WorldWideScience

Sample records for methods height weight

  1. Measurement of H'(0.07) with pulse height weighting integration method

    International Nuclear Information System (INIS)

    Liye, LIU; Gang, JIN; Jizeng, MA

    2002-01-01

    H'(0.07) is an important quantity for radiation field measurement in health physics. One of the plastic scintillator measurement methods is employing the weak current produced by PMT. However, there are some weaknesses in the current method. For instance: sensitive to environment humidity and temperature, non-linearity energy response. In order to increase the precision of H'(0.07) measurement, a Pulse Height Weighting Integration Method is introduced for its advantages: low noise, high sensitivity, data processable, wide measurement range. Pulse Height Weighting Integration Method seems to be acceptable to measure directional dose equivalent. The representative theoretical energy response of the pre-described method accords with the preliminary experiment result

  2. Weight and height prediction of immobilized patients

    OpenAIRE

    Rabito,Estela Iraci; Vannucchi,Gabriela Bergamini; Suen,Vivian Marques Miguel; Castilho Neto,Laércio Lopes; Marchini,Júlio Sérgio

    2006-01-01

    OBJECTIVE: To confirm the adequacy of the formula suggested in the literature and/or to develop appropriate equations for the Brazilian population of immobilized patients based on simple anthropometric measurements. METHODS: Hospitalized patients were submitted to anthropometry and methods to estimate weight and height of bedridden patients were developed by multiple linear regression. RESULTS: Three hundred sixty eight persons were evaluated at two hospital centers and five weight-predicting...

  3. Can height categories replace weight categories in striking martial arts competitions? A pilot study.

    Science.gov (United States)

    Dubnov-Raz, Gal; Mashiach-Arazi, Yael; Nouriel, Ariella; Raz, Raanan; Constantini, Naama W

    2015-09-29

    In most combat sports and martial arts, athletes compete within weight categories. Disordered eating behaviors and intentional pre-competition rapid weight loss are commonly seen in this population, attributed to weight categorization. We examined if height categories can be used as an alternative to weight categories for competition, in order to protect the health of athletes. Height and weight of 169 child and adolescent competitive karate athletes were measured. Participants were divided into eleven hypothetical weight categories of 5 kg increments, and eleven hypothetical height categories of 5 cm increments. We calculated the coefficient of variation of height and weight by each division method. We also calculated how many participants fit into corresponding categories of both height and weight, and how many would shift a category if divided by height. There was a high correlation between height and weight (r = 0.91, p<0.001). The mean range of heights seen within current weight categories was reduced by 83% when participants were divided by height. When allocating athletes by height categories, 74% of athletes would shift up or down one weight category at most, compared with the current categorization method. We conclude that dividing young karate athletes by height categories significantly reduced the range of heights of competitors within the category. Such categorization would not cause athletes to compete against much heavier opponents in most cases. Using height categories as a means to reduce eating disorders in combat sports should be further examined.

  4. Clinical longitudinal standards for height, weight, height velocity, weight velocity, and stages of puberty.

    Science.gov (United States)

    Tanner, J M; Whitehouse, R H

    1976-01-01

    New charts for height, weight, height velocity, and weight velocity are presented for clinical (as opposed to population survey) use. They are based on longitudinal-type growth curves, using the same data as in the British 1965 growth standards. In the velocity standards centiles are given for children who are early- and late-maturing as well as for those who mature at the average age (thus extending the use of the previous charts). Limits of normality for the age of occurrence of the adolescent growth spurt are given and also for the successive stages of penis, testes, and pubic hair development in boys, and for stages of breast and pubic hair development in girls. PMID:952550

  5. Agreement between estimated and measured heights and weights ...

    African Journals Online (AJOL)

    index (BMI = kg/m2) and require accurate recording of a patient's height and weight.1. In reality, however, patients often cannot stand up straight for accurate height measurement, or are unable to step on a scale. In such cases, height and weight values are often obtained from the patient or their relatives, who either do not ...

  6. Weighting of field heights for sharpness and noisiness

    Science.gov (United States)

    Keelan, Brian W.; Jin, Elaine W.

    2009-01-01

    Weighting of field heights is important in cases when a single numerical value needs to be calculated that characterizes an attribute's overall impact on perceived image quality. In this paper we report an observer study to derive the weighting of field heights for sharpness and noisiness. One-hundred-forty images were selected to represent a typical consumer photo space distribution. Fifty-three sample points were sampled per image, representing field heights of 0, 14, 32, 42, 51, 58, 71, 76, 86% and 100%. Six observers participated in this study. The field weights derived in this report include both: the effect of area versus field height (which is a purely objective, geometric factor); and the effect of the spatial distribution of image content that draws attention to or masks each of these image structure attributes. The results show that relative to the geometrical area weights, sharpness weights were skewed to lower field heights, because sharpness-critical subject matter was often positioned relatively near the center of an image. Conversely, because noise can be masked by signal, noisiness-critical content (such as blue skies, skin tones, walls, etc.) tended to occur farther from the center of an image, causing the weights to be skewed to higher field heights.

  7. Validity of self-reported weight and height: a cross-sectional study among Malaysian adolescents

    Directory of Open Access Journals (Sweden)

    C. C. Kee

    2017-06-01

    Full Text Available Abstract Background Self-reported weight and height are commonly used in lieu of direct measurements of weight and height in large epidemiological surveys due to inevitable constraints such as budget and human resource. However, the validity of self-reported weight and height, particularly among adolescents, needs to be verified as misreporting could lead to misclassification of body mass index and therefore overestimation or underestimation of the burden of BMI-related diseases. The objective of this study was to determine the validity of self-reported weight and height among Malaysian secondary school children. Methods Both self-reported and directly measured weight and height of a subgroup of 663 apparently healthy schoolchildren from the Malaysian Adolescent Health Risk Behaviour (MyAHRB survey 2013/2014 were analysed. Respondents were required to report their current body weight and height via a self-administrative questionnaire before they were measured by investigators. The validity of self-reported against directly measured weight and height was examined using intraclass correlation coefficient (ICC, the Bland-Altman plot and weighted Kappa statistics. Results There was very good intraclass correlation between self-reported and directly measured weight [r = 0.96, 95% confidence interval (CI: 0.93, 0.97] and height (r = 0.94, 95% CI: 0.90, 0.96. In addition the Bland-Altman plots indicated that the mean difference between self-reported and direct measurement was relatively small. The mean difference (self-reported minus direct measurements was, for boys: weight, −2.1 kg; height, −1.6 cm; BMI, −0.44 kg/m2 and girls: weight, −1.2 kg; height, −0.9 cm; BMI, −0.3 kg/m2. However, 95% limits of agreement were wide which indicated substantial discrepancies between self-reported and direct measurements method at the individual level. Nonetheless, the weighted Kappa statistics demonstrated a substantial agreement between BMI

  8. Development and evaluation of weight and height reference ...

    African Journals Online (AJOL)

    While international reference standard exists, it has been suggested that locally generated norms would be more realistic and appropriate, especially in adults where great variations in stature among nations exist. This study was undertaken to develop a table of reference standard for weight and height for young adults in

  9. Validity of self-reported weight and height: a cross-sectional study among Malaysian adolescents.

    Science.gov (United States)

    Kee, C C; Lim, K H; Sumarni, M G; Teh, C H; Chan, Y Y; Nuur Hafizah, M I; Cheah, Y K; Tee, E O; Ahmad Faudzi, Y; Amal Nasir, M

    2017-06-02

    Self-reported weight and height are commonly used in lieu of direct measurements of weight and height in large epidemiological surveys due to inevitable constraints such as budget and human resource. However, the validity of self-reported weight and height, particularly among adolescents, needs to be verified as misreporting could lead to misclassification of body mass index and therefore overestimation or underestimation of the burden of BMI-related diseases. The objective of this study was to determine the validity of self-reported weight and height among Malaysian secondary school children. Both self-reported and directly measured weight and height of a subgroup of 663 apparently healthy schoolchildren from the Malaysian Adolescent Health Risk Behaviour (MyAHRB) survey 2013/2014 were analysed. Respondents were required to report their current body weight and height via a self-administrative questionnaire before they were measured by investigators. The validity of self-reported against directly measured weight and height was examined using intraclass correlation coefficient (ICC), the Bland-Altman plot and weighted Kappa statistics. There was very good intraclass correlation between self-reported and directly measured weight [r = 0.96, 95% confidence interval (CI): 0.93, 0.97] and height (r = 0.94, 95% CI: 0.90, 0.96). In addition the Bland-Altman plots indicated that the mean difference between self-reported and direct measurement was relatively small. The mean difference (self-reported minus direct measurements) was, for boys: weight, -2.1 kg; height, -1.6 cm; BMI, -0.44 kg/m 2 and girls: weight, -1.2 kg; height, -0.9 cm; BMI, -0.3 kg/m 2 . However, 95% limits of agreement were wide which indicated substantial discrepancies between self-reported and direct measurements method at the individual level. Nonetheless, the weighted Kappa statistics demonstrated a substantial agreement between BMI status categorised based on self-reported weight and height

  10. Growth pattern and final height of very preterm vs. very low birth weight infants

    NARCIS (Netherlands)

    Hollanders, J.J.; Pal, S.M. van der; Dommelen, P. van; Rotteveel, J.; Finken, M.J.J.

    2017-01-01

    BackgroundBoth very preterm (VP; i.e., gestational age <32 weeks) and very low birth weight (VLBW; i.e., birth weight <1,500 g) are used as inclusion criteria by studies on preterm birth. We aimed to quantify the impact of these entities on postnatal growth until final height.MethodsSubjects born VP

  11. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. It can lower ... at www.hormone.org/Spanish . Proven Weight Loss Methods Fact Sheet www.hormone.org

  12. Secular trends in height and weight among children and adolescents of the Seychelles, 1956–2006

    Directory of Open Access Journals (Sweden)

    Romain Sarah

    2008-05-01

    Full Text Available Abstract Background Height of individuals has long been considered as a significant index of nutrition and health of a population; still, there is little information regarding the trends of height and weight among developing or transitional countries. We assessed the secular trends in height and weight in children of the Seychelles, a rapidly developing island state in the Indian Ocean (African region. Methods Height and weight were measured in all students of all schools in four selected school grades (kindergarten, 4th, 7th and 10th grades for the periods 1998–9 (6391 children and 2005–6 (8582 children. Data for 1956–7 was extracted from a previously published report. Results At age 15.5 years, boys/girls were on average 10/13 cm taller and 15/9 kg heavier in 2005–6 than in 1956–7. Height increased in boys/girls by 1.62/0.93 cm/decade between 1956–7 and 1998–9 and by 1.14/1.82 cm/decade between 1998–9 and 2005–6. For weight, the linear increase in boys/girls was 1.38/1.10 kg/decade between 1956–7 and 1998–9 and 2.21/2.50 kg/decade between 1998–9 and 2005–6. Overall, the relative increase in weight between 1956–7 and 2005–6 was 5-fold higher than the relative increase in height. Conclusion Height and weight increased markedly over time in children aged

  13. Height, weight, weight change and risk of breast cancer in Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Anelise Bezerra de Vasconcelos

    Full Text Available CONTEXT: The relationship between body size and breast cancer still remains controversial in considering menopausal status. OBJECTIVE: To evaluate the association of height, weight and weight changes with breast cancer in the city of Rio de Janeiro, Brazil. DESIGN: Case-control study. SETTING: National Cancer Institute (INCA, Rio de Janeiro, Brazil, and State University of Rio de Janeiro (UERJ. SAMPLE: 177 incident cases of invasive breast cancer admitted to the main hospital of INCA between May 1995 and February 1996, and 377 controls recruited from among female visitors to the same hospital. MAIN MEASUREMENTS: Height and weight were measured and information on maximum weight, weight at ages 18 and 30 years, and potential risk factors were ascertained by interview at the hospital. RESULTS: Height was not related to risk of breast cancer among both pre and postmenopausal women. Nevertheless, women in this study were shorter than in studies that have found a positive association. Premenopausal women in the upper quartile of recent body mass index (BMI and maximum BMI showed a reduced risk of breast cancer (P for trend <= 0.03. Weight loss between ages 18 and 30 years and from 18 years to present was also associated with breast cancer among premenopausal women. CONCLUSIONS: These findings may merely indicate the known association between leanness and breast cancer. Further studies should explore the role of weight loss on breast cancer risk.

  14. Height, weight, and education achievement in rural Peru.

    Science.gov (United States)

    Cueto, Santiago

    2005-06-01

    The education system in Peru and many other developing countries faces several challenges, including improving education achievement and increasing education enrollment in high school. It is clear from several indicators that rural students have lower education outcomes than do urban students. In this study we used cross-sectional and longitudinal analysis to determine the relationship between height-for-age z-scores (HAZ), weight-for-age z-scores (WAZ), body-mass index (BMI), and education outcomes. The sample was composed of students from 20 elementary public schools in two rural zones in Peru. The descriptive results show that there was no association between any of the anthropometric variables and achievement (mathematics and reading comprehension) or advancing to high school without repeating a grade. However, BMI was associated with dropping out of school: children with higher BMI in 1998 were more likely to be out of school by 2001. The hierarchical multivariate analysis also showed no relationship between anthropometry and achievement at the individual level, but students with relatively higher HAZ in 1998 were more likely to be drop-outs by 2001. These results contradict prior findings that showed a positive association between anthropometric variables (especially HAZ) and education achievement. The results might be explained by the fact that the study was carried out at very poor sites, at altitudes between 3000 and 3500 meters above sea level. The scarce studies about development in high altitudes suggest that the patterns for height and weight for children and adolescents are different than at sea level. Another possible explanation has to do with the fact that in the contexts studied, children who are perceived as relatively heavier (BMI) or taller (HAZ) might be expected to be out of school and start working (in fact, this was the primary reason given by children for dropping out of school).

  15. Correction Equations to Adjust Self-Reported Height and Weight for Obesity Estimates among College Students

    Science.gov (United States)

    Mozumdar, Arupendra; Liguori, Gary

    2011-01-01

    The purposes of this study were to generate correction equations for self-reported height and weight quartiles and to test the accuracy of the body mass index (BMI) classification based on corrected self-reported height and weight among 739 male and 434 female college students. The BMIqc (from height and weight quartile-specific, corrected…

  16. Correlation of Index Finger Length (2D with Height, Weight and BMI in Adult Bangladeshi Male

    Directory of Open Access Journals (Sweden)

    Karim Rezwan Hasan

    2017-05-01

    Full Text Available Background: Human hand is one of the most versatile parts of the human body which plays an important role in modern medical science and evolutionary biology. By virtue of evolution and genetic arrangements, digital lengths vary from person to person according to age, sex, races, occupation or even environmental influences. It has been found that the digital lengths and their ratios are not same in different sexes and even in both hands of same individual. Specially, index to ring digit lengths and their ratios which already have been proved to represent sexual dimorphism may differ in both hands of an individual and show positive correlations with other morphological attributes like height, weight and BMI. Objectives: To analyze the variation of index finger (2D length and its correlation with height, weight and BMI in adult Bangladeshi male. Materials and Methods: This cross-sectional analytical study was conducted in the department of Anatomy, Dhaka Medical College, Dhaka from July 2012 to June 2013 on 100 male MBBS students (20−25 years of age. With the help of digital vernier caliper measurements of index finger length (2D was recorded. Height and weight were measured by the stadiometer and weighing scale respectively. BMI was calculated from height and weight. Pearson’s correlation analysis was done to find out the correlation of index finger length with height, weight and BMI. Results: Significant correlation has been found between the lengths of index fingers (2D and height (p0.05. Conclusion: In this study, we found variation in index finger lengths of both hands of Bangladeshi male subjects, which needs further study and comparison.

  17. Soft computing methods for geoidal height transformation

    Science.gov (United States)

    Akyilmaz, O.; Özlüdemir, M. T.; Ayan, T.; Çelik, R. N.

    2009-07-01

    Soft computing techniques, such as fuzzy logic and artificial neural network (ANN) approaches, have enabled researchers to create precise models for use in many scientific and engineering applications. Applications that can be employed in geodetic studies include the estimation of earth rotation parameters and the determination of mean sea level changes. Another important field of geodesy in which these computing techniques can be applied is geoidal height transformation. We report here our use of a conventional polynomial model, the Adaptive Network-based Fuzzy (or in some publications, Adaptive Neuro-Fuzzy) Inference System (ANFIS), an ANN and a modified ANN approach to approximate geoid heights. These approximation models have been tested on a number of test points. The results obtained through the transformation processes from ellipsoidal heights into local levelling heights have also been compared.

  18. A nomograph method for assessing body weight.

    Science.gov (United States)

    Thomas, A E; McKay, D A; Cutlip, M B

    1976-03-01

    The ratio of weight/height emerges from varied epidemiological studies as the most generally useful index of relative body mass in adults. The authors present a nomograph to facilitate use of this relationship in clinical situations. While showing the range of weight given as desirable in life insurance studies, the scale expresses relative weight as a continuous variable. This method encourages use of clinical judgment in interpreting "overweight" and "underweight" and in accounting for muscular and skeletal contributions to measured mass.

  19. The Sine Method: An Alternative Height Measurement Technique

    Science.gov (United States)

    Don C. Bragg; Lee E. Frelich; Robert T. Leverett; Will Blozan; Dale J. Luthringer

    2011-01-01

    Height is one of the most important dimensions of trees, but few observers are fully aware of the consequences of the misapplication of conventional height measurement techniques. A new approach, the sine method, can improve height measurement by being less sensitive to the requirements of conventional techniques (similar triangles and the tangent method). We studied...

  20. Developmental charts for children with osteogenesis imperfecta, type I (body height, body weight and BMI).

    Science.gov (United States)

    Graff, Krzysztof; Syczewska, Malgorzata

    2017-03-01

    Osteogenesis imperfecta (OI) is a rare genetic disorder of type I collagen. Type I is the most common, which is called a non-deforming type of OI, as in this condition, there are no major bone deformities. This type is characterised by blue sclera and vertebral fractures, leading to mild scoliosis. The body height of these patients is regarded as normal, or only slightly reduced, but there are no data proving this in the literature. The aim of this study is the preparation of the developmental charts of children with OI type I. The anthropometric data of 117 patients with osteogenesis imperfecta were used in this study (61 boys and 56 girls). All measurements were pooled together into one database (823 measurements in total). To overcome the problem of the limited number of data being available in certain age classes and gender groups, the method called reverse transformation was used. The body height of the youngest children, aged 2 and 3 years, is less than that of their healthy peers. Children between 4 and 7 years old catch up slightly, but at later ages, development slows down, and in adults, the median body height shows an SDS of -2.7. These results show that children with type I OI are smaller from the beginning than their healthy counterparts, their development slows down from 8 years old, and, ultimately, their body height is impaired. What is Known: • The body height of patients with osteogenesis imperfecta type I is regarded as normal, or only slightly reduced, but in the known literature, there is no measurement data supporting this opinion. What is New: • Children with type I osteogenesis imperfecta are smaller from the beginning than their healthy counterparts, their development slows down from 8 years old and, ultimately, their final body height is impaired. • The developmental charts for the body height, body weight and BMI of children with type I osteogenesis imperfecta are shown.

  1. Childhood Height and Birth Weight in Relation to Future Prostate Cancer Risk

    DEFF Research Database (Denmark)

    Cook, Michael B; Gamborg, Michael; Aarestrup, Julie

    2013-01-01

    Adult height has been positively associated with prostate cancer risk. However, the exposure window of importance is currently unknown and assessments of height during earlier growth periods are scarce. In addition, the association between birth weight and prostate cancer remains undetermined. We...

  2. Effects of Stimulants on Height and Weight: A Review of the Literature

    Science.gov (United States)

    Faraone, Stephen V.; Biederman, Joseph; Morley, Christopher P.; Spencer, Thomas J.

    2008-01-01

    The article reviews existing literature on the effects of stimulant medications on the growth of children with attention-deficit/hyperactivity disorder. It concludes that treatment with stimulants in childhood results in moderate growth deficit in height and weight.

  3. Weight-for-length/height growth curves for children and adolescents in China in comparison with body mass index in prevalence estimates of malnutrition.

    Science.gov (United States)

    Zong, Xinnan; Li, Hui; Zhang, Yaqin; Wu, Huahong

    2017-05-01

    It is important to update weight-for-length/height growth curves in China and re-examine their performance in screening malnutrition. To develop weight-for-length/height growth curves for Chinese children and adolescents. A total of 94 302 children aged 0-19 years with complete sex, age, weight and length/height data were obtained from two cross-sectional large-scaled national surveys in China. Weight-for-length/height growth curves were constructed using the LMS method before and after average spermarcheal/menarcheal ages, respectively. Screening performance in prevalence estimates of wasting, overweight and obesity was compared between weight-for-height and body mass index (BMI) criteria based on a test population of 21 416 children aged 3-18. The smoothed weight-for-length percentiles and Z-scores growth curves with length 46-110 cm for both sexes and weight-for-height with height 70-180 cm for boys and 70-170 cm for girls were established. The weight-for-height and BMI-for-age had strong correlation in screening wasting, overweight and obesity in each age-sex group. There was no striking difference in prevalence estimates of wasting, overweight and obesity between two indicators except for obesity prevalence at ages 6-11. This set of smoothed weight-for-length/height growth curves may be useful in assessing nutritional status from infants to post-pubertal adolescents.

  4. Systems and methods that generate height map models for efficient three dimensional reconstruction from depth information

    Science.gov (United States)

    Frahm, Jan-Michael; Pollefeys, Marc Andre Leon; Gallup, David Robert

    2015-12-08

    Methods of generating a three dimensional representation of an object in a reference plane from a depth map including distances from a reference point to pixels in an image of the object taken from a reference point. Weights are assigned to respective voxels in a three dimensional grid along rays extending from the reference point through the pixels in the image based on the distances in the depth map from the reference point to the respective pixels, and a height map including an array of height values in the reference plane is formed based on the assigned weights. An n-layer height map may be constructed by generating a probabilistic occupancy grid for the voxels and forming an n-dimensional height map comprising an array of layer height values in the reference plane based on the probabilistic occupancy grid.

  5. How do low/high height and weight variation affect upper limb movements during manual material handling of industrial boxes?

    Directory of Open Access Journals (Sweden)

    Ana B. Oliveira

    Full Text Available OBJECTIVES: To evaluate the effect of surface height and load weight on upper limb movements and electromyographic (EMG recordings during manual handling performed by both experienced and inexperienced lifter subjects. METHODS: Sixteen experienced and sixteen inexperienced lifters handled a box (both 7 and 15 kg from an intermediate height (waist level to either a high or low surface. Electromyography and video images were recorded during the tasks. The 10th, 50th and 90th percentiles were calculated for the deltoid and biceps muscles, shoulder flexion, shoulder abduction, and elbow flexion movements. Groups, right/left sides, weights and heights were compared. There were no differences between either groups or sides. RESULTS: Weight and height variations affected EMG and posture, although weight had more impact on EMG. Shoulder abduction and flexion movements higher than 60º occurred, particularly for the higher surface. Shoulder flexion was also higher when the box was moved to the low height. This study provides new evidence as shoulder postures during boxes handling on low surfaces had not previously been evaluated. CONCLUSIONS: The high demand of upper limb in manual material handling tasks is clear, particularly for the shoulder. This knowledge can be used by physical therapists to plan better rehabilitation programs for manual material handling-related disorders, particularly focusing on return to work.

  6. Preliminary radiation protection tests for the body height and body weight of the Chinese reference man

    International Nuclear Information System (INIS)

    Shan, Z.Y.; Chang, Z.Y.; Lan, W.Z.; Yin, G.A.; Li, G.F.

    1985-01-01

    The radiation protection standard recommended by ICRP was evaluated in terms of its suitability for Chinese people. The body height and weight of 100,325 healthy Chinese were measured and anatomical data collected from usable corpses of persons who died by accident or sudden death. The data included the size and weight of certain organs. 18 refs

  7. Physical growth of the shuar: Height, Weight, and BMI references for an indigenous amazonian population.

    Science.gov (United States)

    Urlacher, Samuel S; Blackwell, Aaron D; Liebert, Melissa A; Madimenos, Felicia C; Cepon-Robins, Tara J; Gildner, Theresa E; Snodgrass, J Josh; Sugiyama, Lawrence S

    2016-01-01

    Information concerning physical growth among small-scale populations remains limited, yet such data are critical to local health efforts and to foster basic understandings of human life history and variation in childhood development. Using a large dataset and robust modeling methods, this study aims to describe growth from birth to adulthood among the indigenous Shuar of Amazonian Ecuador. Mixed-longitudinal measures of height, weight, and body mass index (BMI) were collected from Shuar participants (n = 2,463; age: 0-29 years). Centile growth curves and tables were created for each anthropometric variable of interest using Generalized Additive Models for Location, Scale, and Shape (GAMLSS). Pseudo-velocity and Lambda-Mu-Sigma curves were generated to further investigate Shuar patterns of growth and to facilitate comparison with United States Center for Disease Control and Prevention and multinational World Health Organization growth references. The Shuar are small throughout life and exhibit complex patterns of growth that differ substantially from those of international references. Similar to other Amazonians, Shuar growth in weight compares more favorably to references than growth in height, resulting in BMI curves that approximate international medians. Several additional characteristics of Shuar development are noteworthy, including large observed variation in body size early in life, significant infant growth faltering, extended male growth into adulthood, and a markedly early female pubertal growth spurt in height. Phenotypic plasticity and genetic selection in response to local environmental factors may explain many of these patterns. Providing a detailed reference of growth for the Shuar and other Amazonian populations, this study possesses direct clinical application and affords valuable insight into childhood health and the ecology of human growth. © 2015 Wiley Periodicals, Inc.

  8. Five-class height-weight mean and SD system applying Estonian reference values of height-weight mean and SD for systematization of seventeen-year-old conscripts' anthropometric data.

    Science.gov (United States)

    Lintsi, Mart; Kaarma, Helje; Aunapuu, Marina; Arend, Andres

    2007-03-01

    A study of 739 conscripts aged 17 years from the town of Tartu and from the Tartu county was performed. Height, weight, 33 anthropometric measurements and 12 skinfolds were measured. The data were classified into five height-weight mean and SD-classes applying the Estonian reference values for this age and sex (Grünberg et al. 1998). There were 3 classes with conformity between height and weight class: 1--small (small height and small weight), 2--medium (medium height and medium weight), 3--large (large height and large weight), 4--weight class dominating (pyknomorphic) and 5--height class dominating (leptomorphic). It was found, that in classes 1, 2 and 3 the height and weight increase was in accordance with the increase in all heights, breadths and depths, circumferences, skinfolds, body fat, muscle and bone mass. In class 4 circumferences, skinfolds, body fat and muscle mass were bigger. In class 5 all heights and the relative bone mass were bigger. The present investigation confirms the assumption that the five height-weight mean and SD five-class system applying the Estonian reference values for classifying the anthropometric variables is suitable for seventeen-year-old conscripts. As well the border values of 5%, 50% and 95% for every anthropometrical variable in the five-classes were calculated, which may be helpful for practical classifying.

  9. Effect of weight, height and BMI on injury outcome in side impact crashes without airbag deployment.

    Science.gov (United States)

    Pal, Chinmoy; Tomosaburo, Okabe; Vimalathithan, K; Jeyabharath, M; Muthukumar, M; Satheesh, N; Narahari, S

    2014-11-01

    A comprehensive analysis is performed to evaluate the effect of weight, height and body mass index (BMI) of occupants on side impact injuries at different body regions. The accident dataset for this study is based on the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) for accident year 2000-08. The mean BMI values for driver and front passenger are estimated from all types of crashes using NASS database, which clearly indicates that mean BMI has been increasing over the years in the USA. To study the effect of BMI in side impact injuries, BMI was split into three groups namely (1) thin (BMI30). For more clear identification of the effect of BMI in side impact injuries, a minimum gap of three BMI is set in between each adjacent BMI groups. Car model years from MY1995-1999 to MY2000-2008 are chosen in order to identify the degree of influence of older and newer generation of cars in side impact injuries. Impact locations particularly side-front (F), side-center (P) and side-distributed (Y) are chosen for this analysis. Direction of force (DOF) considered for both near side and far side occupants are 8 o'clock, 9 o'clock, 10 o'clock and 2 o'clock, 3 o'clock and 4 o'clock respectively. Age <60 years is also one of the constraints imposed on data selection to minimize the effect of bone strength on the occurrence of occupant injuries. AIS2+ and AIS3+ injury risk in all body regions have been plotted for the selected three BMI groups of occupant, delta-V 0-60kmph, two sets (old and new) of car model years. The analysis is carried with three approaches: (a) injury risk percentage based on simple graphical method with respect to a single variable, (b) injury distribution method where the injuries are marked on the respective anatomical locations and (c) logistic regression, a statistical method, considers all the related variables together. Lower extremity injury risk appears to be high for thin BMI group. It is found that BMI does not have much

  10. Height and weight distribution of lower-middle income group of radiation workers

    International Nuclear Information System (INIS)

    Datta, S.; Sharma, R.C.; Sunta, C.M.

    1982-01-01

    Workers in the nuclear industry who are occasionally exposed to a radioactive environment were monitored for possible internal contamination. Calibration of the detection equipment was carried out with the help of a phantom. It is imperative that the phantom should have the physical dimensions of the subjects being monitored. As a step towards evolving a reference phantom, the height and weight distribution of the workers has been studied. The subjects included in this study are from lower middle income group drawing salaries between Rs 500 to 1000 per month. Mean weight +- SD was found to be 56.2 +- 8.70 kg and height 167 +- 5.90 cm. these averages match well with the data given by certain Life Insurance Companies in India. Although mean weight was found to be appreciably higher than the value reported in 1966, based on autopsy data, the mean weight and height are much less than the reference man values adopted by International Commission on Radiological Protection (ICRP) which are based on western man (average weight = 70 kg., average height = 174 cm). (author)

  11. Height, weight and BMI percentiles and nutritional status relative to the international growth references among Pakistani school-aged children

    Directory of Open Access Journals (Sweden)

    Mushtaq Muhammad Umair

    2012-03-01

    Full Text Available Abstract Background Child growth is internationally recognized as an important indicator of nutritional status and health in populations. This study was aimed to compare age- and gender-specific height, weight and BMI percentiles and nutritional status relative to the international growth references among Pakistani school-aged children. Methods A population-based study was conducted with a multistage cluster sample of 1860 children aged five to twelve years in Lahore, Pakistan. Smoothed height, weight and BMI percentile curves were obtained and comparison was made with the World Health Organization 2007 (WHO and United States' Centers for Disease Control and Prevention 2000 (USCDC references. Over- and under-nutrition were defined according to the WHO and USCDC references, and the International Obesity Task Force (IOTF cut-offs. Simple descriptive statistics were used and statistical significance was considered at P Results Height, weight and BMI percentiles increased with age among both boys and girls, and both had approximately the same height and a lower weight and BMI as compared to the WHO and USCDC references. Mean differences from zero for height-, weight- and BMI-for-age z score values relative to the WHO and USCDC references were significant (P Conclusion Pakistani school-aged children significantly differed from the WHO and USCDC references. However, z score means relative to the WHO reference were closer to zero and the present study as compared to the USCDC reference. Overweight and obesity were significantly higher while underweight and thinness/wasting were significantly lower relative to the WHO reference as compared to the USCDC reference and the IOTF cut-offs. New growth charts for Pakistani children based on a nationally representative sample should be developed. Nevertheless, shifting to use of the 2007 WHO child growth reference might have important implications for child health programs and primary care pediatric clinics.

  12. Predicting human height by Victorian and genomic methods.

    Science.gov (United States)

    Aulchenko, Yurii S; Struchalin, Maksim V; Belonogova, Nadezhda M; Axenovich, Tatiana I; Weedon, Michael N; Hofman, Albert; Uitterlinden, Andre G; Kayser, Manfred; Oostra, Ben A; van Duijn, Cornelia M; Janssens, A Cecile J W; Borodin, Pavel M

    2009-08-01

    In the Victorian era, Sir Francis Galton showed that 'when dealing with the transmission of stature from parents to children, the average height of the two parents, ... is all we need care to know about them' (1886). One hundred and twenty-two years after Galton's work was published, 54 loci showing strong statistical evidence for association to human height were described, providing us with potential genomic means of human height prediction. In a population-based study of 5748 people, we find that a 54-loci genomic profile explained 4-6% of the sex- and age-adjusted height variance, and had limited ability to discriminate tall/short people, as characterized by the area under the receiver-operating characteristic curve (AUC). In a family-based study of 550 people, with both parents having height measurements, we find that the Galtonian mid-parental prediction method explained 40% of the sex- and age-adjusted height variance, and showed high discriminative accuracy. We have also explored how much variance a genomic profile should explain to reach certain AUC values. For highly heritable traits such as height, we conclude that in applications in which parental phenotypic information is available (eg, medicine), the Victorian Galton's method will long stay unsurpassed, in terms of both discriminative accuracy and costs. For less heritable traits, and in situations in which parental information is not available (eg, forensics), genomic methods may provide an alternative, given that the variants determining an essential proportion of the trait's variation can be identified.

  13. Climate and the weight/height relationship in sub-Saharan Africa.

    Science.gov (United States)

    Hiernaux, J; Rudan, P; Brambati, A

    1975-01-01

    25 populations of the rain forest and 44 of the open country, all descended from the West-Central African stock which lived in the latter biome, are compared for body weight and height. On a log weight/height diagram, the 69 populations cluster along a straight line which intersects the lines of equal body weight/surface ratio: the shorter the body size, the lower the ratio tends to be. The rain forest populations are concentrated in the lower part of the bivariate distribution. The shortest one, the Mbuti Pygmies, has a very low ratio despite a relatively heavy weight. The shorter stature of the rain forest populations seems to be largely genetic in origin; it probably results from selective pressure exerted by the thermal stres in this hot and wet biome where sweating is of low thermolytic efficiency. The amount of reduction of adult stature depends for a large part on the number of generations spent in the forest by the population. Line A (in figure 1) is similar to a growth trend. The 69 populations differ genetically by the target that growth has to reach on a common log weight/height trend line. They achieve this differentiation through different speeds of growth.

  14. ABCC-JNIH Adult Health Study, Hiroshima and Nagasaki 1958-1960: height-weight tables

    Energy Technology Data Exchange (ETDEWEB)

    Seigel, D

    1962-11-14

    From measurements taken in the Adult Health Study in Nagasaki and Hiroshima, tables of weight have been compiled. They are presented in the metric system, specific for height, sex, and age group. Five percentiles are presented as a guide for describing the distribution of weights. These values represent smoothing of the original data. This was accomplished by fitting second degree regression equations by least squares to the relationship of the logarithm of weight on height, separately for each age-sex group. This provided medians; other percentiles were obtained by adding or subtracting a term of the form KS, where K was taken from a table of normal deviates, and S was estimated from the data. The use and limitations of the tables were discussed. 10 tables.

  15. Height, weight and body mass index in early adulthood and risk of schizophrenia

    DEFF Research Database (Denmark)

    Sørensen, Holger Jelling; Mortensen, E L; Reinisch, J M

    2006-01-01

    individuals born between 1959 and 1961. In 1999, cases of schizophrenia were identified in the Danish Psychiatric Central Register, and the cases were compared with the cohort pool of controls with respect to height, weight, and BMI from draft records. The effect of low BMI was adjusted for parental social...... status when the cohort members were 1 year old, birth weight, birth length, and maternal pre-pregnancy BMI. RESULTS: Forty-five cases of schizophrenia had a lower young adult mean body weight and BMI than controls. A significant inverse relationship between BMI and risk of later schizophrenia was found....... No significant differences between cases and controls were observed with respect to adult height. CONCLUSION: Independent of several possible confounders, an inverse relationship between young adult BMI and risk of later development of schizophrenia was demonstrated in this all-male sample....

  16. Height, weight and BMI percentiles and nutritional status relative to the international growth references among Pakistani school-aged children

    OpenAIRE

    Mushtaq, Muhammad Umair; Gull, Sibgha; Mushtaq, Komal; Abdullah, Hussain Muhammad; Khurshid, Usman; Shahid, Ubeera; Shad, Mushtaq Ahmad; Akram, Javed

    2012-01-01

    Abstract Background Child growth is internationally recognized as an important indicator of nutritional status and health in populations. This study was aimed to compare age- and gender-specific height, weight and BMI percentiles and nutritional status relative to the international growth references among Pakistani school-aged children. Methods A population-based study was conducted with a multistage cluster sample of 1860 children aged five to twelve years in Lahore, Pakistan. Smoothed heigh...

  17. Body height and weight of patients with childhood onset and adult onset thyrotoxicosis.

    Science.gov (United States)

    Takamatsu, J; Kobe, N; Ito, M; Ohsawa, N

    1999-03-01

    The present study has compared body height and weight of thyrotoxic female patients of childhood onset and adult onset. The body height of 141 out of 143 (99%) adult-onset thyrotoxic patients was within the range of mean +/- 2SD for the age-matched general Japanese female population. On the other hand, in 42 patients with childhood-onset thyrotoxicosis, 6 (14%) had their height being greater than the mean + 2SD of general population, and 34 (81%) were taller than the mean value. In 86 patients with siblings, 42 (49%) were at least 2 cm taller than their sisters, and 26 (30%) were more than 2 cm shorter than their sisters. The body weight of 27 out of 42 (68%) patients younger than 20 years was not decreased but was even greater than the mean value for the age-matched general population. The results indicate that excessive thyroid hormone in vivo enhances body height in humans. The increased body weight in some young patients suggests that enhanced dietary intake due to increased appetite in hyperthyroidism has overcome the energy loss with increased metabolism.

  18. Influence of fall height on high impact polystyrene deformation and characteristics of drop weight test

    Directory of Open Access Journals (Sweden)

    Mizera Ales

    2017-01-01

    Full Text Available This study deals with high impact polystyrene (HIPS which was subjected the drop-weight test. HIPS is a polymer produced by the reaction between butadiene synthetic elastomer and styrene (5–14 % which contains the crystal polymer in certain amounts and is commonly used in mechanical engineering applications where machine parts are exposed to impact loading. The injection moulded HIPS samples were subjected the penetration test at different fall heights and the results were subsequently evaluated and discussed. It was found out that all fall heights are suitable for HIPS penetration, but the optimal one is 50 J because of the smallest variation range. Higher heights are not needed because of increasing power consumption of the test device. From the results, it is clear, that HIPS is not so highly impact resistant material as for example HDPE, because of that is this material suitable for applications where is not often exposed to too big impacts at high velocities.

  19. Height and Weight Estimation From Anthropometric Measurements Using Machine Learning Regressions.

    Science.gov (United States)

    Rativa, Diego; Fernandes, Bruno J T; Roque, Alexandre

    2018-01-01

    Height and weight are measurements explored to tracking nutritional diseases, energy expenditure, clinical conditions, drug dosages, and infusion rates. Many patients are not ambulant or may be unable to communicate, and a sequence of these factors may not allow accurate estimation or measurements; in those cases, it can be estimated approximately by anthropometric means. Different groups have proposed different linear or non-linear equations which coefficients are obtained by using single or multiple linear regressions. In this paper, we present a complete study of the application of different learning models to estimate height and weight from anthropometric measurements: support vector regression, Gaussian process, and artificial neural networks. The predicted values are significantly more accurate than that obtained with conventional linear regressions. In all the cases, the predictions are non-sensitive to ethnicity, and to gender, if more than two anthropometric parameters are analyzed. The learning model analysis creates new opportunities for anthropometric applications in industry, textile technology, security, and health care.

  20. Concordance of self-report and measured height and weight of college students.

    Science.gov (United States)

    Quick, Virginia; Byrd-Bredbenner, Carol; Shoff, Suzanne; White, Adrienne A; Lohse, Barbara; Horacek, Tanya; Kattelmann, Kendra; Phillips, Beatrice; Hoerr, Sharon L; Greene, Geoffrey

    2015-01-01

    This study examined associations between college students' self-report and measured height and weight. Participants (N = 1,686) were 77% white, 62% female, aged 18-24 years (mean ± SD, 19.1 ± 1.1 years), and enrolled at 8 US universities. Body mass index (BMI) was calculated for self-report (via online survey); trained researchers measured height and weight and categorized them as normal (18.5 to obese (30 to obese (≥ 35). Concordance of self-report vs objectively measured BMI groups using chi-square revealed that 93% were accurate, 4% were underestimated, and 2.7% were overestimated. Pearson correlations and adjusted linear regression revealed significant associations between self-report and measured BMI (r = .97; P students. Copyright © 2015 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  1. Validity of parent-reported weight and height of preschool children measured at home or estimated without home measurement: a validation study

    Directory of Open Access Journals (Sweden)

    Cox Bianca

    2011-07-01

    Full Text Available Abstract Background Parental reports are often used in large-scale surveys to assess children's body mass index (BMI. Therefore, it is important to know to what extent these parental reports are valid and whether it makes a difference if the parents measured their children's weight and height at home or whether they simply estimated these values. The aim of this study is to compare the validity of parent-reported height, weight and BMI values of preschool children (3-7 y-old, when measured at home or estimated by parents without actual measurement. Methods The subjects were 297 Belgian preschool children (52.9% male. Participation rate was 73%. A questionnaire including questions about height and weight of the children was completed by the parents. Nurses measured height and weight following standardised procedures. International age- and sex-specific BMI cut-off values were employed to determine categories of weight status and obesity. Results On the group level, no important differences in accuracy of reported height, weight and BMI were identified between parent-measured or estimated values. However, for all 3 parameters, the correlations between parental reports and nurse measurements were higher in the group of children whose body dimensions were measured by the parents. Sensitivity for underweight and overweight/obesity were respectively 73% and 47% when parents measured their child's height and weight, and 55% and 47% when parents estimated values without measurement. Specificity for underweight and overweight/obesity were respectively 82% and 97% when parents measured the children, and 75% and 93% with parent estimations. Conclusions Diagnostic measures were more accurate when parents measured their child's weight and height at home than when those dimensions were based on parental judgements. When parent-reported data on an individual level is used, the accuracy could be improved by encouraging the parents to measure weight and height

  2. Ecological analysis of secular trends in low birth weight births and adult height in Japan.

    Science.gov (United States)

    Morisaki, Naho; Urayama, Kevin Yuji; Yoshii, Keisuke; Subramanian, S V; Yokoya, Susumu

    2017-10-01

    Japan, which currently maintains the highest life expectancy in the world and has experienced an impressive gain in adult height over the past century, has suffered a dramatic twofold increase in low birth weight (LBW) births since the 1970s. We observed secular trends in birth characteristics using 64 115 249 live births included the vital statistics (1969-2014), as well as trends in average height among 3 145 521 adults born between 1969 and 1996, included in 79 surveys conducted among a national, subnational or community population in Japan. LBW rates exhibited a U-shaped pattern showing reductions until 1978-1979 (5.5%), after which it increased. Conversely, average adult height peaked for those born during the same period (men, 171.5 cm; women, 158.5 cm), followed by a reduction over the next 20 years. LBW rate and adult height showed a strong inverse correlation (men, r=-0.98; women, r=-0.88). A prediction model based on birth and economical characteristics estimated the national average of adult height would continue to decline, to 170.0cm (95% CI 169.6 to 170.3) for men and 157.9cm (95% CI 157.5 to 158.3) for women among those born in 2014. Adult height in Japan has started to decline for those born after 1980, a trend that may be attributed to increases in LBW births over time. Considering the known association between shorter adult height and adverse health outcomes, evidence of population-level decline in adult health due to long-term consequences of increasing LBW births in Japan is anticipated. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  3. The effect of height, weight and head circumference on gross motor development in achondroplasia.

    Science.gov (United States)

    Ireland, Penelope Jane; Ware, Robert S; Donaghey, Samantha; McGill, James; Zankl, Andreas; Pacey, Verity; Ault, Jenny; Savarirayan, Ravi; Sillence, David; Thompson, Elizabeth; Townshend, Sharron; Johnston, Leanne M

    2013-02-01

    This study aimed to investigate whether height, weight, head circumference and/or relationships between these factors are associated with gross motor milestone acquisition in children with achondroplasia. Population-based data regarding timing of major gross motor milestones up to 5 years were correlated with height, weight and head circumference at birth and 12 months in 48 children with achondroplasia born in Australia and New Zealand between 2000 and 2009. Although as a group children with achondroplasia showed delayed gross motor skill acquisition, within group differences in height, weight or head circumference did not appear to influence timing of gross motor skills before 5 years. The exception was lie to sit transitioning, which appears likely to occur earlier if the child is taller and heavier at 12 months, and later if the child has significant head-to-body disproportion. This is the first study to investigate the relationship between common musculoskeletal impairments associated with achondroplasia and timing of gross motor achievement. Identification of the musculoskeletal factors that exacerbate delays in transitioning from lying to sitting will assist clinicians to provide more proactive assessment, advice and intervention regarding motor skill acquisition for this population. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  4. Colombian reference growth curves for height, weight, body mass index and head circumference.

    Science.gov (United States)

    Durán, Paola; Merker, Andrea; Briceño, Germán; Colón, Eugenia; Line, Dionne; Abad, Verónica; Del Toro, Kenny; Chahín, Silvia; Matallana, Audrey Mary; Lema, Adriana; Llano, Mauricio; Céspedes, Jaime; Hagenäs, Lars

    2016-03-01

    Published Growth studies from Latin America are limited to growth references from Argentina and Venezuela. The aim of this study was to construct reference growth curves for height, weight, body mass index (BMI) and head circumference of Colombian children in a format that is useful for following the growth of the individual child and as a tool for public health. Prospective measurements from 27 209 Colombian children from middle and upper socio-economic level families were processed using the generalised additive models for location, scale and shape (GAMLSS). Descriptive statistics for length and height, weight, BMI and head circumference for age are given as raw and smoothed values. Final height was 172.3 cm for boys and 159.4 cm for girls. Weight at 18 years of age was 64.0 kg for boys and 54 kg for girls. Growth curves are presented in a ± 3 SD format using logarithmic axes. The constructed reference growth curves are a start for following secular trends in Colombia and are also in the presented layout an optimal clinical tool for health care. ©2015 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

  5. Accuracy of self-reported height, weight and waist circumference in a Japanese sample.

    Science.gov (United States)

    Okamoto, N; Hosono, A; Shibata, K; Tsujimura, S; Oka, K; Fujita, H; Kamiya, M; Kondo, F; Wakabayashi, R; Yamada, T; Suzuki, S

    2017-12-01

    Inconsistent results have been found in prior studies investigating the accuracy of self-reported waist circumference, and no study has investigated the validity of self-reported waist circumference among Japanese individuals. This study used the diagnostic standard of metabolic syndrome to assess the accuracy of individual's self-reported height, weight and waist circumference in a Japanese sample. Study participants included 7,443 Japanese men and women aged 35-79 years. They participated in a cohort study's baseline survey between 2007 and 2011. Participants' height, weight and waist circumference were measured, and their body mass index was calculated. Self-reported values were collected through a questionnaire before the examination. Strong correlations between measured and self-reported values for height, weight and body mass index were detected. The correlation was lowest for waist circumference (men, 0.87; women, 0.73). Men significantly overestimated their waist circumference (mean difference, 0.8 cm), whereas women significantly underestimated theirs (mean difference, 5.1 cm). The sensitivity of self-reported waist circumference using the cut-off value of metabolic syndrome was 0.83 for men and 0.57 for women. Due to systematic and random errors, the accuracy of self-reported waist circumference was low. Therefore, waist circumference should be measured without relying on self-reported values, particularly in the case of women.

  6. Validity of self-reported weight, height, and BMI in mothers of the research Birth in Brazil

    Directory of Open Access Journals (Sweden)

    Roberta Gabriela Pimenta da Silva Araújo

    2017-12-01

    Full Text Available ABSTRACT OBJECTIVE To evaluate the accuracy of information on pre-gestational weight, height, pre-gestational body mass index, and weight at the last prenatal appointment, according to maternal characteristics and sociodemographic and prenatal variables. METHODS The study was developed using data from the face-to-face questionnaire and prenatal card (gold standard of the study “Birth in Brazil, 2011–2012”. To evaluate the differences between the measured and self-reported anthropometric variables, we used the the Kruskal-Wallis test for the variables divided into quartiles. For the continuous variables, we used the Wilcoxon test, Bland-Altman plot, and average difference between the information measured and reported by the women. We estimated sensitivity and the intraclass correlation coefficient. RESULTS In the study, 17,093 women had the prenatal card. There was an underestimation of pre-gestational weight of 1.51 kg (SD = 3.44 and body mass index of 0.79 kg/m2 (SD = 1.72 and overestimation of height of 0.75 cm (SD = 3.03 and weight at the last appointment of 0.22 kg (SD = 2.09. The intraclass correlation coefficients (ICC obtained for the anthropometric variables were: height (ICC = 0.89, pre-gestational weight (ICC = 0.96, pre-gestational body mass index (ICC = 0.92, and weight at the last appointment (ICC = 0.98. CONCLUSIONS The results suggest that the mentioned anthropometric variables were valid for the study population, and they may be used in studies of populations with similar characteristics.

  7. Height, Weight, and Aerobic Fitness Level in Relation to the Risk of Atrial Fibrillation.

    Science.gov (United States)

    Crump, Casey; Sundquist, Jan; Winkleby, Marilyn A; Sundquist, Kristina

    2018-03-01

    Tall stature and obesity have been associated with a higher risk of atrial fibrillation (AF), but there have been conflicting reports of the effects of aerobic fitness. We conducted a national cohort study to examine interactions between height or weight and level of aerobic fitness among 1,547,478 Swedish military conscripts during 1969-1997 (97%-98% of all 18-year-old men) in relation to AF identified from nationwide inpatient and outpatient diagnoses through 2012 (maximal age, 62 years). Increased height, weight, and aerobic fitness level (but not muscular strength) at age 18 years were all associated with a higher AF risk in adulthood. Positive additive and multiplicative interactions were found between height or weight and aerobic fitness level (for the highest tertiles of height and aerobic fitness level vs. the lowest, relative excess risk = 0.51, 95% confidence interval (CI): 0.40, 0.62; ratio of hazard ratios = 1.50, 95% CI: 1.34, 1.65). High aerobic fitness levels were associated with higher risk among men who were at least 186 cm (6 feet, 1 inch) tall but were protective among shorter men. Men with the combination of tall stature and high aerobic fitness level had the highest risk (for the highest tertiles vs. the lowest, adjusted hazard ratio = 1.70, 95% CI: 1.61, 1.80). These findings suggest important interactions between body size and aerobic fitness level in relation to AF and may help identify high-risk subgroups.

  8. Comparison of usual and alternative methods to measure height in mechanically ventilated patients: potential impact on protective ventilation.

    Science.gov (United States)

    Bojmehrani, Azadeh; Bergeron-Duchesne, Maude; Bouchard, Carmelle; Simard, Serge; Bouchard, Pierre-Alexandre; Vanderschuren, Abel; L'Her, Erwan; Lellouche, François

    2014-07-01

    Protective ventilation implementation requires the calculation of predicted body weight (PBW), determined by a formula based on gender and height. Consequently, height inaccuracy may be a limiting factor to correctly set tidal volumes. The objective of this study was to evaluate the accuracy of different methods in measuring heights in mechanically ventilated patients. Before cardiac surgery, actual height was measured with a height gauge while subjects were standing upright (reference method); the height was also estimated by alternative methods based on lower leg and forearm measurements. After cardiac surgery, upon ICU admission, a subject's height was visually estimated by a clinician and then measured with a tape measure while the subject was supine and undergoing mechanical ventilation. One hundred subjects (75 men, 25 women) were prospectively included. Mean PBW was 61.0 ± 9.7 kg, and mean actual weight was 30.3% higher. In comparison with the reference method, estimating the height visually and using the tape measure were less accurate than both lower leg and forearm measurements. Errors above 10% in calculating the PBW were present in 25 and 40 subjects when the tape measure or visual estimation of height was used in the formula, respectively. With lower leg and forearm measurements, 15 subjects had errors above 10% (P bedridden patients on mechanical ventilation. Alternative methods based on lower leg and forearm measurements are potentially interesting solutions to facilitate the accurate application of protective ventilation. Copyright © 2014 by Daedalus Enterprises.

  9. Cross-sectional study of height and weight in the population of Andalusia from age 3 to adulthood

    Directory of Open Access Journals (Sweden)

    Cosano Carlos

    2008-07-01

    Full Text Available Abstract Background and objectives In Andalusia there were no studies including a representative sample of children and adolescent population assessing growth and weight increase. Our objectives were to develop reference standards for weight, height and BMI for the Andalusian pediatric population, from 3 to 18 years of age for both genders, and to identify the final adult height in Andalusia. Subjects and methods Two samples were collected. The first included individuals from 3 to 18 years of age (3592 girls and 3605 boys. They were stratified according type of study center, size of population of origin, age (32 categories of 0.5 years and gender, using cluster sampling. Subjects from >18 to 23 years of age (947 women and 921 men were sampled in 6 non-university educational centers and several university centers in Granada. Exclusion criteria included sons of non-Spanish mother or father, and individuals with chronic conditions and/or therapies affecting growth. Two trained fellows collected the data through February to December 2004, for the first sample, and through January to May 2005, for the second. Reference curves were adjusted using Cole's LMS method, and the quality of the adjustment was assessed using the tests proposed by Royston. In addition, a sensitivity analysis was applied to the final models obtained. Results Data for 9065 cases (4539 women and 4526 men were obtained; 79.39% (n = 7197 in the up to 18 years of age group. In the first sampling only 0.07% (3 girls and 2 boys refused to participate in the study. In addition, 327 students (4.5% were absent when sampling was done. We present mean and standard deviation fort height, weight and BMI at 0.5 years intervals, from 3 to 23 years of age, for both genders. After adjustment with the different models, percentiles for height, weight (percentiles 3, 5, 10, 25, 50, 75, 90, 95, and 97 and BMI (percentiles 3, 5, 50, 85, 95, and 97 are presented for both genders. Conclusion This is

  10. The Influence of Secular Trends in Body Height and Weight on the Prevalence of Overweight and Obesity among Chinese Children and Adolescents.

    Science.gov (United States)

    Fu, Lian Guo; Sun, Li Li; Wu, Shao Wei; Yang, Yi De; Li, Xiao Hui; Wang, Zheng He; Wu, Lu; Wang, Fu Zhi; Ma, Jun

    2016-12-01

    To explore the influence of secular trends in body height and weight on the prevalence of overweight and obesity among Chinese children and adolescents. The data were obtained from five cross-sectional Chinese National Surveys on Students' Constitution and Health. Overweight/obesity was defined as BMI-for-age Z-score of per the Wold Health Organization (WHO) reference values. Body height and weight for each sex and age were standardized to those reported in 1985 (standardized height: SHY; standardized weight: SWY) and for each sex and year at age 7 (standardized height: SHA; standardized weight: SWA) using the Z-score method. The prevalence of overweight/obesity in Chinese children was 20.2% among boys and 10.7% among girls in 2010 and increased continuously from 1985 to 2010. Among boys and girls of normal weight, SHY and SHA were significantly greater than SWY and SWA, respectively (P overweight/obesity, SHY was significantly lower than SWY (P overweight boys aged 7-8 years and girls aged 7-9 years. SHY/SHW and SHA/SWA among normal-weight groups were greater than among overweight and obese groups (P overweight/obesity among Chinese children may be related to a rapid increase in body weight before age 9 and lack of secular increase in body height after age 12. Copyright © 2016 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  11. Assessing the accuracy of self-reported height and weight in an elective surgical population in a Melbourne metropolitan hospital.

    Science.gov (United States)

    Bowden, C; Loughnan, T

    2006-10-01

    A Health Questionnaire serves as a screening form as part of our Hospital Preadmission process and is completed by all patients scheduled for elective surgery. We reviewed the completed Health Questionaires of 444 patients. Completion of the Health Questionnaire requires patients to record their height and weight. At the time of admission their actual height and weight was measured and recorded by nursing staff as part of the preoperative assessment. We compared their estimated body mass index (BMI) from self-reported height and weight, with their actual BMI calculated from height and weight measured upon admission. The measured BMI accorded well with that calculated from reported values and showed no systematic over- or under-reporting. Of 70 patients with a BMI greater than 35, only ten estimated their BMI less than 35 and only five of these had more than a two unit difference. Perioperative patients appear to be more accurate at providing height and weight than previously analysed non-patient groups. However there is not complete accuracy and some patients still provide unreliable information. Whether or not individual practitioners utilize BMI from self-reported height and weight will depend on the accuracy that they require for their purposes. Of note there was greater accuracy in prediction of height and weight than in the derived variable of BMI due to the calculations required.

  12. Anthropometric parameters: weight height, body mass index and mammary volume in relationship with the mammographic pattern

    International Nuclear Information System (INIS)

    Perez-Candela, V.; Busto, C.; Avila, R.; Marrero, M. G.; Liminana, J. M.; Orengo, J. C.

    2001-01-01

    A prospective study to attempt to relate the anthropometric parameters of height, weight, body mass index as well as age with the mammographic patterns obtained for the patients and obtain an anthropometric profile was carried out. The study was performed in 1.000 women who underwent a mammography in cranial-caudal and medial lateral oblique projection of both breasts, independently of whether they were screened or diagnosed. Prior to the performance of the mammography, weight and height were obtained, and this was also performed by the same technicians, and the patient were asked their bra size to deduce breast volume. With the weight, the body mass index of Quetelet was calculated (weight [kg]/height''2 (ml). After reading the mammography, the patient was assigned to one of the four mammographic patterns considered in the BIRADS (Breast Imaging Reporting and Data System) established by the ACR (American College of Radiology): type I (fat). type II (disperse fibroglandular densities), type III (fibroglandular densities distributed heterogeneously), type 4 (dense). The results were introduced into a computer database and the SPSS 8.0 statistical program was applied, using the statistical model of multivariant logistic regression. In women under 40 years, with normal weight, the dense breast pattern accounted for 67.8% and as the body mass index (BMI) increased, this pattern decreased to 25.1%. The fat pattern is 20% and as the BMI increases, this increased to 80%. In 40-60 year old women with normal weight, the dense pattern accounts for 44% and decreases to 20.9% in the grades II, III and IV obese. The fat pattern is 11.1% and increases to 53.7% in the grade II, III and IV obese. In women over 60 with normal, the dense pattern accounts for 19.3% and and decreases to 13% in the grade III obese. The fat pattern is 5.3% and increases to 20.2% in the grade iii of obesity. As age increases, the probability of presenting a mammographic pattern with a fat image in the

  13. Pubertal Development and Prepubertal Height and Weight Jointly Predict Young Adult Height and Body Mass Index in a Prospective Study in South Africa.

    Science.gov (United States)

    Stein, Aryeh D; Lundeen, Elizabeth A; Martorell, Reynaldo; Suchdev, Parminder S; Mehta, Neil K; Richter, Linda M; Norris, Shane A

    2016-07-01

    Height and adiposity track over childhood, but few studies, to our knowledge, have longitudinally examined the mediating relation of the timing and progression of puberty. We assessed interrelations between prepubertal height and body mass index, the progression through puberty, and young adult height and adiposity. We analyzed data from the Birth to Twenty Plus study (females, n = 823; males, n = 765). Serial measures of anthropometry and pubertal development were obtained between ages 9 and 16 y. We used latent class growth analysis to categorize pubertal development with respect to pubic hair (females and males), breasts (females), and genitalia (males) development. Adult height and weight were obtained at ages 18 to 20 y. Among females, higher latent class (earlier initiation and faster progression through puberty) was associated with an increased risk of obesity [pubic hair class 3 compared with class 1: RR, 3.41 (95% CI: 1.57, 7.44)] and inconsistent associations with height. Among males, higher latent class was associated with increased adult height [pubic hair development class 3 compared with class 1: 2.43 cm (95% CI: 0.88, 4.00)] and increased risk of overweight/obesity [pubic hair development class 3 compared with class 1: OR, 3.44 (95% CI: 1.44, 8.20)]. In females, the association with adult height became inverse after adjusting for prepubertal height [pubic hair development class 3 compared with class 1: females, -1.31 cm (95% CI: -2.32, -0.31)]; in males, the association with height was attenuated with this adjustment [-0.56 cm (95% CI: -1.63, 0.52)]. Associations with adiposity were attenuated after adjusting for prepubertal adiposity. Progression through puberty modifies the relation between prepubertal and adult anthropometry. Screening for early or rapid progression of puberty might identify children at an increased risk of becoming overweight or obese adults.

  14. Evaluation of three paediatric weight estimation methods in Singapore.

    Science.gov (United States)

    Loo, Pei Ying; Chong, Shu-Ling; Lek, Ngee; Bautista, Dianne; Ng, Kee Chong

    2013-04-01

    Rapid paediatric weight estimation methods in the emergency setting have not been evaluated for South East Asian children. This study aims to assess the accuracy and precision of three such methods in Singapore children: Broselow-Luten (BL) tape, Advanced Paediatric Life Support (APLS) (estimated weight (kg) = 2 (age + 4)) and Luscombe (estimated weight (kg) = 3 (age) + 7) formulae. We recruited 875 patients aged 1-10 years in a Paediatric Emergency Department in Singapore over a 2-month period. For each patient, true weight and height were determined. True height was cross-referenced to the BL tape markings and used to derive estimated weight (virtual BL tape method), while patient's round-down age (in years) was used to derive estimated weights using APLS and Luscombe formulae, respectively. The percentage difference between the true and estimated weights was calculated. For each method, the bias and extent of agreement were quantified using Bland-Altman method (mean percentage difference (MPD) and 95% limits of agreement (LOA)). The proportion of weight estimates within 10% of true weight (p₁₀) was determined. The BL tape method marginally underestimated weights (MPD +0.6%; 95% LOA -26.8% to +28.1%; p₁₀ 58.9%). The APLS formula underestimated weights (MPD +7.6%; 95% LOA -26.5% to +41.7%; p₁₀ 45.7%). The Luscombe formula overestimated weights (MPD -7.4%; 95% LOA -51.0% to +36.2%; p₁₀ 37.7%). Of the three methods we evaluated, the BL tape method provided the most accurate and precise weight estimation for Singapore children. The APLS and Luscombe formulae underestimated and overestimated the children's weights, respectively, and were considerably less precise. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  15. Weight and height prediction of immobilized patients Estimativa de peso e altura de pacientes hospitalizados e imobilizados

    Directory of Open Access Journals (Sweden)

    Estela Iraci Rabito

    2006-12-01

    Full Text Available OBJECTIVE: To confirm the adequacy of the formula suggested in the literature and/or to develop appropriate equations for the Brazilian population of immobilized patients based on simple anthropometric measurements. METHODS: Hospitalized patients were submitted to anthropometry and methods to estimate weight and height of bedridden patients were developed by multiple linear regression. RESULTS: Three hundred sixty eight persons were evaluated at two hospital centers and five weight-predicting and two height-predicting equations were developed from the measurements obtained. Among the new equations developed, the simplest one for weight estimate was: Weight (kg = 0.5759 x (arm circumference, cm + 0.5263 x (abdominal circumference, cm + 1.2452 x (calf circumference, cm -4.8689 x (Sex, male = 1 and female = 2 -32.9241 (r = 0.94; and the one for height estimate was: Height (cm = 58.6940 - 2.9740 x (Sex -0.0736 x (age, years + 0.4958 x (arm length, cm + 1.1320 x (half- span, cm (r = 0.88. The estimates thus calculated did not differ significantly from actual measurements, with p = 0.94 and 0.89 and a mean error of 6.0 and 2.1% for weight and height, respectively. CONCLUSION: We suggest that these equations can be used to estimate the weight and height of bedridden patients when necessary or when these parameters cannot be measured with a scale and a stadiometer.OBJETIVO: Verificar a adequação das fórmulas sugeridas na literatura, e desenvolver equações preditivas de peso e altura para a população hospitalizada brasileira, a partir de medidas antropométricas usuais. MÉTODOS: Realizou-se antropometria e bioimpedância de pacientes hospitalizados. Por meio de regressão linear múltipla, desenvolveram-se fórmulas com o objetivo de prever o peso e a altura. Os resultados foram comparados com os obtidos de fórmulas da literatura e com as medidas reais. RESULTADOS: Foram avaliadas 368 pacientes e desenvolvidas equações preditivas do peso e da

  16. Combined oral contraceptives' influence on weight, body composition, height, and bone mineral density in girls younger than 18 years

    DEFF Research Database (Denmark)

    Warholm, Lina; Petersen, Kresten R; Ravn, Pernille

    2012-01-01

    Combined oral contraceptives (COCs) are increasingly used by adolescents. The aim of this review is to investigate the evidence regarding COCs' influence on weight, height and bone mineral density (BMD) in girls younger than 18 years.......Combined oral contraceptives (COCs) are increasingly used by adolescents. The aim of this review is to investigate the evidence regarding COCs' influence on weight, height and bone mineral density (BMD) in girls younger than 18 years....

  17. Relationship between Height-Weight Difference Index and Body-Fat Percentage Estimated by Bioelectrical Impedance Analysis in Thai Adults

    Directory of Open Access Journals (Sweden)

    Kanokkarn Juntaping

    2017-01-01

    Full Text Available Introduction. The height-weight difference index (HWDI is a new indicator for evaluating obesity status. While body-fat percentage (BF% is considered to be the most accurate obesity evaluation tool, it is a more expensive method and more difficult to measure than the others. Objective. Our objectives were to find the relationship between HWDI and BF% and to find a BF% prediction model from HWDI in relation to age and gender. Method. Bioelectrical impedance analysis was used to measure BF% in 2,771 healthy adult Thais. HWDI was calculated as the difference between height and weight. Pearson’s correlation coefficient was used to assess the relationship between HWDI and BF%. Multiple linear and nonlinear regression analysis were used to construct the BF% prediction model. Results. HWDI and BF% were found to be inverse which related to a tendency toward a linear relationship. Results of a multivariate linear regression analysis, which included HWDI and age as variables in the model, predicted BF% to be 34.508 − 0.159 (HWDI + 0.161 (age for men and 53.35 − 0.265 (HWDI + 0.132 (age for women. Conclusions. The prediction model provides an easy-to-use obesity evaluation tool that should help awareness of underweight and obesity conditions.

  18. DMSA scan nomograms for renal length and area: Related to patient age and to body weight, height or surface area

    International Nuclear Information System (INIS)

    Hassan, I.M.; Que, L.; Rutland, M.D.

    2002-01-01

    Aim: To create nomograms for renal size as measured from DMSA renal studies, and to test the nomograms for their ability to separate normal from abnormal kidneys. Method: Renal length was measured from posterior oblique views and renal area from posterior views. Results from 253 patients with bilateral normal kidneys were used to create nomograms for renal size relative to patient age, body height, weight or body surface area (BSA). The nomograms enclosed 95% of the normal kidneys, thus indicating the range for 95% confidence limits, and hence the specificity. Each nomogram was then tested against 46 hypertrophied kidneys and 46 damaged kidneys. Results: The results from nomograms of renal length and renal area, compared to age, body height, body weight and BSA are presented. For each nomogram, the range is presented as a fraction of the mean value, and the number of abnormal kidneys (hypertrophied or damaged) outside the normal range is presented as a percentage (indicating the sensitivity). Conclusion: Renal Area was no better than renal length for detecting abnormal kidneys. Patient age was the least useful method of normalisation. BSA normalisation produced the best results most frequently (narrower ranges and highest detection of abnormal kidneys)

  19. Body dimensions and weight to height indices in rescuers from the State Fire Service of Poland

    Directory of Open Access Journals (Sweden)

    Wiśniewski Andrzej

    2018-03-01

    Full Text Available Few studies have been published in Poland concerning body dimensions of firefighters from the State Fire Service although this knowledge is needed for e.g. development of personal protective equipment. The aim of the study was to evaluate body dimensions and weight-to-height ratio in firefighters from the State Fire Service. Using the anthropological procedures, body mass (BM and body height (BH were examined in 178 men at the chronological age (CA of 19.5 to 53 years who were rescuers from the national rescue and fire brigades of the State Fire Service. The study participants were divided into three categories of CA: up to 25 years, between 24 and 44 years, and over 44 years. The results were compared to population standards. It was found that BH of the youngest rescuers was significantly higher (0.05 than in other study participants. Based on the standardized values of BM and BMI, population of firefighters aged over 25 years was found to be characterized by overweight and, in certain cases, even by obesity. The excess level of body mass index (BMI ≥ 25 kgm2 was found in nearly 60% of study participants, with half of the group classified as overweight (n=31, BMI ranging from 25 to 29.9 kg/m2, and 10% classified as obese. Due to the worrying high percentage of cases of excess body mass in firefighters from the State Fire Service, it was found that it is recommended to evaluate the relationships between body height and mass on regular basis during periodical obligatory tests of physical fitness of rescuers from the State Fire Service and to increase the frequency and duration of training sessions.

  20. Differences in bite force between dolichofacial and brachyfacial individuals: Side of mastication, gender, weight and height.

