Comparing rapid and culture indicator bacteria methods at inland lake beaches

Science.gov (United States)

Francy, Donna S.; Bushon, Rebecca N.; Brady, Amie M.G.; Kephart, Christopher M.

2013-01-01

A rapid method, quantitative polymerase chain reaction (qPCR), for quantifying indicator bacteria in recreational waters is desirable for public health protection. We report that replacing current Escherichia coli standards with new US Environmental Protection Agency beach action values (BAVs) for enterococci by culture or qPCR may result in more advisories being posted at inland recreational lakes. In this study, concentrations of E. coli and enterococci by culture methods were compared to concentrations of Enterococcus spp. by qPCR at 3 inland lake beaches in Ohio. The E. coli and enterococci culture results were significantly related at all beaches; however, the relations between culture results and Enterococcus spp. qPCR results were not always significant and differed among beaches. All the qPCR results exceeded the new BAV for Enterococcus spp. by qPCR, whereas only 23.7% of culture results for E. coli and 79% of culture results for enterococci exceeded the current standard for E. coli or BAV for enterococci.

[Soil carbohydrates: their determination methods and indication functions].

Science.gov (United States)

Zhang, Wei; Xie, Hongtu; He, Hongbo; Zheng, Lichen; Wang, Ge

2006-08-01

Soil carbohydrates are the important component of soil organic matter, and play an important role in soil aggregation formation. Their hydrolysis methods involve sulfur acid (H2SO4), hydrochloric acid (HCl), and trifluoroacetic acid (TFA) hydrolysis, and their determination methods include colorimetry, gas-liquid chromatography (GLC) , high performance liquid chromatography (HPLC), and high performance anion-exchange chromatography with pulsed amperometric detection (HPAE-PAD). This paper summarized the methods of carbohydrates' hydrolysis, purification and detection, with focus on the derived methods of GLC, and briefly introduced the indication functions of carbohydrates in soil organic matter turnover.

A method for managing the storage of fissile materials using criticality indices

International Nuclear Information System (INIS)

Philbin, J.S.; Harms, G.A.

1995-01-01

This paper describes a method for criticality control at fissile material storage facilities. The method involves the use criticiality indices for storage canisters. The logic, methodology, and results for selected canisters are presented. A concept for an interactive computer program using the method is also introduced. The computer program can be used in real time (using precalulated data) to select a Criticality Index (CI) for a container when it is delivered to or packaged at a site. Criticality safety is assured by controlling the sum of the CIs at each storage location below a defined Emit value when containers are moved

Development and validation of a stability indicating HPTLC-densitometric method for lafutidine

Directory of Open Access Journals (Sweden)

Dinesh Dhamecha

2013-01-01

Full Text Available Background: A simple, selective, precise, and stability indicating high-performance thin layer chromatographic method has been established and validated for analysis of lafutidine in bulk drug and formulations. Materials and Methods: The compounds were analyzed on aluminum backed silica gel 60 F 254 plates with chloroform:ethanol:acetic Acid (8:1:1 as mobile phase. Densitometric analysis of lafutidine was performed at 230 nm. Result : Regression analysis data for the calibration plots were indicative of good linear relationship between response and concentration over the range 100-500 ng per spot. The correlation coefficient (r 2 was 0.998±0.002. Conclusion: Lafutidine was subjected to acid, base, peroxide, and sunlight degradation. In stability tests, the drug was susceptible to acid and basic hydrolysis, oxidation, and photodegradation.

Using and reporting the Delphi method for selecting healthcare quality indicators: a systematic review.

Science.gov (United States)

Boulkedid, Rym; Abdoul, Hendy; Loustau, Marine; Sibony, Olivier; Alberti, Corinne

2011-01-01

Delphi technique is a structured process commonly used to developed healthcare quality indicators, but there is a little recommendation for researchers who wish to use it. This study aimed 1) to describe reporting of the Delphi method to develop quality indicators, 2) to discuss specific methodological skills for quality indicators selection 3) to give guidance about this practice. Three electronic data bases were searched over a 30 years period (1978-2009). All articles that used the Delphi method to select quality indicators were identified. A standardized data extraction form was developed. Four domains (questionnaire preparation, expert panel, progress of the survey and Delphi results) were assessed. Of 80 included studies, quality of reporting varied significantly between items (9% for year's number of experience of the experts to 98% for the type of Delphi used). Reporting of methodological aspects needed to evaluate the reliability of the survey was insufficient: only 39% (31/80) of studies reported response rates for all rounds, 60% (48/80) that feedback was given between rounds, 77% (62/80) the method used to achieve consensus and 57% (48/80) listed quality indicators selected at the end of the survey. A modified Delphi procedure was used in 49/78 (63%) with a physical meeting of the panel members, usually between Delphi rounds. Median number of panel members was 17(Q1:11; Q3:31). In 40/70 (57%) studies, the panel included multiple stakeholders, who were healthcare professionals in 95% (38/40) of cases. Among 75 studies describing criteria to select quality indicators, 28 (37%) used validity and 17(23%) feasibility. The use and reporting of the Delphi method for quality indicators selection need to be improved. We provide some guidance to the investigators to improve the using and reporting of the method in future surveys.

Using and reporting the Delphi method for selecting healthcare quality indicators: a systematic review.

Directory of Open Access Journals (Sweden)

Rym Boulkedid

Full Text Available OBJECTIVE: Delphi technique is a structured process commonly used to developed healthcare quality indicators, but there is a little recommendation for researchers who wish to use it. This study aimed 1 to describe reporting of the Delphi method to develop quality indicators, 2 to discuss specific methodological skills for quality indicators selection 3 to give guidance about this practice. METHODOLOGY AND MAIN FINDING: Three electronic data bases were searched over a 30 years period (1978-2009. All articles that used the Delphi method to select quality indicators were identified. A standardized data extraction form was developed. Four domains (questionnaire preparation, expert panel, progress of the survey and Delphi results were assessed. Of 80 included studies, quality of reporting varied significantly between items (9% for year's number of experience of the experts to 98% for the type of Delphi used. Reporting of methodological aspects needed to evaluate the reliability of the survey was insufficient: only 39% (31/80 of studies reported response rates for all rounds, 60% (48/80 that feedback was given between rounds, 77% (62/80 the method used to achieve consensus and 57% (48/80 listed quality indicators selected at the end of the survey. A modified Delphi procedure was used in 49/78 (63% with a physical meeting of the panel members, usually between Delphi rounds. Median number of panel members was 17(Q1:11; Q3:31. In 40/70 (57% studies, the panel included multiple stakeholders, who were healthcare professionals in 95% (38/40 of cases. Among 75 studies describing criteria to select quality indicators, 28 (37% used validity and 17(23% feasibility. CONCLUSION: The use and reporting of the Delphi method for quality indicators selection need to be improved. We provide some guidance to the investigators to improve the using and reporting of the method in future surveys.

A VALIDATED STABILITY INDICATED RP-HPLC METHOD FOR DUTASTERIDE

OpenAIRE

D. Pavan Kumar a, b *, Naga Jhansi a, G. Srinivasa Rao b, Kirti Kumar Jain a

2018-01-01

ABSTRACT A Simple, Stability indicating, Isocratic, reverse phase High Performance Liquid Chromatographic (RPLC) related substance method was developed for Dutasteride in API. This method separates the impurities which are co-eluting in the pharmacopeia method. Successful separation of degradation impurities and synthetic impurities was achieved by YMC Triat phenyl column. Chromatographic was carried out on YMC Triat phenyl (150 X 4.6 mm, 3.0µm) column using 0.01M Potassium Dihydrogen Pho...

An Integrated MCDM Method in Ranking BSC Perspectives and key Performance Indicators (KPIs

Directory of Open Access Journals (Sweden)

Mohsen Alvandi

2012-04-01

Full Text Available The balanced scorecard (BSC approach is an effective technique for performance evaluation. BSC can better reflect the dependence and feedback problems of each factor in real world situations. This study aims at developing a set of appropriate key performance indicators according to (BSC approach for SAPCO using multiple criteria decision making(MCDM method. We provide key performance indicators through literature reviews and experts' idea in SAPCO, which is one of the biggest vehicle spare suppliers in Iran. The proposed study uses decision making trial and evaluation laboratory (DEMATEL and analytic network process (ANP, respectively to measure the casual relationship between the perspectives as well as the relative weights. The results based on ANP method shows that ‘‘Customer’’ is the most influential factor. In addition, internal process, financial and learning and growth are in two to four positions. Three important key performance indicators are as bellow: Total price of parts, Customer satisfaction and Lack of parts in production.

Real-Time Pore Pressure Detection: Indicators and Improved Methods

Directory of Open Access Journals (Sweden)

Jincai Zhang

2017-01-01

Full Text Available High uncertainties may exist in the predrill pore pressure prediction in new prospects and deepwater subsalt wells; therefore, real-time pore pressure detection is highly needed to reduce drilling risks. The methods for pore pressure detection (the resistivity, sonic, and corrected d-exponent methods are improved using the depth-dependent normal compaction equations to adapt to the requirements of the real-time monitoring. A new method is proposed to calculate pore pressure from the connection gas or elevated background gas, which can be used for real-time pore pressure detection. The pore pressure detection using the logging-while-drilling, measurement-while-drilling, and mud logging data is also implemented and evaluated. Abnormal pore pressure indicators from the well logs, mud logs, and wellbore instability events are identified and analyzed to interpret abnormal pore pressures for guiding real-time drilling decisions. The principles for identifying abnormal pressure indicators are proposed to improve real-time pore pressure monitoring.

Remote methods of indicating oil products in natural waters

Energy Technology Data Exchange (ETDEWEB)

Shlyakhova, L A

1981-01-01

A survey is made of domestic and foreign publications covering remote methods of monitoring film petroleum products and oil in natural waters. The given methods are realized in practice with the use of different sections of the electromagnetic spectrum. Remote quality control of the natural waters at the modern level may be an indicator of water pollution with film petroleum products.

Excimer laser phototherapeutic keratectomy : Indications, results and its role in the Indian scenario

Directory of Open Access Journals (Sweden)

Rao Srinivas

1999-01-01

Full Text Available PURPOSE: To report indications, technique, and results of excimer phototherapeutic keratectomy (PTK, and describe possible reasons for the small numbers of such procedures performed in a referral institute in India. METHODS: Retrospective review of case records of 10 patients (11 eyes who underwent excimer PTK at our institute between February 1994 and September 1997. RESULTS: Corneal scars were the most common indication for treatment. Best-corrected visual acuity (BCVA improved in 6 eyes (mean: 2 lines of Snellen acuity. All eyes had BCVA > or = 6/12 after treatment. None of the patients experienced loss of BCVA after treatment. Unaided visual acuity improved in 3 eyes and decreased in 2 eyes. Change in spherical equivalent refraction > or = 1 diopter occurred in 77.8% of eyes after treatment. Treating central corneal scars resulted in a significant hyperopic shift in refraction. CONCLUSIONS: Excimer PTK is a safe and effective procedure for the treatment of superficial corneal opacities. Post-treatment ametropia may require further correction with optical aids. Inappropriate referrals, deep corneal scars, and cost of the procedure could have contributed to the small numbers of PTK performed at our institute. Improved understanding of procedural strengths and limitations could lead to increased use of this procedure, with satisfying results in selected patients.

Results for WANO indicators for Swedish nuclear power plants 1998-2002

International Nuclear Information System (INIS)

Flodin, Yngve; Loennblad, Christer

2004-01-01

The objective of the SKI indicator project is to introduce safety performance indicators as a complement to the inspections carried out at the swedish nuclear facilities. The Performance Indicators defined by WANO are proven by the industry and should be included in a future indicator system. From the set of WANO-indicators, six have been chosen for evaluation in the project. The chosen indicators are: Collective Radiation Exposure (CRE), Fuel Reliability Index (FRI), Safety System Performance (SP1/2/5), Unplanned Automatic Scrams (UA7), Unit Capability Factor (UCF) and Unplanned Capability Loss Factor (UCL). The resulting indicator values for all the swedish nuclear power plants are presented in graphs for a 5-year period, 1998-2002. Data for the BWR and PWR-collectives are included for comparison. The type of graph used, a combined bar and curve chart, is considered to give the best representation of the data. As a guide when evaluating the results, explanations are provided for individual indicator values that deviate significantly from normal levels

Development of methods of key performance indicators formation for corporate planning

International Nuclear Information System (INIS)

Chebotarev, A.N.

2011-01-01

A theoretical proposition, a model of enterprise performance management and a concept of balanced key performance indicators as a method to control the enterprise strategy have been systematized and presented. An algorithm that increases the efficiency of action plans' formation has been developed and implemented. In particular, a set of criteria for the selection of events and parameters necessary for the formation of an action plan has been created. A method of control of the business processes, allowing the experts to establish the relationship between the business processes performance indicators and the enterprise's key indicators has been developed [ru

Energy indices in irrigated wheat production under conservation and conventional tillage and planting methods

Directory of Open Access Journals (Sweden)

S. M Hosseini

2016-04-01

Full Text Available Introduction: Conservation tillage system was recommended for soil erosion control in North America for the first time 60 years ago (Wang et al., 2006. Using this tillage system including minimum and zero tillage has been rapidly developed in recent years. Thearea covered by zero tillage in 2006 was 95 million ha all over the world (Dumanski et al., 2006. In addition to saving soil and water resources, conservation tillage system reduces energy consumption and improves energy indices by combining different tillage and planting operations. Results of research conducted in Fars province shows that conservation tillage saves fuel consumption for 77% compared to the conventional system (Afzalinia et al., 2009. Conservation tillage also reduces energy consumption from 23.6 to 42.8% in comparison to the conventional tillage (Rusu, 2005. Since energy indices would be affected by reduced input energies in conservation tillage, this research was conducted to evaluate the effect of different tillage and planting methods on energy inputs and energy indices in irrigated wheat production in Eghlid region. Materials and Methods: This research was performed to evaluate and compare the energy indices in irrigated wheat production under different tillage and planting methods. The study was conducted in the form of a randomized complete block experimental design with five treatments and three replications in Eghlid region. The treatments were included, conventional tillage and seed broadcasting (A, conventional tillage and planting with Machine Barzegar grain drill (B, reduced tillage and seeding with Roto-seeder (C, direct seeding with Jairan Sanaat grain drill (D, and direct seeding with Sfoggia direct drill (E. Experimental plots with 10 by 50 m dimensions were used in this study. Loss crop residues were taken out of the experimental plots and standing crop residues were retained in the plots. In the conventional tillage method, primary tillage was performed

Mandibular distraction in neonates: indications, technique, results

Directory of Open Access Journals (Sweden)

Sesenna Enrico

2012-02-01

Full Text Available Abstract Background The Pierre Robin Sequence features were first described by Robin in 1923 and include micrognathia, glossoptosis and respiratory distress with an incidence estimated as 1:8,500 to 1:20,000 newborns. Upper airway obstruction and feeding difficulties are the main concerns related to the pathology. Mandibular distraction should be considered a treatment option (when other treatments result inadequate. Patiants and methods Ten patients between the ages of 1 month and 2 years with severe micrognathia and airway obstruction were treated with Mandibular Distraction Osteogenesis (MDO. All patients underwent fibroscopic examination of the upper airway and a radiographic imaging and/or computed tomography scans to detect malformations and to confirm that the obstruction was caused by posterior tongue displacement. All patients were evaluated by a multidisciplinary team. Indications for surgery included frequent apneic episodes with severe desaturation (70%. Gavage therapy was employed in all patients since oral feeding was not possible. The two tracheotomy patients were 5 months and 2 years old respectively, and the distraction procedure was performed to remove the tracheotomy tube. All patients were treated with bilateral mandibular distraction: two cases with an external multivector distraction device, six cases with an internal non-resorbable device and two cases with an internal resorbable device. In one case, the patient with Goldenhar's Syndrome, the procedure was repeated. Results The resolution of symptoms was obtained in all patients, and, when present, tracheotomy was removed without complications. Of the two patients with pre-existing tracheotomies, in the younger patient (5 months old the tracheotomy was removed 7 days postoperatively. In the Goldenhar's syndrome case (2 years old a Montgomery device was necessary for 6 months due to the presence of tracheotomy-inducted tracheomalacia. Patients were discharged when the

Comparison of the Multiple-sample means with composite sample results for fecal indicator bacteria by quantitative PCR and culture

Science.gov (United States)

ABSTRACT: Few studies have addressed the efficacy of composite sampling for measurement of indicator bacteria by QPCR. In this study, composite results were compared to single sample results for culture- and QPCR-based water quality monitoring. Composite results for both methods ...

Visual Display of Scientific Studies, Methods, and Results

Science.gov (United States)

Saltus, R. W.; Fedi, M.

2015-12-01

The need for efficient and effective communication of scientific ideas becomes more urgent each year.A growing number of societal and economic issues are tied to matters of science - e.g., climate change, natural resource availability, and public health. Societal and political debate should be grounded in a general understanding of scientific work in relevant fields. It is difficult for many participants in these debates to access science directly because the formal method for scientific documentation and dissemination is the journal paper, generally written for a highly technical and specialized audience. Journal papers are very effective and important for documentation of scientific results and are essential to the requirements of science to produce citable and repeatable results. However, journal papers are not effective at providing a quick and intuitive summary useful for public debate. Just as quantitative data are generally best viewed in graphic form, we propose that scientific studies also can benefit from visual summary and display. We explore the use of existing methods for diagramming logical connections and dependencies, such as Venn diagrams, mind maps, flow charts, etc., for rapidly and intuitively communicating the methods and results of scientific studies. We also discuss a method, specifically tailored to summarizing scientific papers that we introduced last year at AGU. Our method diagrams the relative importance and connections between data, methods/models, results/ideas, and implications/importance using a single-page format with connected elements in these four categories. Within each category (e.g., data) the spatial location of individual elements (e.g., seismic, topographic, gravity) indicates relative novelty (e.g., are these new data?) and importance (e.g., how critical are these data to the results of the paper?). The goal is to find ways to rapidly and intuitively share both the results and the process of science, both for communication

An improved method to accurately calibrate the gantry angle indicators of the radiotherapy linear accelerators

International Nuclear Information System (INIS)

Chang Liyun; Ho, S.-Y.; Du, Y.-C.; Lin, C.-M.; Chen Tainsong

2007-01-01

The calibration of the gantry angle indicator is an important and basic quality assurance (QA) item for the radiotherapy linear accelerator. In this study, we propose a new and practical method, which uses only the digital level, V-film, and general solid phantoms. By taking the star shot only, we can accurately calculate the true gantry angle according to the geometry of the film setup. The results on our machine showed that the gantry angle was shifted by -0.11 deg. compared with the digital indicator, and the standard deviation was within 0.05 deg. This method can also be used for the simulator. In conclusion, this proposed method could be adopted as an annual QA item for mechanical QA of the accelerator

Minimally invasive thyroidectomy (MIT): indications and results.

Science.gov (United States)

Docimo, Giovanni; Salvatore Tolone, Salvatore; Gili, Simona; d'Alessandro, A; Casalino, G; Brusciano, L; Ruggiero, Roberto; Docimo, Ludovico

2013-01-01

To establish if the indication for different approaches for thyroidectomy and the incision length provided by means of pre-operative assessment of gland volume and size of nodules resulted in safe and effective outcomes and in any notable aesthetic or quality-of-life impact on patients. Ninehundred eightytwo consecutive patients, undergoing total thyroidectomy, were enrolled. The thyroid volume and maximal nodule diameter were measured by means of ultrasounds. Based on ultrasounds findings, patients were divided into three groups: minimally invasive video assisted thyroidectomy (MIVAT), minimally invasive thyroidectomy (MIT) and conventional thyroidectomy (CT) groups. The data concerning the following parameters were collected: operative time, postoperative complications, postoperative pain and cosmetic results. The MIVAT group included 179 patients, MIT group included 592 patients and CT group included 211 patients. Incidence of complications did not differ significantly in each group. In MIVAT and MIT group, the perception of postoperative pain was less intense than CT group. The patients in the MIVAT (7±1.5) and MIT (8±2) groups were more satisfied with the cosmetic results than those in CT group (5±1.3) (p= MIT is a technique totally reproducible, and easily convertible to perform surgical procedures in respect of the patient, without additional complications, increased costs, and with better aesthetic results.

Kidney spiral CT, indications, realization, results

International Nuclear Information System (INIS)

Braunschweig, R.; Beilicke, M.; Hundt, W.; Breiteneder, T.; Reiser, M.

1999-01-01

The introduction of spiral computed tomography (spiral CT) has vastly enriched the methodologically diversity of computer-tomographic scans. It allows for the recording of different perfusion or excretion stages of the kidney parenchyma of the urine draining paths by carrying out long-distance, phase-identical multiple examinations of the retroperitoneum. The description of the findings which are characterized by their local and contrasts behavior is possible. The following report describes the indications and technological process of kidney spiral CT using kidney-typical intravenous contrast media. Special emphasis is put on the advantages and limits of multiple phase spiral CT. Decisive preconditions are: 1. Specific clinical query, 2. selection of the corresponding phase contrasts of the kidneys and uretra or bladder, 3. exact technical and temporal adjustment of the acquisition parameters. Scanning times are in the range of seconds. The overall examination can be carried out quick and without any major strain on the part of the patient. A sound proof and a general differentiation of focal kideny lesions can be derived from the acquired data. This is also true for kidneys and ureters findings. Bladder findings can be localized and differentiated according to stage. More than two 'spiral acquisitions' should be carried out with restraint taking exposure to radiation into account. Due to the sound registration of focal lesions, its capability of reproduction and its short-time examination, the spiral CT of the kidneys can be said to be the most effective current scanning method of the retroperitoneum following clinical examinations and sonography. (orig.) [de

Effect of Governance Indicators on Under-Five Mortality in OECD Nations: Generalized Method of Moments.

Science.gov (United States)

Emamgholipour, Sara; Asemane, Zahra

2016-01-01

Today, it is recognized that factors other than health services are involved in health improvement and decreased inequality so identifying them is the main concern of policy makers and health authorities. The aim of this study was to investigate the effect of governance indicators on health outcomes. A panel data study was conducted to investigate the effect of governance indicators on child mortality rate in 27 OECD countries from 1996 to 2012 using the Generalized Method of Moments (GMM) model and EVIEWS.8 software. According to the results obtained, under-five mortality rate was significantly related to all of the research variables (p corruption and rule of law indicators decreased child mortality rate by 0.05 and 0.08%, respectively. Furthermore, 1% increase in public health expenditure per capita resulted in a 0.03% decrease in under-five mortality rate. The results of the study suggest that considering control variables, including GDP per capita, public health expenditure per capita, total fertility rate, and improvement of governance indicators (control of corruption and rule of law) would decrease the child mortality rate.

Qualitative Indices of Istamaran Date Variety Affected by Various Drying Methods

Directory of Open Access Journals (Sweden)

E. Mehryar

2015-09-01

Full Text Available Drying of fruits and vegetables is one of the oldest methods for preserving foods. Drying not only affects the moisture content of the product, but also changes other physical, chemical and biological properties of the product including enzymatic activity, microbial spoilage, viscosity, hardness, taste and aroma. In order to study the occurring changes in dried product, qualitative characteristics including shrinkage, color and water rehydration are commonly evaluated. The purpose of this research was to study the effect of drying methods on qualitative indices for dried Istamaran dates. The drying methods were hot air, microwave and vacuum drying. The photos of the final product were taken using a digital camera. Then, color parameters (L*, a* and b* of the samples were measured using Photoshop software. The amount of shrinkage for dried product was determined by liquid displacement method. For evaluating rehydration ability, water absorption capacity (WAC, dry matter holding capacity (DHC, and rehydration ability (RA were also estimated. Results showed that the effect of drying method on WAC, DHC, and RA was significant (p<0.01. Means comparison revealed that the structural damage into the final dried product occurred by microwave method was higher than that for hot air and vacuum drying methods. Drying method did not lead to any significant difference among shrinkage values. Drying temperature influenced shrinkage more than drying time. Analysis of variance showed that the effect of drying method on L*, a* and b* parameters was not significant. Since the temperature of drying in microwave method is very high, it is possible that caramelization occurs during this method. This phenomenon can be considered as the reason of color darkness caused by microwave method.

A Stability Indicating HPLC Method for the Determination of ...

African Journals Online (AJOL)

Erah

stability indicating reverse phase HPLC method for estimating meloxicam (MLX) in bulk ... acetonitrile-water-glacial acetic acid [55:40:5 (% v/v)] at a flow rate of 1ml/min and detection wavelength .... pore and degassed before use. ... determined to assess the effect of small but ... deviation, the standard error of slope, and the.

Methods, measures and indicators for evaluating benefits of transportation research

CSIR Research Space (South Africa)

Du Plessis, Louw

2016-04-01

Full Text Available The purpose of this article is to provide updated information by identifying and discussing methods, measures and indicators for evaluating benefits appropriate for transportation-related research facilities/programmes. The information has been...

Stability-Indicating RP-HPLC Method for Assay of Silver Lactate

Directory of Open Access Journals (Sweden)

V. Srinivasan

2011-01-01

Full Text Available A simple, economic and time-efficient stability-indicating, reverse-phase high-performance liquid chromatographic (RP-HPLC method has been developed for analysis of silver lactate in the presence of degradation products generated by decomposition. When silver lactate was subjected to acid hydrolysis, base hydrolysis, oxidative, photolytic, humidity and thermal stress, degradation was observed during base hydrolysis, oxidation, humidity and thermal stress. The drug was found to be stable to other stress conditions. Successful chromatographic condition of the drug from the degradation products formed under stress conditions was achieved on a phenomenex Gemini column with potassium dihydrogen phosphate buffer, pH adjusted to 2.2 with orthophosphoric acid, as mobile phase. The method was validated for linearity, precision, specificity and robustness and can be used for quality-control during manufacture and assessment of the stability of samples of silver lactate. To the best of our knowledge, a validated stability-indicating LC assay method for silver lactate based on lactic acid is reported for the first time.

Assessment and comparison of two early warning indicator methods in the perspective of prevention of atypical accident scenarios

International Nuclear Information System (INIS)

Paltrinieri, Nicola; Øien, Knut; Cozzani, Valerio

2012-01-01

Some severe major accidents occurred in Europe in recent years (e.g. the Vapour Cloud Explosion at Buncefield in 2005), which were not foreseen by their site “Seveso-II” safety reports. Detailed analyses of such “atypical” scenarios demonstrated that they are the result of a number of failures at different technical and organizational levels. Thus, their prevention is a major challenge and must be coordinated through different kinds of approaches, among which improved early detection plays an important role. Proactive methodologies for the development of early warning indicators can unveil early deviations in the causal chain. Two examples are the Resilience-based Early Warning Indicator (REWI) method and the so-called “Dual Assurance” method. The aim of this study was to analyse the possible integration of early warning indicators in the hazard identification process. A Buncefield-like site was analysed to obtain indicators that were compared with the actual causes that led to the accident at Buncefield (and to similar accident scenarios). The results show that indicators from both methods could have prevented the accidents from happening. However, one main difference is related to the issue of hazard identification, which is fundamental for the prevention of atypical accident scenarios. The REWI method is not dependent on the outcome of the hazard identification process. Instead it provides complementarities to the first prevention approach (improved identification of atypical scenarios), demonstrating that a mutual activity would be an effective strategy in which human, organizational, cultural and technical factors are treated in an integrated manner. - Highlights: ► Early warning indicators were created through 2 methods for the Buncefield oil depot. ► A general capacity to cover causes of atypical events was demonstrated. ► The Dual Assurance method showed to mainly cover operability failures. ► The REWI method showed to promote acts

Multiple predictor smoothing methods for sensitivity analysis: Example results

International Nuclear Information System (INIS)

Storlie, Curtis B.; Helton, Jon C.

2008-01-01

The use of multiple predictor smoothing methods in sampling-based sensitivity analyses of complex models is investigated. Specifically, sensitivity analysis procedures based on smoothing methods employing the stepwise application of the following nonparametric regression techniques are described in the first part of this presentation: (i) locally weighted regression (LOESS), (ii) additive models, (iii) projection pursuit regression, and (iv) recursive partitioning regression. In this, the second and concluding part of the presentation, the indicated procedures are illustrated with both simple test problems and results from a performance assessment for a radioactive waste disposal facility (i.e., the Waste Isolation Pilot Plant). As shown by the example illustrations, the use of smoothing procedures based on nonparametric regression techniques can yield more informative sensitivity analysis results than can be obtained with more traditional sensitivity analysis procedures based on linear regression, rank regression or quadratic regression when nonlinear relationships between model inputs and model predictions are present

Critical Analysis of Methods for Integrating Economic and Environmental Indicators

NARCIS (Netherlands)

Huguet Ferran, Pau; Heijungs, Reinout; Vogtländer, Joost G.

2018-01-01

The application of environmental strategies requires scoring and evaluation methods that provide an integrated vision of the economic and environmental performance of systems. The vector optimisation, ratio and weighted addition of indicators are the three most prevalent techniques for addressing

A METHOD FOR THE SIMULTANEOUS ESTIMATION OF ATMOSPHERIC PARAMETERS USING THE PHOTOMETRIC INDICES IN THE uvby COLOR SYSTEM

International Nuclear Information System (INIS)

Kim, Chulhee; Moon, B.-K.

2011-01-01

A new method was developed to estimate the effective temperature, surface gravity, and metallicity of cool stars using only photometric indices in the uvby color system. In a graphical method, T eff and log g were determined for all of the different values of [Fe/H] using model atmosphere grids with respect to (b - y):c 1 and (b - y):m 1 pair indices. Then, a three-dimensional figure where X-, Y-, and Z-axes correspond to T eff , log g, and [Fe/H] was produced. By reading an intersection of two curves formed by a connection of three parameters obtained from the (b - y):c 1 and (b - y):m 1 pair indices on each of the three projected planes, T eff , log g, and [Fe/H] were determined simultaneously. In addition, an analytical method was devised based on the same algorithm developed for the graphical method. The new method was applied to a number of field dwarfs and giants, and the results were compared with those from a spectroscopic method and other photometric calibrations.

Test of a new method for seismic indices and granulation parameters extraction

Directory of Open Access Journals (Sweden)

Peralta R. A.

2015-01-01

Full Text Available In the framework of the data base project SSI (Stellar Seismic Indicesb, we have developed and tested a new method aiming at optimizing the simultaneous measurement of both the seismic indices characterizing the oscillations (Δν, νmax and the indices characterizing the granulation signature. Here, we describe this method which is intended to take advantage of the MLE (maximum likelihood estimate algorithm combined with the parametrized representation of the red giants pulsation spectrum following the Universal Pattern [6]. We report its performances tested on Monte Carlo simulations.

Method for the determination of a new indicator proportional to the plasma concentration of free thyroxine

International Nuclear Information System (INIS)

Deutsch, G.

1979-11-01

A novel method for the estimation of free thyroxine (T 4 ) in serum is described. Partially heat-denatured serum is mixed with 125 I-labelled T 4 bound to thyroxine-binding globulin (TBG) on a Sephadex column. After a period of equilibration, the column is eluted with buffer and the residual radioactivity on the column measured. This represents the fraction of 125 I-labelled T 4 freed from TBG and can be related to the concentration of free T 4 in the serum, being expressed as ''proportional free thyroxine'' (PFT 4 ) in μg per 100 ml. In studies of the method, a coefficient of variation of 4.52% in the results was found. The mean PFT 4 value in 124 normal subjects was 7.26 +- 1.25 μg per 100 ml. Values below 4.8 μg per 100 ml were considered indicative of hypothyroidism and those above 9.8 μg per 100 ml indicative of hyperthyroidism, in good agreement with clinical findings. The coefficient of correlation between the results and results obtained by the AMES ''Tetralute'' method was 0.911. The mean PFT 4 value in 37 pregnant subjects was 12.2 +- 2.1 μg per 100 ml

Validation of a stability-indicating spectrometric method for the determination of sulfacetamide sodium in pure form and ophthalmic preparations

Directory of Open Access Journals (Sweden)

Sofia Ahmed

2017-01-01

Full Text Available Introduction: Sulfacetamide sodium is a widely used sulfonamide for ophthalmic infections. Objective: A number of analytical methods have been reported for the analysis of sulfacetamide but they lack the ability to determine both the active drug and its major degradation product, sulfanilamide, simultaneously in a sample. Materials and Methods: In the present study a simple, rapid and economical stability-indicating UV spectrometric method has been validated for the simultaneous assay of sulfacetamide sodium and sulfanilamide in pure form and in ophthalmic preparations. Results: The method has been found to be accurate (recovery 100.03 ±0.589% and precise (RSD 0.587% with detectable and quantifiable limits of 1.67×10–6 M (0.04 mg% and 5.07×10–6 M (0.13 mg%, respectively for the assay of pure sulfacetamide sodium. The method is also found to be accurate and precise to small changes in wavelength, pH and buffer concentration as well as to forced degradation. The study further includes the validation of the method for the assay of pure sulfanilamide in solution, which has been found to be accurate, precise and robust. Conclusion: The results indicate that the proposed two-component spectrometric method is stability-indicating and can be used for the simultaneous assay of both sulfacetamide sodium and sulfanilamide in synthetic mixtures and degraded solutions.

Use of digital computers for correction of gamma method and neutron-gamma method indications

International Nuclear Information System (INIS)

Lakhnyuk, V.M.

1978-01-01

The program for the NAIRI-S computer is described which is intended for accounting and elimination of the effect of by-processes when interpreting gamma and neutron-gamma logging indications. By means of slight corrections it is possible to use the program as a mathematical basis for logging diagram standardization by the method of multidimensional regressive analysis and estimation of rock reservoir properties

The Formation of a System of Indicators of Problem Monitoring of the Financial Results of Trade Enterprise

Directory of Open Access Journals (Sweden)

Kruhlova Olena A.

2017-11-01

Full Text Available The article is aimed at defining theoretical foundations and developing scientific-methodical and practical recommendations on substantiation of target values of indicators of financial results for organization of problem monitoring at trade enterprises. It has been determined that the tasks of problem monitoring of financial results depend on the certain stage of the life cycle of enterprise. Its staying at the stages of development, formation or recession requires differentiation of both management goals and target values of financial results. Taking into consideration the coherence of determination of financial results, it has been proved that the main object of problem monitoring is the indicator of net financial result. In order to ensure the break-even activity of a trade enterprise, the target setting for the formation of its net financial result is to achieve zero value; to maintain the rate of growth and profitability of equity capital – a financial result, calculated according to the maximum profitability of equity for the enterprise; to maximize the financial result and ensure the profitability of equity at the level of enterprises-competitors – the financial result, taking into account the maximum profitability of equity based on the data obtained from the benchmarking analysis.

Development and validation of a stability-indicating capillary zone electrophoretic method for the assessment of entecavir and its correlation with liquid chromatographic methods.

Science.gov (United States)

Dalmora, Sergio Luiz; Nogueira, Daniele Rubert; D'Avila, Felipe Bianchini; Souto, Ricardo Bizogne; Leal, Diogo Paim

2011-01-01

A stability-indicating capillary zone electrophoresis (CZE) method was validated for the analysis of entecavir in pharmaceutical formulations, using nimesulide as an internal standard. A fused-silica capillary (50 µm i.d.; effective length, 40 cm) was used while being maintained at 25°C; the applied voltage was 25 kV. A background electrolyte solution consisted of a 20 mM sodium tetraborate solution at pH 10. Injections were performed using a pressure mode at 50 mbar for 5 s, with detection at 216 nm. The specificity and stability-indicating capability were proven through forced degradation studies, evaluating also the in vitro cytotoxicity test of the degraded products. The method was linear over the concentration range of 1-200 µg mL(-1) (r(2) = 0.9999), and was applied for the analysis of entecavir in tablet dosage forms. The results were correlated to those of validated conventional and fast LC methods, showing non-significant differences (p > 0.05).

A novel method for measuring patients' adherence to insulin dosing guidelines: introducing indicators of adherence

Directory of Open Access Journals (Sweden)

Cahané Michel

2008-12-01

Full Text Available Abstract Background Diabetic type 1 patients are often advised to use dose adjustment guidelines to calculate their doses of insulin. Conventional methods of measuring patients' adherence are not applicable to these cases, because insulin doses are not determined in advance. We propose a method and a number of indicators to measure patients' conformance to these insulin dosing guidelines. Methods We used a database of logbooks of type 1 diabetic patients who participated in a summer camp. Patients used a guideline to calculate the doses of insulin lispro and glargine four times a day, and registered their injected doses in the database. We implemented the guideline in a computer system to calculate recommended doses. We then compared injected and recommended doses by using five indicators that we designed for this purpose: absolute agreement (AA: the two doses are the same; relative agreement (RA: there is a slight difference between them; extreme disagreement (ED: the administered and recommended doses are merely opposite; Under-treatment (UT and over-treatment (OT: the injected dose is not enough or too high, respectively. We used weighted linear regression model to study the evolution of these indicators over time. Results We analyzed 1656 insulin doses injected by 28 patients during a three weeks camp. Overall indicator rates were AA = 45%, RA = 30%, ED = 2%, UT = 26% and OT = 30%. The highest rate of absolute agreement is obtained for insulin glargine (AA = 70%. One patient with alarming behavior (AA = 29%, RA = 24% and ED = 8% was detected. The monitoring of these indicators over time revealed a crescendo curve of adherence rate which fitted well in a weighted linear model (slope = 0.85, significance = 0.002. This shows an improvement in the quality of therapeutic decision-making of patients during the camp. Conclusion Our method allowed the measurement of patients' adherence to their insulin adjustment guidelines. The indicators that we

Development and Validation of a Stability-Indicating LC-UV Method ...

African Journals Online (AJOL)

Development and Validation of a Stability-Indicating LC-UV Method for Simultaneous Determination of Ketotifen and Cetirizine in Pharmaceutical Dosage Forms. ... 5 μm) using an isocratic mobile phase that consisted of acetonitrile and 10 mM disodium hydrogen phosphate buffer (pH 6.5) in a ratio of 45:55 % v/v at a flow ...

Interval estimation methods of the mean in small sample situation and the results' comparison

International Nuclear Information System (INIS)

Wu Changli; Guo Chunying; Jiang Meng; Lin Yuangen

2009-01-01

The methods of the sample mean's interval estimation, namely the classical method, the Bootstrap method, the Bayesian Bootstrap method, the Jackknife method and the spread method of the Empirical Characteristic distribution function are described. Numerical calculation on the samples' mean intervals is carried out where the numbers of the samples are 4, 5, 6 respectively. The results indicate the Bootstrap method and the Bayesian Bootstrap method are much more appropriate than others in small sample situation. (authors)

THE RESULTS OF THE ANALYSIS OF THE STUDENTS’ BODY COMPOSITION BY BIOIMPEDANCE METHOD

Directory of Open Access Journals (Sweden)

Dmitry S. Blinov

2016-06-01

Full Text Available Introduction. Tissues of the human body can conduct electricity. Liquid medium (water, blood, the contents of hollow bodies, have a low impedance, i.e. good conductors, while denser tissue (muscle, nerves, etc. resistance is significantly higher. The biggest impedance have fat and bone tissues. The bioimpendancemetry – a method which allows to determine the composition of the human body by measuring electrical resistance (impedance of its tissues. Relevance. This technique is indispensable to dieticians and fitness trainers. In addition, the results of the study can provide invaluable assistance in the appointment of effective treatment physicians, gynecologists, orthopedists, and other specialists. The bioimpedance method helps to determine the risks of developing diabetes type 2, atherosclerosis, hypertension, diseases of the musculoskeletal system, disorders of the endocrine system, gall-stone disease and etc. Materials and Methods. In the list of parameters of body composition assessed by bioimpedance analysis method, included absolute and relative indicators. Depending on the method of measurement of the absolute rates were determined for the whole body. To absolute performance were: fat and skinny body mass index, active cell and skeletal muscle mass, total body water, cellular and extracellular fluid. Along with them were calculated relatively (normalized to body weight, lean mass, or other variables indicators of body composition. Results. In the result of the comparison of anthropometric and bioimpedance method found that growth performance, vital capacity, weight, waist circumference, circumfer¬ence of waist and hip, basal metabolism, body fat mass, normalized on growth, lean mass, percentage skeletal muscle mass in boys and girls with normal and excessive body weight had statistically significant differences. Discussion and Conclusions. In the present study physical development with consideration of body composition in students

[Using sequential indicator simulation method to define risk areas of soil heavy metals in farmland.

Science.gov (United States)

Yang, Hao; Song, Ying Qiang; Hu, Yue Ming; Chen, Fei Xiang; Zhang, Rui

2018-05-01

The heavy metals in soil have serious impacts on safety, ecological environment and human health due to their toxicity and accumulation. It is necessary to efficiently identify the risk area of heavy metals in farmland soil, which is of important significance for environment protection, pollution warning and farmland risk control. We collected 204 samples and analyzed the contents of seven kinds of heavy metals (Cu, Zn, Pb, Cd, Cr, As, Hg) in Zengcheng District of Guangzhou, China. In order to overcame the problems of the data, including the limitation of abnormal values and skewness distribution and the smooth effect with the traditional kriging methods, we used sequential indicator simulation method (SISIM) to define the spatial distribution of heavy metals, and combined Hakanson index method to identify potential ecological risk area of heavy metals in farmland. The results showed that: (1) Based on the similar accuracy of spatial prediction of soil heavy metals, the SISIM had a better expression of detail rebuild than ordinary kriging in small scale area. Compared to indicator kriging, the SISIM had less error rate (4.9%-17.1%) in uncertainty evaluation of heavy-metal risk identification. The SISIM had less smooth effect and was more applicable to simulate the spatial uncertainty assessment of soil heavy metals and risk identification. (2) There was no pollution in Zengcheng's farmland. Moderate potential ecological risk was found in the southern part of study area due to enterprise production, human activities, and river sediments. This study combined the sequential indicator simulation with Hakanson risk index method, and effectively overcame the outlier information loss and smooth effect of traditional kriging method. It provided a new way to identify the soil heavy metal risk area of farmland in uneven sampling.

[Confirming Indicators of Qualitative Results by Chromatography-mass Spectrometry in Biological Samples].

Science.gov (United States)

Liu, S D; Zhang, D M; Zhang, W; Zhang, W F

2017-04-01

Because of the exist of complex matrix, the confirming indicators of qualitative results for toxic substances in biological samples by chromatography-mass spectrometry are different from that in non-biological samples. Even in biological samples, the confirming indicators are different in various application areas. This paper reviews the similarities and differences of confirming indicators for the analyte in biological samples by chromatography-mass spectrometry in the field of forensic toxicological analysis and other application areas. These confirming indicators include retention time （RT）, relative retention time （RRT）, signal to noise （S/N）, characteristic ions, relative abundance of characteristic ions, parent ion-daughter ion pair and abundance ratio of ion pair, etc. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Formulation of the relationship between indices of neutron-gamma and gamma-gamma method and the percentrage of iron

International Nuclear Information System (INIS)

Majorowicz, J.

1973-01-01

In this article, the author presents the possibility of a complex utilization of radiometric logging methods, neutron-gamma profiling and gamma-gamma density logging for determining percentage of iron and establishing geophysical possibilities of identifying zones of economically profitable ores in borehole profiles. Figures present the correlations between indices of neutron-gamma and gamma-gamma logging methods and the percentage of iron, as well as the correlation of neutron-gamma and gamma-gamma indices for zones minerallized with iron ores. The article presents the correlational analyses of the results: the correlational coefficients are given as well as total error in determining iron content on the basis of each of the methods described. Next, a multidimensional statistical analysis is carried out on the results obtained. On the basis of the two-dimensional correlational coefficients calculated and the average standard deviation, an equation of linear regression was formulated, simultaneously involving three parameters - the indices of neutron-gamma and gamma-gamma logging and the percentage of iron. The multiple correlational coefficient obtained markedly exceeds the two-dimentional correlation coefficient (r=0.974>rsub(xz)>rsub(yz)>rsub(xy)). The given method of utilizing multidimensional statistics in borehole geophysics for identifying iron ores is an efficient one. On the basis of several relationships among independent variables which are less obvious (smaller values of correlational coefficient), it is possible to obtain a single distinct relationship involving all variables simultaneously. (author)

Transluminal coronary angioplasty (TCA) techniques, indications and results

International Nuclear Information System (INIS)

Kober, G.; Lang, H.; Vallbracht, C.; Bussmann, W.D.; Hopf, R.; Kunkel, B.; Kaltenbach, M.

1985-01-01

Transluminal coronary angioplasty (TCA) was introduced in 1977 for dilatation of coronary stenoses. From October 1977 to December 1984 1087 procedures have been performed in Frankfurt. The mean success rate was 77% with an increase from 58% to 84% since 1977. Recurrences were seen within the first year in 15% of the patients, which could be treated successfully in a high percentage with a second TCA. Emergency bypass operations were necessary in 5.2%. Four patients (fatality rate 0.37%) died as the consequence of the intervention. Within few years TCA has become an established procedure for myocardial revascularisation, with a high success rate. Major progress has been possible in the last few years due to technical developments, which are still going on. They may lead to further improvement of the results and enlargement of the indication for TCA. (orig.) [de

Quantifying viruses and bacteria in wastewater—Results, interpretation methods, and quality control

Science.gov (United States)

Francy, Donna S.; Stelzer, Erin A.; Bushon, Rebecca N.; Brady, Amie M.G.; Mailot, Brian E.; Spencer, Susan K.; Borchardt, Mark A.; Elber, Ashley G.; Riddell, Kimberly R.; Gellner, Terry M.

2011-01-01

Membrane bioreactors (MBR), used for wastewater treatment in Ohio and elsewhere in the United States, have pore sizes small enough to theoretically reduce concentrations of protozoa and bacteria, but not viruses. Sampling for viruses in wastewater is seldom done and not required. Instead, the bacterial indicators Escherichia coli (E. coli) and fecal coliforms are the required microbial measures of effluents for wastewater-discharge permits. Information is needed on the effectiveness of MBRs in removing human enteric viruses from wastewaters, particularly as compared to conventional wastewater treatment before and after disinfection. A total of 73 regular and 28 quality-control (QC) samples were collected at three MBR and two conventional wastewater plants in Ohio during 23 regular and 3 QC sampling trips in 2008-10. Samples were collected at various stages in the treatment processes and analyzed for bacterial indicators E. coli, fecal coliforms, and enterococci by membrane filtration; somatic and F-specific coliphage by the single agar layer (SAL) method; adenovirus, enterovirus, norovirus GI and GII, rotavirus, and hepatitis A virus by molecular methods; and viruses by cell culture. While addressing the main objective of the study-comparing removal of viruses and bacterial indicators in MBR and conventional plants-it was realized that work was needed to identify data analysis and quantification methods for interpreting enteric virus and QC data. Therefore, methods for quantifying viruses, qualifying results, and applying QC data to interpretations are described in this report. During each regular sampling trip, samples were collected (1) before conventional or MBR treatment (post-preliminary), (2) after secondary or MBR treatment (post-secondary or post-MBR), (3) after tertiary treatment (one conventional plant only), and (4) after disinfection (post-disinfection). Glass-wool fiber filtration was used to concentrate enteric viruses from large volumes, and small

Stability-indicating RP-HPLC method for the simultaneous determination of escitalopram oxalate and clonazepam.

Science.gov (United States)

Kakde, Rajendra B; Satone, Dinesh D; Gadapayale, Kamalesh K; Kakde, Megha G

2013-07-01

The objective of the current study was to develop a validated, specific stability-indicating reversed-phase liquid chromatographic (LC) method for the quantitative determination of escitalopram oxalate and clonazepam and their related substances in bulk drugs and pharmaceutical dosage forms in the presence of degradation products. Forced degradation studies were performed on the pure drugs of escitalopram oxalate and clonazepam, as per the stress conditions prescribed by the International Conference on Harmonization (ICH) using acid, base, oxidation, thermal stress and photolytic degradation to show the stability-indicating power of the method. Significant degradation was observed during acid and alkaline hydrolysis and no degradation was observed in other stress conditions. The chromatographic method was optimized using the samples generated from forced degradation studies. Good resolution between the peaks corresponded to the active pharmaceutical ingredients, escitalopram oxalate and clonazepam, and degradation products from the analyte were achieved on an ODS Hypersil C18 column (250 × 4.6 mm) using a mobile phase consisting of a mixture of acetonitrile-50 mM phosphate buffer + 10 mM triethylamine (70:30, v/v). The detection was conducted at 268 nm. The limit of detection and the limit of quantitation for escitalopram oxalate and clonazepam were established. The stress test solutions were assayed against the qualified working standards of escitalopram oxalate and clonazepam, which indicated that the developed LC method was stability-indicating. Validation of the developed LC method was conducted as per ICH requirements. The developed LC method was found to be suitable to check the quality of bulk samples of escitalopram oxalate and clonazepam.

Inter-comparison of statistical downscaling methods for projection of extreme flow indices across Europe

DEFF Research Database (Denmark)

Hundecha, Yeshewatesfa; Sunyer Pinya, Maria Antonia; Lawrence, Deborah

2016-01-01

The effect of methods of statistical downscaling of daily precipitation on changes in extreme flow indices under a plausible future climate change scenario was investigated in 11 catchments selected from 9 countries in different parts of Europe. The catchments vary from 67 to 6171km2 in size...... catchments to simulate daily runoff. A set of flood indices were derived from daily flows and their changes have been evaluated by comparing their values derived from simulations corresponding to the current and future climate. Most of the implemented downscaling methods project an increase in the extreme...... flow indices in most of the catchments. The catchments where the extremes are expected to increase have a rainfall-dominated flood regime. In these catchments, the downscaling methods also project an increase in the extreme precipitation in the seasons when the extreme flows occur. In catchments where...

Core damage risk indicators

International Nuclear Information System (INIS)

Szikszai, T.

1994-01-01

The purpose of this document is to show a method for the fast recalculation of the PSA. To avoid the information loose, it is necessary to simplify the PSA models, or at least reorganize them. The method, introduced in this document, require that preparation, so we try to show, how to do that. This document is an introduction. This is the starting point of the work related to the development of the risk indicators. In the future, with the application of this method, we are going to show an everyday use of the PSA results to produce the indicators of the core damage risk. There are two different indicators of the plant safety performance, related to the core damage risk. The first is the core damage frequency indicator (CDFI), and the second is the core damage probability indicator (CDPI). Of course, we cannot describe all of the possible ways to use these indicators, rather we will try to introduce the requirements to establish such an indicator system and the calculation process

Evaluating co-creation of knowledge: from quality criteria and indicators to methods

Science.gov (United States)

Schuck-Zöller, Susanne; Cortekar, Jörg; Jacob, Daniela

2017-11-01

Basic research in the natural sciences rests on a long tradition of evaluation. However, since the San Francisco Declaration on Research Assessment (DORA) came out in 2012, there has been intense discussion in the natural sciences, above all amongst researchers and funding agencies in the different fields of applied research and scientific service. This discussion was intensified when climate services and other fields, used to make users participate in research and development activities (co-creation), demanded new evaluation methods appropriate to this new research mode. This paper starts by describing a comprehensive and interdisciplinary literature overview of indicators to evaluate co-creation of knowledge, including the different fields of integrated knowledge production. Then the authors harmonize the different elements of evaluation from literature in an evaluation cascade that scales down from very general evaluation dimensions to tangible assessment methods. They describe evaluation indicators already being documented and include a mixture of different assessment methods for two exemplary criteria. It is shown what can be deduced from already existing methodology for climate services and envisaged how climate services can further to develop their specific evaluation method.

Comparing two survey methods of measuring health-related indicators: Lot Quality Assurance Sampling and Demographic Health Surveys.

