WorldWideScience

Sample records for methods differ greatly

  1. Effects of different cooking methods on fatty acid profiles in four freshwater fishes from the Laurentian Great Lakes region.

    Science.gov (United States)

    Neff, Margaret R; Bhavsar, Satyendra P; Braekevelt, Eric; Arts, Michael T

    2014-12-01

    Fish is often promoted as a healthy part of the human diet due its high content of long chain n-3 polyunsaturated fatty acids (LC-PUFA). Previous studies have shown that cooked fish can have different fatty acid profiles than raw fillets, depending on the cooking method and fish species. In this study, the fatty acid content of broiled, baked or fried skinless, boneless fillets of four fish species from the tributaries of the Great Lakes, or connecting rivers, was compared to fatty acid profiles in raw sections from the same fillet. Cooking treatments had little effect on n-3 fatty acid content; however, fried treatments generally had higher n-6 and MUFA content, which is likely a result of the cooking oil used (canola). Broiling or baking is generally the most healthy option presented in this study, as these methods result in lower levels of less-favourable fatty acids; however, the choice of cooking oil may also influence the overall fatty acid content in cooked fish. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

  2. Regional Personality Differences in Great Britain

    Science.gov (United States)

    Rentfrow, Peter J.; Jokela, Markus; Lamb, Michael E.

    2015-01-01

    Recent investigations indicate that personality traits are unevenly distributed geographically, with some traits being more prevalent in certain places than in others. The geographical distributions of personality traits are associated with a range of important political, economic, social, and health outcomes. The majority of research on this subject has focused on the geographical distributions and macro-level correlates of personality across nations or regions of the United States. The aim of the present investigation was to replicate and extend that past work by examining regional personality differences in Great Britain. Using a sample of nearly 400,000 British residents, we mapped the geographical distributions of the Big Five Personality traits across 380 Local Authority Districts and examined the associations with important political, economic, social, and health outcomes. The results revealed distinct geographical clusters, with neighboring regions displaying similar personality characteristics, and robust associations with the macro-level outcome variables. Overall, the patterns of results were similar to findings from past research. PMID:25803819

  3. Two different hematocrit detection methods: Different methods, different results?

    Directory of Open Access Journals (Sweden)

    Schuepbach Reto A

    2010-03-01

    Full Text Available Abstract Background Less is known about the influence of hematocrit detection methodology on transfusion triggers. Therefore, the aim of the present study was to compare two different hematocrit-assessing methods. In a total of 50 critically ill patients hematocrit was analyzed using (1 blood gas analyzer (ABLflex 800 and (2 the central laboratory method (ADVIA® 2120 and compared. Findings Bland-Altman analysis for repeated measurements showed a good correlation with a bias of +1.39% and 2 SD of ± 3.12%. The 24%-hematocrit-group showed a correlation of r2 = 0.87. With a kappa of 0.56, 22.7% of the cases would have been transfused differently. In the-28%-hematocrit group with a similar correlation (r2 = 0.8 and a kappa of 0.58, 21% of the cases would have been transfused differently. Conclusions Despite a good agreement between the two methods used to determine hematocrit in clinical routine, the calculated difference of 1.4% might substantially influence transfusion triggers depending on the employed method.

  4. Mimetic finite difference method

    Science.gov (United States)

    Lipnikov, Konstantin; Manzini, Gianmarco; Shashkov, Mikhail

    2014-01-01

    The mimetic finite difference (MFD) method mimics fundamental properties of mathematical and physical systems including conservation laws, symmetry and positivity of solutions, duality and self-adjointness of differential operators, and exact mathematical identities of the vector and tensor calculus. This article is the first comprehensive review of the 50-year long history of the mimetic methodology and describes in a systematic way the major mimetic ideas and their relevance to academic and real-life problems. The supporting applications include diffusion, electromagnetics, fluid flow, and Lagrangian hydrodynamics problems. The article provides enough details to build various discrete operators on unstructured polygonal and polyhedral meshes and summarizes the major convergence results for the mimetic approximations. Most of these theoretical results, which are presented here as lemmas, propositions and theorems, are either original or an extension of existing results to a more general formulation using polyhedral meshes. Finally, flexibility and extensibility of the mimetic methodology are shown by deriving higher-order approximations, enforcing discrete maximum principles for diffusion problems, and ensuring the numerical stability for saddle-point systems.

  5. Estimation of the ancestral effective population sizes of African great apes under different selection regimes.

    Science.gov (United States)

    Schrago, Carlos G

    2014-08-01

    Reliable estimates of ancestral effective population sizes are necessary to unveil the population-level phenomena that shaped the phylogeny and molecular evolution of the African great apes. Although several methods have previously been applied to infer ancestral effective population sizes, an analysis of the influence of the selective regime on the estimates of ancestral demography has not been thoroughly conducted. In this study, three independent data sets under different selective regimes were used were composed to tackle this issue. The results showed that selection had a significant impact on the estimates of ancestral effective population sizes of the African great apes. The inference of the ancestral demography of African great apes was affected by the selection regime. The effects, however, were not homogeneous along the ancestral populations of great apes. The effective population size of the ancestor of humans and chimpanzees was more impacted by the selection regime when compared to the same parameter in the ancestor of humans, chimpanzees and gorillas. Because the selection regime influenced the estimates of ancestral effective population size, it is reasonable to assume that a portion of the discrepancy found in previous studies that inferred the ancestral effective population size may be attributable to the differential action of selection on the genes sampled.

  6. Development of rupture process analysis method for great earthquakes using Direct Solution Method

    Science.gov (United States)

    Yoshimoto, M.; Yamanaka, Y.; Takeuchi, N.

    2010-12-01

    Conventional rupture process analysis methods using teleseismic body waves were based on ray theory. Therefore, these methods have the following problems in applying to great earthquakes such as 2004 Sumatra earthquake: (1) difficulty in computing all later phases such as the PP reflection phase, (2) impossibility of computing called “W phase”, the long period phase arriving before S wave, (3) implausibility of hypothesis that the distance is far enough from the observation points to the hypocenter compared to the fault length. To solve above mentioned problems, we have developed a new method which uses the synthetic seismograms computed by the Direct Solution Method (DSM, e.g. Kawai et al. 2006) as Green’s functions. We used the DSM software (http://www.eri.u-tokyo.ac.jp/takeuchi/software/) for computing the Green’s functions up to 1 Hz for the IASP91 (Kennett and Engdahl, 1991) model, and determined the final slip distributions using the waveform inversion method (Kikuchi et al. 2003). First we confirmed whether the Green’s functions computed by DSM were accurate in higher frequencies up to 1 Hz. Next we performed the rupture process analysis of this new method for Mw8.0 (GCMT) large Solomon Islands earthquake on April 1, 2007. We found that this earthquake consisted of two asperities and the rupture propagated across the subducting Sinbo ridge. The obtained slip distribution better correlates to the aftershock distributions than existing method. Furthermore, this new method keep same accuracy of existing method (which has the advantage of calculating) with respect to direct P-wave and reflection phases near the source, and also accurately calculate the later phases such a PP-wave.

  7. Individual differences in the use of social information in foraging by captive great tits

    NARCIS (Netherlands)

    Marchetti, C.M.; Drent, P.J.

    2000-01-01

    We investigated individual differences in copying behaviour of captive great tits, Parus major, by analysing their response to a tutor indicating a new feeding site. We used two groups, each di seven male birds, labelled 'fast' and 'slow' explorers based on previous studies in which consistent

  8. Tissue differences in fragile X mosaics: Mosaicism in blood cells may differ greatly from skin

    Energy Technology Data Exchange (ETDEWEB)

    Dobkin, C.S.; Nolin, S.L.; Cohen, I. [NYS Institute for Basic Research in Developmental Disabilities, Staten Island, NY (United States)] [and others

    1996-08-09

    The fragile X mutation is diagnosed from the structure of the FMR1 gene in blood cell DNA. An estimated 12 to 41% of affected males are mosaics who carry both a {open_quotes}full mutation{close_quotes} allele from which there is no gene expression and a {open_quotes}premutation{close_quotes} allele which has normal gene expression. We compared the DNA in blood cells and skin fibroblasts from four mosaic fragile X males to see if there was a difference in the relative amounts of premutation and full mutation alleles within the tissues of these individuals. Two of these males showed striking differences in the ratio of premutation to full mutation in different tissues while the other two showed only slight differences. These observations conform with the widely accepted hypothesis that the fragile X CGG repeat is unstable in somatic tissue during early embryogenesis. Accordingly, the mosaicism in brain and skin, which are both ectodermal in origin, may be similar to each other but different from blood which is not ectodermal in origin. Thus, the ratio of full mutation to premutation allele in skin fibroblasts might be a better indicator of psychological impairment than the ratio in blood cells. 24 refs., 4 figs., 1 tab.

  9. Human and great ape red blood cells differ in plasmalogen levels and composition.

    Science.gov (United States)

    Moser, Ann B; Steinberg, Steven J; Watkins, Paul A; Moser, Hugo W; Ramaswamy, Krishna; Siegmund, Kimberly D; Lee, D Rick; Ely, John J; Ryder, Oliver A; Hacia, Joseph G

    2011-06-17

    Plasmalogens are ether phospholipids required for normal mammalian developmental, physiological, and cognitive functions. They have been proposed to act as membrane antioxidants and reservoirs of polyunsaturated fatty acids as well as influence intracellular signaling and membrane dynamics. Plasmalogens are particularly enriched in cells and tissues of the human nervous, immune, and cardiovascular systems. Humans with severely reduced plasmalogen levels have reduced life spans, abnormal neurological development, skeletal dysplasia, impaired respiration, and cataracts. Plasmalogen deficiency is also found in the brain tissue of individuals with Alzheimer disease. In a human and great ape cohort, we measured the red blood cell (RBC) levels of the most abundant types of plasmalogens. Total RBC plasmalogen levels were lower in humans than bonobos, chimpanzees, and gorillas, but higher than orangutans. There were especially pronounced cross-species differences in the levels of plasmalogens with a C16:0 moiety at the sn-1 position. Humans on Western or vegan diets had comparable total RBC plasmalogen levels, but the latter group showed moderately higher levels of plasmalogens with a C18:1 moiety at the sn-1 position. We did not find robust sex-specific differences in human or chimpanzee RBC plasmalogen levels or composition. Furthermore, human and great ape skin fibroblasts showed only modest differences in peroxisomal plasmalogen biosynthetic activity. Human and chimpanzee microarray data indicated that genes involved in plasmalogen biosynthesis show cross-species differential expression in multiple tissues. We propose that the observed differences in human and great ape RBC plasmalogens are primarily caused by their rates of biosynthesis and/or turnover. Gene expression data raise the possibility that other human and great ape cells and tissues differ in plasmalogen levels. Based on the phenotypes of humans and rodents with plasmalogen disorders, we propose that cross

  10. Human and great ape red blood cells differ in plasmalogen levels and composition

    Directory of Open Access Journals (Sweden)

    Ely John J

    2011-06-01

    Full Text Available Abstract Background Plasmalogens are ether phospholipids required for normal mammalian developmental, physiological, and cognitive functions. They have been proposed to act as membrane antioxidants and reservoirs of polyunsaturated fatty acids as well as influence intracellular signaling and membrane dynamics. Plasmalogens are particularly enriched in cells and tissues of the human nervous, immune, and cardiovascular systems. Humans with severely reduced plasmalogen levels have reduced life spans, abnormal neurological development, skeletal dysplasia, impaired respiration, and cataracts. Plasmalogen deficiency is also found in the brain tissue of individuals with Alzheimer disease. Results In a human and great ape cohort, we measured the red blood cell (RBC levels of the most abundant types of plasmalogens. Total RBC plasmalogen levels were lower in humans than bonobos, chimpanzees, and gorillas, but higher than orangutans. There were especially pronounced cross-species differences in the levels of plasmalogens with a C16:0 moiety at the sn-1 position. Humans on Western or vegan diets had comparable total RBC plasmalogen levels, but the latter group showed moderately higher levels of plasmalogens with a C18:1 moiety at the sn-1 position. We did not find robust sex-specific differences in human or chimpanzee RBC plasmalogen levels or composition. Furthermore, human and great ape skin fibroblasts showed only modest differences in peroxisomal plasmalogen biosynthetic activity. Human and chimpanzee microarray data indicated that genes involved in plasmalogen biosynthesis show cross-species differential expression in multiple tissues. Conclusion We propose that the observed differences in human and great ape RBC plasmalogens are primarily caused by their rates of biosynthesis and/or turnover. Gene expression data raise the possibility that other human and great ape cells and tissues differ in plasmalogen levels. Based on the phenotypes of humans and

  11. Genetic Differences Between Humans and Great Apes -- Implications for the Evolution of Humans

    Science.gov (United States)

    Varki, Ajit

    2004-06-01

    At the level of individual protein sequences, humans are 97-100% identical to the great apes, our closest evolutionary relatives. The evolution of humans (and of human intelligence) from a common ancestor with the chimpanzee and bonobo involved many steps, influenced by interactions amongst factors of genetic, developmental, ecological, microbial, climatic, behavioral, cultural and social origin. The genetic factors can be approached by direct comparisons of human and great ape genomes, genes and gene products, and by elucidating biochemical and biological consequences of any differences found. We have discovered multiple genetic and biochemical differences between humans and great apes, particularly with respect to a family of cell surface molecules called sialic acids, as well as in the metabolism of thyroid hormones. The hormone differences have potential consequences for human brain development. The differences in sialic acid biology have multiple implications for the human condition, ranging from susceptibility or resistance to microbial pathogens, effects on endogenous receptors in the immune system, and potential effects on placental signaling, expression of oncofetal antigens in cancers, consequences of dietary intake of animal foods, and development of the mammalian brain.

  12. Applying homotopy analysis method for solving differential-difference equation

    International Nuclear Information System (INIS)

    Wang Zhen; Zou Li; Zhang Hongqing

    2007-01-01

    In this Letter, we apply the homotopy analysis method to solving the differential-difference equations. A simple but typical example is applied to illustrate the validity and the great potential of the generalized homotopy analysis method in solving differential-difference equation. Comparisons are made between the results of the proposed method and exact solutions. The results show that the homotopy analysis method is an attractive method in solving the differential-difference equations

  13. A comparison of sediment toxicity test methods at three Great Lake Areas of Concern

    Science.gov (United States)

    Burton, G. Allen; Ingersoll, Christopher G.; Burnett, LouAnn C.; Henry, Mary; Hinman, Mark L.; Klaine, Stephen J.; Landrum, Peter F.; Ross, Phillipe; Tuchman, Marc

    1996-01-01

    The significance of sediment contamination is often evaluated using sediment toxicity (bioassay) testing. There are relatively few “standardized” test methods for evaluating sediments. Popular sediment toxicity methods examine the extractable water (elutriate), interstitial water, or whole (bulk) sediment phases using test species spanning the aquatic food chain from bacteria to fish. The current study was designed to evaluate which toxicity tests were most useful in evaluations of sediment contamination at three Great Lake Areas of Concern. Responses of 24 different organisms including fish, mayflies, amphipods, midges, cladocerans, rotifers, macrophytes, algae, and bacteria were compared using whole sediment or elutriate toxicity assays. Sediments from several sites in the Buffalo River, Calumet River (Indiana Harbor), and Saginaw River were tested, as part of the U.S. Environmental Protection Agency's (USEPA) Assessment and Remediation of Contaminated Sediments (ARCS) Project. Results indicated several assays to be sensitive to sediment toxicity and able to discriminate between differing levels of toxicity. Many of the assay responses were significantly correlated to other toxicity responses and were similar based on factor analysis. For most applications, a test design consisting of two to three assays should adequately detect sediment toxicity, consisting of various groupings of the following species: Hyalella azteca, Ceriodaphnia dubia, Chironomus riparius, Chironomus tentans, Daphnia magna, Pimephales promelas, Hexagenia bilineata, Diporeia sp., Hydrilla verticillata, or Lemna minor.

  14. Gender differences in suicide methods.

    Science.gov (United States)

    Callanan, Valerie J; Davis, Mark S

    2012-06-01

    Gender differences in suicide completion rates have been attributed to the differences in lethality of suicide methods chosen by men and women, but few empirical studies have investigated factors other than demographic characteristics that might explain this differential. Data from the 621 suicides in Summit County, Ohio during 1997-2006 were disaggregated by gender to compare known correlates of suicide risk on three methods of suicide-firearm, hanging and drug poisoning. Compared to women, men who completed suicide with firearms were more likely to be married and committed the act at home. Unmarried men were likelier to hang themselves than married men, but unmarried women were less likely to hang themselves than married women. Men with a history of depression were more likely to suicide by hanging, but women with depression were half as likely to hang themselves compared to the women without a history of depression. Men with a history of substance abuse were more likely to suicide by poisoning than men without such history, but substance abuse history had no influence on women's use of poisoning to suicide. For both sexes, the odds of suicide by poisoning were significantly higher for those on psychiatric medications.

  15. Gender and Personality Differences in Response to Social Stressors in Great Tits (Parus major.

    Directory of Open Access Journals (Sweden)

    Esther van der Meer

    Full Text Available In response to stressors, animals can increase the activity of the hypothalamic-pituitary-adrenocortical axis, resulting in elevated glucocorticoid concentrations. An increase in glucocorticoids results in an increase in heterophils and a decrease in lymphocytes, which ratio (H/L-ratio is an indicator of stress in birds. The physiological response to a stressor can depend on individual characteristics, like dominance rank, sex and personality. Although the isolated effects of these characteristics on the response to a stressor have been well studied, little is known about the response in relation to a combination of these characteristics. In this study we investigate the relationship between social stress, dominance rank, sex and exploratory behaviour as a validated operational measure of personality in great tits (Parus major. Great tits show consistent individual differences in behaviour and physiology in response to stressors, and exploratory behaviour can be classified as fast or slow exploring. We group-housed four birds, two fast and two slow explorers, of the same sex that were previously singly housed, in an aviary and compared the H/L-ratio, lymphocyte and heterophil count before and after group housing. After experiencing the social context all birds increased their H/L-ratio and heterophil count. Females showed a stronger increase in H/L-ratio and heterophil count than males, which seemed to be related to a higher number of agonistic interactions compared to males. Dominance rank and exploration type did not affect the H/L-ratio or heterophil count. Contrary to our expectations, all birds increased their lymphocyte count. However, this increase was slower for fast than for slow explorers. Our study suggests that personality and sex related differences, but not dominance rank, are associated with changes in an individual's physiological response due to a social context.

  16. Great ape origins of personality maturation and sex differences: a study of orangutans and chimpanzees.

    Science.gov (United States)

    Weiss, Alexander; King, James E

    2015-04-01

    Human personality development evinces increased emotional stability, prosocial tendencies, and responsibility. One hypothesis offered to explain this pattern is Social-Investment Theory, which posits that culturally defined social roles, including marriage and employment, are responsible for the increased maturity. Alternatively, Five-Factor Theory emphasizes the role of biological factors, such as those governing physical development, which may predate the emergence of humans. Five-Factor Theory, unlike Social-Investment Theory, predicts that all or some of the human personality developmental trends should be present in great apes, our closest evolutionary relatives. To test this prediction and to better understand the evolutionary origins of sex differences, we examined age and sex differences in the chimpanzee and orangutan personality domains Extraversion, Dominance, Neuroticism, and Agreeableness. We also examined the Activity and Gregariousness facets of Extraversion and the orangutan Intellect domain. Extraversion and Neuroticism declined across age groups in both species, in common with humans. A significant interaction indicated that Agreeableness declined in orangutans but increased in chimpanzees, as it does in humans, though this may reflect differences in how Agreeableness was defined in each species. Significant interactions indicated that male chimpanzees, unlike male orangutans, displayed higher Neuroticism scores than females and maintained higher levels of Activity and Dominance into old age than female chimpanzees, male orangutans, and female orangutans. Personality-age correlations were comparable across orangutans and chimpanzees and were similar to those reported in human studies. Sex differences were stronger in chimpanzees than in humans or orangutans. These findings support Five-Factor Theory, suggest the role of gene-culture coevolution in shaping personality development, and suggest that sex differences evolved independently in different

  17. Differences in the early cognitive development of children and great apes.

    Science.gov (United States)

    Wobber, Victoria; Herrmann, Esther; Hare, Brian; Wrangham, Richard; Tomasello, Michael

    2014-04-01

    There is very little research comparing great ape and human cognition developmentally. In the current studies we compared a cross-sectional sample of 2- to 4-year-old human children (n=48) with a large sample of chimpanzees and bonobos in the same age range (n=42, hereafter: apes) on a broad array of cognitive tasks. We then followed a group of juvenile apes (n=44) longitudinally over 3 years to track their cognitive development in greater detail. In skills of physical cognition (space, causality, quantities), children and apes performed comparably at 2 years of age, but by 4 years of age children were more advanced (whereas apes stayed at their 2-year-old performance levels). In skills of social cognition (communication, social learning, theory of mind), children out-performed apes already at 2 years, and increased this difference even more by 4 years. Patterns of development differed more between children and apes in the social domain than the physical domain, with support for these patterns present in both the cross-sectional and longitudinal ape data sets. These results indicate key differences in the pattern and pace of cognitive development between humans and other apes, particularly in the early emergence of specific social cognitive capacities in humans. Copyright © 2013 Wiley Periodicals, Inc.

  18. Ecological investigations on plant associations in differently disturbed heavy-metal contaminated soils of Great Britain

    Energy Technology Data Exchange (ETDEWEB)

    Ernst, W

    1968-01-01

    In different areas of Great Britain comparing ecological studies have been made on disturbed and undisturbed heavy metal contaminated soils. In Grizedale (Pennine), sampling of an undisturbed transect having high levels of major nutrients showed marked differentiation within a small area, only related to the plant available levels of zinc, copper, and lead. However, studies on disturbed heavy metal soils and spoil-heaps revealed a low water capacity and a low supply of major nutrients, particularly of N and P. These suggest that here both the enrichment of heavy metals and the considerable decrease of other nutrients are important in determining the heavy metal vegetation, and in maintaining it against other species. The quantity of zinc in plants is not related to the total or plant-available amount of zinc in soil, but confirmed physiological experiments on the influence of phosphorus and different zinc compounds (complexed or inorganic) on the uptake and distribution of zinc in Thlaspi alpestre and Minnartia rerum. Also an antagonism between lead and copper was revealed. 24 references.

  19. Deep Learning Methods for Quantifying Invasive Benthic Species in the Great Lakes

    Science.gov (United States)

    Billings, G.; Skinner, K.; Johnson-Roberson, M.

    2017-12-01

    In recent decades, invasive species such as the round goby and dreissenid mussels have greatly impacted the Great Lakes ecosystem. It is critical to monitor these species, model their distribution, and quantify the impacts on the native fisheries and surrounding ecosystem in order to develop an effective management response. However, data collection in underwater environments is challenging and expensive. Furthermore, the round goby is typically found in rocky habitats, which are inaccessible to standard survey techniques such as bottom trawling. In this work we propose a robotic system for visual data collection to automatically detect and quantify invasive round gobies and mussels in the Great Lakes. Robotic platforms equipped with cameras can perform efficient, cost-effective, low-bias benthic surveys. This data collection can be further optimized through automatic detection and annotation of the target species. Deep learning methods have shown success in image recognition tasks. However, these methods often rely on a labelled training dataset, with up to millions of labelled images. Hand labeling large numbers of images is expensive and often impracticable. Furthermore, data collected in the field may be sparse when only considering images that contain the objects of interest. It is easier to collect dense, clean data in controlled lab settings, but this data is not a realistic representation of real field environments. In this work, we propose a deep learning approach to generate a large set of labelled training data realistic of underwater environments in the field. To generate these images, first we draw random sample images of individual fish and mussels from a library of images captured in a controlled lab environment. Next, these randomly drawn samples will be automatically merged into natural background images. Finally, we will use a generative adversarial network (GAN) that incorporates constraints of the physical model of underwater light propagation

  20. Fast egg collection method greatly improves randomness of egg sampling in Drosophila melanogaster

    DEFF Research Database (Denmark)

    Schou, Mads Fristrup

    2013-01-01

    When obtaining samples for population genetic studies, it is essential that the sampling is random. For Drosophila, one of the crucial steps in sampling experimental flies is the collection of eggs. Here an egg collection method is presented, which randomizes the eggs in a water column...... and diminishes environmental variance. This method was compared with a traditional egg collection method where eggs are collected directly from the medium. Within each method the observed and expected standard deviations of egg-to-adult viability were compared, whereby the difference in the randomness...... and to obtain a representative collection of genotypes, the method presented here is strongly recommended when collecting eggs from Drosophila....

  1. Evapotranspiration in winter wheat under different grazing and tillage practices in the southern Great Plains

    Science.gov (United States)

    Precipitation in the Southern Great Plains (SGP) is highly variable both spatially and temporally with recurring periods of severe drought. Winter wheat (Triticum aestivum L.) – summer fallow system with conventional tillage is the principal dryland cropping system in this region for both grazing an...

  2. What Great Teachers Do Differently: Seventeen Things That Matter Most. Second Edition

    Science.gov (United States)

    Whitaker, Todd

    2012-01-01

    In the second edition of this renowned book, you will find pearls of wisdom, heartfelt advice, and inspiration from one of the nation's leading authorities on staff motivation, teacher leadership, and principal effectiveness. With wit and understanding, Todd Whitaker describes the beliefs, behaviors, attitudes, and interactions of great teachers…

  3. Differences in the Nonverbal Requests of Great Apes and Human Infants

    Science.gov (United States)

    van der Goot, Marloes H.; Tomasello, Michael; Liszkowski, Ulf

    2014-01-01

    This study investigated how great apes and human infants use imperative pointing to request objects. In a series of three experiments (infants, N = 44; apes, N = 12), subjects were given the opportunity to either point to a desired object from a distance or else to approach closer and request it proximally. The apes always approached close to the…

  4. Differences in the Nonverbal Requests of Great Apes and Human Infants

    NARCIS (Netherlands)

    van der Goot, M. H.; Tomasello, Michael; Liszkowski, Ulf

    2014-01-01

    This study investigated how great apes and human infants use imperative pointing to request objects. In a series of three experiments (infants, N = 44; apes, N = 12), subjects were given the opportunity to either point to a desired object from a distance or else to approach closer and request it

  5. A method for risk analysis across governance systems: a Great Barrier Reef case study

    International Nuclear Information System (INIS)

    Dale, Allan; Vella, Karen; Potts, Ruth; Pressey, Robert L; Brodie, Jon; Yorkston, Hugh

    2013-01-01

    Healthy governance systems are key to delivering sound environmental management outcomes from global to local scales. There are, however, surprisingly few risk assessment methods that can pinpoint those domains and sub-domains within governance systems that are most likely to influence good environmental outcomes at any particular scale, or those if absent or dysfunctional, most likely to prevent effective environmental management. This paper proposes a new risk assessment method for analysing governance systems. This method is then tested through its preliminary application to a significant real-world context: governance as it relates to the health of Australia’s Great Barrier Reef (GBR). The GBR exists at a supra-regional scale along most of the north eastern coast of Australia. Brodie et al (2012 Mar. Pollut. Bull. 65 81–100) have recently reviewed the state and trend of the health of the GBR, finding that overall trends remain of significant concern. At the same time, official international concern over the governance of the reef has recently been signalled globally by the International Union for the Conservation of Nature (IUCN). These environmental and political contexts make the GBR an ideal candidate for use in testing and reviewing the application of improved tools for governance risk assessment. (letter)

  6. Identification of differences in human and great ape phytanic acid metabolism that could influence gene expression profiles and physiological functions

    Directory of Open Access Journals (Sweden)

    Siegmund Kimberly D

    2010-10-01

    Full Text Available Abstract Background It has been proposed that anatomical differences in human and great ape guts arose in response to species-specific diets and energy demands. To investigate functional genomic consequences of these differences, we compared their physiological levels of phytanic acid, a branched chain fatty acid that can be derived from the microbial degradation of chlorophyll in ruminant guts. Humans who accumulate large stores of phytanic acid commonly develop cerebellar ataxia, peripheral polyneuropathy, and retinitis pigmentosa in addition to other medical conditions. Furthermore, phytanic acid is an activator of the PPAR-alpha transcription factor that influences the expression of genes relevant to lipid metabolism. Results Despite their trace dietary phytanic acid intake, all great ape species had elevated red blood cell (RBC phytanic acid levels relative to humans on diverse diets. Unlike humans, chimpanzees showed sexual dimorphism in RBC phytanic acid levels, which were higher in males relative to females. Cultured skin fibroblasts from all species had a robust capacity to degrade phytanic acid. We provide indirect evidence that great apes, in contrast to humans, derive significant amounts of phytanic acid from the hindgut fermentation of plant materials. This would represent a novel reduction of metabolic activity in humans relative to the great apes. Conclusion We identified differences in the physiological levels of phytanic acid in humans and great apes and propose this is causally related to their gut anatomies and microbiomes. Phytanic acid levels could contribute to cross-species and sex-specific differences in human and great ape transcriptomes, especially those related to lipid metabolism. Based on the medical conditions caused by phytanic acid accumulation, we suggest that differences in phytanic acid metabolism could influence the functions of human and great ape nervous, cardiovascular, and skeletal systems.

  7. Free-standing graphene films prepared via foam film method for great capacitive flexible supercapacitors

    Science.gov (United States)

    Zhu, Yucan; Ye, Xingke; Tang, Zhonghua; Wan, Zhongquan; Jia, Chunyang

    2017-11-01

    Recently, graphene films have always attracted attention due to their excellent characteristics in energy storage. In this work, a novel graphene oxide (GO) film with excellent mechanical properties, whose thickness was regulated simply via changing the concentration of the surfactant, was successfully prepared by foam film method. After chemical reduction, the reduced GO (rGO) films have excellent electrical conductivity of ∼172 S cm-1. Moreover, the supercapacitors based on the rGO films exhibit satisfied capacitive performance of ∼56 mF cm-2 at 0.2 mA cm-2 in 6 M KOH aqueous solution. Meanwhile, the flexible all solid state supercapacitors (FSSCs) based on the rGO films also show great volumetric capacitance of ∼2810 mF cm-3 at 12 mA cm-3 (∼1607 mF cm-3 at 613 mA cm-3) with polyvinyl alcohol-KOH gel electrolyte. Besides, after 10000 cycles and continuously bent to 180° for 300 times, the volumetric capacitance of the FSSC remains at 81.4% and 90.4% of its initial capacitance value, respectively. Therefore, the free-standing rGO films prepared via foam film method could be considered as promising electrode materials for high performance flexible supercapacitors.

  8. A method to add richness to the National Landslide Database of Great Britain

    Science.gov (United States)

    Taylor, Faith; Freeborough, Katy; Malamud, Bruce; Demeritt, David

    2014-05-01

    Landslides in Great Britain (GB) pose a risk to infrastructure, property and livelihoods. Our understanding of where landslide hazard and impact will be greatest is based on our knowledge of past events. Here, we present a method to supplement existing records of landslides in GB by searching electronic archives of local and regional newspapers. In Great Britain, the British Geological Survey (BGS) are responsible for updating and maintaining records of GB landslide events and their impacts in the National Landslide Database (NLD). The NLD contains records of approximately 16,500 landslide events in Great Britain. Data sources for the NLD include field surveys, academic articles, grey literature, news, public reports and, since 2012, social media. Here we aim to supplement the richness of the NLD by (i) identifying additional landslide events and (ii) adding more detail to existing database entries. This is done by systematically searching the LexisNexis digital archive of 568 local and regional newspapers published in the UK. The first step in the methodology was to construct Boolean search criteria that optimised the balance between minimising the number of irrelevant articles (e.g. "a landslide victory") and maximising those referring to landslide events. This keyword search was then applied to the LexisNexis archive of newspapers for all articles published between 1 January and 31 December 2012, resulting in 1,668 articles. These articles were assessed to determine whether they related to a landslide event. Of the 1,668 articles, approximately 30% (~700) referred to landslide events, with others referring to landslides more generally or themes unrelated to landslides. Examples of information obtained from newspaper articles included: date/time of landslide occurrence, spatial location, size, impact, landslide type and triggering mechanism, although the amount of detail and precision attainable from individual articles was variable. Of the 700 articles found for

  9. Generalized differential transform method to differential-difference equation

    International Nuclear Information System (INIS)

    Zou Li; Wang Zhen; Zong Zhi

    2009-01-01

    In this Letter, we generalize the differential transform method to solve differential-difference equation for the first time. Two simple but typical examples are applied to illustrate the validity and the great potential of the generalized differential transform method in solving differential-difference equation. A Pade technique is also introduced and combined with GDTM in aim of extending the convergence area of presented series solutions. Comparisons are made between the results of the proposed method and exact solutions. Then we apply the differential transform method to the discrete KdV equation and the discrete mKdV equation, and successfully obtain solitary wave solutions. The results reveal that the proposed method is very effective and simple. We should point out that generalized differential transform method is also easy to be applied to other nonlinear differential-difference equation.

  10. Primate social attention: Species differences and effects of individual experience in humans, great apes, and macaques

    OpenAIRE

    Kano, Fumihiro; Shepherd, Stephen V.; Hirata, Satoshi; Call, Josep

    2018-01-01

    When viewing social scenes, humans and nonhuman primates focus on particular features, such as the models’ eyes, mouth, and action targets. Previous studies reported that such viewing patterns vary significantly across individuals in humans, and also across closely-related primate species. However, the nature of these individual and species differences remains unclear, particularly among nonhuman primates. In large samples of human and nonhuman primates, we examined species differences and th...

  11. Abstract Level Parallelization of Finite Difference Methods

    Directory of Open Access Journals (Sweden)

    Edwin Vollebregt

    1997-01-01

    Full Text Available A formalism is proposed for describing finite difference calculations in an abstract way. The formalism consists of index sets and stencils, for characterizing the structure of sets of data items and interactions between data items (“neighbouring relations”. The formalism provides a means for lifting programming to a more abstract level. This simplifies the tasks of performance analysis and verification of correctness, and opens the way for automaticcode generation. The notation is particularly useful in parallelization, for the systematic construction of parallel programs in a process/channel programming paradigm (e.g., message passing. This is important because message passing, unfortunately, still is the only approach that leads to acceptable performance for many more unstructured or irregular problems on parallel computers that have non-uniform memory access times. It will be shown that the use of index sets and stencils greatly simplifies the determination of which data must be exchanged between different computing processes.

  12. Thermodynamic and Turbulence Characteristics of the Southern Great Plains Nocturnal Boundary Layer Under Differing Turbulent Regimes

    Science.gov (United States)

    Bonin, Timothy A.; Blumberg, William G.; Klein, Petra M.; Chilson, Phillip B.

    2015-12-01

    The nocturnal stable boundary layer (SBL) can generally be classified into the weakly stable boundary layer (wSBL) and very stable boundary layer (vSBL). Within the wSBL, turbulence is relatively continuous, whereas in the vSBL, turbulence is intermittent and not well characterized. Differentiating characteristics of each type of SBL are still unknown. Herein, thermodynamic and kinematic data collected by a suite of instruments in north central Oklahoma in autumn 2012 are analyzed to better understand both SBL regimes and their differentiating characteristics. Many low-level jets were observed during the experiment, as it took place near a climatological maximum. A threshold wind speed, above which bulk shear-generated turbulence develops, is found to exist up to 300 m. The threshold wind speed must also be exceeded at lower heights (down to the surface) in order for strong turbulence to develop. Composite profiles, which are normalized using low-level jet scaling, of potential temperature, wind speed, vertical velocity variance, and the third-order moment of vertical velocity (overline{w'^3}) are produced for weak and moderate/strong turbulence regimes, which exhibit features of the vSBL and wSBL, respectively. Within the wSBL, turbulence is generated at the surface and transported upward. In the vSBL, values of vertical velocity variance are small throughout the entire boundary layer, likely due to the fact that a strong surface inversion typically forms after sunset. The temperature profile tends to be approximately isothermal in the lowest portions of the wSBL, and it did not substantially change over the night. Within both types of SBL, stability in the residual layer tends to increase as the night progresses. It is thought that this stability increase is due to differential warm air advection, which frequently occurs in the southern Great Plains when southerly low-level jets and a typical north-south temperature gradient are present. Differential radiative

  13. Gender Differences in Mental Health Outcomes before, during, and after the Great Recession.

    Science.gov (United States)

    Dagher, Rada K; Chen, Jie; Thomas, Stephen B

    2015-01-01

    We examined gender differences in mental health outcomes during and post-recession versus pre-recession. We utilized 2005-2006, 2008-2009, and 2010-2011 data from the Medical Expenditure Panel Survey. Females had lower odds of depression diagnoses during and post-recession and better mental health during the recession, but higher odds of anxiety diagnoses post-recession. Males had lower odds of depression diagnoses and better mental health during and post-recession and lower Kessler 6 scores post-recession. We conducted stratified analyses, which confirmed that the aforementioned findings were consistent across the four different regions of the U.S., by employment status, income and health care utilization. Importantly, we found that the higher odds of anxiety diagnoses among females after the recession were mainly prominent among specific subgroups of females: those who lived in the Northeast or the Midwest, the unemployed, and those with low household income. Gender differences in mental health in association with the economic recession highlight the importance of policymakers taking these differences into consideration when designing economic and social policies to address economic downturns. Future research should examine the reasons behind the decreased depression diagnoses among both genders, and whether they signify decreased mental healthcare utilization or increased social support and more time for exercise and leisure activities.

  14. Primate social attention: Species differences and effects of individual experience in humans, great apes, and macaques.

    Directory of Open Access Journals (Sweden)

    Fumihiro Kano

    Full Text Available When viewing social scenes, humans and nonhuman primates focus on particular features, such as the models' eyes, mouth, and action targets. Previous studies reported that such viewing patterns vary significantly across individuals in humans, and also across closely-related primate species. However, the nature of these individual and species differences remains unclear, particularly among nonhuman primates. In large samples of human and nonhuman primates, we examined species differences and the effects of experience on patterns of gaze toward social movies. Experiment 1 examined the species differences across rhesus macaques, nonhuman apes (bonobos, chimpanzees, and orangutans, and humans while they viewed movies of various animals' species-typical behaviors. We found that each species had distinct viewing patterns of the models' faces, eyes, mouths, and action targets. Experiment 2 tested the effect of individuals' experience on chimpanzee and human viewing patterns. We presented movies depicting natural behaviors of chimpanzees to three groups of chimpanzees (individuals from a zoo, a sanctuary, and a research institute differing in their early social and physical experiences. We also presented the same movies to human adults and children differing in their expertise with chimpanzees (experts vs. novices or movie-viewing generally (adults vs. preschoolers. Individuals varied within each species in their patterns of gaze toward models' faces, eyes, mouths, and action targets depending on their unique individual experiences. We thus found that the viewing patterns for social stimuli are both individual- and species-specific in these closely-related primates. Such individual/species-specificities are likely related to both individual experience and species-typical temperament, suggesting that primate individuals acquire their unique attentional biases through both ontogeny and evolution. Such unique attentional biases may help them learn

  15. Primate social attention: Species differences and effects of individual experience in humans, great apes, and macaques.

    Science.gov (United States)

    Kano, Fumihiro; Shepherd, Stephen V; Hirata, Satoshi; Call, Josep

    2018-01-01

    When viewing social scenes, humans and nonhuman primates focus on particular features, such as the models' eyes, mouth, and action targets. Previous studies reported that such viewing patterns vary significantly across individuals in humans, and also across closely-related primate species. However, the nature of these individual and species differences remains unclear, particularly among nonhuman primates. In large samples of human and nonhuman primates, we examined species differences and the effects of experience on patterns of gaze toward social movies. Experiment 1 examined the species differences across rhesus macaques, nonhuman apes (bonobos, chimpanzees, and orangutans), and humans while they viewed movies of various animals' species-typical behaviors. We found that each species had distinct viewing patterns of the models' faces, eyes, mouths, and action targets. Experiment 2 tested the effect of individuals' experience on chimpanzee and human viewing patterns. We presented movies depicting natural behaviors of chimpanzees to three groups of chimpanzees (individuals from a zoo, a sanctuary, and a research institute) differing in their early social and physical experiences. We also presented the same movies to human adults and children differing in their expertise with chimpanzees (experts vs. novices) or movie-viewing generally (adults vs. preschoolers). Individuals varied within each species in their patterns of gaze toward models' faces, eyes, mouths, and action targets depending on their unique individual experiences. We thus found that the viewing patterns for social stimuli are both individual- and species-specific in these closely-related primates. Such individual/species-specificities are likely related to both individual experience and species-typical temperament, suggesting that primate individuals acquire their unique attentional biases through both ontogeny and evolution. Such unique attentional biases may help them learn efficiently about their

  16. Evaluation of thermal, chemical, and mechanical seed scarification methods for 4 Great Basin lupine species

    Science.gov (United States)

    Covy D. Jones; Mikel R. Stevens; Von D. Jolley; Bryan G. Hopkins; Scott L. Jensen; Dave Turner; Jason M. Stettler

    2016-01-01

    Seeds of most Great Basin lupine (Lupinus spp. [Fabaceae]) species are physically dormant and thus, difficult to establish in uniform stands in seed production fields. We designed this study to examine 5 seed scarification techniques, each with 11 levels of application (including a non-scarified control), to reduce the physical seed dormancy of longspur lupine...

  17. Time-dependent problems and difference methods

    CERN Document Server

    Gustafsson, Bertil; Oliger, Joseph

    2013-01-01

    Praise for the First Edition "". . . fills a considerable gap in the numerical analysis literature by providing a self-contained treatment . . . this is an important work written in a clear style . . . warmly recommended to any graduate student or researcher in the field of the numerical solution of partial differential equations."" -SIAM Review Time-Dependent Problems and Difference Methods, Second Edition continues to provide guidance for the analysis of difference methods for computing approximate solutions to partial differential equations for time-de

  18. Buoyancy differences among two deepwater ciscoes from the Great Lakes and their putative ancestor

    Science.gov (United States)

    Krause, A.E.; Eshenroder, R.L.; Begnoche, L.J.

    2002-01-01

    We analyzed buoyancy in two deepwater ciscoes, Coregonus hoyi and C. kiyi, and in C. artedi, their putative ancestor, and also analyzed how variations in fish weight, water content, and lipid content affected buoyancy. Buoyancy was significantly different among the three species (p < 0.0001). Estimates of percent buoyancy (neutral buoyancy = 0.0%) were: kiyi, 3.8%; hoyi, 4.7%; and artedi, 5.7%. Buoyancy did not change with fish weight alone (p = 0.38). Fish weight was negatively related to water content for all three species (p = 0.037). Lipid content was not significantly different between hoyi and kiyi, but artedi had significantly fewer lipids than hoyi and kiyi (p < 0.10). When artedi was removed from the analysis, fish weight and lipids accounted for 48% of the variation in buoyancy (p = 0.003), fatter hoyi were less dense than leaner hoyi, but fatter and leaner kiyi were no different in density. Our findings provide additional evidence that buoyancy regulation was a speciating mechanism in deepwater ciscoes and that kiyi is more specialized than hoyi for diel-vertical migration in deep water.

  19. Different partial volume correction methods lead to different conclusions

    DEFF Research Database (Denmark)

    Greve, Douglas N; Salat, David H; Bowen, Spencer L

    2016-01-01

    A cross-sectional group study of the effects of aging on brain metabolism as measured with (18)F-FDG-PET was performed using several different partial volume correction (PVC) methods: no correction (NoPVC), Meltzer (MZ), Müller-Gärtner (MG), and the symmetric geometric transfer matrix (SGTM) usin...

  20. Different methods of tomography in destructive pulmonary tuberculosis

    International Nuclear Information System (INIS)

    Volodina, G.I.; Semenov, V.M.

    1980-01-01

    Altogether 203 patients (186 with destructive pulmonary tuberculosis, 11 with other forms of tuberculosis of respiratory tract organs, 6 with lung malignant tumor) were examined with the use of different modifications of tomography: longitudinal and oblique blurring, zonography, selective tomography. Standardization in the use of different methods is proposed, depending on the intensity of the main syndromes of pulmonary tissue lesions: limited shading, foci, dissemination, caverns, etc. The informativeness is greatly increased when the proposed algorithm of examination is used both at the disease onset and during the follow-up of patients with destructive pulmonary tuberculosis

  1. Subcellular differences in handling Cu excess in three freshwater fish species contributes greatly to their differences in sensitivity to Cu

    International Nuclear Information System (INIS)

    Eyckmans, Marleen; Blust, Ronny; De Boeck, Gudrun

    2012-01-01

    Since changes in metal distribution among tissues and subcellular fractions can provide insights in metal toxicity and tolerance, we investigated this partitioning of Cu in gill and liver tissue of rainbow trout (Oncorhynchus mykiss), common carp (Cyprinus carpio) and gibel carp (Carassius auratus gibelio). These fish species are known to differ in their sensitivity to Cu exposure with gibel carp being the most tolerant and rainbow trout the most sensitive. After an exposure to 50 μg/l (0.79 μM) Cu for 24 h, 3 days, 1 week and 1 month, gills and liver of control and exposed fish were submitted to a differential centrifugation procedure. Interestingly, there was a difference in accumulated Cu in the three fish species, even in control fishes. Where the liver of rainbow trout showed extremely high Cu concentrations under control conditions, the amount of Cu accumulated in their gills was much less than in common and gibel carp. At the subcellular level, the gills of rainbow trout appeared to distribute the additional Cu exclusively in the biologically active metal pool (BAM; contains heat-denaturable fraction and organelle fraction). A similar response could be seen in gill tissue of common carp, although the percentage of Cu in the BAM of common carp was lower compared to rainbow trout. Gill tissue of gibel carp accumulated more Cu in the biologically inactive metal pool (BIM compared to BAM; contains heat-stable fraction and metal-rich granule fraction). The liver of rainbow trout seemed much more adequate in handling the excess Cu (compared to its gills), since the storage of Cu in the BIM increased. Furthermore, the high % of Cu in the metal-rich granule fraction and heat-stable fraction in the liver of common carp and especially gibel carp together with the better Cu handling in gill tissue, pointed out the ability of the carp species to minimize the disadvantages related to Cu stress. The differences in Cu distribution at the subcellular level of gills and

  2. Subcellular differences in handling Cu excess in three freshwater fish species contributes greatly to their differences in sensitivity to Cu

    Energy Technology Data Exchange (ETDEWEB)

    Eyckmans, Marleen, E-mail: marleen.eyckmans@ua.ac.be [Laboratory for Ecophysiology, Biochemistry and Toxicology, University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp (Belgium); Blust, Ronny; De Boeck, Gudrun [Laboratory for Ecophysiology, Biochemistry and Toxicology, University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp (Belgium)

    2012-08-15

    Since changes in metal distribution among tissues and subcellular fractions can provide insights in metal toxicity and tolerance, we investigated this partitioning of Cu in gill and liver tissue of rainbow trout (Oncorhynchus mykiss), common carp (Cyprinus carpio) and gibel carp (Carassius auratus gibelio). These fish species are known to differ in their sensitivity to Cu exposure with gibel carp being the most tolerant and rainbow trout the most sensitive. After an exposure to 50 {mu}g/l (0.79 {mu}M) Cu for 24 h, 3 days, 1 week and 1 month, gills and liver of control and exposed fish were submitted to a differential centrifugation procedure. Interestingly, there was a difference in accumulated Cu in the three fish species, even in control fishes. Where the liver of rainbow trout showed extremely high Cu concentrations under control conditions, the amount of Cu accumulated in their gills was much less than in common and gibel carp. At the subcellular level, the gills of rainbow trout appeared to distribute the additional Cu exclusively in the biologically active metal pool (BAM; contains heat-denaturable fraction and organelle fraction). A similar response could be seen in gill tissue of common carp, although the percentage of Cu in the BAM of common carp was lower compared to rainbow trout. Gill tissue of gibel carp accumulated more Cu in the biologically inactive metal pool (BIM compared to BAM; contains heat-stable fraction and metal-rich granule fraction). The liver of rainbow trout seemed much more adequate in handling the excess Cu (compared to its gills), since the storage of Cu in the BIM increased. Furthermore, the high % of Cu in the metal-rich granule fraction and heat-stable fraction in the liver of common carp and especially gibel carp together with the better Cu handling in gill tissue, pointed out the ability of the carp species to minimize the disadvantages related to Cu stress. The differences in Cu distribution at the subcellular level of gills

  3. Assessing trail conditions in protected areas: Application of a problem-assessment method in Great Smoky Mountains National Park, USA

    Science.gov (United States)

    Leung, Y.-F.; Marion, J.

    1999-01-01

    The degradation of trail resources associated with expanding recreation and tourism visitation is a growing management problem in protected areas worldwide. In order to make judicious trail and visitor management decisions, protected area managers need objective and timely information on trail resource conditions. This paper introduces a trail survey method that efficiently characterizes the lineal extent of common trail problems. The method was applied to a large sample of trails within Great Smoky Mountains National Park, a highuse protected area in the USA. The Trail ProblemAssessment Method (TPAM) employs a continuous search for multiple indicators of predefined tread problems, yielding census data documenting the location, occurrence and extent of each problem. The present application employed 23 different indicators in three categories to gather inventory, resource condition, and design and maintenance data of each surveyed trail. Seventy-two backcountry hiking trails (528 km), or 35% of the Park's total trail length, were surveyed. Soil erosion and wet soil were found to be the two most common impacts on a lineal extent basis. Trails with serious tread problems were well distributed throughout the Park, although wet muddy treads tended to be concentrated in areas where horse use was high. The effectiveness of maintenance features installed to divert water from trail treads was also evaluated. Water bars were found to be more effective than drainage dips. The TPAM was able to provide Park managers with objective and quantitative information for use in trail planning, management and maintenance decisions, and is applicable to other protected areas elsewhere with different environmental and impact characteristics.

  4. Why Different Drought Indexes Show Distinct Future Drought Risk Outcomes in the U.S. Great Plains?

    Science.gov (United States)

    Feng, S.; Hayes, M. J.; Trnka, M.

    2015-12-01

    Vigorous discussions and disagreements about the future changes in drought intensity in the US Great Plains have been taking place recently within the literature. These discussions have involved widely varying estimates based on drought indices and model-based projections of the future. To investigate and understand the causes for such a disparity between these previous estimates, we analyzed 10 commonly-used drought indexes using the output from 26 state-of-the-art climate models. These drought indices were computed using potential evapotranspiration estimated by the physically-based Penman-Monteith method (PE_pm) and the empirically-based Thornthwaite method (PE_th). The results showed that the short-term drought indicators are similar to modeled surface soil moisture and show a small but consistent drying trend in the future. The long-term drought indicators and the total column soil moisture, however, are consistent in projecting more intense future drought. When normalized, the drought indices with PE_th all show unprecedented and possibly unrealistic future drying, while the drought indices with PE_pm show comparable dryness with the modeled soil moisture. Additionally, the drought indices with PE_pm are closely related to soil moisture during both the 20th and 21st Centuries. Overall, the drought indices with PE_pm, as well as the modeled total column soil moisture, suggest a widespread and very significant drying of the Great Plains region toward the end of the Century. Our results suggested that the sharp contracts about future drought risk in the Great Plains discussed in previous studies are caused by 1) comparing the projected changes in short-term droughts with that of the long-term droughts, and/or 2) computing the atmospheric evaporative demand using the empirically-based method (e.g., PE_th). Our analysis may be applied for drought projections in other regions across the globe.

  5. Maintenance Approaches for Different Production Methods

    Directory of Open Access Journals (Sweden)

    Mungani, Dzivhuluwani Simon

    2013-11-01

    Full Text Available Various production methods are used in industry to manufacture or produce a variety of products needed by industry and consumers. The nature of a product determines which production method is most suitable or cost-effective. A continuous process is typically used to produce large volumes of liquids or gases. Batch processing is often used for small volumes, such as pharmaceutical products. This paper discusses a research project to determine the relationship between maintenance approaches and production methods. A survey was done to determine to what extent three maintenance approaches reliability-centred maintenance (RCM, total productive maintenance (TPM, and business-centred maintenance (BCM are used for three different processing methods (continuous process, batch process, and a production line method.

  6. Enamel hypoplasia in deciduous teeth of great apes: do differences in defect prevalence imply differential levels of physiological stress?

    Science.gov (United States)

    Lukacs, J R

    1999-11-01

    This paper presents new data on enamel hypoplasia in the deciduous canine teeth of great apes. The enamel defect under consideration is known as localized hypoplasia of primary canines (LHPC), and is characterized by an area of thin or missing enamel on the labial surface of deciduous canine teeth (Skinner [1986a] Am. J. Phys. Anthropol. 69:59-69). Goals of this study are: 1) to determine if significant differences in the frequency of LHPC occur among three genera of great apes, and 2) to evaluate variation in LHPC prevalence among great apes as evidence of differential physiological stress. Infant and juvenile apes with deciduous teeth were examined at the Cleveland Museum of Natural History (n = 100) and at the Smithsonian Institution, National Museum of Natural History (n = 36). Deciduous teeth were observed under oblique incandescent light, with the naked eye and with a 10x hand lens. Enamel hypoplasia was scored using Federation Dentaire International (FDI)-Defects of Dental Enamel (DDE) standards. Hypoplasias were recorded by drawing defect location and size on a dental chart, and by measuring defect size and location with Helios needlepoint dial calipers. The prevalence of LHPC is reported by genus and sex, using two approaches: 1) the frequency of affected individuals-those having one or more deciduous canine teeth scored positive for LHPC; and 2) the number of canine teeth scored positive for LHPC as a percentage of all canine teeth observed. Variation in defect size and location will be described elsewhere. Localized hypoplasia of primary canine teeth was found in 62.5% of 128 individual apes, and in 45.5% of 398 great ape deciduous canines. As in humans, LHPC is the most common form of enamel hypoplasia in deciduous teeth of great apes, while LEH is rare or absent. The distribution and pattern of expression of LHPC in great apes is similar to that described in humans: side differences are not significant, but mandibular canines exhibit the defect two to

  7. Comparative studies on different molecular methods for ...

    African Journals Online (AJOL)

    The present study aims to evaluate two molecular methods for epidemiological typing of multi drug resistant Klebsiella pneumoniae isolated from Mansoura Hospitals. In this study, a total of 300 clinical isolates were collected from different patients distributed among Mansoura Hospitals, Dakahlia governorate, Egypt.

  8. SPEED POWER AFTER DIFFERENT TRAINING METHODS

    Directory of Open Access Journals (Sweden)

    Milan Gužvica

    2011-09-01

    Full Text Available As the strength is a very important capability, with which are more or less, related and all other motor skills relevant to the successful conduct of sports fight in karate, we were interested in what extent the ability of the speed of force development changes under the influence of different types of loads. For this purpose we used two different methods: the development of speed power with weights and plyometric method. Research is organized on a sample of 20 subjects (first year students of the College of Internal Affairs in Banja Luka, divided into two groups, of which only 12 students responded to the demands of research. The program was implemented during the period of six weeks for two hours per week. Before beginning and three days after the training process, we also tested levels of speed power using eight specific motor tests. After completion of the initial and final measurements, data were analyzed by appropriate statistical procedures, where all respondents, across the various tests, achieved better results. However, statistically significant differences were not obtained in both groups. Specifically, statistically significant differences were obtained in the group T across the various tests, while in group P, statistically significant differences were not obtained in three tests conducted. Given results allowed us that, with caution, we conclude that the method of working with weights, in a limited period of time, when it comes to beginners, is still more efficient than the plyometric method of work. Therefore recommendation for increasing the speed power, in a limited period of time, is to use a method of working with weights.

  9. Composition of physiologically important fatty acids in great tits differs between urban and rural populations on a seasonal basis

    Directory of Open Access Journals (Sweden)

    Martin N Andersson

    2015-08-01

    Full Text Available Fatty acids (FA have crucial functions in animals, affecting e.g. inflammatory responses, thermoregulation, and cell membrane fluidity. Diet and ambient temperature affect animals’ FA composition, which, in turn, may influence these physiological processes. Great tits (Parus major −common in both urban and rural habitats− are mainly granivorous during winter and insectivorous during summer. These diets show pronounced differences in FA composition. Such variation has context-dependent effects on physiology, because the thermal environment, food availability, and levels of pro-inflammatory environmental stressors differ between urban and rural areas. Thus, we investigated how great tit plasma FA composition varied between urban and rural habitats and across seasons. Eight FAs differed between urban and rural birds. Among these, arachidonic acid (omega (ω-6 polyunsaturated FA with thermoregulatory and pro-inflammatory properties was more abundant in urban than rural birds in winter, whereas ω-3 FAs with anti-inflammatory properties were more abundant in rural birds. The difference in pro- and anti-inflammatory FAs suggest that the negative health effects that urban birds suffer from being exposed to higher levels of pollutants might be enhanced by an elevated inflammatory response. Eight FAs differed between winter and summer birds. This variation reflected the diet change: FAs common in seeds, e.g. oleic- and linoleic acid, were present in higher amounts in winter birds, whereas ω-3 polyunsaturated FAs that are common in caterpillars were more abundant in summer birds. Overall, a larger seasonal variation was seen among the urban birds. This study is the first to reveal a difference in FA composition between urban and rural populations for all animals studied to date. Future experiments should unravel the physiological implications of this variation, and ultimately, link its effects to fitness of animals with different physiological and

  10. Fuzzy logic controller using different inference methods

    International Nuclear Information System (INIS)

    Liu, Z.; De Keyser, R.

    1994-01-01

    In this paper the design of fuzzy controllers by using different inference methods is introduced. Configuration of the fuzzy controllers includes a general rule-base which is a collection of fuzzy PI or PD rules, the triangular fuzzy data model and a centre of gravity defuzzification algorithm. The generalized modus ponens (GMP) is used with the minimum operator of the triangular norm. Under the sup-min inference rule, six fuzzy implication operators are employed to calculate the fuzzy look-up tables for each rule base. The performance is tested in simulated systems with MATLAB/SIMULINK. Results show the effects of using the fuzzy controllers with different inference methods and applied to different test processes

  11. Finite-Difference Frequency-Domain Method in Nanophotonics

    DEFF Research Database (Denmark)

    Ivinskaya, Aliaksandra

    Optics and photonics are exciting, rapidly developing fields building their success largely on use of more and more elaborate artificially made, nanostructured materials. To further advance our understanding of light-matter interactions in these complicated artificial media, numerical modeling...... is often indispensable. This thesis presents the development of rigorous finite-difference method, a very general tool to solve Maxwell’s equations in arbitrary geometries in three dimensions, with an emphasis on the frequency-domain formulation. Enhanced performance of the perfectly matched layers...... is obtained through free space squeezing technique, and nonuniform orthogonal grids are built to greatly improve the accuracy of simulations of highly heterogeneous nanostructures. Examples of the use of the finite-difference frequency-domain method in this thesis range from simulating localized modes...

  12. Comparison between calibration methods of ionization chamber type pencil in greatness P_K_L

    International Nuclear Information System (INIS)

    Macedo, E.M.; Pereira, L.C.S.; Ferreira, M.J.; Navarro, V.C.C.; Garcia, I.F.M.; Pires, E.J.; Navarro, M.V.T.

    2016-01-01

    Calibration of radiation meters is indispensable on Quality Assurance Program in Radiodiagnostic procedures, mainly Computed Tomography. Thus, this study aims evaluate two calibration methods of pencil ionization chambers in terms of Kerma-length Product (P_K_L) (a direct substitution method and an indirect one, through Kerma and length measurements). The results showed a good equivalence, with minimal concordance of 98,5% between calibration factors. About uncertainties, both showed similar results (substitution 2.2% and indirect 2.3%), indicating that the last one is better, due the costs reduction to implant this calibration procedure. (author)

  13. Mapping Depositional Facies on Great Bahama Bank: An Integration of Groundtruthing and Remote Sensing Methods

    Science.gov (United States)

    Hariss, M.; Purkis, S.; Ellis, J. M.; Swart, P. K.; Reijmer, J.

    2013-12-01

    Great Bahama Bank (GBB) has been used in many models to illustrate depositional facies variation across flat-topped, isolated carbonate platforms. Such models have served as subsurface analogs at a variety of scales. In this presentation we have integrated Landsat TM imagery, a refined bathymetric digital elevation model, and seafloor sample data compiled into ArcGIS and analyzed with eCognition to develop a depositional facies map that is more robust than previous versions. For the portion of the GBB lying to the west of Andros Island, the facies map was generated by pairing an extensive set of GPS-constrained field observations and samples (n=275) (Reijmer et al., 2009, IAS Spec Pub 41) with computer and manual interpretation of the Landsat imagery. For the remainder of the platform, which lacked such rigorous ground-control, the Landsat imagery was segmented into lithotopes - interpreted to be distinct bodies of uniform sediment - using a combination of edge detection, spectral and textural analysis, and manual editing. A map was then developed by assigning lithotopes to facies classes on the basis of lessons derived from the portion of the platform for which we had rigorous conditioning. The new analysis reveals that GBB is essentially a very grainy platform with muddier accumulations only in the lee of substantial island barriers; in this regard Andros Island, which is the largest island on GBB, exerts a direct control over the muddiest portion of GBB. Mudstones, wackestones, and mud-rich packstones cover 7%, 6%, and 15%, respectively, of the GBB platform top. By contrast, mud-poor packstones, grainstones, and rudstones account for 19%, 44%, and 3%, respectively. Of the 44% of the platform-top classified as grainstone, only 4% is composed of 'high-energy' deposits characterized by the development of sandbar complexes. The diversity and size of facies bodies is broadly the same on the eastern and western limb of the GBB platform, though the narrower eastern

  14. Evaluation of toothbrush disinfection via different methods

    Directory of Open Access Journals (Sweden)

    Adil BASMAN

    2016-01-01

    Full Text Available The aim of this study was to compare the efficacy of using a dishwasher or different chemical agents, including 0.12% chlorhexidine gluconate, 2% sodium hypochlorite (NaOCl, a mouthrinse containing essential oils and alcohol, and 50% white vinegar, for toothbrush disinfection. Sixty volunteers were divided into five experimental groups and one control group (n = 10. Participants brushed their teeth using toothbrushes with standard bristles, and they disinfected the toothbrushes according to instructed methods. Bacterial contamination of the toothbrushes was compared between the experimental groups and the control group. Data were analyzed by Kruskal–Wallis and Duncan's multiple range tests, with 95% confidence intervals for multiple comparisons. Bacterial contamination of toothbrushes from individuals in the experimental groups differed from those in the control group (p < 0.05. The most effective method for elimination of all tested bacterial species was 50% white vinegar, followed in order by 2% NaOCl, mouthrinse containing essential oils and alcohol, 0.12% chlorhexidine gluconate, dishwasher use, and tap water (control. The results of this study show that the most effective method for disinfecting toothbrushes was submersion in 50% white vinegar, which is cost-effective, easy to access, and appropriate for household use.

  15. Environmental impact from different modes of transport. Method of comparison

    International Nuclear Information System (INIS)

    2002-03-01

    A prerequisite of long-term sustainable development is that activities of various kinds are adjusted to what humans and the natural world can tolerate. Transport is an activity that affects humans and the environment to a very great extent and in this project, several actors within the transport sector have together laid the foundation for the development of a comparative method to be able to compare the environmental impact at the different stages along the transport chain. The method analyses the effects of different transport concepts on the climate, noise levels, human health, acidification, land use and ozone depletion. Within the framework of the method, a calculation model has been created in Excel which acts as a basis for the comparisons. The user can choose to download the model from the Swedish EPA's on-line bookstore or order it on a floppy disk. Neither the method nor the model are as yet fully developed but our hope is that they can still be used in their present form as a basis and inspire further efforts and research in the field. In the report, we describe most of these shortcomings, the problems associated with the work and the existing development potential. This publication should be seen as the first stage in the development of a method of comparison between different modes of transport in non-monetary terms where there remains a considerable need for further development and amplification

  16. Why don't we ask? A complementary method for assessing the status of great apes.

    Directory of Open Access Journals (Sweden)

    Erik Meijaard

    Full Text Available Species conservation is difficult. Threats to species are typically high and immediate. Effective solutions for counteracting these threats, however, require synthesis of high quality evidence, appropriately targeted activities, typically costly implementation, and rapid re-evaluation and adaptation. Conservation management can be ineffective if there is insufficient understanding of the complex ecological, political, socio-cultural, and economic factors that underlie conservation threats. When information about these factors is incomplete, conservation managers may be unaware of the most urgent threats or unable to envision all consequences of potential management strategies. Conservation research aims to address the gap between what is known and what knowledge is needed for effective conservation. Such research, however, generally addresses a subset of the factors that underlie conservation threats, producing a limited, simplistic, and often biased view of complex, real world situations. A combination of approaches is required to provide the complete picture necessary to engage in effective conservation. Orangutan conservation (Pongo spp. offers an example: standard conservation assessments employ survey methods that focus on ecological variables, but do not usually address the socio-cultural factors that underlie threats. Here, we evaluate a complementary survey method based on interviews of nearly 7,000 people in 687 villages in Kalimantan, Indonesia. We address areas of potential methodological weakness in such surveys, including sampling and questionnaire design, respondent biases, statistical analyses, and sensitivity of resultant inferences. We show that interview-based surveys can provide cost-effective and statistically robust methods to better understand poorly known populations of species that are relatively easily identified by local people. Such surveys provide reasonably reliable estimates of relative presence and relative

  17. Learning phacoemulsification. Results of different teaching methods.

    Directory of Open Access Journals (Sweden)

    Hennig Albrecht

    2004-01-01

    Full Text Available We report the learning curves of three eye surgeons converting from sutureless extracapsular cataract extraction to phacoemulsification using different teaching methods. Posterior capsule rupture (PCR as a per-operative complication and visual outcome of the first 100 operations were analysed. The PCR rate was 4% and 15% in supervised and unsupervised surgery respectively. Likewise, an uncorrected visual acuity of > or = 6/18 on the first postoperative day was seen in 62 (62% of patients and in 22 (22% in supervised and unsupervised surgery respectively.

