Survey Methods, Traditional, Public Opinion Polling

DEFF Research Database (Denmark)

Elmelund-Præstekær, Christian; Hopmann, David Nicolas; Pedersen, Rasmus Tue

2017-01-01

Traditional public opinion polls are surveys in which a random sample of a given population is asked questions about their attitudes, knowledge, or behavior. If conducted properly, the answers from such surveys are approximately representative of the entire population. Traditional public opinion...... polling is typically based on four different methods of data gathering, or combinations hereof: face-to-face, postal surveys, phone surveys, and web surveys. Given that opinion polls are based on a sample, we cannot be sure that the sample reflects public opinion perfectly, however—even if randomness...... is perfect. Moreover, responses may be highly dependent on the contextual information provided with the question. Also, it may be difficult to capture past or complex causes of attitudes or behavior. In short, surveys are a precise way of measuring public opinion, but they do not come without challenges....

Biological variables for the site survey of surface ecosystems - existing data and survey methods

International Nuclear Information System (INIS)

Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt

2000-06-01

In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

Biological variables for the site survey of surface ecosystems - existing data and survey methods

Energy Technology Data Exchange (ETDEWEB)

Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

2000-06-01

In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

Practical methods for radiation survey in nuclear installations

International Nuclear Information System (INIS)

Shweikani, R.

2001-12-01

This study is placed to those who are responsible to perform radiation survey in the nuclear installations, especially the beginners. Therefore, it gives a comprehensive view to all-important aspects related to their work starting from the structure of atoms to the practical steps for radiation survey works. So, it clarify how to perform personal monitoring, methods for monitoring surface contamination, methods for measuring radioactivity of gases and radioactive aerosols in air, monitoring radiation doses, measuring radiation influences in workplaces and finally measuring internal exposure of radiation workers in nuclear installations. Finally, The study shows some cases of breaches of radiation protection rules in some American nuclear installations and describes the final results of these breaches. The aim of this is to assure that any breach or ignore to radiation protection principles may produce bad results, and there is no leniency in implementing environmental radiation protection principles. (author)

METHODS IN THE POST-METHODS ERA. REPORT ON AN INTERNATIONAL SURVEY ON LANGUAGE TEACHING METHODS'

Directory of Open Access Journals (Sweden)

Jun Liu

2004-06-01

Full Text Available Do methods still have a place in 21" century language teaching? To answer this question, an international survey was conducted in the surnmer of 1999. A sample of 800 language teachers world-wide randomly drawn from 17,800 TESOLers were each given a 2-page survey. The return rate was 58.5% with the actual usable data set of448, which was analyzed by using both descriptive and inferential statistics. Among the ten commonly recognized teaching methods surveyed, both the Communicative Language Teaching Approach and an eclectic method seem to have the highest rate in familiarity, preference, and use. But when multiple factors, such as teaching contexts, instructional settings, learners' proficiency levels, class size, teaching experience and educational backgrounds of the teachers, and the status of being a native or nonnative English speaking professional were taken into consideration, various patterns and themes emerged. One interesting finding is that Grammar Translation is still used in EFL contexts, in larger classes, and with learners at low proficiency levels, though the ratio between the actual use of this method and teachers' preference does not match. Based on the results of the survey, a new theoretical framework is proposed to conceptualize language teaching methods in the post-methods era.

The Jamaica asthma and allergies national prevalence survey: rationale and methods

Directory of Open Access Journals (Sweden)

Edwards Nancy C

2010-04-01

Full Text Available Abstract Background Asthma is a significant public health problem in the Caribbean. Prevalence surveys using standardized measures of asthma provide valid prevalence estimates to facilitate regional and international comparisons and monitoring of trends. This paper describes methods used in the Jamaica Asthma and Allergies National Prevalence Survey, challenges associated with this survey and strategies used to overcome these challenges. Methods/Design An island wide, cross-sectional, community-based survey of asthma, asthma symptoms and allergies was done among adults and children using the European Community Respiratory Health Survey Questionnaire for adults and the International Study of Asthma and Allergies in Children. Stratified multi-stage cluster sampling was used to select 2, 163 adults aged 18 years and older and 2, 017 children aged 2-17 years for the survey. The Kish selection table was used to select one adult and one child per household. Data analysis accounted for sampling design and prevalence estimates were weighted to produce national estimates. Discussion The Jamaica Asthma and Allergies National Prevalence Survey is the first population- based survey in the Caribbean to determine the prevalence of asthma and allergies both in adults and children using standardized methods. With response rates exceeding 80% in both groups, this approach facilitated cost-effective gathering of high quality asthma prevalence data that will facilitate international and regional comparison and monitoring of asthma prevalence trends. Another unique feature of this study was the partnership with the Ministry of Health in Jamaica, which ensured the collection of data relevant for decision-making to facilitate the uptake of research evidence. The findings of this study will provide important data on the burden of asthma and allergies in Jamaica and contribute to evidence-informed planning of comprehensive asthma management and education programs.

Optimal power flow: a bibliographic survey II. Non-deterministic and hybrid methods

Energy Technology Data Exchange (ETDEWEB)

Frank, Stephen [Colorado School of Mines, Department of Electrical Engineering and Computer Science, Golden, CO (United States); Steponavice, Ingrida [Univ. of Jyvaskyla, Dept. of Mathematical Information Technology, Agora (Finland); Rebennack, Steffen [Colorado School of Mines, Division of Economics and Business, Golden, CO (United States)

2012-09-15

Over the past half-century, optimal power flow (OPF) has become one of the most important and widely studied nonlinear optimization problems. In general, OPF seeks to optimize the operation of electric power generation, transmission, and distribution networks subject to system constraints and control limits. Within this framework, however, there is an extremely wide variety of OPF formulations and solution methods. Moreover, the nature of OPF continues to evolve due to modern electricity markets and renewable resource integration. In this two-part survey, we survey both the classical and recent OPF literature in order to provide a sound context for the state of the art in OPF formulation and solution methods. The survey contributes a comprehensive discussion of specific optimization techniques that have been applied to OPF, with an emphasis on the advantages, disadvantages, and computational characteristics of each. Part I of the survey provides an introduction and surveys the deterministic optimization methods that have been applied to OPF. Part II of the survey (this article) examines the recent trend towards stochastic, or non-deterministic, search techniques and hybrid methods for OPF. (orig.)

Introductory study of super survey (next generation underground exploration technology); Super survey (jisedai chika tansa gijutsu) no sendo kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

An investigational study was conducted on the R and D trend of innovative technology aiming at high-accuracy/high-efficiency next generation underground exploration technology (super survey technology). Paying attention to the seismic survey and electromagnetic survey, the study was made on technical characteristics, the utilization status and the needs at sites, the R and D trend, etc. As to the present R and D, the development is proceeded with of the time domain method in the electromagnetic survey, the effective quantity data processing/analysis method and the indication method using the reflection method in the elastic survey. As new technology to be noticed, the following are cited: SQUID magnetometer, underground analysis using magnetic deviation data, electromagnetic migration, ACROSS, rotating seismometer, laser Doppler vibrator, etc. Concerning the course of the next generation underground survey technology, a system of the integrated underground exploration theory is considered which is based on a combination of the electromagnetic survey and seismic exploration. In the study, a plan is worked out for research/development of a technology of analyzing the different data obtained. 49 figs., 13 tabs.

Comparing two survey methods for estimating maternal and perinatal mortality in rural Cambodia.

Science.gov (United States)

Chandy, Hoeuy; Heng, Yang Van; Samol, Ha; Husum, Hans

2008-03-01

We need solid estimates of maternal mortality rates (MMR) to monitor the impact of maternal care programs. Cambodian health authorities and WHO report the MMR in Cambodia at 450 per 100,000 live births. The figure is drawn from surveys where information is obtained by interviewing respondents about the survival of all their adult sisters (sisterhood method). The estimate is statistically imprecise, 95% confidence intervals ranging from 260 to 620/100,000. The MMR estimate is also uncertain due to under-reporting; where 80-90% of women deliver at home maternal fatalities may go undetected especially where mortality is highest, in remote rural areas. The aim of this study was to attain more reliable MMR estimates by using survey methods other than the sisterhood method prior to an intervention targeting obstetric rural emergencies. The study was carried out in rural Northwestern Cambodia where access to health services is poor and poverty, endemic diseases, and land mines are endemic. Two survey methods were applied in two separate sectors: a community-based survey gathering data from public sources and a household survey gathering data direct from primary sources. There was no statistically significant difference between the two survey results for maternal deaths, both types of survey reported mortality rates around the public figure. The household survey reported a significantly higher perinatal mortality rate as compared to the community-based survey, 8.6% versus 5.0%. Also the household survey gave qualitative data important for a better understanding of the many problems faced by mothers giving birth in the remote villages. There are detection failures in both surveys; the failure rate may be as high as 30-40%. PRINCIPLE CONCLUSION: Both survey methods are inaccurate, therefore inappropriate for evaluation of short-term changes of mortality rates. Surveys based on primary informants yield qualitative information about mothers' hardships important for the design

Moving beyond Traditional Methods of Survey Validation

Science.gov (United States)

Maul, Andrew

2017-01-01

In his focus article, "Rethinking Traditional Methods of Survey Validation," published in this issue of "Measurement: Interdisciplinary Research and Perspectives," Andrew Maul wrote that it is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as…

Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

OpenAIRE

Yoonjoung Choi; Qingfeng Li; Blake Zachary

2018-01-01

Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR) have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth...

Survey Research: Methods, Issues and the Future

Science.gov (United States)

Brewer, Ernest W.; Torrisi-Steele, Geraldine; Wang, Victor C. X.

2015-01-01

Survey research is prevalent among many professional fields. Both cost effective and time efficient, this method of research is commonly used for the purposes of gaining insight into the attitudes, thoughts, and opinions of populations. Additionally, because there are several types of survey research designs and data collection instruments, the…

Use of radar survey data for engineering-geological studies

Energy Technology Data Exchange (ETDEWEB)

Valyakh, V M; Grafskii, B V

1979-01-01

A description is given of the basic methodical principles underlying the use of aerial survey radar data in regional studies. The basic characteristics of deciphering indicators on the surveys are identified.

Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

Directory of Open Access Journals (Sweden)

Yoonjoung Choi

2018-05-01

Full Text Available Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth month and year, and to estimate TFR adjusted for identified data quality issues. Methods: To assess underestimation from the questionnaire, we simulated births that would be counted using the PMA2020 questionnaires compared to births identified from full birth history. We analyzed the latest Demographic and Health Surveys in ten countries where PMA2020 surveys have been implemented. We assessed the level of reporting completeness for birth month and year and heaping of birth month, analyzing 39 PMA2020 surveys. Finally, TFR were calculated and adjusted for biases introduced from the questionnaire and heaping in birth month. Results: Simple questions introduced minor bias from undercounting multiple births, which was expected and correctable. Meanwhile, incomplete reporting of birth month was relatively high, and the default value of January in data collection software systematically moved births with missing months out of the reference period. On average across the 39 surveys, TFR increased by 1.6Š and 2.4Š, adjusted for undercounted multiple births and heaping on January, respectively. Contribution: This study emphasizes the importance of enumerator training and provides critical insight in software programming in surveys using mobile technologies.

Sample size methods for estimating HIV incidence from cross-sectional surveys.

Science.gov (United States)

Konikoff, Jacob; Brookmeyer, Ron

2015-12-01

Understanding HIV incidence, the rate at which new infections occur in populations, is critical for tracking and surveillance of the epidemic. In this article, we derive methods for determining sample sizes for cross-sectional surveys to estimate incidence with sufficient precision. We further show how to specify sample sizes for two successive cross-sectional surveys to detect changes in incidence with adequate power. In these surveys biomarkers such as CD4 cell count, viral load, and recently developed serological assays are used to determine which individuals are in an early disease stage of infection. The total number of individuals in this stage, divided by the number of people who are uninfected, is used to approximate the incidence rate. Our methods account for uncertainty in the durations of time spent in the biomarker defined early disease stage. We find that failure to account for this uncertainty when designing surveys can lead to imprecise estimates of incidence and underpowered studies. We evaluated our sample size methods in simulations and found that they performed well in a variety of underlying epidemics. Code for implementing our methods in R is available with this article at the Biometrics website on Wiley Online Library. © 2015, The International Biometric Society.

Comparing Traditional and Crowdsourcing Methods for Pretesting Survey Questions

Directory of Open Access Journals (Sweden)

Jennifer Edgar

2016-10-01

Full Text Available Cognitive interviewing is a common method used to evaluate survey questions. This study compares traditional cognitive interviewing methods with crowdsourcing, or “tapping into the collective intelligence of the public to complete a task.” Crowdsourcing may provide researchers with access to a diverse pool of potential participants in a very timely and cost-efficient way. Exploratory work found that crowdsourcing participants, with self-administered data collection, may be a viable alternative, or addition, to traditional pretesting methods. Using three crowdsourcing designs (TryMyUI, Amazon Mechanical Turk, and Facebook, we compared the participant characteristics, costs, and quantity and quality of data with traditional laboratory-based cognitive interviews. Results suggest that crowdsourcing and self-administered protocols may be a viable way to collect survey pretesting information, as participants were able to complete the tasks and provide useful information; however, complex tasks may require the skills of an interviewer to administer unscripted probes.

Strapdown Airborne Gravimetry Quality Assessment Method Based on Single Survey Line Data: A Study by SGA-WZ02 Gravimeter

Science.gov (United States)

Wu, Meiping; Cao, Juliang; Zhang, Kaidong; Cai, Shaokun; Yu, Ruihang

2018-01-01

Quality assessment is an important part in the strapdown airborne gravimetry. Root mean square error (RMSE) evaluation method is a classical way to evaluate the gravimetry quality, but classical evaluation methods are preconditioned by extra flight or reference data. Thus, a method, which is able to largely conquer the premises of classical quality assessment methods and can be used in single survey line, has been developed in this paper. According to theoretical analysis, the method chooses the stability of two horizontal attitude angles, horizontal specific force and vertical specific force as the determinants of quality assessment method. The actual data, collected by SGA-WZ02 from 13 flights 21 lines in certain survey, was used to build the model and elaborate the method. To substantiate the performance of the quality assessment model, the model is applied in extra repeat line flights from two surveys. Compared with internal RMSE, standard deviation of assessment residuals are 0.23 mGal and 0.16 mGal in two surveys, which shows that the quality assessment method is reliable and stricter. The extra flights are not necessary by specially arranging the route of flights. The method, summarized from SGA-WZ02, is a feasible approach to assess gravimetry quality using single line data and is also suitable for other strapdown gravimeters. PMID:29373535

Traditional methods v. new technologies – dilemmas for dietary assessment in large-scale nutrition surveys and studies

DEFF Research Database (Denmark)

Amoutzopoulos, B.; Steer, T.; Roberts, C.

2018-01-01

assessment in population surveys’, was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer...... of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion ‘Traditional methods v. new technologies: dilemmas for dietary......The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses...

Using mark-recapture distance sampling methods on line transect surveys

Science.gov (United States)

Burt, Louise M.; Borchers, David L.; Jenkins, Kurt J.; Marques, Tigao A

2014-01-01

Mark–recapture distance sampling (MRDS) methods are widely used for density and abundance estimation when the conventional DS assumption of certain detection at distance zero fails, as they allow detection at distance zero to be estimated and incorporated into the overall probability of detection to better estimate density and abundance. However, incorporating MR data in DS models raises survey and analysis issues not present in conventional DS. Conversely, incorporating DS assumptions in MR models raises issues not present in conventional MR. As a result, being familiar with either conventional DS methods or conventional MR methods does not on its own put practitioners in good a position to apply MRDS methods appropriately. This study explains the sometimes subtly different varieties of MRDS survey methods and the associated concepts underlying MRDS models. This is done as far as possible without giving mathematical details – in the hope that this will make the key concepts underlying the methods accessible to a wider audience than if we were to present the concepts via equations.

[Data validation methods and discussion on Chinese materia medica resource survey].

Science.gov (United States)

Zhang, Yue; Ma, Wei-Feng; Zhang, Xiao-Bo; Zhu, Shou-Dong; Guo, Lan-Ping; Wang, Xing-Xing

2013-07-01

From the beginning of the fourth national survey of the Chinese materia medica resources, there were 22 provinces have conducted pilots. The survey teams have reported immense data, it put forward the very high request to the database system construction. In order to ensure the quality, it is necessary to check and validate the data in database system. Data validation is important methods to ensure the validity, integrity and accuracy of census data. This paper comprehensively introduce the data validation system of the fourth national survey of the Chinese materia medica resources database system, and further improve the design idea and programs of data validation. The purpose of this study is to promote the survey work smoothly.

Prenotification, Incentives, and Survey Modality: An Experimental Test of Methods to Increase Survey Response Rates of School Principals

Science.gov (United States)

Jacob, Robin Tepper; Jacob, Brian

2012-01-01

Teacher and principal surveys are among the most common data collection techniques employed in education research. Yet there is remarkably little research on survey methods in education, or about the most cost-effective way to raise response rates among teachers and principals. In an effort to explore various methods for increasing survey response…

Methodical recommendations for power unit comprehensive engineering and radiation survey

International Nuclear Information System (INIS)

Nosovskij, A.V.

2000-01-01

The article describes power unit radiation survey methods developed and applied during conduction of Ch NPP unit I Comprehensive Engineering Radiation Survey. Special requirements for units under decommissioning, main survey principals, criteria for definition of volume and the order of survey for various systems of a NPP Unit are included

Survey of systems safety analysis methods and their application to nuclear waste management systems

International Nuclear Information System (INIS)

Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

1981-11-01

This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study

Survey of systems safety analysis methods and their application to nuclear waste management systems

Energy Technology Data Exchange (ETDEWEB)

Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

1981-11-01

This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study.

Underwater photography - A visual survey method

Digital Repository Service at National Institute of Oceanography (India)

Sharma, R.

Content-Type text/plain; charset=UTF-8 173 Underwater photography - A visual survey method Rahul Sharma National Institute of Oceanography, Dona Paula, Goa-403004 rsharma@nio.org Introduction “Photography as a means of observing...-sea photographs were those made by Maurice Ewing and his co-workers during cruises on Atlantis in 1940-48. Their subject was the seafloor and their method of clicking was to trigger the camera mechanically when its mounting struck bottom. This is the only...

Does the Underground Sidewall Station Survey Method Meet MHSA ...

African Journals Online (AJOL)

Grobler, Hendrik

The underground survey network in a deep level platinum mine in ... The time duration for peg installation during the initial phase of learning the method was ..... changes to the survey “hardware” including prisms, stems and attachment points ...

Assessing risk of draft survey by AHP method

Science.gov (United States)

Xu, Guangcheng; Zhao, Kuimin; Zuo, Zhaoying; Liu, Gang; Jian, Binguo; Lin, Yan; Fan, Yukun; Wang, Fei

2018-04-01

The paper assesses the risks of vessel floating in the seawater for draft survey by using the analytic hierarchy process. On this basis, the paper established draft survey risk index from the view of draft reading, ballast water, fresh water, and calculation process and so on. Then the paper proposes the method to deal with risk assessment using one concrete sample.

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

Directory of Open Access Journals (Sweden)

Nederhof Esther

2012-07-01

Full Text Available Abstract Background Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. Methods First, we compared first wave (T1 easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents’ Individual Lives Survey (TRAILS, a prospective population based cohort study of Dutch (preadolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56, 50.8% girls, with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60, 52.3% girls were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP, intelligence (IQ, education, sociometric status, substance use, and psychopathology. Results First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

Science.gov (United States)

2012-01-01

Background Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. Methods First, we compared first wave (T1) easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents’ Individual Lives Survey (TRAILS), a prospective population based cohort study of Dutch (pre)adolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56), 50.8% girls), with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60), 52.3% girls) were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP), intelligence (IQ), education, sociometric status, substance use, and psychopathology. Results First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit) were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005). Conclusions First, extensive

Combining Internet-Based and Postal Survey Methods in a Survey among Gynecologists: Results of a Randomized Trial.

Science.gov (United States)

Ernst, Sinja Alexandra; Brand, Tilman; Lhachimi, Stefan K; Zeeb, Hajo

2018-04-01

To assess whether a combination of Internet-based and postal survey methods (mixed-mode) compared to postal-only survey methods (postal-only) leads to improved response rates in a physician survey, and to compare the cost implications of the different recruitment strategies. All primary care gynecologists in Bremen and Lower Saxony, Germany, were invited to participate in a cross-sectional survey from January to July 2014. The sample was divided into two strata (A; B) depending on availability of an email address. Within each stratum, potential participants were randomly assigned to mixed-mode or postal-only group. In Stratum A, the mixed-mode group had a lower response rate compared to the postal-only group (12.5 vs. 20.2 percent; RR = 0.61, 95 percent CI: 0.44-0.87). In stratum B, no significant differences were found (15.6 vs. 16.2 percent; RR = 0.95, 95 percent CI: 0.62-1.44). Total costs (in €) per valid questionnaire returned (Stratum A: 399.72 vs. 248.85; Stratum B: 496.37 vs. 455.15) and per percentage point of response (Stratum A: 1,379.02 vs. 861.02; Stratum B 1,116.82 vs. 1,024.09) were higher, whereas variable costs were lower in mixed-mode compared to the respective postal-only groups (Stratum A cost ratio: 0.47, Stratum B cost ratio: 0.71). In this study, primary care gynecologists were more likely to participate by traditional postal-only than by mixed-mode survey methods that first offered an Internet option. However, the lower response rate for the mixed-mode method may be partly due to the older age structure of the responding gynecologists. Variable costs per returned questionnaire were substantially lower in mixed-mode groups and indicate the potential for cost savings if the sample population is sufficiently large. © Health Research and Educational Trust.

Survey method for radiological surveys of 300 FF-1 Operable Unit soil and materials

International Nuclear Information System (INIS)

Greif, A.A.

1997-06-01

This technical basis document is to be used to survey soils at the 300-FF-1 Operable Unit during remediation of the site. Its purpose is to provide a basis for the survey methods to be employed by the Radiological Control Technician to determine if excavated areas require continued remediation in accordance with the Record of Decision for the operable unit

National Survey on Access, Use and Promotion of Rational Use of Medicines (PNAUM: household survey component methods

Directory of Open Access Journals (Sweden)

Sotero Serrate Mengue

Full Text Available ABSTRACT OBJECTIVE To describe methodological aspects of the household survey National Survey on Access, Use and Promotion of Rational Use of Medicines (PNAUM related to sampling design and implementation, the actual obtained sample, instruments and fieldwork. METHODS A cross-sectional, population-based study with probability sampling in three stages of the population living in households located in Brazilian urban areas. Fieldwork was carried out between September 2013 and February 2014. The data collection instrument included questions related to: information about households, residents and respondents; chronic diseases and medicines used; use of health services; acute diseases and events treated with drugs; use of contraceptives; use of pharmacy services; behaviors that may affect drug use; package inserts and packaging; lifestyle and health insurance. RESULTS In total, 41,433 interviews were carried out in 20,404 households and 576 urban clusters corresponding to 586 census tracts distributed in the five Brazilian regions, according to eight domains defined by age and gender. CONCLUSIONS The results of the survey may be used as a baseline for future studies aiming to assess the impact of government action on drug access and use. For local studies using a compatible method, PNAUM may serve as a reference point to evaluate variations in space and population. With a comprehensive evaluation of drug-related aspects, PNAUM is a major source of data for a variety of analyses to be carried out both at academic and government level.

Preparing investigation of methods for surveying tree seed demands among farmers in Tanzania

DEFF Research Database (Denmark)

Aabæk, Anders

Insufficient seed supplies is often a major constraint on tree planting activities in developing countries. A central problem is to assess the actual demands for tree seed. This report shall, as a part of a PhD-study, prepare an investigation of different methods for surveying tree seed demands...... and preferences among private farmers in Tanzania. A framework for investigating seed demand and supply is outlined. The role of a national tree seed project in a seed supply sector is discussed and data requirements for strategy on seed procurement and tree improvement are outlined. Earlier surveys on seed...... demand pattern in Tanzania, Uganda and Nicaragua are discussed and a choice of strategy for an extensive survey of seed demand and supply in Tanzania is made. Different data collection methods and tools, e.g. quantitative and qualitative surveys and rapid rural appraisals, are described in detail...

Survey nonresponse among ethnic minorities in a national health survey--a mixed-method study of participation, barriers, and potentials.

Science.gov (United States)

Ahlmark, Nanna; Algren, Maria Holst; Holmberg, Teresa; Norredam, Marie Louise; Nielsen, Signe Smith; Blom, Astrid Benedikte; Bo, Anne; Juel, Knud

2015-01-01

The participation rate in the Danish National Health Survey (DNHS) 2010 was significantly lower among ethnic minorities than ethnic Danes. The purpose was to characterize nonresponse among ethnic minorities in DNHS, analyze variations in item nonresponse, and investigate barriers and incentives to participation. This was a mixed-method study. Logistic regression was used to analyze nonresponse using data from DNHS (N = 177,639 and chi-square tests in item nonresponse analyses. We explored barriers and incentives regarding participation through focus groups and cognitive interviews. Informants included immigrants and their descendants of both sexes, with and without higher education. The highest nonresponse rate was for non-Western descendants (80.0%) and immigrants 25 (72.3%) with basic education. Immigrants and descendants had higher odds ratios (OR = 3.07 and OR = 3.35, respectively) for nonresponse than ethnic Danes when adjusted for sex, age, marital status, and education. Non-Western immigrants had higher item nonresponse in several question categories. Barriers to non-participation related to the content, language, format, and layout of both the questionnaire and the cover letter. The sender and setting in which to receive the questionnaire also influenced answering incentives. We observed differences in barriers and incentives between immigrants and descendants. Nonresponse appears related to linguistic and/or educational limitations, to alienation generated by the questions' focus on disease and cultural assumptions, or mistrust regarding anonymity. Ethnic minorities seem particularly affected by such barriers. To increase survey participation, questions could be sensitized to reflect multicultural traditions, and the impact of sender and setting considered.

Surveying Assessment in Experiential Learning: A Single Campus Study

Directory of Open Access Journals (Sweden)

Thomas Yates

2015-12-01

Full Text Available The purpose of this study was to determine the methods of experiential assessment in use at a Canadian university and the extent to which they are used. Exploring experiential assessment will allow identification of commonly used methods and facilitate the development of best practices of assessment in the context of experiential learning (EL at an institutional level. The origins of EL are found in the work of Dewey (1938, later modified by Kolb and Fry (1975. Experiential methods include: experiential education, service learning problem-based learning and others such as action learning, enquiry-based learning, and case studies. Faculty currently involved in EL at the participating university were invited to complete an online survey about their teaching and assessment methods. This paper will share the results and analysis of the EL inventory survey.

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study.

Science.gov (United States)

Nederhof, Esther; Jörg, Frederike; Raven, Dennis; Veenstra, René; Verhulst, Frank C; Ormel, Johan; Oldehinkel, Albertine J

2012-07-02

Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. First, we compared first wave (T1) easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents' Individual Lives Survey (TRAILS), a prospective population based cohort study of Dutch (pre)adolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56), 50.8% girls), with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60), 52.3% girls) were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP), intelligence (IQ), education, sociometric status, substance use, and psychopathology. First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit) were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005). First, extensive recruitment effort at the first

Research on 3-D terrain correction methods of airborne gamma-ray spectrometry survey

International Nuclear Information System (INIS)

Liu Yanyang; Liu Qingcheng; Zhang Zhiyong

2008-01-01

The general method of height correction is not effectual in complex terrain during the process of explaining airborne gamma-ray spectrometry data, and the 2-D terrain correction method researched in recent years is just available for correction of section measured. A new method of 3-D sector terrain correction is studied. The ground radiator is divided into many small sector radiators by the method, then the irradiation rate is calculated in certain survey distance, and the total value of all small radiate sources is regarded as the irradiation rate of the ground radiator at certain point of aero- survey, and the correction coefficients of every point are calculated which then applied to correct to airborne gamma-ray spectrometry data. The method can achieve the forward calculation, inversion calculation and terrain correction for airborne gamma-ray spectrometry survey in complex topography by dividing the ground radiator into many small sectors. Other factors are considered such as the un- saturated degree of measure scope, uneven-radiator content on ground, and so on. The results of for- ward model and an example analysis show that the 3-D terrain correction method is proper and effectual. (authors)

Does the underground sidewall station survey method meet MHSA ...

African Journals Online (AJOL)

The question is asked whether or not this method of sur-veying will meet the MHSA standards of accuracy that was developed for typical hangingwall traverse type networks. Results obtained from a survey closure using a network of clusters of four sidewall stations demonstrates that under the described circumstances it will ...

Examining Stress in Graduate Assistants: Combining Qualitative and Quantitative Survey Methods

Science.gov (United States)

Mazzola, Joseph J.; Walker, Erin J.; Shockley, Kristen M.; Spector, Paul E.

2011-01-01

The aim of this study was to employ qualitative and quantitative survey methods in a concurrent mixed model design to assess stressors and strains in graduate assistants. The stressors most frequently reported qualitatively were work overload, interpersonal conflict, and organizational constraints; the most frequently reported psychological…

Surveying immigrants without sampling frames - evaluating the success of alternative field methods.

Science.gov (United States)

Reichel, David; Morales, Laura

2017-01-01

This paper evaluates the sampling methods of an international survey, the Immigrant Citizens Survey, which aimed at surveying immigrants from outside the European Union (EU) in 15 cities in seven EU countries. In five countries, no sample frame was available for the target population. Consequently, alternative ways to obtain a representative sample had to be found. In three countries 'location sampling' was employed, while in two countries traditional methods were used with adaptations to reach the target population. The paper assesses the main methodological challenges of carrying out a survey among a group of immigrants for whom no sampling frame exists. The samples of the survey in these five countries are compared to results of official statistics in order to assess the accuracy of the samples obtained through the different sampling methods. It can be shown that alternative sampling methods can provide meaningful results in terms of core demographic characteristics although some estimates differ to some extent from the census results.

An UAV scheduling and planning method for post-disaster survey

Science.gov (United States)

Li, G. Q.; Zhou, X. G.; Yin, J.; Xiao, Q. Y.

2014-11-01

Annually, the extreme climate and special geological environments lead to frequent natural disasters, e.g., earthquakes, floods, etc. The disasters often bring serious casualties and enormous economic losses. Post-disaster surveying is very important for disaster relief and assessment. As the Unmanned Aerial Vehicle (UAV) remote sensing with the advantage of high efficiency, high precision, high flexibility, and low cost, it is widely used in emergency surveying in recent years. As the UAVs used in emergency surveying cannot stop and wait for the happening of the disaster, when the disaster happens the UAVs usually are working at everywhere. In order to improve the emergency surveying efficiency, it is needed to track the UAVs and assign the emergency surveying task for each selected UAV. Therefore, a UAV tracking and scheduling method for post-disaster survey is presented in this paper. In this method, Global Positioning System (GPS), and GSM network are used to track the UAVs; an emergency tracking UAV information database is built in advance by registration, the database at least includes the following information, e.g., the ID of the UAVs, the communication number of the UAVs; when catastrophe happens, the real time location of all UAVs in the database will be gotten using emergency tracking method at first, then the traffic cost time for all UAVs to the disaster region will be calculated based on the UAVs' the real time location and the road network using the nearest services analysis algorithm; the disaster region is subdivided to several emergency surveying regions based on DEM, area, and the population distribution map; the emergency surveying regions are assigned to the appropriated UAV according to shortest cost time rule. The UAVs tracking and scheduling prototype is implemented using SQLServer2008, ArcEnginge 10.1 SDK, Visual Studio 2010 C#, Android, SMS Modem, and Google Maps API.

A Survey of Formal Methods in Software Development

DEFF Research Database (Denmark)

Bjørner, Dines

2012-01-01

The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

Survey of electronic payment methods and systems

NARCIS (Netherlands)

Havinga, Paul J.M.; Smit, Gerardus Johannes Maria; Helme, A.; Verbraeck, A.

1996-01-01

In this paper an overview of electronic payment methods and systems is given. This survey is done as part of the Moby Dick project. Electronic payment systems can be grouped into three broad classes: traditional money transactions, digital currency and creditdebit payments. Such payment systems have

Estimating health expectancies from two cross-sectional surveys: The intercensal method

Directory of Open Access Journals (Sweden)

Michel Guillot

2009-10-01

Full Text Available Health expectancies are key indicators for monitoring the health of populations, as well as for informing debates about compression or expansion of morbidity. However, current methodologies for estimating them are not entirely satisfactory. They are either of limited applicability because of high data requirements (the multistate method or based on questionable assumptions (the Sullivan method. This paper proposes a new method, called the "intercensal" method, which relies on the multistate framework but uses widely available data. The method uses age-specific proportions "healthy" at two successive, independent cross-sectional health surveys, and, together with information on general mortality, solves for the set of transition probabilities that produces the observed sequence of proportions healthy. The system is solved by making realistic parametric assumptions about the age patterns of transition probabilities. Using data from the Health and Retirement Survey (HRS and from the National Health Interview Survey (NHIS, the method is tested against both the multistate method and the Sullivan method. We conclude that the intercensal approach is a promising framework for the indirect estimation of health expectancies.

A Study on the Representative Sampling Survey for Radionuclide Analysis of RI Waste

Energy Technology Data Exchange (ETDEWEB)

Jee, K. Y. [KAERI, Daejeon (Korea, Republic of); Kim, Juyoul; Jung, Gunhyo [FNC Tech. Co., Daejeon (Korea, Republic of)

2007-07-15

We developed a quantitative method for attaining a representative sample during sampling survey of RI waste. Considering a source, process, and type of RI waste, the method computes the number of sample, confidence interval, variance, and coefficient of variance. We also systematize the method of sampling survey logically and quantitatively. The result of this study can be applied to sampling survey of low- and intermediate-level waste generated from nuclear power plant during the transfer process to disposal facility.

The Cornella Health Interview Survey Follow-Up (CHIS.FU Study: design, methods, and response rate

Directory of Open Access Journals (Sweden)

Perez Gloria

2003-03-01

Full Text Available Abstract Background The aim of this report is to describe the main characteristics of the design, including response rates, of the Cornella Health Interview Survey Follow-up Study. Methods The original cohort consisted of 2,500 subjects (1,263 women and 1,237 men interviewed as part of the 1994 Cornella Health Interview Study. A record linkage to update the address and vital status of the cohort members was carried out using, first a deterministic method, and secondly a probabilistic one, based on each subject's first name and surnames. Subsequently, we attempted to locate the cohort members to conduct the phone follow-up interviews. A pilot study was carried out to test the overall feasibility and to modify some procedures before the field work began. Results After record linkage, 2,468 (98.7% subjects were successfully traced. Of these, 91 (3.6% were deceased, 259 (10.3% had moved to other towns, and 50 (2.0% had neither renewed their last municipal census documents nor declared having moved. After using different strategies to track and to retain cohort members, we traced 92% of the CHIS participants. From them, 1,605 subjects answered the follow-up questionnaire. Conclusion The computerized record linkage maximized the success of the follow-up that was carried out 7 years after the baseline interview. The pilot study was useful to increase the efficiency in tracing and interviewing the respondents.

Survey Study of Trunk Materials for Direct ATRP Grafting

Energy Technology Data Exchange (ETDEWEB)

Saito, Tomonori [ORNL; Chatterjee, Sabornie [ORNL; Johnson, Joseph C. [ORNL; Dai, Sheng [ORNL; Brown, Suree [ORNL

2015-02-01

In previous study, we demonstrated a new method to prepare polymeric fiber adsorbents via a chemical-grafting method, namely atom-transfer radical polymerization (ATRP), and identified parameters affecting their uranium adsorption capacity. However, ATRP chemical grafting in the previous study still utilized conventional radiation-induced graft polymerization (RIGP) to introduce initiation sites on fibers. Therefore, the objective of the present study is to perform survey study of trunk fiber materials for direct ATRP chemical grafting method without RIGP for the preparation of fiber adsorbents for uranium recovery from seawater.

Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

Directory of Open Access Journals (Sweden)

Simms Victoria

2007-03-01

Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

Evaluation of methods to calibrate radiation survey meters

International Nuclear Information System (INIS)

Robinson, R.C.; Arbeau, N.D.

1987-04-01

Calibration requirements for radiation survey meters used in industrial radiography have been reviewed. Information obtained from a literature search, discussions with CSLD inspectors and firms performing calibrations has been considered. Based on this review a set of minimum calibration requirements was generated which, when met, will determine that the survey meter is suited for measurements described in the current AEC Regulations that apply to industrial radiography equipment. These requirements are presented in this report and may be used as guidelines for evaluating calibration methods proposed or in use in industry. 39 refs

Transport survey calculations using the spectral collocation method

International Nuclear Information System (INIS)

Painter, S.L.; Lyon, J.F.

1989-01-01

A novel transport survey code has been developed and is being used to study the sensitivity of stellarator reactor performance to various transport assumptions. Instead of following one of the usual approaches, the steady-state transport equation are solved in integral form using the spectral collocation method. This approach effectively combine the computational efficiency of global models with the general nature of 1-D solutions. A compact torsatron reactor test case was used to study the convergence properties and flexibility of the new method. The heat transport model combined Shaing's model for ripple-induced neoclassical transport, the Chang-Hinton model for axisymmetric neoclassical transport, and neoalcator scaling for anomalous electron heat flux. Alpha particle heating, radiation losses, classical electron-ion heat flow, and external heating were included. For the test problem, the method exhibited some remarkable convergence properties. As the number of basis functions was increased, the maximum, pointwise error in the integrated power balance decayed exponentially until the numerical noise level as reached. Better than 10% accuracy in the globally-averaged quantities was achieved with only 5 basis functions; better than 1% accuracy was achieved with 10 basis functions. The numerical method was also found to be very general. Extreme temperature gradients at the plasma edge which sometimes arise from the neoclassical models and are difficult to resolve with finite-difference methods were easily resolved. 8 refs., 6 figs

The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

Science.gov (United States)

Oemler Jr., Augustus; Dressler, Alan; Gladders, Michael G.; Rigby, Jane R.; Bai, Lei; Kelson, Daniel; Villanueva, Edward; Fritz, Jacopo; Rieke, George; Poggianti, Bianca M.;

THE IMACS CLUSTER BUILDING SURVEY. I. DESCRIPTION OF THE SURVEY AND ANALYSIS METHODS

Energy Technology Data Exchange (ETDEWEB)

Oemler, Augustus Jr.; Dressler, Alan; Kelson, Daniel; Villanueva, Edward [Observatories of the Carnegie Institution for Science, 813 Santa Barbara St., Pasadena, CA 91101-1292 (United States); Gladders, Michael G. [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States); Rigby, Jane R. [Observational Cosmology Lab, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Bai Lei [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H4 (Canada); Fritz, Jacopo [Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281 S9, B-9000 Gent (Belgium); Rieke, George [Steward Observatory, University of Arizona, Tucson, AZ 8572 (United States); Poggianti, Bianca M.; Vulcani, Benedetta, E-mail: oemler@obs.carnegiescience.edu [INAF-Osservatorio Astronomico di Padova, Vicolo dell' Osservatorio 5, I-35122 Padova (Italy)

2013-06-10

The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines. With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

Optimum survey methods when interviewing employed women.

Science.gov (United States)

Dunning, Kari; LeMasters, Grace K

2009-02-01

While survey studies have examined bias much is unknown regarding specific subpopulations, especially women workers. A population based phone, Internet, and mail survey of workplace falls during pregnancy was undertaken. Participation by industry and occupation and survey approach and bias, reliability, and incomplete data were examined. Of the 3,997 women surveyed, 71% were employed during their pregnancy. Internet responders were most likely to be employed while pregnant and to report a workplace fall at 8.8% compared to 5.8% and 6.1% for mail and phone respondents. Internet responders had the most missing employment data with company name missing for 17.9% compared to 1.3% for phone responders. Mail surveys were best for recruiting those employed in eight of nine industries, and this was especially true for service occupations. To decrease bias and increase participation, mixed approaches may be useful with particular attention for collecting occupational data. Am. J. Ind. Med. 52:105-112, 2009. (c) 2008 Wiley-Liss, Inc.

Survey Method for Radiological Surveys of 300-FF-1 Operable Unit Soils and Material

International Nuclear Information System (INIS)

Brehm, D.M.

1998-06-01

This technical basis is to be used to survey soils at the 300-FF-1 Operable Unit during remediation of the site. Its purpose is to provide a basis for the survey methods to be employed by radiological control technician (RCTs) to guide the excavation effort in accordance with the 300-FF-1 waste site Record of Decision (ROD). The ROD for the 300-FF-1 Operable Unit requires selective excavation, removal, and disposal of contaminated soil above 350 pCi/g total uranium activity. Soil above this level will be disposed of as radioactive waste. The remaining soil will remain onsite

Radiological decontamination, survey, and statistical release method for vehicles

International Nuclear Information System (INIS)

Goodwill, M.E.; Lively, J.W.; Morris, R.L.

1996-06-01

Earth-moving vehicles (e.g., dump trucks, belly dumps) commonly haul radiologically contaminated materials from a site being remediated to a disposal site. Traditionally, each vehicle must be surveyed before being released. The logistical difficulties of implementing the traditional approach on a large scale demand that an alternative be devised. A statistical method for assessing product quality from a continuous process was adapted to the vehicle decontamination process. This method produced a sampling scheme that automatically compensates and accommodates fluctuating batch sizes and changing conditions without the need to modify or rectify the sampling scheme in the field. Vehicles are randomly selected (sampled) upon completion of the decontamination process to be surveyed for residual radioactive surface contamination. The frequency of sampling is based on the expected number of vehicles passing through the decontamination process in a given period and the confidence level desired. This process has been successfully used for 1 year at the former uranium millsite in Monticello, Utah (a cleanup site regulated under the Comprehensive Environmental Response, Compensation, and Liability Act). The method forces improvement in the quality of the decontamination process and results in a lower likelihood that vehicles exceeding the surface contamination standards are offered for survey. Implementation of this statistical sampling method on Monticello projects has resulted in more efficient processing of vehicles through decontamination and radiological release, saved hundreds of hours of processing time, provided a high level of confidence that release limits are met, and improved the radiological cleanliness of vehicles leaving the controlled site

A Survey of Various Object Oriented Requirement Engineering Methods

OpenAIRE

Anandi Mahajan; Dr. Anurag Dixit

2013-01-01

In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

FY 2000 report on the survey for introduction of the hot spring effect prediction method in the geothermal development promotion survey. Improvement of the hot spring effect prediction method in the geothermal development promotion survey; 2000 nendo chinetsu kaihatsu sokushin chosa. Onsen eikyo yosoku shuho donyu chosa - Chinetsu kaihatsu sokushin chosa ni okeru onsen eikyo yosoku shuho no kairyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Supposing the case where the geothermal development promotion survey was carried out in promising geothermal areas in Japan, investigational study was conducted on possibilities of introducing the hot spring effect prediction method, improvement of the method, etc. In the survey, adjustment/classification of formation mechanisms of hot spring were made. For each of the formation mechanisms, the mechanisms in case of the geothermal development having effects were studied/summarized. As to how effects are brought about, presumed were the lowering of water level and decrease in discharge amount in accordance with the decreasing pressure and the dilution by increase in mixture of the ground water around the area. Also cited were the vaporization of hot spring aquifers by the increasing rate of vapor inflow, etc. For the introduction of the hot spring effect prediction method to the geothermal development promotion survey, the problem is short supply of various data, and the examination for it was made. Based on the results of the survey, items to be studied in case of introducing the hot spring effect prediction method were selected. Further, the hot spring effect prediction flow in case of introducing surface survey and well survey was made out. (NEDO)

Social networking versus facebook advertising to recruit survey respondents: a quasi-experimental study.