Science.gov (United States)

Anoke, Sarah C; Mwai, Paul; Jeffery, Caroline; Valadez, Joseph J; Pagano, Marcello

2015-12-01

Two common methods used to measure indicators for health programme monitoring and evaluation are the demographic and health surveys (DHS) and lot quality assurance sampling (LQAS); each one has different strengths. We report on both methods when utilised in comparable situations. We compared 24 indicators in south-west Uganda, where data for prevalence estimations were collected independently for the two methods in 2011 (LQAS: n = 8876; DHS: n = 1200). Data were stratified (e.g. gender and age) resulting in 37 comparisons. We used a two-sample two-sided Z-test of proportions to compare both methods. The average difference between LQAS and DHS for 37 estimates was 0.062 (SD = 0.093; median = 0.039). The average difference among the 21 failures to reject equality of proportions was 0.010 (SD = 0.041; median = 0.009); among the 16 rejections, it was 0.130 (SD = 0.010, median = 0.118). Seven of the 16 rejections exhibited absolute differences of 0.10 and 0.20 (mean = 0.261, SD = 0.083). There is 75.7% agreement across the two surveys. Both methods yield regional results, but only LQAS provides information at less granular levels (e.g. the district level) where managerial action is taken. The cost advantage and localisation make LQAS feasible to conduct more frequently, and provides the possibility for real-time health outcomes monitoring. © 2015 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

Using GIS-based methods of multicriteria analysis to construct socio-economic deprivation indices

Directory of Open Access Journals (Sweden)

Hayes Michael V

2007-05-01

Full Text Available Abstract Background Over the past several decades researchers have produced substantial evidence of a social gradient in a variety of health outcomes, rising from systematic differences in income, education, employment conditions, and family dynamics within the population. Social gradients in health are measured using deprivation indices, which are typically constructed from aggregated socio-economic data taken from the national census – a technique which dates back at least until the early 1970's. The primary method of index construction over the last decade has been a Principal Component Analysis. Seldom are the indices constructed from survey-based data sources due to the inherent difficulty in validating the subjectivity of the response scores. We argue that this very subjectivity can uncover spatial distributions of local health outcomes. Moreover, indication of neighbourhood socio-economic status may go underrepresented when weighted without expert opinion. In this paper we propose the use of geographic information science (GIS for constructing the index. We employ a GIS-based Order Weighted Average (OWA Multicriteria Analysis (MCA as a technique to validate deprivation indices that are constructed using more qualitative data sources. Both OWA and traditional MCA are well known and used methodologies in spatial analysis but have had little application in social epidemiology. Results A survey of British Columbia's Medical Health Officers (MHOs was used to populate the MCA-based index. Seven variables were selected and weighted based on the survey results. OWA variable weights assign both local and global weights to the index variables using a sliding scale, producing a range of variable scenarios. The local weights also provide leverage for controlling the level of uncertainty in the MHO response scores. This is distinct from traditional deprivation indices in that the weighting is simultaneously dictated by the original respondent scores

Pelvic floor physiotherapy for women with urogenital dysfunction: indications and methods.

Science.gov (United States)

Rosenbaum, T Y

2011-03-01

Pelvic floor physiotherapy (PFPT) is considered to be a salient component of the conservative management of women with urogenital dysfunction including urinary incontinence and pelvic organ prolapse (POP). PFPT is an important adjunct to the management of female pelvic and sexual pain disorders which are often associated with bothersome bladder symptoms. Physiotherapists utilize a variety of treatment methods which include behavioral therapy, exercise instruction, manual therapy, biofeedback and electrical stimulation. This review article provides a literature-based update describing and highlighting current indications and methods for pelvic floor physiotherapy intervention.

Indicator methods to evaluate the hygienic performance of industrial scale operating Biowaste Composting Plants.

Science.gov (United States)

Martens, Jürgen

2005-01-01

The hygienic performance of biowaste composting plants to ensure the quality of compost is of high importance. Existing compost quality assurance systems reflect this importance through intensive testing of hygienic parameters. In many countries, compost quality assurance systems are under construction and it is necessary to check and to optimize the methods to state the hygienic performance of composting plants. A set of indicator methods to evaluate the hygienic performance of normal operating biowaste composting plants was developed. The indicator methods were developed by investigating temperature measurements from indirect process tests from 23 composting plants belonging to 11 design types of the Hygiene Design Type Testing System of the German Compost Quality Association (BGK e.V.). The presented indicator methods are the grade of hygienization, the basic curve shape, and the hygienic risk area. The temperature courses of single plants are not distributed normally, but they were grouped by cluster analysis in normal distributed subgroups. That was a precondition to develop the mentioned indicator methods. For each plant the grade of hygienization was calculated through transformation into the standard normal distribution. It shows the part in percent of the entire data set which meet the legal temperature requirements. The hygienization grade differs widely within the design types and falls below 50% for about one fourth of the plants. The subgroups are divided visually into basic curve shapes which stand for different process courses. For each plant the composition of the entire data set out of the various basic curve shapes can be used as an indicator for the basic process conditions. Some basic curve shapes indicate abnormal process courses which can be emended through process optimization. A hygienic risk area concept using the 90% range of variation of the normal temperature courses was introduced. Comparing the design type range of variation with the

Extracellular Signatures as Indicators of Processing Methods

Energy Technology Data Exchange (ETDEWEB)

Wahl, Karen L.

2012-01-09

As described in other chapters within this volume, many aspects of microbial cells vary with culture conditions and therefore can potentially be analyzed as forensic signatures of growth conditions. In addition to changes or variations in components of the microbes themselves, extracellular materials indicative of production processes may remain associated with the final bacterial product. It is well recognized that even with considerable effort to make pure products such as fine chemicals or pharmaceuticals, trace impurities from components or synthesis steps associated with production processes can be detected in the final product. These impurities can be used as indicators of production source or methods, such as to help connect drugs of abuse to supply chains. Extracellular residue associated with microbial cells could similarly help to characterize production processes. For successful growth of microorganisms on culture media there must be an available source of carbon, nitrogen, inorganic phosphate and sulfur, trace metals, water and vitamins. The pH, temperature, and a supply of oxygen or other gases must also be appropriate for a given organism for successful culture. The sources of these components and the range in temperature, pH and other variables has adapted over the years with currently a wide range of possible combinations of media components, recipes and parameters to choose from for a given organism. Because of this wide variability in components, mixtures of components, and other parameters, there is the potential for differentiation of cultured organisms based on changes in culture conditions. The challenge remains how to narrow the field of potential combinations and be able to attribute variations in the final bacterial product and extracellular signatures associated with the final product to information about the culture conditions or recipe used in the production of that product.

Comparison of manual mycobacteria growth indicator tube and epsilometer test with agar proportion method for susceptibility testing of Mycobacterium tuberculosis

Directory of Open Access Journals (Sweden)

N Karabulut

2014-01-01

Full Text Available Background and Objectives: Antimycobacterial susceptibility tests take weeks, and delayed therapy can lead to spread of Mycobacterium tuberculosis. Therefore, rapid, accurate and cost-effective methods are required for proper therapy selection. In this study, the Mycobacteria growth indicator tube (MGIT and epsilometer test (Etest methods were compared to the agar proportion method for susceptibility testing of Mycobacterium tuberculosis. Materials and Methods: The susceptibility tests against isoniazid (INH, rifampin (RIF, streptomycin (STM and ethambutol (ETM of 51 M. tuberculosis complex isolates were analyzed by the MGIT, Etest and agar proportion methods. Results: The concordance between MGIT/Etest and agar proportion methods was 98% for INH and 100% for RIF, STM, ETM. There were not statistically significant differences in results of the susceptibility tests between MGIT/Etest and the reference agar proportion method. Conclusion: The results have shown that MGIT and Etest methods can be used instead of the agar proportion method, because these two methods are more rapid and easier than the agar proportion method.

Instrumental Landing Using Audio Indication

Science.gov (United States)

Burlak, E. A.; Nabatchikov, A. M.; Korsun, O. N.

2018-02-01

The paper proposes an audio indication method for presenting to a pilot the information regarding the relative positions of an aircraft in the tasks of precision piloting. The implementation of the method is presented, the use of such parameters of audio signal as loudness, frequency and modulation are discussed. To confirm the operability of the audio indication channel the experiments using modern aircraft simulation facility were carried out. The simulated performed the instrument landing using the proposed audio method to indicate the aircraft deviations in relation to the slide path. The results proved compatible with the simulated instrumental landings using the traditional glidescope pointers. It inspires to develop the method in order to solve other precision piloting tasks.

Using the Delphi method to develop nursing-sensitive quality indicators for the NICU.

Science.gov (United States)

Chen, Lin; Huang, Li-Hua; Xing, Mei-Yuan; Feng, Zhi-Xian; Shao, Le-Wen; Zhang, Mei-Yun; Shao, Rong-Ya

2017-02-01

To develop nursing-sensitive quality indicators consistent with current medical practices in Chinese neonatal intensive care units. The development of nursing-sensitive quality indicators has become a top priority in nursing management. To the best of our knowledge, there has been no objective, scientific and sensitive evaluation of the quality of neonatal intensive care unit nursing in China. A modified Delphi technique was used to seek opinions from experts about what should be used and prioritised as indicators of quality care in neonatal intensive care unit nursing. Based on a literature review, we identified 21 indicators of nursing-sensitive quality in the neonatal intensive care unit. Our group of 11 consultants chose 13 indicators to be discussed using the Delphi method. In October and November 2014, 39 neonatal intensive care unit experts in 18 tertiary hospitals spread across six provinces participated in two rounds of Delphi panels. Of the 13 indicators discussed, 11 were identified as indicators of nursing-sensitive quality in the neonatal intensive care unit: rate of nosocomial infections, rate of accidental endotracheal extubation, rate of errors in medication administration, rate of treatment for pain, rate of peripheral venous extravasation, rate of compliance with handwashing techniques, incidence of pressure ulcers, incidence of noise, the bed-to-care ratio, the proportion of nurses with greater than five years neonatal intensive care unit experience and incidence of retinopathy. The 11 neonatal intensive care unit nursing-sensitive indicators identified by the Delphi method integrated with basic Chinese practices provide a basis for nursing management and the monitoring of nursing quality. This study identified nursing-sensitive quality indicators for neonatal intensive care unit care that are suitable for current clinical practice in China. © 2016 John Wiley & Sons Ltd.

Review of methods and indicators in sustainable urban transport studies overview from 2000 to 2016

Directory of Open Access Journals (Sweden)

Puji Adiatna Nadi

2017-12-01

Full Text Available The attention of countries either the developed or developing countries on sustainable urban transport is becoming more popular. The purpose of paper is to review the methods and the indicators used for measuring performance of sustainable urban transport. This study is based on the literature review and the case study observation and also uses the quantitative assessment. It reviews the theoretical aspects of sustainability factors at various research works and performance indicator in urban transportation. The indicators were classified into two major categories: (i assessment methods in sustainable urban transport (SUT, and (ii basic of sustainability indicators for urban transport. This study found several types of analytical techniques for measuring sustainability indicators in urban transport. It also identify five indicators as basic element to measure sustainable urban transport performance i.e. traffic congestion, traffic air pollution, traffic noise pollution, traffic accidents and land consumption for transport infrastructure.

Application of Biosphere Compatibility Indicator for Assessment of the Effectiveness of Environmental Protection Methods

Science.gov (United States)

Bakaeva, N. V.; Vorobyov, S. A.; Chernyaeva, I. V.

2017-11-01

The article is devoted to the issue of using the biosphere compatibility indicator to assess the effectiveness of environmental protection methods. The indicator biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator allows one to assess not only qualitatively but also quantitatively the degree of urban areas development from the standpoint of preserving the biosphere in urban ecosystems while performing the city’s main functions. The integral biosphere compatibility indicator allows us to assess not only the current ecological situation in the territory under consideration but also to plan the forecast of its changes for the new construction projects implementation or for the reconstruction of the existing ones. The biosphere compatibility indicator, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), allows us to quantify the effectiveness degree of different methods for environment protection to choose the most effective one under these conditions.

New method for distance-based close following safety indicator.

Science.gov (United States)

Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

2015-01-01

The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

Development and validation of stability indicating UPLC assay method for ziprasidone active pharma ingredient

Directory of Open Access Journals (Sweden)

Sonam Mittal

2012-01-01

Full Text Available Background: Ziprasidone, a novel antipsychotic, exhibits a potent highly selective antagonistic activity on D2 and 5HT2A receptors. Literature survey for ziprasidone revealed several analytical methods based on different techniques but no UPLC method has been reported so far. Aim: Aim of this research paper is to present a simple and rapid stability indicating isocratic, ultra performance liquid chromatographic (UPLC method which was developed and validated for the determination of ziprasidone active pharmaceutical ingredient. Forced degradation studies of ziprasidone were studied under acid, base, oxidative hydrolysis, thermal stress and photo stress conditions. Materials and Methods: The quantitative determination of ziprasidone drug was performed on a Supelco analytical column (100×2.1 mm i.d., 2.7 ΅m with 10 mM ammonium acetate buffer (pH: 6.7 and acetonitrile (ACN as mobile phase with the ratio (55:45-Buffer:ACN at a flow rate of 0.35 ml/ min. For UPLC method, UV detection was made at 318 nm and the run time was 3 min. Developed UPLC method was validated as per ICH guidelines. Results and Conclusion: Mild degradation of the drug substance was observed during oxidative hydrolysis and considerable degradation observed during basic hydrolysis. During method validation, parameters such as precision, linearity, ruggedness, stability, robustness, and specificity were evaluated, which remained within acceptable limits. Developed UPLC method was successfully applied for evaluating assay of Ziprasidone active Pharma ingredient.

A comparison of short-term dispersion estimates resulting from various atmospheric stability classification methods

International Nuclear Information System (INIS)

Mitchell, A.E. Jr.

1982-01-01

Four methods of classifying atmospheric stability class are applied at four sites to make short-term (1-h) dispersion estimates from a ground-level source based on a model consistent with U.S. Nuclear Regulatory Commission practice. The classification methods include vertical temperature gradient, standard deviation of horizontal wind direction fluctuations (sigma theta), Pasquill-Turner, and modified sigma theta which accounts for meander. Results indicate that modified sigma theta yields reasonable dispersion estimates compared to those produced using methods of vertical temperature gradient and Pasquill-Turner, and can be considered as a potential economic alternative in establishing onsite monitoring programs. (author)

Indicator electrodes from d-elements for application in different types of potentiometric analytical methods

Directory of Open Access Journals (Sweden)

Z. Kunasheva

2012-05-01

Full Text Available The article covers the use of metal electrodes from titanium, tungsten, molybdenum as indicator electrodes at potentiometric method of analysis. The condition of measuring operation in dependence on pH, ionic strength of solutions is described in the article. Electrode potential of testing electrodes are measured in the interval of concentration of salts from 0,1∙10-1 mole/l till 0,1∙10-6 mole/l. The results of testing of electrical-analytical description of metal electrodes made of d-elements, in particular, titanium, tungsten, molybdenum in solutions of cations of some metals and anions were mentioned. As ions of metal cations Cu2+, Cd2+, Zn2+, Pb2+ and anions Cl-, I-, F- were chosen.It is identified that titanic electrode has different response to ions of copper (II, zinc and cadmium. However, dependence of electrode potential on concentration of ions of metal is rectilinear, that is vequired of indicator electrodes in the direct potential metrics.  

Expanding Resilience Indicators: A Case Study on Buffering Capacity Indicator in a Process Plant

Directory of Open Access Journals (Sweden)

Shirali

2016-03-01

Full Text Available Background The complexity of modern sociotechnical systems has created new challenges for safety, so that traditional approaches are not able to cope with them. Resilience engineering (RE is a good alternative to traditional approaches for safety management, however resilience is still a difficult concept to measure, and indicators such as buffering capacity, flexibility, and so on, which are thought to contribute to it, are undeveloped. Objectives This study aimed at expanding buffering capacity as one of the main indicators in order to facilitate measurement of resilience of a system. Materials and Methods We used the Delphi method in order to identify indicators, and data related to all the indicators were gathered by observation and interview. In this line, 32 of the experienced operators with at least 15 years of operational record were selected for semi-structured interviews. Gathered data was processed by the principal component analysis technique. The results were processed by the Minitab 15 software. Results In this study, 29 factors affecting this indicator were determined using the Delphi method; the scores of all factors were less than the scores of the best practice. On the other hand, the state of this indicator was poor in plant included in the study. Conclusions This was the first study that focused on expanding resilience indicators, and presents a new framework to simplify assessment of resilience and safety of a complex system.

Application of Statistical Method of Path Analysis to Describe Soil Biological Indices

Directory of Open Access Journals (Sweden)

Y. Kooch

2016-09-01

Full Text Available Introduction: Among the collection of natural resources in the world, soil is considered as one of the most important components of the environment. Protect and improve the properties of this precious resource, requires a comprehensive and coordinated action that only through a deep understanding of quantitative (not only recognition of the quality the origin, distribution and functionality in a natural ecosystem is possible. Many researchers believe that due to the quick reactions of soil organisms to environmental changes, soil biological survey to estimate soil quality is more important than the chemical and physical properties. For this reason, in many studies the nitrogen mineralization and microbial respiration indices are regarded. The aim of the present study were to study the direct and indirect effects of soil physicochemical characteristics on the most important biological indicators (nitrogen mineralization and microbial respiration, which has not been carefully considered up to now. This research is the first study to provide evidence to the future planning and management of soil sciences. Materials and Methods: For this, a limitation of 20 ha area of Experimental Forest Station of Tarbiat Modares University was considered. Fifty five soil samples, from the top 15 cm of soil, were taken, from which bulk density, texture, organic C, total N, cation exchange capacity (CEC, nitrogen mineralization and microbial respiration were determined at the laboratory. The data stored in Excel as a database. To determine the relationship between biological indices and soil physicochemical characteristics, correlation analysis and factor analysis using principal component analysis (PCA were employed. To investigate all direct and indirect relationships between biological indices and different soil characteristics, path analysis (path analysis was used. Results and Discussion: Results showed significant positive relations between biological indices

Stability-indicating UPLC method for determining related substances and degradants in dronedarone.

Science.gov (United States)

Pydimarry, Surya Prakash Rao; Cholleti, Vijay Kumar; Vangala, Ranga Reddy

2014-08-01

A simple, sensitive and reproducible method was developed on ultra-performance liquid chromatography coupled with photodiode array detection for the quantitative determination of dronedarone hydrochloride (DRO) in drug substance and pharmaceutical dosage forms. The method is applicable for the quantification of related substances and assays of drug substances. Chromatographic separation was achieved on Acquity UPLC BEH C8 100 mm, 2.1 mm and 1.7 µm columns, using gradient elution within a short run time of 10.0 min. The eluted compounds were monitored at 288 nm, the flow rate was 0.5 mL/min and the column oven temperature was maintained at 40°C. The resolution of DRO and 11 impurities (potentials and by-products) was greater than 2.0 for all pairs of components. The high correlation coefficient value (>0.9995) indicates the clear correlations between the concentrations of investigated compound and their peak areas within the test ranges. The repeatability and intermediate precision, expressed by the relative standard deviation, were less than 2.5%. The accuracy and validity of the method were further ascertained by performing recovery studies via a spike method. The accuracy of the method, expressed as relative error, was satisfactory. No interference was observed from concomitant substances normally added to the tablets. DRO was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. DRO was found to degrade significantly in acid and base stress conditions and to remain stable in thermal, photolytic degradation, oxidative and hydrolytic conditions. The degradation products were well resolved from primary peak and its impurities, proving that the method is stability indicating. The developed method was validated as per International Conference on Harmonization guidelines with respect to specificity, limit of detection, limit of quantification, linearity, accuracy, precision, solution stability and robustness

A validated specific stability-indicating RP-HPLC assay method for Ambrisentan and its related substances.

Science.gov (United States)

Narayana, M B V; Chandrasekhar, K B; Rao, B M

2014-09-01

A validated specific stability-indicating reverse-phase liquid chromatographic method was developed for the quantitative determination of Ambrisentan as well as its related substances in bulk samples, pharmaceutical dosage forms in the presence of degradation products and its related impurities. Forced degradation studies were performed on bulk samples of Ambrisentan as per the ICH-prescribed stress conditions using acid, base, oxidative, thermal stress and photolytic degradation to show the stability-indicating power of the LC method. Significant degradation in acidic, basic stress conditions was observed and no degradation was observed in other stress conditions. The chromatographic method was optimized using the samples generated from the forced degradation studies and the impurity-spiked solution. Good resolution between the peaks corresponds to Ambrisentan-related impurities and degradation products from the analyte were achieved on a SunFire C18 column using a mobile phase consisting of a mixture of potassium dihydrogen orthophosphate at a pH adjusted to 2.5 with ortho-phosphoric acid in water and a mixture of acetonitrile:methanol using a simple linear gradient. The detection was carried out at 225 nm. The limit of detection and the limit of quantification for the Ambrisentan and its related impurities were established. The stressed test solutions were assayed against the qualified working standard of Ambrisentan and the mass balance in each case was between 98.9 and 100.3%, indicating that the developed LC method was stability indicating. Validation of the developed LC method was carried out as per the ICH requirements. The developed method was found to be suitable to check the quality of bulk samples of Ambrisentan at the time of batch release and also during its storage (long-term and accelerated stability). © The Author [2013]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Validated Stability-Indicating HPLC Method for Simultaneous Determination of Amoxicillin and Enrofloxacin Combination in an Injectable Suspension

Directory of Open Access Journals (Sweden)

Nidal Batrawi

2017-02-01

Full Text Available The combination of amoxicillin and enrofloxacin is a well-known mixture of veterinary drugs; it is used for the treatment of Gram-positive and Gram-negative bacteria. In the scientific literature, there is no high-performance liquid chromatography (HPLC-UV method for the simultaneous determination of this combination. The objective of this work is to develop and validate an HPLC method for the determination of this combination. In this regard, a new, simple and efficient reversed-phase HPLC method for simultaneous qualitative and quantitative determination of amoxicillin and enrofloxacin, in an injectable preparation with a mixture of inactive excipients, has been developed and validated. The HPLC separation method was performed using a reversed-phase (RP-C18e (250 mm × 4.0 mm, 5 μm column at room temperature, with a gradient mobile phase of acetonitrile and phosphate buffer containing methanol at pH 5.0, a flow rate of 0.8 mL/min and ultraviolet detection at 267 nm. This method was validated in accordance with the Food and Drug Administration (FDA and the International Conference on Harmonisation (ICH guidelines and showed excellent linearity, accuracy, precision, specificity, robustness, ruggedness, and system suitability results within the acceptance criteria. A stability-indicating study was also carried out and indicated that this method can also be used for purity and degradation evaluation of these formulations.

Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

Directory of Open Access Journals (Sweden)

Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

2016-06-01

Full Text Available Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm, using a mobile phase consisting of methanol-50 mM ammonium acetate buffer (containing 0.1% v/v trifluoroacetic acid and 0.1% v/v triethylamine, pH 2.5 (50:50 v/v at room temperature. The flow rate was 0.8 mL/min. Results: The method linearity was investigated in the range of 25–500 µg/mL (r > 0.9999. The LOD and LOQ were 5 and 25 µg/mL, respectively. The method selectivity was evaluated by peak purity test using a diode array detector. There was no interference among detection of doxycycline and its stressed degradation products. Total peak purity numbers were in the range of 0.94-0.99, indicating the homogeneity of DOX peaks. Conclusion: These data show the stability-indicating nature of the method for quality control of doxycycline in bulk samples and capsule dosage forms.

Nail psoriasis as a severity indicator: results from the PsoReal study

Directory of Open Access Journals (Sweden)

I Schäfer

2010-12-01

Full Text Available Marc A Radtke1, Anna K Langenbruch1, I Schäfer1, Katharina Herberger1, Kristian Reich2, Matthias Augustin11Institute for Health Services Research in Dermatology and Nursing, University Medical Center of Hamburg-Eppendorf, Hamburg; 2Dermatologikum Hamburg, GermanyBackground: Although nail psoriasis affects a substantial proportion of psoriasis patients and causes significant psychologic distress, few epidemiologic data characterizing patients with nail involvement are available. The aim of this research was to elucidate differences between patients with nail psoriasis and those without any nail involvement, taking quality indicators of health care from the patient's perspective into account.Methods: In total, 2449 patient members of the Deutscher Psoriasis Bund, the largest patient organization for psoriasis in Germany, were interviewed in this nationwide, noninterventional, cross-sectional study. Patients with nail psoriasis were compared with patients without any nail involvement with regard to gender, age, disease duration, affected body surface area, health-related quality of life (Dermatology Life Quality Index [DLQI] ED-5D, patient-defined treatment benefit, amount of inpatient treatments, disease duration, and numbers of work days lost.Results: Data from 2449 patients with psoriasis were analyzed. Overall, 44.8% (1078 of patients were female, mean age was 57.0 ± 11.7 years, and 72.8% had nail involvement and showed higher values for affected body surface area than those without nail involvement (8.3% versus 5.6%, respectively; P < 0.004. Health-related quality of life was significantly lower in patients with nail psoriasis (DLQI 7.2 versus 5.3; ED-5D 60.1 versus 67.3, who had more days off work (9.8 versus 3.3.Conclusion: Nail involvement is an important symptom of psoriasis and is associated with greater disease severity and quality of life impairment. Accordingly, management of psoriasis should include a special focus on nail

A validated stability-indicating RP-HPLC method for paracetamol and lornoxicam: Application to pharmaceutical dosage forms

Directory of Open Access Journals (Sweden)

Karunakaran Kulandaivelu

2014-01-01

Full Text Available A new method for the simultaneous determination of paracetamol (PR and lornoxicam (LR has been developed by reversed phase HPLC from the combination drug product. The separation achieved on C18 column using acetonitrile and 0.02 M potassium dihydrogen phosphate was in the ratio of 35:65 (v/v as mobile phase at a flow rate of 1.0 mL/min. Both the components were monitored at a single wavelength at 260 nm and the column temperature was maintained at 30°C throughout the analysis. A linear response was found in the concentration range of 125-375 μg/mL for PR and 2-6 μg/mL for LR, with the correlation coefficient of more than 0.999. Although the tablet contained a high dose of PR (500 mg and a low dose of LR (8 mg, the single HPLC method was developed and the intra as well as inter day precision was obtained at less than 2% of RSD. The accuracy results obtained were between 98% and 102%. The drug was intentionally degraded under acidic, basic, peroxide, thermal, and photolytic conditions. The major degradation observed for both PR and LR under peroxide condition indicated that the drug product is susceptible to oxidation. The degraded peaks were properly resolved from PR and LR. Hence, the method is stability indicating.

Drug utilization according to reason for prescribing: a pharmacoepidemiologic method based on an indication hierarchy

DEFF Research Database (Denmark)

Kildemoes, Helle Wallach; Hendriksen, Carsten; Morten, Andersen

2011-01-01

ABSTRACT Purpose To develop a pharmacoepidemiologic method for drug utilization analysis according to indication, gender, and age by means of register-based information. Statin utilization in 2005 was applied as an example. Methods Following the recommendations for statin therapy, we constructed ...

Competency Assessment Using Key Performance Indicators

OpenAIRE

Elena Alexandra Toader; Laura Brad

2015-01-01

The paper proposes a method for computing the scores of the key performance indicators resulted in the competency assessment process. The key performance indicators are estimated considering four performance levels that an IT professional can obtain at the end of the assessment process. We suggest as the best approach for estimating the performance key indicators an online questionnaire filled by 60 employees that work in IT Romanian companies. The results provide evidence that the difference...

Comparison of three different LCIA methods: EDIP97, CML2001 and Eco-indicator 99. Does it matter which one you choose

DEFF Research Database (Denmark)

Dreyer, Louise Camilla; Niemann, Anne Louise; Hauschild, Michael Zwicky

2003-01-01

?’ To investigate this issue, a comparison is performed of three frequently applied life cycle impact assessment methods. Methods. The three life cycle impact assessment methods EDIP97 (1), CML2001 (2) and Eco-indicator 99 (3) are compared on their performance through application to the same life cycle inventory...... of the EDIP97 and CML2001 output, differences up to two orders of magnitude are found for some of the indicator results for the impact categories describing toxicity to humans and ecosystems, and there is little similarity in the patterns of major contributors among the two methods. For human toxicity the CML......2001 score is dominated by contribution from metals while the EDIP97 score is caused by a solvent and nitrogen oxides. For aquatic ecotoxicity, metals are the main contributors for both methods but while it is vanadium for CML2001, it is strontium for EDIP97. After normalisation, the differences...

Indication for the operative methods in surgical treatment of cervical spondylotic myelopathy

International Nuclear Information System (INIS)

Kobayashi, Akira; Inoue, Shunichi; Watabe, Tsuneo; Nagase, Joji; Harada, Yoshitada

1984-01-01

Indication for the operative methods for cervical spondylotic myelopathy was examined in 16 patients undergoing CT-myelography before and after operation. There was a highly significant correlation between the anteroposterior (A-P) diameter of the spinal cord and clinical symptoms. Patients with shorter A-P diameter of the spinal cord tended to have severer preoperative clinical symptoms. Clinical symptoms improved as the post operative A-P diameter of the spinal cord increased. Fixation with decompression of the anterior spinal cord should be indicated when constriction of 5 mm or less of the spinal cord is seen segmentally at the level of the intervertebral disc. Dilation of the spinal cavity should be indicated when the constriction of the spinal cord is 5 mm or less at all levels of the cervical spinal cord. In performing fixation with anterior decompression, 15 mm is considered to be the most suitable width for complete and safe decompression of the flattened spinal cord with a wide transverse diameter. (Namekawa, K)

Fecal indicator bacteria at Havana Bay

International Nuclear Information System (INIS)

Lopez Perez, Lisse; Gomez D'Angelo, Yamiris; Beltran Gonzalez, Jesus; Alvarez Valiente, Reinaldo

2013-01-01

Aims: Fecal indicator bacteria concentrations were evaluated in Havana Bay. Methods: Concentrations of traditional fecal indicator bacteria were calculated between April 2010 and February 2011, by MPN methods. Concentrations of thermo tolerant coliform (CTT), Escherichia coli, fecal streptococci (EF), intestinal enterococci (ENT) in seawater, and Clostridium perfringens in sediment surface, were determined. Results: CTT and E. coli levels were far above Cuban water quality standard for indirect contact with water, showing the negative influence of sewage and rivers on the bay. The EF and ENT were measured during sewage spills at the discharge site and they were suitable indicators of fecal contamination, but these indicators didn't show the same behavior in other selected sites. This result comes from its well-known inactivation by solar light in tropical zones and the presumable presence of humid acids in the waters of the bay. Conclusion: Fecal indicator bacteria and its statistical relationships reflect recent and chronic fecal contamination at the bay and near shores.

A validated stability-indicating UPLC method for desloratadine and its impurities in pharmaceutical dosage forms.

Science.gov (United States)

Rao, Dantu Durga; Satyanarayana, N V; Malleswara Reddy, A; Sait, Shakil S; Chakole, Dinesh; Mukkanti, K

2010-02-05

A novel stability-indicating gradient reverse phase ultra-performance liquid chromatographic (RP-UPLC) method was developed for the determination of purity of desloratadine in presence of its impurities and forced degradation products. The method was developed using Waters Aquity BEH C18 column with mobile phase containing a gradient mixture of solvents A and B. The eluted compounds were monitored at 280nm. The run time was 8min within which desloratadine and its five impurities were well separated. Desloratadine was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Desloratadine was found to degrade significantly in oxidative and thermal stress conditions and stable in acid, base, hydrolytic and photolytic degradation conditions. The degradation products were well resolved from main peak and its impurities, thus proved the stability-indicating power of the method. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of desloratadine in pharmaceutical dosage forms.

Indicators and Managing for Results: Filling the Gap in Coach Transport Services

Directory of Open Access Journals (Sweden)

Marcos Thadeu Queiroz Magalhães

2018-02-01

Full Text Available Resumo Este artigo discute a Gestão por Resultados (MFR, no inglês em contratos de serviços de transporte de passageiros. Apresenta o Processo Integrado de Planejamento e como é possível unir, num único quadro, planejamento, monitoramento e avaliação. Após isso, são propostos um conjunto de indicadores de desempenho capazes de cobrir tanto os requisitos de gestão processual quanto finalística. Ao fim, comenta-se sobre os principais limitadores da proposta bem como fatores críticos de sucesso para a Gestão por Resultados voltada para os contratos de serviço de transporte de passageiros. Palavras-Chave: Gestão por Resultados, Transporte de Passageiros, Indicadores, Avaliação, Planejamento Orientado a Resultados. Abstract This paper discusses MFR (Managing for Results in Coach Transport Contract Management. It presents an Integrated Planning Process and shows how it is possible to merge planning, monitoring and assessing activities into one single framework. After that, we propose a set of performance indicators that are able to cope with both procedural and finalistic performance management requirements. Finally, we comment some limitations of the research and present some critical factors for success of MFR in Coach Transport Contract Management. Key-Words: Managing for Results, Coach Transport Services, Indicators, Evaluation, Result-Oriented Planning.

PALEOEARTHQUAKES IN THE PRIBAIKALIE: METHODS AND RESULTS OF DATING

Directory of Open Access Journals (Sweden)

Oleg P. Smekalin

2010-01-01

Full Text Available In the Pribaikalie and adjacent territories, seismogeological studies have been underway for almost a half of the century and resulted in discovery of more than 70 dislocations of seismic or presumably seismic origin. With commencement of paleoseismic studies, dating of paleo-earthquakes was focused on as an indicator useful for long-term prediction of strong earthquakes. V.P. Solonenko [Solonenko, 1977] distinguished five methods for dating paleoseismogenic deformations, i.e. geological, engineering geological, historico-archeological, dendrochronological and radiocarbon methods. However, ages of the majority of seismic deformations, which were subject to studies at the initial stage of development of seismogeology in Siberia, were defined by methods of relative or correlation age determination.Since the 1980s, studies of seismogenic deformation in the Pribaikalie have been widely conducted with trenching. Mass sampling, followed with radiocarbon analyses and definition of absolute ages of paleo-earthquakes, provided new data on seismic regimes of the territory and rates of and recent displacements along active faults, and enhanced validity of methods of relative dating, in particular morphometry. Capacities of the morphometry method has significantly increased with introduction of laser techniques in surveys and digital processing of 3D relief models.Comprehensive seismogeological studies conducted in the Pribaikalie revealed 43 paleo-events within 16 seismogenic structures. Absolute ages of 18 paleo-events were defined by the radiocarbon age determination method. Judging by their ages, a number of dislocations were related with historical earthquakes which occurred in the 18th and 19th centuries, yet any reliable data on epicenters of such events are not available. The absolute and relative dating methods allowed us to identify sections in some paleoseismogenic structures by differences in ages of activation and thus provided new data for

Assessing agro-environmental performance of dairy farms in northwest Italy based on aggregated results from indicators.

Science.gov (United States)

Gaudino, Stefano; Goia, Irene; Grignani, Carlo; Monaco, Stefano; Sacco, Dario

2014-07-01

Dairy farms control an important share of the agricultural area of Northern Italy. Zero grazing, large maize-cropped areas, high stocking densities, and high milk production make them intensive and prone to impact the environment. Currently, few published studies have proposed indicator sets able to describe the entire dairy farm system and their internal components. This work had four aims: i) to propose a list of agro-environmental indicators to assess dairy farms; ii) to understand which indicators classify farms best; iii) to evaluate the dairy farms based on the proposed indicator list; iv) to link farmer decisions to the consequent environmental pressures. Forty agro-environmental indicators selected for this study are described. Northern Italy dairy systems were analysed considering both farmer decision indicators (farm management) and the resulting pressure indicators that demonstrate environmental stress on the entire farming system, and its components: cropping system, livestock system, and milk production. The correlations among single indicators identified redundant indicators. Principal Components Analysis distinguished which indicators provided meaningful information about each pressure indicator group. Analysis of the communalities and the correlations among indicators identified those that best represented farm variability: Farm Gate N Balance, Greenhouse Gas Emission, and Net Energy of the farm system; Net Energy and Gross P Balance of the cropping system component; Energy Use Efficiency and Purchased Feed N Input of the livestock system component; N Eco-Efficiency of the milk production component. Farm evaluation, based on the complete list of selected indicators demonstrated organic farming resulted in uniformly high values, while farms with low milk-producing herds resulted in uniformly low values. Yet on other farms, the environmental quality varied greatly when different groups of pressure indicators were considered, which highlighted the

A digital image-based method for determining of total acidity in red wines using acid-base titration without indicator.

Science.gov (United States)

Tôrres, Adamastor Rodrigues; Lyra, Wellington da Silva; de Andrade, Stéfani Iury Evangelista; Andrade, Renato Allan Navarro; da Silva, Edvan Cirino; Araújo, Mário César Ugulino; Gaião, Edvaldo da Nóbrega

2011-05-15

This work proposes the use of digital image-based method for determination of total acidity in red wines by means of acid-base titration without using an external indicator or any pre-treatment of the sample. Digital images present the colour of the emergent radiation which is complementary to the radiation absorbed by anthocyanines present in wines. Anthocyanines change colour depending on the pH of the medium, and from the variation of colour in the images obtained during titration, the end point can be localized with accuracy and precision. RGB-based values were employed to build titration curves, and end points were localized by second derivative curves. The official method recommends potentiometric titration with a NaOH standard solution, and sample dilution until the pH reaches 8.2-8.4. In order to illustrate the feasibility of the proposed method, titrations of ten red wines were carried out. Results were compared with the reference method, and no statistically significant difference was observed between the results by applying the paired t-test at the 95% confidence level. The proposed method yielded more precise results than the official method. This is due to the trivariate nature of the measurements (RGB), associated with digital images. Copyright © 2011 Elsevier B.V. All rights reserved.

Methods for evaluation and comparison of display indicators

International Nuclear Information System (INIS)

Azarm, M.A.; Hsu, F.; Vesely, W.E.

1991-01-01

This paper summarizes a procedure and associated methodologies for evaluating the operational characteristics of display indicators. This research was conducted as a part of the Risk-Based performance Indicator (RBPI) project under the auspices of the US Nuclear Regulatory Commission (NRC) for the Office of Research (Res.). The recommended procedure and associated methodologies have been utilized to evaluate the capabilities of four candidate system unavailability indicators presently under study by NRC/Res

Norway's ICT Accessibility Legislation, Methods and Indicators.

Science.gov (United States)

Rygg, Malin; Rømen, Dagfinn; Sterri, Brynhild Runa

2016-01-01

This paper gives an overview of the Norwegian legislation on Universal Design of information and communication technology (ICT) and how the Norwegian Authority for Universal Design of ICT works to enforce and achieve the goals behind the legislation. The Authority uses indicators to check websites for compliance with the regulations. This paper describes the rationale and intended use for the indicators and how they are used for both supervision and benchmarks as well as a way of gathering data to give an overview of the current state of Universal Design of websites in Norway.

A Comprehensive System of Energy Intensity Indicators for the US: Methods, Data and Key Trends

Energy Technology Data Exchange (ETDEWEB)

Belzer, David B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bender, Sadie R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cort, Katherine A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-06-29

This report provides an update to a previously published (Rev 1) report that describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2011 relative to a 1985 base year. Discussion of energy intensity indicators for each of the broad end-use sectors of the economy—residential, commercial, industrial, and transportation—is presented in the report. An analysis of recent changes in the efficiency of electricity generation in the U.S. is also included. A detailed appendix describes the data sources and methodology behind the energy intensity indicators for each sector.

Danish gynecologists' opinion about hysterectomy on benign indication: results of a survey

DEFF Research Database (Denmark)

Gimbel, Helga; Ottesen, Bent; Tabor, Ann

2002-01-01

appropriate for each case. In cases of hysterectomy the gynecologists were asked to rate the appropriateness of oophorectomy. Questions about age, employment, geographic area, sex of the gynecologist and preference of the hysterectomy method for themselves/their wives were included. RESULTS. THE RESPONSE RATE...... WAS: 73%. For women aged > or = 50 years meno-metrorrhagia and symptomatic fibroids seemed to be important for hysterectomy recommendations, and for those aged Employment, gender...... and geographic area influenced the recommendation of hysterectomy, and employment and geographic area only for the recommended method. Most of the gynecologists recommended the abdominal route and preferred the subtotal method. The gynecologists agreed on the recommendation concerning oophorectomy in cases...

Bone-anchored hearing aid (BAHA: indications, functional results, and comparison with reconstructive surgery of the ear

Directory of Open Access Journals (Sweden)

Bento, Ricardo Ferreira

2012-01-01

Full Text Available Introduction: The bone-anchored hearing aid (BAHA is a bone conduction hearing device that transmits sound directly into the inner ear. It is mainly used in patients with conductive hearing loss associated with aural atresia, but it is also used in those with mixed and sensorineural hearing loss. Goals: To review the main indications for BAHA, to analyze the audiometric results and its benefits for patients and compare them with other treatment modalities, and to compare the literature data with our sample of 13 patients. Method: The research was performed using a database covering works in English, Spanish, and Portuguese, with no limitations in the years when the procedures were performed. We compared the literature data with our results for the 13 patients who underwent BAHA implantation between the years 2000 and 2009. Results: Most of the studies showed that BAHA has great advantages over reconstructive surgery in terms of hearing results, complications, and disease recurrence. The postoperative results for our 13 patients were satisfactory and comparable with the results from the literature, with closure of the air-bone gap in 7 patients and achieving an air-bone gap of 10 dB in 6 patients. No postoperative complications were observed. Conclusion: BAHA is a better treatment option than reconstructive surgery for patients with bilateral deafness. It is a relatively simple surgical procedure with few complications and good hearing results. Recent studies have examined its use in conductive and unilateral sensorineural hearing loss.

Is a positive L-dimer result a sufficient indication for performing a V/Q lung scan?

International Nuclear Information System (INIS)

Salanitri, G.C.; Kelly, M.J.; O'Donnell, M.; Kalff, V.

2002-01-01

Full text: At our institution there has developed a practice of referring some patients for assessment of pulmonary embolism (PE) because of a positive L-dimer test but without standard clinical indications. Therefore this study aimed to determine whether a positive L-dimer test result by itself is a sufficient indication to perform a ventilation/perfusion V/Q study. V/Q lung scan results, L-dimer test results and appropriate radiology results of 949 consecutive patients from August 2000 to October 2001 were retrospectively reviewed. Prediction of V/Q results by L-dimer results was compared with that of clinical risk factors for PE (Risk factor + or -) These factors were dyspnoea, current deep vein thrombosis (DVT), recent orthopaedic procedure or a past history of PE/DVT, Of the 949 patients in the study population, 254 patients had an L-dimer study, with 206 positive and 48 negative L-dimer results. Helical CT was performed in 8 patients with an equivocal V/Q - 4 showed PE and 4 did not. In the 27 patients with a positive L-dimer result and PE on either V-Q scan or CT, 25 (92.6%) had additional recognised major risk factors for PE. A positive L-dimer test is a poor predictor of a positive V/Q scan compared to conventional clinical indications. Thus, a positive L-dimer test result in isolation does not constitute an appropriate indication to perform a V/Q scan. Copyright (2002) The Australian and New Zealand Society of Nuclear Medicine Inc

Evaluation of different shadow detection and restoration methods and their impact on vegetation indices using UAV high-resolution imageries over vineyards

Science.gov (United States)

Aboutalebi, M.; Torres-Rua, A. F.; McKee, M.; Kustas, W. P.; Nieto, H.

2017-12-01

Shadows are an unavoidable component of high-resolution imagery. Although shadows can be a useful source of information about terrestrial features, they are a hindrance for image processing and lead to misclassification errors and increased uncertainty in defining surface reflectance properties. In precision agriculture activities, shadows may affect the performance of vegetation indices at pixel and plant scales. Thus, it becomes necessary to evaluate existing shadow detection and restoration methods, especially for applications that makes direct use of pixel information to estimate vegetation biomass, leaf area index (LAI), plant water use and stress, chlorophyll content, just to name a few. In this study, four high-resolution imageries captured by the Utah State University - AggieAir Unmanned Aerial Vehicle (UAV) system flown in 2014, 2015, and 2016 over a commercial vineyard located in the California for the USDA-Agricultural Research Service Grape Remote sensing Atmospheric Profile and Evapotranspiration Experiment (GRAPEX) Program are used for shadow detection and restoration. Four different methods for shadow detection are compared: (1) unsupervised classification, (2) supervised classification, (3) index-based method, and (4) physically-based method. Also, two different shadow restoration methods are evaluated: (1) linear correlation correction, and (2) gamma correction. The models' performance is evaluated over two vegetation indices: normalized difference vegetation index (NDVI) and LAI for both sunlit and shadowed pixels. Histogram and analysis of variance (ANOVA) are used as performance indicators. Results indicated that the performance of the supervised classification and the index-based method are better than other methods. In addition, there is a statistical difference between the average of NDVI and LAI on the sunlit and shadowed pixels. Among the shadow restoration methods, gamma correction visually works better than the linear correlation

Surgical Indications and Clinical Results of Patients with Exchanged Intraocular Lenses in a Tertiary Eye Hospital

Directory of Open Access Journals (Sweden)

Sevim Kavuncu

2016-08-01

Full Text Available Objectives: To evaluate the demographics, surgical indications and clinical results of patients with repositioned or explanted intraocular lens (IOL in a tertiary referral eye hospital. Materials and Methods: Forty-eight eyes of 48 patients that underwent surgery to exchange or reposition the IOL at Ulucanlar Eye Training and Research Hospital between 2009 and 2013 were included in the study. Medical records of patients were evaluated for surgical indications, time elapsed since initial operation, preoperative and postoperative best corrected distance visual acuity and the presence of ocular disease. Results: The mean age of the 31 male and 17 female patients was 64.91±14.26 years. Median time between the initial and final operations was 36.0 months. Pseudoexfoliation syndrome (PEX was present in 25% of the patients. There was history of previous vitreoretinal surgery in 18.8% of patients, ocular trauma in 6.3%, high myopia and refractive surgery in 4% of patients. In the first operation the IOL was implanted in the sulcus in 50%, in the bag in 27.1%, and in the anterior chamber in 20.8%; following the final surgery the IOL was in the sulcus in 27.1%, in the anterior chamber in 22.9%, and fixated to the sclera in 10.4% of the patients, while the remaining 29.1% remained aphakic. Indication for the secondary surgery was IOL dislocation in 58%, corneal decompensation in 20.8% and IOL degeneration in 6.3%. In the final surgery, IOL was exchanged in 54.2% of the cases, removed in 31.3% of cases, and repositioned in 14.6%. Visual acuity improved by 1-3 lines in 52.3% and remained stable in 13.6% of the patients postoperatively. Conclusion: IOL exchange may be necessary at any time following cataract surgery due to surgical complications, IOL dislocation, biometric measurement errors and corneal decompensation. Factors such as vitreoretinal surgery and the existence of PEX increase the risk of IOL exchange surgery.

A Capacity-Restraint Transit Assignment Model When a Predetermination Method Indicates the Invalidity of Time Independence

Directory of Open Access Journals (Sweden)

Haoyang Ding

2015-01-01

Full Text Available The statistical independence of time of every two adjacent bus links plays a crucial role in deciding the feasibility of using many mathematical models to analyze urban transit networks. Traditional research generally ignores the time independence that acts as the ground of their models. Assumption is usually made that time independence of every two adjacent links is sound. This is, however, actually groundless and probably causes problematic conclusions reached by corresponding models. Many transit assignment models such as multinomial probit-based models lose their effects when the time independence is not valid. In this paper, a simple method to predetermine the time independence is proposed. Based on the predetermination method, a modified capacity-restraint transit assignment method aimed at engineering practice is put forward and tested through a small contrived network and a case study in Nanjing city, China, respectively. It is found that the slope of regression equation between the mean and standard deviation of normal distribution acts as the indicator of time independence at the same time. Besides, our modified assignment method performs better than the traditional one with more reasonable results while keeping the property of simplicity well.

A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends

Energy Technology Data Exchange (ETDEWEB)

Belzer, D. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-08-01

This report describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2011 relative to a 1985 base year.

The WOMBAT Attack Attribution Method: Some Results

Science.gov (United States)

Dacier, Marc; Pham, Van-Hau; Thonnard, Olivier

In this paper, we present a new attack attribution method that has been developed within the WOMBAT project. We illustrate the method with some real-world results obtained when applying it to almost two years of attack traces collected by low interaction honeypots. This analytical method aims at identifying large scale attack phenomena composed of IP sources that are linked to the same root cause. All malicious sources involved in a same phenomenon constitute what we call a Misbehaving Cloud (MC). The paper offers an overview of the various steps the method goes through to identify these clouds, providing pointers to external references for more detailed information. Four instances of misbehaving clouds are then described in some more depth to demonstrate the meaningfulness of the concept.

Investigations of the Propagation of Plant Pollen by an Indicator Activation Method

Energy Technology Data Exchange (ETDEWEB)

Fendrik, I.; Glubrecht, H. [Technische Hochschule, Hanover (Germany)

1967-10-15

The study of the propagation of plant pollen is of special interest in ecology and plant breeding. Generally, radioactive labelling cannot be applied for this purpose since radioactive contamination of the materials under investigation cannot be tolerated. Instead, labelling can be performed by the use of an indicator element that has a high cross-section for neutron activation. This substance is introduced into the plant under consideration. The flying pollen is caught by polyethylene foils by means of electrostatic attraction. The foils with the pollen are irradiated in a nuclear reactor with a suitable flux of thermal neutrons. The labelled pollen grains can be detected and counted by autoradiography or by direct measurement. The method has proved satisfactory for pines and sugar beet. Indicator elements used for detection by neutron activation were manganese and dysprosium. (author)

Energy management in production: A novel method to develop key performance indicators for improving energy efficiency

International Nuclear Information System (INIS)

May, Gökan; Barletta, Ilaria; Stahl, Bojan; Taisch, Marco

2015-01-01

Highlights: • We propose a 7-step methodology to develop firm-tailored energy-related KPIs (e-KPIs). • We provide a practical guide for companies to identify their most important e-KPIs. • e-KPIs support identification of energy efficiency improvement areas in production. • The method employs an action plan for achieving energy saving targets. • The paper strengthens theoretical base for energy-based decision making in manufacturing. - Abstract: Measuring energy efficiency performance of equipments, processes and factories is the first step to effective energy management in production. Thus, enabled energy-related information allows the assessment of the progress of manufacturing companies toward their energy efficiency goals. In that respect, the study addresses this challenge where current industrial approaches lack the means and appropriate performance indicators to compare energy-use profiles of machines and processes, and for the comparison of their energy efficiency performance to that of competitors’. Focusing on this challenge, the main objective of the paper is to present a method which supports manufacturing companies in the development of energy-based performance indicators. For this purpose, we provide a 7-step method to develop production-tailored and energy-related key performance indicators (e-KPIs). These indicators allow the interpretation of cause-effect relationships and therefore support companies in their operative decision-making process. Consequently, the proposed method supports the identification of weaknesses and areas for energy efficiency improvements related to the management of production and operations. The study therefore aims to strengthen the theoretical base necessary to support energy-based decision making in manufacturing industries

Stability-indicating methods for the determination of racecadotril in the presence of its degradation products.

Science.gov (United States)

Mohamed, Afaf O; Fouad, Manal M; Hasan, Mona M; Abdel Razeq, Sawsan A; Elsherif, Zeinab A

2009-12-01

Three stability-indicating methods were developed for the determination of racecadotril (RCT) in the presence of its alkaline degradation products. The first was an HPLC method in which efficient chromatographic separation was achieved on a C18 analytical column and a mobile phase of acetonitrile-methanol-water-acetic acid (52:28:20:0.1, v/v/v/v). Linearity was obtained in the range of 4-40 microg/mL with mean accuracy of 99.5 +/- 0.88%. The second method was a densitometric evaluation of thin-layer chromatograms of the drug using a mobile phase of isopropanol-ammonia (33%)-n-hexane (9:0.5:20, v/v/v). The chromatograms were scanned at 232 nm, a wavelength at which RCT can be readily separated from its degradation products and determined in the range of 2-20 microg per spot with mean accuracy of 99.5 +/- 0.56%. The third method is based on the use of first-derivative spectrophotometry (D1) at 240 nm, and the drug was determined in the range of 5-40 microg/mL with mean accuracy of 99.2 +/- 1.02%. The three methods provided satisfactory recovery of the intact drug (100.8 +/- 0.82, 100.4 +/- 0.55, and 99.9 +/- 0.72%, respectively) in the presence of up to 90% of its degradation products. Determination was also successful when analyzing RCT in a formulation in the form of acetorphan packets. Results were statistically analyzed and found to be in accordance with those given by a reported method.

A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends

Energy Technology Data Exchange (ETDEWEB)

Belzer, David B.

2014-08-31

This report describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia Index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2010 relative to a 1985 base year. Discussion of energy intensity indicators for each of the broad end-use sectors of the economy—residential, commercial, industrial, and transportation—is presented in the report. An analysis of recent changes in the efficiency of electricity generation in the U.S. is also included. A detailed appendix describes the data sources and methodology behind the energy intensity indicators for each sector.