  18. Comparison of Boolean analysis and standard phylogenetic methods using artificially evolved and natural mt-tRNA sequences from great apes.

    Science.gov (United States)

    Ari, Eszter; Ittzés, Péter; Podani, János; Thi, Quynh Chi Le; Jakó, Eena

    2012-04-01

    Boolean analysis (or BOOL-AN; Jakó et al., 2009. BOOL-AN: A method for comparative sequence analysis and phylogenetic reconstruction. Mol. Phylogenet. Evol. 52, 887-97.), a recently developed method for sequence comparison uses the Iterative Canonical Form of Boolean functions. It considers sequence information in a way entirely different from standard phylogenetic methods (i.e. Maximum Parsimony, Maximum-Likelihood, Neighbor-Joining, and Bayesian analysis). The performance and reliability of Boolean analysis were tested and compared with the standard phylogenetic methods, using artificially evolved - simulated - nucleotide sequences and the 22 mitochondrial tRNA genes of the great apes. At the outset, we assumed that the phylogeny of Hominidae is generally well established, and the guide tree of artificial sequence evolution can also be used as a benchmark. These offer a possibility to compare and test the performance of different phylogenetic methods. Trees were reconstructed by each method from 2500 simulated sequences and 22 mitochondrial tRNA sequences. We also introduced a special re-sampling method for Boolean analysis on permuted sequence sites, the P-BOOL-AN procedure. Considering the reliability values (branch support values of consensus trees and Robinson-Foulds distances) we used for simulated sequence trees produced by different phylogenetic methods, BOOL-AN appeared as the most reliable method. Although the mitochondrial tRNA sequences of great apes are relatively short (59-75 bases long) and the ratio of their constant characters is about 75%, BOOL-AN, P-BOOL-AN and the Bayesian approach produced the same tree-topology as the established phylogeny, while the outcomes of Maximum Parsimony, Maximum-Likelihood and Neighbor-Joining methods were equivocal. We conclude that Boolean analysis is a promising alternative to existing methods of sequence comparison for phylogenetic reconstruction and congruence analysis. Copyright © 2012 Elsevier Inc. All

  19. Different Methods for Conditioning Chloride Salt Wastes

    International Nuclear Information System (INIS)

    De Angelis, G.; Fedeli, C.; Capone, M.; Marzo, G.A.; Mariani, M.; Da Ros, M.; Giacobbo, F.; Macerata, E.; Giola, M.

    2015-01-01

    Three different methods have been used to condition chloride salt wastes coming from pyro-processes. Two of them allow to synthesise sodalite, a naturally occurring mineral containing chlorine: the former, starting from Zeolite 4A, which transforms the zeolite into sodalite; the latter, which starts from kaolinite, giving sodalite as well. In addition, a new matrix, termed SAP (SiO 2 -Al 2 O 3 -P 2 O 5 ), has been synthesised. It is able to form different mineral phases which occlude fission metals. The products from the different processes have been fully characterised. In particular the chemical durability of the final waste forms has been determined using the standard product consistency test. According to the results obtained, SAP seems to be a promising matrix for the incorporation of chloride salt wastes from pyro-processes. Financial support from the Nuclear Fission Safety Programme of the European Union (projects ACSEPT, contract FP7-CP-2007- 211 267, and SACSESS, Collaborative Project 323282), as well as from Italian Ministry for Economic Development (Accordo di Programma: Piano Annuale di Realizzazione 2008-2009) is gratefully acknowledged. (authors)

  20. A Review on Different Virtual Learning Methods in Pharmacy Education

    Directory of Open Access Journals (Sweden)

    Amin Noori

    2015-10-01

    Full Text Available Virtual learning is a type of electronic learning system based on the web. It models traditional in- person learning by providing virtual access to classes, tests, homework, feedbacks and etc. Students and teachers can interact through chat rooms or other virtual environments. Web 2.0 services are usually used for this method. Internet audio-visual tools, multimedia systems, a disco CD-ROMs, videotapes, animation, video conferencing, and interactive phones can all be used to deliver data to the students. E-learning can occur in or out of the classroom. It is time saving with lower costs compared to traditional methods. It can be self-paced, it is suitable for distance learning and it is flexible. It is a great learning style for continuing education and students can independently solve their problems but it has its disadvantages too. Thereby, blended learning (combination of conventional and virtual education is being used worldwide and has improved knowledge, skills and confidence of pharmacy students.The aim of this study is to review, discuss and introduce different methods of virtual learning for pharmacy students.Google scholar, Pubmed and Scupus databases were searched for topics related to virtual, electronic and blended learning and different styles like computer simulators, virtual practice environment technology, virtual mentor, virtual patient, 3D simulators, etc. are discussed in this article.Our review on different studies on these areas shows that the students are highly satisfied withvirtual and blended types of learning.

  1. Educating Instructional Designers: Different Methods for Different Outcomes.

    Science.gov (United States)

    Rowland, Gordon; And Others

    1994-01-01

    Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

  2. Fusing MODIS with Landsat 8 data to downscale weekly normalized difference vegetation index estimates for central Great Basin rangelands, USA

    Science.gov (United States)

    Boyte, Stephen; Wylie, Bruce K.; Rigge, Matthew B.; Dahal, Devendra

    2018-01-01

    Data fused from distinct but complementary satellite sensors mitigate tradeoffs that researchers make when selecting between spatial and temporal resolutions of remotely sensed data. We integrated data from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor aboard the Terra satellite and the Operational Land Imager sensor aboard the Landsat 8 satellite into four regression-tree models and applied those data to a mapping application. This application produced downscaled maps that utilize the 30-m spatial resolution of Landsat in conjunction with daily acquisitions of MODIS normalized difference vegetation index (NDVI) that are composited and temporally smoothed. We produced four weekly, atmospherically corrected, and nearly cloud-free, downscaled 30-m synthetic MODIS NDVI predictions (maps) built from these models. Model results were strong with R2 values ranging from 0.74 to 0.85. The correlation coefficients (r ≥ 0.89) were strong for all predictions when compared to corresponding original MODIS NDVI data. Downscaled products incorporated into independently developed sagebrush ecosystem models yielded mixed results. The visual quality of the downscaled 30-m synthetic MODIS NDVI predictions were remarkable when compared to the original 250-m MODIS NDVI. These 30-m maps improve knowledge of dynamic rangeland seasonal processes in the central Great Basin, United States, and provide land managers improved resource maps.

  3. A sensor-based energy balance method for the distributed estimation of evaporation over the North American Great Lakes

    Science.gov (United States)

    Fries, K. J.; Kerkez, B.; Gronewold, A.; Lenters, J. D.

    2014-12-01

    We introduce a novel energy balance method to estimate evaporation across large lakes using real-time data from moored buoys and mobile, satellite-tracked drifters. Our work is motivated by the need to improve our understanding of the water balance of the Laurentian Great Lakes basin, a complex hydrologic system that comprises 90% of the United States' and 20% of the world's fresh surface water. Recently, the lakes experienced record-setting water level drops despite above-average precipitation, and given that lake surface area comprises nearly one third of the entire basin, evaporation is suspected to be the primary driver behind the decrease in water levels. There has historically been a need to measure evaporation over the Great Lakes, and recent hydrological phenomena (including not only record low levels, but also extreme changes in ice cover and surface water temperatures) underscore the urgency of addressing that need. Our method tracks the energy fluxes of the lake system - namely net radiation, heat storage and advection, and Bowen ratio. By measuring each of these energy budget terms and combining the results with mass-transfer based estimates, we can calculate real-time evaporation rates on sub-hourly timescales. To mitigate the cost prohibitive nature of large-scale, distributed energy flux measurements, we present a novel approach in which we leverage existing investments in seasonal buoys (which, while providing intensive, high quality data, are costly and sparsely distributed across the surface of the Great Lakes) and then integrate data from less costly satellite-tracked drifter data. The result is an unprecedented, hierarchical sensor and modeling architecture that can be used to derive estimates of evaporation in real-time through cloud-based computing. We discuss recent deployments of sensor-equipped buoys and drifters, which are beginning to provide us with some of the first in situ measurements of overlake evaporation from Earth's largest lake

  4. Spatial differences in hydrologic characteristics and water chemistry of a temperate coastal plain peatland: The Great Dismal Swamp, USA

    Science.gov (United States)

    Speiran, Gary K.; Wurster, Frederick C.

    2016-01-01

    Spatial differences in hydrologic processes and geochemistry across forested peatlands control the response of the wetland-community species and resiliency to natural and anthropogenic disturbances. Knowing these controls is essential to effectively managing peatlands as resilient wetland habitats. The Great Dismal Swamp is a 45,325 hectare peatland in the Atlantic Coastal Plain of Virginia and North Carolina, USA, managed by the U.S. Fish and Wildlife Service. The existing forest-species distribution is a product of timber harvesting, hydrologic alteration by canal and road construction, and wildfires. Since 2009, studies of hydrologic and geochemical controls have expanded knowledge of groundwater flow paths, water chemistry, response to precipitation events, and characteristics of the peat. Dominant hydrologic and geochemical controls include (1) the gradual slope in land surface, (2) vertical differences in the hydraulic characteristics of the peat, (3) the proximity of lateral groundwater and small stream inflows from uplands, (4) the presence of an extensive canal and road network, and (5) small, adjustable-height dams on the canals. Although upland sources provide some surface water and lateral groundwater inflow to western parts of the swamp, direct groundwater recharge by precipitation is the major source of water throughout the swamp and the only source in many areas. Additionally, the proximity and type of upland water sources affect water levels and nutrient concentrations in canal water and groundwater. Where streams are a dominant upland source, variations in groundwater levels and nutrient concentrations are greater than where recharge by precipitation is the primary water source. Where upland groundwater is a dominant source, water levels are more stable. Because the species distribution of forest communities in the Swamp is strongly influenced by these controls, swamp managers are beginning to incorporate this knowledge into forest, water, and fire

  5. Two-column sequential injection chromatography for fast isocratic separation of two analytes of greatly differing chemical properties.

    Science.gov (United States)

    Šatínský, Dalibor; Chocholouš, Petr; Válová, Olga; Hanusová, Lucia; Solich, Petr

    2013-09-30

    This paper deals with a novel approach to separate two analytes with different chemical properties and different lipophilicity. The newly described methodology is based on the two column system that was used for isocratic separation of two analytes with very different lipophilicity-dexamethasone and cinchocaine. Simultaneous separation of model compounds cinchocaine and dexamethasone was carried under the following conditions in two-column sequential injection chromatography system (2-C SIC). A 25×4.6 mm C-18 monolithic column was used in the first dimension for retention and separation of dexamethasone with mobile phase acetonitrile:water 30:70 (v/v), flow rate 0.9 mL min(-1) and consumption of 1.7 mL. A 10×4.6 mm C-18 monolithic column with 5×4.6 mm C-18 precolumn was used in the second dimension for retention and separation of cinchocaine using mobile phase acetonitrile:water 60:40 (v/v), flow rate 0.9 mL min(-1) and consumption 1.5 mL. Whole analysis time including both mobile phase's aspirations and both column separations was performed in less than 4 min. The method was fully validated and used for determination of cinchocaine and dexamethasone in pharmaceutical otic drops. The developed 2-C SIC method was compared with HPLC method under the isocratic conditions of separation on monolithic column (25×4.6 mm C-18). Spectrophotometric detection of both compounds was performed at wavelength 240 nm. System repeatability and method precision were found in the range (0.39-3.12%) for both compounds. Linearity of determination was evaluated in the range 50-500 μg mL(-1) and coefficients of determination were found to be r(2)=0.99912 for dexamethasone and r(2)=0.99969 for cinchocaine. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. A novel method for single sample multi-axial nanoindentation of hydrated heterogeneous tissues based on testing great white shark jaws.

    Science.gov (United States)

    Ferrara, Toni L; Boughton, Philip; Slavich, Eve; Wroe, Stephen

    2013-01-01

    Nanomechanical testing methods that are suitable for a range of hydrated tissues are crucial for understanding biological systems. Nanoindentation of tissues can provide valuable insights into biology, tissue engineering and biomimetic design. However, testing hydrated biological samples still remains a significant challenge. Shark jaw cartilage is an ideal substrate for developing a method to test hydrated tissues because it is a unique heterogeneous composite of both mineralized (hard) and non-mineralized (soft) layers and possesses a jaw geometry that is challenging to test mechanically. The aim of this study is to develop a novel method for obtaining multidirectional nanomechanical properties for both layers of jaw cartilage from a single sample, taken from the great white shark (Carcharodon carcharias). A method for obtaining multidirectional data from a single sample is necessary for examining tissue mechanics in this shark because it is a protected species and hence samples may be difficult to obtain. Results show that this method maintains hydration of samples that would otherwise rapidly dehydrate. Our study is the first analysis of nanomechanical properties of great white shark jaw cartilage. Variation in nanomechanical properties were detected in different orthogonal directions for both layers of jaw cartilage in this species. The data further suggest that the mineralized layer of shark jaw cartilage is less stiff than previously posited. Our method allows multidirectional nanomechanical properties to be obtained from a single, small, hydrated heterogeneous sample. Our technique is therefore suitable for use when specimens are rare, valuable or limited in quantity, such as samples obtained from endangered species or pathological tissues. We also outline a method for tip-to-optic calibration that facilitates nanoindentation of soft biological tissues. Our technique may help address the critical need for a nanomechanical testing method that is applicable

  7. A novel method for single sample multi-axial nanoindentation of hydrated heterogeneous tissues based on testing great white shark jaws.

    Directory of Open Access Journals (Sweden)

    Toni L Ferrara

    Full Text Available Nanomechanical testing methods that are suitable for a range of hydrated tissues are crucial for understanding biological systems. Nanoindentation of tissues can provide valuable insights into biology, tissue engineering and biomimetic design. However, testing hydrated biological samples still remains a significant challenge. Shark jaw cartilage is an ideal substrate for developing a method to test hydrated tissues because it is a unique heterogeneous composite of both mineralized (hard and non-mineralized (soft layers and possesses a jaw geometry that is challenging to test mechanically. The aim of this study is to develop a novel method for obtaining multidirectional nanomechanical properties for both layers of jaw cartilage from a single sample, taken from the great white shark (Carcharodon carcharias. A method for obtaining multidirectional data from a single sample is necessary for examining tissue mechanics in this shark because it is a protected species and hence samples may be difficult to obtain. Results show that this method maintains hydration of samples that would otherwise rapidly dehydrate. Our study is the first analysis of nanomechanical properties of great white shark jaw cartilage. Variation in nanomechanical properties were detected in different orthogonal directions for both layers of jaw cartilage in this species. The data further suggest that the mineralized layer of shark jaw cartilage is less stiff than previously posited. Our method allows multidirectional nanomechanical properties to be obtained from a single, small, hydrated heterogeneous sample. Our technique is therefore suitable for use when specimens are rare, valuable or limited in quantity, such as samples obtained from endangered species or pathological tissues. We also outline a method for tip-to-optic calibration that facilitates nanoindentation of soft biological tissues. Our technique may help address the critical need for a nanomechanical testing method

  8. On the equivalence of different regularization methods

    International Nuclear Information System (INIS)

    Brzezowski, S.

    1985-01-01

    The R-circunflex-operation preceded by the regularization procedure is discussed. Some arguments are given, according to which the results may depend on the method of regularization, introduced in order to avoid divergences in perturbation calculations. 10 refs. (author)

  9. Assessing Social Isolation: Pilot Testing Different Methods.

    Science.gov (United States)

    Taylor, Harry Owen; Herbers, Stephanie; Talisman, Samuel; Morrow-Howell, Nancy

    2016-04-01

    Social isolation is a significant public health problem among many older adults; however, most of the empirical knowledge about isolation derives from community-based samples. There has been less attention given to isolation in senior housing communities. The objectives of this pilot study were to test two methods to identify socially isolated residents in low-income senior housing and compare findings about the extent of isolation from these two methods. The first method, self-report by residents, included 47 out of 135 residents who completed in-person interviews. To determine self-report isolation, residents completed the Lubben Social Network Scale 6 (LSNS-6). The second method involved a staff member who reported the extent of isolation on all 135 residents via an online survey. Results indicated that 26% of residents who were interviewed were deemed socially isolated by the LSNS-6. Staff members rated 12% of residents as having some or a lot of isolation. In comparing the two methods, staff members rated 2% of interviewed residents as having a lot of isolation. The combination of self-report and staff report could be more informative than just self-report alone, particularly when participation rates are low. However, researchers should be aware of the potential discrepancy between these two methods.

  10. Differences in the Effects of the Great Recession on Health Outcomes among Minority Working-Age Adults.

    Science.gov (United States)

    Towne, Samuel D; Probst, Janice C; Hardin, James W; Bell, Bethany A; Glover, Saundra

    2015-03-01

    We examined the effects of the Great Recession (December 2007-June 2009) among vulnerable adults who may be at high risk of poor health and low access to health care. Our primary outcomes of interest were self-reported health status (fair/poor versus good/very good/excellent), and foregoing needed health care due to cost in the past 12 months. Racial and ethnic minorities, except Asians, experienced higher rates of poor/fair health and higher rates of forgone medical care than did White adults. Hispanic and AIAN adults experienced differential effects of the Great Recession, as compared to White adults. Understanding how vulnerable populations react in times of economic flux will enable policy makers to identify strategies/policies to lessen the burden experienced by vulnerable adults.

  11. Gender and Race/Ethnicity Differences in Mental Health Care Use before and during the Great Recession.

    Science.gov (United States)

    Chen, Jie; Dagher, Rada

    2016-04-01

    This study examines the changes in health care utilization for mental health disorders among patients who were diagnosed with depressive and/or anxiety disorders during the Great Recession 2007-2009 in the USA. Negative binomial regressions are used to estimate the association of the economic recession and mental health care use for females and males separately. Results show that prescription drug utilization (e.g., antidepressants, psychotropic medications) increased significantly during the economic recession 2007-2009 for both females and males. Physician visits for mental health disorders decreased during the same period. Results show that racial disparities in mental health care might have increased, while ethnic disparities persisted during the Great Recession. Future research should separately examine mental health care utilization by gender and race/ethnicity.

  12. A comparison of different methods for predicting coal devolatilisation kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Arenillas, A.; Rubiera, F.; Pevida, C.; Pis, J.J. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain)

    2001-04-01

    Knowledge of the coal devolatilisation rate is of great importance because it exerts a marked effect on the overall combustion behaviour. Different approaches can be used to obtain the kinetics of the complex devolatilisation process. The simplest are empirical and employ global kinetics, where the Arrhenius expression is used to correlate rates of mass loss with temperature. In this study a high volatile bituminous coal was devolatilised at four different heating rates in a thermogravimetric analyser (TG) linked to a mass spectrometer (MS). As a first approach, the Arrhenius kinetic parameters (k and A) were calculated from the experimental results, assuming a single step process. Another approach is the distributed-activation energy model, which is more complex due to the assumption that devolatilisation occurs through several first-order reactions, which occur simultaneously. Recent advances in the understanding of coal structure have led to more fundamental approaches for modelling devolatilisation behaviour, such as network models. These are based on a physico-chemical description of coal structure. In the present study the FG-DVC (Functional Group-Depolymerisation, Vaporisation and Crosslinking) computer code was used as the network model and the FG-DVC predicted evolution of volatile compounds was compared with the experimental results. In addition, the predicted rate of mass loss from the FG-DVC model was used to obtain a third devolatilisation kinetic approach. The three methods were compared and discussed, with the experimental results as a reference.

  13. Different methods for volatile sampling in mammals.

    Directory of Open Access Journals (Sweden)

    Marlen Kücklich

    Full Text Available Previous studies showed that olfactory cues are important for mammalian communication. However, many specific compounds that convey information between conspecifics are still unknown. To understand mechanisms and functions of olfactory cues, olfactory signals such as volatile compounds emitted from individuals need to be assessed. Sampling of animals with and without scent glands was typically conducted using cotton swabs rubbed over the skin or fur and analysed by gas chromatography-mass spectrometry (GC-MS. However, this method has various drawbacks, including a high level of contaminations. Thus, we adapted two methods of volatile sampling from other research fields and compared them to sampling with cotton swabs. To do so we assessed the body odor of common marmosets (Callithrix jacchus using cotton swabs, thermal desorption (TD tubes and, alternatively, a mobile GC-MS device containing a thermal desorption trap. Overall, TD tubes comprised most compounds (N = 113, with half of those compounds being volatile (N = 52. The mobile GC-MS captured the fewest compounds (N = 35, of which all were volatile. Cotton swabs contained an intermediate number of compounds (N = 55, but very few volatiles (N = 10. Almost all compounds found with the mobile GC-MS were also captured with TD tubes (94%. Hence, we recommend TD tubes for state of the art sampling of body odor of mammals or other vertebrates, particularly for field studies, as they can be easily transported, stored and analysed with high performance instruments in the lab. Nevertheless, cotton swabs capture compounds which still may contribute to the body odor, e.g. after bacterial fermentation, while profiles from mobile GC-MS include only the most abundant volatiles of the body odor.

  14. Implicit and fully implicit exponential finite difference methods

    Indian Academy of Sciences (India)

    Burgers' equation; exponential finite difference method; implicit exponential finite difference method; ... This paper describes two new techniques which give improved exponential finite difference solutions of Burgers' equation. ... Current Issue

  15. Elucidating causes of Diporeia decline in the Great Lakes via metabolomics: physiological responses after exposure to different stressors.

    Science.gov (United States)

    Maity, Suman; Jannasch, Amber; Adamec, Jiri; Watkins, James M; Nalepa, Thomas; Höök, Tomas O; Sepúlveda, Maria S

    2013-01-01

    The benthic macroinvertebrate Diporeia spp. have been extirpated from many areas of the Laurentian Great Lakes, but the mechanisms underlying such declines are not fully understood. Diporeia declines coinciding with the invasion of exotic dreissenid mussels (zebra and quagga) have led to the hypothesis that Diporeia declines are a result of decreased food availability from increasing competition with dreissenids for diatoms. There is additional evidence that Diporeia are negatively affected when in close proximity to dreissenids, probably because of exposure to toxins present in the mussels' pseudofeces. Diporeia are also known to be sensitive to anthropogenic contaminants (such as polychlorinated biphenyls [PCBs]) present in Great Lakes sediments. To better understand the physiological responses of Diporeia to diverse stressors, we conducted three 28-d experiments evaluating changes in the metabolomes of Diporeia (1) fed diatoms (Cyclotella meneghiniana) versus starved, (2) exposed (from Lake Michigan and Cayuga Lake) to quagga mussels (Dreissena bugensis), and (3) exposed to sediments contaminated with PCBs. The metabolomes of samples were examined using both two-dimensional gas and liquid chromatography coupled with mass spectrometry. Each stressor elicited a unique metabolome response characterized by enhanced citric acid cycle, fatty acid biosynthesis, and protein metabolism in diatom-fed Diporeia; impaired glycolysis, protein catabolism, and folate metabolism in Diporeia from Lake Michigan irrespective of quagga mussel exposure, suggesting lake-specific adaptation mechanisms; and altered cysteine and phospholipid metabolism during PCB exposure. Subsequent comparisons of these stressor-specific metabolic responses with metabolomes of a feral Diporeia population would help identify stressors affecting Diporeia populations throughout the Great Lakes.

  16. Great Apes

    Science.gov (United States)

    Sleeman, Jonathan M.; Cerveny, Shannon

    2014-01-01

    Anesthesia of great apes is often necessary to conduct diagnostic analysis, provide therapeutics, facilitate surgical procedures, and enable transport and translocation for conservation purposes. Due to the stress of remote delivery injection of anesthetic agents, recent studies have focused on oral delivery and/or transmucosal absorption of preanesthetic and anesthetic agents. Maintenance of the airway and provision of oxygen is an important aspect of anesthesia in great ape species. The provision of analgesia is an important aspect of the anesthesia protocol for any procedure involving painful stimuli. Opioids and nonsteroidal anti-inflammatory drugs (NSAIDs) are often administered alone, or in combination to provide multi-modal analgesia. There is increasing conservation management of in situ great ape populations, which has resulted in the development of field anesthesia techniques for free-living great apes for the purposes of translocation, reintroduction into the wild, and clinical interventions.

  17. Chemicals of emerging concern in water and bottom sediment in Great Lakes areas of concern, 2010 to 2011-Collection methods, analyses methods, quality assurance, and data

    Science.gov (United States)

    Lee, Kathy E.; Langer, Susan K.; Menheer, Michael A.; Foreman, William T.; Furlong, Edward T.; Smith, Steven G.

    2012-01-01

    The U.S. Geological Survey (USGS) cooperated with the U.S. Environmental Protection Agency and the U.S. Fish and Wildlife Service on a study to identify the occurrence of chemicals of emerging concern (CECs) in water and bottom-sediment samples collected during 2010–11 at sites in seven areas of concern (AOCs) throughout the Great Lakes. Study sites include tributaries to the Great Lakes in AOCs located near Duluth, Minn.; Green Bay, Wis.; Roches­ter, N.Y.; Detroit, Mich.; Toledo, Ohio; Milwaukee, Wis.; and Ashtabula, Ohio. This report documents the collection meth­ods, analyses methods, quality-assurance data and analyses, and provides the data for this study. Water and bottom-sediment samples were analyzed at the USGS National Water Quality Laboratory in Denver, Colo., for a broad suite of CECs. During this study, 135 environmental and 23 field dupli­cate samples of surface water and wastewater effluent, 10 field blank water samples, and 11 field spike water samples were collected and analyzed. Sixty-one of the 69 wastewater indicator chemicals (laboratory method 4433) analyzed were detected at concentrations ranging from 0.002 to 11.2 micrograms per liter. Twenty-eight of the 48 pharmaceuticals (research method 8244) analyzed were detected at concentrations ranging from 0.0029 to 22.0 micro­grams per liter. Ten of the 20 steroid hormones and sterols analyzed (research method 4434) were detected at concentrations ranging from 0.16 to 10,000 nanograms per liter. During this study, 75 environmental, 13 field duplicate samples, and 9 field spike samples of bottom sediment were collected and analyzed for a wide variety of CECs. Forty-seven of the 57 wastewater indicator chemicals (laboratory method 5433) analyzed were detected at concentrations ranging from 0.921 to 25,800 nanograms per gram. Seventeen of the 20 steroid hormones and sterols (research method 6434) analyzed were detected at concentrations ranging from 0.006 to 8,921 nanograms per gram. Twelve of

  18. Different protein-protein interface patterns predicted by different machine learning methods.

    Science.gov (United States)

    Wang, Wei; Yang, Yongxiao; Yin, Jianxin; Gong, Xinqi

    2017-11-22

    Different types of protein-protein interactions make different protein-protein interface patterns. Different machine learning methods are suitable to deal with different types of data. Then, is it the same situation that different interface patterns are preferred for prediction by different machine learning methods? Here, four different machine learning methods were employed to predict protein-protein interface residue pairs on different interface patterns. The performances of the methods for different types of proteins are different, which suggest that different machine learning methods tend to predict different protein-protein interface patterns. We made use of ANOVA and variable selection to prove our result. Our proposed methods taking advantages of different single methods also got a good prediction result compared to single methods. In addition to the prediction of protein-protein interactions, this idea can be extended to other research areas such as protein structure prediction and design.

  19. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    OpenAIRE

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective: To examine sociodemographic and behavioural differences between men whohave sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey.\\ud Methods: We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men inthe same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European...

  20. Metrology of two-phase flow: different methods

    International Nuclear Information System (INIS)

    Delhaye, J.M.; Galaup, J.P.; Reocreux, M.; Ricque, R.

    Nine papers are presented concerning different methods of measuring two-phase flow. Some of the methods and equipment discussed include: radiation absorption, electromagnetic flowmeter, anemometry, resistance probes, phase indicating microthermocouples, optical probes, sampling methods, and pitot tubes

  1. Tunnels: different construction methods and its use for pipelines installation

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Tales; Soares, Ana Cecilia; Assis, Slow de; Bolsonaro, Ralfo; Sanandres, Simon [Petroleo do Brasil S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    In a continental dimensions country like Brazil, the pipeline modal faces the challenge of opening ROW's in the most different kind of soils with the most different geomorphology. To safely fulfill the pipeline construction demand, the ROW opening uses all techniques in earthworks and route definition and, where is necessary, no digging techniques like horizontal directional drilling, micro tunneling and also full size tunnels design for pipelines installation in high topography terrains to avoid geotechnical risks. PETROBRAS has already used the tunnel technique to cross higher terrains with great construction difficult, and mainly to make it pipeline maintenance and operation easier. For the GASBOL Project, in Aparados da Serra region and in GASYRG, in Bolivia, two tunnels were opened with approximately 700 meters and 2,000 meters each one. The GASBOL Project had the particularity of being a gallery with only one excavation face, finishing under the hill and from this point was drilled a vertical shaft was drilled until the top to install the pipeline section, while in GASYRG Project the tunnel had two excavation faces. Currently, two projects are under development with tunnels, one of then is the Caraguatatuba-Taubate gas pipeline (GASTAU), with a 5 km tunnel, with the same concepts of the GASBOL tunnel, with a gallery to be opened with the use of a TBM (Tunneling Boring Machine), and a shaft to the surface, and the gas pipeline Cabiunas-Reduc III (GASDUC III) project is under construction with a 3.7 km tunnel, like the GASYRG tunnel with two faces. This paper presents the main excavation tunneling methods, conventional and mechanized, presenting the most relevant characteristics from both and, in particular, the use of tunnels for pipelines installation. (author)

  2. Child Poverty During the Years of the Great Recession: An Analysis of Racial Differences Among Immigrants and US Natives.

    Science.gov (United States)

    Thomas, Kevin J A; Tucker, Catherine

    2015-12-01

    Although the consequences of the Great Recession are extensively discussed in previous research, three critical issue need to be addressed in order to develop a full portrait of the economic experiences of children during this period. First, given the changing immigrant composition of the US child population, new studies are needed for examining the implications of immigrant status for exposure to child poverty during the recession. Second, it is important to understand how traditional patterns of racial inequality among were transformed during the years of the recession. Finally, it is not clear whether recession-related changes in socioeconomic inequalities continued to have implications for child well-being in the post-recession period. Results from this analysis indicate that the adverse effects of the recession were most intense in states with significant changes in their populations of Black and Latino immigrant children. The results further show that declines in parental work opportunities were more consequential for poverty among Whites and Asians. The analysis also finds differential implications of family contexts for child poverty among Black immigrant and natives during the recession. Finally, the results indicate that increases in racial child poverty disparities during the recession did not disappear in the years following the downturn.

  3. A new isolation with migration model along complete genomes infers very different divergence processes among closely related great ape species.

    Directory of Open Access Journals (Sweden)

    Thomas Mailund

    Full Text Available We present a hidden Markov model (HMM for inferring gradual isolation between two populations during speciation, modelled as a time interval with restricted gene flow. The HMM describes the history of adjacent nucleotides in two genomic sequences, such that the nucleotides can be separated by recombination, can migrate between populations, or can coalesce at variable time points, all dependent on the parameters of the model, which are the effective population sizes, splitting times, recombination rate, and migration rate. We show by extensive simulations that the HMM can accurately infer all parameters except the recombination rate, which is biased downwards. Inference is robust to variation in the mutation rate and the recombination rate over the sequence and also robust to unknown phase of genomes unless they are very closely related. We provide a test for whether divergence is gradual or instantaneous, and we apply the model to three key divergence processes in great apes: (a the bonobo and common chimpanzee, (b the eastern and western gorilla, and (c the Sumatran and Bornean orang-utan. We find that the bonobo and chimpanzee appear to have undergone a clear split, whereas the divergence processes of the gorilla and orang-utan species occurred over several hundred thousands years with gene flow stopping quite recently. We also apply the model to the Homo/Pan speciation event and find that the most likely scenario involves an extended period of gene flow during speciation.

  4. Derivation of RCM-driven potential evapotranspiration for hydrological climate change impact analysis in Great Britain: a comparison of methods and associated uncertainty in future projections

    Directory of Open Access Journals (Sweden)

    C. Prudhomme

    2013-04-01

    Full Text Available Potential evapotranspiration (PET is the water that would be lost by plants through evaporation and transpiration if water was not limited in the soil, and it is commonly used in conceptual hydrological modelling in the calculation of runoff production and hence river discharge. Future changes of PET are likely to be as important as changes in precipitation patterns in determining changes in river flows. However PET is not calculated routinely by climate models so it must be derived independently when the impact of climate change on river flow is to be assessed. This paper compares PET estimates from 12 equations of different complexity, driven by the Hadley Centre's HadRM3-Q0 model outputs representative of 1961–1990, with MORECS PET, a product used as reference PET in Great Britain. The results show that the FAO56 version of the Penman–Monteith equations reproduces best the spatial and seasonal variability of MORECS PET across GB when driven by HadRM3-Q0 estimates of relative humidity, total cloud, wind speed and linearly bias-corrected mean surface temperature. This suggests that potential biases in HadRM3-Q0 climate do not result in significant biases when the physically based FAO56 equations are used. Percentage changes in PET between the 1961–1990 and 2041–2070 time slices were also calculated for each of the 12 PET equations from HadRM3-Q0. Results show a large variation in the magnitude (and sometimes direction of changes estimated from different PET equations, with Turc, Jensen–Haise and calibrated Blaney–Criddle methods systematically projecting the largest increases across GB for all months and Priestley–Taylor, Makkink, and Thornthwaite showing the smallest changes. We recommend the use of the FAO56 equation as, when driven by HadRM3-Q0 climate data, this best reproduces the reference MORECS PET across Great Britain for the reference period of 1961–1990. Further, the future changes of PET estimated by FAO56 are within

  5. Great Expectations

    NARCIS (Netherlands)

    Dickens, Charles

    2005-01-01

    One of Dickens's most renowned and enjoyable novels, Great Expectations tells the story of Pip, an orphan boy who wishes to transcend his humble origins and finds himself unexpectedly given the opportunity to live a life of wealth and respectability. Over the course of the tale, in which Pip

  6. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. Methods We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. Results MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%–95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. Conclusions National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. PMID:26965869

  7. Impact of the Great East Japan Earthquake on feeding methods and newborn growth at 1 month postpartum: results from the Fukushima Health Management Survey

    International Nuclear Information System (INIS)

    Kyozuka, Hyo; Yasuda, Shun; Kawamura, Makoto; Nomura, Yasuhisa; Fujimori, Keiya; Goto, Aya; Yasumura, Seiji; Abe, Masafumi

    2016-01-01

    This study examined the effects of three disasters (the Great East Japan Earthquake of March 11, 2011, followed by a tsunami and the Fukushima Daiichi Nuclear Power Plant accident) on feeding methods and growth in infants born after the disasters. Using results from the Fukushima Health Management Survey, Soso District (the affected area where the damaged nuclear power plant is located) and Aizu District (a less-affected area located farthest from the plant) were compared. In this study, newborn and maternal background characteristics were examined, as well as feeding methods, and other factors for newborn growth at the first postpartum examination for 1706 newborns born after the disaster in the affected (n = 836) and less-affected (n = 870) areas. Postpartum examinations took place 1 month after birth. Feeding method trends were examined, and multivariate regression analyses were used to investigate effects on newborn mass gain. There were no significant differences in background characteristics among newborns in these areas. When birth dates were divided into four periods to assess trends, no significant change in the exclusive breastfeeding rate was found, while the exclusive formula-feeding rate was significantly different across time periods in the affected area (p = 0.02). Multivariate analyses revealed no significant independent associations of maternal depression and change in medical facilities (possible disaster effects) with other newborn growth factors in either area. No area differences in newborn growth at the first postpartum examination or in exclusive breastfeeding rates were found during any period. Exclusive formula-feeding rates varied across time periods in the affected, but not in the less-affected area. It is concluded that effective guidance to promote breast-feeding and prevent exclusive use of formula is important for women in post-disaster circumstances. (orig.)

  8. Impact of the Great East Japan Earthquake on feeding methods and newborn growth at 1 month postpartum: results from the Fukushima Health Management Survey

    Energy Technology Data Exchange (ETDEWEB)

    Kyozuka, Hyo; Yasuda, Shun; Kawamura, Makoto; Nomura, Yasuhisa; Fujimori, Keiya [Fukushima Medical University, Department of Obstetrics and Gynecology, School of Medicine, Fukushima (Japan); Goto, Aya; Yasumura, Seiji [Radiation Medical Science Center for the Fukushima Health Management Survey, Fukushima (Japan); Fukushima Medical University, Department of Public Health, School of Medicine, Fukushima (Japan); Abe, Masafumi [Radiation Medical Science Center for the Fukushima Health Management Survey, Fukushima (Japan)

    2016-05-15

    This study examined the effects of three disasters (the Great East Japan Earthquake of March 11, 2011, followed by a tsunami and the Fukushima Daiichi Nuclear Power Plant accident) on feeding methods and growth in infants born after the disasters. Using results from the Fukushima Health Management Survey, Soso District (the affected area where the damaged nuclear power plant is located) and Aizu District (a less-affected area located farthest from the plant) were compared. In this study, newborn and maternal background characteristics were examined, as well as feeding methods, and other factors for newborn growth at the first postpartum examination for 1706 newborns born after the disaster in the affected (n = 836) and less-affected (n = 870) areas. Postpartum examinations took place 1 month after birth. Feeding method trends were examined, and multivariate regression analyses were used to investigate effects on newborn mass gain. There were no significant differences in background characteristics among newborns in these areas. When birth dates were divided into four periods to assess trends, no significant change in the exclusive breastfeeding rate was found, while the exclusive formula-feeding rate was significantly different across time periods in the affected area (p = 0.02). Multivariate analyses revealed no significant independent associations of maternal depression and change in medical facilities (possible disaster effects) with other newborn growth factors in either area. No area differences in newborn growth at the first postpartum examination or in exclusive breastfeeding rates were found during any period. Exclusive formula-feeding rates varied across time periods in the affected, but not in the less-affected area. It is concluded that effective guidance to promote breast-feeding and prevent exclusive use of formula is important for women in post-disaster circumstances. (orig.)

  9. Great Ellipse Route Planning Based on Space Vector

    Directory of Open Access Journals (Sweden)

    LIU Wenchao

    2015-07-01

    Full Text Available Aiming at the problem of navigation error caused by unified earth model in great circle route planning using sphere model and modern navigation equipment using ellipsoid mode, a method of great ellipse route planning based on space vector is studied. By using space vector algebra method, the vertex of great ellipse is solved directly, and description of great ellipse based on major-axis vector and minor-axis vector is presented. Then calculation formulas of great ellipse azimuth and distance are deduced using two basic vectors. Finally, algorithms of great ellipse route planning are studied, especially equal distance route planning algorithm based on Newton-Raphson(N-R method. Comparative examples show that the difference of route planning between great circle and great ellipse is significant, using algorithms of great ellipse route planning can eliminate the navigation error caused by the great circle route planning, and effectively improve the accuracy of navigation calculation.

  10. Differential host growth regulation by the solitary endoparasitoid, Meteorus pulchricornis in two hosts of greatly differing mass.

    Science.gov (United States)

    Harvey, Jeffrey A; Sano, Takeshi; Tanaka, Toshiharu

    2010-09-01

    Solitary koinobiont endoparasitoids generally reduce the growth of their hosts by a significant amount compared with healthy larvae. Here, we compared the development and host usage strategies of the solitary koinobiont endoparasitoid, Meteorus pulchricornis, when developing in larvae of a large host species (Mythimna separata) and a much smaller host species (Plutella xylostella). Caterpillars of M. separata were parasitized as L2 and P. xylostella as L3, when they weighed approximately 2mg. The growth of parasitized M. separata larvae was reduced by almost 95% compared with controls, whereas parasitized P. xylostella larvae grew some 30% larger than controls. Still, adult wasps emerging from M. separata larvae were almost twice as large as wasps emerging from P. xylostella larvae, had larger egg loads after 5 days and produced more progeny. Survival to eclosion was also higher on M. separata than on P. xylostella, although parasitoids developed significantly faster when developing on P. xylostella. Our results provide evidence that koinobionts are able to differentially regulate the growth of different host species. However, there are clearly also limitations in the ability of parasitoids to regulate phenotypic host traits when size differences between different host species are as extreme as demonstrated here.

  11. Mixed Methods and Action Research: similar or different?

    OpenAIRE

    Wiśniewska, Danuta

    2011-01-01

    This article attempts to analyse and compare ELT studies grounded solely in mixed methods and ELT action research studies based on a mixed methods approach in order to identify to what degree action research studies combining different methods in a single study comply with the principles of rigorous mixed methods study.

  12. Benchmarking HRA methods against different NPP simulator data

    International Nuclear Information System (INIS)

    Petkov, Gueorgui; Filipov, Kalin; Velev, Vladimir; Grigorov, Alexander; Popov, Dimiter; Lazarov, Lazar; Stoichev, Kosta

    2008-01-01

    The paper presents both international and Bulgarian experience in assessing HRA methods, underlying models approaches for their validation and verification by benchmarking HRA methods against different NPP simulator data. The organization, status, methodology and outlooks of the studies are described

  13. Different cell disruption methods for astaxanthin recovery by Phaffia ...

    African Journals Online (AJOL)

    Y17268, drying and freeze pretreatments were tested by different cell disruption methods: abrasion with celite, glass pearls in vortex agitator, ultrasonic waves, sodium carbonate (Na2CO3) and dimethyl sulfoxide (DMSO). The method with ...

  14. Great Lakes

    Science.gov (United States)

    Edsall, Thomas A.; Mac, Michael J.; Opler, Paul A.; Puckett Haecker, Catherine E.; Doran, Peter D.

    1998-01-01

    The Great Lakes region, as defined here, includes the Great Lakes and their drainage basins in Minnesota, Wisconsin, Illinois, Indiana, Ohio, Pennsylvania, and New York. The region also includes the portions of Minnesota, Wisconsin, and the 21 northernmost counties of Illinois that lie in the Mississippi River drainage basin, outside the floodplain of the river. The region spans about 9º of latitude and 20º of longitude and lies roughly halfway between the equator and the North Pole in a lowland corridor that extends from the Gulf of Mexico to the Arctic Ocean.The Great Lakes are the most prominent natural feature of the region (Fig. 1). They have a combined surface area of about 245,000 square kilometers and are among the largest, deepest lakes in the world. They are the largest single aggregation of fresh water on the planet (excluding the polar ice caps) and are the only glacial feature on Earth visible from the surface of the moon (The Nature Conservancy 1994a).The Great Lakes moderate the region’s climate, which presently ranges from subarctic in the north to humid continental warm in the south (Fig. 2), reflecting the movement of major weather masses from the north and south (U.S. Department of the Interior 1970; Eichenlaub 1979). The lakes act as heat sinks in summer and heat sources in winter and are major reservoirs that help humidify much of the region. They also create local precipitation belts in areas where air masses are pushed across the lakes by prevailing winds, pick up moisture from the lake surface, and then drop that moisture over land on the other side of the lake. The mean annual frost-free period—a general measure of the growing-season length for plants and some cold-blooded animals—varies from 60 days at higher elevations in the north to 160 days in lakeshore areas in the south. The climate influences the general distribution of wild plants and animals in the region and also influences the activities and distribution of the human

  15. Algal Turf Recruitment and Early Growth did not Differ Across Sites that Varied Greatly in Herbivore and Coral Community Structure.

    Science.gov (United States)

    Gaynus, C.

    2016-02-01

    Worldwide losses of coral with accompanying phase shifts to algae have been attributed to human alterations of major ecological processes, especially top down (herbivory) and bottom up (nutrients) forces. While positive effects on macroalgae have received some attention, less is known about turf algae. Closely cropped turf algae (French Polynesia. While this study will continue for 2 years, data here are for 5 weeks. We chose 3 sites in Cooks Bay that likely varied in nutrients and 3 along the north shore, presumably higher in herbivory. At each site 10 recruitment tiles were deployed. Turf communities accumulated over five-weeks while benthic and herbivorous fish communities were quantified at each site. Herbivorous fish communities consisted of juveniles and adults from the families Acanthuridae and Scaridae with both adult and juvenile acanthurids, comprising > 50% of all herbivorous fish. Sites within the bay, however, contained at least 66.7% less fish than sites along the north shore. In contrast benthic surveys portrayed little difference between sites, with turf making up > 70% of total hard bottom cover. Similarly, there was little difference among sites in the recruitment and growth rate ( 0.2-0.3 mm/week) of turf on tiles. While turf recruitment and early development appeared to be unaffected by herbivory or nutrients over the short time, we predict that longer-term effects will occur as this community develops.

  16. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys.

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-09-01

    To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. We compared 148 MSM aged 18-64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010-2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%-95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  17. CO2 Dynamics in winter wheat and canola under different management practices in the Southern Great Plains

    Science.gov (United States)

    Wagle, P.; Manjunatha, P.; Gowda, P. H.; Northup, B. K.; Neel, J. P. S.; Turner, K.; Steiner, J. L.

    2017-12-01

    Rising atmospheric carbon dioxide (CO2) concentration and increased air temperature and climatic variability concerns have prompted considerable interest regarding CO2 dynamics of terrestrial ecosystems in response to major climatic and biophysical factors. However, detailed information on CO2 dynamics in winter wheat (Triticum aestivum L.) and canola (Brassica napus L.) under different agricultural management practices is lacking. As a part of the GRL-FLUXNET, a cluster of eight eddy covariance (EC) systems was deployed on the 420-ha Grazinglands Research on agroEcosystems and the ENvironment (GREEN) Farm at the United States Department of Agriculture, Agricultural Research Service (USDA-ARS), Grazinglands Research Laboratory (GRL), El Reno, OK. The GRL is also one of 18 USDA-ARS Long-Term Agroecosystem Research (LTAR) network sites in the United States. A 4-year crop rotation plan at the farm includes winter wheat for grain only, graze-grain, and graze-out, and canola under conventional till and no-till management conditions. Biometric measurements such as biomass, leaf area index (LAI), canopy cover %, canopy height, and chlorophyll content were collected approximately every 16 days to coincide with Landsat satellite overpass dates. As expected, biomass and LAI were highest in the grain only wheat fields followed by graze-grain and graze-out wheat fields, but they were similar for till and no-till wheat fields within the same grazing practice. Biomass and LAI were similar in till and no-till canola in fall 2016, but both were substantially lower in no-till compared to tilled canola during spring 2017 due to more severe winter damage. Because net ecosystem CO2 exchange (NEE) is strongly regulated by vegetation cover, the magnitudes of NEE were highest in the grain only wheat fields due to more biomass and LAI, followed by graze-grain and graze-out wheat fields. Similarly, the magnitudes of NEE were also higher in tilled canola (i.e., higher biomass and LAI) than

  18. Candidate Genes for Aggressiveness in a Natural Fusarium culmorum Population Greatly Differ between Wheat and Rye Head Blight

    Directory of Open Access Journals (Sweden)

    Valheria Castiblanco

    2018-01-01

    Full Text Available Fusarium culmorum is one of the species causing Fusarium head blight (FHB in cereals in Europe. We aimed to investigate the association between the nucleotide diversity of ten F. culmorum candidate genes and field ratings of aggressiveness in winter rye. A total of 100 F. culmorum isolates collected from natural infections were phenotyped for FHB at two locations and two years. Variance components for aggressiveness showed significant isolate and isolate-by-environment variance, as expected for quantitative host-pathogen interactions. Further analysis of the isolate-by-environment interaction revealed the dominant role of the isolate-by-year over isolate-by-location interaction. One single-nucleotide polymorphism (SNP in the cutinase (CUT gene was found to be significantly (p < 0.001 associated with aggressiveness and explained 16.05% of the genotypic variance of this trait in rye. The SNP was located 60 base pairs before the start codon, which suggests a role in transcriptional regulation. Compared to a previous study in winter wheat with the same nucleotide sequences, a larger variation of pathogen aggressiveness on rye was found and a different candidate gene was associated with pathogen aggressiveness. This is the first report on the association of field aggressiveness and a host-specific candidate gene codifying for a protein that belongs to the secretome in F. culmorum.

  19. Standardization of 57Co using different methods of LNMRI

    International Nuclear Information System (INIS)

    Rezende, E.A.; Lopes, R.T.; Silva, C.J. da; Poledna, R.; Silva, R.L. da; Tauhata, L.

    2015-01-01

    The activity of a 57 Co solution was determined using four LNMRI different measurement methods. The solution was standardized by live-timed anti-coincidence method and sum-peak method. The efficiency curve and standard-sample comparison methods were also used in this comparison. The results and their measurement uncertainties demonstrating the equivalence of these methods. As an additional contribution, the gamma emission probabilities of 57 Co were also determined. (author)

  20. Comparison of Thermal Properties Measured by Different Methods

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan [Geo Innova AB, Linkoeping (Sweden); Kukkonen, Ilmo [Geological Survey of Finland, Helsinki (Finland); Haelldahl, Lars [Hot Disk AB, Uppsala (Sweden)

    2003-04-01

    A strategy for a thermal site descriptive model of bedrock is under development at SKB. In the model different kinds of uncertainties exist. Some of these uncertainties are related to the potential errors in the methods used for determining thermal properties of rock. In two earlier investigations thermal properties of rock samples were analysed according to the TPS method (transient plane source). Thermal conductivity and thermal diffusivity were determined using the TPS method. For a comparison, the same samples have been measured at the Geological Survey of Finland (GSF), using different laboratory methods. In this later investigation, the thermal conductivity was determined using the divided-bar method and the specific heat capacity using a calorimetric method. The mean differences between the results of different methods are relatively low but the results of individual samples show large variations. The thermal conductivity measured by the divided bar method gives for most samples slightly higher values, in average about 3%, than the TPS method. The specific heat capacity measured by the calorimetric method gives lower values, in average about 2%, than the TPS method. Consequently, the thermal diffusivity calculated from thermal conductivity and specific heat capacity gives higher values, in average about 6%, than the TPS method. Reasons for the differences are estimated mainly to be dependent on differences between the samples, errors in the temperature dependence of specific heat and in the transformation from volumetric to specific heat. The TPS measurements are performed using two pieces (sub-samples) of rock. Only one of these two sub-samples was measured using the divided bar method and the calorimetric method. Further, sample preparation involved changes in the size of some of the samples. The mean differences between the results of different methods are within the margins of error reported by the measuring laboratories. However, systematic errors in

  1. Comparison of Thermal Properties Measured by Different Methods

    International Nuclear Information System (INIS)

    Sundberg, Jan; Kukkonen, Ilmo; Haelldahl, Lars

    2003-04-01

    A strategy for a thermal site descriptive model of bedrock is under development at SKB. In the model different kinds of uncertainties exist. Some of these uncertainties are related to the potential errors in the methods used for determining thermal properties of rock. In two earlier investigations thermal properties of rock samples were analysed according to the TPS method (transient plane source). Thermal conductivity and thermal diffusivity were determined using the TPS method. For a comparison, the same samples have been measured at the Geological Survey of Finland (GSF), using different laboratory methods. In this later investigation, the thermal conductivity was determined using the divided-bar method and the specific heat capacity using a calorimetric method. The mean differences between the results of different methods are relatively low but the results of individual samples show large variations. The thermal conductivity measured by the divided bar method gives for most samples slightly higher values, in average about 3%, than the TPS method. The specific heat capacity measured by the calorimetric method gives lower values, in average about 2%, than the TPS method. Consequently, the thermal diffusivity calculated from thermal conductivity and specific heat capacity gives higher values, in average about 6%, than the TPS method. Reasons for the differences are estimated mainly to be dependent on differences between the samples, errors in the temperature dependence of specific heat and in the transformation from volumetric to specific heat. The TPS measurements are performed using two pieces (sub-samples) of rock. Only one of these two sub-samples was measured using the divided bar method and the calorimetric method. Further, sample preparation involved changes in the size of some of the samples. The mean differences between the results of different methods are within the margins of error reported by the measuring laboratories. However, systematic errors in

  2. Comparison of different dose calculation methods for irregular photon fields

    International Nuclear Information System (INIS)

    Zakaria, G.A.; Schuette, W.

    2000-01-01

    In this work, 4 calculation methods (Wrede method, Clarskon method of sector integration, beam-zone method of Quast and pencil-beam method of Ahnesjoe) are introduced to calculate point doses in different irregular photon fields. The calculations cover a typical mantle field, an inverted Y-field and different blocked fields for 4 and 10 MV photon energies. The results are compared to those of measurements in a water phantom. The Clarkson and the pencil-beam method have been proved to be the methods of equal standard in relation to accuracy. Both of these methods are being distinguished by minimum deviations and applied in our clinical routine work. The Wrede and beam-zone methods deliver useful results to central beam and yet provide larger deviations in calculating points beyond the central axis. (orig.) [de

  3. Application of accelerated simulation method on NPN bipolar transistors of different technology

    International Nuclear Information System (INIS)

    Fei Wuxiong; Zheng Yuzhan; Wang Yiyuan; Chen Rui; Li Maoshun; Lan Bo; Cui Jiangwei; Zhao Yun; Lu Wu; Ren Diyuan; Wang Zhikuan; Yang Yonghui

    2010-01-01

    With different radiation methods, ionizing radiation response of NPN bipolar transistors of six different processes was investigated. The results show that the enhanced low dose rate sensitivity obviously exists in NPN bipolar transistors of the six kinds of processes. According to the experiment, the damage of decreasing temperature in step during irradiation is obviously greater than the result of irradiated at high dose rate. This irradiation method can perfectly simulate and conservatively evaluate low dose rate damage, which is of great significance to radiation effects research of bipolar devices. Finally, the mechanisms of the experimental phenomena were analyzed. (authors)

  4. KEY ELEMENTS OF HEURISTIC METHODS USAGE IN FOREIGN THEORY OF EDUCATION (ON THE BASIS OF GREAT BRITAIN

    Directory of Open Access Journals (Sweden)

    Skvortsova Svetlana Valerevna

    2013-04-01

    Full Text Available Purpose: identify key elements of employing heuristic teaching methods in foreign theory of education. Methodology: a theoretical analysis of psychological and pedagogical literature on the issues of teaching creativity. Results: on the basis of theoretical analysis the main criteria of heuristic teaching methods are revealed: repeatability; absence of a single decision; need for group discussions; flexibility; wide variability; promotion of creative teaching; influence on the character of knowledge and relationships between the teacher and the students. Heuristic teaching methods have been divided into: methods of working with information, methods of working with problems, methods of research and methods of analyzing the decisions. The main characteristics of each group of methods are presented and certain recommendations for applying them in teaching creativity are given. Practical implications: the system of education.

  5. Kinds of access: Different methods for report reveal different kinds of metacognitive access

    DEFF Research Database (Denmark)

    Overgaard, Morten; Sandberg, Kristian

    2012-01-01

    that there is not only a theoretical, but also an empirical difference between different methods of reporting. We hypothesize that differences in the sensitivity of different scales may reveal that different types of access are used to issue direct reports about experiences and metacognitive reports about...

  6. Each to his own: how different users call for different interaction methods in recommender systems

    NARCIS (Netherlands)

    Knijnenburg, B.P.; Reijmer, N.J.M.; Willemsen, M.C.; Mobasher, B.; Burke, R.

    2011-01-01

    This paper compares five different ways of interacting with an attribute-based recommender system and shows that different types of users prefer different interaction methods. In an online experiment with an energy-saving recommender system the interaction methods are compared in terms of perceived

  7. Application of Rational Expansion Method for Differential-Difference Equation

    International Nuclear Information System (INIS)

    Wang Qi

    2011-01-01

    In this paper, we applied the rational formal expansion method to construct a series of soliton-like and period-form solutions for nonlinear differential-difference equations. Compared with most existing methods, the proposed method not only recovers some known solutions, but also finds some new and more general solutions. The efficiency of the method can be demonstrated on Toda Lattice and Ablowitz-Ladik Lattice. (general)

  8. Finite Element Analysis of Increasing Column Section and CFRP Reinforcement Method under Different Axial Compression Ratio

    Science.gov (United States)

    Jinghai, Zhou; Tianbei, Kang; Fengchi, Wang; Xindong, Wang

    2017-11-01

    Eight less stirrups in the core area frame joints are simulated by ABAQUS finite element numerical software. The composite reinforcement method is strengthened with carbon fiber and increasing column section, the axial compression ratio of reinforced specimens is 0.3, 0.45 and 0.6 respectively. The results of the load-displacement curve, ductility and stiffness are analyzed, and it is found that the different axial compression ratio has great influence on the bearing capacity of increasing column section strengthening method, and has little influence on carbon fiber reinforcement method. The different strengthening schemes improve the ultimate bearing capacity and ductility of frame joints in a certain extent, composite reinforcement joints strengthening method to improve the most significant, followed by increasing column section, reinforcement method of carbon fiber reinforced joints to increase the minimum.

  9. Bilinear nodal transport method in weighted diamond difference form

    International Nuclear Information System (INIS)

    Azmy, Y.Y.

    1987-01-01

    Nodal methods have been developed and implemented for the numerical solution of the discrete ordinates neutron transport equation. Numerical testing of these methods and comparison of their results to those obtained by conventional methods have established the high accuracy of nodal methods. Furthermore, it has been suggested that the linear-linear approximation is the most computationally efficient, practical nodal approximation. Indeed, this claim has been substantiated by comparing the accuracy in the solution, and the CPU time required to achieve convergence to that solution by several nodal approximations, as well as the diamond difference scheme. Two types of linear-linear nodal methods have been developed in the literature: analytic linear-linear (NLL) methods, in which the transverse-leakage terms are derived analytically, and approximate linear-linear (PLL) methods, in which these terms are approximated. In spite of their higher accuracy, NLL methods result in very complicated discrete-variable equations that exhibit a high degree of coupling, thus requiring special solution algorithms. On the other hand, the sacrificed accuracy in PLL methods is compensated for by the simple discrete-variable equations and diamond-difference-like solution algorithm. In this paper the authors outline the development of an NLL nodal method, the bilinear method, which can be written in a weighted diamond difference form with one spatial weight per dimension that is analytically derived rather than preassigned in an ad hoc fashion

  10. Use of two detection methods to discriminate ciguatoxins from brevetoxins: application to great barracuda from Florida Keys.

    Science.gov (United States)

    Dechraoui, M-Yasmine Bottein; Tiedeken, Jessica A; Persad, Renuka; Wang, Zhihong; Granade, H Ray; Dickey, Robert W; Ramsdell, John S

    2005-09-01

    In Florida (USA), numerous cases of human ciguatera fish poisoning, as well as neurotoxic shellfish poisoning following consumption of local seafood products, have been reported. By using in parallel, the sodium channel receptor binding assay (RBA), and the ouabain/veratridine-dependent cytotoxicity assay (N2A assay), we established criteria to identify, detect, and quantify ciguatoxins in fish extracts, with a brevetoxin as internal standard. Results showed that the Caribbean ciguatoxin C-CTX-1 exhibited an 8-fold higher potency in the RBA than brevetoxins and, a 440 and 2300-fold higher potency in the N2A assay than PbTx-1 and PbTx-3, respectively. Moreover, a sensitivity comparison between assays revealed that the N2A assay was more sensitive (12-fold) for ciguatoxin analysis, whereas the RBA was more sensitive (3-24-fold) for brevetoxins analysis. Based on the relative potency between toxins and the opposite sensitivity of both assays we have used the RBA and the N2A assay to screen great barracuda (Sphyraena barracuda) collected from the Florida Keys for ciguatoxins and brevetoxins. Fish extract analysis showed a sodium channel-dependent activity consistent with the presence of ciguatoxins, and not brevetoxins. Among 40 barracudas analyzed, 60% contained ciguatoxin levels in their liver measurable by the N2A assay with the most toxic fish containing 2.1ppb C-CTX-1 equivalents.

  11. Psychological traits underlying different killing methods among Malaysian male murderers.

    Science.gov (United States)

    Kamaluddin, Mohammad Rahim; Shariff, Nadiah Syariani; Nurfarliza, Siti; Othman, Azizah; Ismail, Khaidzir H; Mat Saat, Geshina Ayu

    2014-04-01

    Murder is the most notorious crime that violates religious, social and cultural norms. Examining the types and number of different killing methods that used are pivotal in a murder case. However, the psychological traits underlying specific and multiple killing methods are still understudied. The present study attempts to fill this gap in knowledge by identifying the underlying psychological traits of different killing methods among Malaysian murderers. The study adapted an observational cross-sectional methodology using a guided self-administered questionnaire for data collection. The sampling frame consisted of 71 Malaysian male murderers from 11 Malaysian prisons who were selected using purposive sampling method. The participants were also asked to provide the types and number of different killing methods used to kill their respective victims. An independent sample t-test was performed to establish the mean score difference of psychological traits between the murderers who used single and multiple types of killing methods. Kruskal-Wallis tests were carried out to ascertain the psychological trait differences between specific types of killing methods. The results suggest that specific psychological traits underlie the type and number of different killing methods used during murder. The majority (88.7%) of murderers used a single method of killing. Multiple methods of killing was evident in 'premeditated' murder compared to 'passion' murder, and revenge was a common motive. Examples of multiple methods are combinations of stabbing and strangulation or slashing and physical force. An exception was premeditated murder committed with shooting, when it was usually a single method, attributed to the high lethality of firearms. Shooting was also notable when the motive was financial gain or related to drug dealing. Murderers who used multiple killing methods were more aggressive and sadistic than those who used a single killing method. Those who used multiple methods or

  12. Analysis of ECT Synchronization Performance Based on Different Interpolation Methods

    Directory of Open Access Journals (Sweden)

    Yang Zhixin

    2014-01-01

    Full Text Available There are two synchronization methods of electronic transformer in IEC60044-8 standard: impulsive synchronization and interpolation. When the impulsive synchronization method is inapplicability, the data synchronization of electronic transformer can be realized by using the interpolation method. The typical interpolation methods are piecewise linear interpolation, quadratic interpolation, cubic spline interpolation and so on. In this paper, the influences of piecewise linear interpolation, quadratic interpolation and cubic spline interpolation for the data synchronization of electronic transformer are computed, then the computational complexity, the synchronization precision, the reliability, the application range of different interpolation methods are analyzed and compared, which can serve as guide studies for practical applications.

  13. Methods of scaling threshold color difference using printed samples

    Science.gov (United States)

    Huang, Min; Cui, Guihua; Liu, Haoxue; Luo, M. Ronnier

    2012-01-01

    A series of printed samples on substrate of semi-gloss paper and with the magnitude of threshold color difference were prepared for scaling the visual color difference and to evaluate the performance of different method. The probabilities of perceptibly was used to normalized to Z-score and different color differences were scaled to the Z-score. The visual color difference was got, and checked with the STRESS factor. The results indicated that only the scales have been changed but the relative scales between pairs in the data are preserved.

  14. Comparison of surrogate models with different methods in ...

    Indian Academy of Sciences (India)

    In this article, polynomial regression (PR), radial basis function artificial neural network (RBFANN), and kriging ..... 10 kriging models with different parameters were also obtained. ..... shapes using stochastic optimization methods and com-.

  15. Comparison of different precondtioners for nonsymmtric finite volume element methods

    Energy Technology Data Exchange (ETDEWEB)

    Mishev, I.D.

    1996-12-31

    We consider a few different preconditioners for the linear systems arising from the discretization of 3-D convection-diffusion problems with the finite volume element method. Their theoretical and computational convergence rates are compared and discussed.