Science.gov (United States)

Gilligan, Conor; Kypri, Kypros; Bourke, Jesse

2014-09-17

Increasingly, social contact and knowledge of other people's attitudes and behavior are mediated by online social media such as Facebook. The main research to which this recruitment study pertains investigates the influence of parents on adolescent alcohol consumption. Given the pervasiveness of online social media use, Facebook may be an effective means of recruitment and intervention delivery. The objective of the study was to determine the efficacy of study recruitment via social networks versus paid advertising on Facebook. We conducted a quasi-experimental sequential trial with response rate as the outcome, and estimates of cost-effectiveness. The target population was parents of 13-17 year old children attending high schools in the Hunter region of New South Wales, Australia. Recruitment occurred via: method (1) social recruitment using Facebook, email-based, social networks, and media coverage followed by method (2) Facebook advertising. Using a range of online and other social network approaches only: method (1) 74 parents were recruited to complete a survey over eight months, costing AUD58.70 per completed survey. After Facebook advertising: method (2) 204 parents completed the survey over four weeks, costing AUD5.94 per completed survey. Participants were representative of the parents recruited from the region's schools using standard mail and email. Facebook advertising is a cost-effective means of recruiting parents, a group difficult to reach by other methods.

Social Networking Versus Facebook Advertising to Recruit Survey Respondents: A Quasi-Experimental Study

Science.gov (United States)

Kypri, Kypros; Bourke, Jesse

2014-01-01

Background Increasingly, social contact and knowledge of other people’s attitudes and behavior are mediated by online social media such as Facebook. The main research to which this recruitment study pertains investigates the influence of parents on adolescent alcohol consumption. Given the pervasiveness of online social media use, Facebook may be an effective means of recruitment and intervention delivery. Objective The objective of the study was to determine the efficacy of study recruitment via social networks versus paid advertising on Facebook. Methods We conducted a quasi-experimental sequential trial with response rate as the outcome, and estimates of cost-effectiveness. The target population was parents of 13-17 year old children attending high schools in the Hunter region of New South Wales, Australia. Recruitment occurred via: method (1) social recruitment using Facebook, email-based, social networks, and media coverage followed by method (2) Facebook advertising. Results Using a range of online and other social network approaches only: method (1) 74 parents were recruited to complete a survey over eight months, costing AUD58.70 per completed survey. After Facebook advertising: method (2) 204 parents completed the survey over four weeks, costing AUD5.94 per completed survey. Participants were representative of the parents recruited from the region’s schools using standard mail and email. Conclusions Facebook advertising is a cost-effective means of recruiting parents, a group difficult to reach by other methods. PMID:25230740

A meta-study investigating the sources of protest behaviour in stated preference surveys

DEFF Research Database (Denmark)

Mørkbak, Morten Raun; Olsen, Søren Bøye; Meyerhoff, Jürgen

method, the question format, etc., then simply expelling protesters from surveys will lead to sample selection issues. Furthermore, WTP estimates will not be comparable across surveys. This paper seeks to explore potential causes of protest behaviour through a meta-study based on data from 10 different...... surveys. The objective of the study is to examine the effect of respondent specific variables as well as survey specific variables on protest behaviour. Our results suggest that some of the differences in WTP typically observed between different demographic groups, different elicitation formats...

Short assessment of the Big Five: robust across survey methods except telephone interviewing.

Science.gov (United States)

Lang, Frieder R; John, Dennis; Lüdtke, Oliver; Schupp, Jürgen; Wagner, Gert G

2011-06-01

We examined measurement invariance and age-related robustness of a short 15-item Big Five Inventory (BFI-S) of personality dimensions, which is well suited for applications in large-scale multidisciplinary surveys. The BFI-S was assessed in three different interviewing conditions: computer-assisted or paper-assisted face-to-face interviewing, computer-assisted telephone interviewing, and a self-administered questionnaire. Randomized probability samples from a large-scale German panel survey and a related probability telephone study were used in order to test method effects on self-report measures of personality characteristics across early, middle, and late adulthood. Exploratory structural equation modeling was used in order to test for measurement invariance of the five-factor model of personality trait domains across different assessment methods. For the short inventory, findings suggest strong robustness of self-report measures of personality dimensions among young and middle-aged adults. In old age, telephone interviewing was associated with greater distortions in reliable personality assessment. It is concluded that the greater mental workload of telephone interviewing limits the reliability of self-report personality assessment. Face-to-face surveys and self-administrated questionnaire completion are clearly better suited than phone surveys when personality traits in age-heterogeneous samples are assessed.

Methods of the National Nutrition Survey 1999 Metodología de la Encuesta Nacional de Nutrición 1999

OpenAIRE

Elsa Resano-Pérez; Ignacio Méndez-Ramírez; Teresa Shamah-Levy; Juan A Rivera; Jaime Sepúlveda-Amor

2003-01-01

OBJECTIVE: To describe the methods and analyses of the 1999 National Nutrition Survey (NNS-99). MATERIAL AND METHODS: The 1999 National Nutrition Survey (NNS-99) is a probabilistic survey with nationwide representativity. The NNS-99 included four regions and urban and rural areas of Mexico. The last sampling units were households, selected through stratified cluster sampling. The study population consisted of children under five years of age, school-age children (6-11 years), and women of chi...

A Survey of Functional Behavior Assessment Methods Used by Behavior Analysts in Practice

Science.gov (United States)

Oliver, Anthony C.; Pratt, Leigh A.; Normand, Matthew P.

2015-01-01

To gather information about the functional behavior assessment (FBA) methods behavior analysts use in practice, we sent a web-based survey to 12,431 behavior analysts certified by the Behavior Analyst Certification Board. Ultimately, 724 surveys were returned, with the results suggesting that most respondents regularly use FBA methods, especially…

A Socratic Method for Surveying Students' Readiness to Study Evolution

Science.gov (United States)

Stansfield, William D.

2013-01-01

Before beginning a series of presentations on evolution, it would be prudent to survey the general level of students' understanding of prerequisite basic concepts of reproduction, heredity, ontology, and phenotypic diversity so that teachers can avoid devoting time to well-known subjects of general knowledge and can spend more time on subjects…

Proper survey methods for research of aquatic plant ecology and management

Science.gov (United States)

Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

Survey Definitions of Gout for Epidemiologic Studies: Comparison With Crystal Identification as the Gold Standard

NARCIS (Netherlands)

Dalbeth, N.; Schumacher, H.R.; Fransen, J.; Neogi, T.; Jansen, T.L; Brown, M.; Louthrenoo, W.; Vazquez-Mellado, J.; Eliseev, M.; McCarthy, G.; Stamp, L.K.; Perez-Ruiz, F.; Sivera, F.; Ea, H.K.; Gerritsen, M.; Scire, C.A.; Cavagna, L.; Lin, C.; Chou, Y.Y.; Tausche, A.K.; Rocha Castelar-Pinheiro, G. da; Janssen, M; Chen, J.H.; Cimmino, M.A.; Uhlig, T.; Taylor, W.J.

2016-01-01

OBJECTIVE: To identify the best-performing survey definition of gout from items commonly available in epidemiologic studies. METHODS: Survey definitions of gout were identified from 34 epidemiologic studies contributing to the Global Urate Genetics Consortium (GUGC) genome-wide association study.

Research and application of soil-mercury-surveys method for locating uranium

International Nuclear Information System (INIS)

You Yunfei; Lu Shili; Jiao Zongrun

1995-06-01

Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

Case Study: What Makes a Good Case, Revisited: The Survey Monkey Tells All

Science.gov (United States)

Herried, Clyde Freeman; Prud'homme-Genereux, Annie; Schiller, Nancy A.; Herreid, Ky F.; Wright, Carolyn

2016-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. In this month's issue the authors provide a more definitive answer to the "What Makes a Good Case?" question based on a just-completed Survey Monkey survey given to NCCSTS teachers.

A review of neutron scattering correction for the calibration of neutron survey meters using the shadow cone method

Energy Technology Data Exchange (ETDEWEB)

Kim, Sang In; Kim, Bong Hwan; Kim, Jang Lyul; Lee, Jung Il [Health Physics Team, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-12-15

The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a {sup 252}Californium ({sup 252}Cf) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1 - 9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered.

A review of neutron scattering correction for the calibration of neutron survey meters using the shadow cone method

International Nuclear Information System (INIS)

Kim, Sang In; Kim, Bong Hwan; Kim, Jang Lyul; Lee, Jung Il

2015-01-01

The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a 252 Californium ( 252 Cf) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1 - 9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered

Comparison of Health Examination Survey Methods in Brazil, Chile, Colombia, Mexico, England, Scotland, and the United States.

Science.gov (United States)

Mindell, Jennifer S; Moody, Alison; Vecino-Ortiz, Andres I; Alfaro, Tania; Frenz, Patricia; Scholes, Shaun; Gonzalez, Silvia A; Margozzini, Paula; de Oliveira, Cesar; Sanchez Romero, Luz Maria; Alvarado, Andres; Cabrera, Sebastián; Sarmiento, Olga L; Triana, Camilo A; Barquera, Simón

2017-09-15

Comparability of population surveys across countries is key to appraising trends in population health. Achieving this requires deep understanding of the methods used in these surveys to examine the extent to which the measurements are comparable. In this study, we obtained detailed protocols of 8 nationally representative surveys from 2007-2013 from Brazil, Chile, Colombia, Mexico, the United Kingdom (England and Scotland), and the United States-countries that that differ in economic and inequity indicators. Data were collected on sampling frame, sample selection procedures, recruitment, data collection methods, content of interview and examination modules, and measurement protocols. We also assessed their adherence to the World Health Organization's "STEPwise Approach to Surveillance" framework for population health surveys. The surveys, which included half a million participants, were highly comparable on sampling methodology, survey questions, and anthropometric measurements. Heterogeneity was found for physical activity questionnaires and biological samples collection. The common age range included by the surveys was adults aged 18-64 years. The methods used in these surveys were similar enough to enable comparative analyses of the data across the 7 countries. This comparability is crucial in assessing and comparing national and subgroup population health, and to assisting the transfer of research and policy knowledge across countries. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Identifying research priorities for public health research to address health inequalities: use of Delphi-like survey methods.

Science.gov (United States)

Turner, S; Ollerhead, E; Cook, A

2017-10-09

In the funding of health research and public health research it is vital that research questions posed are important and that funded research meets a research need or a gap in evidence. Many methods are used in the identification of research priorities, however, these can be resource intensive, costly and logistically challenging. Identifying such research priorities can be particularly challenging for complex public health problems as there is a need to consult a number of experts across disciplines and with a range of expertise. This study investigated the use of Delphi-like survey methods in identifying important research priorities relating to health inequalities and framing tractable research questions for topic areas identified. The study was conducted in two phases, both using Delphi-like survey methods. Firstly, public health professionals with an interest in health inequalities were asked to identify research priorities. Secondly academic researchers were asked to frame tractable research questions relating to the priorities identified. These research priorities identified using Delphi-like survey methods were subsequently compared to those identified using different methods. A total of 52 public health professionals and 21 academics across the United Kingdom agreed to take part. The response rates were high, from public health professionals across three survey rounds (69%, 50% and 40%) and from academics across one round (52%), indicating that participants were receptive to the method and motivated to respond. The themes identified as encompassing the most important research priorities were mental health, healthy environment and health behaviours. Within these themes, the topic areas that emerged most strongly included community interventions for prevention of mental health problems and the food and alcohol environment. Some responses received from academic researchers were (as requested) in the form of tractable research questions, whereas others

Survey of evaluation methods for thermal striping in FBR structures

International Nuclear Information System (INIS)

Miura, Naoki; Nitta, Akito; Take, Kohji

1988-01-01

In the upper core structures or the sodium mixing tee of Fast Breeder Reactors, sodium mixing streams which are at different temperatures produce rapid temperature fluctuations, namely 'thermal striping', upon component surfaces, and it is apprehended that the high-cycle thermal fatigue causes the crack initiation and propagation. The thermal striping is one of the factors which is considered in FBR component design, however, the standard evaluation method has not built up yet because of the intricacy of that mechanism, the difficulty of an actual proof, the lack of data, and so on. In this report, it is intended to survey of the datails and the present situation of the evaluation method of crack initiation and propagation due to thermal striping, and study the appropriate method which will be made use of the rationalization of design. So it is ascertained that the method which use a quantitative prediction of crack propagation is optimum to evaluate the thermal striping phenomenon. (author)

Improved methods to deduct trip legs and mode from travel surveys using wearable GPS devices: A case study from the Greater Copenhagen area

DEFF Research Database (Denmark)

Rasmussen, Thomas Kjær; Ingvardson, Jesper Bláfoss; Halldórsdóttir, Katrín

2015-01-01

GPS data collection has become an important means of investigating travel behaviour. This is because such data ideally provide far more detailed information on route choice and travel patterns over a longer time period than possible from traditional travel survey methods. Wearing a GPS unit...... the specification of the model parameters and thresholds. The method thus makes it possible to use GPS for travel surveys in large-scale multi-modal networks....

Comparative Study of Complex Survey Estimation Software in ONS

Directory of Open Access Journals (Sweden)

Andy Fallows

2015-09-01

Full Text Available Many official statistics across the UK Government Statistical Service (GSS are produced using data collected from sample surveys. These survey data are used to estimate population statistics through weighting and calibration techniques. For surveys with complex or unusual sample designs, the weighting can be fairly complicated. Even in more simple cases, appropriate software is required to implement survey weighting and estimation. As with other stages of the survey process, it is preferable to use a standard, generic calibration tool wherever possible. Standard tools allow for efficient use of resources and assist with the harmonisation of methods. In the case of calibration, the Office for National Statistics (ONS has experience of using the Statistics Canada Generalized Estimation System (GES across a range of business and social surveys. GES is a SAS-based system and so is only available in conjunction with an appropriate SAS licence. Given recent initiatives and encouragement to investigate open source solutions across government, it is appropriate to determine whether there are any open source calibration tools available that can provide the same service as GES. This study compares the use of GES with the calibration tool ‘R evolved Generalized software for sampling estimates and errors in surveys’ (ReGenesees available in R, an open source statistical programming language which is beginning to be used in many statistical offices. ReGenesees is a free R package which has been developed by the Italian statistics office (Istat and includes functionality to calibrate survey estimates using similar techniques to GES. This report describes analysis of the performance of ReGenesees in comparison to GES to calibrate a representative selection of ONS surveys. Section 1.1 provides a brief introduction to the current use of SAS and R in ONS. Section 2 describes GES and ReGenesees in more detail. Sections 3.1 and 3.2 consider methods for

Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

Science.gov (United States)

Rydlund, Jr., Paul H.; Densmore, Brenda K.

2012-01-01

Geodetic surveys have evolved through the years to the use of survey-grade (centimeter level) global positioning to perpetuate and post-process vertical datum. The U.S. Geological Survey (USGS) uses Global Navigation Satellite Systems (GNSS) technology to monitor natural hazards, ensure geospatial control for climate and land use change, and gather data necessary for investigative studies related to water, the environment, energy, and ecosystems. Vertical datum is fundamental to a variety of these integrated earth sciences. Essentially GNSS surveys provide a three-dimensional position x, y, and z as a function of the North American Datum of 1983 ellipsoid and the most current hybrid geoid model. A GNSS survey may be approached with post-processed positioning for static observations related to a single point or network, or involve real-time corrections to provide positioning "on-the-fly." Field equipment required to facilitate GNSS surveys range from a single receiver, with a power source for static positioning, to an additional receiver or network communicated by radio or cellular for real-time positioning. A real-time approach in its most common form may be described as a roving receiver augmented by a single-base station receiver, known as a single-base real-time (RT) survey. More efficient real-time methods involving a Real-Time Network (RTN) permit the use of only one roving receiver that is augmented to a network of fixed receivers commonly known as Continually Operating Reference Stations (CORS). A post-processed approach in its most common form involves static data collection at a single point. Data are most commonly post-processed through a universally accepted utility maintained by the National Geodetic Survey (NGS), known as the Online Position User Service (OPUS). More complex post-processed methods involve static observations among a network of additional receivers collecting static data at known benchmarks. Both classifications provide users

Survey of Technetium Analytical Production Methods Supporting Hanford Nuclear Materials Processing

International Nuclear Information System (INIS)

TROYER, G.L.

1999-01-01

This document provides a historical survey of analytical methods used for measuring 99 Tc in nuclear fuel reprocessing materials and wastes at Hanford. Method challenges including special sludge matrices tested are discussed. Special problems and recommendations are presented

Analytical methods manual for the Mineral Resource Surveys Program, U.S. Geological Survey

Science.gov (United States)

Arbogast, Belinda F.

1996-01-01

The analytical methods validated by the Mineral Resource Surveys Program, Geologic Division, is the subject of this manual. This edition replaces the methods portion of Open-File Report 90-668 published in 1990. Newer methods may be used which have been approved by the quality assurance (QA) project and are on file with the QA coordinator.This manual is intended primarily for use by laboratory scientists; this manual can also assist laboratory users to evaluate the data they receive. The analytical methods are written in a step by step approach so that they may be used as a training tool and provide detailed documentation of the procedures for quality assurance. A "Catalog of Services" is available for customer (submitter) use with brief listings of:the element(s)/species determined,method of determination,reference to cite,contact person,summary of the technique,and analyte concentration range.For a copy please contact the Branch office at (303) 236-1800 or fax (303) 236-3200.

Establishing survey validity and reliability for American Indians through "think aloud" and test-retest methods.

Science.gov (United States)

Hauge, Cindy Horst; Jacobs-Knight, Jacque; Jensen, Jamie L; Burgess, Katherine M; Puumala, Susan E; Wilton, Georgiana; Hanson, Jessica D

2015-06-01

The purpose of this study was to use a mixed-methods approach to determine the validity and reliability of measurements used within an alcohol-exposed pregnancy prevention program for American Indian women. To develop validity, content experts provided input into the survey measures, and a "think aloud" methodology was conducted with 23 American Indian women. After revising the measurements based on this input, a test-retest was conducted with 79 American Indian women who were randomized to complete either the original measurements or the new, modified measurements. The test-retest revealed that some of the questions performed better for the modified version, whereas others appeared to be more reliable for the original version. The mixed-methods approach was a useful methodology for gathering feedback on survey measurements from American Indian participants and in indicating specific survey questions that needed to be modified for this population. © The Author(s) 2015.

A Study for Optimum Survey Method of Underwater Structure Using the Dual Sonar Sensor

Directory of Open Access Journals (Sweden)

Youngseok Kim

2017-01-01

Full Text Available We have developed dual sonar equipment and an improved operating method for improving resolution in order to solve the problems of limitations of the optical equipment and the application method of SSS (side scan sonar in the investigation of damage of underwater structures. We analyzed the influence factors of the resolution of sonar data through the comparison of resolution and data quality in indoor test. Also we confirmed the problems about the overlapping area of the dual sonar. Depth and distance were analyzed as major influencing factors for survey angle. Specimens were scanned while adjusting distance and towfish angle according to depth change in order to verify applicability of the developed dual sonar in the field experiment. Optimal resolution was found to be 3 cm in specimen spacing, and 20 sample data items were extracted. We developed the regression model based on the multiple regression analysis and developed the RealDualSONAR-DAQ tool, the dual sonar optimum operating method program based on proposed correlation equations. We can use the developed tools to get the value of the major influencing factors for dual sonar operation and obtain high quality sonar data to analyze damage of underwater structures.

Web-based Survey Data Collection With Peer Support and Advocacy Organizations: Implications of Participatory Methods.

Science.gov (United States)

Ostrow, Laysha; Penney, Darby; Stuart, Elizabeth; Leaf, Phillip J

2017-01-01

The 2012 National Survey of Peer-Run Organizations is one of the first to survey a nationally representative sample of mental health peer-run organizations, nonprofit venues for support and advocacy which are defined by people with psychiatric histories being in positions of authority and control. This paper describes data collection methods and demonstrates how participatory strategies to involve people with psychiatric histories intersected with Internet research to achieve study aims. People with psychiatric histories were involved in designing and implementing a web-based survey to collect data on peer-run organizations' operations and views on national policy. Participatory approaches were used throughout design, data collection analysis, and dissemination. The extensive involvement of people with psychiatric histories in project design and implementation were important strategies that contributed to this study's success.

[A qualitative study to validate the Work and Career (Santé et Itinéraire Professionnel) statistical survey: principles and methods].

Science.gov (United States)

Guiho-Bailly, Marie-Pierre; Roquelaure, Yves

2013-01-01

The population-based survey "Santé et itinéraire professionnel" (SIP) aims to investigate the relationship between health and career. A qualitative study was conducted to identify potential biases in the design of the questionnaire. The Laboratoire d'ergonomie et d'épidémiologie en santé au travail (research center on "Ergonomics and Epidemiology in Occupational Health" based at the University of Angers, France) recently conducted a study entitled "Rapport subjectif au travail, sens des trajets professionnels et construction de la santé" ("The subjective perception of work, career paths and the construction of health"). Individual interviews were conducted with thirty survey respondents (irrespective of whether they had reported any health problems or established a link between a health event and their career path) by two experts in the psychodynamics of work. The analysis of the clinical and statistical data involved four stages: a study of an initial test case, a comparison of monographs and reports drawn up by the DREES/DARES, an analysis of questionnaire responses, and an analysis of thirty monographs. MAIN RESULTS AND DISCUSSION: After an examination of the results in relation to sample composition and the method used, the study shows that the relationship between health and career is not overestimated, but also indicates that psychological and musculoskeletal disorders and "minor" work accidents tend to be underreported. The study also found a loss of information about professional mobility as a way of maintaining health. Based on a qualitative approach to validation, the proposed method provides a basis for assessing the design of the questionnaire and provides reference points for data interpretation and the direction of future research.

A Survey of Methods for Gas-Lift Optimization

Directory of Open Access Journals (Sweden)

Kashif Rashid

2012-01-01

Full Text Available This paper presents a survey of methods and techniques developed for the solution of the continuous gas-lift optimization problem over the last two decades. These range from isolated single-well analysis all the way to real-time multivariate optimization schemes encompassing all wells in a field. While some methods are clearly limited due to their neglect of treating the effects of inter-dependent wells with common flow lines, other methods are limited due to the efficacy and quality of the solution obtained when dealing with large-scale networks comprising hundreds of difficult to produce wells. The aim of this paper is to provide an insight into the approaches developed and to highlight the challenges that remain.

Learning lessons from field surveys in humanitarian contexts: a case study of field surveys conducted in North Kivu, DRC 2006-2008

Directory of Open Access Journals (Sweden)

Grellety Emmanuel

2009-09-01

Full Text Available Abstract Survey estimates of mortality and malnutrition are commonly used to guide humanitarian decision-making. Currently, different methods of conducting field surveys are the subject of debate among epidemiologists. Beyond the technical arguments, decision makers may find it difficult to conceptualize what the estimates actually mean. For instance, what makes this particular situation an emergency? And how should the operational response be adapted accordingly. This brings into question not only the quality of the survey methodology, but also the difficulties epidemiologists face in interpreting results and selecting the most important information to guide operations. As a case study, we reviewed mortality and nutritional surveys conducted in North Kivu, Democratic Republic of Congo (DRC published from January 2006 to January 2009. We performed a PubMed/Medline search for published articles and scanned publicly available humanitarian databases and clearinghouses for grey literature. To evaluate the surveys, we developed minimum reporting criteria based on available guidelines and selected peer-review articles. We identified 38 reports through our search strategy; three surveys met our inclusion criteria. The surveys varied in methodological quality. Reporting against minimum criteria was generally good, but presentation of ethical procedures, raw data and survey limitations were missed in all surveys. All surveys also failed to consider contextual factors important for data interpretation. From this review, we conclude that mechanisms to ensure sound survey design and conduct must be implemented by operational organisations to improve data quality and reporting. Training in data interpretation would also be useful. Novel survey methods should be trialled and prospective data gathering (surveillance employed wherever feasible.

An automated radiological survey method for performing site remediation and decommissioning

International Nuclear Information System (INIS)

Handy, R.G.; Bolch, W.E.; Harder, G.F.; Tolaymat, T.M.

1994-01-01

A portable, computer-based method of performing environmental monitoring and assessment for site remediation and decommissioning has been developed. The integrated system has been developed to provide for survey time reductions and real-time data analysis. The technique utilizes a notebook 486 computer with the necessary hardware and software components that makes it possible to be used in an almost unlimited number of environmental monitoring and assessment scenarios. The results from a pilot, open-quotes hide-and-seekclose quotes gamma survey and an actual alpha decontamination survey were elucidated. It was found that a open-quotes hide-and-seekclose quotes survey could come up with timely and accurate conclusions about the position of the source. The use of the automated system in a Th-232 alpha survey resulted in a reduction in the standard time necessary to do a radiological survey. In addition, the ability to analyze the data on-site allowed for identification and location of areas which needed further decontamination. Finally, a discussion on possible future improvements and field conclusions was made

Comparison of Survey Data Collection Methods

Directory of Open Access Journals (Sweden)

VIDAL DÍAZ DE RADA

2017-01-01

Full Text Available This paper presents the results of a mixed-mode survey of the general population using a combination of postal, telephone, and Internet survey protocols. Potential respondents were invited to participate by ordinary mail and were allowed to choose their preferred response mode. The paper focuses on response quality (taking non-responses into consideration, fieldwork time and data collection cost. The results reveal that the Internet survey produces the lowest rate of non-responses and requires significantly less fieldwork time, although it is slightly more costly than the postal survey. However, when differences in cost structure are taken into account, we find that the same number of completed questionnaires could have been obtained through the Internet alone at a cost that is 18.2% lower than the mixed-mode survey.

Google Street View as an alternative method to car surveys in large-scale vegetation assessments.

Science.gov (United States)

Deus, Ernesto; Silva, Joaquim S; Catry, Filipe X; Rocha, Miguel; Moreira, Francisco

2015-10-01

Car surveys (CS) are a common method for assessing the distribution of alien invasive plants. Google Street View (GSV), a free-access web technology where users may experience a virtual travel along roads, has been suggested as a cost-effective alternative to car surveys. We tested if we could replicate the results from a countrywide survey conducted by car in Portugal using GSV as a remote sensing tool, aiming at assessing the distribution of Eucalyptus globulus Labill. wildlings on roadsides adjacent to eucalypt stands. Georeferenced points gathered along CS were used to create road transects visible as lines overlapping the road in GSV environment, allowing surveying the same sampling areas using both methods. This paper presents the results of the comparison between the two methods. Both methods produced similar models of plant abundance, selecting the same explanatory variables, in the same hierarchical order of importance and depicting a similar influence on plant abundance. Even though the GSV model had a lower performance and the GSV survey detected fewer plants, additional variables collected exclusively with GSV improved model performance and provided a new insight into additional factors influencing plant abundance. The survey using GSV required ca. 9 % of the funds and 62 % of the time needed to accomplish the CS. We conclude that GSV may be a cost-effective alternative to CS. We discuss some advantages and limitations of GSV as a survey method. We forecast that GSV may become a widespread tool in road ecology, particularly in large-scale vegetation assessments.

The Tianjin Mental Health Survey (TJMHS) : study rationale, design and methods

NARCIS (Netherlands)

Yin, Huifang; Phillips, Michael R; Wardenaar, Klaas J; Xu, Guangming; Ormel, Johan; Tian, Hongjun; Schoevers, Robert A

Mental health in China is of growing concern to both policy-makers and researchers. The Tianjin Mental Health Survey (TJMHS) was conducted between July 2011 and March 2012 to assess the prevalence and risk factors of mental disorders in the context of recent economic growth and other

GPR survey, as one of the best geophysical methods for social and industrial needs

Science.gov (United States)

Chernov, Anatolii

2016-04-01

This paper is about ways and methods of applying non-invasive geophysical method - Ground penetrating radar (GPR) survey in different spheres of science, industry, social life and culture. Author would like to show that geological methods could be widely used for solving great variety of industrial, human safety and other problems. In that article, we take GPR survey as an example of such useful geophysical methods. It is a fact that investigation of near surface underground medium is important process, which influence on development of different spheres of science and social life: investigation of near surface geology (layering, spreading of rock types, identification of voids, etc.), hydrogeology (depth to water horizons, their thickness), preparation step for construction of roads and buildings (civil geology, engineering geology), investigation of cultural heritage (burial places, building remains,...), ecological investigations (land slides, variation in underground water level, etc.), glaciology. These tasks can be solved by geological methods, but as usual, geophysical survey takes a lot of time and energy (especially electric current and resistivity methods, seismic survey). Author claims that GPR survey can be performed faster than other geophysical surveys and results of GPR survey are informative enough to make proper conclusions. Some problems even cannot be solved without GPR. For example, identification of burial place (one of author's research objects): results of magnetic and electric resistivity tomography survey do not contain enough information to identify burial place, but according to anomalies on GPR survey radarograms, presence of burial place can be proven. Identification of voids and non-magnetic objects also hardly can be done by another non-invasive geophysics surveys and GPR is applicable for that purpose. GPR can be applied for monitoring of dangerous processes in geological medium under roads, buildings, parks and other places of human

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study

Science.gov (United States)

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-01-01

Background Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study – often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Methods Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. Results 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods – particularly surveys and individual interviews – but used methods in a wide range of roles. Conclusion Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single

A Delphi Method Analysis to Create an Emergency Medicine Educational Patient Satisfaction Survey

Directory of Open Access Journals (Sweden)

Kory S. London

2015-12-01

Full Text Available Introduction: Feedback on patient satisfaction (PS as a means to monitor and improve performance in patient communication is lacking in residency training. A physician’s promotion, compensation and job satisfaction may be impacted by his individual PS scores, once he is in practice. Many communication and satisfaction surveys exist but none focus on the emergency department setting for educational purposes. The goal of this project was to create an emergency medicine-based educational PS survey with strong evidence for content validity. Methods: We used the Delphi Method (DM to obtain expert opinion via an iterative process of surveying. Questions were mined from four PS surveys as well as from group suggestion. The DM analysis determined the structure, content and appropriate use of the tool. The group used four-point Likert-type scales and Lynn’s criteria for content validity to determine relevant questions from the stated goals. Results: Twelve recruited experts participated in a series of seven surveys to achieve consensus. A 10-question, single-page survey with an additional page of qualitative questions and demographic questions was selected. Thirty one questions were judged to be relevant from an original 48-question list. Of these, the final 10 questions were chosen. Response rates for individual survey items was 99.5%. Conclusion: The DM produced a consensus survey with content validity evidence. Future work will be needed to obtain evidence for response process, internal structure and construct validity.

The use of qualitative methods to inform Delphi surveys in core outcome set development.

Science.gov (United States)

Keeley, T; Williamson, P; Callery, P; Jones, L L; Mathers, J; Jones, J; Young, B; Calvert, M

2016-05-04

Core outcome sets (COS) help to minimise bias in trials and facilitate evidence synthesis. Delphi surveys are increasingly being used as part of a wider process to reach consensus about what outcomes should be included in a COS. Qualitative research can be used to inform the development of Delphi surveys. This is an advance in the field of COS development and one which is potentially valuable; however, little guidance exists for COS developers on how best to use qualitative methods and what the challenges are. This paper aims to provide early guidance on the potential role and contribution of qualitative research in this area. We hope the ideas we present will be challenged, critiqued and built upon by others exploring the role of qualitative research in COS development. This paper draws upon the experiences of using qualitative methods in the pre-Delphi stage of the development of three different COS. Using these studies as examples, we identify some of the ways that qualitative research might contribute to COS development, the challenges in using such methods and areas where future research is required. Qualitative research can help to identify what outcomes are important to stakeholders; facilitate understanding of why some outcomes may be more important than others, determine the scope of outcomes; identify appropriate language for use in the Delphi survey and inform comparisons between stakeholder data and other sources, such as systematic reviews. Developers need to consider a number of methodological points when using qualitative research: specifically, which stakeholders to involve, how to sample participants, which data collection methods are most appropriate, how to consider outcomes with stakeholders and how to analyse these data. A number of areas for future research are identified. Qualitative research has the potential to increase the research community's confidence in COS, although this will be dependent upon using rigorous and appropriate

Computerized tablet based versus traditional paper- based survey methods: results from adolescent's health research in schools of Maharashtra, India

OpenAIRE

Naveen Agarwal; Balram Paswan; Prakash H. Fulpagare; Dhirendra N Sinha; Thaksaphon Thamarangsi; Manju Rani

2018-01-01

Background and challenges to implementation Technological advancement is growing very fast in India and majority of young population is handling electronic devices often during leisure as well as at work. This study indicates that electronic tablets are less time consuming and improves survey response rate over the traditional paper-pencil survey method. Intervention or response An Android-based Global School-based Health Survey (GSHS) questionnaire was used with the...

[Study of spatial stratified sampling strategy of Oncomelania hupensis snail survey based on plant abundance].

Science.gov (United States)

Xun-Ping, W; An, Z

2017-07-27

Objective To optimize and simplify the survey method of Oncomelania hupensis snails in marshland endemic regions of schistosomiasis, so as to improve the precision, efficiency and economy of the snail survey. Methods A snail sampling strategy (Spatial Sampling Scenario of Oncomelania based on Plant Abundance, SOPA) which took the plant abundance as auxiliary variable was explored and an experimental study in a 50 m×50 m plot in a marshland in the Poyang Lake region was performed. Firstly, the push broom surveyed data was stratified into 5 layers by the plant abundance data; then, the required numbers of optimal sampling points of each layer through Hammond McCullagh equation were calculated; thirdly, every sample point in the line with the Multiple Directional Interpolation (MDI) placement scheme was pinpointed; and finally, the comparison study among the outcomes of the spatial random sampling strategy, the traditional systematic sampling method, the spatial stratified sampling method, Sandwich spatial sampling and inference and SOPA was performed. Results The method (SOPA) proposed in this study had the minimal absolute error of 0.213 8; and the traditional systematic sampling method had the largest estimate, and the absolute error was 0.924 4. Conclusion The snail sampling strategy (SOPA) proposed in this study obtains the higher estimation accuracy than the other four methods.

U.S. residential consumer product information: Validation of methods for post-stratification weighting of Amazon Mechanical Turk surveys

Energy Technology Data Exchange (ETDEWEB)

Greenblatt, Jeffery B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yang, Hung-Chia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Young, Scott J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Beraki, Bereket [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pratt, Stacy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Willem, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Donovan, Sally M. [Consultant, Melbourne (Australia)

2013-04-01

other variables, while statistically significant in some cases, were nonetheless considered to be minor. Depending on the intended purpose of the data collected using AMT, these biases may or may not be important; to correct them, additional questions and/or further post-survey adjustments could be employed. In general, based on the analysis methods and the sample datasets used in this study, AMT surveys appeared to provide useful data on appliance and consumer electronics devices.

Comparing Coral Reef Survey Methods. Unesco Reports in Marine Science No. 21 Report of a Regional Unesco/UNEP Workshop on Coral Reef Survey Management and Assessment Methods in Asia and the Pacific (Phuket, Thailand, December 13-17, 1982).

Science.gov (United States)

United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Marine Sciences.

This report includes nine papers prepared for a workshop on coral reef survey management and assessment methods in Asia and the Pacific. The papers are: "A Contrast in Methodologies between Surveying and Testing" (Charles Birkeland); "Coral Reef Survey Methods in the Andaman Sea" (Hansa Chansang); "A Review of Coral Reef…

The JCMT Transient Survey: Data Reduction and Calibration Methods

International Nuclear Information System (INIS)

Mairs, Steve; Lane, James; Johnstone, Doug; Kirk, Helen; Lacaille, Kevin; Chapman, Scott; Bower, Geoffrey C.; Bell, Graham S.; Graves, Sarah

2017-01-01

Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to episodic outbursts. Observing these brightness variations at infrared or submillimeter wavelengths constrains the current accretion models. The JCMT Transient Survey is a three-year project dedicated to studying the continuum variability of deeply embedded protostars in eight nearby star-forming regions at a one-month cadence. We use the SCUBA-2 instrument to simultaneously observe these regions at wavelengths of 450 and 850 μ m. In this paper, we present the data reduction techniques, image alignment procedures, and relative flux calibration methods for 850 μ m data. We compare the properties and locations of bright, compact emission sources fitted with Gaussians over time. Doing so, we achieve a spatial alignment of better than 1″ between the repeated observations and an uncertainty of 2%–3% in the relative peak brightness of significant, localized emission. This combination of imaging performance is unprecedented in ground-based, single-dish submillimeter observations. Finally, we identify a few sources that show possible and confirmed brightness variations. These sources will be closely monitored and presented in further detail in additional studies throughout the duration of the survey.

The JCMT Transient Survey: Data Reduction and Calibration Methods

Energy Technology Data Exchange (ETDEWEB)

Mairs, Steve; Lane, James [Department of Physics and Astronomy, University of Victoria, Victoria, BC, V8P 1A1 (Canada); Johnstone, Doug; Kirk, Helen [NRC Herzberg Astronomy and Astrophysics, 5071 West Saanich Road, Victoria, BC, V9E 2E7 (Canada); Lacaille, Kevin; Chapman, Scott [Department of Physics and Atmospheric Science, Dalhousie University, Halifax, NS, B3H 4R2 (Canada); Bower, Geoffrey C. [Academia Sinica Institute of Astronomy and Astrophysics, 645 N. A‘ohōkū Place, Hilo, HI 96720 (United States); Bell, Graham S.; Graves, Sarah, E-mail: smairs@uvic.ca [East Asian Observatory, 660 North A‘ohōkū Place, University Park, Hilo, Hawaii 96720 (United States); Collaboration: JCMT Transient Team

2017-07-01

Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to episodic outbursts. Observing these brightness variations at infrared or submillimeter wavelengths constrains the current accretion models. The JCMT Transient Survey is a three-year project dedicated to studying the continuum variability of deeply embedded protostars in eight nearby star-forming regions at a one-month cadence. We use the SCUBA-2 instrument to simultaneously observe these regions at wavelengths of 450 and 850 μ m. In this paper, we present the data reduction techniques, image alignment procedures, and relative flux calibration methods for 850 μ m data. We compare the properties and locations of bright, compact emission sources fitted with Gaussians over time. Doing so, we achieve a spatial alignment of better than 1″ between the repeated observations and an uncertainty of 2%–3% in the relative peak brightness of significant, localized emission. This combination of imaging performance is unprecedented in ground-based, single-dish submillimeter observations. Finally, we identify a few sources that show possible and confirmed brightness variations. These sources will be closely monitored and presented in further detail in additional studies throughout the duration of the survey.

The former Semipalatinsk Test Site survey by field γ-spectrometry method

International Nuclear Information System (INIS)

Pakhomov, S.A.; Dubasov, Yu.V.; Biryukov, E.I.; Gavrilin, S.S.; Ilyin, L.I.

2001-01-01

Full text: Field γ-spectrometry method is the most productive method of getting an information on gamma-irradiating radionuclides contents in objects under survey. For many years the Radium Institute was the most active participant of works on radiation survey of the Semipalatinsk Test Site, field γ-spectrometry method including. In field γ-spectrometry method realization the existence of corresponding apparatus, and methodic software is supposed to be allowing to carry out both measurement, recording of γ-spectrometry energetic characteristics in field conditions and final treatment (using corresponding physical models) ensuring obtaining the information on radionuclides' contents. Different variants of such apparatus were developed and made at the Radium Institute. Under conditions of complex spectral structure and high intensity existence a portable variant of Ge(Li)-detector spectrometer fed by alkaline accumulators and allowing to record a spectrum at high load was elaborated. For walk γ-survey in common with the University two variants of portable spectrometers 'Skif-3' were elaborated: one of them with a standard scintillation detector on the base of Nal(Ti) crystal, having the size of 63x63 mm, and the other is an 'X-ray' detector of large dimension on the base of CsI crystal with a diameter of 165 mm, designated for soft gamma-irradiation registration, 241 Am including. During 8 hours of independent works 'Skif-3' is able to record into internal memory up to 100 spectra with an exposure up to 9999 s. At 10 min exposure in its sensitivity of 241 Am finding (10 Bq/kg) a spectrometer 'Skif-3' excels a portable spectrometer 'InSpector' (Canberra) working with the exposure of 1 hour. For automobile measurements a car spectrometer was elaborated fed. from car board supply and having four detectors based on NaI crystals with the dimensions 200x110 mm and total volume of about 121. For express treatment of a 'Skif-3' spectrometer scintillation spectra special

[Essential procedure and key methods for survey of traditional knowledge related to Chinese materia medica resources].

Science.gov (United States)

Cheng, Gong; Huang, Lu-qi; Xue, Da-yuan; Zhang, Xiao-bo

2014-12-01

The survey of traditional knowledge related to Chinese materia medica resources is the important component and one of the innovative aspects of the fourth national survey of the Chinese materia medica resources. China has rich traditional knowledge of traditional Chinese medicine (TCM) and the comprehensive investigation of TCM traditional knowledge aims to promote conservation and sustainable use of Chinese materia medica resources. Building upon the field work of pilot investigations, this paper introduces the essential procedures and key methods for conducting the survey of traditional knowledge related to Chinese materia medica resources. The essential procedures are as follows. First is the preparation phrase. It is important to review all relevant literature and provide training to the survey teams so that they have clear understanding of the concept of traditional knowledge and master key survey methods. Second is the field investigation phrase. When conducting field investigations, survey teams should identify the traditional knowledge holders by using the 'snowball method', record the traditional knowledge after obtaining prior informed concerned from the traditional knowledge holders. Researchers should fill out the survey forms provided by the Technical Specification of the Fourth National Survey of Chinese Materia Medica Resources. Researchers should pay particular attention to the scope of traditional knowledge and the method of inheriting the knowledge, which are the key information for traditional knowledge holders and potential users to reach mutual agreed terms to achieve benefit sharing. Third is the data compilation and analysis phrase. Researchers should try to compile and edit the TCM traditional knowledge in accordance with intellectual property rights requirements so that the information collected through the national survey can serve as the basic data for the TCM traditional knowledge database. The key methods of the survey include regional

Mobile phones are a viable option for surveying young Australian women: a comparison of two telephone survey methods

Directory of Open Access Journals (Sweden)

Liu Bette

2011-11-01

Full Text Available Abstract Background Households with fixed-line telephones have decreased while mobile (cell phone ownership has increased. We therefore sought to examine the feasibility of recruiting young women for a national health survey through random digit dialling mobile phones. Methods Two samples of women aged 18 to 39 years were surveyed by random digit dialling fixed and mobile numbers. We compared participation rates and responses to a questionnaire between women surveyed by each contact method. Results After dialling 5,390 fixed-lines and 3,697 mobile numbers, 140 and 128 women were recruited respectively. Among women contacted and found to be eligible, participation rates were 74% for fixed-lines and 88% for mobiles. Taking into account calls to numbers where eligibility was unknown (e.g. unanswered calls the estimated response rates were 54% and 45% respectively. Of women contacted by fixed-line, 97% reported having a mobile while 61% of those contacted by mobile reported having a fixed-line at home. After adjusting for age, there were no significant differences between mobile-only and fixed-line responders with respect to education, residence, and various health behaviours; however compared to those with fixed-lines, mobile-only women were more likely to identify as Indigenous (OR 4.99, 95%CI 1.52-16.34 and less likely to live at home with their parents (OR 0.09, 95%CI 0.03-0.29. Conclusions Random digit dialling mobile phones to conduct a health survey in young Australian women is feasible, gives a comparable response rate and a more representative sample than dialling fixed-lines only. Telephone surveys of young women should include mobile dialling.

Natural science methods in field archaeology, with the case study of Crimea

Science.gov (United States)

Smekalova, T. N.; Yatsishina, E. B.; Garipov, A. S.; Pasumanskii, A. E.; Ketsko, R. S.; Chudin, A. V.

2016-07-01

The natural science methods applied in archaeological field survey are briefly reviewed. They are classified into several groups: remote sensing (analysis of space and airspace photographs, viewshed analysis, study of detailed topographic and special maps, and three-dimensional photogrammetry), geophysical survey, and analysis of cultural layer elements (by geochemical, paleosol, and other methods). The most important principle is the integration of complementary nondestructive and fast natural science methods in order to obtain the most complete and reliable results. Emphasis is placed on the consideration of geophysical methods of the study, primarily, magnetic exploration. A multidisciplinary study of the monuments of ancient Chersonesos and its "barbarian" environment is described as an example of successful application of a complex technique.

Understanding Patient Experience Using Internet-based Email Surveys: A Feasibility Study at Mount Sinai Hospital.

