FODEM: A Multi-Threaded Research and Development Method for Educational Technology

Science.gov (United States)

Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

2012-01-01

Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

An overview: origins and development of green chemistry

NARCIS (Netherlands)

Linthorst, J.A.

2009-01-01

This article provides an overview of the origins and development of green chemistry. Aiming to contribute to the understanding of green chemistry, basically from a historical point of view, this overview argues that contextual influences and the user friendliness of the term are drivers for the

Low-energy positron beams - origins, developments and applications

International Nuclear Information System (INIS)

Beling, C.D.; Charlton, M.

1987-01-01

Over the last 15 years there have been rapid advances in the technology associated with low-energy positron beams. The origins of these advances, and some of the major developments, are discussed. Some applications from the diverse fields of surface physics, atomic scattering and positronium studies are highlighted. (author)

Trace analysis of three fungicides in animal origin foods with a modified QuEChERS method and liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Mu, Zhaobin; Feng, Xiaoxiao; Zhang, Yun; Zhang, Hongyan

2016-02-01

A multi-residue method based on modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) sample preparation, followed by liquid chromatography tandem mass spectrometry (LC-MS/MS), was developed and validated for the determination of three selected fungicides (propiconazole, pyraclostrobin, and isopyrazam) in seven animal origin foods. The overall recoveries at the three spiking levels of 0.005, 0.05, and 0.5 mg kg(-1) spanned between 72.3 and 101.4% with relative standard deviation (RSD) values between 0.7 and 14.9%. The method shows good linearity in the concentrations between 0.001 and 1 mg L(-1) with the coefficient of determination (R (2)) value >0.99 for each target analyte. The limit of detections (LODs) for target analytes were between 0.04 and 1.26 μg kg(-1), and the limit of quantifications (LOQs) were between 0.13 and 4.20 μg kg(-1). The matrix effect for each individual compound was evaluated through the study of ratios of the areas obtained in solvent and matrix standards. The optimized method provided a negligible matrix effect for propiconazole within 20%, whereas for pyraclostrobin and isopyrazam, the matrix effect was relatively significant with a maximum value of 49.8%. The developed method has been successfully applied to the analysis of 210 animal origin samples obtained from 16 provinces of China. The results suggested that the developed method was satisfactory for trace analysis of three fungicides in animal origin foods.

Pathways to Lean Software Development: An Analysis of Effective Methods of Change

Science.gov (United States)

Hanson, Richard D.

2014-01-01

This qualitative Delphi study explored the challenges that exist in delivering software on time, within budget, and with the original scope identified. The literature review identified many attempts over the past several decades to reform the methods used to develop software. These attempts found that the classical waterfall method, which is…

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

Science.gov (United States)

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

Law and Islamic finance: How legal origins affect Islamic finance development?

Directory of Open Access Journals (Sweden)

Rihab Grassa

2014-09-01

Full Text Available Many researchers have shown that differences in legal origin explain differences in financial development. Using historical comparisons and cross-country regressions for 30 countries observed for the period from 2005 to 2010, this study tried to assess if different legal origins impacted on the development of Islamic finance. More particularly, this paper tried to assess empirically why and how Shari'a Law's legal origins adopted wholly or partially (combined with Common or Civil Law could explain the level of development of Islamic finance in different jurisdictions. Firstly, we found that countries adopting a Shari'a legal system had a very well developed Islamic financial system. Secondly, we found that countries, adopting a mixed legal system based on Common Law and Shari'a Law, were characterized by the flexibility of their legal systems to make changes to their laws in response to the changing socioeconomic conditions and that these helped the development of the Islamic financial industry. However, we found that countries, adopting a mixed legal system based on both Civil Law and Shari'a Law, were less flexible in making changes to their old laws and this thwarted the development of the Islamic financial industry in these countries. Thirdly, we found that the concentration of Muslim population (the percentage of Muslim population had a positive effect on the development of the Islamic banking system. Also, the level of income had a positive and significant effect on the development of Islamic banking.

Origin and development of comets

International Nuclear Information System (INIS)

Kresak, L.

1989-01-01

The comets are the most primitive and probably also the oldest members of the solar system. Comet cores are brittle bodies of an irregular shape and of a size of 1 to 10 km whose main component is ice. Around 130 comets move along short-period paths whose aphelia are concentrated in the area of Jupiter. They are in the last stage of development. About 20 comets have periods of 20 to 200 years and feature higher motion stability. Roughly 180 comets have elliptical orbits of a period exceeding 200 years, 200 comets have parabolic and 120 comets have hyperbolic orbits. The most distant comets form the Oort cloud around the solar system consisting of about one billion comets. Comets originated roughly 4.6 thousand million years ago together with planets, probably inside the Oort cloud. (M.D.). 11 figs

Translanguaging: Origins and Development from School to Street and beyond

Science.gov (United States)

Lewis, Gwyn; Jones, Bryn; Baker, Colin

2012-01-01

The article traces the Welsh origins of "translanguaging" from the 1980s to the recent global use, analysing the development and extension of the term. It suggests that the growing popularity of the term relates to a change in the way bilingualism and multilingualism have ideologically developed not only among academics but also amid…

Original Thinking

Directory of Open Access Journals (Sweden)

Ashok Natarajan

2012-04-01

Full Text Available History that comes to us as a chronology of events is really a collective existence that is evolving through several stages to develop Individuality in all members of the society. The human community, nation states, linguistic groups, local castes and classes, and families are the intermediate stages in development of the Individual. The social process moves through phases of survival, growth, development and evolution. In the process it organizes the consciousness of its members at successive levels from social external manners, formed behavior, value-based character and personality to culminate in the development of Individuality. Through this process, society evolves from physicality to Mentality. The power of accomplishment in society and its members develops progressively through stages of skill, capacity, talent, and ability. Original thinking is made possible by the prior development of thinking that organizes facts into information. The immediate result of the last world war was a shift in reliance from physical force and action to mental conception and mental activity on a global scale. At such times no problem need defy solution, if only humanity recognizes the occasion for thinking and Original Thinking. The apparently insoluble problems we confront are an opportunity to formulate a comprehensive theory of social evolution. The immediate possibility is to devise complete solutions to all existing problems, if only we use the right method of thought development.

Development of a general method for photovoltaic system analysis

Energy Technology Data Exchange (ETDEWEB)

Nolay, P

1987-01-01

The photovoltaic conversion for energetic applications is now widely used, but its development still needs the resolution of many problems for the sizing and for the real working of the installations. The precise analysis of the components and whole system behaviour has led to the development of accurate models for the simulation of such systems. From this modelling phase, a simulation code has been built. The validation of this software has been achieved from experimental test measurements. Since the quality of the software depends on the precision of the input data, an original method of determination of component characteristics, by means of model identification, has been developed. These tools permit the prediction of system behaviour and the dynamic simulation of systems under real conditions. Used for the study of photovoltaic system sizing, this software has allowed the definition of new concepts which will serve as a basis for the development of a sizing method.

The origins of Western mind-body exercise methods.

Science.gov (United States)

Hoffman, Jonathan; Gabel, C Philip

2015-11-02

Background: Over recent decades, mind-body exercise methods have gained international popularity and importance in the management of musculoskeletal disorders. Objectives: The scope of this paper was to investigate: the origins of Western mind-body methods, their philosophies, exercises, and relationship with mainstream healthcare over the last two centuries. Major findings: Within a few decades of the turn of the 20th century, a cluster of mind-body exercise methods emerged from at least six pioneering founders: Checkley, Müller, Alexander, Randell, Pilates, and Morris. Each was based upon a similar exercise philosophy and similar functional movement-harmonizing exercises. This renaissance of independent mind-body schools occurred in parallel with the demise of the 18th and 19th century gymnasium Physical Culture movement and the concurrent emergence of bodybuilding and strength training. Even though mostly forgotten today, Western mind-body exercise methods enjoyed celebrated success during the first half of the 20th century, were hailed by medical and allied health practitioners and practiced by millions from society's elite to deprived minorities. Conclusions: Rediscovering the Western mind-body exercise movement is hoped to facilitate official healthcare establishment recognition of this kind of training as an integral entity. This may widen research opportunities and consolidate approaches toward: optimal musculoskeletal rehabilitation and injury prevention, promotion of a healthy active lifestyle environment in the modern world, and enhancement of the natural pain-free human athletic look, feel, and performance.

CASE METHOD: THE STORY OF THE DEVELOPMENT AND USE OF THE METHOD IN EDUCATION

Directory of Open Access Journals (Sweden)

Светлана Юрьевна Грузкова

2013-08-01

Full Text Available This article deals with the history of origin and issue of case-study method (of a кейс-method in the practice of professional education, which is based on case studies. The distinctive feature of the case-study method is to create a problematic situation on the basis of the facts of real life. As a method, analysis of situations-has become widespread in the world in the 70-80 years, in the same period, he became known in the USSR. This method was used at the beginning, when training managers mainly economic universities to form the students ' ability to make decisions. It is connected with the changes taking place in the economy, because at that time, it has generated substantial reform demand for specialists who know how to act in situations of uncertainty, high risk specialists who can analyze and make decisions. On the one hand, as the authors note, the wide dissemination of this method in education due to its orientation, so that the case method is focused not so much on the development of specific knowledge or skills, as on the development of the common intellectual and communicative capacity of the trainee and the training. In addition, the case method is quite effective in training, he can be connected easily enough with other learning methods. On the other hand, have been certain difficulties in introducing the case-study method in the practice of professional education: general orientation for the development of education and development of the quality requirements for surface treatment, specialist teachers to the methodological basis for the other method.DOI: http://dx.doi.org/10.12731/2218-7405-2013-6-24

Development of Molecular Markers for Determining Continental Origin of Wood from White Oaks (Quercus L. sect. Quercus.

Directory of Open Access Journals (Sweden)

Hilke Schroeder

Full Text Available To detect and avoid illegal logging of valuable tree species, identification methods for the origin of timber are necessary. We used next-generation sequencing to identify chloroplast genome regions that differentiate the origin of white oaks from the three continents; Asia, Europe, and North America. By using the chloroplast genome of Asian Q. mongolica as a reference, we identified 861 variant sites (672 single nucleotide polymorphisms (SNPs; 189 insertion/deletion (indel polymorphism from representative species of three continents (Q. mongolica from Asia; Q. petraea and Q. robur from Europe; Q. alba from North America, and we identified additional chloroplast polymorphisms in pools of 20 individuals each from Q. mongolica (789 variant sites and Q. robur (346 variant sites. Genome sequences were screened for indels to develop markers that identify continental origin of oak species, and that can be easily evaluated using a variety of detection methods. We identified five indels and one SNP that reliably identify continent-of-origin, based on evaluations of up to 1078 individuals representing 13 white oak species and three continents. Due to the size of length polymorphisms revealed, this marker set can be visualized using capillary electrophoresis or high resolution gel (acrylamide or agarose electrophoresis. With these markers, we provide the wood trading market with an instrument to comply with the U.S. and European laws that require timber companies to avoid the trade of illegally harvested timber.

Evolutionary origins and early development of number processing

CERN Document Server

Geary, David C; Mann Koepke, Kathleen

2014-01-01

The first volume in this ground-breaking series focuses on the origins and early development of numerical cognition in non-human primates, lower vertebrates, human infants, and preschool children. The text will help readers understand the nature and complexity of these foundational quantitative concepts and skills along with evolutionary precursors and early developmental trajectories. Brings together and focuses the efforts and research of multiple disciplines working in math cognition.The contributors bring vast knowledge and experience to bear on resolving extant

How the challenge of explaining learning influenced the origins and development of John B. Watson's behaviorism.

Science.gov (United States)

Rilling, M

2000-01-01

Before he invented behaviorism, John B. Watson considered learning one of the most important topics in psychology. Watson conducted excellent empirical research on animal learning. He developed behaviorism in part to promote research and elevate the status of learning in psychology. Watson was much less successful in the adequacy and originality of the mechanisms he proposed to explain learning. By assimilating the method of classical conditioning and adopting Pavlov's theory of stimulus substitution, Watson linked behaviorism with a new method that could compete with both Titchener's method of introspection and Freud's methods of psychoanalysis. Watson's interest in explaining psychopathology led to the discovery of conditioned emotional responses and a behavioristic explanation for the learning of phobic behavior. Watson established learning as a central topic for basic research and application in American psychology.

Cooperative method development

DEFF Research Database (Denmark)

Dittrich, Yvonne; Rönkkö, Kari; Eriksson, Jeanette

2008-01-01

The development of methods tools and process improvements is best to be based on the understanding of the development practice to be supported. Qualitative research has been proposed as a method for understanding the social and cooperative aspects of software development. However, qualitative...... research is not easily combined with the improvement orientation of an engineering discipline. During the last 6 years, we have applied an approach we call `cooperative method development', which combines qualitative social science fieldwork, with problem-oriented method, technique and process improvement....... The action research based approach focusing on shop floor software development practices allows an understanding of how contextual contingencies influence the deployment and applicability of methods, processes and techniques. This article summarizes the experiences and discusses the further development...

Development of large scale fusion plasma simulation and storage grid on JAERI Origin3800 system

International Nuclear Information System (INIS)

Idomura, Yasuhiro; Wang, Xin

2003-01-01

Under the Numerical EXperiment of Tokamak (NEXT) research project, various fluid, particle, and hybrid codes have been developed. These codes require a computational environment which consists of high performance processors, high speed storage system, and high speed parallelized visualization system. In this paper, the performance of the JAERI Origin3800 system is examined from a point of view of these requests. In the performance tests, it is shown that the representative particle and fluid codes operate with 15 - 40% of processing efficiency up to 512 processors. A storage area network (SAN) provides high speed parallel data transfer. A parallel visualization system enables order to magnitude faster visualization of a large scale simulation data compared with the previous graphic workstations. Accordingly, an extremely advanced simulation environment is realized on the JAERI Origin3800 system. Recently, development of a storage grid is underway in order to improve a computational environment of remote users. The storage grid is constructed by a combination of SAN and a wavelength division multiplexer (WDM). The preliminary tests show that compared with the existing data transfer methods, it enables dramatically high speed data transfer ∼100 Gbps over a wide area network. (author)

Metasynthesis: An Original Method to Synthesize Qualitative Literature in Psychiatry

Directory of Open Access Journals (Sweden)

Jonathan Lachal

2017-12-01

Full Text Available BackgroundMetasynthesis—the systematic review and integration of findings from qualitative studies—is an emerging technique in medical research that can use many different methods. Nevertheless, the method must be appropriate to the specific scientific field in which it is used. The objective is to describe the steps of a metasynthesis method adapted from Thematic Synthesis and phenomenology to fit the particularities of psychiatric research.MethodWe detail each step of the method used in a metasynthesis published in 2015 on adolescent and young adults suicidal behaviors. We provide clarifications in several methodological points using the latest literature on metasyntheses. The method is described in six steps: define the research question and the inclusion criteria, select the studies, assess their quality, extract and present the formal data, analyze the data, and express the synthesis.ConclusionMetasyntheses offer an appropriate balance between an objective framework, a rigorously scientific approach to data analysis and the necessary contribution of the researcher’s subjectivity in the construction of the final work. They propose a third level of comprehension and interpretation that brings original insights, improve the global understanding in psychiatry, and propose immediate therapeutic implications. They should be included in the psychiatric common research toolkit to become better recognized by clinicians and mental health professionals.

Mapping replication origins in yeast chromosomes.

Science.gov (United States)

Brewer, B J; Fangman, W L

1991-07-01

The replicon hypothesis, first proposed in 1963 by Jacob and Brenner, states that DNA replication is controlled at sites called origins. Replication origins have been well studied in prokaryotes. However, the study of eukaryotic chromosomal origins has lagged behind, because until recently there has been no method for reliably determining the identity and location of origins from eukaryotic chromosomes. Here, we review a technique we developed with the yeast Saccharomyces cerevisiae that allows both the mapping of replication origins and an assessment of their activity. Two-dimensional agarose gel electrophoresis and Southern hybridization with total genomic DNA are used to determine whether a particular restriction fragment acquires the branched structure diagnostic of replication initiation. The technique has been used to localize origins in yeast chromosomes and assess their initiation efficiency. In some cases, origin activation is dependent upon the surrounding context. The technique is also being applied to a variety of eukaryotic organisms.

The detectability of the origin of the inferior phrenic artery by paging method on multidetector-row CT angiography

International Nuclear Information System (INIS)

Terayama, Koshi

2005-01-01

We evaluated the ability to detect the origin of the inferior phrenic artery (IPA) by paging method on multidetector-row computed tomography (CT) angiography. In 104 patients who underwent multidetector-row CT, detectability of the origin of the IPA was assessed. In addition, in 30 patients in whom arteriographic study was performed, the IPA findings on multidetector-row CT were compared with those on arteriography. In 100 patients (96%) the origin of the right IPA was demonstrated with multidetector-row CT and in 93 patients (89%) the origin of the left IPA was demonstrated. CT angiographic findings concurred with arteriographic findings in all 30 patients (100%) who underwent arteriographic study. In conclusion, paging method on multidetector-row CT angiography provides valuable anatomical information regarding IPA. (author)

Development and Tissue Origins of the Mammalian Cranial Base

Science.gov (United States)

Iseki, S.; Bamforth, S. D.; Olsen, B. R.; Morriss-Kay, G. M.

2008-01-01

The vertebrate cranial base is a complex structure composed of bone, cartilage and other connective tissues underlying the brain; it is intimately connected with development of the face and cranial vault. Despite its central importance in craniofacial development, morphogenesis and tissue origins of the cranial base have not been studied in detail in the mouse, an important model organism. We describe here the location and time of appearance of the cartilages of the chondrocranium. We also examine the tissue origins of the mouse cranial base using a neural crest cell lineage cell marker, Wnt1-Cre/R26R, and a mesoderm lineage cell marker, Mesp1-Cre/R26R. The chondrocranium develops between E11 and E16 in the mouse, beginning with development of the caudal (occipital) chondrocranium, followed by chondrogenesis rostrally to form the nasal capsule, and finally fusion of these two parts via the midline central stem and the lateral struts of the vault cartilages. X-Gal staining of transgenic mice from E8.0 to 10 days post-natal showed that neural crest cells contribute to all of the cartilages that form the ethmoid, presphenoid, and basisphenoid bones with the exception of the hypochiasmatic cartilages. The basioccipital bone and non-squamous parts of the temporal bones are mesoderm derived. Therefore the prechordal head is mostly composed of neural crest-derived tissues, as predicted by the New Head Hypothesis. However, the anterior location of the mesoderm-derived hypochiasmatic cartilages, which are closely linked with the extra-ocular muscles, suggests that some tissues associated with the visual apparatus may have evolved independently of the rest of the “New Head”. PMID:18680740

Development of Methods and Equipment for Sheet Stamping

Science.gov (United States)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

[Influence of different processing methods on Angelica sinensis polysaccharides from same origin].

Science.gov (United States)

Lv, Jieli; Chen, Hongli; Duan, Jinao; Yan, Hui; Tang, Yuping; Song, Bingsheng

2011-04-01

To study the influences of different processing methods on the content of Angelica sinensis polysaccharides (APS) from the same origin. The contents of neutral polysaccharides and acidic polysaccharides in various samples of A. sinensis were determined by phenol-sulfuric acid and carbazole-sulfuric acid method, respectively. The proliferation ability of lymphocyte was detected by MTT method after the cells were cultured with different concentrations of APS from two samples processed by different methods. The different processing methods had different effects on the contents of polysaccharide. The maximum content of APS (26.03%) was found in the sample processed by microwave drying medium-fired, but the minimum content of APS (2.25%) was found in the sample processed by vacuum drying at 50 TC. Furthermore, the APS (high concentration group, P methods have different effects on the contents of APS and the proliferation ability of lymphocytes.

Spectroscopy methods for identifying the country of origin

Science.gov (United States)

Hondrogiannis, Ellen; Ehrlinger, Erin; Miziolek, Andrzej W.

2013-05-01

There is a need in many industries and government functions to identify the source of origin for various materials. For example, the food industry needs to ensure that the claimed source of some of the food products (e.g. coffee, spices) are in fact legitimate due to the variation of quality from different source locations world-wide. Another example is to identify the source country for imported commodities going through Customs so as to assess the correct tariff which varies depending on the source country. Laser Induced Breakdown Spectroscopy (LIBS) holds promise for being a field-portable tool for rapid identification of the country of origin of various materials. Recent research at Towson University has identified the elemental markers needed for discrimination of select spices back to their country of origin using wavelength dispersive X-ray fluorescence (WDXRF). The WDXRF device, however, is not particularly suitable for convenient and fast field analysis. We are extending this study to evaluate the potential of a benchtop commercial LIBS device that could be located at ports of entry and to compare its performance with WDXRF. Our initial study on the spice cumin has demonstrated that discriminant function models can not only be created with 100% separation between the 4 countries of origin (China, India, Syria, and Turkey), but also when tested they show 100% correct matching to the country of origin. This study adds to the growing number of publications that indicate the power of LIBS elemental fingerprinting for provenance determinations.

A study of muscular tissue of animal origin by reflection-spectroscopy methods

Science.gov (United States)

Plotnikova, L. V.; Nechiporenko, A. P.; Orekhova, S. M.; Plotnikov, P. P.; Ishevskii, A. L.

2017-06-01

A comparative analysis of the spectral characteristics of the surface of muscular tissue of animal origin (pork) and its main components has been performed by the methods of diffuse reflection electronic spectroscopy (DRES) and frustrated total internal reflection IR spectroscopy. The experiments have shown that the application of the DRES method makes it possible to detect more pronounced changes in the surface optical characteristics of muscular tissue and obtain electronic spectra containing information about the component composition of its main parts under successive extraction of sarcoplasmic materials, myofibrillar proteins of the actomyosin complex, and stroma mucopolysaccharides.

Origin discrimination and quality evaluation of Gastrodiae rhizoma ...

African Journals Online (AJOL)

Purpose: To develop a high-performance liquid chromatography (HPLC) fingerprint method for the quality control and origin discrimination of Gastrodiae rhizoma. Methods: Twelve batches of G. rhizoma collected from Sichuan, Guizhou and Shanxi provinces in china were used to establish the fingerprint.

Mechanical origins of rightward torsion in early chick brain development

Science.gov (United States)

Chen, Zi; Guo, Qiaohang; Dai, Eric; Taber, Larry

2015-03-01

During early development, the neural tube of the chick embryo undergoes a combination of progressive ventral bending and rightward torsion. This torsional deformation is one of the major organ-level left-right asymmetry events in development. Previous studies suggested that bending is mainly due to differential growth, however, the mechanism for torsion remains poorly understood. Since the heart almost always loops rightwards that the brain twists, researchers have speculated that heart looping affects the direction of brain torsion. However, direct evidence is lacking, nor is the mechanical origin of such torsion understood. In our study, experimental perturbations show that the bending and torsional deformations in the brain are coupled and that the vitelline membrane applies an external load necessary for torsion to occur. Moreover, the asymmetry of the looping heart gives rise to the chirality of the twisted brain. A computational model and a 3D printed physical model are employed to help interpret these findings. Our work clarifies the mechanical origins of brain torsion and the associated left-right asymmetry, and further reveals that the asymmetric development in one organ can induce the asymmetry of another developing organ through mechanics, reminiscent of D'Arcy Thompson's view of biological form as ``diagram of forces''. Z.C. is supported by the Society in Science - Branco Weiss fellowship, administered by ETH Zurich. L.A.T acknowledges the support from NIH Grants R01 GM075200 and R01 NS070918.

The Biblicism of the Korean Protestant churches: Its origin and early development

Directory of Open Access Journals (Sweden)

Jae-Buhm Hwang

2016-09-01

Full Text Available The purpose of this article is to clarify the origin and early stages of the Biblicism of the Korean Protestant churches in general, and of the Presbyterian Church of Korea (PCK in particular. The Biblicism is very important for Korean Protestant churches, because it is believed to be a main cause of their unusual growth on the one hand, and on the other hand, of their Fundamentalism and many schisms in the post-liberation era. The article, in the beginning part, investigates the four crucial elements of Korean Biblicism and then examines how the four elements worked together to form a resilient Biblicism whose two distinctive theological forms were practical on the one hand, and dogmatic (fundamentalist, on the other. Among the four basic Biblicist elements, the first was the firm Biblicist theology of the early North American missionaries in Korea who tried to follow and flower their original, puritanical and Old Princeton theology in Korea. The second was Korean Protestants’ original, Neo-Confucian biblicism, which facilitated them to readily accept the missionaries’ Biblicist teachings of the Bible. The third element was the so-called Nevius [Mission] Methods, which emphasised simplistic Biblicist Bible studies, and offered both opportunities of learning and ways to become meaningful leaders in their communities. The fourth and last element was the Biblicist creed of PCK, which became the fundamentalist weapon against its modernist or liberalist wing. To sum up, Korean Biblicism has been the result of those four Biblicist elements working together. The Korean Biblicism was developed into two more or less different positions; the one being practical, exemplified by Rev. Samuel A. Moffett; and the other, dogmatic and fundamentalist, represented by Rev. Dr W.D. Reynolds.

The Biblicism of the Korean Protestant churches: Its origin and early development

Directory of Open Access Journals (Sweden)

Jae-Buhm Hwang

2016-04-01

Full Text Available The purpose of this article is to clarify the origin and early stages of the Biblicism of the Korean Protestant churches in general, and of the Presbyterian Church of Korea (PCK in particular. The Biblicism is very important for Korean Protestant churches, because it is believed to be a main cause of their unusual growth on the one hand, and on the other hand, of their Fundamentalism and many schisms in the post-liberation era. The article, in the beginning part, investigates the four crucial elements of Korean Biblicism and then examines how the four elements worked together to form a resilient Biblicism whose two distinctive theological forms were practical on the one hand, and dogmatic (fundamentalist, on the other. Among the four basic Biblicist elements, the first was the firm Biblicist theology of the early North American missionaries in Korea who tried to follow and flower their original, puritanical and Old Princeton theology in Korea. The second was Korean Protestants’ original, Neo-Confucian biblicism, which facilitated them to readily accept the missionaries’ Biblicist teachings of the Bible. The third element was the so-called Nevius [Mission] Methods, which emphasised simplistic Biblicist Bible studies, and offered both opportunities of learning and ways to become meaningful leaders in their communities. The fourth and last element was the Biblicist creed of PCK, which became the fundamentalist weapon against its modernist or liberalist wing. To sum up, Korean Biblicism has been the result of those four Biblicist elements working together. The Korean Biblicism was developed into two more or less different positions; the one being practical, exemplified by Rev. Samuel A. Moffett; and the other, dogmatic and fundamentalist, represented by Rev. Dr W.D. Reynolds.

Pathways to lean software development: An analysis of effective methods of change

Science.gov (United States)

Hanson, Richard D.

This qualitative Delphi study explored the challenges that exist in delivering software on time, within budget, and with the original scope identified. The literature review identified many attempts over the past several decades to reform the methods used to develop software. These attempts found that the classical waterfall method, which is firmly entrenched in American business today was to blame for this difficulty (Chatterjee, 2010). Each of these proponents of new methods sought to remove waste, lighten out the process, and implement lean principles in software development. Through this study, the experts evaluated the barriers to effective development principles and defined leadership qualities necessary to overcome these barriers. The barriers identified were issues of resistance to change, risk and reward issues, and management buy-in. Thirty experts in software development from several Fortune 500 companies across the United States explored each of these issues in detail. The conclusion reached by these experts was that visionary leadership is necessary to overcome these challenges.

Development of analytical methods for the separation of plutonium, americium, curium and neptunium from environmental samples

Energy Technology Data Exchange (ETDEWEB)

Salminen, S.

2009-07-01

In this work, separation methods have been developed for the analysis of anthropogenic transuranium elements plutonium, americium, curium and neptunium from environmental samples contaminated by global nuclear weapons testing and the Chernobyl accident. The analytical methods utilized in this study are based on extraction chromatography. Highly varying atmospheric plutonium isotope concentrations and activity ratios were found at both Kurchatov (Kazakhstan), near the former Semipalatinsk test site, and Sodankylae (Finland). The origin of plutonium is almost impossible to identify at Kurchatov, since hundreds of nuclear tests were performed at the Semipalatinsk test site. In Sodankylae, plutonium in the surface air originated from nuclear weapons testing, conducted mostly by USSR and USA before the sampling year 1963. The variation in americium, curium and neptunium concentrations was great as well in peat samples collected in southern and central Finland in 1986 immediately after the Chernobyl accident. The main source of transuranium contamination in peats was from global nuclear test fallout, although there are wide regional differences in the fraction of Chernobyl-originated activity (of the total activity) for americium, curium and neptunium. The separation methods developed in this study yielded good chemical recovery for the elements investigated and adequately pure fractions for radiometric activity determination. The extraction chromatographic methods were faster compared to older methods based on ion exchange chromatography. In addition, extraction chromatography is a more environmentally friendly separation method than ion exchange, because less acidic waste solutions are produced during the analytical procedures. (orig.)

Development and Implementation of Efficiency-Improving Analysis Methods for the SAGE III on ISS Thermal Model Originating

Science.gov (United States)

Liles, Kaitlin; Amundsen, Ruth; Davis, Warren; Scola, Salvatore; Tobin, Steven; McLeod, Shawn; Mannu, Sergio; Guglielmo, Corrado; Moeller, Timothy

2013-01-01

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument is the fifth in a series of instruments developed for monitoring aerosols and gaseous constituents in the stratosphere and troposphere. SAGE III will be delivered to the International Space Station (ISS) via the SpaceX Dragon vehicle in 2015. A detailed thermal model of the SAGE III payload has been developed in Thermal Desktop (TD). Several novel methods have been implemented to facilitate efficient payload-level thermal analysis, including the use of a design of experiments (DOE) methodology to determine the worst-case orbits for SAGE III while on ISS, use of TD assemblies to move payloads from the Dragon trunk to the Enhanced Operational Transfer Platform (EOTP) to its final home on the Expedite the Processing of Experiments to Space Station (ExPRESS) Logistics Carrier (ELC)-4, incorporation of older models in varying unit sets, ability to change units easily (including hardcoded logic blocks), case-based logic to facilitate activating heaters and active elements for varying scenarios within a single model, incorporation of several coordinate frames to easily map to structural models with differing geometries and locations, and streamlined results processing using an Excel-based text file plotter developed in-house at LaRC. This document presents an overview of the SAGE III thermal model and describes the development and implementation of these efficiency-improving analysis methods.

Superficiary Right of Building: Origin and Development in Central Europe

Directory of Open Access Journals (Sweden)

Petr Pavel

2016-06-01

Full Text Available The Czech Republic has been dealing for the last four years with a legal revolution in the field of private law. A new Civil Code was adopted in 2012 and many new and forgotten legal figures were restored in the text of the code. An interesting example of forgotten legal figures is the superficiary right of building, which has again entered the legal order of the Czech Republic after a long one hundred years. Unlike the Act on the Superficiary Right of Building of 1912, the new Civil Code extends the scope of persons that may create the superficiary right of building to their land. This should eliminate the obstacle that has substantially limited its wider use. The superficiary right of building is not likely to become a legal concept very frequently seen in public registers. The aim of this paper is, therefore, a reflection on divided ownership and the purpose and genesis of the superficiary right of building in relation to its origins, as well as a prediction of future developments of this legal concept in the real estate market. To analyse the concept, the paper employs formal and legal methods (logical, grammatical and historical method. A comparative study is conducted in the spirit of the comparative method. The superficiary right of building is a suitable complement to the range of options of property rights offered by the new Civil Code. The author concludes that the use of the superficiary right of building, although not limited in comparison with the 1912 Act, will likely be less frequent and focused on longer-term projects.

A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting.

Science.gov (United States)

Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won; Ha, Ji-Hyoung

2017-01-01

The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times.

Original methods of quantitative analysis developed for diverse samples in various research fields. Quantitative analysis at NMCC

International Nuclear Information System (INIS)

Sera, Koichiro

2003-01-01

Nishina Memorial Cyclotron Center (NMCC) has been opened for nationwide-common utilization of positron nuclear medicine (PET) and PIXE since April 1993. At the present time, nearly 40 subjects of PIXE in various research fields are pursued here, and more than 50,000 samples have been analyzed up to the present. In order to perform quantitative analyses of diverse samples, technical developments in sample preparation, measurement and data analysis have been continuously carried out. Especially, a standard-free method for quantitative analysis'' made it possible to perform analysis of infinitesimal samples, powdered samples and untreated bio samples, which could not be well analyzed quantitatively in the past. The standard-free method'' and a ''powdered internal standard method'' made the process for target preparation quite easier. It has been confirmed that results obtained by these methods show satisfactory accuracy and reproducibility preventing any ambiguity coming from complicated target preparation processes. (author)

[Development and application of real-time PCR for identification and detection of horse meat in animal-origin products].

Science.gov (United States)

Li, Nan; Wang, Jiahui; Shen, Qing; Han, Chunhui; Zhang, Jing; Li, Fengqin; Xu, Jin; Jiang, Tao

2013-11-01

To develop a real-time PCR method for identification and detection of domestic horse meat (Equus caballus) in animal-origin products. The primer and TaqMan-probe was designed and synthesized according to the EU reference laboratory and 87 bp fragments was amplified for horse ingredients. The specificity and sensitivity was tested by artificially spiked horse meat into other domestic meat, such as cattle, sheep, pork, chicken, duck and rabbit. 122 samples of cattle and sheep products were random collected in Beijing market and the detection of horse meat was carried out. The real-time PCR in this study has high specificity and sensitivity for horse meat. No cross-reaction was observed between the horse and sheep, pork, chicken, duck and rabbit meat. There was little cross reaction between horse and cattle when the CT value reach 33. 81. The method can detect 0.1% of horse meat mixed with other domestic animal-origin products. No horse meat ingredients were detected in 122 samples in this survey. There was no horse meat mixed into cattle and sheep products in Beijing marked.

Thapsigargin, origin, chemistry, structure-activity relationships and prodrug development

DEFF Research Database (Denmark)

Doan, Thi Quynh Nhu; Christensen, Søren Brøgger

2015-01-01

Thapsigargin was originally isolated from the roots of the Mediterranean umbelliferous plant Thapsia garganica in order to characterize the skin irritant principle. The biological activity was related to the subnanomolar affinity for the sarco-endoplasmic reticulum calcium ATPase. Prolonged......) targeted against prostate cancer. Conjugation to a peptide, which only is a substrate for prostate specific membrane antigen enabled development of a prodrug (G202), which is targeted towards a number of cancer diseases including hepatocellular carcinoma. G202 has under the name of mipsagargin in clinical...

Development assessment of leisure agriculture in Henan province of China based on SWOT-AHP method

Directory of Open Access Journals (Sweden)

Yichuan Zhang

2013-06-01

Full Text Available Purpose: The development of leisure agriculture is an important means of agricultural industry structure adjustment of Henan province, China, to realize the transition from traditional agriculture to modern agriculture. Design/methodology/approach: The SWOT (Strength, Weakness, Opportunity, Threat analysis of Henan leisure agriculture will contribute to the sustainable development of Henan leisure agriculture. The strength, weakness, opportunity and threat of developing leisure agriculture in Henan province were systematically analyzed using SWOT method in our study. The aspects including location, resources, traffic, population, economy, urbanization, industrialization, market, policy, capital, product, technology, management, marketing and environment were involved. The strength, weakness, opportunity and threat were quantified in this study using AHP (Analytic Hierarchy Process method. Findings and Originality/value: The result showed that the total strength and total opportunity of Henan leisure agriculture are much greater than that of total weakness and total threat, which suggests that the opportunities outweigh threats, and advantage outweigh disadvantage. The growth-oriented strategy combining the external opportunities and its own advantages shall be employed in development of Henan leisure agriculture as indicated by the strategy strength coefficient in strategy quadrangle we have constructed. The barriers to the development need to be overcome while strengthening competitive advantages. Originality/value: New ideas for working out the developmental strategy for Henan leisure agriculture is provided by SWOT-AHP method.

De novo formation of nucleoli in developing mouse embryos originating from enucleolated zygotes.

Science.gov (United States)

Kyogoku, Hirohisa; Fulka, Josef; Wakayama, Teruhiko; Miyano, Takashi

2014-06-01

The large, compact oocyte nucleoli, sometimes referred to as nucleolus precursor bodies (NPBs), are essential for embryonic development in mammals; in their absence, the oocytes complete maturation and can be fertilized, but no nucleoli are formed in the zygote or embryo, leading to developmental failure. It has been convincingly documented that zygotes inherit the oocyte nucleolar material and form NPBs again in pronuclei. It is commonly accepted that during early embryonic development, the original compact zygote NPBs gradually transform into reticulated nucleoli of somatic cells. Here, we show that zygote NPBs are not required for embryonic and full-term development in the mouse. When NPBs were removed from late-stage zygotes by micromanipulation, the enucleolated zygotes developed to the blastocyst stage and, after transfer to recipients, live pups were obtained. We also describe de novo formation of nucleoli in developing embryos. After removal of NPBs from zygotes, they formed new nucleoli after several divisions. These results indicate that the zygote NPBs are not used in embryonic development and that the nucleoli in developing embryos originate from de novo synthesized materials. © 2014. Published by The Company of Biologists Ltd.

Discrimination of Medicine Radix Astragali from Different Geographic Origins Using Multiple Spectroscopies Combined with Data Fusion Methods

Science.gov (United States)

Wang, Hai-Yan; Song, Chao; Sha, Min; Liu, Jun; Li, Li-Ping; Zhang, Zheng-Yong

2018-05-01

Raman spectra and ultraviolet-visible absorption spectra of four different geographic origins of Radix Astragali were collected. These data were analyzed using kernel principal component analysis combined with sparse representation classification. The results showed that the recognition rate reached 70.44% using Raman spectra for data input and 90.34% using ultraviolet-visible absorption spectra for data input. A new fusion method based on Raman combined with ultraviolet-visible data was investigated and the recognition rate was increased to 96.43%. The experimental results suggested that the proposed data fusion method effectively improved the utilization rate of the original data.

Contextualising primate origins--an ecomorphological framework.

Science.gov (United States)

Soligo, Christophe; Smaers, Jeroen B

2016-04-01

Ecomorphology - the characterisation of the adaptive relationship between an organism's morphology and its ecological role - has long been central to theories of the origin and early evolution of the primate order. This is exemplified by two of the most influential theories of primate origins: Matt Cartmill's Visual Predation Hypothesis, and Bob Sussman's Angiosperm Co-Evolution Hypothesis. However, the study of primate origins is constrained by the absence of data directly documenting the events under investigation, and has to rely instead on a fragmentary fossil record and the methodological assumptions inherent in phylogenetic comparative analyses of extant species. These constraints introduce particular challenges for inferring the ecomorphology of primate origins, as morphology and environmental context must first be inferred before the relationship between the two can be considered. Fossils can be integrated in comparative analyses and observations of extant model species and laboratory experiments of form-function relationships are critical for the functional interpretation of the morphology of extinct species. Recent developments have led to important advancements, including phylogenetic comparative methods based on more realistic models of evolution, and improved methods for the inference of clade divergence times, as well as an improved fossil record. This contribution will review current perspectives on the origin and early evolution of primates, paying particular attention to their phylogenetic (including cladistic relationships and character evolution) and environmental (including chronology, geography, and physical environments) contextualisation, before attempting an up-to-date ecomorphological synthesis of primate origins. © 2016 Anatomical Society.

Method of local pointed function reduction of original shape in Fourier transformation

International Nuclear Information System (INIS)

Dosch, H.; Slavyanov, S.Yu.

2002-01-01

The method for analytical reduction of the original shape in the one-dimensional Fourier transformation by the fourier image modulus is proposed. The basic concept of the method consists in the presentation of the model shape in the form of the local peak functions sum. The eigenfunctions, generated by the linear differential equations with the polynomial coefficients, are selected as the latter ones. This provides for the possibility of managing the Fourier transformation without numerical integration. This reduces the reverse task to the nonlinear regression with a small number of the evaluated parameters and to the numerical or asymptotic study on the model peak functions - the eigenfunctions of the differential tasks and their fourier images [ru

A review of Green's function methods in computational fluid mechanics: Background, recent developments and future directions

International Nuclear Information System (INIS)

Dorning, J.

1981-01-01

The research and development over the past eight years on local Green's function methods for the high-accuracy, high-efficiency numerical solution of nuclear engineering problems is reviewed. The basic concepts and key ideas are presented by starting with an expository review of the original fully two-dimensional local Green's function methods developed for neutron diffusion and heat conduction, and continuing through the progressively more complicated and more efficient nodal Green's function methods for neutron diffusion, heat conduction and neutron transport to establish the background for the recent development of Green's function methods in computational fluid mechanics. Some of the impressive numerical results obtained via these classes of methods for nuclear engineering problems are briefly summarized. Finally, speculations are proffered on future directions in which the development of these types of methods in fluid mechanics and other areas might lead. (orig.) [de

Original Research Original Research

African Journals Online (AJOL)

RAGHAVENDRA

language in social interaction( Anto et al., 2012; Tessema et al., 2012). While such ..... 10 items on a five-point Likert scale originally developed by Benard et al. (2007). ..... self-confidence, and hold down their anxiety levels. In this study ...

Analysis and development of adjoint-based h-adaptive direct discontinuous Galerkin method for the compressible Navier-Stokes equations

Science.gov (United States)

Cheng, Jian; Yue, Huiqiang; Yu, Shengjiao; Liu, Tiegang

2018-06-01

In this paper, an adjoint-based high-order h-adaptive direct discontinuous Galerkin method is developed and analyzed for the two dimensional steady state compressible Navier-Stokes equations. Particular emphasis is devoted to the analysis of the adjoint consistency for three different direct discontinuous Galerkin discretizations: including the original direct discontinuous Galerkin method (DDG), the direct discontinuous Galerkin method with interface correction (DDG(IC)) and the symmetric direct discontinuous Galerkin method (SDDG). Theoretical analysis shows the extra interface correction term adopted in the DDG(IC) method and the SDDG method plays a key role in preserving the adjoint consistency. To be specific, for the model problem considered in this work, we prove that the original DDG method is not adjoint consistent, while the DDG(IC) method and the SDDG method can be adjoint consistent with appropriate treatment of boundary conditions and correct modifications towards the underlying output functionals. The performance of those three DDG methods is carefully investigated and evaluated through typical test cases. Based on the theoretical analysis, an adjoint-based h-adaptive DDG(IC) method is further developed and evaluated, numerical experiment shows its potential in the applications of adjoint-based adaptation for simulating compressible flows.

Analysis of fuel using the Direct LSC method determination of bio-originated fuel in the presence of quenching

International Nuclear Information System (INIS)

Doll, Charles G.; Wright, Cherylyn W.; Morley, Shannon M.; Wright, Bob W.

2017-01-01

In this paper, a modified version of the Direct LSC method to correct for quenching effect was investigated for the determination of bio-originated fuel content in fuel samples produced from multiple biological starting materials. The modified method was found to be accurate in determining the percent bio-originated fuel to within 5% of the actual value for samples with quenching effects ≤43%. Finally, analysis of highly quenched samples was possible when diluted with the exception of one sample with a 100% quenching effect.

Traditional products: Base for the sustainable development of Serbian animal origin products

Directory of Open Access Journals (Sweden)

Stevanović Jasna Lj.

2016-01-01

Full Text Available Research results on the diversity of traditional products of animal origin from certain areas of the Republic of Serbia, provides an opportunity to become part of the sustainable quality development, which would be based on their promotion and protection of local resources. Traditional products of animal origin are different and inseparable from the local identity, typical for nation and its food culture. Through confidence-building, and protection from oblivion, the value of domestic products, had preserved trough centuries-old tradition. Nowadays, each domestic product has its own recognisable taste, representing climate of the Republic of Serbia, from which it comes. Universally accepted model of rural institutional structure does not exist. Instead it accommodates and develops in accordance to needs, possibilities and area specific characteristics. By the efficient protection rural models becomes an investment incentives and contribute to general economic and industrial prosperity of the society.

Development and validation of an SPE HG-AAS method for determination of inorganic arsenic in samples of marine origin

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, Rie R.; Larsen, Erik H.; Sloth, Jens J. [Technical University of Denmark, National Food Institute, Division of Food Chemistry, Soeborg (Denmark); Hedegaard, Rikke V. [Technical University of Denmark, National Food Institute, Division of Food Chemistry, Soeborg (Denmark); University of Copenhagen, Faculty of Life Sciences, Department of Food Science, Frederiksberg (Denmark)

2012-07-15

The present paper describes a novel method for the quantitative determination of inorganic arsenic (iAs) in food and feed of marine origin. The samples were subjected to microwave-assisted extraction using diluted hydrochloric acid and hydrogen peroxide, which solubilised the analytes and oxidised arsenite (As{sup III}) to arsenate (As{sup V}). Subsequently, a pH buffering of the sample extract at pH 6 enabled selective elution of As{sup V} from a strong anion exchange solid-phase extraction (SPE) cartridge. Hydride generation atomic absorption spectrometry (HG-AAS) was applied to quantify the concentration of iAs (sum of As{sup III} and As{sup V}) as the total arsenic (As) in the SPE eluate. The results of the in-house validation showed that mean recoveries of 101-104% were achieved for samples spiked with iAs at 0.5, 1.0 and 1.5 mg.kg{sup -1}, respectively. The limit of detection was 0.08 mg kg{sup -1}, and the repeatability (RSD{sub r}) and intra-laboratory reproducibility (RSD{sub IR}) were less than 8% and 13%, respectively, for samples containing 0.2 to 1.5 mg kg{sup -1} iAs. The trueness of the SPE HG-AAS method was verified by confirming results obtained by parallel analysis using high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry. It was demonstrated that the two sets of results were not significantly different (P < 0.05). The SPE HG-AAS method was applied to 20 marine food and feed samples, and concentrations of up to 0.14 mg kg{sup -1} of iAs were detected. (orig.)

The origin and historical development of branding and advertising in the old civilizations of Africa, Asia and Europe

Directory of Open Access Journals (Sweden)

Starčević Slađana

2015-01-01

Full Text Available The development of branding and advertising has always been mutually conditioned. The goal of this research is to determine the origin and show historic development of branding and advertising in the ancient civilizations of Africa, Asia and Europe. The historical method of research was used. New evidence on various means of branding, advertising and other promotional activities application in the ancient history is presented. What was found is that social development imposed a need for marking of goods and promotional activities. It was done in a similar manner in all ancient civilizations, regardless of different time span. There were two types of branding and advertising: commercial and personal. The roles of branding and advertising were versatile and similar to their contemporary roles.

Age of Saurashtra miliolites by U-Th decay series methods: possible implications to their origin

International Nuclear Information System (INIS)

Hussain, N.; Bhandari, N.; Ramanathan, K.R.; Somayajulu, B.L.K.