    Science.gov (United States)

    Quiudini, Paulo Roberto; Pozza, Daniel Humberto; Pinto, Ary Dos Santos; de Arruda, Mauricio Ferraz; Guimarães, Antonio Sergio

    2017-07-01

    Due to the bite force importance in functionality of the masticatory system, this study aimed to characterize it in dolichofacial and brachyfacial individuals. A sample comprised by 190 patients was divided into two groups: 90 severe dolichofacial, and 100 severe brachyfacial individuals classified according to the VERT index and the face height ratio (Jarabak quotient). Bite force was measured by using an adjusted digital dynamometer and proper methodology. The sample met the parametric assumptions and presented statistical significance when right and left sides of dolichofacial and brachyfacial individuals were compared. However, within the same group, no differences between the left and right sides were found. Generally, bite force was higher for male, left masticator, age between 41-50 years, weighing over 100kg and between 1.81 and 1.90m tall. Based on the results of this cross-sectional study, it was possible to conclude that the bite force in severe brachyfacial individuals was significantly higher than in severe dolichofacial individuals, being influenced by gender, weight and height. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  1. Growing into obesity: patterns of height growth in those who become normal weight, overweight, or obese as young adults.

    Science.gov (United States)

    Stovitz, Steven D; Demerath, Ellen W; Hannan, Peter J; Lytle, Leslie A; Himes, John H

    2011-01-01

    To study whether patterns of height growth differ by adult obesity status, and determine the contribution of subcutaneous fatness as an explanatory variable for any differences. A multicenter, prospective longitudinal cohort assessed in 3rd grade (8.8 years), 5th grade (11.1 years), 8th grade (14.1 years), and 12th grade (18.3 years). Exposures were young adult obesity status classified by CDC adult BMI categories at 12th grade. Skinfolds were measured in third, fifth, and eighth grades. Outcome was mean height (cm) at the four measurements using repeated-measures ANCOVA for young adult obesity status, and height increments between grades by adult obesity status in sequential models including initial height and, secondarily, initial skinfolds. Adjusted for age, and race/ethnicity, young adult obesity status explained a small, but statistically significant amount of height growth among both females and males within each of the three intervals. Compared with normal weight young adults, overweight or obese young adults stood taller in childhood, but had relatively less growth in height throughout the teenage years. There was no association between adult height and weight status. Skinfolds explained only a small amount of the height patterns in the three weight groups. Childhood and adolescent height growth patterns differ between those who become young adults who are normal weight and those who become overweight or obese. Since differences in fatness explain only a small amount of these height growth patterns, research is needed to identify other determinants. Copyright © 2011 Wiley-Liss, Inc.

  2. Child health in Peru: importance of regional variation and community effects on children's height and weight.

    Science.gov (United States)

    Shin, Heeju

    2007-12-01

    In developing countries, height and weight are good indicators of children's health and nutritional status. Maternal education has been accepted as one of the most important influences on child health. Using the 2000 Demographic and Health Survey of Peru, however, I find that the effect of maternal education varies as a function of region. In the most prosperous urban region, maternal education is less important for child health than in poor rural areas, and a higher level of education has a greater effect in rural areas. Multilevel analysis shows that a significant part of the observed correlation between maternal education and child health is moderated by regional differences and community characteristics. The finding suggests that Peruvian public policy should emphasize resource redistribution as well as women's education, and that investment in maternal education should be considered within regional contexts to enhance child health in rural areas.

  3. Comparison between clinical significance of height-adjusted and weight-adjusted appendicular skeletal muscle mass.

    Science.gov (United States)

    Furushima, Taishi; Miyachi, Motohiko; Iemitsu, Motoyuki; Murakami, Haruka; Kawano, Hiroshi; Gando, Yuko; Kawakami, Ryoko; Sanada, Kiyoshi

    2017-02-13

    This study aimed to compare relationships between height- or weight-adjusted appendicular skeletal muscle mass (ASM/Ht 2 or ASM/Wt) and risk factors for cardiometabolic diseases or osteoporosis in Japanese men and women. Subjects were healthy Japanese men (n = 583) and women (n = 1218). The study population included a young group (310 men and 357 women; age, 18-40 years) and a middle-aged and elderly group (273 men and 861 women; age, ≥41 years). ASM was measured by dual-energy X-ray absorptiometry. The reference values for class 1 and 2 sarcopenia in each sex were defined as values one and two standard deviations below the sex-specific means of the young group, respectively. The reference values for class 1 and 2 sarcopenia defined by ASM/Ht 2 were 7.77 and 6.89 kg/m 2 in men and 6.06 and 5.31 kg/m 2 in women, respectively. The reference values for ASM/Wt were 35.0 and 32.0% in men and 29.6 and 26.4% in women, respectively. In both men and women, ASM/Wt was negatively correlated with higher triglycerides (TG) and positively correlated with serum high-density lipoprotein cholesterol (HDL-C), but these associations were not found in height-adjusted ASM. In women, TG, systolic blood pressure, and diastolic blood pressure in sarcopenia defined by ASM/Wt were significantly higher than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Ht 2 . Whole-body and regional bone mineral density in sarcopenia defined by ASM/Ht 2 were significantly lower than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Wt. Weight-adjusted definition was able to identify cardiometabolic risk factors such as TG and HDL-C while height-adjusted definition could identify factors for osteoporosis.

  4. Weight and height z-scores improve after initiating ART among HIV-infected children in rural Zambia: a cohort study

    Directory of Open Access Journals (Sweden)

    Sinywimaanzi Pamela

    2011-03-01

    Full Text Available Abstract Background Deficits in growth observed in HIV-infected children in resource-poor settings can be reversed with antiretroviral treatment (ART. However, many of the studies have been conducted in urban areas with older pediatric populations. This study was undertaken to evaluate growth patterns after ART initiation in a young pediatric population in rural Zambia with a high prevalence of undernutrition. Methods Between 2007 and 2009, 193 HIV-infected children were enrolled in a cohort study in Macha, Zambia. Children were evaluated every 3 months, at which time a questionnaire was administered, height and weight were measured, and blood specimens were collected. Weight- and height-for-age z-scores were constructed from WHO growth standards. All children receiving ART at enrollment or initiating ART during the study were included in this analysis. Linear mixed effects models were used to model trajectories of weight and height-for-age z-scores. Results A high proportion of study children were underweight (59% and stunted (72% at treatment initiation. Improvements in both weight- and height-for-age z-scores were observed, with weight-for-age z-scores increasing during the first 6 months of treatment and then stabilizing, and height-for-age z-scores increasing consistently over time. Trajectories of weight-for-age z-scores differed by underweight status at treatment initiation, with children who were underweight experiencing greater increases in z-scores in the first 6 months of treatment. Trajectories of height-for-age z-scores differed by age, with children older than 5 years of age experiencing smaller increases over time. Conclusions Some of the effects of HIV on growth were reversed with ART initiation, although a high proportion of children remained underweight and stunted after two years of treatment. Partnerships between treatment and nutrition programs should be explored so that HIV-infected children can receive optimal nutritional

  5. Digital baseline estimation method for multi-channel pulse height analyzing

    International Nuclear Information System (INIS)

    Xiao Wuyun; Wei Yixiang; Ai Xianyun

    2005-01-01

    The basic features of digital baseline estimation for multi-channel pulse height analysis are introduced. The weight-function of minimum-noise baseline filter is deduced with functional variational calculus. The frequency response of this filter is also deduced with Fourier transformation, and the influence of parameters on amplitude frequency response characteristics is discussed. With MATLAB software, the noise voltage signal from the charge sensitive preamplifier is simulated, and the processing effect of minimum-noise digital baseline estimation is verified. According to the results of this research, digital baseline estimation method can estimate baseline optimally, and it is very suitable to be used in digital multi-channel pulse height analysis. (authors)

  6. Validity of self-reported weight, height, and body mass index among university students in Thailand: Implications for population studies of obesity in developing countries.

    Science.gov (United States)

    Lim, Lynette Ly; Seubsman, Sam-Ang; Sleigh, Adrian

    2009-09-25

    Large-scale epidemiological studies commonly use self-reported weights and heights to determine weight status. Validity of such self-reported data has been assessed primarily in Western populations in developed countries, although its use is widespread in developing countries. We examine the validity of obesity based on self-reported data in an Asian developing country, and derive improved obesity prevalence estimates using the "reduced BMI threshold" method. Self-reported and measured heights and weights were obtained from 741 students attending an open university in Thailand (mean age 34 years). Receiver operator characteristic techniques were applied to derive "reduced BMI thresholds." Height was over-reported by a mean of 1.54 cm (SD 2.23) in men and 1.33 cm (1.84) in women. Weight was under-reported by 0.93 kg (3.47) in men and 0.62 kg (2.14) in women. Sensitivity and specificity for determining obesity (Thai BMI threshold 25 kg/m2) using self-reported data were 74.2% and 97.3%, respectively, for men and 71.9% and 100% for women. For men, reducing the BMI threshold to 24.5 kg/m2 increased the estimated obesity prevalence based on self-reports from 29.1% to 33.8% (true prevalence was 36.9%). For women, using a BMI threshold of 24.4 kg/m2, the improvement was from 12.0% to 15.9% (true prevalence 16.7%). Young educated Thais under-report weight and over-report height in ways similar to their counterparts in developed countries. Simple adjustments to BMI thresholds will overcome these reporting biases for estimation of obesity prevalence. Our study suggests that self-reported weights and heights can provide economical and valid measures of weight status in high school-educated populations in developing countries.

  7. Study of weight, height, body mass index, energy and nutrients intake of 11-14 years old girls, Tehran

    Directory of Open Access Journals (Sweden)

    Sadeqipoor H

    1999-09-01

    Full Text Available A descriptive, analytical cross-sectional syudy was conducted in 1996 on 350 female students 11-14 years old in the center of Tehran, Iran. The general objective was determining energy and nutrient intakes and weight, height and BMI (Body Mass Index of the girls, using anthropometric measurements, interviews (24-hour dietary recall and food consumption frequency, and the NCHS standards. The results were as follows: 1 Based on weight for age and the Z-score, 20% of the girls suffered from mild past and present malnutrition. 2 Based on height for age and BMI, 16.6%, 12.5%, and 1.3% suffered from mild past malnutrition, severe present malnutrition and overweight, respectively. 3 The height curves were normal, as compared to the respective standards. 4 The BMI curves were quite different from the respective standards. 5 On the whole, 53.7%, 49.7%, 86.0%, 59.0%, 67.7%, 76.5% and 88.0% of the girls had low intakes of energy, vitamin A, riboflavin, vitamin B12, folic acid, calcium, and iron, respectively. 6 A positive linear correlation was observed between energy intake and height, vitamin A intake and weight, zinc intake and height, and carbohydrate intake and height.

  8. Comparison of Circumference Measures and Height-Weight Tables With Dual-Energy X-Ray Absorptiometry Assessment of Body Composition in R.O.T.C. Cadets.

    Science.gov (United States)

    Mitchell, Katherine M; Pritchett, Robert C; Gee, David L; Pritchett, Kelly L

    2017-09-01

    Mitchell, KM, Pritchett, RC, Gee, DL, and Pritchett, KL. Comparison of circumference measures and height-weight tables with dual-energy X-ray absorptiometry assessment of body composition in R.O.T.C. cadets. J Strength Cond Res 31(9): 2552-2556, 2017-Height-weight tables and circumference measures are used by the U.S. Army to predict body composition because they require little equipment or expertise. However, agreement between the Army's new 2002 circumference equation and an established laboratory technique has not been determined. The purpose of this study was to quantify agreement in body fat percentages between the Army's circumference measures (taping) and dual-energy X-ray absorptiometry (DXA); second to determine categorical agreement between height-weight tables and DXA. Male Reserve Officer Training Corps (R.O.T.C.) cadets (N = 23; 20.6 ± 1.6 years, 179.1 ± 6.6 cm; 81.4 ± 10.3 kg) were taped according to Army protocol to predict body fat. The % body fat prediction was compared with DXA through a Bland-Altman Plot with ±2-4% body fat established as a zone of agreement (ZOA). Thirteen out of 23 cadets fell outside the ZOA. No cadet was over the compliance threshold (20-22% fat) using the tape method, however, with DXA, 7 out of 23 cadets were noncompliant. Height-weight tables provided a moderate level of categorical agreement with DXA. The results depict poor agreement between taping and DXA, as taping generally underestimated % body fat. Compared with taping, height-weight tables were better able to identify excess fat weight.

  9. Predicting human height by Victorian and genomic methods

    NARCIS (Netherlands)

    Y.S. Aulchenko (Yurii); M.V. Struchalin (Maksim); N.M. Belonogova (Nadezhda); T.I. Axenovich (Tatiana); M.N. Weedon (Michael); A. Hofman (Albert); A.G. Uitterlinden (André); M.H. Kayser (Manfred); B.A. Oostra (Ben); P. Tikka-Kleemola (Päivi); A.C.J.W. Janssens (Cécile); P.M. Borodin (Pavel)

    2009-01-01

    textabstractIn the Victorian era, Sir Francis Galton showed that 'when dealing with the transmission of stature from parents to children, the average height of the two parents, ... is all we need care to know about them' (1886). One hundred and twenty-two years after Galton's work was published, 54

  10. The Analysis of Height System Definition and the High Precision GNSS Replacing Leveling Method

    Directory of Open Access Journals (Sweden)

    ZHANG Chuanyin

    2017-08-01

    Full Text Available Based on the definition of height system, the gravitational equipotential property of height datum surface is discussed in this paper, differences of the heights at ground points that defined in different height systems are tested and analyzed as well. A new method for replacing leveling using GNSS is proposed to ensure the consistency between GNSS replacing leveling and spirit leveling at mm accuracy level. The main conclusions include:①For determining normal height at centimeter accuracy level, the datum surface of normal height should be the geoid. The 1985 national height datum of China adopts normal height system, its datum surface is the geoid passing the Qingdao zero point.②The surface of equi-orthometric height in the near earth space is parallel to the geoid. The combination of GNSS precise positioning and geoid model can be directly used for orthometric height determination. However, the normal height system is more advantageous for describing the terrain and relief.③Based on the proposed method of GNSS replacing leveling, the errors in geodetic height affect more on normal height result than the errors of geoid model, the former is about 1.5 times of the latter.

  11. Weight-to-height ratio and aerobic capacity in 15-year-old male taekwondo martial artists.

    Science.gov (United States)

    Poliszczuk, Tatiana; Jankowska, Ewa; Poliszczuk, Dmytro

    2013-01-01

    Martial arts are growing in popularity throughout the whole world. Their beneficial influence on physical development and fitness is noteworthy. Martial arts are an attractive form of physical recreation, constitute a perfect means for combating stress, and have a positive effect on general health, including during rehabilitation. The aim of this study is to assess physical development and aerobic capacity in boys who practice taekwondo and to determine the relationships between results of a fitness test and particular parameters of physical development. Study participants comparised 51 boys aged 15 years who practiced taekwondo (with training experience ranging from 1 to 6 years). Volkov´s modification of the Harvard Step Test was used to assess body height and body mass. BMI was also calculated. Centile charts were used to assess weight-to-height ratio and the level of measured parameters. BMI was analyzed according to the Cole classification system. Dispersion was calculated using a coefficient of variation. The Pearson product-moment correlation coefficient between selected parameters was also calculated. Most study participants had normal BMI, but 30% showed overweight and 13% showed underweight or emaciation. Weight-to-height ratio differed significantly from the norm in 33% of the boys when compared to centile charts. All participants had average aerobic capacity. However, when weight-to-height ratio was compared to the results of the Harvard Step Test, boys with normal body proportions performed much better in the test than boys with abnormal body mass (p<0.05). Study participants showed abnormal weight-to-height ratio mainly in terms of overweight. The boys had greater body height and body mass compared to the general Polish population. Aerobic capacity differed considerably between participants.

  12. Challenging the role of social norms regarding body weight as an explanation for weight, height, and BMI misreporting biases: Development and application of a new approach to examining misreporting and misclassification bias in surveys

    LENUS (Irish Health Repository)

    Brestoff, Jonathan R

    2011-05-18

    Abstract Background Cultural pressures to be thin and tall are postulated to cause people to misreport their body weight and height towards more socially normative (i.e., desirable) values, but a paucity of direct evidence supports this idea. We developed a novel non-linear approach to examining weight, height, and BMI misreporting biases and used this approach to examine the association between socially non-normative weight and misreporting biases in adults. Methods The Survey of Lifestyles, Attitudes, and Nutrition 2007 (SLÁN 2007), a nationally representative survey of the Republic of Ireland (N = 1942 analyzed) was used. Self-reported weight (height) was classified as under-reported by ≥2.0 kg (2.0 cm), over-reported by ≥2.0 kg (2.0 cm), or accurately reported within 2.0 kg (2.0 cm) to account for technical errors of measurement and short-term fluctuations in measured weight (height). A simulation strategy was used to define self-report-based BMI as under-estimated by more than 1.40 kg\\/m2, over-estimated by more than 1.40 kg\\/m2, or accurately estimated within 1.40 kg\\/m2. Patterns of biases in self-reported weight, height, and BMI were explored. Logistic regression was used to identify factors associated with mis-estimated BMI and to calculate adjusted odds ratios (AOR) and 99% confidence intervals (99%CI). Results The patterns of bias contributing the most to BMI mis-estimation were consistently, in decreasing order of influence, (1) under-reported weight combined with over-reported height, (2) under-reported weight with accurately reported height, and (3) accurately reported weight with over-reported height. Average bias in self-report-based BMI was -1.34 kg\\/m2 overall and -0.49, -1.33, and -2.66 kg\\/m2 in normal, overweight, and obese categories, respectively. Despite the increasing degree of bias with progressively higher BMI categories, persons describing themselves as too heavy were, within any given BMI category, less likely to have under

  13. A method of estimating log weights.

    Science.gov (United States)

    Charles N. Mann; Hilton H. Lysons

    1972-01-01

    This paper presents a practical method of estimating the weights of logs before they are yarded. Knowledge of log weights is required to achieve optimum loading of modern yarding equipment. Truckloads of logs are weighed and measured to obtain a local density index (pounds per cubic foot) for a species of logs. The density index is then used to estimate the weights of...

  14. Weight, height, body mass index and risk of breast cancer in postmenopausal women: a case-control study

    Directory of Open Access Journals (Sweden)

    Vahdaninia Mariam

    2008-09-01

    Full Text Available Abstract Background Many women in Iran have a relatively high body mass index. To investigate whether the condition contributes to excess breast cancer cases, a case-control study was conducted to assess the relationships between anthropometric variables and breast cancer risk in Tehran, Iran. Methods All incident cases of breast cancer in the Iranian Centre for Breast Cancer (ICBC were identified through the case records. Eligible cases were all postmenopausal women with histological confirmed diagnosis of breast cancer during 1996 to year 2000. Controls were randomly selected postmenopausal women attending the ICBC for clinical breast examination during the same period. The body mass index (BMI was calculated based on weights and heights as measured by the ICBC nursing staff. Both tests for trend and logistic regression analysis were performed to calculate odds ratios and 95% confidence intervals as measures of relative risk. Results In all, 116 breast cancer cases and 116 controls were studied. There were no significant differences between cases and control with regard to most independent variables studied. However, a significant difference was observed between cases and controls indicating that the mean BMI was higher in cases as compared to controls (P = 0.004. Performing logistic regression analysis while controlling for age, age at menopause, family history of breast cancer and parity, the results showed that women with a BMI in the obese range had a three fold increased risk of breast cancer [odds ratio (OR = 3.21, 95% confidence interval (CI: 1.15–8.47]. Conclusion The results suggest that obesity in postmenopausal women could increase risk of breast cancer and it merits further investigation in populations such as Iran where it seems that many women are short in height, and have a relatively high body mass index.

  15. The validity of self-reported vs. measured body weight and height and the effect of self-perception.

    Science.gov (United States)

    Gokler, Mehmet Enes; Bugrul, Necati; Sarı, Ahu Ozturk; Metintas, Selma

    2018-01-01

    The objective was to assess the validity of self-reported body weight and height and the possible influence of self-perception of body mass index (BMI) status on the actual BMI during the adolescent period. This cross sectional study was conducted on 3918 high school students. Accurate BMI perception occurred when the student's self-perception of their BMI status did not differ from their actual BMI based on measured height and weight. Agreement between the measured and self-reported body height and weight and BMI values was determined using the Bland-Altman metod. To determine the effects of "a good level of agreement", hierarchical logistic regression models were used. Among male students who reported their BMI in the normal region, 2.8% were measured as overweight while 0.6% of them were measured as obese. For females in the same group, these percentages were 1.3% and 0.4% respectively. Among male students who perceived their BMI in the normal region, 8.5% were measured as overweight while 0.4% of them were measured as obese. For females these percentages were 25.6% and 1.8% respectively. According to logistic regression analysis, residence and accurate BMI perception were significantly associated with "good agreement" ( p ≤ 0.001). The results of this study demonstrated that in determining obesity and overweight statuses, non-accurate weight perception is a potential risk for students.

  16. Hip fracture and anthropometric variations: dominance among trochanteric soft tissue thickness, body height and body weight during sideways fall.

    Science.gov (United States)

    Majumder, Santanu; Roychowdhury, Amit; Pal, Subrata

    2013-01-01

    Hip fracture depends on various anthropometric parameters such as trochanteric soft tissue thickness, body height and body weight. The objective was to evaluate the responses to the variations in anthropometric parameters during sideways fall, and to identify the most dominant parameter among them. Seven finite element models were developed having anthropometric variations in trochanteric soft tissue thickness (5-26 mm), body height (1.70-1.88 m), and body weight (63-93.37 kg). These were simulated for sideways fall with ANSYS-LS-DYNA® code. Significant effect of trochanteric soft tissue thickness variation was found on 'normalized peak impact force with respect to the body weight' (p=0.004, r²=0.808) and strain ratio (p=0.083, r²=0.829). But, variation in body height was found to be less significant on normalized peak impact force (p=0.478, r²=0.105) and strain ratio (p=0.292, r²=0.217). Same was true for the variation in body weight on normalized peak impact force (p=0.075, r²=0.456) and strain ratio (p=0.857, r²=0.007). The risk factor for fracture was also well correlated to the strain ratio for the inter-trochanteric zone (pfractures are clinically observed to happen. Trochanteric soft tissue thickness was found likely to be the most dominant parameter over body height and body weight, signifying that a slimmer elderly person, taller or shorter, with less trochanteric soft tissue thickness should be advised to take preventive measures against hip fracture under sideways fall. © 2013.

  17. Parents of elementary school students weigh in on height, weight, and body mass index screening at school.

    Science.gov (United States)

    Kubik, Martha Y; Fulkerson, Jayne A; Story, Mary; Rieland, Gayle

    2006-12-01

    School-based body mass index (BMI) screening and parent notification programs have been recommended as a childhood overweight prevention strategy. However, there are little empirical data available to guide decision making about the acceptability and safety of programs. A pilot study was conducted using a quasiexperimental research design. In fall 2004, children in 4 suburban elementary schools (kindergarten to sixth grade) in the St Paul/Minneapolis, MN, metropolitan area completed height/weight screening. The following spring, parents in 2 schools received letters containing height/weight and BMI results. A self-administered post-only survey examined parents' opinions and beliefs regarding school-based BMI screening and parent notification programs (response rate: 790/1133 = 70%). The chi2 test of significance was used to examine differences in program support by treatment condition, child's weight status, and sociodemographic characteristics. Among all parents, 78% believed it was important for schools to assess student's height/weight annually and wanted to receive height, weight, and BMI information yearly. Among parents receiving the letter, 95% read most/all of the letter. Most parents (80%) and children (83%) reported comfort with the information in the letter. Parents of overweight children were more likely to report parental discomfort as well as child discomfort with letter content. There was considerable parental support for school-based BMI screening and parent notification programs. Programs may be a useful overweight prevention tool for children. However, continued attention to how best to support parents and children affected by overweight is required.

  18. Scaling of adult body weight to height across sex and race/ethnic groups: relevance to BMI.

    Science.gov (United States)

    Heymsfield, Steven B; Peterson, Courtney M; Thomas, Diana M; Heo, Moonseong; Schuna, John M; Hong, Sangmo; Choi, Woong

    2014-12-01

    Body mass index (BMI) is formulated on the assumption that body weight (BW) scales to height with a power of 2 (BW∝height(2)), independent of sex and race-ethnicity. Powers differing from 2 are observed in studies of selected samples, thus raising the question if BMI is a generalizable metric that makes BW independent of height across populations. The objectives were to test the hypothesis that adult BW scales to height with a power of 2 independent of sex and race-ethnicity and to advance an understanding of BMI as a measure of shape by extending allometric analyses to waist circumference (WC). We conducted cross-sectional subject evaluations, including body composition, from the NHANES and the Korean NHANES (KNHANES). Variations of the allometric model (Y = αX(β)) were used to establish height scaling powers (β ± SE) across non-Hispanic white and black, Mexican American, and Korean men and women. Exploratory analyses in population samples established age and adiposity as important independent determinants of height scaling powers (i.e., β). After age and adiposity in the next series of analyses were controlled for, BW scaling powers were nonsignificantly different between race/ethnic groups within each sex group; WC findings were similar in women, whereas small but significant between-race differences were observed in the men. Sex differences in β values were nonsignificant except for BW in non-Hispanic blacks and WC in Koreans (P ethnic groups, an observation that makes BMI a generalizable height-independent measure of shape across most populations. WC also follows generalizable scaling rules, a finding that has implications for defining body shape in populations who differ in stature. © 2014 American Society for Nutrition.

  19. Method and system for progressive mesh storage and reconstruction using wavelet-encoded height fields

    Science.gov (United States)

    Baxes, Gregory A. (Inventor); Linger, Timothy C. (Inventor)

    2011-01-01

    Systems and methods are provided for progressive mesh storage and reconstruction using wavelet-encoded height fields. A method for progressive mesh storage includes reading raster height field data, and processing the raster height field data with a discrete wavelet transform to generate wavelet-encoded height fields. In another embodiment, a method for progressive mesh storage includes reading texture map data, and processing the texture map data with a discrete wavelet transform to generate wavelet-encoded texture map fields. A method for reconstructing a progressive mesh from wavelet-encoded height field data includes determining terrain blocks, and a level of detail required for each terrain block, based upon a viewpoint. Triangle strip constructs are generated from vertices of the terrain blocks, and an image is rendered utilizing the triangle strip constructs. Software products that implement these methods are provided.

  20. The 2014 Danish references from birth to 20 years for height, weight and body mass index

    DEFF Research Database (Denmark)

    Tinggaard, Jeanette; Aksglaede, Lise; Sørensen, Kaspar

    2014-01-01

    in body mass index (BMI) above median levels was found. Reference curves for height were superimposable with standard curves based on the selective WHO criteria. Danish children were longer/taller and heavier and they had larger head circumferences than those reported in the recent multiethnic WHO...

  1. New loci associated with birth weight identify genetic links between intrauterine growth and adult height and metabolism

    DEFF Research Database (Denmark)

    Horikoshi, Momoko; Yaghootkar, Hanieh; Mook-Kanamori, Dennis O

    2013-01-01

    -wide significance to 7, accounting for a similar proportion of variance as maternal smoking. Five of the loci are known to be associated with other phenotypes: ADCY5 and CDKAL1 with type 2 diabetes, ADRB1 with adult blood pressure and HMGA2 and LCORL with adult height. Our findings highlight genetic links between...... diabetes and a second variant, near CCNL1, with no obvious link to adult traits. In an expanded genome-wide association meta-analysis and follow-up study of birth weight (of up to 69,308 individuals of European descent from 43 studies), we have now extended the number of loci associated at genome......Birth weight within the normal range is associated with a variety of adult-onset diseases, but the mechanisms behind these associations are poorly understood. Previous genome-wide association studies of birth weight identified a variant in the ADCY5 gene associated both with birth weight and type 2...

  2. MATERNAL HEIGHT AND PRE-PREGNANCY WEIGHT STATUS ARE ASSOCIATED WITH FETAL GROWTH PATTERNS AND NEWBORN SIZE.

    Science.gov (United States)

    Pölzlberger, Eva; Hartmann, Beda; Hafner, Erich; Stümpflein, Ingrid; Kirchengast, Sylvia

    2017-05-01

    The impact of maternal height, pre-pregnancy weight status and gestational weight gain on fetal growth patterns and newborn size was analysed using a dataset of 4261 singleton term births taking place at the Viennese Danube Hospital between 2005 and 2013. Fetal growth patterns were reconstructed from three ultrasound examinations carried out at the 11th/12th, 20th/21th and 32th/33th weeks of gestation. Crown-rump length, biparietal diameter, fronto-occipital diameter, head circumference, abdominal transverse diameter, abdominal anterior-posterior diameter, abdominal circumference and femur length were determined. Birth weight, birth length and head circumference were measured immediately after birth. The vast majority of newborns were of normal weight, i.e. between 2500 and 4000 g. Maternal height showed a just-significant but weak positive association (r=0.03: p=0.039) with crown-rump length at the first trimester and with the majority of fetal parameters at the second trimester (r>0.06; p0.09; p0.08; p0.17; p0.13; p0.13; pnewborn size. Some of these associations were quite weak and the statistical significance was mainly due to the large sample size. The association patterns between maternal height and pre-pregnancy weight status with fetal growth patterns (pnewborn size (p<0.001), were independent of maternal age, nicotine consumption and fetal sex. In general, taller and heavier women gave birth to larger infants. This association between maternal size and fetal growth patterns was detectable from the first trimester onwards.

  3. The effect of low birth weight on height, weight and behavioral outcomes in the medium-run

    DEFF Research Database (Denmark)

    Datta Gupta, Nabanita; Deding, Mette; Lausten, Mette

    2013-01-01

    as physical growth at ages 6 months, 3½, 7½ and 11 years using data from the Danish Longitudinal Survey of Children. Observing the same children at different points in time enabled us to chart the evolution of anthropometric and behavioral deficits among children born with low birth weight and helped......A number of studies have documented negative long term effects of low birth weight. Yet, not much is known about the dynamics of the process leading to adverse health and educational outcomes in the long run. While previous studies focusing mainly on LBW effects on physical growth and cognitive...... outcomes have found effects of the same size at both school age and young adulthood, others have found a diminishing negative effect over time. The purpose of this paper was to bring new evidence to this issue by analyzing the medium run effects of low birth weight on child behavioral outcomes as well...

  4. Reporting the methodology of height and weight acquisition in studies of body mass index-based prognosis in critically ill patients.

    Science.gov (United States)

    Oud, Lavi

    2013-10-01

    Conflicting findings were reported on the body mass index (BMI)-based prognosis of critically patients. Errors in source weight and height data can confound BMI group allocation. The aim of the present work was to examine investigators' reporting on the methods of height and weight acquisition (HWA). PubMed and Embase databases were searched for studies describing BMI group-based risk of death in critically ill patients. Eligible studies were examined for reporting on (1) the use of measured and/or estimated HWA, (2) details of measuring devices, (3) device accuracy, and (4) methods of adjustment for acute and chronic fluid-related weight changes. Thirty studies met the eligibility criteria, including 159,565 patients. No data were provided in 13 studies (52% of reported patients) on whether estimates or measurements were used for HWA. Measured HWA was used exclusively in 6 studies (3% of patients), and an unspecified combination of estimated and/or measured HWA was reported for the remainder. Only 1 study reported the specific devices used. None of the studies provided data on the bias and precision of measuring devices. Adjustment for chronic and/or acute fluid-related weight changes was addressed in 2 studies for each. These findings demonstrate the prevalent risk for BMI group misallocation in the reviewed studies, which may confound BMI-based prognosis, raising concerns about the validity of reported BMI-related prognostic impact. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. Iterative methods for weighted least-squares

    Energy Technology Data Exchange (ETDEWEB)

    Bobrovnikova, E.Y.; Vavasis, S.A. [Cornell Univ., Ithaca, NY (United States)

    1996-12-31

    A weighted least-squares problem with a very ill-conditioned weight matrix arises in many applications. Because of round-off errors, the standard conjugate gradient method for solving this system does not give the correct answer even after n iterations. In this paper we propose an iterative algorithm based on a new type of reorthogonalization that converges to the solution.

  6. New Finnish growth references for children and adolescents aged 0 to 20 years: Length/height-for-age, weight-for-length/height, and body mass index-for-age.

    Science.gov (United States)

    Saari, Antti; Sankilampi, Ulla; Hannila, Marja-Leena; Kiviniemi, Vesa; Kesseli, Kari; Dunkel, Leo

    2011-05-01

    Growth curves require regular updates due to secular trends in linear growth. We constructed contemporary growth curves, assessed secular trends in height, and defined body mass index (BMI) cut-off points for thinness, overweight, and obesity in Finnish children. Mixed cross-sectional/longitudinal data of 73,659 healthy subjects aged 0-20 years (born 1983-2008) were collected from providers in the primary health care setting. Growth references for length/height-for-age, weight-for-length/height, and BMI-for-age were fitted using generalized additive models for location, scale, and shape (GAMLSS). BMI percentile curves passing through BMIs 30, 25, 18.5, 17, and 16 kg/m(2) at the age of 18 years were calculated to define limits for obesity, overweight, and various grades of thinness. Increased length/height-for-age was seen in virtually all age-groups when compared to previous Finnish growth data from 1959 to 1971. Adult height was increased by 1.9 cm in girls and 1.8 cm in boys. The largest increases were seen during the peripubertal years: up to 2.8 cm in girls and 5.6 cm in boys. Median weight-for-length/height had not increased. New Finnish references for length/height-for-age, weight-for-length/height, and BMI-for-age were constructed and should be implemented to monitor growth of children in Finland.

  7. Accuracy and usefulness of BMI measures based on self-reported weight and height: findings from the NHANES & NHIS 2001-2006

    Directory of Open Access Journals (Sweden)

    Schoenborn Charlotte A

    2009-11-01

    Full Text Available Abstract Background The Body Mass Index (BMI based on self-reported height and weight ("self-reported BMI" in epidemiologic studies is subject to measurement error. However, because of the ease and efficiency in gathering height and weight information through interviews, it remains important to assess the extent of error present in self-reported BMI measures and to explore possible adjustment factors as well as valid uses of such self-reported measures. Methods Using the combined 2001-2006 data from the continuous National Health and Nutrition Examination Survey, discrepancies between BMI measures based on self-reported and physical height and weight measures are estimated and socio-demographic predictors of such discrepancies are identified. Employing adjustments derived from the socio-demographic predictors, the self-reported measures of height and weight in the 2001-2006 National Health Interview Survey are used for population estimates of overweight & obesity as well as the prediction of health risks associated with large BMI values. The analysis relies on two-way frequency tables as well as linear and logistic regression models. All point and variance estimates take into account the complex survey design of the studies involved. Results Self-reported BMI values tend to overestimate measured BMI values at the low end of the BMI scale ( 28. The discrepancies also vary systematically with age (younger and older respondents underestimate their BMI more than respondents aged 42-55, gender and the ethnic/racial background of the respondents. BMI scores, adjusted for socio-demographic characteristics of the respondents, tend to narrow, but do not eliminate misclassification of obese people as merely overweight, but health risk estimates associated with variations in BMI values are virtually the same, whether based on self-report or measured BMI values. Conclusion BMI values based on self-reported height and weight, if corrected for biases

  8. Comparable effects of 1800- and 2400-rad (18- and 24-Gy) cranial irradiation on height and weight in children treated for acute lymphocytic leukemia

    International Nuclear Information System (INIS)

    Starceski, P.J.; Lee, P.A.; Blatt, J.; Finegold, D.; Brown, D.

    1987-01-01

    To examine the effects of low-dose cranial irradiation on growth and to determine if one can predict patients in whom growth will be most affected, we studied 47 children with acute lymphocytic leukemia who had been treated with 2400 rad (24 Gy), 1800 rad (18 Gy), or no whole-brain irradiation. Serial measurements of height, weight, and weight for height were obtained by retrospective chart review. The effects of 1800 rad (18 Gy) and 2400 rad (24 Gy) treatment were indistinguishable. Height percentiles among irradiated patients decreased by a mean of 12% six months after diagnosis, and growth generally did not catch up. Moreover, although 33 irradiated patients maintained heights within the normal range, In 11 patients (33%) a dramatic falloff occurred such that by three years following diagnosis their height for age was more than 30 percentiles below the original value. These patients were all identifiable at six months since their height percentiles had already decreased by more than 15%. Although weight percentiles did not change following irradiation, the weight-for-height ratio increased and patients were relatively stockier three years after therapy than they had been at diagnosis. In patients who had received chemotherapy alone, the weight-for-height ratio also increased, but this appeared to be due to a disproportionate increase in weight. Longer follow-up and evaluation of larger cohorts of patients treated with 1800 rad (18 Gy) will be needed to confirm these results

  9. Augmenting Ordinal Methods of Attribute Weight Approximation

    DEFF Research Database (Denmark)

    Daneilson, Mats; Ekenberg, Love; He, Ying

    2014-01-01

    of the obstacles and methods for introducing so-called surrogate weights have proliferated in the form of ordinal ranking methods for criteria weights. Considering the decision quality, one main problem is that the input information allowed in ordinal methods is sometimes too restricted. At the same time, decision...... makers often possess more background information, for example, regarding the relative strengths of the criteria, and might want to use that. We propose combined methods for facilitating the elicitation process and show how this provides a way to use partial information from the strength of preference...

  10. The reliability of in-home measures of height and weight in large cohort studies: Evidence from Add Health

    Directory of Open Access Journals (Sweden)

    Jon Hussey

    2015-05-01

    Full Text Available Background: With the emergence of obesity as a global health issue, an increasing number of major demographic surveys are collecting measured anthropometric data. Yet little is known about the characteristics and reliability of these data. Objective: We evaluate the accuracy and reliability of anthropometric data collected in the home during Wave IV of the National Longitudinal Study of Adolescent to Adult Health (Add Health, compare our estimates to national standard, clinic-based estimates from the National Health and Nutrition Examination Survey (NHANES and, using both sources, provide a detailed anthropometric description of young adults in the United States. Methods: The reliability of Add Health in-home anthropometric measures was estimated from repeat examinations of a random subsample of study participants. A digit preference analysis evaluated the quality of anthropometric data recorded by field interviewers. The adjusted odds of obesity and central obesity in Add Health vs. NHANES were estimated with logistic regression. Results: Short-term reliabilities of in-home measures of height, weight, waist and arm circumference - as well as derived body mass index (BMI, kg/m2 - were excellent. Prevalence of obesity (37Š vs. 29Š and central obesity (47Š vs. 38Š was higher in Add Health than in NHANES, while socio-demographic patterns of obesity and central obesity were comparable in the two studies. Conclusions: Properly trained non-medical field interviewers can collect reliable anthropometric data in a nationwide, home visit study. This national cohort of young adults in the United States faces a high risk of early-onset chronic disease and premature mortality.

  11. Simple traits among diaspore weight/number, plant height and an ability to vegetative propagation

    Czech Academy of Sciences Publication Activity Database

    Šerá, Božena

    2008-01-01

    Roč. 50, č. 12 (2008), s. 1563-1569 ISSN 1672-9072 R&D Projects: GA MŠk(CZ) 1P05OC049 Institutional research plan: CEZ:AV0Z60870520 Keywords : comparison * lateral spread * reproduction * seed production * seed weight * strategy * trade-off Subject RIV: EF - Botanics Impact factor: 0.859, year: 2008

  12. Birth weight, childhood body mass index, and height in relation to mammographic density and breast cancer

    DEFF Research Database (Denmark)

    Andersen, Zorana Jovanovic; Baker, Jennifer Lyn; Bihrmann, Kristine

    2014-01-01

    High breast density, a strong predictor of breast cancer may be determined early in life. Childhood anthropometric factors have been related to breast cancer and breast density, but rarely simultaneously. We examined whether mammographic density (MD) mediates an association of birth weight, child...

  13. [Height and weight growth delay and protein-energy malnutrition in children with chronic dialysis].

    Science.gov (United States)

    Perţea, L; Diaconeasa, Lavinia; Burlea, M; Munteanu, Mihaela; Brumariu, O

    2010-01-01

    Growth retardation is an important problem in children with chronic renal disease, and malnutrition is a determinative factor. The study intends to assess the relationship between protein-energy malnutrition and stature-weight retardation in children enrolled in chronic dialysis program. The study group was composed of 16 children (5 boys and 11 girls--sex ratio of 2.2) hospitalized in the IVth Nephrology Clinic at Clinical Emergency Hospital "St. Maria" Iaşi, 13 rural and 3 urban, aged between 9 and 17 years, with chronic dialysis program. This was a follow-up study during a period of 4 years (2006-2009), resulting in correlations between anthropometric paremeters, biochemical, BIA and DEXA data. The stature-weight deficiency of the 16 patients was as follows: after an average period of 61.7 months of HD and 32.7 months of PD, in children older than 12 years (mean age 15.27 years), 7 of 10 had stature-weight deficits higher than (-3DS) or (-4DS). The group with less than (-2DS) stature-weight deficits showed the same mean age of 15.2 years, the protein energy-malnutrition was present in 2 cases (33%) and was attributed to a dialysis period shorter than 13.8 months. The late diagnosis of the disease (at an average age of 13 years), the long period of chronic dialysis program (over 39.5 months on average) and the early debut of malnutrition are favoring or worsening factors of stature-weight retardation. After correlating ESG with biochemical, BIA and DEXA data, in our group were identified 4 cases of moderate malnutrition and 9 cases of severe malnutrition.

  14. Comparison of height-diameter models based on geographically weighted regressions and linear mixed modelling applied to large scale forest inventory data

    Energy Technology Data Exchange (ETDEWEB)

    Quirós Segovia, M.; Condés Ruiz, S.; Drápela, K.

    2016-07-01

    Aim of the study: The main objective of this study was to test Geographically Weighted Regression (GWR) for developing height-diameter curves for forests on a large scale and to compare it with Linear Mixed Models (LMM). Area of study: Monospecific stands of Pinus halepensis Mill. located in the region of Murcia (Southeast Spain). Materials and Methods: The dataset consisted of 230 sample plots (2582 trees) from the Third Spanish National Forest Inventory (SNFI) randomly split into training data (152 plots) and validation data (78 plots). Two different methodologies were used for modelling local (Petterson) and generalized height-diameter relationships (Cañadas I): GWR, with different bandwidths, and linear mixed models. Finally, the quality of the estimated models was compared throughout statistical analysis. Main results: In general, both LMM and GWR provide better prediction capability when applied to a generalized height-diameter function than when applied to a local one, with R2 values increasing from around 0.6 to 0.7 in the model validation. Bias and RMSE were also lower for the generalized function. However, error analysis showed that there were no large differences between these two methodologies, evidencing that GWR provides results which are as good as the more frequently used LMM methodology, at least when no additional measurements are available for calibrating. Research highlights: GWR is a type of spatial analysis for exploring spatially heterogeneous processes. GWR can model spatial variation in tree height-diameter relationship and its regression quality is comparable to LMM. The advantage of GWR over LMM is the possibility to determine the spatial location of every parameter without additional measurements. Abbreviations: GWR (Geographically Weighted Regression); LMM (Linear Mixed Model); SNFI (Spanish National Forest Inventory). (Author)

  15. Source of parental reports of child height and weight during phone interviews and influence on obesity prevalence estimates among children aged 3-17 years.

    Science.gov (United States)

    Skinner, Asheley Cockrell; Miles, Donna; Perrin, Eliana M; Coyne-Beasley, Tamera; Ford, Carol

    2013-01-01

    We compared parental reports of children's height and weight when the values were estimated vs. parent-measured to determine how these reports influence the estimated prevalence of childhood obesity. In the 2007 and 2008 North Carolina Child Health Assessment and Monitoring Program surveys, parents reported height and weight for children aged 3-17 years. When parents reported the values were not measured (by doctor, school, or home), they were asked to measure their child and were later called back. We categorized body mass index status using standard CDC definitions, and we used Chi-square tests and the Stuart-Maxwell test of marginal homogeneity to examine reporting differences. About 80% (n=509) of the 638 parents who reported an unmeasured height and/or weight participated in a callback and provided updated measures. Children originally classified as obese were subsequently classified as obese (67%), overweight (13%), and healthy weight (19%). An estimated 28% of younger children (children (aged ≥10 years) were reclassified on callback. Having parents who guessed the height and weight of their children and then reported updated values did not significantly change the overall population estimates of obesity. Our findings demonstrate that using parent-reported height and weight values may be sufficient to provide reasonable estimates of obesity prevalence. Systematically asking the source of height and weight information may help improve how it is applied to research of the prevalence of childhood obesity when gold-standard measurements are not available.

  16. A Prospective Study of Height and Body Mass Index in Childhood, Birth Weight, and Risk of Adult Glioma Over 40 Years of Follow-up

    DEFF Research Database (Denmark)

    Kitahara, Cari M; Gamborg, Michael; Rajaraman, Preetha

    2014-01-01

    Greater attained height and greater body mass index (BMI; weight (kg)/height (m)(2)) in young adulthood have been associated with glioma risk, but few studies have investigated the association with body size at birth or during childhood, when the brain undergoes rapid cell growth...

  17. Relative importance of expertise, lifting height and weight lifted on posture and lumbar external loading during a transfer task in manual material handling.

    Science.gov (United States)

    Plamondon, André; Larivière, Christian; Delisle, Alain; Denis, Denys; Gagnon, Denis

    2012-01-01

    The objective of this study was to measure the effect size of three important factors in manual material handling, namely expertise, lifting height and weight lifted. The effect of expertise was evaluated by contrasting 15 expert and 15 novice handlers, the effect of the weight lifted with a 15-kg box and a 23-kg box and the effect of lifting height with two different box heights: ground level and a 32 cm height. The task consisted of transferring a series of boxes from a conveyor to a hand trolley. Lifting height and weight lifted had more effect size than expertise on external back loading variables (moments) while expertise had low impact. On the other hand, expertise showed a significant effect of posture variables on the lumbar spine and knees. All three factors are important, but for a reduction of external back loading, the focus should be on the lifting height and weight lifted. The objective was to measure the effect size of three important factors in a transfer of boxes from a conveyor to a hand trolley. Lifting height and weight lifted had more effect size than expertise on external back loading variables but expertise was a major determinant in back posture.

  18. Impact of micronutrients sprinkle on weight and height of children aged 6-36 months in Tonk district of Rajasthan state

    Directory of Open Access Journals (Sweden)

    Vijay Jyoti

    2014-12-01

    Full Text Available Introduction: In India, multiple micronutrient deficiencies continue to be a major public health problem, especially for children below three years of age. It is a crucial period for the growth and development of children. There is lack of data from Rajasthan state on the effect of micronutrients supplementation on growth of children below three years of age. Aims & Objectives: To assess the impact of ICDS supplementary food with or without micronutrients sprinkles on weight and height of children aged 6-36 months in the Tonk district, Rajasthan state. Materials & Methods: The trial was conducted in the 15 Angan wadi centers, each from Tonk (rural and Malpura blocks of Tonk District in Rajasthan state. Children from both blocks were considered as experimental and control groups. Experimental (N=790 and Control groups (N=540 received ICDS supplementary food for six months with or without micronutrients sprinkles. Anthropometric measurements were taken using standard techniques. Results: At baseline, children with severe underweight, severe stunting and severe wasting in experimental group stood at 19.2%, 19.3%, 7.3%, respectively, which declined to 14.9%, 15.3% and 6.3%, after intervention. Significant difference was observed in the mean weights of post intervention children between experimental and control groups, whereas, there was no significant difference in mean heights. In experimental group, statistical significant difference was also noted in the mean weights and heights of children between pre and post intervention periods. Conclusion: Micronutrients sprinkles can be effective in reducing malnutrition amongst vulnerable population.

  19. Socioeconomic inequalities in childhood and adolescent body-mass index, weight, and height from 1953 to 2015: an analysis of four longitudinal, observational, British birth cohort studies

    Directory of Open Access Journals (Sweden)

    David Bann, PhD

    2018-04-01

    Full Text Available Summary: Background: Socioeconomic inequalities in childhood body-mass index (BMI have been documented in high-income countries; however, uncertainty exists with regard to how they have changed over time, how inequalities in the composite parts (ie, weight and height of BMI have changed, and whether inequalities differ in magnitude across the outcome distribution. Therefore, we aimed to investigate how socioeconomic inequalities in childhood and adolescent weight, height, and BMI have changed over time in Britain. Methods: We used data from four British longitudinal, observational, birth cohort studies: the 1946 Medical Research Council National Survey of Health and Development (1946 NSHD, 1958 National Child Development Study (1958 NCDS, 1970 British Cohort Study (1970 BCS, and 2001 Millennium Cohort Study (2001 MCS. BMI (kg/m2 was derived in each study from measured weight and height. Childhood socioeconomic position was indicated by the father's occupational social class, measured at the ages of 10–11 years. We examined associations between childhood socioeconomic position and anthropometric outcomes at age 7 years, 11 years, and 15 years to assess socioeconomic inequalities in each cohort using gender-adjusted linear regression models. We also used multilevel models to examine whether these inequalities widened or narrowed from childhood to adolescence, and quantile regression was used to examine whether the magnitude of inequalities differed across the outcome distribution. Findings: In England, Scotland, and Wales, 5362 singleton births were enrolled in 1946, 17 202 in 1958, 17 290 in 1970, and 16 404 in 2001. Low socioeconomic position was associated with lower weight at childhood and adolescent in the earlier-born cohorts (1946–70, but with higher weight in the 2001 MCS cohort. Weight disparities became larger from childhood to adolescence in the 2001 MCS but not the earlier-born cohorts (pinteraction=0·001. Low socioeconomic

  20. WHO European Childhood Obesity Surveillance Initiative 2008: weight, height and body mass index in 6-9-year-old children.

    LENUS (Irish Health Repository)

    Wijnhoven, T M A

    2012-09-21

    What is already known about this subject Overweight and obesity prevalence estimates among children based on International Obesity Task Force definitions are substantially lower than estimates based on World Health Organization definitions. Presence of a north-south gradient with the highest level of overweight found in southern European countries. Intercountry comparisons of overweight and obesity in primary-school children in Europe based on measured data lack a similar data collection protocol. What this study adds Unique dataset on overweight and obesity based on measured weights and heights in 6-9-year-old children from 12 European countries using a harmonized surveillance methodology. Because of the use of a consistent data collection protocol, it is possible to perform valid multiple comparisons between countries. It demonstrates wide variations in overweight and obesity prevalence estimates among primary-school children between European countries and regions. BACKGROUND: Nutritional surveillance in school-age children, using measured weight and height, is not common in the European Region of the World Health Organization (WHO). The WHO Regional Office for Europe has therefore initiated the WHO European Childhood Obesity Surveillance Initiative. OBJECTIVE: To present the anthropometric results of data collected in 2007\\/2008 and to investigate whether there exist differences across countries and between the sexes. METHODS: Weight and height were measured in 6-9-year-old children in 12 countries. Prevalence of overweight, obesity, stunting, thinness and underweight as well as mean Z-scores of anthropometric indices of height, weight and body mass index were calculated. RESULTS: A total of 168 832 children were included in the analyses and a school participation rate of more than 95% was obtained in 8 out of 12 countries. Stunting, underweight and thinness were rarely prevalent. However, 19.3-49.0% of boys and 18.4-42.5% of girls were overweight (including

  1. Spine surgeon's kinematics during discectomy, part II: operating table height and visualization methods, including microscope.

    Science.gov (United States)

    Park, Jeong Yoon; Kim, Kyung Hyun; Kuh, Sung Uk; Chin, Dong Kyu; Kim, Keun Su; Cho, Yong Eun

    2014-05-01

    Surgeon spine angle during surgery was studied ergonomically and the kinematics of the surgeon's spine was related with musculoskeletal fatigue and pain. Spine angles varied depending on operation table height and visualization method, and in a previous paper we showed that the use of a loupe and a table height at the midpoint between the umbilicus and the sternum are optimal for reducing musculoskeletal loading. However, no studies have previously included a microscope as a possible visualization method. The objective of this study is to assess differences in surgeon spine angles depending on operating table height and visualization method, including microscope. We enrolled 18 experienced spine surgeons for this study, who each performed a discectomy using a spine surgery simulator. Three different methods were used to visualize the surgical field (naked eye, loupe, microscope) and three different operating table heights (anterior superior iliac spine, umbilicus, the midpoint between the umbilicus and the sternum) were studied. Whole spine angles were compared for three different views during the discectomy simulation: midline, ipsilateral, and contralateral. A 16-camera optoelectronic motion analysis system was used, and 16 markers were placed from the head to the pelvis. Lumbar lordosis, thoracic kyphosis, cervical lordosis, and occipital angle were compared between the different operating table heights and visualization methods as well as a natural standing position. Whole spine angles differed significantly depending on visualization method. All parameters were closer to natural standing values when discectomy was performed with a microscope, and there were no differences between the naked eye and the loupe. Whole spine angles were also found to differ from the natural standing position depending on operating table height, and became closer to natural standing position values as the operating table height increased, independent of the visualization method

  2. A non-parametric conditional bivariate reference region with an application to height/weight measurements on normal girls

    DEFF Research Database (Denmark)

    Petersen, Jørgen Holm

    2009-01-01

    A conceptually simple two-dimensional conditional reference curve is described. The curve gives a decision basis for determining whether a bivariate response from an individual is "normal" or "abnormal" when taking into account that a third (conditioning) variable may influence the bivariate...... response. The reference curve is not only characterized analytically but also by geometric properties that are easily communicated to medical doctors - the users of such curves. The reference curve estimator is completely non-parametric, so no distributional assumptions are needed about the two......-dimensional response. An example that will serve to motivate and illustrate the reference is the study of the height/weight distribution of 7-8-year-old Danish school girls born in 1930, 1950, or 1970....

  3. A comparison of height and weight velocity as a part of the composite endpoint in pediatric HIV.

    Science.gov (United States)

    Benjamin, Daniel K; Miller, Wiliam C; Benjamin, Daniel K; Ryder, Robert W; Weber, David J; Walter, Emmanuel; McKinney, Ross E

    2003-11-07

    HIV adversely affects growth in children. Pediatric AIDS Clinical Trial Group (PACTG) protocols often use weight velocity [changes in weight z-score for age (WAZ)] as a part of the composite endpoint for phase II and III clinical trials. However, WAZ and height velocity (HAZ) have not been critically compared for their utility as part of the composite endpoint. HAZ and WAZ were compared to predict laboratory and clinical progression of HIV in a retrospective cohort study of HIV-infected children with data from PACTG Protocol 300. In both bivariable and multivariable analyses, changes in HAZ were more closely linked to subsequent progression than WAZ. Children with improved HAZ were somewhat less likely to exhibit virological failure [odds ratio (OR), 0.76; 95% confidence interval (CI) 0.51-1.14], than children with improved WAZ (OR, 1.45; 95% CI, 0.99,2.11). Children who had improved HAZ were less likely to exhibit immunological failure (OR, 0.7; 95% CI, 0.49-1.00), than children with improved WAZ (OR, 1.13; 95% CI, 0.82-1.57). Children who had improved HAZ were less likely to have other forms of clinical progression of HIV (OR, 0.55; 95% CI, 0.31-0.99), than children who had improved WAZ (OR, 1.0; 95% CI, 1.58-1.94). Increases in HAZ were associated with reduced risk of subsequent clinical progression and subsequent immune reconstitution and weakly associated with declines in HIV RNA. Changes in WAZ were not associated with laboratory outcomes relevant to pediatric HIV infection. Height velocity should be considered as a component of a composite clinical endpoint in future PACTG trials.

  4. [P wave dispersion increased in childhood depending on blood pressure, weight, height, and cardiac structure and function].

    Science.gov (United States)

    Chávez-González, Elibet; González-Rodríguez, Emilio; Llanes-Camacho, María Del Carmen; Garí-Llanes, Merlin; García-Nóbrega, Yosvany; García-Sáez, Julieta

    2014-01-01

    Increased P wave dispersion are identified as a predictor of atrial fibrillation. There are associations between hypertension, P wave dispersion, constitutional and echocardiographic variables. These relationships have been scarcely studied in pediatrics. The aim of this study was to determine the relationship between P wave dispersion, blood pressure, echocardiographic and constitutional variables, and determine the most influential variables on P wave dispersion increases in pediatrics. In the frame of the PROCDEC II project, children from 8 to 11 years old, without known heart conditions were studied. Arterial blood pressure was measured in all the children; a 12-lead surface electrocardiogram and an echocardiogram were done as well. Left ventricular mass index mean values for normotensive (25.91±5.96g/m(2.7)) and hypertensive (30.34±8.48g/m(2.7)) showed significant differences P=.000. When we add prehypertensive and hypertensive there are 50.38% with normal left ventricular mass index and P wave dispersion was increased versus 13.36% of normotensive. Multiple regression demonstrated that the mean blood pressure, duration of A wave of mitral inflow, weight and height have a value of r=0.88 as related to P wave dispersion. P wave dispersion is increased in pre- and hypertensive children compared to normotensive. There are pre- and hypertensive patients with normal left ventricular mass index and increased P wave dispersion. Mean arterial pressure, duration of the A wave of mitral inflow, weight and height are the variables with the highest influence on increased P wave dispersion. Copyright © 2013 Instituto Nacional de Cardiología Ignacio Chávez. Published by Masson Doyma México S.A. All rights reserved.

  5. Measuring device and method for dimples height differences of 17 x 17 grid

    International Nuclear Information System (INIS)

    Xu Yilan; Zheng Zhihui; Yan Liwei; Wang Xihe

    2001-01-01

    There are 264 cell for fastening fuel rods in the grid of 17 x 17 fuel assembly of PWR. The height differences of top and bottom dimples in a grid is an important quality characteristic of the grid. The report deals with measuring machine and method for dimples height differences of the grid. The device has two measuring probes. The Parallel Leaf Spring is used for transmitting the little displacement between two probes. The uncertainty of the device is σ≤4 μm. The measuring method is shown to be practicable

  6. Avaliação da aplicabilidade de fórmulas preditivas de peso e estatura em homens adultos Assessment of equations that estimate weight and height in adult men

    Directory of Open Access Journals (Sweden)

    Fabiane Aparecida Canaan Rezende

    2009-08-01

    Full Text Available OBJETIVO: Avaliar a validade de fórmulas preditivas de peso e de altura, bem como a composição corporal em homens adultos. MÉTODOS: A amostra constituiu-se de 98 homens saudáveis, com idades entre 20 e 58 anos. Para a análise das equações de estimativa de peso e altura, coletaram-se dados de peso, altura, altura do joelho, envergadura, semi-envergadura, circunferências da panturrilha e do braço e dobra cutânea subescapular. Avaliou-se a composição corporal por meio de bioimpedância elétrica. RESULTADOS: O peso estimado diferiu significantemente do peso aferido (pOBJECTIVE: The objective of this study was to evaluate the validity of equations that predict weight, height and body composition in adult men. METHODS: The sample consisted of 98 healthy men aged from 20 to 58 years. In order to analyze the equations, weight, height, knee height, arm span, half-arm span, calf and arm circumference and subscapular skinfold thickness were collected. Body composition was determined by bioimpedance. RESULTS: Estimated weights were significantly different from measured weights (p<0.001. The only equation that estimated height properly was that validated for adult Caucasian men. Both arm span (r=0.789; d=2.67; p<0.001 and half-arm span (r=0.790; d=2.51; p<0.001 overestimated height. When weight and height estimates were used to calculate body mass index, underweight was overestimated and overweight was underestimated, except when height was estimated with the equations for adult Caucasian men. CONCLUSION: The equation to estimate height validated for adult Caucasian men estimated the height of adult young men properly; the other validated equations presented significant differences. It is important to validate the equations assessed in this study in other population groups, making sure to use the estimated weights and heights to calculate body mass index.

  7. Differences among skeletal muscle mass indices derived from height-, weight-, and body mass index-adjusted models in assessing sarcopenia

    Science.gov (United States)

    Kim, Kyoung Min; Jang, Hak Chul; Lim, Soo

    2016-01-01

    Aging processes are inevitably accompanied by structural and functional changes in vital organs. Skeletal muscle, which accounts for 40% of total body weight, deteriorates quantitatively and qualitatively with aging. Skeletal muscle is known to play diverse crucial physical and metabolic roles in humans. Sarcopenia is a condition characterized by significant loss of muscle mass and strength. It is related to subsequent frailty and instability in the elderly population. Because muscle tissue is involved in multiple functions, sarcopenia is closely related to various adverse health outcomes. Along with increasing recognition of the clinical importance of sarcopenia, several international study groups have recently released their consensus on the definition and diagnosis of sarcopenia. In practical terms, various skeletal muscle mass indices have been suggested for assessing sarcopenia: appendicular skeletal muscle mass adjusted for height squared, weight, or body mass index. A different prevalence and different clinical implications of sarcopenia are highlighted by each definition. The discordances among these indices have emerged as an issue in defining sarcopenia, and a unifying definition for sarcopenia has not yet been attained. This review aims to compare these three operational definitions and to introduce an optimal skeletal muscle mass index that reflects the clinical implications of sarcopenia from a metabolic perspective. PMID:27334763

  8. New loci associated with birth weight identify genetic links between intrauterine growth and adult height and metabolism

    Science.gov (United States)

    Horikoshi, Momoko; Yaghootkar, Hanieh; Mook-Kanamori, Dennis O.; Sovio, Ulla; Taal, H. Rob; Hennig, Branwen J.; Bradfield, Jonathan P.; St. Pourcain, Beate; Evans, David M.; Charoen, Pimphen; Kaakinen, Marika; Cousminer, Diana L.; Lehtimäki, Terho; Kreiner-Møller, Eskil; Warrington, Nicole M.; Bustamante, Mariona; Feenstra, Bjarke; Berry, Diane J.; Thiering, Elisabeth; Pfab, Thiemo; Barton, Sheila J.; Shields, Beverley M.; Kerkhof, Marjan; van Leeuwen, Elisabeth M.; Fulford, Anthony J.; Kutalik, Zoltán; Zhao, Jing Hua; den Hoed, Marcel; Mahajan, Anubha; Lindi, Virpi; Goh, Liang-Kee; Hottenga, Jouke-Jan; Wu, Ying; Raitakari, Olli T.; Harder, Marie N.; Meirhaeghe, Aline; Ntalla, Ioanna; Salem, Rany M.; Jameson, Karen A.; Zhou, Kaixin; Monies, Dorota M.; Lagou, Vasiliki; Kirin, Mirna; Heikkinen, Jani; Adair, Linda S.; Alkuraya, Fowzan S.; Al-Odaib, Ali; Amouyel, Philippe; Andersson, Ehm Astrid; Bennett, Amanda J.; Blakemore, Alexandra I.F.; Buxton, Jessica L.; Dallongeville, Jean; Das, Shikta; de Geus, Eco J. C.; Estivill, Xavier; Flexeder, Claudia; Froguel, Philippe; Geller, Frank; Godfrey, Keith M.; Gottrand, Frédéric; Groves, Christopher J.; Hansen, Torben; Hirschhorn, Joel N.; Hofman, Albert; Hollegaard, Mads V.; Hougaard, David M.; Hyppönen, Elina; Inskip, Hazel M.; Isaacs, Aaron; Jørgensen, Torben; Kanaka-Gantenbein, Christina; Kemp, John P.; Kiess, Wieland; Kilpeläinen, Tuomas O.; Klopp, Norman; Knight, Bridget A.; Kuzawa, Christopher W.; McMahon, George; Newnham, John P.; Niinikoski, Harri; Oostra, Ben A.; Pedersen, Louise; Postma, Dirkje S.; Ring, Susan M.; Rivadeneira, Fernando; Robertson, Neil R.; Sebert, Sylvain; Simell, Olli; Slowinski, Torsten; Tiesler, Carla M.T.; Tönjes, Anke; Vaag, Allan; Viikari, Jorma S.; Vink, Jacqueline M.; Vissing, Nadja Hawwa; Wareham, Nicholas J.; Willemsen, Gonneke; Witte, Daniel R.; Zhang, Haitao; Zhao, Jianhua; Wilson, James F.; Stumvoll, Michael; Prentice, Andrew M.; Meyer, Brian F.; Pearson, Ewan R.; Boreham, Colin A.G.; Cooper, Cyrus; Gillman, Matthew W.; Dedoussis, George V.; Moreno, Luis A; Pedersen, Oluf; Saarinen, Maiju; Mohlke, Karen L.; Boomsma, Dorret I.; Saw, Seang-Mei; Lakka, Timo A.; Körner, Antje; Loos, Ruth J.F.; Ong, Ken K.; Vollenweider, Peter; van Duijn, Cornelia M.; Koppelman, Gerard H.; Hattersley, Andrew T.; Holloway, John W.; Hocher, Berthold; Heinrich, Joachim; Power, Chris; Melbye, Mads; Guxens, Mònica; Pennell, Craig E.; Bønnelykke, Klaus; Bisgaard, Hans; Eriksson, Johan G.; Widén, Elisabeth; Hakonarson, Hakon; Uitterlinden, André G.; Pouta, Anneli; Lawlor, Debbie A.; Smith, George Davey; Frayling, Timothy M.; McCarthy, Mark I.; Grant, Struan F.A.; Jaddoe, Vincent W.V.; Jarvelin, Marjo-Riitta; Timpson, Nicholas J.; Prokopenko, Inga; Freathy, Rachel M.

    2012-01-01

    Birth weight within the normal range is associated with a variety of adult-onset diseases, but the mechanisms behind these associations are poorly understood1. Previous genome-wide association studies identified a variant in the ADCY5 gene associated both with birth weight and type 2 diabetes, and a second variant, near CCNL1, with no obvious link to adult traits2. In an expanded genome-wide association meta-analysis and follow-up study (up to 69,308 individuals of European descent from 43 studies), we have now extended the number of genome-wide significant loci to seven, accounting for a similar proportion of variance to maternal smoking. Five of the loci are known to be associated with other phenotypes: ADCY5 and CDKAL1 with type 2 diabetes; ADRB1 with adult blood pressure; and HMGA2 and LCORL with adult height. Our findings highlight genetic links between fetal growth and postnatal growth and metabolism. PMID:23202124

  9. A HYBRID METHOD IN VEGETATION HEIGHT ESTIMATION USING POLINSAR IMAGES OF CAMPAIGN BIOSAR

    Directory of Open Access Journals (Sweden)

    S. Dehnavi

    2015-12-01

    Full Text Available Recently, there have been plenty of researches on the retrieval of forest height by PolInSAR data. This paper aims at the evaluation of a hybrid method in vegetation height estimation based on L-band multi-polarized air-borne SAR images. The SAR data used in this paper were collected by the airborne E-SAR system. The objective of this research is firstly to describe each interferometry cross correlation as a sum of contributions corresponding to single bounce, double bounce and volume scattering processes. Then, an ESPIRIT (Estimation of Signal Parameters via Rotational Invariance Techniques algorithm is implemented, to determine the interferometric phase of each local scatterer (ground and canopy. Secondly, the canopy height is estimated by phase differencing method, according to the RVOG (Random Volume Over Ground concept. The applied model-based decomposition method is unrivaled, as it is not limited to specific type of vegetation, unlike the previous decomposition techniques. In fact, the usage of generalized probability density function based on the nth power of a cosine-squared function, which is characterized by two parameters, makes this method useful for different vegetation types. Experimental results show the efficiency of the approach for vegetation height estimation in the test site.

  10. a Hybrid Method in Vegetation Height Estimation Using Polinsar Images of Campaign Biosar

    Science.gov (United States)

    Dehnavi, S.; Maghsoudi, Y.

    2015-12-01

    Recently, there have been plenty of researches on the retrieval of forest height by PolInSAR data. This paper aims at the evaluation of a hybrid method in vegetation height estimation based on L-band multi-polarized air-borne SAR images. The SAR data used in this paper were collected by the airborne E-SAR system. The objective of this research is firstly to describe each interferometry cross correlation as a sum of contributions corresponding to single bounce, double bounce and volume scattering processes. Then, an ESPIRIT (Estimation of Signal Parameters via Rotational Invariance Techniques) algorithm is implemented, to determine the interferometric phase of each local scatterer (ground and canopy). Secondly, the canopy height is estimated by phase differencing method, according to the RVOG (Random Volume Over Ground) concept. The applied model-based decomposition method is unrivaled, as it is not limited to specific type of vegetation, unlike the previous decomposition techniques. In fact, the usage of generalized probability density function based on the nth power of a cosine-squared function, which is characterized by two parameters, makes this method useful for different vegetation types. Experimental results show the efficiency of the approach for vegetation height estimation in the test site.

  11. Comparison of Farfan modified and Frobin methods to evaluate the intervertebral disc height

    Directory of Open Access Journals (Sweden)

    Michel Kanas

    2014-03-01

    Full Text Available OBJECTIVE: To evaluate the reliability and reproducibility of Farfan modified and Frobin methods to measure the intervertebral disc height in radiographs with inter- and intraobserver comparison. METHOD: Six radiographs of different patients treated for low back pain have been collected and digitized, and five lumbar disc of each patient were evaluated by six examiners with different levels of experience. The measures were done in Image Pro Plus 6.0 software. RESULTS: When compared, both methods showed more than 95% concordance. In intraexaminer analysis, both also shown to be reliable and reproducible, with a high level of concordance. By comparing the correlation between classes of examiners, the higher the level of experience, the greater the agreement for both methods. CONCLUSION: Farfan modified and Frobin are reliable methods to measure the disc height in the lateral radiographs. The higher level of experience of the examiner, the higher was the correlation between measurements.

