WorldWideScience

Sample records for methods lfm workshop

  1. Method for Estimating the Parameters of LFM Radar Signal

    Tan Chuan-Zhang

    2017-01-01

    Full Text Available In order to obtain reliable estimate of parameters, it is very important to protect the integrality of linear frequency modulation (LFM signal. Therefore, in the practical LFM radar signal processing, the length of data frame is often greater than the pulse width (PW of signal. In this condition, estimating the parameters by fractional Fourier transform (FrFT will cause the signal to noise ratio (SNR decrease. Aiming at this problem, we multiply the data frame by a Gaussian window to improve the SNR. Besides, for a further improvement of parameters estimation precision, a novel algorithm is derived via Lagrange interpolation polynomial, and we enhance the algorithm by a logarithmic transformation. Simulation results demonstrate that the derived algorithm significantly reduces the estimation errors of chirp-rate and initial frequency.

  2. The GRIP method for collaborative roadmapping workshops

    Piirainen, Kalle

    2015-01-01

    Technology roadmapping is a well-known tool for technology management, but practical advice for facilitating collaborative roadmapping workshops is relatively scarce. To cater for this need, we have designed a method for collaborative roadmapping, dubbed the GRIP method, for facilitating group work...... in TRM workshops. The design is based on establish best practices in facilitation and our experiences with the method suggest it is a feasible tool for technology managers. The benefits of the method are that it enables engaging a diverse group of individuals to the roadmapping process effectively even...... during a short workshop session and facilitates shared understanding on the technology management issues....

  3. Geometric Methods in Physics : XXXIII Workshop

    Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

    2015-01-01

    This book presents a selection of papers based on the XXXIII Białowieża Workshop on Geometric Methods in Physics, 2014. The Białowieża Workshops are among the most important meetings in the field and attract researchers from both mathematics and physics. The articles gathered here are mathematically rigorous and have important physical implications, addressing the application of geometry in classical and quantum physics. Despite their long tradition, the workshops remain at the cutting edge of ongoing research. For the last several years, each Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented; some of the lectures are reproduced here. The unique atmosphere of the workshop and school is enhanced by its venue, framed by the natural beauty of the Białowieża forest in eastern Poland. The volume will be of interest to researchers and graduate students in mathematical physics, theoretical physics and m...

  4. Geometric Methods in Physics : XXXII Workshop

    Bieliavsky, Pierre; Odesskii, Alexander; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore; Geometric Methods in Physics

    2014-01-01

    The Białowieża Workshops on Geometric Methods in Physics, which are hosted in the unique setting of the Białowieża natural forest in Poland, are among the most important meetings in the field. Every year some 80 to 100 participants from both the mathematics and physics world join to discuss new developments and to exchange ideas. The current volume was produced on the occasion of the 32nd meeting in 2013. It is now becoming a tradition that the Workshop is followed by a School on Geometry and Physics, which consists of advanced lectures for graduate students and young researchers. Selected speakers at the 2013 Workshop were asked to contribute to this book, and their work was supplemented by additional review articles. The selection shows that, despite its now long tradition, the workshop remains at the cutting edge of research. The 2013 Workshop also celebrated the 75th birthday of Daniel Sternheimer, and on this occasion the discussion mainly focused on his contributions to mathematical physics such as ...

  5. DOA Estimation of Multiple LFM Sources Using a STFT-based and FBSS-based MUSIC Algorithm

    K. B. Cui

    2017-12-01

    Full Text Available Direction of arrival (DOA estimation is an important problem in array signal processing. An effective multiple signal classification (MUSIC method based on the short-time Fourier transform (STFT and forward/ backward spatial smoothing (FBSS techniques for the DOA estimation problem of multiple time-frequency (t-f joint LFM sources is addressed. Previous work in the area e. g. STFT-MUSIC algorithm cannot resolve the t-f completely or largely joint sources because they can only select the single-source t-f points. The proposed method con¬structs the spatial t-f distributions (STFDs by selecting the multiple-source t-f points and uses the FBSS techniques to solve the problem of rank loss. In this way, the STFT-FBSS-MUSIC algorithm can resolve the t-f largely joint or completely joint LFM sources. In addition, the proposed algorithm also owns pretty low computational complexity when resolving multiple LFM sources because it can reduce the times of the feature decomposition and spectrum search. The performance of the proposed method is compared with that of the existing t-f based MUSIC algorithms through computer simulations and the results show its good performance.

  6. Workshop on Analytical Methods in Statistics

    Jurečková, Jana; Maciak, Matúš; Pešta, Michal

    2017-01-01

    This volume collects authoritative contributions on analytical methods and mathematical statistics. The methods presented include resampling techniques; the minimization of divergence; estimation theory and regression, eventually under shape or other constraints or long memory; and iterative approximations when the optimal solution is difficult to achieve. It also investigates probability distributions with respect to their stability, heavy-tailness, Fisher information and other aspects, both asymptotically and non-asymptotically. The book not only presents the latest mathematical and statistical methods and their extensions, but also offers solutions to real-world problems including option pricing. The selected, peer-reviewed contributions were originally presented at the workshop on Analytical Methods in Statistics, AMISTAT 2015, held in Prague, Czech Republic, November 10-13, 2015.

  7. Microgenetic Learning Analytics Methods: Workshop Report

    Aghababyan, Ani; Martin, Taylor; Janisiewicz, Philip; Close, Kevin

    2016-01-01

    Learning analytics is an emerging discipline and, as such, benefits from new tools and methodological approaches. This work reviews and summarizes our workshop on microgenetic data analysis techniques using R, held at the second annual Learning Analytics Summer Institute in Cambridge, Massachusetts, on 30 June 2014. Specifically, this paper…

  8. Analysis of LFM-waveform Libraries for Cognitive Tracking Maneuvering Targets

    Wang Hongyan

    2016-01-01

    Full Text Available Based on the idea of the waveform agility in cognitive radars,the waveform libraries for maneuvering target tracking are discussed. LFM-waveform libraries are designed according to different combinations of chirp parameters and FrFT rotation angles. By applying the interact multiple model (IMM algorithm in tracking maneuvering targets, transmitted waveform is called real time from the LFM-waveform libraries. The waveforms are selected from the library according to the criterion of maximum mutual information between the current state of knowledge of the model and the measurement. Simulation results show that waveform library containing certain amount LFM-waveforms can improve the performance of cognitive tracking radar.

  9. XXXIV Bialowieza Workshop on Geometric Methods in Physics

    Ali, S; Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

    2016-01-01

    This book features a selection of articles based on the XXXIV Białowieża Workshop on Geometric Methods in Physics, 2015. The articles presented are mathematically rigorous, include important physical implications and address the application of geometry in classical and quantum physics. Special attention deserves the session devoted to discussions of Gerard Emch's most important and lasting achievements in mathematical physics. The Białowieża workshops are among the most important meetings in the field and gather participants from mathematics and physics alike. Despite their long tradition, the Workshops remain at the cutting edge of ongoing research. For the past several years, the Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented. The unique atmosphere of the Workshop and School is enhanced by the venue, framed by the natural beauty of the Białowieża forest in eastern Poland.

  10. 77 FR 43827 - International Workshop on Alternative Methods for Leptospira

    2012-07-26

    ... recent advances and innovations in science and technology that can be applied to Leptospira vaccine... alternative methods. The workshop is open to the public at no charge with attendance limited only by the... priority. Leptospirosis affects numerous animal species including livestock, pets, and wildlife. Vaccines...

  11. Quasi-Coherent Noise Jamming to LFM Radar Based on Pseudo-random Sequence Phase-modulation

    N. Tai

    2015-12-01

    Full Text Available A novel quasi-coherent noise jamming method is proposed against linear frequency modulation (LFM signal and pulse compression radar. Based on the structure of digital radio frequency memory (DRFM, the jamming signal is acquired by the pseudo-random sequence phase-modulation of sampled radar signal. The characteristic of jamming signal in time domain and frequency domain is analyzed in detail. Results of ambiguity function indicate that the blanket jamming effect along the range direction will be formed when jamming signal passes through the matched filter. By flexible controlling the parameters of interrupted-sampling pulse and pseudo-random sequence, different covering distances and jamming effects will be achieved. When the jamming power is equivalent, this jamming obtains higher process gain compared with non-coherent jamming. The jamming signal enhances the detection threshold and the real target avoids being detected. Simulation results and circuit engineering implementation validate that the jamming signal covers real target effectively.

  12. Creative Approaches to Teaching Graduate Research Methods Workshops

    Peter Reilly

    2017-01-01

    Engagement and deeper learning were enhanced by developing several innovative teaching strategies delivered in Research Methods workshops to Graduate Business Students.  Focusing primarily on students adopting a creative approach to formulating a valid research question for undertaking a dissertation successfully. These techniques are applicable to most subject domains to ensure student engagement.  Addressing the various multiple intelligences and learning styles existing within groups while...

  13. 3rd Workshop on "Combinations of Intelligent Methods and Applications"

    Palade, Vasile

    2013-01-01

    The combination of different intelligent methods is a very active research area in Artificial Intelligence (AI). The aim is to create integrated or hybrid methods that benefit from each of their components.  The 3rd Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2012) was intended to become a forum for exchanging experience and ideas among researchers and practitioners who are dealing with combining intelligent methods either based on first principles or in the context of specific applications. CIMA 2012 was held in conjunction with the 22nd European Conference on Artificial Intelligence (ECAI 2012).This volume includes revised versions of the papers presented at CIMA 2012.  .

  14. Technology transfer - insider protection workshop (Safeguards Evaluation Method - Insider Threat)

    Strait, R.S.; Renis, T.A.

    1986-01-01

    The Safeguards Evaluation Method - Insider Threat, developed by Lawrence Livermore National Laboratory, is a field-applicable tool to evaluate facility safeguards against theft or diversion of special nuclear material (SNM) by nonviolent insiders. To ensure successful transfer of this technology from the laboratory to DOE field offices and contractors, LLNL developed a three-part package. The package includes a workbook, user-friendly microcomputer software, and a three-day training program. The workbook guides an evaluation team through the Safeguards Evaluation Method and provides forms for gathering data. The microcomputer software assists in the evaluation of safeguards effectiveness. The software is designed for safeguards analysts with no previous computer experience. It runs on an IBM Personal Computer or any compatible machine. The three-day training program is called the Insider Protection Workshop. The workshop students learn how to use the workbook and the computer software to assess insider vulnerabilities and to evaluate the benefits and costs of potential improvements. These activities increase the students' appreciation of the insider threat. The workshop format is informal and interactive, employing four different instruction modes: classroom presentations, small-group sessions, a practical exercise, and ''hands-on'' analysis using microcomputers. This approach to technology transfer has been successful: over 100 safeguards planners and analysts have been trained in the method, and it is being used at facilities through the DOE complex

  15. 2-D DOA Estimation of LFM Signals Based on Dechirping Algorithm and Uniform Circle Array

    K. B. Cui

    2017-04-01

    Full Text Available Based on Dechirping algorithm and uniform circle array(UCA, a new 2-D direction of arrival (DOA estimation algorithm of linear frequency modulation (LFM signals is proposed in this paper. The algorithm uses the thought of Dechirping and regards the signal to be estimated which is received by the reference sensor as the reference signal and proceeds the difference frequency treatment with the signal received by each sensor. So the signal to be estimated becomes a single-frequency signal in each sensor. Then we transform the single-frequency signal to an isolated impulse through Fourier transform (FFT and construct a new array data model based on the prominent parts of the impulse. Finally, we respectively use multiple signal classification (MUSIC algorithm and rotational invariance technique (ESPRIT algorithm to realize 2-D DOA estimation of LFM signals. The simulation results verify the effectiveness of the algorithm proposed.

  16. Assessment of change in knowledge about research methods among delegates attending research methodology workshop

    Manisha Shrivastava

    2018-01-01

    Conclusion: There was increase in knowledge of the delegates after attending research methodology workshops. Participatory research methodology workshops are good methods of imparting knowledge, also the long term effects needs to be evaluated.

  17. Signal recognition and parameter estimation of BPSK-LFM combined modulation

    Long, Chao; Zhang, Lin; Liu, Yu

    2015-07-01

    Intra-pulse analysis plays an important role in electronic warfare. Intra-pulse feature abstraction focuses on primary parameters such as instantaneous frequency, modulation, and symbol rate. In this paper, automatic modulation recognition and feature extraction for combined BPSK-LFM modulation signals based on decision theoretic approach is studied. The simulation results show good recognition effect and high estimation precision, and the system is easy to be realized.

  18. OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

    2013-01-01

    Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

  19. 4th Workshop on Combinations of Intelligent Methods and Applications

    Palade, Vasile; Prentzas, Jim

    2016-01-01

    This volume includes extended and revised versions of the papers presented at the 4th Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2014) which was intended to become a forum for exchanging experience and ideas among researchers and practitioners dealing with combinations of different intelligent methods in Artificial Intelligence. The aim is to create integrated or hybrid methods that benefit from each of their components. Some of the existing presented efforts combine soft computing methods (fuzzy logic, neural networks and genetic algorithms). Another stream of efforts integrates case-based reasoning or machine learning with soft-computing methods. Some of the combinations have been more widely explored, like neuro-symbolic methods, neuro-fuzzy methods and methods combining rule-based and case-based reasoning. CIMA 2014 was held in conjunction with the 26th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2014). .

  20. Workshop on methods for siting groundwater monitoring wells: Proceedings

    Jacobson, E.

    1992-02-01

    The primary purpose of this workshop was to identify methods for the optimum siting of groundwater monitoring wells to minimize the number required that will provide statistically and physically representative samples. In addition, the workshop served to identify information and data gaps, stimulated discussion and provided an opportunity for exchange of ideas between regulators and scientists interested in siting groundwater monitoring wells. These proceedings should serve these objectives and provide a source of relevant information which may be used to evaluate the current state of development of methods for siting groundwater monitoring wells and the additional research needs. The proceedings contain the agenda and list of attendees in the first section. The abstract and viewgraphs for each presentation are given in the second section. For several presentations, abstracts and viewgraphs were not received. After the presentations, four working groups were organized and met for approximately a day. The working group leaders then gave a verbal summary of their sessions. This material was transcribed and is included in the next section of these proceedings. The appendices contain forms describing various methods discussed in the working groups

  1. A novel joint timing/frequency synchronization scheme based on Radon-Wigner transform of LFM signals in CO-OFDM systems

    Liu, Jianfei; Wei, Ying; Zeng, Xiangye; Lu, Jia; Zhang, Shuangxi; Wang, Mengjun

    2018-03-01

    A joint timing and frequency synchronization method has been proposed for coherent optical orthogonal frequency-division multiplexing (CO-OFDM) system in this paper. The timing offset (TO), integer frequency offset (FO) and the fractional FO can be realized by only one training symbol, which consists of two linear frequency modulation (LFM) signals with opposite chirp rates. By detecting the peak of LFM signals after Radon-Wigner transform (RWT), the TO and the integer FO can be estimated at the same time, moreover, the fractional FO can be acquired correspondingly through the self-correlation characteristic of the same training symbol. Simulation results show that the proposed method can give a more accurate TO estimation than the existing methods, especially at poor OSNR conditions; for the FO estimation, both the fractional and the integer FO can be estimated through the proposed training symbol with no extra overhead, a more accurate estimation and a large FO estimation range of [ - 5 GHz, 5GHz] can be acquired.

  2. Investigating country-specific music preferences and music recommendation algorithms with the LFM-1b dataset.

    Schedl, Markus

    2017-01-01

    Recently, the LFM-1b dataset has been proposed to foster research and evaluation in music retrieval and music recommender systems, Schedl (Proceedings of the ACM International Conference on Multimedia Retrieval (ICMR). New York, 2016). It contains more than one billion music listening events created by more than 120,000 users of Last.fm. Each listening event is characterized by artist, album, and track name, and further includes a timestamp. Basic demographic information and a selection of more elaborate listener-specific descriptors are included as well, for anonymized users. In this article, we reveal information about LFM-1b's acquisition and content and we compare it to existing datasets. We furthermore provide an extensive statistical analysis of the dataset, including basic properties of the item sets, demographic coverage, distribution of listening events (e.g., over artists and users), and aspects related to music preference and consumption behavior (e.g., temporal features and mainstreaminess of listeners). Exploiting country information of users and genre tags of artists, we also create taste profiles for populations and determine similar and dissimilar countries in terms of their populations' music preferences. Finally, we illustrate the dataset's usage in a simple artist recommendation task, whose results are intended to serve as baseline against which more elaborate techniques can be assessed.

  3. Creative Approaches to Teaching Graduate Research Methods Workshops

    Peter Reilly

    2017-06-01

    Full Text Available Engagement and deeper learning were enhanced by developing several innovative teaching strategies delivered in Research Methods workshops to Graduate Business Students.  Focusing primarily on students adopting a creative approach to formulating a valid research question for undertaking a dissertation successfully. These techniques are applicable to most subject domains to ensure student engagement.  Addressing the various multiple intelligences and learning styles existing within groups while ensuring these sessions are student centred and conducive to a collaborative learning environment.  Blogs, interactive tutorials, online videos, games and posters, are used to develop student’s cognitive and metacognitive abilities.  Using novelty images appeals to a groups’ intellectual curiosity, acting as an interpretive device to explain  the value of adopting a holistic rather than analytic approach towards a topic.

  4. Applying the chronicle workshop as a method for evaluating participatory interventions

    Poulsen, Signe; Ipsen, Christine; Gish, Liv

    2015-01-01

    Despite the growing interest for process evaluation in participatory interventions, studies examining specific methods for process evaluation are lacking. In this paper, we propose a new method for process evaluation – the chronicle workshop. The chronicle workshop has not previously been used...... productivity and well-being. In all cases, we saw that the chronicle workshop gave valuable information about the intervention process and that it initiated a joint reflection among participants from different departments. The chronicle workshop makes it possible to better understand the results...

  5. The Halden Reactor Project workshop meeting on human centred automation and function allocation methods

    Sebok, Angelia; Green, Marit; Larsen, Marit; Miberg, Ann Britt; Morisseau, Dolores

    1998-02-01

    A workshop on Human Centred Automation (HCA) and Function Allocation Methods was organised in Halden, September 29-30, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the Halden Project research agenda. The workshop meeting began with several presentations summarising current issues in HCA, Function Allocation Methods and Functional Modelling. Invited speakers presented their research or modelling efforts. Following the presentations, the workshop was divided into three working groups, all tasked with answering the same four questions: (1) What are the most important issues in Human Centred Automation? (2) Which strengths could be achieved by integrating Functional Modelling Methods into experimental Human Centred Automation research? (3) How should analytical and experimental methods be balanced? (4) What are the most important aspects in automation design methodology? Each group discussed the questions and produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. (author)

  6. FPGA based hardware optimized implementation of signal processing system for LFM pulsed radar

    Azim, Noor ul; Jun, Wang

    2016-11-01

    Signal processing is one of the main parts of any radar system. Different signal processing algorithms are used to extract information about different parameters like range, speed, direction etc, of a target in the field of radar communication. This paper presents LFM (Linear Frequency Modulation) pulsed radar signal processing algorithms which are used to improve target detection, range resolution and to estimate the speed of a target. Firstly, these algorithms are simulated in MATLAB to verify the concept and theory. After the conceptual verification in MATLAB, the simulation is converted into implementation on hardware using Xilinx FPGA. Chosen FPGA is Xilinx Virtex-6 (XC6LVX75T). For hardware implementation pipeline optimization is adopted and also other factors are considered for resources optimization in the process of implementation. Focusing algorithms in this work for improving target detection, range resolution and speed estimation are hardware optimized fast convolution processing based pulse compression and pulse Doppler processing.

  7. Future Technology Workshop: A Collaborative Method for the Design of New Learning Technologies and Activities

    Vavoula, Giasemi N.; Sharples, Mike

    2007-01-01

    We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…

  8. Conference Report: Readings of Qualitative Research – Methods Workshop

    Lisa Pfahl

    2004-05-01

    Full Text Available At the workshop, the relationship of poststructuralist and postmodernist social theory to the theoretical and methodological positions of interpretive sociology were discussed. A number of presentations contributed methodological reflections from biographical research and (Foucauldian discourse analysis; others discussed results of the application of discourse analysis and deconstruction in empirical research. All in all, it seems that (German biographical researchers have partly recognized and incorporated deconstructionist critique into their enquiries. The workshop has shown there is still a need for reflection on how poststructuralist strategies can inform empirical projects on a practical level. URN: urn:nbn:de:0114-fqs0402158

  9. Assessment of change in knowledge about research methods among delegates attending research methodology workshop.

    Shrivastava, Manisha; Shah, Nehal; Navaid, Seema

    2018-01-01

    In an era of evidence based medicine research is an essential part of medical profession whether clinical or academic. A research methodology workshop intends to help participants, those who are newer to research field or those who are already doing empirical research. The present study was conducted to assess the changes in knowledge of the participants of a research methodology workshop through a structured questionnaire. With administrative and ethical approval, a four day research methodology workshop was planned. The participants were subjected to a structured questionnaire (pre-test) containing 20 multiple choice questions (Q1-Q 20) related to the topics to be covered in research methodology workshop before the commencement of the workshop and then subjected to similar posttest questionnaire after the completion of workshop. The mean values of pre and post-test scores were calculated and the results were analyzed and compared. Out of the total 153 delegates, 45(29 %) were males and 108 were (71 %) females. 92 (60%) participants consented to fill the pre-test questionnaire and 68 (44%) filled the post-test questionnaire. The mean Pre-test and post-test scores at 95% Confidence Interval were 07.62 (SD ±3.220) and 09.66 (SD ±2.477) respectively. The differences were found to be significant using Paired Sample T test ( P research methodology workshops. Participatory research methodology workshops are good methods of imparting knowledge, also the long term effects needs to be evaluated.

  10. A comparison between workshop and DVD methods of training for physiotherapists in diagnostic ultrasound

    McKiernan, Sharmaine; Chiarelli, Pauline; Warren-Forward, Helen

    2012-01-01

    Diagnostic ultrasound has expanded into physiotherapy though training in the modality appears to be and is reported by physiotherapists as limited. To address this, a training package was specifically developed for physiotherapists within Australia. The aim of this study was to evaluate the training package for improved educational outcome and to ascertain if there was a difference in outcome between two forms of delivery. The training package was delivered either during a workshop, where the training package was delivered face to face, or via a self paced DVD, which was mailed to participants. Both participant groups completed a web based assessment prior to and at the completion of the training. The assessment assessed their knowledge in ultrasound physics, scanning technique and anatomy. Pre and post training assessment scores were available for 84 participants who attended a workshop and 96 participants who received the DVD. Important and statistically significant (p < 0.05) increases in assessment scores from the beginning to the end of the training program were seen in both groups. On average, workshop participant scores improved by 37% and DVD participant scores improved by 27%. No statistical difference in the post assessment scores of the workshop trained or DVD trained participants was evident. On comparison, no statistically significant difference between the two methods of training; workshop and DVD, was found so both can be seen to be beneficial to the professional development of the physiotherapist in the use of diagnostic ultrasound within their profession.

  11. Preliminary Proceedings First International Workshop on Formal Methods for WirelessSystems

    The FMWS workshops aim at bringing together researchers interested in formal methods for wireless systems, more specifically in theories for semantics, logics, and verification techniques for wireless systems. Wireless systems are rapidly increasing their success in real-world applications while...

  12. The use of the Chronicle Workshop as a method for evaluating participatory interventions

    Poulsen, Signe; Ipsen, Christine; Gish, Liv

    2014-01-01

    In the organizational intervention literature it has been stated that interventions needs to be evaluated both with respect to outcome and process. In an organizational intervention program we used the Chronicle Workshop in order to see if it was applicable as a process evaluation method. Surveys...

  13. A Workshop on Methods for Neutron Scattering Instrument Design. Introduction and Summary

    Hjelm, Rex P.

    1996-09-01

    The future of neutron and x-ray scattering instrument development and international cooperation was the focus of the workshop on ''Methods for Neutron Scattering Instrument Design'' September 23-25 at the E.O. Lawrence Berkeley National Laboratory. These proceedings are a collection of a portion of the invited and contributed presentations

  14. 76 FR 50221 - International Workshop on Alternative Methods for Human and Veterinary Rabies Vaccine Testing...

    2011-08-12

    ... and Veterinary Rabies Vaccine Testing: State of the Science and Planning the Way Forward AGENCY... (NICEATM) announces an ``International Workshop on Alternative Methods for Human and Veterinary Rabies... rabies vaccine potency testing, and to develop an implementation strategy to achieve global acceptance...

  15. Co-Designing and Co-Teaching Graduate Qualitative Methods: An Innovative Ethnographic Workshop Model

    Cordner, Alissa; Klein, Peter T.; Baiocchi, Gianpaolo

    2012-01-01

    This article describes an innovative collaboration between graduate students and a faculty member to co-design and co-teach a graduate-level workshop-style qualitative methods course. The goal of co-designing and co-teaching the course was to involve advanced graduate students in all aspects of designing a syllabus and leading class discussions in…

  16. FOREWORD: 5th International Workshop on New Computational Methods for Inverse Problems

    Vourc'h, Eric; Rodet, Thomas

    2015-11-01

    This volume of Journal of Physics: Conference Series is dedicated to the scientific research presented during the 5th International Workshop on New Computational Methods for Inverse Problems, NCMIP 2015 (http://complement.farman.ens-cachan.fr/NCMIP_2015.html). This workshop took place at Ecole Normale Supérieure de Cachan, on May 29, 2015. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of ValueTools Conference, in May 2011, and secondly at the initiative of Institut Farman, in May 2012, May 2013 and May 2014. The New Computational Methods for Inverse Problems (NCMIP) workshop focused on recent advances in the resolution of inverse problems. Indeed, inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, Kernel methods, learning methods

  17. FOREWORD: 4th International Workshop on New Computational Methods for Inverse Problems (NCMIP2014)

    2014-10-01

    This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 4th International Workshop on New Computational Methods for Inverse Problems, NCMIP 2014 (http://www.farman.ens-cachan.fr/NCMIP_2014.html). This workshop took place at Ecole Normale Supérieure de Cachan, on May 23, 2014. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 and May 2013, (http://www.farman.ens-cachan.fr/NCMIP_2012.html), (http://www.farman.ens-cachan.fr/NCMIP_2013.html). The New Computational Methods for Inverse Problems (NCMIP) Workshop focused on recent advances in the resolution of inverse problems. Indeed, inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the

  18. Proceeding of 1998-workshop on MHD computations. Study on numerical methods related to plasma confinement

    Kako, T.; Watanabe, T.

    1999-04-01

    This is the proceeding of 'Study on Numerical Methods Related to Plasma Confinement' held in National Institute for Fusion Science. In this workshop, theoretical and numerical analyses of possible plasma equilibria with their stability properties are presented. These are also various talks on mathematical as well as numerical analyses related to the computational methods for fluid dynamics and plasma physics. The 14 papers are indexed individually. (J.P.N.)

  19. Proceeding of 1998-workshop on MHD computations. Study on numerical methods related to plasma confinement

    Kako, T.; Watanabe, T. [eds.

    1999-04-01

    This is the proceeding of 'Study on Numerical Methods Related to Plasma Confinement' held in National Institute for Fusion Science. In this workshop, theoretical and numerical analyses of possible plasma equilibria with their stability properties are presented. These are also various talks on mathematical as well as numerical analyses related to the computational methods for fluid dynamics and plasma physics. The 14 papers are indexed individually. (J.P.N.)

  20. Workshop on Numerical Methods for Ordinary Differential Equations

    Gear, Charles; Russo, Elvira

    1989-01-01

    Developments in numerical initial value ode methods were the focal topic of the meeting at L'Aquila which explord the connections between the classical background and new research areas such as differental-algebraic equations, delay integral and integro-differential equations, stability properties, continuous extensions (interpolants for Runge-Kutta methods and their applications, effective stepsize control, parallel algorithms for small- and large-scale parallel architectures). The resulting proceedings address many of these topics in both research and survey papers.

  1. Formal Methods for Industrial Critical Systems : 17th International Workshop, FMICS 2012, Paris, France, August 27-28, 2012. Proceedings

    Stoelinga, Mariëlle; Pinger, Ralf

    This volume contains the papers presented at FMICS 2012, the 17th International Workshop on Formal Methods for Industrial Critical Systems, taking place August 27–28, 2012, in Paris, France. The aim of the FMICS workshop series is to provide a forum for researchers who are interested in the

  2. Research on the Optimization Method of Arm Movement in the Assembly Workshop Based on Ergonomics

    Hu, X. M.; Qu, H. W.; Xu, H. J.; Yang, L.; Yu, C. C.

    2017-12-01

    In order to improve the work efficiency and comfortability, Ergonomics is used to research the work of the operator in the assembly workshop. An optimization algorithm of arm movement in the assembly workshop is proposed. In the algorithm, a mathematical model of arm movement is established based on multi rigid body movement model and D-H method. The solution of inverse kinematics equation on arm movement is solved through kinematics theory. The evaluation functions of each joint movement and the whole arm movement are given based on the comfortability of human body joint. The solution method of the optimal arm movement posture based on the evaluation functions is described. The software CATIA is used to verify that the optimal arm movement posture is valid in an example and the experimental result show the effectiveness of the algorithm.

  3. Workshop on Recent Trends in Complex Methods for Partial Differential Equations

    Celebi, A; Tutschke, Wolfgang

    1999-01-01

    This volume is a collection of manscripts mainly originating from talks and lectures given at the Workshop on Recent Trends in Complex Methods for Par­ tial Differential Equations held from July 6 to 10, 1998 at the Middle East Technical University in Ankara, Turkey, sponsored by The Scientific and Tech­ nical Research Council of Turkey and the Middle East Technical University. This workshop is a continuation oftwo workshops from 1988 and 1993 at the In­ ternational Centre for Theoretical Physics in Trieste, Italy entitled Functional analytic Methods in Complex Analysis and Applications to Partial Differential Equations. Since classical complex analysis of one and several variables has a long tra­ dition it is of high level. But most of its basic problems are solved nowadays so that within the last few decades it has lost more and more attention. The area of complex and functional analytic methods in partial differential equations, however, is still a growing and flourishing field, in particular as these ...

  4. Outcome of the First wwPDB Hybrid/Integrative Methods Task Force Workshop

    Sali, Andrej; Berman, Helen M.; Schwede, Torsten; Trewhella, Jill; Kleywegt, Gerard; Burley, Stephen K.; Markley, John; Nakamura, Haruki; Adams, Paul; Bonvin, Alexandre M.J.J.; Chiu, Wah; Dal Peraro, Matteo; Di Maio, Frank; Ferrin, Thomas E.; Grünewald, Kay; Gutmanas, Aleksandras; Henderson, Richard; Hummer, Gerhard; Iwasaki, Kenji; Johnson, Graham; Lawson, Catherine L.; Meiler, Jens; Marti-Renom, Marc A.; Montelione, Gaetano T.; Nilges, Michael; Nussinov, Ruth; Patwardhan, Ardan; Rappsilber, Juri; Read, Randy J.; Saibil, Helen; Schröder, Gunnar F.; Schwieters, Charles D.; Seidel, Claus A. M.; Svergun, Dmitri; Topf, Maya; Ulrich, Eldon L.; Velankar, Sameer; Westbrook, John D.

    2016-01-01

    Summary Structures of biomolecular systems are increasingly computed by integrative modeling that relies on varied types of experimental data and theoretical information. We describe here the proceedings and conclusions from the first wwPDB Hybrid/Integrative Methods Task Force Workshop held at the European Bioinformatics Institute in Hinxton, UK, October 6 and 7, 2014. At the workshop, experts in various experimental fields of structural biology, experts in integrative modeling and visualization, and experts in data archiving addressed a series of questions central to the future of structural biology. How should integrative models be represented? How should the data and integrative models be validated? What data should be archived? How should the data and models be archived? What information should accompany the publication of integrative models? PMID:26095030

  5. NATO Advanced Research Workshop on Methods and Mechanisms for Producing Ions from Large Molecules

    Ens, Werner

    1991-01-01

    A NATO Advanced Research Workshop on Methods and Mechanisms for Producing Ions from Large Molecules was held at Minaki Lodge, Minaki, Ontario, Canada, from 24 to 28 June 1990. The workshop was hosted by the time-of-flight group of the Department of Physics at the University of Manitoba, and was attended by 64 invited participants from around the world. Twenty-nine invited talks were given and 19 papers were presented as posters. Of the 48 contributions, 38 are included in these proceedings. The conference was organized to study the rapidly changing field of mass spectrometry of biomolecules. Particle-induced desorption (especially with MeV particles) has been the most effective method of producing molecular ions from biomolecules. An important part of the workshop was devoted to recent developments in this field, particularly to progress in understanding the fundamentals of the desorption process. In this respect, the meeting was similar to previous conferences in Marburg, FRG (1978); Paris, F (1980); Uppsala...

  6. NATO Advanced Research Workshop, 19-22 May 1997: Rapid Method for Monitoring the Environment for Biological Hazards

    1997-01-01

    The NATO Advanced Research Workshop met for the purpose of bringing to light rapid methods for monitoring the environment for biological hazards such as biological warfare agents, naturally occurring...

  7. Proceedings of the Workshop on Methods & Tools for Computer Supported Collaborative Creativity Process: Linking creativity & informal learning

    Retalis, Symeon; Sloep, Peter

    2009-01-01

    Retalis, S., & Sloep, P. B. (Eds.) (2009). Collection of 4 symposium papers at EC-TEL 2009. Proceedings of the Workshop on Methods & Tools for Computer Supported Collaborative Creativity Process: Linking creativity & informal learning. September, 30, 2009, Nice,

  8. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

    Tortorelli, J.P. [ed.] [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance.

  9. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

    Tortorelli, J.P.

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC's intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance

  10. Facilitated workshop method to involve stakeholders and public in decision making process in radiological emergencies

    Mustonen, Raimo; Sinkko, Kari [STUK-Radiation and Nuclear Safety Authority, Helsinki (Finland). Research and Environmental Surveillance; Haemaelaeinen, Raimo P. [Helsinki Univ. of Technology, Helsinki (Finland). System Analysis Laboratory

    2006-09-15

    International organisations in radiation protection have for many years recommended that key players, e.g. authorities, expert organisations, industry, producers of foodstuffs and even the public, should be involved in the planning of protective actions in case of a nuclear accident. In this work, we have developed and tested a facilitated workshop method where representatives from various fields of the society aim to identify and evaluate systematically protective actions. Decision analysis techniques have been applied in workshops in order to find out the most feasible countermeasure strategies and to make the decision making-process transparent and auditable. The work builds on case studies where it was assumed that a hypothetical accident had led to a release of considerable amounts of radionuclides and therefore various types of countermeasures should be considered. This paper provides experiences gained in several European countries on how to facilitate this kind of workshops and how modern decision analysis techniques can be applied in the decision-making process.

  11. Facilitated workshop method to involve stakeholders and public in decision making process in radiological emergencies

    Mustonen, Raimo; Sinkko, Kari; Haemaelaeinen, Raimo P.

    2006-01-01

    International organisations in radiation protection have for many years recommended that key players, e.g. authorities, expert organisations, industry, producers of foodstuffs and even the public, should be involved in the planning of protective actions in case of a nuclear accident. In this work, we have developed and tested a facilitated workshop method where representatives from various fields of the society aim to identify and evaluate systematically protective actions. Decision analysis techniques have been applied in workshops in order to find out the most feasible countermeasure strategies and to make the decision making-process transparent and auditable. The work builds on case studies where it was assumed that a hypothetical accident had led to a release of considerable amounts of radionuclides and therefore various types of countermeasures should be considered. This paper provides experiences gained in several European countries on how to facilitate this kind of workshops and how modern decision analysis techniques can be applied in the decision-making process

  12. Proceeding of 1999-workshop on MHD computations 'study on numerical methods related to plasma confinement'

    Kako, T.; Watanabe, T.

    2000-06-01

    This is the proceeding of 'study on numerical methods related to plasma confinement' held in National Institute for Fusion Science. In this workshop, theoretical and numerical analyses of possible plasma equilibria with their stability properties are presented. There are also various lectures on mathematical as well as numerical analyses related to the computational methods for fluid dynamics and plasma physics. Separate abstracts were presented for 13 of the papers in this report. The remaining 6 were considered outside the subject scope of INIS. (J.P.N.)

  13. Report of a CSNI workshop on uncertainty analysis methods. Volume 1 + 2

    Wickett, A.J.; Yadigaroglu, G.

    1994-08-01

    The OECD NEA CSNI Principal Working Group 2 (PWG2) Task Group on Thermal Hydraulic System Behaviour (TGTHSB) has, in recent years, received presentations of a variety of different methods to analyze the uncertainty in the calculations of advanced unbiased (best estimate) codes. Proposals were also made for an International Standard Problem (ISP) to compare the uncertainty analysis methods. The objectives for the Workshop were to discuss and fully understand the principles of uncertainty analysis relevant to LOCA modelling and like problems, to examine the underlying issues from first principles, in preference to comparing and contrasting the currently proposed methods, to reach consensus on the issues identified as far as possible while not avoiding the controversial aspects, to identify as clearly as possible unreconciled differences, and to issue a Status Report. Eight uncertainty analysis methods were presented. A structured discussion of various aspects of uncertainty analysis followed - the need for uncertainty analysis, identification and ranking of uncertainties, characterisation, quantification and combination of uncertainties and applications, resources and future developments. As a result, the objectives set out above were, to a very large extent, achieved. Plans for the ISP were also discussed. Volume 1 contains a record of the discussions on uncertainty methods. Volume 2 is a compilation of descriptions of the eight uncertainty analysis methods presented at the workshop

  14. RESULTS FROM THE (1) DATA COLLECTION WORKSHOP, (2) MODELING WORKSHOP AND (3) DRILLING AND CORING METHODS WORKSHOP AS PART OF THE JOINT INDUSTRY PARTICIPATION (JIP) PROJECT TO CHARACTERIZE NATURAL GAS HYDRATES IN THE DEEPWATER GULF OF MEXICO

    Stephen A. Holditch; Emrys Jones

    2002-09-01

    In 2000, Chevron began a project to learn how to characterize the natural gas hydrate deposits in the deepwater portions of the Gulf of Mexico. A Joint Industry Participation (JIP) group was formed in 2001, and a project partially funded by the U.S. Department of Energy (DOE) began in October 2001. The primary objective of this project is to develop technology and data to assist in the characterization of naturally occurring gas hydrates in the deepwater Gulf of Mexico. These naturally occurring gas hydrates can cause problems relating to drilling and production of oil and gas, as well as building and operating pipelines. Other objectives of this project are to better understand how natural gas hydrates can affect seafloor stability, to gather data that can be used to study climate change, and to determine how the results of this project can be used to assess if and how gas hydrates act as a trapping mechanism for shallow oil or gas reservoirs. As part of the project, three workshops were held. The first was a data collection workshop, held in Houston during March 14-15, 2002. The purpose of this workshop was to find out what data exist on gas hydrates and to begin making that data available to the JIP. The second and third workshop, on Geoscience and Reservoir Modeling, and Drilling and Coring Methods, respectively, were held simultaneously in Houston during May 9-10, 2002. The Modeling Workshop was conducted to find out what data the various engineers, scientists and geoscientists want the JIP to collect in both the field and the laboratory. The Drilling and Coring workshop was to begin making plans on how we can collect the data required by the project's principal investigators.