1980-01-01

The miliolite deposits of Saurashtra have been dated by 234 U, 230 Th, 231 Pa and 14 C methods. Concordant ages of approximately 10 5 years using the U decay series isotopes are obtained which agree with the ages of the coral reefs of Okha-Dwaraka coast suggesting a contemporaneous origin for both. The lower 14 C ages (<= 40,000 years) may be due to a recent influx of seawater or ground water. Quartz and clay minerals together constitute only <= 10% by weight, as such the aeolin characteristics of quartz grains may not be relevant to the origin of the miliolites. (auth.)

Determining origin in a migratory marine vertebrate: a novel method to integrate stable isotopes and satellite tracking

Science.gov (United States)

Vander Zanden, Hannah B.; Tucker, Anton D.; Hart, Kristen M.; Lamont, Margaret M.; Fujisaki, Ikuko; Addison, David S.; Mansfield, Katherine L.; Phillips, Katrina F.; Wunder, Michael B.; Bowen, Gabriel J.; Pajuelo, Mariela; Bolten, Alan B.; Bjorndal, Karen A.

2015-01-01

Stable isotope analysis is a useful tool to track animal movements in both terrestrial and marine environments. These intrinsic markers are assimilated through the diet and may exhibit spatial gradients as a result of biogeochemical processes at the base of the food web. In the marine environment, maps to predict the spatial distribution of stable isotopes are limited, and thus determining geographic origin has been reliant upon integrating satellite telemetry and stable isotope data. Migratory sea turtles regularly move between foraging and reproductive areas. Whereas most nesting populations can be easily accessed and regularly monitored, little is known about the demographic trends in foraging populations. The purpose of the present study was to examine migration patterns of loggerhead nesting aggregations in the Gulf of Mexico (GoM), where sea turtles have been historically understudied. Two methods of geographic assignment using stable isotope values in known-origin samples from satellite telemetry were compared: 1) a nominal approach through discriminant analysis and 2) a novel continuous-surface approach using bivariate carbon and nitrogen isoscapes (isotopic landscapes) developed for this study. Tissue samples for stable isotope analysis were obtained from 60 satellite-tracked individuals at five nesting beaches within the GoM. Both methodological approaches for assignment resulted in high accuracy of foraging area determination, though each has advantages and disadvantages. The nominal approach is more appropriate when defined boundaries are necessary, but up to 42% of the individuals could not be considered in this approach. All individuals can be included in the continuous-surface approach, and individual results can be aggregated to identify geographic hotspots of foraging area use, though the accuracy rate was lower than nominal assignment. The methodological validation provides a foundation for future sea turtle studies in the region to inexpensively

Original Research Challenges facing young African scientists in ...

African Journals Online (AJOL)

This study aimed at identifying the challenges that young African scientists face in their career development. Methods ... The research profile of Africans is relatively new, and the .... outside the country because it will support my original ideas.”.

The origins of originality: the neural bases of creative thinking and originality.

Science.gov (United States)

Shamay-Tsoory, S G; Adler, N; Aharon-Peretz, J; Perry, D; Mayseless, N

2011-01-01

Although creativity has been related to prefrontal activity, recent neurological case studies postulate that patients who have left frontal and temporal degeneration involving deterioration of language abilities may actually develop de novo artistic abilities. In this study, we propose a neural and cognitive model according to which a balance between the two hemispheres affects a major aspect of creative cognition, namely, originality. In order to examine the neural basis of originality, that is, the ability to produce statistically infrequent ideas, patients with localized lesions in the medial prefrontal cortex (mPFC), inferior frontal gyrus (IFG), and posterior parietal and temporal cortex (PC), were assessed by two tasks involving divergent thinking and originality. Results indicate that lesions in the mPFC involved the most profound impairment in originality. Furthermore, precise anatomical mapping of lesions indicated that while the extent of lesion in the right mPFC was associated with impaired originality, lesions in the left PC were associated with somewhat elevated levels of originality. A positive correlation between creativity scores and left PC lesions indicated that the larger the lesion is in this area the greater the originality. On the other hand, a negative correlation was observed between originality scores and lesions in the right mPFC. It is concluded that the right mPFC is part of a right fronto-parietal network which is responsible for producing original ideas. It is possible that more linear cognitive processing such as language, mediated by left hemisphere structures interferes with creative cognition. Therefore, lesions in the left hemisphere may be associated with elevated levels of originality. Copyright © 2010 Elsevier Ltd. All rights reserved.

FY 1998 results of the intellectual basement project using functions of private companies (venture promotion type basement creation R and D project). Development of endocrine disrupter testing method and development of environmental assessment method; 1998 nendo naibunpi kakuran busshitsu ni taisuru shiken hoho kaihatsu oyobi eikyo hyoka shuho kaihatsu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of assessing the risk in relation to endocrine disrupting chemicals, the following were conducted: development of testing/assessment method for endocrine disrupting chemicals, survey of the actual exposure assessment, development of measuring method for the concentration in the environment. In the development of the testing method, the following were carried out: development of a high-throughput screening method for evaluating endocrine disrupting chemicals; as screening testing method using mammals, uterotrophic assay, Hershberger assay using castrated male rats, thyroid hormone assay in pubertal rats, enhanced OECD 407 test guideline for 28-day toxicity test; study on yeast two-hybrid assay for endocrine disrupter; sex-reversal assay for suspected endocrine disrupting chemicals using S-rR strain medaka. In the development of exposure assessment method, estrogenic potency of individual nonylphenol congeners isolated from technical mixtures; determination of endocrine disrupters and related chemicals from industry and nature origin in river water and sediment; research for the flow of industrial origin chemicals; reconstruction of pollution history of chemicals using sediment cores. (NEDO)

Father involvement in Mexican-origin families: Preliminary development of a culturally informed measure.

Science.gov (United States)

Roubinov, Danielle S; Luecken, Linda J; Gonzales, Nancy A; Crnic, Keith A

2016-04-01

An increasing body of research has documented the significant influence of father involvement on children's development and overall well-being. However, extant research has predominately focused on middle-class Caucasian samples with little examination of fathering in ethnic minority and low-income families, particularly during the infancy period. The present study evaluated measures of early father involvement (paternal engagement, accessibility, and responsibility) that were adapted to capture important cultural values relevant to the paternal role in Mexican-origin families. A sample of 180 Mexican-origin mothers (M age = 28.3) and 83 Mexican-origin fathers (M age = 31.5) were interviewed during the perinatal period. Descriptive analyses indicated that Mexican-origin fathers are involved in meaningful levels of direct interaction with their infant. A 2-factor model of paternal responsibility was supported by factor analyses, consisting of a behavioral responsibility factor aligned with previous literature and culturally derived positive machismo factor. Qualities of the romantic relationship, cultural orientation, and maternal employment status were related to indices of father involvement. These preliminary results contribute to understanding of the transition to fatherhood among low-income Mexican-origin men and bring attention to the demographic, social, and cultural contexts in which varying levels of father involvement may emerge. (c) 2016 APA, all rights reserved).

Age of Saurashtra miliolites by U-Th decay series methods: possible implications to their origin

Energy Technology Data Exchange (ETDEWEB)

Hussain, N; Bhandari, N; Ramanathan, K R; Somayajulu, B L.K. [Physical Research Lab., Ahmedabad (India)

1980-03-01

The miliolite deposits of Saurashtra have been dated by /sup 234/U, /sup 230/Th, /sup 231/Pa and /sup 14/C methods. Concordant ages of approximately 10/sup 5/ years using the U decay series isotopes are obtained which agree with the ages of the coral reefs of Okha-Dwaraka coast suggesting a contemporaneous origin for both. The lower /sup 14/C ages (<= 40,000 years) may be due to a recent influx of seawater or ground water. Quartz and clay minerals together constitute only <= 10% by weight, as such the aeolin characteristics of quartz grains may not be relevant to the origin of the miliolites.

Development of a high performance liquid chromatography method and a liquid chromatography-tandem mass spectrometry method with pressurized liquid extraction for simultaneous quantification and confirmation of cyromazine, melamine and its metabolites in foods of animal origin

International Nuclear Information System (INIS)

Yu Huan; Tao Yanfei; Chen Dongmei; Wang Yulian; Liu Zhaoying; Pan Yuanhu; Huang Lingli; Peng Dapeng; Dai Menghong; Liu Zhenli; Yuan Zonghui

2010-01-01

Simple and sensitive methods have been developed for simultaneous detection of cyromazine, melamine and their metabolites (ammeline, ammelide and cyanuric acid) in samples of animal origins. These include a high performance liquid chromatography (HPLC) method and a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method and are useful in regular monitoring and in toxicity studies of these molecules. Representative samples used in this study include muscles and livers of swine, bovine, sheep and chicken, kidneys of swine, bovine and sheep, and milk powder. A new sample preparation procedure with pressurized liquid extraction (PLE) at 1400 psi and 70 deg. C was investigated. Quantification of these five compounds by HPLC was achieved using an APS-2 column with UV detection at 230 nm. Limit of detection (LOD) was at 10 μg kg -1 , and limit of quantification (LOQ) was at 40 μg kg -1 . Recoveries of the five analytes in spiked samples ranged from 72.2% to 115.4% with RSD less than 12%. Confirmatory analysis of the analytes was performed using LC-MS/MS in selected reaction monitoring (SRM) mode. The LOD and LOQ were 5 μg kg -1 and 15 μg kg -1 , respectively. This is the first simultaneous analysis of cyromazine, melamine, ammeline, ammelide and cyanuric acid residues in complex tissue samples using PLE and HPLC. It is expected that these methods will find many practical applications in evaluating the safety of cyromazine, melamine and their metabolites.

Development and validation of a multiresidue method for pesticide analysis in honey by UFLC-MS

Directory of Open Access Journals (Sweden)

Adriana M. Zamudio S.

2017-05-01

Full Text Available A method for the determination of pesticide residues in honey by ultra fast liquid chromatography coupled with mass spectrometry was developed. For this purpose, different variations of the QuECHERS method were performed: (i amount of sample, (ii type of salt to control pH, (iii buffer pH, and (iv different mixtures for cleaning-up. In addition, to demonstrate that the method is reliable, different validation parameters were studied: accuracy, limits of detection and quantification, linearity and selectivity. The results showed that by means of the changes introduced it was possible to get a more selective method that improves the accuracy of about 19 pesticides selected from the original method. It was found that the method is suitable for the analysis of 50 pesticides, out of 56. Furthermore, with the developed method recoveries between 70 and 120% and relative standard deviation below 15% were found.

Methods for the determination of skeletal muscle blood flow: development, strengths and limitations

DEFF Research Database (Denmark)

Gliemann, Lasse; Mortensen, Stefan P.; Hellsten, Ylva

2018-01-01

Since the first measurements of limb blood flow at rest and during nerve stimulation were conducted in the late 1800s, a number of methods have been developed for the determination of limb and skeletal muscle blood flow in humans. The methods, which have been applied in the study of aspects...... such as blood flow regulation, oxygen uptake and metabolism, differ in terms of strengths and degree of limitations but most have advantages for specific settings. The purpose of this review is to describe the origin and the basic principles of the methods, important aspects and requirements of the procedures....... One of the earliest methods, venous occlusion plethysmography, is a noninvasive method which still is extensively used and which provides similar values as other more direct blood flow methods such as ultrasound Doppler. The constant infusion thermodilution method remains the most appropriate...

The early life origin theory in the development of cardiovascular disease and type 2 diabetes.

Science.gov (United States)

Lindblom, Runa; Ververis, Katherine; Tortorella, Stephanie M; Karagiannis, Tom C

2015-04-01

Life expectancy has been examined from a variety of perspectives in recent history. Epidemiology is one perspective which examines causes of morbidity and mortality at the population level. Over the past few 100 years there have been dramatic shifts in the major causes of death and expected life length. This change has suffered from inconsistency across time and space with vast inequalities observed between population groups. In current focus is the challenge of rising non-communicable diseases (NCD), such as cardiovascular disease and type 2 diabetes mellitus. In the search to discover methods to combat the rising incidence of these diseases, a number of new theories on the development of morbidity have arisen. A pertinent example is the hypothesis published by David Barker in 1995 which postulates the prenatal and early developmental origin of adult onset disease, and highlights the importance of the maternal environment. This theory has been subject to criticism however it has gradually gained acceptance. In addition, the relatively new field of epigenetics is contributing evidence in support of the theory. This review aims to explore the implication and limitations of the developmental origin hypothesis, via an historical perspective, in order to enhance understanding of the increasing incidence of NCDs, and facilitate an improvement in planning public health policy.

Developing methods for detecting radioactive scrap

International Nuclear Information System (INIS)

Bellian, J.G.; Johnston, J.G.

1995-01-01

During the last 10 years, there have been major developments in radiation detection systems used for catching shielded radioactive sources in scrap metal. The original testing required to determine the extent of the problem and the preliminary designs of the first instruments will be discussed. Present systems available today will be described listing their advantages and disadvantages. In conclusion, the newest developments and state of the art equipment will also be included describing the limits and most appropriate locations for the systems

An Evolutionary Framework for Understanding the Origin of Eukaryotes

Directory of Open Access Journals (Sweden)

Neil W. Blackstone

2016-04-01

Full Text Available Two major obstacles hinder the application of evolutionary theory to the origin of eukaryotes. The first is more apparent than real—the endosymbiosis that led to the mitochondrion is often described as “non-Darwinian” because it deviates from the incremental evolution championed by the modern synthesis. Nevertheless, endosymbiosis can be accommodated by a multi-level generalization of evolutionary theory, which Darwin himself pioneered. The second obstacle is more serious—all of the major features of eukaryotes were likely present in the last eukaryotic common ancestor thus rendering comparative methods ineffective. In addition to a multi-level theory, the development of rigorous, sequence-based phylogenetic and comparative methods represents the greatest achievement of modern evolutionary theory. Nevertheless, the rapid evolution of major features in the eukaryotic stem group requires the consideration of an alternative framework. Such a framework, based on the contingent nature of these evolutionary events, is developed and illustrated with three examples: the putative intron proliferation leading to the nucleus and the cell cycle; conflict and cooperation in the origin of eukaryotic bioenergetics; and the inter-relationship between aerobic metabolism, sterol synthesis, membranes, and sex. The modern synthesis thus provides sufficient scope to develop an evolutionary framework to understand the origin of eukaryotes.

Origin of galaxies: a review of recent theoretical developments and their confrontation with observation

International Nuclear Information System (INIS)

Jones, B.J.T.

1976-01-01

The subject of galaxy formation has advanced considerably during the past decade. On the theoretical side two theories in particular were developed to the point where confrontation with observation will be possible; these are the ''gravitational instability picture'' and the ''cosmic turbulence theory.'' These theories are discussed at some length, with particular attention to the question of the origin of cosmic angular momentum and the nature of the initial conditions. There is now a considerable body of data on galaxies; the problem is in deciding which kind of observation is most relevant to understanding the origin of galaxies. Throughout the review an attempt is made both to put the present research in its historical perspective and to stress the possibilities for future advances towards the goal of understanding the origin of cosmic structure

[Influence of different original processing methods on quality of Salvia Miltiorrhizae Radix et Rhizoma from Shandong].

Science.gov (United States)

Zhao, Zhi-Gang; Gao, Shu-Rui; Hou, Jun-Ling; Wang, Wen-Quan; Xu, Zhen-Guang; Song, Yan; Zhang, Xian-Ming; Li, Jun

2014-04-01

In this paper the contents of rosmarinic acid, salvianolic acid B, crytotanshinone, tanshinone II(A) in samples of different original processed Salvia Miltiorrhizae Radix et Rhizoma were determined by HPLC. Different processing methods have varied influences on four active ingredients in Salvia Miltiorrhizae Radix et Rhizoma. Sun-drying reduced the content of crytotanshinone, tanshi-none II(A) and rosmarinic acid, integralsamples were better than those cut into segments. Oven dry method had great influence on water--soluble ingredients, high temperature (80-100 degrees C) could easily cause big loss of rosmarinic acid and salvianolic acid B. The role of traditional processing method "fahan: was complicated, the content of rosmarinic acid decreased, crytotanshinone and tanshinone II(A) increased, and salvianolic acid B showed no difference after "fahan". Drying in the shade and oven dry under low temperatrure (40-60 degrees C) were all effective to keep active ingredients of Salvia Miltiorrhizae Radix et Rhizoma, and, there was no difference between integral samples and samples cut into segments. Therefore, considering comprehensively the content of active ingredients in Salvia Miltiorrhizae Radix et Rhizoma, and processing costing etc., shade-drying or oven dry underlow temperature (40-60 degrees C) should be the most suitable original processing method.

Biodistance analysis of the Moche sacrificial victims from Huaca de la Luna plaza 3C: Matrix method test of their origins.

Science.gov (United States)

Sutter, Richard C; Verano, John W

2007-02-01

The purpose of this study is to test two competing models regarding the origins of Early Intermediate Period (AD 200-750) sacrificial victims from the Huacas de Moche site using the matrix correlation method. The first model posits the sacrificial victims represent local elites who lost competitions in ritual battles with one another, while the other model suggests the victims were nonlocal warriors captured during warfare with nearby polities. We estimate biodistances for sacrificial victims from Huaca de la Luna Plaza 3C (AD 300-550) with eight previously reported samples from the north coast of Peru using both the mean measure of divergence (MMD) and Mahalanobis' distance (d2). Hypothetical matrices are developed based upon the assumptions of each of the two competing models regarding the origins of Moche sacrificial victims. When the MMD matrix is compared to the two hypothetical matrices using a partial-Mantel test (Smouse et al.: Syst Zool 35 (1986) 627-632), the ritual combat model (i.e. local origins) has a low and nonsignificant correlation (r = 0.134, P = 0.163), while the nonlocal origins model is highly correlated and significant (r = 0.688, P = 0.001). Comparisons of the d2 results and the two hypothetical matrices also produced low and nonsignificant correlation for the ritual combat model (r = 0.210, P = 0.212), while producing a higher and statistically significant result with the nonlocal origins model (r = 0.676, P = 0.002). We suggest that the Moche sacrificial victims represent nonlocal warriors captured in territorial combat with nearby competing polities. Copyright 2006 Wiley-Liss, Inc.

Development of molecular markers for determining continental origin of wood from White Oaks (Quercus L. sect. Quercus)

Science.gov (United States)

Hilke Schroeder; Richard Cronn; Yulai Yanbaev; Tara Jennings; Malte Mader; Bernd Degen; Birgit Kersten; Dusan Gomory

2016-01-01

To detect and avoid illegal logging of valuable tree species, identification methods for the origin of timber are necessary. We used next-generation sequencing to identify chloroplast genome regions that differentiate the origin of white oaks from the three continents; Asia, Europe, and North America. By using the chloroplast genome of Asian Q. mongolica...

Method Development in Forensic Toxicology.

Science.gov (United States)

Peters, Frank T; Wissenbach, Dirk K; Busardo, Francesco Paolo; Marchei, Emilia; Pichini, Simona

2017-01-01

In the field of forensic toxicology, the quality of analytical methods is of great importance to ensure the reliability of results and to avoid unjustified legal consequences. A key to high quality analytical methods is a thorough method development. The presented article will provide an overview on the process of developing methods for forensic applications. This includes the definition of the method's purpose (e.g. qualitative vs quantitative) and the analytes to be included, choosing an appropriate sample matrix, setting up separation and detection systems as well as establishing a versatile sample preparation. Method development is concluded by an optimization process after which the new method is subject to method validation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Extended safe preservation period of foods of plant origin through combined technological methods

International Nuclear Information System (INIS)

Miteva, D.; Nacheva, I.; Dzhakova, A.; Tsvetkov, Tsv.

2008-01-01

The sublimation drying of fruits as an innovative technology for preservation their composition and enzyme activity is applied to various fruits: apricots, strawberries, plumbs, peaches and apples. The authors present the main methods of lyophilization as an original biotechnology for cryopreservation of fruits and afterwards are subjected to cold sterilization with 1.5 and 3 kGy doses of gamma irradiation. The combined application of both technologies provides safe and extended preservation of fresh fruits with high content of vitamins, mineral salts, maximum preserved enzyme system, aroma-tasty complex and microbiological purity

Carotenoids from Foods of Plant, Animal and Marine Origin: An Efficient HPLC-DAD Separation Method

Directory of Open Access Journals (Sweden)

Irini F. Strati

2012-12-01

Full Text Available Carotenoids are important antioxidant compounds, present in many foods of plant, animal and marine origin. The aim of the present study was to describe the carotenoid composition of tomato waste, prawn muscle and cephalothorax and avian (duck and goose egg yolks through the use of a modified gradient elution HPLC method with a C30 reversed-phase column for the efficient separation and analysis of carotenoids and their cis-isomers. Elution time was reduced from 60 to 45 min without affecting the separation efficiency. All-trans lycopene predominated in tomato waste, followed by all-trans-β-carotene, 13-cis-lutein and all-trans lutein, while minor amounts of 9-cis-lutein, 13-cis-β-carotene and 9-cis-β-carotene were also detected. Considering the above findings, tomato waste is confirmed to be an excellent source of recovering carotenoids, especially all-trans lycopene, for commercial use. Xanthophylls were the major carotenoids of avian egg yolks, all-trans lutein and all-trans zeaxanthin in duck and goose egg yolk, respectively. In the Penaeus kerathurus prawn, several carotenoids (zeaxanthin, all-trans-lutein, canthaxanthin, cryptoxanthin, optical and geometrical astaxanthin isomers were identified in considerable amounts by the same method. A major advantage of this HPLC method was the efficient separation of carotenoids and their cis-isomers, originating from a wide range of matrices.

A Normative Definition Method for Origin Food Products

NARCIS (Netherlands)

Meulen, van der H.S.

2007-01-01

The aim of this article is to define a methodological tool to evaluate the contribution of various factors to the connectedness of food products to their places of origin, i.e. to the specific market potential that arises from that link. Most of the examples given here are drawn from the Dutch

Extended precision data types for the development of the original computer aided engineering applications

Science.gov (United States)

Pescaru, A.; Oanta, E.; Axinte, T.; Dascalescu, A.-D.

2015-11-01

Computer aided engineering is based on models of the phenomena which are expressed as algorithms. The implementations of the algorithms are usually software applications which are processing a large volume of numerical data, regardless the size of the input data. In this way, the finite element method applications used to have an input data generator which was creating the entire volume of geometrical data, starting from the initial geometrical information and the parameters stored in the input data file. Moreover, there were several data processing stages, such as: renumbering of the nodes meant to minimize the size of the band length of the system of equations to be solved, computation of the equivalent nodal forces, computation of the element stiffness matrix, assemblation of system of equations, solving the system of equations, computation of the secondary variables. The modern software application use pre-processing and post-processing programs to easily handle the information. Beside this example, CAE applications use various stages of complex computation, being very interesting the accuracy of the final results. Along time, the development of CAE applications was a constant concern of the authors and the accuracy of the results was a very important target. The paper presents the various computing techniques which were imagined and implemented in the resulting applications: finite element method programs, finite difference element method programs, applied general numerical methods applications, data generators, graphical applications, experimental data reduction programs. In this context, the use of the extended precision data types was one of the solutions, the limitations being imposed by the size of the memory which may be allocated. To avoid the memory-related problems the data was stored in files. To minimize the execution time, part of the file was accessed using the dynamic memory allocation facilities. One of the most important consequences of the

Methods for estimating the site of origin of locoregional recurrence in head and neck squamous cell carcinoma

Energy Technology Data Exchange (ETDEWEB)

Due, A.K.; Vogelius, I.R.; Berthelsen, A.K.; Kristensen, C.A.; Specht, L. [Copenhagen Univ. (Denmark). Dept. of Radiation Oncology Section 3994; Aznar, M.C. [Copenhagen Univ. (Denmark). Dept. of Radiation Oncology Section 3994; Copenhagen Univ. (Denmark). Niels Bohr Institute; Bentzen, S.M. [Copenhagen Univ. (Denmark). Dept. of Radiation Oncology Section 3994; Wisconsin Univ., MD (United States). Depts. of Human Oncology and Medical Physics; Korreman, S.S. [Copenhagen Univ. (Denmark). Niels Bohr Institute; Roskilde Univ. (Denmark). Dept. of Science, Systems, and Models

2012-08-15

Purpose: Methods to estimate the likely origin of recurrences after radiation therapy for head and neck squamous cell carcinoma are compared. Methods and materials: A total of 25 patients meeting the following inclusion criteria were randomly selected: curatively intended intensity-modulated radiotherapy planned on a positron emission tomography-computed tomography (PET/CT) scan during the period 2005-2009; squamous cell carcinoma in the oral cavity, pharynx or larynx; complete clinical response followed by locoregional recurrence; and a CT scan at recurrence before any salvage therapy. Exclusion criteria were previous cancer in the area, surgery prior to radiotherapy, or a synchronous cancer. Three methods of estimating focal points of recurrence origin and two volume overlap methods assigning the recurrences to the most central target volumes encompassing at least 50% or 95% of the recurrence volumes were tested. Treatment planning and recurrence scans were rigid and deformable co-registered in order to transfer focal points to the treatment planning scan. Double determinations of all volumes, points, and co-registrations were made. Results: The volume overlap methods assigned the recurrences to significantly more peripheral target volumes than focal methods (p < 0.0001 for all comparisons of 95% overlap vs. focal methods, p < 0.028 for all comparisons of 50% overlap vs. focal methods). Repeated registrations of the same point had higher reproducibility with deformable registration than with rigid registration (median distance 0.31 vs. 0.35 cm, p = 0.015). No significant differences were observed among the focal methods. Conclusion: Significant differences between methods were found which may affect strategies to improve radiotherapy based on pattern of failure analyses. (orig.)

Evaluating a physician leadership development program - a mixed methods approach.

Science.gov (United States)

Throgmorton, Cheryl; Mitchell, Trey; Morley, Tom; Snyder, Marijo

2016-05-16

Purpose - With the extent of change in healthcare today, organizations need strong physician leaders. To compensate for the lack of physician leadership education, many organizations are sending physicians to external leadership programs or developing in-house leadership programs targeted specifically to physicians. The purpose of this paper is to outline the evaluation strategy and outcomes of the inaugural year of a Physician Leadership Academy (PLA) developed and implemented at a Michigan-based regional healthcare system. Design/methodology/approach - The authors applied the theoretical framework of Kirkpatrick's four levels of evaluation and used surveys, observations, activity tracking, and interviews to evaluate the program outcomes. The authors applied grounded theory techniques to the interview data. Findings - The program met targeted outcomes across all four levels of evaluation. Interview themes focused on the significance of increasing self-awareness, building relationships, applying new skills, and building confidence. Research limitations/implications - While only one example, this study illustrates the importance of developing the evaluation strategy as part of the program design. Qualitative research methods, often lacking from learning evaluation design, uncover rich themes of impact. The study supports how a PLA program can enhance physician learning, engagement, and relationship building throughout and after the program. Physician leaders' partnership with organization development and learning professionals yield results with impact to individuals, groups, and the organization. Originality/value - Few studies provide an in-depth review of evaluation methods and outcomes of physician leadership development programs. Healthcare organizations seeking to develop similar in-house programs may benefit applying the evaluation strategy outlined in this study.

Original pedagogues

DEFF Research Database (Denmark)

Schmidt, Christina Haandbæk

Original pedagogues Distention between competences and originality By Christina Haandbæk Schmidt, ph. d. student Aarhus University, Denmark This presentation concerns a Ph.D. project (Sept. 2012 –Sept. 2015) about pedagogues in day care facilities and their struggles to develop and retain...... shall argue that it is necessary for the pedagogues to know how they are constituted by the regimes of power on one side and on the other side are forced to create themselves. This knowledge could transform pedagogues into what I suggest calling ‘original pedagogues’, who have an authentic, ethic...... and professional autonomy in exercising judgment concerning pedagogical situations. To understand how pedagogues can struggle the distention between being competent and being original the project draws on both Michel Foucault and Charles Taylor as two incompatible theories on modern identity. The study...

A General Method for Assessing the Origin of Interstellar Small Bodies: The Case of 1I/2017 U1 (‘Oumuamua)

Science.gov (United States)

Zuluaga, Jorge I.; Sánchez-Hernández, Oscar; Sucerquia, Mario; Ferrín, Ignacio

2018-06-01

With the advent of more and deeper sky surveys, the discovery of interstellar small objects entering into the solar system has been finally possible. In 2017 October 19, using observations of the Pan-STARRS survey, a fast moving object, now officially named 1I/2017 U1 (‘Oumuamua), was discovered in a heliocentric unbound trajectory, suggesting an interstellar origin. Assessing the provenance of interstellar small objects is key for understanding their distribution, spatial density, and the processes responsible for their ejection from planetary systems. However, their peculiar trajectories place a limit on the number of observations available to determine a precise orbit. As a result, when its position is propagated ∼105–106 years backward in time, small errors in orbital elements become large uncertainties in position in the interstellar space. In this paper we present a general method for assigning probabilities to nearby stars of being the parent system of an observed interstellar object. We describe the method in detail and apply it for assessing the origin of ‘Oumuamua. A preliminary list of potential progenitors and their corresponding probabilities is provided. In the future, when further information about the object and/or the nearby stars be refined, the probabilities computed with our method can be updated. We provide all the data and codes we developed for this purpose in the form of an open source C/C++/Python package, iWander, which is publicly available at http://github.com/seap-udea/iWander.

Authentication of the botanical origin of Western herbal products using Cimicifuga and Vitex products as examples.

Science.gov (United States)

Masada, Sayaka

2016-07-01

Various herbal medicines have been developed and used in various parts of the world for thousands of years. Although locally grown indigenous plants were originally used for traditional herbal preparations, Western herbal products are now becoming popular in Japan with the increasing interest in health. At the same time, there are growing concerns about the substitution of ingredients and adulteration of herbal products, highlighting the need for the authentication of the origin of plants used in herbal products. This review describes studies on Cimicifuga and Vitex products developed in Europe and Japan, focusing on establishing analytical methods to evaluate the origins of material plants and finished products. These methods include a polymerase chain reaction-restriction fragment length polymorphism method and a multiplex amplification refractory mutation system method. A genome-based authentication method and liquid chromatography-mass spectrometry-based authentication for black cohosh products, and the identification of two characteristic diterpenes of agnus castus fruit and a shrub chaste tree fruit-specific triterpene derivative are also described.

Classification of objects on hyperspectral images — further method development

DEFF Research Database (Denmark)

Kucheryavskiy, Sergey V.; Williams, Paul James

principal component space. In the original method score histograms were used as the descriptors. The method modifications include both the way the principal component space is built as well as the use of new descriptors for the patterns. The comparison of the modified method with its previous version...

IoT System Development Methods

NARCIS (Netherlands)

Giray, G.; Tekinerdogan, B.; Tüzün, E.

2018-01-01

It is generally believed that the application of methods plays an important role in developing quality systems. A development method is mainly necessary for structuring the process in producing largescale and complex systems that involve high costs. Similar to the development of other systems, it is

Development of sample preparation method for honey analysis using PIXE

International Nuclear Information System (INIS)

Saitoh, Katsumi; Chiba, Keiko; Sera, Koichiro

2008-01-01

We developed an original preparation method for honey samples (samples in paste-like state) specifically designed for PIXE analysis. The results of PIXE analysis of thin targets prepared by adding a standard containing nine elements to honey samples demonstrated that the preparation method bestowed sufficient accuracy on quantitative values. PIXE analysis of 13 kinds of honey was performed, and eight mineral components (Si, P, S, K, Ca, Mn, Cu and Zn) were detected in all honey samples. The principal mineral components were K and Ca, and the quantitative value for K accounted for the majority of the total value for mineral components. K content in honey varies greatly depending on the plant source. Chestnuts had the highest K content. In fact, it was 2-3 times that of Manuka, which is known as a high quality honey. K content of false-acacia, which is produced in the greatest abundance, was 1/20 that of chestnuts. (author)

[Origin and development of pathological anatomy in Trieste: a paradigmatic history].

Science.gov (United States)

Melato, M

1997-10-01

The history of the Italian city of Trieste is somewhat unique. In 1382, being unable to compete with nearby Venice, it gave itself up to the Archduchy of Austria, which, while ensuring Trieste a certain degree of autonomy, did nothing to improve the town's economy. Things changed, however, after 1719, when Trieste was declared a Free Port. The city, at the time poor and lacking the human and economic resources that might have given life to the long-awaited trading activities, started to attract flocks of immigrant labourers and professionals, including many physicians. Thus, from mid-18th C onwards, Trieste witnessed the rise of a local class of physicians. Graduates from the major European universities of the times, these physicians were highly active in the rapid professional and cultural growth of the city. Being free from traditions or affiliations to specific medical schools, this unusually multicultural class of professionals provides a sample of the times' medical class which is particularly suitable for understanding what schools of thought dominated during that period. A number of publications, largely dealing with pathology, and many historical circumstances show that this newly formed class of physicians was influenced by the scientific method advanced by Morgagni in his De Sedibus. It is also clear that Morgagni's influence greatly benefited the city's doctors and soon turned them into fertile and original promoters of ideas, as well as highly skilled professionals. When the times became ripe to take on a specialist in pathology, both medical class and local authorities showed great interest in the field by making sure that the successful candidate, Dr. Simon Pertot, had all the resources and equipment necessary for the specialist to become a central figure in professional training and medical research in Trieste. Thus, the kind of clinical pathology where a single physician performed macroscopic examinations to identify his patient's cause of death

Development of ICP-AES based method for the characterization of high level waste

International Nuclear Information System (INIS)

Seshagiri, T.K.; Thulsidas, S.K.; Adya, V.C.; Kumar, Mithlesh; Radhakrishnan, K.; Mary, G.; Kulkarni, P.G.; Bhalerao, Bharti; Pant, D.K.

2011-01-01

An Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) method was developed for the trace metal characterization of high level waste solutions (HLW) of different origin and the method was validated by analysis of synthetic samples of simulated high level waste solutions (SHLW) from spent fuels of varying composition. In this context, an inter-laboratory comparison exercise (ILCE) was carried out with the simulated HLW of different spent fuel types, viz., research reactor (RR), pressurized heavy water reactor (PHWR) and fast breeder reactor (FBR). An over view of the ICP-AES determination of trace metallic constituents in such SHLW solutions is presented. The overall agreement between the various laboratories was good. (author)

METHODS TO DEVELOP A TOROIDAL SURFACE

Directory of Open Access Journals (Sweden)

DANAILA Ligia

2017-05-01

Full Text Available The paper work presents two practical methods to draw the development of a surface unable to be developed applying classical methods of Descriptive Geometry, the toroidal surface, frequently met in technical practice. The described methods are approximate ones; the development is obtained with the help of points. The accuracy of the methods is given by the number of points used when drawing. As for any other approximate method, when practically manufactured the development may need to be adjusted on site.

Documenting costs and yield of crops of organic origin

Directory of Open Access Journals (Sweden)

J.P. Melnychuk

2016-06-01

Full Text Available The article focuses on the study of primary cost accounting and output of organic crop production. The article has also agreed the key issues that ensure in the primary accounting of organic crop production. For the survey we have used such general scientific methods as induction and deduction, dialectic, historical and systematic methods and some specific methods of accounting which include documentation, inventory, assessment, calculation, accounting records, double entry, balance sheet and financial statements. . As for the documentation of costs and yield of crops of organic origin, it should be noted that documentation is an important method of accounting as it’s the basis of initial observation of commercial operations and it’s a prerequisite for their reflection in accounting. The article has highlighted the features of documenting the posting of production costs and crop production of organic origin, and has also studied the order of registration of land in the operating lease for the production of organic products. The author submits the suggestions for improvement of documenting costs and yields of organic crop production in order to develop reliable information about the costs of production and the grown crop of organic origin for management decision-making.

Evaluation of creep damage development by the replica method; Utvaerdering av krypskadeutveckling med replikmetoden

Energy Technology Data Exchange (ETDEWEB)

Storesund, Jan [Det Norske Veritas AB, Stockholm (Sweden); Roennholm, Markku [Fortum (Sweden)

2002-04-01

Creep damage development in high temperature components can be monitored by the replica method. Damage is classified and an experience based time period for safe operation is recommended where a re-inspection should be conducted. Original recommendations are still commonly used but there are also developed ones are mostly less conservative. A data base of more than 6000 replicas, collected from welded components in Swedish and Finnish power plants, has been evaluated with respect to damage development in the present project. The results are in general in good agreement to the existing developed recommendations for re-inspections. Important factors that should be considered for use of the recommendations are highlighted: Service history, Material, welding and heat treatment, Measure of pressure and temperature, System stresses, Geometrical stress concentrations, stress distributions, Design of components and welds, Creep crack growth, Starts and stops, Extent and performance of the replica method. These factors have been analysed with respect to the evaluated data resulting in comments to the existing recommendations. In addition, recommendations and conditions for a high reliability of the replica method are described. The comments and recommendations can be read in separate sections in the end of the report.

GEM simulation methods development

International Nuclear Information System (INIS)

Tikhonov, V.; Veenhof, R.

2002-01-01

A review of methods used in the simulation of processes in gas electron multipliers (GEMs) and in the accurate calculation of detector characteristics is presented. Such detector characteristics as effective gas gain, transparency, charge collection and losses have been calculated and optimized for a number of GEM geometries and compared with experiment. A method and a new special program for calculations of detector macro-characteristics such as signal response in a real detector readout structure, and spatial and time resolution of detectors have been developed and used for detector optimization. A detailed development of signal induction on readout electrodes and electronics characteristics are included in the new program. A method for the simulation of charging-up effects in GEM detectors is described. All methods show good agreement with experiment

Familial ethnic socialization, gender role attitudes, and ethnic identity development in Mexican-origin early adolescents.

Science.gov (United States)

Sanchez, Delida; Whittaker, Tiffany A; Hamilton, Emma; Arango, Sarah

2017-07-01

This study examined the relations between familial ethnic socialization and ethnic identity development in 438 Mexican-origin (n = 242 boys and n = 196 girls) preadolescents. In addition, machismo and marianismo gender role attitudes were examined as potential mediators in this link. Confirmatory factor analyses (CFA) of the Familial Ethnic Socialization Scale (FES), Machismo Measure (MM), Marianismo Beliefs Scale (MBS), and the Ethnic Identity Brief Scale (EISB) were conducted to test the factor structure with a preadolescent Mexican-origin sample. Separate path analyses of analytic models were then performed on boys and girls. Results of the CFAs for survey measures revealed that for the FES, a 1-factor version indicated acceptable fit; for the MM, the original 2-factor structure indicated acceptable model fit; for the MBS, a revised 3-factor version indicated acceptable model fit; and, for the EISB, the affirmation and resolution dimensions showed acceptable fit. Among boys, FES was significantly and positively linked to caballerismo, and EISB affirmation and resolution; furthermore, the links between FES and EISB affirmation and resolution were indirectly connected by caballerismo. In addition, traditional machismo was negatively linked to EISB affirmation, and caballerismo was positively linked to EISB affirmation and resolution. Among girls, FES was significantly and positively related to the MBS-virtuous/chaste pillar, and EISB affirmation and resolution. The MBS-subordinate to others pillar was negatively linked to EISB affirmation. This study underscores the importance of FES and positive gender role attitudes in the link to ethnic identity development among Mexican-origin preadolescents. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Application of PCA-LDA method to determine the geographical origin of tea based on determination of stable isotopes and multi-elements

International Nuclear Information System (INIS)

Yuan Yuwei; Zhang Yongzhi; Yang Guiling; Zhang Zhiheng; Fu Haiyan; Han Wenyan; Li Shufang

2013-01-01

The ratio of stable isotope and concentration of multi-element in tea was determinated with isotope ratio mass spectrometry (IRMS) and inductively coupled plasma mass spectrometry (ICP-MS). Pattern recognition techniques with principal component analysis (PCA) and linear discriminant analysis (LDA) were used to classify the geographical origins of tea from Fujian, Shandong and Zhejiang province, and Yuyao, Jinhua and Xihu region of Zhejiang. The results showed the values of δ"1"5N, δ"1"3C, δD, δ"1"8O and the ratios of "2"0"6Pb/"2"0"7Pb, "2"0"8Pb/"2"0"6Pb and "8"7Sr/"8"6Sr in tea samples were different from different origins. There was also large variable for the concentrations of 27 mineral elements, such as Li, Be, Na and so on, with a specific character of origin. The method of PCA could be used to classify the geographical origin of tea from different origins but with a cross in the scatter plot. However, PCA combining with LDA could gave correct assignation percentages of 99% for the tea samples among Fujian, Shandong and Zhejiang provinces, and 87% for the tea samples among Yuyao, Jinhua and Xihu region of Zhejiang. These results revealed that it was possible and feasible to classify the geographical origin of tea by the method of PCA-LDA based on the determination of isotopes and multi-elements. (authors)

NASA's Physics of the Cosmos and Cosmic Origins Technology Development Programs

Science.gov (United States)

Pham, Thai; Seery, Bernard; Ganel, Opher

2016-01-01

The strategic astrophysics missions of the coming decades will help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" Enabling these missions requires advances in key technologies far beyond the current state of the art. NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices manage technology maturation projects funded through the Strategic Astrophysics Technology (SAT) program to accomplish such advances. The PCOS and COR Program Offices, residing at the NASA Goddard Space Flight Center (GSFC), were established in 2011, and serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the Programs' technology development activities and the current technology investment portfolio of 23 technology advancements. We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The Programs' priorities are driven by strategic direction from the Astrophysics Division, which is informed by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) 2010 Decadal Survey report [1], the Astrophysics Implementation Plan (AIP) [2] as updated, and the Astrophysics Roadmap "Enduring Quests, Daring Visions" [3]. These priorities include technology development for missions to study dark energy, gravitational waves, X-ray and inflation probe science, and large far-infrared (IR) and ultraviolet (UV)/optical/IR telescopes to conduct imaging and spectroscopy studies. The SAT program is the Astrophysics Division's main investment method to mature technologies

Biometrics and Psychometrics: Origins, Commonalities and Differences

Directory of Open Access Journals (Sweden)

John Gower

2016-09-01

Full Text Available Starting with the common origins of biometrics and psychometrics at the beginning of the twentieth century, the paper compares and contrasts subsequent developments, informed by the author's 35 years at Rothamsted Experimental Station followed by a period with the data theory group in Leiden and thereafter. Although the methods used by biometricians and psychometricians have much in common, there are important differences arising from the different fields of study. Similar differences arise wherever data are generated and may be regarded as a major driving force in the development of statistical ideas.

Methodology for developing new test methods

Directory of Open Access Journals (Sweden)

A. I. Korobko

2017-06-01

Full Text Available The paper describes the methodology for developing new test methods and forming solutions for the development of new test methods. The basis of the methodology for developing new test methods is the individual elements of the system and process approaches. They contribute to the development of an effective research strategy for the object, the study of interrelations, the synthesis of an adequate model of the test method. The effectiveness of the developed test method is determined by the correct choice of the set of concepts, their interrelations and mutual influence. This allows you to solve the tasks assigned to achieve the goal. The methodology is based on the use of fuzzy cognitive maps. The question of the choice of the method on the basis of which the model for the formation of solutions is based is considered. The methodology provides for recording a model for a new test method in the form of a finite set of objects. These objects are significant for the test method characteristics. Then a causal relationship is established between the objects. Further, the values of fitness indicators and the observability of the method and metrological tolerance for the indicator are established. The work is aimed at the overall goal of ensuring the quality of tests by improving the methodology for developing the test method.

A discussion on the origin of quantum probabilities

International Nuclear Information System (INIS)

Holik, Federico; Sáenz, Manuel; Plastino, Angel

2014-01-01

We study the origin of quantum probabilities as arising from non-Boolean propositional-operational structures. We apply the method developed by Cox to non distributive lattices and develop an alternative formulation of non-Kolmogorovian probability measures for quantum mechanics. By generalizing the method presented in previous works, we outline a general framework for the deduction of probabilities in general propositional structures represented by lattices (including the non-distributive case). -- Highlights: •Several recent works use a derivation similar to that of R.T. Cox to obtain quantum probabilities. •We apply Cox’s method to the lattice of subspaces of the Hilbert space. •We obtain a derivation of quantum probabilities which includes mixed states. •The method presented in this work is susceptible to generalization. •It includes quantum mechanics and classical mechanics as particular cases

Quality parameters and pattern recognition methods as a tool in tracing regional origin of multifloral honey

Directory of Open Access Journals (Sweden)

Lazarević Kristina B.

2013-01-01

Full Text Available The characterization of multifloral honey regarding the mineral composition, sugar content and basic physicochemical properties has been done. The total of 164 honey samples was collected from six regions of Serbia during 2009 harvesting season. Univariate data analysis (descriptive statistics and analysis of variance, geographic information system and pattern recognition methods (principal component analysis and cluster analysis have been performed in order to identify geographical origin of honey. The content of Mg, K, and Cu, electrical conductivity, and optical rotation were established as useful indicators in tracing regional differences between honey samples. Samples originated from Zlatibor region were clearly distinguished from those from the rest of Serbia showing higher K and Mg content, as well as higher values of optical rotation, electrical conductivity, and free acidity. The influence of the soil composition, and climate conditions, as well as the presence of particular flora on the honey composition is stressed out. The modeling of geographic origin of honey has been attempted by the means of linear discriminant analysis. [Projekat Ministarstva nauke Republike Srbije, br. 172017 and 451-03-2372-IP i FP7 RegPot project FCUB ERA GA No. 256716

Dormant origins as a built-in safeguard in eukaryotic DNA replication against genome instability and disease development.

Science.gov (United States)

Shima, Naoko; Pederson, Kayla D

2017-08-01

DNA replication is a prerequisite for cell proliferation, yet it can be increasingly challenging for a eukaryotic cell to faithfully duplicate its genome as its size and complexity expands. Dormant origins now emerge as a key component for cells to successfully accomplish such a demanding but essential task. In this perspective, we will first provide an overview of the fundamental processes eukaryotic cells have developed to regulate origin licensing and firing. With a special focus on mammalian systems, we will then highlight the role of dormant origins in preventing replication-associated genome instability and their functional interplay with proteins involved in the DNA damage repair response for tumor suppression. Lastly, deficiencies in the origin licensing machinery will be discussed in relation to their influence on stem cell maintenance and human diseases. Copyright © 2017 Elsevier B.V. All rights reserved.

Detection of Staphylococcus aureus among coagulase positive staphylococci from animal origin based on conventional and molecular methods

Directory of Open Access Journals (Sweden)

Nikolina Velizarova Rusenova

2017-03-01

Full Text Available The present study aimed to detect Staphylococcus aureus (S. aureus among other coagulase positive staphylococci from animal origin by using conventional methods (biochemical tests and latex agglutination and a molecular method, based on the nuc gene, as the gold standard and to assess the usefulness of these methods. For this purpose, total of 344 staphylococcal isolates were collected and analysed. A total of 156 isolates suspicious for S. aureus were detected by a conventional biochemical method – 88 from cows, 18 from goats, 7 from pigs, 17 from poultry, 7 from rabbits and 19 from dogs. The majority of S. aureus strains gave typical biochemical reactions with the exception of 30 (19.2% and 25 (16% that were VP negative and weak positive in fermenting mannitol, respectively. Twelve strains were found to be non-haemolytic (7.7% and four strains did not ferment trehalose (2.6%. Other staphylococci were identified as S. pseudintermedius (n = 103, S. hyicus (n = 23 and the rest were coagulase-negative staphylococci. Latex agglutination test resulted in rapid positive reactions with S. aureus with exception of 5 strains (3.2% from cow mastitis milk. Positive agglutination reactions were also established with S. pseudintermedius, and S. hyicus. PCR confirmed all strains that were preliminary identified as S. aureus by amplification of 270 bp fragment of nuc gene specific for this species. The atypical reactions in certain strains established in this study have shown that the precise detection of S. aureus from animal origin should be done by combination of conventional and molecular methods.