Science.gov (United States)

Morgan, Matthew; Lau, Davina; Jivraj, Tanaz; Principi, Tania; Dietrich, Sandra; Bell, Chaim M

2015-01-01

Email is becoming a widely accepted communication tool in healthcare settings. This study sought to test the feasibility of Internet-based email surveys of patient experience in the ambulatory setting. We conducted a study of email Internet-based surveys sent to patients in selected ambulatory clinics at Mount Sinai Hospital in Toronto, Canada. Our findings suggest that email links to Internet surveys are a feasible, timely and efficient method to solicit patient feedback about their experience. Further research is required to optimally leverage Internet-based email surveys as a tool to better understand the patient experience.

Laser Scanning in Engineering Surveying: Methods of Measurement and Modeling of Structures

Directory of Open Access Journals (Sweden)

Lenda Grzegorz

2016-06-01

Full Text Available The study is devoted to the uses of laser scanning in the field of engineering surveying. It is currently one of the main trends of research which is developed at the Department of Engineering Surveying and Civil Engineering at the Faculty of Mining Surveying and Environmental Engineering of AGH University of Science and Technology in Krakow. They mainly relate to the issues associated with tower and shell structures, infrastructure of rail routes, or development of digital elevation models for a wide range of applications. These issues often require the use of a variety of scanning techniques (stationary, mobile, but the differences also regard the planning of measurement stations and methods of merging point clouds. Significant differences appear during the analysis of point clouds, especially when modeling objects. Analysis of the selected parameters is already possible basing on ad hoc measurements carried out on a point cloud. However, only the construction of three-dimensional models provides complete information about the shape of structures, allows to perform the analysis in any place and reduces the amount of the stored data. Some structures can be modeled in the form of simple axes, sections, or solids, for others it becomes necessary to create sophisticated models of surfaces, depicting local deformations. The examples selected for the study allow to assess the scope of measurement and office work for a variety of uses related to the issue set forth in the title of this study. Additionally, the latest, forward-looking technology was presented - laser scanning performed from Unmanned Aerial Vehicles (drones. Currently, it is basically in the prototype phase, but it might be expected to make a significant progress in numerous applications in the field of engineering surveying.

Use of methods for specifying the target difference in randomised controlled trial sample size calculations: Two surveys of trialists' practice.

Science.gov (United States)

Cook, Jonathan A; Hislop, Jennifer M; Altman, Doug G; Briggs, Andrew H; Fayers, Peter M; Norrie, John D; Ramsay, Craig R; Harvey, Ian M; Vale, Luke D

2014-06-01

Central to the design of a randomised controlled trial (RCT) is a calculation of the number of participants needed. This is typically achieved by specifying a target difference, which enables the trial to identify a difference of a particular magnitude should one exist. Seven methods have been proposed for formally determining what the target difference should be. However, in practice, it may be driven by convenience or some other informal basis. It is unclear how aware the trialist community is of these formal methods or whether they are used. To determine current practice regarding the specification of the target difference by surveying trialists. Two surveys were conducted: (1) Members of the Society for Clinical Trials (SCT): participants were invited to complete an online survey through the society's email distribution list. Respondents were asked about their awareness, use of, and willingness to recommend methods; (2) Leading UK- and Ireland-based trialists: the survey was sent to UK Clinical Research Collaboration registered Clinical Trials Units, Medical Research Council UK Hubs for Trial Methodology Research, and the Research Design Services of the National Institute for Health Research. This survey also included questions about the most recent trial developed by the respondent's group. Survey 1: Of the 1182 members on the SCT membership email distribution list, 180 responses were received (15%). Awareness of methods ranged from 69 (38%) for health economic methods to 162 (90%) for pilot study. Willingness to recommend among those who had used a particular method ranged from 56% for the opinion-seeking method to 89% for the review of evidence-base method. Survey 2: Of the 61 surveys sent out, 34 (56%) responses were received. Awareness of methods ranged from 33 (97%) for the review of evidence-base and pilot methods to 14 (41%) for the distribution method. The highest level of willingness to recommend among users was for the anchor method (87%). Based upon

Survey: interpolation methods for whole slide image processing.

Science.gov (United States)

Roszkowiak, L; Korzynska, A; Zak, J; Pijanowska, D; Swiderska-Chadaj, Z; Markiewicz, T

2017-02-01

Evaluating whole slide images of histological and cytological samples is used in pathology for diagnostics, grading and prognosis . It is often necessary to rescale whole slide images of a very large size. Image resizing is one of the most common applications of interpolation. We collect the advantages and drawbacks of nine interpolation methods, and as a result of our analysis, we try to select one interpolation method as the preferred solution. To compare the performance of interpolation methods, test images were scaled and then rescaled to the original size using the same algorithm. The modified image was compared to the original image in various aspects. The time needed for calculations and results of quantification performance on modified images were also compared. For evaluation purposes, we used four general test images and 12 specialized biological immunohistochemically stained tissue sample images. The purpose of this survey is to determine which method of interpolation is the best to resize whole slide images, so they can be further processed using quantification methods. As a result, the interpolation method has to be selected depending on the task involving whole slide images. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

A Survey on Chinese Scholars' Adoption of Mixed Methods

Science.gov (United States)

Zhou, Yuchun

2018-01-01

Since the 1980s when mixed methods emerged as "the third research methodology", it was widely adopted in Western countries. However, inadequate literature revealed how this methodology was accepted by scholars in Asian countries, such as China. Therefore, this paper used a quantitative survey to investigate Chinese scholars' perceptions…

Conducting Surveys and Data Collection: From Traditional to Mobile and SMS-based Surveys

Directory of Open Access Journals (Sweden)

Iftikhar Alam

2014-08-01

Full Text Available Fresh, bias-free and valid data collected using different survey modes is considered an essential requirement for smooth functioning and evolution of an organization. Surveys play a major role in making in-time correct decisions and generating reports. The aim of this study is to compare and investigate state-of-the-art in different survey modes including print, email, online, mobile and SMS-based surveys. Results indicated that existing methods are neither complete nor sufficient to fulfil the overall requirements of an organization which primarily rely on surveys. Also, it shows that SMS is a dominant method for data collection due to its pervasiveness. However, existing SMS-based data collection has limitations like limited number of characters per SMS, single question per SMS and lake of multimedia support. Recent trends in data collection emphasis on data collection applications for smart phones. However, in developing countries low-end mobile devices are still extensively used which makes the data collection difficult from man in the street. The paper conclude that existing survey modes and methods should be improved to get maximum responses quickly in low cost manner. The study has contributed to the area of surveying and data collection by analysing different factors such as cost, time and response rate. The results of this study can help practitioners in creating a more successful surveying method for data collection that can be effectively used for low budget projects in developed as well as developing countries.

A field study of selected U.S. Geological Survey analytical methods for measuring pesticides in filtered stream water, June - September 2012

Science.gov (United States)

Martin, Jeffrey D.; Norman, Julia E.; Sandstrom, Mark W.; Rose, Claire E.

2017-09-06

U.S. Geological Survey monitoring programs extensively used two analytical methods, gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry, to measure pesticides in filtered water samples during 1992–2012. In October 2012, the monitoring programs began using direct aqueous-injection liquid chromatography tandem mass spectrometry as a new analytical method for pesticides. The change in analytical methods, however, has the potential to inadvertently introduce bias in analysis of datasets that span the change.A field study was designed to document performance of the new method in a variety of stream-water matrices and to quantify any potential changes in measurement bias or variability that could be attributed to changes in analytical methods. The goals of the field study were to (1) summarize performance (bias and variability of pesticide recovery) of the new method in a variety of stream-water matrices; (2) compare performance of the new method in laboratory blank water (laboratory reagent spikes) to that in a variety of stream-water matrices; (3) compare performance (analytical recovery) of the new method to that of the old methods in a variety of stream-water matrices; (4) compare pesticide detections and concentrations measured by the new method to those of the old methods in a variety of stream-water matrices; (5) compare contamination measured by field blank water samples in old and new methods; (6) summarize the variability of pesticide detections and concentrations measured by the new method in field duplicate water samples; and (7) identify matrix characteristics of environmental water samples that adversely influence the performance of the new method. Stream-water samples and a variety of field quality-control samples were collected at 48 sites in the U.S. Geological Survey monitoring networks during June–September 2012. Stream sites were located across the United States and included sites in agricultural and urban land

International survey on attitudes toward ethics in health technology assessment: An exploratory study

NARCIS (Netherlands)

Arellano, L.E.; Willett, J.M.; Borry, P.

2011-01-01

Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was

Methods of removing uranium from drinking water. 1. A literature survey. 2. Present municipal water treatment and potential removal methods

International Nuclear Information System (INIS)

Drury, J.S.; Michelson, D.; Ensminger, J.T.; Lee, S.Y.; White, S.K.

1982-12-01

Literature was searched for methods of removing uranium from drinking water. U.S. manufacturers and users of water-treatment equipment and products were also contacted regarding methods of removing uranium from potable water. Based on the results of these surveys, it was recommended that untreated, partially treated, and finished water samples from municipal water-treatment facilities be analyzed to determine the extent of removal of uranium by presently used procedures, and that additional laboratory studies be performed to determine what changes are needed to maximize the effectiveness of treatments that are already in use in existing water-treatment plants

Comparing two survey methods of measuring health-related indicators: Lot Quality Assurance Sampling and Demographic Health Surveys.

Science.gov (United States)

Anoke, Sarah C; Mwai, Paul; Jeffery, Caroline; Valadez, Joseph J; Pagano, Marcello

2015-12-01

Two common methods used to measure indicators for health programme monitoring and evaluation are the demographic and health surveys (DHS) and lot quality assurance sampling (LQAS); each one has different strengths. We report on both methods when utilised in comparable situations. We compared 24 indicators in south-west Uganda, where data for prevalence estimations were collected independently for the two methods in 2011 (LQAS: n = 8876; DHS: n = 1200). Data were stratified (e.g. gender and age) resulting in 37 comparisons. We used a two-sample two-sided Z-test of proportions to compare both methods. The average difference between LQAS and DHS for 37 estimates was 0.062 (SD = 0.093; median = 0.039). The average difference among the 21 failures to reject equality of proportions was 0.010 (SD = 0.041; median = 0.009); among the 16 rejections, it was 0.130 (SD = 0.010, median = 0.118). Seven of the 16 rejections exhibited absolute differences of 0.10 and 0.20 (mean = 0.261, SD = 0.083). There is 75.7% agreement across the two surveys. Both methods yield regional results, but only LQAS provides information at less granular levels (e.g. the district level) where managerial action is taken. The cost advantage and localisation make LQAS feasible to conduct more frequently, and provides the possibility for real-time health outcomes monitoring. © 2015 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

Studying dark energy with galaxy cluster surveys

International Nuclear Information System (INIS)

Mohr, Joseph J.; O'Shea, Brian; Evrard, August E.; Bialek, John; Haiman, Zoltan

2003-01-01

Galaxy cluster surveys provide a powerful means of studying the density and nature of the dark energy. The redshift distribution of detected clusters in a deep, large solid angle SZE or X-ray survey is highly sensitive to the dark energy equation of state. Accurate constraints at the 5% level on the dark energy equation of state require that systematic biases in the mass estimators must be controlled at better than the ∼10% level. Observed regularity in the cluster population and the availability of multiple, independent mass estimators suggests these precise measurements are possible. Using hydrodynamical simulations that include preheating, we show that the level of preheating required to explain local galaxy cluster structure has a dramatic effect on X-ray cluster surveys, but only a mild effect on SZE surveys. This suggests that SZE surveys may be optimal for cosmology while X-ray surveys are well suited for studies of the thermal history of the intracluster medium

The cosmological analysis of X-ray cluster surveys - I. A new method for interpreting number counts

Science.gov (United States)

Clerc, N.; Pierre, M.; Pacaud, F.; Sadibekova, T.

2012-07-01

We present a new method aimed at simplifying the cosmological analysis of X-ray cluster surveys. It is based on purely instrumental observable quantities considered in a two-dimensional X-ray colour-magnitude diagram (hardness ratio versus count rate). The basic principle is that even in rather shallow surveys, substantial information on cluster redshift and temperature is present in the raw X-ray data and can be statistically extracted; in parallel, such diagrams can be readily predicted from an ab initio cosmological modelling. We illustrate the methodology for the case of a 100-deg2XMM survey having a sensitivity of ˜10-14 erg s-1 cm-2 and fit at the same time, the survey selection function, the cluster evolutionary scaling relations and the cosmology; our sole assumption - driven by the limited size of the sample considered in the case study - is that the local cluster scaling relations are known. We devote special attention to the realistic modelling of the count-rate measurement uncertainties and evaluate the potential of the method via a Fisher analysis. In the absence of individual cluster redshifts, the count rate and hardness ratio (CR-HR) method appears to be much more efficient than the traditional approach based on cluster counts (i.e. dn/dz, requiring redshifts). In the case where redshifts are available, our method performs similar to the traditional mass function (dn/dM/dz) for the purely cosmological parameters, but constrains better parameters defining the cluster scaling relations and their evolution. A further practical advantage of the CR-HR method is its simplicity: this fully top-down approach totally bypasses the tedious steps consisting in deriving cluster masses from X-ray temperature measurements.

Reviving common standards in point-count surveys for broad inference across studies

Science.gov (United States)

Matsuoka, Steven M.; Mahon, C. Lisa; Handel, Colleen M.; Solymos, Peter; Bayne, Erin M.; Fontaine, Patricia C.; Ralph, C.J.

2014-01-01

We revisit the common standards recommended by Ralph et al. (1993, 1995a) for conducting point-count surveys to assess the relative abundance of landbirds breeding in North America. The standards originated from discussions among ornithologists in 1991 and were developed so that point-count survey data could be broadly compared and jointly analyzed by national data centers with the goals of monitoring populations and managing habitat. Twenty years later, we revisit these standards because (1) they have not been universally followed and (2) new methods allow estimation of absolute abundance from point counts, but these methods generally require data beyond the original standards to account for imperfect detection. Lack of standardization and the complications it introduces for analysis become apparent from aggregated data. For example, only 3% of 196,000 point counts conducted during the period 1992-2011 across Alaska and Canada followed the standards recommended for the count period and count radius. Ten-minute, unlimited-count-radius surveys increased the number of birds detected by >300% over 3-minute, 50-m-radius surveys. This effect size, which could be eliminated by standardized sampling, was ≥10 times the published effect sizes of observers, time of day, and date of the surveys. We suggest that the recommendations by Ralph et al. (1995a) continue to form the common standards when conducting point counts. This protocol is inexpensive and easy to follow but still allows the surveys to be adjusted for detection probabilities. Investigators might optionally collect additional information so that they can analyze their data with more flexible forms of removal and time-of-detection models, distance sampling, multiple-observer methods, repeated counts, or combinations of these methods. Maintaining the common standards as a base protocol, even as these study-specific modifications are added, will maximize the value of point-count data, allowing compilation and

Don't spin the pen: two alternative methods for second-stage sampling in urban cluster surveys

Directory of Open Access Journals (Sweden)

Rose Angela MC

2007-06-01

Full Text Available Abstract In two-stage cluster surveys, the traditional method used in second-stage sampling (in which the first household in a cluster is selected is time-consuming and may result in biased estimates of the indicator of interest. Firstly, a random direction from the center of the cluster is selected, usually by spinning a pen. The houses along that direction are then counted out to the boundary of the cluster, and one is then selected at random to be the first household surveyed. This process favors households towards the center of the cluster, but it could easily be improved. During a recent meningitis vaccination coverage survey in Maradi, Niger, we compared this method of first household selection to two alternatives in urban zones: 1 using a superimposed grid on the map of the cluster area and randomly selecting an intersection; and 2 drawing the perimeter of the cluster area using a Global Positioning System (GPS and randomly selecting one point within the perimeter. Although we only compared a limited number of clusters using each method, we found the sampling grid method to be the fastest and easiest for field survey teams, although it does require a map of the area. Selecting a random GPS point was also found to be a good method, once adequate training can be provided. Spinning the pen and counting households to the boundary was the most complicated and time-consuming. The two methods tested here represent simpler, quicker and potentially more robust alternatives to spinning the pen for cluster surveys in urban areas. However, in rural areas, these alternatives would favor initial household selection from lower density (or even potentially empty areas. Bearing in mind these limitations, as well as available resources and feasibility, investigators should choose the most appropriate method for their particular survey context.

Multidisciplinary eHealth Survey Evaluation Methods

Science.gov (United States)

Karras, Bryant T.; Tufano, James T.

2006-01-01

This paper describes the development process of an evaluation framework for describing and comparing web survey tools. We believe that this approach will help shape the design, development, deployment, and evaluation of population-based health interventions. A conceptual framework for describing and evaluating web survey systems will enable the…

THE BOLOCAM GALACTIC PLANE SURVEY. VIII. A MID-INFRARED KINEMATIC DISTANCE DISCRIMINATION METHOD

Energy Technology Data Exchange (ETDEWEB)

Ellsworth-Bowers, Timothy P.; Glenn, Jason; Battersby, Cara; Ginsburg, Adam; Bally, John [CASA, University of Colorado, UCB 389, University of Colorado, Boulder, CO 80309 (United States); Rosolowsky, Erik [Department of Physics and Astronomy, University of British Columbia Okanagan, 3333 University Way, Kelowna, BC V1V 1V7 (Canada); Mairs, Steven [Department of Physics and Astronomy, University of Victoria, 3800 Finnerty Road, Victoria, BC V8P 1A1 (Canada); Evans, Neal J. II [Department of Astronomy, University of Texas, 1 University Station C1400, Austin, TX 78712 (United States); Shirley, Yancy L., E-mail: timothy.ellsworthbowers@colorado.edu [Steward Observatory, University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States)

2013-06-10

We present a new distance estimation method for dust-continuum-identified molecular cloud clumps. Recent (sub-)millimeter Galactic plane surveys have cataloged tens of thousands of these objects, plausible precursors to stellar clusters, but detailed study of their physical properties requires robust distance determinations. We derive Bayesian distance probability density functions (DPDFs) for 770 objects from the Bolocam Galactic Plane Survey in the Galactic longitude range 7. Degree-Sign 5 {<=} l {<=} 65 Degree-Sign . The DPDF formalism is based on kinematic distances, and uses any number of external data sets to place prior distance probabilities to resolve the kinematic distance ambiguity (KDA) for objects in the inner Galaxy. We present here priors related to the mid-infrared absorption of dust in dense molecular regions and the distribution of molecular gas in the Galactic disk. By assuming a numerical model of Galactic mid-infrared emission and simple radiative transfer, we match the morphology of (sub-)millimeter thermal dust emission with mid-infrared absorption to compute a prior DPDF for distance discrimination. Selecting objects first from (sub-)millimeter source catalogs avoids a bias towards the darkest infrared dark clouds (IRDCs) and extends the range of heliocentric distance probed by mid-infrared extinction and includes lower-contrast sources. We derive well-constrained KDA resolutions for 618 molecular cloud clumps, with approximately 15% placed at or beyond the tangent distance. Objects with mid-infrared contrast sufficient to be cataloged as IRDCs are generally placed at the near kinematic distance. Distance comparisons with Galactic Ring Survey KDA resolutions yield a 92% agreement. A face-on view of the Milky Way using resolved distances reveals sections of the Sagittarius and Scutum-Centaurus Arms. This KDA-resolution method for large catalogs of sources through the combination of (sub-)millimeter and mid-infrared observations of molecular

Multi-method Near-surface Geophysical Surveys for Site Response and Earthquake Damage Assessments at School Sites in Washington, USA

Science.gov (United States)

Cakir, R.; Walsh, T. J.; Norman, D. K.

2017-12-01

We, Washington Geological Survey (WGS), have been performing multi-method near surface geophysical surveys to help assess potential earthquake damage at public schools in Washington. We have been conducting active and passive seismic surveys, and estimating Shear-wave velocity (Vs) profiles, then determining the NEHRP soil classifications based on Vs30m values at school sites in Washington. The survey methods we have used: 1D and 2D MASW and MAM, P- and S-wave refraction, horizontal-to-vertical spectral ratio (H/V), and 2ST-SPAC to measure Vs and Vp at shallow (0-70m) and greater depths at the sites. We have also run Ground Penetrating Radar (GPR) surveys at the sites to check possible horizontal subsurface variations along and between the seismic survey lines and the actual locations of the school buildings. The seismic survey results were then used to calculate Vs30m for determining the NEHRP soil classifications at school sites, thus soil amplification effects on the ground motions. Resulting shear-wave velocity profiles generated from these studies can also be used for site response and liquefaction potential studies, as well as for improvement efforts of the national Vs30m database, essential information for ShakeMap and ground motion modeling efforts in Washington and Pacific Northwest. To estimate casualties, nonstructural, and structural losses caused by the potential earthquakes in the region, we used these seismic site characterization results associated with structural engineering evaluations based on ASCE41 or FEMA 154 (Rapid Visual Screening) as inputs in FEMA Hazus-Advanced Engineering Building Module (AEBM) analysis. Compelling example surveys will be presented for the school sites in western and eastern Washington.

U.S. Geological Survey experience with the residual absolutes method

Directory of Open Access Journals (Sweden)

E. W. Worthington

2017-10-01

Full Text Available The U.S. Geological Survey (USGS Geomagnetism Program has developed and tested the residual method of absolutes, with the assistance of the Danish Technical University's (DTU Geomagnetism Program. Three years of testing were performed at College Magnetic Observatory (CMO, Fairbanks, Alaska, to compare the residual method with the null method. Results show that the two methods compare very well with each other and both sets of baseline data were used to process the 2015 definitive data. The residual method will be implemented at the other USGS high-latitude geomagnetic observatories in the summer of 2017 and 2018.

Feasibility of dietary assessment methods, other tools and procedures for a pan-European food consumption survey among infants, toddlers and children

DEFF Research Database (Denmark)

Ocké, Marga; Brants, Henny; Dofkova, Marcela

2014-01-01

Purpose To test the feasibility of tools and procedures for a pan-European food consumption survey among children 0-10 years and to recommend one of two tested dietary assessment methods. Methods Two pilot studies including 378 children were conducted in Belgium and the Czech Republic in the Pilot...... more challenging by the interviewers. Conclusions Both dietary assessment methods with related tools and administration protocols were evaluated as feasible. The administration protocol with two 1-day food diaries with completion interviews offers more advantages for the future pan-European survey...

Marine gamma spectrometric survey

International Nuclear Information System (INIS)

Kostoglodov, V.V.

1979-01-01

Presented are theoretical problems physical and geochemical prerequisites and possibilities of practical application of the method of continuous submarine gamma-spectrometric survey and radiometric survey destined for rapid study of the surface layer of marine sediments. Shown is high efficiency and advantages of this method in comparison with traditional and widely spread in marine geology methods of bottom sediments investigation

Methods for rapidly processing angular masks of next-generation galaxy surveys

Science.gov (United States)

Swanson, M. E. C.; Tegmark, Max; Hamilton, Andrew J. S.; Hill, J. Colin

2008-07-01

As galaxy surveys become larger and more complex, keeping track of the completeness, magnitude limit and other survey parameters as a function of direction on the sky becomes an increasingly challenging computational task. For example, typical angular masks of the Sloan Digital Sky Survey contain about N = 300000 distinct spherical polygons. Managing masks with such large numbers of polygons becomes intractably slow, particularly for tasks that run in time with a naive algorithm, such as finding which polygons overlap each other. Here we present a `divide-and-conquer' solution to this challenge: we first split the angular mask into pre-defined regions called `pixels', such that each polygon is in only one pixel, and then perform further computations, such as checking for overlap, on the polygons within each pixel separately. This reduces tasks to , and also reduces the important task of determining in which polygon(s) a point on the sky lies from to , resulting in significant computational speedup. Additionally, we present a method to efficiently convert any angular mask to and from the popular HEALPIX format. This method can be generically applied to convert to and from any desired spherical pixelization. We have implemented these techniques in a new version of the MANGLE software package, which is freely available at http://space.mit.edu/home/tegmark/mangle/, along with complete documentation and example applications. These new methods should prove quite useful to the astronomical community, and since MANGLE is a generic tool for managing angular masks on a sphere, it has the potential to benefit terrestrial mapmaking applications as well.

A Survey of Symplectic and Collocation Integration Methods for Orbit Propagation

Science.gov (United States)

Jones, Brandon A.; Anderson, Rodney L.

2012-01-01

Demands on numerical integration algorithms for astrodynamics applications continue to increase. Common methods, like explicit Runge-Kutta, meet the orbit propagation needs of most scenarios, but more specialized scenarios require new techniques to meet both computational efficiency and accuracy needs. This paper provides an extensive survey on the application of symplectic and collocation methods to astrodynamics. Both of these methods benefit from relatively recent theoretical developments, which improve their applicability to artificial satellite orbit propagation. This paper also details their implementation, with several tests demonstrating their advantages and disadvantages.

Metal speciation: survey of environmental methods of analysis

Energy Technology Data Exchange (ETDEWEB)

Mach, M.H.; Nott, B.; Scott, J.W.; Maddalone, R.F.; Whiddon, N.T. [TRW, Redondo Beach, CA (United States). Chemistry Technology Dept.

1996-07-01

As part of a recent task under the EPRI Analytical Methods Qualification Program (RP 1851), TRW has surveyed the methods available for monitoring metal species in typical utility aqueous discharge streams. Methods for determining the individual species of these metals can become important in a regulatory sense as the EPA transitions to assessment of environmental risk based on bioavailability. For example, EPA considers methyl mercury and Cr(VI) much more toxic to the aquatic environment than inorganic mercury or Cr(III). The species of a given element can also differ in their transport and bioaccumulation. Methods for speciation generally include a selective separation step followed by standard metals analysis. Speciation, therefore, is mainly derived from the separation step and not from the method of final quantisation. Examples of separation/analysis include: selective extraction followed by graphite furnace atomic absorption or ICP-MS; separation by GC followed by metals detection; chelation and/or direct separation by LC followed by UV measurement or metals detection; and ion chromatography with conductivity, UV, or metals detection. There are a number of sampling issues associated with metal species such as stabilization (maintaining oxidation state), absorption, and filtration that need to be addressed in order to obtain and maintain a representative sample for analysis. 45 refs., 1 tab.

Comparison of survey and photogrammetry methods to position gravity data, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Ponce, D.A.; Wu, S.S.C.; Spielman, J.B.

1985-01-01

Locations of gravity stations at Yucca Mountain, Nevada, were determined by a survey using an electronic distance-measuring device and by a photogram-metric method. The data from both methods were compared to determine if horizontal and vertical coordinates developed from photogrammetry are sufficently accurate to position gravity data at the site. The results show that elevations from the photogrammetric data have a mean difference of 0.57 +- 0.70 m when compared with those of the surveyed data. Comparison of the horizontal control shows that the two methods agreed to within 0.01 minute. At a latitude of 45 0 , an error of 0.01 minute (18 m) corresponds to a gravity anomaly error of 0.015 mGal. Bouguer gravity anomalies are most sensitive to errors in elevation, thus elevation is the determining factor for use of photogrammetric or survey methods to position gravity data. Because gravity station positions are difficult to locate on aerial photographs, photogrammetric positions are not always exactly at the gravity station; therefore, large disagreements may appear when comparing electronic and photogrammetric measurements. A mean photogrammetric elevation error of 0.57 m corresponds to a gravity anomaly error of 0.11 mGal. Errors of 0.11 mGal are too large for high-precision or detailed gravity measurements but acceptable for regional work. 1 ref. 2 figs., 4 tabs

Formal methods for industrial critical systems a survey of applications

CERN Document Server

Margaria-Steffen, Tiziana

2012-01-01

"Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

County-level characteristics as predictors of dentists? ECC counseling in the USA: a survey study

OpenAIRE

Milgrom, Peter; Huebner, Colleen E; Mancl, Lloyd A; Chi, Donald L; Garson, Gayle; Grembowski, David

2013-01-01

Background Transmission of Streptococcus mutans from mother-to-child can lead to Early Childhood Caries. A previous study identified characteristics and beliefs of general dentists about counseling pregnant women to reduce risk of infection and Early Childhood Caries. This study extends those findings with an analysis of county level factors. Methods In 2006, we surveyed 732 general dentists in Oregon, USA about dental care for pregnant women. Survey items asked about individual and practice ...

Analysis of method of polarization surveying of water surface oil pollution

Science.gov (United States)

Zhukov, B. S.

1979-01-01

A method of polarization surveying of oil films on the water surface is analyzed. Model calculations of contrasted oil and water obtained with different orientations of the analyzer are discussed. The model depends on the spectral range, water transparency and oil film, and the selection of observational direction.

A survey of variable selection methods in two Chinese epidemiology journals

Directory of Open Access Journals (Sweden)

Lynn Henry S

2010-09-01

Full Text Available Abstract Background Although much has been written on developing better procedures for variable selection, there is little research on how it is practiced in actual studies. This review surveys the variable selection methods reported in two high-ranking Chinese epidemiology journals. Methods Articles published in 2004, 2006, and 2008 in the Chinese Journal of Epidemiology and the Chinese Journal of Preventive Medicine were reviewed. Five categories of methods were identified whereby variables were selected using: A - bivariate analyses; B - multivariable analysis; e.g. stepwise or individual significance testing of model coefficients; C - first bivariate analyses, followed by multivariable analysis; D - bivariate analyses or multivariable analysis; and E - other criteria like prior knowledge or personal judgment. Results Among the 287 articles that reported using variable selection methods, 6%, 26%, 30%, 21%, and 17% were in categories A through E, respectively. One hundred sixty-three studies selected variables using bivariate analyses, 80% (130/163 via multiple significance testing at the 5% alpha-level. Of the 219 multivariable analyses, 97 (44% used stepwise procedures, 89 (41% tested individual regression coefficients, but 33 (15% did not mention how variables were selected. Sixty percent (58/97 of the stepwise routines also did not specify the algorithm and/or significance levels. Conclusions The variable selection methods reported in the two journals were limited in variety, and details were often missing. Many studies still relied on problematic techniques like stepwise procedures and/or multiple testing of bivariate associations at the 0.05 alpha-level. These deficiencies should be rectified to safeguard the scientific validity of articles published in Chinese epidemiology journals.

Remote sensing, airborne radiometric survey and aeromagnetic survey data processing and analysis

International Nuclear Information System (INIS)

Dong Xiuzhen; Liu Dechang; Ye Fawang; Xuan Yanxiu

2009-01-01

Taking remote sensing data, airborne radiometric data and aero magnetic survey data as an example, the authors elaborate about basic thinking of remote sensing data processing methods, spectral feature analysis and adopted processing methods, also explore the remote sensing data combining with the processing of airborne radiometric survey and aero magnetic survey data, and analyze geological significance of processed image. It is not only useful for geological environment research and uranium prospecting in the study area, but also reference to applications in another area. (authors)

Examination of the equivalence of self-report survey-based paper-and-pencil and internet data collection methods.

Science.gov (United States)

Weigold, Arne; Weigold, Ingrid K; Russell, Elizabeth J

2013-03-01

Self-report survey-based data collection is increasingly carried out using the Internet, as opposed to the traditional paper-and-pencil method. However, previous research on the equivalence of these methods has yielded inconsistent findings. This may be due to methodological and statistical issues present in much of the literature, such as nonequivalent samples in different conditions due to recruitment, participant self-selection to conditions, and data collection procedures, as well as incomplete or inappropriate statistical procedures for examining equivalence. We conducted 2 studies examining the equivalence of paper-and-pencil and Internet data collection that accounted for these issues. In both studies, we used measures of personality, social desirability, and computer self-efficacy, and, in Study 2, we used personal growth initiative to assess quantitative equivalence (i.e., mean equivalence), qualitative equivalence (i.e., internal consistency and intercorrelations), and auxiliary equivalence (i.e., response rates, missing data, completion time, and comfort completing questionnaires using paper-and-pencil and the Internet). Study 1 investigated the effects of completing surveys via paper-and-pencil or the Internet in both traditional (i.e., lab) and natural (i.e., take-home) settings. Results indicated equivalence across conditions, except for auxiliary equivalence aspects of missing data and completion time. Study 2 examined mailed paper-and-pencil and Internet surveys without contact between experimenter and participants. Results indicated equivalence between conditions, except for auxiliary equivalence aspects of response rate for providing an address and completion time. Overall, the findings show that paper-and-pencil and Internet data collection methods are generally equivalent, particularly for quantitative and qualitative equivalence, with nonequivalence only for some aspects of auxiliary equivalence. PsycINFO Database Record (c) 2013 APA, all

A Study of Assertive Discipline and Recommendations for Effective Classroom Management Methods.

Science.gov (United States)

Ellis, David W.; Karr-Kidwell, PJ

Lee Canter's Assertive Discipline method was studied using a survey of 72 high school teachers' attitudes. Assertive Discipline calls for firm but fair rules, negative consequences for inappropriate behavior, and positive consequences for positive behavior, all set by the teacher. After a lengthy literature review, the survey is discussed.…

Consumer behaviour survey for assessing exposure from consumer products: a feasibility study.

Science.gov (United States)

Schneider, Klaus; Recke, Selina; Kaiser, Eva; Götte, Sebastian; Berkefeld, Henrike; Lässig, Juliane; Rüdiger, Thomas; Lindtner, Oliver; Oltmanns, Jan

2018-05-23

Evaluating chemical exposures from consumer products is an essential part of chemical safety assessments under REACH and may also be important to demonstrate compliance with consumer product legislation. Modelling of consumer exposure needs input information on the substance (e.g. vapour pressure), the product(s) containing the substance (e.g. concentration) and on consumer behaviour (e.g. use frequency and amount of product used). This feasibility study in Germany investigated methods for conducting a consumer survey in order to identify and retrieve information on frequency, duration, use amounts and use conditions for six example product types (four mixtures, two articles): hand dishwashing liquid, cockpit spray, fillers, paints and lacquers, shoes made of rubber or plastic, and ball-pens/pencils. Retrospective questionnaire methods (Consumer Product Questionnaire (CPQ), and Recall-Foresight Questionnaire (RFQ)) as well as protocol methods (written reporting by participants and video documentation) were used. A combination of retrospective questionnaire and written protocol methods was identified to provide valid information in a resource-efficient way. Relevant information, which can readily be used in exposure modelling, was obtained for all parameters and product types investigated. Based on the observations in this feasibility study, recommendations are given for designing a large consumer survey.

A Survey on Banknote Recognition Methods by Various Sensors

Science.gov (United States)

Lee, Ji Woo; Hong, Hyung Gil; Kim, Ki Wan; Park, Kang Ryoung

2017-01-01

Despite a decrease in the use of currency due to the recent growth in the use of electronic financial transactions, real money transactions remain very important in the global market. While performing transactions with real money, touching and counting notes by hand, is still a common practice in daily life, various types of automated machines, such as ATMs and banknote counters, are essential for large-scale and safe transactions. This paper presents studies that have been conducted in four major areas of research (banknote recognition, counterfeit banknote detection, serial number recognition, and fitness classification) in the accurate banknote recognition field by various sensors in such automated machines, and describes the advantages and drawbacks of the methods presented in those studies. While to a limited extent some surveys have been presented in previous studies in the areas of banknote recognition or counterfeit banknote recognition, this paper is the first of its kind to review all four areas. Techniques used in each of the four areas recognize banknote information (denomination, serial number, authenticity, and physical condition) based on image or sensor data, and are actually applied to banknote processing machines across the world. This study also describes the technological challenges faced by such banknote recognition techniques and presents future directions of research to overcome them. PMID:28208733

Pairing field methods to improve inference in wildlife surveys while accommodating detection covariance.

Science.gov (United States)

Clare, John; McKinney, Shawn T; DePue, John E; Loftin, Cynthia S

2017-10-01

It is common to use multiple field sampling methods when implementing wildlife surveys to compare method efficacy or cost efficiency, integrate distinct pieces of information provided by separate methods, or evaluate method-specific biases and misclassification error. Existing models that combine information from multiple field methods or sampling devices permit rigorous comparison of method-specific detection parameters, enable estimation of additional parameters such as false-positive detection probability, and improve occurrence or abundance estimates, but with the assumption that the separate sampling methods produce detections independently of one another. This assumption is tenuous if methods are paired or deployed in close proximity simultaneously, a common practice that reduces the additional effort required to implement multiple methods and reduces the risk that differences between method-specific detection parameters are confounded by other environmental factors. We develop occupancy and spatial capture-recapture models that permit covariance between the detections produced by different methods, use simulation to compare estimator performance of the new models to models assuming independence, and provide an empirical application based on American marten (Martes americana) surveys using paired remote cameras, hair catches, and snow tracking. Simulation results indicate existing models that assume that methods independently detect organisms produce biased parameter estimates and substantially understate estimate uncertainty when this assumption is violated, while our reformulated models are robust to either methodological independence or covariance. Empirical results suggested that remote cameras and snow tracking had comparable probability of detecting present martens, but that snow tracking also produced false-positive marten detections that could potentially substantially bias distribution estimates if not corrected for. Remote cameras detected marten

Regional South Australia Health (RESONATE) survey: study protocol

Science.gov (United States)

Jones, Martin; Gillam, Marianne; May, Esther

2018-01-01

Introduction Access to quality healthcare services is considered a moral right. However, for people living in regional locations, timely access to the services that they need may not always be possible because of structural and attitudinal barriers. This suggests that people living in regional areas may have unmet healthcare needs. The aim of this research will be to examine the healthcare needs, expectations and experiences of regional South Australians. Methods and analysis The Regional South Australia Health (RESONATE) survey is a cross-sectional study of adult health consumers living in any private or non-private dwelling, in any regional, rural, remote or very remote area of South Australia and with an understanding of written English. Data will be collected using a 45-item, multidimensional, self-administered instrument, designed to measure healthcare need, barriers to healthcare access and health service utilisation, attitudes, experiences and satisfaction. The instrument has demonstrated acceptable psychometric properties, including good content validity and internal reliability, good test–retest reliability and a high level of acceptability. The survey will be administered online and in hard-copy, with at least 1832 survey participants to be recruited over a 12-month period, using a comprehensive, multimodal recruitment campaign. Ethics and dissemination The study has been reviewed and approved by the Human Research Ethics Committee of the University of South Australia. The results will be actively disseminated through peer-reviewed journals, conference presentations, social media, broadcast media, print media, the internet and various community/stakeholder engagement activities. PMID:29654014

Development and Psychometric Evaluation of the HPV Clinical Trial Survey for Parents (CTSP-HPV) Using Traditional Survey Development Methods and Community Engagement Principles.

Science.gov (United States)

Cunningham, Jennifer; Wallston, Kenneth A; Wilkins, Consuelo H; Hull, Pamela C; Miller, Stephania T

2015-12-01

This study describes the development and psychometric evaluation of HPV Clinical Trial Survey for Parents with Children Aged 9 to 15 (CTSP-HPV) using traditional instrument development methods and community engagement principles. An expert panel and parental input informed survey content and parents recommended study design changes (e.g., flyer wording). A convenience sample of 256 parents completed the final survey measuring parental willingness to consent to HPV clinical trial (CT) participation and other factors hypothesized to influence willingness (e.g., HPV vaccine benefits). Cronbach's a, Spearman correlations, and multiple linear regression were used to estimate internal consistency, convergent and discriminant validity, and predictively validity, respectively. Internal reliability was confirmed for all scales (a ≥ 0.70.). Parental willingness was positively associated (p < 0.05) with trust in medical researchers, adolescent CT knowledge, HPV vaccine benefits, advantages of adolescent CTs (r range 0.33-0.42), supporting convergent validity. Moderate discriminant construct validity was also demonstrated. Regression results indicate reasonable predictive validity with the six scales accounting for 31% of the variance in parents' willingness. This instrument can inform interventions based on factors that influence parental willingness, which may lead to the eventual increase in trial participation. Further psychometric testing is warranted. © 2015 Wiley Periodicals, Inc.

Verification study on technology for site investigation for geological disposal. Confirmation of the applicability of survey methods through establishing site descriptive models in accordance with stepwise investigation approach

International Nuclear Information System (INIS)

Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Hamada, Takaomi; Yoshimura, Kimitaka

2014-01-01

The Yokosuka Demonstration and Validation Project, which uses the Yokosuka Central Research Institute of Electric Power Industry (CRIEPI) site, a Neogene sedimentary and coastal environment, has been conducted since the 2006 fiscal year as a cooperative research project between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project were to examine and refine the basic methodology of the investigation and assessment in accordance with the conditions of geological environment at each stage of investigations from the surface (Preliminary Investigation and the first half of Detailed Investigation conducted by NUMO) for high level radioactive waste geological disposal. Within investigation technologies at these early stages, a borehole survey is an important means of directly obtaining various properties of the deep geological environment. On the other hand, surface geophysical prospecting data provide information about the geological and resistivity structures at depth for planning borehole surveys. During the 2006-2009 fiscal years, a series of on-site surveys and tests, including borehole surveys of YDP-1 (depth: 350 m) and YDP-2 (depth: 500 m), were conducted in this test site. Furthermore, seismic surveys (including seismic reflection method) and electromagnetic surveys (including magnetotelluric method) were conducted within the expanded CRIEPI site in the 2010 fiscal year to obtain information about the geological structure, and the resistivity structure reflecting the distribution of the salt water/fresh water boundary, respectively, to a depth of over several hundred meters. The validity of existing survey and testing methods for stepwise investigations (from surface to borehole surveys) for obtaining properties of the geological environment (in various conditions relating to differences in the properties of the Miura and the Hayama Groups at this site) was confirmed through establishing site descriptive models based on

Estimating mortality from external causes using data from retrospective surveys: A validation study in Niakhar (Senegal

Directory of Open Access Journals (Sweden)

Gilles Pison

2018-03-01

Full Text Available Background: In low- and middle-income countries (LMICs, data on causes of death is often inaccurate or incomplete. In this paper, we test whether adding a few questions about injuries and accidents to mortality questionnaires used in representative household surveys would yield accurate estimates of the extent of mortality due to external causes (accidents, homicides, or suicides. Methods: We conduct a validation study in Niakhar (Senegal, during which we compare reported survey data to high-quality prospective records of deaths collected by a health and demographic surveillance system (HDSS. Results: Survey respondents more frequently list the deaths of their adult siblings who die of external causes than the deaths of those who die from other causes. The specificity of survey data is high, but sensitivity is low. Among reported deaths, less than 60Š of the deaths classified as due to external causes by the HDSS are also classified as such by survey respondents. Survey respondents better report deaths due to road-traffic accidents than deaths from suicides and homicides. Conclusions: Asking questions about deaths resulting from injuries and accidents during surveys might help measure mortality from external causes in LMICs, but the resulting data displays systematic bias in a rural population of Senegal. Future studies should 1 investigate whether similar biases also apply in other settings and 2 test new methods to further improve the accuracy of survey data on mortality from external causes. Contribution: This study helps strengthen the monitoring of sustainable development targets in LMICs by validating a simple approach for the measurement of mortality from external causes.

Feasibility study of structured diagnosis methods for functional dyspepsia in Korean medicine clinics

Directory of Open Access Journals (Sweden)

Jeong Hwan Park

2017-12-01

Full Text Available Background: Functional dyspepsia (FD is the seventh most common disease encountered in Korean medicine (KM clinics. Despite the large number of FD patients visiting KM clinics, the accumulated medical records have no utility in evidence development, due to being unstructured. This study aimed to construct a standard operating procedure (SOP with appropriate structured diagnostic methods for FD, and assess the feasibility for use in KM clinics. Methods: Two rounds of professional surveys were conducted by 10 Korean internal medicine professors to select the representative diagnostic methods. A feasibility study was conducted to evaluate compliance and time required for using the structured diagnostic methods by three specialists in two hospitals. Results: As per the results of the professional survey, five questionnaires and one basic diagnostic method were selected. An SOP was constructed based on the survey results, and a feasibility study showed that the SOP compliance score (out of 5 was 3.45 among the subjects, and 3.25 among the practitioners. The SOP was acceptable and was not deemed difficult to execute. The total execution time was 136.5 minutes, out of which the gastric emptying test time was 129 minutes. Conclusion: This feasibility study of the SOP with structured diagnostic methods for FD confirmed it was adequate for use in KM clinics. It is expected that these study findings will be helpful to clinicians who wish to conduct observational studies as well as to generate quantitative medical records to facilitate Big Data research. Keywords: Big Data, Dyspepsia, Korean medicine, Feasibility studies, Observational study

Sexual behaviour research using the survey method: a critique of the literature over the last six years.