  12. Diffusion weighted imaging by MR method

    International Nuclear Information System (INIS)

    Horikawa, Yoshiharu; Naruse, Shoji; Ebisu, Toshihiko; Tokumitsu, Takuaki; Ueda, Satoshi; Tanaka, Chuzo; Higuchi, Toshihiro; Umeda, Masahiro.

    1993-01-01

    Diffusion weighted magnetic resonance imaging is a recently developed technique used to examine the micromovement of water molecules in vivo. We have applied this technique to examine various kinds of brain diseases, both experimentally and clinically. The calculated apparent diffusion coefficient (ADC) in vivo showed reliable values. In experimentally induced brain edema in rats, the pathophysiological difference of the type of edema (such as cytotoxic, and vasogenic) could be differentiated on the diffusion weighted MR images. Cytotoxic brain edema showed high intensity (slower diffusion) on the diffusion weighted images. On the other hand, vasogenic brain edema showed a low intensity image (faster diffusion). Diffusion anisotropy was demonstrated according to the direction of myelinated fibers and applied motion proving gradient (MPG). This anisotropy was also demonstrated in human brain tissue along the course of the corpus callosum, pyramidal tract and optic radiation. In brain ischemia cases, lesions were detected as high signal intensity areas, even one hour after the onset of ischemia. Diffusion was faster in brain tumor compared with normal brain. Histological differences were not clearly reflected by the ADC value. In epidermoid tumor cases, the intensity was characteristically high, was demonstrated, and the cerebrospinal fluid border was clearly demonstrated. New clinical information obtainable with this molecular diffusion method will prove to be useful in various clinical studies. (author)

  13. Supplier Selection Using Weighted Utility Additive Method

    Science.gov (United States)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  14. Review and intercomparison of operational methods for the determination of the mixing height

    DEFF Research Database (Denmark)

    Seibert, P.; Beyrich, F.; Gryning, Sven-Erik

    2002-01-01

    The height of the atmospheric boundary layer (ABL) or the mixing height (MH) is a fundamental parameter characterising the structure of the lower troposphere. Two basic possibilities for the practical determination of the MH are its derivation from profile data (measurements or numerical model...... output) and its parameterisation using simple equations or models (which only need a few measured input values). Different methods suggested in the literature are reviewed in this paper. The most important methods have been tested on data sets from three different sites in Europe (Cabauw—NL, Payerne......—CH, Melpitz—D). Parcel and Richardson number methods applied to radiosonde profiles and the analysis of sodar and wind profiler data have been investigated. Modules for MH determination implemented in five currently used meteorological preprocessors for dispersion models have been tested, too. Parcel methods...

  15. Voxel-Based Spatial Filtering Method for Canopy Height Retrieval from Airborne Single-Photon Lidar

    Directory of Open Access Journals (Sweden)

    Hao Tang

    2016-09-01

    Full Text Available Airborne single-photon lidar (SPL is a new technology that holds considerable potential for forest structure and carbon monitoring at large spatial scales because it acquires 3D measurements of vegetation faster and more efficiently than conventional lidar instruments. However, SPL instruments use green wavelength (532 nm lasers, which are sensitive to background solar noise, and therefore SPL point clouds require more elaborate noise filtering than other lidar instruments to determine canopy heights, particularly in daytime acquisitions. Histogram-based aggregation is a commonly used approach for removing noise from photon counting lidar data, but it reduces the resolution of the dataset. Here we present an alternate voxel-based spatial filtering method that filters noise points efficiently while largely preserving the spatial integrity of SPL data. We develop and test our algorithms on an experimental SPL dataset acquired over Garrett County in Maryland, USA. We then compare canopy attributes retrieved using our new algorithm with those obtained from the conventional histogram binning approach. Our results show that canopy heights derived using the new algorithm have a strong agreement with field-measured heights (r2 = 0.69, bias = 0.42 m, RMSE = 4.85 m and discrete return lidar heights (r2 = 0.94, bias = 1.07 m, RMSE = 2.42 m. Results are consistently better than height accuracies from the histogram method (field data: r2 = 0.59, bias = 0.00 m, RMSE = 6.25 m; DRL: r2 = 0.78, bias = −0.06 m and RMSE = 4.88 m. Furthermore, we find that the spatial-filtering method retains fine-scale canopy structure detail and has lower errors over steep slopes. We therefore believe that automated spatial filtering algorithms such as the one presented here can support large-scale, canopy structure mapping from airborne SPL data.

  16. Review and intercomparison of operational methods for the determination of the mixing height

    DEFF Research Database (Denmark)

    Seibert, P.; Beyrich, F.; Gryning, Sven-Erik

    2000-01-01

    The height of the atmospheric boundary layer (ABL) or the mixing height (MH) is a fundamental parameter characterising the structure of the lower troposphere. Two basic possibilities for the practical determination of the MH are its derivation from profile data (measurements or numerical model...... output) and its parameterisation using simple equations or models (which only need a few measured input values). Different methods suggested in the literature are reviewed in this paper. The most important methods have been tested on data sets from three different sites in Europe (Cabauw - NL, Payerne...... - CH, Melpitz - D). Parcel and Richardson number methods applied to radiosonde profiles and the analysis of sodar and wind profiler data have been investigated. Modules for MH determination implemented in five currently used meteorological preprocessors for dispersion models have been tested, too...

  17. Beverage Consumption Patterns at Age 13 to 17 Years Are Associated with Weight, Height, and Body Mass Index at Age 17 Years.

    Science.gov (United States)

    Marshall, Teresa A; Van Buren, John M; Warren, John J; Cavanaugh, Joseph E; Levy, Steven M

    2017-05-01

    Sugar-sweetened beverages (SSBs) have been associated with obesity in children and adults; however, associations between beverage patterns and obesity are not understood. Our aim was to describe beverage patterns during adolescence and associations between adolescent beverage patterns and anthropometric measures at age 17 years. We conducted a cross-sectional analyses of longitudinally collected data. Data from participants in the longitudinal Iowa Fluoride Study having at least one beverage questionnaire completed between ages 13.0 and 14.0 years, having a second questionnaire completed between 16.0 and 17.0 years, and attending clinic examination for weight and height measurements at age 17 years (n=369) were included. Beverages were collapsed into four categories (ie, 100% juice, milk, water and other sugar-free beverages, and SSBs) for the purpose of clustering. Five beverage clusters were identified from standardized age 13 to 17 years mean daily beverage intakes and named by the authors for the dominant beverage: juice, milk, water/sugar-free beverages, neutral, and SSB. Weight, height, and body mass index (BMI; calculated as kg/m 2 ) at age 17 years were analyzed. We used Ward's method for clustering of beverage variables, one-way analysis of variance and χ 2 tests for bivariable associations, and γ-regression for associations of weight or BMI (outcomes) with beverage clusters and demographic variables. Linear regression was used for associations of height (outcome) with beverage clusters and demographic variables. Participants with family incomes beverage cluster membership. For example, on average, male and female members of the neutral cluster were 4.5 cm (P=0.010) and 4.2 cm (P=0.034) shorter, respectively, than members of the milk cluster. For members of the juice cluster, mean BMI was lower than for members of the milk cluster (by 2.4 units), water/sugar-free beverage cluster (3.5 units), neutral cluster (2.2 units), and SSB cluster (3.2 units) (all

  18. Assortive mating for personaltiy traits, educational level, religious affiliation, height, weight, adn body mass index in parents of Korean twin sample.

    Science.gov (United States)

    Hur, Yoon-Mi

    2003-12-01

    The degree of assortative mating for psychological and physical traits in Asian societies in relatively unknown. The present study examined assortative mating for educational level, personality traits, religious affiliation, height, weight, and body mass index in a korean sample. Age-adjusted spouse correlations were high for educational level (r = .63) and religious affiliation (r = .67), modest for most personality traits (rs = -.01 to .26), and trivial for height (r = .04), weight (r = .05)m and body mass index (r = .11). These results were remarkably similar to those found from the western samples. Implications of the present findings in behavior genetic studies and human mating patterns were briefly discussed.

  19. NBL-Davies-Gray weight titration method

    International Nuclear Information System (INIS)

    Hassell, C.

    1981-01-01

    The titration method for uranium consists of the following basic steps: reduction of U +6 to U +4 by Fe +2 ; selective oxidation of excess Fe +2 by HNO 3 with Mo +6 catalyst, all in strong phosphoric acid solution; and titration of the U +4 with standard dichromate after dilution. In this paper, detailed procedure of the NBL method, its modification to a gravimetric system or weight titration technique, and miniaturization of the NBL titrimetric method are discussed. Improved precisions and accuracy (2 to 3 times), of the gravimetric titrant delivery has made it possible to reduce the amount of uranium taken for each analysis. At present, using gravimetric delivery, most samples are titrated in the 30 to 50 mg range. Improved precision has led to investigating the possibility of a scaled-down version of the basic method so as to reduce the volume of phosphoric acid waste generated. Because all reactions are carried out in the same vessel, this method can be automated. Analysts at NBL have been able to restrict error to 0.05% or better in the 30 to 100 mg range using the basic procedure

  20. Relationship between QTL for grain shape, grain weight, test weight, milling yield, and plant height in the spring wheat cross RL4452/'AC Domain'.

    Science.gov (United States)

    Cabral, Adrian L; Jordan, Mark C; Larson, Gary; Somers, Daryl J; Humphreys, D Gavin; McCartney, Curt A

    2018-01-01

    Kernel morphology characteristics of wheat are complex and quantitatively inherited. A doubled haploid (DH) population of the cross RL4452/'AC Domain' was used to study the genetic basis of seed shape. Quantitative trait loci (QTL) analyses were conducted on a total of 18 traits: 14 grain shape traits, flour yield (Fyd), and three agronomic traits (Plant height [Plht], 1000 Grain weight [Gwt], Test weight [Twt]), using data from trial locations at Glenlea, Brandon, and Morden in Manitoba, Canada, between 1999 and 2004. Kernel shape was studied through digital image analysis with an Acurum® grain analyzer. Plht, Gwt, Twt, Fyd, and grain shape QTL were correlated with each other and QTL analysis revealed that QTL for these traits often mapped to the same genetic locations. The most significant QTL for the grain shape traits were located on chromosomes 4B and 4D, each accounting for up to 24.4% and 53.3% of the total phenotypic variation, respectively. In addition, the most significant QTL for Plht, Gwt, and Twt were all detected on chromosome 4D at the Rht-D1 locus. Rht-D1b decreased Plht, Gwt, Twt, and kernel width relative to the Rht-D1a allele. A narrow genetic interval on chromosome 4B contained significant QTL for grain shape, Gwt, and Plht. The 'AC Domain' allele reduced Plht, Gwt, kernel length and width traits, but had no detectable effect on Twt. The data indicated that this variation was inconsistent with segregation at Rht-B1. Numerous QTL were identified that control these traits in this population.

  1. Relationship between QTL for grain shape, grain weight, test weight, milling yield, and plant height in the spring wheat cross RL4452/‘AC Domain’

    Science.gov (United States)

    Cabral, Adrian L.; Jordan, Mark C.; Larson, Gary; Somers, Daryl J.; Humphreys, D. Gavin

    2018-01-01

    Kernel morphology characteristics of wheat are complex and quantitatively inherited. A doubled haploid (DH) population of the cross RL4452/‘AC Domain’ was used to study the genetic basis of seed shape. Quantitative trait loci (QTL) analyses were conducted on a total of 18 traits: 14 grain shape traits, flour yield (Fyd), and three agronomic traits (Plant height [Plht], 1000 Grain weight [Gwt], Test weight [Twt]), using data from trial locations at Glenlea, Brandon, and Morden in Manitoba, Canada, between 1999 and 2004. Kernel shape was studied through digital image analysis with an Acurum® grain analyzer. Plht, Gwt, Twt, Fyd, and grain shape QTL were correlated with each other and QTL analysis revealed that QTL for these traits often mapped to the same genetic locations. The most significant QTL for the grain shape traits were located on chromosomes 4B and 4D, each accounting for up to 24.4% and 53.3% of the total phenotypic variation, respectively. In addition, the most significant QTL for Plht, Gwt, and Twt were all detected on chromosome 4D at the Rht-D1 locus. Rht-D1b decreased Plht, Gwt, Twt, and kernel width relative to the Rht-D1a allele. A narrow genetic interval on chromosome 4B contained significant QTL for grain shape, Gwt, and Plht. The ‘AC Domain’ allele reduced Plht, Gwt, kernel length and width traits, but had no detectable effect on Twt. The data indicated that this variation was inconsistent with segregation at Rht-B1. Numerous QTL were identified that control these traits in this population. PMID:29357369

  2. An Improved Iterative Fitting Method to Estimate Nocturnal Residual Layer Height

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2016-08-01

    Full Text Available The planetary boundary layer (PBL is an atmospheric region near the Earth’s surface. It is significant for weather forecasting and for the study of air quality and climate. In this study, the top of nocturnal residual layers—which are what remain of the daytime mixing layer—are estimated by an elastic backscatter Lidar in Wuhan (30.5°N, 114.4°E, a city in Central China. The ideal profile fitting method is widely applied to determine the nocturnal residual layer height (RLH from Lidar data. However, the method is seriously affected by an optical thick layer. Thus, we propose an improved iterative fitting method to eliminate the optical thick layer effect on RLH detection using Lidar. Two typical case studies observed by elastic Lidar are presented to demonstrate the theory and advantage of the proposed method. Results of case analysis indicate that the improved method is more practical and precise than profile-fitting, gradient, and wavelet covariance transform method in terms of nocturnal RLH evaluation under low cloud conditions. Long-term observations of RLH performed with ideal profile fitting and improved methods were carried out in Wuhan from 28 May 2011 to 17 June 2016. Comparisons of Lidar-derived RLHs with the two types of methods verify that the improved solution is practical. Statistical analysis of a six-year Lidar signal was conducted to reveal the monthly average values of nocturnal RLH in Wuhan. A clear RLH monthly cycle with a maximum mean height of about 1.8 km above ground level was observed in August, and a minimum height of about 0.7 km was observed in January. The variation in monthly mean RLH displays an obvious quarterly dependence, which coincides with the annual variation in local surface temperature.

  3. INFLUENCE OF BODY HEIGHT, BODY WEIGHT AND THE AGE ON THE RESULTS ACHIEVED BY MAN-MARATHONERS IN A MARATHON RACE

    Directory of Open Access Journals (Sweden)

    Naser Rašiti Naser

    2011-09-01

    Full Text Available The research is conducted on a sample of 100 successful man marathoners who has taken part in ten of the most popular marathon races. The sample of entities includes ten of the best placed marathoners in each race held during the year 2008. The aim of the research is to assess the influence of the body height, weight and the age of the marathoners on the final result in the race. The collected data is processed by the basic descriptive parameters. The entities have the average weight of 56.94 kg, with the average height of 168.98 cm, at the average age of 29.75, with the achieved average result of 2:13.23 hours in the race. In the intercorrelation matrix only one significant coefficient of correlation is obtained (p<0.001 between the body height and body weight. By the regressive analysis the influence of the predictory variables (height, weight and age on the criteria variable – sig. =0, 21 (the result of the marathon is not confirmed, which provides only 15% (RO²=.302 of analysis in the common ground of variability. The rest of 91% in analysing the total variability of the criteria variable can be ascribed to some other anthropologic characteristics, and mainly to the functional characteristics of anaerobic type.

  4. Comparison of Updated Weight and Height Percentiles with Previous References in 6-17-Year-Old Children in Kayseri, Turkey.

    Science.gov (United States)

    Zararsız, Gökmen; Çiçek, Betül; Kondolot, Meda; Mazıcıoğlu, M Mümtaz; Öztürk, Ahmet; Kurtoğlu, Selim

    2017-03-01

    To compare updated weight and height percentiles of 6-17-year-old children from all socio-economic levels in Kayseri with previous local references and other national/international data. The second study "Determination of Anthropometric Measurements of Turkish Children and Adolescents study (DAMTCA II)" was conducted in Kayseri, between October 2007 and April 2008. Weight and height measurements from 4321 (1926 boys, 2395 girls) school children aged between 6 to 17 years were included in this cross-sectional study. Using these data, weight and height percentile curves were produced with generalized additive models for location, scale and shape (GAMLSS) and compared with the most recent references. Smoothed percentile curves including the 3 rd , 5 th , 10 th , 15 th , 25 th , 50 th , 75 th , 85 th , 90 th , 95 th , and 97 th percentiles were obtained for boys and girls. These results were compared with DAMTCA I study and with two national (İstanbul and Ankara) and international data from Asia and from Europe. This study provides updated weight and height references for Turkish school children aged between 6 and 17 years residing in Kayseri.

  5. The effects of extraction of pulpally involved primary teeth on weight, height and BMI in underweight Filipino children: a cluster randomized clinical trial

    NARCIS (Netherlands)

    Monse, B.; Duijster, D.; Sheiham, A.; Grijalva-Eternod, C.S.; van Palenstein Helderman, W.H.; Hobdell, M.H.

    2012-01-01

    Background: Severe dental caries and the treatment thereof are reported to affect growth and well-being of young children. The objective of this study was to assess the effects of extraction of severely decayed pulpally involved primary teeth on weight and height in underweight preschool Filipino

  6. Grip strength is strongly associated with height, weight and gender in childhood : a cross sectional study of 2241 children and adolescents providing reference values

    NARCIS (Netherlands)

    Ploegmakers, Joris J. W.; Hepping, Ann M.; Geertzen, Jan H. B.; Bulstra, Sjoerd K.; Stevens, Martin

    2013-01-01

    Question: What are reference values for grip strength in children and adolescents based on a large and heterogeneous study population? What is the association of grip strength with age, gender, weight, and height in this population? Design: Cross-sectional study. Participants: Participants were

  7. Assessment of loaded squat jump height with a free-weight barbell and Smith machine: comparison of the take-off velocity and flight time procedures.

    Science.gov (United States)

    Pérez-Castilla, Alejandro; McMahon, John J; Comfort, Paul; García-Ramos, Amador

    2017-07-31

    The aims of this study were to compare the reliability and magnitude of jump height between the two standard procedures of analysing force platform data to estimate jump height (take-off velocity [TOV] and flight time [FT]) in the loaded squat jump (SJ) exercise performed with a free-weight barbell and in a Smith machine. Twenty-three collegiate men (age 23.1 ± 3.2 years, body mass 74.7 ± 7.3 kg, height 177.1 ± 7.0 cm) were tested twice for each SJ type (free-weight barbell and Smith machine) with 17, 30, 45, 60, and 75 kg loads. No substantial differences in reliability were observed between the TOV (Coefficient of variation [CV]: 9.88%; Intraclass correlation coefficient [ICC]: 0.82) and FT (CV: 8.68%; ICC: 0.88) procedures (CV ratio: 1.14), while the Smith SJ (CV: 7.74%; ICC: 0.87) revealed a higher reliability than the free-weight SJ (CV: 9.88%; ICC: 0.81) (CV ratio: 1.28). The TOV procedure provided higher magnitudes of jump height than the FT procedure for the loaded Smith machine SJ (systematic bias: 2.64 cm; Pfree-weight SJ exercise (systematic bias: 0.26 cm; P>0.05). Heteroscedasticity of the errors was observed for the Smith machine SJ (r: 0.177) with increasing differences in favour of the TOV procedure for the trials with lower jump height (i.e. higher external loads). Based on these results the use of a Smith machine in conjunction with the FT more accurately determine jump height during the loaded SJ.

  8. A method to estimate the height of temperature inversion layer and the effective mixing depht

    International Nuclear Information System (INIS)

    Nicolli, D.

    1978-05-01

    A review of the concept PBL or turbulent boundary layer is made as it is understood in meteorology. Some features of the PBL parameterization are also discussed, as well as the methods used to estimate the temperature inversion heights during morning and afternoon hours. The study bases on the assumption of the dry adiabatic lapse rate in the mixing layer that is, water vapor and airborne material are supposed to be homogeneously mixed below the inversion layer or in the effective mixing depth. The mean mixing heights over Rio de Janeiro area respectively about 500m and 1000m at morning and afternoon hours. For Sao Paulo these values are respectively 400m and 1300m at morning and afternoon hours [pt

  9. Waist-height ratio in children of 7 to 11 years with high weight at birth and its relationship with gender, age and diet.

    Science.gov (United States)

    Rodríguez Vargas, Nuris; Fernandez-Britto, Jose Emilio; Martinez Perez, Tania Paula; Martinez Garcia, Rolando; Castañeda Garcia, Cecilia Margarita; Garriga Reyes, Mailin; Cabrera Estrada, Claudia; Plana Labrada, Rossana; García Niebla, Rosa María; Blanco Aranguren, Fabiola

    2018-03-26

    Obesity (OB), considered as one of the Non-Transmissible Chronic Diseases, has as its fundamental characteristics that of being prevalent at a global level, increasing in number, affecting developed and developing countries, affecting both genders, and all ages and social groups. To identify if high birth weight is a predictive factor (risk factor) for abdominal obesity in children 7 to 11 years old, and its relationship to gender, age and diet. A case-control descriptive study was carried out with children born between January 1992 and December 1995, in order to identify early risk factors (atherosclerotic accelerators) such as abdominal obesity in children aged 7 to 11, and who have a history of macrosomia or high birth weight, as well as their relationship with gender, age and diet. It was observed that the waist/height value was normal in 60.8% of the study group and in 64.00% in the control group. The difference between groups, gender, and age was not significant (P=.6859). As regards the diet in the study group (macrosomic), there was no significant association between the type of diet and waist circumference/height values, with an χ 2 =0.223 and P=.6373 (not significant). In the control group (with normal weight at birth), it was found that there is a significant statistical association between the type of diet and waist circumference/height values. This means that it can be stated, with 95% reliability, that the type of diet is associated with waist/height values. High birth weight is not a predictive factor (risk factor) for abdominal obesity (increased waist/height index). Gender and age are independent for abdominal obesity (macrosomic and normal weight at birth). The diet in high birth weight children is not related to the index waist-height index, which is not the case in those born with normal weight under the same conditions. The marked increase in abdominal obesity (Waist/height index) in children between 7 and 11 years old in both groups is

  10. Validade do peso e da altura auto-referidos: o estudo de Goiânia Validity of self-reported weight and height: the Goiânia study, Brazil

    Directory of Open Access Journals (Sweden)

    Maria do Rosário Gondim Peixoto

    2006-12-01

    Full Text Available OBJETIVO: Avaliar a validade do peso e altura referidos no diagnóstico da obesidade e identificar características sociodemográficas e individuais que podem constituir viés de informação. MÉTODOS: Estudo transversal populacional realizado na cidade de Goiânia em 2001. Em entrevista domiciliar com 1.023 indivíduos de 20-64 anos, foram coletadas informações sociodemográficas e sobre peso e altura referidos. Na ocasião, os indivíduos foram pesados e medidos. Foram calculadas diferenças entre médias, coeficiente de correlação e de medidas referidas e aferidas, segundo idade, índice de massa corporal, escolaridade, renda e altura. RESULTADOS: Homens e mulheres superestimaram a altura (p0,05. O comportamento de supestimar a altura foi influenciado pela idade, escolaridade, altura e índice de massa corporal. Embora o índice obtido a partir dos dados referidos tenha sido subestimado (pOBJECTIVE: To assess the validity of self-reported weight and height at the time of diagnosing obesity, and to identify the sociodemographic and individual characteristics that might be a source of information bias. METHODS: This was a cross-sectional population-based study carried out in the city of Goiânia in 2001. Interviews were conducted with 1,023 individuals aged 20-64 years, in their homes, to collect sociodemographic and self-reported weight and height information. On the same occasion, weight and height measurements were made on these individuals. The mean differences and correlation coefficients between self-reported and measured data were calculated according to age, body mass index (BMI, schooling, income and height. RESULTS: Both the men and women overestimated their heights (p0.05. The behavior of overestimating height was influenced by age, schooling, height and body mass index. Although this index obtained from the self-reported data was underestimated (p<0.05, by 0.27 kg/m² and 0.67 kg/m² for men and women respectively, the measured

  11. Genetic and environmental contributions to weight, height, and BMI from birth to 19 years of age: an international study of over 12,000 twin pairs.

    Directory of Open Access Journals (Sweden)

    Lise Dubois

    Full Text Available OBJECTIVE: To examine the genetic and environmental influences on variances in weight, height, and BMI, from birth through 19 years of age, in boys and girls from three continents. DESIGN AND SETTINGS: Cross-sectional twin study. Data obtained from a total of 23 twin birth-cohorts from four countries: Canada, Sweden, Denmark, and Australia. Participants were Monozygotic (MZ and dizygotic (DZ (same- and opposite-sex twin pairs with data available for both height and weight at a given age, from birth through 19 years of age. Approximately 24,036 children were included in the analyses. RESULTS: Heritability for body weight, height, and BMI was low at birth (between 6.4 and 8.7% for boys, and between 4.8 and 7.9% for girls but increased over time, accounting for close to half or more of the variance in body weight and BMI after 5 months of age in both sexes. Common environmental influences on all body measures were high at birth (between 74.1-85.9% in all measures for boys, and between 74.2 and 87.3% in all measures for girls and markedly reduced over time. For body height, the effect of the common environment remained significant for a longer period during early childhood (up through 12 years of age. Sex-limitation of genetic and shared environmental effects was observed. CONCLUSION: Genetics appear to play an increasingly important role in explaining the variation in weight, height, and BMI from early childhood to late adolescence, particularly in boys. Common environmental factors exert their strongest and most independent influence specifically in pre-adolescent years and more significantly in girls. These findings emphasize the need to target family and social environmental interventions in early childhood years, especially for females. As gene-environment correlation and interaction is likely, it is also necessary to identify the genetic variants that may predispose individuals to obesity.

  12. Applying the Weighted Horizontal Magnetic Gradient Method to a Simulated Flaring Active Region

    Science.gov (United States)

    Korsós, M. B.; Chatterjee, P.; Erdélyi, R.

    2018-04-01

    Here, we test the weighted horizontal magnetic gradient (WG M ) as a flare precursor, introduced by Korsós et al., by applying it to a magnetohydrodynamic (MHD) simulation of solar-like flares. The preflare evolution of the WG M and the behavior of the distance parameter between the area-weighted barycenters of opposite-polarity sunspots at various heights is investigated in the simulated δ-type sunspot. Four flares emanated from this sunspot. We found the optimum heights above the photosphere where the flare precursors of the WG M method are identifiable prior to each flare. These optimum heights agree reasonably well with the heights of the occurrence of flares identified from the analysis of their thermal and ohmic heating signatures in the simulation. We also estimated the expected time of the flare onsets from the duration of the approaching–receding motion of the barycenters of opposite polarities before each single flare. The estimated onset time and the actual time of occurrence of each flare are in good agreement at the corresponding optimum heights. This numerical experiment further supports the use of flare precursors based on the WG M method.

  13. A Reliable Method to Measure Lip Height Using Photogrammetry in Unilateral Cleft Lip Patients.

    Science.gov (United States)

    van der Zeeuw, Frederique; Murabit, Amera; Volcano, Johnny; Torensma, Bart; Patel, Brijesh; Hay, Norman; Thorburn, Guy; Morris, Paul; Sommerlad, Brian; Gnarra, Maria; van der Horst, Chantal; Kangesu, Loshan

    2015-09-01

    There is still no reliable tool to determine the outcome of the repaired unilateral cleft lip (UCL). The aim of this study was therefore to develop an accurate, reliable tool to measure vertical lip height from photographs. The authors measured the vertical height of the cutaneous and vermilion parts of the lip in 72 anterior-posterior view photographs of 17 patients with repairs to a UCL. Points on the lip's white roll and vermillion were marked on both the cleft and the noncleft sides on each image. Two new concepts were tested. First, photographs were standardized using the horizontal (medial to lateral) eye fissure width (EFW) for calibration. Second, the authors tested the interpupillary line (IPL) and the alar base line (ABL) for their reliability as horizontal lines of reference. Measurements were taken by 2 independent researchers, at 2 different time points each. Overall 2304 data points were obtained and analyzed. Results showed that the method was very effective in measuring the height of the lip on the cleft side with the noncleft side. When using the IPL, inter- and intra-rater reliability was 0.99 to 1.0, with the ABL it varied from 0.91 to 0.99 with one exception at 0.84. The IPL was easier to define because in some subjects the overhanging nasal tip obscured the alar base and gave more consistent measurements possibly because the reconstructed alar base was sometimes indistinct. However, measurements from the IPL can only give the percentage difference between the left and right sides of the lip, whereas those from the ABL can also give exact measurements. Patient examples were given that show how the measurements correlate with clinical assessment. The authors propose this method of photogrammetry with the innovative use of the IPL as a reliable horizontal plane and use of the EFW for calibration as a useful and reliable tool to assess the outcome of UCL repair.

  14. New loci associated with birth weight identify genetic links between intrauterine growth and adult height and metabolism

    NARCIS (Netherlands)

    Horikoshi, M.; Yaghootkar, H.; Mook-Kanamori, D.O.; Sovio, U.; Taal, H.R.; Hennig, B.J.; Bradfield, J.P.; St Pourcain, B.; Evans, D.M.; Charoen, P.; Kaakinen, M.; Cousminer, D.L.; Lehtimäki, T.; Kreiner-Møller, E.; Warrington, N.M.; Bustamante, M.; Feenstra, B.; Berry, D.J.; Thiering, E.; Pfab, T.; Barton, S.J.; Shields, B.M.; Kerkhof, M.; Leeuwen, E. M.; Fulford, A.J.; Kutalik, Z.; Zhao, J.H.; van den Hoed, M.; Mahajan, A.; Lindi, V.; Goh, L.K.; Hottenga, J.J.; Wu, Y.; Raitakari, O.T.; Harder, M.N.; Meirhaeghe, A.; Ntalla, I.; Salem, R.M.; Jameson, K.A.; Zhou, K.; Monies, D.M.; Lagou, V.; Kirin, M.; Heikkinen, J.; Adair, L.S.; Alkuraya, F.S.; Al-Odaib, A.; Amouyel, P.; Andersson, E.A.; Bennett, A.J.; Blakemore, A.I.F.; Buxton, J.L.; Dallongeville, J.; Das, S.; de Geus, E.J.C.; Estivill, X.; Flexeder, C.; Froguel, P.; Geller, F.; Godfrey, K.M.; Gottrand, F.; Groves, C.J.; Hansen, T.; Hirschhorn, J.N.; Hofman, A.; Hollegaard, M.V.; Hougaard, D. M.; Hyppönen, E.; Inskip, H.M.; Isaacs, A.; Jørgensen, T.; Kanaka-Gantenbein, C.; Kemp, J.P.; Kiess, W.; Kilpeläinen, T.O.; Klopp, N.; Knight, B.A.; Kuzawa, C.W.; McMahon, G.; Newnham, J.P.; Niinikoski, H.; Oostra, B.A.; Pedersen, L.; Postma, D.S.; Ring, S.M.; Rivadeneira, F.; Robertson, N.R.; Sebert, S.; Simell, O.; Slowinski, T.; Tiesler, C.M.T.; Tönjes, A.; Vaag, A.A.; Viikari, J.S.; Vink, J.M.; Vissing, N.H.; Wareham, N.J.; Willemsen, G.; Witte, D.R.; Zhang, H.; Zhao, J.; Wilson, J.F.; Stumvoll, M.; Prentice, A.M.; Meyer, B.F.; Pearson, E.R.; Boreham, C.A.; Cooper, C.; Gillman, M.W.; Dedoussis, G.V.; Moreno, L.A.; Pedersen, O.; Saarinen, M.; Mohlke, K.L.; Boomsma, D.I.; Saw, S.M.; Lakka, T.A.; Körner, A.; Loos, R.J.; Ong, K.K.; Vollenweider, P.; van Duijn, C.M.; Koppelman, G.H.; Hattersley, A.T.; Holloway, J.W.; Hocher, B.; Heinrich, J.; Power, C.; Melbye, M.; Guxens, M.; Pennell, C.E.; Bønnelykke, K.; Bisgaard, H.; Eriksson, J.G.; Widén, E.; Hakonarson, H.; Uitterlinden, A.G.; Pouta, A.; Lawlor, D.A.; Smith, G.D.; Frayling, T.M.; McCarthy, M.I.; Grant, S.F.; Jaddoe, V.W.; Järvelin, M.R.; Timpson, N.J.; Prokopenko, I.; Freathy, R.M.

    2013-01-01

    Birth weight within the normal range is associated with a variety of adult-onset diseases, but the mechanisms behind these associations are poorly understood. Previous genome-wide association studies of birth weight identified a variant in the ADCY5 gene associated both with birth weight and type 2

  15. One-stage closure of isolated cleft palate with the Veau-Wardill-Kilner V to Y pushback procedure or the Cronin modification. II. Height, weight and comparison of dental arches.

    Science.gov (United States)

    Heliövaara, A; Pere, A; Ranta, R

    1994-03-01

    The body height and weight, and sizes of dental arches in 116 patients with isolated cleft palate were evaluated at 16.9-20.6 years of age. One-stage closure of the soft and hard palate had been done at a mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. The height attained in both the boys (177.6 cm) and the girls (165.7 cm) was similar to that in the general adult population, even though half of the boys had not reached their final height. The median relative weight for height and sex was 6%. There were no significant differences in dental arch measurements depending on the method of operation but the more palatal operations done the shorter the maxillary and mandibular dental arch widths. The extent of cleft made a significant difference, larger clefts having narrower palatal intercanine widths. Dental arch dimensions were consistently larger in boys than in girls.

  16. [Concordance between self-reported weight and height for nutritional assessment in adults aged between 25 and 50 years without higher education].

    Science.gov (United States)

    Matínez-Torres, Javier; Lee Osorno, Belinda Inés; Mendoza, Leylis; Mariotta, Sharom; López Epiayu, Yandra; Martínez, Yelitza; Jiménez, Nelly

    2014-11-01

    Overweight and obesity are metabolic disorders that have become a public health problem due to the current high prevalence; therefore, it is important to create simple monitoring systems to assess their trends. To determine the correlation between weight, height and body mass index reported by patients and the values measured directly in adults between 25 and 50 years old without higher education. A cross-sectional descriptive study was conducted with participation of 207 adults between 25 and 50 years old. Each participant was asked weight and height; and body mass index was calculated with these data. Moreover, a qualified person determined the real value of these variables. The coefficient of intra-class correlation between self-reported and measurements was obtained. The body mass index measured for men was 25.8±3.7 kg/m2 and for women 26.0±4.1 kg/m2. Intraclass correlation coefficients were for weight 0.962 (IC95%: 0.950-0.971), height 0.909 (IC95%: 0.882-0.930), and body mass index 0.929 (IC95% 0.907-0.945); the real prevalence of people with a body mass index greater than 25 kg/m2 was 52.1%, whereas the value obtained by self-reported data was 44%. Self-reported weight and height data are useful for obesity assessment in adults aged between 25 and 50 years without higher education at the population level. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  17. Male sex, height, weight, and body mass index can increase external pressure to calf region using knee-crutch-type leg holder system in lithotomy position.

    Science.gov (United States)

    Mizuno, Ju; Takahashi, Toru

    2016-01-01

    Well-leg compartment syndrome (WLCS) is one of the catastrophic complications related to prolonged surgical procedures performed in the lithotomy position, using a knee-crutch-type leg holder (KCLH) system, to support the popliteal fossae and calf regions. Obesity has been implicated as a risk factor in the lithotomy position-related WLCS during surgery. In the present study, we investigated the relationship between the external pressure (EP) applied to the calf region using a KCLH system in the lithotomy position and selected physical characteristics. Twenty-one young, healthy volunteers (21.4±0.5 years of age, eleven males and ten females) participated in this study. The KCLH system used was Knee Crutch(®). We assessed four types of EPs applied to the calf region: box pressure, peak box pressure, contact pressure, and peak contact pressure, using pressure-distribution measurement system (BIG-MAT(®)). Relationships between these four EPs to the calf regions of both lower legs and a series of physical characteristics (sex, height, weight, and body mass index [BMI]) were analyzed. All four EPs applied to the bilateral calf regions were higher in males than in females. For all subjects, significant positive correlations were observed between all four EPs and height, weight, and BMI. EP applied to the calf region is higher in males than in females when the subject is supported by a KCLH system in the lithotomy position. In addition, EP increases with the increase in height, weight, and BMI. Therefore, male sex, height, weight, and BMI may contribute to the risk of inducing WLCS.

  18. INFLUENCE OF BODY HEIGHT, BODY WEIGHT AND THE AGE ON THE RESULTS ACHIEVED BY MAN-MARATHONERS IN A MARATHON RACE

    OpenAIRE

    Naser Rašiti Naser; Vlora Ajvazi; Adem Nura; Halim Hajredini

    2011-01-01

    The research is conducted on a sample of 100 successful man marathoners who has taken part in ten of the most popular marathon races. The sample of entities includes ten of the best placed marathoners in each race held during the year 2008. The aim of the research is to assess the influence of the body height, weight and the age of the marathoners on the final result in the race. The collected data is processed by the basic descriptive parameters. The entities have the average weight of 56.94...

  19. Relationship of weight, height, and body mass index with fracture risk at different sites in postmenopausal women: the Global Longitudinal study of Osteoporosis in Women (GLOW).

    Science.gov (United States)

    Compston, Juliet E; Flahive, Julie; Hosmer, David W; Watts, Nelson B; Siris, Ethel S; Silverman, Stuart; Saag, Kenneth G; Roux, Christian; Rossini, Maurizio; Pfeilschifter, Johannes; Nieves, Jeri W; Netelenbos, J Coen; March, Lyn; LaCroix, Andrea Z; Hooven, Frederick H; Greenspan, Susan L; Gehlbach, Stephen H; Díez-Pérez, Adolfo; Cooper, Cyrus; Chapurlat, Roland D; Boonen, Steven; Anderson, Frederick A; Adami, Silvano; Adachi, Jonathan D

    2014-02-01

    Low body mass index (BMI) is a well-established risk factor for fracture in postmenopausal women. Height and obesity have also been associated with increased fracture risk at some sites. We investigated the relationships of weight, BMI, and height with incident clinical fracture in a practice-based cohort of postmenopausal women participating in the Global Longitudinal study of Osteoporosis in Women (GLOW). Data were collected at baseline and at 1, 2, and 3 years. For hip, spine, wrist, pelvis, rib, upper arm/shoulder, clavicle, ankle, lower leg, and upper leg fractures, we modeled the time to incident self-reported fracture over a 3-year period using the Cox proportional hazards model and fitted the best linear or nonlinear models containing height, weight, and BMI. Of 52,939 women, 3628 (6.9%) reported an incident clinical fracture during the 3-year follow-up period. Linear BMI showed a significant inverse association with hip, clinical spine, and wrist fractures: adjusted hazard ratios (HRs) (95% confidence intervals [CIs]) per increase of 5 kg/m(2) were 0.80 (0.71-0.90), 0.83 (0.76-0.92), and 0.88 (0.83-0.94), respectively (all p fractures, linear weight showed a significant positive association: adjusted HR per 5-kg increase 1.05 (1.02-1.07) (p fractures, only linear height was significantly associated: adjusted HRs per 10-cm increase were 0.85 (0.75-0.97) (p = 0.02) and 0.73 (0.57-0.92) (p = 0.009), respectively. For pelvic and rib fractures, the best models were for nonlinear BMI or weight (p = 0.05 and 0.03, respectively), with inverse associations at low BMI/body weight and positive associations at high values. These data demonstrate that the relationships between fracture and weight, BMI, and height are site-specific. The different associations may be mediated, at least in part, by effects on bone mineral density, bone structure and geometry, and patterns of falling. © 2014 American Society for Bone and Mineral Research.

  20. Fruit and nut weight in pecan trees canopies in relation to the severity of pecan scab at different heights

    Science.gov (United States)

    Fusicladium effusum is the cause of pecan scab, the most destructive disease of pecan in the southeastern US. This study addressed the distribution of scab and measures of yield in relation to sample height in tall trees (14 to 16 m tall) in three experiments in 2010 and 2011 with trees receiving fu...

  1. Evidence of radiation-induced reduction of height and body weight from repeated measurements of adults exposed in childhood to the atomic bombs

    International Nuclear Information System (INIS)

    Otake, Masanori; Funamoto, Sachiyo; Fujikoshi, Yasunori; Schull, W.J.

    1994-01-01

    Reduction of growth from exposure to atomic bomb radiation has been examined using individuals under 10 years old at the time of the bombing (ATB) and a growth curve analysis based on measurements of height and weight made in the course of the 4th-7th cycles of the Adult Health Study examinations (1964-1972). As expected, the largest difference in growth to emerge is between males and females. However, a highly significant reduction of growth associated with dose (DS86) was observed among those survivors for whom four repeated measurements of height and weight were available. Longitudinal analysis of a more extended data set (n = 821), using expected values based on simple linear regression models fitted to the three available sets of measurements of height and weight on the 254 individuals with a missing measurement, also indicates a significant radiation-related growth reduction. The possible contribution of such factors as poor nutrition and disruption of normal family life in the years immediately after the war is difficult to evaluate, but the effects of socioeconomic factors on the analysis of these data are discussed. 33 refs., 5 figs., 3 tabs

  2. Calculation of optimal gestation weight gain in pre-pregnancy underweight women due to body mass index change in relation to mother's height.

    Science.gov (United States)

    Meštrović, Zoran; Roje, Damir; Vulić, Marko; Zec, Mirela

    2017-01-01

    Optimal gestational weight gain has not yet been clearly defined and remains one of the most controversial issues in modern perinatology. The role of optimal weight gain during pregnancy is critical, as it has a strong effect on perinatal outcomes. In this study, gestational body mass index (BMI) change, accounting for maternal height, was investigated as a new criterion for gestational weight gain determination, in the context of fetal growth assessment. We had focused on underweight women only, and aimed to assess whether the Institute of Medicine (IOM) guidelines could be considered acceptable or additional corrections are required in this subgroup of women. The study included 1205 pre-pregnancy underweight mothers and their neonates. Only mothers with singleton term pregnancies (37th-42nd week of gestation) with pre-gestational BMI gestational age (SGA) infants in the study population was 16.2 %. Our results showed the minimal recommended gestational weight gain of 12-14 kg and BMI change of 4-5 kg/m 2 to be associated with a lower prevalence of SGA newborns. Based on our results, the recommended upper limit of gestational mass change could definitely be substantially higher. Optimal weight gain in underweight women could be estimated in the very beginning of pregnancy as recommended BMI change, but recalculated in kilograms according to body height, which modulates the numerical calculation of BMI. Our proposal presents a further step forward towards individualized approach for each pregnant woman.

  3. A Bayesian Method for Weighted Sampling

    OpenAIRE

    Lo, Albert Y.

    1993-01-01

    Bayesian statistical inference for sampling from weighted distribution models is studied. Small-sample Bayesian bootstrap clone (BBC) approximations to the posterior distribution are discussed. A second-order property for the BBC in unweighted i.i.d. sampling is given. A consequence is that BBC approximations to a posterior distribution of the mean and to the sampling distribution of the sample average, can be made asymptotically accurate by a proper choice of the random variables that genera...

  4. Method for Pre-Conditioning a Measured Surface Height Map for Model Validation

    Science.gov (United States)

    Sidick, Erkin

    2012-01-01

    This software allows one to up-sample or down-sample a measured surface map for model validation, not only without introducing any re-sampling errors, but also eliminating the existing measurement noise and measurement errors. Because the re-sampling of a surface map is accomplished based on the analytical expressions of Zernike-polynomials and a power spectral density model, such re-sampling does not introduce any aliasing and interpolation errors as is done by the conventional interpolation and FFT-based (fast-Fourier-transform-based) spatial-filtering method. Also, this new method automatically eliminates the measurement noise and other measurement errors such as artificial discontinuity. The developmental cycle of an optical system, such as a space telescope, includes, but is not limited to, the following two steps: (1) deriving requirements or specs on the optical quality of individual optics before they are fabricated through optical modeling and simulations, and (2) validating the optical model using the measured surface height maps after all optics are fabricated. There are a number of computational issues related to model validation, one of which is the "pre-conditioning" or pre-processing of the measured surface maps before using them in a model validation software tool. This software addresses the following issues: (1) up- or down-sampling a measured surface map to match it with the gridded data format of a model validation tool, and (2) eliminating the surface measurement noise or measurement errors such that the resulted surface height map is continuous or smoothly-varying. So far, the preferred method used for re-sampling a surface map is two-dimensional interpolation. The main problem of this method is that the same pixel can take different values when the method of interpolation is changed among the different methods such as the "nearest," "linear," "cubic," and "spline" fitting in Matlab. The conventional, FFT-based spatial filtering method used to

  5. Accuracy and usefulness of BMI measures based on self-reported weight and height: findings from the NHANES & NHIS 2001-2006.

    Science.gov (United States)

    Stommel, Manfred; Schoenborn, Charlotte A

    2009-11-19

    The Body Mass Index (BMI) based on self-reported height and weight ("self-reported BMI") in epidemiologic studies is subject to measurement error. However, because of the ease and efficiency in gathering height and weight information through interviews, it remains important to assess the extent of error present in self-reported BMI measures and to explore possible adjustment factors as well as valid uses of such self-reported measures. Using the combined 2001-2006 data from the continuous National Health and Nutrition Examination Survey, discrepancies between BMI measures based on self-reported and physical height and weight measures are estimated and socio-demographic predictors of such discrepancies are identified. Employing adjustments derived from the socio-demographic predictors, the self-reported measures of height and weight in the 2001-2006 National Health Interview Survey are used for population estimates of overweight & obesity as well as the prediction of health risks associated with large BMI values. The analysis relies on two-way frequency tables as well as linear and logistic regression models. All point and variance estimates take into account the complex survey design of the studies involved. Self-reported BMI values tend to overestimate measured BMI values at the low end of the BMI scale ( 28. The discrepancies also vary systematically with age (younger and older respondents underestimate their BMI more than respondents aged 42-55), gender and the ethnic/racial background of the respondents. BMI scores, adjusted for socio-demographic characteristics of the respondents, tend to narrow, but do not eliminate misclassification of obese people as merely overweight, but health risk estimates associated with variations in BMI values are virtually the same, whether based on self-report or measured BMI values. BMI values based on self-reported height and weight, if corrected for biases associated with socio-demographic characteristics of the survey

  6. A novel method of basal crevasse height estimation and subsequent rifting

    Science.gov (United States)

    Logan, L.; Catania, G. A.; Lavier, L. L.; Choi, E.

    2012-12-01

    Basal crevasses may play an important precursory role in the location and propagation of rifts and in ice shelf disintegration. Here we develop a novel method for estimating the locations and heights of basal crevasses formed at the grounding line of ice shelves and ice streams. We assume a thin-elastic beam formulation (TEB) with a tensional plastic yielding criterion to capture the physics of a tidally flexed grounding line. Observations of basal crevasses in the Siple Coast area match well with predictions produced by this method. Areas with large misfit can be delineated by examining the strain rate field; indeed, in our estimations those crevasses which deviate most from the TEB prediction lie directly in a shear margin. We test the method against other areas in the Larsen Ice Shelf, and find again a good match. Thus we suggest the TEB as an alternative to other crevasse estimation methods, as it produces a good fit in predominantly tensile regions, requires no tuning or prior information, and is computationally free to implement into large scale ice models which aim at physically simulating calving and fracture processes. We pursue modeling basal crevasses as they evolve with a thermomechanical finite-difference 3-dimensional model called SNAC. Viscoelastoplastic ice follows Mohr-Coulomb tension failure with Glen's flow law. We examine the conditions necessary for a basal crevasse formed on the downstream side of an ice rise to propagate the full thickness of the ice, developing into a rift.

  7. Weighted particle method for solving the Boltzmann equation

    International Nuclear Information System (INIS)

    Tohyama, M.; Suraud, E.

    1990-01-01

    We propose a new, deterministic, method of solution of the nuclear Boltzmann equation. In this Weighted Particle Method two-body collisions are treated by a Master equation for an occupation probability of each numerical particle. We apply the method to the quadrupole motion of 12 C. A comparison with usual stochastic methods is made. Advantages and disadvantages of the Weighted Particle Method are discussed

  8. A rigorous assessment of tree height measurements obtained using airborne LIDAR and conventional field methods.

    Science.gov (United States)

    Hans-Erik Andersen; Stephen E. Reutebuch; Robert J. McGaughey

    2006-01-01

    Tree height is an important variable in forest inventory programs but is typically time-consuming and costly to measure in the field using conventional techniques. Airborne light detection and ranging (LIDAR) provides individual tree height measurements that are highly correlated with field-derived measurements, but the imprecision of conventional field techniques does...

  9. Weight-training injuries. Common injuries and preventative methods.

    Science.gov (United States)

    Mazur, L J; Yetman, R J; Risser, W L

    1993-07-01

    The use of weights is an increasingly popular conditioning technique, competitive sport and recreational activity among children, adolescents and young adults. Weight-training can cause significant musculoskeletal injuries such as fractures, dislocations, spondylolysis, spondylolisthesis, intervertebral disk herniation, and meniscal injuries of the knee. Although injuries can occur during the use of weight machines, most apparently happen during the aggressive use of free weights. Prepubescent and older athletes who are well trained and supervised appear to have low injury rates in strength training programmes. Good coaching and proper weightlifting techniques and other injury prevention methods are likely to minimise the number of musculoskeletal problems caused by weight-training.

  10. Rapid fabrication method of a microneedle mold with controllable needle height and width.

    Science.gov (United States)

    Lin, Yen-Heng; Lee, I-Chi; Hsu, Wei-Chieh; Hsu, Ching-Hong; Chang, Kai-Ping; Gao, Shao-Syuan

    2016-10-01

    The main issue of transdermal drug delivery is that macromolecular drugs cannot diffuse through the stratum corneum of skin. Many studies have pursued micro-sized needles encapsulated with drugs to overcome this problem, as these needles can pierce the stratum corneum and allow drugs to enter the circulatory system of the human body. However, most microneedle fabrication processes are time-consuming and require expensive equipment. In this study, we demonstrate a rapid method for fabricating a microneedle mold using drawing lithography and a UV-cured resin. The mold was filled with a water-soluble material, polyvinylpyrrolidone (PVP), which was then demolded to produce a water-soluble microneedle array. The results of an in vitro skin insertion test using PVP microneedles and pig ear skin demonstrated the feasibility of the microneedle mold. In addition, by controlling the viscosity of the UV-cured resin through various heat treatments, microneedles with different heights and aspect ratios were produced. Compared with other methods, this technology significantly simplifies and accelerates the mold fabrication process. In addition, the required equipment is relatively simple and inexpensive. Through this technology, we can rapidly fabricate microneedle molds with controllable dimensions for various applications.

  11. Prevalence of overweight and obesity on the island of Ireland: results from the North South Survey of Children's Height, Weight and Body Mass Index, 2002.

    LENUS (Irish Health Repository)

    Whelton, Helen

    2007-01-01

    BACKGROUND: Childhood obesity is emerging as a major public health problem in developed and developing countries worldwide. The aim of this survey was to establish baseline data on the prevalence and correlates of overweight and obesity among children and adolescents in the Republic of Ireland (RoI) and Northern Ireland (NI). METHODS: The heights and weights of 19,617 school-going children and adolescents aged between 4 and 16 years in NI and RoI were measured using standardised and calibrated scales and measures. The participants were a representative cross-sectional sample of children randomly selected on the basis of age, gender and geographical location of the school attended. Overweight and obesity were classified according to standard IOTF criteria. RESULTS: Males were taller than females, children in RoI were taller than those in NI and the more affluent were taller than the less well off. The overall prevalence of overweight and obesity was higher among females than males in both jurisdictions. Overall, almost one in four boys (23% RoI and NI) and over one in four girls (28% RoI, 25% NI) were either overweight or obese. In RoI, the highest prevalence of overweight was among 13 year old girls (32%) and obesity among 7 year old girls (11%). In NI the highest prevalence of overweight and obesity were found among 11 and 8 year old girls respectively (33% and 13%). CONCLUSION: These figures confirm the emergence of the obesity epidemic among children in Ireland, a wealthy country with the European Union. The results serve to underpin the urgency of implementing broad intersectoral measures to reduce calorie intake and increase levels of physical activity, particularly among children.

  12. Prevalence of overweight and obesity on the island of Ireland: results from the North South Survey of Children's Height, Weight and Body Mass Index, 2002

    Directory of Open Access Journals (Sweden)

    Kelleher Virginia

    2007-07-01

    Full Text Available Abstract Background Childhood obesity is emerging as a major public health problem in developed and developing countries worldwide. The aim of this survey was to establish baseline data on the prevalence and correlates of overweight and obesity among children and adolescents in the Republic of Ireland (RoI and Northern Ireland (NI. Methods The heights and weights of 19,617 school-going children and adolescents aged between 4 and 16 years in NI and RoI were measured using standardised and calibrated scales and measures. The participants were a representative cross-sectional sample of children randomly selected on the basis of age, gender and geographical location of the school attended. Overweight and obesity were classified according to standard IOTF criteria. Results Males were taller than females, children in RoI were taller than those in NI and the more affluent were taller than the less well off. The overall prevalence of overweight and obesity was higher among females than males in both jurisdictions. Overall, almost one in four boys (23% RoI and NI and over one in four girls (28% RoI, 25% NI were either overweight or obese. In RoI, the highest prevalence of overweight was among 13 year old girls (32% and obesity among 7 year old girls (11%. In NI the highest prevalence of overweight and obesity were found among 11 and 8 year old girls respectively (33% and 13%. Conclusion These figures confirm the emergence of the obesity epidemic among children in Ireland, a wealthy country with the European Union. The results serve to underpin the urgency of implementing broad intersectoral measures to reduce calorie intake and increase levels of physical activity, particularly among children.

  13. Pregnancy outcomes related to gestational weight gain in women defined by their body mass index, parity, height, and smoking status

    DEFF Research Database (Denmark)

    Nøhr, Ellen Aagaard; Vaeth, Michael; Baker, Jennifer L

    2009-01-01

    BACKGROUND: Recommendations for gestational weight gain (GWG) account for a woman's prepregnancy body mass index (BMI), but other factors may be important. OBJECTIVES: The objectives were to investigate whether, within BMI categories, the GWG with the lowest risks to mother and infant varied with...

  14. New weighting methods for phylogenetic tree reconstruction using multiple loci.

    Science.gov (United States)

    Misawa, Kazuharu; Tajima, Fumio

    2012-08-01

    Efficient determination of evolutionary distances is important for the correct reconstruction of phylogenetic trees. The performance of the pooled distance required for reconstructing a phylogenetic tree can be improved by applying large weights to appropriate distances for reconstructing phylogenetic trees and small weights to inappropriate distances. We developed two weighting methods, the modified Tajima-Takezaki method and the modified least-squares method, for reconstructing phylogenetic trees from multiple loci. By computer simulations, we found that both of the new methods were more efficient in reconstructing correct topologies than the no-weight method. Hence, we reconstructed hominoid phylogenetic trees from mitochondrial DNA using our new methods, and found that the levels of bootstrap support were significantly increased by the modified Tajima-Takezaki and by the modified least-squares method.

  15. Improved retrieval of cloud base heights from ceilometer using a non-standard instrument method

    Science.gov (United States)

    Wang, Yang; Zhao, Chuanfeng; Dong, Zipeng; Li, Zhanqing; Hu, Shuzhen; Chen, Tianmeng; Tao, Fa; Wang, Yuzhao

    2018-04-01

    Cloud-base height (CBH) is a basic cloud parameter but has not been measured accurately, especially under polluted conditions due to the interference of aerosol. Taking advantage of a comprehensive field experiment in northern China in which a variety of advanced cloud probing instruments were operated, different methods of detecting CBH are assessed. The Micro-Pulse Lidar (MPL) and the Vaisala ceilometer (CL51) provided two types of backscattered profiles. The latter has been employed widely as a standard means of measuring CBH using the manufacturer's operational algorithm to generate standard CBH products (CL51 MAN) whose quality is rigorously assessed here, in comparison with a research algorithm that we developed named value distribution equalization (VDE) algorithm. It was applied to both the profiles of lidar backscattering data from the two instruments. The VDE algorithm is found to produce more accurate estimates of CBH for both instruments and can cope with heavy aerosol loading conditions well. By contrast, CL51 MAN overestimates CBH by 400 m and misses many low level clouds under such conditions. These findings are important given that CL51 has been adopted operationally by many meteorological stations in China.

  16. Development of methods for inferring cloud thickness and cloud-base height from satellite radiance data

    Science.gov (United States)

    Smith, William L., Jr.; Minnis, Patrick; Alvarez, Joseph M.; Uttal, Taneil; Intrieri, Janet M.; Ackerman, Thomas P.; Clothiaux, Eugene

    1993-01-01

    Cloud-top height is a major factor determining the outgoing longwave flux at the top of the atmosphere. The downwelling radiation from the cloud strongly affects the cooling rate within the atmosphere and the longwave radiation incident at the surface. Thus, determination of cloud-base temperature is important for proper calculation of fluxes below the cloud. Cloud-base altitude is also an important factor in aircraft operations. Cloud-top height or temperature can be derived in a straightforward manner using satellite-based infrared data. Cloud-base temperature, however, is not observable from the satellite, but is related to the height, phase, and optical depth of the cloud in addition to other variables. This study uses surface and satellite data taken during the First ISCCP Regional Experiment (FIRE) Phase-2 Intensive Field Observation (IFO) period (13 Nov. - 7 Dec. 1991, to improve techniques for deriving cloud-base height from conventional satellite data.

  17. Weight-Control Methods, 3-Year Weight Change, and Eating Behaviors: A Prospective Nationwide Study of Middle-Aged New Zealand Women.

    Science.gov (United States)

    Leong, Sook Ling; Gray, Andrew; Haszard, Jillian; Horwath, Caroline

    2016-08-01

    The effectiveness of women's weight-control methods and the influences of dieting on eating behaviors remain unclear. Our aim was to determine the association of various weight-control methods at baseline with weight change to 3 years, and examine the association between baseline weight-control status (trying to lose weight, trying to prevent weight gain or no weight-control attempts) and changes in intuitive eating and binge eating at 3 years. A nationally representative sample of 1,601 New Zealand women (40 to 50 years) was recruited and completed a self-administered questionnaire at baseline regarding use of variety of weight-control methods. Information on demographic characteristics, weight, height, food habits, binge eating, and intuitive eating were collected at baseline and 3 years. Linear and logistic regression models examined associations between both weight status and weight-control methods at baseline and weight change to 3 years; and baseline weight-control status and change in intuitive eating from baseline to 3 years and binge eating at 3 years. χ(2) tests were used to cross-sectionally compare food habits across the weight status categories at both baseline and 3 years. Trying to lose weight and the use of weight-control methods at baseline were not associated with change in body weight to 3 years. There were a few differences in the frequency of consumption of high-energy-density foods between those trying to lose or maintain weight and those not attempting weight control. Trying to lose weight at baseline was associated with a 2.0-unit (95% CI 0.7 to 3.4, P=0.003) reduction in intuitive eating scores by 3 years (potential range=21 to 105), and 224% (odds ratio=3.24; 95% CI 1.69 to 6.20; Pfoods. Dieting may reduce women's ability to recognize hunger and satiety cues and place women at increased risk of binge eating. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  18. How recalibration method, pricing, and coding affect DRG weights

    Science.gov (United States)

    Carter, Grace M.; Rogowski, Jeannette A.

    1992-01-01

    We compared diagnosis-related group (DRG) weights calculated using the hospital-specific relative-value (HSR V) methodology with those calculated using the standard methodology for each year from 1985 through 1989 and analyzed differences between the two methods in detail for 1989. We provide evidence suggesting that classification error and subsidies of higher weighted cases by lower weighted cases caused compression in the weights used for payment as late as the fifth year of the prospective payment system. However, later weights calculated by the standard method are not compressed because a statistical correlation between high markups and high case-mix indexes offsets the cross-subsidization. HSR V weights from the same files are compressed because this methodology is more sensitive to cross-subsidies. However, both sets of weights produce equally good estimates of hospital-level costs net of those expenses that are paid by outlier payments. The greater compression of the HSR V weights is counterbalanced by the fact that more high-weight cases qualify as outliers. PMID:10127456

  19. A novel weight determination method for time series data aggregation

    Science.gov (United States)

    Xu, Paiheng; Zhang, Rong; Deng, Yong

    2017-09-01

    Aggregation in time series is of great importance in time series smoothing, predicting and other time series analysis process, which makes it crucial to address the weights in times series correctly and reasonably. In this paper, a novel method to obtain the weights in time series is proposed, in which we adopt induced ordered weighted aggregation (IOWA) operator and visibility graph averaging (VGA) operator and linearly combine the weights separately generated by the two operator. The IOWA operator is introduced to the weight determination of time series, through which the time decay factor is taken into consideration. The VGA operator is able to generate weights with respect to the degree distribution in the visibility graph constructed from the corresponding time series, which reflects the relative importance of vertices in time series. The proposed method is applied to two practical datasets to illustrate its merits. The aggregation of Construction Cost Index (CCI) demonstrates the ability of proposed method to smooth time series, while the aggregation of The Taiwan Stock Exchange Capitalization Weighted Stock Index (TAIEX) illustrate how proposed method maintain the variation tendency of original data.

  20. The sine method as a more accurate height predictor for hardwoods

    Science.gov (United States)

    Don C. Bragg

    2007-01-01

    Most hypsometers apply a mathematical technique that utilizes the tangent of angles and a horizontal distance to deliver the exact height of a tree under idealized circumstances. Unfortunately, these conditions are rarely met for hardwoods in the field. A “new” predictor based on sine and slope distance and discussed here does not require the same assumptions for...

  1. The Merkel equation revisited: A novel method to compute the packed height of a cooling tower

    International Nuclear Information System (INIS)

    Picardo, J.R.; Variyar, J.E.

    2012-01-01

    Highlights: ► A relationship between packed height and excess air flow rate is derived. ► The relationship is independent of tower diameter and water flow rate. ► It is well approximated by a power law curve for industrially relevant cases. ► An algorithm to compute the thermodynamic minimum air flow rate is detailed. ► Computation of the packed height is simplified especially for design-optimization. - Abstract: In this work, a new methodology of analysis and computation is presented which simplifies calculation of the packed height in a counter current cooling tower, especially for design and cost optimization studies. An algorithm is presented with an implementation in MATLAB to compute the thermodynamic minimum air flow rate for the desired cooling. Combining the Merkel equation and a standard empirical mass transfer correlation, the packed height is shown to be independent of the water flow rate and tower diameter, and dependent only on the excess air flow. The relationship is unique for a given cooling range of water and inlet air wet bulb temperature. A simple power law regression is used to approximate this relationship and results are presented for Vertical Corrugated Packing.

  2. Methods of fetal MR: beyond T2-weighted imaging

    Energy Technology Data Exchange (ETDEWEB)

    Brugger, Peter C. [Center of Anatomy and Cell Biology, Integrative Morphology Group, Medical University of Vienna, Waehringerstrasse 13, 1090 Vienna (Austria)]. E-mail: peter.brugger@meduniwien.ac.at; Stuhr, Fritz [Department of Radiology, Medical University of Vienna, Waehringerguertel 18-20, 1090 Vienna (Austria); Lindner, Christian [Department of Radiology, Medical University of Vienna, Waehringerguertel 18-20, 1090 Vienna (Austria); Prayer, Daniela [Department of Radiology, Medical University of Vienna, Waehringerguertel 18-20, 1090 Vienna (Austria)

    2006-02-15

    The present work reviews the basic methods of performing fetal magnetic resonance imaging (MRI). Since fetal MRI differs in many respects from a postnatal study, several factors have to be taken into account to achieve satisfying image quality. Image quality depends on adequate positioning of the pregnant woman in the magnet, use of appropriate coils and the selection of sequences. Ultrafast T2-weighted sequences are regarded as the mainstay of fetal MR-imaging. However, additional sequences, such as T1-weighted images, diffusion-weighted images, echoplanar imaging may provide further information, especially in extra- central-nervous system regions of the fetal body.

  3. Methods of fetal MR: beyond T2-weighted imaging

    International Nuclear Information System (INIS)

    Brugger, Peter C.; Stuhr, Fritz; Lindner, Christian; Prayer, Daniela

    2006-01-01

    The present work reviews the basic methods of performing fetal magnetic resonance imaging (MRI). Since fetal MRI differs in many respects from a postnatal study, several factors have to be taken into account to achieve satisfying image quality. Image quality depends on adequate positioning of the pregnant woman in the magnet, use of appropriate coils and the selection of sequences. Ultrafast T2-weighted sequences are regarded as the mainstay of fetal MR-imaging. However, additional sequences, such as T1-weighted images, diffusion-weighted images, echoplanar imaging may provide further information, especially in extra- central-nervous system regions of the fetal body

  4. Revision 1 size and position of the healthy meniscus, and its correlation with sex, height, weight, and bone area- a cross-sectional study.

    Science.gov (United States)

    Bloecker, Katja; Englund, Martin; Wirth, Wolfgang; Hudelmaier, Martin; Burgkart, Rainer; Frobell, Richard B; Eckstein, Felix

    2011-10-28

    Meniscus extrusion or hypertrophy may occur in knee osteoarthritis (OA). However, currently no data are available on the position and size of the meniscus in asymptomatic men and women with normal meniscus integrity. Three-dimensional coronal DESSwe MRIs were used to segment and quantitatively measure the size and position of the medial and lateral menisci, and their correlation with sex, height, weight, and tibial plateau area. 102 knees (40 male and 62 female) were drawn from the Osteoarthritis Initiative "non-exposed" reference cohort, including subjects without symptoms, radiographic signs, or risk factors for knee OA. Knees with MRI signs of meniscus lesions were excluded. The tibial plateau area was significantly larger (p sexes, and that tibial coverage by the meniscus is similar between men and women.

  5. Effective method to control the levitation force and levitation height in a superconducting maglev system

    International Nuclear Information System (INIS)

    Yang Peng-Tao; Yang Wan-Min; Wang Miao; Li Jia-Wei; Guo Yu-Xia

    2015-01-01

    The influence of the width of the middle magnet in the permanent magnet guideways (PMGs) on the levitation force and the levitation height of single-domain yttrium barium copper oxide (YBCO) bulks has been investigated at 77 K under the zero field cooled (ZFC) state. It is found that the largest levitation force can be obtained in the system with the width of the middle magnet of the PMG equal to the size of the YBCO bulk when the gap between the YBCO bulk and PMG is small. Both larger levitation force and higher levitation height can be obtained in the system with the width of the middle magnet of the PMG larger than the size of the YBCO bulk. The stiffness of the levitation force between the PMG and the YBCO bulk is higher in the system with a smaller width of the middle magnet in the PMG. These results provide an effective way to control the levitation force and the levitation height for the superconducting maglev design and applications. (paper)

  6. Maternal nutritional status (as measured by height, weight and BMI) in Bangladesh: trends and socio-economic association over the period 1996 to 2007.

    Science.gov (United States)

    Mohsena, Masuda; Goto, Rie; Mascie-Taylor, Cg Nicholas

    2016-06-01

    To analyse trends in maternal nutritional status in Bangladesh over a 12-year period and to examine the associations between nutritional status and socio-economic variables. Maternal nutritional status indicators were height, weight and BMI. Socio-economic variables used were region, residency, education and occupation of the mothers and their husbands, house type, and possession score in the household. Bangladesh Demographic and Health Surveys (1996, 2000, 2004 and 2007) were the source of data. A total of 16 278 mothers were included. All of the socio-economic variables showed significant associations with maternal nutritional status indicators. Regional variation was found to be present; all three indicators were found to be lowest in the Sylhet division. Upward trends in maternal height, weight and BMI were evident from no possessions to four possessions in households, and for no education to higher education of women and their husbands. Bangladeshi mothers measured in 2007 were found to be on average 0·34 cm taller and 3·36 kg heavier than mothers measured in 1996. Between 1996 and 2007 maternal underweight fell from nearly 50 % to just over 30 % while overweight and obesity increased from about 3 % to over 9 % (WHO cut-offs) or from 7 % to nearly 18 % (Asian cut-offs). The study reveals that over the 12-year period in Bangladesh there has been a substantial reduction in maternal underweight accompanied by a considerable increase in obesity. It is also evident that malnutrition in Bangladesh is a multidimensional problem that warrants a proper policy mix and programme intervention.