Genomic Analyses Reveal the Influence of Geographic Origin, Migration, and Hybridization on Modern Dog Breed Development

Directory of Open Access Journals (Sweden)

Heidi G. Parker

2017-04-01

Full Text Available There are nearly 400 modern domestic dog breeds with a unique histories and genetic profiles. To track the genetic signatures of breed development, we have assembled the most diverse dataset of dog breeds, reflecting their extensive phenotypic variation and heritage. Combining genetic distance, migration, and genome-wide haplotype sharing analyses, we uncover geographic patterns of development and independent origins of common traits. Our analyses reveal the hybrid history of breeds and elucidate the effects of immigration, revealing for the first time a suggestion of New World dog within some modern breeds. Finally, we used cladistics and haplotype sharing to show that some common traits have arisen more than once in the history of the dog. These analyses characterize the complexities of breed development, resolving longstanding questions regarding individual breed origination, the effect of migration on geographically distinct breeds, and, by inference, transfer of trait and disease alleles among dog breeds.

Original Article

African Journals Online (AJOL)

Administratör

Original Article. Prevalence of Gall Bladder Stones among Type 2 Diabetic ... Increasing age, female gender, overweight, familial history of the disease and type 2 diabetes mellitus is all associated ... GBS development in diabetics. An Italian ...

User Experience Evaluation Methods in Product Development (UXEM'09)

Science.gov (United States)

Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

ORIGINAL ARTICLE

African Journals Online (AJOL)

User

UDS Publishers Limited All Right Reserved 2026-6294. ORIGINAL ... Reproductive development and function in human and other ... sulting solution was filtered and left to stand for three days to ..... male rat brain and pituitary. Brain Res 164,.

Intrinsically bent DNA in replication origins and gene promoters.

Science.gov (United States)

Gimenes, F; Takeda, K I; Fiorini, A; Gouveia, F S; Fernandez, M A

2008-06-24

Intrinsically bent DNA is an alternative conformation of the DNA molecule caused by the presence of dA/dT tracts, 2 to 6 bp long, in a helical turn phase DNA or with multiple intervals of 10 to 11 bp. Other than flexibility, intrinsic bending sites induce DNA curvature in particular chromosome regions such as replication origins and promoters. Intrinsically bent DNA sites are important in initiating DNA replication, and are sometimes found near to regions associated with the nuclear matrix. Many methods have been developed to localize bent sites, for example, circular permutation, computational analysis, and atomic force microscopy. This review discusses intrinsically bent DNA sites associated with replication origins and gene promoter regions in prokaryote and eukaryote cells. We also describe methods for identifying bent DNA sites for circular permutation and computational analysis.

A direct vulnerable atherosclerotic plaque elasticity reconstruction method based on an original material-finite element formulation: theoretical framework

Science.gov (United States)

Bouvier, Adeline; Deleaval, Flavien; Doyley, Marvin M.; Yazdani, Saami K.; Finet, Gérard; Le Floc'h, Simon; Cloutier, Guy; Pettigrew, Roderic I.; Ohayon, Jacques

2013-12-01

The peak cap stress (PCS) amplitude is recognized as a biomechanical predictor of vulnerable plaque (VP) rupture. However, quantifying PCS in vivo remains a challenge since the stress depends on the plaque mechanical properties. In response, an iterative material finite element (FE) elasticity reconstruction method using strain measurements has been implemented for the solution of these inverse problems. Although this approach could resolve the mechanical characterization of VPs, it suffers from major limitations since (i) it is not adapted to characterize VPs exhibiting high material discontinuities between inclusions, and (ii) does not permit real time elasticity reconstruction for clinical use. The present theoretical study was therefore designed to develop a direct material-FE algorithm for elasticity reconstruction problems which accounts for material heterogeneities. We originally modified and adapted the extended FE method (Xfem), used mainly in crack analysis, to model material heterogeneities. This new algorithm was successfully applied to six coronary lesions of patients imaged in vivo with intravascular ultrasound. The results demonstrated that the mean relative absolute errors of the reconstructed Young's moduli obtained for the arterial wall, fibrosis, necrotic core, and calcified regions of the VPs decreased from 95.3±15.56%, 98.85±72.42%, 103.29±111.86% and 95.3±10.49%, respectively, to values smaller than 2.6 × 10-8±5.7 × 10-8% (i.e. close to the exact solutions) when including modified-Xfem method into our direct elasticity reconstruction method.

Development of Advanced Life Cycle Costing Methods for Technology Benefit/Cost/Risk Assessment

Science.gov (United States)

Yackovetsky, Robert (Technical Monitor)

2002-01-01

The overall objective of this three-year grant is to provide NASA Langley's System Analysis Branch with improved affordability tools and methods based on probabilistic cost assessment techniques. In order to accomplish this objective, the Aerospace Systems Design Laboratory (ASDL) needs to pursue more detailed affordability, technology impact, and risk prediction methods and to demonstrate them on variety of advanced commercial transports. The affordability assessment, which is a cornerstone of ASDL methods, relies on the Aircraft Life Cycle Cost Analysis (ALCCA) program originally developed by NASA Ames Research Center and enhanced by ASDL. This grant proposed to improve ALCCA in support of the project objective by updating the research, design, test, and evaluation cost module, as well as the engine development cost module. Investigations into enhancements to ALCCA include improved engine development cost, process based costing, supportability cost, and system reliability with airline loss of revenue for system downtime. A probabilistic, stand-alone version of ALCCA/FLOPS will also be developed under this grant in order to capture the uncertainty involved in technology assessments. FLOPS (FLight Optimization System program) is an aircraft synthesis and sizing code developed by NASA Langley Research Center. This probabilistic version of the coupled program will be used within a Technology Impact Forecasting (TIF) method to determine what types of technologies would have to be infused in a system in order to meet customer requirements. A probabilistic analysis of the CER's (cost estimating relationships) within ALCCA will also be carried out under this contract in order to gain some insight as to the most influential costs and the impact that code fidelity could have on future RDS (Robust Design Simulation) studies.

Negotiating a Systems Development Method

Science.gov (United States)

Karlsson, Fredrik; Hedström, Karin

Systems development methods (or methods) are often applied in tailored version to fit the actual situation. Method tailoring is in most the existing literature viewed as either (a) a highly rational process with the method engineer as the driver where the project members are passive information providers or (b) an unstructured process where the systems developer makes individual choices, a selection process without any driver. The purpose of this chapter is to illustrate that important design decisions during method tailoring are made by project members through negotiation. The study has been carried out using the perspective of actor-network theory. Our narratives depict method tailoring as more complex than (a) and (b) show the driver role rotates between the project members, and design decisions are based on influences from several project members. However, these design decisions are not consensus decisions.

Origin Discrimination of Osmanthus fragrans var. thunbergii Flowers using GC-MS and UPLC-PDA Combined with Multivariable Analysis Methods.

Science.gov (United States)

Zhou, Fei; Zhao, Yajing; Peng, Jiyu; Jiang, Yirong; Li, Maiquan; Jiang, Yuan; Lu, Baiyi

2017-07-01

Osmanthus fragrans flowers are used as folk medicine and additives for teas, beverages and foods. The metabolites of O. fragrans flowers from different geographical origins were inconsistent in some extent. Chromatography and mass spectrometry combined with multivariable analysis methods provides an approach for discriminating the origin of O. fragrans flowers. To discriminate the Osmanthus fragrans var. thunbergii flowers from different origins with the identified metabolites. GC-MS and UPLC-PDA were conducted to analyse the metabolites in O. fragrans var. thunbergii flowers (in total 150 samples). Principal component analysis (PCA), soft independent modelling of class analogy analysis (SIMCA) and random forest (RF) analysis were applied to group the GC-MS and UPLC-PDA data. GC-MS identified 32 compounds common to all samples while UPLC-PDA/QTOF-MS identified 16 common compounds. PCA of the UPLC-PDA data generated a better clustering than PCA of the GC-MS data. Ten metabolites (six from GC-MS and four from UPLC-PDA) were selected as effective compounds for discrimination by PCA loadings. SIMCA and RF analysis were used to build classification models, and the RF model, based on the four effective compounds (caffeic acid derivative, acteoside, ligustroside and compound 15), yielded better results with the classification rate of 100% in the calibration set and 97.8% in the prediction set. GC-MS and UPLC-PDA combined with multivariable analysis methods can discriminate the origin of Osmanthus fragrans var. thunbergii flowers. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Developments in geophysical exploration methods

CERN Document Server

1982-01-01

One of the themes in current geophysical development is the bringing together of the results of observations made on the surface and those made in the subsurface. Several benefits result from this association. The detailed geological knowledge obtained in the subsurface can be extrapolated for short distances with more confidence when the geologi­ cal detail has been related to well-integrated subsurface and surface geophysical data. This is of value when assessing the characteristics of a partially developed petroleum reservoir. Interpretation of geophysical data is generally improved by the experience of seeing the surface and subsurface geophysical expression of a known geological configuration. On the theoretical side, the understanding of the geophysical processes themselves is furthered by the study of the phenomena in depth. As an example, the study of the progress of seismic wave trains downwards and upwards within the earth has proved most instructive. This set of original papers deals with some of ...

Congenital heart disease with high origin of coronary artery

International Nuclear Information System (INIS)

Zhu Ming; Li Yuhua; Zhong Yumin

2002-01-01

Objective: To report 6 cases of congenital heart disease with high origin of coronary artery and to evaluate the imaging method for diagnosis of congenital high origin of coronary artery. Methods: Six patients with congenital high origin of coronary artery underwent angiocardiography, echocardiography, and 2 patients also underwent magnetic resonance examination. All 6 cases were confirmed by operation. Results: All 6 cases were congenital high origin of right coronary artery. Angiocardiography made correct diagnosis in all 6 cases; MRI made the correct diagnosis in 1 of the 2 cases; echocardiography made 1 correct diagnosis. Conclusion: Correct diagnosis of congenital high origin of coronary artery was very important for patients with congenital heart disease. Angiocardiography was a very reliable imaging method and MRI can play an important role in preoperative diagnosis of congenital high origin of coronary artery

Experimentally aided development of a turbine heat transfer prediction method

International Nuclear Information System (INIS)

Forest, A.E.; White, A.J.; Lai, C.C.; Guo, S.M.; Oldfield, M.L.G.; Lock, G.D.

2004-01-01

In the design of cooled turbomachinery blading a central role is played by the computer methods used to optimise the aerodynamic and thermal performance of the turbine aerofoils. Estimates of the heat load on the turbine blading should be as accurate as possible, in order that adequate life may be obtained with the minimum cooling air requirement. Computer methods are required which are able to model transonic flows, which are a mixture of high temperature combustion gases and relatively cool air injected through holes in the aerofoil surface. These holes may be of complex geometry, devised after empirical studies of the optimum shape and the most cost effective manufacturing technology. The method used here is a further development of the heat transfer design code (HTDC), originally written by Rolls-Royce plc under subcontract to Rolls-Royce Inc for the United States Air Force. The physical principles of the modelling employed in the code are explained without extensive mathematical details. The paper describes the calibration of the code in conjunction with a series of experimental measurements on a scale model of a high-pressure nozzle guide vane at non-dimensionally correct engine conditions. The results are encouraging, although indicating that some further work is required in modelling highly accelerated pressure surface flow

Development and application of methods and computer codes of fuel management and nuclear design of reload cycles in PWR

International Nuclear Information System (INIS)

Ahnert, C.; Aragones, J.M.; Corella, M.R.; Esteban, A.; Martinez-Val, J.M.; Minguez, E.; Perlado, J.M.; Pena, J.; Matias, E. de; Llorente, A.; Navascues, J.; Serrano, J.

1976-01-01

Description of methods and computer codes for Fuel Management and Nuclear Design of Reload Cycles in PWR, developed at JEN by adaptation of previous codes (LEOPARD, NUTRIX, CITATION, FUELCOST) and implementation of original codes (TEMP, SOTHIS, CICLON, NUDO, MELON, ROLLO, LIBRA, PENELOPE) and their application to the project of Management and Design of Reload Cycles of a 510 Mwt PWR, including comparison with results of experimental operation and other calculations for validation of methods. (author) [es

Development of an efficient retrotransposon-based fingerprinting method for rapid pea variety identification.

Science.gov (United States)

Smýkal, Petr

2006-01-01

Fast and efficient DNA fingerprinting of crop cultivars and individuals is frequently used in both theoretical population genetics and in practical breeding. Numerous DNA marker technologies exist and the ratio of speed, cost and accuracy are of importance. Therefore even in species where highly accurate and polymorphic marker systems are available, such as microsatellite SSR (simple sequence repeats), also alternative methods may be of interest. Thanks to their high abundance and ubiquity, temporary mobile retrotransposable elements come into recent focus. Their properties, such as genome wide distribution and well-defined origin of individual insertions by descent, predetermine them for use as molecular markers. In this study, several Ty3-gypsy type retrotransposons have been developed and adopted for the inter-retrotransposon amplified polymorphism (IRAP) method, which is suitable for fast and efficient pea cultivar fingerprinting. The method can easily distinguish even between genetically closely related pea cultivars and provide high polymorphic information content (PIC) in a single PCR analysis.

Method Engineering: Engineering of Information Systems Development Methods and Tools

NARCIS (Netherlands)

Brinkkemper, J.N.; Brinkkemper, Sjaak

1996-01-01

This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

Selection and authentication of botanical materials for the development of analytical methods.

Science.gov (United States)

Applequist, Wendy L; Miller, James S

2013-05-01

Herbal products, for example botanical dietary supplements, are widely used. Analytical methods are needed to ensure that botanical ingredients used in commercial products are correctly identified and that research materials are of adequate quality and are sufficiently characterized to enable research to be interpreted and replicated. Adulteration of botanical material in commerce is common for some species. The development of analytical methods for specific botanicals, and accurate reporting of research results, depend critically on correct identification of test materials. Conscious efforts must therefore be made to ensure that the botanical identity of test materials is rigorously confirmed and documented through preservation of vouchers, and that their geographic origin and handling are appropriate. Use of material with an associated herbarium voucher that can be botanically identified is always ideal. Indirect methods of authenticating bulk material in commerce, for example use of organoleptic, anatomical, chemical, or molecular characteristics, are not always acceptable for the chemist's purposes. Familiarity with botanical and pharmacognostic literature is necessary to determine what potential adulterants exist and how they may be distinguished.

Moral counselling: a method in development.

Science.gov (United States)

de Groot, Jack; Leget, Carlo

2011-01-01

This article describes a method of moral counselling developed in the Radboud University Medical Centre Nijmegen (The Netherlands). The authors apply insights of Paul Ricoeur to the non-directive counselling method of Carl Rogers in their work of coaching patients with moral problems in health care. The developed method was shared with other health care professionals in a training course. Experiences in the course and further practice led to further improvement of the method.

Development of analytical methods for iodine speciation in fresh water

International Nuclear Information System (INIS)

Takaku, Yuichi; Ohtsuka, Yoshihito; Hisamatsu, Shun'ichi

2007-01-01

Analytical methods for physicochemical speciation of iodine in fresh water samples were developed to elucidate its behavior in the environment. The methods combined inductively coupled plasma mass spectrometry (ICP-MS) with size exclusion high performance liquid chromatography (SEC) or capillary electrophoresis (CE). Freshwater samples were collected from Lake Towada and rivers surrounding the lake. After filtration through a 0.45 μm pore size membrane filter, iodine in the water samples was pre-concentrated with an ultra-filtration filter which had a cut-off size of 10 kDa. The fraction with molecular size over 10 kDa was concentrated to 100 times in the original water, and then introduced into the SEC-ICP-MS. Molecular size chromatograms of all river and lake water samples showed two peaks for iodine concentrations: 40 kDa and 20 kDa. The method for separately determining two valence states of inorganic iodine, I - and IO 3 - , was also developed using the CE-ICP-MS system and it was successfully applied to the fresh water samples. Analysis results of surface water samples in Lake Towada and rivers surrounding the lake indicated that the chemical form of inorganic iodine in all samples was IO 3 - . Additional lake water samples were collected from Lake O-ike-higashi in the Juni-ko area at Shirakami-Sanchi, which is a UNESCO natural world heritage. The lake has a strong thermocline during all seasons; its bottom layer is in a highly reductive state. Depth profiles of I - and IO 3 - clearly showed that I - was not detected in the surface layer, but it was predominant in the bottom layer, and vice versa for IO 3 - . As this separation method is rapid and sensitive, it will be widely used in the future. (author)

Combining microscopy with spectroscopic and chemical methods for tracing the origin of atmospheric fallouts from mining sites

Energy Technology Data Exchange (ETDEWEB)

Navel, Aline; Uzu, Gaëlle; Spadini, Lorenzo [University Grenoble Alpes — LTHE UMR 5564–CNRS-INSU/UGA/INPG/IRD, 1025 rue de la Piscine, DU BP53 - 38041 Grenoble CEDEX 9 (France); Sobanska, Sophie [LASIR, (UMR CNRS 8516), Université de Lille 1, Bât. C5, 59655 Villeneuve d' Ascq CEDEX (France); Martins, Jean M.F., E-mail: jean.martins@yujf-grenoble.fr [University Grenoble Alpes — LTHE UMR 5564–CNRS-INSU/UGA/INPG/IRD, 1025 rue de la Piscine, DU BP53 - 38041 Grenoble CEDEX 9 (France)

2015-12-30

Highlights: • Numerous ancient mines are left over without specific care for contaminated wastes. • Sources similarity makes the tracing of the origin of metallic fallouts challenging. • Physico-chemical fingerprints of all metal-source sites and fallouts were established. • Combining physical/chemical methods allowed discriminating polluted fallouts origin. • A Hierarchical cluster analysis permitted to identify the dominant particles source. - Abstract: Populations living close to mining sites are often exposed to important heavy metal concentrations, especially through atmospheric fallouts. Identifying the main sources of metal-rich particles remains a challenge because of the similarity of the particle signatures from the polluted sites. This work provides an original combination of physical and chemical methods to determine the main sources of airborne particles impacting inhabited zones. Raman microspectrometry (RMS), X-ray diffraction (DRX), morphology analyses by microscopy and chemical composition were assessed. Geochemical analysis allowed the identification of target and source areas; XRD and RMS analysis identified the main mineral phases in association with their metal content and speciation. The characterization of the dominant minerals was combined with particle morphology analysis to identify fallout sources. The complete description of dust morphologies permitted the successful determination of a fingerprint of each source site. The analysis of these chemical and morphological fingerprints allowed identification of the mine area as the main contributor of metal-rich particles impacting the inhabited zone. In addition to the identification of the main sources of airborne particles, this study will also permit to better define the extent of polluted zones requiring remediation or protection from eolian erosion inducing metal-rich atmospheric fallouts.

Combining microscopy with spectroscopic and chemical methods for tracing the origin of atmospheric fallouts from mining sites

International Nuclear Information System (INIS)

Navel, Aline; Uzu, Gaëlle; Spadini, Lorenzo; Sobanska, Sophie; Martins, Jean M.F.

2015-01-01

Highlights: • Numerous ancient mines are left over without specific care for contaminated wastes. • Sources similarity makes the tracing of the origin of metallic fallouts challenging. • Physico-chemical fingerprints of all metal-source sites and fallouts were established. • Combining physical/chemical methods allowed discriminating polluted fallouts origin. • A Hierarchical cluster analysis permitted to identify the dominant particles source. - Abstract: Populations living close to mining sites are often exposed to important heavy metal concentrations, especially through atmospheric fallouts. Identifying the main sources of metal-rich particles remains a challenge because of the similarity of the particle signatures from the polluted sites. This work provides an original combination of physical and chemical methods to determine the main sources of airborne particles impacting inhabited zones. Raman microspectrometry (RMS), X-ray diffraction (DRX), morphology analyses by microscopy and chemical composition were assessed. Geochemical analysis allowed the identification of target and source areas; XRD and RMS analysis identified the main mineral phases in association with their metal content and speciation. The characterization of the dominant minerals was combined with particle morphology analysis to identify fallout sources. The complete description of dust morphologies permitted the successful determination of a fingerprint of each source site. The analysis of these chemical and morphological fingerprints allowed identification of the mine area as the main contributor of metal-rich particles impacting the inhabited zone. In addition to the identification of the main sources of airborne particles, this study will also permit to better define the extent of polluted zones requiring remediation or protection from eolian erosion inducing metal-rich atmospheric fallouts.

Reactor physics methods development at Westinghouse

International Nuclear Information System (INIS)

Mueller, E.; Mayhue, L.; Zhang, B.

2007-01-01

The current state of reactor physics methods development at Westinghouse is discussed. The focus is on the methods that have been or are under development within the NEXUS project which was launched a few years ago. The aim of this project is to merge and modernize the methods employed in the PWR and BWR steady-state reactor physics codes of Westinghouse. (author)

A powerful parent-of-origin effects test for qualitative traits on X chromosome in general pedigrees.

Science.gov (United States)

Zou, Qi-Lei; You, Xiao-Ping; Li, Jian-Long; Fung, Wing Kam; Zhou, Ji-Yuan

2018-01-05

Genomic imprinting is one of the well-known epigenetic factors causing the association between traits and genes, and has generally been examined by detecting parent-of-origin effects of alleles. A lot of methods have been proposed to test for parent-of-origin effects on autosomes based on nuclear families and general pedigrees. Although these parent-of-origin effects tests on autosomes have been available for more than 15 years, there has been no statistical test developed to test for parent-of-origin effects on X chromosome, until the parental-asymmetry test on X chromosome (XPAT) and its extensions were recently proposed. However, these methods on X chromosome are only applicable to nuclear families and thus are not suitable for general pedigrees. In this article, we propose the pedigree parental-asymmetry test on X chromosome (XPPAT) statistic to test for parent-of-origin effects in the presence of association, which can accommodate general pedigrees. When there are missing genotypes in some pedigrees, we further develop the Monte Carlo pedigree parental-asymmetry test on X chromosome (XMCPPAT) to test for parent-of-origin effects, by inferring the missing genotypes given the observed genotypes based on a Monte Carlo estimation. An extensive simulation study has been carried out to investigate the type I error rates and the powers of the proposed tests. Our simulation results show that the proposed methods control the size well under the null hypothesis of no parent-of-origin effects. Moreover, XMCPPAT substantially outperforms the existing tests and has a much higher power than XPPAT which only uses complete nuclear families (with both parents) from pedigrees. We also apply the proposed methods to analyze rheumatoid arthritis data for their practical use. The proposed XPPAT and XMCPPAT test statistics are valid and powerful in detecting parent-of-origin effects on X chromosome for qualitative traits based on general pedigrees and thus are recommended.

Experimental methods for in situ studies of morphology development during flow

DEFF Research Database (Denmark)

Lyngaae-Jørgensen, Jørgen

1996-01-01

A short overview of in situ methods is given. Multiple laminates of thin films is believed to represent unstable transition structures in many processing operations. A hypotesis for the break up is that first thin cylinders are formed . At a later stage these cylinders break up to spheres...... breakup mechanism involving creation of parallel layers of thin, filmlike formations parallel with the original film is observed. These layers then break up to a final state encompasing nearly spherical drops spread over a thickness much larger (by orders of magnitude) than the original film thickness....

Development methods for VLSI-processors

International Nuclear Information System (INIS)

Horninger, K.; Sandweg, G.

1982-01-01

The aim of this project, which was originally planed for 3 years, was the development of modern system and circuit concepts, for VLSI-processors having a 32 bit wide data path. The result of this first years work is the concept of a general purpose processor. This processor is not only logically but also physically (on the chip) divided into four functional units: a microprogrammable instruction unit, an execution unit in slice technique, a fully associative cache memory and an I/O unit. For the ALU of the execution unit circuits in PLA and slice techniques have been realized. On the basis of regularity, area consumption and achievable performance the slice technique has been prefered. The designs utilize selftesting circuitry. (orig.) [de

Improving Software Developer's Competence

DEFF Research Database (Denmark)

Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

2002-01-01

Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

Gerald Caplan: A Tribute to the Originator of Mental Health Consultation

Science.gov (United States)

Erchul, William P.

2009-01-01

Gerald Caplan (1917-2008), world-renowned child and community psychiatrist, was the originator of the modern practice of mental health consultation. In addition to consultation, Caplan developed and refined many conceptual models and methods for practice for use in community mental health, psychology, and education. This tribute article focuses on…

Prognostic aspects of imaging method development

International Nuclear Information System (INIS)

Steinhart, L.

1987-01-01

A survey is presented of X-ray diagnostic methods and techniques and possibilities of their further development. Promising methods include direct imaging using digital radiography. In connection with computer technology these methods achieve higher resolution. The storage of obtained images in the computer memory will allow automated processing and evaluation and the use of expert systems. Development is expected to take place especially in computerized tomography using magnetic resonance, and positron computed tomography and other non-radioactive diagnostic methods. (J.B.). 5 figs., 1 tab., 1 ref

The origins, early development and status of Bourdieu's concept of 'cultural capital'.

Science.gov (United States)

Robbins, Derek

2005-03-01

The paper examines the context of the first introduction of the concept of 'cultural capital' in the sociology of education analyses undertaken in the early 1960s and published by Bourdieu in collaboration with Jean-Claude Passeron in 'Les etudiants et leurs etudes' (1964a) and Les Heritiers (1964b). It first considers the cultural contexts within which Bourdieu's thinking about culture originated--both in relation to his social origins and in relation to his intellectual training. It then examines the extent to which Bourdieu's early anthropological research in Algeria was influenced by his knowledge of American acculturation theory. It concludes that Bourdieu sought to use acculturation theory in a distinctive way--one which he articulated more confidently as he explored the relationship between agency and structural explanation in the late 1960s and early 1970s. The specific educational researches which stimulated the articulation of the concept of 'linguistic' or 'cultural' capital belonged to the period in which Bourdieu was only just beginning to refine his post-structuralist philosophy of social scientific explanation. To use these concepts now involves deploying them reflexively in accordance with Bourdieu's later thinking rather than at face value as they were first developed during the period in which he and Passeron were 'apprentice' researchers.

SU-F-J-223: Patterns of Failure for Laryngeal Cancer Patients Treated with Definitive IMRT: Comparing Two Different Methods for Determining the Origin of Recurrence From Follow-Up PET/CT Scans

Energy Technology Data Exchange (ETDEWEB)

Brodin, P; Guha, C; Tome, W [Albert Einstein College of Medicine and Montefiore Medical Center, Bronx, New York (United States); Kabarriti, R; Kalnicki, S; Garg, M [Montefiore Medical Center, Bronx, New York (United States); Vogelius, I [Rigshospitalet, Copenhagen University Hospital, Copenhagen (Denmark)

2016-06-15

Purpose: To determine patterns of failure in laryngeal cancer treated with definitive IMRT by comparing two different methods for identifying the recurrence epicenter on follow-up PET/CT. Methods: We identified 20 patients treated for laryngeal squamous cell carcinoma with definitive IMRT who had loco-regional recurrence diagnosed on PET/CT. Recurrence PET/CT scans were co-registered with the original treatment planning CT using deformable image registration with the VoxAlign deformation engine in MIM Software. Recurrence volumes were delineated on co-registered follow-up scans using a semi-automatic PETedge tool and two separate methods were used to identify the recurrence point of origin: a) Finding the point within the recurrence volume for which the maximum distance to the surface of the surrounding recurrence volume is smaller than for any other point. b) Finding the point within the recurrence volume with the maximum standardized uptake value (SUVmax), without geometric restrictions.For each method the failure pattern was determined as whether the recurrence origin fell within the original high-dose target volumes GTV70, CTV70, PTV70 (receiving 70Gy), intermediate-risk PTV59 (receiving 59.4Gy) or low-risk PTV54 (receiving 54.1Gy), in the original treatment planning CT. Results: 23 primary/nodal recurrences from the 20 patients were analyzed. The three-dimensional distance between the two different origins was on average 10.5mm (std.dev. 10mm). Most recurrences originated in the high-dose target volumes for both methods with 13 (57%) and 11 (48%) in the GTV70 and 20 (87%) and 20 (87%) in the PTV70 for method a) and b), respectively. There was good agreement between the two methods in classifying the origin target volumes with 69% concordance for GTV70, 89% for CTV70 and 100% for PTV70. Conclusion: With strong agreement in patterns of failure between two separate methods for determining recurrence origin, we conclude that most recurrences occurred within the

The Influences of the Family of Origin on Career Development: A Review and Analysis. Major Contribution

Science.gov (United States)

Whiston, Susan C.; Keller, Briana K.

2004-01-01

Based on a developmental contextual perspective advocated by Vondracek, Lerner, and Schulenberg, this article provides a comprehensive review of the research published since 1980 related to family of origin influences on career development and occupational choice. Because individuals are most likely to seek assistance with career decisions from…

Efficient Identification of miRNAs for Classification of Tumor Origin

DEFF Research Database (Denmark)

Søkilde, Rolf; Vincent, Martin; Møller, Anne K

2014-01-01

Carcinomas of unknown primary origin constitute 3% to 5% of all newly diagnosed metastatic cancers, with the primary source difficult to classify with current histological methods. Effective cancer treatment depends on early and accurate identification of the tumor; patients with metastases...... of unknown origin have poor prognosis and short survival. Because miRNA expression is highly tissue specific, the miRNA profile of a metastasis may be used to identify its origin. We therefore evaluated the potential of miRNA profiling to identify the primary tumor of known metastases. Two hundred eight...... formalin-fixed, paraffin-embedded samples, representing 15 different histologies, were profiled on a locked nucleic acid-enhanced microarray platform, which allows for highly sensitive and specific detection of miRNA. On the basis of these data, we developed and cross-validated a novel classification...

Nuclear methods in national development

International Nuclear Information System (INIS)

1993-01-01

This volume of the proceedings of the First National Conference on Nuclear Methods held at Kongo Conference Hotel Zaria from 2-4 September 1993, contains the full text of about 30 technical papers and speeches of invited dignitaries presented at the conference. The technical papers are original or review articles containing results and experiences in nuclear and related analytical techniques. Topics treated include neutron generator operation and control, nuclear data, application of nuclear techniques in environment, geochemistry, medicine, biology, agriculture, material science and industries. General topics in nuclear laboratory organization and research experiences were also covered. The papers were fully discussed during the conference and authors were requested to make changes in the manuscripts where necessary. However, they were further edited. The organizing committee wishes to thank all authors for their presentation and cooperation in submitting their manuscripts promptly and the participants for their excellent contribution during the conference

Development of partitioning method

International Nuclear Information System (INIS)

Kubota, Kazuo; Dojiri, Shigeru; Kubota, Masumitsu

1988-10-01

The literature survey was carried out on the amount of natural resources, behaviors in reprocessing process and in separation and recovery methods of the platinum group elements and technetium which are contained in spent fuel. The essential results are described below. (1) The platinum group elements, which are contained in spent fuel, are quantitatively limited, compared with total demand for them in Japan. And estimated separation and recovery cost is rather high. In spite of that, development of these techniques is considered to be very important because the supply of these elements is almost from foreign resources in Japan. (2) For recovery of these elements, studies of recovery from undisolved residue and from high level liquid waste (HLLW) also seem to be required. (3) As separation and recovery methods, following techniques are considered to be effective; lead extraction, liquid metal extraction, solvent extraction, ion-exchange, adsorption, precipitation, distillation, electrolysis or their combination. (4) But each of these methods has both advantages and disadvantages. So development of such processes largely depends on future works. (author) 94 refs

Method Engineering: Engineering of Information Systems Development Methods and Tools

OpenAIRE

Brinkkemper, J.N.; Brinkkemper, Sjaak

1996-01-01

This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

The Halo Model of Origin Images

DEFF Research Database (Denmark)

Josiassen, Alexander; Lukas, Bryan A.; Whitwell, Gregory J.

2013-01-01

National origin has gained importance as a marketing tool for practitioners to sell their goods and services. However, because origin-image research has been troubled by several fundamental limitations, academia has become sceptical of the current status and strategic implications of the concept....... The aim of this paper was threefold, namely, to provide a state-of-the-art review of origin-image research in marketing, develop and empirically test a new origin-image model and, present the implications of the study....

ORIGINAL ARTICLE

African Journals Online (AJOL)

User

source of blood supply whilst in developed countries VNRDs are the major source. This study de- termined and ... UDS Publishers Limited All Right Reserved 2026-6294. ORIGINAL ..... ferral rate of females in comparison to males as pre- .... nors at blood bank of a medical college,. Australia. Med J Armed Forces 61: 131- 4.

Cultural-historical and cognitive approaches to understanding the origins of development of written speech

Directory of Open Access Journals (Sweden)

L.F. Obukhova

2014-08-01

Full Text Available We present an analysis of the emergence and development of written speech, its relationship to the oral speech, connections to the symbolic and modeling activities of preschool children – playing and drawing. While a child's drawing is traditionally interpreted in psychology either as a measure of intellectual development, or as a projective technique, or as a criterion for creative giftedness of the child, in this article, the artistic activity is analyzed as a prerequisite for development of written speech. The article substantiates the hypothesis that the mastery of “picture writing” – the ability to display the verbal content in a schematic picturesque plan – is connected to the success of writing speech at school age. Along with the classical works of L.S. Vygotsky, D.B. Elkonin, A.R. Luria, dedicated to finding the origins of writing, the article presents the current Russian and foreign frameworks of forming the preconditions of writing, based on the concepts of cultural-historical theory (“higher mental functions”, “zone of proximal development”, etc.. In Western psychology, a number of pilot studies used the developmental function of drawing for teaching the written skills to children of 5-7 years old. However, in cognitive psychology, relationship between drawing and writing is most often reduced mainly to the analysis of general motor circuits. Despite the recovery in research on writing and its origins in the last decade, either in domestic or in foreign psychology, the written speech is not a sufficiently studied problem.

Novel Computational Methods that Facilitate Development of Cyanofactories for Free Fatty Acid Production

KAUST Repository

Motwalli, Olaa Amin

2017-05-28

Finding a source from which high-energy-density biofuels can be derived at an industrial scale has become an urgent challenge for renewable energy production. Some microorganisms can produce free fatty acids (FFA) as precursors towards such high-energy-density biofuels. In particular, photosynthetic cyanobacteria are capable of directly converting carbon dioxide into FFA. However, current engineered strains need several rounds of engineering to reach the level of FFA production for it to be commercially viable. Thus, new chassis strains that require less engineering are needed. Although more than 140 cyanobacterial genomes are sequenced, the natural potential of these strains for FFA production and excretion has not been systematically estimated. In relation to the above-mentioned problems, we developed the first in silico screening method (FFASC) that evaluates the cyanobacterial strains’ potential for FFA production based on the strains’ proteome, which for the first time allows non-experimental selection of the most promising chassis for cyanofactories. The solution is based on the original problem formulation, optimization and ranking. To provide developers and researchers easy means for evaluation and assessment of the cyanobacterial strains potential for production of FFA, we developed the BioPS platform. In addition to being able to compare capacity for FFA production of any novel strain against 140 pre-valuate strains, BioPS can be used to explore characteristics and assessment rules in play for an individual strain. This is the first tool of this type developed. Finally, we developed a novel generic in silico method (PathDES) for ranking and selection of the most suitable pathways / sets of metabolic reactions, which suggests genetic modifications for improved metabolic productivity. The method heavily relies on optimization and integration of disparate information in a novel manner. It has been successfully used in connection with FFASC for design of

Early fractionation methods and the origins of the NSD concept

International Nuclear Information System (INIS)

Thames, H.D. Jr.

1988-01-01

The concept of the time factor in radiotherapy originated in the controversy surrounding single-dose and fractionated treatments during the first 20 years of this century. The success of Coutard's fractionated treatments of larynx tumors was an important factor in the abandonment of single-dose treatments. There was considerable research afterwards into the influence of dose rate and overall time of treatment on the responses of normal tissues. Recovery was modeled in terms of the Schwarzschild law of photochemistry, as exemplified by the analysis of Strandqvist in log dose-log time coordinates. Different conventions were followed in defining the time for a single-dose treatment. Subsequently the concept arose that the slopes of isoeffect lines relating dose and treatment time for normal tissues and tumors were different and moreover that the effects of fraction number and overall time could be separated; these developments constituted the foundation of the Ellis NSD model. It had an important influence on clinical practice and was reasonably successful in predicting isoeffective regimens for acute effects. It failed to predict severe late effects after large dose fractions. The dissociation between acute and late effects with altered fractionation led to recognition of the importance of the ratio α/β in characterizing the fractionation sensitivity of tissues. (orig.) With 125 refs

Determination of the origin of unknown irradiated nuclear fuel.

Science.gov (United States)

Nicolaou, G

2006-01-01

An isotopic fingerprinting method is presented to determine the origin of unknown nuclear material with forensic importance. Spent nuclear fuel of known origin has been considered as the 'unknown' nuclear material in order to demonstrate the method and verify its prediction capabilities. The method compares, using factor analysis, the measured U, Pu isotopic compositions of the 'unknown' material with U, Pu isotopic compositions simulating well known spent fuels from a range of commercial nuclear power stations. Then, the 'unknown' fuel has the same origin as the commercial fuel with which it exhibits the highest similarity in U, Pu compositions.

Determination of the origin of unknown irradiated nuclear fuel

International Nuclear Information System (INIS)

Nicolaou, G.

2006-01-01

An isotopic fingerprinting method is presented to determine the origin of unknown nuclear material with forensic importance. Spent nuclear fuel of known origin has been considered as the 'unknown' nuclear material in order to demonstrate the method and verify its prediction capabilities. The method compares, using factor analysis, the measured U, Pu isotopic compositions of the 'unknown' material with U, Pu isotopic compositions simulating well known spent fuels from a range of commercial nuclear power stations. Then, the 'unknown' fuel has the same origin as the commercial fuel with which it exhibits the highest similarity in U, Pu compositions

Life Origination Hydrate Hypothesis (LOH-Hypothesis

Directory of Open Access Journals (Sweden)

Victor Ostrovskii

2012-01-01

Full Text Available The paper develops the Life Origination Hydrate Hypothesis (LOH-hypothesis, according to which living-matter simplest elements (LMSEs, which are N-bases, riboses, nucleosides, nucleotides, DNA- and RNA-like molecules, amino-acids, and proto-cells repeatedly originated on the basis of thermodynamically controlled, natural, and inevitable processes governed by universal physical and chemical laws from CH4, niters, and phosphates under the Earth's surface or seabed within the crystal cavities of the honeycomb methane-hydrate structure at low temperatures; the chemical processes passed slowly through all successive chemical steps in the direction that is determined by a gradual decrease in the Gibbs free energy of reacting systems. The hypothesis formulation method is based on the thermodynamic directedness of natural movement and consists ofan attempt to mentally backtrack on the progression of nature and thus reveal principal milestones alongits route. The changes in Gibbs free energy are estimated for different steps of the living-matter origination process; special attention is paid to the processes of proto-cell formation. Just the occurrence of the gas-hydrate periodic honeycomb matrix filled with LMSEs almost completely in its final state accounts for size limitation in the DNA functional groups and the nonrandom location of N-bases in the DNA chains. The slowness of the low-temperature chemical transformations and their “thermodynamic front” guide the gross process of living matter origination and its successive steps. It is shown that the hypothesis is thermodynamically justified and testable and that many observed natural phenomena count in its favor.

Gene-associated markers can assign origin in a weakly structured fish, Atlantic herring

DEFF Research Database (Denmark)

Bekkevold, Dorte; Helyar, Sarah J.; Limborg, Morten T.

2015-01-01

, there are relatively few examples in marine fish displaying accurate origin assignment. We synthesize data for 156 single-nucleotide polymorphisms typed in 1039 herring, Clupea harengus L., spanning the Northeast Atlantic to develop a tool that allows assignment of individual herring to their regional origin. We show......Regulations on the exploitation of populations of commercially important fish species and the ensuing consumer interest in sustainable products have increased the need to accurately identify the population of origin of fish and fish products. Although genomics-based tools have proven highly useful...... the method's suitability to address specific biological questions, as well as management applications. We analyse temporally replicated collections from two areas, the Skagerrak (n = 81, 84, 66) and the western Baltic (n = 52, 52). Both areas harbour heavily fished mixed-origin stocks, complicating...

Application of best-worst method in evaluation of medical tourism development strategy

Directory of Open Access Journals (Sweden)

Farzaneh Abouhashem Abadi

2018-01-01

Full Text Available Medical tourism industry is an international phenomenon, which most of medical tourists for some reasons such as high costs of treatment, long waiting queues, lack of insurance and lack of access to health care in the origin country, travel long distances to benefit from health care services of destination country. Given the competitive nature of this industry, most countries are designing practical and legal services and planning for their development. For this purpose, this study has been conducted to develop a strategic planning framework for development of medical tourism industry in Yazd province of Iran; because in recent years Yazd has recognized as the health pole by patients in developing countries. In sum, emphasizing on servicing, enhancing and developing specialized treatment centers, has attracted patients from center, south and east of the country as well as Middle East and Central Asia countries. The dominant approach in this study is developmental – practical and also the research method is descriptive, analytical and survey. In order to analyzing the data, the SWOT model and best-worst techniques have been used. In the following, after identifying strategic position of Yazd province in terms of medical tourism industry, the related strategies were formulated and practical results were presented.

Cosmic ray: Studying the origin

International Nuclear Information System (INIS)

Szabelski, J.

1997-01-01

Investigations of the origin of cosmic rays are presented. Different methods are discussed: studies of cosmic gamma rays of energy from 30 MeV to about 10 15 eV (since photons point to their places of origin), studies of the mass composition of cosmic rays (because it reflects source morphology), and studies of cosmic rays with energy above 1O 19 eV (for these are the highest energies observed in nature). (author)

How to write an original article.

Science.gov (United States)

Mateu Arrom, L; Huguet, J; Errando, C; Breda, A; Palou, J

2018-05-17

A correctly drafted original article gives information on what was done, why it was done, how it was done, the result of what was done, and the significance of what was done. Many articles fail to report their results effectively. To describe the characteristics of an original article and to give practical recommendations to prevent the most common errors in our environment. We performed a systematic search of the terms "how to write a scientific article", "structure of the original article" and "publishing an article" in the databases PubMed and SCOPUS. We analysed the structure of an original article and the characteristics of its parts and prepared advice on the publication of an article. The journal's guidelines for authors should be read. It is usual for the original article to follow the IMRAD structure: Introduction, Methods, Results and Discussion. The introduction states briefly why the study was performed. The methods' section should give a detailed explanation of how the study was performed. The results should be clearly presented, with the help of tables, without repeating information. The discussion explains the relevance of the results and contrasts them with those of other authors. Any limitations and a conclusion supported by the results must be included. Writing an original article correctly requires practice and it must be supported by a good research work in order to be published. Copyright © 2018 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

Origin of pluripotent germ cell tumours: the role of microenvironment during embryonic development

DEFF Research Database (Denmark)

Kristensen, David Møbjerg; Sonne, Si Brask; Ottesen, Anne Marie

2008-01-01

into virtually any type of tissue and form teratomas (non-seminomas). CIS cells display a close phenotypic similarity to fetal germ cells (primordial germ cells or gonocytes) suggesting an origin due to a developmental delay or arrest of differentiation of early germ cells. The pluripotency of these neoplasms...... in several tissue specific stem cells, such as TFAP2C (AP-2gamma) or KIT. CIS and seminomas highly express a number of pre-meiotic germ cell specific genes, which are down-regulated during development to non-seminomas, while the expression of other embryonic markers, such as SOX2, is up...

THE DEVELOPMENT OF THE ELECTRIC POWER INDUSTRY AFTER THE OCTOBER REVOLUTION OF 1917: ORIGINS, PROSPECTS AND PROBLEMS

Directory of Open Access Journals (Sweden)

A. A. Gibadullin

2018-01-01

Full Text Available Purpose of the study. During the period of the fall of technical and technological stability of the Russian electric power industry, the issues related to the study of the historical experience of the origin, construction and development of such large industrial complexes are actualized. The present study aims to analyze the history of the development of the Russian electric power industry after the October Revolution of 1917, to reveal the influence of the revolution on the electric power industry, to investigate the postwar period of the formation of the Unified Energy System and to assess the current state of the electric power industry in the absence of large-scale projects and programs for updating and modernizing production facilities, propose mechanisms to improve technical and technological stability of electricity of the Russian Federation.Materials and methods. In 1920, after the October Revolution of 1917, the first plan related to the development of economic activities of the national economy was adopted, which was called the State Plan for the Electrification of Russia. This document contained the main mechanisms and requirements for the formation and establishment of a new branch for the economy. Based on the use of data from the Government of the Russian Federation, Federal State Statistics Service of the Russian Federation, the Ministry of Energy of the Russian Federation, Joint-stock company “United Energy System of Russia”, as well as electric power companies, the post-revolutionary period of the electric power industry development, the current state and the existing potential of the Russian electric power industry are analyzed. Using the economic-statistical, comparative and logical methods, the main results of the study were presented.Results. Analyzed indices of the electric power industry in the period 1920–1935 indicate a breakthrough in the development of the Russian energy sector, this period was marked by the

An efficient study design to test parent-of-origin effects in family trios.

Science.gov (United States)

Yu, Xiaobo; Chen, Gao; Feng, Rui

2017-11-01

Increasing evidence has shown that genes may cause prenatal, neonatal, and pediatric diseases depending on their parental origins. Statistical models that incorporate parent-of-origin effects (POEs) can improve the power of detecting disease-associated genes and help explain the missing heritability of diseases. In many studies, children have been sequenced for genome-wide association testing. But it may become unaffordable to sequence their parents and evaluate POEs. Motivated by the reality, we proposed a budget-friendly study design of sequencing children and only genotyping their parents through single nucleotide polymorphism array. We developed a powerful likelihood-based method, which takes into account both sequence reads and linkage disequilibrium to infer the parental origins of children's alleles and estimate their POEs on the outcome. We evaluated the performance of our proposed method and compared it with an existing method using only genotypes, through extensive simulations. Our method showed higher power than the genotype-based method. When either the mean read depth or the pair-end length was reasonably large, our method achieved ideal power. When single parents' genotypes were unavailable or parental genotypes at the testing locus were not typed, both methods lost power compared with when complete data were available; but the power loss from our method was smaller than the genotype-based method. We also extended our method to accommodate mixed genotype, low-, and high-coverage sequence data from children and their parents. At presence of sequence errors, low-coverage parental sequence data may lead to lower power than parental genotype data. © 2017 WILEY PERIODICALS, INC.