Methods of Estimation the Reliability and Increasing the Informativeness of the Laboratory Results (Analysis of the Laboratory Case of Measurement the Indicators of Thyroid Function)

OpenAIRE

N A Kovyazina; N A Alhutova; N N Zybina; N M Kalinina

2014-01-01

The goal of the study was to demonstrate the multilevel laboratory quality management system and point at the methods of estimating the reliability and increasing the amount of information content of the laboratory results (on the example of the laboratory case). Results. The article examines the stages of laboratory quality management which has helped to estimate the reliability of the results of determining Free T3, Free T4 and TSH. The measurement results are presented by the expanded unce...

[Evaluation method with radiographic image quality indicator for internal defects of dental casting metallic restoration].

Science.gov (United States)

Li, Y; Zheng, G; Lin, H

2014-12-18

To develop a new kind of dental radiographic image quality indicator (IQI) for internal quality of casting metallic restoration to influence on its usage life. Radiographic image quality indicator method was used to evaluate the depth of the defects region and internal quality of 127 casting metallic restoration and the accuracy was compared with that of conventional callipers method. In the 127 cases of casting metallic restoration, 9 were found the thickness less than 0.7 mm and the thinnest thickness only 0.2 mm in 26 casting metallic crowns or bridges' occlusal defects region. The data measured by image quality indicator were consistent with those measured by conventional gauging. Two metal inner crowns were found the thickness less than 0.3 mm in 56 porcelain crowns or bridges. The thickness of casting removable partial denture was more than 1.0 mm, but thinner regions were not found. It was found that in a titanium partial denture, the X-ray image of clasp was not uniform and there were internal porosity defects in the clasp. Special dental image quality indicator can solve the visual error problems caused by different observing backgrounds and estimate the depth of the defects region in the casting.

Methods for the guideline-based development of quality indicators--a systematic review

Science.gov (United States)

2012-01-01

Background Quality indicators (QIs) are used in many healthcare settings to measure, compare, and improve quality of care. For the efficient development of high-quality QIs, rigorous, approved, and evidence-based development methods are needed. Clinical practice guidelines are a suitable source to derive QIs from, but no gold standard for guideline-based QI development exists. This review aims to identify, describe, and compare methodological approaches to guideline-based QI development. Methods We systematically searched medical literature databases (Medline, EMBASE, and CINAHL) and grey literature. Two researchers selected publications reporting methodological approaches to guideline-based QI development. In order to describe and compare methodological approaches used in these publications, we extracted detailed information on common steps of guideline-based QI development (topic selection, guideline selection, extraction of recommendations, QI selection, practice test, and implementation) to predesigned extraction tables. Results From 8,697 hits in the database search and several grey literature documents, we selected 48 relevant references. The studies were of heterogeneous type and quality. We found no randomized controlled trial or other studies comparing the ability of different methodological approaches to guideline-based development to generate high-quality QIs. The relevant publications featured a wide variety of methodological approaches to guideline-based QI development, especially regarding guideline selection and extraction of recommendations. Only a few studies reported patient involvement. Conclusions Further research is needed to determine which elements of the methodological approaches identified, described, and compared in this review are best suited to constitute a gold standard for guideline-based QI development. For this research, we provide a comprehensive groundwork. PMID:22436067

A validated stability-indicating HPLC method for the simultaneous determination of pheniramine maleate and naphazoline hydrochloride in pharmaceutical formulations.

Science.gov (United States)

Huang, Taomin; Chen, Nianzu; Wang, Donglei; Lai, Yonghua; Cao, Zhijuan

2014-02-01

A simple, rapid, and accurate stability-indicating reverse phase liquid chromatographic method was developed and validated for the simultaneous determination of pheniramine maleate and naphazoline hydrochloride in bulk drugs and pharmaceutical formulations. Optimum chromatographic separations among pheniramine maleate, naphazoline hydrochloride and stress-induced degradation products have been achieved within 10 minutes by using an Agilent zorbax eclipse XDB C18 column (150 mm × 4.6 mm, 5 μm) as the stationary phase with a mobile phase consisted of 10 mM phosphate buffer pH 2.8 containing 0.5% triethlamine and methanol (68:32, v/v) at a flow rate of 1 mL min-1. Detection was performed at 280 nm using a diode array detector. Theoretical plates for pheniramine maleate and naphazoline hydrochloride were calculated to be 6762 and 6475, respectively. The method was validated in accordance with ICH guidelines with respect to linearity, accuracy, precision, robustness, specificity, limit of detection and quantitation. Regression analysis showed good correlations (R2 > 0.999) for pheniramine maleate in the concentration range of 150-1200 μg mL-1 and naphazoline hydrochloride in 12.5-100 μg mL-1. The method results in excellent separation of both the analytes and degradation products. The peak purity factor is ≥980 for both analytes after all types of stress, indicating complete separation of both analyte peaks from the stress induced degradation products. Overall, the proposed stability-indicating method was suitable for routine quality control and drug analysis of pheniramine maleate and naphazoline hydrochloride in pharmaceutical formulations.

The Method for Assessing and Forecasting Value of Knowledge in SMEs – Research Results

Directory of Open Access Journals (Sweden)

Justyna Patalas-Maliszewska

2010-10-01

Full Text Available Decisions by SMEs regarding knowledge development are made at a strategic level (Haas-Edersheim, 2007. Related to knowledge management are approaches to "measure" knowledge, where literature distinguishes between qualitative and quantitative methods of valuating intellectual capital. Although there is a quite range of such methods to build an intellectual capital reporting system, none of them is really widely recognized. This work presents a method enabling assessing the effectiveness of investing in human resources, taking into consideration existing methods. The method presented is focusing on SMEs (taking into consideration their importance for, especially, regional development. It consists of four parts: an SME reference model, an indicator matrix to assess investments into knowledge, innovation indicators, and the GMDH algorithm for decision making. The method presented is exemplified by a case study including 10 companies.

Raw material consumption of the European Union--concept, calculation method, and results.

Science.gov (United States)

Schoer, Karl; Weinzettel, Jan; Kovanda, Jan; Giegrich, Jürgen; Lauwigi, Christoph

2012-08-21

This article presents the concept, calculation method, and first results of the "Raw Material Consumption" (RMC) economy-wide material flow indicator for the European Union (EU). The RMC measures the final domestic consumption of products in terms of raw material equivalents (RME), i.e. raw materials used in the complete production chain of consumed products. We employed the hybrid input-output life cycle assessment method to calculate RMC. We first developed a highly disaggregated environmentally extended mixed unit input output table and then applied life cycle inventory data for imported products without appropriate representation of production within the domestic economy. Lastly, we treated capital formation as intermediate consumption. Our results show that services, often considered as a solution for dematerialization, account for a significant part of EU raw material consumption, which emphasizes the need to focus on the full production chains and dematerialization of services. Comparison of the EU's RMC with its domestic extraction shows that the EU is nearly self-sufficient in biomass and nonmetallic minerals but extremely dependent on direct and indirect imports of fossil energy carriers and metal ores. This implies an export of environmental burden related to extraction and primary processing of these materials to the rest of the world. Our results demonstrate that internalizing capital formation has significant influence on the calculated RMC.

[Infection prevention in Dutch hospitals; results say more than process indicators].

Science.gov (United States)

Bonten, Marc J M; Friedrich, Alexander; Kluytmans, Jan A J W; Vandenbroucke-Grauls, Christina M J E; Voss, Andreas; Vos, Margreet C

2014-01-01

The Dutch Health Care Inspectorate investigated the preparedness of Dutch hospitals for the emergence of antibiotic resistance, and concluded that hospitals are not well prepared and are insufficiently aware that infection prevention is a prerequisite for patient safety. These conclusions are based on observations of process indicators of current practice guidelines, without including the available outcome indicators that demonstrate the persistently low incidence of infections with antibiotic resistant bacteria in Dutch hospitals. The conclusions may have negative effects on the quality of infection prevention in Dutch hospitals. Therefore, it is advisable to use outcome indicators rather than process indicators to evaluate the quality of infection prevention.

Effect of conventional cooking methods on lipid oxidation indices in lamb meat

Directory of Open Access Journals (Sweden)

A Pourkhalili

2012-05-01

Full Text Available Lipid oxidation is one of the most deteriorative reactions occurred in foodstuff which has harmful impacts on the both food quality and consumer's health. This study was designed to speculate the influence of three conventional cooking methods including boiling, frying and grilling on lipid oxidation parameters in cooked lamb meat. Sections of lamb meat from longissimus dorsi muscle, taken from native Lori-Bakhtiary sheep species were cut into uniform pieces and cooked using boiling, frying and roasting methods according to the cooking routine and tradition in Iranian society, in terms of temperature and time. Proximate compositions (moisture, lipid, ash and protein in the raw and cooked meat were determined using the standard methods of analysis. Moreover, weight loss was measured after each treatment. Lipid oxidation parameters such as peroxide value, conjugated diene and TBARS indices were measured in the raw and cooked samples. Evaluation of lipid oxidation parameters showed that peroxide value was significantly decreased in all cooked samples. In contrast, conjugated diene value was significantly increased in the fried and grilled samples (p

CT-guided percutaneous neurolysis methods. State of the art and first results

International Nuclear Information System (INIS)

Schneider, B.; Richter, G.M.; Roeren, T.; Kauffmann, G.W.

1996-01-01

We used 21G or 22G fine needles. All CT-guided percutaneous neurolysis methods require a proper blood coagulation. Most common CT scanners are suitable for neurolysis if there is enough room for maintaining sterile conditions. All neurolysis methods involve sterile puncture of the ganglia under local anesthesia, a test block with anesthetic and contrast agent to assess the clinical effect and the definitive block with a mixture of 96% ethanol and local anesthetic. This allows us to correct the position of the needle if we see improper distribution of the test block or unwanted side effects. Though inflammatory complications of the peritoneum due to puncture are rarely seen, we prefer the dorsal approach whenever possible. Results: Seven of 20 legs showed at least transient clinical improvement after CT-guided lumbar sympathectomies; 13 legs had to be amputated. Results of the methods in the literature differ. For lumbar sympathectomy, improved perfusion is reported in 39-89%, depending on the pre-selection of the patient group. Discussion: It was recently proved that sympathectomy not only improves perfusion of the skin but also of the muscle. The hypothesis of a steal effect after sympathectomy towards skin perfusion was disproved. Modern aggressive surgical and interventional treatment often leaves patients to sympathectomy whose reservers of collateralization are nearly exhausted. We presume this is the reason for the different results we found in our patient group. For thoracic sympathectomy the clinical treatment depends very much on the indications. Whereas palmar hyperhidrosis offers nearly 100% success, only 60-70% of patients with disturbance of perfusion have benefited. Results in celiac ganglia block also differ. Patients with carcinoma of the pancreas and other organs of the upper abdomen benefit in 80-100% of all cases, patients with chronic pancreatitis in 60-80%. (orig./VHE) [de

How to Choose? Using the Delphi Method to Develop Consensus Triggers and Indicators for Disaster Response.

Science.gov (United States)

Lis, Rebecca; Sakata, Vicki; Lien, Onora

2017-08-01

To identify key decisions along the continuum of care (conventional, contingency, and crisis) and the critical triggers and data elements used to inform those decisions concerning public health and health care response during an emergency. A classic Delphi method, a consensus-building survey technique, was used with clinicians around Washington State to identify regional triggers and indicators. Additionally, using a modified Delphi method, we combined a workshop and single-round survey with panelists from public health (state and local) and health care coalitions to identify consensus state-level triggers and indicators. In the clinical survey, 122 of 223 proposed triggers or indicators (43.7%) reached consensus and were deemed important in regional decision-making during a disaster. In the state-level survey, 110 of 140 proposed triggers or indicators (78.6%) reached consensus and were deemed important in state-level decision-making during a disaster. The identification of consensus triggers and indicators for health care emergency response is crucial in supporting a comprehensive health care situational awareness process. This can inform the creation of standardized questions to ask health care, public health, and other partners to support decision-making during a response. (Disaster Med Public Health Preparedness. 2017;11:467-472).

Flammability Indices for Refrigerants

Science.gov (United States)

Kataoka, Osami

This paper introduces a new index to classify flammable refrigerants. A question on flammability indices that ASHRAE employs arose from combustion test results of R152a and ammonia. Conventional methods of not only ASHRAE but also ISO and Japanese High-pressure gas safety law to classify the flammability of refrigerants are evaluated to show why these methods conflict with the test results. The key finding of this paper is that the ratio of stoichiometric concentration to LFL concentration (R factor) represents the test results most precisely. In addition, it has excellent correlation with other flammability parameters such as flame speed and pressure rise coefficient. Classification according to this index gives reasonable flammability order of substances including ammonia, R152a and carbon monoxide. Theoretical background why this index gives good correlation is also discussed as well as the insufficient part of this method.

Stability Indicating RP-HPLC Method for Determination of Valsartan in Pure and Pharmaceutical Formulation

Directory of Open Access Journals (Sweden)

S. K. Patro

2010-01-01

Full Text Available A simple, rapid and accurate and stability indicating RP-HPLC method was developed for the determination of valsartan in pure and tablet forms. The method showed a linear response for concentrations in the range of 50-175 µg/mL using 0.01 M NH4H2PO4 (pH 3.5 buffer: methanol [50:50] as the mobile phase with detection at 210 nm and a flow rate of 1 mL/min and retention time 11.041 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, forced degradation, solution stability and selectivity. Quantitative and recovery studies of the dosage form were also carried out and analyzed; the % RSD from recovery studies was found to be less than 1. Due to simplicity, rapidity and accuracy of the method, we believe that the method will be useful for routine quality control analysis.

Development and validation of a stability-indicating LC method for the assay of lodenafil carbonate in tablets.

Science.gov (United States)

Codevilla, Cristiane Franco; Lemos, Alice Machado; Delgado, Leila Schreiner; Rolim, Clarice Madalena Bueno; Adams, Andréa Inês Horn; Bergold, Ana Maria

2011-08-01

A stability-indicating liquid chromatographic method has been developed for the quantitative determination of lodenafil carbonate in tablets. The method employs a Synergi Fusion C18 column (250 × 4.6 mm, i.d., 4 μm particle size), with mobile phase consisting of a mixture of methanol-acetic acid 0.1% pH 4.0 (65:35, v/v) and UV detection at 290 nm, using a photodiode array detector. A linear response (r = 0.9999) was observed in the range of 10-80 μg/mL. The method showed good recoveries (average 100.3%) and also intra and inter-day precision (RSD lodenafil carbonate peak. The method was found to be stability-indicating and due to its simplicity and accuracy can be applied for routine quality control analysis of lodenafil carbonate in tablets.

Stability Indicating RP-HPLC Method for Simultaneous Determination of Aspirin and Clopidrogel in Dosage Form

International Nuclear Information System (INIS)

Mohd Gousuddin; Sengupta, P.; Tripathi, V.D.; Das, A.

2016-01-01

Stability-indicating High Performance Liquid Chromatographic (HPLC) method was developed for simultaneous Aspirin and Clopidogrel, A Phenomenex Gemini C-18, 5 μm column having 250 mm x 4.6 mm i.d. in isocratic mode, with mobile phase containing buffer solution 0.3 % orthophosphoric acid : acetonitrile (65:35, v/v). The flow rate was 1 ml/ min and effluents were monitored at 266 nm. For linearity seven points calibration curve were obtained in a concentration range from 0.030-0.120 mg/ ml for aspirin and 0.015-0.060 mg/ ml for clopidogrel with correlation coefficient 0.9999. In the present study stability indicating HPLC method for the combination was tested by degrading the drugs together under various stress conditions like acid hydrolysis, base hydrolysis, oxidation, thermal and photolytic stress which is recommended by ICH guideline. (author)

Trace analysis of cyanide by ion-selective electrode indicator technique

International Nuclear Information System (INIS)

Tom, R.L.; Kapauan, P.A.

1977-01-01

Due to the toxicity of cyanide, its analysis in water is important. The use of ion-selective electrodes for its determination was studied. The known addition method using a silver sulfide membrane electrode was studied. This involved using a silver indicator solution to determine the cyanide content of a sample. Known amounts of a standard cyanide solution were added and the potentials noted. The results were plotted and the original concentration of cyanide extrapolated. The results of the experiment indicated the method to be practical for analysis of industrial waste waters, even in the presence of metal ions. The metal ions were masked using an EDTA solution while possible sulfides were precipitated out using a Pb (N0 3 ) 2 solution. The method was tested on four actual samples and the results indicated the applicability of the method

Estimation of process capability indices from the results of limit gauge inspection of dimensional parameters in machining industry

Science.gov (United States)

Masterenko, Dmitry A.; Metel, Alexander S.

2018-03-01

The process capability indices Cp, Cpk are widely used in the modern quality management as statistical measures of the ability of a process to produce output X within specification limits. The customer's requirement to ensure Cp ≥ 1.33 is often applied in contracts. Capability indices estimates may be calculated with the estimates of the mean µ and the variability 6σ, and for it, the quality characteristic in a sample of pieces should be measured. It requires, in turn, using advanced measuring devices and well-qualified staff. From the other hand, quality inspection by attributes, fulfilled with limit gauges (go/no-go) is much simpler and has a higher performance, but it does not give the numerical values of the quality characteristic. The described method allows estimating the mean and the variability of the process on the basis of the results of limit gauge inspection with certain lower limit LCL and upper limit UCL, which separates the pieces into three groups: where X control of the manufacturing process. It is very important for improving quality of articles in machining industry through their tolerance.

Evaluation of sustainability indicators for decision-making in mining companies

Directory of Open Access Journals (Sweden)

Miletić Slavica

2016-01-01

Full Text Available Evaluation of sustainability indicators in terms of their importance for decision making in mining companies (RTB Bor, RTB can significantly affect the steady economic growth and development of the country. In the paper are ranked sustainability indicators in terms of their importance by illustration of implementation of multicriteria decision making. The essence of the problem is to reduce the subjectivity in the mining companies (RTB Bor who are carriers of the economic development of the country. Evaluation of sustainability indicators of mining companies was carried out using the PROMETHEE methods for multi-criteria decision making. In this method the determination of criteria weights for ranking is done firstly, then the assessment of sustainability indicators and their complete ranking is performed. Based on the obtained results by PROMETHEE method, it is determined the most important sustainability indicators for decision-making, and that is an alternative A1 (economic indicators. The most influential criteria for a complete ranking of sustainability indicators is criteria C1 (increase the utilization of resources and C3 (environmental protection. The obtained result indicates to managers how the implementation of MCDM method should treat the indicators of sustainability during the planning and management process, all with aim to sustain mining companies (RTB Bor.

THE MAIN GENERAL HEALTH INDICATORS OF PRETERM NEWBORNS

OpenAIRE

Елена Николаевна Никулина; Светлана Ивановна Елгина; Юлия Александровна Липкова; Сергей Викторович Липков

2017-01-01

Objective – to determine the main health indicators in preterm newborns. Materials and Methods: Premature newborns and full-term newborns (160 and 1408, respectively) were investigated with clinical, instrumental, and statistical methods. Anthropometric parameters, somatic health, vulvar anatomy were considered to be the main criteria for general health. Results: The indicators of general health (physical development, somatic health, vulvar anatomy) in premature and full-term newborns...

Analysis of ESG indicators for measuring enterprise performance

Directory of Open Access Journals (Sweden)

Zuzana Chvátalová

2013-01-01

Full Text Available In this article authors focus on the analysis of the whole set of environmental, social and corporate governance (ESG indicators for the elimination of double or triple effects within the next construction of methods for measuring corporate performance. They build on their previously published results (in Acta univ. agric. et silvic. Mendel. Brun., 2012. The partial actual selected results of a recently undertaken currently project entitled ‘Construction of Methods for Multifactorial Assessment of Company Complex Performance in Selected Sectors’ were used. This project was solved the research teams of the Faculty of Business and Management of Brno University Technology and Faculty of Business and Economics of Mendel University in Brno since 2011. Further theoretical resources in the environmental, social and corporate governance area, known indicator databases (namely Global Reporting Initiative, comparative analysis, resp. syntheses for identifying possible of common indicator properties were identified to classify indicator subsets to preclude double or even triple effect based on mathematical set theory (Venn diagrams. The indicator analysis in constructed multi-factorial methods contributes to precise decision making in management to improve corporate performance.

Expanding indications for valve-sparing aortic root reconstruction: early and midterm results.

Science.gov (United States)

Valo, Johanna; Jokinen, Janne J; Kaarne, Markku; Ihlberg, Leo

2013-02-01

Valve-sparing aortic root reconstruction (VSRR) is an accepted method to treat patients with aortic root dilation. The role of the VSRR is less well defined for patients with bicuspid aortic valve, severe aortic valve insufficiency, congenital heart defects, and type A aortic dissection. We studied the clinical outcome of patients who underwent VSRR for expanded indications. Seventy-eight patients underwent VSRR between the 2005 and 2012. Seventy-two patients (92%) underwent reimplantation and 6 patients (8%) were operated on with the remodeling technique. The mean age was 51 ± 12 years (range 24 to 73). For 71 patients (91%), the operation was elective, and for 7 (9%; all with type A aortic dissection), on an emergency basis. Preoperatively, the degree of aortic insufficiency was graded as 2+ or greater for 27 patients (35%). Connective tissue disorder (Marfan or Loeys-Dietz), bicuspid aortic valve, or congenital heart disease was present in 15 (19%), 15 (19%), and 7 patients (9%), respectively. Concomitant aortic valve leaflet repair was performed for 39 patients (50%). The mean follow-up time was 2.4 ± 1.7 years (range, 0.1 to 7.0). Thirty-day mortality was zero. The rate of postoperative complications was low: stroke 3%, renal failure 3%, prosthesis infection 1%, and low cardiac output syndrome 1%. Survival was 100% at 1 year and 97% at 5 years. Freedom from recurrent aortic valve insufficiency (≥2+) during the follow-up was 94%. The midterm results of VSRR in terms of survival, freedom from recurrent aortic valve insufficiency, and the need for reoperation are excellent, even for high-risk patients. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Positive Result by Serology Indicates Active Helicobacter pylori Infection in Patients with Atrophic Gastritis

OpenAIRE

Kokkola, Arto; Rautelin, Hilpi; Puolakkainen, Pauli; Sipponen, Pentti; Färkkilä, Martti; Haapiainen, Reijo; Kosunen, Timo U.

1998-01-01

Patients with atrophic corpus gastritis and elevated Helicobacter pylori antibody titers but 13C-urea breath test (13C-UBT) and histology results negative for H. pylori were randomized into eradication therapy or follow-up only. Antibody levels decreased significantly in six out of seven patients in the eradication group, while in the follow-up group, the titers declined in only one out of eight patients. In patients with atrophic corpus gastritis, positive serology results may indicate an on...

On Rigorous Drought Assessment Using Daily Time Scale: Non-Stationary Frequency Analyses, Revisited Concepts, and a New Method to Yield Non-Parametric Indices

Directory of Open Access Journals (Sweden)

Charles Onyutha

2017-10-01

Full Text Available Some of the problems in drought assessments are that: analyses tend to focus on coarse temporal scales, many of the methods yield skewed indices, a few terminologies are ambiguously used, and analyses comprise an implicit assumption that the observations come from a stationary process. To solve these problems, this paper introduces non-stationary frequency analyses of quantiles. How to use non-parametric rescaling to obtain robust indices that are not (or minimally skewed is also introduced. To avoid ambiguity, some concepts on, e.g., incidence, extremity, etc., were revisited through shift from monthly to daily time scale. Demonstrations on the introduced methods were made using daily flow and precipitation insufficiency (precipitation minus potential evapotranspiration from the Blue Nile basin in Africa. Results show that, when a significant trend exists in extreme events, stationarity-based quantiles can be far different from those when non-stationarity is considered. The introduced non-parametric indices were found to closely agree with the well-known standardized precipitation evapotranspiration indices in many aspects but skewness. Apart from revisiting some concepts, the advantages of the use of fine instead of coarse time scales in drought assessment were given. The links for obtaining freely downloadable tools on how to implement the introduced methods were provided.

Framework and indicator testing protocol for developing and piloting quality indicators for the UK quality and outcomes framework

Directory of Open Access Journals (Sweden)

Burke Martyn

2011-08-01

Full Text Available Abstract Background Quality measures should be subjected to a testing protocol before being used in practice using key attributes such as acceptability, feasibility and reliability, as well as identifying issues derived from actual implementation and unintended consequences. We describe the methodologies and results of an indicator testing protocol (ITP using data from proposed quality indicators for the United Kingdom Quality and Outcomes Framework (QOF. Methods The indicator testing protocol involved a multi-step and methodological process: 1 The RAND/UCLA Appropriateness Method, to test clarity and necessity, 2 data extraction from patients' medical records, to test technical feasibility and reliability, 3 diaries, to test workload, 4 cost-effectiveness modelling, and 5 semi-structured interviews, to test acceptability, implementation issues and unintended consequences. Testing was conducted in a sample of representative family practices in England. These methods were combined into an overall recommendation for each tested indicator. Results Using an indicator testing protocol as part of piloting was seen as a valuable way of testing potential indicators in 'real world' settings. Pilot 1 (October 2009-March 2010 involved thirteen indicators across six clinical domains and twelve indicators passed the indicator testing protocol. However, the indicator testing protocol identified a number of implementation issues and unintended consequences that can be rectified or removed prior to national roll out. A palliative care indicator is used as an exemplar of the value of piloting using a multiple attribute indicator testing protocol - while technically feasible and reliable, it was unacceptable to practice staff and raised concerns about potentially causing actual patient harm. Conclusions This indicator testing protocol is one example of a protocol that may be useful in assessing potential quality indicators when adapted to specific country health

Methods of Estimation the Reliability and Increasing the Informativeness of the Laboratory Results (Analysis of the Laboratory Case of Measurement the Indicators of Thyroid Function

Directory of Open Access Journals (Sweden)

N A Kovyazina

2014-06-01

Full Text Available The goal of the study was to demonstrate the multilevel laboratory quality management system and point at the methods of estimating the reliability and increasing the amount of information content of the laboratory results (on the example of the laboratory case. Results. The article examines the stages of laboratory quality management which has helped to estimate the reliability of the results of determining Free T3, Free T4 and TSH. The measurement results are presented by the expanded uncertainty and the evaluation of the dynamics. Conclusion. Compliance with mandatory measures for laboratory quality management system enables laboratories to obtain reliable results and calculate the parameters that are able to increase the amount of information content of laboratory tests in clinical decision making.

Indicators of corporate financial success: Similar studies in South Africa and the USA, different results

Directory of Open Access Journals (Sweden)

JHvH de Wet

2011-12-01

Full Text Available Purpose: The aim of this study was to test whether findings by Johnson and Soenen (2003 regarding indicators of successful companies in the USA also apply to South African JSE-listed companies. Problem investigated: To date, no South African study has tried to determine the indicators of the financial success of local companies specifically along the lines of Johnson and Soenen's (2003 study. Determining whether the indicators found to be most highly significant in the US study also apply in South Africa would constitute valuable information in the South African context. Approach: The study tested the significance of the linear relationships between possible indicators of financial success and three measures of financial success for South African companies and compared them to the results of the US study. Findings: The findings revealed that the relationships are far less significant for South African companies. Value of research: The study highlighted the fact that indicators of financial success for US companies are not necessarily contributors to the success of South African listed companies and that models developed in different environments should therefore be used with caution when applied in South Africa. Conclusion: Further studies need to be undertaken in order to identify the most significant South African indicators of corporate financial success.

Carbon Impact Analytics - Designing low carbon indices based on Carbon Impact Analytics indicators

International Nuclear Information System (INIS)

2016-01-01

Investors are increasingly exposed to carbon risks and now face the challenge of managing these risks and developing climate-resilient investment strategies. Carbon Impact Analytics (CIA), an innovative methodology for analyzing the full carbon impact of a portfolio or index, equips investors and asset managers with the tools necessary to reduce their climate-related risks but also to seize the opportunities offered by the ongoing energy transition. Investors, asset managers and other financial institutions may use CIA results to: - measure and manage risks, - optimize their contribution to the energy transition, - seize opportunities associated with climate change mitigation, - report on GHG emissions and savings (for regulatory purposes or voluntarily), - engage in dialogue with companies, - reallocate investment portfolios, - and build new low-carbon indices. In this report, Carbone 4 offers a detailed look into how CIA indicators can be used to either 1) reallocate an existing portfolio or index to achieve maximal carbon performance or 2) build new low carbon indices from the ground up, drawn from Carbone 4's ever-growing database of CIA-analyzed firms. Two main levers were used to optimize CIA output: 1. Sectorial reallocation: exclusion of fossil fuel-related sectors or insertion of low carbon pure players; 2. Intra-sectorial reallocation: best-in-class approach within a sector. Sectorial and intra-sectorial methods may be applied in conjunction with one another to maximize results. For example, a best-in-class + fossil fuel-free index may be constructed by first excluding the fossil fuel sector and then applying a CIA best-in-class approach to all remaining sectors. This report offers a detailed look into how CIA indicators can be used to rework portfolios or indices to maximize carbon performance or to build low carbon indices from the ground up. These methods are illustrated via two preliminary examples of indices designed by Carbone 4: the reallocated

Percentile-Based ETCCDI Temperature Extremes Indices for CMIP5 Model Output: New Results through Semiparametric Quantile Regression Approach

Science.gov (United States)

Li, L.; Yang, C.

2017-12-01

Climate extremes often manifest as rare events in terms of surface air temperature and precipitation with an annual reoccurrence period. In order to represent the manifold characteristics of climate extremes for monitoring and analysis, the Expert Team on Climate Change Detection and Indices (ETCCDI) had worked out a set of 27 core indices based on daily temperature and precipitation data, describing extreme weather and climate events on an annual basis. The CLIMDEX project (http://www.climdex.org) had produced public domain datasets of such indices for data from a variety of sources, including output from global climate models (GCM) participating in the Coupled Model Intercomparison Project Phase 5 (CMIP5). Among the 27 ETCCDI indices, there are six percentile-based temperature extremes indices that may fall into two groups: exceedance rates (ER) (TN10p, TN90p, TX10p and TX90p) and durations (CSDI and WSDI). Percentiles must be estimated prior to the calculation of the indices, and could more or less be biased by the adopted algorithm. Such biases will in turn be propagated to the final results of indices. The CLIMDEX used an empirical quantile estimator combined with a bootstrap resampling procedure to reduce the inhomogeneity in the annual series of the ER indices. However, there are still some problems remained in the CLIMDEX datasets, namely the overestimated climate variability due to unaccounted autocorrelation in the daily temperature data, seasonally varying biases and inconsistency between algorithms applied to the ER indices and to the duration indices. We now present new results of the six indices through a semiparametric quantile regression approach for the CMIP5 model output. By using the base-period data as a whole and taking seasonality and autocorrelation into account, this approach successfully addressed the aforementioned issues and came out with consistent results. The new datasets cover the historical and three projected (RCP2.6, RCP4.5 and RCP

Evaluation of various approaches for assessing dose indicators and patient organ doses resulting from radiotherapy cone-beam CT

International Nuclear Information System (INIS)

Rampado, Osvaldo; Giglioli, Francesca Romana; Rossetti, Veronica; Ropolo, Roberto; Fiandra, Christian; Ragona, Riccardo

2016-01-01

Purpose: The aim of this study was to evaluate various approaches for assessing patient organ doses resulting from radiotherapy cone-beam CT (CBCT), by the use of thermoluminescent dosimeter (TLD) measurements in anthropomorphic phantoms, a Monte Carlo based dose calculation software, and different dose indicators as presently defined. Methods: Dose evaluations were performed on a CBCT Elekta XVI (Elekta, Crawley, UK) for different protocols and anatomical regions. The first part of the study focuses on using PCXMC software (PCXMC 2.0, STUK, Helsinki, Finland) for calculating organ doses, adapting the input parameters to simulate the exposure geometry, and beam dose distribution in an appropriate way. The calculated doses were compared to readouts of TLDs placed in an anthropomorphic Rando phantom. After this validation, the software was used for analyzing organ dose variability associated with patients’ differences in size and gender. At the same time, various dose indicators were evaluated: kerma area product (KAP), cumulative air-kerma at the isocenter (K_a_i_r), cone-beam dose index, and central cumulative dose. The latter was evaluated in a single phantom and in a stack of three adjacent computed tomography dose index phantoms. Based on the different dose indicators, a set of coefficients was calculated to estimate organ doses for a range of patient morphologies, using their equivalent diameters. Results: Maximum organ doses were about 1 mGy for head and neck and 25 mGy for chest and pelvis protocols. The differences between PCXMC and TLDs doses were generally below 10% for organs within the field of view and approximately 15% for organs at the boundaries of the radiation beam. When considering patient size and gender variability, differences in organ doses up to 40% were observed especially in the pelvic region; for the organs in the thorax, the maximum differences ranged between 20% and 30%. Phantom dose indexes provided better correlation with organ doses

Stability indicating HPLC-UV method for detection of curcumin in Curcuma longa extract and emulsion formulation.

Science.gov (United States)

Syed, Haroon Khalid; Liew, Kai Bin; Loh, Gabriel Onn Kit; Peh, Kok Khiang

2015-03-01

A stability-indicating HPLC-UV method for the determination of curcumin in Curcuma longa extract and emulsion was developed. The system suitability parameters, theoretical plates (N), tailing factor (T), capacity factor (K'), height equivalent of a theoretical plate (H) and resolution (Rs) were calculated. Stress degradation studies (acid, base, oxidation, heat and UV light) of curcumin were performed in emulsion. It was found that N>6500, Tcurcumin were ⩽0.87% and ⩽2.0%, while the inter-day precision and accuracy values were ⩽2.1% and ⩽-1.92. Curcumin degraded in emulsion under acid, alkali and UV light. In conclusion, the stability-indicating method could be employed to determine curcumin in bulk and emulsions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Predictive value of clinical risk indicators in child development: final results of a study based on psychoanalytic theory

Directory of Open Access Journals (Sweden)

Maria Cristina Machado Kupfer

2010-03-01

Full Text Available We present the final results of a study using the IRDI (Clinical Risk Indicators in Child Development. Based on a psychoanalytic approach, 31 risk signs for child development were constructed and applied to 726 children between the ages of 0 and 18 months. One sub-sample was evaluated at the age of three. The results showed a predictive capacity of IRDIs to indicate developmental problems; 15 indicators for the IRDI were also highlighted that predict psychic risk for the constitution of the subject.

Food processing methods influence the glycaemic indices of some commonly eaten West Indian carbohydrate-rich foods.

Science.gov (United States)

Bahado-Singh, P S; Wheatley, A O; Ahmad, M H; Morrison, E Y St A; Asemota, H N

2006-09-01

Glycaemic index (GI) values for fourteen commonly eaten carbohydrate-rich foods processed by various methods were determined using ten healthy subjects. The foods studied were round leaf yellow yam (Dioscorea cayenensis), negro and lucea yams (Dioscorea rotundata), white and sweet yams (Dioscorea alata), sweet potato (Solanum tuberosum), Irish potato (Ipomoea batatas), coco yam (Xanthosoma spp.), dasheen (Colocasia esculenta), pumpkin (Cucurbita moschata), breadfruit (Artocarpus altilis), green banana (Musa sapientum), and green and ripe plantain (Musa paradisiaca). The foods were processed by boiling, frying, baking and roasting where applicable. Pure glucose was used as the standard with a GI value of 100. The results revealed marked differences in GI among the different foods studied ranging from 35 (se 3) to 94 (se 8). The area under the glucose response curve and GI value of some of the roasted and baked foods were significantly higher than foods boiled or fried (P<0.05). The results indicate that foods processed by roasting or baking may result in higher GI. Conversely, boiling of foods may contribute to a lower GI diet.

Effect of different cooking methods on minerals, vitamins and nutritional quality indices of kutum roach (Rutilus frisii kutum).

Science.gov (United States)

Hosseini, Hedayat; Mahmoudzadeh, Maryam; Rezaei, Masoud; Mahmoudzadeh, Leila; Khaksar, Ramin; Khosroshahi, Nader Karimian; Babakhani, Aria

2014-04-01

In this study, the influence of four cooking methods (baking, boiling, microwaving and frying) was evaluated on the nutritional value of kutum roach. Proximate, fatty acid composition, vitamin and mineral contents and also nutritional quality indices (NQI) of kutum roach were investigated before and after cooking treatment. All treated samples showed increase in protein, ash and lipid contents and decrease in the content of total omega-3 fatty acids (n-3) in comparison to raw fish fillets (control group). Cooking methods had no significant effect on omega-6 fatty acids (n-6) except for frying that increased it. Nonetheless, all of the cooking methods reduced vitamin B1, A and D contents. Boiling significantly decreased mineral contents including Na, K, P and Zn. Considering the overall nutritional quality indices, vitamin and mineral contents, baking is the best cooking method among other applied methods. Copyright © 2013 Elsevier Ltd. All rights reserved.

Key Performance Indicators: From Promise to Payoff. The Productivity for Results Series No. 2

Science.gov (United States)

Casserly, Michael; Eugene, Michael

2014-01-01

This paper draws upon the expertise of two leading educators, Michael Casserly, director of the Council of the Great City Schools, and Michael Eugene, chief operating officer of the Orange County Public Schools in Florida. They outline a set of key performance indicators that some urban districts use to benchmark the results of their operating…

The estimation of the measurement results with using statistical methods

International Nuclear Information System (INIS)

Ukrmetrteststandard, 4, Metrologichna Str., 03680, Kyiv (Ukraine))" data-affiliation=" (State Enterprise Ukrmetrteststandard, 4, Metrologichna Str., 03680, Kyiv (Ukraine))" >Velychko, O; UkrNDIspirtbioprod, 3, Babushkina Lane, 03190, Kyiv (Ukraine))" data-affiliation=" (State Scientific Institution UkrNDIspirtbioprod, 3, Babushkina Lane, 03190, Kyiv (Ukraine))" >Gordiyenko, T

2015-01-01

The row of international standards and guides describe various statistical methods that apply for a management, control and improvement of processes with the purpose of realization of analysis of the technical measurement results. The analysis of international standards and guides on statistical methods estimation of the measurement results recommendations for those applications in laboratories is described. For realization of analysis of standards and guides the cause-and-effect Ishikawa diagrams concerting to application of statistical methods for estimation of the measurement results are constructed

The estimation of the measurement results with using statistical methods

Science.gov (United States)

Velychko, O.; Gordiyenko, T.

2015-02-01

The row of international standards and guides describe various statistical methods that apply for a management, control and improvement of processes with the purpose of realization of analysis of the technical measurement results. The analysis of international standards and guides on statistical methods estimation of the measurement results recommendations for those applications in laboratories is described. For realization of analysis of standards and guides the cause-and-effect Ishikawa diagrams concerting to application of statistical methods for estimation of the measurement results are constructed.

Hair as a bio-indicator: limitations and complications in the interpretation of results

International Nuclear Information System (INIS)

Evans, G.J.; Jervis, R.E.

1987-01-01

Some of the limitations and complications associated with hair and nail analysis are discussed. Data obtained from an occupational study demonstrated the potential for misinterpreting hair or nail analysis data either through describing results averaged over a group by arithmetic instead of geometric means or through not accounting for the age range of subjects in groups to be compared. Examples that arose from the study indicated that differences between hair from the same subjects grown at different times can both complicate and assist in interpreting hair analysis results. In an investigation into the addition and removal of metallic powders, it was found that both hair and nail can directly incorporate elements through contact with dust. (author)

Cross-sectional prospective survey to study indication-based usage of antimicrobials in animals: Results of use in cattle

Directory of Open Access Journals (Sweden)

Pyörälä Satu

2008-04-01

Full Text Available Abstract Background Indication-based data on the use of antimicrobials in animals were collected using a prospective cross-sectional survey, similarly as for surveys carried out in human medicine, but adapting the questionnaire to include veterinary-specific issues. The participating veterinarians were randomly selected from a sample population of practising veterinarians. The sampling was stratified to take into account the proportions of different types of veterinary practice in the country. All patients consulting the veterinary practice during a 1-week period were included in the study and veterinarians returned a completed questionnaire for each patient receiving antimicrobial treatment. As cattle received most of the treatments, results from the survey are given using cattle as an example species. Results The survey was sent to 681 veterinarians, of whom 262 (39% responded. In total 2850 questionnaires were completed. The largest quantities of antimicrobials, measured in kilograms, were used for cattle, followed by pigs, dogs and horses. The species that were treated most were cattle (n = 1308, dogs (n = 989 and cats (n = 311. For cattle, the most common reason for treatment was acute mastitis (52%, followed by dry-cow therapy (21%, subclinical mastitis (6% and treatment for acute enteritis (4%. The remaining treatments covered 17% of cattle patients and 15 different indications. For acute mastitis, parenteral or intramammary treatment was used in 36% and 34% of the cases, respectively. The remaining 30% received both treatments simultaneously. Of the parenteral treatments (n = 459, benzyl penicillin was used in 83% of the treated animals (n = 379, while fluoroquinolones were used in 49 cases (11%. Of the 433 cows receiving intramammary treatment, ampicillin combined with cloxacillin was most commonly used (n = 157; 36%, followed by cephalexin+streptomycin (n = 113; 26%. Conclusion This cross-sectional prospective survey provided a useful

Do clinical safety charts improve paramedic key performance indicator results? (A clinical improvement programme evaluation).

Science.gov (United States)

Ebbs, Phillip; Middleton, Paul M; Bonner, Ann; Loudfoot, Allan; Elliott, Peter

2012-07-01

Is the Clinical Safety Chart clinical improvement programme (CIP) effective at improving paramedic key performance indicator (KPI) results within the Ambulance Service of New South Wales? The CIP intervention area was compared with the non-intervention area in order to determine whether there was a statistically significant improvement in KPI results. The CIP was associated with a statistically significant improvement in paramedic KPI results within the intervention area. The strategies used within this CIP are recommended for further consideration.

Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study

Directory of Open Access Journals (Sweden)

Mansilla Rosa

2011-07-01

Full Text Available Abstract Background The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. Methods A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases: 1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. Results The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary

Non-Destructive Evaluation Method Based On Dynamic Invariant Stress Resultants

Directory of Open Access Journals (Sweden)

Zhang Junchi

2015-01-01

Full Text Available Most of the vibration based damage detection methods are based on changes in frequencies, mode shapes, mode shape curvature, and flexibilities. These methods are limited and typically can only detect the presence and location of damage. Current methods seldom can identify the exact severity of damage to structures. This paper will present research in the development of a new non-destructive evaluation method to identify the existence, location, and severity of damage for structural systems. The method utilizes the concept of invariant stress resultants (ISR. The basic concept of ISR is that at any given cross section the resultant internal force distribution in a structural member is not affected by the inflicted damage. The method utilizes dynamic analysis of the structure to simulate direct measurements of acceleration, velocity and displacement simultaneously. The proposed dynamic ISR method is developed and utilized to detect the damage of corresponding changes in mass, damping and stiffness. The objectives of this research are to develop the basic theory of the dynamic ISR method, apply it to the specific types of structures, and verify the accuracy of the developed theory. Numerical results that demonstrate the application of the method will reflect the advanced sensitivity and accuracy in characterizing multiple damage locations.

Comparison of multiple-criteria decision-making methods - results of simulation study

Directory of Open Access Journals (Sweden)

Michał Adamczak

2016-12-01

Full Text Available Background: Today, both researchers and practitioners have many methods for supporting the decision-making process. Due to the conditions in which supply chains function, the most interesting are multi-criteria methods. The use of sophisticated methods for supporting decisions requires the parameterization and execution of calculations that are often complex. So is it efficient to use sophisticated methods? Methods: The authors of the publication compared two popular multi-criteria decision-making methods: the  Weighted Sum Model (WSM and the Analytic Hierarchy Process (AHP. A simulation study reflects these two decision-making methods. Input data for this study was a set of criteria weights and the value of each in terms of each criterion. Results: The iGrafx Process for Six Sigma simulation software recreated how both multiple-criteria decision-making methods (WSM and AHP function. The result of the simulation was a numerical value defining the preference of each of the alternatives according to the WSM and AHP methods. The alternative producing a result of higher numerical value  was considered preferred, according to the selected method. In the analysis of the results, the relationship between the values of the parameters and the difference in the results presented by both methods was investigated. Statistical methods, including hypothesis testing, were used for this purpose. Conclusions: The simulation study findings prove that the results obtained with the use of two multiple-criteria decision-making methods are very similar. Differences occurred more frequently in lower-value parameters from the "value of each alternative" group and higher-value parameters from the "weight of criteria" group.

Development and validation of a system of assimilation indices: A mixed method approach to understand change in psychotherapy.

Science.gov (United States)

Neto, David D; Baptista, Telmo M; Dent-Brown, Kim

2015-06-01

Assimilation is an important process in understanding change in psychotherapy. Similar to other psychological processes, assimilation may be traceable in the speech of clients by attending to its signs or indices. In the present research, we aimed to build a system of indices of assimilation. This research follows a mixed method design. The indices were derived through qualitative analysis, using grounded theory. Subsequently, the indices were adjusted quantitatively and applied to 30 single psychotherapy sessions of adult clients with depression and 11 therapists. Forty-two indices were found and grouped into the following five process categories of assimilation: external distress, pain, noticing, decentring and action. The indices showed good inter-rater reliability and internal consistency. Except for noticing, all process categories correlated significantly with each other according to conceptual proximity. The system of indices also showed convergent validity with an existing coding system of assimilation for two process categories. The results suggest that the system of indices is a useful approach for understanding assimilation. The consideration of assimilation in a continuous fashion through sub-processes may help to extend our knowledge of this process and provide a tool for clinical practice. Assimilation is an important process in understanding change in psychotherapy in the sense that it takes into account insight and action-related processes. Clients convey in their speech signs or indices of the assimilation process which can be observed both in the style and content of their utterances. Using these indices, therapists can continuously assess assimilation and use this information in choosing interventions. Limitations: This study follows a cross-sectional design and does not allow consideration of the predictive value of the indices. The outcome of the therapy was not taken into account, which restricts validity considerations to the comparison with

Could Daylight Glare Be Defined Mathematically?Results of Testing the DGIN Method in Japan

Science.gov (United States)

Nazzal, Ali; Oki, Masato

Discomfort glare from daylight is a common problem without valid prediction methods so far. A new mathematical DGIN (New Daylight Glare Index) method tries to respond the challenge. This paper reports on experiments carried out in daylit office environment in Japan to test applicability of the method. Slight positive correlation was found between the DGIN and the subjective evaluation. Additionally, a high Ladaptation value together with the small ratio of Lwindow to Ladaptation was obviously experienced sufficient to neutralize the effect of glare discomfort. However, subjective assessments are poor glare indicators and not reliable in testing glare prediction methods. DGIN is a good indicator of daylight glare, and when the DGIN value is analyzed together with the measured illuminance ratios, discomfort glare from daylight can be analyzed in a quantitative manner. The DGIN method could serve architects and lighting designers in testing daylighting systems, and also guide the action of daylight responsive lighting controls.

Lung Transplantation for Cystic Fibrosis: Results, Indications, Complications, and Controversies

Science.gov (United States)

Lynch, Joseph P.; Sayah, David M.; Belperio, John A.; Weigt, S. Sam

2016-01-01

Survival in patients with cystic fibrosis (CF) has improved dramatically over the past 30 to 40 years, with mean survival now approximately 40 years. Nonetheless, progressive respiratory insufficiency remains the major cause of mortality in CF patients, and lung transplantation (LT) is eventually required. Timing of listing for LT is critical, because up to 25 to 41% of CF patients have died while awaiting LT. Globally, approximately 16.4% of lung transplants are performed in adults with CF. Survival rates for LT recipients with CF are superior to other indications, yet LT is associated with substantial morbidity and mortality (~50% at 5-year survival rates). Myriad complications of LT include allograft failure (acute or chronic), opportunistic infections, and complications of chronic immunosuppressive medications (including malignancy). Determining which patients are candidates for LT is difficult, and survival benefit remains uncertain. In this review, we discuss when LT should be considered, criteria for identifying candidates, contraindications to LT, results post-LT, and specific complications that may be associated with LT. Infectious complications that may complicate CF (particularly Burkholderia cepacia spp., opportunistic fungi, and nontuberculous mycobacteria) are discussed. PMID:25826595

THE YOUNG SOLAR ANALOGS PROJECT. I. SPECTROSCOPIC AND PHOTOMETRIC METHODS AND MULTI-YEAR TIMESCALE SPECTROSCOPIC RESULTS

Energy Technology Data Exchange (ETDEWEB)

Gray, R. O.; Briley, M. M.; Lambert, R. A.; Fuller, V. A.; Newsome, I. M.; Seeds, M. F. [Department of Physics and Astronomy, Appalachian State University, Boone, NC 26808 (United States); Saken, J. M.; Kahvaz, Y. [Department of Physics and Physical Science, Marshall University, Huntington, WV 25755 (United States); Corbally, C. J. [Vatican Observatory Research Group, Steward Observatory, Tucson, AZ 85721-0065 (United States)

2015-12-15

This is the first in a series of papers presenting methods and results from the Young Solar Analogs Project, which began in 2007. This project monitors both spectroscopically and photometrically a set of 31 young (300–1500 Myr) solar-type stars with the goal of gaining insight into the space environment of the Earth during the period when life first appeared. From our spectroscopic observations we derive the Mount Wilson S chromospheric activity index (S{sub MW}), and describe the method we use to transform our instrumental indices to S{sub MW} without the need for a color term. We introduce three photospheric indices based on strong absorption features in the blue-violet spectrum—the G-band, the Ca i resonance line, and the Hydrogen-γ line—with the expectation that these indices might prove to be useful in detecting variations in the surface temperatures of active solar-type stars. We also describe our photometric program, and in particular our “Superstar technique” for differential photometry which, instead of relying on a handful of comparison stars, uses the photon flux in the entire star field in the CCD image to derive the program star magnitude. This enables photometric errors on the order of 0.005–0.007 magnitude. We present time series plots of our spectroscopic data for all four indices, and carry out extensive statistical tests on those time series demonstrating the reality of variations on timescales of years in all four indices. We also statistically test for and discover correlations and anti-correlations between the four indices. We discuss the physical basis of those correlations. As it turns out, the “photospheric” indices appear to be most strongly affected by emission in the Paschen continuum. We thus anticipate that these indices may prove to be useful proxies for monitoring emission in the ultraviolet Balmer continuum. Future papers in this series will discuss variability of the program stars on medium (days–months) and short

[Tracheobronchial stents: a retrospective analysis of indications, results and in particular complications].

Science.gov (United States)

Tonn, H; Mall, W; Schneider, K-D; Schönhofer, B

2008-10-01

Tracheobronchial stents are inserted mainly in cases of malignant and benign airway stenosis. Further indications are esophago-tracheal fistulas, mediastinal fistulas and tracheomalacia. A retrospective analysis was conducted on patients' records, information provided by the general practitioners and relatives of the patients from July 1993 to December 2006 in the Department of Pneumology of the Heidehaus Hospital Hannover (since 6/05 Department of Pneumology and Internal Intensive Care Medicine, Oststadt-Heidehaus Hospital). During the observation period of 13 years a total of 269 stents (177 permanent, 92 temporary) were implanted in 207 patients (1.3 stents per patient). The vast majority of patients (173/207) suffered from an underlying malignancy. About half of the stents were deployed in the trachea. The median length of placement was 116 days in patients with malignancies and 313 days in patients with benign diseases. In about 40 % of the patients notable complications were observed which were directly or indirectly associated with the stents. These findings show the importance of a critical indication for stent implantation. In benign diseases a stent can remain for years inside the tracheobronchial system, if it is well tolerated in the beginning. In malignant diseases the result depends decisively on the stage of the tumour: has the stent been implanted before any other tumour therapy is started or is it an end-stage tumor with no other therapeutic option? In general, complications of stents occur quite frequently. The analysis of stent data leads to some aspects for the prevention of stent-related complications. There should be a strict indication and appropriate choice of stent material. Nevertheless, there remains an ethical dilemma in patients with end-stage disease as to whether to implant a stent or to do nothing against the tumor, because the benefit immediately after stent insertion vanishes with progression of the tumour, so causing extra

[Research advances in indices and methods for nutritional status evaluation in patients with liver cirrhosis].