  16. Comparison between different synchronization methods of identical chaotic systems

    International Nuclear Information System (INIS)

    Haeri, Mohammad; Khademian, Behzad

    2006-01-01

    This paper studies and compares three nonadaptive (bidirectional, unidirectional, and sliding mode) and two adaptive (active control and backstepping) synchronization methods on the synchronizing of four pairs of identical chaotic systems (Chua's circuit, Roessler system, Lorenz system, and Lue system). Results from computer simulations are presented in order to illustrate the effectiveness of the methods and to compare them based on different criteria

  17. Temperature profiles of different cooling methods in porcine pancreas procurement.

    Science.gov (United States)

    Weegman, Bradley P; Suszynski, Thomas M; Scott, William E; Ferrer Fábrega, Joana; Avgoustiniatos, Efstathios S; Anazawa, Takayuki; O'Brien, Timothy D; Rizzari, Michael D; Karatzas, Theodore; Jie, Tun; Sutherland, David E R; Hering, Bernhard J; Papas, Klearchos K

    2014-01-01

    Porcine islet xenotransplantation is a promising alternative to human islet allotransplantation. Porcine pancreas cooling needs to be optimized to reduce the warm ischemia time (WIT) following donation after cardiac death, which is associated with poorer islet isolation outcomes. This study examines the effect of four different cooling Methods on core porcine pancreas temperature (n = 24) and histopathology (n = 16). All Methods involved surface cooling with crushed ice and chilled irrigation. Method A, which is the standard for porcine pancreas procurement, used only surface cooling. Method B involved an intravascular flush with cold solution through the pancreas arterial system. Method C involved an intraductal infusion with cold solution through the major pancreatic duct, and Method D combined all three cooling Methods. Surface cooling alone (Method A) gradually decreased core pancreas temperature to <10 °C after 30 min. Using an intravascular flush (Method B) improved cooling during the entire duration of procurement, but incorporating an intraductal infusion (Method C) rapidly reduced core temperature 15-20 °C within the first 2 min of cooling. Combining all methods (Method D) was the most effective at rapidly reducing temperature and providing sustained cooling throughout the duration of procurement, although the recorded WIT was not different between Methods (P = 0.36). Histological scores were different between the cooling Methods (P = 0.02) and the worst with Method A. There were differences in histological scores between Methods A and C (P = 0.02) and Methods A and D (P = 0.02), but not between Methods C and D (P = 0.95), which may highlight the importance of early cooling using an intraductal infusion. In conclusion, surface cooling alone cannot rapidly cool large (porcine or human) pancreata. Additional cooling with an intravascular flush and intraductal infusion results in improved core porcine pancreas temperature profiles during procurement and

  18. Image and Imaging an Emergency Department: Expense and Benefit of Different Quality Assessment Methods

    Directory of Open Access Journals (Sweden)

    Carmen Andrea Pfortmueller

    2013-01-01

    Full Text Available Introduction. In this era of high-tech medicine, it is becoming increasingly important to assess patient satisfaction. There are several methods to do so, but these differ greatly in terms of cost, time, and labour and external validity. The aim of this study is to describe and compare the structure and implementation of different methods to assess the satisfaction of patients in an emergency department. Methods. The structure and implementation of the different methods to assess patient satisfaction were evaluated on the basis of a 90-minute standardised interview. Results. We identified a total of six different methods in six different hospitals. The average number of patients assessed was 5012, with a range from 230 (M5 to 20 000 patients (M2. In four methods (M1, M3, M5, and M6, the questionnaire was composed by a specialised external institute. In two methods, the questionnaire was created by the hospital itself (M2, M4.The median response rate was 58.4% (range 9–97.8%. With a reminder, the response rate increased by 60% (M3. Conclusion. The ideal method to assess patient satisfaction in the emergency department setting is to use a patient-based, in-emergency department-based assessment of patient satisfaction, planned and guided by expert personnel.

  19. Preliminary comparison of different reduction methods of graphene

    Indian Academy of Sciences (India)

    The reduction of graphene oxide (GO) is a promising route to bulk produce graphene-based sheets. Different reduction processes result in reduced graphene oxide (RGO) with different properties. In this paper three reduction methods, chemical, thermal and electrochemical reduction, were compared on three aspects ...

  20. Efficacy of different treatment methods for ADHD and associated ...

    African Journals Online (AJOL)

    This study investigated the efficacy of different treatment methods for Attention Deficit Hyperactivity Disorder (ADHD) in improving attention, and neuromotor difficulties. Children (N=95, 60 boys; 35 girls) with a mean age of 6.99+0.64 years were divided into five groups that represented different treatment modes: ...

  1. Explicit Finite Difference Methods for the Delay Pseudoparabolic Equations

    Directory of Open Access Journals (Sweden)

    I. Amirali

    2014-01-01

    Full Text Available Finite difference technique is applied to numerical solution of the initial-boundary value problem for the semilinear delay Sobolev or pseudoparabolic equation. By the method of integral identities two-level difference scheme is constructed. For the time integration the implicit rule is being used. Based on the method of energy estimates the fully discrete scheme is shown to be absolutely stable and convergent of order two in space and of order one in time. The error estimates are obtained in the discrete norm. Some numerical results confirming the expected behavior of the method are shown.

  2. Stability and non-standard finite difference method of the generalized Chua's circuit

    KAUST Repository

    Radwan, Ahmed G.

    2011-08-01

    In this paper, we develop a framework to obtain approximate numerical solutions of the fractional-order Chua\\'s circuit with Memristor using a non-standard finite difference method. Chaotic response is obtained with fractional-order elements as well as integer-order elements. Stability analysis and the condition of oscillation for the integer-order system are discussed. In addition, the stability analyses for different fractional-order cases are investigated showing a great sensitivity to small order changes indicating the poles\\' locations inside the physical s-plane. The GrnwaldLetnikov method is used to approximate the fractional derivatives. Numerical results are presented graphically and reveal that the non-standard finite difference scheme is an effective and convenient method to solve fractional-order chaotic systems, and to validate their stability. © 2011 Elsevier Ltd. All rights reserved.

  3. High order spectral difference lattice Boltzmann method for incompressible hydrodynamics

    Science.gov (United States)

    Li, Weidong

    2017-09-01

    This work presents a lattice Boltzmann equation (LBE) based high order spectral difference method for incompressible flows. In the present method, the spectral difference (SD) method is adopted to discretize the convection and collision term of the LBE to obtain high order (≥3) accuracy. Because the SD scheme represents the solution as cell local polynomials and the solution polynomials have good tensor-product property, the present spectral difference lattice Boltzmann method (SD-LBM) can be implemented on arbitrary unstructured quadrilateral meshes for effective and efficient treatment of complex geometries. Thanks to only first oder PDEs involved in the LBE, no special techniques, such as hybridizable discontinuous Galerkin method (HDG), local discontinuous Galerkin method (LDG) and so on, are needed to discrete diffusion term, and thus, it simplifies the algorithm and implementation of the high order spectral difference method for simulating viscous flows. The proposed SD-LBM is validated with four incompressible flow benchmarks in two-dimensions: (a) the Poiseuille flow driven by a constant body force; (b) the lid-driven cavity flow without singularity at the two top corners-Burggraf flow; and (c) the unsteady Taylor-Green vortex flow; (d) the Blasius boundary-layer flow past a flat plate. Computational results are compared with analytical solutions of these cases and convergence studies of these cases are also given. The designed accuracy of the proposed SD-LBM is clearly verified.

  4. Chebyshev Finite Difference Method for Fractional Boundary Value Problems

    Directory of Open Access Journals (Sweden)

    Boundary

    2015-09-01

    Full Text Available This paper presents a numerical method for fractional differential equations using Chebyshev finite difference method. The fractional derivatives are described in the Caputo sense. Numerical results show that this method is of high accuracy and is more convenient and efficient for solving boundary value problems involving fractional ordinary differential equations. AMS Subject Classification: 34A08 Keywords and Phrases: Chebyshev polynomials, Gauss-Lobatto points, fractional differential equation, finite difference 1. Introduction The idea of a derivative which interpolates between the familiar integer order derivatives was introduced many years ago and has gained increasing importance only in recent years due to the development of mathematical models of a certain situations in engineering, materials science, control theory, polymer modelling etc. For example see [20, 22, 25, 26]. Most fractional order differential equations describing real life situations, in general do not have exact analytical solutions. Several numerical and approximate analytical methods for ordinary differential equation Received: December 2014; Accepted: March 2015 57 Journal of Mathematical Extension Vol. 9, No. 3, (2015, 57-71 ISSN: 1735-8299 URL: http://www.ijmex.com Chebyshev Finite Difference Method for Fractional Boundary Value Problems H. Azizi Taft Branch, Islamic Azad University Abstract. This paper presents a numerical method for fractional differential equations using Chebyshev finite difference method. The fractional derivative

  5. Stability and retention of micronutrients in fortified rice prepared using different cooking methods.

    Science.gov (United States)

    Wieringa, Frank T; Laillou, Arnaud; Guyondet, Christophe; Jallier, Vincent; Moench-Pfanner, Regina; Berger, Jacques

    2014-09-01

    Fortified rice holds great potential for bringing essential micronutrients to a large part of the world population. However, it is unknown whether differences in cooking methods or in production of rice premix affect the final amount of micronutrient consumed. This paper presents a study that quantified the losses of five different micronutrients (vitamin A, iron, zinc, folic acid, and vitamin B12) in fortified rice that was produced using three different techniques (hot extrusion, cold extrusion, and coating) during cooking and five different cooking methods (absorption method with or without soaking, washing before cooking, cooking in excess water, and frying rice before cooking). Fortified rice premix from six different producers (two for each technique) was mixed with normal rice in a 1:100 ratio. Each sample was prepared in triplicate, using the five different cooking methods, and retention of iron, zinc, vitamin A, vitamin B12, and folic acid was determined. It was found that the overall retention of iron, zinc, vitamin B12, and folic acid was between 75% and 100% and was unaffected by cooking method, while the retention of vitamin A was significantly affected by cooking method, with retention ranging from 0% (excess water) to 80% (soaking), depending on the cooking method and producer of the rice premix. No systematic differences between the different production methods were observed. We conclude that different cooking methods of rice as used in different regions of the world do not lead to a major loss of most micronutrients, with the exception of vitamin A. The factors involved in protecting vitamin A against losses during cooking need to be identified. All production techniques of rice premix yielded similar results, showing that coating is not inferior to extrusion techniques. Standard overages (50%) for vitamin B12 and folic acid are too high. © 2014 New York Academy of Sciences.

  6. [Comparision of Different Methods of Area Measurement in Irregular Scar].

    Science.gov (United States)

    Ran, D; Li, W J; Sun, Q G; Li, J Q; Xia, Q

    2016-10-01

    To determine a measurement standard of irregular scar area by comparing the advantages and disadvantages of different measurement methods in measuring same irregular scar area. Irregular scar area was scanned by digital scanning and measured by coordinate reading method, AutoCAD pixel method, Photoshop lasso pixel method, Photoshop magic bar filled pixel method and Foxit PDF reading software, and some aspects of these methods such as measurement time, repeatability, whether could be recorded and whether could be traced were compared and analyzed. There was no significant difference in the scar areas by the measurement methods above. However, there was statistical difference in the measurement time and repeatability by one or multi performers and only Foxit PDF reading software could be traced back. The methods above can be used for measuring scar area, but each one has its advantages and disadvantages. It is necessary to develop new measurement software for forensic identification. Copyright© by the Editorial Department of Journal of Forensic Medicine

  7. Kinds of access: different methods for report reveal different kinds of metacognitive access

    Science.gov (United States)

    Overgaard, Morten; Sandberg, Kristian

    2012-01-01

    In experimental investigations of consciousness, participants are asked to reflect upon their own experiences by issuing reports about them in different ways. For this reason, a participant needs some access to the content of her own conscious experience in order to report. In such experiments, the reports typically consist of some variety of ratings of confidence or direct descriptions of one's own experiences. Whereas different methods of reporting are typically used interchangeably, recent experiments indicate that different results are obtained with different kinds of reporting. We argue that there is not only a theoretical, but also an empirical difference between different methods of reporting. We hypothesize that differences in the sensitivity of different scales may reveal that different types of access are used to issue direct reports about experiences and metacognitive reports about the classification process. PMID:22492747

  8. A "shotgun" method for tracing the birth locations of sheep from flock tags, applied to scrapie surveillance in Great Britain.

    Science.gov (United States)

    Birch, Colin P D; Del Rio Vilas, Victor J; Chikukwa, Ambrose C

    2010-09-01

    Movement records are often used to identify animal sample provenance by retracing the movements of individuals. Here we present an alternative method, which uses the same identity tags and movement records as are used to retrace movements, but ignores individual movement paths. The first step uses a simple query to identify the most likely birth holding for every identity tag included in a database recording departures from agricultural holdings. The second step rejects a proportion of the birth holding locations to leave a list of birth holding locations that are relatively reliable. The method was used to trace the birth locations of sheep sampled for scrapie in abattoirs, or on farm as fallen stock. Over 82% of the sheep sampled in the fallen stock survey died at the holding of birth. This lack of movement may be an important constraint on scrapie transmission. These static sheep provided relatively reliable birth locations, which were used to define criteria for selecting reliable traces. The criteria rejected 16.8% of fallen stock traces and 11.9% of abattoir survey traces. Two tests provided estimates that selection reduced error in fallen stock traces from 11.3% to 3.2%, and in abattoir survey traces from 8.1% to 1.8%. This method generated 14,591 accepted traces of fallen stock from samples taken during 2002-2005 and 83,136 accepted traces from abattoir samples. The absence or ambiguity of flock tag records at the time of slaughter prevented the tracing of 16-24% of abattoir samples during 2002-2004, although flock tag records improved in 2005. The use of internal scoring to generate and evaluate results from the database query, and the confirmation of results by comparison with other database fields, are analogous to methods used in web search engines. Such methods may have wide application in tracing samples and in adding value to biological datasets. Crown Copyright 2010. Published by Elsevier B.V. All rights reserved.

  9. Similarities and differences in imperial administration Great Britain in Egypt and Austria-Hungary in Bosnia-Herzegovina 1878-1903

    Directory of Open Access Journals (Sweden)

    Nikolić Anja

    2016-01-01

    Full Text Available This article discusses the similarities and differences of the position of Great Britain in Egypt and Austria-Hungary in Bosnia-Herzegovina in the age of New Imperialism. Comparative approach will allow us to put both situations in their historical context. Austria-Hungary’s absorption of Bosnia-Herzegovina was part of colonial involvement throughout the world. Egypt and Bosnia-Herzegovina were formally parts of the Ottoman Empire, although occupied and administrated by European Powers. Two administrators, Evelyn Baring as consul-general in Egypt and Benjamin von Kállay as civil administrator of Bosnia-Herzegovina, believed that it was their duty to bring “civilization”, prosperity and western culture to these lands - a classic argumentation found in the New Imperialism discourse. One of the most important tasks for both administrators was fighting the national movements, which led to the suppression of political freedoms and the introduction of a large administrative apparatus to govern the newly-occupied lands. Complete control over political life and the educational system was also one of the major features of both administrations. Both Great Britain in Egypt and Austria-Hungary in Bosnia-Herzegovina never tackled the agrarian question for their own political reasons. British rule in Egypt and Austro-Hungarian in Bosnia-Herzegovina bore striking resemblances.

  10. Differential and difference equations a comparison of methods of solution

    CERN Document Server

    Maximon, Leonard C

    2016-01-01

    This book, intended for researchers and graduate students in physics, applied mathematics and engineering, presents a detailed comparison of the important methods of solution for linear differential and difference equations - variation of constants, reduction of order, Laplace transforms and generating functions - bringing out the similarities as well as the significant differences in the respective analyses. Equations of arbitrary order are studied, followed by a detailed analysis for equations of first and second order. Equations with polynomial coefficients are considered and explicit solutions for equations with linear coefficients are given, showing significant differences in the functional form of solutions of differential equations from those of difference equations. An alternative method of solution involving transformation of both the dependent and independent variables is given for both differential and difference equations. A comprehensive, detailed treatment of Green’s functions and the associat...

  11. Stochastic rainfall synthesis for urban applications using different regionalization methods

    Science.gov (United States)

    Callau Poduje, A. C.; Leimbach, S.; Haberlandt, U.

    2017-12-01

    The proper design and efficient operation of urban drainage systems require long and continuous rainfall series in a high temporal resolution. Unfortunately, these time series are usually available in a few locations and it is therefore suitable to develop a stochastic precipitation model to generate rainfall in locations without observations. The model presented is based on an alternating renewal process and involves an external and an internal structure. The members of these structures are described by probability distributions which are site specific. Different regionalization methods based on site descriptors are presented which are used for estimating the distributions for locations without observations. Regional frequency analysis, multiple linear regressions and a vine-copula method are applied for this purpose. An area located in the north-west of Germany is used to compare the different methods and involves a total of 81 stations with 5 min rainfall records. The site descriptors include information available for the whole region: position, topography and hydrometeorologic characteristics which are estimated from long term observations. The methods are compared directly by cross validation of different rainfall statistics. Given that the model is stochastic the evaluation is performed based on ensembles of many long synthetic time series which are compared with observed ones. The performance is as well indirectly evaluated by setting up a fictional urban hydrological system to test the capability of the different methods regarding flooding and overflow characteristics. The results show a good representation of the seasonal variability and good performance in reproducing the sample statistics of the rainfall characteristics. The copula based method shows to be the most robust of the three methods. Advantages and disadvantages of the different methods are presented and discussed.

  12. Comparison of Different Drying Methods for Recovery of Mushroom DNA.

    Science.gov (United States)

    Wang, Shouxian; Liu, Yu; Xu, Jianping

    2017-06-07

    Several methods have been reported for drying mushroom specimens for population genetic, taxonomic, and phylogenetic studies. However, most methods have not been directly compared for their effectiveness in preserving mushroom DNA. In this study, we compared silica gel drying at ambient temperature and oven drying at seven different temperatures. Two mushroom species representing two types of fruiting bodies were examined: the fleshy button mushroom Agaricus bisporus and the leathery shelf fungus Trametes versicolor. For each species dried with the eight methods, we assessed the mushroom water loss rate, the quality and quantity of extracted DNA, and the effectiveness of using the extracted DNA as a template for PCR amplification of two DNA fragments (ITS and a single copy gene). Dried specimens from all tested methods yielded sufficient DNA for PCR amplification of the two genes in both species. However, differences among the methods for the two species were found in: (i) the time required by different drying methods for the fresh mushroom tissue to reach a stable weight; and (ii) the relative quality and quantity of the extracted genomic DNA. Among these methods, oven drying at 70 °C for 3-4 h seemed the most efficient for preserving field mushroom samples for subsequent molecular work.

  13. Fatty acid profiles of great tit ( Parus major) eggs differ between urban and rural habitats, but not between coniferous and deciduous forests

    Science.gov (United States)

    Toledo, Alejandra; Andersson, Martin N.; Wang, Hong-Lei; Salmón, Pablo; Watson, Hannah; Burdge, Graham C.; Isaksson, Caroline

    2016-08-01

    Early-life nutrition is an important determinant of both short- and long-term performance and fitness. The avian embryo develops within an enclosed package of nutrients, of which fatty acids (FA) are essential for many aspects of development. The FA composition of yolk depends on maternal nutrition and condition prior to egg formation, which may be affected by the external environment. To test if maternal environment affects yolk FA composition, we investigated whether the FA composition of great tit ( Parus major) egg yolks differed between urban and rural habitats, and between deciduous and coniferous habitats. The results reveal differences in FA composition between eggs laid in urban and rural habitats, but not between eggs from the coniferous and deciduous habitats. To a large extent, this difference likely reflects dietary differences associated with urban habitats rather than dominating vegetation type. Specifically, urban yolks contained lower proportions of both ω-3 and ω-6 polyunsaturated FAs (PUFA), which are important for chick development. We also found a positive association between the proportion of saturated fatty acids and laying date, and a negative association between the proportion of ω-6 PUFA and clutch size. Given that urbanization is expanding rapidly, future studies should investigate whether factors such as anthropogenic food in the urban environment underlie these differences and whether they impair chick development.

  14. Band selection method based on spectrum difference in targets of interest in hyperspectral imagery

    Science.gov (United States)

    Zhang, Xiaohan; Yang, Guang; Yang, Yongbo; Huang, Junhua

    2016-10-01

    While hyperspectral data shares rich spectrum information, it has numbers of bands with high correlation coefficients, causing great data redundancy. A reasonable band selection is important for subsequent processing. Bands with large amount of information and low correlation should be selected. On this basis, according to the needs of target detection applications, the spectral characteristics of the objects of interest are taken into consideration in this paper, and a new method based on spectrum difference is proposed. Firstly, according to the spectrum differences of targets of interest, a difference matrix which represents the different spectral reflectance of different targets in different bands is structured. By setting a threshold, the bands satisfying the conditions would be left, constituting a subset of bands. Then, the correlation coefficients between bands are calculated and correlation matrix is given. According to the size of the correlation coefficient, the bands can be set into several groups. At last, the conception of normalized variance is used on behalf of the information content of each band. The bands are sorted by the value of its normalized variance. Set needing number of bands, and the optimum band combination solution can be get by these three steps. This method retains the greatest degree of difference between the target of interest and is easy to achieve by computer automatically. Besides, false color image synthesis experiment is carried out using the bands selected by this method as well as other 3 methods to show the performance of method in this paper.

  15. EFFECTS OF DIFFERENT NUMERICAL INTERFACE METHODS ON HYDRODYNAMICS INSTABILITY

    Energy Technology Data Exchange (ETDEWEB)

    FRANCOIS, MARIANNE M. [Los Alamos National Laboratory; DENDY, EDWARD D. [Los Alamos National Laboratory; LOWRIE, ROBERT B. [Los Alamos National Laboratory; LIVESCU, DANIEL [Los Alamos National Laboratory; STEINKAMP, MICHAEL J. [Los Alamos National Laboratory

    2007-01-11

    The authors compare the effects of different numerical schemes for the advection and material interface treatments on the single-mode Rayleigh-Taylor instability, using the RAGE hydro-code. The interface growth and its surface density (interfacial area) versus time are investigated. The surface density metric shows to be better suited to characterize the difference in the flow, than the conventional interface growth metric. They have found that Van Leer's limiter combined to no interface treatment leads to the largest surface area. Finally, to quantify the difference between the numerical methods they have estimated the numerical viscosity in the linear-regime at different scales.

  16. Nonstandard Finite Difference Method Applied to a Linear Pharmacokinetics Model

    Directory of Open Access Journals (Sweden)

    Oluwaseun Egbelowo

    2017-05-01

    Full Text Available We extend the nonstandard finite difference method of solution to the study of pharmacokinetic–pharmacodynamic models. Pharmacokinetic (PK models are commonly used to predict drug concentrations that drive controlled intravenous (I.V. transfers (or infusion and oral transfers while pharmacokinetic and pharmacodynamic (PD interaction models are used to provide predictions of drug concentrations affecting the response of these clinical drugs. We structure a nonstandard finite difference (NSFD scheme for the relevant system of equations which models this pharamcokinetic process. We compare the results obtained to standard methods. The scheme is dynamically consistent and reliable in replicating complex dynamic properties of the relevant continuous models for varying step sizes. This study provides assistance in understanding the long-term behavior of the drug in the system, and validation of the efficiency of the nonstandard finite difference scheme as the method of choice.

  17. Impact of Different Creatinine Measurement Methods on Liver Transplant Allocation

    Science.gov (United States)

    Kaiser, Thorsten; Kinny-Köster, Benedict; Bartels, Michael; Parthaune, Tanja; Schmidt, Michael; Thiery, Joachim

    2014-01-01

    Introduction The model for end-stage liver disease (MELD) score is used in many countries to prioritize organ allocation for the majority of patients who require orthotopic liver transplantation. This score is calculated based on the following laboratory parameters: creatinine, bilirubin and the international normalized ratio (INR). Consequently, high measurement accuracy is essential for equitable and fair organ allocation. For serum creatinine measurements, the Jaffé method and enzymatic detection are well-established routine diagnostic tests. Methods A total of 1,013 samples from 445 patients on the waiting list or in evaluation for liver transplantation were measured using both creatinine methods from November 2012 to September 2013 at the university hospital Leipzig, Germany. The measurements were performed in parallel according to the manufacturer’s instructions after the samples arrived at the institute of laboratory medicine. Patients who had required renal replacement therapy twice in the previous week were excluded from analyses. Results Despite the good correlation between the results of both creatinine quantification methods, relevant differences were observed, which led to different MELD scores. The Jaffé measurement led to greater MELD score in 163/1,013 (16.1%) samples with differences of up to 4 points in one patient, whereas differences of up to 2 points were identified in 15/1,013 (1.5%) samples using the enzymatic assay. Overall, 50/152 (32.9%) patients with MELD scores >20 had higher scores when the Jaffé method was used. Discussion Using the Jaffé method to measure creatinine levels in samples from patients who require liver transplantation may lead to a systematic preference in organ allocation. In this study, the differences were particularly pronounced in samples with MELD scores >20, which has clinical relevance in the context of urgency of transplantation. These data suggest that official recommendations are needed to determine which

  18. Clinical value of different detection methods in blunt ocular trauma

    Directory of Open Access Journals (Sweden)

    Yang Li

    2018-02-01

    Full Text Available Blunt ocular can cause persistent change of eye structure and function, the method of detection which is closely related to eye injury including B-can ultrasonography, UBM, OCT, FFA, scanning laser polarimetry, fundus autofluorescence, each examination with particular emphasis. This paper aims to review the advantages and disadvantages of different inspection methods in order to provide reference for clinical diagnosis and treatment of blunt ocular trauma.

  19. Comparison of mentha extracts obtained by different extraction methods

    Directory of Open Access Journals (Sweden)

    Milić Slavica

    2006-01-01

    Full Text Available The different methods of mentha extraction, such as steam distillation, extraction by methylene chloride (Soxhlet extraction and supercritical fluid extraction (SFE by carbon dioxide (CO J were investigated. SFE by CO, was performed at pressure of 100 bar and temperature of40°C. The extraction yield, as well as qualitative and quantitative composition of obtained extracts, determined by GC-MS method, were compared.

  20. Comparison between different synchronization methods of identical chaotic systems

    Energy Technology Data Exchange (ETDEWEB)

    Haeri, Mohammad [Advanced Control System Laboratory, Electrical Engineering Department, Sharif University of Technology, Azadi Avenue, P.O. Box 11365-9363 Tehran (Iran, Islamic Republic of)]. E-mail: haeri@sina.sharif.edu; Khademian, Behzad [Advanced Control System Laboratory, Electrical Engineering Department, Sharif University of Technology, Azadi Avenue, P.O. Box 11365-9363 Tehran (Iran, Islamic Republic of)

    2006-08-15

    This paper studies and compares three nonadaptive (bidirectional, unidirectional, and sliding mode) and two adaptive (active control and backstepping) synchronization methods on the synchronizing of four pairs of identical chaotic systems (Chua's circuit, Roessler system, Lorenz system, and Lue system). Results from computer simulations are presented in order to illustrate the effectiveness of the methods and to compare them based on different criteria.

  1. Study on color difference estimation method of medicine biochemical analysis

    Science.gov (United States)

    Wang, Chunhong; Zhou, Yue; Zhao, Hongxia; Sun, Jiashi; Zhou, Fengkun

    2006-01-01

    The biochemical analysis in medicine is an important inspection and diagnosis method in hospital clinic. The biochemical analysis of urine is one important item. The Urine test paper shows corresponding color with different detection project or different illness degree. The color difference between the standard threshold and the test paper color of urine can be used to judge the illness degree, so that further analysis and diagnosis to urine is gotten. The color is a three-dimensional physical variable concerning psychology, while reflectance is one-dimensional variable; therefore, the estimation method of color difference in urine test can have better precision and facility than the conventional test method with one-dimensional reflectance, it can make an accurate diagnose. The digital camera is easy to take an image of urine test paper and is used to carry out the urine biochemical analysis conveniently. On the experiment, the color image of urine test paper is taken by popular color digital camera and saved in the computer which installs a simple color space conversion (RGB -> XYZ -> L *a *b *)and the calculation software. Test sample is graded according to intelligent detection of quantitative color. The images taken every time were saved in computer, and the whole illness process will be monitored. This method can also use in other medicine biochemical analyses that have relation with color. Experiment result shows that this test method is quick and accurate; it can be used in hospital, calibrating organization and family, so its application prospect is extensive.

  2. Estimation of citicoline sodium in tablets by difference spectrophotometric method

    Directory of Open Access Journals (Sweden)

    Sagar Suman Panda

    2013-01-01

    Full Text Available Aim: The present work deals with development and validation of a novel, precise, and accurate spectrophotometric method for the estimation of citicoline sodium (CTS in tablets. This spectrophotometric method is based on the principle that CTS shows two different forms that differs in the absorption spectra in basic and acidic medium. Materials and Methods: The present work was being carried out on Shimadzu 1800 Double Beam UV-visible spectrophotometer. Difference spectra were generated using 10 mm quartz cells over the range of 200-400 nm. Solvents used were 0.1 M NaOH and 0.1 M HCl. Results: The maxima and minima in the difference spectra of CTS were found to be 239 nm and 283 nm, respectively. Amplitude was calculated from the maxima and minima of spectrum. The drug follows linearity in the range of 1-50 μ/ml (R 2 = 0.999. The average % recovery from the tablet formulation was found to be 98.47%. The method was validated as per International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use: ICH Q2(R1 Validation of Analytical Procedures: Text and Methodology guidelines. Conclusion: This method is simple and inexpensive. Hence it can be applied for determination of the drug in pharmaceutical dosage forms.

  3. Reproducing Kernel Method for Solving Nonlinear Differential-Difference Equations

    Directory of Open Access Journals (Sweden)

    Reza Mokhtari

    2012-01-01

    Full Text Available On the basis of reproducing kernel Hilbert spaces theory, an iterative algorithm for solving some nonlinear differential-difference equations (NDDEs is presented. The analytical solution is shown in a series form in a reproducing kernel space, and the approximate solution , is constructed by truncating the series to terms. The convergence of , to the analytical solution is also proved. Results obtained by the proposed method imply that it can be considered as a simple and accurate method for solving such differential-difference problems.

  4. Different methods of measuring ADC values in normal human brain

    International Nuclear Information System (INIS)

    Wei Youping; Sheng Junkang; Zhang Caiyuan

    2009-01-01

    Objective: To investigate better method of measuring ADC values of normal brain, and provide reference for further research. Methods: Twenty healthy people's MR imaging were reviewed. All of them underwent routine MRI scans and echo-planar diffusion-weighted imaging (DWI), and ADC maps were reconstructed on work station. Six regions of interest (ROI) were selected for each object, the mean ADC values were obtained for each position on DWI and ADC maps respectively. Results: On the anisotropic DWI map calculated in the hypothalamus, ADC M , ADC P , ADC S values were no significant difference (P>0.05), in the frontal white matter and internal capsule hindlimb, there was a significant difference (P ave value exist significant difference to direct measurement on the anisotropic (isotropic) ADC map (P<0.001). Conclusion: Diffusion of water in the frontal white matter and internal capsule are anisotropic, but it is isotropic in the hypothalamus; different quantitative methods of diffusion measurement of 4ADC values have significant difference, but ADC values calculated through the DWI map is more accurate, quantitative diffusion study of brain tissue should also consider the diffusion measurement method. (authors)

  5. Maxillary sinusitis - a comparative study of different imaging diagnosis methods

    International Nuclear Information System (INIS)

    Hueb, Marcelo Miguel; Borges, Fabiano de Almeida; Pulcinelli, Emilte; Souza, Wandir Ferreira; Borges, Luiz Marcondes

    1999-01-01

    We conducted prospective study comparing different methods (plain X-rays, computed tomography and ultrasonography mode-A) for the initial diagnosis of maxillary sinusitis. Twenty patients (40 maxillary sinuses) with a clinical history suggestive of sinusitis included in this study. The results were classified as abnormal or normal, using computed tomography as gold standard. The sensitivity for ultrasonography and plain X-rays was 84.6% and 69.2%, respectively. The specificity of both methods was 92.6%. This study suggests that ultrasonography can be used as a good follow-up method for patients with maxillary. sinusitis. (author)

  6. Evaluation of Callable Bonds: Finite Difference Methods, Stability and Accuracy.

    OpenAIRE

    Buttler, Hans-Jurg

    1995-01-01

    The purpose of this paper is to evaluate numerically the semi-American callable bond by means of finite difference methods. This study implies three results. First, the numerical error is greater for the callable bond price than for the straight bond price, and too large for real applications Secondly, the numerical accuracy of the callable bond price computed for the relevant range of interest rates depends entirely on the finite difference scheme which is chosen for the boundary points. Thi...

  7. Testing Convergence of Different Free-Energy Methods in a Simple Analytical System with Hidden Barriers

    Directory of Open Access Journals (Sweden)

    S. Alexis Paz

    2018-03-01

    Full Text Available In this work, we study the influence of hidden barriers on the convergence behavior of three free-energy calculation methods: well-tempered metadynamics (WTMD, adaptive-biasing forces (ABF, and on-the-fly parameterization (OTFP. We construct a simple two-dimensional potential-energy surfaces (PES that allows for an exact analytical result for the free-energy in any one-dimensional order parameter. Then we chose different CV definitions and PES parameters to create three different systems with increasing sampling challenges. We find that all three methods are not greatly affected by the hidden-barriers in the simplest case considered. The adaptive sampling methods show faster sampling while the auxiliary high-friction requirement of OTFP makes it slower for this case. However, a slight change in the CV definition has a strong impact in the ABF and WTMD performance, illustrating the importance of choosing suitable collective variables.

  8. The review and results of different methods for facial recognition

    Science.gov (United States)

    Le, Yifan

    2017-09-01

    In recent years, facial recognition draws much attention due to its wide potential applications. As a unique technology in Biometric Identification, facial recognition represents a significant improvement since it could be operated without cooperation of people under detection. Hence, facial recognition will be taken into defense system, medical detection, human behavior understanding, etc. Several theories and methods have been established to make progress in facial recognition: (1) A novel two-stage facial landmark localization method is proposed which has more accurate facial localization effect under specific database; (2) A statistical face frontalization method is proposed which outperforms state-of-the-art methods for face landmark localization; (3) It proposes a general facial landmark detection algorithm to handle images with severe occlusion and images with large head poses; (4) There are three methods proposed on Face Alignment including shape augmented regression method, pose-indexed based multi-view method and a learning based method via regressing local binary features. The aim of this paper is to analyze previous work of different aspects in facial recognition, focusing on concrete method and performance under various databases. In addition, some improvement measures and suggestions in potential applications will be put forward.

  9. CO2 emissions accounting: Whether, how, and when different allocation methods should be used

    International Nuclear Information System (INIS)

    Levihn, Fabian

    2014-01-01

    CO 2 abatement and the transition to sustainable energy systems are of great concern, calling for investments in both old and new technologies. There are many perspectives on how to account for these emissions, not least when it comes to how the roles of different alternative energy production options should be emphasized. Confusion and conflicting interests regarding the appropriate accounting methods for allocating CO 2 emissions interfere with effective energy policy and the efficient use of corporate and national resources. Possible investments in the Stockholm district heating network and how they interact with the electric power grid illustrate the influence of different accounting methods on alternative energy production options. The results indicate that, for several abatement options, performance in terms of reduced CO 2 emissions might be either improved or degraded depending on whether or how alternative electricity production is accounted for. The results provide guidelines for whether, how, and when different allocation methods are appropriate, guidelines relevant to academia, industrial leaders, and policymakers in multiple areas related to power production and consumption. - Highlights: • Involvement in the discussion of CO 2 emission allocation is needed from academia. • Abatement options for the district heating in Stockholm were analyzed in relation to power production and the EU ETS. • Implications of different allocation methods are discussed in relation to different analytical purposes and boundaries. • Conclusions are made on when the different allocation methods are appropriate

  10. More than Method?: A Discussion of Paradigm Differences within Mixed Methods Research

    Science.gov (United States)

    Harrits, Gitte Sommer

    2011-01-01

    This article challenges the idea that mixed methods research (MMR) constitutes a coherent research paradigm and explores how different research paradigms exist within MMR. Tracing paradigmatic differences at the level of methods, ontology, and epistemology, two MMR strategies are discussed: nested analysis, recently presented by the American…

  11. Effects of different methods of breaking dormancy and seed ...

    African Journals Online (AJOL)

    Seed dormancy in palms, date palm inclusive have continued to be challenging especially when cultivating through seeds. This study evaluated different methods of breaking dormancy and seed germination rate in P. dactylifera. Using Completely Randomize Design, two varieties of P. dactylifera were treated with three ...

  12. Effect of different rates and methods of benomyl and mancozeb ...

    African Journals Online (AJOL)

    AJB SERVER

    2006-07-22

    Jul 22, 2006 ... Field assessment of different rates and methods of three fungicide applications on delay in senescence. (DS) and grain ... Out of 170 species in the genus, V. unguiculata is ... The experiment was conducted at the teaching and research farm of Faculty of Agricultural Sciences, Ladoke Akintola University of.

  13. Effect of different seeding methods on green manure biomass, soil ...

    African Journals Online (AJOL)

    Effect of different seeding methods on green manure biomass, soil properties and rice yield in rice-based cropping systems. ... The effects of treatments on rice yield and its components were also investigated. ... Based on the results, BBRH and PTS are good practices for production of green manure in paddy soil. Chemical ...

  14. Broadband phase difference method for ultrasonic velocimetry in molten glass

    International Nuclear Information System (INIS)

    Kikura, Hiroshige; Ihara, Tomonori

    2016-01-01

    This study aims to develop ultrasonic Doppler velocimetry in molten glass. Realization of such a technique has two difficulties: ultrasonic transmission into molten salt and Doppler signal processing. Buffer rod technique was developed in our research to transmit ultrasound into high temperature molten glass. This article discusses newly developed signal processing technique named broadband phase difference method. (J.P.N.)

  15. Effects of different traditional cooking methods on nutrients and ...

    African Journals Online (AJOL)

    The objective of this research was to determine the effect of cooking using two different methods of preparing okra soup in Ondo state on nutrient, mineral content including zinc bioavailability of okra, Abelmoschus esculentus. The okra fruits were grated and divided into four lots; two lots were cooked with other ingredients of ...

  16. Thermal test requirements and their verification by different test methods

    International Nuclear Information System (INIS)

    Droste, B.; Wieser, G.; Probst, U.

    1993-01-01

    The paper discusses the parameters influencing the thermal test conditions for type B-packages. Criteria for different test methods (by analytical as well as by experimental means) will be developed. A comparison of experimental results from fuel oil pool and LPG fire tests will be given. (J.P.N.)

  17. Immunoreactivity of 125I-papain labelled by different methods

    International Nuclear Information System (INIS)

    Rauch, P.; Fukal, L.; Kas, J.; Tykva, R.

    1984-01-01

    Three different methods of papain iodination (with chloramine-T, lactoperoxidase and conjugation with Bolton-Hunter reagent) have been compared. The highest yield of 125 I-papain could be obtained using lactoperoxidase which enabled to achieve the highest immunoreactivity. 125 I-papain, labelled this way, is suitable for the radioimmunoassay of papain. (author)

  18. Impact of different extraction methods on the quality of Dipteryx alata extracts

    Directory of Open Access Journals (Sweden)

    Frederico S. Martins

    2013-05-01

    Full Text Available This study aimed to impact of different extraction methods on the quality of Dipteryx alata Vogel, Fabaceae, extracts from fruits. The major compounds found were the lipids 38.9% (w/w and proteins 26.20% (w/w. The residual moisture was 7.20% (w/w, total fiber 14.50% (w/w, minerals 4.10% (w/w and carbohydrate 9.10 % (w/w. The species studied has great potential in producing oil, but the content and type of fatty acids obtained is dependent on the method of extraction. The Blingh & Dyer method was more selective for unsaturated fatty acids and Shoxlet method was more selective for saturated fatty acids. The tannin extraction by ultrasound (33.70 % w/w was 13.90% more efficient than extraction by decoction (29 % w/w.

  19. Differences in demographic traits of four butterflyfish species between two reefs of the Great Barrier Reef separated by 1,200 km

    KAUST Repository

    Berumen, Michael L.

    2011-11-16

    Many species demonstrate variation in life history attributes in response to gradients in environmental conditions. For fishes, major drivers of life history variation are changes in temperature and food availability. This study examined large-scale variation in the demography of four species of butterflyfishes (Chaetodon citrinellus, Chaetodon lunulatus, Chaetodon melannotus, and Chaetodon trifascialis) between two locations on Australia\\'s Great Barrier Reef (Lizard Island and One Tree Island, separated by approximately 1,200 km). Variation in age-based demographic parameters was assessed using the re-parameterised von Bertalanffy growth function. All species displayed measurable differences in body size between locations, with individuals achieving a larger adult size at the higher latitude site (One Tree Island) for three of the four species examined. Resources and abundances of the study species were also measured, revealing some significant differences between locations. For example, for C. trifascialis, there was no difference in its preferred resource or in abundance between locations, yet it achieved a larger body size at the higher latitude location, suggesting a response to temperature. For some species, resources and abundances did vary between locations, limiting the ability to distinguish between a demographic response to temperature as opposed to a response to food or competition. Future studies of life histories and demographics at large spatial scales will need to consider the potentially confounding roles of temperature, resource usage and availability, and abundance/competition to disentangle the effects of these environmental variables. © 2011 Springer-Verlag.

  20. The mimetic finite difference method for elliptic problems

    CERN Document Server

    Veiga, Lourenço Beirão; Manzini, Gianmarco

    2014-01-01

    This book describes the theoretical and computational aspects of the mimetic finite difference method for a wide class of multidimensional elliptic problems, which includes diffusion, advection-diffusion, Stokes, elasticity, magnetostatics and plate bending problems. The modern mimetic discretization technology developed in part by the Authors allows one to solve these equations on unstructured polygonal, polyhedral and generalized polyhedral meshes. The book provides a practical guide for those scientists and engineers that are interested in the computational properties of the mimetic finite difference method such as the accuracy, stability, robustness, and efficiency. Many examples are provided to help the reader to understand and implement this method. This monograph also provides the essential background material and describes basic mathematical tools required to develop further the mimetic discretization technology and to extend it to various applications.

  1. Phase Difference Measurement Method Based on Progressive Phase Shift

    Directory of Open Access Journals (Sweden)

    Min Zhang

    2018-06-01

    Full Text Available This paper proposes a method for phase difference measurement based on the principle of progressive phase shift (PPS. A phase difference measurement system based on PPS and implemented in the FPGA chip is proposed and tested. In the realized system, a fully programmable delay line (PDL is constructed, which provides accurate and stable delay, benefitting from the feed-back structure of the control module. The control module calibrates the delay according to process, voltage and temperature (PVT variations. Furthermore, a modified method based on double PPS is incorporated to improve the resolution. The obtained resolution is 25 ps. Moreover, to improve the resolution, the proposed method is implemented on the 20 nm Xilinx Kintex Ultrascale platform, and test results indicate that the obtained measurement error and clock synchronization error is within the range of ±5 ps.

  2. Modelling magnetic polarisation J 50 by different methods

    International Nuclear Information System (INIS)

    Yonamine, Taeko; Campos, Marcos F. de; Castro, Nicolau A.; Landgraf, Fernando J.G.

    2006-01-01

    Two different methods for modelling the angular behaviour of magnetic polarisation at 5000 A/m (J 50 ) of electrical steels were evaluated and compared. Both methods are based upon crystallographic texture data. The texture of non-oriented electrical steels with silicon content ranging from 0.11 to 3%Si was determined by X-ray diffraction. In the first method, J 50 was correlated to the calculated value of the average anisotropy energy in each direction, using texture data. In the second method, the first three coefficients of the spherical harmonic series of the ODF and two experimental points were used to estimate the angular variation of J 50 . The first method allows the estimation of J 50 for samples with different textures and Si contents using only the texture data, with no need of magnetic measurement, and this is advantageous, because texture data can be acquired with less than 2 g of material. The second method may give better adjust in some situations but besides the texture data, it requests magnetic measurements in at least two directions, for example, rolling and transverse directions

  3. Impact of Different Obesity Assessment Methods after Acute Coronary Syndromes

    Directory of Open Access Journals (Sweden)

    Caroline N. M. Nunes

    2014-07-01

    Full Text Available Background: Abdominal obesity is an important cardiovascular risk factor. Therefore, identifying the best method for measuring waist circumference (WC is a priority. Objective: To evaluate the eight methods of measuring WC in patients with acute coronary syndrome (ACS as a predictor of cardiovascular complications during hospitalization. Methods: Prospective study of patients with ACS. The measurement of WC was performed by eight known methods: midpoint between the last rib and the iliac crest (1, point of minimum circumference (2; immediately above the iliac crest (3, umbilicus (4, one inch above the umbilicus (5, one centimeter above the umbilicus (6, smallest rib and (7 the point of greatest circumference around the waist (8. Complications included: angina, arrhythmia, heart failure, cardiogenic shock, hypotension, pericarditis and death. Logistic regression tests were used for predictive factors. Results: A total of 55 patients were evaluated. During the hospitalization period, which corresponded on average to seven days, 37 (67% patients had complications, with the exception of death, which was not observed in any of the cases. Of these complications, the only one that was associated with WC was angina, and with every cm of WC increase, the risk for angina increased from 7.5 to 9.9%, depending on the measurement site. It is noteworthy the fact that there was no difference between the different methods of measuring WC as a predictor of angina. Conclusion: The eight methods of measuring WC are also predictors of recurrent angina after acute coronary syndromes.

  4. Comparison of different methods for estimation of potential evapotranspiration

    International Nuclear Information System (INIS)

    Nazeer, M.

    2010-01-01

    Evapotranspiration can be estimated with different available methods. The aim of this research study to compare and evaluate the originally measured potential evapotranspiration from Class A pan with the Hargreaves equation, the Penman equation, the Penman-Montheith equation, and the FAO56 Penman-Monteith equation. The evaporation rate from pan recorded greater than stated methods. For each evapotranspiration method, results were compared against mean monthly potential evapotranspiration (PET) from Pan data according to FAO (ET/sub o/=K/sub pan X E/sub pan)), from daily measured recorded data of the twenty-five years (1984-2008). On the basis of statistical analysis between the pan data and the FAO56- Penman-Monteith method are not considered to be very significant (=0.98) at 95% confidence and prediction intervals. All methods required accurate weather data for precise results, for the purpose of this study the past twenty five years data were analyzed and used including maximum and minimum air temperature, relative humidity, wind speed, sunshine duration and rainfall. Based on linear regression analysis results the FAO56 PMM ranked first (R/sup 2/=0.98) followed by Hergreaves method (R/sup 2/=0.96), Penman-Monteith method (R/sup 2/=0.94) and Penman method (=0.93). Obviously, using FAO56 Penman Monteith method with precise climatic variables for ET/sub o/ estimation is more reliable than the other alternative methods, Hergreaves is more simple and rely only on air temperatures data and can be used alternative of FAO56 Penman-Monteith method if other climatic data are missing or unreliable. (author)

  5. The difference in the thermal conductivity of nanofluids measured by different methods and its rationalization

    Directory of Open Access Journals (Sweden)

    Aparna Zagabathuni

    2016-12-01

    Full Text Available A suspension of particles below 100 nm in size, usually termed as nanofluid, often shows a notable enhancement in thermal conductivity, when measured by the transient hot-wire method. In contrast, when the conductivity of the same nanofluid is measured by the laser flash method, the enhancement reported is about one order of magnitude lower. This difference has been quantitatively resolved for the first time on the basis of the collision-mediated heat transfer model for nanofluids proposed earlier by our research group. Based on the continuum simulation coupled with stochastic analysis, the present theoretical prediction agrees well with the experimental observations from different measuring methods reported in the literature, and fully accounts for the different results from the two measuring methods mentioned above. This analysis also gives an indication that the nanofluids are unlikely to be effective for heat transfer in microchannels.

  6. The difference in the thermal conductivity of nanofluids measured by different methods and its rationalization.

    Science.gov (United States)

    Zagabathuni, Aparna; Ghosh, Sudipto; Pabi, Shyamal Kumar

    2016-01-01

    A suspension of particles below 100 nm in size, usually termed as nanofluid, often shows a notable enhancement in thermal conductivity, when measured by the transient hot-wire method. In contrast, when the conductivity of the same nanofluid is measured by the laser flash method, the enhancement reported is about one order of magnitude lower. This difference has been quantitatively resolved for the first time on the basis of the collision-mediated heat transfer model for nanofluids proposed earlier by our research group. Based on the continuum simulation coupled with stochastic analysis, the present theoretical prediction agrees well with the experimental observations from different measuring methods reported in the literature, and fully accounts for the different results from the two measuring methods mentioned above. This analysis also gives an indication that the nanofluids are unlikely to be effective for heat transfer in microchannels.

  7. Same Content, Different Methods: Comparing Lecture, Engaged Classroom, and Simulation.

    Science.gov (United States)

    Raleigh, Meghan F; Wilson, Garland Anthony; Moss, David Alan; Reineke-Piper, Kristen A; Walden, Jeffrey; Fisher, Daniel J; Williams, Tracy; Alexander, Christienne; Niceler, Brock; Viera, Anthony J; Zakrajsek, Todd

    2018-02-01

    There is a push to use classroom technology and active teaching methods to replace didactic lectures as the most prevalent format for resident education. This multisite collaborative cohort study involving nine residency programs across the United States compared a standard slide-based didactic lecture, a facilitated group discussion via an engaged classroom, and a high-fidelity, hands-on simulation scenario for teaching the topic of acute dyspnea. The primary outcome was knowledge retention at 2 to 4 weeks. Each teaching method was assigned to three different residency programs in the collaborative according to local resources. Learning objectives were determined by faculty. Pre- and posttest questions were validated and utilized as a measurement of knowledge retention. Each site administered the pretest, taught the topic of acute dyspnea utilizing their assigned method, and administered a posttest 2 to 4 weeks later. Differences between the groups were compared using paired t-tests. A total of 146 residents completed the posttest, and scores increased from baseline across all groups. The average score increased 6% in the standard lecture group (n=47), 11% in the engaged classroom (n=53), and 9% in the simulation group (n=56). The differences in improvement between engaged classroom and simulation were not statistically significant. Compared to standard lecture, both engaged classroom and high-fidelity simulation were associated with a statistically significant improvement in knowledge retention. Knowledge retention after engaged classroom and high-fidelity simulation did not significantly differ. More research is necessary to determine if different teaching methods result in different levels of comfort and skill with actual patient care.

  8. Comparison of different methods for shielding design in computed tomography

    International Nuclear Information System (INIS)

    Ciraj-Bjelac, O.; Arandjic, D.; Kosutic, D.

    2011-01-01

    The purpose of this work is to compare different methods for shielding calculation in computed tomography (CT). The BIR-IPEM (British Inst. of Radiology and Inst. of Physics in Engineering in Medicine) and NCRP (National Council on Radiation Protection) method were used for shielding thickness calculation. Scattered dose levels and calculated barrier thickness were also compared with those obtained by scatter dose measurements in the vicinity of a dedicated CT unit. Minimal requirement for protective barriers based on BIR-IPEM method ranged between 1.1 and 1.4 mm of lead demonstrating underestimation of up to 20 % and overestimation of up to 30 % when compared with thicknesses based on measured dose levels. For NCRP method, calculated thicknesses were 33 % higher (27-42 %). BIR-IPEM methodology-based results were comparable with values based on scattered dose measurements, while results obtained using NCRP methodology demonstrated an overestimation of the minimal required barrier thickness. (authors)

  9. Evaluation of different flamelet tabulation methods for laminar spray combustion

    Science.gov (United States)

    Luo, Yujuan; Wen, Xu; Wang, Haiou; Luo, Kun; Fan, Jianren

    2018-05-01

    In this work, three different flamelet tabulation methods for spray combustion are evaluated. Major differences among these methods lie in the treatment of the temperature boundary conditions of the flamelet equations. Particularly, in the first tabulation method ("M1"), both the fuel and oxidizer temperature boundary conditions are set to be fixed. In the second tabulation method ("M2"), the fuel temperature boundary condition is varied while the oxidizer temperature boundary condition is fixed. In the third tabulation method ("M3"), both the fuel and oxidizer temperature boundary conditions are varied and set to be equal. The focus of this work is to investigate whether the heat transfer between the droplet phase and gas phase can be represented by the studied tabulation methods through a priori analyses. To this end, spray flames stabilized in a three-dimensional counterflow are first simulated with detailed chemistry. Then, the trajectory variables are calculated from the detailed chemistry solutions. Finally, the tabulated thermo-chemical quantities are compared to the corresponding values from the detailed chemistry solutions. The comparisons show that the gas temperature cannot be predicted by "M1" with only a mixture fraction and reaction progress variable being the trajectory variables. The gas temperature can be correctly predicted by both "M2" and "M3," in which the total enthalpy is introduced as an additional manifold. In "M2," variations of the oxidizer temperature are considered with a temperature modification technique, which is not required in "M3." Interestingly, it is found that the mass fractions of the reactants and major products are not sensitive to the representation of the interphase heat transfer in the flamelet chemtables, and they can be correctly predicted by all tabulation methods. By contrast, the intermediate species CO and H2 in the premixed flame reaction zone are over-predicted by all tabulation methods.

  10. Reduction of aflatoxin in rice by different cooking methods.

    Science.gov (United States)

    Sani, Ali Mohamadi; Azizi, Eisa Gholampour; Salehi, Esmaeel Ataye; Rahimi, Khadije

    2014-07-01

    Rice (Oryza sativa Linn) is one of the basic diets in the north of Iran. The aim of present study was to detect total aflatoxin (AFT) in domestic and imported rice in Amol (in the north of Iran) and to evaluate the effect of different cooking methods on the levels of the toxin. For this purpose, 42 rice samples were collected from retail stores. The raw samples were analysed by enzyme-linked immunosorbent assay (ELISA) technique for toxin assessment and then submitted to two different cooking methods including traditional local method and in rice cooker. After treatment, AFT was determined. Results show that the average concentration of AFT in domestic and imported samples was 1.08 ± 0.02 and 1.89 ± 0.87 ppb, respectively, which is lower than national and European Union standards. The highest AFT reduction (24.8%) was observed when rice samples were cooked by rice cooker but the difference with local method was not statistically significant (p > 0.05). © The Author(s) 2012.

  11. Impact of Different Obesity Assessment Methods after Acute Coronary Syndromes

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Caroline N. M.; Minicucci, Marcos F.; Farah, Elaine; Fusco, Daniéliso; Azevedo, Paula S.; Paiva, Sergio A. R.; Zornoff, Leonardo A. M., E-mail: lzornoff@cardiol.br [Faculdade de Medicina de Botucatu, Botucatu, SP (Brazil)

    2014-07-15

    Abdominal obesity is an important cardiovascular risk factor. Therefore, identifying the best method for measuring waist circumference (WC) is a priority. To evaluate the eight methods of measuring WC in patients with acute coronary syndrome (ACS) as a predictor of cardiovascular complications during hospitalization. Prospective study of patients with ACS. The measurement of WC was performed by eight known methods: midpoint between the last rib and the iliac crest (1), point of minimum circumference (2); immediately above the iliac crest (3), umbilicus (4), one inch above the umbilicus (5), one centimeter above the umbilicus (6), smallest rib and (7) the point of greatest circumference around the waist (8). Complications included: angina, arrhythmia, heart failure, cardiogenic shock, hypotension, pericarditis and death. Logistic regression tests were used for predictive factors. A total of 55 patients were evaluated. During the hospitalization period, which corresponded on average to seven days, 37 (67%) patients had complications, with the exception of death, which was not observed in any of the cases. Of these complications, the only one that was associated with WC was angina, and with every cm of WC increase, the risk for angina increased from 7.5 to 9.9%, depending on the measurement site. It is noteworthy the fact that there was no difference between the different methods of measuring WC as a predictor of angina. The eight methods of measuring WC are also predictors of recurrent angina after acute coronary syndromes.

  12. Impact of Different Obesity Assessment Methods after Acute Coronary Syndromes

    International Nuclear Information System (INIS)

    Nunes, Caroline N. M.; Minicucci, Marcos F.; Farah, Elaine; Fusco, Daniéliso; Azevedo, Paula S.; Paiva, Sergio A. R.; Zornoff, Leonardo A. M.

    2014-01-01

    Abdominal obesity is an important cardiovascular risk factor. Therefore, identifying the best method for measuring waist circumference (WC) is a priority. To evaluate the eight methods of measuring WC in patients with acute coronary syndrome (ACS) as a predictor of cardiovascular complications during hospitalization. Prospective study of patients with ACS. The measurement of WC was performed by eight known methods: midpoint between the last rib and the iliac crest (1), point of minimum circumference (2); immediately above the iliac crest (3), umbilicus (4), one inch above the umbilicus (5), one centimeter above the umbilicus (6), smallest rib and (7) the point of greatest circumference around the waist (8). Complications included: angina, arrhythmia, heart failure, cardiogenic shock, hypotension, pericarditis and death. Logistic regression tests were used for predictive factors. A total of 55 patients were evaluated. During the hospitalization period, which corresponded on average to seven days, 37 (67%) patients had complications, with the exception of death, which was not observed in any of the cases. Of these complications, the only one that was associated with WC was angina, and with every cm of WC increase, the risk for angina increased from 7.5 to 9.9%, depending on the measurement site. It is noteworthy the fact that there was no difference between the different methods of measuring WC as a predictor of angina. The eight methods of measuring WC are also predictors of recurrent angina after acute coronary syndromes

  13. Green's function matching method for adjoining regions having different masses

    International Nuclear Information System (INIS)

    Morgenstern Horing, Norman J

    2006-01-01

    We present a primer on the method of Green's function matching for the determination of the global Schroedinger Green's function for all space subject to joining conditions at an interface between two (or more) separate parts of the region having different masses. The object of this technique is to determine the full space Schroedinger Green's function in terms of the individual Green's functions of the constituent parts taken as if they were themselves extended to all space. This analytical method has had successful applications in the theory of surface states, and remains of interest for nanostructures

  14. Modification of low-density lipoprotein by different radioiodination methods

    International Nuclear Information System (INIS)

    Sobal, G.; Resch, U.; Sinzinger, H.

    2004-01-01

    Scintigraphic imaging of radiolabeled low-density lipoproteins (LDL) is an interesting tool for the understanding of its role in pathomechanism of atherosclerosis. Metabolism of native LDL shows quite different pattern and kinetics as compared to that of modified LDL which is not mediated by classical LDL-receptor and accumulates in atherosclerotic lesions to form lipid-laden foam cells. Therefore we were interested whether radiolabelling of LDL induces structural modifications. We performed the iodine labeling of LDL for scintigraphic imaging of atherosclerosis by three different methods: chloramine-T (A), iodine monochloride (B) and iodogen (C). The highest radiolabelling yield of 125 I was obtained by the iodogen method (75.44±13.52%) and the lowest (49.01±12.74%) by iodine monochloride. Chloramine T showed a labeling yield of 62.82±6.17%. The stability of the tracer was very high with all the methods, persisting up to 6 h (98.83±1.2% - 91.38±4.7%, 15 min vs 6 h after labeling). For the first time we not only investigated the influence of radiolabelling on relative electrophoretic mobility (REM), but also various oxidation parameters such as baseline dienes (BD), thiobarbituric acid reactive substances (TBARS), endogenous peroxides (POX) and oxidation resistance in the copper-mediated oxidation system (expressed as lag-time) were measured. Furthermore, oxidation- derived fragmentation of the lipoproteins was examined with SDS-PAGE electrophoresis. Data are expressed as % change compared to native LDL before radiolabeling. BD were reduced by 32% using the method (A), but increased by 33% and 47% with the monochloride (B) and iodogen method (C), respectively. The effect on lag-time was comparable for all the three methods, ranging from 25 to 36% reduction in lag-time. TBARS were strongly increased 5-7 fold by all the methods. REM was changed by all three methods. While by methods A and C we have found a moderate increase in REM by 1.75 and 2.0 fold

  15. Error assessment in recombinant baculovirus titration: evaluation of different methods.

    Science.gov (United States)

    Roldão, António; Oliveira, Rui; Carrondo, Manuel J T; Alves, Paula M

    2009-07-01

    The success of baculovirus/insect cells system in heterologous protein expression depends on the robustness and efficiency of the production workflow. It is essential that process parameters are controlled and include as little variability as possible. The multiplicity of infection (MOI) is the most critical factor since irreproducible MOIs caused by inaccurate estimation of viral titers hinder batch consistency and process optimization. This lack of accuracy is related to intrinsic characteristics of the method such as the inability to distinguish between infectious and non-infectious baculovirus. In this study, several methods for baculovirus titration were compared. The most critical issues identified were the incubation time and cell concentration at the time of infection. These variables influence strongly the accuracy of titers and must be defined for optimal performance of the titration method. Although the standard errors of the methods varied significantly (7-36%), titers were within the same order of magnitude; thus, viral titers can be considered independent of the method of titration. A cost analysis of the baculovirus titration methods used in this study showed that the alamarblue, real time Q-PCR and plaque assays were the most expensive techniques. The remaining methods cost on average 75% less than the former methods. Based on the cost, time and error analysis undertaken in this study, the end-point dilution assay, microculture tetrazolium assay and flow cytometric assay were found to be the techniques that combine all these three main factors better. Nevertheless, it is always recommended to confirm the accuracy of the titration either by comparison with a well characterized baculovirus reference stock or by titration using two different methods and verification of the variability of results.

  16. Hybrid finite difference/finite element immersed boundary method.

    Science.gov (United States)

    E Griffith, Boyce; Luo, Xiaoyu

    2017-12-01

    The immersed boundary method is an approach to fluid-structure interaction that uses a Lagrangian description of the structural deformations, stresses, and forces along with an Eulerian description of the momentum, viscosity, and incompressibility of the fluid-structure system. The original immersed boundary methods described immersed elastic structures using systems of flexible fibers, and even now, most immersed boundary methods still require Lagrangian meshes that are finer than the Eulerian grid. This work introduces a coupling scheme for the immersed boundary method to link the Lagrangian and Eulerian variables that facilitates independent spatial discretizations for the structure and background grid. This approach uses a finite element discretization of the structure while retaining a finite difference scheme for the Eulerian variables. We apply this method to benchmark problems involving elastic, rigid, and actively contracting structures, including an idealized model of the left ventricle of the heart. Our tests include cases in which, for a fixed Eulerian grid spacing, coarser Lagrangian structural meshes yield discretization errors that are as much as several orders of magnitude smaller than errors obtained using finer structural meshes. The Lagrangian-Eulerian coupling approach developed in this work enables the effective use of these coarse structural meshes with the immersed boundary method. This work also contrasts two different weak forms of the equations, one of which is demonstrated to be more effective for the coarse structural discretizations facilitated by our coupling approach. © 2017 The Authors International  Journal  for  Numerical  Methods  in  Biomedical  Engineering Published by John Wiley & Sons Ltd.

  17. Comparative Study of Different Processing Methods for the ...

    African Journals Online (AJOL)

    MBI

    2014-06-07

    Jun 7, 2014 ... production of food energy, year-round availability and tolerance to stress condition (Hahn and Keyser,. 1985). Cassava is a major source of ... compounds releases hydrocyanic acid (HCN) which is of great concern for human ...

  18. Different types of anastomotic methods: a review of literature

    Directory of Open Access Journals (Sweden)

    Shadi Mooloughi

    2015-09-01

    Full Text Available Constructing successful anastomosis is an important concept in gastrointestinal tract surgeries, which can be affected by various factors such as preoperative bowel condition, intra- and postoperative complications, bleeding and the device characteristics. Suturing, stapling and compression anastomosis are different techniques. Despite the invention of compression anastomosis, which goes back almost two centuries, this method has not obtained the popularity of the suturing and stapling anastomosis and further studies are required. Designing methods and devices with no drawbacks might reduce the complications associated with anastomosis as the alternative to suturing and stapling anastomoses. Several materials can be used as reinforcement materials, which can improve the consequences of the stapled anastomosis. In addition to reinforcement materials, other forms of supports have been proposed, which might be capable of reducing the postoperative complications of anastomosis. In this study, we briefly review various types of anastomotic techniques and associated complications in different types of gastrointestinal surgeries.

  19. Temperature Calculation of Annular Fuel Pellet by Finite Difference Method

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yong Sik; Bang, Je Geon; Kim, Dae Ho; Kim, Sun Ki; Lim, Ik Sung; Song, Kun Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    KAERI has started an innovative fuel development project for applying dual-cooled annular fuel to existing PWR reactor. In fuel design, fuel temperature is the most important factor which can affect nuclear fuel integrity and safety. Many models and methodologies, which can calculate temperature distribution in a fuel pellet have been proposed. However, due to the geometrical characteristics and cooling condition differences between existing solid type fuel and dual-cooled annular fuel, current fuel temperature calculation models can not be applied directly. Therefore, the new heat conduction model of fuel pellet was established. In general, fuel pellet temperature is calculated by FDM(Finite Difference Method) or FEM(Finite Element Method), because, temperature dependency of fuel thermal conductivity and spatial dependency heat generation in the pellet due to the self-shielding should be considered. In our study, FDM is adopted due to high exactness and short calculation time.