Development of Methods of Innovative Projects’ Management in Developer Organizations

Directory of Open Access Journals (Sweden)

Papelniuk Oksana

2017-01-01

Full Text Available In article the author studies the conceptual scheme of life cycle of innovative developer project and offers methods of innovative projects' management according to the stages of its lifecycle. The author describes algorithm of the organization of management system of innovative projects in the developer organization representing set of stages and methods. The offered algorithm allows developer organizations achieve one of the main of their objectives, which is the creation of a special environment of comfortable accommodation with the emphasis on ecological compatibility and energy efficiency.

Face recognition based on symmetrical virtual image and original training image

Science.gov (United States)

Ke, Jingcheng; Peng, Yali; Liu, Shigang; Li, Jun; Pei, Zhao

2018-02-01

In face representation-based classification methods, we are able to obtain high recognition rate if a face has enough available training samples. However, in practical applications, we only have limited training samples to use. In order to obtain enough training samples, many methods simultaneously use the original training samples and corresponding virtual samples to strengthen the ability of representing the test sample. One is directly using the original training samples and corresponding mirror samples to recognize the test sample. However, when the test sample is nearly symmetrical while the original training samples are not, the integration of the original training and mirror samples might not well represent the test samples. To tackle the above-mentioned problem, in this paper, we propose a novel method to obtain a kind of virtual samples which are generated by averaging the original training samples and corresponding mirror samples. Then, the original training samples and the virtual samples are integrated to recognize the test sample. Experimental results on five face databases show that the proposed method is able to partly overcome the challenges of the various poses, facial expressions and illuminations of original face image.

A hybrid body technique: does the pulse diagnostic cun guan chi method have Chinese-Tibetan origins?

Science.gov (United States)

Hsu, Elisabeth

2008-01-01

This article investigates the medieval origins of the main pulse diagnostic method in contemporary Chinese medicine, sometimes known as san bu (three sectors) method, which requires physicians to examine the mai (vessels, vessel movements or pulse) on the wrist at the three locations cun guan chi (inch, gate, foot). The article provides evidence to suggest that this body technique grew out of an earlier Chinese one, the cun chi (inch-foot) method, which appears to have aimed at investigating the qualities of yin and yang in order to determine the condition of a patient by means of exploring fairly large areas of the patient's body surface with the palms. The article furthermore posits that the cun chi method was decisively transformed in medieval times, presumably due to the impact of early Tibetan pulse diagnostic practices: it became framed in a numerology of three and started advocating the use of the fingertips for sensing the pulse beats. The article, which draws on detailed textual analyses of medieval manuscripts, on visual evidence and also on psychophysical research, furthermore highlights how misunderstandings can constructively contribute to cultural communication.

Developments in Surrogating Methods

Directory of Open Access Journals (Sweden)

Hans van Dormolen

2005-11-01

Full Text Available In this paper, I would like to talk about the developments in surrogating methods for preservation. My main focus will be on the technical aspects of preservation surrogates. This means that I will tell you something about my job as Quality Manager Microfilming for the Netherlands’ national preservation program, Metamorfoze, which is coordinated by the National Library. I am responsible for the quality of the preservation microfilms, which are produced for Metamorfoze. Firstly, I will elaborate on developments in preservation methods in relation to the following subjects: · Preservation microfilms · Scanning of preservation microfilms · Preservation scanning · Computer Output Microfilm. In the closing paragraphs of this paper, I would like to tell you something about the methylene blue test. This is an important test for long-term storage of preservation microfilms. Also, I will give you a brief report on the Cellulose Acetate Microfilm Conference that was held in the British Library in London, May 2005.

A Survey of Formal Methods in Software Development

DEFF Research Database (Denmark)

Bjørner, Dines

2012-01-01

The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

Cosmic ray: Studying the origin

Energy Technology Data Exchange (ETDEWEB)

Szabelski, J. [Cosmic Ray Laboratory, Soltan Institute for Nuclear Studies, Lodz (Poland)

1997-12-31

Investigations of the origin of cosmic rays are presented. Different methods are discussed: studies of cosmic gamma rays of energy from 30 MeV to about 10{sup 15} eV (since photons point to their places of origin), studies of the mass composition of cosmic rays (because it reflects source morphology), and studies of cosmic rays with energy above 1O{sup 19} eV (for these are the highest energies observed in nature). (author) 101 refs, 19 figs, 7 tabs

Mapping yeast origins of replication via single-stranded DNA detection.

Science.gov (United States)

Feng, Wenyi; Raghuraman, M K; Brewer, Bonita J

2007-02-01

Studies in th Saccharomyces cerevisiae have provided a framework for understanding how eukaryotic cells replicate their chromosomal DNA to ensure faithful transmission of genetic information to their daughter cells. In particular, S. cerevisiae is the first eukaryote to have its origins of replication mapped on a genomic scale, by three independent groups using three different microarray-based approaches. Here we describe a new technique of origin mapping via detection of single-stranded DNA in yeast. This method not only identified the majority of previously discovered origins, but also detected new ones. We have also shown that this technique can identify origins in Schizosaccharomyces pombe, illustrating the utility of this method for origin mapping in other eukaryotes.

Development of an extraction method for perchlorate in soils.

Science.gov (United States)

Cañas, Jaclyn E; Patel, Rashila; Tian, Kang; Anderson, Todd A

2006-03-01

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.

Taxonomic Dimensions for Studying Situational Method Development

NARCIS (Netherlands)

Aydin, Mehmet N.; Harmsen, Frank; van Hillegersberg, Jos; Ralyté, Jolita; Brinkkemper, Sjaak; Henderson-Sellers, Brian

2007-01-01

This paper is concerned with fragmented literature on situational method development, which is one of fundamental topics related to information systems development (ISD) methods. As the topic has attracted many scholars from various and possibly complementary schools of thought, different

Development and evaluation of a novel lossless image compression method (AIC: artificial intelligence compression method) using neural networks as artificial intelligence

International Nuclear Information System (INIS)

Fukatsu, Hiroshi; Naganawa, Shinji; Yumura, Shinnichiro

2008-01-01

This study was aimed to validate the performance of a novel image compression method using a neural network to achieve a lossless compression. The encoding consists of the following blocks: a prediction block; a residual data calculation block; a transformation and quantization block; an organization and modification block; and an entropy encoding block. The predicted image is divided into four macro-blocks using the original image for teaching; and then redivided into sixteen sub-blocks. The predicted image is compared to the original image to create the residual image. The spatial and frequency data of the residual image are compared and transformed. Chest radiography, computed tomography (CT), magnetic resonance imaging, positron emission tomography, radioisotope mammography, ultrasonography, and digital subtraction angiography images were compressed using the AIC lossless compression method; and the compression rates were calculated. The compression rates were around 15:1 for chest radiography and mammography, 12:1 for CT, and around 6:1 for other images. This method thus enables greater lossless compression than the conventional methods. This novel method should improve the efficiency of handling of the increasing volume of medical imaging data. (author)

Authentic, Original, and Valuable

DEFF Research Database (Denmark)

Tupasela, Aaro Mikael; Tamminen, Sakari

2015-01-01

The idea of genetic authenticity and origin has been an important issue within genetics for decades for scientific, political, and economic reasons. The question of where species and populations come from, as well as the linking of genetic traits to particular geographical locations, has resurfaced....... Using the case of human and non-human genetics to compare and contrast the various facets associated with genetic identity, we seek to develop a broader picture of the ways in which genetics plays an important role in stabilizing categories of origin....

Development of a Method to Isolate Glutamic Acid from Foodstuffs for a Precise Determination of Their Stable Carbon Isotope Ratio.

Science.gov (United States)

Kobayashi, Kazuhiro; Tanaka, Masaharu; Yatsukawa, Yoichi; Tanabe, Soichi; Tanaka, Mitsuru; Ohkouchi, Naohiko

2018-01-01

Recent growing health awareness is leading to increasingly conscious decisions by consumers regarding the production and traceability of food. Stable isotopic compositions provide useful information for tracing the origin of foodstuffs and processes of food production. Plants exhibit different ratios of stable carbon isotopes (δ 13 C) because they utilized different photosynthetic (carbon fixation) pathways and grow in various environments. The origins of glutamic acid in foodstuffs can be differentiated on the basis of these photosynthetic characteristics. Here, we have developed a method to isolate glutamic acid in foodstuffs for determining the δ 13 C value by elemental analyzer-isotope-ratio mass spectrometry (EA/IRMS) without unintended isotopic fractionation. Briefly, following acid-hydrolysis, samples were defatted and passed through activated carbon and a cation-exchange column. Then, glutamic acid was isolated using preparative HPLC. This method is applicable to measuring, with a low standard deviation, the δ 13 C values of glutamic acid from foodstuffs derived from C3 and C4 plants and marine algae.

The Development of Global and Domain Self-Esteem from Ages 10 to 16 for Mexican-Origin Youth

Science.gov (United States)

Harris, Michelle A.; Wetzel, Eunike; Robins, Richard W.; Donnellan, M. Brent; Trzesniewski, Kali H.

2018-01-01

The current study investigated the development of global and domain (academic, physical, same-sex peer relationship, opposite-sex peer relationship) self-esteem from age 10 to 16 in a sample of Mexican-origin adolescents. Participants' (N = 674) responses on the Self-Description Questionnaire (SDQ; Marsh, 2005) II-S showed moderate rank-order…

Fungi identify the geographic origin of dust samples.

Directory of Open Access Journals (Sweden)

Neal S Grantham

Full Text Available There is a long history of archaeologists and forensic scientists using pollen found in a dust sample to identify its geographic origin or history. Such palynological approaches have important limitations as they require time-consuming identification of pollen grains, a priori knowledge of plant species distributions, and a sufficient diversity of pollen types to permit spatial or temporal identification. We demonstrate an alternative approach based on DNA sequencing analyses of the fungal diversity found in dust samples. Using nearly 1,000 dust samples collected from across the continental U.S., our analyses identify up to 40,000 fungal taxa from these samples, many of which exhibit a high degree of geographic endemism. We develop a statistical learning algorithm via discriminant analysis that exploits this geographic endemicity in the fungal diversity to correctly identify samples to within a few hundred kilometers of their geographic origin with high probability. In addition, our statistical approach provides a measure of certainty for each prediction, in contrast with current palynology methods that are almost always based on expert opinion and devoid of statistical inference. Fungal taxa found in dust samples can therefore be used to identify the origin of that dust and, more importantly, we can quantify our degree of certainty that a sample originated in a particular place. This work opens up a new approach to forensic biology that could be used by scientists to identify the origin of dust or soil samples found on objects, clothing, or archaeological artifacts.

Country-of-origin effect and consumer brand perception

DEFF Research Database (Denmark)

Iacob, Andreea

This dissertation investigates the impact of country of origin on the brand perception of consumers from developed and emerging countries. Particularly, the aim is to explore the impact of the country of origin on the Western consumers’ brand perception of high involvement products with multiple...... countries of origin and the Central Eastern European consumers’ brand perception of low involvement products from developed countries. It comprises a summary report, consisting of an introduction, a methodology chapter, a conclusions chapter and four research papers....

Analytical methods used for the authentication of food of animal origin.

Science.gov (United States)

Abbas, Ouissam; Zadravec, Manuela; Baeten, Vincent; Mikuš, Tomislav; Lešić, Tina; Vulić, Ana; Prpić, Jelena; Jemeršić, Lorena; Pleadin, Jelka

2018-04-25

Since adulteration can have serious consequences on human health, it affects market growth by destroying consumer confidence. Therefore, authentication of food is important for food processors, retailers and consumers, but also for regulatory authorities. However, a complex nature of food and an increase in types of adulterants make their detection difficult, so that food authentication often poses a challenge. This review focuses on analytical approaches to authentication of food of animal origin, with an emphasis put on determination of specific ingredients, geographical origin and adulteration by virtue of substitution. This review highlights a current overview of the application of target approaches in cases when the compound of interest is known and non-target approaches for screening issues. Papers cited herein mainly concern milk, cheese, meat and honey. Moreover, advantages, disadvantages as well as challenges regarding the use of both approaches in official food control but also in food industry are investigated. Copyright © 2017 Elsevier Ltd. All rights reserved.

The SIESTA method; developments and applicability

International Nuclear Information System (INIS)

Artacho, Emilio; Anglada, E; Dieguez, O; Gale, J D; Garcia, A; Junquera, J; Martin, R M; Ordejon, P; Pruneda, J M; Sanchez-Portal, D; Soler, J M

2008-01-01

Recent developments in and around the SIESTA method of first-principles simulation of condensed matter are described and reviewed, with emphasis on (i) the applicability of the method for large and varied systems (ii) efficient basis sets for the standards of accuracy of density-functional methods (iii) new implementations, and (iv) extensions beyond ground-state calculations

Development and applications of k0 based NAA and prompt gamma-ray NAA methods at BARC

International Nuclear Information System (INIS)

Acharya, R.; Nair, A.G.C.; Sudarshan, K.; Goswami, A.; Reddy, A.V.R.

2008-01-01

A summary of k 0 -based R and D work on neutron activation analysis (NAA), internal mono standard NAA (IM-NAA) and prompt gamma-ray NAA (PGNAA) is presented. The k 0 -based NAA was standardized by characterizing irradiation sites of research reactors, validated using reference materials and applied to samples of different origin. Recently IM-NAA method was developed, validated for small and large size samples and applied for the analysis of large size as well as non-standard geometry samples. Studies on PGNAA included characterization of neutron beam, determinations of detection efficiency and prompt k 0 -factors, and analytical applications. (author)

Arenediazonium salts transformations in water media: Coming round to origins

OpenAIRE

Marina E. Trusova; Ksenia V. Kutonova; Victor V. Kurtukov; Victor D. Filimonov; Pavel S. Postnikov

2016-01-01

Aromatic diazonium salts belong to an important class of organic compounds. The chemistry of these compounds has been originally developed in aqueous media, but then chemists focused on new synthetic methods that utilize reactions of diazonium salts in organic solvents. However, according to the principles of green chemistry and resource-efficient technologies, the use of organic solvents should be avoided. This review summarizes new trends of diazonium chemistry in aqueous media that satisfy...

Limitations of urban development in land of social origin: the case of the metropolitan area of the city of Toluca (ZMCT

Directory of Open Access Journals (Sweden)

Jiménez-Sánchez Pedro Leobardo

2016-06-01

Full Text Available The paper analyses the occupation process of agricultural land with social origin and urban uses in the metropolitan area of the city of Toluca (ZMCT, and the barriers that the population and authorities have to face in order to regularize the settlements. A mixed research method was applied, which included the use of quantitative and qualitative methods, on the basis of a theoretical analysis, to build a methodological research model, which was applied to an empirical case in municipal and metropolitan areas. The analysis of the 14 municipalities that constitute ZMCT shows that the barriers for regularizing settlements in land of social origin are the result of legal/administrative inefficiencies due to the incapability of local city halls to address the collective needs of society.

Originals and reproductions: information society challenges

Directory of Open Access Journals (Sweden)

Vilenka Jakac-Bizjak

2001-01-01

Full Text Available Due to digitisation of traditional documents new collections of electronic publications/resources are formed. The article deals with the process of planning of digitisation of library materials on traditional media, accompanying decisions and procedures, as well as methods of storage and preservation of digitised materials, the impact of target public on the decision about what to digitise and the questions of copyright. Acquisition and preservation of new media has an important influence on the work of libraries, especially on collection development. Parallel to these changes new technical terms develop, as for example information resources management.In the introduction, the author actualise the thought of Walter Benjamin on the impact of reproduction techniques on the status of original documents and on the separation of tradition from what was reproduced. The question whether digitisation changes the principles of national libraries underlying the preservation of national cultural heritage is raised.

Removal of organic compounds from wastewater originating from the production of printed circuit boards by UV-Fenton method

Directory of Open Access Journals (Sweden)

Thomas Maciej

2017-12-01

Full Text Available The possibility of removing organic compounds from wastewater originating from the photochemical production of printed circuit boards by use of waste acidification and disposal of precipitated photopolymer in the first stage and the UV-Fenton method in a second stage has been presented. To optimize the process of advanced oxidation, the RSM (Response Surface Methodology for three independent factors was applied, i.e. pH, the concentration of Fe(II and H2O2 concentration. The use of optimized values of individual parameters in the process of wastewater treatment caused a decrease in the concentration of the organic compounds denoted as COD by approx. 87% in the first stage and approx. 98% after application of both processes. Precipitation and the decomposition of organic compounds was associated with a decrease of wastewater COD to below 100 mg O2/L whereas the initial value was 5550 mg O2/L. Decomposition of organic compounds and verification of the developed model of photopolymers removal was also carried out with use of alternative H2O2 sources i.e. CaO2, MgO2, and Na2CO3·1,5H2O2.

Approach on origin management of nuclear materials at KAERI

International Nuclear Information System (INIS)

Kim, Hyun-Jo; Lee, Sung-Ho; Lee, Byung-Doo; Kim, In-Chul; Kim, Hyun-Sook; Jung, Juang

2017-01-01

This paper describes the current origin management approach and reviews the requirement to be reflected to meet the bilateral agreements. KAERI developed the origin management system to efficiently and effectively manage the origin information. The system is connected with KASIS to share the information on the inventory changes of nuclear material. After development of the system, however, the new concept of obligated nuclear material is introduced according to the amended ROK-US agreement. Also, the origin management system based on IAEA accounting reports needs to revise to include the nuclear material exempted from safeguards. Therefore KAERI will improve the origin management system to meet the requirement of bilateral agreements and NSSC notice to be revised.

Development of a novel and simple method to evaluate disintegration of rapidly disintegrating tablets.

Science.gov (United States)

Hoashi, Yohei; Tozuka, Yuichi; Takeuchi, Hirofumi

2013-01-01

The purpose of this study was to develop and test a novel and simple method for evaluating the disintegration time of rapidly disintegrating tablets (RDTs) in vitro, since the conventional disintegration test described in the pharmacopoeia produces poor results due to the difference of its environmental conditions from those of an actual oral cavity. Six RDTs prepared in our laboratory and 5 types of commercial RDTs were used as model formulations. Using our original apparatus, a good correlation was observed between in vivo and in vitro disintegration times by adjusting the height from which the solution was dropped to 8 cm and the weight of the load to 10 or 20 g. Properties of RDTs, such as the pattern of their disintegrating process, can be assessed by verifying the load. These findings confirmed that our proposed method for an in vitro disintegration test apparatus is an excellent one for estimating disintegration time and the disintegration profile of RDTs.

Oral and visual presentation and production of original responses.

Science.gov (United States)

Johnson, R A; Khatena, J

1975-08-01

Verbal originality scores were obtained from Onomatopoeia and Images, Form 1B, given to 106 Ss aged 10 to 12 yr. and 94 Ss aged 16 to 19 yr. The older Ss scored significantly higher than the younger Ss with significant main effects for age, but not for method of word presentation. A significant interaction was found between word presentation method and age. Older Ss were more original with the oral presentation while the younger Ss performed approximately the same with both methods.

[Necrotizing cervico-facial cellulitis of dental origin in a developing country].

Science.gov (United States)

Togo, S; Ouattara, M A; Saye, J; Sangaré, I; Touré, M; Maiga, I; Dakouo, D J; Xing, L; Guo, L; Zhou, A J; Koumaré, S; Koita, A K; Sanogo, Z Z; Yéna, S

2017-09-01

Necrotizing cellulitis of dental origin is a serious disease and requires prompt and effective management to avoid adverse outcomes. The purpose of this work is to describe the diagnostic and therapeutic difficulties encountered in this condition. This was a prospective study in the thoracic surgery department of Mali Hospital from January 2011 to February 2015. We collected consecutively 19 cases of complicating cervico-facial cellulitis of dental origin. The anatomical and clinical aspects, therapeutic modalities and difficulties are described. Dental pain and fever were the predominant symptoms followed by cervical edema. Chest CT-scan was the basis for the diagnosis in all cases. Cervicotomy with debridement was the most performed surgical procedure. Pleural drainage was performed in 6 cases. Three patients (15.8%) died. Necrotizing cellulitis of dental origin is a serious disease with high morbidity and mortality. The key radiological examination is the thoracic CT-scan. Early medico-surgical management by emergency care, tailored antibiotic therapy, removal of necrotizing tissues and drainage of collections are required to deliver a good outcome. Copyright © 2016 SPLF. Published by Elsevier Masson SAS. All rights reserved.

Origins, Phytochemistry, Pharmacology, Analytical Methods and Safety of Cortex Moutan (Paeonia suffruticosa Andrew: A Systematic Review

Directory of Open Access Journals (Sweden)

Zhiqiang Wang

2017-06-01

Full Text Available Cortex Moutan (CM, a well-known traditional Chinese medicine, is commonly used for treating various diseases in China and other eastern Asian countries. Recorded in Pharmacopeias of several countries, CM is now drawing increasing attention and under extensive studies in various fields. Phytochemical studies indicate that CM contains many valuable secondary metabolites, such as monoterpene glycosides and phenols. Ample evidence from pharmacological researches suggest that CM has a wide spectrum of activities, such as anti-inflammatory, anti-oxidant, anti-tumor, anti-diabetic, cardiovascular protective, neuroprotective, hepatoprotective effects. Moreover, various analytical methods were established for the quality evaluation and safety control of CM. This review synopsizes updated information concerning the origins, phytochemistry, pharmacology, analytical method and safety of CM, aiming to provide favorable references for modern CM research and application. In conclusion, continuing pharmacological investigations concerning CM should be conducted to unravel its pharmacological mechanisms. Further researches are necessary to obtain comprehensive and applicable analytical approach for quality evaluation and establish harmonized criteria of CM.

The J-Matrix Method Developments and Applications

CERN Document Server

Alhaidari, Abdulaziz D; Heller, Eric J; Abdelmonem, Mohamed S

2008-01-01

This volume aims to provide the fundamental knowledge to appreciate the advantages of the J-matrix method and to encourage its use and further development. The J-matrix method is an algebraic method of quantum scattering with substantial success in atomic and nuclear physics. The accuracy and convergence property of the method compares favourably with other successful scattering calculation methods. Despite its thirty-year long history new applications are being found for the J-matrix method. This book gives a brief account of the recent developments and some selected applications of the method in atomic and nuclear physics. New findings are reported in which experimental results are compared to theoretical calculations. Modifications, improvements and extensions of the method are discussed using the language of the J-matrix. The volume starts with a Foreword by the two co-founders of the method, E.J. Heller and H.A. Yamani and it contains contributions from 24 prominent international researchers.

Biological Methods and Manual Development

Science.gov (United States)

EPA scientists conduct research to develop and evaluate analytical methods for the identification, enumeration, evaluation of aquatic organisms exposed to environmental stressors and to correlate exposures with effects on chemical and biological indicators

Origins Space Telescope

Science.gov (United States)

Cooray, Asantha; Origins Space Telescope Study Team

2018-01-01

The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. This presentation will provide a summary of the OST STDT, our completed first mission concept and an introduction to the second concept that will be studied at the study center in 2018. This presentation will also summarize key science drivers and the key study milestones between 2018 and 2020.

Characteristics and development of European cyclones with tropical origin in reanalysis data

Science.gov (United States)

Dekker, Mark M.; Haarsma, Reindert J.; Vries, Hylke de; Baatsen, Michiel; Delden, Aarnout J. van

2018-01-01

Major storm systems over Europe frequently have a tropical origin. This paper analyses the characteristics and dynamics of such cyclones in the observational record, using MERRA reanalysis data for the period 1979-2013. By stratifying the cyclones along three key phases of their development (tropical phase, extratropical transition and final re-intensification), we identify four radically different life cycles: the tropical cyclone and extratropical cyclone life cycles, the classic extratropical transition and the warm seclusion life cycle. More than 50% of the storms reaching Europe from low latitudes follow the warm seclusion life cycle. It also contains the strongest cyclones. They are characterized by a warm core and a frontal T-bone structure, with a northwestward warm conveyor belt and the effects of dry intrusion. Rapid deepening occurs in the latest phase, around their arrival in Europe. Both baroclinic instability and release of latent heat contribute to the strong intensification. The pressure minimum occurs often a day after entering Europe, which enhances the potential threat of warm seclusion storms for Europe. The impact of a future warmer climate on the development of these storms is discussed.

Prenatal development supports a single origin of laryngeal echolocation in bats.

Science.gov (United States)

Wang, Zhe; Zhu, Tengteng; Xue, Huiling; Fang, Na; Zhang, Junpeng; Zhang, Libiao; Pang, Jian; Teeling, Emma C; Zhang, Shuyi

2017-01-09

Bat laryngeal echolocation is considered as one of the most complex and diverse modes of auditory sensory perception in animals and its evolutionary history has been the cause of many scientific controversies in the past two decades. To date, the majority of scientific evidence supports that bats (Chiroptera) are divided into two subordinal groups: Yinpterochiroptera, containing the laryngeal echolocating superfamily Rhinolophidae as sister taxa to the non-laryngeal echolocating family Pteropodidae; and Yangochiroptera, containing all other laryngeal echolocating lineages. This topology has led to an unanswered question in mammalian biology: was laryngeal echolocation lost in the ancestral pteropodids or gained convergently in the echolocating bat lineages? To date, there is insufficient and conflicting evidence from fossil, genomic, morphological and phylogenomic data to resolve this question. We detail an ontogenetic study of fetal cochlear development from seven species of bats and five outgroup mammals and show that in early fetal development, all bats including the non-laryngeal echolocating pteropodids have a similarly large cochlea typically associated with laryngeal echolocation abilities. The subsequent cochlear growth rate in the pteropodids is the slowest of all mammals and leads to the pteropodids and the non-echolocating lineages eventually sharing a similar cochlear morphospace as adults. The results suggest that pteropodids maintain a vestigial developmental stage indicative of past echolocation capabilities and thus support a single origin of laryngeal echolocation in bats.

DDOT MXD+ method development report.

Science.gov (United States)

2015-09-01

Mixed-use development has become increasingly common across the country, including Washington, D.C. : However, a straightforward and empirically validated method for evaluating the traffic impacts of such : projects is still needed. The data presente...

DNA fingerprinting of pearls to determine their origins.

Directory of Open Access Journals (Sweden)

Joana B Meyer

Full Text Available We report the first successful extraction of oyster DNA from a pearl and use it to identify the source oyster species for the three major pearl-producing oyster species Pinctada margaritifera, P. maxima and P. radiata. Both mitochondrial and nuclear gene fragments could be PCR-amplified and sequenced. A polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP assay in the internal transcribed spacer (ITS region was developed and used to identify 18 pearls of unknown origin. A micro-drilling technique was developed to obtain small amounts of DNA while maintaining the commercial value of the pearls. This DNA fingerprinting method could be used to document the source of historic pearls and will provide more transparency for traders and consumers within the pearl industry.

Multiresidue method for pesticide residue analysis in food of animal and plant origin based on GC or LC and MS or MS/MS.

Science.gov (United States)

Muñoz, Eva; Muñoz, Gloria; Pineda, Laura; Serrahima, Eulalia; Centrich, Francesc

2012-01-01

A multiresidue method based on GC or LC and MS or MS/MS for the determination of 204 pesticides in diverse food matrixes of animal and plant origin is described. The method can include different stages of cleanup according to the chemical characteristics of each sample. Samples were extracted using accelerated solvent extraction. Those with a high fat content or that contained chlorophyll required further purification by gel permeation chromatography and/or SPE (ENVI-Carb). The methodology developed here was fully validated; the LOQs for the 204 pesticides are presented. The LOQ values lie between 0.01 to 0.02 mg/kg. However, in some cases, mainly in baby food, they were as low as 0.003 mg/kg, thereby meeting European Union requirements on maximum residue levels for pesticides, as outlined in European regulation 396/2005 and the Commission Directive 2003/13/EC. The procedure has been accredited for a wide scope of pesticides and matrixes by the Spanish Accreditation Body (ENAC) following ISO/IEC 17025:2005, as outlined in ENAC technical note NT-19.

Experimental methods for the Palaeolithic dry distillation of birch bark: implications for the origin and development of Neandertal adhesive technology.

Science.gov (United States)

Kozowyk, P R B; Soressi, M; Pomstra, D; Langejans, G H J

2017-08-31

The destructive distillation of birch bark to produce tar has recently featured in debates about the technological and cognitive abilities of Neandertals and modern humans. The abilities to precisely control fire temperatures and to manipulate adhesive properties are believed to require advanced mental traits. However, the significance given to adhesive technology in these debates has quickly outgrown our understanding of birch bark tar and its manufacture using aceramic techniques. In this paper, we detail three experimental methods of Palaeolithic tar production ranging from simple to complex. We recorded the fuel, time, materials, temperatures, and tar yield for each method and compared them with the tar known from the Palaeolithic. Our results indicate that it is possible to obtain useful amounts of tar by combining materials and technology already in use by Neandertals. A ceramic container is not required, and temperature control need not be as precise as previously thought. However, Neandertals must have been able to recognize certain material properties, such as adhesive tack and viscosity. In this way, they could develop the technology from producing small traces of tar on partially burned bark to techniques capable of manufacturing quantities of tar equal to those found in the Middle Palaeolithic archaeological record.

Development of detection methods for irradiated foods - Detection method for radiolytic products of irradiated foods

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyong Su; Kim, Sun Min; Park, Eun Ryong; Lee, Hae Jung; Kim, Eun Ah; Jo, Jung Ok [Chosun University, Kwangju (Korea)

1999-04-01

Meat (beef, pork, chicken) and nut (sesame, perilla, black sesame, peanut) were irradiated with /sup 60/Co gamma-ray. A process to detect radiation-induced hydrocarbons and 2-alkylcyclobutanones includes the extraction of fat from meat and nut, separation of hydrocarbons and 2-alkylcyclobutanones with a florisil column and identification of GC/MS methods. Concentrations of the produced hydrocarbons and 2-alkylcyclobutanones tended to increase linearly with the dose levels of irradiation in beef, pork and chicken, while concentrations of radiation-induced hydrocarbons were different individually at the same dose level. In meat, hydrocarbons and 2-alkylcyclobutanones originated from oleic acid were found in a large amount. The concentrations of radiation-induced hydrocarbons were relatively constant during 16 weeks. In nut, hydrocarbons originated from oleic acid and linoleic acid were the major compounds whereas results of perilla was similar to meat. Radiation-induced hydrocarbons were increased linearly with the irradiation dose and remarkably detected at 0.5 kGy and over. 44 refs., 30 figs., 14 tabs. (Author)

Origin and early development of the chicken adenohypophysis.

Directory of Open Access Journals (Sweden)

Luisa eSanchez-Arrones

2015-02-01

Full Text Available The adenohypophysis (ADH is an important endocrine organ involved in the regulation of many physiological processes. The late morphogenesis of this organ at neural tube stages is well known: the epithelial ADH primordium is recognized as an invagination of the stomodeal roof (Rathke’s pouch, whose walls later thicken and differentiate as the primordium becomes pediculated, and then fully separated from the stomodeum. The primordium attaches to the pial surface of the basal hypothalamus, next to the neurohypophyseal field (NH; future posterior pituitary, from which it was previously separated by migrating prechordal plate cells. Once the NH evaginates, the ADH surrounds it and jointly forms with it the pituitary gland. In contrast, little is known about the precise origin of the ADH precursors at neural plate stages and how the primordium reaches the stomodeum. For that reason, we produced in the chicken a specific ADH fate map at early neural plate stages, which was amplified with gene markers. By means of experiments labelling the mapped presumptive ADH, we were able to follow the initial anlage into its transformation into Rathke’s pouch. The ADH origin was corroborated to be strictly extraneural, i.e., to lie at stage HH4/5 outside of the anterior neural plate within the pre-placodal field. The ADH primordium is fully segregated from the anterior neural border cells and the neighboring olfactory placodes both in terms of precursor cells and molecular profile from head fold stages onwards. The placode becomes visible as a molecularly characteristic ectodermal thickening from stage HH10 onwards. The onset of ADH genoarchitectonic regionalization into intermediate and anterior lobes occurs at closed neural tube stages.

Ethnic Socialization in Neighborhood Contexts: Implications for Ethnic Attitude and Identity Development Among Mexican-Origin Adolescents.

Science.gov (United States)

White, Rebecca M B; Knight, George P; Jensen, Michaeline; Gonzales, Nancy A

2018-05-01

Neighborhood Latino ethnic concentration, above and beyond or in combination with mothers' and fathers' ethnic socialization, may have beneficial implications for minority adolescents' ethnic attitude and identity development. These hypotheses, along with two competing hypotheses, were tested prospectively (from x¯age = 12.79-15.83 years) in a sample of 733 Mexican-origin adolescents. Neighborhood ethnic concentration had beneficial implications for ethnic identity processes (i.e., ethnic exploration and perceived peer discrimination) but not for ethnic attitudes. For Mexico-born adolescents, high maternal ethnic socialization compensated for living in neighborhoods low on ethnic concentration. Findings are discussed vis-à-vis the ways in which they address major gaps in the neighborhood effects literature and the ethnic and racial identity development literature. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Cancers of unknown primary origin (CUP) are characterized by chromosomal instability (CIN) compared to metastasis of know origin

DEFF Research Database (Denmark)

Vikeså, Jonas; Møller, Anne Kirstine H; Kaczkowski, Bogumil

2015-01-01

BACKGROUND: Cancers of unknown primary (CUPs) constitute ~5% of all cancers. The tumors have an aggressive biological and clinical behavior. The aim of the present study has been to uncover whether CUPs exhibit distinct molecular features compared to metastases of known origin. METHODS: Employing......RNA signatures of chromosome instability (CIN), indicating that CUPs are chromosome unstable compared to metastases of known origin. CONCLUSIONS: CIN may account for the uncommon clinical presentation, chemoresistance and poor outcome in patients with CUP and warrant selective diagnostic strategies and treatment....... genome wide transcriptome analysis, Linear Discriminant Analysis (LDA) and Quadratic Discriminant Analysis (QDA), we defined the putative origins of a large series of CUP and how closely related a particular CUP was to corresponding metastases of known origin. LDA predictions were subsequently used...

Acoustic Center or Time Origin?

DEFF Research Database (Denmark)

Staffeldt, Henrik

1999-01-01

The paper discusses the acoustic center in relation to measurements of loudspeaker polar data. Also, it presents the related concept time origin and discusses the deviation that appears between positions of the acoustic center found by wavefront based and time based measuring methods....

DEVELOPMENT OF ASSESSMENT METHODS OF EFFECTIVENESS OF INNOVATIVE STAFF ACTIVITY MOTIVATIONAL MECHANISM

Directory of Open Access Journals (Sweden)

Viktoriia Honchar

2016-11-01

Full Text Available The aim of the science work is to develop methods to assess the innovative activity of the personnel that will provide motivation for employees to be active in the direction of research and introduction of internal reserves for its improvement. Methods. In the study were used: system method and methods of logical analysis – to justify theoretical and practical recommendations on the development of conceptual bases of the formation of the motivational mechanism of personnel management, economic-mathematical modelling and forecasting methods – to assess the influence of motivation factors on the level of labour activity of the personnel. Results. In the work the notion “motivation”, considering the innovative changes of the modern economy, is clarified. In order to foster innovative activity in the enterprise it is proposed to improve organizational structure by controlling the center of innovation activity management, which includes economic, technical and social division. Proposed an establishment of the project teams under the terms of accounting costs, which contributes to more active workers’ involvement in the formation of innovative development plans. The main points that determine their effectiveness are: growth of volumes of output, diminution of expenses of materials and energy resources, timeliness and relevance to the product market, improvement of the quality of work performed. A profit, derived by project teams, is recommended to distribute on: increment of the payroll, innovative development, stimulation and motivation fund. The research of the activity of the enterprises showed that one of the effective methods to stimulate staff is a motivational system based on the use of KPI. Bonuses for the implemented project, which are adjusted to the output of the basic stage, or KPI project as a whole, fixed bonuses as a percentage of the profits, and bonuses in stages of the project are the forms of motivation of project teams

Development of spectrophotometric fingerprinting method for ...

African Journals Online (AJOL)

Selective and efficient analytical methods are required not only for quality assurance but also for authentication of herbal formulations. A simple, rapid and validated fingerprint method has developed for estimation of piperine in 'Talisadi churna', a well known herbal formulation in India. The estimation was carried out in two ...

Development of a high performance liquid chromatography method ...

African Journals Online (AJOL)

Development of a high performance liquid chromatography method for simultaneous ... Purpose: To develop and validate a new low-cost high performance liquid chromatography (HPLC) method for ..... Several papers have reported the use of ...

Causes and prevention of in-stent restenosis of vertebral artery origin after stenting

International Nuclear Information System (INIS)

Zhao Huipin; Li Shenmao; Zhang Guangping

2010-01-01

Vertebral artery stenosis is an important cause of posterior circulation stroke. Vertebral artery stenosis most commonly occurs at its origin site. In recent years, balloon angioplasty and stent implantation have been widely employed in the treatment of vertebral artery origin stenosis. However, the long term outcome of stent implantation is affected by in-stent restenosis. Multiple contributory factors have been identified, but clear understanding of the overall underlying mechanism remains an enigma. With the development of pathophysiology, prevention and treatment methods of in-stent restenosis have been improved. In recent years, drug-eluting stents, radioactive stents and magnetic stents have been widely applied. To some extent, these stents and drug therapy can solve the problem of restenosis. This article aims to review the clinical application and the up-to-date research progresses in preventing and managing vertebral artery origin restenosis. (authors)

Discriminating the Geographical Origins of Chinese White Lotus Seeds by Near-Infrared Spectroscopy and Chemometrics

Directory of Open Access Journals (Sweden)

Lu Xu

2015-01-01

Full Text Available The traceability of a Chinese white lotus seed (WLS with Protected Designation of Origin (PDO was investigated using near-infrared (NIR spectroscopy and chemometrics. Three chemometrics methods, discrimination analysis (DA, class modeling, and a newly proposed strategy, the fusion of DA and class modeling, were investigated to compare their capacity to trace the geographical origins of WLS. Least squares support vector machine (LS-SVM was developed to distinguish the PDO WLS from non-PDO WLS of four main producing areas. A class modeling technique, one-class partial least squares (OCPLS, was developed only using the data of PDO WLS. By the fusion of LS-SVM and OCPLS, the best prediction sensitivity and specificity were 0.900 and 0.973, respectively. The results indicate that fusion of DA and class modeling can enhance the specificity for detection of non-PDO products. The conclusion is that DA and class modeling should be combined for tracing food geographical origins.

Evaluation of fecal indicator and pathogenic bacteria originating from swine manure applied to agricultural lands using culture-based and quantitative real-time PCR methods.

Science.gov (United States)

Fecal bacteria, including those originating from concentrated animal feeding operations, are a leading contributor to water quality impairments in agricultural areas. Rapid and reliable methods are needed that can accurately characterize fecal pollution in agricultural settings....

Some problems on Monte Carlo method development

International Nuclear Information System (INIS)

Pei Lucheng

1992-01-01

This is a short paper on some problems of Monte Carlo method development. The content consists of deep-penetration problems, unbounded estimate problems, limitation of Mdtropolis' method, dependency problem in Metropolis' method, random error interference problems and random equations, intellectualisation and vectorization problems of general software

Origin of solar system

Energy Technology Data Exchange (ETDEWEB)

Pokorny, Z.

1984-01-01

The generally accepted concept has it that the Sun and the planets originated almost simultaneously from nebula (the nebular hypothesis). It is assumed that the temperature of the nebula decreased in the direction from the centre which led to the segregation of elements and to the different chemical composition of the individual planets. The planets formed either from the gravitational collapse of part of the nebula or by gradual accretion. In the scenario of the origin of the solar system there are many blank spots, namely as concerns the initial stages of development and the period when the formation of the planets had ''almost been completed''.

Origin of solar system

International Nuclear Information System (INIS)

Pokorny, Z.

1984-01-01

The generally accepted concept has it that the Sun and the planets originated almost simultaneously from nebula (the nebular hypothesis). It is assumed that the temperature of the nebula decreased in the direction from the centre which led to the segregation of elements and to the different chemical composition of the individual planets. The planets formed either from the gravitational collapse of part of the nebula or by gradual accretion. In the scenario of the origin of the solar system there are many blank spots, namely as concerns the initial stages of development and the period when the formation of the planets had ''almost been completed''. (Ha)

Generating original ideas: The neural underpinning of originality.

Science.gov (United States)

Mayseless, Naama; Eran, Ayelet; Shamay-Tsoory, Simone G

2015-08-01

One of the key aspects of creativity is the ability to produce original ideas. Originality is defined in terms of the novelty and rarity of an idea and is measured by the infrequency of the idea compared to other ideas. In the current study we focused on divergent thinking (DT) - the ability to produce many alternate ideas - and assessed the neural pathways associated with originality. Considering that generation of original ideas involves both the ability to generate new associations and the ability to overcome automatic common responses, we hypothesized that originality would be associated with activations in regions related to associative thinking, including areas of the default mode network (DMN) such as medial prefrontal areas, as well as with areas involved in cognitive control and inhibition. Thirty participants were scanned while performing a DT task that required the generation of original uses for common objects. The results indicate that the ability to produce original ideas is mediated by activity in several regions that are part of the DMN including the medial prefrontal cortex (mPFC) and the posterior cingulate cortex (PCC). Furthermore, individuals who are more original exhibited enhanced activation in the ventral anterior cingulate cortex (vACC), which was also positively coupled with activity in the left occipital-temporal area. These results are in line with the dual model of creativity, according to which original ideas are a product of the interaction between a system that generates ideas and a control system that evaluates these ideas. Copyright © 2015 Elsevier Inc. All rights reserved.

Large Scale Leach Test Facility: Development of equipment and methods, and comparison to MCC-1 leach tests

International Nuclear Information System (INIS)

Pellarin, D.J.; Bickford, D.F.

1985-01-01

This report describes the test equipment and methods, and documents the results of the first large-scale MCC-1 experiments in the Large Scale Leach Test Facility (LSLTF). Two experiments were performed using 1-ft-long samples sectioned from the middle of canister MS-11. The leachant used in the experiments was ultrapure deionized water - an aggressive and well characterized leachant providing high sensitivity for liquid sample analyses. All the original test plan objectives have been successfully met. Equipment and procedures have been developed for large-sample-size leach testing. The statistical reliability of the method has been determined, and ''bench mark'' data developed to relate small scale leach testing to full size waste forms. The facility is unique, and provides sampling reliability and flexibility not possible in smaller laboratory scale tests. Future use of this facility should simplify and accelerate the development of leaching models and repository specific data. The factor of less than 3 for leachability, corresponding to a 200,000/1 increase in sample volume, enhances the credibility of small scale test data which precedes this work, and supports the ability of the DWPF waste form to meet repository criteria

Country of origin effect on brand perception

DEFF Research Database (Denmark)

Iacob, Andreea

2016-01-01

During the past two decades there has been a substantial amount of empirical evidence on the country of origin phenomenon. However, marketing scholars have different perspectives and views on how the country of origin effect has impacted the brand perceptions of consumers. This paper presents...... an extensive review of the literature on the COO effect and traces the conceptual development of the country-of-origin construct in order to provide scholars and practitioners with a critical appraisal of the existing research on this topic. By following the grounds of the systematic literature, this study...... seeks to establish a solid base for country-of-origin research review....

Development of radiochemical methods for the determination of radionuclides in water samples

International Nuclear Information System (INIS)

Vajda, N.; Molnar, Zs.; Bodizs, D.

2004-01-01

Depending on the composition of minerals, ores, soils and the properties of water various amounts of radionuclides of natural origin are released into different types of water i.e. surface and ground water, mineral and well water. Furthermore, man-made radionuclides can contaminate the surface waters in the form of fallout from nuclear incidents followed by migration of the deposited isotopes into water. Measurement of radionuclides in water helps prevent the consumption of radioactive water causing high radiation doses and also enables the early discovery of contamination sources. For the latter reason monitoring radioactivity in ground water in the vicinity of nuclear installations is of great importance. High sensitivity radiochemical methods have been developed/adopted for the simultaneous determination of 90 Sr-Pu nuclides, 137 Cs- 90 Sr-Pu nuclides in 50-100 L of water. Typically, procedures contain a pre-concentration step most likely by means of co-precipitation followed by a selective separation procedure preferably by means of extraction chromatography. In most cases Sr and Pu are extracted with a crown ether and an organic phosphonate compound, respectively, while Cs is concentrated using AMP. In the presence of extremely high salt content e.g. in case of 100 L of sea water the standard extraction chromatographic procedure has to be replaced by the conventional technique of Sr-Ca separation based on the different solubilities of the nitrate precipitates. Selection criteria as well as description of the procedures will be given in detail. A high sensitivity procedure has been developed for the analysis of 129 I in 100 L of ground water based on pre-concentration with AgCI and separation by extraction with CCl 4 . The following nuclear measuring techniques were applied: LSC, alpha spectrorhetry, gamma spectrometry, neutron activation (including gamma spectrometry) for 90 Sr, 239,240 Pu, 137 Cs, and 129 I, respectively. Sensitivities of the given methods

Rules of origin and development of regional production network in ...

International Development Research Centre (IDRC) Digital Library (Canada)

Simpler Rules of Origin (RoO) with product specific rules can act as a catalyst in trade even if tariff rates are not low. Sector specific restrictiveness across trade agreements are assessed, in view of potential growth of International production networks (IPN). RoO is shown to play a significant role in promoting IPN.

Development and Validation of Analytical Method for Losartan ...

African Journals Online (AJOL)

Development and Validation of Analytical Method for Losartan-Copper Complex Using UV-Vis Spectrophotometry. ... Tropical Journal of Pharmaceutical Research ... Purpose: To develop a new spectrophotometric method for the analysis of losartan potassium in pharmaceutical formulations by making its complex with ...

Near-infrared microscopic methods for the detection and quantification of processed by-products of animal origin

Science.gov (United States)

Abbas, O.; Fernández Pierna, J. A.; Dardenne, P.; Baeten, V.

2010-04-01

Since the BSE crisis, researches concern mainly the detection, identification, and quantification of meat and bone meal with an important focus on the development of new analytical methods. Microscopic based spectroscopy methods (NIR microscopy - NIRM or/and NIR hyperspectral imaging) have been proposed as complementary methods to the official method; the optical microscopy. NIR spectroscopy offers the advantage of being rapid, accurate and independent of human analyst skills. The combination of an NIR detector and a microscope or a camera allows the collection of high quality spectra for small feed particles having a size larger than 50 μm. Several studies undertaken have demonstrated the clear potential of NIR microscopic methods for the detection of animal particles in both raw and sediment fractions. Samples are sieved and only the gross fraction (superior than 250 μm) is investigated. Proposed methodologies have been developed to assure, with an acceptable level of confidence (95%), the detection of at least one animal particle when a feed sample is adulterated at a level of 0.1%. NIRM and NIR hyperspectral imaging are running under accreditation ISO 17025 since 2005 at CRA-W. A quantitative NIRM approach has been developed in order to fulfill the new requirements of the European commission policies. The capacities of NIRM method have been improved; only the raw fraction is analyzed, both the gross and the fine fractions of the samples are considered, and the acquisition parameters are optimized (the aperture, the gap, and the composition of the animal feed). A mapping method for a faster collection of spectra is also developed. The aim of this work is to show the new advances in the analytical methods developed in the frame of the feed ban applied in Europe.