Science.gov (United States)

Li, H; Zhang, L

2017-03-20

In recent years, malnutrition in patients with liver cirrhosis has been taken more and more seriously in clinical physicians, and patients' nutritional status is closely associated with prognosis. At present, there are many methods for the evaluation of nutritional status in patients with liver cirrhosis, but there are still no unified standards. This article reviews the common evaluation indices and methods used in clinical practice in China and foreign countries, in order to provide a basis for accurately evaluating nutritional status and guiding nutritional therapy in patients with liver cirrhosis.

Quality indicators in radiotherapy

International Nuclear Information System (INIS)

Cionini, Luca; Gardani, Gianstefano; Gabriele, Pietro; Magri, Secondo; Morosini, Pier Luigi; Rosi, Antonella; Viti, Vincenza

2007-01-01

Background and purpose: There is a widespread and increasing tendency to develop hospital performance indicators in the field of accreditation/certification systems and quality benchmarking. A study has been undertaken to develop a set of performance indicators for a typical radiotherapy Centre and to evaluate their ability to provide a continuous quality improvement. Materials and methods: A working group consisting of radiation oncologists, medical physicists and radiation technologists under the coordination of experts in health technology assessment has elaborated a set of general indicators able to monitor performances and the quality level of a typical radiotherapy Centre. The work has been carried out through four steps: a preliminary set of indicators was selected; data on these indicators were collected in a number of Italian radiotherapy Centres and medical physics Services; problems in collection and analysis of data were discussed; a final set of indicators was developed. Results: A final set of 13 indicators is here presented. They concern general structural and/or operational features, health physics activities and accuracy and technical complexity of the treatment. Conclusions: The indicators tested in a few Italian Centres of radiotherapy and medical physics Services are now ready to be utilized by a larger community

Indicators and their functions

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Joumard, Robert; Aschemann, Ralf

2010-01-01

indicators? How can several indicators be jointly considered? And how can indicators be used in planning and decision making? Firstly we provide definition of 'indicator of environmental sustainability in transport'. The functions, strengths and weaknesses of indicators as measurement tools, and as decision...... for indicators and assessments. As the decision making context influences the perceived and actual needs for indicators and methods, we also analysed the dimensions and context of decision making. We derived criteria and methods for the assessment and selection of indicators of environmental sustainability......This report is the final report of the action COST 356 'EST - Towards the definition of a measurable environmentally sustainable transport'. It tries to answer the following questions: How can environmental impacts of transport be measured? How can measurements be transformed into operational...

Epiphyseal maturity indicators at the knee and their relationship to chronological age: results of an Irish population study.

LENUS (Irish Health Repository)

O'Connor, Jean E

2013-09-01

Skeletal maturation is divisible to three main components; the time of appearance of an ossification center, its change in morphology and time of fusion to a primary ossification center. With regard to the knee, the intermediate period between appearance and fusion of the ossification centers extends over a period of greater than 10 years. This study aims to investigate radiographically the age at which morphological changes of the epiphyses at the knee occur in a modern Irish population. Radiographs of 221 subjects (137 males; 84 females) aged 9-19 years were examined. Seven nonmetric indicators of maturity were assessed using criteria modified from the Roche, Wainer, and Thissen method and Pyle and Hoerr\\'s atlas of the knee. Reference charts are presented which display the timeline for each of the grades of development of the seven indicators. Mean age was found to increase significantly with successive grades of development of each of the seven indicators. A significant difference was noted between males and females at the same grade of development for six of the seven indicators. The narrowest age range reported for a single grade of development was 2.2 years for Grade 2 of development of the tibial tuberosity for males. The information on changing morphology of the epiphyses at the knee in the present study may provide an adjunct to methods used for evaluation of skeletal maturity before surgery for orthopedic disorders or to evaluate skeletal age in clinical scenarios where either delayed or precocious skeletal maturation is suspected.

Vulnerability curves vs. vulnerability indicators: application of an indicator-based methodology for debris-flow hazards

Science.gov (United States)

Papathoma-Köhle, Maria

2016-08-01

The assessment of the physical vulnerability of elements at risk as part of the risk analysis is an essential aspect for the development of strategies and structural measures for risk reduction. Understanding, analysing and, if possible, quantifying physical vulnerability is a prerequisite for designing strategies and adopting tools for its reduction. The most common methods for assessing physical vulnerability are vulnerability matrices, vulnerability curves and vulnerability indicators; however, in most of the cases, these methods are used in a conflicting way rather than in combination. The article focuses on two of these methods: vulnerability curves and vulnerability indicators. Vulnerability curves express physical vulnerability as a function of the intensity of the process and the degree of loss, considering, in individual cases only, some structural characteristics of the affected buildings. However, a considerable amount of studies argue that vulnerability assessment should focus on the identification of these variables that influence the vulnerability of an element at risk (vulnerability indicators). In this study, an indicator-based methodology (IBM) for mountain hazards including debris flow (Kappes et al., 2012) is applied to a case study for debris flows in South Tyrol, where in the past a vulnerability curve has been developed. The relatively "new" indicator-based method is being scrutinised and recommendations for its improvement are outlined. The comparison of the two methodological approaches and their results is challenging since both methodological approaches deal with vulnerability in a different way. However, it is still possible to highlight their weaknesses and strengths, show clearly that both methodologies are necessary for the assessment of physical vulnerability and provide a preliminary "holistic methodological framework" for physical vulnerability assessment showing how the two approaches may be used in combination in the future.

Waste indicators

Energy Technology Data Exchange (ETDEWEB)

Dall, O.; Lassen, C.; Hansen, E. [Cowi A/S, Lyngby (Denmark)

2003-07-01

The Waste Indicator Project focuses on methods to evaluate the efficiency of waste management. The project proposes the use of three indicators for resource consumption, primary energy and landfill requirements, based on the life-cycle principles applied in the EDIP Project. Trial runs are made With the indicators on paper, glass packaging and aluminium, and two models are identified for mapping the Danish waste management, of which the least extensive focuses on real and potential savings. (au)

Waste indicators

International Nuclear Information System (INIS)

Dall, O.; Lassen, C.; Hansen, E.

2003-01-01

The Waste Indicator Project focuses on methods to evaluate the efficiency of waste management. The project proposes the use of three indicators for resource consumption, primary energy and landfill requirements, based on the life-cycle principles applied in the EDIP Project. Trial runs are made With the indicators on paper, glass packaging and aluminium, and two models are identified for mapping the Danish waste management, of which the least extensive focuses on real and potential savings. (au)

Performance indicators for power reactors

International Nuclear Information System (INIS)

Gillies, C.; White, M.

1995-11-01

A review of Canadian and worldwide performance indicator definitions and data was performed to identify a set of indicators that could be used for comparison of performance among nuclear power plants. The results of this review are to be used as input to an AECB team developing a consistent set of performance indicators for measuring Canadian power reactor safety performance. To support the identification of performance indicators, a set of criteria was developed to assess the effectiveness of each indicator for meaningful comparison of performance information. The project identified a recommended set of performance indicators that could be used by AECB staff to compare the performance of Canadian nuclear power plants among themselves, and with international performance. The basis for selection of the recommended set and exclusion of others is provided. This report provides definitions and calculation methods for each recommended performance indicator. In addition, a spreadsheet has been developed for comparison and trending for the recommended set of indicators. Example trend graphs are included to demonstrate the use of the spreadsheet. (author). 50 refs., 11 tabs., 3 figs

A rapid and specific titrimetric method for the precise determination of plutonium using redox indicator

International Nuclear Information System (INIS)

Chitnis, R.T.; Dubey, S.C.

1976-01-01

A simple and rapid method for the determination of plutonium in plutonium nitrate solution and its application to the purex process solutions is discussed. The method involves the oxidation of plutonium to Pu(VI) with the help of argentic oxide followed by the destruction of the excess argentic oxide by means of sulphamic acid. The determination of plutonium is completed by adding ferrous ammonium sulphate solution which reduces Pu(VI) to Pu(IV) and titrating the excess ferrous with standard potassium dichromate solution using sodium diphenylamine sulphonate as the internal indicator. The effect of the various reagents add during the oxidation and reduction of plutonium, on the final titration has been investigated. The method works satisfactorily for the analysis of plutonium in the range of 0.5 to 5 mg. The precision of the method is found to be within 0.1%. (author)

Results of the determination of He in cenozoic aquifers using the GC method.

Science.gov (United States)

Kotowski, Tomasz; Najman, Joanna

2015-04-01

Applications of the Helium (He) method known so far consisted mainly of 4He measurements using a special mass spectrometer. 4He measurements for groundwater dating purposes can be replaced by total He (3He+4He) concentration measurements because the content of 3He can be ignored. The concentrations of 3He are very low and 3He/4 He ratios do not exceed 1.0·10(-5) in most cases. In this study, the total He concentrations in groundwater were determined using the gas chromatographic (GC) method as an alternative to methods based on spectrometry measurement. He concentrations in groundwater were used for the determination of residence time and groundwater circulation. Additionally, the radiocarbon method was used to determine the value of the external He flux (JHe) in the study area. Obtained low He concentrations and their small variation within the ca. 65 km long section along which groundwater flows indicate that it is likely there is relatively short residence time and a strong hydraulic connection between the aquifers. The estimated residence time (ca. 3000 years) is heavily dependent on the great uncertainty of the He concentration resulting from the low concentrations of He, the external 4He flux value adopted for calculation purposes and the 14C ages used to estimate the external 4He flux. © 2015, National Ground Water Association.

Sustainability assessment of energy technologies via social indicators: Results of a survey among European energy experts

International Nuclear Information System (INIS)

Gallego Carrera, Diana; Mack, Alexander

2010-01-01

Sustainability assessment of energy technologies oftentimes fails to account for social repercussions and long-term negative effects and benefits of energy systems. As part of the NEEDS project, an expert-based set of social indicators was developed and verified by the European stakeholders with the objective of contributing in the development of social indicators for the assessment of societal effects of energy systems. For this purpose, scientific experts from four sample countries France, Germany, Italy and Switzerland were interviewed to assess 16 different energy systems on a specific stakeholder reviewed indicator set. The indicator set covers the four main criteria: 'security and reliability of energy provision; 'political stability and legitimacy'; 'social and individual risks' and 'quality of life'. This article will review the process of indicator development and assessment and highlight results for today's most prominent and future energy technologies and some likely to make an impact in the future. Expert judgments varied considerably between countries and energy systems, with the exception of renewable technologies, which were overall positively assessed on almost all evaluation criteria.

Stability indicating spectrophotometric and spectrodensitometric methods for the determination of diatrizoate sodium in presence of its degradation product

Science.gov (United States)

Abd El-Rahman, Mohamed K.; Riad, Safaa M.; Abdel Gawad, Sherif A.; Fawaz, Esraa M.; Shehata, Mostafa A.

2015-02-01

Three sensitive, selective, and precise stability indicating methods for the determination of the X-ray contrast agent, diatrizoate sodium (DTA), in the presence of its acidic degradation product (highly cytotoxic 3,5 diamino metabolite) and in pharmaceutical formulation were developed and validated. The first method is a first derivative (D1) spectrophotometric one, which allows the determination of DTA in the presence of its degradate at 231.2 nm (corresponding to zero crossing of the degradate) over a concentration range of 2-24 μg/mL with mean percentage recovery 99.95 ± 0.97%. The second method is the first derivative of the ratio spectra (DD1) by measuring the peak amplitude at 227 nm over the same concentration range as D1 spectrophotometric method, with mean percentage recovery 99.99 ± 1.15%. The third method is a TLC-densitometric one, where DTA was separated from its degradate on silica gel plates using chloroform:methanol:ammonium hydroxide (20:10:2 by volume) as a developing system. This method depends on quantitative densitometric evaluation of thin layer chromatogram of DTA at 238 nm over a concentration range of 4-20 μg/spot, with mean percentage recovery 99.88 ± 0.89%. The selectivity of the proposed methods was tested using laboratory-prepared mixtures. The proposed methods have been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives. The results were statistically compared with the official US pharmacopeial method. No significant difference for either accuracy or precision was observed.

Application of Semiempirical Methods to Transition Metal Complexes: Fast Results but Hard-to-Predict Accuracy.

KAUST Repository

Minenkov, Yury

2018-05-22

A series of semiempirical PM6* and PM7 methods has been tested in reproducing of relative conformational energies of 27 realistic-size complexes of 16 different transition metals (TMs). An analysis of relative energies derived from single-point energy evaluations on density functional theory (DFT) optimized conformers revealed pronounced deviations between semiempirical and DFT methods indicating fundamental difference in potential energy surfaces (PES). To identify the origin of the deviation, we compared fully optimized PM7 and respective DFT conformers. For many complexes, differences in PM7 and DFT conformational energies have been confirmed often manifesting themselves in false coordination of some atoms (H, O) to TMs and chemical transformations/distortion of coordination center geometry in PM7 structures. Despite geometry optimization with fixed coordination center geometry leads to some improvements in conformational energies, the resulting accuracy is still too low to recommend explored semiempirical methods for out-of-the-box conformational search/sampling: careful testing is always needed.

Efficiency indicators versus forntier methods: an empirical investigation of italian public hospitals

Directory of Open Access Journals (Sweden)

Lorenzo Clementi

2013-05-01

Full Text Available Efficiency has a key-role in the measurement of the impact of the National Health Service (NHS reforms. We investigate the issue of inefficiency in health sector and provide empirical evidence derived from Italian public hospitals. Despite the importance of efficiency measurement in health care services, only recently advanced econometric methods have been applied to hospital data. We provide a synoptic survey of few empirical analyses of efficiency measurement in health care services. An estimate of the cost efficiency level in Italian public hospitals during 2001-2003 is obtained through a sample. We propose an efficiency indicator and provide cost frontiers for such hospitals, using stochastic frontier analysis (SFA for longitudinal data.

Life cycle analysis of electricity systems: Methods and results

International Nuclear Information System (INIS)

Friedrich, R.; Marheineke, T.

1996-01-01

The two methods for full energy chain analysis, process analysis and input/output analysis, are discussed. A combination of these two methods provides the most accurate results. Such a hybrid analysis of the full energy chains of six different power plants is presented and discussed. The results of such analyses depend on time, site and technique of each process step and, therefore have no general validity. For renewable energy systems the emissions form the generation of a back-up system should be added. (author). 7 figs, 1 fig

EQUITY SHARES EQUATING THE RESULTS OF FCFF AND FCFE METHODS

Directory of Open Access Journals (Sweden)

Bartłomiej Cegłowski

2012-06-01

Full Text Available The aim of the article is to present the method of establishing equity shares in weight average cost of capital (WACC, in which the value of loan capital results from the fixed assumptions accepted in the financial plan (for example a schedule of loan repayment and own equity is evaluated by means of a discount method. The described method causes that, regardless of whether cash flows are calculated as FCFF or FCFE, the result of the company valuation will be identical.

INTERINSTITUTIONAL COOPERATION: RESULTS INDICATORS OF INTERACTIONS OF VISITING RESEARCHERS IN HIGHER EDUCATION AND RESEARCH INSTITUTIONS

Directory of Open Access Journals (Sweden)

Fabricio Baron Mussi

2014-12-01

Full Text Available This paper aims to define a proposition for a characterization of indicators applicable to evaluate joint research results. In order to do that, literature on interinstitutional cooperation, exchange programs and indicators was assessed, and its guidelines, adopted. Ten cases were selected for evaluation, and the following procedures undertaken: visits to receptor institutions in several cities; visits to workplace where the subjected projects were being developed; interviews with project managers and visiting researchers; interviews with other personnel; review of the approved projects' official documentation collected during the previous steps; and a new contact with the respondents to clarify eventual doubts. Theoretically, this research contributes to the development of a proposal of a set of indicators to characterize and evaluate interdisciplinary cooperation between researchers from universities and distinct research institutes. Practical contributions to be mentioned are the information gathered that can help promotion agencies to improve their supporting edicts offered to scientific and technological development, as well as upgrading their evaluation systems regarding such actions.

Stability-Indicating Validated HPLC Method for Analysis of Berberine Hydrochloride and Trimethoprim in Pharmaceutical Dosage Form

Directory of Open Access Journals (Sweden)

Jing-Chun Wang

2013-01-01

Full Text Available A stability-indicating HPLC method was developed and validated for the determination of berberine hydrochloride and trimethoprim in pharmaceutical dosage form in the presence of degradation products. The proposed RP-HPLC method utilizes an Agilent TC-C18, 4.6 mm × 250 mm, 5 μm, column using a mobile phase consisting of acetonitrile-50 mM potassium dihydrogen phosphate (30 : 70, v/v, pH adjusted to 3 with orthophosphoric acid at a flow rate of 1.0 mL/min and UV detection at 271 nm. The linearity of berberine hydrochloride and trimethoprim was in the range of 2 to 60 μg/mL (r=0.9996 and 1 to 30 μg/mL (r=0.9995, respectively. Repeatability and intermediate precisions were also determined with percentage relative standard deviation (% RSD less than 2.0%. The limits of detection were found to be 9.8 ng/mL for berberine hydrochloride and 2.5 ng/mL for trimethoprim. The mean recoveries for berberine hydrochloride and trimethoprim were 99.8 and 98.8%, respectively. The stability of the two drugs was determined under different conditions and the proposed method has shown effective separation for their degradation products. And the proposed assays method can thus be considered stability-indicating.

Steady-state transport equation resolution by particle methods, and numerical results

International Nuclear Information System (INIS)

Mercier, B.

1985-10-01

A method to solve steady-state transport equation has been given. Principles of the method are given. The method is studied in two different cases; estimations given by the theory are compared to numerical results. Results got in 1-D (spherical geometry) and in 2-D (axisymmetric geometry) are given [fr

Development, validation and comparison of two stability-indicating RP-LC methods using charged aerosol and UV detectors for analysis of lisdexamfetamine dimesylate in capsules

Directory of Open Access Journals (Sweden)

Graciela Carlos

2016-11-01

Full Text Available Two new stability-indicating liquid chromatographic methods using two detectors, an ultraviolet (UV and a charged aerosol detector (CAD simultaneously connected in series were validated for the assessment of lisdexamfetamine dimesylate (LDX in capsule. The method was optimized and the influence of individual parameters on UV and CAD response and sensitivity was studied. Chromatography was performed on a Zorbax CN column (250 mm × 4.6 mm, 5 μm in an isocratic elution mode, using acetonitrile and 20 mM ammonium formate at pH 4.0 (50:50, v/v as mobile phase and UV detection at 207 nm. The developed method was validated according to ICH guidelines and the parameters’ specificity, limit of detection, limit of quantitation, linearity, accuracy, precision and robustness were evaluated. CAD is designated to be a non-linear detector in a wide dynamic range, however, the method was linear over the concentration range of 70–130 μg mL−1 in both detectors. The method was precise and accurate. Robustness study was performed by a Plackett–Burman design, delivering results within the acceptable range. Neither the excipients nor the degradation products showed interference in the method after studies of specificity as well as under stress conditions. The results of the LC-UV and LC-CAD methods were statistically compared through ANOVA and showed no significant difference (p > 0.05. Both proposed methods could be considered interchangeable and stability-indicating, and can be applied as an appropriate quality control tool for routine analysis of LDX in capsule.

A Fuzzy Logic Based Method for Analysing Test Results

Directory of Open Access Journals (Sweden)

Le Xuan Vinh

2017-11-01

Full Text Available Network operators must perform many tasks to ensure smooth operation of the network, such as planning, monitoring, etc. Among those tasks, regular testing of network performance, network errors and troubleshooting is very important. Meaningful test results will allow the operators to evaluate network performanceof any shortcomings and to better plan for network upgrade. Due to the diverse and mainly unquantifiable nature of network testing results, there is a needs to develop a method for systematically and rigorously analysing these results. In this paper, we present STAM (System Test-result Analysis Method which employs a bottom-up hierarchical processing approach using Fuzzy logic. STAM is capable of combining all test results into a quantitative description of the network performance in terms of network stability, the significance of various network erros, performance of each function blocks within the network. The validity of this method has been successfully demonstrated in assisting the testing of a VoIP system at the Research Instiute of Post and Telecoms in Vietnam. The paper is organized as follows. The first section gives an overview of fuzzy logic theory the concepts of which will be used in the development of STAM. The next section describes STAM. The last section, demonstrating STAM’s capability, presents a success story in which STAM is successfully applied.

Developing biodiversity indicators on a stakeholders' opinions basis: the gypsum industry Key Performance Indicators framework.

Science.gov (United States)

Pitz, Carline; Mahy, Grégory; Vermeulen, Cédric; Marlet, Christine; Séleck, Maxime

2016-07-01

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.

Development of Mental Health Indicators in Korea

Science.gov (United States)

Han, Hyeree; Ahn, Dong Hyun; Song, Jinhee; Hwang, Tae Yeon

2012-01-01

Objective Promoting mental health and preventing mental health problems are important tasks for international organizations and nations. Such goals entail the establishment of active information networks and effective systems and indicators to assess the mental health of populations. This being said, there is a need in Korea develop ways to measure the state of mental health in Korea. Methods This paper reviews the mental health indicator development policies and practices of seven organizations, countries, and regions: WHO, OECD, EU, United States, Australia, UK, and Scotland. Using Delphi method, we conducted two surveys of mental health indicators for experts in the field of mental health. The survey questionnaire included 5 domains: mental health status, mental health factor, mental health system, mental health service, and quality of mental health services. We considered 124 potential mental health indicators out of more than 600 from indicators of international organizations and foreign countries. Results We obtained the top 30 mental health indicators from the surveys. Among them, 10 indicators belong to the mental health system. The most important five mental health indicators are suicide rate, rate of increase in mental disorder treatment, burden caused by mental disorders, adequacy of identifying problems of mental health projects and deriving solutions, and annual prevalence of mental disorders. Conclusion Our study provides information about the process for indicator development and the use of survey results to measure the mental health status of the Korean population. The aim of mental health indicator development is to improve the mental health system by better grasping the current situation. We suggest these mental health indicators can monitor progress in efforts to implement reform policies, provide community services, and involve users, families and other stakeholders in mental health promotion, prevention, care and rehabilitation. PMID:23251193

A novel validated stability indicating high performance liquid chromatographic method for estimation of degradation behavior of ciprofloxacin and tinidazole in solid oral dosage

Directory of Open Access Journals (Sweden)

Bhupendrasinh K Vaghela

2013-01-01

Full Text Available Objective: The objective of current investigation was to study the degradation behavior of Ciprofloxacin and Tinidazole. The study was performed as per International Conference on Harmonization recommended stress condition. A novel stability-indicating reverse phase HPLC method was developed for the determination of Ciprofloxacin and Tinidazole purity in the presence of its impurities and forced degradation products. This method is also capable to separate placebo peaks as well in pharmaceutical dosage forms. The solid oral dosage form was subjected to the stress conditions such as oxidative, acid, base hydrolysis, heat and photolytic degradation. Materials and Methods: The method was developed using Waters symmetry shield, Reverse Phase (RP C18, 250mm x 4.6mm, 5΅ as a stationary phase. The mobile phase containing a gradient mixture of solvent A and B. 10mM phosphate buffer, adjusted pH 3.0 with phosphoric acid was used as a buffer. Buffer pH 3.0 was used as solvent A and buffer pH 3.0: Acetonitrile in the ratio of 20: 80 v/v were used as solvent B. The eluted compounds were monitored 278 nm (Ciprofloxacin, 317 nm (Tinidazole. The run time was 50 minute. Results: In the precision study the % RSD for the result of Ciprofloxacin, Tinidazole and its impurities was below 10%. The method was linear with the correlation coefficient greater than 0.997. The percentage recoveries were calculated and observed from 93.0% to 106.7%.The peak purity of Ciprofloxacin, Tinidazole peak had not shown any flag, thus proved the stability-indicating power of the method. Conclusion: The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness.

DEVELOPMENT OF THE LEVEL INDICES SYSTEM OF UNIVERSITY INTERNATIONALIZATION

Directory of Open Access Journals (Sweden)

Artem R. Denisov

2015-01-01

Full Text Available The aim of the investigation is to show possible variants of audit in the higher educational institution while processes of internationalisation (procedures of definition of its level; to find out an estimation method of the received results in the given sphere.Methods. The methods involve comparative analysis, synthesis, range and systematization of information concerning the discussed problem.Results and scientific novelty. The necessity of universities participating in internationalization processes is proved. Existing approaches to internationalization evaluation levels are reviewed, as well as best practices for each criterion. Level indicators of considered process are proposed due to summarising the results of the given review, and also as a result of the coordination of criteria NAFSA and authors’ system of indicators: international programs supporting by a university administration, curricular changes, faculty involving into international research, faculty involving into teaching process, students participation, abroad study support, international students and teachers support. The research demonstrates that to improve the adequacy the system of indicators has to be supplemented with some indicators to evaluate the conformity of a university’s internationalization to its mission; the conformity of a university’s internationalization to the government geopolitics; extracurricular activities of students; cultural aspects of internationalization including communication with local ethnical groups; attractiongetting mechanisms for international students.Practical significance. The proposed system of indicators can be used for an estimation of high school development in internationalisation sphere, and under certain correction and improvement for efficiency definition of development of its academic divisions in the given field.

Endovascular Aortic Aneurysm Repair with Chimney and Snorkel Grafts: Indications, Techniques and Results

Energy Technology Data Exchange (ETDEWEB)

Patel, Rakesh P., E-mail: rpatel9@nhs.net [Northwick Park Hospital, Department of Vascular Radiology (United Kingdom); Katsargyris, Athanasios, E-mail: kthanassos@yahoo.com; Verhoeven, Eric L. G., E-mail: Eric.Verhoeven@klinikum-nuernberg.de [Klinikum Nuernberg, Department of Vascular and Endovascular Surgery (Germany); Adam, Donald J., E-mail: donald.adam@tiscali.co.uk [Heartlands Hospital, Department of Vascular Surgery (United Kingdom); Hardman, John A., E-mail: johnhardman@doctors.org.uk [Royal United Hospital Bath, Department of Vascular Radiology (United Kingdom)

2013-12-15

The chimney technique in endovascular aortic aneurysm repair (Ch-EVAR) involves placement of a stent or stent-graft parallel to the main aortic stent-graft to extend the proximal or distal sealing zone while maintaining side branch patency. Ch-EVAR can facilitate endovascular repair of juxtarenal and aortic arch pathology using available standard aortic stent-grafts, therefore, eliminating the manufacturing delays required for customised fenestrated and branched stent-grafts. Several case series have demonstrated the feasibility of Ch-EVAR both in acute and elective cases with good early results. This review discusses indications, technique, and the current available clinical data on Ch-EVAR.

Xeroradiography. Principles, characteristics and method indications

International Nuclear Information System (INIS)

Uemura, L.; Forni, S.S.; Abreu Neto, B.P.; Broccoli Neto, J.; Abilio, S.O.

1987-01-01

The xeroradiography is an entirely photoeletric process to obtain the radiographic image, employing a selenium plate instead of the conventional radiologic film. A revision of the physical principles and technical aspects of the method is presented, and the characteristics of xeroradiographic images are explained. The applications of xeroradiography include evaluation of breast, structures of the neck soft tissues tumors and some bone tumors for soft tissue components, foreign body detection in soft issues and visualization of the smaller skeletal structures of the extremeties. (Author) [pt

Analytical Method Validation of High-Performance Liquid Chromatography and Stability-Indicating Study of Medroxyprogesterone Acetate Intravaginal Sponges

Directory of Open Access Journals (Sweden)

Nidal Batrawi

2017-02-01

Full Text Available Medroxyprogesterone acetate is widely used in veterinary medicine as intravaginal dosage for the synchronization of breeding cycle in ewes and goats. The main goal of this study was to develop reverse-phase high-performance liquid chromatography method for the quantification of medroxyprogesterone acetate in veterinary vaginal sponges. A single high-performance liquid chromatography/UV isocratic run was used for the analytical assay of the active ingredient medroxyprogesterone. The chromatographic system consisted of a reverse-phase C18 column as the stationary phase and a mixture of 60% acetonitrile and 40% potassium dihydrogen phosphate buffer as the mobile phase; the pH was adjusted to 5.6. The method was validated according to the International Council for Harmonisation (ICH guidelines. Forced degradation studies were also performed to evaluate the stability-indicating properties and specificity of the method. Medroxyprogesterone was eluted at 5.9 minutes. The linearity of the method was confirmed in the range of 0.0576 to 0.1134 mg/mL ( R 2 > 0.999. The limit of quantification was shown to be 3.9 µg/mL. Precision and accuracy ranges were found to be %RSD <0.2 and 98% to 102%, respectively. Medroxyprogesterone capacity factor value of 2.1, tailing factor value of 1.03, and resolution value of 3.9 were obtained in accordance with ICH guidelines. Based on the obtained results, a rapid, precise, accurate, sensitive, and cost-effective analysis procedure was proposed for quantitative determination of medroxyprogesterone in vaginal sponges. This analytical method is the only available method to analyse medroxyprogesterone in veterinary intravaginal dosage form.

Lipoprotein metabolism indicators improve cardiovascular risk prediction.

Directory of Open Access Journals (Sweden)

Daniël B van Schalkwijk

Full Text Available BACKGROUND: Cardiovascular disease risk increases when lipoprotein metabolism is dysfunctional. We have developed a computational model able to derive indicators of lipoprotein production, lipolysis, and uptake processes from a single lipoprotein profile measurement. This is the first study to investigate whether lipoprotein metabolism indicators can improve cardiovascular risk prediction and therapy management. METHODS AND RESULTS: We calculated lipoprotein metabolism indicators for 1981 subjects (145 cases, 1836 controls from the Framingham Heart Study offspring cohort in which NMR lipoprotein profiles were measured. We applied a statistical learning algorithm using a support vector machine to select conventional risk factors and lipoprotein metabolism indicators that contributed to predicting risk for general cardiovascular disease. Risk prediction was quantified by the change in the Area-Under-the-ROC-Curve (ΔAUC and by risk reclassification (Net Reclassification Improvement (NRI and Integrated Discrimination Improvement (IDI. Two VLDL lipoprotein metabolism indicators (VLDLE and VLDLH improved cardiovascular risk prediction. We added these indicators to a multivariate model with the best performing conventional risk markers. Our method significantly improved both CVD prediction and risk reclassification. CONCLUSIONS: Two calculated VLDL metabolism indicators significantly improved cardiovascular risk prediction. These indicators may help to reduce prescription of unnecessary cholesterol-lowering medication, reducing costs and possible side-effects. For clinical application, further validation is required.

Stability Indicating HPLC Method for Simultaneous Quantification of Trihexyphenidyl Hydrochloride, Trifluoperazine Hydrochloride and Chlorpromazine Hydrochloride from Tablet Formulation

Directory of Open Access Journals (Sweden)

P. Shetti

2010-01-01

Full Text Available A new, simple, precise, rapid, selective and stability indicating reversed-phase high performance liquid chromatographic (HPLC method has been developed and validated for simultaneous quantification of trihexyphenidyl hydrochloride, trifluoperazine hydrochloride and chlorpromazine hydrochloride from combined tablet formulation. The method is based on reverse-phase using C-18 (250×4.6 mm, 5 μm particle size column. The separation is achieved using isocratic elution by methanol and ammonium acetate buffer (1% w/v, pH 6.5 in the ratio of 85:15 v/v, pumped at flow rate 1.0 mL/min and UV detection at 215 nm. The column is maintained at 30 °C through out the analysis. This method gives baseline resolution. The total run time is 15 min. Stability indicating capability is established buy forced degradation experiment. The method is validated for specificity, accuracy, precision and linearity as per International conference of harmonisation (ICH. The method is accurate and linear for quantification of trihexyphenidyl hydrochloride, trifluoperazine hydrochloride and Chlorpromazine hydrochloride between 5 - 15 μg/mL, 12.5- 37.5 μg/mL and 62.5 - 187.5 μg/mL respectively.

New insights into the methodological issues of the indicator amino acid oxidation method in preterm neonates

NARCIS (Netherlands)

de Groof, F.; Huang, L.S.; Twisk, J.W.R.; Voortman, G.J.; Joemai, W.; Hau, C.H.; Schierbeek, H.; Chen, C.; Huang, Y.; van Goudoever, J.B.

2013-01-01

Background: We determined the effect of adaptation to the study diet on oxidation of the indicator amino acid and the required tracer washout time in preterms. Methods: Subjects received a study diet for 6 d that entailed a 50% reduction in leucine. Tracer studies using enterally infused [ 13

A non-destructive ammonium detection method as indicator for freshness for packed fish: Application on cod

NARCIS (Netherlands)

Heising, J.K.; Dekker, M.; Bartels, P.V.; Boekel, van M.A.J.S.

2012-01-01

This paper introduces a non-destructive method for monitoring headspace ammonium as an indicator for changes in the freshness status of packed fish. Electrodes in an aqueous phase in the package monitor changes in the concentration of ammonia produced in/on the packed fish and released in the

Risk factors and indices of osteomyelitis of the jaw in osteoporosis patients: results from a hospital-based cohort study in Japan.

Directory of Open Access Journals (Sweden)

Toru Yamazaki

Full Text Available BACKGROUND: Several studies have reported osteomyelitis of the jaw (OMJ as a side effect of bisphosphonates (BPs, and the risk of oral BPs has been recently clarified. However, other systemic risk factors of OMJ remain unclear. Importantly, the possibility of risk classification based on the clinical characteristics of patients has not been explored. Here, we clarified risk factors of OMJ and evaluate the predictive accuracy of risk indices in osteoporosis patients. METHODS: We performed sub-analysis using a database developed for a retrospective cohort study in patients taking medications for osteoporosis at Kyoto University Hospital. Risk indices for OMJ were constructed using logistic regression analysis, and odds ratios (OR for OMJ cases and 95% confidence intervals (CI were estimated. Potential risk factors included in the statistical analysis were age; sex; diabetes; use of oral BPs, corticosteroids, cancer chemotherapy, antirheumatic drugs, and biologic agents; and their interactions. Risk indices were calculated by the sum of potential risk factors of an individual patient multiplied by the regression coefficients. The discriminatory power of the risk indices was assessed by receiver operating characteristic (ROC analysis. RESULTS: In analysis of all patients, oral BPs (OR: 4.98, 95% CIs: 1.94-12.75, age (OR: 1.28, 95% CI: 1.06-1.60 and sex-chemotherapy interaction (OR: 11.70, 95% CI: 1.46-93.64 were significant risk factors of OMJ. Areas under the ROC curves of these risk indices provided moderate sensitivity or specificity regardless of group (0.683 to 0.718. CONCLUSIONS: Our data suggest that oral BP use, age, and sex-chemotherapy are predictors of OMJ in osteoporosis patients. The risk indices are moderately high, and allow the prediction of OMJ incidence.

Stability indicating RP-HPLC method for simultaneous determination of pantoprazole sodium and itopride hydrochloride in bulk and capsule

Directory of Open Access Journals (Sweden)

Krishna R. Gupta

2011-03-01

Full Text Available A stability indicating reversed-phase HPLC method has been developed and subsequently validated for simultaneous estimation of pantoprazole present as pantoprazole sodium sesquihydrate (PSS, and itopride hydrochloride from their combination product. The proposed RP-HPLC method utilizes a Phenomenex® C18, 5 µm, 250 mm X 4.6 mm i.d. column, mobile phase consisting of phosphate buffer and acetonitrile in the proportion of 55:45 (v/v with apparent pH adjusted to 5.0, and UV detection at 289.0 nm using a UV detector. PAN, ITH and their combination drug product were exposed to thermal, photolytic, hydrolytic and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. The described method was linear over a range of 4-20 µg/mL for PAN and 15-75 µg/mL for ITH. The mean recoveries were 100.02 and 99.88 for PAN and ITH, respectively. Chromatographic peak purity data of PAN and ITH indicated no co-eluting peaks with the main peaks of drugs which demonstrated the specificity of assay method for their estimation in presence of degradation products. The proposed method can be useful in the quality control of combination drug products.

Impact of community-based interventions on maternal and neonatal health indicators: Results from a community randomized trial in rural Balochistan, Pakistan

Directory of Open Access Journals (Sweden)

Becker Stan

2010-11-01

Full Text Available Abstract Background Pakistan has high maternal mortality, particularly in the rural areas. The delay in decision making to seek medical care during obstetric emergencies remains a significant factor in maternal mortality. Methods We present results from an experimental study in rural Pakistan. Village clusters were randomly assigned to intervention and control arms (16 clusters each. In the intervention clusters, women were provided information on safe motherhood through pictorial booklets and audiocassettes; traditional birth attendants were trained in clean delivery and recognition of obstetric and newborn complications; and emergency transportation systems were set up. In eight of the 16 intervention clusters, husbands also received specially designed education materials on safe motherhood and family planning. Pre- and post-intervention surveys on selected maternal and neonatal health indicators were conducted in all 32 clusters. A district-wide survey was conducted two years after project completion to measure any residual impact of the interventions. Results Pregnant women in intervention clusters received prenatal care and prophylactic iron therapy more frequently than pregnant women in control clusters. Providing safe motherhood education to husbands resulted in further improvement of some indicators. There was a small but significant increase in percent of hospital deliveries but no impact on the use of skilled birth attendants. Perinatal mortality reduced significantly in clusters where only wives received information and education in safe motherhood. The survey to assess residual impact showed similar results. Conclusions We conclude that providing safe motherhood education increased the probability of pregnant women having prenatal care and utilization of health services for obstetric complications.

Evaluation of methods to sample fecal indicator bacteria in foreshore sand and pore water at freshwater beaches.

Science.gov (United States)

Vogel, Laura J; Edge, Thomas A; O'Carroll, Denis M; Solo-Gabriele, Helena M; Kushnir, Caitlin S E; Robinson, Clare E

2017-09-15

Fecal indicator bacteria (FIB) are known to accumulate in foreshore beach sand and pore water (referred to as foreshore reservoir) where they act as a non-point source for contaminating adjacent surface waters. While guidelines exist for sampling surface waters at recreational beaches, there is no widely-accepted method to collect sand/sediment or pore water samples for FIB enumeration. The effect of different sampling strategies in quantifying the abundance of FIB in the foreshore reservoir is unclear. Sampling was conducted at six freshwater beaches with different sand types to evaluate sampling methods for characterizing the abundance of E. coli in the foreshore reservoir as well as the partitioning of E. coli between different components in the foreshore reservoir (pore water, saturated sand, unsaturated sand). Methods were evaluated for collection of pore water (drive point, shovel, and careful excavation), unsaturated sand (top 1 cm, top 5 cm), and saturated sand (sediment core, shovel, and careful excavation). Ankle-depth surface water samples were also collected for comparison. Pore water sampled with a shovel resulted in the highest observed E. coli concentrations (only statistically significant at fine sand beaches) and lowest variability compared to other sampling methods. Collection of the top 1 cm of unsaturated sand resulted in higher and more variable concentrations than the top 5 cm of sand. There were no statistical differences in E. coli concentrations when using different methods to sample the saturated sand. Overall, the unsaturated sand had the highest amount of E. coli when compared to saturated sand and pore water (considered on a bulk volumetric basis). The findings presented will help determine the appropriate sampling strategy for characterizing FIB abundance in the foreshore reservoir as a means of predicting its potential impact on nearshore surface water quality and public health risk. Copyright © 2017 Elsevier Ltd. All rights

Integrating Methods for Developing Sustainability Indicators to Facilitate Learning and Action

Directory of Open Access Journals (Sweden)

Mark Reed

2005-06-01

Full Text Available Bossel's (2001 systems-based approach for deriving comprehensive indicator sets provides one of the most holistic frameworks for developing sustainability indicators. It ensures that indicators cover all important aspects of system viability, performance, and sustainability, and recognizes that a system cannot be assessed in isolation from the systems upon which it depends and which in turn depend upon it. In this reply, we show how Bossel's approach is part of a wider convergence toward integrating participatory and reductionist approaches to measure progress toward sustainable development. However, we also show that further integration of these approaches may be able to improve the accuracy and reliability of indicators to better stimulate community learning and action. Only through active community involvement can indicators facilitate progress toward sustainable development goals. To engage communities effectively in the application of indicators, these communities must be actively involved in developing, and even in proposing, indicators. The accuracy, reliability, and sensitivity of the indicators derived from local communities can be ensured through an iterative process of empirical and community evaluation. Communities are unlikely to invest in measuring sustainability indicators unless monitoring provides immediate and clear benefits. However, in the context of goals, targets, and/or baselines, sustainability indicators can more effectively contribute to a process of development that matches local priorities and engages the interests of local people.

A result-driven minimum blocking method for PageRank parallel computing

Science.gov (United States)

Tao, Wan; Liu, Tao; Yu, Wei; Huang, Gan

2017-01-01

Matrix blocking is a common method for improving computational efficiency of PageRank, but the blocking rules are hard to be determined, and the following calculation is complicated. In tackling these problems, we propose a minimum blocking method driven by result needs to accomplish a parallel implementation of PageRank algorithm. The minimum blocking just stores the element which is necessary for the result matrix. In return, the following calculation becomes simple and the consumption of the I/O transmission is cut down. We do experiments on several matrixes of different data size and different sparsity degree. The results show that the proposed method has better computational efficiency than traditional blocking methods.

An indicator-based method for quantifying farm multifunctionality

DEFF Research Database (Denmark)

Andersen, Peter Stubkjær; Vejre, Henrik; Dalgaard, Tommy

2013-01-01

. The farm data that support the indicators is derived from an interview survey conducted in 2008. The aggregated function scores vary with farm size as well as farm type; smaller, hobby-based farms in general score highest in the residence function whereas bigger, full-time farms score highest...

Experience with diagnostic laparoscopy for gynecological indications

African Journals Online (AJOL)

2012-02-27

Feb 27, 2012 ... Nigerian Journal of Clinical Practice • Apr-Jun 2013 • Vol 16 • Issue 2 ... Statistical Analysis Used: Simple percentage method was used. Results: Infertility was the commonest indication for 1627 (98.4%) procedures, while ...

Stability-indicating RP-HPLC method for simultaneous determination of gatifloxacin and flurbiprofen in binary combination

Directory of Open Access Journals (Sweden)

Islam Ullah Khan

2014-04-01

Full Text Available A stability-indicating RP-HPLC method is presented for determination of gatifloxacin and flurbiprofen in binary combination. Gatifloxacin, flurbiprofen and their degradation products were detected at 254 nm using a BDS Hypersil C8 (250 X 4.6 mm, 5 µm column and mixture of 20 mM phosphate buffer (pH 3.0 and methanol 30:70 v/v as mobile phase. Response was linear over the range of 15-105 mg mL-1 for gatifloxacin (r² > 0.998 and of 1.5-10.5 mg mL-1 for flurbiprofen (r² > 0.999. The developed method efficiently separated the analytical peaks from degradation products (peak purity index > 0.9999. The method developed can be applied successfully for determination of gatifloxacin and flurbiprofen in human serum, urine, pharmaceutical formulations, and their stability studies.

ANA Testing: What should we know about the methods, indication and interpretation?

Directory of Open Access Journals (Sweden)

Au Elaine Yuen Ling

2017-11-01

Full Text Available Though ANA is a common test requested in several settings, one may not be aware of the potential traps for interpretation. Nowadays, there is a trend for autoantibodies diagnostics to move from traditional time honored manual methods to high throughput automated platforms. Nevertheless, the clinical significance and assay performance characteristics may be different from those “historical” methods. Though indirect immunofluorescence is the gold standard method for ANA tests, different laboratories vary in the slides (from different cell lines and commercial source, e.g., Hep 2, Hep 2000, etc., screening dilutions, terminology, reporting format and expertise. Hence, discrepancy in results among different laboratories is not uncommon and could be confusing. Knowing the assay characteristic and limitations helps proper results interpretation and facilitate patient’s management. Indeed, the titer and pattern by indirect immunofluorescence do provide valuable information in screening patients. In particular, DFS pattern with the associated anti-DFS70 antibodies has been shown to have a role to risk stratify cases referred for suspected autoimmune rheumatic disease.

Correlation and network analysis of global financial indices.

Science.gov (United States)

Kumar, Sunil; Deo, Nivedita

2012-08-01

Random matrix theory (RMT) and network methods are applied to investigate the correlation and network properties of 20 financial indices. The results are compared before and during the financial crisis of 2008. In the RMT method, the components of eigenvectors corresponding to the second largest eigenvalue form two clusters of indices in the positive and negative directions. The components of these two clusters switch in opposite directions during the crisis. The network analysis uses the Fruchterman-Reingold layout to find clusters in the network of indices at different thresholds. At a threshold of 0.6, before the crisis, financial indices corresponding to the Americas, Europe, and Asia-Pacific form separate clusters. On the other hand, during the crisis at the same threshold, the American and European indices combine together to form a strongly linked cluster while the Asia-Pacific indices form a separate weakly linked cluster. If the value of the threshold is further increased to 0.9 then the European indices (France, Germany, and the United Kingdom) are found to be the most tightly linked indices. The structure of the minimum spanning tree of financial indices is more starlike before the crisis and it changes to become more chainlike during the crisis. The average linkage hierarchical clustering algorithm is used to find a clearer cluster structure in the network of financial indices. The cophenetic correlation coefficients are calculated and found to increase significantly, which indicates that the hierarchy increases during the financial crisis. These results show that there is substantial change in the structure of the organization of financial indices during a financial crisis.

Development and validation of a stability-indicating RP-HPLC method for determination of atomoxetine hydrochloride in tablets.

Science.gov (United States)

Patel, Sejal K; Patel, Natvarlal J

2010-01-01

This paper describes the development of a stability-indicating RP-HPLC method for the determination of atomoxetine hydrochloride (ATX) in the presence of its degradation products generated from forced decomposition studies. The drug substance was subjected to stress conditions of acid, base, oxidation, wet heat, dry heat, and photodegradation. In stability tests, the drug was susceptible to acid, base, oxidation, and dry and wet heat degradation. It was found to be stable under the photolytic conditions tested. The drug was successfully separated from the degradation products formed under stress conditions on a Phenomenex C18 column (250 x 4.6 mm id, 5 microm particle size) by using acetonitrile-methanol-0.032 M ammonium acetate (55 + 05 + 40, v/v/v) as the mobile phase at 1.0 mL/min and 40 degrees C. Photodiode array detection at 275 nm was used for quantitation after RP-HPLC over the concentration range of 0.5-5 microg/mL with a mean recovery of 100.8 +/- 0.4% for ATX. Statistical analysis demonstrated that the method is repeatable, specific, and accurate for the estimation of ATX. Because the method effectively separates the drug from its degradation products, it can be used as a stability-indicating method.

Indicators for Research Performance in the Humanities? The Scholars’ View on Research Quality and Indicators

Energy Technology Data Exchange (ETDEWEB)

Ochsner, M.; Hug, S.E.

2016-07-01

In this paper, we present indicators for research quality in the humanities collected in our previous work (Ochsner, Hug, & Daniel, 2012). We focus on how these indicators are accepted by humanities scholars. We also investigate differences between different subgroups of the humanities scholars we surveyed with regard to their preferences for such indicators. We address the theme of the conference (‘peripheries frontiers and beyond’) regarding two notions of (scientometric) periphery: First, we investigate indicators for research quality in the humanities, a field where there is a lack on knowledge on how to assess or even measure research quality, in fact, there is a quite broad consensus that (evaluative) bibliometrics cannot be readily applied in the humanities (Hicks, 2004; Nederhof, 2006). Second, we fully cover three humanities disciplines at Swiss universities and member universities of the League of European Research Universities (LERU). Scholars are a neglected stakeholder when it comes to the design of research assessment procedures or the selection of research indicators. However, they are directly affected, they know best what research quality in their field is and what impact the use of certain indicators could have on their research practices. The paper is structured as follows: first, we present the background for selecting indicators for research quality. This is followed by a description of our analysis methods and the presentation of the results. We finally discuss the results with regard to their use in research evaluation. (Author)

Evaluative Indices Assigned to Contraceptive Methods by University Undergraduates

Science.gov (United States)

McDermott, Robert J.; Malo, Teri L.; Dodd, Virginia J.; Daley, Ellen M.; Mayer, Alyssa B.

2011-01-01

Background: Preordinate attitudes and beliefs about contraception may influence acceptance or rejection of a particular method. Purpose: We examined the attitudes about contraception methods held by undergraduate students (N=792) at two large southeastern universities in the United States. Methods: Twelve methods were rated on 40 semantic…

Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

OpenAIRE

Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

2016-01-01

Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm), u...

A validated stability-indicating LC method for the separation of enantiomer and potential impurities of Linezolid using polar organic mode

Directory of Open Access Journals (Sweden)

T. Satyanarayana Raju

2012-08-01

Full Text Available Although a number of methods are available for evaluating Linezolid and its possible impurities, a common method for separation if its potential impurities, degradants and enantiomer in a single method with good efficiency remain unavailable. With the objective of developing an advanced method with shorter runtimes, a simple, precise, accurate stability-indicating LC method was developed for the determination of purity of Linezolid drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. This method is capable of separating all the related substances of Linezolid along with the chiral impurity. This method can also be used for the estimation of assay of Linezolid in drug substance as well as in drug product. The method was developed using Chiralpak IA (250 mm×4.6 mm, 5 μm column. A mixture of acetonitrile, ethanol, n-butyl amine and trifluoro acetic acid in 96:4:0.10:0.16 (v/v/v/v ratio was used as a mobile phase. The eluted compounds were monitored at 254 nm. Linezolid was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH guidelines with respect to specificity, limit of detection, limit of quantification, precision, linearity, accuracy, robustness and system suitability. Keywords: HPLC, Linezolid, Validation, Polar organic mode, Stability-indicating

Nonclassicality indicator for the real phase-space distribution functions

International Nuclear Information System (INIS)

Sadeghi, Parvin; Khademi, Siamak; Nasiri, Sadollah

2010-01-01

Benedict et al. and Kenfack et al. advocated nonclassicality indicators based on the measurement of negativity of the Wigner distribution functions. These indicators have some applications in quantum mechanics and quantum optics. In this paper we define a nonclassicality indicator in terms of the interference in phase space, which is applicable to some real distribution functions including those of Wigner. As a special case one may reproduce the previous results using our indicator for the Wigner distribution functions. This indicator is examined for cases of the Schroedinger cat state and the thermal states and the results are compared with those obtained by previous methods. It seems that the physical behavior of nonclassicality indicators originates in the uncertainty principle. This is shown by an onto correspondence between these indicators and the uncertainty principle.

Quality indicators for eye bank

Directory of Open Access Journals (Sweden)

Manisha Acharya

2018-01-01

Full Text Available Purpose: The aim of this study is to identify quality indicators of the eye bank and validate their effectivity. Methods: Adverse reaction rate, discard rate, protocol deviation rate, and compliance rate were defined as Quality Indicators of the eye bank. These were identified based on definition of quality that captures two dimensions – “result quality” and “process quality.” The indicators were measured and tracked as part of quality assurance (QA program of the eye bank. Regular audits were performed to validate alignment of standard operating procedures (SOP with regulatory and surgeon acceptance standards and alignment of activities performed in the eye bank with the SOP. Prospective study of the indicators was performed by comparing their observed values over the period 2011–2016. Results: Adverse reaction rate decreased more than 8-fold (from 0.61% to 0.07%, discard rate decreased and stabilized at 30%, protocol deviation rate decreased from 1.05% to 0.08%, and compliance rate reported by annual quality audits improved from 59% to 96% at the same time. In effect, adverse reaction rate, discard rate, and protocol deviation rate were leading indicators, and compliance rate was the trailing indicator. Conclusion: These indicators fulfill an important gap in available literature on QA in eye banking. There are two ways in which these findings can be meaningful. First, eye banks which are new to quality measurement can adopt these indicators. Second, eye banks which are already deeply engaged in quality improvement can test these indicators in their eye bank, thereby incorporating them widely and improving them over time.