  20. Evaluation of Different Methods for Soil Classifications by Using Geographic Information Systems and Remote Sensing

    Directory of Open Access Journals (Sweden)

    S. H Sanaeinejad

    2012-12-01

    Full Text Available Soil salinity is an important factor that affects plant growth and reduces production of plantat different growth stages Remote sensing technology and GIS have a great potential for monitoring dynamic soil processes such as salinity. In the present study the efficiency of remote sensing technology and its integration with GIS was examined to estimate soil salinity for Neyshabour basin. Different classification methods for soil salinity were also investigated. We used 6 bands of LandSat ETM+ for this study. Classification results obtained from applying mathematical models for the images were compared with different band combinations results. The area of saline and non saline soil classes were identified in the study area based on the both methods and also based on the combination of the two methods. The results showed that the best method for soil classification was using of the two methods in the first stage to separate two classes of saline and non saline soils and then classifying the non saline soils in the second stage. As the variation in the numerical values of the image for different soil salinity in the study area was small, it was concluded that there is a limit potential of LandSat ETM+ images for identifying and classification of soil salinity in such an area.

  1. Correlations between different methods of UO2 pellet density measurement

    International Nuclear Information System (INIS)

    Yanagisawa, Kazuaki

    1977-07-01

    Density of UO 2 pellets was measured by three different methods, i.e., geometrical, water-immersed and meta-xylene immersed and treated statistically, to find out the correlations between UO 2 pellets are of six kinds but with same specifications. The correlations are linear 1 : 1 for pellets of 95% theoretical densities and above, but such do not exist below the level and variated statistically due to interaction between open and close pores. (auth.)

  2. Unconditionally stable difference methods for delay partial differential equations

    OpenAIRE

    Huang, Chengming; Vandewalle, Stefan

    2012-01-01

    This paper is concerned with the numerical solution of parabolic partial differential equations with time-delay. We focus in particular on the delay dependent stability analysis of difference methods that use a non-constrained mesh, i.e., the time step-size is not required to be a submultiple of the delay. We prove that the fully discrete system unconditionally preserves the delay dependent asymptotic stability of the linear test problem under consideration, when the following discretizati...

  3. Computational electrodynamics the finite-difference time-domain method

    CERN Document Server

    Taflove, Allen

    2005-01-01

    This extensively revised and expanded third edition of the Artech House bestseller, Computational Electrodynamics: The Finite-Difference Time-Domain Method, offers engineers the most up-to-date and definitive resource on this critical method for solving Maxwell's equations. The method helps practitioners design antennas, wireless communications devices, high-speed digital and microwave circuits, and integrated optical devices with unsurpassed efficiency. There has been considerable advancement in FDTD computational technology over the past few years, and the third edition brings professionals the very latest details with entirely new chapters on important techniques, major updates on key topics, and new discussions on emerging areas such as nanophotonics. What's more, to supplement the third edition, the authors have created a Web site with solutions to problems, downloadable graphics and videos, and updates, making this new edition the ideal textbook on the subject as well.

  4. Face recognition by combining eigenface method with different wavelet subbands

    Institute of Scientific and Technical Information of China (English)

    MA Yan; LI Shun-bao

    2006-01-01

    @@ A method combining eigenface with different wavelet subbands for face recognition is proposed.Each training image is decomposed into multi-subbands for extracting their eigenvector sets and projection vectors.In the recognition process,the inner product distance between the projection vectors of the test image and that of the training image are calculated.The training image,corresponding to the maximum distance under the given threshold condition,is considered as the final result.The experimental results on the ORL and YALE face database show that,compared with the eigenface method directly on the image domain or on a single wavelet subband,the recognition accuracy using the proposed method is improved by 5% without influencing the recognition speed.

  5. τ lifetime with the impact parameter difference method

    International Nuclear Information System (INIS)

    Andreazza, A.

    1995-01-01

    The impact parameter difference method for measuring the τ lifetime has been used since 1990 in the ALEPH and DELPHI collaborations at LEP. This paper is mainly devoted to the description of the method. The most recent preliminary results, τ τ =288.1±5.4(stat.)±1.2(syst.)fs obtained by the ALEPH collaboration on 1992 data and τ τ =292.8±5.0(stat.)±3.7(syst.)fs from the combined DELPHI analysis of 1992-93 data, are still statistically limited, therefore a global error on the τ lifetime of less than 1% per experiment should be attainable with this method at the end of LEP-1 running. ((orig.))

  6. Long term performance of different radon remedial methods in Sweden

    CERN Document Server

    Clavensjoe, B

    2002-01-01

    The object of this project was to investigate the long time effectiveness of different radon remedial methods. The ten years project started 1991. From start the investigation comprised of 105 dwellings (91 single-family houses and 14 flats in multi-family buildings). In all of the dwellings remedial measures were carried out in the eighties. Before and immediately after the reduction the local measured the radon concentrations. New measurements of the radon concentrations have been made every third year; in 1991, 1994, 1997 and in 2000. Twelve different radon remedial methods and method combinations were used. The radon sources were building materials as well as sub-soils. In all of the dwellings the radon concentrations were measured by nuclear track films during 3 months (January-March) measurements and in half of them the air change rates by passive tracer gas methods. The results of the 2000 and the 1991 (within brackets) studies showed that the radon concentration was up to 200 Bq/m sup 3 in 54 (54) sin...

  7. Comparing different methods for estimating radiation dose to the conceptus

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Rendon, X.; Dedulle, A. [KU Leuven, Department of Imaging and Pathology, Division of Medical Physics and Quality Assessment, Herestraat 49, box 7003, Leuven (Belgium); Walgraeve, M.S.; Woussen, S.; Zhang, G. [University Hospitals Leuven, Department of Radiology, Leuven (Belgium); Bosmans, H. [KU Leuven, Department of Imaging and Pathology, Division of Medical Physics and Quality Assessment, Herestraat 49, box 7003, Leuven (Belgium); University Hospitals Leuven, Department of Radiology, Leuven (Belgium); Zanca, F. [KU Leuven, Department of Imaging and Pathology, Division of Medical Physics and Quality Assessment, Herestraat 49, box 7003, Leuven (Belgium); GE Healthcare, Buc (France)

    2017-02-15

    To compare different methods available in the literature for estimating radiation dose to the conceptus (D{sub conceptus}) against a patient-specific Monte Carlo (MC) simulation and a commercial software package (CSP). Eight voxel models from abdominopelvic CT exams of pregnant patients were generated. D{sub conceptus} was calculated with an MC framework including patient-specific longitudinal tube current modulation (TCM). For the same patients, dose to the uterus, D{sub uterus}, was calculated as an alternative for D{sub conceptus}, with a CSP that uses a standard-size, non-pregnant phantom and a generic TCM curve. The percentage error between D{sub uterus} and D{sub conceptus} was studied. Dose to the conceptus and percent error with respect to D{sub conceptus} was also estimated for three methods in the literature. The percentage error ranged from -15.9% to 40.0% when comparing MC to CSP. When comparing the TCM profiles with the generic TCM profile from the CSP, differences were observed due to patient habitus and conceptus position. For the other methods, the percentage error ranged from -30.1% to 13.5% but applicability was limited. Estimating an accurate D{sub conceptus} requires a patient-specific approach that the CSP investigated cannot provide. Available methods in the literature can provide a better estimation if applicable to patient-specific cases. (orig.)

  8. Some Orchid Species Fungi Isolated by Different Methods

    Directory of Open Access Journals (Sweden)

    Arzu ÇIĞ

    2014-03-01

    Full Text Available Due to their very small seeds that do not contain endosperm, many terrestrial orchid species require the presence of fungi in order to germinate and maintain their lives; and symbiotic culture studies are being carried out on this topic. For the purpose of determining the orchid species on which the fungus to be used as inoculants in the symbiotic culture will be effective, fungi isolated through several isolation methods are cultured with orchid species. In this study a total of four different isolation methods were applied as one on the tubers and rhizomes and three on the soil of eleven orchid species from the Anacamptis, Cephalanthera, Dactylorhiza and Orchis genera. Three different culture media were used in the methods. At the end of the study Alternaria, Aspergillus, Fusarium, Macrophomina, Rhizoctonia, Trichoderma and Verticillium fungi were isolated. In the study that was conducted with the aimed to isolate particularly Rhizoctania spp. fungi, the fungi was isolated from the tubers of Dactylorhiza umbrosa and Orchis palustris species and the soil of the Orchis simia species. Fusarium and Aspergillus species were isolated the most in all implemented methods and from all species.

  9. The influence of different black carbon and sulfate mixing methods on their optical and radiative properties

    International Nuclear Information System (INIS)

    Zhang, Hua; Zhou, Chen; Wang, Zhili; Zhao, Shuyun; Li, Jiangnan

    2015-01-01

    methods are compared. • The factors affecting the optical properties are investigated in detail. • Great differences exist among different mixing methods in radiative calculations

  10. Glucose determination in fish plasma by two different moderate methods

    Directory of Open Access Journals (Sweden)

    Jana Bartoňková

    2016-01-01

    Full Text Available Teleost fish include many different species, having a large economic and environmental impact. Glucose is a key source of energy for most vertebrate organisms. Fish as well as mammals maintain a specific level of blood sugar – glycaemia, which is influenced by multiple factors such as hormone production, diet, and temperature. Therefore, it is a useful indicator for scientists who need to check the immediate state of an organism. The most frequently used method of measuring glycaemia in farmed fish is spectrophotometry; however, this method is often inconvenient for field experiments. Here we report that basic spectrophotometry using oxidation of blood beta D-glucose by glucose oxidase (used in laboratory conditions can be easily substituted with portable glucometer measurements, primarily designed for human samples. The possibility of use outside the laboratory and its small sample volume demands make this method very useful. Field studies often require fast sample processing and conditions of measurement are limited. Using the glucometer is a simple and elegant option. We tested 74 blood plasma samples (29 males, 45 females of tench (Tinca tinca both spectrophotometrically and using the human glucometer. Our results show a significant linear correlation (P < 0.001 between both methods. The main contribution of this study consists in comparability and interchangeability of results obtained from both presented methods.

  11. The GREAT3 challenge

    International Nuclear Information System (INIS)

    Miyatake, H; Mandelbaum, R; Rowe, B

    2014-01-01

    The GRavitational lEnsing Accuracy Testing 3 (GREAT3) challenge is an image analysis competition that aims to test algorithms to measure weak gravitational lensing from astronomical images. The challenge started in October 2013 and ends 30 April 2014. The challenge focuses on testing the impact on weak lensing measurements of realistically complex galaxy morphologies, realistic point spread function, and combination of multiple different exposures. It includes simulated ground- and space-based data. The details of the challenge are described in [1], and the challenge website and its leader board can be found at http://great3challenge.info and http://great3.projects.phys.ucl.ac.uk/leaderboard/, respectively

  12. Different methods for calculation of LVEF: which is right?

    International Nuclear Information System (INIS)

    Blair, E.; McLean, R.; Dixson, H.

    1999-01-01

    Full text: Before the introduction of quantitative gated SPET (QGS) software, our routine method of determining left ventricular ejection fraction (LVEF) was the manual processing of gated heart pool studies (GHPS). The purpose of this preliminary study was to evaluate four methods of LVEF determination available in our private practice. We compared the LVEF obtained from manual GHPS (mGHPS) with that from automated GHPS (aGHPS), and that from both manual and automated QGS (mQGS and aQGS respectively) in 20 patients with a mean age of 63.5 years. All studies were analysed using standard ADAC computers and proprietary software. Two observers were used to determine mGHPS and mQGS, and the results were analysed using linear regression, Bland-Altman plots and visual analysis. The values determined by the two observers for the mGHPS and mQGS differed by an average of 1.15% and - 0.35% respectively and were strongly correlated (r = 0.95 and 0.94). For the automatic processing protocols (aGHPS and aQGS), there was a mean difference of 1.00% and a correlation of r = 0.63. The differences between mGHPS and aGHPS were greater than the differences between mQGS and aQGS. Comparing Observer 1's mGHPS and mQGS, a mean difference of 12.4% (range 2% to 24%), r=0.75. Comparing Observer 2's GHPS and QGS, a mean difference of 11.0% (range -11% to 22%), r = 0.66. Comparing the average mGHPS to aGHPS, a mean difference of 2.4% (range -8.5% to 12%), r = 0.88. Comparing the average mQGS to aQGS, a mean difference of -10.5% (range -18.5% to -5%), r = 0.96. From this study, we have found that the LVEF by mGHPS is substantially higher than mQGS, aGHPS and aQGS. Further investigation with a larger sample and different camera systems is needed

  13. [Black carbon content and distribution in different particle size fractions of forest soils in the middle part of Great Xing'an Mountains, China.

    Science.gov (United States)

    Xu, Jia Hui; Gao, Lei; Cui, Xiao Yang

    2017-10-01

    Soil black carbon (BC) is considered to be the main component of passive C pool because of its inherent biochemical recalcitrance. In this paper, soil BC in the middle part of Great Xing'an Mountains was quantified, the distribution of BC in different particle size fractions was analyzed, and BC stabilization mechanism and its important role in soil C pool were discussed. The results showed that BC expressed obvious accumulation in surface soil, accounting for about 68.7% in the whole horizon (64 cm), and then decreased with the increasing soil depth, however, BC/OC showed an opposite pattern. Climate conditions redistributed BC in study area, and the soil under cooler and moister conditions would sequester more BC. BC proportion in different particle size fractions was in the order of clay>silt>fine sand>coarse sand. Although BC content in clay was the highest and was enhanced with increasing soil depth, BC/OC in clay did not show a marked change. Thus, the rise of BC/OC was attributed to the preservation of BC particles in the fine sand and silt fractions. Biochemical recalcitrance was the main stabilization mechanism for surface BC, and with the increasing soil depth, the chemical protection from clay mineral gradually played a predominant role. BC not only was the essential component of soil stable carbon pool, but also took up a sizable proportion in particulate organic carbon pool. Therefore, the storage of soil stable carbon and the potential of soil carbon sequestration would be enhanced owing to the existence of BC.

  14. Using different methods to assess the discomfort during car driving.

    Science.gov (United States)

    Ravnik, David; Otáhal, Stanislav; Dodic Fikfak, Metoda

    2008-03-01

    This study investigated the discomfort caused by car driving. Discomfort estimates were achieved by self-administered questionnaire, measured by different testing methods, and through the goniometry of principal angles. Data from a total of 200 non-professional drivers who fulfilled the questionnaire was analysed. 118 subjects were analysed by goniometry and 30 drivers were assessed using the OWAS (Ovaco orking Posture Analysis), RULA (Rapid Upper Limb Assessment), and CORLETT tests. The aim of this paper was to assess the appearance of the discomfort and to find some correlations between drivers' postures. Results suggest that different levels of discomfort are perceived in different body regions when driving cars. Differences appear mostly between the genders concerning the discomfort. With the questionnaire and the different estimation techniques, it is possible to identify 'at risk' drivers and ensure urgent attention when necessary. It can be concluded that the questionnare and the CORLETT test are good in predicting location of discomfort. TheB org CRI10scale is good indicator of the level of the discomfort, while OWAS and RULA can appraise the body posture to predict discomfort appearance. According to the goniometry data, the drivers posture could be one of the contributing factors in appearing of discomfort.

  15. [Influence of different original processing methods on quality of Salvia Miltiorrhizae Radix et Rhizoma from Shandong].

    Science.gov (United States)

    Zhao, Zhi-Gang; Gao, Shu-Rui; Hou, Jun-Ling; Wang, Wen-Quan; Xu, Zhen-Guang; Song, Yan; Zhang, Xian-Ming; Li, Jun

    2014-04-01

    In this paper the contents of rosmarinic acid, salvianolic acid B, crytotanshinone, tanshinone II(A) in samples of different original processed Salvia Miltiorrhizae Radix et Rhizoma were determined by HPLC. Different processing methods have varied influences on four active ingredients in Salvia Miltiorrhizae Radix et Rhizoma. Sun-drying reduced the content of crytotanshinone, tanshi-none II(A) and rosmarinic acid, integralsamples were better than those cut into segments. Oven dry method had great influence on water--soluble ingredients, high temperature (80-100 degrees C) could easily cause big loss of rosmarinic acid and salvianolic acid B. The role of traditional processing method "fahan: was complicated, the content of rosmarinic acid decreased, crytotanshinone and tanshinone II(A) increased, and salvianolic acid B showed no difference after "fahan". Drying in the shade and oven dry under low temperatrure (40-60 degrees C) were all effective to keep active ingredients of Salvia Miltiorrhizae Radix et Rhizoma, and, there was no difference between integral samples and samples cut into segments. Therefore, considering comprehensively the content of active ingredients in Salvia Miltiorrhizae Radix et Rhizoma, and processing costing etc., shade-drying or oven dry underlow temperature (40-60 degrees C) should be the most suitable original processing method.

  16. Quantitative assessment of breast density: comparison of different methods

    International Nuclear Information System (INIS)

    Qin Naishan; Guo Li; Dang Yi; Song Luxin; Wang Xiaoying

    2011-01-01

    Objective: To Compare different methods of quantitative breast density measurement. Methods: The study included sixty patients who underwent both mammography and breast MRI. The breast density was computed automatically on digital mammograms with R2 workstation, Two experienced radiologists read the mammograms and assessed the breast density with Wolfe and ACR classification respectively. Fuzzy C-means clustering algorithm (FCM) was used to assess breast density on MRI. Each assessment method was repeated after 2 weeks. Spearman and Pearson correlations of inter- and intrareader and intermodality were computed for density estimates. Results: Inter- and intrareader correlation of Wolfe classification were 0.74 and 0.65, and they were 0.74 and 0.82 for ACR classification respectively. Correlation between Wolfe and ACR classification was 0.77. High interreader correlation of 0.98 and intrareader correlation of 0.96 was observed with MR FCM measurement. And the correlation between digital mammograms and MRI was high in the assessment of breast density (r=0.81, P<0.01). Conclusion: High correlation of breast density estimates on digital mammograms and MRI FCM suggested the former could be used as a simple and accurate method. (authors)

  17. Comparative analysis of different methods for image enhancement

    Institute of Scientific and Technical Information of China (English)

    吴笑峰; 胡仕刚; 赵瑾; 李志明; 李劲; 唐志军; 席在芳

    2014-01-01

    Image enhancement technology plays a very important role to improve image quality in image processing. By enhancing some information and restraining other information selectively, it can improve image visual effect. The objective of this work is to implement the image enhancement to gray scale images using different techniques. After the fundamental methods of image enhancement processing are demonstrated, image enhancement algorithms based on space and frequency domains are systematically investigated and compared. The advantage and defect of the above-mentioned algorithms are analyzed. The algorithms of wavelet based image enhancement are also deduced and generalized. Wavelet transform modulus maxima (WTMM) is a method for detecting the fractal dimension of a signal, it is well used for image enhancement. The image techniques are compared by using the mean (μ), standard deviation (s), mean square error (MSE) and PSNR (peak signal to noise ratio). A group of experimental results demonstrate that the image enhancement algorithm based on wavelet transform is effective for image de-noising and enhancement. Wavelet transform modulus maxima method is one of the best methods for image enhancement.

  18. Comparison Of Different Methods For The Swimming Aerobic Capacity Evaluation.

    Science.gov (United States)

    Pelarigo, Jailton Gregório; Fernandes, Ricardo Jorge; Ribeiro, João; Denadai, Benedito Sérgio; Greco, Camila Coelho; Vilas-Boas, João Paulo

    2017-02-23

    This study compared velocity (v) and bioenergetical factors using different methods applied for the swimming aerobic capacity evaluation. Ten elite female swimmers (17.6 ± 1.9 yrs., 1.70 ± 0.05 m and 61.3 ± 5.8 kg) performed an intermittent incremental velocity protocol until voluntary exhaustion to determine the v associated to the individual anaerobic threshold (IAnT), ventilatory threshold (VT), heart rate threshold (HRT), lactate threshold fixed in 3.5 mmol.L (LT3.5) and maximal oxygen uptake (V[Combining Dot Above]O2max). Two-to-three 30 min submaximal constant tests for the v assessment at maximal lactate steady state (MLSS). The v, gas exchange, heart rate and blood lactate concentration variables were monitored in all tests. The values of all parameters at the v corresponding to MLSS, IAnT, VT and HRT were similar (p 0.400), except for carbon dioxide (V[Combining Dot Above]CO2) that was higher for MLSS compared to VT (p higher when compared to other methods for v and bioenergetical factors. It is suggested that IAnT, VT and HRT methods are better predictors of the intensity corresponding to the commonly accepted gold-standard method (i.e. MLSS) for the aerobic capacity evaluation compared to LT3.5.

  19. A comparative study of three different gene expression analysis methods.

    Science.gov (United States)

    Choe, Jae Young; Han, Hyung Soo; Lee, Seon Duk; Lee, Hanna; Lee, Dong Eun; Ahn, Jae Yun; Ryoo, Hyun Wook; Seo, Kang Suk; Kim, Jong Kun

    2017-12-04

    TNF-α regulates immune cells and acts as an endogenous pyrogen. Reverse transcription polymerase chain reaction (RT-PCR) is one of the most commonly used methods for gene expression analysis. Among the alternatives to PCR, loop-mediated isothermal amplification (LAMP) shows good potential in terms of specificity and sensitivity. However, few studies have compared RT-PCR and LAMP for human gene expression analysis. Therefore, in the present study, we compared one-step RT-PCR, two-step RT-LAMP and one-step RT-LAMP for human gene expression analysis. We compared three gene expression analysis methods using the human TNF-α gene as a biomarker from peripheral blood cells. Total RNA from the three selected febrile patients were subjected to the three different methods of gene expression analysis. In the comparison of three gene expression analysis methods, the detection limit of both one-step RT-PCR and one-step RT-LAMP were the same, while that of two-step RT-LAMP was inferior. One-step RT-LAMP takes less time, and the experimental result is easy to determine. One-step RT-LAMP is a potentially useful and complementary tool that is fast and reasonably sensitive. In addition, one-step RT-LAMP could be useful in environments lacking specialized equipment or expertise.

  20. Acute effect of different stretching methods on isometric muscle strength

    Directory of Open Access Journals (Sweden)

    Gabriel Vasconcellos de Lima Costa e Silva

    2014-03-01

    This study investigated the acute effect of static stretching methods (SS and proprioceptive neuromuscular facilitation (PNF on the static muscle strength (SMS. Eleven young male subjects with strength training experience, performed 3 tests with a 48h interval between them, randomly selected, where each one subject carried out all procedures: a hand grip without stretching; b hand grip preceded by static stretching of wrist flexors muscles; c hand grip preceded by PNF stretching of wrist flexors muscles. The Shapiro-Wilk test verified the normality of data, and a one-way ANOVA with repeated measures, followed by Tukey’s post hoc test, evaluated the differences between the groups. The significance was set at p 0.05. In conclusion, both stretching methods had caused negative effects on isometric strength, reducing its levels.

  1. COMPARATIVE EFFECTIVENESS OF DIFFERENT METHODS OF CANDIDAL DYSBACTERIOSIS THERAPY

    Directory of Open Access Journals (Sweden)

    S.V. Nikolaeva

    2009-01-01

    Full Text Available The study of effectiveness of different methods of microbiological disorders correction in children after 3 years old with candidal dysbacteriosis are presented in this article. The study compared probiotical sour milk-made stuff («Actimel» and sour milk-made stuff, not fortified with probiotical cultures («Rastishka» and traditional kefir. It was shown that an inclusion of probiotical sour milkmade stuff in diet of children with candidal dysbacteriosis results in normalization of lacto- and bifidobacteria level and decreasing of Candida level.Key words: children, candidal dysbacteriosis, probiotics.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2009;8(6:31-35

  2. Modeling of NiTiHf using finite difference method

    Science.gov (United States)

    Farjam, Nazanin; Mehrabi, Reza; Karaca, Haluk; Mirzaeifar, Reza; Elahinia, Mohammad

    2018-03-01

    NiTiHf is a high temperature and high strength shape memory alloy with transformation temperatures above 100oC. A constitutive model based on Gibbs free energy is developed to predict the behavior of this material. Two different irrecoverable strains including transformation induced plastic strain (TRIP) and viscoplastic strain (VP) are considered when using high temperature shape memory alloys (HTSMAs). The first one happens during transformation at high levels of stress and the second one is related to the creep which is rate-dependent. The developed model is implemented for NiTiHf under uniaxial loading. Finite difference method is utilized to solve the proposed equations. The material parameters in the equations are calibrated from experimental data. Simulation results are captured to investigate the superelastic behavior of NiTiHf. The extracted results are compared with experimental tests of isobaric heating and cooling at different levels of stress and also superelastic tests at different levels of temperature. More results are generated to investigate the capability of the proposed model in the prediction of the irrecoverable strain after full transformation in HTSMAs.

  3. Meat Quality of Chicken Breast Subjected to Different Thawing Methods

    Directory of Open Access Journals (Sweden)

    MR Oliveira

    2015-06-01

    Full Text Available Freezing is one of the methods to preserve and guarantee the quality of meat until it reaches the consumer. Even though freezing is classified as a mild form of preservation, it causes meat changes resulting from the formation of ice crystals that subsequently affect the tenderness and functionality of meat. The aim of this study was to evaluate the physicochemical and structural characteristics of chicken half breast submitted to fast freezing (-36 °C for 2 hours and thawed by five different methods (under refrigeration, in a microwave, in a oven with air circulation, placed in cold water, or at room temperature. After thawing, the following parameters were evaluated: moisture content, drip loss (syneresis, water activity (aw, and shear force. Samples were also histologically evaluated by light microscopy. The results indicated that, despite being submitted to fast freezing, thawing affected (p <0.05 most of the physicochemical and structural properties of the meat, except for aw. Thawing in cold water (packed in low-density polyethylene bags and placed in cold water at approximately 10 °C for 2 hours and 15 minutes presented the best results due to lesser damage to the cell structure, as shown by the lower drip loss, higher moisture content, and greater tenderness of the samples compared to those thawed using the other methods. Histological examination showed that muscle fiber structural features and organization were maintained. Thawing at low temperatures seems to cause less damage to the meat structure and allows maintaining of its properties. It was concluded that the meat quality is not related only with the freezing method, but also with the method and conditions used in thawing.

  4. [Analysis of chondroitin sulfate content of Cervi Cornu Pantotrichum with different processing methods and different parts].

    Science.gov (United States)

    Gong, Rui-Ze; Wang, Yan-Hua; Sun, Yin-Shi

    2018-02-01

    The differences and the variations of chondroitin sulfate content in different parts of Cervi Cornu Pantotrichum(CCP) with different processing methods were investigated. The chondroitin sulfate from velvet was extracted by dilute alkali-concentrated salt method. Next, the chondroitin sulfate was digested by chondroitinase ABC.The contents of total chondroitin sulfate and chondroitin sulfate A, B and C in the samples were determined by high performance liquid chromatography(HPLC).The content of chondroitin sulfate in wax,powder,gauze,bone slices of CCP with freeze-drying processing is 14.13,11.99,1.74,0.32 g·kg⁻¹, respectively. The content of chondroitin sulfate in wax,powder,gauze,bone slices of CCP with boiling processing is 10.71,8.97,2.21,1.40 g·kg⁻¹, respectively. The content of chondroitin sulfate in wax,powder,gauze,bone slices of CCP without blood is 12.47,9.47,2.64,0.07 g·kg⁻¹, respectively. And the content of chondroitin sulfate in wax,powder,gauze,bone slices of CCP with blood is 8.22,4.39,0.87,0.28 g·kg⁻¹ respectively. The results indicated that the chondroitin sulfate content in different processing methods was significantly different.The content of chondroitin sulfate in CCP with freeze-drying is higher than that in CCP with boiling processing.The content of chondroitin sulfate in CCP without blood is higher than that in CCP with blood. The chondroitin sulfate content in differerent paris of the velvet with the same processing methods was arranged from high to low as: wax slices, powder, gauze slices, bone slices. Copyright© by the Chinese Pharmaceutical Association.

  5. The Great Recession was not so Great

    NARCIS (Netherlands)

    van Ours, J.C.

    2015-01-01

    The Great Recession is characterized by a GDP-decline that was unprecedented in the past decades. This paper discusses the implications of the Great Recession analyzing labor market data from 20 OECD countries. Comparing the Great Recession with the 1980s recession it is concluded that there is a

  6. Moisture distribution in sludges based on different testing methods

    Institute of Scientific and Technical Information of China (English)

    Wenyi Deng; Xiaodong Li; Jianhua Yan; Fei Wang; Yong Chi; Kefa Cen

    2011-01-01

    Moisture distributions in municipal sewage sludge, printing and dyeing sludge and paper mill sludge were experimentally studied based on four different methods, i.e., drying test, thermogravimetric-differential thermal analysis (TG-DTA) test, thermogravimetricdifferential scanning calorimetry (TG-DSC) test and water activity test. The results indicated that the moistures in the mechanically dewatered sludges were interstitial water, surface water and bound water. The interstitial water accounted for more than 50% wet basis (wb) of the total moisture content. The bond strength of sludge moisture increased with decreasing moisture content, especially when the moisture content was lower than 50% wb. Furthermore, the comparison among the four different testing methods was presented.The drying test was advantaged by its ability to quantify free water, interstitial water, surface water and bound water; while TG-DSC test, TG-DTA test and water activity test were capable of determining the bond strength of moisture in sludge. It was found that the results from TG-DSC and TG-DTA test are more persuasive than water activity test.

  7. A method of clustering observers with different visual characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Niimi, Takanaga [Nagoya University School of Health Sciences, Department of Radiological Technology, 1-1-20 Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Imai, Kuniharu [Nagoya University School of Health Sciences, Department of Radiological Technology, 1-1-20 Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Ikeda, Mitsuru [Nagoya University School of Health Sciences, Department of Radiological Technology, 1-1-20 Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Maeda, Hisatoshi [Nagoya University School of Health Sciences, Department of Radiological Technology, 1-1-20 Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan)

    2006-01-15

    Evaluation of observer's image perception in medical images is important, and yet has not been performed because it is difficult to quantify visual characteristics. In the present study, we investigated the observer's image perception by clustering a group of 20 observers. Images of a contrast-detail (C-D) phantom, which had cylinders of 10 rows and 10 columns with different diameters and lengths, were acquired with an X-ray screen-film system with fixed exposure conditions. A group of 10 films were prepared for visual evaluations. Sixteen radiological technicians, three radiologists and one medical physicist participated in the observation test. All observers read the phantom radiographs on a transillumination image viewer with room lights off. The detectability was defined as the shortest length of the cylinders of which border the observers could recognize from the background, and was recorded using the number of columns. The detectability was calculated as the average of 10 readings for each observer, and plotted for different phantom diameter. The unweighted pair-group method using arithmetic averages (UPGMA) was adopted for clustering. The observers were clustered into two groups: one group selected objects with a demarcation from the vicinity, and the other group searched for the objects with their eyes constrained. This study showed a usefulness of the cluster method to select personnel with the similar perceptual predisposition when a C-D phantom was used in image quality control.

  8. A method of clustering observers with different visual characteristics

    International Nuclear Information System (INIS)

    Niimi, Takanaga; Imai, Kuniharu; Ikeda, Mitsuru; Maeda, Hisatoshi

    2006-01-01

    Evaluation of observer's image perception in medical images is important, and yet has not been performed because it is difficult to quantify visual characteristics. In the present study, we investigated the observer's image perception by clustering a group of 20 observers. Images of a contrast-detail (C-D) phantom, which had cylinders of 10 rows and 10 columns with different diameters and lengths, were acquired with an X-ray screen-film system with fixed exposure conditions. A group of 10 films were prepared for visual evaluations. Sixteen radiological technicians, three radiologists and one medical physicist participated in the observation test. All observers read the phantom radiographs on a transillumination image viewer with room lights off. The detectability was defined as the shortest length of the cylinders of which border the observers could recognize from the background, and was recorded using the number of columns. The detectability was calculated as the average of 10 readings for each observer, and plotted for different phantom diameter. The unweighted pair-group method using arithmetic averages (UPGMA) was adopted for clustering. The observers were clustered into two groups: one group selected objects with a demarcation from the vicinity, and the other group searched for the objects with their eyes constrained. This study showed a usefulness of the cluster method to select personnel with the similar perceptual predisposition when a C-D phantom was used in image quality control

  9. Application of different spectrophotometric methods for simultaneous determination of elbasvir and grazoprevir in pharmaceutical preparation

    Science.gov (United States)

    Attia, Khalid A. M.; El-Abasawi, Nasr M.; El-Olemy, Ahmed; Abdelazim, Ahmed H.

    2018-01-01

    The first three UV spectrophotometric methods have been developed of simultaneous determination of two new FDA approved drugs namely; elbasvir and grazoprevir in their combined pharmaceutical dosage form. These methods include simultaneous equation, partial least squares with and without variable selection procedure (genetic algorithm). For simultaneous equation method, the absorbance values at 369 (λmax of elbasvir) and 253 nm (λmax of grazoprevir) have been selected for the formation of two simultaneous equations required for the mathematical processing and quantitative analysis of the studied drugs. Alternatively, the partial least squares with and without variable selection procedure (genetic algorithm) have been applied in the spectra analysis because the synchronous inclusion of many unreal wavelengths rather than by using a single or dual wavelength which greatly increases the precision and predictive ability of the methods. Successfully assay of the drugs in their pharmaceutical formulation has been done by the proposed methods. Statistically comparative analysis for the obtained results with the manufacturing methods has been performed. It is noteworthy to mention that there was no significant difference between the proposed methods and the manufacturing one with respect to the validation parameters.

  10. Assessment of hip dysplasia and osteoarthritis: Variability of different methods

    International Nuclear Information System (INIS)

    Troelsen, Anders; Elmengaard, Brian; Soeballe, Kjeld; Roemer, Lone; Kring, Soeren

    2010-01-01

    Background: Reliable assessment of hip dysplasia and osteoarthritis is crucial in young adults who may benefit from joint-preserving surgery. Purpose: To investigate the variability of different methods for diagnostic assessment of hip dysplasia and osteoarthritis. Material and Methods: By each of four observers, two assessments were done by vision and two by angle construction. For both methods, the intra- and interobserver variability of center-edge and acetabular index angle assessment were analyzed. The observers' ability to diagnose hip dysplasia and osteoarthritis were assessed. All measures were compared to those made on computed tomography scan. Results: Intra- and interobserver variability of angle assessment was less when angles were drawn compared with assessment by vision, and the observers' ability to diagnose hip dysplasia improved when angles were drawn. Assessment of osteoarthritis in general showed poor agreement with findings on computed tomography scan. Conclusion: We recommend that angles always should be drawn for assessment of hip dysplasia on pelvic radiographs. Given the inherent variability of diagnostic assessment of hip dysplasia, a computed tomography scan could be considered in patients with relevant hip symptoms and a center-edge angle between 20 deg and 30 deg. Osteoarthritis should be assessed by measuring the joint space width or by classifying the Toennis grade as either 0-1 or 2-3

  11. Assessment of hip dysplasia and osteoarthritis: Variability of different methods

    Energy Technology Data Exchange (ETDEWEB)

    Troelsen, Anders; Elmengaard, Brian; Soeballe, Kjeld (Orthopedic Research Unit, Univ. Hospital of Aarhus, Aarhus (Denmark)), e-mail: a_troelsen@hotmail.com; Roemer, Lone (Dept. of Radiology, Univ. Hospital of Aarhus, Aarhus (Denmark)); Kring, Soeren (Dept. of Orthopedic Surgery, Aabenraa Hospital, Aabenraa (Denmark))

    2010-03-15

    Background: Reliable assessment of hip dysplasia and osteoarthritis is crucial in young adults who may benefit from joint-preserving surgery. Purpose: To investigate the variability of different methods for diagnostic assessment of hip dysplasia and osteoarthritis. Material and Methods: By each of four observers, two assessments were done by vision and two by angle construction. For both methods, the intra- and interobserver variability of center-edge and acetabular index angle assessment were analyzed. The observers' ability to diagnose hip dysplasia and osteoarthritis were assessed. All measures were compared to those made on computed tomography scan. Results: Intra- and interobserver variability of angle assessment was less when angles were drawn compared with assessment by vision, and the observers' ability to diagnose hip dysplasia improved when angles were drawn. Assessment of osteoarthritis in general showed poor agreement with findings on computed tomography scan. Conclusion: We recommend that angles always should be drawn for assessment of hip dysplasia on pelvic radiographs. Given the inherent variability of diagnostic assessment of hip dysplasia, a computed tomography scan could be considered in patients with relevant hip symptoms and a center-edge angle between 20 deg and 30 deg. Osteoarthritis should be assessed by measuring the joint space width or by classifying the Toennis grade as either 0-1 or 2-3

  12. Antioxidant activity of wine assessed by different in vitro methods

    Directory of Open Access Journals (Sweden)

    Di Lorenzo Chiara

    2017-01-01

    Full Text Available Epidemiological studies have suggested that a diet rich in antioxidant compounds could help in counteracting the effects of reactive oxygen species, reducing the risk factors for chronic diseases. The moderate consumption of wine, especially red wine, has been associated with the reduction in mortalities from cardiovascular diseases. One of the possible reasons for the protective effect of wine can be identified in the high content of polyphenols (mainly flavonoids, which have significant antioxidant activity. Even though several in vitro tests have been developed for the measure of the antioxidant property, no method has showed a satisfactory correlation with the in vivo situation. On these bases, the aim of this study was the application and comparison of different in vitro methods to assess the antioxidant activity of red, rosé and white wines. The methods were: 1 Folin-Cocalteau's assay for the quantification of total polyphenol content; 2 the DPPH (1,1-diphenyl-2-picrylhydrazyl spectrophotometric assay and the Trolox Equivalent Antioxidant Capacity (TEAC spectrophotometric assay for measuring the antioxidant activity of samples; 3 High Performance Thin Layer Chromatography for separation of phenolic substances and assessment of the associated antioxidant activity; 4 electrochemical detection by using a biosensor. Although all the approaches show some limitations, this battery of tests offers a more reliable body of data on the antioxidant activity of vine derivatives.

  13. Long term performance of different radon remedial methods in Sweden

    International Nuclear Information System (INIS)

    Clavensjoe, Bertil

    2002-06-01

    The object of this project was to investigate the long time effectiveness of different radon remedial methods. The ten years project started 1991. From start the investigation comprised of 105 dwellings (91 single-family houses and 14 flats in multi-family buildings). In all of the dwellings remedial measures were carried out in the eighties. Before and immediately after the reduction the local authorities measured the radon concentrations. New measurements of the radon concentrations have been made every third year; in 1991, 1994, 1997 and in 2000. Twelve different radon remedial methods and method combinations were used. The radon sources were building materials as well as sub-soils. In all of the dwellings the radon concentrations were measured by nuclear track films during 3 months (January-March) measurements and in half of them the air change rates by passive tracer gas methods. The results of the 2000 and the 1991 (within brackets) studies showed that the radon concentration was up to 200 Bq/m 3 in 54 (54) single-family houses and 7 (7) flats, between 210 Bq/m 3 and 400 Bq/m 3 in 23 (18) single-family houses and 5 (6) flats, and higher than 400 Bq/m 3 in 12 (18) single-family houses and 2 (1) flats. The study 1991 showed also that in about 40 % of the cases the radon concentration had increased by more than 30 % only a few years after reduction actions had been taken. In 19 dwellings the radon concentration was at least doubled. In no fewer than 38 dwellings the radon level has been over 400 Bq/m 3 in at least one of the four measuring occasions. The change in radon concentrations was not specific to any given method but seemed to be evenly distributed over all of them. The investigation results showed the necessity for repeated measuring where counter measures have been taken. The causes for increasing radon levels have been made clear in all except 2-3 cases

  14. Comparison of different surface quantitative analysis methods. Application to corium

    International Nuclear Information System (INIS)

    Guilbaud, N.; Blin, D.; Perodeaud, Ph.; Dugne, O.; Gueneau, Ch.

    2000-01-01

    In case of a severe hypothetical accident in a pressurized water reactor, the reactor assembly melts partially or completely. The material formed, called corium, flows out and spreads at the bottom of the reactor. To limit and control the consequences of such an accident, the specifications of the O-U-Zr basic system must be known accurately. To achieve this goal, the corium mix was melted by electron bombardment at very high temperature (3000 K) followed by quenching of the ingot in the Isabel 1 evaporator. Metallographic analyses were then required to validate the thermodynamic databases set by the Thermo-Calc software. The study consists in defining an overall surface quantitative analysis method that is fast and reliable, in order to determine the overall corium composition. The analyzed ingot originated in a [U+Fe+Y+UO 2 +ZrO 2 ) mix, with a total mass of 2253.7 grams. Several successive heating with average power were performed before a very brief plateau at very high temperature, so that the ingot was formed progressively and without any evaporation liable to modify its initial composition. The central zone of the ingot was then analyzed by qualitative and quantitative global surface methods, to yield the volume composition of the analyzed zone. Corium sample analysis happens to be very complex because of the variety and number of elements present, and also because of the presence of oxygen in a heavy element like the uranium based matrix. Three different global quantitative surface analysis methods were used: global EDS analysis (Energy Dispersive Spectrometry), with SEM, global WDS analysis (Wavelength Dispersive Spectrometry) with EPMA, and coupling of image analysis with EDS or WDS point spectroscopic analyses. The difficulties encountered during the study arose from sample preparation (corium is very sensitive to oxidation), and the choice of acquisition parameters of the images and analyses. The corium sample studied consisted of two zones displaying

  15. Evaluation of the positional difference between two common geocoding methods

    Directory of Open Access Journals (Sweden)

    Dustin T. Duncan

    2011-05-01

    Full Text Available Geocoding, the process of matching addresses to geographic coordinates, is a necessary first step when using geographical information systems (GIS technology. However, different geocoding methodologies can result in different geographic coordinates. The objective of this study was to compare the positional (i.e. longitude/latitude difference between two common geocoding methods, i.e. ArcGIS (Environmental System Research Institute, Redlands, CA, USA and Batchgeo (freely available online at http://www.batchgeo.com. Address data came from the YMCA-Harvard After School Food and Fitness Project, an obesity prevention intervention involving children aged 5-11 years and their families participating in YMCAadministered, after-school programmes located in four geographically diverse metropolitan areas in the USA. Our analyses include baseline addresses (n = 748 collected from the parents of the children in the after school sites. Addresses were first geocoded to the street level and assigned longitude and latitude coordinates with ArcGIS, version 9.3, then the same addresses were geocoded with Batchgeo. For this analysis, the ArcGIS minimum match score was 80. The resulting geocodes were projected into state plane coordinates, and the difference in longitude and latitude coordinates were calculated in meters between the two methods for all data points in each of the four metropolitan areas. We also quantified the descriptions of the geocoding accuracy provided by Batchgeo with the match scores from ArcGIS. We found a 94% match rate (n = 705, 2% (n = 18 were tied and 3% (n = 25 were unmatched using ArcGIS. Forty-eight addresses (6.4% were not matched in ArcGIS with a match score ≥80 (therefore only 700 addresses were included in our positional difference analysis. Six hundred thirteen (87.6% of these addresses had a match score of 100. Batchgeo yielded a 100% match rate for the addresses that ArcGIS geocoded. The median for longitude and latitude

  16. Numerical Simulation of Tubular Pumping Systems with Different Regulation Methods

    Science.gov (United States)

    Zhu, Honggeng; Zhang, Rentian; Deng, Dongsheng; Feng, Xusong; Yao, Linbi

    2010-06-01

    Since the flow in tubular pumping systems is basically along axial direction and passes symmetrically through the impeller, most satisfying the basic hypotheses in the design of impeller and having higher pumping system efficiency in comparison with vertical pumping system, they are being widely applied to low-head pumping engineering. In a pumping station, the fluctuation of water levels in the sump and discharge pool is most common and at most time the pumping system runs under off-design conditions. Hence, the operation of pump has to be flexibly regulated to meet the needs of flow rates, and the selection of regulation method is as important as that of pump to reduce operation cost and achieve economic operation. In this paper, the three dimensional time-averaged Navier-Stokes equations are closed by RNG κ-ɛ turbulent model, and two tubular pumping systems with different regulation methods, equipped with the same pump model but with different designed system structures, are numerically simulated respectively to predict the pumping system performances and analyze the influence of regulation device and help designers make final decision in the selection of design schemes. The computed results indicate that the pumping system with blade-adjusting device needs longer suction box, and the increased hydraulic loss will lower the pumping system efficiency in the order of 1.5%. The pumping system with permanent magnet motor, by means of variable speed regulation, obtains higher system efficiency partly for shorter suction box and partly for different structure design. Nowadays, the varied speed regulation is realized by varied frequency device, the energy consumption of which is about 3˜4% of output power of the motor. Hence, when the efficiency of variable frequency device is considered, the total pumping system efficiency will probably be lower.

  17. Estimation of water percolation by different methods using TDR

    Directory of Open Access Journals (Sweden)

    Alisson Jadavi Pereira da Silva

    2014-02-01

    Full Text Available Detailed knowledge on water percolation into the soil in irrigated areas is fundamental for solving problems of drainage, pollution and the recharge of underground aquifers. The aim of this study was to evaluate the percolation estimated by time-domain-reflectometry (TDR in a drainage lysimeter. We used Darcy's law with K(θ functions determined by field and laboratory methods and by the change in water storage in the soil profile at 16 points of moisture measurement at different time intervals. A sandy clay soil was saturated and covered with plastic sheet to prevent evaporation and an internal drainage trial in a drainage lysimeter was installed. The relationship between the observed and estimated percolation values was evaluated by linear regression analysis. The results suggest that percolation in the field or laboratory can be estimated based on continuous monitoring with TDR, and at short time intervals, of the variations in soil water storage. The precision and accuracy of this approach are similar to those of the lysimeter and it has advantages over the other evaluated methods, of which the most relevant are the possibility of estimating percolation in short time intervals and exemption from the predetermination of soil hydraulic properties such as water retention and hydraulic conductivity. The estimates obtained by the Darcy-Buckingham equation for percolation levels using function K(θ predicted by the method of Hillel et al. (1972 provided compatible water percolation estimates with those obtained in the lysimeter at time intervals greater than 1 h. The methods of Libardi et al. (1980, Sisson et al. (1980 and van Genuchten (1980 underestimated water percolation.

  18. A finite-difference contrast source inversion method

    International Nuclear Information System (INIS)

    Abubakar, A; Hu, W; Habashy, T M; Van den Berg, P M

    2008-01-01

    We present a contrast source inversion (CSI) algorithm using a finite-difference (FD) approach as its backbone for reconstructing the unknown material properties of inhomogeneous objects embedded in a known inhomogeneous background medium. Unlike the CSI method using the integral equation (IE) approach, the FD-CSI method can readily employ an arbitrary inhomogeneous medium as its background. The ability to use an inhomogeneous background medium has made this algorithm very suitable to be used in through-wall imaging and time-lapse inversion applications. Similar to the IE-CSI algorithm the unknown contrast sources and contrast function are updated alternately to reconstruct the unknown objects without requiring the solution of the full forward problem at each iteration step in the optimization process. The FD solver is formulated in the frequency domain and it is equipped with a perfectly matched layer (PML) absorbing boundary condition. The FD operator used in the FD-CSI method is only dependent on the background medium and the frequency of operation, thus it does not change throughout the inversion process. Therefore, at least for the two-dimensional (2D) configurations, where the size of the stiffness matrix is manageable, the FD stiffness matrix can be inverted using a non-iterative inversion matrix approach such as a Gauss elimination method for the sparse matrix. In this case, an LU decomposition needs to be done only once and can then be reused for multiple source positions and in successive iterations of the inversion. Numerical experiments show that this FD-CSI algorithm has an excellent performance for inverting inhomogeneous objects embedded in an inhomogeneous background medium

  19. Quantification of fatty acids in salmon fillets conserved by different methods

    Directory of Open Access Journals (Sweden)

    Renata Menoci Gonçalves

    2017-09-01

    Full Text Available Lipid contents and the composition of fatty acids of fillets from Chilean salmon (Salmo salar were determined under different conservation methods: fresh salmon, frozen salmon, water-conserved canned salmon and frozen salmon in long-term storage. Fatty acid contents were determined by gas chromatography. The fillets had high lipid levels, ranging between 9.71 and 12.86%. All samples presented high levels of monounsaturated fatty acids, between 363.69 and 425.30 mg g-1 of total lipids, followed by polyunsaturated fatty acids (294.46 - 342.45 mg g-1 of total lipids and saturated fatty acids (203.32 - 223.17 mg g-1 of total lipids. Although samples revealed different lipid contents, all proved to be great sources of omega-3 fatty acids, regardless of the manner of conservation.

  20. High order spectral volume and spectral difference methods on unstructured grids

    Science.gov (United States)

    Kannan, Ravishekar

    The spectral volume (SV) and the spectral difference (SD) methods were developed by Wang and Liu and their collaborators for conservation laws on unstructured grids. They were introduced to achieve high-order accuracy in an efficient manner. Recently, these methods were extended to three-dimensional systems and to the Navier Stokes equations. The simplicity and robustness of these methods have made them competitive against other higher order methods such as the discontinuous Galerkin and residual distribution methods. Although explicit TVD Runge-Kutta schemes for the temporal advancement are easy to implement, they suffer from small time step limited by the Courant-Friedrichs-Lewy (CFL) condition. When the polynomial order is high or when the grid is stretched due to complex geometries or boundary layers, the convergence rate of explicit schemes slows down rapidly. Solution strategies to remedy this problem include implicit methods and multigrid methods. A novel implicit lower-upper symmetric Gauss-Seidel (LU-SGS) relaxation method is employed as an iterative smoother. It is compared to the explicit TVD Runge-Kutta smoothers. For some p-multigrid calculations, combining implicit and explicit smoothers for different p-levels is also studied. The multigrid method considered is nonlinear and uses Full Approximation Scheme (FAS). An overall speed-up factor of up to 150 is obtained using a three-level p-multigrid LU-SGS approach in comparison with the single level explicit method for the Euler equations for the 3rd order SD method. A study of viscous flux formulations was carried out for the SV method. Three formulations were used to discretize the viscous fluxes: local discontinuous Galerkin (LDG), a penalty method and the 2nd method of Bassi and Rebay. Fourier analysis revealed some interesting advantages for the penalty method. These were implemented in the Navier Stokes solver. An implicit and p-multigrid method was also implemented for the above. An overall speed

  1. The Different Methods of Displacement Monitoring at Loading Tests of Bridges or Different Structures

    Directory of Open Access Journals (Sweden)

    Kovačič Boštjan

    2016-01-01

    Full Text Available By measuring the displacements and deformations at different structures we deal in the Faculty of Civil Engineering, transportation Engineering and Architecture in University of Maribor for about 20 years. At that time we measured over 600 structures. Most loading tests of bridges and Viaducts were made. The measurements of movements needed to be as precise and accurate as possible. To do that laboratory test of instruments were made to see which instrument gives us reliable results. Displacements can be determined by geodetic and physical methods, depends of the construction. The use of geodetic methods are still preferable. In the paper the measurements with the total station, the level and rotation level, photogrammetry and solutions on the field by physical methods with inductive transducers are presented. We need to measure displacements as quick as possible but efficiently because we can not repeat the measurements under the same conditions. Also the surveying on the bridge and in the lab with the comparison of methods is presented under the different hard terrain conditions - water beneath the construction, big height of the structure, unapproachability, large span structures.

  2. Evaluation of different field methods for measuring soil water infiltration

    Science.gov (United States)

    Pla-Sentís, Ildefonso; Fonseca, Francisco

    2010-05-01

    Soil infiltrability, together with rainfall characteristics, is the most important hydrological parameter for the evaluation and diagnosis of the soil water balance and soil moisture regime. Those balances and regimes are the main regulating factors of the on site water supply to plants and other soil organisms and of other important processes like runoff, surface and mass erosion, drainage, etc, affecting sedimentation, flooding, soil and water pollution, water supply for different purposes (population, agriculture, industries, hydroelectricity), etc. Therefore the direct measurement of water infiltration rates or its indirect deduction from other soil characteristics or properties has become indispensable for the evaluation and modelling of the previously mentioned processes. Indirect deductions from other soil characteristics measured under laboratory conditions in the same soils, or in other soils, through the so called "pedo-transfer" functions, have demonstrated to be of limited value in most of the cases. Direct "in situ" field evaluations have to be preferred in any case. In this contribution we present the results of past experiences in the measurement of soil water infiltration rates in many different soils and land conditions, and their use for deducing soil water balances under variable climates. There are also presented and discussed recent results obtained in comparing different methods, using double and single ring infiltrometers, rainfall simulators, and disc permeameters, of different sizes, in soils with very contrasting surface and profile characteristics and conditions, including stony soils and very sloping lands. It is concluded that there are not methods universally applicable to any soil and land condition, and that in many cases the results are significantly influenced by the way we use a particular method or instrument, and by the alterations in the soil conditions by the land management, but also due to the manipulation of the surface

  3. Great differences in the critical erosion threshold between surface and subsurface sediments: A field investigation of an intertidal mudflat, Jiangsu, China

    Science.gov (United States)

    Shi, Benwei; Wang, Ya Ping; Wang, Li Hua; Li, Peng; Gao, Jianhua; Xing, Fei; Chen, Jing Dong

    2018-06-01

    Understanding of bottom sediment erodibility is necessary for the sustainable management and protection of coastlines, and is of great importance for numerical models of sediment dynamics and transport. To investigate the dependence of sediment erodibility on degree of consolidation, we measured turbidity, waves, tidal currents, intratidal bed-level changes, and sediment properties on an exposed macrotidal mudflat during a series of tidal cycles. We estimated the water content of surface sediments (in the uppermost 2 cm of sediment) and sub-surface sediments (at 2 cm below the sediment surface). Bed shear stress values due to currents (τc), waves (τw), and combined current-wave action (τcw) were calculated using a hydrodynamic model. In this study, we estimate the critical shear stress for erosion using two approaches and both of them give similar results. We found that the critical shear stress for erosion (τce) was 0.17-0.18 N/m2 in the uppermost 0-2 cm of sediment and 0.29 N/m2 in sub-surface sediment layers (depth, 2 cm), as determined by time series of τcw values and intratidal bed-level changes, and values of τce, obtained using the water content of bottom sediments, were 0.16 N/m2 in the uppermost 2 cm and 0.28 N/m2 in the sub-surface (depth, 2 cm) sediment. These results indicate that the value of τce for sub-surface sediments (depth, 2 cm) is much greater than that for the uppermost sediments (depth, 0-2 cm), and that the τce value is mainly related to the water content, which is determined by the extent of consolidation. Our results have implications for improving the predictive accuracy of models of sediment transport and morphological evolution, by introducing variable τce values for corresponding sediment layers, and can also provide a mechanistic understanding of bottom sediment erodibility at different sediment depths on intertidal mudflats, as related to differences in the consolidation time.

  4. METHODS FOR OVERCOMING SEED DORMANCY AND THE INITIAL GROWTH OF Ziziphus joazeiro Mart. IN DIFFERENT SOILS

    Directory of Open Access Journals (Sweden)

    JOSENARA DAIANE DE SOUZA COSTA

    2016-01-01

    Full Text Available Considering the potential and importance of biodiversity of the Caatinga biome, studies on endemic species are relevant to conservation of its natural resources. The objectives of this work was to evaluate seed viability and physical methods for overcoming seed dormancy in juazeiro (Ziziphus joazeiro Mart. and assess the influence of different types of soil on the initial growth of juazeiro plants. The experiments were conducted in three stages. In the first stage, the viability of seeds from different lots was evaluated using the tetrazolium test. The second stage was conducted in a plant nursery, evaluating the application of physical processes (scarification with sandpaper and hammer in overcoming seed dormancy, and the initial growth of the plants. In the third step, the chlorophyll a and b contents, gas exchange and dry matter accumulation were evaluated in young juazeiro plants in three types of soil (Oxisol, Entisol and Vertisol. The results indicate that the viability of juazeiro seeds is greatly influenced by differences between the progenitor plants and by storage conditions, which enable a longevity of two years when stored at 22°C and 16% of relative humidity. The scarification methods with sandpaper and hammer are not efficient to reduce the time and uniform seed germination. The juazeiro plants have high growth potential in different edaphic environments, adapting well to soils of different textures and chemical compositions.

  5. Computation of Hemagglutinin Free Energy Difference by the Confinement Method

    Science.gov (United States)

    2017-01-01

    Hemagglutinin (HA) mediates membrane fusion, a crucial step during influenza virus cell entry. How many HAs are needed for this process is still subject to debate. To aid in this discussion, the confinement free energy method was used to calculate the conformational free energy difference between the extended intermediate and postfusion state of HA. Special care was taken to comply with the general guidelines for free energy calculations, thereby obtaining convergence and demonstrating reliability of the results. The energy that one HA trimer contributes to fusion was found to be 34.2 ± 3.4kBT, similar to the known contributions from other fusion proteins. Although computationally expensive, the technique used is a promising tool for the further energetic characterization of fusion protein mechanisms. Knowledge of the energetic contributions per protein, and of conserved residues that are crucial for fusion, aids in the development of fusion inhibitors for antiviral drugs. PMID:29151344

  6. Removing efficiency of radon from water by different methods

    International Nuclear Information System (INIS)

    Muellerova, M.; Holy, K.; Gulasova, Z.; Polaskova, A.

    2008-01-01

    In this contribution problem of radon removing from water samples by different methods was tested. Lowest efficiency of deemanation was achieved at tossing of water from one vessel into the other. For increasing of efficiency deemanation of radon use of needle-bath principle was also used. Low efficiency deemanation was found at trapping of radon from sample of water by toluene (83 ± 5) %, too. Reversal highest efficiency deemanation of radon from water was reached at aerating by argon (95 ± 6)%. It is shown, that reduction of volume activity of radon in water under 0.1 Bq/dm l - 3 is big problem. Suppression of this limit will claim use of more completion and sophistic approaches. (author)

  7. A parallel finite-difference method for computational aerodynamics

    International Nuclear Information System (INIS)

    Swisshelm, J.M.

    1989-01-01

    A finite-difference scheme for solving complex three-dimensional aerodynamic flow on parallel-processing supercomputers is presented. The method consists of a basic flow solver with multigrid convergence acceleration, embedded grid refinements, and a zonal equation scheme. Multitasking and vectorization have been incorporated into the algorithm. Results obtained include multiprocessed flow simulations from the Cray X-MP and Cray-2. Speedups as high as 3.3 for the two-dimensional case and 3.5 for segments of the three-dimensional case have been achieved on the Cray-2. The entire solver attained a factor of 2.7 improvement over its unitasked version on the Cray-2. The performance of the parallel algorithm on each machine is analyzed. 14 refs

  8. Comparison of different skin preservation methods with gamma irradiation.

    Science.gov (United States)

    Guerrero, Linda; Camacho, Bernardo

    2017-06-01

    Allografts are in constant demand, not only for burn victims, but also for all open wounds as "biological dressings". Tissue quality and security are two of the major concerns of Tissue Banks. There are limited studies published. There has been extensive discussion on the subject of preservation methods for cadaver skin. Most literature available comes from clinical reports. In this research, the authors compared 85% glycerolized non irradiated skin allografts with three glycerolized irradiated skin allografts (using different glycerol concentrations 50%, 70% and 85%). The evaluation of allograft quality was done by measuring physical and biological properties of such prepared human tissue grafts. In the histological structure evaluation changes were minimal and did not alter the skin structure. The clinical function of their behavior as temporal dressings was tested. They proved to have similar capabilities for improving granulating tissue and contributing to wound beds closure (Hickerson et al. (1994) [1]). Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

  9. Learning and retention of quantum concepts with different teaching methods

    Science.gov (United States)

    Deslauriers, Louis; Wieman, Carl

    2011-06-01

    We measured mastery and retention of conceptual understanding of quantum mechanics in a modern physics course. This was studied for two equivalent cohorts of students taught with different pedagogical approaches using the Quantum Mechanics Conceptual Survey. We measured the impact of pedagogical approach both on the original conceptual learning and on long-term retention. The cohort of students who had a very highly rated traditional lecturer scored 19% lower than the equivalent cohort that was taught using interactive engagement methods. However, the amount of retention was very high for both cohorts, showing only a few percent decrease in scores when retested 6 and 18 months after completion of the course and with no exposure to the material in the interim period. This high level of retention is in striking contrast to the retention measured for more factual learning from university courses and argues for the value of emphasizing conceptual learning.

  10. Comparison between two different methods for evaluating rumen papillae measures related to different diets.

    Science.gov (United States)

    Scocco, Paola; Brusaferro, Andrea; Catorci, Andrea

    2012-07-01

    Although the Geographical Information System (GIS), which integrates computerized drawing computer assisted design (CAD) and relational databases (data base management system (DBMS)), is best known for applications in geographical and planning cartography, it can also use many kinds of information concerning the territory. A multidisciplinary project was initiated since 5 years a multidisciplinary study was initiated to use GIS to integrate environmental and ecological data with findings on animal health, ethology, and anatomy. This study is chiefly aimed at comparing two different methods for measuring the absorptive surface of rumen papillae. To this scope, 21 female sheep (Ovis aries) on different alimentary regimes (e.g., milk and forage mixed diet, early herbaceous diet, dry hay diet, and fresh hay diet at the maximum of pasture flowering and at the maximum of pasture dryness) were used; after slaughtering, 20 papillae were randomly removed from each sample collected from four indicator regions of rumen wall, placed near a metric reference and digitally photographed. The images were developed with the ArcGIS™ software to calculate the area of rumen papillae by means of GIS and to measure their mid-level width and length to calculate the papillae area as previously performed with a different method. Spatial measurements were analyzed using univariate and multivariate methods. This work demonstrates that the GIS methodology can be efficiently used for measuring the absorptive surface of rumen papillae. In addition, GIS demonstrated to be a rapid, precise, and objective tool when compared with previously used method. Copyright © 2012 Wiley Periodicals, Inc.

  11. Method to deterministically study photonic nanostructures in different experimental instruments.

    Science.gov (United States)

    Husken, B H; Woldering, L A; Blum, C; Vos, W L

    2009-01-01

    We describe an experimental method to recover a single, deterministically fabricated nanostructure in various experimental instruments without the use of artificially fabricated markers, with the aim to study photonic structures. Therefore, a detailed map of the spatial surroundings of the nanostructure is made during the fabrication of the structure. These maps are made using a series of micrographs with successively decreasing magnifications. The graphs reveal intrinsic and characteristic geometric features that can subsequently be used in different setups to act as markers. As an illustration, we probe surface cavities with radii of 65 nm on a silica opal photonic crystal with various setups: a focused ion beam workstation; a scanning electron microscope (SEM); a wide field optical microscope and a confocal microscope. We use cross-correlation techniques to recover a small area imaged with the SEM in a large area photographed with the optical microscope, which provides a possible avenue to automatic searching. We show how both structural and optical reflectivity data can be obtained from one and the same nanostructure. Since our approach does not use artificial grids or markers, it is of particular interest for samples whose structure is not known a priori, like samples created solely by self-assembly. In addition, our method is not restricted to conducting samples.

  12. Burnout in dental students: effectiveness of different methods

    Directory of Open Access Journals (Sweden)

    Juliana Alvares Duarte Bonini Campos

    Full Text Available OBJECTIVE: This study was proposed to estimate the effectiveness of different screening methods of the Burnout Syndrome among dental students. MATERIAL AND METHOD: The Burnout Syndrome assessment was performed using the Oldenburg Inventory-Student survey (OLBI-SS and the Copenhagen Inventory-Student survey (CBI‑SS. The Maslach Burnout Inventory-Student survey (MBI-SS was used as the gold standard. The psychometric properties of the instruments were measured. The second-order hierarchical model was estimated to calculate the overall scores for OLBI-SS and CBI-SS, and ROC curves were constructed and the areas were estimated (AUROC. RESULT: A total of 235 undergraduate students participated in this study. The instruments showed an adequate reliability and validity; however three questions had to be removed from OLBI-SS and one from CBI-SS. The Exhaustion dimension of OLBI-SS, and Personal Burnout and Study related Burnout of CBI-SS presented a good discriminating capacity. CONCLUSION: CBI-SS showed higher discriminating capacity, than OLBI-SS, to identify the Burnout Syndrome (DAUROC=.172 [.103-.240]; p<.05.

