WorldWideScience

Sample records for methods current state

  1. Effectiveness of the current method of calculating member states' contributions

    CERN Document Server

    2002-01-01

    At its Two-hundred and eighty-sixth Meeting of 19 September 2001, the Finance Committee requested the Management to re-assess the effectiveness of the current method of forecasting Net National Income (NNI) for the purposes of calculating the Member States' contributions by comparing the results of the current weighted average method with a method based on a simple arithmetic average. The Finance Committee is invited to take note of this information.

  2. Current state and development trends of inspections of steam generator tubes by eddy currents method

    International Nuclear Information System (INIS)

    Kubis, S.; Herman, M.

    1988-01-01

    The requirements are presented for steam generator tube testing and the factors are discussed affecting the accuracy of measurement by the eddy currents method. The individual types of the eddy currents method are described, such as the single-frequency method, the multi-frequency method and the pulse eddy currents method. The demands are summed up on manipulator systems whose design is adapted to the steam generator configuration conditions. (E.S.). 5 figs., 16 possu

  3. Effusion method at age 69: current state of the art

    International Nuclear Information System (INIS)

    Cater, E.D.

    1979-01-01

    Historical notes are presented tracing the development of the effusion methods along with some fundamental equations to be used later. Theoretical and experimental limitations of the method, and of each variant of the effusion method are cited. How these problems have been dealt with and where our understanding of them now lies are discussed, and estimates of the accuracy with which derived results can be ascribed are given. Finally, some newer techniques are mentioned which give some of the same results that have traditionally been obtained by effusion studies, try to place them in perspective, and perhaps suggest some future directions for effusion studies

  4. Fractal-Based Methods and Inverse Problems for Differential Equations: Current State of the Art

    Directory of Open Access Journals (Sweden)

    Herb E. Kunze

    2014-01-01

    Full Text Available We illustrate, in this short survey, the current state of the art of fractal-based techniques and their application to the solution of inverse problems for ordinary and partial differential equations. We review several methods based on the Collage Theorem and its extensions. We also discuss two innovative applications: the first one is related to a vibrating string model while the second one considers a collage-based approach for solving inverse problems for partial differential equations on a perforated domain.

  5. CURRENT STATE ANALYSIS OF AUTOMATIC BLOCK SYSTEM DEVICES, METHODS OF ITS SERVICE AND MONITORING

    Directory of Open Access Journals (Sweden)

    A. M. Beznarytnyy

    2014-01-01

    Full Text Available Purpose. Development of formalized description of automatic block system of numerical code based on the analysis of characteristic failures of automatic block system and procedure of its maintenance. Methodology. For this research a theoretical and analytical methods have been used. Findings. Typical failures of the automatic block systems were analyzed, as well as basic reasons of failure occur were found out. It was determined that majority of failures occurs due to defects of the maintenance system. Advantages and disadvantages of the current service technology of automatic block system were analyzed. Works that can be automatized by means of technical diagnostics were found out. Formal description of the numerical code of automatic block system as a graph in the state space of the system was carried out. Originality. The state graph of the numerical code of automatic block system that takes into account gradual transition from the serviceable condition to the loss of efficiency was offered. That allows selecting diagnostic information according to attributes and increasing the effectiveness of recovery operations in the case of a malfunction. Practical value. The obtained results of analysis and proposed the state graph can be used as the basis for the development of new means of diagnosing devices for automatic block system, which in turn will improve the efficiency and service of automatic block system devices in general.

  6. Engineering Ethics Education : Its Necessity, Objectives, Methods, Current State, and Challenges

    Science.gov (United States)

    Fudano, Jun

    The importance of engineering ethics education has become widely recognized in the industrialized countries including Japan. This paper examines the background against which engineering ethics education is required, and reviews its objectives, methods, and challenges, as well as its current state. In pointing out important issues associated with the apparent acceptance and quantitative development of ethics education, especially after the establishment of the Japan Accreditation Board for Engineering Education in 1999, the author stresses that the most serious problem is the lack of common understanding on the objectives of engineering ethics education. As a strategy to improve the situation, the so-called “Ethics-across-the-Curriculum” approach is introduced. The author also claims that business/organization ethics which is consistent with engineering ethics should be promoted in Japan.

  7. System and method for generating steady state confining current for a toroidal plasma fusion reactor

    International Nuclear Information System (INIS)

    Fisch, N.J.

    1981-01-01

    A system for generating steady state confining current for a toroidal plasma fusion reactor providing steady-state generation of the thermonuclear power. A dense, hot toroidal plasma is initially prepared with a confining magnetic field with toroidal and poloidal components. Continuous wave rf energy is injected into said plasma to establish a spectrum of traveling waves in the plasma, where the traveling waves have momentum components substantially either all parallel, or all anti-parallel to the confining magnetic field. The injected rf energy is phased to couple to said traveling waves with both a phase velocity component and a wave momentum component in the direction of the plasma traveling wave components. The injected rf energy has a predetermined spectrum selected so that said traveling waves couple to plasma electrons having velocities in a predetermined range delta . The velocities in the range are substantially greater than the thermal electron velocity of the plasma. In addition, the range is sufficiently broad to produce a raised plateau having width delta in the plasma electron velocity distribution so that the plateau electrons provide steady-state current to generate a poloidal magnetic field component sufficient for confining the plasma. In steady state operation of the fusion reactor, the fusion power density in the plasma exceeds the power dissipated in the plasma

  8. System and method for generating steady state confining current for a toroidal plasma fusion reactor

    International Nuclear Information System (INIS)

    Bers, A.

    1981-01-01

    A system for generating steady state confining current for a toroidal plasma fusion reactor providing steady-state generation of the thermonuclear power. A dense, hot toroidal plasma is initially prepared with a confining magnetic field with toroidal and poloidal components. Continuous wave rf energy is injected into said plasma to estalish a spectrum of traveling waves in the plasma, where the traveling waves have momentum components substantially either all parallel, or all anti-parallel to the confining magnetic field. The injected rf energy is phased to couple to said traveling waves with both a phase velocity component and a wave momentum component in the direction of the plasma traveling wave components. The injected rf energy has a predetermined spectrum selected so that said traveling waves couple to plasma electrons having velocities in a predetermined range delta . The velocities in the range are substantially greater than the thermal electron velocity of the plasma. In addition, the range is sufficiently broad to produce a raised plateau having width delta in the plasma electron velocity distribution so that the plateau electrons provide steady-state current to generate a poloidal magnetic field component sufficient for confining the plasma. In steady state operation of the fusion reactor, the fusion power density in the plasma exceeds the power dissipated inthe plasma

  9. A contact-less method to evaluate the state of charge of nickel batteries using Foucault's eddy currents

    Science.gov (United States)

    Mancier, V.; Metrot, A.; Willmann, P.

    A nickel hydroxide electrode and a commercial battery have been studied by a new and contact-less impedance method, based on Foucault's eddy currents, with the aim of determining their state of charge. Four different current line distributions have been employed and the impedance versus time graphs obtained show a linear variation of this impedance during charge and discharge for all configurations. This new method allows the determination of the state of charge and, furthermore some "artifacts" obvious on these graphs may be useful to detect a deterioration of the studied material.

  10. A review of the current state of antimicrobial susceptibility test methods for Brachyspira.

    Science.gov (United States)

    Kulathunga, D G R S; Rubin, J E

    2017-06-01

    The re-emergence of swine dysentery (Brachyspira-associated muco-haemorrhagic colitis) since the late 2000s has illuminated diagnostic challenges associated with this genus. The methods used to detect, identify, and characterize Brachyspira from clinical samples have not been standardized, and laboratories frequently rely heavily on in-house techniques. Particularly concerning is the lack of standardized methods for determining and interpreting the antimicrobial susceptibility of Brachyspira spp. The integration of laboratory data into a treatment plan is a critical component of prudent antimicrobial usage. Therefore, the lack of standardized methods is an important limitation to the evidence-based use of antimicrobials. This review will focus on describing the methodological limitations and inconsistencies between current susceptibility testing schemes employed for Brachyspira, provide an overview of what we do know about the susceptibility of these organisms, and suggest future directions to improve and standardize diagnostic strategies.

  11. A Method to Simultaneously Detect the Current Sensor Fault and Estimate the State of Energy for Batteries in Electric Vehicles.

    Science.gov (United States)

    Xu, Jun; Wang, Jing; Li, Shiying; Cao, Binggang

    2016-08-19

    Recently, State of energy (SOE) has become one of the most fundamental parameters for battery management systems in electric vehicles. However, current information is critical in SOE estimation and current sensor is usually utilized to obtain the latest current information. However, if the current sensor fails, the SOE estimation may be confronted with large error. Therefore, this paper attempts to make the following contributions: Current sensor fault detection and SOE estimation method is realized simultaneously. Through using the proportional integral observer (PIO) based method, the current sensor fault could be accurately estimated. By taking advantage of the accurate estimated current sensor fault, the influence caused by the current sensor fault can be eliminated and compensated. As a result, the results of the SOE estimation will be influenced little by the fault. In addition, the simulation and experimental workbench is established to verify the proposed method. The results indicate that the current sensor fault can be estimated accurately. Simultaneously, the SOE can also be estimated accurately and the estimation error is influenced little by the fault. The maximum SOE estimation error is less than 2%, even though the large current error caused by the current sensor fault still exists.

  12. Determination of mycotoxins in foods: current state of analytical methods and limitations.

    Science.gov (United States)

    Köppen, Robert; Koch, Matthias; Siegel, David; Merkel, Stefan; Maul, Ronald; Nehls, Irene

    2010-05-01

    Mycotoxins are natural contaminants produced by a range of fungal species. Their common occurrence in food and feed poses a threat to the health of humans and animals. This threat is caused either by the direct contamination of agricultural commodities or by a "carry-over" of mycotoxins and their metabolites into animal tissues, milk, and eggs after feeding of contaminated hay or corn. As a consequence of their diverse chemical structures and varying physical properties, mycotoxins exhibit a wide range of biological effects. Individual mycotoxins can be genotoxic, mutagenic, carcinogenic, teratogenic, and oestrogenic. To protect consumer health and to reduce economic losses, surveillance and control of mycotoxins in food and feed has become a major objective for producers, regulatory authorities and researchers worldwide. However, the variety of chemical structures makes it impossible to use one single technique for mycotoxin analysis. Hence, a vast number of analytical methods has been developed and validated. The heterogeneity of food matrices combined with the demand for a fast, simultaneous and accurate determination of multiple mycotoxins creates enormous challenges for routine analysis. The most crucial issues will be discussed in this review. These are (1) the collection of representative samples, (2) the performance of classical and emerging analytical methods based on chromatographic or immunochemical techniques, (3) the validation of official methods for enforcement, and (4) the limitations and future prospects of the current methods.

  13. Sub-bandgap photonic base current method for characterization of interface states at heterointerfaces in heterojunction bipolar transistors

    International Nuclear Information System (INIS)

    Shin, H. T.; Kim, K. H.; Kim, K. S.

    2004-01-01

    In this paper, we propose a novel photonic base current analysis method to characterize the interface states in heterojunction bipolar transistors (HBTs) by using the photonic I-V characteristics under sub-bandgap photonic excitation. For the photonic current-voltage characterization of HBTs, an optical source with a photon energy less than the bandgap energy of Al 0.3 Ga 0.7 As and GaAs (E ph = 0.95 eV g,AlGaAs = 1.79 eV, E g,GaAs = 1.45 eV) is employed for the characterization of the interface states distributed in the photo-responsive energy band (E C - 0.95 ≤ E it ≤ E C ) in emitter-base heterojunction at HBTs. The proposed novel method, which is applied to bipolar junction transistors for the first time, is simple, and an accurate analysis of interface traps in HBTs is possible. By using the photonic base-current and the dark-base-current, we qualitatively analyze the interface trap at the Al 0.3 Ga 0.7 As/GaAs heterojunction interface in HBTs.

  14. Determination of vitamin C in foods: current state of method validation.

    Science.gov (United States)

    Spínola, Vítor; Llorent-Martínez, Eulogio J; Castilho, Paula C

    2014-11-21

    Vitamin C is one of the most important vitamins, so reliable information about its content in foodstuffs is a concern to both consumers and quality control agencies. However, the heterogeneity of food matrixes and the potential degradation of this vitamin during its analysis create enormous challenges. This review addresses the development and validation of high-performance liquid chromatography methods for vitamin C analysis in food commodities, during the period 2000-2014. The main characteristics of vitamin C are mentioned, along with the strategies adopted by most authors during sample preparation (freezing and acidification) to avoid vitamin oxidation. After that, the advantages and handicaps of different analytical methods are discussed. Finally, the main aspects concerning method validation for vitamin C analysis are critically discussed. Parameters such as selectivity, linearity, limit of quantification, and accuracy were studied by most authors. Recovery experiments during accuracy evaluation were in general satisfactory, with usual values between 81 and 109%. However, few methods considered vitamin C stability during the analytical process, and the study of the precision was not always clear or complete. Potential future improvements regarding proper method validation are indicated to conclude this review. Copyright © 2014. Published by Elsevier B.V.

  15. CURRENT STATE AND EVOLUTION PERSPECTIVES FOR MANAGEMENT ACCOUNTING IN THE ENERGY SECTOR BY IMPLEMENTING THE ABC METHOD

    Directory of Open Access Journals (Sweden)

    Rof Letitia Maria

    2011-07-01

    Full Text Available Based on a controversial issue, namely determining and controlling costs in the energy sector, the present study falls within the scope of management accounting and control. This scientific approach was initiated as a result of personal research concerns in the area of accounting, starting from the need to know and quantify costs in a sector of the economy that is less exploited. The main objective of this scientific approach is to address the evolution of the energy sector in a national and international context, in terms of economy and finances, with the aim to underline the need to organize and conduct management accounting in this sector. We will present a few particularities of the energy system, the current status of implementation of a medium and long term strategy aimed at developing the energy sector, as well as the need to adopt modern costing methods in this sector, which ensure operative cost control and performance growth of the entities that operate in this sector. Information on the reviewed topic was conducted by studying the national and international literature in the field, by analyzing the associated legislation, by consulting specialized web-sites and various articles in the database. The main research methods used in this scientific approach were analysis and synthesis, and qualitative research was the type of used research. The results of the research will materialize in providing the necessary conditions for designing an econometric model for implementing the ABC method, the conceptual and ideological delimitation of the ABC method, the deepening of the positive and negative aspects that the implementation of the Activity Based Costing involves. The major implication for the researched field is ensuring success for the implementation of a modern costing method in the energy sector, underlining the shortcomings of the traditional costing methods. The added value of the paper consists in conducting a rigorous study of the

  16. Endoscopic ultrasound for the characterization and staging of rectal cancer. Current state of the method. Technological advances and perspectives.

    Science.gov (United States)

    Gersak, Mariana M; Badea, Radu; Graur, Florin; Hajja, Nadim Al; Furcea, Luminita; Dudea, Sorin M

    2015-06-01

    Endoscopic ultrasound is the most accurate type of examination for the assessment of rectal tumors. Over the years, the method has advanced from gray-scale examination to intravenous contrast media administration and to different types of elastography. The multimodal approach of tumors (transrectal, transvaginal) is adapted to each case. 3D ultrasound is useful for spatial representation and precise measurement of tumor formations, using CT/MR image reconstruction; color elastography is useful for tumor characterization and staging; endoscopic ultrasound using intravenous contrast agents can help study the amount of contrast agent targeted at the level of the tumor formations and contrast wash-in/wash-out time, based on the curves displayed on the device. The transvaginal approach often allows better visualization of the tumor than the transrectal approach. Performing the procedure with the rectal ampulla distended with contrast agent may be seen as an optimization of the examination methodology. All these aspects are additional methods for gray-scale endoscopic ultrasound, capable of increasing diagnostic accuracy. This paper aims at reviewing the progress of transrectal and transvaginal ultrasound, generically called endoscopic ultrasound, for rectal tumor diagnosis and staging, with emphasis on the current state of the method and its development trends.

  17. Radiopharmaceuticals - current state and trends

    International Nuclear Information System (INIS)

    Muenze, R.

    1981-07-01

    The current state as well as the tendencies of modern radiopharmaceutical development and application is reviewed. After an evaluation of the fundamental preconditions of decay characteristics and pharmaceutical properties the problems concerning sup(99m)Tc-radiopharmaceuticals, metabolizable compounds and the use of specific biological interactions are discussed. (author)

  18. Assessment of current state of the art in modeling techniques and analysis methods for large space structures

    Science.gov (United States)

    Noor, A. K.

    1983-01-01

    Advances in continuum modeling, progress in reduction methods, and analysis and modeling needs for large space structures are covered with specific attention given to repetitive lattice trusses. As far as continuum modeling is concerned, an effective and verified analysis capability exists for linear thermoelastic stress, birfurcation buckling, and free vibration problems of repetitive lattices. However, application of continuum modeling to nonlinear analysis needs more development. Reduction methods are very effective for bifurcation buckling and static (steady-state) nonlinear analysis. However, more work is needed to realize their full potential for nonlinear dynamic and time-dependent problems. As far as analysis and modeling needs are concerned, three areas are identified: loads determination, modeling and nonclassical behavior characteristics, and computational algorithms. The impact of new advances in computer hardware, software, integrated analysis, CAD/CAM stems, and materials technology is also discussed.

  19. Method for critical current testing

    International Nuclear Information System (INIS)

    Siddall, M.B.; Smathers, D.B.

    1989-01-01

    Superconducting critical current testing software was developed with four important features not feasible with analog test equipment. First, quasi-steady-state sample current conditions are achieved by incrementing sample current, followed by holding some milliseconds until the transient voltage decays before voltage sampling. Then the self-field correction from a helically wound sample is computed and subtracted from each sampled field reading. A copper wire inductively wound shunt which is used for quench protection has a constant measured resistance from which the shunt leakage current is computed and subtracted from the sample current by measuring the shunt voltage after each sample current reading. Finally, the critical current is recomputed from a least squares curve fit to the power law: E=A*In when the correlation coefficient for the fit is high enough to ensure a better result than the raw datum. Comparison with NBS Standard Reference Material (NbTi) and current round robin Nb/sub 3/Sn testing is examined

  20. Current State of Craniofacial Prosthetic Rehabilitation

    NARCIS (Netherlands)

    Ariani, Nina; Visser, Anita; van Oort, Robert P.; Kusdhany, Lindawati; Rahardjo, Tri Budi W.; Krom, Bastiaan P.; van der Mei, Henny C.; Vissink, Arjan

    2013-01-01

    Purpose: This study aimed to review the current state of the techniques and materials used to rehabilitate maxillofacial defects. Materials and Methods: The MEDLINE and EMBASE databases were searched for articles pertinent to maxillofacial prostheses published from January 1990 to July 2011. The

  1. The current state of development works for manufacturing and methods of controlling the nuclear fuel for NPPs of Ukraine

    International Nuclear Information System (INIS)

    Odeychuk, N.P.; Levenets, V.V.; Krasnorutsky, V.S.

    2000-01-01

    The paper presents the results of NSC KIPT researches on manufacturing the fuel microspheres and pellets based on uranium dioxide. The data on fuel characteristics for different manufacturing stages are given. The problems of improving the fuel quality with changing the structure characteristics of pellets are considered. Demonstrated is the hardware for pellet controlling and presented are the new ways for developing the methods of controlling the nuclear fuel: X-ray fluorescent analysis; complex of nuclear-physical methods on the base of accelerators; laser-excitation energy-mass-spectrometer. (author)

  2. A comparison of current Naval Facilities Engineering Command field office staffing methods, state staffing methods and the construction industry institutes owner contractor work structure

    OpenAIRE

    Monreal, Michael

    2001-01-01

    CIVINS (Civilian Institutions) Thesis document This report was generated by accepting a report topic contained in a list of topics on the Civil Engineer Corps Graduate School Information web page. The topic request and description is noted as follows: Topic. How to Measure Staffing Requirements in ROICC offices and Other Acquisition Functions with a description. Description: We base current staffing requirements on history and only adjust from what we have used in the past years. It is sus...

  3. Current state of Czech andragogy

    Directory of Open Access Journals (Sweden)

    Jan Průcha

    Full Text Available The survey article should serve as an information for educationists about thesituation of andragogy (theory and research of adult education in the Czech Republic.First, a brief explanation is presented based on definitions of andragogy and its mainthemes. The second part describes centres of andragogy in five Czech universities.Later on, an overview of main publications of Czech andragogy is given with respectof their relevance for educationists. Finally, some weak features of Czech andragogy arementioned, especially a lack of empirical research of adult education and learning. Thisis just an area in which some methods of educational research can be usefully applied.

  4. [Male contraception - the current state of knowledge].

    Science.gov (United States)

    Zdrojewicz, Zygmynt; Kasperska, Karolina; Lewandowska, Marta

    2016-08-01

    Contraception is important from a health, psychological and socioeconomic point of view. Due to the fact that male-based contraceptive methods are mostly represented by condoms and vasectomy, researchers are working on the new solutions, which could let the men be more involved in a conscious family planning. In this review we will present the current state of knowledge on this subject. There is a lot going on in the field of hormonal contraception. Studies including testosterone, progestins, synthetic androgens and other derivatives are on a different stages of clinical trials and mostly demonstrate high efficacy rates. Recent discovers of Izumo and Juno proteins, essential for the fertilization process, give hope for an easily reversible, non-hormonal method. Researchers are also trying to interfere with the process of spermatogenesis using BRDT inhibitor - JQ1, or neutralize the sperm by injecting styrene maleic anhydride (SMA) into the lumen of the vas deferens. The other studies explore processes involved in proper sperm motility. A vaccine which induces an immune response to the reproductive system is also an interesting method. The latest research use ultrasound waves and mechanical device which blocks the patency of vas deferens. The aim of the study current state of knowledge male contraception. © 2016 MEDPRESS.

  5. RETAIL BANKING BUSINESS: CURRENT STATE ANDSPECIFIC FEATURES

    Directory of Open Access Journals (Sweden)

    Гузель Рефкадовна Фаизова

    2013-04-01

    Full Text Available The role and importance of the retail banking business in the banking sector continueto grow. The current state of the retail banking business is considered and specific features of this area in the face of growing demand for banking products and services by the public and interest from lending institutions are identified by the article.Purpose: Research of current state of retail banking business and detection specific features of this area.Methodology: In the process of analysis and researchof the question the methods of economical and statistical analysis, methods of comparison and generalizationwereused.Results: The conclusion is that interest in the retail banking business continues to grow.There were revealed the role and the importance of standardized service processes and standardized products and services delivering as one of the main line of development in the segment of retail business.DOI: http://dx.doi.org/10.12731/2218-7405-2013-3-2

  6. Current State of Dental Education: Executive Summary.

    Science.gov (United States)

    Formicola, Allan J

    2017-08-01

    This executive summary for Section 1 of the "Advancing Dental Education in the 21 st Century" project provides a composite picture of information from 12 background articles on the current state of dental education in the United States. The summary includes the following topics: the current status of the dental curriculum, the implications of student debt and dental school finances, the expansion of enrollment, student diversity, pre- and postdoctoral education, safety net status of dental school clinics, and trends in faculty.

  7. State Emergency Department Opioid Guidelines: Current Status.

    Science.gov (United States)

    Broida, Robert I; Gronowski, Tanner; Kalnow, Andrew F; Little, Andrew G; Lloyd, Christopher M

    2017-04-01

    The purpose of this study was to evaluate and categorize current state-sponsored opioid guidelines for the practice of emergency medicine (EM). We conducted a comprehensive search of EM-specific opioid prescribing guidelines and/or policies in each state to determine current state involvement in EM opioid prescribing, as well as to evaluate some of the specifics of each guideline or policy. The search was conducted using an online query and a follow-up email request to each state chapter of ACEP. We found that 17 states had emergency department-specific guidelines. We further organized the guidelines into four categories: limiting prescriptions for opioids with 67 total recommendations; preventing/diverting abuse with 56 total recommendations; addiction-related guidelines with 29 total recommendations; and a community resources section with 24 total recommendations. Our results showed that current state guidelines focus on providers limiting opioid pain prescriptions and vetting patients for possible abuse/diversion. This study highlights the 17 states that have addressed opioid prescribing guidelines and categorizes their efforts to date. It is hoped that this study will provide the basis for similar efforts in other states.

  8. Method for measuring the resistive transition and critical current in superconductors using pulsed current

    International Nuclear Information System (INIS)

    McGinnis, W.C.; Jones, T.E.

    1993-01-01

    A method is described for measuring the intragranular critical current of a granular superconductive material, comprising the steps of: conducting a substantially rectangular electronic pulse through said material so as to conduct a current through said material such that when said intragranular critical current of said material is exceeded, any grains present in said material are in a superconducting state when said current is less than said intragranular critical current, said material having a critical temperature; measuring said current through said material while conducting said pulse; measuring a voltage difference across said material while conducting said pulse; and determining said intragranular critical current through said material by varying said current to discern a current level at which an electrical resistance of said material increases to that of a non-superconducting state as the grains of said material transition from said superconducting to said non-superconducting state

  9. Current status of methods for shielding analysis

    International Nuclear Information System (INIS)

    Engle, W.W.

    1980-01-01

    Current methods used in shielding analysis and recent improvements in those methods are discussed. The status of methods development is discussed based on needs cited at the 1977 International Conference on Reactor Shielding. Additional areas where methods development is needed are discussed

  10. [Current state of competence assessment in nursing].

    Science.gov (United States)

    Darmann-Finck, Ingrid; Reuschenbach, Bernd

    2013-01-01

    Competency measurement is central to the optimisation of outcome oriented educational processes in nursing, similar to the concept of evidence based practice. The classification of measurement tools provides the basis for describing the current state of research and development in relation to competence measurement in nursing science, and any gaps are identified. The article concludes with questioning the importance of outcome oriented quality orientation in order to achieve an increase in quality during training. Further methodological developments and qualitative studies are needed to examine the context specific processes of interaction and learning, beyond competence diagnostics. Copyright © 2012. Published by Elsevier GmbH.

  11. Method and apparatus to trigger superconductors in current limiting devices

    Science.gov (United States)

    Yuan, Xing; Hazelton, Drew Willard; Walker, Michael Stephen

    2004-10-26

    A method and apparatus for magnetically triggering a superconductor in a superconducting fault current limiter to transition from a superconducting state to a resistive state. The triggering is achieved by employing current-carrying trigger coil or foil on either or both the inner diameter and outer diameter of a superconductor. The current-carrying coil or foil generates a magnetic field with sufficient strength and the superconductor is disposed within essentially uniform magnetic field region. For superconductor in a tubular-configured form, an additional magnetic field can be generated by placing current-carrying wire or foil inside the tube and along the center axial line.

  12. Stated preference methods using R

    CERN Document Server

    Aizaki, Hideo; Sato, Kazuo

    2014-01-01

    Stated Preference Methods Using R explains how to use stated preference (SP) methods, which are a family of survey methods, to measure people's preferences based on decision making in hypothetical choice situations. Along with giving introductory explanations of the methods, the book collates information on existing R functions and packages as well as those prepared by the authors. It focuses on core SP methods, including contingent valuation (CV), discrete choice experiments (DCEs), and best-worst scaling (BWS). Several example data sets illustrate empirical applications of each method with R

  13. Current state of craniofacial prosthetic rehabilitation.

    Science.gov (United States)

    Ariani, Nina; Visser, Anita; van Oort, Robert P; Kusdhany, Lindawati; Rahardjo, Tri Budi W; Krom, Bastiaan P; van der Mei, Henry C; Vissink, Arjan

    2013-01-01

    This study aimed to review the current state of the techniques and materials used to rehabilitate maxillofacial defects. The MEDLINE and EMBASE databases were searched for articles pertinent to maxillofacial prostheses published from January 1990 to July 2011. The main clinical stages were the subject of analysis. A multidisciplinary approach is preferred when rehabilitating maxillofacial defects. Surgical reconstruction can be used for smaller defects, but larger defects require a prosthesis to achieve an esthetic rehabilitation. Implant retained prostheses are preferred over adhesive prostheses. Silicone elastomer is currently the best material available for maxillofacial prostheses; however, longevity and discoloration, which are greatly influenced by ultraviolet radiation, microorganisms, and environmental factors, remain significant problems. In the near future, the widespread availability and cost effectiveness of digital systems may improve the workflow and outcomes of facial prostheses. Patients report high satisfaction with their prostheses despite some areas that still need improvement. Maxillofacial prostheses are a reliable treatment option to restore maxillofacial defects and improve quality of life. Significant progress has been made in the application of implants for retention and digital technology for designing surgical guides, suprastructures, and craniofacial prostheses. Further improvements are necessary to enhance longevity of prostheses.

  14. Multi-frequency eddy current testing method

    International Nuclear Information System (INIS)

    Levy, R.; Gallet, G.

    1980-01-01

    Monitoring by multi-frequency eddy currents has been used since 1975 in French nuclear stations; this method applies perfectly to examinations in non-irradiated surroundings. The restrictions connected with operations in controlled zones (radioactivity) have led to the development of a delayed analysis device which in no way changes the principle of the method, but allows greater flexibility of use by reducing the volume of equipment needed and by limiting the intervention of personnel to a strict minimum [fr

  15. On the Current Thermal State of Mars.

    Science.gov (United States)

    Grott, M.; Breuer, D.

    2008-09-01

    Introduction: The current thermal state of Mars is a fundamental unknown in Mars science. Although is has a huge influence on the planet's current geodynamic activity and controls the possibility for basal melting at the polar caps [1], constraints on this quantities are very scarce. This situation has lately been improved by the study of lithospheric deformation at the north polar cap [2] which constrained the current Martian elastic lithosphere thickness Te, an indirect measure of the temperatures in the planetary interior. Using radar sounding data obtained bySHARAD, the shallow radar onboard the Mars Reconnaissance Orbiter, [2] found that the current Martian lithosphere is extremely stiff and Te is larger than 300 km today. This is surprising as this value is almost twice as large as previously estimated from theoretical considerations and flexure studies [3][1]. In order to be consistent with the planets thermal evolution, [2] argue that the amount of radioactive elements in the Martian interior needs to be subchondritic. This appears to be problematic as geochemical analysis of the SNC meteorites implies higher concentrations of radioactive elements [4]. Furthermore, if the concentration of heat producing elements is indeed reduced, the resulting low interior temperatures will inhibit partial mantle melting and magmatism. However, geological evidence suggests that Mars has been volcanically active in the recent past [5]. In order to address these inconsistencies, we reinvestigate the thermal evolution of Mars and examine its current thermal state for a wide range of initial condition using the current elastic thickness Te and the potential for partial mantle melting to constrain our models. Modeling: We investigate the thermal evolution of Mars by solving the energy balance equations for the core and mantle, treating the mantle energy transport by parametrized convection models. This is done using scaling laws for stagnant lid convection and our model is

  16. Current management of obsessive and phobic states

    Directory of Open Access Journals (Sweden)

    Goljevscek S

    2011-09-01

    Full Text Available Serena Goljevscek1, Livia A Carvalho21Psychiatric Clinic, University of Udine, Udine, Italy; 2Health Science Research Centre, Department of Life Sciences, Roehampton University, London, UKAbstract: Obsessional states show an average point prevalence of 1%–3% and a lifetime prevalence of 2%–2.5%. Most treatment-seeking patients with obsessions continue to experience significant symptoms after 2 years of prospective follow-up. A significant burden of impairment, distress, and comorbidity characterize the course of the illness, leading to an increased need for a better understanding of the nature and management of this condition. This review aims to give a representation of the current pharmacological and psychotherapeutic strategies used in the treatment of obsessive-compulsive disorder. Antidepressants (clomipramine and selective serotonin reuptake inhibitors are generally the first-line choice used to handle obsessional states, showing good response rates and long-term positive outcomes. About 40% of patients fail to respond to selective serotonin reuptake inhibitors. So far, additional pharmacological treatment strategies have been shown to be effective, ie, administration of high doses of selective serotonin reuptake inhibitors, as well as combinations of different drugs, such as dopamine antagonists, are considered efficacious and well tolerated strategies in terms of symptom remission and side effects. Psychotherapy also plays an important role in the management of obsessive-compulsive disorder, being effective for a wide range of symptoms, and many studies have assessed its long-term efficacy, especially when added to appropriate pharmacotherapy. In this paper, we also give a description of the clinical and psychological features likely to characterize patients refractory to treatment for this illness, with the aim of highlighting the need for greater attention to more patient-oriented management of the disease.Keywords: obsessive

  17. Computational methods in calculating superconducting current problems

    Science.gov (United States)

    Brown, David John, II

    Various computational problems in treating superconducting currents are examined. First, field inversion in spatial Fourier transform space is reviewed to obtain both one-dimensional transport currents flowing down a long thin tape, and a localized two-dimensional current. The problems associated with spatial high-frequency noise, created by finite resolution and experimental equipment, are presented, and resolved with a smooth Gaussian cutoff in spatial frequency space. Convergence of the Green's functions for the one-dimensional transport current densities is discussed, and particular attention is devoted to the negative effects of performing discrete Fourier transforms alone on fields asymptotically dropping like 1/r. Results of imaging simulated current densities are favorably compared to the original distributions after the resulting magnetic fields undergo the imaging procedure. The behavior of high-frequency spatial noise, and the behavior of the fields with a 1/r asymptote in the imaging procedure in our simulations is analyzed, and compared to the treatment of these phenomena in the published literature. Next, we examine calculation of Mathieu and spheroidal wave functions, solutions to the wave equation in elliptical cylindrical and oblate and prolate spheroidal coordinates, respectively. These functions are also solutions to Schrodinger's equations with certain potential wells, and are useful in solving time-varying superconducting problems. The Mathieu functions are Fourier expanded, and the spheroidal functions expanded in associated Legendre polynomials to convert the defining differential equations to recursion relations. The infinite number of linear recursion equations is converted to an infinite matrix, multiplied by a vector of expansion coefficients, thus becoming an eigenvalue problem. The eigenvalue problem is solved with root solvers, and the eigenvector problem is solved using a Jacobi-type iteration method, after preconditioning the

  18. The Current State of Music Therapy Theory?

    DEFF Research Database (Denmark)

    Bonde, Lars Ole

    2015-01-01

    An essay on themes from Ken Aigen (2014): "The Study of Music Therapy. Current Issues and Concepts"......An essay on themes from Ken Aigen (2014): "The Study of Music Therapy. Current Issues and Concepts"...

  19. The current state of Bayesian methods in medical product development: survey results and recommendations from the DIA Bayesian Scientific Working Group.

    Science.gov (United States)

    Natanegara, Fanni; Neuenschwander, Beat; Seaman, John W; Kinnersley, Nelson; Heilmann, Cory R; Ohlssen, David; Rochester, George

    2014-01-01

    Bayesian applications in medical product development have recently gained popularity. Despite many advances in Bayesian methodology and computations, increase in application across the various areas of medical product development has been modest. The DIA Bayesian Scientific Working Group (BSWG), which includes representatives from industry, regulatory agencies, and academia, has adopted the vision to ensure Bayesian methods are well understood, accepted more broadly, and appropriately utilized to improve decision making and enhance patient outcomes. As Bayesian applications in medical product development are wide ranging, several sub-teams were formed to focus on various topics such as patient safety, non-inferiority, prior specification, comparative effectiveness, joint modeling, program-wide decision making, analytical tools, and education. The focus of this paper is on the recent effort of the BSWG Education sub-team to administer a Bayesian survey to statisticians across 17 organizations involved in medical product development. We summarize results of this survey, from which we provide recommendations on how to accelerate progress in Bayesian applications throughout medical product development. The survey results support findings from the literature and provide additional insight on regulatory acceptance of Bayesian methods and information on the need for a Bayesian infrastructure within an organization. The survey findings support the claim that only modest progress in areas of education and implementation has been made recently, despite substantial progress in Bayesian statistical research and software availability. Copyright © 2013 John Wiley & Sons, Ltd.

  20. The United States and Europe: Current Issues

    National Research Council Canada - National Science Library

    Archick, Kristin; Morelli, Vince L

    2006-01-01

    The United States and Europe share a long and intertwined history. Both sides of the Atlantic face a common set of international concerns, have few other comparable partners, and share a deep economic relationship...

  1. A Short-Current Control Method for Constant Frequency Current-Fed Wireless Power Transfer Systems

    Directory of Open Access Journals (Sweden)

    Yanling Li

    2017-04-01

    Full Text Available Frequency drift is a serious problem in Current-Fed Wireless Power Transfer (WPT systems. When the operating frequency is drifting from the inherent Zero Voltage Switching (ZVS frequency of resonant network, large short currents will appear and damage the switches. In this paper, an inductance-dampening method is proposed to inhibit short currents and achieve constant-frequency operation. By adding a small auxiliary series inductance in the primary resonant network, short currents are greatly attenuated to a safe level. The operation principle and steady-state analysis of the system are provided. An overlapping time self-regulating circuit is designed to guarantee ZVS running. The range of auxiliary inductances is discussed and its critical value is calculated exactly. The design methodology is described and a design example is presented. Finally, a prototype is built and the experimental results verify the proposed method.

  2. [Osteoporosis: Current state of the art].

    Science.gov (United States)

    Verbovoy, A F; Pashentseva, A V; Sharonova, L A

    As of now, osteoporosis (OP) is one of the most important sociomedical problems because of its high prevalence and resultant disability, as well as significant mortality attributable to complications. The current strategy for providing care for patients of OP is its early diagnosis, by determining the high risk of fractures, and early pathogenetic treatment. The article gives an update on the epidemiology, risk factors, diagnosis, and treatment of OP.

  3. Digital mammography: current state and future aspects

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, U.; Baum, F. [Womens Health Care Center Goettingen, Diagnostisches Brustzentrum Goettingen, Goettingen (Germany); Hermann, K.P. [Georg-August-Universitaet Goettingen, Abteilung Diagnostische Radiologie, Goettingen (Germany)

    2006-01-01

    The introduction of digital technique in mammography has been the last step in completing the process of digitalization in diagnostic imaging. Meanwhile, some different digital techniques as well as a couple of different digital mammography systems were developed and have already been available for some years. In this review article, the relevant data of key studies are reported, the current status is defined, and perspectives of digital mammography are described. (orig.)

  4. Statistical Software for State Space Methods

    Directory of Open Access Journals (Sweden)

    Jacques J. F. Commandeur

    2011-05-01

    Full Text Available In this paper we review the state space approach to time series analysis and establish the notation that is adopted in this special volume of the Journal of Statistical Software. We first provide some background on the history of state space methods for the analysis of time series. This is followed by a concise overview of linear Gaussian state space analysis including the modelling framework and appropriate estimation methods. We discuss the important class of unobserved component models which incorporate a trend, a seasonal, a cycle, and fixed explanatory and intervention variables for the univariate and multivariate analysis of time series. We continue the discussion by presenting methods for the computation of different estimates for the unobserved state vector: filtering, prediction, and smoothing. Estimation approaches for the other parameters in the model are also considered. Next, we discuss how the estimation procedures can be used for constructing confidence intervals, detecting outlier observations and structural breaks, and testing model assumptions of residual independence, homoscedasticity, and normality. We then show how ARIMA and ARIMA components models fit in the state space framework to time series analysis. We also provide a basic introduction for non-Gaussian state space models. Finally, we present an overview of the software tools currently available for the analysis of time series with state space methods as they are discussed in the other contributions to this special volume.

  5. Current State of Military Hybrid Vehicle Development

    Science.gov (United States)

    2011-01-01

    programme were: • EP-50 parallel hybrid light armoured vehicle (LAV-III) and a refuse hauler • advanced hybrid electric drive (AHED) 8 × 8, 20 ton...herein do not necessarily state or reflect those of the US Government or the DoA, and shall not be used for advertising or product endorsement purposes. 2 Unclassified. Distribution Statement A. Approved for public release.

  6. BIOTECHNOLOGIES OF MEAT PRODUCTS MANUFACTURE. CURRENT STATE

    OpenAIRE

    Bal-Prilipko L. V.; Leonova B. I.

    2014-01-01

    The analysis of literature and patents related to the possibilities of biotechnology for optimizing the domestic meat processing plants was the aim of the article. The analysis of the results of the use of biotechnological methods in the meat processing industry is given. The prospects for their implementation are evaluated. The main development strategy of technological meat processing to develop the methods of obtaining high quality and safe meat products is highlighted. Targeted use of spe...

  7. Forest biomass observation: current state and prospective

    Directory of Open Access Journals (Sweden)

    D. G. Schepaschenko

    2017-08-01

    Full Text Available With this article, we provide an overview of the methods, instruments and initiatives for forest biomass observation at global scale. We focus on the freely available information, provided by both remote and in-situ observations. The advantages and limitation of various space borne methods, including optical, radar (C, L and P band and LiDAR, as well as respective instruments available on the orbit (MODIS, Proba-V, Landsat, Sentinel-1, Sentinel-2 , ALOS PALSAR, Envisat ASAR or expecting (BIOMASS, GEDI, NISAR, SAOCOM-CS are discussed. We emphasize the role of in-situ methods in the development of a biomass models, providing calibration and validation of remote sensing data. We focus on freely available forest biomass maps, databases and empirical models. We describe the functionality of Biomass.Geo-Wiki.org portal, which provides access to a collection of global and regional biomass maps in full resolution with unified legend and units overplayed with high-resolution imagery. The Forest-Observation-System.net is announced as an international cooperation to establish a global in-situ forest biomass database to support earth observation and to encourage investment in relevant field-based observations and science. Prospects of unmanned aerial vehicles in the forest inventory are briefly discussed. The work was partly supported by ESA IFBN project (contract 4000114425/15/NL/FF/gp.

  8. [The current state of obesity in Mexico].

    Science.gov (United States)

    Barrera-Cruz, Antonio; Rodríguez-González, Arturo; Molina-Ayala, Mario Antonio

    2013-01-01

    Excess weight (overweight and obesity) is currently recognized as one of the most important challenges of public health in the world, given its size, speed of growth, and the negative effect on the population who suffers it. Overweight and obesity increases significantly the risk of chronic non-communicable diseases, and premature mortality, as well as the social cost of health. Today, Mexico has the second global prevalence of obesity in the adult population (30 %), which is ten times higher than Korea's or Japan's (4 %). Until 2012, 26 million Mexican adults were overweight, and 22 million, obese. This implies a major challenge for the health sector. Mexico needs to plan and implement strategies and cost-effective actions for the prevention and control of obesity in children, adolescents, and adults. Global experience shows that proper care of obesity and overweight demands to formulate and coordinate efficient multi-sectoral strategies for enhancing protective factors to health, particularly to modify individual behavior, family and community.

  9. BIOTECHNOLOGIES OF MEAT PRODUCTS MANUFACTURE. CURRENT STATE

    Directory of Open Access Journals (Sweden)

    Bal-Prilipko L. V.

    2014-10-01

    Full Text Available The analysis of literature and patents related to the possibilities of biotechnology for optimizing the domestic meat processing plants was the aim of the article. The analysis of the results of the use of biotechnological methods in the meat processing industry is given. The prospects for their implementation are evaluated. The main development strategy of technological meat processing to develop the methods of obtaining high quality and safe meat products is highlighted. Targeted use of special strains of microorganisms in production of functional meat products offers some opportunities. Thus, such action is associated with formation of the following specific dietary components: organic acids, bactericins, enzymes, vitamins and others. They promote to improve the sanitary microbiological, organoleptic, functional and technological parameters of meat products. Using of denitrifying microbial strains could reduce the residual content of sodium nitrite in the finished product, minimizing the possible carcinogenic and mutagenic impact of this compound on a human body, producing functional safe products while maintaining its high organoleptic characteristics.

  10. Current state of molecular imaging research

    International Nuclear Information System (INIS)

    Grimm, J.; Wunder, A.

    2005-01-01

    The recent years have seen significant advances in both molecular biology, allowing the identification of genes and pathways related to disease, and imaging technologies that allow for improved spatial and temporal resolution, enhanced sensitivity, better depth penetration, improved image processing, and beneficial combinations of different imaging modalities. These advances have led to a paradigm shift in the scope of diagnostic imaging. The traditional role of radiological diagnostic imaging is to define gross anatomy and structure in order to detect pathological abnormalities. Available contrast agents are mostly non-specific and can be used to image physiological processes such as changes in blood volume, flow, and perfusion but not to demonstrate pathological alterations at molecular levels. However, alterations at the anatomical-morphological level are relatively late manifestations of underlying molecular changes. Using molecular probes or markers that bind specifically to molecular targets allows for the non-invasive visualization and quantitation of biological processes such as gene expression, apoptosis, or angiogenesis at the molecular level within intact living organisms. This rapidly evolving, multidisciplinary approach, referred to as molecular imaging, promises to enable early diagnosis, can provide improved classification of stage and severity of disease, an objective assessment of treatment efficacy, and a reliable prognosis. Furthermore, molecular imaging is an important tool for the evaluation of physiological and pathophysiological processes, and for the development of new therapies. This article comprises a review of current technologies of molecular imaging, describes the development of contrast agents and various imaging modalities, new applications in specific disease models, and potential future developments. (orig.)

  11. Leadless Pacing: Current State and Future Direction.

    Science.gov (United States)

    Merkel, Matthias; Grotherr, Philipp; Radzewitz, Andrea; Schmitt, Claus

    2017-12-01

    Leadless pacing is now an established alternative to conventional pacing with subcutaneous pocket and transvenous lead for patients with class I or II single-chamber pacing indication. Available 12-month follow-up data shows a 48% fewer major complication rate in patients with Micra™ compared to a historical control group in a nonrandomized study [1]. There is one system with Food and Drug Administration (FDA) approval and two with the Communauté Européenne (CE) mark. The OPS code for the implantation is 8-83d.3 and the procedure has recently been rated as a "new Examination and Treatment Method (NUB)" in the German DRG system, meaning adequate reimbursement is negotiable with health insurance providers. The systems offer similar generator longevity and programming possibilities as conventional pacemaker systems, including rate response, remote monitoring, and MRI safety. The biggest downsides to date are limitations to single-chamber stimulation, lack of long-time data, and concerns of handling of the system at the end of its life span. However, implant procedure complication rates and procedure times do not exceed conventional pacemaker operations, and proper training and patient selection is provided.

  12. Current lung water measurement methods in man

    International Nuclear Information System (INIS)

    Basset, G.; Moreau, F.; Marsac, J.; Capitini, R.; Botter, F.