Research on energy efficiency evaluation based on indicators for industry sectors in China

International Nuclear Information System (INIS)

Song, Chenxi; Li, Mingjia; Wen, Zhexi; He, Ya-Ling; Tao, Wen-Quan; Li, Yangzhe; Wei, Xiangyang; Yin, Xiaolan; Huang, Xing

2014-01-01

Highlights: • We try to evaluate energy efficiency of industry at the plant-level. • The Hierarchical–Indicator Comparison (HIC) method is proposed. • The HIC method can be implemented based on indicators at multi-levels. • The purified terephthalic acid (PTA) industry is used to illustrate the HIC method. • The construction procedure of indicators and the way to use them are presented. - Abstract: The so-called Hierarchical–Indicator Comparison (HIC) method is introduced in this paper. It mainly serves for industrial energy conservation programs in China. A chemical industry named purified terephthalic acid (PTA) is used to outline this method. Two key points of the HIC method are the construction of energy efficiency indicators (EEI) system and the way to utilize indicators appropriately. After a brief review of EE evaluation methods in literature, the construction procedure of energy efficiency indicators (EEI) system for PTA industry is presented firstly. How to correct reference values for indicators according to non-comparable factors is discussed. Then, how to implement the HIC method based on EEI system is presented. Every indicator has its own advantages and disadvantages. Disadvantages of an indicator can be conquered by other indicators. With multiple indicators used together, more objective EE evaluation result can be obtained. Finally, some proposals for further work of this method are also presented

Stability Indicating LC-Method for Estimation of Paracetamol and Lornoxicam in Combined Dosage Form

OpenAIRE

Shah, Dimal A.; Patel, Neel J.; Baldania, Sunil L.; Chhalotiya, Usman K.; Bhatt, Kashyap K.

2011-01-01

A simple, specific and stability indicating reversed phase high performance liquid chromatographic method was developed for the simultaneous determination of paracetamol and lornoxicam in tablet dosage form. A Brownlee C-18, 5 μm column having 250×4.6 mm i.d. in isocratic mode, with mobile phase containing 0.05 M potassium dihydrogen phosphate:methanol (40:60, v/v) was used. The flow rate was 1.0 ml/min and effluents were monitored at 266 nm. The retention times of paracetamol and lornoxicam ...

Vulnerability assessment of archaeological sites to earthquake hazard: An indicator based method integrating spatial and temporal aspects

Directory of Open Access Journals (Sweden)

Despina Minos-Minopoulos

2017-07-01

Full Text Available Across the world, numerous sites of cultural heritage value are at risk from a variety of human-induced and natural hazards such as war and earthquakes. Here we present and test a novel indicator-based method for assessing the vulnerability of archaeological sites to earthquakes. Vulnerability is approached as a dynamic element assessed through a combination of spatial and temporal parameters. The spatial parameters examine the susceptibility of the sites to the secondary Earthquake Environmental Effects of ground liquefaction, landslides and tsunami and are expressed through the Spatial Susceptibility Index (SSi. Parameters of physical vulnerability, economic importance and visitors density examine the temporal vulnerability of the sites expressed through the Temporal Vulnerability Index (TVi. The equally weighted sum of the spatial and temporal indexes represents the total Archaeological Site Vulnerability Index (A.S.V.I.. The A.S.V.I method is applied at 16 archaeological sites across Greece, allowing an assessment of their vulnerability. This then allows the establishment of a regional and national priority list for considering future risk mitigation. Results indicate that i the majority of the sites have low to moderate vulnerability to earthquake hazard, ii Neratzia Fortress on Kos and Heraion on Samos are characterised as highly vulnerable and should be prioritised for further studies and mitigation measures, and iii the majority of the sites are susceptible to at least one Earthquake Environmental Effect and present relatively high physical vulnerability attributed to the existing limited conservation works. This approach highlights the necessity for an effective vulnerability assessment methodology within the existing framework of disaster risk management for cultural heritage.

Stability-Indicating HPTLC Method for Simultaneous Estimation of Flurbiprofen and Chloramphenicol in Ophthalmic Solution.

Science.gov (United States)

Sadakwala, Vaishnavi M; Chauhan, Renu S; Shah, Shailesh A; Shah, Dinesh R

2016-01-01

A specific, accurate and reproducible stability-indicating high performance thin layer chromatography (HPTLC) method was developed for the estimation of flurbiprofen and chloramphenicol in the presence of their degradation products. Degradation studies of both the drugs were carried out in acidic, alkaline, neutral, oxidative, photolytic and thermal stress conditions. Separation was performed on thin layer chromatography plate precoated with silica gel 60 F254 using ethyl acetate : n-hexane : methanol : tri-ethyl amine (5 : 4 : 2 : 0.5, v/v/v/v). Spots at retention factor 0.29 and 0.62 were recognized as flurbiprofen and chloramphenicol, respectively, and were quantified through densitometric measurements at wavelength 267 nm. Method was found to be linear over the concentration range 12-60 ng/spot with correlation coefficient of 0.9997 for flurbiprofen and 200-1,000 ng/spot with correlation coefficient of 0.9977 for chloramphenicol. The proposed method was applied to the estimation of flurbiprofen and chloramphenicol in commercial ophthalmic formulation. The developed HPTLC method can be applied for routine analysis of flurbiprofen and chloramphenicol in the presence of their degradation products in their individual as well as combined pharmaceutical formulations. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Modarres, M.; Wrethall, J.; Appignani, P.L.

1989-01-01

This paper describes the results of an evaluation of maintenance-related programmatic performance indicators, and summarizes the direction being taken in a new project to integrate indirect performance indicators for nuclear power plants. Programmatic indicators allow NRC to monitor, at a distance, trends in functional activities before a significant impact appears on safety. Previously presented work described the selection of candidate performance indicators associated with maintenance for continued analysis. This evaluation focused on two aspects of the selected indicators: (1) an evaluation of the state of maintenance programs in the narrative text of SALP reports versus the frequencies of inadvertent ESF actuations from test and maintenance errors; and (2) an evaluation of alternative methods for analyzing the thermal performance of plants as an integral indicator of maintenance program effectiveness. 1 ref., 1 fig

Long-term results of forearm lengthening and deformity correction by the Ilizarov method.

Science.gov (United States)

Orzechowski, Wiktor; Morasiewicz, Leszek; Krawczyk, Artur; Dragan, Szymon; Czapiński, Jacek

2002-06-30

Background. Shortening and deformity of the forearm is most frequently caused by congenital disorders or posttraumatic injury. Given its complex anatomy and biomechanics, the forearm is clearly the most difficult segment for lengthening and deformity correction. Material and methods. We analyzed 16 patients with shortening and deformity of the forearm, treated surgically, using the Ilizarov method in our Department from 1989 to 2001. in 9 cases 1-stage surgery was sufficient, while the remaining 7 patients underwent 2-5 stages of treatment. At total of 31 surgical operations were performed. The extent of forearm shortening ranged from 1,5 to 14,5 cm (5-70%). We development a new fixator based on Schanz half-pins. Results. The length of forearm lengthening per operative stage averaged 2,35 cm. the proportion of lengthening ranged from 6% to 48% with an average of 18,3%. The mean lengthening index was 48,15 days/cm. the per-patient rate of complications was 88% compared 45% per stage of treatment, mostly limited rotational mobility and abnormal consolidation of regenerated bone. Conclusions. Despite the high complication rate, the Ilizarov method is the method of choice for patients with forearm shortenings and deformities. Treatment is particularly indicated in patients with shortening caused by disproportionate length of the ulnar and forearm bones. Treatment should be managed so as cause the least possible damage to arm function, even at the cost of limited lengthening. Our new stabilizer based on Schanz half-pins makes it possible to preserve forearm rotation.

The anchors of steel wire ropes, testing methods and their results

Directory of Open Access Journals (Sweden)

J. Krešák

2012-10-01

Full Text Available The present paper introduces an application of the acoustic and thermographic method in the defectoscopic testing of immobile steel wire ropes at the most critical point, the anchor. First measurements and their results by these new defectoscopic methods are shown. In defectoscopic tests at the anchor, the widely used magnetic method gives unreliable results, and therefore presents a problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enable increased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions.

Design of energy management indicator.

Directory of Open Access Journals (Sweden)

Ernesto Tomás Dalmau García

2010-10-01

Full Text Available This work has as a main goal to demostrate the viability of the energy management indicator, that will be a part of the Balanced Scorecard in the organization and the own process of calculation allows to obtain a Balanced Scorecard of energy management. It describes the executive order of the actions that have to be done to reach to the mentioned indicator, based on the selection of the selected period of time; the types of power carriers, the weight of each carrier in the structure of the consumption and the activities where they are used. With these elements several tools are used to reach to the expected results, as the bar charts, comparative tables and indices of power intensity. The indices of energy intensity are recommended as comparative elements for the contribution to the operativity and information level, meaning that not always is necessary to tie them , if not, in some cases, may be other selected indicators that may result as qualitatives type, The Cuban enterprise system uses the model Control of Consumption and Catchment Demand of fuels and lubricants (CDA 002 of the Ministry of Economy and Planning (MEP that is used in the work and it is recommended for the organizations who apply it. The study and application of this method were made in the Company of Raw materials Recovery in an experimental form.

Next-generation sequencing indicates false-positive MRD results and better predicts prognosis after SCT in patients with childhood ALL.

Science.gov (United States)

Kotrova, M; van der Velden, V H J; van Dongen, J J M; Formankova, R; Sedlacek, P; Brüggemann, M; Zuna, J; Stary, J; Trka, J; Fronkova, E

2017-07-01

Minimal residual disease (MRD) monitoring via quantitative PCR (qPCR) detection of Ag receptor gene rearrangements has been the most sensitive method for predicting prognosis and making post-transplant treatment decisions for patients with ALL. Despite the broad clinical usefulness and standardization of this method, we and others have repeatedly reported the possibility of false-positive MRD results caused by massive B-lymphocyte regeneration after stem cell transplantation (SCT). Next-generation sequencing (NGS) enables precise and sensitive detection of multiple Ag receptor rearrangements, thus providing a more specific readout compared to qPCR. We investigated two cohorts of children with ALL who underwent SCT (30 patients and 228 samples). The first cohort consisted of 17 patients who remained in long-term CR after SCT despite having low MRD positivity (SCT monitoring using qPCR. Only one of 27 qPCR-positive samples was confirmed to be positive by NGS. Conversely, 10 of 15 samples with low qPCR-detected MRD positivity from 13 patients who subsequently relapsed were also confirmed to be positive by NGS (P=0.002). These data show that NGS has a better specificity in post-SCT ALL management and indicate that treatment interventions aimed at reverting impending relapse should not be based on qPCR only.

Diversity Indices as Measures of Functional Annotation Methods in Metagenomics Studies

KAUST Repository

Jankovic, Boris R.

2016-01-26

Applications of high-throughput techniques in metagenomics studies produce massive amounts of data. Fragments of genomic, transcriptomic and proteomic molecules are all found in metagenomics samples. Laborious and meticulous effort in sequencing and functional annotation are then required to, amongst other objectives, reconstruct a taxonomic map of the environment that metagenomics samples were taken from. In addition to computational challenges faced by metagenomics studies, the analysis is further complicated by the presence of contaminants in the samples, potentially resulting in skewed taxonomic analysis. The functional annotation in metagenomics can utilize all available omics data and therefore different methods that are associated with a particular type of data. For example, protein-coding DNA, non-coding RNA or ribosomal RNA data can be used in such an analysis. These methods would have their advantages and disadvantages and the question of comparison among them naturally arises. There are several criteria that can be used when performing such a comparison. Loosely speaking, methods can be evaluated in terms of computational complexity or in terms of the expected biological accuracy. We propose that the concept of diversity that is used in the ecosystems and species diversity studies can be successfully used in evaluating certain aspects of the methods employed in metagenomics studies. We show that when applying the concept of Hill’s diversity, the analysis of variations in the diversity order provides valuable clues into the robustness of methods used in the taxonomical analysis.

Influence of PET/CT-introduction on PET scanning frequency and indications. Results of a multicenter study

International Nuclear Information System (INIS)

Stergar, H.; Bockisch, A.; Eschmann, S.M.; Krause, B.J.; Roedel, R.; Tiling, R.; Weckesser, M.

2007-01-01

Aim: to evaluate the influence of the introduction of combined PET/CT scanners into clinical routine. This investigation addresses the quantitative changes between PET/CT and stand alone PET. Methods: the study included all examinations performed on stand alone PET- or PET/CT-scanners within 12 month prior to and after implementation of PET/CT. The final data analysis included five university hospitals and a total number of 15 497 exams. We distinguished exams on stand alone tomographs prior to and after installation of the combined device as well as PET/CT scans particularly with regard to disease entities. Various further parameters were investigated. Results: the overall number of PET scans (PET and PET/CT) rose by 146% while the number of scans performed on stand alone scanners declined by 22%. Only one site registered an increase in stand alone PET. The number of exams for staging in oncology increased by 196% while that of cardiac scans decreased by 35% and the number of scans in neurology rose by 47%. The use of scans for radiotherapy planning increased to 7% of all PET/CT studies. The increase of procedures for so-called classic PET oncology indications was moderate compared to the more common tumors. An even greater increase was observed in some rare entities. Conclusions: the introduction of PET/CT led to more than a doubling of overall PET procedures with a main focus on oncology. Some of the observed changes in scanning frequency may be caused by a rising availability of new radiotracers and advancements of competing imaging methods. Nevertheless the evident increase in the use of PET/CT for the most common tumour types demonstrates its expanding role in cancer staging. The combination of molecular and morphologic imaging has not only found its place but is still gaining greater importance with new developments in technology and radiochemistry. (orig.)

Development and validation of a stability-indicating RP–HPLC method for estimation of atazanavir sulfate in bulk

Directory of Open Access Journals (Sweden)

S. Dey

2017-04-01

Full Text Available A stability-indicating reverse phase–high performance liquid chromatography (RP–HPLC method was developed and validated for the determination of atazanavir sulfate in tablet dosage forms using C18 column Phenomenix (250 mm×4.6 mm, 5 μm with a mobile phase consisting of 900 mL of HPLC grade methanol and 100 mL of water of HPLC grade. The pH was adjusted to 3.55 with acetic acid. The mobile phase was sonicated for 10 min and filtered through a 0.45 μm membrane filter at a flow rate of 0.5 mL/min. The detection was carried out at 249 nm and retention time of atazanavir sulfate was found to be 8.323 min. Linearity was observed from 10 to 90 μg/mL (coefficient of determination R2 was 0.999 with equation, y=23.427x+37.732. Atazanavir sulfate was subjected to stress conditions including acidic, alkaline, oxidation, photolysis and thermal degradation, and the results showed that it was more sensitive towards acidic degradation. The method was validated as per ICH guidelines.

Qualitative indices and enhancement rate of CT pulmonary angiography in patients with suspected pulmonary embolism: Comparison between test bolus and bolus-tracking methods

Directory of Open Access Journals (Sweden)

Maryam Moradi

2016-01-01

Full Text Available Background: The aim of the present study was to assess the qualitative indices and enhancement rate of computed tomographic pulmonary angiography (CTPA in patients with suspected pulmonary embolism using Test bolus and Bolus-tracking techniques. Materials and Methods: Fifty-two patients with suspected pulmonary embolism that passed informed consent were randomly divided in the two groups. In each group, demographic characteristics, qualitative indices, and enhancement rate of CTPA were recorded. Results: The diagnostic result obtained in majority of the participants in the two groups (88.5 % in Test bolus group vs. 73.1% in the Bolus tracking group. In the case of quantitative variables, no statistically significant differences were found between the groups (P > 0.05. The only statistically significant difference between the two groups is average of "X-ray dose". Conclusion: The results of our study show that there is no statistically significant difference between the Bolus Tracking and Test Bolus techniques for producing more homogeneous enhancement.

Validated stability-indicating spectrofluorimetric methods for the determination of ebastine in pharmaceutical preparations

Directory of Open Access Journals (Sweden)

Eid Manal

2011-03-01

Full Text Available Abstract Two sensitive, selective, economic, and validated spectrofluorimetric methods were developed for the determination of ebastine (EBS in pharmaceutical preparations depending on reaction with its tertiary amino group. Method I involves condensation of the drug with mixed anhydrides (citric and acetic anhydrides producing a product with intense fluorescence, which was measured at 496 nm after excitation at 388 nm. Method (IIA describes quantitative fluorescence quenching of eosin upon addition of the studied drug where the decrease in the fluorescence intensity was directly proportional to the concentration of ebastine; the fluorescence quenching was measured at 553 nm after excitation at 457 nm. This method was extended to (Method IIB to apply first and second derivative synchronous spectrofluorimetric method (FDSFS & SDSFS for the simultaneous analysis of EBS in presence of its alkaline, acidic, and UV degradation products. The proposed methods were successfully applied for the determination of the studied compound in its dosage forms. The results obtained were in good agreement with those obtained by a comparison method. Both methods were utilized to investigate the kinetics of the degradation of the drug.

Analysis of Indicators of Corporate Responsibility in Road Freight Transport: Results of Transport Companies and FMCG Retailers in Serbia

Directory of Open Access Journals (Sweden)

Dragan Đuranović

2016-12-01

Full Text Available The aim of this paper is the analysis of indicators of corporate responsibility in road freight transport, with special emphasis on freight transport and delivery to Fast Moving Consumers Goods (FMCG retailers and final consumer. The main task is to rank the importance of corporate responsibility indicators in freight transport from the perspective of the management of transport companies, as well as management of retail stores. In this context, empirical research was conducted on a sample of 124 managers of transport enterprises and 181 managers of FMCG retailers in Serbia. The results showed that the impact of indicators does not depend on the region, transport company and retail store. The indicators show a statistically significant dependence on FMCG type that is being transported. The conducted analysis and achieved results are important in practice as they show to the management of transport companies which indicators should be developed, so that customers (retailers, and thus the users of final products are satisfied. Disadvantages of the existing research and suggestions for future studies are provided in the paper.

Methods and introductory results of the Greek national health and nutrition survey - HYDRIA

Directory of Open Access Journals (Sweden)

Georgia Martimianaki

2018-06-01

Full Text Available Background:  According to a large prospective cohort study (with baseline examination in the 1990s and smaller studies that followed, the population in Greece has been gradually deprived of the favorable morbidity and mortality indices recorded in the 1960s. The HYDRIA survey conducted in 2013-14 is the first nationally representative survey, which collected data related to the health and nutrition of the population in Greece. Methods: The survey sample consists of 4011 males (47% and females aged 18 years and over. Data collection included interviewer-administered questionnaires on personal characteristics, lifestyle choices, dietary habits and medical history; measurements of somatometry and blood pressure; and, blood drawing. Weighting factors were applied to ensure national representativeness of results. Results: Three out of five adults in Greece reported suffering of a chronic disease, with diabetes mellitus and chronic depression being the more frequent ones among older individuals. The population is also experiencing an overweight/obesity epidemic, since seven out of 10 adults are either overweight or obese. In addition, 40% of the population bears indications of hypertension. Smoking is still common and among women the prevalence was higher in younger age groups. Social disparities were observed in the prevalence of chronic diseases and mortality risk factors (hypertension, obesity, impaired lipid profile and high blood glucose levels. Conclusion: Excess body weight, hypertension, the smoking habit and the population’s limited physical activity are the predominant challenges that public health officials have to deal with in formulating policies and designing actions for the population in Greece.

Cross-sectional prospective survey to study indication-based usage of antimicrobials in animals: results of use in cattle.

Science.gov (United States)

Thomson, Katariina; Rantala, Merja; Hautala, Maria; Pyörälä, Satu; Kaartinen, Liisa

2008-04-14

Indication-based data on the use of antimicrobials in animals were collected using a prospective cross-sectional survey, similarly as for surveys carried out in human medicine, but adapting the questionnaire to include veterinary-specific issues. The participating veterinarians were randomly selected from a sample population of practising veterinarians. The sampling was stratified to take into account the proportions of different types of veterinary practice in the country. All patients consulting the veterinary practice during a 1-week period were included in the study and veterinarians returned a completed questionnaire for each patient receiving antimicrobial treatment. As cattle received most of the treatments, results from the survey are given using cattle as an example species. The survey was sent to 681 veterinarians, of whom 262 (39%) responded. In total 2850 questionnaires were completed. The largest quantities of antimicrobials, measured in kilograms, were used for cattle, followed by pigs, dogs and horses. The species that were treated most were cattle (n = 1308), dogs (n = 989) and cats (n = 311). For cattle, the most common reason for treatment was acute mastitis (52%), followed by dry-cow therapy (21%), subclinical mastitis (6%) and treatment for acute enteritis (4%). The remaining treatments covered 17% of cattle patients and 15 different indications. For acute mastitis, parenteral or intramammary treatment was used in 36% and 34% of the cases, respectively. The remaining 30% received both treatments simultaneously. Of the parenteral treatments (n = 459), benzyl penicillin was used in 83% of the treated animals (n = 379), while fluoroquinolones were used in 49 cases (11%). Of the 433 cows receiving intramammary treatment, ampicillin combined with cloxacillin was most commonly used (n = 157; 36%), followed by cephalexin+streptomycin (n = 113; 26%). This cross-sectional prospective survey provided a useful method for the collection of information on

Translaminar screw fixation in the lumbar spine: technique, indications, results

OpenAIRE

Grob, D.; Humke, T.

1998-01-01

Translaminar screw fixation of the lumbar spine represents a simple and effective technique for short segment fusion in the degenerative spine. Clinical experience with 173 patients who underwent translaminar screw fixation revealed a fusion rate of 94%. The indications for translaminar screw fixation as a primary fixation procedure are: segmental dysfunction, lumbar spinal stenosis with painful degenerative changes, segmental revision surgery after discectomies, and painful disc-related synd...

Mechanics of Nanostructures: Methods and Results

Science.gov (United States)

Ruoff, Rod

2003-03-01

We continue to develop and use new tools to measure the mechanics and electromechanics of nanostructures. Here we discuss: (a) methods for making nanoclamps and the resulting: nanoclamp geometry, chemical composition and type of chemical bonding, and nanoclamp strength (effectiveness as a nanoclamp for the mechanics measurements to be made); (b) mechanics of carbon nanocoils. We have received carbon nanocoils from colleagues in Japan [1], measured their spring constants, and have observed extensions exceeding 100% relative to the unloaded length, using our scanning electron microscope nanomanipulator tool; (c) several new devices that are essentially MEMS-based, that allow for improved measurements of the mechanics of psuedo-1D and planar nanostructures. [1] Zhang M., Nakayama Y., Pan L., Japanese J. Appl. Phys. 39, L1242-L1244 (2000).

The Use of Data Mining Methods to Predict the Result of Infertility Treatment Using the IVF ET Method

Directory of Open Access Journals (Sweden)

Malinowski Paweł

2014-12-01

Full Text Available The IVF ET method is a scientifically recognized infertility treat- ment method. The problem, however, is this method’s unsatisfactory efficiency. This calls for a more thorough analysis of the information available in the treat- ment process, in order to detect the factors that have an effect on the results, as well as to effectively predict result of treatment. Classical statistical methods have proven to be inadequate in this issue. Only the use of modern methods of data mining gives hope for a more effective analysis of the collected data. This work provides an overview of the new methods used for the analysis of data on infertility treatment, and formulates a proposal for further directions for research into increasing the efficiency of the predicted result of the treatment process.

Results and interpretation of spectral indices measurements made with AQUILON; Resultats et interpretation de mesures d'indices de spectre dans aquilon

Energy Technology Data Exchange (ETDEWEB)

Frichet, J P; Mougey, J N; Naudet, R; Taste, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

This report deals with a set of spectral indices measurements made in the heavy water reactor Aquilon on lattices constituted by massive fuel elements of dia. 29,2 mm. The fuel elements were made either of natural uranium or of slightly depleted or slightly enriched uranium, or of an uranium-plutonium alloy. The measurements were carried out for various lattice pitches (square pitch from 110 to 210 mm) and in certain cases for various temperatures (from 20 to 80 deg. C). The results are compared to calculated values obtained by using the latest advances of the thermalization theory developed at Saclay applied to the moderation by heavy water. (authors) [French] Ce rapport est consacre a un ensemble de mesures d'indices de spectre realisees dans la pile a eau lourde Aquilon sur des reseaux d'elements combustibles pleins, de 29,2 mm de diametre. Ces combustibles se composaient ou bien d'uranium naturel, ou bien d'uranium tres legerement appauvri ou enrichi, ou bien d'un alliage uranium plutonium. Les mesures ont ete effectuees pour toute une serie de pas de reseaux (pas carre 110 a 210 mm), certaines d'entre elles a plusieurs temperatures (20 a 80 deg. C). Les resultats des mesures sont compares a des valeurs calculees obtenues en utilisant les plus recents developpements de la theorie de la thermalisation mise au point a Saclay, appliques au cas de la moderation par l'eau lourde. (auteurs)

Two different hematocrit detection methods: Different methods, different results?

Directory of Open Access Journals (Sweden)

Schuepbach Reto A

2010-03-01

Full Text Available Abstract Background Less is known about the influence of hematocrit detection methodology on transfusion triggers. Therefore, the aim of the present study was to compare two different hematocrit-assessing methods. In a total of 50 critically ill patients hematocrit was analyzed using (1 blood gas analyzer (ABLflex 800 and (2 the central laboratory method (ADVIA® 2120 and compared. Findings Bland-Altman analysis for repeated measurements showed a good correlation with a bias of +1.39% and 2 SD of ± 3.12%. The 24%-hematocrit-group showed a correlation of r2 = 0.87. With a kappa of 0.56, 22.7% of the cases would have been transfused differently. In the-28%-hematocrit group with a similar correlation (r2 = 0.8 and a kappa of 0.58, 21% of the cases would have been transfused differently. Conclusions Despite a good agreement between the two methods used to determine hematocrit in clinical routine, the calculated difference of 1.4% might substantially influence transfusion triggers depending on the employed method.

A rapid quantification method for the screening indicator for β-thalassemia with near-infrared spectroscopy

Science.gov (United States)

Chen, Jiemei; Peng, Lijun; Han, Yun; Yao, Lijun; Zhang, Jing; Pan, Tao

2018-03-01

Near-infrared (NIR) spectroscopy combined with chemometrics was applied to rapidly analyse haemoglobin A2 (HbA2) for β-thalassemia screening in human haemolysate samples. The relative content indicator HbA2 was indirectly quantified by simultaneous analysis of two absolute content indicators (Hb and Hb • HbA2). According to the comprehensive prediction effect of the multiple partitioning of calibration and prediction sets, the parameters were optimized to achieve modelling stability, and the preferred models were validated using the samples not involved in modelling. Savitzky-Golay smoothing was firstly used for the spectral pretreatment. The absorbance optimization partial least squares (AO-PLS) was used to eliminate high-absorption wave-bands appropriately. The equidistant combination PLS (EC-PLS) was further used to optimize wavelength models. The selected optimal models were I = 856 nm, N = 16, G = 1 and F = 6 for Hb and I = 988 nm, N = 12, G = 2 and F = 5 for Hb • HbA2. Through independent validation, the root-mean-square errors and correlation coefficients for prediction (RMSEP, RP) were 3.50 g L- 1 and 0.977 for Hb and 0.38 g L- 1 and 0.917 for Hb • HbA2, respectively. The predicted values of relative percentage HbA2 were further calculated, and the calculated RMSEP and RP were 0.31% and 0.965, respectively. The sensitivity and specificity for β-thalassemia both reached 100%. Therefore, the prediction of HbA2 achieved high accuracy for distinguishing β-thalassemia. The local optimal models for single parameter and the optimal equivalent model sets were proposed, providing more models to match possible constraints in practical applications. The NIR analysis method for the screening indicator of β-thalassemia was successfully established. The proposed method was rapid, simple and promising for thalassemia screening in a large population.

Development of generic quality indicators for patient-centered cancer care by using a RAND modified Delphi method

NARCIS (Netherlands)

Uphoff, Eleonora P. M. M.; Wennekes, Lianne; Punt, Cornelis J. A.; Grol, Richard P. T. M.; Wollersheim, Hub C. H.; Hermens, Rosella P. M. G.; Ottevanger, Petronella B.

2012-01-01

Despite growing attention to patient-centered care, the needs of cancer patients are not always met. Using a RAND modified Delphi method, this study aimed to systematically develop evidence-based indicators, to be used to measure the quality of patient-centered cancer care as a first step toward

Aircraft Engine Gas Path Diagnostic Methods: Public Benchmarking Results

Science.gov (United States)

Simon, Donald L.; Borguet, Sebastien; Leonard, Olivier; Zhang, Xiaodong (Frank)

2013-01-01

Recent technology reviews have identified the need for objective assessments of aircraft engine health management (EHM) technologies. To help address this issue, a gas path diagnostic benchmark problem has been created and made publicly available. This software tool, referred to as the Propulsion Diagnostic Method Evaluation Strategy (ProDiMES), has been constructed based on feedback provided by the aircraft EHM community. It provides a standard benchmark problem enabling users to develop, evaluate and compare diagnostic methods. This paper will present an overview of ProDiMES along with a description of four gas path diagnostic methods developed and applied to the problem. These methods, which include analytical and empirical diagnostic techniques, will be described and associated blind-test-case metric results will be presented and compared. Lessons learned along with recommendations for improving the public benchmarking processes will also be presented and discussed.

Risk-based safety indicators

International Nuclear Information System (INIS)

Sedlak, J.

2001-12-01

The report is structured as follows: 1. Risk-based safety indicators: Typology of risk-based indicators (RBIs); Tools for defining RBIs; Requirements for the PSA model; Data sources for RBIs; Types of risks monitored; RBIs and operational safety indicators; Feedback from operating experience; PSO model modification for RBIs; RBI categorization; RBI assessment; RBI applications; Suitable RBI applications. 2. Proposal for risk-based indicators: Acquiring information from operational experience; Method of acquiring safety relevance coefficients for the systems from a PSA model; Indicator definitions; On-line indicators. 3. Annex: Application of RBIs worldwide. (P.A.)

Sustainability: criteria and indicators for the energy area

International Nuclear Information System (INIS)

Walter, F.; Gubler, F.; Brodmann, U.

2001-01-01

This report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made on the concept of sustainability with reference to the energy area. The importance of energy topics in the fundamental ideas behind sustainability - ecological compatibility, economic efficiency and social fairness - is discussed. The methods used to define the criteria and indicators for sustainability are discussed on the basis of existing systems. >From these, criteria and indicators are proposed for the energy area, including indicators for the influence of energy on the environment, economy and society, activity-indicators and indicators for energy efficiency and politics. The system boundaries for the indicators are discussed, as are grey energy and other 'grey' effects in the environmental, economic and social areas. The various criteria, indicators and the effort needed to collect data on them are presented in table form. The report is completed with a discussion of recommendations on what is still to be done in the area, how the results of the study can be used and what actions are still to be taken

CT of the lesser pelvis - normal and abnormal anatomy, indications, results

International Nuclear Information System (INIS)

Steinbrich, W.; Friedmann, G.

1981-01-01

385 abnormal computer tomograms of the organs in the lesser pelvis were analysed; the normal anatomy, indications for CT and its value are discussed. Particular attention is paid to the relevance of the computer tomographic information for treatment. (orig.) [de

Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

Energy Technology Data Exchange (ETDEWEB)

Conrad, F.; Tonn, B.

1999-05-01

This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

Test-methods of chemical analysis with visual and scanner indication in ecoanalytical monitoring of nature reservoirs of Kirovograd region

Directory of Open Access Journals (Sweden)

Y. V. Bokhan

2007-03-01

Full Text Available The features of test analysis with visual and scanner indication for the exposure and semiquantitative determination of general pollutants and indices of water bodies’ quality are considered. Evaluation of some metrological descriptions of the known test-methods of pH determination, concentrations of the dissolved oxygen, nitrate- and phosphate-ions, ions of iron with visual and computer scanner-technologies using is offered.

How teams use indicators for quality improvement - a multiple-case study on the use of multiple indicators in multidisciplinary breast cancer teams.

Science.gov (United States)

Gort, Marjan; Broekhuis, Manda; Regts, Gerdien

2013-11-01

A crucial issue in healthcare is how multidisciplinary teams can use indicators for quality improvement. Such teams have increasingly become the core component in both care delivery and in many quality improvement methods. This study aims to investigate the relationships between (1) team factors and the way multidisciplinary teams use indicators for quality improvement, and (2) both team and process factors and the intended results. An in-depth, multiple-case study was conducted in the Netherlands in 2008 involving four breast cancer teams using six structure, process and outcome indicators. The results indicated that the process of using indicators involves several stages and activities. Two teams applied a more intensive, active and interactive approach as they passed through these stages. These teams were perceived to have achieved good results through indicator use compared to the other two teams who applied a simple control approach. All teams experienced some difficulty in integrating the new formal control structure, i.e. measuring and managing performance, in their operational task, and in using their 'new' managerial task to decide as a team what and how to improve. Our findings indicate the presence of a network of relationships between team factors, the controllability and actionability of indicators, the indicator-use process, and the intended results. Copyright © 2013. Published by Elsevier Ltd.

Utilization of natural indicators for borax identification in the Indonesian tofu

Science.gov (United States)

Purbaningtias, Tri Esti; Lestari, Intan Dwi; Wiyantoko, Bayu; Kurniawati, Puji; Sriadryani, Devi

2017-03-01

Borax has been found in food products i.e. on the Indonesian Tofu that is often consumed by people. Generally, the identification of borax in food products hard to do by the public. Indicators of natural materials will allow the public to identify the presence of borax in food easier. Qualitative test for borax on Indonesian Tofu showed purple cabbage and sappanwood are the effective natural indicators. The result of determining borax on Indonesian Tofu indicated natural indicator from purple cabbage had the smallest correction factor (with conventional indicators PP) about 4.8%. The results of the validation method for purple cabbage indicator in acid-base titration showed that the purple cabbage indicator is homogenous but unstable. The natural indicators of purple cabbage could not be used again after three days of extraction time based on the results of control chart.

Indication for pharmacological treatment is often lacking

DEFF Research Database (Denmark)

Skoog, Jessica; Midlöv, Patrik; Beckman, Anders

2015-01-01

depending on gender, age, multimorbidity level and income were calculated. RESULTS: On average 45.1 % (range 12.9 % - 75.8 %) of the patients' prescribed drugs had indication. Proton pump inhibitors were associated with the lowest level of indication (12.9 %) and digoxin was associated with the highest......, if there are any differences in indication for treatment depending on gender, age, level of multimorbidity and income. METHOD: Data were collected on individuals aged 65 years or older in Östergötland County in Sweden. To estimate the individual level of multimorbidity the Johns Hopkins ACG Case-Mix System...... level of indication for treatment (75.8 %). Patients aged 80 years or older had the lowest odds ratios of having indication for treatment. CONCLUSION: On average, there was indication for treatment in less than half of the prescription drugs studied. The quality was highest in relation to multimorbidity...

Results from the Application of Uncertainty Methods in the CSNI Uncertainty Methods Study (UMS)

International Nuclear Information System (INIS)

Glaeser, H.

2008-01-01

Within licensing procedures there is the incentive to replace the conservative requirements for code application by a - best estimate - concept supplemented by an uncertainty analysis to account for predictive uncertainties of code results. Methods have been developed to quantify these uncertainties. The Uncertainty Methods Study (UMS) Group, following a mandate from CSNI, has compared five methods for calculating the uncertainty in the predictions of advanced -best estimate- thermal-hydraulic codes. Most of the methods identify and combine input uncertainties. The major differences between the predictions of the methods came from the choice of uncertain parameters and the quantification of the input uncertainties, i.e. the wideness of the uncertainty ranges. Therefore, suitable experimental and analytical information has to be selected to specify these uncertainty ranges or distributions. After the closure of the Uncertainty Method Study (UMS) and after the report was issued comparison calculations of experiment LSTF-SB-CL-18 were performed by University of Pisa using different versions of the RELAP 5 code. It turned out that the version used by two of the participants calculated a 170 K higher peak clad temperature compared with other versions using the same input deck. This may contribute to the differences of the upper limit of the uncertainty ranges.

Dynamic determination of kinetic parameters for the interaction between polypeptide hormones and cell-surface receptors in the perfused rat liver by the multiple-indicator dilution method

International Nuclear Information System (INIS)

Sato, H.; Sugiyama, Y.; Sawada, Y.; Iga, T.; Sakamoto, S.; Fuwa, T.; Hanano, M.

1988-01-01

Hepatic elimination of epidermal growth factor (EGF) via receptor-mediated endocytosis was studied by a multiple-indicator dilution method in the isolated perfused rat liver, in which cell polarity and spatial organization are maintained. In this method EGF was given with inulin, an extracellular reference, as a bolus into the portal vein, and dilution curves of both compounds in the hepatic vein effluent were analyzed. Analysis of the dilution curve for EGF, compared with that for somatostatin, which showed no specific binding to isolated liver plasma membranes, resulted as follows: (i) both extraction ratio and distribution volume of 125 I-labeled EGF decreased as the injected amount of unlabeled EGF increased; (ii) the ratio plot of the dilution curve for EGF exhibited an upward straight line initially for a short period of time, whereas the ratio plot of somatostatin gradually decreased. The multiple-indicator dilution method was used for other peptides also. Insulin and glucagon, known to have hepatocyte receptors, behaved similarly to EGF in shape of their ratio plots. The kinetic parameters calculated by this analysis were comparable with reported values obtained by in vitro direct binding measurements at equilibrium using liver homogenates. They conclude that the multiple-indicator dilution method is a good tool for analyzing the dynamics of peptide hormones-cell-surface receptor interaction under a condition in which spatial architecture of the liver is maintained

First ONPE report - French national observatory of fuel poverty. Definitions, indicators, first results and recommendations

International Nuclear Information System (INIS)

Cherel, Didier; Nolay, Pierre; Devaliere, Isolde; Teissier, Olivier; Maresca, Bruno; Guimard, Sebastien; Moisan, Marie; Rousseau, Nicolas; Jouffe, Yves; Poutrel, Severin; Buresi, Sandrine

2014-09-01

This first report from the French national observatory of fuel poverty (ONPE) aims at defining fuel poverty and at characterizing and measuring this phenomenon through indicators and inquiries. An additional dimension concerns the vulnerability linked with everyday mobility which is presented in a separate chapter. The national and local policies against fuel poverty are presented with their results, efficiency and possible improvements. A short glimpse on fuel poverty in Europe is given before the conclusion and recommendations

Identifying novel drug indications through automated reasoning.

Directory of Open Access Journals (Sweden)

Luis Tari

Full Text Available With the large amount of pharmacological and biological knowledge available in literature, finding novel drug indications for existing drugs using in silico approaches has become increasingly feasible. Typical literature-based approaches generate new hypotheses in the form of protein-protein interactions networks by means of linking concepts based on their cooccurrences within abstracts. However, this kind of approaches tends to generate too many hypotheses, and identifying new drug indications from large networks can be a time-consuming process.In this work, we developed a method that acquires the necessary facts from literature and knowledge bases, and identifies new drug indications through automated reasoning. This is achieved by encoding the molecular effects caused by drug-target interactions and links to various diseases and drug mechanism as domain knowledge in AnsProlog, a declarative language that is useful for automated reasoning, including reasoning with incomplete information. Unlike other literature-based approaches, our approach is more fine-grained, especially in identifying indirect relationships for drug indications.To evaluate the capability of our approach in inferring novel drug indications, we applied our method to 943 drugs from DrugBank and asked if any of these drugs have potential anti-cancer activities based on information on their targets and molecular interaction types alone. A total of 507 drugs were found to have the potential to be used for cancer treatments. Among the potential anti-cancer drugs, 67 out of 81 drugs (a recall of 82.7% are indeed known cancer drugs. In addition, 144 out of 289 drugs (a recall of 49.8% are non-cancer drugs that are currently tested in clinical trials for cancer treatments. These results suggest that our method is able to infer drug indications (original or alternative based on their molecular targets and interactions alone and has the potential to discover novel drug indications for

Validated stability-indicating methods for the determination of zafirlukast in the presence of its alkaline hydrolysis degradation product

Directory of Open Access Journals (Sweden)

Amal M. Abou Al Alamein

2012-12-01

Full Text Available Three simple stability-indicating methods for the analysis of Zafirlukast (ZAF in the presence of its alkaline degradation products were developed and validated as per the International Conference on Harmonization (ICH guidelines to evaluate the stability-indicating power of the proposed methods. The developed high-performance liquid chromatographic technique was achieved on ZORBAX–ODS (5 μm, 150 × 4.6 mm, i.d. by isocratic elution with a mixture of acetonitrile/0.05 M phosphate buffer, pH 5.0, (50:50; v/v as a mobile phase at flow rate of 1.0 mL min−1, followed by UV detection at 240 nm. The method could determine ZAF in the range of 2–40 μg mL−1 with a mean percentage recovery of 99.73 ± 0.903. The proposed HPLC method was utilized to investigate the kinetics of alkaline degradation of ZAF. First derivative of the ratio spectra (1DD method was applied to analyze the drug under investigation without any interference from its degradation product with a linearity range of 4–32 μg mL−1 and with a mean percentage recovery of 99.85 ± 0.608. A chemometric method was also developed using the partial least squares (PLS model for selective determination of ZAF in the range of 4–40 μg mL−1, the mean percentage recovery was found to be 100.00 ± 0.336.

Stability-Indicating RP-HPLC Method for Determination of Guanfacine Hydrochloride in Bulk Drugs and in Pharmaceutical Dosage Form

Directory of Open Access Journals (Sweden)

Vinod K. Ahirrao

2011-04-01

Full Text Available A novel stability-indicating RP-HPLC method was developed and validated for quantitative determination of guanfacine hydrochloride in bulk drug and in pharmaceutical dosage form. An isocratic, reversed phase HPLC method was developed to separate the drug from the degradation products, using Apollo, C18 (250mm x 4.6mm, 5µm column with mobile phase of 50mM Ammonium acetate (volatile buffer and acetonitrile (65:35, v/v. UV detection has been done at wavelength 220 nm. The guanfacine hydrochloride was subjected to the stress conditions of hydrolysis (acid, base, oxidation, photolysis and thermal degradation. The stressed samples were analyzed by the proposed method. The analyte peak shape was excellent. The described method shows excellent linearity over a range of 30 – 450 µg/mL. The correlation coefficient for guanfacine hydrochloride was 0.999. The limit of detection for Guanfacine hydrochloride is 0.011 µg/mL and the limit of quantification is 0.038 µg/mL respectively.Degradation was observed for guanfacine hydrochloride in base, thermal and in 30% H2O2 conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from main peak. The percentage recovery of guanfacine hydrochloride was ranged from (99.2% to 100.5% in pharmaceutical dosage form. The developed method was validated with respect to the linearity, accuracy (recovery, precision, specificity and robustness. The forced degradation studies prove the stability indicating power of the method.

German precursor study: methods and results

International Nuclear Information System (INIS)

Hoertner, H.; Frey, W.; von Linden, J.; Reichart, G.

1985-01-01

This study has been prepared by the GRS by contract of the Federal Minister of Interior. The purpose of the study is to show how the application of system-analytic tools and especially of probabilistic methods on the Licensee Event Reports (LERs) and on other operating experience can support a deeper understanding of the safety-related importance of the events reported in reactor operation, the identification of possible weak points, and further conclusions to be drawn from the events. Additionally, the study aimed at a comparison of its results for the severe core damage frequency with those of the German Risk Study as far as this is possible and useful. The German Precursor Study is a plant-specific study. The reference plant is Biblis NPP with its very similar Units A and B, whereby the latter was also the reference plant for the German Risk Study

Reliability and usability of tourism climate indices

Directory of Open Access Journals (Sweden)

Ghislain Dubois

2016-04-01

Full Text Available Abstract Tourism climate indices (TCI are commonly used to describe the climate conditions suitable for tourism activities, from the planning, investment or daily operations perspectives. A substantial amount of research has been carried out, in particular with respect to new indices formulae adapted to specific tourism products, and parameters and their weighting, taking into account surveys on the stated preferences of tourists, especially in terms of comfort. This paper illustrates another field of research, which seeks to better understand the different sources of uncertainty associated with indices. Indeed, slight differences in formula thresholds, variations in computation methods, and also the use of multimodel ensembles create nuances that affect the ways in which indices projections are usually presented. Firstly, we assess the impact of differences in preference surveys on the definition of indices thresholds, in particular for thermal comfort. Secondly, we compare computation methods for France, showing the need to better specify detailed data sources and their use to ensure the comparability of results. Thirdly, using multimodel ensembles for the Mediterranean basin, we assess the uncertainty inherent in long-term projections, which are used in modelling the economic impact of climate change. This paper argues in favour of a more cautious use of tourism comfort indices, with more consideration given to the robustness of data (validation, debiasing, uncertainty assessment, etc. and users’ needs, from the climate services perspective.

Analysis of the indications for routine lumbar puncture and results of ...

African Journals Online (AJOL)

Lumbar puncture (LP) is an important diagnostic tool for investigating neurological conditions/diseases. This study was carried out to compare the indications for lumbar puncture and findings of cerebrospinal fluid examination in children admitted to Muhimbili National Hospital (MNH) in Dar-es-salaam, Tanzania and Kilifi ...

Risk adjustment methods for Home Care Quality Indicators (HCQIs based on the minimum data set for home care

Directory of Open Access Journals (Sweden)

Hirdes John P

2005-01-01

Full Text Available Abstract Background There has been increasing interest in enhancing accountability in health care. As such, several methods have been developed to compare the quality of home care services. These comparisons can be problematic if client populations vary across providers and no adjustment is made to account for these differences. The current paper explores the effects of risk adjustment for a set of home care quality indicators (HCQIs based on the Minimum Data Set for Home Care (MDS-HC. Methods A total of 22 home care providers in Ontario and the Winnipeg Regional Health Authority (WRHA in Manitoba, Canada, gathered data on their clients using the MDS-HC. These assessment data were used to generate HCQIs for each agency and for the two regions. Three types of risk adjustment methods were contrasted: a client covariates only; b client covariates plus an "Agency Intake Profile" (AIP to adjust for ascertainment and selection bias by the agency; and c client covariates plus the intake Case Mix Index (CMI. Results The mean age and gender distribution in the two populations was very similar. Across the 19 risk-adjusted HCQIs, Ontario CCACs had a significantly higher AIP adjustment value for eight HCQIs, indicating a greater propensity to trigger on these quality issues on admission. On average, Ontario had unadjusted rates that were 0.3% higher than the WRHA. Following risk adjustment with the AIP covariate, Ontario rates were, on average, 1.5% lower than the WRHA. In the WRHA, individual agencies were likely to experience a decline in their standing, whereby they were more likely to be ranked among the worst performers following risk adjustment. The opposite was true for sites in Ontario. Conclusions Risk adjustment is essential when comparing quality of care across providers when home care agencies provide services to populations with different characteristics. While such adjustment had a relatively small effect for the two regions, it did

Risk adjustment methods for Home Care Quality Indicators (HCQIs) based on the minimum data set for home care

Science.gov (United States)

Dalby, Dawn M; Hirdes, John P; Fries, Brant E

2005-01-01

Background There has been increasing interest in enhancing accountability in health care. As such, several methods have been developed to compare the quality of home care services. These comparisons can be problematic if client populations vary across providers and no adjustment is made to account for these differences. The current paper explores the effects of risk adjustment for a set of home care quality indicators (HCQIs) based on the Minimum Data Set for Home Care (MDS-HC). Methods A total of 22 home care providers in Ontario and the Winnipeg Regional Health Authority (WRHA) in Manitoba, Canada, gathered data on their clients using the MDS-HC. These assessment data were used to generate HCQIs for each agency and for the two regions. Three types of risk adjustment methods were contrasted: a) client covariates only; b) client covariates plus an "Agency Intake Profile" (AIP) to adjust for ascertainment and selection bias by the agency; and c) client covariates plus the intake Case Mix Index (CMI). Results The mean age and gender distribution in the two populations was very similar. Across the 19 risk-adjusted HCQIs, Ontario CCACs had a significantly higher AIP adjustment value for eight HCQIs, indicating a greater propensity to trigger on these quality issues on admission. On average, Ontario had unadjusted rates that were 0.3% higher than the WRHA. Following risk adjustment with the AIP covariate, Ontario rates were, on average, 1.5% lower than the WRHA. In the WRHA, individual agencies were likely to experience a decline in their standing, whereby they were more likely to be ranked among the worst performers following risk adjustment. The opposite was true for sites in Ontario. Conclusions Risk adjustment is essential when comparing quality of care across providers when home care agencies provide services to populations with different characteristics. While such adjustment had a relatively small effect for the two regions, it did substantially affect the

Numerical proceessing of radioimmunoassay results using logit-log transformation method

International Nuclear Information System (INIS)

Textoris, R.

1983-01-01

The mathematical model and algorithm are described of the numerical processing of the results of a radioimmunoassay by the logit-log transformation method and by linear regression with weight factors. The limiting value of the curve for zero concentration is optimized with regard to the residual sum by the iterative method by multiple repeats of the linear regression. Typical examples are presented of the approximation of calibration curves. The method proved suitable for all hitherto used RIA sets and is well suited for small computers with internal memory of min. 8 Kbyte. (author)

Uncertainty in Odyssee indicators and energy savings. Development of a methodology and first results

Energy Technology Data Exchange (ETDEWEB)

Boonekamp, P.G.M.; Gerdes, J. [ECN Policy Studies, Petten (Netherlands); Faberi, S. [Institute of Studies for the Integration of Systems ISIS, Rome (Italy)

2013-12-15

The ODYSSEE database on energy efficiency indicators (www.odyssee-indicators.org) has been set up to enable the monitoring and evaluation of realised energy efficiency improvements and related energy savings. The database covers the 27 EU countries as well as Norway and Croatia. Energy indicators that relate energy consumption to a physical output (ton of steel), a performance (person-km driven per car) or the number of energy using devices (refrigerators) can show the increase in energy efficiency realised, and the amount of energy saved. By aggregating indicators, Odyssee calculates energy efficiency indices by sector and for the whole economy (so-called ODEX), in order to evaluate overall energy efficiency progress. This work contributes to the growing need for quantitative monitoring and evaluation of the impacts of energy policies and measures, both at the EU and national level, e.g. due to the Energy Service Directive. Because of the central role of Odyssee indicators in policy evaluations it becomes more important to know how reliable the Odyssee figures are, or in other words, what is the uncertainty margin for the indicator values and the related savings. This report presents a first analysis of uncertainty margins in the indicators and savings figures. The work builds on earlier work in the preceding Odyssee project with regard to the quality of input data used in Odyssee.

Inter-observer reliability of animal-based welfare indicators included in the Animal Welfare Indicators welfare assessment protocol for dairy goats.

Science.gov (United States)

Vieira, A; Battini, M; Can, E; Mattiello, S; Stilwell, G

2018-01-08

This study was conducted within the context of the Animal Welfare Indicators (AWIN) project and the underlying scientific motivation for the development of the study was the scarcity of data regarding inter-observer reliability (IOR) of welfare indicators, particularly given the importance of reliability as a further step for developing on-farm welfare assessment protocols. The objective of this study is therefore to evaluate IOR of animal-based indicators (at group and individual-level) of the AWIN welfare assessment protocol (prototype) for dairy goats. In the design of the study, two pairs of observers, one in Portugal and another in Italy, visited 10 farms each and applied the AWIN prototype protocol. Farms in both countries were visited between January and March 2014, and all the observers received the same training before the farm visits were initiated. Data collected during farm visits, and analysed in this study, include group-level and individual-level observations. The results of our study allow us to conclude that most of the group-level indicators presented the highest IOR level ('substantial', 0.85 to 0.99) in both field studies, pointing to a usable set of animal-based welfare indicators that were therefore included in the first level of the final AWIN welfare assessment protocol for dairy goats. Inter-observer reliability of individual-level indicators was lower, but the majority of them still reached 'fair to good' (0.41 to 0.75) and 'excellent' (0.76 to 1) levels. In the paper we explore reasons for the differences found in IOR between the group and individual-level indicators, including how the number of individual-level indicators to be assessed on each animal and the restraining method may have affected the results. Furthermore, we discuss the differences found in the IOR of individual-level indicators in both countries: the Portuguese pair of observers reached a higher level of IOR, when compared with the Italian observers. We argue how the

A Synthetic Indicator of a Company's Level of Intellectual Capital as a Hidden Value

Directory of Open Access Journals (Sweden)

Przemysław Dominiak

2016-01-01

Full Text Available The authors of the paper analyzed 21 common methods of measuring a company's intellectual capital, finding that none of them meet all 6 demands that a model indicator should satisfy. As a result, a new method was developed, which meets the conditions for a model indicator. Using the chosen expert method, a synthetic indicator of a company's level of intellectual capital (WPKI has been determined. The authors of the paper determine the WPKI indicator for public construction companies using the algorithm defining a hidden value. (original abstract

Radon concentration as an indicator of the indoor air quality: development of an efficient measurement method

International Nuclear Information System (INIS)

Roessler, F.A.