  13. Repairability of Compomers with Different Methods of Surface Conditioning

    Directory of Open Access Journals (Sweden)

    P.Samimi

    2005-06-01

    Full Text Available Statement of Problem: Considering the cost and amount of time and also the quantity of tooth loss in the process of cavity preparation, repair of the restoration instead of itsreplacement would be much more efficient.Purpose: The aim of this study was to determine the effect of different methods of surface conditioning on the shear bond strength of repaired compomers.Materials and Methods: Sixty blocks of compomer were prepared in acrylic molds and then they were randomly divided into five groups of 12. Group I (control groupreceived no treatment. The remaining samples were immersed in 37 ºC distilled water for one week, then the surfaces were roughened with a coarse diamond bur. Samples ineach group were prepared by different surface treatment and conditioning: In group II specimens were conditioned with 35% phosphoric acid for 20s. Specimens in group III were etched with 10% polyacrylic acid for 20s. In group IV 1.23% acidulated phosphatefluoride was applied for 30s, and compomer surfaces were sandblasted with 50μm Al2O3 powder in group V. After the initial preparations, all groups were treated with silane and resin before bonding of the second mix of compomer. Shear forces were applied with a universal testing machine at a cross-head speed of 5mm/min. The data were analyzed using one-way ANOVA and Duncan's multiple range tests.Results: The mean shear bond strengths and standard deviations (in parentheses for groups I to V were 31.56(10.86, 20.02(5.49, 17.74(7.34, 19.31(4.31 and 27.7(6.33MPa, respectively. The mean bond strengths for Groups I and V were significantly higher than that of the other groups (P<0.05.Conclusion: The results showed that among the surface treatments used in this study,sandblasting with alumina could be the best surface preparation method for repairing compomer restorations.

  14. Comparison of different methods to include recycling in LCAs of aluminium cans and disposable polystyrene cups.

    Science.gov (United States)

    van der Harst, Eugenie; Potting, José; Kroeze, Carolien

    2016-02-01

    Many methods have been reported and used to include recycling in life cycle assessments (LCAs). This paper evaluates six widely used methods: three substitution methods (i.e. substitution based on equal quality, a correction factor, and alternative material), allocation based on the number of recycling loops, the recycled-content method, and the equal-share method. These six methods were first compared, with an assumed hypothetical 100% recycling rate, for an aluminium can and a disposable polystyrene (PS) cup. The substitution and recycled-content method were next applied with actual rates for recycling, incineration and landfilling for both product systems in selected countries. The six methods differ in their approaches to credit recycling. The three substitution methods stimulate the recyclability of the product and assign credits for the obtained recycled material. The choice to either apply a correction factor, or to account for alternative substituted material has a considerable influence on the LCA results, and is debatable. Nevertheless, we prefer incorporating quality reduction of the recycled material by either a correction factor or an alternative substituted material over simply ignoring quality loss. The allocation-on-number-of-recycling-loops method focusses on the life expectancy of material itself, rather than on a specific separate product. The recycled-content method stimulates the use of recycled material, i.e. credits the use of recycled material in products and ignores the recyclability of the products. The equal-share method is a compromise between the substitution methods and the recycled-content method. The results for the aluminium can follow the underlying philosophies of the methods. The results for the PS cup are additionally influenced by the correction factor or credits for the alternative material accounting for the drop in PS quality, the waste treatment management (recycling rate, incineration rate, landfilling rate), and the

  15. USING SESSION RPE TO MONITOR DIFFERENT METHODS OF RESISTANCE EXERCISE

    Directory of Open Access Journals (Sweden)

    Alison D. Egan

    2006-06-01

    Full Text Available The purpose of this study was to compare session rating of perceived exertion for different resistance training techniques in the squat exercise. These techniques included traditional resistance training, super slow, and maximal power training. Fourteen college-age women (Mean ± SD; age = 22 ± 3 years; height = 1.68 ± 0. 07 m completed three experimental trials in a randomized crossover design. The traditional resistance training protocol consisted of 6 sets of 6 repetitions of squats using 80% of 1-RM. The super slow protocol consisted of 6 sets of 6 repetitions using 55% of 1-RM. The maximal power protocol consisted of 6 sets of 6 repetitions using 30% of 1-RM. Rating of perceived exertion (RPE measures were obtained following each set using Borg's CR-10 scale. In addition, a session RPE value was obtained 30 minutes following each exercise session. When comparing average RPE and session RPE, no significant difference was found. However, power training had significantly lower (p < 0.05 average and session RPE (4.50 ± 1.9 and 4.5 ± 2.1 compared to both super slow training (7.81 ± 1.75 and 7.43 ± 1.73 and traditional training (7.33 ± 1.52 and 7.13 ± 1.73. The results indicate that session RPE values are not significantly different from the more traditional methods of measuring RPE during exercise bouts. It does appear that the resistance training mode that is used results in differences in perceived exertion that does not relate directly to the loading that is used. Using session RPE provides practitioners with the same information about perceived exertion as the traditional RPE measures. Taking a single measure following a training session would appear to be much easier than using multiple measures of RPE throughout a resistance training workout. However, practitioners should also be aware that the RPE does not directly relate to the relative intensity used and appears to be dependent on the mode of resistance exercise that is used

  16. The great intimidators.

    Science.gov (United States)

    Kramer, Roderick M

    2006-02-01

    After Disney's Michael Eisner, Miramax's Harvey Weinstein, and Hewlett-Packard's Carly Fiorina fell from their heights of power, the business media quickly proclaimed thatthe reign of abrasive, intimidating leaders was over. However, it's premature to proclaim their extinction. Many great intimidators have done fine for a long time and continue to thrive. Their modus operandi runs counter to a lot of preconceptions about what it takes to be a good leader. They're rough, loud, and in your face. Their tactics include invading others' personal space, staging tantrums, keeping people guessing, and possessing an indisputable command of facts. But make no mistake--great intimidators are not your typical bullies. They're driven by vision, not by sheer ego or malice. Beneath their tough exteriors and sharp edges are some genuine, deep insights into human motivation and organizational behavior. Indeed, these leaders possess political intelligence, which can make the difference between paralysis and successful--if sometimes wrenching--organizational change. Like socially intelligent leaders, politically intelligent leaders are adept at sizing up others, but they notice different things. Those with social intelligence assess people's strengths and figure out how to leverage them; those with political intelligence exploit people's weaknesses and insecurities. Despite all the obvious drawbacks of working under them, great intimidators often attract the best and brightest. And their appeal goes beyond their ability to inspire high performance. Many accomplished professionals who gravitate toward these leaders want to cultivate a little "inner intimidator" of their own. In the author's research, quite a few individuals reported having positive relationships with intimidating leaders. In fact, some described these relationships as profoundly educational and even transformational. So before we throw out all the great intimidators, the author argues, we should stop to consider what

  17. Variability of morphometric caracteristics of one-year seedlings of different half-sib European White Elm (Ulmus effusa Wild. from the Great War Island

    Directory of Open Access Journals (Sweden)

    Devetaković, J.

    2013-12-01

    Full Text Available European White Elm is recognized as a rare and endangered species in the forest fund of the Republic of Serbia. During the past century massive drying of elms occurred and the indications of their extinction appeared, which consequently led to a reduction in genetic diversity and the danger of genetic drift. In the area of the Great War Island near Belgrade we found 56 trees of European White Elm that are spatially divided into three subpopulations. In order to assess the genetic potential of European White Elm in the Great War Island and to define adequate conservation measures variability of 14 selected test trees progeny was rated. Results shows that the satisfactory variability within the popoulation exists, which is a good basis for the conservation of genepool available.

  18. Great Lakes Science Center

    Data.gov (United States)

    Federal Laboratory Consortium — Since 1927, Great Lakes Science Center (GLSC) research has provided critical information for the sound management of Great Lakes fish populations and other important...

  19. Different purification methods and quality of sunflower biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Pighinelli, A.L.M.T.; Park, K.J. [Campinas State Univ., Sao Paulo (Brazil). School of Agricultural Engineering; Ferrari, R.A.; Miguel, A.M.R.O. [Food Technology Inst., Sao Paulo (Brazil)

    2010-07-01

    Biodiesel is derived from triacylglycerides and is produced primarily through transesterification, a chemical reaction of vegetable oils with alcohol, methanol or ethanol. The cost of raw material should be considered since 85 per cent of production cost is related to vegetable oil. The purpose of this study was to evaluate oil expression of sunflower seed. It also examined the sunflower crude oil as a raw material for biodiesel by transesterification in both laboratory and pilot scale studies. Three different biodiesel purification methods were examined. The best result for oil expelling (68.4 per cent) at the experimental stage was obtained for seeds with a moisture content of 6.9 per cent at 25 degrees C and at a screw speed of 114 rpm. For biodiesel production at the laboratory scale, the best result for oil expelling was 87.5 per cent. It was obtained with an ethanol:oil molar ratio of 4.7:1 and with a 4.42 per cent catalyst concentration related to the quantity of oil that had to be transesterified. The experimental condition was applied at a bigger scale with a batch stirred tank reactor. For purification with washing, the biodiesel yield was 84.2 per cent. Purification with silica resulted in a yield of 84.6 per cent. A better quality biofuel was obtained through distillation of biodiesel.

  20. Generational differences of baccalaureate nursing students' preferred teaching methods and faculty use of teaching methods

    Science.gov (United States)

    Delahoyde, Theresa

    Nursing education is experiencing a generational phenomenon with student enrollment spanning three generations. Classrooms of the 21st century include the occasional Baby Boomer and a large number of Generation X and Generation Y students. Each of these generations has its own unique set of characteristics that have been shaped by values, trends, behaviors, and events in society. These generational characteristics create vast opportunities to learn, as well as challenges. One such challenge is the use of teaching methods that are congruent with nursing student preferences. Although there is a wide range of studies conducted on student learning styles within the nursing education field, there is little research on the preferred teaching methods of nursing students. The purpose of this quantitative, descriptive study was to compare the preferred teaching methods of multi-generational baccalaureate nursing students with faculty use of teaching methods. The research study included 367 participants; 38 nursing faculty and 329 nursing students from five different colleges within the Midwest region. The results of the two-tailed t-test found four statistically significant findings between Generation X and Y students and their preferred teaching methods including; lecture, listening to the professor lecture versus working in groups; actively participating in group discussion; and the importance of participating in group assignments. The results of the Analysis of Variance (ANOVA) found seventeen statistically significant findings between levels of students (freshmen/sophomores, juniors, & seniors) and their preferred teaching methods. Lecture was found to be the most frequently used teaching method by faculty as well as the most preferred teaching method by students. Overall, the support for a variety of teaching methods was also found in the analysis of data.

  1. Theory of difference equations numerical methods and applications

    CERN Document Server

    Lakshmikantham, Vangipuram

    1988-01-01

    In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank mat

  2. Preparation of n-tetradecane-containing microcapsules with different shell materials by phase separation method

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Rui [Department of Chemical Engineering, Tsinghua University, Beijing (China); Zhang, Yan; Zhang, Qingwu [Department of Chemical Engineering, China University of Mining and Technology, Beijing (China); Wang, Xin; Zhang, Yinping [Department of Building Science, Tsinghua University, Beijing (China)

    2009-10-15

    Microcapsules for thermal energy storage and heat-transfer enhancement have attracted great attention. Microencapsulation of n-tetradecane with different shell materials was carried out by phase separation method in this paper. Acrylonitrile-styrene copolymer (AS), acrylonitrile-styrene-butadiene copolymer (ABS) and polycarbonate (PC) were used as the shell materials. The structures, morphologies and the thermal capacities of the microcapsules were characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The ternary phase diagrams showed the potential encapsulation capabilities of the three shell materials. The effects of the shell/core ratio and the molecular weight of the shell material on the encapsulation efficiency and the thermal capacity of the microcapsules were also discussed. Microcapsules with melting enthalpy > 100 J/g, encapsulation efficiency 66-75%, particle size<1 {mu}m were obtained for all three shell materials. (author)

  3. A generic method for automatic translation between input models for different versions of simulation codes

    International Nuclear Information System (INIS)

    Serfontein, Dawid E.; Mulder, Eben J.; Reitsma, Frederik

    2014-01-01

    A computer code was developed for the semi-automatic translation of input models for the VSOP-A diffusion neutronics simulation code to the format of the newer VSOP 99/05 code. In this paper, this algorithm is presented as a generic method for producing codes for the automatic translation of input models from the format of one code version to another, or even to that of a completely different code. Normally, such translations are done manually. However, input model files, such as for the VSOP codes, often are very large and may consist of many thousands of numeric entries that make no particular sense to the human eye. Therefore the task, of for instance nuclear regulators, to verify the accuracy of such translated files can be very difficult and cumbersome. This may cause translation errors not to be picked up, which may have disastrous consequences later on when a reactor with such a faulty design is built. Therefore a generic algorithm for producing such automatic translation codes may ease the translation and verification process to a great extent. It will also remove human error from the process, which may significantly enhance the accuracy and reliability of the process. The developed algorithm also automatically creates a verification log file which permanently record the names and values of each variable used, as well as the list of meanings of all the possible values. This should greatly facilitate reactor licensing applications

  4. A generic method for automatic translation between input models for different versions of simulation codes

    Energy Technology Data Exchange (ETDEWEB)

    Serfontein, Dawid E., E-mail: Dawid.Serfontein@nwu.ac.za [School of Mechanical and Nuclear Engineering, North West University (PUK-Campus), PRIVATE BAG X6001 (Internal Post Box 360), Potchefstroom 2520 (South Africa); Mulder, Eben J. [School of Mechanical and Nuclear Engineering, North West University (South Africa); Reitsma, Frederik [Calvera Consultants (South Africa)

    2014-05-01

    A computer code was developed for the semi-automatic translation of input models for the VSOP-A diffusion neutronics simulation code to the format of the newer VSOP 99/05 code. In this paper, this algorithm is presented as a generic method for producing codes for the automatic translation of input models from the format of one code version to another, or even to that of a completely different code. Normally, such translations are done manually. However, input model files, such as for the VSOP codes, often are very large and may consist of many thousands of numeric entries that make no particular sense to the human eye. Therefore the task, of for instance nuclear regulators, to verify the accuracy of such translated files can be very difficult and cumbersome. This may cause translation errors not to be picked up, which may have disastrous consequences later on when a reactor with such a faulty design is built. Therefore a generic algorithm for producing such automatic translation codes may ease the translation and verification process to a great extent. It will also remove human error from the process, which may significantly enhance the accuracy and reliability of the process. The developed algorithm also automatically creates a verification log file which permanently record the names and values of each variable used, as well as the list of meanings of all the possible values. This should greatly facilitate reactor licensing applications.

  5. Preliminary comparison of different reduction methods of graphene ...

    Indian Academy of Sciences (India)

    diverse applications and developing a simple, green, and efficient method for the mass production of ... properties of graphene have driven the search to find methods ... Chemical reduction of GO sheets has been performed with ... efficient method for the mass production of graphene. 2. ... temperature was raised to 35.

  6. Comparative Study of Different Processing Methods for the ...

    African Journals Online (AJOL)

    The result of the two processing methods reduced the cyanide concentration to the barest minimum level required by World Health Organization (10mg/kg). The mechanical pressing-fermentation method removed more cyanide when compared to fermentation processing method. Keywords: Cyanide, Fermentation, Manihot ...

  7. Different Element Methods in Engineering Practice | Onah | Nigerian ...

    African Journals Online (AJOL)

    Presented is the most common element methods used for analysis in engineering. The methods are discussed in an overall and general manner so that engineers and scientists who are increasingly, called upon to use element methods to support and check their analyses and/or designs can appreciate the essential ...

  8. COMPARISON OF THE ENVIRONMENTAL IMPACT OF DIFFERENT METHODS OF MINING WASTE DISPOSAL TECHNOLOGY USING AHP METHOD

    Directory of Open Access Journals (Sweden)

    Justyna Kubicz

    2016-05-01

    Full Text Available Exploitation of tailing ponds sites for storing all types of waste materials creates multiple problems concerning waste disposal and the environmental impact of the waste. Tailing ponds waste may comprise e.g. flotation tailings from ore enrichment plants. Despite the fact that companies / corporations use state-of-the-art methods of extraction and processing of copper ore, and introduce modern systems of organization and production management, the area located closest to the reservoir is exposed to its negative effects. Many types of waste material are a valuable source of secondary raw materials which are suitable for use by various industries. Examples of such materials are mining waste (flotation tailings, usually neutral to the environment, whose quantities produced in the process of exploitation of minerals is sizeable. The article compares different technological methods of mining waste disposal using AHP method and their environmental impact.

  9. Water Quality and River Plume Monitoring in the Great Barrier Reef: An Overview of Methods Based on Ocean Colour Satellite Data

    Directory of Open Access Journals (Sweden)

    Michelle J. Devlin

    2015-09-01

    Full Text Available A strong driver of water quality change in the Great Barrier Reef (GBR is the pulsed or intermittent nature of terrestrial inputs into the GBR lagoon, including delivery of increased loads of sediments, nutrients, and toxicants via flood river plumes (hereafter river plumes during the wet season. Cumulative pressures from extreme weather with a high frequency of large scale flooding in recent years has been linked to the large scale reported decline in the health of inshore seagrass systems and coral reefs in the central areas of the GBR, with concerns for the recovery potential of these impacted ecosystems. Management authorities currently rely on remotely-sensed (RS and in situ data for water quality monitoring to guide their assessment of water quality conditions in the GBR. The use of remotely-sensed satellite products provides a quantitative and accessible tool for scientists and managers. These products, coupled with in situ data, and more recently modelled data, are valuable for quantifying the influence of river plumes on seagrass and coral reef habitat in the GBR. This article reviews recent remote sensing techniques developed to monitor river plumes and water quality in the GBR. We also discuss emerging research that integrates hydrodynamic models with remote sensing and in situ data, enabling us to explore impacts of different catchment management strategies on GBR water quality.

  10. Urban rural differences in diet, physical activity and obesity in India: are we witnessing the great Indian equalisation? Results from a cross-sectional STEPS survey

    Directory of Open Access Journals (Sweden)

    Jaya Prasad Tripathy

    2016-08-01

    Full Text Available Abstract Background The rising morbidity and mortality due to non-communicable diseases can be partly attributed to the urbanized lifestyle leading to unhealthy dietary practices and increasing physical levels of inactivity. The demographic and nutrition transition in India has also contributed to the emerging epidemic of non-communicable diseases in this country. In this context, there is limited information in India on dietary patterns, levels of physical activity and obesity. The aim of the present study was thus to assess the urban rural differences in dietary habits, physical activity and obesity in India. Methods A household survey was done in the state of Punjab, India in a multistage stratified sample of 5127 individuals using the WHO STEPS questionnaire. Results No rural urban difference was found in dietary practices and prevalence of overweight and obesity except the fact that a significantly higher proportion of respondents belonging to rural area (15.6 % always/often add salt before/when eating as compared to urban area (9.1 %. Overall 95.8 % (94.6–97.0 of participants took less than 5 servings of fruits and/or vegetables on average per day. No significant urban rural difference was noted in both sexes in all three domains of physical activity such as work, transport and recreation. However, rural females (19.1 % were found to be engaged in vigorous activity more than the urban females (6.3 %. Males reported high levels of physical activity in both the settings. Absence of recreational activity was reported by more than 95 % of the subjects. Higher prevalence of obesity (asian cut offs used was seen among urban females (34.3 % as compared to their rural counterparts (23.2 %. Abdominal obesity was found to be significantly higher among females in both the settings compared to males (p < 0.001. Conclusions Poor dietary practices and physical inactivity seems to fuel the non-communicable disease epidemic in India. Non

  11. Biodiversity and species-environment relationships of the demersal fish assemblage at the Great Meteor Seamount (subtropical NE Atlantic), sampled by different trawls

    DEFF Research Database (Denmark)

    Fock, H.; Uiblein, F.; Köster, Fritz

    2002-01-01

    , respectively, to 583.98 ind. m(-1) h(-1) in 1998. Gear effects and an effect of gear over time accounted for 47.1% and 20% of species variability. Further significant factors were time of day and habitat, while season was not significant. A total of 43 species was collected. Including supplementary species...... information, a grand total of 46 species was found associated with the Great Meteor Seamount. Diversity was higher in 1967 and 1970 (Shannon's diversity: H'=2.5 and 1.6) than in 1998 (H'=0.9). Species-environment relationships are discussed in terms of a sound-scattering layer-interception hypothesis, i...

  12. Assessment of four different methods for selecting biosurfactant ...

    African Journals Online (AJOL)

    Ariech

    2015-05-27

    May 27, 2015 ... different chemical structures and properties (Rone and. Rosenberg, 2001 ... enhanced oil recovery, transportation in pipelines, cleaning of oil .... Statistical analysis of the correlation between different tests. A general rank ...

  13. Great software debates

    CERN Document Server

    Davis, A

    2004-01-01

    The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

  14. Did the Great Recession Downsize Immigrants and Native-Born Americans Differently? Unemployment Differentials by Nativity, Race and Gender from 2007 to 2013 in the U.S.

    Directory of Open Access Journals (Sweden)

    Sharron Xuanren Wang

    2016-09-01

    Full Text Available We use data from the Current Population Survey from 2007 and 2013 to investigate demographic differentials in unemployment during the Great Recession in the U.S. Although our analysis is primarily exploratory and descriptive, our major research objective is to illuminate the unemployment differential between the foreign born and the native born. The findings indicate that during the height of the Great Recession, the foreign born had higher unemployment rates than the native born. However, this differential is statistically explained by their observed characteristics, such as race/ethnicity, gender, age and education. With the net of those variables and a few other demographic covariates, foreign born workers as an overall group actually had somewhat lower chances of being unemployed than native born workers. This finding is discussed in terms of the selectivity of immigrant workers and the possibility that they are somewhat more immediately dependent on having a job. After breaking down the foreign born into major racial/ethnic groups, the results suggest that foreign-born blacks and foreign-born Hispanics are particularly selective with the net of their observed characteristics. The possible sources of such differentials by race/ethnicity and by gender are discussed.

  15. High oleic sunflower biodiesel: quality control and different purification methods

    Directory of Open Access Journals (Sweden)

    Pighinelli, Anna L.M.T.

    2011-06-01

    Full Text Available The objective of the present work is to evaluate the production of biodiesel using ethanol and sunflower oil. The extraction of the sunflower oil was evaluated first. An experimental design was used to estimate the influence of the independent variables grain temperature (25º to 110ºC and expeller rotation (85 to 119rpm on the crude oil. The best result obtained was 68.38%, achieved with a rotation from 100 to 115rpm, grain temperature ranging from 25º to 30ºC and moisture content of around 7%. The next study consisted of transesterification, evaluating the influence of the ethanol, oil molar ratio and the catalyst concentration (sodium methylate on the ester-rich phase yield. The highest yield was 98.39% obtained with a molar ratio of 9:1 and 3% catalyst. An experiment was then carried out on a small reactor and the biodiesel produced was purified by three different methods: acidified water, silica and distillation. The quality aspects of the purified biodiesel samples were evaluated according to the Brazilian specifications for biodiesel, and distillation was shown to be the best method of purification.

    El objetivo del presente trabajo es evaluar la producción de biodiesel usando etanol y aceite de girasol. La extracción del aceite de girasol fue evaluada primero. Un diseño experimental fue usado para estimar la influencia de las variables independientes: temperatura del grano (25º a 110ºC y rotación del expeller (85 a 119 rpm en la obtención del aceite crudo. El mejor resultado obtenido fue un 68,38%, conseguido con una rotación de 100 a 115 rpm, una temperatura del grano de 25º a 30ºC y un contenido de humedad de alrededor del 7%. El siguiente estudio mediante transesterificación, evaluó la influencia de la relación molar etanol: aceite y concentración de catalizador (metilato sódico en el rendimiento de la fase rica en esteres. El rendimiento más alto fue 98,39% obtenido con una relación molar de 9.1 y 3% de

  16. Comparison of different methods for thoron progeny measurement

    International Nuclear Information System (INIS)

    Bi Lei; Zhu Li; Shang Bing; Cui Hongxing; Zhang Qingzhao

    2009-01-01

    Four popular methods for thoron progeny measurement were discussed, including the aspects of detector,principle, precondition, calculation advantages and disadvantages. Comparison experiments were made in mine and houses with high background in Yunnan Province. Since indoor thoron progeny changes with time obviously and with no rule, α track method is recommended in the area of radiation protection for environmental detection and assessment. (authors)

  17. METHODS FOR DETERMINATION OF THE OPTIMUM EXPLOSIVES IN DIFFERENT ROCKS

    Directory of Open Access Journals (Sweden)

    Josip Krsnik

    1989-12-01

    Full Text Available The most appropriate explosives required for blasting of the particular types of rocks were established by test blasting method with linear burden increase. By the same method the optimum magnitudes of deep-holes blasting were established (the paper is published in Croatian.

  18. Correlation between different methods of intra- abdominal pressure ...

    African Journals Online (AJOL)

    This study aimed to determine the correlation between transvesical ... circumstances may arise where this method is not viable and alternative methods ..... The polycompartment syndrome: A concise state-of-the- art review. ... hypertension in a mixed population of critically ill patients: A multiple-center epidemiological study.

  19. Evaluation of Different Methods for Considering Bar-Concrete ...

    African Journals Online (AJOL)

    theory, but the perfect bond assumption has been removed. The precision of the proposed method in considering the real nonlinear behavior of reinforced concrete frames has been compared to the precision of two other suggested methods for considering bond-slip effect in layer model. Among the capabilities of this ...

  20. Consumptive use of upland rice as estimated by different methods

    International Nuclear Information System (INIS)

    Chhabda, P.R.; Varade, S.B.

    1985-01-01

    The consumptive use of upland rice (Oryza sativa Linn.) grown during the wet season (kharif) as estimated by modified Penman, radiation, pan-evaporation and Hargreaves methods showed a variation from computed consumptive use estimated by the gravimetric method. The variability increased with an increase in the irrigation interval, and decreased with an increase in the level of N applied. The average variability was less in pan-evaporation method, which could reliably be used for estimating water requirement of upland rice if percolation losses are considered

  1. of different weed control methods on Weed infestation, growth

    African Journals Online (AJOL)

    thinkexploitsint'l

    This weed control method also resulted in significantly better growth and ... proper management, it is possible to obtain 2,500 kg ha-1 (Onwueme and Sinha, 1991). ... however, time consuming, labour – intensive, strenuous and generally ...

  2. Activity measurements of {sup 55}Fe by two different methods

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, P.A.L. da; Iwahara, A.; Silva, C.J. da; Poledna, R.; Loureiro, J.S.; Silva, M.A.L. da, E-mail: palcruz@ird.gov.br [Instituto de Radioproteção e Dosimetria (LNMRI/IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab. Nacional de Metrologia das Radiações Ionizantes; Ruzzarin, Anelise [Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2017-07-01

    A calibrated germanium detector and CIEMAT/NIST liquid scintillation method were used in the standardization of solution of {sup 55}Fe coming from a key-comparison BIPM. Commercial HISAFE'3 cocktails were used in source preparation for activity measurements in CIEMAT/NIST method. Measurements were performed in Liquid Scintillation Counter. In the germanium counting method standard point sources were prepared for obtaining atomic number versus efficiency curve of the detector in order to obtain the efficiency of 5.9 keV KX-ray of {sup 55}Fe by interpolation. The activity concentrations obtained were 508.2 ± 3.56 and 510.0 ± 16.20 kBq/g, respectively for CIEMAT/NIST and germanium methods. (author)

  3. Method to deterministically study photonic nanostructures in different experimental instruments

    NARCIS (Netherlands)

    Husken, B.H.; Woldering, L.A.; Blum, Christian; Tjerkstra, R.W.; Vos, Willem L.

    2009-01-01

    We describe an experimental method to recover a single, deterministically fabricated nanostructure in various experimental instruments without the use of artificially fabricated markers, with the aim to study photonic structures. Therefore, a detailed map of the spatial surroundings of the

  4. Equivalence of ten different discounted cash flow valuation methods

    OpenAIRE

    Fernandez, Pablo

    2004-01-01

    This paper shows that ten methods of company valuation using discounted cash flows (WACC; equity cash flow; capital cash flow; adjusted present value; residual income; EVA; business's risk-adjusted equity cash flow; business's risk-adjusted free cash flow; risk-free-adjusted equity cash flow; and risk-free-adjusted free cash flow) always give the same value when identical assumptions are used. This result is logical, since all the methods analyze the same reality using the same assumptions; t...

  5. Characteristic of nanoparticles generated from different nano-powders by using different dispersion methods

    International Nuclear Information System (INIS)

    Tsai, Chuen-Jinn; Lin, Guan-Yu; Liu, Chun-Nan; He, Chi-En; Chen, Chun-Wan

    2012-01-01

    A standard rotating drum with a modified sampling train (RD), a vortex shaker (VS), and a SSPD (small-scale powder disperser) were used to investigate the emission characteristics of nano-powders, including nano-titanium dioxide (nano-TiO 2 , primary diameter: 21 nm), nano-zinc oxide (nano-ZnO, primary diameter: 30–50 nm), and nano-silicon dioxide (nano-SiO 2 , primary diameter: 10–30 nm). A TSI SMPS (scanning mobility particle sizer), a TSI APS (aerodynamic particle sizer), and a MSP MOUDI (micro-orifice uniform deposit impactor) were used to measure the number and mass distributions of generated particles. Significant differences in specific number and mass concentration or distributions were found among different methods and nano-powders with the most specific number and mass concentration and the smallest particles being generated by the most energetic SSPD, followed by VS and RD. Near uni-modal number or mass distributions were observed for the SSPD while bi-modal number or mass distributions existed for nano-powders except nano-SiO 2 which also exhibited bimodal mass distributions. The 30-min average results showed that the mass median aerodynamic diameter (MMAD) and number median diameter (NMD) of the SSPD ranged 1.1–2.1 μm and 166–261 nm, respectively, for all three nano-powders, which were smaller than those of the VS (MMAD: 3.3–6.0 μm and NMD: 156–462 nm), and the RD (MMAD: 5.2–11.2 μm and NMD: 198–479 nm). For nano-particles (electric mobility diameter < 100 nm), specific mass concentrations were nearly negligible for all three nano-powders and test methods. Specific number concentrations of nano-particles were low for the RD tester but were elevated when more energetic VS and SSPD testers were used. The quantitative size and concentration data obtained in this study is useful to elucidate the field emission and personal exposure data in the future provided that particle loss in the generation system is carefully assessed.

  6. Method for adjusting warp measurements to a different board dimension

    Science.gov (United States)

    William T. Simpson; John R. Shelly

    2000-01-01

    Warp in lumber is a common problem that occurs while lumber is being dried. In research or other testing programs, it is sometimes necessary to compare warp of different species or warp caused by different process variables. If lumber dimensions are not the same, then direct comparisons are not possible, and adjusting warp to a common dimension would be desirable so...

  7. Effects of different chemical materials and cultural methods on ...

    African Journals Online (AJOL)

    reading 6

    2011-10-27

    Oct 27, 2011 ... dry matter accumulation at different growing stages in 2004-2005, yield and yield components in harvest in both years were deter- mined. The data were subjected to analyses of variance (ANOVA) to determine the effects of treatments, and the mean differences were adjudged by Duncan multiple range test ...

  8. Lattice Boltzmann Method of Different BGA Orientations on I-Type Dispensing Method.

    Directory of Open Access Journals (Sweden)

    Aizat Abas

    Full Text Available This paper studies the three dimensional (3D simulation of fluid flows through the ball grid array (BGA to replicate the real underfill encapsulation process. The effect of different solder bump arrangements of BGA on the flow front, pressure and velocity of the fluid is investigated. The flow front, pressure and velocity for different time intervals are determined and analyzed for potential problems relating to solder bump damage. The simulation results from Lattice Boltzmann Method (LBM code will be validated with experimental findings as well as the conventional Finite Volume Method (FVM code to ensure highly accurate simulation setup. Based on the findings, good agreement can be seen between LBM and FVM simulations as well as the experimental observations. It was shown that only LBM is capable of capturing the micro-voids formation. This study also shows an increasing trend in fluid filling time for BGA with perimeter, middle empty and full orientations. The perimeter orientation has a higher pressure fluid at the middle region of BGA surface compared to middle empty and full orientation. This research would shed new light for a highly accurate simulation of encapsulation process using LBM and help to further increase the reliability of the package produced.

  9. A coarse-mesh nodal method-diffusive-mesh finite difference method

    International Nuclear Information System (INIS)

    Joo, H.; Nichols, W.R.

    1994-01-01

    Modern nodal methods have been successfully used for conventional light water reactor core analyses where the homogenized, node average cross sections (XSs) and the flux discontinuity factors (DFs) based on equivalence theory can reliably predict core behavior. For other types of cores and other geometries characterized by tightly-coupled, heterogeneous core configurations, the intranodal flux shapes obtained from a homogenized nodal problem may not accurately portray steep flux gradients near fuel assembly interfaces or various reactivity control elements. This may require extreme values of DFs (either very large, very small, or even negative) to achieve a desired solution accuracy. Extreme values of DFs, however, can disrupt the convergence of the iterative methods used to solve for the node average fluxes, and can lead to a difficulty in interpolating adjacent DF values. Several attempts to remedy the problem have been made, but nothing has been satisfactory. A new coarse-mesh nodal scheme called the Diffusive-Mesh Finite Difference (DMFD) technique, as contrasted with the coarse-mesh finite difference (CMFD) technique, has been developed to resolve this problem. This new technique and the development of a few-group, multidimensional kinetics computer program are described in this paper

  10. Solving nonlinear evolution equation system using two different methods

    Science.gov (United States)

    Kaplan, Melike; Bekir, Ahmet; Ozer, Mehmet N.

    2015-12-01

    This paper deals with constructing more general exact solutions of the coupled Higgs equation by using the (G0/G, 1/G)-expansion and (1/G0)-expansion methods. The obtained solutions are expressed by three types of functions: hyperbolic, trigonometric and rational functions with free parameters. It has been shown that the suggested methods are productive and will be used to solve nonlinear partial differential equations in applied mathematics and engineering. Throughout the paper, all the calculations are made with the aid of the Maple software.

  11. Evaluation of different methods to overcome in vitro seed dormancy ...

    African Journals Online (AJOL)

    SAM

    2014-09-03

    Sep 3, 2014 ... Seeds from yellow passion fruit (Passiflora edulis Sims) present dormancy imposed by the seed-coat. The present study aimed to evaluate some methods to overcome dormancy of seeds from P. edulis grown under in vitro conditions. The experimental design was completely randomized in factorial scheme ...

  12. Evaluation of two different respiratory physiotherapy methods after ...

    African Journals Online (AJOL)

    Introduction: Although the methods used in thoracic surgery have been developing rapidly over the last five decades, postoperative pulmonary complications are seen in this field more than in other surgical branches. We aimed at comparing the acute effects of incentive spirometry (IS) and breathing retraining exercises by ...

  13. Assessment of four different methods for selecting biosurfactant ...

    African Journals Online (AJOL)

    ... and ease of use to screen biosurfactant producing six extremely halophilic bacteria isolated from saline soil of Chott El Hodna-M'sila (Algeria), which is considered as a thalassohaline environment. Results from screening methods revealed that, CH2 and CH5 strains are potential candidates for biosurfactant production.

  14. An Evaluation of the Efficiency of Different Hygienisation Methods

    Science.gov (United States)

    Zrubková, M.

    2017-10-01

    The aim of this study is to evaluate the efficiency of hygienisation by pasteurisation, temperature-phased anaerobic digestion and sludge liming. A summary of the legislation concerning sludge treatment, disposal and recycling is included. The hygienisation methods are compared not only in terms of hygienisation efficiency but a comparison of other criteria is also included.

  15. Methods of exploitation of different types of uranium deposits

    International Nuclear Information System (INIS)

    2000-09-01

    Deposits are mined using three broad types of mining methods: open pit, underground and in situ leaching. This publication addresses all aspects of mining and milling methods for several types of deposits and provides information to assist in the selection process of methods and also considers what actions must be taken into account for obtaining regulatory approvals for a project and for final decommissioning and reclamation of a project. The objective of this publication is to provide a process of selections of methods for mining engineers and managers involved in modernising ongoing operations or considering opening new operations. Several practical examples are given. These guidelines can be consulted and used in many countries involved in uranium mining and milling operations. The examples where costs are given can also be adjusted to specific economic conditions of various countries. The authors are from four uranium producing countries. They bring diversified experience for all types of mining and milling operations from tile opening of a mine to the decommissioning of the complete operation

  16. Methods of exploitation of different types of uranium deposits

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Deposits are mined using three broad types of mining methods: open pit, underground and in situ leaching. This publication addresses all aspects of mining and milling methods for several types of deposits and provides information to assist in the selection process of methods and also considers what actions must be taken into account for obtaining regulatory approvals for a project and for final decommissioning and reclamation of a project. The objective of this publication is to provide a process of selections of methods for mining engineers and managers involved in modernising ongoing operations or considering opening new operations. Several practical examples are given. These guidelines can be consulted and used in many countries involved in uranium mining and milling operations. The examples where costs are given can also be adjusted to specific economic conditions of various countries. The authors are from four uranium producing countries. They bring diversified experience for all types of mining and milling operations from tile opening of a mine to the decommissioning of the complete operation.

  17. Evaluation of two different respiratory physiotherapy methods after ...

    African Journals Online (AJOL)

    2015-09-01

    Sep 1, 2015 ... Methods: Patients were randomized into two groups as spirometry and physiotherapist. Combined .... thoracic surgery, and efficiency of pain control, shoulder ... coughing, posture exercises and combined respiration exercises ..... non‑small cell lung cancer in the elderly: A nested case‑control study. Ann.

  18. Comparison of different methods to investigate postprandial lipaemia

    NARCIS (Netherlands)

    van Oostrom, A. J. H. H. M.; Alipour, A.; Sijmonsma, T. P.; Verseyden, C.; Dallinga-Thie, G. M.; Plokker, H. W. M.; Castro Cabezas, M.

    2009-01-01

    Postprandial hyperlipidaemia has been associated with coronary artery disease (CAD). We investigated which of the generally used methods to test postprandial lipaemia differentiated best between patients with premature CAD (50 +/- 4 years, n=20) and healthy controls. Furthermore, the effects of

  19. ORIGINAL ARTICLE Fitted-Stable Finite Difference Method for ...

    African Journals Online (AJOL)

    Gemechis

    two point boundary value problems with the boundary layer at one end (left or right) ... scheme (SCD Method) and its value is obtained using the theory of singular ..... Eq. (15) at the point. N iih xxi. , ,2 ,1 ,0 ,.. = = = and taking the limit as. 0. →.

  20. Methods for comparative risk assessment of different energy sources

    International Nuclear Information System (INIS)

    1992-10-01

    The environmental and health aspects of different energy systems, particularly those associated with the generation of electricity, are emerging as significant issues for policy formulation and implementation. This, together with the growing need of many countries to define their energy programmes for the next century, has provided the basis for a renewed interest in the comparative risk assessment of different energy sources (fossil, nuclear, renewables). This document is the outcome of a Specialists Meeting on the procedural and methodological issues associated with comparative health and environmental risks of different energy sources. After an introductory chapter outlining the issues under consideration the papers presented at the Meeting, which have been indexed separately, are given. Refs, figs and tabs

  1. Method and apparatus for physical separation of different sized nanostructures

    Science.gov (United States)

    Roberts, Christopher B.; Saunders, Steven R.

    2012-07-10

    The present application provides apparatuses and methods for the size-selective fractionation of ligand-capped nanoparticles that utilizes the tunable thermophysical properties of gas-expanded liquids. The nanoparticle size separation processes are based on the controlled reduction of the solvent strength of an organic phase nanoparticle dispersion through increases in concentration of the antisolvent gas, such as CO.sub.2, via pressurization. The method of nanomaterial separation contains preparing a vessel having a solvent and dispersed nanoparticles, pressurizing the chamber with a gaseous antisolvent, and causing a first amount of the nanoparticles to precipitate, transporting the solution to a second vessel, pressurizing the second vessel with the gaseous antisolvent and causing further nanoparticles to separate from the solution.

  2. Different cultivation methods to acclimatise ammonia-tolerant methanogenic consortia

    DEFF Research Database (Denmark)

    Tian, Hailin; Fotidis, Ioannis; Mancini, Enrico

    2017-01-01

    reactors (i.e. batch, fed-batch and continuous stirred-tank reactors (CSTR)) operated at mesophilic (37°C) and thermophilic (55°C) conditions were assessed, based on methane production efficiency, incubation time, TAN/FAN (total ammonium nitrogen/free ammonia nitrogen) levels and maximum methanogenic...... activity. Overall, fed-batch cultivation was clearly the most efficient method compared to batch and CSTR. Specifically, by saving incubation time up to 150%, fed-batch reactors were acclimatised to nearly 2-fold higher FAN levels with a 37%-153% methanogenic activity improvement, compared to batch method....... Meanwhile, CSTR reactors were inhibited at lower ammonia levels. Finally, specific methanogenic activity test showed that hydrogenotrophic methanogens were more active than aceticlastic methanogens in all FAN levels above 540 mg NH3-N L-1....

  3. [Detection of ciguatoxins: advantages and drawbacks of different biological methods].

    Science.gov (United States)

    Boydron-Le Garrec, Raphaële; Benoit, Evelyne; Sauviat, Martin-Pierre; Laurent, Dominique

    2005-01-01

    Ciguatera is a seafood intoxication that results from ingestion of reef fish contaminated with ciguatoxins at levels orally toxic for humans. Precursors of those toxins, gambiertoxins, are produced by benthic dinoflagellates (genus Gambierdiscus), and then accumulated and biotransformed by herbivorous and carnivorous fishes into ciguatoxins, more toxic for humans. In the absence of specific treatment, that disease remains a health problem with otherwise adverse socio-economic impacts. Thus a cost-effective means of detecting ciguatoxins in fish has long been searched for. Many assays have been developed, including in vivo, in vitro, chemical or immunochemical approaches. This review focuses on some biological methods, from the well-standardised mouse assay to the specific radio-labelled ligand binding assay that is performed on rat brain synaptosomes. In addition to the mouse, the chick and the mongoose were still recently used, in particular for preliminary tests before ciguatoxin extraction from fish, since assays in these animals can directly assay the whole flesh. In contrast, various other in vivo methods, such as the kitten, mosquito and diptera larvae assays, were abandoned despite their interesting results. Finally, the mouse neuroblastoma and rat brain synaptosome assays, carried out in vitro as alternative approaches to animal-using assays, are highly sensitive and much more specific than the in vivo methods to detect ciguatoxins.

  4. Methodological proposal for environmental impact evaluation since different specific methods

    International Nuclear Information System (INIS)

    Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

    1999-01-01

    Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

  5. Biological effects of three different shoreline cleanup methods

    Energy Technology Data Exchange (ETDEWEB)

    Mattsson, J.; Lethinen, C.; Linden, O.

    1981-06-01

    In order to simulate a real oil spill the shore of a small island in the Baltic proper was treated with a weathered crude oil. The aim of the study was to investigate and compare environmental impact of some shoreline cleanup techniques as well as the effectiveness of these methods. Hot water was the quickest cleanup method, whereas cleaning with a solvent took twice as much time and mechanical recovery three and a half time as much. The hot water treatment resulted in the smallest amounts of oil left in the soil compared to the two other methods, where two to three times as much was left. The oil content in sedimenting material and in mussels was highest outside the area cleaned with hot water. The oil content in mussel tissues increased 75 times after cleaning and the sediment contained about twice as much oil as outside the other areas. The vegetation on all four oiled areas was considerably reduced and the soil fauna was completely eliminated. Since no animals were found on the four oiled areas, not even on the untreated area, it appeared to be the oil itself that caused this effect. The number of animals caught with pitfall traps decreased after oiling and cleanup to between 10-40 % of the original amount. The results from the investigation of the fauna in the Cladophora-belt do not indicate any effects so far.

  6. High-order finite-difference methods for Poisson's equation

    NARCIS (Netherlands)

    van Linde, Hendrik Jan

    1971-01-01

    In this thesis finite-difference approximations to the three boundary value problems for Poisson’s equation are given, with discretization errors of O(H^3) for the mixed boundary value problem, O(H^3 |ln(h)| for the Neumann problem and O(H^4)for the Dirichlet problem respectively . First an operator

  7. Back-transformation of treatment differences - an approximate method

    DEFF Research Database (Denmark)

    Laursen, Rikke Pilmann; Dalskov, Stine-Mathilde; Damsgaard, Camilla Trab

    2014-01-01

    Background/Objectives:Transformation of outcomes is frequently used in the analysis of studies in clinical nutrition. However, back-transformation of estimated treatment means and differences is complicated by the nonlinear nature of the transformations. It is not straightforward to obtain an est...... publication, 11 December 2013; doi:10.1038/ejcn.2013.259....

  8. A new sonochemical method for preparation of different ...

    Indian Academy of Sciences (India)

    Administrator

    The effects of different parameters such as sulphur source, solvent, power of irradia- tion and reaction ... temperature of about 5000 °C and pressure of over. 1800 kPa that these .... its half intensity maximum, K the shape factor, which usually takes a .... J–V curves give key parameters to explain solar cell characterization ...

  9. A finite difference method for free boundary problems

    KAUST Repository

    Fornberg, Bengt

    2010-01-01

    Fornberg and Meyer-Spasche proposed some time ago a simple strategy to correct finite difference schemes in the presence of a free boundary that cuts across a Cartesian grid. We show here how this procedure can be combined with a minimax

  10. Development of DNA-based Identification methods to track the species composition of fish larvae within nearshore areas of the Great Lakes

    Science.gov (United States)

    The ability to track the identity and abundance of larval fish, which are ubiquitous during spawning season, may lead to a greater understanding of fish species distributions in Great Lakes nearshore areas including early-detection of invasive fish species before they become esta...

  11. Microstructure and cross-sectional shape of limb bones in Great Horned Owls and Red-tailed Hawks: how do these features relate to differences in flight and hunting behavior?

    Science.gov (United States)

    Marelli, Crystal A; Simons, Erin L R

    2014-01-01

    The Red-tailed Hawk and Great Horned Owl are two species of raptor that are similar in body size, diet, and habitat. Both species use their hindlimbs during hunting, but differ in foot morphology, how they approach and immobilize prey, and the average size of prey captured. They also differ in primary flight style: the Red-tailed Hawk uses static soaring and the Great Horned Owl uses flap-gliding. The objectives of this study were to characterize the microstructure and cross-sectional shape of limb bones of these species and examine the relationship with flight and hunting behaviors. The mid-shaft of six limb bones from six individuals of each species was sampled. The degree of bone laminarity (proportion of circular primary vascular canals) and cross-sectional geometric parameters were calculated. In both species, the humerus and femur exhibited features that suggest high resistance to torsional loading, whereas the tibiotarsus and phalanges had a shape more likely to resist compression and bending in a specific plane. The femur of the Red-tailed Hawk exhibited higher laminarity and larger polar moment of area than that of the Great Horned Owl. The tibiotarsus was more elliptical than that of the Great Horned Owl. The hawk approaches prey from a more horizontal axis, takes prey of greater mass, and is more likely to pursue prey on the ground, which could potentially be causing more torsional loads on the femur and bending loads on the tibiotarsus. In addition, differences in polar moment of area of the phalanges between the species could relate to differences in foot morphology or digit length. The humerus and ulna of the flap-gliding Great Horned Owl are more elliptical than the static soaring Red-tailed Hawk, a shape that may better resist the bending loads associated with a larger amount of flapping.

  12. A finite difference method for free boundary problems

    KAUST Repository

    Fornberg, Bengt

    2010-04-01

    Fornberg and Meyer-Spasche proposed some time ago a simple strategy to correct finite difference schemes in the presence of a free boundary that cuts across a Cartesian grid. We show here how this procedure can be combined with a minimax-based optimization procedure to rapidly solve a wide range of elliptic-type free boundary value problems. © 2009 Elsevier B.V. All rights reserved.

  13. Stress responses in lambs castrated with three different methods

    Directory of Open Access Journals (Sweden)

    Paola Sandra Nicolussi

    2010-01-01

    Full Text Available The present work was conducted to evaluate the animal response to stress in lambs caused by three different castration techniques. Forty-six male lambs aged 4-5 months were randomly allocated to one of four groups including Burdizzo (B, scrotal ablation (SA, orchiectomy (OR and control handling (H. Local anaesthesia (lidocaine 2% was administered in both spermatic cords and the scrotal neck of lambs before each treatment. Blood samples were collected at -30, -10, +1, +20, +40, +60, +120, and +180 minutes. Serum cortisol concentrations were determined using a competitive immunoassay and the area under the curve (AUC was calculated for each lamb. The following biochemical parameters were assayed for each animal at each time point: alanine aminotransferase (ALT, aspartate aminotransferase (AST, lactate dehydrogenase (LDH, creatine kinase (CK and glucose (GLU. The time needed for total lesion resolution and weight gain of each animal was recorded. Orchiectomy elicits the greatest cortisol response, significantly greater than that seen in similarly handled controls (P≤0.01, Burdizzo and scrotal ablation groups (P≤0.05. The serum cortisol AUC was higher in the scrotal ablation group (P≤0.05 than controls, but lower than in the orchiectomy group (P≤0.05. The Burdizzo group didn’t differ from controls. Serum glucose levels of the castrated lambs differed significantly from the control group, following a trend similar to cortisol. No change was seen in ALT, AST, LDH or CK. No difference in weight gain was seen among the groups. Our results suggest that use of the Burdizzo is the preferable castration technique for adult lambs, while scrotal ablation is a valid surgical alternative to orchiectomy and permits more rapid wound healing that is ideal for extensive management where flocks are not under close observation.

  14. Different cultivation methods to acclimatise ammonia-tolerant methanogenic consortia.

    Science.gov (United States)

    Tian, Hailin; Fotidis, Ioannis A; Mancini, Enrico; Angelidaki, Irini

    2017-05-01

    Bioaugmentation with ammonia tolerant-methanogenic consortia was proposed as a solution to overcome ammonia inhibition during anaerobic digestion process recently. However, appropriate technology to generate ammonia tolerant methanogenic consortia is still lacking. In this study, three basic reactors (i.e. batch, fed-batch and continuous stirred-tank reactors (CSTR)) operated at mesophilic (37°C) and thermophilic (55°C) conditions were assessed, based on methane production efficiency, incubation time, TAN/FAN (total ammonium nitrogen/free ammonia nitrogen) levels and maximum methanogenic activity. Overall, fed-batch cultivation was clearly the most efficient method compared to batch and CSTR. Specifically, by saving incubation time up to 150%, fed-batch reactors were acclimatised to nearly 2-fold higher FAN levels with a 37%-153% methanogenic activity improvement, compared to batch method. Meanwhile, CSTR reactors were inhibited at lower ammonia levels. Finally, specific methanogenic activity test showed that hydrogenotrophic methanogens were more active than aceticlastic methanogens in all FAN levels above 540mgNH 3 -NL -1 . Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Finite element and finite difference methods in electromagnetic scattering

    CERN Document Server

    Morgan, MA

    2013-01-01

    This second volume in the Progress in Electromagnetic Research series examines recent advances in computational electromagnetics, with emphasis on scattering, as brought about by new formulations and algorithms which use finite element or finite difference techniques. Containing contributions by some of the world's leading experts, the papers thoroughly review and analyze this rapidly evolving area of computational electromagnetics. Covering topics ranging from the new finite-element based formulation for representing time-harmonic vector fields in 3-D inhomogeneous media using two coupled sca

  16. [Comparative effectiveness of different treatment methods of liver failure].

    Science.gov (United States)

    Kutepov, D E; Vershinina, M G; Pasechnik, I N; Sal'nikov, P S

    2014-01-01

    It was analyzed the results of treatment of 217 patients (139 men, 78 women) with chronic liver failure in case of liver cirrhosis of various etiology for study of degree of hepatic encephalopathyregression. All patients were divided into 3 groups. In the first group the drug therapy was used. In the second group additionallyplasma exchange was performed, in the third group - alsomolecular absorbent recirculating system was used (effectiveness of MARS-therapy).The results showed that the use of extracorporeal treatment techniques can effectively reduce the severity of hepatic encephalopathy in patients with liver cirrhosis. MARS-therapy improved the neurological status of patientsmore significantly in this case. It is considered that the inclusion of MARS-therapy in the combined treatment of patients leads to a significant reduction of hepatic encephalopathyseverity (1-2 points), in comparison with other methods of treatment.

  17. Methods to incorporate different data types in the characterization process

    International Nuclear Information System (INIS)

    Gomez-Hernandez, J.J.; Carrera, J.; Medina, A.

    1998-01-01

    Spatial variability of the hydrodynamic parameters controlling radionuclide transport causes large uncertainties in the predictions. Methods have been devised to analyze spatial variability of these parameters and to model the uncertainty of the predictions. However, the final use given to large portions of the total data collected is minimal. Techniques have been developed and implemented with the aim of incorporating all types of data in the characterization of the spatial variability of conductivity/transmissivity. This serves to reduce the uncertainty in the predictions and to increase the confidence in the model. Types of data used in models include: geometric information, transmissivity data, piezometric data, geological/geophysical information tracer test concentration data, and isotopic data. (R.P.)

  18. EFFECT OF DIFFERENT PHYSICAL ACTIVITY TRAINING METHODS ON OVERWEIGHT ADOLESCENTS

    Directory of Open Access Journals (Sweden)

    Shohreh Ghatrehsamani

    2010-11-01

    Full Text Available BACKGROUND: In view of the growing trend of obesity around the world, including in our country, and the effect of reduced physical activity in increasing the incidence of obesity and overweight in children and adolescents and limitations of families in providing transport for their children to attend exercise classes, as well as time limitations of students in taking part in these classes, accessing appropriate methods for presenting physical activity training seems essential.    METHODS: This non-pharmacological clinical trial was performed during six months from May to November 2007 on 105 children and adolescents aged 6-18 years with obesity, randomly assigned to 3 groups of thirty-five. Nutrition and treatment behavior were the same in all groups, but physical activity training in the first group was taking part in physical activity training classes twice a week, in the second group by providing a training CD, and in the third group via face-to-face training. Before and after the intervention, anthropometric indicators were measured and recorded.    RESULTS: Mean body mass index (BMI of participants in group attended physical activity training classes, and in the group undergone training with CD, after the interventions was significantly lower than that before the intervention.     CONCLUSION: Our findings demonstrated that training using CDs can also be effective in reducing BMI in overweight and obese children and adolescents as much as face-to-face education and participation in physical training classes. Extending such interventions can be effective at the community level.      Keywords: Children, adolescents, physical activity, education, obesity, treatment.

  19. Competing indentation deformation mechanisms in glass using different strengthening methods

    Directory of Open Access Journals (Sweden)

    Jian Luo

    2016-11-01

    Full Text Available Chemical strengthening via ion exchange, thermal tempering, and lamination are proven techniques for strengthening of oxide glasses. For each of these techniques, the strengthening mechanism is conventionally ascribed to the linear superposition of the compressive stress profile on the glass surface. However, in this work we use molecular dynamics simulations to reveal the underlying indentation deformation mechanism beyond the simple linear superposition of compressive and indentation stresses. In particular, the plastic zone can be dramatically different from the commonly assumed hemispherical shape, which leads to a completely different stress field and resulting crack system. We show that the indentation-induced fracture is controlled by two competing mechanisms: the compressive stress itself and a potential reduction in free volume that can increase the driving force for crack formation. Chemical strengthening via ion exchange tends to escalate the competition between these two effects, while thermal tempering tends to reduce it. Lamination of glasses with differential thermal expansion falls in between. The crack system also depends on the indenter geometry and the loading stage, i.e., loading vs. after unloading. It is observed that combining thermal tempering or high free volume content with ion exchange or lamination can impart a relatively high compressive stress and reduce the driving force for crack formation. Therefore, such a combined approach might offer the best overall crack resistance for oxide glasses.

  20. Energy and water in the Great Lakes.

    Energy Technology Data Exchange (ETDEWEB)

    Tidwell, Vincent Carroll

    2011-11-01

    The nexus between thermoelectric power production and water use is not uniform across the U.S., but rather differs according to regional physiography, demography, power plant fleet composition, and the transmission network. That is, in some regions water demand for thermoelectric production is relatively small while in other regions it represents the dominate use. The later is the case for the Great Lakes region, which has important implications for the water resources and aquatic ecology of the Great Lakes watershed. This is today, but what about the future? Projected demographic trends, shifting lifestyles, and economic growth coupled with the threat of global climate change and mounting pressure for greater U.S. energy security could have profound effects on the region's energy future. Planning for such an uncertain future is further complicated by the fact that energy and environmental planning and regulatory decisionmaking is largely bifurcated in the region, with environmental and water resource concerns generally taken into account after new energy facilities and technologies have been proposed, or practices are already in place. Based on these confounding needs, the objective of this effort is to develop Great Lakes-specific methods and tools to integrate energy and water resource planning and thereby support the dual goals of smarter energy planning and development, and protection of Great Lakes water resources. Guiding policies for this planning are the Great Lakes and St. Lawrence River Basin Water Resources Compact and the Great Lakes Water Quality Agreement. The desired outcome of integrated energy-water-aquatic resource planning is a more sustainable regional energy mix for the Great Lakes basin ecosystem.

  1. Comparative Properties of Amazonian Oils Obtained by Different Extraction Methods

    Directory of Open Access Journals (Sweden)

    Cláudio Galuppo Diniz

    2011-07-01

    Full Text Available Pequi (Caryocar brasiliense Camb., babaçu (Orbignya phalerata Mart., buriti (Mauritia flexuosa, and passion fruit (Passiflora edulis oils were studied to determine their antibacterial, antioxidant and cytotoxic activities, as well as their total phenol and carotenoid contents. The fatty acid contents were determined by GC-MS. The three types of passion fruit oils studied were refined, cold pressed or extracted from seeds in a Soxhlet apparatus. The oils thus obtained showed differences in antioxidant activity and carotenoid content, but were similar in regard to total phenols. Buriti and pequi had the highest carotenoid contents, while refined and cold pressed passion fruit oil displayed the highest antioxidant activity. Pequi oil was the only oil to display antibacterial and cytotoxic activity.

  2. Characterization of depleted uranium oxides fabricated using different processing methods

    International Nuclear Information System (INIS)

    Hastings, E.P.; Lewis, C.; FitzPatrick, J.; Rademacher, D.; Tandon, L.

    2008-01-01

    Identifying both physical and chemical characteristics of Special Nuclear Material (SNM) production processes is the corner stone of nuclear forensics. Typically, processing markers are based on measuring an interdicted sample's bulk chemical properties, such as the elemental or isotopic composition, or focusing on the chemical and physical morphology of only a few particles. Therefore, it is imperative that known SNM processes be fully characterized from bulk to trace level for each particle size range. This report outlines a series of particle size measurements and fractionation techniques that can be applied to a bulk SNM powders, categorizing both chemical and physical properties in discrete particle size fractions. This will be demonstrated by characterizing the process signatures of a series of different depleted uranium oxides prepared at increasing firing temperatures (350-1100 deg C). Results will demonstrate how each oxides' material density, particle size distribution, and morphology varies. (author)

  3. Anodization of cast aluminium alloys produced by different casting methods

    Directory of Open Access Journals (Sweden)

    K. Labisz

    2008-08-01

    Full Text Available In this paper the usability of two casting methods, of sand and high pressure cast for the anodization of AlSi12 and AlSi9Cu3 aluminium cast alloys was investigated. With defined anodization parameters like electrolyte composition and temperature, current type and value a anodic alumina surface layer was produced. The quality, size and properties of the anodic layer was investigated after the anodization of the chosen aluminium cast alloys. The Alumina layer was observed used light microscope, also the mechanical properties were measured as well the abrasive wear test was made with using ABR-8251 equipment. The researches included analyze of the influence of chemical composition, geometry and roughness of anodic layer obtained on aluminum casts. Conducted investigations shows the areas of later researches, especially in the direction of the possible, next optimization anodization process of aluminum casting alloys, for example in the range of raising resistance on corrosion to achieve a suitable anodic surface layer on elements for increasing applications in the aggressive environment for example as materials on working building constructions, elements in electronics and construction parts in air and automotive industry.

  4. Performance Analysis and Application of Three Different Computational Methods for Solar Heating System with Seasonal Water Tank Heat Storage

    Directory of Open Access Journals (Sweden)

    Dongliang Sun

    2013-01-01

    Full Text Available We analyze and compare three different computational methods for a solar heating system with seasonal water tank heat storage (SHS-SWTHS. These methods are accurate numerical method, temperature stratification method, and uniform temperature method. The accurate numerical method can accurately predict the performance of the system, but it takes about 4 to 5 weeks, which is too long and hard for the performance analysis of this system. The temperature stratification method obtains relatively accurate computation results and takes a relatively short computation time, which is about 2 to 3 hours. Therefore, this method is most suitable for the performance analysis of this system. The deviation of the computational results of the uniform temperature method is great, and the time consumed is similar to that of the temperature stratification method. Therefore, this method is not recommended herein. Based on the above analyses, the temperature stratification method is applied to analyze the influence of the embedded depth of water tank, the thickness of thermal insulation material, and the collection area on the performance of this system. The results will provide a design basis for the related demonstration projects.

  5. Producing transparent PLZT ceramics using different synthesis method

    International Nuclear Information System (INIS)

    Dambekalne, M.; Antonova, M.; Livinsh, M.; Kalvane, A.; Plonska, M.; Garbarz-Glos, B.

    2004-01-01

    Full text: Ceramic samples of Pb 1-x La x (Zr 0.65 Ti 0.35 )O 3 (x 8, 9, 10) were prepared from powders being sintered by two methods: 1) peroxohydroxopolimer (PHP), where as precursors were used solutions of inorganic salts TiCl 4 , ZrOCl 4 ·8H 2 O, Pb(NO 3 ) 2 , La(NO 3 ) 3 ·6H 2 O); 2) sol-gel, using as precursors solutions of metal organic salts Pb(COOCH 3 ) 2 ·3H 2 O, La(COOCH 3 ) 3 ·1.5H 2 O, Zr(OCH 2 CH 2 CH 3 ) 4 , Ti(OCH 2 CH 2 CH 3 ) 4 . The thermal regimes for both powders were similar: synthesis at 600 0 C for 2 - 4h, obtaining amorphous nanopowder. Ceramic samples were produced by hot pressing at 1100 - 1200 0 C for 2 - 6h and pressure of 20Mpa.Optical transmittance of ceramic samples from PHP derived powders was higher than that from sol- gel derived. The transparency of poled plates with thickness of 0.3mm (wavelength λ = 630nm) was 67 - 69% and 56 - 59%, respectively. It can be explained by lack of technical support for sol-gel processing in atmosphere of neutral gas, as metal organic precursors are extremely sensitive to moisture of air. X-ray and DTA studies were used for powders. Dielectrics, ferroelectric and optical properties as well as studies of icrostructure were carried out for ceramic samples. The grain size of ceramics produced from PHP powders is 3- 4μ, for sol-gel ceramics less than 1μ

  6. Performance of Commercial Laying Hen Submitted to Different Debeaking Methods

    Directory of Open Access Journals (Sweden)

    CH Oka

    Full Text Available ABSTRACT Among the several factors required in breeding laying hens, debeaking is a factor that interferes with batch performance and affects animal welfare. Thus, the objective of this study was to evaluate three different debeaking procedures and to verify the best technique to be used. For this, the performance of the birds, the incidence of cannibalism, and in rearing phase, the quality of the eggs were evaluated. Dekalb White birds were distributed in a completely randomized design with three treatments, T1 (infrared radiation debeaking T2 (hot blade debeaking and T3 (V debeaking.The data was submitted to Analysis of Variance and compared by Tukey’s test (95%, using statistical software R. The frequencies of mortality and cannibalism were submitted to the Chi-Square test (Software R. It was observed that mortality was lower with IR debeaking in the breeding phase. Already in the rearing phase, the mortality was similar between the debeaking techniques and the cannibalism was null. The final mean weight (g, mean weight gain (g and average daily weight gain in the rearing and egg quality variables were higher for V debeaking when compared to other techniques. It is concluded that V-debeaking provides better bird performance, resistance and shell thickness when compared to the infrared radiations and hot blade debeaking, in addition to subjecting the birds to less stress.

  7. Comparison of different methods of calculating pinwise power

    International Nuclear Information System (INIS)

    Powers, M.A.