  15. Urbanist workshops between theory and practice: The importance of spatial and programme reference levels in the planning method

    Gregor Čok

    2013-01-01

    One of the key characteristics of urban-architectural workshops as a soft planning method is above all the fact that the authors are free of burden of formal facts and reference levels of the local environment, which do not influence the concept and the working process. Within this framework, the workshop presents an opportunity for the creator to focus primarily on the core of the problem, and work creatively towards a substantiated professional solution. In addition to the basic ref...

  16. Geometrically Unfitted Finite Element Methods and Applications : Proceedings of the UCL Workshop 2016

    Burman, Erik; Larson, Mats; Olshanskii, Maxim

    2017-01-01

    This book provides a snapshot of the state of the art of the rapidly evolving field of integration of geometric data in finite element computations. The contributions to this volume, based on research presented at the UCL workshop on the topic in January 2016, include three review papers on core topics such as fictitious domain methods for elasticity, trace finite element methods for partial differential equations defined on surfaces, and Nitsche’s method for contact problems. Five chapters present original research articles on related theoretical topics, including Lagrange multiplier methods, interface problems, bulk-surface coupling, and approximation of partial differential equations on moving domains. Finally, two chapters discuss advanced applications such as crack propagation or flow in fractured poroelastic media. This is the first volume that provides a comprehensive overview of the field of unfitted finite element methods, including recent techniques such as cutFEM, traceFEM, ghost penalty, and aug...

  17. Proceedings of the Workshop on Current and Emerging methods for Optimising Safety and Efficiency in Nuclear Decommissioning

    2017-02-01

    The workshop was organised by the Institute for Energy Technology (IFE) on behalf of the OECD Halden Reactor Project (OECD-HRP) and in collaboration with the International Atomic Energy Agency (IAEA) and the Nuclear Energy Agency (NEA). The workshop brought together more than 100 people (operators, regulators, scientists, consultants, and contractors) from 25 countries. Program: Day 1 - Successful application of R and D in decommissioning and future needs (Welcome and Opening Speeches; Session 1: Workshop Introductory Presentations; Session 2: Experience from starting, on-going and completed decommissioning projects). Day 2 - R and D and application of advanced technologies for decommissioning (Session 3: New technologies for decommissioning; Session 4: Advanced information technologies for decommissioning). Day 3 - Improving decommissioning management on project, national and international level (Session 5: Challenges and methods for improving decommissioning; Session 6: Workshop closing)

  18. The Halden Reactor Project workshop on improved system development using case-tools based on formal methods

    Gran, Bjoern Axel; Sivertsen, Terje; Stoelen, Ketil; Thunem, Harald; Zhang, Wenhui

    1999-02-01

    The workshop 'Improved system development using case-tools based on formal methods' was organised in Halden, December 1-2, 1998. The purpose of the workshop was to present and discuss the state-of-the-art with respect to formal approaches. The workshop had two invited presentations: 'Formality in specification and modelling: developments in software engineering practice' by John Fitzgerald (Centre for Software Reliability, UK), and 'Formal methods in industry - reaching results when correctness is not the only issue' by Oeystein Haugen (Ericsson NorARC, Norway). The workshop also had several presentations divided into three sessions on industrial experience, tools, and combined approaches. Each day there was a discussion. The first was on the effect of formalization, while the second was on the role of formal verification. At the end of the workshop, the presentations and discussions were summarised into specific recommendations. This report summarises the presentations of the speakers, the discussions, the recommendations, and the demonstrations given at the workshop (author) (ml)

  19. 5th International Workshop on Combinations of Intelligent Methods and Applications

    Palade, Vasile; Prentzas, Jim

    2017-01-01

    Complex problems usually cannot be solved by individual methods or techniques and require the synergism of more than one of them to be solved. This book presents a number of current efforts that use combinations of methods or techniques to solve complex problems in the areas of sentiment analysis, search in GIS, graph-based social networking, intelligent e-learning systems, data mining and recommendation systems. Most of them are connected with specific applications, whereas the rest are combinations based on principles. Most of the chapters are extended versions of the corresponding papers presented in CIMA-15 Workshop, which took place in conjunction with IEEE ICTAI-15, in November 2015. The rest are invited papers that responded to special call for papers for the book. The book is addressed to researchers and practitioners from academia or industry, who are interested in using combined methods in solving complex problems in the above areas.

  20. 6th International Workshop on New Computational Methods for Inverse Problems

    2016-01-01

    Foreword This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 6 th International Workshop on New Computational Methods for Inverse Problems, NCMIP 2016 (http://complement.farman.ens-cachan.fr/NCMIP 2016.html). This workshop took place at Ecole Normale Supérieure de Cachan, on May 20, 2016. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of ValueTools Conference, in May 2011, and secondly at the initiative of Institut Farman, in May 2012, May 2013, May 2014 and May 2015. The New Computational Methods for Inverse Problems (NCMIP) workshop focused on recent advances in the resolution of inverse problems. Indeed, inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists in estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one- day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, Kernel

  1. FOREWORD: 3rd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2013)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2013-10-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 3rd International Workshop on New Computational Methods for Inverse Problems, NCMIP 2013 (http://www.farman.ens-cachan.fr/NCMIP_2013.html). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 22 May 2013, at the initiative of Institut Farman. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 (http://www.farman.ens-cachan.fr/NCMIP_2012.html). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational

  2. Supporting Interactive Teaching Methods at the New Faculty Workshop with Astronomy Lecture-Tutorials

    Slater, T. F.; Brissenden, G.; Duestua, S.; Prather, E. E.

    2004-05-01

    Ongoing research by the Conceptual Astronomy and Physics Education Research (CAPER) Team at the University of Arizona Steward Observatory suggests that, although faculty realize that lecture-based instruction is ineffective for many students, they are not aware of what interactive teaching strategies are available, particularly for large enrollment courses. A major emphasis of the AAPT/AAS New Faculty Workshop was to introduce faculty to effective active-learning strategies based on an understanding of how people learn. Faculty were introduced to think-pair-share methods where students work together to explain difficult concepts to each other. Faculty were also introduced to authentic assessment strategies that go beyond using traditional multiple-choice tests. In particular, faculty were introduced to Lecture-Tutorials for Introductory Astronomy. The Lecture-Tutorials are instructional materials intended for use with collaborative student learning groups and are designed specifically to be easily integrated into existing courses centered on conventional lectures and do not require any outside equipment or a drastic course revision for implementation. The materials are based on research into student beliefs and reasoning difficulties and use effective instructional strategies that center on student learning. Each workshop presentation was complimented by a follow-up small group discussion session.

  3. An AHP-based evaluation method for teacher training workshop on information and communication technology.

    Lucas, Rochelle Irene; Promentilla, Michael Angelo; Ubando, Aristotle; Tan, Raymond Girard; Aviso, Kathleen; Yu, Krista Danielle

    2017-08-01

    The emergence of information and communication technology (ICT) has created opportunities for enhancing the learning process at different educational levels. However, its potential benefits can only be fully realized if teachers are properly trained to utilize such tools. The rapid evolution of ICT also necessitates rigorous assessment of training programs by participants. Thus, this study proposes an evaluation framework based on the Analytic Hierarchy Process (AHP) to systematically evaluate such workshops designed for teachers. The evaluation model is decomposed hierarchically into four main criteria namely: (1) workshop design, (2) quality of content of the workshop, (3) quality of delivery of the content of the workshop, and the (4) relevance of the workshop. These criteria are further disaggregated into 24 sub-indicators to measure the effectiveness of the workshop as perceived by the participants based on their own expectations. This framework is applied to a case study of ICT workshops done in the Philippines. In this case, relevance of the workshop is found to be the most important main criterion identified by the participants, particularly on the new ICT knowledge that promotes teachers' professional growth and development. The workshop evaluation index (WEI) is also proposed as a metric to support decision-making by providing a mechanism for benchmarking performance, tracking improvement over time, and developing strategies for the design and improvement of training programs or workshops on ICT for teachers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. 77 FR 2064 - Availability of the Report on the International Workshop on Alternative Methods To Reduce, Refine...

    2012-01-13

    ... Validation of Alternative Methods, and Health Canada. The workshop was co-sponsored by the Society of... Coordinating Committee on the Validation of Alternative Methods (ICCVAM), an interagency committee of the... prioritize research, development, and validation efforts needed to address these knowledge and data gaps in...

  5. Proceedings First Workshop on Quantitative Formal Methods : theory and applications (QFM'09, Eindhoven, The Netherlands, November 3, 2009)

    Andova, S.; McIver, A.; D'Argenio, P.R.; Cuijpers, P.J.L.; Markovski, J.; Morgan, C.; Núñez, M.

    2009-01-01

    This volume contains the papers presented at the 1st workshop on Quantitative Formal Methods: Theory and Applications, which was held in Eindhoven on 3 November 2009 as part of the International Symposium on Formal Methods 2009. This volume contains the final versions of all contributions accepted

  6. 7th International Workshop on Meshfree Methods for Partial Differential Equations

    Schweitzer, Marc

    2015-01-01

    Meshfree methods, particle methods, and generalized finite element methods have witnessed substantial development since the mid 1990s. The growing interest in these methods is due in part to the fact that they are extremely flexible numerical tools and can be interpreted in a number of ways. For instance, meshfree methods can be viewed as a natural extension of classical finite element and finite difference methods to scattered node configurations with no fixed connectivity. Furthermore, meshfree methods offer a number of advantageous features which are especially attractive when dealing with multiscale phenomena: a priori knowledge about particular local behavior of the solution can easily be introduced in the meshfree approximation space, and coarse-scale approximations can be seamlessly refined with fine-scale information. This volume collects selected papers presented at the Seventh International Workshop on Meshfree Methods, held in Bonn, Germany in September 2013. They address various aspec...

  7. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  8. Final report: ES11: The 23rd Annual Workshop on Electronic Structure Methods

    Rappe, Andrew M. [Univ. of Pennsylvania, Philadelphia, PA (United States). Dept. of Chemistry

    2011-08-31

    ES11: the 23rd Annual Workshop on Electronic Structure Methods was held from June 6-9, 2011 at the University of Pennsylvania. The local organizing committee (see Section II) led by PI Andrew M. Rappe supervised the organization of the conference, before, during, and after the meeting itself. The national organizing committee set the technical program of talks, and provided support and advice in various ways. The conference was well-attended (see Section III). An important feature of this conference was a series of panel discussions (see Section IV) to discuss the field of electronic structure and to set new directions. The technical program was of extraordinarily high quality (see Section V). The host institution, the University of Pennsylvania, provided a supportive environment for this meeting (see Section VI).

  9. CEC workshop on methods for assessing the offsite radiological consequences of nuclear accidents

    Luykx, F.; Sinnaeve, J.

    1986-01-01

    On Apr 15-19, 1985, in Luxembourg, the Commission of the European Communities (CEC), in collaboration with the Kernforschungszentrum Karlsruhe (KfK), Federal Republic of Germany, and the National Radiological Protection Board (NRPB), United Kingdom, presented a workshop on methods for assessing the offsite radiological consequences of nuclear accidents. The program consisted of eight sessions. The main conclusions, which were presented in the Round Table Session by the individual Session Chairmen, are summarized. Session topics are as follows: Session I: international developments in the field of accident consequence assessment (ACA); Session II: atmospheric dispersion; Session III: food chain models; Session IV: urban contamination; Session V: demographic and land use data; Session VI: dosimetry, health effects, economic and counter measure models; Session VII: uncertainty analysis; and Session VIII: application of probabilistic consequence models as decision aids

  10. Automatic Modulation Classification of LFM and Polyphase-coded Radar Signals

    S. B. S. Hanbali

    2017-12-01

    Full Text Available There are several techniques for detecting and classifying low probability of intercept radar signals such as Wigner distribution, Choi-Williams distribution and time-frequency rate distribution, but these distributions require high SNR. To overcome this problem, we propose a new technique for detecting and classifying linear frequency modulation signal and polyphase coded signals using optimum fractional Fourier transform at low SNR. The theoretical analysis and simulation experiments demonstrate the validity and efficiency of the proposed method.

  11. Using methodical design for culture change in Dutch building design practice : karning by doing' workshops

    Savanovic, P.; Zeiler, W.

    2007-01-01

    Since 2001 the ‘integral approach’ has been propagated within Dutch building design practice, through continuously developing ‘learning by doing’ workshops. The organization of workshops started during the ‘Integral Design’ project that was conducted by the Dutch Society for Building Services

  12. Proceedings of the National Silviculture Workshop: The Shelterwood Regeneration Method; Charleston, South Carolina September 17-21, 1979

    Dan Cramsey; Carl Puuri; Dick Miller; Billy E. Page; David Smith; David Marquis; Jack Usher; Bob Naumann; William Beaufait; Robert Loomis; Edward Smith; David Loftis; Gordon Langdon; Thomas Croker; William Boyer; Jim Edgren; Douglas Roy; John Hughes; Charles Boldt; Glenn Jacobson; Dick Godman; Carl Tubbs; Ivan Sander; Bob Blomquist

    1979-01-01

    Historic Charleston, South Carolina was the site of the 1979 Silviculture Workshop. The objective of the meeting was to discuss state of the art application of the shelterwood regeneration method to forests of the United States. These proceedings include the presentations of the individuals on the program.

  13. Setting up Information Literacy Workshops in School Libraries: Imperatives, Principles and Methods

    Reza Mokhtarpour

    2010-09-01

    Full Text Available While many professional literature have talked at length about the importance of dealing with information literacy in school libraries in ICT dominated era, but few have dealt with the nature and mode of implementation nor offered a road map. The strategy emphasized in this paper is to hold information literacy sessions through effective workshops. While explaining the reasons behind such workshops being essential in enhancing information literacy skills, the most important principles and stages for setting up of such workshops are offered in a step-by-step manner.

  14. Workshop report on large-scale matrix diagonalization methods in chemistry theory institute

    Bischof, C.H.; Shepard, R.L.; Huss-Lederman, S. [eds.

    1996-10-01

    The Large-Scale Matrix Diagonalization Methods in Chemistry theory institute brought together 41 computational chemists and numerical analysts. The goal was to understand the needs of the computational chemistry community in problems that utilize matrix diagonalization techniques. This was accomplished by reviewing the current state of the art and looking toward future directions in matrix diagonalization techniques. This institute occurred about 20 years after a related meeting of similar size. During those 20 years the Davidson method continued to dominate the problem of finding a few extremal eigenvalues for many computational chemistry problems. Work on non-diagonally dominant and non-Hermitian problems as well as parallel computing has also brought new methods to bear. The changes and similarities in problems and methods over the past two decades offered an interesting viewpoint for the success in this area. One important area covered by the talks was overviews of the source and nature of the chemistry problems. The numerical analysts were uniformly grateful for the efforts to convey a better understanding of the problems and issues faced in computational chemistry. An important outcome was an understanding of the wide range of eigenproblems encountered in computational chemistry. The workshop covered problems involving self- consistent-field (SCF), configuration interaction (CI), intramolecular vibrational relaxation (IVR), and scattering problems. In atomic structure calculations using the Hartree-Fock method (SCF), the symmetric matrices can range from order hundreds to thousands. These matrices often include large clusters of eigenvalues which can be as much as 25% of the spectrum. However, if Cl methods are also used, the matrix size can be between 10{sup 4} and 10{sup 9} where only one or a few extremal eigenvalues and eigenvectors are needed. Working with very large matrices has lead to the development of

  15. Reflecting on the Postgraduate Experience: Teaching Research Methods and Statistics: Review of the DART-P Sponsored Workshop at PsyPAG 2013

    Jackson, Emma J.; Davies, Emma. L.

    2014-01-01

    Following the success of last year's teaching and career development workshop, this year's DART-P sponsored workshop at the Psychology Postgraduate Affairs Group (PsyPAG) Annual Conference held at Lancaster University focused on postgraduate's experiences of teaching research methods. This article provides a review of the invited speakers…

  16. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 2: Supporting documents

    Tortorelli, J.P. [ed.] [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains presentation material and a transcript of the workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report.

  17. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 2: Supporting documents

    Tortorelli, J.P.

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains presentation material and a transcript of the workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC's intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report

  18. PREFACE: Joint IPPP Durham/Cockcroft Institute/ICFA Workshop on Advanced QED methods for Future Accelerators

    Bailey, I. R.; Barber, D. P.; Chattopadhyay, S.; Hartin, A.; Heinzl, T.; Hesselbach, S.; Moortgat-Pick, G. A.

    2009-11-01

    The joint IPPP Durham/Cockcroft Institute/ICFA workshop on advanced QED methods for future accelerators took place at the Cockcroft Institute in early March 2009. The motivation for the workshop was the need for a detailed consideration of the physics processes associated with beam-beam effects at the interaction points of future high-energy electron-positron colliders. There is a broad consensus within the particle physics community that the next international facility for experimental high-energy physics research beyond the Large Hadron Collider at CERN should be a high-luminosity electron-positron collider working at the TeV energy scale. One important feature of such a collider will be its ability to deliver polarised beams to the interaction point and to provide accurate measurements of the polarisation state during physics collisions. The physics collisions take place in very dense charge bunches in the presence of extremely strong electromagnetic fields of field strength of order of the Schwinger critical field strength of 4.4×1013 Gauss. These intense fields lead to depolarisation processes which need to be thoroughly understood in order to reduce uncertainty in the polarisation state at collision. To that end, this workshop reviewed the formalisms for describing radiative processes and the methods of calculation in the future strong-field environments. These calculations are based on the Furry picture of organising the interaction term of the Lagrangian. The means of deriving the transition probability of the most important of the beam-beam processes - Beamsstrahlung - was reviewed. The workshop was honoured by the presentations of one of the founders, V N Baier, of the 'Operator method' - one means for performing these calculations. Other theoretical methods of performing calculations in the Furry picture, namely those due to A I Nikishov, V I Ritus et al, were reviewed and intense field quantum processes in fields of different form - namely those

  19. PV Performance Modeling Methods and Practices: Results from the 4th PV Performance Modeling Collaborative Workshop.

    Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    In 2014, the IEA PVPS Task 13 added the PVPMC as a formal activity to its technical work plan for 2014-2017. The goal of this activity is to expand the reach of the PVPMC to a broader international audience and help to reduce PV performance modeling uncertainties worldwide. One of the main deliverables of this activity is to host one or more PVPMC workshops outside the US to foster more international participation within this collaborative group. This report reviews the results of the first in a series of these joint IEA PVPS Task 13/PVPMC workshops. The 4th PV Performance Modeling Collaborative Workshop was held in Cologne, Germany at the headquarters of TÜV Rheinland on October 22-23, 2015.

  20. Use of the Contingent Valuation Method in the assessment of a landfill mining project.

    Marella, Giuliano; Raga, Roberto

    2014-07-01

    A comprehensive approach for the evaluation of the economic feasibility of landfill mining (LFM) should take into account not only the direct costs and revenues for the private investor, but also the social benefits or costs (generally called externalities), in such a way that projects generating major social benefits (and no significant private revenues) are not overlooked. With a view to contributing to the development of a common framework for the evaluation of LFM projects, this paper presents the results of a case study where the issue of the assessment of social benefits from a LFM project is addressed. In particular, the Contingent Valuation Method is applied for the monetary assessment of the community-perceived benefits from the remediation of an old uncontrolled waste deposit by means of LFM and the conversion of the area into a park. Based on the results of a survey carried out on a random sample of people living near the old landfill, the economic values of the individual willingness to pay (WTP) for LFM and the subsequent creation of a public park were calculated and the correlations with the relevant variables (distance from the landfill site, age, income, sex, education level) assessed. The results were then suitably extended and the monetary value of the welfare increase of the whole population resident in the area and potentially affected both by LFM and the creation of the park was calculated. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. WORKSHOP REPORT - CONSIDERATIONS FOR DEVELOPING LEACHING TEST METHODS FOR SEMI- AND NON-VOLATILE ORGANIC COMPOUNDS

    The report provides a summary of the information exchange at a workshop on the potential for release of semi- or non-volatile organic constituents at contaminated sites where sub-surface treatment has been used to control migration, and from waste that is disposed or re-used. The...

  2. Proceedings of the workshop on review of dose modeling methods for demonstration of compliance with the radiological criteria for license termination

    Nicholson, T.J.; Parrott, J.D.

    1998-05-01

    The workshop was one in a series to support NRC staff development of guidance for implementing the final rule on ''Radiological Criteria for License Termination.'' The workshop topics included discussion of: dose models used for decommissioning reviews; identification of criteria for evaluating the acceptability of dose models; and selection of parameter values for demonstrating compliance with the final rule. The 2-day public workshop was jointly organized by RES and NMSS staff responsible for reviewing dose modeling methods used in decommissioning reviews. The workshop was noticed in the Federal Register (62 FR 51706). The workshop presenters included: NMSS and RES staff, who discussed both dose modeling needs for licensing reviews, and development of guidance related to dose modeling and parameter selection needs; DOE national laboratory scientists, who provided responses to earlier NRC staff-developed questions and discussed their various Federally-sponsored dose models (i.e., DandD, RESRAD, and MEPAS codes); and an EPA scientist, who presented details on the EPA dose assessment model (i.e., PRESTO code). The workshop was formatted to provide opportunities for the attendees to observe computer demonstrations of the dose codes presented. More than 120 workshop attendees from NRC Headquarters and the Regions, Agreement States; as well as industry representatives and consultants; scientists from EPA, DOD, DNFSB, DOE, and the national laboratories; and interested members of the public participated. A complete transcript of the workshop, including viewgraphs and attendance lists, is available in the NRC Public Document Room. This NUREG/CP documents the formal presentations made during the workshop, and provides a preface outlining the workshop's focus, objectives, background, topics and questions provided to the invited speakers, and those raised during the panel discussion. NUREG/CP-0163 also provides technical bases supporting the development of decommissioning

  3. Proceeding of 1999-workshop on MHD computations 'study on numerical methods related to plasma confinement'

    Kako, T.; Watanabe, T. [eds.

    2000-06-01

    This is the proceeding of 'study on numerical methods related to plasma confinement' held in National Institute for Fusion Science. In this workshop, theoretical and numerical analyses of possible plasma equilibria with their stability properties are presented. There are also various lectures on mathematical as well as numerical analyses related to the computational methods for fluid dynamics and plasma physics. Separate abstracts were presented for 13 of the papers in this report. The remaining 6 were considered outside the subject scope of INIS. (J.P.N.)

  4. PREFACE: 3rd Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIII)

    Califano, Marco; Migliorato, Max; Probert, Matt

    2012-05-01

    These conference proceedings contain the written papers of the contributions presented at the 3rd International Conference on Theory, Modelling and Computational Methods for Semiconductor materials and nanostructures. The conference was held at the School of Electronic and Electrical Engineering, University of Leeds, Leeds, UK on 18-20 January 2012. The previous conferences in this series took place in 2010 at St William's College, York and in 2008 at the University of Manchester, UK. The development of high-speed computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational, optical and electronic properties of semiconductors and their hetero- and nano-structures. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology, where there is substantial potential for time-saving in R&D. Theoretical approaches represented in this meeting included: Density Functional Theory, Tight Binding, Semiempirical Pseudopotential Methods, Effective Mass Models, Empirical Potential Methods and Multiscale Approaches. Topics included, but were not limited to: Optical and Transport Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Graphene, Lasers, Photonic Structures, Photovoltaic and Electronic Devices. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the theoretical modelling of Group IV, III-V and II-VI semiconductors, as well as students, postdocs and early-career researchers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students, with several lectures given by recognised experts in various theoretical approaches. The following two days showcased some of the best theoretical research carried out in the UK in this field, with several

  5. PREFACE: 4th Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIV)

    Tomić, Stanko; Probert, Matt; Migliorato, Max; Pal, Joydeep

    2014-06-01

    These conference proceedings contain the written papers of the contributions presented at the 4th International Conference on Theory, Modelling and Computational Methods for Semiconductor materials and nanostructures. The conference was held at the MediaCityUK, University of Salford, Manchester, UK on 22-24 January 2014. The previous conferences in this series took place in 2012 at the University of Leeds, in 2010 at St William's College, York and in 2008 at the University of Manchester, UK. The development of high-performance computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational, optical and electronic properties of semiconductors and their hetero- and nano-structures. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology, where there is substantial potential for time-saving in R&D. Theoretical approaches represented in this meeting included: Density Functional Theory, Semi-empirical Electronic Structure Methods, Multi-scale Approaches, Modelling of PV devices, Electron Transport, and Graphene. Topics included, but were not limited to: Optical Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Photonic Structures, and Electronic Devices. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the theoretical modelling of Group IV, III-V and II-VI semiconductors, as well as students, postdocs and early-career researchers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students, with several lectures given by recognized experts in various theoretical approaches. The following two days showcased some of the best theoretical research carried out in the UK in this field, with several contributions also from representatives of

  6. MICCAI Workshops

    Nedjati-Gilani, Gemma; Venkataraman, Archana; O'Donnell, Lauren; Panagiotaki, Eleftheria

    2014-01-01

    This volume contains the proceedings from two closely related workshops: Computational Diffusion MRI (CDMRI’13) and Mathematical Methods from Brain Connectivity (MMBC’13), held under the auspices of the 16th International Conference on Medical Image Computing and Computer Assisted Intervention, which took place in Nagoya, Japan, September 2013. Inside, readers will find contributions ranging from mathematical foundations and novel methods for the validation of inferring large-scale connectivity from neuroimaging data to the statistical analysis of the data, accelerated methods for data acquisition, and the most recent developments on mathematical diffusion modeling. This volume offers a valuable starting point for anyone interested in learning computational diffusion MRI and mathematical methods for brain connectivity as well as offers new perspectives and insights on current research challenges for those currently in the field. It will be of interest to researchers and practitioners in computer science, ...

  7. Seismic design assessment by experimental methods. Notes from the workshop. Working material

    NONE

    2001-07-01

    The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees.

  8. Seismic design assessment by experimental methods. Notes from the workshop. Working material

    2001-01-01

    The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees

  9. PREFACE: 1st METECH workshop - From deep-sea to coastal zones: Methods and Techniques for studying Palaeoenvironments

    Veiga-Pires, C.; St-Onge, G.

    2008-10-01

    Reconstructing past climate and past ocean circulation demands the highest possible precision and accuracy which urges the scientific community to look at different sediment records such as the ones from coastal zones to deep-sea with a more complete set of technical and methodological tools. However, the information given by each tool varies in precision, accuracy and in significance according to their environmental settings. It is therefore essential to compare tools. With that in mind, and as part of the International year of Planet Earth, a workshop entitled `From deep-sea to coastal zones: Methods and Techniques for studying palaeoenvironments' took place in Faro (Portugal), from 25-29 February 2008 in order to: present several methods and techniques that can be used for studying sediments from deep-sea to coastal zones, namely for reconstructing palaeoenvironments in order to document past climatic changes and short to long-term environmental processes; allow cross experience between different fields and specialties, either from deep-sea to coastal zones or from micropaleontology to geochemistry; give the opportunity to students from different universities and countries to attend the workshop; publish a special volume on the presented methods and techniques during the workshop. The workshop was organized in four non-parallel sessions dealing with the use of micropaleontology, isotopes, biogeochemistry and sedimentology, as tools for palaeoenvironmental studies. The present IOP Conference Series: Earth and Environmental Science proceedings reflect this organization and papers are published in each theme. The papers are either short reviews or case studies and are highlighted below. The remains of microorganisms found in sediments are the main proxies used in micropaleontological studies. However, the link between fossilized remains and their living origin is not easy to reconstruct only based on the geologic/sedimentary record. Accordingly, Barbosa presents a

  10. YEREVAN: Acceleration workshop

    Anon.

    1989-01-01

    Sponsored by the Yerevan Physics Institute in Armenia, a Workshop on New Methods of Charged Particle Acceleration in October near the Nor Amberd Cosmic Ray Station attracted participants from most major accelerator centres in the USSR and further afield

  11. Proceedings of a workshop on methods for neutron scattering instrumentation design

    Hjelm, R.P.

    1997-09-01

    The future of neutron and x-ray scattering instrument development and international cooperation was the focus of the workshop. The international gathering of about 50 participants representing 15 national facilities, universities and corporations featured oral presentations, posters, discussions and demonstrations. Participants looked at a number of issues concerning neutron scattering instruments and the tools used in instrument design. Objectives included: (1) determining the needs of the neutron scattering community in instrument design computer code and information sharing to aid future instrument development, (2) providing for a means of training scientists in neutron scattering and neutron instrument techniques, and (3) facilitating the involvement of other scientists in determining the characteristics of new instruments that meet future scientific objectives, and (4) fostering international cooperation in meeting these needs. The scope of the meeting included: (1) a review of x-ray scattering instrument design tools, (2) a look at the present status of neutron scattering instrument design tools and models of neutron optical elements, and (3) discussions of the present and future needs of the neutron scattering community. Selected papers were abstracted separately for inclusion to the Energy Science and Technology Database

  12. Proceedings of a workshop on methods for neutron scattering instrumentation design

    Hjelm, R.P. [ed.] [Los Alamos National Lab., NM (United States)

    1997-09-01

    The future of neutron and x-ray scattering instrument development and international cooperation was the focus of the workshop. The international gathering of about 50 participants representing 15 national facilities, universities and corporations featured oral presentations, posters, discussions and demonstrations. Participants looked at a number of issues concerning neutron scattering instruments and the tools used in instrument design. Objectives included: (1) determining the needs of the neutron scattering community in instrument design computer code and information sharing to aid future instrument development, (2) providing for a means of training scientists in neutron scattering and neutron instrument techniques, and (3) facilitating the involvement of other scientists in determining the characteristics of new instruments that meet future scientific objectives, and (4) fostering international cooperation in meeting these needs. The scope of the meeting included: (1) a review of x-ray scattering instrument design tools, (2) a look at the present status of neutron scattering instrument design tools and models of neutron optical elements, and (3) discussions of the present and future needs of the neutron scattering community. Selected papers were abstracted separately for inclusion to the Energy Science and Technology Database.

  13. Allergic contact dermatitis: epidemiology, molecular mechanisms, in vitro methods and regulatory aspects : Current knowledge assembled at an international workshop at BfR, Germany

    Peiser, M; Tralau, T; Heidler, J

    2012-01-01

    potential contact allergens. However, the local lymph node assay (LLNA) presently remains the validated method of choice for hazard identification and characterisation. At the workshop the use of the LLNA for regulatory purposes and for quantitative risk assessment was also discussed....

  14. Workshop report

    abp

    2017-09-14

    Sep 14, 2017 ... health: report of first EQUIST training workshop in Nigeria .... The difference between the before and after measurements was ... After the administration of the pre-workshop questionnaire the ... represent Likert rating scale of 1-5 points, where 1point = grossly .... Procedures Manual for the "Evaluating.

  15. INDICO Workshop

    CERN. Geneva; Fabbrichesi, Marco

    2004-01-01

    The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

  16. Overview of a workshop on screening methods for detecting potential (anti-) estrogenic/androgenic chemicals in wildlife

    Ankley, Gerald T.; Mihaich, Ellen; Stahl, Ralph G.; Tillitt, Donald E.; Colborn, Theo; McMaster, Suzzanne; Miller, Ron; Bantle, John; Campbell, Pamela; Denslow, Nancy; Dickerson, Richard L.; Folmar, Leroy C.; Fry, Michael; Giesy, John P.; Gray, L. Earl; Guiney, Patrick; Hutchinson, Thomas; Kennedy, Sean W.; Kramer, Vincent; LeBlanc, Gerald A.; Mayes, Monte; Nimrod, Alison; Patino, Reynaldo; Peterson, Richard; Purdy, Richard; Ringer, Robert; Thomas, Peter C.; Touart, Les; Van Der Kraak, Glen; Zacharewski, Tim

    1998-01-01

    The U.S. Congress has passed legislation requiring the U.S. Environmental Protection Agency (U.S. EPA) to develop, validate, and implement screening tests for identifying potential endocrine-disrupting chemicals within 3 years. To aid in the identification of methods suitable for this purpose, the U.S. EPA, the Chemical Manufacturers Association, and the World Wildlife Fund sponsored several workshops, including the present one, which dealt with wildlife species. This workshop was convened with 30 international scientists representing multiple disciplines in March 1997 in Kansas City, Missouri, USA. Participants at the meeting identified methods in terms of their ability to indicate (anti-) estrogenic/androgenic effects, particularly in the context of developmental and reproductive processes. Data derived from structure-activity relationship models and in vitro test systems, although useful in certain contexts, cannot at present replace in vivo tests as the sole basis for screening. A consensus was reached that existing mammalian test methods (e.g., with rats or mice) generally are suitable as screens for assessing potential (anti-) estrogenic/ androgenic effects in mammalian wildlife. However, due to factors such as among-class variation in receptor structure and endocrine function, it is uncertain if these mammalian assays would be of broad utility as screens for other classes of vertebrate wildlife. Existing full and partial life-cycle tests with some avian and fish species could successfully identify chemicals causing endocrine disruption; however, these long-term tests are not suitable for routine screening. However, a number of short-term tests with species from these two classes exist that could serve as effective screening tools for chemicals inducing (anti-) estrogenic/androgenic effects. Existing methods suitable for identifying chemicals with these mechanisms of action in reptiles and amphibians are limited, but in the future, tests with species from

  17. Test Particle Simulations of Electron Injection by the Bursty Bulk Flows (BBFs) using High Resolution Lyon-Feddor-Mobarry (LFM) Code

    Eshetu, W. W.; Lyon, J.; Wiltberger, M. J.; Hudson, M. K.

    2017-12-01

    Test particle simulations of electron injection by the bursty bulk flows (BBFs) have been done using a test particle tracer code [1], and the output fields of the Lyon-Feddor-Mobarry global magnetohydro- dynamics (MHD) code[2]. The MHD code was run with high resolu- tion (oct resolution), and with specified solar wind conditions so as to reproduce the observed qualitative picture of the BBFs [3]. Test par- ticles were injected so that they interact with earthward propagating BBFs. The result of the simulation shows that electrons are pushed ahead of the BBFs and accelerated into the inner magnetosphere. Once electrons are in the inner magnetosphere they are further energized by drift resonance with the azimuthal electric field. In addition pitch angle scattering of electrons resulting in the violation conservation of the first adiabatic invariant has been observed. The violation of the first adiabatic invariant occurs as electrons cross a weak magnetic field region with a strong gradient of the field perturbed by the BBFs. References 1. Kress, B. T., Hudson,M. K., Looper, M. D. , Albert, J., Lyon, J. G., and Goodrich, C. C. (2007), Global MHD test particle simulations of ¿ 10 MeV radiation belt electrons during storm sudden commencement, J. Geophys. Res., 112, A09215, doi:10.1029/2006JA012218. Lyon,J. G., Fedder, J. A., and Mobarry, C.M., The Lyon- Fedder-Mobarry (LFM) Global MHD Magnetospheric Simulation Code (2004), J. Atm. And Solar-Terrestrial Phys., 66, Issue 15-16, 1333- 1350,doi:10.1016/j.jastp. Wiltberger, Merkin, M., Lyon, J. G., and Ohtani, S. (2015), High-resolution global magnetohydrodynamic simulation of bursty bulk flows, J. Geophys. Res. Space Physics, 120, 45554566, doi:10.1002/2015JA021080.

  18. Engaging with economic evaluation methods: insights from small and medium enterprises in the UK medical devices industry after training workshops

    Craven Michael P

    2012-09-01

    Full Text Available Abstract Background With increased governmental interest in value assessment of technologies and where medical device manufacturers are finding it increasingly necessary to become more familiar with economic evaluation methods, the study sought to explore the levels of health economics knowledge within small and medium-sized enterprises (SMEs and to scope strategies they employ to demonstrate the value of their products to purchasers. Methods A short questionnaire was completed by participants attending one of five workshops on product development in the medical device sector that took place in England between 2007 and 2011. From all responses obtained, a large proportion of participants were based in SMEs (N = 43, and these responses were used for the analysis. Statistical analysis using non-parametric tests was performed on questions with approximately interval scales. Qualitative data from participant responses were analysed to reveal emerging themes. Results The questionnaire results revealed that 60% of SME participants (mostly company directors or managers, including product or project managers rated themselves as having low or no knowledge of health economics prior to the workshops but the rest professed at least medium knowledge. Clinical trials and cost analyses or cost-effectiveness studies were the most highly cited means by which SMEs aim to demonstrate value of products to purchasers. Purchasers were perceived to place most importance on factors of safety, expert opinion, cost-effectiveness and price. However many companies did not utilise formal decision-making tools to prioritise these factors. There was no significant dependence of the use of decision-making tools in general with respect to professed knowledge of health economics methods. SMEs did not state a preference for any particular aspect of potential value when deciding whether to develop a product. A majority of SMEs stated they would use a health economics tool

  19. Methods for promoting knowledge exchange and networking among young professionals in the aerospace sector-IAF's IPMC workshop 2013 insights

    Monzon, Amalio; Chow, Tiffany; Guthrie, Paul; Lu, Zhuoyan; Chuma, Constant; He, Huang; Kuzkov, Sergii

    2016-01-01

    During the next decades, the aerospace community will pursue goals such as human exploration beyond the Moon, commercialization and cost reduction of space activities or sustainability of air transport and space operations, bringing relevant economic, environmental and social benefits to the society. Young professionals development is a critical success factor to enable these goals and in consequence is an area of significant interest. This paper focuses on the methods for promoting knowledge exchange and networking among Young Professionals. On the one hand, it analyzes the different activities currently used for that purpose by the organizations of the sector as well as explores the opportunities to reinforce these methods. On the other hand, it presents the results of a survey addressed to Young Professionals and aimed at identifying their needs, expectations and benefits perceived in relation with these activities. This study was conducted as part of the IAF's (International Astronautical Federation) IPMC (International Programme/Project Management Committee) Workshop held during the International Astronautical Congress (IAC) 2013 in Beijing, whose objective was to provide Young Professionals a forum to share experiences and to discuss ideas and needs, and which counted with more than fifty delegates representing IAF member organizations from all around the world.

  20. Does a one-day workshop improve clinical faculty's comfort and behaviour in practising and teaching evidence-based medicine? A Canadian mixed methods study.

