Analysis of effects of extension teaching methods on farmers' level of ...

African Journals Online (AJOL)

This study analyzed the effects of extension teaching methods used by Ogun State (Nigeria) Agricultural Development Programme's extension agents on farmers' level of production in maize and cassava. The sample included 210 randomly selected farmers, comprising adopters and non-adopters of introduced agricultural ...

Inertial subsystem functional and design requirements for the orbiter (Phase B extension baseline)

Science.gov (United States)

Flanders, J. H.; Green, J. P., Jr.

1972-01-01

The design requirements use the Phase B extension baseline system definition. This means that a GNC computer is specified for all command control functions instead of a central computer communicating with the ISS through a databus. Forced air cooling is used instead of cold plate cooling.

Tracking Maneuvering Group Target with Extension Predicted and Best Model Augmentation Method Adapted

Directory of Open Access Journals (Sweden)

Linhai Gan

2017-01-01

Full Text Available The random matrix (RM method is widely applied for group target tracking. The assumption that the group extension keeps invariant in conventional RM method is not yet valid, as the orientation of the group varies rapidly while it is maneuvering; thus, a new approach with group extension predicted is derived here. To match the group maneuvering, a best model augmentation (BMA method is introduced. The existing BMA method uses a fixed basic model set, which may lead to a poor performance when it could not ensure basic coverage of true motion modes. Here, a maneuvering group target tracking algorithm is proposed, where the group extension prediction and the BMA adaption are exploited. The performance of the proposed algorithm will be illustrated by simulation.

International requirements for life extension of nuclear power plants

International Nuclear Information System (INIS)

Wernicke, Robert

2009-01-01

Lifetime extension or long-term operation of nuclear facilities are topics of great international significance against the backdrop of a fleet of nuclear power plants of which many have reached 2/3 of their planned life. The article deals with the conditions for, and the specific requirements of, seeking long-term operation of nuclear power plants as established internationally and on the basis of IAEA collections. Technically, long-term operation is possible for many of the nuclear power plants in the world because, normally, they were built on the basis of conservative rules and regulations and, as a consequence, incorporate significant additional safety. Application of requirements to specific plants implies assessments of technical safety which show that conservative design philosophies created reserves and, as a consequence, there is an adequate level of safety also in long-term plant operation. For this purpose, the technical specifications must be revised, necessary additions made, and (international) operating experience taken into account and management of aging established. Two examples are presented to show how the approach to long-term plant operation is put into practice on a national level. (orig.)

The Discovery of Processing Stages: Extension of Sternberg's Method

NARCIS (Netherlands)

Anderson, John R; Zhang, Qiong; Borst, Jelmer P; Walsh, Matthew M

2016-01-01

We introduce a method for measuring the number and durations of processing stages from the electroencephalographic signal and apply it to the study of associative recognition. Using an extension of past research that combines multivariate pattern analysis with hidden semi-Markov models, the approach

78 FR 66670 - Housing Counseling Program: New Certification Requirements; Extension of Public Comment Period

Science.gov (United States)

2013-11-06

... Counseling Program: New Certification Requirements; Extension of Public Comment Period AGENCY: Office of the... inviting public comment on proposed changes to the Housing Counseling Program regulations for the purpose... housing counseling statute. This document announces that HUD is extending the public comment period, for...

Comparison of methods for determining the centers of extensive air showers

International Nuclear Information System (INIS)

Poirier, J.; Funk, E.; Mikocki, S.; Rohrer, N.

1987-01-01

Monte Carlo techniques are used to generate extensive air shower data. Two methods of determining the core location of the shower have been investigated: the method of least squares and the method of maximizing the likelihood function. The likelihood function method gives a precision of shower center location two times better than the χ 2 method for small numbers of detected particles. (orig.)

A Novel Extension Decision-Making Method for Selecting Solar Power Systems

Directory of Open Access Journals (Sweden)

Meng-Hui Wang

2013-01-01

Full Text Available Due to the complex parameters of a solar power system, the designer not only must think about the load demand but also needs to consider the price, weight, and annual power generating capacity (APGC and maximum power of the solar system. It is an important task to find the optimal solar power system with many parameters. Therefore, this paper presents a novel decision-making method based on the extension theory; we call it extension decision-making method (EDMM. Using the EDMM can make it quick to select the optimal solar power system. The paper proposed this method not only to provide a useful estimated tool for the solar system engineers but also to supply the important reference with the installation of solar systems to the consumer.

Extension of the analytic nodal method to four energy groups

International Nuclear Information System (INIS)

Parsons, D.K.; Nigg, D.W.

1985-01-01

The Analytic Nodal Method is one of several recently-developed coarse mesh numerical methods for efficiently and accurately solving the multidimensional static and transient neutron diffusion equations. This summary describes a mathematically rigorous extension of the Analytic Nodal Method to the frequently more physically realistic four-group case. A few general theoretical considerations are discussed, followed by some calculated results for a typical steady-state two-dimensional PWR quarter core application. 8 refs

75 FR 53988 - Notice Regarding the Requirement To Use eXtensible Business Reporting Language Format To Make...

Science.gov (United States)

2010-09-02

... eXtensible Business Reporting Language Format To Make Publicly Available the Information Required... of XBRL Tags'') to be used for the ratings history disclosure requirements in paragraph (d) of Rule... and retain certain records relating to its business and to retain certain other business records made...

Extensions to the Joshua GDMS to support environmental science and analysis data handling requirements

International Nuclear Information System (INIS)

Suich, J.E.; Honeck, H.C.

1978-01-01

For the past ten years, a generalized data management system (GDMS) called JOSHUA has been in use at the Savannah River Laboratory. Originally designed and implemented to support nuclear reactor physics and safety computational applications, the system is now also supporting environmental science modeling and impact assessment. Extensions to the original system are being developed to meet neet new data handling requirements, which include more general owner-member record relationships occurring in geographically encoded data sets, unstructured (relational) inquiry capability, cartographic analysis and display, and offsite data exchange. This paper discusses the need for these capabilities, places them in perspective as generic scientific data management activities, and presents the planned context-free extensions to the basic JOSHUA GDMS

Extensions to the Joshua GDMS to support environmental science and analysis data handling requirements

International Nuclear Information System (INIS)

Suich, J.E.; Honeck, H.C.

1977-01-01

For the past ten years, a generalized data management system (GDMS) called JOSHUA has been in use at the Savannah River Laboratory. Originally designed and implemented to support nuclear reactor physics and safety computational applications, the system is now also supporting environmental science modeling and impact assessment. Extensions to the original system are being developed to meet new data handling requirements, which include more general owner-member record relationships occurring in geographically encoded data sets, unstructured (relational) inquiry capability, cartographic analysis and display, and offsite data exchange. This paper discusses the need for these capabilities, places them in perspective as generic scientific data management activities, and presents the planned context-free extensions to the basic JOSHUA GDMS

Establishment of safety verification method for life extension based on periodic safety review

Energy Technology Data Exchange (ETDEWEB)

Kim, Soong Pyung; Yeom, Yu Son; Yoon, In Sik; Lee, Jeo Young [Chosun Univ., Gwangju (Korea, Republic of)

2004-02-15

Safe management of operating lifetimes of Nuclear Power Plants is a subject of prime interests. As the design life of the Nuclear Power Plant will be ended in 2008, an appropriate procedure for the design life re-assessment or lifetime extension is necessary in Korea. Therefore, the objective of this work is to develop procedural requirements which can be applied to the regulation of lifetime management or life extension of Nuclear Power Plants in Korea. Review on the linkage of the PSR with the extension of the operating lifetime of Nuclear Power Plants was performed to enhance the utilization of PSR results and analysis of the insufficiencies in the license rule in Korea.

An extension of the method of brackets. Part 1

Directory of Open Access Journals (Sweden)

Gonzalez Ivan

2017-09-01

Full Text Available The method of brackets is an efficient method for the evaluation of alarge class of definite integrals on the half-line. It is based on a small collection of rules, some of which are heuristic. The extension discussed here is based on the concepts of null and divergent series. These are formal representations of functions, whose coefficients an have meromorphic representations for n ∈ ℂ, but might vanish or blow up when n ∈ ℕ. These ideas are illustrated with the evaluation of a variety of entries from the classical table of integrals by Gradshteyn and Ryzhik.

EXTENSION EDUCATION SYMPOSIUM: reinventing extension as a resource--what does the future hold?

Science.gov (United States)

Mirando, M A; Bewley, J M; Blue, J; Amaral-Phillips, D M; Corriher, V A; Whittet, K M; Arthur, N; Patterson, D J

2012-10-01

The mission of the Cooperative Extension Service, as a component of the land-grant university system, is to disseminate new knowledge and to foster its application and use. Opportunities and challenges facing animal agriculture in the United States have changed dramatically over the past few decades and require the use of new approaches and emerging technologies that are available to extension professionals. Increased federal competitive grant funding for extension, the creation of eXtension, the development of smartphone and related electronic technologies, and the rapidly increasing popularity of social media created new opportunities for extension educators to disseminate knowledge to a variety of audiences and engage these audiences in electronic discussions. Competitive grant funding opportunities for extension efforts to advance animal agriculture became available from the USDA National Institute of Food and Agriculture (NIFA) and have increased dramatically in recent years. The majority of NIFA funding opportunities require extension efforts to be integrated with research, and NIFA encourages the use of eXtension and other cutting-edge approaches to extend research to traditional clientele and nontraditional audiences. A case study is presented to illustrate how research and extension were integrated to improve the adoption of AI by beef producers. Those in agriculture are increasingly resorting to the use of social media venues such as Facebook, YouTube, LinkedIn, and Twitter to access information required to support their enterprises. Use of these various approaches by extension educators requires appreciation of the technology and an understanding of how the target audiences access information available on social media. Technology to deliver information is changing rapidly, and Cooperative Extension Service professionals will need to continuously evaluate digital technology and social media tools to appropriately integrate them into learning and

Bandwidth extension of speech using perceptual criteria

CERN Document Server

Berisha, Visar; Liss, Julie

2013-01-01

Bandwidth extension of speech is used in the International Telecommunication Union G.729.1 standard in which the narrowband bitstream is combined with quantized high-band parameters. Although this system produces high-quality wideband speech, the additional bits used to represent the high band can be further reduced. In addition to the algorithm used in the G.729.1 standard, bandwidth extension methods based on spectrum prediction have also been proposed. Although these algorithms do not require additional bits, they perform poorly when the correlation between the low and the high band is weak. In this book, two wideband speech coding algorithms that rely on bandwidth extension are developed. The algorithms operate as wrappers around existing narrowband compression schemes. More specifically, in these algorithms, the low band is encoded using an existing toll-quality narrowband system, whereas the high band is generated using the proposed extension techniques. The first method relies only on transmitted high-...

Extension classification method for low-carbon product cases

Directory of Open Access Journals (Sweden)

Yanwei Zhao

2016-05-01

Full Text Available In product low-carbon design, intelligent decision systems integrated with certain classification algorithms recommend the existing design cases to designers. However, these systems mostly dependent on prior experience, and product designers not only expect to get a satisfactory case from an intelligent system but also hope to achieve assistance in modifying unsatisfactory cases. In this article, we proposed a new categorization method composed of static and dynamic classification based on extension theory. This classification method can be integrated into case-based reasoning system to get accurate classification results and to inform designers of detailed information about unsatisfactory cases. First, we establish the static classification model for cases by dependent function in a hierarchical structure. Then for dynamic classification, we make transformation for cases based on case model, attributes, attribute values, and dependent function, thus cases can take qualitative changes. Finally, the applicability of proposed method is demonstrated through a case study of screw air compressor cases.

Requirements for the retrofitting an extension of the maximum voltage power grid from the point of view of environmental protection and cultivated landscape work

International Nuclear Information System (INIS)

2013-01-01

The project on the requirements for the retrofitting an extension of the maximum voltage power grid from the point of view of environmental protection and cultivated landscape work includes contributions on the following topics: the development of the European transmission grid, the grid extension law, restrictions for the power grid and their infrastructure, requirements for the regulations concerning the realization of the transnational grid extension, inclusion of the public - public acceptance - communication, requirements concerning the environmental compensation law, overhead line - underground cable - health hazards, ecological effects of overhead lines and underground cables, infrastructural projects, power supply in the future, structural relief by photovoltaics.

A comparison between progressive extension method (PEM) and iterative method (IM) for magnetic field extrapolations in the solar atmosphere

Science.gov (United States)

Wu, S. T.; Sun, M. T.; Sakurai, Takashi

1990-01-01

This paper presents a comparison between two numerical methods for the extrapolation of nonlinear force-free magnetic fields, viz the Iterative Method (IM) and the Progressive Extension Method (PEM). The advantages and disadvantages of these two methods are summarized, and the accuracy and numerical instability are discussed. On the basis of this investigation, it is claimed that the two methods do resemble each other qualitatively.

An evaluation of information sources and requirements for nuclear plant-aging research with life-extension implications

International Nuclear Information System (INIS)

Jacobs, P.T.

1986-01-01

Information requirements for plant-aging and life-extension research are discussed. Various information sources that have been used in plant-aging studies and reliability assessments are described. Data-base searches and analyses were performed for a specific system using several data bases and plant sources. Comments are provided on the results using the various information sources

A method of formal requirements analysis for NPP I and C systems based on object-oriented visual modeling with SCR

International Nuclear Information System (INIS)

Koo, S. R.; Seong, P. H.

1999-01-01

In this work, a formal requirements analysis method for Nuclear Power Plant (NPP) I and C systems is suggested. This method uses Unified Modeling Language (UML) for modeling systems visually and Software Cost Reduction (SCR) formalism for checking the system models. Since object-oriented method can analyze a document by the objects in a real system, UML models that use object-oriented method are useful for understanding problems and communicating with everyone involved in the project. In order to analyze the requirement more formally, SCR tabular notations is converted from UML models. To help flow-through from UML models to SCR specifications, additional syntactic extensions for UML notation and a converting procedure are defined. The combined method has been applied to Dynamic Safety System (DSS). From this application, three kinds of errors were detected in the existing DSS requirements

An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

Science.gov (United States)

Wang, Yue; Gao, Dan; Mao, Xuming

2018-03-01

A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

Individual and Group Extension Methods: Perspectives from Vi ...

African Journals Online (AJOL)

Participatory Rural Appraisals (PRAs) tools including semi-structured questionnaires were administrated to 90 randomly selected farmers who had received extension services from the project. In addition, twelve project extension workers were interviewed. Data were analysed using SPSS computer package and descriptive ...

Novel method for detecting the hadronic component of extensive air showers

International Nuclear Information System (INIS)

Gromushkin, D. M.; Volchenko, V. I.; Petrukhin, A. A.; Stenkin, Yu. V.; Stepanov, V. I.; Shchegolev, O. B.; Yashin, I. I.

2015-01-01

A novel method for studying the hadronic component of extensive air showers (EAS) is proposed. The method is based on recording thermal neutrons accompanying EAS with en-detectors that are sensitive to two EAS components: an electromagnetic (e) component and a hadron component in the form of neutrons (n). In contrast to hadron calorimeters used in some arrays, the proposed method makes it possible to record the hadronic component over the whole area of the array. The efficiency of a prototype array that consists of 32 en-detectors was tested for a long time, and some parameters of the neutron EAS component were determined

Development of procedural requirements for life extension of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Hoon; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Jeong, Ji Hwan [Baekseok College, Cheonan (Korea, Republic of); Chang, Keun Sun [Sunmoon Univ., Asan (Korea, Republic of); Ham, Chul Hoon [The Catholic University of Korea, Seoul (Korea, Republic of); Chang, Soon Hong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

2002-03-15

Technical issues relevant to life extension of NPP were investigated. The GALL report, domestic PSR and periodic inspection rules were reviewed. Technical issues appearing in the safety evaluation reports related to license renewal of Calvert Ciffs 1 and 2 and Qconee 1,2 and 3 NPPs were reviewed. Preliminary study on PSA usage in NPP life extension assessment was performed and further works were suggested. The environment of rules and regulations was analyzed from the viewpoint of plant life extension. Two alternatives are suggested to revise the current domestic nuclear acts.

Development of procedural requirements for life extension of nuclear power plants

International Nuclear Information System (INIS)

Lee, Sang Hoon; Son, Moon Kyu; Jeong, Ji Hwan; Chang, Keun Sun; Ham, Chul Hoon; Chang, Soon Hong

2002-03-01

Technical issues relevant to life extension of NPP were investigated. The GALL report, domestic PSR and periodic inspection rules were reviewed. Technical issues appearing in the safety evaluation reports related to license renewal of Calvert Ciffs 1 and 2 and Qconee 1,2 and 3 NPPs were reviewed. Preliminary study on PSA usage in NPP life extension assessment was performed and further works were suggested. The environment of rules and regulations was analyzed from the viewpoint of plant life extension. Two alternatives are suggested to revise the current domestic nuclear acts

Metric-based method of software requirements correctness improvement

Directory of Open Access Journals (Sweden)

Yaremchuk Svitlana

2017-01-01

Full Text Available The work highlights the most important principles of software reliability management (SRM. The SRM concept construes a basis for developing a method of requirements correctness improvement. The method assumes that complicated requirements contain more actual and potential design faults/defects. The method applies a newer metric to evaluate the requirements complexity and double sorting technique evaluating the priority and complexity of a particular requirement. The method enables to improve requirements correctness due to identification of a higher number of defects with restricted resources. Practical application of the proposed method in the course of demands review assured a sensible technical and economic effect.

Waste-to-energy: A review of life cycle assessment and its extension methods.

Science.gov (United States)

Zhou, Zhaozhi; Tang, Yuanjun; Chi, Yong; Ni, Mingjiang; Buekens, Alfons

2018-01-01

This article proposes a comprehensive review of evaluation tools based on life cycle thinking, as applied to waste-to-energy. Habitually, life cycle assessment is adopted to assess environmental burdens associated with waste-to-energy initiatives. Based on this framework, several extension methods have been developed to focus on specific aspects: Exergetic life cycle assessment for reducing resource depletion, life cycle costing for evaluating its economic burden, and social life cycle assessment for recording its social impacts. Additionally, the environment-energy-economy model integrates both life cycle assessment and life cycle costing methods and judges simultaneously these three features for sustainable waste-to-energy conversion. Life cycle assessment is sufficiently developed on waste-to-energy with concrete data inventory and sensitivity analysis, although the data and model uncertainty are unavoidable. Compared with life cycle assessment, only a few evaluations are conducted to waste-to-energy techniques by using extension methods and its methodology and application need to be further developed. Finally, this article succinctly summarises some recommendations for further research.

Tampa Bay Extension Agents’ Views of Urban Extension: Philosophy and Program Strategies

Directory of Open Access Journals (Sweden)

Amy Harder

2017-06-01

Full Text Available The purpose of this article was to explore the concept of urban Extension as perceived by Extension agents within the Tampa Bay area, one of Florida’s fastest growing metropolitan areas. From a theoretical perspective, it is critical to understand Extension agents’ beliefs about urban Extension because behaviors are directly related to attitudes (Ajzen, 2012. In 2016, a qualitative investigation was undertaken to explore the perspectives of 23 agents working within the Tampa Bay area. Results showed the majority of agents believed that context and client needs are unique for urban Extension, and that to a lesser extent, unique agent expertise is required. Further, these beliefs impacted how agents reported their approach to programming, with an emphasis on providing convenience and seeking partnerships. Difficulties were identified related to identifying the role of Extension in a resource-rich environment of service providers, which contributed to the existence of a perceived disconnect between urban audiences and Extension. Opportunities exist for Extension leadership to provide strategic organizational support that will enhance agents’ abilities to succeed in the metropolitan environment.

Thick restarting of the Davidson method: An extension to implicit restarting

Energy Technology Data Exchange (ETDEWEB)

Stathopoulos, A.; Yousef Saad; Wu, Kesheng [Univ. of Minnesota, Minneapolis, MN (United States)

1996-12-31

The solution of the large, sparse, eigenvalue problem Ax = {lambda}x, for a few eigenpairs is central to many scientific applications. The Arnoldi method, and its equivalent in the symmetric case the Lanczos method, have been the traditional approach to solving these problems. Preconditioning, through some shift-and-invert technique, is frequently employed, because of the difficulty of these problems. A different approach is followed by the Generalized Davidson (GD) method which is a popular preconditioned variant of the Lanczos iteration. Instead of using a three-term recurrence to build an orthonormal basis for the Krylov subspace, the GD algorithm obtains the next basis vector by explicitly orthogonalizing the preconditioned residual (M - {lambda}I){sup -1} (A - {lambda}I)x against the existing basis. A straightforward extension to the non-symmetric case has also been studied in. The GD method can be regarded as a way of improving convergence and robustness at the expense of a more complicated step.

Extension of a hybrid particle-continuum method for a mixture of chemical species

Science.gov (United States)

Verhoff, Ashley M.; Boyd, Iain D.

2012-11-01

Due to the physical accuracy and numerical efficiency achieved by analyzing transitional, hypersonic flow fields with hybrid particle-continuum methods, this paper describes a Modular Particle-Continuum (MPC) method and its extension to include multiple chemical species. Considerations that are specific to a hybrid approach for simulating gas mixtures are addressed, including a discussion of the Chapman-Enskog velocity distribution function (VDF) for near-equilibrium flows, and consistent viscosity models for the individual CFD and DSMC modules of the MPC method. Representative results for a hypersonic blunt-body flow are then presented, where the flow field properties, surface properties, and computational performance are compared for simulations employing full CFD, full DSMC, and the MPC method.

Identified adjustability dimensions when generating a product specific requirements specification by requirements reuse

DEFF Research Database (Denmark)

Hauksdóttir, Dagný; Mortensen, Niels Henrik; Nielsen, Poul Erik

2014-01-01

. An extensive state of the art is included to introduce the presented methods related to each adjustability dimensions. The options for implementing each adjustability dimensions in a requirement reuse approach are illustrated along with a discussion regarding the benefits and issues resulting from each option....... This discussion should help practitioners to better understand the possible methods that can be implemented and to design a user friendly and sustainable approach. A case study, describing how the dimensions are incorporated in two requirements reuse approaches, for Danfoss Solar Inverters (SI) and Danfoss...

Energy Sustainability Evaluation Model Based on the Matter-Element Extension Method: A Case Study of Shandong Province, China

Directory of Open Access Journals (Sweden)

Siqi Li

2017-11-01

Full Text Available Energy sustainability is of vital importance to regional sustainability, because energy sustainability is closely related to both regional economic growth and social stability. The existing energy sustainability evaluation methods lack a unified system to determine the relevant influencing factors, are relatively weak in quantitative analysis, and do not fully describe the ‘paradoxical’ characteristics of energy sustainability. To solve those problems and to reasonably and objectively evaluate energy sustainability, we propose an energy sustainability evaluation model based on the matter-element extension method. We first select energy sustainability evaluation indexes based on previous research and experience. Then, a variation coefficient method is used to determine the weights of these indexes. Finally, the study establishes the classical domain, joint domain, and the matter-element relationship to evaluate energy sustainability through matter-element extension. Data from Shandong Province is used as a case study to evaluate the region’s energy sustainability. The case study shows that the proposed energy sustainability evaluation model, based on the matter-element extension method, can effectively evaluate regional energy sustainability.

Efficient improvement of virtual crack extension method by a derivative of the finite element stiffness matrix

International Nuclear Information System (INIS)

Ishikawa, H.; Nakano, S.; Yuuki, R.; Chung, N.Y.

1991-01-01

In the virtual crack extension method, the stress intensity factor, K, is obtained from the converged value of the energy release rate by the difference of the finite element stiffness matrix when some crack extension are taken. Instead of the numerical difference of the finite element stiffness, a new method to use a direct dirivative of the finite element stiffness matrix with respect to crack length is proposed. By the present method, the results of some example problems, such as uniform tension problems of a square plate with a center crack and a rectangular plate with an internal slant crack, are obtained with high accuracy and good efficiency. Comparing with analytical results, the present values of the stress intensity factors of the problems are obtained with the error that is less than 0.6%. This shows the numerical assurance of the usefulness of the present method. A personal computer program for the analysis is developed

New ghost-free extensions of general relativity

International Nuclear Information System (INIS)

Mann, R.B.

1989-01-01

The method of algebraic extension is shown to yield a large class of gravitational theories which are extensions of general relativity. Requiring positivity of energy in the flat-space limit of such theories provides some constraints, but a large set of theories of potential phenomenological interest survives this condition. Explicit examples of such theories include the non-symmetric gravitational theory, algebraically extended Hilbert gravity and a one-parameter family of theories with dynamical torsion. In general such theories do not alter general relativistic post-Newtonian predictions for time delay experiments; rather they alter the non-linearities of the post-Newtonian gravitational potential. Such effects may be probed by measuring periastron shifts, as in the eclipsing binary systems Di Her and As Cam, as well as in the binary pulsar PSR 1913 + 16 (author)

Safety design guides for containment extension for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide for containment extension describes the containment isolation philosophy and containment extension requirements. The metal extensions and components falling within the scope of ASME Section III are classified in accordance with the CAN/CSA-N285.0 and CAN/CSA-N285.3. The special consideration for the leak monitoring capability, seismic qualification and inspection requirements for containment extensions, etc., are defined in this design guide. In addition, the containment isolation systems are defined and summarized schematically in appendix A. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. (Author) .new

The Sources and Methods of Engineering Design Requirement

DEFF Research Database (Denmark)

Li, Xuemeng; Zhang, Zhinan; Ahmed-Kristensen, Saeema

2014-01-01

to be defined in a new context. This paper focuses on understanding the design requirement sources at the requirement elicitation phase. It aims at proposing an improved design requirement source classification considering emerging markets and presenting current methods for eliciting requirement for each source...

Extension of the heat flux method to liquid (bio-)fuels

Energy Technology Data Exchange (ETDEWEB)

Meuwissen, R.

2009-01-15

The adiabatic burning velocity S{sub L} of a fuel/oxidizer mixture is a key parameter governing many properties of combustion, such as the shape and stabilization of the flame. It can be applied as an input parameter for many combustion models. Furthermore, kinetic schemes can be validated by the use of this parameter. A great extend of research has been performed on determining the adiabatic burning velocities of gaseous fuels. Liquid fuels however, have been examined far less extensive. Literature available shows eminent scatter amongst the data of independent groups and distinctive techniques. The methods used for measuring burning velocities need certain corrections for flame properties which cause additional uncertainties and make the scattering of data not completely unexpected. The heat flux burner used in this work, previously developed at the TU/e, creates a flat flame coherently no corrections for stretch are necessary. Instead, the heat exchange with the burner is considered; by measuring the temperature distribution over the burner plate, the net heat flux of the flame to the burner can be determined. By tuning the unburnt gas velocity until there is no net heat flux, the adiabatic burning velocity is found by interpolation. An extension to the original design, using a vaporized fluid in a carrier gas flow, enables to measure burning velocities of liquid fuels. In the present research, burning velocity measurements have been performed on vaporized ethanol/air flames in order to validate the setup. Similarities with the latest experimental research have been evaluated and good agreement has been found. Furthermore, temperature dependencies have been elucidated and compared to power law correlations stated by this external research. Again, good resemblance can be claimed, although the expanding of certain input parameters on mixture composition could give more solid confirmation. Subsequently, comparison with numerically performed calculations has been

A Survey of Various Object Oriented Requirement Engineering Methods

OpenAIRE

Anandi Mahajan; Dr. Anurag Dixit

2013-01-01

In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

Basic requirements to the methods of personnel monitoring

International Nuclear Information System (INIS)

Keirim-Markus, I.B.

1981-01-01

Requirements to methods of personnel monitoring (PMM) depending on irradiation conditions are given. The irradiation conditions determine subjected to monitoring types of irradiation, measurement ranges, periodicity of monitoring, operativeness of obtaining results and required accuracy. The PMM based on the photographic effect of ionizing radiation is the main method of the mass monitoring [ru

Fault Diagnosis of Car Engine by Using a Novel GA-Based Extension Recognition Method

Directory of Open Access Journals (Sweden)

Meng-Hui Wang

2014-01-01

Full Text Available Due to the passenger’s security, the recognized hidden faults in car engines are the most important work for a maintenance engineer, so they can regulate the engines to be safe and improve the reliability of automobile systems. In this paper, we will present a novel fault recognition method based on the genetic algorithm (GA and the extension theory and also apply this method to the fault recognition of a practical car engine. The proposed recognition method has been tested on the Nissan Cefiro 2.0 engine and has also been compared to other traditional classification methods. Experimental results are of great effect regarding the hidden fault recognition of car engines, and the proposed method can also be applied to other industrial apparatus.

TAF-4 is required for the life extension of isp-1, clk-1 and tpk-1 Mit mutants.

Science.gov (United States)

Khan, Maruf H; Ligon, Melissa; Hussey, Lauren R; Hufnal, Bryce; Farber, Robert; Munkácsy, Erin; Rodriguez, Amanda; Dillow, Andy; Kahlig, Erynn; Rea, Shane L

2013-10-01

While numerous life-extending manipulations have been discovered in the nematode Caenorhabditis elegans, one that remains most enigmatic is disruption of oxidative phosphorylation. In order to unravel how such an ostensibly deleterious manipulation can extend lifespan, we sought to identify the ensemble of nuclear transcription factors that are activated in response to defective mitochondrial electron transport chain (ETC) function. Using a feeding RNAi approach, we targeted over 400 transcription factors and identified 15 that, when reduced in function, reproducibly and differentially altered the development, stress response, and/or fecundity of isp-1(qm150) Mit mutants relative to wild-type animals. Seven of these transcription factors--AHA-1, CEH-18, HIF-1, JUN-1, NHR-27, NHR-49 and the CREB homolog-1 (CRH-1)-interacting protein TAF-4--were also essential for isp-1 life extension. When we tested the involvement of these seven transcription factors in the life extension of two other Mit mutants, namely clk-1(qm30) and tpk-1(qm162), TAF-4 and HIF-1 were consistently required. Our findings suggest that the Mit phenotype is under the control of multiple transcriptional responses, and that TAF-4 and HIF-1 may be part of a general signaling axis that specifies Mit mutant life extension.

Considerations for Applying Design Extension Conditions to Domestic Nuclear Power Plants

International Nuclear Information System (INIS)

Ryu, Yongho

2013-01-01

The concept is designed to include more serious accidents than the existing design basis accidents considering additional failures. Design extension conditions can be derived based on engineering judgments, deterministic analysis or probabilistic analysis of the nuclear power plants. They are used to secure practical response capabilities to prevent or mitigate accidents. They may also require the deployment of additional safety equipment for existing nuclear power plants currently in operation. Though the general requirements of design extension conditions are described under the IAEA standards, no specific guidelines have been presented as required for their actual application to the nuclear power plant design. Furthermore, there is great variation between countries in implementing the requirements of design extension conditions. Therefore, for the actual application, considerable effort should be made among relevant organizations to establish detailed requirements of the design extension conditions. Such activities could constitute a part of the efforts of the nuclear community to meet the general public's expectations concerning the safety of nuclear power plants. The introduction of design extension conditions is expected to be a means of systematically enhancing the safety of nuclear power plants. Yet, there exists great differences in terms of the scope of analysis and the acceptance criteria, as no uniform practices have yet been established in applying the specific requirements for design extension conditions. A careful review is required in terms of the technical basis for setting the requirements, including those pertaining to the scope of analysis and the acceptance criteria. The introduction of these new requirements to Korean nuclear power plants may cause unexpected problems. Therefore, it is desirable for the regulatory agency to systematically assess the impact of design extension conditions and to discuss the arising issues with the stake holder

A Method for Software Requirement Volatility Analysis Using QFD

Directory of Open Access Journals (Sweden)

Yunarso Anang

2016-10-01

Full Text Available Changes of software requirements are inevitable during the development life cycle. Rather than avoiding the circumstance, it is easier to just accept it and find a way to anticipate those changes. This paper proposes a method to analyze the volatility of requirement by using the Quality Function Deployment (QFD method and the introduced degree of volatility. Customer requirements are deployed to software functions and subsequently to architectural design elements. And then, after determining the potential for changes of the design elements, the degree of volatility of the software requirements is calculated. In this paper the method is described using a flow diagram and illustrated using a simple example, and is evaluated using a case study.

Increased iron supplied through Fet3p results in replicative life span extension of Saccharomyces cerevisiae under conditions requiring respiratory metabolism.

Science.gov (United States)

Botta, Gabriela; Turn, Christina S; Quintyne, Nicholas J; Kirchman, Paul A

2011-10-01

We have previously shown that copper supplementation extends the replicative life span of Saccharomyces cerevisiae when grown under conditions forcing cells to respire. We now show that copper's effect on life span is through Fet3p, a copper containing enzyme responsible for high affinity transport of iron into yeast cells. Life span extensions can also be obtained by supplementing the growth medium with 1mM ferric chloride. Extension by high iron levels is still dependent on the presence of Fet3p. Life span extension by iron or copper requires growth on media containing glycerol as the sole carbon source, which forces yeast to respire. Yeast grown on glucose containing media supplemented with iron show no extension of life span. The iron associated with cells grown in media supplemented with copper or iron is 1.4-1.8 times that of cells grown without copper or iron supplementation. As with copper supplementation, iron supplementation partially rescues the life span of superoxide dismutase mutants. Cells grown with copper supplementation display decreased production of superoxide as measured by dihydroethidium staining. Copyright © 2011 Elsevier Inc. All rights reserved.

Band extension in digital methods of transfer function determination – signal conditioners asymmetry error corrections

Directory of Open Access Journals (Sweden)

Zbigniew Staroszczyk

2014-12-01

Full Text Available [b]Abstract[/b]. In the paper, the calibrating method for error correction in transfer function determination with the use of DSP has been proposed. The correction limits/eliminates influence of transfer function input/output signal conditioners on the estimated transfer functions in the investigated object. The method exploits frequency domain conditioning paths descriptor found during training observation made on the known reference object.[b]Keywords[/b]: transfer function, band extension, error correction, phase errors

Economic modelling for life extension decision making

International Nuclear Information System (INIS)

Farber, M.A.; Harrison, D.L.; Carlson, D.D.

1987-01-01

This paper presents a methodology for the economic and financial analysis of nuclear plant life extension under uncertainty and demonstrates its use in a case analysis. While the economic and financial evaluation of life extension does not require new analytical tools, such studies should be based on the following three premises. First, the methodology should examine effects at the level of the company or utility system, because the most important economic implications of life extension relate to the altered generation system expansion plan. Second, it should focus on the implications of uncertainty in order to understand the factors that most affect life extension benefits and identify risk management efforts. Third, the methodology should address multiple objectives, at a minimum, both economic and financial objectives. An analysis of the role of life extension for Virginia Power's generating system was performed using the MIDAS model, developed by the Electric Power Research Institute. MIDAS is particularly well suited to this type of study because of its decision analysis framework. The model incorporates modules for load analysis, capacity expansion, production costing, financial analysis, and rates. The decision tree structure facilitates the multiple-scenario analysis of uncertainty. The model's output includes many economic and financial measures, including capital expenditures, fuel and purchases power costs, revenue requirements, average rates, external financing requirements, and coverage ratio. Based on findings for Virginia Power's Surry 1 plant, nuclear plant life extension has economic benefits for a utility's customers and financial benefits for the utility's investors. These benefits depend on a number of economic, technical and regulatory factors. The economic analysis presented in this paper identifies many of the key factors and issues relevant to life extension planning

International requirements for life extension of nuclear power plants; Internationale Anforderungen zur Lebensdauerverlaengerung von Kernkraftwerken

Energy Technology Data Exchange (ETDEWEB)

Wernicke, Robert [TUeV NORD SysTec GmbH und Co. KG, Abt. Festigkeit und Konstruktion, Hamburg (Germany)

2009-11-15

Lifetime extension or long-term operation of nuclear facilities are topics of great international significance against the backdrop of a fleet of nuclear power plants of which many have reached 2/3 of their planned life. The article deals with the conditions for, and the specific requirements of, seeking long-term operation of nuclear power plants as established internationally and on the basis of IAEA collections. Technically, long-term operation is possible for many of the nuclear power plants in the world because, normally, they were built on the basis of conservative rules and regulations and, as a consequence, incorporate significant additional safety. Application of requirements to specific plants implies assessments of technical safety which show that conservative design philosophies created reserves and, as a consequence, there is an adequate level of safety also in long-term plant operation. For this purpose, the technical specifications must be revised, necessary additions made, and (international) operating experience taken into account and management of aging established. Two examples are presented to show how the approach to long-term plant operation is put into practice on a national level. (orig.)

Flow and breakup in extension of low-density polyethylene

DEFF Research Database (Denmark)

Rasmussen, Henrik; Fasano, Andrea

2018-01-01

The breakup during the extension of a low-density polyethylene Lupolen 1840D, as observed experimentally by Burghelea et al. (J Non-Newt Fluid Mech 166:1198–1209 2011), was investigated. This was observed during the extension of an circular cylinder with radius R0 = 4 mm and length L0 = 5mm....... The sample was attached to two flat end plates, separated exponentially in time to extend the samples. A numerical method based on a Lagrangian kinematics description in a continuum mechanical framework was used to calculate the extension of an initially cylindrically shaped sample with and without small...... the error bars as reported experimentally by Burghelea et al. (J Non-Newt Fluid Mech 166:1198–1209 2011). At low extensional rates, the measurements were considerably above the calculated ones. A very small relative suppression in the surface (0.1%) was required to achieve an agreement with all measurements...

How to Compare the Security Quality Requirements Engineering (SQUARE) Method with Other Methods

National Research Council Canada - National Science Library

Mead, Nancy R

2007-01-01

The Security Quality Requirements Engineering (SQUARE) method, developed at the Carnegie Mellon Software Engineering Institute, provides a systematic way to identify security requirements in a software development project...

Method for developing cost estimates for generic regulatory requirements

International Nuclear Information System (INIS)

1985-01-01

The NRC has established a practice of performing regulatory analyses, reflecting costs as well as benefits, of proposed new or revised generic requirements. A method had been developed to assist the NRC in preparing the types of cost estimates required for this purpose and for assigning priorities in the resolution of generic safety issues. The cost of a generic requirement is defined as the net present value of total lifetime cost incurred by the public, industry, and government in implementing the requirement for all affected plants. The method described here is for commercial light-water-reactor power plants. Estimating the cost for a generic requirement involves several steps: (1) identifying the activities that must be carried out to fully implement the requirement, (2) defining the work packages associated with the major activities, (3) identifying the individual elements of cost for each work package, (4) estimating the magnitude of each cost element, (5) aggregating individual plant costs over the plant lifetime, and (6) aggregating all plant costs and generic costs to produce a total, national, present value of lifetime cost for the requirement. The method developed addresses all six steps. In this paper, we discuss on the first three

Classical Methods and Calculation Algorithms for Determining Lime Requirements

Directory of Open Access Journals (Sweden)

André Guarçoni

Full Text Available ABSTRACT The methods developed for determination of lime requirements (LR are based on widely accepted principles. However, the formulas used for calculation have evolved little over recent decades, and in some cases there are indications of their inadequacy. The aim of this study was to compare the lime requirements calculated by three classic formulas and three algorithms, defining those most appropriate for supplying Ca and Mg to coffee plants and the smaller possibility of causing overliming. The database used contained 600 soil samples, which were collected in coffee plantings. The LR was estimated by the methods of base saturation, neutralization of Al3+, and elevation of Ca2+ and Mg2+ contents (two formulas and by the three calculation algorithms. Averages of the lime requirements were compared, determining the frequency distribution of the 600 lime requirements (LR estimated through each calculation method. In soils with low cation exchange capacity at pH 7, the base saturation method may fail to adequately supply the plants with Ca and Mg in many situations, while the method of Al3+ neutralization and elevation of Ca2+ and Mg2+ contents can result in the calculation of application rates that will increase the pH above the suitable range. Among the methods studied for calculating lime requirements, the algorithm that predicts reaching a defined base saturation, with adequate Ca and Mg supply and the maximum application rate limited to the H+Al value, proved to be the most efficient calculation method, and it can be recommended for use in numerous crops conditions.

Handbook of methods for risk-based analysis of technical specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1994-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Handbook of methods for risk-based analysis of Technical Specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1993-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Extensions and applications of ensemble-of-trees methods in machine learning

Science.gov (United States)

Bleich, Justin

Ensemble-of-trees algorithms have emerged to the forefront of machine learning due to their ability to generate high forecasting accuracy for a wide array of regression and classification problems. Classic ensemble methodologies such as random forests (RF) and stochastic gradient boosting (SGB) rely on algorithmic procedures to generate fits to data. In contrast, more recent ensemble techniques such as Bayesian Additive Regression Trees (BART) and Dynamic Trees (DT) focus on an underlying Bayesian probability model to generate the fits. These new probability model-based approaches show much promise versus their algorithmic counterparts, but also offer substantial room for improvement. The first part of this thesis focuses on methodological advances for ensemble-of-trees techniques with an emphasis on the more recent Bayesian approaches. In particular, we focus on extensions of BART in four distinct ways. First, we develop a more robust implementation of BART for both research and application. We then develop a principled approach to variable selection for BART as well as the ability to naturally incorporate prior information on important covariates into the algorithm. Next, we propose a method for handling missing data that relies on the recursive structure of decision trees and does not require imputation. Last, we relax the assumption of homoskedasticity in the BART model to allow for parametric modeling of heteroskedasticity. The second part of this thesis returns to the classic algorithmic approaches in the context of classification problems with asymmetric costs of forecasting errors. First we consider the performance of RF and SGB more broadly and demonstrate its superiority to logistic regression for applications in criminology with asymmetric costs. Next, we use RF to forecast unplanned hospital readmissions upon patient discharge with asymmetric costs taken into account. Finally, we explore the construction of stable decision trees for forecasts of

Power generation options. Rehabilitation for life extension and cogeneration

International Nuclear Information System (INIS)

1993-01-01

The first step in evaluating a life extension or upgrading project is to determine the project's economic benefit to the utility. A screening study should be performed for as many candidate plants as are available; two of the most useful screening tools for rapid economic analysis of life extension possibilities are: Present Worth Revenue Requirements (PWRR) Analysis, and Life Cycle Cost (LCC) Analysis. (Examples of both methods are discussed). PWRR analysis considers only the expenses associated with operation of a plant or electrical system, and the revenue required to meet those expenses. The total revenue that may be received from the system is not considered in the analysis. The estimated costs for a base case (usually no rehabilitation or life extension) is compared to the operating costs of various alternatives, calculated over an operating life span of several years, and reduced to a Present Worth value, usually for the year in which the study started. If the PWRR of any alternative is estimated to be less than the base case, then an investment in the alternative plant equal to or less than this differential is a preferred economic choice. PWRR analysis is useful if future systems development and future gross revenue to the utility is difficult to estimate; it is also useful when comparing like technologies when differences in fuel supply and fuel cost are minimal

The Videographic Requirements Gathering Method for Adolescent-Focused Interaction Design

Directory of Open Access Journals (Sweden)

Tamara Peyton

2014-08-01

Full Text Available We present a novel method for conducting requirements gathering with adolescent populations. Called videographic requirements gathering, this technique makes use of mobile phone data capture and participant creation of media images. The videographic requirements gathering method can help researchers and designers gain intimate insight into adolescent lives while simultaneously reducing power imbalances. We provide rationale for this approach, pragmatics of using the method, and advice on overcoming common challenges facing researchers and designers relying on this technique.

Selection Ideal Coal Suppliers of Thermal Power Plants Using the Matter-Element Extension Model with Integrated Empowerment Method for Sustainability

Directory of Open Access Journals (Sweden)

Zhongfu Tan

2014-01-01

Full Text Available In order to reduce thermal power generation cost and improve its market competitiveness, considering fuel quality, cost, creditworthiness, and sustainable development capacity factors, this paper established the evaluation system for coal supplier selection of thermal power and put forward the coal supplier selection strategies for thermal power based on integrated empowering and ideal matter-element extension models. On the one hand, the integrated empowering model can overcome the limitations of subjective and objective methods to determine weights, better balance subjective, and objective information. On the other hand, since the evaluation results of the traditional element extension model may fall into the same class and only get part of the order results, in order to overcome this shortcoming, the idealistic matter-element extension model is constructed. It selects the ideal positive and negative matter-elements classical field and uses the closeness degree to replace traditional maximum degree of membership criterion and calculates the positive or negative distance between the matter-element to be evaluated and the ideal matter-element; then it can get the full order results of the evaluation schemes. Simulated and compared with the TOPSIS method, Romania selection method, and PROMETHEE method, numerical example results show that the method put forward by this paper is effective and reliable.