    1987-01-01

    One objective of a nuclear utility is the capability to predict the peak rod power in reload core design accurately and efficiently. This capability can be utilized in the verification of vendor results and the development of utility reload methodology. The MBS code solves the diffusion equation in x-y geometry by the finite different technique. The MBS code utilizes coarser meshes but reaches the same level of accuracy as a pin-by-pin model. The CASMO code utilizes pin profiles at specified core conditions, which are superimposed on the MBS diffusion theory results for pin power predictions. Placement of the burnable poison rods in the loading pattern are crucial to minimizing peak pin power. Westinghouse utilizes a code called TURTLE, licensed by the US Nuclear Regulatory Commission and proprietary to Westinghouse. The MBS code, with macroscopic cross sections from CASMO, can be run with coarser meshes and macroscopic depletion and still reach the same level of accuracy as a pin-by-pin code such as PDQ-7 or TURTLE. The MBS input preparation is simpler than PDQ-7 or TURTLE-type input preparation

  8. Skill forecasting from different wind power ensemble prediction methods

    International Nuclear Information System (INIS)

    Pinson, Pierre; Nielsen, Henrik A; Madsen, Henrik; Kariniotakis, George

    2007-01-01

    This paper presents an investigation on alternative approaches to the providing of uncertainty estimates associated to point predictions of wind generation. Focus is given to skill forecasts in the form of prediction risk indices, aiming at giving a comprehensive signal on the expected level of forecast uncertainty. Ensemble predictions of wind generation are used as input. A proposal for the definition of prediction risk indices is given. Such skill forecasts are based on the dispersion of ensemble members for a single prediction horizon, or over a set of successive look-ahead times. It is shown on the test case of a Danish offshore wind farm how prediction risk indices may be related to several levels of forecast uncertainty (and energy imbalances). Wind power ensemble predictions are derived from the transformation of ECMWF and NCEP ensembles of meteorological variables to power, as well as by a lagged average approach alternative. The ability of risk indices calculated from the various types of ensembles forecasts to resolve among situations with different levels of uncertainty is discussed

  9. Learning Science, Learning about Science, Doing Science: Different Goals Demand Different Learning Methods

    Science.gov (United States)

    Hodson, Derek

    2014-01-01

    This opinion piece paper urges teachers and teacher educators to draw careful distinctions among four basic learning goals: learning science, learning about science, doing science and learning to address socio-scientific issues. In elaboration, the author urges that careful attention is paid to the selection of teaching/learning methods that…

  10. Different methods to quantify Listeria monocytogenesbiofilms cells showed different profile in their viability

    Directory of Open Access Journals (Sweden)

    Lizziane Kretli Winkelströter

    2015-03-01

    Full Text Available Listeria monocytogenes is a foodborne pathogen able to adhere and to form biofilms in several materials commonly present in food processing plants. The aim of this study was to evaluate the resistance of Listeria monocytogenes attached to abiotic surface, after treatment with sanitizers, by culture method, microscopy and Quantitative Real Time Polymerase Chain Reaction (qPCR. Biofilms of L. monocytogenes were obtained in stainless steel coupons immersed in Brain Heart Infusion Broth, under agitation at 37 °C for 24 h. The methods selected for this study were based on plate count, microscopic count with the aid of viability dyes (CTC-DAPI, and qPCR. Results of culture method showed that peroxyacetic acid was efficient to kill sessile L. monocytogenes populations, while sodium hypochlorite was only partially effective to kill attached L. monocytogenes (p < 0.05. When, viability dyes (CTC/DAPI combined with fluorescence microscopy and qPCR were used and lower counts were found after treatments (p < 0.05. Selective quantification of viable cells of L. monocytogenes by qPCR using EMA revelead that the pre-treatment with EMA was not appropriate since it also inhibited amplification of DNA from live cells by ca. 2 log. Thus, the use of CTC counts was the best method to count viable cells in biofilms.

  11. Pressure transient analysis in single and two-phase water by finite difference methods

    International Nuclear Information System (INIS)

    Berry, G.F.; Daley, J.G.

    1977-01-01

    An important consideration in the design of LMFBR steam generators is the possibility of leakage from a steam generator water tube. The ensuing sodium/water reaction will be largely controlled by the amount of water available at the leak site, thus analysis methods treating this event must have the capability of accurately modeling pressure transients through all states of water occurring in a steam generator, whether single or two-phase. The equation systems of the present model consist of the conservation equations together with an equation of state for one-dimensional homogeneous flow. These equations are then solved using finite difference techniques with phase considerations and non-equilibrium effects being treated through the equation of state. The basis for water property computation is Keenan's 'fundamental equation of state' which is applicable to single-phase water at pressures less than 1000 bars and temperatures less than 1300 0 C. This provides formulations allowing computation of any water property to any desired precision. Two-phase properties are constructed from values on the saturation line. The use of formulations permits the direct calculation of any thermodynamic property (or property derivative) to great precision while requiring very little computer storage, but does involve considerable computation time. For this reason an optional calculation scheme based on the method of 'transfinite interpolation' is included to give rapid computation in selected regions with decreased precision. The conservation equations were solved using the second order Lax-Wendroff scheme which includes wall friction, allows the formation of shocks and locally supersonic flow. Computational boundary conditions were found from a method-of-characteristics solution at the reservoir and receiver ends. The local characteristics were used to interpolate data from inside the pipe to the boundary

  12. Application of a circulation model in waters, based in the difference method, for bays

    International Nuclear Information System (INIS)

    Rosa, P.A.C.

    1985-01-01

    The Knowledge of circulation of water in bays, in addition to the possibility of simulation future conditions, can be of great interest in solving problems related to the cooling water for Nuclear Power Plants, study of sediments and water polution, in addition to the study of civil engineering works planned in bays. A Numerical Circulation Model of water in bays, is applied to the conditions of Sepetiba Bay at Rio de Janeiro coast. This System of Partial Differential Equations that constitute the Model, were solved by the Finite Difference Method, using a uniform cartesian grid for uniform time steps generating a bi-dimensional flow measurement of depth. The results obtained by comparing the values of the Model and measurements taken a bay were satisfactory, assuring its credibility and efficiency. A programming code was developed for the application providing outputing at any preditermined time steps, with discrimination of 30 seconds, the average levels, flows, velocities and depths of water of each grid spacing along the length of the bay in addition to a graphic of the flow. (Author) [pt

  13. Isolation and purification of Echinococcus granulosus antigen B from hydatid cyst fluid using three different methods

    Directory of Open Access Journals (Sweden)

    Shirazi, S.

    2016-07-01

    Full Text Available Hydatid cyst, the larval stage of cestodes Echinococcus spp., is recognized as a zoonotic infection in the world. The World Health Organization (WHO has recently classified echinococcosis in a group of neglected tropical diseases. The prevalence of Echinococcus granulosus infection is high in Iran due to the presence of various intermediate hosts in this country. Considering the rising trend of this zoonotic parasitic disease based on national epidemiological studies, diagnosis is of great significance. WHO has suggested the use of specific antigens, especially antigen B (AgB for serological diagnostic tests. In general, AgB is a polymeric lipoprotein, which disintegrates into 8.12, 16, and 20.24 kDa subunits. In the present study, we applied three different methods for AgB isolation from hydatid cyst fluid (HCF and compared their efficacy in AgB isolation. Finally, the protein concentration of this antigen was measured by Bradford assay and confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. The results showed that the application of polyethylene glycol (PEG 4000 as a thickener agent beside purification of HCF in dialysis bag and filtering and also dialysis against acetate buffer leading to the best quantity in purified antigen B.

  14. Contact Stress Analysis for Gears of Different Helix Angle Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Patil Santosh

    2014-07-01

    Full Text Available The gear contact stress problem has been a great point of interest for many years, but still an extensive research is required to understand the various parameters affecting this stress. Among such parameters, helix angle is one which has played a crucial role in variation of contact stress. Numerous studies have been carried out on spur gear for contact stress variation. Hence, the present work is an attempt to study the contact stresses among the helical gear pairs, under static conditions, by using a 3D finite element method. The helical gear pairs on which the analysis is carried are 0, 5, 15, 25 degree helical gear sets. The Lagrange multiplier algorithm has been used between the contacting pairs to determine the stresses. The helical gear contact stress is evaluated using FE model and results have also been found at different coefficient of friction, varying from 0.0 to 0.3. The FE results have been further compared with the analytical calculations. The analytical calculations are based upon Hertz and AGMA equations, which are modified to include helix angle. The commercial finite element software was used in the study and it was shown that this approach can be applied to gear design efficiently. The contact stress results have shown a decreasing trend, with increase in helix angle.

  15. Different methods to define utility functions yield similar results but engage different neural processes

    Directory of Open Access Journals (Sweden)

    Marcus Heldmann

    2009-10-01

    Full Text Available Although the concept of utility is fundamental to many economic theories, up to now a generally accepted method determining a subject’s utility function is not available. We investigated two methods that are used in economic sciences for describing utility functions by using response-locked event-related potentials in order to assess their neural underpinnings. For defining the certainty equivalent (CE, we used a lottery game with probabilities to win p=0.5, for identifying the subjects’ utility functions directly a standard bisection task was applied. Although the lottery tasks’ payoffs were only hypothetical, a pronounced negativity was observed resembling the error related negativity (ERN previously described in action monitoring research, but this occurred only for choices far away from the indifference point between money and lottery. By contrast, the bisection task failed to evoke an ERN irrespective of the responses’ correctness. Based on these findings we are reasoning that only decisions made in the lottery task achieved a level of subjective relevance that activates cognitive-emotional monitoring. In terms of economic sciences, our findings support the view that the bisection method is unaffected by any kind of probability valuation or other parameters related to risk and in combination with the lottery task can, therefore, be used to differentiate between payoff and probability valuation.

  16. Great Lakes Literacy Principles

    Science.gov (United States)

    Fortner, Rosanne W.; Manzo, Lyndsey

    2011-03-01

    Lakes Superior, Huron, Michigan, Ontario, and Erie together form North America's Great Lakes, a region that contains 20% of the world's fresh surface water and is home to roughly one quarter of the U.S. population (Figure 1). Supporting a $4 billion sport fishing industry, plus $16 billion annually in boating, 1.5 million U.S. jobs, and $62 billion in annual wages directly, the Great Lakes form the backbone of a regional economy that is vital to the United States as a whole (see http://www.miseagrant.umich.edu/downloads/economy/11-708-Great-Lakes-Jobs.pdf). Yet the grandeur and importance of this freshwater resource are little understood, not only by people in the rest of the country but also by many in the region itself. To help address this lack of knowledge, the Centers for Ocean Sciences Education Excellence (COSEE) Great Lakes, supported by the U.S. National Science Foundation and the National Oceanic and Atmospheric Administration, developed literacy principles for the Great Lakes to serve as a guide for education of students and the public. These “Great Lakes Literacy Principles” represent an understanding of the Great Lakes' influences on society and society's influences on the Great Lakes.

  17. The Next Great Generation?

    Science.gov (United States)

    Brownstein, Andrew

    2000-01-01

    Discusses ideas from a new book, "Millennials Rising: The Next Great Generation," (by Neil Howe and William Strauss) suggesting that youth culture is on the cusp of a radical shift with the generation beginning with this year's college freshmen who are typically team oriented, optimistic, and poised for greatness on a global scale. Includes a…

  18. Group B streptococcus detection in China: comparison of different screening methods and different sampling sites

    Directory of Open Access Journals (Sweden)

    Xi Wang, Yingna Song, Liangkun Ma, Juntao Liu, Yingchun Xu, Jie Yi

    2016-12-01

    Full Text Available Objectives: To evaluate the use of real-time polymerase chain reaction (RT-PCR and bacterial culture methods to detect group B streptococcus (GBS in Chinese pregnant women in the third trimester; to separately assess the prevalence of rectal and vaginal GBS colonization ; and to determine the antimicrobial susceptibility pattern of the isolates. Methodology: Samples were collected from 505 women at 35 and 37 weeks gestation at the Peking Union Medical College Hospital. Bacterial culture and RT-PCR were performed. Antimicrobial susceptibility to commonly used antibiotics was also analyzed. Results: The overall GBS colonization rate was 7.5%. The colonization rate, sensitivity, and negative predictive value of the bacterial culture method were 2.8%, 36.8%, and 95.1%, respectively, and these values were 7.3%, 97.4%, and 99.8%, respectively, for PCR (p<0.001. The GBS colonization rate of the rectum (6.7% was higher than that of the vagina (2.8% (p=0.005. Antimicrobial susceptibility testing showed that 100% were sensitive to penicillin, cephalosporin and vancomycin. Conclusions: RT-PCR was found to be a rapid and sensitive test for the detection of GBS colonization in Chinese pregnant women. Rectal swabbing was also important for detecting GBS colonization. β-lactams are the first-line antibiotics used for the treatment of GBS. J Microbiol Infect Dis 2016;6(4: 179-183

  19. Gender obesity inequities are huge but differ greatly according to environment and socio-economics in a North African setting: a national cross-sectional study in Tunisia.

    Directory of Open Access Journals (Sweden)

    Jalila El Ati

    Full Text Available INTRODUCTION: Southern Mediterranean countries have experienced a marked increase in the prevalence of obesity whose consequences for gender related health inequities have been little studied. We assessed gender obesity inequalities and their environmental and socio-economic modifiers among Tunisian adults. METHODS: Cross-sectional survey in 2005; national, 3 level random cluster sample of 35-70 years Tunisians (women: n = 2964, men: n = 2379. Overall adiposity was assessed by BMI = weight(kg/height(m(2 and obesity was BMI≥30, WHtR = waist circumference to height ratio defined abdominal obesity as WHtR≥0.6. Gender obesity inequality measure was women versus men Prevalence Proportion Odds-Ratio (OR; models featuring gender x covariate interaction assessed variation of gender obesity inequalities with area (urban versus rural, age, marital status or socio-economic position (profession, education, household income proxy. RESULTS: BMI was much higher among women (28.4(0.2 versus men (25.3(0.1, P<0.0001 as was obesity (37.0% versus 13.3%, OR = 3.8[3.1-7.4], P<0.0001 and abdominal obesity (42.6% versus 15.6%, 4.0[3.3-4.8], P<0.0001. Gender obesity inequalities (women versus men adjusted OR were higher in urban (OR = 3.3[1.3-8.7] than rural (OR = 2.0[0.7-5.5] areas. These gender obesity inequalities were lower for subjects with secondary education or more (OR = 3.3[1.3-8.6], than among those with no schooling (OR = 6.9[2.0-23.3]. They were also lower for those with upper/intermediate profession (OR = 1.4[0.5-4.3] or even employees/workers OR = 2.3[1.0-5.4] than those not professionaly active at all (OR = 3.3[1.3-8.6]. Similar results were observed for addominal obesity. CONCLUSION: The huge overall gender obesity inequities (women much more corpulent than men were higher in urban settings, but lower among subjects of higher education and professional activity. Reasons for gender inequalities in

  20. Structural variation and rates of genome evolution in the grass family seen through comparison of sequences of genomes greatly differing in size.

    Science.gov (United States)

    Dvorak, Jan; Wang, Le; Zhu, Tingting; Jorgensen, Chad M; Deal, Karin R; Dai, Xiongtao; Dawson, Matthew W; Müller, Hans-Georg; Luo, Ming-Cheng; Ramasamy, Ramesh K; Dehghani, Hamid; Gu, Yong Q; Gill, Bikram S; Distelfeld, Assaf; Devos, Katrien M; Qi, Peng; You, Frank M; Gulick, Patrick J; McGuire, Patrick E

    2018-05-16

    Homology was searched with genes annotated in the Aegilops tauschii pseudomolecules against genes annotated in the pseudomolecules of tetraploid wild emmer wheat, Brachypodium distachyon, sorghum, and rice. Similar searches were initiated with genes annotated in the rice pseudomolecules. Matrices of colinear genes and rearrangements in their order were constructed. Optical Bionano genome maps were constructed and used to validate rearrangements unique to the wild emmer and Ae. tauschii genomes. Most common rearrangements were short paracentric inversions and short intrachromosomal translocations. Intrachromosomal translocations outnumbered segmental intrachromosomal duplications. The densities of paracentric inversion lengths were approximated by exponential distributions in all six genomes. Densities of colinear genes along the Ae. tauschii chromosomes were highly correlated with meiotic recombination rates but those of rearrangements were not, suggesting different causes of the erosion of gene colinearity and evolution of major chromosome rearrangements. Frequent rearrangements sharing breakpoints suggested that chromosomes have been rearranged recurrently at some sites. The distal 4 Mb of the short arms of rice chromosomes Os11 and Os12 and corresponding regions in the sorghum, B. distachyon, and Triticeae genomes contain clusters of interstitial translocations including from 1 to 7 colinear genes. The rates of acquisition of major rearrangements were greater in the wild emmer wheat and Ae. tauschii genomes than in the lineage preceding their divergence or in the B. distachyon, rice, and sorghum lineages. It is suggested that synergy between large quantities of dynamic transposable elements and annual growth habit caused the fast evolution of the Triticeae genomes. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  1. The impact of different blood sampling methods on laboratory rats under different types of anaesthesia

    DEFF Research Database (Denmark)

    Toft, Martin Fitzner; Petersen, Mikke Haxø; Dragsted, Nils

    2006-01-01

    for rats sampled from the tail vein, which showed fluctuations in body temperature in excess of 30 h after sampling. Increases in heart rate and blood pressure within the first hours after sampling indicated that periorbital puncture was the method that had the largest acute impact on the rats......Rats with implanted telemetry transponders were blood sampled by jugular puncture, periorbital puncture or tail vein puncture, or sampled by jugular puncture in carbon dioxide (CO?), isoflurane or without anaesthesia in a crossover design. Heart rate, blood pressure and body temperature were...... registered for three days after sampling. Initially blood pressure increased, but shortly after sampling it decreased, which led to increased heart rate. Sampling induced rapid fluctuations in body temperature, and an increase in body temperature. Generally, rats recovered from sampling within 2-3 h, except...

  2. Comparison of Different Numerical Methods for Quality Factor Calculation of Nano and Micro Photonic Cavities

    DEFF Research Database (Denmark)

    Taghizadeh, Alireza; Mørk, Jesper; Chung, Il-Sug

    2014-01-01

    Four different numerical methods for calculating the quality factor and resonance wavelength of a nano or micro photonic cavity are compared. Good agreement was found for a wide range of quality factors. Advantages and limitations of the different methods are discussed.......Four different numerical methods for calculating the quality factor and resonance wavelength of a nano or micro photonic cavity are compared. Good agreement was found for a wide range of quality factors. Advantages and limitations of the different methods are discussed....

  3. Perfectly Matched Layer for the Wave Equation Finite Difference Time Domain Method

    Science.gov (United States)

    Miyazaki, Yutaka; Tsuchiya, Takao

    2012-07-01

    The perfectly matched layer (PML) is introduced into the wave equation finite difference time domain (WE-FDTD) method. The WE-FDTD method is a finite difference method in which the wave equation is directly discretized on the basis of the central differences. The required memory of the WE-FDTD method is less than that of the standard FDTD method because no particle velocity is stored in the memory. In this study, the WE-FDTD method is first combined with the standard FDTD method. Then, Berenger's PML is combined with the WE-FDTD method. Some numerical demonstrations are given for the two- and three-dimensional sound fields.

  4. Effect of different gas stunning methods on Manchega suckling lamb meat packed under different modified atmospheres.

    Science.gov (United States)

    Bórnez, R; Linares, M B; Vergara, H

    2010-04-01

    Forty-nine Manchega breed male suckling lambs were used in this experiment. The effect of CO(2) concentration and exposure time at stunning [80% CO(2) for 90 s (G1); 90% CO(2) for 90 s (G2); 90% CO(2) for 60 s (G3); 80% CO(2) for 60 s (G4)] plus an electrically stunned control group (G5) was assessed for pH, colour (L(*), a(*), b(*), C(*) and h(*)), water holding capacity (WHC), drip loss (DL), cooking loss (CL) and shear force (SF) in samples packed under two different types of modified atmospheres (MA: MA A: 70%O(2)+30%CO(2); MA B: 69.3%N(2)+30%CO(2)+0.7%CO) at 7, 14 and 21 d post-packaging. The lowest pH was found in G4 and in G5. The highest WHC and the lowest CL were found in G2 and G3 groups (P<0.05). Modified atmospheres did not affect on pH, WHC, CL and DL, although a significant effect (P<0.001) on colour was found at all the analysis times. Both the type of stunning and the modified atmosphere affected SF values. 2009 Elsevier Ltd. All rights reserved.

  5. EIT Imaging of admittivities with a D-bar method and spatial prior: experimental results for absolute and difference imaging.

    Science.gov (United States)

    Hamilton, S J

    2017-05-22

    Electrical impedance tomography (EIT) is an emerging imaging modality that uses harmless electrical measurements taken on electrodes at a body's surface to recover information about the internal electrical conductivity and or permittivity. The image reconstruction task of EIT is a highly nonlinear inverse problem that is sensitive to noise and modeling errors making the image reconstruction task challenging. D-bar methods solve the nonlinear problem directly, bypassing the need for detailed and time-intensive forward models, to provide absolute (static) as well as time-difference EIT images. Coupling the D-bar methodology with the inclusion of high confidence a priori data results in a noise-robust regularized image reconstruction method. In this work, the a priori D-bar method for complex admittivities is demonstrated effective on experimental tank data for absolute imaging for the first time. Additionally, the method is adjusted for, and tested on, time-difference imaging scenarios. The ability of the method to be used for conductivity, permittivity, absolute as well as time-difference imaging provides the user with great flexibility without a high computational cost.

  6. Great Indoors Awards 2007

    Index Scriptorium Estoniae

    2007-01-01

    Hollandis Maastrichtis jagati 17. XI esimest korda rahvusvahelist auhinda The Great Indoors Award. Aasta sisekujundusfirmaks valiti Masamichi Katayama asutatud Wonderwall. Auhinna said veel Zaha Hadid, Heatherwick Studio, Ryui Nakamura Architects ja Item Idem

  7. Great Lakes Bathymetry

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathymetry of Lakes Michigan, Erie, Saint Clair, Ontario and Huron has been compiled as a component of a NOAA project to rescue Great Lakes lake floor geological and...

  8. Comparison Of Simulation Results When Using Two Different Methods For Mold Creation In Moldflow Simulation

    Directory of Open Access Journals (Sweden)

    Kaushikbhai C. Parmar

    2017-04-01

    Full Text Available Simulation gives different results when using different methods for the same simulation. Autodesk Moldflow Simulation software provide two different facilities for creating mold for the simulation of injection molding process. Mold can be created inside the Moldflow or it can be imported as CAD file. The aim of this paper is to study the difference in the simulation results like mold temperature part temperature deflection in different direction time for the simulation and coolant temperature for this two different methods.

  9. Performance of the Different Methods of Study Financing: A Measurement through the Data Envelopment Analysis Method

    OpenAIRE

    Valérie Vierstraete; Eric Yergeau

    2010-01-01

    Financial hardship can significantly undermine post-secondary students’ ability to attain their academic goals: completing their training and obtaining degrees with good grades. This study considers which method of financing studies—loans and bursaries from the Government, student aid granted directly by universities, scholarships or on-campus jobs, off-campus jobs or parental financial contribution—will best help students attain academic success. For these purposes, we use a non-parametric d...

  10. Domain-adaptive finite difference methods for collapsing annular liquid jets

    Science.gov (United States)

    Ramos, J. I.

    1993-01-01

    A domain-adaptive technique which maps a time-dependent, curvilinear geometry into a unit square is used to determine the steady state mass absorption rate and the collapse of annular liquid jets. A method of lines is used to solve the one-dimensional fluid dynamics equations written in weak conservation-law form, and upwind differences are employed to evaluate the axial convective fluxes. The unknown, time-dependent, axial location of the downstream boundary is determined from the solution of an ordinary differential equation which is nonlinearly coupled to the fluid dynamics and gas concentration equations. The equation for the gas concentration in the annular liquid jet is written in strong conservation-law form and solved by means of a method of lines at high Peclet numbers and a line Gauss-Seidel method at low Peclet numbers. The effects of the number of grid points along and across the annular jet, time step, and discretization of the radial convective fluxes on both the steady state mass absorption rate and the jet's collapse rate have been analyzed on staggered and non-staggered grids. The steady state mass absorption rate and the collapse of annular liquid jets are determined as a function of the Froude, Peclet and Weber numbers, annular jet's thickness-to-radius ratio at the nozzle exit, initial pressure difference across the annular jet, nozzle exit angle, temperature of the gas enclosed by the annular jet, pressure of the gas surrounding the jet, solubilities at the inner and outer interfaces of the annular jet, and gas concentration at the nozzle exit. It is shown that the steady state mass absorption rate is proportional to the inverse square root of the Peclet number except for low values of this parameter, and that the possible mathematical incompatibilities in the concentration field at the nozzle exit exert a great influence on the steady state mass absorption rate and on the jet collapse. It is also shown that the steady state mass absorption

  11. Comparison of different methods for assessment of left ventricular regional motility using the gated blood pool method

    International Nuclear Information System (INIS)

    Neumann, P.; Schicha, H.; Karsch, K.R.; Kreuzer, H.; Emrich, D.

    1983-01-01

    The following methods of evaluation were compared: qualitative analysis of cine mode; qualitative analysis of parametric scans obtained by Fourier analysis including the phase histogram; quantitative analysis of regional ejection fraction (EF). Regional wall motion abnormalities of high degree (akinesia, dyskinesia) were recognized by all three methods with a high sensitivity of 89.7-96.6% without statistically significant differences. The sensitivity for detecting hypokinetic segments was significantly lower (50.0-68.2%) without statistically significant differences between the three methods. Sensitivity for all kinds of wall motion abnormalities could be increased by combining the quantitative method of regional EF with the qualitative evaluation after Fourier analysis

  12. Influences of different sample preparation methods on tooth enamel ESR signals

    International Nuclear Information System (INIS)

    Zhang Wenyi; Jiao Ling; Zhang Liang'an; Pan Zhihong; Zeng Hongyu

    2005-01-01

    Objective: To study the influences of different sample preparation methods on tooth enamel ESR signals in order to reduce the effect of dentine on their sensitivities to radiation. Methods: The enamel was separated from dentine of non-irradiated adult teeth by mechanical, chemical, or both methods. The samples of different preparations were scanned by an ESR spectrometer before and after irradiation. Results: The response of ESR signals of samples prepared with different methods to radiation dose was significantly different. Conclusion: The selection of sample preparation method is very important for dose reconstruction by tooth enamel ESR dosimetry, especially in the low dose range. (authors)

  13. Gastroesophageal reflux diagnosis by scintigraphic method - a comparison among different methods

    International Nuclear Information System (INIS)

    Cruz, Maria das Gracas de Almedia; Penas, Maria Exposito; Maliska, Carmelindo; Fonseca, Lea Miriam B. da; Lemme, Eponina M.; Campos, Deisy Guacyaba S.; Rebelo, Ana Maria de O.; Martinho, Maria Jose R.; Dias, Vera Maria

    1996-01-01

    The gastroesophageal reflux disease is characterized by the return of gastric liquid to the esophagus which can origin the reflux esophagitis. The aim is to evaluate the contribution of dynamic quality scintigraphy of reflux (CTR) in the diagnosis of DRGE. We studied a ground of sick people with typical symptoms and compared the results given by digestive endoscopy (EDA), the histopathology and 24 hours pHmetry. There have been evaluated 24 healthy individuals and 97 who were sick. The first ones were submitted to CTR. In 20 controlled and 34 patients, the reflux index (IR) was determined by the evaluation of the reflux material percentage in relation to the basal activity. All the sick patients were submitted to CTR and EDA. This one classified them in: group A with esophagitis 45 patients (46,4%) where 14 did the biopsy of the third segment/part from the esophagus and 16 did the long pHmetry and group B without esophagitis = 52 patients (53.6%), 26 did the biopsy and 36 the pHmetry. In group A the CTR was positive in 38 (84%), the biopsy showed esophagitis in 11 (78,6%) and the pHmetry showed normal reflux in 14 (87,5%). The positivity of the same exams in group B were of 42 (81%), 11 (42,3%) and 19 (53%) respectively. The IR were determined to the controls and the measure to the patients were of 59% and 106% respectively as p<0,0001 (test from Mann Whitney). The correlation of CTR with the other methods showed sensitivity of 84,1%, specificity of 95,8%, positive predictive value of 98,3% and negative predictive value of 67,7%. As it was showed the authors concluded that the scintigraphy method can confirm the diagnosis of DRGE in patients of typical symptomology which can be recommended by the initial of investigation method in these conditions. (author)

  14. Peculiarities of cyclotron magnetic system calculation with the finite difference method using two-dimensional approximation

    International Nuclear Information System (INIS)

    Shtromberger, N.L.

    1989-01-01

    To design a cyclotron magnetic system the legitimacy of two-dimensional approximations application is discussed. In all the calculations the finite difference method is used, and the linearization method with further use of the gradient conjugation method is used to solve the set of finite-difference equations. 3 refs.; 5 figs

  15. A new fitted operator finite difference method to solve systems of ...

    African Journals Online (AJOL)

    In recent years, fitted operator finite difference methods (FOFDMs) have been developed for numerous types of singularly perturbed ordinary differential equations. The construction of most of these methods differed though the final outcome remained similar. The most crucial aspect was how the difference operator was ...

  16. Nothing Great Is Easy

    OpenAIRE

    Stansbie, Lisa

    2014-01-01

    A solo exhibition of 13 pieces of art work.\\ud \\ud Nothing Great is Easy is an exhibition of sculpture, film, drawing and photography that proposes reconstructed narratives using the sport of swimming and in particular the collective interaction and identity of the channel swimmer. The work utilises the processes, rituals/rules, language and the apparatus of sport.\\ud \\ud “Nothing great is easy” are the words on the memorial to Captain Matthew Webb who was the first man to swim the English ch...

  17. Comparison of Three Different Methods for Pile Integrity Testing on a Cylindrical Homogeneous Polyamide Specimen

    Science.gov (United States)

    Lugovtsova, Y. D.; Soldatov, A. I.

    2016-01-01

    Three different methods for pile integrity testing are proposed to compare on a cylindrical homogeneous polyamide specimen. The methods are low strain pile integrity testing, multichannel pile integrity testing and testing with a shaker system. Since the low strain pile integrity testing is well-established and standardized method, the results from it are used as a reference for other two methods.

  18. [Influence of different processing methods on Angelica sinensis polysaccharides from same origin].

    Science.gov (United States)

    Lv, Jieli; Chen, Hongli; Duan, Jinao; Yan, Hui; Tang, Yuping; Song, Bingsheng

    2011-04-01

    To study the influences of different processing methods on the content of Angelica sinensis polysaccharides (APS) from the same origin. The contents of neutral polysaccharides and acidic polysaccharides in various samples of A. sinensis were determined by phenol-sulfuric acid and carbazole-sulfuric acid method, respectively. The proliferation ability of lymphocyte was detected by MTT method after the cells were cultured with different concentrations of APS from two samples processed by different methods. The different processing methods had different effects on the contents of polysaccharide. The maximum content of APS (26.03%) was found in the sample processed by microwave drying medium-fired, but the minimum content of APS (2.25%) was found in the sample processed by vacuum drying at 50 TC. Furthermore, the APS (high concentration group, P methods have different effects on the contents of APS and the proliferation ability of lymphocytes.

  19. On the Inclusion of Difference Equation Problems and Z Transform Methods in Sophomore Differential Equation Classes

    Science.gov (United States)

    Savoye, Philippe

    2009-01-01

    In recent years, I started covering difference equations and z transform methods in my introductory differential equations course. This allowed my students to extend the "classical" methods for (ordinary differential equation) ODE's to discrete time problems arising in many applications.

  20. Investigation of a national outbreak of STEC Escherichia coli O157 using online consumer panel control methods: Great Britain, October 2014.

    Science.gov (United States)

    Sinclair, C; Jenkins, C; Warburton, F; Adak, G K; Harris, J P

    2017-04-01

    In October 2014, Public Health England (PHE) identified cases of Shiga toxin-producing Escherichia coli (STEC) serogroup O157 sharing a multiple locus variable-number tandem repeat analysis (MLVA) profile. We conducted a case-control study using multivariable logistic regression to calculate adjusted odds ratios (aOR) and 95% confidence intervals (CI) testing a range of exposures. Cases were defined as laboratory-confirmed STEC O157 with the implicated MLVA profile, were UK residents aged ⩾18 years with symptom onset between 25 September and 30 October 2014, and had no history of travel abroad within 5 days of symptom onset. One hundred and two cases were identified. Cases were mostly female (65%; median age 49, range 2-92 years). It was the second largest outbreak seen in England, to date, and a case-control study was conducted using market research panel controls and online survey methods. These methods were instrumental in the rapid data collection and analysis necessary to allow traceback investigations for short shelf-life products. This is a new method of control recruitment and this is the first in which it was a standalone recruitment method. The case-control study suggested a strong association between consumption of a ready-to-eat food and disease (aOR 28, 95% CI 5·0-157) from one retailer. No reactive microbiological testing of food items during the outbreak was possible due to the short shelf-life of the product. Collaboration with industrial bodies is needed to ensure timely traceback exercises to identify contamination events and initiate appropriate and focused microbiological testing and implement control measures.

  1. The Great Mathematician Project

    Science.gov (United States)

    Goldberg, Sabrina R.

    2013-01-01

    The Great Mathematician Project (GMP) introduces both mathematically sophisticated and struggling students to the history of mathematics. The rationale for the GMP is twofold: first, mathematics is a uniquely people-centered discipline that is used to make sense of the world; and second, students often express curiosity about the history of…

  2. What great managers do.

    Science.gov (United States)

    Buckingham, Marcus

    2005-03-01

    Much has been written about the qualities that make a great manager, but most of the literature overlooks a fundamental question: What does a great manager actually do? While there are countless management styles, one thing underpins the behavior of all great managers. Above all, an exceptional manager comes to know and value the particular quirks and abilities of her employees. She figures out how to capitalize on her staffers' strengths and tweaks her environment to meet her larger goals. Such a specialized approach may seem like a lot of work. But in fact, capitalizing on each person's uniqueness can save time. Rather than encourage employees to conform to strict job descriptions that may include tasks they don't enjoy and aren't good at, a manager who develops positions for his staff members based on their unique abilities will be rewarded with behaviors that are far more efficient and effective than they would be otherwise. This focus on individuals also makes employees more accountable. Because staffers are evaluated on their particular strengths and weaknesses, they are challenged to take responsibility for their abilities and to hone them. Capitalizing on a person's uniqueness also builds a stronger sense of team. By taking the time to understand what makes each employee tick, a great manager shows that he sees his people for who they are. This personal investment not only motivates individuals but also galvanizes the entire team. Finally, this approach shakes up existing hierarchies, which leads to more creative thinking. To take great managing from theory to practice, the author says, you must know three things about a person: her strengths, the triggers that activate those strengths, and how she learns. By asking the right questions, squeezing the right triggers, and becoming aware of your employees' learning styles, you will discover what motivates each person to excel.

  3. Detection of oral HPV infection - Comparison of two different specimen collection methods and two HPV detection methods.

    Science.gov (United States)

    de Souza, Marjorie M A; Hartel, Gunter; Whiteman, David C; Antonsson, Annika

    2018-04-01

    Very little is known about the natural history of oral HPV infection. Several different methods exist to collect oral specimens and detect HPV, but their respective performance characteristics are unknown. We compared two different methods for oral specimen collection (oral saline rinse and commercial saliva kit) from 96 individuals and then analyzed the samples for HPV by two different PCR detection methods (single GP5+/6+ PCR and nested MY09/11 and GP5+/6+ PCR). For the oral rinse samples, the oral HPV prevalence was 10.4% (GP+ PCR; 10% repeatability) vs 11.5% (nested PCR method; 100% repeatability). For the commercial saliva kit samples, the prevalences were 3.1% vs 16.7% with the GP+ PCR vs the nested PCR method (repeatability 100% for both detection methods). Overall the agreement was fair or poor between samples and methods (kappa 0.06-0.36). Standardizing methods of oral sample collection and HPV detection would ensure comparability between future oral HPV studies. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Comparison of different methods to quantify fat classes in bakery products.

    Science.gov (United States)

    Shin, Jae-Min; Hwang, Young-Ok; Tu, Ock-Ju; Jo, Han-Bin; Kim, Jung-Hun; Chae, Young-Zoo; Rhu, Kyung-Hun; Park, Seung-Kook

    2013-01-15

    The definition of fat differs in different countries; thus whether fat is listed on food labels depends on the country. Some countries list crude fat content in the 'Fat' section on the food label, whereas other countries list total fat. In this study, three methods were used for determining fat classes and content in bakery products: the Folch method, the automated Soxhlet method, and the AOAC 996.06 method. The results using these methods were compared. Fat (crude) extracted by the Folch and Soxhlet methods was gravimetrically determined and assessed by fat class using capillary gas chromatography (GC). In most samples, fat (total) content determined by the AOAC 996.06 method was lower than the fat (crude) content determined by the Folch or automated Soxhlet methods. Furthermore, monounsaturated fat or saturated fat content determined by the AOAC 996.06 method was lowest. Almost no difference was observed between fat (crude) content determined by the Folch method and that determined by the automated Soxhlet method for nearly all samples. In three samples (wheat biscuits, butter cookies-1, and chocolate chip cookies), monounsaturated fat, saturated fat, and trans fat content obtained by the automated Soxhlet method was higher than that obtained by the Folch method. The polyunsaturated fat content obtained by the automated Soxhlet method was not higher than that obtained by the Folch method in any sample. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Different crystal morphologies arising from different preparation methods of a same polymorphic form may result in different properties of the final materials: the case of diclofenac sodium trihydrate.

    Science.gov (United States)

    Rodomonte, Andrea; Antoniella, Eleonora; Bertocchi, Paola; Gaudiano, Maria Cristina; Manna, Livia; Bartolomei, Monica

    2008-09-29

    Diclofenac sodium is a nonsteroidal anti-inflammatory drug widely used in painful and inflammatory diseases. It can exist in different hydrate phases. Recently the physico-chemical and pharmaceutical properties of a trihydrate form, named DSH3 were reported by the same authors. This short communication discusses how samples of a same polymorphic form can display dissimilar analytical signatures when obtained by different routes. Data from hot-stage microscopy, FT-IR spectroscopy, X-ray powder diffraction (XRDP) and thermal analysis were used to characterise the DSH3 samples prepared by different methods. Through the case study of diclofenac sodium, this work highlights how the method used to prepare a specific crystal modification can generate samples with different morphologies and therefore different properties and physical stability.

  6. Great magnetic storms

    International Nuclear Information System (INIS)

    Tsurutani, B.T.; Yen Te Lee; Tang, F.; Gonzalez, W.D.

    1992-01-01

    The five largest magnetic storms that occurred between 1971 and 1986 are studied to determine their solar and interplanetary causes. All of the events are found to be associated with high speed solar wind streams led by collisionless shocks. The high speed streams are clearly related to identifiable solar flares. It is found that (1) it is the extreme values of the southward interplanetary magnetic fields rather than solar wind speeds that are the primary causes of great magnetic storms, (2) shocked and draped sheath fields preceding the driver gas (magnetic cloud) are at least as effective in causing the onset of great magnetic storms (3 of 5 events ) as the strong fields within the driver gas itself, and (3) precursor southward fields ahead of the high speed streams allow the shock compression mechanism (item 2) to be particularly geoeffective

  7. Reliability testing of tendon disease using two different scanning methods in patients with rheumatoid arthritis

    DEFF Research Database (Denmark)

    Bruyn, George A W; Möller, Ingrid; Garrido, Jesus

    2012-01-01

    To assess the intra- and interobserver reliability of musculoskeletal ultrasonography (US) in detecting inflammatory and destructive tendon abnormalities in patients with RA using two different scanning methods.......To assess the intra- and interobserver reliability of musculoskeletal ultrasonography (US) in detecting inflammatory and destructive tendon abnormalities in patients with RA using two different scanning methods....

  8. Do different methods of modeling statin treatment effectiveness influence the optimal decision?

    NARCIS (Netherlands)

    B.J.H. van Kempen (Bob); B.S. Ferket (Bart); A. Hofman (Albert); S. Spronk (Sandra); E.W. Steyerberg (Ewout); M.G.M. Hunink (Myriam)

    2012-01-01

    textabstractPurpose. Modeling studies that evaluate statin treatment for the prevention of cardiovascular disease (CVD) use different methods to model the effect of statins. The aim of this study was to evaluate the impact of using different modeling methods on the optimal decision found in such

  9. Methods of Suicide by Age: Sex and Race Differences among the Young and Old.

    Science.gov (United States)

    McIntosh, John L.; Santos, John F.

    1986-01-01

    Annual official statistics for specific methods of suicide (firearms, hanging, poisons) by age for different sex and racial groups (Whites, Blacks, non-Whites excluding Black) were examined from 1960 to 1978. Comparisons among the age-sex-race groups, along with trends over time and differences in the methods employed, were noted. (Author/ABL)

  10. An optimal implicit staggered-grid finite-difference scheme based on the modified Taylor-series expansion with minimax approximation method for elastic modeling

    Science.gov (United States)

    Yang, Lei; Yan, Hongyong; Liu, Hong

    2017-03-01

    Implicit staggered-grid finite-difference (ISFD) scheme is competitive for its great accuracy and stability, whereas its coefficients are conventionally determined by the Taylor-series expansion (TE) method, leading to a loss in numerical precision. In this paper, we modify the TE method using the minimax approximation (MA), and propose a new optimal ISFD scheme based on the modified TE (MTE) with MA method. The new ISFD scheme takes the advantage of the TE method that guarantees great accuracy at small wavenumbers, and keeps the property of the MA method that keeps the numerical errors within a limited bound at the same time. Thus, it leads to great accuracy for numerical solution of the wave equations. We derive the optimal ISFD coefficients by applying the new method to the construction of the objective function, and using a Remez algorithm to minimize its maximum. Numerical analysis is made in comparison with the conventional TE-based ISFD scheme, indicating that the MTE-based ISFD scheme with appropriate parameters can widen the wavenumber range with high accuracy, and achieve greater precision than the conventional ISFD scheme. The numerical modeling results also demonstrate that the MTE-based ISFD scheme performs well in elastic wave simulation, and is more efficient than the conventional ISFD scheme for elastic modeling.

  11. Great improvement on tetracycline removal using ZnO rod-activated carbon fiber composite prepared with a facile microwave method

    Energy Technology Data Exchange (ETDEWEB)

    Tran Thi, Viet Ha; Lee, Byeong-Kyu, E-mail: bklee@ulsan.ac.kr

    2017-02-15

    Highlights: • ZnO rod-ACF was prepared by a method involving a microwave within only 3 min. • ZnO rods (average diameter of 0.3–0.5 μm, length of 1.0–1.5 μm) were grown on ACF. • 99% of tetracycline was degraded and 90.7% TOC was removed within 1 h under UV light. • ZnO rod-ACF achieved high performances even after three cycles of uses. - Abstract: New composite materials of activated carbon fiber (ACF) coated with zinc oxide (ZnO) were obtained by applying a green, cost-effective and rapid synthetic route using a commercial microwave oven. ZnO rods with a uniform and stable structure and an average diameter of 0.3–0.5 μm and length of 1.0–1.5 μm were achieved after only 3-min microwave treatment. The properties of ZnO were efficiently transferred to ACF, such that the resulting material, termed ZnO rod-ACF, demonstrated a promising potential as an efficient photocatalyst and simultaneously as an adsorbent. Pharmaceutical tetracycline at a concentration of 40 mg/L was used to evaluate the organic pollutant removal capacity of the synthesized materials. At pH 8, ZnO rod-ACF exhibited excellent removal capacity (over 99%) and mineralization (90.7%) of tetracycline in aqueous solution within 1 h under UV irradiation. The stability of ZnO rod-ACF was maintained and the mineralization of tetracycline was also maintained at 81.35% after multiple usage cycles. The photodegradation pathways of tetracycline were proposed based on the identified reaction intermediates.

  12. Great Lakes Energy Institute

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, J. Iwan [Case Western Reserve Univ., Cleveland, OH (United States)

    2012-11-18

    The vision of the Great Lakes Energy Institute is to enable the transition to advanced, sustainable energy generation, storage, distribution and utilization through coordinated research, development, and education. The Institute will place emphasis on translating leading edge research into next generation energy technology. The Institute’s research thrusts focus on coordinated research in decentralized power generation devices (e.g. fuel cells, wind turbines, solar photovoltaic devices), management of electrical power transmission and distribution, energy storage, and energy efficiency.

  13. A different approach to estimate nonlinear regression model using numerical methods

    Science.gov (United States)

    Mahaboob, B.; Venkateswarlu, B.; Mokeshrayalu, G.; Balasiddamuni, P.

    2017-11-01

    This research paper concerns with the computational methods namely the Gauss-Newton method, Gradient algorithm methods (Newton-Raphson method, Steepest Descent or Steepest Ascent algorithm method, the Method of Scoring, the Method of Quadratic Hill-Climbing) based on numerical analysis to estimate parameters of nonlinear regression model in a very different way. Principles of matrix calculus have been used to discuss the Gradient-Algorithm methods. Yonathan Bard [1] discussed a comparison of gradient methods for the solution of nonlinear parameter estimation problems. However this article discusses an analytical approach to the gradient algorithm methods in a different way. This paper describes a new iterative technique namely Gauss-Newton method which differs from the iterative technique proposed by Gorden K. Smyth [2]. Hans Georg Bock et.al [10] proposed numerical methods for parameter estimation in DAE’s (Differential algebraic equation). Isabel Reis Dos Santos et al [11], Introduced weighted least squares procedure for estimating the unknown parameters of a nonlinear regression metamodel. For large-scale non smooth convex minimization the Hager and Zhang (HZ) conjugate gradient Method and the modified HZ (MHZ) method were presented by Gonglin Yuan et al [12].

  14. Assessing different parameters estimation methods of Weibull distribution to compute wind power density

    International Nuclear Information System (INIS)

    Mohammadi, Kasra; Alavi, Omid; Mostafaeipour, Ali; Goudarzi, Navid; Jalilvand, Mahdi

    2016-01-01

    Highlights: • Effectiveness of six numerical methods is evaluated to determine wind power density. • More appropriate method for computing the daily wind power density is estimated. • Four windy stations located in the south part of Alberta, Canada namely is investigated. • The more appropriate parameters estimation method was not identical among all examined stations. - Abstract: In this study, the effectiveness of six numerical methods is evaluated to determine the shape (k) and scale (c) parameters of Weibull distribution function for the purpose of calculating the wind power density. The selected methods are graphical method (GP), empirical method of Justus (EMJ), empirical method of Lysen (EML), energy pattern factor method (EPF), maximum likelihood method (ML) and modified maximum likelihood method (MML). The purpose of this study is to identify the more appropriate method for computing the wind power density in four stations distributed in Alberta province of Canada namely Edmonton City Center Awos, Grande Prairie A, Lethbridge A and Waterton Park Gate. To provide a complete analysis, the evaluations are performed on both daily and monthly scales. The results indicate that the precision of computed wind power density values change when different parameters estimation methods are used to determine the k and c parameters. Four methods of EMJ, EML, EPF and ML present very favorable efficiency while the GP method shows weak ability for all stations. However, it is found that the more effective method is not similar among stations owing to the difference in the wind characteristics.

  15. Experimental comparison of phase retrieval methods which use intensity distribution at different planes

    International Nuclear Information System (INIS)

    Shevkunov, I A; Petrov, N V

    2014-01-01

    Performance of the three phase retrieval methods that use spatial intensity distributions was investigated in dealing with a task of reconstruction of the amplitude characteristics of the test object. These methods differ both by mathematical models and order of iteration execution. The single-beam multiple-intensity reconstruction method showed the best efficiency in terms of quality of reconstruction and time consumption.

  16. Comparative testing of different methods for evaluation of Varroa destructor infestation of honey bee colonies

    Directory of Open Access Journals (Sweden)

    Nikolay D. Dobrynin

    2011-09-01

    Full Text Available Different methods for evaluation of the degree of Varroa destructor infestation of honey bee colonies were tested. The methods using in vivo evaluation were the most sparing for the bees but less precise. The methods using evaluation with the killing of the bees or brood were the most precise but less sparing for bees.

  17. Comparison of different methods for the solution of sets of linear equations

    International Nuclear Information System (INIS)

    Bilfinger, T.; Schmidt, F.

    1978-06-01

    The application of the conjugate-gradient methods as novel general iterative methods for the solution of sets of linear equations with symmetrical systems matrices led to this paper, where a comparison of these methods with the conventional differently accelerated Gauss-Seidel iteration was carried out. In additon, the direct Cholesky method was also included in the comparison. The studies referred mainly to memory requirement, computing time, speed of convergence, and accuracy of different conditions of the systems matrices, by which also the sensibility of the methods with respect to the influence of truncation errors may be recognized. (orig.) 891 RW [de

  18. Introduction to the Finite-Difference Time-Domain (FDTD) Method for Electromagnetics

    CERN Document Server

    Gedney, Stephen

    2011-01-01

    Introduction to the Finite-Difference Time-Domain (FDTD) Method for Electromagnetics provides a comprehensive tutorial of the most widely used method for solving Maxwell's equations -- the Finite Difference Time-Domain Method. This book is an essential guide for students, researchers, and professional engineers who want to gain a fundamental knowledge of the FDTD method. It can accompany an undergraduate or entry-level graduate course or be used for self-study. The book provides all the background required to either research or apply the FDTD method for the solution of Maxwell's equations to p

  19. The study of diagnostic accuracy of chest nodules by using different compression methods

    International Nuclear Information System (INIS)

    Liang Zhigang; Kuncheng, L.I.; Zhang Jinghong; Liu Shuliang

    2005-01-01

    Background: The purpose of this study was to compare the diagnostic accuracy of small nodules in the chest by using different compression methods. Method: Two radiologists with 5 years experience twice interpreted 39 chest images by using lossless and lossy compression methods. The time interval was 3 weeks. Each time the radiologists interpreted one kind of compressed images. The image browser used the Unisight software provided by Atlastiger Company in Shanghai. The interpreting results were analyzed by the ROCKIT software and the ROC curves were painted by Excel 2002. Results: In studies of receiver operating characteristics for scoring the presence or absence of nodules, the images with lossy compression method showed no statistical difference as compared with the images with lossless compression method. Conclusion: The diagnostic accuracy of chest nodules by using the lossless and lossy compression methods had no significant difference, we could use the lossy compression method to transmit and archive the chest images with nodules

  20. An Algebraic Method for Constructing Exact Solutions to Difference-Differential Equations

    International Nuclear Information System (INIS)

    Wang Zhen; Zhang Hongqing

    2006-01-01

    In this paper, we present a method to solve difference differential equation(s). As an example, we apply this method to discrete KdV equation and Ablowitz-Ladik lattice equation. As a result, many exact solutions are obtained with the help of Maple including soliton solutions presented by hyperbolic functions sinh and cosh, periodic solutions presented by sin and cos and rational solutions. This method can also be used to other nonlinear difference-differential equation(s).

  1. Formulation and Application of Optimal Homotopty Asymptotic Method to Coupled Differential - Difference Equations

    Science.gov (United States)

    Ullah, Hakeem; Islam, Saeed; Khan, Ilyas; Shafie, Sharidan; Fiza, Mehreen

    2015-01-01

    In this paper we applied a new analytic approximate technique Optimal Homotopy Asymptotic Method (OHAM) for treatment of coupled differential- difference equations (DDEs). To see the efficiency and reliability of the method, we consider Relativistic Toda coupled nonlinear differential-difference equation. It provides us a convenient way to control the convergence of approximate solutions when it is compared with other methods of solution found in the literature. The obtained solutions show that OHAM is effective, simpler, easier and explicit. PMID:25874457

  2. Formulation and application of optimal homotopty asymptotic method to coupled differential-difference equations.

    Science.gov (United States)

    Ullah, Hakeem; Islam, Saeed; Khan, Ilyas; Shafie, Sharidan; Fiza, Mehreen

    2015-01-01

    In this paper we applied a new analytic approximate technique Optimal Homotopy Asymptotic Method (OHAM) for treatment of coupled differential-difference equations (DDEs). To see the efficiency and reliability of the method, we consider Relativistic Toda coupled nonlinear differential-difference equation. It provides us a convenient way to control the convergence of approximate solutions when it is compared with other methods of solution found in the literature. The obtained solutions show that OHAM is effective, simpler, easier and explicit.

  3. Parallel iterative procedures for approximate solutions of wave propagation by finite element and finite difference methods

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. [Purdue Univ., West Lafayette, IN (United States)

    1994-12-31

    Parallel iterative procedures based on domain decomposition techniques are defined and analyzed for the numerical solution of wave propagation by finite element and finite difference methods. For finite element methods, in a Lagrangian framework, an efficient way for choosing the algorithm parameter as well as the algorithm convergence are indicated. Some heuristic arguments for finding the algorithm parameter for finite difference schemes are addressed. Numerical results are presented to indicate the effectiveness of the methods.

  4. Numerical simulation of electromagnetic waves in Schwarzschild space-time by finite difference time domain method and Green function method

    Science.gov (United States)

    Jia, Shouqing; La, Dongsheng; Ma, Xuelian

    2018-04-01

    The finite difference time domain (FDTD) algorithm and Green function algorithm are implemented into the numerical simulation of electromagnetic waves in Schwarzschild space-time. FDTD method in curved space-time is developed by filling the flat space-time with an equivalent medium. Green function in curved space-time is obtained by solving transport equations. Simulation results validate both the FDTD code and Green function code. The methods developed in this paper offer a tool to solve electromagnetic scattering problems.

  5. The Influence of Different Processing Methods on Component Content of Sophora japonica

    Science.gov (United States)

    Ji, Y. B.; Zhu, H. J.; Xin, G. S.; Wei, C.

    2017-12-01

    The purpose of this experiment is to understand the effect of different processing methods on the content of active ingredients in Sophora japonica, and to determine the content of rutin and quercetin in Sophora japonica under different processing methods by UV spectrophotometry of the content determination. So as to compare the effect of different processing methods on the active ingredient content of Sophora japonica. Experiments can be seen in the rutin content: Fried Sophora japonica>Vinegar sunburn Sophora> Health products Sophora japonica> Charred sophora flower, Vinegar sunburn Sophora and Fried Sophora japonica difference is not obvious; Quercetin content: Charred sophora flower> Fried Sophora japonica> Vinegar sunburn Sophora>Health products Sophora japonica. It is proved that there are some differences in the content of active ingredients in Sophora japonica in different processing methods. The content of rutin increased with the increase of the processing temperature, but the content decreased after a certain temperature; Quercetin content will increase gradually with time.

  6. Chemometric approach for development, optimization, and validation of different chromatographic methods for separation of opium alkaloids.

    Science.gov (United States)

    Acevska, J; Stefkov, G; Petkovska, R; Kulevanova, S; Dimitrovska, A

    2012-05-01

    The excessive and continuously growing interest in the simultaneous determination of poppy alkaloids imposes the development and optimization of convenient high-throughput methods for the assessment of the qualitative and quantitative profile of alkaloids in poppy straw. Systematic optimization of two chromatographic methods (gas chromatography (GC)/flame ionization detector (FID)/mass spectrometry (MS) and reversed-phase (RP)-high-performance liquid chromatography (HPLC)/diode array detector (DAD)) for the separation of alkaloids from Papaver somniferum L. (Papaveraceae) was carried out. The effects of various conditions on the predefined chromatographic descriptors were investigated using chemometrics. A full factorial linear design of experiments for determining the relationship between chromatographic conditions and the retention behavior of the analytes was used. Central composite circumscribed design was utilized for the final method optimization. By conducting the optimization of the methods in very rational manner, a great deal of excessive and unproductive laboratory research work was avoided. The developed chromatographic methods were validated and compared in line with the resolving power, sensitivity, accuracy, speed, cost, ecological aspects, and compatibility with the poppy straw extraction procedure. The separation of the opium alkaloids using the GC/FID/MS method was achieved within 10 min, avoiding any derivatization step. This method has a stronger resolving power, shorter analysis time, better cost/effectiveness factor than the RP-HPLC/DAD method and is in line with the "green trend" of the analysis. The RP-HPLC/DAD method on the other hand displayed better sensitivity for all tested alkaloids. The proposed methods provide both fast screening and an accurate content assessment of the six alkaloids in the poppy samples obtained from the selection program of Papaver strains.

  7. Different methods for ethical analysis in health technology assessment: an empirical study.

    Science.gov (United States)

    Saarni, Samuli I; Braunack-Mayer, Annette; Hofmann, Bjørn; van der Wilt, Gert Jan

    2011-10-01

    Ethical analysis can highlight important ethical issues related to implementing a technology, values inherent in the technology itself, and value-decisions underlying the health technology assessment (HTA) process. Ethical analysis is a well-acknowledged part of HTA, yet seldom included in practice. One reason for this is lack of knowledge about the properties and differences between the methods available. This study compares different methods for ethical analysis within HTA. Ethical issues related to bariatric (obesity) surgery were independently evaluated using axiological, casuist, principlist, and EUnetHTA models for ethical analysis within HTA. The methods and results are presented and compared. Despite varying theoretical underpinnings and practical approaches, the four methods identified similar themes: personal responsibility, self-infliction, discrimination, justice, public funding, and stakeholder involvement. The axiological and EUnetHTA models identified a wider range of arguments, whereas casuistry and principlism concentrated more on analyzing a narrower set of arguments deemed more important. Different methods can be successfully used for conducting ethical analysis within HTA. Although our study does not show that different methods in ethics always produce similar results, it supports the view that different methods of ethics can yield relevantly similar results. This suggests that the key conclusions of ethical analyses within HTA can be transferable between methods and countries. The systematic and transparent use of some method of ethics appears more important than the choice of the exact method.

  8. Great Books. What Works Clearinghouse Intervention Report

    Science.gov (United States)

    What Works Clearinghouse, 2011

    2011-01-01

    "Great Books" is a program that aims to improve the reading, writing, and critical thinking skills of students in kindergarten through high school. The program is implemented as a core or complementary curriculum and is based on the Shared Inquiry[TM] method of learning. The purpose of "Great Books" is to engage students in…

  9. A functional-analytic method for the study of difference equations

    Directory of Open Access Journals (Sweden)

    Siafarikas Panayiotis D

    2004-01-01

    Full Text Available We will give the generalization of a recently developed functional-analytic method for studying linear and nonlinear, ordinary and partial, difference equations in the and spaces, p∈ℕ, . The method will be illustrated by use of two examples concerning a nonlinear ordinary difference equation known as the Putnam equation, and a linear partial difference equation of three variables describing the discrete Newton law of cooling in three dimensions.

  10. A difference quotient-numerical integration method for solving radiative transfer problems

    International Nuclear Information System (INIS)

    Ding Peizhu

    1992-01-01

    A difference quotient-numerical integration method is adopted to solve radiative transfer problems in an anisotropic scattering slab medium. By using the method, the radiative transfer problem is separated into a system of linear algebraic equations and the coefficient matrix of the system is a band matrix, so the method is very simple to evaluate on computer and to deduce formulae and easy to master for experimentalists. An example is evaluated and it is shown that the method is precise

  11. Study and comparison of different methods control in light water critical facility

    International Nuclear Information System (INIS)

    Michaiel, M.L.; Mahmoud, M.S.

    1980-01-01

    The control of nuclear reactors, may be studied using several control methods, such as control by rod absorbers, by inserting or removing fuel rods (moderator cavities), or by changing reflector thickness. Every method has its advantage, the comparison between these different methods and their effect on the reactivity of a reactor is the purpose of this work. A computer program is written by the authors to calculate the critical radius and worth in any case of the three precedent methods of control

  12. Reduction of cyanide levels in sweet cassava leaves grown in Busia County, Kenya based on different processing methods

    Directory of Open Access Journals (Sweden)

    Ojiambo, O.C.

    2017-05-01

    Full Text Available Cassava (Manihot esculenta Crantz, is the third most important carbohydrate food source around the world and in particular in sub-Sahara Africa. Both the roots and leaves have dual antagonistic contribution of which; one being nutritional value and secondly, contain cyanogenic glycosides. The latter when hydrolyzed by linamarase produces poisonous hydrogen cyanide attributed to among other factors, the methods of processing. Little has been reported on processing methods and information downstream will be great given the toxicity. This report assessed the variation of cyanide levels following different processing methods of leaves of sweet cassava varieties. A number of conditions were varied to mimic affordable and as well sustainable processing methods. Processing prior to boiling for up to 25 minutes involved leaves being pounded and pounded then soaked in water. Determination of cyanide was done using picrate papers and UV-Vis spectrophotometer. The cyanide levels ranged from 576.30 ± 0.32 - 128.34 ± 0.34 mg HCN Equivalence/Kg in raw cassava leaves that significantly reduced up to 88.45% with the processing’s (P< 0.001. Longer duration of boiling cassava leaves with prior processings’ of pounding and that of pounding and soaking is promoted to minimize the risks associated with cyanide poisoning.

  13. Analysis for pressure transient of coalbed methane reservoir based on Laplace transform finite difference method

    Directory of Open Access Journals (Sweden)

    Lei Wang

    2015-09-01

    Full Text Available Based on fractal geometry, fractal medium of coalbed methane mathematical model is established by Langmuir isotherm adsorption formula, Fick's diffusion law, Laplace transform formula, considering the well bore storage effect and skin effect. The Laplace transform finite difference method is used to solve the mathematical model. With Stehfest numerical inversion, the distribution of dimensionless well bore flowing pressure and its derivative was obtained in real space. According to compare with the results from the analytical method, the result from Laplace transform finite difference method turns out to be accurate. The influence factors are analyzed, including fractal dimension, fractal index, skin factor, well bore storage coefficient, energy storage ratio, interporosity flow coefficient and the adsorption factor. The calculating error of Laplace transform difference method is small. Laplace transform difference method has advantages in well-test application since any moment simulation does not rely on other moment results and space grid.

  14. Impact Strength of Natural Fibre Composites Measured by Different Test Methods: A Review

    Directory of Open Access Journals (Sweden)

    Navaranjan Namasivayam

    2017-01-01

    Full Text Available Different types of impact test methods have been used in recent years to measure the impact resistance of natural fibre composites (NFCs. After reviewing the literature, the impact resistance of flax, hemp, sisal, wood and jute fibre composites that were measured using different test methods have been compared and discussed. It has been learned that the test methods were selected for research interest, industry requirement or availability of test equipment. Each method had its own advantages and limitations. The result from a particular test could be compared but not with the result from other test methods. Most impact test methods were developed for testing ductile-brittle transition of metals. However, each NFC has a different morphology and cannot be comparable to metals in failure mode and energy absorption characteristic during an impact test. A post evaluation of morphology of an NFC sample after an impact test is important to characterise the material.

  15. A Preliminary Study of the Effectiveness of Different Recitation Teaching Methods

    Science.gov (United States)

    Endorf, Robert J.; Koenig, Kathleen M.; Braun, Gregory A.

    2006-02-01

    We present preliminary results from a comparative study of student understanding for students who attended recitation classes which used different teaching methods. Student volunteers from our introductory calculus-based physics course attended a special recitation class that was taught using one of four different teaching methods. A total of 272 students were divided into approximately equal groups for each method. Students in each class were taught the same topic, "Changes in energy and momentum," from Tutorials in Introductory Physics. The different teaching methods varied in the amount of student and teacher engagement. Student understanding was evaluated through pretests and posttests given at the recitation class. Our results demonstrate the importance of the instructor's role in teaching recitation classes. The most effective teaching method was for students working in cooperative learning groups with the instructors questioning the groups using Socratic dialogue. These results provide guidance and evidence for the teaching methods which should be emphasized in training future teachers and faculty members.

  16. Idiopathic great saphenous phlebosclerosis.

    Directory of Open Access Journals (Sweden)

    Ahmadreza Jodati

    2013-06-01

    Full Text Available Arterial sclerosis has been extensively described but reports on venous sclerosis are very sparse. Phlebosclerosis refers to the thickening and hardening of the venous wall. Despite its morphological similarities with arteriosclerosis and potential morbid consequences, phlebosclerosis has gained only little attention. We report a 72 year old male with paralysis and atrophy of the right leg due to childhood poliomyelitis who was referred for coronary artery bypass surgery. The great saphenous vein, harvested from the left leg, showed a hardened cord-like obliterated vein. Surprisingly, harvested veins from the atrophic limb were normal and successfully used for grafting.

  17. Making Psychotherapy Great Again?

    Science.gov (United States)

    Plakun, Eric M

    2017-05-01

    Psychotherapy never stopped being as "great" as other treatments. This column explores the evidence base for both psychotherapy and medications, using depression as a specific example. The limitations are comparable for psychotherapy and medication, with much of the evidence based on small degrees of "statistically significant" rather than "clinically meaningful" change. Our field's biomedical emphasis leads to a false assumption that most patients present with single disorders, when comorbidity is the rule rather than the exception. This false assumption contributes to limitations in the evidence base and in our ability to treat patients optimally.