Development of the numerical method for liquid metal magnetohydrodynamics (I). Investigation of the method and development of the 2D method

International Nuclear Information System (INIS)

Ohira, H.; Ara, K.

2002-11-01

Advanced electromagnetic components are investigated in Feasibility Studies on Commercialized FR Cycle System to apply to the main cooling systems of Liquid Metal Fast Reactor. Although a lot of experiments and numerical analysis were carried out on both high Reynolds numbers and high magnetic Reynolds numbers, the complex phenomena could not be evaluated in detail. As the first step of the development of the numerical methods for the liquid metal magnetohydrodynamics, we investigated numerical methods that could be applied to the electromagnetic components with both complex structures and high magnetic turbulent field. As a result, we selected GSMAC (Generalized-Simplified MArker and Cell) method for calculating the liquid metal fluid dynamics because it could be easily applied to the complex flow field. We also selected the vector-FEM for calculating the magnetic field of the large components because the method had no interaction procedure. In the high magnetic turbulent field, the dynamic-SGS models would be also a promising model for the good estimation, because it could calculate the field directly without any experimental constant. In order to verify the GSMAC and the vector-FEM, we developed the 2D numerical models and calculated the magnetohydrodynamics in the large electromagnetic pump. It was estimated from these results that the methods were basically reasonable, because the calculated pressure differences had the similar tendencies to the experimental ones. (author)

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

The prosa methodology for scenario development

International Nuclear Information System (INIS)

Grupa, J.B.

2001-01-01

In this paper a methodology for scenario development is proposed. The method is developed in an effort to convince ourselves (and others) that all conceivable future developments of a waste repository have been covered. To be able to assess all conceivable future developments, the method needs to be comprehensive. To convince us and others the method should be structured in such a way that the treatment of each conceivable future development is traceable. The methodology is currently being applied to two Dutch disposal designs. Preliminary results show that the elaborated method functions better than the original method. However, some elements in the method will need further refinement. (author)

Parent-of-origin and trans-generational germline influences on behavioral development: the interacting roles of mothers, fathers, and grandparents.

Science.gov (United States)

Curley, J P; Mashoodh, R

2010-05-01

Mothers and fathers do not contribute equally to the development of their offspring. In addition to the differential investment of mothers versus fathers in the rearing of offspring, there are also a number of germline factors that are transmitted unequally from one parent or the other that contribute significantly to offspring development. This article shall review four major sources of such parent-of-origin effects. Firstly, there is increasing evidence that genes inherited on the sex chromosomes including the nonpseudoautosomal part of the Y chromosome that is only inherited from fathers to sons, contribute to brain development and behavior independently of the organizing effects of sex hormones. Secondly, recent work has demonstrated that mitochondrial DNA that is primarily inherited only from mothers may play a much greater than anticipated role in neurobehavioral development. Thirdly, there exists a class of genes known as imprinted genes that are epigenetically silenced when passed on in a parent-of-origin specific manner and have been shown to regulate brain development and a variety of behaviors. Finally, there is converging evidence from several disciplines that environmental variations experienced by mothers and fathers may lead to plasticity in the development and behavior of offspring and that this phenotypic inheritance can be solely transmitted through the germline. Mechanistically, this may be achieved through altered programming within germ cells of the epigenetic status of particular genes such as retrotransposons and imprinted genes or potentially through altered expression of RNAs within gametes.

The Origin of Black Smock and White Collar

Science.gov (United States)

Hesapcioglu, Muhsin; Meseci Giorgetti, Filiz

2009-01-01

Although there are many empirical studies on the functions of school uniform, studies which focus on the origins of school uniform are neglected. Purpose of this study is to reveal historical origins of black smock and white collar. To achieve this purpose, a qualitative research method was adopted. As a result of the research, it was determined…

Development of an original active thermography method adapted to ITER plasma facing components control

Energy Technology Data Exchange (ETDEWEB)

Durocher, A.; Vignal, N.; Escourbiac, F.; Farjon, J.L.; Schlosser, J. [CEA Cadarache, Dept. de Recherches sur la Fusion Controlee, 13 - Saint-Paul-lez-Durance (France); Cismondi, F. [Toulon Univ., 83 - La Garde (France)

2004-07-01

Among all Non-Destructive Examinations (NDE), active infrared thermography is becoming recognised as a technique available today for improving quality control of many materials and structures involved in heat transfer. The infrared thermography allows to characterise the bond between two materials having different thermal physical properties. In order to increase the defect detection limit of the SATIR test bed, several possibilities have been evaluated to improve the infrared thermography inspection. The implementation in 2003 of a micro-bolometer camera and the improving of the thermo-signal process allowed to increase considerably the detection sensitivity of the SATIR facility. The quality, the spatial stability of infrared image and the detection of edge defect have been also improved. The coupling on the same test bed of SATIR method with a lock-in thermography will be evaluated in this paper. An improvement of the global reliability is expected by data merging produced by the two thermal excitation sources. A new enhanced facility named SATIRPACA has been designed for the full Non Destructive Examination of the High Heat Flux ITER components taking into account these main improvements. These systematic acceptance tests obviously need tools for quality control of critical parts. (authors)

Development of an original active thermography method adapted to ITER plasma facing components control

International Nuclear Information System (INIS)

Durocher, A.; Vignal, N.; Escourbiac, F.; Farjon, J.L.; Schlosser, J.; Cismondi, F.

2004-01-01

Among all Non-Destructive Examinations (NDE), active infrared thermography is becoming recognised as a technique available today for improving quality control of many materials and structures involved in heat transfer. The infrared thermography allows to characterise the bond between two materials having different thermal physical properties. In order to increase the defect detection limit of the SATIR test bed, several possibilities have been evaluated to improve the infrared thermography inspection. The implementation in 2003 of a micro-bolometer camera and the improving of the thermo-signal process allowed to increase considerably the detection sensitivity of the SATIR facility. The quality, the spatial stability of infrared image and the detection of edge defect have been also improved. The coupling on the same test bed of SATIR method with a lock-in thermography will be evaluated in this paper. An improvement of the global reliability is expected by data merging produced by the two thermal excitation sources. A new enhanced facility named SATIRPACA has been designed for the full Non Destructive Examination of the High Heat Flux ITER components taking into account these main improvements. These systematic acceptance tests obviously need tools for quality control of critical parts. (authors)

Development and Validation of a Dissolution Test Method for ...

African Journals Online (AJOL)

Purpose: To develop and validate a dissolution test method for dissolution release of artemether and lumefantrine from tablets. Methods: A single dissolution method for evaluating the in vitro release of artemether and lumefantrine from tablets was developed and validated. The method comprised of a dissolution medium of ...

A Model-Driven Development Method for Management Information Systems

Science.gov (United States)

Mizuno, Tomoki; Matsumoto, Keinosuke; Mori, Naoki

Traditionally, a Management Information System (MIS) has been developed without using formal methods. By the informal methods, the MIS is developed on its lifecycle without having any models. It causes many problems such as lack of the reliability of system design specifications. In order to overcome these problems, a model theory approach was proposed. The approach is based on an idea that a system can be modeled by automata and set theory. However, it is very difficult to generate automata of the system to be developed right from the start. On the other hand, there is a model-driven development method that can flexibly correspond to changes of business logics or implementing technologies. In the model-driven development, a system is modeled using a modeling language such as UML. This paper proposes a new development method for management information systems applying the model-driven development method to a component of the model theory approach. The experiment has shown that a reduced amount of efforts is more than 30% of all the efforts.

MODELS AND METHODS OF SAFETY-ORIENTED PROJECT MANAGEMENT OF DEVELOPMENT OF COMPLEX SYSTEMS: METHODOLOGICAL APPROACH

Directory of Open Access Journals (Sweden)

Олег Богданович ЗАЧКО

2016-03-01

Full Text Available The methods and models of safety-oriented project management of the development of complex systems are proposed resulting from the convergence of existing approaches in project management in contrast to the mechanism of value-oriented management. A cognitive model of safety oriented project management of the development of complex systems is developed, which provides a synergistic effect that is to move the system from the original (pre condition in an optimal one from the viewpoint of life safety - post-project state. The approach of assessment the project complexity is proposed, which consists in taking into account the seasonal component of a time characteristic of life cycles of complex organizational and technical systems with occupancy. This enabled to take into account the seasonal component in simulation models of life cycle of the product operation in complex organizational and technical system, modeling the critical points of operation of systems with occupancy, which forms a new methodology for safety-oriented management of projects, programs and portfolios of projects with the formalization of the elements of complexity.

WORD ORIGIN HELPS EXPAND LEARNERS’ VOCABULARY A VOCABULARY TEACHING APPROACH

OpenAIRE

Li Jing

2012-01-01

Word origin (motivation) deals with the connection between name and sense, explaining how a word originated. With the knowledge of how words are originated, learners can grasp a word easier and thus expand their vocabulary more quickly. The introduction to word origin (motivation) by teachers can also help the learners gain interest in the process of learning and learn more about the cultural and historical background of the English-speaking countries. This paper tries to clarify this method ...

Feedback of reactor operating data to nuclear methods development

International Nuclear Information System (INIS)

Crowther, R.L.; Kang, C.M.; Parkos, G.R.; Wolters, R.A.

1978-01-01

The problems in obtaining power reactor data for reliable nuclear methods development and the major sources of power reactor data for this purpose are reviewed. Specific examples of the use of power reactor data in nuclear methods development are discussed. The paper concludes with recommendations on the key elements of an effective program to use power reactor data in nuclear methods development

Original and Derived Judgment

DEFF Research Database (Denmark)

Foss, Kirsten; Foss, Nicolai Juul; Klein, Peter G.

and own assets. The entrepreneur's role, then, is to arrange or organize the human and capital assets under his control. We extend this Knightian concept of the firm by developing a theory of delegation under Knightian uncertainty. What we call original judgment belongs exclusively to owners, but owners...

Origins and development of the Cauchy problem in general relativity

International Nuclear Information System (INIS)

Ringström, Hans

2015-01-01

The seminal work of Yvonne Choquet-Bruhat published in 1952 demonstrates that it is possible to formulate Einstein's equations as an initial value problem. The purpose of this article is to describe the background to and impact of this achievement, as well as the result itself. In some respects, the idea of viewing the field equations of general relativity as a system of evolution equations goes back to Einstein himself; in an argument justifying that gravitational waves propagate at the speed of light, Einstein used a special choice of coordinates to derive a system of wave equations for the linear perturbations on a Minkowski background. Over the following decades, Hilbert, de Donder, Lanczos, Darmois and many others worked to put Einstein's ideas on a more solid footing. In fact, the issue of local uniqueness (giving a rigorous justification for the statement that the speed of propagation of the gravitational field is bounded by that of light) was already settled in the 1930s by the work of Stellmacher. However, the first person to demonstrate both local existence and uniqueness in a setting in which the notion of finite speed of propagation makes sense was Yvonne Choquet-Bruhat. In this sense, her work lays the foundation for the formulation of Einstein's equations as an initial value problem. Following a description of the results of Choquet-Bruhat, we discuss the development of three research topics that have their origin in her work. The first one is local existence. One reason for addressing it is that it is at the heart of the original paper. Moreover, it is still an active and important research field, connected to the problem of characterizing the asymptotic behaviour of solutions that blow up in finite time. As a second topic, we turn to the questions of global uniqueness and strong cosmic censorship. These questions are of fundamental importance to anyone interested in justifying that the Cauchy problem makes sense globally. They are

DNA replication origins-where do we begin?

Science.gov (United States)

Prioleau, Marie-Noëlle; MacAlpine, David M

2016-08-01

For more than three decades, investigators have sought to identify the precise locations where DNA replication initiates in mammalian genomes. The development of molecular and biochemical approaches to identify start sites of DNA replication (origins) based on the presence of defining and characteristic replication intermediates at specific loci led to the identification of only a handful of mammalian replication origins. The limited number of identified origins prevented a comprehensive and exhaustive search for conserved genomic features that were capable of specifying origins of DNA replication. More recently, the adaptation of origin-mapping assays to genome-wide approaches has led to the identification of tens of thousands of replication origins throughout mammalian genomes, providing an unprecedented opportunity to identify both genetic and epigenetic features that define and regulate their distribution and utilization. Here we summarize recent advances in our understanding of how primary sequence, chromatin environment, and nuclear architecture contribute to the dynamic selection and activation of replication origins across diverse cell types and developmental stages. © 2016 Prioleau and MacAlpine; Published by Cold Spring Harbor Laboratory Press.

Development of Dissolution Test Method for Drotaverine ...

African Journals Online (AJOL)

Development of Dissolution Test Method for Drotaverine ... Methods: Sink conditions, drug stability and specificity in different dissolution media were tested to optimize a dissolution test .... test by Prism 4.0 software, and differences between ...

Home economics: origin, development and professional working field

Directory of Open Access Journals (Sweden)

Ana Carla Menezes de Oliveira

2010-05-01

Full Text Available Home Economics is not only a set of practical knowledge housewives must possess to prepare food empirically, make and repair clothes, take care of their children and do domestic chores. The objective of this article is to discuss the area of Economics defined as Home Economics, focusing on its origin, evolution, the working field of its specialists and its prospects for the 21st century. Results show the need for scientific and professional knowledge of Home Economics in schools, families and society. The study of Home Economics is of great importance because both school and family are part of society and present very complex phenomena, therefore an adequate and efficient solution for those phenomena demand the knowledge of specialized scientific notions of Home Economics.

A Newly Developed Method for Computing Reliability Measures in a Water Supply Network

Directory of Open Access Journals (Sweden)

Jacek Malinowski

2016-01-01

Full Text Available A reliability model of a water supply network has beens examined. Its main features are: a topology that can be decomposed by the so-called state factorization into a (relativelysmall number of derivative networks, each having a series-parallel structure (1, binary-state components (either operative or failed with given flow capacities (2, a multi-state character of the whole network and its sub-networks - a network state is defined as the maximal flow between a source (sources and a sink (sinks (3, all capacities (component, network, and sub-network have integer values (4. As the network operates, its state changes due to component failures, repairs, and replacements. A newly developed method of computing the inter-state transition intensities has been presented. It is based on the so-called state factorization and series-parallel aggregation. The analysis of these intensities shows that the failure-repair process of the considered system is an asymptotically homogenous Markov process. It is also demonstrated how certain reliability parameters useful for the network maintenance planning can be determined on the basis of the asymptotic intensities. For better understanding of the presented method, an illustrative example is given. (original abstract

Re-Planning for Compensator-Based IMRT with Original Compensators

International Nuclear Information System (INIS)

Zhang, Geoffrey; Feygelman, Vladimir; Stevens, Craig; Li Weiqi; Leuthold, Susan; Springett, Gregory; Hoffe, Sarah

2011-01-01

Compared with multileaf collimator (MLC)-based intensity-modulated radiotherapy (IMRT) for moving targets, compensator-based IMRT has advantages such as shorter beam-on time, fewer monitor units with potentially decreased secondary carcinogenesis risk, better optimization-to-deliverable dose conversion, and often better dose conformity. Some of the disadvantages include additional time for the compensators to be built and delivered, as well as extra cost. Patients undergoing treatment of abdominal cancers often experience weight loss. It would be necessary to account for this change in weight with a new plan and a second set of compensators. However, this would result in treatment delays and added costs. We have developed a method to re-plan the patient using the same set of compensators. Because the weight changes seen with the treatment of abdominal cancers are usually relatively small, a new 4D computed tomography (CT) acquired in the treatment position with markers on the original isocenter tattoos can be registered to the original planning scan. The contours of target volumes from the original scans are copied to the new scan after fusion. The original compensator set can be used together with a few field-in-field (FiF) beams defined by the MLC (or beams with cerrobend blocks for accelerators not equipped with a MLC). The weights of the beams with compensators are reduced so that the FiF or blocked beams can be optimized to mirror the original plan and dose distribution. Seven abdominal cancer cases are presented using this technique. The new plan on the new planning CT images usually has the same dosimetric quality as the original. The target coverage and dose uniformity are improved compared with the plan without FiF/block modification. Techniques combining additional FiF or blocked beams with the original compensators optimize the treatment plans when patients lose weight and save time and cost compared with generating plans with a new set of compensators.

The origins of scientific cinematography and early medical applications.

Science.gov (United States)

Barboi, Alexandru C; Goetz, Christopher G; Musetoiu, Radu

2004-06-08

To examine the neurologic cinematographic contributions of Gheorghe Marinescu. Near the end of the 19th century, cinematography developed and was immediately recognized as a new technique applicable to medical documentation. After studying with several prominent European neurologists and deeply influenced by Jean-Martin Charcot, Marinescu returned to Bucharest in 1897 and applied moving picture techniques to the study of neurologic patients. The Romanian State Archives were researched for original Marinescu films, and related publications were translated from Romanian and French. Between 1899 and 1902, Marinescu perfected the use of cinematography as a research method in neurosciences and published five articles based on cinematographic documents. He focused his studies particularly on organic gait disorders, locomotor ataxia, and hysteria. He adapted Charcot's method of lining up several patients with the same disorder and showing them together to permit appreciation of archetypes and formes frustes. He decomposed the moving pictures into sequential tracings for publication. He documented treatment results with cases filmed before and after therapy. Processed and digitized excerpts of these films accompany this manuscript. Marinescu's cinematographic studies led to several original contributions in clinical neurology. Remaining film archives include examples of many neurologic diseases, his examination techniques, and the working medical environment of the young founder of the Romanian school of neurology.

Tracking maize pollen development by the Leaf Collar Method.

Science.gov (United States)

Begcy, Kevin; Dresselhaus, Thomas

2017-12-01

An easy and highly reproducible nondestructive method named the Leaf Collar Method is described to identify and characterize the different stages of pollen development in maize. In plants, many cellular events such as meiosis, asymmetric cell division, cell cycle regulation, cell fate determination, nucleus movement, vacuole formation, chromatin condensation and epigenetic modifications take place during pollen development. In maize, pollen development occurs in tassels that are confined within the internal stalk of the plant. Hence, identification of the different pollen developmental stages as a tool to investigate above biological processes is impossible without dissecting the entire plant. Therefore, an efficient and reproducible method is necessary to isolate homogeneous cell populations at individual stages throughout pollen development without destroying the plant. Here, we describe a method to identify the various stages of pollen development in maize. Using the Leaf Collar Method in the maize inbreed line B73, we have determined the duration of each stage from pollen mother cells before meiosis to mature tricellular pollen. Anther and tassel size as well as percentage of pollen stages were correlated with vegetative stages, which are easily recognized. The identification of stage-specific genes indicates the reproducibility of the method. In summary, we present an easy and highly reproducible nondestructive method to identify and characterize the different stages of pollen development in maize. This method now opens the way for many subsequent physiological, morphological and molecular analyses to study, for instance, transcriptomics, metabolomics, DNA methylation and chromatin patterns during normal and stressful conditions throughout pollen development in one of the economically most important grass species.

METHOD TO DEVELOP THE DOUBLE-CURVED SURFACE OF THE ROOF

Directory of Open Access Journals (Sweden)

JURCO Ancuta Nadia

2017-05-01

Full Text Available This work present two methods for determining the development of double-curved surface. The aims of this paper is to show a comparative study between methods for determination of the sheet metal requirements for complex roof cover shape. In first part of the paper are presented the basic sketch and information about the roof shape and some consecrated buildings, which have a complex roof shape. The second part of the paper shows two methods for determining the developed of the spherical roof. The graphical method is the first method used for developing of the spherical shape. In this method it used the poly-cylindrical method to develop the double-curved surface. The second method is accomplishing by using the dedicated CAD software method.

USING ANALYTIC HIERARCHY PROCESS (AHP METHOD IN RURAL DEVELOPMENT

Directory of Open Access Journals (Sweden)

Tülay Cengiz

2003-04-01

Full Text Available Rural development is a body of economical and social policies towards improving living conditions in rural areas through enabling rural population to utilize economical, social, cultural and technological blessing of city life in place, without migrating. As it is understood from this description, rural development is a very broad concept. Therefore, in development efforts problem should be stated clearly, analyzed and many criterias should be evaluated by experts. Analytic Hierarchy Process (AHP method can be utilized at there stages of development efforts. AHP methods is one of multi-criteria decision method. After degrading a problem in smaller pieces, relative importance and level of importance of two compared elements are determined. It allows evaluation of quality and quantity factors. At the same time, it permits utilization of ideas of many experts and use them in decision process. Because mentioned features of AHP method, it could be used in rural development works. In this article, cultural factors, one of the important components of rural development is often ignored in many studies, were evaluated as an example. As a result of these applications and evaluations, it is concluded that AHP method could be helpful in rural development efforts.

Validated modified Lycopodium spore method development for ...

African Journals Online (AJOL)

Validated modified lycopodium spore method has been developed for simple and rapid quantification of herbal powdered drugs. Lycopodium spore method was performed on ingredients of Shatavaryadi churna, an ayurvedic formulation used as immunomodulator, galactagogue, aphrodisiac and rejuvenator. Estimation of ...

Development of Three Methods for Simultaneous Quantitative ...

African Journals Online (AJOL)

Development of Three Methods for Simultaneous Quantitative Determination of Chlorpheniramine Maleate and Dexamethasone in the Presence of Parabens in ... Tropical Journal of Pharmaceutical Research ... Results: All the proposed methods were successfully applied to the analysis of raw materials and dosage form.

The Origin of the Universe

DEFF Research Database (Denmark)

Ramazanov, Sabir

. For this purpose, we employ the quadratic maximum likelihood method, and apply it to the search of the statistical anisotropy in the seven-year WMAP data. We confirm the large quadrupole anisotropy detected in V and W bands, which has been argued to originate from systematic eects rather than from cosmology. We...

Study on the meat isotopic composition for origin identification

Directory of Open Access Journals (Sweden)

Irina Chernukha

2018-03-01

Full Text Available Russian consumer and governmental authorities are equally concerned to know where food products come from. This requires more accurate and specialized methods for the evaluation of geographical location. The following methods are used: chemometrics, histological and histochemical, genomic and proteomic, microbiological, immunochemical and mass spectrometric. Method of stable isotope analysis is becoming increasingly promising nowadays for the identification of meat and meat products' place of origin. The isotope ratios of the four elements - carbon, nitrogen, oxygen and hydrogen, are mainly determined. The method is successfully used to identify a country of origin of wines, juices and water. The aim of the research was to study the stable isotope ratios for pork and beef samples purchased in Moscow supermarkets (Russian Federation. The country of production of meat samples was determined according to specifications and/or labels. The geography of countries of meat samples origin includes Europe, both America continents and Australia. Databases collected by the All-Russian Scientific Research Institute of the Brewing, Non-Alcoholic and Wine Industrywere used for the analysis and interpretation of the results. Values of 13С/12С, δ13С, 18О/16О, δ18О, 2Н/1Н, δ2Н for 30 pork and beef samples from 13 countries were obtained. Differences in stable isotope ratios were found depending on place of origin. The data correlated with the oxygen isotope characteristics for wine, which were in the range from 2.5 to 4.5 ppm. According to the 13С/12С, δ13С results, the assumption was made about a false indication of the region for the beef sample. Despite the fact that beef was labeled as a product of Lithuania, the region of origin was most probably defined as Germany. The studies carried out showed the possibility to identify the region of raw meat origin by the stable isotope ratio.

Potential Use of Agile Methods in Selected DoD Acquisitions: Requirements Development and Management

Science.gov (United States)

2014-04-01

guidelines. 9 Kanban is a technique for managing workflow originating from the lean engineering methods pioneered by Toyota. [Reinertsen 2009...Cockburn, Alistair, & Pols, Andy. Patterns for Effective Use Cas- es. Addison-Wesley, 2002. Anderson, David. Kanban . Blue Hole Press, 2010. CMU/SEI-2013

Characterization of calcium phosphate powders originating from Phyllacanthus imperialis and Trochidae Infundibulum concavus marine shells

International Nuclear Information System (INIS)

Tămăşan, M.; Ozyegin, L.S.; Oktar, F.N.; Simon, V.

2013-01-01

The study reports the preparation and characterization of powders consisting of the different phases of calcium phosphates that were obtained from the naturally derived raw materials of sea-shell origins reacted with H 3 PO 4 . Species of sea origin, such as corals and nacres, attracted a special interest in bone tissue engineering area. Nacre shells are built up of calcium carbonate in aragonite form crystallized in an organic matrix. In this work two natural marine origin materials (shells of echinoderm Sputnik sea urchin — Phyllacanthus imperialis and Trochidae Infundibulum concavus mollusk) were involved in the developing powders of calcium phosphate based biomaterials (as raw materials for bone-scaffolds) by hotplate and ultrasound methods. Thermal analyses of the as-prepared materials were made for an assessment of the thermal behavior and heat treatment temperatures. Samples from both sea shells each of them prepared by the above mentioned methods were subjected to thermal treatments at 450 °C and 850 °C in order to evaluate the crystalline transformations of the calcium phosphate structures in the heating process. By X-ray diffraction analyses various calcium phosphate phases were identified. In Sputnik sea urchins originated samples were found predominantly brushite and calcite as a small secondary phase, while in Trochidae I. concavus samples mainly monetite and HA phases were identified. Thermal treatment at 850 °C resulted flat-plate whitlockite crystals — β-MgTCP [(Ca, Mg) 3 (PO 4 ) 2 ] for both samples regardless the preparation method (ultrasound or hotplate) or the targeted Ca/P molar ratio according with XRD patterns. Scanning electron microscopy and Fourier transformed infrared spectroscopy were involved more in the characterization of these materials and the good correlations of the results of these methods were made. - Highlights: ► Calcium phosphate powders are obtained from the crushed shells of 2 “marine” species and H 3 PO 4

Characterization of calcium phosphate powders originating from Phyllacanthus imperialis and Trochidae Infundibulum concavus marine shells

Energy Technology Data Exchange (ETDEWEB)

Tămăşan, M., E-mail: monica.tamasan@phys.ubbcluj.ro [Babeş-Bolyai University, Faculty of Physics and Interdisciplinary Research Institute on Bio-Nano-Sciences, Cluj-Napoca (Romania); Ozyegin, L.S. [Marmara University, Istanbul (Turkey); Oktar, F.N. [Marmara University, Faculty of Engineering, Department of Bioengineering, Göztepe Campus, Kadıköy 34722, Istanbul (Turkey); Marmara University, School of Health Related Professions, Department of Medical Imaging Technics, Haydarpaşa Campus, Tıbbiye Street, 49, Üsküdar 34668, Istanbul (Turkey); Marmara University, Nanotechnology and Biomaterials Application and Research Centre, Göztepe Campus, Kadıköy 34722, Istanbul (Turkey); Simon, V. [Babeş-Bolyai University, Faculty of Physics and Interdisciplinary Research Institute on Bio-Nano-Sciences, Cluj-Napoca (Romania)

2013-07-01

The study reports the preparation and characterization of powders consisting of the different phases of calcium phosphates that were obtained from the naturally derived raw materials of sea-shell origins reacted with H{sub 3}PO{sub 4}. Species of sea origin, such as corals and nacres, attracted a special interest in bone tissue engineering area. Nacre shells are built up of calcium carbonate in aragonite form crystallized in an organic matrix. In this work two natural marine origin materials (shells of echinoderm Sputnik sea urchin — Phyllacanthus imperialis and Trochidae Infundibulum concavus mollusk) were involved in the developing powders of calcium phosphate based biomaterials (as raw materials for bone-scaffolds) by hotplate and ultrasound methods. Thermal analyses of the as-prepared materials were made for an assessment of the thermal behavior and heat treatment temperatures. Samples from both sea shells each of them prepared by the above mentioned methods were subjected to thermal treatments at 450 °C and 850 °C in order to evaluate the crystalline transformations of the calcium phosphate structures in the heating process. By X-ray diffraction analyses various calcium phosphate phases were identified. In Sputnik sea urchins originated samples were found predominantly brushite and calcite as a small secondary phase, while in Trochidae I. concavus samples mainly monetite and HA phases were identified. Thermal treatment at 850 °C resulted flat-plate whitlockite crystals — β-MgTCP [(Ca, Mg){sub 3} (PO{sub 4}){sub 2}] for both samples regardless the preparation method (ultrasound or hotplate) or the targeted Ca/P molar ratio according with XRD patterns. Scanning electron microscopy and Fourier transformed infrared spectroscopy were involved more in the characterization of these materials and the good correlations of the results of these methods were made. - Highlights: ► Calcium phosphate powders are obtained from the crushed shells of 2 �

Using rare earth elements for the identification of the geographic origin of food

Science.gov (United States)

Meisel, T.; Bandoniene, D.; Joebstl, D.

2009-04-01

The European Union defined regimes within the Protected Geographical Status (PGS) framework to protect names of regional food specialities. Thus only food produced in a specific geographical area with a specific way of production or quality can be protected by a protected geographical indication (PGI) label. As such Styrian Pumpkin Seed Oil has been approved with this label, but as with many other high priced regional specialities, fraud cannot be excluded or nor identified. Thus the aim of this work is, to develop an analytical method for the control of the geographic origin of pumpkin seed oil and also to test the method for other protected products. The development of such a method is not only of interest for scientists, but also of importance for the consumer wanting to know the origin of the food products and the assurance of the purity and quality. The group of rare earth elements (REE) in plants also have a characteristic distribution pattern similar to upper crustal REE distributions. Since the REE concentrations are extremely low in pumpkin seed oil (ppt to low ppb), ICP-MS was the only sensitive tool able to produce validated results. The carrier of the REE are most likely small particles distributed within the pumpkin seed oil. Unlike, e.g., olive oil, pumpkin seed oil is bottled and sold unfiltered, which makes this Styrian speciality an interesting sampling target. As pumpkin seed oils from different geographic origin show variable trace element and rare earth distribution patterns, is should possible to trace the origin of these oils. In the current project pumpkin seeds from different regions in Austria and from abroad were sampled. The trace element patterns in the extracted oil of these seeds were determined and a preliminary classification with discriminate analysis was successfully done on a statistical basis. In addition to the study of the geographic origin it was demonstrated that REE distribution patterns can also be used for the

Software development for teleroentgenogram analysis

Science.gov (United States)

Goshkoderov, A. A.; Khlebnikov, N. A.; Obabkov, I. N.; Serkov, K. V.; Gajniyarov, I. M.; Aliev, A. A.

2017-09-01

A framework for the analysis and calculation of teleroentgenograms was developed. Software development was carried out in the Department of Children's Dentistry and Orthodontics in Ural State Medical University. The software calculates the teleroentgenogram by the original method which was developed in this medical department. Program allows designing its own methods for calculating the teleroentgenograms by new methods. It is planned to use the technology of machine learning (Neural networks) in the software. This will help to make the process of calculating the teleroentgenograms easier because methodological points will be placed automatically.

[Herbalism, botany and components analysis study on original plants of frankincense].

Science.gov (United States)

Sun, Lei; Xu, Jimin; Jin, Hongyu; Tian, Jingai; Lin, Ruichao

2011-01-01

In order to clarify original plants of traditional Chinese medicine (TCM) frankincense, a GC method for determination essential oils and a HPLC method for determination boswellic acids were carried out together with analysis of herbalism, botany, components and pharmacology papers of frankincense. It was concluded that original plants of TCM frankincense include at least Boswellia sacra, B. papyrifera and B. serrata.

Method æ, the agile software development method tailored for the pharmaceutical industry.

NARCIS (Netherlands)

Hajou, A.; Batenburg, R.S.; Jansen, S.

2015-01-01

Agile software development methods have a high adoption rate due to their proven business benefits. Its success has not yet been identified in the pharmaceutical industry, due to the industry’s incompatibility with generic agile methods. Comprehensive research has been done to engineer a tailored

Characterization, thermal stability studies, and analytical method development of Paromomycin for formulation development.

Science.gov (United States)

Khan, Wahid; Kumar, Neeraj

2011-06-01

Paromomycin (PM) is an aminoglycoside antibiotic, first isolated in the 1950s, and approved in 2006 for treatment of visceral leishmaniasis. Although isolated six decades back, sufficient information essential for development of pharmaceutical formulation is not available for PM. The purpose of this paper was to determine thermal stability and development of new analytical method for formulation development of PM. PM was characterized by thermoanalytical (DSC, TGA, and HSM) and by spectroscopic (FTIR) techniques and these techniques were used to establish thermal stability of PM after heating PM at 100, 110, 120, and 130 °C for 24 h. Biological activity of these heated samples was also determined by microbiological assay. Subsequently, a simple, rapid and sensitive RP-HPLC method for quantitative determination of PM was developed using pre-column derivatization with 9-fluorenylmethyl chloroformate. The developed method was applied to estimate PM quantitatively in two parenteral dosage forms. PM was successfully characterized by various stated techniques. These techniques indicated stability of PM for heating up to 120 °C for 24 h, but when heated at 130 °C, PM is liable to degradation. This degradation is also observed in microbiological assay where PM lost ∼30% of its biological activity when heated at 130 °C for 24 h. New analytical method was developed for PM in the concentration range of 25-200 ng/ml with intra-day and inter-day variability of stability of PM was determined successfully. Developed analytical method was found sensitive, accurate, and precise for quantification of PM. Copyright © 2010 John Wiley & Sons, Ltd. Copyright © 2010 John Wiley & Sons, Ltd.

Mitochondrial DNA and trade data support multiple origins of Helicoverpa armigera (Lepidoptera, Noctuidae) in Brazil

Science.gov (United States)

Tay, Wee Tek; Walsh, Thomas K.; Downes, Sharon; Anderson, Craig; Jermiin, Lars S.; Wong, Thomas K. F.; Piper, Melissa C.; Chang, Ester Silva; Macedo, Isabella Barony; Czepak, Cecilia; Behere, Gajanan T.; Silvie, Pierre; Soria, Miguel F.; Frayssinet, Marie; Gordon, Karl H. J.

2017-03-01

The Old World bollworm Helicoverpa armigera is now established in Brazil but efforts to identify incursion origin(s) and pathway(s) have met with limited success due to the patchiness of available data. Using international agricultural/horticultural commodity trade data and mitochondrial DNA (mtDNA) cytochrome oxidase I (COI) and cytochrome b (Cyt b) gene markers, we inferred the origins and incursion pathways into Brazil. We detected 20 mtDNA haplotypes from six Brazilian states, eight of which were new to our 97 global COI-Cyt b haplotype database. Direct sequence matches indicated five Brazilian haplotypes had Asian, African, and European origins. We identified 45 parsimoniously informative sites and multiple substitutions per site within the concatenated (945 bp) nucleotide dataset, implying that probabilistic phylogenetic analysis methods are needed. High diversity and signatures of uniquely shared haplotypes with diverse localities combined with the trade data suggested multiple incursions and introduction origins in Brazil. Increasing agricultural/horticultural trade activities between the Old and New Worlds represents a significant biosecurity risk factor. Identifying pest origins will enable resistance profiling that reflects countries of origin to be included when developing a resistance management strategy, while identifying incursion pathways will improve biosecurity protocols and risk analysis at biosecurity hotspots including national ports.

Advanced evaluation method of SG TSP BEC hole blockage rate

International Nuclear Information System (INIS)

Izumida, Hiroyuki; Nagata, Yasuyuki; Harada, Yutaka; Murakami, Ryuji

2003-01-01

In spite of the control of the water chemistry of SG secondary feed-water in PWR-SG, SG TSP BEC holes, which are the flow path of secondary water, are often clogged. In the past, the trending of BEC hole blockage rate has conducted by evaluating ECT original signals and visual inspections. However, the ECT original signals of deposits are diversified, it becomes difficult to analyze them with the existing evaluation method using the ECT original signals. In this regard, we have developed the secondary side visual inspection system, which enables the high-accuracy evaluation of BEC hole blockage rate, and new ECT signal evaluation method. (author)

Origin-Independent Sum Over States Simulations of Magnetic and Electronic Circular Dichroism Spectra via the Localized Orbital/Local Origin Method

Czech Academy of Sciences Publication Activity Database

Štěpánek, Petr; Bouř, Petr

2015-01-01

Roč. 36, č. 10 (2015), s. 723-730 ISSN 0192-8651 R&D Projects: GA ČR GA13-03978S; GA ČR GAP208/11/0105 Grant - others:GA AV ČR(CZ) M200551205 Institutional support: RVO:61388963 Keywords : density functional theory * electronic circular dichroism * magnetic circular dichroism * origin-dependence Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.648, year: 2015

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes.

Science.gov (United States)

Zahabiun, Farzaneh; Sadjjadi, Seyed Mahmoud; Esfandiari, Farideh

2015-01-01

Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Using this method is cost effective and fast for mounting of small nematodes comparing to classic method.

Method Development and Monitoring of Cyanotoxins in Water

Science.gov (United States)

This presentation describes method development of two ambient water LC/MS/MS methods for microcystins, cylindrospermopsin and anatoxin-a. Ruggedness of the methods will be demonstrated by evaluation of quality control samples derived from various water bodies across the country.

Suitability of elemental fingerprinting for assessing the geographic origin of pumpkin (Cucurbita pepo var. styriaca) seed oil.

Science.gov (United States)

Bandoniene, Donata; Zettl, Daniela; Meisel, Thomas; Maneiko, Marija

2013-02-15

An analytical method was developed and validated for the classification of the geographical origin of pumpkin seeds and oil from Austria, China and Russia. The distribution of element traces in pumpkin seed and pumpkin seed oils in relation to the geographical origin of soils of several agricultural farms in Austria was studied in detail. Samples from several geographic origins were taken from parts of the pumpkin, pumpkin flesh, seeds, the oil extracted from the seeds and the oil-extraction cake as well as the topsoil on which the plants were grown. Plants from different geographical origin show variations of the elemental patterns that are significantly large, reproducible over the years and ripeness period and show no significant influence of oil production procedure, to allow to a discrimination of geographical origin. A successful differentiation of oils from different regions in Austria, China and Russia classified with multivariate data analysis is demonstrated. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of analysis methods for seismically isolated nuclear structures

International Nuclear Information System (INIS)

Yoo, Bong; Lee, Jae-Han; Koo, Gyeng-Hoi

2002-01-01

KAERI's contributions to the project entitled Development of Analysis Methods for Seismically Isolated Nuclear Structures under IAEA CRP of the intercomparison of analysis methods for predicting the behaviour of seismically isolated nuclear structures during 1996-1999 in effort to develop the numerical analysis methods and to compare the analysis results with the benchmark test results of seismic isolation bearings and isolated nuclear structures provided by participating countries are briefly described. Certain progress in the analysis procedures for isolation bearings and isolated nuclear structures has been made throughout the IAEA CRPs and the analysis methods developed can be improved for future nuclear facility applications. (author)

Development and Application of Kinetic Spectrophotometric Method ...

African Journals Online (AJOL)

Purpose: To develop an improved kinetic-spectrophotometric procedure for the determination of metronidazole (MNZ) in pharmaceutical formulations. Methods: The method is based on oxidation reaction of MNZ by hydrogen peroxide in the presence of Fe(II) ions at pH 4.5 (acetate buffer). The reaction was monitored ...

How Qualitative Methods Can be Used to Inform Model Development.

Science.gov (United States)

Husbands, Samantha; Jowett, Susan; Barton, Pelham; Coast, Joanna

2017-06-01

Decision-analytic models play a key role in informing healthcare resource allocation decisions. However, there are ongoing concerns with the credibility of models. Modelling methods guidance can encourage good practice within model development, but its value is dependent on its ability to address the areas that modellers find most challenging. Further, it is important that modelling methods and related guidance are continually updated in light of any new approaches that could potentially enhance model credibility. The objective of this article was to highlight the ways in which qualitative methods have been used and recommended to inform decision-analytic model development and enhance modelling practices. With reference to the literature, the article discusses two key ways in which qualitative methods can be, and have been, applied. The first approach involves using qualitative methods to understand and inform general and future processes of model development, and the second, using qualitative techniques to directly inform the development of individual models. The literature suggests that qualitative methods can improve the validity and credibility of modelling processes by providing a means to understand existing modelling approaches that identifies where problems are occurring and further guidance is needed. It can also be applied within model development to facilitate the input of experts to structural development. We recommend that current and future model development would benefit from the greater integration of qualitative methods, specifically by studying 'real' modelling processes, and by developing recommendations around how qualitative methods can be adopted within everyday modelling practice.

Development of standard testing methods for nuclear-waste forms

International Nuclear Information System (INIS)

Mendel, J.E.; Nelson, R.D.

1981-11-01

Standard test methods for waste package component development and design, safety analyses, and licensing are being developed for the Nuclear Waste Materials Handbook. This paper describes mainly the testing methods for obtaining waste form materials data

Developing a reliable signal wire attachment method for rail.

Science.gov (United States)

2014-11-01

The goal of this project was to develop a better attachment method for rail signal wires to improve the reliability of signaling : systems. EWI conducted basic research into the failure mode of current attachment methods and developed and tested a ne...

Financing modes and methods for nuclear power development in developing countries

International Nuclear Information System (INIS)

Su Qun

1999-02-01

In financing for nuclear power project in developing countries, governmental support is significant in reducing the risk of the project and improving the financing environment. Issues studied and discussed include financing conditions and methods, export credit and supply. An appropriate solution of the financing problem will play an important role in developing nuclear power

Harbourscape Aalborg - Design Based Methods in Waterfront Development

DEFF Research Database (Denmark)

Kiib, Hans

2012-01-01

How can city planners and developers gain knowledge and develop new sustainable concepts for water front developments? The waterfront is far too often threatened by new privatisation, lack of public access and bad architecture. And in a time where low growth rates and crises in the building...... industry is leaving great parts of the harbour as urban voids planners are in search of new tools for bridging the time gap until new projects can be a reality. This chapter presents the development of waterfront regeneration concepts that resulted from design based workshops, Harbourscape Aalborg in 2005...... and Performative Architecture Workshop in 2008, and evaluates the method and the thinking behind this. The design workshops provide different design-based development methods which can be tested with the purpose of developing new concepts for the relationship between the city and its harbour, and in addition...

A Method for Development of Ecomuseums in Taiwan

Directory of Open Access Journals (Sweden)

Zhen-Hui Liu

2015-09-01

Full Text Available One component of the new museology is the ecomuseum, which is intended to preserve cultural/natural heritage and the local landscape in situ, and involves community participation and needs associated with community development. Since the ecomuseum concept originated in Western Europe, ecomuseums must be adapted or localized to various socio-economic environments. In the 2000s, two mining ecomuseums were established in New Taipei City—the Gold Museum and the Houtong Coal Mine Ecological Park. In the early 2010s, two more ecomuseums were established—the Daxi Wood Art Ecomuseum and the Togo Art Museum. More than the mining ecomuseums, the Daxi Wood Art Ecomuseum emphasized community participation and the vision of the Togo Art Museum was led by the community. Based on an analysis of the Houtong Coal Mine Ecological Park, the Daxi Wood Art Ecomuseum and the Togo Art Museum, this study elucidates the various mechanisms of the development of ecomuseums in Taiwan. Ecomuseums should be interconnected with the community and the environment. The three major functions of ecomuseums (community participation, local development, and in-situ preservation can promote sustainable development. This study uses the “creativity triangle” concept with a three-year cycle of development as an analytical tool. The concept was modified to include three stages of development, which are “estimation”, “preparation”, and “operation”; six steps and 11 tasks are proposed. Despite the unique circumstances of each ecomuseum, this study provides an overview of the development processes and provides a basis for making recommendations for establishing other ecomuseums in Taiwan.

Bovine origin Staphylococcus aureus: A new zoonotic agent?

Science.gov (United States)

Rao, Relangi Tulasi; Jayakumar, Kannan; Kumar, Pavitra

2017-10-01

The study aimed to assess the nature of animal origin Staphylococcus aureus strains. The study has zoonotic importance and aimed to compare virulence between two different hosts, i.e., bovine and ovine origin. Conventional polymerase chain reaction-based methods used for the characterization of S. aureus strains and chick embryo model employed for the assessment of virulence capacity of strains. All statistical tests carried on R program, version 3.0.4. After initial screening and molecular characterization of the prevalence of S. aureus found to be 42.62% in bovine origin samples and 28.35% among ovine origin samples. Meanwhile, the methicillin-resistant S. aureus prevalence is found to be meager in both the hosts. Among the samples, only 6.8% isolates tested positive for methicillin resistance. The biofilm formation quantified and the variation compared among the host. A Welch two-sample t -test found to be statistically significant, t=2.3179, df=28.103, and p=0.02795. Chicken embryo model found effective to test the pathogenicity of the strains. The study helped to conclude healthy bovines can act as S. aureus reservoirs. Bovine origin S. aureus strains are more virulent than ovine origin strains. Bovine origin strains have high probability to become zoonotic pathogen. Further, gene knock out studies may be conducted to conclude zoonocity of the bovine origin strains.

WORD ORIGIN HELPS EXPAND LEARNERS’ VOCABULARY A VOCABULARY TEACHING APPROACH

Directory of Open Access Journals (Sweden)

Li Jing

2012-12-01

Full Text Available Word origin (motivation deals with the connection between name and sense, explaining how a word originated. With the knowledge of how words are originated, learners can grasp a word easier and thus expand their vocabulary more quickly. The introduction to word origin (motivation by teachers can also help the learners gain interest in the process of learning and learn more about the cultural and historical background of the English-speaking countries. This paper tries to clarify this method of teaching from four aspects: onomatopoeia, word formation, cultural and historical background and cognitive linguistics.

The Unified Problem-Solving Method Development Language UPML

OpenAIRE

Fensel, Dieter; Motta, Enrico; van Harmelen, Frank; Benjamins, V. Richard; Crubezy, Monica; Decker, Stefan; Gaspari, Mauro; Groenboom, Rix; Grosso, William; Musen, Mark; Plaza, Enric; Schreiber, Guus; Studer, Rudi; Wielinga, Bob

2003-01-01

Problem-solving methods provide reusable architectures and components for implementing the reasoning part of knowledge-based systems. The UNIFIED PROBLEM-SOLVING METHOD DESCRIPTION LANGUAGE (UPML) has been developed to describe and implement such architectures and components to facilitate their semi-automatic reuse and adaptation. In a nutshell, UPML is a framework for developing knowledge-intensive reasoning systems based on libraries ofg eneric problem-solving components. The paper describe...