2015-01-01

Document available in abstract form only. Full text of publication follows: Energy conservation regulation could lead to a reduction of the air exchange rate and also a degradation of the indoor air quality. Present methods for the estimating the indoor air quality can only be implemented with limitations. This paper presents a method that allows the estimation of the indoor air quality under normal conditions by using natural radon as an indicator. With mathematical models, the progression of the air exchange rate is estimated by using the radon concentration. Furthermore, the progression of individual air pollutants is estimated. Through series of experiments in a measurement chamber, the modelling could be verified. (author)

METHODS AND TECHNIQUES OF PREDICTION OF KEY PERFORMANCE INDICATORS FOR IMPLEMENTATION OF CHANGES IN MAINTENANCE ORGANISATION

Directory of Open Access Journals (Sweden)

Andrzej WIECZOREK

2012-01-01

Full Text Available The article presents the concept of how to assess the future state of the organization in the area of using and maintenance of technical means, basing on the combination of "classic" prognostic model with models ‐ components of the selected computer tools. Presentation of this concept was preceded by the definition and characteristics of maintenance key performance indicators. It also presents a requirements and method of KPIs selection.

Graphite Isotope Ratio Method Development Report: Irradiation Test Demonstration of Uranium as a Low Fluence Indicator

International Nuclear Information System (INIS)

Reid, B.D.; Gerlach, D.C.; Love, E.F.; McNeece, J.P.; Livingston, J.V.; Greenwood, L.R.; Petersen, S.L.; Morgan, W.C.

1999-01-01

This report describes an irradiation test designed to investigate the suitability of uranium as a graphite isotope ratio method (GIRM) low fluence indicator. GIRM is a demonstrated concept that gives a graphite-moderated reactor's lifetime production based on measuring changes in the isotopic ratio of elements known to exist in trace quantities within reactor-grade graphite. Appendix I of this report provides a tutorial on the GIRM concept

RANKING OF COMPANIES ACCORDING TO THE INDICATORS OF CORPORATE SOCIAL RESPONSIBILITY BASED ON SWARA AND ARAS METHODS

Directory of Open Access Journals (Sweden)

Darjan Karabasevic

2016-05-01

Full Text Available Corporate sector and companies have recognized the importance of implementation of strategy of corporate social responsibility in order to increase the company's image and responsibility towards society and the communities where they operate. Multinational companies in their everyday activities and operations pay more attention to sustainable models of corporate social responsibility. The focus of this paper is to identify the indicators of corporate social responsibility and to rank companies according to the indicators. Proposed framework for evaluation and ranking is based on the SWARA and the ARAS methods. The usability and efficiency of the proposed framework is shown on an illustrative example.

Evaluating rehabilitation methods - some practical results from Rum Jungle

International Nuclear Information System (INIS)

Ryan, P.

1987-01-01

Research and analysis of the following aspects of rehabilitation have been conducted at the Rum Jungle mine site over the past three years: drainage structure stability; rock batter stability; soil fauna; tree growth in compacted soils; rehabilitation costs. The results show that, for future rehabilitation projects adopting refined methods, attention to final construction detail and biospheric influences is most important. The mine site offers a unique opportunity to evaluate the success of a variety of rehabilitation methods to the benefit of the industry in Australia overseas. It is intended that practical, economic, research will continue for some considerable time

Life Expectancies Applied to Specific Statuses: a History of the Indicators and the Methods of Calculation {Population, 3, 1998)

OpenAIRE

N. Brouard; J.-M. Robine; E. Cambois

1999-01-01

Cambois (Emmanuelle), Robin? (Jean-Marie), Brouard (Nicolas).- Life Expectancies Applied to Specific Statuses: A History of the Indicators and the Methods of Calculation Indicators of life expectancy applied to specific statuses, such as the state of health or professional status, were introduced at the end of the 1930s and are currently the object of renewed interest. Because they relate mortality to different domains (health, professional activity) applied life expectancies reflect simultan...

The elasticity of substitution of superlative price indices

OpenAIRE

Petter Frenger

2005-01-01

Abstract: The paper presents a method for computing the curvature implicit in the use of superlative price indices. It extends the quadratic lemma and allows us to compute the elasticity of substitution of the underlying preferences in the direction of the observed price change for the Törnqvist and the quadratic mean of order r indices. It derives the expressions for the directional shadow elasticity of substitution and applies the results to the Norwegian CPI data base. Ke...

THE RESULTS OF USING OF INDICATORS OF THE HIGH-TEST CAST IRON OF TYPE ICH STRUCTURE IN CONDITIONS OF PRODUCT

Directory of Open Access Journals (Sweden)

A. L. Majorov

2006-01-01

Full Text Available The results of development of the indicator of highstrength pig-iron are submitted in the report. The indicator using allows to carry out the testing of the pig-iron structure in conditions of manufacture without additional preparation of the casting surface.

Application of Semiempirical Methods to Transition Metal Complexes: Fast Results but Hard-to-Predict Accuracy.

KAUST Repository

Minenkov, Yury; Sharapa, Dmitry I.; Cavallo, Luigi

2018-01-01

-point energy evaluations on density functional theory (DFT) optimized conformers revealed pronounced deviations between semiempirical and DFT methods indicating fundamental difference in potential energy surfaces (PES). To identify the origin of the deviation

Indications for and clinical procedures resulting from magnetic resonance imaging of the knee in older patients

Science.gov (United States)

Parent, Marc-Etienne; Vézina, François; Carrier, Nathalie; Masetto, Ariel

2018-01-01

Abstract Objective To analyze the indications for and clinical procedures resulting from knee magnetic resonance imaging (MRI) in older patients. Design We retrospectively analyzed 215 medical records of patients 50 years of age and older who had undergone a unilateral knee MRI in 2009. Setting Centre hospitalier universitaire de Sherbrooke in Quebec. Participants Patients 50 years of age and older who underwent a knee MRI in 2009. Main outcome measures The main outcome measure was an invasive procedure in the same knee that underwent an MRI. Medical charts were reviewed up to 2014 for patient characteristics, MRI indication, ordering physician specialty, radiography before MRI, MRI findings, and clinical procedures resulting from the MRI. Results The patients’ mean (SD) age was 60.6 (7.5) years. The main MRI indications were meniscopathy (148 [68.8%]) and chronic pain (92 [42.8%]). The main MRI findings were osteoarthritis (OA) (185 [86.0%]) and meniscal lesions (170 [79.1%]). Only 82 (38.1%) patients had a plain radiograph in the 24 months preceding the MRI, usually without a standing anteroposterior view. Findings on pre-MRI radiography (n = 201) demonstrated OA in 144 (71.6%) patients. Overall, 87 (40.5%) patients were seen by an orthopedic surgeon and 27 (31.0%) of these patients underwent an invasive intervention. Among the 81 patients with moderate to severe OA on MRI, 36 (44.4%) had radiographic evidence of moderate to severe OA and only 3 (3.7%) underwent arthroscopic meniscectomy. Conclusion Our study reproduces the known association between OA and degenerative meniscal changes in older patients. We have found a surprising underuse of the standing anteroposterior view on radiography. Most patients in our cohort could have been appropriately diagnosed and treated based on such radiographic information, as demonstrated by pre-MRI findings, thus avoiding the MRI and subsequent evaluation by an orthopedic surgeon. Meniscectomy was rarely performed

Application of the control variate technique to estimation of total sensitivity indices

International Nuclear Information System (INIS)

Kucherenko, S.; Delpuech, B.; Iooss, B.; Tarantola, S.

2015-01-01

Global sensitivity analysis is widely used in many areas of science, biology, sociology and policy planning. The variance-based methods also known as Sobol' sensitivity indices has become the method of choice among practitioners due to its efficiency and ease of interpretation. For complex practical problems, estimation of Sobol' sensitivity indices generally requires a large number of function evaluations to achieve reasonable convergence. To improve the efficiency of the Monte Carlo estimates for the Sobol' total sensitivity indices we apply the control variate reduction technique and develop a new formula for evaluation of total sensitivity indices. Presented results using well known test functions show the efficiency of the developed technique. - Highlights: • We analyse the efficiency of the Monte Carlo estimates of Sobol' sensitivity indices. • The control variate technique is applied for estimation of total sensitivity indices. • We develop a new formula for evaluation of Sobol' total sensitivity indices. • We present test results demonstrating the high efficiency of the developed formula

Convergence results for a class of abstract continuous descent methods

Directory of Open Access Journals (Sweden)

Sergiu Aizicovici

2004-03-01

Full Text Available We study continuous descent methods for the minimization of Lipschitzian functions defined on a general Banach space. We establish convergence theorems for those methods which are generated by approximate solutions to evolution equations governed by regular vector fields. Since the complement of the set of regular vector fields is $sigma$-porous, we conclude that our results apply to most vector fields in the sense of Baire's categories.

Adjustment of nursing home quality indicators

Directory of Open Access Journals (Sweden)

Hirdes John P

2010-04-01

Full Text Available Abstract Background This manuscript describes a method for adjustment of nursing home quality indicators (QIs defined using the Center for Medicaid & Medicare Services (CMS nursing home resident assessment system, the Minimum Data Set (MDS. QIs are intended to characterize quality of care delivered in a facility. Threats to the validity of the measurement of presumed quality of care include baseline resident health and functional status, pattern of comorbidities, and facility case mix. The goal of obtaining a valid facility-level estimate of true quality of care should include adjustment for resident- and facility-level sources of variability. Methods We present a practical and efficient method to achieve risk adjustment using restriction and indirect and direct standardization. We present information on validity by comparing QIs estimated with the new algorithm to one currently used by CMS. Results More than half of the new QIs achieved a "Moderate" validation level. Conclusions Given the comprehensive approach and the positive findings to date, research using the new quality indicators is warranted to provide further evidence of their validity and utility and to encourage their use in quality improvement activities.

Proposal of quality indicators for cardiac rehabilitation after acute coronary syndrome in Japan: a modified Delphi method and practice test.

Science.gov (United States)

Ohtera, Shosuke; Kanazawa, Natsuko; Ozasa, Neiko; Ueshima, Kenji; Nakayama, Takeo

2017-01-27

Cardiac rehabilitation is underused and its quality in practice is unclear. A quality indicator is a measurable element of clinical practice performance. This study aimed to propose a set of quality indicators for cardiac rehabilitation following an acute coronary event in the Japanese population and conduct a small-size practice test to confirm feasibility and applicability of the indicators in real-world clinical practice. This study used a modified Delphi technique (the RAND/UCLA appropriateness method), a consensus method which involves an evidence review, a face-to-face multidisciplinary panel meeting and repeated anonymous rating. Evidence to be reviewed included clinical practice guidelines available in English or Japanese and existing quality indicators. Performance of each indicator was assessed retrospectively using medical records at a university hospital in Japan. 10 professionals in cardiac rehabilitation for the consensus panel. In the literature review, 23 clinical practice guidelines and 16 existing indicators were identified to generate potential indicators. Through the consensus-building process, a total of 30 indicators were assessed and finally 13 indicators were accepted. The practice test (n=39) revealed that 74% of patients underwent cardiac rehabilitation. Median performance of process measures was 93% (IQR 46-100%). 'Communication with the doctor who referred the patient to cardiac rehabilitation' and 'continuous participation in cardiac rehabilitation' had low performance (32% and 38%, respectively). A modified Delphi technique identified a comprehensive set of quality indicators for cardiac rehabilitation. The single-site, small-size practice test confirmed that most of the proposed indicators were measurable in real-world clinical practice. However, some clinical processes which are not covered by national health insurance in Japan had low performance. Further studies will be needed to clarify and improve the quality of care in cardiac

Method of vacuum correlation functions: Results and prospects

International Nuclear Information System (INIS)

Badalian, A. M.; Simonov, Yu. A.; Shevchenko, V. I.

2006-01-01

Basic results obtained within the QCD method of vacuum correlation functions over the past 20 years in the context of investigations into strong-interaction physics at the Institute of Theoretical and Experimental Physics (ITEP, Moscow) are formulated Emphasis is placed primarily on the prospects of the general theory developed within QCD by employing both nonperturbative and perturbative methods. On the basis of ab initio arguments, it is shown that the lowest two field correlation functions play a dominant role in QCD dynamics. A quantitative theory of confinement and deconfinement, as well as of the spectra of light and heavy quarkonia, glueballs, and hybrids, is given in terms of these two correlation functions. Perturbation theory in a nonperturbative vacuum (background perturbation theory) plays a significant role, not possessing drawbacks of conventional perturbation theory and leading to the infrared freezing of the coupling constant α s

On the use of the polarization method of remote indication of oil pollutants on the sea surface under different hydrometerological conditions and at different altitudes of the sun

Energy Technology Data Exchange (ETDEWEB)

Buznikov, A A; Lakhtanov, G A

1980-01-01

Results of experimental investigations of water areas of the Caspian sea with the aid of a specially developed shipboard polarimeter. Interpretation of the remote measurements was carried out by laboratory analysis of the thickness of the oil film and the amount of dissolved oil in samples gathered from the surface of the sea. Analysis of the influence of weather conditions and of the composition of the petroleum products on the results of remote indications made it possible to formulate concrete methodical recommendations for achieving optimum results in remote assessment of oil pollutants of seawater areas. The effectiveness of the polarization method under different hydrometerological conditions makes it possible to regard it as a good supplementation to the traditional visual and instrumental methods of monitoring pollution of bodies of water.

A new nonlinear blind source separation method with chaos indicators for decoupling diagnosis of hybrid failures: A marine propulsion gearbox case with a large speed variation

International Nuclear Information System (INIS)

Li, Zhixiong; Peng, Z

2016-01-01

The normal operation of propulsion gearboxes ensures the ship safety. Chaos indicators could efficiently indicate the state change of the gearboxes. However, accurate detection of gearbox hybrid faults using Chaos indicators is a challenging task and the detection under speed variation conditions is attracting considerable attentions. Literature review suggests that the gearbox vibration is a kind of nonlinear mixture of variant vibration sources and the blind source separation (BSS) is reported to be a promising technique for fault vibration analysis, but very limited work has addressed the nonlinear BSS approach for hybrid faults decoupling diagnosis. Aiming to enhance the fault detection performance of Chaos indicators, this work presents a new nonlinear BSS algorithm for gearbox hybrid faults detection under a speed variation condition. This new method appropriately introduces the kernel spectral regression (KSR) framework into the morphological component analysis (MCA). The original vibration data are projected into the reproducing kernel Hilbert space (RKHS) where the instinct nonlinear structure in the original data can be linearized by KSR. Thus the MCA is able to deal with nonlinear BSS in the KSR space. Reliable hybrid faults decoupling is then achieved by this new nonlinear MCA (NMCA). Subsequently, by calculating the Chaos indicators of the decoupled fault components and comparing them with benchmarks, the hybrid faults can be precisely identified. Two specially designed case studies were implemented to evaluate the proposed NMCA-Chaos method on hybrid gear faults decoupling diagnosis. The performance of the NMCA-Chaos was compared with state of art techniques. The analysis results show high performance of the proposed method on hybrid faults detection in a marine propulsion gearbox with large speed variations.

Stability-Indicating HPLC Method for Simultaneous Determination of Chloramphenicol, Dexamethasone Sodium Phosphate and Tetrahydrozoline Hydrochloride in Ophthalmic Solution.

Science.gov (United States)

AlAani, Hashem; Alnukkary, Yasmin

2016-03-01

A simple stability-indicating RP-HPLC assay method was developed and validated for quantitative determination of Chloramphenicol, Dexamethasone Sodium Phosphate and Tetrahydrozoline Hydrochloride in ophthalmic solution in the presence of 2-amino-1-(4-nitrophenyl)propane-1,3-diol, a degradation product of Chloramphenicol, and Dexamethasone, a degradation product of Dexamethasone Sodium Phosphate. Effective chromatographic separation was achieved using C18 column (250 mm, 4.6 mm i.d., 5 μm) with isocratic mobile phase consisting of acetonitrile - phosphate buffer (pH 4.0; 0.05 M) (30:70, v/v) at a flow rate of 1 mL/minute. The column temperature was maintained at 40°C and the detection wavelength was 230 nm. The proposed HPLC procedure was statistically validated according to the ICH guideline, and was proved to be stability-indicating by resolution of the APIs from their forced degradation products. The developed method is suitable for the routine analysis as well as stability studies.

Indicators for wild animal offtake: methods and case study for African mammals and birds

Directory of Open Access Journals (Sweden)

Daniel J. Ingram

2015-09-01

Full Text Available Unsustainable exploitation of wild animals is one of the greatest threats to biodiversity and to millions of people depending on wild meat for food and income. The international conservation and development community has committed to implementing plans for sustainable use of natural resources and has requested development of monitoring systems of bushmeat offtake and trade. Although offtake monitoring systems and indicators for marine species are more developed, information on harvesting terrestrial species is limited. Building on approaches developed to monitor exploitation of fisheries and population trends, we have proposed two novel indicators for harvested terrestrial species: the mean body mass indicator (MBMI assessing whether hunters are relying increasingly on smaller species over time, as a measure of defaunation, by tracking body mass composition of harvested species within samples across various sites and dates; and the offtake pressure indicator (OPI as a measure of harvesting pressure on groups of wild animals within a region by combining multiple time series of the number of harvested individuals across species. We applied these two indicators to recently compiled data for West and Central African mammals and birds. Our exploratory analyses show that the MBMI of harvested mammals decreased but that of birds rose between 1966/1975 and 2010. For both mammals and birds the OPI increased substantially during the observed time period. Given our results, time-series data and information collated from multiple sources are useful to investigate trends in body mass of hunted species and offtake volumes. In the absence of comprehensive monitoring systems, we suggest that the two indicators developed in our study are adequate proxies of wildlife offtake, which together with additional data can inform conservation policies and actions at regional and global scales.

A validated stability-indicating LC method for the separation of enantiomer and potential impurities of Linezolid using polar organic mode.

Science.gov (United States)

Satyanarayana Raju, T; Vishweshwari Kutty, O; Ganesh, V; Yadagiri Swamy, P

2012-08-01

Although a number of methods are available for evaluating Linezolid and its possible impurities, a common method for separation if its potential impurities, degradants and enantiomer in a single method with good efficiency remain unavailable. With the objective of developing an advanced method with shorter runtimes, a simple, precise, accurate stability-indicating LC method was developed for the determination of purity of Linezolid drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. This method is capable of separating all the related substances of Linezolid along with the chiral impurity. This method can also be used for the estimation of assay of Linezolid in drug substance as well as in drug product. The method was developed using Chiralpak IA (250 mm×4.6 mm, 5 μm) column. A mixture of acetonitrile, ethanol, n-butyl amine and trifluoro acetic acid in 96:4:0.10:0.16 (v/v/v/v) ratio was used as a mobile phase. The eluted compounds were monitored at 254 nm. Linezolid was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, limit of detection, limit of quantification, precision, linearity, accuracy, robustness and system suitability.

Design of environmentally friendly products using indicators

DEFF Research Database (Denmark)

Lenau, Torben Anker; Bey, Niki

2001-01-01

The paper describes the requirements of product designers towards methods for environmental evaluation; it argues that indicators can be used for rough environmental evaluations and it presents experiences made with the indicator-based Oil Point Method (OPM). This method is illustrated by means...

Stability-indicating HPLC-DAD methods for determination of two binary mixtures: Rabeprazole sodium-mosapride citrate and rabeprazole sodium-itopride hydrochloride.

Science.gov (United States)

El-Fatatry, Hamed M; Mabrouk, Mokhtar M; Hewala, Ismail I; Emam, Ehab H

2014-08-01

Two selective stability-indicating HPLC methods are described for determination of rabeprazole sodium (RZ)-mosapride citrate (MR) and RZ-itopride hydrochloride (IO) mixtures in the presence of their ICH-stress formed degradation products. Separations were achieved on X-Bridge C18 column using two mobile phases: the first for RZ-MR mixture consisted of acetonitrile: 0.025 M KH 2 PO 4 solution: TEA (30:69:1 v/v; pH 7.0); the second for RZ-IO mixture was at ratio of 25:74:1 (v/v; pH 9.25). The detection wavelength was 283 nm. The two methods were validated and validation acceptance criteria were met in all cases. Peak purity testing using contrast angle theory, relative absorbance and log  A versus the wavelengths plots were presented. The % recoveries of the intact drugs were between 99.1% and 102.2% with RSD% values less than 1.6%. Application of the proposed HPLC methods indicated that the methods could be adopted to follow the stability of their formulations.

Method of calculation of critical values of financial indicators for developing food security strategy

Science.gov (United States)

Aigyl Ilshatovna, Sabirova; Svetlana Fanilevna, Khasanova; Vildanovna, Nagumanova Regina

2018-05-01

On the basis of decision making theory (minimax and maximin approaches) the authors propose a technique with the results of calculations of the critical values of effectiveness indicators of agricultural producers in the Republic of Tatarstan for 2013-2015. There is justified necessity of monitoring the effectiveness of the state support and the direction of its improvement.

Exploring the utility of cardiorespiratory fitness as a population health surveillance indicator for children and youth: An international analysis of results from the 20-m shuttle run test.

Science.gov (United States)

Lang, Justin J

2018-02-01

highlighted the variability across countries, with countries in north-central Europe and Africa having the highest cardiorespiratory fitness, and countries in South America having the lowest cardiorespiratory fitness. The results indicated that declines in cardiorespiratory fitness may have stabilized in recent years in some high- and middle-income countries. This dissertation also identified 2 methods (criterion- and normative-referenced standards) to interpret cardiorespiratory fitness levels among children and youth, methods that could be used to inform future consensus, surveillance, and cardiorespiratory fitness guidelines.

Using Aquatic Insects as Indicators of Water Quality

Science.gov (United States)

Dyche, Steven E.

1977-01-01

Described is a science field activity that studies the presence of certain aquatic insects, like stoneflies, as indicators of water quality. Equipment, materials, and methods are listed in detail, including suggestions for building certain supplies. Results of previous studies on the Yellowstone River are included. (MA)

Performance indicators of work activity.

Science.gov (United States)

Lahoz, Manoela de Assis; Camarotto, João Alberto

2012-01-01

The measurement of performance is a current topic in the management of people in companies, used as a parameter of effectiveness of processes and operations of production. The methods and models of the indicators of current use in the production have concentrated in the assessment of people's performance as determinative resource of the organizational success in the search for the competitiveness. Associated with the classic indicators of performance assessment of the production proceeding, other indicators are used in the assessment of risks and hazards, however with methods focused in the tasks, without connection with the real work activity. The present article explores literature on the models of performance measurement in use in companies and a field research to understand how companies interpret and use indicators that relate health and work, to direct future studies on the subject. Regarding the literature review, one can see that health indicators can be basically divided into two major groups: the legal and managerial indicators. When conducting case studies, it can be realized that companies do not have precisely the concept of health indicator, or were unable to define which of the indicators could be considered indicators of health, considering that absenteeism was the indicator mentioned by the four companies.

Peer groups and operational cycle enhancements to the performance indicator report

International Nuclear Information System (INIS)

Stromberg, H.M.; DeHaan, M.S.; Gentillon, C.D.; Wilson, G.E.; Vanden Heuvel, L.N.

1992-01-01

Accurate performance evaluation and plant trending by the performance indicator program are integral parts of monitoring the operation of commercial nuclear power plants. The presentations of the NRC/AEOD performance indicator program have undergone a number of enhancements. The diversity of the commercial nuclear plants, coupled with continued improvements in the performance indicator program, has resulted in the evaluation of plants in logical peer groups and highlighted the need to evaluate the impact of plant operational conditions on the performance indicators. These enhancements allow a more-meaningful evaluation of operating commercial nuclear power plant performance. This report proposes methods to enhance the presentation of the performance indicator data by analyzing the data in logical peer groups and displaying the performance indicator data based on the operational status of the plants. Previously, preliminary development of the operational cycle displays of the performance indicator data was documented. This report extends the earlier findings and presents the continued development of the peer groups and operational cycle trend and deviation data and displays. This report describes the peer groups and enhanced PI data presentations by considering the operational cycle phase breakdowns, calculation methods, and presentation methods

From lagging indicators to leading indicators : design of a leading indicator dashboard for Philips Lighting

NARCIS (Netherlands)

Cai, Yongjian

2011-01-01

KPI (Key Performance Indicators) such as customer service level and stock level are commonly used in industry to measure the supply chain performance. Supply chain managers have a decided preference for these "lagging" indicators since they only measure the final outcomes that result from their

A semantics-based method for clustering of Chinese web search results

Science.gov (United States)

Zhang, Hui; Wang, Deqing; Wang, Li; Bi, Zhuming; Chen, Yong

2014-01-01

Information explosion is a critical challenge to the development of modern information systems. In particular, when the application of an information system is over the Internet, the amount of information over the web has been increasing exponentially and rapidly. Search engines, such as Google and Baidu, are essential tools for people to find the information from the Internet. Valuable information, however, is still likely submerged in the ocean of search results from those tools. By clustering the results into different groups based on subjects automatically, a search engine with the clustering feature allows users to select most relevant results quickly. In this paper, we propose an online semantics-based method to cluster Chinese web search results. First, we employ the generalised suffix tree to extract the longest common substrings (LCSs) from search snippets. Second, we use the HowNet to calculate the similarities of the words derived from the LCSs, and extract the most representative features by constructing the vocabulary chain. Third, we construct a vector of text features and calculate snippets' semantic similarities. Finally, we improve the Chameleon algorithm to cluster snippets. Extensive experimental results have shown that the proposed algorithm has outperformed over the suffix tree clustering method and other traditional clustering methods.

AHP for indicators of sustainable forestry under Mediterranean conditions

International Nuclear Information System (INIS)

Valls-Donderis, P.; Vallés-Planells, M.; Galiana, F.

2017-01-01

Aim of study: To verify and prioritise a set of sustainable forestry indicators using the Analytic Hierarchy Process (AHP). Area of study: Participants were Spanish; indicators were meant to be applied in forest management units (FMUs) under Mediterranean conditions. Material and methods: An AHP questionnaire was developed and sent to experts. Main Results: the set of indicators aimed to be comprehensive. Indicators were ranked and the ranking allows ascertaining what aspects are more relevant in relation to Mediterranean sustainable forestry. Issues like regeneration or habitats conservation got high values, whereas others like hunting activity were not seen as important by most experts. Research highlights: - Sustainable forest management (SFM) considerations for Mediterranean forests. - Indicators adapt to ecosystem services.

AHP for indicators of sustainable forestry under Mediterranean conditions

Energy Technology Data Exchange (ETDEWEB)

Valls-Donderis, P.; Vallés-Planells, M.; Galiana, F.

2017-11-01

Aim of study: To verify and prioritise a set of sustainable forestry indicators using the Analytic Hierarchy Process (AHP). Area of study: Participants were Spanish; indicators were meant to be applied in forest management units (FMUs) under Mediterranean conditions. Material and methods: An AHP questionnaire was developed and sent to experts. Main Results: the set of indicators aimed to be comprehensive. Indicators were ranked and the ranking allows ascertaining what aspects are more relevant in relation to Mediterranean sustainable forestry. Issues like regeneration or habitats conservation got high values, whereas others like hunting activity were not seen as important by most experts. Research highlights: - Sustainable forest management (SFM) considerations for Mediterranean forests. - Indicators adapt to ecosystem services.

Remote Determination of Cloud Temperature and Transmittance from Spectral Radiance Measurements: Method and Results

Science.gov (United States)

1996-10-01

atmospherics temperatura and humidity profiles. Validation tests performed on experimental spectra demonstrate the occuracy of the method with typical...indicated as with the title.) Passive Remota Sensing Infrared Spectra Cloud Temperatura Cloud Transmittance FTIR Spectrometer Icing Hazard Detection (DCD03E.IFO - 95.02.22) UNCLASSIFIED SECURITY CLASSIFICATION OF FORM

eHealth indicators

DEFF Research Database (Denmark)

HYPPÖNEN, Hannele; AMMENWERTH, Elske; Nøhr, Christian

2012-01-01

eHealth indicators are needed to measure defined aspects of national eHealth implementations. However, until now, eHealth indicators are ambiguous or unclear. Therefore, an expert workshop "Towards an International Minimum Dataset for Monitoring National Health Information System Implementations......" was organized. The objective was to develop ideas for a minimum eHealth indicator set. The proposed ideas for indicators were classified based on EUnetHTA and De-Lone & McClean, and classification was compared with health IT evaluation criteria classification by Ammenwerth & Keizer. Analysis of the workshop...... results emphasized the need for a common methodological framework for defining and classifying eHealth indicators. It also showed the importance of setting the indicators into context. The results will benefit policy makers, developers and researchers in pursuit of provision and use of evidence...

A comparative study between three stability indicating spectrophotometric methods for the determination of diatrizoate sodium in presence of its cytotoxic degradation product based on two-wavelength selection

Science.gov (United States)

Riad, Safaa M.; El-Rahman, Mohamed K. Abd; Fawaz, Esraa M.; Shehata, Mostafa A.

2015-06-01

Three sensitive, selective, and precise stability indicating spectrophotometric methods for the determination of the X-ray contrast agent, diatrizoate sodium (DTA) in the presence of its acidic degradation product (highly cytotoxic 3,5-diamino metabolite) and in pharmaceutical formulation, were developed and validated. The first method is ratio difference, the second one is the bivariate method, and the third one is the dual wavelength method. The calibration curves for the three proposed methods are linear over a concentration range of 2-24 μg/mL. The selectivity of the proposed methods was tested using laboratory prepared mixtures. The proposed methods have been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives. The results were statistically compared with the official US pharmacopeial method. No significant difference for either accuracy or precision was observed.

Comparative study of methods on outlying data detection in experimental results

International Nuclear Information System (INIS)

Oliveira, P.M.S.; Munita, C.S.; Hazenfratz, R.

2009-01-01

The interpretation of experimental results through multivariate statistical methods might reveal the outliers existence, which is rarely taken into account by the analysts. However, their presence can influence the results interpretation, generating false conclusions. This paper shows the importance of the outliers determination for one data base of 89 samples of ceramic fragments, analyzed by neutron activation analysis. The results were submitted to five procedures to detect outliers: Mahalanobis distance, cluster analysis, principal component analysis, factor analysis, and standardized residual. The results showed that although cluster analysis is one of the procedures most used to identify outliers, it can fail by not showing the samples that are easily identified as outliers by other methods. In general, the statistical procedures for the identification of the outliers are little known by the analysts. (author)

Relative performance of three stream bed stability indices as indicators of stream health.

Science.gov (United States)

Kusnierz, Paul C; Holbrook, Christopher M

2017-10-16

Bed stability is an important stream habitat attribute because it affects geomorphology and biotic communities. Natural resource managers desire indices of bed stability that can be used under a wide range of geomorphic conditions, are biologically meaningful, and are easily incorporated into sampling protocols. To eliminate potential bias due to presence of instream wood and increase precision of stability values, we modified a stream bed instability index (ISI) to include measurements of bankfull depth (d bf ) and median particle diameter (D 50 ) only in riffles and increased the pebble count to decrease variability (i.e., increase precision) in D 50 . The new riffle-based instability index (RISI) was compared to two established indices: ISI and the riffle stability index (RSI). RISI and ISI were strongly associated with each other but neither was closely associated with RSI. RISI and ISI were closely associated with both a diatom- and two macrovertebrate-based stream health indices, but RSI was only weakly associated with the macroinvertebrate indices. Unexpectedly, precision of D 50 did not differ between RISI and ISI. Results suggest that RISI is a viable alternative to both ISI and RSI for evaluating bed stability in multiple stream types. With few data requirements and a simple protocol, RISI may also better conform to riffle-based sampling methods used by some water quality practitioners.

Detection of reciprocal chromosome translocations as an indicator of organism exposure to ionizing radiation by FISH-WCP method

International Nuclear Information System (INIS)

Holeckova, B.; Sivikova, K.; Dianovsky, J.; Piesova, E.; Lakatosova, M.

2006-01-01

Chromosome translocations are considered to be the gold standard for assessing ionizing radiation exposure. Because translocations are inherently more stable through cell division than dicentrics, translocations have become the aberration of choice for evaluating many types of exposure. Fluorescence in situ hybridization with whole chromosome painting probes (FISH-WCP) has been shown to be a rapid method of detecting chromosomal rearrangements, and appears to be especially useful for analysis of induced translocations. The present paper shortly describes FISH-WCP method for detection of reciprocal translocations as indicators of exposure to ionizing radiation. (authors)

New Stability Indicating RP-HPLC Method for the Estimation of Cefpirome Sulphate in Bulk and Pharmaceutical Dosage Forms

OpenAIRE

Rao, Kareti Srinivasa; Kumar, Keshar Nargesh; Joydeep, Datta

2011-01-01

A simple stability indicating reversed-phase HPLC method was developed and subsequently validated for estimation of Cefpirome sulphate (CPS) present in pharmaceutical dosage forms. The proposed RP-HPLC method utilizes a LiChroCART-Lichrosphere100, C18 RP column (250 mm ? 4mm ? 5 ?m) in an isocratic separation mode with mobile phase consisting of methanol and water in the proportion of 50:50 % (v/v), at a flow rate 1ml/min, and the effluent was monitored at 270 nm. The retention time of CPS wa...

Quality indicators

DEFF Research Database (Denmark)

Hjorth-Andersen, Christian

1991-01-01

In recent literature it has been suggested that consumers need have no knowledge of product quality as a number of quality indicators (or signals) may be used as substitutes. Very little attention has been paid to the empirical verification of these studies. The present paper is devoted...... to the issue of how well these indicators perform, using market data provided by consumer magazines from 3 countries. The results strongly indicate that price is a poor quality indicator. The paper also presents some evidence which suggests that seller reputation and easily observable characteristics are also...

Nifedipine-loaded polymeric nanocapsules: validation of a stability-indicating HPLC method to evaluate the drug entrapment efficiency and in vitro release profiles.

Science.gov (United States)

Granada, Andréa; Tagliari, Monika Piazzon; Soldi, Valdir; Silva, Marcos António Segatto; Zanetti-Ramos, Betina Ghiel; Fernandes, Daniel; Stulzer, Hellen Karine

2013-01-01

A simple stability-indicating analytical method was developed and validated to quantify nifedipine in polymeric nanocapsule suspensions; an in vitro drug release study was then carried out. The analysis was performed using an RP C18 column, UV-Vis detection at 262 nm, and methanol-water (70 + 30, v/v) mobile phase at a flow rate of 1.2 mL/min. The method was validated in terms of specificity, linearity and range, LOQ, accuracy, precision, and robustness. The results obtained were within the acceptable ranges. The nanocapsules, made of poly(epsilon-caprolactone), were prepared by the solvent displacement technique and showed high entrapment efficiency. The entrapment efficiency was 97.6 and 98.2% for the nifedipine-loaded polymeric nanocapsules prepared from polyvinyl alcohol (PVA) and Pluronic F68 (PF68), respectively. The particle size and zeta potential of nanocapsules were found to be influenced by the nature of the stabilizer used. The mean diameter and zeta potential for nanocapsules with PVA and PF68 were 290.9 and 179.9 nm, and -17.7 mV and -32.7 mV, respectively. The two formulations prepared showed a drug release of up to 70% over 4 days. This behavior indicates the viability of this drug delivery system for use as a controlled-release system.

New method of scoliosis assessment: preliminary results using computerized photogrammetry.

Science.gov (United States)

Aroeira, Rozilene Maria Cota; Leal, Jefferson Soares; de Melo Pertence, Antônio Eustáquio

2011-09-01

A new method for nonradiographic evaluation of scoliosis was independently compared with the Cobb radiographic method, for the quantification of scoliotic curvature. To develop a protocol for computerized photogrammetry, as a nonradiographic method, for the quantification of scoliosis, and to mathematically relate this proposed method with the Cobb radiographic method. Repeated exposure to radiation of children can be harmful to their health. Nevertheless, no nonradiographic method until now proposed has gained popularity as a routine method for evaluation, mainly due to a low correspondence to the Cobb radiographic method. Patients undergoing standing posteroanterior full-length spine radiographs, who were willing to participate in this study, were submitted to dorsal digital photography in the orthostatic position with special surface markers over the spinous process, specifically the vertebrae C7 to L5. The radiographic and photographic images were sent separately for independent analysis to two examiners, trained in quantification of scoliosis for the types of images received. The scoliosis curvature angles obtained through computerized photogrammetry (the new method) were compared to those obtained through the Cobb radiographic method. Sixteen individuals were evaluated (14 female and 2 male). All presented idiopathic scoliosis, and were between 21.4 ± 6.1 years of age; 52.9 ± 5.8 kg in weight; 1.63 ± 0.05 m in height, with a body mass index of 19.8 ± 0.2. There was no statistically significant difference between the scoliosis angle measurements obtained in the comparative analysis of both methods, and a mathematical relationship was formulated between both methods. The preliminary results presented demonstrate equivalence between the two methods. More studies are needed to firmly assess the potential of this new method as a coadjuvant tool in the routine following of scoliosis treatment.

Stability-indicating UPLC method for determination of Valsartan and their degradation products in active pharmaceutical ingredient and pharmaceutical dosage forms.

Science.gov (United States)

Krishnaiah, Ch; Reddy, A Raghupathi; Kumar, Ramesh; Mukkanti, K

2010-11-02

A simple, precise, accurate stability-indicating gradient reverse phase ultra-performance liquid chromatographic (RP-UPLC) method was developed for the quantitative determination of purity of Valsartan drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. The method was developed using Waters Aquity BEH C18 (100 mm x 2.1 mm, 1.7 microm) column with mobile phase containing a gradient mixture of solvents A and B. The eluted compounds were monitored at 225 nm, the run time was within 9.5 min, which Valsartan and its seven impurities were well separated. Valsartan was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Valsartan was found to degrade significantly in acid and oxidative stress conditions and stable in base, hydrolytic and photolytic degradation conditions. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per international conference on harmonization (ICH) guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of Valsartan in pharmaceutical dosage forms.

Stability-Indicating TLC-Densitometric and HPLC Methods for the Simultaneous Determination of Piracetam and Vincamine in the Presence of Their Degradation Products.

Science.gov (United States)

Ahmed, Amal B; Abdelrahman, Maha M; Abdelwahab, Nada S; Salama, Fathy M

2016-11-01

Newly established TLC-densitometric and RP-HPLC methods were developed and validated for the simultaneous determination of Piracetam (PIR) and Vincamine (VINC) in their pharmaceutical formulation and in the presence of PIR and VINC degradation products, PD and VD, respectively. The proposed TLC-densitometric method is based on the separation and quantitation of the studied components using a developing system that consists of chloroform-methanol-glacial acetic acid-triethylamine (8 + 2 + 0.1 + 0.1, v/v/v/v) on TLC silica gel 60 F254 plates, followed by densitometric scanning at 230 nm. On the other hand, the developed RP-HPLC method is based on the separation of the studied components using an isocratic elution of 0.05 M KH2PO4 (containing 0.1% triethylamine adjusted to pH 3 with orthophosphoric acid)-methanol (95 + 5, v/v) on a C8 column at a flow rate of 1 mL/min with diode-array detection at 230 nm. The developed methods were validated according to International Conference on Harmonization guidelines and demonstrated good accuracy and precision. Moreover, the developed TLC-densitometric and RP-HPLC methods are suitable as stability-indicating assay methods for the simultaneous determination of PD and VD either in bulk powder or pharmaceutical formulation. The results were statistically compared with those obtained by the reported RP-HPLC method using t- and F-tests.

Methodological foundations of evaluation of effectiveness indicators of small-scale business activities

Directory of Open Access Journals (Sweden)

Ivanova T.

2013-01-01

Full Text Available The methodological approach to the measurement of financial indicators of small-scale enterprises has been developed. It enables to secure the comparability of financial condition indicators and the results of small-scale enterprise activities, and also to develop the methods of vertical integral estimate calculation at separate aspects of financial condition and the results of smallscale enterprise activities.

Soil Particle Size Analysis by Laser Diffractometry: Result Comparison with Pipette Method

Science.gov (United States)

Šinkovičová, Miroslava; Igaz, Dušan; Kondrlová, Elena; Jarošová, Miriam

2017-10-01

Soil texture as the basic soil physical property provides a basic information on the soil grain size distribution as well as grain size fraction representation. Currently, there are several methods of particle dimension measurement available that are based on different physical principles. Pipette method based on the different sedimentation velocity of particles with different diameter is considered to be one of the standard methods of individual grain size fraction distribution determination. Following the technical advancement, optical methods such as laser diffraction can be also used nowadays for grain size distribution determination in the soil. According to the literature review of domestic as well as international sources related to this topic, it is obvious that the results obtained by laser diffractometry do not correspond with the results obtained by pipette method. The main aim of this paper was to analyse 132 samples of medium fine soil, taken from the Nitra River catchment in Slovakia, from depths of 15-20 cm and 40-45 cm, respectively, using laser analysers: ANALYSETTE 22 MicroTec plus (Fritsch GmbH) and Mastersizer 2000 (Malvern Instruments Ltd). The results obtained by laser diffractometry were compared with pipette method and the regression relationships using linear, exponential, power and polynomial trend were derived. Regressions with the three highest regression coefficients (R2) were further investigated. The fit with the highest tightness was observed for the polynomial regression. In view of the results obtained, we recommend using the estimate of the representation of the clay fraction (analysis is done according to laser diffractometry. The advantages of laser diffraction method comprise the short analysis time, usage of small sample amount, application for the various grain size fraction and soil type classification systems, and a wide range of determined fractions. Therefore, it is necessary to focus on this issue further to address the

Stability indicating high performance thin-layer chromatographic method for simultaneous estimation of pantoprazole sodium and itopride hydrochloride in combined dosage form

Directory of Open Access Journals (Sweden)

Deepak Bageshwar

2011-11-01

Full Text Available A specific, precise and stability indicating high-performance thin-layer chromatographic method for simultaneous estimation of pantoprazole sodium and itopride hydrochloride in pharmaceutical formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F254 as the stationary phase. The solvent system consisted of methanol:water:ammonium acetate; 4.0:1.0:0.5 (v/v/v. This system was found to give compact and dense spots for both itopride hydrochloride (Rf value of 0.55±0.02 and pantoprazole sodium (Rf value of 0.85±0.04. Densitometric analysis of both drugs was carried out in the reflectance–absorbance mode at 289 nm. The linear regression analysis data for the calibration plots showed a good linear relationship with R2=0.9988±0.0012 in the concentration range of 100–400 ng for pantoprazole sodium. Also, the linear regression analysis data for the calibration plots showed a good linear relationship with R2=0.9990±0.0008 in the concentration range of 200–1200 ng for itopride hydrochloride. The method was validated for specificity, precision, robustness and recovery. Statistical analysis proves that the method is repeatable and selective for the estimation of both the said drugs. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating method. Keywords: Gastroesophageal reflux disease (GERD, Itopride hydrochloride, Pantoprazole sodium, High performance thin layer chromatography (HPTLC, Stability indicating, Forced degradation

PERFORMANCE INDICES TO DESIGN A MULTICOMPONENT BATCH DISTILLATION COLUMN USING A SHORTCUT METHOD

Directory of Open Access Journals (Sweden)

A. Narvaes-Garcia

2015-06-01

Full Text Available AbstractIn this paper, three quality or performance indices (Luyben's capacity factor, total annual costs, and annual profit were applied for the design of a batch distillation column working at variable reflux. This work used the Fenske-Underwood-Gilliland short-cut method to solve a problem of four components (benzene, toluene, ethyl-benzene, and ortho-xylene that needed to be separated and purified to a mole fraction of 0.97 or better. The performance of the system was evaluated using distillation columns with 10, 20, 30, 40 and 50 theoretical stages with a boil-up vapor flow set at 100 kmol/h. It was found that the annual profit was the best quality index, while the best case for variable reflux was the column with 50 stages. It was confirmed that the best case always required a reflux ratio close to the minimum.

A set of care quality indicators for stroke management.

Science.gov (United States)

Navarro Soler, I M; Ignacio García, E; Masjuan Vallejo, J; Gállego Culleré, J; Mira Solves, J J

2017-06-22

This study proposes a set of quality indicators for care outcomes in patients with acute cerebral infarction. These indicators are understandable and relevant from a clinical viewpoint, as well as being acceptable and feasible in terms of time required, ease of data capture, and interpretability. The method consisted of reaching consensus among doctors after having reviewed the literature on quality indicators in stroke. We then designed and conducted a field study to assess the understandability and feasibility of the set of indicators. Consensus yielded 8 structural indicators, 5 process indicators, and 12 result indicators. Additionally, standards of reference were established for each indicator. This set of indicators can be used to monitor the quality care for stroke patients, identify strengths, and potentially to identify areas needing improvement. Copyright © 2017 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

Stability indicating method development and validation of assay method for the estimation of rizatriptan benzoate in tablet

Directory of Open Access Journals (Sweden)

Chandrashekhar K. Gadewar

2017-05-01

Full Text Available A simple, sensitive, precise and specific high performance liquid chromatography method was developed and validated for the determination of rizatriptan in rizatriptan benzoate tablet. The separation was carried out by using a mobile phase consisting of acetonitrile: pH 3.4 phosphate buffer in ratio of 20:80. The column used was Zorbax SB CN 250 mm × 4.6 mm, 5 μ with a flow rate of 1 ml/min using UV detection at 225 nm. The retention time of rizatriptan and benzoic acid was found to be 4.751 and 8.348 min respectively. A forced degradation study of rizatriptan benzoate in its tablet form was conducted under the condition of hydrolysis, oxidation, thermal and photolysis. Rizatriptan was found to be stable in basic buffer while in acidic buffer was found to be degraded (water bath at 60 °C for 15 min. The detector response of rizatriptan is directly proportional to concentration ranging from 30% to 160% of test concentration i.e. 15.032 to 80.172 mcg/ml. Results of analysis were validated statistically and by recovery studies (mean recovery = 99.44. The result of the study showed that the proposed method is simple, rapid, precise and accurate, which is useful for the routine determination of rizatriptan in pharmaceutical dosage forms.

Use of Balanced Indicators as a Management Tool in Nursing

Directory of Open Access Journals (Sweden)

Neidamar Pedrini Arias Fugaça

2015-12-01

Full Text Available Objective: to develop a proposal for a nursing panel of indicators based on the guiding principles of Balanced Scorecard. Method: a single case study that ranked 200 medical records of patients, management reports and protocols, which are capable of generating indicators. Results: we identified 163 variables that resulted in 72 indicators; of these, 32 nursing-related: two financial indicators (patient's average revenue per day and patient's revenue per day by product used; two client indicators (overall satisfaction rate of patient with nursing care and adherence rate to the patient satisfaction survey; 23 process indicators, and five learning and growth indicators (average total hours of training, total of approved nursing professionals in the internal selection process, absenteeism rate, turnover rate and index of performance evaluation. Conclusion: although there is a limit related to the amount of data generated, the methodology of Balanced Scorecard has proved to be flexible and adaptable to incorporate nursing services. It was possible to identify indicators with adherence to more than one area. Internal processes was the area with the higher number of indicators.

Dimensionality reduction of quality of life indicators

Directory of Open Access Journals (Sweden)

Andrea Jindrová

2012-01-01

Full Text Available Selecting indicators for assessing the quality of life at the regional level is not unambigous. Currently, there are no precisely defined indicators that would give comprehensive information about the quality of life on a local level. In this paper we focus on the determination (selection of groups of indicators that can be interpreted, on the basis of studied literature, as factors characterizing the quality of life. Furthermore, on the application of methods to reduce the dimensionality of these indicators, from the source of the database CULS KROK, which provides statistics on the regional and districts level. To reduce the number of indicators and the subsequent creation of derived variables that capture the relationships between selected indicators multivariate statistical analysis methods, especially method of principal components and factor analysis were used. This paper also indicates the methodology grant project “Methodological Approaches to assess Subjective Aspects of the life quality in regions of the Czech Republic”.

Prognostic indices for brain metastases – usefulness and challenges

Directory of Open Access Journals (Sweden)

Nieder Carsten

2009-03-01

Full Text Available Abstract Background This review addresses the strengths and weaknesses of 6 different prognostic indices, published since the Radiation Therapy Oncology Group (RTOG developed and validated the widely used 3-tiered prognostic index known as recursive partitioning analysis (RPA classes, i.e. between 1997 and 2008. In addition, other analyses of prognostic factors in groups of patients, which typically are underrepresented in large trials or databases, published in the same time period are reviewed. Methods Based on a systematic literature search, studies with more than 20 patients were included. The methods and results of prognostic factor analyses were extracted and compared. The authors discuss why current data suggest a need for a more refined index than RPA. Results So far, none of the indices has been derived from analyses of all potential prognostic factors. The 3 most recently published indices, including the RTOG's graded prognostic assessment (GPA, all expanded from the primary 3-tiered RPA system to a 4-tiered system. The authors' own data confirm the results of the RTOG GPA analysis and support further evaluation of this tool. Conclusion This review provides a basis for further refinement of the current prognostic indices by identifying open questions regarding, e.g., performance of the ideal index, evaluation of new candidate parameters, and separate analyses for different cancer types. Unusual primary tumors and their potential differences in biology or unique treatment approaches are not well represented in large pooled analyses.

A Simple and Specific Stability- Indicating RP-HPLC Method for Routine Assay of Adefovir Dipivoxil in Bulk and Tablet Dosage Form.

Science.gov (United States)

Darsazan, Bahar; Shafaati, Alireza; Mortazavi, Seyed Alireza; Zarghi, Afshin

2017-01-01

A simple and reliable stability-indicating RP-HPLC method was developed and validated for analysis of adefovir dipivoxil (ADV).The chromatographic separation was performed on a C 18 column using a mixture of acetonitrile-citrate buffer (10 mM at pH 5.2) 36:64 (%v/v) as mobile phase, at a flow rate of 1.5 mL/min. Detection was carried out at 260 nm and a sharp peak was obtained for ADV at a retention time of 5.8 ± 0.01 min. No interferences were observed from its stress degradation products. The method was validated according to the international guidelines. Linear regression analysis of data for the calibration plot showed a linear relationship between peak area and concentration over the range of 0.5-16 μg/mL; the regression coefficient was 0.9999and the linear regression equation was y = 24844x-2941.3. The detection (LOD) and quantification (LOQ) limits were 0.12 and 0.35 μg/mL, respectively. The results proved the method was fast (analysis time less than 7 min), precise, reproducible, and accurate for analysis of ADV over a wide range of concentration. The proposed specific method was used for routine quantification of ADV in pharmaceutical bulk and a tablet dosage form.

Kyphoplasty: indications, contraindications and technique

International Nuclear Information System (INIS)

Masala, Salvatore; Fiori, Roberto; Massari, Francesco; Simonetti, Giovanni

2005-01-01

Purpose. Percutaneous Kyphoplasty is an emerging Interventional Radiology technique consisting in injecting polymethylmethacrylate (PMMA) into collapsed vertebral bodies under fluoroscopic guidance, after compaction of the cancellous bone with two dedicated balloon catheters. The purpose of our study was to assess the indications, contraindications, technique and results of our initial study. Materials and methods. Between January and May 2003 we treated 11 patients (5 men, 6 women) with vertebral collapse occurred up to three months earlier and osteoporosis or myeloma (mean age: 68.9), with pain refractory to medical therapy. All patients underwent treatment on a single vertebra (1 D7; 1 D8; 2 D12; 3 L1; 3 L2; 1 l4). Patient selection was based on clinical and instrumental criteria: conventional radiography, CT and MR were performed on all patients before the procedure. The Visual Analogue scale (VAS) for pain assessment was used to evaluate the post-procedure results. Results. All patients showed an increase in the height of the collapsed vertebral body, associated with partial or complete pain relief (VAS score decreasing from a pre-treatment score of 8 to a score of 2 after treatment). No complications related to the procedure were recorded. Conclusions. The indications for kyphoplasty include recent vertebral compression fractures due to osteoporosis, myeloma, metastasis and vertebral angioma with intractable pain and with no neurological symptoms. The main contraindications are coagulation disorders, unstable fractures or complete vertebral collapse (vertebra plana). Kyphoplasty proved to be a safe and effective method for the treatment of intractable pain due to vertebral collapse that allows for shorter hospital stays and an immediate improvement in the patient's quality of life [it

Supply chain management based on logistic and statical indicators

Directory of Open Access Journals (Sweden)

Marcin Hajdul

2014-09-01

Full Text Available Background: Article presents a model concept of supporting supply chain management based on predefined correlation between logistic and statistical performance indicators. Paper presents how, set of logistics indicators at different levels of management and a set of statistical indicators broken down by macroeconomic and microeconomic level, can be used in order to improve supply chain management. The correlation coefficients are presented for evaluating the relationships between the selected samples of individual indicators. Methods: In order to present relationships between the indicators used are elements of statistics such as correlation coefficients Spearman's rho and Kendall's tau-b. Results: As a result of work carried out obtained a list of logistics indicators and statistics that can be used when making decisions in supply chain management. Obtained the degree of relationships between the individual indicators, through the designation values of correlation indicators. Conclusions: Efficient supply chain management requires not only the proper selection of indicators, both logistical and statistical, which support decision-making. Important element is also identification of the correlation between the indicators at micro (company and macro (environment level. This will enable the correct way to draw conclusions from the reports and take corrective action for a specific branch or a company. 

