WorldWideScience

Sample records for methods descriptive note

  1. Notes on Japanese Rhizocephala, with description of two new species

    NARCIS (Netherlands)

    Boschma, H.

    1935-01-01

    The following notes are based upon material of parasites on two Crustaceans from Japan, viz., Pachygrapsus crassipes Randall and Petrolisthes japonicus de Haan 1). Each of these two species may be infested by two different species of Rhizocephala: on Pachygrapsus crassipes occur the parasites

  2. Immigrant fertility in Sweden, 2000-2011: A descriptive note

    Directory of Open Access Journals (Sweden)

    Lotta Persson

    2014-03-01

    Full Text Available Background: Modern Scandinavian population registers provide excellent data sources that allow a user to quickly gain an impression of the level of fertility and its structure across subpopulations. This may also allow the analyst to check a feature of the much-cited disruption hypothesis, at least in part. Objective: The purpose of this note is to exploit this potential to give an overview of the structure of recent total fertility after immigration to Sweden from various groups of sending countries, separately for males and females. In the process we demonstrate to what extent the post-migration fertility compensation which is part of the fertility disruption hypothesis is fulfilled in our study population. Due to the nature of our data we have refrained from studying fertility before migration. Methods: Based on data from a combination of two Swedish administrative registers (the Historic Population Register and the Multi-Generation Register that cover both men and women in the entire population for the years 2000-2011, we compute and plot TFR-like age-cumulated fertility levels, specific for years since immigration, for six groups of sending countries, separately for men and women. Results: We find that the post-migration fertility compensation specified as part of the fertility disruption hypothesis is visibly confirmed in our Swedish study population for female European immigrants from non-EU countries and for female immigrants from non-European countries with a low or medium UN Human Development Index, but not so for other female immigrants, i.e. not for those who come from a Nordic country or from a non-Nordic EU country, and not for female immigrants from a non-European country with a high Human Development Index, including the United States. We find mild but less conclusive evidence for the same feature for males. Conclusions: This shows that at least as far as post-migration fertility compensation is concerned, the disruption

  3. A Note on the Field-Theoretical Description of Superfluids

    CERN Document Server

    Andrianopoli, L; Grassi, P A; Trigiante, M

    2014-01-01

    Recently, a Lagrangian description of superfluids attracted some interest from the fluid/gravity-correspondence viewpoint. In this respect, the work of Dubovksy et al. has proposed a new field theoretical description of fluids, which has several interesting aspects. On another side, we have provided in arXiv:1304.2206 a supersymmetric extension of the original works. In the analysis of the Lagrangian structures a new invariant appeared which, although related to known invariants, provides, in our opinion, a better parametrisation of the fluid dynamics in order to describe the fluid/superfluid phases.

  4. Teaching Furlow palatoplasty: the sticky note method.

    Science.gov (United States)

    Liu, Mona Mengyue; Kim, JeeHong; Jabbour, Noel

    2014-11-01

    The double-opposing Z-plasty (Furlow palatoplasty) procedure is a well-established method for palate repair in children. We propose a simple and easily accessible sticky note model to demonstrate the lengthening in palatal anatomy afforded by this technically challenging procedure. Our model involves creating a lengthened three-dimensional representation of the Z-plasty through making specified incisions and rearrangements of the palatal layers. The sticky note model was made a total of 20 times and length of the palate model pre and post Z-plasty was measured. The average length of the palate pre-procedure was 72 mm. The average length of the palate post procedure was 78.9 mm, showing an increase of 6.9 mm (9.6%). Our model provides an accurate and valuable educational tool that will aid in the visualization and understanding of the Furlow palatoplasty procedure. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  5. Figures of Merit Software: Description, User's Guide, Installation Notes, Versions Description, and License Agreement

    Science.gov (United States)

    hoelzer, H. D.; Fourroux, K. A.; Rickman, D. L.; Schrader, C. M.

    2011-01-01

    Figures of Merit (FoMs) and the FoM software provide a method for quantitatively evaluating the quality of a regolith simulant by comparing the simulant to a reference material. FoMs may be used for comparing a simulant to actual regolith material, specification by stating the value a simulant s FoMs must attain to be suitable for a given application and comparing simulants from different vendors or production runs. FoMs may even be used to compare different simulants to each other. A single FoM is conceptually an algorithm that computes a single number for quantifying the similarity or difference of a single characteristic of a simulant material and a reference material and provides a clear measure of how well a simulant and reference material match or compare. FoMs have been constructed to lie between zero and 1, with zero indicating a poor or no match and 1 indicating a perfect match. FoMs are defined for modal composition, particle size distribution, particle shape distribution, (aspect ratio and angularity), and density. This TM covers the mathematics, use, installation, and licensing for the existing FoM code in detail.

  6. A note on antennas: Definitions and methods

    DEFF Research Database (Denmark)

    Bach, Henning

    1987-01-01

    Definitions of scattered and diffracted fields, originally given by R. F. Millar, are reviewed and supplemented. The definitions are used to discuss relations between results obtained by commonly used pattern prediction methods for reflector antennas.......Definitions of scattered and diffracted fields, originally given by R. F. Millar, are reviewed and supplemented. The definitions are used to discuss relations between results obtained by commonly used pattern prediction methods for reflector antennas....

  7. Laparotomy operative note template constructed through a modified Delphi method.

    Science.gov (United States)

    Moore, Lolonya; Churley-Strom, Ruth; Singal, Bonita; O'Leary, Sharon

    2009-05-01

    An operative note is indispensable to physician documentation and decision-making; however, there are no accepted standards for operative note content. Our aim was to use a modified Delphi consensus-building method to construct a uniform operative note template for laparotomy. Using Joint Commission on Accreditation of Healthcare Organizations requirements, literature review, and feedback from 15 medical malpractice defense attorneys, we compiled a draft operative note template of 31 elements. We surveyed 37 Association of Professor of Gynecology and Obstetrics/Solvay scholars asking for their input on inclusion of each item as essential content of the operative note. Two iterations of the survey were required to reach a predetermined 75% level of consensus. Nine elements were eliminated from the template: 6 original and 3 expert-suggested elements. We provide an operative note template that was compiled through a Delphi process.

  8. Modern methods in analytical acoustics lecture notes

    CERN Document Server

    Crighton, D G; Williams, J E Ffowcs; Heckl, M; Leppington, F G

    1992-01-01

    Modern Methods in Analytical Acoustics considers topics fundamental to the understanding of noise, vibration and fluid mechanisms. The series of lectures on which this material is based began by some twenty five years ago and has been developed and expanded ever since. Acknowledged experts in the field have given this course many times in Europe and the USA. Although the scope of the course has widened considerably, the primary aim of teaching analytical techniques of acoustics alongside specific areas of wave motion and unsteady fluid mechanisms remains. The distinguished authors of this volume are drawn from Departments of Acoustics, Engineering of Applied Mathematics in Berlin, Cambridge and London. Their intention is to reach a wider audience of all those concerned with acoustic analysis than has been able to attend the course.

  9. Qualitative Descriptive Methods in Health Science Research.

    Science.gov (United States)

    Colorafi, Karen Jiggins; Evans, Bronwynne

    2016-07-01

    The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

  10. Noted

    Science.gov (United States)

    Nunberg, Geoffrey

    2013-01-01

    Considering how much attention people lavish on the technologies of writing--scroll, codex, print, screen--it's striking how little they pay to the technologies for digesting and regurgitating it. One way or another, there's no sector of the modern world that is not saturated with note-taking--the bureaucracy, the liberal professions, the…

  11. Technical note: New table look-up lossless compression method ...

    African Journals Online (AJOL)

    Technical note: New table look-up lossless compression method based on binary index archiving. ... International Journal of Engineering, Science and Technology ... This paper intends to present a common use archiver, made up following the dictionary technique and using the index archiving method as a simple and ...

  12. New methods of magnet-based instrumentation for NOTES.

    Science.gov (United States)

    Magdeburg, Richard; Hauth, Daniel; Kaehler, Georg

    2013-12-01

    Laparoscopic surgery has displaced open surgery as the standard of care for many clinical conditions. NOTES has been described as the next surgical frontier with the objective of incision-free abdominal surgery. The principal challenge of NOTES procedures is the loss of triangulation and instrument rigidity, which is one of the fundamental concepts of laparoscopic surgery. To overcome these problems necessitates the development of new instrumentation. material and methods: We aimed to assess the use of a very simple combination of internal and external magnets that might allow the vigorous multiaxial traction/counter-traction required in NOTES procedures. The magnet retraction system consisted of an external magnetic assembly and either small internal magnets attached by endoscopic clips to the designated tissue (magnet-clip-approach) or an endoscopic grasping forceps in a magnetic deflector roll (magnet-trocar-approach). We compared both methods regarding precision, time and efficacy by performing transgastric partial uterus resections with better results for the magnet-trocar-approach. This proof-of-principle animal study showed that the combination of external and internal magnets generates sufficient coupling forces at clinically relevant abdominal wall thicknesses, making them suitable for use and evaluation in NOTES procedures, and provides the vigorous multiaxial traction/counter-traction required by the lack of additional abdominal trocars.

  13. Taxonomic notes on some Polyglyptini: descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae

    Directory of Open Access Journals (Sweden)

    Albino M. Sakakibara

    1996-01-01

    Full Text Available Taxonomic notes on some Polyglyptini; descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae. The genera Hemiptycha Germar, Metheisa Fowler, Maturnaria Metcalf, Aphetea Fowler, Dioclophara Kirkaldy, and Phormophora Stål, are redescribed; Creonus, gen.n. (type species: Maturna lloydi Funkhouser, 1914, and Aphetea robustula, sp.n. (from Bolivia, are described. Some nomenclatural changes are introduced, as follow: - Hemiptycha Germar, 1833 = Polyrhyssa Stål, 1869, syn.n.: - Hemiptycha cultrata (Coquebert, 1801, comb.n., = Polyglyptodes flavocostatus Haviland, 1925, syn.n., = Polyrhyssa cultrata maculata Fonseca, 1942, syn.n. - Hemiptycha obtecta (Fabricius, 1803 = Hille herbicola Haviland, 1925, syn.n. - Maturnaria ephippigera (Fairmaire, 1846 = Publilia tumulata Buckton, 1903, syn.n., = Metheisa fowleri Funkhouser, 1927, syn.n. - Creonus lloydi (Funkhouser, 1914, comb.n. - Aphetea parvula (Fabricius, 1803, comb.n., = Aphetea affinis Haviland, 1925, syn.n. - Dioclophara Kirkaldy, 1904 = lncolea Goding, 1926, syn.n. - Dioclophara viridula (Fairmaire, 1846 = Maturna multilineata Fonseca, 1942, syn.n. - Dioclophara variegata (Goding, 1926, comb.n. = lncolea viridis Goding, 1926, syn.n. - Phormophora maura (Fabricius, 1803 = Darnis dorsata Fabricius, 1803, syn.n.

  14. Automated Linguistic Personality Description and Recognition Methods

    Directory of Open Access Journals (Sweden)

    Danylyuk Illya

    2016-12-01

    Full Text Available Background: The relevance of our research, above all, is theoretically motivated by the development of extraordinary scientific and practical interest in the possibilities of language processing of huge amount of data generated by people in everyday professional and personal life in the electronic forms of communication (e-mail, sms, voice, audio and video blogs, social networks, etc.. Purpose: The purpose of the article is to describe the theoretical and practical framework of the project "Communicative-pragmatic and discourse-grammatical lingvopersonology: structuring linguistic identity and computer modeling". The description of key techniques is given, such as machine learning for language modeling, speech synthesis, handwriting simulation. Results: Lingvopersonology developed some great theoretical foundations, its methods, tools, and significant achievements let us predict that the newest promising trend is a linguistic identity modeling by means of information technology, including language. We see three aspects of the modeling: 1 modeling the semantic level of linguistic identity – by means of the use of corpus linguistics; 2 sound level formal modeling of linguistic identity – with the help of speech synthesis; 3 formal graphic level modeling of linguistic identity – with the help of image synthesis (handwriting. For the first case, we suppose to use machine learning technics and vector-space (word2vec algorithm for textual speech modeling. Hybrid CUTE method for personality speech modeling will be applied to the second case. Finally, trained with the person handwriting images neural network can be an instrument for the last case. Discussion: The project "Communicative-pragmatic, discourse, and grammatical lingvopersonology: structuring linguistic identity and computer modeling", which is implementing by the Department of General and Applied Linguistics and Slavonic philology, selected a task to model Yuriy Shevelyov (Sherekh

  15. Notes on Neotropical Eumeninae, with the description of a new species of Pachodynerus de Saussure (Hymenoptera, Vespidae

    Directory of Open Access Journals (Sweden)

    Marcel Gustavo Hermes

    2013-06-01

    Full Text Available Notes on Neotropical Eumeninae, with the description of a new species of Pachodynerus de Saussure (Hymenoptera, Vespidae. Taxonomic information on Neotropical Eumeninae is provided. A new species, Pachodynerus fessatus sp. nov. is described from southeastern São Paulo, Brazil. Additional material of Pachodynerus sericeus (Fox was examined, representing the first further specimens after the original description and including the previously unknown male. The examination of new material of the genus Stenonartonia adds some new distribution records and shows some previously unrecorded individual variation for some species. The males of Stenonartonia guaraya Garcete-Barrett and Stenonartonia rejectoides Garcete-Barrett are described for the first time.

  16. A note on the translation of conceptual data models into description logics: disjointness and covering assumptions

    CSIR Research Space (South Africa)

    Casini, G

    2012-10-01

    Full Text Available possibilities for conceptual data modeling. It also raises the question of how existing conceptual models using ER, UML or ORM could be translated into Description Logics (DLs), a family of logics that have proved to be particularly appropriate for formalizing...

  17. How is adult patient adherence recorded in orthodontists’ clinical notes? A mixed-method case-note study

    Directory of Open Access Journals (Sweden)

    Al Shammary N

    2017-10-01

    Full Text Available Nawaf Al Shammary,1 Koula Asimakopoulou,1 Fraser McDonald,2 Jonathon T Newton,1 Sasha Scambler1 1Division of Population and Patient Health, 2Craniofacial Development and Stem Cell Biology Department, King’s College London Dental Institute, London, UKBackground: Patient adherence in orthodontic treatment is extremely important as it is linked with better treatment outcomes. Despite its importance, however, there is no shared definition of the concept. This makes the recording of adherence-related behaviors in patient notes difficult. The current study explored how, and to what extent adherence is recorded in adult patients’ medical records by orthodontists working in a large National Health Service (NHS London hospital.Materials and methods: A mixed-methods approach was used. A total of 17 clinicians with a mean age of 31 years (SD =4.87 provided N=20 case notes spanning N=324 appointments with patients they judged to be non-adherent. The notes were inspected for evidence of recording of patient adherence using adherence indicators identified in the literature.Results: The term “adherence” did not feature in any notes. The quantitative analysis showed that the three most frequent adherence-related behaviors recorded in notes were “oral hygiene,” “appointment attendance” and “breakages of appliances.” Qualitative analysis not only confirmed these factors but also showed that 1 the clinical aspects of treatment, 2 clinician–patient interaction factors and 3 patient attitudes also featured. This part of the analysis also highlighted inconsistencies across case notes in terms of the amount of information being recorded.Conclusion: Adherence as a term does not feature in the clinical case notes of clinician-identified non-adherent adult patients, while predictors of adherence are recorded with varying degrees of consistency. Keywords: adherence, adults, orthodontic treatment

  18. Description and biological notes of the first species of Xenos (Strepsiptera:Stylopidae) parasitic in Polistes carnifex F. (Hymenoptera:Vespidae) in Mexico

    DEFF Research Database (Denmark)

    Kathirithamby, J.; Hughes, David P.

    2006-01-01

    A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided....

  19. Formal Method of Description Supporting Portfolio Assessment

    Science.gov (United States)

    Morimoto, Yasuhiko; Ueno, Maomi; Kikukawa, Isao; Yokoyama, Setsuo; Miyadera, Youzou

    2006-01-01

    Teachers need to assess learner portfolios in the field of education. However, they need support in the process of designing and practicing what kind of portfolios are to be assessed. To solve the problem, a formal method of describing the relations between the lesson forms and portfolios that need to be collected and the relations between…

  20. Exercise in completing design information questionnaire for model research reactor: model description, notes, questionnaire

    International Nuclear Information System (INIS)

    Bellinger, J.; Ho, T.

    1989-01-01

    The document which defines the inspection measures which the IAEA can deploy at any given nuclear facility is known as the Facility Attachment. For the Agency to negotiate an effective Facility Attachment it must have available certain design information, including the facility's identity, capacity and location; the form, location and flow of nuclear material and the layout of important items of equipment; and a description of the features and procedures relating to nuclear material accountancy, containment and surveillance. In practice such information is solicited in a format, standardized for each facility type, known as the Design Information Questionnaire or the D.I.Q. The nuclear activities used as a model in this course are those of a fictitious country called Pacifica. These nuclear activities bear some resemblance to those at the Australian Atomic Energy Commission's Research Establishment at Lucas Heights. Specifically, Pacifica has a 10 MW heavy water cooled and moderated research reactor using enriched uranium fuel which is very similar to the HIFAR reactor. The reactor and the associated laboratories are described and the Design Information Questionnaire for them is completed. figs., tabs

  1. Taxonomic notes of Hemixantha (Diptera: Richardiidae with description of a new species from the Amazon Region

    Directory of Open Access Journals (Sweden)

    Lisiane Dilli Wentd

    2014-02-01

    Full Text Available Richardiidae is represented by ca. 180 species in 33 genera. A new species of Hemixantha, now totaling 20 species, is described from the Amazon Region, state of Pará, Brazil, and from Teoponte, Bolivia. Hemixantha maculosa sp. nov., H. picta Hennig, 1937 and H. pulchripennis Hendel, 1911 are richardiids known to have an extensively banded wing pattern. Hemixantha maculosa sp. nov. represents the first record of Hemixantha from the state of Pará and this species can be distinguished from H. picta and H. pulchripennis by anepisternum and dorsal half of anepimeron bright yellow and vein R2+3 slightly sinuous. Besides the hyaline areas on the wing of H. maculosa are very distinct from these other species, as follows: (1 subtrapezoidal median area in cell cua1 extended anteriorly to vein M1, separated from hyaline area in cell dm; (2 two oblique areas from costal margin almost to or beyond vein R4+5, one proximal to and one distal to level of crossvein r-m; (3 a circular area on basal part of cell r4+5 and (4 a triangular area on basal region of cell m1. An identification key, diagnoses, description and redescriptions, and illustrations to the species of Hemixantha with an extensively banded wing pattern are provided.

  2. Relative Contributions of Three Descriptive Methods: Implications for Behavioral Assessment

    Science.gov (United States)

    Pence, Sacha T.; Roscoe, Eileen M.; Bourret, Jason C.; Ahearn, William H.

    2009-01-01

    This study compared the outcomes of three descriptive analysis methods--the ABC method, the conditional probability method, and the conditional and background probability method--to each other and to the results obtained from functional analyses. Six individuals who had been diagnosed with developmental delays and exhibited problem behavior…

  3. Tabular method of critical heat flux description in square packing rod bundles

    International Nuclear Information System (INIS)

    Bobkov, V.P.; Smogalev, I.P.

    2003-01-01

    Elaborations of harnessing tabular method for the description and calculation of critical heat fluxes in square packing rod bundles are presented. The tabular method for fuel rod triangular assemblies derived from using basic table for critical heat fluxes in triangular fuel assemblies demonstrates good results. For the harnessing tabular method in square packing rod bundles correction functions reflecting specific geometry were found. Comparative evaluations of calculated values for the critical heat fluxes with experimental ones are presented. Good agreement of calculations with experiments is noted in all range of parameters [ru

  4. 48 CFR 232.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 232.102 Section 232.102 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 232.102 Description of contract financing methods. (e)(2) Progress payments...

  5. 48 CFR 1432.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 1432.102 Section 1432.102 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 1432.102 Description of contract financing methods. Use of progress payments based on a percentage or stage...

  6. 48 CFR 932.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 932.102 Section 932.102 Federal Acquisition Regulations System DEPARTMENT OF ENERGY GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 932.102 Description of contract financing methods. (e)(2) Progress payments based on a percentage or stage of...

  7. 48 CFR 1532.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 1532.102 Section 1532.102 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING General 1532.102 Description of contract financing methods. Progress payments based on a percentage or stage of completion are authorized for use as...

  8. 48 CFR 432.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 432.102 Section 432.102 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 432.102 Description of contract financing methods. Progress payments based on a percentage or stage of completion are...

  9. 48 CFR 32.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 32.102 Section 32.102 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 32.102 Description of contract financing methods. (a) Advance payments are advances of money by the Government to a...

  10. Research note: Grazing-index method procedures of vegetation ...

    African Journals Online (AJOL)

    In the past, veld condition in the Karoo was assessed using the ecological index methods. This recently changed to the graxing-index method on account of the of the differently estimated grazing-index values being used. The principles governing the method of survey remain the same. The method employs ...

  11. Note: A phase synchronization photography method for AC discharge

    Science.gov (United States)

    Wu, Zhicheng; Zhang, Qiaogen; Ma, Jingtan; Pang, Lei

    2018-05-01

    To research discharge physics under AC voltage, a phase synchronization photography method is presented. By using a permanent-magnet synchronous motor to drive a photography mask synchronized with a discharge power supply, discharge images in a specific phase window can be recorded. Some examples of discharges photographed by this method, including the corona discharge in SF6 and the corona discharge along the air/epoxy surface, demonstrate the feasibility of this method. Therefore, this method provides an effective tool for discharge physics researchers.

  12. RESEARCH NOTE A Universal, rapid, and inexpensive method for ...

    Indian Academy of Sciences (India)

    Navya

    success of the extracted gDNA to be submitted into post-PCR analysis. ... The application of the universal method for DNA extraction not restricted into routine ... On the other hand, the universal method has proven its feasibility to be utilized.

  13. Three-dimensional display techniques: description and critique of methods

    International Nuclear Information System (INIS)

    Budinger, T.F.

    1982-01-01

    The recent advances in non invasive medical imaging of 3 dimensional spatial distribution of radionuclides, X-ray attenuation coefficients, and nuclear magnetic resonance parameters necessitate development of a general method for displaying these data. The objective of this paper is to give a systematic description and comparison of known methods for displaying three dimensional data. The discussion of display methods is divided into two major categories: 1) computer-graphics methods which use a two dimensional display screen; and 2) optical methods (such as holography, stereopsis and vari-focal systems)

  14. Research Note A novel method for estimating tree dimensions and ...

    African Journals Online (AJOL)

    The two objects must be adjacent to one another in the photograph. For rapid analysis, multiple photographs of different objects can be taken over a short period of time using the measuring staff. The method is not limited to plants and can be used to determine, for example, browser height, height at which browsers feed, ...

  15. A Note on Symplectic, Multisymplectic Scheme in Finite Element Method

    Institute of Scientific and Technical Information of China (English)

    GUO Han-Ying; JI Xiao-Mei; LI Yu-Qi; WU Ke

    2001-01-01

    We find that with uniform mesh, the numerical schemes derived from finite element method can keep a preserved symplectic structure in one-dimensional case and a preserved multisymplectic structure in two-dimensional case respectively. These results are in fact the intrinsic reason why the numerical experiments show that such finite element algorithms are accurate in practice.``

  16. An Apparent Descriptive Method for Judging the Synchronization of ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    So this method brings certain difficulty for judgement. Hence the author further explores how one can use a great deal of the observational data such as a1,2 sin i, m1,2 sin3 i, K1,2 and f (m) in tables of binary stars to judge synchronization of rotation of binary stars by using apparent phenomenal descriptive methods. These.

  17. A note on the BFV-BRST operator quantization method

    International Nuclear Information System (INIS)

    Dayi, O.F.

    1988-03-01

    The BFV-BRST operator quantization method is applied to massive, abelian (Yang-Mills) theory which has only second class constraints. A nilpotent BFV-BRST-charge is derived and used to define a unitarizing hamiltonian. Unphysical degrees of freedom can be eliminated either in a canonical gauge or in a relativistic one. In the latter gauge this is a general feature (at least locally) of the BFV-BRST quantization of the systems with irreducible constraints. (author). 23 refs

  18. Erratum An Apparent Phenomenal Descriptive Method for Judging ...

    Indian Academy of Sciences (India)

    Li Lin-sen. (J. Astrophys. Astr., (2004) Vol. 25, Nos. 3 & 4, pp. 203–211). Table 1. The calculated results for synchronous parameters of twenty components in ten eclipsing binary systems by using the apparent descriptive method of formula (4). Sp. (V1,2 sin i)M. Name type. P(d) i(deg) R1,2(R⊙). (km/s). Qe,e. PR ≷ P Synch.

  19. Storytelling as an Instructional Method: Descriptions and Research Questions

    Science.gov (United States)

    2009-01-01

    computational brain . Cambridge, MA: Bradford/ MIT Press. Cianciolo, A. T., Prevou, M., Cianciolo, D., & Morris, R. (2007). Using digital storytelling to...volume 3, no. 2 (Fall 2009) 6–23 Storytelling as an Instructional Method: Descriptions and Research Questions Dee H. Andrews, Thomas D. Hull, and...Jennifer A. Donahue Abstract This paper discusses the theoretical and empirical foundations of the use of storytelling in instruction. The defi nition

  20. Descriptive and inferential statistical methods used in burns research.

    Science.gov (United States)

    Al-Benna, Sammy; Al-Ajam, Yazan; Way, Benjamin; Steinstraesser, Lars

    2010-05-01

    Burns research articles utilise a variety of descriptive and inferential methods to present and analyse data. The aim of this study was to determine the descriptive methods (e.g. mean, median, SD, range, etc.) and survey the use of inferential methods (statistical tests) used in articles in the journal Burns. This study defined its population as all original articles published in the journal Burns in 2007. Letters to the editor, brief reports, reviews, and case reports were excluded. Study characteristics, use of descriptive statistics and the number and types of statistical methods employed were evaluated. Of the 51 articles analysed, 11(22%) were randomised controlled trials, 18(35%) were cohort studies, 11(22%) were case control studies and 11(22%) were case series. The study design and objectives were defined in all articles. All articles made use of continuous and descriptive data. Inferential statistics were used in 49(96%) articles. Data dispersion was calculated by standard deviation in 30(59%). Standard error of the mean was quoted in 19(37%). The statistical software product was named in 33(65%). Of the 49 articles that used inferential statistics, the tests were named in 47(96%). The 6 most common tests used (Student's t-test (53%), analysis of variance/co-variance (33%), chi(2) test (27%), Wilcoxon & Mann-Whitney tests (22%), Fisher's exact test (12%)) accounted for the majority (72%) of statistical methods employed. A specified significance level was named in 43(88%) and the exact significance levels were reported in 28(57%). Descriptive analysis and basic statistical techniques account for most of the statistical tests reported. This information should prove useful in deciding which tests should be emphasised in educating burn care professionals. These results highlight the need for burn care professionals to have a sound understanding of basic statistics, which is crucial in interpreting and reporting data. Advice should be sought from professionals

  1. PCR IN TRAUMATOLOGY AND ORTHOPAEDICS: METHOD DESCRIPTION AND APPLICABILITY

    Directory of Open Access Journals (Sweden)

    E. M. Polyakova

    2014-01-01

    Full Text Available Review brief presents description of polymerase chain reaction method (PCR and its most common variants. Three PCR-based lines of research, carried out in the traumatology and orthopaedics, include identifying a causative agents of the implant-associated infection after orthopaedic surgery; detection of antibiotic resistance genes and biofilm forming genes. It was shown that PCR can be used as additional method for detection of genetic disorders, significant for traumatology and orthopaedics, and for investigation of cartilage and bone regeneration.

  2. A New Shape Description Method Using Angular Radial Transform

    Science.gov (United States)

    Lee, Jong-Min; Kim, Whoi-Yul

    Shape is one of the primary low-level image features in content-based image retrieval. In this paper we propose a new shape description method that consists of a rotationally invariant angular radial transform descriptor (IARTD). The IARTD is a feature vector that combines the magnitude and aligned phases of the angular radial transform (ART) coefficients. A phase correction scheme is employed to produce the aligned phase so that the IARTD is invariant to rotation. The distance between two IARTDs is defined by combining differences in the magnitudes and aligned phases. In an experiment using the MPEG-7 shape dataset, the proposed method outperforms existing methods; the average BEP of the proposed method is 57.69%, while the average BEPs of the invariant Zernike moments descriptor and the traditional ART are 41.64% and 36.51%, respectively.

  3. An object-oriented description method of EPMM process

    Science.gov (United States)

    Jiang, Zuo; Yang, Fan

    2017-06-01

    In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

  4. Optical description and design method with annularly stitched aspheric surface.

    Science.gov (United States)

    Cheng, De-Wen; Chen, Xue-Jiao; Xu, Chen; Hu, Yuan; Wang, Yong-Tian

    2015-12-01

    The relentless pressure for designs with new optical functions, small volume, and light weight has greatly increased the importance of aspheric surfaces. In this paper, we propose an annularly stitched aspheric surface (ASAS) description method to increase the freedom and flexibility of imaging system design. The rotationally symmetric ASAS consists of a circular central zone and one or more annular zones. Two neighboring zones are constrained to have the same derivatives on their joint curve, and this means the ASAS is C1 continuous. This finding is proved and verified by the mathematical deduction of the surface formulas. Two optimization strategies and two design methods with the C1 continuous constraints are also discussed. This surface can greatly facilitate the design and even achieve some previously impossible designs without increasing the fabrication difficulty. Two different systems with the proposed ASAS are optimized and the results are presented. The design results verified the practicability of the ASAS.

  5. Notes on the genus Conchapelopia Fittkau (Diptera: Chironomidae: Tanypodinae) from southern China, with description of a new species.

    Science.gov (United States)

    Niitsuma, Hiromi; Tang, Hongqu

    2017-02-22

    Two interesting species, Conchapelopia togamaculosa Sasa & Okazawa and a new species, Conchapelopia brachiata sp. n., were collected from southern China. The male, pupa and larva of the new species are described, and new distributions of the former species are noted. Although the male of the new species is very distinct from that of the former in the hypopygial median volsella, the pupa and larva stunningly resemble those of the former.

  6. Guidance for Methods Descriptions Used in Preclinical Imaging Papers

    Directory of Open Access Journals (Sweden)

    David Stout

    2013-10-01

    Full Text Available Preclinical molecular imaging is a rapidly growing field, where new imaging systems, methods, and biological findings are constantly being developed or discovered. Imaging systems and the associated software usually have multiple options for generating data, which is often overlooked but is essential when reporting the methods used to create and analyze data. Similarly, the ways in which animals are housed, handled, and treated to create physiologically based data must be well described in order that the findings be relevant, useful, and reproducible. There are frequently new developments for metabolic imaging methods. Thus, specific reporting requirements are difficult to establish; however, it remains essential to adequately report how the data have been collected, processed, and analyzed. To assist with future manuscript submissions, this article aims to provide guidelines of what details to report for several of the most common imaging modalities. Examples are provided in an attempt to give comprehensive, succinct descriptions of the essential items to report about the experimental process.

  7. 2D arc-PIC code description: methods and documentation

    CERN Document Server

    Timko, Helga

    2011-01-01

    Vacuum discharges are one of the main limiting factors for future linear collider designs such as that of the Compact LInear Collider. To optimize machine efficiency, maintaining the highest feasible accelerating gradient below a certain breakdown rate is desirable; understanding breakdowns can therefore help us to achieve this goal. As a part of ongoing theoretical research on vacuum discharges at the Helsinki Institute of Physics, the build-up of plasma can be investigated through the particle-in-cell method. For this purpose, we have developed the 2D Arc-PIC code introduced here. We present an exhaustive description of the 2D Arc-PIC code in two parts. In the first part, we introduce the particle-in-cell method in general and detail the techniques used in the code. In the second part, we provide a documentation and derivation of the key equations occurring in the code. The code is original work of the author, written in 2010, and is therefore under the copyright of the author. The development of the code h...

  8. Description of the male of Eburella pinima Martins and notes on the geographical distribution of Eburodacrys aenigma Galileo & Martins and Eburodacrys lanei Zajciw (Coleoptera, Cerambycidae

    Directory of Open Access Journals (Sweden)

    Juan Pablo Botero

    2013-12-01

    Full Text Available Description of the male of Eburella pinima Martins and notes on the geographical distribution of Eburodacrys aenigma Galileo & Martins and Eburodacrys lanei Zajciw (Coleoptera, Cerambycidae. The male of Eburella pinima Martins, 1997 is described and illustrated for the first time. Information on Eburodacrys aenigma Galileo & Martins, 2006, previously known only from the female holotype, which lacked locality label, is herein complemented. This species is recorded from Brazil and the male is depicted for the first time. The geographical distribution of Eburodacrys lanei Zajciw, 1958 is further restricted here as some previous records are confirmed to result from misidentifications of E. aenigma.

  9. Taxonomic notes on Neoperla (Plecoptera: Perlidae) from Sichuan Province of China with the description of two new species.

    Science.gov (United States)

    Li, Weihai; Wang, Ying; Wang, Rongfeng

    2017-01-17

    Species of the perlid genus Neoperla from Sichuan Province, China are reviewed. Two new species are described, Neoperla caii Li & Wang, sp. nov. and N. emeishana Li & Wang, sp. nov. The new species are compared with related congeners. Available types of several known Neoperla species from Sichuan Province were studied and complementary descriptions or brief taxonomic comments are presented for N. bilineata Wu & Claassen, N. chui Wu & Claassen, N. microtumida Wu & Claassen, N. quadrata Wu & Claassen and N. truncata Wu.

  10. Method for measuring the public's appreciation and knowledge of bank notes

    Science.gov (United States)

    de Heij, Hans A. M.

    2002-04-01

    No matter how sophisticated a banknotes' security features are, they are only effective if the public uses them. Surveys conducted by the De Nederlandsche Bank (the Dutch central bank, hereinafter: DNB) in the period 1989-1999 have shown that: the more people like a banknote, the more they know about it, including its security features; there is a positive correlation between the appreciation of a banknote (beautiful or ugly) and the knowledge of its security features, its picture and text elements; hardly anybody from the general public knows more than 4 security features by heart, which is why the number of security features for the public should be confined to a maximum of 4; the average number of security features known to a Dutchman was about 1.7 in 1999; over the years, the awareness of banknote security features gradually increased from 1.03 to 1983 to 1.7 in 1999, as a result of new banknote design and information campaigns. In 1999, DNB conducted its last opinion poll on NLG-notes. After the introduction of the euro banknotes on 1 January 2002, a new era of measurements will start. It is DNB's intention to apply the same method for the euro notes as it is used to for the NLG-notes, as this will permit: A comparison of the results of surveys on Dutch banknotes with those of surveys on the new euro notes (NLG) x (EUR); a comparison between the results of similar surveys conducted in other euro countries: (EUR1)x(EUR2). Furthermore, it will enable third parties to compare their banknote model XXX with the euro: (XXX)x(EUR). This article deals with the survey and the results regarding the NLG- notes and is, moreover, intended as an invitation to use the survey method described.

  11. Homogenized description and retrieval method of nonlinear metasurfaces

    Science.gov (United States)

    Liu, Xiaojun; Larouche, Stéphane; Smith, David R.

    2018-03-01

    A patterned, plasmonic metasurface can strongly scatter incident light, functioning as an extremely low-profile lens, filter, reflector or other optical device. When the metasurface is patterned uniformly, its linear optical properties can be expressed using effective surface electric and magnetic polarizabilities obtained through a homogenization procedure. The homogenized description of a nonlinear metasurface, however, presents challenges both because of the inherent anisotropy of the medium as well as the much larger set of potential wave interactions available, making it challenging to assign effective nonlinear parameters to the otherwise inhomogeneous layer of metamaterial elements. Here we show that a homogenization procedure can be developed to describe nonlinear metasurfaces, which derive their nonlinear response from the enhanced local fields arising within the structured plasmonic elements. With the proposed homogenization procedure, we are able to assign effective nonlinear surface polarization densities to a nonlinear metasurface, and link these densities to the effective nonlinear surface susceptibilities and averaged macroscopic pumping fields across the metasurface. These effective nonlinear surface polarization densities are further linked to macroscopic nonlinear fields through the generalized sheet transition conditions (GSTCs). By inverting the GSTCs, the effective nonlinear surface susceptibilities of the metasurfaces can be solved for, leading to a generalized retrieval method for nonlinear metasurfaces. The application of the homogenization procedure and the GSTCs are demonstrated by retrieving the nonlinear susceptibilities of a SiO2 nonlinear slab. As an example, we investigate a nonlinear metasurface which presents nonlinear magnetoelectric coupling in near infrared regime. The method is expected to apply to any patterned metasurface whose thickness is much smaller than the wavelengths of operation, with inclusions of arbitrary geometry

  12. Description of the female of Navicordulia aemulatrix Pinto & Lamas and additional notes on the male (Odonata: Corduliidae).

    Science.gov (United States)

    Pinto, A P; Lamas, C J E

    2011-01-01

    The female of Navicordulia aemulatrix Pinto & Lamas is described and illustrated for the first time based on a single specimen from the same locality of the type series (state of Santa Catarina, [municipality of São Bento do Sul, 26°14'58"S, 49°22'59"W, railroad station] Rio Vermelho, 29.I.1952, in MZSP). In addition, further morphological notes for the male are provided based on three specimens collected at the type locality and at a new locality in the state of Santa Catarina (Timbó municipality). The pronotal process present in N. aemulatrix is re-evaluated and considered non-homologous to that found in Neocordulia setifera (Hagen in Selys) as previously suggested.

  13. Notes on some sertulariid hydroids (Cnidaria: Hydrozoa from the tropical western Pacific, with descriptions of nine new species

    Directory of Open Access Journals (Sweden)

    Horia R. Galea

    2016-08-01

    Full Text Available Forty-three species of sertulariid hydroids (Cnidaria: Hydrozoa: Sertulariidae, collected from the tropical western Pacific (Taiwan, Philippines, New Caledonia, French Polynesia, Vanuatu, Fiji, Tonga, Solomon Islands during various expeditions of the French Tropical Deep-Sea Benthos program, are discussed. Of these, nine are new to science: Gonaxia nova sp. nov., G. plumularioides sp. nov., Sertularella folliformis sp. nov., Se. plicata sp. nov., Se. pseudocatena sp. nov., Se. splendida sp. nov., Se. tronconica sp. nov., Se. tubulosa sp. nov., and Symplectoscyphus paucicatillus sp. nov. The subspecies Symplectoscyphus johnstoni (Gray, 1843 tropicus Vervoort, 1993 is raised to species but, in order to avoid the secondary homonymy with Sy. tropicus (Hartlaub, 1901, the replacement name, Sy. fasciculatus nom. nov., is introduced. The male and female gonothecae of Diphasia cristata Billard, 1920, the male gonothecae of Gonaxia elegans Vervoort, 1993, as well as the female gonothecae of Salacia macer Vervoort & Watson, 2003, are described for the first time. Additional notes on the morphology of several other species are provided. All taxa are illustrated, in most cases using figures drawn at the same scale, so as to highlight the differences between related species.

  14. Teaching the pharyngeal flap and sphincter pharyngoplasty: The sticky note method.

    Science.gov (United States)

    Lee, Jake J; Jabbour, Noel

    2015-11-01

    To demonstrate a cost-effective, quick, and easily reproducible three-dimensional sticky note model to enhance the understanding and conceptualization of the geometry and steps of the pharyngeal flap and sphincter pharyngoplasty. The method involves making specified incisions and rearrangements of readily available components, including disposable clear plastic cups, yellow and pink sticky notes, and white paper. Once assembly is complete, further incisions and remodeling are performed to simulate a pharyngeal flap or sphincter pharyngoplasty. The cost of the materials to make one model was $0.94. Average construction time was less than 10 min. This three-dimensional model is an efficient, interactive, and simple visual aid to teach surgical trainees the geometry and steps of the pharyngeal flap and sphincter pharyngoplasty. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  15. Writing a technical note.

    Science.gov (United States)

    Ng, K H; Peh, W C G

    2010-02-01

    A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

  16. The first record of Litargus tetraspilotus (Coleoptera, Mycetophagidae in Brazil, with biological notes and complementary description of the species

    Directory of Open Access Journals (Sweden)

    Julianne Milléo

    2011-06-01

    Full Text Available Litargus tetraspilotus LeConte, 1856 was collected feeding on Oidium sp. (Fungi, Ascomycota, Erysiphaceae associated with fruit trees. This is the first time L. tetraspilotus is recorded in Brazil, totaling three species of Mycetophagidae for this country. This study aims to provide a complementary description of this species based on new characters and to present information on its life cycle under laboratory conditions and fluctuation in population in the field. During the period of inventories between July 2004 and August 2006, about every fifteen days, a total of 565 specimens of L. tetraspilotus were collected, with the highest abundance found on citrus plants, with values differing significantly between the two years. The population levels differed between the seasons; spring had the greatest abundance and autumn the least. There was a significant positive correlation of L. tetraspilotus abundance with rainfall and relative humidity. Mycetophagidae, as well as other mycophagous families of Brazilian coleopterans, are barely studied, warranting further future studies of their bioecology and systematics.

  17. Model of Team Organization and Behavior and Team Description Method

    Science.gov (United States)

    1984-10-01

    PERFORMING ORG& REPORT’ NUMBER 7.AUTHIOR(&) 0. CONTRACT OR GRANT NUMOSR(ej J. Thomas Roth Rohn J. Hritz HDA 903-81-C-0198: VEa Donald W. McGill 9...team descriptions are included, acid procedures for data recording are provided. 4q-4 4 iv, G OP S• . . • ,," $1 . . ’ __ _ _ _ ’ / . • , Utilization...Listing of thi! number acid identification of the roles adopted by team members in the actual team structure, along with KOS and primary equipment

  18. Fast methods for long-range interactions in complex systems. Lecture notes

    International Nuclear Information System (INIS)

    Sutmann, Godehard; Gibbon, Paul; Lippert, Thomas

    2011-01-01

    Parallel computing and computer simulations of complex particle systems including charges have an ever increasing impact in a broad range of fields in the physical sciences, e.g. in astrophysics, statistical physics, plasma physics, material sciences, physical chemistry, and biophysics. The present summer school, funded by the German Heraeus-Foundation, took place at the Juelich Supercomputing Centre from 6 - 10 September 2010. The focus was on providing an introduction and overview over different methods, algorithms and new trends for the computational treatment of long-range interactions in particle systems. The Lecture Notes contain an introduction into particle simulation, as well as five different fast methods, i.e. the Fast Multipole Method, Barnes-Hut Tree Method, Multigrid, FFT based methods, and Fast Summation using the non-equidistant FFT. In addition to introducing the methods, efficient parallelization of the methods is presented in detail. This publication was edited at the Juelich Supercomputing Centre (JSC) which is an integral part of the Institute for Advanced Simulation (IAS). The IAS combines the Juelich simulation sciences and the supercomputer facility in one organizational unit. It includes those parts of the scientific institutes at Forschungszentrum Juelich which use simulation on supercomputers as their main research methodology. (orig.)

  19. Fast methods for long-range interactions in complex systems. Lecture notes

    Energy Technology Data Exchange (ETDEWEB)

    Sutmann, Godehard; Gibbon, Paul; Lippert, Thomas (eds.)

    2011-10-13

    Parallel computing and computer simulations of complex particle systems including charges have an ever increasing impact in a broad range of fields in the physical sciences, e.g. in astrophysics, statistical physics, plasma physics, material sciences, physical chemistry, and biophysics. The present summer school, funded by the German Heraeus-Foundation, took place at the Juelich Supercomputing Centre from 6 - 10 September 2010. The focus was on providing an introduction and overview over different methods, algorithms and new trends for the computational treatment of long-range interactions in particle systems. The Lecture Notes contain an introduction into particle simulation, as well as five different fast methods, i.e. the Fast Multipole Method, Barnes-Hut Tree Method, Multigrid, FFT based methods, and Fast Summation using the non-equidistant FFT. In addition to introducing the methods, efficient parallelization of the methods is presented in detail. This publication was edited at the Juelich Supercomputing Centre (JSC) which is an integral part of the Institute for Advanced Simulation (IAS). The IAS combines the Juelich simulation sciences and the supercomputer facility in one organizational unit. It includes those parts of the scientific institutes at Forschungszentrum Juelich which use simulation on supercomputers as their main research methodology. (orig.)

  20. Who Leaves Suicide Notes? An Exploration of Victim Characteristics and Suicide Method of Completed Suicides in Queensland.

    Science.gov (United States)

    Carpenter, Belinda; Bond, Christine; Tait, Gordon; Wilson, Moira; White, Kris

    2016-01-01

    The objective of this study is to address the question: are those who leave suicide notes representative of the larger population of those who commit suicide? The method involves an analysis of a full population of suicides by residents of Queensland, Australia for the full year of 2004, with the information drawn from Coronial files. Our overall results suggest that, and in support of previous research, the population who leaves suicide notes are remarkably similar to those who do not. Differences are identified in four areas: first, and in contrast to prior research, females are less likely to leave a suicide note; second, and in support of previous research, Aboriginal Australians are less likely to leave suicide notes; third, and in support of some previous research, those who use gas as a method of suicide are more likely to leave notes, while those who use a vehicle or a train are less likely to leave notes; finally, our findings lend support to research which finds that those with a diagnosed mental illness are less likely to leave notes. The discussion addresses some of the reasons these disparities may have occurred, and continues the debate over the degree to which suicide notes give insight into the larger suicide population.

  1. Project JADE. Description of the MLH-method

    International Nuclear Information System (INIS)

    Sandstedt, H.; Munier, R.; Wichmann, C.; Isaksson, Therese

    2001-08-01

    This report constitutes a part of a series of reports within project JADE, comparison of deposition methods. A comparison of the deposition methods MLH (Medium Long Holes with approximately 25 copper canisters emplaced in a horizontal deposition hole about 200 metres in length bored between central and side tunnels) and KBS-3 (copper canisters are emplaced in vertical deposition holes bored in the floors of horizontal tunnels) has earlier been performed and KBS-3 was judged to be more advantageous than MLH. However, the prerequisites for the comparison have changed with time and an updated evaluation of MLH was therefore required. In this report, the current knowledge of MLH is summarized with focus on geological prerequisites, methods for boring long, horizontal deposition holes, reinforcement and sealing, deposition and cost. Comparisons with KBS-3 are performed sequentially. An MLH-repository is judged to be more sensitive to ingress of water to the deposition holes during the deposition process. This implies that a MLH repository based on today's knowledge is basically recommended for bedrock with fairly low water baring capacity. It has been demonstrated that MLH has considerable economic potential compared to KBS-3. However, the method is judged to be more technically immature than KBS-3. Particularly, methods and equipment for deposition of canisters need to be developed further. Methods and equipment for deposition can be developed, which fulfill the demands on function and safety, in the near future. MLH cannot therefore be rejected as deposition method

  2. Genetic analysis of bulimia nervosa: methods and sample description.

    Science.gov (United States)

    Kaye, Walter H; Devlin, Bernie; Barbarich, Nicole; Bulik, Cynthia M; Thornton, Laura; Bacanu, Silviu-Alin; Fichter, Manfred M; Halmi, Katherine A; Kaplan, Allan S; Strober, Michael; Woodside, D Blake; Bergen, Andrew W; Crow, Scott; Mitchell, James; Rotondo, Alessandro; Mauri, Mauro; Cassano, Giovanni; Keel, Pamela; Plotnicov, Katherine; Pollice, Christine; Klump, Kelly L; Lilenfeld, Lisa R; Ganjei, J Kelly; Quadflieg, Norbert; Berrettini, Wade H

    2004-05-01

    Twin and family studies suggest that genetic variants contribute to the pathogenesis of bulimia nervosa (BN) and anorexia nervosa (AN). The Price Foundation has supported an international, multisite study of families with these disorders to identify these genetic variations. The current study presents the clinical characteristics of this sample as well as a description of the study methodology. All probands met modified criteria for BN or bulimia nervosa with a history of AN (BAN) as defined in the 4th ed. of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994). All affected relatives met DSM-IV criteria for BN, AN, BAN, or eating disorders not otherwise specified (EDNOS). Probands and affected relatives were assessed diagnostically using both trained-rater and self-report assessments. DNA samples were collected from probands, affected relatives, and available biologic parents. Assessments were obtained from 163 BN probands and 165 BAN probands. Overall, there were 365 relative pairs available for linkage analysis. Of the affected relatives of BN probands, 62 were diagnosed as BN (34.8%), 49 as BAN (27.5%), 35 as AN (19.7%), and 32 as EDNOS (18.0%). For the relatives of BAN probands, 42 were diagnosed as BN (22.5%), 67 as BAN (35.8%), 48 as AN (25.7%), and 30 as EDNOS (16.0%). This study represents the largest genetic study of eating disorders to date. Clinical data indicate that although there are a large number of individuals with BN disorders, a range of eating pathology is represented in the sample, allowing for the examination of several different phenotypes in molecular genetic analyses. Copyright 2004 by Wiley Periodicals, Inc. Int J Eat Disord 35: 556-570, 2004.

  3. Technical note: An inverse method to relate organic carbon reactivity to isotope composition from serial oxidation

    Directory of Open Access Journals (Sweden)

    J. D. Hemingway

    2017-11-01

    Full Text Available Serial oxidation coupled with stable carbon and radiocarbon analysis of sequentially evolved CO2 is a promising method to characterize the relationship between organic carbon (OC chemical composition, source, and residence time in the environment. However, observed decay profiles depend on experimental conditions and oxidation pathway. It is therefore necessary to properly assess serial oxidation kinetics before utilizing decay profiles as a measure of OC reactivity. We present a regularized inverse method to estimate the distribution of OC activation energy (E, a proxy for bond strength, using serial oxidation. Here, we apply this method to ramped temperature pyrolysis or oxidation (RPO analysis but note that this approach is broadly applicable to any serial oxidation technique. RPO analysis directly compares thermal reactivity to isotope composition by determining the E range for OC decaying within each temperature interval over which CO2 is collected. By analyzing a decarbonated test sample at multiple masses and oven ramp rates, we show that OC decay during RPO analysis follows a superposition of parallel first-order kinetics and that resulting E distributions are independent of experimental conditions. We therefore propose the E distribution as a novel proxy to describe OC thermal reactivity and suggest that E vs. isotope relationships can provide new insight into the compositional controls on OC source and residence time.

  4. Technical note: An inverse method to relate organic carbon reactivity to isotope composition from serial oxidation

    Science.gov (United States)

    Hemingway, Jordon D.; Rothman, Daniel H.; Rosengard, Sarah Z.; Galy, Valier V.

    2017-11-01

    Serial oxidation coupled with stable carbon and radiocarbon analysis of sequentially evolved CO2 is a promising method to characterize the relationship between organic carbon (OC) chemical composition, source, and residence time in the environment. However, observed decay profiles depend on experimental conditions and oxidation pathway. It is therefore necessary to properly assess serial oxidation kinetics before utilizing decay profiles as a measure of OC reactivity. We present a regularized inverse method to estimate the distribution of OC activation energy (E), a proxy for bond strength, using serial oxidation. Here, we apply this method to ramped temperature pyrolysis or oxidation (RPO) analysis but note that this approach is broadly applicable to any serial oxidation technique. RPO analysis directly compares thermal reactivity to isotope composition by determining the E range for OC decaying within each temperature interval over which CO2 is collected. By analyzing a decarbonated test sample at multiple masses and oven ramp rates, we show that OC decay during RPO analysis follows a superposition of parallel first-order kinetics and that resulting E distributions are independent of experimental conditions. We therefore propose the E distribution as a novel proxy to describe OC thermal reactivity and suggest that E vs. isotope relationships can provide new insight into the compositional controls on OC source and residence time.

  5. Note: A new method for directly reducing the sampling jitter noise of the digital phasemeter

    Science.gov (United States)

    Liang, Yu-Rong

    2018-03-01

    The sampling jitter noise is one non-negligible noise source of the digital phasemeter used for space gravitational wave detection missions. This note provides a new method for directly reducing the sampling jitter noise of the digital phasemeter, by adding a dedicated signal of which the frequency, amplitude, and initial phase should be pre-set. In contrast to the phase correction using the pilot-tone in the work of Burnett, Gerberding et al., Liang et al., Ales et al., Gerberding et al., and Ware et al. [M.Sc. thesis, Luleå University of Technology, 2010; Classical Quantum Gravity 30, 235029 (2013); Rev. Sci. Instrum. 86, 016106 (2015); Rev. Sci. Instrum. 86, 084502 (2015); Rev. Sci. Instrum. 86, 074501 (2015); and Proceedings of the Earth Science Technology Conference (NASA, USA, 2006)], the new method is intrinsically additive noise suppression. The experiment results validate that the new method directly reduces the sampling jitter noise without data post-processing and provides the same phase measurement noise level (10-6 rad/Hz1/2 at 0.1 Hz) as the pilot-tone correction.

  6. Stress description model by non destructive magnetic methods

    International Nuclear Information System (INIS)

    Flambard, C.; Grossiord, J.L.; Tourrenc, P.

    1983-01-01

    Since a few years, CETIM investigates analysis possibilities of materials, by developing a method founded on observation of ferromagnetic noise. By experiments, correlations have become obvious between state of the material and recorded signal. These correlations open to industrial applications to measure stresses and strains in elastic and plastic ranges. This article starts with a brief historical account and theoretical backgrounds of the method. The experimental frame of this research is described, and the main results are analyzed. Theoretically, a model was built up, and we present it. It seems in agreement with some experimental observations. The main results concerning stress application, thermal and surface treatments (decarbonizing) are presented [fr

  7. Multiple predictor smoothing methods for sensitivity analysis: Description of techniques

    International Nuclear Information System (INIS)

    Storlie, Curtis B.; Helton, Jon C.

    2008-01-01

    The use of multiple predictor smoothing methods in sampling-based sensitivity analyses of complex models is investigated. Specifically, sensitivity analysis procedures based on smoothing methods employing the stepwise application of the following nonparametric regression techniques are described: (i) locally weighted regression (LOESS), (ii) additive models, (iii) projection pursuit regression, and (iv) recursive partitioning regression. Then, in the second and concluding part of this presentation, the indicated procedures are illustrated with both simple test problems and results from a performance assessment for a radioactive waste disposal facility (i.e., the Waste Isolation Pilot Plant). As shown by the example illustrations, the use of smoothing procedures based on nonparametric regression techniques can yield more informative sensitivity analysis results than can be obtained with more traditional sensitivity analysis procedures based on linear regression, rank regression or quadratic regression when nonlinear relationships between model inputs and model predictions are present

  8. Gastrin radioimmunoassay. Description and application of a novel method

    International Nuclear Information System (INIS)

    Nemeth, J.; Jakab, B.; Schweibert, I.; Szolcsanyi, J.; Oroszi, G.; Szilvassy, Z.