    1979-01-01

    Two kinds of tracer method are used to estimate the lung water pools differing by the tracer intake and the sector observed. Airborne intake gives an estimate of the tissues irrigated by the lung and bronchial circulation, whereas vascular intake only shows the sectors perfused by the lung flow. Either of these methods is suitable for a general or regional analysis. In general methods the tracer is followed at the lung exit on expired air for the first method, on peripheral arterial blood for the second. Regional methods imply partial or whole-lung external detection systems [fr

  13. Direct current power delivery system and method

    Science.gov (United States)

    Zhang, Di; Garces, Luis Jose; Dai, Jian; Lai, Rixin

    2016-09-06

    A power transmission system includes a first unit for carrying out the steps of receiving high voltage direct current (HVDC) power from an HVDC power line, generating an alternating current (AC) component indicative of a status of the first unit, and adding the AC component to the HVDC power line. Further, the power transmission system includes a second unit for carrying out the steps of generating a direct current (DC) voltage to transfer the HVDC power on the HVDC power line, wherein the HVDC power line is coupled between the first unit and the second unit, detecting a presence or an absence of the added AC component in the HVDC power line, and determining the status of the first unit based on the added AC component.

  14. Current State of Agile User-Centered Design: A Survey

    Science.gov (United States)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  15. The Development and Current State of Translation Process Research

    DEFF Research Database (Denmark)

    Lykke Jakobsen, Arnt

    2014-01-01

    The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer to a spe...... itself, into regions like cognitive psychology, psycho- and neurolinguistics, and neuroscience, where the interest in what goes on in our heads is also very strong.......The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer...... which simultaneously tracks the translator’s eye movements across a screen displaying both a source text and the translator’s emerging translation. This research method was developed as a means of qualifying and strengthening translation process hypotheses based on verbal reports by providing additional...

  16. Current measurement method for characterization of fast switching power semiconductors with Silicon Steel Current Transformer

    DEFF Research Database (Denmark)

    Li, Helong; Beczkowski, Szymon; Munk-Nielsen, Stig

    2015-01-01

    This paper proposes a novel current measurement method with Silicon Steel Current Transformer (SSCT) for the characterization of fast switching power semiconductors. First, the existing current sensors for characterization of fast switching power semiconductors are experimentally evaluated...

  17. Historical Trust Levels Predict Current Welfare State Design

    DEFF Research Database (Denmark)

    Bergh, Andreas; Bjørnskov, Christian

    Using cross-sectional data for 76 countries, we apply instrumental variable techniques based on pronoun drop, temperature and monarchies to demonstrate that historical trust levels predict several indicators of current welfare state design, including universalism and high levels of regulatory...... freedom. We argue that high levels of trust and trustworthiness are necessary, but not sufficient, conditions for societies to develop successful universal welfare states that would otherwise be highly vulnerable to free riding and fraudulent behavior. Our results do not exclude positive feedback from...... welfare state universalism to individual trust, although we claim that the important causal link runs from historically trust levels to current welfare state design....

  18. Cementation Analysis by Eddy Current Method

    OpenAIRE

    M. Zergoug; H. Oubouchou; N. Amimeur

    2009-01-01

    Increase the hardness, the endurance and the life time of material can be realised by surface treatments and remetallings, the electromagnetic properties of steels depend on their composition, their microstructures and constraints applied. We can use the electric and magnetic parameters to evaluate their microstructure. The object of this work is the characterization of cementation by the non-destructive methods and the determination of physicochemical parameters. Samples of low carbon tenor ...

  19. Current status of fluoride volatility method development

    Energy Technology Data Exchange (ETDEWEB)

    Uhlir, J.; Marecek, M.; Skarohlid, J. [UJV - Nuclear Research Institute, Research Centre Rez, CZ-250 68 Husinec - Rez 130 (Czech Republic)

    2013-07-01

    The Fluoride Volatility Method is based on a separation process, which comes out from the specific property of uranium, neptunium and plutonium to form volatile hexafluorides whereas most of fission products (mainly lanthanides) and higher transplutonium elements (americium, curium) present in irradiated fuel form nonvolatile tri-fluorides. Fluoride Volatility Method itself is based on direct fluorination of the spent fuel, but before the fluorination step, the removal of cladding material and subsequent transformation of the fuel into a powdered form with a suitable grain size have to be done. The fluorination is made with fluorine gas in a flame fluorination reactor, where the volatile fluorides (mostly UF{sub 6}) are separated from the non-volatile ones (trivalent minor actinides and majority of fission products). The subsequent operations necessary for partitioning of volatile fluorides are the condensation and evaporation of volatile fluorides, the thermal decomposition of PuF{sub 6} and the finally distillation and sorption used for the purification of uranium product. The Fluoride Volatility Method is considered to be a promising advanced pyrochemical reprocessing technology, which can mainly be used for the reprocessing of oxide spent fuels coming from future GEN IV fast reactors.

  20. Current state about the cuaternary knowledge of Uruguay

    International Nuclear Information System (INIS)

    Anton, D; Goso, H.

    1974-01-01

    This work is about current state of cuaternary knowledge Uruguayan. It is considered that the cuaternary presented a change from the hot and dry weather of the Pliocene to more humid and colder weather in Uruguay.

  1. Carbon footprint: current methods of estimation.

    Science.gov (United States)

    Pandey, Divya; Agrawal, Madhoolika; Pandey, Jai Shanker

    2011-07-01

    Increasing greenhouse gaseous concentration in the atmosphere is perturbing the environment to cause grievous global warming and associated consequences. Following the rule that only measurable is manageable, mensuration of greenhouse gas intensiveness of different products, bodies, and processes is going on worldwide, expressed as their carbon footprints. The methodologies for carbon footprint calculations are still evolving and it is emerging as an important tool for greenhouse gas management. The concept of carbon footprinting has permeated and is being commercialized in all the areas of life and economy, but there is little coherence in definitions and calculations of carbon footprints among the studies. There are disagreements in the selection of gases, and the order of emissions to be covered in footprint calculations. Standards of greenhouse gas accounting are the common resources used in footprint calculations, although there is no mandatory provision of footprint verification. Carbon footprinting is intended to be a tool to guide the relevant emission cuts and verifications, its standardization at international level are therefore necessary. Present review describes the prevailing carbon footprinting methods and raises the related issues.

  2. Current characterization methods for cellulose nanomaterials.

    Science.gov (United States)

    Foster, E Johan; Moon, Robert J; Agarwal, Umesh P; Bortner, Michael J; Bras, Julien; Camarero-Espinosa, Sandra; Chan, Kathleen J; Clift, Martin J D; Cranston, Emily D; Eichhorn, Stephen J; Fox, Douglas M; Hamad, Wadood Y; Heux, Laurent; Jean, Bruno; Korey, Matthew; Nieh, World; Ong, Kimberly J; Reid, Michael S; Renneckar, Scott; Roberts, Rose; Shatkin, Jo Anne; Simonsen, John; Stinson-Bagby, Kelly; Wanasekara, Nandula; Youngblood, Jeff

    2018-04-23

    A new family of materials comprised of cellulose, cellulose nanomaterials (CNMs), having properties and functionalities distinct from molecular cellulose and wood pulp, is being developed for applications that were once thought impossible for cellulosic materials. Commercialization, paralleled by research in this field, is fueled by the unique combination of characteristics, such as high on-axis stiffness, sustainability, scalability, and mechanical reinforcement of a wide variety of materials, leading to their utility across a broad spectrum of high-performance material applications. However, with this exponential growth in interest/activity, the development of measurement protocols necessary for consistent, reliable and accurate materials characterization has been outpaced. These protocols, developed in the broader research community, are critical for the advancement in understanding, process optimization, and utilization of CNMs in materials development. This review establishes detailed best practices, methods and techniques for characterizing CNM particle morphology, surface chemistry, surface charge, purity, crystallinity, rheological properties, mechanical properties, and toxicity for two distinct forms of CNMs: cellulose nanocrystals and cellulose nanofibrils.

  3. The current state of the California biomass energy industry

    International Nuclear Information System (INIS)

    Morris, G.P.

    1994-01-01

    During the decade of the 1980s the California biomass energy industry grew from a few isolated facilities located mostly at pulp mills into the largest biomass energy industry in the world. Currently, more than fifty biomass powered electricity generating facilities provide the state with some 850 Megawatts (MW) of generating capacity, most of it interconnected to the state's electric utility systems. Each year, more than ten million tons of wood and agricultural wastes in the state are converted into fuel, rather than being disposed of using conventional, environmentally costly methods like open burning and landfill burial. As the 1980s began, the California biomass energy industry was in a nascent state. Optimism was blooming within the wood-products and agricultural sectors of California, who foresaw an opportunity to turn costly wastes into profits. At the same time, the independent energy industry itself was being launched. Interest in biomass energy development was spreading to the engineering and construction industries and the financial community as well. A great variety of firms and individuals were engaged in the development of biomass power plants and biomass fuel sources. The second half of the 1980s saw the fruits of the developmental activity that began in the first half of the decade. Biomass energy facilities were entering construction and coming on-line in increasing numbers, and the demand for biomass fuels was increasing in step. As the decade was coming to an end, biomass fuel supplies were hard put to meet the demand, yet a huge number of new facilities entered operation in 1990. This extreme growth spurt of new generating capacity caused a fuel crisis and a shake-out in the industry just as it was entering full-scale operation. The Crisis of Success had been reached. More recently an equilibrium has been achieved in which fuel prices are at levels that produce adequate supplies, while allowing profitable operations at the power plants

  4. Computed tomography: acquisition process, technology and current state

    Directory of Open Access Journals (Sweden)

    Óscar Javier Espitia Mendoza

    2016-02-01

    Full Text Available Computed tomography is a noninvasive scan technique widely applied in areas such as medicine, industry, and geology. This technique allows the three-dimensional reconstruction of the internal structure of an object which is lighted with an X-rays source. The reconstruction is formed with two-dimensional cross-sectional images of the object. Each cross-sectional is obtained from measurements of physical phenomena, such as attenuation, dispersion, and diffraction of X-rays, as result of their interaction with the object. In general, measurements acquisition is performed with methods based on any of these phenomena and according to various architectures classified in generations. Furthermore, in response to the need to simulate acquisition systems for CT, software dedicated to this task has been developed. The objective of this research is to determine the current state of CT techniques, for this, a review of methods, different architectures used for the acquisition and some of its applications is presented. Additionally, results of simulations are presented. The main contributions of this work are the detailed description of acquisition methods and the presentation of the possible trends of the technique.

  5. State Space Methods for Timed Petri Nets

    DEFF Research Database (Denmark)

    Christensen, Søren; Jensen, Kurt; Mailund, Thomas

    2001-01-01

    it possible to condense the usually infinite state space of a timed Petri net into a finite condensed state space without loosing analysis power. The second method supports on-the-fly verification of certain safety properties of timed systems. We discuss the application of the two methods in a number......We present two recently developed state space methods for timed Petri nets. The two methods reconciles state space methods and time concepts based on the introduction of a global clock and associating time stamps to tokens. The first method is based on an equivalence relation on states which makes...

  6. Operating tokamaks with steady-state toroidal current

    International Nuclear Information System (INIS)

    Fisch, N.J.

    1981-04-01

    Continuous operation of a tokamak requires, among other things, a means of continuously providing the toroidal current. Various methods have been proposed to provide this current including methods which utilize radio-frequency waves in any of several frequency regimes. Here we elaborate on the prospects of incorporating these current-drive techniques in tokamak reactors, concentrating on the theoretical minimization of the power requirements

  7. Electronic money in russia: current state and problems of development

    Directory of Open Access Journals (Sweden)

    T. G. Bondarenko

    2016-01-01

    Full Text Available Article is devoted to urgent problems of non-cash methods of calculation development by using electronic money – as one of the modern economically developed state strategic tasks. On modern economic science strong influence appears informatization process. The control expansion tendency, influence and distribution of commerce due to informatization of society led to emergence of the new phenomenon – information economy. Information economy brought new economic events which owing to their novelty are insufficiently studied to life. It is possible to carry electronic money to such phenomena of modern network economy Relevance and, in our opinion, timeliness of this scientific work, consisting in novelty of this non-cash payment method, its prospects and innovation within non-cash methods of calculations. Authors set as the purpose – studying of problems and the prospects of development of electronic money in the Russian Federation. In article theoretical bases of electronic money functioning are described. Determinations and classifications dismissed non-cash a method, and also the principles of electronic money functioning are considered, the questions of their historical development are raised.Authors analyzed statistical data on development of electronic services and channels of their using. Features, benefits and shortcomings of the current state of the market of electronic money are studied. The emphasis on that fact that in modern conditions considerable number of economic actors perform the activities, both in the real environment of economy, and within the virtual environment that promotes expansion of methods of their customer interaction by means of technical devices of personal computers, mobile phones is placed. In article common problems and tendencies of payments with using an electronic money are designated, the research on assessment of the current state and the prospects of electronic money

  8. THE CURRENT STATE OF CLOTHING TRADE IN THE BALKAN COUNTRIES

    OpenAIRE

    TRIPA Simona; CUC Sunhilde; YALDIZ Suleyman

    2017-01-01

    The study presented here is aimed at analysing the current state of clothing trade in the Balkan states. The dynamics of change over a 15‐year period following economic reforms are revealed. The clothing industries play a significant role and continue to contribute to the economic prosperity of countries with an inexpensive labour force. For most Balkan States clothing’s export plays an important role in promoting economic growth and development – for example, exports of garments Albania was ...

  9. Developmental toxicology: adequacy of current methods.

    Science.gov (United States)

    Peters, P W

    1998-01-01

    applicable in developmental and especially prenatal toxicology; to describe the different agents that might act as developmental toxicants or teratogens; to show the broad scope of different effects caused by developmental toxic agents; and to indicate methods to detect and to recognise causes of developmental defects with the primary objective of preventing these disorders.

  10. Helical system. History and current state of helical research

    International Nuclear Information System (INIS)

    Yokoyama, Masayuki

    2017-01-01

    This paper described the following: (1) history of nuclear fusion research of Japan's original heliotron method, (2) worldwide development of nuclear fusion research based on helical system such as stellarator, and (3) worldwide meaning of large helical device (LHD) aiming to demonstrate the steady-state performance of heliotron type in the parameter area extrapolable to the core plasma, and research results of LHD. LHD demonstrated that the helical system is excellent in steady operation performance at the world's most advanced level. In an experiment using deuterium gas in 2017, LHD achieved to reach 120 million degrees of ion temperature, which is one index of nuclear fusion condition, demonstrated the realization of high-performance plasma capable of extrapolating to future nuclear fusion reactors, and established the foundation for full-scale research toward the realization of nuclear fusion reactor. Besides experimental research, this paper also described the helical-type stationary nuclear fusion prototype reactor, FFHR-d1, which was based on progress of large-scale simulation at the world's most advanced level. A large-scale superconducting stellarator experimental device, W7-X, with the same scale as LHD, started experiment in December 2015, whose current state is also touched on here. (A.O.)

  11. Transient and steady-state currents in epoxy resin

    International Nuclear Information System (INIS)

    Guillermin, Christophe; Rain, Pascal; Rowe, Stephen W

    2006-01-01

    Charging and discharging currents have been measured in a diglycidyl ether of bisphenol-A epoxy resin with and without silica fillers, below and above its glass transition temperature T g = 65 deg. C. Both transient and steady-state current densities have been analysed. The average applied fields ranged from 3 to 35 kV mm -1 with a sample thickness of 0.5 mm. Above T g , transient currents suggested a phenomenon of charge injection forming trapped space charges even at low fields. Steady-state currents confirmed that the behaviour was not Ohmic and suggested Schottky-type injection. Below T g , the current is not controlled by the metal-dielectric interface but by the conduction in the volume: the current is Ohmic at low fields and both transient and steady-state currents suggest a phenomenon of space-charge limited currents at high fields. The field threshold is similar in the filler-free and the filled resin. Values in the range 12-17 kV mm -1 have been measured

  12. Transient and steady-state currents in epoxy resin

    Energy Technology Data Exchange (ETDEWEB)

    Guillermin, Christophe [Schneider Electric Industries S.A.S., 37 quai Paul-Louis Merlin, 38050 Grenoble Cedex 9 (France); Rain, Pascal [Laboratoire d' Electrostatique et de Materiaux Dielectriques (LEMD), CNRS, 25 avenue des Martyrs, 38042 Grenoble Cedex 9 (France); Rowe, Stephen W [Schneider Electric Industries S.A.S., 37 quai Paul-Louis Merlin, 38050 Grenoble Cedex 9 (France)

    2006-02-07

    Charging and discharging currents have been measured in a diglycidyl ether of bisphenol-A epoxy resin with and without silica fillers, below and above its glass transition temperature T{sub g} = 65 deg. C. Both transient and steady-state current densities have been analysed. The average applied fields ranged from 3 to 35 kV mm{sup -1} with a sample thickness of 0.5 mm. Above T{sub g}, transient currents suggested a phenomenon of charge injection forming trapped space charges even at low fields. Steady-state currents confirmed that the behaviour was not Ohmic and suggested Schottky-type injection. Below T{sub g}, the current is not controlled by the metal-dielectric interface but by the conduction in the volume: the current is Ohmic at low fields and both transient and steady-state currents suggest a phenomenon of space-charge limited currents at high fields. The field threshold is similar in the filler-free and the filled resin. Values in the range 12-17 kV mm{sup -1} have been measured.

  13. Tri-State Current Source Inverter With Improved Dynamic Performance

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Loh, Poh Chiang; Wong, Chow Pang

    2008-01-01

    Traditional dc-ac current source inverter (CSI) has a right-half-plane (RHP) zero in its control-to-output transfer function. This RHP zero causes the inverter output to fall before rising when a step increase in command reference is required (commonly known as non-minimum-phase effect). To achieve...... a better dynamic response, this paper proposes the design of a tri-state CSI using only an additional semiconductor switch for introducing unique freewheeling states to the traditional six active and three null states of a CSI. With the freewheeling states inserted appropriately within the inverter state...... sequence, the inductive boosting and discharging intervals can be decoupled, allowing the RHP zero to be eliminated with only minor circuit modifications (high level control schemes like predictive and multiloop voltage/current control remain unchanged). The designed inverter can be controlled using...

  14. Proton Therapy Expansion Under Current United States Reimbursement Models

    Energy Technology Data Exchange (ETDEWEB)

    Kerstiens, John [Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States); Johnstone, Peter A.S., E-mail: pajohnst@iupui.edu [Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States); Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana (United States)

    2014-06-01

    Purpose: To determine whether all the existing and planned proton beam therapy (PBT) centers in the United States can survive on a local patient mix that is dictated by insurers, not by number of patients. Methods and Materials: We determined current and projected cancer rates for 10 major US metropolitan areas. Using published utilization rates, we calculated patient percentages who are candidates for PBT. Then, on the basis of current published insurer coverage policies, we applied our experience of what would be covered to determine the net number of patients for whom reimbursement is expected. Having determined the net number of covered patients, we applied our average beam delivery times to determine the total number of minutes needed to treat that patient over the course of their treatment. We then calculated our expected annual patient capacity per treatment room to determine the appropriate number of treatment rooms for the area. Results: The population of patients who will be both PBT candidates and will have treatments reimbursed by insurance is significantly smaller than the population who should receive PBT. Coverage decisions made by insurers reduce the number of PBT rooms that are economically viable. Conclusions: The expansion of PBT centers in the US is not sustainable under the current reimbursement model. Viability of new centers will be limited to those operating in larger regional metropolitan areas, and few metropolitan areas in the US can support multiple centers. In general, 1-room centers require captive (non–PBT-served) populations of approximately 1,000,000 lives to be economically viable, and a large center will require a population of >4,000,000 lives. In areas with smaller populations or where or a PBT center already exists, new centers require subsidy.

  15. PUBLIC ADMINISTRATION: MODERNIZING THE CURRENT MODEL OF STATE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Evgenii V. Ohotskii

    2014-01-01

    Full Text Available Applying the method of retrospective analysis the article deals with the process of forming the scientific fundamentals and the search by the international community of effective and adequate to the current stage of social development public administration system. The author attempts to analyze, in a number of cases in terms of models, features of public administration systems at different stages of historical development, drawing attention to reasons why the Soviet model of public administration did not manage to meet competition, did not provide the required social effect and as a natural result suffered a defeat in the global confrontation between the two social systems. Current models and theoretical concepts of public administration, especially the "new public administration", which became scientific basis for administrative reforms implemented in many countries, are the particular subject of scientific analysis. The author draws attention to major comprehensive characteristics of modern state public administration: making it impossible to absolutize principles of traditional hierarchy system of forced administration; globalization - gradual destruction of boundaries between national and international levels of administration, the growing role of supranational subjects of administration relations; informatization - increasing importance of information and communication technologies and of political networks: development of civil society, especially political parties and non-governmental organizations, growing public involvement in discussion and adoption of the most important administrative decisions; making the state policy more pluralistic and which will result in the formation of nonlinear - humanistic social consciousness as the intellectual basis of modern social governance. The author's position is that Russia is yet to solve the issue of choosing a public administration model that would be effective for further administrative

  16. The current state of serum biomarkers of hepatotoxicity.

    Science.gov (United States)

    Ozer, Josef; Ratner, Marcia; Shaw, Martin; Bailey, Wendy; Schomaker, Shelli

    2008-03-20

    The level of serum alanine aminotransferase (ALT) activity reflects damage to hepatocytes and is considered to be a highly sensitive and fairly specific preclinical and clinical biomarker of hepatotoxicity. However, an increase in serum ALT activity level has also been associated with other organ toxicities, thus, indicating that the enzyme has specificity beyond liver in the absence of correlative histomorphologic alteration in liver. Thus, unidentified non-hepatic sources of serum ALT activity may inadvertently influence the decision of whether to continue development of a novel pharmaceutical compound. To assess the risk of false positives due to extraneous sources of serum ALT activity, additional biomarkers are sought with improved specificity for liver function compared to serum ALT activity alone. Current published biomarker candidates are reviewed herein and compared with ALT performance in preclinical and on occasion, clinical studies. An examination of the current state of hepatotoxic biomarkers indicates that serum F protein, arginase I, and glutathione-S-transferase alpha (GSTalpha) levels, all measured by ELISA, may show utility, however, antibody availability and high cost per run may present limitations to widespread applicability in preclinical safety studies. In contrast, the enzymatic markers sorbitol dehydrogenase, glutamate dehydrogenase, paraxonase, malate dehydrogenase, and purine nucleoside phosphorylase are all readily measured by photometric methods and use reagents that work across preclinical species and humans and are commercially available. The published literature suggests that these markers, once examined collectively in a large qualification study, could provide additional information relative to serum ALT and aspartate aminotransferase (AST) values. Since these biomarkers are found in the serum/plasma of treated humans and rats, they have potential to be utilized as bridging markers to monitor acute drug-induced liver injury in

  17. The current state of serum biomarkers of hepatotoxicity

    International Nuclear Information System (INIS)

    Ozer, Josef; Ratner, Marcia; Shaw, Martin; Bailey, Wendy; Schomaker, Shelli

    2008-01-01

    The level of serum alanine aminotransferase (ALT) activity reflects damage to hepatocytes and is considered to be a highly sensitive and fairly specific preclinical and clinical biomarker of hepatotoxicity. However, an increase in serum ALT activity level has also been associated with other organ toxicities, thus, indicating that the enzyme has specificity beyond liver in the absence of correlative histomorphologic alteration in liver. Thus, unidentified non-hepatic sources of serum ALT activity may inadvertently influence the decision of whether to continue development of a novel pharmaceutical compound. To assess the risk of false positives due to extraneous sources of serum ALT activity, additional biomarkers are sought with improved specificity for liver function compared to serum ALT activity alone. Current published biomarker candidates are reviewed herein and compared with ALT performance in preclinical and on occasion, clinical studies. An examination of the current state of hepatotoxic biomarkers indicates that serum F protein, arginase I, and glutathione-S-transferase alpha (GSTα) levels, all measured by ELISA, may show utility, however, antibody availability and high cost per run may present limitations to widespread applicability in preclinical safety studies. In contrast, the enzymatic markers sorbitol dehydrogenase, glutamate dehydrogenase, paraxonase, malate dehydrogenase, and purine nucleoside phosphorylase are all readily measured by photometric methods and use reagents that work across preclinical species and humans and are commercially available. The published literature suggests that these markers, once examined collectively in a large qualification study, could provide additional information relative to serum ALT and aspartate aminotransferase (AST) values. Since these biomarkers are found in the serum/plasma of treated humans and rats, they have potential to be utilized as bridging markers to monitor acute drug-induced liver injury in early

  18. Current trends in methods for neutron diffusion calculations

    International Nuclear Information System (INIS)

    Adams, C.H.

    1977-01-01

    Current work and trends in the application of neutron diffusion theory to reactor design and analysis are reviewed. Specific topics covered include finite-difference methods, synthesis methods, nodal calculations, finite-elements and perturbation theory

  19. Electromagnetic modeling method for eddy current signal analysis

    International Nuclear Information System (INIS)

    Lee, D. H.; Jung, H. K.; Cheong, Y. M.; Lee, Y. S.; Huh, H.; Yang, D. J.

    2004-10-01

    An electromagnetic modeling method for eddy current signal analysis is necessary before an experiment is performed. Electromagnetic modeling methods consists of the analytical method and the numerical method. Also, the numerical methods can be divided by Finite Element Method(FEM), Boundary Element Method(BEM) and Volume Integral Method(VIM). Each modeling method has some merits and demerits. Therefore, the suitable modeling method can be chosen by considering the characteristics of each modeling. This report explains the principle and application of each modeling method and shows the comparison modeling programs

  20. The Current State of Predicting Furrow Irrigation Erosion

    Science.gov (United States)

    There continues to be a need to predict furrow irrigation erosion to estimate on- and off-site impacts of irrigation management. The objective of this paper is to review the current state of furrow erosion prediction technology considering four models: SISL, WEPP, WinSRFR and APEX. SISL is an empiri...

  1. Methods of driving current by heating a toroidal plasma

    International Nuclear Information System (INIS)

    Fisch, N.J.

    1980-08-01

    In addition to the usual mechanism which utilizes the Ohmic transformer current, which is necessarily pulsed, there exist several steady-state mechanisms. Heating mechanisms which can lend themselves efficiently to continuous current generation include neutral beams, Alfven waves, ion-cyclotron waves, lower-hybrid waves and electron-cyclotron waves

  2. Pancreatic Cancer Diagnostics and Treatment – Current State

    Directory of Open Access Journals (Sweden)

    Zdeněk Krška

    2015-01-01

    Full Text Available Pancreatic ductal adenocarcinoma (PDAC represents permanent and ever rising issue worldwide. Five-year survival does not exceed 3 to 6%, i.e. the worst result among solid tumours. The article evaluates the current state of PDAC diagnostics and treatment specifying also development and trends. Percentage of non-resectable tumours due to locally advanced or metastatic condition varies 60–80%, mostly over 80%. Survival with non-resectable PDAC is 4 to 8 months (median 3.5. In contrast R0 resection shows the survival 18–27 months. Laboratory and imaging screening methods are not indicated on large scale. Risk factors are smoking, alcohol abuse, chronic pancreatitis, diabetes mellitus. Genetic background in most PDAC has not been detected yet. Some genes connected with high risk of PDAC (e.g. BRCA2, PALB2 have been identified as significant and highly penetrative, but link between PDAC and these genes can be seen only in 10–20%. This article surveys perspective oncogenes, tumour suppressor genes, microRNA. Albeit CT is still favoured over other imaging methods, involvement of NMR rises. Surgery prefers the “vessel first” approach, which proves to be justified especially in R0 resection. According to EBM immunotherapy same as radiotherapy are not significant in PDAC treatment. Chemotherapy shows limited importance in conversion treatment of locally advanced or borderline tumours or in case of metastatic spread. Unified procedures cannot be defined due to inhomogenous arrays. Surgical resection is the only chance for curative treatment of PDAC and depends mainly on timely indication for surgery and quality of multidisciplinary team in a high-volume centre.

  3. Research on State-of-Charge (SOC) estimation using current integration based on temperature compensation

    Science.gov (United States)

    Yin, J.; Shen, Y.; Liu, X. T.; Zeng, G. J.; Liu, D. C.

    2017-11-01

    The traditional current integral method for the state-of-charge (SOC) estimation has an unusable estimation accuracy because of the current measuring error. This paper proposed a closed-loop temperature compensation method to improve the SOC estimation accuracy of current integral method by eliminating temperature drift. Through circuit simulation result in Multisim, the stability of current measuring accuracy is improved by more than 10 times. In a designed 70 charge-discharge experimental circle, the SOC estimation error with temperature compensation had 30 times less than error in normal situation without compensation.

  4. Method to obtain resonances and virtual states

    International Nuclear Information System (INIS)

    Adhikari, S.K.; Fonseca, A.C.; Tomio, L.

    1982-01-01

    A naive method is proposed for the calculation of resonance position and-residue at low energies and of virtual states localized in the non-physical sheet associated to the lowest threshold of two body breaking. This method is applied to the study of some virtual states of the few nucleon system. (L.C.) [pt

  5. The current state of science in radiation protection

    International Nuclear Information System (INIS)

    Kaul, A.

    1985-01-01

    The qualification 'according to the current state of science and technology' is regularly found in radiation protection laws. It is assumed that the state of science and technology is codified in the publications of ICRP and ICRU, the International Comissions on Radiological Protection and - Units respectively, and in the UN publication USCEAR. An investigation is made on the extent the regulations of FRD comply with this requirement. Stochastic and non-stochastic damages are differentiated and the problem of assigning equivalent whole-body doses to exposures of specific body organs is considered. (G.Q.)

  6. Study on UPF Harmonic Current Detection Method Based on DSP

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, H J [Northwestern Polytechnical University, Xi' an 710072 (China); Pang, Y F [Xi' an University of Technology, Xi' an 710048 (China); Qiu, Z M [Xi' an University of Technology, Xi' an 710048 (China); Chen, M [Northwestern Polytechnical University, Xi' an 710072 (China)

    2006-10-15

    Unity power factor (UPF) harmonic current detection method applied to active power filter (APF) is presented in this paper. The intention of this method is to make nonlinear loads and active power filter in parallel to be an equivalent resistance. So after compensation, source current is sinusoidal, and has the same shape of source voltage. Meanwhile, there is no harmonic in source current, and the power factor becomes one. The mathematic model of proposed method and the optimum project for equivalent low pass filter in measurement are presented. Finally, the proposed detection method applied to a shunt active power filter experimental prototype based on DSP TMS320F2812 is developed. Simulation and experiment results indicate the method is simple and easy to implement, and can obtain the real-time calculation of harmonic current exactly.

  7. The European Drought Observatory (EDO): Current State and Future Directions

    Science.gov (United States)

    Vogt, Jürgen; Sepulcre, Guadalupe; Magni, Diego; Valentini, Luana; Singleton, Andrew; Micale, Fabio; Barbosa, Paulo

    2013-04-01

    Europe has repeatedly been affected by droughts, resulting in considerable ecological and economic damage and climate change studies indicate a trend towards increasing climate variability most likely resulting in more frequent drought occurrences also in Europe. Against this background, the European Commission's Joint Research Centre (JRC) is developing methods and tools for assessing, monitoring and forecasting droughts in Europe and develops a European Drought Observatory (EDO) to complement and integrate national activities with a European view. At the core of the European Drought Observatory (EDO) is a portal, including a map server, a metadata catalogue, a media-monitor and analysis tools. The map server presents Europe-wide up-to-date information on the occurrence and severity of droughts, which is complemented by more detailed information provided by regional, national and local observatories through OGC compliant web mapping and web coverage services. In addition, time series of historical maps as well as graphs of the temporal evolution of drought indices for individual grid cells and administrative regions in Europe can be retrieved and analysed. Current work is focusing on validating the available products, developing combined indicators, improving the functionalities, extending the linkage to additional national and regional drought information systems and testing options for medium-range probabilistic drought forecasting across Europe. Longer-term goals include the development of long-range drought forecasting products, the analysis of drought hazard and risk, the monitoring of drought impact and the integration of EDO in a global drought information system. The talk will provide an overview on the development and state of EDO, the different products, and the ways to include a wide range of stakeholders (i.e. European, national river basin, and local authorities) in the development of the system as well as an outlook on the future developments.

  8. Current state of orthodontic patients under Bisphosphonate therapy

    Science.gov (United States)

    2013-01-01

    Background Bisphosphonates are a common medication for the prevention and therapy of osteoporosis, but are also applied for tumor diseases. They affect bone metabolism, and therefore also orthodontic treatments, but how it does has yet not been definitively clarified. Therefore, the aim of this research was to evaluate and demonstrate the reported effects and the current state of scientific research regarding orthodontic treatment and bisphosphonate medication exclusively in humans. Material and methods A systematic research of the literature for selected keywords in the Medline database (Pubmed) as well as a manual search was conducted. The following search terms were used: ‘Bisphosphonate’ in combination with: orthodontic, orthodontic treatment, tooth movement. Findings To date, only nine reported patients (case reports/series) and one original article (retrospective cohort study) regarding orthodontic treatment under bisphosphonate medication in humans have been published. Decelerated tooth movement with increased side effects (especially in high-risk patients) and longer treatment duration was reported in some articles. Patients with initial spacing or extraction cases had a higher risk of incomplete space closure and poor root parallelism. Conclusions Orthodontic tooth movement under bisphosphonate medication is possible, especially in low-risk patients (low dose and short period of intake). But the treatment is still not predictable, especially in high-risk patients. Therefore, the altered bone metabolism and higher extent of side effects should be considered in treatment planning, especially in extraction cases or high-risk patients. Regardless, longer treatment duration, decelerated tooth movement, and more side effects, e.g., incomplete space closure and poor root parallelism, should be expected, especially in extraction cases or space closure. PMID:23556517

  9. Eddy current analysis by the finite element circuit method

    International Nuclear Information System (INIS)

    Kameari, A.; Suzuki, Y.

    1977-01-01

    The analysis of the transient eddy current in the conductors by ''Finite Element Circuit Method'' is developed. This method can be easily applied to various geometrical shapes of thin conductors. The eddy currents on the vacuum vessel and the upper and lower support plates of JT-60 machine (which is now being constructed by Japan Atomic Energy Research Institute) are calculated by this method. The magnetic field induced by the eddy current is estimated in the domain occupied by the plasma. And the force exerted to the vacuum vessel is also estimated

  10. [The current state and prospectives of military endocrinology].

    Science.gov (United States)

    Nagibovich, O A; Golota, A S; Krassiĭ, A B

    2014-10-01

    The article is dedicated to the current state and prospectives of military endocrinology demonstrated on the examples of the endocrinology services of armed forces of Serbia, Poland, France, and USA. It is shown that this branch of military healthcare receives much attention abroad. The prospectives of military endocrinology are demonstrated in the context of two nosological forms which dominate in this section of military medicine, namely, primary hypothyroidism an diabetes mellitus.

  11. Introducing nuclear power into currently non-nuclear states

    International Nuclear Information System (INIS)

    Gert, Claassen

    2007-01-01

    As the nuclear renaissance gains momentum, many countries that currently have no nuclear power plants will begin to consider introducing them. It is anticipated that smaller reactors such as the Pebble Bed Modular Reactor (PBMR) will not only be sold to current nuclear states to also to states where there is currently no nuclear experience. A range of issues would have to be considered for nuclear plants to be sold to non-nuclear states, such as the appropriate regulatory environment, standardization and codes, non-proliferation, security of supply, obtaining experienced merchant operators, appropriate financial structures and education and training. The paper considers nine major issues that need to be addressed by governments and vendors alike: 1) political enabling framework, 2) regulatory framework, 3) responsible owner, 4) responsible operator, 5) finance, 6) contact management, 7) fuel supply and waste management framework, 8) training and education, and 9) industrial infrastructure. International cooperation by organisations such as the IAEA, financial institutions and international suppliers will be required to ensure that developing countries as well as developed ones share the benefits of the nuclear renaissance. The opportunities that the nuclear industry affords to develop local skills, create job opportunities and to develop local manufacturing industries are among the important reasons that the South African Government has decided to support and fund the development of the Pebble Bed Modular Reactor project. (author)

  12. Introducing nuclear power into currently non-nuclear states

    International Nuclear Information System (INIS)

    Claassen, Gert

    2007-01-01

    As the nuclear renaissance gains momentum, many countries that currently have no nuclear power plants will begin to consider introducing them. It is anticipated that smaller reactors such as the Pebble Bed Modulator Reactor (PBMR) will not only be sold to current nuclear states to also to states where there is currently no nuclear experience. A range of issues would have to be considered for nuclear plants to be solid to non-nuclear states, such as the appropriate regulatory environment, standardization and codes, non-proliferation, security of supply, obtaining experienced merchant operators, appropriate financial structures and education and training. The paper considers nine major issues that need to be addressed by governments and vendors alike. International cooperation by organisations such as the IAEA, financial institutions and international suppliers will be required to ensure that developing countries as well as developed ones share the benefits of the nuclear renaissance. The opportunities that the nuclear industry affords to develop local skills, create job opportunities and to develop local manufacturing industries are among the important reasons that the South African Government has decided to support and fund the development of the Pebble Bed Modular Reactor project. These considerations are included in the paper. (author)

  13. Current state of low-cycle fatigue research based on multiaxial stress intensity and its challenges. Part 1. Focusing on low-cycle fatigue strength evaluation method of elbow piping subjected to in-plane cyclic bending displacement load

    International Nuclear Information System (INIS)

    Urabe, Yoshio

    2017-01-01

    The R and D of fatigue strength at multiaxial stress intensity is recognized to become extremely important in the future in terms of the elaboration of low-cycle fatigue evaluation of various structures including piping systems and reflection on those standards. This paper focuses on the evaluation method developed by the author, namely cumulative damage rule in consideration of multiaxial stress intensity, and explains the concept and the results of verification and evaluation. It also discusses the engineering problems of the current low cycle fatigue assessment technology that were clarified in the process of developing low-cycle fatigue assessment method based on multiaxial stress intensity. The conservative lifespan and somewhat more conservative actual lifetime of elbow piping can be estimated by the conventional 'revised universal slope method' and 'advanced revised universal slope method.' However, these are empirical rules, and the theoretical basis is not clear. From 'cumulative damage rule in consideration of multiaxial stress intensity,' the author calculated furthermore 'low cycle fatigue evaluation formula based on cumulative damage rule in consideration of multi-axial stress intensity,' and examined it. As a result, an evaluation formula that can reasonably assume the equivalent thermoplastic strain range could be obtained at half of the repeat count as targeted. Furthermore, at the stage where future high precision FEM analysis can be used, direct low-cycle fatigue life curve can be established. (A.O.)

  14. Magnetic Method to Characterize the Current Densities in Breaker Arc

    International Nuclear Information System (INIS)

    Machkour, Nadia

    2005-01-01

    The purpose of this research was to use magnetic induction measurements from a low voltage breaker arc, to reconstruct the arc's current density. The measurements were made using Hall effect sensors, which were placed close to, but outside the breaking device. The arc was modelled as a rectangular current sheet, composed of a mix of threadlike current segments and with a current density varying across the propagation direction. We found the magnetic induction of the arc is a convolution product of the current density, and a function depending on the breaker geometry and arc model. Using deconvolution methods, the current density in the electric arc was determined.The method is used to study the arc behavior into the breaker device. Notably, position, arc size, and electric conductivity could all be determined, and then used to characterize the arc mode, diffuse or concentrated, and study the condition of its mode changing

  15. Procoagulant State in Current and Former Anabolic Androgenic Steroid Abusers

    DEFF Research Database (Denmark)

    Chang, Simon; Rasmussen, Jon J; Frandsen, Mikkel N

    2018-01-01

    BACKGROUND:  Anabolic androgenic steroid (AAS) abusers are considered at increased risk of cardiovascular morbidity and mortality. We hypothesized that current and former AAS abuse would induce a procoagulant shift in the haemostatic balance. METHODS:  Men 18 to 50 years of age were included...

  16. Methods for thermodynamic evaluation of battery state of health

    Science.gov (United States)

    Yazami, Rachid; McMenamin, Joseph; Reynier, Yvan; Fultz, Brent T

    2013-05-21

    Described are systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and battery systems and for characterizing the state of health of electrodes and battery systems. Measurement of physical attributes of electrodes and batteries corresponding to thermodynamically stabilized electrode conditions permit determination of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and battery systems, such as energy, power density, current rate, cycle life and state of health. Also provided are systems and methods for charging a battery according to its state of health.

  17. Method and apparatus for current-output peak detection

    Science.gov (United States)

    De Geronimo, Gianluigi

    2017-01-24

    A method and apparatus for a current-output peak detector. A current-output peak detector circuit is disclosed and works in two phases. The peak detector circuit includes switches to switch the peak detector circuit from the first phase to the second phase upon detection of the peak voltage of an input voltage signal. The peak detector generates a current output with a high degree of accuracy in the second phase.

  18. Evaluation of the Current State of Integrated Water Quality Modelling

    Science.gov (United States)

    Arhonditsis, G. B.; Wellen, C. C.; Ecological Modelling Laboratory

    2010-12-01

    Environmental policy and management implementation require robust methods for assessing the contribution of various point and non-point pollution sources to water quality problems as well as methods for estimating the expected and achieved compliance with the water quality goals. Water quality models have been widely used for creating the scientific basis for management decisions by providing a predictive link between restoration actions and ecosystem response. Modelling water quality and nutrient transport is challenging due a number of constraints associated with the input data and existing knowledge gaps related to the mathematical description of landscape and in-stream biogeochemical processes. While enormous effort has been invested to make watershed models process-based and spatially-distributed, there has not been a comprehensive meta-analysis of model credibility in watershed modelling literature. In this study, we evaluate the current state of integrated water quality modeling across the range of temporal and spatial scales typically utilized. We address several common modeling questions by providing a quantitative assessment of model performance and by assessing how model performance depends on model development. The data compiled represent a heterogeneous group of modeling studies, especially with respect to complexity, spatial and temporal scales and model development objectives. Beginning from 1992, the year when Beven and Binley published their seminal paper on uncertainty analysis in hydrological modelling, and ending in 2009, we selected over 150 papers fitting a number of criteria. These criteria involved publications that: (i) employed distributed or semi-distributed modelling approaches; (ii) provided predictions on flow and nutrient concentration state variables; and (iii) reported fit to measured data. Model performance was quantified with the Nash-Sutcliffe Efficiency, the relative error, and the coefficient of determination. Further, our

  19. Pediatric endocrine society survey of diabetes practices in the United States: What is the current state?

    Science.gov (United States)

    Guttmann-Bauman, I; Thornton, P; Adhikari, S; Reifschneider, K; Wood, M A; Hamby, T; Rubin, K

    2018-03-26

    The Practice Management Committee (PMC) of the Pediatric Endocrine Society (PES) conducted a survey of its membership in February/March, 2016 to assess the current state of pediatric diabetes care delivery across multiple practice types in the United States. The PES distributed an anonymous electronic survey (Survey Monkey) via email to its membership and requested that only one survey be completed for each practice. Ninety-three unique entries from the US were entered into analysis. Care is predominantly delivered by multidisciplinary teams, based at academic institutions (65.6%), with >85% of the provider types being physicians. Each 1.0 full time equivalent certified diabetes educators serves on average 367 diabetic youth. Fee-for-service remains the standard method of reimbursement with 57% of practices reporting financial loss. Survey respondents identified under-reimbursement as a major barrier to improving patient outcomes and lack of behavioral health (BH) providers as a key gap in services provided. Our survey reveals wide variation in all aspects of pediatric diabetes care delivery in the United States. Pediatric Endocrinologists responding to the survey identified a lack of resources and the current fee for service payment model as a major impediment to practice and the lack of integrated BH staff as a key gap in service. The respondents strongly support its organizations' involvement in the dissemination of standards for care delivery and advocacy for a national payment model aligned with chronic diabetes care in the context of our emerging value-based healthcare system. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Current exposure method for CCP’s under Basel III

    Directory of Open Access Journals (Sweden)

    Antonie Kotzé

    2013-04-01

    Full Text Available Exposure-at-default is one of the most interesting and most difficult parameters to estimate in counterparty credit risk. Basel I offered only the non-internal Current Exposure Method for estimating this quantity whilst Basel II further introduced the Standardized Method and an Internal Model Method. Under new Basel III rules a central counterparty is defined as being a financial institution. New principles set out by the Basel Committee on Banking Supervision forces Central Counterparties in using the Current Exposure Method when estimating the credit exposures to Clearing Member banks notwithstanding its shortcomings. The Current Exposure Method relies on the Value-at-Risk methodology and its characteristics are discussed in this note. We will particularly investigate exposures to SAFCOM, the South African clearing house and point to a mathematical discrepancy on how netting is effected through the Basel accord.

  1. Evaluation of Circulating Current Suppression Methods for Parallel Interleaved Inverters

    DEFF Research Database (Denmark)

    Gohil, Ghanshyamsinh Vijaysinh; Bede, Lorand; Teodorescu, Remus

    2016-01-01

    Two-level Voltage Source Converters (VSCs) are often connected in parallel to achieve desired current rating in multi-megawatt Wind Energy Conversion System (WECS). A multi-level converter can be realized by interleaving the carrier signals of the parallel VSCs. As a result, the harmonic perfor......-mance of the WECS can be significantly improved. However, the interleaving of the carrier signals may lead to the flow of circulating current between parallel VSCs and it is highly desirable to avoid/suppress this unwanted circulating current. A comparative evaluation of the different methods to avoid....../suppress the circulating current between the parallel interleaved VSCs is presented in this paper. The losses and the volume of the inductive components and the semiconductor losses are evaluated for the WECS with different circulating current suppression methods. Multi-objective optimizations of the inductive components...

  2. Coherent current states in mesoscopic four-terminal Josephson junction

    International Nuclear Information System (INIS)

    Zareyan, M.; Omelyanchouk, A.N.

    1999-01-01

    A theory is offered for the ballistic 4-terminal Josephson junction. The studied system consist of a mesoscopic two-dimensional normal rectangular layer which is attached on each side to the bulk superconducting banks (terminals). A relation is obtained between the currents through the different terminals, that is valid for arbitrary temperatures and junction sizes. The nonlocal coupling of the supercurrent leads to a new effect, specific for the mesoscopic weak link between two superconducting rings; an applied magnetic flux through one of the rings produces a magnetic flux in the other ring even in the absence of an external flux through the other one. The phase dependent distributions of the local density of Andreev states, of the supercurrents and of the induced order parameter are obtained. The 'interference pattern' for the anomalous average inside the two-dimensional region cam be regulated by the applied magnetic fluxes or the transport currents. For some values of the phase differences between the terminals, the current vortex state and two-dimensional phase slip center appear

  3. Single-electron states near a current-carrying core

    International Nuclear Information System (INIS)

    Masale, M.