    Allen, David; Abourbih, Jacques; Maar, Marion; Boesch, Lisa; Goertzen, James; Cervin, Catherine

    2017-07-13

    The purpose of this study was to determine the impact of a 1-day evidence-based medicine (EBM) workshop on physician attitudes and behaviours around teaching and practicing EBM. A mixed methods study using a before/after cohort. A medical school delivering continuing professional development to 1250 clinical faculty over a large geographic area in Canada. 105 physician clinical faculty members. A 1-day workshop presented at 11 different sites over an 18-month period focusing on EBM skills for teaching and clinical practice. (1) A quantitative survey administered immediately before and after the workshop, and 3-6 months later, to assess the hypothesis that comfort with teaching and practising EBM can be improved.(2) A qualitative survey of the expectations for, and impact of the workshop on, participant behaviours and attitudes using a combination of pre, post and 3 to 6-month follow-up questionnaires, and telephone interviews completed 10-14 months after the workshop. Physician comfort with their EBM clinical skills improved on average by 0.93 points on a 5-point Likert scale, and comfort with EBM teaching skills by 0.97 points (p values 0.001). Most of this improvement was sustained 3-6 months later. Three to fourteen months after the workshop, half of responding participants reported that they were using the Population Intervention Comparator Outcome (PICO) methodology of question framing for teaching, clinical practice or both. Comfort in teaching and practicing EBM can be improved by a 1-day workshop, with most of this improvement sustained 3-6 months later. PICO question framing can be learnt at a 1-day workshop, and is associated with a self-reported change in clinical and teaching practice 3-14 months later. This represents both level 2 (attitudes) and level 3 (behaviours) change using the Kirkpatrick model of evaluation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial

  1. Engaging with economic evaluation methods: insights from small and medium enterprises in the UK medical devices industry after training workshops.

    Craven, Michael P; Allsop, Matthew J; Morgan, Stephen P; Martin, Jennifer L

    2012-09-03

    With increased governmental interest in value assessment of technologies and where medical device manufacturers are finding it increasingly necessary to become more familiar with economic evaluation methods, the study sought to explore the levels of health economics knowledge within small and medium-sized enterprises (SMEs) and to scope strategies they employ to demonstrate the value of their products to purchasers. A short questionnaire was completed by participants attending one of five workshops on product development in the medical device sector that took place in England between 2007 and 2011. From all responses obtained, a large proportion of participants were based in SMEs (N = 43), and these responses were used for the analysis. Statistical analysis using non-parametric tests was performed on questions with approximately interval scales. Qualitative data from participant responses were analysed to reveal emerging themes. The questionnaire results revealed that 60% of SME participants (mostly company directors or managers, including product or project managers) rated themselves as having low or no knowledge of health economics prior to the workshops but the rest professed at least medium knowledge. Clinical trials and cost analyses or cost-effectiveness studies were the most highly cited means by which SMEs aim to demonstrate value of products to purchasers. Purchasers were perceived to place most importance on factors of safety, expert opinion, cost-effectiveness and price. However many companies did not utilise formal decision-making tools to prioritise these factors. There was no significant dependence of the use of decision-making tools in general with respect to professed knowledge of health economics methods. SMEs did not state a preference for any particular aspect of potential value when deciding whether to develop a product. A majority of SMEs stated they would use a health economics tool. Research and development teams or marketing and sales

  2. Workshop Proceedings

    2012-01-01

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  3. Evaluating the impact of an intensive education workshop on evidence-informed decision making knowledge, skills, and behaviours: a mixed methods study.

    Yost, Jennifer; Ciliska, Donna; Dobbins, Maureen

    2014-01-17

    Health professionals require a unique set of knowledge and skills in order to meet increasing expectations to use research evidence to inform practice and policy decisions. They need to be able to find, access, interpret, and apply the best available research evidence, along with information about patient preferences, clinical expertise, and the clinical context and resources, to such decisions. This study determined preferences for continuing education following an intensive educational workshop and evaluated the impact of the workshop on evidence informed decision making (EIDM) knowledge, skills, and behaviours. An explanatory mixed methods, longitudinal study design was implemented among a convenience sample of various health care professionals attending the workshop. EIDM knowledge, skills, and behaviours were quantitatively measured at baseline and six month follow-up, with EIDM knowledge and skills measured additionally immediately following the educational workshop (post-test measurement). To determine participants preferences for continuing education, data were collected using quantitative survey (post-test measurement) and qualitative (individual telephone interviews after six-month follow-up) methods. EIDM knowledge and skills increased significantly from baseline to immediately following the intervention [5.6, 95% CI (3.7, 7.4), P skills and EIDM behaviours (r = 0.29, P 0.069 and r = 0.24, P 0.136, respectively). Over time there was a shift in preferences for timing and frequency of online continuing education strategies. Willingness to participate in continuing education, however, remained evident. An intensive educational workshop shows promise for increasing EIDM knowledge and skills. Increasing EIDM knowledge and skills may promote the capacity of health professionals to use research evidence when making practice and policy decisions and, in turn, lead to positive patient outcomes.

  4. Comparing Coral Reef Survey Methods. Unesco Reports in Marine Science No. 21 Report of a Regional Unesco/UNEP Workshop on Coral Reef Survey Management and Assessment Methods in Asia and the Pacific (Phuket, Thailand, December 13-17, 1982).

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Marine Sciences.

    This report includes nine papers prepared for a workshop on coral reef survey management and assessment methods in Asia and the Pacific. The papers are: "A Contrast in Methodologies between Surveying and Testing" (Charles Birkeland); "Coral Reef Survey Methods in the Andaman Sea" (Hansa Chansang); "A Review of Coral Reef…

  5. SIMPLE METHODS FOR INCREASING THE PRODUCTIVITY IN A WORKSHOP OF TEXTILE GARMENTS

    PORAV Viorica

    2014-05-01

    Full Text Available This paper is based mainly on experience and is the result of optimization analysis of work operations in departments that make clothing products, with maximum 200 workers and financially unable to invest in expensive technical equipment. The analysis takes the problem of increasing productivity for some work operations, such as the operation of the realization of loops, cutting them to the required size, forming packages, for their application to the top of the pants. The analysis performed was concerned not only with increasing productivity but also to create better working conditions for workers. Of course, through a thorough analysis can be improved and other working methods. Ergonomic workplace organization, centralization of operations or handling study due to their repetitiveness, can result in significant savings of time working. Equally it may affect the operations times for making garments and methods of employment with cut marks and accessories needed, or how to discharge processed workpiece. This paper outlines some options for improving the performance of companies producing textiles, in idea of increasing labor productivity and product quality. Even if a firm producing textiles, has sufficient financial resources for modern equipment, the studies conducted by experts, can brings improvements in working time and this without high costs.

  6. (Re)interpreting LHC New Physics Search Results : Tools and Methods, 3rd Workshop

    The quest for new physics beyond the SM is arguably the driving topic for LHC Run2. LHC collaborations are pursuing searches for new physics in a vast variety of channels. Although collaborations provide various interpretations for their search results, the full understanding of these results requires a much wider interpretation scope involving all kinds of theoretical models. This is a very active field, with close theory-experiment interaction. In particular, development of dedicated methodologies and tools is crucial for such scale of interpretation. Recently, a Forum was initiated to host discussions among LHC experimentalists and theorists on topics related to the BSM (re)interpretation of LHC data, and especially on the development of relevant interpretation tools and infrastructure: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/InterpretingLHCresults Two meetings were held at CERN, where active discussions and concrete work on (re)interpretation methods and tools took place, with valuable cont...

  7. NATO Advanced Research Workshop on Vectorization of Advanced Methods for Molecular Electronic Structure

    1984-01-01

    That there have been remarkable advances in the field of molecular electronic structure during the last decade is clear not only to those working in the field but also to anyone else who has used quantum chemical results to guide their own investiga­ tions. The progress in calculating the electronic structures of molecules has occurred through the truly ingenious theoretical and methodological developments that have made computationally tractable the underlying physics of electron distributions around a collection of nuclei. At the same time there has been consider­ able benefit from the great advances in computer technology. The growing sophistication, declining costs and increasing accessibi­ lity of computers have let theorists apply their methods to prob­ lems in virtually all areas of molecular science. Consequently, each year witnesses calculations on larger molecules than in the year before and calculations with greater accuracy and more com­ plete information on molecular properties. We can surel...

  8. Workshop meeting

    Veland, Oeystein

    2004-04-01

    1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

  9. Network workshop

    Bruun, Jesper; Evans, Robert Harry

    2014-01-01

    This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

  10. Second Quaternary dating workshop

    NONE

    1999-11-01

    The second Quaternary dating methods workshop was held at Lucas Heights and sponsored by ANSTO and AINSE. Topics covered include, isotope and thermoluminescence dating, usage of accelerator and thermal ionisation mass spectrometry in environmental studies emphasizing on the methodologies used and sample preparation

  11. Second Quaternary dating workshop

    1999-01-01

    The second Quaternary dating methods workshop was held at Lucas Heights and sponsored by ANSTO and AINSE. Topics covered include, isotope and thermoluminescence dating, usage of accelerator and thermal ionisation mass spectrometry in environmental studies emphasizing on the methodologies used and sample preparation

  12. Virtual Workshop

    Buus, Lillian; Bygholm, Ann

    In relation to the Tutor course in the Mediterranean Virtual University (MVU) project, a virtual workshop “Getting experiences with different synchronous communication media, collaboration, and group work” was held with all partner institutions in January 2006. More than 25 key-tutors within MVU...

  13. International IPCC workshop on methane and nitrous oxide: methods in national emissions inventories and options for control

    Amstel, A.R. van (ed.)

    1993-07-01

    This workshop had two main objectives: to support the development of an internationally agreed methodology and reporting format for national emission inventories of greenhouse gases by mid 1993, as coordinated by the Science Working Group of the Intergovernmental Panel on Climate Change (IPCC) and the Organization for Economic Cooperation and Development (OECD); and the development of technical options for reduction of these greenhouse gases and the assessment of the socio-economic feasibility of these options. These proceedings contain the overview papers presented at the workshop, the background papers prepared for the working group sessions and the conclusions and recommendations of the working groups put forward during these sessions. 16 poster summaries are also included. During the workshop, 8 different sources of methane were discussed - oil and gas, coal mining, ruminants, animal waste, landfills and sewage treatments, combustion and industry, rice production and wetlands, and biomass burning - and 2 sources of nitrous oxide - agricultural soils and combustion and industry. All papers have been abstracted separately.

  14. Collider workshop

    Anon.

    1982-01-01

    The promise of initial results after the start of operations at CERN's SPS proton-antiproton collider and the prospects for high energy hadron collisions at Fermilab (Tevatron) and Brookhaven (ISABELLE) provided a timely impetus for the recent Topical Workshop on Forward Collider Physics', held at Madison, Wisconsin, from 10-12 December. It became the second such workshop to be held, the first having been in 1979 at the College de France, Paris. The 100 or so participants had the chance to hear preliminary results from the UA1, UA4 and UA5 experiments at the CERN SPS collider, together with other new data, including that from proton-antiproton runs at the CERN Intersecting Storage Rings

  15. Workshop presentations

    Sanden, Per-Olof; Edland, Anne; Reiersen, Craig; Mullins, Peter; Ingemarsson, Karl-Fredrik; Bouchard, Andre; Watts, Germaine; Johnstone, John; Hollnagel, Erik; Ramberg, Patric; Reiman, Teemu

    2009-01-01

    An important part of the workshop was a series of invited presentations. The presentations were intended to both provide the participants with an understanding of various organisational approaches and activities as well as to stimulate the exchange of ideas during the small group discussion sessions. The presentation subjects ranged from current organisational regulations and licensee activities to new organisational research and the benefits of viewing organisations from a different perspective. There were more than a dozen invited presentations. The initial set of presentations gave the participants an overview of the background, structure, and aims of the workshop. This included a short presentation on the results from the regulatory responses to the pre-workshop survey. Representatives from four countries (Sweden, Canada, Finland, and the United Kingdom) expanded upon their survey responses with detailed presentations on both regulatory and licensee safety-related organisational activities in their countries. There were also presentations on new research concerning how to evaluate safety critical organisations and on a resilience engineering perspective to safety critical organisations. Below is the list of the presentations, the slides of which being available in Appendix 2: 1 - Workshop Welcome (Per-Olof Sanden); 2 - CSNI Working Group on Human and Organisational Factors (Craig Reiersen); 3 - Regulatory expectations on justification of suitability of licensee organisational structures, resources and competencies (Anne Edland); 4 - Justifying the suitability of licensee organisational structures, resources and competencies (Karl-Fredrik Ingemarsson); 5 - Nuclear Organisational Suitability in Canada (Andre Bouchard); 6 - Designing and Resourcing for Safety and Effectiveness (Germaine Watts); 7 - Organisational Suitability - What do you need and how do you know that you've got it? (Craig Reiersen); 8 - Suitability of Organisations - UK Regulator's View (Peter

  16. Proceedings of the OECD-NEA workshop on the evaluation of defects, repair criteria and methods of repair for concrete structures on nuclear power plants

    2002-01-01

    The Committee on the Safety of Nuclear Installations (CSNI) of the OECD-NEA co-ordinates the NEA activities concerning the technical aspects of design, construction and operation of nuclear installations insofar as they affect the safety of such installations. In 1994, the CSNI approved a proposal to set up a Task Group under its Principal Working Group 3 (recently re-named as the Working Group on Integrity of Components and Structures (IAGE)) to study the need for a programme of international activities in the area of concrete structural integrity and ageing and how such a programme could be organised. The task group reviewed national and international activities in the area of ageing of nuclear power plant concrete structures and the relevant activities of other international agencies. A proposal for a CSNI programme of workshops was developed to address specific technical issues which were prioritised by OECD-NEA task group into three levels of priority: First Priority: loss of prestressing force in tendons of post-tensioned concrete structures; in-service inspection techniques for reinforced concrete structures having thick sections and areas not directly accessible for inspection. Second Priority: viability of development of a performance based database; response of degraded structures (including finite element analysis techniques). Third Priority: instrumentation and monitoring; repair methods; criteria for condition assessment. The working group has progressively worked through the priority list developed during the preliminary study carried out by the Task Group. Currently almost all of the three levels of priority are effectively complete, although in doing so the committee has identified other specific items worthy of consideration. By working logically through the list of priorities the committee has maintained a clarity of purpose which has been important in maintaining efficiency and achieving its objectives. The performance of the group has been

  17. Workshops som forskningsmetode

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

  18. Creating Fantastic PI Workshops

    Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

  19. Desnarrativas: workshop

    Ivânia Marques

    2014-08-01

    Full Text Available This is a report of a teacher workshop. It was an encounter among dialogues, pictures and possibilities of deconstruction in multiple directions. It enables studies inspiring debate in favor of images. Images are loaded with clichés and they risk breaking with the documentary/real character of photography. It leads us to think of the non-neutrality of an image and how the place is hegemonically imposed on us. It does away with blocking forces in a playful experimentation. The experimentation is extended into compositions with photographs, monotype printing, and different ways of perceiving space, dialogues, exchanges, poems and art.

  20. Workshop experience

    Georgina Holt

    2007-04-01

    Full Text Available The setting for the workshop was a heady mix of history, multiculturalism and picturesque riverscapes. Within the group there was, as in many food studies, a preponderance of female scientists (or ethnographers, but the group interacted on lively, non-gendered terms - focusing instead on an appreciation of locals food and enthusiasm for research shared by all, and points of theoretical variance within that.The food provided by our hosts was of the very highest eating and local food qualities...

  1. The AAAI-13 Conference Workshops

    Agrawal, Vikas; Archibald, Christopher; Bhatt, Mehul; Bui, Hung; Cook, Diane J.; Cortés, Juan; Geib, Christopher; Gogate, Vibhav; Guesgen, Hans W.; Jannach, Dietmar; Johanson, Michael; Kersting, Kristian; Konidaris, George; Kotthoff, Lars; Michalowski, Martin

    2013-01-01

    The AAAI-13 Workshop Program, a part of the 27th AAAI Conference on Artificial Intelligence, was held Sunday and Monday, July 14–15, 2013 at the Hyatt Regency Bellevue Hotel in Bellevue, Washington, USA. The program included 12 workshops covering a wide range of topics in artificial intelligence, including Activity Context-Aware System Architectures (WS-13-05); Artificial Intelligence and Robotics Methods in Computational Biology (WS-13-06); Combining Constraint Solving with Mining and Lear...

  2. Recent Workshops

    Wickens, F. J.

    Since the previous edition of ATLAS e-news, the NIKHEF Institute in Amsterdam has hosted not just one but two workshops related to ATLAS TDAQ activities. The first in October was dedicated to the Detector Control System (DCS). Just three institutes, CERN, NIKHEF and St Petersburg, provide the effort for the central DCS services, but each ATLAS sub-detector provides effort for their own controls. Some 30 people attended, including representatives for all of the ATLAS sub-detectors, representatives of the institutes working on the central services and the project leader of JCOP, which brings together common aspects of detector controls across the LHC experiments. During the three-day workshop the common components were discussed, and each sub-detector described their experiences and plans for their future systems. Whilst many of the components to be used are standard commercial components, a key custom item for ATLAS is the ELMB (Embedded Local Monitor Board). Prototypes for this have now been extensively test...

  3. Proceedings of the Workshop on Justifying the Suitability of Nuclear Licensee Organisational Structure, Resources and Competencies - Methods, Approaches and Good Practices

    2009-01-01

    The nuclear industry is currently facing a range of organisational challenges. The nuclear renaissance is resulting in renewed interest in new reactor build programmes; existing plants are being modernised; ageing plants and an ageing workforce are being replaced. The industry is developing new models of working in a competitive, and increasingly global market which has seen increased use of contractors and organisational change taking place at an unparalleled rate. It is clear that the way in which nuclear licensees' organisations are structured and resourced has a potential impact on nuclear safety. For example, nuclear safety may be challenged if organisational structures create uncertainty concerning authority and responsibilities or if nuclear safety functions are not adequately resourced. Inasmuch as this is so, then it is reasonable to expect both licensees and regulatory bodies to seek assurance that licensee organisations are suitable to manage nuclear safety and discharge the responsibilities associated with operating as a nuclear licensee. Although licensees should have the authority to organise their plant activities in different ways, they should also be able to demonstrate that they understand the potential impact that these activities may have on plant safety. They should be able to show how their organisations are designed to carry out these activities safely and effectively, and to verify that the nuclear safety functions are being delivered as expected. There is a growing interest from some nuclear regulatory bodies, as well as licensees, in methods and approaches that can be used to ensure that the licensee organisations are well structured and have sufficient resources and competencies to manage safety. To address these and other nuclear plant organisational safety-related issues a NEA/CSNI workshop was held in Uppsala (Sweden) hosted by the Swedish Radiation Safety Authority with support from the European Union's Joint Research Centre (JRC

  4. Impact of the Application of Redecision Methods in Executive Coaching Workshops on Psychological Wellbeing: a Quantitative Evaluation of Effectiveness

    Mark Widdowson

    2016-07-01

    Full Text Available Previous research has found that participants in redecision marathons experience increased personal growth and improvements in psychological well-being (McNeel, 1982; Noriega-Gayol, 1997; Widdowson & Rosseau, 2014. In this article, the authors conducted a quantitative analysis based on the use of the Ryff Scales of Psychological Wellbeing to determine whether participants (n=49 at an executive coaching redecision marathon would experience an increase in psychological well-being. The findings show statistically significant improvements in psychological well-being overall, and specifically within the sub-scales of autonomy, environmental mastery, personal growth and self-acceptance, suggesting that redecision-based workshops are effective for improving subjective psychological well-being.

  5. Solar workshops financial incentives

    None

    1979-01-01

    Ten one-day workshops were held across the United States. Information in this workbook is compiled in conjunction with those workshops. The following discussions are included: solar as a fuel (history); why alternative fuels are being sought today; the need for conservation; advantages of solar energy; the potential of solar energy; why solar energy is not more widely used; a definition of solar; how solar can help meet energy demands; Federal policies and programs; what solar technologies exist today that can be effectively utilized (thermal applications, fuels from biomass, solar electric). Additional information is presented in three attachments: Energy-Conserving Methods; Domestic Policy Review of Solar Energy; and DOE Secretary's Annual Report to Congress-Solar Section. (MCW)

  6. Workshop on selected aspects of radiochemistry

    1991-11-01

    The aspects chosen for the workshop are: isotope preparation, separation methods; radiochemical methods and analyses; environmental protection and radiochemistry; the chemistry of the fifth halogen, astatine. From the 28 contributions presented at the workshop, 24 are of relevance in the INIS and EDB scope and are separately retrievable from the database. (BBR) [de

  7. The Future Workshop: Democratic problem solving

    Vidal, Rene Victor Valqui

    2005-01-01

    The origins, principles and practice of a very popular method known as The Future Workshop are presented. The fundamental theory and principles of this method are presented in an introductory way. In addition, practical guidelines to carry out such a workshop are outlined and several types of app...

  8. N Reactor Lessons Learned workshop

    Heaberlin, S.W.

    1993-07-01

    This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

  9. Auroral Tomography Workshop, Proceedings

    Steen, Aa.

    1993-08-01

    In ionospheric and atmospheric physics the importance of multi-station imaging has grown as a consequence of the availability of scientific grade CCD cameras with digital output and affordable massive computing power. Tomographic inversion techniques are used in many different areas, e.g. medicine, plasma research and space physics. The tomography workshop was announced to gather a limited group of people interested in auroral tomography or tomographic inversion methods in general. ALIS (Auroral Large Imaging System) is a multi-station ground-based system developed primarily for three-dimensional auroral imaging, however other non-auroral objects can be studied with ALIS, e.g. stratospheric clouds. Several of the contributions in the workshop dealt with problems related to geometries similar to the ALIS-configuration. The Proceedings contain written contributions received either in abstract form or as full papers. The Proceedings also contain contributions intended for the Workshop but not presented due to the absence of the speaker. Separate abstracts have been prepared for 15 of the 17 papers

  10. WORKSHOP: Stable particle motion

    Ruggiero, Alessandro G.

    1993-01-01

    Full text: Particle beam stability is crucial to any accelerator or collider, particularly big ones, such as Brookhaven's RHIC heavy ion collider and the larger SSC and LHC proton collider schemes. A workshop on the Stability of Particle Motion in Storage Rings held at Brookhaven in October dealt with the important issue of determining the short- and long-term stability of single particle motion in hadron storage rings and colliders, and explored new methods for ensuring it. In the quest for realistic environments, the imperfections of superconducting magnets and the effects of field modulation and noise were taken into account. The workshop was divided into three study groups: Short-Term Stability in storage rings, including chromatic and geometric effects and correction strategies; Long-Term Stability, including modulation and random noise effects and slow varying effects; and Methods for determining the stability of particle motion. The first two were run in parallel, but the third was attended by everyone. Each group considered analytical, computational and experimental methods, reviewing work done so far, comparing results and approaches and underlining outstanding issues. By resolving conflicts, it was possible to identify problems of common interest. The workshop reaffirmed the validity of methods proposed several years ago. Major breakthroughs have been in the rapid improvement of computer capacity and speed, in the development of more sophisticated mathematical packages, and in the introduction of more powerful analytic approaches. In a typical storage ring, a particle may be required to circulate for about a billion revolutions. While ten years ago it was only possible to predict accurately stability over about a thousand revolutions, it is now possible to predict over as many as one million turns. If this trend continues, in ten years it could become feasible to predict particle stability over the entire storage period. About ninety participants

  11. Optical Network Testbeds Workshop

    Joe Mambretti

    2007-06-01

    This is the summary report of the third annual Optical Networking Testbed Workshop (ONT3), which brought together leading members of the international advanced research community to address major challenges in creating next generation communication services and technologies. Networking research and development (R&D) communities throughout the world continue to discover new methods and technologies that are enabling breakthroughs in advanced communications. These discoveries are keystones for building the foundation of the future economy, which requires the sophisticated management of extremely large qualities of digital information through high performance communications. This innovation is made possible by basic research and experiments within laboratories and on specialized testbeds. Initial network research and development initiatives are driven by diverse motives, including attempts to solve existing complex problems, the desire to create powerful new technologies that do not exist using traditional methods, and the need to create tools to address specific challenges, including those mandated by large scale science or government agency mission agendas. Many new discoveries related to communications technologies transition to wide-spread deployment through standards organizations and commercialization. These transition paths allow for new communications capabilities that drive many sectors of the digital economy. In the last few years, networking R&D has increasingly focused on advancing multiple new capabilities enabled by next generation optical networking. Both US Federal networking R&D and other national R&D initiatives, such as those organized by the National Institute of Information and Communications Technology (NICT) of Japan are creating optical networking technologies that allow for new, powerful communication services. Among the most promising services are those based on new types of multi-service or hybrid networks, which use new optical networking

  12. Workshop introduction

    Streeper, Charles

    2010-01-01

    The Department of Energy's National Nuclear Security Administration's Global Threat Reduction Initiative (GTRI) has three subprograms that directly reduce the nuclear/radiological threat; Convert (Highly Enriched Uranium), Protect (Facilities), and Remove (Materials). The primary mission of the Off-Site Source Recovery Project (OSRP) falls under the 'Remove' subset. The purpose of this workshop is to provide a venue for joint-technical collaboration between the OSRP and the Nuclear Radiation Safety Service (NRSS). Eisenhower's Atoms for Peace initiative and the Soviet equivalent both promoted the spread of the paradoxical (peaceful and harmful) properties of the atom. The focus of nonproliferation efforts has been rightly dedicated to fissile materials and the threat they pose. Continued emphasis on radioactive materials must also be encouraged. An unquantifiable threat still exists in the prolific quantity of sealed radioactive sources (sources) spread worldwide. It does not appear that the momentum of the evolution in the numerous beneficial applications of radioactive sources will subside in the near future. Numerous expert studies have demonstrated the potentially devastating economic and psychological impacts of terrorist use of a radiological dispersal or emitting device. The development of such a weapon, from the acquisition of the material to the technical knowledge needed to develop and use it, is straightforward. There are many documented accounts worldwide of accidental and purposeful diversions of radioactive materials from regulatory control. The burden of securing sealed sources often falls upon the source owner, who may not have a disposal pathway once the source reaches the end of its useful life. This disposal problem is exacerbated by some source owners not having the resources to safely and compliantly store them. US Nuclear Regulatory Commission (NRC) data suggests that, in the US alone, there are tens of thousands of high-activity (IAEA

  13. IPHE Infrastructure Workshop Proceedings

    None

    2010-02-01

    This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

  14. Final Technical Report: Electronic Structure Workshop (ES13)

    Zhang, Shiwei [College of William and Mary, Williamsburg, VA (United States)

    2015-02-26

    The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

  15. Workshops as a Research Methodology

    Ørngreen, Rikke; Levinsen, Karin

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

  16. Workshop objectives and structure

    2004-01-01

    The overall aim of the Workshop was to create a platform in order to better understand different approaches to managing uncertainty in post-closure safety cases and regulatory approaches in different national waste management programmes. The principal objectives of the Workshop were to: - To identify common elements in different approaches for managing uncertainty. - To facilitate information exchange and to promote discussion on different technical approaches to the management and characterisation of uncertainty and on the role of risk. - To explore the merits of alternative approaches to risk-informed decision making. - To identify the potential for further developments of methods or strategies to support the management of uncertainties. The workshop was organised into plenary sessions and working group discussions: The first plenary session focused on establishing a framework for understanding the management of uncertainties and the use of risk. It comprised oral presentations drawing on a range of experience from both active participants in the development and assessment of safety cases and keynotes presentations by external participants involved in risk management in other sectors. The working group discussions covered three technical themes: Risk management and decision making. Regulatory requirements and review of uncertainty and risk in safety cases. Practical approaches and tools for the management of uncertainties and the assignment of probabilities, the use of expert judgements, and the presentation of information on uncertainties and risk were examined. The aim of the working groups was to develop an understanding of the specific issues, and to identify any further activities that will support the development and/or evaluation of safety cases. The round up plenary session brought together information and conclusions from each of the working groups. Common elements in the different approaches to treating uncertainty and risk were identified, along with

  17. ICP-MS Workshop

    Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-11-01

    This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

  18. Workshop on momentum distributions: Summary

    Simmons, R.O.

    1988-01-01

    This has been an extraordinary Workshop touching many branches of physics. The Workshop has treated momentum distributions in fluid and solid condensed matter, in nuclei, and in electronic systems. Both theoretical and experimental concepts and methods have been considered in all these branches. A variety of specific illustrations and applications in physical systems have been presented. One finds that some common unifying themes emerge. One finds, also, that some examples are available to illustrate where one branch is more mature than others and to contrast where expectations for future progress may be most encouraged. 6 refs., 2 figs

  19. Extreme Conditions Modeling Workshop Report

    Coe, R. G.; Neary, V. S.; Lawson, M. J.; Yu, Y.; Weber, J.

    2014-07-01

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, NM on May 13th-14th, 2014. The objective of the workshop was to review the current state of knowledge on how to model WECs in extreme conditions (e.g. hurricanes and other large storms) and to suggest how U.S. Department of Energy (DOE) and national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry.

  20. Extreme Conditions Modeling Workshop Report

    Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-07-01

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

  1. Waterloo Workshop on Computer Algebra

    Zima, Eugene; WWCA-2016; Advances in computer algebra : in honour of Sergei Abramov's' 70th birthday

    2018-01-01

    This book discusses the latest advances in algorithms for symbolic summation, factorization, symbolic-numeric linear algebra and linear functional equations. It presents a collection of papers on original research topics from the Waterloo Workshop on Computer Algebra (WWCA-2016), a satellite workshop of the International Symposium on Symbolic and Algebraic Computation (ISSAC’2016), which was held at Wilfrid Laurier University (Waterloo, Ontario, Canada) on July 23–24, 2016.   This workshop and the resulting book celebrate the 70th birthday of Sergei Abramov (Dorodnicyn Computing Centre of the Russian Academy of Sciences, Moscow), whose highly regarded and inspirational contributions to symbolic methods have become a crucial benchmark of computer algebra and have been broadly adopted by many Computer Algebra systems.

  2. International workshop on calorimeter simulation

    Filges, D.; Cloth, P.

    1988-10-01

    The aim of the Juelich workshop was to provide an overview of the state of calorimeter simulation and the methods used. This resulted in 29 contributions to the following topics: Code systems relevant to calorimeter simulation, vectorization and code speed-up, simulation of calorimeter experiments, special applications of calorimeter simulation. This report presents the viewgraphs of the given talks. (orig./HSI)

  3. HTTR workshop (workshop on hydrogen production technology)

    Shiina, Yasuaki; Takizuka, Takakazu

    2004-12-01

    Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

  4. The ATLAS Electromagnetic Calorimeter Calibration Workshop

    Hong Ma; Isabelle Wingerter

    The ATLAS Electromagnetic Calorimeter Calibration Workshop took place at LAPP-Annecy from the 1st to the 3rd of October; 45 people attended the workshop. A detailed program was setup before the workshop. The agenda was organised around very focused presentations where questions were raised to allow arguments to be exchanged and answers to be proposed. The main topics were: Electronics calibration Handling of problematic channels Cluster level corrections for electrons and photons Absolute energy scale Streams for calibration samples Calibration constants processing Learning from commissioning Forty-five people attended the workshop. The workshop was on the whole lively and fruitful. Based on years of experience with test beam analysis and Monte Carlo simulation, and the recent operation of the detector in the commissioning, the methods to calibrate the electromagnetic calorimeter are well known. Some of the procedures are being exercised in the commisssioning, which have demonstrated the c...

  5. Applied antineutrino physics workshop

    Lund, James C.

    2008-01-01

    This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

  6. 2016 MICCAI Workshop

    Ghosh, Aurobrata; Kaden, Enrico; Rathi, Yogesh; Reisert, Marco

    2017-01-01

    This volume offers a valuable starting point for anyone interested in learning computational diffusion MRI and mathematical methods for brain connectivity, while also sharing new perspectives and insights on the latest research challenges for those currently working in the field. Over the last decade, interest in diffusion MRI has virtually exploded. The technique provides unique insights into the microstructure of living tissue and enables in-vivo connectivity mapping of the brain. Computational techniques are key to the continued success and development of diffusion MRI and to its widespread transfer into the clinic, while new processing methods are essential to addressing issues at each stage of the diffusion MRI pipeline: acquisition, reconstruction, modeling and model fitting, image processing, fiber tracking, connectivity mapping, visualization, group studies and inference. These papers from the 2016 MICCAI Workshop “Computational Diffusion MRI” – which was intended to provide a snapshot of the la...

  7. 2014 MICCAI Workshop

    Nedjati-Gilani, Gemma; Rathi, Yogesh; Reisert, Marco; Schneider, Torben

    2014-01-01

    This book contains papers presented at the 2014 MICCAI Workshop on Computational Diffusion MRI, CDMRI’14. Detailing new computational methods applied to diffusion magnetic resonance imaging data, it offers readers a snapshot of the current state of the art and covers a wide range of topics from fundamental theoretical work on mathematical modeling to the development and evaluation of robust algorithms and applications in neuroscientific studies and clinical practice.   Inside, readers will find information on brain network analysis, mathematical modeling for clinical applications, tissue microstructure imaging, super-resolution methods, signal reconstruction, visualization, and more. Contributions include both careful mathematical derivations and a large number of rich full-color visualizations.   Computational techniques are key to the continued success and development of diffusion MRI and to its widespread transfer into the clinic. This volume will offer a valuable starting point for anyone interested i...

  8. Workshop on acceleration of the validation and regulatory acceptance of alternative methods and implementation of testing strategies

    Piersma, A. H.; Burgdorf, T.; Louekari, K.

    2018-01-01

    concerning the regulatory acceptance and implementation of alternative test methods and testing strategies, with the aim to develop feasible solutions. Classical validation of alternative methods usually involves one to one comparison with the gold standard animal study. This approach suffers from...... the reductionist nature of an alternative test as compared to the animal study as well as from the animal study being considered as the gold standard. Modern approaches combine individual alternatives into testing strategies, for which integrated and defined approaches are emerging at OECD. Furthermore, progress......-focused hazard and risk assessment of chemicals requires an open mind towards stepping away from the animal study as the gold standard and defining human biologically based regulatory requirements for human hazard and risk assessment....

  9. The Future Workshop: Democratic problem solving

    Rene Victor Valqui Vidal

    2006-03-01

    Full Text Available The origins, principles and practice of a very popular method known as The Future Workshop are presented. The fundamental theory and principles of this method are presented in an introductory way. In addition, practical guidelines to carry out such a workshop are outlined and several types of applications are shortly described. The crucial importance of both the facilitation process and the use of creative tools in team work are enhanced.

  10. Systems Engineering Workshops | Wind | NREL

    Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

  11. Application of an immunoassay method to improve the diagnosis and control of African trypanosomosis. Proceedings of the workshop

    1997-02-01

    The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture supports the introduction and use of nuclear and related techniques in developing countries through co-ordinated research programmes. A co-ordinated research programme (CRP) entitled ''Improving the diagnosis and control of trypanosomosis and other research programme (CRP) entitled ''Improving the diagnosis and control of trypanosomosis and other vector-borne diseases of African livestock using immunoassay methods'' was executed from 1987 to 1993 with funding from the Directorate General of Development Co-operation (DGIS) of the Netherlands. A total of 12 reports by the various Research Contract holders were compiled and published as a Technical Document (IAEA-TECDOC-707) together with conclusions, recommendations and reports by experts in the field. Refs, figs tabs

  12. Application of an immunoassay method to improve the diagnosis and control of African trypanosomosis. Proceedings of the workshop

    NONE

    1997-02-01

    The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture supports the introduction and use of nuclear and related techniques in developing countries through co-ordinated research programmes. A co-ordinated research programme (CRP) entitled ``Improving the diagnosis and control of trypanosomosis and other research programme (CRP) entitled ``Improving the diagnosis and control of trypanosomosis and other vector-borne diseases of African livestock using immunoassay methods`` was executed from 1987 to 1993 with funding from the Directorate General of Development Co-operation (DGIS) of the Netherlands. A total of 12 reports by the various Research Contract holders were compiled and published as a Technical Document (IAEA-TECDOC-707) together with conclusions, recommendations and reports by experts in the field. Refs, figs tabs.

  13. Mathematical methods in material science and large scale optimization workshops: Final report, June 1, 1995-November 30, 1996

    Friedman, A. [Minnesota Univ., Minneapolis, MN (United States). Inst. for Mathematics and Its Applications

    1996-12-01

    The summer program in Large Scale Optimization concentrated largely on process engineering, aerospace engineering, inverse problems and optimal design, and molecular structure and protein folding. The program brought together application people, optimizers, and mathematicians with interest in learning about these topics. Three proceedings volumes are being prepared. The year in Materials Sciences deals with disordered media and percolation, phase transformations, composite materials, microstructure; topological and geometric methods as well as statistical mechanics approach to polymers (included were Monte Carlo simulation for polymers); miscellaneous other topics such as nonlinear optical material, particulate flow, and thin film. All these activities saw strong interaction among material scientists, mathematicians, physicists, and engineers. About 8 proceedings volumes are being prepared.

  14. 77 FR 31371 - Public Workshop: Privacy Compliance Workshop

    2012-05-25

    ... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

  15. Tandem mirror theory workshop

    1981-05-01

    The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

  16. Innovative confinement concepts workshop

    Kirkpatrick, R.C.

    1998-01-01

    The Innovative Confinement Concepts Workshop occurred in California during the week preceding the Second Symposium on Current Trends in International Fusion Research. An informal report was made to the Second Symposium. A summary of the Workshop concluded that some very promising ideas were presented, that innovative concept development is a central element of the restructured US DOE. Fusion Energy Sciences program, and that the Workshop should promote real scientific progress in fusion

  17. Emergency response workers workshop

    Agapeev, S.A.; Glukhikh, E.N.; Tyurin, R.L.

    2012-01-01

    A training workshop entitled Current issues and potential improvements in Rosatom Corporation emergency prevention and response system was held in May-June, 2012. The workshop combined theoretical training with full-scale practical exercise that demonstrated the existing innovative capabilities for radiation reconnaissance, diving equipment and robotics, aircraft, emergency response and rescue hardware and machinery. This paper describes the activities carried out during the workshop [ru

  18. Emerging methods and tools for environmental risk assessment, decision-making, and policy for nanomaterials: summary of NATO Advanced Research Workshop

    Linkov, I; Steevens, J; Adlakha-Hutcheon, G

    2009-01-01

    and the environment. A unique feature of this workshop was its interdisciplinary nature and focus on the practical needs of policy decision makers. Workshop presentations and discussion panels were structured along four main themes: technology and benefits, human health risk, environmental risk, and policy......Nanomaterials and their associated technologies hold promising opportunities for the development of new materials and applications in a wide variety of disciplines, including medicine, environmental remediation, waste treatment, and energy conservation. However, current information regarding...... the environmental effects and health risks associated with nanomaterials is limited and sometimes contradictory. This article summarizes the conclusions of a 2008 NATO workshop designed to evaluate the wide-scale implications (e.g., benefits, risks, and costs) of the use of nanomaterials on human health...

  19. The workload analysis in welding workshop

    Wahyuni, D.; Budiman, I.; Tryana Sembiring, M.; Sitorus, E.; Nasution, H.