  18. Phase difference estimation method based on data extension and Hilbert transform

    International Nuclear Information System (INIS)

    Shen, Yan-lin; Tu, Ya-qing; Chen, Lin-jun; Shen, Ting-ao

    2015-01-01

    To improve the precision and anti-interference performance of phase difference estimation for non-integer periods of sampling signals, a phase difference estimation method based on data extension and Hilbert transform is proposed. Estimated phase difference is obtained by means of data extension, Hilbert transform, cross-correlation, auto-correlation, and weighted phase average. Theoretical analysis shows that the proposed method suppresses the end effects of Hilbert transform effectively. The results of simulations and field experiments demonstrate that the proposed method improves the anti-interference performance of phase difference estimation and has better performance of phase difference estimation than the correlation, Hilbert transform, and data extension-based correlation methods, which contribute to improving the measurement precision of the Coriolis mass flowmeter. (paper)

  19. Comparison of different methods to extract the required coefficient of friction for level walking.

    Science.gov (United States)

    Chang, Wen-Ruey; Chang, Chien-Chi; Matz, Simon

    2012-01-01

    The required coefficient of friction (RCOF) is an important predictor for slip incidents. Despite the wide use of the RCOF there is no standardised method for identifying the RCOF from ground reaction forces. This article presents a comparison of the outcomes from seven different methods, derived from those reported in the literature, for identifying the RCOF from the same data. While commonly used methods are based on a normal force threshold, percentage of stance phase or time from heel contact, a newly introduced hybrid method is based on a combination of normal force, time and direction of increase in coefficient of friction. Although no major differences were found with these methods in more than half the strikes, significant differences were found in a significant portion of strikes. Potential problems with some of these methods were identified and discussed and they appear to be overcome by the hybrid method. No standard method exists for determining the required coefficient of friction (RCOF), an important predictor for slipping. In this study, RCOF values from a single data set, using various methods from the literature, differed considerably for a significant portion of strikes. A hybrid method may yield improved results.

  20. Methods and Measures: Growth Mixture Modeling--A Method for Identifying Differences in Longitudinal Change among Unobserved Groups

    Science.gov (United States)

    Ram, Nilam; Grimm, Kevin J.

    2009-01-01

    Growth mixture modeling (GMM) is a method for identifying multiple unobserved sub-populations, describing longitudinal change within each unobserved sub-population, and examining differences in change among unobserved sub-populations. We provide a practical primer that may be useful for researchers beginning to incorporate GMM analysis into their…

  1. Developmental Competence and Epigenetic Profile of Porcine Embryos Produced by Two Different Cloning Methods.

    Science.gov (United States)

    Liu, Ying; Lucas-Hahn, Andrea; Petersen, Bjoern; Li, Rong; Hermann, Doris; Hassel, Petra; Ziegler, Maren; Larsen, Knud; Niemann, Heiner; Callesen, Henrik

    2017-06-01

    The "Dolly" based cloning (classical nuclear transfer, [CNT]) and the handmade cloning (HMC) are methods that are nowadays routinely used for somatic cloning of large domestic species. Both cloning protocols share several similarities, but differ with regard to the required in vitro culture, which in turn results in different time intervals until embryo transfer. It is not yet known whether the differences between cloned embryos from the two protocols are due to the cloning methods themselves or the in vitro culture, as some studies have shown detrimental effects of in vitro culture on conventionally produced embryos. The goal of this study was to unravel putative differences between two cloning methods, with regard to developmental competence, expression profile of a panel of developmentally important genes and epigenetic profile of porcine cloned embryos produced by either CNT or HMC, either with (D5 or D6) or without (D0) in vitro culture. Embryos cloned by these two methods had a similar morphological appearance on D0, but displayed different cleavage rates and different quality of blastocysts, with HMC embryos showing higher blastocyst rates (HMC vs. CNT: 35% vs. 10%, p cloned embryos were similar on D0, but differed on D6. In conclusion, both cloning methods and the in vitro culture may affect porcine embryo development and epigenetic profile. The two cloning methods essentially produce embryos of similar quality on D0 and after 5 days in vitro culture, but thereafter both histone acetylation and gene expression differ between the two types of cloned embryos.

  2. Modeling brook trout presence and absence from landscape variables using four different analytical methods

    Science.gov (United States)

    Steen, Paul J.; Passino-Reader, Dora R.; Wiley, Michael J.

    2006-01-01

    As a part of the Great Lakes Regional Aquatic Gap Analysis Project, we evaluated methodologies for modeling associations between fish species and habitat characteristics at a landscape scale. To do this, we created brook trout Salvelinus fontinalis presence and absence models based on four different techniques: multiple linear regression, logistic regression, neural networks, and classification trees. The models were tested in two ways: by application to an independent validation database and cross-validation using the training data, and by visual comparison of statewide distribution maps with historically recorded occurrences from the Michigan Fish Atlas. Although differences in the accuracy of our models were slight, the logistic regression model predicted with the least error, followed by multiple regression, then classification trees, then the neural networks. These models will provide natural resource managers a way to identify habitats requiring protection for the conservation of fish species.

  3. A seismic analysis for masonry constructions: The different schematization methods of masonry walls

    Science.gov (United States)

    Olivito, Renato. S.; Codispoti, Rosamaria; Scuro, Carmelo

    2017-11-01

    Seismic analysis of masonry structures is usually analyzed through the use of structural calculation software based on equivalent frames method or to macro-elements method. In these approaches, the masonry walls are divided into vertical elements, masonry walls, and horizontal elements, so-called spandrel elements, interconnected by rigid nodes. The aim of this work is to make a critical comparison between different schematization methods of masonry wall underlining the structural importance of the spandrel elements. In order to implement the methods, two different structural calculation software were used and an existing masonry building has been examined.

  4. 'Great Power Style' in China's Economic Policy

    DEFF Research Database (Denmark)

    Jiang, Yang

    2011-01-01

    China’s ascendance attracts concern, even though Beijing claims to be a responsible great power and tries to demonstrate its ‘great power style’ in economic diplomacy. This article therefore discusses the following questions: to what extent does the current notion and practice of Chinese ‘great...... power style’ in economic diplomacy comply with, or differ from, the criteria of benign hegemony; and what are the major constraining factors? Conceptually, China’s ‘great power style’ is rooted in ancient Chinese political philosophy and institution, but it highly resembles the Western notion of benign...

  5. Biexponential analysis of diffusion-weighted imaging: comparison of three different calculation methods in transplanted kidneys.

    Science.gov (United States)

    Heusch, Philipp; Wittsack, Hans-Jörg; Pentang, Gael; Buchbender, Christian; Miese, Falk; Schek, Julia; Kröpil, Patric; Antoch, Gerald; Lanzman, Rotem S

    2013-12-01

    Biexponential analysis has been used increasingly to obtain contributions of both diffusion and microperfusion to the signal decay in diffusion-weighted imaging DWI of different parts of the body. To compare biexponential diffusion parameters of transplanted kidneys obtained with three different calculation methods. DWI was acquired in 15 renal allograft recipients (eight men, seven women; mean age, 52.4 ± 14.3 years) using a paracoronal EPI sequence with 16 b-values (b = 0-750 s/mm(2)) and six averages at 1.5T. No respiratory gating was used. Three different calculation methods were used for the calculation of biexponential diffusion parameters: Fp, ADCP, and ADCD were calculated without fixing any parameter a priori (calculation method 1); ADCP was fixed to 12.0 µm(2)/ms, whereas Fp and ADCD were calculated using the biexponential model (calculation method 2); multistep approach with monoexponential fitting of the high b-value portion (b ≥ 250 s/mm(2)) for determination of ADCD and assessment of the low b intercept for determination of Fp (calculation method 3). For quantitative analysis, ROI measurements were performed on the according parameter maps. Mean ADCD values of the renal cortex using calculation method 1 were significantly lower than using calculation methods 2 and 3 (P < 0.001). There was a significant correlation between calculation methods 1 and 2 (r = 0.69 (P < 0.005) and calculation methods 1 and 3 (r = 0.59; P < 0.05) as well as calculation methods 2 and 3 (r = 0.98; P < 0.001). Mean Fp values of the renal cortex were higher with calculation method 1 than with calculation methods 2 and 3 (P < 0.001). For Fp, only the correlation between calculation methods 2 and 3 was significant (r = 0.98; P < 0.001). Biexponential diffusion parameters differ significantly depending on the calculation methods used for their calculation.

  6. Solution of second order linear fuzzy difference equation by Lagrange's multiplier method

    Directory of Open Access Journals (Sweden)

    Sankar Prasad Mondal

    2016-06-01

    Full Text Available In this paper we execute the solution procedure for second order linear fuzzy difference equation by Lagrange's multiplier method. In crisp sense the difference equation are easy to solve, but when we take in fuzzy sense it forms a system of difference equation which is not so easy to solve. By the help of Lagrange's multiplier we can solved it easily. The results are illustrated by two different numerical examples and followed by two applications.

  7. Virtual screening applications: a study of ligand-based methods and different structure representations in four different scenarios.

    Science.gov (United States)

    Hristozov, Dimitar P; Oprea, Tudor I; Gasteiger, Johann

    2007-01-01

    Four different ligand-based virtual screening scenarios are studied: (1) prioritizing compounds for subsequent high-throughput screening (HTS); (2) selecting a predefined (small) number of potentially active compounds from a large chemical database; (3) assessing the probability that a given structure will exhibit a given activity; (4) selecting the most active structure(s) for a biological assay. Each of the four scenarios is exemplified by performing retrospective ligand-based virtual screening for eight different biological targets using two large databases--MDDR and WOMBAT. A comparison between the chemical spaces covered by these two databases is presented. The performance of two techniques for ligand--based virtual screening--similarity search with subsequent data fusion (SSDF) and novelty detection with Self-Organizing Maps (ndSOM) is investigated. Three different structure representations--2,048-dimensional Daylight fingerprints, topological autocorrelation weighted by atomic physicochemical properties (sigma electronegativity, polarizability, partial charge, and identity) and radial distribution functions weighted by the same atomic physicochemical properties--are compared. Both methods were found applicable in scenario one. The similarity search was found to perform slightly better in scenario two while the SOM novelty detection is preferred in scenario three. No method/descriptor combination achieved significant success in scenario four.

  8. Elastic frequency-domain finite-difference contrast source inversion method

    International Nuclear Information System (INIS)

    He, Qinglong; Chen, Yong; Han, Bo; Li, Yang

    2016-01-01

    In this work, we extend the finite-difference contrast source inversion (FD-CSI) method to the frequency-domain elastic wave equations, where the parameters describing the subsurface structure are simultaneously reconstructed. The FD-CSI method is an iterative nonlinear inversion method, which exhibits several strengths. First, the finite-difference operator only relies on the background media and the given angular frequency, both of which are unchanged during inversion. Therefore, the matrix decomposition is performed only once at the beginning of the iteration if a direct solver is employed. This makes the inversion process relatively efficient in terms of the computational cost. In addition, the FD-CSI method automatically normalizes different parameters, which could avoid the numerical problems arising from the difference of the parameter magnitude. We exploit a parallel implementation of the FD-CSI method based on the domain decomposition method, ensuring a satisfactory scalability for large-scale problems. A simple numerical example with a homogeneous background medium is used to investigate the convergence of the elastic FD-CSI method. Moreover, the Marmousi II model proposed as a benchmark for testing seismic imaging methods is presented to demonstrate the performance of the elastic FD-CSI method in an inhomogeneous background medium. (paper)

  9. Assessment of different quit smoking methods selected by patients in tobacco cessation centers in Iran

    Directory of Open Access Journals (Sweden)

    Gholamreza Heydari

    2015-01-01

    Full Text Available Background: Health systems play key roles in identifying tobacco users and providing evidence-based care to help them quit. This treatment includes different methods such as simple medical consultation, medication, and telephone counseling. To assess different quit smoking methods selected by patients in tobacco cessation centers in Iran in order to identify those that are most appropriate for the country health system. Methods: In this cross-sectional and descriptive study, a random sample of all quit centers at the country level was used to obtain a representative sample. Patients completed the self-administered questionnaire which contained 10 questions regarding the quality, cost, effect, side effects and the results of quitting methods using a 5-point Likert-type scale. Percentages, frequencies, mean, T-test, and variance analyses were computed for all study variables. Results: A total of 1063 smokers returned completed survey questionnaires. The most frequently used methods were Nicotine Replacement Therapy (NRT and combination therapy (NRT and Counseling with 228 and 163 individuals reporting these respectively. The least used methods were hypnotism (n = 8 and the quit and win (n = 17. The methods which gained the maximum scores were respectively the combined method, personal and Champix with means of 21.4, 20.4 and 18.4. The minimum scores were for e-cigarettes, hypnotism and education with means of 12.8, 11 and 10.8, respectively. There were significant differences in mean scores based on different cities and different methods. Conclusions: According to smokers′ selection the combined therapy, personal methods and Champix are the most effective methods for quit smoking and these methods could be much more considered in the country health system.

  10. Effect of Different Training Methods on Stride Parameters in Speed Maintenance Phase of 100-m Sprint Running.

    Science.gov (United States)

    Cetin, Emel; Hindistan, I Ethem; Ozkaya, Y Gul

    2018-05-01

    Cetin, E, Hindistan, IE, Ozkaya, YG. Effect of different training methods on stride parameters in speed maintenance phase of 100-m sprint running. J Strength Cond Res 32(5): 1263-1272, 2018-This study examined the effects of 2 different training methods relevant to sloping surface on stride parameters in speed maintenance phase of 100-m sprint running. Twenty recreationally active students were assigned into one of 3 groups: combined training (Com), horizontal training (H), and control (C) group. Com group performed uphill and downhill training on a sloping surface with an angle of 4°, whereas H group trained on a horizontal surface, 3 days a week for 8 weeks. Speed maintenance and deceleration phases were divided into distances with 10-m intervals, and running time (t), running velocity (RV), step frequency (SF), and step length (SL) were measured at preexercise, and postexercise period. After 8 weeks of training program, t was shortened by 3.97% in Com group, and 2.37% in H group. Running velocity also increased for totally 100 m of running distance by 4.13 and 2.35% in Com, and H groups, respectively. At the speed maintenance phase, although t and maximal RV (RVmax) found to be statistically unaltered during overall phase, t was found to be decreased, and RVmax was preceded by 10 m in distance in both training groups. Step length was increased at 60-70 m, and SF was decreased at 70-80 m in H group. Step length was increased with concomitant decrease in SF at 80-90 m in Com group. Both training groups maintained the RVmax with a great percentage at the speed maintenance phase. In conclusion, although both training methods resulted in an increase in running time and RV, Com training method was more prominently effective method in improving RV, and this improvement was originated from the positive changes in SL during the speed maintaining phase.

  11. A highly accurate finite-difference method with minimum dispersion error for solving the Helmholtz equation

    KAUST Repository

    Wu, Zedong

    2018-04-05

    Numerical simulation of the acoustic wave equation in either isotropic or anisotropic media is crucial to seismic modeling, imaging and inversion. Actually, it represents the core computation cost of these highly advanced seismic processing methods. However, the conventional finite-difference method suffers from severe numerical dispersion errors and S-wave artifacts when solving the acoustic wave equation for anisotropic media. We propose a method to obtain the finite-difference coefficients by comparing its numerical dispersion with the exact form. We find the optimal finite difference coefficients that share the dispersion characteristics of the exact equation with minimal dispersion error. The method is extended to solve the acoustic wave equation in transversely isotropic (TI) media without S-wave artifacts. Numerical examples show that the method is is highly accurate and efficient.

  12. Seismic wavefield modeling based on time-domain symplectic and Fourier finite-difference method

    Science.gov (United States)

    Fang, Gang; Ba, Jing; Liu, Xin-xin; Zhu, Kun; Liu, Guo-Chang

    2017-06-01

    Seismic wavefield modeling is important for improving seismic data processing and interpretation. Calculations of wavefield propagation are sometimes not stable when forward modeling of seismic wave uses large time steps for long times. Based on the Hamiltonian expression of the acoustic wave equation, we propose a structure-preserving method for seismic wavefield modeling by applying the symplectic finite-difference method on time grids and the Fourier finite-difference method on space grids to solve the acoustic wave equation. The proposed method is called the symplectic Fourier finite-difference (symplectic FFD) method, and offers high computational accuracy and improves the computational stability. Using acoustic approximation, we extend the method to anisotropic media. We discuss the calculations in the symplectic FFD method for seismic wavefield modeling of isotropic and anisotropic media, and use the BP salt model and BP TTI model to test the proposed method. The numerical examples suggest that the proposed method can be used in seismic modeling of strongly variable velocities, offering high computational accuracy and low numerical dispersion. The symplectic FFD method overcomes the residual qSV wave of seismic modeling in anisotropic media and maintains the stability of the wavefield propagation for large time steps.

  13. Non-standard finite difference and Chebyshev collocation methods for solving fractional diffusion equation

    Science.gov (United States)

    Agarwal, P.; El-Sayed, A. A.

    2018-06-01

    In this paper, a new numerical technique for solving the fractional order diffusion equation is introduced. This technique basically depends on the Non-Standard finite difference method (NSFD) and Chebyshev collocation method, where the fractional derivatives are described in terms of the Caputo sense. The Chebyshev collocation method with the (NSFD) method is used to convert the problem into a system of algebraic equations. These equations solved numerically using Newton's iteration method. The applicability, reliability, and efficiency of the presented technique are demonstrated through some given numerical examples.

  14. Nonuniform grid implicit spatial finite difference method for acoustic wave modeling in tilted transversely isotropic media

    KAUST Repository

    Chu, Chunlei; Stoffa, Paul L.

    2012-01-01

    sampled models onto vertically nonuniform grids. We use a 2D TTI salt model to demonstrate its effectiveness and show that the nonuniform grid implicit spatial finite difference method can produce highly accurate seismic modeling results with enhanced

  15. Comparison of different calibration methods suited for calibration problems with many variables

    DEFF Research Database (Denmark)

    Holst, Helle

    1992-01-01

    This paper describes and compares different kinds of statistical methods proposed in the literature as suited for solving calibration problems with many variables. These are: principal component regression, partial least-squares, and ridge regression. The statistical techniques themselves do...

  16. Stability and non-standard finite difference method of the generalized Chua's circuit

    KAUST Repository

    Radwan, Ahmed G.; Moaddy, K.; Momani, Shaher M.

    2011-01-01

    In this paper, we develop a framework to obtain approximate numerical solutions of the fractional-order Chua's circuit with Memristor using a non-standard finite difference method. Chaotic response is obtained with fractional-order elements as well

  17. Validation and application of an high-order spectral difference method for flow induced noise simulation

    KAUST Repository

    Parsani, Matteo; Ghorbaniasl, Ghader; Lacor, C.

    2011-01-01

    . The method is based on the Ffowcs WilliamsHawkings approach, which provides noise contributions for monopole, dipole and quadrupole acoustic sources. This paper will focus on the validation and assessment of this hybrid approach using different test cases

  18. Tracheal collapse diagnosed by multidetector computed tomography: evaluation of different image analysis methods

    DEFF Research Database (Denmark)

    Nygaard, Mette; Bendstrup, Elisabeth; Dahl, Ronald

    2017-01-01

    diseases when using an expiratory collapse of = 50% as a threshold. The four methods were comparable with highly significant Pearsons correlation coefficients (0.764-0.856). However, the four methods identified different patients with collapse of = 50 There was no correlation between symptoms...... and the degree of collapse. Conclusion: The different methods identify tracheal collapse in different patients. Hence, the diagnosis of excessive tracheal collapse can not rely solely on MDCT images. Generally, there is a poor correlation between symptoms and the degree of collapse in the different methods....... However, when using the maximal collapse, there is some correlation with symptoms. When in doubt regarding the diagnosis, further investigations, such as bronchoscopy, should be carried out....

  19. Directional spectrum of ocean waves from array measurements using phase/time/path difference methods

    Digital Repository Service at National Institute of Oceanography (India)

    Fernandes, A.A.; Sarma, Y.V.B.; Menon, H.B.

    Wave direction has for the first time been consistently, accurately and unambiguously evaluated from array measurements using the phase/time/path difference (PTPD) methods of Esteva in case of polygonal arrays and Borgman in case of linear arrays...

  20. Comparison of different wind data interpolation methods for a region with complex terrain in Central Asia

    Science.gov (United States)

    Reinhardt, Katja; Samimi, Cyrus

    2018-01-01

    While climatological data of high spatial resolution are largely available in most developed countries, the network of climatological stations in many other regions of the world still constitutes large gaps. Especially for those regions, interpolation methods are important tools to fill these gaps and to improve the data base indispensible for climatological research. Over the last years, new hybrid methods of machine learning and geostatistics have been developed which provide innovative prospects in spatial predictive modelling. This study will focus on evaluating the performance of 12 different interpolation methods for the wind components \\overrightarrow{u} and \\overrightarrow{v} in a mountainous region of Central Asia. Thereby, a special focus will be on applying new hybrid methods on spatial interpolation of wind data. This study is the first evaluating and comparing the performance of several of these hybrid methods. The overall aim of this study is to determine whether an optimal interpolation method exists, which can equally be applied for all pressure levels, or whether different interpolation methods have to be used for the different pressure levels. Deterministic (inverse distance weighting) and geostatistical interpolation methods (ordinary kriging) were explored, which take into account only the initial values of \\overrightarrow{u} and \\overrightarrow{v} . In addition, more complex methods (generalized additive model, support vector machine and neural networks as single methods and as hybrid methods as well as regression-kriging) that consider additional variables were applied. The analysis of the error indices revealed that regression-kriging provided the most accurate interpolation results for both wind components and all pressure heights. At 200 and 500 hPa, regression-kriging is followed by the different kinds of neural networks and support vector machines and for 850 hPa it is followed by the different types of support vector machine and

  1. A boundary-fitted staggered difference method for incompressible flow using Riemann geometry

    International Nuclear Information System (INIS)

    Koshizuka, Seiichi; Kondo, Shunsuke; Oka, Yoshiaki.

    1990-01-01

    A boundary-fitted staggered difference method (BFSDM) is investigated for incompressible flow in nuclear plants. BFSDM employs control cells for scalars, staggered location of velocity components, and integrated formulation of div=0. Governing equations are written as coordinate-free forms using Riemann geometry. Flow velocity is represented with contravariant physical components in the present method. Connection terms emerge as source terms in the coordinate-free governing equations. These terms are studied from the viewpoints of physical meaning, numerical stability, and conservative property. Some flows on a round or slant boundary are solved using boundary-fitted curvilinear (BFC) grids and rectangular grids to compare the present method and the rectangular-type (R-type) staggered difference method (SDM). Supercomputing of the present method, including vector processing, is also discussed compared with the R-type method. (author)

  2. Five-point form of the nodal diffusion method and comparison with finite-difference

    International Nuclear Information System (INIS)

    Azmy, Y.Y.

    1988-01-01

    Nodal Methods have been derived, implemented and numerically tested for several problems in physics and engineering. In the field of nuclear engineering, many nodal formalisms have been used for the neutron diffusion equation, all yielding results which were far more computationally efficient than conventional Finite Difference (FD) and Finite Element (FE) methods. However, not much effort has been devoted to theoretically comparing nodal and FD methods in order to explain the very high accuracy of the former. In this summary we outline the derivation of a simple five-point form for the lowest order nodal method and compare it to the traditional five-point, edge-centered FD scheme. The effect of the observed differences on the accuracy of the respective methods is established by considering a simple test problem. It must be emphasized that the nodal five-point scheme derived here is mathematically equivalent to previously derived lowest order nodal methods. 7 refs., 1 tab

  3. Effect of different cooking methods on total phenolic contents and antioxidant activities of four Boletus mushrooms.

    Science.gov (United States)

    Sun, Liping; Bai, Xue; Zhuang, Yongliang

    2014-11-01

    The influences of cooking methods (steaming, pressure-cooking, microwaving, frying and boiling) on total phenolic contents and antioxidant activities of fruit body of Boletus mushrooms (B. aereus, B. badius, B. pinophilus and B. edulis) have been evaluated. The results showed that microwaving was better in retention of total phenolics than other cooking methods, while boiling significantly decreased the contents of total phenolics in samples under study. Effects of different cooking methods on phenolic acids profiles of Boletus mushrooms showed varieties with both the species of mushroom and the cooking method. Effects of cooking treatments on antioxidant activities of Boletus mushrooms were evaluated by in vitro assays of hydroxyl radical (OH·) -scavenging activity, reducing power and 1, 1-diphenyl-2-picrylhydrazyl radicals (DPPH·) -scavenging activity. Results indicated the changes of antioxidant activities of four Boletus mushrooms were different in five cooking methods. This study could provide some information to encourage food industry to recommend particular cooking methods.

  4. Numerical study of water diffusion in biological tissues using an improved finite difference method

    International Nuclear Information System (INIS)

    Xu Junzhong; Does, Mark D; Gore, John C

    2007-01-01

    An improved finite difference (FD) method has been developed in order to calculate the behaviour of the nuclear magnetic resonance signal variations caused by water diffusion in biological tissues more accurately and efficiently. The algorithm converts the conventional image-based finite difference method into a convenient matrix-based approach and includes a revised periodic boundary condition which eliminates the edge effects caused by artificial boundaries in conventional FD methods. Simulated results for some modelled tissues are consistent with analytical solutions for commonly used diffusion-weighted pulse sequences, whereas the improved FD method shows improved efficiency and accuracy. A tightly coupled parallel computing approach was also developed to implement the FD methods to enable large-scale simulations of realistic biological tissues. The potential applications of the improved FD method for understanding diffusion in tissues are also discussed. (note)

  5. Comparison of three different prehospital wrapping methods for preventing hypothermia - a crossover study in humans

    Directory of Open Access Journals (Sweden)

    Zakariassen Erik

    2011-06-01

    Full Text Available Abstract Background Accidental hypothermia increases mortality and morbidity in trauma patients. Various methods for insulating and wrapping hypothermic patients are used worldwide. The aim of this study was to compare the thermal insulating effects and comfort of bubble wrap, ambulance blankets / quilts, and Hibler's method, a low-cost method combining a plastic outer layer with an insulating layer. Methods Eight volunteers were dressed in moistened clothing, exposed to a cold and windy environment then wrapped using one of the three different insulation methods in random order on three different days. They were rested quietly on their back for 60 minutes in a cold climatic chamber. Skin temperature, rectal temperature, oxygen consumption were measured, and metabolic heat production was calculated. A questionnaire was used for a subjective evaluation of comfort, thermal sensation, and shivering. Results Skin temperature was significantly higher 15 minutes after wrapping using Hibler's method compared with wrapping with ambulance blankets / quilts or bubble wrap. There were no differences in core temperature between the three insulating methods. The subjects reported more shivering, they felt colder, were more uncomfortable, and had an increased heat production when using bubble wrap compared with the other two methods. Hibler's method was the volunteers preferred method for preventing hypothermia. Bubble wrap was the least effective insulating method, and seemed to require significantly higher heat production to compensate for increased heat loss. Conclusions This study demonstrated that a combination of vapour tight layer and an additional dry insulating layer (Hibler's method is the most efficient wrapping method to prevent heat loss, as shown by increased skin temperatures, lower metabolic rate and better thermal comfort. This should then be the method of choice when wrapping a wet patient at risk of developing hypothermia in prehospital

  6. Great Britain at CERN

    CERN Multimedia

    2006-01-01

    From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Almat...

  7. Great Britain at CERN

    CERN Multimedia

    2006-01-01

    From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Alma...

  8. Precision evaluation of pressed pastille preparation different methods for X-ray fluorescence analysis

    International Nuclear Information System (INIS)

    Lima, Raquel Franco de Souza; Melo Junior, Germano; Sa, Jaziel Martins

    1997-01-01

    This work relates the comparison between the results obtained with the two different methods of preparing pressed pastilles from the crushed sample. In this study, the reproductivity is evaluated, aiming to define the method that furnishes a better analytic precision. These analyses were realized with a X-ray fluorescence spectrometer at the Geology Department of the Federal University of Rio Grande do Norte

  9. The effects of three different grinding methods in DNA extraction of ...

    African Journals Online (AJOL)

    uwerhiavwe

    2013-04-17

    Apr 17, 2013 ... The effects of three different grinding methods in DNA extraction of cowpea .... 100 mg of the leaf tissues were weighed in an electronic balance. CTAB method .... The primers were synthesized by Life Technologies (AB & Invitrogen). .... This work was supported by 'Shuang-Zhi Plan' of Sichuan. Agricultural ...

  10. How Learning Designs, Teaching Methods and Activities Differ by Discipline in Australian Universities

    Science.gov (United States)

    Cameron, Leanne

    2017-01-01

    This paper reports on the learning designs, teaching methods and activities most commonly employed within the disciplines in six universities in Australia. The study sought to establish if there were significant differences between the disciplines in learning designs, teaching methods and teaching activities in the current Australian context, as…

  11. Clustering Scientific Publications Based on Citation Relations: A Systematic Comparison of Different Methods.

    Science.gov (United States)

    Šubelj, Lovro; van Eck, Nees Jan; Waltman, Ludo

    2016-01-01

    Clustering methods are applied regularly in the bibliometric literature to identify research areas or scientific fields. These methods are for instance used to group publications into clusters based on their relations in a citation network. In the network science literature, many clustering methods, often referred to as graph partitioning or community detection techniques, have been developed. Focusing on the problem of clustering the publications in a citation network, we present a systematic comparison of the performance of a large number of these clustering methods. Using a number of different citation networks, some of them relatively small and others very large, we extensively study the statistical properties of the results provided by different methods. In addition, we also carry out an expert-based assessment of the results produced by different methods. The expert-based assessment focuses on publications in the field of scientometrics. Our findings seem to indicate that there is a trade-off between different properties that may be considered desirable for a good clustering of publications. Overall, map equation methods appear to perform best in our analysis, suggesting that these methods deserve more attention from the bibliometric community.

  12. Clustering Scientific Publications Based on Citation Relations: A Systematic Comparison of Different Methods

    Science.gov (United States)

    Šubelj, Lovro; van Eck, Nees Jan; Waltman, Ludo

    2016-01-01

    Clustering methods are applied regularly in the bibliometric literature to identify research areas or scientific fields. These methods are for instance used to group publications into clusters based on their relations in a citation network. In the network science literature, many clustering methods, often referred to as graph partitioning or community detection techniques, have been developed. Focusing on the problem of clustering the publications in a citation network, we present a systematic comparison of the performance of a large number of these clustering methods. Using a number of different citation networks, some of them relatively small and others very large, we extensively study the statistical properties of the results provided by different methods. In addition, we also carry out an expert-based assessment of the results produced by different methods. The expert-based assessment focuses on publications in the field of scientometrics. Our findings seem to indicate that there is a trade-off between different properties that may be considered desirable for a good clustering of publications. Overall, map equation methods appear to perform best in our analysis, suggesting that these methods deserve more attention from the bibliometric community. PMID:27124610

  13. Associations between different motivations for animal cruelty, methods of animal cruelty and facets of impulsivity

    OpenAIRE

    Newberry, Michelle

    2017-01-01

    Associations between specific motivations for animal cruelty, particular methods of animal cruelty and different facets of impulsivity were explored among 130 undergraduate students. Participants completed an adapted version of the Boat Inventory on Animal-Related Experiences (BIARE) which asked participants to state whether they had intentionally harmed or killed an animal, the species of animal(s) involved, their motivations for harming or killing the animal(s) and the method(s) used. Parti...

  14. Associations between different motivations for animal cruelty, methods of animal cruelty, and facets of impulsivity

    OpenAIRE

    Newberry, Michelle

    2018-01-01

    Associations between specific motivations for animal cruelty, particular methods of animal cruelty and different facets of impulsivity were explored among 130 undergraduate students. Participants completed an adapted version of the Boat Inventory on Animal-Related Experiences (BIARE) which asked participants to state whether they had intentionally harmed or killed an animal, the species of animal(s) involved, their motivations for harming or killing the animal(s) and the method(s) used. Parti...

  15. Diamond difference method with hybrid angular quadrature applied to neutron transport problems

    International Nuclear Information System (INIS)

    Zani, Jose H.; Barros, Ricardo C.; Alves Filho, Hermes

    2005-01-01

    In this work we presents the results for the calculations of the disadvantage factor in thermal nuclear reactor physics. We use the one-group discrete ordinates (S N ) equations to mathematically model the flux distributions in slab lattices. We apply the diamond difference method with source iteration iterative scheme to numerically solve the discretized systems equations. We used special interface conditions to describe the method with hybrid angular quadrature. We show numerical results to illustrate the accuracy of the hybrid method. (author)

  16. The influence of different black carbon and sulfate mixing methods on their optical and radiative properties

    Science.gov (United States)

    Zhang, Hua; Zhou, Chen; Wang, Zhili; Zhao, Shuyun; Li, Jiangnan

    2015-08-01

    Three different internal mixing methods (Core-Shell, Maxwell-Garnett, and Bruggeman) and one external mixing method are used to study the impact of mixing methods of black carbon (BC) with sulfate aerosol on their optical properties, radiative flux, and heating rate. The optical properties of a mixture of BC and sulfate aerosol particles are considered for three typical bands. The results show that mixing methods, the volume ratio of BC to sulfate, and relative humidity have a strong influence on the optical properties of mixed aerosols. Compared to internal mixing, external mixing underestimates the particle mass absorption coefficient by 20-70% and the particle mass scattering coefficient by up to 50%, whereas it overestimates the particle single scattering albedo by 20-50% in most cases. However, the asymmetry parameter is strongly sensitive to the equivalent particle radius, but is only weakly sensitive to the different mixing methods. Of the internal methods, there is less than 2% difference in all optical properties between the Maxwell-Garnett and Bruggeman methods in all bands; however, the differences between the Core-Shell and Maxwell-Garnett/Bruggeman methods are usually larger than 15% in the ultraviolet and visible bands. A sensitivity test is conducted with the Beijing Climate Center Radiation transfer model (BCC-RAD) using a simulated BC concentration that is typical of east-central China and a sulfate volume ratio of 75%. The results show that the internal mixing methods could reduce the radiative flux more effectively because they produce a higher absorption. The annual mean instantaneous radiative force due to BC-sulfate aerosol is about -3.18 W/m2 for the external method and -6.91 W/m2 for the internal methods at the surface, and -3.03/-1.56/-1.85 W/m2 for the external/Core-Shell/(Maxwell-Garnett/Bruggeman) methods, respectively, at the tropopause.

  17. Tensile strength of concrete under static and intermediate strain rates: Correlated results from different testing methods

    International Nuclear Information System (INIS)

    Wu Shengxing; Chen Xudong; Zhou Jikai

    2012-01-01

    Highlights: ► Tensile strength of concrete increases with increase in strain rate. ► Strain rate sensitivity of tensile strength of concrete depends on test method. ► High stressed volume method can correlate results from various test methods. - Abstract: This paper presents a comparative experiment and analysis of three different methods (direct tension, splitting tension and four-point loading flexural tests) for determination of the tensile strength of concrete under low and intermediate strain rates. In addition, the objective of this investigation is to analyze the suitability of the high stressed volume approach and Weibull effective volume method to the correlation of the results of different tensile tests of concrete. The test results show that the strain rate sensitivity of tensile strength depends on the type of test, splitting tensile strength of concrete is more sensitive to an increase in the strain rate than flexural and direct tensile strength. The high stressed volume method could be used to obtain a tensile strength value of concrete, free from the influence of the characteristics of tests and specimens. However, the Weibull effective volume method is an inadequate method for describing failure of concrete specimens determined by different testing methods.

  18. Relative and Absolute Error Control in a Finite-Difference Method Solution of Poisson's Equation

    Science.gov (United States)

    Prentice, J. S. C.

    2012-01-01

    An algorithm for error control (absolute and relative) in the five-point finite-difference method applied to Poisson's equation is described. The algorithm is based on discretization of the domain of the problem by means of three rectilinear grids, each of different resolution. We discuss some hardware limitations associated with the algorithm,…

  19. Partial differential equation techniques for analysing animal movement: A comparison of different methods.

    Science.gov (United States)

    Wang, Yi-Shan; Potts, Jonathan R

    2017-03-07

    Recent advances in animal tracking have allowed us to uncover the drivers of movement in unprecedented detail. This has enabled modellers to construct ever more realistic models of animal movement, which aid in uncovering detailed patterns of space use in animal populations. Partial differential equations (PDEs) provide a popular tool for mathematically analysing such models. However, their construction often relies on simplifying assumptions which may greatly affect the model outcomes. Here, we analyse the effect of various PDE approximations on the analysis of some simple movement models, including a biased random walk, central-place foraging processes and movement in heterogeneous landscapes. Perhaps the most commonly-used PDE method dates back to a seminal paper of Patlak from 1953. However, our results show that this can be a very poor approximation in even quite simple models. On the other hand, more recent methods, based on transport equation formalisms, can provide more accurate results, as long as the kernel describing the animal's movement is sufficiently smooth. When the movement kernel is not smooth, we show that both the older and newer methods can lead to quantitatively misleading results. Our detailed analysis will aid future researchers in the appropriate choice of PDE approximation for analysing models of animal movement. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Metagenomic survey of bacterial diversity in the atmosphere of Mexico City using different sampling methods.

    Science.gov (United States)

    Serrano-Silva, N; Calderón-Ezquerro, M C

    2018-04-01

    The identification of airborne bacteria has traditionally been performed by retrieval in culture media, but the bacterial diversity in the air is underestimated using this method because many bacteria are not readily cultured. Advances in DNA sequencing technology have produced a broad knowledge of genomics and metagenomics, which can greatly improve our ability to identify and study the diversity of airborne bacteria. However, researchers are facing several challenges, particularly the efficient retrieval of low-density microorganisms from the air and the lack of standardized protocols for sample collection and processing. In this study, we tested three methods for sampling bioaerosols - a Durham-type spore trap (Durham), a seven-day recording volumetric spore trap (HST), and a high-throughput 'Jet' spore and particle sampler (Jet) - and recovered metagenomic DNA for 16S rDNA sequencing. Samples were simultaneously collected with the three devices during one week, and the sequencing libraries were analyzed. A simple and efficient method for collecting bioaerosols and extracting good quality DNA for high-throughput sequencing was standardized. The Durham sampler collected preferentially Cyanobacteria, the HST Actinobacteria, Proteobacteria and Firmicutes, and the Jet mainly Proteobacteria and Firmicutes. The HST sampler collected the largest amount of airborne bacterial diversity. More experiments are necessary to select the right sampler, depending on study objectives, which may require monitoring and collecting specific airborne bacteria. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Very Weak Signals (VWS detected by stacking method according to different astronomical periodicities (HiCum

    Directory of Open Access Journals (Sweden)

    M. van Ruymbeke

    2007-11-01

    Full Text Available A stacking method to detect very weak signals is introduced in this paper. This method is to stack observed data in different well known periodicities according to the astronomical clock since majority geophysical observations are time based. We validated this method by applying it in four different cases. Interactions behind the observed parameters become obviously after it is stacked in two diurnal and semidiurnal tidal periodical waves. Amplitude and phase variations will be also measurable when a sliding windows stacking is used. This could be an important reference to find precursors before some earthquakes and volcanic events, corresponding to attenuations of medium patterns.

  2. Comparison of Different Recruitment Methods for Sexual and Reproductive Health Research: Social Media-Based Versus Conventional Methods.

    Science.gov (United States)

    Motoki, Yoko; Miyagi, Etsuko; Taguri, Masataka; Asai-Sato, Mikiko; Enomoto, Takayuki; Wark, John Dennis; Garland, Suzanne Marie

    2017-03-10

    Prior research about the sexual and reproductive health of young women has relied mostly on self-reported survey studies. Thus, participant recruitment using Web-based methods can improve sexual and reproductive health research about cervical cancer prevention. In our prior study, we reported that Facebook is a promising way to reach young women for sexual and reproductive health research. However, it remains unknown whether Web-based or other conventional recruitment methods (ie, face-to-face or flyer distribution) yield comparable survey responses from similar participants. We conducted a survey to determine whether there was a difference in the sexual and reproductive health survey responses of young Japanese women based on recruitment methods: social media-based and conventional methods. From July 2012 to March 2013 (9 months), we invited women of ages 16-35 years in Kanagawa, Japan, to complete a Web-based questionnaire. They were recruited through either a social media-based (social networking site, SNS, group) or by conventional methods (conventional group). All participants enrolled were required to fill out and submit their responses through a Web-based questionnaire about their sexual and reproductive health for cervical cancer prevention. Of the 243 participants, 52.3% (127/243) were recruited by SNS, whereas 47.7% (116/243) were recruited by conventional methods. We found no differences between recruitment methods in responses to behaviors and attitudes to sexual and reproductive health survey, although more participants from the conventional group (15%, 14/95) chose not to answer the age of first intercourse compared with those from the SNS group (5.2%, 6/116; P=.03). No differences were found between recruitment methods in the responses of young Japanese women to a Web-based sexual and reproductive health survey. ©Yoko Motoki, Etsuko Miyagi, Masataka Taguri, Mikiko Asai-Sato, Takayuki Enomoto, John Dennis Wark, Suzanne Marie Garland. Originally

  3. Effect of different drying methods on the composition of steviol glycosides in Stevia rebaudiana Bertoni leaves

    Science.gov (United States)

    Aranda-González, Irma; Betancur-Ancona, David; Chel-Guerrero, Luis; Moguel-Ordóñez, Yolanda

    2017-01-01

    Drying techniques can modify the composition of certain plant compounds. Therefore, the aim of the study was to assess the effect of different drying methods on steviol glycosides in Stevia rebaudiana Bertoni leaves. Four different drying methods were applied to Stevia rebaudiana Bertoni leaves, which were then subjected to aqueous extraction. Radiation or convection drying was performed in stoves at 60°C, whereas shade or sun drying methods were applied at 29.7°C and 70% of relative humidity. Stevioside, rebaudioside A, rebaudioside B, rebaudioside C, rebaudioside D, dulcoside A, and steviolbioside were quantified by a validated HPLC method. Among steviol glycosides, the content (g 100 g-1 dry basis) of stevioside, rebaudioside A, rebaudioside B, and rebaudioside C varied according to the drying method. The total glycoside content was higher in sun-dried samples, with no significant differences compared to shade or convection drying, whereas radiation drying adversely affected the content of rebaudioside A and rebaudioside C (p <0.01) and was therefore a method lowering total glycoside content. The effect of the different drying methods was also reflected in the proportion of the sweetener profile. Convection drying could be suitable for modern food processing industries while shadow or sun drying may be a low-cost alternative for farmers.

  4. How powerful are summary-based methods for identifying expression-trait associations under different genetic architectures?

    Science.gov (United States)

    Veturi, Yogasudha; Ritchie, Marylyn D

    2018-01-01

    set. Subsequently, we integrated the GWAS summary statistics derived from the testing set with the weights (or eQTLs) derived from the training set to identify expression-trait associations using (a) TWAS-MP (b) TWAS-SMR (c) eQTL-based GWAS, or (d) standalone GWAS. Finally, we examined the power to detect functionally relevant genes using the different approaches under the considered simulation scenarios. In general, we observed great similarities among TWAS-MP methods although the Bayesian methods resulted in improved power in comparison to LASSO and elastic net as the trait architecture grew more complex while training sample sizes and expression heritability remained small. Finally, we observed high power under causality but very low to moderate power under pleiotropy.

  5. Energy stable and high-order-accurate finite difference methods on staggered grids

    Science.gov (United States)

    O'Reilly, Ossian; Lundquist, Tomas; Dunham, Eric M.; Nordström, Jan

    2017-10-01

    For wave propagation over distances of many wavelengths, high-order finite difference methods on staggered grids are widely used due to their excellent dispersion properties. However, the enforcement of boundary conditions in a stable manner and treatment of interface problems with discontinuous coefficients usually pose many challenges. In this work, we construct a provably stable and high-order-accurate finite difference method on staggered grids that can be applied to a broad class of boundary and interface problems. The staggered grid difference operators are in summation-by-parts form and when combined with a weak enforcement of the boundary conditions, lead to an energy stable method on multiblock grids. The general applicability of the method is demonstrated by simulating an explosive acoustic source, generating waves reflecting against a free surface and material discontinuity.

  6. Exact Solutions for Fractional Differential-Difference Equations by an Extended Riccati Sub-ODE Method

    International Nuclear Information System (INIS)

    Feng Qinghua

    2013-01-01

    In this paper, an extended Riccati sub-ODE method is proposed to establish new exact solutions for fractional differential-difference equations in the sense of modified Riemann—Liouville derivative. By a fractional complex transformation, a given fractional differential-difference equation can be turned into another differential-difference equation of integer order. The validity of the method is illustrated by applying it to solve the fractional Hybrid lattice equation and the fractional relativistic Toda lattice system. As a result, some new exact solutions including hyperbolic function solutions, trigonometric function solutions and rational solutions are established. (general)

  7. A functional-analytic method for the study of difference equations

    Directory of Open Access Journals (Sweden)

    Panayiotis D. Siafarikas

    2004-07-01

    Full Text Available We will give the generalization of a recently developed functional-analytic method for studying linear and nonlinear, ordinary and partial, difference equations in the ℓp1 and ℓp2 spaces, p∈ℕ, p≥1. The method will be illustrated by use of two examples concerning a nonlinear ordinary difference equation known as the Putnam equation, and a linear partial difference equation of three variables describing the discrete Newton law of cooling in three dimensions.

  8. The Effect of Two Different Sterilization Methods on The Surface Topography and Microbial Contamination of Different Types of Endodontic Files

    International Nuclear Information System (INIS)

    Yousri, H.R.M.

    2014-01-01

    Sterilization is an integral part of the dental field. Sterilization should be used for instruments, surgical gloves and other items that come in direct contact with the blood stream or normally sterile tissues. Because sterilization is a process, not a single event, all components must be carried out correctly for sterilization to occur. To be effective, sterilization requires time, contact, temperature and with steam sterilization, high pressure. The effectiveness of any method of sterilization is also dependent upon four other factors: The type of microorganism present, the number of microorganisms present, the amount and type of organic material that protects the microorganisms and the number of cracks and crevices on an instrument that might harbor microorganisms. The most commonly used and standard methods of sterilization is the steam under pressure method using the autoclaves. However, it's not free from drawbacks; where it is not suitable for the heat sensitive equipment's such as the plastics, rubber. Also repeated autoclaving can cause pitting and dulling of cutting edges of instruments which might affect their clinical performance. Another alternative method of sterilization is by gamma rays which have been introduced for the sterilization of heat sensitive equipment's. Therefore conducting a study to investigate the effect of repeated sterilization cycles by either steam under pressure or gamma radiation on the surface topography of root canal enlarging instruments was thought to be valuable. The null hypothesis tested is that there is no difference in the effect of repeated sterilization by either steam under pressure or gamma radiation on the surface topography of root canal enlarging instruments

  9. Shear Strength of Remoulding Clay Samples Using Different Methods of Moulding

    Science.gov (United States)

    Norhaliza, W.; Ismail, B.; Azhar, A. T. S.; Nurul, N. J.

    2016-07-01

    Shear strength for clay soil was required to determine the soil stability. Clay was known as a soil with complex natural formations and very difficult to obtain undisturbed samples at the site. The aim of this paper was to determine the unconfined shear strength of remoulded clay on different methods in moulding samples which were proctor compaction, hand operated soil compacter and miniature mould methods. All the samples were remoulded with the same optimum moisture content (OMC) and density that were 18% and 1880 kg/m3 respectively. The unconfined shear strength results of remoulding clay soils for proctor compaction method was 289.56kPa with the strain 4.8%, hand operated method was 261.66kPa with the strain 4.4% and miniature mould method was 247.52kPa with the strain 3.9%. Based on the proctor compaction method, the reduction percentage of unconfined shear strength of remoulded clay soil of hand operated method was 9.66%, and for miniature mould method was 14.52%. Thus, because there was no significant difference of reduction percentage of unconfined shear strength between three different methods, so it can be concluded that remoulding clay by hand operated method and miniature mould method were accepted and suggested to perform remoulding clay samples by other future researcher. However for comparison, the hand operated method was more suitable to form remoulded clay sample in term of easiness, saving time and less energy for unconfined shear strength determination purposes.

  10. The comparison between the effectiveness of six different tooth brushing methods on removing dental bacterial plaque

    Directory of Open Access Journals (Sweden)

    Saghazadeh M.

    2004-07-01

    Full Text Available Statement of Problem: There are different tooth brushing methods for removing dental plaque from tooth surfaces. The effectiveness of these methods, and the time needed for instruction, learning and using seem to be different. Also, it is possible that the effectiveness of each method reduces with time, based on its difficulty level and the reduction of the patient s attention in following the given instructions. Purpose: The aim of this research was to compare the effectiveness of six different accepted tooth brushing methods on total and specific teeth, as well as on special tooth surfaces. The research also compared the time needed for instruction, learning and using the methods. Materials and Methods: The study was designed as a single blind randomised controlled trial protocol to compare the six accepted tooth brushing methods: Roll, Bass, Charters (C, Modified Stillman (MS, and Modified Bass in two ways (MB1-MB2. 15 volunteers were selected from the basic science level dental students at Tehran University of Medical Sciences. All the six methods were instructed to each volunteer, using a randomly selected sequence. Each participant should, therefore, pass six consequent courses, by the same sequences as follow: 1st Visit: After polishing the teeth, the participant was asked to abstain any kind of tooth cleaning. - 2nd visit (48-72 hours later: O Leary Plaque Index (PI was recorded and then the randomised selected method was instructed. Then, the participant brushed his/her teeth and PI was registered again. The time needed for instruction and using the method was registered too. The participant was then asked to use this newly learned tooth brushing method twice a day for 7±1 days. - 3rd visit (7±1 days later: PI was recorded. The teeth were polished. The participant was asked to abstain any kind of tooth cleaning for 48-72 hours, as washout period of the previous method and preparation period for the next method (2nd visit of the next

  11. [Do different interpretative methods used for evaluation of checkerboard synergy test affect the results?].

    Science.gov (United States)

    Ozseven, Ayşe Gül; Sesli Çetin, Emel; Ozseven, Levent

    2012-07-01

    In recent years, owing to the presence of multi-drug resistant nosocomial bacteria, combination therapies are more frequently applied. Thus there is more need to investigate the in vitro activity of drug combinations against multi-drug resistant bacteria. Checkerboard synergy testing is among the most widely used standard technique to determine the activity of antibiotic combinations. It is based on microdilution susceptibility testing of antibiotic combinations. Although this test has a standardised procedure, there are many different methods for interpreting the results. In many previous studies carried out with multi-drug resistant bacteria, different rates of synergy have been reported with various antibiotic combinations using checkerboard technique. These differences might be attributed to the different features of the strains. However, different synergy rates detected by checkerboard method have also been reported in other studies using the same drug combinations and same types of bacteria. It was thought that these differences in synergy rates might be due to the different methods of interpretation of synergy test results. In recent years, multi-drug resistant Acinetobacter baumannii has been the most commonly encountered nosocomial pathogen especially in intensive-care units. For this reason, multidrug resistant A.baumannii has been the subject of a considerable amount of research about antimicrobial combinations. In the present study, the in vitro activities of frequently preferred combinations in A.baumannii infections like imipenem plus ampicillin/sulbactam, and meropenem plus ampicillin/sulbactam were tested by checkerboard synergy method against 34 multi-drug resistant A.baumannii isolates. Minimum inhibitory concentration (MIC) values for imipenem, meropenem and ampicillin/sulbactam were determined by the broth microdilution method. Subsequently the activity of two different combinations were tested in the dilution range of 4 x MIC and 0.03 x MIC in

  12. Determination of fossil carbon content in Swedish waste fuel by four different methods.

    Science.gov (United States)

    Jones, Frida C; Blomqvist, Evalena W; Bisaillon, Mattias; Lindberg, Daniel K; Hupa, Mikko

    2013-10-01

    This study aimed to determine the content of fossil carbon in waste combusted in Sweden by using four different methods at seven geographically spread combustion plants. In total, the measurement campaign included 42 solid samples, 21 flue gas samples, 3 sorting analyses and 2 investigations using the balance method. The fossil carbon content in the solid samples and in the flue gas samples was determined using (14)C-analysis. From the analyses it was concluded that about a third of the carbon in mixed Swedish waste (municipal solid waste and industrial waste collected at Swedish industry sites) is fossil. The two other methods (the balance method and calculations from sorting analyses), based on assumptions and calculations, gave similar results in the plants in which they were used. Furthermore, the results indicate that the difference between samples containing as much as 80% industrial waste and samples consisting of solely municipal solid waste was not as large as expected. Besides investigating the fossil content of the waste, the project was also established to investigate the usability of various methods. However, it is difficult to directly compare the different methods used in this project because besides the estimation of emitted fossil carbon the methods provide other information, which is valuable to the plant owner. Therefore, the choice of method can also be controlled by factors other than direct determination of the fossil fuel emissions when considering implementation in the combustion plants.

  13. Numerical approximations of nonlinear fractional differential difference equations by using modified He-Laplace method

    Directory of Open Access Journals (Sweden)

    J. Prakash

    2016-03-01

    Full Text Available In this paper, a numerical algorithm based on a modified He-Laplace method (MHLM is proposed to solve space and time nonlinear fractional differential-difference equations (NFDDEs arising in physical phenomena such as wave phenomena in fluids, coupled nonlinear optical waveguides and nanotechnology fields. The modified He-Laplace method is a combined form of the fractional homotopy perturbation method and Laplace transforms method. The nonlinear terms can be easily decomposed by the use of He’s polynomials. This algorithm has been tested against time-fractional differential-difference equations such as the modified Lotka Volterra and discrete (modified KdV equations. The proposed scheme grants the solution in the form of a rapidly convergent series. Three examples have been employed to illustrate the preciseness and effectiveness of the proposed method. The achieved results expose that the MHLM is very accurate, efficient, simple and can be applied to other nonlinear FDDEs.

  14. A Comparative Analysis of Pitch Detection Methods Under the Influence of Different Noise Conditions.

    Science.gov (United States)

    Sukhostat, Lyudmila; Imamverdiyev, Yadigar

    2015-07-01

    Pitch is one of the most important components in various speech processing systems. The aim of this study was to evaluate different pitch detection methods in terms of various noise conditions. Prospective study. For evaluation of pitch detection algorithms, time-domain, frequency-domain, and hybrid methods were considered by using Keele and CSTR speech databases. Each of them has its own advantages and disadvantages. Experiments have shown that BaNa method achieves the highest pitch detection accuracy. The development of methods for pitch detection, which are robust to additive noise at different signal-to-noise ratio, is an important field of research with many opportunities for enhancement the modern methods. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  15. Comparative study of different application methods of 14C-Fosthiazate in tomato plants

    International Nuclear Information System (INIS)

    Nitesh Sharma; Surendra Kumar

    2011-01-01

    A comparative study of different application methods of nematicide 14 C-Fosthiazate was done for the uptake in tomato plants in two varieties Pusa Ruby and Pusa Early Dwarf. The application methods used for the research purpose are seed treatment, soil supplication and drip application in presence and absence of surfactant (Tween-80).It as found that percent absorption was the highest in the drip irrigation method in presence of surfactant. The percent uptake of 14 C-Fosthiazate in two varieties of tomato plants was found to be higher in Pusa Early Dwarf in all the treatment methods. (author)

  16. Solving the Schroedinger equation using the finite difference time domain method

    International Nuclear Information System (INIS)

    Sudiarta, I Wayan; Geldart, D J Wallace

    2007-01-01

    In this paper, we solve the Schroedinger equation using the finite difference time domain (FDTD) method to determine energies and eigenfunctions. In order to apply the FDTD method, the Schroedinger equation is first transformed into a diffusion equation by the imaginary time transformation. The resulting time-domain diffusion equation is then solved numerically by the FDTD method. The theory and an algorithm are provided for the procedure. Numerical results are given for illustrative examples in one, two and three dimensions. It is shown that the FDTD method accurately determines eigenfunctions and energies of these systems

  17. Preparation of SnO2 Nanoparticles by Two Different Wet Chemistry Methods

    International Nuclear Information System (INIS)

    Ridha, N.J.; Akrajas Ali Umar; Muhammad Yahya; Muhammad Mat Salleh; Mohamad Hafizuddin Jumali

    2011-01-01

    The objective of this project is to prepare SnO 2 nanoparticles by two different wet chemistry methods namely sol gel and direct growth methods. The XRD results indicated that both samples are single phase SnO 2 . The FE-SEM micrographs displayed that SnO 2 nanoparticles prepared in first method exhibited a round shape with particle size around 15 nm while the second method produced SnO 2 nano rod with length and width of 570 nm and 55 nm respectively. Energy gap values for SnO 2 nanospheres and nano rods were 4.38 and 4.34 eV respectively. (author)

  18. MODELING AND SIMULATION OF TRAFFIC FLOWS ON INCLINED ROAD DURING EVACUATION PROCESS OF THE VOLCANO DISASTER WITH FINITE DIFFERENCE METHOD

    Directory of Open Access Journals (Sweden)

    Richasanty Septima S

    2017-03-01

    Full Text Available The research in this thesis was done to examine the model of traffic flow of volcanic disaster evacuation path for uphill and downhill roads. The assessment was focused on the area of disaster evacuation path from the Pante Raya Bener Meriah intersection to Takengon. This model is assessed for two different types of time when which a disaster occurs; the disaster occurred at night and the disaster occurred during the day, especially during peak hours (working hours. The model was developed with attention to the exixtence of inflow and outflow along the evacuation route. Furthermore, the model obtained is solved numerically by using finite difference method. The chosen approach of this method is upwind scheme with time and space steps using forward difference and backward difference. The solution of this model in the form of simulated vehicle density along evacuation pathways. The research conducted is in the form of a model of traffic flow on evacuation paths and restricted to the inflow and outflow without alternative path as well as the conditions of the road which are uphill and downhill, showed a high density of vehicles either at night or during the day. Uphill road conditions resulted in decreased vehicle speed and vehicle density will increase, while downhill road conditions resulted in increased vehicle speed and vehicle density will decrease, meaning that the road conditions which are uphill and downhill will greatly affect the process of evacuation. Degree vehicles of evacuation efficiency occuring at night without an alternative pathway produces a high efficiency so that it can be interpreted that the evacuation process in the evening was successful and runs better than the evacuation process during the day, and this is caused by the existence of vehicles on the road evacuation process started thus affecting the efficiency levels.

  19. Enhancing the laccase production and laccase gene expression in the white-rot fungus Trametes velutina 5930 with great potential for biotechnological applications by different metal ions and aromatic compounds.

    Directory of Open Access Journals (Sweden)

    Yang Yang

    Full Text Available Laccase is useful for various biotechnological and industrial applications. The white-rot fungus Trametes velutina 5930 and its laccase, isolated from the Shennongjia Nature Reserve in China by our laboratory, has great potential for practical application in environmental biotechnology. However, the original level of laccase produced by Trametes velutina 5930 was relatively low in the absence of any inducer. Therefore, in order to enhance the laccase production by Trametes velutina 5930 and make better use of this fungus in the field of environmental biotechnology, the regulation of laccase production and laccase gene expression in Trametes velutina 5930 were investigated in this study. Different metal ions such as Cu(2+ and Fe(2+ could stimulate the laccase synthesis and laccase gene transcription in Trametes velutina 5930. Some aromatic compounds structurally related to lignin, such as tannic acid, syringic acid, cinnamic acid, gallic acid and guaiacol, could also enhance the level of laccase activity and laccase gene transcription. We also found that there existed a positive synergistic effect of aromatic compound and metal ion on the laccase production and laccase gene transcription in Trametes velutina 5930. Taken together, our study may contribute to the improvement of laccase productivity by Trametes velutina 5930.

  20. Enhancing the laccase production and laccase gene expression in the white-rot fungus Trametes velutina 5930 with great potential for biotechnological applications by different metal ions and aromatic compounds.

    Science.gov (United States)

    Yang, Yang; Wei, Fuxiang; Zhuo, Rui; Fan, Fangfang; Liu, Huahua; Zhang, Chen; Ma, Li; Jiang, Mulan; Zhang, Xiaoyu

    2013-01-01

    Laccase is useful for various biotechnological and industrial applications. The white-rot fungus Trametes velutina 5930 and its laccase, isolated from the Shennongjia Nature Reserve in China by our laboratory, has great potential for practical application in environmental biotechnology. However, the original level of laccase produced by Trametes velutina 5930 was relatively low in the absence of any inducer. Therefore, in order to enhance the laccase production by Trametes velutina 5930 and make better use of this fungus in the field of environmental biotechnology, the regulation of laccase production and laccase gene expression in Trametes velutina 5930 were investigated in this study. Different metal ions such as Cu(2+) and Fe(2+) could stimulate the laccase synthesis and laccase gene transcription in Trametes velutina 5930. Some aromatic compounds structurally related to lignin, such as tannic acid, syringic acid, cinnamic acid, gallic acid and guaiacol, could also enhance the level of laccase activity and laccase gene transcription. We also found that there existed a positive synergistic effect of aromatic compound and metal ion on the laccase production and laccase gene transcription in Trametes velutina 5930. Taken together, our study may contribute to the improvement of laccase productivity by Trametes velutina 5930.

  1. A probabilistic method for testing and estimating selection differences between populations.

    Science.gov (United States)

    He, Yungang; Wang, Minxian; Huang, Xin; Li, Ran; Xu, Hongyang; Xu, Shuhua; Jin, Li

    2015-12-01

    Human populations around the world encounter various environmental challenges and, consequently, develop genetic adaptations to different selection forces. Identifying the differences in natural selection between populations is critical for understanding the roles of specific genetic variants in evolutionary adaptation. Although numerous methods have been developed to detect genetic loci under recent directional selection, a probabilistic solution for testing and quantifying selection differences between populations is lacking. Here we report the development of a probabilistic method for testing and estimating selection differences between populations. By use of a probabilistic model of genetic drift and selection, we showed that logarithm odds ratios of allele frequencies provide estimates of the differences in selection coefficients between populations. The estimates approximate a normal distribution, and variance can be estimated using genome-wide variants. This allows us to quantify differences in selection coefficients and to determine the confidence intervals of the estimate. Our work also revealed the link between genetic association testing and hypothesis testing of selection differences. It therefore supplies a solution for hypothesis testing of selection differences. This method was applied to a genome-wide data analysis of Han and Tibetan populations. The results confirmed that both the EPAS1 and EGLN1 genes are under statistically different selection in Han and Tibetan populations. We further estimated differences in the selection coefficients for genetic variants involved in melanin formation and determined their confidence intervals between continental population groups. Application of the method to empirical data demonstrated the outstanding capability of this novel approach for testing and quantifying differences in natural selection. © 2015 He et al.; Published by Cold Spring Harbor Laboratory Press.

  2. Comparison of different methods for the determination of dynamic characteristics of low velocity anemometers

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Popiolek, Z.

    2004-01-01

    Three methods for determining the dynamic characteristics of low velocity thermal anemometers were compared. They were: step-up velocity change and step-down velocity change methods and a method based on sinusoidal type velocity fluctuations. Two low velocity thermal anemometers with omnidirectio......Three methods for determining the dynamic characteristics of low velocity thermal anemometers were compared. They were: step-up velocity change and step-down velocity change methods and a method based on sinusoidal type velocity fluctuations. Two low velocity thermal anemometers...... with omnidirectional velocity sensors were tested. The results identify differences in frequency response of low velocity anemometers determined by the three methods. The time constant and the response time determined by the step-up velocity change method and the step-down velocity change method may be substantially...... different and insufficient for describing the frequency response of all low velocity thermal anemometers. Therefore the upper frequency, determined in tests with sinusoidal velocity fluctuations, is recommended to be used in indoor climate standards as a single parameter describing the dynamic...

  3. Comparison of Chemical Extraction Methods for Determination of Soil Potassium in Different Soil Types

    Science.gov (United States)

    Zebec, V.; Rastija, D.; Lončarić, Z.; Bensa, A.; Popović, B.; Ivezić, V.