  7. Practicable group testing method to evaluate weight/weight GMO content in maize grains.

    Science.gov (United States)

    Mano, Junichi; Yanaka, Yuka; Ikezu, Yoko; Onishi, Mari; Futo, Satoshi; Minegishi, Yasutaka; Ninomiya, Kenji; Yotsuyanagi, Yuichi; Spiegelhalter, Frank; Akiyama, Hiroshi; Teshima, Reiko; Hino, Akihiro; Naito, Shigehiro; Koiwa, Tomohiro; Takabatake, Reona; Furui, Satoshi; Kitta, Kazumi

    2011-07-13

    Because of the increasing use of maize hybrids with genetically modified (GM) stacked events, the established and commonly used bulk sample methods for PCR quantification of GM maize in non-GM maize are prone to overestimate the GM organism (GMO) content, compared to the actual weight/weight percentage of GM maize in the grain sample. As an alternative method, we designed and assessed a group testing strategy in which the GMO content is statistically evaluated based on qualitative analyses of multiple small pools, consisting of 20 maize kernels each. This approach enables the GMO content evaluation on a weight/weight basis, irrespective of the presence of stacked-event kernels. To enhance the method's user-friendliness in routine application, we devised an easy-to-use PCR-based qualitative analytical method comprising a sample preparation step in which 20 maize kernels are ground in a lysis buffer and a subsequent PCR assay in which the lysate is directly used as a DNA template. This method was validated in a multilaboratory collaborative trial.

  8. Influence of the social and economical factors on the indicators of height and weight among the pupils, residents of the city and villages in eastern Georgia (Kakheti region).

    Science.gov (United States)

    Kharabadze, M; Khetsuriani, R; Betaneli, M; Mekokishvili, L; Chkuaseli, N

    2012-11-01

    The research has been held in the city and its villages among schoolgirls and schoolboys out of them are city (n=613) and village (n=241) residents. The body height and mass, was calculated according to standard methods. Also research based on questionnaires has been held .This research determines social-economic statement, physical activities and diets of students. Statistical processing of data was done with the help of statistic method ANOVA. Data compared to WHO child grows standard percentage-charts, and to percentile diagram made for georgian children and adolescents in 2001-2003. Concerning the height indexes stunting was noticed among the village resident girls at the age 9-14 (8,9%) and 9-11 year old boys (3,8%) and it also prevails among girls that require further researches to reveal reasons. Also the amount of law height index among girls and boys is high in the cities as well as villages although it prevails in the villages, mostly among boys (30, 8%). Comparing with village residents high height index prevails among the city resident boys (18,7%) and among girls (11, 9%), and higher than 97 percentile indexes is revealed among 4,9% of boys living in the city. Mass deficiency was reveled among the city girls 2,4 % and the village resident girls 5,1%; accordingly it is prevailed among girls living in the villages. Mass deficiency among the boys was only revealed among the city residents and it was 3,9 %. According to our data, decrease of the body mass average index is fixed among girls but among the boys it increase. and among 2,4% of girls. So village resident girls are shorter and thinner, but boys are short and overweight, comparing with the city residents. Research based on questionnaires showed that city resident school children food ration, whose social-economic condition is better, is rich with proteins, when majority of village residents food ration lack proteins and mostly consist of those products which are rich of carbohydrates. According to

  9. Wispy Prosthesis: A Novel Method in Denture Weight Reduction.

    Science.gov (United States)

    Anne, Gopinadh; Budeti, Sreedevi; Anche, Sampath Kumar; Zakkula, Srujana; Atla, Jyothi; Jyothula, Ravi Rakesh Dev; Appana, Krishna Chaitanya; Peddinti, Vijaya Kumar

    2016-04-01

    Stability and retention of the denture becomes at stake with the increase in weight of the denture prosthesis. As a consequence, different materials and methods have been introduced to overcome these issues but denture weight reduction still remains to be a cumbersome and strenuous procedure. To introduce a novel technique for the fabrication of denture prosthesis where in the weight of the denture will not affect the retention and stability of the denture. Four groups with a sample size of 10 each, were included where in one group was control and other three were study groups. The control group samples were made completely solid and the study group samples were packed with materials like bean balls, cellulose balls and polyacrylic fibers. The weight of all the samples of each study group was measured and compared with the control group. The observations were analyzed statistically by paired t-test. It was observed that the bean balls group produced a weight reduction of 31.3%, cellulose balls group 27.4% and polyacrylic fibers group 24.5% when compared to that of the control group. This novel technique will eliminate the problems that were associated in creating hollowness and at the same time will reduce the weight of the prosthesis and among all the study groups, bean balls group were found to reduce maximum weight of the prosthesis.

  10. Utility of waist-to-height ratio in assessing the status of central obesity and related cardiometabolic risk profile among normal weight and overweight/obese children: The Bogalusa Heart Study

    Directory of Open Access Journals (Sweden)

    Xu Jihua

    2010-10-01

    Full Text Available Abstract Background Body Mass Index (BMI is widely used to assess the impact of obesity on cardiometabolic risk in children but it does not always relate to central obesity and varies with growth and maturation. Waist-to-Height Ratio (WHtR is a relatively constant anthropometric index of abdominal obesity across different age, sex or racial groups. However, information is scant on the utility of WHtR in assessing the status of abdominal obesity and related cardiometabolic risk profile among normal weight and overweight/obese children, categorized according to the accepted BMI threshold values. Methods Cross-sectional cardiometabolic risk factor variables on 3091 black and white children (56% white, 50% male, 4-18 years of age were used. Based on the age-, race- and sex-specific percentiles of BMI, the children were classified as normal weight (5th - 85th percentiles and overweight/obese (≥ 85th percentile. The risk profiles of each group based on the WHtR ( Results 9.2% of the children in the normal weight group were centrally obese (WHtR ≥0.5 and 19.8% among the overweight/obese were not (WHtR Conclusion WHtR not only detects central obesity and related adverse cardiometabolic risk among normal weight children, but also identifies those without such conditions among the overweight/obese children, which has implications for pediatric primary care practice.

  11. Effective method to control the levitation force and levitation height in a superconducting maglev system

    Science.gov (United States)

    Yang, Peng-Tao; Yang, Wan-Min; Wang, Miao; Li, Jia-Wei; Guo, Yu-Xia

    2015-11-01

    The influence of the width of the middle magnet in the permanent magnet guideways (PMGs) on the levitation force and the levitation height of single-domain yttrium barium copper oxide (YBCO) bulks has been investigated at 77 K under the zero field cooled (ZFC) state. It is found that the largest levitation force can be obtained in the system with the width of the middle magnet of the PMG equal to the size of the YBCO bulk when the gap between the YBCO bulk and PMG is small. Both larger levitation force and higher levitation height can be obtained in the system with the width of the middle magnet of the PMG larger than the size of the YBCO bulk. The stiffness of the levitation force between the PMG and the YBCO bulk is higher in the system with a smaller width of the middle magnet in the PMG. These results provide an effective way to control the levitation force and the levitation height for the superconducting maglev design and applications. Project supported by the National Natural Science Foundation of China (Grant Nos. 51342001 and 50872079), the Key-grant Project of Chinese Ministry of Education (Grant No. 311033), the Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20120202110003), the Innovation Team in Shaanxi Province, China (Grant No. 2014KTC-18), and the Fundamental Research Funds for the Central Universities, China (Grant Nos. GK201101001 and GK201305014), and the Outstanding Doctoral Thesis Foundation Project of Shaanxi Normal University, China (Grant Nos. X2011YB08 and X2012YB05).

  12. Stochastic weighted particle methods for population balance equations

    International Nuclear Information System (INIS)

    Patterson, Robert I.A.; Wagner, Wolfgang; Kraft, Markus

    2011-01-01

    Highlights: → Weight transfer functions for Monte Carlo simulation of coagulation. → Efficient support for single-particle growth processes. → Comparisons to analytic solutions and soot formation problems. → Better numerical accuracy for less common particles. - Abstract: A class of coagulation weight transfer functions is constructed, each member of which leads to a stochastic particle algorithm for the numerical treatment of population balance equations. These algorithms are based on systems of weighted computational particles and the weight transfer functions are constructed such that the number of computational particles does not change during coagulation events. The algorithms also facilitate the simulation of physical processes that change single particles, such as growth, or other surface reactions. Four members of the algorithm family have been numerically validated by comparison to analytic solutions to simple problems. Numerical experiments have been performed for complex laminar premixed flame systems in which members of the class of stochastic weighted particle methods were compared to each other and to a direct simulation algorithm. Two of the weighted algorithms have been shown to offer performance advantages over the direct simulation algorithm in situations where interest is focused on the larger particles in a system. The extent of this advantage depends on the particular system and on the quantities of interest.

  13. Bilinear nodal transport method in weighted diamond difference form

    International Nuclear Information System (INIS)

    Azmy, Y.Y.

    1987-01-01

    Nodal methods have been developed and implemented for the numerical solution of the discrete ordinates neutron transport equation. Numerical testing of these methods and comparison of their results to those obtained by conventional methods have established the high accuracy of nodal methods. Furthermore, it has been suggested that the linear-linear approximation is the most computationally efficient, practical nodal approximation. Indeed, this claim has been substantiated by comparing the accuracy in the solution, and the CPU time required to achieve convergence to that solution by several nodal approximations, as well as the diamond difference scheme. Two types of linear-linear nodal methods have been developed in the literature: analytic linear-linear (NLL) methods, in which the transverse-leakage terms are derived analytically, and approximate linear-linear (PLL) methods, in which these terms are approximated. In spite of their higher accuracy, NLL methods result in very complicated discrete-variable equations that exhibit a high degree of coupling, thus requiring special solution algorithms. On the other hand, the sacrificed accuracy in PLL methods is compensated for by the simple discrete-variable equations and diamond-difference-like solution algorithm. In this paper the authors outline the development of an NLL nodal method, the bilinear method, which can be written in a weighted diamond difference form with one spatial weight per dimension that is analytically derived rather than preassigned in an ad hoc fashion

  14. Least-squares calibration method based on a universal phase and height mapping formula in Fourier transform profilometry

    International Nuclear Information System (INIS)

    Wen, Yongfu; Cheng, Haobo; Gao, Ya; Zhang, Huijing; Feng, Yunpeng; Pan, Baozhu

    2011-01-01

    In Fourier transform profilometry (FTP), we perform a strict theoretical analysis of the phase–height mapping relationship and give a universal calculation formula in which the constraints on the experimental setup are removed. In that case, the projector and camera can be located arbitrarily to get better information on fringes, which makes the system easy to manipulate and improves the speed of measurement. As the relationship between the phase and height distribution depends on system parameters (such as the relative position of the projector and camera) which are difficult to obtain, we propose a least-squares calibration approach for FTP, which can avoid measuring the system parameters directly. Both the simulation and experimental results prove that the 3D shape of the tested objects can be reconstructed exactly by using the calculation formula and calibration method, and that the system has better universality

  15. Growth curves of crossbred cows sired by Hereford, Angus, Belgian Blue, Brahman, Boran, and Tuli bulls, and the fraction of mature body weight and height at puberty.

    Science.gov (United States)

    Freetly, H C; Kuehn, L A; Cundiff, L V

    2011-08-01

    The objective of this study was to evaluate the growth curves of females to determine if mature size and relative rates of maturation among breeds differed. Body weight and hip height data were fitted to the nonlinear function BW = f(age) = A - Be(k×age), where A is an estimate of mature BW and k determines the rate that BW or height moves from B to A. Cows represented progeny from 28 Hereford, 38 Angus, 25 Belgian Blue, 34 Brahman, 8 Boran, and 9 Tuli sires. Bulls from these breeds were mated by AI to Angus, Hereford, and MARC III composite (1/4 Angus, 1/4 Hereford, 1/4 Red Poll, and 1/4 Pinzgauer) cows to produce calves in 1992, 1993, and 1994. These matings resulted in 516 mature cows whose growth curves were subsequently evaluated. Hereford-sired cows tended to have heavier mature BW, as estimated by parameter A, than Angus- (P=0.09) and Brahman-sired cows (P=0.06), and were heavier than the other breeds (P Angus-sired cows were heavier than Boran- (P Angus-sired cows did not differ from Brahman-sired cows (P=0.94). Brahman-sired cows had a heavier mature BW than Boran- (P Angus-sired cows matured faster (k) than cows sired by Hereford (P=0.03), Brahman (P Angus-sired cows (P=0.09), and had reached a greater proportion of their mature BW at puberty than had Hereford- (P < 0.001), Tuli- (P < 0.001), and Belgian Blue-sired cows (P < 0.001). Within species of cattle, the relative range in proportion of mature BW at puberty (Bos taurus 0.56 through 0.58, and Bos indicus 0.60) was highly conserved, suggesting that proportion of mature BW is a more robust predictor of age at puberty across breeds than is absolute weight or age. © 2011 American Society of Animal Science. All rights reserved.

  16. The association between height and birth order: evidence from 652 518 Swedish men

    OpenAIRE

    Myrskyla, Mikko; Silventoinen, Karri; Jelenkovic, Aline; Tynelius, Per; Rasmussen, Finn

    2013-01-01

    Background Birth order is associated with outcomes such as birth weight and adult socioeconomic position (SEP), but little is known about the association with adult height. This potential birth order-height association is important because height predicts health, and because the association may help explain population-level height trends. We studied the birth order-height association and whether it varies by family characteristics or birth cohort. Methods We used the Swedish Military Conscrip...

  17. Development of realistic high-resolution whole-body voxel models of Japanese adult males and females of average height and weight, and application of models to radio-frequency electromagnetic-field dosimetry

    International Nuclear Information System (INIS)

    Nagaoka, Tomoaki; Watanabe, Soichi; Sakurai, Kiyoko; Kunieda, Etsuo; Watanabe, Satoshi; Taki, Masao; Yamanaka, Yukio

    2004-01-01

    With advances in computer performance, the use of high-resolution voxel models of the entire human body has become more frequent in numerical dosimetries of electromagnetic waves. Using magnetic resonance imaging, we have developed realistic high-resolution whole-body voxel models for Japanese adult males and females of average height and weight. The developed models consist of cubic voxels of 2 mm on each side; the models are segmented into 51 anatomic regions. The adult female model is the first of its kind in the world and both are the first Asian voxel models (representing average Japanese) that enable numerical evaluation of electromagnetic dosimetry at high frequencies of up to 3 GHz. In this paper, we will also describe the basic SAR characteristics of the developed models for the VHF/UHF bands, calculated using the finite-difference time-domain method

  18. Sensitivity Analysis of Dune Height Measurements Along Cross-shore Profiles Using a Novel Method for Dune Ridge Extraction

    Science.gov (United States)

    Hardin, E.; Mitasova, H.; Overton, M.

    2010-12-01

    meets landward-facing slope. In this study, a novel approach for dune ridge extraction is proposed. First, two alongshore end-points of the studied dune ridge are identified using a standard, profile-based method. Then, the dune ridge is traced as the least cost path connecting the two end-points on a cost surface that represents the cumulative penalty for tracing a low elevation path. The cost surface is derived from elevation (i.e., elevation is equal to the cologarithm of the cost). The extracted dune ridge is then sampled at the DEM resolution of 0.5m and analysis of dune ridge height is performed. Statistics on variation in dune height are computed to help understand the sensitivity of dune height measurements to profile spacing and placement. Preliminary results suggest that dune height becomes nearly uncorrelated within 50m and ranges on average nearly a half meter within a five meter window suggesting that dune height measurements are sensitive to profile placement.

  19. Intercomparison of methods for the estimation of displacement height and roughness length from single-level eddy covariance data

    Science.gov (United States)

    Graf, Alexander; van de Boer, Anneke; Schüttemeyer, Dirk; Moene, Arnold; Vereecken, Harry

    2013-04-01

    The displacement height d and roughness length z0 are parameters of the logarithmic wind profile and as such these are characteristics of the surface, that are required in a multitude of meteorological modeling applications. Classically, both parameters are estimated from multi-level measurements of wind speed over a terrain sufficiently homogeneous to avoid footprint-induced differences between the levels. As a rule-of thumb, d of a dense, uniform crop or forest canopy is 2/3 to 3/4 of the canopy height h, and z0 about 10% of canopy height in absence of any d. However, the uncertainty of this rule-of-thumb becomes larger if the surface of interest is not "dense and uniform", in which case a site-specific determination is required again. By means of the eddy covariance method, alternative possibilities to determine z0 and d have become available. Various authors report robust results if either several levels of sonic anemometer measurements, or one such level combined with a classic wind profile is used to introduce direct knowledge on the friction velocity into the estimation procedure. At the same time, however, the eddy covariance method to measure various fluxes has superseded the profile method, leaving many current stations without a wind speed profile with enough levels sufficiently far above the canopy to enable the classic estimation of z0 and d. From single-level eddy covariance measurements at one point in time, only one parameter can be estimated, usually z0 while d is assumed to be known. Even so, results tend to scatter considerably. However, it has been pointed out, that the use of multiple points in time providing different stability conditions can enable the estimation of both parameters, if they are assumed constant over the time period regarded. These methods either rely on flux-variance similarity (Weaver 1990 and others following), or on the integrated universal function for momentum (Martano 2000 and others following). In both cases

  20. Accuracy of recumbent height measurement.

    Science.gov (United States)

    Gray, D S; Crider, J B; Kelley, C; Dickinson, L C

    1985-01-01

    Since many patients requiring specialized nutritional support are bedridden, measurement of height for purposes of nutritional assessment or prescription must often be done with the patient in bed. This study examined the accuracy of measuring body height in bed in the supine position. Two measurements were performed on 108 ambulatory inpatients: (1) standing height using a standard height-weight scale, and (2) bed height using a flexible tape. Patients were divided into four groups based on which of two researchers performed each of the two measurements. Each patient was also weighed and self-reported height, weight, sex, and age were recorded. Bed height was significantly longer than standing height by 3.68 cm, but the two measurements were equally precise. It was believed, however, that this 2% difference was probably not clinically significant in most circumstances. Bed height correlated highly with standing height (r = 0.95), and the regression equation was standing height = 13.82 +/- 0.09 bed height. Patients overestimated their heights. Heights recorded by nurses were more accurate when patients were measured than when asked about their heights, but the patients were more often asked than measured.

  1. Quantification of emissions from knapsack sprayers: 'the weight method

    Science.gov (United States)

    Garcia-Santos, Glenda; Binder, Claudia R.

    2010-05-01

    Misuse of pesticides kill or seriously sicken thousands of people every year and poison the natural environment. Investigations of occupational and environmental risk have received considerable interest over the last decades. And yet, lack of staff and analytical equipments as well the costs of chemical analyses make difficult, if not impossible, the control of the pesticide contamination and residues in humans, air, water, and soils in developing countries. To assess emissions of pesticides (transport and deposition) during spray application and the risk for the human health and the environment, tracers can be useful tools. Uranine was used to quantify drift airborne and later deposition on the neighbouring field and clothes of the applicator after spraying with a knapsack sprayer in one of the biggest areas of potato production in Colombia. Keeping the same setup the amount of wet drift was measured by difference in the weight of high absorbent papers used to collect the tracer. Surprisingly this weight method (Weight-HAP) was able to explain 71% of the drift variance measured with the tracer. Therefore the weight method is presented as a suitable rapid low cost screening tool, complementary to toxicological tests, to assess air pollution, occupational and environmental exposure generated by the emissions from knapsack sprayers during pesticide application. This technique might be important in places were there is lack of analytical instruments.

  2. Dynamic airspace configuration method based on a weighted graph model

    Directory of Open Access Journals (Sweden)

    Chen Yangzhou

    2014-08-01

    Full Text Available This paper proposes a new method for dynamic airspace configuration based on a weighted graph model. The method begins with the construction of an undirected graph for the given airspace, where the vertices represent those key points such as airports, waypoints, and the edges represent those air routes. Those vertices are used as the sites of Voronoi diagram, which divides the airspace into units called as cells. Then, aircraft counts of both each cell and of each air-route are computed. Thus, by assigning both the vertices and the edges with those aircraft counts, a weighted graph model comes into being. Accordingly the airspace configuration problem is described as a weighted graph partitioning problem. Then, the problem is solved by a graph partitioning algorithm, which is a mixture of general weighted graph cuts algorithm, an optimal dynamic load balancing algorithm and a heuristic algorithm. After the cuts algorithm partitions the model into sub-graphs, the load balancing algorithm together with the heuristic algorithm transfers aircraft counts to balance workload among sub-graphs. Lastly, airspace configuration is completed by determining the sector boundaries. The simulation result shows that the designed sectors satisfy not only workload balancing condition, but also the constraints such as convexity, connectivity, as well as minimum distance constraint.

  3. A cloud shadow detection method combined with cloud height iteration and spectral analysis for Landsat 8 OLI data

    Science.gov (United States)

    Sun, Lin; Liu, Xinyan; Yang, Yikun; Chen, TingTing; Wang, Quan; Zhou, Xueying

    2018-04-01

    Although enhanced over prior Landsat instruments, Landsat 8 OLI can obtain very high cloud detection precisions, but for the detection of cloud shadows, it still faces great challenges. Geometry-based cloud shadow detection methods are considered the most effective and are being improved constantly. The Function of Mask (Fmask) cloud shadow detection method is one of the most representative geometry-based methods that has been used for cloud shadow detection with Landsat 8 OLI. However, the Fmask method estimates cloud height employing fixed temperature rates, which are highly uncertain, and errors of large area cloud shadow detection can be caused by errors in estimations of cloud height. This article improves the geometry-based cloud shadow detection method for Landsat OLI from the following two aspects. (1) Cloud height no longer depends on the brightness temperature of the thermal infrared band but uses a possible dynamic range from 200 m to 12,000 m. In this case, cloud shadow is not a specific location but a possible range. Further analysis was carried out in the possible range based on the spectrum to determine cloud shadow location. This effectively avoids the cloud shadow leakage caused by the error in the height determination of a cloud. (2) Object-based and pixel spectral analyses are combined to detect cloud shadows, which can realize cloud shadow detection from two aspects of target scale and pixel scale. Based on the analysis of the spectral differences between the cloud shadow and typical ground objects, the best cloud shadow detection bands of Landsat 8 OLI were determined. The combined use of spectrum and shape can effectively improve the detection precision of cloud shadows produced by thin clouds. Several cloud shadow detection experiments were carried out, and the results were verified by the results of artificial recognition. The results of these experiments indicated that this method can identify cloud shadows in different regions with correct

  4. Comparison of midupper arm circumference and weight-for-height z score for assessing acute malnutrition in Bangladeshi children aged 6-60 mo: an analytical study.

    Science.gov (United States)

    Hossain, Md Iqbal; Ahmed, Tahmeed; Arifeen, Shams El; Billah, Sk Masum; Faruque, Asg; Islam, M Munirul; Jackson, Alan A

    2017-11-01

    Background : In clinical settings, wasting in childhood has primarily been assessed with the use of a weight-for-height z score (WHZ), and in community settings, it has been assessed via the midupper arm circumference (MUAC) with a cutoff children were not identified when these cutoffs for MUAC were used. Objective: We determined the cutoffs for MUAC to detect wasting in Bangladeshi children aged 6-60 mo. Design: A secondary analysis was carried out on data from 27,767 children aged 6-59 mo. This analysis comprised 1 ) 9131 children across Bangladesh and 2 ) 18,636 children enrolled in a surveillance study in the Dhaka Hospital of icddr,b during 1996-2014. The area under the receiver operating curve was used to indicate the most appropriate choice for cutoffs that related MUAC with WHZ. Results: The mean ± SD age for the entire group was 21 ± 14 mo, WHZ was -1.18 ± 1.23, height-for-age z score was -1.63 ± 1.39, MUAC was 136 ± 14 mm, and 45% of subjects were girls. MUAC correlated with the WHZ ( r : 0.618, P < 0.001). Age-stratified analyses revealed that, for ages 6-24 mo, MUAC cutoffs were <120 mm for a WHZ <-3 and <125 mm for a WHZ <-2 with a sensitivity of 72.9% and 63.2%, respectively, and a specificity of 84.7% and 85.3%, respectively; for ages 25-36 mo, MUAC cutoffs were <125 mm for a WHZ <-3 and <135 mm for a WHZ <-2 with a sensitivity of 55.0% and 71.7%, respectively, and a specificity of 92.8% and 78.7% respectively; and for ages 37-60 mo, MUAC cutoffs were <135 mm for a WHZ <-3 and <140 mm for a WHZ <-2 with a sensitivity of 71.4% and 70.4%, respectively, and a specificity of 84.6% and 80.3%, respectively. Conclusion: The respective cutoffs for MUAC to better capture the vulnerability and risk of severe (WHZ <-3) and moderate (WHZ <-2) wasting would be <120 and <125 mm for ages 6-24 mo, <125 and <135 mm for ages 25-36 mo, and <135 and <140 mm for ages 37-60 mo. © 2017 American Society for Nutrition.

  5. Accelerated weight histogram method for exploring free energy landscapes

    Energy Technology Data Exchange (ETDEWEB)

    Lindahl, V.; Lidmar, J.; Hess, B. [Department of Theoretical Physics and Swedish e-Science Research Center, KTH Royal Institute of Technology, 10691 Stockholm (Sweden)

    2014-07-28

    Calculating free energies is an important and notoriously difficult task for molecular simulations. The rapid increase in computational power has made it possible to probe increasingly complex systems, yet extracting accurate free energies from these simulations remains a major challenge. Fully exploring the free energy landscape of, say, a biological macromolecule typically requires sampling large conformational changes and slow transitions. Often, the only feasible way to study such a system is to simulate it using an enhanced sampling method. The accelerated weight histogram (AWH) method is a new, efficient extended ensemble sampling technique which adaptively biases the simulation to promote exploration of the free energy landscape. The AWH method uses a probability weight histogram which allows for efficient free energy updates and results in an easy discretization procedure. A major advantage of the method is its general formulation, making it a powerful platform for developing further extensions and analyzing its relation to already existing methods. Here, we demonstrate its efficiency and general applicability by calculating the potential of mean force along a reaction coordinate for both a single dimension and multiple dimensions. We make use of a non-uniform, free energy dependent target distribution in reaction coordinate space so that computational efforts are not wasted on physically irrelevant regions. We present numerical results for molecular dynamics simulations of lithium acetate in solution and chignolin, a 10-residue long peptide that folds into a β-hairpin. We further present practical guidelines for setting up and running an AWH simulation.

  6. New Internet search volume-based weighting method for integrating various environmental impacts

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

    2016-01-15

    Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. The resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.

  7. New Internet search volume-based weighting method for integrating various environmental impacts

    International Nuclear Information System (INIS)

    Ji, Changyoon; Hong, Taehoon

    2016-01-01

    Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. The resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.

  8. A fixed full-matrix method for determining ice sheet height change from satellite altimeter: an ENVISAT case study in East Antarctica with backscatter analysis

    Science.gov (United States)

    Yang, Yuande; Hwang, Cheinway; E, Dongchen

    2014-09-01

    A new method, called the fixed full-matrix method (FFM), is used to compute height changes at crossovers of satellite altimeter ground tracks. Using the ENVISAT data in East Antarctica, FFM results in crossovers of altimeter heights that are 1.9 and 79 times more than those from the fixed half method (FHM) and the one-row method (ORM). The mean standard error of height changes is about 14 cm from ORM, which is reduced to 7 cm by FHM and to 3 cm by FFM. Unlike FHM, FFM leads to uniform errors in the first-half and second-half height-change time series. FFM has the advantage in improving the accuracy of the change of height and backscattered power over ORM and FHM. Assisted by the ICESat-derived height changes, we determine the optimal threshold correlation coefficient (TCC) for a best correction for the backscatter effect on ENVISAT height changes. The TCC value of 0.92 yields an optimal result for FFM. With this value, FFM yields ENVISAT-derived height change rates in East Antarctica mostly falling between and 3 cm/year, and matching the ICESat result to 0.94 cm/year. The ENVISAT result will provide a constraint on the current mass balance result along the Chinese expedition route CHINARE.

  9. Minimum weight protection - Gradient method; Protection de poids minimum - Methode du gradient

    Energy Technology Data Exchange (ETDEWEB)

    Danon, R.

    1958-12-15

    After having recalled that, when considering a mobile installation, total weight has a crucial importance, and that, in the case of a nuclear reactor, a non neglectable part of weight is that of protection, this note presents an iterative method which results, for a given protection, to a configuration with a minimum weight. After a description of the problem, the author presents the theoretical formulation of the gradient method as it is applied to the concerned case. This application is then discussed, as well as its validity in terms of convergence and uniqueness. Its actual application is then reported, and possibilities of practical applications are evoked.

  10. An integration weighting method to evaluate extremum coordinates

    International Nuclear Information System (INIS)

    Ilyushchenko, V.I.

    1990-01-01

    The numerical version of the Laplace asymptotics has been used to evaluate the coordinates of extrema of multivariate continuous and discontinuous test functions. The performed computer experiments demonstrate the high efficiency of the integration method proposed. The saturating dependence of extremum coordinates on such parameters as a number of integration subregions and that of K going /theoretically/ to infinity has been studied in detail for the limitand being a ratio of two Laplace integrals with exponentiated K. The given method is an integral equivalent of that of weighted means. As opposed to the standard optimization methods of the zero, first and second order the proposed method can be successfully applied to optimize discontinuous objective functions, too. There are possibilities of applying the integration method in the cases, when the conventional techniques fail due to poor analytical properties of the objective functions near extremal points. The proposed method is efficient in searching for both local and global extrema of multimodal objective functions. 12 refs.; 4 tabs

  11. Drop weight impact measurements of HE sensitivity: modified detection methods

    International Nuclear Information System (INIS)

    Preston, D N; Brown, G W; Tappan, B C; Oshwald, D M; Koby, J R; Schoonover, M L

    2014-01-01

    High explosives small-scale sensitivity testing has been a hallmark of safety screening since WWII. Sensitivity testing was once crude and simple; broom sticks were used to scrape explosives on the floor while experimenters would look, listen, and smell for signs of a reaction. Since then, a wide variety of testing apparatus have been developed to explore the effects of different stimuli on explosives. In concert with the development of the machines themselves, the reaction detection methods have also evolved. This paper's focus is on the Los Alamos National Laboratory's (LANL) drop weight impact machine and reaction detection methods. A critical evaluation of results is presented with cautionary examples of false positives that can occur with non-explosive materials.

  12. Wuthering Heights

    NARCIS (Netherlands)

    Bronte, Emily

    2005-01-01

    Wuthering Heights tells the story of a romance between two youngsters: Catherine Earnshaw and an orphan boy, Heathcliff. After she rejects him for a boy from a better background he develops a lust for revenge that takes over his life. In attempting to win her back and destroy those he blames for his

  13. Bone age estimation and prediction of final height in patients with β-thalassaemia major: a comparison between the two most common methods

    International Nuclear Information System (INIS)

    Christoforidis, Athanasios; Katzos, George; Athanassiou-Metaxa, Miranda; Badouraki, Maria

    2007-01-01

    Thalassaemic patients are in need of frequent assessment of bone age because of growth failure and pubertal disorders. To compare the ''rapid'' Greulich and Pyle (G and P) method with the third edition of the Tanner and Whitehouse (TW3) method for determining skeletal maturity and predicting final height in thalassaemic patients. A total of 191 radiographs from 58 patients (28 male, 30 female) were retrospectively evaluated by two investigators, one for each method. In 47 radiographs from 15 patients having attained their adult height, predicted final height was calculated according to each method. The mean bone ages determined by both the G and P and TW3 methods were lower than mean chronological age, although the differences were not statistically significant (10.04 ± 3.69 years and 9.98 ± 3.39 years vs. 10.78 ± 3.96 years, respectively). Both methods had a tendency to over-estimate final height. Overall, the TW3 method seemed to be more accurate than the G and P method (mean absolute error 3.21 ± 2.51 years vs. 3.99 ± 2.99 years, respectively, P=0.048). The same method should be used when serial assessments are performed, as both methods provide similarly reliable, although not equivalent, results. The TW3 height prediction method seemed to be more accurate in patients with β-thalassaemia major than the G and P method, albeit with a large confidence interval. (orig.)

  14. Bone age estimation and prediction of final height in patients with {beta}-thalassaemia major: a comparison between the two most common methods

    Energy Technology Data Exchange (ETDEWEB)

    Christoforidis, Athanasios; Katzos, George; Athanassiou-Metaxa, Miranda [Aristotle University of Thessaloniki, 1st Paediatric Department, Thessaloniki (Greece); Badouraki, Maria [Ippokratio Hospital, Paediatric Radiology Department, Thessaloniki (Greece)

    2007-12-15

    Thalassaemic patients are in need of frequent assessment of bone age because of growth failure and pubertal disorders. To compare the ''rapid'' Greulich and Pyle (G and P) method with the third edition of the Tanner and Whitehouse (TW3) method for determining skeletal maturity and predicting final height in thalassaemic patients. A total of 191 radiographs from 58 patients (28 male, 30 female) were retrospectively evaluated by two investigators, one for each method. In 47 radiographs from 15 patients having attained their adult height, predicted final height was calculated according to each method. The mean bone ages determined by both the G and P and TW3 methods were lower than mean chronological age, although the differences were not statistically significant (10.04 {+-} 3.69 years and 9.98 {+-} 3.39 years vs. 10.78 {+-} 3.96 years, respectively). Both methods had a tendency to over-estimate final height. Overall, the TW3 method seemed to be more accurate than the G and P method (mean absolute error 3.21 {+-} 2.51 years vs. 3.99 {+-} 2.99 years, respectively, P=0.048). The same method should be used when serial assessments are performed, as both methods provide similarly reliable, although not equivalent, results. The TW3 height prediction method seemed to be more accurate in patients with {beta}-thalassaemia major than the G and P method, albeit with a large confidence interval. (orig.)

  15. Validity and reliability of self-reported weight and height measures for the diagnoses of adolescent's nutritional status Validade e confiabilidade das medidas referidas de peso e estatura para o diagnóstico do estado nutricional de adolescents

    Directory of Open Access Journals (Sweden)

    Carla Cristina Enes

    2009-12-01

    Full Text Available PURPOSE: To assess the validity and reliability of self-reported height, weight, and Body Mass Index (BMI to diagnose the nutritional status of adolescents. METHODS: The study included 360 public school students of both genders, with ages ranging from 10 to 15 years. Adolescents self-reported their weight and height, and these values were later obtained directly by interviewers. The validity of BMI based on self-reported measures was calculated using sensitivity and specificity indexes, and positive predictive value (PPV. Agreement between self-reported and measured BMI was evaluated using Kappa's weight coefficient, the Lin correlation coefficient, and Bland-Altman and Lin's plots. RESULTS: Both girls and boys underestimated their weight (-1.0 girls and boys and height (girls - 1.2 and boys - 0.8 (p OBJETIVO: Avaliar a validade do peso, estatura e Índice de Massa Corporal (IMC referidos e sua confiabilidade para o diagnóstico do estado nutricional de adolescentes de Piracicaba. MÉTODOS: Participaram do estudo 360 adolescentes de ambos os sexos, de escolas públicas de Piracicaba, com idade entre 10 e 15 anos. Os adolescentes auto-relataram seu peso e estatura, sendo esses valores obtidos por medidas diretas, logo em seguida, pelos entrevistadores. A validade do IMC referido foi calculada segundo índices de sensibilidade, especificidade e valor preditivo positivo (VPP. Avaliou-se a concordância entre as categorias de IMC obtido por meio das medidas referidas e aferidas a partir do coeficiente kappa ponderado, coeficiente de correlação de Lin. e gráficos de Bland e Altman e Lin. RESULTADOS: Verificou-se que tanto os meninos quanto as meninas subestimaram o peso (-1,0 meninas e meninos e a estatura (meninas -1,2 e meninos -0,8 (p < 0,001. Os valores de IMC aferidos e referidos apresentaram uma concordância moderada. A sensibilidade do IMC referido para classificar os indivíduos obesos foi maior para os meninos (87,5%, enquanto a

  16. Canopy BRF simulation of forest with different crown shape and height in larger scale based on Radiosity method

    Science.gov (United States)

    Song, Jinling; Qu, Yonghua; Wang, Jindi; Wan, Huawei; Liu, Xiaoqing

    2007-06-01

    Radiosity method is based on the computer simulation of 3D real structures of vegetations, such as leaves, branches and stems, which are composed by many facets. Using this method we can simulate the canopy reflectance and its bidirectional distribution of the vegetation canopy in visible and NIR regions. But with vegetations are more complex, more facets to compose them, so large memory and lots of time to calculate view factors are required, which are the choke points of using Radiosity method to calculate canopy BRF of lager scale vegetation scenes. We derived a new method to solve the problem, and the main idea is to abstract vegetation crown shapes and to simplify their structures, which can lessen the number of facets. The facets are given optical properties according to the reflectance, transmission and absorption of the real structure canopy. Based on the above work, we can simulate the canopy BRF of the mix scenes with different species vegetation in the large scale. In this study, taking broadleaf trees as an example, based on their structure characteristics, we abstracted their crowns as ellipsoid shells, and simulated the canopy BRF in visible and NIR regions of the large scale scene with different crown shape and different height ellipsoids. Form this study, we can conclude: LAI, LAD the probability gap, the sunlit and shaded surfaces are more important parameter to simulate the simplified vegetation canopy BRF. And the Radiosity method can apply us canopy BRF data in any conditions for our research.

  17. Integral transform method for solving neutron transport problems with general anisotropic scattering in a cylinder of finite height

    International Nuclear Information System (INIS)

    Kumar, V.; Sahni, D.C.

    1983-01-01

    In this paper, the authors present the mathematical techniques that were developed for solving the integral transport equation for the criticality of a homogeneous cylinder of finite height with general anisotropic scattering. They present the integral transport equations for the Fourier transformed spherical harmonic moments of the angular flux. These moments are also represented by a series of products of spherical Bessel functions. The criticality problem is, then, posed by the matrix eigenvalue problem whose eigenvector is composed of the expansion coefficients mentioned above. An methodology of calculating the general matrix element is discussed by using the recursion relations derived in this paper. Finally, for the one-group criticality of finite cylinders, the benchmark results are generated when scattering is linearly anisotropic. Also, these benchmarks are solved and compared with the S/sub N/ method of TWOTRAN

  18. Simple method for direct crown base height estimation of individual conifer trees using airborne LiDAR data.

    Science.gov (United States)

    Luo, Laiping; Zhai, Qiuping; Su, Yanjun; Ma, Qin; Kelly, Maggi; Guo, Qinghua

    2018-05-14

    Crown base height (CBH) is an essential tree biophysical parameter for many applications in forest management, forest fuel treatment, wildfire modeling, ecosystem modeling and global climate change studies. Accurate and automatic estimation of CBH for individual trees is still a challenging task. Airborne light detection and ranging (LiDAR) provides reliable and promising data for estimating CBH. Various methods have been developed to calculate CBH indirectly using regression-based means from airborne LiDAR data and field measurements. However, little attention has been paid to directly calculate CBH at the individual tree scale in mixed-species forests without field measurements. In this study, we propose a new method for directly estimating individual-tree CBH from airborne LiDAR data. Our method involves two main strategies: 1) removing noise and understory vegetation for each tree; and 2) estimating CBH by generating percentile ranking profile for each tree and using a spline curve to identify its inflection points. These two strategies lend our method the advantages of no requirement of field measurements and being efficient and effective in mixed-species forests. The proposed method was applied to a mixed conifer forest in the Sierra Nevada, California and was validated by field measurements. The results showed that our method can directly estimate CBH at individual tree level with a root-mean-squared error of 1.62 m, a coefficient of determination of 0.88 and a relative bias of 3.36%. Furthermore, we systematically analyzed the accuracies among different height groups and tree species by comparing with field measurements. Our results implied that taller trees had relatively higher uncertainties than shorter trees. Our findings also show that the accuracy for CBH estimation was the highest for black oak trees, with an RMSE of 0.52 m. The conifer species results were also good with uniformly high R 2 ranging from 0.82 to 0.93. In general, our method has

  19. Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1995-01-01

    1.1 This test method covers the determination of the energy required to initiate failure in monolithic polycarbonate sheet material under specified conditions of impact using a free falling weight. 1.2 Two specimen types are defined as follows: 1.2.1 Type A consists of a flat plate test specimen and employs a clamped ring support. 1.2.2 Type B consists of a simply supported three-point loaded beam specimen (Fig. 1) and is recommended for use with material which can not be failed using the Type A specimen. For a maximum drop height of 6.096 m (20 ft) and a maximum drop weight of 22.68 kg (50 lb), virgin polycarbonate greater than 12.70 mm (1/2 in.) thick will probably require use of the Type B specimen. Note 1 - See also ASTM Methods: D 1709, D 2444 and D 3029. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of reg...

  20. Revised Indian Academy of Pediatrics 2015 growth charts for height, weight and body mass index for 5-18-year-old Indian children

    Directory of Open Access Journals (Sweden)

    Vaman V Khadilkar

    2015-01-01

    Full Text Available Growth chart committee of Indian Academy of Pediatrics (IAP has revised growth charts for 5-18-year-old Indian children in Jan 2015. The last IAP growth charts (2007 were based on data collected in 1989-92 which is now >2 decades old. India is in an economic and nutrition transition and hence growth pattern of Indian children has changed over last few years. Thus, it was necessary to produce contemporary, updated growth references for Indian children. The new IAP charts were prepared by collating data from nine groups who had published studies in indexed journals on growth from India in the last decade. Growth charts were constructed from a total of 87022 middle and upper socioeconomic class children (m 54086, f 32936 from all five zones of India. Data from middle and upper socioeconomic class children are likely to have higher prevalence of overweight and obesity and hence growth charts produced on such populations are likely to "normalize" obesity. To remove such unhealthy weights form the data, method suggested by World Health Organization was used to produce weight charts. Thus, the new IAP weight charts are much lower than the recently published studies on affluent Indian children. Since Indian′s are at a higher risk of obesity-related cardiometabolic complications at lower body mass index (BMI, BMI charts adjusted for 23, and 27 adult equivalent cut-offs as per International obesity task force guidelines were constructed. IAP now recommends use of these new charts to replace the 2007 IAP charts.

  1. Weight loss methods and changes in eating habits among successful weight losers.

    Science.gov (United States)

    Soini, Sirpa; Mustajoki, Pertti; Eriksson, Johan G

    2016-01-01

    Changes in several lifestyle related factors are required for successful long-term weight loss. Identification of these factors is of major importance from a public health point of view. This study was based upon findings from the Finnish Weight Control Registry (FWCR), a web-based registry. In total, 316 people were recruited and 184 met the study inclusion criteria. The aims of this study were to assess means and typical changes in eating habits associated with successful long-term weight loss. Half of the participants (48%) reported that they lost weight slowly primarily with dietary changes. Self-weighing frequency was high, 92% was weighing themselves at least once a week during the weight loss phase, and 75% during the maintenance phase. Dietary aspects associated with successful weight loss and weight maintenance included an increase in intake of vegetables, a reduction in frequency of eating candies and fast food, regular meal frequency and application of the Plate model. Both slow and fast weight loss may lead to successful long-term results and weight maintenance. A decrease in energy intake was achieved by reducing intake of energy-dense food, applying the Plate model and by regular meal frequency. Key messages Successful long-term weight loss is associated with a reduction in intake of energy-dense food. A more regular meal frequency and a high frequency of self-weighing seem to be helpful.

  2. Promoting weight loss methods in parenting magazines: Implications for women.

    Science.gov (United States)

    Basch, Corey H; Roberts, Katherine J; Samayoa-Kozlowsky, Sandra; Glaser, Debra B

    2016-01-01

    Weight gain before and after pregnancy is important for women's health. The purpose of this study was to assess articles and advertisements related to weight loss in three widely read parenting magazines, "Parenting School Years," "Parenting Early Years," and "Parenting," which have an estimated combined readership of approximately 24 million (mainly women readers). Almost a quarter (23.7%, n = 32) of the 135 magazine issues over a four year period included at least one feature article on weight loss. A variety of topics were covered in the featured articles, with the most frequent topics being on losing weight to please yourself (25.2%), healthy ways to lose weight (21.1%), and how to keep the weight off (14.7%). Less than half (45.9%) of the articles displayed author credentials, such as their degree, qualifications, or expertise. A fifth (20.0%, n = 27) of the magazines included at least one prominent advertisement for weight loss products. Almost half (46.9%) of the weight loss advertisements were for weight loss programs followed by weight loss food products (25.0%), weight loss aids (21.9%), and only 6.2% of the advertisements for weight loss were on fitness. Parenting magazines should advocate for healthy weight loss, including lifestyle changes for sustained health.

  3. Ethnic variation in validity of classification of overweight and obesity using self-reported weight and height in American women and men: the Third National Health and Nutrition Examination Survey

    Directory of Open Access Journals (Sweden)

    Sempos Christopher T

    2005-10-01

    Full Text Available Abstract Background Few data have been published on the validity of classification of overweight and obesity based on self-reported weight in representative samples of Hispanic as compared to other American populations despite the wide use of such data. Objective To test the null hypothesis that ethnicity is unrelated to bias of mean body mass index (BMI and to sensitivity of overweight or obesity (BMI >= 25 kg/m2 derived from self-reported (SR versus measured weight and height using measured BMI as the gold standard. Design Cross-sectional survey of a large national sample, the Third National Health and Nutrition Examination Survey (NHANES III conducted in 1988–1994. Participants American men and women aged 20 years and over (n = 15,025. Measurements SR height, weight, cigarette smoking, health status, and socio-demographic variables from home interview and measured weight and height. Results In women and Mexican American (MA men SR BMI underestimated true prevalence rates of overweight or obesity. For other men, no consistent difference was seen. Sensitivity of SR was similar in non-Hispanic European Americans (EA and non-Hispanic African Americans (AA but much lower in MA. Prevalence of obesity (BMI >= 30 kg/m2 is consistently underestimated by self-report, the gap being greater for MA than for other women, but similar for MA and other men. The mean difference between self-reported and measured BMI was greater in MA (men -0.37, women -0.76 kg/m2 than in non-Hispanic EA (men -0.22, women -0.62 kg/m2. In a regression model with the difference between self-reported and measured BMI as the dependent variable, MA ethnicity was a significant (p Conclusion Under-estimation of the prevalence of overweight or obesity based on height and weight self-reported at interview varied significantly among ethnic groups independent of other variables.

  4. Method of preparing light-weight plugging mud

    Energy Technology Data Exchange (ETDEWEB)

    Gorskiy, V F; Melnichuk, A N; Vernikovskiy, A N

    1982-01-01

    A method is proposed for preparing a light-weight plugging mud which includes mixing Portland cement on an aqueous suspension of palygorskite. It is distinguished by the fact that in order to improve the quality of the mud and strength of the cement stone with simultaneous decrease in the gas permeability, before mixing the Portland cement, the aqueous suspension of palygorskite is dispersed to stabilization of viscosity, and after mixing the Portland cement, the obtained cement-clay mixture is exposed to additional dispersion under pressure. The ratio of the ingredients is the following (% by mass): Portland cement 32.0-61.0; palygorskite 1.2-2.9; water--the rest.

  5. Childhood height, adult height, and the risk of prostate cancer

    DEFF Research Database (Denmark)

    Bjerregaard, Lise Geisler; Aarestrup, Julie; Gamborg, Michael

    2016-01-01

    PURPOSE: We previously showed that childhood height is positively associated with prostate cancer risk. It is, however, unknown whether childhood height exerts its effects independently of or through adult height. We investigated whether and to what extent childhood height has a direct effect...... on the risk of prostate cancer apart from adult height. METHODS: We included 5,871 men with height measured at ages 7 and 13 years in the Copenhagen School Health Records Register who also had adult (50-65 years) height measured in the Danish Diet, Cancer and Health study. Prostate cancer status was obtained...... through linkage to the Danish Cancer Registry. Direct and total effects of childhood height on prostate cancer risk were estimated from Cox regressions. RESULTS: From 1996 to 2012, 429 prostate cancers occurred. Child and adult heights were positively and significantly associated with prostate cancer risk...

  6. Medical weight loss versus bariatric surgery: does method affect body composition and weight maintenance after 15% reduction in body weight?

    Science.gov (United States)

    Kulovitz, Michelle G; Kolkmeyer, Deborah; Conn, Carole A; Cohen, Deborah A; Ferraro, Robert T

    2014-01-01

    The aim of this study was to investigate body composition changes in fat mass (FM) to lean body mass (LBM) ratios following 15% body weight loss (WL) in both integrated medical treatment and bariatric surgery groups. Obese patients (body mass index [BMI] 46.6 ± 6.5 kg/m(2)) who underwent laparoscopic gastric bypass surgery (BS), were matched with 24 patients undergoing integrated medical and behavioral treatment (MT). The BS and MT groups were evaluated for body weight, BMI, body composition, and waist circumference (WC) at baseline and after 15% WL. Following 15% body WL, there were significant decreases in %FM and increased %LBM (P maintenance of WL at 1 y were found. For both groups, baseline FM was found to be negatively correlated with percentage of weight regained (%WR) at 1 y post-WL (r = -0.457; P = 0.007). Baseline WC and rate of WL to 15% were significant predictors of %WR only in the BS group (r = 0.713; P = 0.020). If followed closely by professionals during the first 15% body WL, patients losing 15% weight by either medical or surgical treatments can attain similar FM:LBM loss ratios and can maintain WL for 1 y. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Exactitud del autorreporte de peso y talla en mujeres de 15 a 19 años del Estado de México Exactitude of self-reported weight and height in 15 to 19 year old female adolescents of the State of Mexico

    Directory of Open Access Journals (Sweden)

    Claudia Unikel-Santoncini

    2009-06-01

    Full Text Available OBJETIVO:Conocer la exactitud del autorreporte del peso y la talla en mujeres adolescentes de 15 a 19 años en función de la edad, el nivel de marginación, la intensidad de migración de las localidades y la escolaridad del padre. MATERIAL Y MÉTODOS:Se obtuvo una muestra representativa de mujeres estudiantes en escuelas públicas de nivel medio superior en el Estado de México (N=2 357 a quienes se les solicitó el dato por autorreporte del peso y la estatura y luego se las midió y pesó. Los datos se recopilaron durante los meses de enero a abril de 2007. RESULTADOS:Las adolescentes sobrestimaron su estatura de manera no significativa y subestimaron en grado significativo su peso, con tendencias similares al analizar por edad, nivel de marginación, intensidad de migración y escolaridad del padre. CONCLUSIONES:Los resultados muestran la validez del autorreporte de la estatura, mas no del peso corporal en esta muestra.OBJECTIVE:To know the accuracy of weight and height in 15 to 19 years old women in relation to age, marginalization and migratory intensity level of localities and father's academic level. MATERIALS AND METHODS: The study was carried out with a probabilistic sample of public high school students at the State of Mexico (N=2 357, to whom self-reported weight and height were asked and were directly measured afterwards. Data were collected from January to April 2007. RESULTS:The results obtained showed that these adolescents overestimate their height not significantly, and significantly underestimate their weight, with similar trends analyzing age, marginalization levels, migratory intensity and father's education status. CONCLUSIONS:Results show the validity of self-reported height but not of self-reported weight among this sample.

  8. A method of retrieving cloud top height and cloud geometrical thickness with oxygen A and B bands for the Deep Space Climate Observatory (DSCOVR) mission: Radiative transfer simulations

    International Nuclear Information System (INIS)

    Yang, Yuekui; Marshak, Alexander; Mao, Jianping; Lyapustin, Alexei; Herman, Jay

    2013-01-01

    The Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR) was designed to measure the atmosphere and surface properties over the whole sunlit half of the Earth from the L1 Lagrangian point. It has 10 spectral channels ranging from the UV to the near-IR, including two pairs of oxygen (O 2 ) A-band (779.5 and 764 nm) and B-band (680 and 687.75 nm) reference and absorption channels selected for the cloud height measurements. This paper presents the radiative transfer analysis pertinent to retrieving cloud top height and cloud geometrical thickness with EPIC A- and B-band observations. Due to photon cloud penetration, retrievals from either O 2 A- or B-band channels alone gives the corresponding cloud centroid height, which is lower than the cloud top. However, we show both the sum and the difference between the retrieved cloud centroid heights in the A and B bands are functions of cloud top height and cloud geometrical thickness. Based on this fact, the paper develops a new method to retrieve cloud top height and cloud geometrical thickness simultaneously for fully cloudy scenes over ocean surface. First, cloud centroid heights are calculated for both A and B bands using the ratios between the reflectances of the absorbing and reference channels; then the cloud top height and the cloud geometrical thickness are retrieved from the two dimensional look up tables that relate the sum and the difference between the retrieved centroid heights for A and B bands to the cloud top height and the cloud geometrical thickness. This method is applicable for clouds thicker than an optical depth of 5. -- Highlights: ► EPIC onboard DSCOVR is equipped with O 2 A and B band channels. ► Photon cloud penetration depths of A and B bands contain information of cloud thickness. ► A method is developed to retrieve cloud top height and cloud geometrical thickness with EPIC O 2 A- and B-band

  9. An Annotated Bibliography of Isotonic Weight-Training Methods.

    Science.gov (United States)

    Wysong, John V.

    This literature study was conducted to compare and evaluate various types and techniques of weight lifting so that a weight lifting program could be selected or devised for a secondary school. Annotations of 32 research reports, journal articles, and monographs on isotonic strength training are presented. The literature in the first part of the…

  10. Weighted mean: A possible method to express overall Dhatu Sarata

    Directory of Open Access Journals (Sweden)

    Chandar Prakash Gunawat

    2015-01-01

    Full Text Available Several questions are being raised regarding the accuracy of the methods of diagnosis and reporting of various clinical parameters according to Ayurveda in recent times. Uniformity in reporting, issues related to inter-rater variability, uniformity in applying statistical tests, reliability, consistency, and validation of various tools, - are some of the major concerns that are being voiced. Dhatu Sarata is one such domain where no substantial work has been carried out to address these issues. The Sanskrit term "Dhatu" roughly translates as a "tissue.". Sarata stands for the status of Dhatu in a given individual, i.e., it describes whether the status is excellent, moderate, or poor. In the available research literature, there are several gaps while dealing with and reporting the clinical assessment of Dhatu. Most of the workers group an individual into any one of the categories of Dhatu Sarata, and this approach neglects the contribution of other Dhatus to the overall Sarata in that individual. In this communication, we propose the usefulness of "weighted mean" in expressing the overall Sarata in an individual. This gives the researcher a freedom of not classifying an individual into any one group of Sarata, while also simultaneously allowing him/her to retain the focus on the status of an individual Dhatu.

  11. Weighted mean: A possible method to express overall Dhatu Sarata.

    Science.gov (United States)

    Gunawat, Chandar Prakash; Singh, Girish; Patwardhan, Kishor; Gehlot, Sangeeta

    2015-01-01

    Several questions are being raised regarding the accuracy of the methods of diagnosis and reporting of various clinical parameters according to Ayurveda in recent times. Uniformity in reporting, issues related to inter-rater variability, uniformity in applying statistical tests, reliability, consistency, and validation of various tools, - are some of the major concerns that are being voiced. Dhatu Sarata is one such domain where no substantial work has been carried out to address these issues. The Sanskrit term "Dhatu" roughly translates as a "tissue." Sarata stands for the status of Dhatu in a given individual, i.e., it describes whether the status is excellent, moderate, or poor. In the available research literature, there are several gaps while dealing with and reporting the clinical assessment of Dhatu. Most of the workers group an individual into any one of the categories of Dhatu Sarata, and this approach neglects the contribution of other Dhatus to the overall Sarata in that individual. In this communication, we propose the usefulness of "weighted mean" in expressing the overall Sarata in an individual. This gives the researcher a freedom of not classifying an individual into any one group of Sarata, while also simultaneously allowing him/her to retain the focus on the status of an individual Dhatu.

  12. Diagnostic reliability of the cervical vertebral maturation method and standing height in the identification of the mandibular growth spurt.

    Science.gov (United States)

    Perinetti, Giuseppe; Contardo, Luca; Castaldo, Attilio; McNamara, James A; Franchi, Lorenzo

    2016-07-01

    To evaluate the capability of both cervical vertebral maturation (CVM) stages 3 and 4 (CS3-4 interval) and the peak in standing height to identify the mandibular growth spurt throughout diagnostic reliability analysis. A previous longitudinal data set derived from 24 untreated growing subjects (15 females and nine males,) detailed elsewhere were reanalyzed. Mandibular growth was defined as annual increments in Condylion (Co)-Gnathion (Gn) (total mandibular length) and Co-Gonion Intersection (Goi) (ramus height) and their arithmetic mean (mean mandibular growth [mMG]). Subsequently, individual annual increments in standing height, Co-Gn, Co-Goi, and mMG were arranged according to annual age intervals, with the first and last intervals defined as 7-8 years and 15-16 years, respectively. An analysis was performed to establish the diagnostic reliability of the CS3-4 interval or the peak in standing height in the identification of the maximum individual increments of each Co-Gn, Co-Goi, and mMG measurement at each annual age interval. CS3-4 and standing height peak show similar but variable accuracy across annual age intervals, registering values between 0.61 (standing height peak, Co-Gn) and 0.95 (standing height peak and CS3-4, mMG). Generally, satisfactory diagnostic reliability was seen when the mandibular growth spurt was identified on the basis of the Co-Goi and mMG increments. Both CVM interval CS3-4 and peak in standing height may be used in routine clinical practice to enhance efficiency of treatments requiring identification of the mandibular growth spurt.

  13. Evaluation of an inverse distance weighting method for patching ...

    African Journals Online (AJOL)

    2016-07-03

    Jul 3, 2016 ... 1Agricultural Research Council – Institute for Soil, Climate and Water, .... local influence that diminishes with distance and weights change ..... most excessively high rainfall events are obtained from convective clouds which.

  14. Single-electron multiplication statistics as a combination of Poissonian pulse height distributions using constraint regression methods

    International Nuclear Information System (INIS)

    Ballini, J.-P.; Cazes, P.; Turpin, P.-Y.

    1976-01-01

    Analysing the histogram of anode pulse amplitudes allows a discussion of the hypothesis that has been proposed to account for the statistical processes of secondary multiplication in a photomultiplier. In an earlier work, good agreement was obtained between experimental and reconstructed spectra, assuming a first dynode distribution including two Poisson distributions of distinct mean values. This first approximation led to a search for a method which could give the weights of several Poisson distributions of distinct mean values. Three methods have been briefly exposed: classical linear regression, constraint regression (d'Esopo's method), and regression on variables subject to error. The use of these methods gives an approach of the frequency function which represents the dispersion of the punctual mean gain around the whole first dynode mean gain value. Comparison between this function and the one employed in Polya distribution allows the statement that the latter is inadequate to describe the statistical process of secondary multiplication. Numerous spectra obtained with two kinds of photomultiplier working under different physical conditions have been analysed. Then two points are discussed: - Does the frequency function represent the dynode structure and the interdynode collection process. - Is the model (the multiplication process of all dynodes but the first one, is Poissonian) valid whatever the photomultiplier and the utilization conditions. (Auth.)

  15. Fuzzy comprehensive evaluation method of F statistics weighting in ...

    African Journals Online (AJOL)

    In order to rapidly identify the source of water inrush in coal mine, and provide the theoretical basis for mine water damage prevention and control, fuzzy comprehensive evaluation model was established. The F statistics of water samples was normalized as the weight of fuzzy comprehensive evaluation for determining the ...

  16. GTX Reference Vehicle Structural Verification Methods and Weight Summary

    Science.gov (United States)

    Hunter, J. E.; McCurdy, D. R.; Dunn, P. W.

    2002-01-01

    The design of a single-stage-to-orbit air breathing propulsion system requires the simultaneous development of a reference launch vehicle in order to achieve the optimal mission performance. Accordingly, for the GTX study a 300-lb payload reference vehicle was preliminarily sized to a gross liftoff weight (GLOW) of 238,000 lb. A finite element model of the integrated vehicle/propulsion system was subjected to the trajectory environment and subsequently optimized for structural efficiency. This study involved the development of aerodynamic loads mapped to finite element models of the integrated system in order to assess vehicle margins of safety. Commercially available analysis codes were used in the process along with some internally developed spreadsheets and FORTRAN codes specific to the GTX geometry for mapping of thermal and pressure loads. A mass fraction of 0.20 for the integrated system dry weight has been the driver for a vehicle design consisting of state-of-the-art composite materials in order to meet the rigid weight requirements. This paper summarizes the methodology used for preliminary analyses and presents the current status of the weight optimization for the structural components of the integrated system.

  17. Beliefs about causes of weight gain, effective weight gain prevention strategies, and barriers to weight management in the Australian population

    OpenAIRE

    Dryer, Rachel; Ware, Nicole

    2014-01-01

    Purpose: To identify beliefs held by the general public regarding causes of weight gain, weight prevention strategies, and barriers to weight management; and to examine whether such beliefs predict the actual body mass of participants. Methods: A questionnaire-based survey was administered to participants recruited from regional and metropolitan areas of Australia. This questionnaire obtained demographic information, height, weight; as well as beliefs about causes of weight gain, weight preve...

  18. Body Mass Index Self-Perception and Weight Management Behaviors during Late Adolescence

    Science.gov (United States)

    Yang, Kyeongra; Turk, Melanie T.; Allison, Virginia L.; James, Khara A.; Chasens, Eileen

    2014-01-01

    Background: This study examined the relationship between actual body weight and self-perceived weight, and how perception of one's weight affects weight management behaviors among US adolescents. Methods: Adolescents ages 16-19 years with objectively-measured weight and height and self-reported perception of weight, weight-loss efforts, and…

  19. Comprehensive Evaluation of the Sustainable Development of Power Grid Enterprises Based on the Model of Fuzzy Group Ideal Point Method and Combination Weighting Method with Improved Group Order Relation Method and Entropy Weight Method

    Directory of Open Access Journals (Sweden)

    Shuyu Dai

    2017-10-01

    Full Text Available As an important implementing body of the national energy strategy, grid enterprises bear the important responsibility of optimizing the allocation of energy resources and serving the economic and social development, and their levels of sustainable development have a direct impact on the national economy and social life. In this paper, the model of fuzzy group ideal point method and combination weighting method with improved group order relation method and entropy weight method is proposed to evaluate the sustainable development of power grid enterprises. Firstly, on the basis of consulting a large amount of literature, the important criteria of the comprehensive evaluation of the sustainable development of power grid enterprises are preliminarily selected. The opinions of the industry experts are consulted and fed back for many rounds through the Delphi method and the evaluation criteria system for sustainable development of power grid enterprises is determined, then doing the consistent and non dimensional processing of the evaluation criteria. After that, based on the basic order relation method, the weights of each expert judgment matrix are synthesized to construct the compound matter elements. By using matter element analysis, the subjective weights of the criteria are obtained. And entropy weight method is used to determine the objective weights of the preprocessed criteria. Then, combining the subjective and objective information with the combination weighting method based on the subjective and objective weighted attribute value consistency, a more comprehensive, reasonable and accurate combination weight is calculated. Finally, based on the traditional TOPSIS method, the triangular fuzzy numbers are introduced to better realize the scientific processing of the data information which is difficult to quantify, and the queuing indication value of each object and the ranking result are obtained. A numerical example is taken to prove that the

  20. Standardization of methods of expressing lengths and weights of fish

    Science.gov (United States)

    Hile, Ralph

    1948-01-01

    Fishery workers in the United States and Canada are unable to think readily in terms of the metric system of weights and measurements. Even long experience does not make it possible to form a clear idea as to the actual size of fish for which lengths and weights are given in metric units, without first converting to the English system. A more general adoption of the English system of weights and measurements in fishery work is recommended. The use of English units exclusively is suggested for articles of a popular or semi-popular nature, but in more formal publications the key information, at least, should be recorded in both systems. In highly technical papers metric units alone may prove satisfactory. Agreement is also lacking as to which length measurement of fish is suited best for uniform adoption. The total length is recommended here for the reason that it is the only measurement that includes all of the fish. This length is defined as the distance from the tip of the head (jaws closed) to the tip of the tail with the lobes compressed so as to give the maximum possible measurement.

  1. Reliability and validity of Web-SPAN, a web-based method for assessing weight status, diet and physical activity in youth.

    Science.gov (United States)

    Storey, K E; McCargar, L J

    2012-02-01

    Web-based surveys are becoming increasing popular. The present study aimed to assess the reliability and validity of the Web-Survey of Physical Activity and Nutrition (Web-SPAN) for self-report of height and weight, diet and physical activity by youth. School children aged 11-15years (grades 7-9; n=459) participated in the school-based research (boys, n=225; girls, n=233; mean age, 12.8years). Students completed Web-SPAN (self-administered) twice and participated in on-site school assessments [height, weight, 3-day food/pedometer record, Physical Activity Questionnaire for Older Children (PAQ-C), shuttle run]. Intraclass (ICC) and Pearson's correlation coefficients and paired samples t-tests were used to assess the test-retest reliability of Web-SPAN and to compare Web-SPAN with the on-site assessments. Test-retest reliability for height (ICC=0.90), weight (ICC=0.98) and the PAQ-C (ICC=0.79) were highly correlated, whereas correlations for nutrients were not as strong (ICC=0.37-0.64). There were no differences between Web-SPAN times 1 and 2 for height and weight, although there were differences for the PAQ-C and most nutrients. Web-SPAN was strongly correlated with the on-site assessments, including height (ICC=0.88), weight (ICC=0.93) and the PAQ-C (ICC=0.70). Mean differences for height and the PAQ-C were not significant, whereas mean differences for weight were significant resulting in an underestimation of being overweight/obesity prevalence (84% agreement). Correlations for nutrients were in the range 0.24-0.40; mean differences were small but generally significantly different. Correlations were weak between the web-based PAQ-C and 3-day pedometer record (r=0.28) and 20-m shuttle run (r=0.28). Web-SPAN is a time- and cost-effective method that can be used to assess the diet and physical activity status of youth in large cross-sectional studies and to assess group trends (weight status). © 2011 The Authors. Journal of Human Nutrition and Dietetics © 2011 The

  2. Atomization in graphite-furnace atomic absorption spectrometry. Peak-height method vs. integration method of measuring absorbance: carbon rod atomizer 63

    International Nuclear Information System (INIS)

    Sturgeon, R.E.; Chakrabarti, C.L.; Maines, I.S.; Bertels, P.C.

    1975-01-01

    Oscilloscopic traces of transient atomic absorption signals generated during continuous heating of a Carbon Rod Atomizer model 63 show features which are characteristic of the element being atomized. This research was undertaken to determine the significance and usefulness of the two analytically significant parameters, absorbance maximum and integrated absorbance. For measuring integrated absorbance, an electronic integrating control unit consisting of a timing circuit, a lock-in amplifier, and a digital voltmeter, which functions as a direct absorbance x second readout, has been designed, developed, and successfully tested. Oscilloscopic and recorder traces of the absorbance maximum and digital display of the integrated absorbance are simultaneously obtained. For the elements studied, Cd, Zn, Cu, Al, Sn, Mo, and V, the detection limits and the precision obtained are practically identical for both methods of measurements. The sensitivities by the integration method are about the same as, or less than, those obtained by the peak-height method, whereas the calibration curves by the former are generally linear over wider ranges of concentrations. (U.S.)

  3. Effects of preservation method on length and weight of pond raised ...

    African Journals Online (AJOL)

    Length and weight measurements of fish used for taxonomy and determination of length-weight relationship are taken from preserved specimen. This study sets out to investigate the effects of two preservatives, 70% alcohol and 10% formalin and freezing method on the length and weight of preserved specimens of tilapia ...

  4. IS THERE REALLY A NEED TO CREATE «REGIONAL PERCENTILE CURVES» OF WEIGHT-HEIGHT PARAMETERS? (COMMENT TO THE ARTICLE BY RITA R. KILDIYAROVA «ASSESSING PHYSICAL DEVELOPMENT OF CHILDREN WITH PERCENTILE DIAGRAMS»

    Directory of Open Access Journals (Sweden)

    Svetlana G. Makarova

    2017-01-01

    Full Text Available Height, body weight and body mass index are important parameters of health and are widely used in clinical practice, for assessing health of children, and for population studies. Amid the general globalization, the main trend of the present time is joining efforts of various countries for prevention and treatment of diseases in children. The work of the World Health Organization (WHO on creation of international standards of anthropometric measures and parameters of children's development is based upon this trend. A key point of the WHO standards is their creation based on a survey of a large cohort of children (from 5 countries of 6 continents who were in optimal conditions: who were breast-fed and received the up-to-date level of care and quality of the provided medical care. This actually allowed to eliminate the main exogenous factors that affect such parameters and to make them, in fact, the reference ones. The application of a unified approach using the WHO standards allows to carry out multicenter studies involving different countries as well as to compare the data obtained in different regions. Studies have shown that the WHO standards for physical development are applicable in different regions of the world. In this regard, the creation of «regional» reference curves for height and body weight of children that are different from the generally accepted standards is currently inappropriate, but it is really relevant to use the WHO standards. 

  5. Influência da altura e ganho de peso maternos e de idade gestacional sobre o peso do recém-nascido: estudo de 3 grupos de gestantes normais The influence of maternal height and weight gain and gestational age on the newborn's weight

    Directory of Open Access Journals (Sweden)

    Arnaldo Augusto Franco de Siqueira

    1975-09-01

    Full Text Available Foi estudada em 1.354 gestantes normais, a influência da altura e ganho de peso maternos e da idade gestacional sobre o peso do recém-nascido. Verificou-se que as gestantes que deixaram de ganhar peso em controles mensais e as que tinham 1,49 m ou menos de altura apresentaram maior risco de terem recém-nascido de baixo peso. O maior aumento de peso fetal ocorre entre a 36ª e 40ª semanas de gravidez. Foi construída uma curva ponderal para gestantes normais, que possibilita a identificação de gestantes desnutridas ou obesas. Foi testada a curva de crescimento intrauterino de Tanner e Thomson, verificando-se sua aplicabilidade em nosso meio.The influence of maternal height and maternal weight gain and gestational age on the newborn's weight was studied in 1.354 pregnant women. The pregnant women who stopped gaining weight in monthly follow-ups and those whose height was 1.49 m or under presented a greater probability of having low weight babies at birth. The largest foetal weight gain was between the 36th and 40th week of pregnancy. A normal weight curve that permits the identification of undernourished and overweight preganant women was built The Tanner and Thomsen intrauterine growth diagramme and its applicability among our population was pointed out.