    2004-01-01

    The energy spectrum of an electron confined near a current-carrying core is obtained as a function of the azimuthal applied magnetic field within the effective-mass approximation. The double degeneracy of the non-zero electron's axial wave number (k z ) states is lifted by the current-induced magnetic field while that of the non-zero azimuthal quantum number (m) states is preserved. A further analysis is the evaluations of the oscillator strengths for optical transitions involving the lowest-order pair of the electron's energy subbands within the dipole approximation. The radiation field is taken as that of elliptically polarized light incident along the core axis. In this polarization and within the dipole approximation, the allowed transitions are only those governed by the following specific selection rules. The azimuthal quantum numbers of the initial and final states must differ by unity while the electron's axial wave number is conserved. The azimuthal magnetic field is also found to lift the multiple degeneracies of the k z ≠0 interaction integrals as well as those of the oscillator strengths for optical transitions

  4. Evaluation of Current Assessment Methods in Engineering Entrepreneurship Education

    Science.gov (United States)

    Purzer, Senay; Fila, Nicholas; Nataraja, Kavin

    2016-01-01

    Quality assessment is an essential component of education that allows educators to support student learning and improve educational programs. The purpose of this study is to evaluate the current state of assessment in engineering entrepreneurship education. We identified 52 assessment instruments covered in 29 journal articles and conference…

  5. The US Opioid Crisis: Current Federal and State Legal Issues.

    Science.gov (United States)

    Soelberg, Cobin D; Brown, Raeford E; Du Vivier, Derick; Meyer, John E; Ramachandran, Banu K

    2017-11-01

    The United States is in the midst of a devastating opioid misuse epidemic leading to over 33,000 deaths per year from both prescription and illegal opioids. Roughly half of these deaths are attributable to prescription opioids. Federal and state governments have only recently begun to grasp the magnitude of this public health crisis. In 2016, the Centers for Disease Control and Prevention released their Guidelines for Prescribing Opioids for Chronic Pain. While not comprehensive in scope, these guidelines attempt to control and regulate opioid prescribing. Other federal agencies involved with the federal regulatory effort include the Food and Drug Administration (FDA), the Drug Enforcement Agency (DEA), and the Department of Justice. Each federal agency has a unique role in helping to stem the burgeoning opioid misuse epidemic. The DEA, working with the Department of Justice, has enforcement power to prosecute pill mills and physicians for illegal prescribing. The DEA could also implement use of prescription drug monitoring programs (PDMPs), currently administered at the state level, and use of electronic prescribing for schedule II and III medications. The FDA has authority to approve new and safer formulations of immediate- and long-acting opioid medications. More importantly, the FDA can also ask pharmaceutical companies to cease manufacturing a drug. Additionally, state agencies play a critical role in reducing overdose deaths, protecting the public safety, and promoting the medically appropriate treatment of pain. One of the states' primary roles is the regulation of practice of medicine and the insurance industry within their borders. Utilizing this authority, states can both educate physicians about the dangers of opioids and make physician licensure dependent on registering and using PDMPs when prescribing controlled substances. Almost every state has implemented a PDMP to some degree; however, in addition to mandating their use, increased interstate

  6. Ultrasonic methods in solid state physics

    CERN Document Server

    Truell, John; Elbaum, Charles

    1969-01-01

    Ultrasonic Methods in Solid State Physics is devoted to studies of energy loss and velocity of ultrasonic waves which have a bearing on present-day problems in solid-state physics. The discussion is particularly concerned with the type of investigation that can be carried out in the megacycle range of frequencies from a few megacycles to kilomegacycles; it deals almost entirely with short-duration pulse methods rather than with standing-wave methods. The book opens with a chapter on a classical treatment of wave propagation in solids. This is followed by separate chapters on methods and techni

  7. Current opinion about maximum entropy methods in Moessbauer spectroscopy

    International Nuclear Information System (INIS)

    Szymanski, K

    2009-01-01

    Current opinion about Maximum Entropy Methods in Moessbauer Spectroscopy is presented. The most important advantage offered by the method is the correct data processing under circumstances of incomplete information. Disadvantage is the sophisticated algorithm and its application to the specific problems.

  8. Fueling Requirements for Steady State high butane current fraction discharges

    International Nuclear Information System (INIS)

    R.Raman

    2003-01-01

    The CT injector originally used for injecting CTs into 1T toroidal field discharges in the TdeV tokamak was shipped PPPL from the Affiliated Customs Brokers storage facility in Montreal during November 2002. All components were transported safely, without damage, and are currently in storage at PPPL, waiting for further funding in order to begin advanced fueling experiments on NSTX. The components are currently insured through the University of Washington. Several technical presentations were made to investigate the feasibility of the CT injector installation on NSTX. These technical presentations, attached to this document, were: (1) Motivation for Compact Toroida Injection in NSTX; (2) Assessment of the Engineering Feasibility of Installing CTF-II on NSTX; (3) Assessment of the Cost for CT Installation on NSTX--A Peer Review; and (4) CT Fueling for NSTX FY 04-08 steady-state operation needs

  9. Microbial production of hyaluronic acid: current state, challenges, and perspectives

    Directory of Open Access Journals (Sweden)

    Liu Long

    2011-11-01

    Full Text Available Abstract Hyaluronic acid (HA is a natural and linear polymer composed of repeating disaccharide units of β-1, 3-N-acetyl glucosamine and β-1, 4-glucuronic acid with a molecular weight up to 6 million Daltons. With excellent viscoelasticity, high moisture retention capacity, and high biocompatibility, HA finds a wide-range of applications in medicine, cosmetics, and nutraceuticals. Traditionally HA was extracted from rooster combs, and now it is mainly produced via streptococcal fermentation. Recently the production of HA via recombinant systems has received increasing interest due to the avoidance of potential toxins. This work summarizes the research history and current commercial market of HA, and then deeply analyzes the current state of microbial production of HA by Streptococcus zooepidemicus and recombinant systems, and finally discusses the challenges facing microbial HA production and proposes several research outlines to meet the challenges.

  10. Method and apparatus for detecting cyber attacks on an alternating current power grid

    Science.gov (United States)

    McEachern, Alexander; Hofmann, Ronald

    2017-04-11

    A method and apparatus for detecting cyber attacks on remotely-operable elements of an alternating current distribution grid. Two state estimates of the distribution grid are prepared, one of which uses micro-synchrophasors. A difference between the two state estimates indicates a possible cyber attack.

  11. New Way of Characterizing the State of the Ring Current

    Science.gov (United States)

    Wolf, R.; Bao, S.; Gkioulidou, M.; Yang, J.; Toffoletto, F.

    2017-12-01

    The flux tube entropy S is invariant in ideal MHD and is a good way to characterize the degree to which a closed flux tube is loaded with particle energy. Flux tube entropy generally increases with increasing geocentric distance. A flux tube that is injected from the plasma sheet into the ring current tends to be a bubble that has a lower S value than typical plasma sheet flux tubes, and it tends to penetrate to a position where the surroundings matches its S. From this point of view, a good way to characterize the state of the ring current is through the function dF/dS, which specifies how much magnetic flux is occupied by tubes with different degrees of loading. By displaying dF/dS curves before and during storm main phases simulated with the RCM-E code, we determine that, in the model, the injection of the stormtime ring current consists of replacing pre-storm low-S flux tubes with tubes from the plasma sheet that have a certain limited range of S, which is well below typical plasma-sheet values. We also display dF/dS curves for passes by the Van Allen Probes before and during storm main phases, and compare with the RCM-E-derived curves, to gain insight into the nature of the flux tubes that are injected to form the real storm-time ring current.

  12. The Current State of Silicone-Based Dielectric Elastomer Transducers

    DEFF Research Database (Denmark)

    Madsen, Frederikke Bahrt; Daugaard, Anders Egede; Hvilsted, Søren

    2016-01-01

    class of transducer due to their inherent lightweight and potentially large strains. For the field to progress towards industrial implementation, a leap in material devel- opment is required, specifically targeting longer lifetime and higher energy densities to provide more efficient transduction at lower...... driving voltages. In this review, the current state of sili- cone elastomers for DETs is summarised and critically discussed, including commercial elastomers, composites, polymer blends, grafted elastomers and complex network structures. For future developments in the field it is essential that all aspects...

  13. Tetracritical point and current circulations in superconducting state

    International Nuclear Information System (INIS)

    Belyavskij, V.I.; Kopaev, Yu.V.; Smirnov, M.Yu.

    2005-01-01

    Phase diagram reflecting the key peculiar features of the standard diagram of the cuprate superconductors was studied in terms of the Ginzburg-Landau phenomenology near the tetracritical point resulting from the competition of superconducting and dielectric channels of pairing. Two-component parameter of order the relative phase of which is associated with antiferromagnetic dielectric ordering corresponds to the superconducting pairing at repulsion. In case of slight doping the dielectric order coexists with superconductivity below the temperature of superconducting phase transition and manifests itself as a slight pseudoslit above the mentioned temperature. A segment of pseudoslit region adjacent to the superconducting state corresponds to the matured fluctuations of the order parameter in the form of quasi-stationary states of noncoherent superconducting pairs and may be interpreted as a region of a strong pseudoslit. At increase of doping one observes a phase transition from the coexistence region and the orbital antiferromagnetism to the conventional superconducting state covering the region of matured fluctuations of the order parameter in the form of quasi-stationary states of the noncorrelated orbital circulation currents adjacent to the line of phase transition [ru

  14. [Physiotherapeutic care marketing research: current state-of-the art].

    Science.gov (United States)

    Babaskin, D V

    2011-01-01

    Successful introduction of modern technologies into the national health care systems strongly depends on the current pharmaceutical market situation. The present article is focused on the peculiarities of marketing research with special reference to physiotherapeutic services and commodities. Analysis of the structure and sequence of marketing research processes is described along with the methods applied for the purpose including their support by the use of Internet resources and technologies.

  15. Current Methods to Detoxify Fly Ash from Waste Incineration

    Energy Technology Data Exchange (ETDEWEB)

    Hallgren, Christine; Stroemberg, Birgitta [TPS Termiska Processer AB, Nykoeping (Sweden)

    2004-07-01

    vitrification, electric arc and melting in a secondary combustion chamber by adding coke as a heating source (coke bed melting furnaces) or residual carbon in the fly ash (Rotary surface melting furnace) are the most common methods. In general, vitrification processes require a high-energy input and are therefore relatively cost intensive. Locking the hazardous components into the matrix by a stabilization/solidification with cement is a common alternative to decontamination. Mixing the fly ash with cement or asphalt is widely used for the reuse of fly ash from coal incineration, but it requires careful attention to any leaching of heavy metals if applied to fly ash from waste incineration. Studies by mixing fly ash with cement at concentrations from 5 to 70 % showed, that in most cases an additional pretreatment step, e.g. washing in HNO{sub 3} solution, is necessary to receive acceptable leaching behaviour and required properties as building material. Related European regulations are currently pending. On the other hand, the use of fly ash as filler for asphalt does not require any pretreatment and is already commonly applied in some countries such as the Netherlands as a well-established method. Solvent extraction methods such as acidic extraction (3R-process) or combined basic and acidic extraction (MR-process) are also designed to remove the contaminants. The effectiveness of these methods is only moderate and a further thermal treatment is required to destroy the dioxins. These methods require relatively high amounts of chemicals and wastewater management. However, they are supposed to be relatively cost effective. Other treatment options that are being tested at laboratory scale such as microbiological treatment and supercritical extraction are optimistic but have no realistic practical relevance at this state.

  16. Nuclear power reactor core melt accidents. Current State of Knowledge

    International Nuclear Information System (INIS)

    Jacquemain, Didier; Cenerino, Gerard; Corenwinder, Francois; Raimond, Emmanuel IRSN; Bentaib, Ahmed; Bonneville, Herve; Clement, Bernard; Cranga, Michel; Fichot, Florian; Koundy, Vincent; Meignen, Renaud; Corenwinder, Francois; Leteinturier, Denis; Monroig, Frederique; Nahas, Georges; Pichereau, Frederique; Van-Dorsselaere, Jean-Pierre; Couturier, Jean; Debaudringhien, Cecile; Duprat, Anna; Dupuy, Patricia; Evrard, Jean-Michel; Nicaise, Gregory; Berthoud, Georges; Studer, Etienne; Boulaud, Denis; Chaumont, Bernard; Clement, Bernard; Gonzalez, Richard; Queniart, Daniel; Peltier, Jean; Goue, Georges; Lefevre, Odile; Marano, Sandrine; Gobin, Jean-Dominique; Schwarz, Michel; Repussard, Jacques; Haste, Tim; Ducros, Gerard; Journeau, Christophe; Magallon, Daniel; Seiler, Jean-Marie; Tourniaire, Bruno; Durin, Michel; Andreo, Francois; Atkhen, Kresna; Daguse, Thierry; Dubreuil-Chambardel, Alain; Kappler, Francois; Labadie, Gerard; Schumm, Andreas; Gauntt, Randall O.; Birchley, Jonathan

    2015-11-01

    accidents and, secondly, the physical phenomena, studies and analyses described in Chapters 5 to 8. Chapter 5 is devoted to describing the physical phenomena liable to occur during a core melt accident, in the reactor vessel and the reactor containment. It also presents the sequence of events and the methods for mitigating their impact. For each of the subjects covered, a summary of the physical phenomena involved is followed by a description of the past, present and planned experiments designed to study these phenomena, along with their modelling, the validation of which is based on the test results. The chapter then describes the computer codes that couple all of the models and provide the best current state of knowledge of the phenomena. Lastly, this knowledge is reviewed while taking into account the gaps and uncertainties, and the outlook for the future is presented, notably regarding experimental programmes and the development of modelling and numerical simulation tools. Chapter 6 focuses on the behaviour of the containment enclosures during a core melt accident. After summarising the potential leakage paths of radioactive substances through the different containments in the case of the accidents chosen in the design phase, it presents the studies of the mechanical behaviour of the different containments under the loadings that can result from the hazards linked with the phenomena described in Chapter 5. Chapter 6 also discusses the risks of containment building bypass in a core melt accident situation. Chapter 7 presents the lessons learned regarding the phenomenology of core melt accidents and the improvement of nuclear reactor safety. Lastly, Chapter 8 presents a review of development and validation efforts regarding the main computer codes dealing with 'severe accidents', which draw on and build upon the knowledge mainly acquired through the research programmes: ASTEC (IRSN and GRS), MAAP-4 (FAI (US)) and used by EDF and by utilities in many other

  17. The current matrix elements from HAL QCD method

    Science.gov (United States)

    Watanabe, Kai; Ishii, Noriyoshi

    2018-03-01

    HAL QCD method is a method to construct a potential (HAL QCD potential) that reproduces the NN scattering phase shift faithful to the QCD. The HAL QCD potential is obtained from QCD by eliminating the degrees of freedom of quarks and gluons and leaving only two particular hadrons. Therefor, in the effective quantum mechanics of two nucleons defined by HAL QCD potential, the conserved current consists not only of the nucleon current but also an extra current originating from the potential (two-body current). Though the form of the two-body current is closely related to the potential, it is not straight forward to extract the former from the latter. In this work, we derive the the current matrix element formula in the quantum mechanics defined by the HAL QCD potential. As a first step, we focus on the non-relativistic case. To give an explicit example, we consider a second quantized non-relativistic two-channel coupling model which we refer to as the original model. From the original model, the HAL QCD potential for the open channel is constructed by eliminating the closed channel in the elastic two-particle scattering region. The current matrix element formula is derived by demanding the effective quantum mechanics defined by the HAL QCD potential to respond to the external field in the same way as the original two-channel coupling model.

  18. Quantum decay of metastable current states in rf squids

    International Nuclear Information System (INIS)

    Dmitrenko, I.M.; Khlus, V.A.; Tsoj, C.M.; Shnyrkov, V.I.

    1985-01-01

    Quantum decay of metastable current states in a rf SQUID superconducting ring of a hysteresis mode are considered. Point contacts are used as a Josephson weak link. The first derivative of rf IVC, dVsub(T)/dIsub(RF), is measured which gives the dependence of the density of decay probability on the amplitude of magnetic flux oscillations in the ring. The temperature dependence of probability distribution width between 4.2 and 0.5 K suggests that for most of high-ohmic contacts Nb-Nb, Nb-Ag-Nb the quantum mechanisms of decay become dominant beginning with the temperature of about 2 K. The experimental parameters of distribution of decay probability in the quantum limit are compared to those calculated by the theory of macroscopic quantum tunneling in the limit of high and low dissipation. The experimental values of probability density distribution width and characteristic quantum temperature are higher than the theoretical ones, the fact can be attributed to the deviation of current-phase relation of contact from a sinusoidal one. Besides, some contacts seem to correspond to the case of an intermediate value of dissipation. As the frequency of rf oscillations varies from 30 to 6 MHz, the distribution width remains unchanged in accordance with the theory of quantum tunneling decay of metastable current state in the ring in the limit of high damping. At low temperatures (T approximately 0.5 K), and rather small damping coefficient, the density of probability displays anomalous peaks when the amplitude of rf oscillations is lower considerably than the critical vaiue of magnetic flux in the ring

  19. THE CURRENT STATE OF CLOTHING TRADE IN THE BALKAN COUNTRIES

    Directory of Open Access Journals (Sweden)

    TRIPA Simona

    2017-05-01

    Full Text Available The study presented here is aimed at analysing the current state of clothing trade in the Balkan states. The dynamics of change over a 15‐year period following economic reforms are revealed. The clothing industries play a significant role and continue to contribute to the economic prosperity of countries with an inexpensive labour force. For most Balkan States clothing’s export plays an important role in promoting economic growth and development – for example, exports of garments Albania was in 2015, 16.81% of its exports, Republic of Macedonia 11.75% of its exports, in Turkey10.51% etc. The main factors which influence the level of competitiveness of clothing products from the Balkans are the gross value added per employee and wages. When the producers of the Balkan countries will create products with higher added value in garment industry the competitiveness of these countries will decrease. Also rising wages in this industry, as a result of trade union pressure or government policy, will lead to decreasing competitiveness of these products on the EU market and implicitly to the decrease of exports of garments from these countries. The main challenges that must face the Balkan States are related to restructuring of economic system, changing trade markets and patterns, declining of domestic demand of most merchandise, reduction of competitive ability, narrow export base, and lower economies of scale. The main opportunities that most of these countries can exploit are related to their geographical position, membership of the EU market, infrastructure in garment sector, and highly skilled workforce.

  20. Economic security of modern Russia: the current state and prospects

    Directory of Open Access Journals (Sweden)

    Karanina Elena

    2018-01-01

    Full Text Available In the conditions of instability of the world economy and the introduction of sanctions against Russia by a number of countries, the problem of ensuring national economic security has become particularly relevant. This topic also has a high scientific, practical and social significance, as it allows to identify possible gaps in the economic security of modern Russia and timely develop mechanisms to eliminate them to protect the national interests of the state. The purpose of this article is to determine the state and prospects of improving the economic security of modern Russia. This can be achieved by solving the following tasks: review of existing methods to evaluate the economic security of country, conduct a SWOT analysis of economic security of modern Russia, the development of suggestions for its improvement. This research analyzes various aspects of the economic security of modern Russia. As a result, the author developed an integrated method to ensuring the economic security of the country, as well as a matrix of economic security within this method. The way of increase of economic security of modern Russia is offered. Thus, to overcome the threats for the economic security of modern Russia, it is necessary to implement the recommendations developed by the authors, including the establishment of their own production and the construction of an innovatively oriented model of the economy. This will ensure the economic security of modern Russia and its stable development in the future.

  1. The integral equation method applied to eddy currents

    International Nuclear Information System (INIS)

    Biddlecombe, C.S.; Collie, C.J.; Simkin, J.; Trowbridge, C.W.

    1976-04-01

    An algorithm for the numerical solution of eddy current problems is described, based on the direct solution of the integral equation for the potentials. In this method only the conducting and iron regions need to be divided into elements, and there are no boundary conditions. Results from two computer programs using this method for iron free problems for various two-dimensional geometries are presented and compared with analytic solutions. (author)

  2. Azelaic acid in dermatological treatment – current state of knowledge

    Directory of Open Access Journals (Sweden)

    Radomir Reszke

    2016-09-01

    Full Text Available Azelaic acid (AZA is a naturally occurring substance produced by Malassezia furfur which exerts various effects on the skin. Azelaic acid has antibacterial, anti-inflammatory, keratolytic, comedolytic, sebostatic and tyrosinase-inhibiting properties. Topical application of AZA as 20% cream or 15% gel is a well-established therapeutic method in various common dermatoses, mainly acne vulgaris, rosacea and disorders associated with hyperpigmentation. Azelaic acid is used as a component of chemical peels as well. The paper summarizes the most relevant issues concerning AZA application in dermatological treatment based on current knowledge.

  3. Study program for constant current capacitor charging method

    Energy Technology Data Exchange (ETDEWEB)

    Pugh, C.

    1978-10-04

    The objective of the study program was to determine the best method of charging 20,000 to 132,000 microfarads of capacitance to 22 kVdc in 14 to 15 sec. Component costs, sizes, weights, line current graphs, copies of calculations and manufacturer's data are included.

  4. Current status of fertility control methods in India

    Indian Academy of Sciences (India)

    Use of the condom increased to 3.1% from 2.4%. ... Current efforts in India to develop a male contraceptive are mainly directed towards ... the existing range of contraceptive methods available in the National Family Planning Programme. ... long acting, relatively easily removed and fertility returns rapidly after their removal.

  5. Cryptography in the Cloud Computing: the Current State and Logical Tasks

    OpenAIRE

    Sergey Nikolaevich Kyazhin; Andrey Vladimirovich Moiseev

    2013-01-01

    The current state of the cloud computing (CC) information security is analysed and logical problems of storage and data transmission security at CC are allocated. Cryptographic methods of data security in CC, in particular, lightweight cryptography and the cryptography based on bilinear pairings are described.

  6. Cryptography in the Cloud Computing: the Current State and Logical Tasks

    Directory of Open Access Journals (Sweden)

    Sergey Nikolaevich Kyazhin

    2013-09-01

    Full Text Available The current state of the cloud computing (CC information security is analysed and logical problems of storage and data transmission security at CC are allocated. Cryptographic methods of data security in CC, in particular, lightweight cryptography and the cryptography based on bilinear pairings are described.

  7. Imaging of lumbar degenerative disk disease: history and current state

    International Nuclear Information System (INIS)

    Emch, Todd M.; Modic, Michael T.

    2011-01-01

    One of the most common indications for performing magnetic resonance (MR) imaging of the lumbar spine is the symptom complex thought to originate as a result of degenerative disk disease. MR imaging, which has emerged as perhaps the modality of choice for imaging degenerative disk disease, can readily demonstrate disk pathology, degenerative endplate changes, facet and ligamentous hypertrophic changes, and the sequelae of instability. Its role in terms of predicting natural history of low back pain, identifying causality, or offering prognostic information is unclear. As available modalities for imaging the spine have progressed from radiography, myelography, and computed tomography to MR imaging, there have also been advances in spine surgery for degenerative disk disease. These advances are described in a temporal context for historical purposes with a focus on MR imaging's history and current state. (orig.)

  8. Development and current state of dosimetry in Cuba

    International Nuclear Information System (INIS)

    Prieto Miranda, E.F.; Cuesta Fuente, G.; Chavez Ardanza, A.

    1999-01-01

    In Cuba, the application of the radiation technologies has been growing in the last years, and at present there are several dosimetry systems with different ranges of absorbed dose. Diverse researches were carried out on high dose dosimetry with the following dosimetry systems: Fricke, ceric-cerous sulfate, ethanol-chlorobenzene, cupric sulfate and Perspex (Red 4034 AE and Clear HX). In this paper the development achieved during the last 15 years in the high dose dosimetry for radiation processing in Cuba is presented, as well as, the current state of different dosimetry systems employed for standardization and for process control. The paper also reports the results of dosimetry intercomparison studies that were performed with the Ezeiza Atomic Center of Argentine and the International Dose Assurance Service (IDAS) of IAEA. (author)

  9. The current state of industry development in Ukraine: advance perspective

    Directory of Open Access Journals (Sweden)

    Skyba Maryna Valeriyivna

    2015-02-01

    Full Text Available The current state of the industry of Ukraine are considered at the article. The author determined that the stabilization of the situation and further development of the industry need first of all cessation of hostilities. It is necessary to implement effective measures to combat corruption, the development of consistent, constructive and concerted action on the formation of institutions guaranteeing stability, predictability and transparency of the market rules and procedures that minimize the impact of shadow factors, and implementation of professional privatization and limitation of monopoly at the markets, forming a transparent, competitive business environment, the introduction of new energy saving technologies. These measures will help attract investment, increase production and improve enterprise profitability.

  10. Licensed pertussis vaccines in the United States: History and current state

    OpenAIRE

    Klein, Nicola P

    2014-01-01

    The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that w...

  11. A sensorless control method for capacitor voltage balance and circulating current suppression of modular multilevel converter

    DEFF Research Database (Denmark)

    Liu, Hui; Ma, Ke; Loh, Poh Chiang

    2015-01-01

    There are several problems in the Modular Multilevel Converter (MMC), such as the appearance of circulating current, capacitor voltage unbalance and the requirement for a high number of sensors. All these problems will decrease the reliability and raise the cost/uncertainty of using MMC solutions....... As a result, a sensorless control method is proposed in this paper, which targets to improve the performances of MMC in respect to the above mentioned disadvantages: To decrease the cost and simplify the physical implementation, a state observer is proposed and designed to estimate both the capacitor voltages...... and the circulating currents in order to replace the high numbers of sensors. Furthermore, a control method combining the circulating current suppression and the capacitor voltage balancing is conducted based on the proposed state observer. It is concluded that the proposed state observer and control method can...

  12. Scattering theory methods for bound state problems

    International Nuclear Information System (INIS)

    Raphael, R.B.; Tobocman, W.

    1978-01-01

    For the analysis of the properties of a bound state system one may use in place of the Schroedinger equation the Lippmann-Schwinger (LS) equation for the wave function or the LS equation for the reactance operator. Use of the LS equation for the reactance operator constrains the solution to have correct asymptotic behaviour, so this approach would appear to be desirable when the bound state wave function is to be used to calculate particle transfer form factors. The Schroedinger equation based N-level analysis of the s-wave bound states of a square well is compared to the ones based on the LS equation. It is found that the LS equation methods work better than the Schroedinger equation method. The method that uses the LS equation for the wave function gives the best results for the wave functions while the method that uses the LS equation for the reactance operator gives the best results for the binding energies. The accuracy of the reactance operator based method is remarkably insensitive to changes in the oscillator constant used for the harmonic oscillator function basis set. It is also remarkably insensitive to the number of nodes in the bound state wave function. (Auth.)

  13. Enceladus: three-act play and current state

    Science.gov (United States)

    Luan, J.; Goldreich, P.

    2017-12-01

    Eccentricity (e) growth as Enceladus migrates deeper into mean motion resonance with Dione results in increased tidal heating. As the bottom of the ice shell melts, the rate of tidal heating jumps and runaway melting ensues. At the end of run-away melting, the shell's thickness has fallen below the value at which the frequency of free libration equals the orbital mean motion and e has damped to well below its current value. Subsequently, both the shell thickness and e partake in a limit cycle. As e damps toward its minimum value, the shell's thickness asymptotically approaches its resonant value from below. After minimum e, the shell thickens quickly and e grows even faster. This cycle is likely to have been repeated multiple times in the past. Currently, e is much smaller than its equilibrium value corresponding to the shell thickness. Physical libration resonance resolves this mystery, it ensures that the low-e and medium-thickness state is present for most of the time between consecutive limit cycles. It is a robust scenario that avoids fine tuning or extreme parameter choice, and naturally produces episodic stages of high heating, consistent with softening of topographical features on Enceladus.

  14. ["Good dying"--definition and current state of research].

    Science.gov (United States)

    Hutter, Nico; Stößel, Ulrich; Meffert, Cornelia; Körner, Mirjam; Bozzaro, Claudia; Becker, Gerhild; Baumeister, Harald

    2015-08-01

    The advances of modern medicine did not only result in prolongation of life expectancy, but also led to a shift from dying at home to dying in public institutions. In western countries most people die at advanced age in medical facilities. Hence, the question regarding the conditions, which should be provided by society and especially medicine, to allow terminally ill people to experience "good dying" is substantial. For this purpose, an examination of patients', family members' and health care providers' understanding of the term " good dying" is required. The present paper aims at shedding light on the term "good dying" and to summarize the current state of research. Therefore, the attributes of "good dying" will be described from the perspectives of patients, family members and health care providers, which are discussed and examined in current medical-sociological research. These attributes can be illustrated on three dimensions: Quality of life at the end of life (e. g. pain relief, mental well-being), quality of dying (e. g. avoiding prolonged dying, autonomy, presence of relatives) and quality of health care at the end of life (e. g. patient-oriented health care, positive communication between health care providers and patients, availability of guidelines). Although the attributes of "good dying" are described in detail in the existing literature, further studies have to clarify the relevance and impact of these attributes as predictors of "good dying". © Georg Thieme Verlag KG Stuttgart · New York.

  15. Consumer Mobile Health Apps: Current State, Barriers, and Future Directions.

    Science.gov (United States)

    Kao, Cheng-Kai; Liebovitz, David M

    2017-05-01

    This paper discusses the current state, barriers, and future directions of consumer-facing applications (apps). There are currently more than 165,000 mobile health apps publicly available in major app stores, the vast majority of which are designed for patients. The top 2 categories are wellness management and disease management apps, whereas other categories include self-diagnosis, medication reminder, and electronic patient portal apps. Apps specific to physical medicine and rehabilitation also are reviewed. These apps have the potential to provide low-cost, around-the-clock access to high-quality, evidence-based health information to end users on a global scale. However, they have not yet lived up to their potential due to multiple barriers, including lack of regulatory oversight, limited evidence-based literature, and concerns of privacy and security. The future directions may consist of improving data integration into the health care system, an interoperable app platform allowing access to electronic health record data, cloud-based personal health record across health care networks, and increasing app prescription by health care providers. For consumer mobile health apps to fully contribute value to health care delivery and chronic disease management, all stakeholders within the ecosystem must collaborate to overcome the significant barriers. Copyright © 2017 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  16. Measuring electric conductivity in liquid metals by eddy current method

    International Nuclear Information System (INIS)

    Zhuravlev, S.P.; Ostrovskij, O.I.; Grigoryan, V.A.

    1982-01-01

    Technique permitting to apply the method of vertiginous currents for investigation of electric conductivity of metal melts in the high temperature range is presented. Interferences affecting accuracy of measurements are specified and ways of their removing are pointed out. Scheme of measuring and design of the facility are described. Results of measuring electric resistance of liquid Fe, Co, Ni obtained for the first time by this method are presented. The data obtained agree with the results of measurements conducted by the method of the rotating magnetic field. Difference in absolute values of electric resistance in parallel experiments for each metal does not exceed 4%

  17. Electrostatic Discharge Current Linear Approach and Circuit Design Method

    Directory of Open Access Journals (Sweden)

    Pavlos K. Katsivelis

    2010-11-01

    Full Text Available The Electrostatic Discharge phenomenon is a great threat to all electronic devices and ICs. An electric charge passing rapidly from a charged body to another can seriously harm the last one. However, there is a lack in a linear mathematical approach which will make it possible to design a circuit capable of producing such a sophisticated current waveform. The commonly accepted Electrostatic Discharge current waveform is the one set by the IEC 61000-4-2. However, the over-simplified circuit included in the same standard is incapable of producing such a waveform. Treating the Electrostatic Discharge current waveform of the IEC 61000-4-2 as reference, an approximation method, based on Prony’s method, is developed and applied in order to obtain a linear system’s response. Considering a known input, a method to design a circuit, able to generate this ESD current waveform in presented. The circuit synthesis assumes ideal active elements. A simulation is carried out using the PSpice software.

  18. Current Mathematical Methods Used in QSAR/QSPR Studies

    Directory of Open Access Journals (Sweden)

    Peixun Liu

    2009-04-01

    Full Text Available This paper gives an overview of the mathematical methods currently used in quantitative structure-activity/property relationship (QASR/QSPR studies. Recently, the mathematical methods applied to the regression of QASR/QSPR models are developing very fast, and new methods, such as Gene Expression Programming (GEP, Project Pursuit Regression (PPR and Local Lazy Regression (LLR have appeared on the QASR/QSPR stage. At the same time, the earlier methods, including Multiple Linear Regression (MLR, Partial Least Squares (PLS, Neural Networks (NN, Support Vector Machine (SVM and so on, are being upgraded to improve their performance in QASR/QSPR studies. These new and upgraded methods and algorithms are described in detail, and their advantages and disadvantages are evaluated and discussed, to show their application potential in QASR/QSPR studies in the future.

  19. Current-drive theory I: survey of methods

    International Nuclear Information System (INIS)

    Fisch, N.J.

    1986-01-01

    A variety of methods may be employed to drive toroidal electric current in a plasma torus. The most promising scheme is the injection of radiofrequency waves into the torus to push electrons or ions. The pushing mechanism can be either the direct conversion of wave to particle momentum, or a more subtle effect involving the alteration by waves of interparticle collisions. Alternatively, current can be produced through the injection of neutral beams, the reflection of plasma radiation, or the injection of frozen pellets. The efficacy of these schemes, in a variety of regimes, will be assessed. 9 refs

  20. Renormalization methods in solid state physics

    Energy Technology Data Exchange (ETDEWEB)

    Nozieres, P [Institut Max von Laue - Paul Langevin, 38 - Grenoble (France)

    1976-01-01

    Renormalization methods in various solid state problems (e.g., the Kondo effect) are analyzed from a qualitative vantage point. Our goal is to show how the renormalization procedure works, and to uncover a few simple general ideas (universality, phenomenological descriptions, etc...).

  1. The concept of electronegativity. The current state of the problem

    International Nuclear Information System (INIS)

    Cherkasov, Artem R; Galkin, Vladimir I; Zueva, Ekaterina M; Cherkasov, Rafael A

    1998-01-01

    A systematic account is given of the current ideas about atomic and group electronegativities and the trends in the development of the concept of electronegativity are analysed. Attention is concentrated on the latest approaches to the definition of electronegativity - the concept of 'orbital' electronegativities and the density functional theory. A procedure is proposed for the determination of 'inductive' electronegativities, which permits a correct theoretical calculation of the electronegativity of a substituent from the electronegativities of individual atoms and the steric structure. It is shown that the approach developed has a series of important advantages - for example, it makes it possible to calculate the group electronegativities of isomeric substituents avoiding the principle of the equalisation of electronegativities. A survey of literature data and generalisation of the method proposed by the authors have made it possible to formulate the concept of electronegativity as an unchanging fundamental immanent characteristic of a chemical element. The bibliography includes 222 references.

  2. Fertility Preservation for Pediatric Patients: Current State and Future Possibilities.

    Science.gov (United States)

    Johnson, Emilie K; Finlayson, Courtney; Rowell, Erin E; Gosiengfiao, Yasmin; Pavone, Mary Ellen; Lockart, Barbara; Orwig, Kyle E; Brannigan, Robert E; Woodruff, Teresa K

    2017-07-01

    This review provides an overview of pediatric fertility preservation. Topics covered include the patient populations who could benefit, the current state of fertility preservation options and research, and considerations related to ethics and program development. A broad Embase® and PubMed® search was performed to identify publications discussing investigational, clinical, ethical and health care delivery issues related to pediatric fertility preservation. Relevant publications were reviewed and summarized. Populations who could benefit from fertility preservation in childhood/adolescence include oncology patients, patients with nononcologic conditions requiring gonadotoxic chemotherapy, patients with differences/disorders of sex development and transgender individuals. Peripubertal and postpubertal fertility preservation options are well established and include cryopreservation of oocytes, embryos or sperm. Prepubertal fertility preservation is experimental. Multiple lines of active research aim to develop technologies that will enable immature eggs and sperm to be matured and used to produce a biological child in the future. Ethical challenges include the need for parental proxy decision making and the fact that fertility preservation procedures can be considered not medically necessary. Successful multidisciplinary fertility preservation care teams emphasize partnerships with adult colleagues, prioritize timely consultations and use standardized referral processes. Some aspects of fertility preservation are not covered by insurance and out-of-pocket costs can be prohibitive. Pediatric fertility preservation is an emerging, evolving field. Fertility preservation options for prepubertal patients with fertility altering conditions such as cancer and differences/disorders of sex development are currently limited. However, multiple lines of active research hold promise for the future. Key considerations include establishing a multidisciplinary team to provide

  3. Transcatheter Pulmonary Valve Replacement: Current State of Art.

    Science.gov (United States)

    Alkashkari, Wail; Alsubei, Amani; Hijazi, Ziyad M

    2018-03-15

    The past couple of decades have brought tremendous advances to the field of pediatric and adult congenital heart disease (CHD). Percutaneous valve interventions are now a cornerstone of not just the congenital cardiologist treating patients with congenital heart disease, but also-and numerically more importantly-for adult interventional cardiologists treating patients with acquired heart valve disease. Transcatheter pulmonary valve replacement (tPVR) is one of the most exciting recent developments in the treatment of CHD and has evolved to become an attractive alternative to surgery in patients with right ventricular outflow tract (RVOT) dysfunction. This review aims to summarize (1) the current state of the art for tPVR, (2) the expanding indications, and (3) the technological obstacles to optimizing tPVR. Since its introduction in 2000, more than ten thousands tPVR procedures have been performed worldwide. Although the indications for tPVR have been adapted earlier from those accepted for surgical intervention, they remain incompletely defined. The new imaging modalities give better assessment of cardiac anatomy and function and determine candidacy for the procedure. The procedure has been shown to be feasible and safe when performed in patients who received pulmonary conduit and or bioprosthetic valves between the right ventricle and the pulmonary artery. Fewer selected patients post trans-annular patch repair for tetralogy of Fallot may also be candidates for this technology. Size restrictions of the currently available valves limit deployment in the majority of patients post trans-annular patch repair. Newer valves and techniques are being developed that may help such patients. Refinements and further developments of this procedure hold promise for the extension of this technology to other patient populations.

  4. CRIMEAN TATAR FACTOR IN CRIMEA: THE CURRENT STATE AND PROSPECTS

    Directory of Open Access Journals (Sweden)

    D. A. Merenkov

    2017-01-01

    Full Text Available The article deals with the current situation of the Crimean Tatars in Crimea after joining Russia. It is considered a number of decisions taken by Russia, which changed the life of this national minority. For example, according an official status to the Crimean-Tatar language or improving living conditions in Crimean Tatars-populated areas. The article highlights the creation of the Spiritual Administration of Muslims of Crimea. The author describes the renewal of the mass media in Crimea and the creation of the TV and Radio company Millet instead of the Ukrainian TV channel ATR. The author stresses the difference in the approaches of the Ukrainian and Russian authorities to the question of the deportation of the Crimean Tatars in 1944. The article touches upon the UN General Assembly resolution A / RES / 71/205, 19 December 2016. It is devoted to “Situation of human rights in the Autonomous Republic of Crimea and the city of Sevastopol (Ukraine”. The author offers to get acquainted with the opinion of the Crimean Tatars, who live in Crimea at present, about their current situation after the reunification of Crimea and Sevastopol with Russia. It is analyzed the Ukrainian authorities’ policy on the Crimean Tatars. The author notes the negative effect of the Ukrainian authorities on radical feelings in Crimea. The process of forming these sentiments is considered in the article. The author notes the increased military activities by the illegal armed groups of the Crimean Tatars in the Ukrainian part of the Russian-Ukrainian state boundary. The article emphasizes the evaluation of the Crimean Tatars’ influence on security and stability on the peninsula, as well as the prospects of it. The author gives recommendations on the establishment of inter-ethnic relations, and notes that there is a potential for further development of inter-ethnic dialogue. The author concludes that the Crimean Tatars can act as a stabilizing and destabilizing

  5. Neutron star matter equation of state: current status and challenges

    Science.gov (United States)

    Ohnishi, Akira

    2014-09-01

    Neutron star matter has a variety of constituents and structures depending on the density; neutron-rich nuclei surounded by electrons and drip neutrons in the crust, pasta nuclei at the bottom of inner crust, and uniform isospin-asymmetric nuclear matter in a superfluid state in the outer core. In the inner core, the neutron Fermi energy becomes so large that exotic constituents such as hyperons, mesons and quarks may emerge. Radioactive beam and hypernuclear experiments provide information on the symmetry energy and superfluidity in the crust and outer core and on the hyperon potentials in the inner core, respectively. Cold atom experiments are also helpful to understand pure neutron matter, which may be simulated by the unitary gas. An equation of state (EOS) constructed based on these laboratory experiments has to be verified by the astronomical observations such as the mass, radius, and oscillations of neutron stars. One of the key but missing ingredients is the three-baryon interactions such as the hyperon-hyperon-nucleon (YYN) interaction. YYN interaction is important in order to explain the recently discovered massive neutron stars consistently with laboratory experiments. We have recently found that the ΛΛ interaction extracted from the ΛΛ correlation at RHIC is somewhat stronger than that from double Λ hypernuclei. Since these two interactions corresponds to the vacuum and in-medium ΛΛ interactions, respectively, the difference may tell us a possible way to access the YYN interaction based on experimental data. In the presentation, after a review on the current status of neutron star matter EOS studies, we discuss the necessary tasks to pin down the EOS. We also present our recent study of ΛΛ interaction from correlation data at RHIC.

  6. Computer-assisted Orthopaedic Surgery: Current State and Future Perspective

    Directory of Open Access Journals (Sweden)

    Guoyan eZheng

    2015-12-01

    Full Text Available Introduced about two decades ago, computer-assisted orthopaedic surgery (CAOS has emerged as a new and independent area, due to the importance of treatment of musculoskeletal diseases in orthopaedics and traumatology, increasing availability of different imaging modalities, and advances in analytics and navigation tools. The aim of this paper is to present the basic elements of CAOS devices and to review state-of-the-art examples of different imaging modalities used to create the virtual representations, of different position tracking devices for navigation systems, of different surgical robots, of different methods for registration and referencing, and of CAOS modules that have been realized for different surgical procedures. Future perspectives will also be outlined.

  7. Mixed arrays - problems with current methods and rules

    International Nuclear Information System (INIS)

    Mennerdahl, D.

    1987-01-01

    Simplified methods are used to control the criticality safety of mixed arrays (non-identical units) in storage or in transport. The basis for these methods is that the analyses of arrays of identical units are sufficient for drawing proper conclusions on mixed arrays. In a recent study of the rules for transport, two general flaws in such methods have been identified. One flaw is caused by increased neutron return rate to the central part of the array. The other flaw is caused by increased neutron coupling between two or more fissile units in an array. In both cases, replacement of fissile units with other units, which appear to be less reactive, can lead to criticality. This paper shows that the two flaws are common in also in current methods used for storage of fissile materials. (author)

  8. VALUATIONS OF CURRENT METHODS OF RELIGIOUS SLAUGHTER IN ITALY

    Directory of Open Access Journals (Sweden)

    B. Catanese

    2009-09-01

    Full Text Available The aim of this study is to estimate the scale of practices of religious slaughter and to evaluate current methods practiced in Italy. Three different approaches have been used to obtain data. Stunning before sticking is performed in 5,9% of small ruminants slaughtered according to Halal ritual. Hypothesis of violation of Dlgs 333/98 are discussed in the light of an improvement of religious slaughter practices in Italy.

  9. The current state of water resources of Transcarpathia

    Directory of Open Access Journals (Sweden)

    V. І. Nikolaichuk

    2015-07-01

    sanitary rules and regulations by the most of indicators of general health and specific indices. 19.0% of total water supply systems fail to meet the sanitary norms and regulations, in particular: 14.2% for the lack of sanitary protection zones; 1.9% because of unavailability of the necessary integrated treatment facilities, and 7.6% by the reason of absence of disinfecting plants. Possible ways of avoiding the depletion of water bodies are preventive water protection measures aimed at preventing or limiting pollution, water contamination and depletion; besides, it is necessary to educate people explaning them the current state and possible consequences of thoughtless water consumption.

  10. Ebola hemorrhagic Fever and the current state of vaccine development.

    Science.gov (United States)

    Hong, Joo Eun; Hong, Kee-Jong; Choi, Woo Young; Lee, Won-Ja; Choi, Yeon Hwa; Jeong, Chung-Hyeon; Cho, Kwang-Il

    2014-12-01

    Current Ebola virus outbreak in West Africa already reached the total number of 1,323 including 729 deaths by July 31st. the fatality is around 55% in the southeastern area of Guinea, Sierra Leone, Liberia, and Nigeria. The number of patients with Ebola Hemorrhagic Fever (EHF) was continuously increasing even though the any effective therapeutics or vaccines has not been developed yet. The Ebola virus in Guinea showed 98% homology with Zaire Ebola Virus. Study of the pathogenesis of Ebola virus infection and assess of the various candidates of vaccine have been tried for a long time, especially in United States and some European countries. Even though the attenuated live vaccine and DNA vaccine containing Ebola viral genes were tested and showed efficacy in chimpanzees, those candidates still need clinical tests requiring much longer time than the preclinical development to be approved for the practical treatment. It can be expected to eradicate Ebola virus by a safe and efficient vaccine development similar to the case of smallpox virus which was extinguished from the world by the variola vaccine.

  11. Herbal Supplements for Prostate Enlargement: Current State of the Evidence.

    Science.gov (United States)

    Nabavizadeh, Reza; Zangi, Mahdi; Kim, Michelle M; Yavari Bejestani, Maryam; Tabatabaei, Shahin

    2018-02-01

    To provide a comprehensive review of the current state of herbal supplement market for lower urinary tract symptoms (LUTS) and correlate the ingredients of each product with available scientific evidence. Twenty-seven products from Amazon.com that were advertised as herbal supplements for LUTS and had listed their active ingredients were selected. Active ingredients were reviewed on Google Scholar. Product price, warranty, and consumer review information were also collected. A total of 58 unique active ingredients were identified. The mean number of ingredients was 8.26 (standard deviation 5.25). Whereas 17 (63%) products had an ingredient with a systematic review to support their use, 20 (74%) had an ingredient with conflicting evidence based on systematic reviews. Out of the supplements that contained ingredients supported by literature, all (100%) products simultaneously had other ingredients with no, conflicting, or refuting evidence. There was no (0%) product that contained only scientifically proven ingredients. There is no scientific study to evaluate these supplements as a whole. Despite the widespread use of herbal supplements for LUTS, there is scant scientific evidence to support their safety and efficacy. Lack of adequate regulation and government support for research and development are some of the factors that disincentivize researchers to study safety and efficacy of these products. We encourage physicians to warn their patients on the lack of adequate evidence to support the safety and efficacy of many of these supplements. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Resistivity measurements using a direct current induction method (1963)

    International Nuclear Information System (INIS)

    Delaplace, J.; Hillairet, J.