Science.gov (United States)

Malacad, Brea L; Hess, Gretchen C

2011-10-01

The survey method is often used to identify trends in sexual behaviour and attitudes. In order for research conclusions to be valid, however, data gathered from surveys must be unambiguous. For the current paper we reviewed survey research of sexual behaviour published in recent years. Our objective was to identify common methodological issues and provide recommendations for how to address them. We examined 62 articles, published in four prominent sexual health journals over the past six years. We evaluated each article based on how adequately its authors addressed four recurring methodological issues: ambiguous terminology, heterosexual bias, procedures that compromise honesty in responses, and survey language/literacy considerations. The review revealed some recurring issues: 47% of the studies failed to address the question of sexual orientation, sexual behaviour terminology was explicitly defined in only 32% of questionnaires, fewer than 5% of surveys clarified whether the sexual encounters in question were consensual, and 21% of the articles contained no mention of anonymity or confidentiality for participants. These results reveal common issues with survey data that compromise the validity of findings. In order to have confidence in research conclusions and recommendations, it is important that these issues be addressed.

Application of the surface azimuthal electrical resistivity survey method to determine patterns of regional joint orientation in glacial tills

Science.gov (United States)

Carlson, D.

2010-01-01

Joints within unconsolidated material such as glacial till can be primary avenues for the flow of electrical charge, water, and contaminants. To facilitate the siting and design of remediation programs, a need exists to map anisotropic distribution of such pathways within glacial tills by determining the azimuth of the dominant joint set. The azimuthal survey method uses standard resistivity equipment with a Wenner array rotated about a fixed center point at selected degree intervals that yields an apparent resistivity ellipse. From this ellipse, joint set orientation can be determined. Azimuthal surveys were conducted at 21 sites in a 500-km2 (193 mi2) area around Milwaukee, Wisconsin, and more specifically, at sites having more than 30 m (98 ft) of glacial till (to minimize the influence of underlying bedrock joints). The 26 azimuthal surveys revealed a systematic pattern to the trend of the dominant joint set within the tills, which is approximately parallel to ice flow direction during till deposition. The average orientation of the joint set parallel with the ice flow direction is N77??E and N37??E for the Oak Creek and Ozaukee tills, respectively. The mean difference between average direct observation of joint set orientations and average azimuthal resistivity results is 8??, which is one fifth of the difference of ice flow direction between the Ozaukee and Oak Creek tills. The results of this study suggest that the surface azimuthal electrical resistivity survey method used for local in situ studies can be a useful noninvasive method for delineating joint sets within shallow geologic material for regional studies. Copyright ?? 2010 The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Study Abroad Survey Instruments: A Comparison of Survey Types and Experiences

Science.gov (United States)

Durrant, Marie Bradshaw; Dorius, Cassandra Rasmussen

2007-01-01

This study examines different survey instruments used to assess the experiences of U.S. study abroad participants. The intended audience is international and area study practitioners interested in assessing study abroad programs through postprogram interviews. An interview with the top 20 universities for number of students sent on study abroad…

Mobile acoustic transects miss rare bat species: implications of survey method and spatio-temporal sampling for monitoring bats

Directory of Open Access Journals (Sweden)

Elizabeth C. Braun de Torrez

2017-11-01

Full Text Available Due to increasing threats facing bats, long-term monitoring protocols are needed to inform conservation strategies. Effective monitoring should be easily repeatable while capturing spatio-temporal variation. Mobile acoustic driving transect surveys (‘mobile transects’ have been touted as a robust, cost-effective method to monitor bats; however, it is not clear how well mobile transects represent dynamic bat communities, especially when used as the sole survey approach. To assist biologists who must select a single survey method due to resource limitations, we assessed the effectiveness of three acoustic survey methods at detecting species richness in a vast protected area (Everglades National Park: (1 mobile transects, (2 stationary surveys that were strategically located by sources of open water and (3 stationary surveys that were replicated spatially across the landscape. We found that mobile transects underrepresented bat species richness compared to stationary surveys across all major vegetation communities and in two distinct seasons (dry/cool and wet/warm. Most critically, mobile transects failed to detect three rare bat species, one of which is federally endangered. Spatially replicated stationary surveys did not estimate higher species richness than strategically located stationary surveys, but increased the rate at which species were detected in one vegetation community. The survey strategy that detected maximum species richness and the highest mean nightly species richness with minimal effort was a strategically located stationary detector in each of two major vegetation communities during the wet/warm season.

Mobile acoustic transects miss rare bat species: implications of survey method and spatio-temporal sampling for monitoring bats.

Science.gov (United States)

Braun de Torrez, Elizabeth C; Wallrichs, Megan A; Ober, Holly K; McCleery, Robert A

2017-01-01

Due to increasing threats facing bats, long-term monitoring protocols are needed to inform conservation strategies. Effective monitoring should be easily repeatable while capturing spatio-temporal variation. Mobile acoustic driving transect surveys ('mobile transects') have been touted as a robust, cost-effective method to monitor bats; however, it is not clear how well mobile transects represent dynamic bat communities, especially when used as the sole survey approach. To assist biologists who must select a single survey method due to resource limitations, we assessed the effectiveness of three acoustic survey methods at detecting species richness in a vast protected area (Everglades National Park): (1) mobile transects, (2) stationary surveys that were strategically located by sources of open water and (3) stationary surveys that were replicated spatially across the landscape. We found that mobile transects underrepresented bat species richness compared to stationary surveys across all major vegetation communities and in two distinct seasons (dry/cool and wet/warm). Most critically, mobile transects failed to detect three rare bat species, one of which is federally endangered. Spatially replicated stationary surveys did not estimate higher species richness than strategically located stationary surveys, but increased the rate at which species were detected in one vegetation community. The survey strategy that detected maximum species richness and the highest mean nightly species richness with minimal effort was a strategically located stationary detector in each of two major vegetation communities during the wet/warm season.

[Sampling and measurement methods of the protocol design of the China Nine-Province Survey for blindness, visual impairment and cataract surgery].

Science.gov (United States)

Zhao, Jia-liang; Wang, Yu; Gao, Xue-cheng; Ellwein, Leon B; Liu, Hu

2011-09-01

To design the protocol of the China nine-province survey for blindness, visual impairment and cataract surgery to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery. The protocol design was began after accepting the task for the national survey for blindness, visual impairment and cataract surgery from the Department of Medicine, Ministry of Health, China, in November, 2005. The protocol in Beijing Shunyi Eye Study in 1996 and Guangdong Doumen County Eye Study in 1997, both supported by World Health Organization, was taken as the basis for the protocol design. The relative experts were invited to discuss and prove the draft protocol. An international advisor committee was established to examine and approve the draft protocol. Finally, the survey protocol was checked and approved by the Department of Medicine, Ministry of Health, China and Prevention Program of Blindness and Deafness, WHO. The survey protocol was designed according to the characteristics and the scale of the survey. The contents of the protocol included determination of target population and survey sites, calculation of the sample size, design of the random sampling, composition and organization of the survey teams, determination of the examinee, the flowchart of the field work, survey items and methods, diagnostic criteria of blindness and moderate and sever visual impairment, the measures of the quality control, the methods of the data management. The designed protocol became the standard and practical protocol for the survey to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery.

Survey and assessment of conventional software verification and validation methods

International Nuclear Information System (INIS)

Miller, L.A.; Groundwater, E.; Mirsky, S.M.

1993-04-01

By means of a literature survey, a comprehensive set of methods was identified for the verification and validation of conventional software. The 134 methods so identified were classified according to their appropriateness for various phases of a developmental lifecycle -- requirements, design, and implementation; the last category was subdivided into two, static testing and dynamic testing methods. The methods were then characterized in terms of eight rating factors, four concerning ease-of-use of the methods and four concerning the methods' power to detect defects. Based on these factors, two measurements were developed to permit quantitative comparisons among methods, a Cost-Benefit metric and an Effectiveness Metric. The Effectiveness Metric was further refined to provide three different estimates for each method, depending on three classes of needed stringency of V ampersand V (determined by ratings of a system's complexity and required-integrity). Methods were then rank-ordered for each of the three classes in terms of their overall cost-benefits and effectiveness. The applicability was then assessed of each method for the four identified components of knowledge-based and expert systems, as well as the system as a whole

Study on Developments in Accident Investigation Methods: A Survey of the 'State-of-the-Art'

International Nuclear Information System (INIS)

Hollnagel, Erik; Speziali, Josephine

2008-01-01

The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or 'human error'. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains, including nuclear power production, accident investigation methods are only updated when their inability to account for novel types of accidents and incidents becomes inescapable. Accident investigation methods therefore typically lag behind the socio-technological developments by 20 years or more. The project first compiled a set of methods from the recognised scientific literature and in major major research and development programs, excluding methods limited to risk assessment, technological malfunctions, human reliability, and safety management methods. An initial set of 21 methods was further reduced to seven by retaining only prima facie accident investigation methods and avoiding overlapping or highly similar methods. The second step was to develop a set of criteria used to characterise the methods. The starting point was Perrow's description of normal accidents in socio-technical systems, which used the dimensions of coupling, going from loose to tight, and interactions, going from linear to complex. For practical reasons, the second dimension was changed to that of tractability or how easy it is to describe the system, where the sub-criteria are the level of detail, the availability of an articulated model, and the system dynamics. On this basis the seven selected methods were characterised in terms of the systems - or conditions - they could account for, leading to the following four groups: methods suitable for systems that are loosely coupled and tractable, methods suitable for systems that are tightly coupled and tractable, methods suitable for systems that are loosely

Identifying the site of granite uranium deposit with radon survey and soil-natural themoluminescence survey. A case study of Xiazhuang granite uranium field

International Nuclear Information System (INIS)

Yang Yaxin; Wu Yamei; Wu Xinmin; Chen Yue; Zheng Yongming; Zhang Ye; Wu Lieqin

2007-01-01

This paper briefly introduces the methods and procedures for field and indoor radon survey and themoluminescence (TL) survey. The application of these two methods to Xiazhuang uranium field in Guangdong province shows: (1) the positive anomalies of radon survey coincide well with fractured zone and the positive anomalies of TL survey response to uranium mineralization on granite type uranium deposit of silicated fracture zone, the uranium deposit can be effectively explored when these two kinds of anomalies match together. (2) the positive anomalies of radon survey coincide well with fractured zone and the positive anomalies of TL response to the position that intersection between the fractured zone and diabase dyke is projected on the ground. (authors)

A multi-method high-resolution geophysical survey in the Machado de Castro museum, central Portugal

International Nuclear Information System (INIS)

Grangeia, Carlos; Matias, Manuel; Hermozilha, Hélder; Figueiredo, Fernando; Carvalho, Pedro; Silva, Ricardo

2011-01-01

Restoration of historical buildings is a delicate operation as they are often built over more ancient and important structures. The Machado de Castro Museum, Coimbra, Central Portugal, has suffered several interventions in historical times and lies over the ancient Roman forum of Coimbra. This building went through a restoration project. These works were preceded by an extensive geophysical survey that aimed at investigating subsurface stratigraphy, including archeological remains, and the internal structure of the actual walls. Owing to the needs of the project, geophysical data interpretation required not only integration but also high resolution. The study consisted of data acquisition over perpendicular planes and different levels that required detailed survey planning and integration of data from different locations that complement images of the surveyed area. Therefore a multi-method, resistivity imaging and a 3D ground probing radar (GPR), high-resolution geophysical survey was done inside the museum. Herein, radargrams are compared with the revealed stratigraphy so that signatures are interpreted, characterized and assigned to archeological structures. Although resistivity and GPR have different resolution capabilities, their data are overlapped and compared, bearing in mind the specific characteristics of this survey. It was also possible to unravel the inner structure of the actual walls, to establish connections between walls, foundations and to find older remains with the combined use and spatial integration of the GPR and resistivity imaging data

Effects of phone versus mail survey methods on the measurement of health-related quality of life and emotional and behavioural problems in adolescents.

Science.gov (United States)

Erhart, Michael; Wetzel, Ralf M; Krügel, André; Ravens-Sieberer, Ulrike

2009-12-30

Telephone interviews have become established as an alternative to traditional mail surveys for collecting epidemiological data in public health research. However, the use of telephone and mail surveys raises the question of to what extent the results of different data collection methods deviate from one another. We therefore set out to study possible differences in using telephone and mail survey methods to measure health-related quality of life and emotional and behavioural problems in children and adolescents. A total of 1700 German children aged 8-18 years and their parents were interviewed randomly either by telephone or by mail. Health-related Quality of Life (HRQoL) and mental health problems (MHP) were assessed using the KINDL-R Quality of Life instrument and the Strengths and Difficulties Questionnaire (SDQ) children's self-report and parent proxy report versions. Mean Differences ("d" effect size) and differences in Cronbach alpha were examined across modes of administration. Pearson correlation between children's and parents' scores was calculated within a multi-trait-multi-method (MTMM) analysis and compared across survey modes using Fisher-Z transformation. Telephone and mail survey methods resulted in similar completion rates and similar socio-demographic and socio-economic makeups of the samples. Telephone methods resulted in more positive self- and parent proxy reports of children's HRQoL (SMD survey self/proxy Total: 0.84/0.87). KINDL MTMM results were weaker for the phone surveys: mono-trait-multi-method mean r = 0.31 (mail: r = 0.45); multi-trait-mono-method mean (self/parents) r = 0.29/0.36 (mail: r = 0.34/0.40); multi-trait-multi-method mean r = 0.14 (mail: r = 0.21). Weaker MTMM results were also observed for the phone administered SDQ: mono-trait-multi-method mean r = 0.32 (mail: r = 0.40); multi-trait-mono-method mean (self/parents) r = 0.24/0.30 (mail: r = 0.20/0.32); multi-trait-multi-method mean r = 0.14 (mail = 0.14). The SDQ

Utilizing the Total Design Method in medicine: maximizing response rates in long, non-incentivized, personal questionnaire postal surveys.

Science.gov (United States)

Kazzazi, Fawz; Haggie, Rebecca; Forouhi, Parto; Kazzazi, Nazar; Malata, Charles M

2018-01-01

Maximizing response rates in questionnaires can improve their validity and quality by reducing non-response bias. A comprehensive analysis is essential for producing reasonable conclusions in patient-reported outcome research particularly for topics of a sensitive nature. This often makes long (≥7 pages) questionnaires necessary but these have been shown to reduce response rates in mail surveys. Our work adapted the "Total Design Method," initially produced for commercial markets, to raise response rates in a long (total: 11 pages, 116 questions), non-incentivized, very personal postal survey sent to almost 350 women. A total of 346 women who had undergone mastectomy and immediate breast reconstruction from 2008-2014 (inclusive) at Addenbrooke's University Hospital were sent our study pack (Breast-Q satisfaction questionnaire and support documents) using our modified "Total Design Method." Participants were sent packs and reminders according to our designed schedule. Of the 346 participants, we received 258 responses, an overall response rate of 74.5% with a useable response rate of 72.3%. One hundred and six responses were received before the week 1 reminder (30.6%), 120 before week 3 (34.6%), 225 before the week 7 reminder (64.6%) and the remainder within 3 weeks of the final pack being sent. The median age of patients that the survey was sent to, and the median age of the respondents, was 54 years. In this study, we have demonstrated the successful implementation of a novel approach to postal surveys. Despite the length of the questionnaire (nine pages, 116 questions) and limitations of expenses to mail a survey to ~350 women, we were able to attain a response rate of 74.6%.

Testing survey-based methods for rapid monitoring of child mortality, with implications for summary birth history data.

Science.gov (United States)

Brady, Eoghan; Hill, Kenneth

2017-01-01

Under-five mortality estimates are increasingly used in low and middle income countries to target interventions and measure performance against global development goals. Two new methods to rapidly estimate under-5 mortality based on Summary Birth Histories (SBH) were described in a previous paper and tested with data available. This analysis tests the methods using data appropriate to each method from 5 countries that lack vital registration systems. SBH data are collected across many countries through censuses and surveys, and indirect methods often rely upon their quality to estimate mortality rates. The Birth History Imputation method imputes data from a recent Full Birth History (FBH) onto the birth, death and age distribution of the SBH to produce estimates based on the resulting distribution of child mortality. DHS FBHs and MICS SBHs are used for all five countries. In the implementation, 43 of 70 estimates are within 20% of validation estimates (61%). Mean Absolute Relative Error is 17.7.%. 1 of 7 countries produces acceptable estimates. The Cohort Change method considers the differences in births and deaths between repeated Summary Birth Histories at 1 or 2-year intervals to estimate the mortality rate in that period. SBHs are taken from Brazil's PNAD Surveys 2004-2011 and validated against IGME estimates. 2 of 10 estimates are within 10% of validation estimates. Mean absolute relative error is greater than 100%. Appropriate testing of these new methods demonstrates that they do not produce sufficiently good estimates based on the data available. We conclude this is due to the poor quality of most SBH data included in the study. This has wider implications for the next round of censuses and future household surveys across many low- and middle- income countries.

From Ethnography to Items: A Mixed Methods Approach to Developing a Survey to Examine Graduate Engineering Student Retention

Science.gov (United States)

Crede, Erin; Borrego, Maura

2013-01-01

As part of a sequential exploratory mixed methods study, 9 months of ethnographically guided observations and interviews were used to develop a survey examining graduate engineering student retention. Findings from the ethnographic fieldwork yielded several themes, including international diversity, research group organization and climate,…

Methods for environmental change; an exploratory study

NARCIS (Netherlands)

Nell Gottlieb; Robert Panne; Chris Smerecnik; Gerjo Kok

2012-01-01

Background: While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how

Continuing to Confront COPD International Patient Survey : methods, COPD prevalence, and disease burden in 2012-2013

NARCIS (Netherlands)

Landis, Sarah H.; Muellerova, Hana; Mannino, David M.; Menezes, Ana M.; Han, MeiLan K.; van der Molen, Thys; Ichinose, Masakazu; Aisanov, Zaurbek; Oh, Yeon-Mok; Davis, Kourtney J.

2014-01-01

Purpose: The Continuing to Confront COPD International Patient Survey aimed to estimate the prevalence and burden of COPD globally and to update findings from the Confronting COPD International Survey conducted in 1999-2000. Materials and methods: Chronic obstructive pulmonary disease (COPD)

Photometric calibration of the COMBO-17 survey with the Softassign Procrustes Matching method

Science.gov (United States)

Sheikhbahaee, Z.; Nakajima, R.; Erben, T.; Schneider, P.; Hildebrandt, H.; Becker, A. C.

2017-11-01

Accurate photometric calibration of optical data is crucial for photometric redshift estimation. We present the Softassign Procrustes Matching (SPM) method to improve the colour calibration upon the commonly used Stellar Locus Regression (SLR) method for the COMBO-17 survey. Our colour calibration approach can be categorised as a point-set matching method, which is frequently used in medical imaging and pattern recognition. We attain a photometric redshift precision Δz/(1 + zs) of better than 2 per cent. Our method is based on aligning the stellar locus of the uncalibrated stars to that of a spectroscopic sample of the Sloan Digital Sky Survey standard stars. We achieve our goal by finding a correspondence matrix between the two point-sets and applying the matrix to estimate the appropriate translations in multidimensional colour space. The SPM method is able to find the translation between two point-sets, despite the existence of noise and incompleteness of the common structures in the sets, as long as there is a distinct structure in at least one of the colour-colour pairs. We demonstrate the precision of our colour calibration method with a mock catalogue. The SPM colour calibration code is publicly available at https://neuronphysics@bitbucket.org/neuronphysics/spm.git.

Comparison of self-administered survey questionnaire responses collected using mobile apps versus other methods.

Science.gov (United States)

Marcano Belisario, José S; Jamsek, Jan; Huckvale, Kit; O'Donoghue, John; Morrison, Cecily P; Car, Josip

2015-07-27

Self-administered survey questionnaires are an important data collection tool in clinical practice, public health research and epidemiology. They are ideal for achieving a wide geographic coverage of the target population, dealing with sensitive topics and are less resource-intensive than other data collection methods. These survey questionnaires can be delivered electronically, which can maximise the scalability and speed of data collection while reducing cost. In recent years, the use of apps running on consumer smart devices (i.e., smartphones and tablets) for this purpose has received considerable attention. However, variation in the mode of delivering a survey questionnaire could affect the quality of the responses collected. To assess the impact that smartphone and tablet apps as a delivery mode have on the quality of survey questionnaire responses compared to any other alternative delivery mode: paper, laptop computer, tablet computer (manufactured before 2007), short message service (SMS) and plastic objects. We searched MEDLINE, EMBASE, PsycINFO, IEEEXplore, Web of Science, CABI: CAB Abstracts, Current Contents Connect, ACM Digital, ERIC, Sociological Abstracts, Health Management Information Consortium, the Campbell Library and CENTRAL. We also searched registers of current and ongoing clinical trials such as ClinicalTrials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform. We also searched the grey literature in OpenGrey, Mobile Active and ProQuest Dissertation & Theses. Lastly, we searched Google Scholar and the reference lists of included studies and relevant systematic reviews. We performed all searches up to 12 and 13 April 2015. We included parallel randomised controlled trials (RCTs), crossover trials and paired repeated measures studies that compared the electronic delivery of self-administered survey questionnaires via a smartphone or tablet app with any other delivery mode. We included data obtained from

Effects of phone versus mail survey methods on the measurement of health-related quality of life and emotional and behavioural problems in adolescents

Directory of Open Access Journals (Sweden)

Ravens-Sieberer Ulrike

2009-12-01

Full Text Available Abstract Background Telephone interviews have become established as an alternative to traditional mail surveys for collecting epidemiological data in public health research. However, the use of telephone and mail surveys raises the question of to what extent the results of different data collection methods deviate from one another. We therefore set out to study possible differences in using telephone and mail survey methods to measure health-related quality of life and emotional and behavioural problems in children and adolescents. Methods A total of 1700 German children aged 8-18 years and their parents were interviewed randomly either by telephone or by mail. Health-related Quality of Life (HRQoL and mental health problems (MHP were assessed using the KINDL-R Quality of Life instrument and the Strengths and Difficulties Questionnaire (SDQ children's self-report and parent proxy report versions. Mean Differences ("d" effect size and differences in Cronbach alpha were examined across modes of administration. Pearson correlation between children's and parents' scores was calculated within a multi-trait-multi-method (MTMM analysis and compared across survey modes using Fisher-Z transformation. Results Telephone and mail survey methods resulted in similar completion rates and similar socio-demographic and socio-economic makeups of the samples. Telephone methods resulted in more positive self- and parent proxy reports of children's HRQoL (SMD ≤ 0.27 and MHP (SMD ≤ 0.32 on many scales. For the phone administered KINDL, lower Cronbach alpha values (self/proxy Total: 0.79/0.84 were observed (mail survey self/proxy Total: 0.84/0.87. KINDL MTMM results were weaker for the phone surveys: mono-trait-multi-method mean r = 0.31 (mail: r = 0.45; multi-trait-mono-method mean (self/parents r = 0.29/0.36 (mail: r = 0.34/0.40; multi-trait-multi-method mean r = 0.14 (mail: r = 0.21. Weaker MTMM results were also observed for the phone administered SDQ: mono-trait-multi-method

Survey and analysis of deep water mineral deposits using nuclear methods

International Nuclear Information System (INIS)

Staehle, C.M.; Noakes, J.E.; Spaulding, J.

1991-01-01

Present knowledge of the location, quality, quantity and recoverability of sea floor minerals is severely limited, particularly in the abyssal depths and deep water within the 200 mile Exclusion Economic Zone (EEZ) surrounding the U.S. Pacific Islands. To improve this understanding and permit exploitation of these mineral reserves much additional data is needed. This paper will discuss a sponsored program for extending existing proven nuclear survey methods currently used on the shallow continental margins of the Atlantic and Gulf of Mexico into the deeper waters of the Pacific. This nuclear technology can be readily integrated and extended to depths of 2000 m using the existing RCV-150 remotely operated vehicle (ROV) and the PISCESE V manned deep submersible vehicle (DSV) operated by The University of Hawaii's, Hawaii Underseas Research Laboratory (HURL). Previous papers by the authors have also proposed incorporating these nuclear analytical methods for survey of the deep ocean through the use of Autonomous Underwater Vehicle (AUX). Such a vehicle could extend the use of passive nuclear instrument operation, in addition to conventional analytical methods, into the abyssal depths and do so with speed and economy not otherwise possible. The natural radioactivity associated with manganese nodules and crustal deposits is sufficiently above normal background levels to allow discrimination and quantification in near real time

Methods and introductory results of the Greek national health and nutrition survey - HYDRIA

Directory of Open Access Journals (Sweden)

Georgia Martimianaki

2018-06-01

Full Text Available Background:  According to a large prospective cohort study (with baseline examination in the 1990s and smaller studies that followed, the population in Greece has been gradually deprived of the favorable morbidity and mortality indices recorded in the 1960s. The HYDRIA survey conducted in 2013-14 is the first nationally representative survey, which collected data related to the health and nutrition of the population in Greece. Methods: The survey sample consists of 4011 males (47% and females aged 18 years and over. Data collection included interviewer-administered questionnaires on personal characteristics, lifestyle choices, dietary habits and medical history; measurements of somatometry and blood pressure; and, blood drawing. Weighting factors were applied to ensure national representativeness of results. Results: Three out of five adults in Greece reported suffering of a chronic disease, with diabetes mellitus and chronic depression being the more frequent ones among older individuals. The population is also experiencing an overweight/obesity epidemic, since seven out of 10 adults are either overweight or obese. In addition, 40% of the population bears indications of hypertension. Smoking is still common and among women the prevalence was higher in younger age groups. Social disparities were observed in the prevalence of chronic diseases and mortality risk factors (hypertension, obesity, impaired lipid profile and high blood glucose levels. Conclusion: Excess body weight, hypertension, the smoking habit and the population’s limited physical activity are the predominant challenges that public health officials have to deal with in formulating policies and designing actions for the population in Greece.

Comparing two remote video survey methods for spatial predictions of the distribution and environmental niche suitability of demersal fishes.

Science.gov (United States)

Galaiduk, Ronen; Radford, Ben T; Wilson, Shaun K; Harvey, Euan S

2017-12-15

Information on habitat associations from survey data, combined with spatial modelling, allow the development of more refined species distribution modelling which may identify areas of high conservation/fisheries value and consequentially improve conservation efforts. Generalised additive models were used to model the probability of occurrence of six focal species after surveys that utilised two remote underwater video sampling methods (i.e. baited and towed video). Models developed for the towed video method had consistently better predictive performance for all but one study species although only three models had a good to fair fit, and the rest were poor fits, highlighting the challenges associated with modelling habitat associations of marine species in highly homogenous, low relief environments. Models based on baited video dataset regularly included large-scale measures of structural complexity, suggesting fish attraction to a single focus point by bait. Conversely, models based on the towed video data often incorporated small-scale measures of habitat complexity and were more likely to reflect true species-habitat relationships. The cost associated with use of the towed video systems for surveying low-relief seascapes was also relatively low providing additional support for considering this method for marine spatial ecological modelling.

Fast and accurate methods of independent component analysis: A survey

Czech Academy of Sciences Publication Activity Database

Tichavský, Petr; Koldovský, Zbyněk

2011-01-01

Roč. 47, č. 3 (2011), s. 426-438 ISSN 0023-5954 R&D Projects: GA MŠk 1M0572; GA ČR GA102/09/1278 Institutional research plan: CEZ:AV0Z10750506 Keywords : Blind source separation * artifact removal * electroencephalogram * audio signal processing Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.454, year: 2011 http://library.utia.cas.cz/separaty/2011/SI/tichavsky-fast and accurate methods of independent component analysis a survey.pdf

Factors affecting study efficiency and item non-response in health surveys in developing countries: the Jamaica national healthy lifestyle survey

Directory of Open Access Journals (Sweden)

Bennett Franklyn

2007-02-01

Full Text Available Abstract Background Health surveys provide important information on the burden and secular trends of risk factors and disease. Several factors including survey and item non-response can affect data quality. There are few reports on efficiency, validity and the impact of item non-response, from developing countries. This report examines factors associated with item non-response and study efficiency in a national health survey in a developing Caribbean island. Methods A national sample of participants aged 15–74 years was selected in a multi-stage sampling design accounting for 4 health regions and 14 parishes using enumeration districts as primary sampling units. Means and proportions of the variables of interest were compared between various categories. Non-response was defined as failure to provide an analyzable response. Linear and logistic regression models accounting for sample design and post-stratification weighting were used to identify independent correlates of recruitment efficiency and item non-response. Results We recruited 2012 15–74 year-olds (66.2% females at a response rate of 87.6% with significant variation between regions (80.9% to 97.6%; p Conclusion Informative health surveys are possible in developing countries. While survey response rates may be satisfactory, item non-response was high in respect of income and sexual practice. In contrast to developed countries, non-response to questions on income is higher and has different correlates. These findings can inform future surveys.

Geochemical drainage surveys for uranium: sampling and analytical methods based on trial surveys in Pennsylvania

International Nuclear Information System (INIS)

Rose, A.W.; Keith, M.L.; Suhr, N.H.

1976-01-01

Geochemical surveys near sandstone-type uranium prospects in northeastern and north-central Pennsylvania show that the deposits can be detected by carefully planned stream sediment surveys, but not by stream water surveys. Stream waters at single sites changed in U content by x10 to 50 during the 18 months of our studies, and even near known prospects, contain less than 0.2 ppB U most of the time. Uranium extractable from stream sediment by acetic acid--H 2 O 2 provides useful contrast between mineralized and nonmineralized drainages of a square mile or less; total U in sediment does not. High organic material results in increased U content of sediments and must be corrected. Changes in U content of sediment with time reach a maximum of x3 and appear to be of short duration. A sediment of about 200 mi 2 near Jim Thorpe detects anomalies extending over several square miles near known occurrences and a second anomaly about two miles northeast of Penn Haven Jct. A similar survey in Lycoming-Sullivan Counties shows anomalous zones near known prospects of the Beaver Lake area and northwest of Muncy Creek. As, Mn, Pb, and V are enriched in the mineralized zones, and perhaps in surrounding halo zones, but do not appear to be pathfinder elements useful for reconnaissance exploration

The acceptability among health researchers and clinicians of social media to translate research evidence to clinical practice: mixed-methods survey and interview study.

Science.gov (United States)

Tunnecliff, Jacqueline; Ilic, Dragan; Morgan, Prue; Keating, Jennifer; Gaida, James E; Clearihan, Lynette; Sadasivan, Sivalal; Davies, David; Ganesh, Shankar; Mohanty, Patitapaban; Weiner, John; Reynolds, John; Maloney, Stephen

2015-05-20

Establishing and promoting connections between health researchers and health professional clinicians may help translate research evidence to clinical practice. Social media may have the capacity to enhance these connections. The aim of this study was to explore health researchers' and clinicians' current use of social media and their beliefs and attitudes towards the use of social media for communicating research evidence. This study used a mixed-methods approach to obtain qualitative and quantitative data. Participation was open to health researchers and clinicians. Data regarding demographic details, current use of social media, and beliefs and attitudes towards the use of social media for professional purposes were obtained through an anonymous Web-based survey. The survey was distributed via email to research centers, educational and clinical institutions, and health professional associations in Australia, India, and Malaysia. Consenting participants were stratified by country and role and selected at random for semistructured telephone interviews to explore themes arising from the survey. A total of 856 participants completed the questionnaire with 125 participants declining to participate, resulting in a response rate of 87.3%. 69 interviews were conducted with participants from Australia, India, and Malaysia. Social media was used for recreation by 89.2% (749/840) of participants and for professional purposes by 80.0% (682/852) of participants. Significant associations were found between frequency of professional social media use and age, gender, country of residence, and graduate status. Over a quarter (26.9%, 229/852) of participants used social media for obtaining research evidence, and 15.0% (128/852) of participants used social media for disseminating research evidence. Most participants (95.9%, 810/845) felt there was a role for social media in disseminating or obtaining research evidence. Over half of the participants (449/842, 53.3%) felt they had a

Libraries in Online Elementary Schools: A Mixed-Methods Study

Science.gov (United States)

Hibbard, Laura; Franklin, Teresa

2015-01-01

School libraries serve an important role; however, elementary students who attend schools online typically do not have a school library. This study followed an online school's inaugural year in instituting a library. A mixed methods approach examined data from focus groups, interviews, surveys, library-use records and oral reading fluency scores.…

Switching to smokeless tobacco as a smoking cessation method: evidence from the 2000 National Health Interview Survey

Directory of Open Access Journals (Sweden)

Phillips Carl V

2008-05-01

Full Text Available Abstract Background Although smokeless tobacco (ST use has played a major role in the low smoking prevalence among Swedish men, there is little information at the population level about ST as a smoking cessation aid in the U.S. Methods We used the 2000 National Health Interview Survey to derive population estimates for the number of smokers who had tried twelve methods in their most recent quit attempt, and for the numbers and proportions who were former or current smokers at the time of the survey. Results An estimated 359,000 men switched to smokeless tobacco in their most recent quit attempt. This method had the highest proportion of successes among those attempting it (73%, representing 261,000 successful quitters (switchers. In comparison, the nicotine patch was used by an estimated 2.9 million men in their most recent quit attempt, and almost one million (35% were former smokers at the time of the survey. Of the 964,000 men using nicotine gum, about 323,000 (34% became former smokers. Of the 98,000 men who used the nicotine inhaler, 27,000 quit successfully (28%. None of the estimated 14,000 men who tried the nicotine nasal spray became former smokers. Forty-two percent of switchers also reported quitting smoking all at once, which was higher than among former smokers who used medications (8–19%. Although 40% of switchers quit smoking less than 5 years before the survey, 21% quit over 20 years earlier. Forty-six percent of switchers were current ST users at the time of the survey. Conclusion Switching to ST compares very favorably with pharmaceutical nicotine as a quit-smoking aid among American men, despite the fact that few smokers know that the switch provides almost all of the health benefits of complete tobacco abstinence. The results of this study show that tobacco harm reduction is a viable cessation option for American smokers.

Methods for environmental change; an exploratory study

Directory of Open Access Journals (Sweden)

Kok Gerjo

2012-11-01

Full Text Available Abstract Background While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change (‘Bundling’ and how within one environmental level, organizations, methods differ when directed at the management (‘At’ or applied by the management (‘From’. Methods The first part of this online survey dealt with examining the ‘bundling’ of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed ‘at’ an organization (for instance, by a health promoter versus ‘from’ within an organization itself. All of the 20 respondents are experts in the field of health promotion. Results Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change. There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Conclusions Taxonomies of theoretical change methods for environmental change should include combinations of individual

Study protocol for the Fukushima health management survey

International Nuclear Information System (INIS)

Yasumura, Seiji; Hosoya, Mitsuaki; Yamashita, Shunichi; Kamiya, Kenji; Abe, Masafumi; Akashi, Makoto; Kodama, Kazunori; Ozasa, Kotaro

2012-01-01

The accidents that occurred at the Fukushima Daiichi Nuclear Power Plant after the Great East Japan Earthquake on 11 March 2011 have resulted in long-term, ongoing anxiety among the residents of Fukushima, Japan. Soon after the disaster, Fukushima Prefecture launched the Fukushima Health Management Survey to investigate long-term low-dose radiation exposure caused by the accident. Fukushima Medical University took the lead in planning and implementing this survey. The primary purposes of this survey are to monitor the long-term health of residents, promote their future well-being, and confirm whether long-term low-dose radiation exposure has health effects. This report describes the rationale and implementation of the Fukushima Health Management Survey. This cohort study enrolled all people living in Fukushima Prefecture after the earthquake and comprises a basic survey and 4 detailed surveys. The basic survey is to estimate levels of external radiation exposure among all 2.05 million residents. It should be noted that internal radiation levels were estimated by Fukushima Prefecture using whole-body counters. The detailed surveys comprise a thyroid ultrasound examination for all Fukushima children aged 18 years or younger, a comprehensive health check for all residents from the evacuation zones, an assessment of mental health and lifestyles of all residents from the evacuation zones, and recording of all pregnancies and births among all women in the prefecture who were pregnant on 11 March. All data have been entered into a database and will be used to support the residents and analyze the health effects of radiation. The low response rate (<30%) to the basic survey complicates the estimation of health effects. There have been no cases of malignancy to date among 38 114 children who received thyroid ultrasound examinations. The importance of mental health care was revealed by the mental health and lifestyle survey and the pregnancy and birth survey. This long

Feasibility of Using a Multilingual Web Survey in Studying the Health of Ethnic Minority Youth

Science.gov (United States)

Malin, Maili; Raisamo, Susanna Ulrika; Lindfors, Pirjo Liisa; Pere, Lasse Antero; Rimpelä, Arja Hannele

2015-01-01

Background Monolingual Web survey is a common tool for studying adolescent health. However, national languages may cause difficulties for some immigrant-origin youths, which lower their participation rate. In national surveys, the number of ethnic minority groups is often too small to assess their well-being. Objective We studied the feasibility of a multilingual Web survey targeted at immigrant-origin youths by selection of response language, and compared participation in different language groups with a monolingual survey. Methods The Adolescent Health and Lifestyle Survey (AHLS), Finland, with national languages (Finnish/Swedish) was modified into a multilingual Web survey targeted at a representative sample of 14- and 16-year olds (N=639) whose registry-based mother tongue was other than the national languages. The survey was conducted in 2010 (16-year olds) and 2011 (14-year olds). The response rate of the multilingual survey in 2011 is compared with the AHLS of 2011. We also describe the translation process and the e-form modification. Results Of the respondents, 57.6% answered in Finnish, whereas the remaining 42.4% used their mother tongue (P=.002). A majority of youth speaking Somali, Middle Eastern, Albanian, and Southeast Asian languages chose Finnish. The overall response rate was 48.7% with some nonsignificant variation between the language groups. The response rate in the multilingual Web survey was higher (51.6%, 163/316) than the survey with national languages (46.5%, 40/86) in the same age group; however, the difference was not significant (P=.47). The adolescents who had lived in Finland for 5 years or less (58.0%, 102/176) had a higher response rate than those having lived in Finland for more than 5 years (45.1%, 209/463; P=.005). Respondents and nonrespondents did not differ according to place of birth (Finland/other) or residential area (capital city area/other). The difference in the response rates of girls and boys was nearly significant (P

Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality

Science.gov (United States)

Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

2018-01-01

Introduction Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. Materials and methods The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. Results The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. Conclusions The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in

Methods for environmental change; an exploratory study.

Science.gov (United States)

Kok, Gerjo; Gottlieb, Nell H; Panne, Robert; Smerecnik, Chris

2012-11-28

While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change ('Bundling') and how within one environmental level, organizations, methods differ when directed at the management ('At') or applied by the management ('From'). The first part of this online survey dealt with examining the 'bundling' of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed 'at' an organization (for instance, by a health promoter) versus 'from' within an organization itself. All of the 20 respondents are experts in the field of health promotion. Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change.There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Taxonomies of theoretical change methods for environmental change should include combinations of individual level methods that may be bundled and separate suggestions for methods targeting a level

Fiscal 1997 report on the verification survey of geothermal exploration technology. 2. Development of the reservoir variation survey method (development of the gravity survey method); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (juryoku tansaho kaihatsu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Among technology developments such as the reservoir evaluation at initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the development of the gravity survey method. The paper conducted the installation of gravity measuring points outside the existing monitoring range, introduction of CG-3M gravimeter/GPS measuring system, drilling of ground water level monitoring well, etc. for the setup of a system for new gravity monitoring. Moreover, regular measurement of gravity was made for the first fiscal year, and at the same time the continued observation of ground water level, precipitation, atmospheric pressure, and temperature was started. It is necessary to study the effects on gravity variation such as gravity gradient and tidal correction. Conducted were collection/arrangement of the existing data and database construction for history matching/variation prediction in the Yanaizu Nishiyama area. The paper made surveys of the trends/literature. In the future, needed are the computation using density models of geothermal reservoirs and test use of EDCON`s downhole gravimeter. 44 refs., 30 figs., 17 tabs.

Carcinoma of the cervix: patterns of care studies: review of 1978, 1983, and 1988-1989 surveys

International Nuclear Information System (INIS)

Montana, Gustavo S.; Hanlon, A. L.; Brickner, T. J.; Owen, J. B.; Hanks, G. E.; Ling, C. C.; Komaki, R.; Marcial, V. A.; Lanciano, R.; Thomas, G. M.

1995-01-01

Purpose: A review of the Patterns of Care Studies Process Survey data on carcinoma of the cervix conducted on patients in 1978, 1983, and 1988-89 was carried out to identify changes or trends in the demographics, evaluation, and treatment that might have occurred over this time period. Methods and Materials: Patterns of Care Studies conducted surveys on patients treated by radiation therapy for cervical carcinoma in 1978, 1983, and 1988-89. These surveys have compiled demographic and treatment data on a total of 993 patients. There is outcome data for the 1978 and 1983 surveys, but not for the 1988-89 survey because follow-up has not been collected yet. The demographic and treatment delivery data on all three surveys has been reviewed and analyzed and is the subject of this study. Results: There was no difference in the age distribution at the time of diagnosis of the patients in these surveys. The percentage of black patients remained constant in the three surveys, 19%, 17%, and 21%, respectively. The percentage of white patients was 76%, 78%, and 67%, but that of nonwhite/nonblack patients was 3%, 4%, and 12% (p 60 Co units decreased from 35 to 2% from the first to the third survey [6 to 0% for short source-surface distance (SSD) 60 Co units]. Point dose calculations for the intracavitary therapy increased from 78% in the 1978 survey to 95% in the third survey. As determined by the total dose delivered to the paracentral points, more patients (75.1%) were treated according to the Patterns of Care recommended guidelines in the 1988-89 survey than in the 1983 survey (63.6%). Chemotherapy was given to 12% of the patients undergoing radiation therapy during the period of the third survey, but these data are not available for the first and second surveys. Conclusion: Review of the Carcinoma of the Cervix Patterns of Care studies discloses significant changes in the demographics, patient evaluation, and radiation therapy techniques during the period of the studies. The

How accurate is our misinformation? A randomized comparison of four survey interview methods to measure risk behavior among young adults in the Dominican Republic

Directory of Open Access Journals (Sweden)

Sigrid Vivo

Full Text Available Objective: To identify the most effective survey interview method for measuring risk behavior among young adults in the Dominican Republic. Methods: 1200 young adults were randomized to one of four different survey interview methods: two interviewer-assisted methods [face-to-face interview (FTFI, and computer-assisted telephone interview (CATI], and two self-administered methods [self-administered interview (SAI, and audio computer-assisted, self-administered interview (ACASI]. Youth were asked about a wide range of youth-specific risk behaviors, including violence, substance use, as well as sexual and reproductive health. Quality of data collected was examined by looking at how the survey was administered, including identifying two sources of errors that typically threaten data quality11 This study assumes that bias does not change with sample size. In order to increase the sample size, the data collection period was extended, leaving everything else unchanged. It is, therefore, assumed that the decreasing effects of the learning curve are negligible.: (i errors at the individual level with regards to survey methodology performance and cognitive difficulties [measured with the Response Consistency Index (RCI]; and (ii errors at the aggregate level (how desirability bias, interviewer gender, and interview privacy settings affect responses. Results: No statistically significant differences in participant non-response rates were found at the individual level across all survey interview methods. At the individual question level, self-completion methods generated higher non-response and error rates than assisted methods. The SAI method showed the poorest performance of all four methods in terms of non-response rate (1.6%22 Percentage of data with non-response values at the question level. and RCI (83.0%.At the aggregate level, the prevalence of several key risk indicators was statistically significant between methods. Using means-adjustment for

Investigation of background acoustical effect on online surveys: A case study of a farmers' market customer survey

Science.gov (United States)

Tang, Xingdi

Since the middle of 1990s, internet has become a new platform for surveys. Previous studies have discussed the visual design features of internet surveys. However, the application of acoustics as a design characteristic of online surveys has been rarely investigated. The present study aimed to fill that research gap. The purpose of the study was to assess the impact of background sound on respondents' engagement and satisfaction with online surveys. Two forms of background sound were evaluated; audio recorded in studios and audio edited with convolution reverb technique. The author recruited 80 undergraduate students for the experiment. These students were assigned to one of three groups. Each of the three groups was asked to evaluate their engagement and satisfaction with a specific online survey. The content of the online survey was the same. However, the three groups was exposed to the online survey with no background sound, with background sound recorded in studios; and with background sound edited with convolution reverb technique. The results showed no significant difference in engagement and satisfaction in the three groups of online surveys; without background sound, background sound recorded in studios, and background sound edited with convolution reverb technique. The author suggests that background sound does not contribute to online surveys in all the contexts. The industry practitioners should be careful to evaluate the survey context to decide whether the background sound should be added. Particularly, ear-piercing noise or acoustics which may link to respondents' unpleasant experience should be avoided. Moreover, although the results did not support the advantage of the revolution reverb technique in improving respondents' engagement and satisfaction, the author suggests that the potential of the revolution reverb technique in the applications of online surveys can't be totally denied, since it may be useful for some contexts which need further

Quality of reporting web-based and non-web-based survey studies: What authors, reviewers and consumers should consider.