  6. Improved boundary layer height measurement using a fuzzy logic method: Diurnal and seasonal variabilities of the convective boundary layer over a tropical station

    Science.gov (United States)

    Allabakash, S.; Yasodha, P.; Bianco, L.; Venkatramana Reddy, S.; Srinivasulu, P.; Lim, S.

    2017-09-01

    This paper presents the efficacy of a "tuned" fuzzy logic method at determining the height of the boundary layer using the measurements from a 1280 MHz lower atmospheric radar wind profiler located in Gadanki (13.5°N, 79°E, 375 mean sea level), India, and discusses the diurnal and seasonal variations of the measured convective boundary layer over this tropical station. The original fuzzy logic (FL) method estimates the height of the atmospheric boundary layer combining the information from the range-corrected signal-to-noise ratio, the Doppler spectral width of the vertical velocity, and the vertical velocity itself, measured by the radar, through a series of thresholds and rules, which did not prove to be optimal for our radar system and geographical location. For this reason the algorithm was tuned to perform better on our data set. Atmospheric boundary layer heights obtained by this tuned FL method, the original FL method, and by a "standard method" (that only uses the information from the range-corrected signal-to-noise ratio) are compared with those obtained from potential temperature profiles measured by collocated Global Positioning System Radio Sonde during years 2011 and 2013. The comparison shows that the tuned FL method is more accurate than the other methods. Maximum convective boundary layer heights are observed between 14:00 and 15:00 local time (LT = UTC + 5:30) for clear-sky days. These daily maxima are found to be lower during winter and postmonsoon seasons and higher during premonsoon and monsoon seasons, due to net surface radiation and convective processes over this region being more intense during premonsoon and monsoon seasons and less intense in winter and postmonsoon seasons.

  7. Diagnostic test of predicted height model in Indonesian elderly: a study in an urban area

    Directory of Open Access Journals (Sweden)

    Fatmah Fatmah

    2010-08-01

    Full Text Available Aim In an anthropometric assessment, elderly are frequently unable to measure their height due to mobility and skeletal deformities. An alternative is to use a surrogate value of stature from arm span, knee height, and sitting height. The equations developed for predicting height in Indonesian elderly using these three predictors. The equations put in the nutritional assessment card (NSA of older people. Before the card which is the first new technology in Indonesia will be applied in the community, it should be tested. The study aimed was to conduct diagnostic test of predicted height model in the card compared to actual height.Methods Model validation towards 400 healthy elderly conducted in Jakarta City with cross-sectional design. The study was the second validation test of the model besides Depok City representing semi urban area which was undertaken as the first study.Result Male elderly had higher mean age, height, weight, arm span, knee height, and sitting height as compared to female elderly. The highest correlation between knee height and standing height was similar in women (r = 0.80; P < 0.001 and men (r = 0.78; P < 0.001, and followed by arm span and sitting height. Knee height had the lowest difference with standing height in men (3.13 cm and women (2.79 cm. Knee height had the biggest sensitivity (92.2%, and the highest specificity on sitting height (91.2%.Conclusion Stature prediction equation based on knee-height, arm span, and sitting height are applicable for nutritional status assessment in Indonesian elderly. (Med J Indones 2010;19:199-204Key words: diagnostic test, elderly, predicted height model

  8. Light Weight MP3 Watermarking Method for Mobile Terminals

    Science.gov (United States)

    Takagi, Koichi; Sakazawa, Shigeyuki; Takishima, Yasuhiro

    This paper proposes a novel MP3 watermarking method which is applicable to a mobile terminal with limited computational resources. Considering that in most cases the embedded information is copyright information or metadata, which should be extracted before playing back audio contents, the watermark detection process should be executed at high speed. However, when conventional methods are used with a mobile terminal, it takes a considerable amount of time to detect a digital watermark. This paper focuses on scalefactor manipulation to enable high speed watermark embedding/detection for MP3 audio and also proposes the manipulation method which minimizes audio quality degradation adaptively. Evaluation tests showed that the proposed method is capable of embedding 3 bits/frame information without degrading audio quality and detecting it at very high speed. Finally, this paper describes application examples for authentication with a digital signature.

  9. NON LINEAR GROWTH CURVES FOR WEIGHT AND HEIGHT IN FOUR GENETIC GROUPS OF HORSES CURVAS DE CRESCIMENTO NÃO-LINEARES PARA PESO E ALTURA EM QUATRO GRUPOS GENÉTICOS DE CAVALOS

    Directory of Open Access Journals (Sweden)

    Concepta Margaret McManus

    2010-04-01

    Full Text Available

    Hanoverian, Brazilian Showjumper, English Thoroughbred and Crossbred horses reared by the Brazilian Army were weighed and measured from six months of age to adult. In total 4,860 measurements on 1,445 horses were available. General curves were estimated as a function of time by the Gompertz, Brody, Logistic, Weibull and Richards curves, using PROC NLIN procedures of SAS ®. The Richards Curve did not converge for weight or height of any of the genetic groups or sexes. The logistic curve did not converge for any of the weight traits while the Gompertz also did not converge for height in several groups. R2 varied between 0.55 for weight in females of the crossbred group to 0.92 for males of the same group. For the height traits the highest R2 (0.66 was found for female Hanovarian horses and lowest for males of the same breed (0.12. In general the curves estimated similar values for asymptotic height and weight, except for Logistic curve, which also showed lowest R2 and highest error. Results for the Weibull and Brody curves were similar in all cases so where possible the Brody curve was selected as the best curve as it had less parameters. The Gompertz curve tended to underestimate mature weights and height. Estimates for both weight and height were in general higher in males than for females. In most cases the b parameter was shown to account for < 0.0001% of the variation in the curve shape. The k parameters, which indicate maturity, were of similar magnitude for the Brody, Gompertz and Weibull curves, for both height and weight within breed. This parameter indicated that there is little difference in maturation rates between males and females.

    KEY WORDS: Brody, Gompertz, Logistic, Richards, Weibull.

    Cavalos das raças Hanoveriana (HA, Brasileiro de Hipismo (BH, Puro Sangue Inglês (PSI e mestiços (PSIxBH criados pelo Exército brasileiro foram pesados e medidos de seis meses de idade até adulto. Realizaram-se 4.860 medidas em

  10. A method for weighted projections to the positive definite cone

    KAUST Repository

    Valkonen, Tuomo

    2014-01-01

    © 2014 Taylor & Francis. We study the numerical solution of the problem (Formula presented.) , where (Formula presented.) is a symmetric square matrix, and (Formula presented.) is a linear operator, such that (Formula presented.) is invertible. With (Formula presented.) the desired fractional duality gap, and (Formula presented.) the condition number of (Formula presented.) , we prove (Formula presented.) iteration complexity for a simple primal-dual interior point method directly based on those for linear programs with semi-definite constraints. We do not, however, require the numerically expensive scalings inherent in these methods to force fast convergence. For low-dimensional problems (Formula presented.), our numerical experiments indicate excellent performance and only a very slowly growing dependence of the convergence rate on (Formula presented.). While our algorithm requires somewhat more iterations than existing interior point methods, the iterations are cheaper. This gives better computational times.

  11. A method for weighted projections to the positive definite cone

    KAUST Repository

    Valkonen, Tuomo

    2014-06-24

    © 2014 Taylor & Francis. We study the numerical solution of the problem (Formula presented.) , where (Formula presented.) is a symmetric square matrix, and (Formula presented.) is a linear operator, such that (Formula presented.) is invertible. With (Formula presented.) the desired fractional duality gap, and (Formula presented.) the condition number of (Formula presented.) , we prove (Formula presented.) iteration complexity for a simple primal-dual interior point method directly based on those for linear programs with semi-definite constraints. We do not, however, require the numerically expensive scalings inherent in these methods to force fast convergence. For low-dimensional problems (Formula presented.), our numerical experiments indicate excellent performance and only a very slowly growing dependence of the convergence rate on (Formula presented.). While our algorithm requires somewhat more iterations than existing interior point methods, the iterations are cheaper. This gives better computational times.

  12. Assessment of Groundwater Chemical Quality, Using Inverse Distance Weighted Method

    Directory of Open Access Journals (Sweden)

    Sh. Ashraf

    2013-04-01

    Full Text Available An interpolation technique, ordinary Inverse Distance Weighted (IDW, was used to obtain the spatial distribution of groundwater quality parameters in Damghan plain of Iran. According to Scofield guidelines for TDS value, 60% of the water samples were harmful for irrigation purposes. Regarding to EC parameter, more than 60% of studied area was laid in bad range for irrigation purposes. The most dominant anion was Cl- and 10% of water samples showed a very hazardous class. According to Doneen guidelines for chloride value, 100% of collected water from the aquifer had slight to moderate problems for irrigation water purposes. The predominant cations in Damghan plain aquifer were according to Na+> Ca++> Mg++> K+. Sodium ion was the dominant cation and regarding to Na+ content guidelines, almost all groundwater samples had problem for foliar application. Calcium ion distribution was within usual range. The magnesium ion concentration is generally lower than sodium and calcium. The majority of the samples showed Mg++amount within usual range. Also K+ value ranged from 0.1 to 0.23 meq/L and all the water samples had potassium values within the permissible limit. Based on SAR criterion 80 % of collected water had slight to moderate problems. The SSP values were found from 2.87 to 6.87%. According to SAR value, thirty percent of ground water samples were doubtful class. The estimated amounts of RSC were ranged from 0.4-2 and based on RSC criterion, twenty percent of groundwater samples had slight to moderate problems.

  13. Interpolation from Grid Lines: Linear, Transfinite and Weighted Method

    DEFF Research Database (Denmark)

    Lindberg, Anne-Sofie Wessel; Jørgensen, Thomas Martini; Dahl, Vedrana Andersen

    2017-01-01

    When two sets of line scans are acquired orthogonal to each other, intensity values are known along the lines of a grid. To view these values as an image, intensities need to be interpolated at regularly spaced pixel positions. In this paper we evaluate three methods for interpolation from grid l...

  14. Using container weights to determine irrigation needs: A simple method

    Science.gov (United States)

    R. Kasten Dumroese; Mark E. Montville; Jeremiah R. Pinto

    2015-01-01

    Proper irrigation can reduce water use, water waste, and incidence of disease. Knowing when to irrigate plants in container nurseries can be determined by weighing containers. This simple method is quantifiable, which is a benefit when more than one worker is responsible for irrigation. Irrigation is necessary when the container weighs some target as a proportion of...

  15. Preconditioned Iterative Methods for Solving Weighted Linear Least Squares Problems

    Czech Academy of Sciences Publication Activity Database

    Bru, R.; Marín, J.; Mas, J.; Tůma, Miroslav

    2014-01-01

    Roč. 36, č. 4 (2014), A2002-A2022 ISSN 1064-8275 Institutional support: RVO:67985807 Keywords : preconditioned iterative methods * incomplete decompositions * approximate inverses * linear least squares Subject RIV: BA - General Mathematics Impact factor: 1.854, year: 2014

  16. Assessment of Groundwater Chemical Quality, Using Inverse Distance Weighted Method

    Directory of Open Access Journals (Sweden)

    Sh. Ashraf

    2014-02-01

    Full Text Available An interpolation technique, ordinary Inverse Distance Weighted (IDW, was used to obtain the spatial distribution of groundwater quality parameters in Damghan plain of Iran. According to Scofield guidelines for TDS   value, 60% of the water samples were harmful for irrigation purposes. Regarding to EC parameter, more than 60% of studied area was laid in bad range for irrigation purposes. The most dominant anion was Cl- and 10% of water samples showed a very hazardous class. According to  Doneen  guidelines for  chloride value, 100%  of  collected  water  from the  aquifer  had  slight to moderate problems  for  irrigation water purposes. The predominant cations in Damghan plain aquifer were according to Na+> Ca++> Mg++> K+. Sodium ion was the dominant cation and regarding to Na+ content guidelines, almost all groundwater samples had problem for foliar application. Calcium ion distribution was within usual range. The magnesium ion concentration is generally lower than sodium and calcium. The majority of the samples showed   Mg++amount within usual range. Also K+ value ranged from 0.1 to 0.23 meq/L and all the water samples had potassium values within the permissible limit. Based on SAR criterion 80 % of collected water had slight to moderate problems. The SSP values were found from 2.87 to 6.87%. According to SAR value, thirty percent of ground water samples were doubtful class. The estimated amounts of RSC were ranged from 0.4-2 and based on RSC criterion, twenty percent of groundwater samples had slight to moderate problems Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font

  17. Evaluation of cleaner production options in dyeing and printing industry: Using combination weighting method

    Science.gov (United States)

    Kang, Hong; Zhang, Yun; Hou, Haochen; Sun, Xiaoyang; Qin, Chenglu

    2018-03-01

    The textile industry has a high environmental impact so that implementing cleaner production audit is an effective way to achieve energy conservation and emissions reduction. But the evaluation method in current cleaner production audit divided the evaluation of CPOs into two parts: environment and economy. The evaluation index system was constructed from three criteria of environment benefits, economy benefits and product performance; weights of five indicators were determined by combination weights of entropy method and factor weight sorting method. Then efficiencies were evaluated comprehensively. The results showed that the best alkali recovery option was the nanofiltration membrane method (S=0.80).

  18. Modeling the solute transport by particle-tracing method with variable weights

    Science.gov (United States)

    Jiang, J.

    2016-12-01

    Particle-tracing method is usually used to simulate the solute transport in fracture media. In this method, the concentration at one point is proportional to number of particles visiting this point. However, this method is rather inefficient at the points with small concentration. Few particles visit these points, which leads to violent oscillation or gives zero value of concentration. In this paper, we proposed a particle-tracing method with variable weights. The concentration at one point is proportional to the sum of the weights of the particles visiting it. It adjusts the weight factors during simulations according to the estimated probabilities of corresponding walks. If the weight W of a tracking particle is larger than the relative concentration C at the corresponding site, the tracking particle will be splitted into Int(W/C) copies and each copy will be simulated independently with the weight W/Int(W/C) . If the weight W of a tracking particle is less than the relative concentration C at the corresponding site, the tracking particle will be continually tracked with a probability W/C and the weight will be adjusted to be C. By adjusting weights, the number of visiting particles distributes evenly in the whole range. Through this variable weights scheme, we can eliminate the violent oscillation and increase the accuracy of orders of magnitudes.

  19. Optimization of PID Parameters Utilizing Variable Weight Grey-Taguchi Method and Particle Swarm Optimization

    Science.gov (United States)

    Azmi, Nur Iffah Mohamed; Arifin Mat Piah, Kamal; Yusoff, Wan Azhar Wan; Romlay, Fadhlur Rahman Mohd

    2018-03-01

    Controller that uses PID parameters requires a good tuning method in order to improve the control system performance. Tuning PID control method is divided into two namely the classical methods and the methods of artificial intelligence. Particle swarm optimization algorithm (PSO) is one of the artificial intelligence methods. Previously, researchers had integrated PSO algorithms in the PID parameter tuning process. This research aims to improve the PSO-PID tuning algorithms by integrating the tuning process with the Variable Weight Grey- Taguchi Design of Experiment (DOE) method. This is done by conducting the DOE on the two PSO optimizing parameters: the particle velocity limit and the weight distribution factor. Computer simulations and physical experiments were conducted by using the proposed PSO- PID with the Variable Weight Grey-Taguchi DOE and the classical Ziegler-Nichols methods. They are implemented on the hydraulic positioning system. Simulation results show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE has reduced the rise time by 48.13% and settling time by 48.57% compared to the Ziegler-Nichols method. Furthermore, the physical experiment results also show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE tuning method responds better than Ziegler-Nichols tuning. In conclusion, this research has improved the PSO-PID parameter by applying the PSO-PID algorithm together with the Variable Weight Grey-Taguchi DOE method as a tuning method in the hydraulic positioning system.

  20. Character expansion methods for matrix models of dually weighted graphs

    International Nuclear Information System (INIS)

    Kazakov, V.A.; Staudacher, M.; Wynter, T.

    1996-01-01

    We consider generalized one-matrix models in which external fields allow control over the coordination numbers on both the original and dual lattices. We rederive in a simple fashion a character expansion formula for these models originally due to Itzykson and Di Francesco, and then demonstrate how to take the large N limit of this expansion. The relationship to the usual matrix model resolvent is elucidated. Our methods give as a by-product an extremely simple derivation of the Migdal integral equation describing the large N limit of the Itzykson-Zuber formula. We illustrate and check our methods by analysing a number of models solvable by traditional means. We then proceed to solve a new model: a sum over planar graphs possessing even coordination numbers on both the original and the dual lattice. We conclude by formulating equations for the case of arbitrary sets of even, self-dual coupling constants. This opens the way for studying the deep problem of phase transitions from random to flat lattices. (orig.). With 4 figs

  1. Effects of Boundary Layer Height on the Model of Ground-Level PM2.5 Concentrations from AOD: Comparison of Stable and Convective Boundary Layer Heights from Different Methods

    Directory of Open Access Journals (Sweden)

    Zengliang Zang

    2017-06-01

    Full Text Available The aerosol optical depth (AOD from satellites or ground-based sun photometer spectral observations has been widely used to estimate ground-level PM2.5 concentrations by regression methods. The boundary layer height (BLH is a popular factor in the regression model of AOD and PM2.5, but its effect is often uncertain. This may result from the structures between the stable and convective BLHs and from the calculation methods of the BLH. In this study, the boundary layer is divided into two types of stable and convective boundary layer, and the BLH is calculated using different methods from radiosonde data and National Centers for Environmental Prediction (NCEP reanalysis data for the station in Beijing, China during 2014–2015. The BLH values from these methods show significant differences for both the stable and convective boundary layer. Then, these BLHs were introduced into the regression model of AOD-PM2.5 to seek the respective optimal BLH for the two types of boundary layer. It was found that the optimal BLH for the stable boundary layer is determined using the method of surface-based inversion, and the optimal BLH for the convective layer is determined using the method of elevated inversion. Finally, the optimal BLH and other meteorological parameters were combined to predict the PM2.5 concentrations using the stepwise regression method. The results indicate that for the stable boundary layer, the optimal stepwise regression model includes the factors of surface relative humidity, BLH, and surface temperature. These three factors can significantly enhance the prediction accuracy of ground-level PM2.5 concentrations, with an increase of determination coefficient from 0.50 to 0.68. For the convective boundary layer, however, the optimal stepwise regression model includes the factors of BLH and surface wind speed. These two factors improve the determination coefficient, with a relatively low increase from 0.65 to 0.70. It is found that the

  2. A method for determining customer requirement weights based on TFMF and TLR

    Science.gov (United States)

    Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

    2013-11-01

    'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

  3. Use of the dry-weight-rank method of botanical analysis in the ...

    African Journals Online (AJOL)

    The dry-weight-rank method of botanical analysis was tested in the highveld of the Eastern Transvaal and was found to be an efficient and accurate means of determining the botanical composition of veld herbage. Accuracy was increased by weighting ranks on the basis of quadrat yield, and by allocation of equal ranks to ...

  4. Study of junior weight lifters’ special fitness with different methods of speed-power training in preparatory period of general preparatory stage

    Directory of Open Access Journals (Sweden)

    O. B. Piven

    2015-09-01

    Full Text Available Purpose: studying of junior weight lifters’ special fitness in preparatory period of general preparatory stage. Material: 30 junior weight lifters of 12 - 14 years’ old age were involved in experiment (2 nd and 3 rd sport grades. Results: optimal indicators of training by shock method have been determined for sportsmen of experimental group. Scope of loads was: squats with barbell on shoulders - lifting 779 times (90 tons; 310 jumps in depth and jumps out. Power indicators in total of combined exercises have increased by 16.5 kg. In control group other methodic was used. In control group scope of loads was: lifting of barbell - 910 times (111 tons. Power indicators in total of combined exercises have increased by 7.2 kg. Conclusions: the following regiment of training is recommended: first 3 weeks - jumps. Dozing and load scopes shall be as follows: first two trainings - two attempts (10 times each with height of 0.5 m; third training - 3 attempts (10 times each with height of 0.5 m; forth training - 4 attempts (10 times each with height of 0.7 m. Jumps in depth shall be used 3 times weekly.

  5. College Freshman Stress and Weight Change: Differences by Gender

    Science.gov (United States)

    Economos, Christina D.; Hildebrandt, M. Lise; Hyatt, Raymond R.

    2008-01-01

    Objectives: To examine how stress and health-related behaviors affect freshman weight change by gender. Methods: Three hundred ninety-six freshmen completed a 40-item health behavior survey and height and weight were collected at baseline and follow-up. Results: Average weight change was 5.04 lbs for males, 5.49 lbs for females. Weight gain was…

  6. Unified height systems after GOCE

    Science.gov (United States)

    Rummel, Reiner; Gruber, Thomas; Sideris, Michael; Rangelova, Elena; Woodworth, Phil; Hughes, Chris; Ihde, Johannes; Liebsch, Gunter; Rülke, Axel; Gerlach, Christian; Haagmans, Roger

    2015-04-01

    The objectives of global height unification are twofold, (1) the realization of accurate geopotential numbers C together with their standard deviation σ(C) at a selected set of stations (datum points of national height systems, geodetic fundamental stations (IERS), primary tide gauges (PSMSL) and primary reference clocks (IERS)) and (2) the determination of height off-sets between all existing regional/national height systems and one global height reference. In the future the primary method of height determination will be GPS-levelling with very stringent requirements concerning the consistency of the positioning and the gravity potential difference part. Consistency is required in terms of the applied standards (ITRF, zero tide system, geodetic reference system). Geopotential differences will be based on a next generation geopotential model combining GOCE and GRACE and a best possible collection of global terrestrial and altimetric gravity and topographic data. Ultimately, the envisaged accuracy of height unification is about 10 cm2/s2 (or 1cm). At the moment, in well surveyed regions, an accuracy of about 40 to 60 cm2/s2 (or 4 to 6cm) is attainable. Objective One can be realized by straight forward computation of geopotential numbers C, i.e. geopotential differences relative to an adopted height reference. No adjustment is required for this. Objective Two, the unification of existing height systems is achieved by employing a least-squares adjustment based on the GBVP-approach. In order to attain a non-singular solution, this requires for each included datum zone at least one geo-referenced station per zone, i.e. its ellipsoidal height h and, in addition, the corresponding physical height H (geopotential number, normal height, orthometric height, etc.). Changes in geopotential numbers of consecutive realizations reflect (1) temporal changes of station heights, (2) improvements or changes of the applied geopotential (or geoid) model and (3) improvements of the

  7. Calculation of the importance-weighted neutron generation time using MCNIC method

    International Nuclear Information System (INIS)

    Feghhi, S.A.H.; Shahriari, M.; Afarideh, H.

    2008-01-01

    In advanced nuclear power systems, such as ADS, the need for reliable kinetics parameters is of considerable importance because of the lower value for β eff due to the large amount of transuranic elements loaded in the core of those systems. All reactor kinetic parameters are weighted quantities. In other words each neutron with a given position and energy is weighted with its importance. Neutron generation time as an important kinetic parameter, in all nuclear power systems has a significant role in the analysis of fast transients. The difference between non-weighted neutron generation time; Λ; standard in most Monte Carlo codes; and the weighted one Λ + can be quite significant depending on the type of the system. In previous work, based on the physical concept of neutron importance, a new method; MCNIC; using the MCNP code has been introduced for the calculation of neutron importance in fissionable assemblies for all criticality states. In the present work the applicability of MCNIC method has been extended for the calculation of the importance-weighted neutron generation time. The influence of reflector thickness on importance-weighted neutron generation time has been investigated by the development of an auxiliary code, IWLA, for a hypothetic assembly. The results of these calculations were compared with the non-weighted neutron generation times calculated using the Monte Carlo code MCNP. The difference between the importance-weighted and non-weighted quantity is more significant in a reflected system and increases with reflector thickness

  8. Sparsity-weighted outlier FLOODing (OFLOOD) method: Efficient rare event sampling method using sparsity of distribution.

    Science.gov (United States)

    Harada, Ryuhei; Nakamura, Tomotake; Shigeta, Yasuteru

    2016-03-30

    As an extension of the Outlier FLOODing (OFLOOD) method [Harada et al., J. Comput. Chem. 2015, 36, 763], the sparsity of the outliers defined by a hierarchical clustering algorithm, FlexDice, was considered to achieve an efficient conformational search as sparsity-weighted "OFLOOD." In OFLOOD, FlexDice detects areas of sparse distribution as outliers. The outliers are regarded as candidates that have high potential to promote conformational transitions and are employed as initial structures for conformational resampling by restarting molecular dynamics simulations. When detecting outliers, FlexDice defines a rank in the hierarchy for each outlier, which relates to sparsity in the distribution. In this study, we define a lower rank (first ranked), a medium rank (second ranked), and the highest rank (third ranked) outliers, respectively. For instance, the first-ranked outliers are located in a given conformational space away from the clusters (highly sparse distribution), whereas those with the third-ranked outliers are nearby the clusters (a moderately sparse distribution). To achieve the conformational search efficiently, resampling from the outliers with a given rank is performed. As demonstrations, this method was applied to several model systems: Alanine dipeptide, Met-enkephalin, Trp-cage, T4 lysozyme, and glutamine binding protein. In each demonstration, the present method successfully reproduced transitions among metastable states. In particular, the first-ranked OFLOOD highly accelerated the exploration of conformational space by expanding the edges. In contrast, the third-ranked OFLOOD reproduced local transitions among neighboring metastable states intensively. For quantitatively evaluations of sampled snapshots, free energy calculations were performed with a combination of umbrella samplings, providing rigorous landscapes of the biomolecules. © 2015 Wiley Periodicals, Inc.

  9. Methods and Magnitudes of Rapid Weight Loss in Judo Athletes Over Pre-Competition Periods

    Directory of Open Access Journals (Sweden)

    Kons Rafael Lima

    2017-06-01

    Full Text Available Purpose. The study aimed to analyse the methods and magnitudes of rapid weight loss (RWL in judo team members in distinct periods before the biggest state competition in Southern Brazil.

  10. A New Global Regression Analysis Method for the Prediction of Wind Tunnel Model Weight Corrections

    Science.gov (United States)

    Ulbrich, Norbert Manfred; Bridge, Thomas M.; Amaya, Max A.

    2014-01-01

    A new global regression analysis method is discussed that predicts wind tunnel model weight corrections for strain-gage balance loads during a wind tunnel test. The method determines corrections by combining "wind-on" model attitude measurements with least squares estimates of the model weight and center of gravity coordinates that are obtained from "wind-off" data points. The method treats the least squares fit of the model weight separate from the fit of the center of gravity coordinates. Therefore, it performs two fits of "wind- off" data points and uses the least squares estimator of the model weight as an input for the fit of the center of gravity coordinates. Explicit equations for the least squares estimators of the weight and center of gravity coordinates are derived that simplify the implementation of the method in the data system software of a wind tunnel. In addition, recommendations for sets of "wind-off" data points are made that take typical model support system constraints into account. Explicit equations of the confidence intervals on the model weight and center of gravity coordinates and two different error analyses of the model weight prediction are also discussed in the appendices of the paper.

  11. GIS-Based Integration of Subjective and Objective Weighting Methods for Regional Landslides Susceptibility Mapping

    Directory of Open Access Journals (Sweden)

    Suhua Zhou

    2016-04-01

    Full Text Available The development of landslide susceptibility maps is of great importance due to rapid urbanization. The purpose of this study is to present a method to integrate the subjective weight with objective weight for regional landslide susceptibility mapping on the geographical information system (GIS platform. The analytical hierarchy process (AHP, which is subjective, was employed to weight predictive factors’ contribution to landslide occurrence. The frequency ratio (FR method, which is objective, was used to derive subclasses’ frequency ratio with respect to landslides that indicate the relative importance of a subclass within each predictive factor. A case study was carried out at Tsushima Island, Japan, using a historical inventory of 534 landslides and seven predictive factors: elevation, slope, aspect, terrain roughness index (TRI, lithology, land cover and mean annual precipitation (MAP. The landslide susceptibility index (LSI was calculated using the weighted linear combination of factors’ weights and subclasses’ weights. The study area was classified into five susceptibility zones according to the LSI. In addition, the produced susceptibility map was compared with maps generated using the conventional FR and AHP method and validated using the relative landslide index (RLI. The validation result showed that the proposed method performed better than the conventional application of the FR method and AHP method. The obtained landslide susceptibility maps could serve as a scientific basis for urban planning and landslide hazard management.

  12. A Fuzzy Group Prioritization Method for Deriving Weights and its Software Implementation

    Directory of Open Access Journals (Sweden)

    Tarifa Almulhim

    2013-09-01

    Full Text Available Several Multi-Criteria Decision Making (MCDM methods involve pairwise comparisons to obtain the preferences of decision makers (DMs. This paper proposes a fuzzy group prioritization method for deriving group priorities/weights from fuzzy pairwise comparison matrices. The proposed method extends the Fuzzy Preferences Programming Method (FPP by considering the different importance weights of multiple DMs . The elements of the group pairwise comparison matrices are presented as fuzzy numbers rather than exact numerical values, in order to model the uncertainty and imprecision in the DMs’ judgments. Unlike the known fuzzy prioritization techniques, the proposed method is able to derive crisp weights from incomplete and fuzzy set of comparison judgments and does not require additional aggregation procedures. A prototype of a decision tool is developed to assist DMs to implement the proposed method for solving fuzzy group prioritization problems in MATLAB. Detailed numerical examples are used to illustrate the proposed approach.

  13. Encounter Probability of Individual Wave Height

    DEFF Research Database (Denmark)

    Liu, Z.; Burcharth, H. F.

    1998-01-01

    wave height corresponding to a certain exceedence probability within a structure lifetime (encounter probability), based on the statistical analysis of long-term extreme significant wave height. Then the design individual wave height is calculated as the expected maximum individual wave height...... associated with the design significant wave height, with the assumption that the individual wave heights follow the Rayleigh distribution. However, the exceedence probability of such a design individual wave height within the structure lifetime is unknown. The paper presents a method for the determination...... of the design individual wave height corresponding to an exceedence probability within the structure lifetime, given the long-term extreme significant wave height. The method can also be applied for estimation of the number of relatively large waves for fatigue analysis of constructions....

  14. Fear of heights and visual height intolerance.

    Science.gov (United States)

    Brandt, Thomas; Huppert, Doreen

    2014-02-01

    The aim of this review is, first, to cover the different aspects of visual height intolerance such as historical descriptions, definition of terms, phenomenology of the condition, neurophysiological control of gaze, stance and locomotion, and therapy, and, second, to identify warranted epidemiological and experimental studies. Vivid descriptions of fear of heights can be found in ancient texts from the Greek, Roman, and Chinese classics. The life-time prevalence of visual height intolerance is as high as 28% in the general population, and about 50% of those who are susceptible report an impact on quality of life. When exposed to heights, visual exploration by eye and head movements is restricted, and the velocity of locomotion is reduced. Therapy for fear of heights is dominated by the behavioral techniques applied during real or virtual reality exposure. Their efficacy might be facilitated by the administration of D-cycloserine or glucocorticoids. Visual height intolerance has a considerable impact on daily life and interpersonal interactions. It is much more frequent than fear of heights, which is defined as an environmental subtype of a specific phobia. There is certainly a continuum stretching from acrophobia to a less-pronounced visual height intolerance, to which the categorical distinction of a specific phobia does not apply.

  15. Iteratively re-weighted bi-cubic spline representation of corneal topography and its comparison to the standard methods.

    Science.gov (United States)

    Zhu, Zhongxia; Janunts, Edgar; Eppig, Timo; Sauer, Tomas; Langenbucher, Achim

    2010-01-01

    The aim of this study is to represent the corneal anterior surface by utilizing radius and height data extracted from a TMS-2N topographic system with three different mathematical approaches and to simulate the visual performance. An iteratively re-weighted bi-cubic spline method is introduced for the local representation of the corneal surface. For comparison, two standard mathematical global representation approaches are used: the general quadratic function and the higher order Taylor polynomial approach. First, these methods were applied in simulations using three corneal models. Then, two real eye examples were investigated: one eye with regular astigmatism, and one eye which had undergone refractive surgery. A ray-tracing program was developed to evaluate the imaging performance of these examples with each surface representation strategy at the best focus plane. A 6 mm pupil size was chosen for the simulation. The fitting error (deviation) of the presented methods was compared. It was found that the accuracy of the topography representation was worst using the quadratic function and best with bicubic spline. The quadratic function cannot precisely describe the irregular corneal shape. In order to achieve a sub-micron fitting precision, the Taylor polynomial's order selection behaves adaptive to the corneal shape. The bi-cubic spline shows more stable performance. Considering the visual performance, the more precise the cornea representation is, the worse the visual performance is. The re-weighted bi-cubic spline method is a reasonable and stable method for representing the anterior corneal surface in measurements using a Placido-ring-pattern-based corneal topographer. Copyright © 2010. Published by Elsevier GmbH.

  16. Constructing inverse probability weights for continuous exposures: a comparison of methods.

    Science.gov (United States)

    Naimi, Ashley I; Moodie, Erica E M; Auger, Nathalie; Kaufman, Jay S

    2014-03-01

    Inverse probability-weighted marginal structural models with binary exposures are common in epidemiology. Constructing inverse probability weights for a continuous exposure can be complicated by the presence of outliers, and the need to identify a parametric form for the exposure and account for nonconstant exposure variance. We explored the performance of various methods to construct inverse probability weights for continuous exposures using Monte Carlo simulation. We generated two continuous exposures and binary outcomes using data sampled from a large empirical cohort. The first exposure followed a normal distribution with homoscedastic variance. The second exposure followed a contaminated Poisson distribution, with heteroscedastic variance equal to the conditional mean. We assessed six methods to construct inverse probability weights using: a normal distribution, a normal distribution with heteroscedastic variance, a truncated normal distribution with heteroscedastic variance, a gamma distribution, a t distribution (1, 3, and 5 degrees of freedom), and a quantile binning approach (based on 10, 15, and 20 exposure categories). We estimated the marginal odds ratio for a single-unit increase in each simulated exposure in a regression model weighted by the inverse probability weights constructed using each approach, and then computed the bias and mean squared error for each method. For the homoscedastic exposure, the standard normal, gamma, and quantile binning approaches performed best. For the heteroscedastic exposure, the quantile binning, gamma, and heteroscedastic normal approaches performed best. Our results suggest that the quantile binning approach is a simple and versatile way to construct inverse probability weights for continuous exposures.

  17. Self-perception and dissatisfaction with weight does not depend on the frequency of physical activity

    Directory of Open Access Journals (Sweden)

    Araújo Denise Sardinha Mendes Soares de

    2003-01-01

    Full Text Available OBJECTIVE: To evaluate the level of satisfaction with body weight and the self-perception of the weight/height ratio and to verify the influence of the frequency of present and past physical activity on these variables. METHODS: Using questionnaires or interviews, we obtained height data, reported and desired weight, self-perception of the weight/height ratio, and the frequency of current physical activity in 844 adults (489 women. Of these, evaluated the frequency of physical activity during high school of 193 individuals,and we measured their height and weight. RESULTS: Less than 2/3 of the individuals had body mass index between 20 and 24.9 kg/m2. A tendency existed to overestimate height by less than 1 cm and to underestimate weight by less than 1kg. Desired weight was less than that reported (p<0.001, and only 20% were satisfied with their current weight. Only 42% of men and 25% of women exercised regularly. No association was found between the frequency of physical activity and the variables height, weight, and body mass index, and the level of satisfaction with current weight. CONCLUSION: Height and weight reported seem to be valid for epidemological studies, and great dissatisfaction with body weight and a distorted self-perception of height/weight ratio exists, especially in women, regardless of the frequency of physical activity.

  18. How do low/high height and weight variation affect upper limb movements during manual material handling of industrial boxes? Como a variação de altura e massa da carga afetam os movimentos do membro superior durante o manuseio de caixas industriais?

    Directory of Open Access Journals (Sweden)

    Ana B. Oliveira

    2011-12-01

    Full Text Available OBJECTIVES: To evaluate the effect of surface height and load weight on upper limb movements and electromyographic (EMG recordings during manual handling performed by both experienced and inexperienced lifter subjects. METHODS: Sixteen experienced and sixteen inexperienced lifters handled a box (both 7 and 15 kg from an intermediate height (waist level to either a high or low surface. Electromyography and video images were recorded during the tasks. The 10th, 50th and 90th percentiles were calculated for the deltoid and biceps muscles, shoulder flexion, shoulder abduction, and elbow flexion movements. Groups, right/left sides, weights and heights were compared. There were no differences between either groups or sides. RESULTS: Weight and height variations affected EMG and posture, although weight had more impact on EMG. Shoulder abduction and flexion movements higher than 60º occurred, particularly for the higher surface. Shoulder flexion was also higher when the box was moved to the low height. This study provides new evidence as shoulder postures during boxes handling on low surfaces had not previously been evaluated. CONCLUSIONS: The high demand of upper limb in manual material handling tasks is clear, particularly for the shoulder. This knowledge can be used by physical therapists to plan better rehabilitation programs for manual material handling-related disorders, particularly focusing on return to work.OBJETIVOS: Avaliar o efeito da altura de superfície e massa da carga nos movimentos e na atividade eletromiográfica (EMG dos membros superiores durante o manuseio de carga realizado por sujeitos experientes e inexperientes. MÉTODOS: Dezesseis sujeitos experientes e 16 inexperientes manusearam uma caixa (7 e 15 kg de uma superfície com altura intermediária para uma superfície alta e/ou baixa. Durante as tarefas, foram registradas imagens de vídeo e EMG. Os dados foram processados para obtenção dos percentis 10, 50 e 90 referentes

  19. Stochastic weighted particle methods for population balance equations with coagulation, fragmentation and spatial inhomogeneity

    International Nuclear Information System (INIS)

    Lee, Kok Foong; Patterson, Robert I.A.; Wagner, Wolfgang; Kraft, Markus

    2015-01-01

    Graphical abstract: -- Highlights: •Problems concerning multi-compartment population balance equations are studied. •A class of fragmentation weight transfer functions is presented. •Three stochastic weighted algorithms are compared against the direct simulation algorithm. •The numerical errors of the stochastic solutions are assessed as a function of fragmentation rate. •The algorithms are applied to a multi-dimensional granulation model. -- Abstract: This paper introduces stochastic weighted particle algorithms for the solution of multi-compartment population balance equations. In particular, it presents a class of fragmentation weight transfer functions which are constructed such that the number of computational particles stays constant during fragmentation events. The weight transfer functions are constructed based on systems of weighted computational particles and each of it leads to a stochastic particle algorithm for the numerical treatment of population balance equations. Besides fragmentation, the algorithms also consider physical processes such as coagulation and the exchange of mass with the surroundings. The numerical properties of the algorithms are compared to the direct simulation algorithm and an existing method for the fragmentation of weighted particles. It is found that the new algorithms show better numerical performance over the two existing methods especially for systems with significant amount of large particles and high fragmentation rates.

  20. Stochastic weighted particle methods for population balance equations with coagulation, fragmentation and spatial inhomogeneity

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kok Foong [Department of Chemical Engineering and Biotechnology, University of Cambridge, New Museums Site, Pembroke Street, Cambridge CB2 3RA (United Kingdom); Patterson, Robert I.A.; Wagner, Wolfgang [Weierstrass Institute for Applied Analysis and Stochastics, Mohrenstraße 39, 10117 Berlin (Germany); Kraft, Markus, E-mail: mk306@cam.ac.uk [Department of Chemical Engineering and Biotechnology, University of Cambridge, New Museums Site, Pembroke Street, Cambridge CB2 3RA (United Kingdom); School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, Singapore, 637459 (Singapore)

    2015-12-15

    Graphical abstract: -- Highlights: •Problems concerning multi-compartment population balance equations are studied. •A class of fragmentation weight transfer functions is presented. •Three stochastic weighted algorithms are compared against the direct simulation algorithm. •The numerical errors of the stochastic solutions are assessed as a function of fragmentation rate. •The algorithms are applied to a multi-dimensional granulation model. -- Abstract: This paper introduces stochastic weighted particle algorithms for the solution of multi-compartment population balance equations. In particular, it presents a class of fragmentation weight transfer functions which are constructed such that the number of computational particles stays constant during fragmentation events. The weight transfer functions are constructed based on systems of weighted computational particles and each of it leads to a stochastic particle algorithm for the numerical treatment of population balance equations. Besides fragmentation, the algorithms also consider physical processes such as coagulation and the exchange of mass with the surroundings. The numerical properties of the algorithms are compared to the direct simulation algorithm and an existing method for the fragmentation of weighted particles. It is found that the new algorithms show better numerical performance over the two existing methods especially for systems with significant amount of large particles and high fragmentation rates.

  1. A Combined Weighting Method Based on Hybrid of Interval Evidence Fusion and Random Sampling

    OpenAIRE

    Yan, Ying; Suo, Bin

    2017-01-01

    Due to the complexity of system and lack of expertise, epistemic uncertainties may present in the experts’ judgment on the importance of certain indices during group decision-making. A novel combination weighting method is proposed to solve the index weighting problem when various uncertainties are present in expert comments. Based on the idea of evidence theory, various types of uncertain evaluation information are uniformly expressed through interval evidence structures. Similarity matrix b...

  2. The application of entropy weight topsis method for optimal choice in low radiological decorative building materials

    International Nuclear Information System (INIS)

    Feng Guangwen; Hu Youhua; Liu Qian

    2010-01-01

    In this paper, the principle of TOPSIS method was introduced and applied to sorting the given indexes of glazed brick and granite respectively in different areas' decorative building materials in order to selecting the optimal low radiological decorative building materials. First, the entropy weight TOPSIS method was used for data processing about the sample numbers and radio nuclides content, and then different weights were given to different indexes. Finally, by using the SAS software for data analysis and sorting, we obtained that the optimal low radiological decorative building materials were Sichuan glazed brick and Henan granite. Through the results, it could be seen that the application of entropy weight TOPSIS method in selecting low radiological decorative building materials was feasible, and it will also provide the method reference. (authors)

  3. Comparison of three methods for measuring height in rehabilitation inpatients and the impact on body mass index classification: An open prospective study.

    Science.gov (United States)

    McDougall, Karen E; Stewart, Alison J; Argiriou, Alison M; Huggins, Catherine E; New, Peter W

    2018-02-01

    To compare standing height, estimated current height and demi-span estimated height and examine their impact on body mass index (BMI) classification. Cross-sectional data was collected on 104 patients admitted to an adult rehabilitation ward and seen by the dietitian. Patient's standing, estimated current height and demi-span estimated height were collected and grouped by age: 19-64 and ≥65 years. The limits of agreement (95% confidence interval) for estimated current height compared with standing height were +9.9 cm and -7.9 cm, in contrast to +8.7 cm and -14.3 cm for demi-span estimated height. Demi-span underestimated height when compared with standing height in both age groups, 19-64 years: (mean ± SD) 3.0 ± 6.5 cm (P = 0.001, n = 68) and ≥ 65 year age group 4.0 ± 6.0 cm (P < 0.001, n = 36), resulting in a significantly greater mean BMI (analysis of variance P < 0.001, P = 0.02). In the 19-64 and ≥65 year age groups, 3% (2/68) and 10% (4/36) of patients, respectively, had a different BMI classification using demi-span estimated height compared with standing height. Estimated current height is a simple and practical alternative if standing height is unable to be obtained when performing a nutrition assessment. Demi-span estimated height should be used with caution when calculating BMI to assess nutritional status, particularly in the elderly. © 2017 Dietitians Association of Australia.

  4. Does the method of weight loss effect long-term changes in weight, body composition or chronic disease risk factors in overweight or obese adults? A systematic review.

    Directory of Open Access Journals (Sweden)

    Richard A Washburn

    Full Text Available Differences in biological changes from weight loss by energy restriction and/or exercise may be associated with differences in long-term weight loss/regain.To assess the effect of weight loss method on long-term changes in weight, body composition and chronic disease risk factors.PubMed and Embase were searched (January 1990-October 2013 for studies with data on the effect of energy restriction, exercise (aerobic and resistance on long-term weight loss. Twenty articles were included in this review.Primary source, peer reviewed randomized trials published in English with an active weight loss period of >6 months, or active weight loss with a follow-up period of any duration, conducted in overweight or obese adults were included.Considerable heterogeneity across trials existed for important study parameters, therefore a meta-analysis was considered inappropriate. Results were synthesized and grouped by comparisons (e.g. diet vs. aerobic exercise, diet vs. diet + aerobic exercise etc. and study design (long-term or weight loss/follow-up.Forty percent of trials reported significantly greater long-term weight loss with diet compared with aerobic exercise, while results for differences in weight regain were inconclusive. Diet+aerobic exercise resulted in significantly greater weight loss than diet alone in 50% of trials. However, weight regain (∼ 55% of loss was similar in diet and diet+aerobic exercise groups. Fat-free mass tended to be preserved when interventions included exercise.

  5. A new method of calculation of thyroid weight, using computed tomography

    International Nuclear Information System (INIS)

    Sugimura, Kazuro; Matsuo, Michimasa; Sugimura, Chie; Nishiyama, Shoji; Narabayashi, Isamu; Kimura, Shuji

    1983-01-01

    The weight of the thyroid gland is an important factor for determination of dose of the radioactive iodine that is used for the management of hyperthyroidism. Various methods employing scintigraphic image have been employed for estimation of the thyroid weight, but the error by these methods has been greater than 40 per cent. In this study, a new technique has been developed for more accurate estimation of the weight of the thyroid glands employing the distinctive system of three dimensional reconstruction with the simultaneous calculation of the volume of the thyroid using CT images. By this technique, the volume of thyroid phantom could be calculated with lesser than 9.4 per cent error. The proper interval of CT scan was 10 mm for satisfactory measurement. In 18 patients who have undergone thyroidectomy, the thyroid weight that had been estimated by our technique was compared with the actual weight of the excised specimen. There was a satisfactory correlation with 11.3 +- 7.5 per cent error. It has been concluded that our technique provides more accurate estimation of the weight of the thyroid glands than any other methods which have been previously employed. (author)

  6. The QAP weighted network analysis method and its application in international services trade

    Science.gov (United States)

    Xu, Helian; Cheng, Long

    2016-04-01

    Based on QAP (Quadratic Assignment Procedure) correlation and complex network theory, this paper puts forward a new method named QAP Weighted Network Analysis Method. The core idea of the method is to analyze influences among relations in a social or economic group by building a QAP weighted network of networks of relations. In the QAP weighted network, a node depicts a relation and an undirect edge exists between any pair of nodes if there is significant correlation between relations. As an application of the QAP weighted network, we study international services trade by using the QAP weighted network, in which nodes depict 10 kinds of services trade relations. After the analysis of international services trade by QAP weighted network, and by using distance indicators, hierarchy tree and minimum spanning tree, the conclusion shows that: Firstly, significant correlation exists in all services trade, and the development of any one service trade will stimulate the other nine. Secondly, as the economic globalization goes deeper, correlations in all services trade have been strengthened continually, and clustering effects exist in those services trade. Thirdly, transportation services trade, computer and information services trade and communication services trade have the most influence and are at the core in all services trade.

  7. A Gradient Weighted Moving Finite-Element Method with Polynomial Approximation of Any Degree

    Directory of Open Access Journals (Sweden)

    Ali R. Soheili

    2009-01-01

    Full Text Available A gradient weighted moving finite element method (GWMFE based on piecewise polynomial of any degree is developed to solve time-dependent problems in two space dimensions. Numerical experiments are employed to test the accuracy and effciency of the proposed method with nonlinear Burger equation.

  8. Research Notes Use of the dry-weight-rank method of botanical ...

    African Journals Online (AJOL)

    When used in combination with the double sampling (or comparative yield) method of yield estimation, the dry-weight-rank method of botanical analysis provides a rapid non-destructive means of estimating botanical composition. The composition is expressed in terms of the contribution of individual species to total herbage ...

  9. Aortic and Hepatic Contrast Enhancement During Hepatic-Arterial and Portal Venous Phase Computed Tomography Scanning: Multivariate Linear Regression Analysis Using Age, Sex, Total Body Weight, Height, and Cardiac Output.

    Science.gov (United States)

    Masuda, Takanori; Nakaura, Takeshi; Funama, Yoshinori; Higaki, Toru; Kiguchi, Masao; Imada, Naoyuki; Sato, Tomoyasu; Awai, Kazuo

    We evaluated the effect of the age, sex, total body weight (TBW), height (HT) and cardiac output (CO) of patients on aortic and hepatic contrast enhancement during hepatic-arterial phase (HAP) and portal venous phase (PVP) computed tomography (CT) scanning. This prospective study received institutional review board approval; prior informed consent to participate was obtained from all 168 patients. All were examined using our routine protocol; the contrast material was 600 mg/kg iodine. Cardiac output was measured with a portable electrical velocimeter within 5 minutes of starting the CT scan. We calculated contrast enhancement (per gram of iodine: [INCREMENT]HU/gI) of the abdominal aorta during the HAP and of the liver parenchyma during the PVP. We performed univariate and multivariate linear regression analysis between all patient characteristics and the [INCREMENT]HU/gI of aortic- and liver parenchymal enhancement. Univariate linear regression analysis demonstrated statistically significant correlations between the [INCREMENT]HU/gI and the age, sex, TBW, HT, and CO (all P linear regression analysis showed that only the TBW and CO were of independent predictive value (P linear regression analysis only the TBW and CO were significantly correlated with aortic and liver parenchymal enhancement; the age, sex, and HT were not. The CO was the only independent factor affecting aortic and liver parenchymal enhancement at hepatic CT when the protocol was adjusted for the TBW.

  10. Comparative evaluation of hemodynamic and respiratory parameters during mechanical ventilation with two tidal volumes calculated by demi-span based height and measured height in normal lungs

    Directory of Open Access Journals (Sweden)

    L Mousavi Seresht

    2014-01-01

    Full Text Available Background : Appropriate determination of tidal volume (VT is important for preventing ventilation induced lung injury. We compared hemodynamic and respiratory parameters in two conditions of receiving VTs calculated by using body weight (BW, which was estimated by measured height (HBW or demi-span based body weight (DBW. Materials and Methods : This controlled-trial was conducted in St. Alzahra Hospital in 2009 on American Society of Anesthesiologists (ASA I and II, 18-65-years-old patients. Standing height and weight were measured and then height was calculated using demi-span method. BW and VT were calculated with acute respiratory distress syndrome-net formula. Patients were randomized and then crossed to receive ventilation with both calculated VTs for 20 min. Hemodynamic and respiratory parameters were analyzed with SPSS version 20.0 using univariate and multivariate analyses. Results : Forty nine patients were studied. Demi-span based body weight and thus VT (DTV were lower than Height based body weight and VT (HTV (P = 0.028, in male patients (P = 0.005. Difference was observed in peak airway pressure (PAP and airway resistance (AR changes with higher PAP and AR at 20 min after receiving HTV compared with DTV. Conclusions : Estimated VT based on measured height is higher than that based on demi-span and this difference exists only in females, and this higher VT results higher airway pressures during mechanical ventilation.

  11. Linear, Transfinite and Weighted Method for Interpolation from Grid Lines Applied to OCT Images

    DEFF Research Database (Denmark)

    Lindberg, Anne-Sofie Wessel; Jørgensen, Thomas Martini; Dahl, Vedrana Andersen

    2018-01-01

    of a square grid, but are unknown inside each square. To view these values as an image, intensities need to be interpolated at regularly spaced pixel positions. In this paper we evaluate three methods for interpolation from grid lines: linear, transfinite and weighted. The linear method does not preserve...... and the stability of the linear method further away. An important parameter influencing the performance of the interpolation methods is the upsampling rate. We perform an extensive evaluation of the three interpolation methods across a range of upsampling rates. Our statistical analysis shows significant difference...... in the performance of the three methods. We find that the transfinite interpolation works well for small upsampling rates and the proposed weighted interpolation method performs very well for all upsampling rates typically used in practice. On the basis of these findings we propose an approach for combining two OCT...

  12. Memory-efficient calculations of adjoint-weighted tallies by the Monte Carlo Wielandt method

    International Nuclear Information System (INIS)

    Choi, Sung Hoon; Shim, Hyung Jin

    2016-01-01

    Highlights: • The MC Wielandt method is applied to reduce memory for the adjoint estimation. • The adjoint-weighted kinetics parameters are estimated in the MC Wielandt calculations. • The MC S/U analyses are conducted in the MC Wielandt calculations. - Abstract: The current Monte Carlo (MC) adjoint-weighted tally techniques based on the iterated fission probability (IFP) concept require a memory amount which is proportional to the numbers of the adjoint-weighted tallies and histories per cycle to store history-wise tally estimates during the convergence of the adjoint flux. Especially the conventional MC adjoint-weighted perturbation (AWP) calculations for the nuclear data sensitivity and uncertainty (S/U) analysis suffer from the huge memory consumption to realize the IFP concept. In order to reduce the memory requirement drastically, we present a new adjoint estimation method in which the memory usage is irrelevant to the numbers of histories per cycle by applying the IFP concept for the MC Wielandt calculations. The new algorithms for the adjoint-weighted kinetics parameter estimation and the AWP calculations in the MC Wielandt method are implemented in a Seoul National University MC code, McCARD and its validity is demonstrated in critical facility problems. From the comparison of the nuclear data S/U analyses, it is demonstrated that the memory amounts to store the sensitivity estimates in the proposed method become negligibly small.

  13. Genetically Determined Height and Coronary Artery Disease

    NARCIS (Netherlands)

    Nelson, Christopher P.; Hamby, Stephen E.; Saleheen, Danish; Hopewell, Jenna C.; Zeng, Lingyao; Assimes, Themistocles L.; Kanoni, Stavroula; Willenborg, Christina; Burgess, Stephen; Amouyel, Phillipe; Anand, Sonia; Blankenberg, Stefan; Boehm, Bernhard O.; Clarke, Robert J.; Collins, Rory; Dedoussis, George; Farrall, Martin; Franks, Paul W.; Groop, Leif; Hall, Alistair S.; Hamsten, Anders; Hengstenberg, Christian; Hovingh, G. Kees; Ingelsson, Erik; Kathiresan, Sekar; Kee, Frank; König, Inke R.; Kooner, Jaspal; Lehtimäki, Terho; März, Winifred; McPherson, Ruth; Metspalu, Andres; Nieminen, Markku S.; O'Donnell, Christopher J.; Palmer, Colin N. A.; Peters, Annette; Perola, Markus; Reilly, Muredach P.; Ripatti, Samuli; Roberts, Robert; Salomaa, Veikko; Shah, Svati H.; Schreiber, Stefan; Siegbahn, Agneta; Thorsteinsdottir, Unnur; Veronesi, Giovani; Wareham, Nicholas; Willer, Cristen J.; Zalloua, Pierre A.; Erdmann, Jeanette

    2015-01-01

    BACKGROUND The nature and underlying mechanisms of an inverse association between adult height and the risk of coronary artery disease (CAD) are unclear. METHODS We used a genetic approach to investigate the association between height and CAD, using 180 height-associated genetic variants. We tested

  14. A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Yang Yulan [Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under Ministry of Education, Chongqing University, Chongqing (China); College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou (China); Li Baizhan [Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under the Ministry of Education, Chongqing University, Chongqing (China); Yao Runming, E-mail: r.yao@reading.ac.u [School of Construction Management and Engineering, University of Reading, Reading (United Kingdom); Key Laboratory of the Three Gorges Reservoir Region' s Eco-Environment under Ministry of Education, Chongqing University, Chongqing (China)

    2010-12-15

    This paper describes a method of identifying and weighting indicators for assessing the energy efficiency of residential buildings in China. A list of indicators of energy efficiency assessment in residential buildings in the hot summer and cold winter zone in China has been proposed, which supplies an important reference for policy makings in energy efficiency assessment in buildings. The research method applies a wide-ranging literature review and a questionnaire survey involving experts in the field. The group analytic hierarchy process (group AHP) has been used to weight the identified indicators. The size of survey samples are sufficient to support the results, which has been validated by consistency estimation. The proposed method could also be extended to develop the weighted indicators for other climate zones in China. - Research highlights: {yields}Method of identifying indicators of building energy efficiency assessment. {yields}The group AHP method for weighting indicators. {yields}Method of solving multi-criteria decision making problems of choice and prioritisation in policy makings.

  15. A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings

    International Nuclear Information System (INIS)

    Yang Yulan; Li Baizhan; Yao Runming

    2010-01-01

    This paper describes a method of identifying and weighting indicators for assessing the energy efficiency of residential buildings in China. A list of indicators of energy efficiency assessment in residential buildings in the hot summer and cold winter zone in China has been proposed, which supplies an important reference for policy makings in energy efficiency assessment in buildings. The research method applies a wide-ranging literature review and a questionnaire survey involving experts in the field. The group analytic hierarchy process (group AHP) has been used to weight the identified indicators. The size of survey samples are sufficient to support the results, which has been validated by consistency estimation. The proposed method could also be extended to develop the weighted indicators for other climate zones in China. - Research highlights: →Method of identifying indicators of building energy efficiency assessment. →The group AHP method for weighting indicators. →Method of solving multi-criteria decision making problems of choice and prioritisation in policy makings.

  16. Fall from heights: does height really matter?

    Science.gov (United States)

    Alizo, G; Sciarretta, J D; Gibson, S; Muertos, K; Romano, A; Davis, J; Pepe, A

    2018-06-01

    Fall from heights is high energy injuries and constitutes a fraction of all fall-related trauma evaluations while bearing an increase in morbidity and mortality. We hypothesize that despite advancements in trauma care, the overall survivability has not improved in this subset of trauma patients. All adult trauma patients treated after sustaining a fall from heights during a 40-month period were retrospectively reviewed. Admission demographics, clinical data, fall height (ft), injury patterns, ISS, GCS, length of stay, and mortality were reviewed. 116 patients sustained a fall from heights, 90.4% accidental. A mean age of 37± 14.7 years, 86% male, and a fall height of 19 ± 10 ft were encountered. Admission GCS was 13 ± 2 with ISS 10 ± 11. Overall LOS was 6.6 ± 14.9 days and an ICU LOS of 2.8 ± 8.9 days. Falls ≥ 25 ft.(16%) had lower GCS 10.4 ± 5.8, increased ISS 22.6 ± 13.8, a fall height 37.9 ± 13.1 ft and associated increased mortality (p < 0.001). Mortality was 5.2%, a mean distance fallen of 39 ± 22 ft. and an ISS of 31.5 ±16.5. Brain injury was the leading cause of death, 50% with open skull fractures. Level of height fallen is a good predictor of overall outcome and survival. Despite advances in trauma care, death rates remain unchanged. Safety awareness and injury prevention programs are needed to reduce the risk of high-level falls.

  17. Treatment of uncertainty through the interval smart/swing weighting method: a case study

    Directory of Open Access Journals (Sweden)

    Luiz Flávio Autran Monteiro Gomes

    2011-12-01

    Full Text Available An increasingly competitive market means that many decisions must be taken, quickly and with precision, in complex, high risk scenarios. This combination of factors makes it necessary to use decision aiding methods which provide a means of dealing with uncertainty in the judgement of the alternatives. This work presents the use of the MAUT method, combined with the INTERVAL SMART/SWING WEIGHTING method. Although multicriteria decision aiding was not conceived specifically for tackling uncertainty, the combined use of MAUT and the INTERVAL SMART/SWING WEIGHTING method allows approaching decision problems under uncertainty. The main concepts which are involved in these two methods are described and their joint application to the case study concerning the selection of a printing service supplier is presented. The case study makes use of the WINPRE software as a support tool for the calculation of dominance. It is then concluded that the proposed approach can be applied to decision making problems under uncertainty.

  18. Using mixed methods to develop and evaluate an online weight management intervention.

    Science.gov (United States)

    Bradbury, Katherine; Dennison, Laura; Little, Paul; Yardley, Lucy

    2015-02-01

    This article illustrates the use of mixed methods in the development and evaluation of the Positive Online Weight Reduction (POWeR) programme, an e-health intervention designed to support sustainable weight loss. The studies outlined also explore how human support might enhance intervention usage and weight loss. Mixed methods were used to develop and evaluate POWeR. In the development phase, we drew on both quantitative and qualitative findings to plan and gain feedback on the intervention. Next, a feasibility trial, with nested qualitative study, explored what level of human support might lead to the most sustainable weight loss. Finally, a large community-based trial of POWeR, with nested qualitative study, explored whether the addition of brief telephone coaching enhances usage. Findings suggest that POWeR is acceptable and potentially effective. Providing human support enhanced usage in our trials, but was not unproblematic. Interestingly, there were some indications that more basic (brief) human support may produce more sustainable weight loss outcomes than more regular support. Qualitative interviews suggested that more regular support might foster reliance, meaning patients cannot sustain their weight losses when support ends. Qualitative findings in the community trial also suggested explanations for why many people may not take up the opportunity for human support. Integrating findings from both our qualitative and quantitative studies provided far richer insights than would have been gained using only a single method of inquiry. Further research should investigate the optimum delivery of human support needed to maximize sustainable weight loss in online interventions. Statement of contribution What is already known on this subject? There is evidence that human support may increase the effectiveness of e-health interventions. It is unclear what level of human support might be optimal or how human support improves effectiveness. Triangulation of

  19. Validity of Hip-worn Inertial Measurement Unit Compared to Jump Mat for Jump Height Measurement in Adolescents.

    Science.gov (United States)

    Rantalainen, T; Hesketh, K D; Rodda, C; Duckham, R L

    2018-06-16

    Jump tests assess lower body power production capacity, and can be used to evaluate athletic ability and development during growth. Wearable inertial measurement units (IMU) seem to offer a feasible alternative to laboratory-based equipment for jump height assessments. Concurrent validity of these devices for jump height assessments has only been established in adults. Therefore, the purpose of this study was to evaluate the concurrent validity of IMU-based jump height estimate compared to contact mat-based jump height estimate in adolescents. Ninety-five adolescents (10-13 years-of-age; girls N=41, height = 154 (SD 9) cm, weight = 44 (11) kg; boys N=54, height=156 (10) cm, weight = 46 (13) kg) completed three counter-movement jumps for maximal jump height on a contact mat. Inertial recordings (accelerations, rotations) were concurrently recorded with a hip-worn IMU (sampling at 256 Hz). Jump height was evaluated based on flight time. The mean IMU-derived jump height was 27.1 (SD 3.8) cm, and the corresponding mean jump-mat-derived value was 21.5 (3.4) cm. While a significant 26% mean difference was observed between the methods (5.5 [95% limits of agreement 2.2 to 8.9] cm, p = 0.006), the correspondence between methods was excellent (ICC = 0.89). The difference between methods was weakly positively associated with jump height (r = 0.28, P = 0.007). Take-off velocity derived jump height was also explored but produced only fair congruence. In conclusion, IMU-derived jump height exhibited excellent congruence to contact mat-based jump height and therefore presents a feasible alternative for jump height assessments in adolescents. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  20. Design and Methods of a Synchronous Online Motivational Interviewing Intervention for Weight Management

    Science.gov (United States)

    DiLillo, Vicki; Ingle, Krista; Harvey, Jean Ruth; West, Delia Smith

    2016-01-01

    Background While Internet-based weight management programs can facilitate access to and engagement in evidence-based lifestyle weight loss programs, the results have generally not been as effective as in-person programs. Furthermore, motivational interviewing (MI) has shown promise as a technique for enhancing weight loss outcomes within face-to-face programs. Objective This paper describes the design, intervention development, and analysis of a therapist-delivered online MI intervention for weight loss in the context of an online weight loss program. Methods The MI intervention is delivered within the context of a randomized controlled trial examining the efficacy of an 18-month, group-based, online behavioral weight control program plus individually administered, synchronous online MI sessions relative to the group-based program alone. Six individual 30-minute MI sessions are conducted in private chat rooms over 18 months by doctoral-level psychologists. Sessions use a semistructured interview format for content and session flow and incorporate core MI components (eg, collaborative agenda setting, open-ended questions, reflective listening and summary statements, objective data, and a focus on evoking and amplifying change talk). Results The project was funded in 2010 and enrollment was completed in 2012. Data analysis is currently under way and the first results are expected in 2016. Conclusions This is the first trial to test the efficacy of a synchronous online, one-on-one MI intervention designed to augment an online group behavioral weight loss program. If the addition of MI sessions proves to be successful, this intervention could be disseminated to enhance other distance-based weight loss interventions. Trial Registration Clinicaltrials.gov NCT01232699; https://clinicaltrials.gov/ct2/show/NCT01232699 PMID:27095604

  1. Does the Method of Weight Loss Effect Long-Term Changes in Weight, Body Composition or Chronic Disease Risk Factors in Overweight or Obese Adults? A Systematic Review

    Science.gov (United States)

    Washburn, Richard A.; Szabo, Amanda N.; Lambourne, Kate; Willis, Erik A.; Ptomey, Lauren T.; Honas, Jeffery J.; Herrmann, Stephen D.; Donnelly, Joseph E.

    2014-01-01

    Background Differences in biological changes from weight loss by energy restriction and/or exercise may be associated with differences in long-term weight loss/regain. Objective To assess the effect of weight loss method on long-term changes in weight, body composition and chronic disease risk factors. Data Sources PubMed and Embase were searched (January 1990-October 2013) for studies with data on the effect of energy restriction, exercise (aerobic and resistance) on long-term weight loss. Twenty articles were included in this review. Study Eligibility Criteria Primary source, peer reviewed randomized trials published in English with an active weight loss period of >6 months, or active weight loss with a follow-up period of any duration, conducted in overweight or obese adults were included. Study Appraisal and Synthesis Methods Considerable heterogeneity across trials existed for important study parameters, therefore a meta-analysis was considered inappropriate. Results were synthesized and grouped by comparisons (e.g. diet vs. aerobic exercise, diet vs. diet + aerobic exercise etc.) and study design (long-term or weight loss/follow-up). Results Forty percent of trials reported significantly greater long-term weight loss with diet compared with aerobic exercise, while results for differences in weight regain were inconclusive. Diet+aerobic exercise resulted in significantly greater weight loss than diet alone in 50% of trials. However, weight regain (∼55% of loss) was similar in diet and diet+aerobic exercise groups. Fat-free mass tended to be preserved when interventions included exercise. PMID:25333384

  2. Collection, collation and analysis of data in relation to reference heights and reference weights for female and male children and adolescents (0-18 years) in the EU, as well as in relation to the age of onset of puberty and the age at which different stages of puberty are reached in adolescents in the EU

    NARCIS (Netherlands)

    Buuren, S. van; Schönbeck, Y.; Dommelen, P. van

    2012-01-01

    Growth references of children 0-18 years living in the European Union (EU) are needed for the derivation of Dietary Reference Values (DRVs) for nutrients and other substances with a nutritional or physiological effect. This report presents harmonised growth references for height, weight and body

  3. Density and dry weight of pigweed by various weed control methods ...

    African Journals Online (AJOL)

    This study evaluates effects of various weeds control methods and nitrogen fertilizer resources on density and dry weight of pigweed and the performance of corn forage as factorial in full random block design with 3 repetitions in research farm of Ferdowsi Mashhad University in 2014. The test treatments include weed ...

  4. 48 CFR 215.404-70 - DD Form 1547, Record of Weighted Guidelines Method Application.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false DD Form 1547, Record of... TYPES CONTRACTING BY NEGOTIATION Contract Pricing 215.404-70 DD Form 1547, Record of Weighted Guidelines Method Application. Follow the procedures at PGI 215.404-70 for use of DD Form 1547 whenever a structured...

  5. 48 CFR 215.404-72 - Modified weighted guidelines method for nonprofit organizations other than FFRDCs.

    Science.gov (United States)

    2010-10-01

    ... Defense or a Secretary of a Department as receiving sustaining support on a cost-plus-fixed-fee basis from... METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 215.404-72 Modified weighted... of the costs in Block 20 of the DD Form 1547. Show the net (reduced) amount on the DD Form 1547. (ii...

  6. The Method of Subsuper Solutions for Weighted p(r-Laplacian Equation Boundary Value Problems

    Directory of Open Access Journals (Sweden)

    Zhimei Qiu

    2008-10-01

    Full Text Available This paper investigates the existence of solutions for weighted p(r-Laplacian ordinary boundary value problems. Our method is based on Leray-Schauder degree. As an application, we give the existence of weak solutions for p(x-Laplacian partial differential equations.

  7. Development and validation of a method to estimate body weight in ...

    African Journals Online (AJOL)

    Mid-arm circumference (MAC) has previously been used as a surrogate indicator of habitus, and the objective of this study was to determine whether MAC cut-off values could be used to predict habitus scores (HSs) to create an objective and standardised weight estimation methodology, the PAWPER XL-MAC method.