Reconsidering the origins of the Southern African regionalism thirty years later: towards a constructivist approach to the origins of SADC

Directory of Open Access Journals (Sweden)

José Abel Moma

2012-01-01

Full Text Available The creation of SADCC has generated a debate over the real origins of the southern African model of regionalism. This paper develops the idea that the origins of SADC are both internal and external. Thus, southern African regionalism is understood as a constructivist articulation of internal and external inputs, which determined the creation of SADCC and its transformation into SADC.

Origin discrimination and quality evaluation of Gastrodiae rhizoma ...

African Journals Online (AJOL)

quality control and origin discrimination of Gastrodiae rhizoma. Methods: Twelve .... Similarity. Evaluation. System for. Chromatographic Fingerprint of Traditional. Chinese Medicine ..... chromatography with tandem quadrupole time-of-flight.

Acceleration of the AFEN method by two-node nonlinear iteration

Energy Technology Data Exchange (ETDEWEB)

Moon, Kap Suk; Cho, Nam Zin; Noh, Jae Man; Hong, Ser Gi [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-12-31

A nonlinear iterative scheme developed to reduce the computing time of the AFEN method was tested and applied to two benchmark problems. The new nonlinear method for the AFEN method is based on solving two-node problems and use of two nonlinear correction factors at every interface instead of one factor in the conventional scheme. The use of two correction factors provides higher-order accurate interface fluxes as well as currents which are used as the boundary conditions of the two-node problem. The numerical results show that this new method gives exactly the same solution as that of the original AFEN method and the computing time is significantly reduced in comparison with the original AFEN method. 7 refs., 1 fig., 1 tab. (Author)

Acceleration of the AFEN method by two-node nonlinear iteration

Energy Technology Data Exchange (ETDEWEB)

Moon, Kap Suk; Cho, Nam Zin; Noh, Jae Man; Hong, Ser Gi [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

A nonlinear iterative scheme developed to reduce the computing time of the AFEN method was tested and applied to two benchmark problems. The new nonlinear method for the AFEN method is based on solving two-node problems and use of two nonlinear correction factors at every interface instead of one factor in the conventional scheme. The use of two correction factors provides higher-order accurate interface fluxes as well as currents which are used as the boundary conditions of the two-node problem. The numerical results show that this new method gives exactly the same solution as that of the original AFEN method and the computing time is significantly reduced in comparison with the original AFEN method. 7 refs., 1 fig., 1 tab. (Author)

Calculus domains modelled using an original bool algebra based on polygons

Science.gov (United States)

Oanta, E.; Panait, C.; Raicu, A.; Barhalescu, M.; Axinte, T.

2016-08-01

Analytical and numerical computer based models require analytical definitions of the calculus domains. The paper presents a method to model a calculus domain based on a bool algebra which uses solid and hollow polygons. The general calculus relations of the geometrical characteristics that are widely used in mechanical engineering are tested using several shapes of the calculus domain in order to draw conclusions regarding the most effective methods to discretize the domain. The paper also tests the results of several CAD commercial software applications which are able to compute the geometrical characteristics, being drawn interesting conclusions. The tests were also targeting the accuracy of the results vs. the number of nodes on the curved boundary of the cross section. The study required the development of an original software consisting of more than 1700 computer code lines. In comparison with other calculus methods, the discretization using convex polygons is a simpler approach. Moreover, this method doesn't lead to large numbers as the spline approximation did, in that case being required special software packages in order to offer multiple, arbitrary precision. The knowledge resulted from this study may be used to develop complex computer based models in engineering.

Evaluation index system of steel industry sustainable development based on entropy method and topsis method

Science.gov (United States)

Ronglian, Yuan; Mingye, Ai; Qiaona, Jia; Yuxuan, Liu

2018-03-01

Sustainable development is the only way for the development of human society. As an important part of the national economy, the steel industry is an energy-intensive industry and needs to go further for sustainable development. In this paper, we use entropy method and Topsis method to evaluate the development of China’s steel industry during the “12th Five-Year Plan” from four aspects: resource utilization efficiency, main energy and material consumption, pollution status and resource reuse rate. And we also put forward some suggestions for the development of China’s steel industry.

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel; Tekinerdogan, B.; van den Broek, P.M.; Saeki, M.; Hruby, P.; Sunye, G.

2001-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Frohner, A´ kos; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel

2002-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

Influence of Three Different Methods of Teaching Physics on the Gain in Students' Development of Reasoning

Science.gov (United States)

Marušić, Mirko; Sliško, Josip

2012-01-01

The Lawson Classroom Test of Scientific Reasoning (LCTSR) was used to gauge the relative effectiveness of three different methods of pedagogy, Reading, Presenting, and Questioning (RPQ), Experimenting and Discussion (ED), and Traditional Methods (TM), on increasing students' level of scientific thinking. The data of a one-semester-long senior high-school project indicate that, for the LCTSR: (a) the RPQ group (n = 91) achieved effect-sizes d = 0.30 and (b) the ED group (n  =  85) attained effect-sizes d = 0.64. These methods have shown that the Piagetian and Vygotskian visions on learning and teaching can go hand in hand and as such achieve respectable results. To do so, it is important to challenge the students and thus encourage the shift towards higher levels of reasoning. This aim is facilitated through class management which recognizes the importance of collaborative learning. Carrying out Vygotsky's original intention to use teaching to promote cognitive development as well as subject concepts, this research has shown that it is better to have students experience cognitive conflict from directly observed experiments than by reflecting on reported experience from popularization papers or writings found on the internet.

Using inertial measurement units originally developed for biomechanics for modal testing of civil engineering structures

Science.gov (United States)

Hester, David; Brownjohn, James; Bocian, Mateusz; Xu, Yan; Quattrone, Antonino

2018-05-01

This paper explores the use of wireless Inertial Measurement Units (IMU) originally developed for bio-mechanical research applications for modal testing of civil engineering infrastructure. Due to their biomechanics origin, these devices combine a triaxial accelerometer with gyroscopes and magnetometers for orientation, as well as on board data logging capability and wireless communication for optional data streaming and to coordinate synchronisation with other IMUs in a network. The motivation for application to civil structures is that their capabilities and simple operating procedures make them suitable for modal testing of many types of civil infrastructure of limited dimension including footbridges and floors while also enabling recovering of dynamic forces generated and applied to structures by moving humans. To explore their capabilities in civil applications, the IMUs are evaluated through modal tests on three different structures with increasing challenge of spatial and environmental complexity. These are, a full-scale floor mock-up in a laboratory, a short span road bridge and a seven story office tower. For each case, the results from the IMUs are compared with those from a conventional wired system to identify the limitations. The main conclusion is that the relatively high noise floor and limited communication range will not be a serious limitation in the great majority of typical civil modal test applications where convenient operation is a significant advantage over conventional wired systems.

The Developmental Origins of Health and Disease and Sustainable Development Goals: mapping the way forward.

Science.gov (United States)

Kajee, N; Sobngwi, E; Macnab, A; Daar, A S

2018-02-01

In this paper, meant to stimulate debate, we argue that there is considerable benefit in approaching together the implementation of two seemingly separate recent developments. First, on the global development agenda, we have the United Nations General Assembly's 2015 finalized list of 17 Sustainable Development Goals (SDGs). Several of the SDGs are related to health. Second, the field of Developmental Origins of Health and Disease (DOHaD) has garnered enough compelling evidence demonstrating that early exposures in life affect not only future health, but that the effects of that exposure can be transmitted across generations - necessitating that we begin to focus on prevention. We argue that implementing the SDGs and DOHaD together will be beneficial in several ways; and will require attending to multiple, complex and multidisciplinary approaches as we reach the point of translating science to policy to impact. Here, we begin by providing the context for our work and making the case for a mutually reinforcing, synergistic approach to implementing SDGs and DOHaD, particularly in Africa. To do this, we initiate discussion via an early mapping of some of the overlapping considerations between SDGs and DOHaD.

Are the Ukwuanis Benin or Igbo? a study of origin and migration ...

African Journals Online (AJOL)

This method is most appropriate for this work because it offered the opportunity to interrogate the traditions of origins of the different Ukwuani clans. The findings indicate that Ukwuani people are Igbo in origin, and the claim of origin from Benin which textbook generalizations tended to portray is a recent contraption made ...

Borges, o original da tradução.

Directory of Open Access Journals (Sweden)

Walter Carlos Costa

2005-01-01

Full Text Available Translation seems to play a more important role in the development of culture than is generally supposed. Jorge Luis Borges is one writer who understood this phenomenon particularly well and in his writings translation gains in dignity. In a very original way, Borges considers the corpus of translated texts not inferior but even superior, to their prestigious originals, as it happens with the many versions of the Odyssey in English. Translation is also central to Borges’s poetics, where rereading and rewriting are essential. Keywords: Borges, translation, original, rereading, rewriting.

An exploratory survey of methods used to develop measures of performance

Science.gov (United States)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

NASA's Physics of the Cosmos and Cosmic Origins programs manage Strategic Astrophysics Technology (SAT) development

Science.gov (United States)

Pham, Thai; Thronson, Harley; Seery, Bernard; Ganel, Opher

2016-07-01

The strategic astrophysics missions of the coming decades will help answer the questions "How did our universe begin and evolve?" "How did galaxies, stars, and planets come to be?" and "Are we alone?" Enabling these missions requires advances in key technologies far beyond the current state of the art. NASA's Physics of the Cosmos2 (PCOS), Cosmic Origins3 (COR), and Exoplanet Exploration Program4 (ExEP) Program Offices manage technology maturation projects funded through the Strategic Astrophysics Technology (SAT) program to accomplish such advances. The PCOS and COR Program Offices, residing at the NASA Goddard Space Flight Center (GSFC), were established in 2011, and serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the Programs' technology development activities and the current technology investment portfolio of 23 technology advancements. We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The Programs' priorities are driven by strategic direction from the Astrophysics Division, which is informed by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) 2010 Decadal Survey report [1], the Astrophysics Implementation Plan (AIP) [2] as updated, and the Astrophysics Roadmap "Enduring Quests, Daring Visions" [3]. These priorities include technology development for missions to study dark energy, gravitational waves, X-ray and inflation probe science, and large far-infrared (IR) and ultraviolet (UV)/optical/IR telescopes to conduct imaging and spectroscopy studies. The SAT program is the

Application of enzyme multibiosensor for toxicity analysis of real water samples of different origin

Directory of Open Access Journals (Sweden)

Soldatkin A. P.

2009-06-01

Full Text Available Aim. The analysis of toxicity of different water samples with the multibiosensor developed earlier. Methods. The potentiometric multibiosensor with several immobilized enzymes as bioselective elements and the matrix of pH-sensitive field effect transistors as transducers of the biochemical signal into the electric one was applied for the analysis. Results. The bioselective elements of the multibiosensor were developed using acetylcholinesterase, butyryl- cholinesterase, urease, glucose oxidase, and three-enzyme system (invertase, mutarotase, glucose oxidase. The measurement of toxic compounds in water samples of different origin was performed using the constructed sensor. The results obtained were compared with those obtained by the conventional methods of toxic agent’s analysis (atomic absorption spectrometry, thin-film chroma- tography, and atomic absorbic analyser of mercury. Conclusion. A strong conformity between the results obtained with the multibiosensor and traditional methods has been shown.

The characterization of insoluble dissolver residues and the development of treatment methods

International Nuclear Information System (INIS)

Baker, H.T.; Brown, P.E.; Pateman, R.J.; Wilkinson, K.L.

1986-01-01

Characterization studies have been carried out on the insoluble residue arising from laboratory scale dissolution of single pins of mixed oxide fuel irradiated in the Dounreay Fast Reactor (DFR). Similar characterization work has also been completed on six samples of insoluble residue recovered from the reprocessing of complete sub-assemblies of mixed oxide fuel irradiated in PFR. Treatment methods for the dissolver insolubles have consisted of preparing immobilized samples in sand/ordinary portland cement (OPC), sand/pulverized fly ash (PFA)/OPC, and blast furnace slag (BFS)/OPC. A programme of leach testing has been carried out according to the conditions laid down in the international Standard Organization Test. Four samples of DFR originated insoluble residues and six samples of PFR originated insoluble residues have been immobilized and leach tested. Variations have included experiments to evaluate the leach rate under temperature influence and to acid wash prior to immobilization

Measuring Health Information Dissemination and Identifying Target Interest Communities on Twitter: Methods Development and Case Study of the @SafetyMD Network.

Science.gov (United States)

Kandadai, Venk; Yang, Haodong; Jiang, Ling; Yang, Christopher C; Fleisher, Linda; Winston, Flaura Koplin

2016-05-05

Little is known about the ability of individual stakeholder groups to achieve health information dissemination goals through Twitter. This study aimed to develop and apply methods for the systematic evaluation and optimization of health information dissemination by stakeholders through Twitter. Tweet content from 1790 followers of @SafetyMD (July-November 2012) was examined. User emphasis, a new indicator of Twitter information dissemination, was defined and applied to retweets across two levels of retweeters originating from @SafetyMD. User interest clusters were identified based on principal component analysis (PCA) and hierarchical cluster analysis (HCA) of a random sample of 170 followers. User emphasis of keywords remained across levels but decreased by 9.5 percentage points. PCA and HCA identified 12 statistically unique clusters of followers within the @SafetyMD Twitter network. This study is one of the first to develop methods for use by stakeholders to evaluate and optimize their use of Twitter to disseminate health information. Our new methods provide preliminary evidence that individual stakeholders can evaluate the effectiveness of health information dissemination and create content-specific clusters for more specific targeted messaging.

The origin of the lower fourth molar in canids, inferred by individual variation

Directory of Open Access Journals (Sweden)

Masakazu Asahara

2016-11-01

Full Text Available Background An increase in tooth number is an exception during mammalian evolution. The acquisition of the lower fourth molar in the bat-eared fox (Otocyon megalotis, Canidae, Carnivora, Mammalia is one example; however, its developmental origin is not clear. In some canids (Canidae, individual variation exist as supernumerary molar M4. This study focuses on the acquisition of the lower fourth molar in canids and proposes that the inhibitory cascade model can explain its origin. Methods Occlusal view projected area of lower molars was determined from 740 mandibles obtained from Canis latrans, Nyctereutes procyonoides, and Urocyon cinereoargenteus museum specimens. For each molar, relative sizes of molars (M2/M1 and M3/M1 scores affected by inhibition/activation dynamics during development, were compared between individuals with and without supernumerary molar (M4. Results Possession of a supernumerary molar was associated with significantly larger M2/M1 score in Canis latrans, M3/M1 score in Nyctereutes procyonoides, and M2/M1 and M3/M1 scores in Urocyon cinereoargenteus compared to individuals of these species that lacked supernumerary molars. Discussion We propose that, in canids, the supernumerary fourth molar is attributable to reduced inhibition and greater activation during molar development. In the bat-eared fox, altered inhibition and activation dynamics of dental development during omnivorous-insectivorous adaptation may be a contributing factor in the origin of the lower fourth molar.

Critical comparison between equation of motion-Green's function methods and configuration interaction methods: analysis of methods and applications

International Nuclear Information System (INIS)

Freed, K.F.; Herman, M.F.; Yeager, D.L.

1980-01-01

A description is provided of the common conceptual origins of many-body equations of motion and Green's function methods in Liouville operator formulations of the quantum mechanics of atomic and molecular electronic structure. Numerical evidence is provided to show the inadequacies of the traditional strictly perturbative approaches to these methods. Nonperturbative methods are introduced by analogy with techniques developed for handling large configuration interaction calculations and by evaluating individual matrix elements to higher accuracy. The important role of higher excitations is exhibited by the numerical calculations, and explicit comparisons are made between converged equations of motion and configuration interaction calculations for systems where a fundamental theorem requires the equality of the energy differences produced by these different approaches. (Auth.)

A GPU-accelerated implicit meshless method for compressible flows

Science.gov (United States)

Zhang, Jia-Le; Ma, Zhi-Hua; Chen, Hong-Quan; Cao, Cheng

2018-05-01

This paper develops a recently proposed GPU based two-dimensional explicit meshless method (Ma et al., 2014) by devising and implementing an efficient parallel LU-SGS implicit algorithm to further improve the computational efficiency. The capability of the original 2D meshless code is extended to deal with 3D complex compressible flow problems. To resolve the inherent data dependency of the standard LU-SGS method, which causes thread-racing conditions destabilizing numerical computation, a generic rainbow coloring method is presented and applied to organize the computational points into different groups by painting neighboring points with different colors. The original LU-SGS method is modified and parallelized accordingly to perform calculations in a color-by-color manner. The CUDA Fortran programming model is employed to develop the key kernel functions to apply boundary conditions, calculate time steps, evaluate residuals as well as advance and update the solution in the temporal space. A series of two- and three-dimensional test cases including compressible flows over single- and multi-element airfoils and a M6 wing are carried out to verify the developed code. The obtained solutions agree well with experimental data and other computational results reported in the literature. Detailed analysis on the performance of the developed code reveals that the developed CPU based implicit meshless method is at least four to eight times faster than its explicit counterpart. The computational efficiency of the implicit method could be further improved by ten to fifteen times on the GPU.

Country of origin effect on luxury brands evaluation: an experimental study

Directory of Open Access Journals (Sweden)

Andrea Kassouf Pizzinatto

2014-08-01

Full Text Available This study investigates the country of origin effect in luxury brands evaluation, theory that concerns the stereotype developed in the mind of consumers from a negative or positive image of the country where the product was manufactured, influencing product brand evaluation image. The methodological process was conducted with experiments, involving manipulation of variables thought printed advertisings, stimulus, as developed especially for the research, in three different situations: first the negative country of origin effect (with bad manufacture quality stereotyped image; second the positive country of origin effect (with good manufacture quality stereotyped image; e a third without any mention of the country of origin. Data were collected through printed questionnaires, answered by 330 people. Results indicated that luxury brand evaluation is not affected by positive country of origin stimulus, but it can influence positively the non luxury brands. The negative country of origin affects both, luxury and non luxury brands, however the effect is superior in non luxury brands. In the stimulus without mention regarding the country of origin, the brand luxury evaluation was not highly affected. However it improved the evaluation of non luxury brands, when compared with the negative country of origin stimulus.

Quality of Original and Biosimilar Epoetin Products

NARCIS (Netherlands)

Brinks, V.|info:eu-repo/dai/nl/31395979X; Hawe, A.; Basmeleh, A.H.H.|info:eu-repo/dai/nl/337907331; Joachin-Rodriguez, L.; Haselberg, R.|info:eu-repo/dai/nl/304822647; Somsen, G.W.|info:eu-repo/dai/nl/117149357; Jiskoot, W.|info:eu-repo/dai/nl/084557397; Schellekens, H.|info:eu-repo/dai/nl/068406762

2011-01-01

Purpose: To compare the quality of therapeutic erythropoietin (EPO) products, including two biosimilars, with respect to content, aggregation, isoform profile and potency. Methods: Two original products, Eprex (epoetin alfa) and Dynepo (epoetin delta), and two biosimilar products, Binocrit (epoetin

INVESTIGATION OF METHODS OF DNA EXTRACTION FROM PLANT ORIGIN OBJECTS AND FOODS BASED ON THEM

Directory of Open Access Journals (Sweden)

L. S. Dyshlyuk

2014-01-01

Full Text Available For the last decades modern and highly efficient methods of determining the quality and safety of food products, based on the application of the latest scientific achievements were developed in the world. A special place is given to the methods based on achievements of molecular biology and genetics. At the present stage of development in the field of assessing the quality of raw materials and processed food products much attention is given to highly accurate, sensitive and specific research methods, the method of polymerase chain reaction (PCR occupying a leading place among them. PCR is a sophisticated method that simulates the natural DNA replication and allows to detect a single specific DNA molecule in the presence of millions of other molecules. The key point in the preparation of material for PCR is the extraction of nucleic acids. The low content of DNA in plant material and the high concentration of secondary metabolites complicate the process of extraction. The key solution to this problem is highly effective method of extraction, which allows to obtain the DNA of adequate quality and purity. Comparative analysis of methods for the extraction of nucleic acids from fruit raw materials and products based on them was carried out in the study. General analysis of the experimental data allowed us to determine the most efficient method for DNA extracting. In the comparative analysis it was found out that to extract DNA from plant raw materials and food products prepared on their basis it is the most suitable to use "Sorb-GMO-A" reactants kit (set. The approach described gives us a brilliant opportunity to obtain deoxyribonucleic acid proper quality and purity.

Development of Reverse-Phase HPLC Method for Simultaneous ...

African Journals Online (AJOL)

Erah

Purpose: To develop a simple, sensitive and rapid reverse phase HPLC method for the simultaneous analysis of metoprolol succinate and hydrochlorothiazide in a solid dosage form. Methods: The .... Extraction was carried out three times with.

Honeydew Honeys: A Review on the Characterization and Authentication of Botanical and Geographical Origins.

Science.gov (United States)

Pita-Calvo, Consuelo; Vázquez, Manuel

2018-03-21

The commercial interest in honeydew honeys (from the secretions of plants or the excretions of plant-sucking insects found on plants) is increasing because of their higher therapeutic properties compared with those of most blossom honeys (from nectar). However, honeydew honeys have been less studied than blossom honeys. In this work, studies carried out to characterize and authenticate honeydew honeys by their botanical and geographical origins have been reviewed. The identification of honey origins has been approached by two ways: by the analysis of chemical markers and by the development of analytical methodologies combined with multivariate analyses. Some compounds have been suggested as specific botanical markers of several honeydew honeys, such as quercitol and trans-oak lactone for oak honey, 2-aminoacetophenone and propylanisol for holm oak honey, and 1-chloro-octane and tridecane for pine honey. The presence of 3-carene and an unidentified compound in samples was proposed as a way discriminate between Greek and Turkish pine honeys. Chemometric analyses have been applied on chemical compositions and on physicochemical, microscopic, and spectral parameters and have proved to be valuable methods for authenticating honeydew honeys. Analytical methods based on spectral information are suitable for the routine control of honeydew-honey origins because they are fast and require easy sample preparations.

Quench origins

International Nuclear Information System (INIS)

Devred, A.

1990-03-01

In this paper, I shall discuss the quench origins. I shall first establish a method of classification and introduce the notions of conductor-limited and energy-deposited quenches. Next the paper will be devoted to the study of conductor-limited quenches, and I shall introduce the notions of plateau and of fraction of short sample. Also the paper will be devoted to the study of energy-deposited quenches, and I shall introduce the notions of training and of minimum energy deposit; I shall then review the possible causes of energy release. Lastly, I shall introduce the notion of operating margin, and I shall indicate how to optimize the operating margin in order to limit the risk of premature quenching. 112 refs., 14 figs

Development of Early Warning Methods for Electric Power Systems

DEFF Research Database (Denmark)

Jóhannsson, Hjörtur

This thesis concerns the development of methods that can provide, in realtime, an early warning for an emerging blackout in electric power systems. The blackout in E-Denmark and S-Sweden on September 23, 2003 is the main motivation for the method development. The blackout was caused by occurrence...

Multiresidue screening method for detection of benzimidazoles and their metabolites in liver and muscle by high-performance liquid chromatography: method development and validation according to Commission Decision 2002/657/EC

Directory of Open Access Journals (Sweden)

Marilena Gili

2014-02-01

Full Text Available The use of veterinary drugs may cause the presence of residues in food of animal origin if appropriate withdrawal periods are not respected. A high-performance liquid chromatography (HPLC method has been developed for the simultaneous detection of 11 benzimidazole residues, including metabolites – albendazole, albendazole sulphoxide, albendazole sulphone, fenbendazole, fenbendazole sulphoxide (oxfendazole, fenbendazole sulphone, flubendazole, mebendazole, oxibendazole, thiabendazole, 5-hydroxythiabendazole – in bovine, ovine, equine, swine, rabbit and poultry liver and in bovine, swine and fish muscle. After extraction with a dicloromethane/acetonitrile solution (35/65 v/v containing 5% ammonium hydroxide, the solvent was evaporated to dryness, the residue was dissolved in HCl 0.1 M, defatted with hexane, purified on a strong cation exchange solid-phase extraction cartridge and analysed in HPLC with diode array and fluorescence detectors. The method was validated as screening qualitative method evaluating, according to Commission Decision 2002/657/EC criteria, specificity, CCb and b error at cut off level of 25 mg/kg and ruggedness.

A rule-based reference resolution method for Dutch discourse

NARCIS (Netherlands)

Harabagiu, S.; op den Akker, Hendrikus J.A.; Hospers, M.A.; Ferrandez, A.; Kroezen, Erna; Nijholt, Antinus; Lie, Danny

2002-01-01

This paper presents a knowledge-poor method for the solution of anaphoric and deictic expressions in Dutch texts. The method is developed for use in a text summarization system. Anaphora resolution plays an important role in the analysis of the original text as well as in the generation of the text

Country-of-origin Effects on Consumer Brand Perception of Familiar vs. Unfamiliar Brands of Technological Complex Products in a Developed Market Setting

DEFF Research Database (Denmark)

Sørensen, Jeanne; Iacob, Andreea

2016-01-01

The purpose of this paper is to extend the knowledge of the effect of brand familiarity on how Country of Origin influences brand perception in a developed country. We used a 2x2 factorial experimental design to test the effects of COO with two levels of sourcing location – Czech Republic...... usable questionnaires. We used ANOVA to test our hypotheses. The findings suggest that country of origin has a significant positive impact on the consumers’ perception of the Czech manufactured Skoda Fabia, representing the familiar brand, and a significant negative impact on the consumers’ perception...

Origins of Phosphorus and Nitrogen in the Seto Inland Sea, Japan

OpenAIRE

Yanagi, Tetsuo; Tanaka, Tsuyoshi; 柳, 哲雄; 田中, 剛

2013-01-01

Origins of total phosphorus (TP) and total nitrogen (TN) were investigated in the Seto Inland Sea, Japan, using the unit response function method. About 58 % of TP and TN in the Seto Inland Sea were found to have originated from the open ocean, 9 % of TP and 14 % of TN originate from rivers, 33 % of TP and 29 % of TN originate from bottom sediments. We consequently suggest that it would be very difficult to prevent the occurrence of red tides and oxygen deficient water masses in the Seto Inla...

Reflective Practice: Origins and Interpretations

Science.gov (United States)

Reynolds, Michael

2011-01-01

The idea of reflection is central to the theory and practice of learning--especially learning which is grounded in past or current experience. This paper proposes a working definition of reflection and reviews its origins and recent developments. The author also provides an account of "critical reflection", including its rationale and…

REAL-TIME PCR DETECTION OF LISTERIA MONOCYTOGENES IN FOOD SAMPLES OF ANIMAL ORIGIN

Directory of Open Access Journals (Sweden)

Jaroslav Pochop

2013-02-01

Full Text Available The aim of this study was to follow the contamination of food with Listeria monocytogenes by using Step One real time polymerase chain reaction (PCR. We used the PrepSEQ Rapid Spin Sample Preparation Kit for isolation of DNA and SensiFAST SYBR Hi-ROX Kit for the real-time PCR performance. In 24 samples of food of animal origin without incubation were detected strains of Listeria monocytogenes in 15 samples (swabs. Nine samples were negative. Our results indicated that the real-time PCR assay developed in this study could sensitively detect Listeria monocytogenes in food of animal origin without incubation. This could prevent infection caused by Listeria monocytogenes, and also could benefit food manufacturing companies by extending their product’s shelf-life as well as saving the cost of warehousing their food products while awaiting pathogen testing results. The rapid real-time PCR-based method performed very well compared to the conventional method. It is a fast, simple, specific and sensitive way to detect nucleic acids, which could be used in clinical diagnostic tests in the future.

Listeria monocytogenes Identification in Food of Animal Origin Used with Real Time PCR

Directory of Open Access Journals (Sweden)

Jaroslav Pochop

2013-10-01

Full Text Available The aim of this study was to follow the contamination of food with Listeria monocytogenes by using Step One real time polymerase chain reaction (RT PCR. We used the PrepSEQ Rapid Spin Sample Preparation Kit for isolation of DNA and SensiFAST SYBR Hi-ROX Kit for the real-time PCR performance. In 20 samples of food of animal origin with incubation were detected strains of Listeria monocytogenes in 9 samples (swabs. Eleven samples were negative. Our results indicated that the real-time PCR assay developed in this study could sensitively detect Listeria monocytogenes in food of animal origin without incubation. This could prevent infection caused by Listeria monocytogenes, and also could benefit food manufacturing companies by extending their product’s shelf-life as well as saving the cost of warehousing their food products while awaiting pathogen testing results. The rapid real-time PCR-based method performed very well compared to the conventional method. It is a fast, simple, specific and sensitive way to detect nucleic acids, which could be used in clinical diagnostic tests in the future.

New method developments and rationalization of tools for LMFBR design in the frame of the European collaboration

International Nuclear Information System (INIS)

Palmiotti, G.; Burstall, R.F.; Kiefhaber, E.; Gebhardt, W.; Rieunier, J.M.

1991-01-01

The collaboration in Western Europe on fast reactor works has been active for more than two decades. The present collaboration on the research and development was initiated by the inter-government memorandum of understanding in January, 1984, and the research and development agreement was formally signed in January, 1989. The agreement originally involved the governments of France, the FRG, the U.K., Italy, Belgium and the Netherlands, though the latter three have since withdrawn. The works of the research and development collaboration is controlled by the steering committee with a permanent secretariat, and the technical works are overseen by 11 committees, the AGTs, each related to a specific topic. AGT3 is related to plant performance. The objective of the works is to provide for those performing design calculation with the calculating method and the data, and to recommend bias factors where necessary. It was agreed to use only one scheme for future works by all the partners. ERANOS functionalities, software and quality assurance aspects and so on are described. (K.I.)

Development of 3-D FBR heterogeneous core calculation method based on characteristics method

International Nuclear Information System (INIS)

Takeda, Toshikazu; Maruyama, Manabu; Hamada, Yuzuru; Nishi, Hiroshi; Ishibashi, Junichi; Kitano, Akihiro

2002-01-01

A new 3-D transport calculation method taking into account the heterogeneity of fuel assemblies has been developed by combining the characteristics method and the nodal transport method. In the axial direction the nodal transport method is applied, and the characteristics method is applied to take into account the radial heterogeneity of fuel assemblies. The numerical calculations have been performed to verify 2-D radial calculations of FBR assemblies and partial core calculations. Results are compared with the reference Monte-Carlo calculations. A good agreement has been achieved. It is shown that the present method has an advantage in calculating reaction rates in a small region

Generating and testing methods for consumer-oriented product development

International Nuclear Information System (INIS)

2001-10-01

In order to obtain a good insight into various design methods that can be used by product developers to enable them to develop and test useful domotics products (domotics: intelligent systems for the home), an inventory has been made of the methods used in the Netherlands. The inventory is directed at two categories of methods: (1) Methods of getting better acquainted with the user and/or the problem, and of generating novel solutions: generative methods; and (2) Methods of assessing solutions (through various phases of the designing process): testing methods. The first category of methods concentrates on the designing process. In other words: how can the designer realise as much as possible of the workability of (domotics) products during the designing process? The second category aims at testing a design (in whatever shape: drawing, prototype, functional computer animation, etc.) through its users. These are methods of assessing a design at various stages of the designing process [nl

Development of advanced MCR task analysis methods

International Nuclear Information System (INIS)

Na, J. C.; Park, J. H.; Lee, S. K.; Kim, J. K.; Kim, E. S.; Cho, S. B.; Kang, J. S.

2008-07-01

This report describes task analysis methodology for advanced HSI designs. Task analyses was performed by using procedure-based hierarchical task analysis and task decomposition methods. The results from the task analysis were recorded in a database. Using the TA results, we developed static prototype of advanced HSI and human factors engineering verification and validation methods for an evaluation of the prototype. In addition to the procedure-based task analysis methods, workload estimation based on the analysis of task performance time and analyses for the design of information structure and interaction structures will be necessary

The Influence of the Country of Origin Image on Brand Equity: A Study of Spanish Banks

Directory of Open Access Journals (Sweden)

Michel Alves Prado

2015-09-01

Full Text Available As there are few studies on the influence of the country of origin image on brand equity for services companies (as it is the case of financial institutions, the aim of this paper is to analyze the influence of the country of origin image on the brand equity of Spanish banks. A descriptive and quantitative research was employed, using the survey method to verify the hypothesis that the country of origin image (Spain positively influences the brand equity of Spanish banks. The main statistical analyzes were the  factor analysis and the multiple regression analysis. As a result, it was found that the Attitude dimension underlying the variable Brand equity of Spanish banks suffered more influence than the Awareness dimension. Furthermore, it was found that the country of origin image positively influences the brand equity of Spanish banks. The technical aspects, in general, influence more than friendly aspects, thus implying a direction for the Spain brand development strategy focused on these aspects. Limitations of this study include the use of a non-probability sample and the use of Spanish banks as the object of study. We suggest the development of new works in the services area, in different categories and with different countries of origin, in order to provide further discussion and theoretical basis for future studies and strategic actions, aiming to create and improve the image of countries.

Origins, transformations and key foci in instrumental genesis

DEFF Research Database (Denmark)

Tamborg, Andreas Lindenskov

This paper investigates the origins of the instrumental genesis and instrumental orchestrations frameworks. This is done by reviewing instrumented activity situations, instrumental genesis, and instrumental orchestrations with the purpose of identifying their epistemological assumptions, what the...... and instrumental orchestrations have potential shortcomings since the technologies that currently exist in school contexts are rather different from the technologies instrumental genesis was originally developed to study.......This paper investigates the origins of the instrumental genesis and instrumental orchestrations frameworks. This is done by reviewing instrumented activity situations, instrumental genesis, and instrumental orchestrations with the purpose of identifying their epistemological assumptions, what...

Feature-Free Activity Classification of Inertial Sensor Data With Machine Vision Techniques: Method, Development, and Evaluation.

Science.gov (United States)

Dominguez Veiga, Jose Juan; O'Reilly, Martin; Whelan, Darragh; Caulfield, Brian; Ward, Tomas E

2017-08-04

Inertial sensors are one of the most commonly used sources of data for human activity recognition (HAR) and exercise detection (ED) tasks. The time series produced by these sensors are generally analyzed through numerical methods. Machine learning techniques such as random forests or support vector machines are popular in this field for classification efforts, but they need to be supported through the isolation of a potentially large number of additionally crafted features derived from the raw data. This feature preprocessing step can involve nontrivial digital signal processing (DSP) techniques. However, in many cases, the researchers interested in this type of activity recognition problems do not possess the necessary technical background for this feature-set development. The study aimed to present a novel application of established machine vision methods to provide interested researchers with an easier entry path into the HAR and ED fields. This can be achieved by removing the need for deep DSP skills through the use of transfer learning. This can be done by using a pretrained convolutional neural network (CNN) developed for machine vision purposes for exercise classification effort. The new method should simply require researchers to generate plots of the signals that they would like to build classifiers with, store them as images, and then place them in folders according to their training label before retraining the network. We applied a CNN, an established machine vision technique, to the task of ED. Tensorflow, a high-level framework for machine learning, was used to facilitate infrastructure needs. Simple time series plots generated directly from accelerometer and gyroscope signals are used to retrain an openly available neural network (Inception), originally developed for machine vision tasks. Data from 82 healthy volunteers, performing 5 different exercises while wearing a lumbar-worn inertial measurement unit (IMU), was collected. The ability of the

Development of Uav Photogrammetry Method by Using Small Number of Vertical Images

Science.gov (United States)

Kunii, Y.

2018-05-01

This new and efficient photogrammetric method for unmanned aerial vehicles (UAVs) requires only a few images taken in the vertical direction at different altitudes. The method includes an original relative orientation procedure which can be applied to images captured along the vertical direction. The final orientation determines the absolute orientation for every parameter and is used for calculating the 3D coordinates of every measurement point. The measurement accuracy was checked at the UAV test site of the Japan Society for Photogrammetry and Remote Sensing. Five vertical images were taken at 70 to 90 m altitude. The 3D coordinates of the measurement points were calculated. The plane and height accuracies were ±0.093 m and ±0.166 m, respectively. These values are of higher accuracy than the results of the traditional photogrammetric method. The proposed method can measure 3D positions efficiently and would be a useful tool for construction and disaster sites and for other field surveying purposes.

Development Optimization and Uncertainty Analysis Methods for Oil and Gas Reservoirs

Energy Technology Data Exchange (ETDEWEB)

Ettehadtavakkol, Amin, E-mail: amin.ettehadtavakkol@ttu.edu [Texas Tech University (United States); Jablonowski, Christopher [Shell Exploration and Production Company (United States); Lake, Larry [University of Texas at Austin (United States)

2017-04-15

Uncertainty complicates the development optimization of oil and gas exploration and production projects, but methods have been devised to analyze uncertainty and its impact on optimal decision-making. This paper compares two methods for development optimization and uncertainty analysis: Monte Carlo (MC) simulation and stochastic programming. Two example problems for a gas field development and an oilfield development are solved and discussed to elaborate the advantages and disadvantages of each method. Development optimization involves decisions regarding the configuration of initial capital investment and subsequent operational decisions. Uncertainty analysis involves the quantification of the impact of uncertain parameters on the optimum design concept. The gas field development problem is designed to highlight the differences in the implementation of the two methods and to show that both methods yield the exact same optimum design. The results show that both MC optimization and stochastic programming provide unique benefits, and that the choice of method depends on the goal of the analysis. While the MC method generates more useful information, along with the optimum design configuration, the stochastic programming method is more computationally efficient in determining the optimal solution. Reservoirs comprise multiple compartments and layers with multiphase flow of oil, water, and gas. We present a workflow for development optimization under uncertainty for these reservoirs, and solve an example on the design optimization of a multicompartment, multilayer oilfield development.

Development Optimization and Uncertainty Analysis Methods for Oil and Gas Reservoirs

International Nuclear Information System (INIS)

Ettehadtavakkol, Amin; Jablonowski, Christopher; Lake, Larry

2017-01-01

Uncertainty complicates the development optimization of oil and gas exploration and production projects, but methods have been devised to analyze uncertainty and its impact on optimal decision-making. This paper compares two methods for development optimization and uncertainty analysis: Monte Carlo (MC) simulation and stochastic programming. Two example problems for a gas field development and an oilfield development are solved and discussed to elaborate the advantages and disadvantages of each method. Development optimization involves decisions regarding the configuration of initial capital investment and subsequent operational decisions. Uncertainty analysis involves the quantification of the impact of uncertain parameters on the optimum design concept. The gas field development problem is designed to highlight the differences in the implementation of the two methods and to show that both methods yield the exact same optimum design. The results show that both MC optimization and stochastic programming provide unique benefits, and that the choice of method depends on the goal of the analysis. While the MC method generates more useful information, along with the optimum design configuration, the stochastic programming method is more computationally efficient in determining the optimal solution. Reservoirs comprise multiple compartments and layers with multiphase flow of oil, water, and gas. We present a workflow for development optimization under uncertainty for these reservoirs, and solve an example on the design optimization of a multicompartment, multilayer oilfield development.

Experience on Russian military origin plutonium conversion into fast reactor nuclear fuel

International Nuclear Information System (INIS)

Grachev, A.F.; Skiba, O.V.; Bychkov, A.V.; Mayorshin, A.A.; Kisly, V.A.; Bobrov, D.A.; Osipenko, A.G.; Babikov, L.G.; Mishinev, V.B.

2001-01-01

According to the Concept of Russian Minatom on military plutonium excess utilization, the State Scientific Center of Russian Federation ''Research Institute of Atomic Reactors'' (Dimitrovgrad) has begun study on possibility of technological processing of the metal military plutonium into MOX fuel. The Program and the stages of its realization are submitted in the paper. During 1998-2000 the first stage of the Program was fulfilled and 50 kg of military origin metallic plutonium was converted to MOX fuel for the BOR-60 and BN-600 reactor. The plutonium conversion into MOX fuel is carried out under the original technology developed by SSC RIAR. It includes pyro-electrochemical process for production of fuel on the domestic equipment with the subsequent fuel pins manufacturing for the fast reactors by the vibro-packing method. The produced MOX fuel is purified from alloy additives (Ga) and corresponds to the vibro-packed fuel standard for fast reactors. The fuel pins manufacturing for BOR-60 and BN-600 reactors are carried out by the vibro-packing method on a standard procedure, which is used in SSC RIAR more than 20 years. (author)

Origins and challenges of viral dark matter.

Science.gov (United States)

Krishnamurthy, Siddharth R; Wang, David

2017-07-15

The accurate classification of viral dark matter - metagenomic sequences that originate from viruses but do not align to any reference virus sequences - is one of the major obstacles in comprehensively defining the virome. Depending on the sample, viral dark matter can make up from anywhere between 40 and 90% of sequences. This review focuses on the specific nature of dark matter as it relates to viral sequences. We identify three factors that contribute to the existence of viral dark matter: the divergence and length of virus sequences, the limitations of alignment based classification, and limited representation of viruses in reference sequence databases. We then discuss current methods that have been developed to at least partially circumvent these limitations and thereby reduce the extent of viral dark matter. Copyright © 2017 Elsevier B.V. All rights reserved.

A taxonomy of behaviour change methods: an Intervention Mapping approach

OpenAIRE

Kok, Gerjo; Gottlieb, Nell H.; Peters, Gjalt-Jorn Y.; Mullen, Patricia Dolan; Parcel, Guy S.; Ruiter, Robert A.C.; Fern?ndez, Mar?a E.; Markham, Christine; Bartholomew, L. Kay

2015-01-01

ABSTRACT In this paper, we introduce the Intervention Mapping (IM) taxonomy of behaviour change methods and its potential to be developed into a coding taxonomy. That is, although IM and its taxonomy of behaviour change methods are not in fact new, because IM was originally developed as a tool for intervention development, this potential was not immediately apparent. Second, in explaining the IM taxonomy and defining the relevant constructs, we call attention to the existence of parameters fo...

Using Item Response Theory to Develop Measures of Acquisitive and Protective Self-Monitoring From the Original Self-Monitoring Scale.

Science.gov (United States)

Wilmot, Michael P; Kostal, Jack W; Stillwell, David; Kosinski, Michal

2017-07-01

For the past 40 years, the conventional univariate model of self-monitoring has reigned as the dominant interpretative paradigm in the literature. However, recent findings associated with an alternative bivariate model challenge the conventional paradigm. In this study, item response theory is used to develop measures of the bivariate model of acquisitive and protective self-monitoring using original Self-Monitoring Scale (SMS) items, and data from two large, nonstudent samples ( Ns = 13,563 and 709). Results indicate that the new acquisitive (six-item) and protective (seven-item) self-monitoring scales are reliable, unbiased in terms of gender and age, and demonstrate theoretically consistent relations to measures of personality traits and cognitive ability. Additionally, by virtue of using original SMS items, previously collected responses can be reanalyzed in accordance with the alternative bivariate model. Recommendations for the reanalysis of archival SMS data, as well as directions for future research, are provided.

Chilean flour and wheat grain: tracing their origin using near infrared spectroscopy and chemometrics.

Science.gov (United States)

González-Martín, Ma Inmaculada; Wells Moncada, Guillermo; González-Pérez, Claudio; Zapata San Martín, Nelson; López-González, Fernando; Lobos Ortega, Iris; Hernández-Hierro, Jose-Miguel

2014-02-15

Instrumental techniques such a near-infrared spectroscopy (NIRS) are used in industry to monitor and establish product composition and quality. As occurs with other food industries, the Chilean flour industry needs simple, rapid techniques to objectively assess the origin of different products, which is often related to their quality. In this sense, NIRS has been used in combination with chemometric methods to predict the geographic origin of wheat grain and flour samples produced in different regions of Chile. Here, the spectral data obtained with NIRS were analysed using a supervised pattern recognition method, Discriminat Partial Least Squares (DPLS). The method correctly classified 76% of the wheat grain samples and between 90% and 96% of the flour samples according to their geographic origin. The results show that NIRS, together with chemometric methods, provides a rapid tool for the classification of wheat grain and flour samples according to their geographic origin. Copyright © 2013 Elsevier Ltd. All rights reserved.

Interactive visual exploration and analysis of origin-destination data

Science.gov (United States)

Ding, Linfang; Meng, Liqiu; Yang, Jian; Krisp, Jukka M.

2018-05-01

In this paper, we propose a visual analytics approach for the exploration of spatiotemporal interaction patterns of massive origin-destination data. Firstly, we visually query the movement database for data at certain time windows. Secondly, we conduct interactive clustering to allow the users to select input variables/features (e.g., origins, destinations, distance, and duration) and to adjust clustering parameters (e.g. distance threshold). The agglomerative hierarchical clustering method is applied for the multivariate clustering of the origin-destination data. Thirdly, we design a parallel coordinates plot for visualizing the precomputed clusters and for further exploration of interesting clusters. Finally, we propose a gradient line rendering technique to show the spatial and directional distribution of origin-destination clusters on a map view. We implement the visual analytics approach in a web-based interactive environment and apply it to real-world floating car data from Shanghai. The experiment results show the origin/destination hotspots and their spatial interaction patterns. They also demonstrate the effectiveness of our proposed approach.

Development and Validation of Improved Method for Fingerprint ...

African Journals Online (AJOL)

Purpose: To develop and validate an improved method by capillary zone electrophoresis with photodiode array detection for the fingerprint analysis of Ligusticum chuanxiong Hort. (Rhizoma Chuanxiong). Methods: The optimum high performance capillary electrophoresis (HPCE) conditions were 30 mM borax containing 5 ...

Origin,

Directory of Open Access Journals (Sweden)

Artur de Vargas Giorgi

2011-02-01

Full Text Available This essay tightens the “origin” concept, its manifestation through puzzles and their relationship to techniques of reproduction. Contrary to the hegemonic critique of aesthetic and cultural objects – critique that, settled on the appearance and notions of identity, tradition, canon, etc., undervalues the reproductions of "originals" –, the aim is to deliver these objects from formal hierarchization dispositives, that is, release them of what is ideal and positively imposed, so that the reproducibility is potentiated as producer of singularities, of apparitions. The effort is to keep the undecided character of puzzles (bodies, texts, images in which the origin is manifest, so that the logic of the spectacle is reverted into sense opening, instance in which the aesthetic becomes a “performance” before contemporary complexity. With the reproducibility, an origin survives in passage: continually restored, but incomplete, present in trace, in absence.