A set of professional working ability indicators of military operators

Directory of Open Access Journals (Sweden)

Mykola Korchahin

2017-08-01

Full Text Available Purpose: determination of indicators of professional work capacity and their impact on the success of professional activity of military operators in the cycle of alert duty. Material & Methods: indicators of the professional capacity of military operators were determined through theoretical analysis, systematization and generalization of data from scientific and methodological sources, medical-biological, psycho-diagnostic methods and mathematical methods of processing the results of the study. Result: it is determined that the most informative indirect indicators of the professional capacity of military operators of the contract service of the Air Forces of the Armed Forces of Ukraine is: physical condition, psycho-emotional state, physical performance, aerobic endurance, static endurance of back muscles, neck and the abs, the speed of perception, memory, concentration and shifting attention. The correlation dependence of the level of professional preparedness of military operators on indirect indices of professional work capacity: physical fitness (r=0,58, psycho-emotional state (r=0,51, physical performance (r=0,34, aerobic endurance (r=0.59, static endurance of the muscles of the back and neck (r=0,52, static endurance of the abs muscles (r=0,48, simple sensorimotor reaction (r=0,44, short-term (operational memory (r=0,40, concentration and attention switching (r=0,46. Conclusion: a complex characteristic of the indicators of psycho-physiological functions of the body of a specialist can be used to assess the dynamics and prediction of the professional capacity of military operators of the Air Force in the cycle of alert duty.

Processing method and results of meteor shower radar observations

International Nuclear Information System (INIS)

Belkovich, O.I.; Suleimanov, N.I.; Tokhtasjev, V.S.

1987-01-01

Studies of meteor showers permit the solving of some principal problems of meteor astronomy: to obtain the structure of a stream in cross section and along its orbits; to retrace the evolution of particle orbits of the stream taking into account gravitational and nongravitational forces and to discover the orbital elements of its parent body; to find out the total mass of solid particles ejected from the parent body taking into account physical and chemical evolution of meteor bodies; and to use meteor streams as natural probes for investigation of the average characteristics of the meteor complex in the solar system. A simple and effective method of determining the flux density and mass exponent parameter was worked out. This method and its results are discussed

NRC performance indicator program

International Nuclear Information System (INIS)

Singh, R.N.

1987-01-01

The performance indicator development work of the US Nuclear Regulatory Commission (NRC) interoffice task group involved several major activities that included selection of candidate indicators for a trial program, data collection and review, validation of the trial indicators, display method development, interactions with the industry, and selection of an optimum set of indicators for the program. After evaluating 27 potential indicators against certain ideal attributes, the task group selected 17 for the trial program. The pertinent data for these indicators were then collected from 50 plants at 30 sites. The validation of the indicators consisted of two primary processes: logical validity and statistical analysis. The six indicators currently in the program are scrams, safety system actuations, significant events, safety system failures, forced outage rate, and equipment forced outages per 100 critical hours. A report containing data on the six performance indicators and some supplemental information is issued on a quarterly basis. The NRC staff is also working on refinements of existing indicators and development of additional indicators as directed by the commission

Scenario analysis of false indication in computer-control systems

International Nuclear Information System (INIS)

Tseng, Wan-Hui; Fan, Chin-Feng

2013-01-01

Highlights: ► A new failure mode and effect for safety-critical systems is proposed. ► False indication is the most dreadful kind of partial failures. ► A model-based simulation approach to generate failure scenarios is proposed. ► Simulation results showed that multiple errors may cause undesired consequences. ► An assertion-based method to detect false indication problems is provided. -- Abstract: Computer control may cause additional failure modes and effects that are new to analogue systems. False indication is one such failure mode that may bring unknown risks to a system. False indication refers to the problem when part of a system fails while other processes still work, and the failure is not revealed to operators. This paper presents a model-based simulation approach to systematically generate potential false indication and unintended consequences. Experiments showed that once a false indication occurs, it may have drastic effects on system safety. False indication can mislead the operator to perform adverse actions or no action. Therefore, we propose an assertion-based detection method to alleviate such failures. Our assertions contain process/device dependencies, timing relations and physical conservation rules. With these assertions, the operator may be alerted at run time. The proposed technique can reduce false indication problem. Moreover, it can also be used to assist the system design.

Passive Seismic for Hydrocarbon Indicator : Between Expectation and Reality

Science.gov (United States)

Pandito, Riky H. B.

2018-03-01

In between 5 – 10 years, in our country, passive seismic method became more popular to finding hydrocarbon. Low price, nondestructive acquisition and easy to mobilization is the best reason for choose the method. But in the other part, some people are pessimistically to deal with the result. Instrument specification, data condition and processing methods is several points which influence characteristic and interpretation passive seismic result. In 2010 one prospect in East Java Basin has been measurement constist of 112 objective points and several calibration points. Data measurement results indicate a positive response. Furthermore, in 2013 exploration drliing conducted on the prospect. Drill steam test showes 22 MMCFD in objective zone, upper – late oligocene. In 2015, remeasurement taken in objective area and show consistent responses with previous measurement. Passive seismic is unique method, sometimes will have difference results on dry, gas and oil area, in field production and also temporary suspend area with hidrocarbon content.

Vegetation indices as indicators of damage by the sunn pest ...

African Journals Online (AJOL)

SERVER

2008-01-18

Jan 18, 2008 ... nylon cloth cage experiments were conducted to determine the feasibility of using remote sensing techniques to ... conventionally used method for the sunn pest manage- ... Study area and sunn pest experiment design ... graphy is nearly flat. .... for determination of indices showed an increasing pattern.

Management of Industrial Performance Indicators: Regression Analysis and Simulation

Directory of Open Access Journals (Sweden)

Walter Roberto Hernandez Vergara

2017-11-01

Full Text Available Stochastic methods can be used in problem solving and explanation of natural phenomena through the application of statistical procedures. The article aims to associate the regression analysis and systems simulation, in order to facilitate the practical understanding of data analysis. The algorithms were developed in Microsoft Office Excel software, using statistical techniques such as regression theory, ANOVA and Cholesky Factorization, which made it possible to create models of single and multiple systems with up to five independent variables. For the analysis of these models, the Monte Carlo simulation and analysis of industrial performance indicators were used, resulting in numerical indices that aim to improve the goals’ management for compliance indicators, by identifying systems’ instability, correlation and anomalies. The analytical models presented in the survey indicated satisfactory results with numerous possibilities for industrial and academic applications, as well as the potential for deployment in new analytical techniques.

Linear indices in nonlinear structural equation models : best fitting proper indices and other composites

NARCIS (Netherlands)

Dijkstra, T.K.; Henseler, J.

2011-01-01

The recent advent of nonlinear structural equation models with indices poses a new challenge to the measurement of scientific constructs. We discuss, exemplify and add to a family of statistical methods aimed at creating linear indices, and compare their suitability in a complex path model with

Percutaneous transluminal angioplasty in the region of the renal artery: indications, technique and results

Energy Technology Data Exchange (ETDEWEB)

Olbert, F; Ogris, E; Muzika, N; Schlegl, A; Vacariu, O; Diez, W

1985-01-01

The paper reports the results obtained by percutaneous transluminal angioplasty (PTA) in the treatment of renal artery stenosis in 25 patients with secondary hypertension and discusses indications and the technique used. The follow-up period ranged from 0.5 to 12 months. All interventions were performed with the Olbert catheter system. Following PTA a significant decrease in systolic, diastolic and mean arterial pressure was observed in nearly all patients. The response of the plasma renin activity (PRA) to orthostatic stimulation and pharmacological stimulation by furosemide was determined in a subset of 15 patients before and after PTA. A significant decrease in both basal and stimulated PRA values was observed subsequent to PTA. The decrease in PRA values after successful PTA did not, however, correlate with the extent of the blood pressure changes. (Author).

Percutaneous transluminal angioplasty in the region of the renal artery: indications, technique and results

International Nuclear Information System (INIS)

Olbert, F.; Ogris, E.; Muzika, N.; Schlegl, A.; Vacariu, O.; Diez, W.

1985-01-01

The paper reports the results obtained by percutaneous transluminal angioplasty (PTA) in the treatment of renal artery stenosis in 25 patients with secondary hypertension and discusses indications and the technique used. The follow-up period ranged from 0.5 to 12 months. All interventions were performed with the Olbert catheter system. Following PTA a significant decrease in systolic, diastolic and mean arterial pressure was observed in nearly all patients. The response of the plasma renin activity (PRA) to orthostatic stimulation and pharmacological stimulation by furosemide was determined in a subset of 15 patients before and after PTA. A significant decrease in both basal and stimulated PRA values was observed subsequent to PTA. The decrease in PRA values after successful PTA did not, however, correlate with the extent of the blood pressure changes. (Author)

The method of producing climate change datasets impacts the resulting policy guidance and chance of mal-adaptation

Directory of Open Access Journals (Sweden)

Marie Ekström

2016-12-01

Full Text Available Impact, adaptation and vulnerability (IAV research underpin strategies for adaptation to climate change and help to conceptualise what life may look like in decades to come. Research draws on information from global climate models (GCMs though typically post-processed into a secondary product with finer resolution through methods of downscaling. Through worked examples set in an Australian context we assess the influence of GCM sub-setting, geographic area sub-setting and downscaling method on the regional change signal. Examples demonstrate that choices impact on the final results differently depending on factors such as application needs, range of uncertainty of the projected variable, amplitude of natural variability, and size of study region. For heat extremes, the choice of emissions scenario is of prime importance, but for a given scenario the method of preparing data can affect the magnitude of the projection by a factor of two or more, strongly affecting the indicated adaptation decision. For catchment level runoff projections, the choice of emission scenario is less dominant. Rather the method of selecting and producing application-ready datasets is crucial as demonstrated by results with opposing sign of change, raising the real possibility of mal-adaptive decisions. This work illustrates the potential pitfalls of GCM sub-sampling or the use of a single downscaled product when conducting IAV research. Using the broad range of change from all available model sources, whilst making the application more complex, avoids the larger problem of over-confidence in climate projections and lessens the chance of mal-adaptation.

Methods for extracting climate indicator data from social media.

Science.gov (United States)

Fuka, M. Z.; Fuka, D. R.

2011-12-01

This paper shows how we've used the R software suite to extract climate indicator data from Twitter. In the course of this research we've collected extensive data sets of unsolicited observations ("tweets") for hundreds of climate-related phenological, biological, epidemiological and meteorological effects. R has proved itself in our work as a useful tool for manipulating those large data sets. Our experience from this effort has yielded a variety of insights on using R to extract geophysics-specific information from publicly accessible social media sources. We illustrate our methodology by mapping tweeted US armadillo sightings to explore the impact of climate variability on the extent of the animal's range. This example usefully demonstrates R's technical capabilities in collecting, time-stamping, geolocating, analyzing, visualizing and otherwise processing climate-related data derived from unsolicited social media postings. We also "mash-up" the data sets with those acquired by more traditional means, for example, temperature and precipitation data across the armadillo's US range. Our data-handling practice is extendable to social sharing services other than Twitter, providing the environmental modeling community an opportunity to access largely untapped resources of non-traditional climate indicator data to better understand the effects of climate change at local, regional and global scales.

Respiratory sinus arrhythmia responses to induced emotional states: effects of RSA indices, emotion induction method, age, and sex.

Science.gov (United States)

Overbeek, Thérèse J M; van Boxtel, Anton; Westerink, Joyce H D M

2012-09-01

The literature shows large inconsistencies in respiratory sinus arrhythmia (RSA) responses to induced emotional states. This may be caused by differences in emotion induction methods, RSA quantification, and non-emotional demands of the situation. In 83 healthy subjects, we studied RSA responses to pictures and film fragments eliciting six different discrete emotions relative to neutral baseline stimuli. RSA responses were quantified in the time and frequency domain and were additionally corrected for differences in mean heart rate and respiration rate, resulting in eight different RSA response measures. Subjective ratings of emotional stimuli and facial electromyographic responses indicated that pictures and film fragments elicited the intended emotions. Although RSA measures showed various emotional effects, responses were quite heterogeneous and frequently nonsignificant. They were substantially influenced by methodological factors, in particular time vs. frequency domain response measures, correction for changes in respiration rate, use of pictures vs. film fragments, and sex of participants. Copyright © 2012 Elsevier B.V. All rights reserved.

How the RNA isolation method can affect microRNA microarray results

DEFF Research Database (Denmark)

Podolska, Agnieszka; Kaczkowski, Bogumil; Litman, Thomas

2011-01-01

RNA microarray analysis on porcine brain tissue. One method is a phenol-guanidine isothiocyanate-based procedure that permits isolation of total RNA. The second method, miRVana™ microRNA isolation, is column based and recovers the small RNA fraction alone. We found that microarray analyses give different results...... that depend on the RNA fraction used, in particular because some microRNAs appear very sensitive to the RNA isolation method. We conclude that precautions need to be taken when comparing microarray studies based on RNA isolated with different methods.......The quality of RNA is crucial in gene expression experiments. RNA degradation interferes in the measurement of gene expression, and in this context, microRNA quantification can lead to an incorrect estimation. In the present study, two different RNA isolation methods were used to perform micro...

Correlation of Improved Version of Cervical Vertebral Maturation Indicator with Other Growth Maturity Indicators

Directory of Open Access Journals (Sweden)

Tripti Tikku

2013-01-01

Conclusion: The correlation between middle phalanx of 3rd finger (MP3 and cervical vertebral maturation method (CVMI and CVMS was higher as compared to the correlation of either of the cervical vertebral maturation method or MP3 with dental maturation indicator.

[Endoscopic calcaneoplasty (ECP) in Haglund's syndrome. Indication, surgical technique, surgical findings and results].

Science.gov (United States)

Jerosch, J; Sokkar, S; Dücker, M; Donner, A

2012-06-01

Posterior calcaneal exostosis treatment modalities have given rise to many controversial opinions. After failure of the conservative treatment, surgical bursectomy and resection of the calcaneal exostosis are indicated by many authors. But clinical studies also show a high rate of unsatisfactory results with a relative high incidence of complications. The minimally invasive surgical technique by an endoscopic calcaneoplasty (ECP) could be an option to overcome some of these problems. Between 1999 und 2010 we operated 164 patients with an age range between 16 and 67 years, 81 males and 83 females. The radiological examination prior to surgery documented in all cases a posterior superior calcaneal exostosis that showed friction to the Achilles tendon. All patients included in the study had no clinical varus of the hind foot, nor cavus deformities. All patients had undergone a trial of conservative treatment for at least 6 months and did not show a positive response. The average follow-up was 46.3 (range: 8-120) months. According to the Ogilvie-Harris score 71 patients presented good and 84 patients excellent results, while 5 patients showed fair results, and 4 patients only poor results. All the post-operative radiographs showed sufficient resection of the calcaneal spur. In 61 patients the preoperative MRI showed a partial rupture of the Achilles tendon close to the insertion side. In no case could we observe a complete tear at the time of follow-up. Only minor postoperative complications were observed. In many patients we could observe a chondral layer at the posterior aspect of the calcaneus. Close to the intersion the Achilles tendon showed also in many patients a chondroide metaplasia. ECP is an effective and minimally invasive procedure for the treatment of patients with calcaneal exostosis. After a short learning curve the endoscopic exposure is superior to the open technique, has less morbidity, less operating time, and nearly no complications. Moreover, the

New methods for optical distance indicator and gantry angle quality control tests in medical linear accelerators: image processing by using a 3D phantom

Energy Technology Data Exchange (ETDEWEB)

Shandiz, Mahdi Heravian; Khalilzadeh, Mohammadmahdi; Anvari, Kazem [Mashhad Branch, Islamic Azad University, Mashhad (Iran, Islamic Republic of); Layen, Ghorban Safaeian [Mashhad University of Medical Science, Mashhad (Iran, Islamic Republic of)

2015-03-15

In order to keep the acceptable level of the radiation oncology linear accelerators, it is necessary to apply a reliable quality assurance (QA) program. The QA protocols, published by authoritative organizations, such as the American Association of Physicists in Medicine (AAPM), determine the quality control (QC) tests which should be performed on the medical linear accelerators and the threshold levels for each test. The purpose of this study is to increase the accuracy and precision of the selected QC tests in order to increase the quality of treatment and also increase the speed of the tests to convince the crowded centers to start a reliable QA program. A new method has been developed for two of the QC tests; optical distance indicator (ODI) QC test as a daily test and gantry angle QC test as a monthly test. This method uses an image processing approach utilizing the snapshots taken by the CCD camera to measure the source to surface distance (SSD) and gantry angle. The new method of ODI QC test has an accuracy of 99.95% with a standard deviation of 0.061 cm and the new method for gantry angle QC has a precision of 0.43 degrees. The automated proposed method which is used for both ODI and gantry angle QC tests, contains highly accurate and precise results which are objective and the human-caused errors have no effect on the results. The results show that they are in the acceptable range for both of the QC tests, according to AAPM task group 142.

New methods for optical distance indicator and gantry angle quality control tests in medical linear accelerators: image processing by using a 3D phantom

International Nuclear Information System (INIS)

Shandiz, Mahdi Heravian; Khalilzadeh, Mohammadmahdi; Anvari, Kazem; Layen, Ghorban Safaeian

2015-01-01

In order to keep the acceptable level of the radiation oncology linear accelerators, it is necessary to apply a reliable quality assurance (QA) program. The QA protocols, published by authoritative organizations, such as the American Association of Physicists in Medicine (AAPM), determine the quality control (QC) tests which should be performed on the medical linear accelerators and the threshold levels for each test. The purpose of this study is to increase the accuracy and precision of the selected QC tests in order to increase the quality of treatment and also increase the speed of the tests to convince the crowded centers to start a reliable QA program. A new method has been developed for two of the QC tests; optical distance indicator (ODI) QC test as a daily test and gantry angle QC test as a monthly test. This method uses an image processing approach utilizing the snapshots taken by the CCD camera to measure the source to surface distance (SSD) and gantry angle. The new method of ODI QC test has an accuracy of 99.95% with a standard deviation of 0.061 cm and the new method for gantry angle QC has a precision of 0.43 degrees. The automated proposed method which is used for both ODI and gantry angle QC tests, contains highly accurate and precise results which are objective and the human-caused errors have no effect on the results. The results show that they are in the acceptable range for both of the QC tests, according to AAPM task group 142.

Comparison of the analysis result between two laboratories using different methods

International Nuclear Information System (INIS)

Sri Murniasih; Agus Taftazani

2017-01-01

Comparison of the analysis result of volcano ash sample between two laboratories using different analysis methods. The research aims to improve the testing laboratory quality and cooperate with the testing laboratory from other country. Samples were tested at the Center for Accelerator of Science and Technology (CAST)-NAA laboratory using NAA, while at the University of Texas (UT) USA using ICP-MS and ENAA method. From 12 elements of target, CAST-NAA able to present 11 elements of data analysis. The comparison results shows that the analysis of the K, Mn, Ti and Fe elements from both laboratories have a very good comparison and close one to other. It is known from RSD values and correlation coefficients of the both laboratories analysis results. While observed of the results difference known that the analysis results of Al, Na, K, Fe, V, Mn, Ti, Cr and As elements from both laboratories is not significantly different. From 11 elements were reported, only Zn which have significantly different values for both laboratories. (author)

THE ANALYSIS OF THE GLOBAL LEVEL OF THE ACTIVITY OF A COMPANY ON THE BASE OF THE RESULT INDICATORS WHICH EXPRESS PROFITABILITY

Directory of Open Access Journals (Sweden)

CĂRUNTU CONSTANTIN

2014-02-01

Full Text Available The analysis of the result indicators which express the profitability of a company have an important role in establishing the strategy to be followed especially during the economic and financial crisis. To highlight the performance of a business and determine the efficiency of the use of inputs, it is necessary to quantify and measure the results, and in order to measure the results we use a range of performance indicators. They are part of a philosophy of continuous improvement, as the one introduced by Deming, "Deming Way", which is based on the repetitive application of the following principles: "planning - implementation - control - action". These indicators measure the degree to which the results obtained correspond to the efforts and the planned objectives. The purpose of this article is to analyze a company's performance starting from the outcome indicators of the nature of profit, and for reaching this aim we shall have in view the performance of the following objectives: the dynamic analysis of revenues, expenses and profit, the diagnosis analysis of factorial type of the total profit and of the financial profit at S.C. OMV PETROM S.A..

Information and Communication Technologies (ICT) and Their Relation to Academic Results Indicators in State Public Universities in Mexico

Science.gov (United States)

Arcos-Vega, José L.; Ramiro Marentes, Fabiola; Algravez Uranga, Juan J.

2017-01-01

We present an analysis regarding Information and Communication Technologies (ICT) and their relation with indicators of academic results in bachelor's degree programs offered in state public universities in Mexico. This work is non experimental, cross-sectional, and correlational. The goal is to determine significant relations between variables:…

Danish gynecologists' opinion about hysterectomy on benign indication: results of a survey

DEFF Research Database (Denmark)

Gimbel, Helga; Ottesen, Bent; Tabor, Ann

2002-01-01

AIMS: To survey Danish gynecologists' recommendations concerning hysterectomy and its method for benign diseases. METHODS: A questionnaire of seven clinical cases was sent to all gynecologists in Denmark (n = 450). The gynecologists were asked to recommend one of 14 possible treatments as the mos...

Total-body irradiation - role and indications. Results from the German Registry for Stem Cell Transplantation (DRST)

International Nuclear Information System (INIS)

Heinzelmann, F.; Bamberg, M.; Belka, C.; Ottinger, H.; Mueller, C.H.; Allgaier, S.; Faul, C.

2006-01-01

Background and purpose: total-body irradiation (TBI) is a key part of the conditioning regimen before hematopoietic stem cell transplantation (HSCT). The exact role of TBI as part of the conditioning regimen is largely unclear. In order to determine the relevance of TBI, the status of TBI utilization was analyzed on the basis of a nationwide registry. Material and methods: 14,371 patients (1998-2002) documented in the German Stem Cell Transplantation Registry (DRST) were analyzed regarding TBI utilization prior to autologous or allogeneic transplantation, underlying disorder, type of donor, stem cell source, and size of the treatment center. Results: for autologous HSCT ∝10% of the patients (873/8,167) received TBI, with chronic lymphocytic leukemia (CLL, ∝80%, 171/214) and low-grade non-Hodgkin's lymphoma (l-NHL, ∝35%, 330/929) being the most important disorders. In the allogeneic setting 50% of the patients (2,399/4,904) received TBI, with acute lymphocytic leukemia (ALL, 85%, 794/930), acute myeloid leukemia (AML, 45%, 662/1,487) and chronic myeloid leukemia (CML, 49%, 561/1,156) being the key indications. The type of donor, stem cell source and center size did not strongly influence the use of TBI. Conclusion: TBI has only a limited role for the conditioning prior to autologous HCST. For allogeneic HSCT TBI is widely accepted with no major changes over the observation time. The use of TBI is generally accepted for ALL, whereas approximately half of the patients with CML or AML received TBI. Although a considerably large database was analyzed, no clear determinants for the use of TBI could be distinguished. (orig.)

Total-body irradiation - role and indications. Results from the German Registry for Stem Cell Transplantation (DRST)

Energy Technology Data Exchange (ETDEWEB)

Heinzelmann, F.; Bamberg, M.; Belka, C. [Dept. of Radiation Oncology, Univ. of Tuebingen (Germany); Ottinger, H. [German Registry for Stem Cell Transplantation (DRST) Secretary, Univ. of Essen (Germany); Mueller, C.H.; Allgaier, S. [DRST Datacenter, DRK Bloodbank Center Ulm (Germany); Faul, C. [Dept. of Internal Medicine II, Univ. of Tuebingen (Germany)

2006-04-15

Background and purpose: total-body irradiation (TBI) is a key part of the conditioning regimen before hematopoietic stem cell transplantation (HSCT). The exact role of TBI as part of the conditioning regimen is largely unclear. In order to determine the relevance of TBI, the status of TBI utilization was analyzed on the basis of a nationwide registry. Material and methods: 14,371 patients (1998-2002) documented in the German Stem Cell Transplantation Registry (DRST) were analyzed regarding TBI utilization prior to autologous or allogeneic transplantation, underlying disorder, type of donor, stem cell source, and size of the treatment center. Results: for autologous HSCT {proportional_to}10% of the patients (873/8,167) received TBI, with chronic lymphocytic leukemia (CLL, {proportional_to}80%, 171/214) and low-grade non-Hodgkin's lymphoma (l-NHL, {proportional_to}35%, 330/929) being the most important disorders. In the allogeneic setting 50% of the patients (2,399/4,904) received TBI, with acute lymphocytic leukemia (ALL, 85%, 794/930), acute myeloid leukemia (AML, 45%, 662/1,487) and chronic myeloid leukemia (CML, 49%, 561/1,156) being the key indications. The type of donor, stem cell source and center size did not strongly influence the use of TBI. Conclusion: TBI has only a limited role for the conditioning prior to autologous HCST. For allogeneic HSCT TBI is widely accepted with no major changes over the observation time. The use of TBI is generally accepted for ALL, whereas approximately half of the patients with CML or AML received TBI. Although a considerably large database was analyzed, no clear determinants for the use of TBI could be distinguished. (orig.)

Biometric Indices of Arachis hypogaea Plant Grown in Kutchalli ...

African Journals Online (AJOL)

Kutchalli drilling waste pit materials (WPM) in the Nigerian National Petroleum Corporation, NNPC, exploration site in Borno State of Nigeria was evaluated for systemic toxicity to inhabitants (man, animal and plants) via the food chain. In this experiment, biometric indices were analysed using standard methods. Results ...

Multiband discrete ordinates method: formalism and results

International Nuclear Information System (INIS)

Luneville, L.

1998-06-01

The multigroup discrete ordinates method is a classical way to solve transport equation (Boltzmann) for neutral particles. Self-shielding effects are not correctly treated due to large variations of cross sections in a group (in the resonance range). To treat the resonance domain, the multiband method is introduced. The main idea is to divide the cross section domain into bands. We obtain the multiband parameters using the moment method; the code CALENDF provides probability tables for these parameters. We present our implementation in an existing discrete ordinates code: SN1D. We study deep penetration benchmarks and show the improvement of the method in the treatment of self-shielding effects. (author)

General indicators

International Nuclear Information System (INIS)

2003-01-01

This document summarizes the main 2002 energy indicators for France. A first table lists the evolution of general indicators between 1973 and 2002: energy bill, price of imported crude oil, energy independence, primary and final energy consumption. The main 2002 results are detailed separately for natural gas, petroleum and coal (consumption, imports, exports, production, stocks, prices). (J.S.)

Indications and results of renal biopsy in children: a 36-year experience.

Science.gov (United States)

Santangelo, Luisa; Netti, Giuseppe Stefano; Giordano, Paolo; Carbone, Vincenza; Martino, Marida; Torres, Diletta Domenica; Rossini, Michele; Di Palma, Anna Maria; Gesualdo, Loreto; Giordano, Mario

2018-04-01

This study was conducted to investigate retrospectively the indications for renal biopsy (RB) in native kidneys and to analyze pathological findings in a single tertiary pediatric hospital in Southern Italy for the last 36 years. All patients who underwent RB at our hospital from 1979 to 2014 were included. All renal tissue specimens were studied under light and immunofluorescent microscopy, while electron microscopy was performed only for specific clinical indications. The study group included 213 patients (female 43.2%) who underwent 225 percutaneous native kidney biopsies. Median age was 10.4 years (range 0.6-24 years). The most frequent indication for RB was nephrotic syndrome (44.4%), followed by proteinuria (27.6%), asymptomatic hematuria (17.3%) and acute kidney injury (9.8%). Gross hematuria appeared after biopsy in less than 5% of the patients, but none of them needed blood transfusion. Adequate renal tissue sample was obtained in 95.5% of the renal biopsies. Primary glomerulonephritis (GN) was the most common finding (61.4%), followed by secondary GN (21.4%), tubulointerstitial diseases (3.7%) and hereditary nephropathy (2.8%), while in 10.7% of the cases, normal renal tissues were found. According to histopathological diagnosis, the most common causes of primary GN were IgA nephropathy (20.9%), followed by minimal change disease (18.1%) and focal segmental glomerulosclerosis (11.6%). The epidemiology of glomerular disease in our single-center cohort is similar to that shown in other national and international reports. Moreover, our study shows that percutaneous ultrasound-guided RB is a safe, reliable and effective technique in children.

[Evaluation of Organ Dose Estimation from Indices of CT Dose Using Dose Index Registry].

Science.gov (United States)

Iriuchijima, Akiko; Fukushima, Yasuhiro; Ogura, Akio

Direct measurement of each patient organ dose from computed tomography (CT) is not possible. Most methods to estimate patient organ dose is using Monte Carlo simulation with dedicated software. However, dedicated software is too expensive for small scale hospitals. Not every hospital can estimate organ dose with dedicated software. The purpose of this study was to evaluate the simple method of organ dose estimation using some common indices of CT dose. The Monte Carlo simulation software Radimetrics (Bayer) was used for calculating organ dose and analysis relationship between indices of CT dose and organ dose. Multidetector CT scanners were compared with those from two manufactures (LightSpeed VCT, GE Healthcare; SOMATOM Definition Flash, Siemens Healthcare). Using stored patient data from Radimetrics, the relationships between indices of CT dose and organ dose were indicated as each formula for estimating organ dose. The accuracy of estimation method of organ dose was compared with the results of Monte Carlo simulation using the Bland-Altman plots. In the results, SSDE was the feasible index for estimation organ dose in almost organs because it reflected each patient size. The differences of organ dose between estimation and simulation were within 23%. In conclusion, our estimation method of organ dose using indices of CT dose is convenient for clinical with accuracy.

Interpreting Statistical Significance Test Results: A Proposed New "What If" Method.

Science.gov (United States)

Kieffer, Kevin M.; Thompson, Bruce

As the 1994 publication manual of the American Psychological Association emphasized, "p" values are affected by sample size. As a result, it can be helpful to interpret the results of statistical significant tests in a sample size context by conducting so-called "what if" analyses. However, these methods can be inaccurate…

Enhanced tamper indicator

Science.gov (United States)

Garcia, Anthony R.; Johnston, Roger G.

2003-07-08

The present invention provides an apparatus and method whereby the reliability and tamper-resistance of tamper indicators can be improved. A flexible connector may be routed through a latch for an enclosure such as a door or container, and the free ends of the flexible connector may be passed through a first locking member and firmly attached to an insert through the use of one or more attachment members such as set screws. A second locking member may then be assembled in interlocking relation with the first locking member to form an interlocked assembly around the insert. The insert may have one or more sharp projections extending toward the first or second locking member so that any compressive force applied in an attempt to disassemble the interlocked assembly results in permanent, visible damage to the first or second locking member.

RP-HPLC Method Development and Validation for the Determination and Stability Indicative Studies of Montelukast in Bulk and its Pharmaceutical Formulations

Directory of Open Access Journals (Sweden)

A. Patnaik

2012-01-01

Full Text Available A simple, precise, accurate, economical and reproducible HPLC method for estimation of montelukast in tablet dosage form has been developed. Quantitative HPLC was performed with Shimadzu LC2010c HT with Winchrom Software with UV-Visible detector (SPD-IOA, PUMP (LC-IOAT and (LC-IOATvp. Phenomenex C8, 5 μm, 25 cm × 4.6 mm i.d. column was used in the study. The mobile phase of ACN: Acetate buffer= 6.5:3.5 of pH 3 were used in this study. The conditions optimized were: flow rate (1 mL/minute, wavelength (222 nm and run time was 20 min. Retention time was found to be 3.08 min. The linearity was found to be in the concentration range of 10-100 μg/mL. The developed method was evaluated in the assay of commercially available tablet moni containing 10 mg of montelukast. The amount of drug in tablet was found to be 10.34 mg/tab for the brand. Results of analysis were validated statistically and by recovery studies. The recovery studies 99.67% was indicative of the accuracy of proposed method. The precision was calculated as repeatability, inter and intraday variation (%RSD for the drug. By using the method, stability of the drug has been studied.

Stability-Indicating RP-HPLC Method for Analysis of Paracetamol and Tramadol in a Pharmaceutical Dosage Form

Directory of Open Access Journals (Sweden)

Rajesh M. Kamble

2012-01-01

Full Text Available A simple, isocratic, rapid and accurate reversed phase high performance liquid chromatography method was developed for the quantitative determination of paracetamol and tramadol in commercial medicinal tablets. The chromatographic separation was achieved on an Intersil C18 (250 mm x 4.6 mm, 5μm column using water pH 3.4 with orthophosphoric acid: methanol (60:40, v/v as a mobile phase, and UV detection at 228 nm. The chromatographic resolutions between paracetamol and tramadol were found greater than five. The linear range for paracetamol and tramadol were 20.8–39.0 μg/ml and 2.4–4.5 μg/ ml was obtained with correlation coefficients ≥0.999 for each analyte. The retention time were found to be 2.1 and 3.9 min for tramadol and paracetamol respectively. Paracetamol and tramadol was subjected to stress conditions (hydrolysis (acid, base oxidation, photolysis and thermal degradation and the stressed samples were analyzed by use of the method. The major degradation was observed in acid and minor in base, thermal, oxidation and photolysis. The forced degradation studies prove the stability indicating power of the method.

Baseline results of the first malaria indicator survey in Iran at the health facility level

Directory of Open Access Journals (Sweden)

Taghizadeh-Asl Rahim

2011-10-01

Full Text Available Abstract Background Malaria continues to be a global public health challenge, particularly in developing countries. Delivery of prompt and effective diagnosis and treatment of malaria cases, detection of malaria epidemics within one week of onset and control them in less than a month, regular disease monitoring and operational classification of malaria are among the major responsibilities of the national malaria programme. The study was conducted to determine these indicators at the different level of primary health care facilities in malaria-affected provinces of Iran Methods In this survey, data was collected from 223 health facilities including health centres, malaria posts, health houses and hospitals as well as the profile of all 5, 836 recorded malaria cases in these facilities during the year preceding the survey. Descriptive statistics (i.e. frequencies, percentages were used to summarize the results and Chi square test was used to analyse data. Results All but one percent of uncomplicated cases took appropriate and correctly-dosed of anti-malarial drugs in accordance to the national treatment guideline. A larger proportion of patients [85.8%; 95% CI: 84.8 - 86.8] were also given complete treatment including anti-relapse course, in line with national guidelines. About one third [35.0%; 95% CI: 33.6 - 36.4] of uncomplicated malaria cases were treated more than 48 hours after first symptoms onset. Correspondingly, half of severe malaria cases took recommended anti-malarial drugs for severe or complicated disease more than 48 hours of onset of first symptoms. The latter cases had given regular anti-malarial drugs promptly. The majority of malaria epidemics [97%; 95% CI: 90.6 - 100] in study areas were detected within one week of onset, but only half of epidemics were controlled within four weeks of detection. Just half of target districts had at least one health facility/emergency site with adequate supply and equipment stocks. Nevertheless

Craniometric Indices of Nigeria Skulls

OpenAIRE

Orish CN; Ibeachu PC

2016-01-01

Introduction: Craniometric indices show the percentage relationship between different dimensions. It is an important parameter for classification of race and sex of individuals of unknown identity. This study was undertaken to determine the craniometric indices of gnathic, palatal, orbital, cranial and nasal indices of Nigerian skulls. Materials and Methods: One hundred adult dry skulls, (78 males, and 22 females) free from damage and deformities from eleven Departments of Anatomy in Nige...

A method for data handling numerical results in parallel OpenFOAM simulations

International Nuclear Information System (INIS)

nd Vasile Pârvan Ave., 300223, TM Timişoara, Romania, alin.anton@cs.upt.ro (Romania))" data-affiliation=" (Faculty of Automatic Control and Computing, Politehnica University of Timişoara, 2nd Vasile Pârvan Ave., 300223, TM Timişoara, Romania, alin.anton@cs.upt.ro (Romania))" >Anton, Alin; th Mihai Viteazu Ave., 300221, TM Timişoara (Romania))" data-affiliation=" (Center for Advanced Research in Engineering Science, Romanian Academy – Timişoara Branch, 24th Mihai Viteazu Ave., 300221, TM Timişoara (Romania))" >Muntean, Sebastian

2015-01-01

Parallel computational fluid dynamics simulations produce vast amount of numerical result data. This paper introduces a method for reducing the size of the data by replaying the interprocessor traffic. The results are recovered only in certain regions of interest configured by the user. A known test case is used for several mesh partitioning scenarios using the OpenFOAM toolkit ® [1]. The space savings obtained with classic algorithms remain constant for more than 60 Gb of floating point data. Our method is most efficient on large simulation meshes and is much better suited for compressing large scale simulation results than the regular algorithms

A method for data handling numerical results in parallel OpenFOAM simulations

Energy Technology Data Exchange (ETDEWEB)

Anton, Alin [Faculty of Automatic Control and Computing, Politehnica University of Timişoara, 2" n" d Vasile Pârvan Ave., 300223, TM Timişoara, Romania, alin.anton@cs.upt.ro (Romania); Muntean, Sebastian [Center for Advanced Research in Engineering Science, Romanian Academy – Timişoara Branch, 24" t" h Mihai Viteazu Ave., 300221, TM Timişoara (Romania)

2015-12-31

Parallel computational fluid dynamics simulations produce vast amount of numerical result data. This paper introduces a method for reducing the size of the data by replaying the interprocessor traffic. The results are recovered only in certain regions of interest configured by the user. A known test case is used for several mesh partitioning scenarios using the OpenFOAM toolkit{sup ®}[1]. The space savings obtained with classic algorithms remain constant for more than 60 Gb of floating point data. Our method is most efficient on large simulation meshes and is much better suited for compressing large scale simulation results than the regular algorithms.

Stress degradation studies of Telmisartan and Metoprolol extended release tablets by a validated stability indicating reverse phase-high performance liquid chromatography method

Directory of Open Access Journals (Sweden)

Kabeer Ahmed Shaikh

2014-01-01

Full Text Available Background and Aim: A sensitive reverse phase high-performance liquid chromatographic method has been developed for the simultaneous determination of Telimisartan and Metoprolol in tablet dosage form. Materials and Method: The chromatographic separation was achieved on Inertsil ODS 3V, 150 x 4.6 mm, 5μ analytical column. Mobile phase consisting of mobile phase A- 0.05M sodium dihydrogen phosphate buffer pH 3.0 and mobile phase B-Acetonitrile, with gradient program time in min /Mobile phase B% 0/22, 4/45, 6/45,18/22, 20/22. Detector was set at 222nm. Results and Conclusion: The described method shows excellent linearity over a range of 80-2 μg mL−1 for Telmisartan and 100-4 μg mL−1 for Metoprolol. The correlation coefficient for Telmisartan is 0.9998 and Metoprolol is 0.9999. The proposed method was found to be suitable for determination of Telmisartan and Metoprolol in tablet dosage form. Forced degradation of the drug product was conducted in accordance with the ICH guideline. Acidic, basic, hydrolytic, oxidative, thermal and photolytic degradation was used to assess the stability indicating power of the method. The drug product was found to be stable in acid, oxidation, thermal and photolytic stress condition and found degradation in base hydrolysis stress condition.

Application of spectrophotometric, densitometric, and HPLC techniques as stability indicating methods for determination of Zaleplon in pharmaceutical preparations

Science.gov (United States)

Metwally, Fadia H.; Abdelkawy, M.; Abdelwahab, Nada S.

2007-12-01

Spectrophotometric, spectrodensitometric and HPLC are stability indicating methods described for determination of Zaleplon in pure and dosage forms. As Zaleplon is easily degradable, the proposed techniques in this manuscript are adopted for its determination in presence of its alkaline degradation product, namely N-[4-(3-cyano-pyrazolo[1,5a]pyridin-7-yl)-phenyl]- N-ethyl-acetamide. These approaches are successfully applied to quantify Zaleplon using the information included in the absorption spectra of appropriate solutions. The second derivative (D 2) spectrophotometric method, allows determination of Zaleplon without interference of its degradate at 235.2 nm using 0.01N HCl as a solvent with obedience to Beer's law over a concentration range of 1-10 μg ml -1 with mean percentage recovery 100.24 ± 0.86%. The first derivative of the ratio spectra ( 1DD) based on the simultaneous use of ( 1DD) and measurement at 241.8 nm using the same solvent and over the same concentration range as (D 2) spectrophotometric method, with mean percentage recovery 99.9 ± 1.07%. The spectrodensitometric analysis allows the separation and quantitation of Zaleplon from its degradate on silica gel plates using chloroform:acetone:ammonia solution (9:1:0.2 by volume) as a mobile phase. This method depends on quantitave densitometric evaluation of thin layer chromatogram of Zaleplon at 338 nm over a concentration range of 0.2-1 μg band -1, with mean percentage recovery 99.73 ± 1.35. Also a reversed-phase liquid chromatographic method using 5-C8 (22 cm × 4.6 mm i.d. 5 μm particle size) column was described and validated for quantitation of Zaleplon using acetonitrile:deionised water (35:65, v/v) as a mobile phase using Paracetamol as internal standard and a flow rate of 1.5 ml min -1 with UV detection of the effluent at 232 nm at ambient temperature over a concentration range of 2-20 μg ml -1 with mean percentage recovery 100.19 ± 1.15%. The insignificance difference of the proposed

Novel indicators of recreational water quality and swimming-associated illness

Science.gov (United States)

In the United States and elsewhere, recreational water quality is monitored for fecal indicator bacteria to help prevent swimming-associated illnesses. Standard methods to measure these bacteria take at least 24 hours to obtain results. Molecular approaches such as quantitative p...

Biodiversity patterns along ecological gradients: unifying β-diversity indices.

Science.gov (United States)

Szava-Kovats, Robert C; Pärtel, Meelis

2014-01-01

Ecologists have developed an abundance of conceptions and mathematical expressions to define β-diversity, the link between local (α) and regional-scale (γ) richness, in order to characterize patterns of biodiversity along ecological (i.e., spatial and environmental) gradients. These patterns are often realized by regression of β-diversity indices against one or more ecological gradients. This practice, however, is subject to two shortcomings that can undermine the validity of the biodiversity patterns. First, many β-diversity indices are constrained to range between fixed lower and upper limits. As such, regression analysis of β-diversity indices against ecological gradients can result in regression curves that extend beyond these mathematical constraints, thus creating an interpretational dilemma. Second, despite being a function of the same measured α- and γ-diversity, the resultant biodiversity pattern depends on the choice of β-diversity index. We propose a simple logistic transformation that rids beta-diversity indices of their mathematical constraints, thus eliminating the possibility of an uninterpretable regression curve. Moreover, this transformation results in identical biodiversity patterns for three commonly used classical beta-diversity indices. As a result, this transformation eliminates the difficulties of both shortcomings, while allowing the researcher to use whichever beta-diversity index deemed most appropriate. We believe this method can help unify the study of biodiversity patterns along ecological gradients.

Combining Diffusion Models and Macroeconomic Indicators with a Modified Genetic Programming Method: Implementation in Forecasting the Number of Mobile Telecommunications Subscribers in OECD Countries

Directory of Open Access Journals (Sweden)

Konstantinos Salpasaranis

2014-01-01

Full Text Available This paper proposes a modified Genetic Programming method for forecasting the mobile telecommunications subscribers’ population. The method constitutes an expansion of the hybrid Genetic Programming (hGP method improved by the introduction of diffusion models for technological forecasting purposes in the initial population, such as the Logistic, Gompertz, and Bass, as well as the Bi-Logistic and LogInLog. In addition, the aforementioned functions and models expand the function set of hGP. The application of the method in combination with macroeconomic indicators such as Gross Domestic Product per Capita (GDPpC and Consumer Prices Index (CPI leads to the creation of forecasting models and scenarios for medium- and long-term level of predictability. The forecasting module of the program has also been improved with the multi-levelled use of the statistical indices as fitness functions and model selection indices. The implementation of the modified-hGP in the datasets of mobile subscribers in the Organisation for Economic Cooperation and Development (OECD countries shows very satisfactory forecasting performance.

Reticulocyte maturity indices in iron deficiency anemia

Directory of Open Access Journals (Sweden)

Muriel Wollmann

2014-01-01

Full Text Available Objective: The aim of this study was to analyze the reticulocyte maturity indices (low, medium, and high fluorescence ratios in iron deficient 1- to 6-year-old children, and identify the prevalence of iron deficiency anemia in this population. Methods: The present study included 39 subjects, divided into two groups: control subjects (n = 33, and subjects with iron deficiency anemia (n = 6. The results were analyzed by Student's t-test for comparison of means. Differences were considered significant when two-tailed p-value < 0.05. Results: Subjects with iron deficiency anemia presented increases in the proportion of mean (10.3 ± 4.7% vs. 6.0 ± 3.4%; p-value = 0.003, and high fluorescence reticulocytes (2.3 ± 0.87% vs. 0.9 ± 0.9%; p-value = 0.03 compared to the control group. The prevalence of anemia in this population was 15% (n = 6. Conclusion: The indices related to immaturity of reticulocytes are higher in the presence of iron deficiency, thus demonstrating a deficiency in the raw material to form hemoglobin and are, therefore, possible early markers of iron deficiency and anemia. We emphasize the need to standardize these indices for use in clinical practice and lab test results.

A Stability-Indicating HPLC-DAD Method for Determination of Ferulic Acid into Microparticles: Development, Validation, Forced Degradation, and Encapsulation Efficiency

Directory of Open Access Journals (Sweden)

Jessica Mendes Nadal

2015-01-01

Full Text Available A simple stability-indicating HPLC-DAD method was validated for the determination of ferulic acid (FA in polymeric microparticles. Chromatographic conditions consisted of a RP C18 column (250 mm × 4.60 mm, 5 μm, 110 Å using a mixture of methanol and water pH 3.0 (48 : 52 v/v as mobile phase at a flow rate of 1.0 mL/min with UV detection at 320 nm. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of quantification, limit of detection, accuracy, precision, and robustness provided suitable results regarding all parameters investigated. The calibration curve was linear in the concentration range of 10.0–70.0 μg/mL with a correlation coefficient >0.999. Precision (intraday and interday was demonstrated by a relative standard deviation lower than 2.0%. Accuracy was assessed by the recovery test of FA from polymeric microparticles (99.02% to 100.73%. Specificity showed no interference from the components of polymeric microparticles or from the degradation products derived from acidic, basic, and photolytic conditions. In conclusion, the method is suitable to be applied to assay FA as bulk drug and into polymeric microparticles and can be used for studying its stability and degradation kinetics.

State-of-charge indication in portable applications

NARCIS (Netherlands)

Pop, V.; Bergveld, H.J.; Notten, P.H.L.; Regtien, Paulus P.L.

2005-01-01

The known methods of state-of-charge (SoC) indication in portable applications are not accurate enough under all practical conditions. The method presented in this paper aims at designing and testing an SoC indication system capable of predicting the remaining capacity of the battery and the

State-of-Charge Indication in Portable Applications

NARCIS (Netherlands)

Pop, V.; Bergveld, H.J.; Notten, P.H.L.; Regtien, Paulus P.L.

2005-01-01

The known methods of state-of-charge (SoC) indication in portable applications are not accurate enough under all practical conditions. The method presented in this paper aims at designing and testing an SoC indication system capable of predicting the remaining capacity of the battery and the

State-of-charge indication for portable applications

NARCIS (Netherlands)

Pop, V.; Bergveld, H.J.; Notten, P.H.L.; Regtien, P.P.L.

2005-01-01

The known methods of state-of-charge (SoC) indication in portable applications are not accurate enough under all practical conditions. The method presented in this paper aims at designing and testing an SoC indication system capable of predicting the remaining capacity of the battery and the

Indications, techniques and results of postoperative brachytherapy in cancer of the oral cavity

International Nuclear Information System (INIS)

Pernot, M.; Aletti, P.; Carolus, J.M.; Marquis, I.; Hoffstetter, S.; Maaloul, F.; Peiffert, D.; Lapeyre, M.; Luporsi, E.; Marchal, C.; Noeel, A.; Bey, P.

1995-01-01

Purpose/objective: We tried to reduce the number of local recurrences after surgery and external beam irradiation (EBI) in carcinoma of the oral cavity, when margins were positive or close. Material and methods: From 1980 to 1992, we treated 97 cases of carcinomas of the oral cavity by postoperative brachytherapy. Surgery was combined with EBI+brachytherapy in 51 cases and with brachytherapy alone in 46 cases. We treated 29 T1, 34 T2, 30 T3T4 and four Tx (73% were N0 at first examination and 23% had positive nodes). The type of surgery is analysed. Brachytherapy was performed in one or two planes along the surgical scar. If the mandibular rim was resected, especially when the tongue or the remaining floor were sutured to the internal face of the inferior lip or to the buccal mucosa, the bridge technique was used. To decrease the dose to the inferior part of the mandible, the bridge was modified thanks to experimental dosimetry. Results: At 5 years, the local control (LC) is 89%, the locoregional control (LRC) 82%, the specific survival (SS) 74% and the overall survival (OS) 67%. Complications: We noted 19% of grade 1 (minor), 12% of grade 2 (moderate) and 6% of grade 3 (major) complications. Conclusion: Compared with the results of the literature, we think that postoperative brachytherapy can improve classical radiosurgical results in selected cases with a risk of local recurrence

The Value of Mixed Methods Research: A Mixed Methods Study

Science.gov (United States)

McKim, Courtney A.

2017-01-01

The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

QbD-Based Development and Validation of a Stability-Indicating HPLC Method for Estimating Ketoprofen in Bulk Drug and Proniosomal Vesicular System.

Science.gov (United States)

Yadav, Nand K; Raghuvanshi, Ashish; Sharma, Gajanand; Beg, Sarwar; Katare, Om P; Nanda, Sanju

2016-03-01

The current studies entail systematic quality by design (QbD)-based development of simple, precise, cost-effective and stability-indicating high-performance liquid chromatography method for estimation of ketoprofen. Analytical target profile was defined and critical analytical attributes (CAAs) were selected. Chromatographic separation was accomplished with an isocratic, reversed-phase chromatography using C-18 column, pH 6.8, phosphate buffer-methanol (50 : 50v/v) as a mobile phase at a flow rate of 1.0 mL/min and UV detection at 258 nm. Systematic optimization of chromatographic method was performed using central composite design by evaluating theoretical plates and peak tailing as the CAAs. The method was validated as per International Conference on Harmonization guidelines with parameters such as high sensitivity, specificity of the method with linearity ranging between 0.05 and 250 µg/mL, detection limit of 0.025 µg/mL and quantification limit of 0.05 µg/mL. Precision was demonstrated using relative standard deviation of 1.21%. Stress degradation studies performed using acid, base, peroxide, thermal and photolytic methods helped in identifying the degradation products in the proniosome delivery systems. The results successfully demonstrated the utility of QbD for optimizing the chromatographic conditions for developing highly sensitive liquid chromatographic method for ketoprofen. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Diamagnetic measurements on ISX-B: method and results

International Nuclear Information System (INIS)

Neilson, G.H.