    2018-03-01

    This research was conducted in welding workshop which produces doors, fences, canopies, etc., according to customer’s order. The symptoms of excessive workload were seen from the fact of employees complaint, requisition for additional employees, the lateness of completion time (there were 11 times of lateness from 28 orders, and 7 customers gave complaints). The top management of the workshop assumes that employees’ workload was still a tolerable limit. Therefore, it was required workload analysis to determine the number of employees required. The Workload was measured by using a physiological method and workload analysis. The result of this research can be utilized by the workshop for a better workload management.

  20. IAEA monitoring field trials workshop

    Ross, H.H.; Cooley, J.N.; Belew, W.L.

    1995-01-01

    Recent safeguards inspections in Iraq and elsewhere by the International Atomic Energy Agency (IAEA) have led to the supposition that environmental monitoring can aid in verifying declared and in detecting undeclared nuclear activities or operations. This assumption was most recently examined by the IAEA's Standing Advisory Group on Safeguards Implementation (SAGSI), in their reports to the IAEA Board of Governors. In their reports, SAGSI suggested that further assessment and development of environmental monitoring would be needed to fully evaluate its potential application to enhanced IAEA safeguards. Such an inquiry became part of the IAEA ''Programme 93+2'' assessment of measures to enhance IAEA safeguards. In March, 1994, the International Safeguards Group at Oak Ridge hosted an environmental monitoring field trial workshop for IAEA inspectors to train them in the techniques needed for effective environmental sampling. The workshop included both classroom lectures and actual field sampling exercises. The workshop was designed to emphasize the analytical infrastructure needed for an environmental program, practical sampling methods, and suggested procedures for properly planning a sampling campaign. Detailed techniques for swipe, vegetation, soil, biota, and water associated sampling were covered. The overall approach to the workshop, and observed results, are described

  1. Alternate fusion fuels workshop

    1981-06-01

    The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached

  2. MOOC Design Workshop

    Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

    2016-01-01

    For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

  3. NOMA 2013 International Workshop

    Fournier-Prunaret, Danièle; Nishio, Yoshifumi; Grácio, Clara

    2015-01-01

    In the field of Dynamical Systems, nonlinear iterative processes play an important role. Nonlinear mappings can be found as immediate models for many systems from different scientific areas, such as engineering, economics, biology, or can also be obtained via numerical methods permitting to solve non-linear differential equations. In both cases, the understanding of specific dynamical behaviors and phenomena is of the greatest interest for scientists. This volume contains papers that were presented at the International Workshop on Nonlinear Maps and their Applications (NOMA 2013) held in Zaragoza, Spain, on September 3-4, 2013. This kind of collaborative effort is of paramount importance in promoting communication among the various groups that work in dynamical systems and networks in their research theoretical studies as well as for applications. This volume is suitable for graduate students as well as researchers in the field.

  4. Workshop on Computational Optimization

    2016-01-01

    This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2014, held at Warsaw, Poland, September 7-10, 2014. The book presents recent advances in computational optimization. The volume includes important real problems like parameter settings for controlling processes in bioreactor and other processes, resource constrained project scheduling, infection distribution, molecule distance geometry, quantum computing, real-time management and optimal control, bin packing, medical image processing, localization the abrupt atmospheric contamination source and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks.

  5. Workshop on Computational Optimization

    2015-01-01

    Our everyday life is unthinkable without optimization. We try to minimize our effort and to maximize the achieved profit. Many real world and industrial problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2013. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, resource constrained project scheduling, problems arising in transport services, error correcting codes, optimal system performance and energy consumption and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others.

  6. Student interaction in workshops

    Evers, Winie

    2014-01-01

    A kind of teaching for active learning has been experimented with at SDU Sønderborg as part of the course Supply Chain Dynamics. In this course the students learn about complex systems, system dynamics as well as supply chain instability and oscillation, the course lecturer invited the author...... to experiment with novel workshop methods and techniques, where objects are used to illustrate and model business issues (Heinemann et al, 2011, Buur et al, 2013). The idea was to see how students could be engaged in a different and more interactive way to learn about these topics, by assigning the students...... teaching should reflect this diversity by embracing and experimenting with multiple forms, including activation of students by students’ interaction and manipulation with objects....

  7. On the local field method with the account of spatial dispersion. Application to the optical activity theory

    Tyu, N. S.; Ekhilevsky, S. G.

    1992-07-01

    For the perfect molecular crystals the equations of the local field method (LFM) with the account of spatial dispersion are formulated. They are used to derive the expression for the crystal polarizability tensor. For the first time within the framework of this method the formula for the gyrotropy tensor of an arbitrary optically active molecular crystal is obtained. This formula is analog of well known relationships of Lorentz-Lorenz.

  8. Proceedings: 2001 ASME/EPRI Radwaste Workshop

    2001-01-01

    Nuclear utilities continually evaluate methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has increased the emphasis on this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

  9. Insider Threat Mitigation Workshop Instructional Materials

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodriquez, Jose [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2008-01-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt theft of nuclear materials. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat.

  10. Proceedings: 2000 ASME/EPRI Radwaste Workshop

    2001-01-01

    Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has added increased emphasis to this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technological and managerial improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

  11. Workshop of medical physics

    1988-01-01

    This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

  12. Workshops on Writing Science

    2017-09-30

    Sep 30, 2017 ... hands-on practice, feedback, mentoring and highly interactive sessions. The focus will be on work done as individuals and in teams. Maximum number of participants for the workshop is limited. The workshop is compulso- rily residential. Boarding and lodging free for selected candidates. Re-imbursement ...

  13. Warehouse Sanitation Workshop Handbook.

    Food and Drug Administration (DHHS/PHS), Washington, DC.

    This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

  14. SPLASH'13 workshops summary

    Balzer, S.; Schultz, U. P.

    2013-01-01

    Following its long-standing tradition, SPLASH 2013 will host 19 high-quality workshops, allowing their participants to meet and discuss research questions with peers, to mature new and exciting ideas, and to build up communities and start new collaborations. SPLASH workshops complement the main t...

  15. WORKSHOP: Radiofrequency superconductivity

    Tückmantel, Joachim

    1993-01-01

    Full text: With superconducting radiofrequency playing a major role in the push for new machines to break fresh physics frontiers, it has become a tradition for experts and newcomers in this field from all over the world to meet every second year to hear progress reports from laboratories and to discuss common problems and possible solutions. The sixth such workshop was held from 4-8 October under the chairmanship of Ron Sundelin at the Continuous Electron Beam Accelerator Facility (CEBAF) under construction in Newport News, Virginia. With 170 participants from 14 countries including Eastern Europe and China, it reflected the growing interest in the field - looking back to 1984, when CERN was the host laboratory, the second workshop had less than 100 participants. The CEBAF meeting began with laboratory status reports, covering both high beam energy ('high beta') applications with 'spherical' cavities (as with CERN's LEP200), all using niobium as superconductor and working between 352 MHz and 3 GHz, and lower energy (low beta') applications with geometrically more complicated shapes such as quarter or half wave, split ring or spoke resonators, some using electrodeposited lead as superconductor and working around 100 MHz. During these talks it became clear that more and more laboratories have focused on routine problems, such as reliable series production and testing, running cavities with ancillaries in the machines, or building complete prototypes for projects to be approved by critical funding authorities. This contrasts with the heady days just a few years ago when - at least in the high beta community - the main objective was to explore new ideas. State-of-the-art summaries showed how at 1.3 and 3 GHz 25-30 MV/m have been reached by several laboratories using different preparation methods. Newer developments for common problems included r.f. windows, couplers, controls, and especially field emission, public enemy number one for

  16. Risk Management Techniques and Practice Workshop Workshop Report

    Quinn, T; Zosel, M

    2008-12-02

    vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

  17. Proceedings of the CSNI/IAEA workshop on maintaining oversight of licensee safety culture - methods and approaches. Held from 21 to 23 May 2007 in Chester, UK

    2008-01-01

    Weaknesses in safety culture have contributed to a number of high profile events in the nuclear and other high hazard sectors. The nuclear industry also faces challenges such as deregulation, out-sourcing, phase-out, upgrading and new builds which, if not properly planned and implemented, have the potential to make a negative impact on safety culture. These factors have fostered an increasing awareness of the need for licensees to develop a strong safety culture to support successful and sustainable nuclear safety performance. Regulatory bodies are taking a growing interest in this issue, and several are actively working to develop and implement approaches to maintaining oversight of licensee safety culture. However, these approaches are not yet well-established, and it was considered prudent to share experiences and developing methodologies in order to disseminate good practices and avoid potential pitfalls. An NEA/CSNI/IAEA workshop was therefore held in Chester, UK, in May 2007 in order to explore and discuss the approaches that different regulatory bodies are taking to maintain oversight of licensee safety culture. It was organised by the UK Nuclear Installations Inspectorate on behalf of the CSNI's Working Group on Human and Organisational Factors. This report sets out the findings of the Chester workshop. The workshop was attended by 50 representatives of nuclear regulatory bodies in 20 countries plus IAEA, WANO, EU and NEA. It included both specialists in safety culture and site/resident inspectors, whose attendance was facilitated by the CNRA's Working Group on Inspection Practices. The workshop comprised structured discussion sessions, in which a set of issues were explored by small discussion groups and then discussed in plenary, complemented by short presentations on national regulatory positions. The workshop revealed a broad consensus that nuclear regulators should have processes in place to maintain oversight of licensee safety culture. The approaches

  18. Numerical and Evolutionary Optimization Workshop

    Trujillo, Leonardo; Legrand, Pierrick; Maldonado, Yazmin

    2017-01-01

    This volume comprises a selection of works presented at the Numerical and Evolutionary Optimization (NEO) workshop held in September 2015 in Tijuana, Mexico. The development of powerful search and optimization techniques is of great importance in today’s world that requires researchers and practitioners to tackle a growing number of challenging real-world problems. In particular, there are two well-established and widely known fields that are commonly applied in this area: (i) traditional numerical optimization techniques and (ii) comparatively recent bio-inspired heuristics. Both paradigms have their unique strengths and weaknesses, allowing them to solve some challenging problems while still failing in others. The goal of the NEO workshop series is to bring together people from these and related fields to discuss, compare and merge their complimentary perspectives in order to develop fast and reliable hybrid methods that maximize the strengths and minimize the weaknesses of the underlying paradigms. Throu...

  19. PV radiometrics workshop proceedings

    Myers, D.R.

    1995-09-01

    This report documents presentations and discussions held at the Photovoltaics Radiometeric Measurements Workshop conducted at Vail, Colorado, on July 24 and 25, 1995. The workshop was sponsored and financed by the Photovoltaic Module and Systems Performance and Engineering Project managed by Richard DeBlasio, Principal Investigator. That project is a component of the National Renewable Energy Laboratory (NREL) Photovoltaic Research and Development Program, conducted by NREL for the US Department of Energy, through the NREL Photovoltaic Engineering and Applications Branch, managed by Roland Hulstrom. Separate abstracts have been prepared for articles from this workshop.

  20. Nuclear Innovation Workshops Report

    Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

  1. Emerging methods and tools for environmental risk assessment, decision-making, and policy for nanomaterials: summary of NATO Advanced Research Workshop

    Linkov, Igor; Steevens, Jeffery; Adlakha-Hutcheon, Gitanjali; Bennett, Erin; Chappell, Mark; Colvin, Vicki; Davis, J. Michael; Davis, Thomas; Elder, Alison; Foss Hansen, Steffen; Hakkinen, Pertti Bert; Hussain, Saber M.; Karkan, Delara; Korenstein, Rafi; Lynch, Iseult; Metcalfe, Chris

    2009-01-01

    Nanomaterials and their associated technologies hold promising opportunities for the development of new materials and applications in a wide variety of disciplines, including medicine, environmental remediation, waste treatment, and energy conservation. However, current information regarding the environmental effects and health risks associated with nanomaterials is limited and sometimes contradictory. This article summarizes the conclusions of a 2008 NATO workshop designed to evaluate the wide-scale implications (e.g., benefits, risks, and costs) of the use of nanomaterials on human health and the environment. A unique feature of this workshop was its interdisciplinary nature and focus on the practical needs of policy decision makers. Workshop presentations and discussion panels were structured along four main themes: technology and benefits, human health risk, environmental risk, and policy implications. Four corresponding working groups (WGs) were formed to develop detailed summaries of the state-of-the-science in their respective areas and to discuss emerging gaps and research needs. The WGs identified gaps between the rapid advances in the types and applications of nanomaterials and the slower pace of human health and environmental risk science, along with strategies to reduce the uncertainties associated with calculating these risks.

  2. Workshop on environmental assessment

    Watson, E.C.

    1982-07-01

    Objectives of the workshop were: to review and evaluate the state-of-the-art of environmental impact assessments as applied to the regulation of applications of nuclear energy and related ancillary systems; to identify areas where existing technology allows establishing acceptable methods or standard practices that will meet the requirements of the NRC regulations, standards and guides for both normal operations and off-standard conditions including accident considerations; to illuminate topics where existing models or analytical methods are deficient because of unverified assumptions, a paucity of empirical data, conflicting results reported in the literature or a need for observation of operation systems; to compile, analyze and synthesize a prioritized set of research needs to advance the state-of-the-art to the level which will meet all of the requirements of the Commission's regulations, standards and guides; and to develop bases for maintaining the core of regulatory guidance at the optimum level balancing technical capabilities with practical considerations of cost and value to the regulatory process. The discussion held in small group sessions on aquatic, atmospheric, and terrestrial pathways are presented. The following research needs were identified as common to all three groups: validation of models; characterization of source terms; development of screening techniques; basis for de minimis levels of contamination; and updating of objectives for environmental monitoring programs

  3. WORKSHOPS: Radiofrequency superconductivity

    Anon.

    1992-01-01

    In the continual push towards higher energy particle beams, superconducting radiofrequency techniques now play a vital role, highlighted in the fifth workshop on radiofrequency superconductivity, held at DESY from 19 - 24 August 1991

  4. Transportation Management Workshop: Proceedings

    1993-10-01

    This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification.

  5. WORKSHOPS: Radiofrequency superconductivity

    Anon.

    1992-01-15

    In the continual push towards higher energy particle beams, superconducting radiofrequency techniques now play a vital role, highlighted in the fifth workshop on radiofrequency superconductivity, held at DESY from 19 - 24 August 1991.

  6. GammaWorkshops Proceedings

    Strålberg, Elisabeth; Klemola, Seppo; Nielsen, Sven Poul

    to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical...

  7. Cybernetics and Workshop Design.

    Eckstein, Daniel G.

    1979-01-01

    Cybernetic sessions allow for the investigation of several variables concurrently, resulting in a large volume of input compacted into a concise time frame. Three session questions are reproduced to illustrate the variety of ideas generated relative to workshop design. (Author)

  8. Transportation Management Workshop: Proceedings

    1993-01-01

    This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification

  9. Appalachian Stream Mitigation Workshop

    A 5 day workshop in 2011 developed for state and federal regulatory and resource agencies, who review, comment on and/or approve compensatory mitigation plans for surface coal mining projects in Appalachia

  10. Complex Flow Workshop Report

    none,

    2012-05-01

    This report documents findings from a workshop on the impacts of complex wind flows in and out of wind turbine environments, the research needs, and the challenges of meteorological and engineering modeling at regional, wind plant, and wind turbine scales.

  11. Second ICFA workshop

    Anon.

    1979-01-01

    A summary is given of the topics discussed at the second ICFA Workshop on 'Possibilities and Limitations of Accelerators and Detectors'. High energy accelerators are discussed, particularly electron-positron and proton-antiproton colliders. (W.D.L.).

  12. 2nd European Advanced Accelerator Concepts Workshop

    Assmann, Ralph; Grebenyuk, Julia; EAAC 2015

    2016-01-01

    The European Advanced Accelerator Concepts Workshop has the mission to discuss and foster methods of beam acceleration with gradients beyond state of the art in operational facilities. The most cost effective and compact methods for generating high energy particle beams shall be reviewed and assessed. This includes diagnostics methods, timing technology, special need for injectors, beam matching, beam dynamics with advanced accelerators and development of adequate simulations. This workshop is organized in the context of the EU-funded European Network for Novel Accelerators (EuroNNAc2), that includes 52 Research Institutes and universities.

  13. Workshop I: Gender Studies

    Hennessey, Eden; Kurup, Anitha; Meza-Montes, Lilia; Shastri, Prajval; Ghose, Shohini

    2015-12-01

    Participants in the Gender Studies workshop of the 5th IUPAP International Conference on Women in Physics discussed the gender question in science practice from a policy perspective, informed by investigations from the social science disciplines. The workshop's three sessions—"Equity and Education: Examining Gender Stigma in Science," "A Comparative Study of Women Scientists and Engineers: Experiences in India and the US," and "Toward Gender Equity Through Policy: Characterizing the Social Impact of Interventions—are summarized, and the resulting recommendations presented.

  14. TPC workshop summary

    Nygren, D.R.

    1984-01-01

    The Time Projection Chamber (TPC) concept is now nearly ten years old and, as is evident in this workshop, is still evolving in many directions. From the liquid xenon TPC for double beta decay studies to the impressively large second generation TPC for the LEP experiment ALEPH, the surprising diversity of current applications is apparent. This workshop, the first to concentrate solely on the TPC has provided a most congenial and rewarding occasion for all TPC enthusiasts to share experience, results, and ideas

  15. Industrial Fuel Flexibility Workshop

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  16. Reactor simulator development. Workshop material

    2001-01-01

    The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in reactor operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. This publication consists of course material for workshops on development of such reactor simulators. Participants in the workshops are provided with instruction and practice in the development of reactor simulation computer codes using a model development system that assembles integrated codes from a selection of pre-programmed and tested sub-components. This provides insight and understanding into the construction and assumptions of the codes that model the design and operational characteristics of various power reactor systems. The main objective is to demonstrate simple nuclear reactor dynamics with hands-on simulation experience. Using one of the modular development systems, CASSIM tm , a simple point kinetic reactor model is developed, followed by a model that simulates the Xenon/Iodine concentration on changes in reactor power. Lastly, an absorber and adjuster control rod, and a liquid zone model are developed to control reactivity. The built model is used to demonstrate reactor behavior in sub-critical, critical and supercritical states, and to observe the impact of malfunctions of various reactivity control mechanisms on reactor dynamics. Using a PHWR simulator, participants practice typical procedures for a reactor startup and approach to criticality. This workshop material consists of an introduction to systems used for developing reactor simulators, an overview of the dynamic simulation

  17. Summer workshops for high-school science teachers

    Young, H.H.; Kohl, J.

    1975-01-01

    A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

  18. Methods and successes of New York University workshops for science graduate students and post-docs in science writing for general audiences (readers and radio listeners)

    Hall, S. S.

    2012-12-01

    Scientists and science administrators often stress the importance of communication to the general public, but rarely develop educational infrastructures to achieve this goal. Since 2009, the Arthur L. Carter Journalism Institute at New York University has offered a series of basic and advanced writing workshops for graduate students and post-docs in NYU's eight scientific divisions (neuroscience, psychology, physics, biology, chemistry, mathematics, anthropology, and computer science). The basic methodology of the NYU approach will be described, along with successful examples of both written and radio work by students that have been either published or broadcast by general interest journalism outlets.

  19. The QED Workshop

    Pieper, G.W.

    1994-07-01

    On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

  20. t4 Workshop Report*

    Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

    2014-01-01

    Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042

  1. Workshop on confidence limits. Proceedings

    James, F.; Lyons, L.; Perrin, Y.

    2000-01-01

    The First Workshop on Confidence Limits was held at CERN on 17-18 January 2000. It was devoted to the problem of setting confidence limits in difficult cases: number of observed events is small or zero, background is larger than signal, background not well known, and measurements near a physical boundary. Among the many examples in high-energy physics are searches for the Higgs, searches for neutrino oscillations, B s mixing, SUSY, compositeness, neutrino masses, and dark matter. Several different methods are on the market: the CL s methods used by the LEP Higgs searches; Bayesian methods; Feldman-Cousins and modifications thereof; empirical and combined methods. The Workshop generated considerable interest, and attendance was finally limited by the seating capacity of the CERN Council Chamber where all the sessions took place. These proceedings contain all the papers presented, as well as the full text of the discussions after each paper and of course the last session which was a discussion session. The list of participants and the 'required reading', which was expected to be part of the prior knowledge of all participants, are also included. (orig.)

  2. WESTPAC Workshop on Coastal Transport of Pollutants (Tokyo, Japan, March 27-31, 1980). Summary Report. Workshop Report No. 24.

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Intergovernmental Oceanographic Commission.

    Provided is a 4-page summary of the WESTPAC (Western Pacific) Workshop On Coastal Transport of Pollutants and five appendices. Workshop objectives were to review present knowledge of the physical dispersion, accumulation, and transportation of pollutants, and analytical methods and data processing in the Western Pacific Region; identify major…

  3. Final Scientific EFNUDAT Workshop

    CERN. Geneva

    2010-01-01

    The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

  4. WALLTURB International Workshop

    Jimenez, Javier; Marusic, Ivan

    2011-01-01

    This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

  5. Vulcano Workshop 2016

    Mannocchi, G.; Morselli, A.; Trinchero, G.

    2016-01-01

    We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

  6. Measurement control workshop instructional materials

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

    2014-04-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  7. Measurement Control Workshop Instructional Materials

    Gibbs, Philip; Crawford, Cary; McGinnis, Brent

    2014-01-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  8. The Astronomy Workshop

    Hamilton, D. P.; Asbury, M. L.; Proctor, A.

    2001-12-01

    The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

  9. Proceedings of the CEATI 2010 distribution planning workshop

    2010-01-01

    This workshop provided a forum for electrical industry distribution experts to discuss methods of distribution planning that will ensure the provision of low-cost and reliable electrical service to present and future customers. Participants in the workshop discussed methods of integrating renewable energy resources, maximizing the use of existing assets, and reducing the carbon footprint of electric utilities. The effects of new loads on reliability, power quality, and voltage stability were considered. Planning distribution system modifications for the future were reviewed. The workshop provided an overview of distribution planning in relation to smart grids. The workshop included sessions on distribution planning for the 21. century; planning for a smarter grid; integrating renewable energy into the distribution system; and planning to manage reliability. The workshop featured 22 presentations, of which 16 have been catalogued separately for inclusion in this database. tabs., figs.

  10. Diagnostic Imaging Workshop

    Sociedad Argentina de Fisica Medica

    2012-01-01

    The American Association of Physicist in Medicine (AAPM), the International Organization for Medical Physics (IOMP) and the Argentina Society of Medical Physics (SAFIM) was organized the Diagnostic Imaging Workshop 2012, in the city of Buenos Aires, Argentina. This workshop was an oriented training and scientific exchange between professionals and technicians who work in medical physics, especially in the areas of diagnostic imaging, nuclear medicine and radiotherapy, with special emphasis on the use of multimodal imaging for radiation treatment, planning as well of quality assurance associates.

  11. Magnetic Suspension Technology Workshop

    Keckler, C.R.; Groom, N.J.; Britcher, C.P.

    1993-01-01

    In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

  12. DESY: QCD workshop

    Ingelman, Gunnar

    1994-01-01

    The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

  13. International development workshops. Final technical report

    1997-01-01

    The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ''International Workshop on Education in the Field of Radioactive Waste Management'' in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report

  14. International development workshops. Final technical report

    NONE

    1997-08-06

    The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ``International Workshop on Education in the Field of Radioactive Waste Management`` in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report.

  15. A mixed-method evaluation of peer-education workshops for school-aged children to teach about antibiotics, microbes and hygiene.

    Young, Vicki L; Cole, Amy; Lecky, Donna M; Fettis, Dennis; Pritchard, Beth; Verlander, Neville Q; Eley, Charlotte V; McNulty, Cliodna A M

    2017-07-01

    Delivering health topics in schools through peer education is known to be beneficial for all students involved. In this study, we have evaluated a peer-education workshop that aims to educate primary and secondary school students on hygiene, the spread of infection and antibiotics. Four schools in south-west England, in a range of localities, took part in peer-education workshops, with students completing before, after and knowledge-retention questionnaires. Mixed-effect logistic regression and mixed-effect linear regression were used to analyse the data. Data were analysed by topic, region and peer/non-peer-educator status. Qualitative interviews and focus groups with students and educators were conducted to assess changes in participants' skills, confidence and behaviour. Qualitative data indicated improvements in peer-educator skills and behaviour, including confidence, team-working and communication. There was a significant improvement in knowledge for all topics covered in the intervention, although this varied by region. In the antibiotics topic, peer-educators' knowledge increased in the retention questionnaire, whereas non-peer-educators' knowledge decreased. Knowledge declined in the retention questionnaires for the other topics, although this was mostly not significant. This study indicates that peer education is an effective way to educate young people on important topics around health and hygiene, and to concurrently improve communication skills. Its use should be encouraged across schools to help in the implementation of the National Institute for Health and Care Excellence (NICE) guidance that recommends children are taught in an age-appropriate manner about hygiene and antibiotics. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy.

  16. Proceedings. Feedstock preparation and quality 1997 workshop

    Mattsson, Jan Erik [ed.

    1998-06-01

    The IEA Bioenergy Feedstock Preparation and Quality 1997 Workshop dealt with fuel feedstock quality improvement and methods to determine feedstock properties. It was arranged by the Swedish Univ. of Agricultural Sciences on behalf of the IEA Bioenergy Task XII Activity 4.1 Feedstock Preparation and Quality. This Activity is a 3-year cooperation 1995-1997 between Denmark, Sweden and the USA, mainly based on information exchange. The workshop had two sections: presentations by invited experts, and country reports on recent development in feedstock preparation and quality in the three participating countries. Separate abstracts have been prepared for four of the six papers presented

  17. The 2008 ICOH Workshop on Skin Notation

    Sartorelli, P; Ahlers, H W; Cherrie, J W

    2010-01-01

    BACKGROUND: On 29 March 2008 the International Commission on Occupational Health (ICOH) Scientific Committee on Occupational and Environmental Dermatoses organized a Skin Notation Workshop hosted by the 11th International Percutaneous Penetration Perspectives Conference (La Grande Motte, France...... assignment criteria and the attempts to improve the S system made by various international and governmental agencies. A position paper was subsequently published. OBJECTIVES: The workshop in France was a continuation of this activity with the aim of evaluating how the different strategies can improve S....... METHODS AND DISCUSSION: The Workshop was divided into two sessions. The first was dedicated to lectures focused on different aspects of S. In the second session participants discussed key issues with the aim of exploring the actions needed to improve international S. systems....

  18. Diversity in Action | Interactive Workshop | 4 July

    2013-01-01

    Come and take part in an interactive workshop organised by the CERN Diversity Programme designed to creatively explore the meaning of diversity and share your experience of working with differences at CERN.   Thursday 4 July 2013 – 1.30 p.m. - 5.30 p.m. Pump Hall - Building 216-R-401 "Diversity in Action" is an interactive half-day workshop designed to creatively explore the meaning and importance of diversity at CERN, in support of the Organization’s value of “appreciating differences, fostering equality and promoting collaboration”. Using participative multi-media methods, this innovative workshop will provide participants with insights into diversity, help them to develop greater sensitivity to differences, explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. Alan Richter, Ph. D., is the president of QED Consulting, a 25-year-old company based in New York. He has consulted to org...

  19. Proceedings: 2001 Nuclear Asset Management Workshop

    2002-01-01

    The fourth annual EPRI Nuclear Asset Management Workshop helped decision makers at all levels of nuclear enterprises to keep informed about developing nuclear asset management (NAM) processes, methods, and tools. The goal is to operate nuclear plants with enhanced profitability, while maintaining safety

  20. Summary of classical general relativity workshop

    In the classical general relativity workshop, ten lectures were presented on various topics. The topics included aspects of black-hole physics, gravitational collapse and the formation of black holes, specific stellar models like a superdense star, method of extracting solutions by exploiting Noether symmetry, brane world and.

  1. Summary of cosmology workshop

    in quality, quantity, and the scope of cosmological observations. While the ob- ... In this article, I summarize both the oral and poster presentations made at the workshop. ... the angular spectrum of CMB anisotropy with recent measurements of the power spectrum of ..... A thermodynamical treatment within the framework of.

  2. Radiation Source Replacement Workshop

    Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

    2010-12-01

    This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

  3. Dynamic defense workshop :

    Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

    2013-02-01

    On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

  4. Flywheel energy storage workshop

    O`Kain, D.; Carmack, J. [comps.

    1995-12-31

    Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

  5. WORKSHOP: Scintillating fibre detectors

    Anon.

    1989-01-01

    Scintillating fibre detector development and technology for the proposed US Superconducting Supercollider, SSC, was the subject of a recent workshop at Fermilab, with participation from the high energy physics community and from industry. Sessions covered the current status of fibre technology and fibre detectors, new detector applications, fluorescent materials and scintillation compositions, radiation damage effects, amplification and imaging structures, and scintillation fibre fabrication techniques

  6. WORKSHOP: Nuclear physics

    Sheepard, Jim; Van Dyck, Olin

    1985-06-15

    A workshop 'Dirac Approaches t o Nuclear Physics' was held at Los Alamos from 31 January to 2 February, the first meeting ever on relativistic models of nuclear phenomena. The objective was to cover historical background as well as the most recent developments in the field, and communication between theorists and experimentalists was given a high priority.

  7. General conclusions on workshop

    Rustand, H.

    2006-01-01

    The author proposes a general conclusion on the second workshop on the indemnification of damage in the event of a nuclear accident, organized in Bratislava, the 18-20 May 2005. He pointed out the most important discussions and the results revealed during these two days. (A.L.B.)

  8. WORKSHOP: Scintillating crystals

    Anon.

    1992-12-15

    Scintillating crystals are one of the big spinoff success stories of particle physics, and from 22-26 September an international workshop in Chamonix in the French Alps looked at the increasing role of these materials in pure and applied science and in industry.

  9. ATLAS TRT 2002 Workshop

    Capeans, M.

    Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

  10. WORKSHOP: Scintillating crystals

    Anon.

    1992-01-01

    Scintillating crystals are one of the big spinoff success stories of particle physics, and from 22-26 September an international workshop in Chamonix in the French Alps looked at the increasing role of these materials in pure and applied science and in industry

  11. LINEAR COLLIDERS: 1992 workshop

    Settles, Ron; Coignet, Guy

    1992-01-01

    As work on designs for future electron-positron linear colliders pushes ahead at major Laboratories throughout the world in a major international collaboration framework, the LC92 workshop held in Garmisch Partenkirchen this summer, attended by 200 machine and particle physicists, provided a timely focus

  12. Conferences, workshops, trainings

    Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management . Mar 1 Wed 8:00 AM Cosmic Rays, Pulsar Nebulae and Dark Matter La Fonda Hotel, Santa Fe, NM The purpose Quantum Matter La Fonda Hotel - 100 East San Francisco Street, Santa Fe, NM The purpose of this workshop

  13. YOUR house - workshop

    2013-01-01

    Exhibition shows the result of a three-week workshop for 3.year students from the Architecture school in which I wanted to test the idea that good architecture is a balanced work between the non-reflective life experience of space and materiality (all the things you know and feel subconsciously a...

  14. OpenShift Workshop

    CERN. Geneva; Rodriguez Peon, Alberto

    2017-01-01

    Workshop to introduce developers to the OpenShift platform available at CERN. Several use cases will be shown, including deploying an existing application into OpenShift. We expect attendees to realize about OpenShift features and general architecture of the service.

  15. DNA Microarray Workshop

    Lauro, Bernie

    1999-01-01

    .... Funding for the workshop was provided by the US Department of Defense (USAMRAA). The aim of the meeting was to discuss how to best use the data derived from the Malaria Genome Sequencing Project for the functional analysis of the genome...

  16. FINPIE/97. Workshop proceedings

    NONE

    1997-12-31

    This publication contains the proceedings of 1997 Finnish Workshop on Power and Industrial Electronics, held in Espoo, Finland, on 26 August, 1997. The programme consisted of technical sessions on Advanced AC Motor Control, Electric Machines and Drives, Advanced Control and Measurement, Power Electronics Systems, Modelling and Simulation, and Power Converters

  17. 8. stellarator workshop

    1991-07-01

    The technical reports in this collection of papers were presented at the 8th International Workshop on Stellarators, and International Atomic Energy Agency Technical Committee Meeting. They include presentations on transport, magnetic configurations, fluctuations, equilibrium, stability, edge plasma and wall aspects, heating, diagnostics, new concepts and reactor studies. Refs, figs and tabs

  18. Diversity in Action workshop | 18 September | Business Centre Technoparc

    2015-01-01

    After two years, five successful editions and plenty of positive feedback, we are happy to announce the sixth edition of our Diversity in Action workshop.   Seize the opportunity and participate in this half-day interactive workshop designed to explore the meaning and importance of diversity at CERN. Using participative multimedia methods, this workshop will provide participants with insights into the different dimensions of diversity, help to develop greater sensitivity to differences, and explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. “For me it was a great opportunity to talk about diversity issues with other people at CERN who I would never have met otherwise,” says Alex Brown, who participated in the third edition of the workshop. “The discussions I was involved in inspired connections that are still active.” Diversity in Action workshop – sixth...

  19. Workshops as a Research Methodology

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    , and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  20. UVI Cyber-security Workshop Workshop Analysis.

    Kuykendall, Tommie G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Allsop, Jacob Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Anderson, Benjamin Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Boumedine, Marc [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carter, Cedric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Galvin, Seanmichael Yurko [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Oscar [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lee, Wellington K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lin, Han Wei [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Morris, Tyler Jake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nauer, Kevin S.; Potts, Beth A.; Ta, Kim Thanh; Trasti, Jennifer; White, David R.

    2015-07-08

    The cybersecurity consortium, which was established by DOE/NNSA’s Minority Serving Institutions Partnerships Program (MSIPP), allows students from any of the partner schools (13 HBCUs, two national laboratories, and a public school district) to have all consortia options available to them, to create career paths and to open doors to DOE sites and facilities to student members of the consortium. As a part of this year consortium activities, Sandia National Laboratories and the University of Virgin Islands conducted a week long cyber workshop that consisted of three courses; Digital Forensics and Malware Analysis, Python Programming, and ThunderBird Cup. These courses are designed to enhance cyber defense skills and promote learning within STEM related fields.

  1. Physics and Astronomy New Faculty Workshops: 20 Years of Workshops and 2000 Faculty

    Hilborn, Robert

    Most college and university new faculty members start their teaching careers with almost no formal training in pedagogy. To address this issue, the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society have been offering since 1996 workshops for physics and astronomy new faculty members (and in recent years for experienced faculty members as well). The workshops introduce faculty members to a variety of interactive engagement teaching (IET) methods and the evidence for their effectiveness, embedded in a framework of general professional development. Currently the workshops engage about 50% of the new tenure-track hires in physics and astronomy. The workshops are quite successful in making the participants aware of IET methods and motivating them to implement them in their classes. However, about 1/3 of the participants stop using IET methods within a year or two. The faculty members cite (a) lack of time and energy to change, (b) content coverage concerns, and (c) difficulty getting students engaged as reasons for their discontinuance. To help overcome these barriers, we have introduced faculty online learning communities (FOLCs). The FOLCs provide peer support and advice through webinars and coaching from more experienced faculty members. Recommendations based on the workshops and the experiences of the participants can enhance the teaching effectiveness of future physics and astronomy faculty members. This work was supported in part by NSF Grant 1431638.

  2. Lighting Assessment in Knitting Workshop in Yazd

    A Barkhordari

    2016-01-01

    Full Text Available Introduction: The sense of sight is one of the most vital human senses and help the environment gets most of its information. Whatever one's job is more subtle, more work will be given brightness. Good lighting, increase work efficiency and general physiological effects on people's moods. The relationship between low and high frequency illumination accidents there Methods: This study was conducted in 10 workshops in Yazd home knitting. Due to maximize natural lighting measurements in June and November this year took place in cloudy days. Thus, in both seasons overall lighting, natural and artificial, were evaluated. That, in order to measure all the natural light, artificial light sources (lamps and the measurements were off by clarifying re-lamp, the overall lighting (natural and artificial were measured. In order to measure the general lighting provided by the Illuminating Engineering society and stop the pattern surfaces were used. The workshops with less than standard lighting conditions were identified and interventions to improve the brightness of the workshops were measured again. Results: Average, minimum and maximum overall brightness of spring workshops 4 and 6 respectively, with values of 67/278 and 53/452 is a luxury. Workshops values 5 and 2 47/184 and 43/218 minimum and maximum luxury in order to be daylight in spring. Conclusions: The majority of the studied weaving Workshops lighting was good, with measures such as proper installation and periodic cleaning and dust lamps, replacement lamps burned by use of fluorescent ambient lighting conditions can be improved.

  3. EML indoor radon workshop, 1982

    George, A.C.; Lowder, W.; Fisenne, I.; Knutson, E.O.; Hinchliffe, L.

    1983-07-01

    A workshop on indoor radon, held at the Environmental Measurements Laboratory (EML) on November 30 and December 1, 1982, covered recent developments in radon daughter research and development. Thirty papers were presented dealing with standardization and quality assurance measurement methods, surveys, measurements strategy, physical mechanisms of radon and radon daughter transport and development of guidance standards for indoor exposures. The workshop concluded with a planning session that identified the following needs: (1) national and international intercomparisons of techniques for measuring radon and radon daughter concentrations, working level and radon exhalation flux density; (2) development and refinement of practical measurement techniques for thoron and its daughter products; (3) quantitative definition of the sources of indoor radon and the mechanisms of transport into structures; (4) better knowledge of the physical properties of radon daughters; (5) more complete and accurate data on the population exposure to radon, which can only be met by broadly based surveys; and (6) more international cooperation and information exchange among countries with major research programs

  4. 14th International Probabilistic Workshop

    Taerwe, Luc; Proske, Dirk

    2017-01-01

    This book presents the proceedings of the 14th International Probabilistic Workshop that was held in Ghent, Belgium in December 2016. Probabilistic methods are currently of crucial importance for research and developments in the field of engineering, which face challenges presented by new materials and technologies and rapidly changing societal needs and values. Contemporary needs related to, for example, performance-based design, service-life design, life-cycle analysis, product optimization, assessment of existing structures and structural robustness give rise to new developments as well as accurate and practically applicable probabilistic and statistical engineering methods to support these developments. These proceedings are a valuable resource for anyone interested in contemporary developments in the field of probabilistic engineering applications.

  5. GammaWorkshops Proceedings

    Ramebaeck, H.; Straelberg, E.; Klemola, S.; Nielsen, Sven P.; Palsson, S.E.