    2002-01-01

    Development and application of a novel gastrin radioimmunoassay (RIA) are described. 125 I-labeling of non-sulphated human gastrin-17 (nshG-17) was performed by the iodogen method and the mono-iodinated hormone, as RIA tracer, was separated by reversed-phase high performance liquid chromatography (HPLC). Serum gastrin levels were measured in response to intravenous application of isoproterenol, a non-selective beta and phenylephrine, a selective alpha-1 receptor agonist using a newly developed method specific for the C-terminal part of the hormone in rats. Isoproterenol at clinically relevant doses elicited a significant increase in serum gastrin concentration in a dose-dependent fashion, whereas phenylephrine was without effect. (author)

  9. Description of a method for computing fluid-structure interaction

    International Nuclear Information System (INIS)

    Gantenbein, F.

    1982-02-01

    A general formulation allowing computation of structure vibrations in a dense fluid is described. It is based on fluid modelisation by fluid finite elements. For each fluid node are associated two variables: the pressure p and a variable π defined as p=d 2 π/dt 2 . Coupling between structure and fluid is introduced by surface elements. This method is easy to introduce in a general finite element code. Validation was obtained by analytical calculus and tests. It is widely used for vibrational and seismic studies of pipes and internals of nuclear reactors some applications are presented [fr

  10. Implicit Methods for the Magnetohydrodynamic Description of Magnetically Confined Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Jardin, S C

    2010-09-28

    Implicit algorithms are essential for predicting the slow growth and saturation of global instabilities in today’s magnetically confined fusion plasma experiments. Present day algorithms for obtaining implicit solutions to the magnetohydrodynamic (MHD) equations for highly magnetized plasma have their roots in algorithms used in the 1960s and 1970s. However, today’s computers and modern linear and non-linear solver techniques make practical much more comprehensive implicit algorithms than were previously possible. Combining these advanced implicit algorithms with highly accurate spatial representations of the vector fields describing the plasma flow and magnetic fields and with improved methods of calculating anisotropic thermal conduction now makes possible simulations of fusion experiments using realistic values of plasma parameters and actual configuration geometry.

  11. Implicit Methods for the Magnetohydrodynamic Description of Magnetically Confined Plasmas

    International Nuclear Information System (INIS)

    Jardin, S.C.

    2010-01-01

    Implicit algorithms are essential for predicting the slow growth and saturation of global instabilities in today's magnetically confined fusion plasma experiments. Present day algorithms for obtaining implicit solutions to the magnetohydrodynamic (MHD) equations for highly magnetized plasma have their roots in algorithms used in the 1960s and 1970s. However, today's computers and modern linear and non-linear solver techniques make practical much more comprehensive implicit algorithms than were previously possible. Combining these advanced implicit algorithms with highly accurate spatial representations of the vector fields describing the plasma flow and magnetic fields and with improved methods of calculating anisotropic thermal conduction now makes possible simulations of fusion experiments using realistic values of plasma parameters and actual configuration geometry.

  12. Descriptive study of the Socratic method: evidence for verbal shaping.

    Science.gov (United States)

    Calero-Elvira, Ana; Froján-Parga, María Xesús; Ruiz-Sancho, Elena María; Alpañés-Freitag, Manuel

    2013-12-01

    In this study we analyzed 65 fragments of session recordings in which a cognitive behavioral therapist employed the Socratic method with her patients. Specialized coding instruments were used to categorize the verbal behavior of the psychologist and the patients. First the fragments were classified as more or less successful depending on the overall degree of concordance between the patient's verbal behavior and the therapeutic objectives. Then the fragments were submitted to sequential analysis so as to discover regularities linking the patient's verbal behavior and the therapist's responses to it. Important differences between the more and the less successful fragments involved the therapist's approval or disapproval of verbalizations that approximated therapeutic goals. These approvals and disapprovals were associated with increases and decreases, respectively, in the patient's behavior. These results are consistent with the existence, in this particular case, of a process of shaping through which the therapist modifies the patient's verbal behavior in the overall direction of his or her chosen therapeutic objectives. © 2013.

  13. Using voice to create hospital progress notes: Description of a mobile application and supporting system integrated with a commercial electronic health record.

    Science.gov (United States)

    Payne, Thomas H; Alonso, W David; Markiel, J Andrew; Lybarger, Kevin; White, Andrew A

    2018-01-01

    We describe the development and design of a smartphone app-based system to create inpatient progress notes using voice, commercial automatic speech recognition software, with text processing to recognize spoken voice commands and format the note, and integration with a commercial EHR. This new system fits hospital rounding workflow and was used to support a randomized clinical trial testing whether use of voice to create notes improves timeliness of note availability, note quality, and physician satisfaction with the note creation process. The system was used to create 709 notes which were placed in the corresponding patient's EHR record. The median time from pressing the Send button to appearance of the formatted note in the Inbox was 8.8 min. It was generally very reliable, accepted by physician users, and secure. This approach provides an alternative to use of keyboard and templates to create progress notes and may appeal to physicians who prefer voice to typing. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. An Efficient Explicit-time Description Method for Timed Model Checking

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2009-12-01

    Full Text Available Timed model checking, the method to formally verify real-time systems, is attracting increasing attention from both the model checking community and the real-time community. Explicit-time description methods verify real-time systems using general model constructs found in standard un-timed model checkers. Lamport proposed an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables to model time requirements. Two methods, the Sync-based Explicit-time Description Method using rendezvous synchronization steps and the Semaphore-based Explicit-time Description Method using only one global variable were proposed; they both achieve better modularity than Lamport's method in modeling the real-time systems. In contrast to timed automata based model checkers like UPPAAL, explicit-time description methods can access and store the current time instant for future calculations necessary for many real-time systems, especially those with pre-emptive scheduling. However, the Tick process in the above three methods increments the time by one unit in each tick; the state spaces therefore grow relatively fast as the time parameters increase, a problem when the system's time period is relatively long. In this paper, we propose a more efficient method which enables the Tick process to leap multiple time units in one tick. Preliminary experimental results in a high performance computing environment show that this new method significantly reduces the state space and improves both the time and memory efficiency.

  15. Verifying Real-Time Systems using Explicit-time Description Methods

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2009-12-01

    Full Text Available Timed model checking has been extensively researched in recent years. Many new formalisms with time extensions and tools based on them have been presented. On the other hand, Explicit-Time Description Methods aim to verify real-time systems with general untimed model checkers. Lamport presented an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables for time requirements. This paper proposes a new explicit-time description method with no reliance on global variables. Instead, it uses rendezvous synchronization steps between the Tick process and each system process to simulate time. This new method achieves better modularity and facilitates usage of more complex timing constraints. The two explicit-time description methods are implemented in DIVINE, a well-known distributed-memory model checker. Preliminary experiment results show that our new method, with better modularity, is comparable to Lamport's method with respect to time and memory efficiency.

  16. FURNACE; a toroidal geometry neutronic program system method description and users manual

    International Nuclear Information System (INIS)

    Verschuur, K.A.

    1984-12-01

    The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

  17. A Method for Transforming Existing Web Service Descriptions into an Enhanced Semantic Web Service Framework

    Science.gov (United States)

    Du, Xiaofeng; Song, William; Munro, Malcolm

    Web Services as a new distributed system technology has been widely adopted by industries in the areas, such as enterprise application integration (EAI), business process management (BPM), and virtual organisation (VO). However, lack of semantics in the current Web Service standards has been a major barrier in service discovery and composition. In this chapter, we propose an enhanced context-based semantic service description framework (CbSSDF+) that tackles the problem and improves the flexibility of service discovery and the correctness of generated composite services. We also provide an agile transformation method to demonstrate how the various formats of Web Service descriptions on the Web can be managed and renovated step by step into CbSSDF+ based service description without large amount of engineering work. At the end of the chapter, we evaluate the applicability of the transformation method and the effectiveness of CbSSDF+ through a series of experiments.

  18. Description of symmetry of magnetic structures by representations of space groups. [Tables, projecton operator methods

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W

    1974-10-15

    A description of magnetic structures based on the use of representations of space groups is given. Representations of the space groups were established for each compound on the basis of experimental data by the method of projection operators. The compounds contained in the list are collected according to crystal systems, alphabetically within each system. The description of each compound consists of the four parts. The first part contain the chemical symbol of the compound, the second its space group. The next part contains the chemical symbol of the magnetic atom and its positions in Wychoff notation with the number of equivalent positions in the crystal unit cell. The main description of a compound magnetic structure is given in the fourth part. It contains: K vector defined in the reciprocal space, the representation according to which a magnetic structure is transformed and the axial vector function S which describes the magnetic structure.

  19. Sleep Spindles as an Electrographic Element: Description and Automatic Detection Methods

    Directory of Open Access Journals (Sweden)

    Dorothée Coppieters ’t Wallant

    2016-01-01

    Full Text Available Sleep spindle is a peculiar oscillatory brain pattern which has been associated with a number of sleep (isolation from exteroceptive stimuli, memory consolidation and individual characteristics (intellectual quotient. Oddly enough, the definition of a spindle is both incomplete and restrictive. In consequence, there is no consensus about how to detect spindles. Visual scoring is cumbersome and user dependent. To analyze spindle activity in a more robust way, automatic sleep spindle detection methods are essential. Various algorithms were developed, depending on individual research interest, which hampers direct comparisons and meta-analyses. In this review, sleep spindle is first defined physically and topographically. From this general description, we tentatively extract the main characteristics to be detected and analyzed. A nonexhaustive list of automatic spindle detection methods is provided along with a description of their main processing principles. Finally, we propose a technique to assess the detection methods in a robust and comparable way.

  20. THE USE OF PAIR COMPOSITION METHOD ON STUDENTS’ DESCRIPTIVE WRITING SKILL

    Directory of Open Access Journals (Sweden)

    Maya Nurmayanti

    2014-06-01

    Full Text Available This research was aimed to find out roles of pair composition method on students’ behaviour in learning processes and their writing assessment, and also to find out students’ attitude toward learning process of pair composition method in writing descriptive text in the classroom. Descriptive qualitative method was used in this research. The participants were 33 students of X grade of Senior High School. The data were collected from observation, the result of analysis showed that 66% of the seriousness of students during learning process was high, 78% of enthusiasm of students in doing task was high, and 58% of students’ participation was high. The increasing of students’ assessment was 18,7 from the average score before. The data collected from interview and questionnaire indicated that pair composition method provided the opportunities for sharing ideas, developing text, corresting writing errors, motivating students being active, and 50% students strongly agreed that pair composition method on writing descriptive text was lively and enjoyable.

  1. The analogy method for the description of external characteristic of inner combustion engines

    Directory of Open Access Journals (Sweden)

    A. Stonys

    2004-10-01

    Full Text Available The original data for the evaluation of vehicle motion dynamics is external characteristic of its engine, which consists of three parameters: torque, power and specific fuel consumption. It is very important to have the dependences of these characteristics on revs for various engine load cases, creating a vehicle model under real motion conditions. Load cases are defined by a load coefficient. Car-makers usually don’t declare full engine external characteristics, which overtake all load coefficient variation interval. The purpose of this article is to research, how to get full description of engine torque function without its full data. The analogy method, which is used in polymers and composites mechanics, was employed for the description of a torque function. The method is based on the creation of summarized characteristic, making horizontal and vertical shifts of torque dependences. From the curve it is possible to get a proper characteristic at a chosen load coefficient.

  2. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods

    Directory of Open Access Journals (Sweden)

    Groza Tudor

    2012-10-01

    Full Text Available Abstract Background Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. Results We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting. The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. Conclusions The performance of the initial segmentation of anatomical entities and qualities (phase I is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  3. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods.

    Science.gov (United States)

    Groza, Tudor; Hunter, Jane; Zankl, Andreas

    2012-10-15

    Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting). The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. The performance of the initial segmentation of anatomical entities and qualities (phase I) is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  4. Research Notes Use of the dry-weight-rank method of botanical ...

    African Journals Online (AJOL)

    When used in combination with the double sampling (or comparative yield) method of yield estimation, the dry-weight-rank method of botanical analysis provides a rapid non-destructive means of estimating botanical composition. The composition is expressed in terms of the contribution of individual species to total herbage ...

  5. Description of a new species of Apterotoxitiades Adlbauer, 2008 (Cerambycidae, Dorcasominae, Apatophyseini and the female of A. vivesi Adlbauer, 2008, with notes on the biology of the genus

    Directory of Open Access Journals (Sweden)

    Karl Adlbauer

    2015-02-01

    Full Text Available Following the description of the Apatophyseini genus Apterotoxitiades Adlbauer, 2008 (Cerambycidae: Dorcasominae from South Africa, a new species has now been discovered in the eastern Drakensberg range of the country. The holotype female is here described as A. aspinosus Björnstad, sp. n. Also, a new small series collected at Hogsback, in the Amathole range, has allowed the description of the previously unknown female of the type species, A. vivesi Adlbauer, 2008. Both species are high altitude dwellers, occurring above 1300 m asl and their habitat consists mainly of mountain grassland interspersed with mistbelt forest pockets. All specimens were recorded in the austral winter to early spring, when these mountain ranges are occasionally covered in snow and night temperature plummet below 0 °C. They appear to be nocturnal and their complete lack of wings indicates a remarkable adaptation to cold conditions at high altitude.

  6. Understanding common statistical methods, Part I: descriptive methods, probability, and continuous data.

    Science.gov (United States)

    Skinner, Carl G; Patel, Manish M; Thomas, Jerry D; Miller, Michael A

    2011-01-01

    Statistical methods are pervasive in medical research and general medical literature. Understanding general statistical concepts will enhance our ability to critically appraise the current literature and ultimately improve the delivery of patient care. This article intends to provide an overview of the common statistical methods relevant to medicine.

  7. From Matched Spatial Filtering towards the Fused Statistical Descriptive Regularization Method for Enhanced Radar Imaging

    Directory of Open Access Journals (Sweden)

    Shkvarko Yuriy

    2006-01-01

    Full Text Available We address a new approach to solve the ill-posed nonlinear inverse problem of high-resolution numerical reconstruction of the spatial spectrum pattern (SSP of the backscattered wavefield sources distributed over the remotely sensed scene. An array or synthesized array radar (SAR that employs digital data signal processing is considered. By exploiting the idea of combining the statistical minimum risk estimation paradigm with numerical descriptive regularization techniques, we address a new fused statistical descriptive regularization (SDR strategy for enhanced radar imaging. Pursuing such an approach, we establish a family of the SDR-related SSP estimators, that encompass a manifold of existing beamforming techniques ranging from traditional matched filter to robust and adaptive spatial filtering, and minimum variance methods.

  8. Technical Note: Regularization performances with the error consistency method in the case of retrieved atmospheric profiles

    Directory of Open Access Journals (Sweden)

    S. Ceccherini

    2007-01-01

    Full Text Available The retrieval of concentration vertical profiles of atmospheric constituents from spectroscopic measurements is often an ill-conditioned problem and regularization methods are frequently used to improve its stability. Recently a new method, that provides a good compromise between precision and vertical resolution, was proposed to determine analytically the value of the regularization parameter. This method is applied for the first time to real measurements with its implementation in the operational retrieval code of the satellite limb-emission measurements of the MIPAS instrument and its performances are quantitatively analyzed. The adopted regularization improves the stability of the retrieval providing smooth profiles without major degradation of the vertical resolution. In the analyzed measurements the retrieval procedure provides a vertical resolution that, in the troposphere and low stratosphere, is smaller than the vertical field of view of the instrument.

  9. Note: A simple image processing based fiducial auto-alignment method for sample registration.

    Science.gov (United States)

    Robertson, Wesley D; Porto, Lucas R; Ip, Candice J X; Nantel, Megan K T; Tellkamp, Friedjof; Lu, Yinfei; Miller, R J Dwayne

    2015-08-01

    A simple method for the location and auto-alignment of sample fiducials for sample registration using widely available MATLAB/LabVIEW software is demonstrated. The method is robust, easily implemented, and applicable to a wide variety of experiment types for improved reproducibility and increased setup speed. The software uses image processing to locate and measure the diameter and center point of circular fiducials for distance self-calibration and iterative alignment and can be used with most imaging systems. The method is demonstrated to be fast and reliable in locating and aligning sample fiducials, provided here by a nanofabricated array, with accuracy within the optical resolution of the imaging system. The software was further demonstrated to register, load, and sample the dynamically wetted array.

  10. Note on a simple test method for estimaing J/sub Ic/

    International Nuclear Information System (INIS)

    Whipple, T.A.; McHenry, H.I.

    1980-01-01

    Fracture toughness testing is generally a time-consuming and expensive procedure; therefore, there has been a significant amount of effort directed toward developing an inexpensive and rapid method of estimating the fracture toughness of materials. In this paper, a simple method for estimating J/sub Ic/ through the use of small, notched, bend bars is evaluated. The test only involves the measurement of the energy necessary to fracture the sample. Initial tests on Fe-18Cr-3Ni-13Mn and 304L stainless steel at 76 and 4 0 K have yielded results consistent with other fracture toughness tests, for materials in the low- to medium-toughness range

  11. Note: Non-invasive optical method for rapid determination of alignment degree of oriented nanofibrous layers

    Energy Technology Data Exchange (ETDEWEB)

    Pokorny, M.; Rebicek, J. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); Klemes, J. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Kotzianova, A. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, CZ-62500 Brno (Czech Republic); Velebny, V. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic)

    2015-10-15

    This paper presents a rapid non-destructive method that provides information on the anisotropic internal structure of nanofibrous layers. A laser beam of a wavelength of 632.8 nm is directed at and passes through a nanofibrous layer prepared by electrostatic spinning. Information about the structural arrangement of nanofibers in the layer is directly visible in the form of a diffraction image formed on a projection screen or obtained from measured intensities of the laser beam passing through the sample which are determined by the dependency of the angle of the main direction of polarization of the laser beam on the axis of alignment of nanofibers in the sample. Both optical methods were verified on Polyvinyl alcohol (PVA) nanofibrous layers (fiber diameter of 470 nm) with random, single-axis aligned and crossed structures. The obtained results match the results of commonly used methods which apply the analysis of electron microscope images. The presented simple method not only allows samples to be analysed much more rapidly and without damaging them but it also makes possible the analysis of much larger areas, up to several square millimetres, at the same time.

  12. Note: Non-invasive optical method for rapid determination of alignment degree of oriented nanofibrous layers

    International Nuclear Information System (INIS)

    Pokorny, M.; Rebicek, J.; Klemes, J.; Kotzianova, A.; Velebny, V.

    2015-01-01

    This paper presents a rapid non-destructive method that provides information on the anisotropic internal structure of nanofibrous layers. A laser beam of a wavelength of 632.8 nm is directed at and passes through a nanofibrous layer prepared by electrostatic spinning. Information about the structural arrangement of nanofibers in the layer is directly visible in the form of a diffraction image formed on a projection screen or obtained from measured intensities of the laser beam passing through the sample which are determined by the dependency of the angle of the main direction of polarization of the laser beam on the axis of alignment of nanofibers in the sample. Both optical methods were verified on Polyvinyl alcohol (PVA) nanofibrous layers (fiber diameter of 470 nm) with random, single-axis aligned and crossed structures. The obtained results match the results of commonly used methods which apply the analysis of electron microscope images. The presented simple method not only allows samples to be analysed much more rapidly and without damaging them but it also makes possible the analysis of much larger areas, up to several square millimetres, at the same time

  13. A note on the Lattice Boltzmann Method Beyond the Chapman Enskog Limits

    NARCIS (Netherlands)

    Sbragaglia, M.; Succi, S.

    2006-01-01

    A non-perturbative analysis of the Bhatnagar-Gross-Krook (BGK) model kinetic equation for finite values of the Knudsen number is presented. This analysis indicates why discrete kinetic versions of the BGK equation, and notably the lattice Boltzmann method, can provide semi-quantitative results also

  14. Technical note: A new method for the determination of water quality ...

    African Journals Online (AJOL)

    The aim of this study was to develop and test a novel screening method for determining water quality. We hypothesised that L-ascorbic acid would be a good indicator of water quality, due to its sensitivity to pollutants. We investigated the absorption spectra of L‑ascorbic acid dissolved at different concentrations in water from ...

  15. Assessment of Resampling Methods for Causality Testing: A note on the US Inflation Behavior

    NARCIS (Netherlands)

    Papana, A.; Kyrtsou, C.; Kugiumtzis, D.; Diks, C.

    2017-01-01

    Different resampling methods for the null hypothesis of no Granger causality are assessed in the setting of multivariate time series, taking into account that the driving-response coupling is conditioned on the other observed variables. As appropriate test statistic for this setting, the partial

  16. A note on the convergence of the Zakharov-Kuznetsov equation by homotopy analysis method

    Directory of Open Access Journals (Sweden)

    Amir Fallahzadeh

    2014-07-01

    Full Text Available In this paper, the convergence of Zakharov-Kuznetsov (ZK equation by homotopy analysis method (HAM is investigated. A theorem is proved to guarantee the convergence of HAMand to find the series solution of this equation via a reliable algorithm.

  17. Descriptions of two new species and one new subspecies from the Exocelina okbapensis-group, and notes on the E. aipo-group (Coleoptera, Dytiscidae, Copelatinae

    Directory of Open Access Journals (Sweden)

    Helena Shaverdo

    2017-11-01

    Full Text Available Two new species and one new subspecies of Exocelina Broun, 1886 from New Guinea are described: E. okbapensis Shaverdo & Balke, sp. n., E. okbapensis hajeki Shaverdo & Balke, ssp. n., and E. may Shaverdo & Balke, sp. n. These and two already described species are assigned to the E. okbapensis-group, which is morphologically (based on setation of the paramere and phylogenetically close to the E. aipo-group. On the latter, morphological and taxonomic notes are provided. An identification key to all known species of the groups is presented, and important diagnostic characters are illustrated. Data on the species distributions are mapped and show that the species occur only in the central mountain part of the island restricted by Wamena in the west and Sandaun Province in the east.

  18. Revision of Bondariella Hustache & Bondar (Coleoptera: Curculionidae), with descriptions of the first species from the Amazon and notes on natural history.

    Science.gov (United States)

    Valente, Roberta De Melo; Cordeiro Júnior, Mariano Brandão

    2015-09-15

    Bondariella Hustache & Bondar, 1942 is revised. In addition to the redescription of the genus and its four previously known species, we report and describe the first species from the Amazonian region: Bondariella rudicula sp. nov. and Bondariella crenata sp. nov. We also provide a key to the species, illustrations and notes on natural history. All six species of Bondariella have been collected on palm flowers from Brazil, with the previously known species having only been recorded from species of Syagrus Mart. from the Atlantic Forest and Caatinga biomes. The two new species have only been recorded from species of Euterpe Mart. from the Amazon biome. Future work may prove if the associations with Syagrus and Euterpe are specific to the biomes.

  19. Description of the last nymphal instar of Talipes appendiculatus (Hemiptera: Membracidae: Membracinae, and notes on the biology of the immatures and adults

    Directory of Open Access Journals (Sweden)

    Frederico Lencioni-Neto

    Full Text Available ABSTRACT The last instar nymph of Talipes appendiculatus (Fonseca is described and illustrated, and biological data are given on the immatures and adults. The 5th instar nymph has the body covered with tuberculate chalazae; head and thorax without scoli; abdomen with terga III-VIII with single dorsal scoli, all different in size, III and VIII small, V the largest about 2x longer than wide. Descriptions of the adults (male and female are also provided, with the addition of some new characters. The species (adults, immatures of various stages has been collected on branches of Cassia fistula L. (Leguminosae: Caesalpinioidea, and is frequently attended by bees and wasps.

  20. Note: Photopyroelectric measurement of thermal effusivity of transparent liquids by a method free of fitting procedures

    Science.gov (United States)

    Ivanov, R.; Marín, E.; Villa, J.; Hernández Aguilar, C.; Domínguez Pacheco, A.; Hernández Garrido, S.

    2016-02-01

    In a recent paper published in this journal [R. Ivanov et al., Rev. Sci. Instrum. 86, 064902 (2015)], a methodology free of fitting procedures for determining the thermal effusivity of liquids using the electropyroelectric technique was reported. Here the same measurement principle is extended to the well-known photopyroelectric technique. The theoretical basis and experimental basis of the method are presented and its usefulness is demonstrated with measurements on test samples.

  1. Assessment of resampling methods for causality testing: A note on the US inflation behavior

    Science.gov (United States)

    Kyrtsou, Catherine; Kugiumtzis, Dimitris; Diks, Cees

    2017-01-01

    Different resampling methods for the null hypothesis of no Granger causality are assessed in the setting of multivariate time series, taking into account that the driving-response coupling is conditioned on the other observed variables. As appropriate test statistic for this setting, the partial transfer entropy (PTE), an information and model-free measure, is used. Two resampling techniques, time-shifted surrogates and the stationary bootstrap, are combined with three independence settings (giving a total of six resampling methods), all approximating the null hypothesis of no Granger causality. In these three settings, the level of dependence is changed, while the conditioning variables remain intact. The empirical null distribution of the PTE, as the surrogate and bootstrapped time series become more independent, is examined along with the size and power of the respective tests. Additionally, we consider a seventh resampling method by contemporaneously resampling the driving and the response time series using the stationary bootstrap. Although this case does not comply with the no causality hypothesis, one can obtain an accurate sampling distribution for the mean of the test statistic since its value is zero under H0. Results indicate that as the resampling setting gets more independent, the test becomes more conservative. Finally, we conclude with a real application. More specifically, we investigate the causal links among the growth rates for the US CPI, money supply and crude oil. Based on the PTE and the seven resampling methods, we consistently find that changes in crude oil cause inflation conditioning on money supply in the post-1986 period. However this relationship cannot be explained on the basis of traditional cost-push mechanisms. PMID:28708870

  2. Assessment of resampling methods for causality testing: A note on the US inflation behavior.

    Science.gov (United States)

    Papana, Angeliki; Kyrtsou, Catherine; Kugiumtzis, Dimitris; Diks, Cees

    2017-01-01

    Different resampling methods for the null hypothesis of no Granger causality are assessed in the setting of multivariate time series, taking into account that the driving-response coupling is conditioned on the other observed variables. As appropriate test statistic for this setting, the partial transfer entropy (PTE), an information and model-free measure, is used. Two resampling techniques, time-shifted surrogates and the stationary bootstrap, are combined with three independence settings (giving a total of six resampling methods), all approximating the null hypothesis of no Granger causality. In these three settings, the level of dependence is changed, while the conditioning variables remain intact. The empirical null distribution of the PTE, as the surrogate and bootstrapped time series become more independent, is examined along with the size and power of the respective tests. Additionally, we consider a seventh resampling method by contemporaneously resampling the driving and the response time series using the stationary bootstrap. Although this case does not comply with the no causality hypothesis, one can obtain an accurate sampling distribution for the mean of the test statistic since its value is zero under H0. Results indicate that as the resampling setting gets more independent, the test becomes more conservative. Finally, we conclude with a real application. More specifically, we investigate the causal links among the growth rates for the US CPI, money supply and crude oil. Based on the PTE and the seven resampling methods, we consistently find that changes in crude oil cause inflation conditioning on money supply in the post-1986 period. However this relationship cannot be explained on the basis of traditional cost-push mechanisms.

  3. A NOTE ON METHODS FOR THE ESTIMATION OF THE AIRBORNE SOUND INSULATION OF TIMBER FRAME STRUCTURES

    Directory of Open Access Journals (Sweden)

    Jan Šlechta

    2016-04-01

    Full Text Available Acoustic behavior of structures with wooden elements is nowadays of great interest. At the same time, the estimation of the airborne sound insulation of timber frame structures is a complex procedure which includes the prediction of several resonances and the analysis of a significant decrease of the transmission loss in the low frequency range. Three case studies are presented in the paper. The emphasis is put on the transmission loss in 1/3 octave frequency bands of double leaf structures with gypsum panels, wood studs and a well-damped cavity. Methods of Sharp and Davy are used for the transmission loss prediction. Particular issues are discussed for an asymmetrically sheathed timber frame structure, wood studs with resilient channels and staggered studs. The paper also presents that the weighted sound reduction index is not sufficient quantity for characterizing the airborne sound insulation of timber frame structures. Various methods are employed for the calculation of the transmission loss of a traditional structure on a silicate base. Characteristic differences between a silicate based structure and a timber frame structure are highlighted. The usage of the spectrum adaptation terms is encouraged. The paper intends to be helpful in the field of the transmission loss estimation of double leaf structures with wood studs. Since the acoustic behavior of double leaf structures with wood studs is certainly a complex phenomenon, there is a further need for an improvement of methods for the transmission loss estimation and single number quantities for the evaluation of the sound insulation.

  4. Technical note: development of a quantitative PCR method for monitoring strain dynamics during yogurt manufacture.

    Science.gov (United States)

    Miller, D M; Dudley, E G; Roberts, R F

    2012-09-01

    Yogurt starter cultures may consist of multiple strains of Lactobacillus delbrueckii ssp. bulgaricus (LB) and Streptococcus thermophilus (ST). Conventional plating methods for monitoring LB and ST levels during yogurt manufacture do not allow for quantification of individual strains. The objective of the present work was to develop a quantitative PCR method for quantification of individual strains in a commercial yogurt starter culture. Strain-specific primers were designed for 2 ST strains (ST DGCC7796 and ST DGCC7710), 1 LB strain (DGCC4078), and 1 Lactobacillus delbrueckii ssp. lactis strain (LL; DGCC4550). Primers for the individual ST and LB strains were designed to target unique DNA sequences in clustered regularly interspersed short palindromic repeats. Primers for LL were designed to target a putative mannitol-specific IIbC component of the phosphotransferase system. Following evaluation of primer specificity, standard curves relating cell number to cycle threshold were prepared for each strain individually and in combination in yogurt mix, and no significant differences in the slopes were observed. Strain balance data was collected for yogurt prepared at 41 and 43°C to demonstrate the potential application of this method. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  5. Technical Note: Method to correlate whole-specimen histopathology of radical prostatectomy with diagnostic MR imaging

    Energy Technology Data Exchange (ETDEWEB)

    McGrath, Deirdre M., E-mail: d.mcgrath@sheffield.ac.uk; Lee, Jenny; Foltz, Warren D. [Radiation Medicine Program, Princess Margaret Hospital, University Health Network, Toronto, Ontario M5G 2M9 (Canada); Samavati, Navid [Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario M5S 3G9 (Canada); Jewett, Michael A. S. [Departments of Surgery (Urology) and Surgical Oncology, Princess Margaret Cancer Centre, University Health Network and University of Toronto, Toronto, Ontario M5G 2M9 (Canada); Kwast, Theo van der [Pathology Department, University Health Network, Toronto, Ontario M5G 2C4 (Canada); Chung, Peter [Radiation Medicine Program, Princess Margaret Hospital, University Health Network and the University of Toronto, Toronto, Ontario M5G 2M9 (Canada); Ménard, Cynthia [Radiation Medicine Program, Princess Margaret Hospital, University Health Network and the University of Toronto, Toronto, Ontario M5G 2M9, Canada and Centre Hospitalier de l’Université de Montréal, 1058 Rue Saint-Denis, Montréal, Québec H2X 3J4 (Canada); Brock, Kristy K. [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan 48108 (United States)

    2016-03-15

    Purpose: Validation of MRI-guided tumor boundary delineation for targeted prostate cancer therapy is achieved via correlation with gold-standard histopathology of radical prostatectomy specimens. Challenges to accurate correlation include matching the pathology sectioning plane with the in vivo imaging slice plane and correction for the deformation that occurs between in vivo imaging and histology. A methodology is presented for matching of the histological sectioning angle and position to the in vivo imaging slices. Methods: Patients (n = 4) with biochemical failure following external beam radiotherapy underwent diagnostic MRI to confirm localized recurrence of prostate cancer, followed by salvage radical prostatectomy. High-resolution 3-D MRI of the ex vivo specimens was acquired to determine the pathology sectioning angle that best matched the in vivo imaging slice plane, using matching anatomical features and implanted fiducials. A novel sectioning device was developed to guide sectioning at the correct angle, and to assist the insertion of reference dye marks to aid in histopathology reconstruction. Results: The percentage difference in the positioning of the urethra in the ex vivo pathology sections compared to the positioning in in vivo images was reduced from 34% to 7% through slicing at the best match angle. Reference dye marks were generated, which were visible in ex vivo imaging, in the tissue sections before and after processing, and in histology sections. Conclusions: The method achieved an almost fivefold reduction in the slice-matching error and is readily implementable in combination with standard MRI technology. The technique will be employed to generate datasets for correlation of whole-specimen prostate histopathology with in vivo diagnostic MRI using 3-D deformable registration, allowing assessment of the sensitivity and specificity of MRI parameters for prostate cancer. Although developed specifically for prostate, the method is readily

  6. Technical Note: Method to correlate whole-specimen histopathology of radical prostatectomy with diagnostic MR imaging

    International Nuclear Information System (INIS)

    McGrath, Deirdre M.; Lee, Jenny; Foltz, Warren D.; Samavati, Navid; Jewett, Michael A. S.; Kwast, Theo van der; Chung, Peter; Ménard, Cynthia; Brock, Kristy K.

    2016-01-01

    Purpose: Validation of MRI-guided tumor boundary delineation for targeted prostate cancer therapy is achieved via correlation with gold-standard histopathology of radical prostatectomy specimens. Challenges to accurate correlation include matching the pathology sectioning plane with the in vivo imaging slice plane and correction for the deformation that occurs between in vivo imaging and histology. A methodology is presented for matching of the histological sectioning angle and position to the in vivo imaging slices. Methods: Patients (n = 4) with biochemical failure following external beam radiotherapy underwent diagnostic MRI to confirm localized recurrence of prostate cancer, followed by salvage radical prostatectomy. High-resolution 3-D MRI of the ex vivo specimens was acquired to determine the pathology sectioning angle that best matched the in vivo imaging slice plane, using matching anatomical features and implanted fiducials. A novel sectioning device was developed to guide sectioning at the correct angle, and to assist the insertion of reference dye marks to aid in histopathology reconstruction. Results: The percentage difference in the positioning of the urethra in the ex vivo pathology sections compared to the positioning in in vivo images was reduced from 34% to 7% through slicing at the best match angle. Reference dye marks were generated, which were visible in ex vivo imaging, in the tissue sections before and after processing, and in histology sections. Conclusions: The method achieved an almost fivefold reduction in the slice-matching error and is readily implementable in combination with standard MRI technology. The technique will be employed to generate datasets for correlation of whole-specimen prostate histopathology with in vivo diagnostic MRI using 3-D deformable registration, allowing assessment of the sensitivity and specificity of MRI parameters for prostate cancer. Although developed specifically for prostate, the method is readily

  7. Technical Note: Novel method for water vapour monitoring using wireless communication networks measurements

    Science.gov (United States)

    David, N.; Alpert, P.; Messer, H.

    2009-04-01

    We propose a new technique that overcomes the obstacles of the existing methods for monitoring near-surface water vapour, by estimating humidity from data collected through existing wireless communication networks. Weather conditions and atmospheric phenomena affect the electromagnetic channel, causing attenuations to the radio signals. Thus, wireless communication networks are in effect built-in environmental monitoring facilities. The wireless microwave links, used in these networks, are widely deployed by cellular providers for backhaul communication between base stations, a few tens of meters above ground level. As a result, if all available measurements are used, the proposed method can provide moisture observations with high spatial resolution and potentially high temporal resolution. Further, the implementation cost is minimal, since the data used are already collected and saved by the cellular operators. In addition - many of these links are installed in areas where access is difficult such as orographic terrain and complex topography. As such, our method enables measurements in places that have been hard to measure in the past, or have never been measured before. The technique is restricted to weather conditions which exclude rain, fog or clouds along the propagation path. Strong winds that may cause movement of the link transmitter or receiver (or both) may also interfere with the ability to conduct accurate measurements. We present results from real-data measurements taken from two microwave links used in a backhaul cellular network that show convincing correlation to surface station humidity measurements. The measurements were taken daily in two sites, one in northern Israel (28 measurements), the other in central Israel (29 measurements). The correlation between the microwave link measurements and the humidity gauges were 0.9 and 0.82 for the north and central sites, respectively. The Root Mean Square Differences (RMSD) were 1.8 g/m3 and 3.4 g/m3 for

  8. Note: A novel method for in situ loading of gases via x-ray induced chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Pravica, Michael; Bai, Ligang; Park, Changyong; Liu, Yu; Galley, Martin; Robinson, John; Bhattacharya, Neelanjan (UNLV); (CIW)

    2011-12-14

    We have developed and demonstrated a novel method to load oxygen in a sealed diamond anvil cell via the x-ray induced decomposition of potassium chlorate. By irradiating a pressurized sample of an oxidizer (KClO{sub 3}) with either monochromatic or white beam x-rays from the Advanced Photon Source at ambient temperature and variable pressure, we succeeded in creating a localized region of molecular oxygen surrounded by unreacted sample which was confirmed via Raman spectroscopy. We anticipate that this technique will be useful in loading even more challenging, difficult-to-load gases such as hydrogen and also to load multiple gases.

  9. Note: A novel method for in situ loading of gases via x-ray induced chemistry

    Science.gov (United States)

    Pravica, Michael; Bai, Ligang; Park, Changyong; Liu, Yu; Galley, Martin; Robinson, John; Bhattacharya, Neelanjan

    2011-10-01

    We have developed and demonstrated a novel method to load oxygen in a sealed diamond anvil cell via the x-ray induced decomposition of potassium chlorate. By irradiating a pressurized sample of an oxidizer (KClO3) with either monochromatic or white beam x-rays from the Advanced Photon Source at ambient temperature and variable pressure, we succeeded in creating a localized region of molecular oxygen surrounded by unreacted sample which was confirmed via Raman spectroscopy. We anticipate that this technique will be useful in loading even more challenging, difficult-to-load gases such as hydrogen and also to load multiple gases.

  10. Note: A method for minimizing oxide formation during elevated temperature nanoindentation

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, I. C.; Hodge, A. M., E-mail: ahodge@usc.edu [Department of Aerospace and Mechanical Engineering, University of Southern California, 3650 McClintock Avenue OHE430, Los Angeles, California 90089 (United States); Garcia-Sanchez, E. [Department of Aerospace and Mechanical Engineering, University of Southern California, 3650 McClintock Avenue OHE430, Los Angeles, California 90089 (United States); Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Av. Universidad S/N, San Nicolás de los Garza, NL 66450 (Mexico)

    2014-09-15

    A standardized method to protect metallic samples and minimize oxide formation during elevated-temperature nanoindentation was adapted to a commercial instrument. Nanoindentation was performed on Al (100), Cu (100), and W (100) single crystals submerged in vacuum oil at 200 °C, while the surface morphology and oxidation was carefully monitored using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The results were compared to room temperature and 200 °C nanoindentation tests performed without oil, in order to evaluate the feasibility of using the oil as a protective medium. Extensive surface characterization demonstrated that this methodology is effective for nanoscale testing.

  11. A note on imperfect hedging: a method for testing stability of the hedge ratio

    Directory of Open Access Journals (Sweden)

    Michal Černý

    2012-01-01

    Full Text Available Companies producing, processing and consuming commodities in the production process often hedge their commodity expositions using derivative strategies based on different, highly correlated underlying commodities. Once the open position in a commodity is hedged using a derivative position with another underlying commodity, the appropriate hedge ratio must be determined in order the hedge relationship be as effective as possible. However, it is questionable whether the hedge ratio determined at the inception of the risk management strategy remains stable over the whole period for which the hedging strategy exists. Usually it is assumed that in the short run, the relationship (say, correlation between the two commodities remains stable, while in the long run it may vary. We propose a method, based on statistical theory of stability, for on-line detection whether market movements of prices of the commodities involved in the hedge relationship indicate that the hedge ratio may have been subject to a recent change. The change in the hedge ratio decreases the effectiveness of the original hedge relationship and creates a new open position. The method proposed should inform the risk manager that it could be reasonable to adjust the derivative strategy in a way reflecting the market conditions after the change in the hedge ratio.

  12. Technical Note: Novel method for water vapour monitoring using wireless communication networks measurements

    Directory of Open Access Journals (Sweden)

    N. David

    2009-04-01

    Full Text Available We propose a new technique that overcomes the obstacles of the existing methods for monitoring near-surface water vapour, by estimating humidity from data collected through existing wireless communication networks.

    Weather conditions and atmospheric phenomena affect the electromagnetic channel, causing attenuations to the radio signals. Thus, wireless communication networks are in effect built-in environmental monitoring facilities. The wireless microwave links, used in these networks, are widely deployed by cellular providers for backhaul communication between base stations, a few tens of meters above ground level. As a result, if all available measurements are used, the proposed method can provide moisture observations with high spatial resolution and potentially high temporal resolution. Further, the implementation cost is minimal, since the data used are already collected and saved by the cellular operators. In addition – many of these links are installed in areas where access is difficult such as orographic terrain and complex topography. As such, our method enables measurements in places that have been hard to measure in the past, or have never been measured before. The technique is restricted to weather conditions which exclude rain, fog or clouds along the propagation path. Strong winds that may cause movement of the link transmitter or receiver (or both may also interfere with the ability to conduct accurate measurements.

    We present results from real-data measurements taken from two microwave links used in a backhaul cellular network that show convincing correlation to surface station humidity measurements. The measurements were taken daily in two sites, one in northern Israel (28 measurements, the other in central Israel (29 measurements. The correlation between the microwave link measurements and the humidity gauges were 0.9 and 0.82 for the north and central sites, respectively. The Root Mean Square Differences

  13. Note: Loading method of molecular fluorine using x-ray induced chemistry

    International Nuclear Information System (INIS)

    Pravica, Michael; Sneed, Daniel; White, Melanie; Wang, Yonggang

    2014-01-01

    We have successfully loaded molecular fluorine into a diamond anvil cell at high pressure using the synchrotron x-ray induced decomposition of perfluorohexane (C 6 F 14 ). “White” x-ray radiation from the Advanced Photon Source was used to initiate the chemical decomposition of C 6 F 14 , which resulted in the in situ production of F 2 as verified via Raman spectroscopy. Due to the toxic nature of fluorine, this method will offer significant advantages in the ability to easily load a relatively nontoxic and inert substance into a chamber (such as a diamond anvil cell) that, when sealed with other reactants and irradiate with hard x-rays (>7 keV), releases highly reactive and toxic fluorine into the sample/reaction chamber to enable novel chemical synthesis under isolated and/or extreme conditions

  14. Efficiency of Picture Description and Storytelling Methods in Language Sampling According to the Mean Length of Utterance Index

    Directory of Open Access Journals (Sweden)

    Salime Jafari

    2012-10-01

    Full Text Available Background and Aim: Due to limitation of standardized tests for Persian-speakers with language disorders, spontaneous language sampling collection is an important part of assessment of languageprotocol. Therefore, selection of a language sampling method, which will provide information of linguistic competence in a short time, is important. Therefore, in this study, we compared the languagesamples elicited with picture description and storytelling methods in order to determine the effectiveness of the two methods.Methods: In this study 30 first-grade elementary school girls were selected with simple sampling. To investigate picture description method, we used two illustrated stories with four pictures. Languagesamples were collected through storytelling by telling a famous children’s story. To determine the effectiveness of these two methods the two indices of duration of sampling and mean length ofutterance (MLU were compared.Results: There was no significant difference between MLU in description and storytelling methods(p>0.05. However, duration of sampling was shorter in the picture description method than the storytelling method (p<0.05.Conclusion: Findings show that, the two methods of picture description and storytelling have the same potential in language sampling. Since, picture description method can provide language samples with the same complexity in a shorter time than storytelling, it can be used as a beneficial method forclinical purposes.

  15. Fluctuating local field method probed for a description of small classical correlated lattices

    Science.gov (United States)

    Rubtsov, Alexey N.

    2018-05-01

    Thermal-equilibrated finite classical lattices are considered as a minimal model of the systems showing an interplay between low-energy collective fluctuations and single-site degrees of freedom. Standard local field approach, as well as classical limit of the bosonic DMFT method, do not provide a satisfactory description of Ising and Heisenberg small lattices subjected to an external polarizing field. We show that a dramatic improvement can be achieved within a simple approach, in which the local field appears to be a fluctuating quantity related to the low-energy degree(s) of freedom.

  16. A description of two new species of the genus Erenna (Siphonophora: Physonectae: Erennidae), with notes on recently collected specimens of other Erenna species.

    Science.gov (United States)

    Pugh, P R; Haddock, S H D

    2016-11-10

    Two new Erenna species, E. insidiator sp. nov. and E. sirena sp. nov., are described from specimens collected in the vicinity of Monterey Bay, California, and also, for E. sirena at the southern end of the Gulf of California, Mexico. Further information on the three extant Erenna species is given, based on specimens collected in the same areas. These have enabled, for instance, the identification of three types of tentilla on the tentacles of E. cornuta Pugh, 2001, rather than the two noted on the single previously known specimen. The genus is remarkable for the presence of bioluminescent lures on the tentilla of all five species. In E. sirena sp. nov. the tentilla are also covered by a red-fluorescent layer, which was briefly described by Haddock et al. (2005), and further details are given herein. Another extraordinary feature of the colonies E. sirena sp. nov. is that the main part of the tentacle, with its tentilla, can be extended away from the siphosomal stem on a long peduncle. This phenomenon also appears to occur in E. laciniata Pugh, 2001, and has not been observed before for other physonect species.

  17. Description of JNC's analytical method and its performance for FBR cores

    International Nuclear Information System (INIS)

    Ishikawa, M.

    2000-01-01

    The description of JNC's analytical method and its performance for FBR cores includes: an outline of JNC's Analytical System Compared with ERANOS; a standard data base for FBR Nuclear Design in JNC; JUPITER Critical Experiment; details of Analytical Method and Its Effects on JUPITER; performance of JNC Analytical System (effective multiplication factor k eff , control rod worth, and sodium void reactivity); design accuracy of a 600 MWe-class FBR Core. JNC developed a consistent analytical system for FBR core evaluation, based on JENDL library, f-table method, and three dimensional diffusion/transport theory, which includes comprehensive sensitivity tools to improve the prediction accuracy of core parameters. JNC system was verified by analysis of JUPITER critical experiment, and other facilities. Its performance can be judged quite satisfactory for FBR-core design work, though there is room for further improvement, such as more detailed treatment of cross-section resonance regions

  18. Allowable residual contamination levels for decommissioning. Part 1. A description of the method

    International Nuclear Information System (INIS)

    Napier, B.A.; Kennedy, W.E. Jr.

    1984-10-01

    This paper contains a description of the methods used in a study sponsored by UNC Nuclear Industries to determine Allowable Residual Contamination Levels (ARCL) for decommissioning facilities in the 100 Areas of the Hanford Site. The ARCL method is based on a scenario/exposure-pathway analysis and compliance with an annual dose limit for three specific modes of future use of the land and facilities. Thes modes of use are restricted, controlled, and unrestricted. The information on ARCL values for restricted and controlled use is intended to permit a full consideration of decommissioning alternatives. The analysis results in site-specific ARCL values that can be used for determining compliance with any annual dose limit selected. This flexibility permits proper consideration of field situations involving the radionuclide mixtures and physical conditions encountered. In addition, this method permits a full determination of as low as reasonably achievable (ALARA) conditions

  19. Technical Note: The impact of deformable image registration methods on dose warping.

    Science.gov (United States)

    Qin, An; Liang, Jian; Han, Xiao; O'Connell, Nicolette; Yan, Di

    2018-03-01

    The purpose of this study was to investigate the clinical-relevant discrepancy between doses warped by pure image based deformable image registration (IM-DIR) and by biomechanical model based DIR (BM-DIR) on intensity-homogeneous organs. Ten patients (5Head&Neck, 5Prostate) were included. A research DIR tool (ADMRIE_v1.12) was utilized for IM-DIR. After IM-DIR, BM-DIR was carried out for organs (parotids, bladder, and rectum) which often encompass sharp dose gradient. Briefly, high-quality tetrahedron meshes were generated and deformable vector fields (DVF) from IM-DIR were interpolated to the surface nodes of the volume meshes as boundary condition. Then, a FEM solver (ABAQUS_v6.14) was used to simulate the displacement of internal nodes, which were then interpolated to image-voxel grids to get the more physically plausible DVF. Both geometrical and subsequent dose warping discrepancies were quantified between the two DIR methods. Target registration discrepancy(TRD) was evaluated to show the geometry difference. The re-calculated doses on second CT were warped to the pre-treatment CT via two DIR. Clinical-relevant dose parameters and γ passing rate were compared between two types of warped dose. The correlation was evaluated between parotid shrinkage and TRD/dose discrepancy. The parotid shrunk to 75.7% ± 9% of its pre-treatment volume and the percentage of volume with TRD>1.5 mm) was 6.5% ± 4.7%. The normalized mean-dose difference (NMDD) of IM-DIR and BM-DIR was -0.8% ± 1.5%, with range (-4.7% to 1.5%). 2 mm/2% passing rate was 99.0% ± 1.4%. A moderate correlation was found between parotid shrinkage and TRD and NMDD. The bladder had a NMDD of -9.9% ± 9.7%, with BM-DIR warped dose systematically higher. Only minor deviation was observed for rectum NMDD (0.5% ± 1.1%). Impact of DIR method on treatment dose warping is patient and organ-specific. Generally, intensity-homogeneous organs, which undergo larger deformation/shrinkage during

  20. Note on the Physical Basis of the Kutta Condition in Unsteady Two-Dimensional Panel Methods

    Directory of Open Access Journals (Sweden)

    M. La Mantia

    2015-01-01

    Full Text Available Force generation in avian and aquatic species is of considerable interest for possible engineering applications. The aim of this work is to highlight the theoretical and physical foundations of a new formulation of the unsteady Kutta condition, which postulates a finite pressure difference at the trailing edge of the foil. The condition, necessary to obtain a unique solution and derived from the unsteady Bernoulli equation, implies that the energy supplied for the wing motion generates trailing-edge vortices and their overall effect, which depends on the motion initial parameters, is a jet of fluid that propels the wing. The postulated pressure difference (the value of which should be experimentally obtained models the trailing-edge velocity difference that generates the thrust-producing jet. Although the average thrust values computed by the proposed method are comparable to those calculated by assuming null pressure difference at the trailing edge, the latter (commonly used approach is less physically meaningful than the present one, as there is a singularity at the foil trailing edge. Additionally, in biological applications, that is, for autonomous flapping, the differences ought to be more significant, as the corresponding energy requirements should be substantially altered, compared to the studied oscillatory motions.

  1. Technical note: A method for isolating glycogen granules from ruminal protozoa for further characterization.

    Science.gov (United States)

    Hall, Mary Beth

    2016-03-01

    Evaluation of physical, chemical, and enzymatic hydrolysis characteristics of protozoal glycogen is best performed on a pure substrate to avoid interference from other cell components. A method for isolating protozoal glycogen granules without use of detergents or other potentially contaminating chemicals was developed. Rumen inoculum was incubated anerobically in vitro with glucose. Glycogen-laden protozoa produced in the fermentation, primarily isotrichids, were allowed to sediment in a separatory funnel and were dispensed. The protozoa were processed through repeated centrifugations and sonication to isolate glycogen granules largely free of feed and cellular debris. The final water-insoluble lyophilized product analyzed as 98.3% α-glucan with very rare starch granules and 1.9% protein. Observed losses of glycogen granules during the clean-up process indicate that this procedure should not be used for quantitative assessment of protozoal glycogen from fermentations. Further optimization of this procedure to enhance the amount of glycogen obtained per fermentation may be possible. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  2. Technical Note: A fast online adaptive replanning method for VMAT using flattening filter free beams

    Energy Technology Data Exchange (ETDEWEB)

    Ates, Ozgur; Ahunbay, Ergun E.; Li, X. Allen, E-mail: ali@mcw.edu [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, Wisconsin 53226 (United States); Moreau, Michel [Elekta, Inc., Maryland Heights, Missouri 63043 (United States)

    2016-06-15

    Purpose: To develop a fast replanning algorithm based on segment aperture morphing (SAM) for online replanning of volumetric modulated arc therapy (VMAT) with flattening filter free (FFF) beams. Methods: A software tool was developed to interface with a VMAT research planning system, which enables the input and output of beam and machine parameters of VMAT plans. The SAM algorithm was used to modify multileaf collimator positions for each segment aperture based on the changes of the target from the planning (CT/MR) to daily image [CT/CBCT/magnetic resonance imaging (MRI)]. The leaf travel distance was controlled for large shifts to prevent the increase of VMAT delivery time. The SAM algorithm was tested for 11 patient cases including prostate, pancreatic, and lung cancers. For each daily image set, three types of VMAT plans, image-guided radiation therapy (IGRT) repositioning, SAM adaptive, and full-scope reoptimization plans, were generated and compared. Results: The SAM adaptive plans were found to have improved the plan quality in target and/or critical organs when compared to the IGRT repositioning plans and were comparable to the reoptimization plans based on the data of planning target volume (PTV)-V100 (volume covered by 100% of prescription dose). For the cases studied, the average PTV-V100 was 98.85% ± 1.13%, 97.61% ± 1.45%, and 92.84% ± 1.61% with FFF beams for the reoptimization, SAM adaptive, and repositioning plans, respectively. The execution of the SAM algorithm takes less than 10 s using 16-CPU (2.6 GHz dual core) hardware. Conclusions: The SAM algorithm can generate adaptive VMAT plans using FFF beams with comparable plan qualities as those from the full-scope reoptimization plans based on daily CT/CBCT/MRI and can be used for online replanning to address interfractional variations.

  3. Amended diagnosis and redescription of Pristimantis marmoratus (Boulenger, 1900 (Amphibia: Craugastoridae, with a description of its advertisement call and notes on its breeding ecology and phylogenetic relationships

    Directory of Open Access Journals (Sweden)

    Philippe J.R. Kok

    2018-01-01

    Full Text Available The frog Pristimantis marmoratus was originally described as Hylodes marmoratus by George A. Boulenger in 1900 based on a single specimen reported to have been collected at the foot of Mount Roraima in Guyana in 1898. We herein discuss the exact location of the type locality of P. marmoratus and provide a redescription of the species based on new material from Kaieteur National Park and from the slopes of Maringma-tepui in Guyana. We also describe the previously unknown vocalization and breeding ecology of the species, and conducted an exploratory molecular analysis of the phylogenetic relationships within the genus Pristimantis represented by the members of the “unistrigatus species group” in the Guiana Shield. Pristimantis marmoratus is a small-sized species mainly distinguished from its known Guiana Shield congeners by the combination of F I < II, SVL ≤ 20.4 in males, presence of vocal slits in males, granular/pustulate dorsal skin with well-developed scapular ridges, basal webbing between fingers, fringes on fingers and toes, crossed iris, diffuse yellow or pale green wash on groin, and absence of flashy colour on axillary/pre-axillary region. The advertisement call consists of a single note repeated at a rate of ca 11 calls/min with a dominant frequency ranging from 2756 to 3101 Hz. Pristimantis marmoratus is primarily arboreal, exclusively active at dusk, and probably restricted to the pristine rainforests of the Pantepui uplands and highlands, east of the Gran Sabana between ca 600 and 1800 m above sea level. Preliminary molecular analyses recovered Pristimantis marmoratus as sister to an unnamed species from the Eastern Guiana Shield. On grounds of the newly established distributional extent we suggest maintaining the IUCN conservation status as Least Concern.