1983-10-01

A diamagnetic loop is used on the ISX-B tokamak to measure the change in toroidal magnetic flux, sigma phi, caused by finite plasma current and perpendicular pressure. From this measurement, the perpendicular poloidal beta β/sub I perpendicular to/ is determined. The principal difficulty encountered is in identifying and making corrections for various noise components which appear in the measured flux. These result from coupling between the measuring loops and the toroidal and poloidal field windings, both directly and through currents induced in the vacuum vessel and coils themselves. An analysis of these couplings is made and techniques for correcting them developed. Results from the diamagnetic measurement, employing some of these correction techniques, are presented and compared with other data. The obtained values of β/sub I perpendicular to/ agree with those obtained from the equilibrium magnetic analysis (β/sub IΔ/) in ohmically heated plasmas, indicating no anisotropy. However, with 0.3 to 2.0 MW of tangential neutral beam injection, β/sub IΔ/ is consistently greater than β/sub I pependicular to/ and qualitatively consistent with the formation of an anisotropic ion velocity distribution and with toroidal rotation. Quantitatively, the difference between β/sub IΔ/ and β/sub I perpendicular to/ is more than can be accounted for on the basis of the usual classical fast ion calculations and spectroscopic rotation measurements

Key performance indicators for stroke from the Ministry of Health of Brazil: benchmarking and indicator parameters

Directory of Open Access Journals (Sweden)

Marcos C Lange

Full Text Available ABSTRACT The present study aimed to analyze the stroke units in two centers for the key performance indicators (KPIs required by the Ministry of Health in Brazil. Methods All 16 KPIs were analyzed, including the percentage of patients admitted to the stroke unit, venous thromboembolism prophylaxis in the first 48 hours after admission, pneumonia and hospital mortality due to stroke, and hospital discharge on antithrombotic therapy in patients without cardioembolic mechanism. Results Both centers admitted over 80% of the patients in their stroke unit. The incidence of venous thromboembolism prophylaxis was > 85%, that of in-hospital pneumonia was 70%. Conclusion Our results suggest using the parameters of all of the 16 KPIs required by the Ministry of Health of Brazil, and the present results for the two stroke units for future benchmarking.

Selection method and device for reactor core performance calculation input indication

International Nuclear Information System (INIS)

Yuto, Yoshihiro.

1994-01-01

The position of a reactor core component on a reactor core map, which is previously designated and optionally changeable, is displayed by different colors on a CRT screen by using data of a data file incorporating results of a calculation for reactor core performance, such as incore thermal limit values. That is, an operator specifies the kind of the incore component to be sampled on a menu screen, to display the position of the incore component which satisfies a predetermined condition on the CRT screen by different colors in the form of a reactor core map. The position for the reactor core component displayed on the CRT screen by different colors is selected and designated on the screen by a touch panel, a mouse or a light pen, thereby automatically outputting detailed data of evaluation for the reactor core performance of the reactor core component at the indicated position. Retrieval of coordinates of fuel assemblies to be data sampled and input of the coordinates and demand for data sampling can be conducted at once by one menu screen. (N.H.)

Comparison results on preconditioned SOR-type iterative method for Z-matrices linear systems

Science.gov (United States)

Wang, Xue-Zhong; Huang, Ting-Zhu; Fu, Ying-Ding

2007-09-01

In this paper, we present some comparison theorems on preconditioned iterative method for solving Z-matrices linear systems, Comparison results show that the rate of convergence of the Gauss-Seidel-type method is faster than the rate of convergence of the SOR-type iterative method.

Selection and Evaluation of Chemical Indicators for Waste Stream Identification

Science.gov (United States)

DeVita, W. M.; Hall, J.

2015-12-01

Human and animal wastes pose a threat to the quality of groundwater, surface water and drinking water. This is especially of concern for private and public water supplies in agricultural areas of Wisconsin where land spreading of livestock waste occurs on thin soils overlaying fractured bedrock. Current microbial source tracking (MST) methods for source identification requires the use of polymerase chain reaction (PCR) techniques. Due to cost, these tests are often not an option for homeowners, municipalities or state agencies with limited resources. The Water and Environmental Analysis Laboratory sought to develop chemical methods to provide lower cost processes to determine sources of fecal waste using fecal sterols, pharmaceuticals (human and veterinary) and human care/use products in ground and surface waters using solid phase extraction combined with triple quadrupole mass spectrometry. The two separate techniques allow for the detection of fecal sterol and other chemical markers in the sub part per billion-range. Fecal sterol ratios from published sources were used to evaluate drinking water samples and wastewater from onsite waste treatment systems and municipal wastewater treatment plants. Pharmaceuticals and personal care products indicative of human waste included: acetaminophen, caffeine, carbamazepine, cotinine, paraxanthine, sulfamethoxazole, and the artificial sweeteners; acesulfame, saccharin, and sucralose. The bovine antibiotic sulfamethazine was also targeted. Well water samples with suspected fecal contamination were analyzed for fecal sterols and PPCPs. Results were compared to traditional MST results from the Wisconsin State Laboratory of Hygiene. Chemical indicators were found in 6 of 11 drinking water samples, and 5 of 11 were in support of MST results. Lack of detection of chemical indicators in samples contaminated with fecal waste supports the need for confirmatory methods and advancement of chemical indicator detection technologies.

Environmental Public Health Indicators Impact Report: Data and methods that support environmental public health decision-making by communities

Science.gov (United States)

This report presents the results of twenty competitively funded Science-To-Achieve-Results (STAR) grants in EPA's Environmental Public Health Indicators (EPHI) research program. The grantsdirectly supported health interventions, informed policy and decision-making, and improved t...

Key performance indicators in hospital based on balanced scorecard model

Directory of Open Access Journals (Sweden)

Hamed Rahimi

2017-01-01

Full Text Available Introduction: Performance measurement is receiving increasing verification all over the world. Nowadays in a lot of organizations, irrespective of their type or size, performance evaluation is the main concern and a key issue for top administrators. The purpose of this study is to organize suitable key performance indicators (KPIs for hospitals’ performance evaluation based on the balanced scorecard (BSC. Method: This is a mixed method study. In order to identify the hospital’s performance indicators (HPI, first related literature was reviewed and then the experts’ panel and Delphi method were used. In this study, two rounds were needed for the desired level of consensus. The experts rated the importance of the indicators, on a five-point Likert scale. In the consensus calculation, the consensus percentage was calculated by classifying the values 1-3 as not important (0 and 4-5 to (1 as important. Simple additive weighting technique was used to rank the indicators and select hospital’s KPIs. The data were analyzed by Excel 2010 software. Results: About 218 indicators were obtained from a review of selected literature. Through internal expert panel, 77 indicators were selected. Finally, 22 were selected for KPIs of hospitals. Ten indicators were selected in internal process perspective and 5, 4, and 3 indicators in finance, learning and growth, and customer, respectively. Conclusion: This model can be a useful tool for evaluating and comparing the performance of hospitals. However, this model is flexible and can be adjusted according to differences in the target hospitals. This study can be beneficial for hospital administrators and it can help them to change their perspective about performance evaluation.

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

A Stability-Indicating HPLC-DAD Method for Determination of Stiripentol: Development, Validation, Kinetics, Structure Elucidation and Application to Commercial Dosage Form

Directory of Open Access Journals (Sweden)

Hany W. Darwish

2014-01-01

Full Text Available A rapid, simple, sensitive, and accurate isocratic reversed-phase stability-indicating high performance liquid chromatography method has been developed and validated for the determination of stiripentol and its degradation product in its bulk form and pharmaceutical dosage form. Chromatographic separation was achieved on a Symmetry C18 column and quantification was achieved using photodiode array detector (DAD. The method was validated in accordance with the ICH requirements showing specificity, linearity (r2=0.9996, range of 1–25 μg/mL, precision (relative standard deviation lower than 2%, accuracy (mean recovery 100.08±1.73, limits of detection and quantitation (LOD = 0.024 and LOQ = 0.081 μg/mL, and robustness. Stiripentol was subjected to various stress conditions and it has shown marked stability under alkaline hydrolytic stress conditions, thermal, oxidative, and photolytic conditions. Stiripentol degraded only under acidic conditions, forming a single degradation product which was well resolved from the pure drug with significantly different retention time values. This degradation product was characterized by 1H-NMR and 13C-NMR spectroscopy as well as ion trap mass spectrometry. The results demonstrated that the method would have a great value when applied in quality control and stability studies for stiripentol.

School results and access test results as indicators of first-year performance at university

Directory of Open Access Journals (Sweden)

A Bothma

2004-06-01

Full Text Available The goals set by the National Plan for Higher Education, the fact that many schools are still severely disadvantaged as well as far-reaching changes in the school system demand that South African universities urgently reconsider their admission procedures. Redesigning admission procedures calls for a thorough understanding of the interrelationships between school marks, results in existing access tests and first-year university performance. These interrelationships were statistically investigated in the case of the 1999, 2000 and 2001 intake groups, who were compelled to write access tests before being admitted to Stellenbosch University. The results of this investigation confirm an alarming degree of unpreparedness among many prospective students regarding what is expected of them at university. This is aggravated by school marks creating a totally unrealistic expectation of performance in the first year at university. It is emphasised that schools and authorities dealing with admission of prospective students at universities should be cognisant of the findings reported here. Furthermore, the statistical analyses demonstrate several novel techniques for investigating the interrelationship between school marks, access test results and university performance.

Developing a Model for Assessing Public Culture Indicators at Universities

Directory of Open Access Journals (Sweden)

Meisam Latifi

2015-06-01

Full Text Available The present study is aimed to develop a model for assessing public culture at universities and evaluating its indicators at public universities in Mashhad. The research follows an exploratory mixed approach. Research strategies in qualitative and quantitative sections are thematic networks analysis and descriptive- survey method, respectively. In the qualitative section, document analysis and semi-structured interviews with cultural experts are used as research tools. In this section, targeted sampling is carried out. In the quantitative section, a questionnaire which is developed based on the findings of the qualitative section is used as the research tool. Research population of the quantitative section consists of all the students who are admitted to public universities in Mashhad between 2009 and 2012. Sample size was calculated according to Cochran’s formula. Stratified sampling was used to select the sample. The results of the qualitative section led to the identification of 44 basic themes which are referred to as the micro indicators. These themes were clustered into similar groups. Then, 10 organizer themes were identified and recognized as macro indicators. In the next phase, importance factor of each indicator is determined according to the AHP method. The results of the qualitative assessment of indicators at public universities of Mashhad show that the overall cultural index declines during the years the student attends the university. Additionally, the highest correlation exists between national identity and revolutionary identity. The only negative correlations are observed between family and two indicators including social capital and cultural consumption. The results of the present study can be used to assess the state of public culture among university students and also be considered as a basis for assessing cultural planning.

Factor analysis improves the selection of prescribing indicators

DEFF Research Database (Denmark)

Rasmussen, Hanne Marie Skyggedal; Søndergaard, Jens; Sokolowski, Ineta

2006-01-01

OBJECTIVE: To test a method for improving the selection of indicators of general practitioners' prescribing. METHODS: We conducted a prescription database study including all 180 general practices in the County of Funen, Denmark, approximately 472,000 inhabitants. Principal factor analysis was us...... appropriate and inappropriate prescribing, as revealed by the correlation of the indicators in the first factor. CONCLUSION: Correlation and factor analysis is a feasible method that assists the selection of indicators and gives better insight into prescribing patterns....

Percutaneous placement of self-expandable metallic biliary stents in malignant extrahepatic strictures: indications of transpapillary and suprapapillary methods

Energy Technology Data Exchange (ETDEWEB)

Lee, Deok Hee; Yu, Jeong Sik; Kim, Ki Hwang [Yonsei University College of Medicine, Seoul (Korea, Republic of); Hwang, Jae Cheol [Ulsan University Hospital, Seoul (Korea, Republic of)

2000-06-01

To compare the efficacy of suprapapillary and transpapillary methods of transhepatic biliary metallic stent placement in malignant biliary strictures and to specify the indications of each method applied. Stents were placed in 59 patients. Strictures were categorized as type A (within 3 cm of the ampulla, n = 27), type B (over 3 cm from ampulla, n = 7), type C (within 3 cm of the bending portion, n = 9), or type D (over 3 cm above the bending portion, n=16). The stenting method was suprapapillary in 34 cases and transpapillary in 25. The rates of initial and long-term patency and of early recurrence were compared. Initial patency rates for the suprapapillary and transpapillary methods were 1/7 (14.3%) and 20/20 (100%) respectively for type A (p < 0.0001), 4/5 (80.0%) and 2/2 for type B, 3/7 (42.9%) and 2/2 for type C, and 15/16 (93.8%) and 0/0 for type D. Early recurrence rates were 7/30 (23.3%) using the suprapapillary method and 4/29 (13.8%) using the transpapillary method (p = 0.51). The long-term patency rate did not differ significantly according to either type (p = 0.37) or method (p = 0 . 6 2 ). For good initial patency, the transpapillary method is recommended for strictures of the distal extrahepatic duct near the ampulla and just above the bending portion. Long-term patency is not influenced by the stenting method employed.

Development and validation of stability indicating method for the quantitative determination of venlafaxine hydrochloride in extended release formulation using high performance liquid chromatography

Directory of Open Access Journals (Sweden)

Jaspreet Kaur

2010-01-01

Full Text Available Objective : Venlafaxine,hydrochloride is a structurally novel phenethyl bicyclic antidepressant, and is usually categorized as a serotonin-norepinephrine reuptake inhibitor (SNRI but it has been referred to as a serotonin-norepinephrine-dopamine reuptake inhibitor. It inhibits the reuptake of dopamine. Venlafaxine HCL is widely prescribed in the form of sustained release formulations. In the current article we are reporting the development and validation of a fast and simple stability indicating, isocratic high performance liquid chromatographic (HPLC method for the determination of venlafaxine hydrochloride in sustained release formulations. Materials and Methods : The quantitative determination of venlafaxine hydrochloride was performed on a Kromasil C18 analytical column (250 x 4.6 mm i.d., 5 μm particle size with 0.01 M phosphate buffer (pH 4.5: methanol (40: 60 as a mobile phase, at a flow rate of 1.0 ml/min. For HPLC methods, UV detection was made at 225 nm. Results : During method validation, parameters such as precision, linearity, accuracy, stability, limit of quantification and detection and specificity were evaluated, which remained within acceptable limits. Conclusions : The method has been successfully applied for the quantification and dissolution profiling of Venlafaxine HCL in sustained release formulation. The method presents a simple and reliable solution for the routine quantitative analysis of Venlafaxine HCL.

Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study.

Science.gov (United States)

Berenguera, Anna; Pujol-Ribera, Enriqueta; Violan, Concepció; Romaguera, Amparo; Mansilla, Rosa; Giménez, Albert; Ascaso, Carlos; Almeda, Jesús

2011-07-28

The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases:1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary prevention activities. The results could help to homogeneously

Radiologic percutaneous gastrostomy and gastroenterostomy: Indications, results, and difficulties

International Nuclear Information System (INIS)

Casola, G.; Van Sonnenberg, E.; Sukthankar, R.; Varney, R.A.; Stavas, J.; Cohen, M.; Christensen, R.A.; Wittich, G.R.

1987-01-01

This paper summarizes the authors' experience with 130 radiologic percutaneous gastrostomies (PG) and percutaneous gastroenterostomies (PGE). Procedures were accomplished successfully in 127 of 130 candidates. One case was unsuccessful and two were unfeasible. Indications were for feeding, decompression, or both. Underlying diseases included neurologic disorders, head and neck and esophageal tumors, pelvic and abdominal malignancies, trauma, and a variety of other diseases. Various guidance systems, techniques, and catheters were used. Complications occurred in 8%, most being minor. Three patients were operated on after PG/PGE-two had peritonitis, one due to tube dislodgment. Difficulties were encountered at different portions of the procedure. During catheter insertion the following problems were most common: (1) the access route was difficult because of overlying colon, (2) inability to insert a nasogastric tube in patients with esophageal carcinoma or large head and neck tumors, (3) inability to keep the stomach distended in patients with increased motility and those with surgical gastroenterostomies (Billroth I or II), (4) high position of the residual stomach in patients with hemigastrectomy, (5) the presence of ascites or peritoneal tumor anterior to the stomach in patients with ovarian carcinoma, and (6) tenting or herniation of the anterior wall of the stomach during dilatation. Difficulties that were encountered following catheter insertion included (1) chemical peritonitis from leakage of gastric juices, (2) peritonities from leakage of gastric feedings, (3) leakage around the skin entry site in patients with ascites, (4) catheters backing out and forming an intraperitorial loop, (5) catheters kinking and becoming occluded, and (6) catheters being pulled out

Antiandrogen monotherapy: indications and results

DEFF Research Database (Denmark)

Iversen, Peter

2002-01-01

monotherapy is generally well tolerated, with a predictable side-effect profile. The most common side effects are male breast pain and gynecomastia. Emerging evidence also supports the use of bicalutamide 150 mg, both as immediate monotherapy and as adjuvant therapy in early stage (localized or locally...

Radical prostatectomy. Results and indications

International Nuclear Information System (INIS)

Jacqmin, D.

1997-01-01

Radical prostatectomy is the surgical curative treatment of localized prostate cancer. The survival is good in young patients (<70) with T2 N0M0 tumors and more than 10 year's life expectancy. Side-effects are urinary incontinence, impotence and anastomosis stricture. Quality of life should be considered as an important factor for the choice of the patient between radical prostatectomy, radiotherapy and follow-up. (author)

Quantifying the measurement uncertainty of results from environmental analytical methods.

Science.gov (United States)

Moser, J; Wegscheider, W; Sperka-Gottlieb, C

2001-07-01

The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.

The Crossmatch/Issue Ratio:  Use of a Novel Quality Indicator and Results of an International Survey on RBC Crossmatching and Issuing Practices

DEFF Research Database (Denmark)

Yazer, Mark H; Alcantara, Ramir; Beizai, Pouneh

2016-01-01

OBJECTIVES: To understand the worldwide scope of RBC crossmatching and issuing practices and measure efficiency using a novel quality indicator, the crossmatch/issue (C/I) ratio. METHODS: An electronic survey was disseminated to hospital transfusion services collecting details about RBC...... crossmatching and issuing practices. Respondents were asked to enumerate the number of RBCs crossmatched and issued at their institutions during the 2014 calendar year to calculate the C/I ratio. RESULTS: Fifty-two survey responses were received, mostly from North American transfusion services (28/52, 54......%). The electronic crossmatch was the most common technique (n = 29), and most respondents performed the crossmatch at the time that an order for RBCs was received in the transfusion service (even if an order to issue the RBCs was not received). Data to calculate the C/I ratio were supplied by 22 respondents...

Stability indicating high performance thin-layer chromatographic method for simultaneous estimation of pantoprazole sodium and itopride hydrochloride in combined dosage form.

Science.gov (United States)

Bageshwar, Deepak; Khanvilkar, Vineeta; Kadam, Vilasrao

2011-11-01

A specific, precise and stability indicating high-performance thin-layer chromatographic method for simultaneous estimation of pantoprazole sodium and itopride hydrochloride in pharmaceutical formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F 254 as the stationary phase. The solvent system consisted of methanol:water:ammonium acetate; 4.0:1.0:0.5 (v/v/v). This system was found to give compact and dense spots for both itopride hydrochloride ( R f value of 0.55±0.02) and pantoprazole sodium ( R f value of 0.85±0.04). Densitometric analysis of both drugs was carried out in the reflectance-absorbance mode at 289 nm. The linear regression analysis data for the calibration plots showed a good linear relationship with R 2 =0.9988±0.0012 in the concentration range of 100-400 ng for pantoprazole sodium. Also, the linear regression analysis data for the calibration plots showed a good linear relationship with R 2 =0.9990±0.0008 in the concentration range of 200-1200 ng for itopride hydrochloride. The method was validated for specificity, precision, robustness and recovery. Statistical analysis proves that the method is repeatable and selective for the estimation of both the said drugs. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating method.

Similarity indices I: what do they measure

International Nuclear Information System (INIS)

Johnston, J.W.

1976-11-01

A method for estimating the effects of environmental effusions on ecosystems is described. The characteristics of 25 similarity indices used in studies of ecological communities were investigated. The type of data structure, to which these indices are frequently applied, was described as consisting of vectors of measurements on attributes (species) observed in a set of samples. A general similarity index was characterized as the result of a two-step process defined on a pair of vectors. In the first step an attribute similarity score is obtained for each attribute by comparing the attribute values observed in the pair of vectors. The result is a vector of attribute similarity scores. These are combined in the second step to arrive at the similarity index. The operation in the first step was characterized as a function, g, defined on pairs of attribute values. The second operation was characterized as a function, F, defined on the vector of attribute similarity scores from the first step. Usually, F was a simple sum or weighted sum of the attribute similarity scores. It is concluded that similarity indices should not be used as the test statistic to discriminate between two ecological communities

Similarity indices I: what do they measure.

Energy Technology Data Exchange (ETDEWEB)

Johnston, J.W.

1976-11-01

A method for estimating the effects of environmental effusions on ecosystems is described. The characteristics of 25 similarity indices used in studies of ecological communities were investigated. The type of data structure, to which these indices are frequently applied, was described as consisting of vectors of measurements on attributes (species) observed in a set of samples. A general similarity index was characterized as the result of a two-step process defined on a pair of vectors. In the first step an attribute similarity score is obtained for each attribute by comparing the attribute values observed in the pair of vectors. The result is a vector of attribute similarity scores. These are combined in the second step to arrive at the similarity index. The operation in the first step was characterized as a function, g, defined on pairs of attribute values. The second operation was characterized as a function, F, defined on the vector of attribute similarity scores from the first step. Usually, F was a simple sum or weighted sum of the attribute similarity scores. It is concluded that similarity indices should not be used as the test statistic to discriminate between two ecological communities.

Investigation of error estimation method of observational data and comparison method between numerical and observational results toward V and V of seismic simulation

International Nuclear Information System (INIS)

Suzuki, Yoshio; Kawakami, Yoshiaki; Nakajima, Norihiro

2017-01-01

The method to estimate errors included in observational data and the method to compare numerical results with observational results are investigated toward the verification and validation (V and V) of a seismic simulation. For the method to estimate errors, 144 literatures for the past 5 years (from the year 2010 to 2014) in the structure engineering field and earthquake engineering field where the description about acceleration data is frequent are surveyed. As a result, it is found that some processes to remove components regarded as errors from observational data are used in about 30% of those literatures. Errors are caused by the resolution, the linearity, the temperature coefficient for sensitivity, the temperature coefficient for zero shift, the transverse sensitivity, the seismometer property, the aliasing, and so on. Those processes can be exploited to estimate errors individually. For the method to compare numerical results with observational results, public materials of ASME V and V Symposium 2012-2015, their references, and above 144 literatures are surveyed. As a result, it is found that six methods have been mainly proposed in existing researches. Evaluating those methods using nine items, advantages and disadvantages for those methods are arranged. The method is not well established so that it is necessary to employ those methods by compensating disadvantages and/or to search for a solution to a novel method. (author)

New Stability Indicating RP-HPLC Method for the Estimation of Cefpirome Sulphate in Bulk and Pharmaceutical Dosage Forms.

Science.gov (United States)

Rao, Kareti Srinivasa; Kumar, Keshar Nargesh; Joydeep, Datta

2011-01-01

A simple stability indicating reversed-phase HPLC method was developed and subsequently validated for estimation of Cefpirome sulphate (CPS) present in pharmaceutical dosage forms. The proposed RP-HPLC method utilizes a LiChroCART-Lichrosphere100, C18 RP column (250 mm × 4mm × 5 μm) in an isocratic separation mode with mobile phase consisting of methanol and water in the proportion of 50:50 % (v/v), at a flow rate 1ml/min, and the effluent was monitored at 270 nm. The retention time of CPS was 2.733 min and its formulation was exposed to acidic, alkaline, photolytic, thermal and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. The described method was linear over a range of 0.5-200μg/ml. The percentage recovery was 99.46. F-test and t-test at 95% confidence level were used to check the intermediate precision data obtained under different experimental setups; the calculated value was found to be less than the critical value.

Buildings Indicators for Sustainable Mobility: the District of Naples

Directory of Open Access Journals (Sweden)

Pietro D'Amico

2011-07-01

Full Text Available Mobility is a major component in ensuring freedom of movement and good quality of life. It is strictly associated to the concept of sustainability, considering that more than 70% of European citizens live in urban areas.Traffic volumes and congestion, air quality, noise pollution, consumption of non renewable resources, greenhouse gas emissions, social exclusion and urban sprawl are significant challenges to achieve sustainable urban mobility. This is one of the most important goals of the Coordination Plan of the District of Naples (PTCP. In this paper, we show the process of research, selection, valuation, weighting and synthesis of a set of indicators to monitor sustainable mobility during the realization process of the PTCP.Two urban areas lacking infrastructure connections are considered: North Naples and Giuglianese. According to the Planning Code, the GIS Office and the Planning Office are responsible for choosing the set of indicators and its application, and for evaluating if the goals of the PTCP are achievable and if corrective actions should be undertaken as well.The Environmental Report attached to the Plan sets down to link each topic of the plan to a unique index resulting from a set of specific indicators. One of the results of this study was the selection of 22 indicators for sustainable mobility.They were the outcome of the intersection between the lists available in scientific literature and the databases available for the District of Naples. As set down by the PTCP Planning Code, a top down approach was adopted Therefore indicators were selected by technicians. However, a bottom up approach, i.e. citizenship and stakeholders select indicators, would have resulted in a more transparent process. This study applied a rating method named allocation of budget to weight indicators. Weights determined the importance of each indicator compared to the others.After the weighting procedure, the aggregation of indicators into a single

Image restoration by the method of convex projections: part 2 applications and numerical results.

Science.gov (United States)

Sezan, M I; Stark, H

1982-01-01

The image restoration theory discussed in a previous paper by Youla and Webb [1] is applied to a simulated image and the results compared with the well-known method known as the Gerchberg-Papoulis algorithm. The results show that the method of image restoration by projection onto convex sets, by providing a convenient technique for utilizing a priori information, performs significantly better than the Gerchberg-Papoulis method.

A Pragmatic Smoothing Method for Improving the Quality of the Results in Atomic Spectroscopy

Science.gov (United States)

Bennun, Leonardo

2017-07-01

A new smoothing method for the improvement on the identification and quantification of spectral functions based on the previous knowledge of the signals that are expected to be quantified, is presented. These signals are used as weighted coefficients in the smoothing algorithm. This smoothing method was conceived to be applied in atomic and nuclear spectroscopies preferably to these techniques where net counts are proportional to acquisition time, such as particle induced X-ray emission (PIXE) and other X-ray fluorescence spectroscopic methods, etc. This algorithm, when properly applied, does not distort the form nor the intensity of the signal, so it is well suited for all kind of spectroscopic techniques. This method is extremely effective at reducing high-frequency noise in the signal much more efficient than a single rectangular smooth of the same width. As all of smoothing techniques, the proposed method improves the precision of the results, but in this case we found also a systematic improvement on the accuracy of the results. We still have to evaluate the improvement on the quality of the results when this method is applied over real experimental results. We expect better characterization of the net area quantification of the peaks, and smaller Detection and Quantification Limits. We have applied this method to signals that obey Poisson statistics, but with the same ideas and criteria, it could be applied to time series. In a general case, when this algorithm is applied over experimental results, also it would be required that the sought characteristic functions, required for this weighted smoothing method, should be obtained from a system with strong stability. If the sought signals are not perfectly clean, this method should be carefully applied

Statin prescribing according to gender, age and indication

DEFF Research Database (Denmark)

Wallach-Kildemoes, Helle; Støvring, Henrik; Holme Hansen, Ebba

2016-01-01

RATIONALES, AIMS AND OBJECTIVES: The increasing dispensing of statins has raised concern about the appropriateness of prescribing to various population groups. We aimed to (1) investigate incident and prevalent statin prescribing according to indication, gender and age and (2) relate prescribing...... patterns to evidence on beneficial and adverse effects. METHODS: A cohort of Danish inhabitants (n = 4 424 818) was followed in nationwide registries for dispensed statin prescriptions and hospital discharge information. We calculated incidence rates (2005-2009), prevalence trends (2000-2010) and absolute...... numbers of statin users according to register proxies for indication, gender and age. RESULTS: In 2010, the prevalence became highest for ages 75-84 and was higher in men than women (37% and 33%, respectively). Indication-specific incidences and prevalences peaked at ages around 65-70, but in myocardial...

A validated stability-indicating RP-HPLC method for levofloxacin in the presence of degradation products, its process related impurities and identification of oxidative degradant.

Science.gov (United States)

Lalitha Devi, M; Chandrasekhar, K B

2009-12-05

The objective of current study was to develop a validated specific stability indicating reversed-phase liquid chromatographic method for the quantitative determination of levofloxacin as well as its related substances determination in bulk samples, pharmaceutical dosage forms in the presence of degradation products and its process related impurities. Forced degradation studies were performed on bulk sample of levofloxacin as per ICH prescribed stress conditions using acid, base, oxidative, water hydrolysis, thermal stress and photolytic degradation to show the stability indicating power of the method. Significant degradation was observed during oxidative stress and the degradation product formed was identified by LCMS/MS, slight degradation in acidic stress and no degradation was observed in other stress conditions. The chromatographic method was optimized using the samples generated from forced degradation studies and the impurity spiked solution. Good resolution between the peaks corresponds to process related impurities and degradation products from the analyte were achieved on ACE C18 column using the mobile phase consists a mixture of 0.5% (v/v) triethyl amine in sodium dihydrogen orthophosphate dihydrate (25 mM; pH 6.0) and methanol using a simple linear gradient. The detection was carried out at 294 nm. The limit of detection and the limit of quantitation for the levofloxacin and its process related impurities were established. The stressed test solutions were assayed against the qualified working standard of levofloxacin and the mass balance in each case was in between 99.4 and 99.8% indicating that the developed LC method was stability indicating. Validation of the developed LC method was carried out as per ICH requirements. The developed LC method was found to be suitable to check the quality of bulk samples of levofloxacin at the time of batch release and also during its stability studies (long term and accelerated stability).

Depth-Sizing Technique for Crack Indications in Steam Generator Tubing

International Nuclear Information System (INIS)

Cho, Chan Hee; Lee, Hee Jeong; Kim, Hong Deok

2009-01-01

The nuclear power plants have been safely operated by plugging the steam generator tubes which have the crack indications. Tube rupture events can occur if analysts fail to detect crack indications during in-service inspection. There are various types of crack indication in steam generator tubes and they have been detected by the eddy current test. The integrity assessment should be performed using the crack-sizing results from eddy current data when the crack indication is detected. However, it is not easy to evaluate the crack-depth precisely and consistently due to the complexity of the methods. The current crack-sizing methods were reviewed in this paper and the suitable ones were selected through the laboratory tests. The retired steam generators of Kori Unit 1 were used for this study. The round robin tests by the domestic qualified analysts were carried out and the statistical models were introduced to establish the appropriate depth-sizing techniques. It is expected that the proposed techniques in this study can be utilized in the Steam Generator Management Program

Evaluation of an open access echocardiography service in the Netherlands: a mixed methods study of indications, outcomes, patient management and trends

Directory of Open Access Journals (Sweden)

Streppel Marjolijn

2010-02-01

Full Text Available Abstract Background In our region (Eastern South Limburg, The Netherlands an open access echocardiography service started in 2002. It was the first service of this kind in The Netherlands. Our study aims were: (1 to evaluate demand for the service, participation, indications, echocardiography outcomes, and management by the general practitioner (GP; (2 to analyse changes in indications and outcomes over the years. Methods (1 Data from GP request forms, echocardiography reports and a retrospective GP questionnaire on management (response rate 83% of 625 consecutive patients (Dec. 2002 - March 2007 were analysed cross-sectionally. (2 For the analysis of changes over the years, data from GP request forms and echocardiography reports of the first and last 250 patients that visited the service between Dec. 2002 and Feb. 2008 (n = 1001 were compared. Results The echocardiography service was used by 81% of the regional GPs. On average, a GP referred one patient per year to the service. Intended indications for the service were dyspnoea (32%, cardiac murmur (59%, and peripheral oedema (17%. Of the other indications (22%, one-third was for evaluation of suspected left ventricular hypertrophy (LVH. Expected outcomes were left ventricular dysfunction (LVD (43%, predominantly diastolic and valve disease (25%. We also found a high proportion of LVH (50%. Only 24% of all echocardiograms showed no relevant disease. The GP followed the cardiologist's advice to refer the patient for further evaluation in 71%. In recent patients, more echocardiography requests were done for 'cardiac murmur' and 'other' indications, but less for 'dyspnoea'. The proportions of patients with LVD, LVH and valve disease decreased and the proportion of patients with no relevant disease increased. The number of advices by the cardiologists increased. Conclusion Overall, GPs used the open access echocardiography service efficiently (i.e. with a high chance of finding relevant pathology

A method for modeling laterally asymmetric proton beamlets resulting from collimation

Energy Technology Data Exchange (ETDEWEB)

Gelover, Edgar; Wang, Dongxu; Flynn, Ryan T.; Hyer, Daniel E. [Department of Radiation Oncology, University of Iowa, 200 Hawkins Drive, Iowa City, Iowa 52242 (United States); Hill, Patrick M. [Department of Human Oncology, University of Wisconsin, 600 Highland Avenue, Madison, Wisconsin 53792 (United States); Gao, Mingcheng; Laub, Steve; Pankuch, Mark [Division of Medical Physics, CDH Proton Center, 4455 Weaver Parkway, Warrenville, Illinois 60555 (United States)

2015-03-15

Purpose: To introduce a method to model the 3D dose distribution of laterally asymmetric proton beamlets resulting from collimation. The model enables rapid beamlet calculation for spot scanning (SS) delivery using a novel penumbra-reducing dynamic collimation system (DCS) with two pairs of trimmers oriented perpendicular to each other. Methods: Trimmed beamlet dose distributions in water were simulated with MCNPX and the collimating effects noted in the simulations were validated by experimental measurement. The simulated beamlets were modeled analytically using integral depth dose curves along with an asymmetric Gaussian function to represent fluence in the beam’s eye view (BEV). The BEV parameters consisted of Gaussian standard deviations (sigmas) along each primary axis (σ{sub x1},σ{sub x2},σ{sub y1},σ{sub y2}) together with the spatial location of the maximum dose (μ{sub x},μ{sub y}). Percent depth dose variation with trimmer position was accounted for with a depth-dependent correction function. Beamlet growth with depth was accounted for by combining the in-air divergence with Hong’s fit of the Highland approximation along each axis in the BEV. Results: The beamlet model showed excellent agreement with the Monte Carlo simulation data used as a benchmark. The overall passing rate for a 3D gamma test with 3%/3 mm passing criteria was 96.1% between the analytical model and Monte Carlo data in an example treatment plan. Conclusions: The analytical model is capable of accurately representing individual asymmetric beamlets resulting from use of the DCS. This method enables integration of the DCS into a treatment planning system to perform dose computation in patient datasets. The method could be generalized for use with any SS collimation system in which blades, leaves, or trimmers are used to laterally sharpen beamlets.

A method for modeling laterally asymmetric proton beamlets resulting from collimation

International Nuclear Information System (INIS)

Gelover, Edgar; Wang, Dongxu; Flynn, Ryan T.; Hyer, Daniel E.; Hill, Patrick M.; Gao, Mingcheng; Laub, Steve; Pankuch, Mark

2015-01-01

Purpose: To introduce a method to model the 3D dose distribution of laterally asymmetric proton beamlets resulting from collimation. The model enables rapid beamlet calculation for spot scanning (SS) delivery using a novel penumbra-reducing dynamic collimation system (DCS) with two pairs of trimmers oriented perpendicular to each other. Methods: Trimmed beamlet dose distributions in water were simulated with MCNPX and the collimating effects noted in the simulations were validated by experimental measurement. The simulated beamlets were modeled analytically using integral depth dose curves along with an asymmetric Gaussian function to represent fluence in the beam’s eye view (BEV). The BEV parameters consisted of Gaussian standard deviations (sigmas) along each primary axis (σ x1 ,σ x2 ,σ y1 ,σ y2 ) together with the spatial location of the maximum dose (μ x ,μ y ). Percent depth dose variation with trimmer position was accounted for with a depth-dependent correction function. Beamlet growth with depth was accounted for by combining the in-air divergence with Hong’s fit of the Highland approximation along each axis in the BEV. Results: The beamlet model showed excellent agreement with the Monte Carlo simulation data used as a benchmark. The overall passing rate for a 3D gamma test with 3%/3 mm passing criteria was 96.1% between the analytical model and Monte Carlo data in an example treatment plan. Conclusions: The analytical model is capable of accurately representing individual asymmetric beamlets resulting from use of the DCS. This method enables integration of the DCS into a treatment planning system to perform dose computation in patient datasets. The method could be generalized for use with any SS collimation system in which blades, leaves, or trimmers are used to laterally sharpen beamlets

A method for modeling laterally asymmetric proton beamlets resulting from collimation

Science.gov (United States)

Gelover, Edgar; Wang, Dongxu; Hill, Patrick M.; Flynn, Ryan T.; Gao, Mingcheng; Laub, Steve; Pankuch, Mark; Hyer, Daniel E.

2015-01-01

Purpose: To introduce a method to model the 3D dose distribution of laterally asymmetric proton beamlets resulting from collimation. The model enables rapid beamlet calculation for spot scanning (SS) delivery using a novel penumbra-reducing dynamic collimation system (DCS) with two pairs of trimmers oriented perpendicular to each other. Methods: Trimmed beamlet dose distributions in water were simulated with MCNPX and the collimating effects noted in the simulations were validated by experimental measurement. The simulated beamlets were modeled analytically using integral depth dose curves along with an asymmetric Gaussian function to represent fluence in the beam’s eye view (BEV). The BEV parameters consisted of Gaussian standard deviations (sigmas) along each primary axis (σx1,σx2,σy1,σy2) together with the spatial location of the maximum dose (μx,μy). Percent depth dose variation with trimmer position was accounted for with a depth-dependent correction function. Beamlet growth with depth was accounted for by combining the in-air divergence with Hong’s fit of the Highland approximation along each axis in the BEV. Results: The beamlet model showed excellent agreement with the Monte Carlo simulation data used as a benchmark. The overall passing rate for a 3D gamma test with 3%/3 mm passing criteria was 96.1% between the analytical model and Monte Carlo data in an example treatment plan. Conclusions: The analytical model is capable of accurately representing individual asymmetric beamlets resulting from use of the DCS. This method enables integration of the DCS into a treatment planning system to perform dose computation in patient datasets. The method could be generalized for use with any SS collimation system in which blades, leaves, or trimmers are used to laterally sharpen beamlets. PMID:25735287

External beam radiotherapy for head and neck carcinomas with preservation of parotid function: indications, techniques and long term results

International Nuclear Information System (INIS)

Ding-Jen, Lee; Fairbanks, Robert; Lee, Frank C.

1995-01-01

Purpose/Objective: To reduce the incidence of radiotherapy induced xerostomia, we developed techniques of external beam irradiation with preservation of parotid function for patients with early to intermediate stage carcinomas of the head and neck. This analysis reports the efficacy of our methods. Materials and Methods: From 1985 to 1993, 42 patients with early to intermediate stage (T 1-3 N 0-2 M 0 ) head and neck carcinomas received a course of external beam radiotherapy. There were 13 patients with carcinoma of the oropharynx, 26 with carcinomas of the oral cavity and 3 with carcinomas of the hypopharynx (lateral wall). 7 patients received a course of definitive radiotherapy (66 to 72 Gy), while 35 patients received a course of postoperative radiotherapy (60-66 Gy). The fraction size was 2 Gy per day. In terms of treatment planning, the primary site (plus a margin) and the ipsilateral neck were covered by the irradiation volume. The ipsilateral parotid gland was within the treatment volume while the contralateral parotid gland was not. The most frequently used field arrangement was a paired wedge fields with an AP (medially just across the mid-line) and an ipsilateral posterior oblique field (usually 30 deg. off vertical axis with a spinal cord block). Multiple level of contours were taken and transmission blocks were used to improve dose homogeneity. In all patients, the ipsilateral parotid gland (and the neck) was irradiated while the contralateral parotid gland (and the neck) was not. Results: With a median follow up of 4 years (ranged from 1.5 to 9 years), only one patient developed symptomatic xerostomia. None had radiation induced dental caries. No patient developed recurrent disease in the contralateral neck. The local control rate was (38(42)) (90%) in the primary site and(41(42)) (98%) in the ipsilateral neck. Conclusion: With appropriate treatment planning, external beam irradiation with parotid function preservation can be achieved. Our results

Ammonium vanadate titrimetric method for determination of micro amount uranium in rock and soil by using vanadate-gold indicator

International Nuclear Information System (INIS)

Li Yucheng.

1990-01-01

A new vanadate-gold indicator was successfully applied to the ammonium vanadate titrimetric method for determination of micro amount uranium in rock and soil. Uranium in 0.1g of sample is reduced by titanium trichloride in phosphoric acid. Excessive Ti (III) and other low-valent ions are oxidized by sodium nitrite, while the complex of uranium (IV)-phosphate is not oxidized. Excessive nitrite is destroyed by urea. When the concentration of phosphoric acid is 22-24 % , adding two drops of vanadate-gold indicator, uranium (IV) is titrated by standardized ammonium vanadate solution (T = 0.02-20gU/ml) and the end-point is judged by a violet-red color appearance

[Adverse events management. Methods and results of a development project].

Science.gov (United States)

Rabøl, Louise Isager; Jensen, Elisabeth Brøgger; Hellebek, Annemarie H; Pedersen, Beth Lilja

2006-11-27

This article describes the methods and results of a project in the Copenhagen Hospital Corporation (H:S) on preventing adverse events. The aim of the project was to raise awareness about patients' safety, test a reporting system for adverse events, develop and test methods of analysis of events and propagate ideas about how to prevent adverse events. H:S developed an action plan and a reporting system for adverse events, founded an organization and developed an educational program on theories and methods of learning from adverse events for both leaders and employees. During the three-year period from 1 January 2002 to 31 December 2004, the H:S staff reported 6011 adverse events. In the same period, the organization completed 92 root cause analyses. More than half of these dealt with events that had been optional to report, the other half events that had been mandatory to report. The number of reports and the front-line staff's attitude towards reporting shows that the H:S succeeded in founding a safety culture. Future work should be centred on developing and testing methods that will prevent adverse events from happening. The objective is to suggest and complete preventive initiatives which will help increase patient safety.

A Kinematic Study of Prosodic Structure in Articulatory and Manual Gestures: Results from a Novel Method of Data Collection

Directory of Open Access Journals (Sweden)

Jelena Krivokapić

2017-03-01

Full Text Available The primary goal of this work is to examine prosodic structure as expressed concurrently through articulatory and manual gestures. Specifically, we investigated the effects of phrase-level prominence (Experiment 1 and of prosodic boundaries (Experiments 2 and 3 on the kinematic properties of oral constriction and manual gestures. The hypothesis guiding this work is that prosodic structure will be similarly expressed in both modalities. To test this, we have developed a novel method of data collection that simultaneously records speech audio, vocal tract gestures (using electromagnetic articulometry and manual gestures (using motion capture. This method allows us, for the first time, to investigate kinematic properties of body movement and vocal tract gestures simultaneously, which in turn allows us to examine the relationship between speech and body gestures with great precision. A second goal of the paper is thus to establish the validity of this method. Results from two speakers show that manual and oral gestures lengthen under prominence and at prosodic boundaries, indicating that the effects of prosodic structure extend beyond the vocal tract to include body movement.1

Development and validation of a stability-indicating HPLC-UV method for the determination of triamcinolone acetonide and its degradation products in an ointment formulation

NARCIS (Netherlands)

van Heugten, A J P; Boer, W.; de Vries, W S; Markesteijn, C M A; Vromans, H

2018-01-01

A stability indicating high performance liquid chromatography method has been developed for the determination of triamcinolone acetonide (TCA) and its main degradation products in ointment formulations. The method, based on extensive stress testing using metal salts, azobisisobutyronitrile, acid,

Validation of newly developed and redesigned key indicator methods for assessment of different working conditions with physical workloads based on mixed-methods design: a study protocol.

Science.gov (United States)

Klussmann, Andre; Liebers, Falk; Brandstädt, Felix; Schust, Marianne; Serafin, Patrick; Schäfer, Andreas; Gebhardt, Hansjürgen; Hartmann, Bernd; Steinberg, Ulf

2017-08-21

The impact of work-related musculoskeletal disorders is considerable. The assessment of work tasks with physical workloads is crucial to estimate the work-related health risks of exposed employees. Three key indicator methods are available for risk assessment regarding manual lifting, holding and carrying of loads; manual pulling and pushing of loads; and manual handling operations. Three further KIMs for risk assessment regarding whole-body forces, awkward body postures and body movement have been developed de novo. In addition, the development of a newly drafted combined method for mixed exposures is planned. All methods will be validated regarding face validity, reliability, convergent validity, criterion validity and further aspects of utility under practical conditions. As part of the joint project MEGAPHYS (multilevel risk assessment of physical workloads), a mixed-methods study is being designed for the validation of KIMs and conducted in companies of different sizes and branches in Germany. Workplaces are documented and analysed by observations, applying KIMs, interviews and assessment of environmental conditions. Furthermore, a survey among the employees at the respective workplaces takes place with standardised questionnaires, interviews and physical examinations. It is intended to include 1200 employees at 120 different workplaces. For analysis of the quality criteria, recommendations of the COSMIN checklist (COnsensus-based Standards for the selection of health Measurement INstruments) will be taken into account. The study was planned and conducted in accordance with the German Medical Professional Code and the Declaration of Helsinki as well as the German Federal Data Protection Act. The design of the study was approved by ethics committees. We intend to publish the validated KIMs in 2018. Results will be published in peer-reviewed journals, presented at international meetings and disseminated to actual users for practical application. © Article

Trojan Horse Method: Recent Results

International Nuclear Information System (INIS)

Pizzone, R. G.; Spitaleri, C.

2008-01-01

Owing the presence of the Coulomb barrier at astrophysically relevant kinetic energies, it is very difficult, or sometimes impossible to measure astrophysical reaction rates in laboratory. This is why different indirect techniques are being used along with direct measurements. The THM is unique indirect technique allowing one measure astrophysical rearrangement reactions down to astrophysical relevant energies. The basic principle and a review of the main application of the Trojan Horse Method are presented. The applications aiming at the extraction of the bare S b (E) astrophysical factor and electron screening potentials U e for several two body processes are discussed

Evaluating Living Standard Indicators

Directory of Open Access Journals (Sweden)

Birčiaková Naďa

2015-09-01

Full Text Available This paper deals with the evaluation of selected available indicators of living standards, divided into three groups, namely economic, environmental, and social. We have selected six countries of the European Union for analysis: Bulgaria, the Czech Republic, Hungary, Luxembourg, France, and Great Britain. The aim of this paper is to evaluate indicators measuring living standards and suggest the most important factors which should be included in the final measurement. We have tried to determine what factors influence each indicator and what factors affect living standards. We have chosen regression analysis as our main method. From the study of factors, we can deduce their impact on living standards, and thus the value of indicators of living standards. Indicators with a high degree of reliability include the following factors: size and density of population, health care and spending on education. Emissions of carbon dioxide in the atmosphere also have a certain lower degree of reliability.

A Comparison of Four Indices for Combining Distance and Dose Differences

International Nuclear Information System (INIS)

Thomas, Simon J.; Cowley, Ian R.

2012-01-01

Purpose: When one is comparing two dose distributions, a number of methods have been published to combine dose difference and distance to agreement into a single measure. Some have been defined as pass/fail indices and some as numeric indices. We show that the pass/fail indices can all be used to derive numeric indices, and we compare the results of using these indices to evaluate one-dimensional (1D) and three-dimensional (3D) dose distributions, with the aim of selecting the most appropriate index for use in different circumstances. Methods and Materials: The indices compared are the gamma index, the kappa index, the index in International Commission on Radiation Units and Measurements Report 83, and a box index. Comparisons are made for 1D and 3D distributions. The 1D distribution is chosen to have a variety of dose gradients. The 3D distribution is taken from a clinical treatment plan. The effect of offsetting distributions by known distances and doses is studied. Results: The International Commission on Radiation Units and Measurements Report 83 index causes large discontinuities unless the dose gradient cutoff is set to equal the ratio of the dose tolerance to the distance tolerance. If it is so set, it returns identical results to the kappa index. Where the gradient is very high or very low, all the indices studied in this article give similar results for the same tolerance values. For moderate gradients, they differ, with the box index being the least strict, followed by the gamma index, and with the kappa index being the most strict. Conclusions: If the clinical tolerances are much greater than the uncertainties of the measuring system, the kappa index should be used, with tolerance values determined by the clinical tolerances. In cases where the uncertainties of the measuring system dominate, the box index will be best able to determine errors in the delivery system.

A new predictive indicator for development of pressure ulcers in bedridden patients based on common laboratory tests results.

Science.gov (United States)

Hatanaka, N; Yamamoto, Y; Ichihara, K; Mastuo, S; Nakamura, Y; Watanabe, M; Iwatani, Y

2008-04-01

Various scales have been devised to predict development of pressure ulcers on the basis of clinical and laboratory data, such as the Braden Scale (Braden score), which is used to monitor activity and skin conditions of bedridden patients. However, none of these scales facilitates clinically reliable prediction. To develop a clinical laboratory data-based predictive equation for the development of pressure ulcers. Subjects were 149 hospitalised patients with respiratory disorders who were monitored for the development of pressure ulcers over a 3-month period. The proportional hazards model (Cox regression) was used to analyse the results of 12 basic laboratory tests on the day of hospitalisation in comparison with Braden score. Pressure ulcers developed in 38 patients within the study period. A Cox regression model consisting solely of Braden scale items showed that none of these items contributed to significantly predicting pressure ulcers. Rather, a combination of haemoglobin (Hb), C-reactive protein (CRP), albumin (Alb), age, and gender produced the best model for prediction. Using the set of explanatory variables, we created a new indicator based on a multiple logistic regression equation. The new indicator showed high sensitivity (0.73) and specificity (0.70), and its diagnostic power was higher than that of Alb, Hb, CRP, or the Braden score alone. The new indicator may become a more useful clinical tool for predicting presser ulcers than Braden score. The new indicator warrants verification studies to facilitate its clinical implementation in the future.

LEADING WITH LEADING INDICATORS

International Nuclear Information System (INIS)

PREVETTE, S.S.

2005-01-01

This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites

Sustainability Index with Integrated Indicator Dependencies

Directory of Open Access Journals (Sweden)

Sabine Wagenhals

2014-06-01

Full Text Available Sustainability is a growing concern worldwide. While companies used to focus on financial performance, now the focus has shifted to considering envi- ronmental and social performance as well. This trend is not only based on ‘image’, but recent research has proven that a complex approach regarding sustainability could significantly increase a company’s performance. The selection of sustainability indicators as well as the development of sustainabil- ity frameworks has been analysed by researchers already. The authors argue that interdependencies exist between different sustainability indicators and concepts. To address this issue, the fuzzy set method has been used and integrated into as- sessment methods, making it possible to develop a sustainability index which is able to consider the dependencies of the integrated variables. The proposed method can prove that indicator dependencies have a significant influence on the sustain - ability performance of a company and therefore on its overall performance.

Development and Validation of a Stability-Indicating HPLC Method for the Simultaneous Determination of Florfenicol and Flunixin Meglumine Combination in an Injectable Solution

Directory of Open Access Journals (Sweden)

Nidal Batrawi

2017-01-01

Full Text Available The combination of the powerful antimicrobial agent florfenicol and the nonsteroidal anti-inflammatory flunixin meglumine is used for the treatment of bovine respiratory disease (BRD and control of BRD-associated pyrexia, in beef and nonlactating dairy cattle. This study describes the development and validation of an HPLC-UV method for the simultaneous determination of florfenicol and flunixin, in an injectable preparation with a mixture of excipients. The proposed RP-HPLC method was developed by a reversed phase- (RP- C18e (250 mm × 4.6 mm, 5 μm column at room temperature, with an isocratic mobile phase of acetonitrile and water mixture, and pH was adjusted to 2.8 using diluted phosphoric acid, a flow rate of 1.0 mL/min, and ultraviolet detection at 268 nm. The stability-indicating method was developed by exposing the drugs to stress conditions of acid and base hydrolysis, oxidation, photodegradation, and thermal degradation; the obtained degraded products were successfully separated from the APIs. This method was validated in accordance with FDA and ICH guidelines and showed excellent linearity, accuracy, precision, specificity, robustness, LOD, LOQ, and system suitability results within the acceptance criteria.