Science.gov (United States)

Turk, Tarek; Elhady, Mohamed Tamer; Rashed, Sherwet; Abdelkhalek, Mariam; Nasef, Somia Ahmed; Khallaf, Ashraf Mohamed; Mohammed, Abdelrahman Tarek; Attia, Andrew Wassef; Adhikari, Purushottam; Amin, Mohamed Alsabbahi; Hirayama, Kenji; Huy, Nguyen Tien

2018-01-01

Several influential aspects of survey research have been under-investigated and there is a lack of guidance on reporting survey studies, especially web-based projects. In this review, we aim to investigate the reporting practices and quality of both web- and non-web-based survey studies to enhance the quality of reporting medical evidence that is derived from survey studies and to maximize the efficiency of its consumption. Reporting practices and quality of 100 random web- and 100 random non-web-based articles published from 2004 to 2016 were assessed using the SUrvey Reporting GuidelinE (SURGE). The CHERRIES guideline was also used to assess the reporting quality of Web-based studies. Our results revealed a potential gap in the reporting of many necessary checklist items in both web-based and non-web-based survey studies including development, description and testing of the questionnaire, the advertisement and administration of the questionnaire, sample representativeness and response rates, incentives, informed consent, and methods of statistical analysis. Our findings confirm the presence of major discrepancies in reporting results of survey-based studies. This can be attributed to the lack of availability of updated universal checklists for quality of reporting standards. We have summarized our findings in a table that may serve as a roadmap for future guidelines and checklists, which will hopefully include all types and all aspects of survey research.

Methods used to conduct the pan-European Union survey on consumer attitudes to physical activity, body weight and health.

Science.gov (United States)

Kearney, J M; Kearney, M J; McElhone, S; Gibney, M J

1999-03-01

The purpose of conducting this survey was to identify data on consumer attitudes towards and beliefs about physical activity, body weight and health among the 15 countries of the EU. A cross-sectional study to get a picture of the attitudes to physical activity, body weight and health in the EU. For this, it was considered important that samples be nationally representative so that inferences drawn from the data could be applied to the population in each country as well as to the EU population as a whole. Using a non-probability sampling method employing quota controls (and the national weight) we obtained large sample sizes from each country which were nationally representative in terms of the variables age, sex and regional distribution. To ensure samples were truly nationally representative a national weight was used when analysing the data using the same characteristics as those used to define quotas. When examining pooled estimates for the total EU sample a population weight was applied. In total, 15,239 subjects aged 15 years and upwards in the EU completed the survey. This article gives details on the methods used in carrying out the survey from design of the questionnaire to sample selection, questionnaire administration and analysis of the data. The methods and their limitations are discussed.

The Canadian Human Activity Pattern Survey: report of methods and population surveyed.

Science.gov (United States)

Leech, J A; Wilby, K; McMullen, E; Laporte, K

1996-01-01

The assessment of health risk due to environmental contaminants depends upon accurate estimates of the distribution of population exposures. Exposure assessment, in turn, requires information on the time people spend in micro-environments and their activities during periods of exposure. This paper describes preliminary results including study methodology and population sampled in a large Canadian survey of time-activity patterns. A 24-hour diary recall survey was performed in 2381 households (representing a 65% response rate) to describe in detail the timing, location and activity pattern of one household member (the adult or child with the next birthday). Four cities (Toronto, Vancouver, Edmonton and Saint John, NB) and their suburbs were sampled by random-digit dialling over a nine-month period in 1994/1995. Supplemental questionnaires inquiring about sociodemographic information, house and household characteristics and potential exposure to toxins in the air and water were also administered. In general, the results show that respondents spend the majority of their time indoors (88.6%) with smaller proportions of time outdoors (6.1%) and in vehicles (5.3%). Children under the age of 12 spend more time both indoors and outdoors and less time in transit than do adults. The data from this study will be used to define more accurately the exposure of Canadians to a variety of toxins in exposure assessment models and to improve upon the accuracy of risk assessment for a variety of acute and chronic health effects known or suspected to be related to environmental exposures.

Offshore observations of eastern red bats (Lasiurus borealis in the Mid-Atlantic United States using multiple survey methods.

Directory of Open Access Journals (Sweden)

Shaylyn K Hatch

Full Text Available Little is known about the migration and movements of migratory tree-roosting bat species in North America, though anecdotal observations of migrating bats over the Atlantic Ocean have been reported since at least the 1890s. Aerial surveys and boat-based surveys of wildlife off the Atlantic Seaboard detected a possible diurnal migration event of eastern red bats (Lasiurus borealis in September 2012. One bat was sighted approximately 44 km east of Rehoboth Beach, Delaware during a boat-based survey. Eleven additional bats were observed between 16.9 and 41.8 km east of New Jersey, Delaware, and Virginia in high definition video footage collected during digital aerial surveys. Observations were collected incidentally as part of a large baseline study of seabird, marine mammal, and sea turtle distributions and movements in the offshore environment. Digital survey methods also allowed for altitude estimation for several of these bats at >100 m above sea level. These observations provide new evidence of bat movements offshore, and offer insight into their flight heights above sea level and the times of day at which such migrations may occur.

Methods of surveying and monitoring marine radioactivity. Report of an ad hoc panel of experts

International Nuclear Information System (INIS)

1965-01-01

An effective control of the radioactive pollution of the sea depends partly on the availability of adequate technical methods for surveying and monitoring the sea and marine products with regard to the presence of radioactive substances. The purpose of this manual is to offer such methods.

Assessing the search for information on Three Rs methods, and their subsequent implementation: a national survey among scientists in the Netherlands.

Science.gov (United States)

van Luijk, Judith; Cuijpers, Yvonne; van der Vaart, Lilian; Leenaars, Marlies; Ritskes-Hoitinga, Merel

2011-10-01

A local survey conducted among scientists into the current practice of searching for information on Three Rs (i.e. Replacement, Reduction and Refinement) methods has highlighted the gap between the statutory requirement to apply Three Rs methods and the lack of criteria to search for them. To verify these findings on a national level, we conducted a survey among scientists throughout The Netherlands. Due to the low response rate, the results give an impression of opinions, rather than being representative of The Netherlands as a whole. The findings of both surveys complement each other, and indicate that there is room for improvement. Scientists perceive searching the literature for information on Three Rs methods to be a difficult task, and specific Three Rs search skills and knowledge of Three Rs databases are limited. Rather than using a literature search, many researchers obtain information on these methods through personal communication, which means that published information on possible Three Rs methods often remains unfound and unused. A solution might be to move beyond the direct search for information on Three Rs methods and choose another approach. One approach that seems rather appropriate is that of systematic review. This provides insight into the necessity for any new animal studies, as well as optimal implementation of available data and the prevention of unnecessary animal use in the future. 2011 FRAME.

Assessment of distribution and abundance estimates for Mariana swiftlets (Aerodramus bartschi) via examination of survey methods

Science.gov (United States)

Johnson, Nathan C.; Haig, Susan M.; Mosher, Stephen M.

2018-01-01

We described past and present distribution and abundance data to evaluate the status of the endangered Mariana Swiftlet (Aerodramus bartschi), a little-known echolocating cave swiftlet that currently inhabits 3 of 5 formerly occupied islands in the Mariana archipelago. We then evaluated the survey methods used to attain these estimates via fieldwork carried out on an introduced population of Mariana Swiftlets on the island of O'ahu, Hawaiian Islands, to derive better methods for future surveys. We estimate the range-wide population of Mariana Swiftlets to be 5,704 individuals occurring in 15 caves on Saipan, Aguiguan, and Guam in the Marianas; and 142 individuals occupying one tunnel on O'ahu. We further confirm that swiftlets have been extirpated from Rota and Tinian and have declined on Aguiguan. Swiftlets have remained relatively stable on Guam and Saipan in recent years. Our assessment of survey methods used for Mariana Swiftlets suggests overestimates depending on the technique used. We suggest the use of night vision technology and other changes to more accurately reflect their distribution, abundance, and status.

Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR

Directory of Open Access Journals (Sweden)

Bochaton Audrey

2007-06-01

Full Text Available Abstract Background Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. Methods We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. Application We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. Conclusion This paper describes the conceptual reasoning behind

Practical Bias Correction in Aerial Surveys of Large Mammals: Validation of Hybrid Double-Observer with Sightability Method against Known Abundance of Feral Horse (Equus caballus) Populations.

Science.gov (United States)

Lubow, Bruce C; Ransom, Jason I

2016-01-01

Reliably estimating wildlife abundance is fundamental to effective management. Aerial surveys are one of the only spatially robust tools for estimating large mammal populations, but statistical sampling methods are required to address detection biases that affect accuracy and precision of the estimates. Although various methods for correcting aerial survey bias are employed on large mammal species around the world, these have rarely been rigorously validated. Several populations of feral horses (Equus caballus) in the western United States have been intensively studied, resulting in identification of all unique individuals. This provided a rare opportunity to test aerial survey bias correction on populations of known abundance. We hypothesized that a hybrid method combining simultaneous double-observer and sightability bias correction techniques would accurately estimate abundance. We validated this integrated technique on populations of known size and also on a pair of surveys before and after a known number was removed. Our analysis identified several covariates across the surveys that explained and corrected biases in the estimates. All six tests on known populations produced estimates with deviations from the known value ranging from -8.5% to +13.7% and corrected by our statistical models. Our results validate the hybrid method, highlight its potentially broad applicability, identify some limitations, and provide insight and guidance for improving survey designs.

Prospective evaluation of direct approach with a tablet device as a strategy to enhance survey study participant response rate

Directory of Open Access Journals (Sweden)

Parker Melissa J

2012-10-01

Full Text Available Abstract Background Investigators conduct survey studies for a variety of reasons. Poor participant response rates are common, however, and may limit the generalizability and utility of results. The objective of this study was to determine whether direct approach with a tablet device enhances survey study participant response rate and to assess participants’ experiences with this mode of survey administration. Findings An interventional study nested within a single center survey study was conducted at McMaster Children’s Hospital. The primary outcome was the ability to achieve of a survey study response rate of 70% or greater. Eligible participants received 3 email invitations (Week 0, 2, 4 to complete a web-based (Survey Monkey survey. The study protocol included plans for a two-week follow-up phase (Phase 2 where non-responders were approached by a research assistant and invited to complete an iPad-based version of the survey. The Phase 1 response rate was 48.7% (56/115. Phase 2 effectively recruited reluctant responders, increasing the overall response rate to 72.2% (83/115. On a 7-point Likert scale, reluctant responders highly rated their enjoyment (mean 6.0, sd 0.83 [95% CI: 5.7-6.3] and ease of use (mean 6.7, sd 0.47 [95% CI: 6.5-6.9] completing the survey using the iPad. Reasons endorsed for Phase 2 participation included: direct approach (81%, immediate survey access (62%, and the novelty of completing a tablet-based survey (54%. Most reluctant responders (89% indicated that a tablet-based survey is their preferred method of survey completion. Conclusions Use of a tablet-based version of the survey was effective in recruiting reluctant responders and this group reported positive experiences with this mode of survey administration.

Position fixing and surveying techniques for marine archaeological studies

Digital Repository Service at National Institute of Oceanography (India)

Ganesan, P.

. This technical report is going to be of great help to marine archaeologists, who wants to know the capabilities of some of the most common available tools for position fixing, their accuracies and method of surveying, which in turn will help in selecting...

Geostatistical methods for rock mass quality prediction using borehole and geophysical survey data

Science.gov (United States)

Chen, J.; Rubin, Y.; Sege, J. E.; Li, X.; Hehua, Z.

2015-12-01

For long, deep tunnels, the number of geotechnical borehole investigations during the preconstruction stage is generally limited. Yet tunnels are often constructed in geological structures with complex geometries, and in which the rock mass is fragmented from past structural deformations. Tunnel Geology Prediction (TGP) is a geophysical technique widely used during tunnel construction in China to ensure safety during construction and to prevent geological disasters. In this paper, geostatistical techniques were applied in order to integrate seismic velocity from TGP and borehole information into spatial predictions of RMR (Rock Mass Rating) in unexcavated areas. This approach is intended to apply conditional probability methods to transform seismic velocities to directly observed RMR values. The initial spatial distribution of RMR, inferred from the boreholes, was updated by including geophysical survey data in a co-kriging approach. The method applied to a real tunnel project shows significant improvements in rock mass quality predictions after including geophysical survey data, leading to better decision-making for construction safety design.

Study on team evaluation (4). Reliability and validity of questionnaire survey-based team work evaluation method of power plant operator team

International Nuclear Information System (INIS)

Sasou, Kunihide; Hirose, Ayako; Misawa, Ryou; Yamaguchi, Hiroyuki

2006-01-01

The series of this study describes the necessity of the evaluation of team work from two aspects of operator's behavior and operators' mind. The authors propose Team Work Element Model which consists of necessary elements to build high performance team. This report discusses a method to evaluate team work from the second aspect, that is, competency trust, competition, for-the team spirit, etc. The authors survey the previous studies on psychological measures and organize a set of questions to evaluate 10 team work sub elements that are the parts of Team Work Element Model. The factor analysis shows that this set of questions is consists of 13 factors such as task-oriented leadership, harmony-oriented team atmosphere, etc. Close examination of the questions in each factor shows that 8 of 10 team work sub elements can be evaluated by this questionnaire. In addition, this questionnaire comprises scales additional 8 scales such as job satisfaction, leadership, etc. As a result, it is possible to evaluate team work from more comprehensive view points. (author)

Survey of methods used to determine if a patient has a deep vein thrombosis: An exploratory research report.

Science.gov (United States)

Heick, John D; Farris, James W

2017-09-01

The use of evidence-based practice (EBP) is encouraged in the physical therapy profession, but integrating evidence into practice can be difficult for clinicians because of lack of time and other constraints. To survey physical therapy clinical instructors and determine the methods they use for screening for deep vein thrombosis (DVT), a type of venous thromboembolism (VTE) in the lower extremities. Exploratory survey. Twelve survey questions written specifically for this study were sent to a convenience sample of clinical instructors associated with seven universities across 43 states. Eight hundred fifty clinical instructors (22.4% response rate) completed the survey. Of those who responded, 80.5% were taught to use Homans sign to screen for a possible DVT in their entry-level education and 67.9% continued to use Homans sign in clinical practice. Regardless of post-graduate education, respondents were more likely to choose Homans sign than a clinical decision rule (CDR) to screen for a suspected DVT. Additionally, nearly two-thirds of respondents failed to correctly identify one or more of the major risk factors for developing a DVT/VTE. The response rate was 22.4% and therefore may not fully represent the population of physical therapy clinical instructors in the United States. Results from this exploratory survey indicated that approximately two-thirds of physical therapy clinical instructors used outdated DVT/VTE screening methods that they were taught in their entry-level education and nearly two-thirds did not identify the major risk factors associated with DVT/VTE. These results suggest that change is necessary in physical therapy education, clinical practice, and continuing professional development to ensure a more evidenced-based identification of DVT and VTE.

Automatic surveying techniques

International Nuclear Information System (INIS)

Sah, R.

1976-01-01

In order to investigate the feasibility of automatic surveying methods in a more systematic manner, the PEP organization signed a contract in late 1975 for TRW Systems Group to undertake a feasibility study. The completion of this study resulted in TRW Report 6452.10-75-101, dated December 29, 1975, which was largely devoted to an analysis of a survey system based on an Inertial Navigation System. This PEP note is a review and, in some instances, an extension of that TRW report. A second survey system which employed an ''Image Processing System'' was also considered by TRW, and it will be reviewed in the last section of this note. 5 refs., 5 figs., 3 tabs

International survey of methods used in health technology assessment (HTA: does practice meet the principles proposed for good research?

Directory of Open Access Journals (Sweden)

Stephens JM

2012-08-01

Full Text Available Jennifer M Stephens,1 Bonnie Handke,2 Jalpa A Doshi3 On behalf of the HTA Principles Working Group, part of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR HTA Special Interest Group (SIG1Pharmerit International, Bethesda, MD, USA; 2Medtronic Neuromodulation, Minneapolis, MN, USA; 3Center for Evidence-Based Practice and Center for Health Incentives and Behavioral Economics, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USAObjective: To describe research methods used internationally in health technology assessment (HTA and health-care reimbursement policies; compare the survey findings on research methods and processes to published HTA principles; and discuss important issues/trends reported by HTA bodies related to current research methods and applications of the HTA process.Methods: Representatives from HTA bodies worldwide were recruited to complete an online survey consisting of 47 items within four topics: (1 organizational information and process, (2 primary HTA methodologies and importance of attributes, (3 HTA application and dissemination, and (4 quality of HTA, including key issues. Results were presented as a comparison of current HTA practices and research methods to published HTA principles.Results: The survey was completed by 30 respondents representing 16 countries in five major regions, Australia (n = 3, Canada (n = 2, Europe (n = 17, Latin America (n = 2, and the United States (n = 6. The most common methodologies used were systematic review, meta-analysis, and economic modeling. The most common attributes evaluated were effectiveness (more commonly than efficacy, cost-effectiveness, safety, and quality of life. The attributes assessed, relative importance of the attributes, and conformance with HTA principles varied by region/country. Key issues and trends facing HTA bodies included standardizing methods for economic evaluations and grading of evidence, lack of evidence

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

Science.gov (United States)

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

Science.gov (United States)

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

Science.gov (United States)

Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

2016-01-01

Objective To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. Methods We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. Results MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%–95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. Conclusions National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. PMID:26965869

Enhancing Field Research Methods with Mobile Survey Technology

Science.gov (United States)

Glass, Michael R.

2015-01-01

This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

Web-based surveys as an alternative to traditional mail methods.

Science.gov (United States)

Fleming, Christopher M; Bowden, Mark

2009-01-01

Environmental economists have long used surveys to gather information about people's preferences. A recent innovation in survey methodology has been the advent of web-based surveys. While the Internet appears to offer a promising alternative to conventional survey administration modes, concerns exist over potential sampling biases associated with web-based surveys and the effect these may have on valuation estimates. This paper compares results obtained from a travel cost questionnaire of visitors to Fraser Island, Australia, that was conducted using two alternate survey administration modes; conventional mail and web-based. It is found that response rates and the socio-demographic make-up of respondents to the two survey modes are not statistically different. Moreover, both modes yield similar consumer surplus estimates.

Wiki Surveys: Open and Quantifiable Social Data Collection

Science.gov (United States)

Salganik, Matthew J.; Levy, Karen E. C.

2015-01-01

In the social sciences, there is a longstanding tension between data collection methods that facilitate quantification and those that are open to unanticipated information. Advances in technology now enable new, hybrid methods that combine some of the benefits of both approaches. Drawing inspiration from online information aggregation systems like Wikipedia and from traditional survey research, we propose a new class of research instruments called wiki surveys. Just as Wikipedia evolves over time based on contributions from participants, we envision an evolving survey driven by contributions from respondents. We develop three general principles that underlie wiki surveys: they should be greedy, collaborative, and adaptive. Building on these principles, we develop methods for data collection and data analysis for one type of wiki survey, a pairwise wiki survey. Using two proof-of-concept case studies involving our free and open-source website www.allourideas.org, we show that pairwise wiki surveys can yield insights that would be difficult to obtain with other methods. PMID:25992565

Wiki surveys: open and quantifiable social data collection.

Science.gov (United States)

Salganik, Matthew J; Levy, Karen E C

2015-01-01

In the social sciences, there is a longstanding tension between data collection methods that facilitate quantification and those that are open to unanticipated information. Advances in technology now enable new, hybrid methods that combine some of the benefits of both approaches. Drawing inspiration from online information aggregation systems like Wikipedia and from traditional survey research, we propose a new class of research instruments called wiki surveys. Just as Wikipedia evolves over time based on contributions from participants, we envision an evolving survey driven by contributions from respondents. We develop three general principles that underlie wiki surveys: they should be greedy, collaborative, and adaptive. Building on these principles, we develop methods for data collection and data analysis for one type of wiki survey, a pairwise wiki survey. Using two proof-of-concept case studies involving our free and open-source website www.allourideas.org, we show that pairwise wiki surveys can yield insights that would be difficult to obtain with other methods.

Technical errors in complete mouth radiographic survey according to radiographic techniques and film holding methods

International Nuclear Information System (INIS)

Choi, Karp Sik; Byun, Chong Soo; Choi, Soon Chul

1986-01-01

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group I: Bisecting-angle technique with patient's fingers. Group II: Bisecting-angle technique with Rinn Snap-A-Ray device. Group III: Bisecting-angle technique with Rinn XCP instrument (short cone) Group IV: Bisecting-angle technique with Rinn XCP instrument (long cone). The most frequent cases of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group I: Incorrect film placement (47.8), upper canine region, and 0.89. Group II: Incorrect film placement (44.0), upper canine region, and 1.12. Group III: Incorrect film placement (79.2), upper canine region, and 2.05. Group IV: Incorrect film placement (67.7), upper canine region, and 1.69.

Attitudes of nursing staff towards involvement in medical end-of-life decisions: a national survey study.

NARCIS (Netherlands)

Albers, G.; Francke, A.L.; Veer, A.J.E. de; Bilsen, J.; Onwuteaka-Philipsen, B.D.

2014-01-01

Objectives: To investigate nursing staff attitudes towards involvement and role in end-of-life decisions (ELD) and the relationships with sociodemographic and work-related characteristics. Methods: Survey study among nationally representative Dutch research sample consisting of care professionals.

Attitudes of nursing staff towards involvement in medical end-of-life decisions: A national survey study

NARCIS (Netherlands)

Albers, G.; Francke, A.L.; de Veer, A.J.E.; Bilsen, J.; Onwuteaka-Philipsen, B.D.

2014-01-01

Objectives: To investigate nursing staff attitudes towards involvement and role in end-of-life decisions (ELDs) and the relationships with sociodemographic and work-related characteristics. Methods: Survey study among nationally representative Dutch research sample consisting of care professionals.

Results of a survey on accident and safety analysis codes, benchmarks, verification and validation methods

International Nuclear Information System (INIS)

Lee, A.G.; Wilkin, G.B.

1996-03-01

During the 'Workshop on R and D needs' at the 3rd Meeting of the International Group on Research Reactors (IGORR-III), the participants agreed that it would be useful to compile a survey of the computer codes and nuclear data libraries used in accident and safety analyses for research reactors and the methods various organizations use to verify and validate their codes and libraries. Five organizations, Atomic Energy of Canada Limited (AECL, Canada), China Institute of Atomic Energy (CIAE, People's Republic of China), Japan Atomic Energy Research Institute (JAERI, Japan), Oak Ridge National Laboratories (ORNL, USA), and Siemens (Germany) responded to the survey. The results of the survey are compiled in this report. (author) 36 refs., 3 tabs

ILearning and EHomeStudy: Multimedia Training and Assessments for Field Survey Staff

Directory of Open Access Journals (Sweden)

Charles Loftis

2008-04-01

Full Text Available Survey data collection projects strive to collect high quality data from survey respondents. The quality of the data collected is greatly dependent upon the effectiveness of field interviewers (FIs to conduct inperson screenings and interviews. Training FIs and subsequently assessing their knowledge of project protocol, methods and interviewing techniques is critical to the overall success of any data collection effort. For large surveys, as the number of FIs increase, the cost of inperson training can become prohibitively large. As a cost effective solution to increase the quality of the field data, we developed a suite of web and media based training and assessment tools called iLearning and eHomeStudy for training field staff. Besides saving the project costs associated with inperson training, we are also able to provide refresher trainings throughout the year. This application also enables FIs to view standardized training courses at their convenience and at their own pace. This paper describes the technical details, key features and benefits of this application suite, and also it includes some details on user satisfaction and future directions.

The expert's guide to mealtime interventions - A Delphi method survey.

Science.gov (United States)

Conchin, Simone; Carey, Sharon

2017-09-27

Prevalence of malnutrition and a myriad of barriers to adequate oral diet in hospitalised patients warrants further investment to improve the patient mealtime experience. The aim of this study was to explore barriers and enablers to implementing effective mealtime interventions and develop a process framework to guide clinicians and researchers in the area. Potential experts in the area of hospital mealtime intervention were identified as having published in this field of work within the Australasian setting. Further information was sought by email and telephone communication on professional background; research experience; interest; and capacity to participate. Recruited participants were surveyed using a modified Delphi method to establish opinion and experience in the area of mealtime interventions. Results were collated and content was coded using a thematic analysis approach by the primary researcher and two additional reviewers. Thirty-two Australian authors in the area of mealtime interventions within the hospital environment were identified from publication. Twenty-one participants were able to be contacted and nineteen of these consented to enrol in the study. Participants included those from a dietetic (n = 14), nursing (n = 4) and medical (n = 1) background. Participants were deemed to have expert knowledge if they had significant involvement in the published research and demonstrated a deep level of understanding of hospital mealtime interventions. All participants provided key insights into barriers to oral intake in the hospital environment and suggestions for interventions to address these barriers. From the survey, an eight step framework to guide mealtime interventions was developed. Hospital mealtime interventions are complex processes. Interventions should be implemented after careful consideration of the local context and baseline data; and tailored to address barriers. Roles and responsibilities for nutrition care should be clear and

Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR).

Science.gov (United States)

Vallée, Julie; Souris, Marc; Fournet, Florence; Bochaton, Audrey; Mobillion, Virginie; Peyronnie, Karine; Salem, Gérard

2007-06-01

Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. This paper describes the conceptual reasoning behind the construction of the survey sample and shows that it can be

A Method for Recruiting Participants from Isolated Islands of Small Island Developing States (SIDS) for Survey Research

Science.gov (United States)

Moosa, Sheena; Koopman-Boyden, Peggy

2016-01-01

Representing isolated small island communities through social survey research continues to be challenging. We examine a locally developed method to reach and recruit older people (65+ years) for a survey on well-being in the small island developing state of Maldives. The use of messengers to recruit participants is examined in the context of these…

Pilot study for natural radiation survey

International Nuclear Information System (INIS)

Brown, L.; Driscoll, C.M.H.; Green, B.M.R.; Miles, J.C.H.

1983-01-01

NRPB's national survey of natural radiation exposure in homes commenced in 1982 and will run until 1984. A pilot survey was undertaken in over 100 homes for one year, using passive thermoluminescent dosemeters to measure external radiation from terrestrial and cosmic sources and passive radon dosemeters to measure the radon-222 gas concentration. A preliminary analysis of the results obtained from the pilot survey is given. The main value of the pilot survey was in providing experience and various administrative and scientific procedures have been simplified or automated for the national survey. (U.K.)

Survey indicated that core outcome set development is increasingly including patients, being conducted internationally and using Delphi surveys.

Science.gov (United States)

Biggane, Alice M; Brading, Lucy; Ravaud, Philippe; Young, Bridget; Williamson, Paula R

2018-02-17

There are numerous challenges in including patients in a core outcome set (COS) study, these can vary depending on the patient group. This study describes current efforts to include patients in the development of COS, with the aim of identifying areas for further improvement and study. Using the COMET database, corresponding authors of COS projects registered or published from 1 January 2013 to 2 February 2017 were invited via a personalised email to participate in a short online survey. The survey and emails were constructed to maximise the response rate by following the academic literature on enhancing survey responses. Personalised reminder emails were sent to non-responders. This survey explored the frequency of patient input in COS studies, who was involved, what methods were used and whether or not the COS development was international. One hundred and ninety-two COS developers were sent the survey. Responses were collected from 21 February 2017 until 7 May 2017. One hundred and forty-six unique developers responded, yielding a 76% response rate and data in relation to 195 unique COSs (as some developers had worked on multiple COSs). Of focus here are their responses regarding 162 COSs at the published, completed or ongoing stages of development. Inclusion of patient participants was indicated in 87% (141/162) of COSs in the published completed or ongoing stages and over 94% (65/69) of ongoing COS projects. Nearly half (65/135) of COSs included patient participants from two or more countries and 22% (30/135) included patient participants from five or more countries. The Delphi survey was reported as being used singularly or in combination with other methods in 85% (119/140) of projects. Almost a quarter (16/65) of ongoing studies reported using a combination of qualitative interviews, Delphi survey and consensus meeting. These findings indicated that the Delphi survey is the most popular method of facilitating patient participation, while the combination of

Methods for solving reasoning problems in abstract argumentation – A survey

Science.gov (United States)

Charwat, Günther; Dvořák, Wolfgang; Gaggl, Sarah A.; Wallner, Johannes P.; Woltran, Stefan

2015-01-01

Within the last decade, abstract argumentation has emerged as a central field in Artificial Intelligence. Besides providing a core formalism for many advanced argumentation systems, abstract argumentation has also served to capture several non-monotonic logics and other AI related principles. Although the idea of abstract argumentation is appealingly simple, several reasoning problems in this formalism exhibit high computational complexity. This calls for advanced techniques when it comes to implementation issues, a challenge which has been recently faced from different angles. In this survey, we give an overview on different methods for solving reasoning problems in abstract argumentation and compare their particular features. Moreover, we highlight available state-of-the-art systems for abstract argumentation, which put these methods to practice. PMID:25737590

Report on the survey of geothermal development at Okushiri Island, Hokkaido. Geochemical survey (GC/MS and MS method); Hokkaido Okushiritou chinetsu kaihatsu chosa chikagaku chosa (GC/MS and MS ho) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-09-01

To elucidate chemical components of soil gas in the Okushiri Island area, soil gas was collected by the method using charcoal adsorbent, and analysis was made by the GC/MS method. Out of the 19 measuring points, 17 points were set up near the measuring points in the FY 1998 survey by the finger print method. At the same measuring points, analytical survey by the MS method was also conducted to sort the type of soil gas. As a result of the GC/MS analysis, xylene or ethyl benzene was detected at 12 measuring points of all 19 measuring points, and from the distribution, it was predicted that there were anomaly zones in the district along the road of the Okushiri Island line and the district southward from the 5.8K Pass. These results were in harmony with the results of the survey by the finger print method. As to the sorting of soil gas based on the results of the MS analysis, the results were different at 8 measuring points from those of the survey by the finger print method in FY 1998. It was considered that the cause was the accidental vaporization of a large quantity of acetaldehyde, and acetaldehyde was regarded as a noise gas component that does not reflect the geothermal structure. (NEDO)

A new survey method of tsunami inundation area using chemical analysis of soil. Application to the field survey on the 2010 Chilean tsunami at Chile

International Nuclear Information System (INIS)

Yoshii, Takumi; Matsuyama, Masafumi; Koshimura, Shunichi; Mas, Erick; Matsuoka, Masashi; Jimenez, Cesar

2011-01-01

The severe earthquake of Mw 8.8 occurred on 27 Feb. 2010 at the center of Chile. The tsunami generated by the earthquake attacked the coast of Chile and it propagated to the Pacific Ocean coastline. The field survey on the disaster damages due to the tsunami was conducted near Talcahuano in Chile to prepare for the great tsunamis accompanied by the earthquakes predicted to occur near Japan within several decades. The aims of this field survey were to survey disaster damages especially relevant to electric equipments and to develop the survey method based on a chemical analysis of the inundated soil which supplies objective data with high accuracy compared to the conventional methods. In the survey area, the average of inundation heights was 6 m, however it locally reached up to 25 m. The maximum sea-level height of the series of the tsunamis was recorded in the third or fourth wave (roughly 3 hours after the earthquake occurrence). The first floors of houses were severely destroyed and some ships were carried and left on land by the tsunamis. Furthermore, the large amount of sediment was deposited in towns. Removing the drifted ships and tsunami deposit is important consideration for quick recovery from a disaster due to a tsunami. The soil samples were obtained from both the inundated and the not-inundated position. The stirred solution was made by the soil and ultrapure water, then, the content of water-soluble ions, electric conductivity (EC), and pH were measured. The soil obtained in the tsunami inundated area contains much water-soluble ions (Na + , Mg 2+ , Cl - , Br - , SO 4 2- ) compared to the samples obtained in the not-inundated area. The discriminant analysis of the tsunami inundation was conducted using the amount of ions in the soil. High discriminant accuracy (over 90%) was obtained with Na + , Mg 2+ , Cl - , Br - , SO 4 2- and EC. Br - , Cl - , Na + are believed to be suitable for the discriminant analysis about tsunamis considering the contaminant

A Survey of Rabbit Handling Methods Within the United Kingdom and the Republic of Ireland.

Science.gov (United States)

Oxley, James Andrew; Ellis, Clare Frances; McBride, E Anne; McCormick, Wanda Denise

2018-04-25

Rabbits are commonly kept in a variety of settings, including homes, laboratories, and veterinary clinics. Despite the popularity of keeping this prey species, little research has investigated current methods of handling. The aim of this study was to examine the experience of caregivers (owners and keepers) in using five handling methods commonly referred to in books written for companion animal (pet) owners and veterinary and/or laboratory personnel. An online survey was completed by 2644 respondents, representing all three of these groups, and breeders. Data were acquired to determine sources that participants used to gain knowledge of different handling methods, the methods they used and for what purposes they used them, and their perceptions of any associated difficulties or welfare concerns. Results indicated that participants most frequently used the method of supporting a rabbit's body against a person's chest, which was considered the easiest and most welfare-friendly method of the handling methods explored. "Scruffing with rear support" was the least used method and was considered to be distressing and painful for the rabbit. As rabbits are a terrestrial prey species, being picked up is likely an innately stressful experience. Additional research is encouraged to explore the experience of rabbits during handling to identify methods that can be easily used with the fewest welfare compromises.

Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

OpenAIRE

Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

2016-01-01

Objective: To examine sociodemographic and behavioural differences between men whohave sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey.\\ud Methods: We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men inthe same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European...

Study on Developments in Accident Investigation Methods: A Survey of the 'State-of-the-Art'

Energy Technology Data Exchange (ETDEWEB)

Hollnagel, Erik; Speziali, Josephine (Ecole des Mines de Paris, F-06904 Sophia Antipolis (France))

2008-01-15

The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or 'human error'. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains, including nuclear power production, accident investigation methods are only updated when their inability to account for novel types of accidents and incidents becomes inescapable. Accident investigation methods therefore typically lag behind the socio-technological developments by 20 years or more. The project first compiled a set of methods from the recognised scientific literature and in major major research and development programs, excluding methods limited to risk assessment, technological malfunctions, human reliability, and safety management methods. An initial set of 21 methods was further reduced to seven by retaining only prima facie accident investigation methods and avoiding overlapping or highly similar methods. The second step was to develop a set of criteria used to characterise the methods. The starting point was Perrow's description of normal accidents in socio-technical systems, which used the dimensions of coupling, going from loose to tight, and interactions, going from linear to complex. For practical reasons, the second dimension was changed to that of tractability or how easy it is to describe the system, where the sub-criteria are the level of detail, the availability of an articulated model, and the system dynamics. On this basis the seven selected methods were characterised in terms of the systems - or conditions - they could account for, leading to the following four groups: methods suitable for systems that are loosely coupled and tractable, methods suitable for systems that are tightly coupled and tractable, methods suitable for systems that

SABE Colombia: Survey on Health, Well-Being, and Aging in Colombia—Study Design and Protocol

Science.gov (United States)

Corchuelo, Jairo; Curcio, Carmen-Lucia; Calzada, Maria-Teresa; Mendez, Fabian

2016-01-01

Objective. To describe the design of the SABE Colombia study. The major health study of the old people in Latin America and the Caribbean (LAC) is the Survey on Health, Well-Being, and Aging in LAC, SABE (from initials in Spanish: SAlud, Bienestar & Envejecimiento). Methods. The SABE Colombia is a population-based cross-sectional study on health, aging, and well-being of elderly individuals aged at least 60 years focusing attention on social determinants of health inequities. Methods and design were similar to original LAC SABE. The total sample size of the study at the urban and rural research sites (244 municipalities) was 23.694 elderly Colombians representative of the total population. The study had three components: (1) a questionnaire covering active aging determinants including anthropometry, blood pressure measurement, physical function, and biochemical and hematological measures; (2) a subsample survey among family caregivers; (3) a qualitative study with gender and cultural perspectives of quality of life to understand different dimensions of people meanings. Conclusions. The SABE Colombia is a comprehensive, multidisciplinary study of the elderly with respect to active aging determinants. The results of this study are intended to inform public policies aimed at tackling health inequalities for the aging society in Colombia. PMID:27956896

FY 1998 report on the verification survey of geothermal survey technology, etc./Development of the reservoir fluctuation survey method (Summary). Theme 3. Development of the electric/electromagnetic survey method; 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 3. Denki denjiki tansaho kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Three observation wells were drilled in the Ogiri experimental field. The depth of drilling was 101-120m. In the self-potential observation, admitted were fluctuations, etc. caused by daily changes (tidal changes and earth current), earth current by external magnetic field induction, well drilling noise and injection well. In the resistivity structure survey, the whole area indicated a three-layer (high/low/high) structure, and the shallow high-resistivity layer was correspondent with the new unaltered volcanic rock, and the medium-depth low-resistivity layer with the clayey alteration. On the assumption that the reservoir model is improved by properties of geothermal water and 35% of the returning geothermal water goes back to the production region, pressure/chlorine concentration were satisfactorily explained. Changes in chlorine concentration by the returning geothermal water are estimated at 22% within production reservoir and at 52% in injection region, and when considering temperature changes, it was predicted that fluctuations of the resistivity underground are within 20%. The accuracy of the MT method was studied by using the MT method with the existing MT method. The accuracy was not enough to detect a resistivity of 10%, and therefore, the repeated measurement by fixed electrode or the continued MT method monitoring is needed. (NEDO)

A study of topics for distance education-A survey of U.S. Fish and Wildlife Service employees

Science.gov (United States)

Ratz, Joan M.; Schuster, Rudy M.; Marcy, Ann H.

2011-01-01

The purpose of this study was to identify training topics and distance education technologies preferred by U.S. Fish and Wildlife Service employees. This study was conducted on behalf of the National Conservation Training Center to support their distance education strategy planning and implementation. When selecting survey recipients, we focused on employees in positions involving conservation and environmental education and outreach programming. We conducted the study in two phases. First, we surveyed 72 employees to identify useful training topics. The response rate was 61 percent; respondents were from all regions and included supervisors and nonsupervisors. Five topics for training were identified: creating and maintaining partnerships (partnerships), technology, program planning and development (program planning), outreach methods to engage the community (outreach methods), and evaluation methods. In the second phase, we surveyed 1,488 employees to assess preferences for training among the five topics identified in the first survey and preferences among six distance education technologies: satellite television, video conferencing, audio conferencing, computer mediated training, written resources, and audio resources. Two types of instructor-led training were included on the survey to compare to the technology options. Respondents were asked what types of information, such as basic facts or problem solving skills, were needed for each of the five topics. The adjusted response rate was 64 percent; respondents were from all regions and included supervisors and nonsupervisors. The results indicated clear preferences among respondents for certain training topics and technologies. All five training topics were valued, but the topics of partnerships and technology were given equal value and were valued more than the other three topics. Respondents indicated a desire for training on the topics of partnerships, technology, program planning, and outreach methods. For

Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

Science.gov (United States)

L'Engle, Kelly; Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

2018-01-01

Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit dialing of mobile

Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

Directory of Open Access Journals (Sweden)

Kelly L'Engle

Full Text Available Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample.The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census.The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample.The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit

Methods for computing water-quality loads at sites in the U.S. Geological Survey National Water Quality Network

Science.gov (United States)

Lee, Casey J.; Murphy, Jennifer C.; Crawford, Charles G.; Deacon, Jeffrey R.

2017-10-24

The U.S. Geological Survey publishes information on concentrations and loads of water-quality constituents at 111 sites across the United States as part of the U.S. Geological Survey National Water Quality Network (NWQN). This report details historical and updated methods for computing water-quality loads at NWQN sites. The primary updates to historical load estimation methods include (1) an adaptation to methods for computing loads to the Gulf of Mexico; (2) the inclusion of loads computed using the Weighted Regressions on Time, Discharge, and Season (WRTDS) method; and (3) the inclusion of loads computed using continuous water-quality data. Loads computed using WRTDS and continuous water-quality data are provided along with those computed using historical methods. Various aspects of method updates are evaluated in this report to help users of water-quality loading data determine which estimation methods best suit their particular application.

Use of deterministic methods in survey calculations for criticality problems

International Nuclear Information System (INIS)

Hutton, J.L.; Phenix, J.; Course, A.F.

1991-01-01

A code package using deterministic methods for solving the Boltzmann Transport equation is the WIMS suite. This has been very successful for a range of situations. In particular it has been used with great success to analyse trends in reactivity with a range of changes in state. The WIMS suite of codes have a range of methods and are very flexible in the way they can be combined. A wide variety of situations can be modelled ranging through all the current Thermal Reactor variants to storage systems and items of chemical plant. These methods have recently been enhanced by the introduction of the CACTUS method. This is based on a characteristics technique for solving the Transport equation and has the advantage that complex geometrical situations can be treated. In this paper the basis of the method is outlined and examples of its use are illustrated. In parallel with these developments the validation for out of pile situations has been extended to include experiments with relevance to criticality situations. The paper will summarise this evidence and show how these results point to a partial re-adoption of deterministic methods for some areas of criticality. The paper also presents results to illustrate the use of WIMS in criticality situations and in particular show how it can complement codes such as MONK when used for surveying the reactivity effect due to changes in geometry or materials. (Author)

The Study of Aeromagnetic Surveys in Taiwan

Science.gov (United States)

Li, P. T.; Tong, L. T.; Lin, W.; Chang, S. F.

2016-12-01

The airborne magnetic survey is a cost-effective method for regional geological investigation. Most of developed countries use aeromagnetic data as important fundamental information for resources development. The first aeromagnetic survey was conducted in the offshore areas of west and southern Taiwan in 1968 by U.S. Naval Oceanographic Office to help Taiwan finding oil. Later, in 2007, a helicopter-borne magnetic survey was proceed in east Taiwan for underground granite bodies. In order to improve better understanding of deep geological structures associated with the Holocene volcanism in Taiwan, we applied helicopter-borne magnetic technique in northern Taiwan include Tatun Volcano Group (TVG) and Kueishan island in 2013 and 2014 to obtain the distribution information of potential magma chamber as well as hydrothermal pathways along regional geological structures. The most important findings of the high-resolution aeromagnetic dataset since 1960's to 2014 acquired include: (1) the distribution of subsurface igneous rocks and the Curie point depth in Tatun Volcano Group, Keelung Volcano Group, and Kueishantao Volcano; (2) the widely distributed NE high-magnetic belts in northern Taiwan may be associated with NE fractures created by long-term subsidence in this area; (3) the high-magnetic belts in south of Lanyang River which is very different from the magnetic characteristics of the Central Range may imply paleo oceanic plate; (4) the NE high-magnetic belts in Penghu area formed by magma intrusion along NE fractures and the dense and high-magnetic anomalies may be associated with the Miocene basaltic lava overlying on the pre-Tertiary igneous dykes and are widely spread in northern Penghu area. The new aeromagnetic survey techniques help us to investigate the areas with steep terrain or covered by dense vegetation which was difficult to obtain reasonable geological understanding, and also provide an opportunity for us to apply the geothermal energy prospecting.