    2017-12-01

    Determining potassium supply of soil plays an important role in intensive crop production, since it is the basis for balancing nutrients and issuing fertilizer recommendations for achieving high and stable yields within economic feasibility. The aim of this study was to compare the different extraction methods of soil potassium from arable horizon of different types of soils with ammonium lactate method (KAL), which is frequently used as analytical method for determining the accessibility of nutrients and it is a common method used for issuing fertilizer recommendations in many Europe countries. In addition to the ammonium lactate method (KAL, pH 3.75), potassium was extracted with ammonium acetate (KAA, pH 7), ammonium acetate ethylenediaminetetraacetic acid (KAAEDTA, pH 4.6), Bray (KBRAY, pH 2.6) and with barium chloride (K_{BaCl_2 }, pH 8.1). The analyzed soils were extremely heterogeneous with a wide range of determined values. Soil pH reaction ( {pH_{H_2 O} } ) ranged from 4.77 to 8.75, organic matter content ranged from 1.87 to 4.94% and clay content from 8.03 to 37.07%. In relation to KAL method as the standard method, K_{BaCl_2 } method extracts 12.9% more on average of soil potassium, while in relation to standard method, on average KAA extracts 5.3%, KAAEDTA 10.3%, and KBRAY 27.5% less of potassium. Comparison of analyzed extraction methods of potassium from the soil is of high precision, and most reliable comparison was KAL method with KAAEDTA, followed by a: KAA, K_{BaCl_2 } and KBRAY method. Extremely significant statistical correlation between different extractive methods for determining potassium in the soil indicates that any of the methods can be used to accurately predict the concentration of potassium in the soil, and that carried out research can be used to create prediction model for concentration of potassium based on different methods of extraction.

  4. A new approach combining different MRI methods to provide detailed view on swelling dynamics of xanthan tablets influencing drug release at different pH and ionic strength.

    Science.gov (United States)

    Mikac, Ursa; Sepe, Ana; Kristl, Julijana; Baumgartner, Sasa

    2010-08-03

    The key element in drug release from hydrophilic matrix tablets is the gel layer that regulates the penetration of water and controls drug dissolution and diffusion. We have selected magnetic resonance imaging (MRI) as the method of choice for visualizing the dynamic processes occurring during the swelling of xanthan tablets in a variety of media. The aims were (i) to develop a new method using MRI for accurate determination of penetration, swelling and erosion fronts, (ii) to investigate the effects of pH and ionic strength on swelling, and (iii) to study the influence of structural changes in xanthan gel on drug release. Two dimensional (2D) MRI and one dimensional single point imaging (SPI) of swollen xanthan tablets were recorded, together with T(2) mapping. The border between dry and hydrated glassy xanthan-the penetration front-was determined from 1D SPI signal intensity profiles. The erosion front was obtained from signal intensity profiles of 2D MR images. The swelling front, where xanthan is transformed from a glassy to a rubbery state (gel formation), was determined from T(2) profiles. Further, the new combination of MRI methods for swelling front determination enables to explain the appearance of the unusual "bright front" observed on 2D MR images in tablets swollen in HCl pH 1.2 media, which represents the position of swelling front. All six media studied, differing in pH and ionic strength, penetrate through the whole tablet in 4h+/-0.3h, but formation of the gel layer is significantly delayed. Unexpectedly, the position of the swelling front was the same, independently of the different xanthan gel structures formed under different conditions of pH and ionic strength. The position of the erosion front, on the other hand, is strongly dependent on pH and ionic strength, as reflected in different thicknesses of the gel layers. The latter are seen to be the consequence of the different hydrodynamic radii of the xanthan molecules, which affect the drug

  5. A simple and efficient method for isolating small RNAs from different plant species

    Directory of Open Access Journals (Sweden)

    de Folter Stefan

    2011-02-01

    Full Text Available Abstract Background Small RNAs emerged over the last decade as key regulators in diverse biological processes in eukaryotic organisms. To identify and study small RNAs, good and efficient protocols are necessary to isolate them, which sometimes may be challenging due to the composition of specific tissues of certain plant species. Here we describe a simple and efficient method to isolate small RNAs from different plant species. Results We developed a simple and efficient method to isolate small RNAs from different plant species by first comparing different total RNA extraction protocols, followed by streamlining the best one, finally resulting in a small RNA extraction method that has no need of first total RNA extraction and is not based on the commercially available TRIzol® Reagent or columns. This small RNA extraction method not only works well for plant tissues with high polysaccharide content, like cactus, agave, banana, and tomato, but also for plant species like Arabidopsis or tobacco. Furthermore, the obtained small RNA samples were successfully used in northern blot assays. Conclusion Here we provide a simple and efficient method to isolate small RNAs from different plant species, such as cactus, agave, banana, tomato, Arabidopsis, and tobacco, and the small RNAs from this simplified and low cost method is suitable for downstream handling like northern blot assays.

  6. Acceleration of Linear Finite-Difference Poisson-Boltzmann Methods on Graphics Processing Units.

    Science.gov (United States)

    Qi, Ruxi; Botello-Smith, Wesley M; Luo, Ray

    2017-07-11

    Electrostatic interactions play crucial roles in biophysical processes such as protein folding and molecular recognition. Poisson-Boltzmann equation (PBE)-based models have emerged as widely used in modeling these important processes. Though great efforts have been put into developing efficient PBE numerical models, challenges still remain due to the high dimensionality of typical biomolecular systems. In this study, we implemented and analyzed commonly used linear PBE solvers for the ever-improving graphics processing units (GPU) for biomolecular simulations, including both standard and preconditioned conjugate gradient (CG) solvers with several alternative preconditioners. Our implementation utilizes the standard Nvidia CUDA libraries cuSPARSE, cuBLAS, and CUSP. Extensive tests show that good numerical accuracy can be achieved given that the single precision is often used for numerical applications on GPU platforms. The optimal GPU performance was observed with the Jacobi-preconditioned CG solver, with a significant speedup over standard CG solver on CPU in our diversified test cases. Our analysis further shows that different matrix storage formats also considerably affect the efficiency of different linear PBE solvers on GPU, with the diagonal format best suited for our standard finite-difference linear systems. Further efficiency may be possible with matrix-free operations and integrated grid stencil setup specifically tailored for the banded matrices in PBE-specific linear systems.

  7. Constructing a Measurement Method of Differences in Group Preferences Based on Relative Entropy

    Directory of Open Access Journals (Sweden)

    Shiyu Zhang

    2017-01-01

    Full Text Available In the research and data analysis of the differences involved in group preferences, conventional statistical methods cannot reflect the integrity and preferences of human minds; in particular, it is difficult to exclude humans’ irrational factors. This paper introduces a preference amount model based on relative entropy theory. A related expansion is made based on the characteristics of the questionnaire data, and we also construct the parameters to measure differences in the data distribution of different groups on the whole. In this paper, this parameter is called the center distance, and it effectively reflects the preferences of human minds. Using the survey data of securities market participants as an example, this paper analyzes differences in market participants’ attitudes toward the effectiveness of securities regulation. Based on this method, differences between groups that were overlooked by analysis of variance are found, and certain aspects obscured by general data characteristics are also found.

  8. Evaluating a complex system-wide intervention using the difference in differences method: the Delivering Choice Programme.

    Science.gov (United States)

    Round, Jeff; Drake, Robyn; Kendall, Edward; Addicott, Rachael; Agelopoulos, Nicky; Jones, Louise

    2015-03-01

    We report the use of difference in differences (DiD) methodology to evaluate a complex, system-wide healthcare intervention. We use the worked example of evaluating the Marie Curie Delivering Choice Programme (DCP) for advanced illness in a large urban healthcare economy. DiD was selected because a randomised controlled trial was not feasible. The method allows for before and after comparison of changes that occur in an intervention site with a matched control site. This enables analysts to control for the effect of the intervention in the absence of a local control. Any policy, seasonal or other confounding effects over the test period are assumed to have occurred in a balanced way at both sites. Data were obtained from primary care trusts. Outcomes were place of death, inpatient admissions, length of stay and costs. Small changes were identified between pre- and post-DCP outputs in the intervention site. The proportion of home deaths and median cost increased slightly, while the number of admissions per patient and the average length of stay per admission decreased slightly. None of these changes was statistically significant. Effects estimates were limited by small numbers accessing new services and selection bias in sample population and comparator site. In evaluating the effect of a complex healthcare intervention, the choice of analysis method and output measures is crucial. Alternatives to randomised controlled trials may be required for evaluating large scale complex interventions and the DiD approach is suitable, subject to careful selection of measured outputs and control population. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. A comparative study of different methods for calculating electronic transition rates

    Science.gov (United States)

    Kananenka, Alexei A.; Sun, Xiang; Schubert, Alexander; Dunietz, Barry D.; Geva, Eitan

    2018-03-01

    We present a comprehensive comparison of the following mixed quantum-classical methods for calculating electronic transition rates: (1) nonequilibrium Fermi's golden rule, (2) mixed quantum-classical Liouville method, (3) mean-field (Ehrenfest) mixed quantum-classical method, and (4) fewest switches surface-hopping method (in diabatic and adiabatic representations). The comparison is performed on the Garg-Onuchic-Ambegaokar benchmark charge-transfer model, over a broad range of temperatures and electronic coupling strengths, with different nonequilibrium initial states, in the normal and inverted regimes. Under weak to moderate electronic coupling, the nonequilibrium Fermi's golden rule rates are found to be in good agreement with the rates obtained via the mixed quantum-classical Liouville method that coincides with the fully quantum-mechanically exact results for the model system under study. Our results suggest that the nonequilibrium Fermi's golden rule can serve as an inexpensive yet accurate alternative to Ehrenfest and the fewest switches surface-hopping methods.

  10. The Ability of Different Imputation Methods to Preserve the Significant Genes and Pathways in Cancer

    Directory of Open Access Journals (Sweden)

    Rosa Aghdam

    2017-12-01

    Full Text Available Deciphering important genes and pathways from incomplete gene expression data could facilitate a better understanding of cancer. Different imputation methods can be applied to estimate the missing values. In our study, we evaluated various imputation methods for their performance in preserving significant genes and pathways. In the first step, 5% genes are considered in random for two types of ignorable and non-ignorable missingness mechanisms with various missing rates. Next, 10 well-known imputation methods were applied to the complete datasets. The significance analysis of microarrays (SAM method was applied to detect the significant genes in rectal and lung cancers to showcase the utility of imputation approaches in preserving significant genes. To determine the impact of different imputation methods on the identification of important genes, the chi-squared test was used to compare the proportions of overlaps between significant genes detected from original data and those detected from the imputed datasets. Additionally, the significant genes are tested for their enrichment in important pathways, using the ConsensusPathDB. Our results showed that almost all the significant genes and pathways of the original dataset can be detected in all imputed datasets, indicating that there is no significant difference in the performance of various imputation methods tested. The source code and selected datasets are available on http://profiles.bs.ipm.ir/softwares/imputation_methods/.

  11. The Ability of Different Imputation Methods to Preserve the Significant Genes and Pathways in Cancer.

    Science.gov (United States)

    Aghdam, Rosa; Baghfalaki, Taban; Khosravi, Pegah; Saberi Ansari, Elnaz

    2017-12-01

    Deciphering important genes and pathways from incomplete gene expression data could facilitate a better understanding of cancer. Different imputation methods can be applied to estimate the missing values. In our study, we evaluated various imputation methods for their performance in preserving significant genes and pathways. In the first step, 5% genes are considered in random for two types of ignorable and non-ignorable missingness mechanisms with various missing rates. Next, 10 well-known imputation methods were applied to the complete datasets. The significance analysis of microarrays (SAM) method was applied to detect the significant genes in rectal and lung cancers to showcase the utility of imputation approaches in preserving significant genes. To determine the impact of different imputation methods on the identification of important genes, the chi-squared test was used to compare the proportions of overlaps between significant genes detected from original data and those detected from the imputed datasets. Additionally, the significant genes are tested for their enrichment in important pathways, using the ConsensusPathDB. Our results showed that almost all the significant genes and pathways of the original dataset can be detected in all imputed datasets, indicating that there is no significant difference in the performance of various imputation methods tested. The source code and selected datasets are available on http://profiles.bs.ipm.ir/softwares/imputation_methods/. Copyright © 2017. Production and hosting by Elsevier B.V.

  12. Effectiveness of different tutorial recitation teaching methods and its implications for TA training

    Science.gov (United States)

    Endorf, Robert

    2008-04-01

    We present results from a comparative study of student understanding for students who attended recitation classes that used different teaching methods. The purpose of the study was to evaluate which teaching methods would be the most effective for recitation classes associated with large lectures in introductory physics courses. Student volunteers from our introductory calculus-based physics course at the University of Cincinnati attended a special recitation class that was taught using one of four different teaching methods. A total of 272 students were divided into approximately equal groups for each method. Students in each class were taught the same topic, ``Changes in Energy and Momentum,'' from ``Tutorials in Introductory Physics'' by Lillian McDermott, Peter Shaffer and the Physics Education Group at the University of Washington. The different teaching methods varied in the amount of student and teacher engagement. Student understanding was evaluated through pretests and posttests. Our results demonstrate the importance of the instructor's role in teaching recitation classes. The most effective teaching method was for students working in cooperative learning groups with the instructors questioning the groups using Socratic dialogue. In addition, we investigated student preferences of modes of instruction through an open-ended survey. Our results provide guidance and evidence for the teaching methods which should be emphasized in training course instructors.

  13. Influence of The Difference of Perception and Kinesthetic Exercise Methods Against Precision Hit The Ball Softball

    Directory of Open Access Journals (Sweden)

    Fajar Rokhayah

    2017-06-01

    Full Text Available The purpose of this study was to determine: 1 The difference between the effects of training methods and the gradual striking distance striking distance remains as to the accuracy of hitting the ball Softball. 2 The difference in accuracy influence Softball hitting the ball between the athletes who have a good kinesthetic perception, kinesthetic perception was, and kinesthetic perception less. 3 The effect of interaction between training methods with kinesthetic perception as to the accuracy of hitting the ball Softball. This study used an experimental method with 2x3 factorial design. The results of this study were: 1 There is a significant difference between the gradual striking distance training methods and training methods remain striking distance of the ability to hit a softball with the result of the acquisition value p-value = 0.027 smaller than 0.05. 2 There is a significant difference between athletes who have a kinesthetic perception of good, moderate, lacking the ability to hit a softball with the result of the acquisition value p-value = 0.000, which is smaller than 0.05. 3 There is an interaction between striking distance training methods and kinesthetic perception of the ability to hit a softball with the result of the acquisition value p-value = 0.000, which is smaller than 0.05 The conclusion of this study were: 1 Gradually striking distance training methods have a better effect than the fixed striking distance training methods. 2 Athletes who have less kinesthetic perception has better results than the athletes who have good kinesthetic perception and being. 3 There is an interaction between striking distance training methods and kinesthetic perception of the ability to hit a softball.

  14. Preparation of microcapsules containing different contents of different kinds of oils by a segregative coacervation method and their characterization

    Directory of Open Access Journals (Sweden)

    LIDIJA B. PETROVIĆ

    2010-05-01

    Full Text Available Microencapsulation of different oils was performed using a segregative coacervation method. In order to microencapsulate, 20 % oil-in-water (O/W emulsions were prepared in a continuous phase consisting of a 1 % mixture of hydroxypropylmethylcellulose (HPMC/sodium carboxymethylcellulose (NaCMC mass ratio (0.7/0.3 and various concentrations (0, 0.35 and 1 % of the anionic surfactant sodium dodecylsulfate (SDS. Various interactions between the components occur in the continuous phase of emulsions, which influence the structure and properties of the adsorption layer around the oil droplets. The formed HPMC/SDS complexes in the presence of NaCMC molecules undergo segregative phase separation and form a coacervate which adsorbs onto the oil droplets, forming the wall of the microcapsules. Sunflower oil, pumpkin seed oil and a mixture of sunflower and linseed oil were used as the core material. Microcapsules in the solid form were obtained by spray drying the emulsions. The stability of the emulsions, the particle size and particle size distribution of the emulsions and suspensions of microcapsules and the oil content of the microcapsules were determined. The influence of the oil kind on the properties of the microcapsules was also investigated. It was found that at 0.35 % SDS, a coacervate layer around the oil droplets forms a stabile, compact microcapsules wall, which prevents oil extraction. The kind of oil influences the properties of the emulsions and microcapsules, which is important in the selection of oils for microencapsulation by this method.

  15. Measuring DHEA-S in saliva: time of day differences and positive correlations between two different types of collection methods

    Directory of Open Access Journals (Sweden)

    Klein Laura C

    2010-07-01

    Full Text Available Abstract Background The anabolic steroid, dehydroepiandosterone sulfate (DHEA-S, is secreted from the adrenal cortex. It plays a significant role in the body as a precursor to sex steroids as well as a lesser known role in the hypothalamic pituitary adrenal axis (HPA response to stress. DHEA-S can be measured reliably in saliva, making saliva collection a valuable tool for health research because it minimizes the need for invasive sampling procedures (e.g., blood draws. Typical saliva collection methods include the use of plain cotton swab collection devices (e.g., Salivette® or passive drool. There has been some speculation that the plain saliva cotton collection device may interfere with determination of DHEA-S by enzyme immunoassay (EIA bringing this saliva collection method into question. Because of the increasing popularity of salivary biomarker research, we sought to determine whether the cotton swab interferes with DHEA-S determination through EIA techniques. Findings Fifty-six healthy young adult men and women aged 18-30 years came to the lab in the morning (0800 hrs; 14 men, 14 women or late afternoon (1600 hrs; 14 men, 14 women and provided saliva samples via cotton Salivette and passive drool. Passive drool collection was taken first to minimize particle cross contamination from the cotton swab. Samples were assayed for DHEA-S in duplicate using a commercially available kit (DSL, Inc., Webster, TX. DHEA-S levels collected via Salivette and passive drool were positively correlated (r = + 0.83, p Conclusions Results suggest that DHEA-S can be measured accurately using passive drool or cotton Salivette collection methods. Results also suggest that DHEA-S levels change across the day and that future studies need to take this time of day difference into account when measuring DHEA-S.

  16. Review: The Great Gatsby

    Directory of Open Access Journals (Sweden)

    Antonia de Jesus Sales

    2016-08-01

    Full Text Available A presente resenha busca discutir a tradução de The Great Gatsby para o contexto brasileiro. Diversas traduções foram feitas, em diversas épocas e com repercussão positiva no contexto brasileiro. Para o presente estudo, foi observada a tradução de Vanessa Bárbara, de 2011. Nesse sentido, o aspecto biográficos do autor e a forma como se apresentam os personagens na obra são fatores de cotejamento na obra original e na tradução brasileira. Francis Scott Key Fitzgerald (1896 – 1940 é famoso por ter em suas obras traços biográficos, algo que certamente influencia o leitor que adentra a sua obra. Quanto à recepção de O Grande Gatsby no contexto brasileiro, há que se considerar que O Grande Gatsby teve diversas traduções no Brasil. Depois dessa tradução de Vanessa Bárbara, em 2011, outras três vieram em 2013, juntamente com o filme. Há que considerar os aspectos comerciais embutidos nessas traduções e que muito corroboram para o resultado final. Prova disso são as capas, que são sempre diferenciadas em cada edição lançada. O tradutor nem sempre pode opinar sobre questões como estas. A tradução, a meu ver, é uma obra de qualidade, visto que a tradutora buscou ser fiel, sem dificultar a interpretação da obra para o leitor.

  17. Review: The Great Gatsby

    Directory of Open Access Journals (Sweden)

    Antonia de Jesus Sales

    2016-05-01

    Full Text Available A presente resenha busca discutir a tradução de The Great Gatsby para o contexto brasileiro. Diversas traduções foram feitas, em diversas épocas e com repercussão positiva no contexto brasileiro. Para o presente estudo, foi observada a tradução de Vanessa Bárbara, de 2011. Nesse sentido, o aspecto biográficos do autor e a forma como se apresentam os personagens na obra são fatores de cotejamento na obra original e na tradução brasileira. Francis Scott Key Fitzgerald (1896 – 1940 é famoso por ter em suas obras traços biográficos, algo que certamente influencia o leitor que adentra a sua obra. Quanto à recepção de O Grande Gatsby no contexto brasileiro, há que se considerar que O Grande Gatsby teve diversas traduções no Brasil. Depois dessa tradução de Vanessa Bárbara, em 2011, outras três vieram em 2013, juntamente com o filme. Há que considerar os aspectos comerciais embutidos nessas traduções e que muito corroboram para o resultado final. Prova disso são as capas, que são sempre diferenciadas em cada edição lançada. O tradutor nem sempre pode opinar sobre questões como estas. A tradução, a meu ver, é uma obra de qualidade, visto que a tradutora buscou ser fiel, sem dificultar a interpretação da obra para o leitor.

  18. Comparison of the surface wave method and the indentation method for measuring the elasticity of gelatin phantoms of different concentrations.

    Science.gov (United States)

    Zhang, Xiaoming; Qiang, Bo; Greenleaf, James

    2011-02-01

    The speed of the surface Rayleigh wave, which is related to the viscoelastic properties of the medium, can be measured by noninvasive and noncontact methods. This technique has been applied in biomedical applications such as detecting skin diseases. Static spherical indentation, which quantifies material elasticity through the relationship between loading force and displacement, has been applied in various areas including a number of biomedical applications. This paper compares the results obtained from these two methods on five gelatin phantoms of different concentrations (5%, 7.5%, 10%, 12.5% and 15%). The concentrations are chosen because the elasticity of such gelatin phantoms is close to that of tissue types such as skin. The results show that both the surface wave method and the static spherical indentation method produce the same values for shear elasticity. For example, the shear elasticities measured by the surface wave method are 1.51, 2.75, 5.34, 6.90 and 8.40kPa on the five phantoms, respectively. In addition, by studying the dispersion curve of the surface wave speed, shear viscosity can be extracted. The measured shear viscosities are 0.00, 0.00, 0.13, 0.39 and 1.22Pa.s on the five phantoms, respectively. The results also show that the shear elasticity of the gelatin phantoms increases linearly with their prepared concentrations. The linear regressions between concentration and shear elasticity have R(2) values larger than 0.98 for both methods. Copyright © 2010 Elsevier B.V. All rights reserved.

  19. Mimetic finite difference method for the stokes problem on polygonal meshes

    Energy Technology Data Exchange (ETDEWEB)

    Lipnikov, K [Los Alamos National Laboratory; Beirao Da Veiga, L [DIPARTIMENTO DI MATE; Gyrya, V [PENNSYLVANIA STATE UNIV; Manzini, G [ISTIUTO DI MATEMATICA

    2009-01-01

    Various approaches to extend the finite element methods to non-traditional elements (pyramids, polyhedra, etc.) have been developed over the last decade. Building of basis functions for such elements is a challenging task and may require extensive geometry analysis. The mimetic finite difference (MFD) method has many similarities with low-order finite element methods. Both methods try to preserve fundamental properties of physical and mathematical models. The essential difference is that the MFD method uses only the surface representation of discrete unknowns to build stiffness and mass matrices. Since no extension inside the mesh element is required, practical implementation of the MFD method is simple for polygonal meshes that may include degenerate and non-convex elements. In this article, we develop a MFD method for the Stokes problem on arbitrary polygonal meshes. The method is constructed for tensor coefficients, which will allow to apply it to the linear elasticity problem. The numerical experiments show the second-order convergence for the velocity variable and the first-order for the pressure.

  20. Effective atomic numbers of some tissue substitutes by different methods: A comparative study

    Directory of Open Access Journals (Sweden)

    Vishwanath P Singh

    2014-01-01

    Full Text Available Effective atomic numbers of some human organ tissue substitutes such as polyethylene terephthalate, red articulation wax, paraffin 1, paraffin 2, bolus, pitch, polyphenylene sulfide, polysulfone, polyvinylchloride, and modeling clay have been calculated by four different methods like Auto-Z eff, direct, interpolation, and power law. It was found that the effective atomic numbers computed by Auto-Z eff , direct and interpolation methods were in good agreement for intermediate energy region (0.1 MeV < E < 5 MeV where the Compton interaction dominates. A large difference in effective atomic numbers by direct method and Auto-Z eff was observed in photo-electric and pair-production regions. Effective atomic numbers computed by power law were found to be close to direct method in photo-electric absorption region. The Auto-Z eff , direct and interpolation methods were found to be in good agreement for computation of effective atomic numbers in intermediate energy region (100 keV < E < 10 MeV. The direct method was found to be appropriate method for computation of effective atomic numbers in photo-electric region (10 keV < E < 100 keV. The tissue equivalence of the tissue substitutes is possible to represent by any method for computation of effective atomic number mentioned in the present study. An accurate estimation of Rayleigh scattering is required to eliminate effect of molecular, chemical, or crystalline environment of the atom for estimation of gamma interaction parameters.

  1. Investigation of colistin sensitivity via three different methods in Acinetobacter baumannii isolates with multiple antibiotic resistance.

    Science.gov (United States)

    Sinirtaş, Melda; Akalin, Halis; Gedikoğlu, Suna

    2009-09-01

    In recent years there has been an increase in life-threatening infections caused by Acinetobacter baumannii with multiple antibiotic resistance, which has lead to the use of polymyxins, especially colistin, being reconsidered. The aim of this study was to investigate the colistin sensitivity of A. baumannii isolates with multiple antibiotic resistance via different methods, and to evaluate the disk diffusion method for colistin against multi-resistant Acinetobacter isolates, in comparison to the E-test and Phoenix system. The study was carried out on 100 strains of A. baumannii (colonization or infection) isolated from the microbiological samples of different patients followed in the clinics and intensive care units of Uludağ University Medical School between the years 2004 and 2005. Strains were identified and characterized for their antibiotic sensitivity by Phoenix system (Becton Dickinson, Sparks, MD, USA). In all studied A. baumannii strains, susceptibility to colistin was determined to be 100% with the disk diffusion, E-test, and broth microdilution methods. Results of the E-test and broth microdilution method, which are accepted as reference methods, were found to be 100% consistent with the results of the disk diffusion tests; no very major or major error was identified upon comparison of the tests. The sensitivity and the positive predictive value of the disk diffusion method were found to be 100%. Colistin resistance in A. baumannii was not detected in our region, and disk diffusion method results are in accordance with those of E-test and broth microdilution methods.

  2. Different Chromatographic Methods for Simultaneous Determination of Mefenamic Acid and Two of Its Toxic Impurities.

    Science.gov (United States)

    Morcoss, Martha M; Abdelwahab, Nada S; Ali, Nouruddin W; Elsaady, Mohammed T

    2017-08-01

    Two sensitive, accurate and precise chromatographic methods mentioned as TLC-densitometric method and RP-HPLC-DAD method, were developed and validated for the simultaneous determination of mefenamic acid (MEF) and its two toxic impurities, benzoic acid (BA) and 2,3-dimethylaniline (DMA). In the proposed TLC-densitometric method a developing system consisting of chloroform:acetone:acetic acid:ammonia solution(70:30:2:2, v/v/v/v) was used, TLC aluminum plates 60 F254 was used as a stationary phase and the separated bands were UV-scanned at 225 nm. While the proposed RP-HPLC-DAD method depended on chromatographic separation on C18 column using 0.05 M KH2PO4 buffer: acetonitrile (40:60, v/v) as a mobile phase at constant flow rate of 1 mL/min with UV detection at 225 nm. Linear relationships were obtained in the ranges of 0.3-2, 0.3-2 and 0.3-1.8 μg/band (for TLC-densitometric method) and in the ranges of 7-50, 10-50 and 7-50 μg/mL (for HPLC-DAD method) for MEF, BA and DMA, respectively. Factors affecting the developed methods have been studied and optimized. Moreover ,the proposed methods were successfully applied for determination of the studied drug in its pharmaceutical dosage form. The methods showed no significance difference when compared with the reported method using F-test and Student's-t test. The low of detection and quantization limits of the proposed methods get them suitable for quality control and stability studies of MEF in pharmaceutical formulation. The developed methods have advantages of being more selective and sensitive than the published methods. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. The solitary wave solution of coupled Klein-Gordon-Zakharov equations via two different numerical methods

    Science.gov (United States)

    Dehghan, Mehdi; Nikpour, Ahmad

    2013-09-01

    In this research, we propose two different methods to solve the coupled Klein-Gordon-Zakharov (KGZ) equations: the Differential Quadrature (DQ) and Globally Radial Basis Functions (GRBFs) methods. In the DQ method, the derivative value of a function with respect to a point is directly approximated by a linear combination of all functional values in the global domain. The principal work in this method is the determination of weight coefficients. We use two ways for obtaining these coefficients: cosine expansion (CDQ) and radial basis functions (RBFs-DQ), the former is a mesh-based method and the latter categorizes in the set of meshless methods. Unlike the DQ method, the GRBF method directly substitutes the expression of the function approximation by RBFs into the partial differential equation. The main problem in the GRBFs method is ill-conditioning of the interpolation matrix. Avoiding this problem, we study the bases introduced in Pazouki and Schaback (2011) [44]. Some examples are presented to compare the accuracy and easy implementation of the proposed methods. In numerical examples, we concentrate on Inverse Multiquadric (IMQ) and second-order Thin Plate Spline (TPS) radial basis functions. The variable shape parameter (exponentially and random) strategies are applied in the IMQ function and the results are compared with the constant shape parameter.

  4. Assessing and comparison of different machine learning methods in parent-offspring trios for genotype imputation.

    Science.gov (United States)

    Mikhchi, Abbas; Honarvar, Mahmood; Kashan, Nasser Emam Jomeh; Aminafshar, Mehdi

    2016-06-21

    Genotype imputation is an important tool for prediction of unknown genotypes for both unrelated individuals and parent-offspring trios. Several imputation methods are available and can either employ universal machine learning methods, or deploy algorithms dedicated to infer missing genotypes. In this research the performance of eight machine learning methods: Support Vector Machine, K-Nearest Neighbors, Extreme Learning Machine, Radial Basis Function, Random Forest, AdaBoost, LogitBoost, and TotalBoost compared in terms of the imputation accuracy, computation time and the factors affecting imputation accuracy. The methods employed using real and simulated datasets to impute the un-typed SNPs in parent-offspring trios. The tested methods show that imputation of parent-offspring trios can be accurate. The Random Forest and Support Vector Machine were more accurate than the other machine learning methods. The TotalBoost performed slightly worse than the other methods.The running times were different between methods. The ELM was always most fast algorithm. In case of increasing the sample size, the RBF requires long imputation time.The tested methods in this research can be an alternative for imputation of un-typed SNPs in low missing rate of data. However, it is recommended that other machine learning methods to be used for imputation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Various electroanalytical methods for the determination of uranium in different matrices

    Directory of Open Access Journals (Sweden)

    Alankar Shrivastava

    2013-06-01

    Full Text Available Uranium is a toxic material hence numerous body systems such as the kidney, brain, liver, and heart can be affected by uranium exposure. The main effect is kidney toxicity. Uranium is a naturally occurring element found in low levels in all rock, soil, and water. All uranium isotopes may also cause radiation hazards, thus without any doubt an analysis of such materials in the surrounding environment is very important. The presented review is a summarization of all electroanalytical techniques for the determination of uranium and its compounds in various matrices. Totally 43 different methods are found in our literature survey. Out of these three are polarographic, 25 potentiometry, five capillary electrophoresis and 28 voltametric methods are available in the literature. Interferences of different ions and applications in different matrices are also given for each method.

  6. Evaluation of NaCl Salinity Stress Using Three Different Laboratory Methods

    Directory of Open Access Journals (Sweden)

    S Laleh

    2012-02-01

    Full Text Available To investigate the effects of different salinity levels of NaCl on germination of safflower (cv. Esfahan 24 seeds under three different incubation methods, a factorial experiment was carried out based on a complete randomize design with three replications. Salinity levels were 0, 5, 10, 15 and 20 dSm-1 (NaCl and incubation methods were sandwich method, and using petri dishes with open or closed doors. The results showed that among investigated traits, including germination percentage and rate, length, fresh and dry weight of root and shoot, salinity had the highest negative correlation with germination percentage. There was not a significant difference in germination percentage between 5 dSm-1 and control, but increasing salinity levels to 10, 15 and 20 dSm-1 led to 13, 23.50 and 39.74 % reduction in germination percentage, respectively, compared to control (P

  7. Efficacy of evaluation of rooster sperm morphology using different staining methods.

    Science.gov (United States)

    Lukaszewicz, E; Jerysz, A; Partyka, A; Siudzińska, A

    2008-12-01

    This work focused on inexpensive methods of evaluation fowl sperm morphology, based on eosin-nigrosin smears, which can determine disorders in spermatogenesis and can be recommended for evaluating the fertilising potency and selecting males in flocks reproduced by artificial insemination. Four fowl breeds (Black Minorca, Italian Partridge, Forwerk and Greenleg Partridge) were used to determine the efficacy of sperm morphology evaluation using four eosin-nigrosin staining methods (according to Blom, Bakst and Cecil, Morisson, Jaśkowski) and three examiners of different experience (high, medium, novice). There were significant (P< or = 0.01) differences in sperm morphology between Blom's staining method and those of Bakst and Cecil, Morisson or Jaśkowski, irrespective of fowl breed and examiners experience. Blom stain caused sperm head swelling and showed a drastic reduction in the proportion of live spermatozoa with normal morphology. The staining method had a greater influence on sperm morphology evaluation than the experience of the examiners.

  8. Effect of Dietary Fiber Enrichment and Different Cooking Methods on Quality of Chicken Nuggets.

    Science.gov (United States)

    Pathera, Ashok K; Riar, C S; Yadav, Sanjay; Sharma, D P

    2017-01-01

    The effect of dietary fiber enrichment (wheat bran) and cooking methods (oven, steam and microwave) on functional and physico-chemical properties of raw nuggets formulation as well as nutritional, color and textural properties of chicken nuggets were analyzed in this study. Among different cooking methods used for nuggets preparation, steam cooked nuggets had significantly ( p cooking yield (97.16%) and total dietary fiber content (4.32%) in comparison to oven and microwave cooked nuggets. The effect of cooking methods and wheat bran incorporation was also noticed on textural properties of the nuggets. Hardness, firmness and toughness values of oven and steam cooked nuggets were significantly ( p cooked nuggets. Among nuggets prepared by different cooking methods, cohesiveness of microwave cooked nuggets was found to be significantly ( p cooked nuggets had significantly ( p cooked nuggets were found to be better among all nuggets due to their higher cooking yield and dietary fiber content.

  9. Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study.

    Science.gov (United States)

    Nunes, Cláudia; Santos, Joana; da Silva, Manuela Vieira; Lourenço, Irina; Carvalhais, Carlos

    2015-01-01

    The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

  10. Influence of different curing methods on the fatty acid composition in sausages prepared from red deer meat

    Directory of Open Access Journals (Sweden)

    Marek Šnirc

    2016-11-01

    Full Text Available These curing agents play a decisive role in obtaining the specific sensory properties, stability and hygienic safety of products such as fermented sausages, ham and, more recently, emulsion type of sausages. The effect of using two different curing agents (sodium chloride and nitrate on fatty acid compounds in dry-cured deer meat was investigated in our study. The concentration of free fatty acids in the fat depends on the hydrolytic activity of the lipases, the microbial metabolic processes, and the oxidative reactions that work on the free fatty acids released in the lipolysis. The main identified fatty acids in all different types of curing were palmitic acid (16 : 0, oleic acid (c18 : 1 cis-9, stearic acid (C18 : 0. The resulting n-6/n-3 PUFA ratio in the muscle samples of red deer showed no variation in different types of curing and was beneficially low within the range of 3.9 : 1 and 4.49 : 1. Total free fatty acids, whether saturated, monounsaturated or polyunsaturated fatty acids, did not increased (p >0.05 greatly through the processing of dry-cured deer meat. Also there was no effect of curing method on fatty acids composition in two different muscles Semitendinosus muscle (ANOVA, p >0.05, F - 0.003, F crit. - 3.041 and Triceps brachii muscle (ANOVA, p >0.05, F - 0.05, F crit. - 3.01. There were found no significant (p >0.05 differences between fatty acids content in sausages prepared by brining in NaCl and Nitrate salt. The present study revealed that game meat can function as a good source of bioactive compounds that are essential for human nutrition. 

  11. The comparison of MCNP perturbation technique with MCNP difference method in critical calculation

    International Nuclear Information System (INIS)

    Liu Bin; Lv Xuefeng; Zhao Wei; Wang Kai; Tu Jing; Ouyang Xiaoping

    2010-01-01

    For a nuclear fission system, we calculated Δk eff , which arise from system material composition changes, by two different approaches, the MCNP perturbation technique and the MCNP difference method. For every material composition change, we made four different runs, each run with different cycles or each cycle generating different neutrons, then we compared the two Δk eff that are obtained by two different approaches. As a material composition change in any particular cell of the nuclear fission system is small compared to the material compositions in the whole nuclear fission system, in other words, this composition change can be treated as a small perturbation, the Δk eff results obtained from the MCNP perturbation technique are much quicker, much more efficient and reliable than the results from the MCNP difference method. When a material composition change in any particular cell of the nuclear fission system is significant compared to the material compositions in the whole nuclear fission system, both the MCNP perturbation technique and the MCNP difference method can give satisfactory results. But for the run with the same cycles and each cycle generating the same neutrons, the results obtained from the MCNP perturbation technique are systemically less than the results obtained from the MCNP difference method. To further confirm our calculation results from the MCNP4C, we run the exact same MCNP4C input file in MCNP5, the calculation results from MCNP5 are the same as the calculation results from MCNP4C. We need caution when using the MCNP perturbation technique to calculate the Δk eff as the material composition change is large compared to the material compositions in the whole nuclear fission system, even though the material composition changes of any particular cell of the fission system still meet the criteria of MCNP perturbation technique.

  12. A practical implicit finite-difference method: examples from seismic modelling

    International Nuclear Information System (INIS)

    Liu, Yang; Sen, Mrinal K

    2009-01-01

    We derive explicit and new implicit finite-difference formulae for derivatives of arbitrary order with any order of accuracy by the plane wave theory where the finite-difference coefficients are obtained from the Taylor series expansion. The implicit finite-difference formulae are derived from fractional expansion of derivatives which form tridiagonal matrix equations. Our results demonstrate that the accuracy of a (2N + 2)th-order implicit formula is nearly equivalent to that of a (6N + 2)th-order explicit formula for the first-order derivative, and (2N + 2)th-order implicit formula is nearly equivalent to (4N + 2)th-order explicit formula for the second-order derivative. In general, an implicit method is computationally more expensive than an explicit method, due to the requirement of solving large matrix equations. However, the new implicit method only involves solving tridiagonal matrix equations, which is fairly inexpensive. Furthermore, taking advantage of the fact that many repeated calculations of derivatives are performed by the same difference formula, several parts can be precomputed resulting in a fast algorithm. We further demonstrate that a (2N + 2)th-order implicit formulation requires nearly the same memory and computation as a (2N + 4)th-order explicit formulation but attains the accuracy achieved by a (6N + 2)th-order explicit formulation for the first-order derivative and that of a (4N + 2)th-order explicit method for the second-order derivative when additional cost of visiting arrays is not considered. This means that a high-order explicit method may be replaced by an implicit method of the same order resulting in a much improved performance. Our analysis of efficiency and numerical modelling results for acoustic and elastic wave propagation validates the effectiveness and practicality of the implicit finite-difference method

  13. Comparative Evaluation of Viability of Encapsulated Lactobacillus casei Using Two Different Methods of Microencapsulation

    OpenAIRE

    Petreska Ivanovska, Tanja; Smilkov, Katarina; Zivikj, Zoran; Petrusevska Tozi, Lidija; Mladenovska, Kristina

    2014-01-01

    Microencapsulation using two different methods, spray- drying and emulsion technique were applied to preserve the viability of the probiotic Lactobacillus casei during manufacture and refrigerated storage. As coating materials to encapsulate the probiotic by spray-drying method, compatible biopolymers alginate and chitosan were utilized, while as a cross-linking agent, CaCl2 was used. In addition to the probiotic, oligofructose enriched inulin (Synergy 1®) as prebiotic was added to the medium...

  14. Comparison of different methods for liquid level adjustment in tank prover calibration

    International Nuclear Information System (INIS)

    Garcia, D A; Farias, E C; Gabriel, P C; Aquino, M H; Gomes, R S E; Aibe, V Y

    2015-01-01

    The adjustment of the liquid level during the calibration of tank provers with fixed volume is normally done by overfill but it can be done in different ways. In this article four level adjustment techniques are compared: plate, pipette, ruler and overfill adjustment. The adjustment methods using plate and pipette presented good agreement with the tank's nominal volume and lower uncertainty among the tested methods

  15. Haulage Methods in Different Areas of Nepal and the Health Condition of the Porters in Kathmandu

    OpenAIRE

    Kaneda, Eiko; Yamauchi, Masaki; Ohwatari, Nobu; Lee, Jeong-Beom; Kosaka, Mitsuo

    1999-01-01

    The complicated geographical features of Nepal make transport of goods difficult. People have to depend on human power even today, especially porters who use a number of different transport styles. The objectives of this study were to document (1) the characteristics of haulage methods in relation to the geographical conditions, and (2) the diurnal activities and health of porters in Kathmandu. The observed methods used by the porters in Nepal to carry loads were divided into four main classe...

  16. Comparison between different dispersion engineering methods in slow light photonic crystal waveguides

    DEFF Research Database (Denmark)

    Wang, Fengwen; Jensen, Jakob Søndergaard; Sigmund, Ole

    2011-01-01

    This paper compares the performance of different dispersion engineering methods in slow light photonic crystal waveguides, i.e., geometrical parameter optimization and topology optimization. In both methods, the design robustness is enforced by considering the dilated, intermediate and eroded...... that waveguides with optimized hole sizes and positions can be efficient for dispersion engineering but that large improvements are possible if irregular geometries are allowed using topology optimization....

  17. Life cycle environmental impacts of different construction wood waste and wood packaging waste processing methods

    OpenAIRE

    Manninen, Kaisa; Judl, Jáchym; Myllymaa, Tuuli

    2016-01-01

    This study compared the life cycle environmental impacts of different wood waste processing methods in three impact categories: climate impact, acidification impacts and eutrophication impacts. The wood waste recovery methods examined were the use of wood waste in terrace boards made out of wood composite which replace impregnated terrace boards, incineration of wood waste in a multi-fuel boiler instead of peat and the use of wood waste in the production of particleboard in either Finland or ...

  18. A comparative study: the impact of different lipid extraction methods on current microalgal lipid research

    Science.gov (United States)

    2014-01-01

    Microalgae cells have the potential to rapidly accumulate lipids, such as triacylglycerides that contain fatty acids important for high value fatty acids (e.g., EPA and DHA) and/or biodiesel production. However, lipid extraction methods for microalgae cells are not well established, and there is currently no standard extraction method for the determination of the fatty acid content of microalgae. This has caused a few problems in microlagal biofuel research due to the bias derived from different extraction methods. Therefore, this study used several extraction methods for fatty acid analysis on marine microalga Tetraselmis sp. M8, aiming to assess the potential impact of different extractions on current microalgal lipid research. These methods included classical Bligh & Dyer lipid extraction, two other chemical extractions using different solvents and sonication, direct saponification and supercritical CO2 extraction. Soxhlet-based extraction was used to weigh out the importance of solvent polarity in the algal oil extraction. Coupled with GC/MS, a Thermogravimetric Analyser was used to improve the quantification of microalgal lipid extractions. Among these extractions, significant differences were observed in both, extract yield and fatty acid composition. The supercritical extraction technique stood out most for effective extraction of microalgal lipids, especially for long chain unsaturated fatty acids. The results highlight the necessity for comparative analyses of microalgae fatty acids and careful choice and validation of analytical methodology in microalgal lipid research. PMID:24456581

  19. Some New Lie Symmetry Groups of Differential-Difference Equations Obtained from a Simple Direct Method

    International Nuclear Information System (INIS)

    Zhi Hongyan

    2009-01-01

    In this paper, based on the symbolic computing system Maple, the direct method for Lie symmetry groups presented by Sen-Yue Lou [J. Phys. A: Math. Gen. 38 (2005) L129] is extended from the continuous differential equations to the differential-difference equations. With the extended method, we study the well-known differential-difference KP equation, KZ equation and (2+1)-dimensional ANNV system, and both the Lie point symmetry groups and the non-Lie symmetry groups are obtained.

  20. Measuring device and method for dimples height differences of 17 x 17 grid

    International Nuclear Information System (INIS)

    Xu Yilan; Zheng Zhihui; Yan Liwei; Wang Xihe

    2001-01-01

    There are 264 cell for fastening fuel rods in the grid of 17 x 17 fuel assembly of PWR. The height differences of top and bottom dimples in a grid is an important quality characteristic of the grid. The report deals with measuring machine and method for dimples height differences of the grid. The device has two measuring probes. The Parallel Leaf Spring is used for transmitting the little displacement between two probes. The uncertainty of the device is σ≤4 μm. The measuring method is shown to be practicable

  1. Analysis of equilibrium in a tokamak by the finite-difference method

    International Nuclear Information System (INIS)

    Kim, K.E.; Jeun, G.D.

    1983-01-01

    Ideal magnetohydrodynamic equilibrium in a Tokamak having a small radius with an elongated rectangular cross section is studied by applying the finite-difference method to the Grad-Shafranov equation to determine possible limitations for *b=8*pPsup(2)/Bsup(2). The coupled first-order differential equations resulting from the finite-difference Grad-Shafranov equation is solved by the numarical method:1)We concluded that equilibrium consideration alone gives no limitation even for *b approx.1. 2)We have obtained the equilibrium magnetic field configuration charcterized by a set of three parameters;the aspect ratio, *b,and the safety factor. (Author)

  2. Effectiveness of different tutorial recitation teaching methods and its implications for TA training

    Directory of Open Access Journals (Sweden)

    Kathleen M. Koenig

    2007-05-01

    Full Text Available We present results from a comparative study of student understanding for students who attended recitation classes that used different teaching methods. Student volunteers from our introductory calculus-based physics course attended a special recitation class that was taught using one of four different teaching methods. A total of 272 students were divided into approximately equal groups for each method. Students in each class were taught the same topic, “Changes in Energy and Momentum,” from Tutorials in Introductory Physics. The different teaching methods varied in the amount of student and teacher engagement. Student understanding was evaluated through pre- and post-tests. Our results demonstrate the importance of the instructor’s role in teaching recitation classes. The most effective teaching method was for students working in cooperative learning groups with the instructors questioning the groups using Socratic dialogue. In addition, we investigated student preferences for modes of instruction through an open-ended survey. Our results provide guidance and evidence for the teaching methods that should be emphasized in training course instructors.

  3. Direct Calculation of Permeability by High-Accurate Finite Difference and Numerical Integration Methods

    KAUST Repository

    Wang, Yi

    2016-07-21

    Velocity of fluid flow in underground porous media is 6~12 orders of magnitudes lower than that in pipelines. If numerical errors are not carefully controlled in this kind of simulations, high distortion of the final results may occur [1-4]. To fit the high accuracy demands of fluid flow simulations in porous media, traditional finite difference methods and numerical integration methods are discussed and corresponding high-accurate methods are developed. When applied to the direct calculation of full-tensor permeability for underground flow, the high-accurate finite difference method is confirmed to have numerical error as low as 10-5% while the high-accurate numerical integration method has numerical error around 0%. Thus, the approach combining the high-accurate finite difference and numerical integration methods is a reliable way to efficiently determine the characteristics of general full-tensor permeability such as maximum and minimum permeability components, principal direction and anisotropic ratio. Copyright © Global-Science Press 2016.

  4. Great Lakes Environmental Database (GLENDA)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Great Lakes Environmental Database (GLENDA) houses environmental data on a wide variety of constituents in water, biota, sediment, and air in the Great Lakes area.

  5. Investigating water productivity and economic efficiency of wheat-crop under different sowing methods

    International Nuclear Information System (INIS)

    Mirani, A.A.; Dahri, Z.H.

    2011-01-01

    This study was conducted at PARC's research station Kala Shah Kaku, Lahore, in order to calculate the water productivity and economic efficiency of wheat-crop under different sowing methods in a combined harvested paddy filed. The sowing methods were direct drilling with FMI Seeder, Zero tillage and conventional method. Data were collected during 2008-09. Wheat-yield was 2750 kg/ha, 2665 kg/ha and 2610 kg/ha for direct drilling with F MI Seeder, Zero tillage and conventional method, respectively. The direct drilling in heavy residue gave 5.4 % more yield than the conventional method and 3.2 % more yield than zero tillage. The zero tillage ensured 2.1% more yield than the conventional method. The net water applied as 323, 354, and 380 mm for direct drilling with FMI seeder, zero tillage and conventional methods respectively against the potential crop evapotranspiration of 383 mm. This indicates that the direct drilling of wheat-crop in heave rice stubbles saves 15% irrigation water as compared to conventional method and 8.8% over zero tillage. The zero tillage method saves 6.8 % of irrigation water over the conventional method. The water productivity was found to be 0.851 kg/m3. 0.753 kg/m/sup 3/ and 0.687 kg/m/sup 3/ for direct drilling with FMI Seeder, Zero tillage and conventional method respectively. This indicates that the direct drilling ensures 23.9% increase in water productivity over conventional method and 13.01% over zero tillage. The zero tillage gave 9.6% more water productivity than the conventional method. The costs of production for the three sowing methods were Rs. 39123/ha, Rs.43737/ha and Rs. 53047/ha for direct drilling, zero tillage and conventional method respectively. This indicates an overall saving of Rs. 13924/ha (26.2 %) by the direct drilling method as compared to the conventional method and Rs. 4613/ha (10.5%) over zero tillage method. The zero tillage saves Rs. 9319/ha (17.6 %) over the conventional method. Thus, the resource

  6. Discrimination of Rice with Different Pretreatment Methods by Using a Voltammetric Electronic Tongue

    Directory of Open Access Journals (Sweden)

    Li Wang

    2015-07-01

    Full Text Available In this study, an application of a voltammetric electronic tongue for discrimination and prediction of different varieties of rice was investigated. Different pretreatment methods were selected, which were subsequently used for the discrimination of different varieties of rice and prediction of unknown rice samples. To this aim, a voltammetric array of sensors based on metallic electrodes was used as the sensing part. The different samples were analyzed by cyclic voltammetry with two sample-pretreatment methods. Discriminant Factorial Analysis was used to visualize the different categories of rice samples; however, radial basis function (RBF artificial neural network with leave-one-out cross-validation method was employed for prediction modeling. The collected signal data were first compressed employing fast Fourier transform (FFT and then significant features were extracted from the voltammetric signals. The experimental results indicated that the sample solutions obtained by the non-crushed pretreatment method could efficiently meet the effect of discrimination and recognition. The satisfactory prediction results of voltammetric electronic tongue based on RBF artificial neural network were obtained with less than five-fold dilution of the sample solution. The main objective of this study was to develop primary research on the application of an electronic tongue system for the discrimination and prediction of solid foods and provide an objective assessment tool for the food industry.

  7. A Cross-Classified CFA-MTMM Model for Structurally Different and Nonindependent Interchangeable Methods.

    Science.gov (United States)

    Koch, Tobias; Schultze, Martin; Jeon, Minjeong; Nussbeck, Fridtjof W; Praetorius, Anna-Katharina; Eid, Michael

    2016-01-01

    Multirater (multimethod, multisource) studies are increasingly applied in psychology. Eid and colleagues (2008) proposed a multilevel confirmatory factor model for multitrait-multimethod (MTMM) data combining structurally different and multiple independent interchangeable methods (raters). In many studies, however, different interchangeable raters (e.g., peers, subordinates) are asked to rate different targets (students, supervisors), leading to violations of the independence assumption and to cross-classified data structures. In the present work, we extend the ML-CFA-MTMM model by Eid and colleagues (2008) to cross-classified multirater designs. The new C4 model (Cross-Classified CTC[M-1] Combination of Methods) accounts for nonindependent interchangeable raters and enables researchers to explicitly model the interaction between targets and raters as a latent variable. Using a real data application, it is shown how credibility intervals of model parameters and different variance components can be obtained using Bayesian estimation techniques.

  8. On the Stability of the Finite Difference based Lattice Boltzmann Method

    KAUST Repository

    El-Amin, Mohamed; Sun, Shuyu; Salama, Amgad

    2013-01-01

    This paper is devoted to determining the stability conditions for the finite difference based lattice Boltzmann method (FDLBM). In the current scheme, the 9-bit two-dimensional (D2Q9) model is used and the collision term of the Bhatnagar- Gross-Krook (BGK) is treated implicitly. The implicitness of the numerical scheme is removed by introducing a new distribution function different from that being used. Therefore, a new explicit finite-difference lattice Boltzmann method is obtained. Stability analysis of the resulted explicit scheme is done using Fourier expansion. Then, stability conditions in terms of time and spatial steps, relaxation time and explicitly-implicitly parameter are determined by calculating the eigenvalues of the given difference system. The determined conditions give the ranges of the parameters that have stable solutions.

  9. On the Stability of the Finite Difference based Lattice Boltzmann Method

    KAUST Repository

    El-Amin, Mohamed

    2013-06-01

    This paper is devoted to determining the stability conditions for the finite difference based lattice Boltzmann method (FDLBM). In the current scheme, the 9-bit two-dimensional (D2Q9) model is used and the collision term of the Bhatnagar- Gross-Krook (BGK) is treated implicitly. The implicitness of the numerical scheme is removed by introducing a new distribution function different from that being used. Therefore, a new explicit finite-difference lattice Boltzmann method is obtained. Stability analysis of the resulted explicit scheme is done using Fourier expansion. Then, stability conditions in terms of time and spatial steps, relaxation time and explicitly-implicitly parameter are determined by calculating the eigenvalues of the given difference system. The determined conditions give the ranges of the parameters that have stable solutions.

  10. Bearing Capacity Analyses for the Great Belt East Bridge Anchor Blocks

    DEFF Research Database (Denmark)

    Sørensen, Carsten Steen; Clausen, Carl J. Frimann; Andersen, Henrik

    1993-01-01

    This paper presents a comparison between different methods of bearing capacity analyses: Upper Bound Method. Limit Equilibrium Analysis and Finite Element Analysis. For the Great Belt East Bridge anchor blocks it was concluded that these methods of calculation agree within 5%. However, for cases ...

  11. Analysis of multi lobe journal bearings with surface roughness using finite difference method

    Science.gov (United States)

    PhaniRaja Kumar, K.; Bhaskar, SUdaya; Manzoor Hussain, M.

    2018-04-01

    Multi lobe journal bearings are used for high operating speeds and high loads in machines. In this paper symmetrical multi lobe journal bearings are analyzed to find out the effect of surface roughnessduring non linear loading. Using the fourth order RungeKutta method, time transient analysis was performed to calculate and plot the journal centre trajectories. Flow factor method is used to evaluate the roughness and the finite difference method (FDM) is used to predict the pressure distribution over the bearing surface. The Transient analysis is done on the multi lobe journal bearings for threedifferent surface roughness orientations. Longitudinal surface roughness is more effective when compared with isotopic and traverse surface roughness.

  12. Comparative analysis of different methods of modelling of most loaded fuel pin in transients

    International Nuclear Information System (INIS)

    Ovdiyenko, Y.; Khalimonchuk, V.; Ieremenko, M.

    2007-01-01

    Different methods of modeling of most loaded fuel pin are presented at the work. Calculation studies are performed on example of accident related to WWER-1000 cluster rod ejection with using of spatial kinetic code DYN3D that uses nodal method to calculate distribution of neutron flux in the core. Three methods of modeling of most loaded fuel pin are considered - flux reconstruction in fuel macrocell, pin-by-pin calculation by using of DYN3D/DERAB package and by introducing of additional 'hot channel'. Obtained results of performed studies could be used for development of calculation kinetic models during preparing of safety analysis report (Authors)

  13. Granulometric analysis of metallic oxide in ceramic powder form synthesized by different methods

    International Nuclear Information System (INIS)

    Neiva, L.S.; Simoes, A.N.; Simoes, V.N.; Bispo, A.; Gama, L.

    2012-01-01

    The aim of this work is to synthesize ceramic powders based on CuO/CeO 2 by means two different synthesis methods, they are: the combustion reaction method and Pechini method. It's part of the aim of this work subject all samples to a synthesized qualitative and quantitative chemical analysis, using the technique EDX and then to a granulometric analysis. The samples of the ceramic powder based on CuO/CeO 2 synthesized in this work by means of the two above synthesis methods, contain various concentrations of CuO ranging between 0 and 0.5 mol. According to the results, only the Pechini method of synthesis exerted a significant and defined influence on the capacity of particle unit agglomeration in these powders (author)

  14. Feasibility of the correlation curves method in calorimeters of different types

    OpenAIRE

    Grushevskaya, E. A.; Lebedev, I. A.; Fedosimova, A. I.

    2014-01-01

    The simulation of the development of cascade processes in calorimeters of different types for the implementation of energy measurement by correlation curves method, is carried out. Heterogeneous calorimeter has a significant transient effects, associated with the difference of the critical energy in the absorber and the detector. The best option is a mixed calorimeter, which has a target block, leading to the rapid development of the cascade, and homogeneous measuring unit. Uncertainties of e...

  15. Multinomial Response Models, for Modeling and Determining Important Factors in Different Contraceptive Methods in Women

    Directory of Open Access Journals (Sweden)

    E Haji Nejad

    2001-06-01

    Full Text Available Difference aspects of multinomial statistical modelings and its classifications has been studied so far. In these type of problems Y is the qualitative random variable with T possible states which are considered as classifications. The goal is prediction of Y based on a random Vector X ? IR^m. Many methods for analyzing these problems were considered. One of the modern and general method of classification is Classification and Regression Trees (CART. Another method is recursive partitioning techniques which has a strange relationship with nonparametric regression. Classical discriminant analysis is a standard method for analyzing these type of data. Flexible discriminant analysis method which is a combination of nonparametric regression and discriminant analysis and classification using spline that includes least square regression and additive cubic splines. Neural network is an advanced statistical method for analyzing these types of data. In this paper properties of multinomial logistics regression were investigated and this method was used for modeling effective factors in selecting contraceptive methods in Ghom province for married women age 15-49. The response variable has a tetranomial distibution. The levels of this variable are: nothing, pills, traditional and a collection of other contraceptive methods. A collection of significant independent variables were: place, age of women, education, history of pregnancy and family size. Menstruation age and age at marriage were not statistically significant.

  16. Cost-benefit of three different methods for studying Mediterranean rocky benthic assemblages

    Directory of Open Access Journals (Sweden)

    Natàlia Sant

    2017-03-01

    Full Text Available Here we compare the applicability, the information provided and the cost-benefit of three sampling methods usually used in the study of rocky benthic assemblages. For comparative purposes, sampling was performed seasonally and along a depth gradient (0-50 m in the Cabrera Archipelago (western Mediterranean. The destructive scraping (collection method was the least cost-effective but provided the best qualitative and quantitative information. The in situ visual method was the most time-effective but provided low levels of taxonomic resolution and its accuracy decreased with depth due to the increasing difficulty of recognizing species in situ due to nitrogen narcosis, reduced light and cold. The photoquadrat method showed intermediate values of cost-effectiveness and information but was not suitable for multilayered assemblages, as it only accounted for the overstory. A canonical correspondence analysis showed that depth was highlighted as the main environmental gradient (16.0% of variance by the three methods. However, differences due to the sampling method (7.9% of variance were greater than differences due to temporal variability (5.8% of variance, suggesting that the three methods are valid but their selection has to be carefully assessed in relation to the targeted assemblages and the specific goals of each study.

  17. Advantages and Disadvantages of Different Methods of Hospitals' Downsizing: A Narrative Systematic Review

    Directory of Open Access Journals (Sweden)

    Yalda Mousazadeh

    2013-12-01

    Full Text Available Background:Hospitals as key actors in health systems face growing pressures especially cost cutting and search for cost-effective ways to resources management. Downsizing is one of these ways. This study was conducted to identify advantages and disadvantages of different methods of hospital' downsizing. Methods: The search was conducted in databases of Medlib, SID, Pub Med, Science Direct and Google Scholar Meta search engine by keywords of Downsizing, Hospital Downsizing, Hospital Rightsizing, Hospital Restructuring, Staff Downsizing, Hospital Merging, Hospital Reorganization and the Persian equivalents. Resulted 815 articles were studied and refined step by step. Finally, 27 articles were selected for analysis. Results: Five hospital downsizing methods were identified during searching. These methods were reducing the number of employees and beds, outsourcing, integration of hospital units, and the combination of these methods. The most important benefits were cost reduction, increasing patient satisfaction, increasing home care and outpatient services. The most important disadvantage included reducing access, reducing the rate of hospital admissions and increasing employees’ workload and dissatisfaction. Conclusion: Each downsizing method has strengths and weaknesses. Using different methods of downsizing, according to circumstances and applying appropriate interventions after implementation, is necessary for promotion.

  18. A longitudinal multilevel CFA-MTMM model for interchangeable and structurally different methods

    Science.gov (United States)

    Koch, Tobias; Schultze, Martin; Eid, Michael; Geiser, Christian

    2014-01-01

    One of the key interests in the social sciences is the investigation of change and stability of a given attribute. Although numerous models have been proposed in the past for analyzing longitudinal data including multilevel and/or latent variable modeling approaches, only few modeling approaches have been developed for studying the construct validity in longitudinal multitrait-multimethod (MTMM) measurement designs. The aim of the present study was to extend the spectrum of current longitudinal modeling approaches for MTMM analysis. Specifically, a new longitudinal multilevel CFA-MTMM model for measurement designs with structurally different and interchangeable methods (called Latent-State-Combination-Of-Methods model, LS-COM) is presented. Interchangeable methods are methods that are randomly sampled from a set of equivalent methods (e.g., multiple student ratings for teaching quality), whereas structurally different methods are methods that cannot be easily replaced by one another (e.g., teacher, self-ratings, principle ratings). Results of a simulation study indicate that the parameters and standard errors in the LS-COM model are well recovered even in conditions with only five observations per estimated model parameter. The advantages and limitations of the LS-COM model relative to other longitudinal MTMM modeling approaches are discussed. PMID:24860515

  19. Advantages and Disadvantages of Different Methods of Hospitals' Downsizing: A Narrative Systematic Review

    Science.gov (United States)

    Mousazadeh, Yalda; Jannati, Ali; Jabbari Beiramy, Hossein; AsghariJafarabadi, Mohammad; Ebadi, Ali

    2013-01-01

    Background: Hospitals as key actors in health systems face growing pres­sures especially cost cutting and search for costeffective ways to resources management. Downsizing is one of these ways. This study was conducted to identify advantages and disadvantages of different methods of hospital' downsizing. Methods:The search was conducted in databases of Medlib, SID, Pub Med, Science Direct and Google Scholar Meta search engine by keywords of Downsizing, Hospital Downsizing, Hospital Rightsizing, Hospital Restructuring, Staff Downsizing, Hospital Merging, Hospital Reorganization and the Persian equivalents. Resulted 815 articles were studied and refined step by step. Finally, 27 articles were selected for analysis. Results: Five hospital downsizing methods were identified during searching. These methods were reducing the number of employees and beds, outsourcing, integration of hospital units, and the combination of these methods. The most important benefits were cost reduction, increasing patient satisfaction, increasing home care and outpatient services. The most important disadvantage included reducing access, reducing the rate of hospital admissions and increasing employees’ workload and dissatisfaction. Conclusion: Each downsizing method has strengths and weaknesses. Using different methods of downsizing, according to circumstances and applying appropriate interventions after implementation, is necessary for promotion. PMID:24688978

  20. Different partial volume correction methods lead to different conclusions: An (18)F-FDG-PET study of aging.

    Science.gov (United States)

    Greve, Douglas N; Salat, David H; Bowen, Spencer L; Izquierdo-Garcia, David; Schultz, Aaron P; Catana, Ciprian; Becker, J Alex; Svarer, Claus; Knudsen, Gitte M; Sperling, Reisa A; Johnson, Keith A

    2016-05-15

    A cross-sectional group study of the effects of aging on brain metabolism as measured with (18)F-FDG-PET was performed using several different partial volume correction (PVC) methods: no correction (NoPVC), Meltzer (MZ), Müller-Gärtner (MG), and the symmetric geometric transfer matrix (SGTM) using 99 subjects aged 65-87years from the Harvard Aging Brain study. Sensitivity to parameter selection was tested for MZ and MG. The various methods and parameter settings resulted in an extremely wide range of conclusions as to the effects of age on metabolism, from almost no changes to virtually all of cortical regions showing a decrease with age. Simulations showed that NoPVC had significant bias that made the age effect on metabolism appear to be much larger and more significant than it is. MZ was found to be the same as NoPVC for liberal brain masks; for conservative brain masks, MZ showed few areas correlated with age. MG and SGTM were found to be similar; however, MG was sensitive to a thresholding parameter that can result in data loss. CSF uptake was surprisingly high at about 15% of that in gray matter. The exclusion of CSF from SGTM and MG models, which is almost universally done, caused a substantial loss in the power to detect age-related changes. This diversity of results reflects the literature on the metabolism of aging and suggests that extreme care should be taken when applying PVC or interpreting results that have been corrected for partial volume effects. Using the SGTM, significant age-related changes of about 7% per decade were found in frontal and cingulate cortices as well as primary visual and insular cortices. Copyright © 2016 Elsevier Inc. All rights reserved.