    1964-01-01

    The conventional methods for measuring electrical resistivities necessitate the fixing of electrical contacts on the sample either mechanically or by soldering. Furthermore it is also necessary to carry,out the measurements on low cross-section samples which are not always easy to obtain. Our direct-current induction method on the other hand requires no contacts and can easily be applied to samples of large cross-section. The sample is placed in a uniform magnetic field; at the moment when the current is cut, eddy currents appear in the sample which tend to oppose the disappearance of the field. The way in which the magnetic flux decreases in the sample makes it possible to determine the resistivity of the material. This method has been applied to samples having diameters of between 1 and 30 mm in the case of metals which are good conductors. It gives a value for the local resistivity and makes it possible to detect any variation along a sample. The measurements can be carried out at all temperature from a few degrees absolute to 500 deg. C. We have used the induction method to follow the purification of beryllium by zone-melting; it is in effect possible to estimate the purity of a material by resistivity measurements. We have measured the resistivity along each bar treated by the zone-melting technique and have thus, localised the purest section. High temperature measurements have been carried out on uranium carbide and on iron-aluminium alloys. This method constitutes an interesting means of investigation the resistivity of solid materials. Its accuracy and rapidity make it particularly adapted both to fundamental research and to production control. (authors) [fr

  13. THE CURRENT METHODS FOR MOLECULAR DIAGNOSTICS OF FISH DISEASES (REVIEW

    Directory of Open Access Journals (Sweden)

    O. Zaloilo

    2016-06-01

    Full Text Available Purpose. The methods of molecular diagnostic (MMD gradually become widespread in modern fish farming. MMD contain a wide variety of specific approaches, each of which has distinct limits of their possible applications and is characterized by individual peculiarities in practical performance. In addition to high sensitivity and the possibility of rapid diagnostics, the main advantage of molecular methods is to determine the uncultivated infectious agents. DNA amplification allows identifying pathogenic microorganisms at very small quantities even in the minimum sample volume. Molecular methods of diagnostic enable the determination of infection in latent or acute phases. These methods allow showing the differences between pathogens with similar antigenic structures. The current literature data on this subject usually show a methodology in the narrow context of the tasks or practical results obtained through such approaches. Thus, a synthesis of existing information on the mechanisms of action and the limits of the typical problems of basic methods of molecular diagnostics are an urgent task of fish breeding. In particular, the following description will more effectively choose one or several approaches to identify pathogens in fish. Findings. This paper reviews the basic molecular methods that are used in the world's aquaculture for diagnosis of various diseases in commercial fish species. Originality. This work is a generalization of data on the principles and mechanisms for the implementation of diagnostics based on modern molecular techniques. For each of the mentioned approaches, the most promising areas of application were shown. The information is provided in the form of a comparative analysis of each methodology, indicating positive and negative practical aspects. Practical value. The current review of modern methods of molecular diagnostic in aquaculture is focused on practical application. Generalizing and analytical information can be

  14. Licensed pertussis vaccines in the United States. History and current state.

    Science.gov (United States)

    Klein, Nicola P

    2014-01-01

    The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that waning protection following licensed acellular pertussis vaccines have been significant factors in the widespread reappearance of pertussis.

  15. [Development and current situation of reconstruction methods following total sacrectomy].

    Science.gov (United States)

    Huang, Siyi; Ji, Tao; Guo, Wei

    2018-05-01

    To review the development of the reconstruction methods following total sacrectomy, and to provide reference for finding a better reconstruction method following total sacrectomy. The case reports and biomechanical and finite element studies of reconstruction following total sacrectomy at home and abroad were searched. Development and current situation were summarized. After developing for nearly 30 years, great progress has been made in the reconstruction concept and fixation techniques. The fixation methods can be summarized as the following three strategies: spinopelvic fixation (SPF), posterior pelvic ring fixation (PPRF), and anterior spinal column fixation (ASCF). SPF has undergone technical progress from intrapelvic rod and hook constructs to pedicle and iliac screw-rod systems. PPRF and ASCF could improve the stability of the reconstruction system. Reconstruction following total sacrectomy remains a challenge. Reconstruction combining SPF, PPRF, and ASCF is the developmental direction to achieve mechanical stability. How to gain biological fixation to improve the long-term stability is an urgent problem to be solved.

  16. The Current Mental State of School Students in Online Learning Conditions

    Directory of Open Access Journals (Sweden)

    Kovalevskaya E.V.,

    2015-08-01

    Full Text Available This article discusses the results of a study of actual mental state of high school students who are active subjects of career self-determination in terms of interactive learning. There are four groups of methods of interactive training: psychological training, art therapy, cognitive, and game training. The main task, which is solved by a researcher in a formative experiment with the use of each of these methods, is to establish significant differences in health, activity and mood as the indicators of current mental state of students in the classroom. As a result, we found that the most significant improvements in the current mental state takes place when using art and game therapy, so these techniques should be used in groups of students with low motivation to work, as well as in the adverse psychological climate. Less significant was the improvement of the current mental state after psychological training due to the fact that this method allow to update and seek solutions to the most important intrapersonal issues and require the implementation of a deeper reflection

  17. ANALYSIS OF THE CURRENT STATE OF INSURANCE MARKET IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Melnyk Olga

    2018-03-01

    Full Text Available Introduction. Modern insurance companies provide the formation of effective market mechanisms for attracting investment resources to the national economy through the effective functioning of the insurance market with the use of modern market infrastructure and financial instruments. In Ukraine, the insurance market has a significant development potential, which requires, first of all, a detailed assessment of all available opportunities for balanced development in the context of European integration processes. Therefore, the identification and analysis of modern trends in the development of the insurance market are relevant today from theoretical and practical points of view. The purpose of the study is to analyze the current state of the insurance market in Ukraine and determine the factors affecting the effectiveness of its activities. Results. It was defined that the insurance market is the second largest in terms of capitalization among other non-bank financial markets in Ukraine. The tendencies of changes in the main indicators of the insurance market activity, in particular regarding the number of concluded insurance contracts, insurance premiums and insurance payments, reinsurance, insurance reserves, insurers’ assets and authorized capital, were investigated. It was found that the increase in gross insurance premiums was made for almost all types of insurance, and the increase of gross insurance premiums was mainly due to auto insurance, medical insurance and financial risk insurance. Nowadays, the level of insurance penetration in Ukraine is still low. However, according to the Comprehensive Program for the Development of the Financial Sector of Ukraine, a gradual increase of this indicator is planned. Conclusions. The conducted studies indicate that the insurance market of Ukraine is at the stage of formation, gradually adapting to the requirements of European and world markets. In order to improve the situation, domestic insurers

  18. NOAA Historical Tidal Current Data for the Coastal United States

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Knowledge of the timing and strength of tidal currents is extremely important for safe navigation in coastal waters. Tidal currents are almost always the strongest...

  19. Study on model current predictive control method of PV grid- connected inverters systems with voltage sag

    Science.gov (United States)

    Jin, N.; Yang, F.; Shang, S. Y.; Tao, T.; Liu, J. S.

    2016-08-01

    According to the limitations of the LVRT technology of traditional photovoltaic inverter existed, this paper proposes a low voltage ride through (LVRT) control method based on model current predictive control (MCPC). This method can effectively improve the photovoltaic inverter output characteristics and response speed. The MCPC method of photovoltaic grid-connected inverter designed, the sum of the absolute value of the predictive current and the given current error is adopted as the cost function with the model predictive control method. According to the MCPC, the optimal space voltage vector is selected. Photovoltaic inverter has achieved automatically switches of priority active or reactive power control of two control modes according to the different operating states, which effectively improve the inverter capability of LVRT. The simulation and experimental results proves that the proposed method is correct and effective.

  20. Current Cigarette Smoking Among Adults - United States, 2016.

    Science.gov (United States)

    Jamal, Ahmed; Phillips, Elyse; Gentzke, Andrea S; Homa, David M; Babb, Stephen D; King, Brian A; Neff, Linda J

    2018-01-19

    The U.S. Surgeon General has concluded that the burden of death and disease from tobacco use in the United States is overwhelmingly caused by cigarettes and other combusted tobacco products (1). Cigarettes are the most commonly used tobacco product among U.S. adults, and about 480,000 U.S. deaths per year are caused by cigarette smoking and secondhand smoke exposure (1). To assess progress toward the Healthy People 2020 target of reducing the proportion of U.S. adults aged ≥18 years who smoke cigarettes to ≤12.0% (objective TU-1.1),* CDC analyzed data from the 2016 National Health Interview Survey (NHIS). In 2016, the prevalence of current cigarette smoking among adults was 15.5%, which was a significant decline from 2005 (20.9%); however, no significant change has occurred since 2015 (15.1%). In 2016, the prevalence of cigarette smoking was higher among adults who were male, aged 25-64 years, American Indian/Alaska Native or multiracial, had a General Education Development (GED) certificate, lived below the federal poverty level, lived in the Midwest or South, were uninsured or insured through Medicaid, had a disability/limitation, were lesbian, gay, or bisexual (LGB), or had serious psychological distress. During 2005-2016, the percentage of ever smokers who quit smoking increased from 50.8% to 59.0%. Proven population-based interventions are critical to reducing the health and economic burden of smoking-related diseases among U.S. adults, particularly among subpopulations with the highest smoking prevalences (1,2).

  1. Pediatric digital radiography education for radiologic technologists: current state

    International Nuclear Information System (INIS)

    Morrison, Gregory; Culbertson, John; Carbonneau, Kira; John, Susan D.; Goske, Marilyn J.; Smith, Susan N.; Charkot, Ellen; Herrmann, Tracy

    2011-01-01

    Digital radiography (DR) is one of several new products that have changed our work processes from hard copy to digital formats. The transition from analog screen-film radiography to DR requires thorough user education because of differences in image production, processing, storage and evaluation between the forms of radiography. Without adequate education, radiologic technologists could unknowingly expose children to higher radiation doses than necessary for adequate radiograph quality. To evaluate knowledge about image quality and dose management in pediatric DR among radiologic technologists in the U.S. This communication describes a survey of 493 radiologic technologists who are members of the American Society of Radiologic Technologists (ASRT) and who evaluated the current state of radiological technologist education in image quality and dose management in pediatric DR. The survey included 23 survey questions regarding image acquisition issues, quality assurance, radiation exposure and education in DR of infants and children. Radiologic technologists express many needs in areas of training and education in pediatric DR. Suggested improvements include better tools for immediate feedback about image quality and exposure, more information about appropriate technique settings for pediatric patients, more user-friendly vendor manuals and educational materials, more reliable measures of radiation exposure to patients, and more regular and frequent follow-up by equipment vendors. There is a clear and widespread need for comprehensive and practical education in digital image technology for radiologic technologists, especially those engaged in pediatric radiography. The creation of better educational materials and training programs, and the continuation of educational opportunities will require a broad commitment from equipment manufacturers and vendors, educational institutions, pediatric radiology specialty organizations, and individual imaging specialists. (orig.)

  2. Welfare state: Milestones of development and the current status

    Directory of Open Access Journals (Sweden)

    D A Zakharyan

    2016-12-01

    Full Text Available The article describes the evolution of ideas about the social state as a fair state based on the concept of the social contract. L. von Stein argues that the purpose of the welfare state was not changing the class structure of society and the elimination of the contradictions between the classes, but rather balancing and minimizing conflicts with the help of property transformations allowing a person to change one’s class affiliation. The main condition for the existence of the welfare state is its policies compliance with the interests of citizens, which provides political stability and social security. The central idea of the welfare constitutional state is that the rights of citizens are guaranteed by the state. The functions of the state and its social responsibilities were transforming over time mainly due to the erosion of state, private and corporate responsibility for providing social services. In most cases, the social programs are developed by the state, but they can also be provided by commercial organizations in the “consumer society”, in which all things and services have a material value and benefit. The welfare state is based on the principle of social justice in the distribution of wealth among the population, thus, every democratic state seeks to become a welfare state, which implies a high level of confidence in the government.

  3. The French Accelerometer Network (RAP): Current state in 2007

    International Nuclear Information System (INIS)

    Gueguen, P.; Bard, P.-Y.; Pequegnat, C.; Souriau, A.; Dominique, P.; Regnier, M.

    2007-01-01

    France is a country of moderate seismicity but, due to dense urbanized and industrial areas, the seismic risk is significant. Furthermore, recent developments in numerical and semi-empirical methods requires a good knowledge of several parameters. The mission of the French accelerometer network programme (RAP-Reseau Accelerometrique Permanent) is to expand and modernize significantly the acquisition and application of French accelerometer data (both strong and weak motion) in order to improve earthquake related research and public safety from earthquakes. This network is the result of co-operative efforts including academic institutions (INSU-CNRS, Universities of Grenoble, Nice, Strasbourg, Toulouse, IPG Paris) and several state agencies (BRGM, CEA, IRSN, LCPC). Since 1995, around 120 stations have been installed in some seismic areas of France. This network also includes specific research actions (site effects, building monitoring, deep borehole). Other French accelerometer stations devoted to strong motion recording are also associated to the network. All data are archived and freely distributed in a database center, data being available in SAC, ASCII and SEED format. (authors)

  4. Current Human Reliability Analysis Methods Applied to Computerized Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring

    2012-06-01

    Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no US nuclear power plant has implemented CPs in its main control room (Fink et al., 2009). Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of enhanced ease of use and easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

  5. Thermally stimulated current method applied to highly irradiated silicon diodes

    CERN Document Server

    Pintilie, I; Pintilie, I; Moll, Michael; Fretwurst, E; Lindström, G

    2002-01-01

    We propose an improved method for the analysis of Thermally Stimulated Currents (TSC) measured on highly irradiated silicon diodes. The proposed TSC formula for the evaluation of a set of TSC spectra obtained with different reverse biases leads not only to the concentration of electron and hole traps visible in the spectra but also gives an estimation for the concentration of defects which not give rise to a peak in the 30-220 K TSC temperature range (very shallow or very deep levels). The method is applied to a diode irradiated with a neutron fluence of phi sub n =1.82x10 sup 1 sup 3 n/cm sup 2.

  6. Critical-state model for the determination of critical currents in disk-shaped superconductors

    International Nuclear Information System (INIS)

    Frankel, D.J.

    1979-01-01

    A series of experiments has been carried out on the flux trapping and shielding capabilities of a flat strip of Nb-Ti/Cu composite material. A circular piece of material from the strip was tested in a uniform field directed perpendicularly to the surface of the sample. Profiles of the normal component of the field along the sample diameter were measured. The critical-state model was adapted for this geometry and proved capable of reproducing the measured field profiles. Model curves agreed well with experimental field profiles generated when the full sample was in the critical state, when only a portion of the sample was in the critical state, and when profiles were obtained after the direction of the rate change of the magnetic field was reversed. The adaption of the critical-state model to disk geometry provides a possible method either to derive values of the critical current from measurements of field profiles above thin flat samples, or to predict the trapping and shielding behavior of such samples if the critical current is already known. This method of determining critical currents does not require that samples be formed into narrow strips or wires, as is required for direct measurements of J/sub c/, or into tubes or cylinders, as is usually required for magnetization-type measurements. Only a relatively small approximately circular piece of material is needed. The method relies on induced currents, so there is no need to pass large currents into the sample. The field-profile measurements are easily performed with expensive Hall probes and do not require detection of the resistive transition of the superconductor

  7. Innovations in electrophoretic deposition: Alternating current and pulsed direct current methods

    International Nuclear Information System (INIS)

    Chávez-Valdez, Alejandra; Boccaccini, Aldo R.

    2012-01-01

    This review summarizes emerging developments in the field of alternating current (AC) and pulsed direct current (DC) electrophoretic deposition (EPD) in aqueous or organic media. Numerous applications of AC-EPD are discussed including two major groups of investigations: (i) AC-EPD to suppress water hydrolysis at high voltages in inorganic (ceramic) coatings and (ii) AC-EPD for deposition of biological entities. The deposition, purification and manipulation of carbon nanotubes and nanoparticles by AC-EPD to form specific arrays, for development of sensors and other electronic devices and the application of AC-EPD as method for separation of particles according to their shape or size are also presented. Other applications reviewed relate to the fabrication by AC-EPD of toxic gas sensors from oxides and superconducting layers. The main materials being examined by AC-EPD are inorganic, including carbon nanotubes, TiO 2 nanoparticles, Al 2 O 3 , Si, SnO 2 , ZnO and WO 3 and biological entities, e.g. bacteria cells. For pulsed EPD, the applications reviewed are divided in pulsed current and pulsed voltage EPD. Among the applications of pulsed EPD, the formation of thick films from aqueous suspensions without water decomposition, the fabrication of multilayer and composite materials and the size-selective deposition of ceramic nanoparticles are the most important investigated to date, based on the quality of the coatings and deposits obtained and their relevance for applications.

  8. Modified method of perturbed stationary states. I

    International Nuclear Information System (INIS)

    Green, T.A.

    1978-10-01

    The reaction coordinate approach of Mittleman is used to generalize the method of Perturbed Stationary States. A reaction coordinate is defined for each state in the scattering expansion in terms of parameters which depend on the internuclear separation. These are to be determined from a variational principle described by Demkov. The variational result agrees with that of Bates and McCarroll in the limit of separated atoms, but is generally different elsewhere. The theory is formulated for many-electron systems, and the construction of the scattering expansion is discussed for simple one-, two-, and three-electron systsm. The scattering expansion and the Lagrangian for the radial scattering functions are given in detail for a heteronuclear one-electron system. 2 figures

  9. [Methods and Applications of Psychological Stress State Assessment].

    Science.gov (United States)

    Li, Xin; Yang, Yadan; Hou, Yongjie; Chen, Zetao

    2015-08-01

    In this paper, the response of individual's physiological system under psychological stress state is discussed, and the theoretical support for psychological stress assessment research is provided. The two methods, i.e., the psychological stress assessment of questionnaire and physiological parameter assessment used for current psychological stress assessment are summarized. Then, the future trend of development of psychological stress assessment research is pointed out. We hope that this work could do and provide further support and help to psychological stress assessment studies.

  10. Electronic States and Persistent Currents in Nanowire Quantum Ring

    Science.gov (United States)

    Kokurin, I. A.

    2018-04-01

    The new model of a quantum ring (QR) defined inside a nanowire (NW) is proposed. The one-particle Hamiltonian for electron in [111]-oriented NW QR is constructed taking into account both Rashba and Dresselhaus spin-orbit coupling (SOC). The energy levels as a function of magnetic field are found using the exact numerical diagonalization. The persistent currents (both charge and spin) are calculated. The specificity of SOC and arising anticrossings in energy spectrum lead to unusual features in persistent current behavior. The variation of magnetic field or carrier concentration by means of gate can lead to pure spin persistent current with the charge current being zero.

  11. [Current state of blood transfusion in Yugoslavia and its perspectives].

    Science.gov (United States)

    Bosković, S

    1975-01-01

    The current situation of the transfusion service in this country has been characterised by small-scale operational level, the lack of regional system and basic components of a single service. There is a great variety in the medical and expert point of view starting from the lack of elementary hygienic and technical conditions, down to developed institutions of the European level. This activity has been characterised for the last ten years or so by an effort to win blood-givers at all cost, to enhance production of intravenous solutions which in some factories have obtained factory production volume, to determine basic blood groups and a very modest diagnostics for haemolitic diseases of newly born children. A large number of doctors--transfusiologists have obtained specialists' titles, but without any prospects to change the present status of their work: blood conservation, efforts to win blood-givers and determine blood groups. The differentiation between transfusiologists and clinic-engaged personnel has been increasing, thus making the transfusiologists to be far from the problems of modern haematology and clinical therapy. Observing the situation and status of transfusiology in the developed countries of Western Europe, it is possible to state that the transfusiology is developing in the direction of cooperation and team-work with doctors engaged in clinics. Therefore, cooperation with doctors engaged in clinics should be cultivated and organise team work. The intermediary role of doctors-transfusiologist in the cycle of health improvement should be avoided by all means. 90% of packed blood in this country is consumed in the form of full blood or dry plasma and only 10% in the form of desired derivatives, instead of the contrary case, since the precisely set therapy using new haemostatic medicaments is an economical imperative. The electronic data processing of blood-givers enables doctors-transfusiologists to deal with these problems since this is much cheaper

  12. Current state of continuous ambulatory peritoneal dialysis in Egypt

    Directory of Open Access Journals (Sweden)

    Khaled Mohamed Amin Elzorkany

    2017-01-01

    Full Text Available Patients with end-stage renal disease (ESRD continue to increase in number worldwide, especially in developing countries. Although continuous ambulatory peritoneal dialysis (CAPD has comparable survival advantages as hemodialysis (HD, it is greatly underutilized in many regions worldwide. The prevalence of use of CAPD in Egypt is 0.29/million population in 2017. The aim of this study is to describe the current state and practice of CAPD in Egypt and included 22 adult patients who were treated by CAPD. All the study patients were switched to CAPD after treatment with HD failed due to vascular access problems. Patients were mainly female (68.2 % with the mean age of 49.77 ± 11.41 years. The average duration on CAPD was 1.76 ± 1.30 years. Hypertension was the main cause of end-stage renal disease (ESRD constituting 36.4%, followed by diabetes (27.3 %, and toxic nephropathy (4.5%. Of importance is that about 31.8% of patients had ESRD of unknown etiology. The mean weekly Kt/V urea of patients on PD was 1.92 ± 0.18. The mean hemoglobin, serum calcium, phosphorus, parathormone, and albumin levels were 10.27 ± 1.98 g/dL, 8.36 ± 1.19 mg/dL, 5.70 ± 1.35 mg/dL, 541.18 ± 230.12 pg/mL, and 2.98 ± 0.73 g/dL, respectively. There was no significant difference between diabetic and nondiabetic CAPD patients regarding demographic and laboratory data. Our data indicate that there is continuing underutilization of CAPD in Egypt which may be related to nonavailability of CAPD fluid, patient factors (education and motivation, gradual decline of the efficiency of health-care professionals, and lack of a national program to start PD as the first modality for renal replacement therapy. It is advised to start an organized program to make CAPD widespread and encourage local production of PD fluids to reduce the cost of CAPD.

  13. Corporatism In Western Europe: Current State And Prospects For Evolution

    Directory of Open Access Journals (Sweden)

    Р. Ja. Feldman

    2018-01-01

    Full Text Available The article conducts a political analysis of the Western European institutions of corporatism. The main task of the author is the study of the policy of harmonizing the interests of labor and capital (trade unions and employers’ associations, which is implemented in countries such as the UK, Germany, France, Italy, Norway, Sweden, Denmark etc. Dynamics of political processes unfolding in the space of Western Europe, suggests that the mechanisms of articulation and political representation of social and labour interests have significantly transformed over the past 30 years. The use of institutional and systemic approaches along with the empirical methods, leads to the conclusion that the most developed European countries are moving from the classical model of corporatism to a more pluralistic forms of interaction between the state, labour and capital. Social partnership as an instrument of collective bargaining between employees and employers is displaced from the political sphere to the sectoral and organizational levels. The typical institutions of democratic corporatism (tripartite commissions, socio-economic councils, etc., who played a crucial role in rebuilding post-war Europe, become rudimentary organs of the national political systems. In addition, there is a tendency to weaken the political influence of trade unions, who successfully struggled for the satisfaction of collective demands of workers in the beginning of XX century. Large multinational companies prefer to influence the political decision-making centers autonomously, ignoring the associative membership in the guild organizations. As a consequence, corporatist bargaining is being replaced by direct and indirect lobbying, Government Relations and election fundraising. When accounting for identified trends, the author presents a hypothesis that the evolution of corporatism in Western Europe will lead to its gradual degeneration. Taking into account the identified trends, the

  14. System and method for quench and over-current protection of superconductor

    Science.gov (United States)

    Huang, Xianrui; Laskaris, Evangelos Trifon; Sivasubramaniam, Kiruba Haran; Bray, James William; Ryan, David Thomas; Fogarty, James Michael; Steinbach, Albert Eugene

    2005-05-31

    A system and method for protecting a superconductor. The system may comprise a current sensor operable to detect a current flowing through the superconductor. The system may comprise a coolant temperature sensor operable to detect the temperature of a cryogenic coolant used to cool the superconductor to a superconductive state. The control circuit is operable to estimate the superconductor temperature based on the current flow and the coolant temperature. The system may also be operable to compare the estimated superconductor temperature to at least one threshold temperature and to initiate a corrective action when the superconductor temperature exceeds the at least one threshold temperature.

  15. Current drive efficiency requirements for an attractive steady-state reactor

    Energy Technology Data Exchange (ETDEWEB)

    Tonon, G

    1994-12-31

    The expected values of the figure of merit and the electrical efficiency of various non-inductive current drive methods are considered. The main experimental results achieved today with neutral beams and radiofrequency systems are summarized. Taking into account the simplified energy flow diagram of a steady state reactor, the figure of merit and the electrical efficiency values which are necessary in order to envisage an attractive steady-state reactor are determined. These values are compared to the theoretical predictions. (author). 16 refs., 11 figs., 2 tabs.

  16. Current State-of-the-Art MRI for Comprehensive Evaluation of Potential Living Liver Donors.

    Science.gov (United States)

    Jhaveri, Kartik S; Guo, Lijun; Guimarães, Luís

    2017-07-01

    This review focuses on the role of state-of-the-art MRI-based techniques for comprehensive evaluation of living donors providing single-visit assessment of the liver vasculature via MR angiography, of the biliary tract via conventional T2-weighted MR cholangiography and T1-weighted gadoxetate disodium-enhanced MR cholangiography, and of hepatic steatosis via T2*-corrected multiecho chemical shift-based water-fat separation MRI and high-speed T2-corrected multiecho MR spectroscopy. By using current state-of-the-art techniques, MRI can provide a one-stop-shop method for evaluation of the potential living liver donors.

  17. Current drive efficiency requirements for an attractive steady-state reactor

    International Nuclear Information System (INIS)

    Tonon, G.

    1994-01-01

    The expected values of the figure of merit and the electrical efficiency of various non-inductive current drive methods are considered. The main experimental results achieved today with neutral beams and radiofrequency systems are summarized. Taking into account the simplified energy flow diagram of a steady state reactor, the figure of merit and the electrical efficiency values which are necessary in order to envisage an attractive steady-state reactor are determined. These values are compared to the theoretical predictions. (author). 16 refs., 11 figs., 2 tabs

  18. Review of the current state of UAV regulations

    NARCIS (Netherlands)

    Stöcker, Elvira Claudia; Bennett, Rohan; Nex, Francesco; Gerke, Markus; Zevenbergen, Jaap

    2017-01-01

    UAVs-unmanned aerial vehicles-facilitate data acquisition at temporal and spatial scales that still remain unachievable for traditional remote sensing platforms. However, current legal frameworks that regulate UAVs present significant barriers to research and development. To highlight the

  19. Biotechnological uses of Azotobacter vinelandii : Current state, limits ...

    African Journals Online (AJOL)

    African Journal of Biotechnology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 33 (2010) >. Log in or Register to get access to full text downloads.

  20. Current State of the U.S. Ethanol Industry

    Energy Technology Data Exchange (ETDEWEB)

    Urbanchuk, John [Cardno ENTRIX, New Castle, DE (United States)

    2010-11-30

    The objective of this study is to provide a comprehensive overview of the state of the U.S. ethanol industry and to outline the major forces that will affect the development of the industry over the next decade.

  1. Cost comparison between Subterrene and current tunneling methods. Final report

    International Nuclear Information System (INIS)

    Bledsoe, J.D.; Hill, J.E.; Coon, R.F.

    1975-05-01

    A study was made to compare tunnel construction costs between the Subterrene tunneling system and methods currently in use. Three completed tunnels were selected for study cases to represent finished diameters ranging from 3.05 meters (10 feet) to 6.25 meters (20.5 feet). The study cases were normalized by deleting extraneous work and assigning labor, equipment, and materials costs for the Southern California area in 1974. Detailed cost estimates (shown in Appendix A) were then made for the three tunnels for baseline. A conceptual nuclear powered Subterrene tunneling machine (NSTM) was designed. It was assumed that NSTM's were available for each of the three baseline tunnels. Costs were estimated (shown in Appendix B) for the baseline tunnels driven by NSTM

  2. BIOFEEDBACK AS A METHOD FOR STUDENTS’ MENTAL STATE ASSESSMENT

    Directory of Open Access Journals (Sweden)

    M. Yu. Ababkova

    2017-01-01

    Full Text Available Introduction. Neurotechnologies based on the principles of a nervous system functioning are being introduced into modern educational process more and more actively. Neurotechnology-based devices give the chance to develop new educational products; to enlarge the content of education by means of transition from text, graphic and sound content filling of educational process to use of tactile, motor, emotional, and other content. One of the most perspective neurotechnologies for the field of education is the method of biofeedback (BF which enables to define students’ mental state, change various physiological processes proceeding from the obtained data, correct educational process, and improve its quality and effectiveness.The aim of the present publication is to identify the opportunities of the biofeedback method application for educational purposes.Methodology and research methods. A pilot study on the basis of biofeedback technique was conducted in order to study the influence of active learning methods on students’ mental state mastering in specialty “Advertising and Public Relations”. H. Eysenck’s PEN Model was used to form focus-groups (control and experimental; psychophysiological technique CMS (Current Mental State was applied for results processing. Also, such methods as comparative analysis, induction and generalization were used.Results. A true picture of psychological attributes of students’ mental condition has been received for efficient studying of the current psychological state on psychophysiological functions, and training active methods impact on a condition of mentality of students according to the results of cardiorhythmogram.The main results of a pilot research were quantitative data (as percentage points of the current mental and psychological conditions of examinees. The obtained results have reflected the degree of attributes manifestation such as general adaptive resource, degree of mobility (lability of

  3. Findings from analysing and quantifying human error using current methods

    International Nuclear Information System (INIS)

    Dang, V.N.; Reer, B.

    1999-01-01

    In human reliability analysis (HRA), the scarcity of data means that, at best, judgement must be applied to transfer to the domain of the analysis what data are available for similar tasks. In particular for the quantification of tasks involving decisions, the analyst has to choose among quantification approaches that all depend to a significant degree on expert judgement. The use of expert judgement can be made more reliable by eliciting relative judgements rather than absolute judgements. These approaches, which are based on multiple criterion decision theory, focus on ranking the tasks to be analysed by difficulty. While these approaches remedy at least partially the poor performance of experts in the estimation of probabilities, they nevertheless require the calibration of the relative scale on which the actions are ranked in order to obtain the probabilities of interest. This paper presents some results from a comparison of some current HRA methods performed in the frame of a study of SLIM calibration options. The HRA quantification methods THERP, HEART, and INTENT were applied to derive calibration human error probabilities for two groups of operator actions. (author)

  4. Business process compliance checking : current state and future challenges

    NARCIS (Netherlands)

    El Kharbili, M.; Alves De Medeiros, A.K.; Stein, S.; Aalst, van der W.M.P.; Loos, P.; Nüttgens, M.; Turowski, K.; Werth, D.

    2008-01-01

    Regulatory compliance sets new requirements for business process management (BPM). Companies seek to enhance their corporate governance processes and are required to put in place measures for ensuring compliance to regulations. In this sense, this position paper (i) reviews the current work in the

  5. Methodological Approaches in Conducting Overviews: Current State in HTA Agencies

    Science.gov (United States)

    Pieper, Dawid; Antoine, Sunya-Lee; Morfeld, Jana-Carina; Mathes, Tim; Eikermann, Michaela

    2014-01-01

    Objectives: Overviews search for reviews rather than for primary studies. They might have the potential to support decision making within a shorter time frame by reducing production time. We aimed to summarize available instructions for authors intending to conduct overviews as well as the currently applied methodology of overviews in…

  6. The Current Status of Medical Marijuana in the United States

    OpenAIRE

    McKenna, Gerald J

    2014-01-01

    Medical marijuana is currently a controversial issue in medicine. There are strong pro and con opinions but relatively little scientific data on which to base medical decisions. The unfortunate scheduling of marijuana in class I has limited research and only serves to fuel the controversy.

  7. Current state of the art of HNF based composite propellants

    NARCIS (Netherlands)

    Ciucci, A.; Frota, O.; Welland, W.H.M.; Heijden, A.E.D.M. van der; Leeming, B.; Bellerby, J.M.; Brotzu, A.

    2004-01-01

    The main activities currently performed for the development of HNF-based propellants are presented. The objectives and approach adopted are described. The results obtained on the HNF decomposition mechanism and on the re- and co-crystallisation of HNF with potential propellant ingredients are

  8. Solid state dye-sensitized solar cells. Current state of the art. Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Lenzmann, F.O.; Olson, C.L.; Goris, M.J.A.A.; Kroon, J.M. [ECN Solar Energy, Petten (Netherlands)

    2008-09-15

    The first generation of dye-sensitized solar cell technology is based on a liquid electrolyte component. Today, this technology is on the verge of commercialization. The step towards the market and real applications is supported by the prospect of low manufacturing costs, good efficiency as well as the expectation that the current stability level of this technology is at least sufficient for applications in mobile electronics. These favorable developments may be reinforced and accelerated even further, if the corrosive liquid electrolyte could be replaced by a non-corrosive solid, since this would ease a number of stringent requirements in the production process. A successful exchange of the liquid electrolyte by a solid-state holeconductor requires to at least maintain, preferably improve, the most relevant technical parameters of the solar cell (efficiency, stability, cost). First pioneering work with solid-state hole conductors was carried out 10 years ago with an initial efficiency level below 1%. Until 2007, the record efficiency could be improved to 5%. This paper gives an overview of the solid-state concept as an early stage approach with good perspectives for the mid-term future (5-10 years)

  9. The Current State Of Secondary Resource Usage In Ukraine

    OpenAIRE

    Julia Makovetska

    2011-01-01

    The state and the perspectives of the development of secondary resource usage in Ukraine have been analyzed in the article. The level of the main types recyclable materials as paper and cardboard, glass, plastics, waste tires are considered. Priority directions of development of the secondary resources usage have been defined.

  10. English Learners with Learning Disabilities: What Is the Current State?

    Science.gov (United States)

    Rodríguez, Ashley; Rodríguez, Diane

    2017-01-01

    As the demographics across the United States continues to change, specifically with increases in school age English Learners who speak a home language other than English, it is imperative that schools meet the diverse needs of these children. This article summarizes studies about English Learners with learning disabilities. It reports on the…

  11. The current state and trends of the development of universities in Ukraine

    Directory of Open Access Journals (Sweden)

    O.B. Morhulets

    2015-09-01

    Full Text Available Education is the basis of social, political, economic, spiritual, and cultural development. Therefore, the study of the current state and trends of the development of Ukrainian universities is a significant factor of social and economic progress of the country.The paper reflects the general state of universities in Ukraine, in particular, the trends in dynamics: the number of students in terms of entry/graduation, sources of financing, education fields; the number of universities in the context of accreditation, types and forms of ownership; the number of outbound Ukrainian and inbound foreign students; quantitative and qualitative characteristics of teaching staff; spending on higher education and the cost of funding per student compared with other countries. The purpose of the study is the assessment of economic activity of higher educational establishments in Ukraine, the identification of problems and tendencies of their development in the context of national transformational processes in education and formation of the society of knowledge. The methodical base used in the study is analysis and synthesis, methods of comparison and generalization, extrapolation, index and graphical methods. The practical value of the study is based on the results of a thorough analysis of university activities. Such results reveal the current state and trends of the development of universities under conditions of higher education transformation in Ukraine and its integration into the European educational area. The results of research improve understanding of the state and problems of the universities and provide the foundations for further research in the field of the national education system development and for improving of the quality of young professionals’ training. The trends of the university development indicate that the reorganization of higher education which is being currently taken place, already results in the emergence of new competencies of

  12. The current state of FPGA technology in the nuclear domain

    Energy Technology Data Exchange (ETDEWEB)

    Ranta, J.

    2012-07-01

    Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

  13. Current State of the Art Historic Building Information Modelling

    Science.gov (United States)

    Dore, C.; Murphy, M.

    2017-08-01

    In an extensive review of existing literature a number of observations were made in relation to the current approaches for recording and modelling existing buildings and environments: Data collection and pre-processing techniques are becoming increasingly automated to allow for near real-time data capture and fast processing of this data for later modelling applications. Current BIM software is almost completely focused on new buildings and has very limited tools and pre-defined libraries for modelling existing and historic buildings. The development of reusable parametric library objects for existing and historic buildings supports modelling with high levels of detail while decreasing the modelling time. Mapping these parametric objects to survey data, however, is still a time-consuming task that requires further research. Promising developments have been made towards automatic object recognition and feature extraction from point clouds for as-built BIM. However, results are currently limited to simple and planar features. Further work is required for automatic accurate and reliable reconstruction of complex geometries from point cloud data. Procedural modelling can provide an automated solution for generating 3D geometries but lacks the detail and accuracy required for most as-built applications in AEC and heritage fields.

  14. The current state of FPGA technology in the nuclear domain

    International Nuclear Information System (INIS)

    Ranta, J.

    2012-01-01

    Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

  15. Current environmental situation in the new Federal States. Pt. 1

    International Nuclear Information System (INIS)

    Haury, H.J.; Koller, U.; Assmann, G.

    1992-01-01

    'Information on Environment' organised the first part of a seminar for jounalists on the present environmental situation in the now federal states in Berlin on the 3rd and 4th of December. More than 50 participants from radios, TV, daily and special press attended this ninth event of 'Information on Environment' in Berlin. Leading scientists from research institutes of the former GDR, the Federal Environmental Agency and the GSF-research centre for environment and heath gave papers on the predominant environmental problems in the new federal states. This first part deals with water pollution, waste water treatment, drinking water supply, environmental problems of lignite mining, radiation pollution in the Erzgebirge; forest damage research and special armament wastes and waste problems in general. (orig.) [de

  16. Terminology of economics in Albanian: Current state, problems and tasks

    OpenAIRE

    Mulaj, Isa

    2012-01-01

    The primary aim of this paper was to analyze the state of terminology of economics in Albanian language, and depending on the problems identified, to address some recommendations as tasks that are deemed necessary for future research that would contribute to its standardization. The paper begun from the hypothesis that the terminology in question is relatively rich, but finds that academic and scientific research are very limited or largely neglected, thus creating a vacuum in its broader and...

  17. Humble beginnings: Current trends, state perspectives, and hallmarks of humility

    OpenAIRE

    Chancellor, J; Lyubomirsky, S

    2013-01-01

    After decades of neglect, research in humility is finally turning a corner. Within the past few years, investigators have articulated two promising strategies to overcome methodological concerns - namely, using personality judgments and designing humility "stress tests" to elicit humility-relevant behavior. We also highlight an alternative perspective of humility that has not yet gained much attention: the investigation of humility as a state, which helps to understand what humility actually ...

  18. Current perspectives on genetically modified crops and detection methods.

    Science.gov (United States)

    Kamle, Madhu; Kumar, Pradeep; Patra, Jayanta Kumar; Bajpai, Vivek K

    2017-07-01

    Genetically modified (GM) crops are the fastest adopted commodities in the agribiotech industry. This market penetration should provide a sustainable basis for ensuring food supply for growing global populations. The successful completion of two decades of commercial GM crop production (1996-2015) is underscored by the increasing rate of adoption of genetic engineering technology by farmers worldwide. With the advent of introduction of multiple traits stacked together in GM crops for combined herbicide tolerance, insect resistance, drought tolerance or disease resistance, the requirement of reliable and sensitive detection methods for tracing and labeling genetically modified organisms in the food/feed chain has become increasingly important. In addition, several countries have established threshold levels for GM content which trigger legally binding labeling schemes. The labeling of GM crops is mandatory in many countries (such as China, EU, Russia, Australia, New Zealand, Brazil, Israel, Saudi Arabia, Korea, Chile, Philippines, Indonesia, Thailand), whereas in Canada, Hong Kong, USA, South Africa, and Argentina voluntary labeling schemes operate. The rapid adoption of GM crops has increased controversies, and mitigating these issues pertaining to the implementation of effective regulatory measures for the detection of GM crops is essential. DNA-based detection methods have been successfully employed, while the whole genome sequencing using next-generation sequencing (NGS) technologies provides an advanced means for detecting genetically modified organisms and foods/feeds in GM crops. This review article describes the current status of GM crop commercialization and discusses the benefits and shortcomings of common and advanced detection systems for GMs in foods and animal feeds.

  19. The History of Liquid Ear Acupuncture and the Current Scientific State of the Art

    Directory of Open Access Journals (Sweden)

    Daniela Litscher

    2016-06-01

    Full Text Available This short review article presents a current overview of existing publications and scientific results regarding liquid (ear acupuncture. The injection of liquids into defined acupuncture points of the ear is not a method commonly used in the Western world. The term liquid acupuncture has different definitions, which makes understanding each definition and differentiating one from the other difficult. General terms like pharmacopuncture, homeosiniatry, and liquid acupuncture, which all describe the method of injecting different kinds of drugs into a defined body acupuncture point, are used. This article presents the history of liquid acupuncture, as well as the current scientific state of the art, from the point of view of two European researchers. Some articles are discussed and a few practical examples are presented.

  20. Laboratory diagnosis of Lyme borreliosis: Current state of the art and future perspectives.

    Science.gov (United States)

    Lohr, Benedikt; Fingerle, Volker; Norris, Douglas E; Hunfeld, Klaus-Peter

    2018-06-01

    This review is directed at physicians and laboratory personnel in private practice and clinics who treat and diagnose Lyme borreliosis (LB) in patients as part of their daily work. A major objective of this paper is to bring together background information on Borrelia (B.) burgdorferi sensu lato (s.l.) and basic clinical knowledge of LB, which is one of the most frequently reported vector-borne diseases in the Northern Hemisphere. The goal is to provide practical guidance for clinicians and for laboratory physicians, and scientists for a better understanding of current achievements and ongoing obstacles in the laboratory diagnosis of LB, an infectious disease that still remains one of the diagnostic chameleons of modern clinical medicine. Moreover, in bringing together current scientific information from guidelines, reviews, and original papers, this review provides recommendations for selecting the appropriate tests in relation to the patient's stage of disease to achieve effective, stage-related application of current direct and indirect laboratory methods for the detection of B. burgdorferi s.l. Additionally, the review aims to discuss the current state of the art concerning the diagnostic potential and limitations of the assays and test methods currently in use to optimize LB patient management and provide insight into the possible future prospects of this rapidly changing area of laboratory medicine.

  1. The current state of bearing surfaces in total hip replacement.

    Science.gov (United States)

    Rajpura, A; Kendoff, D; Board, T N

    2014-02-01

    We reviewed the literature on the currently available choices of bearing surface in total hip replacement (THR). We present a detailed description of the properties of articulating surfaces review the understanding of the advantages and disadvantages of existing bearing couples. Recent technological developments in the field of polyethylene and ceramics have altered the risk of fracture and the rate of wear, although the use of metal-on-metal bearings has largely fallen out of favour, owing to concerns about reactions to metal debris. As expected, all bearing surface combinations have advantages and disadvantages. A patient-based approach is recommended, balancing the risks of different options against an individual's functional demands.

  2. Current state of the art of blood cell labeling

    International Nuclear Information System (INIS)

    Srivastava, S.C.; Straub, R.F.; Meinken, G.E.; Gil, M.C.

    1985-01-01

    An update on some recent developments in the area of blood cell labeling is provided. Specific topics covered include red cell labeling with /sup 99m/Tc, platelet labeling using an antiplatelet monoclonal antibody, and the labeling of leukocytes with /sup 99m/Tc. Mechanistic information, where available, is discussed. A critical evaluation of current techniques, their pitfalls as well as advantages, and the problems that remain to be resolved, is presented. The promise shown by recent results using the antibody approach for cell labeling is emphasized. An assessment of the progress made in these areas is presented. 38 refs., 10 figs., 6 tabs

  3. Current state of knowledge about nutritional care of pregnant women

    Directory of Open Access Journals (Sweden)

    Luciana Barretto

    2014-12-01

    Full Text Available Pregnancy involves a significant anabolic activity that leads to increased nutritional needs relative to the preconception period. This paper aims to review the current understanding of the energy needs of macro and micronutrients during pregnancy as well as guidelines to address common gastrointestinal disorders during pregnancy, the issue of pica and anthropometric assessment to ensure an optimum weight gain. With the exception of iron, most of the nutrients needed by the pregnancy can be provided by a complete and balanced diet. Currently the scientific evidence shows that routine supplementation with iron and folic acid during pregnancy is a practice that prevents iron deficiency anemia, neural tube disorders and preterm births. Intermittent iron supplementation can also be an appropriated intervention. If the diet does not guarantee and adequate support, iodine, vitamin B12 and vitamin D supplements should also be necessaries. The anthropometric assessment by the pattern of weight gain should be present at each prenatal care visit to prevent maternal and fetal complications. In situations where the mother’s weight cannot be assessed, arm muscle circumference is possible to make an overall assessment as it correlates with maternal weight gain alternative. Measurements of biceps, triceps and subscapular skinfolds are another alternative that is useful to evaluate the fatty deposits and their location, in a complementary way to gain weight.

  4. Congenital nephrogenic diabetes insipidus: the current state of affairs.

    Science.gov (United States)

    Wesche, Daniel; Deen, Peter M T; Knoers, Nine V A M

    2012-12-01

    The anti-diuretic hormone arginine vasopressin (AVP) is released from the pituitary upon hypovolemia or hypernatremia, and regulates water reabsorption in the renal collecting duct principal cells. Binding of AVP to the arginine vasopressin receptor type 2 (AVPR2) in the basolateral membrane leads to translocation of aquaporin 2 (AQP2) water channels to the apical membrane of the collecting duct principal cells, inducing water permeability of the membrane. This results in water reabsorption from the pro-urine into the medullary interstitium following an osmotic gradient. Congenital nephrogenic diabetes insipidus (NDI) is a disorder associated with mutations in either the AVPR2 or AQP2 gene, causing the inability of patients to concentrate their pro-urine, which leads to a high risk of dehydration. This review focuses on the current knowledge regarding the cell biological aspects of congenital X-linked, autosomal-recessive and autosomal-dominant NDI while specifically addressing the latest developments in the field. Based on deepened mechanistic understanding, new therapeutic strategies are currently being explored, which we also discuss here.

  5. [Video game and internet addiction. The current state of research].

    Science.gov (United States)

    Rehbein, F; Mößle, T; Arnaud, N; Rumpf, H-J

    2013-05-01

    The use of interactive screen media is widespread and for some users leads to pathological symptoms that are phenomenologically similar to signs of addictive disorders. Addictive use of computer games and other Internet applications, such as social media can be distinguished. In the past standard criteria to classify this new disorder were lacking. In DSM-5, nine criteria are proposed for diagnosing Internet gaming disorder. The focus is currently on video games as most studies have been done in this field. Prevalence estimations are difficult to interpret due to the lack of standard diagnostic measures and result in a range of the frequency of Internet addiction between 1 % and 4.2 % in the general German population. Rates are higher in younger individuals. For computer game addiction prevalence rates between 0.9 % and 1.7  % can be found in adolescents. Despite substantial comorbidity among those affected current research points to addictive media use as a stand-alone disorder.

  6. Thermal studies of a superconducting current limiter using Monte-Carlo method

    International Nuclear Information System (INIS)

    Leveque, J.; Rezzoug, A.