  8. Perceptions of Weight and Health Practices in Hispanic Children: A Mixed-Methods Study

    Directory of Open Access Journals (Sweden)

    Byron Alexander Foster

    2015-01-01

    Full Text Available Background. Perception of weight by parents of obese children may be associated with willingness to engage in behavior change. The relationship between parents’ perception of their child’s weight and their health beliefs and practices is poorly understood, especially among the Hispanic population which experiences disparities in childhood obesity. This study sought to explore the relationship between perceptions of weight and health beliefs and practices in a Hispanic population. Methods. A cross-sectional, mixed-methods approach was used with semistructured interviews conducted with parent-child (2–5 years old dyads in a primarily Hispanic, low-income population. Parents were queried on their perceptions of their child’s health, health practices, activities, behaviors, and beliefs. A grounded theory approach was used to analyze participants’ discussion of health practices and behaviors. Results. Forty parent-child dyads completed the interview. Most (58% of the parents of overweight and obese children misclassified their child’s weight status. The qualitative analysis showed that accurate perception of weight was associated with internal motivation and more concrete ideas of what healthy meant for their child. Conclusions. The qualitative data suggest there may be populations at different stages of readiness for change among parents of overweight and obese children, incorporating this understanding should be considered for interventions.

  9. A novel orthoimage mosaic method using a weighted A∗ algorithm - Implementation and evaluation

    Science.gov (United States)

    Zheng, Maoteng; Xiong, Xiaodong; Zhu, Junfeng

    2018-04-01

    The implementation and evaluation of a weighted A∗ algorithm for orthoimage mosaic with UAV (Unmanned Aircraft Vehicle) imagery is proposed. The initial seam-line network is firstly generated by standard Voronoi Diagram algorithm; an edge diagram is generated based on DSM (Digital Surface Model) data; the vertices (conjunction nodes of seam-lines) of the initial network are relocated if they are on high objects (buildings, trees and other artificial structures); and the initial seam-lines are refined using the weighted A∗ algorithm based on the edge diagram and the relocated vertices. Our method was tested with three real UAV datasets. Two quantitative terms are introduced to evaluate the results of the proposed method. Preliminary results show that the method is suitable for regular and irregular aligned UAV images for most terrain types (flat or mountainous areas), and is better than the state-of-the-art method in both quality and efficiency based on the test datasets.

  10. CALF CIRCUMFERENCE AT BIRTH: A SCREENING METHOD FOR DETECTION OF LOW BIRTH WEIGHT

    Directory of Open Access Journals (Sweden)

    Sandip Kumar

    2012-12-01

    Full Text Available Background: Low Birth Weight (LBW babies run a higher risk of morbidity and mortality in the perinatal period. However, in our country where almost 70-80% births take place at home and peripheral hospitals, taking accurate weight is a problem due to unavailability of weighing scale and trained personnel. Hence there is a constant search for newer methods to detect LBW babies so that early interventions can be instituted. Various authors have used different surrogate anthropometric measurements from different parts of our country. In the present study, an attempt was made to validate the feasibility of using calf circumference as a predictor of LBW babies that can be used by a trained or untrained person. Objectives: To study various anthropometric measurements including calf circumference in newborns and to correlate various measurements with birth weight. Methods: The present study was conducted in the department of Social & Preventive Medicine, MLB Medical College, Jhansi (UP for a period of one year. The study included 1100 consecutively delivered neonates in the maternity ward of MLB Medical College Hospital, Jhansi (UP. The birth weight (Wt, crown heel length (CHL, crown rump length (CRL, head circumference (HC, chest circumference (CC, mid arm circumference (MAC, thigh circumference (TC and calf circumference (CC by standard techniques. All the measurements were taken by a single person throughout the study period with in 24 hours of delivery. Standard statistical methods were adopted for determination of critical limit, sensitivity, specificity and correlation coefficient of different anthropometric measurements in relation to birth weight. Results: Analysis of data indicates that out of 1100 newborns, 55.64% were low birth weight. The percentage of newborns > 2500gm was 44.36. Overall average birth weight was 2348 ± 505gm. Out of 1100 newborns, 608 (55.27% were males and 492 (44.73% were females. Average birth weight for males was 2412

  11. An improved Q estimation approach: the weighted centroid frequency shift method

    Science.gov (United States)

    Li, Jingnan; Wang, Shangxu; Yang, Dengfeng; Dong, Chunhui; Tao, Yonghui; Zhou, Yatao

    2016-06-01

    Seismic wave propagation in subsurface media suffers from absorption, which can be quantified by the quality factor Q. Accurate estimation of the Q factor is of great importance for the resolution enhancement of seismic data, precise imaging and interpretation, and reservoir prediction and characterization. The centroid frequency shift method (CFS) is currently one of the most commonly used Q estimation methods. However, for seismic data that contain noise, the accuracy and stability of Q extracted using CFS depend on the choice of frequency band. In order to reduce the influence of frequency band choices and obtain Q with greater precision and robustness, we present an improved CFS Q measurement approach—the weighted CFS method (WCFS), which incorporates a Gaussian weighting coefficient into the calculation procedure of the conventional CFS. The basic idea is to enhance the proportion of advantageous frequencies in the amplitude spectrum and reduce the weight of disadvantageous frequencies. In this novel method, we first construct a Gauss function using the centroid frequency and variance of the reference wavelet. Then we employ it as the weighting coefficient for the amplitude spectrum of the original signal. Finally, the conventional CFS is adopted for the weighted amplitude spectrum to extract the Q factor. Numerical tests of noise-free synthetic data demonstrate that the WCFS is feasible and efficient, and produces more accurate results than the conventional CFS. Tests for noisy synthetic data indicate that the new method has better anti-noise capability than the CFS. The application to field vertical seismic profile (VSP) data further demonstrates its validity5.

  12. Comparison of Four Weighting Methods in Fuzzy-based Land Suitability to Predict Wheat Yield

    Directory of Open Access Journals (Sweden)

    Fatemeh Rahmati

    2017-06-01

    Full Text Available Introduction: Land suitability evaluation is a process to examine the degree of land fitness for specific utilization and also makes it possible to estimate land productivity potential. In 1976, FAO provided a general framework for land suitability classification. It has not been proposed a specific method to perform this classification in the framework. In later years, a collection of methods was presented based on the FAO framework. In parametric method, different land suitability aspects are defined as completely discrete groups and are separated from each other by distinguished and consistent ranges. Therefore, land units that have moderate suitability can only choose one of the characteristics of predefined classes of land suitability. Fuzzy logic is an extension of Boolean logic by LotfiZadeh in 1965 based on the mathematical theory of fuzzy sets, which is a generalization of the classical set theory. By introducing the notion of degree in the verification of a condition, fuzzy method enables a condition to be in a state other than true or false, as well as provides a very valuable flexibility for reasoning, which makes it possible to take into account inaccuracies and uncertainties. One advantage of fuzzy logic in order to formalize human reasoning is that the rules are set in natural language. In evaluation method based on fuzzy logic, the weights are used for land characteristics. The objective of this study was to compare four methods of weight calculation in the fuzzy logic to predict the yield of wheat in the study area covering 1500 ha in Kian town in Shahrekord (Chahrmahal and Bakhtiari province, Iran. Materials and Methods: In such investigations, climatic factors, and soil physical and chemical characteristics are studied. This investigation involves several studies including a lab study, and qualitative and quantitative land suitability evaluation with fuzzy logic for wheat. Factors affecting the wheat production consist of

  13. Application of iterative method with dynamic weight based on observation equation's constant in NPP's surveying

    International Nuclear Information System (INIS)

    Chen Benfu; Guo Xianchun; Zou Zili

    2009-01-01

    It' s useful to identify the data with errors from the large number of observations during the process of adjustment to decrease the influence of the errors and to improve the quality of the final surveying result. Based on practical conditions of the nuclear power plant's plain control network, it has been given on how to simply calculate the threshold value which used to pre-weight each datum before adjustment calculation; it shows some superiorities in efficiency on data snooping and in quality of the final calculation compared with some traditional methods such as robust estimation, which process data with dynamic weight based the observation' s correction after each iteration. (authors)

  14. Flux weighted method for solution of stiff neutron dynamic equations and its application

    International Nuclear Information System (INIS)

    Li Huiyun; Jiao Huixian

    1987-12-01

    To analyze reactivity event for nuclear power plants, it is necessary to solve the neutron dynamic equations, which is a group of typical stiff constant differential equations. Very small time steps could only be adopted when the group of equations is solved by common methods. However, a large time steps might be selected if the Flux Weighted Medthod introduced in this paper is used. Generally, weighted factor θ i1 is set as a constant. Naturally, this treatment method can decrease the accuracy of calculation for the increase of the steadiness of solving the equations. An accurate theoretical formula of 4 x 4 matrix of θ i1 is rigorously derived so that the accuracy of calculation is ensured, as well as the steadiness of solved equations is increased. This method have the advantage over classical Runge-kutta Method and other methods. The time steps could be increased by a factor of 1 ∼ 3 orders of magnitude so as to save a lot of computating time. The programe solving neutron dynamic equation, which is prepared by using Flux Weighted Method, could be sued for real time analog of training simulator, as well as for analysis and computation of reactivity event (including rod jumping out event)

  15. The application of entropy weight TOPSIS method to optimal points in monitoring the Xinjiang radiation environment

    International Nuclear Information System (INIS)

    Feng Guangwen; Hu Youhua; Liu Qian

    2009-01-01

    In this paper, the application of the entropy weight TOPSIS method to optimal layout points in monitoring the Xinjiang radiation environment has been indroduced. With the help of SAS software, It has been found that the method is more ideal and feasible. The method can provide a reference for us to monitor radiation environment in the same regions further. As the method could bring great convenience and greatly reduce the inspecting work, it is very simple, flexible and effective for a comprehensive evaluation. (authors)

  16. IMPLEMENTATION OF SIMPLE ADDITIVE WEIGHTING (SAW METHODE IN DETERMINING HIGH SCHOOL STUDENT’S INTEREST

    Directory of Open Access Journals (Sweden)

    Prind Triajeng Pungkasanti

    2017-09-01

    Full Text Available The Ministry of Research, Technology, and Higher Education of Republic of Indonesia has set a regulation about curriculum applied in education field named Kurikulum 2013. One of the subsections in the Kurikulum 2013 regulates all requirements of majoring in high school. High school students determine their major based on Kurrikulum 2013 as they are on the 10th grade. The purpose of the majoring in education is to allow children development based on their skills and interests, because before, majoring have been done based on scores obtained. The main problem is the majoring requirements considered are admission test score and Junior High School National Test score. Both scores are not sufficient enough to determine the students major therefore academic aptitude test score is required. In term of weighting, the school has not been imposed the weighting system so the scores obtained is the average of admission test score and national test score. Based on the issue above, a solution required to solve the issue using a method. Method used in this research is Simple Additive Weighting (SAW, wherein this methode is looking for the weighted sum of performance rate on every alternative of atributes. This research provides the information about which potential students is suitable to enter the science major and social major so this results can be used as consideration of school decisions.

  17. a Quadtree Organization Construction and Scheduling Method for Urban 3d Model Based on Weight

    Science.gov (United States)

    Yao, C.; Peng, G.; Song, Y.; Duan, M.

    2017-09-01

    The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weights according to certain rules, perform Quadtree construction and schedule rendering according to different rendering weights. Also proposed an algorithm for extracting bounding box extraction based on model drawing primitives to generate LOD model automatically. Using the algorithm proposed in this paper, developed a 3D urban planning&management software, the practice has showed the algorithm is efficient and feasible, the render frame rate of big scene and small scene are both stable at around 25 frames.

  18. A QUADTREE ORGANIZATION CONSTRUCTION AND SCHEDULING METHOD FOR URBAN 3D MODEL BASED ON WEIGHT

    Directory of Open Access Journals (Sweden)

    C. Yao

    2017-09-01

    Full Text Available The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weights according to certain rules, perform Quadtree construction and schedule rendering according to different rendering weights. Also proposed an algorithm for extracting bounding box extraction based on model drawing primitives to generate LOD model automatically. Using the algorithm proposed in this paper, developed a 3D urban planning&management software, the practice has showed the algorithm is efficient and feasible, the render frame rate of big scene and small scene are both stable at around 25 frames.

  19. A method of segment weight optimization for intensity modulated radiation therapy

    International Nuclear Information System (INIS)

    Pei Xi; Cao Ruifen; Jing Jia; Cheng Mengyun; Zheng Huaqing; Li Jia; Huang Shanqing; Li Gui; Song Gang; Wang Weihua; Wu Yican; FDS Team

    2011-01-01

    The error caused by leaf sequencing often leads to planning of Intensity-Modulated Radiation Therapy (IMRT) arrange system couldn't meet clinical demand. The optimization approach in this paper can reduce this error and improve efficiency of plan-making effectively. Conjugate Gradient algorithm was used to optimize segment weight and readjust segment shape, which could minimize the error anterior-posterior leaf sequencing eventually. Frequent clinical cases were tasted by precise radiotherapy system, and then compared Dose-Volume histogram between target area and organ at risk as well as isodose line in computed tomography (CT) film, we found that the effect was improved significantly after optimizing segment weight. Segment weight optimizing approach based on Conjugate Gradient method can make treatment planning meet clinical request more efficiently, so that has extensive application perspective. (authors)

  20. A novel orthoimage mosaic method using the weighted A* algorithm for UAV imagery

    Science.gov (United States)

    Zheng, Maoteng; Zhou, Shunping; Xiong, Xiaodong; Zhu, Junfeng

    2017-12-01

    A weighted A* algorithm is proposed to select optimal seam-lines in orthoimage mosaic for UAV (Unmanned Aircraft Vehicle) imagery. The whole workflow includes four steps: the initial seam-line network is firstly generated by standard Voronoi Diagram algorithm; an edge diagram is then detected based on DSM (Digital Surface Model) data; the vertices (conjunction nodes) of initial network are relocated since some of them are on the high objects (buildings, trees and other artificial structures); and, the initial seam-lines are finally refined using the weighted A* algorithm based on the edge diagram and the relocated vertices. The method was tested with two real UAV datasets. Preliminary results show that the proposed method produces acceptable mosaic images in both the urban and mountainous areas, and is better than the result of the state-of-the-art methods on the datasets.

  1. WASTK: A Weighted Abstract Syntax Tree Kernel Method for Source Code Plagiarism Detection

    Directory of Open Access Journals (Sweden)

    Deqiang Fu

    2017-01-01

    Full Text Available In this paper, we introduce a source code plagiarism detection method, named WASTK (Weighted Abstract Syntax Tree Kernel, for computer science education. Different from other plagiarism detection methods, WASTK takes some aspects other than the similarity between programs into account. WASTK firstly transfers the source code of a program to an abstract syntax tree and then gets the similarity by calculating the tree kernel of two abstract syntax trees. To avoid misjudgment caused by trivial code snippets or frameworks given by instructors, an idea similar to TF-IDF (Term Frequency-Inverse Document Frequency in the field of information retrieval is applied. Each node in an abstract syntax tree is assigned a weight by TF-IDF. WASTK is evaluated on different datasets and, as a result, performs much better than other popular methods like Sim and JPlag.

  2. An age estimation method using brain local features for T1-weighted images.

    Science.gov (United States)

    Kondo, Chihiro; Ito, Koichi; Kai Wu; Sato, Kazunori; Taki, Yasuyuki; Fukuda, Hiroshi; Aoki, Takafumi

    2015-08-01

    Previous statistical analysis studies using large-scale brain magnetic resonance (MR) image databases have examined that brain tissues have age-related morphological changes. This fact indicates that one can estimate the age of a subject from his/her brain MR image by evaluating morphological changes with healthy aging. This paper proposes an age estimation method using local features extracted from T1-weighted MR images. The brain local features are defined by volumes of brain tissues parcellated into local regions defined by the automated anatomical labeling atlas. The proposed method selects optimal local regions to improve the performance of age estimation. We evaluate performance of the proposed method using 1,146 T1-weighted images from a Japanese MR image database. We also discuss the medical implication of selected optimal local regions.

  3. The weighted-sum-of-gray-gases model for arbitrary solution methods in radiative transfer

    International Nuclear Information System (INIS)

    Modest, M.F.

    1991-01-01

    In this paper the weighted-sum-of-gray-gases approach for radiative transfer in non-gray participating media, first developed by Hottel in the context of the zonal method, has been shown to be applicable to the general radiative equation of transfer. Within the limits of the weighted-sum-of-gray-gases model (non-scattering media within a black-walled enclosure) any non-gray radiation problem can be solved by any desired solution method after replacing the medium by an equivalent small number of gray media with constant absorption coefficients. Some examples are presented for isothermal media and media at radiative equilibrium, using the exact integral equations as well as the popular P-1 approximation of the equivalent gray media solution. The results demonstrate the equivalency of the method with the quadrature of spectral results, as well as the tremendous computer times savings (by a minimum of 95%) which are achieved

  4. Identification of influential spreaders in online social networks using interaction weighted K-core decomposition method

    Science.gov (United States)

    Al-garadi, Mohammed Ali; Varathan, Kasturi Dewi; Ravana, Sri Devi

    2017-02-01

    Online social networks (OSNs) have become a vital part of everyday living. OSNs provide researchers and scientists with unique prospects to comprehend individuals on a scale and to analyze human behavioral patterns. Influential spreaders identification is an important subject in understanding the dynamics of information diffusion in OSNs. Targeting these influential spreaders is significant in planning the techniques for accelerating the propagation of information that is useful for various applications, such as viral marketing applications or blocking the diffusion of annoying information (spreading of viruses, rumors, online negative behaviors, and cyberbullying). Existing K-core decomposition methods consider links equally when calculating the influential spreaders for unweighted networks. Alternatively, the proposed link weights are based only on the degree of nodes. Thus, if a node is linked to high-degree nodes, then this node will receive high weight and is treated as an important node. Conversely, the degree of nodes in OSN context does not always provide accurate influence of users. In the present study, we improve the K-core method for OSNs by proposing a novel link-weighting method based on the interaction among users. The proposed method is based on the observation that the interaction of users is a significant factor in quantifying the spreading capability of user in OSNs. The tracking of diffusion links in the real spreading dynamics of information verifies the effectiveness of our proposed method for identifying influential spreaders in OSNs as compared with degree centrality, PageRank, and original K-core.

  5. Statistical noise with the weighted backprojection method for single photon emission computed tomography

    International Nuclear Information System (INIS)

    Murayama, Hideo; Tanaka, Eiichi; Toyama, Hinako.

    1985-01-01

    The weighted backprojection (WBP) method and the radial post-correction (RPC) method were compared with other several attenuation correction methods for single photon emission computed tomography by computer simulation. These methods are the pre-correction method with arithmetic means of opposing projections, the post-correction method with a correction matrix, and the inverse attenuated Randon transform method. Statistical mean square noise in a reconstructed image was formulated, and was displayed two-dimensionally for typical simulated phantoms. The noise image for the WBP method was dependent on several parameters, namely, size of an attenuating object, distribution of activity, the attenuation coefficient, and choise of the reconstruction index, k and position of the reconstruction origin. The noise image for the WBP method with k=0 was almost the same for the RPC method. It has been shown that position of the reconstruction origin has to be chosen appropriately in order to improve the noise properties of the reconstructed image for the WBP method as well as the RPC method. Comparision of the different attenuation correction methods accomplished by using both the reconstructed images and the statistical noise images with the same mathematical phantom and convolving function concluded that the WBP method and the RPC method were more amenable to any radioisotope distributions than the other methods, and had the advantage of flexibility to improve image noise of any local positions. (author)

  6. About One Approach to Determine the Weights of the State Space Method

    Directory of Open Access Journals (Sweden)

    I. K. Romanova

    2015-01-01

    Full Text Available The article studies methods of determining weight coefficients, also called coefficients of criteria importance in multiobjective optimization (MOO. It is assumed that these coefficients indicate a degree of individual criteria influence on the final selection (final or summary assessment: the more is coefficient, the greater is contribution of its corresponding criterion.Today in the framework of modern information systems to support decision making for various purposes a number of methods for determining relative importance of criteria has been developed. Among those methods we can distinguish a utility method, method of weighted power average; weighted median; method of matching clustered rankings, method of paired comparison of importance, etc.However, it should be noted that different techniques available for calculating weights does not eliminate the main problem of multicriteria optimization namely, the inconsistency of individual criteria. The basis for solving multicriteria problems is a fundamental principle of multi-criteria selection i.e. Edgeworth - Pareto principle.Despite a large number of methods to determine the weights, the task remains relevant not only for reasons of evaluations subjectivity, but also because of the mathematical aspects. Today, recognized is the fact that, for example, such a popular method as linear convolution of private criteria, essentially, represents one of the heuristic approaches and, applying it, you can have got not the best final choice. Carlin lemma reflects the limits of the method application.The aim of this work is to offer one of the methods to calculate the weights applied to the problem of dynamic system optimization, the quality of which is determined by the criterion of a special type, namely integral quadratic quality criterion. The main challenge relates to the method of state space, which in the literature also is called the method of analytical design of optimal controllers.Despite the

  7. A Study of a Load Cell Based High Speed Weighting Method for a Potato Sorter

    International Nuclear Information System (INIS)

    Yang, Jong Hoon

    2002-02-01

    Potatoes, together with tangerines, are one of the major agricultural products in Jeju, and the production account for more than 30 % of the domestic production. Recently some kinds of sorting machine for potatoes are available, but they are not extensively used because their performance is not satisfactory and/or they are very expensive. This paper presents a load cell based high speed weighting method for sorting the potatoes. This method is based on the fact that the linear momentum of a potato is proportional to the mass of it. To test the performance of the weighting system, we developed load cell based automatic sorting system for potatoes. The system does not adopt an additional mechanism for weighting the potato such as a cup conveyer. It uses normal flat conveyers themselves so that the cost for maintenance and establishment will be lower than other system. Through sets of experiments, the developed weighting system was proved to be very reliable, and its performance is good enough to use as a practical sorting system

  8. Learning to Recommend Point-of-Interest with the Weighted Bayesian Personalized Ranking Method in LBSNs

    Directory of Open Access Journals (Sweden)

    Lei Guo

    2017-02-01

    Full Text Available Point-of-interest (POI recommendation has been well studied in recent years. However, most of the existing methods focus on the recommendation scenarios where users can provide explicit feedback. In most cases, however, the feedback is not explicit, but implicit. For example, we can only get a user’s check-in behaviors from the history of what POIs she/he has visited, but never know how much she/he likes and why she/he does not like them. Recently, some researchers have noticed this problem and began to learn the user preferences from the partial order of POIs. However, these works give equal weight to each POI pair and cannot distinguish the contributions from different POI pairs. Intuitively, for the two POIs in a POI pair, the larger the frequency difference of being visited and the farther the geographical distance between them, the higher the contribution of this POI pair to the ranking function. Based on the above observations, we propose a weighted ranking method for POI recommendation. Specifically, we first introduce a Bayesian personalized ranking criterion designed for implicit feedback to POI recommendation. To fully utilize the partial order of POIs, we then treat the cost function in a weighted way, that is give each POI pair a different weight according to their frequency of being visited and the geographical distance between them. Data analysis and experimental results on two real-world datasets demonstrate the existence of user preference on different POI pairs and the effectiveness of our weighted ranking method.

  9. Inverse probability weighting in STI/HIV prevention research: methods for evaluating social and community interventions

    Science.gov (United States)

    Lippman, Sheri A.; Shade, Starley B.; Hubbard, Alan E.

    2011-01-01

    Background Intervention effects estimated from non-randomized intervention studies are plagued by biases, yet social or structural intervention studies are rarely randomized. There are underutilized statistical methods available to mitigate biases due to self-selection, missing data, and confounding in longitudinal, observational data permitting estimation of causal effects. We demonstrate the use of Inverse Probability Weighting (IPW) to evaluate the effect of participating in a combined clinical and social STI/HIV prevention intervention on reduction of incident chlamydia and gonorrhea infections among sex workers in Brazil. Methods We demonstrate the step-by-step use of IPW, including presentation of the theoretical background, data set up, model selection for weighting, application of weights, estimation of effects using varied modeling procedures, and discussion of assumptions for use of IPW. Results 420 sex workers contributed data on 840 incident chlamydia and gonorrhea infections. Participators were compared to non-participators following application of inverse probability weights to correct for differences in covariate patterns between exposed and unexposed participants and between those who remained in the intervention and those who were lost-to-follow-up. Estimators using four model selection procedures provided estimates of intervention effect between odds ratio (OR) .43 (95% CI:.22-.85) and .53 (95% CI:.26-1.1). Conclusions After correcting for selection bias, loss-to-follow-up, and confounding, our analysis suggests a protective effect of participating in the Encontros intervention. Evaluations of behavioral, social, and multi-level interventions to prevent STI can benefit by introduction of weighting methods such as IPW. PMID:20375927

  10. Imaging method of brain surface anatomy structures using conventional T2-weighted MR images

    International Nuclear Information System (INIS)

    Hatanaka, Masahiko; Machida, Yoshio; Yoshida, Tadatoki; Katada, Kazuhiro.

    1992-01-01

    As a non-invasive technique for visualizing the brain surface structure by MRI, surface anatomy scanning (SAS) and the multislice SAS methods have been developed. Both techniques require additional MRI scanning to obtain images for the brain surface. In this paper, we report an alternative method to obtain the brain surface image using conventional T2-weighted multislice images without any additional scanning. The power calculation of the image pixel values, which is incorporated in the routine processing, has been applied in order to enhance the cerebrospinal fluid (CSF) contrast. We think that this method is one of practical approaches for imaging the surface anatomy of the brain. (author)

  11. THE EFFECT OF KANGAROO METHOD APPLICATION TO BODY TEMPERATURE OF BABY WITH LOW BIRTH WEIGHT (LBW)

    OpenAIRE

    Kadek Ayu Erika, Kadek Ayu Erika

    2012-01-01

    - Background: Low Birth Weight (LBW) care in Indonesia is still prioritizing the use of incubators but its presence is still very limited. Kangaroo method is now starting to be used as an alternative to incubator that is economically efficient and effective. Purpose: This study aimed to determine the effect of the application of the kangaroo method to body temperature of baby with LBW. Method: This research was conducted at the Hospital Prof. DR. W.Z. Johannes Kupang with a sample of 25 lo...

  12. Geographically weighted regression based methods for merging satellite and gauge precipitation

    Science.gov (United States)

    Chao, Lijun; Zhang, Ke; Li, Zhijia; Zhu, Yuelong; Wang, Jingfeng; Yu, Zhongbo

    2018-03-01

    Real-time precipitation data with high spatiotemporal resolutions are crucial for accurate hydrological forecasting. To improve the spatial resolution and quality of satellite precipitation, a three-step satellite and gauge precipitation merging method was formulated in this study: (1) bilinear interpolation is first applied to downscale coarser satellite precipitation to a finer resolution (PS); (2) the (mixed) geographically weighted regression methods coupled with a weighting function are then used to estimate biases of PS as functions of gauge observations (PO) and PS; and (3) biases of PS are finally corrected to produce a merged precipitation product. Based on the above framework, eight algorithms, a combination of two geographically weighted regression methods and four weighting functions, are developed to merge CMORPH (CPC MORPHing technique) precipitation with station observations on a daily scale in the Ziwuhe Basin of China. The geographical variables (elevation, slope, aspect, surface roughness, and distance to the coastline) and a meteorological variable (wind speed) were used for merging precipitation to avoid the artificial spatial autocorrelation resulting from traditional interpolation methods. The results show that the combination of the MGWR and BI-square function (MGWR-BI) has the best performance (R = 0.863 and RMSE = 7.273 mm/day) among the eight algorithms. The MGWR-BI algorithm was then applied to produce hourly merged precipitation product. Compared to the original CMORPH product (R = 0.208 and RMSE = 1.208 mm/hr), the quality of the merged data is significantly higher (R = 0.724 and RMSE = 0.706 mm/hr). The developed merging method not only improves the spatial resolution and quality of the satellite product but also is easy to implement, which is valuable for hydrological modeling and other applications.

  13. A Mixed Methods Evaluation of a 12-Week Insurance-Sponsored Weight Management Program Incorporating Cognitive-Behavioral Counseling

    Science.gov (United States)

    Abildso, Christiaan; Zizzi, Sam; Gilleland, Diana; Thomas, James; Bonner, Daniel

    2010-01-01

    Physical activity is critical in healthy weight loss, yet there is still much to be learned about psychosocial mechanisms of physical activity behavior change in weight loss. A sequential mixed methods approach was used to assess the physical and psychosocial impact of a 12-week cognitive-behavioral weight management program and explore factors…

  14. A QUADTREE ORGANIZATION CONSTRUCTION AND SCHEDULING METHOD FOR URBAN 3D MODEL BASED ON WEIGHT

    OpenAIRE

    C. Yao; G. Peng; Y. Song; M. Duan

    2017-01-01

    The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weigh...

  15. Height and Breast Cancer Risk

    DEFF Research Database (Denmark)

    Zhang, Ben; Shu, Xiao-Ou; Delahanty, Ryan J

    2015-01-01

    BACKGROUND: Epidemiological studies have linked adult height with breast cancer risk in women. However, the magnitude of the association, particularly by subtypes of breast cancer, has not been established. Furthermore, the mechanisms of the association remain unclear. METHODS: We performed a meta......-analysis to investigate associations between height and breast cancer risk using data from 159 prospective cohorts totaling 5216302 women, including 113178 events. In a consortium with individual-level data from 46325 case patients and 42482 control patients, we conducted a Mendelian randomization analysis using...... a genetic score that comprised 168 height-associated variants as an instrument. This association was further evaluated in a second consortium using summary statistics data from 16003 case patients and 41335 control patients. RESULTS: The pooled relative risk of breast cancer was 1.17 (95% confidence...

  16. Analysis of inconsistent source sampling in monte carlo weight-window variance reduction methods

    Directory of Open Access Journals (Sweden)

    David P. Griesheimer

    2017-09-01

    Full Text Available The application of Monte Carlo (MC to large-scale fixed-source problems has recently become possible with new hybrid methods that automate generation of parameters for variance reduction techniques. Two common variance reduction techniques, weight windows and source biasing, have been automated and popularized by the consistent adjoint-driven importance sampling (CADIS method. This method uses the adjoint solution from an inexpensive deterministic calculation to define a consistent set of weight windows and source particles for a subsequent MC calculation. One of the motivations for source consistency is to avoid the splitting or rouletting of particles at birth, which requires computational resources. However, it is not always possible or desirable to implement such consistency, which results in inconsistent source biasing. This paper develops an original framework that mathematically expresses the coupling of the weight window and source biasing techniques, allowing the authors to explore the impact of inconsistent source sampling on the variance of MC results. A numerical experiment supports this new framework and suggests that certain classes of problems may be relatively insensitive to inconsistent source sampling schemes with moderate levels of splitting and rouletting.

  17. Spatiotemporal Monte Carlo transport methods in x-ray semiconductor detectors: application to pulse-height spectroscopy in a-Se.

    Science.gov (United States)

    Fang, Yuan; Badal, Andreu; Allec, Nicholas; Karim, Karim S; Badano, Aldo

    2012-01-01

    The authors describe a detailed Monte Carlo (MC) method for the coupled transport of ionizing particles and charge carriers in amorphous selenium (a-Se) semiconductor x-ray detectors, and model the effect of statistical variations on the detected signal. A detailed transport code was developed for modeling the signal formation process in semiconductor x-ray detectors. The charge transport routines include three-dimensional spatial and temporal models of electron-hole pair transport taking into account recombination and trapping. Many electron-hole pairs are created simultaneously in bursts from energy deposition events. Carrier transport processes include drift due to external field and Coulombic interactions, and diffusion due to Brownian motion. Pulse-height spectra (PHS) have been simulated with different transport conditions for a range of monoenergetic incident x-ray energies and mammography radiation beam qualities. Two methods for calculating Swank factors from simulated PHS are shown, one using the entire PHS distribution, and the other using the photopeak. The latter ignores contributions from Compton scattering and K-fluorescence. Comparisons differ by approximately 2% between experimental measurements and simulations. The a-Se x-ray detector PHS responses simulated in this work include three-dimensional spatial and temporal transport of electron-hole pairs. These PHS were used to calculate the Swank factor and compare it with experimental measurements. The Swank factor was shown to be a function of x-ray energy and applied electric field. Trapping and recombination models are all shown to affect the Swank factor.

  18. Do-it-yourself networks: a novel method of generating weighted networks.

    Science.gov (United States)

    Shanafelt, D W; Salau, K R; Baggio, J A

    2017-11-01

    Network theory is finding applications in the life and social sciences for ecology, epidemiology, finance and social-ecological systems. While there are methods to generate specific types of networks, the broad literature is focused on generating unweighted networks. In this paper, we present a framework for generating weighted networks that satisfy user-defined criteria. Each criterion hierarchically defines a feature of the network and, in doing so, complements existing algorithms in the literature. We use a general example of ecological species dispersal to illustrate the method and provide open-source code for academic purposes.

  19. In defense of the classical height system

    Science.gov (United States)

    Foroughi, Ismael; Vaníček, Petr; Sheng, Michael; Kingdon, Robert William; Santos, Marcelo C.

    2017-11-01

    leveling points range between - 9.5 and 0 cm, differences between Helmert's and the rigorous orthometric heights vary between - 3.6 and 1.1 cm. The local gravimetric geoid model of Auvergne, computed by the Stokes-Helmert technique, is used here to illustrate the accuracy of the classical height system. Results show a very reasonable standard deviation (STD) of 3.2 cm of the differences between geoid values, derived from control leveling points, and gravimetric geoid heights when Helmert's heights are employed and even a smaller STD of 2.9 cm when rigorous orthometric heights are used. A corresponding comparison of a quasi-geoid model, computed by Least-Squares Modification of Stokes method, with normal heights show an STD of 3.4 cm.

  20. Wheelchair pushrim kinetics measurement: A method to cancel inaccuracies due to pushrim weight and wheel camber.

    Science.gov (United States)

    Chénier, Félix; Aissaoui, Rachid; Gauthier, Cindy; Gagnon, Dany H

    2017-02-01

    The commercially available SmartWheel TM is largely used in research and increasingly used in clinical practice to measure the forces and moments applied on the wheelchair pushrims by the user. However, in some situations (i.e. cambered wheels or increased pushrim weight), the recorded kinetics may include dynamic offsets that affect the accuracy of the measurements. In this work, an automatic method to identify and cancel these offsets is proposed and tested. First, the method was tested on an experimental bench with different cambers and pushrim weights. Then, the method was generalized to wheelchair propulsion. Nine experienced wheelchair users propelled their own wheelchairs instrumented with two SmartWheels with anti-slip pushrim covers. The dynamic offsets were correctly identified using the propulsion acquisition, without needing a separate baseline acquisition. A kinetic analysis was performed with and without dynamic offset cancellation using the proposed method. The most altered kinetic variables during propulsion were the vertical and total forces, with errors of up to 9N (p<0.001, large effect size of 5). This method is simple to implement, fully automatic and requires no further acquisitions. Therefore, we advise to use it systematically to enhance the accuracy of existing and future kinetic measurements. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

  1. A Combined Weighting Method Based on Hybrid of Interval Evidence Fusion and Random Sampling

    Directory of Open Access Journals (Sweden)

    Ying Yan

    2017-01-01

    Full Text Available Due to the complexity of system and lack of expertise, epistemic uncertainties may present in the experts’ judgment on the importance of certain indices during group decision-making. A novel combination weighting method is proposed to solve the index weighting problem when various uncertainties are present in expert comments. Based on the idea of evidence theory, various types of uncertain evaluation information are uniformly expressed through interval evidence structures. Similarity matrix between interval evidences is constructed, and expert’s information is fused. Comment grades are quantified using the interval number, and cumulative probability function for evaluating the importance of indices is constructed based on the fused information. Finally, index weights are obtained by Monte Carlo random sampling. The method can process expert’s information with varying degrees of uncertainties, which possesses good compatibility. Difficulty in effectively fusing high-conflict group decision-making information and large information loss after fusion is avertible. Original expert judgments are retained rather objectively throughout the processing procedure. Cumulative probability function constructing and random sampling processes do not require any human intervention or judgment. It can be implemented by computer programs easily, thus having an apparent advantage in evaluation practices of fairly huge index systems.

  2. A method for quantifying intervertebral disc signal intensity on T2-weighted imaging

    International Nuclear Information System (INIS)

    Nagashima, Masaki; Abe, Hitoshi; Amaya, Kenji; Matsumoto, Hideo; Yanaihara, Hisashi; Nishiwaki, Yuji; Toyama, Yoshiaki; Matsumoto, Morio

    2012-01-01

    Background Quantification of intervertebral disc degeneration based on intensity of the nucleus pulposus in magnetic resonance imaging (MRI) often uses the mean intensity of the region of interest (ROI) within the nucleus pulposus. However, the location and size of ROI have varied in different reports, and none of the reported methods can be considered fully objective. Purpose To develop a more objective method of establishing ROIs for quantitative evaluation of signal intensity in the nucleus pulposus using T2-weighted MRI. Material and Methods A 1.5-T scanner was used to obtain T2-weighted mid-sagittal images. A total of 288 intervertebral discs from 48 patients (25 men, 23 women) were analyzed. Mean age was 47.4 years (range, 17-69 years). All discs were classified into five grades according to Pfirrmann et al. Discs in grades I and II were defined as bright discs, and discs in grades IV and V were defined as dark discs. Eight candidate methods of ROI determination were devised. The method offering the highest degree of discrimination between bright and dark discs was investigated among these eight methods. Results The method with the greatest degree of discrimination was as follows. The quadrangle formed by anterior and posterior edges of the upper and lower end plates in contact with the intervertebral disc to be measured was defined as the intervertebral area. A shape similar to the intervertebral area but with one-quarter the area was drawn. The geometrical center of the shape was matched to the center of intensity, and this shape was then used as the ROI. Satisfactory validity and reproducibility were obtained using this method. Conclusion The present method offers adequate discrimination and could be useful for longitudinal tracking of intervertebral disc degeneration with sufficient reproducibility

  3. A method for quantifying intervertebral disc signal intensity on T2-weighted imaging

    Energy Technology Data Exchange (ETDEWEB)

    Nagashima, Masaki [Dept. of Orthopaedic Surgery, Keio Univ. School of Medicine, Tokyo (Japan); Dept. of Orthopaedic Surgery, Kitasato Univ. Kitasato Inst. Hospital, Tokyo (Japan); Abe, Hitoshi [Dept. of Orthopaedic Surgery, Kitasato Univ. Kitasato Inst. Hospital, Tokyo (Japan)], E-mail: hit-abe@insti.kitasato-u.ac.jp; Amaya, Kenji [Graduate School of Information Science and Engineering, Tokyo Inst. of Technology, Tokyo (Japan); Matsumoto, Hideo [Inst. for Integrated Sports Medicine, Keio Univ. School of Medicine, Tokyo (Japan); Yanaihara, Hisashi [Dept. of Diagnostic Radiology, Kitasato Univ. Kitasato Inst. Hospital, Tokyo (Japan); Nishiwaki, Yuji [Dept. of Environmental and Occupational Health, Toho Univ. School of Medicine, Tokyo (Japan); Toyama, Yoshiaki; Matsumoto, Morio [Dept. of Orthopaedic Surgery, Keio Univ. School of Medicine, Tokyo (Japan)

    2012-11-15

    Background Quantification of intervertebral disc degeneration based on intensity of the nucleus pulposus in magnetic resonance imaging (MRI) often uses the mean intensity of the region of interest (ROI) within the nucleus pulposus. However, the location and size of ROI have varied in different reports, and none of the reported methods can be considered fully objective. Purpose To develop a more objective method of establishing ROIs for quantitative evaluation of signal intensity in the nucleus pulposus using T2-weighted MRI. Material and Methods A 1.5-T scanner was used to obtain T2-weighted mid-sagittal images. A total of 288 intervertebral discs from 48 patients (25 men, 23 women) were analyzed. Mean age was 47.4 years (range, 17-69 years). All discs were classified into five grades according to Pfirrmann et al. Discs in grades I and II were defined as bright discs, and discs in grades IV and V were defined as dark discs. Eight candidate methods of ROI determination were devised. The method offering the highest degree of discrimination between bright and dark discs was investigated among these eight methods. Results The method with the greatest degree of discrimination was as follows. The quadrangle formed by anterior and posterior edges of the upper and lower end plates in contact with the intervertebral disc to be measured was defined as the intervertebral area. A shape similar to the intervertebral area but with one-quarter the area was drawn. The geometrical center of the shape was matched to the center of intensity, and this shape was then used as the ROI. Satisfactory validity and reproducibility were obtained using this method. Conclusion The present method offers adequate discrimination and could be useful for longitudinal tracking of intervertebral disc degeneration with sufficient reproducibility.

  4. A Novel Transfer Learning Method Based on Common Space Mapping and Weighted Domain Matching

    KAUST Repository

    Liang, Ru-Ze; Xie, Wei; Li, Weizhi; Wang, Hongqi; Wang, Jim Jing-Yan; Taylor, Lisa

    2017-01-01

    In this paper, we propose a novel learning framework for the problem of domain transfer learning. We map the data of two domains to one single common space, and learn a classifier in this common space. Then we adapt the common classifier to the two domains by adding two adaptive functions to it respectively. In the common space, the target domain data points are weighted and matched to the target domain in term of distributions. The weighting terms of source domain data points and the target domain classification responses are also regularized by the local reconstruction coefficients. The novel transfer learning framework is evaluated over some benchmark cross-domain data sets, and it outperforms the existing state-of-the-art transfer learning methods.

  5. A Novel Transfer Learning Method Based on Common Space Mapping and Weighted Domain Matching

    KAUST Repository

    Liang, Ru-Ze

    2017-01-17

    In this paper, we propose a novel learning framework for the problem of domain transfer learning. We map the data of two domains to one single common space, and learn a classifier in this common space. Then we adapt the common classifier to the two domains by adding two adaptive functions to it respectively. In the common space, the target domain data points are weighted and matched to the target domain in term of distributions. The weighting terms of source domain data points and the target domain classification responses are also regularized by the local reconstruction coefficients. The novel transfer learning framework is evaluated over some benchmark cross-domain data sets, and it outperforms the existing state-of-the-art transfer learning methods.

  6. Use of a dynamic grid adaptation in the asymmetric weighted residual method

    International Nuclear Information System (INIS)

    Graf, V.; Romstedt, P.; Werner, W.

    1986-01-01

    A dynamic grid adaptive method has been developed for use with the asymmetric weighted residual method. The method automatically adapts the number and position of the spatial mesh points as the solution of hyperbolic or parabolic vector partial differential equations progresses in time. The mesh selection algorithm is based on the minimization of the L 2 norm of the spatial discretization error. The method permits the accurate calculation of the evolution of inhomogeneities, like wave fronts, shock layers, and other sharp transitions, while generally using a coarse computational grid. The number of required mesh points is significantly reduced, relative to a fixed Eulerian grid. Since the mesh selection algorithm is computationally inexpensive, a corresponding reduction of computing time results

  7. Concerning an application of the method of least squares with a variable weight matrix

    Science.gov (United States)

    Sukhanov, A. A.

    1979-01-01

    An estimate of a state vector for a physical system when the weight matrix in the method of least squares is a function of this vector is considered. An iterative procedure is proposed for calculating the desired estimate. Conditions for the existence and uniqueness of the limit of this procedure are obtained, and a domain is found which contains the limit estimate. A second method for calculating the desired estimate which reduces to the solution of a system of algebraic equations is proposed. The question of applying Newton's method of tangents to solving the given system of algebraic equations is considered and conditions for the convergence of the modified Newton's method are obtained. Certain properties of the estimate obtained are presented together with an example.

  8. Improving Allergen Prediction in Main Crops Using a Weighted Integrative Method.

    Science.gov (United States)

    Li, Jing; Wang, Jing; Li, Jing

    2017-12-01

    As a public health problem, food allergy is frequently caused by food allergy proteins, which trigger a type-I hypersensitivity reaction in the immune system of atopic individuals. The food allergens in our daily lives are mainly from crops including rice, wheat, soybean and maize. However, allergens in these main crops are far from fully uncovered. Although some bioinformatics tools or methods predicting the potential allergenicity of proteins have been proposed, each method has their limitation. In this paper, we built a novel algorithm PREAL W , which integrated PREAL, FAO/WHO criteria and motif-based method by a weighted average score, to benefit the advantages of different methods. Our results illustrated PREAL W has better performance significantly in the crops' allergen prediction. This integrative allergen prediction algorithm could be useful for critical food safety matters. The PREAL W could be accessed at http://lilab.life.sjtu.edu.cn:8080/prealw .

  9. Sri Lanka, Colored Height

    Science.gov (United States)

    2005-01-01

    The topography of the island nation of Sri Lanka is well shown in this color-coded shaded relief map generated with digital elevation data from the Shuttle Radar Topography Mission (SRTM). Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. For this special view heights below 10 meters (33 feet) above sea level have been colored red. These low coastal elevations extend 5 to 10 km (3.1 to 6.2 mi) inland on Sri Lanka and are especially vulnerable to flooding associated with storm surges, rising sea level, or, as in the aftermath of the earthquake of December 26, 2004, tsunami. These so-called tidal waves have occurred numerous times in history and can be especially destructive, but with the advent of the near-global SRTM elevation data planners can better predict which areas are in the most danger and help develop mitigation plans in the event of particular flood events. Sri Lanka is shaped like a giant teardrop falling from the southern tip of the vast Indian subcontinent. It is separated from India by the 50km (31mi) wide Palk Strait, although there is a series of stepping-stone coral islets known as Adam's Bridge that almost form a land bridge between the two countries. The island is just 350km (217mi) long and only 180km (112mi) wide at its broadest, and is about the same size as Ireland, West Virginia or Tasmania. The southern half of the island is dominated by beautiful and rugged hill country, and includes Mt Pidurutalagala, the islandaE(TM)s highest point at 2524 meters (8281 ft). The entire northern half comprises a large plain extending from the edge of the hill country to the

  10. A comparison of the weights-of-evidence method and probabilistic neural networks

    Science.gov (United States)

    Singer, Donald A.; Kouda, Ryoichi

    1999-01-01

    The need to integrate large quantities of digital geoscience information to classify locations as mineral deposits or nondeposits has been met by the weights-of-evidence method in many situations. Widespread selection of this method may be more the result of its ease of use and interpretation rather than comparisons with alternative methods. A comparison of the weights-of-evidence method to probabilistic neural networks is performed here with data from Chisel Lake-Andeson Lake, Manitoba, Canada. Each method is designed to estimate the probability of belonging to learned classes where the estimated probabilities are used to classify the unknowns. Using these data, significantly lower classification error rates were observed for the neural network, not only when test and training data were the same (0.02 versus 23%), but also when validation data, not used in any training, were used to test the efficiency of classification (0.7 versus 17%). Despite these data containing too few deposits, these tests of this set of data demonstrate the neural network's ability at making unbiased probability estimates and lower error rates when measured by number of polygons or by the area of land misclassified. For both methods, independent validation tests are required to ensure that estimates are representative of real-world results. Results from the weights-of-evidence method demonstrate a strong bias where most errors are barren areas misclassified as deposits. The weights-of-evidence method is based on Bayes rule, which requires independent variables in order to make unbiased estimates. The chi-square test for independence indicates no significant correlations among the variables in the Chisel Lake–Andeson Lake data. However, the expected number of deposits test clearly demonstrates that these data violate the independence assumption. Other, independent simulations with three variables show that using variables with correlations of 1.0 can double the expected number of deposits

  11. Physiological pattern of lumbar disc height

    International Nuclear Information System (INIS)

    Biggemann, M.; Frobin, W.; Brinckmann, P.

    1997-01-01

    Purpose of this study is to present a new method of quantifying objectively the height of all discs in lateral radiographs of the lumbar spine and of analysing the normal craniocaudal sequence pattern of lumbar disc heights. Methods: The new parameter is the ventrally measured disc height corrected for the dependence on the angle of lordosis by normalisation to mean angles observed in the erect posture of healthy persons. To eliminate radiographic magnification, the corrected ventral height is related to the mean depth of the cranially adjoining vertebra. In this manner lumbar disc heights were objectively measured in young, mature and healthy persons (146 males and 65 females). The craniocaudal sequence pattern was analysed by mean values from all persons and by height differences of adjoining discs in each individual lumbar spine. Results: Mean normative values demonstrated an increase in disc height between L1/L2 and L4/L5 and a constant or decreasing disc height between L4/L5 and L5/S1. However, this 'physiological sequence of disc height in the statistical mean' was observed in only 36% of normal males and 55% of normal females. Conclusion: The radiological pattern of the 'physiological sequence of lumbar disc height' leads to a relevant portion of false positive pathological results especially at L4/L5. An increase of disc height from L4/L5 to L5/S1 may be normal. The recognition of decreased disc height should be based on an abrupt change in the heights of adjoining discs and not on a deviation from a craniocaudal sequence pattern. (orig.) [de

  12. WMAXC: a weighted maximum clique method for identifying condition-specific sub-network.

    Directory of Open Access Journals (Sweden)

    Bayarbaatar Amgalan

    Full Text Available Sub-networks can expose complex patterns in an entire bio-molecular network by extracting interactions that depend on temporal or condition-specific contexts. When genes interact with each other during cellular processes, they may form differential co-expression patterns with other genes across different cell states. The identification of condition-specific sub-networks is of great importance in investigating how a living cell adapts to environmental changes. In this work, we propose the weighted MAXimum clique (WMAXC method to identify a condition-specific sub-network. WMAXC first proposes scoring functions that jointly measure condition-specific changes to both individual genes and gene-gene co-expressions. It then employs a weaker formula of a general maximum clique problem and relates the maximum scored clique of a weighted graph to the optimization of a quadratic objective function under sparsity constraints. We combine a continuous genetic algorithm and a projection procedure to obtain a single optimal sub-network that maximizes the objective function (scoring function over the standard simplex (sparsity constraints. We applied the WMAXC method to both simulated data and real data sets of ovarian and prostate cancer. Compared with previous methods, WMAXC selected a large fraction of cancer-related genes, which were enriched in cancer-related pathways. The results demonstrated that our method efficiently captured a subset of genes relevant under the investigated condition.

  13. Investigating Environmentally Sustainable Transport Based on DALY weights and SIR Method

    Directory of Open Access Journals (Sweden)

    Hossein Nezamianpour Jahromi

    2012-09-01

    Full Text Available Accessibility is one of the main causes of well-being and growth in contemporary societies. Transportation is the backbone of accessibility systems that lead to the growth of economic and social networks and spatial dispersion of activities. Unfortunately, the adverse effects of transportation have a great impact on the natural and human environment. Since transportation is associated with fossil fuel combustion, it results in emissions of pollutants that cause damage to human health. To save the global eco-system, sustainable development has become an international priority. To deal with the sustainability of transportation systems is an important issue as testified by a growing number of initiatives framed to define and measure sustainability in transportation planning and infrastructure planning as well. The capability of environmental assessment as a sustainability instrument is well known. This study proposes a new approach to rank countries based on environmental sustainability development applying disability adjusted life year (DALY weights for transportation sector emissions. DALY weights consider actual impacts of pollutants on human health. By employing SIR method, a superiority and inferiority ranking method is presented for multiple criteria decision making, the sustainability ranking of a number of European countries is presented. Three various ranking methods extracted from SIR ranking method are discussed and the results and the correlation among them are demonstrated.

  14. Method validation using weighted linear regression models for quantification of UV filters in water samples.

    Science.gov (United States)

    da Silva, Claudia Pereira; Emídio, Elissandro Soares; de Marchi, Mary Rosa Rodrigues

    2015-01-01

    This paper describes the validation of a method consisting of solid-phase extraction followed by gas chromatography-tandem mass spectrometry for the analysis of the ultraviolet (UV) filters benzophenone-3, ethylhexyl salicylate, ethylhexyl methoxycinnamate and octocrylene. The method validation criteria included evaluation of selectivity, analytical curve, trueness, precision, limits of detection and limits of quantification. The non-weighted linear regression model has traditionally been used for calibration, but it is not necessarily the optimal model in all cases. Because the assumption of homoscedasticity was not met for the analytical data in this work, a weighted least squares linear regression was used for the calibration method. The evaluated analytical parameters were satisfactory for the analytes and showed recoveries at four fortification levels between 62% and 107%, with relative standard deviations less than 14%. The detection limits ranged from 7.6 to 24.1 ng L(-1). The proposed method was used to determine the amount of UV filters in water samples from water treatment plants in Araraquara and Jau in São Paulo, Brazil. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. The comparative evaluation of patients′ body dry weight under hemodialysis using two methods: Bioelectrical impedance analysis and conventional method

    Directory of Open Access Journals (Sweden)

    Neda Alijanian

    2012-01-01

    Full Text Available Background: Dry weight (DW is an important concept related to patients undergoing hemodialysis. Conventional method seems to be time consuming and operator dependent. Bio impedance analysis (BIA is a new and simple method reported to be an accurate way for estimating DW. In this study, we aimed to compare the conventional estimation of DW with measuring DW by BIA. Materials and Methods: This study involved 130 uremic patients, performed in Isfahan, Iran. DW was calculated by both conventional (CDW and BIA (BIADW method and results were compared based on different grouping factors including sex, underlying cause of renal failure (RF (diabetic RF and non-diabetic RF, body mass index (BMI status, and sessions of hemodialysis. We also calculated the difference between DWs of 2 methods (DW diff = CDW-BIADW. Results: The mean of BIADW was significantly lower than CDW (57.20 ± 1.82 vs 59.36 ± 1.77, P value < 0.001. After grouping cases according to the underlying cause, BMI, sex, and dialysis sessions BIADW was significantly lower than CDW. Conclusion: Based on the combination of problems with CDW measurement which are corrected by BIA, and more clinical reliability of CDW, we concluded that although conventional method is a time-consuming and operator-dependent way to assess DW, DW could be estimated by combining both of these methods by finding the mathematic correlation between these methods.

  16. Biexponential analysis of diffusion-weighted imaging: comparison of three different calculation methods in transplanted kidneys.

    Science.gov (United States)

    Heusch, Philipp; Wittsack, Hans-Jörg; Pentang, Gael; Buchbender, Christian; Miese, Falk; Schek, Julia; Kröpil, Patric; Antoch, Gerald; Lanzman, Rotem S

    2013-12-01

    Biexponential analysis has been used increasingly to obtain contributions of both diffusion and microperfusion to the signal decay in diffusion-weighted imaging DWI of different parts of the body. To compare biexponential diffusion parameters of transplanted kidneys obtained with three different calculation methods. DWI was acquired in 15 renal allograft recipients (eight men, seven women; mean age, 52.4 ± 14.3 years) using a paracoronal EPI sequence with 16 b-values (b = 0-750 s/mm(2)) and six averages at 1.5T. No respiratory gating was used. Three different calculation methods were used for the calculation of biexponential diffusion parameters: Fp, ADCP, and ADCD were calculated without fixing any parameter a priori (calculation method 1); ADCP was fixed to 12.0 µm(2)/ms, whereas Fp and ADCD were calculated using the biexponential model (calculation method 2); multistep approach with monoexponential fitting of the high b-value portion (b ≥ 250 s/mm(2)) for determination of ADCD and assessment of the low b intercept for determination of Fp (calculation method 3). For quantitative analysis, ROI measurements were performed on the according parameter maps. Mean ADCD values of the renal cortex using calculation method 1 were significantly lower than using calculation methods 2 and 3 (P < 0.001). There was a significant correlation between calculation methods 1 and 2 (r = 0.69 (P < 0.005) and calculation methods 1 and 3 (r = 0.59; P < 0.05) as well as calculation methods 2 and 3 (r = 0.98; P < 0.001). Mean Fp values of the renal cortex were higher with calculation method 1 than with calculation methods 2 and 3 (P < 0.001). For Fp, only the correlation between calculation methods 2 and 3 was significant (r = 0.98; P < 0.001). Biexponential diffusion parameters differ significantly depending on the calculation methods used for their calculation.

  17. (Mis)interpretation of body weight in adult women and men.

    NARCIS (Netherlands)

    Steenhuis, I.H.M.; Bos, A.E.R.; Mayer, B.

    2006-01-01

    Introduction: This study examined what methods people use to determine and interpret their body weight, and what factors are associated with either an underestimation of overweight or an overestimation of a healthy body weight. Method: The study used self-reported data on weight and height. Data

  18. Primal Decomposition-Based Method for Weighted Sum-Rate Maximization in Downlink OFDMA Systems

    Directory of Open Access Journals (Sweden)

    Weeraddana Chathuranga

    2010-01-01

    Full Text Available We consider the weighted sum-rate maximization problem in downlink Orthogonal Frequency Division Multiple Access (OFDMA systems. Motivated by the increasing popularity of OFDMA in future wireless technologies, a low complexity suboptimal resource allocation algorithm is obtained for joint optimization of multiuser subcarrier assignment and power allocation. The algorithm is based on an approximated primal decomposition-based method, which is inspired from exact primal decomposition techniques. The original nonconvex optimization problem is divided into two subproblems which can be solved independently. Numerical results are provided to compare the performance of the proposed algorithm to Lagrange relaxation based suboptimal methods as well as to optimal exhaustive search-based method. Despite its reduced computational complexity, the proposed algorithm provides close-to-optimal performance.

  19. A Weighted Combination Method for Conflicting Evidence in Multi-Sensor Data Fusion

    Directory of Open Access Journals (Sweden)

    Fuyuan Xiao

    2018-05-01

    Full Text Available Dempster–Shafer evidence theory is widely applied in various fields related to information fusion. However, how to avoid the counter-intuitive results is an open issue when combining highly conflicting pieces of evidence. In order to handle such a problem, a weighted combination method for conflicting pieces of evidence in multi-sensor data fusion is proposed by considering both the interplay between the pieces of evidence and the impacts of the pieces of evidence themselves. First, the degree of credibility of the evidence is determined on the basis of the modified cosine similarity measure of basic probability assignment. Then, the degree of credibility of the evidence is adjusted by leveraging the belief entropy function to measure the information volume of the evidence. Finally, the final weight of each piece of evidence generated from the above steps is obtained and adopted to modify the bodies of evidence before using Dempster’s combination rule. A numerical example is provided to illustrate that the proposed method is reasonable and efficient in handling the conflicting pieces of evidence. In addition, applications in data classification and motor rotor fault diagnosis validate the practicability of the proposed method with better accuracy.

  20. Fuzzy Simple Additive Weighting Method in the Decision Making of Human Resource Recruitment

    Directory of Open Access Journals (Sweden)

    Budi Prasetiyo

    2016-12-01

    Full Text Available The Company is one of the jobs that was founded to reduce unemployment. The progress of a company is determined by the human resources that exist within the company. So, the selection of workers will join the company need to be selected first. The hardest thing in making a selection factor is the effort to eliminate the subjectivity of the personnel manager so that every choice made is objective based on the criteria expected by the company. To help determine who is accepted as an employee in the company, we need a method that can provide a valid decision. Therefore, we use Fuzzy Multiple Attribute Decision Making with Simple Additive Weighting method (SAW to decide to make in human resource recruitment. This method was chosen because it can provide the best alternative from several alternatives. In this case, the alternative is that the applicants or candidates. This research was conducted by finding the weight values for each attribute. Then do the ranking process that determines the optimal alternative to the best applicants who qualify as employees of the company. Based on calculations by the SAW obtained the two highest ranking results are A5 (alternative 5 and A1 (alternative 1, to obtain two candidates received.

  1. Parturient symphysio-fundal height and abdominal girth ...

    African Journals Online (AJOL)

    Birth weight is known to influence morbidity and mortality. Simple measures to predict birth weight before delivery would therefore be useful in order to plan a delivery. Maternal parturient symphysio-fundal height has been used to detect Low Birth Weight. This study aims at predicting the fetal weight using the maternal ...

  2. Standard test method for drop-weight tear tests of ferritic steels

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method covers drop-weight tear tests (DWTT) on ferritic steels with thicknesses between 3.18 and 19.1 mm. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. Estimating Neonatal Mortality Rates from the Heights of Children: The Case of American Slaves

    OpenAIRE

    Richard H. Steckel

    1985-01-01

    Underenumeration of vital events is a problem familiar topeople who work with historical demographic records. This paper proposes a method for recovering information about neonatal mortality.The approach utilizes average heights of young children to predict the birth weight of American slaves. The results suggest that slave newborns weighed on average about 5.1 pounds, which places them among the poorest populations of developing countries in the mid-twentieth century. The birth weight distri...

  4. Estado nutricional de crianças índias do Alto Xingu em 1980 e 1992 e evolução pondero-estatural entre o primeiro e o quarto anos de vida Nutritional status of indigenous children from the Alto Xingu in 1980 and 1992 and follow-up of weight and height from the first through the fourth years of life

    Directory of Open Access Journals (Sweden)

    Mauro Batista de Morais

    2003-04-01

    Full Text Available Os objetivos deste estudo realizado com a população infantil do Alto Xingu foram: (1 analisar a evolução do peso e da estatura entre o primeiro e o quarto anos de vida, (2 comparar o estado nutricional em 1980 e 1992. Avaliaram-se o peso e a estatura de: (1 81 crianças no primeiro e no quarto ano de vida; (2 264 crianças avaliadas em 1980 e de 172 em 1992 (idade This study focused on the under-five population of the Alto Xingu region in Brazil, with the following objectives: (1 to evaluate height and weight increment from the first through the fourth years of life and (2 to compare nutritional status in 1980 and 1992. Height and weight increases were evaluated in 81 children. Weight and height were measured in 264 children evaluated in 1980 and in 172 in 1992 (< 10 years of age. Median Z-scores in the first and fourth years of life, respectively, showed: (1 a decrease in weight-for-age, (-0.12 in the first year and -0.51 in the fourth year of life; p = 0.002; (2 a decrease in weight-for-height (+1.31 and +0.08; p < 0.001; (3 an increase in height-for-age (-1.50 and -0.94; p < 0.001. Median Z-scores in 1980 and 1992 showed: (1 no change in weight-for-age (-0.61 in 1980 and -0.62 in 1992; p = 0.90; (2 no change in weight-for-height (+0.27 and +0.34; p = 0.10; and (3 a decrease in height-for-age (-1.04 and -1.22; p = 0.02. Height-for-age increased and weight-for-height decreased between the first and fourth years of life. A decrease in height-for-age was observed from 1980 to 1992, demonstrating the importance of nutritional surveillance among the population of the Alto Xingu.

  5. Comparison of simple additive weighting (SAW) and composite performance index (CPI) methods in employee remuneration determination

    Science.gov (United States)

    Karlitasari, L.; Suhartini, D.; Benny

    2017-01-01

    The process of determining the employee remuneration for PT Sepatu Mas Idaman currently are still using Microsoft Excel-based spreadsheet where in the spreadsheet there is the value of criterias that must be calculated for every employee. This can give the effect of doubt during the assesment process, therefore resulting in the process to take much longer time. The process of employee remuneration determination is conducted by the assesment team based on some criterias that have been predetermined. The criteria used in the assessment process are namely the ability to work, human relations, job responsibility, discipline, creativity, work, achievement of targets, and absence. To ease the determination of employee remuneration to be more efficient and effective, the Simple Additive Weighting (SAW) method is used. SAW method can help in decision making for a certain case, and the calculation that generates the greatest value will be chosen as the best alternative. Other than SAW, also by using another method was the CPI method which is one of the calculating method in decision making based on performance index. Where SAW method was more faster by 89-93% compared to CPI method. Therefore it is expected that this application can be an evaluation material for the need of training and development for employee performances to be more optimal.

  6. Parental control over feeding in infancy. Influence of infant weight, appetite and feeding method.

    Science.gov (United States)

    Fildes, Alison; van Jaarsveld, Cornelia H M; Llewellyn, Clare; Wardle, Jane; Fisher, Abigail

    2015-08-01

    Parental control over feeding has been linked to child overweight. Parental control behaviours have been assumed to be exogenous to the child, but emerging evidence suggests they are also child-responsive. This study tests the hypothesis that parental control in early infancy is responsive to infant appetite and weight. Participants were 1920 mothers from the Gemini twin cohort, using one randomly selected child per family. Data come from questionnaires completed when the children were approximately 8 months. Mothers completed measures of 'pressure' and 'restriction', reported feeding method (breast- and bottle feeding), rated their infant's appetite during the first 3 months, provided health professional recorded weight measurements, and reported their concerns about their infant's weight. Logistic regression examined predictors of 'pressure' and 'restriction', adjusting for maternal demographics and BMI. Interactions between feeding method and control were also tested. 'Pressure' was associated with lower birth weight (OR = 0.79, 95% CI: 0.65-0.97), greater concern about underweight (OR = 1.88, 1.29-2.75), and lower infant appetite (OR = 0.59, 0.47-0.75). 'Restriction' was associated with higher appetite (OR = 1.44, 1.09-1.89) and bottle feeding (OR = 2.86, 2.18-3.75). A significant interaction with feeding method indicated that infants with high appetites were more likely to be restricted only if they were bottle-fed (OR = 1.52, 1.13-2.04). Mothers vary in their levels of control over milk-feeding and this is partly responsive to the infant's characteristics. They tend to pressure infants who are lighter and have a smaller appetite, and restrict infants with larger appetites if they are bottle-fed. Guidance on infant feeding may be better received if it acknowledges that parents respond to infant characteristics in order to achieve their feeding goals. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. Comparison of alternative weight recalibration methods for diagnosis-related groups

    Science.gov (United States)

    Rogowski, Jeannette Roskamp; Byrne, Daniel J.

    1990-01-01

    In this article, alternative methodologies for recalibration of the diagnosis-related group (DRG) weights are examined. Based on 1984 data, cost and charge-based weights are less congruent than those calculated with 1981 data. Previous studies using 1981 data demonstrated that cost- and charge-based weights were not very different. Charge weights result in higher payments to surgical DRGs and lower payments to medical DRGs, relative to cost weights. At the provider level, charge weights result in higher payments to large urban hospitals and teaching hospitals, relative to cost weights. PMID:10113568

  8. Generalized weighted ratio method for accurate turbidity measurement over a wide range.

    Science.gov (United States)

    Liu, Hongbo; Yang, Ping; Song, Hong; Guo, Yilu; Zhan, Shuyue; Huang, Hui; Wang, Hangzhou; Tao, Bangyi; Mu, Quanquan; Xu, Jing; Li, Dejun; Chen, Ying

    2015-12-14

    Turbidity measurement is important for water quality assessment, food safety, medicine, ocean monitoring, etc. In this paper, a method that accurately estimates the turbidity over a wide range is proposed, where the turbidity of the sample is represented as a weighted ratio of the scattered light intensities at a series of angles. An improvement in the accuracy is achieved by expanding the structure of the ratio function, thus adding more flexibility to the turbidity-intensity fitting. Experiments have been carried out with an 850 nm laser and a power meter fixed on a turntable to measure the light intensity at different angles. The results show that the relative estimation error of the proposed method is 0.58% on average for a four-angle intensity combination for all test samples with a turbidity ranging from 160 NTU to 4000 NTU.

  9. Mean-Variance-CvaR Model of Multiportfolio Optimization via Linear Weighted Sum Method

    Directory of Open Access Journals (Sweden)

    Younes Elahi

    2014-01-01

    Full Text Available We propose a new approach to optimizing portfolios to mean-variance-CVaR (MVC model. Although of several researches have studied the optimal MVC model of portfolio, the linear weighted sum method (LWSM was not implemented in the area. The aim of this paper is to investigate the optimal portfolio model based on MVC via LWSM. With this method, the solution of the MVC model of portfolio as the multiobjective problem is presented. In data analysis section, this approach in investing on two assets is investigated. An MVC model of the multiportfolio was implemented in MATLAB and tested on the presented problem. It is shown that, by using three objective functions, it helps the investors to manage their portfolio better and thereby minimize the risk and maximize the return of the portfolio. The main goal of this study is to modify the current models and simplify it by using LWSM to obtain better results.

  10. Transient Stability Promotion by FACTS Controller Based on Adaptive Inertia Weight Particle Swarm Optimization Method

    Directory of Open Access Journals (Sweden)

    Ghazanfar Shahgholian

    2018-01-01

    Full Text Available This paper examines the influence of Static Synchronous Series Compensator (SSSC on the oscillation damping control in the network. The performance of Flexible AC Transmission System (FACTS controller highly depends upon its parameters and appropriate location in the network. A new Adaptive Inertia Weight Particle Swarm Optimization (AIWPSO method is employed to design the parameters of the SSSC-base controller. In the proposed controller, the proper signal of the power system such as rotor angle is used as the feedback. AIWPSO technique has high flexibility and balanced mechanism for the local and global research. The proposed controller is compared with a Genetic Algorithm (GA based controller that confirms the operation of the controller. To show the integrity of the proposed controller method, the achievement of the simulations is done out in a single-machine infinite-bus and multi-machine grid under multi turmoil.