    2012-01-01

    Due to a sparse interaction during the last years between practioners in gamma ray spectrometry in the Nordic countries, a NKS activity was started in 2009. This GammaSem was focused on seminars relevant to gamma spectrometry. A follow up seminar was held in 2010. As an outcome of these activities it was suggested that the 2011 meeting should be focused on practical issues, e.g. different corrections needed in gamma spectrometric measurements. This three day's meeting, GammaWorkshops, was held in September at Risoe-DTU. Experts on different topics relevant for gamma spectrometric measurements were invited to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical sessions. The practical sessions included demonstrations of tools for e.g. corrections and calculations of the above meantioned topics. (Author)

  6. Spiral 2 workshop

    NONE

    2004-07-01

    The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop.

  7. PREFACE: Collapse Calderas Workshop

    Gottsmann, Jo; Aguirre-Diaz, Gerardo

    2008-10-01

    Caldera-formation is one of the most awe-inspiring and powerful displays of nature's force. Resultant deposits may cover vast areas and significantly alter the immediate topography. Post-collapse activity may include resurgence, unrest, intra-caldera volcanism and potentially the start of a new magmatic cycle, perhaps eventually leading to renewed collapse. Since volcanoes and their eruptions are the surface manifestation of magmatic processes, calderas provide key insights into the generation and evolution of large-volume silicic magma bodies in the Earth's crust. Despite their potentially ferocious nature, calderas play a crucial role in modern society's life. Collapse calderas host essential economic deposits and supply power for many via the exploitation of geothermal reservoirs, and thus receive considerable scientific, economic and industrial attention. Calderas also attract millions of visitors world-wide with their spectacular scenic displays. To build on the outcomes of the 2005 calderas workshop in Tenerife (Spain) and to assess the most recent advances on caldera research, a follow-up meeting was proposed to be held in Mexico in 2008. This abstract volume presents contributions to the 2nd Calderas Workshop held at Hotel Misión La Muralla, Querétaro, Mexico, 19-25 October 2008. The title of the workshop `Reconstructing the evolution of collapse calderas: Magma storage, mobilisation and eruption' set the theme for five days of presentations and discussions, both at the venue as well as during visits to the surrounding calderas of Amealco, Amazcala and Huichapan. The multi-disciplinary workshop was attended by more than 40 scientist from North, Central and South America, Europe, Australia and Asia. Contributions covered five thematic topics: geology, geochemistry/petrology, structural analysis/modelling, geophysics, and hazards. The workshop was generously supported by the International Association of Volcanology and the Chemistry of The Earth's Interior

  8. Accelerator reliability workshop

    Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

    2002-07-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

  9. Imaging Sciences Workshop Proceedings

    Candy, J.V.

    1996-11-21

    This report contains the proceedings of the Imaging Sciences Workshop sponsored by C.A.S.LS., the Center for Advanced Signal & Image Sciences. The Center, established primarily to provide a forum where researchers can freely exchange ideas on the signal and image sciences in a comfortable intellectual environment, has grown over the last two years with the opening of a Reference Library (located in Building 272). The Technical Program for the 1996 Workshop include a variety of efforts in the Imaging Sciences including applications in the Microwave Imaging, highlighted by the Micro-Impulse Radar (MIR) system invented at LLNL, as well as other applications in this area. Special sessions organized by various individuals in Speech, Acoustic Ocean Imaging, Radar Ocean Imaging, Ultrasonic Imaging, and Optical Imaging discuss various applica- tions of real world problems. For the more theoretical, sessions on Imaging Algorithms and Computed Tomography were organized as well as for the more pragmatic featuring a session on Imaging Systems.

  10. Accelerator reliability workshop

    Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

    2002-01-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

  11. Spiral 2 workshop

    2004-01-01

    The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop

  12. ARCSACC '99: Workshop Proceedings

    Nahir, M.; Biggar, K.

    1999-01-01

    The assessment and remediation of contaminated sites in cold and Arctic environments is an area of increasing concern, primarily because of the unique problems associated with northern regions. Not only the obvious effects of the cold temperatures on the operation of many systems, but also remedial effectiveness of measures under extreme cold conditions are of interest. Accordingly, this workshop was organized to provide a means of exchange of information among people responsible for cleaning-up contaminated sites in cold and Arctic environments, researchers, and providers of remediation services with experience in dealing with such conditions. Speakers at the workshop addressed problems concerning risk assessment and site characterization, contaminant migration in permafrost, contamination caused by mining and associated clean-up problems, assessed bioremediation as a means of contaminant control, reviewed various remediation technologies and techniques, and presented a number of bioremediation case studies. refs., tabs., figs

  13. MATHEON Workshop 2013

    Calderbank, Robert; Kutyniok, Gitta; Vybíral, Jan

    2015-01-01

    Since publication of the initial papers in 2006, compressed sensing has captured the imagination of the international signal processing community, and the mathematical foundations are nowadays quite well understood. Parallel to the progress in mathematics, the potential applications of compressed sensing have been explored by many international groups of, in particular, engineers and applied mathematicians, achieving very promising advances in various areas such as communication theory, imaging sciences, optics, radar technology, sensor networks, or tomography. Since many applications have reached a mature state, the research center MATHEON in Berlin focusing on "Mathematics for Key Technologies", invited leading researchers on applications of compressed sensing from mathematics, computer science, and engineering to the "MATHEON Workshop 2013: Compressed Sensing and its Applications” in December 2013. It was the first workshop specifically focusing on the applications of compressed sensing. This book featur...

  14. Workshop on decommissioning

    Broden, K.

    2005-12-01

    A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

  15. RADIOFREQUENCY SUPERCONDUCTIVITY: Workshop

    Lengeler, Herbert

    1989-01-01

    Superconducting radiofrequency is already playing an important role in the beam acceleration system for the TRISTAN electron-positron collider at the Japanese KEK Laboratory and new such systems are being prepared for other major machines. Thus the fourth Workshop on Radiofrequency Superconductivity, organized by KEK under the chairmanship of local specialist Yuzo Kojima and held just before the International Conference on High Energy Accelerators, had much progress to review and even more to look forward to

  16. Workshop UNK-600 (proceedings)

    Zajtsev, A.M.; Bitykov, S.I.

    1994-01-01

    Proceedings are presented of the workshop devoted to the accelerating storage complex of IHEP (UNK-600). In the first section is given the information on the present status of the UNK-600 and particle channels design and on the adopted experiment NEPTUN-A. In the papers of the second section are discussed hadron physics investigations at 600 GeV. Experiments in the neutrino and muon beams are analyzed. A possible program of studying the charged kaon rare decays is described

  17. Experimental halls workshop summary

    Thorndike, A.

    1976-01-01

    At the experimental halls workshop, discussions were held on: (1) open areas as compared with enclosed halls; (2) the needs of ep, anti pp, and other options; (3) the hall for the lepton detector; and (4) the hall for the hadron spectrometer. The value of different possibilities for the future experimental program was explored. A number of suggestions emerged which will be used as the design of the experimental halls progresses

  18. WORKSHOP: Let's twist again..

    Villalobos Baillie, Orlando

    1988-12-15

    In the quantum chromodynamics (QCD) candidate theory of interquark forces, calculations involve summing the effects from many different possible quark/gluon interactions. In addition to the 'leading term' frequently used as the basis for QCD calculations, additional contributions — so-called 'higher twists' — are modulated by powers of kinematical factors. An illuminating international workshop to discuss higher twist QCD was held at the College de France, Paris, from 21-23 September.

  19. DESY Theory Workshop

    Anon.

    1985-01-01

    Held during the 'Festwoche' which marked the 25th anniversary of the German DESY Laboratory last year, the traditional DESY Theory Workshop concentrated on weak interactions of heavy quarks and on non-standard models for weak interactions, together with a progress report on lattice gauge theories with fermions. The organizing committee had invited eleven lecturers to present experiments and theoretical ideas in these fields. Also many short communications contributed interesting material

  20. Imaging sciences workshop

    Candy, J.V.

    1994-11-15

    This workshop on the Imaging Sciences sponsored by Lawrence Livermore National Laboratory contains short abstracts/articles submitted by speakers. The topic areas covered include the following: Astronomical Imaging; biomedical imaging; vision/image display; imaging hardware; imaging software; Acoustic/oceanic imaging; microwave/acoustic imaging; computed tomography; physical imaging; imaging algorithms. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  1. International Social Pharmacy Workshop

    Cordina, Maria; Journal of the Malta College of Pharmacy Practice Editorial Board

    2003-01-01

    The Malta College of Pharmacy Practice, will be hosting the 13th International Social Pharmacy Workshop next summer. The concept of social pharmacy is very clearly explained in the article by Professor Ellen West Sørensen and colleagues, who are considered to be pioneers in this field. Malta has successfully hosted a number of pharmacy conferences, however this one is somewhat different and rather special.

  2. WORKSHOP: Radiofrequency superconductivity

    Anon.

    1984-10-15

    The Second Workshop on Radiofrequency Superconductivity was held at CERN from 23-27 July, four years after the first, organized at Karlsruhe. 35 invited talks were presented to the about 80 participants from Australia, Brazil, Europe, Japan and the United States. For the first time, ten Laboratories operating or planning superconducting accelerators for heavy ions participated and shared their experience with the community proposing the use of superconducting accelerating sections for electron accelerators.

  3. WORKSHOP: Radiofrequency superconductivity

    Anon.

    1984-01-01

    The Second Workshop on Radiofrequency Superconductivity was held at CERN from 23-27 July, four years after the first, organized at Karlsruhe. 35 invited talks were presented to the about 80 participants from Australia, Brazil, Europe, Japan and the United States. For the first time, ten Laboratories operating or planning superconducting accelerators for heavy ions participated and shared their experience with the community proposing the use of superconducting accelerating sections for electron accelerators

  4. The Astronomy Workshop

    Hamilton, D. P.

    2005-05-01

    The Astronomy Workshop (http://janus.astro.umd.edu) is a collection of interactive online educational tools developed for use by students, educators, and the general public. The more than 20 tools in the Astronomy Workshop are rated for ease-of-use, and have been extensively tested in large university survey courses, classes for undergraduate majors, and High Schools. Here we briefly describe a few of the more popular tools. The Life of the Sun (New!): The history of the Sun is animated as a movie, showing students how the size and color of our star has evolved and will evolve in time. Animated Orbits of Planets and Moons: The orbital motions of planets, moons, asteroids, and comets are animated at their correct relative speeds in accurate to-scale drawings. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country of impact (if Earth is the target), energy of explosion, crater size, and magnitude of the ``planetquake'' generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Astronomical Distances: Travel away from the Earth at a chosen speed and see how long it takes to reach other planets, stars and galaxies. This tool helps students visualize astronomical distances in an intuitive way. Funding for the Astronomy Workshop is provided by a NASA EPO grant.

  5. Grid and Entrepreneurship Workshop

    2006-01-01

    The CERN openlab is organising a special workshop about Grid opportunities for entrepreneurship. This one-day event will provide an overview of what is involved in spin-off technology, with a special reference to the context of computing and data Grids. Lectures by experienced entrepreneurs will introduce the key concepts of entrepreneurship and review, in particular, the industrial potential of EGEE (the EU co-funded Enabling Grids for E-sciencE project, led by CERN). Case studies will be given by CEOs of European start-ups already active in the Grid and computing cluster area, and regional experts will provide an overview of efforts in several European regions to stimulate entrepreneurship. This workshop is designed to encourage students and researchers involved or interested in Grid technology to consider the entrepreneurial opportunities that this technology may create in the coming years. This workshop is organized as part of the CERN openlab student programme, which is co-sponsored by CERN, HP, ...

  6. Summary of the Workshop

    Myers, S; Zimmermann, F

    2012-01-01

    The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

  7. Summary of the Workshop

    Myers, S; Zimmermann, F [European Organization for Nuclear Research, Geneva (Switzerland)

    2012-07-01

    The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

  8. The ROS Workshop

    Francis, D.

    The first week of February saw the taking place of the ReadOut Subsystem (ROS) workshop. The ROS is the subsystem of the Trigger, DAQ & DCS project which receives and buffers data from the detector ReadOut Drivers (RODs). On request it then provides a subset of this buffered data, the so-called Regions of Interest (RoI), to the Level 2 trigger. Using the subsequent Level 2 trigger decision, the ROS either removes the buffered event data from its buffers or sends the full event data to the Event Filter for further processing. The workshop took place over a four-day period at a location in the Jura. The average daily attendance was twenty people, which mainly represented the five main ATLAS institutes currently engaged in this Trigger, DAQ & DCS activity. The aim of the workshop was to bring to an end the current prototyping activities in this area and launch the next, final, phase of prototyping. This new phase of prototyping will build on the successful activities of the previous phase and will focus...

  9. Collaborative Design Workshops: Evolution of a Workshop Method

    Quanjel, E.M.C.J.; Otter, den A.F.H.J.; Zeiler, W.; Barrett, P.; Amaratunga, D.; Haigh, R.; Keraminiyage, K.; Pathirage, C.

    2010-01-01

    In the Dutch Building Industry sub optimal use of knowledge by participants during the design- and engineering phase causes building damage and hinders innovative designs and solutions. Therefore the attitude, the mindset of the different design participants has to change as well as that they have

  10. Second International Workshop on Teaching Analytics

    Vatrapu, Ravi; Reimann, Peter; Halb, Wolfgang

    2013-01-01

    Teaching Analytics is conceived as a subfield of learning analytics that focuses on the design, development, evaluation, and education of visual analytics methods and tools for teachers in primary, secondary, and tertiary educational settings. The Second International Workshop on Teaching Analytics...... (IWTA) 2013 seeks to bring together researchers and practitioners in the fields of education, learning sciences, learning analytics, and visual analytics to investigate the design, development, use, evaluation, and impact of visual analytical methods and tools for teachers’ dynamic diagnostic decision...

  11. 2014 Penn State Bioinorganic Workshop

    Golbeck, John [Pennsylvania State Univ., State College, PA (United States)

    2015-10-01

    The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.

  12. National Postirradiation Examination Workshop Report

    Schulthess, Jason L

    2011-06-01

    experimentation and analysis through robust modeling coupled with advanced characterization. 3. Advancing the infrastructure and accessibility of physical and administrative systems needed to meet the needs of participating organizations that are subject to different time cycles and constraints that make working and collaborating the national laboratories challenging. 4. Pursuing in-situ analysis and instrumentation to support the examination of dynamic changes to materials’ microstructure, deformation, and surface effects as they occur with time scales rather than the static comparison offered by current PIE methods. This Workshop Report responds to the research challenges for advanced/future PIE needs for nuclear materials development outlined by Energy Secretary Chu and the DOE-NE Research and Development Roadmap report, which was delivered to Congress in April 2010, (DOE-NE, 2010) by identifying the technial needs for fuel and material development specifically related to PIE. The information from the panels address these research challenges by identifying specific needs related to each of the topical areas. The focus of the Workshop was to identify gaps in the enabling capabilities for nuclear energy research and to identify high-priority fundamental capabilities to enable research to be completed that would likely have high impact on enabling nuclear energy as a significant contributor to energy production portfolios.

  13. Proceedings of the Eighteenth Annual Software Engineering Workshop

    1993-01-01

    The workshop provided a forum for software practitioners from around the world to exchange information on the measurement, use, and evaluation of software methods, models, and tools. This year, approximately 450 people attended the workshop, which consisted of six sessions on the following topics: the Software Engineering Laboratory, measurement, technology assessment, advanced concepts, process, and software engineering issues in NASA. Three presentations were given in each of the topic areas. The content of those presentations and the research papers detailing the work reported are included in these proceedings. The workshop concluded with a tutorial session on how to start an Experience Factory.

  14. Report of the Orientation Workshop

    Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

    2014-01-01

    This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

  15. Computational Diffusion MRI : MICCAI Workshop

    Grussu, Francesco; Ning, Lipeng; Tax, Chantal; Veraart, Jelle

    2018-01-01

    This volume presents the latest developments in the highly active and rapidly growing field of diffusion MRI. The reader will find numerous contributions covering a broad range of topics, from the mathematical foundations of the diffusion process and signal generation, to new computational methods and estimation techniques for the in-vivo recovery of microstructural and connectivity features, as well as frontline applications in neuroscience research and clinical practice. These proceedings contain the papers presented at the 2017 MICCAI Workshop on Computational Diffusion MRI (CDMRI’17) held in Québec, Canada on September 10, 2017, sharing new perspectives on the most recent research challenges for those currently working in the field, but also offering a valuable starting point for anyone interested in learning computational techniques in diffusion MRI. This book includes rigorous mathematical derivations, a large number of rich, full-colour visualisations and clinically relevant results. As such, it wil...

  16. North Region ROW tool implementation workshop.

    2010-08-02

    Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...

  17. 77 FR 12313 - Food Labeling Workshop; Public Workshop

    2012-02-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... District Office (DALDO), in collaboration with Oklahoma State University (OSU), Robert M. Kerr Food...

  18. 75 FR 29775 - Food Labeling Workshop; Public Workshop

    2010-05-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2010-N-0001] Food and Drug Administration Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of...: Institute of Food Science & Engineering, University of Arkansas, 2650 North Young Ave., Fayetteville, AR...

  19. Participatory Design of Websites with Web Design Workshops

    Alison Bersani

    2008-03-01

    Full Text Available At the University of Rochester's River Campus Libraries we have included users in technology development with great success. "Participatory design" entails collaboration among designers, developers, and users from the earliest stages of conception through to implementation of websites and other technology. Using participatory methods, a project to redesign the library website began with workshops to identify user needs and preferences. The results of these workshops led to the identification of key tasks for the main page. They also generated a hierarchy of tasks for sub-pages and rich information about how students and faculty members use current websites in their work. In our article, we explain our reasons for running participatory design workshops, describe our methods, review participants and recruitment, and summarize key findings. We also include information about our local implementation and general conclusions about the value of design workshops for website design and development.

  20. WORKSHOP: Crystalline beams

    Anon.

    1989-01-01

    Following pioneer work by specialists at the Soviet Novosibirsk Laboratory some ten years ago, interest developed in the possibility of 'freezing' ion beams in storage rings by pushing cooling (to smooth out beam behaviour) to its limits, the final goal being to lock the ions into a neat crystal pattern. After advances by groups working on laser cooled ions in traps, and with several cooling rings now in operation, a workshop on crystalline ion beams was organized recently by the GSI (Darmstadt) Laboratory and held at Wertheim in Germany

  1. Magnet failure workshop

    Marston, P G [Massachusetts Institute of Technology, Cambridge (U.S.A.); Desportes, H [C.E.N.-Saclay, 91 - Gif-sur-Yvette (France); Morpurgo, M [C.E.R.N., Geneva (Switzerland); Komarek, P [Kernforschungszentrum, Karlsruhe (Germany, FR); Van Hulst, K [University of Nijmegen (The Netherlands); Hackley, D [General Dynamics Convair, San Diego, CA (U.S.A.); Young, J L [Westinghouse Electric Corporation, East Pittsburgh, PE (U.S.A.); Kibbe, K [Oak Ridge National Laboratory (U.S.A.)

    1984-01-01

    The dictionary defines failure as nonperformance or an unacceptable want of success. (The definition implies that the results should have been avoided). In an emerging technology such as ours, the boundaries of expectations and ''unacceptable success'' are often ill defined. Failures are often touted as hugh successes (occasionally rightfully so) and exceptional technological achievement can become dismal failure (if expectations are too high). We all, however, have experienced problems of one sort or another and the basic purpose of the workshop was simply to communicate these so that new or future workers don't make the same mistakes.

  2. 15th Cluster workshop

    Laakso, Harri; Escoubet, C. Philippe; The Cluster Active Archive : Studying the Earth’s Space Plasma Environment

    2010-01-01

    Since the year 2000 the ESA Cluster mission has been investigating the small-scale structures and processes of the Earth's plasma environment, such as those involved in the interaction between the solar wind and the magnetospheric plasma, in global magnetotail dynamics, in cross-tail currents, and in the formation and dynamics of the neutral line and of plasmoids. This book contains presentations made at the 15th Cluster workshop held in March 2008. It also presents several articles about the Cluster Active Archive and its datasets, a few overview papers on the Cluster mission, and articles reporting on scientific findings on the solar wind, the magnetosheath, the magnetopause and the magnetotail.

  3. WORKSHOP: Thermal field theory

    Anon.

    1989-04-15

    The early history of the Universe is a crucial testing ground for theories of elementary particles. Speculative ideas about the constituents of matter and their interactions are reinforced if they are consistent with what we suppose happened near the beginning of time and discarded if they are not. The cosmological consequences of these theories are usually deduced using a general statistical approach called thermal field theory. Thus, 75 physicists from thirteen countries met in Cleveland, Ohio, last October for the first 'Workshop on Thermal Field Theories and their Applications'.

  4. High Field Workshop

    Anon.

    1984-12-15

    A Workshop was held in Frascati at the end of September under the title 'Generation of High Fields for Particle Acceleration to Very High Energies'. It was organized by the CERN Accelerator School, the European Committee for Future Accelerators (ECFA) and the Italian INFN and was a further stage in the exploratory moves towards new techniques of acceleration. Such techniques might become necessary to respond to the needs of high energy physics some decades from now when the application of conventional techniques will probably have reached their limits.

  5. Magnet failure workshop

    Marston, P.G.; Desportes, H.; Morpurgo, M.; Komarek, P.; Van Hulst, K.; Hackley, D.; Young, J.L.; Kibbe, K.

    1984-01-01

    The dictionary defines failure as nonperformance or an unacceptable want of success. (The definition implies that the results should have been avoided). In an emerging technology such as ours, the boundaries of expectations and ''unacceptable success'' are often ill defined. Failures are often touted as hugh successes (occasionally rightfully so) and exceptional technological achievement can become dismal failure (if expectations are too high). We all, however, have experienced problems of one sort or another and the basic purpose of the workshop was simply to communicate these so that new or future workers don't make the same mistakes

  6. SIMS applications workshop. Proceedings

    NONE

    1997-04-01

    The first ANSTO/AINSE SIMS Workshop drew together a mixture of Surface Analysis experts and Surface Analysis users with the concept that SIMS analysis has to be enfolded within the spectrum of surface analysis techniques and that the user should select the technique most applicable to the problem. With this concept in mind the program was structured as sessions on SIMS Facilities; Applications to Mineral Surfaces; Applications to Biological Systems, Applications to Surfaces as Semi- conductors, Catalysts and Surface Coatings; and Applications to Ceramics

  7. Workshop on Cancer Research

    Vermorken, A.; Durieux, L.

    1991-01-01

    On April, 22-24 April 1991, the Hungarian National Institute of Oncology and the Commission of the European Communities have organized a workshop on Cancer Research. The aim of the meeting was to provide the participants information on the ongoing research in Hungary and in Member States. The topic is of importance for Hungary and it was also considered that the meeting could contribute to identify subjects of possible collaboration between Hungarian and Member State laboratories in the case financial support would become available. Three papers about new therapies under development were presented proton therapy and Boron neutron capture therapy

  8. WORKSHOP: Low temperature devices

    Anon.

    1987-01-01

    With extraterrestrial neutrinos (whether from the sun or further afield) continuing to make science news, and with the search for the so far invisible 'dark matter' of the universe a continual preoccupation, physicists from different walks of life (solid state, low temperature, particles, astrophysics) gathered at a workshop on low temperature devices for the detection of neutrinos and dark matter, held from 12-13 March at Ringberg Castle on Lake Tegernsee in the Bavarian Alps, and organized by the Max Planck Institute for Physics and Astrophysics in Munich

  9. WORKSHOP: Low temperature devices

    Anon.

    1987-06-15

    With extraterrestrial neutrinos (whether from the sun or further afield) continuing to make science news, and with the search for the so far invisible 'dark matter' of the universe a continual preoccupation, physicists from different walks of life (solid state, low temperature, particles, astrophysics) gathered at a workshop on low temperature devices for the detection of neutrinos and dark matter, held from 12-13 March at Ringberg Castle on Lake Tegernsee in the Bavarian Alps, and organized by the Max Planck Institute for Physics and Astrophysics in Munich.

  10. WORKSHOPS: Hadron facilities

    Anon.

    1987-01-01

    'Hadron facilities' – high intensity (typically a hundred microamps), medium energy (30-60 GeV) machines producing intense secondary beams of pions, kaons, etc., are being widely touted as a profitable research avenue to supplement what is learned through the thrust for higher and higher energies. This interest was reflected at an International Workshop on Hadron Facility Technology, held in Santa Fe, New Mexico. As well as invited talks describing the various projects being pushed in the US, Europe and Japan, the meeting included working groups covering linacs, beam dynamics, hardware, radiofrequency, polarized beams and experimental facilities

  11. Experimental halls workshop summary

    Thorndike, A.

    1976-01-01

    On May 26 and 27, 1976, approximately 50 people met for an informal workshop on plans for experimental halls for ISABELLE. Plans as they exist in the May 1976 version of the ISABELLE proposal were presented. Discussions were held on the following four general topics by separate working groups: (1) pros and cons of open areas as compared with enclosed halls; (2) experimental hall needs of ep, anti pp, and other options; (3) hall for the lepton detector; and (4) hall for the hadron spectrometer. The planning for experimental halls at PEP, the hall for the lepton detector, the hadron spectrometer, and open areas are discussed

  12. Workshop ''Radiooncology and law''

    Sack, H.; Deutsch, E.; Sauerwein, W.

    1998-01-01

    From 25 to 27 Sept 1997, a workshop was organized at the Essen Medical School (Universitaetsklinikum Essen), at which radiooncologists and jurists from universities and courts as well as lawyers contributed their views on mutual problems. The following topics were discussed by papers and in round table meetings: 'Requirements on the patient's information', 'definition of therapeutic guidelines - limits of clinical research and standard treatments', 'treatment documentation', 'liability of the physician for treatment faults' and 'technical standard and preserve of quality'. The consensual guidelines to the topics 'patient's information', 'therapeutic guidelines' and 'liability' are presented here. (orig.) [de

  13. Purpose of the workshop

    Brunner, H.

    1998-01-01

    The main purpose of the Workshop is to share the experience on emergency data management and to review various conceptual, technical, organisational and operational aspects and problems. The problems posed by hardware and software, the interplay of software developers and users/operators and the positive and negative experiences both from development and operation of data management systems are discussed. Emergency data management systems and their demonstrations are divided into four classes of possible applications: video games, training and simulation systems, 'history writing' = post-event analysis and documentation systems, real-time operational systems. (author)

  14. FASTBUS software workshop

    1985-01-01

    FASTBUS is a standard for modular high-speed data acquisition, data-processing and control, development for use in high-energy physics experiments incorporating different types of computers and microprocessors. This Workshop brought together users from different laboratories for a review of current software activities, using the standard both in experiments and for test equipment. There are also papers on interfacing and the present state of systems being developed for use in future LEP experiments. Also included is a discussion on the proposed revision of FASTBUS Standard Routines. (orig.)

  15. EVALUATION OF BASIC COURSE WORKSHOP CONDUCTED IN A MEDICAL COLLEGE

    Manasee Panda; Krishna Kar; Kaushik Mishra

    2017-01-01

    BACKGROUND Faculty development is perhaps one of the foremost issues among the factors influencing the quality of medical education. It was planned to evaluate Basic course workshop (BCW) on Medical education Technologies (MET) conducted in the institution with following objectives 1. To assess the effectiveness of the B CW in MET conducted in the Medical College. 2. To study the changes in teaching practices and assessment methods of faculties after the workshop. MATERIALS ...

  16. Radiation safety in radioluminous paint workshop handling tritium activated paint

    Gaur, P.K.; Venkateswaran, T.V.

    1986-01-01

    This paper discusses the safety features related to a workshop when tritium activated luminous paint is handled by workmen. Salient features of the workshop and the methods employed for monitoring the radiation levels are briefly outlined and results are discussed. The importance of proper ventilation of the workplace and precautions to be taken in the storage of painted articles are highlighted. (author). 1 table, 3 figs

  17. Proceedings of the atmospheric tracers and tracer application workshop

    Barr, S.; Gedayloo, T.

    1979-12-01

    In addition to presentations by participating members a general discussion was held in order to summarize and outline the goals and objectives of the workshop. A number of new low level background tracers such as heavy methanes, perfluorocarbons, multiply labeled isotopes such as 13 C 18 O 2 , helium 3, in addition to sample collection techniques and analytical methods for various tracers were discussed. This report is a summary of discussions and papers presented at this workshop

  18. Exploring Programmatic Interoperability: Army Future Force Workshop

    Smith , II., James D; Meyers, B. C

    2005-01-01

    .... It describes the background and motivation for the workshop, provides a brief overview of the workshop activities, and highlights the key observations and conclusions obtained through the course...

  19. Hydrogen Technology Education Workshop Proceedings

    None

    2002-12-01

    This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new education effort coordinated by the Hydrogen, Fuel Cells, & Infrastructure Technologies Program of the Office of Energy Efficiency and Renewable Energy.

  20. A Portable Computer Security Workshop

    Wagner, Paul J.; Phillips, Andrew T.

    2006-01-01

    We have developed a computer security workshop designed to instruct post-secondary instructors who want to start a course or laboratory exercise sequence in computer security. This workshop has also been used to provide computer security education to IT professionals and students. It is effective in communicating basic computer security principles…

  1. IFPA meeting 2008 workshops report

    Lash, G.E.; Ansari, T.; Bischof, P.

    2009-01-01

    Workshops are an important part of the IFPA annual meeting. At the IFPA meeting 2008 diverse topics were discussed in 12 themed workshops. Topics covered included: immunology of placentation; galectins and trophoblast invasion; signaling in implantation and invasion; markers to identify trophoblast...

  2. IFPA meeting 2009 workshops report

    Lash, G.E.; Burton, G.J.; Chamley, L.W.

    2010-01-01

    Workshops are an important part of the annual meeting of the International Federation of Placenta Associations (IFPA). At IFPA Meeting 2009 diverse topics were discussed in twelve themed workshops. Topics covered included: immune response to pregnancy; signaling between fetus and placenta...

  3. Workshop Polli Talu Loomingulises Keskuses

    2004-01-01

    MAP Intermedia Performance Collaboration'i (USA) workshop. Brendan McCall (liikumine), N. B. Aldrich (heli) ja Zach Poff (video) workshop tutvustab kolme kunstniku koostööd. Näidatakse ka multimeedia etendust, mis on külaliskunstnikel valminud Polli talus

  4. A Workshop in Transcultural Nursing.

    Stevenson, Thomas B.

    1986-01-01

    Describes an experimental, week-long interdisciplinary (i.e., nursing and anthropology) workshop on the relationship between health and culture conducted by Ohio University, Zanesville, in conjunction with the University of Toronto. Discusses program formulation, objectives, results, and suggestions for future workshops. (LAL)

  5. Special workshop on lung dosimetry

    Fisher, D.R.

    1983-01-01

    A Special Workshop on Lung Dosimetry was convened in Salt Lake City, Utah, on April 21-22, 1982, to stimulate the use of improved radiation dosimetry and to formulate a stronger basis for dose-response relationships for inhaled radionuclides. The two-day workshop was held in conjunction with the 30th Annual Meeting of the Radiation Research Society. Publication is planned

  6. Secondary School Design: Workshop Crafts.

    Department of Education and Science, London (England).

    Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

  7. AAAI Workshop on Nonmonotonic Reasoning

    Etherington, David

    1985-01-01

    On October 17-19 1984 a workshop on non-monotonic reasoning was held at Mohonk Mountain House, outside New Paltz, New York. The workshop was organized by Raymond Reiter and Bonnie Webber, and was sponsored by the Association for the Advancement of Artificial Intelligence.

  8. Presentation Skills Workshops for Nurses.

    Kinn, S.; Kenyon, M.

    2002-01-01

    Workshops were held to prepare nurses (n=87) to present results of professional activities. One year after the course, 20 had made oral and 30 written presentations. The workshops increased their confidence and were considered practical, informal, and nonthreatening. (Contains 31 references.) (SK)

  9. Beta Cell Workshop 2013 Kyoto

    Heller, R Scott; Madsen, Ole D; Nielsen, Jens Høiriis

    2013-01-01

    The very modern Kyoto International Conference Center provided the site for the 8th workshop on Beta cells on April 23-26, 2013. The preceding workshops were held in Boston, USA (1991); Kyoto, Japan (1994); Helsingør, Denmark (1997); Helsinki, Finland (2003); El Perello, Spain (2006); Peebles...

  10. Summary of experimental insertions workshop

    Sandweiss, J.; Month, M.

    1976-01-01

    An ISABELLE workshop of the summer 1976 series, which was held at Brookhaven August 16--20, focused on the design and utilization of the experimental insertions. The goals of the workshop are outlined, and a few general remarks about the results are presented

  11. The math excellence workshop

    Lasser, Susan J.S.; Snelsire, Robert W.

    1992-01-01

    This paper describes the first two years of the Clemson University College of Engineering's Math Excellence Workshop, a program administered by Westinghouse Electric Corporation, Savannah River Site, and funded by the Department of Energy. The objective of the program is to prepare minority students for technical/scientific study, with the goal of increasing minority retention in the College of Engineering, Twenty-three African American students, all of whom had been accepted into the College of Engineering Fall 1990 freshman class, took part in the first year of the program. The contract paid for room, board, tuition, fees, books, and supplies for the students to live on campus and take a precalculus math course. In addition, the students attended a special honors workshop designed to prepare them to study technical material effectively. Twenty of the 23 students earned As or Bs in the precalculus class. All participants indicated that they felt confident of their ability to succeed academically at Clemson. At the end of the session, twenty of the students were still planning to major in engineering. The program was repeated the following summer with 24 students from the 1991 freshman class. Twelve of the students earned A's or B's in the precalculus class. (author)

  12. The Astronomy Workshop

    Hamilton, Douglas P.

    2012-05-01

    {\\bf The Astronomy Workshop} (http://janus.astro.umd.edu) is a collection of interactive online educational tools developed for use by students, educators, professional astronomers, and the general public. The more than 20 tools in the Astronomy workshop are rated for ease-of-use, and have been extensively tested in large university survey courses as well as more specialized classes for undergraduate majors and graduate students. Here we briefly describe a few of the available tools. {\\bf Solar Systems Visualizer}: The orbital motions of planets, moons, and asteroids in the Solar System as well as many of the planets in exoplanetary systems are animated at their correct relative speeds in accurate to-scale drawings. Zoom in from the chaotic outer satellite systems of the giant planets all the way to their innermost ring systems. {\\bf Solar System Calculators}: These tools calculate a user-defined mathematical expression simultaneously for all of the Solar System's planets (Planetary Calculator) or moons (Satellite Calculator). Key physical and orbital data are automatically accessed as needed. {\\bf Stellar Evolution}: The "Life of the Sun" tool animates the history of the Sun as a movie, showing students how the size and color of our star has evolved and will evolve over billions of years. In "Star Race," the user selects two stars of different masses and watches their evolution in a split-screeen format that emphasizes the great differences in stellar lifetimes and fates.

  13. Highlights of the Workshop

    Noor, Ahmed K.

    1997-01-01

    Economic stresses are forcing many industries to reduce cost and time-to-market, and to insert emerging technologies into their products. Engineers are asked to design faster, ever more complex systems. Hence, there is a need for novel design paradigms and effective design tools to reduce the design and development times. Several computational tools and facilities have been developed to support the design process. Some of these are described in subsequent presentations. The focus of the workshop is on the computational tools and facilities which have high potential for use in future design environment for aerospace systems. The outline for the introductory remarks is given. First, the characteristics and design drivers for future aerospace systems are outlined; second, simulation-based design environment, and some of its key modules are described; third, the vision for the next-generation design environment being planned by NASA, the UVA ACT Center and JPL is presented. The anticipated major benefits of the planned environment are listed; fourth, some of the government-supported programs related to simulation-based design are listed; and fifth, the objectives and format of the workshop are presented.

  14. GammaWorkshops Proceedings

    Ramebaeck, H. (ed.) (Swedish Defence Research Agency (Sweden)); Straalberg, E. (Institute for Energy Technology, Kjeller (Norway)); Klemola, S. (Radiation and Nuclear Safety Authority, STUK (Finland)); Nielsen, Sven P. (Technical Univ. of Denmark. Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)); Palsson, S.E. (Icelandic Radiation Safety Authority (Iceland))

    2012-01-15

    Due to a sparse interaction during the last years between practioners in gamma ray spectrometry in the Nordic countries, a NKS activity was started in 2009. This GammaSem was focused on seminars relevant to gamma spectrometry. A follow up seminar was held in 2010. As an outcome of these activities it was suggested that the 2011 meeting should be focused on practical issues, e.g. different corrections needed in gamma spectrometric measurements. This three day's meeting, GammaWorkshops, was held in September at Risoe-DTU. Experts on different topics relevant for gamma spectrometric measurements were invited to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical sessions. The practical sessions included demonstrations of tools for e.g. corrections and calculations of the above meantioned topics. (Author)

  15. The math excellence workshop

    Lasser, Susan J.S.; Snelsire, Robert W [College of Engineering, Clemson University, Clemson, SC (United States)

    1992-07-01

    This paper describes the first two years of the Clemson University College of Engineering's Math Excellence Workshop, a program administered by Westinghouse Electric Corporation, Savannah River Site, and funded by the Department of Energy. The objective of the program is to prepare minority students for technical/scientific study, with the goal of increasing minority retention in the College of Engineering, Twenty-three African American students, all of whom had been accepted into the College of Engineering Fall 1990 freshman class, took part in the first year of the program. The contract paid for room, board, tuition, fees, books, and supplies for the students to live on campus and take a precalculus math course. In addition, the students attended a special honors workshop designed to prepare them to study technical material effectively. Twenty of the 23 students earned As or Bs in the precalculus class. All participants indicated that they felt confident of their ability to succeed academically at Clemson. At the end of the session, twenty of the students were still planning to major in engineering. The program was repeated the following summer with 24 students from the 1991 freshman class. Twelve of the students earned A's or B's in the precalculus class. (author)

  16. World Workshop on Oral Medicine VI

    Villa, Alessandro; Wolff, Andy; Narayana, Nagamani

    2016-01-01

    OBJECTIVE: To perform a systematic review of the pathogenesis of medication-induced salivary gland dysfunction (MISGD). MATERIALS AND METHODS: Review of the identified papers was based on the standards regarding the methodology for systematic reviews set forth by the World Workshop on Oral Medicine...... of the studies considered only xerostomia. Thus, further human studies are necessary to improve our understanding of the association between MISGD and the underlying pathophysiology. This article is protected by copyright. All rights reserved....

  17. A table top exercise and workshop

    Lakey, J.R.A.