    1999-01-01

    Considering the increase of the fault current level in electrical network, the current limiters become very interesting. The superconducting limiters are based on the quasi-instantaneous intrinsic transition from superconducting state to normal resistive one. Without detection of default or given order, they reduce the constraints supported by electrical installations above the fault. To avoid the destruction of the superconducting coil, the temperature must not exceed a certain value. Therefore the design of a superconducting coil needs the simultaneous resolution of an electrical equation and a thermal one. This papers deals with a resolution of this coupled problem by the method of Monte-Carlo. This method allows us to calculate the evolution of the resistance of the coil as well as the current of limitation. Experimental results are compared with theoretical ones. (orig.)

  7. Apparatuses and method for converting electromagnetic radiation to direct current

    Science.gov (United States)

    Kotter, Dale K; Novack, Steven D

    2014-09-30

    An energy conversion device may include a first antenna and a second antenna configured to generate an AC current responsive to incident radiation, at least one stripline, and a rectifier coupled with the at least one stripline along a length of the at least one stripline. An energy conversion device may also include an array of nanoantennas configured to generate an AC current in response to receiving incident radiation. Each nanoantenna of the array includes a pair of resonant elements, and a shared rectifier operably coupled to the pair of resonant elements, the shared rectifier configured to convert the AC current to a DC current. The energy conversion device may further include a bus structure operably coupled with the array of nanoantennas and configured to receive the DC current from the array of nanoantennas and transmit the DC current away from the array of nanoantennas.

  8. The current state of wind energy development in Tanzania

    International Nuclear Information System (INIS)

    Kainkwa, R.M.

    2007-01-01

    Wind Energy is one of the renewable power sources that is currently used in a commercial scale for various end-uses such as pumping water deep wells and electricity generation. A precise knowledge of wind speed characteristics is an essential for the efficient planning and implementation of any wind energy project. In Tanzania the use of wind energy in generating electricity has not yet taken place due to lack of knowledge on prospective sites with high wind energy potential. The main objective of this paper is to review some attempts that have been made to explore the wind energy potential in Tanzania and the corresponding prospective sites that have been earmarked so far. (author)

  9. The current state of the challenges for VET in Denmark

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    The aim of this report is to analyse the way the Danish VET system has been coping with four challenges in the last decades. First the report describes key features of the institutional architecture of the current Danish VET-system. In the next two sections priority is given to the challenges....... The report examines how the VET systems connects with the labour market and explores the patterns of transition of the students from VET to the labour market and describes indications of their mobility and employability. In the following section the report focusses on the second challenge for vocational...... the suc-cess of subsequent reforms of VET in improving the connections between VET and higher educa-tion, latest with the reform in 2013. The next challenge to be examined is that of social inclusion. This is mainly a question of raising the retention of students in the vocational programmes, where...

  10. [The current state of the brain-computer interface problem].

    Science.gov (United States)

    Shurkhay, V A; Aleksandrova, E V; Potapov, A A; Goryainov, S A

    2015-01-01

    It was only 40 years ago that the first PC appeared. Over this period, rather short in historical terms, we have witnessed the revolutionary changes in lives of individuals and the entire society. Computer technologies are tightly connected with any field, either directly or indirectly. We can currently claim that computers are manifold superior to a human mind in terms of a number of parameters; however, machines lack the key feature: they are incapable of independent thinking (like a human). However, the key to successful development of humankind is collaboration between the brain and the computer rather than competition. Such collaboration when a computer broadens, supplements, or replaces some brain functions is known as the brain-computer interface. Our review focuses on real-life implementation of this collaboration.

  11. Renewable energy sources in Bulgaria: Current state and trends

    Science.gov (United States)

    Kolev, K.

    The over-dependency of Bulgaria on imported fuel stressed the importance of developing a new energy strategy based on energy saving which includes also using renewable energy sources (RES). The target is the substitution of at least 2 percent of the real primary energy consumption with RES by 2010. The author gives a generalized analysis of the available RES in Bulgaria -solar, wind, geothermal, biomass and mini-hydraulic. The potentialities of each source for its usage as a suitable energy supply are pointed out, as well as the current status of research and implementation work, problems connected with legislation, financing and production of particular facilities. The governmental policy concerning RES is considered briefly. A description is given to the project 'Technical and Economical Assessment of Possibilities for Expansion of the RES-part in the Energy Balance of the Country' developed and started in 1994 in the framework of the PHARE program.

  12. Cyanobactins from Cyanobacteria: Current Genetic and Chemical State of Knowledge.

    Science.gov (United States)

    Martins, Joana; Vasconcelos, Vitor

    2015-11-13

    Cyanobacteria are considered to be one of the most promising sources of new, natural products. Apart from non-ribosomal peptides and polyketides, ribosomally synthesized and post-translationally modified peptides (RiPPs) are one of the leading groups of bioactive compounds produced by cyanobacteria. Among these, cyanobactins have sparked attention due to their interesting bioactivities and for their potential to be prospective candidates in the development of drugs. It is assumed that the primary source of cyanobactins is cyanobacteria, although these compounds have also been isolated from marine animals such as ascidians, sponges and mollusks. The aim of this review is to update the current knowledge of cyanobactins, recognized as being produced by cyanobacteria, and to emphasize their genetic clusters and chemical structures as well as their bioactivities, ecological roles and biotechnological potential.

  13. Current state and trend of radiation regulation system in Japan

    International Nuclear Information System (INIS)

    Yonehara, Hidenori

    2004-01-01

    Japanese regulation system for safety against radiation essentially started from 'Atomic Energy Basic Law' enacted in 1955 and 'Law Concerning Prevention of Radiation Hazards due to Radioisotopes, etc' enacted in 1957, has been regarded as a central rule for radiation protection and safety. Related laws and regulations have been enacted together with their revision. Radiation Council, established in the Science and Technology Agency in 1962 and now belonging to the Ministry of Education, Culture, Sports, Science and Technology, has deliberated basically on International Commission of Radiological Protection (ICRP) statements for legal revision and has set up working groups for current problems. Activities of the groups have concerned ICRP Publication 60 (1990) and later related publications for incorporating the principle into laws as to concepts of dose limits, effective dose, and then of exemption and exclusion. International status of the Japanese regulation, problems and tasks in the regulation are also commented. (N.I.)

  14. Modeling microcirculatory blood flow: current state and future perspectives.

    Science.gov (United States)

    Gompper, Gerhard; Fedosov, Dmitry A

    2016-01-01

    Microvascular blood flow determines a number of important physiological processes of an organism in health and disease. Therefore, a detailed understanding of microvascular blood flow would significantly advance biophysical and biomedical research and its applications. Current developments in modeling of microcirculatory blood flow already allow to go beyond available experimental measurements and have a large potential to elucidate blood flow behavior in normal and diseased microvascular networks. There exist detailed models of blood flow on a single cell level as well as simplified models of the flow through microcirculatory networks, which are reviewed and discussed here. The combination of these models provides promising prospects for better understanding of blood flow behavior and transport properties locally as well as globally within large microvascular networks. © 2015 Wiley Periodicals, Inc.

  15. E-LEARNING: CURRENT STATE, TRENDS AND FUTURE PROSPECTS

    Directory of Open Access Journals (Sweden)

    Г А Краснова

    2017-12-01

    Full Text Available The article is devoted to the main trends of development of e-learning in formal and non-formal education in different countries. The article discusses the main quantitative and qualitative characteristics of the market of e-learning education. The authors define main reasons the development of e-learning education in higher education. The authors note that the demand for e-learning by various groups of users will push the education authorities and educational institutions to develop different forms of e-learning and implement new business models of universities. In most universities in Europe and the United States adopted or will be adopted for the institutional strategy of development of e-learning.

  16. The current and ideal state of anatomic pathology patient safety.

    Science.gov (United States)

    Raab, Stephen Spencer

    2014-01-01

    An anatomic pathology diagnostic error may be secondary to a number of active and latent technical and/or cognitive components, which may occur anywhere along the total testing process in clinical and/or laboratory domains. For the pathologist interpretive steps of diagnosis, we examine Kahneman's framework of slow and fast thinking to explain different causes of error in precision (agreement) and in accuracy (truth). The pathologist cognitive diagnostic process involves image pattern recognition and a slow thinking error may be caused by the application of different rationally-constructed mental maps of image criteria/patterns by different pathologists. This type of error is partly related to a system failure in standardizing the application of these maps. A fast thinking error involves the flawed leap from image pattern to incorrect diagnosis. In the ideal state, anatomic pathology systems would target these cognitive error causes as well as the technical latent factors that lead to error.

  17. Precarious Employment in the Vologda Oblast: Current State and Trends

    Directory of Open Access Journals (Sweden)

    Aleksandr Mikhailovich Panov

    2016-09-01

    Full Text Available The paper is devoted to the study of the phenomenon of precarious employment in Russian regions. Today, the socio-economic sciences lack a single concept of precarious employment applicable to Russian conditions. Despite the considerable amount of scientific and practical works of domestic and foreign authors on the issue of precarious employment, the criteria of its statistical evaluation as applied to Russian conditions have not been determined. At the same time, the development of precarious employment threatens the country’s socio-economic welfare, because it creates the risk of unwanted effects such as poor employment, hidden and open unemployment, lower labor productivity, degradation of human capital, etc. The paper provides a brief review of research on the problem stated, and defines precarious employment. The author makes an attempt to determine and substantiate the list of indicators available in official statistics for assessing precarious employment in the region. The study allocates three blocks of indicators: indicators of institutional regulation, conditions of employment and functioning of the labor market. Based on these indicators, the author analyzes the status and trends of precarious work in the Vologda Oblast in the period from 2001 to 2015. In some cases, the author presents a comparative analysis of the data for the Russian Federation and Northwestern Federal District. The analysis has helped identify positive and negative changes in the field of precarious employment in the Vologda Oblast. In particular, the author identifies the following problems: an increase in the share of those employed in the informal sector, a relative increase in the number of the working poor, an almost three-fold growth of overdue debts on wages in comparable prices per worker. On the basis of this analysis, the author identifies the directions of the state policy that can help reduce precarious employment: development of information

  18. Current state of epidemiological studies in Belarus about Chernobyl sufferers

    Energy Technology Data Exchange (ETDEWEB)

    Matsko, V.P. [Institute of Radiobiology, Academy Sciences of Belarus, Minsk (Belarus)

    1998-03-01

    The present paper is an analysis of the results of epidemiological studies in Belarus about the after-effects of the accident at the Chernobyl atomic power station (ChAPS), based on published data at scientific institutes, organs and institutions of Ministry of Health. In the last years the affected population showed thereby more significant - as compared with republican indices - growth of incidence in the majority of diseases (first of all: digestion, urogenital, nervous, endocrine systems, diseases of ear, throat, nose both among adults and among children). Aggravation of health state continues in the participants of liquidation of the ChAPS accident consequences and the evacuees from the alienation zone which have obtained considerable radiation load to organism (rise of incidence of diseases of endocrine, cardiovascular, nervous system etc.). Considerable growth of thyroid cancer incidence is registered in Belarus children and adolescents, especially in the Gomel and Brest regions. This is conditioned by dose commitments on thyroid gland due to iodine radionuclides in first period after the accident, incorrect iodine prophylaxy, and goitre endemic. The rise of hereditary pathology is registered too. An expressed increase of oncological diseases is observed therewith mainly in the Gomel region, especially in the districts with high level of radiocontamination and, consequently, significant radiation load. First of all, this relates to the growth of incidence of cancer of lungs, mammary gland, bladder. The analysis of epidemiological studies performed in Belarus after the ChAPS catastrophe and comparison of them with data obtained in the pre-Chernobyl period testify to the aggravation of health state of Belarus population. The specialists unambiguously recognize the direct influence of radioactive pollution in the environment on rise of thyroid pathologies, hereditary and congenial diseases, and cancers of different localizations. There is no unique opinion

  19. Embedded Ag Grid Electrodes as Current Collector for Ultraflexible Transparent Solid-State Supercapacitor.

    Science.gov (United States)

    Xu, Jian-Long; Liu, Yan-Hua; Gao, Xu; Sun, Yilin; Shen, Su; Cai, Xinlei; Chen, Linsen; Wang, Sui-Dong

    2017-08-23

    Flexible transparent solid-state supercapacitors have attracted immerse attention for the power supply of next-generation flexible "see-through" or "invisible" electronics. For fabrication of such devices, high-performance flexible transparent current collectors are highly desired. In this paper, the utilization of embedded Ag grid transparent conductive electrodes (TCEs) fabricated by a facile soft ultraviolet imprinting lithography method combined with scrap techniques, as the current collector for flexible transparent solid-state supercapacitors, is demonstrated. The embedded Ag grid TCEs exhibit not only excellent optoelectronic properties (R S ∼ 2.0 Ω sq -1 and T ∼ 89.74%) but also robust mechanical properties, which could meet the conductivity, transparency, and flexibility needs of current collectors for flexible transparent supercapacitors. The obtained supercapacitor exhibits large specific capacitance, long cycling life, high optical transparency (T ∼ 80.58% at 550 nm), high flexibility, and high stability. Owing to the embedded Ag grid TCE structure, the device shows a slight capacitance loss of 2.6% even after 1000 cycles of repetitive bending for a bending radius of up to 2.0 mm. This paves the way for developing high-performance current collectors and thus flexible transparent energy storage devices, and their general applicability opens up opportunities for flexible transparent electronics.

  20. Current state of copper stabilizers and methodology towards calculating risk

    CERN Document Server

    Koratzinos, M

    2011-01-01

    The talk will start by reviewing the landscape: a brief mention of the results of the warm copper stabilizer measurements and the results of the splice measurements at cold will be shown. The preliminary results of the recent RRR measurements will then be presented. Then, together with the limits presented from talk no. 2, the probability of an incident will be presented for beam energies between 3.5 and 5TeV. The available methods at our disposal for addressing the limiting factors and operating at a higher energy will then be reviewed: a complete circuit qualification method coined the Thermal Amplifier can define the maximum safe energy of the LHC in case of a quench next to a defective joint. Ways of avoiding magnet quenches, another critical element of the analysis, for instance by optimizing BLM settings will then be shown. Finally, a proposal of a strategy for running at the highest possible energy compatible with a pre-defined level of risk will be presented. As a case study, the method will also be a...

  1. Electrochemical synthesis of nanosized hydroxyapatite by pulsed direct current method

    Energy Technology Data Exchange (ETDEWEB)

    Nur, Adrian; Rahmawati, Alifah; Ilmi, Noor Izzati; Affandi, Samsudin; Widjaja, Arief [Departement of Chemical Engineering, Faculty of Industrial Technology, Sepuluh Nopember Institute of Technology, Kampus ITS Sukolilo, Surabaya 60111 (Indonesia)

    2014-02-24

    Synthesis of nanosized of hydroxyapatite (HA) by electrochemical pulsed direct current (PDC) method has been studied. The aim of this work is to study the influence of various PDC parameters (pH initial, electrode distance, duty cycle, frequency, and amplitude) on particle surface area of HA powders. The electrochemical synthesis was prepared in solution Ca{sup 2+}/EDTA{sup 4−}/PO{sub 4}{sup 3+} at concentration 0.25/0.25/0.15 M for 24 h. The electrochemical cell was consisted of two carbon rectangular electrodes connected to a function generator to produce PDC. There were two treatments for particles after electrosynthesized, namely without aging and aged for 2 days at 40 °C. For both cases, the particles were filtered and washed by demineralized water to eliminate the impurities and unreacted reactants. Then, the particles were dried at 100 °C for 2 days. The dried particles were characterized by X-ray diffraction, surface area analyzer, scanning electron microscopy (SEM), Fourier transform infrared spectra and thermogravimetric and differential thermal analysis. HA particles can be produced when the initial pH > 6. The aging process has significant effect on the produced HA particles. SEM images of HA particles showed that the powders consisted of agglomerates composed of fine crystallites and have morphology plate-like and sphere. The surface area of HA particles is in the range of 25 – 91 m{sup 2}/g. The largest particle surface area of HA was produced at 4 cm electrode distance, 80% cycle duty, frequency 0.1 Hz, amplitude 9 V and with aging process.

  2. Current-State Constrained Filter Bank for Wald Testing of Spacecraft Conjunctions

    Science.gov (United States)

    Carpenter, J. Russell; Markley, F. Landis

    2012-01-01

    We propose a filter bank consisting of an ordinary current-state extended Kalman filter, and two similar but constrained filters: one is constrained by a null hypothesis that the miss distance between two conjuncting spacecraft is inside their combined hard body radius at the predicted time of closest approach, and one is constrained by an alternative complementary hypothesis. The unconstrained filter is the basis of an initial screening for close approaches of interest. Once the initial screening detects a possibly risky conjunction, the unconstrained filter also governs measurement editing for all three filters, and predicts the time of closest approach. The constrained filters operate only when conjunctions of interest occur. The computed likelihoods of the innovations of the two constrained filters form a ratio for a Wald sequential probability ratio test. The Wald test guides risk mitigation maneuver decisions based on explicit false alarm and missed detection criteria. Since only current-state Kalman filtering is required to compute the innovations for the likelihood ratio, the present approach does not require the mapping of probability density forward to the time of closest approach. Instead, the hard-body constraint manifold is mapped to the filter update time by applying a sigma-point transformation to a projection function. Although many projectors are available, we choose one based on Lambert-style differential correction of the current-state velocity. We have tested our method using a scenario based on the Magnetospheric Multi-Scale mission, scheduled for launch in late 2014. This mission involves formation flight in highly elliptical orbits of four spinning spacecraft equipped with antennas extending 120 meters tip-to-tip. Eccentricities range from 0.82 to 0.91, and close approaches generally occur in the vicinity of perigee, where rapid changes in geometry may occur. Testing the method using two 12,000-case Monte Carlo simulations, we found the

  3. Review of the Current State of UAV Regulations

    Directory of Open Access Journals (Sweden)

    Claudia Stöcker

    2017-05-01

    Full Text Available UAVs—unmanned aerial vehicles—facilitate data acquisition at temporal and spatial scales that still remain unachievable for traditional remote sensing platforms. However, current legal frameworks that regulate UAVs present significant barriers to research and development. To highlight the importance, impact, and diversity of UAV regulations, this paper provides an exploratory investigation of UAV regulations on the global scale. For this, the methodological approach consists of a research synthesis of UAV regulations, including a thorough literature review and a comparative analysis of national regulatory frameworks. Similarities and contrasting elements in the various national UAV regulations are explored including their statuses from the perspectives of past, present, and future trends. Since the early 2000s, countries have gradually established national legal frameworks. Although all UAV regulations have one common goal—minimizing the risks to other airspace users and to both people and property on the ground—the results reveal distinct variations in all the compared variables. Furthermore, besides the clear presence of legal frameworks, market forces such as industry design standards and reliable information about UAVs as public goods are expected to shape future developments.

  4. PHYLLOID TUMORS OF MAMMARY GLANDS. CURRENT STATE OF THE PROBLEM

    Directory of Open Access Journals (Sweden)

    A. D. Zikiryakhodzhaev

    2017-01-01

    Full Text Available Phylloid (leaf-shaped breast tumors are a rare disease and constitute 0.3–0.5% of all breast tumors. Due to the rare frequency of occurrence, as well as the small number of randomized studies that have been conducted on this pathology, there is currently no standardized approach to the diagnosis and treatment of phylloid tumors. The reports about these rare cases appearing in the literature are, as a rule, descriptive, which only emphasizes the difficulty of differential diagnosis, the development of the correct tactics for treating such patients. In connection with the rarity, it is very difficult to diagnose correctly this pathology, which requires a highly qualified doctor as a diagnostician in the initial contact with such a patient, and a pathologist doctor who establishes the final morphological diagnosis. Often, leaf-shaped tumors are mistaken for mammary fibroadenomas. Such difficulties in correct diagnosis in the preoperative period can lead to errors in the planning of treatment. Also, the recommendations for the treatment of patients with this diagnosis are not fully understood, since up to now there are no accepted treatment standards in both Russian and foreign recommendations. Due to the fact that this pathology of mammary glands is rare, the principles of treatment are based on small retrospective studies and clinical observations. In this review, we will discuss the results of major retrospective studies, including data on epidemiology, etiology, diagnostic approach, strategies and results of treatment of this complex group of breast pathologies.

  5. Clinical pharmacology in Russia-historical development and current state.

    Science.gov (United States)

    Zagorodnikova Goryachkina, Ksenia; Burbello, Aleksandra; Sychev, Dmitry; Frolov, Maxim; Kukes, Vladimir; Petrov, Vladimir

    2015-02-01

    Clinical pharmacology in Russia has long history and is currently active, but rather unrecognized internationally. It is governmentally approved as a teaching/scientific specialty since 1983 and as a medical specialty since 1997. Courses of clinical pharmacology are included in the undergraduate curricula in the 5th and/or 6th year of education at all medical schools in the Russian Federation. Postgraduate education includes initial specialization in internal medicine with further residency in clinical pharmacology. Governmental legislation recommends that every healthcare institution has either a department or a single position of clinical pharmacologist. Major routine duties include information about and monitoring of medication use, consultations in difficult clinical situations, pharmacogenetic counseling, therapeutic drug monitoring, pharmacovigilance, and participation in drug and therapeutics (formulary) committees. There are official experts in clinical pharmacology in Russia responsible for coordinating relevant legislative issues. The chief expert clinical pharmacologist represents the discipline directly at the Ministry of Health. Research in clinical pharmacology in Russia is extensive and variable, but only some of it is published internationally. Russia is a participant of international societies of clinical pharmacology and therapeutics and collaboration is actively ongoing. There are still certain problems related to the development of the discipline in Russia-some healthcare institutions do not see the need for clinical pharmacology. However, the number of clinical pharmacologists in Russia is increasing as well as their role in physicians' education, national healthcare, and research.

  6. The Current State of Additive Manufacturing in Wind Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palmer, Sierra [Worcester Polytechnic Institute (WPI), , Worcester, MA (United States); Lee, Dominic [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States); Remo, Timothy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenne, Dale Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    Wind power is an inexhaustible form of energy that is being captured throughout the U.S. to power the engine of our economy. A robust, domestic wind industry promises to increase U.S. industry growth and competitiveness, strengthen U.S. energy security independence, and promote domestic manufacturing nationwide. As of 2016, ~82GW of wind capacity had been installed, and wind power now provides more than 5.5% of the nation’s electricity and supports more than 100,000 domestic jobs, including 500 manufacturing facilities in 43 States. To reach the U.S. Department of Energy’s (DOE’s) 2015 Wind Vision study scenario of wind power serving 35% of the nation's end-use demand by 2050, significant advances are necessary in all areas of wind technologies and market. An area that can greatly impact the cost and rate of innovation in wind technologies is the use of advanced manufacturing, with one of the most promising areas being additive manufacturing (AM). Considering the tremendous promise offered by advanced manufacturing, it is the purpose of this report to identify the use of AM in the production and operation of wind energy systems. The report has been produced as a collaborative effort for the DOE Wind Energy Technology Office (WETO), between Oak Ridge National Laboratory (ORNL) and the National Renewable Energy Laboratory (NREL).

  7. Current state of seagrass ecosystem services: Research and policy integration

    KAUST Repository

    Ruiz-Frau, A.

    2017-10-12

    Seagrasses contribute to the maintenance of human wellbeing. However certain aspects of their role as ecosystem service (ES) providers remain understudied. Here, we synthesise the state of seagrass ES (SGES) research and policy implications. Additionally, we recommend ways in which SGES research can be integrated in to policy design, by drawing lessons from the case of Blue Carbon (BC). SGES research suffers from three main biases: a geographical bias, SGES has been restricted to chartered seagrass areas; a type of service research bias, provisioning and regulating services have received extensive attention while cultural services remain understudied; a type of discipline bias, the ecological aspects of SGES have been well documented while economic and social aspects remain in comparison understudied. These are particularly important, as an understanding of the social and economic considerations of the provision of ES is fundamental to facilitate its integration into policy frameworks. Lessons drawn from the operationalization process of BC show the reoccurrence of certain aspects that have enabled the integration of BC into policy. These aspects are grouped under 4 different categories. From the analysis of these elements we draw lessons that could facilitate the operationalization of other ecosystem services and their incorporation into management policy frameworks.

  8. Current state of spent fuel management in the Russian Federation

    International Nuclear Information System (INIS)

    Makarchuk, T.F.; Spichev, V.V.; Tikhonov, N.S.; Simanovsky, V.M.; Tokarenko, A.I.; Bespalov, V.N.

    1998-01-01

    Twenty nine power units of nine nuclear power plants of total installed capacity 22 GW(e) are now in operation in the Russian Federation. They produce approximately 12% of electric power in the country. The annual spent fuel arising is about 790 tU. The spent fuel from VVER-440 and BN-600 is reprocessed at the RT-1 plant near Chelyabinsk. The VVER-1000 spent fuel is planned to be reprocessed at the reprocessing plant RT-2 which is under construction near Krasnoyarsk. The RBMK-1000 spent fuel is not reprocessed because of its low fissile content. It is meant to be stored in intermediate storage facilities at the NPP sites and in a centralized storage facility during a period not less than 50 years and then to be disposed of in geological formations. State of the art of spent fuel reprocessing, storage and transportation is considered in the paper. Problems of nuclear fuel cycle back-end in Russia are taken into account. (author)

  9. Roof Moisture Surveys: Current State Of The Technology

    Science.gov (United States)

    Tobiasson, Wayne

    1983-03-01

    Moisture is the big enemy of compact roofing systems. Non-destructive nuclear, capacitance and infrared methods can all find wet insulation in such roofs but a few core samples are needed for verification. Nuclear and capacitance surveys generate quantitative results at grid points but examine only a small portion of the roof. Quantitative results are not usually provided by infrared scanners but they can rapidly examine every square inch of the roof. Being able to find wet areas when they are small is an important advantage. Prices vary with the scope of the investigation. For a particular scope, the three techniques are often cost-competitive. The limitations of each technique are related to the people involved as well as the equipment. When the right people are involved, non-destructive surveys are a very effective method for improving the long-term performance and reducing the life-cycle costs of roofing systems. Plans for the maintenance, repair or replacement of a roof should include a roof moisture survey.

  10. Poliomyelitis in the United States: A Historical Perspective and Current Vaccination Policy.

    Science.gov (United States)

    Farizo, Karen M.; And Others

    1990-01-01

    Examines poliomyelitis in the United States by reviewing clinical manifestations and outcomes, history, recent epidemiologic characteristics, characteristics of currently available vaccines, controversies surrounding vaccination policy, current poliovirus vaccination recommendations, and prospects for worldwide eradication. Poliomyelitis remains…

  11. Nabarlek Traditional Owners' perspective on the current state of revegetation

    International Nuclear Information System (INIS)

    Lewis, B.

    2001-01-01

    Aboriginal people derive their identity from an ancestral relationship to land mediated through a traditional form of land title. This relationship to country determines a group or individual's place in the complex of law, ceremony, culture, responsibility, status, marriage, income etc (often collectively termed 'culture'), that is the essential corollary of traditional land tenure. In effect, country bestows upon Traditional Owners a place in the scheme of things as do social and occupational status, racial origin, financial position etc upon the Westerner. It is a critical link in the preservation of Aboriginal society, and pressure on or erosion of this relationship imposes further strain on the significant burden to Traditional Owners of cultural maintenance. In order that disenfranchisement does not occur because of the mining process, Traditional Owners must have a guarantee that the country will be returned to a pre-mining state as far as possible. This is certainly a significant part of the initial discussion of any consent (under the Aboriginal Land Rights (Northern Territory) Act, 1976). Among the worst outcomes for Aboriginal people involved in the mining process is the return to them of degraded lands, an indication to them that the Westerners who initially placed such great value on it no longer do so. These people are left with the mess or the scraps and perhaps for them the least traumatic course is to walk away, to pretend that the mined-out country is of no importance to them and that there is no pain. The rehabilitation of Nabarlek is in some ways a special case. There was a fairly long period from 1988 to 1994 in which nothing happened. At the final decision to close the operation much of the infrastructure was no longer useable. Initially there was ascribed certain value to plant and equipment items that did not really eventuate for Traditional Owners. Significant portions of the remnant infrastructure was handed back to Traditional Owners

  12. Current state and future prospects of remedial soil protection. Background

    Energy Technology Data Exchange (ETDEWEB)

    Frauenstein, Joerg

    2009-08-15

    The legal basis for soil protection in the Federal Republic of Germany is: -The Act on Protection against Harmful Changes to Soil and on Rehabilitation of Contaminated Sites (Federal Soil Protection Act) (Bundes-Bodenschutzgesetz - BBodSchG) of 1998 [1] -The Federal Soil Protection and Contaminated Sites Ordinance (BBodSchV) of 1999 [2]. In Germany, the Federal Government has legislative competence in the field of soil protection. The Lander (German federal states), in turn, are responsible for enforcement of the BBodSchG and the BBodSchV; they may also issue supplementary procedural regulations. According to Article 1 BBodschG, the purpose of the Act is inter alia to protect and restore the functions of the soil on a permanent sustainable basis. These actions shall include prevention of harmful soil changes as well as rehabilitating soil, contaminated sites and waters contaminated by such sites in such a way that any contamination remains permanently below the hazard threshold. Whilst prevention aims to protect and preserve soil functions on a long-term basis, the object of remediation is mainly to avert concrete hazards in a spatial, temporal and manageable causative context. ''Remedial soil protection'' encompasses a tiered procedure in which a suspicion is verified successively and with least-possible effort and in which the circumstances of the individual case at hand are taken into account in deciding whether or not a need for remediation exists. It comprises the systematic stages of identifying, investigating and assessing suspect sites and sites suspected of being contaminated with a view to their hazard potential, determining whether remediation is necessary, remediating identified harmful soil changes and contaminated sites, and carrying out, where necessary, aftercare measures following final inspection of the remedial measure. (orig.)

  13. Current state and challenges in developing oral vaccines.

    Science.gov (United States)

    Vela Ramirez, Julia E; Sharpe, Lindsey A; Peppas, Nicholas A

    2017-05-15

    While vaccination remains the most cost effective strategy for disease prevention, communicable diseases persist as the second leading cause of death worldwide. There is a need to design safe, novel vaccine delivery methods to protect against unaddressed and emerging diseases. Development of vaccines administered orally is preferable to traditional injection-based formulations for numerous reasons including improved safety and compliance, and easier manufacturing and administration. Additionally, the oral route enables stimulation of humoral and cellular immune responses at both systemic and mucosal sites to establish broader and long-lasting protection. However, oral delivery is challenging, requiring formulations to overcome the harsh gastrointestinal (GI) environment and avoid tolerance induction to achieve effective protection. Here we address the rationale for oral vaccines, including key biological and physicochemical considerations for next-generation oral vaccine design. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. [The current state and prospect of Chinese medicine gastroenterology].

    Science.gov (United States)

    Zhang, Sheng-Sheng; Zhou, Tao

    2012-03-01

    The progress and existent problems of Chinese medicine (CM) gastroenterology since the National Eleventh Five-Year Plan were discussed in this article in terms of theory innovation, formulation of clinical pathway and diagnosis-treatment consensus, efficacy assessment, formulation of efficacy assessment scale, advantage diseases, and exploration of the syndrome standardization, progress in science research, academic exchange, and the construction of study platform, and so on. Meanwhile, the development of CM gastroenterology was prospected in the following five aspects: to enhance the theory inheritance and innovation, the construction of discipline standardization; to establish scientific clinical efficacy assessment methods and the standard system; to expend treatment technologies and feature therapies; and to clarify the modern scientific connotation of CM theory and treatment.

  15. Special Education Teacher Leadership in Jordan: Current State and Constraints

    Directory of Open Access Journals (Sweden)

    Eman Al-Zboon

    2016-06-01

    Full Text Available Distributed leadership can enhance the professional learning communities of schools. The present study explored the leadership experience of Jordanian special education teachers, and their perceptions of common constraints to leadership. A mixed method design was used, including a survey (n = 136 and an interview (n = 23. Results indicated that special education teachers had little experience of leadership roles. They regarded the provision of cognitive and emotional support to colleagues as their most important leadership role, and participating in interview committees and selecting new teachers as the least important. There were no significant mean differences between male and female special education teachers in their level of enacted leadership. Level of education and years of experience were found to have a significant effect on the level of teachers’ leadership.

  16. Pretreatment of agricultural biomass for anaerobic digestion: Current state and challenges.

    Science.gov (United States)

    Paudel, Shukra Raj; Banjara, Sushant Prasad; Choi, Oh Kyung; Park, Ki Young; Kim, Young Mo; Lee, Jae Woo

    2017-12-01

    The anaerobic digestion (AD) of agricultural biomass is an attractive second generation biofuel with potential environmental and economic benefits. Most agricultural biomass contains lignocellulose which requires pretreatment prior to AD. For optimization, the pretreatment methods need to be specific to the characteristics of the biomass feedstock. In this review, cereal residue, fruit and vegetable wastes, grasses and animal manure were selected as the agricultural biomass candidates, and the fundamentals and current state of various pretreatment methods used for AD of these feedstocks were investigated. Several nonconventional methods (electrical, ionic liquid-based chemicals, ruminant biological pretreatment) offer potential as targeted pretreatments of lignocellulosic biomass, but each comes with its own challenges. Pursuing an energy-intensive route, a combined bioethanol-biogas production could be a promising a second biofuel refinery option, further emphasizing the importance of pretreatment when lignocellulosic feedstock is used. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Spatial-time-state fusion algorithm for defect detection through eddy current pulsed thermography

    Science.gov (United States)

    Xiao, Xiang; Gao, Bin; Woo, Wai Lok; Tian, Gui Yun; Xiao, Xiao Ting

    2018-05-01

    Eddy Current Pulsed Thermography (ECPT) has received extensive attention due to its high sensitive of detectability on surface and subsurface cracks. However, it remains as a difficult challenge in unsupervised detection as to identify defects without knowing any prior knowledge. This paper presents a spatial-time-state features fusion algorithm to obtain fully profile of the defects by directional scanning. The proposed method is intended to conduct features extraction by using independent component analysis (ICA) and automatic features selection embedding genetic algorithm. Finally, the optimal feature of each step is fused to obtain defects reconstruction by applying common orthogonal basis extraction (COBE) method. Experiments have been conducted to validate the study and verify the efficacy of the proposed method on blind defect detection.

  18. Rapid Detection Strategies for the Global Threat of Zika Virus: Current State, New Hypotheses and Limitations

    Directory of Open Access Journals (Sweden)

    Shruti Shukla

    2016-10-01

    Full Text Available The current scenario regarding the widespread Zika virus (ZIKV has resulted in numerous diagnostic studies, specifically in South America and in locations where there is frequent entry of travelers returning from ZIKV-affected areas, including pregnant women with or without clinical symptoms of ZIKV infection. The World Health Organization, WHO, announced that millions of cases of ZIKV are likely to occur in the United States of America in the near future. This situation has created an alarming public health emergency of international concern requiring the detection of this life-threatening viral candidate due to increased cases of newborn microcephaly associated with ZIKV infection. Hence, this review reports possible methods and strategies for the fast and reliable detection of ZIKV with particular emphasis on current updates, knowledge and new hypotheses that might be helpful for medical professionals in poor and developing countries that urgently need to address this problem. In particular, we emphasize liposome-based biosensors. Although these biosensors are currently among the less popular tools for human disease detection, they have become useful tools for the screening and detection of pathogenic bacteria, fungi and viruses because of their versatile advantageous features compared to other sensing devices. This review summarizes the currently available methods employed for the rapid detection of ZIKV and suggests an innovative approach involving the application of a liposome-based hypothesis for the development of new strategies for ZIKV detection and their use as effective biomedicinal tools.

  19. 42 CFR 457.80 - Current State child health insurance coverage and coordination.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Current State child health insurance coverage and... HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs and Outreach Strategies...

  20. Current state and perspectives of spent fuel storage in Russia

    International Nuclear Information System (INIS)

    Kurnosov, V.A.; Tichonov, N.S.; Makarchuk, T.F.

    1999-01-01

    Twenty-nine power units at nine nuclear power plants, having a total installed capacity of 22 GW(e), are now in operation in the Russian Federation. They produce approximately 12% of the generated electricity in the country. The annual spent fuel arising is approximately 790 tU. The concept of the closed fuel cycle was adopted as the basis for nuclear power development in the Russian Federation, but until now this concept is only implemented for the fuel cycles of WWER-440 and BN-600 reactors. The WWER-1000 spent fuel is planned to be reprocessed at the reprocessing plant RT-2 which is under construction near Krasnoyarsk. The RBMK-1000 spent fuel is not reprocessed. It is meant to be stored in intermediate storage facilities at the NPP sites. The status of the spent fuel (SF) stored in the storage facilities is given in the paper. The principal characteristics of the fuel cycles of the Russian NPPs in the period up to 2015 is also given in the report. The key variant of the current spent fuel management at RBMK-1000 NPPs is storage in at-reactor and in away-from-reactor wet storage facilities at the power plant site with a capacity of 2,000 W. The storage capacity at the operating RBMKs (including the increase due to denser fuel assembly arrangement) will provide SF reception from the NPPs only up to 2005. For RBMK spent fuel, intermediate dry storage is foreseen at power plant sites in metallic concrete casks and thereafter transportation to the central storage facility at the RT-2 plant for long-term storage. The SF will be reprocessing after completion of the reprocessing plant at RT-2. In the Programme of Nuclear Power Development in the Russian Federation for the period 1998 to 2005 and for the period until 2010 year, provisions are made for the construction of a central dry storage facility before 2010. The facility will have a design capacity of 30,000 tU for WWER-1000 and RBMK-1000 spent fuel and is part of the reprocessing plant RT-2. The paper considers

  1. Flux nucleation in the current-induced resistive state of a constricted type I superconductor

    International Nuclear Information System (INIS)

    Selig, K.P.; Huebener, R.P.

    1981-01-01

    The current-induced resistive state in a constricted type I superconductor is characterized by a train of flux tubes traversing the sample perpendicular to the direction of the applied current following its nucleation at the sample edge. The temporal structure of the nucleation process can be investigated by attempting to synchronize this process with small periodic current pulses superimposed on the direct bias current. The resistive dc voltage is then to be measured as a function of the pulse parameters such as frequency and width. We have performed such experiments at 4.2 K on constricted Pb films of 6--8 μm thickness and 100 μm width. Simultaneously with the electrical measurements the dynamic behavior of the flux tubes was directly observed using a stroboscopic magnetooptical method for magnetic flux detection. Our electrical measurements clearly show how the size of the nucleated flux tubes varies with the direct bias current and the nucleation frequency. The positive wall energy in the Pb films results in a lower limit for this size as expected. The influence of the preceding flux tubes still existing within the constriction upon the flux nucleation process is revealed in detail. All observations can be understood from a consideration of the energy balance during the flux nucleation process

  2. The current state of rural neurosurgical practice: An international perspective

    Directory of Open Access Journals (Sweden)

    Pavan S Upadhyayula

    2018-01-01

    Full Text Available Introduction: Rural and low-resource areas have diminished capacity to care for neurosurgical patients due to lack of infrastructure, healthcare investment, and training programs. This review summarizes the range of rural neurosurgical procedures, novel mechanisms for delivering care, rapid training programs, and outcome differences across international rural neurosurgical practice. Methods: A comprehensive literature search was performed for English language manuscripts with keywords “rural” and “neurosurgery” using the National Library of Medicine PubMed database (01/1971–06/2017. Twenty-four articles focusing on rural non-neurosurgical practice were included. Results: Time to care and/or surgery and shortage of trained personnel remain the strongest risk factors for mortality and poor outcome. Telemedicine consults to regional centers with neurosurgery housestaff have potential for increased timeliness of diagnosis/triage, improved time to surgery, and reductions in unnecessary transfers in remote areas. Mobile neurosurgery teams have been deployed with success in nations with large transport distances precluding initial transfers. Common neurosurgical procedures involve trauma mechanisms; accordingly, training programs for nonneurosurgery medical personnel on basic assessment and operative techniques have been successful in resource-deficient settings where neurosurgeons are unavailable. Conclusions: Protracted transport times, lack of resources/training, and difficulty retaining specialists are barriers to successful outcomes. Advances in telemedicine, mobile neurosurgery, and training programs for urgent operative techniques have been implemented efficaciously. Development of guidelines for paired partnerships between rural centers and academic hospitals, supplying surplus technology to rural areas, and rapid training of qualified local surgical personnel can create sustainable feed-forward programs for trainees and

  3. Worksite health promotion research: challenges, current state and future directions

    Directory of Open Access Journals (Sweden)

    Georg F. Bauer

    2007-12-01

    Full Text Available

    Background: Worksite health promotion (WHP addresses diverse individual and work-related health determinants. Thus, multiple, non-standardized interventions as well as company outcomes other than health have to be considered in WHP research.

    Methods: The article builds primarily on published research reviews in WHP and related fields. It discusses key practical and research challenges of the workplace setting. The evidence available on the effectiveness of WHP is summarised and conclusions are drawn for future WHP practice and research.

    Results: WHP research on health-oriented, behavioural interventions shows that the level of evidence ranges from suggestive to acceptable for key prevention areas such as physical activity, nutrition, fitness, smoking, alcohol and stress. Such interventions are effective if key conditions are met. Future research is needed on long-term effects, on multi-component programs and on programs, which address environmental determinants of health behaviour as well. Research on work-related determinants of health shows the economic and public health relevance of WHP interventions. Reviews of work-oriented, organisational interventions show that they produce a range of individual and organisational outcomes. However, due to the complexity of the organisational context, the generalisability and predictability of such outcomes remain limited.

    Conclusions: WHP research shows success factors of WHP and provides evidence of its effectiveness. In future, the evidence base should be expanded by developing adaptive, company-driven intervention approaches which allow for continuous optimisation of companies from a health perspective. Also, approaches for active dissemination of such a systemic-salutogenic occupational health management approach should be developed to increase the public health impact of WHP.

  4. The Current State of Rural Neurosurgical Practice: An International Perspective

    Science.gov (United States)

    Upadhyayula, Pavan S.; Yue, John K.; Yang, Jason; Birk, Harjus S.; Ciacci, Joseph D.

    2018-01-01

    Introduction: Rural and low-resource areas have diminished capacity to care for neurosurgical patients due to lack of infrastructure, healthcare investment, and training programs. This review summarizes the range of rural neurosurgical procedures, novel mechanisms for delivering care, rapid training programs, and outcome differences across international rural neurosurgical practice. Methods: A comprehensive literature search was performed for English language manuscripts with keywords “rural” and “neurosurgery” using the National Library of Medicine PubMed database (01/1971–06/2017). Twenty-four articles focusing on rural non-neurosurgical practice were included. Results: Time to care and/or surgery and shortage of trained personnel remain the strongest risk factors for mortality and poor outcome. Telemedicine consults to regional centers with neurosurgery housestaff have potential for increased timeliness of diagnosis/triage, improved time to surgery, and reductions in unnecessary transfers in remote areas. Mobile neurosurgery teams have been deployed with success in nations with large transport distances precluding initial transfers. Common neurosurgical procedures involve trauma mechanisms; accordingly, training programs for nonneurosurgery medical personnel on basic assessment and operative techniques have been successful in resource-deficient settings where neurosurgeons are unavailable. Conclusions: Protracted transport times, lack of resources/training, and difficulty retaining specialists are barriers to successful outcomes. Advances in telemedicine, mobile neurosurgery, and training programs for urgent operative techniques have been implemented efficaciously. Development of guidelines for paired partnerships between rural centers and academic hospitals, supplying surplus technology to rural areas, and rapid training of qualified local surgical personnel can create sustainable feed-forward programs for trainees and infrastructural solutions to

  5. Current status of the EPR method to detect irradiated food

    International Nuclear Information System (INIS)

    Desrosiers, M.F.

    1996-01-01

    This review gives a brief outline of the principles of the EPR detection method for irradiated foods by food type. For each food type, the scope, limitations and status of the method are given. The extensive reference list aims to include all which define the method, as well as some rarely cited works of historical importance. (author)

  6. REMOTE DIAGNOSTICS OF TURNOUTS STATE ON TIMING AND SPECTRAL COMPOSITION IN CURRENT CURVE

    Directory of Open Access Journals (Sweden)

    S. Yu. Buryak

    2015-03-01

    Full Text Available Purpose. Development and implementation the points system diagnostics that would allow determining remotely the current state of turnout with all possible faults, gradual and sudden failures, damages, and in real time to report about their appearance. Methodology. State diagnostics on the values analysis of turnout main parameters is proposed to carry out with the help of a computer and analog-to-digital converter (ADC. Connecting measurements performance is advisable to produce to a shunt ammeter, installed in the working circuit of the point feed panel. ADC converts the analog signal of lost volts at the shunt into digital form and transmits it to a computer which stores the received data on its own recording medium for their further processing and storage. There is special software that is capable to reconnect signal and construct its temporal characteristic as well as decompose it on the spectral components. Using it one can analyze the obtained data, which allows diagnosing state of points upon change the nature, values and composition of the current curve. Findings. The computer diagnosis method was confirmed in practice for possible indications of problems that are associated with both the mechanical part of the turnout and the electrical part of it, while controlling parameters such as the amount of current normal transition, when working on frictions, the duration of the transition, properly adjusted headset and attachment points, the state of the motor. Originality. The use of computer technology in the diagnosis of the state of turnouts during their operation to monitor the current values of technical indicators, analysis and storage for all types of electric switches with different types of engines both DC and AC occurs through digitization and recording signal from measuring shunt of point feeder panel. Practical value. The proposed method enables timely, still in the early stages of defect parts, damages or failures of nodes

  7. On the structure of intermediate state created by the direct current

    International Nuclear Information System (INIS)

    Kan, Ya.S.; Frolov, V.A.

    1974-01-01

    Observations were made of the structure of an intermediate state formed at the destruction of superconductivity of a cylindrical tin sample by an electric current through it. For this purpose, there was determined the nature of the dependence of the magnetic permeability averaged over a section normal with the sample axis on the position of this section relative to the axis. the quantity actually measured was the inductance of a short (0.5 mm) superconductive probe coil embracing the sample and moving along the axis of the latter. In order the inductance were representatative of the magnetic permeability in the depth of a thick (5 mm in diameter) sample, measurements were made with a direct current by means of the device specially designed for this purpose; the operating principle and method for checking of this device being briefly described in the paper. The curves of oscillations of the inductance of the probe with the latter being moved along the sample suggested a conclusion that the structure of the intermediate state had a periodic nature (of the London type) with a period of 1.3 mm. The reduction of the oscillation amplitude and the increase of their average level while an increase of the current passing through the sample above the critical value (at constant temperature) indicated the reduction of the diameter of the core, being in the intermediate state, and an increase of the thickness of a normal layer. Measurements were made at temperatures (13-17)x10 -3 deg K below Tsub(k) with a current of 2-3 A in the sample

  8. Second Ripple Current Suppression by Two Bandpass Filters and Current Sharing Method for Energy Storage Converters in DC Microgrid

    DEFF Research Database (Denmark)

    Yang, Ling; Chen, Yandong; Luo, An

    2017-01-01

    With the increasing of AC loads injected into DC microgird (MG) through the inverters, the second ripple current (SRC) in the front-end energy storage converter (ESC) and circulating current among the ESCs in DC MG become more and more serious. In this paper, the SRC suppression method by introdu......With the increasing of AC loads injected into DC microgird (MG) through the inverters, the second ripple current (SRC) in the front-end energy storage converter (ESC) and circulating current among the ESCs in DC MG become more and more serious. In this paper, the SRC suppression method...