Consistent Conformal Extensions of the Standard Model arXiv

CERN Document Server

Loebbert, Florian; Plefka, Jan

The question of whether classically conformal modifications of the standard model are consistent with experimental obervations has recently been subject to renewed interest. The method of Gildener and Weinberg provides a natural framework for the study of the effective potential of the resulting multi-scalar standard model extensions. This approach relies on the assumption of the ordinary loop hierarchy $\\lambda_\\text{s} \\sim g^2_\\text{g}$ of scalar and gauge couplings. On the other hand, Andreassen, Frost and Schwartz recently argued that in the (single-scalar) standard model, gauge invariant results require the consistent scaling $\\lambda_\\text{s} \\sim g^4_\\text{g}$. In the present paper we contrast these two hierarchy assumptions and illustrate the differences in the phenomenological predictions of minimal conformal extensions of the standard model.

Caloric Restriction-Induced Extension of Chronological Lifespan Requires Intact Respiration in Budding Yeast.

Science.gov (United States)

Kwon, Young-Yon; Lee, Sung-Keun; Lee, Cheol-Koo

2017-04-01

Caloric restriction (CR) has been shown to extend lifespan and prevent cellular senescence in various species ranging from yeast to humans. Many effects of CR may contribute to extend lifespan. Specifically, CR prevents oxidative damage from reactive oxygen species (ROS) by enhancing mitochondrial function. In this study, we characterized 33 single electron transport chain (ETC) gene-deletion strains to identify CR-induced chronological lifespan (CLS) extension mechanisms. Interestingly, defects in 17 of these 33 ETC gene-deleted strains showed loss of both respiratory function and CR-induced CLS extension. On the contrary, the other 16 respiration-capable mutants showed increased CLS upon CR along with increased mitochondrial membrane potential (MMP) and intracellular adenosine triphosphate (ATP) levels, with decreased mitochondrial superoxide generation. We measured the same parameters in the 17 non-respiratory mutants upon CR. CR simultaneously increased MMP and mitochondrial superoxide generation without altering intracellular ATP levels. In conclusion, respiration is essential for CLS extension by CR and is important for balancing MMP, ROS, and ATP levels.

EXTENSION EDUCATION SYMPOSIUM: Getting the most out of your extension appointment and still having a life.

Science.gov (United States)

Powers, W; Cockett, N; Lardy, G

2017-04-01

Managing the demands of an academic appointment in extension can be a challenging task. Demands from constituent groups, expectations of supervisors, and rigors of promotion and tenure processes can create pressures that young faculty did not expect. Throw in spousal and family duties and you have created a situation that many will find hard to navigate. However, there are ways to cope and, even better news, there are ways to excel in meeting the demands of an academic appointment and enjoying life. Because many new extension faculty members do not have prior experience in extension, best practices in documenting programs and extension scholarship over the pretenure period are provided in this paper. Appointments that include both research and extension are quite common at many land grant universities. The advantages of joint appointments are numerous and include the fact that more and more grant agencies are seeking integrated research, teaching, and/or extension projects. However, the time demands of joint appointments can be challenging. Joint appointments can be designed to help faculty members conduct important translational research and have it be applied in a production setting. By seeking commonalities in research and extension efforts, joint appointments can be very synergistic. Development of highly successful programs requires planning on the front end with an emphasis on an in-depth needs assessment to determine stakeholder needs for both research and extension. Impact assessment should be part of this planning effort. Performing as a successful extension faculty member while maintaining relationships outside of work is challenging and requires deliberate effort on the part of employees and supervisors to realize there is more to life than work. Some authors have referred to this as work-life balance, but it may be more helpful to think of it as work-life effectiveness. To do this, one needs to 1) define what success looks like, 2) set boundaries and

A novel method for computation of the discrete Fourier transform over characteristic two finite field of even extension degree

OpenAIRE

Fedorenko, Sergei V.

2011-01-01

A novel method for computation of the discrete Fourier transform over a finite field with reduced multiplicative complexity is described. If the number of multiplications is to be minimized, then the novel method for the finite field of even extension degree is the best known method of the discrete Fourier transform computation. A constructive method of constructing for a cyclic convolution over a finite field is introduced.

Management of extensive surgical emphysema with subcutaneous drain: A case report

Directory of Open Access Journals (Sweden)

Quoc Tran

Full Text Available Introduction: Subcutaneous emphysema (SE is a frequent and often self-limiting complication of tube thoracostomy or other cardiothoracic procedures. On rare occasions, severe and extensive surgical emphysema marked by palpable cutaneous tension, dysphagia, dysphonia, palpebral closure or associated with pneumoperitoneum, airway compromise, “tension phenomenon” and respiratory failure require treatment. Presentation of case: A 67 year old lady presented with a large spontaneous pneumothorax on the background of end-stage chronic obstructive pulmonary disease (COPD and newly diagnosed lung cancer, developed extensive surgical emphysema following insertion of a chest drain. Immediate improvement was observed after insertion of a large-bore, 26 French (Fr. intercostal catheter, subcutaneous drain which was maintained under low suction (−5 cm H2O for a further 24 h. Discussion: Several methods have been described in the literature for the treatment of extensive subcutaneous emphysema, including: emergency tracheostomy, multisite subcutaneous drainage, infraclavicular “blow holes” incisions and subcutaneous drains or simply increasing suction on an in situ chest drain. Here a large-bore, fenestrated, subcutaneous drain maintained on low negative pressure also provided the necessary decompression. Conclusion: In the absence of a comparative study to identify the most effective method to manage extensive subcutaneous emphysema, this case highlights an effective, simple and safe management option. Keywords: Pneumothorax, Subcutaneous emphysema, Drain, Low suction, Intercostal catheter, Case report

Method of shaping fields of controlled extension in a resonator with a large electrical length

International Nuclear Information System (INIS)

Bomko, V.A.; Rudiak, B.I.

A method is discussed for controlling the energy of particles accelerated in a linear accelerator consisting of a volume resonator with drift tubes. Results are described for experimental studies of problems with field shaping of controlled extension of fields in an accelerating structure having drift tubes and a large electrical length. The possibility of shaping the field in a resonator using a stabilizing system of the ''antipode'' type is considered

Stochastic Unit Commitment via Progressive Hedging - Extensive Analysis of Solution Methods

DEFF Research Database (Denmark)

Ordoudis, Christos; Pinson, Pierre; Zugno, Marco

2015-01-01

Owing to the massive deployment of renewable power production units over the last couple of decades, the use of stochastic optimization methods to solve the unit commitment problem has gained increasing attention. Solving stochastic unit commitment problems in large-scale power systems requires h...

Extension of local front reconstruction method with controlled coalescence model

Science.gov (United States)

Rajkotwala, A. H.; Mirsandi, H.; Peters, E. A. J. F.; Baltussen, M. W.; van der Geld, C. W. M.; Kuerten, J. G. M.; Kuipers, J. A. M.

2018-02-01

The physics of droplet collisions involves a wide range of length scales. This poses a challenge to accurately simulate such flows with standard fixed grid methods due to their inability to resolve all relevant scales with an affordable number of computational grid cells. A solution is to couple a fixed grid method with subgrid models that account for microscale effects. In this paper, we improved and extended the Local Front Reconstruction Method (LFRM) with a film drainage model of Zang and Law [Phys. Fluids 23, 042102 (2011)]. The new framework is first validated by (near) head-on collision of two equal tetradecane droplets using experimental film drainage times. When the experimental film drainage times are used, the LFRM method is better in predicting the droplet collisions, especially at high velocity in comparison with other fixed grid methods (i.e., the front tracking method and the coupled level set and volume of fluid method). When the film drainage model is invoked, the method shows a good qualitative match with experiments, but a quantitative correspondence of the predicted film drainage time with the experimental drainage time is not obtained indicating that further development of film drainage model is required. However, it can be safely concluded that the LFRM coupled with film drainage models is much better in predicting the collision dynamics than the traditional methods.

Effectiveness Of Communication Outreach Strategies Of Extension ...

African Journals Online (AJOL)

Communication is a major component of agricultural extension and extension agents utilize various methods to deliver messages to their clienteles. The paper focused on the effectiveness of communication outreach strategies of extension agents in Imo State, Nigeria. Data for the study was collected with the aid of ...

Programming Reactive Extensions and LINQ

CERN Document Server

Liberty, Jesse

2011-01-01

Pro Reactive Extensions and LINQ is a deep dive into the next important technology for .NET developers: Reactive Extensions. This in-depth tutorial goes beyond what is available anywhere else to teach how to write WPF, Silverlight, and Windows Phone applications using the Reactive Extensions (Rx) to handle events and asynchronous method calls. Reactive programming allows you to turn those aspects of your code that are currently imperative into something much more event-driven and flexible. For this reason, it's sometimes referred to as LINQ for Events. Reactive programming hinges on the concep

75 FR 36444 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2010-06-25

... be provided in the desired format, reporting burden (time and financial resources) is minimized... DEPARTMENT OF LABOR Wage and Hour Division Proposed Extension of the Approval of Information... comment on proposed and/or continuing collections of information in accordance with the Paperwork...

76 FR 48181 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2011-08-08

... be provided in a desired format, reporting burden (time and financial resources) is minimized... DEPARTMENT OF LABOR Wage and Hour Division Proposed Extension of the Approval of Information... comment on proposed and/or continuing collections of information in accordance with the Paperwork...

76 FR 15348 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2011-03-21

... be provided in the desired format, reporting burden (time and financial resources) is minimized... DEPARTMENT OF LABOR Wage and Hour Division Proposed Extension of the Approval of Information... comment on proposed and/or continuing collections of information in accordance with the Paperwork...

Quantitative methods for developing C2 system requirement

Energy Technology Data Exchange (ETDEWEB)

Tyler, K.K.

1992-06-01

The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the ``communications gap`` between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff? This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

Some Findings Concerning Requirements in Agile Methodologies

Science.gov (United States)

Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

Bayesian optimization for computationally extensive probability distributions.

Science.gov (United States)

Tamura, Ryo; Hukushima, Koji

2018-01-01

An efficient method for finding a better maximizer of computationally extensive probability distributions is proposed on the basis of a Bayesian optimization technique. A key idea of the proposed method is to use extreme values of acquisition functions by Gaussian processes for the next training phase, which should be located near a local maximum or a global maximum of the probability distribution. Our Bayesian optimization technique is applied to the posterior distribution in the effective physical model estimation, which is a computationally extensive probability distribution. Even when the number of sampling points on the posterior distributions is fixed to be small, the Bayesian optimization provides a better maximizer of the posterior distributions in comparison to those by the random search method, the steepest descent method, or the Monte Carlo method. Furthermore, the Bayesian optimization improves the results efficiently by combining the steepest descent method and thus it is a powerful tool to search for a better maximizer of computationally extensive probability distributions.

Review and Extension of CO2-Based Methods to Determine Ventilation Rates with Application to School Classrooms

Directory of Open Access Journals (Sweden)

Stuart Batterman

2017-02-01

Full Text Available The ventilation rate (VR is a key parameter affecting indoor environmental quality (IEQ and the energy consumption of buildings. This paper reviews the use of CO2 as a “natural” tracer gas for estimating VRs, focusing on applications in school classrooms. It provides details and guidance for the steady-state, build-up, decay and transient mass balance methods. An extension to the build-up method and an analysis of the post-exercise recovery period that can increase CO2 generation rates are presented. Measurements in four mechanically-ventilated school buildings demonstrate the methods and highlight issues affecting their applicability. VRs during the school day fell below recommended minimum levels, and VRs during evening and early morning were on the order of 0.1 h−1, reflecting shutdown of the ventilation systems. The transient mass balance method was the most flexible and advantageous method given the low air change rates and dynamic occupancy patterns observed in the classrooms. While the extension to the build-up method improved stability and consistency, the accuracy of this and the steady-state method may be limited. Decay-based methods did not reflect the VR during the school day due to heating, ventilation and air conditioning (HVAC system shutdown. Since the number of occupants in classrooms changes over the day, the VR expressed on a per person basis (e.g., L·s−1·person−1 depends on the occupancy metric. If occupancy measurements can be obtained, then the transient mass balance method likely will provide the most consistent and accurate results among the CO2-based methods. Improved VR measurements can benefit many applications, including research examining the linkage between ventilation and health.

An extension of compromise ranking method with interval numbers for the evaluation of renewable energy sources

Directory of Open Access Journals (Sweden)

M. Mousavi

2014-06-01

Full Text Available Evaluating and prioritizing appropriate renewable energy sources is inevitably a complex decision process. Various information and conflicting attributes should be taken into account. For this purpose, multi-attribute decision making (MADM methods can assist managers or decision makers in formulating renewable energy sources priorities by considering important objective and attributes. In this paper, a new extension of compromise ranking method with interval numbers is presented for the prioritization of renewable energy sources that is based on the performance similarity of alternatives to ideal solutions. To demonstrate the applicability of the proposed decision method, an application example is provided and the computational results are analyzed. Results illustrate that the presented method is viable in solving the evaluation and prioritization problem of renewable energy sources.

29 CFR 4010.11 - Waivers and extensions.

Science.gov (United States)

2010-07-01

... Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION CERTAIN REPORTING AND DISCLOSURE REQUIREMENTS ANNUAL FINANCIAL AND ACTUARIAL INFORMATION REPORTING § 4010.11 Waivers and extensions. (a) Aggregate funding not in excess of $15 million. Unless reporting is required by § 4010.4(a)(2) or...

Relativistic extension of the Kay-Moses method for constructing transparent potentials in quantum mechanics

International Nuclear Information System (INIS)

Toyama, F.M.; Nogami, Y.; Zhao, Z.

1993-01-01

For the Dirac equation in one space dimension with a potential of the Lorentz scalar type, we present a complete solution for the problem of constructing a transparent potential. This is a relativistic extension of the Kay-Moses method which was developed for the nonrelativistic Schroedinger equation. There is an infinite family of transparent potentials. The potentials are all related to solutions of a class of coupled, nonlinear Dirac equations. In addition, it is argued that an admixture of a Lorentz vector component in the potential impairs perfect transparency

Clinicopathologic Analysis of Microscopic Extension in Lung Adenocarcinoma: Defining Clinical Target Volume for Radiotherapy

International Nuclear Information System (INIS)

Grills, Inga S.; Fitch, Dwight L.; Goldstein, Neal S.; Yan Di; Chmielewski, Gary W.; Welsh, Robert J.; Kestin, Larry L.

2007-01-01

Purpose: To determine the gross tumor volume (GTV) to clinical target volume margin for non-small-cell lung cancer treatment planning. Methods: A total of 35 patients with Stage T1N0 adenocarcinoma underwent wedge resection plus immediate lobectomy. The gross tumor size and microscopic extension distance beyond the gross tumor were measured. The nuclear grade and percentage of bronchoalveolar features were analyzed for association with microscopic extension. The gross tumor dimensions were measured on a computed tomography (CT) scan (lung and mediastinal windows) and compared with the pathologic dimensions. The potential coverage of microscopic extension for two different lung stereotactic radiotherapy regimens was evaluated. Results: The mean microscopic extension distance beyond the gross tumor was 7.2 mm and varied according to grade (10.1, 7.0, and 3.5 mm for Grade 1 to 3, respectively, p < 0.01). The 90th percentile for microscopic extension was 12.0 mm (13.0, 9.7, and 4.4 mm for Grade 1 to 3, respectively). The CT lung windows correlated better with the pathologic size than did the mediastinal windows (gross pathologic size overestimated by a mean of 5.8 mm; composite size [gross plus microscopic extension] underestimated by a mean of 1.2 mm). For a GTV contoured on the CT lung windows, the margin required to cover microscopic extension for 90% of the cases would be 9 mm (9, 7, and 4 mm for Grade 1 to 3, respectively). The potential microscopic extension dosimetric coverage (55 Gy) varied substantially between the stereotactic radiotherapy schedules. Conclusion: For lung adenocarcinomas, the GTV should be contoured using CT lung windows. Although a GTV based on the CT lung windows would underestimate the gross tumor size plus microscopic extension by only 1.2 mm for the average case, the clinical target volume expansion required to cover the microscopic extension in 90% of cases could be as large as 9 mm, although considerably smaller for high-grade tumors

Analysis of the extension and reduction method of qualified life used in equipment with ambiental qualification

International Nuclear Information System (INIS)

Serrano R, M.L. .e -mail: mlserrano@cnsns.gob.mx

2005-01-01

With the purpose of reducing costs of acquisition, maintenance, design, hour-man, dose, production, etc. or by changes in the temperature of service, diverse Nuclear Plants (NP) in the world have been carried out extensions and reductions of life of equipment and/or components related with the safety. The used methods are mainly tests type on equipment or component aged quickly, tests type on equipment or component aged naturally and use of the Arrhenius model with monitoring of temperatures in place. The present article carries out an analysis of the Arrhenius model with monitoring of temperatures in place, which is presented in two variants, equation (1) and (2), since it is the but used by the NP with extension purposes and reduction of qualified life. As back information, it was made one search of investigations, applied to diverse fields of the science that try about the reliability of the results provided by Arrhenius for the aging case. The results of the analysis indicate: I) that this method make uncertainties in some intervals of temperature and 2) which of the two variants it provides data more reliable. (Author)

Quality functions for requirements engineering in system development methods.

Science.gov (United States)

Johansson, M; Timpka, T

1996-01-01

Based on a grounded theory framework, this paper analyses the quality characteristics for methods to be used for requirements engineering in the development of medical decision support systems (MDSS). The results from a Quality Function Deployment (QFD) used to rank functions connected to user value and a focus group study were presented to a validation focus group. The focus group studies take advantage of a group process to collect data for further analyses. The results describe factors considered by the participants as important in the development of methods for requirements engineering in health care. Based on the findings, the content which, according to the user a MDSS method should support is established.

The method of life extension for the High Flux Isotope Reactor vessel

International Nuclear Information System (INIS)

Chang, Shib-Jung.

1995-01-01

The state of the vessel steel embrittlement as a result of neutron irradiation can be measured by its increase in the nil ductility temperature (NDT). This temperature is sometimes referred to as the brittle-ductile transition temperature (DBT) for fracture. The life extension of the High Flux Isotope Reactor (HFIR) vessel is calculated by using the method of fracture mechanics. A hydrostatic pressure test (hydrotest) is performed in order to determine a safe vessel static pressure. It is then followed by using fracture mechanics to project the reactor life from the safe hydrostatic pressure. The life extension calculation provides the following information on the remaining life of the reactor as a function of the nil ductility temperature increase: the probability of vessel fracture due to hydrotest vs vessel life at several hydrotest pressures; the hydrotest time interval vs the uncertainty of the nil ductility temperature increase rate; and the hydrotest pressure vs the uncertainty of the nil ductility temperature increase rate. It is understood that the use of a complete range of uncertainties of the nil ductility temperature increase is equivalent to the entire range of radiation damage that can be experienced by the vessel steel. From the numerical values for the probabilities of the vessel fracture as a result of hydrotest, it is estimated that the reactor vessel life can be extended up to 50 EFPY (100 MW) with the minimum vessel operating temperature equal to 85 degree F

Standard test method for determination of resistance to stable crack extension under low-constraint conditions

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This standard covers the determination of the resistance to stable crack extension in metallic materials in terms of the critical crack-tip-opening angle (CTOAc), ψc and/or the crack-opening displacement (COD), δ5 resistance curve (1). This method applies specifically to fatigue pre-cracked specimens that exhibit low constraint (crack-length-to-thickness and un-cracked ligament-to-thickness ratios greater than or equal to 4) and that are tested under slowly increasing remote applied displacement. The recommended specimens are the compact-tension, C(T), and middle-crack-tension, M(T), specimens. The fracture resistance determined in accordance with this standard is measured as ψc (critical CTOA value) and/or δ5 (critical COD resistance curve) as a function of crack extension. Both fracture resistance parameters are characterized using either a single-specimen or multiple-specimen procedures. These fracture quantities are determined under the opening mode (Mode I) of loading. Influences of environment a...

Core competency requirements among extension workers in peninsular Malaysia: Use of Borich's needs assessment model.

Science.gov (United States)

Umar, Sulaiman; Man, Norsida; Nawi, Nolila Mohd; Latif, Ismail Abd; Samah, Bahaman Abu

2017-06-01

The study described the perceived importance of, and proficiency in core agricultural extension competencies among extension workers in Peninsular Malaysia; and evaluating the resultant deficits in the competencies. The Borich's Needs Assessment Model was used to achieve the objectives of the study. A sample of 298 respondents was randomly selected and interviewed using a pre-tested structured questionnaire. Thirty-three core competency items were assessed. Instrument validity and reliability were ensured. The cross-sectional data obtained was analysed using SPSS for descriptive statistics including mean weighted discrepancy score (MWDS). Results of the study showed that on a scale of 5, the most important core extension competency items according to respondents' perception were: "Making good use of information and communication technologies/access and use of web-based resources" (M=4.86, SD=0.23); "Conducting needs assessments" (M=4.84, SD=0.16); "organizing extension campaigns" (M=4.82, SD=0.47) and "Managing groups and teamwork" (M=4.81, SD=0.76). In terms of proficiency, the highest competency identified by the respondents was "Conducting farm and home visits (M=3.62, SD=0.82) followed by 'conducting meetings effectively' (M=3.19, SD=0.72); "Conducting focus group discussions" (M=3.16, SD=0.32) and "conducting community forums" (M=3.13, SD=0.64). The discrepancies implying competency deficits were widest in "Acquiring and allocating resources" (MWDS=12.67); use of information and communication technologies (ICTs) and web-based resources in agricultural extension (MWDS=12.59); and report writing and sharing the results and impacts (MWDS=11.92). It is recommended that any intervention aimed at developing the capacity of extension workers in Peninsular Malaysia should prioritize these core competency items in accordance with the deficits established in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dissolution curve comparisons through the F(2) parameter, a Bayesian extension of the f(2) statistic.

Science.gov (United States)

Novick, Steven; Shen, Yan; Yang, Harry; Peterson, John; LeBlond, Dave; Altan, Stan

2015-01-01

Dissolution (or in vitro release) studies constitute an important aspect of pharmaceutical drug development. One important use of such studies is for justifying a biowaiver for post-approval changes which requires establishing equivalence between the new and old product. We propose a statistically rigorous modeling approach for this purpose based on the estimation of what we refer to as the F2 parameter, an extension of the commonly used f2 statistic. A Bayesian test procedure is proposed in relation to a set of composite hypotheses that capture the similarity requirement on the absolute mean differences between test and reference dissolution profiles. Several examples are provided to illustrate the application. Results of our simulation study comparing the performance of f2 and the proposed method show that our Bayesian approach is comparable to or in many cases superior to the f2 statistic as a decision rule. Further useful extensions of the method, such as the use of continuous-time dissolution modeling, are considered.

Structural considerations in nuclear life extension

International Nuclear Information System (INIS)

Dodson, W.B.; McHale, P.F.

1986-01-01

The ability to extend the licensed life of a nuclear power plant requires that technical, economic, and regulatory criteria be satisfied. Two ongoing Electric Power Research Institute/US Department of Energy funded pilot studies are looking at the technical and economic aspects from a plant wide viewpoint to life extension. In each, structures have been identified to have a potentially strong effect on the viability for extended life because of the possible major cost, schedule, and person-rem factors should major refurbishment, modifications, or replacement be required. This paper reviews the degradation mechanisms and counterbalancing design features for one of these pilot plants in the studies. It further reviews the recommended ongoing practices to be followed to better ensure that life extension for the structures remains a future option

Economic modeling for life extension decision making

International Nuclear Information System (INIS)

Farber, M.A.; Harrison, D.L.; Carlson, D.D.

1986-01-01

This paper presents a methodology for the economic and financial analysis of nuclear plant life extension under uncertainty and demonstrates its use in a case analysis. While the economic and financial evaluation of life extension does not require new analytical tools, such studies should be based on the following three premises. First, the methodology should examine effects at the level of the company or utility system, because the most important economic implications of life extension relate to the altered generation system expansion plan. Second, it should focus on the implications of uncertainty in order to understand the factors that most affect life extension benefits and identify risk management efforts. Third, the methodology should address multiple objectives, at a minimum, both economic and financial objectives

Perspective of agricultural extension in livestock production in ...

African Journals Online (AJOL)

The extension communication methods used were visits, demonstration, workshop, training and excursion. The benefits of extension services were introduction of livestock species, marketing information, feed and feed ingredient supply, disease and pest control, and liaison services. Constraints to the use of extension ...

Linear programming foundations and extensions

CERN Document Server

Vanderbei, Robert J

2001-01-01

Linear Programming: Foundations and Extensions is an introduction to the field of optimization. The book emphasizes constrained optimization, beginning with a substantial treatment of linear programming, and proceeding to convex analysis, network flows, integer programming, quadratic programming, and convex optimization. The book is carefully written. Specific examples and concrete algorithms precede more abstract topics. Topics are clearly developed with a large number of numerical examples worked out in detail. Moreover, Linear Programming: Foundations and Extensions underscores the purpose of optimization: to solve practical problems on a computer. Accordingly, the book is coordinated with free efficient C programs that implement the major algorithms studied: -The two-phase simplex method; -The primal-dual simplex method; -The path-following interior-point method; -The homogeneous self-dual methods. In addition, there are online JAVA applets that illustrate various pivot rules and variants of the simplex m...

Reality Check: OK Extension Helps Teachers Meet Financial Education Requirements

Science.gov (United States)

St. Pierre, Eileen; Simpson, Mickey; Moffat, Susan; Cothren, Phillis

2011-01-01

According to the Jump$tart Coalition, Oklahoma is one of 24 states to adopt financial education requirements for students (Jump$tart Coalition, 2010). The Passport to Financial Literacy Act of 2007, Oklahoma House Bill 1476, requires Oklahoma students in grades 7 through 12 to fulfill established financial literacy requirements to graduate with a…

Quantitative methods for developing C2 system requirement

Energy Technology Data Exchange (ETDEWEB)

Tyler, K.K.

1992-06-01

The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the communications gap'' between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

Proposal for Requirement Validation Criteria and Method Based on Actor Interaction

Science.gov (United States)

Hattori, Noboru; Yamamoto, Shuichiro; Ajisaka, Tsuneo; Kitani, Tsuyoshi

We propose requirement validation criteria and a method based on the interaction between actors in an information system. We focus on the cyclical transitions of one actor's situation against another and clarify observable stimuli and responses based on these transitions. Both actors' situations can be listed in a state transition table, which describes the observable stimuli or responses they send or receive. Examination of the interaction between both actors in the state transition tables enables us to detect missing or defective observable stimuli or responses. Typically, this method can be applied to the examination of the interaction between a resource managed by the information system and its user. As a case study, we analyzed 332 requirement defect reports of an actual system development project in Japan. We found that there were a certain amount of defects regarding missing or defective stimuli and responses, which can be detected using our proposed method if this method is used in the requirement definition phase. This means that we can reach a more complete requirement definition with our proposed method.

Solution of Fractional Partial Differential Equations in Fluid Mechanics by Extension of Some Iterative Method

Directory of Open Access Journals (Sweden)

A. A. Hemeda

2013-01-01

Full Text Available An extension of the so-called new iterative method (NIM has been used to handle linear and nonlinear fractional partial differential equations. The main property of the method lies in its flexibility and ability to solve nonlinear equations accurately and conveniently. Therefore, a general framework of the NIM is presented for analytical treatment of fractional partial differential equations in fluid mechanics. The fractional derivatives are described in the Caputo sense. Numerical illustrations that include the fractional wave equation, fractional Burgers equation, fractional KdV equation, fractional Klein-Gordon equation, and fractional Boussinesq-like equation are investigated to show the pertinent features of the technique. Comparison of the results obtained by the NIM with those obtained by both Adomian decomposition method (ADM and the variational iteration method (VIM reveals that the NIM is very effective and convenient. The basic idea described in this paper is expected to be further employed to solve other similar linear and nonlinear problems in fractional calculus.

NDE and plant life extension

International Nuclear Information System (INIS)

Liu, S.N.; Ammirato, F.V.; Nottingham, L.D.

1991-01-01

Component life extension is the process of making run-repair-replace decisions for plant components and includes a thorough analysis of the capability of the component to perform throughout the projected lifetime. For many critical plant components, nondestructive evaluation (NDE) is essential in determining whether the component can be operated safely and economically in the extended life period and to help utilities determine safe and economic inspection intervals. NDE technology is required for not only detecting defects that could grow to a size of concern during extended lifetimes, but also will be called upon to measure and monitor accumulating material degradation that strongly affects component reliability. This paper discusses the role of NDE in life extension by reviewing three examples--a reactor pressure vessel, steam turbine-generator rotors, and generator retaining rings. In each example, the contribution of NDE to life extension decisions is described. (author)

On Central Extensions of Associative Dialgebras

Science.gov (United States)

Rakhimov, Isamiddin S.

2016-03-01

The concept of central extensions plays an important in constructing extensions of algebras. This technique has been successfully used in the classification problem of certain classes of algebras. In 1978 Skjelbred and Sund reduced the classification of nilpotent Lie algebras in a given dimension to the study of orbits under the action of automorphism group on the space of second degree cohomology of a smaller Lie algebra with coefficients in a trivial module. Then W. de Graaf applied the Skjelbred and Sund method to the classification problem of low-dimensional nilpotent Lie and associative algebras over some fields. The main purpose of this note is to establish elementary properties of central extensions of associative dialgebras and apply the above mentioned method to the classification of low dimensional nilpotent associative dialgebras.

Analysis of moiré fringes by Wiener filtering: An extension to the Fourier method

International Nuclear Information System (INIS)

Harasse, Sébastien; Yashiro, Wataru; Momose, Atsushi

2012-01-01

In X-ray Talbot interferometry, tilting the phase grating with respect to the absorption grating results in the formation of spatial fringes. The analysis of this moiré pattern, classically performed by the Fourier method, allows the extraction of the sample phase shift information from a single image. In this context, an extension to the Fourier method is proposed. The filter used to extract the fringe information is chosen optimally in the least-squares sense, given models for the zeroth and first order modes, noise and the modulation transfer function. The latter is obtained by measuring the detector response to moiré fringes with increasing frequencies. The obtained Wiener filter allows a better reconstruction of the phase information at all fringe frequencies, compared to the usual box or gaussian filters. This is demonstrated quantitatively by experiments using synchrotron radiation.

A service life extension (SLEP) approach to operating aging aircraft beyond their original design lives

Science.gov (United States)

Pentz, Alan Carter

With today's uncertain funding climate (including sequestration and continuing budget resolutions), decision makers face severe budgetary challenges to maintain dominance through all aspects of the Department of Defense (DoD). To meet war-fighting capabilities, the DoD continues to extend aircraft programs beyond their design service lives by up to ten years, and occasionally much more. The budget requires a new approach to traditional extension strategies (i.e., reuse, reset, and reclamation) for structural hardware. While extending service life without careful controls can present a safety concern, future operations planning does not consider how much risk is present when operating within sound structural principles. Traditional structural hardware extension methods drive increased costs. Decision makers often overlook the inherent damage tolerance and fatigue capability of structural components and rely on simple time- and flight-based cycle accumulation when determining aircraft retirement lives. This study demonstrates that decision makers should consider risk in addition to the current extension strategies. Through an evaluation of eight military aircraft programs and the application and simulation of F-18 turbine engine usage data, this dissertation shows that insight into actual aircraft mission data, consideration of fatigue capability, and service extension length are key factors to consider. Aircraft structural components, as well as many critical safety components and system designs, have a predefined level of conservatism and inherent damage tolerance. The methods applied in this study would apply to extensions of other critical structures such as bridges. Understanding how much damage tolerance is built into the design compared to the original design usage requirements presents the opportunity to manage systems based on risk. The study presents the sensitivity of these factors and recommends avenues for further research.

Extensive actinomycosis of the face requiring radical resection and facial nerve reconstruction.

Science.gov (United States)

Iida, Takuya; Takushima, Akihiko; Asato, Hirotaka; Harii, Kiyonori

2006-01-01

We present a case of extensive actinomycosis of the face, which appeared after dental surgery. Since antibiotic therapy was ineffective, the lesion was radically resected, and the skin, soft tissue and facial nerve were reconstructed using a free rectus abdominis musculocutaneous flap and simultaneously harvested intercostal nerves. Successful reanimation of the face was achieved 14 months postoperatively.

Experimental logistics plan in support of Extensive Separations for Hanford tank waste remediation systems

International Nuclear Information System (INIS)

Enderlin, W.I.; Swanson, J.L.; Carlson, C.D.; Hirschi, E.J.

1993-12-01

All proposed methods for remediating the radioactive and chemical waste stored in single- and double-shell tanks (SSTs and DSTs) at the Hanford Site require the separation of the waste mixtures in the tank into high-level and low-level fractions, the safe transport of this separated waste to appropriate immobilization facilities, and the long-term disposal of the immobilized waste forms. Extensive experimentation, especially in waste separations, will be required to develop the technologies and to produce the data that support the most effective and safe cleanup processes. As part of this effort, Pacific Northwest Laboratory (PNL) is developing this detailed experimental logistics plan to determine the logistical/resource requirements, and ultimately the critical paths, necessary to effectively and safely conduct the multitude of experiments within the Extensive Separations Development Program, which addresses the experimental needs of a concept that provides a high degree of separation for the high-level and low-level waste fractions. The logistics issues developed for this program are expected to be similar to those for other programs aimed at remediating and disposing of the wastes

Requirements for the retrofitting an extension of the maximum voltage power grid from the point of view of environmental protection and cultivated landscape work; Anforderungen an den Um- und Ausbau des Hoechstspannungsstromnetzes. Aus der Sicht von Naturschutz und Kulturlandschaftspflege

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-15

The project on the requirements for the retrofitting an extension of the maximum voltage power grid from the point of view of environmental protection and cultivated landscape work includes contributions on the following topics: the development of the European transmission grid, the grid extension law, restrictions for the power grid and their infrastructure, requirements for the regulations concerning the realization of the transnational grid extension, inclusion of the public - public acceptance - communication, requirements concerning the environmental compensation law, overhead line - underground cable - health hazards, ecological effects of overhead lines and underground cables, infrastructural projects, power supply in the future, structural relief by photovoltaics.

Self-adjoint extensions and spectral analysis in the Calogero problem

International Nuclear Information System (INIS)

Gitman, D M; Tyutin, I V; Voronov, B L

2010-01-01

In this paper, we present a mathematically rigorous quantum-mechanical treatment of a one-dimensional motion of a particle in the Calogero potential αx -2 . Although the problem is quite old and well studied, we believe that our consideration based on a uniform approach to constructing a correct quantum-mechanical description for systems with singular potentials and/or boundaries, proposed in our previous works, adds some new points to its solution. To demonstrate that a consideration of the Calogero problem requires mathematical accuracy, we discuss some 'paradoxes' inherent in the 'naive' quantum-mechanical treatment. Using a self-adjoint extension method, we construct and study all possible self-adjoint operators (self-adjoint Hamiltonians) associated with a formal differential expression for the Calogero Hamiltonian. In particular, we discuss a spontaneous scale-symmetry breaking associated with self-adjoint extensions. A complete spectral analysis of all self-adjoint Hamiltonians is presented.

EPRI/DOE nuclear plant life extension overview

International Nuclear Information System (INIS)

Carey, J.J.; Lapides, M.E.; Harrison, D.; Ducharme, A.

1987-01-01

Recognizing the major investment in current U.S. nuclear capacity and the excellent prospects that these units have a useful life substantially in excess of their 40 year license term, EPRI and DOE have jointly undertaken a comprehensive, multiyear, nuclear plant life extension program. The program, which has its antecedents in EPRI studies of 1978-9, aims to support U.S. utilities, first in verifying the requirements of extended operation and then in implementing a plan for achieving extended service and license renewal. The effort, begun in 1985, has already yielded numerous benefits and is expected to further aid in improving near-term performance of nuclear units. A utility LWR Plant Life Extension Committee has been established to provide overview and guidance to the DOE/EPRI research and development activities and also to develop and integrate utility responses to licensing and codes and standards issues. Pilot study projects, performed by Virginia Power and Northern States Power, were the initial EPRI/DOE focus. This base has gradually expanded to incorporate other utilities and generating units, as well as a broad base of technology support. The latter includes: a) economic and financial analysis methods applicable at the unit, region and national level, b) long-term materials deterioration analysis and sampling, c) component life prediction methods and d) refurbishment and repair evaluations. This paper presents the history and status of the overall EPRI/DOE program

Hidden Markov models for sequence analysis: extension and analysis of the basic method

DEFF Research Database (Denmark)

Hughey, Richard; Krogh, Anders Stærmose

1996-01-01

-maximization training procedure is relatively straight-forward. In this paper,we review the mathematical extensions and heuristics that move the method from the theoreticalto the practical. Then, we experimentally analyze the effectiveness of model regularization,dynamic model modification, and optimization strategies......Hidden Markov models (HMMs) are a highly effective means of modeling a family of unalignedsequences or a common motif within a set of unaligned sequences. The trained HMM can then beused for discrimination or multiple alignment. The basic mathematical description of an HMMand its expectation....... Finally it is demonstrated on the SH2domain how a domain can be found from unaligned sequences using a special model type. Theexperimental work was completed with the aid of the Sequence Alignment and Modeling softwaresuite....

Solutions to Burnout and Retention as Perceived by County Extension Agents of the Colorado State University Extension System

Directory of Open Access Journals (Sweden)

Matt Benge

2015-02-01

Full Text Available This study explored solutions to the issue of burnout and retention of Extension agents. Extension agents experience burnout for reasons such as long hours, stress, and organizational factors. As Extension administration addresses job satisfaction and performance of Extension employees, burnout and retention issues identified in this study can facilitate efforts to enhance the effectiveness of a statewide Extension program. Herzberg’s Motivation-Hygiene Theory was the theoretical framework for this study. Researchers used the constant-comparative method of analysis to identify recurring themes from the open-ended items of an online-administered survey. Twelve primary themes emerged, including (a compensation, (b hiring practices, (c promotion and advancement within Extension, (d organizational support regarding agent development, (e organizational support regarding administration, (f organizational support regarding colleagues, (g reporting, (h recognition, (i resources, (j personnel and staffing, (k evaluation of administration and specialists, and (l workload. Results suggest that Extension administration should focus on the maintenance factors of compensation, workload, and internal promotion and advancement, as well as motivating factors, to improve retention of Extension agents.

Life extension economic analysis

International Nuclear Information System (INIS)

Smithling, A.P.

1992-01-01

Life extension economic analyses of fossil fueled power plants need the development of consistent methods which consider the capital costs associated with component replacement or repair and estimates of normal station capital expenditures over the units remaining life. In order to link capital and production costs, Niagra Mohawk Power Corp. develops most and worst cases. A most case includes capital components that would definitely need replacement or modification for life extension. The worst case scenario contains must case capital costs plus various components which may need replacement or modification. In addition, two forecasted conditions are used, base case capacity and low capacity

Managing BWR plant life extension

International Nuclear Information System (INIS)

Ianni, P.W.; Kiss, E.

1985-01-01

Recent studies have confirmed that extending the useful life of a large nuclear plant can be justified with very high cost benefit ratio. In turn, experience with large power plant systems and equipment has shown that a well-integrated and -managed plan is essential in order to achieve potential economic benefits. Consequently, General Electric's efforts have been directed at establishing a life extension plan that considers alternative options and cost-effective steps that can be taken in early life, those appropriate during middle life, and those required in late life. This paper briefly describes an approach designed to provide the plant owner a maximum of flexibility in developing a life extension plan

Division File of Extension Research Materials; Additions During 1968.

Science.gov (United States)

Byrn, Darcie, Comp.

In this annotated bibliography of acquisitions during 1968 appear 265 Extension studies on administrative organization and management; training and staff development; mobilizing participation in Extension work; local leadership; program content and planning procedures; general effectiveness and progress in Extension; teaching methods, techniques,…

Lubin-Tate extensions, an elementary approach

International Nuclear Information System (INIS)

Ershov, Yu L

2007-01-01

We give an elementary proof of the assertion that the Lubin-Tate extension L≥K is an Abelian extension whose Galois group is isomorphic to U K /N L/K (U L ) for arbitrary fields K that have Henselian discrete valuation rings with finite residue fields. The term 'elementary' only means that the proofs are algebraic (that is, no transcedental methods are used)

77 FR 47590 - Notice of Request for a Revision to and Extension of Approval of an Information Collection...

Science.gov (United States)

2012-08-09

... requirements or power calculations that justify the proposed sample size, the expected response rate, methods...] Notice of Request for a Revision to and Extension of Approval of an Information Collection; Qualitative... associated with qualitative customer and stakeholder feedback on service delivery by the Animal and Plant...

Extension of the comet method to 2-D hexagonal geometry

International Nuclear Information System (INIS)

Connolly, Kevin John; Rahnema, Farzad; Zhang, Dingkang

2011-01-01

The capability of the heterogeneous coarse mesh radiation transport (COMET) method developed at Georgia Tech has been expanded. COMET is now able to treat hexagonal geometry in two dimensions, allowing reactor problems to be solved for those next-generation reactors which utilize prismatic block structure and hexagonal lattice geometry in their designs. The COMET method is used to solve whole core reactor analysis problems without resorting to homogenization or low-order transport approximations. The eigenvalue and fission density distribution of the reactor are determined iteratively using response functions. The method has previously proven accurate in solving PWR, BWR, and CANDU eigenvalue problems. In this paper, three simple test cases inspired by high temperature test reactor material cross sections and fuel block geometry are presented. These cases are given not in an attempt to model realistic nuclear power systems, but in order to test the ability of the improved method. Solutions determined by the new hexagonal version of COMET, COMET-Hex, are compared with solutions determined by MCNP5, and the results show the accuracy and efficiency of the improved COMET-Hex method in calculating the eigenvalue and fuel pin fission density in sample full-core problems. COMETHex determines the eigenvalues of these simple problems to an order of within 50 pcm of the reference solutions and all pin fission densities to an average error of 0.2%, and it requires fewer than three minutes to produce these results. (author)

DFTB3: Extension of the self-consistent-charge density-functional tight-binding method (SCC-DFTB).

Science.gov (United States)

Gaus, Michael; Cui, Qiang; Elstner, Marcus

2012-04-10

The self-consistent-charge density-functional tight-binding method (SCC-DFTB) is an approximate quantum chemical method derived from density functional theory (DFT) based on a second-order expansion of the DFT total energy around a reference density. In the present study we combine earlier extensions and improve them consistently with, first, an improved Coulomb interaction between atomic partial charges, and second, the complete third-order expansion of the DFT total energy. These modifications lead us to the next generation of the DFTB methodology called DFTB3, which substantially improves the description of charged systems containing elements C, H, N, O, and P, especially regarding hydrogen binding energies and proton affinities. As a result, DFTB3 is particularly applicable to biomolecular systems. Remaining challenges and possible solutions are also briefly discussed.

Agricultural extension and mass media.