  4. A structured hazard analysis and risk assessment method for automotive systems—A descriptive study

    International Nuclear Information System (INIS)

    Beckers, Kristian; Holling, Dominik; Côté, Isabelle; Hatebur, Denis

    2017-01-01

    The 2011 release of the first version of the ISO 26262 standard for automotive systems demand the elicitation of safety goals following a rigorous method for hazard and risk analysis. Companies are struggling with the adoption of the standard due to ambiguities, documentation demands and the alignment of the standards demands to existing processes. We previously proposed a structured engineering method to deal with these problems developed in applying action research together with an OEM. In this work, we evaluate how applicable the method is for junior automotive software engineers by a descriptive study. We provided the method to 8 members of the master course Automotive Software Engineering (ASE) at the Technical University Munich. The participants have each been working in the automotive industry for 1–4 years in parallel to their studies. We investigated their application of our method to an electronic steering column lock system. The participants applied our method in a first round alone and afterwards discussed their results in groups. Our data analysis revealed that the participants could apply the method successfully and the hazard analysis and risk assessment achieved a high precision and productivity. Moreover, the precision could be improved significantly during group discussions.

  5. A calibration method for fringe reflection technique based on the analytical phase-slope description

    Science.gov (United States)

    Wu, Yuxiang; Yue, Huimin; Pan, Zhipeng; Liu, Yong

    2018-05-01

    The fringe reflection technique (FRT) has been one of the most popular methods to measure the shape of specular surface these years. The existing system calibration methods of FRT usually contain two parts, which are camera calibration and geometric calibration. In geometric calibration, the liquid crystal display (LCD) screen position calibration is one of the most difficult steps among all the calibration procedures, and its accuracy is affected by the factors such as the imaging aberration, the plane mirror flatness, and LCD screen pixel size accuracy. In this paper, based on the deduction of FRT analytical phase-slope description, we present a novel calibration method with no requirement to calibrate the position of LCD screen. On the other hand, the system can be arbitrarily arranged, and the imaging system can either be telecentric or non-telecentric. In our experiment of measuring the 5000mm radius sphere mirror, the proposed calibration method achieves 2.5 times smaller measurement error than the geometric calibration method. In the wafer surface measuring experiment, the measurement result with the proposed calibration method is closer to the interferometer result than the geometric calibration method.

  6. The method of moments and its application to the description of liquid He4

    International Nuclear Information System (INIS)

    Parlinski, K.

    1974-01-01

    The method of moments used to calculate the time dependent correlation functions is discussed. To reconstruct the approximate correlation function the finite number of the moments of a given function is needed. Every such approximation is an exact solution of the problem described by some model Hamiltonian. The formulae for any order of the approximation are given. Also described is another way of using the moments, which relies on the expansion of the Fourier transform of the correlation function into the series of the Hermitian polynomials, the coefficient of which are combinations of the moments. The method of moments was applied to the description of liquid He 4 which is at absolute zero temperature. The calculated moments of the density-density correlation function were applied to the description of the experimentally observed oscillations of width and average energy of the distribution of neutrons scattered by liquid helium as a function of the wave vector greater than 2 Angstroem -1 . Good agreement between the calculated and experimentally observed oscillations was obtained. It was also shown that the dynamics structure factor is highly asymmetrical. Using the calculated moments of the velocity-velocity correlation function, the expansion coefficients of the incoherent, double differential scattering cross-section into the series over the inverse wave vector were found up to the term of third order. The coefficients of this expansion do not depend explicitly on the relative particle occupation fraction of the zero-momentum state, i.e. the condensate. This expansion describes well the expermentally observed distributions of scattered neutrons for the wave vector 14.33 Angstroem -1 . The obtained results indicate that the inelastic neutron scattering method for high momentum transfers cannot be used as a straightforward method of measuring the relative occupation number of the zero-momentum state. The methods of elaboration of neutron scattering results at

  7. Research methods in nursing students' Bachelor's theses in Sweden: A descriptive study.

    Science.gov (United States)

    Johansson, Linda; Silén, Marit

    2018-07-01

    During the nursing programme in Sweden, students complete an independent project that allows them to receive both a professional qualification as a nurse and a Bachelor's degree. This project gives students the opportunity to develop and apply skills such as critical thinking, problem-solving and decision-making, thus preparing them for their future work. However, only a few, small-scale studies have analysed the independent project to gain more insight into how nursing students carry out this task. The aim of the present study was to describe the methods, including ethical considerations and assessment of data quality, applied in nursing students' independent Bachelor's degree projects in a Swedish context. A descriptive study with a quantitative approach. A total of 490 independent projects were analysed using descriptive statistics. Literature reviews were the predominant project form. References were often used to support the analysis method. They were not, however, always relevant to the method. This was also true of ethical considerations. When a qualitative approach was used, and data collected through interviews, the participants were typically professionals. In qualitative projects involving analysis of biographies/autobiographies or blogs participants were either persons with a disease or next of kin of a person with a disease. Although most of the projects were literature reviews, it seemed unclear to the nursing students how the data should be analysed as well as what ethical issues should be raised in relation to the method. Consequently, further research and guidance are needed. In Sweden, independent projects are not considered research and are therefore not required to undergo ethics vetting. However, it is important that they be designed so as to avoid possible research ethics problems. Asking persons about their health, which occurred in some of the empirical projects, may therefore be considered questionable. Copyright © 2018 Elsevier Ltd. All

  8. Research Note:

    DEFF Research Database (Denmark)

    Behuria, Pritish; Buur, Lars; Gray, Hazel

    2017-01-01

    its core conceptual and methodological features. This Research Note starts by setting out our understanding of political settlements and provides an overview of existing political settlements literature on African countries. The note then explores how the key concept of ‘holding power’ has been...

  9. Calculation notes that support accident scenario and consequence determination of a waste tank criticality

    International Nuclear Information System (INIS)

    Marusich, R.M. Westinghouse Hanford

    1996-01-01

    The purpose of this calculation note is to provide the basis for criticality consequences for the Tank Farm Safety Analysis Report (FSAR). Criticality scenario is developed and details and description of the analysis methods are provided

  10. Digital assist: A comparison of two note-taking methods (traditional vs. digital pen) for students with emotional behavioral disorders

    Science.gov (United States)

    Rody, Carlotta A.

    High school biology classes traditionally follow a lecture format to disseminate content and new terminology. With the inclusive practices of No Child Left Behind, the Common Core State Standards, and end-of-course exam requirement for high school diplomas, classes include a large range of achievement levels and abilities. Teachers assume, often incorrectly, that students come to class prepared to listen and take notes. In a standard diploma, high school biology class in a separate school for students with emotional and behavioral disorders, five students participated in a single-subject, alternating treatment design study that compared the use of regular pens and digital pens to take notes during 21 lecture sessions. Behavior measures were threefold between the two interventions: (a) quantity of notes taken per minute during lectures, (b) quantity of notes or notations taken during review pauses, and (c) percent of correct responses on the daily comprehension quizzes. The study's data indicated that two students were inclined to take more lecture notes when using the digital pen. Two students took more notes with the regular pen. One student demonstrated no difference in her performance with either pen type. Both female students took more notes per minute, on average, than the three males regardless of pen type. During the review pause, three of the five students only added notes or notations to their notes when using the regular pen. The remaining two students did not add to their notes. Quiz scores differed in favor of the regular pen. All five participants earned higher scores on quizzes given during regular pen sessions. However, the differences were minor, and recommendations are made for specific training in note-taking, the pause strategy, and digital pen fluency which may produce different results for both note-taking and quiz scores.

  11. Description logic-based methods for auditing frame-based medical terminological systems.

    Science.gov (United States)

    Cornet, Ronald; Abu-Hanna, Ameen

    2005-07-01

    Medical terminological systems (TSs) play an increasingly important role in health care by supporting recording, retrieval and analysis of patient information. As the size and complexity of TSs are growing, the need arises for means to audit them, i.e. verify and maintain (logical) consistency and (semantic) correctness of their contents. This is not only important for the management of TSs but also for providing their users with confidence about the reliability of their contents. Formal methods have the potential to play an important role in the audit of TSs, although there are few empirical studies to assess the benefits of using these methods. In this paper we propose a method based on description logics (DLs) for the audit of TSs. This method is based on the migration of the medical TS from a frame-based representation to a DL-based one. Our method is characterized by a process in which initially stringent assumptions are made about concept definitions. The assumptions allow the detection of concepts and relations that might comprise a source of logical inconsistency. If the assumptions hold then definitions are to be altered to eliminate the inconsistency, otherwise the assumptions are revised. In order to demonstrate the utility of the approach in a real-world case study we audit a TS in the intensive care domain and discuss decisions pertaining to building DL-based representations. This case study demonstrates that certain types of inconsistencies can indeed be detected by applying the method to a medical terminological system. The added value of the method described in this paper is that it provides a means to evaluate the compliance to a number of common modeling principles in a formal manner. The proposed method reveals potential modeling inconsistencies, helping to audit and (if possible) improve the medical TS. In this way, it contributes to providing confidence in the contents of the terminological system.

  12. Description of the atomic disorder (local order) in crystals by the mixed-symmetry method

    Science.gov (United States)

    Dudka, A. P.; Novikova, N. E.

    2017-11-01

    An approach to the description of local atomic disorder (short-range order) in single crystals by the mixed-symmetry method based on Bragg scattering data is proposed, and the corresponding software is developed. In defect-containing crystals, each atom in the unit cell can be described by its own symmetry space group. The expression for the calculated structural factor includes summation over different sets of symmetry operations for different atoms. To facilitate the search for new symmetry elements, an "atomic disorder expert" was developed, which estimates the significance of tested models. It is shown that the symmetry lowering for some atoms correlates with the existence of phase transitions (in langasite family crystals) and the anisotropy of physical properties (in rare-earth dodecaborides RB12).

  13. Description of two-proton radioactivity by the methods of the quantum theory of ternary fission

    International Nuclear Information System (INIS)

    Kadmenskij, S.G.

    2005-01-01

    Two-proton decay of spherical nuclei has been investigated on the base of the formalism of quantum mechanical theory of ternary fission. The suggested method of construction of partial two-proton-decay-width amplitudes and of asymptotics of the decaying nucleus wave functions allows to solve a problem of two-proton radioactivity description without the traditionally used in R-matrix approaches laborious sewing procedure for internal and external parent nucleus wave functions in three-body scheme. In the frame of diagonal approximation, the wave-function structure for Cooper pair of two emitted protons in parent nucleus was analyzed as well as the behavior of the wave function describing potential scattering of two-proton-decay products with taking into account decay channel coupling and properties of interaction potentials between these products [ru

  14. A note on variational multiscale methods for high-contrast heterogeneous porous media flows with rough source terms

    KAUST Repository

    Calo, Victor M.

    2011-09-01

    In this short note, we discuss variational multiscale methods for solving porous media flows in high-contrast heterogeneous media with rough source terms. Our objective is to separate, as much as possible, subgrid effects induced by the media properties from those due to heterogeneous source terms. For this reason, enriched coarse spaces designed for high-contrast multiscale problems are used to represent the effects of heterogeneities of the media. Furthermore, rough source terms are captured via auxiliary correction equations that appear in the formulation of variational multiscale methods [23]. These auxiliary equations are localized and one can use additive or multiplicative constructions for the subgrid corrections as discussed in the current paper. Our preliminary numerical results show that one can capture the effects due to both spatial heterogeneities in the coefficients (such as permeability field) and source terms (e.g., due to singular well terms) in one iteration. We test the cases for both smooth source terms and rough source terms and show that with the multiplicative correction, the numerical approximations are more accurate compared to the additive correction. © 2010 Elsevier Ltd.

  15. RESEARCH NOTE

    Indian Academy of Sciences (India)

    Navya

    RESEARCH NOTE. CDKN2A and MC1R ... Department of Pharmacy and Department of Nursing, School of Health Sciences, Frederick. University, Nicosia ..... Appears with highest frequency in African, Asian-Indian, and Papua. New Guinean ...

  16. Editorial note

    Directory of Open Access Journals (Sweden)

    Tore Ahlbäck

    2009-01-01

    Full Text Available Editorial note of the Scripta Instituti Donneriani Aboensis, vol. 21, Postmodern Spirituality, based on papers read at the symposium on Postmodern Spirituality held at Åbo, Finland, on 11–13 June 2008.

  17. Project Notes

    Science.gov (United States)

    School Science Review, 1978

    1978-01-01

    Presents sixteen project notes developed by pupils of Chipping Norton School and Bristol Grammar School, in the United Kingdom. These Projects include eight biology A-level projects and eight Chemistry A-level projects. (HM)

  18. Description of odd-mass nuclei by multi-reference energy density functional methods

    International Nuclear Information System (INIS)

    Bally, B.

    2014-01-01

    In this work, we are interested in the treatment of odd-mass atomic nuclei in energy density functional (EDF) models. More precisely, the goal of this thesis is to develop and to apply to odd-mass nuclei, the theoretical extensions of the EDF method that are: first, the projection technique, and secondly the configuration mixing by the generator coordinate method (GCM). These two extensions are part of the so-called multi-reference energy density functional (MR-EDF) formalism and allow one to take into account, within an EDF context, the 'beyond-mean-field' correlations between the nucleons forming the nucleus. Until now, the MR-EDF formalism has been applied, in its fully-fledged version, only to the calculation of even-even nuclei. In this thesis, we want to demonstrate the applicability of such a model also for the description of odd-mass nuclei. In the first part of this thesis, we describe the theoretical formalism of the EDF models, giving particular attention to the treatment of symmetries within our approach. In the second part of the manuscript, we apply our model to the nucleus 25 Mg and investigate different aspects of the method (e.g. numerical accuracy, convergence of the configuration mixing, comparison to known experimental data). The results obtained in this work are encouraging and demonstrate the potential of our approach for theoretical nuclear structure calculations. (author)

  19. Technical note: Rapid image-based field methods improve the quantification of termite mound structures and greenhouse-gas fluxes

    Directory of Open Access Journals (Sweden)

    P. A. Nauer

    2018-06-01

    Full Text Available Termite mounds (TMs mediate biogeochemical processes with global relevance, such as turnover of the important greenhouse gas methane (CH4. However, the complex internal and external morphology of TMs impede an accurate quantitative description. Here we present two novel field methods, photogrammetry (PG and cross-sectional image analysis, to quantify TM external and internal mound structure of 29 TMs of three termite species. Photogrammetry was used to measure epigeal volume (VE, surface area (AE and mound basal area (AB by reconstructing 3-D models from digital photographs, and compared against a water-displacement method and the conventional approach of approximating TMs by simple geometric shapes. To describe TM internal structure, we introduce TM macro- and micro-porosity (θM and θμ, the volume fractions of macroscopic chambers, and microscopic pores in the wall material, respectively. Macro-porosity was estimated using image analysis of single TM cross sections, and compared against full X-ray computer tomography (CT scans of 17 TMs. For these TMs we present complete pore fractions to assess species-specific differences in internal structure. The PG method yielded VE nearly identical to a water-displacement method, while approximation of TMs by simple geometric shapes led to errors of 4–200 %. Likewise, using PG substantially improved the accuracy of CH4 emission estimates by 10–50 %. Comprehensive CT scanning revealed that investigated TMs have species-specific ranges of θM and θμ, but similar total porosity. Image analysis of single TM cross sections produced good estimates of θM for species with thick walls and evenly distributed chambers. The new image-based methods allow rapid and accurate quantitative characterisation of TMs to answer ecological, physiological and biogeochemical questions. The PG method should be applied when measuring greenhouse-gas emissions from TMs to avoid large errors from inadequate shape

  20. Notes on Piezoelectricity

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-03

    These notes provide a pedagogical discussion of the physics of piezoelectricity. The exposition starts with a brief analysis of the classical (continuum) theory of piezoelectric phenomena in solids. The main subject of the notes is, however, a quantum mechanical analysis. We first derive the Frohlich Hamiltonian as part of the description of the electron-phonon interaction. The results of this analysis are then employed to derive the equations of piezoelectricity. A couple of examples with the zinc blende and and wurtzite structures are presented at the end

  1. Transport-level description of the 252Cf-source method using the Langevin technique

    International Nuclear Information System (INIS)

    Stolle, A.M.; Akcasu, A.Z.

    1991-01-01

    The fluctuations in the neutron number density and detector outputs in a nuclear reactor can be analyzed conveniently by using the Langevin equation approach. This approach can be implemented at any level of approximation to describe the time evolution of the neutron population, from the most complete transport-level description to the very basic point reactor analysis of neutron number density fluctuations. In this summary, the complete space- and velocity-dependent transport-level formulation of the Langevin equation approach is applied to the analysis of the 252 Cf-source-driven noise analysis (CSDNA) method, an experimental technique developed by J.T. Mihalczo at Oak Ridge National Laboratory, which makes use of noise analysis to determine the reactivity of subcritical media. From this analysis, a theoretical expression for the subcritical multiplication factor is obtained that can then be used to interpret the experimental data. Results at the transport level are in complete agreement with an independent derivation performed by Sutton and Doub, who used the probability density method to interpret the CSDNA experiment, but differed from other expressions that have appeared in the literature

  2. Asymptotic description of plasma turbulence: Krylov-Bogoliubov methods and quasi-particles

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Bertrand, P.; Decyk, V.K.

    2001-01-01

    The asymptotic theory of charged particle motion in electromagnetic fields is developed for the general case of finite Larmor-radius effects by means of Krylov-Bogoliubov averaging method. The correspondence between the general asymptotic methods, elaborated by M. Krylov and M.Bogoliubov, the quasi-particle description and gyrokinetics is established. Such a comparison is used to shed more light on the physical sense of the reduced Poisson equation, introduced in gyrokinetics, and the particle polarization drift. It is shown that the modification of the Poisson equation in the asymptotic theory is due to the non-conservation of the magnetic moment and gyrophase trembling. it is shown that the second-order modification of the adiabatic invariant can determine the conditions of global plasma stability and introduces new nonlinear terms into the reduced Poisson equation. Such a modification is important for several plasma orderings, e.g. NHD type ordering. The feasibility of numerical simulation schemes in which the polarization drift is included into the quasi-particle equations of motion, and the Poisson equation remains unchanged is analyzed. A consistent asymptotic model is proposed in which the polarization drift is included into the quasi-particle equations of motion and the particle and quasi-particle velocities are equal. It is shown that in such models there are additional modifications of the reduced Poisson equation. The latter becomes even more complicated in contrast to earlier suggestions

  3. Faults Classification Of Power Electronic Circuits Based On A Support Vector Data Description Method

    Directory of Open Access Journals (Sweden)

    Cui Jiang

    2015-06-01

    Full Text Available Power electronic circuits (PECs are prone to various failures, whose classification is of paramount importance. This paper presents a data-driven based fault diagnosis technique, which employs a support vector data description (SVDD method to perform fault classification of PECs. In the presented method, fault signals (e.g. currents, voltages, etc. are collected from accessible nodes of circuits, and then signal processing techniques (e.g. Fourier analysis, wavelet transform, etc. are adopted to extract feature samples, which are subsequently used to perform offline machine learning. Finally, the SVDD classifier is used to implement fault classification task. However, in some cases, the conventional SVDD cannot achieve good classification performance, because this classifier may generate some so-called refusal areas (RAs, and in our design these RAs are resolved with the one-against-one support vector machine (SVM classifier. The obtained experiment results from simulated and actual circuits demonstrate that the improved SVDD has a classification performance close to the conventional one-against-one SVM, and can be applied to fault classification of PECs in practice.

  4. A Method to Compare the Descriptive Power of Different Types of Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1980-01-01

    The purpose of this paper is to show how the descriptive power of different types of Petri nets can be compared, without the use of Petri net languages. Moreover the paper proposes an extension of condition/event-nets and it is shown that this extension has the same descriptive power as condition/event-nets....

  5. SAFETY NOTES

    CERN Document Server

    TIS Secretariat

    2001-01-01

    Please note that the revisions of safety notes no 3 (NS 3 Rev. 2) and no 24 (NS 24 REV.) entitled respectively 'FIRE PREVENTION FOR ENCLOSED SPACES IN LARGE HALLS' and 'REMOVING UNBURIED ELV AND LVA ELECTRIC CONDUITS' are available on the web at the following urls: http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322811&version=1&filename=version_francaise.pdf http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322861&version=2&filename=version_francaise.pdf Paper copies can also be obtained from the TIS Divisional Secretariat, email tis.secretariat@cern.ch

  6. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  7. Study on the relevance of some of the description methods for plateau-honed surfaces

    International Nuclear Information System (INIS)

    Yousfi, M; Mezghani, S; Demirci, I; El Mansori, M

    2014-01-01

    Much work has been undertaken in recent years into the determination of a complete parametric description of plateau-honed surfaces with the intention of making a link between the process conditions, the surface topography and the required functional performances. Different advanced techniques (plateau/valleys decomposition using the normalized Abbott–Firestone curve or morphological operators, multiscale decomposition using continuous wavelets transform, etc) were proposed and applied in different studies. This paper re-examines the current state of developments and addresses a discussion on the relevance of the different proposed parameters and characterization methods for plateau-honed surfaces by considering the control loop manufacturing-characterization-function. The relevance of appropriate characterization is demonstrated through two experimental studies. They consider the effect of the most plateau honing process variables (the abrasive grit size and abrasive indentation velocity in finish-honing and the plateau-honing stage duration and pressure) on cylinder liner surface textures and hydrodynamic friction of the ring-pack system. (paper)

  8. Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, F.; Tonn, B.

    1999-05-01

    This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

  9. Technical Note

    African Journals Online (AJOL)

    Administratör

    In this report on four patients, we did not use any of these techniques. The existence and the site of the fistulas was clearly demonstrated using basic but important preoperative detailed assessment and two intraoperative findings. The preoperative referral note that indicated the site of technical difficulty during the previous ...

  10. Please note

    CERN Multimedia

    2006-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorised to have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding. (Version française la semaine prochaine.)

  11. Editor's Note

    African Journals Online (AJOL)

    On another note: the editor and the editorial team acknowledge the financial support of the Carnegie Corporation of New York through the University of Ghana Building A New Generation of Academics in Africa (BANGA-Africa) Project. We also use this platform to express our gratitude for the support of various stakeholders, ...

  12. On Overfitting in Analysis of Symmetrically Predicted Endogenous Subgroups from Randomized Experimental Samples: Part Three of a Method Note in Three Parts

    Science.gov (United States)

    Harvill, Eleanor L.; Peck, Laura R.; Bell, Stephen H.

    2013-01-01

    Using exogenous characteristics to identify endogenous subgroups, the approach discussed in this method note creates symmetric subsets within treatment and control groups, allowing the analysis to take advantage of an experimental design. In order to maintain treatment--control symmetry, however, prior work has posited that it is necessary to use…

  13. A Note on the Semi-Inverse Method and a Variational Principle for the Generalized KdV-mKdV Equation

    Directory of Open Access Journals (Sweden)

    Li Yao

    2013-01-01

    Full Text Available Ji-Huan He systematically studied the inverse problem of calculus of variations. This note reveals that the semi-inverse method also works for a generalized KdV-mKdV equation with nonlinear terms of any orders.

  14. Appropriate description of intermolecular interactions in the methane hydrates: an assessment of DFT methods.

    Science.gov (United States)

    Liu, Yuan; Zhao, Jijun; Li, Fengyu; Chen, Zhongfang

    2013-01-15

    Accurate description of hydrogen-bonding energies between water molecules and van der Waals interactions between guest molecules and host water cages is crucial for study of methane hydrates (MHs). Using high-level ab initio MP2 and CCSD(T) results as the reference, we carefully assessed the performance of a variety of exchange-correlation functionals and various basis sets in describing the noncovalent interactions in MH. The functionals under investigation include the conventional GGA, meta-GGA, and hybrid functionals (PBE, PW91, TPSS, TPSSh, B3LYP, and X3LYP), long-range corrected functionals (ωB97X, ωB97, LC-ωPBE, CAM-B3LYP, and LC-TPSS), the newly developed Minnesota class functionals (M06-L, M06-HF, M06, and M06-2X), and the dispersion-corrected density functional theory (DFT) (DFT-D) methods (B97-D, ωB97X-D, PBE-TS, PBE-Grimme, and PW91-OBS). We found that the conventional functionals are not suitable for MH, notably, the widely used B3LYP functional even predicts repulsive interaction between CH(4) and (H(2)O)(6) cluster. M06-2X is the best among the M06-Class functionals. The ωB97X-D outperforms the other DFT-D methods and is recommended for accurate first-principles calculations of MH. B97-D is also acceptable as a compromise of computational cost and precision. Considering both accuracy and efficiency, B97-D, ωB97X-D, and M06-2X functional with 6-311++G(2d,2p) basis set without basis set superposition error (BSSE) correction are recommended. Though a fairly large basis set (e.g., aug-cc-pVTZ) and BSSE correction are necessary for a reliable MP2 calculation, DFT methods are less sensitive to the basis set and BSSE correction if the basis set is sufficient (e.g., 6-311++G(2d,2p)). These assessments provide useful guidance for choosing appropriate methodology of first-principles simulation of MH and related systems. © 2012 Wiley Periodicals, Inc. Copyright © 2012 Wiley Periodicals, Inc.

  15. Application note :

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  16. Time-dependent Hartree--Fock method: description of heavy-ion collisions and allowance for correlations

    International Nuclear Information System (INIS)

    Maedler, P.

    1984-01-01

    The review describes the application of the time-dependent Hartree--Fock method to the description of heavy-ion interactions at energies of order 10 MeV/nucleon. The fundamentals of the method are presented and qualitative properties of its results are discussed. Realistic calculations of fusion reactions, deep inelastic collisions, and particle emission are presented and compared with the corresponding experimental data. Various approaches that generalize the method by taking into account correlations are considered

  17. Description of methods for making activation detectors for use in nuclear reactors; Description des procedes de fabrication des detecteurs d'activation utilises dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Barbalat, R; Le Coguie, R; Leger, P; Salon, L; Thierry, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    A brief description of methods currently used for making activation detectors, thin films and various deposits used in nuclear reactors. The thicknesses required vary from about a few tenths of a micron to a few tenths of a millimeter. Different techniques are used for fixing the large variety of elements: rolling, moulding, painting, electrolysis, vacuum deposition, thin films, wires, enamels, protective linings, etc. (authors) [French] Expose succinct des procedes actuellement mis en oeuvre pour la realisation des detecteurs d'activation, feuilles minces et depots divers utilises dans les reacteurs nucleaires. La gamme des epaisseurs necessaires s'etendant approximativement des dixiemes de micrometre aux dixiemes de millimetre. La diversite des elements a fixer justifiant les techniques differentes selon les cas: laminage, moulage, peinture, electrolyse, depot sous vide, couches minces, fils, emaux, revetements protecteurs, etc. (auteurs)

  18. 29 CFR 2520.104b-4 - Alternative methods of compliance for furnishing the summary plan description and summaries of...

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Alternative methods of compliance for furnishing the summary plan description and summaries of material modifications of a pension plan to a retired participant, a separated participant with vested benefits, and a beneficiary receiving benefits. 2520.104b-4 Section 2520.104b-4 Labor Regulations Relating to...

  19. Description and validation of a combination of acoustical radiosity and the image source method

    DEFF Research Database (Denmark)

    Marbjerg, Gerd Høy; Jeong, Cheol-Ho; Brunskog, Jonas

    2014-01-01

    A model that combines image source modelling and acoustical radiosity with complex boundary con- ditions, thus including phase shifts on reflection, has been developed. The model is denoted Phased Acoustical Radiosity and Image Source Model (PARISM). It has been developed in order to be able...... to model both specular and diffuse reflections with complex-valued acoustical descriptions of the surfaces. This paper mainly describes the combination of the two models and the implementation of the angle dependent surface descriptions both in the image source model and in acoustical radiosity...

  20. Rapid descriptive sensory methods – Comparison of Free Multiple Sorting, Partial Napping, Napping, Flash Profiling and conventional profiling

    DEFF Research Database (Denmark)

    Dehlholm, Christian; Brockhoff, Per B.; Meinert, Lene

    2012-01-01

    is a modal restriction of Napping to specific sensory modalities, directing sensation and still allowing a holistic approach to products. The new methods are compared to Flash Profiling, Napping and conventional descriptive sensory profiling. Evaluations are performed by several panels of expert assessors......Two new rapid descriptive sensory evaluation methods are introduced to the field of food sensory evaluation. The first method, free multiple sorting, allows subjects to perform ad libitum free sortings, until they feel that no more relevant dissimilarities among products remain. The second method...... are applied for the graphical validation and comparisons. This allows similar comparisons and is applicable to single-block evaluation designs such as Napping. The partial Napping allows repetitions on multiple sensory modalities, e.g. appearance, taste and mouthfeel, and shows the average...

  1. Statistical analysis and interpretation of prenatal diagnostic imaging studies, Part 2: descriptive and inferential statistical methods.

    Science.gov (United States)

    Tuuli, Methodius G; Odibo, Anthony O

    2011-08-01

    The objective of this article is to discuss the rationale for common statistical tests used for the analysis and interpretation of prenatal diagnostic imaging studies. Examples from the literature are used to illustrate descriptive and inferential statistics. The uses and limitations of linear and logistic regression analyses are discussed in detail.

  2. Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

    Science.gov (United States)

    Lennington, R. K.; Rassbach, M. E.

    1979-01-01

    Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

  3. Minimum Description Length Block Finder, a Method to Identify Haplotype Blocks and to Compare the Strength of Block Boundaries

    OpenAIRE

    Mannila, H.; Koivisto, M.; Perola, M.; Varilo, T.; Hennah, W.; Ekelund, J.; Lukk, M.; Peltonen, L.; Ukkonen, E.

    2003-01-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the ...

  4. Shielding chalculations in x-rays installations for medical diagnosis. description of the method and computational solution

    International Nuclear Information System (INIS)

    Borroto Valdes, M.; Saez, D.G.

    1992-01-01

    Shielding requirements for x-rays diagnostic installations are investigated. The description of an entirely analytical method for calculation of thickness, based in the papers of Simpkin and NCRP49, is presented. Considerations described in specialized method to solving this problem. A program for microcomputer IBM and compatibles ones is available for estimation of minimum shielding requirements in lead, concrete and steel. Similar results were obtained from comparing with others authors

  5. Development and implementation of theoretical methods for the description of electronically core-excited states

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, Jan

    2016-03-23

    My PhD project mainly consists of two important parts. One was to enhance and develop variants of the core-valence-separation-algebraic-diagrammatic-construction (CVS-ADC) method and implement all approaches efficiently in the adcman program, which is part of the Q-chem program package. Secondly, I benchmarked these implementations and simulated X-ray absorption spectra of small- and medium-sized molecules from different fields. In this thesis, I present my implementations, as well as the results and applications obtained with the CVS-ADC methods and give a general introduction into quantum chemical methods. At first, I implemented the CVS-ADC approach up to the extended second in an efficient way. The program is able to deal with systems up to 500 basis functions in an adequate computational time, which allows for accurate calculations of medium-sized closed-shell molecules, e.g. acenaphthenequinone (ANQ). Afterwards, the CVS-ADC implementation was extended for the first time to deal with open-shell systems, i.e. ions and radicals, which implies a treatment of unrestricted wave functions and spin-orbitals. The resulting method is denoted as CVS-UADC(2)-x. For the first time, I applied the CVS approximation to the the third order ADC scheme, derived the working equations, and implemented the CVS-ADC(3) method in adcman. As the last step, I applied the CVS formalism for the first time to the ISR approach to enable calculations of core-excited state properties and densities. To benchmark all restricted and unrestricted CVS-ADC/CVS-ISR methods up to third order in perturbation theory, I chose a set of small molecules, e.g. carbon monoxide (CO). The calculated values of core-excitation energies, transition moments and static dipole moments are compared with experimental data or other approaches, thereby estimating complete basis set (CBS) limits. Furthermore, a comprehensive study of different basis sets is performed. In combination with the CBS limit of the aug

  6. Universal Natural Shapes: From Unifying Shape Description to Simple Methods for Shape Analysis and Boundary Value Problems

    Science.gov (United States)

    Gielis, Johan; Caratelli, Diego; Fougerolle, Yohan; Ricci, Paolo Emilio; Tavkelidze, Ilia; Gerats, Tom

    2012-01-01

    Gielis curves and surfaces can describe a wide range of natural shapes and they have been used in various studies in biology and physics as descriptive tool. This has stimulated the generalization of widely used computational methods. Here we show that proper normalization of the Levenberg-Marquardt algorithm allows for efficient and robust reconstruction of Gielis curves, including self-intersecting and asymmetric curves, without increasing the overall complexity of the algorithm. Then, we show how complex curves of k-type can be constructed and how solutions to the Dirichlet problem for the Laplace equation on these complex domains can be derived using a semi-Fourier method. In all three methods, descriptive and computational power and efficiency is obtained in a surprisingly simple way. PMID:23028417

  7. Editors' note

    Science.gov (United States)

    Denker, Carsten; Feller, Alex; Schmidt, Wolfgang; von der Lühe, Oskar

    2012-11-01

    This topical issue of Astronomische Nachrichten/Astronomical Notes is a collection of reference articles covering the GREGOR solar telescope, its science capabilities, its subsystems, and its dedicated suite of instruments for high-resolution observations of the Sun. Because ground-based telescopes have life spans of several decades, it is only natural that they continuously reinvent themselves. Literally, the GREGOR telescope builds on the foundations of the venerable Gregory-Coudé Telescope (GCT) at Observatorio del Teide, Tenerife, Spain. Acknowledging the fact that new discoveries in observational solar physics are driven by larger apertures to collect more photons and to scrutinize the Sun in finer detail, the GCT was decommissioned and the building was made available to the GREGOR project.

  8. Editorial note

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Hrymak, A.; Lee, J.

    2009-01-01

    industrial and educational applications. These articles will highlight theory, models, algorithms and applications with respect to value preservation and/or value creation or growth within the chemical product supply chain. To highlight and motivate research in the emerging challenges in PSE, we plan...... components of PSE—modeling, numerical analysis, optimization, systems and control theory, computer science, and, management science will be highlighted through the published articles (full-length papers, perspective papers, review papers, short notes and letters to the editor). They will cover...... and intelligent systems, integrated approaches to design, control and data analysis, systematic techniques for managing complexity, etc.), PSE emerging domains (product-process design, enterprise-wide optimization, energy and sustainability, biological engineering, pharmaceutical engineering, etc.) and novel...

  9. Verbal Description of Concrete Objects: A Method for Assessing Semantic Circumlocution in Persons With Aphasia.

    Science.gov (United States)

    Antonucci, Sharon M; MacWilliam, Colleen

    2015-11-01

    We investigated from a theoretically motivated perspective what information differentiated sufficient from insufficient descriptions of objects provided by persons with aphasia. Twenty-one adults with aphasia consequent to single left-hemisphere stroke verbally described 9 living and 9 nonliving objects. Responses were scored for accuracy (i.e., sufficiency) and tallied for type and quantity of semantic feature information provided. Main effects and interactions were identified using repeated measures analyses of variance, with significant findings followed up with planned comparisons. Differences between correct and incorrect descriptions were identified with respect to both feature type and feature distinctiveness for living and nonliving items, in particular highlighting the importance of distinctive features in descriptions of both domains. These findings add to the relatively small body of literature investigating semantic feature processing in adults with aphasia. This is a critical gap to close when considered in light of the preponderance of semantically based treatments for word-retrieval impairment in stroke-aphasia. Our findings provide preliminary support for the notion that semantically guided treatments for word-retrieval impairment in stroke-aphasia may be geared toward increasing specificity of semantic circumlocution to increase semantic self-cueing and to improve communication of information to conversation partners.

  10. Description of a method for assessing veld condition in the Karoo ...

    African Journals Online (AJOL)

    Keywords: Canopy-spread cover; Current grazing capacity; Dry matter; Ecological index method; Forage; Grazing-index method; Karoo; Line-point survey method; Strikes; Veld condition; Veld condition index; botany; method; south africa; razing-index method; razing capacity; ine-point survey method; eld condition index

  11. Effects of filtering methods on muscle and fat cross-sectional area measurement by pQCT: a technical note

    International Nuclear Information System (INIS)

    Sherk, Vanessa D; Bemben, Michael G; Palmer, Ian J; Bemben, Debra A

    2011-01-01

    Peripheral quantitative computed tomography (pQCT) is most commonly used for bone density and morphology assessment of the limbs, but it can also be used for soft tissue area quantification by segmenting regions representing different tissues. Scanning and analyzing cross-sectional areas of larger thighs present a special challenge due to increased statistical noise created from fewer detected x-ray photons. The purpose of this technical note is to compare total, muscle and fat cross-sectional area (CSA) measurements of the midthigh with Stratec 3000 pQCT scans using no filter, a weak smoothing filter and a strong smoothing filter to CSA measurements of midthigh MRI scans analyzed by Image J, a public domain image processing program. Nine healthy men and women participated in this study. CSAs did not differ significantly between MRI and strongly filtered pQCT images with per cent differences ranging from −3.1% for muscle to +6.5% for fat. The per cent difference in muscle CSA values between MRI and pQCT with the weak filter (−24.0 ± 38.0%) or no filter (−44.9 ± 22.7%) was strongly related to total thigh CSA (r = 0.78–0.92, p < 0.05). We propose that the midthigh can be assessed for soft tissue area measurements with pQCT, provided that strong smoothing filter is utilized. (note)

  12. Editorial Note

    Science.gov (United States)

    van der Meer, F.; Ommen Kloeke, E.

    2015-07-01

    With this editorial note we would like to update you on the performance of the International Journal of Applied Earth Observation and Geoinformation (JAG) and inform you about changes that have been made to the composition of the editorial team. Our Journal publishes original papers that apply earth observation data for the management of natural resources and the environment. Environmental issues include biodiversity, land degradation, industrial pollution and natural hazards such as earthquakes, floods and landslides. As such the scope is broad and ranges from conceptual and more fundamental work on earth observation and geospatial sciences to the more problem-solving type of work. When I took over the role of Editor-in-Chief in 2012, I together with the Publisher set myself the mission to position JAG in the top-3 of the remote sensing and GIS journals. To do so we strived at attracting high quality and high impact papers to the journal and to reduce the review turnover time to make JAG a more attractive medium for publications. What has been achieved? Have we reached our ambitions? We can say that: The submissions have increased over the years with over 23% for the last 12 months. Naturally not all may lead to more papers, but at least a portion of the additional submissions should lead to a growth in journal content and quality.

  13. Note & Recensioni

    Directory of Open Access Journals (Sweden)

    2014-12-01

    Full Text Available VolumiVito Campanelli, Web Aesthetics. How Digital Media Affect Culture and Society; Id., Remix It Yourself. Analisi socio-estetica delle forme comunicative del Web [Emanuele Crescimanno] • Jean-François Bordron, Image et vérité. Essais sur les dimensions iconiques de la connaissance [Veronica Estay Stange] • Stéphane Dumas, Les peaux créatrices – Esthétique de la sécrétion [Marc-Vincent Howlett]NoteQuidam veritatis effectus. A proposito di A Plea for Balance in Philosophy. Essays in honour of Paolo Parrini [Fabrizio Desideri] • A Single Face to Capture the Whole World: Literary Shapes and Shadows. An Interview With Tolm Coibin [Fabrizia Abbate] •Convegno Le sensible a l’oeuvre: savoirs du corps entre esthetique et neurosciences, Parigi, 15 Maggio 2014 [Jessica Murano] 

  14. Research Note: The consequences of different methods for handling missing network data in Stochastic Actor Based Models.

    Science.gov (United States)

    Hipp, John R; Wang, Cheng; Butts, Carter T; Jose, Rupa; Lakon, Cynthia M

    2015-05-01

    Although stochastic actor based models (e.g., as implemented in the SIENA software program) are growing in popularity as a technique for estimating longitudinal network data, a relatively understudied issue is the consequence of missing network data for longitudinal analysis. We explore this issue in our research note by utilizing data from four schools in an existing dataset (the AddHealth dataset) over three time points, assessing the substantive consequences of using four different strategies for addressing missing network data. The results indicate that whereas some measures in such models are estimated relatively robustly regardless of the strategy chosen for addressing missing network data, some of the substantive conclusions will differ based on the missing data strategy chosen. These results have important implications for this burgeoning applied research area, implying that researchers should more carefully consider how they address missing data when estimating such models.

  15. Minimum description length block finder, a method to identify haplotype blocks and to compare the strength of block boundaries.

    Science.gov (United States)

    Mannila, H; Koivisto, M; Perola, M; Varilo, T; Hennah, W; Ekelund, J; Lukk, M; Peltonen, L; Ukkonen, E

    2003-07-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the significance of each block boundary. We have applied the method to the published data of Daly and colleagues. The results expose some problems that exist in the current methods for the evaluation of the significance of predicted block boundaries. Our method, MDL block finder, can be used to compare block borders in different sample sets, and we demonstrate this by applying the MDL-based method to define the block structure in chromosomes from population isolates.

  16. EDITORIAL NOTE

    African Journals Online (AJOL)

    Mugumbate

    study was to assess the role of financial institutions towards affordable housing to middle income earners in Kampala City. A sample size of 113 respondents was selected using both probability and non-probability sampling methods. Data was collected and analysed using mixed methods. Findings revealed a weak positive.

  17. New Jersey Center for Tourette Syndrome Sharing Repository: methods and sample description

    Directory of Open Access Journals (Sweden)

    King Robert A

    2008-11-01

    Full Text Available Abstract Background Tourette Syndrome is a neuropsychiatric disorder characterized by chronic motor and phonic tics. Affected individuals and their family members are at an increased risk for other neuropsychiatric conditions including obsessive-compulsive disorder and attention deficit hyperactivity disorder. While there is consistent evidence that genetic factors play a significant etiologic role, no replicable susceptibility alleles have thus far been identified. Description Here we discuss a sharing resource of clinical and genetic data, the New Jersey Center for Tourette Syndrome Sharing Repository, whose goal is to provide clinical data, DNA, and lymphoblastoid cell lines to qualified researchers. Conclusion Opening access to the data and patient material to the widest possible research community will hasten the identification of causal genetic factors and facilitate better understanding and treatment of this often impairing disorder.

  18. The Thai Anesthesia Incidents Study (THAI Study) of anesthetic outcomes: I. Description of methods and populations.

    Science.gov (United States)

    Charuluxananan, Somrat; Suraseranivongse, Suwannee; Punjasawadwong, Yodying; Somboonviboon, Wanna; Nipitsukarn, Thana; Sothikarnmanee, Thepakorn; Vasinanukorn, Mayuree; Werawatganon, Thewarug; Tanudsintum, Surasak; Lekprasert, Varinee; Hintong, Thanoo

    2005-11-01

    Since anesthesia, unlike medical or surgical specialties, does not constitute treatment, The Royal College of Anesthesiologists of Thailand host the Thai Anesthesia Incidents Study (THAI Study) of anesthetic outcomes to determine factors related to anesthesia related adverse events. A prospective descriptive study of occurrence screening was conducted in 20 hospitals comprised of 7 university, 4 general and 4 district hospitals across Thailand. Anesthesia personnels were required to fill up patient-related, surgical-related, anesthesia-related variables and adverse outcomes on a strutured data entry form. The data included preanesthetic evaluation intraoperative period and 24 hr postoperative period. Adverse events specific form was recorded when adverse events occurred. All data were keyed in data management unit with double entry technique and descriptive statistics was used in the first phase of this study. A total of 163403 consecutive cases were recorded in one year. The mean (S.D.) of age, weight and height of patients were 38.6(2.3) yrs, 53.9(17.7) kgs and 153.4(22.7) cm respectively. There were more female (52.9%) than male (47. 1%) patients with ASA PS 1, 2, 3, 4, 5 = 50.8%, 36.3%, 10.7%, 2.0%, 0.2% respectively. Hypertension (11.6%), anemia (7.7%) and diabetes melitus (6.8%) were the three most common abnormalities in preanesthetic history taking. Mallampati score of 111870 patients grade 1, 2, 3, 4 were 54.0%, 39.7%, 5.6%, 0.7% and laryngoscopic grade 1, 2, 3, 4 of 74888 patients were 81.0%, 15.5%, 3.0% and 0.5% respectively. The first phase of THAI study epidemiological project can represent both the anesthesia and surgical profiles in Thailand. The collected data available should be useful for the improvement of the quality of anesthesia, guidelines for clinical practices, medical education and for further research.

  19. Technical note: Comparison of metal-on-metal hip simulator wear measured by gravimetric, CMM and optical profiling methods

    Science.gov (United States)

    Alberts, L. Russell; Martinez-Nogues, Vanesa; Baker Cook, Richard; Maul, Christian; Bills, Paul; Racasan, R.; Stolz, Martin; Wood, Robert J. K.

    2018-03-01

    Simulation of wear in artificial joint implants is critical for evaluating implant designs and materials. Traditional protocols employ the gravimetric method to determine the loss of material by measuring the weight of the implant components before and after various test intervals and after the completed test. However, the gravimetric method cannot identify the location, area coverage or maximum depth of the wear and it has difficulties with proportionally small weight changes in relatively heavy implants. In this study, we compare the gravimetric method with two geometric surface methods; an optical light method (RedLux) and a coordinate measuring method (CMM). We tested ten Adept hips in a simulator for 2 million cycles (MC). Gravimetric and optical methods were performed at 0.33, 0.66, 1.00, 1.33 and 2 MC. CMM measurements were done before and after the test. A high correlation was found between the gravimetric and optical methods for both heads (R 2  =  0.997) and for cups (R 2  =  0.96). Both geometric methods (optical and CMM) measured more volume loss than the gravimetric method (for the heads, p  =  0.004 (optical) and p  =  0.08 (CMM); for the cups p  =  0.01 (optical) and p  =  0.003 (CMM)). Two cups recorded negative wear at 2 MC by the gravimetric method but none did by either the optical method or by CMM. The geometric methods were prone to confounding factors such as surface deformation and the gravimetric method could be confounded by protein absorption and backside wear. Both of the geometric methods were able to show the location, area covered and depth of the wear on the bearing surfaces, and track their changes during the test run; providing significant advantages to solely using the gravimetric method.

  20. Technical Note: Validation of two methods to determine contact area between breast and compression paddle in mammography

    NARCIS (Netherlands)

    Branderhorst, Woutjan; de Groot, Jerry E.; van Lier, Monique G. J. T. B.; Highnam, Ralph P.; den Heeten, Gerard J.; Grimbergen, Cornelis A.

    2017-01-01

    Purpose: To assess the accuracy of two methods of determining the contact area between the compression paddle and the breast in mammography. An accurate method to determine the contact area is essential to accurately calculate the average compression pressure applied by the paddle. Methods: For a

  1. Description of rotational excitations of odd nuclei by the method of projection

    International Nuclear Information System (INIS)

    Mazepus, V.V.

    1981-01-01

    We have carried out a projection on the angular-momentum operator eigenspace for deformed nuclei. The space of the trial wave functions is chosen to be broader than in the ordinary projection approach. It is shown that this method of projection leads to the particle + rotor model but not to the cranking model. A comparison is made with the method of approximate projection

  2. Description of development of an analytical method for measurement of PAA in tattoo ink and PMU

    DEFF Research Database (Denmark)

    Lassen, Pia

    This review gives a background on azo pigments and primary aromatic amines (PAA) and describe how to develop a robust method for analyzing these in tattoo ink.......This review gives a background on azo pigments and primary aromatic amines (PAA) and describe how to develop a robust method for analyzing these in tattoo ink....

  3. Developing corpus-based translation methods between informal and formal mathematics : project description

    NARCIS (Netherlands)

    Kaliszyk, C.; Urban, J.; Vyskocil, J.; Geuvers, J.H.; Watt, S.M.; Davenport, J.H.; Sexton, A.P.; Sojka, P.; Urban, J.

    2014-01-01

    The goal of this project is to (i) accumulate annotated informal/formal mathematical corpora suitable for training semi-automated translation between informal and formal mathematics by statistical machine-translation methods, (ii) to develop such methods oriented at the formalization task, and in

  4. Biology Notes.

    Science.gov (United States)

    School Science Review, 1982

    1982-01-01

    Describes laboratory procedures, demonstrations, and classroom materials, including "diet poker" (nutrition game); an experiment on enzyme characteristics; demonstrations of yeast anaerobic respiration and color preference in Calliphora larvae; method to extract eugenol from clove oil to show antibiotic properties; and Benedict's test.…

  5. Technical note

    DEFF Research Database (Denmark)

    Hermansen, Jonas S; Fonslet, Jesper; Søndergaard, Lasse R

    2017-01-01

    PURPOSE: To provide a faster and more intuitive way of designing shielding for PET facilities, while still relying on the principles of the AAPM 108 Taskforce guidelines, as well as illustrating the calculation output using dose maps that are easily evaluated. METHODS: A graphical user interface ...

  6. Description of heat flux measurement methods used in hydrocarbon and propellant fuel fires at Sandia.

    Energy Technology Data Exchange (ETDEWEB)

    Nakos, James Thomas

    2010-12-01

    The purpose of this report is to describe the methods commonly used to measure heat flux in fire applications at Sandia National Laboratories in both hydrocarbon (JP-8 jet fuel, diesel fuel, etc.) and propellant fires. Because these environments are very severe, many commercially available heat flux gauges do not survive the test, so alternative methods had to be developed. Specially built sensors include 'calorimeters' that use a temperature measurement to infer heat flux by use of a model (heat balance on the sensing surface) or by using an inverse heat conduction method. These specialty-built sensors are made rugged so they will survive the environment, so are not optimally designed for ease of use or accuracy. Other methods include radiometers, co-axial thermocouples, directional flame thermometers (DFTs), Sandia 'heat flux gauges', transpiration radiometers, and transverse Seebeck coefficient heat flux gauges. Typical applications are described and pros and cons of each method are listed.

  7. Technical Note: Method of Morris effectively reduces the computational demands of global sensitivity analysis for distributed watershed models

    Directory of Open Access Journals (Sweden)

    J. D. Herman

    2013-07-01

    Full Text Available The increase in spatially distributed hydrologic modeling warrants a corresponding increase in diagnostic methods capable of analyzing complex models with large numbers of parameters. Sobol' sensitivity analysis has proven to be a valuable tool for diagnostic analyses of hydrologic models. However, for many spatially distributed models, the Sobol' method requires a prohibitive number of model evaluations to reliably decompose output variance across the full set of parameters. We investigate the potential of the method of Morris, a screening-based sensitivity approach, to provide results sufficiently similar to those of the Sobol' method at a greatly reduced computational expense. The methods are benchmarked on the Hydrology Laboratory Research Distributed Hydrologic Model (HL-RDHM over a six-month period in the Blue River watershed, Oklahoma, USA. The Sobol' method required over six million model evaluations to ensure reliable sensitivity indices, corresponding to more than 30 000 computing hours and roughly 180 gigabytes of storage space. We find that the method of Morris is able to correctly screen the most and least sensitive parameters with 300 times fewer model evaluations, requiring only 100 computing hours and 1 gigabyte of storage space. The method of Morris proves to be a promising diagnostic approach for global sensitivity analysis of highly parameterized, spatially distributed hydrologic models.

  8. Description of comparison method for evaluating spatial or temporal homogeneity of environmental monitoring data

    International Nuclear Information System (INIS)

    Mecozzi, M.; Cicero, A.M.

    1995-01-01

    In this paper a comparison method to verify the homogeneity/inhomogeneity of environmental monitoring data is described. The comparison method is based on the simultaneous application of three statistical tests: One-Way ANOVA, Kruskal Wallis and One-Way IANOVA. Robust tests such as IANOVA and Kruskal Wallis can be more efficient than the usual ANOVA methods because are resistant against the presence of outliers and divergences from the normal distribution of the data. The evidences of the study are that the validation of the result about presence/absence of homogeneity in the data set is obtained when it is confirmed by two tests at least

  9. Microscopic description of nuclear few-body systems with the stochastic variational method

    International Nuclear Information System (INIS)

    Suzuki, Yasuyuki

    2000-01-01

    A simple gambling procedure called the stochastic variational method can be applied, together with appropriate variational trial functions, to solve a few-body system where the correlation between the constituents plays an important role in determining its structure. The usefulness of the method is tested by comparing to other accurate solutions for Coulombic systems. Examples of application shown here include few-nucleon systems interacting with realistic forces and few-cluster systems with the Pauli principle being taken into account properly. These examples confirm the power of the stochastic variational method. There still remain many problems for extending to a system consisting of more particles. (author)

  10. Physics and numerical methods of OPTMAN. A coupled-channels method based on soft-rotator model for a description of collective nuclear structure and excitations

    International Nuclear Information System (INIS)

    Soukhovitskii, Efrem Sh.; Morogovskii, Gennadij B.; Chiba, Satoshi; Iwamoto, Osamu; Fukahori, Tokio

    2004-03-01

    This report gives a detailed description of the theory and computational algorithms of modernized coupled-channels optical model code OPTMAN based on the soft-rotator model for the collective nuclear structure and excitations. This work was performed under the Project Agreement B-521 with the International Science and Technology Center (Moscow), financing party of which is Japan. As a result of this work, the computational method of OPTMAN was totally updated, and an user-friendly interface was attached. (author)

  11. Description and evaluation of a peracetic acid air sampling and analysis method.

    Science.gov (United States)

    Nordling, John; Kinsky, Owen R; Osorio, Magdalena; Pechacek, Nathan

    2017-12-01

    Peracetic acid (PAA) is a corrosive chemical with a pungent odor, which is extensively used in occupational settings and causes various health hazards in exposed workers. Currently, there is no US government agency recommended method that could be applied universally for the sampling and analysis of PAA. Legacy methods for determining airborne PAA vapor levels frequently suffered from cross-reactivity with other chemicals, particularly hydrogen peroxide (H 2 O 2 ). Therefore, to remove the confounding factor of cross-reactivity, a new viable, sensitive method was developed for assessment of PAA exposure levels, based on the differential reaction kinetics of PAA with methyl p-tolylsulfide (MTS), relative to H 2 O 2 , to preferentially derive methyl p-tolysulfoxide (MTSO). By quantifying MTSO concentration produced in the liquid capture solution from an air sampler, using an internal standard, and utilizing the reaction stoichiometry of PAA and MTS, the original airborne concentration of PAA is determined. After refining this liquid trap high-performance liquid chromatography (HPLC) method in the laboratory, it was tested in five workplace settings where PAA products were used. PAA levels ranged from the detection limit of 0.013 parts per million (ppm) to 0.4 ppm. The results indicate a viable and potentially dependable method to assess the concentrations of PAA vapors under occupational exposure scenarios, though only a small number of field measurements were taken while field testing this method. However, the low limit of detection and precision offered by this method makes it a strong candidate for further testing and validation to expand the uses of this liquid trap HPLC method.

  12. The Moulded Site Data (MSD) wind correlation method: description and assessment

    Energy Technology Data Exchange (ETDEWEB)

    King, C.; Hurley, B.

    2004-12-01

    The long-term wind resource at a potential windfarm site may be estimated by correlating short-term on-site wind measurements with data from a regional meteorological station. A correlation method developed at Airtricity is described in sufficient detail to be reproduced. An assessment of its performance is also described; the results may serve as a guide to expected accuracy when using the method as part of an annual electricity production estimate for a proposed windfarm. (Author)

  13. METHODS OF ESTIMATION OF COMPLEX FREQUENCY DESCRIPTIONS OF LTM AND BRM BEARING KNOTS

    OpenAIRE

    A. Pohrebnyak

    2015-01-01

    The method of studying bearing units (ball bearings) of handling and construction of road machines in the low-frequency range of vibration-acoustic signal is presented. It includes: the choice of the method and place of vibration sensors installation, vibration signals registration modes, instruments, algorithms of processing and formation of diagnostic features of the signal, determination of the threshold values of the diagnostic parameter. The characteristic spectra of vibration velocities...