  9. Method and device for current driven electric energy conversion

    DEFF Research Database (Denmark)

    2012-01-01

    Device comprising an electric power converter circuit for converting electric energy. The converter circuit comprises a switch arrangement with two or more controllable electric switches connected in a switching configuration and controlled so as to provide a current drive of electric energy from...... configurations such as half bridge buck, full bridge buck, half bridge boost, or full bridge boost. A current driven conversion is advantageous for high efficient energy conversion from current sources such as solar cells or where a voltage source is connected through long cables, e.g. powerline cables for long...... an associated electric source connected to a set of input terminals. This is obtained by the two or more electric swiches being connected and controlled to short-circuit the input terminals during a part of a switching period. Further, a low pass filter with a capacitor and an inductor are provided to low pass...

  10. Adaptive Maneuvering Frequency Method of Current Statistical Model

    Institute of Scientific and Technical Information of China (English)

    Wei Sun; Yongjian Yang

    2017-01-01

    Current statistical model(CSM) has a good performance in maneuvering target tracking. However, the fixed maneuvering frequency will deteriorate the tracking results, such as a serious dynamic delay, a slowly converging speedy and a limited precision when using Kalman filter(KF) algorithm. In this study, a new current statistical model and a new Kalman filter are proposed to improve the performance of maneuvering target tracking. The new model which employs innovation dominated subjection function to adaptively adjust maneuvering frequency has a better performance in step maneuvering target tracking, while a fluctuant phenomenon appears. As far as this problem is concerned, a new adaptive fading Kalman filter is proposed as well. In the new Kalman filter, the prediction values are amended in time by setting judgment and amendment rules,so that tracking precision and fluctuant phenomenon of the new current statistical model are improved. The results of simulation indicate the effectiveness of the new algorithm and the practical guiding significance.

  11. Current reversals and metastable states in the infinite Bose-Hubbard chain with local particle loss

    Science.gov (United States)

    Kiefer-Emmanouilidis, M.; Sirker, J.

    2017-12-01

    We present an algorithm which combines the quantum trajectory approach to open quantum systems with a density-matrix renormalization-group scheme for infinite one-dimensional lattice systems. We apply this method to investigate the long-time dynamics in the Bose-Hubbard model with local particle loss starting from a Mott-insulating initial state with one boson per site. While the short-time dynamics can be described even quantitatively by an equation of motion (EOM) approach at the mean-field level, many-body interactions lead to unexpected effects at intermediate and long times: local particle currents far away from the dissipative site start to reverse direction ultimately leading to a metastable state with a total particle current pointing away from the lossy site. An alternative EOM approach based on an effective fermion model shows that the reversal of currents can be understood qualitatively by the creation of holon-doublon pairs at the edge of the region of reduced particle density. The doublons are then able to escape while the holes move towards the dissipative site, a process reminiscent—in a loose sense—of Hawking radiation.

  12. Read method compensating parasitic sneak currents in a crossbar memristive memory

    KAUST Repository

    Zidan, Mohammed A.

    2017-03-02

    Methods are provided for mitigating problems caused by sneak- paths current during memory cell access in gateless arrays. Example methods contemplated herein utilize adaptive-threshold readout techniques that utilize the locality and hierarchy properties of the computer memory system to address this sneak-paths problem. The method of the invention is a method for reading a target memory cell located at an intersection of a target row of a gateless array and a target column of the gateless array, the method comprising: -reading a value of the target memory cell; and -calculating an actual value of the target memory cell based on the read value of the memory cell and a component of the read value caused by sneak path current. Utilizing either an "initial bits" strategy or a "dummy bits" strategy in order to calculate the component of the read value caused by sneak path current, example embodiments significantly reduce the number of memory accesses pixel for an array readout. In addition, these strategies consume an order of magnitude less power in comparison to alternative state-of-the-art readout techniques.

  13. Voltage and Current Regulators Design of Power Converters in Islanded Microgrids based on State Feedback Decoupling

    DEFF Research Database (Denmark)

    Federico, de Bosio; de Sousa Ribeiro, Luiz Antonio; Freijedo Fernandez, Francisco Daniel

    2016-01-01

    In stand-alone microgrids based on voltage source inverters state feedback coupling between the capacitor voltage and inductor current degrades significantly the dynamics performance of voltage and current regulators. The decoupling of the controlled states is proposed, considering the limitations...

  14. Automatic liquid handling for life science: a critical review of the current state of the art.

    Science.gov (United States)

    Kong, Fanwei; Yuan, Liang; Zheng, Yuan F; Chen, Weidong

    2012-06-01

    Liquid handling plays a pivotal role in life science laboratories. In experiments such as gene sequencing, protein crystallization, antibody testing, and drug screening, liquid biosamples frequently must be transferred between containers of varying sizes and/or dispensed onto substrates of varying types. The sample volumes are usually small, at the micro- or nanoliter level, and the number of transferred samples can be huge when investigating large-scope combinatorial conditions. Under these conditions, liquid handling by hand is tedious, time-consuming, and impractical. Consequently, there is a strong demand for automated liquid-handling methods such as sensor-integrated robotic systems. In this article, we survey the current state of the art in automatic liquid handling, including technologies developed by both industry and research institutions. We focus on methods for dealing with small volumes at high throughput and point out challenges for future advancements.

  15. Shunt attachment and method for interfacing current collection systems

    Science.gov (United States)

    Denney, Paul E.; Iyer, Natraj C.; Hannan, III, William F.

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  16. Method to precipitate metals on zirconium articles without using current

    International Nuclear Information System (INIS)

    Donaghy, R.E.

    1978-01-01

    Tubes or other bodies made of zirconium or Zr alloys used for taking up nuclear fuels are coated without current with a metal film to improve the mechanical and corrosion properties. The article is activated in a solution of ammonium bifluoride and sulphuric acid where an electrical conducting fixed and loose layer are fermed. This loose film is removed chemically by reacting with fluoroboric acid or hydrofluorosilica acid by ultrasonic treatment or by stripping from organic material (cotton, polyester, nylon). The current-free plating with Cu and Ni is described. The article is washed with deionized water between the process steps and finally degassed at a temperature of 150-200 0 C. (IHOE) [de

  17. Development of Rotor Diagnosis Method via Motor Current Signature Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Seok; Huh, Hyung; Kim, Min Hwan; Jeong, Kyeong Hoon; Lee, Gyu Mhan; Park, Jin Ho; Park, Keun Bae; Lee, Cheol Kwon; Hur, S

    2006-01-15

    A study on motor current signature analysis has been performed to monitor a journal bearing fault due to increasing clearance. It was known that the journal bearing clearance produces side band frequencies, the supplied current frequency plus and minus rotational rotor frequency in motor current. But the existence information of the side band frequencies is not sufficient to diagnose whether the journal bearing is safe or not. Four journal bearing sets with different clearances are used to measure the side band frequency amplitude and the rotor vibration amplitude versus the journal bearing clearance. The side band frequency amplitude and the rotor vibration amplitude are increased as the journal bearing clearance is increasing. This trend assures that ASME OM vibration guide line can be applied to estimate the journal bearing clearance size. In this research, 2.5 times the reference side band amplitude is suggested as an indicator of a journal bearing fault. Further study is necessary to make out more specific quantitative relations between the side band frequency amplitude and the journal bearing clearance of a motor.

  18. Development of Rotor Diagnosis Method via Motor Current Signature Analysis

    International Nuclear Information System (INIS)

    Park, Jin Seok; Huh, Hyung; Kim, Min Hwan; Jeong, Kyeong Hoon; Lee, Gyu Mhan; Park, Jin Ho; Park, Keun Bae; Lee, Cheol Kwon; Hur, S.

    2006-01-01

    A study on motor current signature analysis has been performed to monitor a journal bearing fault due to increasing clearance. It was known that the journal bearing clearance produces side band frequencies, the supplied current frequency plus and minus rotational rotor frequency in motor current. But the existence information of the side band frequencies is not sufficient to diagnose whether the journal bearing is safe or not. Four journal bearing sets with different clearances are used to measure the side band frequency amplitude and the rotor vibration amplitude versus the journal bearing clearance. The side band frequency amplitude and the rotor vibration amplitude are increased as the journal bearing clearance is increasing. This trend assures that ASME OM vibration guide line can be applied to estimate the journal bearing clearance size. In this research, 2.5 times the reference side band amplitude is suggested as an indicator of a journal bearing fault. Further study is necessary to make out more specific quantitative relations between the side band frequency amplitude and the journal bearing clearance of a motor

  19. Detection methods for irradiated foods: current status. Proceedings

    International Nuclear Information System (INIS)

    McMurray, C.H.; Gray, R.; Stewart, E.M.; Pearce, J.; Queen's Univ., Belfast, Northern Ireland

    1996-01-01

    This book contains a scientific record of an international meeting on analytical detection methods for irradiation treatment of food. Apart from encouraging the basic development of detection tests, the meeting also aimed to assess the various test methods critically to determine their suitability for general use by public health laboratories and others concerned with trade in irradiated food. Two sets of criteria have been developed to assess test methods, technical criteria for a qualitative or quantitative test and practical criteria if a method is to be widely applied by food labelling authorities. Agreement has already been achieved for the use of electron spin resonance, thermoluminescence, hydrocarbons, 2-Alkylcyclobutanones, microbiological, viscometry and impedance tests. (UK)

  20. Test cases for interface tracking methods: methodology and current status

    International Nuclear Information System (INIS)

    Lebaigue, O.; Jamet, D.; Lemonnier, E.

    2004-01-01

    Full text of publication follows:In the past decade, a large number of new methods have been developed to deal with interfaces in the numerical simulation of two-phase flows. We have collected a set of 36 test cases, which can be seen as a tool to help engineers and researchers selecting the most appropriate method(s) for their specific fields of application. This set can be use: - To perform an initial evaluation of the capabilities of available methods with regard to the specificity of the final application and the most important features to be recovered from the simulation. - To measure the maximum mesh size to be used for a given physical problem in order to obtain an accurate enough solution. - To assess and quantify the performances of a selected method equipped with its set of physical models. The computation of a well-documented test case allows estimating the error due to the numerical technique by comparison with reference solutions. This process is compulsory to gain confidence and credibility on the prediction capabilities of a numerical method and its physical models. - To broaden the capabilities of a given numerical technique. The test cases may be used to identify the need for improvement of the overall numerical scheme or to determine the physical part of the model, which is responsible for the observed limitations. Each test case falls within one of the following categories: - Analytical solutions of well-known sets of equations corresponding to simple geometrical situations. - Reference numerical solutions of moderately complex problems, produced by accurate methods (e.g., boundary Fitted coordinate method) on refined meshes. - Separate effects analytical experiments. The presentation will suggest how to use the test cases for assessing the physical models and the numerical methods. The expected fallout of using test cases is indeed on the one hand to identify the merits of existing methods and on the other hand to orient further research towards

  1. Examination of the Current Approaches to State-Level Nuclear Security Evaluation

    International Nuclear Information System (INIS)

    Kim, Chan; Yim, Mansung; Kim, So Young

    2014-01-01

    An effective global nuclear materials security system will cover all materials, employ international standards and best practices, and reduce risks by reducing weapons-usable nuclear material stocks and the number of locations where they are found. Such a system must also encourage states to accept peer reviews by outside experts in order to demonstrate that effective security is in place. It is thus critically important to create an integrative framework of state-level evaluation of nuclear security as a basis for measuring the level and progress of international effort to secure and control all nuclear materials. There have been studies to represent state-level nuclear security with a quantitative metric. A prime example is the Nuclear Materials Security Index (NMSI) by the Nuclear Threat Initiative (NTI). Another comprehensive study is the State Level Risk Metric by Texas A and M University (TAMU). This paper examines the current methods with respect to their strengths and weaknesses and identifies the directions for future research to improve upon the existing approaches

  2. Tuning of tunneling current noise spectra singularities by localized states charging

    OpenAIRE

    Mantsevich, V. N.; Maslova, N. S.

    2008-01-01

    We report the results of theoretical investigations of tunneling current noise spectra in a wide range of applied bias voltage. Localized states of individual impurity atoms play an important role in tunneling current noise formation. It was found that switching "on" and "off" of Coulomb interaction of conduction electrons with two charged localized states results in power law singularity of low-frequency tunneling current noise spectrum ($1/f^{\\alpha}$) and also results on high frequency com...

  3. Minimum current principle and variational method in theory of space charge limited flow

    Energy Technology Data Exchange (ETDEWEB)

    Rokhlenko, A. [Department of Mathematics, Rutgers University, Piscataway, New Jersey 08854-8019 (United States)

    2015-10-21

    In spirit of the principle of least action, which means that when a perturbation is applied to a physical system, its reaction is such that it modifies its state to “agree” with the perturbation by “minimal” change of its initial state. In particular, the electron field emission should produce the minimum current consistent with boundary conditions. It can be found theoretically by solving corresponding equations using different techniques. We apply here the variational method for the current calculation, which can be quite effective even when involving a short set of trial functions. The approach to a better result can be monitored by the total current that should decrease when we on the right track. Here, we present only an illustration for simple geometries of devices with the electron flow. The development of these methods can be useful when the emitter and/or anode shapes make difficult the use of standard approaches. Though direct numerical calculations including particle-in-cell technique are very effective, but theoretical calculations can provide an important insight for understanding general features of flow formation and even sometimes be realized by simpler routines.

  4. Mentoring and New Teacher Induction in the United States: A Review and Analysis of Current Practices

    Science.gov (United States)

    Bullough, Robert V., Jr.

    2012-01-01

    In this article, current practices were reviewed in mentoring and induction across three large states--New York, Texas, and California--and one small state, Utah. Patterns and trends are described in the United States, program results and evolving views of mentoring are discussed, gaps in the research literature are identified, and the future of…

  5. Analysis of Statistical Methods Currently used in Toxicology Journals.

    Science.gov (United States)

    Na, Jihye; Yang, Hyeri; Bae, SeungJin; Lim, Kyung-Min

    2014-09-01

    Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health.

  6. Can currently available non-animal methods detect pre and ...

    Science.gov (United States)

    Predictive testing to identify and characterise substances for their skin sensitisation potential has historically been based on animal tests such as the Local Lymph Node Assay (LLNA). In recent years, regulations in the cosmetics and chemicals sectors has provided a strong impetus to develop and evaluate non-animal alternative methods. The AOP for skin sensitisation provides a framework to anchor non-animal test methods to key events in the pathway to help identify what tests can be combined together to generate the potency information required for risk assessment. The 3 test methods that have undergone extensive development and validation are the direct peptide reactivity assay (DPRA), the KeratinoSensTM and the human Cell Line Activation Test (h-CLAT). Whilst these methods have been shown to perform relatively well in predicting LLNA results (accuracy ~ 80%), a particular concern that has been raised is their ability to predict chemicals that need to be activated to act as sensitisers (either abiotically on the skin (pre-hapten) or metabolically in the skin (pro-hapten)). The DPRA is a cell free system whereas the other two methods make use of cells that do not fully represent the in vivo metabolic situation. Based on previously published datasets of LLNA data, it has been found that approximately 25% of sensitisers are pre- and/or pro-haptens. This study reviewed an EURL ECVAM dataset of 127 substances for which information was available in the LLNA and the

  7. Results and current trends of nuclear methods used in agriculture

    International Nuclear Information System (INIS)

    Horacek, P.

    1983-01-01

    The significance is evaluated of nuclear methods for agricultural research. The number of breeds induced by radiation mutations is increasing. The main importance of radiation mutation breeding consists in obtaining sources of the desired genetic properties for further hybridization. Radiostimulation is conducted with the aim of increasing yields. The irradiation of foods has not substantially increased worldwide. Very important is the irradiation of excrements and sludges which after such inactivation of pathogenic microorganisms may be used as humus-forming manure or as feed additives. In some countries the method is successfully being used of sexual sterilization for eradication of insect pests. The application of labelled compounds in the nutrition, physiology and protection of plants, farm animals and in food hygiene makes it possible to acquire new and accurate knowledge very quickly. Radioimmunoassay is a highly promising method in this respect. Labelling compounds with the stable 15 N isotope is used for the research of nitrogen metabolism. (M.D.)

  8. Analysis of plasma equilibrium based on orbit-driven current density profile in steady-state plasma on QUEST

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K., E-mail: nakamura@triam.kyushu-u.ac.jp [RIAM, Kyushu University, Kasuga 816-8580 (Japan); Alam, M.M. [IGSES, Kyushu University, Kasuga 816-8580 (Japan); Jiang, Y.Z. [Tsinghua University, Beijing 100084 (China); Mitarai, O. [Tokai University, Kumamoto 862-8652 (Japan); Kurihara, K.; Kawamata, Y.; Sueoka, M.; Takechi, M. [Japan Atomic Energy Agency, Naka 311-0193 (Japan); Hasegawa, M.; Tokunaga, K.; Araki, K.; Zushi, H.; Hanada, K.; Fujisawa, A.; Idei, H.; Nagashima, Y.; Kawasaki, S.; Nakashima, H.; Higashijima, A.; Nagata, T. [RIAM, Kyushu University, Kasuga 816-8580 (Japan); and others

    2016-11-01

    Highlights: • High energy particle guiding center orbit is calculated as a contour plot of conserved variable. • Current density profile is analyzed based on the orbit-driven current. • Plasma equilibrium is reconstructed by considering the hollow current profile. - Abstract: In the present RF-driven (ECCD) steady-state plasma on QUEST (B{sub t} = 0.25 T, R = 0.68 m, a = 0.40 m), plasma current seems to flow in the open magnetic surface outside of the closed magnetic surface in the low-field region according to plasma current fitting (PCF) method. We consider that the current in the open magnetic surface is due to orbit-driven current by high-energy particles in RF-driven plasma. So based on the analysis of current density profile based on the orbit-driven current, plasma equilibrium is to be calculated. We calculated high energy particles guiding center orbits as a contour plot of conserved variable in Hamiltonian formulation and considered particles initial position with different levels of energy and pitch angles that satisfy resonance condition. Then the profile of orbit-driven current is estimated by multiplying the particle density on the resonance surface and the velocity on the orbits. This analysis shows negative current near the magnetic axis and hollow current profile is expected even if pressure driven current is considered. Considering the hollow current profile shifted toward the low-field region, the equilibrium is fitted by J-EFIT coded by MATLAB.

  9. 7 CFR 220.5 - Method of payment to States.

    Science.gov (United States)

    2010-01-01

    ... reimbursement to School Food Authorities through presentation by designated State officials of a payment Voucher... 7 Agriculture 4 2010-01-01 2010-01-01 false Method of payment to States. 220.5 Section 220.5... AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM § 220.5 Method of payment to States. Funds to be...

  10. New Methods for Estimating Water Current Velocity Fields from Autonomous Underwater Vehicles

    Science.gov (United States)

    Kinsey, J. C.; Medagoda, L.

    2016-02-01

    Water current velocities are a crucial component of understanding oceanographic processes and underwater robots, such as autonomous underwater vehicles (AUVs), provide a mobile platform for obtaining these observations. Estimating water current velocities requires both measurements of the water velocity, often obtained with an Acoustic Doppler Current Profiler (ADCP), as well as estimates of the vehicle velocity. Presently, vehicle velocities are supplied on the sea surface with velocity from GPS, or near the seafloor where Doppler Velocity Log (DVL) in bottom-lock is available; however, this capability is unavailable in the mid-water column where DVL bottom-lock and GPS are unavailable. Here we present a method which calculates vehicle velocities using consecutive ADCP measurements in the mid-water using an extended Kalman filter (EKF). The correlation of the spatially changing water current states, along with mass transport and shear constraints on the water current field, is formulated using least square constraints. Results from the Sentry AUV from a mid-water surveying mission at Deepwater Horizon and a small-scale hydrothermal vent flux estimation mission suggest the method is suitable for real-time use. DVL data is denied to simulate mid-water missions and the results compared to ground truth water velocity measurements estimated using DVL velocities. Results show quantifiable uncertainties in the water current velocities, along with similar performance, for the DVL and no-DVL case in the mid-water. This method has the potential to provide geo-referenced water velocity measurements from mobile ocean robots in the absence of GPS and DVL as well as estimate the uncertainty associated with the measurements.

  11. Contraceptive method switching in the United States.

    Science.gov (United States)

    Grady, William R; Billy, John O G; Klepinger, Daniel H

    2002-01-01

    Switching among contraceptive method types is the primary determinant of the prevalence of use of specific contraceptive methods, and it has direct implications for women's ability to avoid unintended pregnancies. Yet, method switching among U.S. women has received little attention from researchers. Data from the 1995 National Survey of Family Growth were used to construct multiple-decrement life tables to explore the gross switching rates of married and unmarried women. Within each group, discrete-time hazard models were estimated to determine how women's characteristics affect their switching behavior. Overall rates of method switching are high among both married and unmarried women (40% and 61%, respectively). Married women's two-year switching rates vary from 30% among women who use the implant, injectable, IUD or other reversible methods to 43% among nonusers, while unmarried women's rates vary from 33% among women who use the implant, injectable or IUD to 70% among nonusers. Multivariate analyses of method switching according to women's characteristics indicate that among married women, women without children are less likely than other women to adopt sterilization or a long-term reversible contraceptive (the implant, injectable or IUD). Older married women have a higher rate than their younger counterparts of switching to sterilization, but are also more likely to continue using no method. Among unmarried women, younger and more highly educated women have high rates of switching to the condom and to dual methods. Women's method switching decisions may be driven primarily by concerns related to level and duration of contraceptive effectiveness, health risks associated with contraceptive use and, among single women, sexually transmitted disease prevention.

  12. Building Visual Artists’ Resilience Capabilities: Current Educator Strategies and Methods

    Directory of Open Access Journals (Sweden)

    Eileen Maree Siddins

    2016-07-01

    Full Text Available Enrolments in higher education programs in the creative and performing arts are increasing in many countries. Yet graduates of these degrees, who enter the broad sector known as the creative industries, face particular challenges in terms of securing long-term and sustainable employment. In addition, creative and performing artists face a range of mental challenges, caused by such factors as: the solitary nature of much creative practice, critical feedback by audiences and gatekeepers, or the general pressures associated with maintaining artistic relevance or integrity. The concepts of resilience and professional wellbeing are therefore highly relevant to those who pursue a career in creative industries, and while there has been an emerging body of work in this area, to date it has focussed on the performing arts area (e.g. music, theatre. Hence, in order to expand knowledge relevant to resilience and artists, this paper sets out to explore the extent to which current educators in the Australian context specifically address these issues within higher visual arts curricula; specifically the areas of illustration, design, film and photography. This was achieved via interviews with seventeen current academics working in these areas. The findings propose that higher education providers of programs in the visual arts consider placing a stronger emphasis on the embedded development of resilience and professional wellbeing capacities.

  13. Review of current study methods for VRU safety

    DEFF Research Database (Denmark)

    Andersen, Camilla Sloth; Kamaluddin, Noor Azreena; Várhelyi, András

    written questionnaires (either online or paper-based), interviews may be performed (either face-to-face or via telephone) and people may be asked to report their accident via an app on their mobile device. The method for gaining self-reported information thus varies greatly – and so does the information...

  14. Teaching About Women in Hispanic Literature: Current Methods and Materials.

    Science.gov (United States)

    Maier, Carol

    Awareness of a new and altered method of teaching literature, similar to that described by Adrienne Rich, grew from the experience of teaching a small introductory course in twentieth century Hispanic women writers to students with diverse language, cultural, and economic backgrounds. Although about half the students were native Spanish speakers,…

  15. A critique of current methods in nematode taxonomy | Abebe ...

    African Journals Online (AJOL)

    In the past few decades, there have been efforts to integrate molecular methods and digital 3D image-capturing technology in nematode taxonomy, the former to enhance the accuracy of identification of such a taxonomically challenging group and the latter to communicate morphological data. While the employment of ...

  16. Teaching the Scientific Method Using Current News Articles

    Science.gov (United States)

    Palmer, Laura K.; Mahan, Carolyn G.

    2013-01-01

    We describe a short (less than 50 minutes) activity using news articles from sources such as "Science Daily" to teach students the steps of the scientific method and the difference between primary and secondary literature sources. The flexibility in choosing news articles to examine allowed us to tailor the activity to the specific interests of…

  17. State Methods for a Cyber Incident

    Science.gov (United States)

    2012-03-01

    Glossary S905 - Incident Submission and Response Standard S910 - Data Breach Notification Standard E-5 Our state characterizes information system...Office of Management and Budget. (2011a). Legislative Language Data Breach Notification. Retrieved September 20, 2010, from http://www.whitehouse.gov...sites/default/files/omb/legislative/letters/ data - breach -notification.pdf Executive Office of the President. Office of Management and Budget

  18. A Control Method of Current Type Matrix Converter for Plasma Control Coil Power Supply

    International Nuclear Information System (INIS)

    Shimada, K.; Matsukawa, M.; Kurihara, K.; Jun-ichi Itoh

    2006-01-01

    In exploration to a tokamak fusion reactor, the control of plasma instabilities of high β plasma such as neoclassical tearing mode (NTM), resistive wall mode (RWM) etc., is the key issue for steady-state sustainment. One of the proposed methods to avoid suppressing RWM is that AC current having a phase to work for reduction the RWM growth is generated in a coil (sector coil) equipped spirally on the plasma vacuum vessel. To stabilize RWM, precise and fast real-time feedback control of magnetic field with proper amplitude and frequency is necessary. This implies that an appropriate power supply dedicated for such an application is expected to be developed. A matrix converter as one of power supply candidates for this purpose could provide a solution The matrix converter, categorized in an AC/AC direct converter composed of nine bi-directional current switches, has a great feature that a large energy storage element is unnecessary in comparison with a standard existing AC/AC indirect converter, which is composed of an AC/DC converter and a DC/AC inverter. It is also advantageous in cost and size of its applications. Fortunately, a voltage type matrix converter has come to be available at the market recently, while a current type matrix converter, which is advantageous for fast control of the large-inductance coil current, has been unavailable. On the background above mentioned, we proposed a new current type matrix converter and its control method applicable to a power supply with fast response for suppressing plasma instabilities. Since this converter is required with high accuracy control, the gate control method is adopted to three-phase switching method using middle phase to reduce voltage and current waveforms distortion. The control system is composed of VME-bus board with DSP (Digital Signal Processor) and FPGA (Field Programmable Gate Array) for high speed calculation and control. This paper describes the control method of a current type matrix converter

  19. Method for making a high current fiber brush collector

    Science.gov (United States)

    Scuro, S. J.

    1986-05-01

    An axial-type homopolar motor having high density, high current fiber brush collectors affording efficient, low contact resistance and low operating temperatures is discussed. The collectors include a ring of concentric row of brushes in equally spaced beveled holes soldered in place using a fixture for heating the ring to just below the solder melting point at a soldering iron for the local application of additional heat at each brush. Prior to soldering, an oxide film is formed on the surfaces of the brushes and ring, and the bevels are burnished to form a wetting surface. Flux applied with the solder at each bevel removes to an effective soldering depth the oxide film on the brushes and the holes.

  20. Current status and prospect of plasma control system for steady-state operation on QUEST

    International Nuclear Information System (INIS)

    Hasegawa, Makoto; Nakamura, Kazuo; Zushi, Hideki; Hanada, Kazuaki; Fujisawa, Akihide; Tokunaga, Kazutoshi; Idei, Hiroshi; Nagashima, Yoshihiko; Kawasaki, Shoji; Nakashima, Hisatoshi; Higashijima, Aki

    2016-01-01

    Highlights: • Overall configuration of plasma control system on QUEST are presented. • Multi core system and reflective memories are used for the real-time control. • Hall sensors are used for the identification of plasma current and its position. • Repetitive gas fueling with the feed-back control of Hα signal is implemented. - Abstract: The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

  1. Current status and prospect of plasma control system for steady-state operation on QUEST

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, Makoto, E-mail: hasegawa@triam.kyushu-u.ac.jp; Nakamura, Kazuo; Zushi, Hideki; Hanada, Kazuaki; Fujisawa, Akihide; Tokunaga, Kazutoshi; Idei, Hiroshi; Nagashima, Yoshihiko; Kawasaki, Shoji; Nakashima, Hisatoshi; Higashijima, Aki

    2016-11-15

    Highlights: • Overall configuration of plasma control system on QUEST are presented. • Multi core system and reflective memories are used for the real-time control. • Hall sensors are used for the identification of plasma current and its position. • Repetitive gas fueling with the feed-back control of Hα signal is implemented. - Abstract: The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

  2. Calorimetric method for current sharing temperature measurements in ITER conductor samples in SULTAN

    International Nuclear Information System (INIS)

    Bagnasco, M.

    2009-01-01

    Several Toroidal Field Conductor short samples with slight layout variations have been assembled and tested in the SULTAN facility at CRPP. The measurement campaigns started in 2007 and are still ongoing. The performance of every conductor is expressed in terms of current sharing temperature (T cs ), i.e. the temperature at which a defined electric field, 10 μV/m, is detected in the cable due to the incipient superconducting-to-normal state transition. The T cs at specific operating conditions is the key design parameter for the ITER conductors and is the main object of the qualification tests. Typically, the average electric field is measured with voltage tap pairs attached on the jacket along the conductor. The inability however to explain observed premature voltage developments opened the discussion about possible alternative measuring methods. The He flow calorimetric method is based on the measurement of the resistive power generation in the conductor. It relies on the detection of very small temperature increases along the conductor in steady state operation. The accuracy and the reliability of the calorimetric method in SULTAN are critically discussed, with particular emphasis on the instrumentation requirements and test procedures. The application of the calorimetric method to the recent SULTAN test campaigns is described with its merits and limits. For future tests of ITER conductors in SULTAN, the calorimetric method for T cs test is proposed as a routine procedure.

  3. The Accident Sequence Precursor program: Methods improvements and current results

    International Nuclear Information System (INIS)

    Minarick, J.W.; Manning, F.M.; Harris, J.D.

    1987-01-01

    Changes in the US NRC Accident Sequence Precursor program methods since the initial program evaluations of 1969-81 operational events are described, along with insights from the review of 1984-85 events. For 1984-85, the number of significant precursors was consistent with the number observed in 1980-81, dominant sequences associated with significant events were reasonably consistent with PRA estimates for BWRs, but lacked the contribution due to small-break LOCAs previously observed and predicted in PWRs, and the frequency of initiating events and non-recoverable system failures exhibited some reduction compared to 1980-81. Operational events which provide information concerning additional PRA modeling needs are also described

  4. Currently used methods for identification and characterization of hemichannels.

    Science.gov (United States)

    Schalper, Kurt A; Palacios-Prado, Nicolás; Orellana, Juan A; Sáez, Juan C

    2008-05-01

    Connexins and pannexins are vertebrate transmembrane proteins that form hexameric conduits termed hemichannels. Functional hemichannels allow the diffusional transport of ions and small molecules across the plasma membrane and serve as paracrine and autocrine communication pathways. During the last decade, interest in the hemichannel field increased substantially. Today, there is evidence for the existence of connexin hemichannels in vertebrate cells and bulk of information supports their function in diverse physiological and pathological responses. Controversy regarding the molecular identity of the hemichannel type mediating many responses arose recently with the identification of pannexin-based hemichannels. Here, the authors describe the most frequently used methods for studying hemichannels in living mammalian cells and focus on those with which they have more experience. Although the available in vitro evidence is substantial, further studies and possibly new experimental approaches are required to understand the role and properties of connexin and pannexin hemichannels in vivo.

  5. Sixty years of fear appeal research: current state of the evidence.

    Science.gov (United States)

    Ruiter, Robert A C; Kessels, Loes T E; Peters, Gjalt-Jorn Y; Kok, Gerjo

    2014-04-01

    Fear arousal is widely used in persuasive campaigns and behavioral change interventions. Yet, experimental evidence argues against the use of threatening health information. The authors reviewed the current state of empirical evidence on the effectiveness of fear appeals. Following a brief overview of the use of fear arousal in health education practice and the structure of effective fear appeals according to two main theoretical frameworks-protection motivation theory and the extended parallel process model-the findings of six meta-analytic studies in the effectiveness of fear appeals are summarized. It is concluded that coping information aimed at increasing perceptions of response effectiveness and especially self-efficacy is more important in promoting protective action than presenting threatening health information aimed at increasing risk perceptions and fear arousal. Alternative behavior change methods than fear appeals should be considered. © 2014 The Authors. International Journal of Psychology published by John Wiley © Sons Ltd on behalf of International Union of Psychological Science.

  6. Metacognition fundaments, applications, and trends a profile of the current state-of-the-art

    CERN Document Server

    2015-01-01

    This book is devoted to the Metacognition arena. It highlights works that show relevant analysis, reviews, theoretical, and methodological proposals, as well as studies, approaches, applications, and tools that shape current state, define trends and inspire future research. As a result of the revision process fourteen manuscripts were accepted and organized into five parts as follows: ·     Conceptual: contains conceptual works oriented to: (1) review models of strategy instruction and tailor a hybrid strategy; (2) unveil second-order judgments and define a method to assess metacognitive judgments; (3) introduces a conceptual model to describe the metacognitive activity as an autopoietic system. ·     Framework: offers three works concerned with: (4) stimulate metacognitive skills and self-regulatory functions; (5) evaluate metacognitive skills and self-regulated learning at problem solving; (6) deal with executive management metacognition and strategic knowledge metacognition. ·     Studies: r...

  7. Veterinarian-Client Communication Skills: Current State, Relevance, and Opportunities for Improvement.

    Science.gov (United States)

    McDermott, Michael P; Tischler, Victoria A; Cobb, Malcolm A; Robbé, Iain J; Dean, Rachel S

    2015-01-01

    Communication is increasingly recognized as a core skill for veterinary practitioners, and in recent years, attention to communication competency and skills training has increased. To gain an up-to-date assessment of the current state of veterinary communication skills and training, we conducted a survey among veterinary practitioners in the United Kingdom and United States in 2012/2013. The questionnaire was used to assess the current state, relevance, and adequacy of veterinary communication skills among veterinary practitioners, to assess interest in further training, and to understand perceived challenges in communicating with clients. There was an overall response rate of 29.6% (1,774 of 6,000 recipients), with a higher response rate for UK-based practitioners (39.7%) than practitioners in the US (19.5%). Ninety-eight percent of respondents agreed that communication skills were as important as or more important than clinical knowledge. Forty-one percent of respondents had received formal veterinary communication skills training during veterinary school, and 47% had received training post-graduation. Thirty-five percent said their veterinary communication skills training during veterinary school prepared them well or very well for communicating with clients about the health of their pets, compared to 61% of those receiving post-graduate training. Forty percent said they would be interested in further veterinary communication skills training, with the preferred methods being simulated consultations and online training. While there has been increased emphasis on communication skills training during and after veterinary school, there is a need for more relevant and accessible training.

  8. Application of Computational Methods in Planaria Research: A Current Update

    Directory of Open Access Journals (Sweden)

    Ghosh Shyamasree

    2017-07-01

    Full Text Available Planaria is a member of the Phylum Platyhelminthes including flatworms. Planarians possess the unique ability of regeneration from adult stem cells or neoblasts and finds importance as a model organism for regeneration and developmental studies. Although research is being actively carried out globally through conventional methods to understand the process of regeneration from neoblasts, biology of development, neurobiology and immunology of Planaria, there are many thought provoking questions related to stem cell plasticity, and uniqueness of regenerative potential in Planarians amongst other members of Phylum Platyhelminthes. The complexity of receptors and signalling mechanisms, immune system network, biology of repair, responses to injury are yet to be understood in Planaria. Genomic and transcriptomic studies have generated a vast repository of data, but their availability and analysis is a challenging task. Data mining, computational approaches of gene curation, bioinformatics tools for analysis of transcriptomic data, designing of databases, application of algorithms in deciphering changes of morphology by RNA interference (RNAi approaches, understanding regeneration experiments is a new venture in Planaria research that is helping researchers across the globe in understanding the biology. We highlight the applications of Hidden Markov models (HMMs in designing of computational tools and their applications in Planaria decoding their complex biology.

  9. Liquid phase microextraction of pesticides: a review on current methods

    International Nuclear Information System (INIS)

    Farajzadeh, Mir Ali; Sorouraddin, Saeed Mohammad; Mogaddam, Mohammad Reza Afshar

    2014-01-01

    Liquid phase microextraction (LPME) enables analytes to be extracted with a few microliters of an organic solvent. LPME is a technique for sample preparation that is extremely simple, affordable and virtually a solvent-free. It can provide a high degree of selectivity and enrichment by eliminating carry-over between single runs. A variety of solvents are known for the extraction of the various analytes. These features have led to the development of techniques such as single drop microextraction, hollow fiber LPME, dispersive liquid-liquid microextraction, and others. LPME techniques have been applied to the analysis of pharmaceuticals, food, beverages, and pesticides. This review covers the history of LPME methods, and then gives a comprehensive collection of their application to the preconcentration and determination of pesticides in various matrices. Specific sections cover (a) sample treatment techniques in general, (b) single-drop microextraction, (c) extraction based on the use of ionic liquids, (d) solidified floating organic drop microextraction, and various other techniques. (author)

  10. Current methods of non-invasive ventilatory support for neonates.

    Science.gov (United States)

    Mahmoud, Ramadan A; Roehr, Charles Christoph; Schmalisch, Gerd

    2011-09-01

    Non-invasive ventilatory support can reduce the adverse effects associated with intubation and mechanical ventilation, such as bronchopulmonary dysplasia, sepsis, and trauma to the upper airways. In the last 4 decades, nasal continuous positive airway pressure (CPAP) has been used to wean preterm infants off mechanical ventilation and, more recently, as a primary mode of respiratory support for preterm infants with respiratory insufficiency. Moreover, new methods of respiratory support have been developed, and the devices used to provide non-invasive ventilation (NIV) have improved technically. Use of NIV is increasing, and a variety of equipment is available in different clinical settings. There is evidence that NIV improves gas exchange and reduces extubation failure after mechanical ventilation in infants. However, more research is needed to identify the most suitable devices for particular conditions; the NIV settings that should be used; and whether to employ synchronized or non-synchronized NIV. Furthermore, the optimal treatment strategy and the best time for initiation of NIV remain to be identified. This article provides an overview of the use of non-invasive ventilation (NIV) in newborn infants, and the clinical applications of NIV. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. CURRENT STATE OF POPULATION OF GAME MAMMALS HABITING SHELKOVSKOY DISTRICT OF CHECHNYA AND WAYS FOR OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    A. M. Batkhiyev

    2015-01-01

    Full Text Available Aim. The goal of the research is that: to identify the taxonomic composition of game species and make full list of species to assess the current state of populations and resources to carry out eco-faunistic analysis of the distribution of game mammals habiting Shelkovskiy district of Chechnya. Methods. We used mapping techniques, various methods of census forms and scientific processing of the collected material, systematic and bioecological analysis. Results. As a result, we have identified 5 ecological complexes and characterized them by distribution on the identified and described natural habitats. We have made an inventory of species, identified conditions of rare species and determined their status. Biometric data has been obtained for a number of species; their biological and ecological features have been described. We also identified the species composition of game mammals and their spatial distribution of habitats. The differentiation of species in ecological groups has been carried out. Data has been obtained on the number of nine major types for the period of 2012-2013, and their characteristics. We have made an estimation of ecological and economic potential of resources of game mammals of the study area. Conclusions. Based on the analysis of the results we can make a judgment about the level of biodiversity of species of game mammals of the studied area, the current state of their number and possible use for commercial, sports and recreational purposes. We propose specific measures such as the use of existing biological resources i.e. species of mammals, as well as the creation of new protected areas as a form of preserving and increasing the number of mammals in the area. The research results can be useful for monitoring and creating specially protected natural reservations, protection of endangered species. The findings have implications for the organization of hunting economy to increase the number of game animals. 

  12. A Comparative Study of Voltage, Peak Current and Dual Current Mode Control Methods for Noninverting Buck-Boost Converter

    Directory of Open Access Journals (Sweden)

    M. Č. Bošković

    2016-06-01

    Full Text Available This paper presents a comparison of voltage mode control (VMC and two current mode control (CMC methods of noninverting buck-boost converter. The converter control-to-output transfer function, line-to-output transfer function and the output impedance are obtained for all methods by averaging converter equations over one switching period and applying small-signal linearization. The obtained results are required for the design procedure of feedback compensator to keep a system stable and robust. A comparative study of VMC, peak current mode control (PCMC and dual-current mode control (DCMC is performed. Performance evaluation of the closed-loop system with obtained compensator between these methods is performed via numerical simulations.

  13. Shielding methods development in the United States

    International Nuclear Information System (INIS)

    Mynatt, F.R.

    1977-01-01

    A generalized shielding methodology has been developed in the U.S.A. that is adaptable to the shielding analyses of all reactor types. Thus far used primarily for liquid-metal fast breeder reactors, the methodology includes several component activities: (1) developing methods for calculating radiation transport through reactor-shield systems; (2) processing cross-section libraries; (3) performing design calculations for specific systems; (4) performing and analyzing pertinent integral experiments; (5) performing sensitivity studies on both the design calculations and the experimental analyses; and, finally, (6) calculating shield design parameters and their uncertainties. The criteria for the methodology are a 5 to 10 percent accuracy for responses at locations near the core and a factor of 2 accuracy for responses at distant locations. The methodology has been successfully adapted to most in-vessel and ex-vessel problems encountered in the shield analyses of the Fast Flux Test Facility and the Fast Flux Test Facility and the Clinch River Breeder Reactor; however, improved techniques are needed for calculating regions in which radiation streaming is dominant. Areas of the methodology in which significant progress has recently been made are those involving the development of cross-section libraries, sensitivity analysis methods, and transport codes

  14. Determination of the Steady State Leakage Current in Structures with Ferroelectric Ceramic Films

    Science.gov (United States)

    Podgornyi, Yu. V.; Vorotilov, K. A.; Sigov, A. S.

    2018-03-01

    Steady state leakage currents have been investigated in capacitor structures with ferroelectric solgel films of lead zirconate titanate (PZT) formed on silicon substrates with a lower Pt electrode. It is established that Pt/PZT/Hg structures, regardless of the PZT film thickness, are characterized by the presence of a rectifying contact similar to p-n junction. The steady state leakage current in the forward direction increases with a decrease in the film thickness and is determined by the ferroelectric bulk conductivity.

  15. [Mixed affective states in the juvenile age (historical aspects, current state of the problem, psychopathology)].

    Science.gov (United States)

    Kopeĭko, G I

    2011-01-01

    The author analyzed the problem in historical, diagnostic and psychopathological aspects and presented the results of his own study. The aim was to study the structure and dynamics of endogenous juvenile mixed states in order to work out the psychopathological typology and to clarify the criteria of diagnosis, differential treatment and clinical-social prognosis. The study included 174 patients, 118 men and 56 women, aged from 17 to 25 years (mean age 20, 4 years). Depressive states were found in 65%, mania in 16% and mixed in 19% of patients. The clinical differentiation of mixed states was carried out basing on the dominating pole of affective disorders and the following types were singled out and described: mania type (dysphoria-like mania)--34%, depressive type (association-driven depression)--38%; alternating type of mixed states--28%. The preference of the formation of alternating and atypical variants of mixed states in the juvenile age demonstrated in the study may reflect the pathogenetic and pathoplastic effect of biological features characteristic of this age--lability and polymorphism of clinical presentations as well as immaturity of emotional and cognitive spheres.

  16. Method for solid state crystal growth

    Science.gov (United States)

    Nolas, George S.; Beekman, Matthew K.

    2013-04-09

    A novel method for high quality crystal growth of intermetallic clathrates is presented. The synthesis of high quality pure phase crystals has been complicated by the simultaneous formation of both clathrate type-I and clathrate type-II structures. It was found that selective, phase pure, single-crystal growth of type-I and type-II clathrates can be achieved by maintaining sufficient partial pressure of a chemical constituent during slow, controlled deprivation of the chemical constituent from the primary reactant. The chemical constituent is slowly removed from the primary reactant by the reaction of the chemical constituent vapor with a secondary reactant, spatially separated from the primary reactant, in a closed volume under uniaxial pressure and heat to form the single phase pure crystals.

  17. Limiting stable states of high-Tc superconductors in the alternating current modes

    International Nuclear Information System (INIS)

    Romanovskii, V.R.; Watanabe, K.; Awaji, S.

    2014-01-01

    The limiting current-carrying capacity of high-T c superconductor and superconducting tape has been studied in the alternating current states. The features that are responsible for their stable formation have been investigated under the conduction-cooled conditions when the operating peak values of the electric field and the current may essentially exceed the corresponding critical values of superconductor. Besides, it has been proved that these peak values are higher than the values of the electric field and the current, which lead to the thermal runaway phenomenon when the current instability onset occurs in the operating modes with direct current. As a result, the stable extremely high heat generation exists in these operating states, which can be called as overloaded states. The limiting stable peak values of charged currents and stability conditions have been determined taking into account the flux creep states of superconductors. The analysis performed has revealed that there exist characteristic times defining the corresponding time windows in the stable development of overloaded states of the alternating current. In order to explain their existence, the basic thermo-electrodynamics mechanisms have been formulated, which have allowed to explain the high stable values of the temperature and the induced electric field before the onset of alternating current instability. In general, it has been shown that the high-T c superconductors may stably operate in the overloaded alternating current states even under the not intensive cooling conditions at a very high level of heat generation, which is not considered in the existing theory of losses. (authors)

  18. Current Researches on the Methods of Diagnosing Sasang Constitution: An Overview

    Directory of Open Access Journals (Sweden)

    Si-Woo Lee

    2009-01-01

    Full Text Available Sasang constitution diagnosis has traditionally been conducted by a Sasang constitutional medicine (SCM doctor who examines the external appearance, temperament and various symptoms of an individual and then collectively analyzes this information to determine their own constitutions. However, because this process is subjective and not quantitative, many researchers have been attempting to develop objective and reasonable methods of determining constitutions. In Korea, even though a wide range of research regarding SCM has been conducted, most of the work has not been revealed internationally. So in this review, the authors have searched the Journal of Sasang Constitutional Medicine, as well as other Korean domestic journal databases and Pubmed for research regarding modernized constitution diagnosis methods so to provide the understanding of current research state and outlook for future research.