Science.gov (United States)

Perraton, H

1983-12-01

To learn more about the use of the mass media for agricultural extension, the World Bank has considered the efforts of 2 units: INADES-formation in West Africa and the Extension Aids Branch of Malawi. The INADES-formation study focuses on Cameroon but also considers work in Rwanda and the Ivory Coast. Some general conclusions emerge from a comparison of the 2 organizations. Malawi operates an extension service which reaches farmers through extension agents, through farmer training centers, and through mass media. The Extension Aids Branch (EAB) has responsibility for its media work and broadcasts 4 1/2 hours of radio each week. Its 6 regular radio programs include a general program which interviews farmers, a music request program in which the music is interspersed with farming advice, a farming family serial, and a daily broadcast of agricultural news and information. The 17 cinema vans show some agricultural films, made by EAB, some entertainment films, and some government information films from departments other than the ministry of agriculture. EAB also has a well-developed program of research and evaluation of its own work. INADES-formation, the training section of INADES, works towards social and economic development of the population. It teaches peasant farmers and extension agents and does this through running face-to-face seminars, by publishing a magazine, "Agripromo," and through correspondence courses. In 1978-79 INADES-formation enrolled some 4500 farmers and extension agents as students. Both of these organizations work to teach farmers better agriculture techniques, and both were created in response to the fact that agricultural extension agents cannot meet all the farmers in their area. Despite the similarity of objective, there are differences in methods and philosophy. The EAB works in a single country and uses a variety of mass media, with print playing a minor role. INADES-formation is an international and nongovernmental organization and its

Determination of fuel irradiation parameters. Required accuracies and available methods

International Nuclear Information System (INIS)

Mas, P.

1977-01-01

This paper reports on the present point of some main methods to determine the nuclear parameters of fuel irradiation in testing reactors (nuclear power, burn up, ...) The different methods (theoretical or experimental) are reviewed: neutron measurements and calculations, gamma scanning, heat balance, ... . The required accuracies are reviewed: they are of 3-5 % on flux, fluences, nuclear power, burn-up, conversion factor. These required accuracies are compared with the real accuracies available which are the present time of order of 5-20 % on these parameters

Determination of material irradiation parameters. Required accuracies and available methods

International Nuclear Information System (INIS)

Cerles, J.M.; Mas, P.

1978-01-01

In this paper, the author reports some main methods to determine the nuclear parameters of material irradiation in testing reactor (nuclear power, burn-up, fluxes, fluences, ...). The different methods (theoretical or experimental) are reviewed: neutronics measurements and calculations, gamma scanning, thermal balance, ... The required accuracies are reviewed: they are of 3-5% on flux, fluences, nuclear power, burn-up, conversion factor, ... These required accuracies are compared with the real accuracies available which are at the present time of order of 5-20% on these parameters

Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

Science.gov (United States)

England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.

2008-01-01

This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

Self-adjoint extensions and spectral analysis in the Calogero problem

Energy Technology Data Exchange (ETDEWEB)

Gitman, D M [Institute of Physics, University of Sao Paulo (Brazil); Tyutin, I V; Voronov, B L [Lebedev Physical Institute, Moscow (Russian Federation)], E-mail: gitman@dfn.if.usp.br, E-mail: tyutin@lpi.ru, E-mail: voronov@lpi.ru

2010-04-09

In this paper, we present a mathematically rigorous quantum-mechanical treatment of a one-dimensional motion of a particle in the Calogero potential {alpha}x{sup -2}. Although the problem is quite old and well studied, we believe that our consideration based on a uniform approach to constructing a correct quantum-mechanical description for systems with singular potentials and/or boundaries, proposed in our previous works, adds some new points to its solution. To demonstrate that a consideration of the Calogero problem requires mathematical accuracy, we discuss some 'paradoxes' inherent in the 'naive' quantum-mechanical treatment. Using a self-adjoint extension method, we construct and study all possible self-adjoint operators (self-adjoint Hamiltonians) associated with a formal differential expression for the Calogero Hamiltonian. In particular, we discuss a spontaneous scale-symmetry breaking associated with self-adjoint extensions. A complete spectral analysis of all self-adjoint Hamiltonians is presented.

Effective Use of Facebook for Extension Professionals

Science.gov (United States)

Mains, Mark; Jenkins-Howard, Brooke; Stephenson, Laura

2013-01-01

As the use of social media increases, Extension is challenged to stay relevant with cliental by using digital tools. This article illustrates how Facebook can be part of Extension's repertoire of methods for communication, program implementation, education, and marketing. This allows professionals to build social networking capacity with…

Java Architecture for Detect and Avoid Extensibility and Modeling

Science.gov (United States)

Santiago, Confesor; Mueller, Eric Richard; Johnson, Marcus A.; Abramson, Michael; Snow, James William

2015-01-01

Unmanned aircraft will equip with a detect-and-avoid (DAA) system that enables them to comply with the requirement to "see and avoid" other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. This paper describes a capability called Java Architecture for Detect and Avoid Extensibility and Modeling (JADEM), developed to prototype and help evaluate various DAA technological requirements by providing a flexible and extensible software platform that models all major detect-and-avoid functions. Figure 1 illustrates JADEM's architecture. The surveillance module can be actual equipment on the unmanned aircraft or simulators that model the process by which sensors on-board detect other aircraft and provide track data to the traffic display. The track evaluation function evaluates each detected aircraft and decides whether to provide an alert to the pilot and its severity. Guidance is a combination of intruder track information, alerting, and avoidance/advisory algorithms behind the tools shown on the traffic display to aid the pilot in determining a maneuver to avoid a loss of well clear. All these functions are designed with a common interface and configurable implementation, which is critical in exploring DAA requirements. To date, JADEM has been utilized in three computer simulations of the National Airspace System, three pilot-in-the-loop experiments using a total of 37 professional UAS pilots, and two flight tests using NASA's Predator-B unmanned aircraft, named Ikhana. The data collected has directly informed the quantitative separation standard for "well clear", safety case, requirements development, and the operational environment for the DAA minimum operational performance standards. This work was performed by the Separation Assurance/Sense and Avoid Interoperability team under NASA's UAS Integration in the NAS project.

Community Health: FCS Extension Educators Deliver Diabetes Education in PA

Science.gov (United States)

Cox, Jill N.; Corbin, Marilyn

2011-01-01

For decades, family and consumer sciences (FCS) Extension educators have provided health related education to consumers through Cooperative Extension programming at land grant universities. However, offering diabetes education can be extra challenging due to the complicated nature of the disease and the multi-faceted treatment required. Faced with…

Software Safety Analysis of Digital Protection System Requirements Using a Qualitative Formal Method

International Nuclear Information System (INIS)

Lee, Jang-Soo; Kwon, Kee-Choon; Cha, Sung-Deok

2004-01-01

The safety analysis of requirements is a key problem area in the development of software for the digital protection systems of a nuclear power plant. When specifying requirements for software of the digital protection systems and conducting safety analysis, engineers find that requirements are often known only in qualitative terms and that existing fault-tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. A framework for the requirements engineering process is proposed that consists of a qualitative method for requirements specification, called the qualitative formal method (QFM), and a safety analysis method for the requirements based on causality information, called the causal requirements safety analysis (CRSA). CRSA is a technique that qualitatively evaluates causal relationships between software faults and physical hazards. This technique, extending the qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and the relationship among them. The QFM and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital protection system example

Concepts in local treatment of extensive paediatric burns

Science.gov (United States)

Ungureanu, M

2014-01-01

Abstract There is a wide variety of local therapeutical methods for extensive burns. This article aims to be a general overview of the most common methods used in the local treatment for extensive burns, both in our clinic and globally. Clinical examples are shown from our clinic; cases of the last 8 years. None of the less there is no such thing as the "perfect method of treatment" but a thin balance between the clinical experience of plastic surgeons, every case particularities and specified characteristics, meaning advantages, disadvantages and limited indications of local topics or methods of skin covering. PMID:25408723

A Method for Recognizing State of Finger Flexure and Extension

Science.gov (United States)

Terado, Toshihiko; Fujiwara, Osamu

In our country, the handicapped and the elderly people in bed increase rapidly. In the bedridden person’s daily life, there may be limitations in the physical movement and the means of mutual communication. For the support of their comfortable daily lives, therefore, the development of human interface equipment becomes an important task. The equipment of this kind is being already developed by means of laser beam, eye-tracking, breathing motion and myo-electric signals, while the attachment and handling are normally not so easy. In this study, paying attention to finger motion, we have developed human interface equipment easily attached to the body, which enables one to measure the finger flexure and extension for mutual communication. The state of finger flexure and extension is identified by a threshold level analysis from the 3D-locus data for the finger movement, which can be measured through the infrared rays from the LED markers attached to a glove with the previously developed prototype system. We then have confirmed from an experiment that nearly 100% recognition for the finger movement can be achieved.

5 CFR 610.404 - Requirement for time-accounting method.

Science.gov (United States)

2010-01-01

... REGULATIONS HOURS OF DUTY Flexible and Compressed Work Schedules § 610.404 Requirement for time-accounting method. An agency that authorizes a flexible work schedule or a compressed work schedule under this...

Effective teaching methods in higher education: requirements and barriers

Directory of Open Access Journals (Sweden)

NAHID SHIRANI BIDABADI

2016-10-01

Full Text Available Introduction: Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. Methods: This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors. Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. Results: According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors’ behavior and some of these are prerequisite in professors’ outlook. Also, there are some major barriers, some of which are associated with the professors’ operation and others are related to laws and regulations. Implications of these findings for teachers’ preparation in education are discussed. Conclusion: In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities

A glacier runoff extension to the Precipitation Runoff Modeling System

Science.gov (United States)

A. E. Van Beusekom; R. J. Viger

2016-01-01

A module to simulate glacier runoff, PRMSglacier, was added to PRMS (Precipitation Runoff Modeling System), a distributed-parameter, physical-process hydrological simulation code. The extension does not require extensive on-glacier measurements or computational expense but still relies on physical principles over empirical relations as much as is feasible while...

DETERMINATION OF ADHESIVE STRENGTH LAYER’S ROLLER COMPACTED CONCRETE THE METHOD AXIAL EXTENSION

Directory of Open Access Journals (Sweden)

Tang Van Lam

2017-07-01

Full Text Available Roller compacted concrete for the construction of hydraulic and hydroelectric buildings is a composite material, which consists of a binder, fine aggregate (sand, coarse aggregate (gravel or crushed stone, water and special additives that provide the desired concrete workability and impart the required concrete performance properties. Concrete mixture is prepared at from concrete mixing plants strictly metered quantities of cement, water, additives and graded aggregates, whereupon they are delivered to the site laying Mixer Truck and sealing layers with each stack layer. The advantages of roller compaction technology should include the reduction of construction time, which allows fast commissioning construction projects, as well as reduce the amount of investment required. One of the main problems encountered in the process of roller compaction of the concrete mix is the need to provide the required adhesion strength between layers of concrete. This paper presents a method for determining the strength of adhesion between the concrete layers of different ages roller compacted concrete using axial tension. This method makes it possible to obtain objective and accurate results with a total thickness of layers of compacted concrete of up to 300…400 mm. Results from this method, studies have shown that the value of strength between the concrete layers in addition to the composition of the concrete and adhesion depends on the quality and the parallel end surfaces of the cylinder-models, which are mounted steel plates for axial tension, as well as the state of the contact surfaces of the concrete layer. The method can be used to determine the strength of interlayer adhesion in roller compacted concrete, which are used in the construction of dams and other hydraulic structures.

Rapid methods for jugular bleeding of dogs requiring one technician.

Science.gov (United States)

Frisk, C S; Richardson, M R

1979-06-01

Two methods were used to collect blood from the jugular vein of dogs. In both techniques, only one technician was required. A rope with a slip knot was placed around the base of the neck to assist in restraint and act as a tourniquet for the vein. The technician used one hand to restrain the dog by the muzzle and position the head. The other hand was used for collecting the sample. One of the methods could be accomplished with the dog in its cage. The bleeding techniques were rapid, requiring approximately 1 minute per dog.

Applied mathematical methods in nuclear thermal hydraulics

International Nuclear Information System (INIS)

Ransom, V.H.; Trapp, J.A.

1983-01-01

Applied mathematical methods are used extensively in modeling of nuclear reactor thermal-hydraulic behavior. This application has required significant extension to the state-of-the-art. The problems encountered in modeling of two-phase fluid transients and the development of associated numerical solution methods are reviewed and quantified using results from a numerical study of an analogous linear system of differential equations. In particular, some possible approaches for formulating a well-posed numerical problem for an ill-posed differential model are investigated and discussed. The need for closer attention to numerical fidelity is indicated

An Introduction to the Septal Extension Graft

Directory of Open Access Journals (Sweden)

Myung-Hoon Kim

2014-01-01

Full Text Available The septal extension graft is a very useful method of controlling nasal lengthening and tip projection, rotation, and shape by fixing a graft to the septum, which leads to a strong supporting structure. Enhancing graft stability is important for better long-term outcomes and minimizing complications or relapse, and even more efficient application of these methods is needed for East Asians who lack enough cartilage to be harvested in addition to possessing a weak cartilage framework. In this paper, the methods for overcoming the drawbacks of the septal extension graft, such as instability, a fixed tip, and insufficiency of cartilage, are presented, and the applications of each method for greater satisfaction with surgical outcomes are also discussed.

Lifetime-management and lifetime-extension at PAKS nuclear power plant

International Nuclear Information System (INIS)

Katona, Tamas; Ratkai, Sandor; Janosi, Agnes Biro

2002-01-01

core might be necessary with 50% probability. Annealing is not a cost critical method and it has been successfully applied in the practice of VVER plants (i.e. Finland and Slovakia). The study indicates that the steam generators are very important and critical equipment at VVER/440/213 type units. Stress corrosion cracking of heat-transfer tubes shall be considered also in case of steam generators. Considering the effects of already implemented measures, e.g. main turbine-condenser replacement, copper removing, protecting the secondary side of steam generators, replacement of steam generators can be excluded also in case of 50 years of operation. However, local corrosion effects appearing on the secondary side shall be monitored even in case of high PH water regime, transport of erosion products into the steam generator shall be minimised, for example by means of correct selection of the structural materials during replacement of high pressure preheaters. Business model of the lifetime extension covered incomes, expenses and financing. The costs of plant life management and lifetime extension have been estimated conservatively. The market conditions, including liberalisation of the electrical power market have been taken into account. The business analysis shows that the plant lifetime extension is a reasonable business decision. Based on the results of the feasibility study and the public acceptance of extended operation NPP Paks launched a project to elaborate on the plant lifetime management programme and preparation of the necessary licence renewal. The current ageing-management programme of the Paks NPP shall be reviewed and extended to the required scope of SSC (passive long living items). Programme for maintaining the environmental qualification of equipment has to be elaborated on and implemented. Simultaneous to the preparation of the license renewal new requirements shall be implemented in the field of maintenance, also. The plant lifetime extension might

Extension algorithm for generic low-voltage networks

Science.gov (United States)

Marwitz, S.; Olk, C.

2018-02-01

Distributed energy resources (DERs) are increasingly penetrating the energy system which is driven by climate and sustainability goals. These technologies are mostly connected to low- voltage electrical networks and change the demand and supply situation in these networks. This can cause critical network states. Network topologies vary significantly and depend on several conditions including geography, historical development, network design or number of network connections. In the past, only some of these aspects were taken into account when estimating the network investment needs for Germany on the low-voltage level. Typically, fixed network topologies are examined or a Monte Carlo approach is used to quantify the investment needs at this voltage level. Recent research has revealed that DERs differ substantially between rural, suburban and urban regions. The low-voltage network topologies have different design concepts in these regions, so that different network topologies have to be considered when assessing the need for network extensions and investments due to DERs. An extension algorithm is needed to calculate network extensions and investment needs for the different typologies of generic low-voltage networks. We therefore present a new algorithm, which is capable of calculating the extension for generic low-voltage networks of any given topology based on voltage range deviations and thermal overloads. The algorithm requires information about line and cable lengths, their topology and the network state only. We test the algorithm on a radial, a loop, and a heavily meshed network. Here we show that the algorithm functions for electrical networks with these topologies. We found that the algorithm is able to extend different networks efficiently by placing cables between network nodes. The main value of the algorithm is that it does not require any information about routes for additional cables or positions for additional substations when it comes to estimating

Utilization of Educational Innovations and Technology in Research and Extension Functions of State Universities

Directory of Open Access Journals (Sweden)

Rosalinda M. Comia

2017-11-01

Full Text Available The study focused on the extent of utilization of the educational innovations and technology in research and extension functions of SUs. The descriptive design, triangulation method, and purposive sampling were applied in this study. The findings revealed that majority of the respondents are married adults and master’s degree graduates with education as their area of specialization. They are permanent in status and have considerable years in the University serving as research or extension officer. Research of SUs have common research thrusts in terms of environment and natural resources management but differ in their own respective agenda; similarly the SUs share common extension thrusts and concerns but differ in their programs, activities and projects related to community services. Commonly encountered problems concern inadequate funds and inability to access the available technology. Officers utilized educational innovations on research and extension to a moderate extent but software and hardware were utilized to a great extent; likewise internet-based communication was utilized to a great extent for research but used moderately for extension. This implies that compared to research, most of the extension functions do not require the use of internet-based communication. From the results of the study, it was recommended that review of the existing allocation of funds for technology development may be done to improve the existing hardware, software and communication facilities.

40 CFR 63.344 - Performance test requirements and test methods.

Science.gov (United States)

2010-07-01

... electroplating tanks or chromium anodizing tanks. The sampling time and sample volume for each run of Methods 306... Chromium Anodizing Tanks § 63.344 Performance test requirements and test methods. (a) Performance test... Emissions From Decorative and Hard Chromium Electroplating and Anodizing Operations,” appendix A of this...

New examples of frobenius extensions

CERN Document Server

Kadison, Lars

1999-01-01

This volume is based on the author's lecture courses to algebraists at Munich and at G�teborg. He presents, for the first time in book form, a unified approach from the point of view of Frobenius algebras/extensions to diverse topics, such as Jones' subfactor theory, Hopf algebras and Hopf subalgebras, the Yang-Baxter Equation and 2-dimensional topological quantum field theories. Other Features: Initial steps toward a theory of noncommutative ring extensions. Self-contained sections on Azumaya algebras and strongly separable algebras. Applications and generalizations of Morita theory and Azumaya algebra due to Hirata and Sugano. Understanding the text requires no prior background in Frobenius algebras or Hopf algebras. An index and a thorough list of further references are included. There is an appendix giving a brief historical guide to the literature.

Quantitative and Qualitative Extensions of Event Structures

NARCIS (Netherlands)

Katoen, Joost P.

1996-01-01

An important application of formal methods is the specification, design, and analysis of functional aspects of (distributed) systems. Recently the study of quantitative aspects of such systems based on formal methods has come into focus. Several extensions of formal methods where the occurrence of

HACIA LA EXTENSION DEL MÉTODO GRAY WATCH BASADO EN EL ESTÁNDAR DE CALIDAD ISO/IEC 25010 // TOWARDS THE EXTENSION OF THE GRAY WATCH METHOD BASED ON THE QUALITY STANDARD ISO/IEC 25010

Directory of Open Access Journals (Sweden)

Jorge Luis Pérez-Medina

2012-06-01

Full Text Available Talk about software quality implies the need to rely on parameters that should allow to establish the minimal levels that a product of this type must reach in order to be considered of quality. This paper aims to propose an extension of the method GRAY WATCH, specifically in the technical processes of Analysis and Design connecting the products obtained to the process of Implementation. The orientation of our proposal consists of using the standard of product quality ISO/IEC 25010, which establishes criteria for the specification of quality requirements of software products, their metrics and evaluation, and includes a quality model composed by characteristics and subcharacteristics. The result of this proposal, adds significant value to the extended method, Allowing to system analysts and Computer professionals to specify the precise activities to be performed to obtain quality requirements. To make this work we have supported our efforts in the Domain Engineering process based in Software Quality named InDoCaS as methodology for the definition of activities and products in the processes of Analysis, Design and Implementation of the Application.// RESUMEN: Hablar de calidad de software implica la necesidad de contar con parámetros que permitan establecer los niveles mínimos que un producto de este tipo debe alcanzar para que se considere de calidad. El presente articulo tiene como finalidad proponer una extension del método GRAY WATCH, especificamente en los procesos técnicos de análisis y diseño acoplando los productos obtenidos al proceso de implementación. La orientación de nuestra propuesta consiste en utilizar el estándar de calidad del producto ISO/IEC 25010, que establece criterios para la especificacion de requisitos de calidad de productos de software, sus métricas y su evaluación, e incluye un modelo de calidad compuesto por características y subcaracteristicas. El resultado de esta propuesta, agrega un valor importante al

The Impact Of Information And Communication In Extension ...

African Journals Online (AJOL)

The article examines the impact of information and communication in extension services to rural farmers in Niger- Delta. Questionnaire, interview and personal observation methods were employed to elicit information on the impact information and communication in extension services to rural farmers. The study reveals the ...

Turning an Extension Aide into an Extension Agent

Science.gov (United States)

Seevers, Brenda; Dormody, Thomas J.

2010-01-01

For any organization to remain sustainable, a renewable source of faculty and staff needs to be available. The Extension Internship Program for Juniors and Seniors in High School is a new tool for recruiting and developing new Extension agents. Students get "hands on" experience working in an Extension office and earn college credit…

Mediating Informal Care Online: Findings from an Extensive Requirements Analysis

Directory of Open Access Journals (Sweden)

Christiane Moser

2015-05-01

Full Text Available Organizing and satisfying the increasing demand for social and informal care for older adults is an important topic. We aim at building a peer-to-peer exchange platform that empowers older adults to benefit from receiving support for daily activities and reciprocally offering support to others. In situated interviews and within a survey we investigated the requirements and needs of 246 older adults with mild impairments. Additionally, we conducted an interpretative role analysis of older adults’ collaborative care processes (i.e., support exchange practices in order to identify social roles and understand the inherent expectations towards the execution of support. We will describe our target group in the form of personas and different social roles, as well as user requirements for establishing a successful peer-to-peer collaboration. We also consider our finding from the perspective of social capital theory that allows us to describe in our requirements how relationships provide valuable social resources (i.e., social capital for informal and social care.

Development of estimation system of knee extension strength using image features in ultrasound images of rectus femoris

Science.gov (United States)

Murakami, Hiroki; Watanabe, Tsuneo; Fukuoka, Daisuke; Terabayashi, Nobuo; Hara, Takeshi; Muramatsu, Chisako; Fujita, Hiroshi

2016-04-01

The word "Locomotive syndrome" has been proposed to describe the state of requiring care by musculoskeletal disorders and its high-risk condition. Reduction of the knee extension strength is cited as one of the risk factors, and the accurate measurement of the strength is needed for the evaluation. The measurement of knee extension strength using a dynamometer is one of the most direct and quantitative methods. This study aims to develop a system for measuring the knee extension strength using the ultrasound images of the rectus femoris muscles obtained with non-invasive ultrasonic diagnostic equipment. First, we extract the muscle area from the ultrasound images and determine the image features, such as the thickness of the muscle. We combine these features and physical features, such as the patient's height, and build a regression model of the knee extension strength from training data. We have developed a system for estimating the knee extension strength by applying the regression model to the features obtained from test data. Using the test data of 168 cases, correlation coefficient value between the measured values and estimated values was 0.82. This result suggests that this system can estimate knee extension strength with high accuracy.

Effective Teaching Methods in Higher Education: Requirements and Barriers.

Science.gov (United States)

Shirani Bidabadi, Nahid; Nasr Isfahani, Ahmmadreza; Rouhollahi, Amir; Khalili, Roya

2016-10-01

Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors). Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered) plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors' behavior and some of these are prerequisite in professors' outlook. Also, there are some major barriers, some of which are associated with the professors' operation and others are related to laws and regulations. Implications of these findings for teachers' preparation in education are discussed. In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities should be awarded of these barriers and requirements as a way to

Designing and application of SAN extension interface based on CWDM

Science.gov (United States)

Qin, Leihua; Yu, Shengsheng; Zhou, Jingli

2005-11-01

As Fibre Channel (FC) becomes the protocol of choice within corporate data centers, enterprises are increasingly deploying SANs in their data central. In order to mitigate the risk of losing data and improve the availability of data, more and more enterprises are increasingly adopting storage extension technologies to replicate their business critical data to a secondary site. Transmitting this information over distance requires a carrier grade environment with zero data loss, scalable throughput, low jitter, high security and ability to travel long distance. To address this business requirements, there are three basic architectures for storage extension, they are Storage over Internet Protocol, Storage over Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) and Storage over Dense Wavelength Division Multiplexing (DWDM). Each approach varies in functionality, complexity, cost, scalability, security, availability , predictable behavior (bandwidth, jitter, latency) and multiple carrier limitations. Compared with these connectiviy technologies,Coarse Wavelength Division Multiplexing (CWDM) is a Simplified, Low Cost and High Performance connectivity solutions for enterprises to deploy their storage extension. In this paper, we design a storage extension connectivity over CWDM and test it's electrical characteristic and random read and write performance of disk array through the CWDM connectivity, testing result show us that the performance of the connectivity over CWDM is acceptable. Furthermore, we propose three kinds of network architecture of SAN extension based on CWDM interface. Finally the credit-Based flow control mechanism of FC, and the relationship between credits and extension distance is analyzed.

A comparison of four streamflow record extension techniques

Science.gov (United States)

Hirsch, Robert M.

1982-01-01

One approach to developing time series of streamflow, which may be used for simulation and optimization studies of water resources development activities, is to extend an existing gage record in time by exploiting the interstation correlation between the station of interest and some nearby (long-term) base station. Four methods of extension are described, and their properties are explored. The methods are regression (REG), regression plus noise (RPN), and two new methods, maintenance of variance extension types 1 and 2 (MOVE.l, MOVE.2). MOVE.l is equivalent to a method which is widely used in psychology, biometrics, and geomorphology and which has been called by various names, e.g., ‘line of organic correlation,’ ‘reduced major axis,’ ‘unique solution,’ and ‘equivalence line.’ The methods are examined for bias and standard error of estimate of moments and order statistics, and an empirical examination is made of the preservation of historic low-flow characteristics using 50-year-long monthly records from seven streams. The REG and RPN methods are shown to have serious deficiencies as record extension techniques. MOVE.2 is shown to be marginally better than MOVE.l, according to the various comparisons of bias and accuracy.

Extensions and renovations of reactor protection systems

International Nuclear Information System (INIS)

Hellmerichs, K.

1985-01-01

Increase of requirements by the authorities as to the design of reactor protection systems affected in the last years not only plans being under construction, but also resulted in partly spacious extensions and renovations. While working on the extensions and renovations a lot of problems arose: far-reaching performance of newest guidelines and rules in spite of old plant concepts; partly higher degree of redundancy requirements of the new systems in contrast to the present systems; use of present safeguard systems for new accident countermeasures; designation of priorities between present and new functions, especially in view of fault behaviour of present systems; adaptation of the new I and C equipment to the present signalisation-, operation- and information-arrangements under consideration of the present operational philosophy; spatial incorporation of new equipments; construction as to time without expanding of the planned refuelling phases. Because the KWU has planned and constructed such alterations in nearly 10 plants a lot of experience has been gathered. (author)

Life extension of containment structures of Indian PHWRs

International Nuclear Information System (INIS)

Roy, Raghupati; Garg, R.P.; Verma, U.S.P.

2006-01-01

Containment structures prevent radioactivity release in the event of any postulated Design Basis Accident (DBA) so that the level of radiation in the external environment is within acceptable limits. Containment structures of Indian PHWRs are typically unlined prestressed concrete structures, which are required to maintain its leak tightness characteristics and strength under DBA during the life of the structure. As nuclear power plant structures age, a number of degradation mechanisms begin to affect critical containment structure. Depending on the type and severity of these degradation mechanisms, its adverse effect on the leak tightness and pressure carrying capacity can be significant. Since the containment structures of Indian PHWRs are unlined, the leak tightness characteristics are solely dependent on the concrete properties and the prestressing material. Prestressing, which is introduced to control the deformation and strength requirement, is affected due to aging. Hence, adequacy of prestressing during the life of the structure to withstand internal pressure and the related leak tightness must be ensured for life extension of prestressed concrete containment structure in view of their significant long term losses. Prevention of corrosion in prestressing steel and assessment of the same at the end of extended design life of the structure, require utmost attention in view of their catastrophic nature of failure. This paper describes the various degradation mechanisms pertaining to concrete and their effect on the leak tightness characteristics and the strength requirement. The issues related to prestressing are also discussed in detail in this paper. The requirement of periodic monitoring of the containment structure for assessing its deformation and leak tightness characteristics and development of database for life extension of containment structure is also addressed in this paper. This paper also discusses the various provisions and measures, which are

Analysis of integrated plant upgrading/life extension programs

International Nuclear Information System (INIS)

McCutchan, D.A.; Massie, H.W. Jr.; McFetridge, R.H.

1988-01-01

A present-worth generating cost model has been developed and used to evaluate the economic value of integrated plant upgrading life extension project in nuclear power plants. This paper shows that integrated plant upgrading programs can be developed in which a mix of near-term availability, power rating, and heat rate improvements can be obtained in combination with life extension. All significant benefits and costs are evaluated from the viewpoint of the utility, as measured in discounted revenue requirement differentials between alternative plans which are equivalent in system generating capacity. The near-term upgrading benefits are shown to enhance the benefit picture substantially. In some cases the net benefit is positive, even if the actual life extension proves to be less than expected

Challenges and agricultural extension needs of urban and peri ...

African Journals Online (AJOL)

... management (M=2.00), among others. Extension agents should regularly disseminate information on livestock production to urban and peri-urban livestock keepers via training, demonstration sessions or other extension teaching methods. Keywords: Animals, Constraints, dissemination, Farmers, Information, Production ...

Identifying and prioritizing customer requirements from tractor production by QFD method

Directory of Open Access Journals (Sweden)

H Taghizadeh

2017-05-01

Full Text Available Introduction Discovering and understanding customer needs and expectations are considered as important factors on customer satisfaction and play vital role to maintain the current activity among its competitors, proceeding and obtaining customer satisfaction which are critical factors to design a successful production; thus the successful organizations must meet their needs containing the quality of the products or services to customers. Quality Function Deployment (QFD is a technique for studying demands and needs of customers which is going to give more emphasis to the customer's interests in this way. The QFD method in general implemented various tools and methods for reaching qualitative goals; but the most important and the main tool of this method is the house of quality diagrams. The Analytic Hierarchy Process (AHP is a famous and common MADM method based on pair wise comparisons used for determining the priority of understudied factors in various studies until now. With considering effectiveness of QFD method to explicating customer's demands and obtaining customer satisfaction, generally, the researchers followed this question's suite and scientific answer: how can QFD explicate real demands and requirements of customers from tractor final production and what is the prioritization of these demands and requirements in view of customers. Accordingly, the aim of this study was to identify and prioritize the customer requirements of Massey Ferguson (MF 285 tractor production in Iran tractor manufacturing company with t- student statistical test, AHP and QFD methods. Materials and Methods Research method was descriptive and statistical population included all of the tractor customers of Tractor Manufacturing Company in Iran from March 2011 to March 2015. The statistical sample size was 171 which are determined with Cochran index. Moreover, 20 experts' opinion has been considered for determining product's technical requirements. Literature

76 FR 33372 - Proposed Extension of the Approval of Information Collection Requirements; Comment Request

Science.gov (United States)

2011-06-08

... Rehabilitation Act of 1973, as amended, 29 U.S.C. 793 (referred to as Section 503); and The Vietnam Era Veterans... of Section 4212 prohibit employment discrimination against special disabled veterans, Vietnam era... provisions of the three legal authorities it administers. Type of Review: Extension. Agency: Office of...

Analysis of the extension and reduction method of qualified life used in equipment with ambiental qualification; Analisis del metodo de extension y reduccion de vida calificada utilizado en equipo con calificacion ambiental

Energy Technology Data Exchange (ETDEWEB)

Serrano R, M.L. [CNSNS, 03020 Mexico D.F. (Mexico)].e -mail: mlserrano@cnsns.gob.mx

2005-07-01

With the purpose of reducing costs of acquisition, maintenance, design, hour-man, dose, production, etc. or by changes in the temperature of service, diverse Nuclear Plants (NP) in the world have been carried out extensions and reductions of life of equipment and/or components related with the safety. The used methods are mainly tests type on equipment or component aged quickly, tests type on equipment or component aged naturally and use of the Arrhenius model with monitoring of temperatures in place. The present article carries out an analysis of the Arrhenius model with monitoring of temperatures in place, which is presented in two variants, equation (1) and (2), since it is the but used by the NP with extension purposes and reduction of qualified life. As back information, it was made one search of investigations, applied to diverse fields of the science that try about the reliability of the results provided by Arrhenius for the aging case. The results of the analysis indicate: I) that this method make uncertainties in some intervals of temperature and 2) which of the two variants it provides data more reliable. (Author)

Improving Generation Y Volunteerism in Extension Programs

Science.gov (United States)

Andrews, Kevin B.; Lockett, Landry L.

2013-01-01

Members of Generation Y have many positive attributes that make them attractive to Extension volunteer administrators as a potential source of labor. However, they think differently, have unique needs, require new management styles, and have less tolerance for unpleasant working conditions than previous generations. Additionally, they are engaged…

A facility for creating Python extensions in C++

International Nuclear Information System (INIS)

Dubois, P F

1998-01-01

Python extensions are usually created by writing the glue that connects Python to the desired new functionality in the C language. While simple extensions do not require much effort, to do the job correctly with full error checking is tedious and prone to errors in reference counting and to memory leaks, especially when errors occur. The resulting program is difficult to read and maintain. By designing suitable C++ classes to wrap the Python C API, we are able to produce extensions that are correct and which clean up after themselves correctly when errors occur. This facility also integrates the C++ and Python exception facilities. This paper briefly describes our package for this purpose, named CXX. The emphasis is on our design choices and the way these contribute to the construction of accurate Python extensions. We also briefly relate the way CXX's facilities for sequence classes allow use of C++'s Standard Template Library (STL) algorithms on C++ sequences

Transforming the Roles of a Public Extension Agency to Strengthen Innovation: Lessons from the National Agricultural Extension Project in Bangladesh

Science.gov (United States)

Chowdhury, Ataharul Huq; Odame, Helen Hambly; Leeuwis, Cees

2014-01-01

Purpose: The rapidly evolving nature of agricultural innovation processes in low-income countries requires agricultural extension agencies to transform the classical roles that previously supported linear information dissemination and adoption of innovation. In Bangladesh, strengthening agricultural innovation calls for facilitation of interactive…

Numerical methods

CERN Document Server

Dahlquist, Germund

1974-01-01

""Substantial, detailed and rigorous . . . readers for whom the book is intended are admirably served."" - MathSciNet (Mathematical Reviews on the Web), American Mathematical Society.Practical text strikes fine balance between students' requirements for theoretical treatment and needs of practitioners, with best methods for large- and small-scale computing. Prerequisites are minimal (calculus, linear algebra, and preferably some acquaintance with computer programming). Text includes many worked examples, problems, and an extensive bibliography.

Brand Extensions: A Qualitative Meta-Analysis Of 20 Years Of Marketing Research

OpenAIRE

Elise Prosser; Melissa St. James

2011-01-01

Brand extensions, or new product introductions under an existing brand name, have become increasingly popular over the past 20 years. Marketers tout brand extensions as enjoying higher market share and profitability than launching new brand names that require exorbitant advertising expenditures (Smith & Park 1992). According to some estimates, brand extensions account for more than 90% of new product introductions in some categories (Volckner & Sattler 2002). However, one study found that 27%...

47 CFR 22.912 - Service area boundary extensions.

Science.gov (United States)

2010-10-01

... cellular market or in the Gulf of Mexico Coastal Zone (GMCZ), to allow one or more SAB extensions into the... of the cellular market boundary, but within the service area as calculated using the methods of § 22... section, SABs may be extended into adjacent cellular markets if such extensions are de minimis, are...

Surveillance extension experience at WWER-440 type reactors

International Nuclear Information System (INIS)

Gillemot, F.; Uri, G.; Oszwald, F.; Trampus, P.

1993-01-01

In WWER-440 reactors, the surveillance specimens are located in accelerated irradiation positions. After 5 years, all specimens are withdrawn and the operational changes are not monitored. At Paks NPP a new surveillance program extension has been settled in order to avoid these original program disadvantages and generate further data for plant lifetime management. This paper includes: research performed to prepare the surveillance extension programme, the evaluation method for the surveillance extension, and first results (Charpy and tensile tests). (authors). 6 refs., 12 figs., 3 tabs

Surveillance extension experience at WWER-440 type reactors

Energy Technology Data Exchange (ETDEWEB)

Gillemot, F; Uri, G [Budapesti Mueszaki Egyetem, Budapest (Hungary); Oszwald, F; Trampus, P

1994-12-31

In WWER-440 reactors, the surveillance specimens are located in accelerated irradiation positions. After 5 years, all specimens are withdrawn and the operational changes are not monitored. At Paks NPP a new surveillance program extension has been settled in order to avoid these original program disadvantages and generate further data for plant lifetime management. This paper includes: research performed to prepare the surveillance extension programme, the evaluation method for the surveillance extension, and first results (Charpy and tensile tests). (authors). 6 refs., 12 figs., 3 tabs.

New activities of universities in transfer and extension: multiple requirements and manifold solutions

OpenAIRE

Bo Göransson; Rasigan Maharajh; Ulrich Schmoch

2009-01-01

The third mission encompasses all activities of universities beyond their first and second missions, education and research. An analysis of various countries with different economic, political and geographic features reveals an increased demand for such activities in particular with regard to technology transfer, but also as to the support of the civil society in more general terms. Therefore the universities have to find a new balance between education, research and transfer/extension. Howev...

Absolutely minimal extensions of functions on metric spaces

International Nuclear Information System (INIS)

Milman, V A

1999-01-01

Extensions of a real-valued function from the boundary ∂X 0 of an open subset X 0 of a metric space (X,d) to X 0 are discussed. For the broad class of initial data coming under discussion (linearly bounded functions) locally Lipschitz extensions to X 0 that preserve localized moduli of continuity are constructed. In the set of these extensions an absolutely minimal extension is selected, which was considered before by Aronsson for Lipschitz initial functions in the case X 0 subset of R n . An absolutely minimal extension can be regarded as an ∞-harmonic function, that is, a limit of p-harmonic functions as p→+∞. The proof of the existence of absolutely minimal extensions in a metric space with intrinsic metric is carried out by the Perron method. To this end, ∞-subharmonic, ∞-superharmonic, and ∞-harmonic functions on a metric space are defined and their properties are established

Quality assurance requirements and methods for high level waste package acceptability

International Nuclear Information System (INIS)

1992-12-01

This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

Tramp Ship Routing and Scheduling - Models, Methods and Opportunities

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

of their demand in advance. However, the detailed requirements of these contract cargoes can be subject to ongoing changes, e.g. the destination port can be altered. For tramp operators, a main concern is therefore the efficient and continuous planning of routes and schedules for the individual ships. Due...... and scheduling problem, focus should now be on extending this basic problem to include additional real-world complexities and develop suitable solution methods for those extensions. Such extensions will enable more tramp operators to benefit from the solution methods while simultaneously creating new...

Development and testing of the methodology for performance requirements

International Nuclear Information System (INIS)

Rivers, J.D.

1989-01-01

The U.S. Department of Energy (DOE) is in the process of implementing a set of materials control and accountability (MC ampersand A) performance requirements. These graded requirements set a uniform level of performance for similar materials at various facilities against the threat of an insider adversary stealing special nuclear material (SNM). These requirements are phrased in terms of detecting the theft of a goal quantity of SNM within a specified time period and with a probability greater than or equal to a special value and include defense-in-depth requirements. The DOE has conducted an extensive effort over the last 2 1/2 yr to develop a practical methodology to be used in evaluating facility performance against the performance requirements specified in DOE order 5633.3. The major participants in the development process have been the Office of Safeguards and Security (OSS), Brookhaven National Laboratory, and Los Alamos National Laboratory. The process has included careful reviews of related evaluation systems, a review of the intent of the requirements in the order, and site visits to most of the major facilities in the DOE complex. As a result of this extensive effort to develop guidance for the MC ampersand A performance requirements, OSS was able to provide a practical method that will allow facilities to evaluate the performance of their safeguards systems against the performance requirements. In addition, the evaluations can be validated by the cognizant operations offices in a systematic manner

5 CFR 470.315 - Project modification and extension.

Science.gov (United States)

2010-01-01

... provisions of approved project plans will not be modified, duplicated in organizations not listed in the... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Project modification and extension. 470... PERSONNEL MANAGEMENT RESEARCH PROGRAMS AND DEMONSTRATIONS PROJECTS Regulatory Requirements Pertaining to...

Coherent search of continuous gravitational wave signals: extension of the 5-vectors method to a network of detectors

International Nuclear Information System (INIS)

Astone, P; Colla, A; Frasca, S; Palomba, C; D'Antonio, S

2012-01-01

We describe the extension to multiple datasets of a coherent method for the search of continuous gravitational wave signals, based on the computation of 5-vectors. In particular, we show how to coherently combine different datasets belonging to the same detector or to different detectors. In the latter case the coherent combination is the way to have the maximum increase in signal-to-noise ratio. If the datasets belong to the same detector the advantage comes mainly from the properties of a quantity called coherence which is helpful (in both cases, in fact) in rejecting false candidates. The method has been tested searching for simulated signals injected in Gaussian noise and the results of the simulations are discussed.

Information Needs and Source Information of Agricultural Extension Workers in DIY

Directory of Open Access Journals (Sweden)

Retno Wulandari

2016-02-01

Full Text Available One of the important factors that contribute to agricultural development is information. As such agricultural extension workers that link agricultural agencies to the farmers must have adequate and up-to-date information about agricultural practices before they could inform, educate and train the farmers in method and techniques of farming. This study aims to determine the types of information needed by agricultural extension workers; to determine the sources of information used by the agricultural extension workers; and to determine the comparison between types of information with information sources used by agricultural extension workers. The present study was a descriptive study using a survey design and conducted at Daerah Istimewa Yogyakarta (DIY Province. The populations of the study consists 181 agricultural extension workers divisible in the district level, namely Sleman, Kulon Progo, Gunung Kidul dan Bantul. Sampling procedure in this study used cluster sampling. The method for gathering data from the respondents is based on a structured questionnaire. Descriptive statistics was to describe the characteristics of the respondents and the dependent variables of the study. As a result, most of agricultural extension workers strongly needed the innovation information in seeking information followed by extension service information and extension role information. The result of information sources used by agricultural extension worker for extension service information, innovation information and extension role information indicates that agricultural extension workers used interpersonal source. Most of them never sought information use Internet, they use radio more frequently than television and video, agricultural extension worker also used mass media as information source.

Shaft extension design at the Underground Research Laboratory, Pinawa, Manitoba

International Nuclear Information System (INIS)

Kuzyk, G.W.; Ball, A.E.

1991-01-01

AECL Research has constructed an underground laboratory for the research and development required for the Canadian Nuclear Fuel Waste Management Program. The experimental program in the laboratory will contribute to the assessment of the feasibility and safety of nuclear fuel waste disposal deep in stable plutonic rock. In 1988, AECL extended the shaft of the Underground Research Laboratory (URL) from the existing 255 m depth to a depth of 443 m in cooperation with the United States Department of Energy. The project, which involved carrying out research activities while excavation and construction work was in progress, required careful planning. To accommodate the research programs, full-face blasting with a burn cut was used to advance the shaft. Existing facilities at the URL had to be modified to accommodate an expanded underground facility at a new depth. This paper discusses the design criteria, shaft-sinking methods and approaches used to accommodate the research work during this shaft extension project. (11 refs., 11 figs.)

Stress intensity evaluation for surface crack with use of boundary element method and influence function method and the surface crack extension analysis

International Nuclear Information System (INIS)

Yuuki, R.; Ejima, K.