Development of detection methods for irradiated foods - Development of detection method for radiolytic products of irradiated foods

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyong Su; Lee, Eun Ryong; Hong, Hae Jung [Chosun University, Kwangju (Korea)

2000-07-01

Meats, nuts, legumes and cereals were irradiated with {sup 60}Co {gamma}-ray. The detection methods included the fat extraction from samples, isolation of hydrocarbons and 2-alkylcyclobutanones by florisil column chromatography and analyses of GC-FID and GC/MS analyzers. Concentrations of hydrocarbons and 2-clobutanones increased with the irradiation dose in meat, nuts, legumes and cereals. In nuts (sesame seeds, black sesame seeds, perilla seeds, pine nuts and peanuts), legumes (white beans, black soybeans, yellow bean sprout soybeans, mouse-eyed soybeans, mung beans, kidney beans and small red beans) and cereals (brown rice, corns and wheat), 8-heptadecene and 1,7-hexadecadiene originated from oleic acid and 6,9-heptadecadiene and 1,7,10-hexadecatriene induced from linoleic acids were the major hydrocarbons due to the composition of fatty acids. Concentrations of radiation-induced hydrocarbons in nuts were slightly reduced and hydrocarbons were still significantly detectable, during 6 months at -18 deg. C. In meats and nuts, 2-(5'-tetradecenyl)cyclobutanone formed from oleic acid was found in most. 2-Dodecylcyclobutanone was detected in a large amount. The concentrations of radiation-induced 2-alkylcyclobutanones in meats slightly decreased, but relatively constant during 6 months at -18 deg. C. 62 refs., 45 figs., 25 tabs. (Author)

Development and evaluation of prophylactic methods to control the anaplasmosis and babesiosis in the livestock

International Nuclear Information System (INIS)

Toro Benitez, Manuel; Leon Arenas, Edgar; Guillen, Ana T; Lopez B, Roger; Montenegro James, Sonia

1997-01-01

In a combined effort of FONAIAP, through the Technological Development Program (PRODETEC I), the University of Illinois (Agreement FONAIAP - ILLINOIS) and the International Atomic Energy Agency (IAEA) on the part of the Nuclear Investigations Applied to Agriculture Center (CINAGRI), in the Department of Parasitology II V, during the lapse 1982-1990 it was carried out a project whose main objective was the development and evaluation of immuno prophylactics for the control of babesiosis and anaplasmosis in cattle. The results were: (1) In babesiosis, a bivalent vaccine B.Bigemina / B.Bovis, in vitro culture origin ed, which was evaluated under laboratory and field conditions, showing an efficient protection in bovine vaccinated and exposed to the Babesia infection, either experimental or natural. 2) In anaplasmosis, a vaccine inactivated of initial bodies of Ana plasma marginal e, was developed. It was obtained in infected erythrocytes and purified by ultrasonics and differential centrifugation, which showed protective capacity in bovine susceptible of exposure, or parasitic challenge under controlled or field conditions. The obtained vaccines constitute an efficient method, practical and simple, with smaller risk and inferior cost, for protection of bovine against these hemo parasitic diseases illnesses that cause considerable economic lost in the national cattle [es

Development and Validation of a GC-MS Method for the Analysis of Homogentisic Acid in Strawberry Tree (Arbutus unedo L.) Honey.

Science.gov (United States)

Brčić Karačonji, Irena; Jurica, Karlo

2017-07-01

To confirm the botanical origin of strawberry tree (Arbutus unedo L.) honey, a liquid-liquid extraction followed by GC-MS method was developed for the quantitative determination of homogentisic acid (HGA), the main phenolic compound in this honey. Different parameters affecting extraction, such as the type and volume of extraction solvents, pH of the solution, and amount of salt, were optimized. The method showed good linearity (r2 = 0.9990) over the tested concentration range (50-500 mg/kg) and a low LOD (0.3 mg/kg). Precision expressed as RSD was <7%. The average accuracy was 95%. The optimized method was applied for determining the HGA content in strawberry tree honey samples from Croatia. The HGA content in analyzed samples (n = 7) ranged from 245.1 to 485.9 mg/kg. The proposed method provided reliable performance and can be easily implemented for the routine monitoring of HGA in strawberry tree honey in order to assure honey QC.

Development of QuEChERS-based extraction and liquid chromatography-tandem mass spectrometry method for quantifying flumethasone residues in beef muscle.

Science.gov (United States)

Park, Ki Hun; Choi, Jeong-Heui; Abd El-Aty, A M; Cho, Soon-Kil; Park, Jong-Hyouk; Kwon, Ki Sung; Park, Hee Ra; Kim, Hyung Soo; Shin, Ho-Chul; Kim, Mi Ra; Shim, Jae-Han

2012-12-01

A rapid, specific, and sensitive method based on liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) in the positive ion mode using multiple reaction monitoring (MRM) was developed and validated to quantify flumethasone residues in beef muscle. Methods were compared between the original as well as the EN quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based extraction. Good linearity was achieved at concentration levels of 5-30 μg/kg. Estimated recovery rates at spiking levels of 5 and 10 μg/kg ranged from 72.1 to 84.6%, with relative standard deviations (RSDs)noise ratios (S/Ns) of 3 and 10, respectively. The method was successfully applied to analyze real samples obtained from large markets throughout the Korean Peninsula. The method proved to be sensitive and reliable and, thus, rendered an appropriate means for residue analysis studies. Copyright © 2012 Elsevier Ltd. All rights reserved.

Originate: PC input processor for origen-S

International Nuclear Information System (INIS)

Bowman, S.M.

1994-01-01

ORIGINATE is a personal computer program developed at Oak Ridge National Laboratory to serve as a user-friendly interface for the ORIGEN-S isotopic generation and depletion code. It is designed to assist an ORIGEN-S user in preparing an input file for execution of light-water-reactor fuel depletion and decay cases. Output from ORIGINATE is a card-image input file that may be uploaded to a mainframe computer to execute ORIGEN-S in SCALE-4. ORIGINATE features a pull down menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up an ORIGEN-S input file and perform error checking. This capability increases productivity and decreases chance of user error. (authors). 6 refs., 3 tabs

Early Origins of Child Obesity: Bridging Disciplines and Phases of Development - September 30–October 1, 2010

Science.gov (United States)

Christoffel, Katherine Kaufer; Wang, Xiaobin; Binns, Helen J.

2012-01-01

This report summarizes a conference: “Early Origins of Child Obesity: Bridging Disciplines and Phases of Development”, held in Chicago on September 30–October 1, 2010. The conference was funded in part by the National Institutes of Health and the Williams Heart Foundation, to achieve the conference objective: forging a next-step research agenda related to the early origins of childhood obesity. This research agenda was to include working with an array of factors (from genetic determinants to societal ones) along a continuum from prenatal life to age 7, with an emphasis on how the developing child deals with the challenges presented by his/her environment (prenatal, parental, nutritional, etc.). The conference offered a unique opportunity to facilitate communication and planning of future work among a variety of researchers whose work separately addresses different periods in early life. Over the span of two days, speakers addressed existing, critical research topics within each of the most-studied age ranges. On the final day, workshops fostered the discussion needed to identify the highest priority research topics related to linking varied early factor domains. These are presented for use in planning future research and research funding. PMID:23443002

Collection of Wet-Origin Footwear Impressions on Various Surfaces Using an Electrostatic Dust Print Lifter.

Science.gov (United States)

Hong, Sungwook; Park, Miseon

2018-01-19

Electrostatic dust print lift method is known to be able to recover only dry-origin footwear impression. However, the wet-origin footwear impression could also be recovered using this method. As the amount of dust accumulated before deposition of the wet-origin footwear impression increased, the intensity of the footwear impression lifted with this method became stronger. If the footwear impression is not affected by moisture after it is made, the 28-h old wet-origin footwear impression could be recovered using this method. The intensity of the lifted footwear impression did not decrease significantly even when the number of sequential steps increased as long as the shoe sole is wet. However, when the moisture on the shoe sole depleted, the intensity of the footwear impression decreased sharply. This method has the advantage of being able to enhance the footwear impression without being affected by the footwear impressions deposited in the past. © 2018 American Academy of Forensic Sciences.

Exploration Method Development for hydrothermal plume hunting by XCTD

Science.gov (United States)

Kitagawa, Y.; Ikeda, M.; Kadoshima, K.; Koizumi, Y.; Nakano, J.; Asakawa, E.; Sumi, T.

2017-12-01

J-MARES (Research and Development Partnership for Next Generation Technology of Marine Resources Survey, JAPAN) has been designing a low-cost and high-efficiency exploration system for seafloor hydrothermal massive sulfide deposits in "Cross-ministerial Strategic Innovation Promotion Program (SIP)" granted by the Cabinet Office, Government of Japan since 2014. We proposed hydrothermal plume hunting by XCTD (eXpendables Conductivity, Temperature and Depth). We applied this method to an area of interest more than 100km x 100km over Okinawa Trough, including some known seafloor massive sulfide deposits. Generally, hydrothermal plume exploration has been by ship mounted with MBES (Multi Beam Echo Sounder) or AUV with sound anomaly observation. However, these methods have to charter the sophisticated ship costly. On the other hand, throw-in type water quality meters (eg. XCTD and XBT) can be low-cost and easily operable. Moreover, that can make a quick look at seawater temperature and conductivity even in rough waters.Firstly, we confirmed XCTD probes position on the seafloor by ROV mounted deep-sea high vision camera. As a result of the test, probes swept downstream about 40 m in horizontal distance from throwing positions with about 1,600m in water depth. Following the previous test results, we had performed to the next test that confirmed detection range of hydrothermal plume at the chimney of North Mound in Izena Cauldron, so we had caught anomaly of seawater temperature and conductivity successfully which could be possibly derived from hydrothermal activities. Although averaged seawater temperature at a depth of 1500 m or more was about 3.95 degrees C, near the chimney was about 4.93 degrees C. The temperature anomalies originated from the hydrothermal plumes could be distributed at most 30m in horizontal distance and became smaller away from the chimney. Moreover, temperature anomaly mass of sea water tended to move upward in depth with distance away from the

Wildlife forensic science: A review of genetic geographic origin assignment.

Science.gov (United States)

Ogden, Rob; Linacre, Adrian

2015-09-01

Wildlife forensic science has become a key means of enforcing legislation surrounding the illegal trade in protected and endangered species. A relatively new dimension to this area of forensic science is to determine the geographic origin of a seized sample. This review focuses on DNA testing, which relies on assignment of an unknown sample to its genetic population of origin. Key examples of this are the trade in timber, fish and ivory and these are used only to illustrate the large number of species for which this type of testing is potentially available. The role of mitochondrial and nuclear DNA markers is discussed, alongside a comparison of neutral markers with those exhibiting signatures of selection, which potentially offer much higher levels of assignment power to address specific questions. A review of assignment tests is presented along with detailed methods for evaluating error rates and considerations for marker selection. The availability and quality of reference data are of paramount importance to support assignment applications and ensure reliability of any conclusions drawn. The genetic methods discussed have been developed initially as investigative tools but comment is made regarding their use in courts. The potential to compliment DNA markers with elemental assays for greater assignment power is considered and finally recommendations are made for the future of this type of testing. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Dating the Time of Origin of Major Clades: Molecular Clocks and the Fossil Record

Science.gov (United States)

Smith, Andrew B.; Peterson, Kevin J.

Molecular and paleontological data provide independent means of estimating when groups of organisms evolved in the geological past, but neither approach can be considered straightforward. The single most fundamental obstacle to developing an accurate estimate of times of origination from gene sequence data is variation in rates of molecular evolution, both through time and among lineages. Although various techniques have been proposed to circumvent this problem, none unambiguously allow the components of time and rate to be separated. Furthermore, problems of establishing accurate calibration points, correctly rooted phylogenies, and accurate estimates of branch length remain formidable. Conversely, paleontological dates fix only the latest possible time of divergence, and so probabilistic methods are required to set a lower boundary on origination dates. Realistic confidence intervals that take preservational biases into account are only just becoming available. Although molecular and paleontological approaches to dating often agree reasonably well, there are two notable areas of disagreement; when mammal and bird orders originated and when the major phyla originated. The discrepancy in dating bird/mammal ordinal origins probably reflects a global rock-record bias. Paleontological sampling in the Late Cretaceous is still too restricted geographically to draw any firm conclusions about the existence of a pre-Tertiary record for modern orders of bird or mammal from anywhere other than North America. Dating the time of origin of phyla is more complicated, and is confounded by both preservational biases and problems of molecular clock estimation.

Extraembryonic origin of circulating endothelial cells.

Directory of Open Access Journals (Sweden)

Luc Pardanaud

Full Text Available Circulating endothelial cells (CEC are contained in the bone marrow and peripheral blood of adult humans and participate to the revascularization of ischemic tissues. These cells represent attractive targets for cell or gene therapy aimed at improving ischemic revascularization or inhibition of tumor angiogenesis. The embryonic origin of CEC has not been addressed previously. Here we use quail-chick chimeras to study CEC origin and participation to the developing vasculature. CEC are traced with different markers, in particular the QH1 antibody recognizing only quail endothelial cells. Using yolk-sac chimeras, where quail embryos are grafted onto chick yolk sacs and vice-versa, we show that CEC are generated in the yolk sac. These cells are mobilized during wound healing, demonstrating their participation to angiogenic repair processes. Furthermore, we found that the allantois is also able to give rise to CEC in situ. In contrast to the yolk sac and allantois, the embryo proper does not produce CEC. Our results show that CEC exclusively originate from extra-embryonic territories made with splanchnopleural mesoderm and endoderm, while definitive hematopoietic stem cells and endothelial cells are of intra-embryonic origin.

Extraembryonic origin of circulating endothelial cells.

Science.gov (United States)

Pardanaud, Luc; Eichmann, Anne

2011-01-01

Circulating endothelial cells (CEC) are contained in the bone marrow and peripheral blood of adult humans and participate to the revascularization of ischemic tissues. These cells represent attractive targets for cell or gene therapy aimed at improving ischemic revascularization or inhibition of tumor angiogenesis. The embryonic origin of CEC has not been addressed previously. Here we use quail-chick chimeras to study CEC origin and participation to the developing vasculature. CEC are traced with different markers, in particular the QH1 antibody recognizing only quail endothelial cells. Using yolk-sac chimeras, where quail embryos are grafted onto chick yolk sacs and vice-versa, we show that CEC are generated in the yolk sac. These cells are mobilized during wound healing, demonstrating their participation to angiogenic repair processes. Furthermore, we found that the allantois is also able to give rise to CEC in situ. In contrast to the yolk sac and allantois, the embryo proper does not produce CEC. Our results show that CEC exclusively originate from extra-embryonic territories made with splanchnopleural mesoderm and endoderm, while definitive hematopoietic stem cells and endothelial cells are of intra-embryonic origin.

Agile Service Development: A Rule-Based Method Engineering Approach

NARCIS (Netherlands)

dr. Martijn Zoet; Stijn Hoppenbrouwers; Inge van de Weerd; Johan Versendaal

2011-01-01

Agile software development has evolved into an increasingly mature software development approach and has been applied successfully in many software vendors’ development departments. In this position paper, we address the broader agile service development. Based on method engineering principles we

Origin of the Chernobyl myths and stereotypes

International Nuclear Information System (INIS)

Bashilov, A.V.; Borisevich, N.Ya.; Sobolev, O.V.

2013-01-01

The article describes the origin of main negative Chernobyl myths and stereotypes in Belarus' society which do not meet the reality, hinder the revival and development processes of affected territories. (authors)

On the origin of Indonesian cattle.

Directory of Open Access Journals (Sweden)

Kusdiantoro Mohamad

Full Text Available BACKGROUND: Two bovine species contribute to the Indonesian livestock, zebu (Bos indicus and banteng (Bos javanicus, respectively. Although male hybrid offspring of these species is not fertile, Indonesian cattle breeds are supposed to be of mixed species origin. However, this has not been documented and is so far only supported by preliminary molecular analysis. METHODS AND FINDINGS: Analysis of mitochondrial, Y-chromosomal and microsatellite DNA showed a banteng introgression of 10-16% in Indonesian zebu breeds. East-Javanese Madura and Galekan cattle have higher levels of autosomal banteng introgression (20-30% and combine a zebu paternal lineage with a predominant (Madura or even complete (Galekan maternal banteng origin. Two Madura bulls carried taurine Y-chromosomal haplotypes, presumably of French Limousin origin. In contrast, we did not find evidence for zebu introgression in five populations of the Bali cattle, a domestic form of the banteng. CONCLUSIONS: Because of their unique species composition Indonesian cattle represent a valuable genetic resource, which potentially may also be exploited in other tropical regions.

Identification by the DArTseq method of the genetic origin of the Coffea canephora cultivated in Vietnam and Mexico.

Science.gov (United States)

Garavito, Andrea; Montagnon, Christophe; Guyot, Romain; Bertrand, Benoît

2016-11-04

The coffee species Coffea canephora is commercially identified as "Conilon" when produced in Brazil, or "Robusta" when produced elsewhere in the world. It represents approximately 40 % of coffee production worldwide. While the genetic diversity of wild C. canephora has been well studied in the past, only few studies have addressed the genetic diversity of currently cultivated varieties around the globe. Vietnam is the largest Robusta producer in the world, while Mexico is the only Latin American country, besides Brazil, that has a significant Robusta production. Knowledge of the genetic origin of Robusta cultivated varieties in countries as important as Vietnam and Mexico is therefore of high interest. Through the use of Sequencing-based diversity array technology-DArTseq method-on a collection of C. canephora composed of known accessions and accessions cultivated in Vietnam and Mexico, 4,021 polymorphic SNPs were identified. We used a multivariate analysis using SNP data from reference accessions in order to confirm and further fine-tune the genetic diversity of C. canephora. Also, by interpolating the data obtained for the varieties from Vietnam and Mexico, we determined that they are closely related to each other, and identified that their genetic origin is the Robusta Congo - Uganda group. The genetic characterization based on SNP markers of the varieties grown throughout the world, increased our knowledge on the genetic diversity of C. canephora, and contributed to the understanding of the genetic background of varieties from very important coffee producers. Given the common genetic origin of the Robusta varieties cultivated in Vietnam, Mexico and Uganda, and the similar characteristics of climatic areas and relatively high altitude where they are grown, we can state that the Vietnamese and the Mexican Robusta have the same genetic potential to produce good cup quality.

Original Researc Original Research

African Journals Online (AJOL)

RAGHAVENDRA

Practices. Problems. Supervision. Primary School. *Corresponding Author: Asrat Dagnew. E-mail: asratboza@yahoo.com tructional support. The relevant and ... vision is one of indispensable system pment. Supervision is a system of that directly concerned on the aff members in a school or other. Original Research ...

LightCDD: Application of a Capability-Driven Development Method for Start-ups Development

Directory of Open Access Journals (Sweden)

Hasan Koç

2017-04-01

Full Text Available Novice innovators and entrepreneurs face the risk of designing naive business models. In fact, lack of viability in business models is perceived to be a major threat for the start-up success. Both the literature and the responses we gathered from experts in incubation present evidences of this problem. The LightCDD method helps entrepreneurs in the analysis, design and specification of start-ups that are context aware and adaptive to contextual changes and evolution. In this article we describe the LightCDD method, a context-aware enterprise modeling method that is tailored for business model generation. The LightCDD applies a lightweight Capability‑Driven Development (CDD methodology. It reduces the set of modeling constructs and guidelines to facilitate its adoption by entrepreneurs, yet keeping it expressive enough for their purposes and, at the same time, compatible with the CDD methodology. We provide a booklet with the LightCDD method for start-ups development. The feasibility of the LightCDD method is validated by means of its application to one start-up development case. From a practitioner viewpoint (entrepreneurs and experts in incubation, it is important to provide integrative modeling perspectives to specify business ideas, but it is vital to keep it light. The LightCDD is giving a step forward in this direction. From a researcher point of view, the LightCDD booklet facilitates the application of LightCDD to different start-up development cases. The feasibility validation has produced important feedback for further empirical validation exercises in which is necessary to study the scalability and sensitivity of LightCDD.

Rapid discrimination of geographical origin and evaluation of antioxidant activity of Salvia miltiorrhiza var. alba by Fourier transform near infrared spectroscopy.

Science.gov (United States)

Duan, Xiaoju; Zhang, Danlu; Nie, Lei; Zang, Hengchang

2014-03-25

Radix Salvia miltiorrhiza Bge. var. alba C.Y. Wu and H.W. Li and Radix S. miltrorrhiza belong to the same genus. S. miltiorrhiza var. alba has a unique effectiveness for thromboangiitis besides therapeutical efficay of S. miltrorrhiza. It exhibits antioxidant activity (AA), while its quality and efficacy also vary with geographic locations. Therefore, a rapid and nondestructive method based on Fourier transform near infrared spectroscopy (FT-NIRS) was developed for discrimination of geographical origin and evaluation of AA of S. miltiorrhiza var. alba. The discrimination of geographical origin was achieved by using discriminant analysis and the accuracy was 100%. Partial least squares (PLS) regression was employed to establish the model for evaluation of AA by NIRS. The spectral regions were selected by interval PLS (i-PLS) method. Different pre-treated methods were compared for the spectral pre-processing. The final optimal results of PLS model showed that correlation coefficients in the calibration set (Rc) and the prediction set (Rp), root mean square error of prediction (RMSEP) and residual prediction deviation (RPD) were 0.974, 0.950, 0.163 mg mL(-1) and 2.66, respectively. The results demonstrated that NIRs combined with chemometric methods could be a rapid and nondestructive tool to discriminate geographical origin and evaluate AA of S. miltiorrhiza var. alba. The developed NIRS method might have a potential application to high-throughput screening of a great number of raw S. miltiorrhiza var. alba samples for AA. Copyright © 2013 Elsevier B.V. All rights reserved.

222Rn and short live progeny in atmospheric environment. Origin and measurement techniques

International Nuclear Information System (INIS)

Charuau, J.; Labed, V.; Robe, M.C.; Thevenin, J.C.; Fazileabasse, J.; Klein, D.; Heleschewitz, H.; Tymen, G.; Aubert, C.; Gibaud, C.

1996-01-01

Radon is the main source of man's exposure to natural ionizing radiation. This document summarizes the general knowledge of the origin of radon 222 and its development in various air environments. It presents several methods for measuring radon activity concentration and the potential alpha energy from its short life daughters. It has been prepared by the commission M60-3, of the Office for the standardization of nuclear equipments (BNEN in French) under the French association for standardization (AFNOR in French). (author)

A new and fast image feature selection method for developing an optimal mammographic mass detection scheme.

Science.gov (United States)

Tan, Maxine; Pu, Jiantao; Zheng, Bin

2014-08-01

Selecting optimal features from a large image feature pool remains a major challenge in developing computer-aided detection (CAD) schemes of medical images. The objective of this study is to investigate a new approach to significantly improve efficacy of image feature selection and classifier optimization in developing a CAD scheme of mammographic masses. An image dataset including 1600 regions of interest (ROIs) in which 800 are positive (depicting malignant masses) and 800 are negative (depicting CAD-generated false positive regions) was used in this study. After segmentation of each suspicious lesion by a multilayer topographic region growth algorithm, 271 features were computed in different feature categories including shape, texture, contrast, isodensity, spiculation, local topological features, as well as the features related to the presence and location of fat and calcifications. Besides computing features from the original images, the authors also computed new texture features from the dilated lesion segments. In order to select optimal features from this initial feature pool and build a highly performing classifier, the authors examined and compared four feature selection methods to optimize an artificial neural network (ANN) based classifier, namely: (1) Phased Searching with NEAT in a Time-Scaled Framework, (2) A sequential floating forward selection (SFFS) method, (3) A genetic algorithm (GA), and (4) A sequential forward selection (SFS) method. Performances of the four approaches were assessed using a tenfold cross validation method. Among these four methods, SFFS has highest efficacy, which takes 3%-5% of computational time as compared to GA approach, and yields the highest performance level with the area under a receiver operating characteristic curve (AUC) = 0.864 ± 0.034. The results also demonstrated that except using GA, including the new texture features computed from the dilated mass segments improved the AUC results of the ANNs optimized

Adaptation of an Agile Information System Development Method

NARCIS (Netherlands)

Aydin, M.N.; Harmsen, A.F.; van Hillegersberg, Jos; Stegwee, R.A.; Siau, K.

2007-01-01

Little specific research has been conducted to date on the adaptation of agile information systems development (ISD) methods. This chapter presents the work practice in dealing with the adaptation of such a method in the ISD department of one of the leading financial institutes in Europe. The

Development of quadruped walking locomotion gait generator using a hybrid method

International Nuclear Information System (INIS)

Jasni, F; Shafie, A A

2013-01-01

The earth, in many areas is hardly reachable by the wheeled or tracked locomotion system. Thus, walking locomotion system is becoming a favourite option for mobile robot these days. This is because of the ability of walking locomotion to move on the rugged and unlevel terrains. However, to develop a walking locomotion gait for a robot is not a simple task. Central Pattern Generator (CPGs) method is a biological inspired method that is introduced as a method to develop the gait for the walking robot recently to tackle the issue faced by the conventional method of pre-designed trajectory based method. However, research shows that even the CPG method do have some limitations. Thus, in this paper, a hybrid method that combines CPG and the pre-designed trajectory based method is introduced to develop a walking gait for quadruped walking robot. The 3-D foot trajectories and the joint angle trajectories developed using the proposed method are compared with the data obtained via the conventional method of pre-designed trajectory to confirm the performance

The change and development of statistical methods used in research articles in child development 1930-2010.

Science.gov (United States)

Køppe, Simo; Dammeyer, Jesper

2014-09-01

The evolution of developmental psychology has been characterized by the use of different quantitative and qualitative methods and procedures. But how does the use of methods and procedures change over time? This study explores the change and development of statistical methods used in articles published in Child Development from 1930 to 2010. The methods used in every article in the first issue of every volume were categorized into four categories. Until 1980 relatively simple statistical methods were used. During the last 30 years there has been an explosive use of more advanced statistical methods employed. The absence of statistical methods or use of simple methods had been eliminated.

Development of a method for RIA of MLH

International Nuclear Information System (INIS)

Zhang Haoyi; Jin Lichun

2002-01-01

Objective: To develop a method of RIA for MLH to measure the serum level of LH in Rhesus Monkey for animal experiment in reproductive medicine. Methods: 125 I-MLH was prepared with chloramine T-Iodogen method. Rabbit anti-MLH was used as first antibody and sheep anti-rabbit IgG was used as separating agent. RIA was performed with liquid phase competitive radioassay. Results: The specific radioactivity of labelled antigen was 67 μg/mCi; antibody affinity constant was Ka = 3.44 x 10 -9 mol/L the shape of the standard curve was good. r = 0.991, intra-assay error CV = 3.49%, inter-assay error CV = 4.65%. The minimal detectable concentration was 0.42 μg/ml. Mean value of 30 normal Rhesus Monkey serum specimens was 1.17 +- 1.30 μg/ml. Conclusion: The developed method was simple reliable and sensitive. It would be of use in study of contraceptive and sex-physiology drugs

Scientific methods for developing ultrastable structures

International Nuclear Information System (INIS)

Gamble, M.; Thompson, T.; Miller, W.

1990-01-01

Scientific methods used by the Los Alamos National Laboratory for developing an ultrastable structure for study of silicon-based elementary particle tracking systems are addressed. In particular, the design, analysis, and monitoring of this system are explored. The development methodology was based on a triad of analytical, computational, and experimental techniques. These were used to achieve a significant degree of mechanical stability (alignment accuracy >1 μrad) and yet allow dynamic manipulation of the system. Estimates of system thermal and vibratory stability and component performance are compared with experimental data collected using laser interferometry and accelerometers. 8 refs., 5 figs., 4 tabs

FREEZING AND THAWING TIME PREDICTION METHODS OF FOODS II: NUMARICAL METHODS

Directory of Open Access Journals (Sweden)

Yahya TÜLEK

1999-03-01

Full Text Available Freezing is one of the excellent methods for the preservation of foods. If freezing and thawing processes and frozen storage method are carried out correctly, the original characteristics of the foods can remain almost unchanged over an extended periods of time. It is very important to determine the freezing and thawing time period of the foods, as they strongly influence the both quality of food material and process productivity and the economy. For developing a simple and effectively usable mathematical model, less amount of process parameters and physical properties should be enrolled in calculations. But it is a difficult to have all of these in one prediction method. For this reason, various freezing and thawing time prediction methods were proposed in literature and research studies have been going on.

Differentiation of wines according to grape variety and geographical origin based on volatiles profiling using SPME-MS and SPME-GC/MS methods.

Science.gov (United States)

Ziółkowska, Angelika; Wąsowicz, Erwin; Jeleń, Henryk H

2016-12-15

Among methods to detect wine adulteration, profiling volatiles is one with a great potential regarding robustness, analysis time and abundance of information for subsequent data treatment. Volatile fraction fingerprinting by solid-phase microextraction with direct analysis by mass spectrometry without compounds separation (SPME-MS) was used for differentiation of white as well as red wines. The aim was to differentiate between varieties used for wine production and to also differentiate wines by country of origin. The results obtained were compared to SPME-GC/MS analysis in which compounds were resolved by gas chromatography. For both approaches the same type of statistical procedure was used to compare samples: principal component analysis (PCA) followed by linear discriminant analysis (LDA). White wines (38) and red wines (41) representing different grape varieties and various regions of origin were analysed. SPME-MS proved to be advantageous in use due to better discrimination and higher sample throughput. Copyright © 2016 Elsevier Ltd. All rights reserved.

METHODIC OF DEVELOPMENT OF MOTOR GIFTEDNESS OF PRESCHOOL CHILDREN

Directory of Open Access Journals (Sweden)

Fedorova Svetlana Yurievna

2013-04-01

Full Text Available Education and training of gifted children today appropriate to consider as an important strategic task of modern society. In this context, the purpose of research is the development motor giftedness, which is particularly relevant at the stage of pre-school education, which is caused by age-preschoolers. Preschoolers' motor giftedness is considered by the author as developing integrated quality, including psychomotor skills, inclinations, increased motivation for motor activity. In the process of study the following methods are used: the study and analysis of the scientific and methodological literature on studies, questioning, interview, testing of physical fitness, statistical data processing. The result of research work is methodic of development of motor giftedness on physical education in preschool. The author's methodic consists of four steps: diagnostic, prognostic, practice and activity, social and pedagogical. Each step determines the inclusion of preschool children in sports and developing environment that meets his or her abilities and needs through the creation of certain social and educational conditions. The area of using results of the author's methodic is preschool and the system of improvement professional skill of teachers.

Origin, structure and evolution of galaxies

International Nuclear Information System (INIS)

Zhi, F.L.

1988-01-01

Recent developments of the origin, structure and evolution of galaxies have been reviewed. The contents of this book are: Inflationary Universe; Cosmic String; Active Galaxies; Intergalactic Medium; Waves in Disk Galaxies; Dark Matter; Gas Dynamics in Disk Galaxies; Equilibrium and Stability of Spiral Galaxies

Water Loss Management: Tools and Methods for Developing Countries

OpenAIRE

Mutikanga, H.E.

2012-01-01

Water utilities in developing countries are struggling to provide customers with a reliable level of service due to their peculiar water distribution characteristics including poorly zoned networks with irregular supply operating under restricted budgets. These unique conditions demand unique tools and methods for water loss control. Water loss management: Tools and Methods for Developing Countries provide a decision support toolbox (appropriate tools and methodologies) for assessing, quantif...

Pharmaceutical counselling about different types of tablet-splitting methods based on the results of weighing tests and mechanical development of splitting devices.

Science.gov (United States)

Somogyi, O; Meskó, A; Csorba, L; Szabó, P; Zelkó, R

2017-08-30

The division of tablets and adequate methods of splitting them are a complex problem in all sectors of health care. Although tablet-splitting is often required, this procedure can be difficult for patients. Four tablets were investigated with different external features (shape, score-line, film-coat and size). The influencing effect of these features and the splitting methods was investigated according to the precision and "weight loss" of splitting techniques. All four types of tablets were halved by four methods: by hand, with a kitchen knife, with an original manufactured splitting device and with a modified tablet splitter based on a self-developed mechanical model. The mechanical parameters (harness and friability) of the products were measured during the study. The "weight loss" and precision of splitting methods were determined and compared by statistical analysis. On the basis of the results, the external features (geometry), the mechanical parameters of tablets and the mechanical structure of splitting devices can influence the "weight loss" and precision of tablet-splitting. Accordingly, a new decision-making scheme was developed for the selection of splitting methods. In addition, the skills of patients and the specialties of therapy should be considered so that pharmaceutical counselling can be more effective regarding tablet-splitting. Copyright © 2017 Elsevier B.V. All rights reserved.

Quantitative methods for developing C2 system requirement

Energy Technology Data Exchange (ETDEWEB)

Tyler, K.K.

1992-06-01

The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the ``communications gap`` between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff? This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

Development and validation of a spectroscopic method for the ...

African Journals Online (AJOL)

Development and validation of a spectroscopic method for the simultaneous analysis of ... advanced analytical methods such as high pressure liquid ..... equipment. DECLARATIONS ... high-performance liquid chromatography. J Chromatogr.

New developments in the Csub(N) method

International Nuclear Information System (INIS)

Grandjean, Paul; Kavenoky, Alain.

1975-01-01

The most recent developments of the Csub(N) method used for solving transport equations are presented: treatment of the Rayleigh scattering kernel in plane geometry and of the cylindrical problems with an isotropic scattering law [fr

Valid methods: the quality assurance of test method development, validation, approval, and transfer for veterinary testing laboratories.

Science.gov (United States)

Wiegers, Ann L

2003-07-01

Third-party accreditation is a valuable tool to demonstrate a laboratory's competence to conduct testing. Accreditation, internationally and in the United States, has been discussed previously. However, accreditation is only I part of establishing data credibility. A validated test method is the first component of a valid measurement system. Validation is defined as confirmation by examination and the provision of objective evidence that the particular requirements for a specific intended use are fulfilled. The international and national standard ISO/IEC 17025 recognizes the importance of validated methods and requires that laboratory-developed methods or methods adopted by the laboratory be appropriate for the intended use. Validated methods are therefore required and their use agreed to by the client (i.e., end users of the test results such as veterinarians, animal health programs, and owners). ISO/IEC 17025 also requires that the introduction of methods developed by the laboratory for its own use be a planned activity conducted by qualified personnel with adequate resources. This article discusses considerations and recommendations for the conduct of veterinary diagnostic test method development, validation, evaluation, approval, and transfer to the user laboratory in the ISO/IEC 17025 environment. These recommendations are based on those of nationally and internationally accepted standards and guidelines, as well as those of reputable and experienced technical bodies. They are also based on the author's experience in the evaluation of method development and transfer projects, validation data, and the implementation of quality management systems in the area of method development.

The Change and Development of Statistical Methods Used in Research Articles in Child Development 1930-2010

DEFF Research Database (Denmark)

Køppe, Simo; Dammeyer, Jesper Herup

2014-01-01

The evolution of developmental psychology has been characterized by the use of different quantitative and qualitative methods and procedures. But how does the use of methods and procedures change over time? This study explores the change and Development of statistical methods used in articles...... published in Child Development from 1930 to 2010. The methods used in every article in the first issue of every volume were categorized into four categories. Until 1980 relatively simple statistical methods were used. During the last 30 years there has been an explosive use of more advanced statistical...... methods employed. The absence of statistical methods or use of simplemethods had been eliminated....

Development of a taqman-based real-time PCR assay for the rapid and specific detection of novel duck- origin goose parvovirus.

Science.gov (United States)

Wang, Jianchang; Wang, Jinfeng; Cui, Yuan; Nan, Huizhu; Yuan, Wanzhe

2017-08-01

A real-time PCR assay was developed for specific detection of novel duck-origin goose parvovirus (N-GPV), the etiological agent of duck beak atrophy and dwarfism syndrome (BADS). The detection limit of the assay was 10 2 copies. The assay was useful in the prevention and control of BADS. Copyright © 2017 Elsevier Ltd. All rights reserved.

First study about the development of adult Echinococcus canadensis G6 genotype of goat origin in experimentally infected dogs.

Science.gov (United States)

Soriano, Silvia Viviana; Debiaggi, María Florencia; Pierangeli, Nora Beatriz; Pianciola, Luis Alfredo; Bergagna, Héctor Fabián Jesús; Lazzarini, Lorena Evelina; Mazzeo, Melina Leonor; Basualdo, Juan Angel

2016-09-15

Echinococcus granulosus sensu lato (E. granulosus sl) must be considered as a species complex, comprising Echinococcus granulosus sensu stricto (E. granulosus ss, genotypes G1-G3), Echinococcus equinus (G4), Echinococcus ortleppi (G5) and Echinococcus canadensis (G6-G10) although the species status of E. canadensis is still controversial. These genotypes closely match the intermediate hosts associated strains described in earlier times among which E. canadensis G6 corresponds to the camel strain. As there are no studies concerning the development of adult stages of the G6 genotype from non-camel origin, the aims of the present study were: to characterize for the first time the development of E. canadensis G6 in dogs experimentally infected with protoscoleces derived from goats, to describe the resultant adult morphology, to evaluate the growth of their rostellar hooks from larval to adult stages and to determine the prepatent period of the strobilar stage of E. canadensis G6 derived from goats. The development of the strobilar stage of E. canadensis G6 genotype of goat origin was examined by studying the growth (variation of the total worm length) and segmentation in experimentally infected dogs at 14, 25, 35 and 56days post infection. A morphological characterization of 35-day-old worms as well as of larval and adult rostellar hooks was also carried out by conventional optical microscopic observations and/or by scanning electron microscopy. The prepatent period of the strobilar stage was assessed by microscopic examination of faeces from 2 infected dogs. Our results were compared with published data from the camel and other strains. The roles of the host, genotype and species in morphological and developmental features as well as the taxonomic position of E. canadensis G6 were discussed. The prepatent period of E. canadensis G6 genotype of goat origin was determined as at least, 41days. The obtained results contribute to increase the knowledge about the biology

Prioritizing pesticide compounds for analytical methods development

Science.gov (United States)

Norman, Julia E.; Kuivila, Kathryn; Nowell, Lisa H.

2012-01-01

The U.S. Geological Survey (USGS) has a periodic need to re-evaluate pesticide compounds in terms of priorities for inclusion in monitoring and studies and, thus, must also assess the current analytical capabilities for pesticide detection. To meet this need, a strategy has been developed to prioritize pesticides and degradates for analytical methods development. Screening procedures were developed to separately prioritize pesticide compounds in water and sediment. The procedures evaluate pesticide compounds in existing USGS analytical methods for water and sediment and compounds for which recent agricultural-use information was available. Measured occurrence (detection frequency and concentrations) in water and sediment, predicted concentrations in water and predicted likelihood of occurrence in sediment, potential toxicity to aquatic life or humans, and priorities of other agencies or organizations, regulatory or otherwise, were considered. Several existing strategies for prioritizing chemicals for various purposes were reviewed, including those that identify and prioritize persistent, bioaccumulative, and toxic compounds, and those that determine candidates for future regulation of drinking-water contaminants. The systematic procedures developed and used in this study rely on concepts common to many previously established strategies. The evaluation of pesticide compounds resulted in the classification of compounds into three groups: Tier 1 for high priority compounds, Tier 2 for moderate priority compounds, and Tier 3 for low priority compounds. For water, a total of 247 pesticide compounds were classified as Tier 1 and, thus, are high priority for inclusion in analytical methods for monitoring and studies. Of these, about three-quarters are included in some USGS analytical method; however, many of these compounds are included on research methods that are expensive and for which there are few data on environmental samples. The remaining quarter of Tier 1

Antimicrobial Testing Methods & Procedures Developed by EPA's Microbiology Laboratory

Science.gov (United States)

We develop antimicrobial testing methods and standard operating procedures to measure the effectiveness of hard surface disinfectants against a variety of microorganisms. Find methods and procedures for antimicrobial testing.

The origin, development and a brief appraisal of the doctrine of the ...

African Journals Online (AJOL)

2013-03-12

Mar 12, 2013 ... Faith Tabernacle Church', falls outside the focus of this work. The constitution of the CAC was drafted in 1942 ... Apostolic Church was originally called the Faith Tabernacle.' Again, Alokan's claim (1991:147) that the ..... poison with immunity and the ability to heal the sick. The. CAC Constitution and Doctrine ...

Original Framework for Optimizing Hybrid Energy Supply

Directory of Open Access Journals (Sweden)

Amevi Acakpovi

2016-01-01

Full Text Available This paper proposes an original framework for optimizing hybrid energy systems. The recent growth of hybrid energy systems in remote areas across the world added to the increasing cost of renewable energy has triggered the inevitable development of hybrid energy systems. Hybrid energy systems always pose a problem of optimization of cost which has been approached with different perspectives in the recent past. This paper proposes a framework to guide the techniques of optimizing hybrid energy systems in general. The proposed framework comprises four stages including identification of input variables for energy generation, establishment of models of energy generation by individual sources, development of artificial intelligence, and finally summation of selected sources. A case study of a solar, wind, and hydro hybrid system was undertaken with a linear programming approach. Substantial results were obtained with regard to how load requests were constantly satisfied while minimizing the cost of electricity. The developed framework gained its originality from the fact that it has included models of individual sources of energy that even make the optimization problem more complex. This paper also has impacts on the development of policies which will encourage the integration and development of renewable energies.

Development of a new disintegration method for orally disintegrating tablets.

Science.gov (United States)

Kakutani, Ryo; Muro, Hiroyuki; Makino, Tadashi

2010-07-01

Recently, the focus has been on the importance of assessing the oral disintegrative properties of orally disintegrating tablets (ODTs). In particular, in the development stages and the quality control field of ODT products, a physical assessment method which easily measures oral disintegrative properties is desired. For this reason, we developed a new disintegration test method (Kyoto-model disintegration method or KYO method), which is useful to predict the oral disintegrative properties of an ODT easily, and examined the availability of the method. In the KYO method, ODT samples were classified in terms of their water permeability, and a moderate water volume was decided. Subsequently, the disintegrative properties were assessed with the newly proposed method. For 25 commercial prescription ODTs used as samples, a good correlation was shown between the results of a human sensory test by five healthy male volunteers and the results using the KYO method. Furthermore, the KYO method could evaluate time-dependent changes in ODT samples. On the other hand, no correlation was observed between the Japanese Pharmacopeia disintegration test and the human sensory test. These results suggested that the KYO method reflected the disintegration nature of the ODTs in the oral cavity, and could easily be applied to development stages and the quality control field of ODT products.

Developing the Students’ English Speaking Ability Through Impromptu Speaking Method.

Science.gov (United States)

Lumettu, A.; Runtuwene, T. L.

2018-01-01

Having multi -purposes, English mastery has becomea necessary for us.Of the four language skills, speaking skill should get the first priority in English teaching and speaking skills development cannot be separated from listening.One communicative way of developing speaking skill is impromptu speaking,a method sudden speaking which depends only on experience and insight by applying spontaneity or improvisation. It is delivered based on the need of the moment of speaking using simple language.This research aims to know (1). Why impromptu speaking is necessary in teaching speaking? (2). How can impromptu speaking develop the students’ speaking skills.The method of this research is qualitative method and the techniques of data collection are: observation,interview and documentation. The results of data analysis using Correlation shows a strong relation between the students’ speaking ability and impromptu speaking method (r = 0.80).The research show that by using impromptu speaking method, the students are trained to interact faster naturally and spontaneously and enrich their vocabulary and general science to support speaking development through interview, speech, presentation, discussion and storytelling.

Development of digital radiographic inspection method in MINT

International Nuclear Information System (INIS)

Mohd Ashhar Khalid; Abdul Razak Hamzah; Abdul Aziz Mohamad; Anuar Mikdad Muad; Nolida Yussup; Maslina Mohd Ibrahim

2002-01-01

Industrial radiography has been employed for the evaluation of defects, such as cracks, porosity and foreign inclusions found in casting and welds. It has become one of the major techniques in industrial non-destructive testing for the past 40 years. Although this technique has been well developed, further improvement can be implemented especially with the advancement of electronics and computer technology. Digital image processing techniques and application of artificial intelligence methods allow the interpretation of the image to be automated, avoiding the presence of human operators making the inspection system faster, more reliable and reproducible. Numerous works has been reported by various groups on the development of an automated, computer based evaluation algorithms. This paper reports the development and progress of digital radiographic inspection method in MINT. (Author)

Review of analytical methods for the quantification of iodine in complex matrices

Energy Technology Data Exchange (ETDEWEB)

Shelor, C. Phillip [Department of Chemistry and Biochemistry, University of Texas at Arlington, Arlington, TX 76019-0065 (United States); Dasgupta, Purnendu K., E-mail: Dasgupta@uta.edu [Department of Chemistry and Biochemistry, University of Texas at Arlington, Arlington, TX 76019-0065 (United States)

2011-09-19

Highlights: {yields} We focus on iodine in biological samples, notably urine and milk. {yields} Sample preparation and the Sandell-Kolthoff method are extensively discussed. - Abstract: Iodine is an essential element of human nutrition. Nearly a third of the global population has insufficient iodine intake and is at risk of developing Iodine Deficiency Disorders (IDD). Most countries have iodine supplementation and monitoring programs. Urinary iodide (UI) is the biomarker used for epidemiological studies; only a few methods are currently used routinely for analysis. These methods either require expensive instrumentation with qualified personnel (inductively coupled plasma-mass spectrometry, instrumental nuclear activation analysis) or oxidative sample digestion to remove potential interferences prior to analysis by a kinetic colorimetric method originally introduced by Sandell and Kolthoff {approx}75 years ago. The Sandell-Kolthoff (S-K) method is based on the catalytic effect of iodide on the reaction between Ce{sup 4+} and As{sup 3+}. No available technique fully fits the needs of developing countries; research into inexpensive reliable methods and instrumentation are needed. There have been multiple reviews of methods used for epidemiological studies and specific techniques. However, a general review of iodine determination on a wide-ranging set of complex matrices is not available. While this review is not comprehensive, we cover the principal developments since the original development of the S-K method.

Advanced differential quadrature methods

CERN Document Server

Zong, Zhi

2009-01-01

Modern Tools to Perform Numerical DifferentiationThe original direct differential quadrature (DQ) method has been known to fail for problems with strong nonlinearity and material discontinuity as well as for problems involving singularity, irregularity, and multiple scales. But now researchers in applied mathematics, computational mechanics, and engineering have developed a range of innovative DQ-based methods to overcome these shortcomings. Advanced Differential Quadrature Methods explores new DQ methods and uses these methods to solve problems beyond the capabilities of the direct DQ method.After a basic introduction to the direct DQ method, the book presents a number of DQ methods, including complex DQ, triangular DQ, multi-scale DQ, variable order DQ, multi-domain DQ, and localized DQ. It also provides a mathematical compendium that summarizes Gauss elimination, the Runge-Kutta method, complex analysis, and more. The final chapter contains three codes written in the FORTRAN language, enabling readers to q...

Inflow Turbulence Generation Methods

Science.gov (United States)

Wu, Xiaohua

2017-01-01

Research activities on inflow turbulence generation methods have been vigorous over the past quarter century, accompanying advances in eddy-resolving computations of spatially developing turbulent flows with direct numerical simulation, large-eddy simulation (LES), and hybrid Reynolds-averaged Navier-Stokes-LES. The weak recycling method, rooted in scaling arguments on the canonical incompressible boundary layer, has been applied to supersonic boundary layer, rough surface boundary layer, and microscale urban canopy LES coupled with mesoscale numerical weather forecasting. Synthetic methods, originating from analytical approximation to homogeneous isotropic turbulence, have branched out into several robust methods, including the synthetic random Fourier method, synthetic digital filtering method, synthetic coherent eddy method, and synthetic volume forcing method. This article reviews major progress in inflow turbulence generation methods with an emphasis on fundamental ideas, key milestones, representative applications, and critical issues. Directions for future research in the field are also highlighted.