  11. A Weighted Two-Level Bregman Method with Dictionary Updating for Nonconvex MR Image Reconstruction

    Directory of Open Access Journals (Sweden)

    Qiegen Liu

    2014-01-01

    Full Text Available Nonconvex optimization has shown that it needs substantially fewer measurements than l1 minimization for exact recovery under fixed transform/overcomplete dictionary. In this work, two efficient numerical algorithms which are unified by the method named weighted two-level Bregman method with dictionary updating (WTBMDU are proposed for solving lp optimization under the dictionary learning model and subjecting the fidelity to the partial measurements. By incorporating the iteratively reweighted norm into the two-level Bregman iteration method with dictionary updating scheme (TBMDU, the modified alternating direction method (ADM solves the model of pursuing the approximated lp-norm penalty efficiently. Specifically, the algorithms converge after a relatively small number of iterations, under the formulation of iteratively reweighted l1 and l2 minimization. Experimental results on MR image simulations and real MR data, under a variety of sampling trajectories and acceleration factors, consistently demonstrate that the proposed method can efficiently reconstruct MR images from highly undersampled k-space data and presents advantages over the current state-of-the-art reconstruction approaches, in terms of higher PSNR and lower HFEN values.

  12. Robust gene selection methods using weighting schemes for microarray data analysis.

    Science.gov (United States)

    Kang, Suyeon; Song, Jongwoo

    2017-09-02

    A common task in microarray data analysis is to identify informative genes that are differentially expressed between two different states. Owing to the high-dimensional nature of microarray data, identification of significant genes has been essential in analyzing the data. However, the performances of many gene selection techniques are highly dependent on the experimental conditions, such as the presence of measurement error or a limited number of sample replicates. We have proposed new filter-based gene selection techniques, by applying a simple modification to significance analysis of microarrays (SAM). To prove the effectiveness of the proposed method, we considered a series of synthetic datasets with different noise levels and sample sizes along with two real datasets. The following findings were made. First, our proposed methods outperform conventional methods for all simulation set-ups. In particular, our methods are much better when the given data are noisy and sample size is small. They showed relatively robust performance regardless of noise level and sample size, whereas the performance of SAM became significantly worse as the noise level became high or sample size decreased. When sufficient sample replicates were available, SAM and our methods showed similar performance. Finally, our proposed methods are competitive with traditional methods in classification tasks for microarrays. The results of simulation study and real data analysis have demonstrated that our proposed methods are effective for detecting significant genes and classification tasks, especially when the given data are noisy or have few sample replicates. By employing weighting schemes, we can obtain robust and reliable results for microarray data analysis.

  13. Patella height changes post high tibial osteotomy

    Directory of Open Access Journals (Sweden)

    Siew Ghim Gooi

    2017-01-01

    Full Text Available Background: Medial opening wedge high tibial osteotomy (HTO is a well-described treatment in early medial compartmental osteoarthritis of the knee. However, two undesirable sequelae may follow –patella baja and changes in the posterior tibial slope (TS. Materials and Methods: We conducted a retrospective study in patients who underwent HTO in our center between September 2009 and February 2017. Preoperative and 6-week postoperative long-leg weight bearing films and lateral knee radiographs were assessed. Pre- and postoperative radiological measurements include the Caton-Deschamps Index (CDI, the mechanical axis deviation (MAD, and the posterior TS. Independant t-test and Pearson correlation test were performed. Results: A total of 106 knees were recruited. The mean age was 48.8 ± 10.8 years. 66 (62.3% and 40 (37.7% knees were from males and females, respectively. The mean pre- and postoperative measurements was (−9.70° ± 3.67° to 0.08° ± 2.80° (−varus; +valgus for the MAD, (7.14° ± 1.78° to 8.72° ± 3.11° for posterior TS, and (0.93° ± 0.084° to 0.82° ± 0.13° for CDI (P ≤ 0.001 for all. The association between patella height change and the level of osteotomy (supra-tubercle vs. infra-tubercle was statistically significant (P < 0.001. A supra-tubercle osteotomy cut significantly lowering patella height (P = 0.011. There was otherwise no statistically significant correlations between patella height changes and the correction angle (P = 0.187 or posterior TS change (P = 0.744. Conclusions: A medial opening wedge HTO above the tibial tubercle was significantly associated with lowering patella height or reducing CDI postoperatively. Based on our results, we would recommend the use of an infra-tubercle osteotomy during the corrective surgery to prevent the complication of patella baja.

  14. Measurement of the Top Quark Mass in Dilepton Final States with the Neutrino Weighting Method

    Energy Technology Data Exchange (ETDEWEB)

    Ilchenko, Yuriy [Southern Methodist Univ., Dallas, TX (United States)

    2012-12-15

    The top quark is the heaviest fundamental particle observed to date. The mass of the top quark is a free parameter in the Standard Model (SM). A precise measurement of its mass is particularly important as it sets an indirect constraint on the mass of the Higgs boson. It is also a useful constraint on contributions from physics beyond the SM and may play a fundamental role in the electroweak symmetry breaking mechanism. I present a measurement of the top quark mass in the dilepton channel using the Neutrino Weighting Method. The data sample corresponds to an integrated luminosity of 4.3 fb-1 of p$\\bar{p}$ collisions at Tevatron with √s = 1.96 TeV, collected with the DØ detector. Kinematically under-constrained dilepton events are analyzed by integrating over neutrino rapidity. Weight distributions of t$\\bar{t}$ signal and background are produced as a function of the top quark mass for different top quark mass hypotheses. The measurement is performed by constructing templates from the moments of the weight distributions and input top quark mass, followed by a subsequent likelihood t to data. The dominant systematic uncertainties from jet energy calibration is reduced by using a correction from `+jets channel. To replicate the quark avor dependence of the jet response in data, jets in the simulated events are additionally corrected. The result is combined with our preceding measurement on 1 fb-1 and yields mt = 174.0± 2.4 (stat.) ±1.4 (syst.) GeV.

  15. Use of a mobile social networking intervention for weight management: a mixed-methods study protocol.

    Science.gov (United States)

    Laranjo, Liliana; Lau, Annie Y S; Martin, Paige; Tong, Huong Ly; Coiera, Enrico

    2017-07-12

    Obesity and physical inactivity are major societal challenges and significant contributors to the global burden of disease and healthcare costs. Information and communication technologies are increasingly being used in interventions to promote behaviour change in diet and physical activity. In particular, social networking platforms seem promising for the delivery of weight control interventions.We intend to pilot test an intervention involving the use of a social networking mobile application and tracking devices ( Fitbit Flex 2 and Fitbit Aria scale) to promote the social comparison of weight and physical activity, in order to evaluate whether mechanisms of social influence lead to changes in those outcomes over the course of the study. Mixed-methods study involving semi-structured interviews and a pre-post quasi-experimental pilot with one arm, where healthy participants in different body mass index (BMI) categories, aged between 19 and 35 years old, will be subjected to a social networking intervention over a 6-month period. The primary outcome is the average difference in weight before and after the intervention. Secondary outcomes include BMI, number of steps per day, engagement with the intervention, social support and system usability. Semi-structured interviews will assess participants' expectations and perceptions regarding the intervention. Ethics approval was granted by Macquarie University's Human Research Ethics Committee for Medical Sciences on 3 November 2016 (ethics reference number 5201600716).The social network will be moderated by a researcher with clinical expertise, who will monitor and respond to concerns raised by participants. Monitoring will involve daily observation of measures collected by the fitness tracker and the wireless scale, as well as continuous supervision of forum interactions and posts. Additionally, a protocol is in place to monitor for participant misbehaviour and direct participants-in-need to appropriate sources of help

  16. Lucas Heights technology park

    International Nuclear Information System (INIS)

    1987-01-01

    The proposed Lucas Heights Technology Park will pound together the applied research programs of Government, tertiary and industry sectors, aiming to foster technology transfer particularly to the high-technology manufacturing industry. A description of the site is given along with an outline of the envisaged development, existing facilities and expertise. ills

  17. Applying a weighted random forests method to extract karst sinkholes from LiDAR data

    Science.gov (United States)

    Zhu, Junfeng; Pierskalla, William P.

    2016-02-01

    Detailed mapping of sinkholes provides critical information for mitigating sinkhole hazards and understanding groundwater and surface water interactions in karst terrains. LiDAR (Light Detection and Ranging) measures the earth's surface in high-resolution and high-density and has shown great potentials to drastically improve locating and delineating sinkholes. However, processing LiDAR data to extract sinkholes requires separating sinkholes from other depressions, which can be laborious because of the sheer number of the depressions commonly generated from LiDAR data. In this study, we applied the random forests, a machine learning method, to automatically separate sinkholes from other depressions in a karst region in central Kentucky. The sinkhole-extraction random forest was grown on a training dataset built from an area where LiDAR-derived depressions were manually classified through a visual inspection and field verification process. Based on the geometry of depressions, as well as natural and human factors related to sinkholes, 11 parameters were selected as predictive variables to form the dataset. Because the training dataset was imbalanced with the majority of depressions being non-sinkholes, a weighted random forests method was used to improve the accuracy of predicting sinkholes. The weighted random forest achieved an average accuracy of 89.95% for the training dataset, demonstrating that the random forest can be an effective sinkhole classifier. Testing of the random forest in another area, however, resulted in moderate success with an average accuracy rate of 73.96%. This study suggests that an automatic sinkhole extraction procedure like the random forest classifier can significantly reduce time and labor costs and makes its more tractable to map sinkholes using LiDAR data for large areas. However, the random forests method cannot totally replace manual procedures, such as visual inspection and field verification.

  18. A Local Weighted Nearest Neighbor Algorithm and a Weighted and Constrained Least-Squared Method for Mixed Odor Analysis by Electronic Nose Systems

    Directory of Open Access Journals (Sweden)

    Jyuo-Min Shyu

    2010-11-01

    Full Text Available A great deal of work has been done to develop techniques for odor analysis by electronic nose systems. These analyses mostly focus on identifying a particular odor by comparing with a known odor dataset. However, in many situations, it would be more practical if each individual odorant could be determined directly. This paper proposes two methods for such odor components analysis for electronic nose systems. First, a K-nearest neighbor (KNN-based local weighted nearest neighbor (LWNN algorithm is proposed to determine the components of an odor. According to the component analysis, the odor training data is firstly categorized into several groups, each of which is represented by its centroid. The examined odor is then classified as the class of the nearest centroid. The distance between the examined odor and the centroid is calculated based on a weighting scheme, which captures the local structure of each predefined group. To further determine the concentration of each component, odor models are built by regressions. Then, a weighted and constrained least-squares (WCLS method is proposed to estimate the component concentrations. Experiments were carried out to assess the effectiveness of the proposed methods. The LWNN algorithm is able to classify mixed odors with different mixing ratios, while the WCLS method can provide good estimates on component concentrations.

  19. Measuring decision weights in recognition experiments with multiple response alternatives: comparing the correlation and multinomial-logistic-regression methods.

    Science.gov (United States)

    Dai, Huanping; Micheyl, Christophe

    2012-11-01

    Psychophysical "reverse-correlation" methods allow researchers to gain insight into the perceptual representations and decision weighting strategies of individual subjects in perceptual tasks. Although these methods have gained momentum, until recently their development was limited to experiments involving only two response categories. Recently, two approaches for estimating decision weights in m-alternative experiments have been put forward. One approach extends the two-category correlation method to m > 2 alternatives; the second uses multinomial logistic regression (MLR). In this article, the relative merits of the two methods are discussed, and the issues of convergence and statistical efficiency of the methods are evaluated quantitatively using Monte Carlo simulations. The results indicate that, for a range of values of the number of trials, the estimated weighting patterns are closer to their asymptotic values for the correlation method than for the MLR method. Moreover, for the MLR method, weight estimates for different stimulus components can exhibit strong correlations, making the analysis and interpretation of measured weighting patterns less straightforward than for the correlation method. These and other advantages of the correlation method, which include computational simplicity and a close relationship to other well-established psychophysical reverse-correlation methods, make it an attractive tool to uncover decision strategies in m-alternative experiments.

  20. Computation of point reactor dynamics equations with thermal feedback via weighted residue method

    International Nuclear Information System (INIS)

    Suo Changan; Liu Xiaoming

    1986-01-01

    Point reactor dynamics equations with six groups of delayed neutrons have been computed via weighted-residual method in which the delta function was taken as a weighting function, and the parabolic with or without exponential factor as a trial function respectively for an insertion of large or smaller reactivity. The reactivity inserted into core can be varied with time, including insertion in forms of step function, polynomials up to second power and sine function. A thermal feedback of single flow channel model was added in. The thermal equations concerned were treated by use of a backward difference technique. A WRK code has been worked out, including implementation of an automatic selection of time span based on an input of error requirement and of an automatic change between computation with large reactivity and that with smaller one. On the condition of power varied slowly and without feedback, the results are not sensitive to the selection of values of time span. At last, the comparison of relevant results has shown that the agreement is quite well

  1. A Case Study on a Combination NDVI Forecasting Model Based on the Entropy Weight Method

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Shengzhi; Ming, Bo; Huang, Qiang; Leng, Guoyong; Hou, Beibei

    2017-05-05

    It is critically meaningful to accurately predict NDVI (Normalized Difference Vegetation Index), which helps guide regional ecological remediation and environmental managements. In this study, a combination forecasting model (CFM) was proposed to improve the performance of NDVI predictions in the Yellow River Basin (YRB) based on three individual forecasting models, i.e., the Multiple Linear Regression (MLR), Artificial Neural Network (ANN), and Support Vector Machine (SVM) models. The entropy weight method was employed to determine the weight coefficient for each individual model depending on its predictive performance. Results showed that: (1) ANN exhibits the highest fitting capability among the four orecasting models in the calibration period, whilst its generalization ability becomes weak in the validation period; MLR has a poor performance in both calibration and validation periods; the predicted results of CFM in the calibration period have the highest stability; (2) CFM generally outperforms all individual models in the validation period, and can improve the reliability and stability of predicted results through combining the strengths while reducing the weaknesses of individual models; (3) the performances of all forecasting models are better in dense vegetation areas than in sparse vegetation areas.

  2. The weighted function method: A handy tool for flood frequency analysis or just a curiosity?

    Science.gov (United States)

    Bogdanowicz, Ewa; Kochanek, Krzysztof; Strupczewski, Witold G.

    2018-04-01

    The idea of the Weighted Function (WF) method for estimation of Pearson type 3 (Pe3) distribution introduced by Ma in 1984 has been revised and successfully applied for shifted inverse Gaussian (IGa3) distribution. Also the conditions of WF applicability to a shifted distribution have been formulated. The accuracy of WF flood quantiles for both Pe3 and IGa3 distributions was assessed by Monte Caro simulations under the true and false distribution assumption versus the maximum likelihood (MLM), moment (MOM) and L-moments (LMM) methods. Three datasets of annual peak flows of Polish catchments serve the case studies to compare the results of the WF, MOM, MLM and LMM performance for the real flood data. For the hundred-year flood the WF method revealed the explicit superiority only over the MLM surpassing the MOM and especially LMM both for the true and false distributional assumption with respect to relative bias and relative mean root square error values. Generally, the WF method performs well and for hydrological sample size and constitutes good alternative for the estimation of the flood upper quantiles.

  3. Iterative raw measurements restoration method with penalized weighted least squares approach for low-dose CT

    Science.gov (United States)

    Takahashi, Hisashi; Goto, Taiga; Hirokawa, Koichi; Miyazaki, Osamu

    2014-03-01

    Statistical iterative reconstruction and post-log data restoration algorithms for CT noise reduction have been widely studied and these techniques have enabled us to reduce irradiation doses while maintaining image qualities. In low dose scanning, electronic noise becomes obvious and it results in some non-positive signals in raw measurements. The nonpositive signal should be converted to positive signal so that it can be log-transformed. Since conventional conversion methods do not consider local variance on the sinogram, they have difficulty of controlling the strength of the filtering. Thus, in this work, we propose a method to convert the non-positive signal to the positive signal by mainly controlling the local variance. The method is implemented in two separate steps. First, an iterative restoration algorithm based on penalized weighted least squares is used to mitigate the effect of electronic noise. The algorithm preserves the local mean and reduces the local variance induced by the electronic noise. Second, smoothed raw measurements by the iterative algorithm are converted to the positive signal according to a function which replaces the non-positive signal with its local mean. In phantom studies, we confirm that the proposed method properly preserves the local mean and reduce the variance induced by the electronic noise. Our technique results in dramatically reduced shading artifacts and can also successfully cooperate with the post-log data filter to reduce streak artifacts.

  4. Landslide susceptibility mapping by comparing weight of evidence, fuzzy logic, and frequency ratio methods

    Directory of Open Access Journals (Sweden)

    V. Vakhshoori

    2016-09-01

    Full Text Available A regional scale basin susceptible to landslide located in Qaemshahr area in northern Iran was chosen for comparing the reliability of weight of evidence (WofE, fuzzy logic, and frequency ratio (FR methods for landslide susceptibility mapping. The locations of 157 landslides were identified using Google Earth® or extracted from archived data, from which, 22 rockslides were eliminated from the data-set due to their different conditions. The 135 remaining landslides were randomly divided into two groups of modelling (70% and validation (30% data-sets. Elevation, slope degree, slope aspect, lithology, land use/cover, normalized difference vegetation index, rainfall, distance to drainage network, roads, and faults were considered as landslide causative factors. The landslide susceptibility maps were prepared using the three mentioned methods. The validation process was measured by the success and prediction rates calculated by area under receiver operating characteristic curve. The ‘OR’, ‘AND’, ‘SUM’, and ‘PRODUCT’ operators of the fuzzy logic method were unacceptable because these operators classify the target area into either very high or very low susceptible zones that are inconsistent with the physical conditions of the study area. The results of fuzzy ‘GAMMA’ operators were relatively reliable while, FR and WofE methods showed results that are more reliable.

  5. From morbid obesity to a healthy weight using cognitive-behavioral methods: a woman's three-year process with one and one-half years of weight maintenance.

    Science.gov (United States)

    Annesi, James J; Tennant, Gisèle A

    2012-01-01

    Obesity is a national health problem regularly confronting medical professionals. Although reduced-energy (kilocalorie [kcal]) eating and increased exercise will reliably reduce weight, these behaviors have been highly resistant to sustained change. To control eating using theory-based cognitive-behavioral methods that leverage the positive psychosocial effects of newly initiated exercise as an alternate to typical approaches of education about appropriate nutrition. A woman, age 48 years, with morbid obesity initiated exercise through a 6-month exercise support protocol based on social cognitive and self-efficacy theory (The Coach Approach). This program was followed by periodic individual meetings with a wellness professional intended to transfer behavioral skills learned to adapt to regular exercise, to then control eating. There was consistent recording of exercises completed, foods consumed, various psychosocial and lifestyle factors, and weight. Over the 4.4 years reported, weight decreased from 117.6 kg to 59.0 kg, and body mass index (BMI) decreased from 43.1 kg/m(2) to 21.6 kg/m(2). Mean energy intake initially decreased to 1792 kcal/day and further dropped to 1453 kcal/day by the end of the weight-loss phase. Consistent with theory, use of self-regulatory skills, self-efficacy, and overall mood significantly predicted both increased exercise and decreased energy intake. Morbid obesity was reduced to a healthy weight within 3.1 years, and weight was maintained in the healthy range through the present (1.3 years later). This case supports theory-based propositions that exercise-induced changes in self-regulation, self-efficacy, and mood transfer to and reinforce improvements in corresponding psychosocial factors related to controlled eating.

  6. Global effects of income and income inequality on adult height and sexual dimorphism in height.

    Science.gov (United States)

    Bogin, Barry; Scheffler, Christiane; Hermanussen, Michael

    2017-03-01

    Average adult height of a population is considered a biomarker of the quality of the health environment and economic conditions. The causal relationships between height and income inequality are not well understood. We analyze data from 169 countries for national average heights of men and women and national-level economic factors to test two hypotheses: (1) income inequality has a greater association with average adult height than does absolute income; and (2) neither income nor income inequality has an effect on sexual dimorphism in height. Average height data come from the NCD-RisC health risk factor collaboration. Economic indicators are derived from the World Bank data archive and include gross domestic product (GDP), Gross National Income per capita adjusted for personal purchasing power (GNI_PPP), and income equality assessed by the Gini coefficient calculated by the Wagstaff method. Hypothesis 1 is supported. Greater income equality is most predictive of average height for both sexes. GNI_PPP explains a significant, but smaller, amount of the variation. National GDP has no association with height. Hypothesis 2 is rejected. With greater average adult height there is greater sexual dimorphism. Findings support a growing literature on the pernicious effects of inequality on growth in height and, by extension, on health. Gradients in height reflect gradients in social disadvantage. Inequality should be considered a pollutant that disempowers people from the resources needed for their own healthy growth and development and for the health and good growth of their children. © 2017 Wiley Periodicals, Inc.

  7. Registration of T2-weighted and diffusion-weighted MR images of the prostate: comparison between manual and landmark-based methods

    Science.gov (United States)

    Peng, Yahui; Jiang, Yulei; Soylu, Fatma N.; Tomek, Mark; Sensakovic, William; Oto, Aytekin

    2012-02-01

    Quantitative analysis of multi-parametric magnetic resonance (MR) images of the prostate, including T2-weighted (T2w) and diffusion-weighted (DW) images, requires accurate image registration. We compared two registration methods between T2w and DW images. We collected pre-operative MR images of 124 prostate cancer patients (68 patients scanned with a GE scanner and 56 with Philips scanners). A landmark-based rigid registration was done based on six prostate landmarks in both T2w and DW images identified by a radiologist. Independently, a researcher manually registered the same images. A radiologist visually evaluated the registration results by using a 5-point ordinal scale of 1 (worst) to 5 (best). The Wilcoxon signed-rank test was used to determine whether the radiologist's ratings of the results of the two registration methods were significantly different. Results demonstrated that both methods were accurate: the average ratings were 4.2, 3.3, and 3.8 for GE, Philips, and all images, respectively, for the landmark-based method; and 4.6, 3.7, and 4.2, respectively, for the manual method. The manual registration results were more accurate than the landmark-based registration results (p < 0.0001 for GE, Philips, and all images). Therefore, the manual method produces more accurate registration between T2w and DW images than the landmark-based method.

  8. GIS Supported Landslide Susceptibility Modeling at Regional Scale: An Expert-Based Fuzzy Weighting Method

    Directory of Open Access Journals (Sweden)

    Christos Chalkias

    2014-04-01

    Full Text Available The main aim of this paper is landslide susceptibility assessment using fuzzy expert-based modeling. Factors that influence landslide occurrence, such as elevation, slope, aspect, lithology, land cover, precipitation and seismicity were considered. Expert-based fuzzy weighting (EFW approach was used to combine these factors for landslide susceptibility mapping (Peloponnese, Greece. This method produced a landslide susceptibility map of the investigated area. The landslides under investigation have more or less same characteristics: lateral based and downslope shallow movement of soils or rocks. The validation of the model reveals, that predicted susceptibility levels are found to be in good agreement with the past landslide occurrences. Hence, the obtained landslide susceptibility map could be acceptable, for landslide hazard prevention and mitigation at regional scale.

  9. A decision support system for the promotion of Employee in Plaza Asia Method Using Weighted Product

    Directory of Open Access Journals (Sweden)

    Egi Badar Sambani

    2016-06-01

    Full Text Available Decision-making in a company is important because decisions taken by managers is the result of a final thought to be carried out by employees. Asia is the largest mall Plaza sepriangan east, where the assessment process includes the promotion employee attendance, productivity (work, integrity (nature, skill (ability and loyalty (faithfulness. Method Using Weighted Product (WP can help in decision-making to determine the promotion of employees in the company, as well as the appraisal process more efficient so the store manager can determine employee promotions quickly. By using decision support system that has a database, employee data can be stored in the database. So that in case of errors in inputting can be corrected without having to re-enter the data. With the Decision Support System will address the issues raised in the Plaza Asia, so the promotion process will be faster.

  10. Effect of kangaroo method on the risk of hypothermia and duration of birth weight regain in low birth weight infants: A randomized controlled trial

    OpenAIRE

    I G. A. P. Eka Pratiwi; Soetjiningsih Soetjiningsih; I Made Kardana

    2009-01-01

    Background In Indonesia, the infant mortality rate in 2001 was 50 per 1000 live births, with 34.7% due to perinatal death. This perinatal death was associated with low birth weight (LBW) newborn, which was caused by prematurity, infection, birth asphyxia, hypothermia, and inadequate breast feeding. In developing countries, lack of facilities of LBW infant care leads to the utilization of kangaroo method as care to prevent hypothermia in LBW newborn. Objective To evaluate the differences of...

  11. 3-D thermal weight function method and multiple virtual crack extension technique for thermal shock problems

    International Nuclear Information System (INIS)

    Lu Yanlin; Zhou Xiao; Qu Jiadi; Dou Yikang; He Yinbiao

    2005-01-01

    An efficient scheme, 3-D thermal weight function (TWF) method, and a novel numerical technique, multiple virtual crack extension (MVCE) technique, were developed for determination of histories of transient stress intensity factor (SIF) distributions along 3-D crack fronts of a body subjected to thermal shock. The TWF is a universal function, which is dependent only on the crack configuration and body geometry. TWF is independent of time during thermal shock, so the whole history of transient SIF distributions along crack fronts can be directly calculated through integration of the products of TWF and transient temperatures and temperature gradients. The repeated determinations of the distributions of stresses (or displacements) fields for individual time instants are thus avoided in the TWF method. An expression of the basic equation for the 3-D universal weight function method for Mode I in an isotropic elastic body is derived. This equation can also be derived from Bueckner-Rice's 3-D WF formulations in the framework of transformation strain. It can be understood from this equation that the so-called thermal WF is in fact coincident with the mechanical WF except for some constants of elasticity. The details and formulations of the MVCE technique are given for elliptical cracks. The MVCE technique possesses several advantages. The specially selected linearly independent VCE modes can directly be used as shape functions for the interpolation of unknown SIFs. As a result, the coefficient matrix of the final system of equations in the MVCE method is a triple-diagonal matrix and the values of the coefficients on the main diagonal are large. The system of equations has good numerical properties. The number of linearly independent VCE modes that can be introduced in a problem is unlimited. Complex situations in which the SIFs vary dramatically along crack fronts can be numerically well simulated by the MVCE technique. An integrated system of programs for solving the

  12. The effect of skin thermistor fixation method on weighted mean skin temperature

    International Nuclear Information System (INIS)

    Tyler, Christopher James

    2011-01-01

    The purpose of this study was to investigate the effect of three different skin thermistor attachment methods on weighted mean skin temperature (WMT sk ) at three different ambient temperatures (∼24 °C (TEMP); ∼30 °C (WARM); ∼35 °C (HOT)) compared to uncovered thermistors. Eleven, non-acclimated, volunteers completed three 5 min bouts of submaximal cycling (∼70 W mechanical work)—one at each environmental condition in sequential order (TEMP, WARM, HOT). One thermistor was fixed to the sternal notch whilst four skin thermistors were spaced at 3 cm intervals on each of the sites on the limbs as per the formula of Ramanathan (1964 J. Appl. Physiol. 19 531–3). Each thermistor was either held against the skin uncovered (UC) or attached with surgical acrylic film dressing (T); surgical acrylic film dressing and hypoallergenic surgical tape (TT) or surgical acrylic film dressing, hypoallergenic surgical tape and surgical bandage (TTC). The WMT sk calculated was significantly lower in UC compared to T, TT and TTC (p < 0.001, d = 0.46), in T compared to TT and TTC (p < 0.001, d = 0.33) and in TT compared to TTC (p < 0.001; d = 0.25). The mean differences (across the three temperatures) were + 0.27 ±0.34 °C, + 0.52 ± 0.35 °C and + 0.82 ± 0.34 °C for T, TT and TTC, respectively. The results demonstrate that the method of skin thermistor attachment can result in the significant over-estimation of weighted mean skin temperature

  13. Predicting hepatitis B monthly incidence rates using weighted Markov chains and time series methods.

    Science.gov (United States)

    Shahdoust, Maryam; Sadeghifar, Majid; Poorolajal, Jalal; Javanrooh, Niloofar; Amini, Payam

    2015-01-01

    Hepatitis B (HB) is a major global mortality. Accurately predicting the trend of the disease can provide an appropriate view to make health policy disease prevention. This paper aimed to apply three different to predict monthly incidence rates of HB. This historical cohort study was conducted on the HB incidence data of Hamadan Province, the west of Iran, from 2004 to 2012. Weighted Markov Chain (WMC) method based on Markov chain theory and two time series models including Holt Exponential Smoothing (HES) and SARIMA were applied on the data. The results of different applied methods were compared to correct percentages of predicted incidence rates. The monthly incidence rates were clustered into two clusters as state of Markov chain. The correct predicted percentage of the first and second clusters for WMC, HES and SARIMA methods was (100, 0), (84, 67) and (79, 47) respectively. The overall incidence rate of HBV is estimated to decrease over time. The comparison of results of the three models indicated that in respect to existing seasonality trend and non-stationarity, the HES had the most accurate prediction of the incidence rates.

  14. Developing Common Set of Weights with Considering Nondiscretionary Inputs and Using Ideal Point Method

    Directory of Open Access Journals (Sweden)

    Reza Kiani Mavi

    2013-01-01

    Full Text Available Data envelopment analysis (DEA is used to evaluate the performance of decision making units (DMUs with multiple inputs and outputs in a homogeneous group. In this way, the acquired relative efficiency score for each decision making unit lies between zero and one where a number of them may have an equal efficiency score of one. DEA successfully divides them into two categories of efficient DMUs and inefficient DMUs. A ranking for inefficient DMUs is given but DEA does not provide further information about the efficient DMUs. One of the popular methods for evaluating and ranking DMUs is the common set of weights (CSW method. We generate a CSW model with considering nondiscretionary inputs that are beyond the control of DMUs and using ideal point method. The main idea of this approach is to minimize the distance between the evaluated decision making unit and the ideal decision making unit (ideal point. Using an empirical example we put our proposed model to test by applying it to the data of some 20 bank branches and rank their efficient units.

  15. A novel dietary restriction method for group-housed rats: weight gain and clinical chemistry characterization.

    Science.gov (United States)

    Kasanen, I H E; Inhilä, K J; Nevalainen, J I; Väisänen, S B; Mertanen, A M O; Mering, S M; Nevalainen, T O

    2009-04-01

    Laboratory rodents are usually fed ad libitum. Moderate dietary restriction decreases mortality and morbidity compared with ad libitum feeding. There are, however, problems in achieving dietary restriction. Traditional methods of restricted feeding may interfere with the diurnal rhythms of the animals and are not compatible with group-housing of rodents. We have invented a novel method, the diet board, for restricting the feed intake of laboratory rats. The use of the diet board moderately decreased weight gain of rats when compared with ad libitum-fed animals. The diet board retarded skeletal growth only minimally, whereas major differences were found in body fat depositions. Serum free fatty acid, triglyceride and cholesterol values were lower in diet-restricted rats, while the opposite was true for serum creatine kinase. There were no differences in total protein, albumin or alanine aminotransferase. Moreover, differences in interindividual variances in parameters were not detected between the groups; hence this study could not combine the diet board with reduction potential. The diet board provides mild to moderate dietary restriction for group-housed rats and is unlikely to interfere with the diurnal eating rhythm. The diet board can also be seen as a cage furniture item, dividing the open cage space and increasing the structural complexity of the environment. In conclusion, the diet board appears to possess refinement potential when compared with traditional methods of dietary restriction.

  16. APTCARE - Lucas Heights

    International Nuclear Information System (INIS)

    1986-05-01

    This plan details command co-ordination and support responses of Commonwealth and State Authorities in the event of an accident with offsite consequences at the Lucas Heights Research Laboratories. The plan has been prepared by the AAEC Local Liaison Working Party, comprising representatives of the Australian Atomic Energy Commission, NSW Police Department, NSW Board of Fire Commissioners, NSW State Emergency Services and Civil Defence Organisation, NSW Department of Health, NSW Department of Environment and Planning and Sutherland Shire Council

  17. Fat suppression at three-dimensional T1-weighted MR imaging of the hands: Dixon method versus CHESS technique.

    Science.gov (United States)

    Kirchgesner, T; Perlepe, V; Michoux, N; Larbi, A; Vande Berg, B

    2018-01-01

    To compare the effectiveness of fat suppression and the image quality of the Dixon method with those of the chemical shift-selective (CHESS) technique in hands of normal subjects at non-enhanced three-dimensional (3D) T1-weighted MR imaging. Both hands of 14 healthy volunteers were imaged with 3D fast spoiled gradient echo (FSPGR) T1-weighted Dixon, 3D FSPGR T1-weighted CHESS and 3D T1-weighted fast spin echo (FSE) CHESS sequences in a 1.5T MR scanner. Three radiologists scored the effectiveness of fat suppression in bone marrow (EFS BM ) and soft tissues (EFS ST ) in 20 joints per subject. One radiologist measured the signal-to-noise ratio (SNR) in 10 bones per subject. Statistical analysis used two-way ANOVA with random effects (PCHESS sequence and the 3D FSE T1-weighted CHESS sequence (PCHESS sequence (PCHESS sequence in the axial plane (P=0.0028). Mean SNR was statistically significantly higher for 3D FSPGR T1-weighted Dixon sequence than for 3D FSPGR T1-weighted CHESS and 3D FSE T1-weighted CHESS sequences (PCHESS technique at 3D T1-weighted MR imaging of the hands. Copyright © 2017 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

  18. Birth order progressively affects childhood height.

    Science.gov (United States)

    Savage, Tim; Derraik, José G B; Miles, Harriet L; Mouat, Fran; Cutfield, Wayne S; Hofman, Paul L

    2013-09-01

    There is evidence suggesting that first-born children and adults are anthropometrically different to later-borns. Thus, we aimed to assess whether birth order was associated with changes in growth and metabolism in childhood. We studied 312 healthy prepubertal children: 157 first-borns and 155 later-borns. Children were aged 3-10 years, born 37-41 weeks gestation, and of birth weight appropriate-for-gestational-age. Clinical assessments included measurement of children's height, weight, fasting lipid and hormonal profiles and DEXA-derived body composition. First-borns were taller than later-borns (P < 0·0001), even when adjusted for parents' heights (0·31 vs 0·03 SDS; P = 0·001). There was an incremental height decrease with increasing birth order, so that first-borns were taller than second-borns (P < 0·001), who were in turn taller than third-borns (P = 0·007). Further, among sibling pairs both height SDS (P = 0·009) and adjusted height SDS (P < 0·0001) were lower in second- vs first-born children. Consistent with differences in stature, first- (P = 0·043) and second-borns (P = 0·003) had higher IGF-I concentrations than third-borns. Both first- (P < 0·001) and second-borns (P = 0·004) also had reduced abdominal adiposity (lower android fat to gynoid fat ratio) when compared with third-borns. Other parameters of adiposity and blood lipids were unaffected by birth order. First-borns were taller than later-born children, with an incremental height reduction from first to third birth order. These differences were present after correction for genetic height, and associated to some extent with alterations in plasma IGF-I. Our findings strengthen the evidence that birth order is associated with phenotypic changes in childhood. © 2013 John Wiley & Sons Ltd.

  19. Weights of Evidence Method for Landslide Susceptibility Mapping in Takengon, Central Aceh, Indonesia

    Science.gov (United States)

    Pamela; Sadisun, Imam A.; Arifianti, Yukni

    2018-02-01

    Takengon is an area prone to earthquake disaster and landslide. On July 2, 2013, Central Aceh earthquake induced large numbers of landslides in Takengon area, which resulted in casualties of 39 people. This location was chosen to assess the landslide susceptibility of Takengon, using a statistical method, referred to as the weight of evidence (WoE). This WoE model was applied to indicate the main factors influencing the landslide susceptible area and to derive landslide susceptibility map of Takengon. The 251 landslides randomly divided into two groups of modeling/training data (70%) and validation/test data sets (30%). Twelve thematic maps of evidence are slope degree, slope aspect, lithology, land cover, elevation, rainfall, lineament, peak ground acceleration, curvature, flow direction, distance to river and roads used as landslide causative factors. According to the AUC, the significant factor controlling the landslide is the slope, the slope aspect, peak ground acceleration, elevation, lithology, flow direction, lineament, and rainfall respectively. Analytical result verified by using test data of landslide shows AUC prediction rate is 0.819 and AUC success rate with all landslide data included is 0.879. This result showed the selective factors and WoE method as good models for assessing landslide susceptibility. The landslide susceptibility map of Takengon shows the probabilities, which represent relative degrees of susceptibility for landslide proneness in Takengon area.

  20. Complexity Quantification for Overhead Transmission Line Emergency Repair Scheme via a Graph Entropy Method Improved with Petri Net and AHP Weighting Method

    Directory of Open Access Journals (Sweden)

    Jing Zhou

    2014-01-01

    Full Text Available According to the characteristics of emergency repair in overhead transmission line accidents, a complexity quantification method for emergency repair scheme is proposed based on the entropy method in software engineering, which is improved by using group AHP (analytical hierarchical process method and Petri net. Firstly, information structure chart model and process control flowchart model could be built by Petri net. Then impact factors on complexity of emergency repair scheme could be quantified into corresponding entropy values, respectively. Finally, by using group AHP method, weight coefficient of each entropy value would be given before calculating the overall entropy value for the whole emergency repair scheme. By comparing group AHP weighting method with average weighting method, experiment results for the former showed a stronger correlation between quantified entropy values of complexity and the actual consumed time in repair, which indicates that this new method is more valid.

  1. Classical and modern optimization methods in minimum weight design of elastic rotating disk with variable thickness and density

    International Nuclear Information System (INIS)

    Jafari, S.; Hojjati, M.H.; Fathi, A.

    2012-01-01

    Rotating disks work mostly at high angular velocity and this results a large centrifugal force and consequently induce large stresses and deformations. Minimizing weight of such disks yields to benefits such as low dead weights and lower costs. This paper aims at finding an optimal disk profiles for minimum weight design using the Karush-Kuhn-Tucker method (KKT) as a classical optimization method, simulated annealing (SA) and particle swarm optimization (PSO) as two modern optimization techniques. Some semi-analytical solutions for the elastic stress distribution in a rotating annular disk with uniform and variable thickness and density proposed by the authors in the previous works have been used. The von Mises failure criterion of optimum disk is used as an inequality constraint to make sure that the rotating disk does not fail. The results show that the minimum weight obtained for all three methods is almost identical. The KKT method gives a profile with slightly less weight (6% less than SA and 1% less than PSO) while the implementation of PSO and SA methods are easier and provide more flexibility compared with those of the KKT method. The effectiveness of the proposed optimization methods is shown. - Highlights: ► Karush-Kuhn-Tucker, simulated annealing and particle swarm methods are used. ► The KKT gives slightly less weight (6% less than SA and 1% less than PSO). ► Implementation of PSO and SA methods are easier and provide more flexibility. ► The effectiveness of the proposed optimization methods is shown.

  2. Classical and modern optimization methods in minimum weight design of elastic rotating disk with variable thickness and density

    Energy Technology Data Exchange (ETDEWEB)

    Jafari, S. [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of); Hojjati, M.H., E-mail: Hojjati@nit.ac.ir [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of); Fathi, A. [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of)

    2012-04-15

    Rotating disks work mostly at high angular velocity and this results a large centrifugal force and consequently induce large stresses and deformations. Minimizing weight of such disks yields to benefits such as low dead weights and lower costs. This paper aims at finding an optimal disk profiles for minimum weight design using the Karush-Kuhn-Tucker method (KKT) as a classical optimization method, simulated annealing (SA) and particle swarm optimization (PSO) as two modern optimization techniques. Some semi-analytical solutions for the elastic stress distribution in a rotating annular disk with uniform and variable thickness and density proposed by the authors in the previous works have been used. The von Mises failure criterion of optimum disk is used as an inequality constraint to make sure that the rotating disk does not fail. The results show that the minimum weight obtained for all three methods is almost identical. The KKT method gives a profile with slightly less weight (6% less than SA and 1% less than PSO) while the implementation of PSO and SA methods are easier and provide more flexibility compared with those of the KKT method. The effectiveness of the proposed optimization methods is shown. - Highlights: Black-Right-Pointing-Pointer Karush-Kuhn-Tucker, simulated annealing and particle swarm methods are used. Black-Right-Pointing-Pointer The KKT gives slightly less weight (6% less than SA and 1% less than PSO). Black-Right-Pointing-Pointer Implementation of PSO and SA methods are easier and provide more flexibility. Black-Right-Pointing-Pointer The effectiveness of the proposed optimization methods is shown.

  3. [Analysis of clinical relevance applied to 3methods of reducing weight in overweight or obesity followed-up for one year].

    Science.gov (United States)

    Tárraga Marcos, M L; Panisello Royo, J M; Carbayo Herencia, J A; Rosich Domenech, N; Alins Presas, J; Castell Panisello, E; Tárraga López, P J

    To analyse the effect of the use/implementation of 3methods to reduce weight in overweight or obese patients during one year of follow up. The design corresponds to a double-blind, randomised, controlled clinical trial with 3arms, and 12 months of follow-up. Patients were randomised into 3intervention groups: obesity motivational intervention, with a nurse previously trained in motivational intervention by expert psychologists (G1; n=60); lower intensity consultation, non-motivational group, with digital platform support (G2; N=61), and a third group that received recommendations for weight loss and follow-up in Primary Care Clinic (G3; n=59). Anthropometric variables (weight, height, and abdominal-waist circumference) were measured, and the percentage of patients who managed to reduce their weight ≥5% was considered as the main measurement of treatment effectiveness. All groups significantly decreased body weight at the end of the study, with a reduction in G1 (-5.6kg) followed by G2 (-4.3kg), and G3 (-1.7kg), with an overall mean: -3.9kg. The indicators of clinical relevance were in G1/G3: relative risk (RR): 4.99 (95% CI: from 2.71 to 9.18); relative risk reduction (RRR): 399.1% (171.3 to 818.0); Absolute risk reduction (RAR): 65.3% (from 51.5 to 79.1) and NNT: 2 (from 2 to 2). In the G2/G3 groups: RR: 3.01 (from 1.57 to 5.76); RRR: 200.5% (from 57.0 to 475.5); RAR: 32.8% (from 16.9 to 48.7) and NNT: 4 (from 3 to 6). In the G1/G2 groups: RR: 1.66 (from 1.25 to 2.20); RRR: 66.1% (from 25.3 to 120.1); RAR: 32.5% (from 16.6 to 48.4) and NNT: 4 (from 3 to 7). All 3groups were able to reduce weight. Although the group with motivational intervention achieved the greatest decrease, as well as the most favourable clinical relevance indicators. Copyright © 2017 SEH-LELHA. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. A New Method for Improving the Discrimination Power and Weights Dispersion in the Data Envelopment Analysis

    Directory of Open Access Journals (Sweden)

    S. Kordrostami

    2013-06-01

    Full Text Available The appropriate choice of input-output weights is necessary to have a successful DEA model. Generally, if the number of DMUs i.e., n, is less than number of inputs and outputs i.e., m+s, then many of DMUs are introduced as efficient then the discrimination between DMUs is not possible. Besides, DEA models are free to choose the best weights. For resolving the problems that are resulted from freedom of weights, some constraints are set on the input-output weights. Symmetric weight constraints are a kind of weight constrains. In this paper, we represent a new model based on a multi-criterion data envelopment analysis (MCDEA are developed to moderate the homogeneity of weights distribution by using symmetric weight constrains.Consequently, we show that the improvement of the dispersal of unrealistic input-output weights and the increasing discrimination power for our suggested models. Finally, as an application of the new model, we use this model to evaluate and ranking guilan selected hospitals.

  5. Comparison among T1-Weighted Magnetic Resonance Imaging, Modified Dixon Method, and Magnetic Resonance Spectroscopy in Measuring Bone Marrow Fat

    Directory of Open Access Journals (Sweden)

    Wei Shen

    2013-01-01

    Full Text Available Introduction. An increasing number of studies are utilizing different magnetic resonance (MR methods to quantify bone marrow fat due to its potential role in osteoporosis. Our aim is to compare the measurements of bone marrow fat among T1-weighted magnetic resonance imaging (MRI, modified Dixon method (also called fat fraction MRI (FFMRI, and magnetic resonance spectroscopy (MRS. Methods. Contiguous MRI scans were acquired in 27 Caucasian postmenopausal women with a modified Dixon method (i.e., FFMRI. Bone marrow adipose tissue (BMAT of T1-weighted MRI and bone marrow fat fraction of the L3 vertebra and femoral necks were quantified using SliceOmatic and Matlab. MRS was also acquired at the L3 vertebra. Results. Correlation among the three MR methods measured bone marrow fat fraction and BMAT ranges from 0.78 to 0.88 in the L3 vertebra. Correlation between BMAT measured by T1-weighted MRI and bone marrow fat fraction measured by modified FFMRI is 0.86 in femoral necks. Conclusion. There are good correlations among T1-weighted MRI, FFMRI, and MRS for bone marrow fat quantification. The inhomogeneous distribution of bone marrow fat, the threshold segmentation of the T1-weighted MRI, and the ambiguity of the FFMRI may partially explain the difference among the three methods.

  6. Relationship between volition, physical activity and weight loss maintenance: Study rationale, design, methods and baseline characteristics.

    Science.gov (United States)

    Dandanell, Sune; Elbe, Anne-Marie; Pfister, Gertrud; Elsborg, Peter; W Helge, Jørn

    2017-05-01

    To investigate the relationship between volition, physical activity and weight loss maintenance. We recruited 84 sedentary (maximal oxygen uptake: 25 ± 5 ml/min), overweight and obese (Body mass index (BMI) 38 ± 7 m/h 2 , fat 44 ± 7 %) women ( n = 55) and men ( n = 29) for an interdisciplinary prospective study with follow-up. The change in lifestyle and weight loss is promoted via a 3-month intensive lifestyle intervention at a private health school. The intervention consists of supervised training (1-3 hours/day), a healthy hypo-caloric diet (-500 to -700 kCal/day) and education in healthy lifestyle in classes/groups. The participants' body weight and composition (Dual Energy X-ray absorptiometry), volitional skills (questionnaire), physical activity level (heart rate accelerometer/questionnaire) and maximal oxygen uptake (indirect calorimetry) are to be monitored before, after, and 3 and 12 months after the intervention. At the 12-month follow-up, three different groups will be established: Clinical weight loss maintenance (> 10% weight loss from baseline), moderate weight loss maintenance (1-10% weight loss) and no weight loss (or weight regain). A linear mixed model analysis will be used to compare levels of volitional skills, physical activity and maximal oxygen uptake over time, between the three groups. Correlational analyses will be used to investigate possible associations between volition, maximal oxygen uptake, physical activity level and weight loss maintenance. If specific volitional skills are identified as predictors of adherence to physical activity and success in clinical weight loss maintenance, these can be trained in future intensive lifestyle interventions in order to optimize the success rate.

  7. Memory for target height is scaled to observer height.

    Science.gov (United States)

    Twedt, Elyssa; Crawford, L Elizabeth; Proffitt, Dennis R

    2012-04-01

    According to the embodied approach to visual perception, individuals scale the environment to their bodies. This approach highlights the central role of the body for immediate, situated action. The present experiments addressed whether body scaling--specifically, eye-height scaling--occurs in memory when action is not immediate. Participants viewed standard targets that were either the same height as, taller than, or shorter than themselves. Participants then viewed a comparison target and judged whether the comparison was taller or shorter than the standard target. Participants were most accurate when the standard target height matched their own heights, taking into account postural changes. Participants were biased to underestimate standard target height, in general, and to push standard target height away from their own heights. These results are consistent with the literature on eye-height scaling in visual perception and suggest that body scaling is not only a useful metric for perception and action, but is also preserved in memory.

  8. Concordant preferences for actual height and facial cues to height

    OpenAIRE

    Re, Daniel Edward; Perrett, David I.

    2012-01-01

    Physical height has a well-documented effect on human mate preferences. In general, both sexes prefer opposite-sex romantic relationships in which the man is taller than the woman, while individual preferences for height are affected by a person’s own height. Research in human mate choice has demonstrated that attraction to facial characteristics, such as facial adiposity, may reflect references for body characteristics. Here, we tested preferences for facial cues to height. In general, incre...

  9. Assessment of the Sustainable Development Capacity with the Entropy Weight Coefficient Method

    Directory of Open Access Journals (Sweden)

    Qingsong Wang

    2015-10-01

    Full Text Available Sustainable development is widely accepted in the world. How to reflect the sustainable development capacity of a region is an important issue for enacting policies and plans. An index system for capacity assessment is established by employing the Entropy Weight Coefficient method. The results indicate that the sustainable development capacity of Shandong Province is improving in terms of its economy subsystem, resource subsystem, and society subsystem whilst degrading in its environment subsystem. Shandong Province has shown the general trend towards sustainable development. However, the sustainable development capacity can be constrained by the resources such as energy, land, water, as well as environmental protection. These issues are induced by the economy development model, the security of energy supply, the level of new energy development, the end-of-pipe control of pollution, and the level of science and technology commercialization. Efforts are required to accelerate the development of the tertiary industry, the commercialization of high technology, the development of new energy and renewable energy, and the structure optimization of energy mix. Long-term measures need to be established for the ecosystem and environment protection.

  10. Decision Support System to Choose Digital Single Lens Camera with Simple Additive Weighting Method

    Directory of Open Access Journals (Sweden)

    Tri Pina Putri

    2016-11-01

    Full Text Available One of the technologies that evolve today is Digital Single Lens Reflex (DSLR camera. The number of products makes users have difficulties to choose the appropriate camera based on their criteria. Users may utilize several ways to help them choosing the intended camera such as using magazine, internet, and other media. This paper discusses about a web based decision support system to choose cameras by using SAW (Simple Additive Weighting method in order to make the decision process more effective and efficient. This system is expected to give recommendations about the camera which is appropriate with the user’s need and criteria based on the cost, the resolution, the feature, the ISO, and the censor. The system was implemented by using PHP and MySQL. Based on the result of questionnaire distributed to 20 respondents, 60% respondents agree that this decision support system can help users to choose the appropriate camera DSLR in accordance with the user’s need, 60% of respondents agree that this decision support system is more effective to choose DSLR camera and 75% of respondents agree that this system is more efficient. In addition, 60.55% of respondents agree that this system has met 5 Es Usability Framework.

  11. Comparison among T1-weighted magnetic resonance imaging, modified dixon method, and magnetic resonance spectroscopy in measuring bone marrow fat.

    Science.gov (United States)

    Shen, Wei; Gong, Xiuqun; Weiss, Jessica; Jin, Ye

    2013-01-01

    An increasing number of studies are utilizing different magnetic resonance (MR) methods to quantify bone marrow fat due to its potential role in osteoporosis. Our aim is to compare the measurements of bone marrow fat among T1-weighted magnetic resonance imaging (MRI), modified Dixon method (also called fat fraction MRI (FFMRI)), and magnetic resonance spectroscopy (MRS). Contiguous MRI scans were acquired in 27 Caucasian postmenopausal women with a modified Dixon method (i.e., FFMRI). Bone marrow adipose tissue (BMAT) of T1-weighted MRI and bone marrow fat fraction of the L3 vertebra and femoral necks were quantified using SliceOmatic and Matlab. MRS was also acquired at the L3 vertebra. Correlation among the three MR methods measured bone marrow fat fraction and BMAT ranges from 0.78 to 0.88 (P BMAT measured by T1-weighted MRI and bone marrow fat fraction measured by modified FFMRI is 0.86 (P < 0.001) in femoral necks. There are good correlations among T1-weighted MRI, FFMRI, and MRS for bone marrow fat quantification. The inhomogeneous distribution of bone marrow fat, the threshold segmentation of the T1-weighted MRI, and the ambiguity of the FFMRI may partially explain the difference among the three methods.

  12. Weight-loss strategies used by baby boomer men: a mixed methods approach.

    Science.gov (United States)

    James, D C S; Wirth, C K; Harville, C; Efunbumi, O

    2016-04-01

    Baby Boomer men (those born in 1946-1964) are becoming obese at an earlier age compared to previous generations. The present study aimed to identify weight-loss strategies used by Baby Boomer men, to determine whether those strategies varied by weight status and to explore their dieting experiences. The study used a cross-sectional survey of 211 men and 20 in-depth interviews. Men had a mean (SD) body mass index (BMI) of 29.35 (5.07) kg m(-2), with 82% being overweight or obese. Fifty-six percent were currently trying to lose weight. Healthy weight-loss strategies included reducing portions, increasing physical activity, cutting back on fried foods, cutting back on sweets, cutting back on alcohol, using meal replacement drinks/bars and joining a weight-loss programme. Unhealthy strategies included skipping meals and using over-the-counter 'diet pills'. Men who reduced portions, skipped meals, cut back on sweets, joined a weight-loss programme and used diet pills had significantly higher BMIs than men who said they did not (P < 0.05 for all). Interviews revealed that older men struggle to lose weight, 'I've been struggling for the last 2-3 years'. 'The last time I really tried to lose weight I stayed on the diet for just a day or two'. Wives were considered essential to their weight management success. Men used a do-it-yourself weight-loss approach using both healthy and unhealthy strategies. Obese men were more likely to use unhealthy practices than overweight men. © 2015 The British Dietetic Association Ltd.

  13. Variance of a potential of mean force obtained using the weighted histogram analysis method.

    Science.gov (United States)

    Cukier, Robert I

    2013-11-27

    A potential of mean force (PMF) that provides the free energy of a thermally driven system along some chosen reaction coordinate (RC) is a useful descriptor of systems characterized by complex, high dimensional potential energy surfaces. Umbrella sampling window simulations use potential energy restraints to provide more uniform sampling along a RC so that potential energy barriers that would otherwise make equilibrium sampling computationally difficult can be overcome. Combining the results from the different biased window trajectories can be accomplished using the Weighted Histogram Analysis Method (WHAM). Here, we provide an analysis of the variance of a PMF along the reaction coordinate. We assume that the potential restraints used for each window lead to Gaussian distributions for the window reaction coordinate densities and that the data sampling in each window is from an equilibrium ensemble sampled so that successive points are statistically independent. Also, we assume that neighbor window densities overlap, as required in WHAM, and that further-than-neighbor window density overlap is negligible. Then, an analytic expression for the variance of the PMF along the reaction coordinate at a desired level of spatial resolution can be generated. The variance separates into a sum over all windows with two kinds of contributions: One from the variance of the biased window density normalized by the total biased window density and the other from the variance of the local (for each window's coordinate range) PMF. Based on the desired spatial resolution of the PMF, the former variance can be minimized relative to that from the latter. The method is applied to a model system that has features of a complex energy landscape evocative of a protein with two conformational states separated by a free energy barrier along a collective reaction coordinate. The variance can be constructed from data that is already available from the WHAM PMF construction.

  14. Weights of evidence method for landslide susceptibility mapping in Tangier, Morocco

    Directory of Open Access Journals (Sweden)

    Bousta Mahfoud

    2018-01-01

    Full Text Available Tangier region is known by a high density of mass movements which cause several human and economic losses. The goal of this paper is to assess the landslide susceptibility of Tangier using the Weight of Evidence method (WofE. The method is founded on the principle that an event (landslide is more likely to occur based on the relationship between the presence or absence of a predictive variable (predisposing factors and the occurrence of this event. The inventory, description and analysis of mass movements were prepared. Then the main factors governing their occurrence (lithology, fault, slope, elevation, exposure, drainage and land use were mapped before applying WofE. Finally, the ROC curves were established and the areas under curves (AUC were calculated to evaluate the degree of fit of the model and to choose the best landslide susceptibility zonation. The prediction accuracy was found to be 70%. Obtained susceptibility map shows that 60% of inventoried landslides are in the high to very high susceptibility zones, which is very satisfactory for the validation of the adopted model and the obtained results. These zones are mainly located in the N-E and E part of the Tangier region in the soft and fragile facies of the marls and clays of the Tangier unit, where landuse is characterized by dominance of arable and agricultural land (lack of forest cover. From a purely spatial point of view, the localization of these two classes of susceptibility is completely corresponding to the ground truth data, that is to say that all the environmental and anthropogenic conditions are in place for making this area prone to landslide hazards. The obtained map is a decision-making tool for presenting, comparing and discussing development and urban scenarios in Tangier. These results fall within the context of sustainable development and will help to mitigate the socio-economic impacts usually observed when landslides are triggered.

  15. Acceptability of financial incentives for maintenance of weight loss in mid-older adults: a mixed methods study.

    Science.gov (United States)

    McGill, Bronwyn; O'Hara, Blythe J; Grunseit, Anne C; Bauman, Adrian; Osborne, Dale; Lawler, Luke; Phongsavan, Philayrath

    2018-02-13

    Health insurers worldwide implement financial incentive schemes to encourage health-related behaviours, including to facilitate weight loss. The maintenance of weight loss is a public health challenge, and as non-communicable diseases become more prevalent with increasing age, mid-older adults could benefit from programs which motivate weight loss maintenance. However, little is understood about their perceptions of using financial incentives to maintain weight loss. We used mixed methods to explore the attitudes and views of participants who had completed an Australian weight loss and lifestyle modification program offered to overweight and obese health insurance members with weight-related chronic diseases, about the acceptability and usefulness of different types of financial incentives to support weight loss maintenance. An online survey was completed by 130 respondents (mean age = 64 years); and a further 28 participants (mean age = 65 years) attended six focus groups. Both independent samples of participants supported a formalised maintenance program. Online survey respondents reported that non-cash (85.2%) and cash (77%) incentives would be potentially motivating; but only 40.5% reported that deposit contracts would motivate weight loss maintenance. Results of in-depth discussions found overall low support for any type of financial incentive, but particularly deposit contracts and lotteries. Some participants expressed that improved health was of more value than a monetary incentive and that they felt personally responsible for their own health, which was at odds with the idea of financial incentives. Others suggested ongoing program and peer support as potentially useful for weight loss maintenance. If financial incentives are considered for mid-older Australian adults in the health insurance setting, program planners will need to balance the discordance between participant beliefs about the individual responsibility for health and their desire

  16. Agronomic characters and lodging resistance of plant height mutants of rice

    International Nuclear Information System (INIS)

    Zhang Zhonggui; Wu Yuejin; Liu Binmei; Xu Xue; Zhang Lili; Wang Min

    2010-01-01

    Fourteen plant height mutants of Nipponbare were used to study the effect of plant height on the agronomic characters and lodging resistance. The results indicated that the plant height was positively correlated with spike length, third internode length, height of gravity center, fresh weight of main stem, dry weight of main stem, thousand-grain weight, grain-yield per plant and biological yield, and the second internode length. Meanwhile, plant height played an important role in lodging resistance, it was significantly positively correlated with lodging index and negatively correlated with bending moment and culm type index. The correlation between agronomic characters and lodging resistance showed that several agronomic characters had strong impact on the lodging resistance, such as spike length, height of gravity center, basal internode length ( first and second internode), fresh and dry weight of main stem, dry weight of basal internode, seed setting, thousand-grain weight, grain-weight per plant and biological yield. (authors)

  17. Aircraft height estimation using 2-D radar

    CSIR Research Space (South Africa)

    Hakl, H

    2010-01-01

    Full Text Available A method to infer height information from an aircraft tracked with a single 2-D search radar is presented. The method assumes level flight in the target aircraft and a good estimate of the speed of the aircraft. The method yields good results...

  18. Sexual Orientation, Objective Height, and Self-Reported Height.

    Science.gov (United States)

    Skorska, Malvina N; Bogaert, Anthony F

    2017-01-01

    Studies that have used mostly self-reported height have found that androphilic men and women are shorter than gynephilic men and women, respectively. This study examined whether an objective height difference exists or whether a psychosocial account (e.g., distortion of self-reports) may explain these putative height differences. A total of 863 participants, recruited at a Canadian university, the surrounding region, and through lesbian, gay, bisexual, and transgender (LGBT) events across Canada, self-reported their height and had their height measured. Androphilic men were shorter, on average, than gynephilic men. There was no objective height difference between gynephilic, ambiphilic, and androphilic women. Self-reported height, statistically controlling for objective height, was not related to sexual orientation. These findings are the first to show an objective height difference between androphilic and gynephilic men. Also, the findings suggest that previous studies using self-reported height found part of a true objective height difference between androphilic and gynephilic men. These findings have implications for existing biological theories of men's sexual orientation development.

  19. The effects of radiation therapy on height and spine MRI characteristics in children with neuroblastoma

    International Nuclear Information System (INIS)

    Yu, Jeong Il; Lim, Do Hoon; Jung, Sang Hoon; Sung, Ki Woong; Yoo, So-Young; Nam, Heerim

    2015-01-01

    Purpose: To investigate the effect of radiotherapy (RT) on height and spine using magnetic resonance imaging (MRI) analysis in children with neuroblastoma and to identify parameters related to patient height. Methods and materials: We performed a retrospective cohort study of neuroblastoma patients treated between January 1997 and December 2007. Twenty-seven children were enrolled. Whole spine MRI was completed and height percentiles were compared with national growth charts. Results: The median ages were 28, 43, and 126 months at diagnosis, RT, and analysis, respectively. All of the enrolled children received local RT, and 15 patients received total body irradiation (TBI). Median growth percentiles were 67.0, 54.0, and 4.9 at diagnosis, RT, and analysis, respectively. The number of irradiated vertebrae (P = 0.009) and having undergone TBI (P = 0.03) were significantly associated with shorter stature. Among the MRI parameters for irradiated vertebrae, signal intensity was higher (P = 0.05) and more heterogeneous (P = 0.02) in T1-weighted images and roundness was lower (P = 0.03) in T2-weighted images. Conclusions: Height of children with neuroblastoma was significantly affected by RT. The number of irradiated vertebrae and having undergone TBI were significantly associated with lower height. Irradiated spine showed changes in both signal and shape on MRI

  20. Estimativa do Peso Fetal: Comparação Entre um Método Clínico e a Ultra-Sonografia Estimation of Fetal Weight: Comparison Between a Clinical Method and Ultrasonography

    Directory of Open Access Journals (Sweden)

    Alexandre Faisal Cury

    1998-12-01

    Full Text Available Objetivo: avaliar a validade da estimativa do peso fetal por método baseado na altura uterina - regra de Johnson. Métodos: foram estudadas 101 gestantes e seus recém-nascidos (RN, estimando-se o peso fetal pela utilização da regra de Johnson adaptada, que consiste em aplicação clínica de modelo matemático para cálculo do peso fetal baseado na altura uterina e na altura da apresentação fetal. O peso estimado foi obtido no dia do parto e foi comparado com o peso observado ao nascer, que constituiu o controle da análise da validade do método empregado. Na mesma data foi realizada ultra-sonografia obstétrica (US detalhada, que inclui cálculo do peso fetal pela aplicação das tabelas de Sheppard, e este peso, estimado pela US, foi comparado ao peso observado ao nascer. Resultados: os resultados destas comparações mostraram que a estimativa clínica empregada nesta casuística tem valor semelhante à US para avaliação do peso ao nascer: a margem de acerto do método clínico com variações de 5%, 10% e 15% entre peso estimado e peso observado foi de 55,3%, 73% e 86,7% respectivamente, e, para o US, de 60,7%, 75,4% e 91,1%, respectivamente. Conclusões:quando comparados, estes valores não se mostraram diferentes do ponto de vista estatístico, permitindo concluir-se que a avaliação clínica mostra acurácia semelhante à da US para o cálculo do peso ao nascer.Purpose: to assess the validity of fetal weight estimation by a method based on uterine height -- Johnson's rule. Methods: one hundred and one pregnant women and their newborn children were studied. The fetal weight was estimated using an adaptation of Johnson's rule, which consists of the clinical application of a mathematical model to calculate the fetal weight based on the uterine height and the height of fetal presentation. The estimated weight was obtained on the day of delivery and was compared to the weight observed after birth. This, in turn, was the control of

  1. Methods used to conduct the pan-European Union survey on consumer attitudes to physical activity, body weight and health.

    Science.gov (United States)

    Kearney, J M; Kearney, M J; McElhone, S; Gibney, M J

    1999-03-01

    The purpose of conducting this survey was to identify data on consumer attitudes towards and beliefs about physical activity, body weight and health among the 15 countries of the EU. A cross-sectional study to get a picture of the attitudes to physical activity, body weight and health in the EU. For this, it was considered important that samples be nationally representative so that inferences drawn from the data could be applied to the population in each country as well as to the EU population as a whole. Using a non-probability sampling method employing quota controls (and the national weight) we obtained large sample sizes from each country which were nationally representative in terms of the variables age, sex and regional distribution. To ensure samples were truly nationally representative a national weight was used when analysing the data using the same characteristics as those used to define quotas. When examining pooled estimates for the total EU sample a population weight was applied. In total, 15,239 subjects aged 15 years and upwards in the EU completed the survey. This article gives details on the methods used in carrying out the survey from design of the questionnaire to sample selection, questionnaire administration and analysis of the data. The methods and their limitations are discussed.

  2. Molecular Weights of Bovine and Porcine Heparin Samples: Comparison of Chromatographic Methods and Results of a Collaborative Survey

    Directory of Open Access Journals (Sweden)

    Sabrina Bertini

    2017-07-01

    Full Text Available In a collaborative study involving six laboratories in the USA, Europe, and India the molecular weight distributions of a panel of heparin sodium samples were determined, in order to compare heparin sodium of bovine intestinal origin with that of bovine lung and porcine intestinal origin. Porcine samples met the current criteria as laid out in the USP Heparin Sodium monograph. Bovine lung heparin samples had consistently lower average molecular weights. Bovine intestinal heparin was variable in molecular weight; some samples fell below the USP limits, some fell within these limits and others fell above the upper limits. These data will inform the establishment of pharmacopeial acceptance criteria for heparin sodium derived from bovine intestinal mucosa. The method for MW determination as described in the USP monograph uses a single, broad standard calibrant to characterize the chromatographic profile of heparin sodium on high-resolution silica-based GPC columns. These columns may be short-lived in some laboratories. Using the panel of samples described above, methods based on the use of robust polymer-based columns have been developed. In addition to the use of the USP’s broad standard calibrant for heparin sodium with these columns, a set of conditions have been devised that allow light-scattering detected molecular weight characterization of heparin sodium, giving results that agree well with the monograph method. These findings may facilitate the validation of variant chromatographic methods with some practical advantages over the USP monograph method.

  3. Development of gel-filter method for high enrichment of low-molecular weight proteins from serum.

    Directory of Open Access Journals (Sweden)

    Lingsheng Chen

    Full Text Available The human serum proteome has been extensively screened for biomarkers. However, the large dynamic range of protein concentrations in serum and the presence of highly abundant and large molecular weight proteins, make identification and detection changes in the amount of low-molecular weight proteins (LMW, molecular weight ≤ 30kDa difficult. Here, we developed a gel-filter method including four layers of different concentration of tricine SDS-PAGE-based gels to block high-molecular weight proteins and enrich LMW proteins. By utilizing this method, we identified 1,576 proteins (n = 2 from 10 μL serum. Among them, 559 (n = 2 proteins belonged to LMW proteins. Furthermore, this gel-filter method could identify 67.4% and 39.8% more LMW proteins than that in representative methods of glycine SDS-PAGE and optimized-DS, respectively. By utilizing SILAC-AQUA approach with labeled recombinant protein as internal standard, the recovery rate for GST spiked in serum during the treatment of gel-filter, optimized-DS, and ProteoMiner was 33.1 ± 0.01%, 18.7 ± 0.01% and 9.6 ± 0.03%, respectively. These results demonstrate that the gel-filter method offers a rapid, highly reproducible and efficient approach for screening biomarkers from serum through proteomic analyses.

  4. Molecular Weights of Bovine and Porcine Heparin Samples: Comparison of Chromatographic Methods and Results of a Collaborative Survey.

    Science.gov (United States)

    Bertini, Sabrina; Risi, Giulia; Guerrini, Marco; Carrick, Kevin; Szajek, Anita Y; Mulloy, Barbara

    2017-07-19

    In a collaborative study involving six laboratories in the USA, Europe, and India the molecular weight distributions of a panel of heparin sodium samples were determined, in order to compare heparin sodium of bovine intestinal origin with that of bovine lung and porcine intestinal origin. Porcine samples met the current criteria as laid out in the USP Heparin Sodium monograph. Bovine lung heparin samples had consistently lower average molecular weights. Bovine intestinal heparin was variable in molecular weight; some samples fell below the USP limits, some fell within these limits and others fell above the upper limits. These data will inform the establishment of pharmacopeial acceptance criteria for heparin sodium derived from bovine intestinal mucosa. The method for MW determination as described in the USP monograph uses a single, broad standard calibrant to characterize the chromatographic profile of heparin sodium on high-resolution silica-based GPC columns. These columns may be short-lived in some laboratories. Using the panel of samples described above, methods based on the use of robust polymer-based columns have been developed. In addition to the use of the USP's broad standard calibrant for heparin sodium with these columns, a set of conditions have been devised that allow light-scattering detected molecular weight characterization of heparin sodium, giving results that agree well with the monograph method. These findings may facilitate the validation of variant chromatographic methods with some practical advantages over the USP monograph method.

  5. A method to reduce the suppression of relevant pulses in pulse weight discriminators

    International Nuclear Information System (INIS)

    Schwartz, P.