1991-01-01

In this study, three-dimensional boundary element elastostatic analysis is carried out on various surface crack problems. The present BEM uses a Mindlin's solution as well as a Kelvin's solution as a fundamental solution. So we can obtain accurate solutions for a surface crack just before or after a penetration. The obtained solutions for various shapes of surface cracks are stored as the data base, based on the influence function method. We develop the surface crack extension analysis system using the stress intensity factor data base and also the fatigue crack growth law. Our system seems to be useful especially for the analysis of the surface crack just before or after the penetration and also under the residual stresses

Applications of Extensive Green-roof Systems in Contributing to Sustainable Development in Densely Populated Cities: a Hong Kong Study

Directory of Open Access Journals (Sweden)

Xiaoling Zhang

2011-03-01

Full Text Available Developed cities such as Hong Kong are usually densely populated. Since the land is limited, high-rise buildings are constructed. When the building height becomes higher, air flow is reduced and heat is trapped among high-rise buildings. Air temperature will be greatly increased and air pollution becomes a serious problem. This creates a walled building problem. To reduce air temperature caused by the wall-effects, various methods have been developed in the previous studies. One typical method is the use of green roof systems. The application of extensive green roofs on the existing building rooftops has been recommended in Hong Kong since 2001. The advantage of this practice is that no additional floor area is required and it can also improve urban greenery. Although a green roof system has been introduced and adopted in Hong Kong since 2001, the emphasis is mainly given to the application of intensive green roofs for podium garden instead of extensive green roofs. It is considered valuable and necessary of the extensive green roofs for the buildings. This paper investigates the current practice of using extensive green roofs in Hong Kong. The constraints in applying extensive green roofs are investigated, which leads to studying the solutions for mitigating these constraints and improving the future development of the implementation.

Dense Output for Strong Stability Preserving Runge–Kutta Methods

KAUST Repository

Ketcheson, David I.; Loczi, Lajos; Jangabylova, Aliya; Kusmanov, Adil

2016-01-01

We investigate dense output formulae (also known as continuous extensions) for strong stability preserving (SSP) Runge–Kutta methods. We require that the dense output formula also possess the SSP property, ideally under the same step

Segment-Specific Adhesion as a Driver of Convergent Extension

Science.gov (United States)

Vroomans, Renske M. A.; Hogeweg, Paulien; ten Tusscher, Kirsten H. W. J.

2015-01-01

Convergent extension, the simultaneous extension and narrowing of tissues, is a crucial event in the formation of the main body axis during embryonic development. It involves processes on multiple scales: the sub-cellular, cellular and tissue level, which interact via explicit or intrinsic feedback mechanisms. Computational modelling studies play an important role in unravelling the multiscale feedbacks underlying convergent extension. Convergent extension usually operates in tissue which has been patterned or is currently being patterned into distinct domains of gene expression. How such tissue patterns are maintained during the large scale tissue movements of convergent extension has thus far not been investigated. Intriguingly, experimental data indicate that in certain cases these tissue patterns may drive convergent extension rather than requiring safeguarding against convergent extension. Here we use a 2D Cellular Potts Model (CPM) of a tissue prepatterned into segments, to show that convergent extension tends to disrupt this pre-existing segmental pattern. However, when cells preferentially adhere to cells of the same segment type, segment integrity is maintained without any reduction in tissue extension. Strikingly, we demonstrate that this segment-specific adhesion is by itself sufficient to drive convergent extension. Convergent extension is enhanced when we endow our in silico cells with persistence of motion, which in vivo would naturally follow from cytoskeletal dynamics. Finally, we extend our model to confirm the generality of our results. We demonstrate a similar effect of differential adhesion on convergent extension in tissues that can only extend in a single direction (as often occurs due to the inertia of the head region of the embryo), and in tissues prepatterned into a sequence of domains resulting in two opposing adhesive gradients, rather than alternating segments. PMID:25706823

Neural Interfaces for Intracortical Recording: Requirements, Fabrication Methods, and Characteristics.

Science.gov (United States)

Szostak, Katarzyna M; Grand, Laszlo; Constandinou, Timothy G

2017-01-01

Implantable neural interfaces for central nervous system research have been designed with wire, polymer, or micromachining technologies over the past 70 years. Research on biocompatible materials, ideal probe shapes, and insertion methods has resulted in building more and more capable neural interfaces. Although the trend is promising, the long-term reliability of such devices has not yet met the required criteria for chronic human application. The performance of neural interfaces in chronic settings often degrades due to foreign body response to the implant that is initiated by the surgical procedure, and related to the probe structure, and material properties used in fabricating the neural interface. In this review, we identify the key requirements for neural interfaces for intracortical recording, describe the three different types of probes-microwire, micromachined, and polymer-based probes; their materials, fabrication methods, and discuss their characteristics and related challenges.

Estimation methods of eco-environmental water requirements: Case study

Institute of Scientific and Technical Information of China (English)

YANG Zhifeng; CUI Baoshan; LIU Jingling

2005-01-01

Supplying water to the ecological environment with certain quantity and quality is significant for the protection of diversity and the realization of sustainable development. The conception and connotation of eco-environmental water requirements, including the definition of the conception, the composition and characteristics of eco-environmental water requirements, are evaluated in this paper. The classification and estimation methods of eco-environmental water requirements are then proposed. On the basis of the study on the Huang-Huai-Hai Area, the present water use, the minimum and suitable water requirement are estimated and the corresponding water shortage is also calculated. According to the interrelated programs, the eco-environmental water requirements in the coming years (2010, 2030, 2050) are estimated. The result indicates that the minimum and suitable eco-environmental water requirements fluctuate with the differences of function setting and the referential standard of water resources, and so as the water shortage. Moreover, the study indicates that the minimum eco-environmental water requirement of the study area ranges from 2.84×1010m3 to 1.02×1011m3, the suitable water requirement ranges from 6.45×1010m3 to 1.78×1011m3, the water shortage ranges from 9.1×109m3 to 2.16×1010m3 under the minimum water requirement, and it is from 3.07×1010m3 to 7.53×1010m3 under the suitable water requirement. According to the different values of the water shortage, the water priority can be allocated. The ranges of the eco-environmental water requirements in the three coming years (2010, 2030, 2050) are 4.49×1010m3-1.73×1011m3, 5.99×10m3?2.09×1011m3, and 7.44×1010m3-2.52×1011m3, respectively.

Analyze the Air Force Methods for Facility Sustainment and Restoration

National Research Council Canada - National Science Library

Cole, Ronald

2003-01-01

...) and try to capitalize on industry standard practices to improve the AF methods. Industry has conducted extensive research devoted to the development of predictive models to estimate facility maintenance or sustainment requirements...

The ASME Section 11 Special Working Group On Plant Life Extension

International Nuclear Information System (INIS)

Katz, L.R.

1990-01-01

The codes and standards applicable to plant life extension have not been identified in the U.S. at this time. However, several initiatives have been taken to establish specific codes and standards pertaining to nuclear plant life extension (PLEX). One of these initiatives, sponsored by ASME, is the Section XI Special Working Group on Plant Life Extension (SWG-PLEX). The SWG-PLEX reports to the ASME Section XI Subcommittee and is responsible for recommending or drafting rules and requirements for modifying Section XI to accommodate age-related degradation to support nuclear plant life extension. This paper summarizes the results and reports the activities of the SWG-PLEX during the 1989/1990 period

Mimetic finite difference method for the stokes problem on polygonal meshes

Energy Technology Data Exchange (ETDEWEB)

Lipnikov, K [Los Alamos National Laboratory; Beirao Da Veiga, L [DIPARTIMENTO DI MATE; Gyrya, V [PENNSYLVANIA STATE UNIV; Manzini, G [ISTIUTO DI MATEMATICA

2009-01-01

Various approaches to extend the finite element methods to non-traditional elements (pyramids, polyhedra, etc.) have been developed over the last decade. Building of basis functions for such elements is a challenging task and may require extensive geometry analysis. The mimetic finite difference (MFD) method has many similarities with low-order finite element methods. Both methods try to preserve fundamental properties of physical and mathematical models. The essential difference is that the MFD method uses only the surface representation of discrete unknowns to build stiffness and mass matrices. Since no extension inside the mesh element is required, practical implementation of the MFD method is simple for polygonal meshes that may include degenerate and non-convex elements. In this article, we develop a MFD method for the Stokes problem on arbitrary polygonal meshes. The method is constructed for tensor coefficients, which will allow to apply it to the linear elasticity problem. The numerical experiments show the second-order convergence for the velocity variable and the first-order for the pressure.

Design extension conditions

Energy Technology Data Exchange (ETDEWEB)

Bujor, A.; Harwood, C.; Lei, Q.; Viktorov, A., E-mail: christopher.harwood@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada)

2013-07-01

The CNSC has introduced the term Design Extension Conditions (DEC) in regulatory document RD-337 version 2, 'Design of New Nuclear Power Plants' which was issued for public consultation in July 2012. The primary drivers for this change compared with the earlier version of RD-337 are to maintain alignment with the equivalent International Atomic Energy Agency (IAEA) safety standard and to introduce changes resulting from lessons learned from the Fukushima Daiichi accident. RD-337 version 2 and the accompanying guidance document GD-337 establish high level design requirements and expectations for new Nuclear Power Plants (NPPs), including those pertaining to DEC. Other regulatory documents provide requirements for safety analysis and accident management as well as other aspect relevant to DEC. Nevertheless, the currently available guidance specific to DEC is not comprehensive, while the practices just begin to emerge. CNSC and industry stakeholders are actively discussing how the high level requirements and expectations will be applied in various fields. This paper is a summary of a CNSC discussion paper that is being developed to encourage substantive stakeholder discussions. The topic of DEC is being advanced rapidly both nationally and internationally. With this in mind, this paper does not intend to provide a final established position, but rather to stimulate discussion on the subject of DEC. This paper provides the definition of DEC, gives background information relating to the adoption of the term, describes the identification of DECs and the underlying principles associated with design, analysis, operational and procedural requirements. As described in this paper, DEC and associated requirements apply to new NPPs. Applicability to existing NPPs is also discussed. (author)

Improvement of the symbolic Monte-Carlo method for the transport equation: P1 extension and coupling with diffusion

International Nuclear Information System (INIS)

Clouet, J.F.; Samba, G.

2005-01-01

We use asymptotic analysis to study the diffusion limit of the Symbolic Implicit Monte-Carlo (SIMC) method for the transport equation. For standard SIMC with piecewise constant basis functions, we demonstrate mathematically that the solution converges to the solution of a wrong diffusion equation. Nevertheless a simple extension to piecewise linear basis functions enables to obtain the correct solution. This improvement allows the calculation in opaque medium on a mesh resolving the diffusion scale much larger than the transport scale. Anyway, the huge number of particles which is necessary to get a correct answer makes this computation time consuming. Thus, we have derived from this asymptotic study an hybrid method coupling deterministic calculation in the opaque medium and Monte-Carlo calculation in the transparent medium. This method gives exactly the same results as the previous one but at a much lower price. We present numerical examples which illustrate the analysis. (authors)

Neural Interfaces for Intracortical Recording: Requirements, Fabrication Methods, and Characteristics

Directory of Open Access Journals (Sweden)

Katarzyna M. Szostak

2017-12-01

Full Text Available Implantable neural interfaces for central nervous system research have been designed with wire, polymer, or micromachining technologies over the past 70 years. Research on biocompatible materials, ideal probe shapes, and insertion methods has resulted in building more and more capable neural interfaces. Although the trend is promising, the long-term reliability of such devices has not yet met the required criteria for chronic human application. The performance of neural interfaces in chronic settings often degrades due to foreign body response to the implant that is initiated by the surgical procedure, and related to the probe structure, and material properties used in fabricating the neural interface. In this review, we identify the key requirements for neural interfaces for intracortical recording, describe the three different types of probes—microwire, micromachined, and polymer-based probes; their materials, fabrication methods, and discuss their characteristics and related challenges.

Extension of a theory of Feynman

International Nuclear Information System (INIS)

Blaquiere, Augustin

1979-01-01

We propose a relativistic extension of a method through which Feynman derives the Schroedinger equation. The equation of Klein-Gordon for a charged particle in a magnetic field is obtained. Some connections with the nonrelativistic and the classical approximations are discussed [fr

78 FR 15743 - Proposed Extension of Existing Collection; Comment Request

Science.gov (United States)

2013-03-12

..., or Email). SUPPLEMENTARY INFORMATION: I. Background Section 423 of the Black Lung Benefits Act, as... black lung benefits as required by the Act. Type of Review: Extension. Agency: Office of Workers...

International database on ageing management and life extension

International Nuclear Information System (INIS)

Ianko, L.; Lyssakov, V.; McLachlan, D.; Russell, J.; Mukhametshin, V.

1995-01-01

International database on ageing management and life extension for reactor pressure vessel materials (RPVM) is described with the emphasis on the following issues: requirements of the system; design concepts for RPVM database system; data collection, processing and storage; information retrieval and dissemination; RPVM information assessment and evaluation. 1 fig

Sociologists in Extension

Science.gov (United States)

Christenson, James A.; And Others

1977-01-01

The article describes the work activities of the extension sociologist, the relative advantage and disadvantage of extension roles in relation to teaching/research roles, and the relevance of sociological training and research for extension work. (NQ)

Ethical objections against including life-extension costs in cost-effectiveness analysis: a consistent approach.

Science.gov (United States)

Gandjour, Afschin; Müller, Dirk

2014-10-01

One of the major ethical concerns regarding cost-effectiveness analysis in health care has been the inclusion of life-extension costs ("it is cheaper to let people die"). For this reason, many analysts have opted to rule out life-extension costs from the analysis. However, surprisingly little has been written in the health economics literature regarding this ethical concern and the resulting practice. The purpose of this work was to present a framework and potential solution for ethical objections against life-extension costs. This work found three levels of ethical concern: (i) with respect to all life-extension costs (disease-related and -unrelated); (ii) with respect to disease-unrelated costs only; and (iii) regarding disease-unrelated costs plus disease-related costs not influenced by the intervention. Excluding all life-extension costs for ethical reasons would require-for reasons of consistency-a simultaneous exclusion of savings from reducing morbidity. At the other extreme, excluding only disease-unrelated life-extension costs for ethical reasons would require-again for reasons of consistency-the exclusion of health gains due to treatment of unrelated diseases. Therefore, addressing ethical concerns regarding the inclusion of life-extension costs necessitates fundamental changes in the calculation of cost effectiveness.

A Nested-Splicing by Overlap Extension PCR Improves Specificity of this Standard Method.

Science.gov (United States)

Karkhane, Ali Asghar; Yakhchali, Bagher; Rastgar Jazii, Ferdous; Bambai, Bijan; Aminzadeh, Saeed; Rahimi, Fatemeh

2015-06-01

Splicing by overlap extension (SOE) PCR is used to create mutation in the coding sequence of an enzyme in order to study the role of specific residues in protein's structure and function. We introduced a nested-SOE-PCR (N -SOE-PCR) in order to increase the specificity and generating mutations in a gene by SOE-PCR. Genomic DNA from Bacillus thermocatenulatus was extracted. Nested PCR was used to amplify B. thermocatenulatus lipase gene variants, namely wild type and mutant, using gene specific and mutagenic specific primers, followed by cloning in a suitable vector. Briefly in N-SOE-PCR method, instead of two pairs of primers, three pairs of primers are used to amplify a mutagenic fragment. Moreover, the first and second PCR products are slightly longer than PCR products in a conventional SOE. PCR products obtained from the first round of PCR are used for the second PCR by applying the nested and mutated primers. Following to the purification of the amplified fragments, they will be subject of the further purification and will be used as template to perform the third round of PCR using gene specific primers. In the end, the products will be cloned into a suitable vector for subsequent application. In comparison to the conventional SOE-PCR, the improved method (i.e. N-SOE-PCR) increases the yield and specificity of the products. In addition, the proposed method shows a large reduction in the non-specific products. By applying two more primers in the conventional SOE, the specificity of the method will be improved. This would be in part due to annealing of the primers further inside the amplicon that increases both the efficiency and a better attachment of the primers. Positioning of the primer far from both ends of an amplicon leads to an enhanced binding as well as increased affinity in the third round of amplification in SOE.

Characterization and uniqueness of distinguished self-adjoint extensions of dirac operators

International Nuclear Information System (INIS)

Klaus, M.; Wuest, R.; Princeton Univ., NJ

1979-01-01

Distinguished self-adjoint extensions of Dirac operators are characterized by Nenciu and constructed by means of cut-off potentials by Wuest. In this paper it is shown that the existence and a more explicit characterization of Nenciu's self-adjoint extensions can be obtained as a consequence from results of the cut-off method, that these extensions are the same as the extensions constructed with cut-off potentials and that they are unique in some sense. (orig.) [de

AOAC Official MethodSM Matrix Extension Validation Study of Assurance GDSTM for the Detection of Salmonella in Selected Spices.

Science.gov (United States)

Feldsine, Philip; Kaur, Mandeep; Shah, Khyati; Immerman, Amy; Jucker, Markus; Lienau, Andrew

2015-01-01

Assurance GDSTM for Salmonella Tq has been validated according to the AOAC INTERNATIONAL Methods Committee Guidelines for Validation of Microbiological Methods for Food and Environmental Surfaces for the detection of selected foods and environmental surfaces (Official Method of AnalysisSM 2009.03, Performance Tested MethodSM No. 050602). The method also completed AFNOR validation (following the ISO 16140 standard) compared to the reference method EN ISO 6579. For AFNOR, GDS was given a scope covering all human food, animal feed stuff, and environmental surfaces (Certificate No. TRA02/12-01/09). Results showed that Assurance GDS for Salmonella (GDS) has high sensitivity and is equivalent to the reference culture methods for the detection of motile and non-motile Salmonella. As part of the aforementioned validations, inclusivity and exclusivity studies, stability, and ruggedness studies were also conducted. Assurance GDS has 100% inclusivity and exclusivity among the 100 Salmonella serovars and 35 non-Salmonella organisms analyzed. To add to the scope of the Assurance GDS for Salmonella method, a matrix extension study was conducted, following the AOAC guidelines, to validate the application of the method for selected spices, specifically curry powder, cumin powder, and chili powder, for the detection of Salmonella.

Barcode extension for analysis and reconstruction of structures

Science.gov (United States)

Myhrvold, Cameron; Baym, Michael; Hanikel, Nikita; Ong, Luvena L.; Gootenberg, Jonathan S.; Yin, Peng

2017-03-01

Collections of DNA sequences can be rationally designed to self-assemble into predictable three-dimensional structures. The geometric and functional diversity of DNA nanostructures created to date has been enhanced by improvements in DNA synthesis and computational design. However, existing methods for structure characterization typically image the final product or laboriously determine the presence of individual, labelled strands using gel electrophoresis. Here we introduce a new method of structure characterization that uses barcode extension and next-generation DNA sequencing to quantitatively measure the incorporation of every strand into a DNA nanostructure. By quantifying the relative abundances of distinct DNA species in product and monomer bands, we can study the influence of geometry and sequence on assembly. We have tested our method using 2D and 3D DNA brick and DNA origami structures. Our method is general and should be extensible to a wide variety of DNA nanostructures.

On logarithmic extensions of local scale-invariance

International Nuclear Information System (INIS)

Henkel, Malte

2013-01-01

Ageing phenomena far from equilibrium naturally present dynamical scaling and in many situations this may be generalised to local scale-invariance. Generically, the absence of time-translation-invariance implies that each scaling operator is characterised by two independent scaling dimensions. Building on analogies with logarithmic conformal invariance and logarithmic Schrödinger-invariance, this work proposes a logarithmic extension of local scale-invariance, without time-translation-invariance. Carrying this out requires in general to replace both scaling dimensions of each scaling operator by Jordan cells. Co-variant two-point functions are derived for the most simple case of a two-dimensional logarithmic extension. Their form is compared to simulational data for autoresponse functions in several universality classes of non-equilibrium ageing phenomena

Automatic labeling of MR brain images through extensible learning and atlas forests.

Science.gov (United States)

Xu, Lijun; Liu, Hong; Song, Enmin; Yan, Meng; Jin, Renchao; Hung, Chih-Cheng

2017-12-01

Multiatlas-based method is extensively used in MR brain images segmentation because of its simplicity and robustness. This method provides excellent accuracy although it is time consuming and limited in terms of obtaining information about new atlases. In this study, an automatic labeling of MR brain images through extensible learning and atlas forest is presented to address these limitations. We propose an extensible learning model which allows the multiatlas-based framework capable of managing the datasets with numerous atlases or dynamic atlas datasets and simultaneously ensure the accuracy of automatic labeling. Two new strategies are used to reduce the time and space complexity and improve the efficiency of the automatic labeling of brain MR images. First, atlases are encoded to atlas forests through random forest technology to reduce the time consumed for cross-registration between atlases and target image, and a scatter spatial vector is designed to eliminate errors caused by inaccurate registration. Second, an atlas selection method based on the extensible learning model is used to select atlases for target image without traversing the entire dataset and then obtain the accurate labeling. The labeling results of the proposed method were evaluated in three public datasets, namely, IBSR, LONI LPBA40, and ADNI. With the proposed method, the dice coefficient metric values on the three datasets were 84.17 ± 4.61%, 83.25 ± 4.29%, and 81.88 ± 4.53% which were 5% higher than those of the conventional method, respectively. The efficiency of the extensible learning model was evaluated by state-of-the-art methods for labeling of MR brain images. Experimental results showed that the proposed method could achieve accurate labeling for MR brain images without traversing the entire datasets. In the proposed multiatlas-based method, extensible learning and atlas forests were applied to control the automatic labeling of brain anatomies on large atlas datasets or dynamic

Research on Customer Value Based on Extension Data Mining

Science.gov (United States)

Chun-Yan, Yang; Wei-Hua, Li

Extenics is a new discipline for dealing with contradiction problems with formulize model. Extension data mining (EDM) is a product combining Extenics with data mining. It explores to acquire the knowledge based on extension transformations, which is called extension knowledge (EK), taking advantage of extension methods and data mining technology. EK includes extensible classification knowledge, conductive knowledge and so on. Extension data mining technology (EDMT) is a new data mining technology that mining EK in databases or data warehouse. Customer value (CV) can weigh the essentiality of customer relationship for an enterprise according to an enterprise as a subject of tasting value and customers as objects of tasting value at the same time. CV varies continually. Mining the changing knowledge of CV in databases using EDMT, including quantitative change knowledge and qualitative change knowledge, can provide a foundation for that an enterprise decides the strategy of customer relationship management (CRM). It can also provide a new idea for studying CV.

46 CFR 11.707 - Examination requirements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Examination requirements. 11.707 Section 11.707 Shipping... OFFICER ENDORSEMENTS Professional Requirements for Pilots § 11.707 Examination requirements. (a) An... required to pass the examination described in subpart I of this part. (b) An applicant for an extension of...

Non-arrhenius behavior in product life extension

International Nuclear Information System (INIS)

Dulka, C.P.; Scamman, J.F.

1988-01-01

The purpose of the work reported in this paper was to investigate contact sticking, which was determined to be caused by a materials shrinkage phenomenon. The phenomenon was noted after a brief accelerated thermal aging format, which was followed during the course of a General Electric materials analysis technique (GEMAT) product life extension program. The original qualification work did not address this phenomenon. This shrinkage phenomenon occurs in some materials and, depending upon the design of the product, could be a significant factor in a product life extension program. Further tests are planned in which this phenomenon will be investigated as a function of temperature and time duration in a GEMAT program. The extent of this phenomenon's effect on product life depends on type of material, product design, and product tolerances. Furthermore, this phenomenon may or may not exhibit an Arrhenius-type behavior, and more investigation is required in this area. In any product life extension program, the existence of this phenomenon and the degree to which it affects the product's life should be investigated. This phenomenon can be a significant factor

Sensitivity Analysis of Hydraulic Methods Regarding Hydromorphologic Data Derivation Methods to Determine Environmental Water Requirements

Directory of Open Access Journals (Sweden)

Alireza Shokoohi

2015-07-01

Full Text Available This paper studies the accuracy of hydraulic methods in determining environmental flow requirements. Despite the vital importance of deriving river cross sectional data for hydraulic methods, few studies have focused on the criteria for deriving this data. The present study shows that the depth of cross section has a meaningful effect on the results obtained from hydraulic methods and that, considering fish as the index species for river habitat analysis, an optimum depth of 1 m should be assumed for deriving information from cross sections. The second important parameter required for extracting the geometric and hydraulic properties of rivers is the selection of an appropriate depth increment; ∆y. In the present research, this parameter was found to be equal to 1 cm. The uncertainty of the environmental discharge evaluation, when allocating water in areas with water scarcity, should be kept as low as possible. The Manning friction coefficient (n is an important factor in river discharge calculation. Using a range of "n" equal to 3 times the standard deviation for the study area, it is shown that the influence of friction coefficient on the estimation of environmental flow is much less than that on the calculation of river discharge.

Challenges for extension service to render efficient post-transformer ...

African Journals Online (AJOL)

Ben Stevens

agriculture in South Africa and to make it more attractive and a profitable venture. ... Successful entrepreneurship requires a strong enabling environment of ... business. Many small-scale farmers and extension organisations understand ... entrepreneurs are not the same and there are obviously major differences between.

An Extensible Component-Based Multi-Objective Evolutionary Algorithm Framework

DEFF Research Database (Denmark)

Sørensen, Jan Corfixen; Jørgensen, Bo Nørregaard

2017-01-01

The ability to easily modify the problem definition is currently missing in Multi-Objective Evolutionary Algorithms (MOEA). Existing MOEA frameworks do not support dynamic addition and extension of the problem formulation. The existing frameworks require a re-specification of the problem definition...

78 FR 70584 - Extension of Information Collection; Comment Request

Science.gov (United States)

2013-11-26

... establishes arrangements to protect the rights of affected transit employees. Federal law requires such... DEPARTMENT OF LABOR Office of Labor-Management Standards Extension of Information Collection; Comment Request ACTION: Notice. SUMMARY: The Department of Labor, as part of its continuing effort to...

U.S. National and regional impacts nuclear plant life extension

International Nuclear Information System (INIS)

Makovick, L.; Fletcher, T.; Harrison, D.L.

1987-01-01

The purpose of this study was to evaluate the economic impacts of nuclear plant life extension on a national and regional level. Nuclear generating capacity is expected to reach 104 Gigawatts (119 units) in the 1994-1995 period. Nuclear units of the 1970 to 1980 vintage are expected to account for 96% of nuclear capacity. As operating licenses expire, a precipitous decline in nuclear capacity results, with an average of 5 gigawatts of capacity lost each year from 2010 to 2030. Without life extension, 95% of all nuclear capacity is retired between the years 2010 and 2030. Even with historically slow growth in electric demand and extensive fossil plant life extension, the need for new generating capacity in the 2010-2030 time period is eight times greater than installed nuclear capacity. Nuclear plant life extension costs and benefits were quantified under numerous scenarios using the DRI Electricity Market Model. Under a wide range of economic assumptions and investment requirements, nuclear plant life extension resulted in a net benefit to electricity consumers. The major source of net benefits from nuclear plant life extension results from the displacement of fossil-fired generating sources. In the most likely case, nuclear plant life extension provides a dollar 200 billion net savings through the year 2030. Regions with a large nuclear capacity share, newer nuclear units and relatively higher costs of alternative fuels benefit the most from life extension. This paper also discusses the importance of regulatory policies on nuclear plant life extension

Competency Modeling in Extension Education: Integrating an Academic Extension Education Model with an Extension Human Resource Management Model

Science.gov (United States)

Scheer, Scott D.; Cochran, Graham R.; Harder, Amy; Place, Nick T.

2011-01-01

The purpose of this study was to compare and contrast an academic extension education model with an Extension human resource management model. The academic model of 19 competencies was similar across the 22 competencies of the Extension human resource management model. There were seven unique competencies for the human resource management model.…

Proposed New Method of Interpretation of Infrared Ship Signature Requirements

NARCIS (Netherlands)

Neele, F.P.; Wilson, M.T.; Youern, K.

2005-01-01

new method of deriving and defining requirements for the infrared signature of new ships is presented. The current approach is to specify the maximum allowed temperature or radiance contrast of the ship with respect to its background. At present, in most NATO countries, it is the contractor’s

Three extensions to subtractive crosstalk reduction

NARCIS (Netherlands)

Smit, F.A.; Liere, van R.; Fröhlich, B.; Fröhlich, B.; Blach, R.; Liere, van R.

2007-01-01

Stereo displays suffer from crosstalk, an effect that reduces or even inhibits the viewer¿s ability to correctly fuse stereoscopic images. In this paper, three extensions for improved software crosstalk reduction are introduced. First, we propose a reduction method operating in CIELAB color space to

Generalized ensemble theory with non-extensive statistics

Science.gov (United States)

Shen, Ke-Ming; Zhang, Ben-Wei; Wang, En-Ke

2017-12-01

The non-extensive canonical ensemble theory is reconsidered with the method of Lagrange multipliers by maximizing Tsallis entropy, with the constraint that the normalized term of Tsallis' q -average of physical quantities, the sum ∑ pjq, is independent of the probability pi for Tsallis parameter q. The self-referential problem in the deduced probability and thermal quantities in non-extensive statistics is thus avoided, and thermodynamical relationships are obtained in a consistent and natural way. We also extend the study to the non-extensive grand canonical ensemble theory and obtain the q-deformed Bose-Einstein distribution as well as the q-deformed Fermi-Dirac distribution. The theory is further applied to the generalized Planck law to demonstrate the distinct behaviors of the various generalized q-distribution functions discussed in literature.

xSPDE: Extensible software for stochastic equations

Directory of Open Access Journals (Sweden)

Simon Kiesewetter

2016-01-01

Full Text Available We introduce an extensible software toolbox, xSPDE, for solving ordinary and partial stochastic differential equations. The toolbox makes extensive use of vector and parallel methods. Inputs are exceptionally simple, to reduce the learning curve, with default options for all of the many input parameters. The code calculates functional means, correlations and spectra, checks for errors in both time-step and sampling, and provides several choices of algorithm. Most aspects of the code, including the numerical algorithm, have a modular functional design to allow user modifications.

Nuclear power plants life extension and decommissioning its economic aspects

International Nuclear Information System (INIS)

Watanabe, Yoshiaki

1994-06-01

In USA where the development of nuclear power was started early, the life of nuclear power plants expires successively around the turn of century, and the serious hindrance to electric power supply is feared. Therefore, the research for extending 40 year approved period of operation is in progress. By the extension of life of nuclear power plants, huge cost reduction is estimated as compared with the construction of new plants. However, due to the rise of the cost for the life extension, there were the cases of forced decommissioning. In this book, the present state of the life extension of nuclear power stations, the economical assessment and analysis of the life extension by DOE, the economical assessment by MIDAS method of Electric Power Research Institute, the economical assessment by cost-benefit method of Northern States Power Co., the assessment of the long term operation possibility of nuclear power stations, the economical assessment system for the life extension in Japan, the present state of the decommissioning of nuclear power stations and that in USA, Canada and Europe, the assessment of the decommissioning cost by OECD/NEA, and the decommissioning cost for thermal power stations are described. (K.I.)

Method for calculating required shielding in medical x-ray rooms

International Nuclear Information System (INIS)

Karppinen, J.

1997-10-01

The new annual radiation dose limits - 20 mSv (previously 50 mSv) for radiation workers and 1 mSv (previously 5 mSv) for other persons - implies that the adequacy of existing radiation shielding must be re-evaluated. In principle, one could assume that the thicknesses of old radiation shields should be increased by about one or two half-value layers in order to comply with the new dose limits. However, the assumptions made in the earlier shielding calculations are highly conservative; the required shielding was often determined by applying the maximum high-voltage of the x-ray tube for the whole workload. A more realistic calculation shows that increased shielding is typically not necessary if more practical x-ray tube voltages are used in the evaluation. We have developed a PC-based calculation method for calculating the x-ray shielding which is more realistic than the highly conservative method formerly used. The method may be used to evaluate an existing shield for compliance with new regulations. As examples of these calculations, typical x-ray rooms are considered. The lead and concrete thickness requirements as a function of x-ray tube voltage and workload are also given in tables. (author)

Latency in Visionic Systems: Test Methods and Requirements

Science.gov (United States)

Bailey, Randall E.; Arthur, J. J., III; Williams, Steven P.; Kramer, Lynda J.

2005-01-01

A visionics device creates a pictorial representation of the external scene for the pilot. The ultimate objective of these systems may be to electronically generate a form of Visual Meteorological Conditions (VMC) to eliminate weather or time-of-day as an operational constraint and provide enhancement over actual visual conditions where eye-limiting resolution may be a limiting factor. Empirical evidence has shown that the total system delays or latencies including the imaging sensors and display systems, can critically degrade their utility, usability, and acceptability. Definitions and measurement techniques are offered herein as common test and evaluation methods for latency testing in visionics device applications. Based upon available data, very different latency requirements are indicated based upon the piloting task, the role in which the visionics device is used in this task, and the characteristics of the visionics cockpit display device including its resolution, field-of-regard, and field-of-view. The least stringent latency requirements will involve Head-Up Display (HUD) applications, where the visionics imagery provides situational information as a supplement to symbology guidance and command information. Conversely, the visionics system latency requirement for a large field-of-view Head-Worn Display application, providing a Virtual-VMC capability from which the pilot will derive visual guidance, will be the most stringent, having a value as low as 20 msec.

Multiple Kernel Sparse Representation based Orthogonal Discriminative Projection and Its Cost-Sensitive Extension.

Science.gov (United States)

Zhang, Guoqing; Sun, Huaijiang; Xia, Guiyu; Sun, Quansen

2016-07-07

Sparse representation based classification (SRC) has been developed and shown great potential for real-world application. Based on SRC, Yang et al. [10] devised a SRC steered discriminative projection (SRC-DP) method. However, as a linear algorithm, SRC-DP cannot handle the data with highly nonlinear distribution. Kernel sparse representation-based classifier (KSRC) is a non-linear extension of SRC and can remedy the drawback of SRC. KSRC requires the use of a predetermined kernel function and selection of the kernel function and its parameters is difficult. Recently, multiple kernel learning for SRC (MKL-SRC) [22] has been proposed to learn a kernel from a set of base kernels. However, MKL-SRC only considers the within-class reconstruction residual while ignoring the between-class relationship, when learning the kernel weights. In this paper, we propose a novel multiple kernel sparse representation-based classifier (MKSRC), and then we use it as a criterion to design a multiple kernel sparse representation based orthogonal discriminative projection method (MK-SR-ODP). The proposed algorithm aims at learning a projection matrix and a corresponding kernel from the given base kernels such that in the low dimension subspace the between-class reconstruction residual is maximized and the within-class reconstruction residual is minimized. Furthermore, to achieve a minimum overall loss by performing recognition in the learned low-dimensional subspace, we introduce cost information into the dimensionality reduction method. The solutions for the proposed method can be efficiently found based on trace ratio optimization method [33]. Extensive experimental results demonstrate the superiority of the proposed algorithm when compared with the state-of-the-art methods.

Evaluation of methods to estimate the essential amino acids requirements of fish from the muscle amino acid profile

Directory of Open Access Journals (Sweden)

Álvaro José de Almeida Bicudo

2014-03-01

Full Text Available Many methods to estimate amino acid requirement based on amino acid profile of fish have been proposed. This study evaluates the methodology proposed by Meyer & Fracalossi (2005 and by Tacon (1989 to estimate amino acids requirement of fish, which do exempt knowledge on previous nutritional requirement of reference amino acid. Data on amino acid requirement of pacu, Piaractus mesopotamicus, were used to validate de accuracy of those methods. Meyer & Fracalossi's and Tacon's methodology estimated the lysine requirement of pacu, respectively, at 13 and 23% above requirement determined using dose-response method. The values estimated by both methods lie within the range of requirements determined for other omnivorous fish species, the Meyer & Fracalossi (2005 method showing better accuracy.

The impact of brand extension fit, extension strategy and product exposure on attitudinal responses to brand extensions

OpenAIRE

Farstad, Lena Kvelland; Jabran, Mohammed

2013-01-01

Brand extensions have for decades been one of the most used strategies for growth, but the sad reality is that 8 out of 10 extensions fail, making the likelihood of failure unattractively high. In addition, competition and pressure on margins increases as retailers’ power improves due to proliferation of private labels. As a result, managers are eager for new innovative strategies that can differentiate their extension and improve likelihood of success. The purpose of this paper is therefore ...

76 FR 28242 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2011-05-16

... Reduction Act of 1995 (PRA95). 44 U.S.C. 3056(c)(2)(A). This program helps to ensure that requested data can..., collection instruments are clearly understood, and the impact of collection requirements on respondents can... part 549, Requirements of a ``Bona Fide Profit-Sharing Plan or Trust''. A copy of the proposed...

Coherent Synchrotron Radiation A Simulation Code Based on the Non-Linear Extension of the Operator Splitting Method

CERN Document Server

Dattoli, Giuseppe

2005-01-01

The coherent synchrotron radiation (CSR) is one of the main problems limiting the performance of high intensity electron accelerators. A code devoted to the analysis of this type of problems should be fast and reliable: conditions that are usually hardly achieved at the same time. In the past, codes based on Lie algebraic techniques have been very efficient to treat transport problem in accelerators. The extension of these method to the non-linear case is ideally suited to treat CSR instability problems. We report on the development of a numerical code, based on the solution of the Vlasov equation, with the inclusion of non-linear contribution due to wake field effects. The proposed solution method exploits an algebraic technique, using exponential operators implemented numerically in C++. We show that the integration procedure is capable of reproducing the onset of an instability and effects associated with bunching mechanisms leading to the growth of the instability itself. In addition, parametric studies a...

KidReporter : a method for engaging children in making a newspaper to gather user requirements

NARCIS (Netherlands)

Bekker, M.M.; Beusmans, J.; Keyson, D.V.; Lloyd, P.A.; Bekker, M.M.; Markopoulos, P.; Tsikalkina, M.

2002-01-01

We describe a design method, called the KidReporter method, for gathering user requirements from children. Two school classes participated in making a newspaper about a zoo, to gather requirements for the design process of an interactive educational game. The educational game was developed to

Fault tree construction of hybrid system requirements using qualitative formal method

International Nuclear Information System (INIS)

Lee, Jang-Soo; Cha, Sung-Deok

2005-01-01

When specifying requirements for software controlling hybrid systems and conducting safety analysis, engineers experience that requirements are often known only in qualitative terms and that existing fault tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. In this paper, we propose Causal Requirements Safety Analysis (CRSA) as a technique to qualitatively evaluate causal relationship between software faults and physical hazards. This technique, extending qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and relationship among them. Using a simplified electrical power system as an example, we describe step-by-step procedures of conducting CRSA. Our experience of applying CRSA to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates that CRSA is an effective technique in assisting safety engineers

Computing Preferred Extensions for Argumentation Systems with Sets of Attacking

DEFF Research Database (Denmark)

Nielsen, Søren Holbech; Parsons, Simon

2006-01-01

The hitherto most abstract, and hence general, argumentation system, is the one described by Dung in a paper from 1995. This framework does not allow for joint attacks on arguments, but in a recent paper we adapted it to support such attacks, and proved that this adapted framework enjoyed the same...... formal properties as that of Dung. One problem posed by Dung's original framework, which was neglected for some time, is how to compute preferred extensions of the argumentation systems. However, in 2001, in a paper by Doutre and Mengin, a procedure was given for enumerating preferred extensions...... for these systems. In this paper we propose a method for enumerating preferred extensions of the potentially more complex systems, where joint attacks are allowed. The method is inspired by the one given by Doutre and Mengin....

Repeatability of cervical joint flexion and extension within and between days

DEFF Research Database (Denmark)

Wang, Xu; Lindstroem, René; Plocharski, Maciej

2018-01-01

OBJECTIVE: The purpose of this study was to investigate within- and between-day repeatability of free and unrestricted healthy cervical flexion and extension motion when assessing dynamic cervical spine motion. METHODS: Fluoroscopy videos of 2 repeated cervical flexion and 2 repeated extension...

Methods for Automating Analysis of Glacier Morphology for Regional Modelling: Centerlines, Extensions, and Elevation Bands

Science.gov (United States)

Viger, R. J.; Van Beusekom, A. E.

2016-12-01

The treatment of glaciers in modeling requires information about their shape and extent. This presentation discusses new methods and their application in a new glacier-capable variant of the USGS PRMS model, a physically-based, spatially distributed daily time-step model designed to simulate the runoff and evolution of glaciers through time. In addition to developing parameters describing PRMS land surfaces (hydrologic response units, HRUs), several of the analyses and products are likely of interest to cryospheric science community in general. The first method is a (fully automated) variation of logic previously presented in the literature for definition of the glacier centerline. Given that the surface of a glacier might be convex, using traditional topographic analyses based on a DEM to trace a path down the glacier is not reliable. Instead a path is derived based on a cost function. Although only a single path is presented in our results, the method can be easily modified to delineate a branched network of centerlines for each glacier. The second method extends the glacier terminus downslope by an arbitrary distance, according to local surface topography. This product is can be used to explore possible, if unlikely, scenarios under which glacier area grows. More usefully, this method can be used to approximate glacier extents from previous years without needing historical imagery. The final method presents an approach for segmenting the glacier into altitude-based HRUs. Successful integration of this information with traditional approaches for discretizing the non-glacierized portions of a basin requires several additional steps. These include synthesizing the glacier centerline network with one developed with a traditional DEM analysis, ensuring that flow can be routed under and beyond glaciers to a basin outlet. Results are presented based on analysis of the Copper River Basin, Alaska.

Study of the Working Conditions of Health Extension Workers in ...

African Journals Online (AJOL)

Coverage: 2005-2009” of which “The Health Extension Program (HEP)” is a major component”. Objective: The study focuses on the first batch of Health Extension Workers (HEWs) with the overall objective of assessing the working conditions of HEWs and their job satisfaction. Methods: An in-depth field study was carried ...

Methods for ensuring compliance with regulatory requirements: regulators and operators

International Nuclear Information System (INIS)

Fleischmann, A.W.

1989-01-01

Some of the methods of ensuring compliance with regulatory requirements contained in various radiation protection documents such as Regulations, ICRP Recommendations etc. are considered. These include radiation safety officers and radiation safety committees, personnel monitoring services, dissemination of information, inspection services and legislative power of enforcement. Difficulties in ensuring compliance include outmoded legislation, financial and personnel constraints

76 FR 78230 - Notice of Request for Extension of Approval of an Information Collection; Requirements for...

Science.gov (United States)

2011-12-16

...: Extension of approval of an information collection. Abstract: The Plant Protection Act (PPA, 7 U.S.C. 7701... plant protection organizations, and producers. Estimated annual number of respondents: 37. Estimated... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2011-0112...

Extension of a dynamic headspace multi-volatile method to milliliter injection volumes with full sample evaporation: Application to green tea.

Science.gov (United States)

Ochiai, Nobuo; Sasamoto, Kikuo; Tsunokawa, Jun; Hoffmann, Andreas; Okanoya, Kazunori; MacNamara, Kevin

2015-11-20

An extension of multi-volatile method (MVM) technology using the combination of a standard dynamic headspace (DHS) configuration, and a modified DHS configuration incorporating an additional vacuum module, was developed for milliliter injection volume of aqueous sample with full sample evaporation. A prior step involved investigation of water management by weighing of the water residue in the adsorbent trap. The extended MVM for 1 mL aqueous sample consists of five different DHS method parameter sets including choice of the replaceable adsorbent trap. An initial two DHS sampling sets at 25°C with the standard DHS configuration using a carbon-based adsorbent trap target very volatile solutes with high vapor pressure (>10 kPa) and volatile solutes with moderate vapor pressure (1-10 kPa). Subsequent three DHS sampling sets at 80°C with the modified DHS configuration using a Tenax TA trap target solutes with low vapor pressure (88%) for 17 test aroma compounds and moderate recoveries (44-71%) for 4 test compounds. The method showed good linearity (r(2)>0.9913) and high sensitivity (limit of detection: 0.1-0.5 ng mL(-1)) even with MS scan mode. The improved sensitivity of the method was demonstrated with analysis of a wide variety of aroma compounds in brewed green tea. Compared to the original 100 μL MVM procedure, this extension to 1 mL MVM allowed detection of nearly twice the number of aroma compounds, including 18 potent aroma compounds from top-note to base-note (e.g. 2,3-butanedione, coumarin, furaneol, guaiacol, cis-3-hexenol, linalool, maltol, methional, 3-methyl butanal, 2,3,5-trimethyl pyrazine, and vanillin). Sensitivity for 23 compounds improved by a factor of 3.4-15 under 1 mL MVM conditions. Copyright © 2015 Elsevier B.V. All rights reserved.