  19. A review of spurious currents in the lattice Boltzmann method for multiphase flows

    Energy Technology Data Exchange (ETDEWEB)

    Conning Ton, Kevin; Lee, Tae Hun [The City College of the City Univ. of New York, New York (United States)

    2012-12-15

    A spurious current is a small amplitude artificial velocity field which arises from an imbalance between discretized forces in multiphase/multi component flows. If it occurs, the velocity field may persist indefinitely, preventing the achievement of a true equilibrium state. Spurious velocities can sometimes be as large as the characteristic velocities of the problem, causing severe instability and ambiguity between physical and spurious velocities. They are typically exacerbated by large values of numerical surface tension or when the two fluids being simulated have large density ratios. The resulting instability can restrict what parameters may be simulated. To varying degrees, spurious currents are found in all multiphase flow models of the lattice Boltzmann method (LBM). There have been many studies of the occurrence of the phenomenon, and many suggestions on how to eliminate it. This paper reviews the three main models of simulating multiphase/multi component flow in the lattice Boltzmann method, as well as the subsequent modifications made in order to reduce or eliminate spurious currents.

  20. A Compositional Sweep-Line State Space Exploration Method

    DEFF Research Database (Denmark)

    Kristensen, Lars Michael; Mailund, Thomas

    2002-01-01

    State space exploration is a main approach to verification of finite-state systems. The sweep-line method exploits a certain kind of progress present in many systems to reduce peak memory usage during state space exploration. We present a new sweep-line algorithm for a compositional setting where...

  1. State Higher Education Funding Models: An Assessment of Current and Emerging Approaches

    Science.gov (United States)

    Layzell, Daniel T.

    2007-01-01

    This article provides an assessment of the current and emerging approaches used by state governments in allocating funding for higher education institutions and programs. It reviews a number of desired characteristics or outcomes for state higher education funding models, including equity, adequacy, stability, and flexibility. Although there is…

  2. High-voltage, high-current, solid-state closing switch

    Science.gov (United States)

    Focia, Ronald Jeffrey

    2017-08-22

    A high-voltage, high-current, solid-state closing switch uses a field-effect transistor (e.g., a MOSFET) to trigger a high-voltage stack of thyristors. The switch can have a high hold-off voltage, high current carrying capacity, and high time-rate-of-change of current, di/dt. The fast closing switch can be used in pulsed power applications.

  3. Method for reducing power consumption in a state retaining circuit, state reaining circuit and electronic device.

    NARCIS (Netherlands)

    2006-01-01

    A method for reducing the power consumption in a state retaining circuit during a standby mode is disclosed comprising, in an active state, providing a regular power supply (VDD) and a standby power supply (VDD STANDBY) to the state retaining circuit; for a transition from an active state to a

  4. An Empirical Method to Fuse Partially Overlapping State Vectors for Distributed State Estimation

    NARCIS (Netherlands)

    Sijs, J.; Hanebeck, U.; Noack, B.

    2013-01-01

    State fusion is a method for merging multiple estimates of the same state into a single fused estimate. Dealing with multiple estimates is one of the main concerns in distributed state estimation, where an estimated value of the desired state vector is computed in each node of a networked system.

  5. ANALYSIS OF THE CURRENT STATE OF INCOME AND EXPENDITURE STRUCTURE OF THE POPULATION IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Svitlana Sliusar

    2017-09-01

    Full Text Available The article is a study of the current state of the income and expenditure structure of the population in Ukraine, in particular, the level of income and expenditure in the context of national integration into the world economy. The purpose of the study in the article is to analyse the current state of the income and expenditure structure of the population in Ukraine in the context of national integration into the world economy. The object of the research is the financial provision of the population of Ukraine; the subject is the dynamics of the structure of incomes and expenditures of the population of Ukraine. Methodology. During the writing of the article, the following research methods are used: the search for available methodological and scientific literature, comparison, clarification of causal relationships, systematization, analysis of documentation and results of researchers’ work on the problem of the conducted research and expert evaluation. Results. During the research, it is observed that social security and wages rank one of the most important places in the income structure. So they are stressed. Social security includes pensions and various types of benefits (temporary disability, pregnancy and childbirth, child care up to 3 years of age, caring for a sick child, burial, assistance for disabled people whose income is less than the established limit of low income, etc.. Social security also provides for the provision of assistance in kind (care for the disabled, elderly people in specialized institutions – at boarding houses and at home. In Soviet times, all social payments were made exclusively by the state. It is established that sources of financing social protection services and social security, in accordance with the Budget Code of Ukraine, are state and local budgets. Expenditures of social orientation include expenditures on health care, spiritual and physical development, education, social protection and social security

  6. Methods of amorphization and investigation of the amorphous state

    OpenAIRE

    EINFALT, TOMAŽ; PLANINŠEK, ODON; HROVAT, KLEMEN

    2013-01-01

    The amorphous form of pharmaceutical materials represents the most energetic solid state of a material. It provides advantages in terms of dissolution rate and bioavailability. This review presents the methods of solid-state amorphization described in literature (supercooling of liquids, milling, lyophilization, spray drying, dehydration of crystalline hydrates), with the emphasis on milling. Furthermore, we describe how amorphous state of pharmaceuticals differ depending on method of prepara...

  7. Assessment of Energy Production Potential from Ocean Currents along the United States Coastline

    Energy Technology Data Exchange (ETDEWEB)

    Haas, Kevin A. [Georgia Inst. of Technology, Atlanta, GA (United States)

    2013-10-03

    Increasing energy consumption and depleting reserves of fossil fuels have resulted in growing interest in alternative renewable energy from the ocean. Ocean currents are an alternative source of clean energy due to their inherent reliability, persistence and sustainability. General ocean circulations exist in the form of large rotating ocean gyres, and feature extremely rapid current flow in the western boundaries due to the Coriolis Effect. The Gulf Stream system is formed by the western boundary current of the North Atlantic Ocean that flows along the east coastline of the United States, and therefore is of particular interest as a potential energy resource for the United States.

  8. Current Tobacco Use Among Adults in the United States: Findings From the National Adult Tobacco Survey

    Science.gov (United States)

    Dube, Shanta R.; Tynan, Michael A.

    2012-01-01

    Objectives. We assessed the prevalence and sociodemographic correlates of tobacco use among US adults. Methods. We used data from the 2009–2010 National Adult Tobacco Survey, a national landline and cell phone survey of adults aged 18 years and older, to estimate current use of any tobacco; cigarettes; cigars, cigarillos, or small cigars; chewing tobacco, snuff, or dip; water pipes; snus; and pipes. We stratified estimates by gender, age, race/ethnicity, education, income, sexual orientation, and US state. Results. National prevalence of current use was 25.2% for any tobacco; 19.5% for cigarettes; 6.6% for cigars, cigarillos, or small cigars; 3.4% for chewing tobacco, snuff, or dip; 1.5% for water pipes; 1.4% for snus; and 1.1% for pipes. Tobacco use was greatest among respondents who were male, younger, of non-Hispanic “other” race/ethnicity, less educated, less wealthy, and lesbian, gay, bisexual, or transgender. Prevalence ranged from 14.1% (Utah) to 37.4% (Kentucky). Conclusions. Tobacco use varies by geography and sociodemographic factors, but remains prevalent among US adults. Evidence-based prevention strategies are needed to decrease tobacco use and the health and economic burden of tobacco-related diseases. PMID:22994278

  9. WE-D-BRB-03: Current State of Volumetric Image Guidance for Proton Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Hua, C. [St. Jude Children’s Research Hospital (United States)

    2016-06-15

    The goal of this session is to review the physics of proton therapy, treatment planning techniques, and the use of volumetric imaging in proton therapy. The course material covers the physics of proton interaction with matter and physical characteristics of clinical proton beams. It will provide information on proton delivery systems and beam delivery techniques for double scattering (DS), uniform scanning (US), and pencil beam scanning (PBS). The session covers the treatment planning strategies used in DS, US, and PBS for various anatomical sites, methods to address uncertainties in proton therapy and uncertainty mitigation to generate robust treatment plans. It introduces the audience to the current status of image guided proton therapy and clinical applications of CBCT for proton therapy. It outlines the importance of volumetric imaging in proton therapy. Learning Objectives: Gain knowledge in proton therapy physics, and treatment planning for proton therapy including intensity modulated proton therapy. The current state of volumetric image guidance equipment in proton therapy. Clinical applications of CBCT and its advantage over orthogonal imaging for proton therapy. B. Teo, B.K Teo had received travel funds from IBA in 2015.

  10. Review: Semen sexing - current state of the art with emphasis on bovine species.

    Science.gov (United States)

    Vishwanath, R; Moreno, J F

    2018-06-01

    It is approaching three decades since the first public evidence of sex-sorting of semen. The technology has progressed considerably since then with a number of institutions and researchers collaborating to eventually bring this to application. The technical challenges have been quite substantial and in the early years the application was limited to only heifer inseminations. Comparable fertility of sex-sorted semen with conventional semen has been an aspirational benchmark for the industry for many years. Significant investment in research in the primary biology of sex-sorted sperm and associated sorting equipment ensured steady progress over the years and current methods particularly the new SexedULTRA-4M™ seems to have now mostly bridged this fertility gap. The dairy and beef industry have adopted this technology quite rapidly. Other animal industries are progressively testing it for application in their specific niches and environments. The current state of the art in the fundamentals of sex-sorting, the biology of the process as well as new developments in machinery are described in this review.

  11. WE-D-BRB-03: Current State of Volumetric Image Guidance for Proton Therapy

    International Nuclear Information System (INIS)

    Hua, C.

    2016-01-01

    The goal of this session is to review the physics of proton therapy, treatment planning techniques, and the use of volumetric imaging in proton therapy. The course material covers the physics of proton interaction with matter and physical characteristics of clinical proton beams. It will provide information on proton delivery systems and beam delivery techniques for double scattering (DS), uniform scanning (US), and pencil beam scanning (PBS). The session covers the treatment planning strategies used in DS, US, and PBS for various anatomical sites, methods to address uncertainties in proton therapy and uncertainty mitigation to generate robust treatment plans. It introduces the audience to the current status of image guided proton therapy and clinical applications of CBCT for proton therapy. It outlines the importance of volumetric imaging in proton therapy. Learning Objectives: Gain knowledge in proton therapy physics, and treatment planning for proton therapy including intensity modulated proton therapy. The current state of volumetric image guidance equipment in proton therapy. Clinical applications of CBCT and its advantage over orthogonal imaging for proton therapy. B. Teo, B.K Teo had received travel funds from IBA in 2015.

  12. Anti-HIV therapy with AZT prodrugs: AZT phosphonate derivatives, current state and prospects.

    Science.gov (United States)

    Khandazhinskaya, Anastasiya; Matyugina, Elena; Shirokova, Elena

    2010-06-01

    AIDS, a disease caused by human immunodeficiency virus, was called 'plague of the twentieth century'. 3'-Azido-3'-deoxythymidine (AZT), the first compound approved for the treatment of HIV, is still a mandatory component of treatment schemes. However, its toxicity stimulated a search for new agents. This review presents the history and current state of the design of AZT prodrugs based on its phosphonate derivatives. Although every effort was made to include as many AZT structures bearing phosphonate residues and demonstrate the variety they offer, we also concentrated on the studies performed in our laboratory. Special attention was also paid to AZT 5'-H-phosphonate (phosphazide, Nikavir) approved in the Russian Federation as a drug for the prevention and treatment of HIV infection. The prodrug strategy applied to AZT phosphonate derivatives enriched chemistry, biology and medicine not only with new knowledge, methods and structures, but also with a new anti-HIV drug Nikavir. Currently, study of another phosphonate, AZT 5'-aminocarbonylphosphonate, is underway. Slow release of AZT following oral administration and penetration into cells, decreased toxicity and the lack of cumulative properties make the compounds of this group promising as extended-release forms of AZT.

  13. High ion charge states in a high-current, short-pulse, vacuum ARC ion sources

    International Nuclear Information System (INIS)

    Anders, A.; Brown, I.; MacGill, R.; Dickinson, M.

    1996-01-01

    Ions of the cathode material are formed at vacuum arc cathode spots and extracted by a grid system. The ion charge states (typically 1-4) depend on the cathode material and only little on the discharge current as long as the current is low. Here the authors report on experiments with short pulses (several μs) and high currents (several kA); this regime of operation is thus approaching a more vacuum spark-like regime. Mean ion charge states of up to 6.2 for tungsten and 3.7 for titanium have been measured, with the corresponding maximum charge states of up to 8+ and 6+, respectively. The results are discussed in terms of Saha calculations and freezing of the charge state distribution

  14. High ion charge states in a high-current, short-pulse, vacuum arc ion source

    International Nuclear Information System (INIS)

    Anders, A.; Brown, I.; MacGill, R.; Dickinson, M.

    1995-09-01

    Ions of the cathode material are formed at vacuum arc cathode spots and extracted by a grid system. The ion charge states (typically 1--4) depend on the cathode material and only little on the discharge current as long as the current is low. Here the authors report on experiments with short pulses (several micros) and high currents (several kA); this regime of operation is thus approaching a more vacuum spark-like regime. Mean ion charge states of up to 6.2 for tungsten and 3.7 for titanium have been measured, with the corresponding maximum charge states of up to 8+ and 6+, respectively. The results are discussed in terms of Saha calculations and freezing of the charge state distribution

  15. Limitations Of The Current State Space Modelling Approach In Multistage Machining Processes Due To Operation Variations

    Science.gov (United States)

    Abellán-Nebot, J. V.; Liu, J.; Romero, F.

    2009-11-01

    The State Space modelling approach has been recently proposed as an engineering-driven technique for part quality prediction in Multistage Machining Processes (MMP). Current State Space models incorporate fixture and datum variations in the multi-stage variation propagation, without explicitly considering common operation variations such as machine-tool thermal distortions, cutting-tool wear, cutting-tool deflections, etc. This paper shows the limitations of the current State Space model through an experimental case study where the effect of the spindle thermal expansion, cutting-tool flank wear and locator errors are introduced. The paper also discusses the extension of the current State Space model to include operation variations and its potential benefits.

  16. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

    Directory of Open Access Journals (Sweden)

    Nadeem Khan

    2014-03-01

    Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

  17. Device and Method for Continuously Equalizing the Charge State of Lithium Ion Battery Cells

    Science.gov (United States)

    Schwartz, Paul D. (Inventor); Martin, Mark N. (Inventor); Roufberg, Lewis M. (Inventor)

    2015-01-01

    A method of equalizing charge states of individual cells in a battery includes measuring a previous cell voltage for each cell, measuring a previous shunt current for each cell, calculating, based on the previous cell voltage and the previous shunt current, an adjusted cell voltage for each cell, determining a lowest adjusted cell voltage from among the calculated adjusted cell voltages, and calculating a new shunt current for each cell.

  18. Method Ideology and State: Approximations based on Marx’s legacy

    Directory of Open Access Journals (Sweden)

    Davi Machado Perez

    2018-02-01

    Full Text Available This essay is the fruit of bibliographic research and offers reflections about the Marxist concepts of method, ideology and state, to question the idea that there is an economic determinism in the work of Karl Marx. It then dialogs with current Marxist authors who address the state in the era of monopoly capitalism, reaffirming Marx’s legacy as an essential starting point for the development of studies about the modern and contemporary state.

  19. Methods to determine hydration states of minerals and cement hydrates

    Energy Technology Data Exchange (ETDEWEB)

    Baquerizo, Luis G., E-mail: luis.baquerizoibarra@holcim.com [Innovation, Holcim Technology Ltd., CH-5113 Holderbank (Switzerland); Matschei, Thomas [Innovation, Holcim Technology Ltd., CH-5113 Holderbank (Switzerland); Scrivener, Karen L. [Laboratory of Construction Materials, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne (Switzerland); Saeidpour, Mahsa; Thorell, Alva; Wadsö, Lars [Building Materials, Lund University, Box 124, 221 000 Lund (Sweden)

    2014-11-15

    This paper describes a novel approach to the quantitative investigation of the impact of varying relative humidity (RH) and temperature on the structure and thermodynamic properties of salts and crystalline cement hydrates in different hydration states (i.e. varying molar water contents). The multi-method approach developed here is capable of deriving physico-chemical boundary conditions and the thermodynamic properties of hydrated phases, many of which are currently missing from or insufficiently reported in the literature. As an example the approach was applied to monosulfoaluminate, a phase typically found in hydrated cement pastes. New data on the dehydration and rehydration of monosulfoaluminate are presented. Some of the methods used were validated with the system Na{sub 2}SO{sub 4}–H{sub 2}O and new data related to the absorption of water by anhydrous sodium sulfate are presented. The methodology and data reported here should permit better modeling of the volume stability of cementitious systems exposed to various different climatic conditions.

  20. Methods to determine hydration states of minerals and cement hydrates

    International Nuclear Information System (INIS)

    Baquerizo, Luis G.; Matschei, Thomas; Scrivener, Karen L.; Saeidpour, Mahsa; Thorell, Alva; Wadsö, Lars

    2014-01-01

    This paper describes a novel approach to the quantitative investigation of the impact of varying relative humidity (RH) and temperature on the structure and thermodynamic properties of salts and crystalline cement hydrates in different hydration states (i.e. varying molar water contents). The multi-method approach developed here is capable of deriving physico-chemical boundary conditions and the thermodynamic properties of hydrated phases, many of which are currently missing from or insufficiently reported in the literature. As an example the approach was applied to monosulfoaluminate, a phase typically found in hydrated cement pastes. New data on the dehydration and rehydration of monosulfoaluminate are presented. Some of the methods used were validated with the system Na 2 SO 4 –H 2 O and new data related to the absorption of water by anhydrous sodium sulfate are presented. The methodology and data reported here should permit better modeling of the volume stability of cementitious systems exposed to various different climatic conditions

  1. Methodical approaches to development of classification state methods of regulation business activity in fishery

    OpenAIRE

    She Son Gun

    2014-01-01

    Approaches to development of classification of the state methods of regulation of economy are considered. On the basis of the provided review the complex method of state regulation of business activity is reasonable. The offered principles allow improving public administration and can be used in industry concepts and state programs on support of small business in fishery.

  2. Methods and systems for thermodynamic evaluation of battery state of health

    Science.gov (United States)

    Yazami, Rachid; McMenamin, Joseph; Reynier, Yvan; Fultz, Brent T

    2014-12-02

    Described are systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and battery systems and for characterizing the state of health of electrodes and battery systems. Measurement of physical attributes of electrodes and batteries corresponding to thermodynamically stabilized electrode conditions permit determination of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and battery systems, such as energy, power density, current rate, cycle life and state of health. Also provided are systems and methods for charging a battery according to its state of health.

  3. The integrated circuit IC EMP transient state disturbance effect experiment method investigates

    International Nuclear Information System (INIS)

    Li Xiaowei

    2004-01-01

    Transient state disturbance characteristic study on the integrated circuit, IC, need from its coupling path outset. Through cable (aerial) coupling, EMP converts to an pulse current voltage and results in the impact to the integrated circuit I/O orifice passing the cable. Aiming at the armament system construction feature, EMP effect to the integrated circuit, IC inside the system is analyzed. The integrated circuit, IC EMP effect experiment current injection method is investigated and a few experiments method is given. (authors)

  4. Investigation of unstable periodic space-time states in distributed active system with supercritical current

    International Nuclear Information System (INIS)

    Koronovskij, A.A.; Rempen, I.S.; Khramov, A.E.

    2003-01-01

    The set of the unstable periodic space-time states, characterizing the chaotic space-time dynamics of the electron beam with the supercritical current in the Pierce diode is discussed. The Lyapunov indicators of the revealed instable space-time states of the chaotic dynamics of the distributed self-excited system are calculated. It is shown that change in the set of the unstable periodic states in dependence on the Pierce parameter is determined by change in the various orbits stability, which is demonstrated by the values of senior Lyapunov unstable state index [ru

  5. The current state of knowledge on the use of the benchmark dose concept in risk assessment.

    Science.gov (United States)

    Sand, Salomon; Victorin, Katarina; Filipsson, Agneta Falk

    2008-05-01

    This review deals with the current state of knowledge on the use of the benchmark dose (BMD) concept in health risk assessment of chemicals. The BMD method is an alternative to the traditional no-observed-adverse-effect level (NOAEL) and has been presented as a methodological improvement in the field of risk assessment. The BMD method has mostly been employed in the USA but is presently given higher attention also in Europe. The review presents a number of arguments in favor of the BMD, relative to the NOAEL. In addition, it gives a detailed overview of the several procedures that have been suggested and applied for BMD analysis, for quantal as well as continuous data. For quantal data the BMD is generally defined as corresponding to an additional or extra risk of 5% or 10%. For continuous endpoints it is suggested that the BMD is defined as corresponding to a percentage change in response relative to background or relative to the dynamic range of response. Under such definitions, a 5% or 10% change can be considered as default. Besides how to define the BMD and its lower bound, the BMDL, the question of how to select the dose-response model to be used in the BMD and BMDL determination is highlighted. Issues of study design and comparison of dose-response curves and BMDs are also covered. Copyright (c) 2007 John Wiley & Sons, Ltd.

  6. A Sweep-Line Method for State Space Exploration

    DEFF Research Database (Denmark)

    Christensen, Søren; Kristensen, Lars Michael; Mailund, Thomas

    2001-01-01

    generation, since these states can never be reached again. This in turn reduces the memory used for state space storage during the task of verification. Examples of progress measures are sequence numbers in communication protocols and time in certain models with time. We illustrate the application...... of the method on a number of Coloured Petri Net models, and give a first evaluation of its practicality by means of an implementation based on the Design/CPN state space tool. Our experiments show significant reductions in both space and time used during state space exploration. The method is not specific...... to Coloured Petri Nets but applicable to a wide range of modelling languages....

  7. Integrated and Inclusive Higher Education in Vladimir State University: Current State and Development Perspectives

    Directory of Open Access Journals (Sweden)

    Yegorov I.N.,

    2017-08-01

    Full Text Available The paper summarizes the many years of experience in methodological support and training at the Center of Professional Education for the Disabled and at the “Inclusive Education” Research and Educational Center of the Vladimir State University. At these centers the work is aimed at establishing a system of continuous higher inclusive education for persons with hearing and visual impairments. The paper focuses on the issues concerning the organization of educational process and the adaptation of learning materials for students with hearing and visual impairments; it addresses the problem of creating a system of academic support for students with disabilities and providing psychological and educational assistance to individuals with hearing and visual impairments in the system of higher education.

  8. Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, J.; Bird, L.

    2012-11-01

    Currently, 29 states, the District of Columbia, and Puerto Rico have instituted a renewable portfolio standard (RPS). An RPS sets a minimum threshold for how much renewable energy must be generated in a given year. Each state policy is unique, varying in percentage targets, timetables, and eligible resources. This paper examines state experience with implementing renewable portfolio standards that include energy efficiency, thermal resources, and non-renewable energy and explores compliance experience, costs, and how states evaluate, measure, and verify energy efficiency and convert thermal energy. It aims to gain insights from the experience of states for possible federal clean energy policy as well as to share experience and lessons for state RPS implementation.

  9. Ukraine National Energy Current State and Modelling its Long-Term Development

    International Nuclear Information System (INIS)

    Shulzhenko, S.

    2016-01-01

    Structure of Ukrainian energy sector, its current challenges, drivers of its development and possible long-term pathways, and methodological approaches and methods of mathematical modelling of long-term national energy development.(author).

  10. Education technology with continuous real time monitoring of the current functional and emotional students' states

    Science.gov (United States)

    Alyushin, M. V.; Kolobashkina, L. V.

    2017-01-01

    The education technology with continuous monitoring of the current functional and emotional students' states is suggested. The application of this technology allows one to increase the effectiveness of practice through informed planning of the training load. For monitoring the current functional and emotional students' states non-contact remote technologies of person bioparameters registration are encouraged to use. These technologies are based on recording and processing in real time the main person bioparameters in a purely passive mode. Experimental testing of this technology has confirmed its effectiveness.

  11. High magnetic field science and its application in the United States current status and future directions

    CERN Document Server

    National Research Council of the National Academies

    2013-01-01

    The Committee to Assess the Current Status and Future Direction of High Magnetic Field Science in the United States was convened by the National Research Council in response to a request by the National Science Foundation. This report answers three questions: (1) What is the current state of high-field magnet science, engineering, and technology in the United States, and are there any conspicuous needs to be addressed? (2) What are the current science drivers and which scientific opportunities and challenges can be anticipated over the next ten years? (3) What are the principal existing and planned high magnetic field facilities outside of the United States, what roles have U.S. high field magnet development efforts played in developing those facilities, and what potentials exist for further international collaboration in this area? A magnetic field is produced by an electrical current in a metal coil. This current exerts an expansive force on the coil, and a magnetic field is "high" if it challenges the str...

  12. What is the current state of scientific knowledge with regard to seasonal and decadal forecasting?

    International Nuclear Information System (INIS)

    Smith, Doug M; Scaife, Adam A; Kirtman, Ben P

    2012-01-01

    Environmental factors, such as the frequency, intensity and duration of extreme weather events, are important drivers of migration and displacement of people. There is therefore a growing need for regional climate predictions for the coming seasons to decades. This paper reviews the current state of the art of seasonal to decadal climate prediction, focusing on the potential sources of skill, forecasting techniques, current capability and future prospects. (letter)

  13. Current state of methodological and decisions for radiation treatment of blood, its components and products

    OpenAIRE

    Gordeev A.V.; Naumova L.A.; Kharitonov S.V.

    2014-01-01

    This article presents currently used blood transfusion media — components and blood products, therapeutic effects, reactions and complications of blood transfusion, use of radiation treatment for blood transfusion fluids. There had been discussed in detail the practice of radiation processing of blood components and for the prevention of reaction "graft versus host" and studies of plasma radiation treatment for its infectious safety. There was presented the current state of techniques and tec...

  14. Estimation methods for nonlinear state-space models in ecology

    DEFF Research Database (Denmark)

    Pedersen, Martin Wæver; Berg, Casper Willestofte; Thygesen, Uffe Høgsbro

    2011-01-01

    The use of nonlinear state-space models for analyzing ecological systems is increasing. A wide range of estimation methods for such models are available to ecologists, however it is not always clear, which is the appropriate method to choose. To this end, three approaches to estimation in the theta...... logistic model for population dynamics were benchmarked by Wang (2007). Similarly, we examine and compare the estimation performance of three alternative methods using simulated data. The first approach is to partition the state-space into a finite number of states and formulate the problem as a hidden...... Markov model (HMM). The second method uses the mixed effects modeling and fast numerical integration framework of the AD Model Builder (ADMB) open-source software. The third alternative is to use the popular Bayesian framework of BUGS. The study showed that state and parameter estimation performance...

  15. On the principal state method for runlength limited sequences

    NARCIS (Netherlands)

    Tjalkens, T.J.

    1994-01-01

    Presents a detailed result on Franaszek's (1968) principal state method for the generation of run-length constrained codes. The authors show that, whenever the constraints k and d satisfy k 2d>0, the set of "principal states" is s0, s1, ···, sk-1. Thus there is no need for Franaszek's search

  16. A comparison of ancestral state reconstruction methods for quantitative characters.

    Science.gov (United States)

    Royer-Carenzi, Manuela; Didier, Gilles

    2016-09-07

    Choosing an ancestral state reconstruction method among the alternatives available for quantitative characters may be puzzling. We present here a comparison of seven of them, namely the maximum likelihood, restricted maximum likelihood, generalized least squares under Brownian, Brownian-with-trend and Ornstein-Uhlenbeck models, phylogenetic independent contrasts and squared parsimony methods. A review of the relations between these methods shows that the maximum likelihood, the restricted maximum likelihood and the generalized least squares under Brownian model infer the same ancestral states and can only be distinguished by the distributions accounting for the reconstruction uncertainty which they provide. The respective accuracy of the methods is assessed over character evolution simulated under a Brownian motion with (and without) directional or stabilizing selection. We give the general form of ancestral state distributions conditioned on leaf states under the simulation models. Ancestral distributions are used first, to give a theoretical lower bound of the expected reconstruction error, and second, to develop an original evaluation scheme which is more efficient than comparing the reconstructed and the simulated states. Our simulations show that: (i) the distributions of the reconstruction uncertainty provided by the methods generally make sense (some more than others); (ii) it is essential to detect the presence of an evolutionary trend and to choose a reconstruction method accordingly; (iii) all the methods show good performances on characters under stabilizing selection; (iv) without trend or stabilizing selection, the maximum likelihood method is generally the most accurate. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. The glenoid track: a review of the clinical relevance, method of calculation and current evidence behind this method

    Energy Technology Data Exchange (ETDEWEB)

    Younan, Yara; Wong, Philip K.; Umpierrez, Monica; Gonzalez, Felix; Singer, Adam Daniel [Emory University Hospital, Department of Radiology and Imaging Sciences, Section of Musculoskeletal Imaging, Atlanta, GA (United States); Karas, Spero [Emory University Hospital, Department of Orthopedic Surgery, Atlanta, GA (United States); Jose, Jean [University of Miami, Department of Radiology, Miami, FL (United States)

    2017-12-15

    In the setting of bipolar bone injury, orthopedic surgeons are currently making use of the glenoid track method to guide surgical management. Using preoperative CT or MR imaging, this method allows the identification of patients who are more likely to fail a primary capsuloligamentous Bankart repair. As the glenoid track method becomes increasingly used in preoperative planning, it is important for the radiologist to become familiar with its concept and method of calculation. This review article aims to concisely summarize the current literature and the clinical implications of the glenoid track method. (orig.)

  18. Robust method for stator current reconstruction from DC link in a ...

    African Journals Online (AJOL)

    Using the switching signals and dc link current, this paper presents a new algorithm for the reconstruction of stator currents of an inverter-fed, three-phase induction motor drive. Unlike the classical and improved methods available in literature, the proposed method is neither based on pulse width modulation pattern ...

  19. Levitation of current carrying states in the lattice model for the integer quantum Hall effect.

    Science.gov (United States)

    Koschny, T; Potempa, H; Schweitzer, L

    2001-04-23

    The disorder driven quantum Hall to insulator transition is investigated for a two-dimensional lattice model. The Hall conductivity and the localization length are calculated numerically near the transition. For uncorrelated and weakly correlated disorder potentials the current carrying states are annihilated by the negative Chern states originating from the band center. In the presence of correlated disorder potentials with correlation length larger than approximately half the lattice constant the floating up of the critical states in energy without merging is observed. This behavior is similar to the levitation scenario proposed for the continuum model.

  20. Detection of defect states responsible for leakage current in ultrathin tantalum pentoxide (Ta2O5) films by zero-bias thermally stimulated current spectroscopy

    International Nuclear Information System (INIS)

    Lau, W.S.; Zhong, L.; Lee, A.; See, C.H.; Han, T.; Sandler, N.P.; Chong, T.C.

    1997-01-01

    Defect states responsible for leakage current in ultrathin (physical thickness 2 O 5 ) films were measured with a novel zero-bias thermally stimulated current technique. It was found that defect states A, whose activation energy was estimated to be about 0.2 eV, can be more efficiently suppressed by using N 2 O rapid thermal annealing (RTA) instead of using O 2 RTA for postdeposition annealing. The leakage current was also smaller for samples with N 2 O RTA than those with O 2 RTA for postdeposition annealing. Hence, defect states A are quite likely to be important in causing leakage current. copyright 1997 American Institute of Physics

  1. THE CURRENT STATE OF STUDY OF PLANTS OF HEDYSARUM L. FLORAE OF THE CAUCASUS

    Directory of Open Access Journals (Sweden)

    D. R. Imachuyeva

    2016-01-01

    Full Text Available The article presents an overview of the ecological-botanical research and the current state of knowledge of species of the genus Hedysarum L. of the legume family (Fabaceae grown in the Caucasus.The aim of the study was the review of the information contained in open sources about the basic ecological and Botanical characteristics, geographic specie of habitat and phytocoenotic specie of species of the genus Hedysarum growing in the Caucasus.Materials and methods. The study was conducted using information retrieval (PubMed, ScholarGoogle, library databases (eLibrary, Cyberleninca, RGB, VINITI, SOCIONET, ReseachGate, PubMed, Web of Sciences, SCOPUS, RNMJ.RU, UlrichsWEB, EBSCO, Scientific library of the Botanical Institute of RAS as well as the results of our research.Results: the review study of species of the genus Hedysarum L. of the legume family (Fabaceae grown in the Caucasus.Conclusion: the results of the analysis of regional floras, morphological characteristics, the main ecological and botanical characteristics of these 16 species, the geographic specie of habitat, phytocenotic specie are presented.

  2. The current state of Lean implementation in health care: literature review.

    Science.gov (United States)

    Poksinska, Bozena

    2010-01-01

    The purpose of this article is to discuss the current state of implementation of Lean production in health care. The study focuses on the definition of Lean in health care and implementation process, barriers, challenges, enablers, and outcomes of implementing Lean production methods in health care. A comprehensive search of the literature concerning the implementation of Lean production in health care was used to generate a synthesis of the literature around the chosen research questions. Lean production in health care is mostly used as a process improvement approach and focuses on 3 main areas: (1) defining value from the patient point of view, (2) mapping value streams, and (3) eliminating waste in an attempt to create continuous flow. Value stream mapping is the most frequently applied Lean tool in health care. The usual implementation steps include conducting Lean training, initiating pilot projects, and implementing improvements using interdisciplinary teams. One of the barriers is lack of educators and consultants who have their roots in the health care sector and can provide support by sharing experience and giving examples from real-life applications of Lean in health care. The enablers of Lean in health care seem not to be different from the enablers of any other change initiative. The outcomes can be divided into 2 broad areas: the performance of the health care system and the development of employees and work environment.

  3. Laparoscopic Hepatectomy: Current State in Japan Based on the 4th Nationwide Questionnaire

    Directory of Open Access Journals (Sweden)

    Yutaka Takahashi

    2017-01-01

    Full Text Available Purpose. Since laparoscopic hepatectomy (LH became covered by national health insurance in April 2010 in Japan, the numbers of applied cases and institutions performing it have increased and the indication has expanded. We surveyed the current state and safety of LH in Japan. Methods. A questionnaire survey was performed in 41 institutions related to the Japanese Endoscopic Liver Surgery Study Group and 747 institutions certified by the Japanese Society of Gastroenterological Surgery, and responses concerning all 2962 cases of LH performed by August 2011 were obtained. Results. The surgical procedure employed was hemihepatectomy in 234 (8%, segmentectomy in 88 (3%, left lateral segmentectomy in 434 (15%, segmentectomy in 156 (5%, and partial resection in 1504 (51% cases. The approach was pure laparoscopy in 1835 (63%, hand-assisted laparoscopic surgery in 201 (7%, and laparoscopy-assisted surgery in 926 (31%. Regarding perioperative complications, surgery was switched to laparotomy in 59 (2.0%, reoperation was performed in 4 (0.1%, and surgery-related death occurred in 2 (0.07%. Intraoperative accidents occurred in 68 (2.3%, and postoperative complications developed in 94 (3.2%. Conclusions. When the selection of cases is appropriate, LH for liver diseases can be safely performed.

  4. Improvement of Power Flow Calculation with Optimization Factor Based on Current Injection Method

    Directory of Open Access Journals (Sweden)

    Lei Wang

    2014-01-01

    Full Text Available This paper presents an improvement in power flow calculation based on current injection method by introducing optimization factor. In the method proposed by this paper, the PQ buses are represented by current mismatches while the PV buses are represented by power mismatches. It is different from the representations in conventional current injection power flow equations. By using the combined power and current injection mismatches method, the number of the equations required can be decreased to only one for each PV bus. The optimization factor is used to improve the iteration process and to ensure the effectiveness of the improved method proposed when the system is ill-conditioned. To verify the effectiveness of the method, the IEEE test systems are tested by conventional current injection method and the improved method proposed separately. Then the results are compared. The comparisons show that the optimization factor improves the convergence character effectively, especially that when the system is at high loading level and R/X ratio, the iteration number is one or two times less than the conventional current injection method. When the overloading condition of the system is serious, the iteration number in this paper appears 4 times less than the conventional current injection method.

  5. Current State of History of Psychology Teaching and Education in Argentina: An Empirical Bibliometric Investigation

    Science.gov (United States)

    Fierro, Catriel; Ostrovsky, Ana Elisa; Di Doménico, María Cristina

    2018-01-01

    This study is an empirical analysis of the field's current state in Argentinian universities. Bibliometric parameters were used to retrieve the total listed texts (N = 797) of eight undergraduate history courses' syllabi from Argentina's most populated public university psychology programs. Then, professors in charge of the selected courses (N =…

  6. The State of Knowledge of Outdoor Orientation Programs: Current Practices, Research, and Theory

    Science.gov (United States)

    Bell, Brent J.; Gass, Michael A.; Nafziger, Christopher S.; Starbuck, J. David

    2014-01-01

    Outdoor orientation programs represent a prominent area of experiential education with over 25,000 participants annually. More than 191 outdoor orientation programs currently operate in the United States and Canada. The research examining outdoor orientation programs consists of 25 peer-reviewed published studies and 11 dissertations. A new theory…

  7. Globalization of Gerontology Education: Current Practices and Perceptions for Graduate Gerontology Education in the United States

    Science.gov (United States)

    Mwangi, Samuel M.; Yamashita, Takashi; Ewen, Heidi H.; Manning, Lydia K.; Kunkel, Suzanne R.

    2012-01-01

    The purpose of this study is to document current practices and understandings about globalization of gerontology education in the United States. Better understanding of aging requires international perspectives in global communities. However, little is known about how globalization of gerontology education is practiced in U.S. graduate-level…

  8. Comment on: "Current-voltage characteristics and zero-resistance state in 2DEG"

    OpenAIRE

    Cheremisin, M. V.

    2003-01-01

    We demonstrate that N(S)-shape current-voltage characteristics proposed to explain zero-resistance state in Corbino(Hall bar) geometry 2DEG (cond-mat/0302063, cond-mat/0303530) cannot account essential features of radiation-induced magnetoresistance oscillations experiments.

  9. Evaluation of current state of amplification-based DDoS attacks

    NARCIS (Netherlands)

    Bohte, Edgar; Stamatogiannakis, Manolis; Bos, Herbert

    2018-01-01

    Amplification-based DDoS attacks are still a big threat to the availability of the internet. In quite some time there is no new paper published that gave an update on the current state of amplification DDoS attacks, taken into consideration it was a huge problem a few years ago. We performed

  10. The Current State of Empirical Support for the Pharmacological Treatment of Selective Mutism

    Science.gov (United States)

    Carlson, John S.; Mitchell, Angela D.; Segool, Natasha

    2008-01-01

    This article reviews the current state of evidence for the psychopharmacological treatment of children diagnosed with selective mutism within the context of its link to social anxiety disorder. An increased focus on potential medication treatment for this disorder has resulted from significant monetary and resource limitations in typical practice,…

  11. Atlas of current and potential future distributions of common trees of the eastern United States

    Science.gov (United States)

    Louis R. Iverson; Anantha M. Prasad; Betsy J. Hale; Elaine Kennedy Sutherland

    1999-01-01

    This atlas documents the current and possible future distribution of 80 common tree species in the Eastern United States and gives detailed information on environmental characteristics defining these distributions. Also included are outlines of life history characteristics and summary statistics for these species. Much of the data are derived from Forest Inventory and...

  12. Planning for Development in the Arab Gulf States: A content Analysis of Current Development Plans

    DEFF Research Database (Denmark)

    Hvidt, Martin

    2012-01-01

    Abstract: This paper analyses current development plans published by the GCC states (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates) in order to explore the region’s future growth trajectory: what barriers to growth are foreseen and how can they be anticipated; what...

  13. Educational Attainment in the United States: 2015. Population Characteristics. Current Population Reports. P20-578

    Science.gov (United States)

    Ryan, Camille L.; Bauman, Kurt

    2016-01-01

    This report provides a portrait of educational attainment in the United States based on data collected from the Current Population Survey (CPS). The report examines educational attainment of the adult population by demographic and social characteristics such as age, sex, race and Hispanic origin, and disability status, as well as differences in…

  14. Educational Attainment in the United States: 2009. Population Characteristics. Current Population Reports. P20-566

    Science.gov (United States)

    Ryan, Camille L.; Siebens, Julie

    2012-01-01

    This report provides a portrait of educational attainment in the United States based on data collected in the 2009 American Community Survey (ACS) and the 2005-2009 ACS 5-year estimates. It also uses data from the Annual Social and Economic Supplement (ASEC) to the Current Population Survey (CPS) collected in 2009 and earlier, as well as monthly…

  15. Early Childhood Inclusion in the United States: Goals, Current Status, and Future Directions

    Science.gov (United States)

    Guralnick, Michael J.; Bruder, Mary Beth

    2016-01-01

    The current status and future directions of early childhood inclusion in the United States are discussed from the perspective of 4 key goals: access, accommodations and feasibility, developmental progress, and social integration. Recommendations are put forward to promote inclusion goals emphasizing administrative structures, personnel…

  16. Short-rotation coppicing in France. Current state of research and prospects for future development

    Energy Technology Data Exchange (ETDEWEB)

    Bonduelle, P. (Association Foret Cellulose, Trelaze (France)); Bouvarel, L. (Institut National de la Recherche Agronomique, Olivet (France). Unite Experimentale Biomasse, Forestiere et Foret Paysanne); Petit, H. (Association pour la Rationalisation et la Mecanisation de l' Exploitation Forestiere, Fontainebleau (France)); Pierson, J. (Cellulose des Ardennes, Montemedy (France)); Savanne, D. (Agence de l' Environnement et de la Maitrise de l' Energie, 75 - Paris (France)); Sourie, J.C. (Institut National de la Recherche Agronomique, Grignon (France). Station d' Economie et de Sociologie Rurales)

    1992-01-01

    This article analyzes the current context and the prospects for crop development as well as offering a number of examples of short rotation coppicing projects. The industrial outlets created through state aid remain the primary driving force behind plantations at this time. (author)

  17. Dominant male song performance reflects current immune state in a cooperatively breeding songbird

    NARCIS (Netherlands)

    York, Jenny E.; Radford, Andrew N.; Groothuis, Ton G.; Young, Andrew J.

    Conspicuous displays are thought to have evolved as signals of individual quality, though precisely what they encode remains a focus of debate. While high quality signals may be produced by high quality individuals due to good genes or favourable early-life conditions, whether current immune state

  18. Numerical investigations on contactless methods for measuring critical current density in HTS: application of modified constitutive-relation method

    International Nuclear Information System (INIS)

    Kamitani, A.; Takayama, T.; Itoh, T.; Ikuno, S.

    2011-01-01

    A fast method is proposed for calculating the shielding current density in an HTS. The J-E constitutive relation is modified so as not to change the solution. A numerical code is developed on the basis of the proposed method. The permanent magnet method is successfully simulated by means of the code. A fast method has been proposed for calculating the shielding current density in a high-temperature superconducting thin film. An initial-boundary-value problem of the shielding current density cannot be always solved by means of the Runge-Kutta method even when an adaptive step-size control algorithm is incorporated to the method. In order to suppress an overflow in the algorithm, the J-E constitutive relation is modified so that its solution may satisfy the original constitutive relation. A numerical code for analyzing the shielding current density has been developed on the basis of this method and, as an application of the code, the permanent magnet method for measuring the critical current density has been investigated numerically.

  19. Luminescent materials: probing the excited state of emission centers by spectroscopic methods

    International Nuclear Information System (INIS)

    Mihóková, E; Nikl, M

    2015-01-01

    We review recent methods employed to study the excited state of rare-earth centers in various luminescent and scintillating materials. The focus is on processes that help determine localization of the excited state within the material band gap, namely photoionization and thermally stimulated ionization. Then the tunneling process between the luminescence center and the trapping state is addressed. We describe the experimental implementation of methods recently developed to study these processes. We report theoretical models helping the data interpretation. We also present application to currently investigated materials. (topical review)

  20. Heating and current drive requirements towards steady state operation in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Poli, F. M.; Kessel, C. E.; Gorelenkova, M. [Princeton Plasma Physics Laboratory, Princeton, NJ 08543 (United States); Bonoli, P. T. [MIT Plasma Science and Fusion Center, Cambridge, MA 02139 (United States); Batchelor, D. B. [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6169 (United States); Harvey, B.; Petrov, Y. [CompX, Box 2672, Del Mar, CA 92014 (United States)

    2014-02-12

    Steady state scenarios envisaged for ITER aim at optimizing the bootstrap current, while maintaining sufficient confinement and stability to provide the necessary fusion yield. Non-inductive scenarios will need to operate with Internal Transport Barriers (ITBs) in order to reach adequate fusion gain at typical currents of 9 MA. However, the large pressure gradients associated with ITBs in regions of weak or negative magnetic shear can be conducive to ideal MHD instabilities, reducing the no-wall limit. The E × B flow shear from toroidal plasma rotation is expected to be low in ITER, with a major role in the ITB dynamics being played by magnetic geometry. Combinations of H/CD sources that maintain weakly reversed magnetic shear profiles throughout the discharge are the focus of this work. Time-dependent transport simulations indicate that, with a trade-off of the EC equatorial and upper launcher, the formation and sustainment of quasi-steady state ITBs could be demonstrated in ITER with the baseline heating configuration. However, with proper constraints from peeling-ballooning theory on the pedestal width and height, the fusion gain and the maximum non-inductive current are below the ITER target. Upgrades of the heating and current drive system in ITER, like the use of Lower Hybrid current drive, could overcome these limitations, sustaining higher non-inductive current and confinement, more expanded ITBs which are ideal MHD stable.

  1. Heating and current drive requirements towards steady state operation in ITER

    Science.gov (United States)

    Poli, F. M.; Bonoli, P. T.; Kessel, C. E.; Batchelor, D. B.; Gorelenkova, M.; Harvey, B.; Petrov, Y.

    2014-02-01

    Steady state scenarios envisaged for ITER aim at optimizing the bootstrap current, while maintaining sufficient confinement and stability to provide the necessary fusion yield. Non-inductive scenarios will need to operate with Internal Transport Barriers (ITBs) in order to reach adequate fusion gain at typical currents of 9 MA. However, the large pressure gradients associated with ITBs in regions of weak or negative magnetic shear can be conducive to ideal MHD instabilities, reducing the no-wall limit. The E × B flow shear from toroidal plasma rotation is expected to be low in ITER, with a major role in the ITB dynamics being played by magnetic geometry. Combinations of H/CD sources that maintain weakly reversed magnetic shear profiles throughout the discharge are the focus of this work. Time-dependent transport simulations indicate that, with a trade-off of the EC equatorial and upper launcher, the formation and sustainment of quasi-steady state ITBs could be demonstrated in ITER with the baseline heating configuration. However, with proper constraints from peeling-ballooning theory on the pedestal width and height, the fusion gain and the maximum non-inductive current are below the ITER target. Upgrades of the heating and current drive system in ITER, like the use of Lower Hybrid current drive, could overcome these limitations, sustaining higher non-inductive current and confinement, more expanded ITBs which are ideal MHD stable.