  14. A Note on the Solutions of the Van der Pol and Duffing Equations Using a Linearisation Method

    Directory of Open Access Journals (Sweden)

    Sandile S. Motsa

    2012-01-01

    Full Text Available We present a novel application of the successive linearisation method to the classical Van der Pol and Duffing oscillator equations. By recasting the governing equations as nonlinear eigenvalue problems we obtain accurate values of the frequency and amplitude. We demonstrate that the proposed method can be used to obtain the limit cycle and bifurcation diagrams of the governing equations. Comparison with exact and other results in the literature shows that the method is accurate and effective in finding solutions of nonlinear equations with oscillatory solutions, nonlinear eigenvalue problems, and other nonlinear problems with bifurcations.

  15. What is it like to meditate? Methods and issues for micro-phenomenological description of meditative experience

    DEFF Research Database (Denmark)

    Petitmengin, Claire; Beek, Martijn van; Bitbol, Michel

    2017-01-01

    associated with contemplative practice: what it is like to meditate – from moment to moment, at different stages of practice – remains almost invisible in contemporary contemplative science. Recently, "micro-phenomenological" interview methods have been developed to help us become aware of lived experience......In our society where interest in Buddhist meditation is expanding enormously, numerous scientific studies are now conducted on the neurophysiological effects of meditation practices and on the neural correlates of meditative states. However, very few studies have been conducted on the experience...... and describe it with rigor and precision. The present article presents the results of a pilot project aiming at applying these methods to the description of meditative experience. The first part of the article describes these methods and their adjustment for the investigation of meditative experience...

  16. Use of orthonormal polynomial expansion method to the description of the energy spectra of biological liquids

    International Nuclear Information System (INIS)

    Bogdanova, N.B.; Todorov, S.T.; Ososkov, G.A.

    2015-01-01

    Orthonormal polynomial expansion method (OPEM) is applied to the data obtained by the method of energy spectra to the liquid of the biomass of wheat in the case when herbicides are used. Since the biomass of a biological object contains liquid composed mainly of water, the method of water spectra is applicable to this case as well. For comparison, the similar data obtained from control sample consisting of wheat liquid without the application of herbicides are shown. The total variance OPEM is involved including errors in both dependent and independent variables. Special criteria are used for evaluating the optimal polynomial degree and the number of iterations. The presented numerical results show good agreement with the experimental data. The developed analysis frame is of interest for future analysis in theoretical ecology.

  17. Applying terminological methods and description logic for creating and implementing and ontology on inhibition

    DEFF Research Database (Denmark)

    Zambach, Sine; Madsen, Bodil Nistrup

    2009-01-01

    By applying formal terminological methods to model an ontology within the domain of enzyme inhibition, we aim to clarify concepts and to obtain consistency. Additionally, we propose a procedure for implementing this ontology in OWL with the aim of obtaining a strict structure which can form...

  18. Description of the electron-hydrogen collision by the Coulomb Fourier transform method

    International Nuclear Information System (INIS)

    Levin, S.B.

    2005-01-01

    A recently developed Coulomb Fourier Transform method is applied to the system containing one heavy ion and two electrons. The transformed Hamiltonian is described with a controlled accuracy in an effective finite basis set as a finite dimensional operator matrix. The kernels of interaction are formulated in terms of the so called Nordsieck integrals

  19. Research of descriptions of collinear aerial receiving system ADS-B by numeral methods

    Directory of Open Access Journals (Sweden)

    В. П. Харченко

    2013-07-01

    Full Text Available Calculations of electric field intensity and directional diagrammes for colinear antennas using a method of moments in the framework of two program complexes are carried out. Comparison has shown high level of results coincidence. The sample of the antenna which is used in operating system for reception of ADS-B signals from airborne transponders is constructed

  20. Description of a double centrifugation tube method for concentrating canine platelets.

    Science.gov (United States)

    Perazzi, Anna; Busetto, Roberto; Martinello, Tiziana; Drigo, Michele; Pasotto, Daniela; Cian, Francesco; Patruno, Marco; Iacopetti, Ilaria

    2013-07-22

    To evaluate the efficiency of platelet-rich plasma preparations by means of a double centrifugation tube method to obtain platelet-rich canine plasma at a concentration at least 4 times higher than the baseline value and a concentration of white blood cells not exceeding twice the reference range. A complete blood count was carried out for each sample and each concentrate. Whole blood samples were collected from 12 clinically healthy dogs (consenting blood donors). Blood was processed by a double centrifugation tube method to obtain platelet concentrates, which were then analyzed by a flow cytometry haematology system for haemogram. Platelet concentration and white blood cell count were determined in all samples. Platelet concentration at least 4 times higher than the baseline value and a white blood cell count not exceeding twice the reference range were obtained respectively in 10 cases out of 12 (83.3%) and 11 cases out of 12 (91.6%). This double centrifugation tube method is a relatively simple and inexpensive method for obtaining platelet-rich canine plasma, potentially available for therapeutic use to improve the healing process.

  1. A method to assess obstetric outcomes using the 10-Group Classification System: a quantitative descriptive study.

    LENUS (Irish Health Repository)

    Rossen, Janne

    2017-01-01

    Internationally, the 10-Group Classification System (TGCS) has been used to report caesarean section rates, but analysis of other outcomes is also recommended. We now aim to present the TGCS as a method to assess outcomes of labour and delivery using routine collection of perinatal information.

  2. Microscopic and self-consistent description of nuclear properties by extended generator-coordinate method

    International Nuclear Information System (INIS)

    Didong, M.

    1976-01-01

    The extend generator-coordinated method is discussed and a procedure is given for the solution of the Hill-Wheeler equation. The HFB-theory, the particle-number and angular-momentum projections necessary for symmetry, and the modified surprice delta interaction are discussed. The described procedures are used to calculate 72 Ge, 70 Zn and 74 Ge properties. (BJ) [de

  3. The description of a method for accurately estimating creatinine clearance in acute kidney injury.

    Science.gov (United States)

    Mellas, John

    2016-05-01

    Acute kidney injury (AKI) is a common and serious condition encountered in hospitalized patients. The severity of kidney injury is defined by the RIFLE, AKIN, and KDIGO criteria which attempt to establish the degree of renal impairment. The KDIGO guidelines state that the creatinine clearance should be measured whenever possible in AKI and that the serum creatinine concentration and creatinine clearance remain the best clinical indicators of renal function. Neither the RIFLE, AKIN, nor KDIGO criteria estimate actual creatinine clearance. Furthermore there are no accepted methods for accurately estimating creatinine clearance (K) in AKI. The present study describes a unique method for estimating K in AKI using urine creatinine excretion over an established time interval (E), an estimate of creatinine production over the same time interval (P), and the estimated static glomerular filtration rate (sGFR), at time zero, utilizing the CKD-EPI formula. Using these variables estimated creatinine clearance (Ke)=E/P * sGFR. The method was tested for validity using simulated patients where actual creatinine clearance (Ka) was compared to Ke in several patients, both male and female, and of various ages, body weights, and degrees of renal impairment. These measurements were made at several serum creatinine concentrations in an attempt to determine the accuracy of this method in the non-steady state. In addition E/P and Ke was calculated in hospitalized patients, with AKI, and seen in nephrology consultation by the author. In these patients the accuracy of the method was determined by looking at the following metrics; E/P>1, E/P1 and 0.907 (0.841, 0.973) for 0.95 ml/min accurately predicted the ability to terminate renal replacement therapy in AKI. Include the need to measure urine volume accurately. Furthermore the precision of the method requires accurate estimates of sGFR, while a reasonable measure of P is crucial to estimating Ke. The present study provides the

  4. Geomatic Methods for the Analysis of Data in the Earth Sciences: Lecture Notes in Earth Sciences, Vol. 95

    Science.gov (United States)

    Pavlis, Nikolaos K.

    Geomatics is a trendy term that has been used in recent years to describe academic departments that teach and research theories, methods, algorithms, and practices used in processing and analyzing data related to the Earth and other planets. Naming trends aside, geomatics could be considered as the mathematical and statistical “toolbox” that allows Earth scientists to extract information about physically relevant parameters from the available data and accompany such information with some measure of its reliability. This book is an attempt to present the mathematical-statistical methods used in data analysis within various disciplines—geodesy, geophysics, photogrammetry and remote sensing—from a unifying perspective that inverse problem formalism permits. At the same time, it allows us to stretch the relevance of statistical methods in achieving an optimal solution.

  5. Technical Note: Range verification system using edge detection method for a scintillator and a CCD camera system

    Energy Technology Data Exchange (ETDEWEB)

    Saotome, Naoya, E-mail: naosao@nirs.go.jp; Furukawa, Takuji; Hara, Yousuke; Mizushima, Kota; Tansho, Ryohei; Saraya, Yuichi; Shirai, Toshiyuki; Noda, Koji [Department of Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)

    2016-04-15

    Purpose: Three-dimensional irradiation with a scanned carbon-ion beam has been performed from 2011 at the authors’ facility. The authors have developed the rotating-gantry equipped with the scanning irradiation system. The number of combinations of beam properties to measure for the commissioning is more than 7200, i.e., 201 energy steps, 3 intensities, and 12 gantry angles. To compress the commissioning time, quick and simple range verification system is required. In this work, the authors develop a quick range verification system using scintillator and charge-coupled device (CCD) camera and estimate the accuracy of the range verification. Methods: A cylindrical plastic scintillator block and a CCD camera were installed on the black box. The optical spatial resolution of the system is 0.2 mm/pixel. The camera control system was connected and communicates with the measurement system that is part of the scanning system. The range was determined by image processing. Reference range for each energy beam was determined by a difference of Gaussian (DOG) method and the 80% of distal dose of the depth-dose distribution that were measured by a large parallel-plate ionization chamber. The authors compared a threshold method and a DOG method. Results: The authors found that the edge detection method (i.e., the DOG method) is best for the range detection. The accuracy of range detection using this system is within 0.2 mm, and the reproducibility of the same energy measurement is within 0.1 mm without setup error. Conclusions: The results of this study demonstrate that the authors’ range check system is capable of quick and easy range verification with sufficient accuracy.

  6. Technical Note: Range verification system using edge detection method for a scintillator and a CCD camera system

    International Nuclear Information System (INIS)

    Saotome, Naoya; Furukawa, Takuji; Hara, Yousuke; Mizushima, Kota; Tansho, Ryohei; Saraya, Yuichi; Shirai, Toshiyuki; Noda, Koji

    2016-01-01

    Purpose: Three-dimensional irradiation with a scanned carbon-ion beam has been performed from 2011 at the authors’ facility. The authors have developed the rotating-gantry equipped with the scanning irradiation system. The number of combinations of beam properties to measure for the commissioning is more than 7200, i.e., 201 energy steps, 3 intensities, and 12 gantry angles. To compress the commissioning time, quick and simple range verification system is required. In this work, the authors develop a quick range verification system using scintillator and charge-coupled device (CCD) camera and estimate the accuracy of the range verification. Methods: A cylindrical plastic scintillator block and a CCD camera were installed on the black box. The optical spatial resolution of the system is 0.2 mm/pixel. The camera control system was connected and communicates with the measurement system that is part of the scanning system. The range was determined by image processing. Reference range for each energy beam was determined by a difference of Gaussian (DOG) method and the 80% of distal dose of the depth-dose distribution that were measured by a large parallel-plate ionization chamber. The authors compared a threshold method and a DOG method. Results: The authors found that the edge detection method (i.e., the DOG method) is best for the range detection. The accuracy of range detection using this system is within 0.2 mm, and the reproducibility of the same energy measurement is within 0.1 mm without setup error. Conclusions: The results of this study demonstrate that the authors’ range check system is capable of quick and easy range verification with sufficient accuracy.

  7. Invention note and patent note

    International Nuclear Information System (INIS)

    Chang, Sung Su

    1997-09-01

    This book deals with origin of invention and term related patent and invention, making idea, brain storming, 10 laws of invention skill, attitude of inventors, invention order, making good inventions, patent system, preparation of application, procedure and method of patent, management of patent, patent and trademark office, patent lawyer, copyright, new intellectual property right, industrial property right, trademark, invasion of industrial property right, patent, Judgment, preparation of items, application of industrial property right and effect of inventor and related people.

  8. Community assessment in a suburban Hispanic community: a description of method.

    Science.gov (United States)

    Ludwig-Beymer, P; Blankemeier, J R; Casas-Byots, C; Suarez-Balcazar, Y

    1996-01-01

    The Hispanic population is growing rapidly and is composed of individuals from many countries with varying levels of acculturation, education, income, and citizenship status. The Genesis Health and Empowerment Program was developed locally in 1993 to improve the health status of Hispanics living in Des Plaines, Illinois, USA. Understanding the quality of life and its cultural patterning for the community is an essential aspect of planning and implementing a health care delivery program. Using Leininger's Theory of Culture Care: Diversity and Universality as a framework, adapted the Concerns Report Method was essential for data collection. This paper describes the method used for learning about the Hispanic community. Steps included conducting three focus groups, constructing a structured interview guide, collecting data, analyzing data, and reporting the findings to the community. Some very preliminary findings are presented and implications for transcultural health care are described.

  9. Description of a double centrifugation tube method for concentrating canine platelets

    OpenAIRE

    Perazzi, Anna; Busetto, Roberto; Martinello, Tiziana; Drigo, Michele; Pasotto, Daniela; Cian, Francesco; Patruno, Marco; Iacopetti, Ilaria

    2013-01-01

    Background To evaluate the efficiency of platelet-rich plasma preparations by means of a double centrifugation tube method to obtain platelet-rich canine plasma at a concentration at least 4 times higher than the baseline value and a concentration of white blood cells not exceeding twice the reference range. A complete blood count was carried out for each sample and each concentrate. Whole blood samples were collected from 12 clinically healthy dogs (consenting blood donors). Blood was proces...

  10. Highly Accurate Tree Models Derived from Terrestrial Laser Scan Data: A Method Description

    Directory of Open Access Journals (Sweden)

    Jan Hackenberg

    2014-05-01

    Full Text Available This paper presents a method for fitting cylinders into a point cloud, derived from a terrestrial laser-scanned tree. Utilizing high scan quality data as the input, the resulting models describe the branching structure of the tree, capable of detecting branches with a diameter smaller than a centimeter. The cylinders are stored as a hierarchical tree-like data structure encapsulating parent-child neighbor relations and incorporating the tree’s direction of growth. This structure enables the efficient extraction of tree components, such as the stem or a single branch. The method was validated both by applying a comparison of the resulting cylinder models with ground truth data and by an analysis between the input point clouds and the models. Tree models were accomplished representing more than 99% of the input point cloud, with an average distance from the cylinder model to the point cloud within sub-millimeter accuracy. After validation, the method was applied to build two allometric models based on 24 tree point clouds as an example of the application. Computation terminated successfully within less than 30 min. For the model predicting the total above ground volume, the coefficient of determination was 0.965, showing the high potential of terrestrial laser-scanning for forest inventories.

  11. Description of a method of control for glass lenses used as a protection medium against radiation

    International Nuclear Information System (INIS)

    Alonso, J.V.S.; Torio, P.P.

    1977-01-01

    The control of ocular protection medium which is normally used by workers, finds itself confronted by unsurmountable difficulties. Transmission determination needs fine glass lenses, extrapolating the values obtained to the real value of the medium used. The degree of protection required of the glass used by workers has been determined using successive approximations. The work method is quick and simple, and the apparatus used is within the reach of any medium sized laboratory. A theoretical justification has been made of the fundamental principles of the method; for example, the protective power of various filter lenses used by workers in this country has been determined. The method has been centred on the possibility of its practical application. The results obtained are interpreted taking into consideration a possible emissing source, and their discussion is based on prevailing standards which exist in most European countries. The control carried out has allowed to state that in most cases the protection medium used is not adequate, owing to a poor selection or an inadequate maintenance

  12. Books Noted

    Science.gov (United States)

    Walsh, Edward J.

    1999-09-01

    Atmospheric Chemistry and Global Change Guy P. Brasseur, John J. Orlando, and Geoffrey S. Tyndall, Eds. Oxford University Press: New York, 1999. xviii + 654 pp. ISBN 0-19-510521-4. 70.00. Advances in Supramolecular Chemistry, Vol. 5 George W. Gokel, Ed. JAI Press: Stamford, CT, 1999. ix + 654 pp. ISBN 1-7623-0447-2. 109.50. Advances in Cycloaddition, Vol. 5 Michael Harmata, Ed. JAI Press: Stamford, CT, 1999. ix + 172 pp. ISBN 0-7623-0346-8. 109.50. Characterization of Powders and Aerosols Brian H. Kaye. Wiley-VCH: New York, 1999. xi + 312 pp. ISBN 3-527-28853-8. 205.00. Chemometrics M. Otto. Wiley-VCH: New York, 1999. xvi + 314 pp. ISBN 3-527-29628-x. 69.95. Flow Measurement Methods and Applications Jim E. Hardy, Jim O. Hylton, Tim E. McKnight, C. J. Remenyik, and Frances R. Ruppel. Wiley-Interscience: New York, 1999. ix + 254 pp. ISBN 0-471-24509-7. 79.95. Tailored Polymeric Materials for Controlled Delivery Systems Iain McCulloch and Shalaby W. Shalaby, Eds. ACS Symposium Series 709. Oxford University Press: New York, 1998. xi + 324 pp. ISBN 0-8412-3585-6. 115.00. Chemistry, 7th Edition Karen C. Timberlake. Addison Wesley Longman: Menlo Park, CA, 1999. xxviii + 740 pp. ISBN 0-321-03767-7. 72.19. General Chemistry, 2nd Edition John W. Hill and Ralph H. Petrucci. Prentice Hall: Upper Saddle River, NJ. 1999. xxvi + 1088 pp + appendix and index. ISBN 0-13-010318-7. $97.00.

  13. Alternative methods for dispoal of low-level radioactive wastes. Task 1. Description of methods and assessment of criteria

    International Nuclear Information System (INIS)

    Bennett, R.D.; Miller, W.O.; Warriner, J.B.; Malone, P.G.; McAneny, C.C.

    1984-04-01

    The study reported herein contains the results of Task 1 of a four-task study entitled Criteria for Evaluating Engineered Facilities. The overall objective of this study is to ensure that the criteria needed to evaluate five alternative low-level radioactive waste (LLW) disposal methods are available to the Nuclear Regulatory Commission (NRC) and the Agreement States. The alternative methods considered are belowground vaults, aboveground vaults, earth mounded concrete bunkers, mined cavities, and augered holes. Each of these alternatives is either being used by other countries for low-level radioactive waste (LLW) disposal or is being considered by other countries or US agencies. In this report the performance requirements are listed, each alternative is described, the experience gained with its use is discussed, and the performance capabilities of each method are addressed. Next, the existing 10 CFR Part 61 Subpart D criteria with respect to paragraphs 61.50 through 61.53, pertaining to site suitability, design, operations and closure, and monitoring are assessed for applicability to evaluation of each alternative. Preliminary conclusions and recommendations are offered on each method's suitability as an LLW disposal alternative, the applicability of the criteria, and the need for supplemental or modified criteria

  14. Note: An online testing method for lifetime projection of high power light-emitting diode under accelerated reliability test.

    Science.gov (United States)

    Chen, Qi; Chen, Quan; Luo, Xiaobing

    2014-09-01

    In recent years, due to the fast development of high power light-emitting diode (LED), its lifetime prediction and assessment have become a crucial issue. Although the in situ measurement has been widely used for reliability testing in laser diode community, it has not been applied commonly in LED community. In this paper, an online testing method for LED life projection under accelerated reliability test was proposed and the prototype was built. The optical parametric data were collected. The systematic error and the measuring uncertainty were calculated to be within 0.2% and within 2%, respectively. With this online testing method, experimental data can be acquired continuously and sufficient amount of data can be gathered. Thus, the projection fitting accuracy can be improved (r(2) = 0.954) and testing duration can be shortened.

  15. Editor's Note

    Directory of Open Access Journals (Sweden)

    Daniel Shanahan

    2016-07-01

    Full Text Available CORPUS studies have increasingly been of interest to music theorists, musicologists, and music psychology researchers, as is evident in the sheer number of excellent submissions to this special issue. The breadth and depth of these articles, as well as the insightful commentaries, make it seem only fitting to publish over two issues. The current issue contains five articles, eight commentaries, and one research report, and covers folk music, post-tonal music, jazz, Western art music, and the popular music found on Youtube. Eerola presents a model of melodic entropy that provides a nice framework for future information-theoretic work, while Roger Dean and Marcus Pearce present a new approach to modelling pitch-structure in post-tonal music. Frieler, Pfleiderer, Abeßer, and Zaddach give an analysis of jazz solos that demonstrates the role of a narrative arcs in improvisation. White and Quinn present a new corpus that makes use of vast compilations of web-based MIDI data, and demonstrates how such a corpus might be facilitate future musicological and music-theoretic research. Plazak focuses on Youtube as a corpus, and argues that the mutability of such a corpus facilitates our understanding of musical communication, as well as the important role of the listener in defining and re-defining such a dataset. It's encouraging to me both as an editor and practitioner of corpus methods that so many of those heavily involved with the field contributed to these two issues as either an author or a commentator. This issue also brings a number of changes on other fronts. Firstly, Nicola Dibben and Renee Timmers, who served as the journal's editors since Volume 7, have completed their editorial terms. They oversaw the transformation of the journal into a new Open Journal Systems platform, and were able to consistently produce issues that set a very high standard. Under their leadership, the journal both increased its accessibility (we now average more than 1

  16. JIS Z 3105 (methods of radiographic test and classification of radiographs for aluminium welds) and its explanatory note

    International Nuclear Information System (INIS)

    Senda, Tomio

    1977-01-01

    The paragraphs of JIS Z 3105 revised in 1977 are explained, and the problems that were examined by the special committee before the JIS Z 3105 is put in force are reviewed. The JIS Z 3105 consists of a general rule, a method of radiography, a method of classification of the radiographs, and recording. The main problems which were examined are as follows: The radiation penetration testing method of a circumferencial welding portion of a tube was included in the old specifications JIS Z 3105 (1973), but it is excluded in the new specifications, because another specification JIS Z 3108 was established. The gradation meters of D1, D2, D3 and D4 types are added to the gradation meters of the existing A and B types. A restriction in accordance with both focusing dimension and thickness of the welded material is provided between a distance between the focal point and the penetrometer and a distance between the penetrometer and the film. Radiograph concentration of parts other than the penetrometer discrimination and defects of a testing part are specified in accordance with thickness of the base metal. Inclusion of copper and copper oxides are added to the blowholes, the inclusions, cracks, bad penetration and bad fusion as defects for classifying gradation. The gradation of the revised JIS is classified into four grades in lieu of the old three grades. (Iwakiri, K.)

  17. Relationship between quantitative and descriptive methods of studying blood flow through intrapulmonary arteriovenous anastomoses during exercise.

    Science.gov (United States)

    Duke, Joseph W; Elliott, Jonathan E; Laurie, Steven S; Voelkel, Thomas; Gladstone, Igor M; Fish, Mathews B; Lovering, Andrew T

    2017-09-01

    Several methods exist to study intrapulmonary arteriovenous anastomoses (IPAVA) in humans. Transthoracic saline contrast echocardiography (TTSCE), i.e., bubble scores, is minimally-invasive, but cannot be used to quantify the magnitude of blood flow through IPAVA (Q IPAVA ). Radiolabeled macroaggregates of albumin ( 99m Tc-MAA) have been used to quantify Q IPAVA in humans, but this requires injection of radioactive particles. Previous work has shown agreement between 99m Tc-MAA and TTSCE, but this has not been tested simultaneously in the same group of subjects. Thus, the purpose of this study was to determine if there was a relationship between Q IPAVA quantified with 99m Tc-MAA and bubble scores obtained with TTSCE. To test this, we used 99m Tc-MAA and TTSCE to quantify and detect Q IPAVA at rest and during exercise in humans. Q IPAVA significantly increased from rest to exercise using 99m Tc-MAA and TTSCE and there was a moderately-strong, but significant relationship between methods. Our data suggest that high bubble scores generally correspond with large Q IPAVA quantified with 99m Tc-MAA during exercise. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Technical Note: Motion-perturbation method applied to dosimetry of dynamic MLC target tracking—A proof-of-concept

    Energy Technology Data Exchange (ETDEWEB)

    Feygelman, Vladimir, E-mail: vladimir.feygelman@moffitt.org; Tonner, Brian; Hunt, Dylan; Zhang, Geoffrey; Moros, Eduardo [Department of Radiation Oncology, Moffitt Cancer Center, Tampa, Florida 33612 (United States); Stambaugh, Cassandra [Department of Physics, University of South Florida, Tampa, Florida 33612 (United States); Nelms, Benjamin E. [Canis Lupus LLC, Merrimac, Wisconsin 53561 (United States)

    2015-11-15

    Purpose: Previous studies show that dose to a moving target can be estimated using 4D measurement-guided dose reconstruction based on a process called virtual motion simulation, or VMS. A potential extension of VMS is to estimate dose during dynamic multileaf collimator (MLC)-tracking treatments. The authors introduce a modified VMS method and quantify its performance as proof-of-concept for tracking applications. Methods: Direct measurements with a moving biplanar diode array were used to verify accuracy of the VMS dose estimates. A tracking environment for variably sized circular MLC apertures was simulated by sending preprogrammed control points to the MLC while simultaneously moving the accelerator treatment table. Sensitivity of the method to simulated tracking latency (0–700 ms) was also studied. Potential applicability of VMS to fast changing beam apertures was evaluated by modeling, based on the demonstrated dependence of the cumulative dose on the temporal dose gradient. Results: When physical and virtual latencies were matched, the agreement rates (2% global/2 mm gamma) between the VMS and the biplanar dosimeter were above 96%. When compared to their own reference dose (0 induced latency), the agreement rates for VMS and biplanar array track closely up to 200 ms of induced latency with 10% low-dose cutoff threshold and 300 ms with 50% cutoff. Time-resolved measurements suggest that even in the modulated beams, the error in the cumulative dose introduced by the 200 ms VMS time resolution is not likely to exceed 0.5%. Conclusions: Based on current results and prior benchmarks of VMS accuracy, the authors postulate that this approach should be applicable to any MLC-tracking treatments where leaf speeds do not exceed those of the current Varian accelerators.

  19. Technical note: a method to quantify prolamin proteins in corn that are negatively related to starch digestibility in ruminants.

    Science.gov (United States)

    Larson, J; Hoffman, P C

    2008-12-01

    Compared with floury or high-moisture corns, dry corn with a greater percentage of vitreous endosperm has been demonstrated to be negatively related to starch digestibility and milk yield of lactating dairy cows. Starch granules in corn are encapsulated by hydrophobic prolamin proteins that are innately insoluble in the rumen environment. Corn prolamin proteins are named zein, and laboratory methods to quantify zein exist but are seldom employed in ruminant nutrition because of their arduous nature. In this study, advances in cereal chemistry were combined with rapid turbidimetric methods yielding a modified turbidimetric zein method (mTZM) to quantify zein in whole corn. Ten dry corns containing unique endosperms were evaluated using the mTZM. Corns with flint, dent, floury, or opaque endosperms were found to contain 19.3, 11.3, 5.8, and 4.9 g of zein/100 g of starch, respectively. The ability of mTZM to differentiate corn endosperm types as defined by least significant difference was 2.6 g of zein/100 g of starch. Ten high-moisture corns of varying moisture content were also evaluated using the mTZM. Zein content of high-moisture corns as defined by mTZM ranged from 8.3 to 2.8 g of zein/100 g of starch with a least significant difference of 1.2 g of zein/100 g of starch. The mTZM determined that zein contents of high-moisture, floury, and opaque corns were markedly less than those of flint and dent dry corns, indicating that mTZM has the ability to quantify starch granule encapsulation by hydrophobic prolamin proteins in whole corn.

  20. Technical Note: Motion-perturbation method applied to dosimetry of dynamic MLC target tracking—A proof-of-concept

    International Nuclear Information System (INIS)

    Feygelman, Vladimir; Tonner, Brian; Hunt, Dylan; Zhang, Geoffrey; Moros, Eduardo; Stambaugh, Cassandra; Nelms, Benjamin E.

    2015-01-01

    Purpose: Previous studies show that dose to a moving target can be estimated using 4D measurement-guided dose reconstruction based on a process called virtual motion simulation, or VMS. A potential extension of VMS is to estimate dose during dynamic multileaf collimator (MLC)-tracking treatments. The authors introduce a modified VMS method and quantify its performance as proof-of-concept for tracking applications. Methods: Direct measurements with a moving biplanar diode array were used to verify accuracy of the VMS dose estimates. A tracking environment for variably sized circular MLC apertures was simulated by sending preprogrammed control points to the MLC while simultaneously moving the accelerator treatment table. Sensitivity of the method to simulated tracking latency (0–700 ms) was also studied. Potential applicability of VMS to fast changing beam apertures was evaluated by modeling, based on the demonstrated dependence of the cumulative dose on the temporal dose gradient. Results: When physical and virtual latencies were matched, the agreement rates (2% global/2 mm gamma) between the VMS and the biplanar dosimeter were above 96%. When compared to their own reference dose (0 induced latency), the agreement rates for VMS and biplanar array track closely up to 200 ms of induced latency with 10% low-dose cutoff threshold and 300 ms with 50% cutoff. Time-resolved measurements suggest that even in the modulated beams, the error in the cumulative dose introduced by the 200 ms VMS time resolution is not likely to exceed 0.5%. Conclusions: Based on current results and prior benchmarks of VMS accuracy, the authors postulate that this approach should be applicable to any MLC-tracking treatments where leaf speeds do not exceed those of the current Varian accelerators

  1. Technical Note: Validation of two methods to determine contact area between breast and compression paddle in mammography.

    Science.gov (United States)

    Branderhorst, Woutjan; de Groot, Jerry E; van Lier, Monique G J T B; Highnam, Ralph P; den Heeten, Gerard J; Grimbergen, Cornelis A

    2017-08-01

    To assess the accuracy of two methods of determining the contact area between the compression paddle and the breast in mammography. An accurate method to determine the contact area is essential to accurately calculate the average compression pressure applied by the paddle. For a set of 300 breast compressions, we measured the contact areas between breast and paddle, both capacitively using a transparent foil with indium-tin-oxide (ITO) coating attached to the paddle, and retrospectively from the obtained mammograms using image processing software (Volpara Enterprise, algorithm version 1.5.2). A gold standard was obtained from video images of the compressed breast. During each compression, the breast was illuminated from the sides in order to create a dark shadow on the video image where the breast was in contact with the compression paddle. We manually segmented the shadows captured at the time of x-ray exposure and measured their areas. We found a strong correlation between the manual segmentations and the capacitive measurements [r = 0.989, 95% CI (0.987, 0.992)] and between the manual segmentations and the image processing software [r = 0.978, 95% CI (0.972, 0.982)]. Bland-Altman analysis showed a bias of -0.0038 dm 2 for the capacitive measurement (SD 0.0658, 95% limits of agreement [-0.1329, 0.1252]) and -0.0035 dm 2 for the image processing software [SD 0.0962, 95% limits of agreement (-0.1921, 0.1850)]. The size of the contact area between the paddle and the breast can be determined accurately and precisely, both in real-time using the capacitive method, and retrospectively using image processing software. This result is beneficial for scientific research, data analysis and quality control systems that depend on one of these two methods for determining the average pressure on the breast during mammographic compression. © 2017 Sigmascreening B.V. Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  2. Technical Note: Measuring contrast- and noise-dependent spatial resolution of an iterative reconstruction method in CT using ensemble averaging

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Lifeng, E-mail: yu.lifeng@mayo.edu; Vrieze, Thomas J.; Leng, Shuai; Fletcher, Joel G.; McCollough, Cynthia H. [Department of Radiology, Mayo Clinic, Rochester, Minnesota 55905 (United States)

    2015-05-15

    Purpose: The spatial resolution of iterative reconstruction (IR) in computed tomography (CT) is contrast- and noise-dependent because of the nonlinear regularization. Due to the severe noise contamination, it is challenging to perform precise spatial-resolution measurements at very low-contrast levels. The purpose of this study was to measure the spatial resolution of a commercially available IR method using ensemble-averaged images acquired from repeated scans. Methods: A low-contrast phantom containing three rods (7, 14, and 21 HU below background) was scanned on a 128-slice CT scanner at three dose levels (CTDI{sub vol} = 16, 8, and 4 mGy). Images were reconstructed using two filtered-backprojection (FBP) kernels (B40 and B20) and a commercial IR method (sinogram affirmed iterative reconstruction, SAFIRE, Siemens Healthcare) with two strength settings (I40-3 and I40-5). The same scan was repeated 100 times at each dose level. The modulation transfer function (MTF) was calculated based on the edge profile measured on the ensemble-averaged images. Results: The spatial resolution of the two FBP kernels, B40 and B20, remained relatively constant across contrast and dose levels. However, the spatial resolution of the two IR kernels degraded relative to FBP as contrast or dose level decreased. For a given dose level at 16 mGy, the MTF{sub 50%} value normalized to the B40 kernel decreased from 98.4% at 21 HU to 88.5% at 7 HU for I40-3 and from 97.6% to 82.1% for I40-5. At 21 HU, the relative MTF{sub 50%} value decreased from 98.4% at 16 mGy to 90.7% at 4 mGy for I40-3 and from 97.6% to 85.6% for I40-5. Conclusions: A simple technique using ensemble averaging from repeated CT scans can be used to measure the spatial resolution of IR techniques in CT at very low contrast levels. The evaluated IR method degraded the spatial resolution at low contrast and high noise levels.

  3. Books Noted

    Science.gov (United States)

    Walsh, Edward J.

    1999-10-01

    Chemistry: Cambridge, UK. 1999. xx + 466 pp. ISBN 0-85404-594-5. £32.00. Advances in Dendritic Macromolecules, Vol. 4 George R. Newkome, Ed. JAI Press: Stamford, CT, 1999. x + 207 pp. ISBN 0-7623-0347-6. 109.50. Advances in Quantitative Structure-Property Relationships, Vol. 2 Marvin Charton. JAI Press: Stamford, CT, 1999. ix + 257 pp. ISBN 0-7623-0067-1. 109.50. Pesticide Residues in Foods: Methods, Techniques, and Regulations W. George Fong, H. Anson Moye, James N. Seiber, and John P. Toth. Chemical Analysis, Vol. 151.Wiley-Interscience: New York, 1999. xiv + 358 pp. ISBN 0-471-57400-7. $84.95.

  4. [Treatment and personality development with art therapy. A description of the method].

    Science.gov (United States)

    Antalfai, Márta

    2007-01-01

    Composition as a creative form of self-expression plays an important role not only in maintaining health, but also in gaining insight into the healthy personality and in the definition of this category. It seems nowadays that psychology has collected more information on the pathological personality than on the healthy one. Therefore, different workshops of art therapy are also scenes of a "spiritual alchemy" because they can give a deeper insight into the personality in addition to the primary aim of treatment. The method of the thematic art psychotherapy based on catharsis-experience is based on analytical psychology and on analytically oriented group-therapy. The aim is to generate artificial catharsis-experiences employing the impressive forces of poems, music compositions in order to raise the unconscious or the partly experienced partner-conflicts to the surface, which could manifest themselves in the process of the creative work and could be elaborated in group-activity. The creative process (specially adapted art techniques) provides good opportunities for patients to depict their traumas and complexes and also to resolve them involving the whole personality and not only at a cognitive level. The method, tuned to the workings of nature, helps the personality to develop the emotional and volitional segments, the sensitive and empathetic capabilities, as well as the recognition skills of consciousness. In the therapeutic process, the work of art that is created holds a mirror to the creator, offering to him or her the opportunity to face the real complex at the background the actual conflict. The method aims to achieve a reconstruction of psychic dynamics in two ways. The first is an emotional resonance to the changes of nature, of the year and of the feasts, in which the psychic process starts from inside to the direction of the outside world (psychic enrichment and accomodation). The second way leads from the outer world to the inner one and this psychic

  5. Cardiac dimensional analysis by use of biplane cineradiography: description and validation of method.

    Science.gov (United States)

    Lipscomb, K

    1980-01-01

    Biplane cineradiography is a potentially powerful tool for precise measurement of intracardiac dimensions. The most systematic approach to these measurements is the creation of a three-dimensional coordinate system within the x-ray field. Using this system, interpoint distances, such as between radiopaque clips or coronary artery bifurcations, can be calculated by use of the Pythagoras theorem. Alternatively, calibration factors can be calculated in order to determine the absolute dimensions of a structure, such as a ventricle or coronary artery. However, cineradiography has two problems that have precluded widespread use of the system. These problems are pincushion distortion and variable image magnification. In this paper, methodology to quantitate and compensate for these variables is presented. The method uses radiopaque beads permanently mounted in the x-ray field. The position of the bead images on the x-ray film determine the compensation factors. Using this system, measurements are made with a standard deviation of approximately 1% of the true value.

  6. The INTERPHONE study: design, epidemiological methods, and description of the study population

    DEFF Research Database (Denmark)

    Cardis, Elisabeth; Richardson, Lesley; Deltour, Isabelle

    2007-01-01

    . This paper describes the study design and methods and the main characteristics of the study population. INTERPHONE is the largest case-control study to date investigating risks related to mobile phone use and to other potential risk factors for the tumours of interest and includes 2,765 glioma, 2......The very rapid worldwide increase in mobile phone use in the last decade has generated considerable interest in the possible health effects of exposure to radio frequency (RF) fields. A multinational case-control study, INTERPHONE, was set-up to investigate whether mobile phone use increases...... the risk of cancer and, more specifically, whether the RF fields emitted by mobile phones are carcinogenic. The study focused on tumours arising in the tissues most exposed to RF fields from mobile phones: glioma, meningioma, acoustic neurinoma and parotid gland tumours. In addition to a detailed history...

  7. On some descriptive and predictive methods for the dynamics of cancer growth

    Directory of Open Access Journals (Sweden)

    Iulian T. Vlad

    2015-09-01

    Full Text Available Cancer is a widely spread disease that affects a large proportion of the human population, and many research teams are developing algorithms to help medics to understand this disease. In particular, tumor growth has been studied from different viewpoints and several mathematical models have been proposed. In this paper, we review a set of comprehensive and modern tools that are useful for prediction of cancer growth in space and time. We comment on three alternative approaches. We first consider spatio-temporal stochastic processes within a Bayesian framework to model spatial heterogeneity, temporal dependence and spatio-temporal interactions amongst the pixels, providing a general modeling framework for such dynamics. We then consider predictions based on geometric properties of plane curves and vectors, and propose two methods of geometric prediction. Finally we focus on functional data analysis to statistically compare tumor contour evolutions. We also analyze real data on brain tumor.

  8. MATADOR (Methods for the Analysis of Transport And Deposition Of Radionuclides) code description and User's Manual

    International Nuclear Information System (INIS)

    Avci, H.I.; Raghuram, S.; Baybutt, P.

    1985-04-01

    A new computer code called MATADOR (Methods for the Analysis of Transport And Deposition Of Radionuclides) has been developed to replace the CORRAL-2 computer code which was written for the Reactor Safety Study (WASH-1400). This report is a User's Manual for MATADOR. MATADOR is intended for use in system risk studies to analyze radionuclide transport and deposition in reactor containments. The principal output of the code is information on the timing and magnitude of radionuclide releases to the environment as a result of severely degraded core accidents. MATADOR considers the transport of radionuclides through the containment and their removal by natural deposition and by engineered safety systems such as sprays. It is capable of analyzing the behavior of radionuclides existing either as vapors or aerosols in the containment. The code requires input data on the source terms into the containment, the geometry of the containment, and thermal-hydraulic conditions in the containment

  9. Description of a teaching method for research education for palliative care healthcare professionals.

    Science.gov (United States)

    Rhondali, Wadih; Nguyen, Linh My Thi; Peck, Michelle; Vallet, Fabienne; Daneault, Serge; Filbet, Marilene

    2015-04-01

    Despite the rapidly growing availability of palliative care services, there is still much to be done in order to better support clinicians who are starting research programs. Among the barriers identified in the literature, methodological issues and lack of research training programs are often reported. Our aim was to describe an educational research method for healthcare professionals working in palliative care and to report the result of a survey conducted among a three-year sample of students. The course was provided for a multidisciplinary group and was open to all healthcare professionals involved in palliative care. It took place over a single session during a full day. We used a 20-question e-survey to assess student outcomes (e.g., satisfaction, current status of their project). We received answers from 83 of the 119 students (70%) who took the course. The majority were physicians (n = 62, 75%), followed by nurses (n = 17, 21%). During the class, students assessed the role of the teacher as an information provider (n = 51, 61%), role model (n = 36, 43%), and facilitator (n = 33, 40%), and considered all of these roles as suitable, with a score of 3.9-4.7 out of 5. Participants reported a high level of support from the teacher, with a mean score of 8.2 (SD, 1.7) out of 10, and good overall satisfaction with a mean score of 7.6 (1.8). Finally, 51 participants (77%) were able to start their research project after the class, 27 (41%) to complete it, and 8 (12%) to submit their research to a journal or conference. Our results suggest that newer teaching methods such as roleplay, group work, and target acquisition are feasible and effective in a palliative research curriculum. Additional studies are needed to confirm the objective outputs of educational interventions, including research outputs.

  10. Chemical abundances of fast-rotating massive stars. I. Description of the methods and individual results

    Science.gov (United States)

    Cazorla, Constantin; Morel, Thierry; Nazé, Yaël; Rauw, Gregor; Semaan, Thierry; Daflon, Simone; Oey, M. S.

    2017-07-01

    Aims: Recent observations have challenged our understanding of rotational mixing in massive stars by revealing a population of fast-rotating objects with apparently normal surface nitrogen abundances. However, several questions have arisen because of a number of issues, which have rendered a reinvestigation necessary; these issues include the presence of numerous upper limits for the nitrogen abundance, unknown multiplicity status, and a mix of stars with different physical properties, such as their mass and evolutionary state, which are known to control the amount of rotational mixing. Methods: We have carefully selected a large sample of bright, fast-rotating early-type stars of our Galaxy (40 objects with spectral types between B0.5 and O4). Their high-quality, high-resolution optical spectra were then analysed with the stellar atmosphere modelling codes DETAIL/SURFACE or CMFGEN, depending on the temperature of the target. Several internal and external checks were performed to validate our methods; notably, we compared our results with literature data for some well-known objects, studied the effect of gravity darkening, or confronted the results provided by the two codes for stars amenable to both analyses. Furthermore, we studied the radial velocities of the stars to assess their binarity. Results: This first part of our study presents our methods and provides the derived stellar parameters, He, CNO abundances, and the multiplicity status of every star of the sample. It is the first time that He and CNO abundances of such a large number of Galactic massive fast rotators are determined in a homogeneous way. Based on observations obtained with the Heidelberg Extended Range Optical Spectrograph (HEROS) at the Telescopio Internacional de Guanajuato (TIGRE) with the SOPHIE échelle spectrograph at the Haute-Provence Observatory (OHP; Institut Pytheas; CNRS, France), and with the Magellan Inamori Kyocera Echelle (MIKE) spectrograph at the Magellan II Clay telescope

  11. Miller Early Childhood Sustained Home-visiting (MECSH trial: design, method and sample description

    Directory of Open Access Journals (Sweden)

    Anderson Teresa

    2008-12-01

    Full Text Available Abstract Background Home visiting programs comprising intensive and sustained visits by professionals (usually nurses over the first two years of life show promise in promoting child health and family functioning, and ameliorating disadvantage. Australian evidence of the effectiveness of sustained nurse home visiting in early childhood is limited. This paper describes the method and cohort characteristics of the first Australian study of sustained home visiting commencing antenatally and continuing to child-age two years for at-risk mothers in a disadvantaged community (the Miller Early Childhood Sustained Home-visiting trial. Methods and design Mothers reporting risks for poorer parenting outcomes residing in an area of socioeconomic disadvantage were recruited between February 2003 and March 2005. Mothers randomised to the intervention group received a standardised program of nurse home visiting. Interviews and observations covering child, maternal, family and environmental issues were undertaken with mothers antenatally and at 1, 12 and 24 months postpartum. Standardised tests of child development and maternal-child interaction were undertaken at 18 and 30 months postpartum. Information from hospital and community heath records was also obtained. Discussion A total of 338 women were identified and invited to participate, and 208 were recruited to the study. Rates of active follow-up were 86% at 12 months, 74% at 24 months and 63% at 30 months postpartum. Participation in particular data points ranged from 66% at 1 month to 51% at 24 months postpartum. Rates of active follow-up and data point participation were not significantly different for the intervention or comparison group at any data point. Mothers who presented for antenatal care prior to 20 weeks pregnant, those with household income from full-time employment and those who reported being abused themselves as a child were more likely to be retained in the study. The Miller Early

  12. The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

    Science.gov (United States)

    Oemler Jr., Augustus; Dressler, Alan; Gladders, Michael G.; Rigby, Jane R.; Bai, Lei; Kelson, Daniel; Villanueva, Edward; Fritz, Jacopo; Rieke, George; Poggianti, Bianca M.; hide

    2013-01-01

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines.With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  13. Gold Bead Implantation in Acupoints for Coxofemoral Arthrosis in Dogs: Method Description and Adverse Effects

    Directory of Open Access Journals (Sweden)

    Lars Moe

    2012-09-01

    Full Text Available Gold bead implantation has been used for years as an alternative method to improve function in chronic joint disease both in humans and dogs. The aims of the present study were to describe the technique of implanting 24-karat gold beads around the hip joints of dogs with chronic hip dysplasia, and to record any side effects or complications of such treatment. A prospective placebo-controlled double-blinded clinical trial was performed. Eighty dogs were randomly allocated to treatment or placebo, with 38 in the gold implantation group and 42 in the placebo group, and followed intensely for six months. The implantation technique was simple to perform, using fluoroscopy and with the dogs under inhalation anesthesia for about 30 minutes. Adverse effects, measured as pain or discomfort, were seen for a period of up to four weeks in 15 of the dogs in the gold implantation group, compared to six dogs in the placebo group. During implantation, a technical difficulty occurred as 82% of the dogs showed leakage of blood and/or synovia from the needles. The dogs in the gold implantation group were radiographed 18 months later. Of the 30 dogs that were radiographed at both inclusion and 24 months, 80% (24 dogs showed a deterioration of the coxofemoral arthrosis, the other six had stable disease evaluated by radiography. Migration of gold beads was only observed in one dog.

  14. Digital quantification of fibrosis in liver biopsy sections: description of a new method by Photoshop software.

    Science.gov (United States)

    Dahab, Gamal M; Kheriza, Mohamed M; El-Beltagi, Hussien M; Fouda, Abdel-Motaal M; El-Din, Osama A Sharaf

    2004-01-01

    The precise quantification of fibrous tissue in liver biopsy sections is extremely important in the classification, diagnosis and grading of chronic liver disease, as well as in evaluating the response to antifibrotic therapy. Because the recently described methods of digital image analysis of fibrosis in liver biopsy sections have major flaws, including the use of out-dated techniques in image processing, inadequate precision and inability to detect and quantify perisinusoidal fibrosis, we developed a new technique in computerized image analysis of liver biopsy sections based on Adobe Photoshop software. We prepared an experimental model of liver fibrosis involving treatment of rats with oral CCl4 for 6 weeks. After staining liver sections with Masson's trichrome, a series of computer operations were performed including (i) reconstitution of seamless widefield images from a number of acquired fields of liver sections; (ii) image size and solution adjustment; (iii) color correction; (iv) digital selection of a specified color range representing all fibrous tissue in the image and; (v) extraction and calculation. This technique is fully computerized with no manual interference at any step, and thus could be very reliable for objectively quantifying any pattern of fibrosis in liver biopsy sections and in assessing the response to antifibrotic therapy. It could also be a valuable tool in the precise assessment of antifibrotic therapy to other tissue regardless of the pattern of tissue or fibrosis.

  15. THE IMACS CLUSTER BUILDING SURVEY. I. DESCRIPTION OF THE SURVEY AND ANALYSIS METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Oemler, Augustus Jr.; Dressler, Alan; Kelson, Daniel; Villanueva, Edward [Observatories of the Carnegie Institution for Science, 813 Santa Barbara St., Pasadena, CA 91101-1292 (United States); Gladders, Michael G. [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States); Rigby, Jane R. [Observational Cosmology Lab, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Bai Lei [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H4 (Canada); Fritz, Jacopo [Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281 S9, B-9000 Gent (Belgium); Rieke, George [Steward Observatory, University of Arizona, Tucson, AZ 8572 (United States); Poggianti, Bianca M.; Vulcani, Benedetta, E-mail: oemler@obs.carnegiescience.edu [INAF-Osservatorio Astronomico di Padova, Vicolo dell' Osservatorio 5, I-35122 Padova (Italy)

    2013-06-10

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines. With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  16. Use of antimicrobial drugs in general hospitals. I. Description of population and definition of methods.

    Science.gov (United States)

    Townsend, T R; Shapiro, M; Rosner, B; Kass, E H

    1979-06-01

    The patterns of use of antimicrobial drugs in a random sample of general hosptials in Pennsylvania were studied. The sample was tested for validity, and all deaths and discharges were analyzed for 10 random days drawn across the year spanning July 1973 to June 1974. Methods were developed for abstracting the hospital records and for determining the reproducibility of the findings of the physician and nonphysician chart reviewers. More than 99% of the requested charts were available. In the 5,288 charts reviewed, most of the required data were readily available. The study population was 84% white and 58% female; most patients were in hospitals that had more than 300 beds and that were located in towns with populations of greater than 10,000. In 41% of the 2,070 antimicrobial courses administered to almost 30% of the patients, an explicit clinical statement of why the drug was being given could be found in the chart. The information for review was found in clinical charts, but in half of the charts, the information required was not on face sheets and discharge summaries.

  17. Description of internal flow problems by a boundary integral method with dipole panels

    International Nuclear Information System (INIS)

    Krieg, R.; Hailfinger, G.

    1979-01-01

    In reactor safety studies the failure of single components is postulated or sudden accident loadings are assumed and the consequences are investigated. Often as a first consequence highly transient three dimensional flow problems occur. In contrast to classical flow problems, in most of the above cases the fluid velocities are relatively small whereas the accelerations assume high values. As a consequence both, viscosity effects and dynamic pressures which are proportional to the square of the fluid velocities are usually negligible. For cases, where the excitation times are considerably longer than the times necessary for a wave to traverse characteristic regions of the fluid field, also the fluid compressibility is negligible. Under these conditions boundary integral methods are an appropriate tool to deal with the problem. Flow singularities are distributed over the fluid boundaries in such a way that pressure and velocity fields are obtained which satisfy the boundary conditions. In order to facilitate the numerical treatment the fluid boundaries are approximated by a finite number of panels with uniform singularity distributions on each of them. Consequently the pressure and velocity field of the given problem may be obtained by superposition of the corresponding fields due to these panels with their singularity intensities as unknown factors. Then satisfying the boundary conditions in so many boundary points as panels have been introduced, yields a system of linear equations which in general allows for a unique determination of the unknown intensities. (orig./RW)

  18. In situ stress measurement with the new LVDT - Cell - method description and verification

    International Nuclear Information System (INIS)

    Hakala, M.; Christiansson, R.; Martin, D.; Siren, T.; Kemppainen, K.

    2013-11-01

    Posiva Oy and SKB (Svensk Kaernbraenslehantering AB) tested the suitability a new LVDT-cell (Linear Variable Differential Transducer cell) to measure the induced stresses in the vicinity of an excavated surface and further to use these results to interpret the in situ state of stress. It utilises the overcoring methodology, measuring the radial convergence of four diameters using eight LVDTs, and is similar in concept to the USBM-gauge. A 127 mm diameter pilot-hole is required and the overcore diameter is 200 mm. The minimum overcoring length is 350 mm, and hence a compact drill can be utilised. Extensive testing of the LVDT-cell shows it to be robust and suitable for use in an underground environment. Sensitivity tests also show that the cell can withstand a range of operating conditions and still provide acceptable results. The in situ stress at the measurement location can be solved by numerical inversion using the results of at least three overcoring measurements around the three-dimensional tunnel section. The large dimensions of the measurement tool and the ability to utilise multiple measurements at various locations in a tunnel section, provides flexibility in selecting an appropriate rock mass volume. Because the inversion technique relies on knowing the exact location of the measurements and the geometry profile of the tunnel, modern survey techniques such as Lidar or photogrammetric technology should be used. Checks using traditional surveying techniques should also be used to ensure adequate survey resolution, specially in case of sidecoring measurements. To evaluate the suitability of the LVDT-cell to provide the in situ state of stress, tests were carried out in the drill-and-blast TASS tunnel and TBM tunnel at the Aespoe Hard Rock Laboratory in Sweden. The state of stress established using the LVDT-cell was in agreement with the state of stress established previously using traditional overcoring and hydraulic fracturing methods. In this study, the

  19. In situ stress measurement with the new LVDT - Cell - method description and verification

    Energy Technology Data Exchange (ETDEWEB)

    Hakala, M. [KMS Hakala Oy, Nokia (Finland); Christiansson, R. [Svensk Kaernbraenslehantering AB, Stockholm (Sweden); Martin, D. [Univ. of Alberta, Edmonton (Canada); Siren, T.; Kemppainen, K.

    2013-11-15

    Posiva Oy and SKB (Svensk Kaernbraenslehantering AB) tested the suitability a new LVDT-cell (Linear Variable Differential Transducer cell) to measure the induced stresses in the vicinity of an excavated surface and further to use these results to interpret the in situ state of stress. It utilises the overcoring methodology, measuring the radial convergence of four diameters using eight LVDTs, and is similar in concept to the USBM-gauge. A 127 mm diameter pilot-hole is required and the overcore diameter is 200 mm. The minimum overcoring length is 350 mm, and hence a compact drill can be utilised. Extensive testing of the LVDT-cell shows it to be robust and suitable for use in an underground environment. Sensitivity tests also show that the cell can withstand a range of operating conditions and still provide acceptable results. The in situ stress at the measurement location can be solved by numerical inversion using the results of at least three overcoring measurements around the three-dimensional tunnel section. The large dimensions of the measurement tool and the ability to utilise multiple measurements at various locations in a tunnel section, provides flexibility in selecting an appropriate rock mass volume. Because the inversion technique relies on knowing the exact location of the measurements and the geometry profile of the tunnel, modern survey techniques such as Lidar or photogrammetric technology should be used. Checks using traditional surveying techniques should also be used to ensure adequate survey resolution, specially in case of sidecoring measurements. To evaluate the suitability of the LVDT-cell to provide the in situ state of stress, tests were carried out in the drill-and-blast TASS tunnel and TBM tunnel at the Aespoe Hard Rock Laboratory in Sweden. The state of stress established using the LVDT-cell was in agreement with the state of stress established previously using traditional overcoring and hydraulic fracturing methods. In this study, the

  20. A search for susceptibility loci for anorexia nervosa: methods and sample description.

    Science.gov (United States)

    Kaye, W H; Lilenfeld, L R; Berrettini, W H; Strober, M; Devlin, B; Klump, K L; Goldman, D; Bulik, C M; Halmi, K A; Fichter, M M; Kaplan, A; Woodside, D B; Treasure, J; Plotnicov, K H; Pollice, C; Rao, R; McConaha, C W

    2000-05-01

    Eating disorders have not traditionally been viewed as heritable illnesses; however, recent family and twin studies lend credence to the potential role of genetic transmission. The Price Foundation funded an international, multisite study to identify genetic factors contributing to the pathogenesis of anorexia nervosa (AN) by recruiting affective relative pairs. This article is an overview of study methods and the clinical characteristics of the sample. All probands met modified DSM-IV criteria for AN; all affected first, second, and third degree relatives met DSM-IV criteria for AN, bulimia nervosa (BN), or eating disorder not otherwise specified (NOS). Probands and affected relatives were assessed diagnostically with the Structured Interview for Anorexia and Bulimia. DNA was collected from probands, affected relatives and a subset of their biological parents. Assessments were obtained from 196 probands and 237 affected relatives, over 98% of whom are of Caucasian ancestry. Overall, there were 229 relative pairs who were informative for linkage analysis. Of the proband-relative pairs, 63% were AN-AN, 20% were AN-BN, and 16% were AN-NOS. For family-based association analyses, DNA has been collected from both biological parents of 159 eating-disordered subjects. Few significant differences in demographic characteristics were found between proband and relative groups. The present study represents the first large-scale molecular genetic investigation of AN. Our successful recruitment of over 500 subjects, consisting of affected probands, affected relatives, and their biological parents, will provide the basis to investigate genetic transmission of eating disorders via a genome scan and assessment of candidate genes.