    1975-01-01

    The pulse height analyzer is used, for instance, with proportional counters. Pulses are broken down into amplitude ranges in accordance with their maximum amplitudes. In pulse height analyzers with real time analog-digital conversion only one deadtime is needed for the respective range selected. For this purpose, all discriminator thresholds of the amplitude stores connected parallel are actuated as an input pulse arrives. The leading edges of the discriminator signals set the amplitude range flip-flop. Only the flip-flop circuit of the maximum amplitude range reached remains set whilst all the others are erased. The trailing edge of the discriminator signals actuates the evaluation of the information stored by the flip-flop circuit selected. It triggers a pulse extender and resets the flip-flop selected. Therefore, only the amplitude range selected needs a deadtime. The pulse extender in addition reduces the processing time of the analyzer by the output pulse length. The characteristic used for the trailing edge is the backward count of the real time analog-digital converter. (DG/RF) [de

  6. ESTIMATION OF HEIGHT OF EUCALYPTUS TREES WITH NEUROEVOLUTION OF AUGMENTING TOPOLOGIES (NEAT

    Directory of Open Access Journals (Sweden)

    Daniel Henrique Breda Binoti

    2018-02-01

    Full Text Available ABSTRACT The aim of this study was to evaluate the method of neuroevolution of augmenting topologies (NEAT to adjust the weights and the topology of artificial neural networks (ANNs in the estimation of tree height in a clonal population of eucalyptus, and compare with estimates obtained by a hypsometric regression model. To estimate the total tree height (Ht, the RNAs and the regression model, we used as variables a diameter of 1.3 m height (dbh and the dominant height (Hd. The RNAs were adjusted and applied to the computer system NeuroForest, varying the size of the initial population (the genetic algorithm parameter and the density of initial connections. Estimates of the total height of the trees obtained with the use of RNA and the regression model were evaluated based on the correlation coefficient, the percentage of errors scatter plot, the percentage frequency histogram of percentage errors, and the root mean square error (root mean square error - RMSE. Various settings which resulted in superior statistics to the hypsometric regression model were found. Connections had the highest correlation and the lowest RMSE% with a population size value of 300 and an initial density of 0.1 RNA. The NEAT methodology proved effective in estimating the height of trees in clonal population of eucalyptus.

  7. A method for measuring quality of life through subjective weighting of functional status.

    Science.gov (United States)

    Stineman, Margaret G; Wechsler, Barbara; Ross, Richard; Maislin, Greg

    2003-04-01

    To apply a new tool to understand the quality of life (QOL) implications of patients' functional status. Results from the Features-Resource Trade-Off Game were used to form utility weights by ranking functional activities by the relative value of achieving independence in each activity compared with all other component activities. The utility weights were combined with patients' actual levels of performance across the same activities to produce QOL-weighted functional status scores and to form "value rulers" to order activities by perceived importance. Persons with severe disabilities living in the community and clinicians practicing in various rehabilitation disciplines. Two panels of 5 consumers with disabilities and 2 panels of 5 rehabilitation clinicians. The 4 panels played the Features Resource Trade-Off Game by using the FIMT(TM) instrument definitions. Utility weights for each of the 18 FIM items, QOL-weighted FIM scores, and value rulers. All 4 panels valued the achievement of independence in cognitive and communication activities more than independence in physical activities. Consequently, the unweighted FIM scores of patients who have severe physical disabilities but relatively intact cognitive skills will underestimate QOL, while inflating QOL in those with low levels of independence in cognition and communication but higher physical function. Independence in some activities is more valued than in others; thus, 2 people with the same numeric functional status score could experience very different QOL. QOL-weighted functional status scores translate objectively measured functional status into its subjective meaning. This new technology for measuring subjective function-related QOL has a variety of applications to clinical, educational, and research practices.

  8. Calculation of the neutron importance and weighted neutron generation time using MCNIC method in accelerator driven subcritical reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hassanzadeh, M. [Nuclear Science and Technology Research Institute, AEOI, Tehran, Islamic Republic of Iran (Iran, Islamic Republic of); Feghhi, S.A.H., E-mail: a_feghhi@sbu.ac.ir [Department of Radiation Application, Shahid Beheshti University, G.C., Tehran, Islamic Republic of Iran (Iran, Islamic Republic of); Khalafi, H. [Nuclear Science and Technology Research Institute, AEOI, Tehran, Islamic Republic of Iran (Iran, Islamic Republic of)

    2013-09-15

    Highlights: • All reactor kinetic parameters are importance weighted quantities. • MCNIC method has been developed for calculating neutron importance in ADSRs. • Mean generation time has been calculated in spallation driven systems. -- Abstract: The difference between non-weighted neutron generation time (Λ) and the weighted one (Λ{sup †}) can be quite significant depending on the type of the system. In the present work, we will focus on developing MCNIC method for calculation of the neutron importance (Φ{sup †}) and importance weighted neutron generation time (Λ{sup †}) in accelerator driven systems (ADS). Two hypothetic bare and graphite reflected spallation source driven system have been considered as illustrative examples for this means. The results of this method have been compared with those obtained by MCNPX code. According to the results, the relative difference between Λ and Λ{sup †} is within 36% and 24,840% in bare and reflected illustrative examples respectively. The difference is quite significant in reflected systems and increases with reflector thickness. In Conclusion, this method may be used for better estimation of kinetic parameters rather than the MCNPX code because of using neutron importance function.

  9. Calculation of the neutron importance and weighted neutron generation time using MCNIC method in accelerator driven subcritical reactors

    International Nuclear Information System (INIS)

    Hassanzadeh, M.; Feghhi, S.A.H.; Khalafi, H.

    2013-01-01

    Highlights: • All reactor kinetic parameters are importance weighted quantities. • MCNIC method has been developed for calculating neutron importance in ADSRs. • Mean generation time has been calculated in spallation driven systems. -- Abstract: The difference between non-weighted neutron generation time (Λ) and the weighted one (Λ † ) can be quite significant depending on the type of the system. In the present work, we will focus on developing MCNIC method for calculation of the neutron importance (Φ † ) and importance weighted neutron generation time (Λ † ) in accelerator driven systems (ADS). Two hypothetic bare and graphite reflected spallation source driven system have been considered as illustrative examples for this means. The results of this method have been compared with those obtained by MCNPX code. According to the results, the relative difference between Λ and Λ † is within 36% and 24,840% in bare and reflected illustrative examples respectively. The difference is quite significant in reflected systems and increases with reflector thickness. In Conclusion, this method may be used for better estimation of kinetic parameters rather than the MCNPX code because of using neutron importance function

  10. The Effect of Head Mounted Display Weight and Locomotion Method on the Perceived Naturalness of Virtual Walking Speeds

    DEFF Research Database (Denmark)

    Nilsson, Niels Chr.; Serafin, Stefania; Nordahl, Rolf

    This poster details a study investigating the effect of Head Mounted Display (HMD) weight and locomotion method (Walking-In-Place and treadmill walking) on the perceived naturalness of virtual walking speeds. The results revealed significant main effects of movement type, but no significant effec...

  11. Linearly and nonlinearly optimized weighted essentially non-oscillatory methods for compressible turbulence

    Science.gov (United States)

    Taylor, Ellen Meredith

    Weighted essentially non-oscillatory (WENO) methods have been developed to simultaneously provide robust shock-capturing in compressible fluid flow and avoid excessive damping of fine-scale flow features such as turbulence. This is accomplished by constructing multiple candidate numerical stencils that adaptively combine so as to provide high order of accuracy and high bandwidth-resolving efficiency in continuous flow regions while averting instability-provoking interpolation across discontinuities. Under certain conditions in compressible turbulence, however, numerical dissipation remains unacceptably high even after optimization of the linear optimal stencil combination that dominates in smooth regions. The remaining nonlinear error arises from two primary sources: (i) the smoothness measurement that governs the application of adaptation away from the optimal stencil and (ii) the numerical properties of individual candidate stencils that govern numerical accuracy when adaptation engages. In this work, both of these sources are investigated, and corrective modifications to the WENO methodology are proposed and evaluated. Excessive nonlinear error due to the first source is alleviated through two separately considered procedures appended to the standard smoothness measurement technique that are designated the "relative smoothness limiter" and the "relative total variation limiter." In theory, appropriate values of their associated parameters should be insensitive to flow configuration, thereby sidestepping the prospect of costly parameter tuning; and this expectation of broad effectiveness is assessed in direct numerical simulations (DNS) of one-dimensional inviscid test problems, three-dimensional compressible isotropic turbulence of varying Reynolds and turbulent Mach numbers, and shock/isotropic-turbulence interaction (SITI). In the process, tools for efficiently comparing WENO adaptation behavior in smooth versus shock-containing regions are developed. The

  12. Forward-weighted CADIS method for variance reduction of Monte Carlo calculations of distributions and multiple localized quantities

    International Nuclear Information System (INIS)

    Wagner, J. C.; Blakeman, E. D.; Peplow, D. E.

    2009-01-01

    This paper presents a new hybrid (Monte Carlo/deterministic) method for increasing the efficiency of Monte Carlo calculations of distributions, such as flux or dose rate distributions (e.g., mesh tallies), as well as responses at multiple localized detectors and spectra. This method, referred to as Forward-Weighted CADIS (FW-CADIS), is a variation on the Consistent Adjoint Driven Importance Sampling (CADIS) method, which has been used for some time to very effectively improve the efficiency of Monte Carlo calculations of localized quantities, e.g., flux, dose, or reaction rate at a specific location. The basis of this method is the development of an importance function that represents the importance of particles to the objective of uniform Monte Carlo particle density in the desired tally regions. Implementation of this method utilizes the results from a forward deterministic calculation to develop a forward-weighted source for a deterministic adjoint calculation. The resulting adjoint function is then used to generate consistent space- and energy-dependent source biasing parameters and weight windows that are used in a forward Monte Carlo calculation to obtain approximately uniform statistical uncertainties in the desired tally regions. The FW-CADIS method has been implemented in the ADVANTG/MCNP framework and has been fully automated within the MAVRIC sequence of SCALE 6. Results of the application of the method to enabling the calculation of dose rates throughout an entire full-scale pressurized-water reactor facility are presented and discussed. (authors)

  13. Correlations between some physiographic factors and diameter, height and cone characteristics in stone pine (Pinus pinea L. afforestation areas in Balıkesir-Burhaniye region

    Directory of Open Access Journals (Sweden)

    Ali Ömer Üçler

    2017-11-01

    Full Text Available In this study, effects of some physiographic factors (aspect, slope and elevation on breast diameter, height and cone properties (cone weight, number of cones, cone width and cone length in stone pine (Pinus pinea L. afforestation areas in Balıkesir-Burhaniye region were investigated. To determine to effects of physiographic conditions, study area is separated according to aspect, slope and elevation groups. Aspect is separated two groups which are shady aspect (B1 and sunny aspect (B2. Slope is separated two groups which are small from 36 percent (E1 and big from 36 percent (E2. Elevation also is separated two groups which are under 400 meters (Y1 and over 400 meters (Y2. Sample areas were scattering to land classifications by using Stratified Sampling Method. Thus, each aspect, slope and elevation classifications were obtained from sample area where are provided from 32 different areas. Tree heights, the diameter at breast height and cone number were measured on saplings. In addition, in each sample area five Pinus pinea trees were selected. It was measured cone diameter, cone height and air-dries weight values of cones which are picked from selecting trees. According to statistical analysis results, aspect effects to tree heights, cone number and cone weight; slope effects the diameter at breast height, cone number and cone diameter; elevation effects the diameter at breast height, tree height, cone number and cone weight. In terms of tree height and diameter values; the highest average breast height diameter was found in the B1E1Y1 with 13.6 cm, and the highest average height value was found in the B2E2Y2 by interaction. In terms of cone characteristics; with the highest average cone number of 8.5 in B1E1Y1, the highest mean cone weight in B1E1Y1 with 232 gr and the highest cone diameter in B2E2Y1 with 5.4 cm. According to the results of correlation analysis; it was determined that slope and elevation factors have positive effect on breast

  14. Height premium for job performance.

    Science.gov (United States)

    Kim, Tae Hyun; Han, Euna

    2017-08-01

    This study assessed the relationship of height with wages, using the 1998 and 2012 Korean Labor and Income Panel Study data. The key independent variable was height measured in centimeters, which was included as a series of dummy indicators of height per 5cm span (wages to assess the heterogeneity in the height-wage relationship, across the conditional distribution of monthly wages. We found a non-linear relationship of height with monthly wages. For men, the magnitude of the height wage premium was overall larger at the upper quantile of the conditional distribution of log monthly wages than at the median to low quantile, particularly in professional and semi-professional occupations. The height-wage premium was also larger at the 90th quantile for self-employed women and salaried men. Our findings add a global dimension to the existing evidence on height-wage premium, demonstrating non-linearity in the association between height and wages and heterogeneous changes in the dispersion and direction of the association between height and wages, by wage level. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Challenges in Defining Tsunami Wave Height

    Science.gov (United States)

    Stroker, K. J.; Dunbar, P. K.; Mungov, G.; Sweeney, A.; Arcos, N. P.

    2017-12-01

    The NOAA National Centers for Environmental Information (NCEI) and co-located World Data Service for Geophysics maintain the global tsunami archive consisting of the historical tsunami database, imagery, and raw and processed water level data. The historical tsunami database incorporates, where available, maximum wave heights for each coastal tide gauge and deep-ocean buoy that recorded a tsunami signal. These data are important because they are used for tsunami hazard assessment, model calibration, validation, and forecast and warning. There have been ongoing discussions in the tsunami community about the correct way to measure and report these wave heights. It is important to understand how these measurements might vary depending on how the data were processed and the definition of maximum wave height. On September 16, 2015, an 8.3 Mw earthquake located 48 km west of Illapel, Chile generated a tsunami that was observed all over the Pacific region. We processed the time-series water level data for 57 tide gauges that recorded this tsunami and compared the maximum wave heights determined from different definitions. We also compared the maximum wave heights from the NCEI-processed data with the heights reported by the NOAA Tsunami Warning Centers. We found that in the near field different methods of determining the maximum tsunami wave heights could result in large differences due to possible instrumental clipping. We also found that the maximum peak is usually larger than the maximum amplitude (½ peak-to-trough), but the differences for the majority of the stations were Warning Centers. Since there is currently only one field in the NCEI historical tsunami database to store the maximum tsunami wave height, NCEI will consider adding an additional field for the maximum peak measurement.

  16. Relationship between volition, physical activity and weight loss maintenance: Study rationale, design, methods and baseline characteristics

    DEFF Research Database (Denmark)

    Dandanell, Sune; Elbe, Anne-Marie; Pfister, Gertrud Ursula

    2017-01-01

    ) for an interdisciplinary prospective study with follow-up. The change in lifestyle and weight loss is promoted via a 3-month intensive lifestyle intervention at a private health school. The intervention consists of supervised training (1–3 hours/day), a healthy hypo-caloric diet (−500 to −700 kCal/day) and education...

  17. Cerebral Effects of Targeted Temperature Management Methods Assessed by Diffusion-Weighted Magnetic Resonance Imaging

    DEFF Research Database (Denmark)

    Grejs, Anders Morten; Gjedsted, Jakob; Pedersen, Michael

    2016-01-01

    The aim of this randomized porcine study was to compare surface targeted temperature management (TTM) to endovascular TTM evaluated by cerebral diffusion-weighted magnetic resonance imaging (MRI): apparent diffusion coefficient (ADC), and by intracerebral/intramuscular microdialysis. It is well k...

  18. Drop weight impact strength measurement method for porous concrete using laser doppler velocimetry

    NARCIS (Netherlands)

    Agar-Ozbek, A.S.; Weerheijm, J.; Schlangen, E.; Breugel, K. van

    2012-01-01

    In this study, an experimental configuration that reveals the dynamic response of porous concretes in a drop weight impact test was introduced. Through the measurement of particle velocity at the interface, between the impactor and the concrete target, the dynamic response was obtained in an easily

  19. The taking of Lucas Heights

    International Nuclear Information System (INIS)

    Sandilands, B.

    1993-01-01

    Plans for a new research reactor at Lucas Heights have sparked a 'civil war' in New South Wales. The author considers the arguments. The leading antagonists are the local government body - The Sutherland Shire Council, Greenpeace, and the Sutherland Shire Environment Centre. Many of the economic benefits claimed for the existing and proposed replacement reactor have been tagged with question marks. However, ANSTO is confident of refuting claims that the money could be better spent on alternative methods of producing medical isotopes and neutron streams for industry or research, such as particle accelerators. If ANSTO's critics have their way, non-reactor-dependent work like the laser enrichment project could continue without the alleged hazards of sustained nuclear fission. If ANSTO wins the day, a far more efficient reactor will be built which is capable of keeping pace with the emerging nuclear industries of Asia. ills

  20. Derivation of weighting factors for cost and radiological impact for use in comparison of waste management methods

    International Nuclear Information System (INIS)

    Allen, P.T.; Lee, T.R.

    1991-01-01

    Nuclear waste management decisions are complex, and must include considerations of cost and social factors in addition to dose limitation. Decision-aiding techniques, such as multi-attribute analysis, can assist in structuring the problem and can icorporate as many factors, or attributes, as required. However, the relative weights of such attributes need to be established. Methods were devised which could be compared with one another. These were questionnaire-based but, in order to examine the possible influence of the measurement procedures on the results, two of the methods were combined in an experimental design. The two direct methods for obtaining weights (the conventional rating scales and the direct rating task) showed good agreement and yielded different values for separate social groups, such as industrial employees and lay public. The main conclusion is that the elicitation of weighting factors from the public is possible and that the resulting weights are meaningful and could have significant effects on the choice of waste management options

  1. Effect of administration method, animal weight and age on the intranasal delivery of drugs to the brain.

    Science.gov (United States)

    Krishnan, Jishnu K S; Arun, Peethambaran; Chembukave, Bhadra; Appu, Abhilash P; Vijayakumar, Nivetha; Moffett, John R; Puthillathu, Narayanan; Namboodiri, Aryan M A

    2017-07-15

    The intranasal route of administration has proven to be an effective method for bypassing the blood brain barrier and avoiding first pass hepatic metabolism when targeting drugs to the brain. Most small molecules gain rapid access to CNS parenchyma when administered intranasally. However, bioavailability is affected by various factors ranging from the molecular weight of the drug to the mode of intranasal delivery. We examined the effects of animal posture, intranasal application method and animal weight and age on the delivery of radiolabeled pralidoxime ( 3 H-2-PAM) to the brain of rats. We found that using upright vs. supine posture did not significantly affect 3 H-2-PAM concentrations in different brain regions. Older animals with higher weights required increased doses to achieve the same drug concentration throughout the brain when compared to young animals with lower body weights. The use of an intranasal aerosol propelled delivery device mainly increased bioavailability in the olfactory bulbs, but did not reliably increase delivery of the drug to various other brain regions, and in some regions of the brain delivered less of the drug than simple pipette administration. In view of the emerging interest in the use of intranasal delivery of drugs to combat cognitive decline in old age, we tested effectiveness in very old rats and found the method to be as effective in the older rats. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Predicting vertical jump height from bar velocity.

    Science.gov (United States)

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-06-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

  3. Human-centred methods in the design of an e-health solution for patients undergoing weight loss treatment

    DEFF Research Database (Denmark)

    Das, Anita; Svanæs, Dag

    2013-01-01

    Background and objective Patients undergoing weight loss treatment require follow-up as part of the treatment process. E-health solutions may be used for this purpose. We have used an iterative design approach to develop a patient-centred e-health solution for patients undergoing weight loss...... in the design process. Our findings imply that involving stakeholders separately during specific human-centred activities is important in order to capture subtle, but critical aspects of the users’ requirements. Conclusion Applying human-centred methods in the design of e-health solutions requires...... that designers must take particular considerations when patients and healthcare professionals are involved in the design process. Keywords E-health; Participatory design; User-centred design; Obesity; Weight loss treatment...

  4. More practical critical height sampling.

    Science.gov (United States)

    Thomas B. Lynch; Jeffrey H. Gove

    2015-01-01

    Critical Height Sampling (CHS) (Kitamura 1964) can be used to predict cubic volumes per acre without using volume tables or equations. The critical height is defined as the height at which the tree stem appears to be in borderline condition using the point-sampling angle gauge (e.g. prism). An estimate of cubic volume per acre can be obtained from multiplication of the...

  5. Evaluation of physical property of light-weight soil with air foam using X-ray CT method

    International Nuclear Information System (INIS)

    Otani, Jun; Mukunoki, Toshifumi; Kikuchi, Yoshiaki

    2000-01-01

    The objective of this paper is to investigate the physical property of light-weight soil made of dredged slurry mixed with air foam and cement using X-ray CT method. In this study, not only the specimen made in laboratory but also the one sampled at the in-situ construction site were used and the property in the soil was visualized and the distributions of the density an air porosity were evaluated quantitatively using the results of CT scanning. Here, the method of image processing analysis was also used for this evaluation study. Based on the results obtained in this study, it is concluded that the X-ray CT method is a powerful tool even for geotechnical engineering and this makes not only the visualization but also the quantitative ion discussion possible for the light-weight soil with air foam. (author)

  6. Motor Responses and Weight Gaining in Neonates through Use of Two Methods of Earmuff and Receiving Silence in NICU

    Directory of Open Access Journals (Sweden)

    Z. Abdeyazdan

    2014-01-01

    Full Text Available Background and Aims. With technological advances in NICUs the survival rate of preterm infants has been increased. Because NICU environment is a potent source of stress for infants, its modification is an essential measure to decrease infants’ morbidity. The purposes of this study were to compare the effects of wearing earmuff and provision silence for infants on their motor responses and gaining weight. Methods. In a randomized clinical trial 96 preterm infants were enrolled. Their motor responses were evaluated for two consecutive days in the morning and afternoon shifts, in the groups of earmuff and silence, and at similar time points in the control group. Also their weight was measured at days 1 and 10. Results. In the two intervention groups, means of motor responses in infants were significantly less than in the control group, and weight gain of infants was more than the control group. However weight gain was more pronounced in the earmuff group. Conclusion. Both interventions led to decreasing number of motor responses and improvement of weight gain pattern, but these effects were more pronounced in earmuff group; thus because implementation of silence in NICUs has many barriers, it is suggested to use earmuff for preterm infants in these units. This trial obtained IRCT registration number IRCT2012092010812N2.

  7. Assessing the Causal Relationship of Maternal Height on Birth Size and Gestational Age at Birth: A Mendelian Randomization Analysis

    Science.gov (United States)

    Zhang, Ge; Bacelis, Jonas; Lengyel, Candice; Teramo, Kari; Hallman, Mikko; Helgeland, Øyvind; Johansson, Stefan; Myhre, Ronny; Sengpiel, Verena; Njølstad, Pål Rasmus; Jacobsson, Bo; Muglia, Louis

    2015-01-01

    Background Observational epidemiological studies indicate that maternal height is associated with gestational age at birth and fetal growth measures (i.e., shorter mothers deliver infants at earlier gestational ages with lower birth weight and birth length). Different mechanisms have been postulated to explain these associations. This study aimed to investigate the casual relationships behind the strong association of maternal height with fetal growth measures (i.e., birth length and birth weight) and gestational age by a Mendelian randomization approach. Methods and Findings We conducted a Mendelian randomization analysis using phenotype and genome-wide single nucleotide polymorphism (SNP) data of 3,485 mother/infant pairs from birth cohorts collected from three Nordic countries (Finland, Denmark, and Norway). We constructed a genetic score based on 697 SNPs known to be associated with adult height to index maternal height. To avoid confounding due to genetic sharing between mother and infant, we inferred parental transmission of the height-associated SNPs and utilized the haplotype genetic score derived from nontransmitted alleles as a valid genetic instrument for maternal height. In observational analysis, maternal height was significantly associated with birth length (p = 6.31 × 10−9), birth weight (p = 2.19 × 10−15), and gestational age (p = 1.51 × 10−7). Our parental-specific haplotype score association analysis revealed that birth length and birth weight were significantly associated with the maternal transmitted haplotype score as well as the paternal transmitted haplotype score. Their association with the maternal nontransmitted haplotype score was far less significant, indicating a major fetal genetic influence on these fetal growth measures. In contrast, gestational age was significantly associated with the nontransmitted haplotype score (p = 0.0424) and demonstrated a significant (p = 0.0234) causal effect of every 1 cm increase in maternal

  8. Height-Deterministic Pushdown Automata

    DEFF Research Database (Denmark)

    Nowotka, Dirk; Srba, Jiri

    2007-01-01

    We define the notion of height-deterministic pushdown automata, a model where for any given input string the stack heights during any (nondeterministic) computation on the input are a priori fixed. Different subclasses of height-deterministic pushdown automata, strictly containing the class...... of regular languages and still closed under boolean language operations, are considered. Several of such language classes have been described in the literature. Here, we suggest a natural and intuitive model that subsumes all the formalisms proposed so far by employing height-deterministic pushdown automata...

  9. POSSIBILITIES OF USING UNCONVENTIONAL METHODS AND DIETARY SUPPLEMENTS TO AFFECT WEIGHT GAINS OF CALVES

    Directory of Open Access Journals (Sweden)

    Lubo Zbransk

    2014-12-01

    Full Text Available Healthy and strong individuals are fundamental in every cattle breeding. The aim of this study was to find out which of these given supplement had the best influence on calf weight gain in the early period after weaning to milk nutrition. This research was carried out in cooperation with the farm in Haklovy Dvory. Calves were studied from March 2012 to February 2013. They were weaned into outdoor individual box after birth. There were added supplements into their ration in the first two weeks of life. Calves were partitioned according to the added supplement into three experimental groups and one control group. The first weight control of calves was after birth and the second weight control was at the age of thirty days. The average weight gain was calculated from the differences in these values. The best demonstrable effect was in the experimental Homeopathy and Prebiotics (Biopolym groups with the average increment of 26.9 kilograms, then in the experimental Probiotics (Lactovita group with the average increment of 26.1 kilograms. The last group was the Control one, there was not any change in the calves ration and their average increment was 23.5 kilograms. The results of the statistical evaluation was p = 0.0572 in the Biopolym group, p = 0.2570 in the Lactovita group and p = 0.2124 in the Homeopathy group versus the Control group. It can be concluded from the results of this study that calves had a positive reaction on the supplements added in the first days of life and these had a favourable effect on diarrhoea prevention. Prebiotics, homeopathic drugs and probiotics beneficially stimulate calvesdigestive system and, in general, they have a positive effect on the calves physiological condition.

  10. Agreement between measured height, and height predicted from ...

    African Journals Online (AJOL)

    lower limb measurements, such as knee height, as well as upper limb measures ... had with bone injuries/fractures affecting height or ulna length; and n = 1 had a ... and heels, buttocks and upper back in contact with the vertical surface of the .... found striking similarity in linear growth of infants to five-year- olds among all ...

  11. Recruitment of young adults into a randomized controlled trial of weight gain prevention: message development, methods, and cost.

    Science.gov (United States)

    Tate, Deborah F; LaRose, Jessica G; Griffin, Leah P; Erickson, Karen E; Robichaud, Erica F; Perdue, Letitia; Espeland, Mark A; Wing, Rena R

    2014-08-16

    Young adulthood (age 18 to 35) is a high-risk period for unhealthy weight gain. Few studies have recruited for prevention of weight gain, particularly in young adults. This paper describes the recruitment protocol used in the Study of Novel Approaches to Prevention (SNAP). We conducted extensive formative work to inform recruitment methods and message development. We worked with a professional marketing firm to synthesize major themes and subsequently develop age-appropriate messages for recruitment. A variety of approaches and channels were used across two clinical centers to recruit young adults who were normal or overweight (body mass index (BMI) 21 to 30 kg/m2) for a 3-year intervention designed to prevent weight gain. We tracked recruitment methods, yields, and costs by method. Logistic regression was used to identify recruitment methods that had the highest relative yield for subgroups of interest with covariate adjustments for clinic. The final sample of 599 participants (27% minority, 22% male) was recruited over a 19-month period of sustained efforts. About 10% of those who initially expressed interest via a screening website were randomized. The most common reason for ineligibility was already being obese (BMI >30 kg/m2). The top two methods for recruitment were mass mailing followed by email; together they were cited by 62% of those recruited. Television, radio, paid print advertising, flyers and community events each yielded fewer than 10% of study participants. Email was the most cost-effective method per study participant recruited. These findings can guide future efforts to recruit young adults and for trials targeting weight gain prevention. ClinicalTrials.gov NCT01183689 (registered 13 August 2010).

  12. The measurement of activity-weighted size distributions of radon progeny: methods and laboratory intercomparison studies

    International Nuclear Information System (INIS)

    Hopke, P.K.; Strydom, R.; Ramamurthi, M.; Knutson, E.O.; Tu, K.W.; Scofield, P.; Holub, R.F.; Cheng, Y.S.; Su, Y.F.; Winklmayr, W.

    1992-01-01

    Over the past 5 y, there have been significant improvements in measurement of activity-weighted size distributions of airborne radon decay products. The modification of screen diffusion batteries to incorporate multiple screens of differing mesh number, called graded screen arrays, have permitted improved size resolution below 10 nm such that the size distributions can now be determined down to molecular sized activities (0.5 nm). In order to ascertain the utility and reliability of such systems, several intercomparison tests have been performed in a 2.4 m3 radon chamber in which particles of varying size have been produced by introducing SO2 and H2O along with the radon to the chamber. In April 1988, intercomparison studies were performed between direct measurements of the activity-weighted size distributions as measured by graded screen arrays and an indirect measurement of the distribution obtained by measuring the number size distribution with a differential mobility analyzer and multiplying by the theoretical attachment rate. Good agreement was obtained in these measurements. A second set of intercomparison studies among a number of groups with graded screen array systems was made in April 1989 with the objective of resolving spectral structure below 10 nm. Again, generally good agreement among the various groups was obtained although some differences were noted. It is thus concluded that such systems can be constructed and can be useful in making routine measurements of activity-weighted size distributions with reasonable confidence in the results obtained

  13. Linear growth and final height characteristics in adolescent females with anorexia nervosa.

    Directory of Open Access Journals (Sweden)

    Dalit Modan-Moses

    Full Text Available OBJECTIVE: Growth retardation is an established complication of anorexia nervosa (AN. However, findings concerning final height of AN patients are inconsistent. The aim of this study was to assess these phenomena in female adolescent inpatients with AN. METHODS: We retrospectively studied all 211 female adolescent AN patients hospitalized in an inpatient eating disorders department from 1/1/1987 to 31/12/99. Height and weight were assessed at admission and thereafter routinely during hospitalization and follow-up. Final height was measured in 69 patients 2-10 years after discharge. Pre-morbid height data was available in 29 patients. RESULTS: Patients' height standard deviation scores (SDS on admission (-0.285±1.0 and discharge (-0.271±1.02 were significantly (p<0.001 lower than expected in normal adolescents. Patients admitted at age ≤13 years, or less than 1 year after menarche, were more severely growth-impaired than patients admitted at an older age, (p = 0.03. Final height SDS, available for 69 patients, was -0.258±1.04, significantly lower than expected in a normal population (p = 0.04, and was more severely compromised in patients who were admitted less than 1 year from their menarche. In a subgroup of 29 patients with complete growth data (pre-morbid, admission, discharge, and final adult height, the pre-morbid height SDS was not significantly different from the expected (-0.11±1.1, whereas heights at the other time points were significantly (p = 0.001 lower (-0.56±1.2, -0.52±1.2, and -0.6±1.2, respectively. CONCLUSIONS: Our findings suggest that whereas the premorbid height of female adolescent AN patients is normal, linear growth retardation is a prominent feature of their illness. Weight restoration is associated with catch-up growth, but complete catch-up is often not achieved.

  14. Multi-Gaussian fitting for pulse waveform using Weighted Least Squares and multi-criteria decision making method.

    Science.gov (United States)

    Wang, Lu; Xu, Lisheng; Feng, Shuting; Meng, Max Q-H; Wang, Kuanquan

    2013-11-01

    Analysis of pulse waveform is a low cost, non-invasive method for obtaining vital information related to the conditions of the cardiovascular system. In recent years, different Pulse Decomposition Analysis (PDA) methods have been applied to disclose the pathological mechanisms of the pulse waveform. All these methods decompose single-period pulse waveform into a constant number (such as 3, 4 or 5) of individual waves. Furthermore, those methods do not pay much attention to the estimation error of the key points in the pulse waveform. The estimation of human vascular conditions depends on the key points' positions of pulse wave. In this paper, we propose a Multi-Gaussian (MG) model to fit real pulse waveforms using an adaptive number (4 or 5 in our study) of Gaussian waves. The unknown parameters in the MG model are estimated by the Weighted Least Squares (WLS) method and the optimized weight values corresponding to different sampling points are selected by using the Multi-Criteria Decision Making (MCDM) method. Performance of the MG model and the WLS method has been evaluated by fitting 150 real pulse waveforms of five different types. The resulting Normalized Root Mean Square Error (NRMSE) was less than 2.0% and the estimation accuracy for the key points was satisfactory, demonstrating that our proposed method is effective in compressing, synthesizing and analyzing pulse waveforms. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Multi-Objective Optimal Design of Stand-Alone Hybrid Energy System Using Entropy Weight Method Based on HOMER

    Directory of Open Access Journals (Sweden)

    Jiaxin Lu

    2017-10-01

    Full Text Available Implementation of hybrid energy system (HES is generally considered as a promising way to satisfy the electrification requirements for remote areas. In the present study, a novel decision making methodology is proposed to identify the best compromise configuration of HES from a set of feasible combinations obtained from HOMER. For this purpose, a multi-objective function, which comprises four crucial and representative indices, is formulated by applying the weighted sum method. The entropy weight method is employed as a quantitative methodology for weighting factors calculation to enhance the objectivity of decision-making. Moreover, the optimal design of a stand-alone PV/wind/battery/diesel HES in Yongxing Island, China, is conducted as a case study to validate the effectiveness of the proposed method. Both the simulation and optimization results indicate that, the optimization method is able to identify the best trade-off configuration among system reliability, economy, practicability and environmental sustainability. Several useful conclusions are given by analyzing the operation of the best configuration.

  16. Comparing the weight method and the use of the tracer Uranine for assessing pesticide drift on soils

    Science.gov (United States)

    Garcia-Santos, G.; Scheiben, D.; Leuenberger, F.; Binder, C. R.

    2009-04-01

    Drift from pesticide backpack-spraying is of major importance in the highlands of Colombia, where more than 20% be drifted by wind effects. This study assesses the usefulness of the weight method and the use of the tracer Uranine for assessing pesticide drift distribution on soils. The weight method has been used in developing countries and consists of weighing previously dried papers, installed close to the soil surface, before and after spraying a known amount of water. Relative humidity, temperature, direction and speed of the wind were monitored during the experiments. The tracer Uranine is often used for groundwater studies. Uranine was added to the water and sprayed by the farmer in the same way he would spray any pesticide mixture. The same papers used in the previous method were stored after the spraying and weighing. The tracer was extracted in water and analyzed using a fluorescent spectrometer. The advantage of Uranine over other tracers is its easy extraction with water and low detectable concentration. No solvents are required for the extraction. The experiments were performed during two months in the wet season in the region of Vereda la Hoya, Boyaca, Colombia at an altitude of 2800 m a.s.l., from September to October. Each experiment lasted about 30 min. The fast-changing meteorological conditions in the region affected the success of the weight method. The paper's weight was very sensitive to atmospheric high relative humidity and different evaporative conditions in grass and bare ground. Location of the blanks was essential and had to represent each of the different experimental evaporative conditions. Although the method was easy to implement, we consider that it is not appropriate for areas characterized by high evapotranspiration rates, and fast-changing climatic conditions as found in the Colombian highlands above 2800 m a.s.l. Whereas Uranine was not sensitive to different evapotranspiration rates nor fast changing climatic conditions, this

  17. Trial of artifact reduction in body diffusion weighted imaging development and basic examination of 'TRacking Only Navigator' (TRON method)

    International Nuclear Information System (INIS)

    Horie, Tomohiko; Takahara, Tarou; Ogino, Tetsuo

    2008-01-01

    In recent years, the utility of body diffusion weighted imaging as represented by diffusion weighted whole body imaging with background body signal suppression (DWIBS), the DWIBS method, is very high. However, there was a problem in the DWIBS method involving the artifact corresponding to the distance of the diaphragm. To provide a solution, the respiratory trigger (RT) method and the navigator echo method were used together. A problem was that scan time extended to the compensation and did not predict the extension rate, although both artifacts were reduced. If we used only navigator real time slice tracking (NRST) from the findings obtained by the DWIBS method, we presumed the artifacts would be ameliorable without the extension of scan time. Thus, the TRacking Only Navigator (TRON) method was developed, and a basic examination was carried out for the liver. An important feature of the TRON method is the lack of the navigator gating window (NGW) and addition of the method of linear interpolation prior to NRST. The method required the passing speed and the distance from the volunteer's diaphragm. The estimated error from the 2D-selective RF pulse (2DSRP) of the TRON method to slice excitation was calculated. The condition of 2D SRP, which did not influence the accuracy of NRST, was required by the movement phantom. The volunteer was scanned, and the evaluation and actual scan time of the image quality were compared with the RT and DWIBS methods. Diaphragm displacement speed and the quantity of displacement were determined in the head and foot directions, and the result was 9 mm/sec, and 15 mm. The estimated error was within 2.5 mm in b-factor 1000 sec/mm 2 . The FA of 2DSRP was 15 degrees, and the navigator echo length was 120 mm, which was excellent. In the TRON method, the accuracy of NRST was steady because of line interpolation. The TRON method obtained image quality equal to that of the RT method with the b-factor in the volunteer scanning at short actual

  18. [Trial of artifact reduction in body diffusion weighted imaging development and basic examination of "TRacking Only Navigator"(TRON method)].

    Science.gov (United States)

    Horie, Tomohiko; Takahara, Tarou; Ogino, Tetsuo; Okuaki, Tomoyuki; Honda, Masatoshi; Okumura, Yasuhiro; Kajihara, Nao; Usui, Keisuke; Muro, Isao; Imai, Yutaka

    2008-09-20

    In recent years, the utility of body diffusion weighted imaging as represented by diffusion weighted whole body imaging with background body signal suppression (DWIBS), the DWIBS method, is very high. However, there was a problem in the DWIBS method involving the artifact corresponding to the distance of the diaphragm. To provide a solution, the respiratory trigger (RT) method and the navigator echo method were used together. A problem was that scan time extended to the compensation and did not predict the extension rate, although both artifacts were reduced. If we used only navigator real time slice tracking (NRST) from the findings obtained by the DWIBS method, we presumed the artifacts would be ameliorable without the extension of scan time. Thus, the TRacking Only Navigator (TRON) method was developed, and a basic examination was carried out for the liver. An important feature of the TRON method is the lack of the navigator gating window (NGW) and addition of the method of linear interpolation prior to NRST. The method required the passing speed and the distance from the volunteer's diaphragm. The estimated error from the 2D-selective RF pulse (2DSRP) of the TRON method to slice excitation was calculated. The condition of 2D SRP, which did not influence the accuracy of NRST, was required by the movement phantom. The volunteer was scanned, and the evaluation and actual scan time of the image quality were compared with the RT and DWIBS methods. Diaphragm displacement speed and the quantity of displacement were determined in the head and foot directions, and the result was 9 mm/sec, and 15 mm. The estimated error was within 2.5 mm in b-factor 1000 sec/mm(2). The FA of 2DSRP was 15 degrees, and the navigator echo length was 120 mm, which was excellent. In the TRON method, the accuracy of NRST was steady because of line interpolation. The TRON method obtained image quality equal to that of the RT method with the b-factor in the volunteer scanning at short actual

  19. Applying a new unequally weighted feature fusion method to improve CAD performance of classifying breast lesions

    Science.gov (United States)

    Zargari Khuzani, Abolfazl; Danala, Gopichandh; Heidari, Morteza; Du, Yue; Mashhadi, Najmeh; Qiu, Yuchen; Zheng, Bin

    2018-02-01

    Higher recall rates are a major challenge in mammography screening. Thus, developing computer-aided diagnosis (CAD) scheme to classify between malignant and benign breast lesions can play an important role to improve efficacy of mammography screening. Objective of this study is to develop and test a unique image feature fusion framework to improve performance in classifying suspicious mass-like breast lesions depicting on mammograms. The image dataset consists of 302 suspicious masses detected on both craniocaudal and mediolateral-oblique view images. Amongst them, 151 were malignant and 151 were benign. The study consists of following 3 image processing and feature analysis steps. First, an adaptive region growing segmentation algorithm was used to automatically segment mass regions. Second, a set of 70 image features related to spatial and frequency characteristics of mass regions were initially computed. Third, a generalized linear regression model (GLM) based machine learning classifier combined with a bat optimization algorithm was used to optimally fuse the selected image features based on predefined assessment performance index. An area under ROC curve (AUC) with was used as a performance assessment index. Applying CAD scheme to the testing dataset, AUC was 0.75+/-0.04, which was significantly higher than using a single best feature (AUC=0.69+/-0.05) or the classifier with equally weighted features (AUC=0.73+/-0.05). This study demonstrated that comparing to the conventional equal-weighted approach, using an unequal-weighted feature fusion approach had potential to significantly improve accuracy in classifying between malignant and benign breast masses.

  20. Height and Tilt Geometric Texture

    DEFF Research Database (Denmark)

    Andersen, Vedrana; Desbrun, Mathieu; Bærentzen, Jakob Andreas

    2009-01-01

    compromise between functionality and simplicity: it can efficiently handle and process geometric texture too complex to be represented as a height field, without having recourse to full blown mesh editing algorithms. The height-and-tilt representation proposed here is fully intrinsic to the mesh, making...

  1. Fluctuations in Schottky barrier heights

    International Nuclear Information System (INIS)

    Mahan, G.D.

    1984-01-01

    A double Schottky barrier is often formed at the grain boundary in polycrystalline semiconductors. The barrier height is shown to fluctuate in value due to the random nature of the impurity positions. The magnitude of the fluctuations is 0.1 eV, and the fluctuations cause the barrier height measured by capacitance to differ from the one measured by electrical conductivity

  2. Relationship of night and shift work with weight change and lifestyle behaviors

    NARCIS (Netherlands)

    Bekkers, M.B.M.; Koppes, L.L.J.; Rodenburg, W.; Steeg, H. van; Proper, K.I.

    2015-01-01

    Objective: To prospectively study the association of night and shift work with weight change and lifestyle behaviors. Methods: Workers participating in the Netherlands Working Conditions Cohort Study (2008 and 2009) (N = 5951) reported night and shift work, weight and height. Groups included stable

  3. Relationship of night and shift work with weight change and lifestyle behaviors.

    NARCIS (Netherlands)

    Bekkers, M.B.M; Koppes, L.L.J.; Rodenburg, W.; Steeg, H. van; Proper, K.I.

    2015-01-01

    Objective: To prospectively study the association of night and shift work with weight change and lifestyle behaviors. Methods: Workers participating in the Netherlands Working Conditions Cohort Study (2008 and 2009) (N = 5951) reported night and shift work, weight and height. Groups included stable

  4. Relationship of Night and Shift Work With Weight Change and Lifestyle Behaviors

    NARCIS (Netherlands)

    Bekkers, M.B.M.; Koppes, L.L.J.; Rodenburg, W.; van Steeg, H.; Proper, K.I.

    2015-01-01

    Objective: To prospectively study the association of night and shift work with weight change and lifestyle behaviors. Methods: Workers participating in the Netherlands Working Conditions Cohort Study (2008 and 2009) (N = 5951) reported night and shift work, weight and height. Groups included stable

  5. Volume-weighted particle-tracking method for solute-transport modeling; Implementation in MODFLOW–GWT

    Science.gov (United States)

    Winston, Richard B.; Konikow, Leonard F.; Hornberger, George Z.

    2018-02-16

    In the traditional method of characteristics for groundwater solute-transport models, advective transport is represented by moving particles that track concentration. This approach can lead to global mass-balance problems because in models of aquifers having complex boundary conditions and heterogeneous properties, particles can originate in cells having different pore volumes and (or) be introduced (or removed) at cells representing fluid sources (or sinks) of varying strengths. Use of volume-weighted particles means that each particle tracks solute mass. In source or sink cells, the changes in particle weights will match the volume of water added or removed through external fluxes. This enables the new method to conserve mass in source or sink cells as well as globally. This approach also leads to potential efficiencies by allowing the number of particles per cell to vary spatially—using more particles where concentration gradients are high and fewer where gradients are low. The approach also eliminates the need for the model user to have to distinguish between “weak” and “strong” fluid source (or sink) cells. The new model determines whether solute mass added by fluid sources in a cell should be represented by (1) new particles having weights representing appropriate fractions of the volume of water added by the source, or (2) distributing the solute mass added over all particles already in the source cell. The first option is more appropriate for the condition of a strong source; the latter option is more appropriate for a weak source. At sinks, decisions whether or not to remove a particle are replaced by a reduction in particle weight in proportion to the volume of water removed. A number of test cases demonstrate that the new method works well and conserves mass. The method is incorporated into a new version of the U.S. Geological Survey’s MODFLOW–GWT solute-transport model.

  6. Centroid Localization of Uncooperative Nodes in Wireless Networks Using a Relative Span Weighting Method

    Directory of Open Access Journals (Sweden)

    Christine Laurendeau

    2010-01-01

    Full Text Available Increasingly ubiquitous wireless technologies require novel localization techniques to pinpoint the position of an uncooperative node, whether the target is a malicious device engaging in a security exploit or a low-battery handset in the middle of a critical emergency. Such scenarios necessitate that a radio signal source be localized by other network nodes efficiently, using minimal information. We propose two new algorithms for estimating the position of an uncooperative transmitter, based on the received signal strength (RSS of a single target message at a set of receivers whose coordinates are known. As an extension to the concept of centroid localization, our mechanisms weigh each receiver's coordinates based on the message's relative RSS at that receiver, with respect to the span of RSS values over all receivers. The weights may decrease from the highest RSS receiver either linearly or exponentially. Our simulation results demonstrate that for all but the most sparsely populated wireless networks, our exponentially weighted mechanism localizes a target node within the regulations stipulated for emergency services location accuracy.

  7. Do weight management programmes delivered at professional football clubs attract and engage high risk men? A mixed-methods study.

    Science.gov (United States)

    Hunt, Kate; Gray, Cindy M; Maclean, Alice; Smillie, Susan; Bunn, Christopher; Wyke, Sally

    2014-01-21

    The prevalence of obesity in men in the UK is amongst the highest in Europe but men are less likely than women to use existing weight loss programmes. Developing weight management programmes which are appealing and acceptable to men is a public health priority. Football Fans in Training (FFIT), a men-only weight management programme delivered to groups of men at top professional football clubs, encourages men to lose weight by working with, not against, cultural ideals of masculinity. To inform further development of interventions in football club settings, the current study explored who is attracted to FFIT and why overweight/obese men choose to take part. A mixed-methods study analysing baseline data on 747 men aged 35-65 years with BMI ≥ 28 kg/m2 who were participants in a randomised controlled trial of FFIT, and data from 13 focus group discussions with 63 men who had attended the programme. Objectively-measured mean body mass index was 35.3 kg/m2 (sd 4.9). Overall over 90% of participants were at very high or extremely high risk of future ill-health. Around three-quarters of participants in all age groups were at 'very high' risk of type 2 diabetes, hypertension and cardiovascular disease (72%, 73% and 80% of men aged 35-44, 45-54 and 55-64 years respectively). A further 21%, 16% and 13% were at 'extremely high' risk. Qualitative data revealed that the powerful 'draw' of the football club attracted men otherwise reluctant to attend existing weight management programmes. The location and style of delivery of early FFIT sessions fostered team spirit; men appreciated being with others 'like them' and the opportunity to undertake weight management in circumstances that enhanced physical and symbolic proximity to something they valued highly, the football club. The delivery of a weight management intervention via professional football clubs attracted men at high risk of ill-health. The setting enabled men to join a weight management programme in

  8. Method of determination of the critical obstacles height that can be overcome by a car at a given rate of rectilinear motion without losing lateral stability

    Directory of Open Access Journals (Sweden)

    Bashynskyj A.L.

    2016-08-01

    Full Text Available The mobility of combat vehicle is the key to its survival. The movement of military wheeled vehicles over rough terrain is tightly linked to the risk of tipping while overcoming obstacles that require modeling the stability of rectilinear cross-country motion of the sample to determine priority samples for acquisition units or advice on the parameters of the suspension for vehicles that still are in the design stage. The author proposes an analytical method for determining geometric parameters of the obstacles that can be overcome by the sample at a given speed of its movement, while taking into consideration the mutual movement of spring and non-spring mass of the vehicle relative to the center of rotation. Also it is found that while transition from the horizontal plane of movement on an inclined the most dangerous moment is the moment of excitation of vibrstions. It is shown that rapid movement of spring mass in regard to the center of rotation can lead to a significant reduction of the roll bar coefficient. The dependencies to describe the mutual movement of spring and non-spring mass of the vehicle, influence of geometrical parameters of obstacles on lateral stability of the vehicle are received.

  9. Experiences of ZAMG on mixing height determination

    Energy Technology Data Exchange (ETDEWEB)

    Piringer, M. [Zentralanstalt fuer Meteorologie und Geodynamik, ZAMG, Vienna (Austria)

    1997-10-01

    Temperature inversions in the boundary layer occur quite often, esp. in mountainous terrain by which Austria is covered to a large extent, and can lead to enhanced pollution at the surface because the air volume available for dilution is then vertically limited. The Department of Environmental Meteorology of ZAMG therefore set up several field programs in the past to study such conditions at a variety of sites in Austria, using tethersondes and Sodars. Early investigations aimed at comparing Sodar echo profiles to the tethersonde temperature profiles to derive mixing heights from the Sodar echo structure. More recently, evolving from KONGEX, the `convective boundary layer experiment`, mixing heights calculated for Vienna by the OML model were compared to those derived from radiosonde and tethersonde potential temperature profiles. Results of these investigations will be presented, focussing on the problems when using the different methods. New efforts to derive mixing heights from data were also undertaken and are discussed separately. (au)

  10. Decision support system in Predicting the Best teacher with Multi Atribute Decesion Making Weighted Product (MADMWP Method

    Directory of Open Access Journals (Sweden)

    Solikhun Solikhun

    2017-06-01

    Full Text Available Predicting of the best teacher in Indonesia aims to spur the development of the growth and improve the quality of the education. In this paper, the predicting  of the best teacher is implemented based on predefined criteria. To help the predicting process, a decision support system is needed. This paper employs Multi Atribute Decesion Making Weighted Product (MADMWP method. The result of this method is tested some teachers in  junior high school islamic boarding Al-Barokah school, Simalungun, North Sumatera, Indonesia. This system can be used to help in solving problems of the best teacher prediction.

  11. Parasitoses intestinais se associam a menores índices de peso e estatura em escolares de baixo estrato socioeconômico Parasitosis intestinales se asocian con menores índices de peso y estatura en niños de bajo nivel económico Intestinal parasitoses are associated with lower values of weight and height in school-aged children from low socioeconomic level

    Directory of Open Access Journals (Sweden)

    Humberto B. Araujo Filho

    2011-12-01

    fue realizada por el método Hemocueâ y la investigación de parasitas intestinales por los métodos de Hoffman, Ritchie, Kinyoun y Swab anal. RESULTADOS: Parasitosis intestinal ocurrió en 60,7% de los niños del suburbio y en 5,9% de los niños de la escuela privada (pOBJECTIVE: To evaluate the association between the prevalence of intestinal parasitosis with socioeconomic and environmental factors, as well as with weight, height and hemoglobin levels in two different socioeconomic groups of children in Osasco (SP, Brazil. METHODS: This cross-sectional study compared 84 children aged from six to ten years old from a slum area without proper sanitation and poor housing with 35 children attending private school with good socioeconomic level and housing conditions in the same city. Children with diarrhea for less than 30 days or severe illness were excluded. A standard questionnaire was applied for assessing social and environmental conditions. The nutritional assessment was done by Z scores for weight for age, height for age and body mass index. Capillary blood hemoglobin determination was done by HemoCue® method and intestinal parasitosis examination was performed by the Hoffman, Ritchie, Kinyoun and anal swab methods. RESULTS: Intestinal parasitosis occurred in 60.7% of children from the slum and in 5.9% of children from private schools (p<0.001; OR 24.7. The average Z scores of weight for age, height for age and body mass index were lower in infected children (-0.78±0.84; +0.50±0.90; -0.76±0.96 compared to non infected children (-0.18±1.18; +0.03±1.10; -0.28±1.16 with statistical differences (p<0.05. There was no difference in average hemoglobin levels between infected and non infected children by intestinal parasitosis in the slum group (12.6±1.1g/dL and 12.8±1.2g/dL; p=0.58. CONCLUSIONS: Intestinal parasitosis were more prevalent among children from the slum and were associated with lower weight and height.

  12. Adult body height is a good predictor of different dimensions of cognitive function in aged individuals

    Directory of Open Access Journals (Sweden)

    Vitor Hugo Pereira

    2016-09-01

    Full Text Available Background: Adult height, weight and adiposity measures have been suggested by some studies to be predictors of depression, cognitive impairment and dementia. However, the presence of confounding factors and the lack of a thorough neuropsychological evaluation in many of these studies have precluded a definitive conclusion about the influence of anthropometric measures in cognition and depression. In this study we aim to assess the value of adult height and weight to predict cognitive impairment and depressive symptoms in aged individuals.Methods and Findings: Cross-sectional study performed between 2010 and 2012 in the Portuguese general community. A total of 1050 participants were included in the study and randomly selected from local area health authority registries. The cohort was representative of the general Portuguese population with respect to age (above 50 years of age and gender. Cognitive function was assessed using a battery of tests grouped in two dimensions: general executive function and memory. Two-step hierarchical multiple linear regression models were conducted to determine the predictive value of anthropometric measures in cognitive performance and mood before and after correction for possible confounding factors (gender, age, school years, physical activity, alcohol consumption and smoking habits. We found single associations of weight, height, body mass index, abdominal perimeter and age with executive function, memory and depressive symptoms. However, when included in a predictive model adjusted for gender, age, school years and lifestyle factors only height prevailed as a significant predictor of general executive function (β=0,139; p<0,001 and memory (β=0,099; p<0,05. No relation was found between mood and any of the anthropometric measures studied.Conclusions and Relevance: Height is an independent predictor of cognitive function in late-life and its effects on the general and executive function and memory are

  13. On the optimization of a mixed speaker array in an enclosed space using the virtual-speaker weighting method

    Science.gov (United States)

    Peng, Bo; Zheng, Sifa; Liao, Xiangning; Lian, Xiaomin

    2018-03-01

    In order to achieve sound field reproduction in a wide frequency band, multiple-type speakers are used. The reproduction accuracy is not only affected by the signals sent to the speakers, but also depends on the position and the number of each type of speaker. The method of optimizing a mixed speaker array is investigated in this paper. A virtual-speaker weighting method is proposed to optimize both the position and the number of each type of speaker. In this method, a virtual-speaker model is proposed to quantify the increment of controllability of the speaker array when the speaker number increases. While optimizing a mixed speaker array, the gain of the virtual-speaker transfer function is used to determine the priority orders of the candidate speaker positions, which optimizes the position of each type of speaker. Then the relative gain of the virtual-speaker transfer function is used to determine whether the speakers are redundant, which optimizes the number of each type of speaker. Finally the virtual-speaker weighting method is verified by reproduction experiments of the interior sound field in a passenger car. The results validate that the optimum mixed speaker array can be obtained using the proposed method.

  14. Prevalence of overweight misperception and weight control behaviors among normal weight adolescents in the United States

    Directory of Open Access Journals (Sweden)

    Kathleen S. Talamayan

    2006-01-01

    Full Text Available Weight perceptions and weight control behaviors have been documented with underweight and overweight adolescents, yet limited information is available on normal weight adolescents. This study investigates the prevalence of overweight misperceptions and weight control behaviors among normal weight adolescents in the U.S. by sociodemographic and geographic characteristics. We examined data from the 2003 Youth Risk Behavior Survey (YRBS. A total of 9,714 normal weight U.S. high school students were included in this study. Outcome measures included self-reported height and weight measurements, overweight misperceptions, and weight control behaviors. Weighted prevalence estimates and odds ratios were computed. There were 16.2% of normal weight students who perceived themselves as overweight. Females (25.3% were more likely to perceive themselves as overweight than males (6.7% (p < 0.05. Misperceptions of overweight were highest among white (18.3% and Hispanic students (15.2% and lowest among black students (5.8%. Females (16.8% outnumbered males (6.8% in practicing at least one unhealthy weight control behavior (use of diet pills, laxatives, and fasting in the past 30 days. The percentage of students who practiced at least one weight control behavior was similar by ethnicity. There were no significant differences in overweight misperception and weight control behaviors by grade level, geographic region, or metropolitan status. A significant portion of normal weight adolescents misperceive themselves as overweight and are engaging in unhealthy weight control behaviors. These data suggest that obesity prevention programs should address weight misperceptions and the harmful effects of unhealthy weight control methods even among normal weight adolescents.

  15. Birth Weight and Length as Predictors for Adult Height

    DEFF Research Database (Denmark)

    Sørensen, Henrik Toft; Sabroe, Svend; Rothman, Kenneth J.

    1999-01-01

    . They conducted the study in the fifth conscription district of Denmark including all the men born after January 1, 1973 who were residents in the study area during the period August 1, 1993 to July 31, 1994. The Danish Medical Birth Register contains information on all births in Denmark since January 1, 1973...

  16. What's the Right Weight for My Height? (For Teens)

    Science.gov (United States)

    ... cases, teens can be underweight because of a health problem that needs treatment. See a doctor if you notice any of these things: You ... Motivated to Exercise? When Being Overweight Is a Health Problem 5 Ways to Reach a Healthy ... diagnoses, and treatment, consult your doctor. © 1995- The Nemours Foundation. All rights reserved. Images ...

  17. Degeneration and height of cervical discs classified from MRI compared with precise height measurements from radiographs

    Energy Technology Data Exchange (ETDEWEB)

    Kolstad, Frode [National Centre of Spinal Disorders, Norwegian University of Science and Technology, University Hospital of Trondheim, 7006 Trondheim (Norway)]. E-mail: frode.kolstad@medisin.ntnu.no; Myhr, Gunnar [Department of Radiology, University Hospital of Trondheim, 7006 Trondheim (Norway); Kvistad, Kjell Arne [Department of Radiology, University Hospital of Trondheim, 7006 Trondheim (Norway); Nygaard, Oystein P. [National Centre of Spinal Disorders, Norwegian University of Science and Technology, University Hospital of Trondheim, 7006 Trondheim (Norway); Leivseth, Gunnar [Department of Neuromedicine, Faculty of Medicine, Norwegian University of Science and Technology, University Hospital of Trondheim, 7006 Trondheim (Norway)

    2005-09-01

    Study design: Descriptive study comparing MRI classifications with measurements from radiographs. Objectives: 1.Define the relationship between MRI classified cervical disc degeneration and objectively measured disc height. 2.Assess the level of inter- and intra-observer errors using MRI in defining cervical disc degeneration. Summary of background data: Cervical spine degeneration has been defined radiologically by loss of disc height, decreased disc and bone marrow signal intensity and disc protrusion/herniation on MRI. The intra- and inter-observer error using MRI in defining cervical degeneration influences data interpretation. Few previous studies have addressed this source of error. The relation and time sequence between cervical disc degeneration classified by MRI and cervical disc height decrease measured from radiographs is unclear. Methods: The MRI classification of degeneration was based on nucleus signal, prolaps identification and bone marrow signal. Two neuro-radiologists evaluated the MR-images independently in a blinded fashion. The radiographic disc height measurements were done by a new computer-assisted method compensating for image distortion and permitting comparison with normal level-, age- and gender-appropriate disc height. Results/conclusions: 1.Progressing disc degeneration classified from MRI is on average significantly associated with a decrease of disc height as measured from radiographs. Within each MRI defined category of degeneration measured disc heights, however, scatter in a wide range. 2.The inter-observer agreement between two neuro-radiologists in both defining degeneration and disc height by MRI was only moderate. Studies addressing questions related to cervical disc degeneration should take this into consideration.

  18. Degeneration and height of cervical discs classified from MRI compared with precise height measurements from radiographs

    International Nuclear Information System (INIS)

    Kolstad, Frode; Myhr, Gunnar; Kvistad, Kjell Arne; Nygaard, Oystein P.; Leivseth, Gunnar

    2005-01-01

    Study design: Descriptive study comparing MRI classifications with measurements from radiographs. Objectives: 1.Define the relationship between MRI classified cervical disc degeneration and objectively measured disc height. 2.Assess the level of inter- and intra-observer errors using MRI in defining cervical disc degeneration. Summary of background data: Cervical spine degeneration has been defined radiologically by loss of disc height, decreased disc and bone marrow signal intensity and disc protrusion/herniation on MRI. The intra- and inter-observer error using MRI in defining cervical degeneration influences data interpretation. Few previous studies have addressed this source of error. The relation and time sequence between cervical disc degeneration classified by MRI and cervical disc height decrease measured from radiographs is unclear. Methods: The MRI classification of degeneration was based on nucleus signal, prolaps identification and bone marrow signal. Two neuro-radiologists evaluated the MR-images independently in a blinded fashion. The radiographic disc height measurements were done by a new computer-assisted method compensating for image distortion and permitting comparison with normal level-, age- and gender-appropriate disc height. Results/conclusions: 1.Progressing disc degeneration classified from MRI is on average significantly associated with a decrease of disc height as measured from radiographs. Within each MRI defined category of degeneration measured disc heights, however, scatter in a wide range. 2.The inter-observer agreement between two neuro-radiologists in both defining degeneration and disc height by MRI was only moderate. Studies addressing questions related to cervical disc degeneration should take this into consideration

  19. New methods for solving a vertex p-center problem with uncertain demand-weighted distance: A real case study

    Directory of Open Access Journals (Sweden)

    Javad Nematian

    2015-04-01

    Full Text Available Vertex and p-center problems are two well-known types of the center problem. In this paper, a p-center problem with uncertain demand-weighted distance will be introduced in which the demands are considered as fuzzy random variables (FRVs and the objective of the problem is to minimize the maximum distance between a node and its nearest facility. Then, by introducing new methods, the proposed problem is converted to deterministic integer programming (IP problems where these methods will be obtained through the implementation of the possibility theory and fuzzy random chance-constrained programming (FRCCP. Finally, the proposed methods are applied for locating bicycle stations in the city of Tabriz in Iran as a real case study. The computational results of our study show that these methods can be implemented for the center problem with uncertain frameworks.

  20. Numerical evolutions of fields on the 2-sphere using a spectral method based on spin-weighted spherical harmonics

    International Nuclear Information System (INIS)

    Beyer, Florian; Daszuta, Boris; Frauendiener, Jörg; Whale, Ben

    2014-01-01

    Many applications in science call for the numerical simulation of systems on manifolds with spherical topology. Through the use of integer spin-weighted spherical harmonics, we present a method which allows for the implementation of arbitrary tensorial evolution equations. Our method combines two numerical techniques that were originally developed with different applications in mind. The first is Huffenberger and Wandelt’s spectral decomposition algorithm to perform the mapping from physical to spectral space. The second is the application of Luscombe and Luban’s method, to convert numerically divergent linear recursions into stable nonlinear recursions, to the calculation of reduced Wigner d-functions. We give a detailed discussion of the theory and numerical implementation of our algorithm. The properties of our method are investigated by solving the scalar and vectorial advection equation on the sphere, as well as the 2 + 1 Maxwell equations on a deformed sphere. (paper)

  1. Mexico Geoid Heights (MEXICO97)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This 2' geoid height grid for Mexico, and North-Central America, is the MEXICO97 geoid model. The computation used about one million terrestrial and marine gravity...

  2. Alaska Geoid Heights (GEOID96)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This 2' x 4' geoid height grid for Alaska is distributed as a GEOID96 model. The computation used 1.1 million terrestrial and marine gravity data held in the...

  3. Efficiency of selection methods for increased ratio of pupal-larval to adult-larval weight gains in Tribolium.

    Science.gov (United States)

    Campo, J L; Cobos, P

    1994-01-12

    Four lines of Tribolium castaneum were selected in each of three replicates for increased ratio of (pupal-larval) to (adult-larval) weight gains, using selection for increased (pupal-larval) weight gain (PL), selection for decreased (adult-larval) weight gain (AL), direct selection for the ratio (R) and linear selection index of larval, pupal and adult weights (I), respectively, for four generations. Linear index was calculated with economic weights of m(2) -m(3) , m(3) -m(1) and m(1) -m(2) , respectively, with m(1) , m(2) and m(3) being the means for larval, pupal and adult weights. Selection to increase the ratio is considered to be a method to maximize the mean response in (adult-larval) weight while controlling the response in (pupal-adult) weight, and as a form of antagonistic selection to increase the weight gain during a given age period relative to the gain at another age period. Larval, pupal and adult weights were measured at 14, 21 and 28 days after adult emergence, respectively. The selected proportion was 20 % in all lines. The response observed for the ratio differed significantly among lines (p adulto-peso de larva en Tribolium Cuatro líneas de Tribolium castaneum fueron seleccionadas en cada una de tres repeticiones para incrementar el cociente (peso de pupa-peso de larva)/(peso de adulto-peso de larva); la línea PL fue seleccionada para aumentar la diferencia (peso de pupa-pesp de larva), la línea AL fue seleccionada para disminuir la diferencia (peso de adulto-peso de larva), fa línea R fue seleccionada directamente para el cociente, y la línea I fue seleccionada por medio de un índice lineal basado en los pesos de larva, pupa y adulto, durante cuatro generaciones. El índice lineal se calculó con pesos económicos de (m(2) -m(3) ), (m(3) -m(1) ), y (m(1) -m(2) ) respectivamentee, siendo m(1) , m(2) , y m(3) los valores medios para el peso de larva, pupa y adulto. La selección para aumentar el cociente indicado es un método para maximizar

  4. A proposed cutoff point of waist-to-height ratio for metabolic risk in African township adolescents

    OpenAIRE

    Kruger, H. Salomé; Faber, Mieke; Schutte, Aletta E.; Ellis, Suria M.

    2013-01-01

    Objective: A waist:height ratio (WHtR) higher than 0.5 has been proposed as a cutoff point for abdominal obesity in both sexes and at all ages. It is unknown if this cutoff point is appropriate for previously undernourished adolescents. We assessed the cutoff value of the WHtR associated with an increased metabolic risk in 178 black South African 14- to 18-y-old adolescents (69 boys, 109 girls). Methods: We measured weight, height, waist circumference, fasting plasma glucose an...

  5. Size-exclusion chromatography (HPLC-SEC) technique optimization by simplex method to estimate molecular weight distribution of agave fructans.

    Science.gov (United States)

    Moreno-Vilet, Lorena; Bostyn, Stéphane; Flores-Montaño, Jose-Luis; Camacho-Ruiz, Rosa-María

    2017-12-15

    Agave fructans are increasingly important in food industry and nutrition sciences as a potential ingredient of functional food, thus practical analysis tools to characterize them are needed. In view of the importance of the molecular weight on the functional properties of agave fructans, this study has the purpose to optimize a method to determine their molecular weight distribution by HPLC-SEC for industrial application. The optimization was carried out using a simplex method. The optimum conditions obtained were at column temperature of 61.7°C using tri-distilled water without salt, adjusted pH of 5.4 and a flow rate of 0.36mL/min. The exclusion range is from 1 to 49 of polymerization degree (180-7966Da). This proposed method represents an accurate and fast alternative to standard methods involving multiple-detection or hydrolysis of fructans. The industrial applications of this technique might be for quality control, study of fractionation processes and determination of purity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. An Efficient Seam Elimination Method for UAV Images Based on Wallis Dodging and Gaussian Distance Weight Enhancement.

    Science.gov (United States)

    Tian, Jinyan; Li, Xiaojuan; Duan, Fuzhou; Wang, Junqian; Ou, Yang

    2016-05-10

    The rapid development of Unmanned Aerial Vehicle (UAV) remote sensing conforms to the increasing demand for the low-altitude very high resolution (VHR) image data. However, high processing speed of massive UAV data has become an indispensable prerequisite for its applications in various industry sectors. In this paper, we developed an effective and efficient seam elimination approach for UAV images based on Wallis dodging and Gaussian distance weight enhancement (WD-GDWE). The method encompasses two major steps: first, Wallis dodging was introduced to adjust the difference of brightness between the two matched images, and the parameters in the algorithm were derived in this study. Second, a Gaussian distance weight distribution method was proposed to fuse the two matched images in the overlap region based on the theory of the First Law of Geography, which can share the partial dislocation in the seam to the whole overlap region with an effect of smooth transition. This method was validated at a study site located in Hanwang (Sichuan, China) which was a seriously damaged area in the 12 May 2008 enchuan Earthquake. Then, a performance comparison between WD-GDWE and the other five classical seam elimination algorithms in the aspect of efficiency and effectiveness was conducted. Results showed that WD-GDWE is not only efficient, but also has a satisfactory effectiveness. This method is promising in advancing the applications in UAV industry especially in emergency situations.