42 CFR 84.146 - Method of measuring the power and torque required to operate blowers.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Method of measuring the power and torque required... RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.146 Method of measuring the power and torque.... These are used to facilitate timing. To determine the torque or horsepower required to operate the...

Standards applicable to owners and operators of hazardous waste treatment, storage, and disposal facilities; liability coverage requirements--Environmental Protection Agency. Final rule and notice of extension of effective date.

Science.gov (United States)

1982-07-13

The effective date for qualifications of insurers providing liability insurance used to satisfy liability coverage requirements applicable to owners or operators of hazardous waste management facilities, as such requirements are included in 40 CFR Parts 264 and 265, is extended from July 15, 1982, to October 16, 1982. The effective date for the rest of the liability coverage requirements remains July 15, 1982. This extension is being provided to allow 6 months between the date of promulgation and the effective date for the insurer qualification provision, in accordance with Section 3010(b) of the Resource Conservation and Recovery Act of 1976, as amended. During the period between July 15 and October 16, 1982, owners or operators may use certificates of insurance or policy endorsements that do not certify to the qualifications of the insurer.

The Use of Object-Oriented Analysis Methods in Surety Analysis

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

1999-05-01

Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automatic model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.

Competitive differentiation through brand extensions in the era of hyper competition

Directory of Open Access Journals (Sweden)

Claudiu-Catalin Munteanu

2015-03-01

Full Text Available In the era of hyper competition, competitive differentiation has become increasingly important. Brand extensions are used by companies across various industries for competitive differentiation. But in the era of hyper competition, a successful differentiation strategy requires that a brand emphasizes on uniqueness rather than commoditization. In this article, we make a case for creating a meaningful differentiation strategy. We emphasize the role of brand extensions for competitive differentiation and highlight the main perils of using brand extensions as a primary differentiation strategy. By using qualitative research, we identify primary objectives for brand extensions in practice. This investigation uses in-depth interviews with 14 senior brand managers across various industries to highlight brand portfolio strategies in relation to the brand differentiation strategy. Findings reveal that for business at the base of the pyramid, in markets such as Romania, brand managers are using brand extensions to increase sales or to boost short-term revenue rather than to implement a coherent differentiation strategy. We conclude with multiple recommendations for improving brand extension usage as a strategic instrument for creating meaningful differentiation in the era of hyper competition.

Extension of the Accurate Voltage-Sag Fault Location Method in Electrical Power Distribution Systems

Directory of Open Access Journals (Sweden)

Youssef Menchafou

2016-03-01

Full Text Available Accurate Fault location in an Electric Power Distribution System (EPDS is important in maintaining system reliability. Several methods have been proposed in the past. However, the performances of these methods either show to be inefficient or are a function of the fault type (Fault Classification, because they require the use of an appropriate algorithm for each fault type. In contrast to traditional approaches, an accurate impedance-based Fault Location (FL method is presented in this paper. It is based on the voltage-sag calculation between two measurement points chosen carefully from the available strategic measurement points of the line, network topology and current measurements at substation. The effectiveness and the accuracy of the proposed technique are demonstrated for different fault types using a radial power flow system. The test results are achieved from the numerical simulation using the data of a distribution line recognized in the literature.

Cooperative Extension as a Framework for Health Extension: The Michigan State University Model.

Science.gov (United States)

Dwyer, Jeffrey W; Contreras, Dawn; Eschbach, Cheryl L; Tiret, Holly; Newkirk, Cathy; Carter, Erin; Cronk, Linda

2017-10-01

The Affordable Care Act charged the Agency for Healthcare Research and Quality to create the Primary Care Extension Program, but did not fund this effort. The idea to work through health extension agents to support health care delivery systems was based on the nationally known Cooperative Extension System (CES). Instead of creating new infrastructure in health care, the CES is an ideal vehicle for increasing health-related research and primary care delivery. The CES, a long-standing component of the land-grant university system, features a sustained infrastructure for providing education to communities. The Michigan State University (MSU) Model of Health Extension offers another means of developing a National Primary Care Extension Program that is replicable in part because of the presence of the CES throughout the United States. A partnership between the MSU College of Human Medicine and MSU Extension formed in 2014, emphasizing the promotion and support of human health research. The MSU Model of Health Extension includes the following strategies: building partnerships, preparing MSU Extension educators for participation in research, increasing primary care patient referrals and enrollment in health programs, and exploring innovative funding. Since the formation of the MSU Model of Health Extension, researchers and extension professionals have made 200+ connections, and grants have afforded savings in salary costs. The MSU College of Human Medicine and MSU Extension partnership can serve as a model to promote health partnerships nationwide between CES services within land-grant universities and academic health centers or community-based medical schools.

Verifying Real-Time Systems using Explicit-time Description Methods

Directory of Open Access Journals (Sweden)

Hao Wang

2009-12-01

Full Text Available Timed model checking has been extensively researched in recent years. Many new formalisms with time extensions and tools based on them have been presented. On the other hand, Explicit-Time Description Methods aim to verify real-time systems with general untimed model checkers. Lamport presented an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables for time requirements. This paper proposes a new explicit-time description method with no reliance on global variables. Instead, it uses rendezvous synchronization steps between the Tick process and each system process to simulate time. This new method achieves better modularity and facilitates usage of more complex timing constraints. The two explicit-time description methods are implemented in DIVINE, a well-known distributed-memory model checker. Preliminary experiment results show that our new method, with better modularity, is comparable to Lamport's method with respect to time and memory efficiency.

Maximizing Program Delivery in Extension: Lessons from Leadership for Transformation.

Science.gov (United States)

Laughlin, Kevin M.; Schmidt, Janet L.

1995-01-01

Reviews advantages and disadvantages of four extension delivery methods: partnerships, master volunteer programs, information centers, and regional programs. Concluded that the key is matching individual, community, and emerging needs with the right method. (SK)

Radurisation of broilers for shelf life extension

International Nuclear Information System (INIS)

Bok, H.E.; Holzapfel, W.H.; Van der Linde, H.J.

1982-01-01

Radurization is discussed as a method for the shelf life extension of refrigerated chicken carcasses. One of the advantages is that radurization eliminates potential food pathogenic bacteria like Salmonella in the chicken carcasses. Materials and methods for the radurization of chicken are discussed. The objective of the investigation was to determine the influence of different irradiation doses and storage conditions on the microbiological shelf life and organoleptic quality of fresh broilers

Agricultural Extension: Farm Extension Services in Australia, Britain and the United States.

Science.gov (United States)

Williams, Donald B.

By analyzing the scope and structure of agricultural extension services in Australia, Great Britain, and the United States, this work attempts to set guidelines for measuring progress and guiding extension efforts. Extension training, agricultural policy, and activities of national, international, state, and provincial bodies are examined. The…

METHODS AND RESEARCH CONCERNING SERVICE LIFE EXTENSION OF SUPORTING STRUCTURES OF TRACTION ROLLING STOCK FOR INDUSTRIAL TRANSPORT

Directory of Open Access Journals (Sweden)

O. M. Bondarev

2014-04-01

Full Text Available Purpose. The purpose of work is scientifically grounded introduction of the acquired techniques into works for service life extension of the traction and motor rolling stock for industrial transport. Methodology. To achieve the purpose it was analyzed the acquired techniques for service life extension of the traction and motor rolling stock for mainline transport. The acquired techniques during solution of problems concerning the service life extension of rolling stock units were adapted to the locomotives TGM6A and traction aggregates OPE1. Findings. On the basis of experimental and theoretical complex of studies some results were obtained. They gave the ground to determine the possibility of acquired techniques use when solving the problems on service life extension of rolling stock units concerning locomotives TGM6A and traction aggregates OPE1. Originality. On the basis of conducted experimental and theoretical studies scientific maintenance of the works providing extension of service life of traction and motor units of industrial rolling stock was executed. Practical value. Technical solutions and measures, which have to be carried out during operation within the prolonged appointed service life of traction and motor units of industrial rolling stock enterprises using locomotives and traction aggregates to provide the basic technological cycles were developed.

A Formative Evaluation with Extension Educators: Exploring Implementation Approaches Using Web-based Methods

Directory of Open Access Journals (Sweden)

Adrienne M. Duke

2017-10-01

Full Text Available The article describes the formative evaluation of a bullying prevention program called Be SAFE from the perspective of Extension educators. Twelve regional and county educators from Family and Child Development and 4-H Youth Development participated in our study. We used a web-based, mixed methods approach, utilizing both Qualtrics, an online survey software platform, and Scopia, a video conferencing application, to collect survey data and do a focus group. The results of the survey show that three activities, Clear Mind, Mud Mind, Take a Stand, and The Relationship Continuum, were perceived as garnering the most participation from students. However, focus group data indicated that while there was often a high level of participation, the subject matter of the curriculum was too advanced for students in the fifth grade and that classroom size affected how well educators could teach lessons. Furthermore, school access was not an implementation challenge, but the amount of days available to implement the full curriculum was sometimes limited. The data collected through this formative evaluation were used to improve implementation efforts. The process outlined in this article can be used as a model to help program leaders who are interested in using web-based tools to evaluate implementation processes.

37 CFR 7.31 - Requirements for transformation of an extension of protection to the United States into a U.S...

Science.gov (United States)

2010-07-01

... transformation of an extension of protection to the United States into a U.S. application. 7.31 Section 7.31... transformation of an extension of protection to the United States into a U.S. application. If the International... transformation within three months of the date of cancellation of the international registration and include: (1...

Revised FAO methodology for crop-water requirements

International Nuclear Information System (INIS)

Smith, M.; Allen, R.; Pereira, L.

1998-01-01

In the early 1970s, the Food and Agriculture Organization of the United Nations (FAO) developed a practical procedure to estimate crop-water requirements that has become a widely accepted standard, in particular for irrigation studies. Since its publication as FAO Irrigation and Drainage Paper, new concepts and advances in research have revealed shortcomings in the methodology and made necessary a review and revision. A consultation of experts organized by FAO recommended the adoption of the Penman-Monteith combination method as a new standard for reference evapotranspiration, and advised on procedures for calculation of the various parameters. By defining the reference crop as hypothetical with an assumed height of 0.12 m, a surface resistance of 70 s m -1 and an albedo of 0.23, closely resembling the evaporation of an extensive surface of actively growing and adequately watered green grass of uniform height, the FAO Penman-Monteith method was developed, overcoming previous deficiencies and providing values more consistent with actual crop-water-use data worldwide. Furthermore, recommendations have been developed for the use of the FAO Penman-Monteith method with limited climatic data, largely eliminating the need for any other reference evapotranspiration methods and creating a consistent and transparent basis for a globally valid standard for crop-water-requirement calculations. (author)

Improvement suggestions on license extension management for civil nuclear safety equipment activities

International Nuclear Information System (INIS)

Sun Xingjian; Liu Hongji; Han Guoli; Jia Fengcai

2013-01-01

Based on the concepts of Clear Requirements, Comprehensive Review, Objective Assessment, Dynamic Management, this paper gives improvement suggestions on license extension management for civil nuclear safety equipment design, manufacture, installation and non-destructive examination activities, which include establishing a relatively unified license extension review standard, combining multi-views and close linking license review and supervision, full utilizing the daily supervision and inspection results, as well as further improving motivation and elimination mechanism. (authors)

Online Leader Training Course: Nebraska Equine Extension Leader Certification

Science.gov (United States)

Cottle, Lena; D'Angelo, Nicole

2015-01-01

The Nebraska Equine Advancement Level Leader Certification Program is an online learning tool that clarifies principles of the Nebraska 4-H Equine Advancement Programs. Through an online Moodle course through eXtension.org, 4-H leaders and Extension educators are able to fulfill the certification requirement from any location before allowing youth…

Private dentists assess treatment required as more extensive, demanding and costly, than public sector dentists.

Science.gov (United States)

Tuominen, Risto; Eriksson, Anna-Leena; Vahlberg, Tero

2012-08-01

The aim was to evaluate whether contracted private practitioners assess required treatment more extensive, demanding and economically more rewarding than mainly salaried public sector dentists and to estimate the cost consequences of using these alternative providers. All dental services included in comprehensive treatments funded by the city of Turku and provided to adult patients during the year 2009 were recorded. Patients were distributed randomly without any determination of treatment needs before appointing them to different dentists. Treatment courses for 7432 patients in public clinics included 63 906 procedures and for 2932 patients assigned to treatment by contracted private practitioners included 21 194 procedures. Public sector dentists were mainly salaried with production incentives, and private practitioners worked purely on a fee-for-service basis. The cost estimates were based on the distributions of competence classifications recorded by the providers, which also formed the basis for reimbursement. For each studied treatment category with more than one competence classification, private contractors were less likely than their public sector counterparts to give an assessment of simple or less demanding: 8% versus 29% of examinations, 46% versus 69% of periodontal treatments, 63% versus 85% of extractions, 31% versus 46% of fillings, 18% versus 35% of root canals. The excess cost to society varied from 7.0% for root canal treatments to 21.3% for extractions, causing on average 14.4% higher cost level from use of private practitioners compared with public sector dentists. Private practitioners systematically classified the treatment procedures they provided as more demanding, and therefore more economically rewarding, than their public sector counterparts. The findings indicate that the costs of publicly funded dental care may be increased by the use of private dental contractors. © 2012 John Wiley & Sons A/S.

Subscale Carbon-Carbon Nozzle Extension Development and Hot Fire Testing in Support of Upper Stage Liquid Rocket Engines

Science.gov (United States)

Gradl, Paul; Valentine, Peter; Crisanti, Matthew; Greene, Sandy Elam

2016-01-01

Upper stage and in-space liquid rocket engines are optimized for performance through the use of high area ratio nozzles to fully expand combustion gases to low exit pressures increasing exhaust velocities. Due to the large size of such nozzles and the related engine performance requirements, carbon-carbon (C/C) composite nozzle extensions are being considered for use in order to reduce weight impacts. NASA and industry partner Carbon-Carbon Advanced Technologies (C-CAT) are working towards advancing the technology readiness level of large-scale, domestically-fabricated, C/C nozzle extensions. These C/C extensions have the ability to reduce the overall costs of extensions relative to heritage metallic and composite extensions and to decrease weight by 50%. Material process and coating developments have advanced over the last several years, but hot fire testing to fully evaluate C/C nozzle extensions in relevant environments has been very limited. NASA and C-CAT have designed, fabricated and hot fire tested multiple subscale nozzle extension test articles of various C/C material systems, with the goal of assessing and advancing the manufacturability of these domestically producible materials as well as characterizing their performance when subjected to the typical environments found in a variety of liquid rocket and scramjet engines. Testing at the MSFC Test Stand 115 evaluated heritage and state-of-the-art C/C materials and coatings, demonstrating the capabilities of the high temperature materials and their fabrication methods. This paper discusses the design and fabrication of the 1.2k-lbf sized carbon-carbon nozzle extensions, provides an overview of the test campaign, presents results of the hot fire testing, and discusses potential follow-on development work.

APPLYING PETRI NETS EXTENSIONS TO MODELING COMMERCIAL BANK ACTIVITY

Directory of Open Access Journals (Sweden)

Igor ENICOV

2017-02-01

Full Text Available The relevance of the study is determined by the need to improve the methods of modeling andsimulating commercial bank activity, including for the purpose of calculating, controlling and managingthe risk of the bank, in the context of the transition to the application of Basel III standards. Thisimprovement becomes necessary due to a direct transition to new regulatory standards when the internalassessments of the main risks become the initial data for calculating the capital adequacy of a bank. Thepurpose of this article is to argue the opportunity to formulate a theory of the commercial bank model onthe extensions of Petri nets theory. The main methods of research were the method of scientific abstractionand method of logical analysis. The main result obtained in the study and presented in the article is theargumentation of the possibility to analyze the quantitative and qualitative characteristics of acommercial bank with the help of Petri net extensions.

Reduction in requirements for allogeneic blood products: nonpharmacologic methods.

Science.gov (United States)

Hardy, J F; Bélisle, S; Janvier, G; Samama, M

1996-12-01

Various strategies have been proposed to decrease bleeding and allogeneic transfusion requirements during and after cardiac operations. This article attempts to document the usefulness, or lack thereof, of the nonpharmacologic methods available in clinical practice. Blood conservation methods were reviewed in chronologic order, as they become available to patients during the perisurgical period. The literature in support of or against each strategy was reexamined critically. Avoidance of preoperative anemia and adherence to published guidelines for the practice of transfusion are of paramount importance. Intraoperatively, tolerance of low hemoglobin concentrations and use of autologous blood (predonated or harvested before bypass) will reduce allogeneic transfusions. The usefulness of plateletpheresis and retransfusion of shed mediastinal fluid remains controversial. Intraoperatively and postoperatively, maintenance of normothermia contributes to improved hemostasis. Several approaches have been shown to be effective. An efficient combination of methods can reduce, and sometimes abolish, the need for allogeneic blood products after cardiac operations, inasmuch as all those involved in the care of cardiac surgical patients adhere thoughtfully to existing transfusion guidelines.

75 FR 79030 - Proposed Extension of Existing Information Collection; Training Plans and Records of Training

Science.gov (United States)

2010-12-17

... Extension of Existing Information Collection; Training Plans and Records of Training AGENCY: Mine Safety and... extension of the information collection for Training Plans and Records of Training, 30 CFR 48.3, 48.9, 48.23... require training plans for underground and surface mines, respectively. The standards are intended to...

Ageing of materials and methods for the assessment and extension of lifetimes of engineering plant

International Nuclear Information System (INIS)

Stumpf, W.E.

1994-01-01

Life-extension (LIFEX) strategies for engineering plant are discussed against the background of the decline in the level of sustainability of the global environment. By directing LIFEX strategies towards better energy efficiency, better pollution control and higher quality throughputs, a significant contribution can be made to establishing more acceptable limits of sustainability. The decision-making process and implementation management of life extension are briefly examined. The question as to whether LIFEX programmes can contribute to the creation of wealth within acceptable limits of sustainability is addressed by considering past trends and future developments in both the fossil-fuelled and nuclear power industries. (UK)

Extension-twist coupling of composite circular tubes with application to tilt rotor blade design

Science.gov (United States)

Nixon, Mark W.

1987-01-01

This investigation was conducted to determine if twist deformation required for the design of full-scale extension-twist-coupled tilt-rotor blades can be achieved within material design limit loads, and to demonstrate the accuracy of a coupled-beam analysis in predicting twist deformations. Two extension-twist-coupled tilt-rotor blade designs were developed based on theoretically optimum aerodynamic twist distributions. The designs indicated a twist rate requirement of between .216 and .333 deg/in. Agreement between axial tests and analytical predictions was within 10 percent at design limit loads. Agreement between the torsion tests and predictions was within 11 percent.

The role of the extensive margin in export of Turkey: A comparative analysis

Directory of Open Access Journals (Sweden)

Altan Aldan

2016-06-01

Full Text Available We examine the role of extensive margin, in other words, new export products and destinations, on Turkish export performance between 1995 and 2013, in comparison with some other countries. We use two complementary methods together with several extensions taking into account critiques in the literature. Our results suggest that, Turkey was quite successful in extending its extensive margin compared to other developing countries. The growth of extensive margin mostly comes from entering into new markets. Nevertheless, the level of the extensive margin is still low as of 2013 compared to the other countries. Turkey still has important opportunities to increase its exports via extensive margin especially in products.

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

Directory of Open Access Journals (Sweden)

Nederhof Esther

2012-07-01

Full Text Available Abstract Background Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. Methods First, we compared first wave (T1 easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents’ Individual Lives Survey (TRAILS, a prospective population based cohort study of Dutch (preadolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56, 50.8% girls, with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60, 52.3% girls were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP, intelligence (IQ, education, sociometric status, substance use, and psychopathology. Results First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

Science.gov (United States)

2012-01-01

Background Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. Methods First, we compared first wave (T1) easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents’ Individual Lives Survey (TRAILS), a prospective population based cohort study of Dutch (pre)adolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56), 50.8% girls), with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60), 52.3% girls) were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP), intelligence (IQ), education, sociometric status, substance use, and psychopathology. Results First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit) were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005). Conclusions First, extensive

Pricing of brand extensions based on perceptions of brand equity

Directory of Open Access Journals (Sweden)

Panagiotis Arsenos

2018-04-01

Full Text Available The paper explores the role of brand equity when pricing hypothetical brand extensions. Companies tend to use different pricing techniques for their products, and their pricing decisions are based on many factors, including image and category fit of the product with the existing image and products of the company. Brand extensions are usually investigated from a consumer perspective, focusing on the extension attitude, however, it is essential to understand the corporate decision-making process regarding pricing. Exploring this matter using quantitative research methods, the study provides empirical evidence that companies that have invested heavily in marketing actions in the past and have built strong brand equity over-time, show flexibility in the mark-up during the cost decision-making process of a hypothetical brand extensions. Variations in mark-up percentages are also observed when there is a difference in image and category fit of the extension to the original brand. However, companies characterized by greater brand equity exhibited greater flexibility in the mark-up percentages, even for low fit extensions.

Comparison of different methods to extract the required coefficient of friction for level walking.

Science.gov (United States)

Chang, Wen-Ruey; Chang, Chien-Chi; Matz, Simon

2012-01-01

The required coefficient of friction (RCOF) is an important predictor for slip incidents. Despite the wide use of the RCOF there is no standardised method for identifying the RCOF from ground reaction forces. This article presents a comparison of the outcomes from seven different methods, derived from those reported in the literature, for identifying the RCOF from the same data. While commonly used methods are based on a normal force threshold, percentage of stance phase or time from heel contact, a newly introduced hybrid method is based on a combination of normal force, time and direction of increase in coefficient of friction. Although no major differences were found with these methods in more than half the strikes, significant differences were found in a significant portion of strikes. Potential problems with some of these methods were identified and discussed and they appear to be overcome by the hybrid method. No standard method exists for determining the required coefficient of friction (RCOF), an important predictor for slipping. In this study, RCOF values from a single data set, using various methods from the literature, differed considerably for a significant portion of strikes. A hybrid method may yield improved results.

Trials and Triumphs of Expanded Extension Programs.

Science.gov (United States)

Leavengood, Scott; Love, Bob

1998-01-01

Oregon extension faced challenges in presenting programs in the wood products industry. Several traditional tactics, revised to suit a new audience, have proved successful: personal coaching, building partnerships, and providing a high level of service. Newer methods, such as database marketing and distance learning, are also proving to be…

Improvement of Engineering Students' Communication Skills in English through Extensive Reading

Science.gov (United States)

Nishizawa, Hitoshi; Yoshioka, Takayoshi; Itoh, Kazuaki

The students' communication skills in English have improved after introducing Extensive Reading courses into the curriculum of Electrical and Electronic Engineering Department. The students' average TOEIC scores, which used to be far lower than the ones of students in other educational institutions, have increased in recent two years. The students who used to avoid learning English have welcomed extensive reading of graded readers for foreign learners and books for native children of English. This is because the extensive reading causes less stress and it is enjoyable. The students who have read more than 0.2 million words of English texts have faster reading speed and more confidence in reading. They seem to change their reading style from English-to-Japanese translation (and comprehension in Japanese) to direct comprehension in English. Their listening comprehension is also improved. Extensive reading is an effective educational method to improve English communication skills of engineering students, and it also becomes a useful method of continuous education for engineers in need of improving their skills.

Specification and Preliminary Validation of IAT (Integrated Analysis Techniques) Methods: Executive Summary.

Science.gov (United States)

1985-03-01

conceptual framwork , and preliminary validation of IAT concepts. Planned work for FY85, including more extensive validation, is also described. 20...Developments: Required Capabilities .... ......... 10 2-1 IAT Conceptual Framework - FY85 (FEO) ..... ........... 11 2-2 Recursive Nature of Decomposition...approach: 1) Identify needs & requirements for IAT. 2) Develop IAT conceptual framework. 3) Validate IAT methods. 4) Develop applications materials. To

Comparison of different passive knee extension torque-angle assessments

International Nuclear Information System (INIS)

Freitas, Sandro R; Vaz, João R; Bruno, Paula M; Valamatos, Maria J; Mil-Homens, Pedro

2013-01-01

Previous studies have used isokinetic dynamometry to assess joint torques and angles during passive extension of the knee, often without reporting upon methodological errors and reliability outcomes. In addition, the reliability of the techniques used to measure passive knee extension torque-angle and the extent to which reliability may be affected by the position of the subjects is also unclear. Therefore, we conducted an analysis of the intra- and inter-session reliability of two methods of assessing passive knee extension: (A) a 2D kinematic analysis coupled to a custom-made device that enabled the direct measurement of resistance to stretch and (B) an isokinetic dynamometer used in two testing positions (with the non-tested thigh either flexed at 45° or in the neutral position). The intra-class correlation coefficients (ICCs) of torque, the slope of the torque-angle curve, and the parameters of the mathematical model that were fit to the torque-angle data for the above conditions were measured in sixteen healthy male subjects (age: 21.4 ± 2.1 yr; BMI: 22.6 ± 3.3 kg m −2 ; tibial length: 37.4 ± 3.4 cm). The results found were: (1) methods A and B led to distinctly different torque-angle responses; (2) passive torque-angle relationship and stretch tolerance were influenced by the position of the non-tested thigh; and (3) ICCs obtained for torque were higher than for the slope and for the mathematical parameters that were fit to the torque-angle curve. In conclusion, the measurement method that is used and the positioning of subjects can influence the passive knee extension torque-angle outcome. (paper)

EMMA: An Extensible Mammalian Modular Assembly Toolkit for the Rapid Design and Production of Diverse Expression Vectors.

Science.gov (United States)

Martella, Andrea; Matjusaitis, Mantas; Auxillos, Jamie; Pollard, Steven M; Cai, Yizhi

2017-07-21

Mammalian plasmid expression vectors are critical reagents underpinning many facets of research across biology, biomedical research, and the biotechnology industry. Traditional cloning methods often require laborious manual design and assembly of plasmids using tailored sequential cloning steps. This process can be protracted, complicated, expensive, and error-prone. New tools and strategies that facilitate the efficient design and production of bespoke vectors would help relieve a current bottleneck for researchers. To address this, we have developed an extensible mammalian modular assembly kit (EMMA). This enables rapid and efficient modular assembly of mammalian expression vectors in a one-tube, one-step golden-gate cloning reaction, using a standardized library of compatible genetic parts. The high modularity, flexibility, and extensibility of EMMA provide a simple method for the production of functionally diverse mammalian expression vectors. We demonstrate the value of this toolkit by constructing and validating a range of representative vectors, such as transient and stable expression vectors (transposon based vectors), targeting vectors, inducible systems, polycistronic expression cassettes, fusion proteins, and fluorescent reporters. The method also supports simple assembly combinatorial libraries and hierarchical assembly for production of larger multigenetic cargos. In summary, EMMA is compatible with automated production, and novel genetic parts can be easily incorporated, providing new opportunities for mammalian synthetic biology.

Workplace Issues in Extension--A Delphi Study of Extension Educators

Science.gov (United States)

Kroth, Michael; Peutz, Joey

2011-01-01

Using the Delphi technique, expert Extension educators identified and prioritized those workplace issues they believe will be the most important to attract, motivate, and retain Extension educators/agents over the next 5 to 7 years. Obtaining and then utilizing a talented, highly motivated workforce during a period when many will be retiring will…

Study on risk insight for additional ILRT interval extension

International Nuclear Information System (INIS)

Seo, M. R.; Hong, S. Y.; Kim, M. K.; Chung, B. S.; Oh, H. C.

2005-01-01

In U.S., the containment Integrated Leakage Rate Test (ILRT) interval was extended from 3 times per 10 years to once per 10 years based on NUREG-1493 'Performance-Based Containment Leak-Test Program' in 1995. In September, 2001, ILRT interval was extended up to once per 15 years based on Nuclear Energy Industry (NEI) provisional guidance 'Interim Guidance for Performing Risk Impact Assessments In Support of One-Time Extensions for Containment Integrated Leakage Rate Test Surveillance Intervals'. In Korea, the containment ILRT was performed with 5 year interval. But, in MOST(Ministry of Science and Technology) Notice 2004-15 'Standard for the Leak- Rate Test of the Nuclear Reactor Containment', the extension of the ILRT interval to once per 10 year can be allowed if some conditions are met. So, the safety analysis for the extension of Yonggwang Nuclear (YGN) Unit 1 and 2 ILRT interval extension to once per 10 years was completed based on the methodology in NUREG-1493. But, during review process by regulatory body, KINS, it was required that some various risk insight or index for risk analysis should be developed. So, we began to study NEI interim report for 15 year ILRT interval extension. As previous analysis based on NUREG-1493, MACCS II (MELCOR Accident Consequence Code System) computer code was used for the risk analysis of the population, and the population dose was selected as a reference index for the risk evaluation

Program to justify life extension of older nuclear piping systems

International Nuclear Information System (INIS)

Burr, T.K.; Dwight, J.E. Jr.; Morton, D.K.

1991-01-01

The Idaho National Engineering Laboratory (INEL) has a history of more than 40 years devoted to the operation of nuclear reactors designed for research and experiments. The Advanced Test Reactor (ATR) is one such operating reactor whose mission requires continued operation for an additional 25 years or more. Since the ATR is approaching its design life of twenty years, life extension evaluations have been initiated. Of particular importance are the associated high temperature, high pressure loop piping system supporting in--reactor experiments. Failure of this piping could challenge core safety margins. Since regulatory rules for nuclear power plant life extension are only in the formulation stage, the current technical guidance on this subject provided by the Department of Energy (DOE) or the commercial nuclear industry is incomplete. In the interim, order to assure continued safe operation of this piping beyond its initial design life, a program has been developed to provide the necessary technical justification for life extension. This paper describes a program that establishes Section 11 of the ASME Boiler and Pressure Vessel Code as the governing criteria document, retains B31.1 as the Code of record for Section 11 activities, specifies additional inservice inspection requirements more strict than Section 11, and relies heavily on flaw detection and fracture mechanics evaluations. 18 refs., 2 figs

What is Unique About Extension Personnel in the City?

Directory of Open Access Journals (Sweden)

Julie Fox

2017-06-01

Full Text Available Extension’s pursuit to better attract, develop, retain, and structure competent personnel in the city requires new strategies to build on the knowledge base established through previous research and practice. With the support of numerous national organizations, this study utilized a Competency Framework Development (CFD process to systematically tap into the knowledge of County Extension Directors serving in large urban communities. Findings indicated these local leaders need specific knowledge, skills, attitudes, and beliefs that are both similar and unique when compared with results from other Extension competency studies. Competencies identified included building social and financial capital, strategic planning and organizing, resource attraction and management, advocacy and impact accountability with multiple stakeholders, and others. A primary difference was that diversity, complexity, and scale in urban communities influenced the extent to which competencies are demonstrated. Research results can be applied to a competency model that incorporates intentional recruiting and hiring practices that reflect the diversity and priorities of the community, competency-based professional development, competitive compensation and retention tactics, and staffing structure and strategies. Further research can include CFD with various types of Extension personnel and perspectives. Extension leaders can continue learning alongside others who can help inform administrators about human capital policies and practices.

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures.

NARCIS (Netherlands)

Creugers, N.H.J.; Witter, D.J.; Spijker, A. van 't; Gerritsen, A.E.; Kreulen, C.M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches

Nuclear plant life extension

International Nuclear Information System (INIS)

Negin, C.A.

1989-01-01

The nuclear power industry's addressing of life extension is a natural trend in the maturation of this technology after 20 years of commercial operation. With increasing emphasis on how plants are operated, and less on how to build them, attention is turning on to maximizing the use of these substantial investments. The first studies of life extension were conducted in the period from 1978 and 1982. These were motivated by the initiation, by the Nuclear Regulatory Commission (NRC), of studies to support decommissioning rulemaking. The basic conclusions of those early studies that life extension is feasible and worth pursuing have not been changed by the much more extensive investigations that have since been conducted. From an engineering perspective, life extension for nuclear plants is fundamentally the same as for fossil plants

78 FR 13656 - Agency Information Collection Extension

Science.gov (United States)

2013-02-28

..., implementation, and evaluation of energy policy and legislation. Data are used directly in EIA web reports... administrative processes and to improve data quality. The Form EIA-23L sampling method will change from a... for a three-year extension, with changes, of its Oil and Gas Reserves System Surveys (OGRS) forms (OMB...

Farmers and Extension Personnel View of Constraints to Effective ...

African Journals Online (AJOL)

E M IGBOKWE

effectiveness of agricultural extension services in Oyo State, Nigeria. ... of farmers but include assisting farmer to form groups, dealing with marketing issues, ... traditional methods of farming system and animal husbandry practice, hence.

Extension of moment projection method to the fragmentation process

International Nuclear Information System (INIS)

Wu, Shaohua; Yapp, Edward K.Y.; Akroyd, Jethro; Mosbach, Sebastian; Xu, Rong; Yang, Wenming; Kraft, Markus

2017-01-01

The method of moments is a simple but efficient method of solving the population balance equation which describes particle dynamics. Recently, the moment projection method (MPM) was proposed and validated for particle inception, coagulation, growth and, more importantly, shrinkage; here the method is extended to include the fragmentation process. The performance of MPM is tested for 13 different test cases for different fragmentation kernels, fragment distribution functions and initial conditions. Comparisons are made with the quadrature method of moments (QMOM), hybrid method of moments (HMOM) and a high-precision stochastic solution calculated using the established direct simulation algorithm (DSA) and advantages of MPM are drawn.

Extension of moment projection method to the fragmentation process

Energy Technology Data Exchange (ETDEWEB)

Wu, Shaohua [Department of Mechanical Engineering, National University of Singapore, Engineering Block EA, Engineering Drive 1, 117576 (Singapore); Yapp, Edward K.Y.; Akroyd, Jethro; Mosbach, Sebastian [Department of Chemical Engineering and Biotechnology, University of Cambridge, New Museums Site, Pembroke Street, Cambridge, CB2 3RA (United Kingdom); Xu, Rong [School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, 637459 (Singapore); Yang, Wenming [Department of Mechanical Engineering, National University of Singapore, Engineering Block EA, Engineering Drive 1, 117576 (Singapore); Kraft, Markus, E-mail: mk306@cam.ac.uk [Department of Chemical Engineering and Biotechnology, University of Cambridge, New Museums Site, Pembroke Street, Cambridge, CB2 3RA (United Kingdom); School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, 637459 (Singapore)

2017-04-15

The method of moments is a simple but efficient method of solving the population balance equation which describes particle dynamics. Recently, the moment projection method (MPM) was proposed and validated for particle inception, coagulation, growth and, more importantly, shrinkage; here the method is extended to include the fragmentation process. The performance of MPM is tested for 13 different test cases for different fragmentation kernels, fragment distribution functions and initial conditions. Comparisons are made with the quadrature method of moments (QMOM), hybrid method of moments (HMOM) and a high-precision stochastic solution calculated using the established direct simulation algorithm (DSA) and advantages of MPM are drawn.

Development of a support system to make economic and technical assessments for the issues relating to plant life extension

International Nuclear Information System (INIS)

Takao, T.; Soneda, N.; Sakai, T.

1994-01-01

To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

Corrigan-Ramond Extension of QCD at Nonzero Baryon Density

DEFF Research Database (Denmark)

T. Frandsen, M.; Kouvaris, Christoforos; Sannino, F.

2006-01-01

We investigate the Corrigan-Ramond extension of one massless flavor Quantum Chromo Dynamics at nonzero quark chemical potential. Since the extension requires the fermions to transform in the two index antisymmetric representation of the gauge group, one finds that the number of possible channels ......-Grigoriev-Rubakov chiral waves. We discover, differently from the 't Hooft limit, the possibility of a colored chiral wave breaking the color symmetry as well as translation invariance....... is richer than in the 't Hooft limit. We first discuss the diquark channels and show that for a number of colors larger than three a new diquark channel appears. We then study the infinite number of color limit and show that the Fermi surface is unstable to the formation of the Deryagin...

N=1 supersymmetric extension of the baby Skyrme model

International Nuclear Information System (INIS)

Adam, C.; Queiruga, J. M.; Sanchez-Guillen, J.; Wereszczynski, A.

2011-01-01

We construct a method to supersymmetrize higher kinetic terms and apply it to the baby Skyrme model. We find that there exist N=1 supersymmetric extensions for baby Skyrme models with arbitrary potential.

Old people's extensive traumatic cerebral infarction (analysis of 48 cases)

International Nuclear Information System (INIS)

Xu Wenhui

2000-01-01

Objective: To analyse clinically the genetic mechanism, clinical characteristics and the prognosis of old people's extensive traumatic cerebral infarction. Method: Forty eight such cases have been observed and analysed. Results: Old people's extensive traumatic cerebral infarction had its characteristics, which occurred mostly in the blood supply area of big branch blood vessels, and had observed nerve function defect. Conclusion: It has more clinical complication and bad prognosis. The death rate is high

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study.

Science.gov (United States)

Nederhof, Esther; Jörg, Frederike; Raven, Dennis; Veenstra, René; Verhulst, Frank C; Ormel, Johan; Oldehinkel, Albertine J

2012-07-02

Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. First, we compared first wave (T1) easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents' Individual Lives Survey (TRAILS), a prospective population based cohort study of Dutch (pre)adolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56), 50.8% girls), with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60), 52.3% girls) were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP), intelligence (IQ), education, sociometric status, substance use, and psychopathology. First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit) were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005). First, extensive recruitment effort at the first

Priorities for Extension.

Science.gov (United States)

Hayward, J. A.

Agricultural extension is one component in an array including research, training, education, marketing, international trade, etc. which develop together to bring about growth, and sustained growth determines the priorities for extension. These priorities depend inevitably on the stage of development of a country or region, and on the current…

An extensive analysis of disease-gene associations using network integration and fast kernel-based gene prioritization methods

Science.gov (United States)

Valentini, Giorgio; Paccanaro, Alberto; Caniza, Horacio; Romero, Alfonso E.; Re, Matteo

2014-01-01

Objective In the context of “network medicine”, gene prioritization methods represent one of the main tools to discover candidate disease genes by exploiting the large amount of data covering different types of functional relationships between genes. Several works proposed to integrate multiple sources of data to improve disease gene prioritization, but to our knowledge no systematic studies focused on the quantitative evaluation of the impact of network integration on gene prioritization. In this paper, we aim at providing an extensive analysis of gene-disease associations not limited to genetic disorders, and a systematic comparison of different network integration methods for gene prioritization. Materials and methods We collected nine different functional networks representing different functional relationships between genes, and we combined them through both unweighted and weighted network integration methods. We then prioritized genes with respect to each of the considered 708 medical subject headings (MeSH) diseases by applying classical guilt-by-association, random walk and random walk with restart algorithms, and the recently proposed kernelized score functions. Results The results obtained with classical random walk algorithms and the best single network achieved an average area under the curve (AUC) across the 708 MeSH diseases of about 0.82, while kernelized score functions and network integration boosted the average AUC to about 0.89. Weighted integration, by exploiting the different “informativeness” embedded in different functional networks, outperforms unweighted integration at 0.01 significance level, according to the Wilcoxon signed rank sum test. For each MeSH disease we provide the top-ranked unannotated candidate genes, available for further bio-medical investigation. Conclusions Network integration is necessary to boost the performances of gene prioritization methods. Moreover the methods based on kernelized score functions can further

GPU accelerated Discrete Element Method (DEM) molecular dynamics for conservative, faceted particle simulations

Energy Technology Data Exchange (ETDEWEB)

Spellings, Matthew [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Marson, Ryan L. [Materials Science & Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Anderson, Joshua A. [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Glotzer, Sharon C., E-mail: sglotzer@umich.edu [Chemical Engineering, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States); Materials Science & Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, MI 48109 (United States); Biointerfaces Institute, University of Michigan, 2800 Plymouth Rd., Ann Arbor, MI 48109 (United States)

2017-04-01

Faceted shapes, such as polyhedra, are commonly found in systems of nanoscale, colloidal, and granular particles. Many interesting physical phenomena, like crystal nucleation and growth, vacancy motion, and glassy dynamics are challenging to model in these systems because they require detailed dynamical information at the individual particle level. Within the granular materials community the Discrete Element Method has been used extensively to model systems of anisotropic particles under gravity, with friction. We provide an implementation of this method intended for simulation of hard, faceted nanoparticles, with a conservative Weeks–Chandler–Andersen (WCA) interparticle potential, coupled to a thermodynamic ensemble. This method is a natural extension of classical molecular dynamics and enables rigorous thermodynamic calculations for faceted particles.

Development of a method for the comparison of final repository sites in different host rock formations; Weiterentwicklung einer Methode zum Vergleich von Endlagerstandorten in unterschiedlichen Wirtsgesteinsformationen

Energy Technology Data Exchange (ETDEWEB)

Fischer-Appelt, Klaus; Frieling, Gerd; Kock, Ingo; and others

2017-10-15

The report on the development of a method for the comparison of final repository sites in different host rock formations covers the following issues: influence of the requirement of retrievability on the methodology, study on the possible extension of the methodology for repository sites with crystalline host rocks: boundary conditions in Germany, final disposal concept for crystalline host rocks, generic extension of the VerSi method, identification, classification and relevance weighting of safety functions, relevance of the safety functions for the crystalline host rock formation, review of the methodological need for changes for crystalline rock sites under low-permeability covering; study on the applicability of the methodology for the determination of site regions for surface exploitation (phase 1).

Adjust the method of the FMEA to the requirements of the aviation industry

Directory of Open Access Journals (Sweden)

Andrzej FELLNER

2015-12-01

Full Text Available The article presents a summary of current methods used in aviation and rail transport. It also contains a proposal to adjust the method of the FMEA to the latest requirements of the airline industry. The authors suggested tables of indicators Zn, Pr and Dt necessary to implement FMEA method of risk analysis taking into account current achievements aerospace and rail safety. Also proposed acceptable limits of the RPN number which allows you to classify threats.

Common planning of operations of and extensions to a nuclear park and a high-voltage network of a service area with the aid of a modified optimization method of dynamic programming

International Nuclear Information System (INIS)

Bieselt, R.

1974-01-01

While making extensive use of the possibilities dynamic programming as an optimization method has to offer, a planning method for the common operation and the extension of a nuclear park and a high-voltage network for a service area of a large size is worked out in a system-analytical manner in this thesis. With the aid of the computer programmes developed, those decisions concerning construction and operation of power plant and network are looked for which result within appr. 10 years of planning in a minimum of overall generating and transmission costs. (orig./LN) [de

Comparison of three retail data communication and transmission methods

Directory of Open Access Journals (Sweden)

MA Yue

2016-04-01

Full Text Available With the rapid development of retail trade,the type and complexity of data keep increasing,and single data file size has a great difference between each other.How to realize an accurate,real-time and efficient data transmission based on a fixed cost is an important problem.Regarding the problem of effective transmission for business data files,this article implements analysis and comparison on 3 existing data transmission methods,considering the requirements on aspects like function in enterprise data communication system,we get a conclusion that which method can both meet the enterprise daily business development requirement better and have good extension ability.

A Classification of BPEL Extensions

Directory of Open Access Journals (Sweden)

Oliver Kopp

2011-10-01

Full Text Available The Business Process Execution Language (BPEL has emerged as de-facto standard for business processes implementation. This language is designed to be extensible for including additional valuable features in a standardized manner. There are a number of BPEL extensions available. They are, however, neither classified nor evaluated with respect to their compliance to the BPEL standard. This article fills this gap by providing a framework for classifying BPEL extensions, a classification of existing extensions, and a guideline for designing BPEL extensions.

Wall extensibility: its nature, measurement and relationship to plant cell growth

Science.gov (United States)

Cosgrove, D. J.

1993-01-01

Expansive growth of plant cells is controlled principally by processes that loosen the wall and enable it to expand irreversibly. The central role of wall relaxation for cell expansion is reviewed. The most common methods for assessing the extension properties of plant cell walls ( wall extensibility') are described, categorized and assessed critically. What emerges are three fundamentally different approaches which test growing cells for their ability (a) to enlarge at different values of turgor, (b) to induce wall relaxation, and (c) to deform elastically or plastically in response to an applied tensile force. Analogous methods with isolated walls are similarly reviewed. The results of these different assays are related to the nature of plant cell growth and pertinent biophysical theory. I argue that the extensibilities' measured by these assays are fundamentally different from one another and that some are more pertinent to growth than others.