  1. The problem of the second wind turbine – a note on a common but flawed wind power estimation method

    Directory of Open Access Journals (Sweden)

    A. Kleidon

    2012-06-01

    Full Text Available Several recent wind power estimates suggest that this renewable energy resource can meet all of the current and future global energy demand with little impact on the atmosphere. These estimates are calculated using observed wind speeds in combination with specifications of wind turbine size and density to quantify the extractable wind power. However, this approach neglects the effects of momentum extraction by the turbines on the atmospheric flow that would have effects outside the turbine wake. Here we show with a simple momentum balance model of the atmospheric boundary layer that this common methodology to derive wind power potentials requires unrealistically high increases in the generation of kinetic energy by the atmosphere. This increase by an order of magnitude is needed to ensure momentum conservation in the atmospheric boundary layer. In the context of this simple model, we then compare the effect of three different assumptions regarding the boundary conditions at the top of the boundary layer, with prescribed hub height velocity, momentum transport, or kinetic energy transfer into the boundary layer. We then use simulations with an atmospheric general circulation model that explicitly simulate generation of kinetic energy with momentum conservation. These simulations show that the assumption of prescribed momentum import into the atmospheric boundary layer yields the most realistic behavior of the simple model, while the assumption of prescribed hub height velocity can clearly be disregarded. We also show that the assumptions yield similar estimates for extracted wind power when less than 10% of the kinetic energy flux in the boundary layer is extracted by the turbines. We conclude that the common method significantly overestimates wind power potentials by an order of magnitude in the limit of high wind power extraction. Ultimately, environmental constraints set the upper limit on wind power potential at larger scales rather than

  2. Relationships of Indoor, Outdoor, and Personal Air (RIOPA). Part I. Collection methods and descriptive analyses.

    Science.gov (United States)

    Weisel, Clifford P; Zhang, Junfeng; Turpin, Barbara J; Morandi, Maria T; Colome, Steven; Stock, Thomas H; Spektor, Dalia M; Korn, Leo; Winer, Arthur M; Kwon, Jaymin; Meng, Qing Yu; Zhang, Lin; Harrington, Robert; Liu, Weili; Reff, Adam; Lee, Jong Hoon; Alimokhtari, Shahnaz; Mohan, Kishan; Shendell, Derek; Jones, Jennifer; Farrar, L; Maberti, Slivia; Fan, Tina

    2005-11-01

    This study on the relationships of indoor, outdoor, and personal air (RIOPA) was undertaken to collect data for use in evaluating the contribution of outdoor sources of air toxics and particulate matter (PM) to personal exposure. The study was not designed to obtain a population-based sample, but rather to provide matched indoor, outdoor, and personal concentrations in homes that varied in their proximity to outdoor pollution sources and had a wide range of air exchange rates (AERs). This design allowed examination of relations among indoor, outdoor, and personal concentrations of air toxics and PM across a wide range of environmental conditions; the resulting data set obtained for a wide range of environmental pollutants and AERs can be used to evaluate exposure models. Approximately 100 households with residents who do not smoke participated in each of three cities in distinct locations expected to have different climates and housing characteristics: Elizabeth, New Jersey; Houston, Texas; and Los Angeles County, California. Questionnaires were administered to characterize homes, neighborhoods, and personal activities that might affect exposures. The concentrations of a suite of volatile organic compounds (VOCs) and carbonyl compounds, as well as the fraction of airborne particulate matter with a mass median aerodynamic diameter personal air samples were collected simultaneously. During the same 48-hour period, the AER (exchanges/hr; x hr(-1)) was determined in each home, and carbonyl compounds were measured inside vehicle cabins driven by a subset of the participants. In most of the homes, measurements were made twice, during two different seasons, to obtain a wide distribution of AERs. This report presents in detail the data collection methods, quality control measures, and initial analyses of data distributions and relations among indoor, outdoor, and personal concentrations. The results show that indoor sources dominated personal and indoor air concentrations

  3. Note-Making in Social Studies.

    Science.gov (United States)

    Fowler, Robert W.

    1985-01-01

    Note-making is one excellent method for helping students retain important points made by the teacher. Techniques that elementary and secondary social studies teacher can use to teach note-making skills are described. (RM)

  4. Exploration of consumer perception of Sauvignon Blanc wines with enhanced aroma properties using two different descriptive methods.

    Science.gov (United States)

    Lezaeta, Alvaro; Bordeu, Edmundo; Næs, Tormod; Varela, Paula

    2017-09-01

    The aim of this study was to evaluate consumers' perception of a complex set of stimuli as aromatically enriched wines. For that, two consumer based profiling methods were compared, concurrently run with overall liking measurements: projective mapping based on choice or preference (PM-C), a newly proposed method, and check-all-that-apply (CATA) questions with an ideal sample, a more established, consumer-based method for product optimization. Reserve bottling and regular bottling of Sauvignon Blanc wines from three wineries were aromatically enriched with natural aromas collected by condensation during wine fermentation. A total of 144 consumers were enrolled in the study. The results revealed that both consumer-based highlighted the positive effect of aromatic enrichment on consumer perception and acceptance. However, PM-C generated a very detailed description, in which consumers focused less on the sensory aspects and more on the usage, attitudes, and reasons behind their choices. Providing a deeper understanding of the drivers of liking/disliking of enriched Sauvignon Blanc wines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. A two-column formalism for time-dependent modelling of stellar convection. I. Description of the method

    Science.gov (United States)

    Stökl, A.

    2008-11-01

    Context: In spite of all the advances in multi-dimensional hydrodynamics, investigations of stellar evolution and stellar pulsations still depend on one-dimensional computations. This paper devises an alternative to the mixing-length theory or turbulence models usually adopted in modelling convective transport in such studies. Aims: The present work attempts to develop a time-dependent description of convection, which reflects the essential physics of convection and that is only moderately dependent on numerical parameters and far less time consuming than existing multi-dimensional hydrodynamics computations. Methods: Assuming that the most extensive convective patterns generate the majority of convective transport, the convective velocity field is described using two parallel, radial columns to represent up- and downstream flows. Horizontal exchange, in the form of fluid flow and radiation, over their connecting interface couples the two columns and allows a simple circulating motion. The main parameters of this convective description have straightforward geometrical meanings, namely the diameter of the columns (corresponding to the size of the convective cells) and the ratio of the cross-section between up- and downdrafts. For this geometrical setup, the time-dependent solution of the equations of radiation hydrodynamics is computed from an implicit scheme that has the advantage of being unaffected by the Courant-Friedrichs-Lewy time-step limit. This implementation is part of the TAPIR-Code (short for The adaptive, implicit RHD-Code). Results: To demonstrate the approach, results for convection zones in Cepheids are presented. The convective energy transport and convective velocities agree with expectations for Cepheids and the scheme reproduces both the kinetic energy flux and convective overshoot. A study of the parameter influence shows that the type of solution derived for these stars is in fact fairly robust with respect to the constitutive numerical

  6. Description of new species of Stenaelurillus Simon, 1886 from the Western Ghats of India with the redescription of Stenaelurillus lesserti Reimoser, 1934 and notes on mating plug in the genus (Arachnida, Araneae, Salticidae

    Directory of Open Access Journals (Sweden)

    Pothalil A. Sebastian

    2015-03-01

    Full Text Available A new species of the jumping spider genus Stenaelurillus Simon, 1886, S. albus sp. n., is described from the Western Ghats of India, one of the biodiversity hotspots of the world. Detailed morphological descriptions, diagnostic features and illustrations of copulatory organs of both sexes are given. Detailed redescription, diagnosis and illustration of S. lesserti Reimoser, 1934 are provided. The occurrence of a mating plug in the genus is reported.

  7. METHODS FOR DESCRIPTION OF EDUCATION AND SCIENTIFIC SERVICES IN INFORMATION AND EDUCATION ON THE BASIS OF INTEROPERABILITY STACK EIF

    Directory of Open Access Journals (Sweden)

    Ekaterina V. Pavlova

    2015-01-01

    Full Text Available The article deals with methodology for description of scientifi c and educational services in education and information on the basis of interoperability stack EIF (European Interoperability Framework. The passage describes operation factors to depict services on every level of the methodology, tools used to describe the services and the content. We also provide the link between methodology of description with the life span of the service. The article presents an example of service description according to the methodology considering the current education and professional standards, ITIL recommendations, ontology on the OWL basis and WSDL-description

  8. A simple method of measuring tibial tubercle to trochlear groove distance on MRI: description of a novel and reliable technique.

    Science.gov (United States)

    Camp, Christopher L; Heidenreich, Mark J; Dahm, Diane L; Bond, Jeffrey R; Collins, Mark S; Krych, Aaron J

    2016-03-01

    Tibial tubercle-trochlear groove (TT-TG) distance is a variable that helps guide surgical decision-making in patients with patellar instability. The purpose of this study was to compare the accuracy and reliability of an MRI TT-TG measuring technique using a simple external alignment method to a previously validated gold standard technique that requires advanced software read by radiologists. TT-TG was calculated by MRI on 59 knees with a clinical diagnosis of patellar instability in a blinded and randomized fashion by two musculoskeletal radiologists using advanced software and by two orthopaedists using the study technique which utilizes measurements taken on a simple electronic imaging platform. Interrater reliability between the two radiologists and the two orthopaedists and intermethods reliability between the two techniques were calculated using interclass correlation coefficients (ICC) and concordance correlation coefficients (CCC). ICC and CCC values greater than 0.75 were considered to represent excellent agreement. The mean TT-TG distance was 14.7 mm (Standard Deviation (SD) 4.87 mm) and 15.4 mm (SD 5.41) as measured by the radiologists and orthopaedists, respectively. Excellent interobserver agreement was noted between the radiologists (ICC 0.941; CCC 0.941), the orthopaedists (ICC 0.978; CCC 0.976), and the two techniques (ICC 0.941; CCC 0.933). The simple TT-TG distance measurement technique analysed in this study resulted in excellent agreement and reliability as compared to the gold standard technique. This method can predictably be performed by orthopaedic surgeons without advanced radiologic software. II.

  9. Notes on Laser Acceleration

    International Nuclear Information System (INIS)

    Tajima, T.

    2008-01-01

    This note intends to motivate our effort toward the advent of new methods of particle acceleration, utilizing the fast rising laser technology. By illustrating the underlying principles in an intuitive manner and thus less jargon-clad fashion, we seek a direction in which we shall be able to properly control and harness the promise of laser acceleration. First we review the idea behind the laser wakefield. We then go on to examine ion acceleration by laser. We examine the sheath acceleration in particular and look for the future direction that allows orderly acceleration of ions in high energies

  10. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1999-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  11. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1998-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  12. Sexual and Reproductive Health Needs of HIV-Positive People in Tehran, Iran: A Mixed-Method Descriptive Study

    Directory of Open Access Journals (Sweden)

    Saharnaz Nedjat

    2015-09-01

    Full Text Available Background People Living with HIV (PLHIV are highly stigmatized and consequently hard-to-access by researchers and importantly, public health outreach in Iran, possibly due to the existing socio-cultural situation in this country. The present study aimed to evaluate the sexual and reproductive health needs of PLHIV in Tehran, the capital of Iran. Methods As a mixed-method descriptive study, this project was conducted in 2012 in Tehran, Iran. In this study, we evaluated and discussed socio-demographic characteristics, family and social support, sexual behaviors, fertility desires and needs, PMTCT services, contraceptive methods, unintended pregnancy and safe abortion, and Pap smear tests among 400 participants referring to the behavioral disorders consulting centers. Results Of the sample 240 (60% were male and 160 (40% were female. About 50% of women and 40% of men were 25-34 years old. More than 60% of men and 96% of women were married, while more than 50% of the participants had HIV-positive spouses at the time of study. According to the results, fertility desire was observed among more than 30% of female and 40% of male participants. Results of the in-depth interviews indicate that the participants are not satisfied with most of the existing services offered to address their sexual and reproductive health needs. Conclusion Despite the availability of services, most of sexual and reproductive health needs of the PLHIV are overlooked by the health system in Iran. Paying attention to sexual and reproductive health needs of PLHIV in Iran not only protects their right to live long and healthy lives, but also may prevent the transmission of HIV from the patients to others within the community.

  13. Tight Binding methods in quantum transport through molecules and small devices: from the coherent to the incoherent description

    Energy Technology Data Exchange (ETDEWEB)

    Pastawaski, Horacio M. [Universidad Nacional de Cordoba, Cordoba (Argentina); Medina, Ernesto [Instituto Venezolano de Investigaciones Cientificas, Caracas (Venezuela)

    2001-03-01

    We discuss the steady-state electronic transport in solid-state and molecular devices in the quantum regime. The decimation technique allows a comprehensive description of the electronic structure. Such a method is used, in conjunction with the generalizations of Landauer's tunneling formalism, to describe a wide range of transport regimes. We analyze mesoscopic and semiclassical metallic transport, the metal-insulator transition, and the resonant tunneling regime. The effects of decoherence on transport is discussed in terms of the D' Amato-Pastawski model. A brief presentation of the time dependent phenomena is also included. [Spanish] Se discuten el transporte, en el estado estacionario, en dispositivos moleculares y de estado solido en el regimen cuantico. La tecnica de decimacion permite una descripcion completa de la estructura electronica. Tal metodo, en conjunto con la generalizacion del formalismo de Landauer, puede ser usado para describir un rango amplio de regimenes de transporte. Se analizan el transporte mesoscopico y semiclasico en el regimen metalico, la transicion metal-aislante, y el regimen de tunel resonante. Los efectos de decoherencia en el transporte son tratados en terminos de modelos de D'amato-Pastawski. Finalmente se incluye una breve presentacion de fenomenos dependientes del tiempo.

  14. Inventory of greenhouse gases at the municipality level. Description of calculation methods; Denmark; Drivhusgasopgoerelse paa kommuneniveau. Beskrivelse af beregningsmetoder

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Ole-Kenneth; Winther, M.; Gyldenkaerne, S.; Lyck, E.; Thomsen, Marianne; Hoffmann, L.; Fauser, P.

    2009-02-15

    This report includes a description of methodologies, data and algorithms behind the inventories of greenhouse gases at the municipality level divided into sectors. The starting point for the sectors in this report is the sectors used for the official Danish emission inventories. A simplified generalization of the equations used in emission calculations is based on the assumption that emissions of a given activity is estimated using data descriptive for the size of the activity multiplied by an emission factor pr unit of activity. Emissions of CH{sub 4} and N{sub 2}O are converted to CO{sub 2} equivalents. In this project this generalization and these conversions are also the basis for all methodologies. The sectors included in this report are: the collective power and heating, individual heating, mobile sources, transportation and machinery, industrial processes, solvents, agriculture, land use and waste depositing and wastewater. The methods include calculations of the greenhouse gases that are most important for the sectors. The importance is estimated from the national emission inventory. This report covers methodologies for the greenhouse gases CO{sub 2}, CH{sub 4} and N{sub 2}O. Due to the mentioned importance criteria for some sectors not all greenhouse gases are included. As for the national inventories the calculation is built into several levels (Tiers) with increased requirements for municipalities regarding data. Tier 1 is mainly based on the Danish national greenhouse gas inventory data using appropriate distribution keys for a given activity into municipality level. Tier 2 is more detailed and includes emission factors used in the Danish national greenhouse gas inventories, for some sectors the emission factors are aggregated, while municipalities can enter their own activity data. At Tier 3, which is the most detailed level, there is - for some sectors - the opportunity to enter municipality specific emission factors and activity data. For other

  15. Note Taking and Recall

    Science.gov (United States)

    Fisher, Judith L.; Harris, Mary B.

    1974-01-01

    To study the effect of note taking and opportunity for review on subsequent recall, 88 college students were randomly assigned to five treatment groups utilizing different note taking and review combinations. No treatment effects were found, although quality of notes was positively correlated with free recall an multiple-choice measures.…

  16. Pain control methods in use and perceived effectiveness by patients with Ehlers-Danlos syndrome: a descriptive study.

    Science.gov (United States)

    Arthur, Karen; Caldwell, Karen; Forehand, Samantha; Davis, Keith

    2016-01-01

    The purpose of this study was to assess the pain control methods in use by patients who have Ehlers-Danlos Syndrome (EDS), a group of connective tissue disorders, and their perceived effectiveness. This descriptive study involved 1179 adults diagnosed with EDS who completed an anonymous on-line survey. The survey consisted of demographics information, the Patient Reported Outcomes Measurement Information System (PROMIS) Pain-Behavior, PROMIS Pain-Interference, and Neuro QOL Satisfaction with Social Roles and Activities scales, as well as a modified version of the Pain Management Strategies Survey. Respondents reported having to seek out confirmation of their EDS diagnosis with multiple healthcare providers, which implies the difficulty many people with EDS face when trying to gain access to appropriate treatment. Patients with EDS experience higher levels of pain interference and lower satisfaction with social roles and activities compared to national norms. Among the treatment modalities in this study, those perceived as most helpful for acute pain control were opioids, surgical interventions, splints and braces, avoidance of potentially dangerous activities and heat therapy. Chronic pain treatments rated as most helpful were opioids, splints or braces and surgical interventions. For methods used for both acute and chronic pain, those perceived as most helpful were opioids, massage therapies, splints or braces, heat therapy and avoiding potentially dangerous activities. EDS is a complex, multi-systemic condition that can be difficult to diagnose and poses challenges for healthcare practitioners who engage with EDS patients in holistic care. Improved healthcare provider knowledge of EDS is needed, and additional research on the co-occurring diagnoses with EDS may assist in comprehensive pain management for EDS patients. Ehlers-Danlos Syndrome (EDS) is a group of connective tissue disorders associated with defective production of collagen, which can dramatically

  17. Quality of outpatient clinical notes: a stakeholder definition derived through qualitative research

    Directory of Open Access Journals (Sweden)

    Hanson Janice L

    2012-11-01

    Full Text Available Abstract Background There are no empirically-grounded criteria or tools to define or benchmark the quality of outpatient clinical documentation. Outpatient clinical notes document care, communicate treatment plans and support patient safety, medical education, medico-legal investigations and reimbursement. Accurately describing and assessing quality of clinical documentation is a necessary improvement in an increasingly team-based healthcare delivery system. In this paper we describe the quality of outpatient clinical notes from the perspective of multiple stakeholders. Methods Using purposeful sampling for maximum diversity, we conducted focus groups and individual interviews with clinicians, nursing and ancillary staff, patients, and healthcare administrators at six federal health care facilities between 2009 and 2011. All sessions were audio-recorded, transcribed and qualitatively analyzed using open, axial and selective coding. Results The 163 participants included 61 clinicians, 52 nurse/ancillary staff, 31 patients and 19 administrative staff. Three organizing themes emerged: 1 characteristics of quality in clinical notes, 2 desired elements within the clinical notes and 3 system supports to improve the quality of clinical notes. We identified 11 codes to describe characteristics of clinical notes, 20 codes to describe desired elements in quality clinical notes and 11 codes to describe clinical system elements that support quality when writing clinical notes. While there was substantial overlap between the aspects of quality described by the four stakeholder groups, only clinicians and administrators identified ease of translation into billing codes as an important characteristic of a quality note. Only patients rated prioritization of their medical problems as an aspect of quality. Nurses included care and education delivered to the patient, information added by the patient, interdisciplinary information, and infection alerts as important

  18. Technical Note: FreeCT_ICD: An Open Source Implementation of a Model-Based Iterative Reconstruction Method using Coordinate Descent Optimization for CT Imaging Investigations.

    Science.gov (United States)

    Hoffman, John M; Noo, Frédéric; Young, Stefano; Hsieh, Scott S; McNitt-Gray, Michael

    2018-06-01

    To facilitate investigations into the impacts of acquisition and reconstruction parameters on quantitative imaging, radiomics and CAD using CT imaging, we previously released an open source implementation of a conventional weighted filtered backprojection reconstruction called FreeCT_wFBP. Our purpose was to extend that work by providing an open-source implementation of a model-based iterative reconstruction method using coordinate descent optimization, called FreeCT_ICD. Model-based iterative reconstruction offers the potential for substantial radiation dose reduction, but can impose substantial computational processing and storage requirements. FreeCT_ICD is an open source implementation of a model-based iterative reconstruction method that provides a reasonable tradeoff between these requirements. This was accomplished by adapting a previously proposed method that allows the system matrix to be stored with a reasonable memory requirement. The method amounts to describing the attenuation coefficient using rotating slices that follow the helical geometry. In the initially-proposed version, the rotating slices are themselves described using blobs. We have replaced this description by a unique model that relies on tri-linear interpolation together with the principles of Joseph's method. This model offers an improvement in memory requirement while still allowing highly accurate reconstruction for conventional CT geometries. The system matrix is stored column-wise and combined with an iterative coordinate descent (ICD) optimization. The result is FreeCT_ICD, which is a reconstruction program developed on the Linux platform using C++ libraries and the open source GNU GPL v2.0 license. The software is capable of reconstructing raw projection data of helical CT scans. In this work, the software has been described and evaluated by reconstructing datasets exported from a clinical scanner which consisted of an ACR accreditation phantom dataset and a clinical pediatric

  19. Note e Recensioni

    Directory of Open Access Journals (Sweden)

    a cura di Mariagrazia Portera

    2013-12-01

    Full Text Available Volumi Winfried Menninghaus, La promessa della bellezza, [Fabrizio Desideri, p. 272] • David Rothenberg, Survival of the Beautiful. Art, Science and Evolution [Danae Crocchiola, p. 274] • Lev Manovich, Software Takes Command [Angela Maiello, p. 277]. Note Method in Aesthetics: Philosophy, Evolution and the Cognitive Sciences [Aaron Meskin, Matthew Kieran, Gregory Currie, p. 280] • L’Abitare possibile. Estetica, Architettura e New Media, Ravello, Auditorium Oscar Niemeyer, 28-30 maggio 2013 [Sara Matetich, p. 282] • Copenhagen Summer School in Phenomenology and Philosophy of Mind, University of Copenhagen, 12-16 Agosto 2013 [Raoul Frauenfelder, p. 289] • Ciò che è vivo e ciò che è morto nell’estetica di Archibald Ali- son. Nota a margine del convegno: Neoestetica ed emozione. Archibald Alison e l’estetica con- temporanea, Palermo, 4-5 ottobre 2013 [Giuseppe Pucci, p. 294

  20. Description of a new species of skate of the genus Malacoraja Stehmann, 1970: the first species from the southwestern Atlantic Ocean, with notes on generic monophyly and composition (Chondrichthyes: Rajidae

    Directory of Open Access Journals (Sweden)

    Marcelo R. de Carvalho

    Full Text Available The first report of a western South Atlantic soft skate, genus Malacoraja Stehmann, 1970, is described as Malacoraja obscura, new species, from the southeastern Brazilian continental slope off the states of Espírito Santo and Rio de Janeiro, in depths ranging from 808-1105 m. The new species is known from five specimens and is distinguished from congeners by its unique dorsal coloration with small, faded white spots on disc and pelvic fins, by retaining in larger specimens an irregular row of thorns along dorsal midline of tail (extending from tail base to two-thirds of tail length in 680 mm total length female, and by presenting a ventral tail midline devoid of small denticles only at base (naked region not extending posterior to pelvic fin rear margin. Further diagnostic characters in combination include the lack of scapular thorns in larger specimens, elevated number of tooth rows (64/62 tooth rows in subadult male of 505 mm TL, and 76/74 in large female of 680 mm TL and vertebrae (27-28 Vtr, 68-75 Vprd, ventral disc and tail with a uniform dark brown coloration, paired postventral fenestrae on scapulocoracoid, enlarged posterior postventral fenestra, circular foramen magnum and paired internal carotid foramina on braincase floor. Adult males were unavailable for study, but an anatomical description of M. obscura, n. sp., is provided. Comparisons are made with all known material of M. kreffti, literature accounts of M. senta, and with abundant material of South African M. spinacidermis; M. obscura, n. sp., most closely resembles M. spinacidermis from the eastern South Atlantic in squamation, coloration and size. Malacoraja is monophyletic due to its unique squamation and rostral appendices, and apparently comprises two species-groups, one for M. obscura and M. spinacidermis, and the other for M. kreffti and M. senta, but clarification of species-level relationships must await more anatomical information, particularly of the latter two

  1. Description of the immature stages of Sigara (Tropocorixa jensenhaarupi (Hemiptera: Heteroptera: Corixidae: Corixini, with ecological notes Descripción de los estadios larvales de Sigara (Tropocorixa jensenhaarupi (Heteroptera: Corixidae, con notas acerca de su ecología

    Directory of Open Access Journals (Sweden)

    María Cecilia Melo

    2011-03-01

    Full Text Available Sigara (Tropocorixa jensenhaarupi Jaczewski is the smallest species of the subgenus ranging from 4.2-4.7 mm, and it is characterized by the absence of a strigil, the small and narrow genital capsule with a short hypandrium in males, and the shape of the abdominal tergite VII in females. This species is endemic to the Patagonian subregion (Andean region in Argentina. A monthly sampling study was performed during a year in northern Mendoza, and additional material was collected in southern Mendoza, more precisely from Bañado Carilauquen in the Llancanelo Lake Reserve (Malargüe Department. Since little is known about the ecological requirements of S. (T. jensenhaarupi, herein we describe its habitat, the environmental conditions and its association with other macroinvertebrates. Also, we provide a morphological description of larval stages, and provide new records of this species.Sigara (Tropocorixa jensenhaarupi Jaczewski es la especie más pequeña del subgénero (4.2-4.7 mm, y se caracteriza por la ausencia de estrigilo, la cápsula genital masculina pequeña y angosta con el hipandro corto, y la forma característica del tergito abdominal VII en las hembras. Esta especie es endémica de la subregión Patagónica (región Andina en Argentina. Se realizaron muestreos mensuales durante un año en el norte de la provincia de Mendoza, material adicional fue recolectado en el sur de la provincia, más precisamente en el Bañado Carilauquen en la Reserva Laguna Llancanelo (Departamento de Malargüe. Poco se conoce acerca de los requerimientos ecológicos de S. (T. jensenhaarupi, por lo que en este trabajo describimos su hábitat, las condiciones ambientales y su asociación con otros macroinvertebrados. Además, describimos los estadios larvales y damos nuevos registros de esta especie.

  2. Description of a satellite experiment for isotopic-composition measurement of cosmic nuclei by the slowing-down method

    International Nuclear Information System (INIS)

    Bouffard, M.; Engelmann, J.

    1975-01-01

    Two possible versions of an experiment for launch aboard an ESRO free-flyer spacecraft in the 1980's are described. All the data quoted are, of course, preliminary. They may be used only as a basis for discussion although they are derived from well-known balloon hardware. The telescope arrangement, the description of counter, drift chamber and electronics are given [fr

  3. 1. On note taking.

    Science.gov (United States)

    Plaut, Alfred B J

    2005-02-01

    In this paper the author explores the theoretical and technical issues relating to taking notes of analytic sessions, using an introspective approach. The paper discusses the lack of a consistent approach to note taking amongst analysts and sets out to demonstrate that systematic note taking can be helpful to the analyst. The author describes his discovery that an initial phase where as much data was recorded as possible did not prove to be reliably helpful in clinical work and initially actively interfered with recall in subsequent sessions. The impact of the nature of the analytic session itself and the focus of the analyst's interest on recall is discussed. The author then describes how he modified his note taking technique to classify information from sessions into four categories which enabled the analyst to select which information to record in notes. The characteristics of memory and its constructive nature are discussed in relation to the problems that arise in making accurate notes of analytic sessions.

  4. Descriptive Qualitative Method of Evaluation from the Viewpoint of Math Teachers and Its Comparison with the Quantitative Evaluation (Giving scores) Method (A Case Study on the Primary Schools for Girls in Zone 1 of Tehran City)

    OpenAIRE

    Farnaz Ostad-Ali; Mohammad Hasan Behzadi; Ahmad Shahvarani

    2015-01-01

    In recent years, one of the most important developments which have been taking place in the primary school education system is the development of the qualitative-descriptive method of evaluating the students' achievements. The main goals of the qualitative-descriptive evaluation are improving the quality of learning and promoting the level of mental health in teaching-learning environments. Therefore, based on the the raised hypothesis, the purpose of this study is to investigate the teachers...

  5. A Revision of Lasionycta Aurivillius (Lepidoptera: Noctuidae) for North America and notes on Eurasian species, with descriptions of 17 new species, 6 new subspecies, a new genus, and two new species of Tricholita Grote

    OpenAIRE

    Crabo,Lars; Lafontaine,Donald

    2009-01-01

    The North American species of Lasionycta Aurivillius are revised to include 43 species and 13 subspecies using traditional methods and mitochondrial cytochrome oxidase subunit 1 (CO1) DNA sequence (barcode) analysis. Seven species-groups are recognized, and one group is further divided into seven sub-groups. Seventeen species and six subspecies of Lasionycta are described: L. anthracina Crabo & Lafontaine, L. benjamini medaminosa Crabo & Lafontaine, L. brunnea Crabo & Lafontaine, ...

  6. Some notes about the nuclear data libraries

    International Nuclear Information System (INIS)

    Panini, G.C.

    1984-01-01

    The paper gives a short description of the main nuclear data collections. The features which are particular of each source are enhanced and compared. Notes about the Nuclear Data Processing are also outlined. The paper is intended as a preliminary approach for people interested in the Nuclear Data management

  7. A note on notes: note taking and containment.

    Science.gov (United States)

    Levine, Howard B

    2007-07-01

    In extreme situations of massive projective identification, both the analyst and the patient may come to share a fantasy or belief that his or her own psychic reality will be annihilated if the psychic reality of the other is accepted or adopted (Britton 1998). In the example of' Dr. M and his patient, the paradoxical dilemma around note taking had highly specific transference meanings; it was not simply an instance of the generalized human response of distracted attention that Freud (1912) had spoken of, nor was it the destabilization of analytic functioning that I tried to describe in my work with Mr. L. Whether such meanings will always exist in these situations remains a matter to be determined by further clinical experience. In reopening a dialogue about note taking during sessions, I have attempted to move the discussion away from categorical injunctions about what analysis should or should not do, and instead to foster a more nuanced, dynamic, and pair-specific consideration of the analyst's functioning in the immediate context of the analytic relationship. There is, of course, a wide variety of listening styles among analysts, and each analyst's mental functioning may be affected differently by each patient whom the analyst sees. I have raised many questions in the hopes of stimulating an expanded discussion that will allow us to share our experiences and perhaps reach additional conclusions. Further consideration may lead us to decide whether note taking may have very different meanings for other analysts and analyst-patient pairs, and whether it may serve useful functions in addition to the one that I have described.

  8. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflageration

    International Nuclear Information System (INIS)

    Crowe, R.D. Westinghouse Hanford

    1996-01-01

    The purpose of this calculation note is to provide the basis for In-Tank Fuel fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided

  9. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflagration

    Energy Technology Data Exchange (ETDEWEB)

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for In-Tank Fuel Fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  10. Technical note on drainage systems

    DEFF Research Database (Denmark)

    Bentzen, Thomas Ruby

    This technical note will present simple but widely used methods for the design of drainage systems. The note will primarily deal with surface water (rainwater) which on a satisfactorily way should be transport into the drainage system. Traditional two types of sewer systems exist: A combined system......, where rainwater and sewage is transported in the same pipe, and a separate system where the two types of water are transported in individual pipe. This note will only focus on the separate rain/stormwater system, however, if domestic sewage should be included in the dimensioning procedure, it......’s not major different than described below - just remember to include this contribution for combined systems where the surface water (rain) and sewage are carried in the same pipes in the system and change some of the parameters for failure allowance (this will be elaborated further later on). The technical...

  11. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  12. On that Note...

    Science.gov (United States)

    Stein, Harry

    1988-01-01

    Provides suggestions for note-taking from books, lectures, visual presentations, and laboratory experiments to enhance student knowledge, memory, and length of attention span during instruction. Describes topical and structural outlines, visual mapping, charting, three-column note-taking, and concept mapping. Benefits and application of…

  13. Making Notes, Making Meaning.

    Science.gov (United States)

    Burke, Jim

    2002-01-01

    Introduces notetaking tools used successfully with English-as-a-second-language students and low-achieving high school freshmen. Provides an overview of each tool and explains how students use them to take notes when reading textbooks and articles. Notes these tools and academic habits have helped students succeed in their mainstream academic…

  14. A note on Fukui’s note

    Directory of Open Access Journals (Sweden)

    Tsai Cheng-Yu Edwin

    2015-12-01

    Full Text Available This commentary relates Fukui’s (2015 note on weak vs. strong generation to two aspects of quantification in Chinese: quantifier scope and the syntactic licensing conditions of noninterrogative wh-expressions. It is shown that the phenomena under discussion echo Fukui’s (2015 view that only strong generation allows for a deeper understanding of natural language and that dependencies are to be distinguished structurally.

  15. A study of actions in operative notes.

    Science.gov (United States)

    Wang, Yan; Pakhomov, Serguei; Burkart, Nora E; Ryan, James O; Melton, Genevieve B

    2012-01-01

    Operative notes contain rich information about techniques, instruments, and materials used in procedures. To assist development of effective information extraction (IE) techniques for operative notes, we investigated the sublanguage used to describe actions within the operative report 'procedure description' section. Deep parsing results of 362,310 operative notes with an expanded Stanford parser using the SPECIALIST Lexicon resulted in 200 verbs (92% coverage) including 147 action verbs. Nominal action predicates for each action verb were gathered from WordNet, SPECIALIST Lexicon, New Oxford American Dictionary and Stedman's Medical Dictionary. Coverage gaps were seen in existing lexical, domain, and semantic resources (Unified Medical Language System (UMLS) Metathesaurus, SPECIALIST Lexicon, WordNet and FrameNet). Our findings demonstrate the need to construct surgical domain-specific semantic resources for IE from operative notes.

  16. The use of qualitative methods in developing the descriptive systems of preference-based measures of health-related quality of life for use in economic evaluation.

    Science.gov (United States)

    Stevens, Katherine; Palfreyman, Simon

    2012-12-01

    To describe how qualitative methods can be used in the development of descriptive systems of preference-based measures (PBMs) of health-related quality of life. The requirements of the National Institute for Health and Clinical Excellence and other agencies together with the increasing use of patient-reported outcome measures has led to an increase in the demand for PBMs. Recently, interest has grown in developing new PBMs and while previous research on PBMs has mainly focused on the methods of valuation, research into the methods of developing descriptive systems is an emerging field. Traditionally, descriptive systems of PBMs were developed by using top-down methods, where content was derived from existing measures, the literature, or health surveys. A contrasting approach is a bottom-up methodology, which takes the views of patients or laypeople on how their life is affected by their health. This approach generally requires the use of qualitative methods. Qualitative methods lend themselves well to the development of PBMs. They also ensure that the measure has appropriate language, content validity, and responsiveness to change. While the use of qualitative methods in the development of non-PBMs is fairly standard, their use in developing PBMs was until recently nonexistent. In this article, we illustrate the use of qualitative methods by presenting two case studies of recently developed PBMs, one generic and one condition specific. We outline the stages involved, discuss the strengths and weaknesses of the approach, and compare with the top-down approach used in the majority of PBMs to date. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  17. [Methodology of the description of atmospheric air pollution by nitrogen dioxide by land use regression method in Ekaterinburg].

    Science.gov (United States)

    Antropov, K M; Varaksin, A N

    2013-01-01

    This paper provides the description of Land Use Regression (LUR) modeling and the result of its application in the study of nitrogen dioxide air pollution in Ekaterinburg. The paper describes the difficulties of the modeling for air pollution caused by motor vehicles exhaust, and the ways to address these challenges. To create LUR model of the NO2 air pollution in Ekaterinburg, concentrations of NO2 were measured, data on factors affecting air pollution were collected, a statistical analysis of the data were held. A statistical model of NO2 air pollution (coefficient of determination R2 = 0.70) and a map of pollution were created.

  18. A Revision of Lasionycta Aurivillius (Lepidoptera: Noctuidae for North America and notes on Eurasian species, with descriptions of 17 new species, 6 new subspecies, a new genus, and two new species of Tricholita Grote

    Directory of Open Access Journals (Sweden)

    Lars Crabo

    2009-12-01

    Full Text Available The North American species of Lasionycta Aurivillius are revised to include 43 species and 13 subspecies using traditional methods and mitochondrial cytochrome oxidase subunit 1 (CO1 DNA sequence (barcode analysis. Seven species-groups are recognized, and one group is further divided into seven sub-groups. Seventeen species and six subspecies of Lasionycta are described: L. anthracina Crabo & Lafontaine, L. benjamini medaminosa Crabo & Lafontaine, L. brunnea Crabo & Lafontaine, L. caesia Crabo & Lafontaine, L. carolynae Crabo, L. coracina Crabo & Lafontaine, L. fergusoni Crabo & Lafontaine, L. frigida Crabo & Lafontaine, L. gelida Crabo & Lafontaine, L. haida Crabo & Lafontaine, L. illima Crabo & Lafontaine, L. mono Crabo & Lafontaine, L. uniformis fusca Crabo & Lafontaine, L. uniformis handfieldi Crabo & Lafontaine, L. uniformis multicolor Crabo & Lafontaine, L. uniformis shasta Crabo & Lafontaine, L. perplexella Crabo & Lafontaine, L. pulverea Crabo & Lafontaine, L. sasquatch Crabo & Lafontaine, L. sierra Crabo & Lafontaine, L. silacea Crabo & Lafontaine, L. subalpina Crabo & Lafontaine, and L. subfuscula livida Crabo & Lafontaine. Lasionycta coloradensis (Richards, L. dolosaL. flanda (Barnes & Benjamin, (Smith, L. poca (Barnes & Benjamin, and L. subfumosa (Gibson are elevated to species. The following new synonyms are recognized: Scotogramma albinuda Smith (= Lasiestra phoca Möschler, Lasiestra klotsi Richards (= Scotogramma discolor Smith, Scotogramma infuscata Smith (= Mamestra promulsa Morrison, Lasionycta alberta Barnes & Benjamin and Anytus marloffi Smith (= Scotogramma perplexa Smith, Scotogramma sedilis Smith (= Scotogramma subfuscula Grote, Mamestra rainieri Smith (= Mamestra mutilata Smith, Anarta zemblica Hampson (= Anarta staudingeri Aurivillius, and Anarta etacta Smith (= Mamestra arietis Grote. The Eurasian species are reviewed resulting in the following changes: Lasionhada proxima (Hübner, comb. rev., Eriopygodes imbecilla

  19. Mysore study: A study of suicide notes.

    Science.gov (United States)

    Namratha, P; Kishor, M; Sathyanarayana Rao, T S; Raman, Rajesh

    2015-01-01

    Suicide is one of the leading causes of preventable deaths. Recent data suggest South India as one of the regions with highest suicide rates in the world. In 2013, 134,799 people committed suicide in India according to the statistics released by the National Crime Records Bureau. Suicide note is one of the most important sources to understand suicide, which may be beneficial in suicide prevention. Studies on suicidal notes from this part of the world are sparse. The aim was to study the themes in suicide notes that might be useful in prevention strategies. A descriptive study of all suicide notes of those individuals who committed suicide between 2010 and 2013 available with Police Department, Mysore district was obtained and analyzed. A total of 22 suicide note were available. A majority of suicide note was in age group of 16-40 years (86%) and most were men (59%). All suicide notes were handwritten, the majority (70%) in regional language Kannada. Length of notes varied from just few words to few pages. Contents of suicide notes included apology/shame/guilt (80%), love for those left behind (55%) and instruction regarding practical affairs (23%). Most have blamed none for the act (50%). 23% mentioned that they are committing suicide to prove their innocence. 32% mentioned a last wish. The majority of suicidal note contained "guilt" which is a strong indicator of possible depression in deceased. Creating awareness about suicide among public and ensuring access to professionals trained in suicide prevention is need of the hour in this part of the world.

  20. Using Guided Notes to Enhance Instruction for All Students

    Science.gov (United States)

    Konrad, Moira; Joseph, Laurice M.; Itoi, Madoka

    2011-01-01

    Taking notes from lectures or reading material can be challenging, especially for those who have learning disabilities. An alternative to traditional note-taking is a method called "guided notes," which has been found to improve the accuracy of students' notes, increase the frequency of student responses, and improve students' quiz and test…

  1. MixedNotes

    DEFF Research Database (Denmark)

    Jokela, Tero; Lucero, Andrés

    2014-01-01

    Affinity Diagramming is a technique to organize and make sense of qualitative data. It is commonly used in Contextual Design and HCI research. However, preparing notes for and building an Affinity Diagram remains a laborious process, with a wide variety of different approaches and practices....... In this paper, we present MixedNotes, a novel technique to prepare physical paper notes for Affinity Diagramming, and a software tool to support this technique. The technique has been tested with large real-life Affinity Diagrams with overall positive results....

  2. Profiling Chilean Suicide Note-Writers through Content Analysis

    Directory of Open Access Journals (Sweden)

    Francisco Ceballos-Espinoza

    2016-09-01

    Full Text Available Suicides account for 2000 deaths in Chile each year. With a suicide rate of 11.3, it is classified as a country with high suicide risk. Aims: to identify personality and cognitive characteristics of the group of Chilean suicides that left suicide notes, through a content analysis. Methods: descriptive field study with an ex post facto design. All suicides registered between 2010 and 2012 by the Investigations Police of Chile were analyzed, obtaining 203 suicide notes from 96 cases. The Darbonne categories for content analysis were used with the inter-judge method. Results: The mean age of the suicides was 44.2 (SD = 18.53. Most of the notes were addressed to family members (51.7%. The most expressed reasons were marital- or interpersonal-related (24.6%; another 23.6% expressed a lack of purpose or hopelessness (including depression, wish to die, low self-esteem. The most frequent content expressed were instructions (about money, children, and funeral. All of the notes showed logical thinking and were written with coherence and clarity. Notably 42% of the notes were marked by affections of fondness, love or dependence of others. Regarding attitudes, the most common were of escape or farewell (42.4%, followed by fatalism, hopelessness, frustration or tiredness (40%. 24 statistically significant differences were found throughout the categories of analysis, according to cohorts of age, marital status and sex. Conclusions: the findings contribute to the profiling of Chilean suicides and to the implementation of suicide prevention programs

  3. Implications of observing and writing field notes through different lenses

    Directory of Open Access Journals (Sweden)

    Hellesø R

    2015-04-01

    Full Text Available Ragnhild Hellesø,1 Line Melby,1 Solveig Hauge21Department of Nursing Science, Institute of Health and Society, Faculty of Medicine, University of Oslo, Oslo, Norway; 2Faculty of Health and Social Studies, Telemark University College, Porsgrunn, NorwayBackground: From a philosophy of science perspective, the literature has posited that different research approaches influence field studies. Studies addressing interdisciplinary research have focused on the challenges of organizing and running interdisciplinary teams, cultural differences between and within disciplines, and constraints in conducting interdisciplinary research. Studies exploring and discussing the process and outcome of transferring observations to notes from an interdisciplinary point of view are not identified. The aim of this paper is to explore the characteristics of field notes created by researchers representing different disciplines and experiences.Methods: A case study using a modified dynamic observation method was employed. The analyses were initiated by a researcher who had not been involved in the data collection. The field notes were analyzed using three main steps.Results: The structures of both researchers' field notes were characterized by similarities in their descriptions, but the notes' foci and analytical levels differed.Conclusion: The findings contribute new insights concerning the execution of interdisciplinary observational studies. Our findings demonstrate that entering the field with different lenses produced richer and more varied data, providing a broader platform from which to discuss and interpret a study's findings. From a theoretical point of view, the findings enable a more nuanced discussion and a conceptual elaboration regarding how observational approaches should be pursued in future studies. On a practical level, the findings show that even if the researchers agree on what the overall focus in the observations should be, differences can occur in

  4. Lagos Notes and Records

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH ... Lagos Notes and Records is an annual, interdisciplinary journal of the humanities. ... Insuring the Nation: Europeans and the Emergence of Modern Insurance Business in Colonial Nigeria ...

  5. Notes on Contributors

    African Journals Online (AJOL)

    NOTES ON CONTRIBUTORS. Samuel AMOAKO, Associate Researcher, South African Research Unit in Social Change. Contact Details: C/o Lucinda Bercony, Humanities Research Village (House No. 3). University of Johannesburg, P. O. Box 524. Bunting Road Campus, Auckland Park, 2006.

  6. NCEP Internal Office Notes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Centers for Environmental Prediction (NCEP) and its predecessors have produced internal publications, known as Office Notes, since the mid-1950's. In...

  7. Writing a Condolence Note

    Science.gov (United States)

    ... through the eyes of others. For example, a mother whose son had died found out that her ... few suggestions on ending your condolence note: “Our love and support will always be here for you.” “ ...

  8. A note on name individuation and identifying descriptions

    African Journals Online (AJOL)

    Kate H

    used to refer to either the famous philosopher or to the shipping magnate. ..... chain that produced the use of the name is a list containing the generic name and the ... arcane issues concerning currency individuation, object to my claim that I ...

  9. Notes on the genus Digitaria, with descriptions of new species

    NARCIS (Netherlands)

    Henrard, J.Th.

    1934-01-01

    Some years ago I had the opportunity to study more extensively a very interesting group of grasses, belonging to what is now accepted as a distinct genus, the genus Digitaria, formerly belonging as a subgenus to the genus Panicum. As to living plants of this group I was familiar with two european

  10. [Biometric method for the description of the head of an unrecognized corpse for the purpose of personality individualization and identification].

    Science.gov (United States)

    Zviagin, V N; Galitskaia, O I; Negasheva, M A

    2012-01-01

    We have determined absolute dimensions of the head and the relationship between the dimensions of its selected parts. The study enrolled adult subjects (mostly of Russian ethnicity) at the age from 17 to 22 years (1108 men and 1153 women). We calculated the normal values for the estimation of real dimensional characteristics and the frequency of their occurrence in the population. The proposed approach makes it possible to reliably identify the dimensional features of human appearance in terms of the quantitative verbal description (categories 1-5) and to reveal its most characteristic features. The results of this biometric study of the heads of unrecognized corpses obtained by the specially developed technology may be used in operational and search investigations, in the procedure of corpse identification, and forensic medical personality identification of a missing subject.

  11. Analytical dynamics course notes

    CERN Document Server

    Lindenbaum, Samuel D

    1994-01-01

    This book comprises a set of lecture notes on rational mechanics, for part of the graduate physics curriculum, delivered by the late Prof. Shirley L. Quimby during his tenure at Columbia University, New York. The notes contain proofs of basic theorems, derivations of formulae and amplification of observations, as well as the presentation and solution of illustrative problems. Collateral readings from more than 50 source references are indicated at appropriate places in the text.

  12. Note Taking and Note Sharing While Browsing Campaign Information

    DEFF Research Database (Denmark)

    Robertson, Scott P.; Vatrapu, Ravi; Abraham, George

    2009-01-01

    Participants were observed while searching and browsing the internet for campaign information in a mock-voting situation in three online note-taking conditions: No Notes, Private Notes, and Shared Notes. Note taking significantly influenced the manner in which participants browsed for information...

  13. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  14. Description of an identification method of thermocouple time constant based on application of recursive numerical filtering to temperature fluctuation

    International Nuclear Information System (INIS)

    Bernardin, B.; Le Guillou, G.; Parcy, JP.

    1981-04-01

    Usual spectral methods, based on temperature fluctuation analysis, aiming at thermocouple time constant identification are using an equipment too much sophisticated for on-line application. It is shown that numerical filtering is optimal for this application, the equipment is simpler than for spectral methods and less samples of signals are needed for the same accuracy. The method is described and a parametric study was performed using a temperature noise simulator [fr

  15. Rapid review programs to support health care and policy decision making: a descriptive analysis of processes and methods.

    Science.gov (United States)

    Polisena, Julie; Garritty, Chantelle; Kamel, Chris; Stevens, Adrienne; Abou-Setta, Ahmed M

    2015-03-14

    Health care decision makers often need to make decisions in limited timeframes and cannot await the completion of a full evidence review. Rapid reviews (RRs), utilizing streamlined systematic review methods, are increasingly being used to synthesize the evidence with a shorter turnaround time. Our primary objective was to describe the processes and methods used internationally to produce RRs. In addition, we sought to understand the underlying themes associated with these programs. We contacted representatives of international RR programs from a broad realm in health care to gather information about the methods and processes used to produce RRs. The responses were summarized narratively to understand the characteristics associated with their processes and methods. The summaries were compared and contrasted to highlight potential themes and trends related to the different RR programs. Twenty-nine international RR programs were included in our sample with a broad organizational representation from academia, government, research institutions, and non-for-profit organizations. Responses revealed that the main objectives for RRs were to inform decision making with regards to funding health care technologies, services and policy, and program development. Central themes that influenced the methods used by RR programs, and report type and dissemination were the imposed turnaround time to complete a report, resources available, the complexity and sensitivity of the research topics, and permission from the requestor. Our study confirmed that there is no standard approach to conduct RRs. Differences in processes and methods across programs may be the result of the novelty of RR methods versus other types of evidence syntheses, customization of RRs for various decision makers, and definition of 'rapid' by organizations, since it impacts both the timelines and the evidence synthesis methods. Future research should investigate the impact of current RR methods and reporting to

  16. Under-triage in telephone consultation is related to non-normative symptom description and interpersonal communication: a mixed methods study.

    Science.gov (United States)

    Gamst-Jensen, Hejdi; Lippert, Freddy K; Egerod, Ingrid

    2017-05-15

    Telephone consultation and triage are used to limit the workload on emergency departments. Lack of visual cues and clinical tests put telephone consultations to a disadvantage compared to face-to-face consultations increasing the risk of under-triage. Under-triage occurs in telephone triage; however why under-triage happens is not explored yet. The aim of the study was to describe situations of under-triage in context, to assess the quality of under-triaged calls, and to identify communication patterns contributing to under-triage in a regional OOH service in the capital region of Denmark. Explanatory simultaneous mixed method with thematic analysis and descriptive statistics was chosen. The study was carried out in an Out-Of-Hours service (OOH) in the Capital Region of Denmark, Copenhagen. Under-triage was defined as Potentially Under-Triaged Calls (PUTC) by specific criteria to an OOH Hotline, and identification by integration of three databases: Medical Hotline database, Emergency number database, including the Ambulance database, and electronic patient records. Distribution of PUTC were carried out using ICD-10 codes to identify diagnosis and main themes identified by qualitative analysis of audio recorded under-triaged calls. Study period was October 15 th to November 30 th 2014. Three hundred twenty seven PUTC were identified, representing 0.04% of all calls (n = 937.056) to the OOH. Distribution of PUTC according to diagnoses was: digestive (24%), circulatory (19%), respiratory (15%) and all others (42%). Thematic analysis of the voice logs suggested that inadequate communication and non-normative symptom description contributed to under-triage. The incidence of potentially under-triage is low (0.04%). However, the over-representation of digestive, circulatory, and respiratory diagnoses might suggest that under-triage is related to inadequate symptom description. We recommend that caller and call-handler collaborate systematically on problem

  17. The Impact of Novice Counselors' Note-Taking Behavior on Recall and Judgment

    Science.gov (United States)

    Lo, Chu-Ling; Wadsworth, John

    2014-01-01

    Purpose: To examine the effect of note-taking on novice counselors' recall and judgment of interview information in four situations: no notes, taking notes, taking notes and reviewing these notes, and reviewing notes taken by others. Method: The sample included 13 counselors-in-training recruited from a master's level training program in…

  18. Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study.

    Science.gov (United States)

    Shah, Naseem; Mathur, Vijay Prakash; Jain, Veena; Logani, Ajay

    2018-01-01

    Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76%) as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

  19. Physicians’ Progress Notes

    DEFF Research Database (Denmark)

    Bansler, Jørgen; Havn, Erling C.; Mønsted, Troels

    2013-01-01

    in patient care, they have not dealt specifically with the role, structure, and content of the progress notes. As a consequence, CSCW research has not yet taken fully into account the fact that progress notes are coordinative artifacts of a rather special kind, an open-ended chain of prose texts, written...... sequentially by cooperating physicians for their own use as well as for that of their colleagues. We argue that progress notes are the core of the medical record, in that they marshal and summarize the overwhelming amount of data that is available in the modern hospital environment, and that their narrative...... format is uniquely adequate for the pivotal epistemic aspect of cooperative clinical work: the narrative format enables physicians to not only record ‘facts’ but also—by filtering, interpreting, organizing, and qualifying information—to make sense and act concertedly under conditions of uncertainty...

  20. Grouping Notes Through Nodes

    DEFF Research Database (Denmark)

    Dove, Graham; Abildgaard, Sille Julie Jøhnk; Biskjær, Michael Mose

    , both individually and when grouped, and their role in categorisation in semantic long-term memory. To do this, we adopt a multimodal analytical approach focusing on interaction between humans, and between humans and artefacts, alongside language. We discuss in detail examples of four different...... externalisation functions served by Post-ItTM notes, and show how these functions are present in complex overlapping combinations rather than being discrete. We then show how the temporal development of Post-ItTM note interactions supports categorisation qualities of semantic long-term memory....

  1. Grouping Notes Through Nodes

    DEFF Research Database (Denmark)

    Dove, Graham; Abildgaard, Sille Julie; Biskjær, Michael Mose

    2017-01-01

    , both individually and when grouped, and their role in categorisation in semantic long-term memory. To do this, we adopt a multimodal analytical approach focusing on interaction between humans, and between humans and artefacts, alongside language. We discuss in detail examples of four different...... externalisation functions served by Post-ItTM notes, and show how these functions are present in complex overlapping combinations rather than being discrete. We then show how the temporal development of Post-ItTM note interactions supports categorisation qualities of semantic long-term memory....