    1992-01-01

    Table top exercises are widely applied in training for emergency preparedness and have long been a feature of Courses on Planning for Nuclear Emergencies. Experience of a large number of table top exercises is used to provide a classification of the types of exercise indicating the application and the disadvantages. The use of workshops is considered to be complementary rather than an alternative to teaching methods available from table top exercises. (author)

  18. Workshop on PSA for New and Advanced Reactors

    2012-01-01

    This workshop was organized by the NEA Working Group on Risk Assessment (WGRISK). The key objective of the workshop was to share the current state-of-the art on the PSA (Probabilistic Safety Assessment) applied for new reactors and advanced reactors. Fifty experts from 13 countries and one international organization (IAEA) participated in the present workshop, and 35 technical papers were presented. The main topics of interest, discussed during the workshop, included the followings: regulatory aspects, risk-informed methods, technical aspects of the PSA for new and advanced reactors, hazards of PSA (internal and external), severe accident/source term/Level 2 PSA, and consequence analysis/Level 3 PSA. Among the technical aspects of the PSA, the assessment of the reliability of passive safety systems appears to be a recurrent issue

  19. 7th International Workshop on Advanced Optical Imaging and Metrology

    2014-01-01

    In continuation of the FRINGE Workshop Series this Proceeding contains all contributions presented at the 7. International Workshop on Advanced Optical Imaging and Metrology. The FRINGE Workshop Series is dedicated to the presentation, discussion and dissemination of recent results in Optical Imaging and Metrology. Topics of particular interest for the 7. Workshop are: - New methods and tools for the generation, acquisition, processing, and evaluation of data in Optical Imaging and Metrology (digital wavefront engineering, computational imaging, model-based reconstruction, compressed sensing, inverse problems solution) - Application-driven technologies in Optical Imaging and Metrology (high-resolution, adaptive, active, robust, reliable, flexible, in-line, real-time) - High-dynamic range solutions in Optical Imaging and Metrology (from macro to nano) - Hybrid technologies in Optical Imaging and Metrology (hybrid optics, sensor and data fusion, model-based solutions, multimodality) - New optical sensors, imagi...

  20. Review of the theory and applications of Monte Carlo methods. Proceedings of a seminar-workshop, Oak Ridge, Tennessee, April 21-23, 1980

    Trubey, D.K.; McGill, B.L.

    1980-08-01

    This report consists of 24 papers which were presented at the seminar on Theory and Application of Monte Carlo Methods, held in Oak Ridge on April 21-23, plus a summary of the three-man panel discussion which concluded the seminar and two papers which were not given orally. These papers constitute a current statement of the state of the art of the theory and application of Monte Carlo methods for radiation transport problems in shielding and reactor physics

  1. Review of the theory and applications of Monte Carlo methods. Proceedings of a seminar-workshop, Oak Ridge, Tennessee, April 21-23, 1980

    Trubey, D.K.; McGill, B.L. (eds.)

    1980-08-01

    This report consists of 24 papers which were presented at the seminar on Theory and Application of Monte Carlo Methods, held in Oak Ridge on April 21-23, plus a summary of the three-man panel discussion which concluded the seminar and two papers which were not given orally. These papers constitute a current statement of the state of the art of the theory and application of Monte Carlo methods for radiation transport problems in shielding and reactor physics.

  2. Workshop on Subcritical Neutron Production

    Walter Sadowski; Roald Sagdeev

    2006-01-01

    Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

  3. DESY: Theory Workshop 1994

    Anon.

    1995-01-01

    For 1994, the traditional annual DESY Theory Workshop was devoted to supersymmetry. This is a novel symmetry relating bosons (normally force-carrying particles) and fermions (which normally feel the forces). In supersymmetry, bosons could have fermion counterparts, and vice versa. Although this subject is still largely a theorist's playground, many of the particles and phenomena predicted by models of low energy supersymmetry now seem within reach of present and planned future accelerator experiments, and this was one of the main reasons for choosing a more speculative theme after more phenomenological orientations in recent DESY Theory Workshops. After the welcome by DESY Director General Bjorn Wiik, attention was immediately focused on experimental aspects. P. Steffen (DESY) presented the latest results from HERA. In the following talks, K. Honscheid (Ohio), S. Lammel (Fermilab) and S. Komamiya (CERN and Tokyo) reviewed the experimental situation at electron-proton, hadron and electron-positron colliders, respectively. They discussed the most recent limits for supersymmetric particles (still none in sight!), as well as precision experiments where deviations from the standard model might show up. The workshop was treated to a first rate introduction to the MSSM (''minimal supersymmetric standard model'') by F. Zwirner (CERN), who clearly explained the motivation for going supersymmetric and reviewed the basic structure of the MSSM, its particle content and couplings, as well as the soft breaking terms necessary to avoid immediate conflict with experiment. This was followed by a systematic discussion of the Higgs sector by H. Haber (Santa Cruz), where the first hints of new physics could appear. However, he also made clear that it may not be easy to distinguish standard and non-standard Higgs bosons. Symmetries beyond the standard model, and in particular supersymmetric grand unification were treated in detail by G. Ross (Oxford) and S

  4. CTBTO international cooperation workshop

    1999-01-01

    The International Cooperation Workshop took place in Vienna, Austria, on 16 and 17 November 1998, with the participation of 104 policy/decision makers, Research and Development managers and diplomatic representatives from 58 States Signatories to the Comprehensive Nuclear-Test Ban Treaty (CTBT). The Workshop attempted to develop Treaty stipulations to: promote cooperation to facilitate and participate in the fullest possible exchange relating to technologies used in the verification of the Treaty; enable member states to strengthen national implementation of verification measures, and to benefit from the application of such technologies for peaceful purposes. The potential benefits arising from the CTBT monitoring, analysis and data communication systems are multifaceted, and as yet unknown. This Workshop provided the opportunity to examine some of these possibilities. An overview of the CTBT verification regime on the general aspects of the four monitoring technologies (seismic, hydro-acoustic, infrasound and radionuclides), including some of the elements that are the subject of international cooperation, were presented and discussed. Questions were raised on the potential benefits that can be derived by participating in the CTBT regime and broad-based discussions took place. Several concrete proposals on ways and means to facilitate and promote cooperation among States Signatories were suggested. The main points discussed by the participants can be summarized as follows: the purpose of the CTBT Organization is to assist member states to monitor Treaty compliance; the CTBT can be a highly effective technological tool which can generate wide-ranging data, which can be used for peaceful purposes; there are differences in the levels of technology development in the member states that is why peaceful applications should be supported by the Prep Com for the benefit of all member states, whether developed or developing, training being a key element to optimize the CTBT

  5. Oversight and Influencing of Licensee Leadership and Management for Safety, Including Safety Culture - Regulatory Approaches and Methods. Proceedings of an NEA/IAEA Workshop, Chester, United Kingdom, 26-28 September 2011

    2012-01-01

    Both regulators and the nuclear industry recognise the need for licensees to develop a strong, positive safety culture to support successful and sustainable nuclear safety performance. A number of reports have been issued by the IAEA and the NEA on the role of the regulator in relation to oversight of safety culture (References 1 to 5). There has been less clarity on how this should be achieved - in particular, with regard to strategies and practical approaches for maintaining oversight of, and influencing, those facets of licensee leadership and management which have a profound influence on safety culture. In recognition of this, the CSNI Working Group on Human and Organisational Factors (WGHOF), together with the CNRA Working Group on Inspection Practices (WGIP) and the IAEA, organised a workshop in Chester, United Kingdom, in May 2007 to provide a forum for gathering and sharing international experience, including good practices and learning points. The results of the workshop are reported in Reference 6. Workshop participants agreed that, in view of the rapidly developing approaches in this area, it would be sensible to hold a further workshop ('Chester 2') in 3-5 years in order to discuss how regulatory approaches have moved on and to share lessons learned from their application. In 2010, the WGIP hosted a workshop which included regulatory approaches for the assessment of licensee safety culture as a discussion topic. The outputs of the workshop included a list of commendable practices for monitoring and evaluating licensee safety culture (Reference 7). The 'Chester 2' workshop took place in September 2011. This report sets out the findings of the workshop, organised by the UK Office for Nuclear Regulation (ONR) on behalf of the CSNI/WGHOF and the IAEA. The workshop was attended by over 40 representatives of nuclear regulatory bodies and licensees from 15 countries plus IAEA and NEA. The workshop featured keynote papers on learning from major events, and from

  6. The Third ATLAS ROD Workshop

    Poggioli, L.

    A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

  7. Advanced Insider Threat Mitigation Workshop Instructional Materials

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2009-02-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is an update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat. The postulated threat includes both abrupt and protracted theft scenarios. Presentation is envisioned to be through classroom instruction and discussion. Several practical and group exercises are included for demonstration and application of the analysis approach contained in the lecture/discussion sessions as applied to a hypothetical nuclear facility.

  8. Recombinational repair: workshop summary

    Howard-Flanders, P.

    1983-01-01

    Recombinational repair may or may not be synonymous with postreplication repair. Considerable progress has been made in the study of the relevant enzymes, particularly those from bacteria. In this workshop we focus on the recombination enzyme RecA protein. What structural changes take place in the protein and in DNA during repair. How does homologous pairing take place. How is ATP hydrolysis coupled to the stand exchange reaction and the formation of heteroduplx DNA. Turning to another enzyme needed for certain kinds of bacterial recombination, we will ask whether the purified recB protein and recC protein complement each other and are sufficient for exonuclease V activity. In higher cells, we would like to know whether sister exchanges, which occur in bacteria after uv irradiation, are also seen in animal cells

  9. Workshop on Teaching Thermodynamics

    1985-01-01

    It seemed appropriate to arrange a meeting of teachers of thermodynamics in the United Kingdom, a meeting held in the pleasant surroundings of Emmanuel College, Cambridge, in Sept~mber, 1984. This volume records the ideas put forward by authors, the discussion generated and an account of the action that discussion has initiated. Emphasis was placed on the Teaching of Thermodynamics to degree-level students in their first and second years. The meeting, a workshop for practitioners in which all were expected to take part, was remarkably well supported. This was notable in the representation of essentially every UK university and polytechnic engaged in teaching engineering thermodynamics and has led to a stimulating spread of ideas. By intention, the emphasis for attendance was put on teachers of engineering concerned with thermodynamics, both mechanical and chemical engineering disciplines. Attendance from others was encouraged but limited as follows: non-engineering acad­ emics, 10%, industrialists, 10%. The ...

  10. Workshop Econophys-2015

    Aoyama, Hideaki; Chakrabarti, Bikas; Chakraborti, Anirban; Deo, Nivedita; Raina, Dhruv; Vodenska, Irena

    2017-01-01

    This book presents the proceedings from ECONOPHYS-2015, an international workshop held in New Delhi, India, on the interrelated fields of “econophysics” and “sociophysics”, which have emerged from the application of statistical physics to economics and sociology. Leading researchers from varied communities, including economists, sociologists, financial analysts, mathematicians, physicists, statisticians, and others, report on their recent work, discuss topical issues, and review the relevant contemporary literature. A society can be described as a group of people who inhabit the same geographical or social territory and are mutually involved through their shared participation in different aspects of life. It is possible to observe and characterize average behaviors of members of a society, an example being voting behavior. Moreover, the dynamic nature of interaction within any economic sector comprising numerous cooperatively interacting agents has many features in common with the interacting systems ...

  11. Signal sciences workshop proceedings

    Candy, J.V.

    1997-05-01

    This meeting is aimed primarily at signal processing and controls. The technical program for the 1997 Workshop includes a variety of efforts in the Signal Sciences with applications in the Microtechnology Area a new program at LLNL and a future area of application for both Signal/Image Sciences. Special sessions organized by various individuals in Seismic and Optical Signal Processing as well as Micro-Impulse Radar Processing highlight the program, while the speakers at the Signal Processing Applications session discuss various applications of signal processing/control to real world problems. For the more theoretical, a session on Signal Processing Algorithms was organized as well as for the more pragmatic, featuring a session on Real-Time Signal Processing.

  12. Signal sciences workshop. Proceedings

    Candy, J.V.

    1997-01-01

    This meeting is aimed primarily at signal processing and controls. The technical program for the 1997 Workshop includes a variety of efforts in the Signal Sciences with applications in the Microtechnology Area a new program at LLNL and a future area of application for both Signal/Image Sciences. Special sessions organized by various individuals in Seismic and Optical Signal Processing as well as Micro-Impulse Radar Processing highlight the program, while the speakers at the Signal Processing Applications session discuss various applications of signal processing/control to real world problems. For the more theoretical, a session on Signal Processing Algorithms was organized as well as for the more pragmatic, featuring a session on Real-Time Signal Processing

  13. Workshop on Interface Phenomena

    Kreuzer, Hans

    1987-01-01

    This book contains the proceedings of the first Workshop on Interface Phenomena, organized jointly by the surface science groups at Dalhousie University and the University of Maine. It was our intention to concentrate on just three topics related to the kinetics of interface reactions which, in our opinion, were frequently obscured unnecessarily in the literature and whose fundamental nature warranted an extensive discussion to help clarify the issues, very much in the spirit of the Discussions of the Faraday Society. Each session (day) saw two principal speakers expounding the different views; the session chairmen were asked to summarize the ensuing discussions. To understand the complexity of interface reactions, paradigms must be formulated to provide a framework for the interpretation of experimen­ tal data and for the construction of theoretical models. Phenomenological approaches have been based on a small number of rate equations for the concentrations or mole numbers of the various species involved i...

  14. Nuclear physics workshop

    1988-01-01

    This Workshop in Nuclear Physics related to the TANDAR, took place in Buenos Aires in April from 23 to 26, 1987, with attendance of foreign scientists. There were presented four seminars and a lot of studies which deal with the following fields: Nuclear Physics at medium energies, Nuclear Structure, Nuclear Reactions, Nuclear Matter, Instrumentation and Methodology for Nuclear Spectroscopy, Classical Physics, Quantum Mechanics and Field Theory. It must be emphasized that the Electrostatic Accelerator TANDAR allows to work with heavy ions of high energy, that opens a new field of work in PIXE (particle induced X-ray emission). This powerful analytic technique makes it possiblethe analysis of nearly all the elements of the periodic table with the same accuracy. (M.E.L.) [es

  15. CEC/USDOE workshop on uncertainty analysis

    Elderkin, C.E.; Kelly, G.N.

    1990-07-01

    Any measured or assessed quantity contains uncertainty. The quantitative estimation of such uncertainty is becoming increasingly important, especially in assuring that safety requirements are met in design, regulation, and operation of nuclear installations. The CEC/USDOE Workshop on Uncertainty Analysis, held in Santa Fe, New Mexico, on November 13 through 16, 1989, was organized jointly by the Commission of European Communities (CEC's) Radiation Protection Research program, dealing with uncertainties throughout the field of consequence assessment, and DOE's Atmospheric Studies in Complex Terrain (ASCOT) program, concerned with the particular uncertainties in time and space variant transport and dispersion. The workshop brought together US and European scientists who have been developing or applying uncertainty analysis methodologies, conducted in a variety of contexts, often with incomplete knowledge of the work of others in this area. Thus, it was timely to exchange views and experience, identify limitations of approaches to uncertainty and possible improvements, and enhance the interface between developers and users of uncertainty analysis methods. Furthermore, the workshop considered the extent to which consistent, rigorous methods could be used in various applications within consequence assessment. 3 refs

  16. The Impact of the 5E Teaching Model on Changes in Neuroscience, Drug Addiction, and Research Methods Knowledge of Science Teachers Attending California's ARISE Professional Development Workshops

    Manzo, Rosa D.; Whent, Linda; Liets, Lauren; de la Torre, Adela; Gomez-Camacho, Rosa

    2016-01-01

    This study examined how science teachers' knowledge of research methods, neuroscience and drug addiction changed through their participation in a 5-day summer science institute. The data for this study evolved from a four-year NIH funded science education project called Addiction Research and Investigation for Science Educators (ARISE). Findings…

  17. 2015 Inverter Workshop | Photovoltaic Research | NREL

    Inverter Workshop 2015 Inverter Workshop Wednesday, February 25, 2015 Chair: Jack Flicker In about inverters. This workshop represented a follow-on to the inverter workshops that Sandia National conversations between module and inverter experts. Agenda For a detailed schedule of the day's events, access

  18. Summary of the PSI workshop

    NONE

    2003-03-01

    The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

  19. Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

    Kofroň, Jan; Tumova, Jana

    2017-01-01

    These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

  20. Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

    Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

    2013-01-01

    These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

  1. Development of an artisanal tanning method of the acoupa weakfish (Cynoscion acoupa skin and its transfer through a workshop to a community in the city of Bragança, PA, Brazil

    Bruno José Corecha Fernandes Eiras

    2015-04-01

    Full Text Available Bragança is one of the largest fishing centers in the state of Pará, northern Brazil. In the city, there are several environmental and socio-economic problems such as lack of waste management and contamination of water sources that supply to the city and the Caeté river estuary. The social and economic problems are mainly caused by social inequality, which usually occurs in communities where the population depends mainly on fishing. Fish waste forms a part of the waste disposed in the region. Fish skin represents a significant portion of this waste and may be used for manufacturing leather by the tanning process, thereby generating income for the community and reducing environmental impacts. The acoupa weakfish (Cynoscion acoupa has a high potential for tanning because of its large size and high yield of skin. The aim of this study was to develop a methodology for artisanal skin tanning of acoupa weakfish and the subsequent transfer of this methodology to a fishing community through a workshop. The methodology developed in the laboratory is more streamlined than traditional methods and is based on tanning methods cited in the literature and techniques applied in regional tanneries. To assess the quality of acoupa weakfish leather, resistance tests were performed, which proved its potential for manufacturing clothing and footwear. An economic analysis of the hypothetical production of leather based on the tanning methodology developed in this work revealed that the project is feasible and the effluents generated during the process are less harmful to the environment, compared to those generated by traditional tanning methods.

  2. Ecotoxicological test systems proceedings of a series of workshops

    Hammons, A.S. (ed.)

    1981-06-01

    A series of six workshops was conducted by the Environmental Sciences Division, Oak Ridge National Laboratory, to identify laboratory methods and data evaluation techniques for predicting the environmental effects of chemical substances. Methods were evaluated for their potential for standardization and for use in the ecological hazard and risk assessment processes under the Toxic Substances Control Act. The workshops addressed assessment and policy requirements of multispecies toxicology test procedures, mathematical models useful in hazard and risk assessments, and methods for measuring effects of chemicals on terrestrial and aquatic population interactions and ecosystem properties. The workshops were primarily used as a mechanism to gather information about research in progress. This information was part of the data base used to prepare a critical review of laboratory methods for ecological toxicology.

  3. Ecotoxicological test systems proceedings of a series of workshops

    Hammons, A.S.

    1981-06-01

    A series of six workshops was conducted by the Environmental Sciences Division, Oak Ridge National Laboratory, to identify laboratory methods and data evaluation techniques for predicting the environmental effects of chemical substances. Methods were evaluated for their potential for standardization and for use in the ecological hazard and risk assessment processes under the Toxic Substances Control Act. The workshops addressed assessment and policy requirements of multispecies toxicology test procedures, mathematical models useful in hazard and risk assessments, and methods for measuring effects of chemicals on terrestrial and aquatic population interactions and ecosystem properties. The workshops were primarily used as a mechanism to gather information about research in progress. This information was part of the data base used to prepare a critical review of laboratory methods for ecological toxicology

  4. Reports on the 2015 AAAI Workshop Program

    Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

    2015-01-01

    AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

  5. Reports on the AAAI 1999 Workshop Program

    Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

    2000-01-01

    The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

  6. 3rd GAMM/IFIP-Workshop on “Stochastic Optimization: Numerical Methods and Technical Applications” held at the Federal Armed Forces University Munich

    Kall, Peter

    1998-01-01

    Optimization problems arising in practice usually contain several random parameters. Hence, in order to obtain optimal solutions being robust with respect to random parameter variations, the mostly available statistical information about the random parameters should be considered already at the planning phase. The original problem with random parameters must be replaced by an appropriate deterministic substitute problem, and efficient numerical solution or approximation techniques have to be developed for those problems. This proceedings volume contains a selection of papers on modelling techniques, approximation methods, numerical solution procedures for stochastic optimization problems and applications to the reliability-based optimization of concrete technical or economic systems.

  7. Report of the second Human Genome Diversity workshop

    NONE

    1992-12-31

    The Second Human Genome Diversity Workshop was successfully held at Penn State University from October 29--31, 1992. The Workshop was essentially organized around 7 groups, each comprising approximately 10 participants, representing the sampling issues in different regions of the world. These groups worked independently, using a common format provided by the organizers; this was adjusted as needed by the individual groups. The Workshop began with a presentation of the mandate to the participants, and of the procedures to be followed during the workshop. Dr. Feldman presented a summary of the results from the First Workshop. He and the other organizers also presented brief comments giving their perspective on the objectives of the Second Workshop. Dr. Julia Bodmer discussed the study of European genetic diversity, especially in the context of the HLA experience there, and of plans to extend such studies in the coming years. She also discussed surveys of world HLA laboratories in regard to resources related to Human Genome Diversity. Dr. Mark Weiss discussed the relevance of nonhuman primate studies for understanding how demographic processes, such as mate exchange between local groups, affected the local dispersion of genetic variation. Primate population geneticists have some relevant experience in interpreting variation at this local level, in particular, with various DNA fingerprinting methods. This experience may be relevant to the Human Genome Diversity Project, in terms of practical and statistical issues.

  8. 4. The Feldenkrais Method in the Puppeteer’s Training from the Perspective of Nicolas Gousseff’s Handheld Puppets Workshops

    Ciofu Anca-Mihaela

    2018-03-01

    Full Text Available Although the Feldenkrais method is quite well-known and used in relation to dance, music, and acting, it is rather uncommon to associate it with animation theatre. The puppeteer’s art is a profession that requires motor skills and sustained physical effort, which demands that the animating actor has an extended consciousness of oneself and of the space. Therefore, the Feldenkrais method can be a useful instrument in the puppeteer’s education and training, as the placing of the body in a relaxed stance, one which helps in the management of pain and effort, facilitates the conscious and creative learning of animation techniques, with an emphasis on the coordination and fluidity of movement. These are learning principles of the art of animation that are successfully used by Nicolas Gousseff, an artist that was formed at ESNAM (École Supérieure Nationale des Arts de la Marionnette de la Charleville-Mézières, and who has specialized in handheld puppets and using the actor’s body as a performative space for this type of animation.

  9. Systematic Review Workshop (August 2013)

    The goal for this workshop is to receive scientific input regarding approaches for different steps within a systematic review, such as evaluating individual studies, synthesizing evidence within a particular discipline, etc.

  10. Workshop on Developing Safe Software

    Lawrence, J.D.

    1994-11-01

    The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

  11. Workshop on developing safe software

    Lawrence, J.D.

    1992-01-01

    The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

  12. Stanford Workshop on Surgical Simulation

    Salisbury, Kenneth

    2001-01-01

    .... The goal of this workshop was to bring together researchers and developers from around the world who focus on modeling and simulation of deformable materials for applications requiring real-time interaction...

  13. Workshop on Language Student Attrition

    Whelan, Bree

    2001-01-01

    Seventy individuals from Government agencies (military and civilian), academia, and contractor organizations attended all or parts of a Workshop on student Attrition held at the Defense Language Institute Foreign Language Center (DLIFLC...

  14. Baltic Nuclear workshop. Final report

    Wahlberg, L.G.

    2001-05-01

    Proceedings of the NKS/BOK-1.6 workshop on crisis communication 'Baltic Nuclear', held in Stockholm March 19 -20, 2001, with participants from the nuclear power plants and nuclear authorities in the Baltic Sea region. The main content of the workshop was founded on the principle of 'learning by doing'. The participants were therefore practically trained in how to handle a crisis from an information and communication point of view. Added to that there were three different lectures. (au)

  15. 6th International Microbeam Workshop

    Dr Kevin M. Prise

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

  16. Midwest Transmission Workshop II Summary

    Kevin Bryan

    2002-12-05

    OAK-B135 After introductions of all participants, Abby Arnold, RESOLVE, reviewed the purpose of the meeting and the agenda. The purpose of the workshop was to share the results of the Midwest Independent System Operator (MISO) scenario development for wind and other fuel sources and the corresponding implications for transmission throughout the MISO control area. The workshop agenda is included in Attachment A.

  17. Cyber Mutual Assistance Workshop Report

    2018-02-01

    Threat Intelligence 19 2.13 Industry Forums and Groups 20 2.14 Cybersecurity Vendors 20 3 Conclusions and Recommendations 22 Appendix A List of...establishing reliable situational awareness from an OT per- spective, from manual change analysis to machine learning or artificial intelligence . From a...dark web, or following cybersecurity -related news. Workshop members identified other threat intelligence collection sources during the workshop, which

  18. Women in Astronomy Workshop Report

    Brough, Sarah; Bauer, Amanda E.; Brooks, Kate; Hopkins, Andrew; Maddison, Sarah

    2011-01-01

    Here we report on the Women in Astronomy Workshop (http://asawomeninastronomy.org/meetings/wia2011/), which was held on 13 May 2011 in Sydney, Australia. The workshop was organised by the Astronomical Society of Australia's Chapter on Women in Astronomy, to discuss some of the issues that face women in astronomy and make recommendations to help support the success of women in Australian astronomy but came to broader conclusions that have value for the whole astronomical community. The worksho...

  19. 3. Halden Reactor Project Workshop

    Louka, Michael N.

    2005-09-01

    A workshop was held in Halden 2nd-3rd March 2005 to discuss 'VR in the Future Industrial Workplace: Working Together - Regardless of Distance'. The workshop sessions and discussions focused on design, operations and maintenance, training, and engineering virtual reality systems, and provided useful insights into the current state of the art of research and development in the fields of virtual and augmented reality. (Author)

  20. Competitiveness Improvement Project Informational Workshop

    Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

    2018-02-27

    This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

  1. Transactions of the criticality alarm systems workshop

    1988-01-01

    The first Criticality Alarm workshop was held by the US Department of Energy Albuquerque Operations Office in 1985. This second workshop is the first held on an international level. There were 98 persons in attendance. They represented the Department of Energy (DOE) field offices, DOE contractors, the Nuclear Regulatory Commission (NRC), NRC licensees, and agencies in the United Kingdom, France, West Germany, and Japan. Topics were on practices experience, and development. A key value of the workshop was the sharing of critical alarm system experiences, problems, and advances in the state of the art. In addition, several Criticality Alarm Systems (CAS) equipment systems were exhibited. Papers were presented on: nature of criticality accidents; lessons learned from past accidents; application of ANS 8.3 standard; gamma and neutron detection systems; research and development in progress; testing at Oak Ridge and Los Alamos; methods used to place detectors; centralized readout feature; false alarms; trip-point settings; and testing and maintenance. The individual papers have been cataloged separately

  2. The fishbone workshop: How to transform

    Ipsen, Christine; Sørensen, Ole H.; Poulsen, Signe

    of this study is to create central intervention initiatives that relate to core health and organizational processes based on manager and employee involvement in a systematic process. This paper presents a method designed for that purpose: The Fishbone workshop. Procedures The purpose of the Fishbone workshop...... their written statements on a new FishBone chart labeled “Strain”. In cases where the answers are related, the post-it notes are clustered on one “side-bone” of the Fishbone. In the managers workshop they answer the same two question and fill two similar charts. The charts illustrate the employees’ and managers......”, “Challenging tasks”, “Meaning in the work”, “Solving the problem”, “Making the customers/users happy”. Examples of themes related to strain in the work are “Lack of recognition from management”, “Bad planning”, “Bottleneck in the work process“, “Lack of feedback”, “Lack of cooperation”, “Badly managed meetings...

  3. Proceedings of the switched power workshop

    Fernow, R.C.

    1988-01-01

    These proceedings contain most of the presentations given at a workshop on the current state of research in techniques for switched power acceleration. The proceedings are divided, as was the workshop itself, into two parts. Part 1, contains the latest results from a number of groups active in switched power research. The major topic here is a method for switching externally supplied power onto a transmission line. Advocates for vacuum photodiode switching, solid state switching, gas switching, and synthetic pulse generation are all presented. Other important areas of research described in this section concern: external electrical and laser pulsing systems; the properties of the created electromagnetic pulse; structures used for transporting the electromagnetic pulse to the region where the electron beam is located; and possible applications. Part 2 of the proceedings considers the problem of designing a high brightness electron gun using switched power as the power source. This is an important first step in demonstrating the usefulness of switched power techniques for accelerator physics. In addition such a gun could have immediate practical importance for advanced acceleration studies since the brightness could exceed that of present sources by several orders of magnitude. I would like to take this opportunity to thank Kathleen Tuohy and Patricia Tuttle for their assistance in organizing and running the workshop. Their tireless efforts contribute greatly to a very productive meeting

  4. 4th Penn State Bioinorganic Workshop

    Krebs, Carsten [Pennsylvania State Univ., University Park, PA (United States)

    2017-08-22

    The research area of biological inorganic chemistry encompasses a wide variety of subfields, including molecular biology, biochemistry, biophysics, inorganic chemistry, analytical chemistry, physical chemistry, and theoretical chemistry, as well as many different methods, such as biochemical characterization of enzymes, reaction kinetics, a plethora of spectroscopic techniques, and computational methods. The above methods are combined to understand the formation, function, and regulation of the many metallo-cofactors found in Nature as well as to identify novel metallo-cofactors. Many metalloenzyme-catalyzed reactions are extremely complex, but are of fundamental importance to science and society. Examples include (i) the reduction of the chemically inert molecule, dinitrogen, to ammonia by the enzyme nitrogenase (this reaction is fundamental for the production of nitrogen fertilizers); (ii) the oxidation of water to dioxygen by the Mn4Ca cluster found in photosystem II; and (iii) myriad reactions in which aliphatic, inert C-H bonds are cleaved for subsequent functionalization of the carbon atoms (the latter reactions are important in the biosynthesis of many natural products). Because of the broad range of areas and techniques employed in this field, research in bioinorganic chemistry is typically carried out collaboratively between two or more research groups. It is of paramount importance that researchers working in this field have a good, basic, working knowledge of many methods and approaches employed in the field, in order to design and discuss experiments with collaborators. Therefore, the training of students working in bioinorganic chemistry is an important aspect of this field. Hugely successful “bioinorganic workshops” were offered in the 1990s at The University of Georgia. These workshops laid the foundation for many of the extant collaborative research efforts in this area today. The large and diverse group of bioinorganic chemists at The

  5. Summary of the Workshop

    2012-01-01

    Key observations and messages for the program of work of the RK and M project The workshop delivered a large amount of information, ideas and visions, and a provided a fruitful forum for multidisciplinary reflection and discussion. Key observations and messages from the workshop are as follows: - The importance of having a common glossary is confirmed. - It is of interest to the project to better understand the contents of the current bibliography on RK and M. - Examples of memory loss and records misuse or misplacement exist both inside and outside the nuclear field. - The relationship between regulation and RK and M preservation for the long-term needs to be better understood. - RK and M preservation or loss and recovery scenarios can be constructed based on a wide range of future human-development hypotheses. - The relationship between RK and M preservation and safeguards needs further clarification. - National archives are a promising venue as one of the multiple approaches for long-term RK and M preservation. - Records management alone will not equip future generations to deal with long-term stores. - It is important to preserve not only technical records, but also records on the history of the program, including its siting within a community (metadata). - The interest in the history of the program should also be looked at from a heritage viewpoint. - Understanding the many ways that clues and records can be left in order that knowledge may be reconstituted by generations beyond those immediately succeeding us is important in this context. - In the same vein, while we must operate on the assumption that the intra-generational transmission chain continues to preserve RK and M, we have also to reach to farther-out generations directly in case the chain is broken. - The aim in reaching out to farther-out generations should be, as far as possible, that of informing them. - The set of data to be kept should be commensurate with the future need for the data and the

  6. 16th UK Workshop on Computational Intelligence

    Gegov, Alexander; Jayne, Chrisina; Shen, Qiang

    2017-01-01

    The book is a timely report on advanced methods and applications of computational intelligence systems. It covers a long list of interconnected research areas, such as fuzzy systems, neural networks, evolutionary computation, evolving systems and machine learning. The individual chapters are based on peer-reviewed contributions presented at the 16th Annual UK Workshop on Computational Intelligence, held on September 7-9, 2016, in Lancaster, UK. The book puts a special emphasis on novels methods and reports on their use in a wide range of applications areas, thus providing both academics and professionals with a comprehensive and timely overview of new trends in computational intelligence.

  7. PREFACE: The International Workshop on Positron Studies of Defects 2014

    Sugita, Kazuki; Shirai, Yasuharu

    2016-01-01

    The International Workshop on Positron Studies of Defects 2014 (PSD-14) was held in Kyoto, Japan from 14-19 September, 2014. The PSD Workshop brought together positron scientists interested in studying defects to an international platform for presenting and discussing recent results and achievements, including new experimental and theoretical methods in the field. The workshop topics can be characterized as follows: • Positron studies of defects in semiconductors and oxides • Positron studies of defects in metals • New experimental methods and equipment • Theoretical calculations and simulations of momentum distributions, positron lifetimes and other characteristics for defects • Positron studies of defects in combination with complementary methods • Positron beam studies of defects at surfaces, interfaces, in sub-surface regions and thin films • Nanostructures and amorphous materials

  8. Hands-On Surgical Training Workshop: an Active Role-Playing Patient Education for Adolescents.

    Wongkietkachorn, Apinut; Boonyawong, Pangpoom; Rhunsiri, Peera; Tantiphlachiva, Kasaya

    2017-09-01

    Most patient education involves passive learning. To improve patient education regarding surgery, an active learning workshop-based teaching method is proposed. The objective of this study was to assess level of patient surgical knowledge, achievement of workshop learning objectives, patient apprehension about future surgery, and participant workshop satisfaction after completing a surgical training workshop. A four-station workshop (surgical scrub, surgical suture, laparoscopic surgery, and robotic surgery) was developed to teach four important components of the surgical process. Healthy, surgery-naive adolescents were enrolled to attend this 1-h workshop-based training program. Training received by participants was technically and procedurally identical to training received by actual surgeons. Pre- and post-workshop questionnaires were used to assess learning outcomes. There were 1312 participants, with a mean age 15.9 ± 1.1 years and a gender breakdown of 303 males and 1009 females. For surgical knowledge, mean pre-workshop and post-workshop scores were 6.1 ± 1.5 and 7.5 ± 1.5 (out of 10 points), respectively (p education is an effective way to improve understanding of surgery-related processes. This teaching method may also decrease apprehension that patients or potential patients harbor regarding a future surgical procedure.

  9. Overview of the workshop

    Logsdon, Joe E.

    1989-01-01

    The Environmental Protection Agency (EPA) has the responsibility for development of Protective Action Guides (PAGs) except in the case of PAGs for food, the responsibility is shared with FDA. EPA participated in the development of the recommendations on PAGs for food and animal feed that FDA published in 1982. FDA is now in the process of revising their 1982 recommendations and we want to make every effort to assure that when their revisions are complete, we can concur and publish them in the PAG manual as EPA recommendations. Since USDA and States have the major role in the implementation of PAGs for water and food, we plan to closely coordinate the development process with them. This Workshop is designed as a forum for those who have experience in planning for and responding to ingestion exposure scenarios. The objective is to identify and discuss all of the issues, problems, relevant experiences, and needed or ongoing research that should be considered in the development of PAGs for water and food. Although the Federal agencies will not be able to resolve all of the identified issues and problems to everyone's satisfaction, it is expected that they will have at least considered them carefully and will be prepared to explain why they chose a particular approach or solution. This process should significantly reduce the need for changes to drafts of the guidance based on reviewer comments

  10. Gas calorimeter workshop: proceedings

    1982-01-01

    Gas calorimeters combining functions of energy measurement and fine tracking have become more and more popular in the past few years. They help identify muons, gammas, electrons, and hadrons within dense tracks from transverse and longitudinal shower development. Fine segmentation capability using pads and strips on the cathodes have made gas-sampling calorimeters very attractive for colliding-beam detectors where a large multiplicity of particles are detected in a projected geometry. Linearity, energy resolution, shower position resolution, multishower resolution, and calibration questions were discussed in detail at the workshop. Ease of energy calibration by monitoring radioactive sources, good gain uniformity, and gain stability obtained were among the topics of the speakers. There was a discussion session on the operation mode of wire chambers. Gas calorimeters have been used successfully at CERN, Cornell, Fermilab, and SLAC for experiments. Some of the results from those large-scale devices were reported. Future usage of gas-sampling calorimeters for colliding-beam experiments at Fermilab and CERN were discussed. Wire chambers using extruded conductive plastic tubes have made construction easy of pads and strips which can conveniently read out induced signals from the cathode. The results of extensive studies on such devices were discussed. Separate entries were prepared for the data base for the 17 papers presented

  11. VLLEEM-2 technical workshop

    NONE

    2003-07-01

    In order to overcome the limits of the energy-environment models, and to benefit at the same time of their past experiences, the VLEEM project proposes a genuine approach and innovative modelling tools to assess the energy-environment systems over the very long term, which are based on the strengths of existing long term energy models, but focussed on two major objectives: to describe normative futures which fit with a set of overall constraints, like the stabilisation of the concentration of green-house gases in the atmosphere, or the stabilisation of the overall inventory of plutonium and minor actinides, etc...; to describe and formalize the association of causalities necessary to bring the system from the present situation to the targeted future, through a '' back-casting '' approach. This first technical workshop presents the state of the art of the different Work Programmes. WP1:Enhancement of the Conceptual framework. WP2: Data base on conventional demand/supply technologies. WP3: Complement and up-date technology monographs. WP4: Formalization and computing of final VLEEM submodels. WP5: Case study 2030, 2050, 2100. (A.L.B.)

  12. A Method to Determine Energy and Power of a Fracture Process in Polycrystals by Means of HVTEM

    Pedro Alejandro Tamayo-Meza

    2014-01-01

    Full Text Available Main crack propagation process in polycrystalline materials is very complex due to intercrystalline sliding mechanism effects. Multiple factors make it considerably difficult to analyze the state of stresses in the crack tip within the theoretical scope of linear fracture mechanics (LFM. As a basis for the suggested Bilby-Cottrell-Swinden model, we propose a method to determine the state of stresses in the tip of a propagating crack in microspecimens subjected to tension and measured inside a high voltage transmission electron microscope (HVTEM. Based on the electron microscopy observations of a main crack and the formation of microcracks in the plastic zone, the J-integral was determined.

  13. Impact of After-School Nutrition Workshops in a Public Library Setting

    Freedman, Marjorie R.; Nickell, Audrey

    2010-01-01

    Objective: To determine if after-school nutrition workshops conducted in public libraries were related to lasting changes in food choice. Methods: "Snack Smart" workshops, based on Social Cognitive Theory, were conducted in 8 branch libraries (49 ethnically diverse children, ages 9 to 14) to assess changes in consumption of targeted food items by…

  14. Workshop Design Thinking t.b.v. Conferentie O&O-leren op de PABO

    Marijke Grotenhuis

    2015-01-01

    Uitwerking van een workshop. In deze workshop ga je aan de slag met de methode DT: Design Thinking (Stanford University Institute of Design). Het is een creatief proces dat je kunt inzetten om betekenisvolle oplossingen te bedenken in de klas, op school en in je netwerk. Met meerdere mensen neem je

  15. Guiding Music Students during Workshop-Based On-the-Job Learning

    Virkkula, Esa; Kunwar, Jagat Bahadur

    2017-01-01

    This article explains the realisation and impact of tutoring on learning through a new kind of on-the-job learning method in workshops led by professional musicians. The research is a qualitative case study involving 62 upper secondary Finnish vocational music students who participated in 11 workshops. The research data consist of (a) workshop…

  16. 2nd Topical Workshop on Laser Technology and Optics Design

    2013-01-01

    Lasers have a variety of applications in particle accelerator operation and will play a key role in the development of future particle accelerators by improving the generation of high brightness electron and exotic ion beams and through increasing the acceleration gradient. Lasers will also make an increasingly important contribution to the characterization of many complex particle beams by means of laser-based beam diagnostics methods. The second LANET topical workshop will address the key aspects of laser technology and optics design relevant to laser application to accelerators. The workshop will cover general optics design, provide an overview of different laser sources and discuss methods to characterize beams in details. Participants will be able to choose from a range of topical areas that go deeper in more specific aspects including tuneable lasers, design of transfer lines, noise sources and their elimination and non-linear optics effects. The format of the workshop will be mainly training-based wit...