The Aalborg Survey / Part 4 - Literature Study

DEFF Research Database (Denmark)

Harder, Henrik; Christensen, Cecilie Breinholm

Background and purpose The Aalborg Survey consists of four independent parts: a web, GPS and an interview based survey and a literature study, which together form a consistent investigation and research into use of urban space, and specifically into young people’s use of urban space: what young......) and the research focus within the cluster of Mobility and Tracking Technologies (MoTT), AAU. Summary / Part 4 - Literature Study The 4th part of the DUS research project has been carried out during the spring 2012 and consists primarily of a literature search and bibliographical listings of literature by the three....... Jensen are conducting research within the field related to this research project. Furthermore, both are intended end users of the outcome of this literature study. Finally, all references have been collected in a digital database in RefWorks....

Wet treatment of ashes, a survey of methods; Vaat rening av askor, metodoeversikt

Energy Technology Data Exchange (ETDEWEB)

Bjurstroem, Henrik [AaF-Energi och Miljoe AB, Stockhom (Sweden); Steenari, Britt-Marie [Chalmers Univ. of Technology, Goeteborg (Sweden)

2003-10-01

Ash contains elements and compounds that are questionable from an environmental point of view, such as very soluble salts, alkali yielding a high pH-value, metals, heavy metals and organic compounds. When ash is to be used, one requires that it is stable, i. e. that it does not influence the immediate surroundings and the environment in a negative way. Stability means that water that comes into contact with ash shall not pick up environmentally disruptive compounds to any significant extent. The presence of heavy metals in the ash does not always lead to their being leached to the surroundings, but it does always imply an uncertainty. It is probable that fly ash from incineration of municipal solid waste has to be treated in some way before it is landfilled. Washing the ash or dissolving it partially with a solvent such as water or an acid is a relatively simple method to reduce the risk for contamination of the environment by removing soluble compounds from the ash. Such methods consist of techniques that in other applications are proven and robust, and that may be adapted to the present conditions: the composition and the properties of the ash. In this report, a survey of methods is presented. Wet treatments may be apprehended as a combined separation and concentration process: on the one hand environmentally disruptive compounds are removed from ash, on the other hand these are concentrated in a remainder survival remission rate. These methods are a perfect pretreatment for various stabilization methods, a. o. thermal treatments such as vitrifying or sintering, or for utilization of the ashes e. g. in public works as they remove the obstacles to a good performance, namely the soluble salts. In this report are presented a systematic description of wet treatments aiming at purification and a survey of methods of industrial interest. A certain number of wet treatment methods are in operation outside Sweden, principally for fly ash from municipal solid waste

Nationwide cross-sectional survey of schistosomiasis and soil-transmitted helminthiasis in Sudan: study protocol.

Science.gov (United States)

Cha, Seungman; Hong, Sung-Tae; Lee, Young-Ha; Lee, Keon Hoon; Cho, Dae Seong; Lee, Jinmoo; Chai, Jong-Yil; Elhag, Mousab Siddig; Khaled, Soheir Gabralla Ahmad; Elnimeiri, Mustafa Khidir Mustafa; Siddig, Nahid Abdelgadeir Ali; Abdelrazig, Hana; Awadelkareem, Sarah; Elshafie, Azza Tag Eldin; Ismail, Hassan Ahmed Hassan Ahmed; Amin, Mutamad

2017-09-12

Schistosomiasis and soil-transmitted helminthiasis (STHs) are target neglected tropical diseases (NTDs) of preventive chemotherapy, but the control and elimination of these diseases have been impeded due to resource constraints. Few reports have described study protocol to draw on when conducting a nationwide survey. We present a detailed methodological description of the integrated mapping of schistosomiasis and STHs on the basis of our experiences, hoping that this protocol can be applied to future surveys in similar settings. In addition to determining the ecological zones requiring mass drug administration interventions, we aim to provide precise estimates of the prevalence of these diseases. A school-based cross-sectional design will be applied for the nationwide survey across Sudan. The survey is designed to cover all districts in every state. We have divided each district into 3 different ecological zones depending on proximity to bodies of water. We will employ a probability-proportional-to-size sampling method for schools and systematic sampling for student selection to provide adequate data regarding the prevalence for schistosomiasis and STHs in Sudan at the state level. A total of 108,660 students will be selected from 1811 schools across Sudan. After the survey is completed, 391 ecological zones will be mapped out. To carry out the survey, 655 staff members were recruited. The feces and urine samples are microscopically examined by the Kato-Katz method and the sediment smears for helminth eggs respectively. For quality control, a minimum of 10% of the slides will be rechecked by the federal supervisors in each state and also 5% of the smears are validated again within one day by independent supervisors. This nationwide mapping is expected to generate important epidemiological information and indicators about schistosomiasis and STHs that will be useful for monitoring and evaluating the control program. The mapping data will also be used for overviewing

Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

2017-10-05

This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

A Comparison of Web-Based and Paper-Based Survey Methods: Testing Assumptions of Survey Mode and Response Cost

Science.gov (United States)

Greenlaw, Corey; Brown-Welty, Sharon

2009-01-01

Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and…

Rethinking Traditional Methods of Survey Validation

Science.gov (United States)

Maul, Andrew

2017-01-01

It is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as self-control, growth mindsets, and grit. Increasingly, such instruments are being used not only for basic research but also for supporting decisions regarding educational policy and accountability. The…

Have "new" methods in medical education reached German-speaking Central Europe: a survey.

Science.gov (United States)

Fandler, Martin; Habersack, Marion; Dimai, Hans P

2014-08-16

Simulation-based-training (SBT) in the education of health professionals is discussed as an effective alternative for knowledge and skills enhancement as well as for the establishment of a secure learning environment, for learners and patients. In the Anglo-American region, SBT and simulation and training centers (STC) are numbered as standard for medical training. In German-speaking Central Europe, priority is still given to the establishment of SBT and STC. The purpose of this study was (i) to survey the status quo relating to the existence and facilities of simulation and training centers at medical universities in German-speaking Central Europe and (ii) the evaluation of training methods, especially in the area of emergency medicine skills. All public and private medical universities or medical faculties in Germany (36), Austria (4) and German-speaking Switzerland (3) were interviewed. In the survey, information regarding the existence and facilities of STCs and information with regards to the use of SBT in the area of emergency medicine was requested. The questions were partly posed in a closed-ended-, in an open-ended- and in a multiple choice format (with the possibility of selecting more than one answer). Of a total of 43 contacted medical universities/medical faculties, 40 ultimately participated in the survey. As decisive for the establishment of a STC the potential to improve the clinical-practical training and the demand by students were listed. Obligatory training in a STC during the first and sixth academic year was confirmed only by 12 institutions, before the first invasive procedure on patients by 17 institutions. 13 institutions confirmed the use of the STC for the further training of physicians and care-staff. Training for the acute care and emergency medicine skills in the field of pediatrics, for the most part, occurs decentralized. New methods in medical training have reached German-speaking Central Europe, but the simulation and training

The relative size of measurement error and attrition error in a panel survey. Comparing them with a new multi-trait multi-method model

NARCIS (Netherlands)

Lugtig, Peter

2017-01-01

This paper proposes a method to simultaneously estimate both measurement and nonresponse errors for attitudinal and behavioural questions in a longitudinal survey. The method uses a Multi-Trait Multi-Method (MTMM) approach, which is commonly used to estimate the reliability and validity of survey

Alcohol Warning Label Awareness and Attention: A Multi-method Study.

Science.gov (United States)

Pham, Cuong; Rundle-Thiele, Sharyn; Parkinson, Joy; Li, Shanshi

2018-01-01

Evaluation of alcohol warning labels requires careful consideration ensuring that research captures more than awareness given that labels may not be prominent enough to attract attention. This study investigates attention of current in market alcohol warning labels and examines whether attention can be enhanced through theoretically informed design. Attention scores obtained through self-report methods are compared to objective measures (eye-tracking). A multi-method experimental design was used delivering four conditions, namely control, colour, size and colour and size. The first study (n = 559) involved a self-report survey to measure attention. The second study (n = 87) utilized eye-tracking to measure fixation count and duration and time to first fixation. Analysis of Variance (ANOVA) was utilized. Eye-tracking identified that 60% of participants looked at the current in market alcohol warning label while 81% looked at the optimized design (larger and red). In line with observed attention self-reported attention increased for the optimized design. The current study casts doubt on dominant practices (largely self-report), which have been used to evaluate alcohol warning labels. Awareness cannot be used to assess warning label effectiveness in isolation in cases where attention does not occur 100% of the time. Mixed methods permit objective data collection methodologies to be triangulated with surveys to assess warning label effectiveness. Attention should be incorporated as a measure in warning label effectiveness evaluations. Colour and size changes to the existing Australian warning labels aided by theoretically informed design increased attention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Using electronic surveys in nursing research.

Science.gov (United States)

Cope, Diane G

2014-11-01

Computer and Internet use in businesses and homes in the United States has dramatically increased since the early 1980s. In 2011, 76% of households reported having a computer, compared with only 8% in 1984 (File, 2013). A similar increase in Internet use has also been seen, with 72% of households reporting access of the Internet in 2011 compared with 18% in 1997 (File, 2013). This emerging trend in technology has prompted use of electronic surveys in the research community as an alternative to previous telephone and postal surveys. Electronic surveys can offer an efficient, cost-effective method for data collection; however, challenges exist. An awareness of the issues and strategies to optimize data collection using web-based surveys is critical when designing research studies. This column will discuss the different types and advantages and disadvantages of using electronic surveys in nursing research, as well as methods to optimize the quality and quantity of survey responses.

Behavioral Changes Based on a Course in Agroecology: A Mixed Methods Study

Science.gov (United States)

Harms, Kristyn; King, James; Francis, Charles

2009-01-01

This study evaluated and described student perceptions of a course in agroecology to determine if participants experienced changed perceptions and behaviors resulting from the Agroecosystems Analysis course. A triangulation validating quantitative data mixed methods approach included a written survey comprised of both quantitative and open-ended…

National Survey of the Education of Teachers. Bulletin, 1933, No. 10. Volume V: Special Survey Studies

Science.gov (United States)

Frazier, Benjamin W.; Betts, Gilbert L.; Greenleaf, Walter J.; Waples, Douglas; Dearborn, Ned H.; Carney, Mabel; Alexander, Thomas

1935-01-01

The Seventy-first Congress authorized a survey of the education of teachers on a Nation-wide scope, conducted during the last 3 years. After the work of the survey was organized it was apparent that only a limited number of studies could be undertaken with the time and funds available. It was decided, therefore, to cooperate whenever possible with…

VoIP Accessibility: A Usability Study of Voice over Internet Protocol (VoIP) Systems and A Survey of VoIP Users with Vision Loss

Science.gov (United States)

Packer, Jaclyn; Reuschel, William

2018-01-01

Introduction: Accessibility of Voice over Internet Protocol (VoIP) systems was tested with a hands-on usability study and an online survey of VoIP users who are visually impaired. The survey examined the importance of common VoIP features, and both methods assessed difficulty in using those features. Methods: The usability test included four paid…

A FIELD SURVEY ON THE CONSPICUOUS CONSUMPTION TRENDINTURKEY (CASE STUDY OF MUGLA PROVINCE

Directory of Open Access Journals (Sweden)

Gülay HIZ

2011-07-01

Full Text Available People consume goods and services primarily in order to meet their physiologicalneeds (food, drink, shelter, etc. and safety needs(safety of life and property.However, some individuals in every society make consumption apart from thesekinds of needs in order to show off and influenceothers. For some individuals,the demand for goods and services leading to conspicuous consumption, comeahead of the physiological and security needs. Thisstudy examines psychologicalsatisfaction for the money spent on goods and services, which means"conspicuous consumption" and covers a field survey. In this survey that wasconducted in Muğla, survey method was chosen as a method of data collection.Survey forms were conducted in Muğla province, Bodrum, Marmaris and Fethiye.The datas that were collected were analyzed in SPSSprogram.In the case ofMugla which supports the work of pretentious natureof consumption, somejudgments about the behavior of consumption were made by consideringconsumption styles in influencing lifestyle, consumer behavior and attitudes aboutthe "status, prestige, luxury, rationality and theconscious consumer" variables.

Survey of Nuclear Methods in Chemical Technology

International Nuclear Information System (INIS)

Broda, E.

1966-01-01

An attempt is made to classify nuclear methods on a logical basis to facilitate assimilation by the technologist. The three main groups are: (I) Tracer methods, (II) Methods based on the influence of absorbers on radiations to be measured, and (III) Radiation chemical methods. The variants of the first two groups are discussed in some detail, and typical examples are given. Group I can be subdivided into (1) Indicator methods, (2) Emanation methods, (3) Radioreagent methods, and (4) Isotope dilution methods, Group II into (5) Activation methods, (6) Absorption methods, (7) Induced Nuclear Reaction methods, (8) Scattering methods, and (9) Fluorescence methods. While the economic benefits due to nuclear methods already run into hundreds of millions of dollars annually, owing to radiation protection problems radiochemical methods in the strict sense are not widely used in actual production. It is suggested that more use should be made of pilot plant tracer studies of chemical processes as used in industry. (author)

Delirium diagnosis methodology used in research: a survey-based study.

Science.gov (United States)

Neufeld, Karin J; Nelliot, Archana; Inouye, Sharon K; Ely, E Wesley; Bienvenu, O Joseph; Lee, Hochang Benjamin; Needham, Dale M

2014-12-01

To describe methodology used to diagnose delirium in research studies evaluating delirium detection tools. The authors used a survey to address reference rater methodology for delirium diagnosis, including rater characteristics, sources of patient information, and diagnostic process, completed via web or telephone interview according to respondent preference. Participants were authors of 39 studies included in three recent systematic reviews of delirium detection instruments in hospitalized patients. Authors from 85% (N = 33) of the 39 eligible studies responded to the survey. The median number of raters per study was 2.5 (interquartile range: 2-3); 79% were physicians. The raters' median duration of clinical experience with delirium diagnosis was 7 years (interquartile range: 4-10), with 5% having no prior clinical experience. Inter-rater reliability was evaluated in 70% of studies. Cognitive tests and delirium detection tools were used in the delirium reference rating process in 61% (N = 21) and 45% (N = 15) of studies, respectively, with 33% (N = 11) using both and 27% (N = 9) using neither. When patients were too drowsy or declined to participate in delirium evaluation, 70% of studies (N = 23) used all available information for delirium diagnosis, whereas 15% excluded such patients. Significant variability exists in reference standard methods for delirium diagnosis in published research. Increasing standardization by documenting inter-rater reliability, using standardized cognitive and delirium detection tools, incorporating diagnostic expert consensus panels, and using all available information in patients declining or unable to participate with formal testing may help advance delirium research by increasing consistency of case detection and improving generalizability of research results. Copyright © 2014 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

Soil surveying using electromagnetic methods; Denji tansaho wo mochiita jiban chosa

Energy Technology Data Exchange (ETDEWEB)

Suzuki, I; Kawauchi, K; Goto, N [Muroran Institute of Technology, Hokkaido (Japan); Takahashi, N; Yamada, T [Zukohsya Co. Ltd., Hokkaido (Japan)

1997-10-22

Electromagnetic surveying method is applied in Muroran Institute of Technology`s site for power transmission steel towers for the locating of structures buried in the ground and for the study of obstruction to the application of the method. The devices employed are the EM31 and EM38 which are portable conductivity measuring instruments manufactured by GEONICS Company. With the probeable depth in the horizontal dipole mode being approximately half that in the vertical dipole mode, depths of 0.5m, 1m, 3m, and 6m may be explored using the two instruments. In the measurement test, the devices are used to determine a reinforced concrete-made multi-purpose duct that accommodates water pipes, sewers, various electric wires, and heating pipes and is buried at a depth of 2-3m in the ground. In the measurement for a 3m-deep level, a spot high in conductivity due to the reinforced concrete is detected, and the result roughly corresponds to the lay of the duct. In the measurement for a 6m-deep level, no high-conductivity spot is found, meaning there is no such structure at this depth. Although there are some other high conductivity values recorded, they are attributed to manhole covers or steel tower bases on the ground surface. 3 refs., 8 figs.

Social media methods for studying rare diseases.

Science.gov (United States)

Schumacher, Kurt R; Stringer, Kathleen A; Donohue, Janet E; Yu, Sunkyung; Shaver, Ashley; Caruthers, Regine L; Zikmund-Fisher, Brian J; Fifer, Carlen; Goldberg, Caren; Russell, Mark W

2014-05-01

For pediatric rare diseases, the number of patients available to support traditional research methods is often inadequate. However, patients who have similar diseases cluster "virtually" online via social media. This study aimed to (1) determine whether patients who have the rare diseases Fontan-associated protein losing enteropathy (PLE) and plastic bronchitis (PB) would participate in online research, and (2) explore response patterns to examine social media's role in participation compared with other referral modalities. A novel, internet-based survey querying details of potential pathogenesis, course, and treatment of PLE and PB was created. The study was available online via web and Facebook portals for 1 year. Apart from 2 study-initiated posts on patient-run Facebook pages at the study initiation, all recruitment was driven by study respondents only. Response patterns and referral sources were tracked. A total of 671 respondents with a Fontan palliation completed a valid survey, including 76 who had PLE and 46 who had PB. Responses over time demonstrated periodic, marked increases as new online populations of Fontan patients were reached. Of the responses, 574 (86%) were from the United States and 97 (14%) were international. The leading referral sources were Facebook, internet forums, and traditional websites. Overall, social media outlets referred 84% of all responses, making it the dominant modality for recruiting the largest reported contemporary cohort of Fontan patients and patients who have PLE and PB. The methodology and response patterns from this study can be used to design research applications for other rare diseases. Copyright © 2014 by the American Academy of Pediatrics.

A loop-mediated isothermal amplification method for a differential identification of Taenia tapeworms from human: application to a field survey.

Science.gov (United States)

Nkouawa, Agathe; Sako, Yasuhito; Li, Tiaoying; Chen, Xingwang; Nakao, Minoru; Yanagida, Tetsuya; Okamoto, Munehiro; Giraudoux, Patrick; Raoul, Francis; Nakaya, Kazuhiro; Xiao, Ning; Qiu, Jiamin; Qiu, Dongchuan; Craig, Philip S; Ito, Akira

2012-12-01

In this study, we applied a loop-mediated isothermal amplification method for identification of human Taenia tapeworms in Tibetan communities in Sichuan, China. Out of 51 proglottids recovered from 35 carriers, 9, 1, and 41 samples were identified as Taenia solium, Taenia asiatica and Taenia saginata, respectively. Same results were obtained afterwards in the laboratory, except one sample. These results demonstrated that the LAMP method enabled rapid identification of parasites in the field surveys, which suggested that this method would contribute to the control of Taenia infections in endemic areas. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Everyday life in a UK retirement village: a mixed-methods study

OpenAIRE

Liddle, Jennifer

2016-01-01

This study focuses on the experiences of older people living in a UK purpose-built retirement community – Denham Garden Village (DGV). The aim was to understand more about everyday life in this particular environmental context including how the environment and organisation of the village related to residents’ everyday experiences. Using a mixed methods approach, the study draws on quantitative survey data from the Longitudinal study of Ageing in a Retirement Community (LARC) and combines this...

Credibility and Usefulness of Health Information on Facebook: A Survey Study with U.S. College Students

Science.gov (United States)

Kim, Sung Un; Syn, Sue Yeon

2016-01-01

Introduction: This study examines ways in which college students perceive the credibility and usefulness of health information on Facebook, depending on topic sensitivity, information source and demographic factors. Method: With self-selection sampling, data were collected from two universities through an online survey; 351 responses were used for…

Health inequalities: survey data compared to doctor defined data.

NARCIS (Netherlands)

Westert, G.P.; Schellevis, F.G.

2003-01-01

Aim: To compare prevalence of conditions and health inequalities in one study population using two methods of data collection: health interview survey and GP registration of consultations. Methods: Data is from the Second Dutch Survey of General Practice, using a multistage sampling design with

Contingent valuation method applied to survey on personal preferences on choice of electric power source

International Nuclear Information System (INIS)

Takahashi, Reiko; Nakagome, Yoshihiro

2004-01-01

A Survey was conducted on personal preferences regarding their choice of electric power source to verify the applicability of Contingent Valuation Method (CVM) to such analysis. The survey was carried out on local and urban inhabitants in two steps, first by mail and thereafter by direct interview. A choice of four typical forms of power source was presented: nuclear, coal, hydro and green power; and the question was asked whether the respondent would be willing to pay additional charge for specifying their preferable power source. The mail survey indicated more than half of the respondents hold some willingness to pay either for disuse of nuclear power or expansion of green power. The interview survey revealed various complex motives lying behind their answers. Consequently, it was found that their preference is significantly correlated to their personal image or knowledge of power sources, their thinking or attitude toward energy conservation, their sense of consumption and their private view of life. It is concluded that CVM is pertinently applicable to quantitative analysis of individual opinions, particularly in terms of their motivation to participate in national energy issues. A number of modifications, however, should be required to be brought to the survey design in order to ensure smooth application in practice. (author)

Survey of sterile admixture practices in canadian hospital pharmacies: part 1. Methods and results.

Science.gov (United States)

Warner, Travis; Nishi, Cesilia; Checkowski, Ryan; Hall, Kevin W

2009-03-01

The 1996 Guidelines for Preparation of Sterile Products in Pharmacies of the Canadian Society of Hospital Pharmacists (CSHP) represent the current standard of practice for sterile compounding in Canada. However, these guidelines are practice recommendations, not enforceable standards. Previous surveys of sterile compounding practices have shown that actual practice deviates markedly from voluntary practice recommendations. In 2004, the United States Pharmacopeia (USP) published its "General Chapter Pharmaceutical Compounding-Sterile Preparations", which set a more rigorous and enforceable standard for sterile compounding in the United States. To assess sterile compounding practices in Canadian hospital pharmacies and to compare them with current CSHP recommendations and USP chapter standards. An online survey, based on previous studies of sterile compounding practices, the CSHP guidelines, and the chapter standards, was created and distributed to 193 Canadian hospital pharmacies. A total of 133 pharmacies completed at least part of the survey, for a response rate of 68.9%. All respondents reported the preparation of sterile products. Various degrees of deviation from the practice recommendations were noted for virtually all areas of the CSHP guidelines and the USP standards. Low levels of compliance were most notable in the areas of facilities and equipment, process validation, and product testing. Availability in the central pharmacy of a clean room facility meeting or exceeding the criteria of International Organization for Standardization (ISO) class 8 is a requirement of the chapter standards, but more than 40% of responding pharmacies reported that they did not have such a facility. Higher levels of compliance were noted for policies and procedures, garbing requirements, aseptic technique, and handling of hazardous products. Part 1 of this series reports the survey methods and results relating to policies, personnel, raw materials, storage and handling

MyVoice National Text Message Survey of Youth Aged 14 to 24 Years: Study Protocol.

Science.gov (United States)

DeJonckheere, Melissa; Nichols, Lauren P; Moniz, Michelle H; Sonneville, Kendrin R; Vydiswaran, V G Vinod; Zhao, Xinyan; Guetterman, Timothy C; Chang, Tammy

2017-12-11

There has been little progress in adolescent health outcomes in recent decades. Researchers and youth-serving organizations struggle to accurately elicit youth voice and translate youth perspectives into health care policy. Our aim is to describe the protocol of the MyVoice Project, a longitudinal mixed methods study designed to engage youth, particularly those not typically included in research. Text messaging surveys are collected, analyzed, and disseminated in real time to leverage youth perspectives to impact policy. Youth aged 14 to 24 years are recruited to receive weekly text message surveys on a variety of policy and health topics. The research team, including academic researchers, methodologists, and youth, develop questions through an iterative writing and piloting process. Question topics are elicited from community organizations, researchers, and policy makers to inform salient policies. A youth-centered interactive platform has been developed that automatically sends confidential weekly surveys and incentives to participants. Parental consent is not required because the survey is of minimal risk to participants. Recruitment occurs online (eg, Facebook, Instagram, university health research website) and in person at community events. Weekly surveys collect both quantitative and qualitative data. Quantitative data are analyzed using descriptive statistics. Qualitative data are quickly analyzed using natural language processing and traditional qualitative methods. Mixed methods integration and analysis supports a more in-depth understanding of the research questions. We are currently recruiting and enrolling participants through in-person and online strategies. Question development, weekly data collection, data analysis, and dissemination are in progress. MyVoice quickly ascertains the thoughts and opinions of youth in real time using a widespread, readily available technology-text messaging. Results are disseminated to researchers, policy makers, and

The swift UVOT stars survey. I. Methods and test clusters

Energy Technology Data Exchange (ETDEWEB)

Siegel, Michael H.; Porterfield, Blair L.; Linevsky, Jacquelyn S.; Bond, Howard E.; Hoversten, Erik A.; Berrier, Joshua L.; Gronwall, Caryl A. [Department of Astronomy and Astrophysics, The Pennsylvania State University, 525 Davey Laboratory, University Park, PA 16802 (United States); Holland, Stephen T. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Breeveld, Alice A. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey RH5 6NT (United Kingdom); Brown, Peter J., E-mail: siegel@astro.psu.edu, E-mail: blp14@psu.edu, E-mail: heb11@psu.edu, E-mail: caryl@astro.psu.edu, E-mail: sholland@stsci.edu, E-mail: aab@mssl.ucl.ac.uk, E-mail: grbpeter@yahoo.com [George P. and Cynthia Woods Mitchell Institute for Fundamental Physics and Astronomy, Texas A. and M. University, Department of Physics and Astronomy, 4242 TAMU, College Station, TX 77843 (United States)

2014-12-01

We describe the motivations and background of a large survey of nearby stellar populations using the Ultraviolet Optical Telescope (UVOT) on board the Swift Gamma-Ray Burst Mission. UVOT, with its wide field, near-UV sensitivity, and 2.″3 spatial resolution, is uniquely suited to studying nearby stellar populations and providing insight into the near-UV properties of hot stars and the contribution of those stars to the integrated light of more distant stellar populations. We review the state of UV stellar photometry, outline the survey, and address problems specific to wide- and crowded-field UVOT photometry. We present color–magnitude diagrams of the nearby open clusters M67, NGC 188, and NGC 2539, and the globular cluster M79. We demonstrate that UVOT can easily discern the young- and intermediate-age main sequences, blue stragglers, and hot white dwarfs, producing results consistent with previous studies. We also find that it characterizes the blue horizontal branch of M79 and easily identifies a known post-asymptotic giant branch star.

The swift UVOT stars survey. I. Methods and test clusters

International Nuclear Information System (INIS)

Siegel, Michael H.; Porterfield, Blair L.; Linevsky, Jacquelyn S.; Bond, Howard E.; Hoversten, Erik A.; Berrier, Joshua L.; Gronwall, Caryl A.; Holland, Stephen T.; Breeveld, Alice A.; Brown, Peter J.

2014-01-01

We describe the motivations and background of a large survey of nearby stellar populations using the Ultraviolet Optical Telescope (UVOT) on board the Swift Gamma-Ray Burst Mission. UVOT, with its wide field, near-UV sensitivity, and 2.″3 spatial resolution, is uniquely suited to studying nearby stellar populations and providing insight into the near-UV properties of hot stars and the contribution of those stars to the integrated light of more distant stellar populations. We review the state of UV stellar photometry, outline the survey, and address problems specific to wide- and crowded-field UVOT photometry. We present color–magnitude diagrams of the nearby open clusters M67, NGC 188, and NGC 2539, and the globular cluster M79. We demonstrate that UVOT can easily discern the young- and intermediate-age main sequences, blue stragglers, and hot white dwarfs, producing results consistent with previous studies. We also find that it characterizes the blue horizontal branch of M79 and easily identifies a known post-asymptotic giant branch star.

A citizen science based survey method for estimating the density of urban carnivores

Science.gov (United States)

Baker, Rowenna; Charman, Naomi; Karlsson, Heidi; Yarnell, Richard W.; Mill, Aileen C.; Smith, Graham C.; Tolhurst, Bryony A.

2018-01-01

Globally there are many examples of synanthropic carnivores exploiting growth in urbanisation. As carnivores can come into conflict with humans and are potential vectors of zoonotic disease, assessing densities in suburban areas and identifying factors that influence them are necessary to aid management and mitigation. However, fragmented, privately owned land restricts the use of conventional carnivore surveying techniques in these areas, requiring development of novel methods. We present a method that combines questionnaire distribution to residents with field surveys and GIS, to determine relative density of two urban carnivores in England, Great Britain. We determined the density of: red fox (Vulpes vulpes) social groups in 14, approximately 1km2 suburban areas in 8 different towns and cities; and Eurasian badger (Meles meles) social groups in three suburban areas of one city. Average relative fox group density (FGD) was 3.72 km-2, which was double the estimates for cities with resident foxes in the 1980’s. Density was comparable to an alternative estimate derived from trapping and GPS-tracking, indicating the validity of the method. However, FGD did not correlate with a national dataset based on fox sightings, indicating unreliability of the national data to determine actual densities or to extrapolate a national population estimate. Using species-specific clustering units that reflect social organisation, the method was additionally applied to suburban badgers to derive relative badger group density (BGD) for one city (Brighton, 2.41 km-2). We demonstrate that citizen science approaches can effectively obtain data to assess suburban carnivore density, however publicly derived national data sets need to be locally validated before extrapolations can be undertaken. The method we present for assessing densities of foxes and badgers in British towns and cities is also adaptable to other urban carnivores elsewhere. However this transferability is contingent on

Survey of CFD studies on automotive buffeting

International Nuclear Information System (INIS)

An, C.-F.

2005-01-01

In the current automobile market buffeting is one of the customer frequent complaints on luxury cars and SUVs. Buffeting is a low frequency but high level wind noise and makes people inside the vehicle uncomfortable if it lasts for a long period of time. The physical mechanism of buffeting is a complicated phenomenon of aeroacoustic resonance. The aeroacoustic characteristics of buffeting depend on vehicle features and operating conditions. In this paper, a survey of CFD studies on the automotive buffeting is presented. Firstly, several buffeting related concepts, such as Helmholtz resonator, flow over a cavity, shear layer instability and vortex shedding, are reviewed and relevant references are listed. Then, a historic survey of the buffeting investigation is made with emphasis on computational studies. As an example, the buffeting studies at DaimlerChrysler are selected to demonstrate the procedure of CFD simulation for automotive buffeting. The procedure is then validated by the correlation with wind tunnel testing. After that the validated procedure is applied to find solutions for buffeting reduction. Finally, some comments on buffeting studies are addressed. (author)

Report on the survey of geothermal development at Okushiri Island, Hokkaido. Geochemical survey (Finger print method); Hokkaido Okushiritou chinetsu kaihatsu chosa chikagaku chosa (Finga print ho) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-07-01

The geochemical survey by the finger print method was carried out in the Okushiri Island area, Hokkaido, and places of fracture existence were extracted and districts of possible geothermal existence were estimated. The finger print method is a geochemical survey method of soil gas, and the soil gas was collected along the main roads and mountain streams at measuring intervals of 100-300m. The gas collector was buried 30cm deep from the ground surface for 17 days, and the soil gas that rose from deep underground was adsorbed/accumulated into activated carbon. The gas analysis was made by the high sensitivity Curie point pyrolysis/quadrupole mass spectrometer. As a result of the survey analysis, the existence of fracture zone was presumed in the district along the Shiromizusawa that is a branch of the Horonai River, district along the road of the Okushiri Island line and district 1.5km WSW from the 5.8K Pass. Further, out of all 12 specimens, 6 specimens of Type X were distributed in a group in the district 1km square in north, south, east and west with the top of Mt. Shokan almost as the center. The possible existence of geothermal reservoirs was presumed. (NEDO)

Knowledge-attitude-practice survey among Portuguese gynaecologists regarding combined hormonal contraceptives methods.

Science.gov (United States)

Bombas, Teresa; Costa, Ana Rosa; Palma, Fátima; Vicente, Lisa; Sá, José Luís; Nogueira, Ana Maria; Andrade, Sofia

2012-04-01

ABSTRACT Objectives To evaluate knowledge, attitude and practices of Portuguese gynaecologists regarding combined hormonal contraceptives. Methods A cross-sectional survey was conducted among 303 gynaecologists. Results Ninety percent of the gynaecologists considered that deciding on contraceptive methods is a process wherein the woman has her say. Efficacy, safety and the woman's preference were the major factors influencing gynaecologists, while efficacy, tolerability and ease of use were the major factors perceived by the specialists to influence the women's choice. Gynaecologists believed that only 2% of women taking the pill were 100% compliant compared to 48% of those using the patch and 75% of those using the ring. The lower risk of omission was the strong point for the latter methods. Side effects were the main reason to change to another method. Vaginal manipulation was the most difficult topic to discuss. Conclusions Most gynaecologists decided with the woman on the contraceptive method. The main reasons for the gynaecologist's recommendation of a given contraceptive method and the women's choice were different. Counselling implies an open discussion and topics related to sexuality were considered difficult to discuss. Improving communication skills and understanding women's requirements are critical for contraceptive counselling.

Survey of competing sources of manpower demand related to the nuclear power industry. Manpower studies series, Report No. 3 (Draft)

International Nuclear Information System (INIS)

1981-01-01

The following is a report of a survey designed to determine competing sources of demand for technically qualified manpower. The survey is part of a larger research effort which is also designed to investigate occupational employment and training in the nuclear power industry and sources of manpower supply available to the industry. The results of those other studies have been published separately and ara available upon request. This report includes a brief discussion of the background of the study, the research methods employed, the results obtained, and some implications of those findings. The appendices contain copies of the questionnaires used in the survey as well as some additional related data

Survey VS audit by using method 2 to dedicate commercial grade services

International Nuclear Information System (INIS)

Martinez ayucar, F. J.

2014-01-01

Since the start of the commercial grade dedications, both 10CFR21 and EPRI documents, plus the dedication of commercial grade components, and the stage of commercial grade dedication of the services contemplated. And recently the NRC through various communications and answers trafficking among other issues the commercial grade dedication service. The NRC has detected repeatedly incorrect application of the survey as a method of commercial grade dedication and instead has done an audit of the program elements of commercial quality. (Author)

Study of Use of Products and Exposure-Related Behaviors (SUPERB: study design, methods, and demographic characteristics of cohorts

Directory of Open Access Journals (Sweden)

Hertz-Picciotto Irva

2010-08-01

Full Text Available Abstract Background Exposure to toxic chemicals in the home is a growing concern. This report presents an overview of the recruitment, methods for data collection, instruments used to collect data, and participant demographics for a study examining behaviors that influence exposure to environmental toxins in the home environment, also known as SUPERB (Study of Use of Products and Exposure Related Behaviors. Methods The methods involved three different platforms: telephone interviews, internet-based surveys, and home-based monitoring. The purposes of SUPERB were: first, to compare data collection platforms with regard to feasibility, acceptability and reliability; and second, to provide longitudinal population-based data characterizing seasonal and long-term changes in exposure-related behaviors including food consumption, temporal-spatial activity, and household product use. Results Two cohorts of households were enrolled: families (one parent and one child from northern California and older individuals (age 55+ from central California. Parents (n = 499 in Northern California families were on average 36 years of age, 47.1% were Latino or nonwhite, and 10.2% took the survey in Spanish. Most of the children enrolled (n = 566 were under 6 years (82.7%. The older adults enrolled (n = 156 were, on average, 66 years of age and 23.7% were Latino or nonwhite, but only 2.6% completed the survey in Spanish. Conclusions We found that oversampling was successful in improving recruitment of under-represented subgroups, such as those with low education, thereby increasing diversity of our study sample. Protocols that minimize participant time, e.g., use of bar scanners and scales rather than questionnaires regarding use of household products, and the implementation of these protocols by staff who built relationships of trust, resulted in high retention over a longitudinal data collection scheme. A relatively small fraction of those who volunteer for

Using standardized methods for research on HIV and injecting drug use in developing/transitional countries: case study from the WHO Drug Injection Study Phase II

Directory of Open Access Journals (Sweden)

Stimson Gerry V

2006-03-01

Full Text Available Abstract Background Successful cross-national research requires methods that are both standardized across sites and adaptable to local conditions. We report on the development and implementation of the methodology underlying the survey component of the WHO Drug Injection Study Phase II – a multi-site study of risk behavior and HIV seroprevalence among Injecting Drug Users (IDUs. Methods Standardized operational guidelines were developed by the Survey Coordinating Center in collaboration with the WHO Project Officer and participating site Investigators. Throughout the duration of the study, survey implementation at the local level was monitored by the Coordinating Center. Surveys were conducted in 12 different cities. Prior rapid assessment conducted in 10 cities provided insight into local context and guided survey implementation. Where possible, subjects were recruited both from drug abuse treatment centers and via street outreach. While emphasis was on IDUs, non-injectors were also recruited in cities with substantial non-injecting use of injectable drugs. A structured interview and HIV counseling/testing were administered. Results Over 5,000 subjects were recruited. Subjects were recruited from both drug treatment and street outreach in 10 cities. Non-injectors were recruited in nine cities. Prior rapid assessment identified suitable recruitment areas, reduced drug users' distrust of survey staff, and revealed site-specific risk behaviors. Centralized survey coordination facilitated local questionnaire modification within a core structure, standardized data collection protocols, uniform database structure, and cross-site analyses. Major site-specific problems included: questionnaire translation difficulties; locating affordable HIV-testing facilities; recruitment from drug treatment due to limited/selective treatment infrastructure; access to specific sub-groups of drug users in the community, particularly females or higher income groups

Structural dynamics in LMFBR containment analysis. A brief survey of computational methods and codes

International Nuclear Information System (INIS)

Chang, Y.W.

1977-01-01

This paper gives a brief survey of the computational methods and codes available for LMFBR containment analysis. The various numerical methods commonly used in the computer codes are compared. It provides the reactor engineers to up-to-date information on the development of structural dynamics in LMFBR containment analysis. It can also be used as a basis for the selection of the numerical method in the future code development. First, the commonly used finite-difference expressions in the Lagrangian codes will be compared. Sample calculations will be used as a basis for discussing and comparing the accuracy of the various finite-difference representations. The distortion of the meshes will also be compared; the techniques used for eliminating the numerical instabilities will be discussed and compared using examples. Next, the numerical methods used in the Eulerian formulation will be compared, first among themselves and then with the Lagrangian formulations. Special emphasis is placed on the effect of mass diffusion of the Eulerian calculation on the propagation of discontinuities. Implicit and explicit numerical integrations will be discussed and results obtained from these two techniques will be compared. Then, the finite-element methods are compared with the finite-difference methods. The advantages and disadvantages of the two methods will be discussed in detail, together with the versatility and ease of application of the method to containment analysis having complex geometries. It will also be shown that the finite-element equations for a constant-pressure fluid element is identical to the finite-difference equations using contour integrations. Finally, conclusions based on this study will be given

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of the total phosphorus by a Kjeldahl digestion method and an automated colorimetric finish that includes dialysis

Science.gov (United States)

Patton, Charles J.; Truitt, Earl P.

1992-01-01

A method to determine total phosphorus (TP) in the same digests prepared for total Kjeldahl nitrogen (TKN) determinations is desribed. The batch, high-temperature (block digester), HG(II)-catalyzed digestion step is similar to U.S. Geological Survey methods I-2552-85/I-4552-85 and U.S. Environmental Protection Agency method 365.4 except that sample and reagent volumes are halved. Prepared digests are desolvated at 220 degrees Celsius and digested at 370 degrees Celsius in separate block digesters set at these temperatures, rather than in a single, temperature-programmed block digester. This approach is used in the method escribed here, which permits 40 calibrants, reference waters, and smaples to be digested and resolvated in about an hour. Orthophosphate ions originally present in samples, along with those released during the digestion step, are determined colorimetrically at a rate of 90 tests per hour by an automated version of the phosphoantimonylmolybdenum blue procedure. About 100 microliters of digest are required per determination. The upper concentration limit is 2 milligrams per liter (mg/L) with a method detection limt of 0.01 mg/L. Repeatability for a sample containing approximately 1.6 mg/L of TP in a high suspended-solids matrix is 0.7 percent. Between-day precision for the same sample is 5.0 percent. A dialyzer in the air-segmented continuous flow analyzer provides on-line digest cleanup, eliminated particulates that otherwise would interfere in the colorimetric finish. An single-channel analyzer can process the resolvated digests from two pairs of block digesters each hour. Paired t-test analysis of TP concentrations for approximately 1,600 samples determined by the new method (U.S. Geologial Survey methods I-2610-91 and I-4610-91) and the old method (U.S. Geological Survey methods I-2600-85 and I-4600-85) revealed positive bias in the former of 0.02 to 0.04 mg/L for surface-water samples in agreement with previous studies. Concentrations of total

The Use of Tools, Modelling Methods, Data Types, and Endpoints in Systems Medicine: A Survey on Projects of the German e:Med-Programme.

Science.gov (United States)

Gietzelt, Matthias; Höfer, Thomas; Knaup-Gregori, Petra; König, Rainer; Löpprich, Martin; Poos, Alexandra; Ganzinger, Matthias

2016-01-01

Systems medicine is the consequent continuation of research efforts on the road to an individualized medicine. Thereby, systems medicine tries to offer a holistic view on the patient by combining different data sources to highlight different perspectives on the patient's health. Our research question was to identify the main data types, modelling methods, analysis tools, and endpoints currently used and studied in systems medicine. Therefore, we conducted a survey on projects with a systems medicine background. Fifty participants completed this survey. The results of the survey were analyzed using histograms and cross tables, and finally compared to results of a former literature review with the same research focus. The data types reported in this survey were widely diversified. As expected, genomic and phenotype data were used most frequently. In contrast, environmental and behavioral data were rarely used in the projects. Overall, the cross tables of the data types in the survey and the literature review showed overlapping results.

Sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants: A case study in Rwanda.

Science.gov (United States)

Lu, Chunling; Liu, Kai; Li, Lingling; Yang, Yuhong

2017-04-01

Reliable and comparable information on households with catastrophic health expenditure (HCHE) is crucial for monitoring and evaluating our progress towards achieving universal financial risk protection. This study aims to investigate the sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants. Using the Rwanda Integrated Living Conditions Survey in 2005 and 2010/2011, we derived the level and trend of the percentage of the HCHE using out-of-pocket health spending data derived from (1) a health module with a two-week recall period and six (2005)/seven (2010/2011) survey questions (Method 1) and (2) a consumption module with a four-week/ten-/12-month recall period and 11(2005)/24 (2010/2011) questions (Method 2). Using multilevel logistic regression analysis, we investigated the household socioeconomic and demographic characteristics that affected the sensitivity of estimating the HCHE to survey design. We found that Method 1 generated a significantly higher HCHE estimate (9.2%, 95% confidence interval 8.4%-10.0%) than Method2 (7.4%, 6.6%-8.1%) in 2005 and lower estimate (5.6%, 5.2%-6.1%) than Method 2 (8.2%, 7.6%-8.7%) in 2010/2011. The estimated trends of the HCHE using the two methods were not consistent between the two years. A household's size, its income quintile, having no under-five children, and educational level of its head were positively associated with the consistency of its HCHE status when using the two survey methods. Estimates of the progress in financial risk protection, especially among the most vulnerable households, are sensitive to survey design. These results are robust to various thresholds of catastrophic health spending. Future work must focus on mitigating survey effects through the development of statistical tools. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Influence of Fees on Supervision of Licensed Professional Counselor Interns in Texas: A Mixed-Methods Study

Science.gov (United States)

Stark, Marcella Dortch

2010-01-01

Purpose. The purpose of this study was to explore the influence of payment status on perceptions of Licensed Professional Counselor (LPC) Interns regarding aspects of the supervisory relationship. Method. Survey responses from 230 LPC Interns in Texas were collected using SurveyMonkey[TM] (2009) to examine how supervision fees influence: (a)…

Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

Science.gov (United States)

Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

1982-01-01

This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

Research Note: A time and motion study for two vegetation survey ...

African Journals Online (AJOL)

African Journal of Range and Forage Science ... Linear regressions of species number versus time taken for the beginning and middle and end of the survey data sets were generated for both methods with correlation coefficients (r) of 0.900 ...