  2. Comparative description of the use of modern methods of hormonal contraception for women with excessive body mass

    Directory of Open Access Journals (Sweden)

    I. B. Gridina

    2016-04-01

    Full Text Available Maintenance of reproductive health of women with excessive weight is the actual problem of nowadays and is an important direction of modern medicine. Aim. To analyze the efficiency and acceptability of oral, іntravaginal and transdermal hormonal contraceptives among women with excessive body mass. Methods and results. The tolerability and ease of use of different types of hormonal contraception have been studied in 72 women with excessive body mass to determine the reliability and acceptability of modern hormonal contraceptives. It has been investigated that the effectiveness of hormonal contraceptives according to our data is 100%, none patient was registered with an unwanted pregnancy. The total subjective evaluation of all hormonal contraceptives use were positive: 78.6% of women with excessive body mass who used oral contraceptives, were satisfied with the chosen contraceptive method, 81,8% – were satisfied with intravaginal method, 59,1% – transdermal contraceptive. Conclusions. It has been found that intravaginal contraceptive is most suitable as the drug of first choice for women with overweight compared with oral and transdermal hormonal methods of contraception. This suggests that women with excessive body mass can successfully use modern methods of hormonal contraception. But it is necessary to carry out clinical supervision, during which further clarification on the use of hormonal contraception in women with excessive body mass is possible.

  3. Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

    Science.gov (United States)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-12-15

    Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

  4. Identifying What Student Affairs Professionals Value: A Mixed Methods Analysis of Professional Competencies Listed in Job Descriptions

    Science.gov (United States)

    Hoffman, John L.; Bresciani, Marilee J.

    2012-01-01

    This mixed method study explored the professional competencies that administrators expect from entry-, mid-, and senior-level professionals as reflected in 1,759 job openings posted in 2008. Knowledge, skill, and dispositional competencies were identified during the qualitative phase of the study. Statistical analysis of the prevalence of…

  5. Description and pilot results from a novel method for evaluating return of incidental findings from next-generation sequencing technologies.

    Science.gov (United States)

    Goddard, Katrina A B; Whitlock, Evelyn P; Berg, Jonathan S; Williams, Marc S; Webber, Elizabeth M; Webster, Jennifer A; Lin, Jennifer S; Schrader, Kasmintan A; Campos-Outcalt, Doug; Offit, Kenneth; Feigelson, Heather Spencer; Hollombe, Celine

    2013-09-01

    The aim of this study was to develop, operationalize, and pilot test a transparent, reproducible, and evidence-informed method to determine when to report incidental findings from next-generation sequencing technologies. Using evidence-based principles, we proposed a three-stage process. Stage I "rules out" incidental findings below a minimal threshold of evidence and is evaluated using inter-rater agreement and comparison with an expert-based approach. Stage II documents criteria for clinical actionability using a standardized approach to allow experts to consistently consider and recommend whether results should be routinely reported (stage III). We used expert opinion to determine the face validity of stages II and III using three case studies. We evaluated the time and effort for stages I and II. For stage I, we assessed 99 conditions and found high inter-rater agreement (89%), and strong agreement with a separate expert-based method. Case studies for familial adenomatous polyposis, hereditary hemochromatosis, and α1-antitrypsin deficiency were all recommended for routine reporting as incidental findings. The method requires definition of clinically actionable incidental findings and provide documentation and pilot testing of a feasible method that is scalable to the whole genome.

  6. Identification and epidemiological typing of Campylobacter hyointestinalis subspecies by phenotypic and genotypic methods and description of novel subgroups

    DEFF Research Database (Denmark)

    On, Stephan L.W.; Vandamme, P.

    1997-01-01

    of this taxon. Two novel, distinct groups of C. hyointestinalis-like bacteria, originally isolated from the cloacae of Canada geese and human diarrhoeic stools, were also identified by each of the methods used. This appears to be the first report confirming the presence of C. hyointestinalis-like strains from...

  7. Note by Note: a New Revolution in Cooking

    OpenAIRE

    Burke, Roisin; Danaher, Pauline

    2016-01-01

    Note by note cooking is an application of Molecular Gastronomy. It was first proposed by French Physical Chemist and Molecular Gastronomy Co-founder, Hervé This. Note by Note dishes are being created as part of Ph.D. research in the Dublin Institute of Technology, Cathal Brugha Street.

  8. Understanding Digital Note-Taking Practice for Visualization.

    Science.gov (United States)

    Willett, Wesley; Goffin, Pascal; Isenberg, Petra

    2015-05-13

    We present results and design implications from a study of digital note-taking practice to examine how visualization can support revisitation, reflection, and collaboration around notes. As digital notebooks become common forms of external memory, keeping track of volumes of content is increasingly difficult. Information visualization tools can help give note-takers an overview of their content and allow them to explore diverse sets of notes, find and organize related content, and compare their notes with their collaborators. To ground the design of such tools, we conducted a detailed mixed-methods study of digital note-taking practice. We identify a variety of different editing, organization, and sharing methods used by digital note-takers, many of which result in notes becoming "lost in the pile''. These findings form the basis for our design considerations that examine how visualization can support the revisitation, organization, and sharing of digital notes.

  9. Successfully recruiting, surveying, and retaining college students: a description of methods for the Risk, Religiosity, and Emerging Adulthood Study.

    Science.gov (United States)

    Berry, Devon M; Bass, Colleen P

    2012-12-01

    The selection of methods that purposefully reflect the norms of the target population increases the likelihood of effective recruitment, data collection, and retention. In the case of research among college students, researchers' appreciation of college student norms might be skewed by unappreciated generational and developmental differences. Our purpose in this article is to illustrate how attention to the generational and developmental characteristics of college students enhanced the methods of the Risk, Religiosity, and Emerging Adulthood study. We address the following challenges related to research with college students: recruitment, communication, data collection, and retention. Solutions incorporating Internet-based applications (e.g., Facebook) and sensitivity to the generational norms of participants (e.g., multiple means of communication) are described in detail. Copyright © 2012 Wiley Periodicals, Inc.

  10. Descriptive sensory analysis in different classes of orange juice by a robust free-choice profile method.

    Science.gov (United States)

    Pérez Aparicio, Jesús; Toledano Medina, M Angeles; Lafuente Rosales, Victoria

    2007-07-09

    Free-choice profile (FCP), developed in the 1980s, is a sensory analysis method that can be carried out by untrained panels. The participants need only to be able to use a scale and be consumers of the product under evaluation. The data are analysed by sophisticated statistical methodologies like Generalized Procrustean Analysis (GPA) or STATIS. To facilitate a wider use of the free-choice profiling procedure, different authors have advocated simpler methods based on principal components analysis (PCA) of merged data sets. The purpose of this work was to apply another easy procedure to this type of data by means of a robust PCA. The most important characteristic of the proposed method is that quality responsible managers could use this methodology without any scale evaluation. Only the free terms generated by the assessors are necessary to apply the script, thus avoiding the error associated with scale utilization by inexpert assessors. Also, it is possible to use the application with missing data and with differences in the assessors' attendance at sessions. An example was performed to generate the descriptors from different orange juice types. The results were compared with the STATIS method and with the PCA on the merged data sets. The samples evaluated were fresh orange juices with differences in storage days and pasteurized, concentrated and orange nectar drinks from different brands. Eighteen assessors with a low-level training program were used in a six-session free-choice profile framework. The results proved that this script could be of use in marketing decisions and product quality program development.

  11. Description of an Advantageous Optical Label-Free Biosensing Interferometric Read-Out Method to Measure Biological Species

    Directory of Open Access Journals (Sweden)

    Miguel Holgado

    2014-02-01

    Full Text Available In this article we report a new, simple, and reliable optical read-out detection method able to assess Rotavirus present in human sera as well as in the viral pollution sources. It is based on the interference of two interferometers used as biophotonic transducers. The method significantly improves the optical label-free biosensing response measuring both, the concentration of the AgR and its corresponding size. Two different immunoassays were carried out: Bovine Serum Albumin (BSA, and the recognition by its antibody (anti-BSA; and Rotavirus (AgR and the recognition by its antibody (anti-AgR. In the cases studied, and using as model interferometer a simple Fabry-Perot transducer, we demonstrate a biosensing enhancement of two orders of magnitude in the Limit of Detection (LoD. In fact, this read-out optical method may have significant implications to enhance other optical label-free photonic transducers reported in the scientific literature.

  12. Improved Bone Graft Method for Upper Cervical Surgery with Posterior Approach: Technical Description and Report of 52 Cases.

    Science.gov (United States)

    Wang, Yong-Li; Wang, Xiang-Yang

    2018-02-21

    We sought to report a minimum 12 months' follow-up results of our improved bone graft method for upper cervical surgery with the posterior approach. Among 52 consecutive cases, odontoid nonunion occurred in 33 patients, atlantoaxial instability in 11 patients, and occipitocervical deformity in 8 patients who underwent posterior C1-C2 transarticular screw/screw-rod internal fixation (41 cases) and occipitocervical fusion (11 cases) with the improved bone graft technique. Each surgical procedure was performed by the same senior spine surgeon. We took lateral cervical standing roentgenograms before surgery and immediately after surgery. Then we conducted craniocerebral computed tomography examination with reconstruction at 3, 6, 12, and 24 months and annually thereafter. The postoperative follow-up times are about 12-38 months. All cases showed satisfactory screw fixation by radiographic examination, and there were no postoperative neurologic complications. One case had postoperative retropharyngeal infection after the transoral release and posterior reduction by pedicle screw instrumentation. All patients got solid fusions, and no pseudarthrosis occurred. All cases had solid fusions at the 3-month follow-up. Good bone graft bed, enough bone graft material, solid local fixation, and effective bone graft method are prerequisites for a successful bone graft. By analyzing postoperative follow-up in the consecutive cases in this study, our bone graft method describing a new bone graft structure is a reliable posterior fusion technique. It is worth considering, and further research is needed. Copyright © 2018. Published by Elsevier Inc.

  13. "Focused introspection" during naturally increased diuresis: description and repeatability of a method to study bladder sensation non-invasively.

    Science.gov (United States)

    De Wachter, Stefan G G; Heeringa, Rhea; Van Koeveringe, Gommert A; Winkens, Bjorn; Van Kerrebroeck, Philip E V; Gillespie, James I

    2014-06-01

    To present and describe a non-invasive method to study the origin and development of bladder filling sensation and to evaluate the repeatability of the method. Eighteen volunteers participated in the study and were given a water loading protocol consisting of 1,000 ml water intake 1 hr before the session and 200 ml every 10 min during the session. Protocol 1: To evaluate diuresis rate, seven participants were asked to void every 15 min and the voided volume was measured. Protocol 2: Eleven volunteers graded bladder sensation on regular time points, on an empty graph with time on the X-axis and intensity of sensation on the Y-axis. The protocol ended at absolute need to void (maximal intensity) and voided volumes were measured. This protocol was conducted three times with a 10 days interval. Protocol 1: The diuresis rate was not different during the sessions and showed no variation over the studied time period (P = 0.2). Protocol 2: For an individual, the diuresis rate was not different between the sessions. The curves in all patients showed a continuously increasing bladder intensity. In seven participants the curve was convex, in the other four, the curve was sigmoidal. For each individual the pattern was constant during the three sessions. A strict water loading protocol induces a constant diuresis. This allows individuals to draw an introspection bladder sensation curve with a specific shape, which can be used as a method to study the development of bladder sensation non-invasively. © 2013 Wiley Periodicals, Inc.

  14. Contribution of temporal dominance of sensations method to the sensory description of taste properties of commercial green tea brands

    Directory of Open Access Journals (Sweden)

    Noémi Dubová

    2013-03-01

    Full Text Available This paper aims to investigate the most dominant taste attributes of green tea samples in panelists perception over time. In order to assess the samples, a brand new method of sensory evaluation called „Temporal Dominance of Sensations“ was used. The five commercial green tea brands were evaluated by eight trained panelists (students. For each sample of green tea, curves of the dominance of each attribute over time were computed. The TDS curves provided information about the sequence of attributes that were dominant during degustation. This methodology was useful to characterize taste properties of green tea samples.doi:10.5219/274 Normal 0 false false false EN-US X-NONE X-NONE This paper aims to investigate the most dominant taste attributes of green tea samples in panelists perception over time. In order to assess the samples, a brand new method of sensory evaluation called „Temporal Dominance of Sensations“ was used. The five commercial green tea brands were evaluated by eight trained panelists (students. For each sample of green tea, curves of the dominance of each attribute over time were computed. The TDS curves provided information about the sequence of attributes that were dominant during degustation. This methodology was useful to characterize taste properties of green tea samples.doi:10.5219/274

  15. NOTES AND CORRESPONDENCE Evaluation of Tidal Removal Method Using Phase Average Technique from ADCP Surveys along the Peng-Hu Channel in the Taiwan Strait

    Directory of Open Access Journals (Sweden)

    Yu-Chia Chang

    2008-01-01

    Full Text Available Three cruises with shipboard Acoustic Doppler Current Profiler (ADCP were performed along a transect across the Peng-hu Channel (PHC in the Taiwan Strait during 2003 - 2004 in order to investigate the feasibility and accuracy of the phase-averaging method to eliminate tidal components from shipboard ADCP measurement of currents. In each cruise measurement was repeated a number of times along the transect with a specified time lag of either 5, 6.21, or 8 hr, and the repeated data at the same location were averaged to eliminate the tidal currents; this is the so-called ¡§phase-averaging method¡¨. We employed 5-phase-averaging, 4-phase-averaging, 3-phase-averaging, and 2-phase-averaging methods in this study. The residual currents and volume transport of the PHC derived from various phase-averaging methods were intercompared and were also compared with results of the least-square harmonic reduction method proposed by Simpson et al. (1990 and the least-square interpolation method using Gaussian function (Wang et al. 2004. The estimated uncertainty of the residual flow through the PHC derived from the 5-phase-averaging, 4-phase-averaging, 3-phase-averaging, and 2-phase-averaging methods is 0.3, 0.3, 1.3, and 4.6 cm s-1, respectively. Procedures for choosing a best phase average method to remove tidal currents in any particular region are also suggested.

  16. Note Taking for Geography Students.

    Science.gov (United States)

    Kneale, Pauline E.

    1998-01-01

    Addresses geography students' questions about why, when, and how to take notes. Outlines a step-by-step process for taking notes from written sources and from class lectures. Discusses what types of notes are appropriate for various types of sources. Suggests some ideas for making notes useful for individual learning styles. (DSK)

  17. OpenLabNotes

    DEFF Research Database (Denmark)

    List, Markus; Franz, Michael; Tan, Qihua

    2015-01-01

    be advantageous if an ELN was Integrated with a laboratory information management system to allow for a comprehensive documentation of experimental work including the location of samples that were used in a particular experiment. Here, we present OpenLabNotes, which adds state-of-the-art ELN capabilities to Open......LabFramework, a powerful and flexible laboratory information management system. In contrast to comparable solutions, it allows to protect the intellectual property of its users by offering data protection with digital signatures. OpenLabNotes effectively Closes the gap between research documentation and sample management......, thus making Open-Lab Framework more attractive for laboratories that seek to increase productivity through electronic data management....

  18. Technical note: comparison of 3 methods for analyzing areas under the curve for glucose and nonesterified fatty acids concentrations following epinephrine challenge in dairy cows.

    Science.gov (United States)

    Cardoso, F C; Sears, W; LeBlanc, S J; Drackley, J K

    2011-12-01

    The objective of the study was to compare 3 methods for calculating the area under the curve (AUC) for plasma glucose and nonesterified fatty acids (NEFA) after an intravenous epinephrine (EPI) challenge in dairy cows. Cows were assigned to 1 of 6 dietary niacin treatments in a completely randomized 6 × 6 Latin square with an extra period to measure carryover effects. Periods consisted of a 7-d (d 1 to 7) adaptation period followed by a 7-d (d 8 to 14) measurement period. On d 12, cows received an i.v. infusion of EPI (1.4 μg/kg of BW). Blood was sampled at -45, -30, -20, -10, and -5 min before EPI infusion and 2.5, 5, 10, 15, 20, 30, 45, 60, 90, and 120 min after. The AUC was calculated by incremental area, positive incremental area, and total area using the trapezoidal rule. The 3 methods resulted in different statistical inferences. When comparing the 3 methods for NEFA and glucose response, no significant differences among treatments and no interactions between treatment and AUC method were observed. For glucose and NEFA response, the method was statistically significant. Our results suggest that the positive incremental method and the total area method gave similar results and interpretation but differed from the incremental area method. Furthermore, the 3 methods evaluated can lead to different results and statistical inferences for glucose and NEFA AUC after an EPI challenge. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  19. A note on Marx

    OpenAIRE

    Olesen, Finn; Jensen, Frank

    2001-01-01

    Throughout all his life Karl Marx wrote angrily about capitalism. By use of a dialectic approach he was convinced that the working class had to unite and make a social revolution and thereby free them selves from exploitation. Marx himself was in many ways a dialectic person as we try to show in the note. So in some sense he became one with his scientific methodology.

  20. First step towards a non-adiabatic description of the fission process based on the Generator Coordinate Method

    Directory of Open Access Journals (Sweden)

    Lacroix D.

    2010-03-01

    Full Text Available Among the different theoretical approaches able to describe fission, microscopic ones can help us in the understanding of this process, as they have the advantage of describing the nuclear structure and the dynamics in a consistent manner. The sole input of the calculations is the nucleon-nucleon interaction. Such a microscopic time-dependent and quantum mechanical formalism has already been used, based on the Gaussian Overlap Approximation of the Generator Coordinate Method with the adiabatic approximation, to analyze the collective dynamics of low-energy fission in 238U [1]. However, at higher energies, a few MeV above the barrier, the adiabatic approximation doesn’t seem valid anymore. Indeed, manifestations of proton pair breaking have been observed in 238U and 239U for an excitation energy of 2.3 MeV above the barrier [2–4]. Taking the intrinsic excitations into account during the fission process will enable us to determine the coupling between collective and intrinsic degrees of freedom, in particular from saddle to scission. Guidelines of the new formalism under development are presented and some preliminary results on overlaps between non excited and excited states are discussed.

  1. "People like numbers": a descriptive study of cognitive assessment methods in clinical practice for Aboriginal Australians in the Northern Territory.

    Science.gov (United States)

    Dingwall, Kylie M; Pinkerton, Jennifer; Lindeman, Melissa A

    2013-01-31

    Achieving culturally fair assessments of cognitive functioning for Aboriginal people is difficult due to a scarcity of appropriately validated tools for use with this group. As a result, some Aboriginal people with cognitive impairments may lack fair and equitable access to services. The objective of this study was to examine current clinical practice in the Northern Territory regarding cognitive assessment for Aboriginal people thereby providing some guidance for clinicians new to this practice setting. Qualitative enquiry was used to describe practice context, reasons for assessment, and current practices in assessing cognition for Aboriginal Australians. Semi-structured interviews were conducted with 22 clinicians working with Aboriginal clients in central and northern Australia. Results pertaining to assessment methods are reported. A range of standardised tests were utilised with little consistency across clinical practice. Nevertheless, it was recognised that such tests bear severe limitations, requiring some modification and significant caution in their interpretation. Clinicians relied heavily on informal assessment or observations, contextual information and clinical judgement. Cognitive tests developed specifically for Aboriginal people are urgently needed. In the absence of appropriate, validated tests, clinicians have relied on and modified a range of standardised and informal assessments, whilst recognising the severe limitations of these. Past clinical training has not prepared clinicians adequately for assessing Aboriginal clients, and experience and clinical judgment were considered crucial for fair interpretation of test scores. Interpretation guidelines may assist inexperienced clinicians to consider whether they are achieving fair assessments of cognition for Aboriginal clients.

  2. First Step Towards a Non-Adiabatic Description of the Fission Process Based on the Generator Coordinate Method

    International Nuclear Information System (INIS)

    Bernard, R.; Goutte, H.; Gogny, D.; Dubray, N.; Lacroix, D.

    2009-01-01

    Among the different theoretical approaches able to describe fission, microscopic ones can help us in the understanding of this process, as they have the advantage of describing the nuclear structure and the dynamics in a consistent manner. The sole input of the calculations is the nucleon-nucleon interaction. Such a microscopic time-dependent and quantum mechanical formalism has already been used, based on the Gaussian Overlap Approximation of the Generator Coordinate Method with the adiabatic approximation, to analyze the collective dynamics of low-energy fission in 238 U. However, at higher energies, a few MeV above the barrier, the adiabatic approximation doesn't seem valid anymore. Indeed, manifestations of proton pair breaking have been observed in 238 U and 239 U for an excitation energy of 2.3 MeV above the barrier. Taking the intrinsic excitations into account during the fission process will enable us to determine the coupling between collective and intrinsic degrees of freedom, in particular from saddle to scission. Guidelines of the new formalism under development are presented and some preliminary results on overlaps between non excited and excited states are discussed.

  3. Nano-Evaluris: an inhalation and explosion risk evaluation method for nanoparticle use. Part I: description of the methodology

    Science.gov (United States)

    Bouillard, Jacques X.; Vignes, Alexis

    2014-02-01

    In this paper, an inhalation health and explosion safety risk assessment methodology for nanopowders is described. Since toxicological threshold limit values are still unknown for nanosized substances, detailed risk assessment on specific plants may not be carried out. A simple approach based on occupational hazard/exposure band expressed in mass concentrations is proposed for nanopowders. This approach is consolidated with an iso surface toxicological scaling method, which has the merit, although incomplete, to provide concentration threshold levels for which new metrological instruments should be developed for proper air monitoring in order to ensure safety. Whenever the processing or use of nanomaterials is introducing a risk to the worker, a specific nano pictogram is proposed to inform the worker. Examples of risk assessment of process equipment (i.e., containment valves) processing various nanomaterials are provided. Explosion risks related to very reactive nanomaterials such as aluminum nanopowders can be assessed using this new analysis methodology adapted to nanopowders. It is nevertheless found that to formalize and extend this approach, it is absolutely necessary to develop new relevant standard apparatuses and to qualify individual and collective safety barriers with respect to health and explosion risks. In spite of these uncertainties, it appears, as shown in the second paper (Part II) that health and explosion risks, evaluated for given MWCNTs and aluminum nanoparticles, remain manageable in their continuous fabrication mode, considering current individual and collective safety barriers that can be put in place. The authors would, however, underline that peculiar attention must be paid to non-continuous modes of operations, such as process equipment cleaning steps, that are often under-analyzed and are too often forgotten critical steps needing vigilance in order to minimize potential toxic and explosion risks.

  4. Quantitative Computed Tomography Ventriculography for Assessment and Monitoring of Hydrocephalus: A Pilot Study and Description of Method in Subarachnoid Hemorrhage.

    Science.gov (United States)

    Multani, Jasjit Singh; Oermann, Eric Karl; Titano, Joseph; Mascitelli, Justin; Nicol, Kelly; Feng, Rui; Skovrlj, Branko; Pain, Margaret; Mocco, J D; Bederson, Joshua B; Costa, Anthony; Shrivastava, Raj

    2017-08-01

    There is no facile quantitative method for monitoring hydrocephalus (HCP). We propose quantitative computed tomography (CT) ventriculography (qCTV) as a novel computer vision tool for empirically assessing HCP in patients with subarachnoid hemorrhage (SAH). Twenty patients with SAH who were evaluated for ventriculoperitoneal shunt (VPS) placement were selected for inclusion. Ten patients with normal head computed tomography (CTH) findings were analyzed as negative controls. CTH scans were segmented both manually and automatically (by qCTV) to generate measures of ventricular volume. The median manually calculated ventricular volume was 36.1 cm 3 (interquartile range [IQR], 30-115 cm 3 ), which was similar to the median qCTV measured volume of 37.5 cm 3 (IQR, 32-118 cm 3 ) (P = 0.796). Patients undergoing VPS placement demonstrated an increase in median ventricular volume on qCTV from 21 cm 3 to 40 cm 3 on day T-2 and to 51 cm 3 by day 0, a change of 144%. This is in contrast to patients who did not require shunting, in whom median ventricular volume decreased from 16 cm 3 to 14 cm 3 on day T-2 and to 13 cm 3 by day 0, with an average overall volume decrease 19% (P = 0.001). The average change in ventricular volume predicted which patients would require VPS placement, successfully identifying 7 of 10 patients (P = 0.004). Using an optimized cutoff of a change in ventricular volume of 2.5 cm 3 identified all patients who went on to require VPS placement (10 of 10; P = 0.011). qCTV is a reliable means of quantifying ventricular volume and hydrocephalus. This technique offers a new tool for monitoring neurosurgical patients for hydrocephalus, and may be beneficial for use in future research studies, as well as in the routine care of patients with hydrocephalus. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. A note on the relationships between multiple imputation, maximum likelihood and fully Bayesian methods for missing responses in linear regression models.

    Science.gov (United States)

    Chen, Qingxia; Ibrahim, Joseph G

    2014-07-01

    Multiple Imputation, Maximum Likelihood and Fully Bayesian methods are the three most commonly used model-based approaches in missing data problems. Although it is easy to show that when the responses are missing at random (MAR), the complete case analysis is unbiased and efficient, the aforementioned methods are still commonly used in practice for this setting. To examine the performance of and relationships between these three methods in this setting, we derive and investigate small sample and asymptotic expressions of the estimates and standard errors, and fully examine how these estimates are related for the three approaches in the linear regression model when the responses are MAR. We show that when the responses are MAR in the linear model, the estimates of the regression coefficients using these three methods are asymptotically equivalent to the complete case estimates under general conditions. One simulation and a real data set from a liver cancer clinical trial are given to compare the properties of these methods when the responses are MAR.

  6. Use of the bioactive resorbable plate system for zygoma and zygomatic arch replacement and fixation with modified Crockett's method for maxillectomy: A technical note.

    Science.gov (United States)

    Sukegawa, Shintaro; Kanno, Takahiro; Shibata, Akane; Matsumoto, Kenichi; Sukegawa-Takahashi, Yuka; Sakaida, Kyousuke; Furuki, Yoshihiko

    2017-07-01

    As a surgical approach targeting the pterygopalatine fossa following maxillary cancer due to tumor invasion, Crockett's method is conventional and useful. However, if the tumor is confined to the area between the maxilla and pterygopalatine fossa, it is not necessary to include the zygomatico-orbital in the access osteotomy, and the orbital floor may be preserved. Depending on the range of tumor invasion, the current study reports a more minimally invasive, modified Crockett's surgery that may be considered, which includes resection with modified osteotomy lines and repositioning with fixation of the zygoma and zygomatic arch following maxillary cancer ablation. In addition, the majority of patients with advanced maxillary cancer may require postoperative radiotherapy or chemoradiotherapy following maxillectomy according to several guidelines. Therefore, using a low-profile bioactive resorbable plate system as a method of repositioning and fixing the resected and preserved zygoma and zygomatic arch may be more effective in this modified Crockett's method for maxillectomy.

  7. Technical Note : A direct ray-tracing method to compute integral depth dose in pencil beam proton radiography with a multilayer ionization chamber

    NARCIS (Netherlands)

    Farace, Paolo; Righetto, Roberto; Deffet, Sylvain; Meijers, Arturs; Vander Stappen, Francois

    2016-01-01

    Purpose: To introduce a fast ray-tracing algorithm in pencil proton radiography (PR) with a multilayer ionization chamber (MLIC) for in vivo range error mapping. Methods: Pencil beam PR was obtained by delivering spots uniformly positioned in a square (45x45 mm(2) field-of-view) of 9x9 spots capable

  8. Technical note: Development and validation of a new method for the quantification of soluble and micellar calcium, magnesium, and potassium in milk.

    Science.gov (United States)

    Franzoi, M; Niero, G; Penasa, M; Cassandro, M; De Marchi, M

    2018-03-01

    Milk mineral content is a key trait for its role in dairy processes such as cheese-making, its use as source of minerals for newborns, and for all traits involving salt-protein interactions. This study investigated a new method for measuring mineral partition between soluble and micellar fractions in bovine milk after rennet coagulation. A new whey dilution step was added to correct the quantification bias due to whey trapped in curd and excluded volume. Moreover, the proposed method allowed the quantification of the diffusible volume after milk coagulation. Milk mineral content and concentration in whey, and diluted whey were quantified by acid digestion and inductively coupled plasma optical emission spectrometry. The repeatability of the method for micellar Ca, Mg, and K was between 2.07 and 8.96%, whereas reproducibility ranged from 4.01 to 9.44%. Recovery of total milk minerals over 3 spiking levels ranged from 92 to 97%. The proposed method provided an accurate estimation of micellar and soluble minerals in milk, and curd diffusible volume. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. A novel method for the extraction of local gravity wave parameters from gridded three-dimensional data: description, validation, and application

    Directory of Open Access Journals (Sweden)

    L. Schoon

    2018-05-01

    Full Text Available For the local diagnosis of wave properties, we develop, validate, and apply a novel method which is based on the Hilbert transform. It is called Unified Wave Diagnostics (UWaDi. It provides the wave amplitude and three-dimensional wave number at any grid point for gridded three-dimensional data. UWaDi is validated for a synthetic test case comprising two different wave packets. In comparison with other methods, the performance of UWaDi is very good with respect to wave properties and their location. For a first practical application of UWaDi, a minor sudden stratospheric warming on 30 January 2016 is chosen. Specifying the diagnostics for hydrostatic inertia–gravity waves in analyses from the European Centre for Medium-Range Weather Forecasts, we detect the local occurrence of gravity waves throughout the middle atmosphere. The local wave characteristics are discussed in terms of vertical propagation using the diagnosed local amplitudes and wave numbers. We also note some hints on local inertia–gravity wave generation by the stratospheric jet from the detection of shallow slow waves in the vicinity of its exit region.

  10. Technical Note: Reliability of Suchey-Brooks and Buckberry-Chamberlain methods on 3D visualizations from CT and laser scans

    DEFF Research Database (Denmark)

    Villa, Chiara; Buckberry, Jo; Cattaneo, Cristina

    2013-01-01

    Previous studies have reported that the ageing method of Suchey-Brooks (pubic bone) and some of the features applied by Lovejoy et al. and Buckberry-Chamberlain (auricular surface) can be confidently performed on 3D visualizations from CT-scans. In this study, seven observers applied the Suchey......-Brooks and the Buckberry-Chamberlain methods on 3D visualizations based on CT-scans and, for the first time, on 3D visualizations from laser scans. We examined how the bone features can be evaluated on 3D visualizations and whether the different modalities (direct observations of bones, 3D visualization from CT......-observer agreement was obtained in the evaluation of the pubic bone in all modalities. In 3D visualizations of the auricular surfaces, transverse organization and apical changes could be evaluated, although with high inter-observer variability; micro-, macroporosity and surface texture were very difficult to score...

  11. MISCELLANEOUS BOTANICAL NOTES 2

    Directory of Open Access Journals (Sweden)

    A.J.G.H KOSTERMANS

    2014-01-01

    Full Text Available 1.   Durio  cupreus Ridley is considered to  represent a  distinct  species.2.   Durio wyatt-smithii Kosterm. is reported from Borneo.3.   Machilus nervosa Merr. represents Meliosma bontoeensis Merr.4.   Beilschmiedia brassii Allen represents Vavaea brassii (Allen Kosterm.5.   The author of the generic name Heritiera is Aiton.6.   Heritiera macrophylla (non Wall. Merr. is conspecific with H. ungus-tata Pierre.7.   Some specimens from N. Celebes, attributed formerly to H. sylvatica Merr., belong to H. arafurensis Kosterm.8.   Additional note on Heritiera littoralis Ait. and H. macrophylla Wall, ex Kurz.9.   Heritiera   montana   Kosterm.,   nov.   spec,   from   New   Guinea   and H. khidii Kosterm., nov. spec, from Northern Siam.10.   Additional note on Heritiera, novoguineensis Kosterm. and H. pereo-riacea Kosterm. and an undescribed species.11.   Heritiera acuminata Wall, ex Kurz represents a distinct species.12.   Heritiera  solomonensis  Kosterm.,  nov.  spec,  from the  Solomon  Isl.13.   A note on Firmiana bracteata A. DC.14.   Firmiana fulgens (Wall, ex King  Corner is based on a mixtum com-positum and has been the source of constant confusion. For the element, which occurs in Malaysia a new name is coined: F. malayana Kosterm. It does not occur in Tenasserim.15.   A revised bibliography of Firmiana colorata R. Br., F. pallens Stearn and F. malayana Kosterm. is presented.16.   Additional note on Firmiana hainanensis Kosterm.17.   Firmiana kerrii (Craib Kosterm., comb, nov., based on Sterculia kerrii Craib.18.   Additional specimens of Firmiana papuana Mildbr.19.   Cryptocarya hintonii Allen is referred to Primus as Primus hintonii (Allen  Kosterm.20.   Beilschmiedia wallichiana (G. Don   Kosterm., based on Sideroxylon wallichianum, G. Don, is described. Formerly it was relegated to Litsea by Kurz.21.   New species in Lauraceae: Beilschmiedia aborensis Kosterm., B

  12. Notes on functional analysis

    CERN Document Server

    Bhatia, Rajendra

    2009-01-01

    These notes are a record of a one semester course on Functional Analysis given by the author to second year Master of Statistics students at the Indian Statistical Institute, New Delhi. Students taking this course have a strong background in real analysis, linear algebra, measure theory and probability, and the course proceeds rapidly from the definition of a normed linear space to the spectral theorem for bounded selfadjoint operators in a Hilbert space. The book is organised as twenty six lectures, each corresponding to a ninety minute class session. This may be helpful to teachers planning a course on this topic. Well prepared students can read it on their own.

  13. Plot Description (PD)

    Science.gov (United States)

    Robert E. Keane

    2006-01-01

    The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

  14. Quasi-homogenous approximation for description of the properties of dispersed systems. The basic approaches to model hardening processes in nanodispersed silica systems. Part 1. Statical polymer method

    Directory of Open Access Journals (Sweden)

    KUDRYAVTSEV Pavel Gennadievich

    2015-02-01

    Full Text Available The paper deals with possibilities to use quasi-homogenous approximation for discription of properties of dispersed systems. The authors applied statistical polymer method based on consideration of average structures of all possible macromolecules of the same weight. The equiations which allow evaluating many additive parameters of macromolecules and the systems with them were deduced. Statistical polymer method makes it possible to model branched, cross-linked macromolecules and the systems with them which are in equilibrium or non-equilibrium state. Fractal analysis of statistical polymer allows modeling different types of random fractal and other objects examined with the mehods of fractal theory. The method of fractal polymer can be also applied not only to polymers but also to composites, gels, associates in polar liquids and other packaged systems. There is also a description of the states of colloid solutions of silica oxide from the point of view of statistical physics. This approach is based on the idea that colloid solution of silica dioxide – sol of silica dioxide – consists of enormous number of interacting particles which are always in move. The paper is devoted to the research of ideal system of colliding but not interacting particles of sol. The analysis of behavior of silica sol was performed according to distribution Maxwell-Boltzmann and free path length was calculated. Using this data the number of the particles which can overcome the potential barrier in collision was calculated. To model kinetics of sol-gel transition different approaches were studied.

  15. Notes on black holes and three dimensional gravity

    International Nuclear Information System (INIS)

    Banados, Maximo

    1999-01-01

    In these notes we review some relevant results on 2+1 quantum gravity. These include the Chern-Simons formulation and its affine Kac-Moody symmetry, the asymptotic algebra of Brown and Henneaux, and the statistical mechanics description of 2+1 black holes. A brief introduction to the classical and semiclassical aspects of black holes is also included. The level of the notes is basic assuming only some knowledge on Statistical Mechanics, General Relativity and Yang-Mills theory

  16. Technical Note: Impact of the geometry dependence of the ion chamber detector response function on a convolution-based method to address the volume averaging effect

    Energy Technology Data Exchange (ETDEWEB)

    Barraclough, Brendan; Lebron, Sharon [Department of Radiation Oncology, University of Florida, Gainesville, Florida 32608 and J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, Florida 32611 (United States); Li, Jonathan G.; Fan, Qiyong; Liu, Chihray; Yan, Guanghua, E-mail: yangua@shands.ufl.edu [Department of Radiation Oncology, University of Florida, Gainesville, Florida 32608 (United States)

    2016-05-15

    Purpose: To investigate the geometry dependence of the detector response function (DRF) of three commonly used scanning ionization chambers and its impact on a convolution-based method to address the volume averaging effect (VAE). Methods: A convolution-based approach has been proposed recently to address the ionization chamber VAE. It simulates the VAE in the treatment planning system (TPS) by iteratively convolving the calculated beam profiles with the DRF while optimizing the beam model. Since the convolved and the measured profiles are subject to the same VAE, the calculated profiles match the implicit “real” ones when the optimization converges. Three DRFs (Gaussian, Lorentzian, and parabolic function) were used for three ionization chambers (CC04, CC13, and SNC125c) in this study. Geometry dependent/independent DRFs were obtained by minimizing the difference between the ionization chamber-measured profiles and the diode-measured profiles convolved with the DRFs. These DRFs were used to obtain eighteen beam models for a commercial TPS. Accuracy of the beam models were evaluated by assessing the 20%–80% penumbra width difference (PWD) between the computed and diode-measured beam profiles. Results: The convolution-based approach was found to be effective for all three ionization chambers with significant improvement for all beam models. Up to 17% geometry dependence of the three DRFs was observed for the studied ionization chambers. With geometry dependent DRFs, the PWD was within 0.80 mm for the parabolic function and CC04 combination and within 0.50 mm for other combinations; with geometry independent DRFs, the PWD was within 1.00 mm for all cases. When using the Gaussian function as the DRF, accounting for geometry dependence led to marginal improvement (PWD < 0.20 mm) for CC04; the improvement ranged from 0.38 to 0.65 mm for CC13; for SNC125c, the improvement was slightly above 0.50 mm. Conclusions: Although all three DRFs were found adequate to

  17. Technical Note: Radiation properties of tissue- and water-equivalent materials formulated using the stoichiometric analysis method in charged particle therapy

    Energy Technology Data Exchange (ETDEWEB)

    Yohannes, Indra; Vasiliniuc, Stefan [Radiation Oncology, University Hospital Erlangen, Erlangen 91054 (Germany); Hild, Sebastian [Faculty of Medicine, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen 91054, Germany and Department of Biophysics, GSI - Helmholtz Centre for Heavy Ion Research, Darmstadt 64291 (Germany); Langner, Oliver [QRM - Quality Assurance in Radiology and Medicine GmbH, Möhrendorf 91096 (Germany); Graeff, Christian [Department of Biophysics, GSI - Helmholtz Centre for Heavy Ion Research, Darmstadt 64291 (Germany); Bert, Christoph, E-mail: christoph.bert@uk-erlangen.de [Radiation Oncology, University Hospital Erlangen, Erlangen 91054 (Germany); Faculty of Medicine, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen 91054 (Germany); Department of Biophysics, GSI - Helmholtz Centre for Heavy Ion Research, Darmstadt 64291 (Germany)

    2016-01-15

    Purpose: Five tissue- and water-equivalent materials (TEMs) mimicking ICRU real tissues have been formulated using a previously established stoichiometric analysis method (SAM) to be applied in charged particle therapy. The purpose of this study was an experimental verification of the TEMs-SAM against charged particle beam measurements and for different computed tomography (CT) scanners. The potential of the TEMs-SAM to be employed in the dosimetry was also investigated. Methods: Experimental verification with three CT scanners was carried out to validate the calculated Hounsfield units (HUs) of the TEMs. Water-equivalent path lengths (WEPLs) of the TEMs for proton (106.8 MeV/u), helium (107.93 MeV/u), and carbon (200.3 MeV/u) ions were measured to be compared with the computed relative stopping powers. HU calibration curves were also generated. Results: Differences between the measured HUs of the TEMs and the calculated HUs of the ICRU real tissues for all CT scanners were smaller than 4 HU except for the skeletal tissues which deviated up to 21 HU. The measured WEPLs verified the calculated WEPLs of the TEMs (maximum deviation was 0.17 mm) and were in good agreement with the calculated WEPLs of the ICRU real tissues (maximum deviation was 0.23 mm). Moreover, the relative stopping powers converted from the measured WEPLs differed less than 0.8% and 1.3% from the calculated values of the SAM and the ICRU, respectively. Regarding the relative nonelastic cross section per unit of volume for 200 MeV protons, the ICRU real tissues were generally well represented by the TEMs except for adipose which differed 3.8%. Further, the HU calibration curves yielded the mean and the standard deviation of the errors not larger than 0.5% and 1.9%, respectively. Conclusions: The results of this investigation implied the potential of the TEMs formulated using the SAM to be employed for both, beam dosimetry and HU calibration in charged particle therapy.

  18. Technical Note: A direct ray-tracing method to compute integral depth dose in pencil beam proton radiography with a multilayer ionization chamber.

    Science.gov (United States)

    Farace, Paolo; Righetto, Roberto; Deffet, Sylvain; Meijers, Arturs; Vander Stappen, Francois

    2016-12-01

    To introduce a fast ray-tracing algorithm in pencil proton radiography (PR) with a multilayer ionization chamber (MLIC) for in vivo range error mapping. Pencil beam PR was obtained by delivering spots uniformly positioned in a square (45 × 45 mm 2 field-of-view) of 9 × 9 spots capable of crossing the phantoms (210 MeV). The exit beam was collected by a MLIC to sample the integral depth dose (IDD MLIC ). PRs of an electron-density and of a head phantom were acquired by moving the couch to obtain multiple 45 × 45 mm 2 frames. To map the corresponding range errors, the two-dimensional set of IDD MLIC was compared with (i) the integral depth dose computed by the treatment planning system (TPS) by both analytic (IDD TPS ) and Monte Carlo (IDD MC ) algorithms in a volume of water simulating the MLIC at the CT, and (ii) the integral depth dose directly computed by a simple ray-tracing algorithm (IDD direct ) through the same CT data. The exact spatial position of the spot pattern was numerically adjusted testing different in-plane positions and selecting the one that minimized the range differences between IDD direct and IDD MLIC . Range error mapping was feasible by both the TPS and the ray-tracing methods, but very sensitive to even small misalignments. In homogeneous regions, the range errors computed by the direct ray-tracing algorithm matched the results obtained by both the analytic and the Monte Carlo algorithms. In both phantoms, lateral heterogeneities were better modeled by the ray-tracing and the Monte Carlo algorithms than by the analytic TPS computation. Accordingly, when the pencil beam crossed lateral heterogeneities, the range errors mapped by the direct algorithm matched better the Monte Carlo maps than those obtained by the analytic algorithm. Finally, the simplicity of the ray-tracing algorithm allowed to implement a prototype procedure for automated spatial alignment. The ray-tracing algorithm can reliably replace the TPS method in MLIC PR for in

  19. Technical note: a noninvasive method for measuring mammary apoptosis and epithelial cell activation in dairy animals using microparticles extracted from milk.

    Science.gov (United States)

    Pollott, G E; Wilson, K; Jerram, L; Fowkes, R C; Lawson, C

    2014-01-01

    Milk production from dairy animals has been described in terms of 3 processes: the increase in secretory cell numbers in late pregnancy and early lactation, secretion rate of milk per cell, and the decline in cell numbers as lactation progresses. This latter process is thought to be determined by the level of programmed cell death (apoptosis) found in the animal. Until now, apoptosis has been measured by taking udder biopsies, using magnetic resonance imaging scans, or using animals postmortem. This paper describes an alternative, noninvasive method for estimating apoptosis by measuring microparticles in milk samples. Microparticles are the product of several processes in dairy animals, including apoptosis. Milk samples from 12 Holstein cows, at or past peak lactation, were collected at 5 monthly samplings. The samples (n=57) were used to measure the number of microparticles and calculate microparticle density for 4 metrics: annexin V positive and merocyanine 540 dye positive, for both and total particles, in both whole milk (WM) and spun milk. Various measures of milk production were also recorded for the 12 cows, including daily milk yield, fat and protein percentage in the milk, somatic cell count, and the days in milk when the samples were taken. A high correlation was found between the 4 WM microparticle densities and days in milk (0.46 to 0.64), and a moderate correlation between WM microparticle densities and daily milk yield (-0.33 to -0.44). No significant relationships were found involving spun milk samples, somatic cell count, or fat and protein percentage. General linear model analyses revealed differences between cows for both level of microparticle density and its rate of change in late lactation. Persistency of lactation was also found to be correlated with the WM microparticle traits (-0.65 to -0.32). As apoptosis is likely to be the major contributor to microparticle numbers in late lactation, this work found a noninvasive method for estimating

  20. Technical Note: Radiation properties of tissue- and water-equivalent materials formulated using the stoichiometric analysis method in charged particle therapy

    International Nuclear Information System (INIS)

    Yohannes, Indra; Vasiliniuc, Stefan; Hild, Sebastian; Langner, Oliver; Graeff, Christian; Bert, Christoph

    2016-01-01

    Purpose: Five tissue- and water-equivalent materials (TEMs) mimicking ICRU real tissues have been formulated using a previously established stoichiometric analysis method (SAM) to be applied in charged particle therapy. The purpose of this study was an experimental verification of the TEMs-SAM against charged particle beam measurements and for different computed tomography (CT) scanners. The potential of the TEMs-SAM to be employed in the dosimetry was also investigated. Methods: Experimental verification with three CT scanners was carried out to validate the calculated Hounsfield units (HUs) of the TEMs. Water-equivalent path lengths (WEPLs) of the TEMs for proton (106.8 MeV/u), helium (107.93 MeV/u), and carbon (200.3 MeV/u) ions were measured to be compared with the computed relative stopping powers. HU calibration curves were also generated. Results: Differences between the measured HUs of the TEMs and the calculated HUs of the ICRU real tissues for all CT scanners were smaller than 4 HU except for the skeletal tissues which deviated up to 21 HU. The measured WEPLs verified the calculated WEPLs of the TEMs (maximum deviation was 0.17 mm) and were in good agreement with the calculated WEPLs of the ICRU real tissues (maximum deviation was 0.23 mm). Moreover, the relative stopping powers converted from the measured WEPLs differed less than 0.8% and 1.3% from the calculated values of the SAM and the ICRU, respectively. Regarding the relative nonelastic cross section per unit of volume for 200 MeV protons, the ICRU real tissues were generally well represented by the TEMs except for adipose which differed 3.8%. Further, the HU calibration curves yielded the mean and the standard deviation of the errors not larger than 0.5% and 1.9%, respectively. Conclusions: The results of this investigation implied the potential of the TEMs formulated using the SAM to be employed for both, beam dosimetry and HU calibration in charged particle therapy

  1. Parents' knowledge, attitudes, use of pain relief methods and satisfaction related to their children's postoperative pain management: a descriptive correlational study.

    Science.gov (United States)

    Chng, Hui Yi; He, Hong-Gu; Chan, Sally Wai-Chi; Liam, Joanne Li Wee; Zhu, Lixia; Cheng, Karis Kin Fong

    2015-06-01

    To examine parents' knowledge about and attitudes towards pain management, use of pain relief strategies and satisfaction with their children's postoperative pain management, as well as the relationships among these variables. Children's postoperative pain is inadequately managed worldwide. Despite increasing emphasis on parental involvement in children's postoperative pain management, few studies have examined parents' management of their child's postoperative pain in Singapore. A descriptive correlational study. A convenience sample of 60 parents having 6- to 14-year-old children undergoing inpatient elective surgery in a public hospital in Singapore was recruited. Data were collected one day after each child's surgery using the Pain Management Knowledge and Attitudes questionnaire and the Parents' Use of Pain Relief Strategies questionnaire. Descriptive statistics, Mann-Whitney U tests, Kruskal-Wallis tests and Spearman's rank correlation coefficient were used for data analyses. Parents displayed moderate levels of knowledge, attitudes and use of pain relief methods in relation to their children's postoperative pain and pain management. They were generally satisfied with the management of their child's postoperative pain. There was significant difference in Parents' Use of Pain Relief Strategies scores between parents with and without previous experience of caring for their hospitalised child. Statistically significant positive correlations were found between parents' knowledge and attitude, knowledge and satisfaction, attitude and satisfaction, knowledge and pain relief strategies, as well as attitude and pain relief strategies. This study indicates the need to provide parents with more information regarding their children's postoperative pain management. Future studies are needed to develop educational interventions for parents to improve their knowledge and attitudes, which will eventually improve their use of pain relief strategies for their children. Health

  2. Technical note: optimization for improved tube-loading efficiency in the dual-energy computed tomography coupled with balanced filter method.

    Science.gov (United States)

    Saito, Masatoshi

    2010-08-01

    This article describes the spectral optimization of dual-energy computed tomography using balanced filters (bf-DECT) to reduce the tube loadings and dose by dedicating to the acquisition of electron density information, which is essential for treatment planning in radiotherapy. For the spectral optimization of bf-DECT, the author calculated the beam-hardening error and air kerma required to achieve a desired noise level in an electron density image of a 50-cm-diameter cylindrical water phantom. The calculation enables the selection of beam parameters such as tube voltage, balanced filter material, and its thickness. The optimal combination of tube voltages was 80 kV/140 kV in conjunction with Tb/Hf and Bi/Mo filter pairs; this combination agrees with that obtained in a previous study [M. Saito, "Spectral optimization for measuring electron density by the dual-energy computed tomography coupled with balanced filter method," Med. Phys. 36, 3631-3642 (2009)], although the thicknesses of the filters that yielded a minimum tube output were slightly different from those obtained in the previous study. The resultant tube loading of a low-energy scan of the present bf-DECT significantly decreased from 57.5 to 4.5 times that of a high-energy scan for conventional DECT. Furthermore, the air kerma of bf-DECT could be reduced to less than that of conventional DECT, while obtaining the same figure of merit for the measurement of electron density and effective atomic number. The tube-loading and dose efficiencies of bf-DECT were considerably improved by sacrificing the quality of the noise level in the images of effective atomic number.

  3. Notes on quantum groups

    International Nuclear Information System (INIS)

    Pressley, A.; Chari, V.; Tata Inst. of Fundamental Research, Bombay

    1990-01-01

    The authors presents an introduction to quantum groups defined as a deformation of the universal enveloping algebra of a Lie algebra. After the description of Hopf algebras with some examples the approach of Drinfel'd and Jimbo is described, where the quantization of a Lie algebra represents a Hopf algebra, defined over the algebra of formal power series in an indetermined h. The authors show that this approach arises from a r-matrix, which satisfies the classical Yang-Baxter equation. As example quantum sl 2 is considered. Furthermore the approaches of Manin and Woroniwicz and the R-matrix approach are described. (HSI)

  4. Technical Note: Radiation properties of tissue- and water-equivalent materials formulated using the stoichiometric analysis method in charged particle therapy.

    Science.gov (United States)

    Yohannes, Indra; Hild, Sebastian; Vasiliniuc, Stefan; Langner, Oliver; Graeff, Christian; Bert, Christoph

    2016-01-01

    Five tissue- and water-equivalent materials (TEMs) mimicking ICRU real tissues have been formulated using a previously established stoichiometric analysis method (SAM) to be applied in charged particle therapy. The purpose of this study was an experimental verification of the TEMs-SAM against charged particle beam measurements and for different computed tomography (CT) scanners. The potential of the TEMs-SAM to be employed in the dosimetry was also investigated. Experimental verification with three CT scanners was carried out to validate the calculated Hounsfield units (HUs) of the TEMs. Water-equivalent path lengths (WEPLs) of the TEMs for proton (106.8 MeV/u), helium (107.93 MeV/u), and carbon (200.3 MeV/u) ions were measured to be compared with the computed relative stopping powers. HU calibration curves were also generated. Differences between the measured HUs of the TEMs and the calculated HUs of the ICRU real tissues for all CT scanners were smaller than 4 HU except for the skeletal tissues which deviated up to 21 HU. The measured WEPLs verified the calculated WEPLs of the TEMs (maximum deviation was 0.17 mm) and were in good agreement with the calculated WEPLs of the ICRU real tissues (maximum deviation was 0.23 mm). Moreover, the relative stopping powers converted from the measured WEPLs differed less than 0.8% and 1.3% from the calculated values of the SAM and the ICRU, respectively. Regarding the relative nonelastic cross section per unit of volume for 200 MeV protons, the ICRU real tissues were generally well represented by the TEMs except for adipose which differed 3.8%. Further, the HU calibration curves yielded the mean and the standard deviation of the errors not larger than 0.5% and 1.9%, respectively. The results of this investigation implied the potential of the TEMs formulated using the SAM to be employed for both, beam dosimetry and HU calibration in charged particle therapy.

  5. The X-Ray Pebble Recirculation Experiment (X-PREX): Facility Description, Preliminary Discrete Element Method Simulation Validation Studies, and Future Test Program

    International Nuclear Information System (INIS)

    Laufer, Michael R.; Bickel, Jeffrey E.; Buster, Grant C.; Krumwiede, David L.; Peterson, Per F.

    2014-01-01

    This paper presents a facility description, preliminary results, and future test program of the new X-Ray Pebble Recirculation Experiment (X-PREX), which is now operational and being used to collect data on the behavior of slow dense granular flows relevant to pebble bed reactor core designs. The X-PREX facility uses digital x-ray tomography methods to track both the translational and rotational motion of spherical pebbles, which provides unique experimental results that can be used to validate discrete element method (DEM) simulations of pebble motion. The validation effort supported by the X-PREX facility provides a means to build confidence in analysis of pebble bed configuration and residence time distributions that impact the neutronics, thermal hydraulics, and safety analysis of pebble bed reactor cores. Preliminary experimental and DEM simulation results are reported for silo drainage, a classical problem in the granular flow literature, at several hopper angles. These studies include conventional converging and novel diverging geometries that provide additional flexibility in the design of pebble bed reactor cores. Excellent agreement is found between the X-PREX experimental and DEM simulation results. Finally, this paper discusses additional studies in progress relevant to the design and analysis of pebble bed reactor cores including pebble recirculation in cylindrical core geometries and evaluation of forces on shut down blades inserted directly into a packed pebble bed. (author)

  6. Verification study on technology for site investigation for geological disposal. Confirmation of the applicability of survey methods through establishing site descriptive models in accordance with stepwise investigation approach

    International Nuclear Information System (INIS)

    Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Hamada, Takaomi; Yoshimura, Kimitaka

    2014-01-01

    The Yokosuka Demonstration and Validation Project, which uses the Yokosuka Central Research Institute of Electric Power Industry (CRIEPI) site, a Neogene sedimentary and coastal environment, has been conducted since the 2006 fiscal year as a cooperative research project between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project were to examine and refine the basic methodology of the investigation and assessment in accordance with the conditions of geological environment at each stage of investigations from the surface (Preliminary Investigation and the first half of Detailed Investigation conducted by NUMO) for high level radioactive waste geological disposal. Within investigation technologies at these early stages, a borehole survey is an important means of directly obtaining various properties of the deep geological environment. On the other hand, surface geophysical prospecting data provide information about the geological and resistivity structures at depth for planning borehole surveys. During the 2006-2009 fiscal years, a series of on-site surveys and tests, including borehole surveys of YDP-1 (depth: 350 m) and YDP-2 (depth: 500 m), were conducted in this test site. Furthermore, seismic surveys (including seismic reflection method) and electromagnetic surveys (including magnetotelluric method) were conducted within the expanded CRIEPI site in the 2010 fiscal year to obtain information about the geological structure, and the resistivity structure reflecting the distribution of the salt water/fresh water boundary, respectively, to a depth of over several hundred meters. The validity of existing survey and testing methods for stepwise investigations (from surface to borehole surveys) for obtaining properties of the geological environment (in various conditions relating to differences in the properties of the Miura and the Hayama Groups at this site) was confirmed through establishing site descriptive models based on

  7. Reading Queer Television: Some Notes on Method

    Science.gov (United States)

    Marshall, Daniel

    2016-01-01

    In this article the author presents his reflection on the framing of mass queer television as a technology within the cultural politics of gender and sexuality; and, next, discusses the mass production of these representations in terms of the mass production of modes of intelligibility of LGBT subjects. To narrow the argument, he focuses his…

  8. Unified Modeling Language description of the object-oriented multi-scale adaptive finite element method for Step-and-Flash Imprint Lithography Simulations

    International Nuclear Information System (INIS)

    Paszynski, Maciej; Gurgul, Piotr; Sieniek, Marcin; Pardo, David

    2010-01-01

    In the first part of the paper we present the multi-scale simulation of the Step-and-Flash Imprint Lithography (SFIL), a modern patterning process. The simulation utilizes the hp adaptive Finite Element Method (hp-FEM) coupled with Molecular Statics (MS) model. Thus, we consider the multi-scale problem, with molecular statics applied in the areas of the mesh where the highest accuracy is required, and the continuous linear elasticity with thermal expansion coefficient applied in the remaining part of the domain. The degrees of freedom from macro-scale element's nodes located on the macro-scale side of the interface have been identified with particles from nano-scale elements located on the nano-scale side of the interface. In the second part of the paper we present Unified Modeling Language (UML) description of the resulting multi-scale application (hp-FEM coupled with MS). We investigated classical, procedural codes from the point of view of the object-oriented (O-O) programming paradigm. The discovered hierarchical structure of classes and algorithms makes the UML project as independent on the spatial dimension of the problem as possible. The O-O UML project was defined at an abstract level, independent on the programming language used.