76 FR 66087 - Telecommunications; Extension of the Office of Management and Budget's (OMB) Approval of...

Science.gov (United States)

2011-10-25

...] Telecommunications; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection... the Standard on Telecommunications (29 CFR 1910.268). The purpose of this requirement is to ensure... of the information collection requirement contained in the Standard on Telecommunications (29 CFR...

Expected role of psychologists in rural extension in the Argentine Northeast

Directory of Open Access Journals (Sweden)

Fernando Pablo Landini

2017-05-01

Full Text Available Rural extension is a complex practice that involves the provision of technical assistance and advisory services to farmers and other rural actors with the aim of improving agricultural production as well as organizational and commercial dynamics. Thus, it is clear that rural extension as an interdisciplinary practice that requires contributions from different social sciences. In consequence, it can be argued that psycholog y has a great potential to contribute to rural extension. Nonetheless, it has been mentioned that its contributions to the topic have been scarce. Aiming to understand the potential role of psychologists in the context of rural extension, a qualitative, exploratory-descriptive research was conducted. A total of 40 extensionists from the Argentine northeast provinces were interviewed. Interviews were recorded and latter analyzed following grounded theory’s guidelines and using Atlas Ti software. The findings allow concluding that most rural extensionists consider that psycholog y could contribute to their practice, but without being able to clarify its specificities. Additionally, exten-sionists highlight potential contributions in the area of group dynamics, conflict management and the understanding of farmers’ behavior.

Correlation between extension-block K-wire insertion angle and postoperative extension loss in mallet finger fracture.

Science.gov (United States)

Lee, S K; Kim, Y H; Moon, K H; Choy, W S

2018-02-01

Extension-block pinning represents a simple and reliable surgical technique. Although this procedure is commonly performed successfully, some patients develop postoperative extension loss. To date, the relationship between extension-block Kirschner wire (K-wire) insertion angle and postoperative extension loss in mallet finger fracture remains unclear. We aimed to clarify this relationship and further evaluate how various operative and non-operative factors affect postoperative extension loss after extension-block pinning for mallet finger fracture. A retrospective study was conducted to investigate a relationship between extension block K-wire insertion angle and postoperative extension loss. The inclusion criteria were: (1) a dorsal intra-articular fracture fragment involving 30% of the base of the distal phalanx with or without volar subluxation of the distal phalanx; and (2) block K-wire insertion angle and fixation angle of the distal interphalangeal (DIP) joint were assessed using lateral radiograph at immediate postoperative time. Postoperative extension loss was assessed by using lateral radiograph at latest follow-up. Extension-block K-wire insertion angle was defined as the acute angle between extension block K-wire and longitudinal axis of middle phalangeal head. DIP joint fixation angle was defined as the acute angle between the distal phalanx and middle phalanx longitudinal axes. Seventy-five patients were included. The correlation analysis revealed that extension-block K-wire insertion angle had a negative correlation with postoperative extension loss, whereas fracture size and time to operation had a positive correlation (correlation coefficient for extension block K-wire angle: -0.66, facture size: +0.67, time to operation: +0.60). When stratifying patients in terms of negative and positive fixation angle of the DIP joint, the independent t-test showed that mean postoperative extension loss is -3.67° and +4.54° (DIP joint fixation angles of block

Computer-aided design of control systems to meet many requirements

Science.gov (United States)

Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

1974-01-01

A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

Servant Leadership: Guiding Extension Programs in the 21st Century

Science.gov (United States)

Astroth, Kirk A.; Goodwin, Jeff; Hodnett, Frank

2011-01-01

A new set of leadership skills is required for Extension administrators for the 21st century. Past models and theories are reviewed and discussed. The old "power" model of leadership is no longer relevant. A relatively new model called "Servant Leadership" is reviewed and explained. Seven key practices of servant leadership are outlined, and the…

Capital Requirements and Banks' Leniency

DEFF Research Database (Denmark)

Dietrich, J. Kimball; Wihlborg, Clas

2003-01-01

We investigate the effect of changes in capital regulation on the strictness(leniency) of loan terms using a simple model of bank capital requirements andasset quality examinations. Banks offer different levels of `leniency' in the senseof willingness to offer automatic extensions of loans...... rates. As capital requirements increase thedifference between initial capital levels and between interest rates of strict andlenient banks decrease. Thus, higher capital requirements in recessions tend toreduce the interest rate premium paid for leniency. If a recession is interpreted asan increase...... in the required return, the interest rate premium paid for leniency isincreased in recession at a given level of required capital....

7 CFR 277.11 - Financial reporting requirements.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Financial reporting requirements. 277.11 Section 277... OF STATE AGENCIES § 277.11 Financial reporting requirements. (a) General. This section prescribes... termination of Federal financial support. Requests from State agencies for extension of reporting due dates...

iPads and Tablets: Today’s Extension Demonstration

Directory of Open Access Journals (Sweden)

Nancy Franz

2013-06-01

Full Text Available Iowa State University Extension and Outreach educators are using iPadsto deepen and expand education by showing learners online resources on nutrition including signing up for blogs and visiting our Spend Smart Eat Smart website and Facebook page. A video describing the project is available at http://vimeo.com/64757580. Of the 281 learners who responded to a survey, 96% learned additional nutrition information outside of our classes from the Spend Smart Eat Smart Facebook page, blog, and website; 93% learned about nutrition practices; and 88% learned about food resource management practices. Educators are also using the video clips on our websites as demonstrations during lessons. The educators no longer carry demonstration supplies, and learners return to the video demonstrations outside of class. The “Extension demonstration” as a delivery method still has strong impact, but now resides in the two-dimensional world of the internet brought to learners through mobile devices. Long live the Extension demonstration!

Design requirements, criteria and methods for seismic qualification of CANDU power plants

International Nuclear Information System (INIS)

Singh, N.; Duff, C.G.

1979-10-01

This report describes the requirements and criteria for the seismic design and qualification of systems and equipment in CANDU nuclear power plants. Acceptable methods and techniques for seismic qualification of CANDU nuclear power plants to mitigate the effects or the consequences of earthquakes are also described. (auth)

Extension through Partnerships: Research and Education Center Teams with County Extension to Deliver Programs

Science.gov (United States)

Mullahey, J. Jeffrey

2011-01-01

Budget reductions have severely affected resources available to deliver agriculture and natural resource Extension programs in Florida. University of Florida/Institute of Food and Agricultural Sciences delivers Extension programming through a unique partnership between research and education centers and county Extension. Science-based information…

Extension plant pathology: strengthening resources to continue serving the public interest.

Science.gov (United States)

Everts, K L; Osborne, L; Gevens, A J; Vasquez, S J; Gugino, B K; Ivors, K; Harmon, C

2012-07-01

Extension plant pathologists deliver science-based information that protects the economic value of agricultural and horticultural crops in the United States by educating growers and the general public about plant diseases. Extension plant pathologists diagnose plant diseases and disorders, provide advice, and conduct applied research on local and regional plant disease problems. During the last century, extension plant pathology programs have adjusted to demographic shifts in the U.S. population and to changes in program funding. Extension programs are now more collaborative and more specialized in response to a highly educated clientele. Changes in federal and state budgets and policies have also reduced funding and shifted the source of funding of extension plant pathologists from formula funds towards specialized competitive grants. These competitive grants often favor national over local and regional plant disease issues and typically require a long lead time to secure funding. These changes coupled with a reduction in personnel pose a threat to extension plant pathology programs. Increasing demand for high-quality, unbiased information and the continued reduction in local, state, and federal funds is unsustainable and, if not abated, will lead to a delay in response to emerging diseases, reduce crop yields, increase economic losses, and place U.S. agriculture at a global competitive disadvantage. In this letter, we outline four recommendations to strengthen the role and resources of extension plant pathologists as they guide our nation's food, feed, fuel, fiber, and ornamental producers into an era of increasing technological complexity and global competitiveness.

Surgical approach to extensive hidradenitis suppurativa in the perineal/perianal and gluteal regions.

Science.gov (United States)

Balik, Emre; Eren, Tunc; Bulut, Türker; Büyükuncu, Yilmaz; Bugra, Dursun; Yamaner, Sümer

2009-03-01

spread of the malignancy. At the end of a 5-year mean follow-up period, all remaining patients had no evidence of disease. Conservative treatment methods have little or no effect on extensive perineal/perianal hidradenitis suppurativa. Therefore, total surgical excision must be considered for these patients to prevent further complications, such as abscess, sinus tract formation, fistulization, and scarring. A temporary stoma may be needed in some cases. Because wound management after total excision is performed via different methods according to each individual patient, multidisciplinary team work is necessary and the patients often require a long hospital stay. If the treatment is not performed in an appropriate manner or if the patients are not followed closely until definitive healing, recurrence is almost inevitable. Despite the low incidence of accompanying squamous cell carcinoma, it is the most serious complication. We evaluated 15 patients to present our experience with extensive perineal/perianal and gluteal hidradenitis suppurativa.

Extensions of von Neumann's method for generating random variables

International Nuclear Information System (INIS)

Monahan, J.F.

1979-01-01

Von Neumann's method of generating random variables with the exponential distribution and Forsythe's method for obtaining distributions with densities of the form e/sup -G//sup( x/) are generalized to apply to certain power series representations. The flexibility of the power series methods is illustrated by algorithms for the Cauchy and geometric distributions

Risk-adapted monitoring is not inferior to extensive on-site monitoring: Results of the ADAMON cluster-randomised study.

Science.gov (United States)

Brosteanu, Oana; Schwarz, Gabriele; Houben, Peggy; Paulus, Ursula; Strenge-Hesse, Anke; Zettelmeyer, Ulrike; Schneider, Anja; Hasenclever, Dirk

2017-12-01

Background According to Good Clinical Practice, clinical trials must protect rights and safety of patients and make sure that the trial results are valid and interpretable. Monitoring on-site has an important role in achieving these objectives; it controls trial conduct at trial sites and informs the sponsor on systematic problems. In the past, extensive on-site monitoring with a particular focus on formal source data verification often lost sight of systematic problems in study procedures that endanger Good Clinical Practice objectives. ADAMON is a prospective, stratified, cluster-randomised, controlled study comparing extensive on-site monitoring with risk-adapted monitoring according to a previously published approach. Methods In all, 213 sites from 11 academic trials were cluster-randomised between extensive on-site monitoring (104) and risk-adapted monitoring (109). Independent post-trial audits using structured manuals were performed to determine the frequency of major Good Clinical Practice findings at the patient level. The primary outcome measure is the proportion of audited patients with at least one major audit finding. Analysis relies on logistic regression incorporating trial and monitoring arm as fixed effects and site as random effect. The hypothesis was that risk-adapted monitoring is non-inferior to extensive on-site monitoring with a non-inferiority margin of 0.60 (logit scale). Results Average number of monitoring visits and time spent on-site was 2.1 and 2.7 times higher in extensive on-site monitoring than in risk-adapted monitoring, respectively. A total of 156 (extensive on-site monitoring: 76; risk-adapted monitoring: 80) sites were audited. In 996 of 1618 audited patients, a total of 2456 major audit findings were documented. Depending on the trial, findings were identified in 18%-99% of the audited patients, with no marked monitoring effect in any of the trials. The estimated monitoring effect is -0.04 on the logit scale with two-sided 95

Can intraductal ultrasonography (IDUS) predicting the longitudinal extension of intraductal papillary mucinous tumor (IPMT) of the pancreas?

International Nuclear Information System (INIS)

Cho, Young Deok; Jang, Jae Young; Cheon, Young Koog; Moon, Jung Ho; Kim, Yun Soo; Lee, Moon Sung; Hur, Kyung Yul; Shim, Chan Sup

2002-01-01

The treatment of the choice of IPMT is a partial pancreatic resection with complete excision of this potentially malignant lesion, thus preserving sufficient pancreatic tissue to ensure endocrine and exocrine functions. This strategy, however, requires a reliable preoperative assessment of the highly variable extension of IPMT. We performed this study to determine the role of intraductal ultrasonography (IDUS) in predicting extension of IPMT and selecting the resection methods of pancreas. From January 1997 to August 2001, there were 12 consequent patients, including 5 men and 7 women, with a median age of 54 years (range, 37-66) who underwent a resection of IPMT. A preoperative assessment of IPMT by IDUS was performed in all patients. According to the preoperative localization of IPMT by IDUS, various type of limited pancreatic resections were planned. The frozen sectional histologic examination of pancreatic cut surface was performed in all patient. In the case of cut surface tumor positive, a modification of the planned resection was done.

Extension as expression of social responsibility for higher education

Directory of Open Access Journals (Sweden)

Ricardo Antonio de Marco

2016-05-01

Full Text Available The National System of Higher Education Assessment 2004 in Axis 2, Institutional Development and its dimensions 1 and 3: Mission and Institutional Development Plan (IDP and the Social Responsibility of the institution highlights the need for universities to incorporate in their activities teaching, research and extension practices that demonstrate their positive involvement in social development. In this sense, this article aims to evaluate the practice of university extension contributes to the consolidation of University Social Responsibility. was used as a method descriptive research and documentary analysis found that the institutional documents of the University of the West of Santa Catarina: mission, vision and values; Institutional Development Plan and the extension project of the University of Chapecó Best Age (UMIC; and the National System of Higher Education Evaluation. From this inference, it was revealed that UNOESC in its constitutive principles and official documents value-oriented civic education for social inclusion. It was found that the consolidation of MSW necessarily involves watchful eye of management to the principles of indivisibility of teaching, research and extension, components and ended the universities, which when not properly executed, counter and violate the legal provision; that inter- and transdisciplinary nature of extension projects, such as UMIC, have strong contribution to the consolidation of MSW; parallel, left clear that isolation Extension projects like UMIC not reach the fullness of the social commitment of universities, suggesting that inseparability is present with the incorporation of actions that promote social development.

A feasible DY conjugate gradient method for linear equality constraints

Science.gov (United States)

LI, Can

2017-09-01

In this paper, we propose a feasible conjugate gradient method for solving linear equality constrained optimization problem. The method is an extension of the Dai-Yuan conjugate gradient method proposed by Dai and Yuan to linear equality constrained optimization problem. It can be applied to solve large linear equality constrained problem due to lower storage requirement. An attractive property of the method is that the generated direction is always feasible and descent direction. Under mild conditions, the global convergence of the proposed method with exact line search is established. Numerical experiments are also given which show the efficiency of the method.

Application and Assessment of Extension of Time Claim: Findings of Case Studies Conducted in Malaysia

Directory of Open Access Journals (Sweden)

M.S. Mohd Danuri,

2006-12-01

Full Text Available It is a common phenomenon for construction projects to have applications for extension of time. Many problems are encountered in practice in the application and preparation of extension of time claims. A study was conducted to identify the main problems encountered in the application and assessment of extension of time claim in selected construction projects in Malaysia. Three (3 case studies have been used 10 investigate the extension of time issues. Findings from the study revealed that local contractors usually fail to comply with the contract procedural requirements to submit timely notification of delay and have difficulty in demonstrating their entitlement for extension of time. The main problem faced by contract administrators is that contractors tend to "inflate" their extension of time entitlement with the intention to maximise their claims. Adherence to the agreed procedure in preparing and evaluating of delay claims and the implementation of a set of agreed standardised delay analysis may help to minimize the frequency and impact of such problems.

Creating and Implementing Diverse Development Strategies to Support Extension Centers and Programs

Science.gov (United States)

Page, Christopher S.; Kern, Michael A.

2018-01-01

Declining government funding for higher education requires colleges and universities to seek alternative revenue streams, including through philanthropic fund-raising. Extension-based subject matter centers and other programs can benefit from the thoughtful supplementation of traditional revenue sources with individual, corporate, and private…

Calculations of pair production by Monte Carlo methods

International Nuclear Information System (INIS)

Bottcher, C.; Strayer, M.R.

1991-01-01

We describe some of the technical design issues associated with the production of particle-antiparticle pairs in very large accelerators. To answer these questions requires extensive calculation of Feynman diagrams, in effect multi-dimensional integrals, which we evaluate by Monte Carlo methods on a variety of supercomputers. We present some portable algorithms for generating random numbers on vector and parallel architecture machines. 12 refs., 14 figs

Nuclear unit life extension: technico-economic considerations

International Nuclear Information System (INIS)

Bertron, L.

1987-01-01

The outstanding place of PWR power plants among the overall power generating facilities indicates the need for particular attention to be paid to assessing their expected useful life. The more so as they are not, in the medium term, exposed to the risk of becoming financially absolute which might result from more efficient generating tools entering the market. Yet, in no case should plant life extension affect safety in operation. This makes it necessary to ascertain and produce evidence that the various items of equipment remain equal to their function in terms of safety. Components ageing problems should be steadily monitored and ageing indicators adopted, allowing decisions of refurbishing or replacement to be made to avert plant shutdown. The alternative between repair works or shutdown will possibly arise in the case of heavy equipment likely to require protracted repairs and intricate works in radioactive environment. A technico-economic study, making allowance for anticipated savings in life extension through replacement operations, should help make the most appropriate decision [fr

A Moodle extension to book online labs

Directory of Open Access Journals (Sweden)

Antonio C. Cardoso

2005-11-01

Full Text Available The social constructivist philosophy of Moodle makes it an excellent choice to deliver e-learning contents that require collaborative activities, such as those that are associated with online labs. In the case of online labs that enable web access to real devices (remote workbenches, access time should be reserved beforehand. A booking tool will avoid access conflicts and at the same time will help the students to organise their time and activities. This paper presents a Moodle extension that was developed within the Leonardo da Vinci MARVEL project, with the objective of meeting this requirement. The booking tool presented enables resource sharing in general and may be used to organise access to any type of scarce resources, such as to online labs and to the videoconferencing rooms that are needed to support collaborative activities.

Quantitative analysis on the urban flood mitigation effect by the extensive green roof system.

Science.gov (United States)

Lee, J Y; Moon, H J; Kim, T I; Kim, H W; Han, M Y

2013-10-01

Extensive green-roof systems are expected to have a synergetic effect in mitigating urban runoff, decreasing temperature and supplying water to a building. Mitigation of runoff through rainwater retention requires the effective design of a green-roof catchment. This study identified how to improve building runoff mitigation through quantitative analysis of an extensive green-roof system. Quantitative analysis of green-roof runoff characteristics indicated that the extensive green roof has a high water-retaining capacity response to rainfall of less than 20 mm/h. As the rainfall intensity increased, the water-retaining capacity decreased. The catchment efficiency of an extensive green roof ranged from 0.44 to 0.52, indicating reduced runoff comparing with efficiency of 0.9 for a concrete roof. Therefore, extensive green roofs are an effective storm water best-management practice and the proposed parameters can be applied to an algorithm for rainwater-harvesting tank design. © 2013 Elsevier Ltd. All rights reserved.

Shelf life extension of ground beef by radurization

International Nuclear Information System (INIS)

Holzapfel, W.H.; Niemand, J.G.

1982-01-01

Radurization was investigated as a technique in the shelf life extension of ground beef. Although radurization does not necessarily kill off all meat spoilage bacteria, this process may be used for extending the bacteriological keeping quality of fresh meat. The materials and methods used in the investigation are also discussed

EXTENSIVE KNOWLEDGE IN FASHION TRENDS FOR SPRING/SUMMER 2013

OpenAIRE

Alexandra Mocenco; Sabina Olaru; Georgeta Popescu

2013-01-01

Globally there is mobility market and a manufacturers orientation to innovative products of small series or personalized. Adaptability and compliance with these fashion trends subordinate to client requirements is the key to developing big consumer brands known worldwide. Product design and development based extensive knowledge in fashion trends are extremely important capabilities for companies in the garment industry. Aligning economic agents to flexibility, mobility and speed of change in ...

Solving Fuzzy Fractional Differential Equations Using Zadeh's Extension Principle

Science.gov (United States)

Ahmad, M. Z.; Hasan, M. K.; Abbasbandy, S.

2013-01-01

We study a fuzzy fractional differential equation (FFDE) and present its solution using Zadeh's extension principle. The proposed study extends the case of fuzzy differential equations of integer order. We also propose a numerical method to approximate the solution of FFDEs. To solve nonlinear problems, the proposed numerical method is then incorporated into an unconstrained optimisation technique. Several numerical examples are provided. PMID:24082853

RURAL EXTENSION EPISTEMOLOGY AND THE TIME OF TOTAL EXTENSION

Directory of Open Access Journals (Sweden)

Silvio Calgaro Neto

2016-09-01

Full Text Available This article is dedicated to explore the field of knowledge related to rural extension. In general, a three complementary perspective is used as theoretical strategy to present this epistemological study. The first perspective, seeks to accomplish a brief archeology of rural extension, identifying the remarkable historical passages. At the second, we look to some theoretical models through the modern epistemological platform. Finally, the third perspective, aims to present a methodological proposal that contemplate this epistemic characteristics, relating with the contemporary transformations observed in the knowledge construction and technological transference for a rural development. Keywords: Total institutions. University.

New concepts, requirements and methods concerning the periodic inspection of the CANDU fuel channels

International Nuclear Information System (INIS)

Denis, J.R.

1995-01-01

Periodic inspection of fuel channels is essential for a proper assessment of the structural integrity of these vital components of the reactor. The development of wet channel technologies for non-destructive examination (NDE) of pressure tubes and the high technical performance and reliability of the CIGAR equipment have led, in less than 1 0 years, to the accumulation of a very significant volume of data concerning the flaw mechanisms and structural behaviour of the CANDU fuel channels. On this basis, a new form of the CAN/CSA-N285.4 Standard for Periodic Inspection of CANDU Nuclear Power Plant components was elaborated, introducing new concepts and requirements, in accord with the powerful NDE methods now available. This paper presents these concepts and requirements, and discusses the NDE methods, presently used or under development, to satisfy these requirements. Specific features regarding the fuel channel inspections of Cernavoda NGS Unit 1 are also discussed. (author)

Cognition and procedure representational requirements for predictive human performance models

Science.gov (United States)

Corker, K.

1992-01-01

Models and modeling environments for human performance are becoming significant contributors to early system design and analysis procedures. Issues of levels of automation, physical environment, informational environment, and manning requirements are being addressed by such man/machine analysis systems. The research reported here investigates the close interaction between models of human cognition and models that described procedural performance. We describe a methodology for the decomposition of aircrew procedures that supports interaction with models of cognition on the basis of procedures observed; that serves to identify cockpit/avionics information sources and crew information requirements; and that provides the structure to support methods for function allocation among crew and aiding systems. Our approach is to develop an object-oriented, modular, executable software representation of the aircrew, the aircraft, and the procedures necessary to satisfy flight-phase goals. We then encode in a time-based language, taxonomies of the conceptual, relational, and procedural constraints among the cockpit avionics and control system and the aircrew. We have designed and implemented a goals/procedures hierarchic representation sufficient to describe procedural flow in the cockpit. We then execute the procedural representation in simulation software and calculate the values of the flight instruments, aircraft state variables and crew resources using the constraints available from the relationship taxonomies. The system provides a flexible, extensible, manipulative and executable representation of aircrew and procedures that is generally applicable to crew/procedure task-analysis. The representation supports developed methods of intent inference, and is extensible to include issues of information requirements and functional allocation. We are attempting to link the procedural representation to models of cognitive functions to establish several intent inference methods

Contributions to robust methods of creep analysis

International Nuclear Information System (INIS)

Penny, B.K.

1991-01-01

Robust methods for the predictions of deformations and lifetimes of components operating in the creep range are presented. The ingredients used for this are well-tried numerical techniques combined with the concepts of continuum damage and so-called reference stresses. The methods described are derived in order to obtain the maximum benefit during the early stages of design where broad assessments of the influences of material choice, loadings and geometry need to be made quickly and with economical use of computers. It is also intended that the same methods will be of value during operation if estimates of damage or if exercises in life extension or inspection timing are required. (orig.)

The ‘SAR Matrix’ method and its extensions for applications in medicinal chemistry and chemogenomics [v1; ref status: indexed, http://f1000r.es/3gh

Directory of Open Access Journals (Sweden)

Disha Gupta-Ostermann

2014-05-01

Full Text Available We describe the ‘Structure-Activity Relationship (SAR Matrix’ (SARM methodology that is based upon a special two-step application of the matched molecular pair (MMP formalism. The SARM method has originally been designed for the extraction, organization, and visualization of compound series and associated SAR information from compound data sets. It has been further developed and adapted for other applications including compound design, activity prediction, library extension, and the navigation of multi-target activity spaces. The SARM approach and its extensions are presented here in context to introduce different types of applications and provide an example for the evolution of a computational methodology in pharmaceutical research.

The ‘SAR Matrix’ method and its extensions for applications in medicinal chemistry and chemogenomics [v2; ref status: indexed, http://f1000r.es/3rg

Directory of Open Access Journals (Sweden)

Disha Gupta-Ostermann

2014-06-01

Full Text Available We describe the ‘Structure-Activity Relationship (SAR Matrix’ (SARM methodology that is based upon a special two-step application of the matched molecular pair (MMP formalism. The SARM method has originally been designed for the extraction, organization, and visualization of compound series and associated SAR information from compound data sets. It has been further developed and adapted for other applications including compound design, activity prediction, library extension, and the navigation of multi-target activity spaces. The SARM approach and its extensions are presented here in context to introduce different types of applications and provide an example for the evolution of a computational methodology in pharmaceutical research.

77 FR 70828 - Proposed Extension of Information Collection Requests Submitted for Public Comment

Science.gov (United States)

2012-11-27

... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information Collection Requests Submitted for Public Comment AGENCY: Employee Benefits Security Administration... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

78 FR 30333 - Proposed Extension of Information Collection Requests Submitted for Public Comment

Science.gov (United States)

2013-05-22

... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information Collection Requests Submitted for Public Comment AGENCY: Employee Benefits Security Administration... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

SAFAX - An Extensible Authorization Service for Cloud Environments

Directory of Open Access Journals (Sweden)

Samuel Paul Kaluvuri

2015-05-01

Full Text Available Cloud storage services have become increasingly popular in recent years. Users are often registered to multiple cloud storage services that suit different needs. However, the ad-hoc manner in which data sharing between users is implemented leads to issues for these users. For instance, users are required to define different access control policies for each cloud service they use and are responsible for synchronizing their policies across different cloud providers. Users do not have access to a uniform and expressive method to deal with authorization. Current authorization solutions cannot be applied as-is, since they cannot cope with challenges specific to cloud environments. In this paper, we analyze the challenges of data sharing in multi-cloud environments and propose SAFAX, an XACML based authorization service designed to address these challenges. SAFAX's architecture allows users to deploy their access control policies in a standard format, in a single location, and augment policy evaluation with information from user selectable external trust services. We describe the architecture of SAFAX, a prototype implementation based on this architecture, illustrate the extensibility through external trust services and discuss the benefits of using SAFAX from both the user's and cloud provider's perspectives.

Subring Depth, Frobenius Extensions, and Towers

Directory of Open Access Journals (Sweden)

Lars Kadison

2012-01-01

Full Text Available The minimum depth d(B,A of a subring B⊆A introduced in the work of Boltje, Danz and Külshammer (2011 is studied and compared with the tower depth of a Frobenius extension. We show that d(B,A < ∞ if A is a finite-dimensional algebra and Be has finite representation type. Some conditions in terms of depth and QF property are given that ensure that the modular function of a Hopf algebra restricts to the modular function of a Hopf subalgebra. If A⊇B is a QF extension, minimum left and right even subring depths are shown to coincide. If A⊇B is a Frobenius extension with surjective Frobenius, homomorphism, its subring depth is shown to coincide with its tower depth. Formulas for the ring, module, Frobenius and Temperley-Lieb structures are noted for the tower over a Frobenius extension in its realization as tensor powers. A depth 3 QF extension is embedded in a depth 2 QF extension; in turn certain depth n extensions embed in depth 3 extensions if they are Frobenius extensions or other special ring extensions with ring structures on their relative Hochschild bar resolution groups.

77 FR 74225 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2012-12-13

... proposal to extend Office of Management and Budget (OMB) approval of the Information Collection: Work-Study... reporting requirements that include a Work Study Program application and written participation agreement. In... private school system to file with the Wage and Hour Division Administrator an application for approval of...

78 FR 9865 - Air Carrier Contract Maintenance Requirements; Extension of Comment Period

Science.gov (United States)

2013-02-12

.... FAA-2011-1136; Notice No. 12-07] RIN 2120-AJ33 Air Carrier Contract Maintenance Requirements... performing contract maintenance that are acceptable to the FAA and to include them in their maintenance... contract their maintenance. At the behest of several of their FAA-certificated air carrier members...

Dettol: Managing Brand Extensions

OpenAIRE

Anand Kumar Jaiswal; Arpita Srivastav; Dhwani Kothari

2009-01-01

This case is about evolution of a parent brand and its subsequent extensions into different product categories. Dettol as a brand has immense trust and loyalty from the consumers. Since the 1930s when Dettol was introduced in India, it has occupied a distinct position in the mind of its consumers. To achieve fast growth and leverage the strong brand equity of Dettol, Reckitt Benckiser India Limited (RBIL) rolled out a number of brand extensions. Some of these extensions such as Dettol soap an...

An extensive allelic series of Drosophila kae1 mutants reveals diverse and tissue-specific requirements for t6A biogenesis

Science.gov (United States)

Lin, Ching-Jung; Smibert, Peter; Zhao, Xiaoyu; Hu, Jennifer F.; Ramroop, Johnny; Kellner, Stefanie M.; Benton, Matthew A.; Govind, Shubha; Dedon, Peter C.; Sternglanz, Rolf; Lai, Eric C.

2015-01-01

N6-threonylcarbamoyl-adenosine (t6A) is one of the few RNA modifications that is universally present in life. This modification occurs at high frequency at position 37 of most tRNAs that decode ANN codons, and stabilizes cognate anticodon–codon interactions. Nearly all genetic studies of the t6A pathway have focused on single-celled organisms. In this study, we report the isolation of an extensive allelic series in the Drosophila ortholog of the core t6A biosynthesis factor Kae1. kae1 hemizygous larvae exhibit decreases in t6A that correlate with allele strength; however, we still detect substantial t6A-modified tRNAs even during the extended larval phase of null alleles. Nevertheless, complementation of Drosophila Kae1 and other t6A factors in corresponding yeast null mutants demonstrates that these metazoan genes execute t6A synthesis. Turning to the biological consequences of t6A loss, we characterize prominent kae1 melanotic masses and show that they are associated with lymph gland overgrowth and ectopic generation of lamellocytes. On the other hand, kae1 mutants exhibit other phenotypes that reflect insufficient tissue growth. Interestingly, whole-tissue and clonal analyses show that strongly mitotic tissues such as imaginal discs are exquisitely sensitive to loss of kae1, whereas nonproliferating tissues are less affected. Indeed, despite overt requirements of t6A for growth of many tissues, certain strong kae1 alleles achieve and sustain enlarged body size during their extended larval phase. Our studies highlight tissue-specific requirements of the t6A pathway in a metazoan context and provide insights into the diverse biological roles of this fundamental RNA modification during animal development and disease. PMID:26516084

Extensively Drug-Resistant Tuberculosis: Principles of Resistance, Diagnosis, and Management.

Science.gov (United States)

Wilson, John W; Tsukayama, Dean T

2016-04-01

Extensively drug-resistant (XDR) tuberculosis (TB) is an unfortunate by-product of mankind's medical and pharmaceutical ingenuity during the past 60 years. Although new drug developments have enabled TB to be more readily curable, inappropriate TB management has led to the emergence of drug-resistant disease. Extensively drug-resistant TB describes Mycobacterium tuberculosis that is collectively resistant to isoniazid, rifampin, a fluoroquinolone, and an injectable agent. It proliferates when established case management and infection control procedures are not followed. Optimized treatment outcomes necessitate time-sensitive diagnoses, along with expanded combinations and prolonged durations of antimicrobial drug therapy. The challenges to public health institutions are immense and most noteworthy in underresourced communities and in patients coinfected with human immunodeficiency virus. A comprehensive and multidisciplinary case management approach is required to optimize outcomes. We review the principles of TB drug resistance and the risk factors, diagnosis, and managerial approaches for extensively drug-resistant TB. Treatment outcomes, cost, and unresolved medical issues are also discussed. Copyright © 2016 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

The generation of chromosomal deletions to provide extensive coverage and subdivision of the Drosophila melanogaster genome.

Science.gov (United States)

Cook, R Kimberley; Christensen, Stacey J; Deal, Jennifer A; Coburn, Rachel A; Deal, Megan E; Gresens, Jill M; Kaufman, Thomas C; Cook, Kevin R

2012-01-01

Chromosomal deletions are used extensively in Drosophila melanogaster genetics research. Deletion mapping is the primary method used for fine-scale gene localization. Effective and efficient deletion mapping requires both extensive genomic coverage and a high density of molecularly defined breakpoints across the genome. A large-scale resource development project at the Bloomington Drosophila Stock Center has improved the choice of deletions beyond that provided by previous projects. FLP-mediated recombination between FRT-bearing transposon insertions was used to generate deletions, because it is efficient and provides single-nucleotide resolution in planning deletion screens. The 793 deletions generated pushed coverage of the euchromatic genome to 98.4%. Gaps in coverage contain haplolethal and haplosterile genes, but the sizes of these gaps were minimized by flanking these genes as closely as possible with deletions. In improving coverage, a complete inventory of haplolethal and haplosterile genes was generated and extensive information on other haploinsufficient genes was compiled. To aid mapping experiments, a subset of deletions was organized into a Deficiency Kit to provide maximal coverage efficiently. To improve the resolution of deletion mapping, screens were planned to distribute deletion breakpoints evenly across the genome. The median chromosomal interval between breakpoints now contains only nine genes and 377 intervals contain only single genes. Drosophila melanogaster now has the most extensive genomic deletion coverage and breakpoint subdivision as well as the most comprehensive inventory of haploinsufficient genes of any multicellular organism. The improved selection of chromosomal deletion strains will be useful to nearly all Drosophila researchers.

Learning investment indicators through data extension

Science.gov (United States)

Dvořák, Marek

2017-07-01

Stock prices in the form of time series were analysed using single and multivariate statistical methods. After simple data preprocessing in the form of logarithmic differences, we augmented this single variate time series to a multivariate representation. This method makes use of sliding windows to calculate several dozen of new variables using simple statistic tools like first and second moments as well as more complicated statistic, like auto-regression coefficients and residual analysis, followed by an optional quadratic transformation that was further used for data extension. These were used as a explanatory variables in a regularized logistic LASSO regression which tried to estimate Buy-Sell Index (BSI) from real stock market data.

Robotic hand with modular extensions

Science.gov (United States)

Salisbury, Curt Michael; Quigley, Morgan

2015-01-20

A robotic device is described herein. The robotic device includes a frame that comprises a plurality of receiving regions that are configured to receive a respective plurality of modular robotic extensions. The modular robotic extensions are removably attachable to the frame at the respective receiving regions by way of respective mechanical fuses. Each mechanical fuse is configured to trip when a respective modular robotic extension experiences a predefined load condition, such that the respective modular robotic extension detaches from the frame when the load condition is met.

Dense Output for Strong Stability Preserving Runge–Kutta Methods

KAUST Repository

Ketcheson, David I.

2016-12-10

We investigate dense output formulae (also known as continuous extensions) for strong stability preserving (SSP) Runge–Kutta methods. We require that the dense output formula also possess the SSP property, ideally under the same step-size restriction as the method itself. A general recipe for first-order SSP dense output formulae for SSP methods is given, and second-order dense output formulae for several optimal SSP methods are developed. It is shown that SSP dense output formulae of order three and higher do not exist, and that in any method possessing a second-order SSP dense output, the coefficient matrix A has a zero row.

3-D extension C5G7 MOX benchmark calculation using threedant code

International Nuclear Information System (INIS)

Kim, H.Ch.; Han, Ch.Y.; Kim, J.K.; Na, B.Ch.

2005-01-01

It pursued the benchmark on deterministic 3-D MOX fuel assembly transport calculations without spatial homogenization (C5G7 MOX Benchmark Extension). The goal of this benchmark is to provide a more through test results for the abilities of current available 3-D methods to handle the spatial heterogeneities of reactor core. The benchmark requires solutions in the form of normalized pin powers as well as the eigenvalue for each of the control rod configurations; without rod, with A rods, and with B rods. In this work, the DANTSYS code package was applied to analyze the 3-D Extension C5G7 MOX Benchmark problems. The THREEDANT code within the DANTSYS code package, which solves the 3-D transport equation in x-y-z, and r-z-theta geometries, was employed to perform the benchmark calculations. To analyze the benchmark with the THREEDANT code, proper spatial and angular approximations were made. Several calculations were performed to investigate the effects of the different spatial approximations on the accuracy. The results from these sensitivity studies were analyzed and discussed. From the results, it is found that the 4*4 grid per pin cell is sufficiently refined so that very little benefit is obtained by increasing the mesh size. (authors)

Improving the Efficiency of the Nodal Integral Method With the Portable, Extensible Tool-kit for Scientific Computation

International Nuclear Information System (INIS)

Toreja, Allen J.; Uddin, Rizwan

2002-01-01

An existing implementation of the nodal integral method for the time-dependent convection-diffusion equation is modified to incorporate various PETSc (Portable, Extensible Tool-kit for Scientific Computation) solver and pre-conditioner routines. In the modified implementation, the default iterative Gauss-Seidel solver is replaced with one of the following PETSc iterative linear solver routines: Generalized Minimal Residuals, Stabilized Bi-conjugate Gradients, or Transpose-Free Quasi-Minimal Residuals. For each solver, a Jacobi or a Successive Over-Relaxation pre-conditioner is used. Two sample problems, one with a low Peclet number and one with a high Peclet number, are solved using the new implementation. In all the cases tested, the new implementation with the PETSc solver routines outperforms the original Gauss-Seidel implementation. Moreover, the PETSc Stabilized Bi-conjugate Gradients routine performs the best on the two sample problems leading to CPU times that are less than half the CPU times of the original implementation. (authors)

What extension evaluation before therapy have we to do in the nasopharynx cancers?

International Nuclear Information System (INIS)

Elloumi, F.; Mnejja, W.; Siala, W.; Daoud, J.; Hammami, B.; Ghorbel, M.; Frikhan, M.

2007-01-01

NMR imaging has proved its superiority on scanography in the study of limits and tumor extension and should be the first examination. The practice of of a scanography or cervical NMR should be the best mean of ganglions evaluation. As regards the extension evaluation at distance, it is recommended to require systematically a thorax radiograph and a bone scintigraphy for any patient. The liver echography is rather indicated among male patients, aged between 40 and 45 and having a stage 3 lymph node (according to the U.I.C.C. 1997 classification). (N.C.)

Journal of Agricultural Extension submitted to Agricultural Extension ...

African Journals Online (AJOL)

PROF. MADUKWE

... typically confront narrower range of labour markets than men, and lower wage ... capabilities of women and by extension the household, female household ..... gap in accessibility to productive resources between male and female heads of.

76 FR 60086 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2011-09-28

... employee of the reasons for the designation and for the disagreement. Covered employers with no eligible...), 29 U.S.C. 2601, et seq., requires private sector employers who employ 50 or more employees, all...-protected leave during any 12-month period to eligible employees for certain family and medical reasons (i.e...

The Effects of Leader-Member Exchanges on the Relationships Between Extension Agents and County Extension Directors in Florida

Directory of Open Access Journals (Sweden)

Matt Benge

2017-03-01

Full Text Available The relationship between a supervisor and employee has a direct effect on the employee’s job satisfaction, work productivity, and efficiency. Understanding the interactions between Extension agents and County Extension Directors is critical to maintaining positive relationships and providing adequate support to Extension supervisors through professional development and training opportunities. This article examined the dyadic relationships between Extension agents and County Extension Directors in Florida. The majority of Florida Extension agents have high-quality relationship with their County Extension Directors. In addition, over half of relationships of five years or less are in the partner phase, suggesting new employees of the Florida Cooperative Extension Service progress through the leadership making process in a relatively short amount of time. UF/IFAS Extension Administration should provide increased leadership training for County Extension Directors to ensure all dyads progress through the leadership-making process to the partner phase, such as relationship building, and management and supervisory training.

System, economy and ecology viewpoints of the Krsko NPP lifetime extension

International Nuclear Information System (INIS)

Novsak, M.; Spiler, J.; Zagar, T.; Pirs, B.; Bole, A.; Bregar, Z.; Cuhalev, I.; Derganc, B.; Ivanjko, S.; Matvoz, D.; Sustersic, A.; Valencic, L.; Zabric, I.; Zlatarev, G.; Babuder, M.

2007-01-01

Krsko NPP plant life extension was analysed and evaluated with respect to system, economy and ecology viewpoints. From the system perspective it was established that also in the extended lifetime the plant will remain in operation as a base load electricity supplier. The systematic review was performed to determine its overall competitiveness against advanced coal, gas and new nuclear units. The analysis considered also hydro and renewable sources. Analysis and evaluations resulted in the conclusion that the Krsko NPP lifetime extension is the most effective alternative for base load production due to small additional capital investments, low fuel costs, no new siting requirements, lowest climate and environmental impact, and reliable and safe operation. (author)

Factors affecting the longevity of interim ILW stores, monitoring methods and techniques supporting store life extension - 59151

International Nuclear Information System (INIS)

Morris, Jenny; Wickham, Stephen; Hicks, Tim; Richardson, Phil; McKinney, James; Morris, Darrell; Brownridge, Melanie; Tearle, Mark

2012-01-01

Life-limiting features of stores (i.e. components of a typical Intermediate Level Waste (ILW) store that are vulnerable to failure) can be separated into those related to store design, the continuing operation of the store and equipment and store management. Environmental factors, including temperature, humidity, atmospheric pollutants and radiation fields also affect the longevity of ILW storage buildings and the integrity of the waste packages within the store. The current condition of the store and the causes and rates of any observed deterioration need to be determined to estimate the current operating life of the store and to analyse the costs and benefits associated with life extension. Suitable monitoring techniques and methods for extending the operating life of stores, either by remediation or replacement of identified life-limiting features, have also been assessed. Techniques including visual inspection (directly or by use of CCTV or inspection cells), corrosion coupons, crane monitoring and a wide range of indirect measurement methods can be used to monitor the condition of life-limiting features and the store environment. Methods for extending store life include the application of paint or coatings to retard degradation, use of electro-chemical treatments and repair of the concrete structure or replacement of components. Life-limiting features and environmental factors that affect the longevity of facilities for the interim storage of ILW have been identified through a literature review and Expert Workshop. Monitoring techniques are available for the key life-limiting feature of structural integrity of reinforced concrete, and for the atmospheric or surface concentration of corrosion-accelerating substances. Methods for remediating the reinforced concrete structure or crane rails to increase the expected lifetime of the store are also reviewed. Many of these techniques have previously been used at radioactive waste stores or other nuclear facilities in

Quantitative Nuclear Medicine Imaging: Concepts, Requirements and Methods

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-01-15

The absolute quantification of radionuclide distribution has been a goal since the early days of nuclear medicine. Nevertheless, the apparent complexity and sometimes limited accuracy of these methods have prevented them from being widely used in important applications such as targeted radionuclide therapy or kinetic analysis. The intricacy of the effects degrading nuclear medicine images and the lack of availability of adequate methods to compensate for these effects have frequently been seen as insurmountable obstacles in the use of quantitative nuclear medicine in clinical institutions. In the last few decades, several research groups have consistently devoted their efforts to the filling of these gaps. As a result, many efficient methods are now available that make quantification a clinical reality, provided appropriate compensation tools are used. Despite these efforts, many clinical institutions still lack the knowledge and tools to adequately measure and estimate the accumulated activities in the human body, thereby using potentially outdated protocols and procedures. The purpose of the present publication is to review the current state of the art of image quantification and to provide medical physicists and other related professionals facing quantification tasks with a solid background of tools and methods. It describes and analyses the physical effects that degrade image quality and affect the accuracy of quantification, and describes methods to compensate for them in planar, single photon emission computed tomography (SPECT) and positron emission tomography (PET) images. The fast paced development of the computational infrastructure, both hardware and software, has made drastic changes in the ways image quantification is now performed. The measuring equipment has evolved from the simple blind probes to planar and three dimensional imaging, supported by SPECT, PET and hybrid equipment. Methods of iterative reconstruction have been developed to allow for

ATLAS Future Framework Requirements Group Report

CERN Document Server

The ATLAS collaboration

2016-01-01

The Future Frameworks Requirements Group was constituted in Summer 2013 to consider and summarise the framework requirements from trigger and offline for configuring, scheduling and monitoring the data processing software needed by the ATLAS experiment. The principal motivation for such a re-examination arises from the current and anticipated evolution of CPUs, where multiple cores, hyper-threading and wide vector registers require a shift to a concurrent programming model. Such a model requires extensive changes in the current Gaudi/Athena frameworks and offers the opportunity to consider how HLT and offline processing can be better accommodated within the ATLAS framework. This note contains the report of the Future Frameworks Requirements Group.