A Survey of Formal Methods for Intelligent Swarms

Science.gov (United States)

Truszkowski, Walt; Rash, James; Hinchey, Mike; Rouff, Chrustopher A.

2004-01-01

cutting edge in system correctness, and requires higher levels of assurance than other (traditional) missions that use a single or small number of spacecraft that are deterministic in nature and have near continuous communication access. One of the highest possible levels of assurance comes from the application of formal methods. Formal methods are mathematics-based tools and techniques for specifying and verifying (software and hardware) systems. They are particularly useful for specifying complex parallel systems, such as exemplified by the ANTS mission, where the entire system is difficult for a single person to fully understand, a problem that is multiplied with multiple developers. Once written, a formal specification can be used to prove properties of a system (e.g., the underlying system will go from one state to another or not into a specific state) and check for particular types of errors (e.g., race or livelock conditions). A formal specification can also be used as input to a model checker for further validation. This report gives the results of a survey of formal methods techniques for verification and validation of space missions that use swarm technology. Multiple formal methods were evaluated to determine their effectiveness in modeling and assuring the behavior of swarms of spacecraft using the ANTS mission as an example system. This report is the first result of the project to determine formal approaches that are promising for formally specifying swarm-based systems. From this survey, the most promising approaches were selected and are discussed relative to their possible application to the ANTS mission. Future work will include the application of an integrated approach, based on the selected approaches identified in this report, to the formal specification of the ANTS mission.

Feasibility of identifying families for genetic studies of birth defects using the National Health Interview Survey

Directory of Open Access Journals (Sweden)

Nolan Vikki G

2004-05-01

Full Text Available Abstract Background The purpose of this study was to determine whether the National Health Interview Survey is a useful source to identify informative families for genetic studies of birth defects. Methods The 1994/1995 National Health Interview Survey (NHIS was used to identify households where individuals with two or more birth defects reside. Four groups of households were identified: 1 single non-familial (one individual with one birth defect; 2 single familial (more than one individual with one birth defect; 3 multiple non-familial (one individual with more than one birth defect, and 4 multiple familial (more than one individual with more than one birth defect. The March 2000 U.S. Census on households was used to estimate the total number of households in which there are individuals with birth defects. Results Of a total of 28,094 households and surveyed about birth defects and impairments, 1,083 single non-familial, 55 multiple non-familial, 54 single familial, and 8 multiple familial households were identified. Based on the 2000 U.S. census, it is estimated that there are 4,472,385 households where at least one person has one birth defect in the United States and in 234,846 of them there are at least two affected individuals. Western states had the highest prevalence rates. Conclusions Population-based methods, such as the NHIS, are modestly useful to identify the number and the regions where candidate families for genetic studies of birth defects reside. Clinic based studies and birth defects surveillance systems that collect family history offer better probability of ascertainment.

A survey of national and multi-national registries and cohort studies in juvenile idiopathic arthritis: Challenges and opportunities

NARCIS (Netherlands)

Beukelman, T. (Timothy); J. Anink (Janneke); Berntson, L. (Lillemor); Duffy, C. (Ciaran); J.A. Ellis; Glerup, M. (Mia); Guzman, J. (Jaime); G. Horneff (Gerd); Kearsley-Fleet, L. (Lianne); Klein, A. (Ariane); Klotsche, J. (Jens); Magnusson, B. (Bo); K. Minden (Kirsten); Munro, J.E. (Jane E.); Niewerth, M. (Martina); Nordal, E. (Ellen); N. Ruperto (Nicolino); Santos, M.J. (Maria Jose); Schanberg, L.E. (Laura E.); W. Thomson (Wendy); L.W.A. van Suijlekom-Smit (Lisette); N.M. Wulffraat (Nico); Hyrich, K. (Kimme)

2017-01-01

textabstractBackground: To characterize the existing national and multi-national registries and cohort studies in juvenile idiopathic arthritis (JIA) and identify differences as well as areas of potential future collaboration. Methods: We surveyed investigators from North America, Europe, and

A method to automate the radiological survey process

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.

1987-01-01

This document describes the USRAD system, a hardware/software ranging and data transmission system, that provides real-time position data and combines it with other portable instrument measurements. Live display of position data and onsite data reduction, presentation, and formatting for reports and automatic transfer into databases are among the unusual attributes of USRADS. Approximately 25% of any survey-to-survey report process is dedicated to data recording and formatting, which is eliminated by USRADS. Cost savings are realized by the elimination of manual transcription of instrument readout in the field and clerical formatting of data in the office. Increased data reliability is realized by ensuring complete survey coverage of an area in the field, by elimination of mathematical errors in conversion of instrument readout to unit concentration, and by elimination of errors associated with transcribing data from the field into report format. The USRAD system can be adapted to measure other types of pollutants or physical/chemical/geological/biological conditions in which portable instrumentation exists. 2 refs., 2 figs

Qualitative to quantitative: linked trajectory of method triangulation in a study on HIV/AIDS in Goa, India.

Science.gov (United States)

Bailey, Ajay; Hutter, Inge

2008-10-01

With 3.1 million people estimated to be living with HIV/AIDS in India and 39.5 million people globally, the epidemic has posed academics the challenge of identifying behaviours and their underlying beliefs in the effort to reduce the risk of HIV transmission. The Health Belief Model (HBM) is frequently used to identify risk behaviours and adherence behaviour in the field of HIV/AIDS. Risk behaviour studies that apply HBM have been largely quantitative and use of qualitative methodology is rare. The marriage of qualitative and quantitative methods has never been easy. The challenge is in triangulating the methods. Method triangulation has been largely used to combine insights from the qualitative and quantitative methods but not to link both the methods. In this paper we suggest a linked trajectory of method triangulation (LTMT). The linked trajectory aims to first gather individual level information through in-depth interviews and then to present the information as vignettes in focus group discussions. We thus validate information obtained from in-depth interviews and gather emic concepts that arise from the interaction. We thus capture both the interpretation and the interaction angles of the qualitative method. Further, using the qualitative information gained, a survey is designed. In doing so, the survey questions are grounded and contextualized. We employed this linked trajectory of method triangulation in a study on the risk assessment of HIV/AIDS among migrant and mobile men. Fieldwork was carried out in Goa, India. Data come from two waves of studies, first an explorative qualitative study (2003), second a larger study (2004-2005), including in-depth interviews (25), focus group discussions (21) and a survey (n=1259). By employing the qualitative to quantitative LTMT we can not only contextualize the existing concepts of the HBM, but also validate new concepts and identify new risk groups.

Fingertip Amputation Treatment: A Survey Study.

Science.gov (United States)

Miller, Andrew J; Rivlin, Michael; Kirkpatrick, William; Abboudi, Jack; Jones, Christopher

2015-09-01

Distal fingertip amputations are common injuries in work- and non-work-related accidents. There is a paucity of evidence to support use of any one treatment. We conducted a study to better understand how surgeon and patient factors influence the treatment preferences for distal fingertip amputations among a cross section of US and international hand surgeons. We sent a 16-question survey to the American Association for Hand Surgery and reciprocal international hand societies and analyzed the response data using a logistic regression model. We hypothesized that hand surgeons' treatment preferences would be varied and influenced by surgeon and patient demographics. One hundred ninety-eight hand surgeons (62% US, 38% international) responded to the survey. For each clinical scenario (Allen levels 2, 3, and 4 and volar oblique amputations), there were wide variations in treatment preferences. Wound care was less likely performed by surgeons with more than 30 years of experience or plastic surgery backgrounds. Replantation was less likely performed by US surgeons and private practice surgeons. Pedicle and homodigital flaps were more commonly performed internationally. Surgeons in practice for less than 5 years were more likely to perform skeletal shortening. For all levels and orientations of fingertip amputation queried, there is a wide range of treatment preferences. Our survey results highlight the need for a prospective randomized trial to elucidate the most effective treatments for fingertip amputations.

Results of a survey on accident and safety analysis codes, benchmarks, verification and validation methods

International Nuclear Information System (INIS)

Lee, A.G.; Wilkin, G.B.

1995-01-01

This report is a compilation of the information submitted by AECL, CIAE, JAERI, ORNL and Siemens in response to a need identified at the 'Workshop on R and D Needs' at the IGORR-3 meeting. The survey compiled information on the national standards applied to the Safety Quality Assurance (SQA) programs undertaken by the participants. Information was assembled for the computer codes and nuclear data libraries used in accident and safety analyses for research reactors and the methods used to verify and validate the codes and libraries. Although the survey was not comprehensive, it provides a basis for exchanging information of common interest to the research reactor community

A survey of national and multi-national registries and cohort studies in juvenile idiopathic arthritis : challenges and opportunities

NARCIS (Netherlands)

Beukelman, Timothy; Anink, Janneke; Berntson, Lillemor; Duffy, Ciaran; Ellis, Justine A; Glerup, Mia; Guzman, Jaime; Horneff, Gerd; Kearsley-Fleet, Lianne; Klein, Ariane; Klotsche, Jens; Magnusson, Bo; Minden, Kirsten; Munro, Jane E; Niewerth, Martina; Nordal, Ellen; Ruperto, Nicolino; Santos, Maria Jose; Schanberg, Laura E; Thomson, Wendy; van Suijlekom-Smit, Lisette; Wulffraat, Nico; Hyrich, Kimme

2017-01-01

BACKGROUND: To characterize the existing national and multi-national registries and cohort studies in juvenile idiopathic arthritis (JIA) and identify differences as well as areas of potential future collaboration. METHODS: We surveyed investigators from North America, Europe, and Australia about

Optical study of the DAFT/FADA galaxy cluster survey

Science.gov (United States)

Martinet, N.; Durret, F.; Clowe, D.; Adami, C.

2013-11-01

DAFT/FADA (Dark energy American French Team) is a large survey of ˜90 high redshift (0.42×10^{14} M_{⊙}) clusters with HST weak lensing oriented data, plus BVRIZJ 4m ground based follow up to compute photometric redshifts. The main goals of this survey are to constrain dark energy parameters using weak lensing tomography and to study a large homogeneous sample of high redshift massive clusters. We will briefly review the latest results of this optical survey, focusing on two ongoing works: the calculation of galaxy luminosity functions from photometric redshift catalogs and the weak lensing analysis of ground based data.

Underwater sediment-contact radiation survey method

International Nuclear Information System (INIS)

Lee, D.R.; St. Aubin, M.; Welch, S.J.

1991-01-01

The authors are striving to produce a practical system for mapping lateral distributions in gamma activity on submerged sediments. This is in response to the need for quality control and interpretation of data obtainable by sediment sampling and analyses near nuclear utilities. A prototype gamma probe has been constructed and tested. The prototype is essentially a background survey meter packaged in a 53-cm-long x 5.4-cm-diam waterproof vehicle. This usage-shaped vehicle is connected to a cable for towing in contact with bottom sediments of lakes, rivers, and coastal waters. This vehicle, or sediment probe as it is called, was initially developed for measuring sediment electrical conductances, a parameter that can be used to locate underwater areas of groundwater and contaminant upwelling. During towing, the probe does not roll or twist around its longitudinal axis by more than 10 deg, so that sensors, which have been fixed within the vehicle, can be oriented to look up, down, or sideways. In over 450 lin-km of underwater survey, only a single sediment probe has been irretrievably snagged on sunken rocks or other debris. Work in the Ottawa River near the Chalk River Laboratories has shown good agreement among point measurements of river sediment with continuous measurements using the moving probe

Mixed Method Study Examines Undergraduate Student Researchers’ Knowledge and Perceptions About Scholarly Communication Practices

Directory of Open Access Journals (Sweden)

Melissa Goertzen

2017-09-01

Full Text Available A Review of: Riehle, C. F., & Hensley, M. K. (2017. What do undergraduate students know about scholarly communication?: A mixed methods study. Portal: Libraries and the Academy, 17(1, 145–178. http://dx.doi.org/10.1353/pla.2017.0009 Abstract Objective – To examine undergraduate student researchers’ perception and understanding of scholarly communication practices and issues. Design – Mixed method study involving a survey and semi-structured interviews. Setting – Two major undergraduate universities in the Midwest region of the United States. Subjects – Undergraduate students who participated in or had completed undergraduate research experiences with faculty mentors. Method – The method was first approved by Institutional Review Board offices at both campuses involved in the study. Then, students received invitations to participate in a survey via email (Campus 1 = 221 students; Campus 2 = 345 students. Identical online surveys ran separately on each campus; both remained open for a period of three weeks. All respondents received a reminder email one week before the survey closed. Participants answered twelve questions related to demographics and scholarly communication practices. The survey examined knowledge and experience across five areas: the peer review process, author and publisher rights, publication and access models, impact of research, and data management. All students who completed the survey were entered in a drawing for a $50 Amazon card. The response rates were 34.8% (Campus 1 and 18.6% (Campus 2. Surveys on both campuses were administered using different software: campus 1 utilized Qualtrics survey software while campus 2 used an institution-specific survey software. Data sets were normed and merged later in the study to enable comparison and identify broad themes. Survey respondents were also invited to participate in a 15 to 20 minute follow-up interview and were compensated with a $20 Amazon gift card. The

Method and Mchievement of Survey and Evaluation of Groundwater Resources of Guangzhou City

Science.gov (United States)

Lin, J.

2017-12-01

Based on the documents and achievements relevant to hydrogeological surveying and mapping of 1:100000, hydrogeological drilling, pumping test and dynamic monitoring of groundwater level in Guangzhou, considering the hydrogeological conditions of Guangzhou and combining the advanced technologies such as remote sensing, the survey and evaluation of the volume of the groundwater resources of Guangzhou was carried out in plain and mountain areas separately. The recharge method was used to evaluate the volume of groundwater resources in plain areas, meanwhile, the output volume and the storage change volume of groundwater were calculated and the volume of groundwater resources was corrected by water balance analysis; while the discharge method was used to evaluated the volume of groundwater resources in mountain areas. The result of survey and evaluation indicates that: the volume of the natural groundwater resources in Guangzhou City is 1.83 billion m3 of which the groundwater replenishment quantity in plain areas is 510,045,000 m3, with a total output of 509,729,000 m3, an absolute balance difference of 316,000 m3 and a relative balance difference of 0.062%; the volume of groundwater resources in mountain areas is 1,358,208,000 m3 including the river basic flow is 965,054,000 m3; the repetitive counted volume of groundwater resources in both plain areas and mountain areas is 38,839,000 m3. This work was realized by refined means for the first time to entirely find out the volume of groundwater resources of Guangzhou City and the law of their distribution so as to lay an important foundation for the protection and reasonable development and exploration of the groundwater resources of Guangzhou City.

A Study of Quasar Selection in the Supernova Fields of the Dark Energy Survey

International Nuclear Information System (INIS)

Tie, S. S.; Martini, P.; Mudd, D.; Ostrovski, F.; Reed, S. L.

2017-01-01

In this paper, we present a study of quasar selection using the supernova fields of the Dark Energy Survey (DES). We used a quasar catalog from an overlapping portion of the SDSS Stripe 82 region to quantify the completeness and efficiency of selection methods involving color, probabilistic modeling, variability, and combinations of color/probabilistic modeling with variability. In all cases, we considered only objects that appear as point sources in the DES images. We examine color selection methods based on the Wide-field Infrared Survey Explorer (WISE) mid-IR W1-W2 color, a mixture of WISE and DES colors (g - i and i-W1), and a mixture of Vista Hemisphere Survey and DES colors (g - i and i - K). For probabilistic quasar selection, we used XDQSO, an algorithm that employs an empirical multi-wavelength flux model of quasars to assign quasar probabilities. Our variability selection uses the multi-band χ"2-probability that sources are constant in the DES Year 1 griz-band light curves. The completeness and efficiency are calculated relative to an underlying sample of point sources that are detected in the required selection bands and pass our data quality and photometric error cuts. We conduct our analyses at two magnitude limits, i 85% for both i-band magnitude limits and efficiencies of >80% to the bright limit and >60% to the faint limit; however, the giW1 and giW1+variability methods give the highest quasar surface densities. The XDQSOz method and combinations of W1W2/giW1/XDQSOz with variability are among the better selection methods when both high completeness and high efficiency are desired. We also present the OzDES Quasar Catalog of 1263 spectroscopically confirmed quasars from three years of OzDES observation in the 30 deg"2 of the DES supernova fields. Finally, the catalog includes quasars with redshifts up to z ~ 4 and brighter than i = 22 mag, although the catalog is not complete up to this magnitude limit.

Survey of meshless and generalized finite element methods: A unified approach

Science.gov (United States)

Babuška, Ivo; Banerjee, Uday; Osborn, John E.

In the past few years meshless methods for numerically solving partial differential equations have come into the focus of interest, especially in the engineering community. This class of methods was essentially stimulated by difficulties related to mesh generation. Mesh generation is delicate in many situations, for instance, when the domain has complicated geometry; when the mesh changes with time, as in crack propagation, and remeshing is required at each time step; when a Lagrangian formulation is employed, especially with nonlinear PDEs. In addition, the need for flexibility in the selection of approximating functions (e.g., the flexibility to use non-polynomial approximating functions), has played a significant role in the development of meshless methods. There are many recent papers, and two books, on meshless methods; most of them are of an engineering character, without any mathematical analysis.In this paper we address meshless methods and the closely related generalized finite element methods for solving linear elliptic equations, using variational principles. We give a unified mathematical theory with proofs, briefly address implementational aspects, present illustrative numerical examples, and provide a list of references to the current literature.The aim of the paper is to provide a survey of a part of this new field, with emphasis on mathematics. We present proofs of essential theorems because we feel these proofs are essential for the understanding of the mathematical aspects of meshless methods, which has approximation theory as a major ingredient. As always, any new field is stimulated by and related to older ideas. This will be visible in our paper.

A Survey of Current and Projected Ethical Dilemmas of Rehabilitation Counselors

Science.gov (United States)

Hartley, Michael T.; Cartwright, Brenda Y.

2016-01-01

Purpose: This study surveyed current and projected ethical dilemmas of rehabilitation counselors. Method: As a mixed-methods approach, the study used both quantitative and qualitative analyses. Results: Of the 211 participants who completed the survey, 116 (55.0%) reported an ethical dilemma. Based on the descriptions, common themes involved roles…

A Survey of Medical Oncology Training in Australian Medical Schools: Pilot Study

Science.gov (United States)

George, Mathew; Prawira, Amy

2017-01-01

Background Oncology is a rapidly evolving field with continuous advancements in the diagnosis and treatment of cancer. Therefore, it is important that medical students are provided with the knowledge and experience required to care for oncology patients and enable them to diagnose and manage toxicities of novel therapeutic agents. Objective This study was performed to understand the medical students’ perspective of the oncology education provided in universities across Australia and identify areas of education that could potentially be modified or improved to ultimately attract more students to a career in oncology. Methods This pilot cross-sectional study consisted of an 18-question survey that was submitted online to medical students in their final year and interns rotating to the Tamworth Hospital. Results The survey was completed by 94 fifth-year medical students and interns. Oncology was taught both theoretically and clinically for 68% (63/93) of participants, and 48% (44/92) had an exclusive oncology rotation. Both theoretical and clinical oncology assessments were conducted for only 21% (19/92) of participants. Overall, 42% (38/91) of participants were satisfied with their oncology education, and 78% (40/51) were dissatisfied with the number of oncology teaching hours. The importance of a career in oncology was rated as low by 46% (41/90) of participants. Conclusions This pilot study indicates that there are potential areas to improve oncology teaching in Australian universities. The majority of surveyed students were dissatisfied with the number of teaching hours they receive in oncology. More global assessment of students and/or interns from other Australian institutes may yield further useful information. PMID:29233799

Implementation of a Computerized Tablet-Survey in an Adolescent Large-Scale, School-Based Study.

Science.gov (United States)

Delk, Joanne; Harrell, Melissa B; Fakhouri, Tala H I; Muir, Katelyn A; Perry, Cheryl L

2017-07-01

Computerized surveys present many advantages over paper surveys. However, school-based adolescent research questionnaires still mainly rely on paper-and-pencil surveys as access to computers in schools is often not practical. Tablet-assisted self-interviews (TASI) present a possible solution, but their use is largely untested. This paper presents a method for and our experiences with implementing a TASI in a school setting. A TASI was administered to 3907 middle and high school students from 79 schools. The survey assessed use of tobacco products and exposure to tobacco marketing. To assess in-depth tobacco use behaviors, the TASI employed extensive skip patterns to reduce the number of not-applicable questions that nontobacco users received. Pictures were added to help respondents identify the tobacco products they were being queried about. Students were receptive to the tablets and required no instructions in their use. None were lost, stolen, or broken. Item nonresponse, unanswered questions, was a pre-administration concern; however, 92% of participants answered 96% or more of the questions. This method was feasible and successful among a diverse population of students and schools. It generated a unique dataset of in-depth tobacco use behaviors that would not have been possible through a paper-and-pencil survey. © 2017, American School Health Association.

Comparison of two dietary assessment methods by food consumption: results of the German National Nutrition Survey II.

Science.gov (United States)

Eisinger-Watzl, Marianne; Straßburg, Andrea; Ramünke, Josa; Krems, Carolin; Heuer, Thorsten; Hoffmann, Ingrid

2015-04-01

To further characterise the performance of the diet history method and the 24-h recalls method, both in an updated version, a comparison was conducted. The National Nutrition Survey II, representative for Germany, assessed food consumption with both methods. The comparison was conducted in a sample of 9,968 participants aged 14-80. Besides calculating mean differences, statistical agreement measurements encompass Spearman and intraclass correlation coefficients, ranking participants in quartiles and the Bland-Altman method. Mean consumption of 12 out of 18 food groups was higher assessed with the diet history method. Three of these 12 food groups had a medium to large effect size (e.g., raw vegetables) and seven showed at least a small strength while there was basically no difference for coffee/tea or ice cream. Intraclass correlations were strong only for beverages (>0.50) and revealed the least correlation for vegetables (diet history method to remember consumption of the past 4 weeks may be a source of inaccurateness, especially for inhomogeneous food groups. Additionally, social desirability gains significance. There is no assessment method without errors and attention to specific food groups is a critical issue with every method. Altogether, the 24-h recalls method applied in the presented study, offers advantages approximating food consumption as compared to the diet history method.

Attitudes toward plagiarism among pharmacy and medical biochemistry students – cross-sectional survey study

OpenAIRE

Pupovac, Vanja; Bilic-Zulle, Lidija; Mavrinac, Martina; Petrovecki, Mladen

2010-01-01

Introduction: Plagiarism is one of the most frequent and serious forms of misconduct in academic environment. The cross-sectional survey study was done with aim to explore the attitudes toward plagiarism. Materials and methods: First year students of Faculty of Pharmacy and Medical Biochemistry, University of Zagreb, Croatia (N = 146) were anonymously tested using Attitude toward Plagiarism (ATP) questionnaire. The questionnaire is composed of 29 statements on a 5 point Likert scale, (1 - ...

A study of the responses of neutron dose equivalent survey meters with computer codes

International Nuclear Information System (INIS)

Sartori, D.E.; Beer, G.P. de

1983-01-01

The ANISN and DOT discrete-ordinates radiation transport codes for one and two dimensions have been proved as effective and simple techniques to study the response of dose equivalent neutron detectors. Comparisons between results of an experimental calibration of the Harwell 95/0075 survey meter and calculated results rendered satisfactory agreement, considering the different techniques and sources of error involved. Possible improvements in the methods and designs and causes of error are discussed. (author)

A detailed survey of numerical methods for unconstrained minimization. Pt. 1

International Nuclear Information System (INIS)

Mika, K.; Chaves, T.

1980-01-01

A detailed description of numerical methods for unconstrained minimization is presented. This first part surveys in particular conjugate direction and gradient methods, whereas variable metric methods will be the subject of the second part. Among the results of special interest we quote the following. The conjugate direction methods of Powell, Zangwill and Sutti can be best interpreted if the Smith approach is adopted. The conditions for quadratic termination of Powell's first procedure are analyzed. Numerical results based on nonlinear least squares problems are presented for the following conjugate direction codes: VA04AD from Harwell Subroutine Library and ZXPOW from IMSL, both implementations of Powell's second procedure, DFMND from IBM-SILMATH (Zangwill's method) and Brent's algorithm PRAXIS. VA04AD turns out to be superior in all cases, PRAXIS improves for high-dimensional problems. All codes clearly exhibit superlinear convergence. Akaike's result for the method of steepest descent is derived directly from a set of nonlinear recurrence relations. Numerical results obtained with the highly ill conditioned Hilbert function confirm the theoretical predictions. Several properties of the conjugate gradient method are presented and a new derivation of the equivalence of steepest descent partan and the CG method is given. A comparison of numerical results from the CG codes VA08AD (Fletcher-Reeves), DFMCG (the SSP version of the Fletcher-Reevens algorithm) and VA14AD (Powell's implementation of the Polak-Ribiere formula) reveals that VA14AD is clearly superior in all cases, but that the convergence rate of these codes is only weakly superlinear such that high accuracy solutions require extremely large numbers of function calls. (orig.)

Quality Control in Survey Design: Evaluating a Survey of Educators’ Attitudes Concerning Differentiated Compensation

OpenAIRE

Kelly D. Bradley; Michael Peabody; Shannon O. Sampson

2015-01-01

This study utilized the Rasch model to assess the quality of a survey instrument designed to measure attitudes of administrators and teachers concerning a differentiated teacher compensation program piloted in Kentucky.  Researchers addressing potentially contentious issues should ensure their methods stand up to rigorous criticism.  The results indicate that the rating scale does not function as expected, with items being too easy to endorse.  Future iterations of this survey should be revis...

Optimizing Methods of Obtaining Stellar Parameters for the H3 Survey

Science.gov (United States)

Ivory, KeShawn; Conroy, Charlie; Cargile, Phillip

2018-01-01

The Stellar Halo at High Resolution with Hectochelle Survey (H3) is in the process of observing and collecting stellar parameters for stars in the Milky Way's halo. With a goal of measuring radial velocities for fainter stars, it is crucial that we have optimal methods of obtaining this and other parameters from the data from these stars.The method currently developed is The Payne, named after Cecilia Payne-Gaposchkin, a code that uses neural networks and Markov Chain Monte Carlo methods to utilize both spectra and photometry to obtain values for stellar parameters. This project was to investigate the benefit of fitting both spectra and spectral energy distributions (SED). Mock spectra using the parameters of the Sun were created and noise was inserted at various signal to noise values. The Payne then fit each mock spectrum with and without a mock SED also generated from solar parameters. The result was that at high signal to noise, the spectrum dominated and the effect of fitting the SED was minimal. But at low signal to noise, the addition of the SED greatly decreased the standard deviation of the data and resulted in more accurate values for temperature and metallicity.

The Cases of the European Values Study and the European Social Survey

DEFF Research Database (Denmark)

Kropp, Kristoffer

2017-01-01

institutions, had ties to the EU, and used survey techniques to address urgent contemporary political and social problems. Despite their similarities, the surveys represent two rather different constellations of social science knowledge production. The EVS emerged from a coalition of Catholic-oriented agents...... continued to play a significant role in its constellation. The ESS grew out of a scientific and technical aspiration among wellconnected and recognised Western European social scientists. It emphasised rigourous methods and drew on its founding agents’ close relations with European institutions...

Usage of CISS and Conlon surveys in eye accommodation studies

Science.gov (United States)

Panke, Karola; Svede, Aiga; Jaschinski, Wolfgang; Krumina, Gunta

2017-08-01

To date, there is no assessment of more than one survey used for a clinical research study that address subjects with and without symptoms related to accommodative or binocular vision disorders. Thus, the purpose of this study was to investigate two different surveys - CISS and Conlon for the same subject group and analyse also critical visual function parameters. Monocular and binocular accommodative response for 20 subjects was measured for dominant eye with openfield infrared autorefractometer (Shin-Nippon SRW-5000) at three distances (24 cm, 30 cm and 40 cm). Subjects were divided into symptomatic and asymptomatic group using cut off score 21 for CISS and 20 for Conlon survey. We found positive exponential growth relationship between CISS and Conlon scores (R² = 0.7), but separation between symptomatic and asymptomatic group differed significantly depending on which survey was used. We found positive correlation between Conlon score and exophoria at 30 cm (r=0.41, p=0.01) and 24 cm (r=0.27, p=0.03). Relationship between subjective symptoms and following clinical parameters - accommodation lag (r accommodation (r convergence near point (r = 0.26, p < 0.05) were not significant. Our results confirmed that using different subjective symptom surveys can provide different results within the same subject group, therefore we recommend to use surveys as a part of case history and tool to measure patient satisfaction and results of treatment effectiveness instead of using them for clinical trials as a criteria to divide symptomatic and asymptomatic group.

Distribution of gamma-ray dose rate in Fukushima prefecture by a car-borne survey method

International Nuclear Information System (INIS)

Sugihara, Shinji; Momoshima, Noriyuki; Maekawa, Akihiro; Ichikawa, Ryohei; Kawamura, Hidehisa

2013-01-01

The Tohoku Pacific Earthquake and Tsunami on March 11, 2011, caused severe damage to the TEPCO Fukushima Dai-ichi NPP. This was followed by a nuclear accident at an unprecedented scale, and huge amounts of radioactive material were released into the environment. The distributions of the gamma-ray dose rate in Fukushima prefecture were measured using a NaI(Tl) scintillation survey meter as part of a car-borne survey method on April 18-21, June 20-22, October 18-21, 2011, and on April 9-11 and July 30 - August 1, 2012. The dose rate near TEPCO Fukushima Dai-ichi NPP and at Iitate-mura, Fukushima-city was high (1 to >30 μSv/h). (author)

Impact of the Medical Faculty on Study Success in Freiburg: Results from Graduate Surveys

Directory of Open Access Journals (Sweden)

Biller, Silke

2015-10-01

Full Text Available Aim: Using the data from graduate surveys, this study aims to analyze which factors related to teaching and learning at the Freiburg Faculty of Medicine can influence study success.Background: Study success and the factors influencing it have long been the subject of investigation, with study success being measured in terms of easily quantifiable indicators (final grades, student satisfaction, etc.. In recent years, it has also frequently been assessed in terms of graduate competency levels. Graduate surveys are considered suitable instruments for measuring these dimensions of study success.Method: Data from three Freiburg graduate surveys conducted one and a half years after graduation were drawn upon for the analysis.Study success was operationalized using four indicators: results on the written section of the M2 exam, self-assessment of medical expertise and scientific expertise, and student satisfaction. Using multiple regression analyses, the predictive power was calculated for selected variables, also measured by the graduate surveys, for the different study success indicators.Results: It was possible to identify models that contribute slightly or moderately to the prediction of study success. The score earned on the university entrance qualification demonstrated itself to be the strongest predictor for forecasting the M2 written exam: R is between 0.08 and 0.22 for the three surveys. Different variables specific to degree program structure and teaching are helpful for predicting medical expertise (R=0.04-0.32 and student satisfaction (R=0.12-0.35. The two variables, and , show themselves to be significant, sample-invariant predictors (β-weight=0.21-0.58, β-weight=0.27-0.56. For scientific expertise, no sample-independent predictors could be determined.Conclusion: Factors describing teaching hardly provide any assistance when predicting the written M2 exam score, which makes sense to the extent that teaching goes far beyond the heavily

Global pathways to men's caregiving: mixed methods findings from the International Men and Gender Equality Survey and the Men Who Care study.

Science.gov (United States)

Kato-Wallace, Jane; Barker, Gary; Eads, Marci; Levtov, Ruti

2014-01-01

Promoting men's participation in unpaid care work is part of the Programme of Action for the International Conference on Population and Development. However, men's involvement in care work does not mirror the advances women have made in paid work outside the home. This mixed method study explores which men are more involved in caregiving, and what childhood and adulthood factors influence their level of involvement. Quantitative research presents findings from 1169 men across six countries with children aged 0-4, and a qualitative study presents findings from in-depth interviews with 83 men engaged in atypical caregiving practices. Survey research finds that being taught to care for children, witnessing one's father take care of one's siblings, respondents' present attitudes about gender equality and having outside help (or none, in some cases) were all also associated with men's higher level of involvement. Qualitative research reveals that men's experiences of violence, the normalisation of domestic work as children and life circumstances rather than greater-than-average beliefs in gender equality all propelled them into care work. Findings suggest that engaging more men into care work implies changes to policies and structural realities in the workplace coupled with changing gender attitudes. These insights inform policy and practice aimed at promoting greater involvement in care work by men.

The Global Survey Method Applied to Ground-level Cosmic Ray Measurements

Science.gov (United States)

Belov, A.; Eroshenko, E.; Yanke, V.; Oleneva, V.; Abunin, A.; Abunina, M.; Papaioannou, A.; Mavromichalaki, H.

2018-04-01

The global survey method (GSM) technique unites simultaneous ground-level observations of cosmic rays in different locations and allows us to obtain the main characteristics of cosmic-ray variations outside of the atmosphere and magnetosphere of Earth. This technique has been developed and applied in numerous studies over many years by the Institute of Terrestrial Magnetism, Ionosphere and Radiowave Propagation (IZMIRAN). We here describe the IZMIRAN version of the GSM in detail. With this technique, the hourly data of the world-wide neutron-monitor network from July 1957 until December 2016 were processed, and further processing is enabled upon the receipt of new data. The result is a database of homogeneous and continuous hourly characteristics of the density variations (an isotropic part of the intensity) and the 3D vector of the cosmic-ray anisotropy. It includes all of the effects that could be identified in galactic cosmic-ray variations that were caused by large-scale disturbances of the interplanetary medium in more than 50 years. These results in turn became the basis for a database on Forbush effects and interplanetary disturbances. This database allows correlating various space-environment parameters (the characteristics of the Sun, the solar wind, et cetera) with cosmic-ray parameters and studying their interrelations. We also present features of the coupling coefficients for different neutron monitors that enable us to make a connection from ground-level measurements to primary cosmic-ray variations outside the atmosphere and the magnetosphere. We discuss the strengths and weaknesses of the current version of the GSM as well as further possible developments and improvements. The method developed allows us to minimize the problems of the neutron-monitor network, which are typical for experimental physics, and to considerably enhance its advantages.

Mechanical ventilators availability survey in Thai ICUs (ICU-RESOURCE I Study).

Science.gov (United States)

Chittawatanarat, Kaweesak; Bunburaphong, Thananchai; Champunot, Ratapum

2014-01-01

Mechanical ventilators (MV) have been progressing rapidly. New ventilator modes and supportive equipments have been developed. However; the MV status in Thai ICUs was not available. The objective of this report was to describe the MV supply and availability in Thai ICUs and review some important characteristics regarding of the availability of MV MATERIAL AND METHOD: The ICU RESOURCE I study (Mechanical ventilator part) database was used in the present study. Hospital types, MV brands and models were recorded. Statistically significant differences between and among groups were defined as p-value ventilators were also a high proportion of the MVs in Thai ICUs. Bennette and Hamilton were the most highly available MVin this survey. Advanced MV models were more available in academic ICUs (Thai Clinical Trial Registry: TCTR-201200005).

Survey and evaluation of aging risk assessment methods and applications

International Nuclear Information System (INIS)

Sanzo, D.; Kvam, P.; Apostolakis, G.; Wu, J.; Milici, T.; Ghoniem, N.; Guarro, S.

1994-11-01

The US Nuclear Regulatory Commission initiated the nuclear power plant aging research program about 6 years ago to gather information about nuclear power plant aging. Since then, this program has collected a significant amount of information, largely qualitative, on plant aging and its potential effects on plant safety. However, this body of knowledge has not yet been integrated into formalisms that can be used effectively and systematically to assess plant risk resulting from aging, although models for assessing the effect of increasing failure rates on core damage frequency have been proposed. This report surveys the work on the aging of systems, structures, and components (SSCs) of nuclear power plants, as well as associated data bases. We take a critical look at the need to revise probabilistic risk assessments (PRAs) so that they will include the contribution to risk from plant aging, the adequacy of existing methods for evaluating this contribution, and the adequacy of the data that have been used in these evaluation methods. We identify a preliminary framework for integrating the aging of SSCs into the PRA and include the identification of necessary data for such an integration

Wastewater Treatment Anaerobic Digester Foaming Prevention and Control Methods - Literature Review and Survey - Full-Scale Studies (WERF Report INFR1SG10)

Science.gov (United States)

This project addresses the issue of anaerobic digester (AD) foaming in different water resource recovery facilities (WRRFs). This two-volume report is a compilation of an AD foaming literature review, a plant survey, and findings from full-scale studies. The literature review hel...

Mapping neighborhood scale survey responses with uncertainty metrics

Directory of Open Access Journals (Sweden)

Charles Robert Ehlschlaeger

2016-12-01

Full Text Available This paper presents a methodology of mapping population-centric social, infrastructural, and environmental metrics at neighborhood scale. This methodology extends traditional survey analysis methods to create cartographic products useful in agent-based modeling and geographic information analysis. It utilizes and synthesizes survey microdata, sub-upazila attributes, land use information, and ground truth locations of attributes to create neighborhood scale multi-attribute maps. Monte Carlo methods are employed to combine any number of survey responses to stochastically weight survey cases and to simulate survey cases' locations in a study area. Through such Monte Carlo methods, known errors from each of the input sources can be retained. By keeping individual survey cases as the atomic unit of data representation, this methodology ensures that important covariates are retained and that ecological inference fallacy is eliminated. These techniques are demonstrated with a case study from the Chittagong Division in Bangladesh. The results provide a population-centric understanding of many social, infrastructural, and environmental metrics desired in humanitarian aid and disaster relief planning and operations wherever long term familiarity is lacking. Of critical importance is that the resulting products have easy to use explicit representation of the errors and uncertainties of each of the input sources via the automatically generated summary statistics created at the application's geographic scale.

Focusing on What Counts: Using Exploratory Focus Groups to Enhance the Development of an Electronic Survey in a Mixed-Methods Research Design

Science.gov (United States)

Galliott, Natal'ya; Graham, Linda J.

2016-01-01

This paper illustrates the use of exploratory focus groups to inform the development of a survey instrument in a sequential phase mixed-methods study investigating differences in secondary students' career choice capability. Five focus groups were conducted with 23 Year 10 students in the state of New South Wales, Australia. Analysis of the focus…

Predicting survey responses: how and why semantics shape survey statistics on organizational behaviour.

Directory of Open Access Journals (Sweden)

Jan Ketil Arnulf

Full Text Available Some disciplines in the social sciences rely heavily on collecting survey responses to detect empirical relationships among variables. We explored whether these relationships were a priori predictable from the semantic properties of the survey items, using language processing algorithms which are now available as new research methods. Language processing algorithms were used to calculate the semantic similarity among all items in state-of-the-art surveys from Organisational Behaviour research. These surveys covered areas such as transformational leadership, work motivation and work outcomes. This information was used to explain and predict the response patterns from real subjects. Semantic algorithms explained 60-86% of the variance in the response patterns and allowed remarkably precise prediction of survey responses from humans, except in a personality test. Even the relationships between independent and their purported dependent variables were accurately predicted. This raises concern about the empirical nature of data collected through some surveys if results are already given a priori through the way subjects are being asked. Survey response patterns seem heavily determined by semantics. Language algorithms may suggest these prior to administering a survey. This study suggests that semantic algorithms are becoming new tools for the social sciences, opening perspectives on survey responses that prevalent psychometric theory cannot explain.

Statistics available for site studies in registers and surveys at Statistics Sweden

Energy Technology Data Exchange (ETDEWEB)

Haldorson, Marie [Statistics Sweden, Oerebro (Sweden)

2000-03-01

undertaking future site studies. SCB can contribute competence to help SKB choose the right variables from the various registers and find the right method (if required) for making use of variables that come from surveys.

Statistics available for site studies in registers and surveys at Statistics Sweden

International Nuclear Information System (INIS)

Haldorson, Marie

2000-03-01

site studies. SCB can contribute competence to help SKB choose the right variables from the various registers and find the right method (if required) for making use of variables that come from surveys

Statistics available for site studies in registers and surveys at Statistics Sweden

Energy Technology Data Exchange (ETDEWEB)

Haldorson, Marie [Statistics Sweden, Oerebro (Sweden)

2000-03-01

site studies. SCB can contribute competence to help SKB choose the right variables from the various registers and find the right method (if required) for making use of variables that come from surveys.

Survey of Machine Learning Methods for Database Security

Science.gov (United States)

Kamra, Ashish; Ber, Elisa

Application of machine learning techniques to database security is an emerging area of research. In this chapter, we present a survey of various approaches that use machine learning/data mining techniques to enhance the traditional security mechanisms of databases. There are two key database security areas in which these techniques have found applications, namely, detection of SQL Injection attacks and anomaly detection for defending against insider threats. Apart from the research prototypes and tools, various third-party commercial products are also available that provide database activity monitoring solutions by profiling database users and applications. We present a survey of such products. We end the chapter with a primer on mechanisms for responding to database anomalies.

Professional identity, career choices, and working conditions of future and young dentists in Germany - study design and methods of a nationwide comprehensive survey.

Science.gov (United States)

Kettler, Nele; Frenzel Baudisch, Nicolas; Micheelis, Wolfgang; Klingenberger, David; Jordan, A Rainer

2017-10-18

Little is known regarding young and future dentists' career choices, professional identity, and working conditions in Germany. While the dental healthcare environment and demands in treatment are changing, it remains unclear what job perceptions young dentists have developed at the beginning of their work life and if and how these perceptions change during the subsequent years. The aim of this study was to survey future and young dentists regarding their professional identity, planned career paths, and working conditions and strains to understand career decisions and choices and enable policy makers to include future dentists' views and expectations in their decisions. This study is a longitudinal nationwide survey over a time span of 4 years of dental students and young dentists in Germany and is comprised of three waves. The first wave focuses on dental students in their final year before the state examination and is composed of a qualitative pre-study in the form of focus groups and a quantitative main survey in the form of a questionnaire. The end points were established to analyse (1) the professional identity of the young future dentists; (2) their career paths, preparation for a career, and basic career conditions; and (3) perceived conditions and strains. The aim of the overall survey was to depict the development of these three aspects during the first years of work life. All of the questions were evaluated with a descriptive univariate analysis. The analysed subgroups were grouped according to gender, target working condition (employed/self-employed), and primary socialisation (parents dentists/parents not dentists). To our knowledge, this is the only study which focuses on career choices, professional identity, and working conditions of future and young dentists in Germany. The longitudinal observation provides information that is essential for professional and purposive dental health care planning, and to meet the oral health demands and needs of the

Plane and geodetic surveying

CERN Document Server

Johnson, Aylmer

2014-01-01

IntroductionAim And ScopeClassification Of SurveysThe Structure Of This BookGeneral Principles Of SurveyingErrorsRedundancyStiffnessAdjustmentPlanning And Record KeepingPrincipal Surveying ActivitiesEstablishing Control NetworksMappingSetting OutResectioningDeformation MonitoringAngle MeasurementThe Surveyor's CompassThe ClinometerThe Total StationMaking ObservationsChecks On Permanent AdjustmentsDistance MeasurementGeneralTape MeasurementsOptical Methods (Tachymetry)Electromagnetic Distance Measurement (EDM)Ultrasonic MethodsGNSSLevellingTheoryThe InstrumentTechniqueBookingPermanent Adjustmen

A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

DEFF Research Database (Denmark)

Hertz, Kristian

2000-01-01

constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

APPLICATION OF PARAMETER CONTINUATION METHOD FOR INVESTIGATION OF VIBROIMPACT SYSTEMS DYNAMIC BEHAVIOUR. PROBLEM STATE. SHORT SURVEY OF WORLD SCIENTIFIC LITERATURE

Directory of Open Access Journals (Sweden)

V.A. Bazhenov

2014-12-01

Full Text Available Authors in their works study vibroimpact system dynamic behaviour by numerical parametric continuation technique combined with shooting and Newton-Raphson’s methods. The technique is adapted to two-mass two-degree-of-freedom vibroimpact system under periodic excitation. Impact is simulated by nonlinear contact interaction force based on Hertz’s contact theory. Stability or instability of obtained periodic solutions is determined by monodromy matrix eigenvalues (multipliers based on Floquet’s theory. In the present paper we describe the state of problem of parameter continuation method using for nonlinear tasks solution. Also we give the short survey of numerous contemporary literature in English and Russian about parameter continuation method application for nonlinear problems. This method is applied for vibroimpact problem solving more rarely because of the difficulties connected with repeated impacts.

Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

Directory of Open Access Journals (Sweden)

Antimo Barbato

2014-09-01

Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

Primordial non-Gaussianity from LAMOST surveys

International Nuclear Information System (INIS)

Gong Yan; Wang Xin; Chen Xuelei; Zheng Zheng

2010-01-01

The primordial non-Gaussianity (PNG) in the matter density perturbation is a very powerful probe of the physics of the very early Universe. The local PNG can induce a distinct scale-dependent bias on the large scale structure distribution of galaxies and quasars, which could be used for constraining it. We study the detection limits of PNG from the surveys of the LAMOST telescope. The cases of the main galaxy survey, the luminous red galaxy (LRG) survey, and the quasar survey of different magnitude limits are considered. We find that the Main1 sample (i.e. the main galaxy survey which is one magnitude deeper than the SDSS main galaxy survey, or r NL are |f NL | NL | NL | is between 50 and 103, depending on the magnitude limit of the survey. With Planck-like priors on cosmological parameters, the quasar survey with g NL | < 43 (2σ). We also discuss the possibility of further tightening the constraint by using the relative bias method proposed by Seljak.

Geological survey by high resolution electrical survey on granite areas

International Nuclear Information System (INIS)

Sugimoto, Yoshihiro; Yamada, Naoyuki

2002-03-01

As an Integral part of the geological survey in 'The study of the regions ground water flow system' that we are carrying out with Tono Geoscience Center, we proved the relation between the uncontinuation structure such as lineament in the base rock and resistivity structure (resistivity distribution), for the purpose of that confirms the efficacy of the high resolution electrical survey as geological survey, we carried out high resolution electrical survey on granite area. We obtained the following result, by the comparison of resistivity distribution with established geological survey, lineament analysis and investigative drilling. 1. The resistivity structure of this survey area is almost able to classify it into the following four range. 1) the low resistivity range of 50-800 Ωm, 2) The resistivity range like the middle of 200-2000 Ωm, 3) The high resistivity range of 2000 Ωm over, 4) The low resistivity range of depth of the survey line 400-550 section. 2. The low resistivity range of 4) that correspond with the established geological data is not admitted. 3. It was confirmed that resistivity structure almost correspond to geological structure by the comparison with the established data. 4. The small-scale low resistivity area is admitted in the point equivalent to the lineament position of established. 5. We carried out it with the simulation method about the low resistivity range of 4). As a result, it understood that it has the possibility that the narrow ratio low resistivity area is shown as the wide ratio resistivity range in the analysis section. In the survey in this time, it is conceivable that the resistivity distribution with the possibility of the unhomogeneous and uncontinuation structure of the base rock is being shown conspicuously, the efficacy of the high resolution resistivity survey as geological survey on granite was shown. (author)

Studies by the U.S. Geological Survey in Alaska, 2011

Science.gov (United States)

Dumoulin, Julie A.; Dusel-Bacon, Cynthia

2012-01-01

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of "online only" versions of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Studies by the U.S. Geological Survey in Alaska, 2007

Science.gov (United States)

Haeussler, Peter J.; Galloway, John P.

2009-01-01

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of 'online only' versions of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Application of magnetotelluric method to hydrocarbon exploration. Case study of MT survey in Yurihara oil and gas field, Akita prefecture; MT ho no kokunai sekiyu tanko eno tekiyo. Akitaken Yurihara chiiki ni okeru jikken chosa kekka

Energy Technology Data Exchange (ETDEWEB)

Mitsuhata, Y; Matsuo, K; Ishikawa, H; Tanaka, H; Nakagami, K [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

1996-10-01

The experiment and survey were carried out to verify the effectiveness and limitation of MT method. The previous seismic reflection method is unsuitable for steep terrain and over-folded complicated geological structure. In such difficult areas, application of MT method is increasing as complement or substitution for the reflection method. However, the evaluation of resistivity structure interpretation for every area is slightly difficult because of lack of data, poor quality of data, and no verification data at boreholes. Consequently, the survey was again carried out in well-known Yurihara oil and gas field, Akita prefecture whose geological structure has been surveyed in detail at boreholes, by adding new 32 sites, 22 sites on the south side and 10 sites on the north side of the measuring line extending from east to west. As a result, it was clarified that the lower high-resistivity layer found by MT method is equal to the Nishikurosawa basaltic layer, and basalt extends to the west in the north area. This result can`t be simply compared with the previous geological profile. 8 refs., 8 figs.

Women's access needs in maternity care in rural Tasmania, Australia: a mixed methods study.

Science.gov (United States)

Hoang, Ha; Le, Quynh; Terry, Daniel

2014-03-01

This study investigates (i) maternity care access issues in rural Tasmania, (ii) rural women's challenges in accessing maternity services and (iii) rural women's access needs in maternity services. A mixed-method approach using a survey and semi-structured interviews was conducted. The survey explored women's views of rural maternity services from antenatal to postnatal care, while interviews reinforced the survey results and provided insights into the access issues and needs of women in maternity care. The survey was completed by n=210 women, with a response rate of 35%, with n=22 follow-up interviews being conducted. The survey indicated the majority of rural women believed antenatal education and check-ups and postnatal check-ups should be provided locally. The majority of women surveyed also believed in the importance of having a maternity unit in the local hospital, which was further iterated and clarified within the interviews. Three main themes emerged from the interview data, namely (i) lack of access to maternity services, (ii) difficulties in accessing maternity services, and (iii) rural women's access needs. The study suggested that women's access needs are not fully met in some rural areas of Tasmania. Rural women face many challenges when accessing maternity services, including financial burden and risk of labouring en route. The study supports the claim that the closure of rural maternity units shifts cost and risk from the health care system to rural women and their families. Copyright © 2013 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

A meta-study investigating the sources of protest behaviour in stated preference surveys

DEFF Research Database (Denmark)

Meyerhoff, Jürgen; Mørkbak, Morten; Olsen, Søren Bøye

, then simply expelling protesters from surveys can lead to sample selection bias. Furthermore, WTP estimates will not be comparable across surveys. This paper seeks to explore potential causes of protest behaviour through a meta-study based on data from 40 different surveys. The objective of the study...... is to examine the effect of respondent specific variables as well as survey specific variables on protest behaviour. Our results suggest that some of the differences in WTP typically observed between different demographic groups, different elicitation formats and different question formats might actually...

A meta-study investigating the sources of protest behaviour in stated preference surveys

DEFF Research Database (Denmark)

Meyerhoff, Jürgen; Mørkbak, Morten Raun; Olsen, Søren Bøye

2014-01-01

characteristics, then simply expelling protesters from surveys can lead to sample selection bias. Furthermore, WTP estimates will not be comparable across surveys. This paper seeks to explore potential causes of protest behaviour through a meta-study based on full datasets from 38 different surveys. The objective...... of the study is to examine the effect of respondent specific variables as well as survey specific variables on protest behaviour. Our results suggest that some of the differences in WTP typically observed between different demographic groups, different elicitation formats and different question formats might...

A survey on the regional characteristics of public's nuclear recognition

International Nuclear Information System (INIS)

Ohnishi, Teruaki; Okada, Osami; Tsujimoto, Tadashi

2001-03-01

Public opinion surveys were carried out to clarify the difference of nuclear perception of the public dwelling near the region of nuclear power station and the public in the urban region. A simulation model using the data obtained up to this time was developed to make clear the regional dependence of the public's perception of nuclear energy, and the secular variation of public opinion for nuclear energy corresponding to the two regions cited above was numerically studied by this model. In our surveys, a convenient method using the Internet, together with the ordinary mailing method were adopted to compare the two types of data thus obtained by the different methods and to study the feasibility of the Internet method. The questionnaires in these surveys are, for instance, the extent of the public recognition of energy in general and nuclear energy, the recognition of inhabitant's poll, and the public's attitude to the mass media, with the objective region of Reinan in Fukui prefecture and the urban region in Kinki district for the case of mailing method, and the whole region in our country for the Internet method. By the simulation model of multi-particle type with the input data obtained by our surveys, the behavior of secular variation of nuclear opinion and the effect of PA activity were numerically studied. The present status of public perception and recognition of nuclear energy became clear as a result of our surveys. It was found that the Internet is a quite useful mean to carry out the opinion survey with a low cost in a short time, and that the multi-particle model can be a useful tool to numerically evaluate the effect of PA activity. (author)

Updating and testing of a Finnish method for mixed municipal solid waste composition studies.

Science.gov (United States)

Liikanen, M; Sahimaa, O; Hupponen, M; Havukainen, J; Sorvari, J; Horttanainen, M

2016-06-01

More efficient recycling of municipal solid waste (MSW) is an essential precondition for turning Europe into a circular economy. Thus, the recycling of MSW must increase significantly in several member states, including Finland. This has increased the interest in the composition of mixed MSW. Due to increased information needs, a method for mixed MSW composition studies was introduced in Finland in order to improve the national comparability of composition study results. The aim of this study was to further develop the method so that it corresponds to the information needed about the composition of mixed MSW and still works in practice. A survey and two mixed MSW composition studies were carried out in the study. According to the responses of the survey, the intensification of recycling, the landfill ban on organic waste and the producer responsibility for packaging waste have particularly influenced the need for information about the composition of mixed MSW. The share of biowaste in mixed MSW interested the respondents most. Additionally, biowaste proved to be the largest waste fraction in mixed MSW in the composition studies. It constituted over 40% of mixed MSW in both composition studies. For these reasons, the classification system of the method was updated by further defining the classifications of biowaste. The classifications of paper as well as paperboard and cardboard were also updated. The updated classification system provides more information on the share of avoidable food waste and waste materials suitable for recycling in mixed MSW. The updated method and the information gained from the composition studies are important in ensuring that the method will be adopted by municipal waste management companies and thus used widely in Finland. Copyright © 2016 Elsevier Ltd. All rights reserved.

Survey research.

Science.gov (United States)

Alderman, Amy K; Salem, Barbara

2010-10-01

Survey research is a unique methodology that can provide insight into individuals' perspectives and experiences and can be collected on a large population-based sample. Specifically, in plastic surgery, survey research can provide patients and providers with accurate and reproducible information to assist with medical decision-making. When using survey methods in research, researchers should develop a conceptual model that explains the relationships of the independent and dependent variables. The items of the survey are of primary importance. Collected data are only useful if they accurately measure the concepts of interest. In addition, administration of the survey must follow basic principles to ensure an adequate response rate and representation of the intended target sample. In this article, the authors review some general concepts important for successful survey research and discuss the many advantages this methodology has for obtaining limitless amounts of valuable information.

Using Social Media and Targeted Snowball Sampling to Survey a Hard-to-reach Population: A Case Study

Directory of Open Access Journals (Sweden)

Gary Dusek

2015-08-01

Full Text Available Response rates to the academic surveys used in quantitative research are decreasing and have been for several decades among both individuals and organizations. Given this trend, providing doctoral students an opportunity to complete their dissertations in a timely and cost effective manner may necessitate identifying more innovative and relevant ways to collect data while maintaining appropriate research standards and rigor. The case of a research study is presented which describes the data collection process used to survey a hard-to-reach population. It details the use of social media, in this case LinkedIn, to facilitate the distribution of the web-based survey. A roadmap to illustrate how this data collection process unfolded is presented, as well as several “lessons learned” during this journey. An explanation of the considerations that impacted the sampling design is provided. The goal of this case study is to provide researchers, including doctoral students, with realistic expectations and an awareness of the benefits and risks associated with the use of this method of data collection.

A field survey on coffee beans drying methods of Indonesian small holder farmers

Science.gov (United States)

Siagian, Parulian; Setyawan, Eko Y.; Gultom, Tumiur; Napitupulu, Farel H.; Ambarita, Himsar

2017-09-01

Drying agricultural product is a post-harvest process that consumes significant energy. It can affect the quality of the product. This paper deals with literature review and field survey of drying methods of coffee beans of Indonesia farmers. The objective is to supply the necessary information on developing continuous solar drier. The results show that intermittent characteristic of sun drying results in a better quality of coffee beans in comparison with constant convective drying. In order to use energy efficiently, the drying process should be divided into several stages. In the first stage when the moist content is high, higher drying air temperature is more effective. After this step, where the moist content is low, lower drying air temperature is better. The field survey of drying coffee beans in Sumatera Utara province reveals that the used drying process is very traditional. It can be divided into two modes and depend on the coffee beans type. The Arabica coffee is firstly fermented and dried to moisture content of 80% using sun drying method, then followed by Green House model of drying up to moisture content about 12%. The latter typically spends 3 days of drying time. On the other hand, The Robusta coffee is dried by exposing to the sun directly without any treatment. After the coffee beans dried follow by peeled process. These findings can be considered to develop a continuous solar drying that suitable for coffee beans drying.

AERIAL RADIOLOGICAL SURVEYS

International Nuclear Information System (INIS)

Proctor, A.E.

1997-01-01

Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described

Questionnaire surveys of dentists on radiology.

Science.gov (United States)

Shelley, A M; Brunton, P; Horner, K

2012-05-01

Survey by questionnaire is a widely used research method in dental radiology. A major concern in reviews of questionnaires is non-response. The objectives of this study were to review questionnaire studies in dental radiology with regard to potential survey errors and to develop recommendations to assist future researchers. A literature search with the software search package PubMed was used to obtain internet-based access to Medline through the website www.ncbi.nlm.nih.gov/pubmed. A search of the English language peer-reviewed literature was conducted of all published studies, with no restriction on date. The search strategy found articles with dates from 1983 to 2010. The medical subject heading terms used were "questionnaire", "dental radiology" and "dental radiography". The reference sections of articles retrieved by this method were hand-searched in order to identify further relevant papers. Reviews, commentaries and relevant studies from the wider literature were also included. 53 questionnaire studies were identified in the dental literature that concerned dental radiography and included a report of response rate. These were all published between 1983 and 2010. In total, 87 articles are referred to in this review, including the 53 dental radiology studies. Other cited articles include reviews, commentaries and examples of studies outside dental radiology where they are germane to the arguments presented. Non-response is only one of four broad areas of error to which questionnaire surveys are subject. This review considers coverage, sampling and measurement, as well as non-response. Recommendations are made to assist future research that uses questionnaire surveys.

Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys.

Science.gov (United States)

Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

2016-09-01

To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. We compared 148 MSM aged 18-64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010-2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%-95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Understanding Sample Surveys: Selective Learning about Social Science Research Methods

Science.gov (United States)

Currin-Percival, Mary; Johnson, Martin

2010-01-01

We investigate differences in what students learn about survey methodology in a class on public opinion presented in two critically different ways: with the inclusion or exclusion of an original research project using a random-digit-dial telephone survey. Using a quasi-experimental design and data obtained from pretests and posttests in two public…

Impact of the Medical Faculty on Study Success in Freiburg: Results from Graduate Surveys

Science.gov (United States)

Biller, Silke; Boeker, Martin; Fabry, Götz; Giesler, Marianne

2015-01-01

Aim: Using the data from graduate surveys, this study aims to analyze which factors related to teaching and learning at the Freiburg Faculty of Medicine can influence study success. Background: Study success and the factors influencing it have long been the subject of investigation, with study success being measured in terms of easily quantifiable indicators (final grades, student satisfaction, etc.). In recent years, it has also frequently been assessed in terms of graduate competency levels. Graduate surveys are considered suitable instruments for measuring these dimensions of study success. Method: Data from three Freiburg graduate surveys conducted one and a half years after graduation were drawn upon for the analysis. Study success was operationalized using four indicators: results on the written section of the M2 exam, self-assessment of medical expertise and scientific expertise, and student satisfaction. Using multiple regression analyses, the predictive power was calculated for selected variables, also measured by the graduate surveys, for the different study success indicators. Results: It was possible to identify models that contribute slightly or moderately to the prediction of study success. The score earned on the university entrance qualification demonstrated itself to be the strongest predictor for forecasting the M2 written exam: R2 is between 0.08 and 0.22 for the three surveys. Different variables specific to degree program structure and teaching are helpful for predicting medical expertise (R2=0.04-0.32) and student satisfaction (R2=0.12-0.35). The two variables, structure and curricular sequencing of the degree program and combination of theory and practice, show themselves to be significant, sample-invariant predictors (β-weightStructure=0.21-0.58, β-weightCombination=0.27-0.56). For scientific expertise, no sample-independent predictors could be determined. Conclusion: Factors describing teaching hardly provide any assistance when

Gotta survey somebody : Methodological challenges in population studies of older people

OpenAIRE

Kelfve, Susanne

2015-01-01

Conducting representative surveys of older people is challenging. This thesis aims to analyze a) the characteristics of individuals at risk of being underrepresented in surveys of older people, b) the systematic errors likely to occur as a result of these selections, and c) whether these systematic errors can be minimized by weighting adjustments.   In Study I, we investigated a) who would be missing from a survey that excluded those living in institutions and that did not use indirect interv...

Editorial summary: findings from a survey on the Danish study progress reform

DEFF Research Database (Denmark)

Sarauw, Laura Louise; Madsen, Simon Ryberg

The summary presents the key findings from the first comprehensive survey of what students expect of the Danish Study Progress Reform. The summarised report is based on a survey conducted among 4.354 university students, who were asked to assess how they expect to manage their time and prioritise...... their activities in light of the Study Progress Reform’s requirements for faster completion. The survey was distributed in April 2015 as part of a politically independent research project funded by the Danish Council for Independent Research/Humanities (FKK)....

Analyzing Repeated Measures Marginal Models on Sample Surveys with Resampling Methods

Directory of Open Access Journals (Sweden)

James D. Knoke

2005-12-01

Full Text Available Packaged statistical software for analyzing categorical, repeated measures marginal models on sample survey data with binary covariates does not appear to be available. Consequently, this report describes a customized SAS program which accomplishes such an analysis on survey data with jackknifed replicate weights for which the primary sampling unit information has been suppressed for respondent confidentiality. First, the program employs the Macro Language and the Output Delivery System (ODS to estimate the means and covariances of indicator variables for the response variables, taking the design into account. Then, it uses PROC CATMOD and ODS, ignoring the survey design, to obtain the design matrix and hypothesis test specifications. Finally, it enters these results into another run of CATMOD, which performs automated direct input of the survey design specifications and accomplishes the appropriate analysis. This customized SAS program can be employed, with minor editing, to analyze general categorical, repeated measures marginal models on sample surveys with replicate weights. Finally, the results of our analysis accounting for the survey design are compared to the results of two alternate analyses of the same data. This comparison confirms that such alternate analyses, which do not properly account for the design, do not produce useful results.

Expert Consensus on Characteristics of Wisdom: A Delphi Method Study

Science.gov (United States)

Jeste, Dilip V.; Ardelt, Monika; Blazer, Dan; Kraemer, Helena C.; Vaillant, George; Meeks, Thomas W.

2010-01-01

Purpose: Wisdom has received increasing attention in empirical research in recent years, especially in gerontology and psychology, but consistent definitions of wisdom remain elusive. We sought to better characterize this concept via an expert consensus panel using a 2-phase Delphi method. Design and Methods: A survey questionnaire comprised 53…

A survey of castration methods and associated livestock management practices performed by bovine veterinarians in the United States.

Science.gov (United States)

Coetzee, Johann F; Nutsch, Abbey L; Barbur, Laura A; Bradburn, Ryan M

2010-03-03

Castration of male calves destined for beef production is a common management practice performed in the United States amounting to approximately 15 million procedures per year. Societal concern about the moral and ethical treatment of animals is increasing. Therefore, production agriculture is faced with the challenge of formulating animal welfare policies relating to routine management practices such as castration. To enable the livestock industry to effectively respond to these challenges there is a need for more data on management practices that are commonly used in cattle production systems. The objective of this survey was to describe castration methods, adverse events and husbandry procedures performed by U.S. veterinarians at the time of castration. Invitations to participate in the survey were sent to email addresses of 1,669 members of the American Association of Bovine Practitioners and 303 members of the Academy of Veterinary Consultants. After partially completed surveys and missing data were omitted, 189 responses were included in the analysis. Surgical castration with a scalpel followed by testicular removal by twisting (calves 90 kg) was the most common method of castration used. The potential risk of injury to the operator, size of the calf, handling facilities and experience with the technique were the most important considerations used to determine the method of castration used. Swelling, stiffness and increased lying time were the most prevalent adverse events observed following castration. One in five practitioners report using an analgesic or local anesthetic at the time of castration. Approximately 90% of respondents indicated that they vaccinate and dehorn calves at the time of castration. Over half the respondents use disinfectants, prophylactic antimicrobials and tetanus toxoid to reduce complications following castration. The results of this survey describe current methods of castration and associated management practices employed by

A survey of castration methods and associated livestock management practices performed by bovine veterinarians in the United States

Directory of Open Access Journals (Sweden)

Bradburn Ryan M

2010-03-01

Full Text Available Abstract Background Castration of male calves destined for beef production is a common management practice performed in the United States amounting to approximately 15 million procedures per year. Societal concern about the moral and ethical treatment of animals is increasing. Therefore, production agriculture is faced with the challenge of formulating animal welfare policies relating to routine management practices such as castration. To enable the livestock industry to effectively respond to these challenges there is a need for more data on management practices that are commonly used in cattle production systems. The objective of this survey was to describe castration methods, adverse events and husbandry procedures performed by U.S. veterinarians at the time of castration. Invitations to participate in the survey were sent to email addresses of 1,669 members of the American Association of Bovine Practitioners and 303 members of the Academy of Veterinary Consultants. Results After partially completed surveys and missing data were omitted, 189 responses were included in the analysis. Surgical castration with a scalpel followed by testicular removal by twisting (calves 90 kg was the most common method of castration used. The potential risk of injury to the operator, size of the calf, handling facilities and experience with the technique were the most important considerations used to determine the method of castration used. Swelling, stiffness and increased lying time were the most prevalent adverse events observed following castration. One in five practitioners report using an analgesic or local anesthetic at the time of castration. Approximately 90% of respondents indicated that they vaccinate and dehorn calves at the time of castration. Over half the respondents use disinfectants, prophylactic antimicrobials and tetanus toxoid to reduce complications following castration. Conclusions The results of this survey describe current methods of

Indications and organisational methods for autologous blood transfusion procedures in Italy: results of a national survey.

Science.gov (United States)

Catalano, Liviana; Campolongo, Alessandra; Caponera, Maurizio; Berzuini, Alessandra; Bontadini, Andrea; Furlò, Giuseppe; Pasqualetti, Patrizio; Liumbruno, Giancarlo M

2014-10-01

Pre-operative donation of autologous blood is a practice that is now being abandoned. Alternative methods of transfusing autologous blood, other than predeposited blood, do however play a role in limiting the need for transfusion of allogeneic blood. This survey of autologous blood transfusion practices, promoted by the Italian Society of Transfusion Medicine and Immunohaematology more than 2 years after the publication of national recommendations on the subject, was intended to acquire information on the indications for predeposit in Italy and on some organisational aspects of the alternative techniques of autotransfusion. A structured questionnaire consisting of 22 questions on the indications and organisational methods of autologous blood transfusion was made available on a web platform from 15 January to 15 March, 2013. The 232 Transfusion Services in Italy were invited by e-mail to complete the online survey. Of the 232 transfusion structures contacted, 160 (69%) responded to the survey, with the response rate decreasing from the North towards the South and the Islands. The use of predeposit has decreased considerably in Italy and about 50% of the units collected are discarded because of lack of use. Alternative techniques (acute isovolaemic haemodilution and peri-operative blood salvage) are used at different frequencies across the country. The data collected in this survey can be considered representative of national practice; they show that the already very limited indications for predeposit autologous blood transfusion must be adhered to even more scrupulously, also to avoid the notable waste of resources due to unused units.Users of alternative autotransfusion techniques must be involved in order to gain a full picture of the degree of use of such techniques; multidisciplinary agreement on the indications for their use is essential in order for these indications to have an effective role in "patient blood management" programmes.

Survey of the status of finite element methods for partial differential equations

Science.gov (United States)

Temam, Roger

1986-01-01

The finite element methods (FEM) have proved to be a powerful technique for the solution of boundary value problems associated with partial differential equations of either elliptic, parabolic, or hyperbolic type. They also have a good potential for utilization on parallel computers particularly in relation to the concept of domain decomposition. This report is intended as an introduction to the FEM for the nonspecialist. It contains a survey which is totally nonexhaustive, and it also contains as an illustration, a report on some new results concerning two specific applications, namely a free boundary fluid-structure interaction problem and the Euler equations for inviscid flows.

A comparative study of traditional lecture methods and interactive lecture methods in introductory geology courses for non-science majors at the college level

Science.gov (United States)

Hundley, Stacey A.

In recent years there has been a national call for reform in undergraduate science education. The goal of this reform movement in science education is to develop ways to improve undergraduate student learning with an emphasis on developing more effective teaching practices. Introductory science courses at the college level are generally taught using a traditional lecture format. Recent studies have shown incorporating active learning strategies within the traditional lecture classroom has positive effects on student outcomes. This study focuses on incorporating interactive teaching methods into the traditional lecture classroom to enhance student learning for non-science majors enrolled in introductory geology courses at a private university. Students' experience and instructional preferences regarding introductory geology courses were identified from survey data analysis. The information gained from responses to the questionnaire was utilized to develop an interactive lecture introductory geology course for non-science majors. Student outcomes were examined in introductory geology courses based on two teaching methods: interactive lecture and traditional lecture. There were no significant statistical differences between the groups based on the student outcomes and teaching methods. Incorporating interactive lecture methods did not statistically improve student outcomes when compared to traditional lecture teaching methods. However, the responses to the survey revealed students have a preference for introductory geology courses taught with lecture and instructor-led discussions and students prefer to work independently or in small groups. The results of this study are useful to individuals who teach introductory geology courses and individuals who teach introductory science courses for non-science majors at the college level.

CHAracteristics of research studies that iNfluence practice: a GEneral survey of Canadian orthopaedic Surgeons (CHANGES): a pilot survey.

Science.gov (United States)

de Sa, Darren; Thornley, Patrick; Evaniew, Nathan; Madden, Kim; Bhandari, Mohit; Ghert, Michelle

2015-01-01

Evidence Based Medicine (EBM) is increasingly being applied to inform clinical decision-making in orthopaedic surgery. Despite the promotion of EBM in Orthopaedic Surgery, the adoption of results from high quality clinical research seems highly unpredictable and does not appear to be driven strictly by randomized trial data. The objective of this study was to pilot a survey to determine if we could identify surgeon opinions on the characteristics of research studies that are perceived as being most likely to influence clinical decision-making among orthopaedic surgeons in Canada. A 28-question electronic survey was distributed to active members of the Canadian Orthopaedic Association (COA) over a period of 11 weeks. The questionnaire sought to analyze the influence of both extrinsic and intrinsic characteristics of research studies and their potential to influence practice patterns. Extrinsic factors included the perceived journal quality and investigator profiles, economic impact, peer/patient/industry influence and individual surgeon residency/fellowship training experiences. Intrinsic factors included study design, sample size, and outcomes reported. Descriptive statistics are provided. Of the 109 members of the COA who opened the survey, 95 (87%) completed the survey in its entirety. The overall response rate was 11% (95/841). Surgeons achieved consensus on the influence of three key designs on their practices: 1) randomized controlled trials 94 (99%), 2) meta-analysis 83 (87%), and 3) systematic reviews 81 (85%). Sixty-seven percent of surgeons agreed that studies with sample sizes of 101-500 or more were more likely to influence clinical practice than smaller studies (n = design influencing adoption included 1) reputation of the investigators (99%) and 2) perceived quality of the journal (75%). Although study design and sample size (i.e. minimum of 100 patients) have some influence on clinical decision making, surgeon respondents are equally influenced

Alternative methods for developing external travel survey data.

Science.gov (United States)

2010-10-01

The Texas Department of Transportation (TxDOT) has a comprehensive on-going travel survey : program that supports the travel demand models being developed for transportation planning efforts in urban : areas throughout Texas. One component of the sur...

Study of depression influencing factors with zero-inflated regression models in a large-scale population survey

OpenAIRE

Xu, Tao; Zhu, Guangjin; Han, Shaomei

2017-01-01

Objectives The number of depression symptoms can be considered as count data in order to get complete and accurate analyses findings in studies of depression. This study aims to compare the goodness of fit of four count outcomes models by a large survey sample to identify the optimum model for a risk factor study of the number of depression symptoms. Methods 15 820 subjects, aged 10 to 80 years old, who were not suffering from serious chronic diseases and had not run a high fever in the past ...

Survey of industry methods for producing highly reliable software

International Nuclear Information System (INIS)

Lawrence, J.D.; Persons, W.L.

1994-11-01

The Nuclear Reactor Regulation Office of the US Nuclear Regulatory Commission is charged with assessing the safety of new instrument and control designs for nuclear power plants which may use computer-based reactor protection systems. Lawrence Livermore National Laboratory has evaluated the latest techniques in software reliability for measurement, estimation, error detection, and prediction that can be used during the software life cycle as a means of risk assessment for reactor protection systems. One aspect of this task has been a survey of the software industry to collect information to help identify the design factors used to improve the reliability and safety of software. The intent was to discover what practices really work in industry and what design factors are used by industry to achieve highly reliable software. The results of the survey are documented in this report. Three companies participated in the survey: Computer Sciences Corporation, International Business Machines (Federal Systems Company), and TRW. Discussions were also held with NASA Software Engineering Lab/University of Maryland/CSC, and the AIAA Software Reliability Project

An enhanced sine dwell method as applied to the Galileo core structure modal survey

Science.gov (United States)

Smith, Kenneth S.; Trubert, Marc

1990-01-01

An incremental modal survey performed in 1988 on the core structure of the Galileo spacecraft with its adapters with the purpose of assessing the dynamics of the new portions of the structure is considered. Emphasis is placed on the enhancements of the sine dwell method employed in the test. For each mode, response data is acquired at 32 frequencies in a narrow band enclosing the resonance, utilizing the SWIFT technique. It is pointed out that due to the simplicity of the data processing involved, the diagnostic and modal-parameter data is available within several minutes after data acquisition; however, compared with straight curve-fitting approaches, the method requires more time for data acquisition.

Cross-continental comparison of national food consumption survey methods--a narrative review

Science.gov (United States)

Food consumption surveys are performed in many countries. Comparison of results from those surveys across nations is difficult because of differences in methodological approaches. While consensus about the preferred methodology associated with national food consumption surveys is increasing, no in...

Application of multivariate statistical methods in analyzing expectation surveys in Central Bank of Nigeria

OpenAIRE

Raymond, Ogbuka Obinna

2017-01-01

In analyzing survey data, most researchers and analysts make use of statistical methods with straight forward statistical approaches. More common, is the use of one‐way, two‐way or multi‐way tables, and graphical displays such as bar charts, line charts, etc. A brief overview of these approaches and a good discussion on aspects needing attention during the data analysis process can be found in Wilson & Stern (2001). In most cases however, analysis procedures that go beyond simp...

Catalytic Enzyme-Based Methods for Water Treatment and Water Distribution System Decontamination. 1. Literature Survey

Science.gov (United States)

2006-06-01

best examples of this is glucose isomerase, which has been used in the commercial production of high fructose corn syrup (HFCS) since 1967.230 Most...EDGEWOOD CHEMICAL BIOLOGICAL CENTER U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ECBC-TR-489 CATALYTIC ENZYME-BASED METHODS FOR WATER ...TREATMENT AND WATER DISTRIBUTION SYSTEM DECONTAMINATION 1. LITERATURE SURVEY Joseph J. DeFrank RESEARCH AND TECHNOLOGY DIRECTORATE June 2006 Approved for

Application of the geological surveying methods employed at Gorleben to cavern projects in the central European zechstein basin

International Nuclear Information System (INIS)

Wilke, F.; Bornemann, O.; Behlau, J.; Mingerzahn, G.

2002-01-01

The investigations at Gorleben date back more than 20 years. New methods were developed and applied, especially for detailed stratigraphic and geochemical characterization of the zechstein formation and also geophysical survey methods and geological mapping of complex folds in saline structures. The greatest feat was the 3D imaging of all geological information accompanied by visualization of complex stratigraphic entities [de

Engineering surveying

CERN Document Server

Schofield, W

2001-01-01

The aim of Engineering Surveying has always been to impart and develop a clear understanding of the basic topics of the subject. The author has fully revised the book to make it the most up-to-date and relevant textbook available on the subject.The book also contains the latest information on trigonometric levelling, total stations and one-person measuring systems. A new chapter on satellites ensures a firm grasp of this vitally important topic.The text covers engineering surveying modules for civil engineering students on degree courses and forms a reference for the engineering surveying module in land surveying courses. It will also prove to be a valuable reference for practitioners.* Simple clear introduction to surveying for engineers* Explains key techniques and methods* Details reading systems and satellite position fixing

A critical review on the reporting of surveys in transdisciplinary research: A case study in Information Systems

Directory of Open Access Journals (Sweden)

Judy van Biljon

2011-12-01

Full Text Available Variability of goals and evolving research methodologies are fundamental characteristics of transdisciplinary research. This integration of research strategies from different fields complicates the evaluation of transdisciplinary research since the variability of goals drives variability of criteria and quality indicators. The aim of this research is to investigate the implications of using research methods across disciplinary boundaries by drilling down into the use of one research strategy in one research context (Information Systems and a related sub-context (Human-Computer Interaction. Surveys with questionnaires as data-capturing tools were selected as an established research method which is widely used in transdisciplinary research. Questionnaires are one of the most established data capturing tools and yet the validity of questionnaire-based findings have often been questioned. The main problem areas have been identified as the sampling of the data, the questionnaire design and the interpretation of the results. This paper looks into questionnaire reporting practices - an essential determinant in the validity and reliability of survey-based research. The field of Information Systems and Human- Computer Interaction has been chosen as the research context. Information Systems research is by nature interdisciplinary in focusing on social and organisational issues regarding the development and use of software in organisations. Human-Computer Interaction studies address the challenges of making computers and computations useful, usable, and universally accessible to humans. Both Information Systems and Human- Computer Interaction studies address complex, heterogeneous, real-world problems, thereby meeting the first criteria to be classified as transdisciplinary research. The research design entails document analysis of papers presented at conferences in Computer Science and Information Systems over a three-year period to identify trends in the

Getting from neuron to checkmark: Models and methods in cognitive survey research

NARCIS (Netherlands)

Holleman, B.C.; Murre, J.M.J.

2008-01-01

Since the 1980s much work has been done in the field of Cognitive Survey Research. In an interdisciplinary endeavour, survey methodologists and cognitive psychologists (as well as social psychologists and linguists) have worked to unravel the cognitive processes underlying survey responses: to

A comparison of survey methods for documenting presence of Myotis leibii (Eastern Small-Footed Bats) at roosting areas in Western Virginia

Science.gov (United States)

Huth, John K.; Silvis, Alexander; Moosman, Paul R.; Ford, W. Mark; Sweeten, Sara E.

2015-01-01

Many aspects of foraging and roosting habitat of Myotis leibii (Eastern Small-Footed Bat), an emergent rock roosting-obligate, are poorly described. Previous comparisons of effectiveness of acoustic sampling and mist-net captures have not included Eastern Small-Footed Bat. Habitat requirements of this species differ from congeners in the region, and it is unclear whether survey protocols developed for other species are applicable. Using data from three overlapping studies at two sampling sites in western Virginia’s central Appalachian Mountains, detection probabilities were examined for three survey methods (acoustic surveys with automated identification of calls, visual searches of rock crevices, and mist-netting) for use in the development of “best practices” for future surveys and monitoring. Observer effects were investigated using an expanded version of visual search data. Results suggested that acoustic surveys with automated call identification are not effective for documenting presence of Eastern Small-Footed Bats on talus slopes (basal detection rate of 0%) even when the species is known to be present. The broadband, high frequency echolocation calls emitted by Eastern Small-Footed Bat may be prone to attenuation by virtue of their high frequencies, and these factors, along with signal reflection, lower echolocation rates or possible misidentification to other bat species over talus slopes may all have contributed to poor acoustic survey success. Visual searches and mist-netting of emergent rock had basal detection probabilities of 91% and 75%, respectively. Success of visual searches varied among observers, but detection probability improved with practice. Additionally, visual searches were considerably more economical than mist-netting.

Comparison of methods used for estimating pharmacist counseling behaviors.

Science.gov (United States)

Schommer, J C; Sullivan, D L; Wiederholt, J B

1994-01-01

To compare the rates reported for provision of types of information conveyed by pharmacists among studies for which different methods of estimation were used and different dispensing situations were studied. Empiric studies conducted in the US, reported from 1982 through 1992, were selected from International Pharmaceutical Abstracts, MEDLINE, and noncomputerized sources. Empiric studies were selected for review if they reported the provision of at least three types of counseling information. Four components of methods used for estimating pharmacist counseling behaviors were extracted and summarized in a table: (1) sample type and area, (2) sampling unit, (3) sample size, and (4) data collection method. In addition, situations that were investigated in each study were compiled. Twelve studies met our inclusion criteria. Patients were interviewed via telephone in four studies and were surveyed via mail in two studies. Pharmacists were interviewed via telephone in one study and surveyed via mail in two studies. For three studies, researchers visited pharmacy sites for data collection using the shopper method or observation method. Studies with similar methods and situations provided similar results. Data collected by using patient surveys, pharmacist surveys, and observation methods can provide useful estimations of pharmacist counseling behaviors if researchers measure counseling for specific, well-defined dispensing situations.

Methods and Management of the Healthy Brain Study: A Large Multisite Qualitative Research Project

Science.gov (United States)

Laditka, Sarah B.; Corwin, Sara J.; Laditka, James N.; Liu, Rui; Friedman, Daniela B.; Mathews, Anna E.; Wilcox, Sara

2009-01-01

Purpose of the study: To describe processes used in the Healthy Brain project to manage data collection, coding, and data distribution in a large qualitative project, conducted by researchers at 9 universities in 9 states. Design and Methods: Project management protocols included: (a) managing audiotapes and surveys to ensure data confidentiality,…

Application of QMC methods to PDEs with random coefficients : a survey of analysis and implementation

KAUST Repository

Kuo, Frances

2016-01-05

In this talk I will provide a survey of recent research efforts on the application of quasi-Monte Carlo (QMC) methods to PDEs with random coefficients. Such PDE problems occur in the area of uncertainty quantification. In recent years many papers have been written on this topic using a variety of methods. QMC methods are relatively new to this application area. I will consider different models for the randomness (uniform versus lognormal) and contrast different QMC algorithms (single-level versus multilevel, first order versus higher order, deterministic versus randomized). I will give a summary of the QMC error analysis and proof techniques in a unified view, and provide a practical guide to the software for constructing QMC points tailored to the PDE problems.

[Sex survey research in Germany and Europe : Liebesleben (LoveLives): A pilot study into the sexual experiences, attitudes and relationships of adults in Germany].

Science.gov (United States)

Matthiesen, Silja; Dekker, Arne; von Rueden, Ursula; Winkelmann, Christine; Wendt, Janine; Briken, Peer

2017-09-01

At the Hamburg Institute for Sex Research in Germany, a nationwide study is currently being carried out into the sexual experiences, attitudes and relationships of adults (18-75 years). The main focus of this pilot study is to test the comprehensibility and length of a data collecting instrument as well as the comparison of two data collecting methods with regard to reliability and representativeness of the results as well as of the refusal rate. To this end face-to-face interviews (n = 500) and questionnaires sent by post (n = 500) are to be compared with each other as methods. The data to be collected relates to sexuality, particularly the prevention of HIV and other sexually transmitted infections (STIs). The WHO definition of sexual health forms the basis for the study and thus connects up with the existing sex survey research in Europe and western industrial nations. Comparable surveys have been conducted over the past ten years in more than 30 European countries using a variety of methods. The focus of the study is placed upon the increase that has been observed for several years now in certain STIs. The article provides an overview of existing sex survey research in Europe. It becomes clear that the studies conducted so far are very heterogeneous with regard to chosen method, sampling techniques and the choice of content focus, so that no suitable data for cross-national comparability are currently available.

Survey of seismic fragilities used in PRA studies of nuclear power plants

International Nuclear Information System (INIS)

Park, Y.J.; Hofmayer, C.H.; Chokshi, N.C.

1998-01-01

In recent years, seismic PRA studies have been performed on a large number of nuclear power plants in the USA. This paper presents a summary of a survey on fragility databases and the range of evaluated fragility values of various equipment categories based on past PRAs. The survey includes the use of experience data, the interpretations of available test data, and the quantification of uncertainties. The surveyed fragility databases are limited to data available in the public domain such as NUREG reports, conference proceedings and other publicly available reports. The extent of the availability of data as well as limitations are studied and tabulated for various equipment categories. The survey of the fragility values in past PRA studies includes not only the best estimate values, but also the dominant failure modes and the estimated uncertainty levels for each equipment category. The engineering judgments employed in estimating the uncertainty in the fragility values are also studied. This paper provides a perspective on the seismic fragility evaluation procedures for equipment in order to clearly identify the engineering analysis and judgment used in past seismic PRA studies

PEP surveying procedures and equipment

International Nuclear Information System (INIS)

Linker, F.

1982-06-01

The PEP Survey and Alignment System, which employs both laser-based and optical survey methods, is described. The laser is operated in conjunction with the Tektronix 4051 computer and surveying instruments such as ARM and SAM, system which is designed to automate data input, reduction, and production of alignment instructions. The laser system is used when surveying ring quadrupoles, main bend magnets, sextupoles, and is optional when surveying RF cavities and insertion quadrupoles. Optical methods usually require that data be manually entered into the computer for alignment, but in some cases, an element can be aligned using nominal values of fiducial locations without use of the computer. Optical surveying is used in the alignment of NIT and SIT, low field bend magnets, wigglers, RF cavities, and insertion quadrupoles

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations.

Science.gov (United States)

Bauer, Greta R; Braimoh, Jessica; Scheim, Ayden I; Dharma, Christoffer

2017-01-01

Given that an estimated 0.6% of the U.S. population is transgender (trans) and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79), we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans) participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081), but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group) to assess gender

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations.

Directory of Open Access Journals (Sweden)

Greta R Bauer

Full Text Available Given that an estimated 0.6% of the U.S. population is transgender (trans and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79, we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081, but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group to

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations

Science.gov (United States)

Bauer, Greta R.; Braimoh, Jessica; Scheim, Ayden I.; Dharma, Christoffer

2017-01-01

Given that an estimated 0.6% of the U.S. population is transgender (trans) and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79), we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans) participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081), but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group) to assess gender

On Survey Data Analysis in Corporate Finance

OpenAIRE

Serita, Toshio

2008-01-01

Recently, survey data analysis has emerged as a new method for testing hypotheses andfor clarifying the relative importance of different factors in corporate finance decisions. This paper investigates the advantages and drawbacks of survey data analysis, methodology of survey data analysis such as questionnaire design, and analytical methods for survey data, incomparison with traditional large sample analysis. We show that survey data analysis does not replace traditional large sample analysi...

Measuring the Non-Observed Economy: A Survey-Based Study of Demand in the Korean Prostitution Market

OpenAIRE

KIM, WONSOON

2013-01-01

Illegal activities are by their nature difficult to measure, despite the potentially important role they play in the economy. Their inclusion in Korea’s GDP is necessary to reflect Korea’s national economy more precisely. In this paper, I use a variety of survey methods to provide an estimate of the incidence of prostitution. I estimate the demand for prostitution services in Korea by conducting stratified random sampling surveys of 671 Korean adult males. Because the survey topic was sensiti...

A comparative study on medical image segmentation methods

Directory of Open Access Journals (Sweden)

Praylin Selva Blessy SELVARAJ ASSLEY

2014-03-01

Full Text Available Image segmentation plays an important role in medical images. It has been a relevant research area in computer vision and image analysis. Many segmentation algorithms have been proposed for medical images. This paper makes a review on segmentation methods for medical images. In this survey, segmentation methods are divided into five categories: region based, boundary based, model based, hybrid based and atlas based. The five different categories with their principle ideas, advantages and disadvantages in segmenting different medical images are discussed.