  9. The description of dense hydrogen with Wave Packet Molecular Dynamics (WPMD) simulations; Die Beschreibung von dichtem Wasserstoff mit der Methode der Wellenpaket-Molekulardynamik (WPMD)

    Energy Technology Data Exchange (ETDEWEB)

    Jakob, B.

    2006-10-10

    In this work the wave packet molecular dynamics (WPMD) is presented and applied to dense hydrogen. In the WPMD method the electrons are described by a slater determinant of periodic Gaussian wave packets. Each single particle wave function can parametrised through 8 coordinates which can be interpreted as the position and momentum, the width and its conjugate momentum. The equation of motion for these coordinates can be derived from a time depended variational principle. Properties of the equilibrium can be ascertained by a Monte Carlo simulation. With the now completely implemented antisymmetrisation the simulation yields a fundamental different behavior for dense hydrogen compare to earlier simplified models. The results show a phase transition to metallic hydrogen with a higher density than in the molecular phase. This behavior has e.g. a large implication to the physics of giant planets. This work describes the used model and explains in particular the calculation of the energy and forces. The periodicity of the wave function leads to a description in the Fourier space. The antisymmetrisation is done by Matrix operations. Moreover the numerical implementation is described in detail to allow the further development of the code. The results provided in this work show the equation of state in the temperature range 300K - 50000K an density 10{sup 23}-10{sup 24} cm{sup -3}, according a pressure 1 GPa-1000 GPa. In a phase diagram the phase transition to metallic hydrogen can be red off. The electrical conductivity of both phases is destined. (orig.)

  10. An all time low utilization of intrauterine contraceptive device as a birth spacing method--a qualitative descriptive study in district Rawalpindi, Pakistan.

    Science.gov (United States)

    Khan, Amna; Shaikh, Babar Tasneem

    2013-02-09

    Pakistan was among the leading countries in south Asia which started the family planning program in late 50s, forecasting the need to control the population. Despite this early intervention, fertility rate has declined but slower in Pakistan as compared to most other Asian countries. Pakistan has almost a stagnant contraceptive prevalence rate for more than a decade now, perhaps owing to the inadequate performance of the family planning programs. The provision and use of long term contraceptives such as IUCD has always been low (around 2%) and associated with numerous issues. Married women who want to wait before having another child, or end childbearing altogether, are not using any long term method of contraception. A descriptive qualitative study was conducted from May to July 2012, to explore and understand the perceptions of women regarding the use of IUCDs and to understand the challenges/issues at the service provider's end. Six FGDs with community women and 12 in-depth interviews were conducted with family planning providers. The data was analyzed using the Qualitative Content Analysis approach. The study revealed that the family planning clients are reluctant to use IUCDs because of a number of myths and misconceptions associated with the method. They have reservations about the provider's capability and quality of care at the facility. Private health providers are not motivated and are reluctant to provide the IUCDs because of inadequate counseling skills, lack of competence and improper supporting infrastructure. Government programs either do not have enough supplies or trained staff to promote the IUCD utilization. Besides a well-designed community awareness campaign, providers' communication and counseling skills have to be enhanced, as these are major contributing factors in IUCD acceptance. Ongoing training of all family planning service providers in IUCD insertion is very important, along with strengthening of their services.

  11. An all time low utilization of intrauterine contraceptive device as a birth spacing method- a qualitative descriptive study in district Rawalpindi, Pakistan

    Directory of Open Access Journals (Sweden)

    Khan Amna

    2013-02-01

    Full Text Available Abstract Background Pakistan was among the leading countries in south Asia which started the family planning program in late 50s, forecasting the need to control the population. Despite this early intervention, fertility rate has declined but slower in Pakistan as compared to most other Asian countries. Pakistan has almost a stagnant contraceptive prevalence rate for more than a decade now, perhaps owing to the inadequate performance of the family planning programs. The provision and use of long term contraceptives such as IUCD has always been low (around 2% and associated with numerous issues. Married women who want to wait before having another child, or end childbearing altogether, are not using any long term method of contraception. Methodology A descriptive qualitative study was conducted from May to July 2012, to explore and understand the perceptions of women regarding the use of IUCDs and to understand the challenges/issues at the service provider’s end. Six FGDs with community women and 12 in-depth interviews were conducted with family planning providers. The data was analyzed using the Qualitative Content Analysis approach. Results The study revealed that the family planning clients are reluctant to use IUCDs because of a number of myths and misconceptions associated with the method. They have reservations about the provider’s capability and quality of care at the facility. Private health providers are not motivated and are reluctant to provide the IUCDs because of inadequate counseling skills, lack of competence and improper supporting infrastructure. Government programs either do not have enough supplies or trained staff to promote the IUCD utilization. Conclusion Besides a well-designed community awareness campaign, providers’ communication and counseling skills have to be enhanced, as these are major contributing factors in IUCD acceptance. Ongoing training of all family planning service providers in IUCD insertion is very

  12. Notes in Colombian Herpetology, II Notes in Colombian Herpetology, II

    Directory of Open Access Journals (Sweden)

    Dunn Emmett Reid

    1944-03-01

    Full Text Available The Lizard Genus Echinosaura (Teiidae in Colombia / Notes on the habits of the Tadpole-Carrying Frog Hyloxalus granuliventris / A New Marsupian Frog (Gastrotheca from Colombia The Lizard Genus Echinosaura (Teiidae in Colombia / Notes on the habits of the Tadpole-Carrying Frog Hyloxalus granuliventris / A New Marsupian Frog (Gastrotheca from Colombia.

  13. Notes on Three Newly Naturalized Plants in Taiwan

    Directory of Open Access Journals (Sweden)

    Shih-Huei Chen

    2005-03-01

    Full Text Available Chloris divaricata R. Br. var. cynodontoides (Bal. Lazarides, Boerhavia coccinea Mill., and Hyptis pectinata (L. Poit. are recently found naturalized in Taiwan. The present study gives the taxonomic description and line drawings of the three species. In addition, their distribution and notes on ecology and taxonomy are provided.

  14. Improving operation notes to meet British Orthopaedic Association guidelines.

    Science.gov (United States)

    Morgan, David; Fisher, Noel; Ahmad, Aman; Alam, Fazle

    2009-04-01

    Operation notes are an important part of medical records for clinical, academic and medicolegal reasons. This study audited the quality of operative note keeping for total knee replacements against the standards set by the British Orthopaedic Association (BOA). A prospective review of all patients undergoing total knee replacement at a district general hospital over 8 months. Data recorded were compared with those required by the BOA good-practice guidelines. Change in practice was implemented and the audit cycle completed. Data were statistically analysed. A total of 129 operation notes were reviewed. There was a significant improvement in the mean number of data points recorded from 9.6 to 13.1. The least well recorded data were diagnosis, description of findings, alignment and postoperative flexion range. All had a significant improvement except description of findings. The operating surgeon writing the note improved from 56% to 67%. Detailed postoperative instructions also improved in quality. Surgeon education and the use of a checklist produce better quality total knee replacement operation notes in line with BOA guidelines. Further improvements may be made by making the data points part of the operation note itself.

  15. SU-G-BRC-08: Evaluation of Dose Mass Histogram as a More Representative Dose Description Method Than Dose Volume Histogram in Lung Cancer Patients

    Energy Technology Data Exchange (ETDEWEB)

    Liu, J; Eldib, A; Ma, C [Fox Chase Cancer Center, Philadelphia, PA (United States); Lin, M [The University of Texas Southwestern Medical Ctr, Dallas, TX (United States); Li, J [Cyber Medical Inc, Xian, Shaanxi (China); Mora, G [Universidade de Lisboa, Codex, Lisboa (Portugal)

    2016-06-15

    Purpose: Dose-volume-histogram (DVH) is widely used for plan evaluation in radiation treatment. The concept of dose-mass-histogram (DMH) is expected to provide a more representative description as it accounts for heterogeneity in tissue density. This study is intended to assess the difference between DVH and DMH for evaluating treatment planning quality. Methods: 12 lung cancer treatment plans were exported from the treatment planning system. DVHs for the planning target volume (PTV), the normal lung and other structures of interest were calculated. DMHs were calculated in a similar way as DVHs expect that the voxel density converted from the CT number was used in tallying the dose histogram bins. The equivalent uniform dose (EUD) was calculated based on voxel volume and mass, respectively. The normal tissue complication probability (NTCP) in relation to the EUD was calculated for the normal lung to provide quantitative comparison of DVHs and DMHs for evaluating the radiobiological effect. Results: Large differences were observed between DVHs and DMHs for lungs and PTVs. For PTVs with dense tumor cores, DMHs are higher than DVHs due to larger mass weighing in the high dose conformal core regions. For the normal lungs, DMHs can either be higher or lower than DVHs depending on the target location within the lung. When the target is close to the lower lung, DMHs show higher values than DVHs because the lower lung has higher density than the central portion or the upper lung. DMHs are lower than DVHs for targets in the upper lung. The calculated NTCPs showed a large range of difference between DVHs and DMHs. Conclusion: The heterogeneity of lung can be well considered using DMH for evaluating target coverage and normal lung pneumonitis. Further studies are warranted to quantify the benefits of DMH over DVH for plan quality evaluation.

  16. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  17. A note on axial symmetries

    International Nuclear Information System (INIS)

    Beetle, Christopher; Wilder, Shawn

    2015-01-01

    This note describes how to characterize and normalize an axial Killing field on a general Riemannian geometry or four-dimensional Lorentzian geometry. No global assumptions are necessary, such as that the orbits of the Killing field all have period 2π. Rather, any Killing field that vanishes at at least one point necessarily has the expected global properties. (note)

  18. The Anatomy of a Note.

    Science.gov (United States)

    Moore, Herb

    1986-01-01

    Suggests that students can learn the physics of a musical note by learning how to synthesize sounds on a computer. Discusses ADSR (attack, decay, sustain, and release of a note) and includes a program (with listing) which students can use to examine ADSR on a Commodore 64 microcomputer. (JN)

  19. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  20. The Effectiveness of Note-Taking on Reading Comprehension of Iranian EFL Learners

    Directory of Open Access Journals (Sweden)

    Farnoush Bahrami

    2017-10-01

    Full Text Available By taking notes students could save time for reading all textbooks for their exams or for their representations. Taking notes increases attention of students to read or heard materials, and this increases their comprehension. Thus, the present study is important because note-taking could help them to remember what they learnt, absolutely important information. The method used in this research was survey. The 40 Persian EFL learners were selected from a language institute in Karaj to participate in the present study. These learners were divided into two groups; one of them is experimental group (N=20 and the other one is control group (N=20. Pretest and post test were two instruments that were used to carry out this study, a pretest about skill of note-taking of passages of the lessons was used for both experimental and control group. This test consisted of 4 passages. The same test was administrated again as the post test for both groups by the end of the course to see the different conclusion between taking note of experimental group and control group. Reliability between 4 texts is in oscillation from 0.6 to 0.81 (from 0.6 upwards. Therefore this reliability was an acceptable one. To analyze data descriptive statistics (that was contained percentage, frequency and mean score and also inferential statistics (that was contained ANOVA, Pearson correlation, independent sample t-test, multivariate’s test, regression were carried out by using SPSS16 soft ware. The findings confirmed that note taking is effective in reading comprehension.

  1. Relativistic description of atomic nuclei

    International Nuclear Information System (INIS)

    Krutov, V.A.

    1985-01-01

    Papers on the relativistic description of nuclei are reviewed. The Brown and Rho ''small'' bag'' model is accepted for hardrons. Meson exchange potentials of the nucleon-nucleon interaction have been considered. Then the transition from a system of two interacting nucleons has been performed to the relativistic nucleus description as a multinucleon system on the basis of OBEP (one-boson exchange potential). The proboem of OPEP (one-pion-exchange potential) inclusion to a relativistic scheme is discussed. Simplicity of calculations and attractiveness of the Walecka model for specific computations and calculations was noted. The relativistic model of nucleons interacting through ''effective'' scalar and vector boson fields was used in the Walacka model for describing neutronaand nuclear mater matters

  2. Training of audio descriptors: the cinematographic aesthetics as basis for the learning of the audio description aesthetics – materials, methods and products

    Directory of Open Access Journals (Sweden)

    Soraya Ferreira Alves

    2016-12-01

    Full Text Available Audio description (AD, a resource used to make theater, cinema, TV, and visual works of art accessible to people with visual impairments, is slowly being implemented in Brazil and demanding qualified professionals. Based on this statement, this article reports the results of a research developed during post-doctoral studies. The study is dedicated to the confrontation of film aesthetics with audio description techniques to check how the knowledge of the former can contribute to audiodescritor training. Through action research, a short film adapted from a Mario de Andrade’s, a Brazilian writer, short story called O Peru de Natal (Christmas Turkey was produced. The film as well as its audio description were carried out involving students and teachers from the discipline Intersemiotic Translation at the State University of Ceará. Thus, we intended to suggest pedagogical procedures generated by the students experiences by evaluating their choices and their implications.

  3. ASC Weekly News Notes

    Energy Technology Data Exchange (ETDEWEB)

    Womble, David E.

    2016-05-01

    Unified collision operator demonstrated for both radiation transport and PIC-DSMC. A side-by-side comparison between the DSMC method and the radiation transport method was conducted for photon attenuation in the atmosphere over 2 kilometers in physical distance with a reduction of photon density of six orders of magnitude. Both DSMC and traditional radiation transport agreed with theory to two digits. This indicates that PIC-DSMC operators can be unified with the radiation transport collision operators into a single code base and that physics kernels can remain unique to the actual collision pairs. This simulation example provides an initial validation of the unified collision theory approach that will later be implemented into EMPIRE.

  4. Multigrid methods for partial differential equations - a short introduction

    International Nuclear Information System (INIS)

    Linden, J.; Stueben, K.

    1993-01-01

    These notes summarize the multigrid methods and emphasis is laid on the algorithmic concepts of multigrid for solving linear and non-linear partial differential equations. In this paper there is brief description of the basic structure of multigrid methods. Detailed introduction is also contained with applications to VLSI process simulation. (A.B.)

  5. Notes from Folger

    Directory of Open Access Journals (Sweden)

    Stanley Fish

    2009-01-01

    Full Text Available The text written by Stanley Fish, which is an excerpt from his book Professional Correctness. Literary Studies and Political Change (Oxford 1995, is an attempt at a presentation and a discussion of the main conditioning factors and the aporia of interpretation. From among the four arguments given by the author, i.e. intention, historicalness, politicalness and interdisciplinarity, only the first one has been established to be an immanent feature of each of interpretations. This results from the conviction that while interpreting literary texts we are always subjected to the pressure of the surrounding premises. It is just the extensive and thorough analysis of these premises, to which the supporters of political, historical and interdisciplinary criticism refer to that makes the author of the sketch possible to show that behind each of the methods there are individual interests and a different vision of the world. To realize these determinants is to enable us to question the very need of universal interpretation. By questioning the theoretical fundamentals of the three mentioned modes of interpretation, the author admits frankly that the work of an interpreter can have both historical, political and just as well interdisciplinary character, though this observation is by all means tantamount to a recognition of the legitimacy of any of the criticized methods.

  6. Suicide Note Classification Using Natural Language Processing: A Content Analysis

    Directory of Open Access Journals (Sweden)

    John Pestian

    2010-08-01

    Full Text Available Suicide is the second leading cause of death among 25–34 year olds and the third leading cause of death among 15–25 year olds in the United States. In the Emergency Department, where suicidal patients often present, estimating the risk of repeated attempts is generally left to clinical judgment. This paper presents our second attempt to determine the role of computational algorithms in understanding a suicidal patient’s thoughts, as represented by suicide notes. We focus on developing methods of natural language processing that distinguish between genuine and elicited suicide notes. We hypothesize that machine learning algorithms can categorize suicide notes as well as mental health professionals and psychiatric physician trainees do. The data used are comprised of suicide notes from 33 suicide completers and matched to 33 elicited notes from healthy control group members. Eleven mental health professionals and 31 psychiatric trainees were asked to decide if a note was genuine or elicited. Their decisions were compared to nine different machine-learning algorithms. The results indicate that trainees accurately classified notes 49% of the time, mental health professionals accurately classified notes 63% of the time, and the best machine learning algorithm accurately classified the notes 78% of the time. This is an important step in developing an evidence-based predictor of repeated suicide attempts because it shows that natural language processing can aid in distinguishing between classes of suicidal notes.

  7. Suicide Note Classification Using Natural Language Processing: A Content Analysis.

    Science.gov (United States)

    Pestian, John; Nasrallah, Henry; Matykiewicz, Pawel; Bennett, Aurora; Leenaars, Antoon

    2010-08-04

    Suicide is the second leading cause of death among 25-34 year olds and the third leading cause of death among 15-25 year olds in the United States. In the Emergency Department, where suicidal patients often present, estimating the risk of repeated attempts is generally left to clinical judgment. This paper presents our second attempt to determine the role of computational algorithms in understanding a suicidal patient's thoughts, as represented by suicide notes. We focus on developing methods of natural language processing that distinguish between genuine and elicited suicide notes. We hypothesize that machine learning algorithms can categorize suicide notes as well as mental health professionals and psychiatric physician trainees do. The data used are comprised of suicide notes from 33 suicide completers and matched to 33 elicited notes from healthy control group members. Eleven mental health professionals and 31 psychiatric trainees were asked to decide if a note was genuine or elicited. Their decisions were compared to nine different machine-learning algorithms. The results indicate that trainees accurately classified notes 49% of the time, mental health professionals accurately classified notes 63% of the time, and the best machine learning algorithm accurately classified the notes 78% of the time. This is an important step in developing an evidence-based predictor of repeated suicide attempts because it shows that natural language processing can aid in distinguishing between classes of suicidal notes.

  8. Note on the ABC Conjecture

    OpenAIRE

    Carella, N. A.

    2006-01-01

    This note imparts heuristic arguments and theorectical evidences that contradict the abc conjecture over the rational numbers. In addition, the rudimentary datails for transforming this problem into the doimain of equidistribution theory are provided.

  9. Lecture notes on quantum statistics

    NARCIS (Netherlands)

    Gill, R.D.

    2000-01-01

    These notes are meant to form the material for an introductory course on quantum statistics at the graduate level aimed at mathematical statisticians and probabilists No background in physics quantum or otherwise is required They are still far from complete

  10. Alcune Note di Analisi Matematica

    OpenAIRE

    Vasselli, Ezio

    2011-01-01

    Lectures notes (in italian) of some arguments of classical analysis, with exercises. A particular emphasis to functional analysis and elementary operator algebra theory is given, by means of exercises and examples.

  11. European Science Notes. Volume 41, Number 7.

    Science.gov (United States)

    1987-07-01

    college preparatory that the social constructionist view, as group. (Chances are only slightly better he describes it, offers anything more for the...new method for the recognition and positioning of two-dimensionl objects. The method uses segmented descriptions of the object contours to generate...and recursively evaluate a number of selected hypotheses. This article dis- cusses the method in detail. International Symposium on Simulation of

  12. Digital Note-Taking: Discussion of Evidence and Best Practices.

    Science.gov (United States)

    Grahame, Jason A

    2016-03-01

    Balancing active course engagement and comprehension with producing quality lecture notes is challenging. Although evidence suggests that handwritten note-taking may improve comprehension and learning outcomes, many students still self-report a preference for digital note-taking and a belief that it is beneficial. Future research is warranted to determine the effects on performance of digitally writing notes. Independent of the methods or software chosen, best practices should be provided to students with information to help them consciously make an educated decision based on the evidence and their personal preference. Optimal note-taking requires self-discipline, focused attention, sufficient working memory, thoughtful rewording, and decreased distractions. Familiarity with the tools and mediums they choose will help students maximize working memory, produce better notes, and aid in their retention of material presented.

  13. SAFETY INSTRUCTION AND SAFETY NOTE

    CERN Multimedia

    TIS Secretariat

    2002-01-01

    Please note that the SAFETY INSTRUCTION N0 49 (IS 49) and the SAFETY NOTE N0 28 (NS 28) entitled respectively 'AVOIDING CHEMICAL POLLUTION OF WATER' and 'CERN EXHIBITIONS - FIRE PRECAUTIONS' are available on the web at the following urls: http://edms.cern.ch/document/335814 and http://edms.cern.ch/document/335861 Paper copies can also be obtained from the TIS Divisional Secretariat, email: TIS.Secretariat@cern.ch

  14. [Notes on euthanasia].

    Science.gov (United States)

    Goic, Alejandro

    2005-03-01

    In the Judeo-Christian tradition, human life is held to be sacred, a semblance of the divine and a gift from God which the individual cannot dispose of at his or her own will. Hence, these monotheistic religions have made of the crime of murder a transgression of God's own commandment not to kill and have extended the applicability of this commandment to the practice of euthanasia and suicide. On the other hand, some non-religious traditions offer plausible reasons favoring euthanasia. This is a delicate matter for physicians, since the Hippocratic tradition forbids euthanasia and because as care-givers they must also bear the psychological, moral and emotional burden of carrying it out. Physicians are trained to preserve life but not to bring it to an end. As human beings, they must always respect the principle of nonmaleficence, and as physicians they must always respect as well the principle of beneficence. It is difficult to accept the fact that ending a human life can be an act of beneficence. In order to differentiate between passive and active euthanasia, the concept of proportionality of medical acts must be brought into consideration. For instance, using high doses of opiates to alleviate pain or withholding the use of an extraordinary method of treatment are not passive acts aimed at ending the life of a terminally ill patient, but medical acts that are reasonable, judicious and proportionate to the condition and irreversibility of a patient's illness. Therefore, so-called passive euthanasia cannot be considered the same as euthanasia. On the other hand, medically assisted suicide is a deceitful form of active euthanasia. The aim of this act is to cause death and the physician is morally responsible for such a death, since he is providing the means for bringing a human life to an end. Many times the desire to die expressed by terminally ill elderly and helpless patients is a request for help and an expression of reproach against a society that allows for

  15. Implementation of 3D-virtual brachytherapy in the management of breast cancer: a description of a new method of interstitial brachytherapy

    International Nuclear Information System (INIS)

    Vicini, Frank A.; Jaffray, David A.; Horwitz, Eric M.; Edmundson, Gregory K.; DeBiose, David A.; Kini, Vijay R.; Martinez, Alvaro A.

    1998-01-01

    Purpose: We present the initial description of a new technique of interstitial breast brachytherapy in which a computer-generated image of an implant template is applied virtually to serial-computed tomography (CT) scan images of a patient's breast. Optimal placement of the virtual template around the CT images of the proposed target volume provides the physician with a preplan for improved positioning of implant needles around the actual target volume intraoperatively. Methods and Materials: Since March of 1993, 110 patients with early-stage breast cancer were entered onto a protocol of low or high dose rate brachytherapy as the sole radiation modality for part of their breast-conserving therapy. To improve the accuracy and reproducibility of target volume coverage in patients with a closed lumpectomy cavity, 11 of these implants were performed using the virtual brachytherapy technique. The virtual implant procedure was performed by first placing radiopaque skin markers on the breast surface for reference on the CT image and ultimately as intraoperative landmarks for the placement of implant needles. A CT scan of the breast was then performed and the target volume outlined on each CT scan slice by the physician. A virtual image of the brachytherapy template was then positioned around the CT image of the target volume to achieve an idealized implant with optimal coverage. The projected entrance and exit points of all needles on the skin of the breast (from the idealized virtual implant) were then identified (by perspective rendering of multiple 3D views) and hard-copy images taken to the operating room. The implant was then constructed by referencing the virtual implant images (needle entrance and exit points) to the radiopaque skin markers on the breast. After the implant was completed, a CT scan of the breast with the template catheters or needles in position was taken for comparison of the actual target volume coverage with the virtual implant generated

  16. Analysing playing using the note-time playing path.

    Science.gov (United States)

    de Graaff, Deborah L E; Schubert, Emery

    2011-03-01

    This article introduces a new method of data analysis that represents the playing of written music as a graph. The method, inspired by Miklaszewski, charts low-level note timings from a sound recording of a single-line instrument using high-precision audio-to-MIDI conversion software. Note onset times of pitch sequences are then plotted against the score-predicted timings to produce a Note-Time Playing Path (NTPP). The score-predicted onset time of each sequentially performed note (horizontal axis) unfolds in performed time down the page (vertical axis). NTPPs provide a visualisation that shows (1) tempo variations, (2) repetitive practice behaviours, (3) segmenting of material, (4) precise note time positions, and (5) time spent on playing or not playing. The NTPP can provide significant new insights into behaviour and cognition of music performance and may also be used to complement established traditional approaches such as think-alouds, interviews, and video coding.

  17. Note

    DEFF Research Database (Denmark)

    Kullman, Mikael; Campillo, Javier; Dahlquist, Erik

    2016-01-01

    Globally, more than 50% of all people are living in cities today. Enhancing sustainability and efficiency of urban energy systems is thus of high priority for global sustainable development. The European research project PLEEC (Planning for Energy Efficient Cities) focuses on technological...

  18. Description and Methods of the Automated Document Management System Usage in Scientific Organizational Activities of the Joint Institute for Nuclear Research (ADS SOA JINR)

    CERN Document Server

    Borisovsky, V F; Kekelidze, M G; Nikonov, E G; Senchenko, V A

    2005-01-01

    This paper presents the structure description and user guide for Information program system for automation of a document flow for support of scientific arrangement planning (ADS SOA) which can be used for planning and carrying out seminars, workshops, conferences and other arrangements of research management. This work is intended for automation of scientific research management in the Joint Institute for Nuclear Research. The complex of programs represents the CDS Agenda system used in the European Organization for Nuclear Research (CERN), which is adapted to the conditions of JINR.

  19. Gaz de France. Operation note

    International Nuclear Information System (INIS)

    2003-01-01

    This note was published for the public at the occasion of the admission to Euronext's Eurolist of the existing shares that make the capital of Gaz de France company, the French gas utility. The note gives some informations about Gaz de France activity, and about its strategy of development in the European gas market. Then it describes the offer relative to the opening of Gaz de France capital. Some selected financial data and some precision about the risk factors and the management of the company complete the document. (J.S.)

  20. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  1. Optimization for Guitar Fingering on Single Notes

    Science.gov (United States)

    Itoh, Masaru; Hayashida, Takumi

    This paper presents an optimization method for guitar fingering. The fingering is to determine a unique combination of string, fret and finger corresponding to the note. The method aims to generate the best fingering pattern for guitar robots rather than beginners. Furthermore, it can be applied to any musical score on single notes. A fingering action can be decomposed into three motions, that is, a motion of press string, release string and move fretting hand. The cost for moving the hand is estimated on the basis of Manhattan distance which is the sum of distances along fret and string directions. The objective is to minimize the total fingering costs, subject to fret, string and finger constraints. As a sequence of notes on the score forms a line on time series, the optimization for guitar fingering can be resolved into a multistage decision problem. Dynamic programming is exceedingly effective to solve such a problem. A level concept is introduced into rendering states so as to make multiple DP solutions lead a unique one among the DP backward processes. For example, if two fingerings have the same value of cost at different states on a stage, then the low position would be taken precedence over the high position, and the index finger would be over the middle finger.

  2. Churchill on Stalin: A note.

    NARCIS (Netherlands)

    Ellman, M.J.

    2006-01-01

    The purpose of this note is to draw attention to two limitations of Churchill's war memoirs as a source of accurate information about Stalin, his views ans actions. they concern, first Stalin's alleged remarks in 1942 about collectivisation, and second Stalin's allleged response to Churchill's

  3. Lecture notes on ideal magnetohydrodynamics

    International Nuclear Information System (INIS)

    Goedbloed, J.P.

    1983-03-01

    Notes, prepared for a course of lectures held at the Instituto de Fisica, Universidade Estadual de Campinas, Brazil (June-August 1978). An extensive theoretical treatment of the behaviour of hot plasmas caught in equations and mathematical models is presented in 12 chapters

  4. Developing INDCs: a guidance note

    DEFF Research Database (Denmark)

    Bakkegaard, Riyong Kim; Bee, Skylar; Naswa, Prakriti

    needs and low capability, would need means of implementation (MoI) for adaptation and to take ambitious mitigation actions. Developing countries would include MoI needs in the context of mitigation and adaptation. The note explains briefly how countries can identify their unconditional contributions....

  5. A note on hypoplastic yielding

    OpenAIRE

    Nader, José Jorge

    2010-01-01

    This note discusses briefly the definition of yield surface in hypoplasticity in connection with the physical notion of yielding. The relation of yielding with the vanishing of the material time derivative of the stress tensor and the vanishing of the corotational stress rate is investigated.

  6. Database Description - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ... QTL list, Plant DB link & Genome analysis methods Alternative name - DOI 10.18908/lsdba.nbdc01194-01-000 Cr...ers and QTLs are curated manually from the published literature. The marker information includes marker sequences, genotyping methods... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  7. The quality of operative notes at a general surgery unit.

    Science.gov (United States)

    Rogers, A; Bunting, M; Atherstone, A

    2008-09-01

    With the increasingly litigious nature of medical practice, accurate documentation is critical. This is particularly true for operative procedures, and medical councils have identified this and published guidelines to aid surgeons. However, these remain a frequently cited weakness in their defence in medico-legal cases. This study assessed the accuracy of operative notes in a general surgery unit in order to improve our practice. An audit of 100 consecutive operative notes was performed, and notes were assessed using the Royal College of Surgeons guidelines. The quality of note-taking of trainees was compared with that of consultant surgeons. A series of operation note pro formas was designed in response to the findings. Of the notes, 66% were completed by trainees. The vast majority of notes had no diagram to demonstrate the surgical findings or illustrate the actions. Specialist surgeons were more likely to describe the actions accurately, but less likely to describe wound closure methods or dressings used. They were also less likely to complete adequate postoperative orders. This study identifies key areas of weakness in our operative note-keeping. Pro formas should be introduced and made available for commonly performed procedures, and diagrams should be used wherever possible.

  8. Microscopic description of nuclear reactions

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1992-01-01

    The genealogical series method has been extended to the continuous spectrum of the many-body systems. New nonlinear integral equations have been formulated to perform the microscopical description of the nuclear reactions with arbitrary number of particles. The way to solve them numerically is demonstrated

  9. Improving Published Descriptions of Germplasm.

    Science.gov (United States)

    Published descriptions of new germplasm, such as in the Journal of Plant Registrations (JPR) and, prior to mid-2007, in Crop Science, are important vehicles for allowing researchers and other interested parties to learn about such germplasm and the methods used to generate them. Launched in 2007, JP...

  10. Notes on instrumentation and control

    CERN Document Server

    Roy, G J

    2013-01-01

    Notes on Instrumentation and Control presents topics on pressure (i.e., U-tube manometers and elastic type gauges), temperature (i.e. glass thermometer, bi-metallic strip thermometer, filled system thermometer, vapor pressure thermometer), level, and flow measuring devices. The book describes other miscellaneous instruments, signal transmitting devices, supply and control systems, and monitoring systems. The theory of automatic control and semi-conductor devices are also considered. Marine engineers will find the book useful.

  11. Notes on modeling and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    These notes present a high-level overview of how modeling and simulation are carried out by practitioners. The discussion is of a general nature; no specific techniques are examined but the activities associated with all modeling and simulation approaches are briefly addressed. There is also a discussion of validation and verification and, at the end, a section on why modeling and simulation are useful.

  12. Post-mortem radiography of the lungs: Experiments to compare various methods of examination and descriptions of their usefulness in actual practice

    International Nuclear Information System (INIS)

    Pankow, W.

    1986-01-01

    Described is the post-mortem examination of the isolated lung using radiologic-morphologic and histologic methods. Comparisons are made ragarding practical value of the conservation techniques chosen, which were the method of Markaria and Heitzmann that is based on fixing in alcohol and air drying and the nitrogen freezing method developed by Rau and colleagues. Both methods ensure adequate visualition of the pulmonary ultrastructure by X-rays, even though this observation should be qualified by the fact that pulmonary tissue fixed in alcohol tends to shrink and that intraalveolar edema are thus artificially reduced. Either of the methods under investigation permits angiographic and bronchographic examinations to be carried out without difficulty. In macroscopic evaluations better results are obtained for lungs fixed in alcohol. Freeze-dried samples offer advantages in the histological assessment of the pulmonary ultrastructure. Post-mortem radiography of the lungs is particularly valuable in the analysis of pathological changes in the pulmonary structure. (MBC) [de

  13. A description of the reactor inventory module NECTAR-RICE

    International Nuclear Information System (INIS)

    Nair, S.

    1984-06-01

    This note describes the NECTAR-RICE module of the CEGB's NECTAR environmental code, which can be used to calculate the actinide and/or fission product inventories of irradiated nuclear fuel used as input to the calculation of the release source term to atmosphere for accidental releases. The range of actinide and fission product nuclides considered is large enough to permit studies to be made for virtually any irradiation history consisting of ad hoc combinations of irradiation and cooling periods. The actinide and fission product inventories are calculated for burnup periods using numerical methods best suited to this problem, while analytical solutions are used for cooling periods. The code can be used to perform a coupled actinide-fission product calculation, a solely actinide calculation or a solely fission product calculation. Output consists of inventories, activities, and γ spectra, among others. A brief description is also given of previous work in this field. (author)

  14. Fotonovela. Technical Note No. 13.

    Science.gov (United States)

    Barriga, Patricio; Villacis, Rodrigo

    This report contains a description of a program that sought to develop the fotonovela as an instrument for increasing literacy and consciousness awareness in Ecuador. Following a general introduction to the work of the Nonformal Education Project, the creator of this program, the report presents information about the antecedents and…

  15. A Guide to Field Notes for Qualitative Research: Context and Conversation.

    Science.gov (United States)

    Phillippi, Julia; Lauderdale, Jana

    2018-02-01

    Field notes are widely recommended in qualitative research as a means of documenting needed contextual information. With growing use of data sharing, secondary analysis, and metasynthesis, field notes ensure rich context persists beyond the original research team. However, while widely regarded as essential, there is not a guide to field note collection within the literature to guide researchers. Using the qualitative literature and previous research experience, we provide a concise guide to collection, incorporation, and dissemination of field notes. We provide a description of field note content for contextualization of an entire study as well as individual interviews and focus groups. In addition, we provide two "sketch note" guides, one for study context and one for individual interviews or focus groups for use in the field. Our guides are congruent with many qualitative and mixed methodologies and ensure contextual information is collected, stored, and disseminated as an essential component of ethical, rigorous qualitative research.

  16. „Hustý popis“ jako literárněvědná metoda? // "Thick description" as a method of literary theory?

    Directory of Open Access Journals (Sweden)

    Jitka Paitlová

    2016-11-01

    Full Text Available This paper deals with a selected example of the understanding of the Anglo-Saxon New Historicism by German literary scholars. It focuses on the method of “thick description” as formulated by the American anthropologist Clifford Geertz and as criticized by German literary scholar and ethnologist Thomas Fechner-Smarsly. In connection with the so-called anthropological turn, it consists in the application of ethnology in literary criticism. According to Geertz a semantic density arises from the complexity of described, but Geertz fails to formulate a general theory. Fechner sees a great potential for literary studies in the method of “thick description”, but he criticizes the lack of system in Geertz’, when he is reluctant to formulate a generally applicable model of this method. Fechner therefore calls for contextualization, organization and instantiation methods of “thick description” in literary studies and, moreover, emphasizes the interdisciplinary overlap.

  17. Description of a stable scheme for steady-state coupled Monte Carlo–thermal–hydraulic calculations

    International Nuclear Information System (INIS)

    Dufek, Jan; Eduard Hoogenboom, J.

    2014-01-01

    Highlights: • A stable coupling scheme for steady-state MC–TH calculations is described. • The coupling scheme is based on the stochastic approximation method. • The neutron flux (or power) distribution is relaxed using a variable step-size. - Abstract: We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note

  18. Descrição do girino de Lysapsus laevis (Parker, com notas sobre o ambiente, hábitos e desenvolvimento (Anura, Hylidae, Pseudinae Description of the tadpole of Lysapsus laevis (Parker, with notes on the habitat, habits, and development (Anura, Hylidae, Pseudinae

    Directory of Open Access Journals (Sweden)

    Ulisses Caramaschi

    2004-09-01

    Full Text Available O girino de Lysapsus laevis (Parker, 1935 é descrito e figurado, com base em exemplares coletados na Vila Surumu, Estado de Roraima, Brasil. No estágio 37, o girino possui 61,4 mm de comprimento total; corpo triangular em vista lateral, ovóide em vistas dorsal e ventral, correspondendo a 28% do comprimento total; olhos laterais, parcialmente visíveis em vistas dorsal e ventral; disco oral ânteroventral, pequeno; fórmula dentária, 2(2/3(1; espiráculo curto, sinistro; tubo anal longo, largo, direito, mediano; em vida, dorso do corpo verde, ventre branco iridescente; musculatura caudal e nadadeiras verdes; terço anterior da nadadeira caudal e tubo anal com manchas irregulares iridescentes; metade distal da cauda cinza a cinza escuro; íris bronze. Notas sobre o ambiente, hábitos e desenvolvimento são apresentadas.The tadpole of Lysapsus laevis (Parker, 1935 is described and figured, based on specimens from Vila Surumu, State of Roraima, northern Brazil. In stage 37, the tadpole attains 61.4 mm in total length; body triangular in lateral view, ovoid in dorsal and ventral views, corresponding to 28% of the total length; eyes lateral, partially visible in dorsal and ventral views; oral disc anteroventral, small; labial tooth row formula, 2(2/3(1; spiracle short, sinistral; anal tube large, wide, medium; in life, dorsum of body green, venter iridescent white; caudal musculature and fins green; anterior third of caudal fin and anal tube with irregular iridescent stains; distal half of tail gray to dark gray; iris bronze. Notes on the habitat, habits, and development are provided.

  19. Revising Lecture Notes: How Revision, Pauses, and Partners Affect Note Taking and Achievement

    Science.gov (United States)

    Luo, Linlin; Kiewra, Kenneth A.; Samuelson, Lydia

    2016-01-01

    Note taking has been categorized as a two-stage process: the recording of notes and the review of notes. We contend that note taking might best involve a three-stage process where the missing stage is revision. This study investigated the benefits of revising lecture notes and addressed two questions: First, is revision more effective than…

  20. Factors Influencing the Effectiveness of Note Taking on Computer-Based Graphic Organizers

    Science.gov (United States)

    Crooks, Steven M.; White, David R.; Barnard, Lucy

    2007-01-01

    Previous research on graphic organizer (GO) note taking has shown that this method is most effective when the GO is presented to the student partially complete with provided notes. This study extended prior research by investigating the effects of provided note type (summary vs. verbatim) and GO bite size (large vs. small) on the transfer…

  1. Strategic Note-Taking for Middle-School Students with Learning Disabilities in Science Classes

    Science.gov (United States)

    Boyle, Joseph R.

    2010-01-01

    While today's teachers use a variety of teaching methods in middle-school science classes, lectures and note-taking still comprise a major portion of students' class time. To be successful in these classes, middle-school students need effective listening and note-taking skills. Students with learning disabilities (LD) are poor note-takers, which…

  2. mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

    Science.gov (United States)

    van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Wu, Qiong; Chen, Li; Majeed, Azeem; Rudan, Igor; Zhang, Yanfeng; Car, Josip

    2013-01-01

    Background We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies. Field site The field site for this mHealth project was Zhao County, which lies 280 km south of Beijing in Hebei Province, China. Methods We described the methodology of two studies: (i) a mixed methods study exploring factors influencing sample size calculations for mHealth–based health surveys and (ii) a cross–over study determining validity of an mHealth text messaging data collection tool. The first study used mixed methods, both quantitative and qualitative, including: (i) two surveys with caregivers of young children, (ii) interviews with caregivers, village doctors and participants of the cross–over study, and (iii) researchers’ views. We combined data from caregivers, village doctors and researchers to provide an in–depth understanding of factors influencing sample size calculations for mHealth–based health surveys. The second study, a cross–over study, used a randomised cross–over study design to compare the traditional face–to–face survey method to the new text messaging survey method. We assessed data equivalence (intrarater agreement), the amount of information in responses, reasons for giving different responses, the response rate, characteristics of non–responders, and the error rate. Conclusions This paper described the objectives, field site and methods of a large mHealth project part of a collaboration between researchers in China and the UK. The mixed methods study evaluating factors that influence sample size calculations could help future studies with estimating reliable sample sizes. The cross–over study comparing face–to–face and text message survey data collection

  3. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  4. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  5. Lecture notes for criticality safety

    International Nuclear Information System (INIS)

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented

  6. Notes on elementary particle physics

    CERN Document Server

    Muirhead, William Hugh

    1972-01-01

    Notes of Elementary Particle Physics is a seven-chapter text that conveys the ideas on the state of elementary particle physics. This book emerged from an introductory course of 30 lectures on the subject given to first-year graduate students at the University of Liverpool. The opening chapter deals with pertinent terminologies in elementary particle physics. The succeeding three chapters cover the concepts of transition amplitudes, probabilities, relativistic wave equations and fields, and the interaction amplitude. The discussion then shifts to tests of electromagnetic interactions, particul

  7. Description of recovery method used for curdlan produced by Agrobacterium sp. IFO 13140 and its relation to the morphology and physicochemical and technological properties of the polysaccharide.

    Science.gov (United States)

    Mangolim, Camila Sampaio; Silva, Thamara Thaiane da; Fenelon, Vanderson Carvalho; Koga, Luciana Numata; Ferreira, Sabrina Barbosa de Souza; Bruschi, Marcos Luciano; Matioli, Graciette

    2017-01-01

    Curdlan is a linear polysaccharide considered a dietary fiber and with gelation properties. This study evaluated the structure, morphology and the physicochemical and technological properties of curdlan produced by Agrobacterium sp. IFO 13140 recovered by pre-gelation and precipitation methods. Commercial curdlan submitted or otherwise to the pre-gelation process was also evaluated. The data obtained from structural analysis revealed a similarity between the curdlan produced by Agrobacterium sp. IFO 13140 (recovered by both methods) and the commercial curdlans. The results showed that the curdlans evaluated differed significantly in terms of dispersibility and gelation, and only the pre-gelled ones had significant potential for food application, because this method influence on the size of the particles and in the presence of NaCl. In terms of technological properties, the curdlan produced by Agrobacterium sp. IFO 13140 (pre-gelation method) had a greater water and oil holding capacity (64% and 98% greater, respectively) and a greater thickening capacity than the pre-gelled commercial curdlan. The pre-gelled commercial curdlan displayed a greater gelling capacity at 95°C than the others. When applied to food, only the pre-gelled curdlans improved the texture parameters of yogurts and reduced syneresis. The curdlan gels, which are rigid and stable in structure, demonstrated potential for improving the texture of food products, with potential industrial use.

  8. [Comparative description and retrospective analisis of modern methods of surgical wounds closure for intraoperative prophylaxis of development of pathologic cutaneous cicatrices].

    Science.gov (United States)

    Stavyts'kyĭ, S O; Avetikov, D S; Lokes, K P; Rozkolupa, O O; Boĭko, I V

    2014-05-01

    The experience of application of various methods of closure was presented for the head and neck cutaneous wound surfaces after elective operative interventions. The variant of the postoperative results estimation and optimization of the wounds healing by primary closure was proposed.

  9. Accuracy of Several Wave Function and Density Functional Theory Methods for Description of Noncovalent Interaction of Saturated and Unsaturated Hydrocarbon Dimers

    Czech Academy of Sciences Publication Activity Database

    Granatier, Jaroslav; Pitoňák, M.; Hobza, Pavel

    2012-01-01

    Roč. 8, č. 7 (2012), s. 2282-2292 ISSN 1549-9618 Grant - others:APVV(SK) APVV-0059-10 Institutional research plan: CEZ:AV0Z40550506 Keywords : intermolecular interaction energies * Plesset perturbation-theory * molecular-orbital methods * protein rubredoxin Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 5.389, year: 2012

  10. A comparison between the adiabatic time dependent Hartree-Fock and the generator coordinate methods for the description of nuclear collective motion

    International Nuclear Information System (INIS)

    Villars, F.

    1975-01-01

    The objective of the work is to draw attention to the essential equivalence of the two apparently quite distinct ways of describing nuclear collective dyanmics, the adiabatic time-dependent Hartree-Fock method (ADTHF) on the one hand, and the Generator Coordinate (GC) method on the other hand. To demonstrate this relation, an analysis of the simplest case, in which collective motion is described by a single collective para- meter q(t) is presented. In the ATDHF approach, two self-consistency conditions are obtained; the resultant expressions for the collective potential and kinetic energies represent a special case of the more general results of Baranger and Veneroni. In the G.C. approach to the same system (with the same collective parameter q), the narrow overlap approximation must be made, as the counterpart of the adiabatic approximation in the TDHF method. In its conventional form, the G.C. method leads to a different expression for the collective kinetic energy. It is shown however, that a simple generalization of the G.C.-wave function leads to corrections determined by a variational principle. In leading order, the corrected expression for the collective kinetic energy is identical with the TDHF result In both cases, the collective inertia is determined by a self-consistent cranking formula

  11. Methods and Tools to allow molecular flow simulations to be coupled to higher level continuum descriptions of flows in porous/fractured media and aerosol/dust dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Loyalka, Sudarshan [Univ. of Missouri, Columbia, MO (United States)

    2015-04-09

    The purpose of this project was to develop methods and tools that will aid in safety evaluation of nuclear fuels and licensing of nuclear reactors relating to accidents.The objectives were to develop more detailed and faster computations of fission product transport and aerosol evolution as they generally relate to nuclear fuel and/or nuclear reactor accidents. The two tasks in the project related to molecular transport in nuclear fuel and aerosol transport in reactor vessel and containment. For both the tasks, explorations of coupling of Direct Simulation Monte Carlo with Navier-Stokes solvers or the Sectional method were not successful. However, Mesh free methods for the Direct Simulation Monte Carlo method were successfully explored.These explorations permit applications to porous and fractured media, and arbitrary geometries.The computations were carried out in Mathematica and are fully parallelized. The project has resulted in new computational tools (algorithms and programs) that will improve the fidelity of computations to actual physics, chemistry and transport of fission products in the nuclear fuel and aerosol in reactor primary and secondary containments.

  12. LIFTING THE DUSTY VEIL WITH NEAR- AND MID-INFRARED PHOTOMETRY. I. DESCRIPTION AND APPLICATIONS OF THE RAYLEIGH-JEANS COLOR EXCESS METHOD

    International Nuclear Information System (INIS)

    Majewski, Steven R.; Zasowski, Gail; Nidever, David L.

    2011-01-01

    The Milky Way (MW) remains a primary laboratory for understanding the structure and evolution of spiral galaxies, but typically we are denied clear views of MW stellar populations at low Galactic latitudes because of extinction by interstellar dust. However, the combination of Two Micron All-Sky Survey (2MASS) near-infrared (NIR) and Spitzer-IRAC mid-infrared (MIR) photometry enables a powerful method for determining the line-of-sight reddening to any star: the sampled wavelengths lie in the Rayleigh-Jeans part of the spectral energy distribution of most stars, where, to first order, all stars have essentially the same intrinsic color. Thus, changes in stellar NIR-MIR colors due to interstellar reddening are readily apparent, and (under an assumed extinction law) the observed colors and magnitudes of stars can be easily and accurately restored to their intrinsic values, greatly increasing their usefulness for Galactic structure studies. In this paper, we explore this 'Rayleigh-Jeans Color Excess' (RJCE) method and demonstrate that use of even a simple variant of the RJCE method based on a single reference color, (H -[4.5μ]), can rather accurately remove dust effects from previously uninterpretable 2MASS color-magnitude diagrams of stars in fields along the heavily reddened Galactic midplane, with results far superior to those derived from application of other dereddening methods. We also show that 'total' Galactic midplane extinction looks rather different from that predicted using 100μ emission maps from the IRAS/ISSA and COBE/DIRBE instruments as presented by Schlegel et al. Instead, the Galactic midplane extinction strongly resembles the distribution of 13 CO (J = 1→0) emission. Future papers will focus on refining the RJCE method and applying the technique to understand better not only dust and its distribution but also the distribution of stars intermixed with the dust in the low-latitude Galaxy.

  13. Absolute determination of thyroid activity from profile scans. Description of a correction method for extra-thyroidal activity of the neck. , pt. 2

    International Nuclear Information System (INIS)

    Damme, K.J. van

    1977-01-01

    An absolute method to measure the uptake of radioactive iodide by the thyroid by making a profile scan across the thyroid region with a slit-collimated detector is described. It is well known that the extra-thyroidal activity (ETA) in the neck may constitute a severe hindrance to measure the uptake accurately, especially in cases of hypothyroidism and often during the first few hours after the administration of the traces dose (e.g. orally 0.5 μCiNa 131 I). The author's approach to the problem is presented. A practical application of the method is discussed in extenso. A comparative evaluation of the usability of 123 I and 131 I as least-burdening radionuclides for child patients is given at the end

  14. mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

    Directory of Open Access Journals (Sweden)

    Michelle Helena van Velthoven

    2013-12-01

    Full Text Available We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies.

  15. Dual gated PET/CT imaging of small targets of the heart: method description and testing with a dynamic heart phantom.

    Science.gov (United States)

    Kokki, Tommi; Sipilä, Hannu T; Teräs, Mika; Noponen, Tommi; Durand-Schaefer, Nicolas; Klén, Riku; Knuuti, Juhani

    2010-01-01

    In PET imaging respiratory and cardiac contraction motions interfere the imaging of heart. The aim was to develop and evaluate dual gating method for improving the detection of small targets of the heart. The method utilizes two independent triggers which are sent periodically into list mode data based on respiratory and ECG cycles. An algorithm for generating dual gated segments from list mode data was developed. The test measurements showed that rotational and axial movements of point source can be separated spatially to different segments with well-defined borders. The effect of dual gating on detection of small moving targets was tested with a moving heart phantom. Dual gated images showed 51% elimination (3.6 mm out of 7.0 mm) of contraction motion of hot spot (diameter 3 mm) and 70% elimination (14 mm out of 20 mm) of respiratory motion. Averaged activity value of hot spot increases by 89% when comparing to non-gated images. Patient study of suspected cardiac sarcoidosis shows sharper spatial myocardial uptake profile and improved detection of small myocardial structures such as papillary muscles. The dual gating method improves detection of small moving targets in a phantom and it is feasible in clinical situations.

  16. Can digital stories go where palliative care research has never gone before? A descriptive qualitative study exploring the application of an emerging public health research method in an indigenous palliative care context.

    Science.gov (United States)

    Williams, Lisa; Gott, Merryn; Moeke-Maxwell, Tess; Black, Stella; Kothari, Shuchi; Pearson, Sarina; Morgan, Tessa; Wharemate, Matua Rawiri; Hansen, Whaea Whio

    2017-09-04

    The World Health Organization (WHO) has called for global approaches to palliative care development. Yet it is questionable whether one-size-fits-all solutions can accommodate international disparities in palliative care need. More flexible research methods are called for in order to understand diverse priorities at local levels. This is especially imperative for Indigenous populations and other groups underrepresented in the palliative care evidence-base. Digital storytelling (DST) offers the potential to be one such method. Digital stories are short first-person videos that tell a story of great significance to the creator. The method has already found a place within public health research and has been described as a useful, emergent method for community-based participatory research. The aim of this study was to explore Māori participants' views on DST's usefulness, from an Indigenous perspective, as a research method within the discipline of palliative care. The digital storytelling method was adapted to include Māori cultural protocols. Data capturing participant experience of the study were collected using participant observation and anonymous questionnaires. Eight participants, seven women and one man, took part. Field notes and questionnaire data were analysed using critical thematic analysis. Two main themes were identified during analyses: 1) issues that facilitated digital storytelling's usefulness as a research method for Māori reporting on end of life caregiving; and 2) issues that hindered this process. All subthemes identified: recruitment, the pōwhiri process, (Māori formal welcome of visitors) and technology, related to both main themes and are presented in this way. Digital storytelling is an emerging method useful for exploring Indigenous palliative care issues. In line with a Health Promoting Palliative Care approach that centres research in communities, it helps meet the need for diverse approaches to involve underrepresented groups.

  17. Quantitative measurement of post-irradiation neck fibrosis based on the young modulus: description of a new method and clinical results.

    Science.gov (United States)

    Leung, Sing-Fai; Zheng, Yongping; Choi, Charles Y K; Mak, Suzanne S S; Chiu, Samuel K W; Zee, Benny; Mak, Arthur F T

    2002-08-01

    Postirradiation fibrosis is one of the most common late effects of radiation therapy for patients with head and neck carcinoma. An objective and quantitative method for its measurement is much desired, but the criteria currently used to score fibrosis are mostly semiquantitative and partially subjective. The Young Modulus (YM) is a physical parameter that characterizes the deformability of material to stress. The authors measured the YM in soft tissues of the neck, at defined reference points, using an ultrasound probe and computer algorithm that quantified the indentation (deformation) on tissue due to a measured, applied force. One hundred five patients who had received previous radiation therapy to the entire neck were assessed, and the results were compared with the hand palpation scores and with a functional parameter represented by the range of neck rotation, and all results were correlated with symptoms. The YM was obtained successfully in all patients examined. It had a significant positive correlation with the palpation score and a significant negative correlation with the range of neck rotation. The YM was significantly higher on the side of the neck that received a boost dose of radiation, although the corresponding palpation scores were similar. The results of all three measurement methods were correlated with symptoms. Postirradiation neck fibrosis can be measured in absolute units based on the YM. The results showed a significant correlation with hand palpation scores, with restriction of neck rotation, and with symptoms. Compared with the palpation method, the YM is more quantitative, objective, focused on small subregions, and better discriminates regions subject to differential radiation dose levels. Its inclusion in the Analytic category of the Late Effects of Normal Tissues-SOMA system should be considered to facilitate comparative studies. Copyright 2002 American Cancer Society.