3-D thermal weight function method and multiple virtual crack extension technique for thermal shock problems

International Nuclear Information System (INIS)

Lu Yanlin; Zhou Xiao; Qu Jiadi; Dou Yikang; He Yinbiao

2005-01-01

An efficient scheme, 3-D thermal weight function (TWF) method, and a novel numerical technique, multiple virtual crack extension (MVCE) technique, were developed for determination of histories of transient stress intensity factor (SIF) distributions along 3-D crack fronts of a body subjected to thermal shock. The TWF is a universal function, which is dependent only on the crack configuration and body geometry. TWF is independent of time during thermal shock, so the whole history of transient SIF distributions along crack fronts can be directly calculated through integration of the products of TWF and transient temperatures and temperature gradients. The repeated determinations of the distributions of stresses (or displacements) fields for individual time instants are thus avoided in the TWF method. An expression of the basic equation for the 3-D universal weight function method for Mode I in an isotropic elastic body is derived. This equation can also be derived from Bueckner-Rice's 3-D WF formulations in the framework of transformation strain. It can be understood from this equation that the so-called thermal WF is in fact coincident with the mechanical WF except for some constants of elasticity. The details and formulations of the MVCE technique are given for elliptical cracks. The MVCE technique possesses several advantages. The specially selected linearly independent VCE modes can directly be used as shape functions for the interpolation of unknown SIFs. As a result, the coefficient matrix of the final system of equations in the MVCE method is a triple-diagonal matrix and the values of the coefficients on the main diagonal are large. The system of equations has good numerical properties. The number of linearly independent VCE modes that can be introduced in a problem is unlimited. Complex situations in which the SIFs vary dramatically along crack fronts can be numerically well simulated by the MVCE technique. An integrated system of programs for solving the

Type extension trees

DEFF Research Database (Denmark)

Jaeger, Manfred

2006-01-01

We introduce type extension trees as a formal representation language for complex combinatorial features of relational data. Based on a very simple syntax this language provides a unified framework for expressing features as diverse as embedded subgraphs on the one hand, and marginal counts...... of attribute values on the other. We show by various examples how many existing relational data mining techniques can be expressed as the problem of constructing a type extension tree and a discriminant function....

What Influences Agents to Pursue a Career in Extension?

Science.gov (United States)

Arnold, Shannon; Place, Nick

2010-01-01

The qualitative study reported here explored why agricultural agents pursue an Extension career. A purposive sample was used to select twelve Florida agricultural agents. Interviews investigated positive and negative influences that affected agents' employment decisions. Grounded theory was used as the primary data analysis method (Strauss &…

76 FR 52693 - Proposed Extension of the Approval of Information Collection Requirements

Science.gov (United States)

2011-08-23

... Reduction Act of 1995 (PRA95). 44 U.S.C. 3056(c)(2)(A). This program helps to ensure that requested data can... manufacturing and mining or deemed hazardous, if the Secretary of Labor determines such employment is confined... provisions, Regulations 29 CFR 570.35a(b)(2) requires a state educational agency to file an application for...

Extension of station blackout coping capability and implications on nuclear safety

Energy Technology Data Exchange (ETDEWEB)

Volkanovski, Andrija, E-mail: andrija.volkanovski@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Prošek, Andrej [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia)

2013-02-15

Highlights: ► Modifications enhancing station blackout coping capability are analyzed. ► Analysis is done with deterministic and probabilistic safety analysis methods. ► The core heat up is delayed for at least the extension time interval. ► Auxiliary feedwater system delays core heat up even in presence of pumps seal leakage. ► Extension of station blackout coping capability decreases core damage frequency. -- Abstract: The safety of the nuclear power plant depends on the availability of the continuous and reliable sources of electrical energy during all modes of operation of the plant. The station blackout corresponds to a total loss of all alternate current (AC) power as a result of complete failure of both offsite and on-site AC power sources. The electricity for the essential systems during station blackout is provided from the batteries installed in the nuclear power plant. The results of the probabilistic safety assessment show that station blackout is one of the main and frequently the dominant contributor to the core damage frequency. The accident in Fukushima Daiichi nuclear power plants demonstrates the vulnerability of the currently operating nuclear power plants during the extended station blackout events. The objective of this paper is, considering the identified importance of the station blackout initiating event, to assess the implications of the strengthening of the SBO mitigation capability on safety of the NPP. The assessment is done with state-of-art deterministic and probabilistic methods and tolls with application on reference models of nuclear power plants. The U.S. NRC Station Blackout Rule describes procedure for the assessment of the size and capacity of the batteries in the nuclear power plant. The description of the procedure with the application on the reference plant and identified deficiencies in the procedure is presented. The safety analysis is done on reference model of the nuclear power plant. Obtained results show large

Extension of station blackout coping capability and implications on nuclear safety

International Nuclear Information System (INIS)

Volkanovski, Andrija; Prošek, Andrej

2013-01-01

Highlights: ► Modifications enhancing station blackout coping capability are analyzed. ► Analysis is done with deterministic and probabilistic safety analysis methods. ► The core heat up is delayed for at least the extension time interval. ► Auxiliary feedwater system delays core heat up even in presence of pumps seal leakage. ► Extension of station blackout coping capability decreases core damage frequency. -- Abstract: The safety of the nuclear power plant depends on the availability of the continuous and reliable sources of electrical energy during all modes of operation of the plant. The station blackout corresponds to a total loss of all alternate current (AC) power as a result of complete failure of both offsite and on-site AC power sources. The electricity for the essential systems during station blackout is provided from the batteries installed in the nuclear power plant. The results of the probabilistic safety assessment show that station blackout is one of the main and frequently the dominant contributor to the core damage frequency. The accident in Fukushima Daiichi nuclear power plants demonstrates the vulnerability of the currently operating nuclear power plants during the extended station blackout events. The objective of this paper is, considering the identified importance of the station blackout initiating event, to assess the implications of the strengthening of the SBO mitigation capability on safety of the NPP. The assessment is done with state-of-art deterministic and probabilistic methods and tolls with application on reference models of nuclear power plants. The U.S. NRC Station Blackout Rule describes procedure for the assessment of the size and capacity of the batteries in the nuclear power plant. The description of the procedure with the application on the reference plant and identified deficiencies in the procedure is presented. The safety analysis is done on reference model of the nuclear power plant. Obtained results show large

CIDOC-CRM extensions for conservation processes: A methodological approach

Science.gov (United States)

Vassilakaki, Evgenia; Zervos, Spiros; Giannakopoulos, Georgios

2015-02-01

This paper aims to report the steps taken to create the CIDOC Conceptual Reference Model (CIDOC-CRM) extensions and the relationships established to accommodate the depiction of conservation processes. In particular, the specific steps undertaken for developing and applying the CIDOC-CRM extensions for defining the conservation interventions performed on the cultural artifacts of the National Archaeological Museum of Athens, Greece are presented in detail. A report on the preliminary design of the DOC-CULTURE project (Development of an integrated information environment for assessment and documentation of conservation interventions to cultural works/objects with nondestructive testing techniques [NDTs], www.ndt-lab.gr/docculture), co-financed by the European Union NSRF THALES program, can be found in Kyriaki-Manessi, Zervos & Giannakopoulos (1) whereas the NDT&E methods and their output data through CIDOC-CRM extension of the DOC-CULTURE project approach to standardize the documentation of the conservation were further reported in Kouis et al. (2).

Meeting the measurement uncertainty and traceability requirements of ISO/AEC standard 17025 in chemical analysis.

Science.gov (United States)

King, B

2001-11-01

The new laboratory accreditation standard, ISO/IEC 17025, reflects current thinking on good measurement practice by requiring more explicit and more demanding attention to a number of activities. These include client interactions, method validation, traceability, and measurement uncertainty. Since the publication of the standard in 1999 there has been extensive debate about its interpretation. It is the author's view that if good quality practices are already in place and if the new requirements are introduced in a manner that is fit for purpose, the additional work required to comply with the new requirements can be expected to be modest. The paper argues that the rigour required in addressing the issues should be driven by customer requirements and the factors that need to be considered in this regard are discussed. The issues addressed include the benefits, interim arrangements, specifying the analytical requirement, establishing traceability, evaluating the uncertainty and reporting the information.

How to make agricultural extension demand-driven?: The case of India's agricultural extension policy

OpenAIRE

Birner, Regina; Anderson, Jock R.

2007-01-01

"Many countries have recognized the need to revive agricultural advisory or extension services (the terms are used interchangeably here) as a means of using agriculture as an engine of pro-poor growth; reaching marginalized, poor, and female farmers; and addressing new challenges, such as environmental degradation and climate change. In spite of ample experience with extension reform worldwide, identifying the reform options most likely to make extension more demand-driven remains a major cha...

Continental extension, magmatism and elevation; formal relations and rules of thumb

Science.gov (United States)

Lachenbruch, A.H.; Morgan, P.

1990-01-01

To investigate simplified relations between elevation and the extensional, magmatic and thermal processes that influence lithosphere buoyancy, we assume that the lithosphere floats on an asthenosphere of uniform density and has no flexural strength. A simple graph relating elevation to lithosphere density and thickness provides an overview of expectable conditions around the earth and a simple test for consistancy of continental and oceanic lithosphere models. The mass-balance relations yield simple general rules for estimating elevation changes caused by various tectonic, magmatic and thermal processes without referring to detailed models. The rules are general because they depend principally on buoyancy, which under our assumptions is specified by elevation, a known quantity; they do not generally require a knowledge of lithosphere thickness and density. The elevation of an extended terrain contains important information on its tectonic and magmatic history. In the Great Basin where Cenozoic extension is estimated to be 100%, the present high mean elevation ( ~ 1.75 km) probably requires substantial low-density magmatic contributions to the extending lithosphere. The elevation cannot be reasonably explained solely as the buoyant residue of a very high initial terrane, or of a lithosphere that was initially very thick and subsequently delaminated and heated. Even models with a high initial elevation typically call for 10 km or so of accumulated magmatic material of near-crustal density. To understand the evolution of the Great Basin, it is important to determine whether such intruded material is present; some could replenish the stretching crust by underplating and crustal intrusion and some might reside in the upper mantle. The elevation maintained or approached by an intruded extending lithosphere depends on the ratio B of how fast magma is supplied from the asthenosphere ( b km/Ma) to how fast the lithosphere spreads the magma out by extension (?? Ma-1). For a

Shelf life extension of litchi (Litchi chinensis) and overcoming quarantine barriers to international trade using radiation technology

International Nuclear Information System (INIS)

Gautam, Satyendra; Saxena, Sudhanshu; Kumar, Sanjeev; Hajare, Sachin N.; Wadhawan, Surbhi; Mishra, B.B.; More, Varsha S.; Sharma, Arun

2010-01-01

Litchi (Litchi chinensis) has a very short shelf life of 2-3 days at ambient temperature limiting its marketability. Gamma radiation processing in combination with low temperature storage was explored as a method to achieve shelf life extension and fulfill quarantine requirement for export during storage physics, biochemical, microbiological, organoleptic, antioxidant and radioprotective properties of two major commercially grown Indian cultivars of litchi, 'Shahi' and 'China', were analysed. Radiation treatment reduced microbial load in a dose dependent manner. Radiation (0.5kGy) treated and low temperature stored fruits retained the 'good' organoleptic rating till 28 days of storage while maintaining other quality attributes. (author)

Journal of Agricultural Extension

African Journals Online (AJOL)

Scope of journal The Journal of Agricultural Extension" is devoted to the advancement of knowledge of agricultural extension services and practice through the publication of original and empirically based research, ... Vol 22, No 1 (2018) ... Symbol recognition and interpretation of HIV/AIDS pictorial messages among rural ...

Oconee: Is life extension in the cards for plants of this vintage

International Nuclear Information System (INIS)

Killian, D.E.; Moore, K.E.; Tally, C.W.

1986-01-01

Recent nuclear-industry interest in plant life extension is prompted by the realization that the economics of plant life extension are clearly favorable. Studies sponsored by the Electric Power Research Institute (EPRI) show that replacing even the most costly nuclear components can easily be justified, if the life of the plant can be extended just a few years. This may not be apparent for the early, small plants, but its applicability to the larger plants that started to appear in the early 70s-such as the three 860-MW Oconee units-is hard to dispute. The large capital investment in the typical nuclear station and extensive decommissioning costs add impetus to life-extension efforts. The same is true for fossil plants, and they are being successfully refurbished to extend their operating lives. Refurbishment of a fossil plant is comparatively simple, however, especially with regard to licensing and environmental qualifications where recognized standards are already in place. In the case of nuclear plants, much work must be done before all the pertinent issues and alternatives are identified. Potentially conflicting objectives may require resolution before a utility makes long-term decisions about life extension. For example, a utility may decide to designate a plant to accommodate grid load swings. In the near term, this may be a logical choice. However, the long-term negative aspects of component thermal cycling should be considered, especially if plant life extension is deemed important

A method for determining customer requirement weights based on TFMF and TLR

Science.gov (United States)

Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

2013-11-01

'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

Multiport Combined Endoscopic Approach to Nonembolized Juvenile Nasopharyngeal Angiofibroma with Parapharyngeal Extension: An Emerging Concept

Directory of Open Access Journals (Sweden)

Tiruchy Narayanan Janakiram

2016-01-01

Full Text Available Background. Surgical approaches to the parapharyngeal space (PPS are challenging by virtue of deep location and neurovascular content. Juvenile Nasopharyngeal Angiofibroma (JNA is a formidable hypervascular tumor that involves multiple compartments with increase in size. In tumors with extension to parapharyngeal space, the endonasal approach was observed to be inadequate. Combined Endoscopic Endonasal Approaches and Endoscopic Transoral Surgery (EEA-ETOS approach has provided a customized alternative of multicorridor approach to access JNA for its safe and efficient resection. Methods. The study demonstrates a case series of patients of JNA with prestyloid parapharyngeal space extension operated by endoscopic endonasal and endoscopic transoral approach for tumor excision. Results. The multiport EEA-ETOS approach was used to provide wide exposure to access JNA in parapharyngeal space. No major complications were observed. No conversion to external approach was required. Postoperative morbidity was low and postoperative scans showed no residual tumor. A one-year follow-up was maintained and there was no evidence of disease recurrence. Conclusion. Although preliminary, our experience demonstrates safety and efficacy of multiport approach in providing access to multiple compartments, facilitating total excision of JNA in selected cases.

Critical requirements of the SSTR method

International Nuclear Information System (INIS)

Gold, R.

1975-08-01

Discrepancies have been reported in absolute fission rate measurements observed with Solid State Tract Recorders (SSTR) and fission chambers which lie well outside experimental error. As a result of these comparisons, the reliability of the SSTR method has been seriously questioned, and the fission chamber method has been advanced for sole use in absolute fission rate determinations. In view of the absolute accuracy already reported and well documented for the SSTR method, this conclusion is both surprising and unfortunate. Two independent methods are highly desirable. Moreover, these two methods more than compliment one another, since certain in-core experiments may be amenable to either but not both techniques. Consequently, one cannot abandon the SSTR method without sacrificing crucial advantages. A critical reappraisal of certain aspects of the SSTR method is offered in the hope that the source of the current controversy can be uncovered and a long term beneficial agreement between these two methods can therefore be established. (WHK)

AUTHENTIC MATERIALS IN EXTENSIVE READING CLASS AT STAIN PONOROGO

Directory of Open Access Journals (Sweden)

Dhinuk Puspita Kirana

2013-12-01

Full Text Available It is widely believed that English Foreign Language (EFL learners need to develop their language proficiency by getting so much input. Moreover, students need to be familiarized with the real English us­age where real forms of communication and cultural knowledge are crucially exposed. Teaching through authentic materials will make the learners feel that they are learning a real language which is used by the real native speakers for real communication. incorporating au­thentic materials helps students acquire an effective communicative competence in the language focus. The research intended to describe the implementation of authentic materials in extensive reading class, the problems arise and the students’ responses toward the authen­tic materials in extensive reading class. The design of the research was Descriptive Qualitative method and the research subject was the lecturer of Extensive Reading class and 33 students in B class of the fourth semester of STAIN Ponorogo who took Extensive Read­ing subject. The instruments used were in the form of observation sheet, interview guideline and questionnaire. The implementation of authentic materials in extensive reading class covered some procedures into three main phases namely (1 Pre­ Activity, (2 Main­ Activity and (3 Post­Activity. The activities in main activity are as follows: (a Pre­ Activity; (b Whilst ­Activity; and (3 The language focus stage. There were problems arose during the implementation in terms of complicated planning, more time allocation and some disinterested students. Finally, the students showed significantly positive attitude toward the implementation of authentic materials in extensive reading class.

An extensive analysis of disease-gene associations using network integration and fast kernel-based gene prioritization methods.

Science.gov (United States)

Valentini, Giorgio; Paccanaro, Alberto; Caniza, Horacio; Romero, Alfonso E; Re, Matteo

2014-06-01

In the context of "network medicine", gene prioritization methods represent one of the main tools to discover candidate disease genes by exploiting the large amount of data covering different types of functional relationships between genes. Several works proposed to integrate multiple sources of data to improve disease gene prioritization, but to our knowledge no systematic studies focused on the quantitative evaluation of the impact of network integration on gene prioritization. In this paper, we aim at providing an extensive analysis of gene-disease associations not limited to genetic disorders, and a systematic comparison of different network integration methods for gene prioritization. We collected nine different functional networks representing different functional relationships between genes, and we combined them through both unweighted and weighted network integration methods. We then prioritized genes with respect to each of the considered 708 medical subject headings (MeSH) diseases by applying classical guilt-by-association, random walk and random walk with restart algorithms, and the recently proposed kernelized score functions. The results obtained with classical random walk algorithms and the best single network achieved an average area under the curve (AUC) across the 708 MeSH diseases of about 0.82, while kernelized score functions and network integration boosted the average AUC to about 0.89. Weighted integration, by exploiting the different "informativeness" embedded in different functional networks, outperforms unweighted integration at 0.01 significance level, according to the Wilcoxon signed rank sum test. For each MeSH disease we provide the top-ranked unannotated candidate genes, available for further bio-medical investigation. Network integration is necessary to boost the performances of gene prioritization methods. Moreover the methods based on kernelized score functions can further enhance disease gene ranking results, by adopting both

7 CFR 3430.906 - Matching requirements.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Matching requirements. 3430.906 Section 3430.906 Agriculture Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE COMPETITIVE AND NONCOMPETITIVE NON-FORMULA FEDERAL...

Extension and Enhancement Methods for Setting Data Quality Objectives

Energy Technology Data Exchange (ETDEWEB)

D. Goodman

2000-03-01

The project developed statistical tools for the application of decision theory and operations research methods, including cost-benefit analysis, to the DQO process for environmental clean up. A pilot study was conducted, using these methods at the Hanford site, to estimate vadose zone contamination plumes under the SX tank farm, and to help plan further sampling.

Extension and Enhancement Methods for Setting Data Quality Objectives

International Nuclear Information System (INIS)

Goodman, D.

2000-01-01

The project developed statistical tools for the application of decision theory and operations research methods, including cost-benefit analysis, to the DQO process for environmental clean up. A pilot study was conducted, using these methods at the Hanford site, to estimate vadose zone contamination plumes under the SX tank farm, and to help plan further sampling

Extensive amalgam tattoo on the alveolar-gingival mucosa.

Science.gov (United States)

Galletta, Vivian C; Artico, Gabriela; Dal Vechio, Aluana M C; Lemos, Celso A; Migliari, Dante A

2011-01-01

Amalgam tattoos are common exogenous pigmented lesions of the oral mucosa occurring mainly by inadvertent placement of amalgam particles into soft tissues. The diagnosis of amalgam tattoo is simple, usually based on clinical findings associated with presence or history of amalgam fillings removal. Intraoral X-rays may be helpful in detecting amalgam-related radiopacity. In cases where amalgam tattoo cannot be differentiated from other causes of oral pigmentation, a biopsy should be performed. This article deals with an extensive amalgam tattoo lesion which required a biopsy for a definitive diagnosis.

The Yellowstone ‘hot spot’ track results from migrating Basin Range extension

Science.gov (United States)

Foulger, Gillian R.; Christiansen, Robert L.; Anderson, Don L.; Foulger, Gillian R.; Lustrino, Michele; King, Scott D.

2015-01-01

Whether the volcanism of the Columbia River Plateau, eastern Snake River Plain, and Yellowstone (western U.S.) is related to a mantle plume or to plate tectonic processes is a long-standing controversy. There are many geological mismatches with the basic plume model as well as logical flaws, such as citing data postulated to require a deep-mantle origin in support of an “upper-mantle plume” model. USArray has recently yielded abundant new seismological results, but despite this, seismic analyses have still not resolved the disparity of opinion. This suggests that seismology may be unable to resolve the plume question for Yellowstone, and perhaps elsewhere. USArray data have inspired many new models that relate western U.S. volcanism to shallow mantle convection associated with subduction zone processes. Many of these models assume that the principal requirement for surface volcanism is melt in the mantle and that the lithosphere is essentially passive. In this paper we propose a pure plate model in which melt is commonplace in the mantle, and its inherent buoyancy is not what causes surface eruptions. Instead, it is extension of the lithosphere that permits melt to escape to the surface and eruptions to occur—the mere presence of underlying melt is not a sufficient condition. The time-progressive chain of rhyolitic calderas in the eastern Snake River Plain–Yellowstone zone that has formed since basin-range extension began at ca. 17 Ma results from laterally migrating lithospheric extension and thinning that has permitted basaltic magma to rise from the upper mantle and melt the lower crust. We propose that this migration formed part of the systematic eastward migration of the axis of most intense basin-range extension. The bimodal rhyolite-basalt volcanism followed migration of the locus of most rapid extension, not vice versa. This model does not depend on seismology to test it but instead on surface geological observations.

Dimension and extensions

CERN Document Server

Aarts, JM

1993-01-01

Two types of seemingly unrelated extension problems are discussed in this book. Their common focus is a long-standing problem of Johannes de Groot, the main conjecture of which was recently resolved. As is true of many important conjectures, a wide range of mathematical investigations had developed, which have been grouped into the two extension problems. The first concerns the extending of spaces, the second concerns extending the theory of dimension by replacing the empty space with other spaces. The problem of de Groot concerned compactifications of spaces by means of an adjunction of a set of minimal dimension. This minimal dimension was called the compactness deficiency of a space. Early success in 1942 lead de Groot to invent a generalization of the dimension function, called the compactness degree of a space, with the hope that this function would internally characterize the compactness deficiency which is a topological invariant of a space that is externally defined by means of compact extensions of a...

The Effects of Leader-Member Exchanges on the Relationships Between Extension Agents and County Extension Directors in Florida

OpenAIRE

Matt Benge; Amy Harder

2017-01-01

The relationship between a supervisor and employee has a direct effect on the employee’s job satisfaction, work productivity, and efficiency. Understanding the interactions between Extension agents and County Extension Directors is critical to maintaining positive relationships and providing adequate support to Extension supervisors through professional development and training opportunities. This article examined the dyadic relationships between Extension agents and County Extension Direc...

75 FR 77002 - Proposed Extension of Information Collection Request Submitted for Public Comment; Affordable...

Science.gov (United States)

2010-12-10

... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information... Review Procedures for Non-Grandfathered Plans AGENCY: Employee Benefits Security Administration... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

76 FR 76439 - Proposed Extension of Information Collection Requests Submitted for Public Comment: Disclosures...

Science.gov (United States)

2011-12-07

... requires administrators of pension and welfare benefit plans (collectively, employee benefit plans), and... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information... Correction Program and Class Exemption AGENCY: Employee Benefits Security Administration, Department of Labor...

Receiver Operator Characteristic Tools Graphic User Interface Extension for R Commander

Directory of Open Access Journals (Sweden)

Daniel Corneliu LEUCUŢA

2015-12-01

Full Text Available Background: Receiver Operator Characteristic (ROC curve, is a graphical plot which presents the performance of a binary classifier when the discrimination cutoff is varied. The aim of this work was to create an extension for R Commander that offers a graphical user interface for Receiver Operator Characteristic tools provided by several existing command line accessible packages like pROC and ROCR. Material and Methods: The extension was built and tested with R version 3.2.0 and R Commander 2.1-7. Results: We built an extension called RcmdrPlugin.ROC that we uploaded on the CRAN servers. The extension adds a new menu called ROC, along with two submenus pROC and ROCR that broadly corresponds to commands available to access the functions of these packages. The pROC menu offers several commands: to plot a ROC curve for a dataset or for a logistic regression model, to compare paired and unpaired ROC curves, each providing the following tabs: General (to select the variables for the analysis, and options for switching cases with controls; Smoothing (allowing the user to select different types of smoothing – binominal, density, distributions like normal, lognormal, ...; AUC (to specify the partial area under the curve (AUC options, CI (to select the options of confidence intervals (CI – the level, computing method: DeLong, bootstrap, ...; Plot (for the plotting options. The ROCR dialogue window offers more options in choosing the performance measures for the plot. Conclusion: The RcmdrPlugin.ROC extension helps less advanced users of R accessing ROC tools in a friendly graphical user interface.

Characteristics, Views Held of Agricultural Extension Activities, and Communication Behavior of Hsien Extension Supervisors in Taiwan.

Science.gov (United States)

Hong, Pi-Feng

Government agencies in Taiwan have carried out agricultural extension programs since 1910, with the assistance of Farmers' Associations. Programs have been expanded since 1953, and now include both general extension (subsidy programs) and educational extension. Comparison of personal characteristics of hsien (county) Farmers' Association…

Quantitative analysis on the urban flood mitigation effect by the extensive green roof system

International Nuclear Information System (INIS)

Lee, J.Y.; Moon, H.J.; Kim, T.I.; Kim, H.W.; Han, M.Y.

2013-01-01

Extensive green-roof systems are expected to have a synergetic effect in mitigating urban runoff, decreasing temperature and supplying water to a building. Mitigation of runoff through rainwater retention requires the effective design of a green-roof catchment. This study identified how to improve building runoff mitigation through quantitative analysis of an extensive green-roof system. Quantitative analysis of green-roof runoff characteristics indicated that the extensive green roof has a high water-retaining capacity response to rainfall of less than 20 mm/h. As the rainfall intensity increased, the water-retaining capacity decreased. The catchment efficiency of an extensive green roof ranged from 0.44 to 0.52, indicating reduced runoff comparing with efficiency of 0.9 for a concrete roof. Therefore, extensive green roofs are an effective storm water best-management practice and the proposed parameters can be applied to an algorithm for rainwater-harvesting tank design. -- Highlights: •Urban extensive green roof systems have a synergetic effect in mitigating urban runoff. •These systems are improve runoff mitigation and decentralized urban water management. •These systems have a high water-retaining capacity response to rainfall of less than 20 mm/h. •The catchment efficiency of an extensive green roof ranged from 0.44 to 0.52. -- Extensive green-roofs are an effective storm water best-management practice and the proposed parameters can be applied to mitigate urban runoff

76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

Science.gov (United States)

2011-01-19

... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

Guidelines for Conducting Mixed-methods Research: An Extension and Illustration.

OpenAIRE

Venkatesh, Viswanath

2016-01-01

In this paper, we extend the guidelines of Venkatesh et al. (2013) for mixed-methods research by identifying and integrating variations in mixed-methods research. By considering 14 properties of mixed-methods research (e.g., purposes, research questions, epistemological assumptions), our guidelines demonstrate how researchers can flexibly identify the existing variations in mixed-methods research and proceed accordingly with a study design that suits their needs. To make the guide...

Collaboration of Extension and Grape Industry Members to Create a New Extension Publication

Science.gov (United States)

Stafne, Eric T.; Ingels, George; Ingels, Jane; Carroll, Becky

2016-01-01

Collaboration is an important part of the interaction between Extension and industry. Successful sharing of workload can provide benefits for both parties. A project to create a workbook to address vineyard sustainability was initiated by members of the Oklahoma grape industry with assistance from land-grant university Extension. Productive…

Curricular intersections of university extension and teaching in Physical Therapy programs

Directory of Open Access Journals (Sweden)

Shamyr Sulyvan de Castro

Full Text Available Introduction University extension can be a vehicle for social change and aid in the education of university students; however, it is important to study how it is inserted in university programs so that educational actions and policies can be planned more adequately. Objectives To study the insertion of extension activities in undergraduate physical therapy curricula in Brazilian federal universities. Method Documentary research conducted by accessing files available on the Internet. Data were analyzed quantitatively in the form of numbers and percentages. We examined documents from 22 of the 29 federal universities that offered physical therapy programs. Results University extension takes the form of complementary academic activities together with other options such as participating in conferences, specific training courses and working as a teaching assistant. Undergraduate physical therapy courses have a 4,000h to 4,925h course load, of which 0.72% to 8.9% are dedicated to extension activities. Conclusion The data indicate that the insertion of extension activities in undergraduate physical therapy programs offered by Brazilian federal universities needs to be reassessed according to recommended policies and guidelines.

What is the proper evaluation method: Some basic considerations

International Nuclear Information System (INIS)

Leeb, Helmut; Schnabel, Georg; Srdinko, Thomas

2014-01-01

Recent developments and applications demand for an extension of the energy range and the inclusion of reliable uncertainty information in nuclear data libraries. Due to the scarcity of neutron-induced reaction data beyond 20 MeV the extension of the energy range up to at least 150 MeV is not trivial because the corresponding nuclear data evaluations depend heavily on nuclear models and proper evaluation methods are still under discussion. Restricting to evaluation techniques based on Bayesian statistics the influence of the a priori knowledge on the final result of the evaluation is considered. The study clearly indicates the need to account properly for the deficiencies of the nuclear model. Concerning the covariance matrices it is argued that they depend not only on the model, but also on the method of generation and an additional consent is required for the comparison of different evaluations of the same data sets. (authors)

The Brazilian Experience with Agroecological Extension: A Critical Analysis of Reform in a Pluralistic Extension System

Science.gov (United States)

Diesel, Vivien; Miná Dias, Marcelo

2016-01-01

Purpose: To analyze the Brazilian experience in designing and implementing a recent extension policy reform based on agroecology, and reflect on its wider theoretical implications for extension reform literature. Design/methodology/approach: Using a critical public analysis we characterize the evolution of Brazilian federal extension policy…

Reconstructive Surgery of Extensive Face and Neck Burn Scars Using Tissue Expanders

OpenAIRE

Ashab Yamin, Mohammad Reza; Mozafari, Naser; Mozafari, Mohadase; Razi, Zahra

2015-01-01

BACKGROUND Neck reconstruction is considered as one of the most important surgeries in cosmetic and reconstructive surgery.?The present study aimed to assess the results of reconstructive surgery of extensive face and neck burning scars using tissue expanders. METHODS This descriptive prospective study was conducted on 36 patients with extensive burning scars on the neck and face. Operation for tissue expander insertion was performed and tissue distension started two or three weeks later, dep...

Extension properties of states on operator algebras

Science.gov (United States)

Hamhalter, Jan

1995-08-01

We summarize and deepen some recent results concerning the extension problem for states on operator algebras and general quantum logics. In particular, we establish equivalence between the Gleason extension property, the Hahn-Banach extension property, and the universal state extension property of projection logics. Extensions of Jauch-Piron states are investigated.

Consumer Perceptions of Fruit and Vegetable Origin, Growing Methods, and Willingness to Pay in Trinidad and Tobago Marketplaces: Implications for Extension Programming

Directory of Open Access Journals (Sweden)

M’Randa R. Sandlin

2017-10-01

Full Text Available Consumer behavior is a complex phenomenon encompassing internal, external, and situational factors. This study examined perceptions of market consumers about fruits and vegetables in Trinidad and Tobago in terms of produce origin, growing method, and willingness to pay. A stratified purposive sample of consumers at 14 unique market locations was surveyed to measure the three constructs and demographics. Descriptive statistics, correlational analysis, a ttest, and one-way analysis of variance were used to analyze the data. Findings revealed consumers have positive perceptions of locally grown produce and produce grown without chemicals. Findings also revealed a slight willingness to pay more for such characteristics. There were small to moderate correlations among the three constructs. Male and female perceptions of locally grown produce were significantly different, but no differences were found based on age. Extension educators working with producers who sell directly to consumers can utilize results from this study in working with clientele to tailor marketing and production strategies. Further research into social norms and perceived behavior control is recommended to better understand consumer behavior and help Extension better prepare stakeholders for success in the market places.

Using an Augmented Lagrangian Method and block fracturing in the DDA method

International Nuclear Information System (INIS)

Lin, C.T.; Amadei, B.; Sture, S.

1994-01-01

This paper presents two extensions to the Discontinuous Deformation Analysis (DDA) method orginally proposed by Shi for modeling the response of blocky rock masses to mechanical loading. The first extension consists of improving the block contact algorithm. An Augmented Lagrangian Method is used to replace the Penalty Method orginally proposed. It allows Lagrange multipliers to be introduced without increasing the number of equations that need to be solved and thus, block contract forces can be calculated more accurately. A block fracturing capability based on a three-parameter Mohr-Coulomb criterion represents the second extension. It allows for shear or tensile fracturing of intact blocks and the formation of smaller blocks

Determining pomegranate water and nitrogen requirements with drip irrigation

Science.gov (United States)

Despite being an ancient crop there is limited knowledge on the water and nitrogen (N) requirements of pomegranate. We conducted research at the University of California, Kearney Agricultural Research and Extension Center (KARE) to determine the water and nitrogen requirements of a developing pomegr...

A Survey of Symplectic and Collocation Integration Methods for Orbit Propagation

Science.gov (United States)

Jones, Brandon A.; Anderson, Rodney L.

2012-01-01

Demands on numerical integration algorithms for astrodynamics applications continue to increase. Common methods, like explicit Runge-Kutta, meet the orbit propagation needs of most scenarios, but more specialized scenarios require new techniques to meet both computational efficiency and accuracy needs. This paper provides an extensive survey on the application of symplectic and collocation methods to astrodynamics. Both of these methods benefit from relatively recent theoretical developments, which improve their applicability to artificial satellite orbit propagation. This paper also details their implementation, with several tests demonstrating their advantages and disadvantages.

Extensive hypertrophic lupus erythematosus: Atypical presentation

Directory of Open Access Journals (Sweden)

Tarun Narang

2012-01-01

Full Text Available Lupus erythematosus (LE is a disease with a wide spectrum of cutaneous and systemic manifestations. Clinical features of patients with LE show a great variation, and for this reason it is difficult to develop a unifying concept of this disease. Our objective is to present a case of hypertrophic LE with atypical morphology and extensive involvement, who responded favorably to isotretinoin. Diagnosis of hypertrophic lupus erythematosus (HLE was confirmed by characteristic histopathological findings. Combination therapy with isotretinoin and hydroxychloroquine resulted in flattening and repression of previously refractory skin lesions. Sometimes, HLE lesions may present a diagnostic and therapeutic dilemma. In long standing lesions, squamous cell carcinoma may arise. Therefore, HLE requires adequate therapy with clinical and histopathological follow up.

Strengthening method of concrete structure

Science.gov (United States)

Inge, Wewin; Audrey; Nugroho, Sofie; Njo, Helen

2018-03-01

Building extension in Indonesia is not favored, and not many people know the advantages of the method because architects and engineers tend to lack the knowledge and experience. The aim of this paper is to explain a method on how to strengthen a concrete building structure that people can use/learn as a better way to cut potential cost and save time. The strengthening method explained in this paper is steel jacketing, providing a case study of this method in the extension of a restaurant located in Medan, Indonesia. In this study, engineers calculated that the tensile stress of the existing RC column and beam is not strong enough to reinforce the building extension applied load. Therefore, the steel jacketing method can be applied to improve the column and beam strength and ductility. The result of the case study proves that this is one of the best methods for building extension applied in Indonesia.

The transition from diffuse to focused extension: Modeled evolution of the West Antarctic Rift system

Science.gov (United States)

Huerta, Audrey D.; Harry, Dennis L.

2007-03-01

Two distinct stages of extension are recognized in the West Antarctic Rift system (WARS). During the first stage, beginning in the Late Cretaceous, extension was broadly distributed throughout much of West Antarctica. A second stage of extension in the late Paleogene was focused primarily in the Victoria Land Basin, near the boundary with the East Antarctic craton. The transition to focused extension was roughly coeval with volcanic activity and strike-slip faulting in the adjacent Transantarctic Mountains. This spatial and temporal correspondence suggests that the transition in extensional style could be the result of a change in plate motions or impingement of a plume. Here we use finite element models to study the processes and conditions responsible for the two-stage evolution of rifting in the WARS. Model results indicate that the transition from a prolonged period of broadly distributed extension to a later period of focused rifting did not require a change in the regional stress regime (changes in plate motion), or deep mantle thermal state (impingement of a plume). Instead, we attribute the transition from diffuse to focused extension to an early stage dominated by the initially weak accreted lithosphere of West Antarctica, and a later stage that concentrated around a secondary weakness located at the boundary between the juvenile West Antarctica lithosphere and Precambrian East Antarctic craton. The modeled transition in extension from the initially weak West Antarctica region to the secondary weakness at the West Antarctic-East Antarctic boundary is precipitated by strengthening of the West Antarctica lithosphere during syn-extensional thinning and cooling. The modeled syn-extensional strengthening of the WARS lithosphere promotes a wide-rift mode of extension between 105 and ˜ 65 Ma. By ˜ 65 Ma most of the extending WARS region becomes stronger than the area immediately adjacent to the East Antarctic craton and extension becomes concentrated near the

Time Extensions of Petri Nets for Modelling and Verification of Hard Real-Time Systems

Directory of Open Access Journals (Sweden)

Tomasz Szmuc

2002-01-01

Full Text Available The main aim ofthe paper is a presentation of time extensions of Petri nets appropriate for modelling and analysis of hard real-time systems. It is assumed, that the extensions must provide a model of time flow an ability to force a transition to fire within a stated timing constraint (the so-called the strong firing rule, and timing constraints represented by intervals. The presented survey includes extensions of classical Place/Transition Petri nets, as well as the ones applied to high-level Petri nets. An expressiveness of each time extension is illustrated using simple hard real-time system. The paper includes also a brief description of analysis and veryication methods related to the extensions, and a survey of software tools supporting modelling and analysis ofthe considered Petri nets.

75 FR 48728 - The Hydrostatic Testing Provision of the Portable Fire Extinguishers Standard; Extension of the...

Science.gov (United States)

2010-08-11

... Hydrostatic Testing Provision of the Portable Fire Extinguishers Standard; Extension of the Office of... the information collection requirements contained in the Hydrostatic Testing provision of the Portable... 48729

Mission from Mars - a method for exploring user requirements for children in a narrative space

DEFF Research Database (Denmark)

Dindler, Christian; Ludvigsen, Martin; Lykke-Olesen, Andreas

2005-01-01

In this paper a particular design method is propagated as a supplement to existing descriptive approaches to current practice studies especially suitable for gathering requirements for the design of children's technology. The Mission from Mars method was applied during the design of an electronic...... school bag (eBag). The three-hour collaborative session provides a first-hand insight into children's practice in a fun and intriguing way. The method is proposed as a supplement to existing descriptive design methods for interaction design and children....

Secondary nerve lengthening to obtain full knee extension in popliteal pterygium syndrome.

Science.gov (United States)

Boeckx, Willy; Misani, Marta; Vandermeeren, Liesbeth; Franck, Diane; Zirak, Christophe; Demey, Albert

2014-05-01

Microsurgical nerve lengthening was performed in two siblings presenting a popliteal pterigium syndrome with a knee flexion contracture of 80 degrees. After the first attempt for nerve lengthening and knee extension elsewhere, a repeated lengthening was required due to continuing tip-toe walking and recurrent knee contracture at the age of 3 years. An extensive external and internal interfascicular microsurgical neurolysis resulted in a lengthening of the nerves. A full length of leg procedure had to be performed, inclusive of Achilles tendon lengthening to obtain a complete extension of the knee and a 90-degree ankle flexion. Maintaining the leg in a fully extended position was obtained with a dynamic splinting in the first month after the operation. When timing the operation we have to consider the importance of adequate precision of the microsurgical neurolysis, down to the identification of the Fontana bands, and the adequate postoperative splinting. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Extension of TFTR operations to higher toroidal field levels

International Nuclear Information System (INIS)

Woolley, R.D.

1995-01-01

For the past year, TFTR has sometimes operated at extended toroidal field (TF) levels. The extension to 5.6 Tesla (79 kA) was crucial for TFTR's November 1994 10.7 MW DT fusion power record. The extension to 6.0 Tesla (85 kA) was commissioned on 9 September 1995. There are several reasons that one could expect the TF coils to survive the higher stresses that develop at higher fields. They were designed to operate at 5.2 Tesla with a vertical field of 0.5 Tesla, whereas the actual vertical field needed for the plasma does not exceed 0.35 Tesla. Their design specification explicitly required they survive some pulses at 6.0 Tesla. TF coil mechanical analysis computer models available during coil design were crude, leading to conservative design. And design analyses also had to consider worst-case misoperations that TFTR's real time Coil Protection Calculators (CPCs) now positively prevent from occurring

26 CFR 31.3402(q)-1 - Extension of withholding to certain gambling winnings.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Extension of withholding to certain gambling... to certain gambling winnings. (a)(1) General rule. Every person, including the Government of the.... With respect to reporting requirements for certain payments of gambling winnings not subject to...

Extension of frequency-based dissimilarity for retrieving similar plasma waveforms

International Nuclear Information System (INIS)

Hochin, Teruhisa; Koyama, Katsumasa; Nakanishi, Hideya; Kojima, Mamoru

2008-01-01

Some computer-aided assistance in finding the waveforms similar to a waveform has become indispensable for accelerating data analysis in the plasma experiments. For the slowly-varying waveforms and those having time-sectional oscillation patterns, the methods using the Fourier series coefficients of waveforms in calculating the dissimilarity have successfully improved the performance in retrieving similar waveforms. This paper treats severely-varying waveforms, and proposes two extensions to the dissimilarity of waveforms. The first extension is to capture the difference of the importance of the Fourier series coefficients of waveforms against frequency. The second extension is to consider the outlines of waveforms. The correctness of the extended dissimilarity is experimentally evaluated by using the metrics used in evaluating that of the information retrieval, i.e. precision and recall. The experimental results show that the extended dissimilarity could improve the correctness of the similarity retrieval of plasma waveforms

Associations between Trunk Extension Endurance and Isolated Lumbar Extension Strength in Both Asymptomatic Participants and Those with Chronic Low Back Pain

Directory of Open Access Journals (Sweden)

Rebecca Conway

2016-09-01

Full Text Available Background: Strength and endurance tests are important for both clinical practice and research due to the key role they play in musculoskeletal function. In particular, deconditioning of the lumbar extensor musculature has been associated with low back pain (LBP. Due to the relationship between strength and absolute endurance, it is possible that trunk extension (TEX endurance tests could provide a proxy measure of isolated lumbar extension (ILEX strength and thus represent a simple, practical alternative to ILEX measurements. Though, the comparability of TEX endurance and ILEX strength is presently unclear and so the aim of the present study was to examine this relationship. Methods: Thirty eight healthy participants and nineteen participants with non-specific chronic LBP and no previous lumbar surgery participated in this cross-sectional study design. TEX endurance was measured using the Biering–Sorensen test. A maximal ILEX strength test was performed on the MedX lumbar-extension machine. Results: A Pearson’s correlation revealed no relationship between TEX endurance and ILEX strength in the combined group (r = 0.035, p = 0.793, the chronic LBP group (r = 0.120, p = 0.623 or the asymptomatic group (r = −0.060, p = 0.720. Conclusions: The results suggest that TEX is not a good indicator of ILEX and cannot be used to infer results regarding ILEX strength. However, a combination of TEX and ILEX interpreted together likely offers the greatest and most comprehensive information regarding lumbo-pelvic function during extension.