  17. Workshops and problems for benchmarking eddy current codes

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-08-01

    A series of six workshops was held in 1986 and 1987 to compare eddy current codes, using six benchmark problems. The problems included transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems were based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. A second two-year series of TEAM (Testing Electromagnetic Analysis Methods) workshops, using six more problems, is underway. 12 refs., 15 figs., 4 tabs.

  18. Proceedings of the 2010 renewable energy infrastructure workshop

    2010-01-01

    This workshop provided a forum for electric power industry leaders and key stakeholders to discuss Canada's renewable energy infrastructure needs. The workshop was held to provide practical solutions for meeting the increased demand for renewable energy as well as to offer a range of marketplace options and funding opportunities. Participants in the workshop examined the regulatory framework of the Green Energy Act and its potential impact on organizations. Approval process procedures for renewable energy projects were reviewed, and methods of ensuring the integration of renewable energy projects with current business strategies were discussed. Communications strategies for managing the public perception of energy project were presented. Policy barriers to infrastructure development were outlined. Methods of developing partnerships with Aboriginal communities were also discussed. The conference featured 16 presentations, of which 3 have been catalogued separately for inclusion in this database. tabs., figs.

  19. Workshops and problems for benchmarking eddy current codes

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-08-01

    A series of six workshops was held in 1986 and 1987 to compare eddy current codes, using six benchmark problems. The problems included transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems were based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. A second two-year series of TEAM (Testing Electromagnetic Analysis Methods) workshops, using six more problems, is underway. 12 refs., 15 figs., 4 tabs

  20. Physics Analysis Tools Workshop Report

    Assamagan, K A

    A Physics Analysis Tools (PAT) workshop was held at the University of Tokyo in Tokyo Japan on May 15-19, 2006. Unlike the previous ones, this workshop brought together the core PAT developers and ATLAS users. The workshop was attended by 69 people from various institutions: Australia 5 Canada 1 China 6 CERN 4 Europe 7 Japan 32 Taiwan 3 USA 11 The agenda consisted of a 2-day tutorial for users, a 0.5-day user feedback discussion session between users and developers, and a 2-day core PAT workshop devoted to issues in Physics Analysis Tools activities. The tutorial, attended by users and developers, covered the following grounds: Event Selection with the TAG Event Selection Using the Athena-Aware NTuple Event Display Interactive Analysis within ATHENA Distributed Analysis Monte Carlo Truth Tools Trigger-Aware Analysis Event View By many accounts, the tutorial was useful. This workshop was the first time that the ATLAS Asia-Pacific community (Taiwan, Japan, China and Australia) go...

  1. Methods Engineering Workshop for the Shipbuilding Industry

    Cunningham III, Maurice W

    1985-01-01

    .... In order to raise the awareness of shipyard decision makers to the benefits of scientific management and to promote the use of an analytical approach to problem solving in shipbuilding, a forum...

  2. Applications of ion beam analysis workshop. Workshop handbook

    1995-01-01

    A workshop on applications of ion beam analysis was held at ANSTO, immediate prior to the IBMM-95 Conference in Canberra. It aims was to review developments and current status on use of ion beams for analysis, emphasizing the following aspects: fundamental ion beam research and secondary effects of ion beams; material sciences, geological, life sciences, environmental and industrial applications; computing codes for use in accelerator research; high energy heavy ion scattering and recoil; recent technological development using ion beams. The handbook contains the workshop's program, 29 abstracts and a list of participants

  3. International Workshop on Traffic and Granular Flow

    Herrmann, Hans; Schreckenberg, Michael; Wolf, Dietrich; Social, Traffic and Granular Dynamics

    2000-01-01

    "Are there common phenomena and laws in the dynamic behavior of granular materials, traffic, and socio-economic systems?" The answers given at the international workshop "Traffic and Granular Flow '99" are presented in this volume. From a physical standpoint, all these systems can be treated as (self)-driven many-particle systems with strong fluctuations, showing multistability, phase transitions, non-linear waves, etc. The great interest in these systems is due to several unexpected new discoveries and their practical relevance for solving some fundamental problems of today's societies. This includes intelligent measures for traffic flow optimization and methods from "econophysics" for stabilizing (stock) markets.

  4. Three-body charmless B decays workshop

    Ben-Haim, E.; Chauveau, J.; Hartfiel, B.; Ocariz, J. [Laboratoire de Physique Nucleaire et de Hautes Energies (LPNHE), 75 - Paris (France); Charles, J. [LPT, 13 - Marseille (France)

    2006-07-01

    The purpose of this workshop was multifarious: -) to present and discuss the current experimental perspectives based on the full expected statistics from B-factories by 2008, -) to share and further develop analysis methods, -) to present and discuss the theoretical work on the subject, -) to discuss the future of B-factories, and -) to establish a work plan until 2009. The contributions have focused on 3 body charmless B decays and mostly 3 body hadronic charmless B decays, they have also dealt with semileptonic decays, radiative decays, charm and charmonium decays, and scattering processes. This document gathers the slides of the presentations.

  5. Supporting research projects via student workshops

    Marschall, Max; Schmeck, Michel; Gengnagel, Christoph

    2016-01-01

    As part of a joint research project between the Centre for Information Technology and Architecture (CITA) and te Department for Structural Design and Technology (KET), a one week student workshop was organised at the Royal Danish Academy of Fine Arts (KADK) in Copenhagen. This paper outlines...... the teaching methods applied to reach maximum insight from student interaction, despite the unfamiliarity the students had with the research matter: physical and numeric form-finding for lightweight hybrid structures. Hybrid structures are defined here as combining different components of low stiffness...

  6. Three-body charmless B decays workshop

    Ben-Haim, E.; Chauveau, J.; Hartfiel, B.; Ocariz, J.; Charles, J.

    2006-01-01

    The purpose of this workshop was multifarious: -) to present and discuss the current experimental perspectives based on the full expected statistics from B-factories by 2008, -) to share and further develop analysis methods, -) to present and discuss the theoretical work on the subject, -) to discuss the future of B-factories, and -) to establish a work plan until 2009. The contributions have focused on 3 body charmless B decays and mostly 3 body hadronic charmless B decays, they have also dealt with semileptonic decays, radiative decays, charm and charmonium decays, and scattering processes. This document gathers the slides of the presentations

  7. Workshop on advances in smooth particle hydrodynamics

    Wingate, C.A.; Miller, W.A.

    1993-12-31

    This proceedings contains viewgraphs presented at the 1993 workshop held at Los Alamos National Laboratory. Discussed topics include: negative stress, reactive flow calculations, interface problems, boundaries and interfaces, energy conservation in viscous flows, linked penetration calculations, stability and consistency of the SPH method, instabilities, wall heating and conservative smoothing, tensors, tidal disruption of stars, breaking the 10,000,000 particle limit, modelling relativistic collapse, SPH without H, relativistic KSPH avoidance of velocity based kernels, tidal compression and disruption of stars near a supermassive rotation black hole, and finally relativistic SPH viscosity and energy.

  8. Workshop on the RHIC performance

    Khiari, F.; Milutinovic, J.; Ratti, A.; Rhoades-Brown, M.J. (eds.)

    1988-07-01

    The most recent conceptual design manual for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven was published in May 1986 (BNL 51932). The purpose of this workshop was to review the design specifications in this RHIC reference manual, and to discuss in detail possible improvements in machine performance by addressing four main areas. These areas are beam-beam interactions, stochastic cooling, rf and bunch instabilities. The contents of this proceedings are as follows. Following an overview of the workshop, in which the motivation and goals are discussed in detail, transcripts of the first day talks are given. Many of these transcripts are copies of the original transparencies presented at the meeting. The following four sections contain contributed papers, that resulted from discussions at the workshop within each of the four working groups. In addition, there is a group summary for each of the four working groups at the beginning of each section. Finally, a list of participants is given.

  9. Cleanroom Energy Efficiency Workshop Proceedings

    Tschudi, Bill

    1999-03-15

    On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

  10. Photovoltaic performance and reliability workshop

    Mrig, L. [ed.

    1993-12-01

    This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

  11. H2@Scale Workshop Report

    Pivovar, Bryan

    2017-03-31

    Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stage demonstration activities that can enable hydrogen as an energy carrier at a national scale.

  12. Lateral force calibration in atomic force microscopy: A new lateral force calibration method and general guidelines for optimization

    Cannara, Rachel J.; Eglin, Michael; Carpick, Robert W.

    2006-01-01

    Proper force calibration is a critical step in atomic and lateral force microscopies (AFM/LFM). The recently published torsional Sader method [C. P. Green et al., Rev. Sci. Instrum. 75, 1988 (2004)] facilitates the calculation of torsional spring constants of rectangular AFM cantilevers by eliminating the need to obtain information or make assumptions regarding the cantilever's material properties and thickness, both of which are difficult to measure. Complete force calibration of the lateral signal in LFM requires measurement of the lateral signal deflection sensitivity as well. In this article, we introduce a complete lateral force calibration procedure that employs the torsional Sader method and does not require making contact between the tip and any sample. In this method, a colloidal sphere is attached to a 'test' cantilever of the same width, but different length and material as the 'target' cantilever of interest. The lateral signal sensitivity is calibrated by loading the colloidal sphere laterally against a vertical sidewall. The signal sensitivity for the target cantilever is then corrected for the tip length, total signal strength, and in-plane bending of the cantilevers. We discuss the advantages and disadvantages of this approach in comparison with the other established lateral force calibration techniques, and make a direct comparison with the 'wedge' calibration method. The methods agree to within 5%. The propagation of errors is explicitly considered for both methods and the sources of disagreement discussed. Finally, we show that the lateral signal sensitivity is substantially reduced when the laser spot is not centered on the detector

  13. Li'l Red Schoolhouse workshops

    1993-01-01

    Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

  14. 78 FR 33849 - Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request...

    2013-06-05

    ... after the public workshop on the Internet at http://www.fda.gov/MedicalDevices/NewsEvents/Workshops..., compact, and mobile, the number of battery-powered medical devices will continue to increase. While many...] Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request for...

  15. Physics beyond Colliders Kickoff Workshop

    2016-01-01

    The aim of the workshop is to explore the opportunities offered by the CERN accelerator complex and infrastructure to get new insights into some of today's outstanding questions in particle physics through projects complementary to high-energy colliders and other initiatives in the world. The focus is on fundamental physics questions that are similar in spirit to those addressed by high-energy colliders, but that may require different types of experiments. The kickoff workshop is intended to stimulate new ideas for such projects, for which we encourage the submission of abstracts.

  16. Workshop on Physics Beyond Colliders

    2016-01-01

    The aim of the workshop is to explore the opportunities offered by the CERN accelerator complex and infrastructure to get new insights into some of today's outstanding questions in particle physics through projects complementary to high-energy colliders and other initiatives in the world. The focus is on fundamental physics questions that are similar in spirit to those addressed by high-energy colliders, but that may require different types of experiments. The kick-off workshop is intended to stimulate new ideas for such projects, for which we encourage the submission of abstracts.

  17. 1993 Radiation Protection Workshop: Proceedings

    1993-12-31

    The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database.

  18. 1993 Radiation Protection Workshop: Proceedings

    1993-01-01

    The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database

  19. Summary of experimental insertions workshop

    Sandweiss, J.; Month, M.

    1976-01-01

    The last ISABELLE workshop of the summer 1976 series, which was held at Brookhaven, August 16-20, focused on the design and utilization of the experimental insertions. The goals of the workshop, which were somewhat more general than might be suggested by the title, are: (1) review the ISABELLE proposal from the point of view of experimental use; (2) contribute useful information on the ''open questions'' in the ISABELLE design; (3) develop data for experimental equipment and operating cost estimates; and (4) project a first approximation to ISABELLE operating modes

  20. International workshop on multimodal virtual and augmented reality (workshop summary)

    Hürst, W.O.; Iwai, Daisuke; Balakrishnan, Prabhakaran

    2016-01-01

    Virtual reality (VR) and augmented reality (AR) are expected by many to become the next wave of computing with significant impacts on our daily lives. Motivated by this, we organized a workshop on “Multimodal Virtual and Augmented Reality (MVAR)” at the 18th ACM International Conference on

  1. International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

    1999-08-01

    Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

  2. Proceedings of the Digital Systems Reliability and Nuclear Safety Workshop

    Wallace, D. R.; Cuthill, B. B.; Ippolito, L. M. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Beltracchi, L. [Nuclear Regulatory Commission, Washington, DC (United States) ed.

    1994-03-01

    The United States Nuclear Regulatory Commission (NRC), in cooperation with the National Institute of Standards and Technology conducted the.Digital Systems Reliability and Nuclear Safety Workshop on September 13--14, 1993, in Rockville, Maryland. The workshop provided a forum for the exchange of information among experts within the nuclear industry, experts from other industries, regulators and academia. The information presented at this workshop provided in-depth exposure of the NRC staff and the nuclear industry to digital systems design safety issues and also provided feedback to the NRC from outside experts regarding identified safety issues, proposed regulatory positions, and intended research associated with the use of digital systems in nuclear power plants. Technical presentations provided insights on areas where current software engineering practices may be inadequate for safety-critical systems, on potential solutions for development issues, and on methods for reducing risk in safety-critical systems. This report contains an analysis of results of the workshop, the papers presented panel presentations, and summaries of, discussions at this workshop. The individual papers have been cataloged separately.

  3. IFPA meeting 2012 workshop report I

    Ackerman, W E; Carter, Anthony Michael; De Mestre, A M

    2013-01-01

    Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At IFPA meeting 2012 there were twelve themed workshops, three of which are summarized in this report. These workshops related to various aspects of placental biology but collectively...

  4. IFPA Meeting 2013 Workshop Report II

    Ackerman, W E; Adamson, L; Carter, Anthony Michael

    2013-01-01

    Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At the IFPA meeting 2013 twelve themed workshops were presented, five of which are summarized in this report. These workshops related to various aspects of placental biology but collecti...

  5. Systems Engineering 2010 Workshop | Wind | NREL

    0 Workshop Systems Engineering 2010 Workshop The 1st NREL Wind Energy Systems Engineering Workshop of the system engineering model. In the middle of the model is optimization, metric tracking &M model, capital cost model, and balance of station. Systems engineering represents a holistic

  6. IFPA meeting 2010 workshop report I

    Abad, C.; Antczak, D.F.; Carvalho, J.

    2011-01-01

    Workshops are an important part of the IFPA annual meeting. At IFPA Meeting 2010 there were twelve themed workshops, six of which are summarized in this report. 1. The immunology workshop focused on normal and pathological functions of the maternal immune system in pregnancy. 2. The transport wor...

  7. Teaching emergency medicine with workshops improved medical student satisfaction in emergency medicine education.

    Sricharoen, Pungkava; Yuksen, Chaiyaporn; Sittichanbuncha, Yuwares; Sawanyawisuth, Kittisak

    2015-01-01

    There are different teaching methods; such as traditional lectures, bedside teaching, and workshops for clinical medical clerkships. Each method has advantages and disadvantages in different situations. Emergency Medicine (EM) focuses on emergency medical conditions and deals with several emergency procedures. This study aimed to compare traditional teaching methods with teaching methods involving workshops in the EM setting for medical students. Fifth year medical students (academic year of 2010) at Ramathibodi Hospital, Faculty of Medicine, Mahidol University, Bangkok, Thailand participated in the study. Half of students received traditional teaching, including lectures and bedside teaching, while the other half received traditional teaching plus three workshops, namely, airway workshop, trauma workshop, and emergency medical services workshop. Student evaluations at the end of the clerkship were recorded. The evaluation form included overall satisfaction, satisfaction in overall teaching methods, and satisfaction in each teaching method. During the academic year 2010, there were 189 students who attended the EM rotation. Of those, 77 students (40.74%) were in the traditional EM curriculum, while 112 students were in the new EM curriculum. The average satisfaction score in teaching method of the new EM curriculum group was higher than the traditional EM curriculum group (4.54 versus 4.07, P-value workshop, bedside teaching, and emergency medical services workshop. The mean (standard deviation) satisfaction scores of those three teaching methods were 4.70 (0.50), 4.63 (0.58), and 4.60 (0.55), respectively. Teaching EM with workshops improved student satisfaction in EM education for medical students.

  8. Workshops and problems for benchmarking eddy current codes

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-02-01

    A series of six workshops was held to compare eddy current codes, using six benchmark problems. The problems include transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems are based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. 13 refs., 1 tab

  9. Machine Learning Technologies and Their Applications for Science and Engineering Domains Workshop -- Summary Report

    Ambur, Manjula; Schwartz, Katherine G.; Mavris, Dimitri N.

    2016-01-01

    The fields of machine learning and big data analytics have made significant advances in recent years, which has created an environment where cross-fertilization of methods and collaborations can achieve previously unattainable outcomes. The Comprehensive Digital Transformation (CDT) Machine Learning and Big Data Analytics team planned a workshop at NASA Langley in August 2016 to unite leading experts the field of machine learning and NASA scientists and engineers. The primary goal for this workshop was to assess the state-of-the-art in this field, introduce these leading experts to the aerospace and science subject matter experts, and develop opportunities for collaboration. The workshop was held over a three day-period with lectures from 15 leading experts followed by significant interactive discussions. This report provides an overview of the 15 invited lectures and a summary of the key discussion topics that arose during both formal and informal discussion sections. Four key workshop themes were identified after the closure of the workshop and are also highlighted in the report. Furthermore, several workshop attendees provided their feedback on how they are already utilizing machine learning algorithms to advance their research, new methods they learned about during the workshop, and collaboration opportunities they identified during the workshop.

  10. 4. Workshop - Measurement techniques of stationary and transient multiphase flow

    Prasser, H.M. (ed.)

    2001-05-01

    In November 2000, the 4th Workshop on Measurement Techniques for Stationary and Transient Multiphase Flows took place in Rossendorf. Three previous workshops of this series were national meetings; this time participants from different countries took part. The programme comprised 14 oral presentations, 9 of which are included in these proceedings in full length. A special highlight of the meeting was the main lecture ''Ultrasonic doppler method for bubbly flow measurement'' of Professor Masanori Aritomi, Dr. Hiroshige Kikura and Dr. Yumiko Suzuki. The workshop again dealt with high-resolution phase distribution and phase velocity measurement techniques based on electrical conductivity, ultrasound, laser light and high-speed cinematography. A number of presentations were dedicated to the application of wire-mesh sensors developed by FZR for different applications used by the Technical Universities of Delft and Munich and the Tokyo Institute of Technology. (orig.)

  11. Diversity in Action | Interactive Workshop | 2nd edition | 22 October

    2013-01-01

    The CERN Diversity Programme has designed an interactive workshop to creatively explore the meaning of diversity. Come, take part, and share your experience of working with differences at CERN.   Tuesday 22 October 2013 – 1.30 p.m. - 5.30 p.m. Pump Hall - Building 216-R-401 "Diversity in Action" is an interactive half-day workshop designed to creatively explore the meaning and importance of diversity at CERN, in support of the Organization’s value of “appreciating differences, fostering equality and promoting collaboration”. Using participative multi-media methods, this innovative workshop will provide participants with insights into diversity, help them to develop greater sensitivity to differences, explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. Virginia Humud Guerrero is a seasoned professional and HR expert who has spent a considerable part of her career in UN agencies worl...

  12. 4. Workshop - Measurement techniques of stationary and transient multiphase flow

    Prasser, H.M.

    2001-05-01

    In November 2000, the 4th Workshop on Measurement Techniques for Stationary and Transient Multiphase Flows took place in Rossendorf. Three previous workshops of this series were national meetings; this time participants from different countries took part. The programme comprised 14 oral presentations, 9 of which are included in these proceedings in full length. A special highlight of the meeting was the main lecture ''Ultrasonic doppler method for bubbly flow measurement'' of Professor Masanori Aritomi, Dr. Hiroshige Kikura and Dr. Yumiko Suzuki. The workshop again dealt with high-resolution phase distribution and phase velocity measurement techniques based on electrical conductivity, ultrasound, laser light and high-speed cinematography. A number of presentations were dedicated to the application of wire-mesh sensors developed by FZR for different applications used by the Technical Universities of Delft and Munich and the Tokyo Institute of Technology. (orig.)

  13. First Krakow-Berlin workshop on nuclear physics. Slide report

    Styczen, J. [comp.] [Institute of Nuclear Physics, Cracow (Poland); Maier, K.H. [comp.] [Hahn-Meitner-Institut Berlin GmbH (Germany)

    1992-12-31

    In this workshop new experimental and theoretical results in nuclear spectroscopy are presented. For several nuclei new data: energy level schemes, electromagnetic transitions, quadrupole moments, and nuclear deformation parameters are presented. New nuclei excitation methods and the new detector for the OSIRIS spectrometer are also discussed.

  14. IEA Vehicle Efficiency Workshops Drive New Vehicle Policy Approaches

    NONE

    2007-07-01

    Fuel economy is not only about getting more performance from the engine. Components outside the engine are also large fuel consumers. If fuel-economy test methods always remembered that, vehicle manufacturers would optimise component performance. A number of initiatives addressing component test standards and related policies have been triggered by IEA's recent workshops.

  15. First Krakow-Berlin workshop on nuclear physics. Slide report

    Styczen, J.; Maier, K.H.

    1992-01-01

    In this workshop new experimental and theoretical results in nuclear spectroscopy are presented. For several nuclei new data: energy level schemes, electromagnetic transitions, quadrupole moments, and nuclear deformation parameters are presented. New nuclei excitation methods and the new detector for the OSIRIS spectrometer are also discussed

  16. Influence of an integral life practice workshop on health and ...

    The aim of the present investigation was to evaluate the effect of an Integral Life Practice workshop on perceptions of health and spirituality. An integral psychological approach using mixed quantitative and qualitative methods in a pre- and post-test, quasi experimental and control group design was used to assess changes ...

  17. Rule based design workshop at the TU Berlin

    Tamke, Martin; Palz, Norbert; Josefsson, Kristoffer

    and design concepts to lead into a second workshop further exploring digital design and fabrication tools. The goal is to produce a full-scale prototype to test the ideas, methods and materials. This paper focuses on digital design & fabrication via a pedagogical exploration between academics...

  18. Mini-Proceedings of ECT Workshop Strangeness in Nuclei

    Zmeskal, J

    2011-01-01

    This workshop brought together international experts in the research area of strangeness in nuclei physics, working on theory as well as on experiments, to discuss the present status, to develop new methods of analysis and to have the opportunity for brainstorming towards future studies, going towards a deeper understanding of the hot topics in the low-energy QCD in the strangeness sector.

  19. Spent fuel workshop'2002

    Poinssot, Ch.

    2002-01-01

    This document gathers the transparencies of the presentations given at the 2002 spent fuel workshop: Session 1 - Research Projects: Overview on the IN CAN PROCESSES European project (M. Cowper), Overview on the SPENT FUEL STABILITY European project (C. Poinssot), Overview on the French R and D project on spent fuel long term evolution, PRECCI (C. Poinssot); Session 2 - Spent Fuel Oxidation: Oxidation of uranium dioxide single crystals (F. Garrido), Experimental results on SF oxidation and new modeling approach (L. Desgranges), LWR spent fuel oxidation - effects of burn-up and humidity (B. Hanson), An approach to modeling CANDU fuel oxidation under dry storage conditions (P. Taylor); Session 3 - Spent Fuel Dissolution Experiments: Overview on high burnup spent fuel dissolution studies at FZK/INE (A. Loida), Results on the influence of hydrogen on spent fuel leaching (K. Spahiu), Leaching of spent UO 2 fuel under inert and reducing conditions (Y. Albinsson), Fuel corrosion investigation by electrochemical techniques (D. Wegen), A reanalysis of LWR spent fuel flow through dissolution tests (B. Hanson), U-bearing secondary phases formed during fuel corrosion (R. Finch), The near-field chemical conditions and spent fuel leaching (D. Cui), The release of radionuclides from spent fuel in bentonite block (S.S. Kim), Trace actinide behavior in altered spent fuel (E. Buck, B. Hanson); Session 4 - Radiolysis Issues: The effect of radiolysis on UO 2 dissolution determined from electrochemical experiments with 238 Pu doped UO 2 M. Stroess-Gascoyne (F. King, J.S. Betteridge, F. Garisto), doped UO 2 studies (V. Rondinella), Preliminary results of static and dynamic dissolution tests with α doped UO 2 in Boom clay conditions (K. Lemmens), Studies of the behavior of UO 2 / water interfaces under He 2+ beam (C. Corbel), Alpha and gamma radiolysis effects on UO 2 alteration in water (C. Jegou), Behavior of Pu-doped pellets in brines (M. Kelm), On the potential catalytic behavior of

  20. Welcome from the Workshop Chairs

    Berntsson Svensson, Richard; Daneva, Maia; Marczak, Sabrina; Ernst, Neil; Madhavji, N.

    2015-01-01

    Welcome to the fifth International Workshop on Empirical Requirements Engineering (EmpiRE 2015) at RE’15! In the past few years, some important developments in the Information Technology Services marketplace as well as in the software industry in particular fueled the debate on the evaluation of

  1. 2nd Ralf Yorque Workshop

    1985-01-01

    These are the proceedings of the Second R. Yorque Workshop on Resource Management which took place in Ashland, Oregon on July 23-25, 1984. The purpose of the workshop is to provide an informal atmosphere for the discussion of resource assessment and management problems. Each participant presented a one hour morning talk; afternoons were reserved for informal chatting. The workshop was successful in stimulating ideas and interaction. The papers by R. Deriso, R. Hilborn and C. Walters all address the same basic issue, so they are lumped together. Other than that, the order to the papers in this volume was determined in the same fashion as the order of speakers during the workshop -- by random draw. Marc Mangel Department of Mathematics University of California Davis, California June 1985 TABLE OF CONTENTS A General Theory for Fishery Modeling Jon Schnute Data Transformations in Regression Analysis with Applications to Stock-Recruitment Relationships David Ruppert and Raymond J. Carroll ••••••. •�...

  2. WORKSHOP: Electron-positron mystery

    Bokemeyer, H.; Mueller, B.

    1989-01-01

    The tightly correlated electron-positron pairs seen in experiments at the GSI Darmstadt heavy ion Laboratory and elsewhere have yet to be explained. New particle or new effect? The question was highlighted at a recent Moriond workshop held at Les Arcs in the French Alps in January

  3. VBSCan Split 2017 Workshop Summary

    Anders, Christoph Falk; et al.

    2018-01-12

    This document summarises the talks and discussions happened during the VBSCan Split17 workshop, the first general meeting of the VBSCan COST Action network. This collaboration is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered by existing and future particle colliders.

  4. 2017 NREL Photovoltaic Reliability Workshop

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-15

    NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

  5. Workshops on radiation imaging detectors

    Sochinskii, N V; Sun, G C; Kostamo, P; Silenas, A; Saynatjoki, A; Grant, J; Owens, A; Kozorezov, A G; Noschis, E; Van Eijk, C; Nagarkar, V; Sekiya, H; Pribat, D; Campbell, M; Lundgren, J; Arques, M; Gabrielli, A; Padmore, H; Maiorino, M; Volpert, M; Lebrun, F; Van der Putten, S; Pickford, A; Barnsley, R; Anton, M E.G.; Mitschke, M; Gros d' Aillon, E; Frojdh, C; Norlin, B; Marchal, J; Quattrocchi, M; Stohr, U; Bethke, K; Bronnimann, C H; Pouvesle, J M; Hoheisel, M; Clemens, J C; Gallin-Martel, M L; Bergamaschi, A; Redondo-Fernandez, I; Gal, O; Kwiatowski, K; Montesi, M C; Smith, K

    2005-07-01

    This document gathers the transparencies that were presented at the international workshop on radiation imaging detectors. 9 sessions were organized: 1) materials for detectors and detector structure, 2) front end electronics, 3) interconnected technologies, 4) space, fusion applications, 5) the physics of detection, 6) industrial applications, 7) synchrotron radiation, 8) X-ray sources, and 9) medical and other applications.

  6. Workshops on radiation imaging detectors

    Sochinskii, N.V.; Sun, G.C.; Kostamo, P.; Silenas, A.; Saynatjoki, A.; Grant, J.; Owens, A.; Kozorezov, A.G.; Noschis, E.; Van Eijk, C.; Nagarkar, V.; Sekiya, H.; Pribat, D.; Campbell, M.; Lundgren, J.; Arques, M.; Gabrielli, A.; Padmore, H.; Maiorino, M.; Volpert, M.; Lebrun, F.; Van der Putten, S.; Pickford, A.; Barnsley, R.; Anton, M.E.G.; Mitschke, M.; Gros d'Aillon, E.; Frojdh, C.; Norlin, B.; Marchal, J.; Quattrocchi, M.; Stohr, U.; Bethke, K.; Bronnimann, C.H.; Pouvesle, J.M.; Hoheisel, M.; Clemens, J.C.; Gallin-Martel, M.L.; Bergamaschi, A.; Redondo-Fernandez, I.; Gal, O.; Kwiatowski, K.; Montesi, M.C.; Smith, K.

    2005-01-01

    This document gathers the transparencies that were presented at the international workshop on radiation imaging detectors. 9 sessions were organized: 1) materials for detectors and detector structure, 2) front end electronics, 3) interconnected technologies, 4) space, fusion applications, 5) the physics of detection, 6) industrial applications, 7) synchrotron radiation, 8) X-ray sources, and 9) medical and other applications

  7. Physics Analysis Tools Workshop 2007

    Elizabeth Gallas,

    The ATLAS PAT (Physics Analysis Tools) group evaluates, develops and tests software tools for the analysis of physics data, consistent with the ATLAS analysis and event data models. Following on from earlier PAT workshops in London (2004), Tucson (2005) and Tokyo (2006), this year's workshop was hosted by the University of Bergen in Norway on April 23-28 with more than 60 participants. The workshop brought together PAT developers and users to discuss the available tools with an emphasis on preparing for data taking. At the start of the week, workshop participants, laptops and power converters in-hand, jumped headfirst into tutorials, learning how to become trigger-aware and how to use grid computing resources via the distributed analysis tools Panda and Ganga. The well organised tutorials were well attended and soon the network was humming, providing rapid results to the users and ample feedback to the developers. A mid-week break was provided by a relaxing and enjoyable cruise through the majestic Norwegia...

  8. Django Girls 2017 Workshop Saturday

    Lapka, Marzena

    2017-01-01

    On 7th and 8th April 2017 CERN welcomed its second Django Girls Geneva event at IdeaSquare. The workshop was organised by the CERN IT Department, Diversity and Local Engagement teams. Many volunteered helped to make it happen.

  9. Workshop nieuwe kansen voor eiwit

    Peet, van der G.F.V.; Kamp, J.A.L.M.

    2011-01-01

    The Ministry of EL&I has asked Wageningen UR to organize a workshop giving the State of the Art of the research on 'new proteins' and results in an agenda for new research. The most perspective mentioned business cases are: 1. Biorefinery, 2. Insects, 3. Dried legumes (beans) and 4. Cultivation

  10. Invenio User Group Workshop 2015

    2015-01-01

    The workshop is intended for Invenio administrators and will consist of a series of lectures, practical exercises, and discussions with Invenio developers. The goal is to enable better understanding of Invenio features and capabilities, to discuss specific needs, forthcoming features and developments, etc.

  11. Workshop #7 Toentje: Stakeholder Canvas

    Levelt, M.

    2017-01-01

    Op vrijdag 19 mei vond alweer de zevende R-LINK Workshop plaats tijdens de driedaagse in Groningen. In de voormalige drankenfabriek van de Firma Woldring en Idema aan de Paradijsvogelstraat zaten onderzoekers samen met betrokkenen van Toentje, Bie de Buuf en de Oosterparkwijk om tafel in

  12. The Danish Scenario Workshop Report

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    with informal drinks) and planned and carried out as recommended in Ahumada (2003). We have however not developed all the material recommended by Ahumada (2003) as informative material prior to the workshop, (e.g. a SWOT analysis) due to a wish only to produce material to the participants which we found useful...

  13. Mars exploration study workshop 2

    Duke, Michael B.; Budden, Nancy Ann

    1993-11-01

    A year-long NASA-wide study effort has led to the development of an innovative strategy for the human exploration of Mars. The latest Mars Exploration Study Workshop 2 advanced a design reference mission (DRM) that significantly reduces the perceived high costs, complex infrastructure, and long schedules associated with previous Mars scenarios. This surface-oriented philosophy emphasizes the development of high-leveraging surface technologies in lieu of concentrating exclusively on space transportation technologies and development strategies. As a result of the DRM's balanced approach to mission and crew risk, element commonality, and technology development, human missions to Mars can be accomplished without the need for complex assembly operations in low-Earth orbit. This report, which summarizes the Mars Exploration Study Workshop held at the Ames Research Center on May 24-25, 1993, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues. The three position papers which were generated are included in section three of this publication.

  14. VIIth Blois Workshop summary: experimental

    Albrow, M.G.

    1997-10-01

    The Blois Workshop has become a conference not just restricted to diffractive scattering, but including topics such as searches for SUSY and Higgs, measurements of the top mass and b-decays. I will mention these briefly but will mostly discuss new results (and needed future measurements) in hard diffraction at HERA and the Tevatron

  15. PERT and CPM: Workshop Material.

    Burroughs Corp., Detroit, MI.

    This is a workbook containing problems in PERT (program evaluation review technique). It is intended to be used in a workshop or classroom to train management personnel in the basic methodology and capability of PERT. This material is not adequate in depth to create an expert in these techniques, but it is felt that the material is adequate to…

  16. Evaluating a poetry workshop in medical education.

    Collett, T J; McLachlan, J C

    2006-06-01

    This study aimed at evaluating how doing poetry could affect students' understanding of medical practice and at assessing the effectiveness of the evaluation method used. Qualitative research was carried out on the experiences of medical students participating in a poetry workshop, followed by some quantitative analysis. The study was conducted at Peninsula Medical School and St Ives, Cornwall, UK, with three medical students, a poet and a pathologist as participants. Data were collected by interviews, observation and web access. "Doing poetry" with a professional poet was found to assist communication between doctors and patients as it enhanced skills of observation, heightened awareness of the effect of language and fostered deep reflection. Poetry was also found to offer an outlet for medics and patients. The voluntary workshop attracted three participants; however, it might have had an effect on the wider student community because the poetry website received 493 hits in four months. Qualitative methods worked well as a tool for evaluation. "Doing poetry for poetry's sake" seemed to foster the development of skills related to empathy. The opportunity to do poetry should be made available to medical students as part of a wider arts and humanities programme.

  17. Dreissenid mussel research priorities workshop

    Sytsma, Mark; Phillips, Stephen; Counihan, Timothy D.

    2015-01-01

    Currently, dreissenid mussels have yet to be detected in the northwestern part of the United States and western Canada. Infestation of one of the jurisdictions within the mussel-free Pacific Northwest would likely have significant economic, soci­etal and environmental implications for the entire region. Understanding the biology and environmental tolerances of dreissenid mussels, and effectiveness of various man­agement strategies, is key to prevention.On November 4-5, 2015, the Aquatic Bioinvasion Research and Policy Institute and the Center for Lakes and Reservoirs at Portland State University, the US Geological Survey, and the Pacific States Marine Fisheries Commission, convened a Dreissenid Mussel Research Priorities Workshop funded by the Great Northern Landscape Conservation Cooperative. The purpose of the workshop was to review dreissenid research priorities in the 2010 Quagga-Zebra Mussel Action Plan for Western U.S. Waters, reassess those priorities, incorporate new information and emerging trends, and develop priorities to strategically focus research efforts on zebra and quagga mussels in the Pacific Northwest and ensure that future research is focused on the highest priorities. It is important to note that there is some repetition among dreissenid research priority categories (e.g., prevention, detection, control, monitoring, and biology).Workshop participants with research experience in dreissenid mussel biology and management were identified by a literature review. State and federal agency managers were also invited to the workshop to ensure relevancy and practicality of the work­shop outcomes. A total of 28 experts (see sidebar) in mussel biology, ecology, and management attended the workshop.

  18. After the Workshop: A Case Study of Post-Workshop Implementation of Active Learning in an Electrical Engineering Course

    Shekhar, Prateek; Maura Borrego

    2017-01-01

    Engineering education research has empirically validated the effectiveness of active learning over traditional instructional methods. However, the dissemination of education research into instructional practice has been slow. Faculty workshops for current and future instructors offer a solution to promote the widespread adoption of active learning…

  19. An Estimation Method for number of carrier frequency

    Xiong Peng

    2015-01-01

    Full Text Available This paper proposes a method that utilizes AR model power spectrum estimation based on Burg algorithm to estimate the number of carrier frequency in single pulse. In the modern electronic and information warfare, the pulse signal form of radar is complex and changeable, among which single pulse with multi-carrier frequencies is the most typical one, such as the frequency shift keying (FSK signal, the frequency shift keying with linear frequency (FSK-LFM hybrid modulation signal and the frequency shift keying with bi-phase shift keying (FSK-BPSK hybrid modulation signal. In view of this kind of single pulse which has multi-carrier frequencies, this paper adopts a method which transforms the complex signal into AR model, then takes power spectrum based on Burg algorithm to show the effect. Experimental results show that the estimation method still can determine the number of carrier frequencies accurately even when the signal noise ratio (SNR is very low.

  20. The 13th International Workshop on Targetry and Target Chemistry Proceedings

    Haroun, Samar; Givskov, Alex David; Jensen, Mikael

    in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal......This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risø National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production...... of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring...

  1. Results from two workshops: Developing and amending regulations and funding state radiation control programs

    Parker, G.