The restructuring and privatisation trajectory in South Africa: tracing the historical public policy origins, purpose, methods and guidelines in the pre-1994 epoch

Directory of Open Access Journals (Sweden)

Nyawo Gumede

2016-03-01

Full Text Available Many perspectives have been propounded and written about the restructuring and privatisation reform. However, this paper endeavours to give a South African approach to the reform profoundly delving into its historical approach on the original definition, methods, factors, criteria and goals of the reform. This paper seeks to demonstrate that this reform has its origins in the apartheid government policy which was intended at strengthening and revitalising the apartheid political economy in the 1980s. The thinking that the private sector runs enterprises in a more efficient, effective, competitive and profitable way and that such an approach may be applied to the State Owned Enterprises with success in an effort to reduce government debt and improving the operational performance, attracted the then South African government into adopting this neoliberal trajectory. State Owned Enterprises compared to their private counterparts performed poorly and suffered heavy losses and ultimately drained government financially. The then South African government initiated a white paper on privatisation and deregulation in 1987 which culminated in the implementation of the restructuring and privatisation reform in South Africa. Thus, this paper posits that the privatisation and restructuring reform originated from the then South African government policy initiatives in the 1980s.

Suggestions on the Development of Safety Culture Assessment Method

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Kwang Sik; Kim, Woong Sik

2006-01-01

Several efforts have been made to assess safety culture of organization that operates nuclear power plants in Korea. The MOST and KINS played a major role to develop assessment methods and KHNP applied them to its NPPs. This paper explains the two methods developed by KINS briefly and presents the insights obtained from the two different applications. It concludes with some suggestions for safety culture assessment based on the insights

Development and application of methods to characterize code uncertainty

International Nuclear Information System (INIS)

Wilson, G.E.; Burtt, J.D.; Case, G.S.; Einerson, J.J.; Hanson, R.G.

1985-01-01

The United States Nuclear Regulatory Commission sponsors both international and domestic studies to assess its safety analysis codes. The Commission staff intends to use the results of these studies to quantify the uncertainty of the codes with a statistically based analysis method. Development of the methodology is underway. The Idaho National Engineering Laboratory contributions to the early development effort, and testing of two candidate methods are the subjects of this paper

Coronary artery with aberrant origin malignant right

International Nuclear Information System (INIS)

Ozcan, E.; Bozlar, U.; Demirkol, S.; Saglam, M.

2012-01-01

Full text: Introduction: Congenital anomalies of the coronary arteries is a major cause of sudden death, especially in young patients. Objectives and tasks: In this study we aim to present a young patient with chest pain who had malignant right coronary artery (RCA) with aberrant origin. Materials and methods: 24-year-old man who applied cardiology clinic for chest pain and palpitations especially after exercise, was referred to our clinic for coronary computed tomography (CT) angiography to evaluate coronary artery anomalies. Results: In CT angiography; we detected aberrant RCA with origin of tubularly part of ascendant aorta with a malignant course between aorta and pulmonary artery. Left main coronary artery, left anterior descending and circumflex artery had normal origin and course. Conclusion: Coronary artery with malignant course may cause sudden death especially after exercise. Coronary CT angiography has an important role in diagnosis of congenital coronary artery anomalies, with high resolution multiplanner reformatted images

Origins Space Telescope: Study Plan

Science.gov (United States)

Nayyeri, Hooshang; Cooray, Asantha; Origins Space Telescope Study Team

2018-01-01

The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. This presentation will provide a summary of the OST STDT, the OST Study Team based at NASA Goddard Space Flight Center, study partners, and the advisory panel to the study. This presentation will also summarize recent activities, including the process used to reach a decision on the mission architecture, the identification of key science drivers, and the key study milestones between 2017 and 2020.

DEVELOPMENT OF A RISK SCREENING METHOD FOR CREDITED OPERATOR ACTIONS

International Nuclear Information System (INIS)

HIGGINS, J.C.; O'HARA, J.M.; LEWIS, P.M.; PERSENSKY, J.; BONGARRA, J.

2002-01-01

DEVELOPMENT OF A RISK SCREENING METHOD FOR CREDITED OPERATOR ACTIONS. THE U.S. NUCLEAR REGULATORY COMMISSION (NRC) REVIEWS THE HUMAN FACTORS ASPECTS OF PROPOSED LICENSE AMENDMENTS THAT IMPACT HUMAN ACTIONS THAT ARE CREDITED IN A PLANTS SAFETY ANALYSIS. THE STAFF IS COMMITTED TO A GRADED APPROACH TO THESE REVIEWS THAT FOCUS RESOURCES ON THE MOST RISK IMPORTANT CHANGES. THEREFORE, A RISK INFORMED SCREENING METHOD WAS DEVELOPED BASED ON AN ADAPTATION OF EXISTING GUIDANCE FOR RISK INFORMED REGULATION AND HUMAN FACTORS. THE METHOD USES BOTH QUANTITATIVE AND QUALITATIVE INFORMATION TO DIVIDE THE AMENDMENT REQUESTS INTO DIFFERENT LEVELS OF REVIEW. THE METHOD WAS EVALUATED USING A VARIETY OF TESTS. THIS PAPER WILL SUMMARIZE THE DEVELOPMENT OF THE METHODOLOGY AND THE EVALUATIONS THAT WERE PERFORMED TO VERIFY ITS USEFULNESS

Original analytic solution of a half-bridge modelled as a statically indeterminate system

Science.gov (United States)

Oanta, Emil M.; Panait, Cornel; Raicu, Alexandra; Barhalescu, Mihaela

2016-12-01

The paper presents an original computer based analytical model of a half-bridge belonging to a circular settling tank. The primary unknown is computed using the force method, the coefficients of the canonical equation being calculated using either the discretization of the bending moment diagram in trapezoids, or using the relations specific to the polygons. A second algorithm based on the method of initial parameters is also presented. Analyzing the new solution we came to the conclusion that most of the computer code developed for other model may be reused. The results are useful to evaluate the behavior of the structure and to compare with the results of the finite element models.

Stochastic development regression using method of moments

DEFF Research Database (Denmark)

Kühnel, Line; Sommer, Stefan Horst

2017-01-01

This paper considers the estimation problem arising when inferring parameters in the stochastic development regression model for manifold valued non-linear data. Stochastic development regression captures the relation between manifold-valued response and Euclidean covariate variables using...... the stochastic development construction. It is thereby able to incorporate several covariate variables and random effects. The model is intrinsically defined using the connection of the manifold, and the use of stochastic development avoids linearizing the geometry. We propose to infer parameters using...... the Method of Moments procedure that matches known constraints on moments of the observations conditional on the latent variables. The performance of the model is investigated in a simulation example using data on finite dimensional landmark manifolds....

Assigning breed origin to alleles in crossbred animals.

Science.gov (United States)

Vandenplas, Jérémie; Calus, Mario P L; Sevillano, Claudia A; Windig, Jack J; Bastiaansen, John W M

2016-08-22

For some species, animal production systems are based on the use of crossbreeding to take advantage of the increased performance of crossbred compared to purebred animals. Effects of single nucleotide polymorphisms (SNPs) may differ between purebred and crossbred animals for several reasons: (1) differences in linkage disequilibrium between SNP alleles and a quantitative trait locus; (2) differences in genetic backgrounds (e.g., dominance and epistatic interactions); and (3) differences in environmental conditions, which result in genotype-by-environment interactions. Thus, SNP effects may be breed-specific, which has led to the development of genomic evaluations for crossbred performance that take such effects into account. However, to estimate breed-specific effects, it is necessary to know breed origin of alleles in crossbred animals. Therefore, our aim was to develop an approach for assigning breed origin to alleles of crossbred animals (termed BOA) without information on pedigree and to study its accuracy by considering various factors, including distance between breeds. The BOA approach consists of: (1) phasing genotypes of purebred and crossbred animals; (2) assigning breed origin to phased haplotypes; and (3) assigning breed origin to alleles of crossbred animals based on a library of assigned haplotypes, the breed composition of crossbred animals, and their SNP genotypes. The accuracy of allele assignments was determined for simulated datasets that include crosses between closely-related, distantly-related and unrelated breeds. Across these scenarios, the percentage of alleles of a crossbred animal that were correctly assigned to their breed origin was greater than 90 %, and increased with increasing distance between breeds, while the percentage of incorrectly assigned alleles was always less than 2 %. For the remaining alleles, i.e. 0 to 10 % of all alleles of a crossbred animal, breed origin could not be assigned. The BOA approach accurately assigns

DEVELOPMENT OF UAV PHOTOGRAMMETRY METHOD BY USING SMALL NUMBER OF VERTICAL IMAGES

Directory of Open Access Journals (Sweden)

Y. Kunii

2018-05-01

Full Text Available This new and efficient photogrammetric method for unmanned aerial vehicles (UAVs requires only a few images taken in the vertical direction at different altitudes. The method includes an original relative orientation procedure which can be applied to images captured along the vertical direction. The final orientation determines the absolute orientation for every parameter and is used for calculating the 3D coordinates of every measurement point. The measurement accuracy was checked at the UAV test site of the Japan Society for Photogrammetry and Remote Sensing. Five vertical images were taken at 70 to 90 m altitude. The 3D coordinates of the measurement points were calculated. The plane and height accuracies were ±0.093 m and ±0.166 m, respectively. These values are of higher accuracy than the results of the traditional photogrammetric method. The proposed method can measure 3D positions efficiently and would be a useful tool for construction and disaster sites and for other field surveying purposes.

Recently developed methods in neutral-particle transport calculations: overview

International Nuclear Information System (INIS)

Alcouffe, R.E.

1982-01-01

It has become increasingly apparent that successful, general methods for the solution of the neutral particle transport equation involve a close connection between the spatial-discretization method used and the source-acceleration method chosen. The first form of the transport equation, angular discretization which is discrete ordinates is considered as well as spatial discretization based upon a mesh arrangement. Characteristic methods are considered briefly in the context of future, desirable developments. The ideal spatial-discretization method is described as having the following attributes: (1) positive-positive boundary data yields a positive angular flux within the mesh including its boundaries; (2) satisfies the particle balance equation over the mesh, that is, the method is conservative; (3) possesses the diffusion limit independent of spatial mesh size, that is, for a linearly isotropic flux assumption, the transport differencing reduces to a suitable diffusion equation differencing; (4) the method is unconditionally acceleratable, i.e., for each mesh size, the method is unconditionally convergent with a source iteration acceleration. It is doubtful that a single method possesses all these attributes for a general problem. Some commonly used methods are outlined and their computational performance and usefulness are compared; recommendations for future development are detailed, which include practical computational considerations

METHODIC OF DEVELOPMENT OF MOTOR GIFTEDNESS OF PRESCHOOL CHILDREN

Directory of Open Access Journals (Sweden)

Светлана Юрьевна Федорова

2013-05-01

Full Text Available Education and training of gifted children today appropriate to consider as an important strategic task of modern society. In this context, the purpose of research is the development motor giftedness, which is particularly relevant at the stage of pre-school education, which is caused by age-preschoolers. Preschoolers' motor giftedness is considered by the author as developing integrated quality, including psychomotor skills, inclinations, increased motivation for motor activity. In the process of study the following methods are used:  the study and analysis of the scientific and methodological literature on studies, questioning, interview, testing of physical fitness, statistical data processing.The result of research work is methodic of development of motor giftedness on physical education in preschool. The author's methodic consists of four steps:  diagnostic, prognostic, practice and activity, social and pedagogical. Each step determines the inclusion of preschool children in sports and developing environment that meets his or her abilities and needs through the creation of certain social and educational conditions.The area of using results of the author's methodic is preschool and the system of improvement professional skill of teachers. DOI: http://dx.doi.org/10.12731/2218-7405-2013-4-31

Original antigenic sin responses to influenza viruses.

Science.gov (United States)

Kim, Jin Hyang; Skountzou, Ioanna; Compans, Richard; Jacob, Joshy

2009-09-01

Most immune responses follow Burnet's rule in that Ag recruits specific lymphocytes from a large repertoire and induces them to proliferate and differentiate into effector cells. However, the phenomenon of "original antigenic sin" stands out as a paradox to Burnet's rule of B cell engagement. Humans, upon infection with a novel influenza strain, produce Abs against older viral strains at the expense of responses to novel, protective antigenic determinants. This exacerbates the severity of the current infection. This blind spot of the immune system and the redirection of responses to the "original Ag" rather than to novel epitopes were described fifty years ago. Recent reports have questioned the existence of this phenomenon. Hence, we revisited this issue to determine the extent to which original antigenic sin is induced by variant influenza viruses. Using two related strains of influenza A virus, we show that original antigenic sin leads to a significant decrease in development of protective immunity and recall responses to the second virus. In addition, we show that sequential infection of mice with two live influenza virus strains leads to almost exclusive Ab responses to the first viral strain, suggesting that original antigenic sin could be a potential strategy by which variant influenza viruses subvert the immune system.

Feature selection and recognition from nonspecific volatile profiles for discrimination of apple juices according to variety and geographical origin.

Science.gov (United States)

Guo, Jing; Yue, Tianli; Yuan, Yahong

2012-10-01

Apple juice is a complex mixture of volatile and nonvolatile components. To develop discrimination models on the basis of the volatile composition for an efficient classification of apple juices according to apple variety and geographical origin, chromatography volatile profiles of 50 apple juice samples belonging to 6 varieties and from 5 counties of Shaanxi (China) were obtained by headspace solid-phase microextraction coupled with gas chromatography. The volatile profiles were processed as continuous and nonspecific signals through multivariate analysis techniques. Different preprocessing methods were applied to raw chromatographic data. The blind chemometric analysis of the preprocessed chromatographic profiles was carried out. Stepwise linear discriminant analysis (SLDA) revealed satisfactory discriminations of apple juices according to variety and geographical origin, provided respectively 100% and 89.8% success rate in terms of prediction ability. Finally, the discriminant volatile compounds selected by SLDA were identified by gas chromatography-mass spectrometry. The proposed strategy was able to verify the variety and geographical origin of apple juices involving only a reduced number of discriminate retention times selected by the stepwise procedure. This result encourages the similar procedures to be considered in quality control of apple juices. This work presented a method for an efficient discrimination of apple juices according to apple variety and geographical origin using HS-SPME-GC-MS together with chemometric tools. Discrimination models developed could help to achieve greater control over the quality of the juice and to detect possible adulteration of the product. © 2012 Institute of Food Technologists®

Development of efficient time-evolution method based on three-term recurrence relation

International Nuclear Information System (INIS)

Akama, Tomoko; Kobayashi, Osamu; Nanbu, Shinkoh

2015-01-01

The advantage of the real-time (RT) propagation method is a direct solution of the time-dependent Schrödinger equation which describes frequency properties as well as all dynamics of a molecular system composed of electrons and nuclei in quantum physics and chemistry. Its applications have been limited by computational feasibility, as the evaluation of the time-evolution operator is computationally demanding. In this article, a new efficient time-evolution method based on the three-term recurrence relation (3TRR) was proposed to reduce the time-consuming numerical procedure. The basic formula of this approach was derived by introducing a transformation of the operator using the arcsine function. Since this operator transformation causes transformation of time, we derived the relation between original and transformed time. The formula was adapted to assess the performance of the RT time-dependent Hartree-Fock (RT-TDHF) method and the time-dependent density functional theory. Compared to the commonly used fourth-order Runge-Kutta method, our new approach decreased computational time of the RT-TDHF calculation by about factor of four, showing the 3TRR formula to be an efficient time-evolution method for reducing computational cost

Fast sweeping method for the factored eikonal equation

Science.gov (United States)

Fomel, Sergey; Luo, Songting; Zhao, Hongkai

2009-09-01

We develop a fast sweeping method for the factored eikonal equation. By decomposing the solution of a general eikonal equation as the product of two factors: the first factor is the solution to a simple eikonal equation (such as distance) or a previously computed solution to an approximate eikonal equation. The second factor is a necessary modification/correction. Appropriate discretization and a fast sweeping strategy are designed for the equation of the correction part. The key idea is to enforce the causality of the original eikonal equation during the Gauss-Seidel iterations. Using extensive numerical examples we demonstrate that (1) the convergence behavior of the fast sweeping method for the factored eikonal equation is the same as for the original eikonal equation, i.e., the number of iterations for the Gauss-Seidel iterations is independent of the mesh size, (2) the numerical solution from the factored eikonal equation is more accurate than the numerical solution directly computed from the original eikonal equation, especially for point sources.

Development of a Research Methods and Statistics Concept Inventory

Science.gov (United States)

Veilleux, Jennifer C.; Chapman, Kate M.

2017-01-01

Research methods and statistics are core courses in the undergraduate psychology major. To assess learning outcomes, it would be useful to have a measure that assesses research methods and statistical literacy beyond course grades. In two studies, we developed and provided initial validation results for a research methods and statistical knowledge…

Selecting Cooking Methods to Decrease Persistent Organic Pollutant Concentrations in Food of Animal Origin Using a Consensus Decision-Making Model

Directory of Open Access Journals (Sweden)

Xiao Tan

2017-02-01

Full Text Available Persistent organic pollutants (POPs pose serious threats to human health. Increasing attention has been paid to POPs to protect the environment and prevent disease. Humans are exposed to POPs through diet (the major route, inhaling air and dust and skin contact. POPs are very lipophilic and hydrophobic, meaning that they accumulate in fatty tissues in animals and can biomagnify. Humans can therefore be exposed to relatively high POP concentrations in food of animal origin. Cooking animal products can decrease the POP contents, and different cooking methods achieve different reduction rates. Here, a consensus decision-making model with interval preference relations is used to prioritize cooking methods for specific animal products in terms of reducing POP concentrations. Two consistency mathematical expressions (I-consistency and I I -consistency are defined, then the ideal interval preference relations are determined for the cooking methods with respect to different social choice principles. The objective is to minimize disparities between individual judgments and the ideal consensus judgment. Consistency is used as a constraint to determine the rationality of the consistency definitions. A numerical example indicated that baking is the best cooking method for decreasing POP concentrations in grass carp. The I-consistency results were more acceptable than the I I -consistency results.

Selecting Cooking Methods to Decrease Persistent Organic Pollutant Concentrations in Food of Animal Origin Using a Consensus Decision-Making Model.

Science.gov (United States)

Tan, Xiao; Gong, Zaiwu; Huang, Minji; Wang, Zhou-Jing

2017-02-14

Persistent organic pollutants (POPs) pose serious threats to human health. Increasing attention has been paid to POPs to protect the environment and prevent disease. Humans are exposed to POPs through diet (the major route), inhaling air and dust and skin contact. POPs are very lipophilic and hydrophobic, meaning that they accumulate in fatty tissues in animals and can biomagnify. Humans can therefore be exposed to relatively high POP concentrations in food of animal origin. Cooking animal products can decrease the POP contents, and different cooking methods achieve different reduction rates. Here, a consensus decision-making model with interval preference relations is used to prioritize cooking methods for specific animal products in terms of reducing POP concentrations. Two consistency mathematical expressions ( I -consistency and I I -consistency) are defined, then the ideal interval preference relations are determined for the cooking methods with respect to different social choice principles. The objective is to minimize disparities between individual judgments and the ideal consensus judgment. Consistency is used as a constraint to determine the rationality of the consistency definitions. A numerical example indicated that baking is the best cooking method for decreasing POP concentrations in grass carp. The I -consistency results were more acceptable than the I I -consistency results.

Forward-Looking Planning of Technology Development

Directory of Open Access Journals (Sweden)

Katarzyna Halicka

2015-12-01

Full Text Available The main aim of this article is to adapt the Future-Oriented Technology Analysis (FTA to prospective planning of technology development. Firstly, the article presents the assumptions, methods and idea, as well as the concept of the FTA method. Moreover, selected publications on the use of this method were analysed. Then, an original, base model of forward-looking planning of technology development was constructed and presented. The end result of this process will be the development of the localized in time, presented in graphic form, action plan referred to as the route of technology development. Basing on the literature review and the research projects a preliminary route of development of arbitrarily chosen technology was also built and presented.

The Centennial of Counselor Education: Origin and Early Development of a Discipline

Science.gov (United States)

Savickas, Mark L.

2011-01-01

July 7, 2011, marks the centennial of counselor education as a formal discipline. In recognition of its 100th birthday, the author of this article describes the origins of the discipline, beginning with its prehistory in the work of Frank Parsons to establish the practice of vocational guidance, describing the 1st course in counselor education at…

The effect of cutting origin and organic plant growth regulator on the growth of Daun Ungu (Graptophyllum pictum) through stem cutting method

Science.gov (United States)

Pratama, S. P.; Yunus, A.; Purwanto, E.; Widyastuti, Y.

2018-03-01

Graptophyllum pictum is one of medical plants which has important chemical content to treat diseases. Leaf, bark and flower can be used to facilitate menstruation, treat hemorrhoid, constipation, ulcers, ulcers, swelling, and earache. G. pictum is difficult to propagated by seedling due to the long duration of seed formation, thusvegetative propagation is done by stem cutting. The aims of this study are to obtain optimum combination of cutting origin and organic plant growth regulator in various consentration for the growth of Daun Ungu through stem cutting method. This research was conducted at Research center for Medicinal Plant and Traditional DrugTanjungsari, Tegal Gede, Karanganyar in June to August 2016. Origin of cuttings and organic plant growth regulator were used as treatments factor. A completely randomized design (RAL) is used and data were analyzed by F test (ANOVA) with a confidence level of 95%. Any significant differences among treatment followed with Duncan test at a = 5%. The research indicates that longest root was resulted from the treatment of 0,5 ml/l of organic plant growth regulator. The treatment of 1 ml/l is able to increase the fresh and dry weight of root, treatment of 1,5 ml/l of organic plant growth regulator was able to increase the percentage of growing shoots. Treatment of base part as origin of cuttings increases the length, fresh weight and and dry weight of shoot, increase the number of leaves. Interaction treatment between 1 ml/l consentration of organic plant growth regulator and central part origin of cuttings is capable of increasing the leaf area, whereas treatment without organic plant growth regulator and base part as planting material affects the smallest leaf area.

Developing Teaching Material Software Assisted for Numerical Methods

Science.gov (United States)

Handayani, A. D.; Herman, T.; Fatimah, S.

2017-09-01

The NCTM vision shows the importance of two things in school mathematics, which is knowing the mathematics of the 21st century and the need to continue to improve mathematics education to answer the challenges of a changing world. One of the competencies associated with the great challenges of the 21st century is the use of help and tools (including IT), such as: knowing the existence of various tools for mathematical activity. One of the significant challenges in mathematical learning is how to teach students about abstract concepts. In this case, technology in the form of mathematics learning software can be used more widely to embed the abstract concept in mathematics. In mathematics learning, the use of mathematical software can make high level math activity become easier accepted by student. Technology can strengthen student learning by delivering numerical, graphic, and symbolic content without spending the time to calculate complex computing problems manually. The purpose of this research is to design and develop teaching materials software assisted for numerical method. The process of developing the teaching material starts from the defining step, the process of designing the learning material developed based on information obtained from the step of early analysis, learners, materials, tasks that support then done the design step or design, then the last step is the development step. The development of teaching materials software assisted for numerical methods is valid in content. While validator assessment for teaching material in numerical methods is good and can be used with little revision.

Development of the modified sum-peak method and its application

International Nuclear Information System (INIS)

Ogata, Y.; Miyahara, H.; Ishihara, M.; Ishigure, N.; Yamamoto, S.; Kojima, S.

2016-01-01

As the sum-peak method requires the total count rate as well as the peak count rates and the sum peak count rate, this meets difficulties when a sample contains other radionuclides than the one to be measured. To solve the problem, a new method using solely the peak and the sum peak count rates was developed. The method was theoretically and experimentally confirmed using "6"0Co, "2"2Na and "1"3"4Cs. We demonstrate that the modified sum-peak method is quite simple and practical and is useful to measure multiple nuclides. - Highlights: • A modified sum-peak method for simple radioactivity measurement was developed. • The method solely requires the peak count rates and the sum peak count rate. • The method is applicable to multiple radionuclides.

Revitalisation as a Method of Planning Sustainable Development of Old Town Complexes in Historic Towns

Science.gov (United States)

Zagroba, Marek; Gawryluk, Dorota

2017-12-01

which they were reconstructed afterwards. In consequence, some elements of the original town master plans have been lost. Revitalisation is an approach whose aim is to improve the quality of space and the ability of inner town areas to function. Revitalisation goes beyond the purely spatial factors, and involves broadly understood economic and social considerations. The conclusions drawn from this research pertain to benefits of using the revitalisation method in planning a sustainable development of urban structures. The development and implementation of revitalisation programmes is a very complex process that takes many years and requires an integrated and interdisciplinary team effort. This method allows us to preserve the identity of historic town areas while enabling them to play functions in the contemporary life of a town.

Potential of electric discharge plasma methods in abatement of volatile organic compounds originating from the food industry.

Science.gov (United States)

Preis, S; Klauson, D; Gregor, A

2013-01-15

Increased volatile organic compounds emissions and commensurate tightening of applicable legislation mean that the development and application of effective, cost-efficient abatement methods are areas of growing concern. This paper reviews the last two decades' publications on organic vapour emissions from food processing, their sources, impacts and treatment methods. An overview of the latest developments in conventional air treatment methods is presented, followed by the main focus of the paper, non-thermal plasma technology. The results of the review suggest that non-thermal plasma technology, in its pulsed corona discharge configuration, is an emerging treatment method with potential for low-cost, effective abatement of a wide spectrum of organic air pollutants. It is found that the combination of plasma treatment with catalysis is a development trend that demonstrates considerable potential. The as yet relatively small number of plasma treatment applications is considered to be due to the novelty of pulsed electric discharge techniques and a lack of reliable pulse generators and reactors. Other issues acting as barriers to widespread adoption of the technique include the possible formation of stable oxidation by-products, residual ozone and nitrogen oxides, and sensitivity towards air humidity. Copyright © 2012 Elsevier Ltd. All rights reserved.

Original Misunderstanding

Science.gov (United States)

Holtzman, Alexander

2009-01-01

Humorist Josh Billings quipped, "About the most originality that any writer can hope to achieve honestly is to steal with good judgment." Billings was harsh in his view of originality, but his critique reveals a tension faced by students every time they write a history paper. Research is the essence of any history paper. Especially in high school,…

Developing a TQM quality management method model

NARCIS (Netherlands)

Zhang, Zhihai

1997-01-01

From an extensive review of total quality management literature, the external and internal environment affecting an organization's quality performance and the eleven primary elements of TQM are identified. Based on the primary TQM elements, a TQM quality management method model is developed. This

ORIGINAL ARTICLE Fitted-Stable Finite Difference Method for ...

African Journals Online (AJOL)

Gemechis

two point boundary value problems with the boundary layer at one end (left or right) ... scheme (SCD Method) and its value is obtained using the theory of singular ..... Eq. (15) at the point. N iih xxi. , ,2 ,1 ,0 ,.. = = = and taking the limit as. 0. →.

Origins, Methods and Advances in Qualitative Meta-Synthesis

Science.gov (United States)

Nye, Elizabeth; Melendez-Torres, G. J.; Bonell, Chris

2016-01-01

Qualitative research is a broad term encompassing many methods. Critiques of the field of qualitative research argue that while individual studies provide rich descriptions and insights, the absence of connections drawn between studies limits their usefulness. In response, qualitative meta-synthesis serves as a design to interpret and synthesise…

Manual of selected physico-chemical analytical methods. IV

International Nuclear Information System (INIS)

Beran, M.; Klosova, E.; Krtil, J.; Sus, F.; Kuvik, V.; Vrbova, L.; Hamplova, M.; Lengyel, J.; Kelnar, L.; Zakouril, K.

1990-11-01

The Central Testing Laboratory of the Nuclear Research Institute at Rez has for a decade been participating in the development of analytical procedures and has been providing analyses of samples of different types and origin. The analytical procedures developed have been published in special journals and a number of them in the Manuals of analytical methods, in three parts. The 4th part of the Manual contains selected physico-chemical methods developed or modified by the Laboratory in the years 1986-1990 within the project ''Development of physico-chemical analytical methods''. In most cases, techniques are involved for non-nuclear applications. Some can find wider applications, especially in analyses of environmental samples. Others have been developed for specific cases of sample analyses or require special instrumentation (mass spectrometer), which partly restricts their applicability by other institutions. (author)

Recent development of the passive vibration control method

Science.gov (United States)

Ishida, Yukio

2012-05-01

This paper introduces new passive vibration suppression methods developed recently in our laboratory. First, two methods used to suppress steady-state resonances are explained. One is the improvement of the efficiency of a ball balancer. A simple method to eliminate the influence of friction of balls and to improve its efficiency is introduced. The other is an effective method that utilizes the discontinuous spring characteristics. Secondly, a method to eliminate unstable ranges in rotor systems is explained. Unstable ranges in an asymmetrical shaft, and in a hollow rotor partially filled with liquid, are eliminated by the discontinuous spring characteristics. Thirdly, a method to suppress self-excited oscillations is explained. Self-excited oscillations due to internal damping and rubbing are discussed. Finally, the methods of using a pendulum or roller type absorbers to suppress torsional vibrations are explained.

Quantitative methods for developing C2 system requirement

Energy Technology Data Exchange (ETDEWEB)

Tyler, K.K.

1992-06-01

The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the communications gap'' between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

ORIGINAL ARTICLE An Assessment of Mathematics Classroom ...

African Journals Online (AJOL)

Bdu

ORIGINAL ARTICLE. An Assessment of Mathematics Classroom Teaching- ... the study was to assess whether the learning classroom environment was compliant with constructivism. ... of our education system. Applefield ... share control of the design, management, and evaluation ..... development of formative assessment.

Identifying sites of replication initiation in yeast chromosomes: looking for origins in all the right places.

Science.gov (United States)

van Brabant, A J; Hunt, S Y; Fangman, W L; Brewer, B J

1998-06-01

DNA fragments that contain an active origin of replication generate bubble-shaped replication intermediates with diverging forks. We describe two methods that use two-dimensional (2-D) agarose gel electrophoresis along with DNA sequence information to identify replication origins in natural and artificial Saccharomyces cerevisiae chromosomes. The first method uses 2-D gels of overlapping DNA fragments to locate an active chromosomal replication origin within a region known to confer autonomous replication on a plasmid. A variant form of 2-D gels can be used to determine the direction of fork movement, and the second method uses this technique to find restriction fragments that are replicated by diverging forks, indicating that a bidirectional replication origin is located between the two fragments. Either of these two methods can be applied to the analysis of any genomic region for which there is DNA sequence information or an adequate restriction map.

Origins of strabismus and loss of binocular vision

Science.gov (United States)

Bui Quoc, Emmanuel; Milleret, Chantal

2014-01-01

Strabismus is a frequent ocular disorder that develops early in life in humans. As a general rule, it is characterized by a misalignment of the visual axes which most often appears during the critical period of visual development. However other characteristics of strabismus may vary greatly among subjects, for example, being convergent or divergent, horizontal or vertical, with variable angles of deviation. Binocular vision may also vary greatly. Our main goal here is to develop the idea that such “polymorphy” reflects a wide variety in the possible origins of strabismus. We propose that strabismus must be considered as possibly resulting from abnormal genetic and/or acquired factors, anatomical and/or functional abnormalities, in the sensory and/or the motor systems, both peripherally and/or in the brain itself. We shall particularly develop the possible “central” origins of strabismus. Indeed, we are convinced that it is time now to open this “black box” in order to move forward. All of this will be developed on the basis of both presently available data in literature (including most recent data) and our own experience. Both data in biology and medicine will be referred to. Our conclusions will hopefully help ophthalmologists to better understand strabismus and to develop new therapeutic strategies in the future. Presently, physicians eliminate or limit the negative effects of such pathology both on the development of the visual system and visual perception through the use of optical correction and, in some cases, extraocular muscle surgery. To better circumscribe the problem of the origins of strabismus, including at a cerebral level, may improve its management, in particular with respect to binocular vision, through innovating tools by treating the pathology at the source. PMID:25309358

Laser triangulation method for measuring the size of parking claw

Science.gov (United States)

Liu, Bo; Zhang, Ming; Pang, Ying

2017-10-01

With the development of science and technology and the maturity of measurement technology, the 3D profile measurement technology has been developed rapidly. Three dimensional measurement technology is widely used in mold manufacturing, industrial inspection, automatic processing and manufacturing, etc. There are many kinds of situations in scientific research and industrial production. It is necessary to transform the original mechanical parts into the 3D data model on the computer quickly and accurately. At present, many methods have been developed to measure the contour size, laser triangulation is one of the most widely used methods.

Switching from originator brand medicines to generic equivalents in selected developing countries: how much could be saved?

Science.gov (United States)

Cameron, Alexandra; Mantel-Teeuwisse, Aukje K; Leufkens, Hubert G M; Laing, Richard Ogilvie

2012-01-01

In low- and middle-income countries, patients and reimbursement agencies that purchase medicines in the private sector pay more for originator brands when generic equivalents exist. We estimated the savings that could be obtained from a hypothetical switch in medicine consumption from originator brands to lowest-priced generic equivalents for a selection of medicines in 17 countries. In this cost minimization analysis, the prices of originator brands and their lowest-priced generic equivalents were obtained from facility-based surveys conducted by using a standard methodology. Fourteen medicines most commonly included in the surveys, plus three statins, were included in the analysis. For each medicine, the volume of private sector consumption of the originator brand product was obtained from IMS Health, Inc. Volumes were applied to the median unit prices for both originator brands and their lowest-priced generics to estimate cost savings. Prices were adjusted to 2008 by using consumer price index data and were adjusted for purchasing power parity. For the medicines studied, an average of 9% to 89% could be saved by an individual country from a switch in private sector purchases from originator brands to lowest-priced generics. In public hospitals in China, US $ 370 million could be saved from switching only four medicines, saving an average of 65%. Across individual medicines, average potential savings ranged from 11% for beclometasone inhaler to 73% for ceftriaxone injection. Substantial savings could be achieved by switching private sector purchases from originator brand medicines to lowest-priced generic equivalents. Strategies to promote generic uptake, such as generic substitution by pharmacists and increasing confidence in generics by professionals and the public, should be included in national medicines policies. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Valuing Information on GM Foods in the Presence of Country-of-Origin Labels

OpenAIRE

Jing Xie; Hyeyoung Kim; Lisa House

2013-01-01

Information on production methods (genetic modification (GM) or organic production) and locations (country of origin) are commonly found on food package labels. Both pieces of information may be used as a proxy for food safety and (perceived) quality by consumers. Our study investigates the interactive effects between information on production method and country-of-origin labeling (COOL) by conducting choice experiments in the European Union, United States and Japan. This study also investig...

Development of methods for body composition studies

International Nuclear Information System (INIS)

Mattsson, Soeren; Thomas, Brian J

2006-01-01

This review is focused on experimental methods for determination of the composition of the human body, its organs and tissues. It summarizes the development and current status of fat determinations from body density, total body water determinations through the dilution technique, whole and partial body potassium measurements for body cell mass estimates, in vivo neutron activation analysis for body protein measurements, dual-energy absorptiometry (DEXA), computed tomography (CT) and magnetic resonance imaging (MRI, fMRI) and spectroscopy (MRS) for body composition studies on tissue and organ levels, as well as single- and multiple-frequency bioimpedance (BIA) and anthropometry as simple easily available methods. Methods for trace element analysis in vivo are also described. Using this wide range of measurement methods, together with gradually improved body composition models, it is now possible to quantify a number of body components and follow their changes in health and disease. (review)

Development of methods for body composition studies

Energy Technology Data Exchange (ETDEWEB)

Mattsson, Soeren [Department of Radiation Physics, Lund University, Malmoe University Hospital, SE-205 02 Malmoe (Sweden); Thomas, Brian J [School of Physical and Chemical Sciences, Queensland University of Technology, Brisbane, QLD 4001 (Australia)

2006-07-07

This review is focused on experimental methods for determination of the composition of the human body, its organs and tissues. It summarizes the development and current status of fat determinations from body density, total body water determinations through the dilution technique, whole and partial body potassium measurements for body cell mass estimates, in vivo neutron activation analysis for body protein measurements, dual-energy absorptiometry (DEXA), computed tomography (CT) and magnetic resonance imaging (MRI, fMRI) and spectroscopy (MRS) for body composition studies on tissue and organ levels, as well as single- and multiple-frequency bioimpedance (BIA) and anthropometry as simple easily available methods. Methods for trace element analysis in vivo are also described. Using this wide range of measurement methods, together with gradually improved body composition models, it is now possible to quantify a number of body components and follow their changes in health and disease. (review)

Development of a transient criticality evaluation method

International Nuclear Information System (INIS)

Pain, C.C.; Eaton, M.D.; Miles, B.; Ziver, A.K.; Gomes, J.L.M.A.; Umpleby, A.P.; Piggott, M.D.; Goddard, A.J.H.; Oliveira, C.R.E. de

2005-01-01

In developing a transient criticality evaluation method we model, in full spatial/temporal detail, the neutron fluxes and consequent power and the evolving material properties - their flows, energies, phase changes etc. These methods are embodied in the generic method FETCH code which is based as far as possible on basic principles and is capable of use in exploring safety-related situations somewhat beyond the range of experiment. FETCH is a general geometry code capable of addressing a range of criticality issues in fissile materials. The code embodies both transient radiation transport and transient fluid dynamics. Work on powders, granular materials, porous media and solutions is reviewed. The capability for modelling transient criticality for chemical plant, waste matrices and advanced reactors is also outlined. (author)

Quality functions for requirements engineering in system development methods.

Science.gov (United States)

Johansson, M; Timpka, T

1996-01-01

Based on a grounded theory framework, this paper analyses the quality characteristics for methods to be used for requirements engineering in the development of medical decision support systems (MDSS). The results from a Quality Function Deployment (QFD) used to rank functions connected to user value and a focus group study were presented to a validation focus group. The focus group studies take advantage of a group process to collect data for further analyses. The results describe factors considered by the participants as important in the development of methods for requirements engineering in health care. Based on the findings, the content which, according to the user a MDSS method should support is established.

Application of best-worst method in evaluation of medical tourism development strategy

OpenAIRE

Farzaneh Abouhashem Abadi; Iman Ghasemian Sahebi; Alireza Arab; Abbas Alavi; Hedieh Karachi

2018-01-01

Medical tourism industry is an international phenomenon, which most of medical tourists for some reasons such as high costs of treatment, long waiting queues, lack of insurance and lack of access to health care in the origin country, travel long distances to benefit from health care services of destination country. Given the competitive nature of this industry, most countries are designing practical and legal services and planning for their development. For this purpose, this study has been c...

Methods for Developing Emissions Scenarios for Integrated Assessment Models

Energy Technology Data Exchange (ETDEWEB)

Prinn, Ronald [MIT; Webster, Mort [MIT

2007-08-20

The overall objective of this research was to contribute data and methods to support the future development of new emissions scenarios for integrated assessment of climate change. Specifically, this research had two main objectives: 1. Use historical data on economic growth and energy efficiency changes, and develop probability density functions (PDFs) for the appropriate parameters for two or three commonly used integrated assessment models. 2. Using the parameter distributions developed through the first task and previous work, we will develop methods of designing multi-gas emission scenarios that usefully span the joint uncertainty space in a small number of scenarios. Results on the autonomous energy efficiency improvement (AEEI) parameter are summarized, an uncertainty analysis of elasticities of substitution is described, and the probabilistic emissions scenario approach is presented.

Feather development genes and associated regulatory innovation predate the origin of Dinosauria.

Science.gov (United States)

Lowe, Craig B; Clarke, Julia A; Baker, Allan J; Haussler, David; Edwards, Scott V

2015-01-01

The evolution of avian feathers has recently been illuminated by fossils and the identification of genes involved in feather patterning and morphogenesis. However, molecular studies have focused mainly on protein-coding genes. Using comparative genomics and more than 600,000 conserved regulatory elements, we show that patterns of genome evolution in the vicinity of feather genes are consistent with a major role for regulatory innovation in the evolution of feathers. Rates of innovation at feather regulatory elements exhibit an extended period of innovation with peaks in the ancestors of amniotes and archosaurs. We estimate that 86% of such regulatory elements and 100% of the nonkeratin feather gene set were present prior to the origin of Dinosauria. On the branch leading to modern birds, we detect a strong signal of regulatory innovation near insulin-like growth factor binding protein (IGFBP) 2 and IGFBP5, which have roles in body size reduction, and may represent a genomic signature for the miniaturization of dinosaurian body size preceding the origin of flight. © The Author 2014. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Examining the hemagglutinin subtype diversity among wild duck-origin influenza A viruses using ethanol-fixed cloacal swabs and a novel RT-PCR method.

Science.gov (United States)

Wang, Ruixue; Soll, Lindsey; Dugan, Vivien; Runstadler, Jonathan; Happ, George; Slemons, Richard D; Taubenberger, Jeffery K

2008-05-25

This study presents an interconnected approach for circumventing two inherent limitations associated with studies defining the natural history of influenza A viruses in wild birds. The first limiting factor is the ability to maintain a cold chain from specimen collection to the laboratory when study sites are in more remote locations. The second limiting factor is the ability to identify all influenza A virus HA subtypes present in an original sample. We report a novel method for molecular subtyping of avian influenza A virus hemagglutinin genes using degenerate primers designed to amplify all known hemagglutinin subtypes. It was shown previously that templates larger than 200 bp were not consistently amplifiable from ethanol-fixed cloacal swabs. For this study, new primer sets were designed within these constraints. This method was used to perform subtyping RT-PCR on 191 influenza RNA-positive ethanol-fixed cloacal swabs obtained from 880 wild ducks in central Alaska in 2005. Seven different co-circulating hemagglutinin subtypes were identified in this study set, including H1, H3, H4, H5, H6, H8, and H12. In addition, 16% of original cloacal samples showed evidence of mixed infection, with samples yielding from two-to-five different hemagglutinin subtypes. This study further demonstrates the complex ecobiology of avian influenza A viruses in wild birds.

Object Oriented Modeling : A method for combining model and software development

NARCIS (Netherlands)

Van Lelyveld, W.

2010-01-01

When requirements for a new model cannot be met by available modeling software, new software can be developed for a specific model. Methods for the development of both model and software exist, but a method for combined development has not been found. A compatible way of thinking is required to

The Development of the TPR-DB as Grounded Theory Method

DEFF Research Database (Denmark)

Carl, Michael; Schaeffer, Moritz

2018-01-01

and refine the emerging concepts and categories and to validate the developing theories, the TPR-DB has been extended with further translation studies in different languages and translation modes. In this respect, it shares many features with Grounded Theory Method. This method was discovered in 1967...... and used in qualitative research in social science ad many other research areas. We analyze the TPR-DB development as a Grounded Theory Method....... on quantitative assessment of well-defined research questions on cognitive processes in human translation production, the integration of the data into the TPR-DB allowed for broader qualitative and exploratory research which has led to new codes, categories and research themes. In a constant effort to develop...

The phenomenological method in qualitative psychology and psychiatry.

Science.gov (United States)

Englander, Magnus

2016-01-01

This article will closely examine the phenomenological method as applied to qualitative inquiry in psychology and psychiatry. In a critical comparison between Amedeo Giorgi's and Larry Davidson's qualitatively methods, conclusions were drawn with regard to how different kinds of qualitative inquiry are possible while remaining faithful to Husserlian philosophical foundations. Utilizing Lester Embree's recent articulation of how Husserl's method of the epochē can be disclosed as specific to a discipline, varieties of these two qualitative methods were seen in their relation to the original scientific aim instigated by the developer.

The phenomenological method in qualitative psychology and psychiatry

Directory of Open Access Journals (Sweden)

Magnus Englander

2016-03-01

Full Text Available This article will closely examine the phenomenological method as applied to qualitative inquiry in psychology and psychiatry. In a critical comparison between Amedeo Giorgi's and Larry Davidson's qualitatively methods, conclusions were drawn with regard to how different kinds of qualitative inquiry are possible while remaining faithful to Husserlian philosophical foundations. Utilizing Lester Embree's recent articulation of how Husserl's method of the epochē can be disclosed as specific to a discipline, varieties of these two qualitative methods were seen in their relation to the original scientific aim instigated by the developer.

Development of nondestructive evaluation methods for ceramic coatings

International Nuclear Information System (INIS)

Ellingson, W. A.; Deemer, C.; Sun, J. G.; Erdman, S.; Muliere, D.; Wheeler, B.

2002-01-01

Various nondestructive evaluation (NDE) technologies are being developed to study the use of ceramic coatings on components in the hot-gas path of advanced low-emission gas-fired turbines. The types of ceramic coatings include thermal barrier coatings (TBCs) and environmental barrier coatings (EBCs). TBCs are under development for vanes, blades, and combustor liners to allow hotter gas-path temperatures, and EBCs are under development to reduce environmental damage to high-temperature components made of ceramic matrix composites. The NDE methods will be used to (a) provide data to assess the reliability of new coating application processes, (b) identify defective components that could cause unscheduled outages, (c) track growth rates of defects during component use in engines, and (d) allow rational judgment for replace/repair/re-use decisions regarding components. Advances in TBC application, both electron beam-physical vapor deposition (EB-PVD) and air plasma spraying (APS), are allowing higher temperatures in the hot-gas path. However, as TBCs become ''prime reliant,'' their condition at scheduled or unscheduled outages must be known. NDE methods are under development to assess the condition of the TBC for pre-spall conditions. EB-PVD test samples with up to 70 thermal cycles have been studied by a newly developed method involving polarized laser back-scatter NDE. Results suggest a correlation between the NDE laser data and the TBC/bond-coat topography. This finding is important because several theories directed toward understanding the pre-spall condition suggest that the topography in the thermally grown oxide layer changes significantly as a function of the number of thermal cycles. Tests have also been conducted with this NDE method on APS TBCs. Results suggest that the pre-spall condition is detected for these coatings. One-sided, high-speed thermal imaging also has shown promise for NDE of APS coatings. Testing of SiC/SiC composites for combustor liners

Neutronics methods for thermal radiative transfer

International Nuclear Information System (INIS)

Larsen, E.W.

1988-01-01

The equations of thermal radiative transfer are time discretized in a semi-implicit manner, yielding a linear transport problem for each time step. The governing equation in this problem has the form of a neutron transport equation with fission but no scattering. Numerical methods are described, whose origins lie in neutron transport, and that have been successfully adapted to this new problem. Acceleration methods that have been developed specifically for the radiative transfer problem, but may have generalizations applicable in neutronics problems, are also discussed

Methodical approaches to development of classification state methods of regulation business activity in fishery

OpenAIRE

She Son Gun

2014-01-01

Approaches to development of classification of the state methods of regulation of economy are considered. On the basis of the provided review the complex method of state regulation of business activity is reasonable. The offered principles allow improving public administration and can be used in industry concepts and state programs on support of small business in fishery.