Risk-based evaluation of allowed outage time and surveillance test interval extensions for nuclear power plants

International Nuclear Information System (INIS)

Gibelli, Sonia Maria Orlando

2008-03-01

The main goal of this work is, through the use of Probabilistic Safety Analysis (PSA), to evaluate Technical Specification (TS) Allowed Outage Times (AOT) and Surveillance Test Intervals (STI) extensions for Angra 1 nuclear power plant. PSA has been incorporated as an additional tool, required as part of NPP licensing process. The risk measure used in this work is the Core Damage Frequency (CDF), obtained from the Angra 1 PSA Level 1. AOT and STI extensions are calculated for the Safety Injection System (SIS), Service water System (SAS) and Auxiliary Feedwater System (AFS) through the use of SAPHIRE code. In order to compensate for the risk increase caused by the extensions, compensatory measures as test of redundant train prior to entering maintenance and staggered test strategy are proposed. Results have shown that the proposed AOT extensions are acceptable for the SIS and SAS with the implementation of compensatory measures. The proposed AOT extension is not acceptable for the AFS. The STI extensions are acceptable for all three systems. (author)

Computational methods for the nuclear and neutron matter problems. Progress report

International Nuclear Information System (INIS)

Kalos, M.H.

1979-01-01

A brief report is given of progress on the development of Monte Carlo methods for the treatment of both simplified and realistic models of extensive neutron and nuclear matter and, eventually, of finite nuclei. A wide class of algorithms that may allow the efficient sampling of the integrands required in calculating the energy expectations with useful trial wave functions was devised

Aims and methods of nuclear materials management

International Nuclear Information System (INIS)

Leven, D.; Schier, H.

1979-05-01

Whilst international safeguarding of fissile materials against abuse has been the subject of extensive debate, little public attention has so far been devoted to the internal security of these materials. All countries using nuclear energy for peaceful purposes have laid down appropriate regulations. In the Federal Republic of Germany safeguards are required, for instance, by the Atomic Energy Act, and are therefore a prerequisite for licensing. The aims and methods of national nuclear materials management are contrasted with viewpoints on international safeguards

75 FR 51844 - Proposed Extension of Information Collection Request Submitted for Public Comment; Regulation...

Science.gov (United States)

2010-08-23

... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information... Beneficiaries Who Are Parties in Interest With Respect to the Plan AGENCY: Employee Benefits Security... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

The effects of sleep extension on sleep and cognitive performance in adolescents with chronic sleep reduction: an experimental study

NARCIS (Netherlands)

Dewald-Kaufmann, J.F.; Oort, F.J.; Meijer, A.M.

2013-01-01

Objective: To investigate the effects of gradual sleep extension in adolescents with chronic sleep reduction. Outcome variables were objectively measured sleep and cognitive performance. Methods: Participants were randomly assigned to either a sleep extension group (gradual sleep extension by

Organisational reviews - requirements, methods and experience. Progress report 2006

Energy Technology Data Exchange (ETDEWEB)

Reiman, T.; Oedewald, P.; Wahlstroem, B. [VTT, Technical Research Centre of Finland (Finland); Rollenhagen, C.; Kahlbom, U. [Maelardalen University (FI)

2007-04-15

Organisational reviews are important instruments in the continuous quest for improved performance. In the nuclear field there has been an increasing regulatory interest in organisational performance, because incidents and accidents often point to organisational deficiencies as one of the major precursors. Many methods for organisational reviews have been proposed, but they are mostly based on ad hoc approaches to specific problems. The absence of well-established techniques for organisational reviews has already shown to cause discussions and controversies on different levels. The aim of the OrRe project is to collect the experiences from organisational reviews carried out so far and to reflect them in a theoretical model of organisational performance. Furthermore, the project aims to reflect on the criteria for the definition of the scope and content of organisational reviews. Finally, recommendations will be made for guidance for people participating in organisational reviews. This progress report describes regulatory practices in Finland and Sweden together with some case examples of organizational reviews and assessment in both countries. Some issues of concern are raised and an outline for the next year's work is proposed. Issues of concern include the sufficient depth of the assessment, the required competence in assessments, data and criteria problems, definition of the boundaries of the system to be assessed, and the necessary internal support and organisational maturity required for successful assessments. Finally, plans for next year's work are outlined. (au)

Organisational reviews - requirements, methods and experience. Progress report 2006

International Nuclear Information System (INIS)

Reiman, T.; Oedewald, P.; Wahlstroem, B.; Rollenhagen, C.; Kahlbom, U.

2007-04-01

Organisational reviews are important instruments in the continuous quest for improved performance. In the nuclear field there has been an increasing regulatory interest in organisational performance, because incidents and accidents often point to organisational deficiencies as one of the major precursors. Many methods for organisational reviews have been proposed, but they are mostly based on ad hoc approaches to specific problems. The absence of well-established techniques for organisational reviews has already shown to cause discussions and controversies on different levels. The aim of the OrRe project is to collect the experiences from organisational reviews carried out so far and to reflect them in a theoretical model of organisational performance. Furthermore, the project aims to reflect on the criteria for the definition of the scope and content of organisational reviews. Finally, recommendations will be made for guidance for people participating in organisational reviews. This progress report describes regulatory practices in Finland and Sweden together with some case examples of organizational reviews and assessment in both countries. Some issues of concern are raised and an outline for the next year's work is proposed. Issues of concern include the sufficient depth of the assessment, the required competence in assessments, data and criteria problems, definition of the boundaries of the system to be assessed, and the necessary internal support and organisational maturity required for successful assessments. Finally, plans for next year's work are outlined. (au)

Caseload management methods for use within district nursing teams: a literature review.

Science.gov (United States)

Roberson, Carole

2016-05-01

Effective and efficient caseload management requires extensive skills to ensure that patients receive the right care by the right person at the right time. District nursing caseloads are continually increasing in size and complexity, which requires specialist district nursing knowledge and skills. This article reviews the literature related to caseload management with the aim of identifying the most effective method for district nursing teams. The findings from this review are that there are different styles and methods of caseload management. The literature review was unable to identify a single validated tool or method, but identified themes for implementing effective caseload management, specifically caseload analysis; workload measurement; work allocation; service and practice development and workforce planning. This review also identified some areas for further research.

A geometric view on BRST extension of the phase space

International Nuclear Information System (INIS)

Kyuldjiev, A.

1994-11-01

The role of complex polarizations is emphasized as providing coordinate-free approach to creation and annihilation operators needed for particle interpretation. With their help a proposition is made for explanation of BRST extension of the phase space due to fixing to zero the number of particles corresponding to constraint functions. The procedure treats the case when no group action is assumed and does not require any form of supersymmetry. (author). 19 refs

A LiDAR method of canopy structure retrieval for wind modeling of heterogeneous forests

DEFF Research Database (Denmark)

Boudreault, Louis-Etienne; Bechmann, Andreas; Taryainen, Lasse

2015-01-01

and this information is required for each grid point in the three-dimensional computational domain. By using raw data from aerial LiDAR scans together with the Beer-Lambert law, we propose and test a method to calculate and grid highly variable and realistic frontal area density input. An extensive comparison...

Extensible automated dispersive liquid–liquid microextraction

Energy Technology Data Exchange (ETDEWEB)

Li, Songqing; Hu, Lu; Chen, Ketao; Gao, Haixiang, E-mail: hxgao@cau.edu.cn

2015-05-04

Highlights: • An extensible automated dispersive liquid–liquid microextraction was developed. • A fully automatic SPE workstation with a modified operation program was used. • Ionic liquid-based in situ DLLME was used as model method. • SPE columns packed with nonwoven polypropylene fiber was used for phase separation. • The approach was applied to the determination of benzoylurea insecticides in water. - Abstract: In this study, a convenient and extensible automated ionic liquid-based in situ dispersive liquid–liquid microextraction (automated IL-based in situ DLLME) was developed. 1-Octyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]imide ([C{sub 8}MIM]NTf{sub 2}) is formed through the reaction between [C{sub 8}MIM]Cl and lithium bis[(trifluoromethane)sulfonyl]imide (LiNTf{sub 2}) to extract the analytes. Using a fully automatic SPE workstation, special SPE columns packed with nonwoven polypropylene (NWPP) fiber, and a modified operation program, the procedures of the IL-based in situ DLLME, including the collection of a water sample, injection of an ion exchange solvent, phase separation of the emulsified solution, elution of the retained extraction phase, and collection of the eluent into vials, can be performed automatically. The developed approach, coupled with high-performance liquid chromatography–diode array detection (HPLC–DAD), was successfully applied to the detection and concentration determination of benzoylurea (BU) insecticides in water samples. Parameters affecting the extraction performance were investigated and optimized. Under the optimized conditions, the proposed method achieved extraction recoveries of 80% to 89% for water samples. The limits of detection (LODs) of the method were in the range of 0.16–0.45 ng mL{sup −1}. The intra-column and inter-column relative standard deviations (RSDs) were <8.6%. Good linearity (r > 0.9986) was obtained over the calibration range from 2 to 500 ng mL{sup −1}. The proposed

Extensible automated dispersive liquid–liquid microextraction

International Nuclear Information System (INIS)

Li, Songqing; Hu, Lu; Chen, Ketao; Gao, Haixiang

2015-01-01

Highlights: • An extensible automated dispersive liquid–liquid microextraction was developed. • A fully automatic SPE workstation with a modified operation program was used. • Ionic liquid-based in situ DLLME was used as model method. • SPE columns packed with nonwoven polypropylene fiber was used for phase separation. • The approach was applied to the determination of benzoylurea insecticides in water. - Abstract: In this study, a convenient and extensible automated ionic liquid-based in situ dispersive liquid–liquid microextraction (automated IL-based in situ DLLME) was developed. 1-Octyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]imide ([C 8 MIM]NTf 2 ) is formed through the reaction between [C 8 MIM]Cl and lithium bis[(trifluoromethane)sulfonyl]imide (LiNTf 2 ) to extract the analytes. Using a fully automatic SPE workstation, special SPE columns packed with nonwoven polypropylene (NWPP) fiber, and a modified operation program, the procedures of the IL-based in situ DLLME, including the collection of a water sample, injection of an ion exchange solvent, phase separation of the emulsified solution, elution of the retained extraction phase, and collection of the eluent into vials, can be performed automatically. The developed approach, coupled with high-performance liquid chromatography–diode array detection (HPLC–DAD), was successfully applied to the detection and concentration determination of benzoylurea (BU) insecticides in water samples. Parameters affecting the extraction performance were investigated and optimized. Under the optimized conditions, the proposed method achieved extraction recoveries of 80% to 89% for water samples. The limits of detection (LODs) of the method were in the range of 0.16–0.45 ng mL −1 . The intra-column and inter-column relative standard deviations (RSDs) were <8.6%. Good linearity (r > 0.9986) was obtained over the calibration range from 2 to 500 ng mL −1 . The proposed method opens a new avenue

Two-step tunneling technique of deep brain stimulation extension wires-a description.

Science.gov (United States)

Fontaine, Denys; Vandersteen, Clair; Saleh, Christian; von Langsdorff, Daniel; Poissonnet, Gilles

2013-12-01

While a significant body of literature exists on the intracranial part of deep brain stimulation surgery, the equally important second part of the intervention related to the subcutaneous tunneling of deep brain stimulation extension wires is rarely described. The tunneling strategy can consist of a single passage of the extension wires from the frontal incision site to the subclavicular area, or of a two-step approach that adds a retro-auricular counter-incision. Each technique harbors the risk of intraoperative and postoperative complications. At our center, we perform a two-step tunneling procedure that we developed based on a cadaveric study. In 125 consecutive patients operated since 2002, we did not encounter any complication related to our tunneling method. Insufficient data exist to fully evaluate the advantages and disadvantages of each tunneling technique. It is of critical importance that authors detail their tunneling modus operandi and report the presence or absence of complications. This gathered data pool may help to formulate a definitive conclusions on the safest method for subcutaneous tunneling of extension wires in deep brain stimulation.

The Gas Transmission Problem Solved by an Extension of the Simplex Algorithm

OpenAIRE

Daniel De Wolf; Yves Smeers

2000-01-01

The problem of distributing gas through a network of pipelines is formulated as a cost minimization subject to nonlinear flow-pressure relations, material balances, and pressure bounds. The solution method is based on piecewise linear approximations of the nonlinear flow-pressure relations. The approximated problem is solved by an extension of the Simplex method. The solution method is tested on real-world data and compared with alternative solution methods.

Performance of methods for estimation of table beet water requirement in Alagoas

Directory of Open Access Journals (Sweden)

Daniella P. dos Santos

Full Text Available ABSTRACT Optimization of water use in agriculture is fundamental, particularly in regions where water scarcity is intense, requiring the adoption of technologies that promote increased irrigation efficiency. The objective of this study was to evaluate evapotranspiration models and to estimate the crop coefficients of beet grown in a drainage lysimeter in the Agreste region of Alagoas. The experiment was conducted at the Campus of the Federal University of Alagoas - UFAL, in the municipality of Arapiraca, AL, between March and April 2014. Crop evapotranspiration (ETc was estimated in drainage lysimeters and reference evapotranspiration (ETo by Penman-Monteith-FAO 56 and Hargreaves-Samani methods. The Hargreaves-Samani method presented a good performance index for ETo estimation compared with the Penman-Monteith-FAO method, indicating that it is adequate for the study area. Beet ETc showed a cumulative demand of 202.11 mm for a cumulative reference evapotranspiration of 152.00 mm. Kc values determined using the Penman-Monteith-FAO 56 and Hargreaves-Samani methods were overestimated, in comparison to the Kc values of the FAO-56 standard method. With the obtained results, it is possible to correct the equations of the methods for the region, allowing for adequate irrigation management.

Nuclear power plant life extension in the United Kingdom

International Nuclear Information System (INIS)

Goodison, D.; Seddon, J.W.; Pape, E.M.

1991-01-01

The safety cases for the United Kingdom's older nuclear power plant have been reviewed by their utilities in order to justify continued operation of the reactors up to an age of at least 30 year. These 'long term safety reviews' have identified worthwhile plant modifications and aspects where further studies or plant inspections are required. As the plants approach the age of 30 years, 'life extension reviews' are now being undertaken, concentrating on management of ageing, to support operation to at least 40 years. (author)

77 FR 25188 - Extension of Agency Information Collection Activity Under OMB Review: Enhanced Security...

Science.gov (United States)

2012-04-27

... general aviation (GA) aircraft operators who wish to fly into and/or out of Ronald Reagan Washington.... Information Collection Requirement Title: Enhanced Security Procedures at Ronald Reagan Washington National...] Extension of Agency Information Collection Activity Under OMB Review: Enhanced Security Procedures at Ronald...

Juvenile nasopharyngeal angiofibroma with intracranial extension - A review of 29 cases

Directory of Open Access Journals (Sweden)

Varun Jain

2014-01-01

Full Text Available Background: Complete resection has been the preferred treatment for extracranial juvenile nasopharyngeal angiofibromas (JNA but resection of JNA with intracranial extension (ICE can be quite challenging because of the associated risk of extensive haemorrhage. The aim of this study was to assess the neurological outcome of patients undergoing surgery for removal of JNA with ICE and analyse various perioperative anaesthetic factors that could possibly affect the outcome. Materials and Methods: This retrospective study was conducted including patients with JNA with ICE requiring combined otolaryngological and neurosurgical approach for tumour removal at our centre from January 2001 to December 2010. Patient′s medical and anaesthesia records were reviewed and data regarding patient demography, pre-operative investigations, anaesthetic management, post-operative investigations and complications, number of days of intensive care unit (ICU and hospital stay and Glasgow Outcome Scale (GOS at the time of discharge from hospital were collected and reviewed. Results: A total of 29 patients were operated. The median age of presentation was 15 years. Nineteen patients (65.5% had a good GOS of 5 at discharge, 7 (24.1% had moderate outcome with GOS of 4 and 3 patients (10.3% had poor outcome with GOS of ≤3. There was one mortality in our study. Perioperative factors affecting the GOS at discharge were amount of intra-operative blood loss, intra-operative infusion of packed red blood cells (RBCs and colloid and post-operative haemoglobin. Conclusion: The outcome of patients with JNA is affected by intra-operative blood loss and transfusion.

Fingerprint image reconstruction for swipe sensor using Predictive Overlap Method

Directory of Open Access Journals (Sweden)

Mardiansyah Ahmad Zafrullah

2018-01-01

Full Text Available Swipe sensor is one of many biometric authentication sensor types that widely applied to embedded devices. The sensor produces an overlap on every pixel block of the image, so the picture requires a reconstruction process before heading to the feature extraction process. Conventional reconstruction methods require extensive computation, causing difficult to apply to embedded devices that have limited computing process. In this paper, image reconstruction is proposed using predictive overlap method, which determines the image block shift from the previous set of change data. The experiments were performed using 36 images generated by a swipe sensor with 128 x 8 pixels size of the area, where each image has an overlap in each block. The results reveal computation can increase up to 86.44% compared with conventional methods, with accuracy decreasing to 0.008% in average.

76 FR 77850 - Permit-Required Confined Spaces; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2011-12-14

... section. Section 1910.146(k)(2)(iii) requires that the employer train affected employees in basic first... rescue team or service who holds a current certification in first aid and CPR is available. Section 1910...) requires that the employer certify that the training required by paragraphs (g)(1) through (g)(3) has been...

Lifetime extension: what challenges for industrialists?

International Nuclear Information System (INIS)

Cudelou, C.

2014-01-01

Lifetime extension upgrading imposes to compel with ASN (Nuclear Safety Authority) requirements such as: -) to assess the conformity of the installation in a very broad sense by looking for and processing any discrepancy, -) to demonstrate that the facility can face an accident, -) to justify an efficient monitoring of the components that can not be replaced (reactor vessel, containment building), -) to anticipate the replacement of important components like steam generators, -) to study measures for diminishing the thermal and chemical stresses of components, and -) to maintain knowledge and technical competencies. All these requirements are a big challenge for the nuclear industry that will face in the few years to come important tasks. Between 2015 and 2020, it is expected that fifteen 900 MW units and twenty 1300 MW units will have their third decennial outage program. During this period there will also be the second decennial outage program for some 1450 MW units and the first fourth decennial outage program for a 900 MW unit. To succeed in all these challenges, nuclear industry will have to focus on innovation and on a better work organisation. (A.C.)

Extensions of the Standard Model

CERN Document Server

Zwirner, Fabio

1996-01-01

Rapporteur talk at the International Europhysics Conference on High Energy Physics, Brussels (Belgium), July 27-August 2, 1995. This talk begins with a brief general introduction to the extensions of the Standard Model, reviewing the ideology of effective field theories and its practical implications. The central part deals with candidate extensions near the Fermi scale, focusing on some phenomenological aspects of the Minimal Supersymmetric Standard Model. The final part discusses some possible low-energy implications of further extensions near the Planck scale, namely superstring theories.

Life extension of the St. Lucie unit 1 reactor vessel

International Nuclear Information System (INIS)

Rowan, G.A.; Sun, J.B.; Mott, S.L.

1991-01-01

In late 1989, Florida Power and Light Company (FP and L) established the policy that St. Lucie unit 1 should not be prevented from achieving a 60-yr operating life by reactor vessel embrittlement. A 60-yr operating life means that the plant would be allowed to operate until the year 2036, which is 20 years beyond the current license expiration date of 2016. Since modifications to the reactor vessel and its components are projected to be expensive, the desire of FP and L management was to achieve this lifetime extension through the use of fuel management and proven technology. The following limitations were placed on any acceptable method for achieving this lifetime extension capability: low fuel cycle cost; low impact on safety parameters; very little or no operations impact; and use of normal reactor materials. A task team was formed along with the Advanced Nuclear Fuels Company (ANF) to develop a vessel-life extension program

Operational data collection and analysis for nuclear plant life extension

International Nuclear Information System (INIS)

DuCharme, A.R.; Berg, R.M.; Bailey, T.L.

1989-01-01

This paper describes initial work undertaken by the US Department of Energy, through Sandia National Laboratories in Albuquerque, New Mexico, to define the operational data necessary for support of nuclear plant life extension (PLEX) programs. This work is being performed in coordination with the Working Group on Plant Life Extension of the US Nuclear Management and Resources Council. The intent of the effort is to use results gained initially from pilot PLEX programs a US BWR and a US PWR to build towards the use of ''PLEX indicators'' by which a plant's readiness for successful life extension can be measured. Another objective of the study was to examine chemistry data in detail to determine how well US plants are collecting, preserving, and trending the chemistry data that is important to PLEX. The methods used to disseminate this data to outside agencies and other utilities were studied. Finally, an analysis was made to determine additional chemistry data needed to support PLEX

77 FR 46739 - Proposed Extension of Approval of Information Collection; Comment Request-Baby Bouncers and...

Science.gov (United States)

2012-08-06

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Baby Bouncers and Walker-Jumpers AGENCY: Consumer Product Safety Commission. ACTION... information collection requirements for manufacturers and importers of children's articles known as baby...

Building and Managing Makerspaces in Extension

Science.gov (United States)

Francis, Dave; Hill, Paul; Graham, Dallini; Swadley, Emy; Esplin, Kaleb

2017-01-01

As traditional face-to-face Extension office interactions are supplanted by online education options, the makerspace offers a venue for authentic engagement between Extension and the community. In makerspaces, learners make and learn from one another in a cooperative learning environment. Through involvement in the maker movement, Extension has an…

A repository based on a dynamically extensible data model supporting multidisciplinary research in neuroscience

Directory of Open Access Journals (Sweden)

Corradi Luca

2012-10-01

Full Text Available Abstract Background Robust, extensible and distributed databases integrating clinical, imaging and molecular data represent a substantial challenge for modern neuroscience. It is even more difficult to provide extensible software environments able to effectively target the rapidly changing data requirements and structures of research experiments. There is an increasing request from the neuroscience community for software tools addressing technical challenges about: (i supporting researchers in the medical field to carry out data analysis using integrated bioinformatics services and tools; (ii handling multimodal/multiscale data and metadata, enabling the injection of several different data types according to structured schemas; (iii providing high extensibility, in order to address different requirements deriving from a large variety of applications simply through a user runtime configuration. Methods A dynamically extensible data structure supporting collaborative multidisciplinary research projects in neuroscience has been defined and implemented. We have considered extensibility issues from two different points of view. First, the improvement of data flexibility has been taken into account. This has been done through the development of a methodology for the dynamic creation and use of data types and related metadata, based on the definition of “meta” data model. This way, users are not constrainted to a set of predefined data and the model can be easily extensible and applicable to different contexts. Second, users have been enabled to easily customize and extend the experimental procedures in order to track each step of acquisition or analysis. This has been achieved through a process-event data structure, a multipurpose taxonomic schema composed by two generic main objects: events and processes. Then, a repository has been built based on such data model and structure, and deployed on distributed resources thanks to a Grid-based approach

Development of modelling method selection tool for health services management: from problem structuring methods to modelling and simulation methods.

Science.gov (United States)

Jun, Gyuchan T; Morris, Zoe; Eldabi, Tillal; Harper, Paul; Naseer, Aisha; Patel, Brijesh; Clarkson, John P

2011-05-19

There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection.

Improving Disability Awareness among Extension Agents

Science.gov (United States)

Mahadevan, Lakshmi; Peterson, Rick L.; Grenwelge, Cheryl

2014-01-01

Increasing prevalence rates and legislative mandates imply that educators, parents, and Extension agents will need better tools and resources to meet the needs of special populations. The Texas A&M AgriLife Extension Service addresses this issue by using e-learning tools. Extension agents can take advantage of these courses to gain critical…

Extensions of the auxiliary field method to solve Schroedinger equations

International Nuclear Information System (INIS)

Silvestre-Brac, Bernard; Semay, Claude; Buisseret, Fabien

2008-01-01

It has recently been shown that the auxiliary field method is an interesting tool to compute approximate analytical solutions of the Schroedinger equation. This technique can generate the spectrum associated with an arbitrary potential V(r) starting from the analytically known spectrum of a particular potential P(r). In the present work, general important properties of the auxiliary field method are proved, such as scaling laws and independence of the results on the choice of P(r). The method is extended in order to find accurate analytical energy formulae for radial potentials of the form aP(r) + V(r), and several explicit examples are studied. Connections existing between the perturbation theory and the auxiliary field method are also discussed

Extensions of the auxiliary field method to solve Schroedinger equations

Energy Technology Data Exchange (ETDEWEB)

Silvestre-Brac, Bernard [LPSC Universite Joseph Fourier, Grenoble 1, CNRS/IN2P3, Institut Polytechnique de Grenoble, Avenue des Martyrs 53, F-38026 Grenoble-Cedex (France); Semay, Claude; Buisseret, Fabien [Groupe de Physique Nucleaire Theorique, Universite de Mons-Hainaut, Academie universitaire Wallonie-Bruxelles, Place du Parc 20, B-7000 Mons (Belgium)], E-mail: silvestre@lpsc.in2p3.fr, E-mail: claude.semay@umh.ac.be, E-mail: fabien.buisseret@umh.ac.be

2008-10-24

It has recently been shown that the auxiliary field method is an interesting tool to compute approximate analytical solutions of the Schroedinger equation. This technique can generate the spectrum associated with an arbitrary potential V(r) starting from the analytically known spectrum of a particular potential P(r). In the present work, general important properties of the auxiliary field method are proved, such as scaling laws and independence of the results on the choice of P(r). The method is extended in order to find accurate analytical energy formulae for radial potentials of the form aP(r) + V(r), and several explicit examples are studied. Connections existing between the perturbation theory and the auxiliary field method are also discussed.

Quotient semigroups and extension semigroups

Indian Academy of Sciences (India)

Introduction. Abelian groups and semigroups play an important role in the classification of C. ∗. -algebras and their extensions. ... -algebra extension theory and K K-theory, it is crucial to study the theory of quotient semigroups from the ...

An accurate and efficient reliability-based design optimization using the second order reliability method and improved stability transformation method

Science.gov (United States)

Meng, Zeng; Yang, Dixiong; Zhou, Huanlin; Yu, Bo

2018-05-01

The first order reliability method has been extensively adopted for reliability-based design optimization (RBDO), but it shows inaccuracy in calculating the failure probability with highly nonlinear performance functions. Thus, the second order reliability method is required to evaluate the reliability accurately. However, its application for RBDO is quite challenge owing to the expensive computational cost incurred by the repeated reliability evaluation and Hessian calculation of probabilistic constraints. In this article, a new improved stability transformation method is proposed to search the most probable point efficiently, and the Hessian matrix is calculated by the symmetric rank-one update. The computational capability of the proposed method is illustrated and compared to the existing RBDO approaches through three mathematical and two engineering examples. The comparison results indicate that the proposed method is very efficient and accurate, providing an alternative tool for RBDO of engineering structures.

Spacetime extensions Pt. 1

International Nuclear Information System (INIS)

Racz, I.

1991-09-01

The problem of the existence of local extensions of spacetime is considered. It is shown that for a spacetime including an incomplete inextendible non-coiling causal geodesic curve there exists a particular C k (resp. C k- ) local extension provided that the curvature and its covariant derivatives are well behaved up to order k + 1 (resp. k) along a family of causal geodetics (around the chosen one). (R.P.) 15 refs

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures

Science.gov (United States)

Creugers, N. H. J.; Witter, D. J.; Van 't Spijker, A.; Gerritsen, A. E.; Kreulen, C. M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches without extension (n = 74) and with subjects who had worn a mandibular extension removable partial denture in the past (n = 19). Subjects with complete dentitions (n = 72) were controls. Data were collected at baseline and at 3-, 6-, and 9-year observations. Results. Occlusal activity in terms of reported awareness of bruxism and occlusal tooth wear of lower anterior teeth did not differ significantly between the groups. In contrast, occlusal tooth wear of premolars in shortened dental arches with or without extension dentures was significantly higher than in the controls. Differences amongst groups with respect to signs and symptoms related to temporomandibular disorders were not found. Occlusal support of the dentures did not influence anterior spatial relationship. Occlusal contacts of the denture teeth decreased from 70% for second premolars via 50% for first molars, to 30% for second molars. Conclusions. Mandibular distal extension removable partial dentures in moderate shortened dental arches had no effects on occlusion and temporomandibular function. PMID:20671961

Use of dynamic Bayesian networks for life extension assessment of ageing systems

International Nuclear Information System (INIS)

Ramírez, Pedro A. Pérez; Utne, Ingrid Bouwer

2015-01-01

Extending the operating lifetime of ageing technical systems is of great interest for industrial applications. Life extension requires identifying and selecting decision alternatives which allow for a safe and economic operation of the system beyond its design lifetime. This article proposes a dynamic Bayesian network for assessing the life extension of ageing repairable systems. The main objective of the model is to provide decision support based on the system performance during a finite time horizon, which is defined by the life extension period. The model has three main applications: (i) assessing and selecting optimal decision alternatives for the life extension at present time, based on historical data; (ii) identifying and minimizing the factors that have a negative impact on the system performance; and (iii) reassessing and optimizing the decision alternatives during operation throughout the life extension period, based on updating the model with new operational data gathered. A case study illustrates the application of the model for life extension of a real firewater pump system in an oil and gas facility. The case study analyzes three decision alternatives, where preventive maintenance and functional test policies are optimized, and the uncertainty involved in each alternative is computed. - Highlights: • A dynamic Bayesian network is used for predicting the system performance. • The performance is measured with relevant variables: cost; unavailability; safety. • The model can be used when scarce data is available, no degradation data is needed. • The uncertainty associated to each alternative is computed in the model. • A detailed case study of a real safety system shows the applicability of the model

Pelvic movement strategies and leg extension power in patients with end-stage medial compartment knee osteoarthritis

DEFF Research Database (Denmark)

Kierkegaard, Signe; Jørgensen, Peter Bo; Dalgas, Ulrik

2015-01-01

advancing functional tasks, and how these strategies are associated with leg extension power. The aim of the study was to investigate pelvic movement strategies and leg extension power in patients with end-stage medial compartment knee osteoarthritis compared with controls. MATERIALS AND METHODS: 57...... patients (mean age 65.6 years) scheduled for medial uni-compartmental knee arthroplasty, and 29 age and gender matched controls were included in this cross-sectional study. Leg extension power was tested with the Nottingham Leg Extension Power-Rig. Pelvic range of motion was derived from an inertia......-based measurement unit placed over the sacrum bone during walking, stair climbing and stepping. RESULTS: Patients had lower leg extension power than controls (20-39 %, P

A Collaborative Extensible User Environment for Simulation and Knowledge Management

Energy Technology Data Exchange (ETDEWEB)

Freedman, Vicky L.; Lansing, Carina S.; Porter, Ellen A.; Schuchardt, Karen L.; Guillen, Zoe C.; Sivaramakrishnan, Chandrika; Gorton, Ian

2015-06-01

In scientific simulation, scientists use measured data to create numerical models, execute simulations and analyze results from advanced simulators executing on high performance computing platforms. This process usually requires a team of scientists collaborating on data collection, model creation and analysis, and on authorship of publications and data. This paper shows that scientific teams can benefit from a user environment called Akuna that permits subsurface scientists in disparate locations to collaborate on numerical modeling and analysis projects. The Akuna user environment is built on the Velo framework that provides both a rich client environment for conducting and analyzing simulations and a Web environment for data sharing and annotation. Akuna is an extensible toolset that integrates with Velo, and is designed to support any type of simulator. This is achieved through data-driven user interface generation, use of a customizable knowledge management platform, and an extensible framework for simulation execution, monitoring and analysis. This paper describes how the customized Velo content management system and the Akuna toolset are used to integrate and enhance an effective collaborative research and application environment. The extensible architecture of Akuna is also described and demonstrates its usage for creation and execution of a 3D subsurface simulation.

EFAM GTP-CREEP 02 - the GKSS test procedure for determining the creep crack extension of materials

International Nuclear Information System (INIS)

Schwalbe, K.H.

2002-01-01

This document describes a fracture mechanics method in procedural form for determining the creep crack extension of materials. It is based on the unified fracture mechanics test method EFAM GTP 02, the ASTM standard E 1457-98, activities of VAMAS TWA 19, and GKSS experience in creep crack extension testing. It introduces novel features such as the rate of the δ 5 crack tip opening displacement, the crack tip opening angle, and the middle cracked tension specimen. (orig.) [de

Delay generation methods with reduced memory requirements

DEFF Research Database (Denmark)

Tomov, Borislav Gueorguiev; Jensen, Jørgen Arendt

2003-01-01

Modern diagnostic ultrasound beamformers require delay information for each sample along the image lines. In order to avoid storing large amounts of focusing data, delay generation techniques have to be used. In connection with developing a compact beamformer architecture, recursive algorithms were......) For the best parametric approach, the gate count was 2095, the maximum operation speed was 131.9 MHz, the power consumption at 40 MHz was 10.6 mW, and it requires 4 12-bit words for each image line and channel. 2) For the piecewise-linear approximation, the corresponding numbers are 1125 gates, 184.9 MHz, 7...

Closure requirements

International Nuclear Information System (INIS)

Hutchinson, I.P.G.; Ellison, R.D.

1992-01-01

Closure of a waste management unit can be either permanent or temporary. Permanent closure may be due to: economic factors which make it uneconomical to mine the remaining minerals; depletion of mineral resources; physical site constraints that preclude further mining and beneficiation; environmental, regulatory or other requirements that make it uneconomical to continue to develop the resources. Temporary closure can occur for a period of several months to several years, and may be caused by factors such as: periods of high rainfall or snowfall which prevent mining and waste disposal; economic circumstances which temporarily make it uneconomical to mine the target mineral; labor problems requiring a cessation of operations for a period of time; construction activities that are required to upgrade project components such as the process facilities and waste management units; and mine or process plant failures that require extensive repairs. Permanent closure of a mine waste management unit involves the provision of durable surface containment features to protect the waters of the State in the long-term. Temporary closure may involve activities that range from ongoing maintenance of the existing facilities to the installation of several permanent closure features in order to reduce ongoing maintenance. This paper deals with the permanent closure features

The Darwin Core extension for genebanks opens up new opportunities for sharing genebank datasets

Directory of Open Access Journals (Sweden)

Dag Terje Filip Endresen

2012-07-01

Full Text Available Darwin Core (DwC defines a standard set of terms to describe the primary biodiversity data. Primary biodiversity data are data records derived from direct observation of species occurrences in nature or describing specimens in biological collections. The Darwin Core terms can be seen as an extension to the standard Dublin Core metadata terms. The new Darwin Core extension for genebanks declares the additional terms required for describing genebank datasets, and is based on established standards from the plant genetic resources community. The Global Biodiversity Information Facility (GBIF provides an information infrastructure for biodiversity data including a suite of software tools for data publishing, distributed data access, and the capture of biodiversity data. The Darwin Core extension for genebanks is a key component that provides access for the genebanks and the plant genetic resources community to the GBIF informatics infrastructure including the new toolkits for data exchange. This paper provides one of the first examples and guidelines for how to create extensions to the Darwin Core standard.

76 FR 13668 - Respiratory Protection Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2011-03-14

...] Respiratory Protection Standard; Extension of the Office of Management and Budget's (OMB) Approval of... proposal to extend OMB approval of the information collection requirements specified by the Respiratory... Respiratory Protection Standard (29 CFR 1910.134; hereafter, ``the [[Page 13669

Synthetic Self-Healing Methods

Energy Technology Data Exchange (ETDEWEB)

Bello, Mollie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-06-02

Given enough time, pressure, temperature fluctuation, and stress any material will fail. Currently, synthesized materials make up a large part of our everyday lives, and are used in a number of important applications such as; space travel, under water devices, precise instrumentation, transportation, and infrastructure. Structural failure of these material scan lead to expensive and dangerous consequences. In an attempt to prolong the life spans of specific materials and reduce efforts put into repairing them, biologically inspired, self-healing systems have been extensively investigated. The current review explores recent advances in three methods of synthesized self-healing: capsule based, vascular, and intrinsic. Ideally, self-healing materials require no human intervention to promote healing, are capable of surviving all the steps of polymer processing, and heal the same location repeatedly. Only the vascular method holds up to all of these idealities.

Spectrum unfolding by the least-squares methods

International Nuclear Information System (INIS)

Perey, F.G.

1977-01-01

The method of least squares is briefly reviewed, and the conditions under which it may be used are stated. From this analysis, a least-squares approach to the solution of the dosimetry neutron spectrum unfolding problem is introduced. The mathematical solution to this least-squares problem is derived from the general solution. The existence of this solution is analyzed in some detail. A chi 2 -test is derived for the consistency of the input data which does not require the solution to be obtained first. The fact that the problem is technically nonlinear, but should be treated in general as a linear one, is argued. Therefore, the solution should not be obtained by iteration. Two interpretations are made for the solution of the code STAY'SL, which solves this least-squares problem. The relationship of the solution to this least-squares problem to those obtained currently by other methods of solving the dosimetry neutron spectrum unfolding problem is extensively discussed. It is shown that the least-squares method does not require more input information than would be needed by current methods in order to estimate the uncertainties in their solutions. From this discussion it is concluded that the proposed least-squares method does provide the best complete solution, with uncertainties, to the problem as it is understood now. Finally, some implications of this method are mentioned regarding future work required in order to exploit its potential fully

11 CFR 100.55 - Extension of credit.

Science.gov (United States)

2010-01-01

... substantially similar to extensions of credit to nonpolitical debtors that are of similar risk and size of... 11 Federal Elections 1 2010-01-01 2010-01-01 false Extension of credit. 100.55 Section 100.55... Contribution (2 U.S.C. 431(8)) § 100.55 Extension of credit. The extension of credit by any person is a...

Scintigraphic characteristics of experimental myocardial infarct extension

International Nuclear Information System (INIS)

Kronenberg, M.W.; Wooten, N.E.; Friesinger, G.C.; Page, D.L.; Higgins, S.B.; Collins, J.C.; O'Connor, J.L.; Price, R.R.; Brill, A.B.

1979-01-01

Technetium-99m-stannous pyrophosphate scintiphotos were evaluated for diagnosing and quantitating myocardial infarct (MI) extension in sedated dogs. Infarction and extension were produced by serial left anterior descending coronary artery ligations at 0 and 48 hours. We compared serial scintiphoto data with regional myocardial blood flow (MBF) (microsphere technique) and infarct histopathology. In eight control dogs, the scintigraphic MI area was stable at 24, 48, and 72 hours. In each of 11 dogs undergoing extension, the MI area increased after the 48-hour occlusion, averaging a 48.9% increase (p < 0.001). Grossly, most extensions were mixtures of confluent necrosis and moderate (patchy) necrosis. MBF to confluent infarct tissue decreased significantly, allowing the documentation of extension by totaling the grams of newly flow-deprived tissue, but patchy infarct tissue had little flow deprivation, making it difficult to quantitate this type of extension accurately by flow criteria alone. Rarely, extension could be diagnosed using conventional histologic criteria. We concluded that the scintiphoto MI area was related quantitatively to infarct weight in both control and extension. However, it was not possible to determine that an increase in the MI scintiphoto area was an accurate predictor of the degree of extension using independent flow or pathologic criteria

75 FR 17041 - Extension of the Compliance Date for Cockpit Voice Recorder and Digital Flight Data Recorder...

Science.gov (United States)

2010-04-05

..., including the wiring requirements for CVRs and DFDRs; 25-hour solid state memory DFDRs; two- hour solid state memory CVRs; the CVR and DFDR housing requirements; and the ten-minute backup power source for... manufacturer stated that it had been ready to supply equipment and that an extension would serve as a reward to...

21 CFR 111.320 - What requirements apply to laboratory methods for testing and examination?

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What requirements apply to laboratory methods for testing and examination? 111.320 Section 111.320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING...

75 FR 44288 - Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of...

Science.gov (United States)

2010-07-28

...] Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of... requirements specified in the Standard on Overhead and Gantry Cranes (29 CFR 1910.179). DATES: Comments must be... requirements for: Marking the rated load of cranes; preparing certification records to verify the inspection of...

77 FR 55812 - Proposed Extension of Approval of Information Collection; Comment Request-Baby Bouncers and...

Science.gov (United States)

2012-09-11

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0038] Proposed Extension of Approval of Information Collection; Comment Request--Baby Bouncers and Walker-Jumpers AGENCY: Consumer Product Safety... collection requirements for manufacturers and importers of children's articles known as baby-bouncers and...

Universal extensions to simulate specifications

NARCIS (Netherlands)

Hesselink, Wim H.

A previous paper introduced eternity variables as an alternative to the prophecy variables of Abadi and Lamport and proved the formalism to be semantically complete: every simulation F. K -> L that preserves quiescence contains a composition of a history extension, an extension with eternity

Why Do Extension Agents Resign?

Science.gov (United States)

Manton, Linda Nunes; van Es, J. C.

1985-01-01

Past and current Illinois extension agents were surveyed via mail questionnaires as to reasons for staying or leaving extension programs. Reasons for leaving included family changes, family moves, opportunity to advance, better salary/benefits, dissatisfaction with administration, and too much time away from family. (CT)

Bio-Engineering tissue and V.A.C. therapy: A new method for the treatment of extensive necrotizing infection in the diabetic foot.

Science.gov (United States)

Armenio, Andrea; Cutrignelli, Daniela Anna; Nardulli, Maria Luisa; Maggio, Giulio; Memeo, Giuseppe; De Santis, Valerio; Giudice, Giuseppe; Ressa, Cosmo Maurizio

2017-01-01

The aim of the study is to compare the standard care for progressive necrotizing infection in diabetic foot with a treatment protocol based on the association between autologous fibroblast grafts and vacuum-assisted closure therapy (V.A.C.). A retrospective matched Case-Control study was carried out on 20 patients with diabetic foot infection, 10 treated with the standard care and 10 with our new protocol. Inclusion criteria were: acute diabetic foot necrosis (Wagner III and IV), ulcer size (30 to 80 cm2), tendon and bone exposure. Success in the treatment was evaluated as: percentage of healing at the 20th week, time of healing, deambulation, recurrence and major amputation rate. A 90% healing rate was observed after 20 weeks in the study group, compared to a 28.6% in the control group. The recurrence rate in the treated areas was 20% in the study group and 100% in the control group. None of the patients in either group required major amputations. We achieved very promising results by associating autologous fibroblasts grafts and V.A.C. therapy, in comparison with standard care. V.A.C. therapy seems to improve the growth rate of the fibroblasts, probably by sealing the wound and providing a moist environment following the fibroblast graft. The improved neoangiogenesis of the neo-dermis could explain the reduced recurrence rate of the study group. Despite the low number of patients involved and the retrospective nature of the analysis, this study showed a reliable, safe and cost-effective method of treating extensive infection in the diabetic foot. Bio-Engineered Tissue, Diabetic foot, Fibroblast graft, V.A.C.

State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

International Nuclear Information System (INIS)

DuCharme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.

1988-01-01

As part of the IEEE Working Group 3.4 on Nuclear Plant Life Extension, an assessment is made of the current state of technology for the life extension of certain classes of electrical and IandC equipment. The classes investigated include motors, cables, emergency diesel generators, penetrations, inverters/chargers, switchgear, and reactor protection systems. The work is focussed on assessment of current or recently completed RandD efforts to resolve issues affecting life extension of the equipment. Aspects discussed include the degree of resolution of these issues, potentially affected standards, and technical aspects requiring further research. 15 refs., 2 tabs

State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

International Nuclear Information System (INIS)

Du Charme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.