    1993-09-01

    The first section of this document presents the results of a technical workshop on the process of regulations development and amendment sponsored by the Nuclear Regulatory Commission (NRC). This workshop focused on methods for reducing the time it takes to promulgate regulations to help those States that are having difficulty meeting the three-year deadline for adopting new NRC regulations. Workshop participants responded to six questions, reviewed the procedures used by various States for revising and adopting changes to their regulations, and reviewed the time-flow charts used by various States. This workshop was designed to provide guidance to States that are promulgating and revising regulations. The second section of this document summarizes the proceedings of a technical workshop, also sponsored by the NRC, on funding radiation control programs that emphasized fee schedules and effective strategies for the 1990s. This workshop focused on determining the true costs of running a program, on setting realistic fees for the various categories of licenses, and on the most efficient methods for sending invoices, recording receipts, depositing money received, and issuing licenses. Workshop participants responded to seven questions; reviewed the methods various States use to determine true costs; reviewed the procedure that the various States use to produce invoices and licenses; reviewed the procedures that the States are required to abide by when they receive money; and reviewed the method used by the NRC to determine the cost of its various programs

  2. 2007 Lunar Regolith Simulant Workshop Overview

    McLemore, Carole A.; Fikes, John C.; Howell, Joe T.

    2007-01-01

    The National Aeronautics and Space Administration (NASA) vision has as a cornerstone, the establishment of an Outpost on the Moon. This Lunar Outpost will eventually provide the necessary planning, technology development, and training for a manned mission to Mars in the future. As part of the overall activity, NASA is conducting Earth-based research and advancing technologies to a Technology Readiness Level (TRL) 6 maturity under the Exploration Technology Development Program that will be incorporated into the Constellation Project as well as other projects. All aspects of the Lunar environment, including the Lunar regolith and its properties, are important in understanding the long-term impacts to hardware, scientific instruments, and humans prior to returning to the Moon and living on the Moon. With the goal of reducing risk to humans and hardware and increasing mission success on the Lunar surface, it is vital that terrestrial investigations including both development and verification testing have access to Lunar-like environments. The Marshall Space Flight Center (MSFC) is supporting this endeavor by developing, characterizing, and producing Lunar simulants in addition to analyzing existing simulants for appropriate applications. A Lunar Regolith Simulant Workshop was conducted by MSFC in Huntsville, Alabama, in October 2007. The purpose of the Workshop was to bring together simulant developers, simulant users, and program and project managers from ETDP and Constellation with the goals of understanding users' simulant needs and their applications. A status of current simulant developments such as the JSC-1A (Mare Type Simulant) and the NASA/U.S. Geological Survey Lunar Highlands-Type Pilot Simulant (NU-LHT-1 M) was provided. The method for evaluating simulants, performed via Figures of Merit (FoMs) algorithms, was presented and a demonstration was provided. The four FoM properties currently being assessed are: size, shape, density, and composition. Some of the

  3. Digital mapping techniques '06 - Workshop proceedings

    Soller, David R.

    2007-01-01

    The Digital Mapping Techniques `06 (DMT`06) workshop was attended by more than 110 technical experts from 51 agencies, universities, and private companies, including representatives from 27 state geological surveys (see Appendix A of these Proceedings). This workshop was similar in nature to the previous nine meetings, which were held in Lawrence, Kansas (Soller, 1997), Champaign, Illinois (Soller, 1998), Madison, Wisconsin (Soller, 1999), Lexington, Kentucky (Soller, 2000), Tuscaloosa, Alabama (Soller, 2001), Salt Lake City, Utah (Soller, 2002), Millersville, Pennsylvania (Soller, 2003), Portland, Oregon (Soller, 2004), and Baton Rouge, Louisiana (Soller, 2005). This year?s meeting was hosted by the Ohio Geological Survey, from June 11-14, 2006, on the Ohio State University campus in Columbus, Ohio. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops.Each DMT workshop has been coordinated by the Association of American State Geologists (AASG) and U.S. Geological Survey (USGS) Data Capture Working Group, the latter of which was formed in August 1996 to support the AASG and the USGS in their effort to build a National Geologic Map Database (see Soller, this volume, and http://ngmdb.usgs.gov/info/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed for the database - and for the State and Federal geological surveys - to provide more high-quality digital maps to the public.At the 2006 meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, "publishing" includes Web-based release); 2) field data

  4. Impact of an Oral Health Education Workshop on Parents’ Oral Health Knowledge, Attitude, and Perceived Behavioral Control among African Immigrants

    Maryam Amin; Pawan Nyachhyon; Maryam Elyasi; Muhammed Al-Nuaimi

    2014-01-01

    Purpose. To evaluate the impact of an educational workshop on parental knowledge, attitude, and perceived behavioral control regarding their child’s oral health. Materials and Methods. A one-time oral health education workshop including audio/visual and hands-on components was conducted by a trained dentist and bilingual community workers in community locations. Participants were African parents of children who had lived in Canada for less than ten years. The impact of the workshop was evalua...

  5. Effectiveness of a 1-day workshop on scientific writing conducted by the Indian journal of rheumatology

    Mohit Goyal

    2018-01-01

    Full Text Available Background: Writing a scientific manuscript is an important skill to acquire for junior doctors considering the mandatory requirement of research publications during post-graduate training and for career advancement in India. Methods: We conducted a one-day workshop on scientific writing and publication at Udaipur in November 2017, comprising both didactic lectures as well as hands-on evaluation of a dummy manuscript, and evaluated structured questionnaires filled pre- and post-workshop. Results: There were 120 attendees, most of whom were junior doctors with little or no prior experience in writing a scientific paper. A significant baseline knowledge deficit regarding the principles and processes of scientific writing (ranging from 20.9% to 77.3% participants for the different questions asked could be identified before the workshop. This knowledge deficit was significantly improved in most areas as assessed after the workshop. We identified the need to discuss predatory publishing in greater detail in subsequent workshops, as 20.8% of respondents after the workshop professed that they might consider publishing in a predatory journal. As expressed in participant feedback, longer, more-specialized or advanced level workshops on scientific writing in the future could also consider including more details on appropriate statistical presentation and pictorial representation of data as well as longer time spent on hands-on exercises. Conclusion: There remains a need to conduct more scientific writing workshops by national societies and journals all over the country.

  6. Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

    Erin B. Jensen

    2016-11-01

    Full Text Available Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students preferred the online writing workshop because of the convenience of the workshop and being able to post anonymous reviews. Students whom preferred the traditional in-person writing workshop liked being able to talk with their peers about their papers. This research article focuses on the students’ responses and experiences with traditional and online peer-reviews.

  7. Genetic Engineering Workshop Report, 2010

    Allen, J; Slezak, T

    2010-11-03

    The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of

  8. Standoff Acoustic Shear Wave Imaging Using LFM Chirps

    2011-03-21

    1 ( ) s s s s s s s s i i x y t t c t x x y t x x y t R t x y x y y t x y y t x y t x y tRx y t t c t c t c t x x y t t x y x c t...4 ( , , ) 2 ( , , )1( , , ) . 2 i i i i i i i i x y t t c t x x y t x x y t R t x y x y y t x y y t x y t x y tRx y t t c t c t c t

  9. Summary from the epistemic uncertainty workshop: consensus amid diversity

    Ferson, Scott; Joslyn, Cliff A.; Helton, Jon C.; Oberkampf, William L.; Sentz, Kari

    2004-01-01

    The 'Epistemic Uncertainty Workshop' sponsored by Sandia National Laboratories was held in Albuquerque, New Mexico, on 6-7 August 2002. The workshop was organized around a set of Challenge Problems involving both epistemic and aleatory uncertainty that the workshop participants were invited to solve and discuss. This concluding article in a special issue of Reliability Engineering and System Safety based on the workshop discusses the intent of the Challenge Problems, summarizes some discussions from the workshop, and provides a technical comparison among the papers in this special issue. The Challenge Problems were computationally simple models that were intended as vehicles for the illustration and comparison of conceptual and numerical techniques for use in analyses that involve: (i) epistemic uncertainty, (ii) aggregation of multiple characterizations of epistemic uncertainty, (iii) combination of epistemic and aleatory uncertainty, and (iv) models with repeated parameters. There was considerable diversity of opinion at the workshop about both methods and fundamental issues, and yet substantial consensus about what the answers to the problems were, and even about how each of the four issues should be addressed. Among the technical approaches advanced were probability theory, Dempster-Shafer evidence theory, random sets, sets of probability measures, imprecise coherent probabilities, coherent lower previsions, probability boxes, possibility theory, fuzzy sets, joint distribution tableaux, polynomial chaos expansions, and info-gap models. Although some participants maintained that a purely probabilistic approach is fully capable of accounting for all forms of uncertainty, most agreed that the treatment of epistemic uncertainty introduces important considerations and that the issues underlying the Challenge Problems are legitimate and significant. Topics identified as meriting additional research include elicitation of uncertainty representations, aggregation of

  10. 77 FR 14814 - Tobacco Product Analysis; Scientific Workshop; Request for Comments

    2012-03-13

    ....g., when running samples). The scientific workshop will include discussion of analytical methods for... products would be beneficial. B. Discuss the types and blends of tobacco used in reference products. What...

  11. Clean technologies: methods for minimizing the releases and choice of the effluents valorization processes. Application to metal workshops; Technologies propres: methodes de minimisation des rejets et de choix des procedes de valorisation des effluents. Application aux ateliers de traitement de surface

    Laforest, V.

    1999-12-10

    Currently, the essential part of the money invested by the industrialist is for the water treatment. In France, most of the 20 billions francs per year devoted to the water treatment is used for the industrial activity. The global management of effluents favour the integration of clean technologies (optimization, change and modification of the production process) in order to reduce the pollution problem at its source. Our study aims at the introduction of clean technologies in the metal workshops (consumer and generator of water and chemicals) by the development of two data management methods, which lead to two decision support systems. The aim of the first one is to minimize both the water consumption and the wastewater disposal by optimizing the production process (optimum yield and efficiency of the rinsing baths). The second one concerns the choice of valorization techniques considering the valorization objectives, the effluents characteristics and the parameters limiting the use of the techniques. Our approach fits into a global management method for the metal finishing industry wastewater. Its aim is to limit the quantity of wastewater generated, to valorize effluents and by this way to develop the clean technologies.

  12. Summary of the ECLOUD'04 Workshop

    Macek, R.; Furman, M.

    2004-01-01

    The 31st ICFA Advanced Beam Dynamics Workshop on Electron-Cloud Effects ''ECLOUD'04'' was held April 19-23, 2004 at Napa, CA, USA. A broad range of current topics in this field were illuminated by 53 talks in 7 sessions plus 6 session summaries at the final summary session. These covered a variety of experimental methods and results, along with progress on understanding of the topic obtained from simulations and analytic theory, and evaluations of the effectiveness of various methods/mechanisms for mitigation of the adverse impact on accelerator performance. In addition, a panel discussion was held on ''Future Needs and Future Directions''. A summary of progress on the major themes covered at ECLOUD'04 is presented

  13. 2015 MICCAI Workshop on Computational Diffusion MRI

    Ghosh, Aurobrata; Kaden, Enrico; Rathi, Yogesh; Reisert, Marco

    2016-01-01

    These Proceedings of the 2015 MICCAI Workshop “Computational Diffusion MRI” offer a snapshot of the current state of the art on a broad range of topics within the highly active and growing field of diffusion MRI. The topics vary from fundamental theoretical work on mathematical modeling, to the development and evaluation of robust algorithms, new computational methods applied to diffusion magnetic resonance imaging data, and applications in neuroscientific studies and clinical practice. Over the last decade interest in diffusion MRI has exploded. The technique provides unique insights into the microstructure of living tissue and enables in-vivo connectivity mapping of the brain. Computational techniques are key to the continued success and development of diffusion MRI and to its widespread transfer into clinical practice. New processing methods are essential for addressing issues at each stage of the diffusion MRI pipeline: acquisition, reconstruction, modeling and model fitting, image processing, fiber t...

  14. Workshop 93. Part C

    1995-01-01

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.)

  15. Workshop 93. Part C

    NONE

    1996-12-31

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.).

  16. Workshop: Welcoming speech

    Lummerzheim, D.

    1994-01-01

    The welcoming speech underlines the fact that any validation process starting with calculation methods and ending with studies on the long-term behaviour of a repository system can only be effected through laboratory, field and natural-analogue studies. The use of natural analogues (NA) is to secure the biosphere and to verify whether this safety really exists. (HP) [de

  17. Workshop 92. Part B

    1992-01-01

    Out of 104 short communications contained in the proceedings, 25 items were inputted to INIS. The topics covered include nuclear methods of chemical analysis, plasma diagnostics, quantum physics, radiation detection, radiation dosimetry, reactor safety, radionuclide kinetics, X-ray and neutron diffraction studies of steels and other solids, etc. (Z.S.)

  18. Women's labour and economic globalisation: a participatory workshop created by Alternative Women in Development (Alt-WID).

    Barton, C; Nazombei, E

    2000-03-01

    This article describes the aims, methods, materials and topics used in a participatory workshop created by Alternative Women in Development. The organization aims to bridge the gaps in analyzing human rights and economic justice in both North and South from a feminist perspective through a workshop. This workshop considers the varied roles that women play in the global economy and features a series of anecdotes to illustrate the diverse ways in which globalization affects women in all regions worldwide. The workshop runs for a minimum of 3 hours and is structured as follows: introduction; plenary: identifying the human rights of the women; small-group work, plenary: building a group analysis and discussion of alternatives to the existing policies; and individual and plenary evaluations. Furthermore, four anecdotes used at the workshop are presented. Among the outcomes of the workshop included the identification of the problem causes and development of strategies for action.

  19. Second Workshop on Mechatronic Systems

    Choley, Jean-Yves; Chaari, Fakher; Jarraya, Abdessalem; Haddar, Mohamed

    2014-01-01

    The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.

  20. Beam instability Workshop - plenary sessions

    2001-01-01

    The purpose of this workshop was to provide a review of the mechanisms of limiting beam instabilities, their cures, including feedback, and beam measurement for synchrotron radiation light sources. 12 plenary sessions took place whose titles are: 1) challenging brilliance and lifetime issues with increasing currents; 2) limiting instabilities in multibunch; 3) experience from high currents in B factories; 4) longitudinal dynamics in high intensity/bunch; 5) Transverse instabilities for high intensity/bunch; 6) working group introduction from ESRF experience; 7) impedance modelling: simulations, minimization; 8) report on the broadband impedance measurements and modelling workshop; 9) feedback systems for synchrotron light sources; 10) beam instabilities diagnostics; 11) harmonic cavities: the pros and cons; and 12) experimental study of fast beam-ion instabilities at PLS. This document gathers the 12 articles that were presented during these sessions

  1. Proton storage ring summer workshop

    Lawrence, G.P.; Cooper, R.K.

    1977-10-01

    During the week of August 16, 1976 a Workshop was held at the Los Alamos Scientific Laboratory (LASL) on the Proton Storage Ring (PSR) for the Weapons Neutron Research Facility (WNRF). Written contributions were solicited from each of the participants in the Workshop, and the contributions that were received are presented. The papers do not represent polished or necessarily complete work, but rather represent ''first cuts'' at their respective areas. Topics covered include: (1) background information on the storage ring; (2) WNRF design; (3) rf transient during filling; (4) rf capture; (5) beam bunch compression; (6) transverse space charge limits; (7) transverse resistive instability in the PSR; (8) longitudinal resistive instability; (9) synchrotron frequency splitting; (10) E Quintus Unum--off resonance; (11) first harmonic bunching in the storage ring; (12) kicker considerations; (13) beam extraction; (14) ferrite kicker magnets; and (15) E Quintus Unum: a possible ejection scheme

  2. Beam instability Workshop - plenary sessions

    NONE

    2001-07-01

    The purpose of this workshop was to provide a review of the mechanisms of limiting beam instabilities, their cures, including feedback, and beam measurement for synchrotron radiation light sources. 12 plenary sessions took place whose titles are: 1) challenging brilliance and lifetime issues with increasing currents; 2) limiting instabilities in multibunch; 3) experience from high currents in B factories; 4) longitudinal dynamics in high intensity/bunch; 5) Transverse instabilities for high intensity/bunch; 6) working group introduction from ESRF experience; 7) impedance modelling: simulations, minimization; 8) report on the broadband impedance measurements and modelling workshop; 9) feedback systems for synchrotron light sources; 10) beam instabilities diagnostics; 11) harmonic cavities: the pros and cons; and 12) experimental study of fast beam-ion instabilities at PLS. This document gathers the 12 articles that were presented during these sessions.

  3. Summary of longitudinal instabilities workshop

    Chasman, R.

    1976-01-01

    A five-day ISABELLE workshop on longitudinal instabilities was held at Brookhaven, August 9-13, 1976. About a dozen outside accelerator experts, both from Europe and the U.S.A., joined the local staff for discussions of longitudinal instabilities in ISABELLE. An agenda of talks was scheduled for the first day of the workshop. Later during the week, a presentation was given on the subject ''A more rigorous treatment of Landau damping in longitudinal beam instabilities''. A few progress meetings were held in which disagreements regarding calculations of coupling impedances were clarified. A summary session was held on the last day. Heavy emphasis was put on single bunched beam instabilities in the microwave region extending above the cut-off frequency of the ISABELLE vacuum chamber.

  4. Universal Interconnection Technology Workshop Proceedings

    Sheaffer, P.; Lemar, P.; Honton, E. J.; Kime, E.; Friedman, N. R.; Kroposki, B.; Galdo, J.

    2002-10-01

    The Universal Interconnection Technology (UIT) Workshop - sponsored by the U.S. Department of Energy, Distributed Energy and Electric Reliability (DEER) Program, and Distribution and Interconnection R&D - was held July 25-26, 2002, in Chicago, Ill., to: (1) Examine the need for a modular universal interconnection technology; (2) Identify UIT functional and technical requirements; (3) Assess the feasibility of and potential roadblocks to UIT; (4) Create an action plan for UIT development. These proceedings begin with an overview of the workshop. The body of the proceedings provides a series of industry representative-prepared papers on UIT functions and features, present interconnection technology, approaches to modularization and expandability, and technical issues in UIT development as well as detailed summaries of group discussions. Presentations, a list of participants, a copy of the agenda, and contact information are provided in the appendices of this document.

  5. Nuclear thermal propulsion workshop overview

    Clark, J.S.

    1991-01-01

    NASA is planning an Exploration Technology Program as part of the Space Exploration Initiative to return U.S. astronauts to the moon, conduct intensive robotic exploration of the moon and Mars, and to conduct a piloted mission to Mars by 2019. Nuclear Propulsion is one of the key technology thrust for the human mission to Mars. The workshop addresses NTP (Nuclear Thermal Rocket) technologies with purpose to: assess the state-of-the-art of nuclear propulsion concepts; assess the potential benefits of the concepts for the mission to Mars; identify critical, enabling technologies; lay-out (first order) technology development plans including facility requirements; and estimate the cost of developing these technologies to flight-ready status. The output from the workshop will serve as a data base for nuclear propulsion project planning

  6. Heat pipe applications workshop report

    Ranken, W.A.

    1978-04-01

    The proceedings of the Heat Pipe Applications Workshop, held at the Los Alamos Scientific Laboratory October 20-21, 1977, are reported. This workshop, which brought together representatives of the Department of Energy and of a dozen industrial organizations actively engaged in the development and marketing of heat pipe equipment, was convened for the purpose of defining ways of accelerating the development and application of heat pipe technology. Recommendations from the three study groups formed by the participants are presented. These deal with such subjects as: (1) the problem encountered in obtaining support for the development of broadly applicable technologies, (2) the need for applications studies, (3) the establishment of a heat pipe technology center of excellence, (4) the role the Department of Energy might take with regard to heat pipe development and application, and (5) coordination of heat pipe industry efforts to raise the general level of understanding and acceptance of heat pipe solutions to heat control and transfer problems

  7. Workshop Results: Teaching Geoscience to K-12 Teachers

    Nahm, A.; Villalobos, J. I.; White, J.; Smith-Konter, B. R.

    2012-12-01

    A workshop for high school and middle school Earth and Space Science (ESS) teachers was held this summer (2012) as part of an ongoing collaboration between the University of Texas at El Paso (UTEP) and El Paso Community College (EPCC) Departments of Geological Sciences. This collaborative effort aims to build local Earth science literacy and educational support for the geosciences. Sixteen teachers from three school districts from El Paso and southern New Mexico area participated in the workshop, consisting of middle school, high school, early college high school, and dual credit faculty. The majority of the teachers had little to no experience teaching geoscience, thus this workshop provided an introduction to basic geologic concepts to teachers with broad backgrounds, which will result in the introduction of geoscience to many new students each year. The workshop's goal was to provide hands-on activities illustrating basic geologic and scientific concepts currently used in introductory geology labs/lectures at both EPCC and UTEP to help engage pre-college students. Activities chosen for the workshop were an introduction to Google Earth for use in the classroom, relative age dating and stratigraphy using volcanoes, plate tectonics utilizing the jigsaw pedagogy, and the scientific method as a think-pair-share activity. All activities where designed to be low cost and materials were provided for instructors to take back to their institutions. A list of online resources for teaching materials was also distributed. Before each activity, a short pre-test was given to the participants to gauge their level of knowledge on the subjects. At the end of the workshop, participants were given a post-test, which tested the knowledge gain made by participating in the workshop. In all cases, more correct answers were chosen in the post-test than the individual activity pre-tests, indicating that knowledge of the subjects was gained. The participants enjoyed participating in these

  8. Measuring What Matters Workshop Report

    2015-01-14

    Measuring What Matters Workshop Report Katie Stewart Julia Allen Michelle Valdez Lisa Young January 2015 TECHNICAL NOTE CMU/SEI-2015-TN...the approach using a simple objective: teaching a child to properly brush his/her teeth. Next, we demonstrate the approach using a cybersecurity...Ensure you child’s teeth are healthy. G1: Ensure your child has everything needed to brush his/her teeth. G2: Ensure your child is brushing his

  9. National Hydrogen Roadmap Workshop Proceedings

    None

    2002-04-01

    This document summarizes the presentations and suggestions put forth by officials, industry experts and policymakers in their efforts to come together to develop a roadmap for America''s clean energy future and outline the key barriers and needs to achieve the hydrogen vision. The National Hydrogen Roadmap Workshop was held April 2-3, 2002. These proceedings were compiled into a formal report, The National Hydrogen Energy Roadmap, which is also available online.

  10. Trusted Silicon Stratus (TSS) Workshop

    2011-02-01

    business case for a proposed Infrastructure-as-a- Service (IaaS)/ Software -as-a- Service ( SaaS ) cloud architecture. User desires for innovative pricing and...Public Physically Unclonable Function PUF Physically Unclonable Function SaaS Software -as-a- Service SIP Semiconductor Intellectual Property SNL...WORKSHOP NIMBIS SERVICES INCORPORATED FEBRUARY 2011 FINAL TECHNICAL REPORT  ROME, NY 13441 UNITED STATES AIR FORCE  AIR FORCE

  11. Streaming Visual Analytics Workshop Report

    Cook, Kristin A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burtner, Edwin R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kritzstein, Brian P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Brisbois, Brooke R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mitson, Anna E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-31

    How can we best enable users to understand complex emerging events and make appropriate assessments from streaming data? This was the central question addressed at a three-day workshop on streaming visual analytics. This workshop was organized by Pacific Northwest National Laboratory for a government sponsor. It brought together forty researchers and subject matter experts from government, industry, and academia. This report summarizes the outcomes from that workshop. It describes elements of the vision for a streaming visual analytic environment and set of important research directions needed to achieve this vision. Streaming data analysis is in many ways the analysis and understanding of change. However, current visual analytics systems usually focus on static data collections, meaning that dynamically changing conditions are not appropriately addressed. The envisioned mixed-initiative streaming visual analytics environment creates a collaboration between the analyst and the system to support the analysis process. It raises the level of discourse from low-level data records to higher-level concepts. The system supports the analyst’s rapid orientation and reorientation as situations change. It provides an environment to support the analyst’s critical thinking. It infers tasks and interests based on the analyst’s interactions. The system works as both an assistant and a devil’s advocate, finding relevant data and alerts as well as considering alternative hypotheses. Finally, the system supports sharing of findings with others. Making such an environment a reality requires research in several areas. The workshop discussions focused on four broad areas: support for critical thinking, visual representation of change, mixed-initiative analysis, and the use of narratives for analysis and communication.

  12. Report of workshop on energy

    Tsujimoto, Kazufumi; Nagai, Yasuki

    2005-03-01

    The Working Group on Energy (WG) was organized under International Union of Pure and Applied Physics (IUPAP). The WG has been considering problems on future energy supply and role of physics to solve the subjects. As one of activities of the WG, a Workshop on Energy was held on May 13, 2004 at Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute (JAERI) in Tokyo hosted by IUPAP and co-hosted by JAERI and High Energy Accelerator Research Organization. The objectives of this workshop are to suggest active contributions of pure and applied physics field to the solution of the energy problem and to advance research and development (R and D) of future energy through the discussions about present status, problem and prospect of different energy development in the world and in Japan. This report records the summary of the Workshop and, abstracts and materials of 12 presentations. After the invited presentations about overview of energy problems in the world, in China and in Japan, R and D activities on the following four fields were presented; 'Research and Development of New Energy', 'Research and Development of Fusion', 'Prospect of Accelerator Driven System (ADS)', and 'Hydrogen Production, Storage and Transportation'. At the end of the workshop, possible role of physics for the current and future energy problem was discussed. It was recognized that the energy problem was not as simple as to be solved by one country, and hence the international collaboration became essential. The importance of the coordination with other fields, such as chemistry and material, was also emphasized. (author)

  13. Proceedings of the TOUGH workshop

    Pruess, K. [ed.

    1990-09-01

    A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs.

  14. Proceedings of the TOUGH workshop

    Pruess, K.

    1990-09-01

    A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs

  15. Workshop on crystals and focusing

    Berreman, D. W.

    1980-12-01

    The purpose of the workshop on crystals and focusing was to exchange and pool the experience and information that the participants could contribute on the design and construction of monochromators for EXAFS with optimum speed, resolution and versatility. The panel was chaired by D.W. Berreman of BTL and included G. G. Cohen of NBS, S. Heald of Brookhaven National Labs and Lu Kun-quan of U. of Washington. Written contributions for the workshop were made by R. J. Emrich and J. R. Katzer of U. of Delaware, R. C. Gamble of Cal. Tech., J. Crane of Cal. Tech., and T. Matsushita of S. S. R. L. G. Bunker of U. of Washington was recording secretary, G. G. Cohen and S. Heald gave invited papers on the main program that were relevant to the workshop. Other contributors were R. Hänsel of U. of Kiel, W. Germany, G. Christoff of Ohio State and D. Hempstead of Rigaku/USA Inc., J. Holben of Marconi Avionics, Hertfordshire, England and J. Hastings of Brookhaven N. L.

  16. Summary and report on four national environmental workshops

    House, Peter W.

    1980-07-01

    Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

  17. Connecting with the Arts: A Workshop for Middle Grades Teachers

    Annenberg Media, 2005

    2005-01-01

    "Connecting with the Arts: A Workshop for Middle Grades Teachers" is a video workshop for middle school teachers of the arts and other subjects. The workshop includes eight hour-long video programs and a companion workshop guide and Web site. The workshop shows middle school teachers why and how to integrate the arts (dance, music, theatre, and…

  18. Iterative Prototyping of Strategy Implementation Workshop Design

    Kryger, Anders

    2018-01-01

    Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

  19. NKS Workshop on Radioanalytical Chemistry - Final report

    The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

  20. 1998 federal technical standards workshop: Proceedings

    NONE

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  1. Workshop proceedings: "We are the Olifants" - Key stakeholder workshop for the Upper Olifants River study

    Funke, Nicola S

    2013-03-31

    Full Text Available Project Leader, Natural Resources and the Environment Council for Scientific and Industrial Research March 2013 Workshop Proceedings Page v EXECUTIVE SUMMARY The Upper Olifants Key Stakeholder Workshop took place at the CSIR Knowledge...

  2. Synchronization of workshops, using facilities planning

    Zineb, Britel; Abdelghani, Cherkaoui

    2017-08-01

    In this paper, we will present a methodology used for the synchronization of two workshops of a sheet metal department. These two workshops have a supplier-customer relationship. The aim of the study is to synchronise the two workshops as a step towards creating a better material flow, reduced inventory and achieving Just in time and lean production. To achieve this, we used a different set of techniques: SMED, Facilities planning…

  3. ISEE-magnetopause observations - workshop results

    Paschmann, G.

    1982-01-01

    A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

  4. The second international workshop on enterprise security

    Chang, V; Ramachandran, M; Yen, NN; Walters, RJ; Wills, G

    2016-01-01

    Welcome to our second international workshop on Enterprise Security as part of CloudCom 2015, Vancouver, Canada, November 30-December 3, 2015. The first international workshop held in Singapore has been a major success since then we have achieved greater team activities, research, and international collaborations as the major and significant outcome of our first workshop on this topic. Enterprise Security involves all business, products, governments, organization, and their contractors. This ...

  5. International Workshop on Linear Colliders 2010

    CERN. Geneva

    2010-01-01

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  6. Nuclear Energy Innovation Workshops. Executive Summary

    Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

  7. Report on the final BRACElet workshop

    Tony Clear

    Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.

  8. Cyanotype: Workshops for people with early dementia

    Moreno Sáez, María del Carmen; Gutiérrez-Párraga, Teresa; Saavedra Macías, Francisco Javier (Coordinador); Español Nogueiro, Alicia (Coordinador); Arias Sánchez, Samuel (Coordinador); Calderón García, Marina (Coordinador)

    2017-01-01

    The workshop "Cyanotype: Workshops for people with early dementia", carried out at the 5th International Conference on Health Humanities introduced the cyanotype. The cyanotype is a 19th century photographic technique that the research project used as a way for preventing the decline of faculties of people living with diseases that provoke memory loss. The activities carried out in the cyanotype workshop at the Conference were based on the creation of photographic images that could be interve...

  9. On the Cutting Edge Professional Development Program: Workshop and Web Resources for Current and Future Geoscience Faculty

    MacDonald, R.; Manduca, C. A.; Mogk, D. W.; Tewksbury, B. J.

    2004-12-01

    Recognizing that many college and university faculty receive little formal training in teaching, are largely unaware of advances in research on teaching and learning, and face a variety of challenges in advancing in academic careers, the National Science Foundation-funded program On the Cutting Edge provides professional development for current and future faculty in the geosciences at various stages in their careers. The program includes a series of six multi-day workshops, sessions and one-day workshops at professional meetings, and a website with information about workshop opportunities and a variety of resources that bring workshop content to faculty (http://serc.carleton.edu/NAGTWorkshops). The program helps faculty improve their teaching and their job satisfaction by providing resources on instructional methods, geoscience content, and strategies for career planning. Workshop and website resources address innovative and effective practices in teaching, course design, delivery of instructional materials, and career planning, as well as approaches for teaching particular topics and strategies for starting and maintaining a research program in various institutional settings. Each year, special workshops for graduate students and post-doctoral fellows interested in academic careers and for early career faculty complement offerings on course design and emerging topics that are open to the full geoscience community. These special workshops include sessions on topics such as dual careers, gender issues, family-work balance, interviewing and negotiating strategies. The workshops serve as opportunities for networking and community building, with participants building connections with other participants as well as workshop leaders. Workshop participants reflect the full range of institutional diversity as well as ethnic and racial diversity beyond that of the geoscience faculty workforce. More than 40 percent of the faculty participants are female. Of the faculty

  10. Proceedings of the Adaptive Sensor Array Processing Workshop (12th) Held in Lexington, MA on 16-18 March 2004 (CD-ROM)

    James, F

    2004-01-01

    ...: The twelfth annual workshop on Adaptive Sensor Array Processing presented a diverse agenda featuring new work on adaptive methods for communications, radar and sonar, algorithmic challenges posed...

  11. Workshop report on new directions in soft x-ray photoabsorption

    Bartlett, R.; Del Grande, N.K.; Lindau, I.; Manson, S.; Merts, A.L.; Pratt, R.

    1984-01-01

    The Workshop Report integrates what was said at the Workshop on New Directions in Soft X-Ray Photoabsorption, which focused on the region from 100 eV to 10 keV. The report clarifies the current state of theory and experiment and identifies the opportunities which new theoretical methods and experimental facilities could be expected to provide. The understanding of photoabsorption (which requires experimental photoabsorption cross section data) is a key to understanding the properties and behavior of atoms, molecules and solids. The Workshop participants were forty-three physicists and quantum chemists, from twenty-four institutions in four countries, all interested in photoabsorption from different perspectives

  12. 7th International k0-Users' Workshop

    Borut Smodis

    2018-01-01

    Complete text of publication follows. The k 0 method of neutron activation analysis (k 0 -NAA) has become a well-established analytical tool for elemental analysis of various samples since its introduction in mid-1970s. To strengthen its development, applications and use, a series of regular workshops dedicated to this particular analytical method has been introduced twenty-five years ago, held in Astene, Belgium (1992); Ljubljana, Slovenia (1996); Bruges, Belgium (2001); Funchal, Portugal (2005); Belo Horizonte, Brazil (2009) and Budapest, Hungary (2013). The 7th k 0 -Users' Workshop was held at Hotel Novotel Montreal Centre, Canada, 3-8 September 2017. The meeting was organized by Polytechnique Montreal in cooperation with the International Atomic Energy Agency. Twenty-seven participants from 16 different countries (Australia, Austria, Belgium, Brazil, Canada, Czech Republic, Egypt, Germany, Hungary, Italy, Jamaica, Peru, Slovenia, the Netherlands, Turkey, Vietnam) from all five continents discussed the latest developments and applications of k 0 -NAA. Thirty-three papers were presented in the following sessions: Fundamentals of k 0 -NAA, Nuclear Data, Neutron Flux Parameters, k 0 -NAA Methodology, Validation of k 0 -NAA, Facilities, Automatization, and k 0 -NAA Methodology and PGAA. The talks included presentations by two Keynote Speakers and one Honorary Speaker. During the workshop, scientific visits were paid to the SLOWPOKE NAA Laboratory and Thermal Hydraulics Laboratory of the Polytechnique Montreal. The upcoming 12 papers in this issue of the Journal of Radioanalytical and Nuclear Chemistry were selected to be published from the workshop. The next, 8th k 0 -Users' Workshop is expected to be held in Ljubljana, Slovenia in 2021.

  13. EVALUATION OF BASIC COURSE WORKSHOP CONDUCTED IN A MEDICAL COLLEGE

    Manasee Panda

    2017-08-01

    Full Text Available BACKGROUND Faculty development is perhaps one of the foremost issues among the factors influencing the quality of medical education. It was planned to evaluate Basic course workshop (BCW on Medical education Technologies (MET conducted in the institution with following objectives 1. To assess the effectiveness of the B CW in MET conducted in the Medical College. 2. To study the changes in teaching practices and assessment methods of faculties after the workshop. MATERIALS AND METHODS Present Evaluation study was conducted at the RTC (SCB Medical College, Odisha of MCI in MET from February 2012 to December 2012. Kirkpatrick’s model with four levels of program outcomes (reaction, learning, behaviour, and result was used to evaluate the effectiveness of workshop. Convenient sampling method was used. All the faculties in the first 4 batches of the workshop were the study participants. Data was collected from the record of the RTC from the filled in Feedback form, PrePst test forms, filled semi structured questionnaire from the participants, in-depth interview of facilitators and focus group discussion of students. Descriptive statistics like percentage, Proportions and Chi-square test used. RESULTS A total of 67 faculties responded to the questionnaire. There was gain in knowledge for majority of faculties in different teaching learning process and assessment methods due to the workshop. More than 90% of faculties had the attitude to practice interactive teaching, PBL and preparing MCQs and structured oral questions. Self-reported change in teaching behavior and assessment method was reported by more than 80% of the faculties. Reasons for non- implementation were given as the lack of support from the institution (64%, from other faculties (34%,lack of self-motivation(13%.Facilitators were satisfied with the quality of training. But FGD conducted for the students revealed that they failed to recognize noticeable change in the teaching and

  14. Diversity in Action workshop | 14 June | Business Center Technoparc

    2016-01-01

    After two years, five successful editions and plenty of positive feedback, we are happy to announce the 7th edition of our Diversity in Action workshop.   Tuesday 14 June 2016 – 8.30 a.m. - 12.30 p.m. Crêt Neige (Business Center Technoparc) Seize the opportunity and participate in this half-day interactive workshop designed to explore the meaning and importance of diversity at CERN. Using participative multi-media methods and study cases from the CERN work environment, this workshop will provide participants with insights into the different dimensions of diversity, help to develop greater sensitivity to differences, explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. “For me it was a great opportunity to talk about diversity issues with other people at CERN who I would have never met otherwise," says Alex Brown, who participated in the 3rd edition of the workshop. "The ...

  15. [Health education at the health workshops of Cahors: challenges].

    Théry, Céline

    2013-01-01

    There have been significant developments in health education over recent years. Focusing on France, the purpose of this paper is to examine the role of health education in reducing social inequalities based on the example of the Atelier santé ville de Cahors (Cahors Health Workshop). The paper addresses the following questions: What are the results and outcomes of the workshop? What kind of health education issues are at stake in the territorial approach to policy-making in an urban context? We examined the methods underlying the health education measures taken in the Cahors Health Workshop, which involve project-based approaches and the promotion of community health. Health education aimed at improving health is central to issues such as listening and speaking, the development of autonomy and the responsibilization of urban actors. Based on a rigorous methodology and the underlying values, health education in the Cahors Health Workshop places local residents, elected representatives and health professionals at the heart of the health care process (from the diagnostic process to the assessment process) and contributes to the reduction of social inequalities in health while facilitating access to information and health care. The goal of health education is to encourage individuals to be responsible for their own health in order to empower them to make informed choices adapted to the demands of their environment.

  16. Action research Toolkit II: The Scenario Workshop

    Rasmussen, Lauge Baungaard

    2003-01-01

    The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice.......The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice....

  17. 8th International Workshop on Simulation

    Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

    2018-01-01

    This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

  18. Summer 1994 Computational Science Workshop. Final report

    NONE

    1994-12-31

    This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

  19. 75 FR 58411 - Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments

    2010-09-24

    ...] Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments AGENCY: Food... Drug Administration (FDA) is announcing a public workshop entitled: ``Center for Veterinary Medicine... be emailed to all registrants. Contact Person: Charles Andres, Center for Veterinary Medicine (HFV...

  20. Contributions to the 4. reflectometry workshop

    Clairet, F

    1999-09-15

    This document contains ten papers presented during the 4. workshop on reflectometry. Those papers deal with the utility of reflectometry to plasma density fluctuations study or reflectometry based plasma diagnostics: X mode reflectometry on edge density profile measurements on Tore Supra; recent results of reflectometry on ASDEX-UPGRADE; automatic evaluation of density profiles with high temporal resolution; the TJ-II reflectometry system; doppler reflectometry for the investigation of poloidally propagating density perturbations; poloidal rotation measuremin Tore Supra by oblique reflectometry; pulsed radar reflectometry at TEXTOR-94; density profile reconstruction methods using dispersive effects in pulse radar reflectometry; fluctuation reflectometry: two dimensional full wave modelling; phase ramping and modulation of reflectometer signals. (A.L.B.)