  18. Novel hybrid cryo‐radial method: an emerging alternative to CT‐guided biopsy in suspected lung cancer. A prospective case series and description of technique

    Science.gov (United States)

    Yap, Elaine

    2017-01-01

    In diagnosing peripheral pulmonary lesions (PPL), radial endobronchial ultrasound (R‐EBUS) is emerging as a safer method in comparison to CT‐guided biopsy. Despite the better safety profile, the yield of R‐EBUS remains lower (73%) than CT‐guided biopsy (90%) due to the smaller size of samples. We adopted a hybrid method by adding cryobiopsy via the R‐EBUS Guide Sheath (GS) to produce larger, non‐crushed samples to improve diagnostic capability and enhance molecular testing. We report six prospective patients who underwent this procedure in our institution. R‐EBUS samples were obtained via conventional sampling methods (needle aspiration, forceps biopsy, and cytology brush), followed by a cryobiopsy. An endobronchial blocker was placed near the planned area of biopsy in advance and inflated post‐biopsy to minimize the risk of bleeding in all patients. A chest X‐ray was performed 1 h post‐procedure. All the PPLs were visualized with R‐EBUS. The mean diameter of cryobiopsy samples was twice the size of forceps biopsy samples. In four patients, cryobiopsy samples were superior in size and the number of malignant cells per high power filed and was the preferred sample selected for mutation analysis and molecular testing. There was no pneumothorax or significant bleeding to report. Cryobiopsy samples were consistently larger and were the preferred samples for molecular testing, with an increase in the diagnostic yield and reduction in the need for repeat procedures, without hindering the marked safety profile of R‐EBUS. Using an endobronchial blocker improves the safety of this procedure. PMID:29321931

  19. Debriefing Note Secondary Education Support Programme

    DEFF Research Database (Denmark)

    Webster, Neil; Vagnby, Bo Hellisen; Thomsen, Thomas J.

    Debriefing note regarding joint programming for the Secondary Education Support Programme (2003- 2007). The note specifies preparation of SIP Physical Guidelines; Training needs assessment for Physical School Status and Rapid Technical Assessments; SIP/DEP preparation; Selection criteria...

  20. Taking notes as an interactive process

    OpenAIRE

    Hornig, Wolfgang

    1984-01-01

    Taking notes as an interactive process : how to improve students´ notes / Hornig W. ; Nowak, J. - In: Nowak, Johann: Textverstehen und Textrekonstruktion in Vorlesungen. - Augsburg : HDZ, 1984. - S. 227-253. - (Augsburger Studien zur Hochschuldidaktik ; 12)

  1. Analytical Criticalities Associated to Different Immunological Methods for Serum Free Light Chain Detection in Plasma Cell Dyscrasias: A Description of Particular Clinical Cases

    Directory of Open Access Journals (Sweden)

    Rocco Sabatino

    2017-04-01

    Full Text Available Current criteria for differential diagnosis of multiple myeloma (MM, Monoclonal gammopathy of undetermined significance (MGUS, and smoldering multiple myeloma (SMM are included in the 2003 guidelines by the International Myeloma Working Group (IMWG. An updated version was then published in 2014, highlighting the importance of serum free light chain (sFLC detection, as well as the κ/λ ratio as excellent indicators of clonality. At present, two commercial assays for sFLC quantification are available: the Freelite™ assay and the N-Latex assay. The first was developed by The Binding Site based on a mixture of polyclonal antibodies directed against a variety of FLC epitopes. It may be run on a wide range of nephelometers, as well as on turbidimeters. The second method was developed by Siemens and runs exclusively on Siemens instruments. It employs a probe mixture of mouse monoclonal antibodies. The aim of our study was to evaluate sFLC measurement and calculated κ/λ ratio in 85 patients with monoclonal gammopathies (MGs in order to compare methods. We demonstrated that there is only a moderate concordance between the two FLC assays. In particular, in one case, we observed no qualitative alterations of the serum protein pattern, and in the absence of a Freelite™ assay, sFLC measurement would not have been possible to highlight the increase of λ FLC.

  2. The simplest "field" methods for extractin of nematodes from plants, wood, insects and soil, with additional description how to keep extracted nematodes alive for a long time.

    Science.gov (United States)

    Ryss, A Yu

    2017-01-01

    The simplest modification of the dynamic extraction method using cottonwool filter based on the Baermann funnel principle, is described. This modification excludes the funnel because a great share of Sticky worms attach to sloping walls of a funnel and thus do not reach the collector Eppendorf tube. But the main principle of the Baermann funnel is used, I. e. sinking down of actively moving heavy narrow bodies via wide holes of filter and thus separating the active worms from passive non-Brownian moving substrate particles, which do not pass the filter and remain above it. This principle is illustrated because it has never been described before. In the proposed modification any sloping walls in the extraction paths are excluded and thus the probability to attach sticky nemotodes to walls is also excluded; only cylindrical equipment with abrupt vertical walls is used; procedures are extremely simplified to be user-friendly for beginners: only filter (cotton pads), Eppendorf tubes, plastic glasses and narrow PVC tubing are applied. The new simplified modification allows one to collect nematodes by non-professional workers, e. g. in Polar expeditions without microscopic study of results. As an addition, an efficient method to maintain extracted nematodes alive is proposed, using the "effect of water film" in foam rubber inside the Eppendorf tube. To maintain nematodes alive during several months it is recommended to suppress bacteria via addition of 0.2-0.4% formaldehyde solution and then keep the tube with nematodes in a refrigerator.

  3. The new bank note distribution system

    OpenAIRE

    Gerrit Bilkes

    1997-01-01

    In this article, the author outlines the recent changes made to the way Canada's bank notes are distributed. The new system allows financial institutions to exchange notes directly with one another at designated points across the country, rather than through Bank of Canada agencies, as was previously the case. The institutions communicate with the Bank of Canada through a computerized inventory-management system. Two Bank of Canada operations centres monitor note quality and supply new notes ...

  4. What Predicts Skill in Lecture Note Taking?

    Science.gov (United States)

    Peverly, Stephen T.; Ramaswamy, Vivek; Brown, Cindy; Sumowski, James; Alidoost, Moona; Garner, Joanna

    2007-01-01

    Despite the importance of good lecture notes to test performance, very little is known about the cognitive processes that underlie effective lecture note taking. The primary purpose of the 2 studies reported (a pilot study and Study 1) was to investigate 3 processes hypothesized to be significantly related to quality of notes: transcription…

  5. Production of the charmonium states in the direct channel of pantip annihilation and description of a new experimental method. Exclusive reactions pantip#-> #e+e-

    International Nuclear Information System (INIS)

    Brom, J.M.

    1985-06-01

    The experiment R704 at the CERN Intersecting Storages Rings (ISR) utilised a completely new technique for charmonium spectroscopy, using a cooled antiprotons beam in collision with protons of a dense, molecular H 2 ''jet target''. ISR operations, jet target and experimental apparatus are described. Observation of the reaction pantip#-> #J/Ψ#-> #e + e - (193 evts for an integrated luminosity of 141 nb -1 ) and estimation of the J/Ψ mass using the beam parameters (3096.95±0.1±0.27 MeV) are used to test the method, the energy calibration and the reproductibility of the ISR. From these results, a very good precision of ± 300 KeV is expected in the later results on J PC ≠ 1 -- states. In addition, we give new upper limits for the magnetic form factor of the proton at high transfer [fr

  6. Implementation and extension of the impulse transfer function method for future application to the space shuttle project. Volume 2: Program description and user's guide

    Science.gov (United States)

    Patterson, G.

    1973-01-01

    The data processing procedures and the computer programs were developed to predict structural responses using the Impulse Transfer Function (ITF) method. There are three major steps in the process: (1) analog-to-digital (A-D) conversion of the test data to produce Phase I digital tapes (2) processing of the Phase I digital tapes to extract ITF's and storing them in a permanent data bank, and (3) predicting structural responses to a set of applied loads. The analog to digital conversion is performed by a standard package which will be described later in terms of the contents of the resulting Phase I digital tape. Two separate computer programs have been developed to perform the digital processing.

  7. Description of analytical method and clinical utility of measuring serum 7-alpha-hydroxy-4-cholesten-3-one (7aC4) by mass spectrometry.

    Science.gov (United States)

    Donato, Leslie J; Lueke, Alan; Kenyon, Stacy M; Meeusen, Jeffrey W; Camilleri, Michael

    2018-02-01

    Imbalance of bile acids (BA) homeostasis in the gastrointestinal tract can lead to chronic diarrhea or constipation when BA in the colon are in excess or low, respectively. Since both disturbances of bowel function can result from other etiologies, identifying BA imbalance is important to tailor treatment strategies. Serum concentrations of 7-alpha-hydroxy-4-cholesten-3-one (7aC4), a precursor in bile acid synthesis, reflect BA homeostasis. Here we describe a method to accurately measure serum 7aC4 and evaluate the clinical utility in patients with diarrhea or constipation phenotypes. Serum 7aC4 is measured after acetonitrile protein precipitation using C18 liquid chromatography, tandem mass spectrometry, and deuterium-labeled 7aC4 internal standard. Assay performance including linearity, precision, and accuracy was assessed using waste serum samples. The reference interval was established in healthy individuals without BA-altering conditions or medications. Clinical performance was assessed in patients with irritable bowel syndrome. The method precisely and accurately measured 7aC4 in human serum from 1.4-338ng/mL with no ion suppression or interference from related 7-keto-cholesterol. Central 95th percentile reference interval was 2.5-63.2ng/mL. Lower serum 7aC4 was found in patients with constipation with sensitivity/specificity of 79%/55% compared to healthy controls. Higher 7aC4 was found in patients with bile acid diarrhea (BAD) compared to those without BAD with sensitivity/specificity of 82%/53%. We have developed a sensitive and precise assay for measuring the concentration of 7aC4 in serum. The assay can be used to screen for diarrhea caused by bile acid malabsorption. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  8. Historical note: Drumine--a new Australian local anaesthetic.

    Science.gov (United States)

    Bailey, R J

    1977-02-01

    An article in the Australiasian Medical Gazette of October, 1886 indicates the method of extraction, experimentation and therapeutic application of an active principle, prepared from Euphorbia Drummondii. Further correspondence is noted, refining the method of extraction, reporting cases, answering criticisms, and announcing eventually, drumine's commercial preparation. Despite enthusiastic support, the drug soon disappears from the therapeutic scene.

  9. Lecture notes on diophantine analysis

    CERN Document Server

    Zannier, Umberto

    2014-01-01

    These lecture notes originate from a course delivered at the Scuola Normale in Pisa in 2006. Generally speaking, the prerequisites do not go beyond basic mathematical material and are accessible to many undergraduates. The contents mainly concern diophantine problems on affine curves, in practice describing the integer solutions of equations in two variables. This case historically suggested some major ideas for more general problems. Starting with linear and quadratic equations, the important connections with Diophantine Approximation are presented and Thue's celebrated results are proved in full detail. In later chapters more modern issues on heights of algebraic points are dealt with, and applied to a sharp quantitative treatment of the unit equation. The book also contains several Supplements, hinted exercises and an Appendix on recent work on heights.

  10. Lecture notes on wavelet transforms

    CERN Document Server

    Debnath, Lokenath

    2017-01-01

    This book provides a systematic exposition of the basic ideas and results of wavelet analysis suitable for mathematicians, scientists, and engineers alike. The primary goal of this text is to show how different types of wavelets can be constructed, illustrate why they are such powerful tools in mathematical analysis, and demonstrate their use in applications. It also develops the required analytical knowledge and skills on the part of the reader, rather than focus on the importance of more abstract formulation with full mathematical rigor.  These notes differs from many textbooks with similar titles in that a major emphasis is placed on the thorough development of the underlying theory before introducing applications and modern topics such as fractional Fourier transforms, windowed canonical transforms, fractional wavelet transforms, fast wavelet transforms, spline wavelets, Daubechies wavelets, harmonic wavelets and non-uniform wavelets. The selection, arrangement, and presentation of the material in these ...

  11. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  12. Transgastric pure-NOTES peritoneoscopy and endoscopic ultrasonography for staging of gastrointestinal cancers

    DEFF Research Database (Denmark)

    Donatsky, Anders Meller; Vilmann, Peter; Meisner, Søren

    2012-01-01

    BACKGROUND: Human natural orifice transluminal endoscopic surgery (NOTES) has mainly been based on simultaneous laparoscopic assistance (hybrid NOTES), forgoing the theoretical benefits of the NOTES technique. This is due to a lack of NOTES-specific instruments and endoscopes, making pure-NOTES...... procedures difficult and time consuming. An area where pure NOTES could be adopted at its present stage of development is minimally invasive staging of gastrointestinal (GI) cancer. The aim of this study is to evaluate the feasibility of combining transgastric (TG) pure-NOTES peritoneoscopy...... and intraperitoneal endoscopic ultrasonography (ip-EUS) with intraluminal EUS (il-EUS) for peritoneal evaluation. METHODS: This was a feasibility and survival study where il-EUS followed by ip-EUS and peritoneoscopy was performed in 10 pigs subjected to TG pure NOTES. A score was given with regard to achieved...

  13. Interface description using computational methods and tribological characteristic of Ti N/Ti C films prepared by reactive pulse arc evaporation technique

    International Nuclear Information System (INIS)

    Devia N, D. M.; Gonzalez C, J. M.; Ruden M, A.

    2013-01-01

    The Ti N/Ti C bilayers have been deposited by Plasma Assisted Physical Vapor Deposition Technique - Reactive Pulsed Arc. The coatings were analyzed by X-ray photoelectron spectroscopy (XP S) and X-ray diffraction (XRD). From the signal treatment of the narrow XP S spectra and the XRD diffraction patterns, the formation of Ti N (titanium nitride), Ti C (titanium carbide) and Ti CN (titanium carbonitride) was confirmed, with fm-3m spatial group, corresponding to the Fcc phase of the synthesized compounds. The multilayer was simulated using Density Functional Theory (DFT) by the Unrestricted Hartree Fock method. Charge distributions and electron total density were obtained; finding bond formation at the interphase, electrical neutrality and system stability. Anomalies in the corners of the structures due to edge effect, simulation ideality and the no internal tension inclusion, intrinsic to the growing, are observed. The ball on disc tribometer was used to measure the friction and wear coefficient to verify the interface formation. (Author)

  14. Interface description using computational methods and tribological characteristic of Ti N/Ti C films prepared by reactive pulse arc evaporation technique

    Energy Technology Data Exchange (ETDEWEB)

    Devia N, D. M. [Universidad Nacional de Colombia, Sede Manizales, Campus La Nubia, Manizales, Caldas (Colombia); Gonzalez C, J. M.; Ruden M, A., E-mail: dmdevian@utp.edu.co [Universidad del Valle, Edificio 349, espacio 1003, Ciudad Universitaria Melendez, Cali (Colombia)

    2013-10-01

    The Ti N/Ti C bilayers have been deposited by Plasma Assisted Physical Vapor Deposition Technique - Reactive Pulsed Arc. The coatings were analyzed by X-ray photoelectron spectroscopy (XP S) and X-ray diffraction (XRD). From the signal treatment of the narrow XP S spectra and the XRD diffraction patterns, the formation of Ti N (titanium nitride), Ti C (titanium carbide) and Ti CN (titanium carbonitride) was confirmed, with fm-3m spatial group, corresponding to the Fcc phase of the synthesized compounds. The multilayer was simulated using Density Functional Theory (DFT) by the Unrestricted Hartree Fock method. Charge distributions and electron total density were obtained; finding bond formation at the interphase, electrical neutrality and system stability. Anomalies in the corners of the structures due to edge effect, simulation ideality and the no internal tension inclusion, intrinsic to the growing, are observed. The ball on disc tribometer was used to measure the friction and wear coefficient to verify the interface formation. (Author)

  15. An introduction to and description of the first Spanish applications of slôjd (a system of manual work following the Swedish Nads method

    Directory of Open Access Journals (Sweden)

    Francesca COMAS RUBÍ

    2013-11-01

    Full Text Available The study and application of the Nads slôjd system of manual work with wood is known to have become a compulsory part of the syllabus in Spanish state schools in 1901, thanks to a Royal Decree signed by the then Minister of Education, the Honourable Romanones. However, written history is far less familiar with questions such as how this system came to be known in Spain, when it was introduced, who encouraged its use or where and how it was first applied. In this study, with the aid of a large number of hitherto unpublished documents (some of which were found in Nààs, Sweden, we shall try to answer these questions and, as a result, produce a detailed analysis of the introduction of Nads slojd to Spain at the end of the 19th century, strangely enough (or perhaps not under the clear, but implicit influence of the Spanish movement for free-thinking methods of education.

  16. The "Performance of Rotavirus and Oral Polio Vaccines in Developing Countries" (PROVIDE) study: description of methods of an interventional study designed to explore complex biologic problems.

    Science.gov (United States)

    Kirkpatrick, Beth D; Colgate, E Ross; Mychaleckyj, Josyf C; Haque, Rashidul; Dickson, Dorothy M; Carmolli, Marya P; Nayak, Uma; Taniuchi, Mami; Naylor, Caitlin; Qadri, Firdausi; Ma, Jennie Z; Alam, Masud; Walsh, Mary Claire; Diehl, Sean A; Petri, William A

    2015-04-01

    Oral vaccines appear less effective in children in the developing world. Proposed biologic reasons include concurrent enteric infections, malnutrition, breast milk interference, and environmental enteropathy (EE). Rigorous study design and careful data management are essential to begin to understand this complex problem while assuring research subject safety. Herein, we describe the methodology and lessons learned in the PROVIDE study (Dhaka, Bangladesh). A randomized clinical trial platform evaluated the efficacy of delayed-dose oral rotavirus vaccine as well as the benefit of an injectable polio vaccine replacing one dose of oral polio vaccine. This rigorous infrastructure supported the additional examination of hypotheses of vaccine underperformance. Primary and secondary efficacy and immunogenicity measures for rotavirus and polio vaccines were measured, as well as the impact of EE and additional exploratory variables. Methods for the enrollment and 2-year follow-up of a 700 child birth cohort are described, including core laboratory, safety, regulatory, and data management practices. Intense efforts to standardize clinical, laboratory, and data management procedures in a developing world setting provide clinical trials rigor to all outcomes. Although this study infrastructure requires extensive time and effort, it allows optimized safety and confidence in the validity of data gathered in complex, developing country settings. © The American Society of Tropical Medicine and Hygiene.

  17. Acoustic control system BN-350. Explanatory note

    International Nuclear Information System (INIS)

    1982-02-01

    A description of the acoustic system developed to control boiling in the active zone of the BN 350 reactor is given together with the corresponding technical characteristics. The results of experiments and calculations which confirm the validity of the solutions adopted are discussed. Theoretical calculations on the boiling process in the duct are reported together with details on the fast diagnostic system. A means for localizing the onset of boiling is also given, possible error being taken into consideration. The special features of the passive acoustic diagnostic method used to study boiling are described and schemas of the anciliary equipment presented [fr

  18. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

  19. Some Notes and Critiques of Selected Lexicographic Texts in Bikol

    Directory of Open Access Journals (Sweden)

    Louward Allen Zubiri

    2014-12-01

    Full Text Available This study revolves around notes and critiques of Bikol lexicography. Based on a selection of six dictionaries, the structure and diachronic development of Bikol lexicography were analyzed. Half of the selected dictionaries were authored in full or part by Malcolm Mintz, a renowned Bikol expert. These enabled a linear analysis of changes in lexicography that have occurred within the span of four decades. The dictionaries studied include the earliest and most influential Bikol dictionary of Lisboa (1865. The study presents a preliminary description of lexicographic work done in Bikol and traces the shift in the paradigm of dictionary making from the Spanish era to the present.

  20. Studies on Neotropical Phasmatodea XVI: Revision of Haplopodini Günther, 1953 (rev. stat.), with notes on the subfamily Cladomorphinae Bradley & Galil, 1977 and the descriptions of a new tribe, four new genera and nine new species (Phasmatodea: "Anareolatae": Phasmatidae: Cladomorphinae).

    Science.gov (United States)

    Hennemann, Frank H; Conle, Oskar V; Perez-Gelabert, Daniel E

    2016-06-27

    along with a discussion of the distributional patterns. Detailed descriptions, differential diagnoses, synonymic listings, illustrations, material listings and measurements are given of all 26 currently known species and subspecies of Haplopodini. Four new genera are described within Haplopodini. The monotypical Apteroplopus n. gen. (type-species: Dyme grosse-tuberculata Brunner v. Wattenwyl, 1907) from Honduras is the only taxon of the tribe represented in Central America. It is only known from the male which differs from all other genera by being entirely apterous. Cephaloplopus n. gen. (type-species: Cephaloplopus pulchellus n. sp.) and Parhaplopus n. gen. (type-species: Haplopus cubensis Saussure, 1868) occur only on Hispaniola and Cuba. Both are closely related to Haplopus Burmeister, 1838 but in addition to having noticeably different eggs, both genera differ from Haplopus in several morphological characters. The monotypical Venupherodes n. gen. (type-species: Platycrana venustula Audinet-Serville, 1838) is endemic to Cuba, and in females being apterous resembles the second exclusively Cuban genus Aploploides Rehn & Hebard, 1938. It however differs from all other members of Haplopodini by the laterally expanded mesonotum of females, which overlaps the mesopleurae, as well as the morphology of the eggs. Two species-groups are recognized within Diapherodes Gray, 1835. The gigantea species-group comprises the species from the Lesser Antilles, which are: D. angulata (Fabricius, 1793), Diapherodes dominicae (Rehn & Hebard, 1938), D. gigantea gigantea (Gmélin, 1789), D. gigantea saintluciae n. ssp. and Diapherodes martinicensis Lelong & Langlois, 2005. The three species of the jamaicensis species-group, which are D. achalus (Rehn, 1904), D. jamaicensis (Drury, 1773) and D. laevicollis Redtenbacher, 1906, are restricted to the two Greater Antillean islands Jamaica and Puerto Rico. Haplopus Burmeister, 1838 is the most widely distributed genus being represented on all

  1. A cautionary note on the rank product statistic.

    Science.gov (United States)

    Koziol, James A

    2016-06-01

    The rank product method introduced by Breitling R et al. [2004, FEBS Letters 573, 83-92] has rapidly generated popularity in practical settings, in particular, detecting differential expression of genes in microarray experiments. The purpose of this note is to point out a particular property of the rank product method, namely, its differential sensitivity to over- and underexpression. It turns out that overexpression is less likely to be detected than underexpression with the rank product statistic. We have conducted both empirical and exact power studies that demonstrate this phenomenon, and summarize these findings in this note. © 2016 Federation of European Biochemical Societies.

  2. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  3. Quality of outpatient clinical notes: a stakeholder definition derived through qualitative research.

    Science.gov (United States)

    Hanson, Janice L; Stephens, Mark B; Pangaro, Louis N; Gimbel, Ronald W

    2012-11-19

    groups provide a comprehensive description of quality in outpatient clinical documentation. The resulting description of characteristics and content necessary for quality notes provides a research-based foundation for assessing the quality of clinical documentation in outpatient health care settings.

  4. Notes on neutron flux measurement

    International Nuclear Information System (INIS)

    Alcala Ruiz, F.

    1984-01-01

    The main purpose of this work is to get an useful guide to carry out topical neutron flux measurements. Although the foil activation technique is used in the majority of the cases, other techniques, such as those based on fission chambers and self-powered neutron detectors, are also shown. Special interest is given to the description and application of corrections on the measurement of relative and absolute induced activities by several types of detectors (scintillators, G-M and gas proportional counters). The thermal arid epithermal neutron fluxes, as determined in this work, are conventional or effective (West cots fluxes), which are extensively used by the reactor experimentalists; however, we also give some expressions where they are related to the integrated neutron fluxes, which are used in neutron calculations. (Author) 16 refs

  5. A Note on Magic Squares

    Science.gov (United States)

    Williams, Horace E.

    1974-01-01

    A method for generating 3x3 magic squares is developed. A series of questions relating to these magic squares is posed. An invesitgation using matrix methods is suggested with some questions for consideration. (LS)

  6. WKB: an interactive code for solving differential equations using phase integral methods

    International Nuclear Information System (INIS)

    White, R.B.

    1978-01-01

    A small code for the analysis of ordinary differential equations interactively through the use of Phase Integral Methods (WKB) has been written for use on the DEC 10. This note is a descriptive manual for those interested in using the code

  7. Notes on the quantum tetrahedron

    CERN Document Server

    Coquereaux, Robert

    2002-01-01

    This is a set of notes describing several aspects of the space of paths on ADE Dynkin diagrams, with a particular attention paid to the graph E6. Many results originally due to A. Ocneanu are here described in a very elementary way (manipulation of square or rectangular matrices). We define the concept of essential matrices for a graph and describe their module properties with respect to right and left actions of fusion algebras. In the case of the graph E6, essential matrices build up a right module with respect to its fusion algebra but a left module with respect to the fusion algebra of A11. We present two original results: 1) We show how to recover the Ocneanu graph of quantum symmetries of the Dynkin diagram E6 from the natural multiplication defined in the tensor square of its fusion algebra (the tensor product should be taken over a particular subalgebra); this is the Cayley graph for the two generators of the twelve dimensional algebra (E6 \\otimes_A3 E6); here A3 and E6 refer to the commutative fusion...

  8. Revisiting convergence: A research note.

    Science.gov (United States)

    Clark, Rob

    2015-09-01

    A number of recent studies show that income inequality is declining between countries. In this research note, I question the significance of this trend by examining the role of initial conditions in producing convergence. An important (but neglected) property of inequality dynamics is the tendency for extreme distributions to become more moderate. When income disparities are large, the subsequent trend is biased toward convergence. Conversely, when initial conditions approach parity, divergence becomes the more likely long-term outcome. I apply this principle to trends in GDP PC across 127 countries during the 1980-2010 period. Using counterfactual analysis, I manipulate the initial level of inequality in GDP PC while holding constant each country's observed growth rate during the sample period. I find that the growth dynamics of GDP PC produce either convergence or divergence based simply on the initial distribution of income. The point of transition occurs at a moderate level of inequality, whether using population weights (Gini=.365) or not (Gini=.377). I conclude that the recent convergence observed in GDP PC is primarily a function of large income gaps between countries and would not have materialized at more moderate levels of initial inequality. By contrast, an examination of the pre-1950 period reveals divergent growth patterns that are not sensitive to initial conditions. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Notes on the Spatial Turn

    Directory of Open Access Journals (Sweden)

    Stipe Grgas

    2012-06-01

    Full Text Available On the basis of ever-mounting evidence, amongst which is the “zone” problematic of the Zadar conference that occassioned these notes, it can be concluded that the spatial turn has insinuated itself as an all-pervading heuristic tool throughout the humanities and the social sciences. The extent to which space and spatiality have usurped the central stage in the various branches of reasearch can be gauged by admonishments that what we are witnessing is a new fundamentalism that has simply inverted the terms of the dualism of time and space (May and Thrift 2001: “Introduction”. According to Michael Dear the sway of space is manifested in multifold ways: in the ubiquity of spatial analysis in social theories and practices; in the explosion of publications devoted to the exploration of the interface of the social and the spatial; in the reintegration of human geography into various domains of knowledge; in the focus given to difference and the consequent diversification of theoretical and empirical practices; in a theoretically informed exploration of the relation between geographical knowledge and social action; and, finally, in the unprecedented proliferation of research agendas and publications pertaining to these isuuses (Dear 2001: 24. Two recent collections of papers are indicative of the ubiquity of spatial issues in scholarly work.

  10. Coupling an analytical description of anti-scatter grids with simulation software of radiographic systems using Monte Carlo code; Couplage d'une methode de description analytique de grilles anti diffusantes avec un logiciel de simulation de systemes radiographiques base sur un code Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Rinkel, J.; Dinten, J.M.; Tabary, J

    2004-07-01

    The use of focused anti-scatter grids on digital radiographic systems with two-dimensional detectors produces acquisitions with a decreased scatter to primary ratio and thus improved contrast and resolution. Simulation software is of great interest in optimizing grid configuration according to a specific application. Classical simulators are based on complete detailed geometric descriptions of the grid. They are accurate but very time consuming since they use Monte Carlo code to simulate scatter within the high-frequency grids. We propose a new practical method which couples an analytical simulation of the grid interaction with a radiographic system simulation program. First, a two dimensional matrix of probability depending on the grid is created offline, in which the first dimension represents the angle of impact with respect to the normal to the grid lines and the other the energy of the photon. This matrix of probability is then used by the Monte Carlo simulation software in order to provide the final scattered flux image. To evaluate the gain of CPU time, we define the increasing factor as the increase of CPU time of the simulation with as opposed to without the grid. Increasing factors were calculated with the new model and with classical methods representing the grid with its CAD model as part of the object. With the new method, increasing factors are shorter by one to two orders of magnitude compared with the second one. These results were obtained with a difference in calculated scatter of less than five percent between the new and the classical method. (authors)

  11. Open Oncology Notes: A Qualitative Study of Oncology Patients' Experiences Reading Their Cancer Care Notes.

    Science.gov (United States)

    Kayastha, Neha; Pollak, Kathryn I; LeBlanc, Thomas W

    2018-04-01

    Electronic medical records increasingly allow patients access to clinician notes. Although most believe that open notes benefits patients, some suggest negative consequences. Little is known about the experiences of patients with cancer reading their medical notes; thus we aimed to describe this qualitatively. We interviewed 20 adults with metastatic or incurable cancer receiving cancer treatment. The semistructured qualitative interviews included four segments: assessing their overall experience reading notes, discussing how notes affected their cancer care experiences, reading a real note with the interviewer, and making suggestions for improvement. We used a constant comparison approach to analyze these qualitative data. We found four themes. Patients reported that notes resulted in the following: (1) increased comprehension; (2) ameliorated uncertainty, relieved anxiety, and facilitated control; (3) increased trust; and (4) for a subset of patients, increased anxiety. Patients described increased comprehension because notes refreshed their memory and clarified their understanding of visits. This helped mitigate the unfamiliarity of cancer, addressing uncertainty and relieving anxiety. Notes facilitated control, empowering patients to ask clinicians more questions. The transparency of notes also increased trust in clinicians. For a subset of patients, however, notes were emotionally difficult to read and raised concerns. Patients identified medical jargon and repetition in notes as areas for improvement. Most patients thought that reading notes improved their care experiences. A small subset of patients experienced increased distress. As reading notes becomes a routine part of the patient experience, physicians might want to elicit and address concerns that arise from notes, thereby further engaging patients in their care.

  12. A note on the preconditioner Pm=(I+Sm)

    Science.gov (United States)

    Kohno, Toshiyuki; Niki, Hiroshi

    2009-03-01

    Kotakemori et al. [H. Kotakemori, K. Harada, M. Morimoto, H. Niki, A comparison theorem for the iterative method with the preconditioner (I+Smax), Journal of Computational and Applied Mathematics 145 (2002) 373-378] have reported that the convergence rate of the iterative method with a preconditioner Pm=(I+Sm) was superior to one of the modified Gauss-Seidel method under the condition. These authors derived a theorem comparing the Gauss-Seidel method with the proposed method. However, through application of a counter example, Wen Li [Wen Li, A note on the preconditioned GaussSeidel (GS) method for linear systems, Journal of Computational and Applied Mathematics 182 (2005) 81-91] pointed out that there exists a special matrix that does not satisfy this comparison theorem. In this note, we analyze the reason why such a to counter example may be produced, and propose a preconditioner to overcome this problem.

  13. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  14. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  15. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  16. Note: Additionally refined new possibilities of plasma probe diagnostics

    Science.gov (United States)

    Riaby, V. A.; Savinov, V. P.; Masherov, P. E.; Yakunin, V. G.

    2018-03-01

    In two previous Notes published in this journal, a method of measuring probe sheath thickness and ion mass was described using Langmuir probe diagnostics in low pressure xenon plasma close to Maxwellian substance. According to the first Note, this method includes two stages: (i) in a special experiment with known ion mass, the Bohm and Child-Langmuir-Boguslavsky (CLB) equations for cylindrical Langmuir probes used in this xenon plasma were solved jointly to determine the probe sheath thicknesses and Bohm coefficient CBCyl ≈ 1.13; and (ii) in a general experiment, with known CBCyl, the same equations could be solved to obtain the probe sheath thicknesses and the mean ion mass. In the second Note, the (i) stage of this method was refined: the results of the CLB probe sheath model application, which were termed "evaluations," were corrected using the step-front probe sheath model, which was closer to reality in the special experiment with the xenon plasma. This process resulted in a Bohm coefficient of CBCyl ≈ 1.23 for the cylindrical probe. In the present Note, corrected xenon plasma parameters without the influence of the bare probe protective shield were used for the (i) stage of this diagnostic method. This action also refined the Bohm coefficient, lowering it to CBCyl ≈ 0.745 for cylindrical probes. This advance makes the new diagnostics method more objective and reliable.

  17. Station Program Note Pull Automation

    Science.gov (United States)

    Delgado, Ivan

    2016-01-01

    Upon commencement of my internship, I was in charge of maintaining the CoFR (Certificate of Flight Readiness) Tool. The tool acquires data from existing Excel workbooks on NASA's and Boeing's databases to create a new spreadsheet listing out all the potential safety concerns for upcoming flights and software transitions. Since the application was written in Visual Basic, I had to learn a new programming language and prepare to handle any malfunctions within the program. Shortly afterwards, I was given the assignment to automate the Station Program Note (SPN) Pull process. I developed an application, in Python, that generated a GUI (Graphical User Interface) that will be used by the International Space Station Safety & Mission Assurance team here at Johnson Space Center. The application will allow its users to download online files with the click of a button, import SPN's based on three different pulls, instantly manipulate and filter spreadsheets, and compare the three sources to determine which active SPN's (Station Program Notes) must be reviewed for any upcoming flights, missions, and/or software transitions. Initially, to perform the NASA SPN pull (one of three), I had created the program to allow the user to login to a secure webpage that stores data, input specific parameters, and retrieve the desired SPN's based on their inputs. However, to avoid any conflicts with sustainment, I altered it so that the user may login and download the NASA file independently. After the user has downloaded the file with the click of a button, I defined the program to check for any outdated or pre-existing files, for successful downloads, to acquire the spreadsheet, convert it from a text file to a comma separated file and finally into an Excel spreadsheet to be filtered and later scrutinized for specific SPN numbers. Once this file has been automatically manipulated to provide only the SPN numbers that are desired, they are stored in a global variable, shown on the GUI, and

  18. Lecture note on neutron and photon transport calculation with MCNP

    International Nuclear Information System (INIS)

    Sakurai, Kiyoshi

    2003-01-01

    This paper is a lecture note on the continuous energy Monte Carlo method. The contents are as follows; history of the Monte Carlo study, continuous energy Monte Carlo codes, libraries, evaluation method for calculation results, integral emergent particle density equation, pseudorandom number, random walk, variance reduction techniques, MCNP weight window method, MCNP weight window generator, exponential transform, estimators, criticality problem and research subjects. This paper is a textbook for beginners on the Monte Carlo calculation. (author)

  19. Employers' views on the fit note.

    Science.gov (United States)

    Kotze, E

    2014-12-01

    The fit note replaced the sick note in 2010. The statement of fitness for work (fit note) is expected to benefit the British economy by helping more people stay in work and prevent long-term sickness absence. Understanding and responding to employers' views on the fit note is key, in order for this goal to be achieved. To explore employers' views on the fit note. A qualitative study was undertaken and face-to-face interviews were conducted with participants representing employers from a variety of industries. There were 21 participants who were mainly human resources officers and line managers. Employers welcomed the introduction of the fit note and felt that it was an improvement on the sick note. The majority of employers felt the fit note had the potential to promote an earlier return to work, if used properly. The main problems reported were the completion of the fit notes and quality of advice received from general practitioners. Employers felt that the most helpful advice came from fit notes with information on the functional effects of the medical condition. Some employers found return to work decisions problematic. The fit note has the potential to promote an earlier return to work. In order for the fit note to achieve its aim, further understanding of the difficulties employers are having when making return to work decisions is important, in order to develop guidance to enable them to provide the practical support employees need to return to work sooner. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Clinical Note Creation, Binning, and Artificial Intelligence

    OpenAIRE

    Deliberato, Rodrigo Oct?vio; Celi, Leo Anthony; Stone, David J

    2017-01-01

    The creation of medical notes in software applications poses an intrinsic problem in workflow as the technology inherently intervenes in the processes of collecting and assembling information, as well as the production of a data-driven note that meets both individual and healthcare system requirements. In addition, the note writing applications in currently available electronic health records (EHRs) do not function to support decision making to any substantial degree. We suggest that artifici...

  1. Descriptive data analysis.

    Science.gov (United States)

    Thompson, Cheryl Bagley

    2009-01-01

    This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

  2. Osiris reactor descriptive report

    International Nuclear Information System (INIS)

    1976-03-01

    OSIRIS is a swimming pool reactor of 70 MW thermal power. Its main purpose is the irradiation of reactor materials in high neutron flux. A description is given of the air conditioning, ventilation, and radioactive gas removal system. (R.L.)

  3. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  4. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  5. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  6. A Note on the Stability of the Job Descriptive Index (J. D. I.).

    Science.gov (United States)

    1978-05-01

    AND A D D R E S S 10. P R O G R A M ELEMENT , PROJE CT , TASK A R E A & WORK UNIT NUMBER S Departme nt of Psychology 6 l l53 N University of...Center , University of Mary land , College Park 19. KEY WOR DS (Con t inue on re v e rse aids II necalaary ~ td ident ify by block num ber) Attitudes

  7. Notes on Wyeomyia Mosquitoes of Suriname, with a Description of Wyeomyia surinamensis sp.n.

    NARCIS (Netherlands)

    Bruijning, C.F.A.

    1959-01-01

    Most of the material recorded in this paper was collected by the author during his stay in Suriname from 1949 to 1955. By courtesy of Mrs. J. BONNE-WEPSTER, the author was enabled to study the Wyeomyia specimens which were collected by BONNE and BONNE-WEPSTER in Suriname and are at present in the

  8. Notes on the genus Abantis Hopffer, 1855 with description of two new species (Lepidoptera: Hesperiidae, Pyrginae

    Directory of Open Access Journals (Sweden)

    Claudio Belcastro

    2016-06-01

    Full Text Available The Afrotropical genus Abantis Hopffer, 1855 includes about 23 species so far, all quite rare. In Evans’ Catalogue of the African Hesperiidae only 14 species were listed but, apart from a few newly discovered ones, some of the subspecies indicated over there have subsequently been raised to species level, although they look very similar in facies with previously recognised taxa. This article shows the presence of an unrecognised species similar to A. lucretia Druce, 1909 in West Africa, namely A. fabiana sp. n., and another one similar to both A. contigua Evans, 1937 and A. elegantula Mabille, 1890 in Central Africa, namely A. torbeni sp. n. The rarity in collections of almost all forest-dwelling Abantis spp. is reported as connected to their habit of flying high in the forest canopy, but the authors have no conclusive evidence of it. Most Abantis are hill-toppers, mud lovers and are attracted by dead animals (fish and turtles, although some of them are also flower-visiting.

  9. Some preliminary notes on Surinam Sting Rays, including the description of a new species

    NARCIS (Netherlands)

    Boeseman, M.

    1948-01-01

    In Dr. D. C. Geijskes' collection of Surinam fishes, mentioned in my previous paper on this subject (Boeseman, 1948), I found six specimens belonging to the so-called "sting rays" (Dasyatidae), representing three different species, and all very interesting in some respects. I. Dasyatis schmardae

  10. Note on the hydrodynamic description of thin nematic films: Strong anchoring model

    KAUST Repository

    Lin, Te-Sheng; Cummings, Linda J.; Archer, Andrew J.; Kondic, Lou; Thiele, Uwe

    2013-01-01

    We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. © 2013 AIP Publishing LLC.

  11. Taxonomic notes and description of the male of Xenochlora nigrofemorata (Smith, 1879) (Hymenoptera: Apidae: Halictinae).

    Science.gov (United States)

    Santos, Leandro M; Melo, Gabriel A R

    2013-01-01

    The present work describes for the first time the male of the bee genus Xenochlora Engel, Brooks & Yanega, 1997. The male of X. nigrofemorata (Smith, 1879) is described and illustrated. Additionally, Megalopta opacicollis Friese, 1926 is placed as a junior synonym of X. nigrofemorata (Smith, 1879).

  12. Notes on the tribe Mimagathidini Enderlein, with the description of a new genus (Hymenoptera: Braconidae: Orgilinae)

    NARCIS (Netherlands)

    Braet, Y.; Achterberg, van C.; Chen, X.

    2000-01-01

    Eleonoria gen. nov. (type species: E. mesembria spec. nov. from Malaysia; five additional species from Japan, China (including Taiwan), Philippines, and Indonesia (Halmahera) are included), Orgilonia pasohensis spec. nov. from Malaysia, Orgilus reclinatus spec. nov. from Congo, O. alboannulatus

  13. Technical Note: Description and assessment of a nudged version of the new dynamics Unified Model

    Directory of Open Access Journals (Sweden)

    O. Morgenstern

    2008-03-01

    Full Text Available We present a "nudged" version of the Met Office general circulation model, the Unified Model. We constrain this global climate model using ERA-40 re-analysis data with the aim of reproducing the observed "weather" over a year from September 1999. Quantitative assessments are made of its performance, focusing on dynamical aspects of nudging and demonstrating that the "weather" is well simulated.

  14. Taxonomic notes on Chironomidae (Diptera from Okinawa Island, Japan, with the description of three new species

    Directory of Open Access Journals (Sweden)

    Masaru Yamamoto

    2015-07-01

    Full Text Available Three new species: Ionthosmittia cuneipenne sp. nov., Orthocladius (Euorthocladius okinawanus sp. nov. and Parakiefferiella semiovata sp. nov., are described from Okinawa Island, Ryukyus, Japan. In addition to these species, twelve species are newly recorded from this island. Diagnostic characters of Tokyobrillia tamamegaseta (Kobayashi et Sasa are emended. Pentapedilum yakuabeum Sasa et Suzuki syn. nov. and Polypedilum yakucedeum Sasa et Suizuki syn. nov. are junior synonyms of Ainuyusurika tuberculatum (Tokunaga. Einfeldia kanazawai (Yamamoto is transferred to the genus Chironomus Meigen and its systematic position is discussed.

  15. Description of male Tylorida sataraensis Kulkarni, 2014 (Araneae, Tetragnathidae with notes on habits and conservation status

    Directory of Open Access Journals (Sweden)

    Siddharth Kulkarni

    2015-02-01

    Full Text Available The male sex of Tylorida sataraensis Kulkarni, 2014 is described based on specimens from the type locality. The distinguishing characters from its closest species Tylorida ventralis (Thorell, 1877 are detailed. An interesting behaviour of going underwater by T. sataraensis, on disturbance is recorded and tested for significance. The surveys have shown sighting of this species only to the perennial streams of the rocky outcrops in Satara region. The potential threats to this species and the possible conservation status based on known distribution are discussed.

  16. Notes on Pauropoda (Myriapoda from U.S.A. with descriptions of two new species

    Directory of Open Access Journals (Sweden)

    Ulf Scheller

    2011-07-01

    Full Text Available Two new species of Pauropoda are described from USA, Kionopauropus alyeskaensis sp. n. (Pauropodidae, and Eurypauropus arcuatus sp. n. (Eurypauropodidae. The genus Kionopauropus is reported from the Western Hemisphere for the first time.

  17. Revisionary notes on Bentonia van Achterberg, 1992 (Hymenoptera: Braconidae: Orgilinae) with description of two new species

    NARCIS (Netherlands)

    Braet, Y.; Tignon, M.

    1998-01-01

    Two new species of the genus Bentonia van Achterberg, 1992 (Braconidae: Orgilinae) (B. inca from Peru and B. xochiquetzalis from Mexico) are described and partly illustrated. A third undescribed species was found for which some characters are listed. The distribution of B. scutellaris van

  18. 48 CFR 14.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it is...

  19. 48 CFR 514.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature. [74 FR 47739, Sept. 17, 2009] ...

  20. Notes on Loricata (Mollusca) 11-14

    NARCIS (Netherlands)

    Kaas, P.

    1985-01-01

    Four new species of chitons (Mollusca, Polyplacophora) are described, viz Leptochiton (L.) dispersus and L. (L.) permodestus from Transkei, L. (L.) meiringae from the eastern Cape Province, S Africa (note 11) and Ischnochiton (Stenosemus) vanbellei from the Mediterranean Sea (note 14). New records

  1. Suicide Notes in Hong Kong in 2000

    Science.gov (United States)

    Wong, Paul W. C.; Yeung, April W. M.; Chan, Wincy S. C.; Yip, Paul S. F.; Tang, Arthur K. H.

    2009-01-01

    Suicide notes have been regarded as one of the most informative data sources to understand the reasons why people commit suicide. However, there is a paucity of suicide note studies, leaving researchers with an assumption that this phenomenon remains static over time. This study examines this assumption by comparing the characteristics of…

  2. Stalin and Marxism: a research note

    NARCIS (Netherlands)

    van Ree, E.

    1997-01-01

    This article concerns the research done by the author in Stalin‘s private library. The notes made in the works of Marx, Engels and Lenin suggest that until the end of his life Stalin felt himself in general agreement with these "classics." The choice of books and the notes support the thesis that,

  3. Children's note taking as a mnemonic tool.

    Science.gov (United States)

    Eskritt, Michelle; McLeod, Kellie

    2008-09-01

    When given the opportunity to take notes in memory tasks, children sometimes make notes that are not useful. The current study examined the role that task constraints might play in the production of nonmnemonic notes. In Experiment 1, children played one easy and one difficult memory game twice, once with the opportunity to make notes and once without that opportunity. More children produced functional notations for the easier task than for the more difficult task, and their notations were beneficial to memory performance. Experiment 2 found that the majority of children who at first made nonmnemonic notations were able to produce functional notations with minimal training, and there was no significant difference in notation quality or memory performance between spontaneous and trained note takers. Experiment 3 revealed that the majority of children could transfer their training to a novel task. The results suggest that children's production of nonmnemonic notes may be due in part to a lack of knowledge regarding what task information is important to represent or how to represent it in their notes rather than to an inability to make functional notes in general.

  4. Observing professionals taking notes on screen

    NARCIS (Netherlands)

    Melenhorst, M.S.

    2005-01-01

    In this study 38 participants wrote a piece of advice based on reading and annotating information from an extensive Web site. Half of the participants took notes in a separate window, the other half used an advanced annotation tool. In text annotations were far more used than separate notes. The

  5. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  6. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  7. Input description for BIOPATH

    International Nuclear Information System (INIS)

    Marklund, J.E.; Bergstroem, U.; Edlund, O.

    1980-01-01

    The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

  8. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  9. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

  10. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  11. Principle of the determination of neutron multiplication coefficients by the Monte Carlo method. Application. Description of a code for ibm 360-75; Principe de la determination des coefficients de multiplication neutronique par methode de Monte-Carlo. Application. Description d'un code pour IBM 360-75

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, J; Parisot, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The determination of neutron multiplication coefficients by the Monte Carlo method can be carried out in different ways; the are first examined particularly complex geometries; it makes use of multi-group isotropic cross sections. The performances of this code are illustrated by some examples. (author) [French] La determination des coefficients de multiplication neutronique par methode de Monte Carlo peut se faire par differentes voies, elles sont successivement examinees et comparees. On en deduit un code rapide pour des geometries particulierement complexes, il utilise des sections efficaces multigroupes isotropes. Les performances de ce code sont demontrees par quelques exemples. (auteur)

  12. Suicide note themes and suicide prevention.

    Science.gov (United States)

    Foster, Tom

    2003-01-01

    The aim was to determine if suicide note themes might inform suicide prevention strategies. The themes of 42 suicide notes from the Northern Ireland Suicide Study (major psychological autopsy study) were examined. The commonest themes were "apology/shame" (74%), "love for those left behind" (60%), "life too much to bear" (48%), "instructions regarding practical affairs post-mortem" (36%), "hopelessness/nothing to live for" (21%) and "advice for those left behind" (21%). Notes of suicides with major unipolar depression were more likely than notes of suicides without major unipolar depression to contain the themes "instructions regarding practical affairs post-mortem" (67% versus 19%, p = 0.005) and "hopelessness/nothing to live for" (40% versus 11%, p = 0.049). Notes of suicides with a previous history of deliberate self-harm were less likely than notes of suicides without a history of deliberate self-harm to contain the theme "apology/shame" (58% versus 87%, p = 0.04). Notes of elderly suicides were more likely than non-elderly notes to contain the theme "burden to others" (40% versus 3%, p = 0.03). The fact that three quarters of suicide notes contained the theme "apology/shame" suggests that the deceased may have welcomed alternative solutions for their predicaments. Scrutiny of suicide note themes in the light of previous research findings suggests that cognitive therapy techniques, especially problem solving, may have an important role to play in suicide prevention and that potential major unipolar depressive (possibly less impulsive) suicides, in particular, may provide fertile ground for therapeutic intervention (physical and psychological). Ideally all primary care doctors and mental health professionals working with (potentially) suicidal people should be familiar with basic cognitive therapy techniques, especially problem solving skills training.

  13. A note on photographing otoliths

    African Journals Online (AJOL)

    The sagiu..al otoliths of rlShes have in recent years become importanttuonomic aids. Forthis purpose high quality photographs have become essential to illustrate such fine: structures as the crislae and the colliculi which art often useful in distinguishing between closely related species. The method described bdow proved ...

  14. Improved Detection System Description and New Method for Accurate Calibration of Micro-Channel Plate Based Instruments and Its Use in the Fast Plasma Investigation on NASA's Magnetospheric MultiScale Mission

    Science.gov (United States)

    Gliese, U.; Avanov, L. A.; Barrie, A. C.; Kujawski, J. T.; Mariano, A. J.; Tucker, C. J.; Chornay, D. J.; Cao, N. T.; Gershman, D. J.; Dorelli, J. C.; hide

    2015-01-01

    The Fast Plasma Investigation (FPI) on NASAs Magnetospheric MultiScale (MMS) mission employs 16 Dual Electron Spectrometers (DESs) and 16 Dual Ion Spectrometers (DISs) with 4 of each type on each of 4 spacecraft to enable fast (30 ms for electrons; 150 ms for ions) and spatially differentiated measurements of the full 3D particle velocity distributions. This approach presents a new and challenging aspect to the calibration and operation of these instruments on ground and in flight. The response uniformity, the reliability of their calibration and the approach to handling any temporal evolution of these calibrated characteristics all assume enhanced importance in this application, where we attempt to understand the meaning of particle distributions within the ion and electron diffusion regions of magnetically reconnecting plasmas. Traditionally, the micro-channel plate (MCP) based detection systems for electrostatic particle spectrometers have been calibrated using the plateau curve technique. In this, a fixed detection threshold is set. The detection system count rate is then measured as a function of MCP voltage to determine the MCP voltage that ensures the count rate has reached a constant value independent of further variation in the MCP voltage. This is achieved when most of the MCP pulse height distribution (PHD) is located at higher values (larger pulses) than the detection system discrimination threshold. This method is adequate in single-channel detection systems and in multi-channel detection systems with very low crosstalk between channels. However, in dense multi-channel systems, it can be inadequate. Furthermore, it fails to fully describe the behavior of the detection system and individually characterize each of its fundamental parameters. To improve this situation, we have developed a detailed phenomenological description of the detection system, its behavior and its signal, crosstalk and noise sources. Based on this, we have devised a new detection

  15. Note Taking on Trial: A Legal Application of Note-Taking Research

    Science.gov (United States)

    Kiewra, Kenneth A.

    2016-01-01

    This article is about note taking, but it is not an exhaustive review of note-taking literature. Instead, it portrays the application of note-taking research to an unusual and important area of practice--the law. I was hired to serve as an expert witness on note taking in a legal case that hinged, in part, on the completeness and accuracy of…

  16. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  17. Assessment of junior doctors? admission notes: do they follow what they learn?

    OpenAIRE

    Barnawi, Rashid A.; Ghurab, Abdulaziz M.; Balubaid, Hassan K.; Alfaer, Sultan S.; Hanbazazah, Kamal A.; Bukhari, Mohammed F.; Hamed, Omayma A.; Bakhsh, Talal M.

    2017-01-01

    Objectives To assess the completeness of history-taking and physical-examination notes of junior doctors at King Abdulaziz University Hospital per the approach they learned in medical school. Methods In this retrospective study, we reviewed 860 admission notes written by 269 junior doctors (interns and residents) in an academic tertiary-care medical centre in Jeddah, Saudi Arabia, over a two-month period. Notes were evaluated for completeness using a checklist developed with reference to rele...

  18. Medical subdomain classification of clinical notes using a machine learning-based natural language processing approach

    OpenAIRE

    Weng, Wei-Hung; Wagholikar, Kavishwar B.; McCray, Alexa T.; Szolovits, Peter; Chueh, Henry C.

    2017-01-01

    Background The medical subdomain of a clinical note, such as cardiology or neurology, is useful content-derived metadata for developing machine learning downstream applications. To classify the medical subdomain of a note accurately, we have constructed a machine learning-based natural language processing (NLP) pipeline and developed medical subdomain classifiers based on the content of the note. Methods We constructed the pipeline using the clinical ...

  19. Technical note on drainage systems:design of pipes and detention facilities for rainwater

    OpenAIRE

    Bentzen, Thomas Ruby

    2014-01-01

    This technical note will present simple but widely used methods for the design of drainage systems. The note will primarily deal with surface water (rainwater) which on a satisfactorily way should be transport into the drainage system. Traditional two types of sewer systems exist: A combined system, where rainwater and sewage is transported in the same pipe, and a separate system where the two types of water are transported in individual pipe. This note will only focus on the separate rain/st...

  20. Technical note: development and validation of a method using ultra performance liquid chromatography coupled with tandem mass spectrometry for determination of vitamin B12 concentrations in milk and dairy products.

    Science.gov (United States)

    Zironi, E; Gazzotti, T; Barbarossa, A; Devicienti, C; Scardilli, M; Pagliuca, G

    2013-05-01

    A method using ultra performance liquid chromatography coupled with tandem mass spectrometry was developed to measure cobalamins in naturally enriched raw milk and to evaluate their fate during thermal treatments and along the process of cheese making. After addition of methotrexate as internal standard, samples were submitted to heat treatment in the presence of cyanide, which converts all the less-stable cobalamins into cyanocobalamin; then, purification was performed by a solid-phase extraction step. Reverse-phase ultra performance liquid chromatography separation coupled with tandem mass spectrometry provided a fast and reliable determination. Mass spectrometric analysis was carried out in multiple reaction monitoring mode. The monitored transitions were m/z 678.36 → 147.10 and 678.36 → 359.30 for vitamin B12 and m/z 455.22 → 175.13 and 455.22 → 308.22 for methotrexate (internal standard). The limit of quantification was 2 ng/g. The method showed good linearity from 2 to 20 ng/g (R(2) ≥ 0.98) and intra- and interday precisions were always less than 19%. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.