  2. Analysis of transient state in HTS tapes under ripple DC load current

    Science.gov (United States)

    Stepien, M.; Grzesik, B.

    2014-05-01

    The paper concerns the analysis of transient state (quench transition) in HTS tapes loaded with the current having DC component together with a ripple component. Two shapes of the ripple were taken into account: sinusoidal and triangular. Very often HTS tape connected to a power electronic current supply (i.e. superconducting coil for SMES) that delivers DC current with ripples and it needs to be examined under such conditions. Additionally, measurements of electrical (and thermal) parameters under such ripple excitation is useful to tape characterization in broad range of load currents. The results presented in the paper were obtained using test bench which contains programmable DC supply and National Instruments data acquisition system. Voltage drops and load currents were measured vs. time. Analysis of measured parameters as a function of the current was used to tape description with quench dynamics taken into account. Results of measurements were also used to comparison with the results of numerical modelling based on FEM. Presented provisional results show possibility to use results of measurements in transient state to prepare inverse models of superconductors and their detailed numerical modelling.

  3. A Modified Droop Control Method for Parallel-Connected Current Source Inverters

    DEFF Research Database (Denmark)

    Wei, Baoze; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

    2016-01-01

    In this paper, a novel control method was proposed for current source inverters under the grid-connected working mode. The control scheme is based on a modified droop control method, with an additional current reference signal that will be generated instead of the voltage reference. Hence......, there is only a current control loop with droop control in the whole control scheme without voltage control loop. So it is very suitable for grid-connected current source inverter which will simplify the design of the control scheme and combine the advantage of droop control. The parallel configuration...... is widely used to acquire high power demand, but the circulating current problem is a key issue that should be considered. In this paper, a simulation based on parallel current source inverters using the proposed control scheme is provided. Simulation results showed that a good circulating current...

  4. Radiation-induced off-state leakage current in commercial power MOSFETs

    International Nuclear Information System (INIS)

    Dodd, Paul Emerson; Shaneyfelt, Marty Ray; Draper, Bruce Leroy; Felix, James Andrew; Schwank, James Ralph; Dalton, Scott Matthew

    2005-01-01

    The total dose hardness of several commercial power MOSFET technologies is examined. After exposure to 20 krad(SiO 2 ) most of the n- and p-channel devices examined in this work show substantial (2 to 6 orders of magnitude) increases in off-state leakage current. For the n-channel devices, the increase in radiation-induced leakage current follows standard behavior for moderately thick gate oxides, i.e., the increase in leakage current is dominated by large negative threshold voltage shifts, which cause the transistor to be partially on even when no bias is applied to the gate electrode. N-channel devices biased during irradiation show a significantly larger leakage current increase than grounded devices. The increase in leakage current for the p-channel devices, however, was unexpected. For the p-channel devices, it is shown using electrical characterization and simulation that the radiation-induced leakage current increase is related to an increase in the reverse bias leakage characteristics of the gated diode which is formed by the drain epitaxial layer and the body. This mechanism does not significantly contribute to radiation-induced leakage current in typical p-channel MOS transistors. The p-channel leakage current increase is nearly identical for both biased and grounded irradiations and therefore has serious implications for long duration missions since even devices which are usually powered off could show significant degradation and potentially fail.

  5. Estimation of pump operational state with model-based methods

    International Nuclear Information System (INIS)

    Ahonen, Tero; Tamminen, Jussi; Ahola, Jero; Viholainen, Juha; Aranto, Niina; Kestilae, Juha

    2010-01-01

    Pumps are widely used in industry, and they account for 20% of the industrial electricity consumption. Since the speed variation is often the most energy-efficient method to control the head and flow rate of a centrifugal pump, frequency converters are used with induction motor-driven pumps. Although a frequency converter can estimate the operational state of an induction motor without external measurements, the state of a centrifugal pump or other load machine is not typically considered. The pump is, however, usually controlled on the basis of the required flow rate or output pressure. As the pump operational state can be estimated with a general model having adjustable parameters, external flow rate or pressure measurements are not necessary to determine the pump flow rate or output pressure. Hence, external measurements could be replaced with an adjustable model for the pump that uses estimates of the motor operational state. Besides control purposes, modelling the pump operation can provide useful information for energy auditing and optimization purposes. In this paper, two model-based methods for pump operation estimation are presented. Factors affecting the accuracy of the estimation methods are analyzed. The applicability of the methods is verified by laboratory measurements and tests in two pilot installations. Test results indicate that the estimation methods can be applied to the analysis and control of pump operation. The accuracy of the methods is sufficient for auditing purposes, and the methods can inform the user if the pump is driven inefficiently.

  6. The Current Status of the State Financial Audit in Ukraine and Prospects of its Development

    Directory of Open Access Journals (Sweden)

    Dolbneva Deniza V.

    2017-11-01

    Full Text Available The article is aimed at studying the current status and determining the main results of conducting the State financial audit by the State audit service in Ukraine, as well as developing proposals as to ways of its improvement in view of the experience of the world’s leading countries and the requirements of international standards in this sphere of relations. The main indicators and results, which characterize the status of conducting by bodies of the State Audit Service of the State financial audit on key directions, were considered. The obtained data indicate that the State financial audit is taking place in the direction corresponding to international practice. Today, however, because of a number of problems and declarative provisions related to the organization and conduct of the State financial audit, it cannot fully implement all its functional capabilities and tasks. Directions of improvement and transformation of the State financial audit have been proposed. The prospect for further research is development of a holistic mechanism for the functioning of the State financial audit, which will unite all its directions at different levels and its participants.

  7. Existence of non-unique steady state solutions to the RMF current drive equations

    Energy Technology Data Exchange (ETDEWEB)

    Hugrass, W N [Flinders Univ. of South Australia, Bedford Park. School of Physical Sciences

    1985-05-04

    It is shown that the value of the d.c. current driven in a plasma cylinder by means of a rotating magnetic field (RMF) is not unique for R/delta >= 6 and eBsub(..omega..)/..nu..sub(ei)m approx.R/delta, where R is the radius of the plasma cylinder, delta is the classical skin depth, ..nu..sub(ei) is the electron-ion momentum transfer collision frequency, Bsub(..omega..) is the magnitude of the rotating magnetic field, e is the electron charge and m is the electron mass. This effect is predicted using three distinct approaches: (i) a steady state anaysis which ignores the second and higher harmonics of the fields and currents; (ii) a qualitative model which utilizes the analogy between the RMF current drive technique and the operation of the induction motor; (iii) a solution of the initial boundary value equations describing the RMF current drive in cylindrical plasmas.

  8. Complex state variable- and disturbance observer-based current controllers for AC drives

    DEFF Research Database (Denmark)

    Dal, Mehmet; Teodorescu, Remus; Blaabjerg, Frede

    2013-01-01

    In vector-controlled AC drives, the design of current controller is usually based on a machine model defined in synchronous frame coordinate, where the drive performance may be degraded by both the variation of the machine parameters and the cross-coupling between the d- and q-axes components...... of the stator current. In order to improve the current control performance an alternative current control strategy was proposed previously aiming to avoid the undesired cross-coupling and non-linearities between the state variables. These effects are assumed as disturbances arisen in the closed-loop path...... of the parameter and the cross-coupling effect. Moreover, it provides a better performance, smooth and low noisy operation with respect to the complex variable controller....

  9. Novel methods to optimize the effects of transcranial direct current stimulation: a systematic review of transcranial direct current stimulation patents.

    Science.gov (United States)

    Malavera, Alejandra; Vasquez, Alejandra; Fregni, Felipe

    2015-01-01

    Transcranial direct current stimulation (tDCS) is a neuromodulatory technique that has been extensively studied. While there have been initial positive results in some clinical trials, there is still variability in tDCS results. The aim of this article is to review and discuss patents assessing novel methods to optimize the use of tDCS. A systematic review was performed using Google patents database with tDCS as the main technique, with patents filling date between 2010 and 2015. Twenty-two patents met our inclusion criteria. These patents attempt to address current tDCS limitations. Only a few of them have been investigated in clinical trials (i.e., high-definition tDCS), and indeed most of them have not been tested before in human trials. Further clinical testing is required to assess which patents are more likely to optimize the effects of tDCS. We discuss the potential optimization of tDCS based on these patents and the current experience with standard tDCS.

  10. Current state and prospects of carbon management in high latitudes of Northern Eurasia

    Science.gov (United States)

    Schepaschenko, Dmitry; Shvidenko, Anatoly

    2010-05-01

    The current state and trajectories of future development of natural landscapes in high latitudes of Northern Eurasia are defined inter alia by (1) current unsatisfactory social and economic situation in boreal Northern Eurasia; (2) the dramatic magnitude of on-going and expected climatic change (warming up to 10-12oC under global warming at 4oC); (3) increasing anthropogenic pressure, particularly in regions of intensive oil and gas exploration and extraction; (4) large areas of sparsely populated and practically unmanaged land; (5) vulnerability of northern ecosystems which historically developed under cold climates and buffering capacity of which is not well known; (6) risk of catastrophic natural disturbances (fire, insect outbreaks) whose frequency and severity have accelerated during recent decades; and (7) high probability of irreversible changes of vegetation cover. These specifics are overlapped with insufficient governance of natural renewable resources (e.g., forests) and destructed practice of industrial development of new territories (oil and gas extraction and exploration, metallurgy etc.). Based on a full carbon account for terrestrial vegetation ecosystems of Northern Eurasia, we analyze the relative impacts of major drivers on magnitude and uncertainty of the Net Ecosystem Carbon Balance (NECB) under current and expected climate and environment. Dynamic trends and interannual variability of NECB are mostly dependent on weather conditions during growth seasons of individual years, regimes of natural disturbances, and anthropogenic impacts on ecosystems. In a short term, disturbances and human impacts cause a theoretically 'manageable' part of the full carbon account, which on average is estimated to be of about 20% of annual net primary production. In a long term, thawing of permafrost and change of hydrological regimes of vast territories may result in a catastrophic decline of the forested area and wide distribution of 'green desertification'. The

  11. Lower bounds for ballistic current and noise in non-equilibrium quantum steady states

    Directory of Open Access Journals (Sweden)

    Benjamin Doyon

    2015-03-01

    Full Text Available Let an infinite, homogeneous, many-body quantum system be unitarily evolved for a long time from a state where two halves are independently thermalized. One says that a non-equilibrium steady state emerges if there are nonzero steady currents in the central region. In particular, their presence is a signature of ballistic transport. We analyze the consequences of the current observable being a conserved density; near equilibrium this is known to give rise to linear wave propagation and a nonzero Drude peak. Using the Lieb–Robinson bound, we derive, under a certain regularity condition, a lower bound for the non-equilibrium steady-state current determined by equilibrium averages. This shows and quantifies the presence of ballistic transport far from equilibrium. The inequality suggests the definition of “nonlinear sound velocities”, which specialize to the sound velocity near equilibrium in non-integrable models, and “generalized sound velocities”, which encode generalized Gibbs thermalization in integrable models. These are bounded by the Lieb–Robinson velocity. The inequality also gives rise to a bound on the energy current noise in the case of pure energy transport. We show that the inequality is satisfied in many models where exact results are available, and that it is saturated at one-dimensional criticality.

  12. Implications of rf current drive theory for next step steady-state tokamak design

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1985-06-01

    Two missions have been identified for a next-step tokamak experiment in the United States. The more ambitious Mission II device would be a superconducting tokamak, capable of doing long-pulse ignition demonstrations, and hopefully capable of also being able to achieve steady-state burn. A few interesting lines of approach have been identified, using a combination of logical design criteria and parametric system scans [SC85]. These include: (1) TIBER: A point-design suggested by Lawrence Livermore, that proposes a machine with the capability of demonstrating ignition, high beta (10%) and high Q (=10), using high frequency, fast-wave current drive. The TIBER topology uses moderate aspect ratio and high triangularity to achieve high beta. (2) JET Scale-up. (3) Magic5: It is argued here that an aspect ratio of 5 is a magic number for a good steady-state current drive experiment. A moderately-sized machine that achieves ignition and is capable of high Q, using either fast wave or slow wave current drive is described. (4) ET-II: The concept of a highly elongated tokamak (ET) was first proposed as a low-cost approach to Mission I, because of the possibility of achieving ohmic ignition with low-stress copper magnets. We propose that its best application is really for commercial tokamaks, using fast-wave current drive, and suggest a Mission II experiment that would be prototypical of such a reactor

  13. Study of the nonequilibrium state of superconductors by large quasiparticle injection from an external current source

    International Nuclear Information System (INIS)

    Iguchi, I.

    1977-01-01

    We have studied the nonequilibrium state of superconductors by injecting large numbers of quasiparticles from an external current source into a superconducting film of a tunnel junction with low tunnel resistance (typically 0.1--1 Ω for junction area approx. = 10 -4 cm 2 ). It was observed that there was a critical tunnel current density at which a voltage appeared locally in the part of a superconducting film confined to the junction area. Its values ranged from 10 2 to 10 3 A/cm 2 for bath temperatures well below T/sub c/. Followed by this voltage onset, a transition region corresponding to the nonequilibrium intermediate resistive state was also observed. For further increase of the tunnel current, the local film resistance developed beyond the value of its normal resistance, suggesting that the nonequilibrium state extends far beyond the voltage onset point. A theory based on the modified Rothwarf-Taylor equations and Parker's T* model is presented to compare with the experimental results. The calculated critical current density yielded almost the same order of magnitude as those found experimentally. The detailed behavior, however, deviates from the theoretical predictions although the film makes a second-order transition in the broad range of temperatures. It is also shown using four-terminal analysis that our observations and those by Wong, Yeh, and Langenberg are essentially the same

  14. System and method for motor fault detection using stator current noise cancellation

    Science.gov (United States)

    Zhou, Wei; Lu, Bin; Nowak, Michael P.; Dimino, Steven A.

    2010-12-07

    A system and method for detecting incipient mechanical motor faults by way of current noise cancellation is disclosed. The system includes a controller configured to detect indicia of incipient mechanical motor faults. The controller further includes a processor programmed to receive a baseline set of current data from an operating motor and define a noise component in the baseline set of current data. The processor is also programmed to acquire at least on additional set of real-time operating current data from the motor during operation, redefine the noise component present in each additional set of real-time operating current data, and remove the noise component from the operating current data in real-time to isolate any fault components present in the operating current data. The processor is then programmed to generate a fault index for the operating current data based on any isolated fault components.

  15. Alternative (non-animal) methods for cosmetics testing: current status and future prospects-2010.

    Science.gov (United States)

    Adler, Sarah; Basketter, David; Creton, Stuart; Pelkonen, Olavi; van Benthem, Jan; Zuang, Valérie; Andersen, Klaus Ejner; Angers-Loustau, Alexandre; Aptula, Aynur; Bal-Price, Anna; Benfenati, Emilio; Bernauer, Ulrike; Bessems, Jos; Bois, Frederic Y; Boobis, Alan; Brandon, Esther; Bremer, Susanne; Broschard, Thomas; Casati, Silvia; Coecke, Sandra; Corvi, Raffaella; Cronin, Mark; Daston, George; Dekant, Wolfgang; Felter, Susan; Grignard, Elise; Gundert-Remy, Ursula; Heinonen, Tuula; Kimber, Ian; Kleinjans, Jos; Komulainen, Hannu; Kreiling, Reinhard; Kreysa, Joachim; Leite, Sofia Batista; Loizou, George; Maxwell, Gavin; Mazzatorta, Paolo; Munn, Sharon; Pfuhler, Stefan; Phrakonkham, Pascal; Piersma, Aldert; Poth, Albrecht; Prieto, Pilar; Repetto, Guillermo; Rogiers, Vera; Schoeters, Greet; Schwarz, Michael; Serafimova, Rositsa; Tähti, Hanna; Testai, Emanuela; van Delft, Joost; van Loveren, Henk; Vinken, Mathieu; Worth, Andrew; Zaldivar, José-Manuel

    2011-05-01

    The 7th amendment to the EU Cosmetics Directive prohibits to put animal-tested cosmetics on the market in Europe after 2013. In that context, the European Commission invited stakeholder bodies (industry, non-governmental organisations, EU Member States, and the Commission's Scientific Committee on Consumer Safety) to identify scientific experts in five toxicological areas, i.e. toxicokinetics, repeated dose toxicity, carcinogenicity, skin sensitisation, and reproductive toxicity for which the Directive foresees that the 2013 deadline could be further extended in case alternative and validated methods would not be available in time. The selected experts were asked to analyse the status and prospects of alternative methods and to provide a scientifically sound estimate of the time necessary to achieve full replacement of animal testing. In summary, the experts confirmed that it will take at least another 7-9 years for the replacement of the current in vivo animal tests used for the safety assessment of cosmetic ingredients for skin sensitisation. However, the experts were also of the opinion that alternative methods may be able to give hazard information, i.e. to differentiate between sensitisers and non-sensitisers, ahead of 2017. This would, however, not provide the complete picture of what is a safe exposure because the relative potency of a sensitiser would not be known. For toxicokinetics, the timeframe was 5-7 years to develop the models still lacking to predict lung absorption and renal/biliary excretion, and even longer to integrate the methods to fully replace the animal toxicokinetic models. For the systemic toxicological endpoints of repeated dose toxicity, carcinogenicity and reproductive toxicity, the time horizon for full replacement could not be estimated.

  16. Classification of methods for measuring current-voltage characteristics of semiconductor devices

    Directory of Open Access Journals (Sweden)

    Iermolenko Ia. O.

    2014-06-01

    Full Text Available It is shown that computer systems for measuring current-voltage characteristics are very important for semiconductor devices production. The main criteria of efficiency of such systems are defined. It is shown that efficiency of such systems significantly depends on the methods for measuring current-voltage characteristics of semiconductor devices. The aim of this work is to analyze existing methods for measuring current-voltage characteristics of semiconductor devices and to create the classification of these methods in order to specify the most effective solutions in terms of defined criteria. To achieve this aim, the most common classifications of methods for measuring current-voltage characteristics of semiconductor devices and their main disadvantages are considered. Automated and manual, continuous, pulse, mixed, isothermal and isodynamic methods for measuring current-voltage characteristics are analyzed. As a result of the analysis and generalization of existing methods the next classification criteria are defined: the level of automation, the form of measurement signals, the condition of semiconductor device during the measurements, and the use of mathematical processing of the measurement results. With the use of these criteria the classification scheme of methods for measuring current-voltage characteristics of semiconductor devices is composed and the most effective methods are specified.

  17. Linear-scaling quantum mechanical methods for excited states.

    Science.gov (United States)

    Yam, ChiYung; Zhang, Qing; Wang, Fan; Chen, GuanHua

    2012-05-21

    The poor scaling of many existing quantum mechanical methods with respect to the system size hinders their applications to large systems. In this tutorial review, we focus on latest research on linear-scaling or O(N) quantum mechanical methods for excited states. Based on the locality of quantum mechanical systems, O(N) quantum mechanical methods for excited states are comprised of two categories, the time-domain and frequency-domain methods. The former solves the dynamics of the electronic systems in real time while the latter involves direct evaluation of electronic response in the frequency-domain. The localized density matrix (LDM) method is the first and most mature linear-scaling quantum mechanical method for excited states. It has been implemented in time- and frequency-domains. The O(N) time-domain methods also include the approach that solves the time-dependent Kohn-Sham (TDKS) equation using the non-orthogonal localized molecular orbitals (NOLMOs). Besides the frequency-domain LDM method, other O(N) frequency-domain methods have been proposed and implemented at the first-principles level. Except one-dimensional or quasi-one-dimensional systems, the O(N) frequency-domain methods are often not applicable to resonant responses because of the convergence problem. For linear response, the most efficient O(N) first-principles method is found to be the LDM method with Chebyshev expansion for time integration. For off-resonant response (including nonlinear properties) at a specific frequency, the frequency-domain methods with iterative solvers are quite efficient and thus practical. For nonlinear response, both on-resonance and off-resonance, the time-domain methods can be used, however, as the time-domain first-principles methods are quite expensive, time-domain O(N) semi-empirical methods are often the practical choice. Compared to the O(N) frequency-domain methods, the O(N) time-domain methods for excited states are much more mature and numerically stable, and

  18. An assessment of current methods for stabilising steep cut slopes by ...

    African Journals Online (AJOL)

    This paper examines the various current methods that are being used throughout South Africa and assesses the merits of such methods. Furthermore, factors that have an overriding influence on the success of a particular method in a certain set of circumstances are analysed. Cost comparisons are produced to assist in ...

  19. [POSTRESUSCITATION CICATRICIAL TRACHEAL STENOSIS. CURRENT STATE OF THE PROBLEM - THE SUCCESSES, THE HOPES AND DISAPPOINTMENTS.

    Science.gov (United States)

    Parshin, V D; Vyzhigina, M A; Rusakov, M A; Parshin, V V; Titov, V A; Starostin, A V

    2016-09-01

    Currently, the trend continues to increase the number ofpatients with cicatricial tracheal stenosis (CTS). Therefore, prevention and treatment ofthis disease remains topical. The main cause ofcicatricial tracheal stenosis is damaging the trachea during mechanical ventilation. The scheme ofprevention of this disease in Russia hasn't brought the desired results. to clarify the modern etiology of cicatricial tracheal stenosis, to identify the trend in incidence rates, to determine whether there is an optimal safe alternative to tracheostomy including the use of minimally invasive techniques, to improve diagnostic and therapeutic algorithm at various stages of assistance, and also to study the results of innovative operations and new ways of maintaining gas exchange. 1128 patients with cicatricial tracheal stenosis was treated from 1963 to 2015 in Petrovsky National Research Centre of Surgery and IMSechenov First Moscow State Medical University. Over time methods of di- agnosis, methods of anesthesia and operations have been varied. In this regard all patients were divided into two groups depending on the period of time from 1963 to 2000 (297 patients) andfrom 2001 to 2015 (831 patients). In recent decades there is a steady increase in the number of treated patients. So, if in the first group during the year operational treatment about the CTS 8,0 patients were underwent, in the second - to 55.4. Cicatricial tracheal stenosis appeared after lung mechanical ventilation at 1025 (for 90.9%) patients. They have undergone both radical one-stage treatment and multi-stage and sequential intraluminal procedures. In general there is a clear trend towards more aggressive surgical tactics. So, if in thefirst group, the tracheal resection with anastomosis was performedin 59 patients only, the second-330. Thefrequency ofpostoperative complications and mortality in the second group ofpatients was 12.9 and 0.7 %, respectively. Only a reasonable combination of all treatment methods

  20. Representing delayed force feedback as a combination of current and delayed states.

    Science.gov (United States)

    Avraham, Guy; Mawase, Firas; Karniel, Amir; Shmuelof, Lior; Donchin, Opher; Mussa-Ivaldi, Ferdinando A; Nisky, Ilana

    2017-10-01

    To adapt to deterministic force perturbations that depend on the current state of the hand, internal representations are formed to capture the relationships between forces experienced and motion. However, information from multiple modalities travels at different rates, resulting in intermodal delays that require compensation for these internal representations to develop. To understand how these delays are represented by the brain, we presented participants with delayed velocity-dependent force fields, i.e., forces that depend on hand velocity either 70 or 100 ms beforehand. We probed the internal representation of these delayed forces by examining the forces the participants applied to cope with the perturbations. The findings showed that for both delayed forces, the best model of internal representation consisted of a delayed velocity and current position and velocity. We show that participants relied initially on the current state, but with adaptation, the contribution of the delayed representation to adaptation increased. After adaptation, when the participants were asked to make movements with a higher velocity for which they had not previously experienced with the delayed force field, they applied forces that were consistent with current position and velocity as well as delayed velocity representations. This suggests that the sensorimotor system represents delayed force feedback using current and delayed state information and that it uses this representation when generalizing to faster movements. NEW & NOTEWORTHY The brain compensates for forces in the body and the environment to control movements, but it is unclear how it does so given the inherent delays in information transmission and processing. We examined how participants cope with delayed forces that depend on their arm velocity 70 or 100 ms beforehand. After adaptation, participants applied opposing forces that revealed a partially correct representation of the perturbation using the current and the

  1. External heating and current drive source requirements towards steady-state operation in ITER

    Science.gov (United States)

    Poli, F. M.; Kessel, C. E.; Bonoli, P. T.; Batchelor, D. B.; Harvey, R. W.; Snyder, P. B.

    2014-07-01

    Steady state scenarios envisaged for ITER aim at optimizing the bootstrap current, while maintaining sufficient confinement and stability to provide the necessary fusion yield. Non-inductive scenarios will need to operate with internal transport barriers (ITBs) in order to reach adequate fusion gain at typical currents of 9 MA. However, the large pressure gradients associated with ITBs in regions of weak or negative magnetic shear can be conducive to ideal MHD instabilities, reducing the no-wall limit. The E × B flow shear from toroidal plasma rotation is expected to be low in ITER, with a major role in the ITB dynamics being played by magnetic geometry. Combinations of heating and current drive (H/CD) sources that sustain reversed magnetic shear profiles throughout the discharge are the focus of this work. Time-dependent transport simulations indicate that a combination of electron cyclotron (EC) and lower hybrid (LH) waves is a promising route towards steady state operation in ITER. The LH forms and sustains expanded barriers and the EC deposition at mid-radius freezes the bootstrap current profile stabilizing the barrier and leading to confinement levels 50% higher than typical H-mode energy confinement times. Using LH spectra with spectrum centred on parallel refractive index of 1.75-1.85, the performance of these plasma scenarios is close to the ITER target of 9 MA non-inductive current, global confinement gain H98 = 1.6 and fusion gain Q = 5.

  2. Steady-state configurations of Dzyaloshinskii domain walls driven by field and current

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez-Tejerina, L., E-mail: luis.st@ee.uva.es [Departamento de Electricidad y Electrónica, Facultad de Ciencias, Universidad de Valladolid, 47011 Valladolid (Spain); Departamento de Física Aplicada, Facultad de Ciencias, Universidad de Salamanca, 37011 Salamanca (Spain); Alejos, O. [Departamento de Electricidad y Electrónica, Facultad de Ciencias, Universidad de Valladolid, 47011 Valladolid (Spain); Martínez, E. [Departamento de Física Aplicada, Facultad de Ciencias, Universidad de Salamanca, 37011 Salamanca (Spain)

    2017-02-01

    The dynamics of Dzyaloshinskii domain walls (DDW) in ultrathin ferromagnetic strips with perpendicular magnetic anisotropy, for different values of both perpendicular field and longitudinal current excitation associated to the Spin-Hall effect, has been studied, taking into account different values of the interfacial Dzyaloshinskii-Moriya interaction (DMI). This study has been carried out with the help of the q-Φ one-dimensional model and micromagnetic simulations. We have found that Walker breakdown may be avoided by applying a certain threshold current, even though the inverse effect is also possible. We have also found that, for particular values of field and current, the magnetization within the DDW experiences an abrupt change of orientation, which provokes a change on the contribution of current to the terminal DDW velocity. This effect disappears for sufficiently strong DMI, as it is expected from the model. - Highlights: • Steady-state configurations of Dzyaloshinskii domain walls driven by field and current have been reported. • Field-like torques and Slonczewskii-like torques due to spin-orbit interactions have been considered. • The response is associated with the rotation of the domain wall inner magnetization. • An asymmetric behavior arising from the existence of degenerate states is shown. • The asymmetry results in different travelled distances and/or terminal speeds.

  3. Steady-state configurations of Dzyaloshinskii domain walls driven by field and current

    International Nuclear Information System (INIS)

    Sánchez-Tejerina, L.; Alejos, O.; Martínez, E.

    2017-01-01

    The dynamics of Dzyaloshinskii domain walls (DDW) in ultrathin ferromagnetic strips with perpendicular magnetic anisotropy, for different values of both perpendicular field and longitudinal current excitation associated to the Spin-Hall effect, has been studied, taking into account different values of the interfacial Dzyaloshinskii-Moriya interaction (DMI). This study has been carried out with the help of the q-Φ one-dimensional model and micromagnetic simulations. We have found that Walker breakdown may be avoided by applying a certain threshold current, even though the inverse effect is also possible. We have also found that, for particular values of field and current, the magnetization within the DDW experiences an abrupt change of orientation, which provokes a change on the contribution of current to the terminal DDW velocity. This effect disappears for sufficiently strong DMI, as it is expected from the model. - Highlights: • Steady-state configurations of Dzyaloshinskii domain walls driven by field and current have been reported. • Field-like torques and Slonczewskii-like torques due to spin-orbit interactions have been considered. • The response is associated with the rotation of the domain wall inner magnetization. • An asymmetric behavior arising from the existence of degenerate states is shown. • The asymmetry results in different travelled distances and/or terminal speeds.

  4. The construction of optimal stated choice experiments theory and methods

    CERN Document Server

    Street, Deborah J

    2007-01-01

    The most comprehensive and applied discussion of stated choice experiment constructions available The Construction of Optimal Stated Choice Experiments provides an accessible introduction to the construction methods needed to create the best possible designs for use in modeling decision-making. Many aspects of the design of a generic stated choice experiment are independent of its area of application, and until now there has been no single book describing these constructions. This book begins with a brief description of the various areas where stated choice experiments are applicable, including marketing and health economics, transportation, environmental resource economics, and public welfare analysis. The authors focus on recent research results on the construction of optimal and near-optimal choice experiments and conclude with guidelines and insight on how to properly implement these results. Features of the book include: Construction of generic stated choice experiments for the estimation of main effects...

  5. A method for prompt calculation of neutron flux from measured SPND [self-powered neutron detectors] currents

    International Nuclear Information System (INIS)

    Kulacsy, K.; Lux, I.

    1997-01-01

    A new, approximate method is given to calculate the in-core flux from the current of SPNDs, with a delay of only a few seconds. The stability of this stepwise algorithm is proven to be satisfactory, and the results of tests performed both on synthetic and on real data are presented. The reconstructed flux is found to follow both steady state and transient fluxes well. (author)

  6. An evaluation of the methods of determining excited state population distributions from sputtering sources

    International Nuclear Information System (INIS)

    Snowdon, K.J.; Andresen, B.; Veje, E.

    1978-01-01

    The method of calculating relative initial level populations of excited states of sputtered atoms is developed in principle and compared with those in current use. The reason that the latter, although mathematically different, have generally led to similar population distributions is outlined. (Auth.)

  7. Solid state nuclear track detection principles, methods and applications

    CERN Document Server

    Durrani, S A; ter Haar, D

    1987-01-01

    Solid State Nuclear Track Detection: Principles, Methods and Applications is the second book written by the authors after Nuclear Tracks in Solids: Principles and Applications. The book is meant as an introduction to the subject solid state of nuclear track detection. The text covers the interactions of charged particles with matter; the nature of the charged-particle track; the methodology and geometry of track etching; thermal fading of latent damage trails on tracks; the use of dielectric track recorders in particle identification; radiation dossimetry; and solid state nuclear track detecti

  8. Current state of methodological and decisions for radiation treatment of blood, its components and products

    Directory of Open Access Journals (Sweden)

    Gordeev A.V.

    2014-12-01

    Full Text Available This article presents currently used blood transfusion media — components and blood products, therapeutic effects, reactions and complications of blood transfusion, use of radiation treatment for blood transfusion fluids. There had been discussed in detail the practice of radiation processing of blood components and for the prevention of reaction "graft versus host" and studies of plasma radiation treatment for its infectious safety. There was presented the current state of techniques and technical solutions of radiation treatment of transfusion-transmissible environments. There were also considered an alternative to radiation treatment of blood.

  9. A simulation study on burning profile tailoring of steady state, high bootstrap current tokamaks

    International Nuclear Information System (INIS)

    Nakamura, Y.; Takei, N.; Tobita, K.; Sakamoto, Y.; Fujita, T.; Fukuyama, A.; Jardin, S.C.

    2007-01-01

    From the aspect of fusion burn control in steady state DEMO plant, the significant challenges are to maintain its high power burning state of ∝3-5 GW without burning instability, hitherto well-known as ''thermal stability'', and also to keep its desired burning profile relevant with internal transport barrier (ITB) that generates high bootstrap current. The paper presents a simulation modeling of the burning stability coupled with the self-ignited fusion burn and the structure-formation of the ITB. A self-consistent simulation, including a model for improved core energy confinement, has pointed out that in the high power fusion DEMO plant there is a close, nonlinear interplay between the fusion burnup and the current source of non-inductive, ITB-generated bootstrap current. Consequently, as much distinct from usual plasma controls under simulated burning conditions with lower power (<<1 GW), the selfignited fusion burn at a high power burning state of ∝3-5 GW becomes so strongly selforganized that any of external means except fuelling can not provide the effective control of the stable fusion burn.It is also demonstrated that externally applied, inductive current perturbations can be used to control both the location and strength of ITB in a fully noninductive tokamak discharge. We find that ITB structures formed with broad noninductive current sources such as LHCD are more readily controlled than those formed by localized sources such as ECCD. The physics of the inductive current is well known. Consequently, we believe that the controllability of the ITB is generic, and does not depend on the details of the transport model (as long as they can form an ITB for sufficiently reversed magnetic shear q-profile). Through this external control of the magnetic shear profile, we can maintain the ITB strength that is otherwise prone to deteriorate when the bootstrap current increases. These distinguishing capabilities of inductive current perturbation provide steady

  10. Current Perspectives on Viable but Non-culturable State in Foodborne Pathogens.

    Science.gov (United States)

    Zhao, Xihong; Zhong, Junliang; Wei, Caijiao; Lin, Chii-Wann; Ding, Tian

    2017-01-01

    The viable but non-culturable (VBNC) state, a unique state in which a number of bacteria respond to adverse circumstances, was first discovered in 1982. Unfortunately, it has been reported that many foodborne pathogens can be induced to enter the VBNC state by the limiting environmental conditions during food processing and preservation, such as extreme temperatures, drying, irradiation, pulsed electric field, and high pressure stress, as well as the addition of preservatives and disinfectants. After entering the VBNC state, foodborne pathogens will introduce a serious crisis to food safety and public health because they cannot be detected using conventional plate counting techniques. This review provides an overview of the various features of the VBNC state, including the biological characteristics, induction and resuscitation factors, formation and resuscitation mechanisms, detection methods, and relationship to food safety.

  11. CURRENT STATE AND DEVELOPMENT OF THE FISHERIES SECTOR OF UKRAINE IN THE CRISIS

    Directory of Open Access Journals (Sweden)

    І. Hrytsyniak

    2015-03-01

    Full Text Available Purpose. Fisheries has a strategic importance for supplying the population with food, while the sectors of the national economy with raw materials, for strengthening the country’s position in the international arena, for preserving spatial and national integrity of Ukraine, plays an important role in the restoration of natural resources and in the increase in employment. In recent years, fisheries sector of Ukraine is in a severe, protracted economic crisis. Considering its socio-economic and strategic importance for the state, there is a task for developing an effective policy for fisheries development in Ukraine that defines the relevance of the research and practical importance of its results. Thus, a compilation and analysis of the existing information on the current state and development of fisheries sector in the crisis period will allow a deeper understanding of problems in the fisheries sector in Ukraine and finding quick solutions. The main goal of the state policy in the field of fisheries in Ukraine has to be meeting the needs of the population in fish and fish products by creating conditions for effective operations and development of aquaculture and fishing enterprises. Findings. The article reviews the current state of the development of fisheries sector in Ukraine, consumption, catch, processing of fish and seafood, dynamics of fish product exports and imports, legislative and regulatory framework of fisheries sector, state of the implementation of WTO and EU requirements, as well as finding ways for the fisheries sector out from the crisis. Originality. This work is a compilation of the information on the current state of fisheries sector development in Ukraine. The information is provided in the form of a coherent presentation of information on the current state of fisheries sector in Ukraine, both in the domestic and foreign markets. Practical Value. The fact that the fisheries sector of Ukraine is still in a depressive state

  12. CURRENT STATE OF WATER BIORESOURCES OF THE VOLGA AND CASPIAN SEA BASIN

    Directory of Open Access Journals (Sweden)

    L. M. Vasileva

    2012-01-01

    Full Text Available The article considers the issues of current degraded state of aquatic biological resources of the Volga-Caspian Sea basin and provides specific data on commercial stocks of fish. The main reasons for decrease in natural stocks of ichthyofauna are regulation and pollution of the spawning rivers, adverse hydrological conditions, injudicious hunting, poaching pressure. To improve the state of natural stocks of fish it is necessary to increase their reproduction and implement measures to restore and rational exploitation of aquatic bioresources of the Volga- Caspian Sea basin.

  13. Technique of Critical Current Density Measurement of Bulk Superconductor with Linear Extrapolation Method

    International Nuclear Information System (INIS)

    Adi, Wisnu Ari; Sukirman, Engkir; Winatapura, Didin S.

    2000-01-01

    Technique of critical current density measurement (Jc) of HTc bulk ceramic superconductor has been performed by using linear extrapolation with four-point probes method. The measurement of critical current density HTc bulk ceramic superconductor usually causes damage in contact resistance. In order to decrease this damage factor, we introduce extrapolation method. The extrapolating data show that the critical current density Jc for YBCO (123) and BSCCO (2212) at 77 K are 10,85(6) Amp.cm - 2 and 14,46(6) Amp.cm - 2, respectively. This technique is easier, simpler, and the use of the current flow is low, so it will not damage the contact resistance of the sample. We expect that the method can give a better solution for bulk superconductor application. Key words. : superconductor, critical temperature, and critical current density

  14. An application of the eddy-current method for inspections of austenitic cladding

    International Nuclear Information System (INIS)

    Kubis, S.; Herka, M.; Krajcovic, R.

    1999-01-01

    The application of the eddy-current method for inspections of austenitic cladding by means of pancake probes. Phase and amplitude characteristics of artificial defects and anticipated interference signals. Optimization of inspection parameters

  15. Current state of Czech astronomy popularization and its potential for enhancing science career interest

    Science.gov (United States)

    Kříček, Radek

    2015-08-01

    The Czech Republic has a dense net of observatories, astronomical clubs and other activities for both adults and children. Can we use it to improve skills of our pupils and their motivation to choose their career in science? Does the situation in the Czech Republic differ from abroad? What can we improve in the future? These questions were not answered satisfactorily so far. We decided to contribute to solve this issue.We present our survey of current state based mainly on electronic sources and personal dealings. Besides of 56 observatories working with public and many interest clubs, there are other possibilities to meet astronomy. For example, Astronomical Olympiad attracts thousands of pupils across the country each year to solve both theoretical and practical tasks in astronomy. In other projects, children can visit Dark-Sky Parks, design experiments for a stratospheric balloon, observe with CCD or radio devices or build their own rockets.We outline our ongoing project to examine the link between popularization activities and pupils’ or high school students’ attitude toward science and science career. We plan to create a typology of both popularization activities and life stories of people dealing with astronomy. From the methodological point of view, the mixed method design, combining both the qualitative and quantitative approach, will be used to solve the research problems. The basic research plan will be a case study. So far the project is based on interviews with various subjects. We choose people with different life stories, all connected with astronomy or astronomy popularization in some period. We focus on important moments in their career, similarities between subjects, and various types of possible motivation to participate in astronomy-related activities or to study science at university.Future results can be used to help interested organizations such as universities, observatories or astronomical societies. They will be able to work more

  16. MRI for solitary pulmonary nodule and mass assessment: Current state of the art.

    Science.gov (United States)

    Ohno, Yoshiharu; Kauczor, Hans-Ulrich; Hatabu, Hiroto; Seo, Joon Beom; van Beek, Edwin J R

    2018-03-23

    Since the clinical introduction of magnetic resonance imaging (MRI), the chest has been one of its most challenging applications, and many physicists and radiologists have tried since the 1980s to use MR for assessment of different lung diseases as well as mediastinal and pleural diseases. Since then, however, technical advances in sequencing, scanners, and coils, adaptation of parallel imaging techniques, utilization of contrast media, and development of postprocessing tools have been reported by many basic and clinical researchers. As a result, state-of-the-art thoracic MRI is now substituted for traditional imaging techniques and/or plays a complementary role in the management of patients with various chest diseases, and especially in the detection of pulmonary nodules and in thoracic oncology. In addition, MRI has continued to be developed to help overcome the limitations of computed tomography (CT) and nuclear medicine examinations. It can currently provide not only morphological, but also functional, physiological, pathophysiological, and molecular information at 1.5T with a gradual shift from 1.5T to 3T MR systems. In this review, we focus on these recent advances in MRI for pulmonary nodule detection and pulmonary nodule and mass evaluation by using noncontrast-enhanced and contrast-enhanced techniques as well as new molecular imaging methods such as chemical exchange saturation transfer imaging for a comparison with other modalities such as single or multidetector row CT, 18F-fluoro-2-deoxyglucose positron emission tomography (FDG-PET), and/or PET/CT. 4 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018. © 2018 International Society for Magnetic Resonance in Medicine.

  17. Minimal invasive single-site surgery in colorectal procedures: Current state of the art

    Directory of Open Access Journals (Sweden)

    Diana Michele

    2011-01-01

    Full Text Available Background: Minimally invasive single-site (MISS surgery has recently been applied to colorectal surgery. We aimed to assess the current state of the art and the adequacy of preliminary oncological results. Methods: We performed a systematic review of the literature using Pubmed, Medline, SCOPUS and Web of Science databases. Keywords used were "Single Port" or "Single-Incision" or "LaparoEndoscopic Single Site" or "SILS™" and "Colon" or "Colorectal" and "Surgery". Results: Twenty-nine articles on colorectal MISS surgery have been published from July 2008 to July 2010, presenting data on 149 patients. One study reported analgesic requirement. The final incision length ranged from 2.5 to 8 cm. Only two studies reported fascial incision length. There were two port site hernias in a series of 13 patients (15.38%. Two "fully laparoscopic" MISS procedures with preparation and achievement of the anastomosis completely intracorporeally are reported. Future site of ileostomy was used as the sole access for the procedures in three studies. Lymph node harvesting, resection margins and length of specimen were sufficient in oncological cases. Conclusions: MISS colorectal surgery is a challenging procedure that seems to be safe and feasible, but the existing clinical evidence is limited. In selected cases, and especially when an ileostomy is planned, colorectal surgery may be an ideal indication for MISS surgery leading to a no-scar surgery. Despite preliminary oncological results showing the feasibility of MISS surgery, we want to stress the need to standardize the technique and carefully evaluate its application in oncosurgery under ethical committee control.

  18. A survey of current clinical practice of permanent prostate brachytherapy in the United States

    International Nuclear Information System (INIS)

    Prestidge, Bradley R.; Prete, James J.; Buchholz, Thomas A.; Friedland, Jay L.; Stock, Richard G.; Grimm, Peter D.; Bice, William S.

    1998-01-01

    Purpose: To help establish standards of care for transperineal interstitial permanent prostate brachytherapy (TIPPB) by obtaining data regarding current clinical practice among the most experienced TIPPB brachytherapists in the United States. Methods and Materials: The 70 brachytherapists who performed the greatest number of TIPPB cases in 1995 in the U.S. were surveyed. Each received a comprehensive four page questionnaire that included sections on training and experience, patient and isotope selection criteria, manpower, technique, and follow-up. Thirty-five (50%) surveys were ultimately returned after three mailings and follow-up phone calls. The cumulative experience of the 35 respondents represented approximately 45% of the total TIPPB volume in the U.S. for 1995. Respondents included 29 from the private sector and six from academic programs. Results: The median physician experience with TIPPB was reported as 4.9 years. Each performed an average of 73 TIPPB procedures in 1995 (range 40-300). This represented an increase in volume for most (74%) of the respondents. Sixty-three percent of the respondents attended a formal training course, 54% had TIPPB-specific residency training, and 31% had been proctored (16 had received two or more types of training experience). The most commonly reported selection criteria for implant alone was on Gleason score ≤7, PSA 125 I prescribed to 120 Gy (75%) or 103 Pd to 90 Gy (50%). Sixty percent reported using a Mick applicator, 46% prefer using preloaded needles, and (11%) use both techniques. Real-time imaging was usually performed with ultrasound (94%); most included fluoroscopy (60%). Definitions of PSA control varied widely. Conclusions: TIPPB clinical practice in the U.S. demonstrates similarities in technique, but differences in patient selection and definitions of biochemical control. It is, therefore, incumbent on those beginning TIPPB programs to carefully review the specific practice details of those institutions

  19. Cross-Circulating Current Suppression Method for Parallel Three-Phase Two-Level Inverters

    DEFF Research Database (Denmark)

    Wei, Baoze; Guerrero, Josep M.; Guo, Xiaoqiang

    2015-01-01

    The parallel architecture is very popular for power inverters to increase the power level. This paper presents a method for the parallel operation of inverters in an ac-distributed system, to suppress the cross-circulating current based on virtual impedance without current-sharing bus...

  20. DETERMINATION OF HYDRAULIC TURBINE EFFICIENCY BY MEANS OF THE CURRENT METER METHOD

    Directory of Open Access Journals (Sweden)

    PURECE C.

    2016-12-01

    Full Text Available The paper presents methodology used for determining the efficiency of a low head Kaplan hydraulic turbine with short converging intake. The measurement method used was the current meters method, the only measurement method recommended by the IEC 41standard for flow measurement in this case. The paper also presents the methodology used for measuring the flow by means of the current meters method and the various procedures for calculating the flow. In the last part the paper presents the flow measurements carried out on the Fughiu HPP hydraulic turbines for determining the actual operating efficiency.

  1. Localized excitations in nonlinear complex systems current state of the art and future perspectives

    CERN Document Server

    Cuevas-Maraver, Jesús; Frantzeskakis, Dimitri; Karachalios, Nikos; Kevrekidis, Panayotis; Palmero-Acebedo, Faustino

    2014-01-01

    The study of nonlinear localized excitations is a long-standing challenge for research in basic and applied science, as well as engineering, due to their importance in understanding and predicting phenomena arising in nonlinear and complex systems, but also due to their potential for the development and design of novel applications. This volume is a compilation of chapters representing the current state-of-the-art on the field of localized excitations and their role in the dynamics of complex physical systems.

  2. Investigation of current redistribution in superstabilized superconducting winding when switching to the normal resistive state

    International Nuclear Information System (INIS)

    Devred, A.

    1989-01-01

    We have investigated the electromagnetic behavior of a layer of superstabilized superconductive composite conductors when switching instantaneously and uniformly to the normal resistive state. The Laplace transform was used to solve the current diffusion equation in the superstabilizing material. The value of power dissipated per unit volume, averaged over the layer thickness, was then computed using the ''pseudo''-convolution theorem in the complex plane. Last, we present a simple interpretation of the phenomenon with the help of two time constants

  3. THE CURRENT STATE OF LEGAL INSTITUTIONS PROTECTING THE RIGHTS OF JUVENILES IN RUSSIA

    OpenAIRE

    Yulia Hafizovna DAVYDOVA

    2015-01-01

    The article highlights the current state of the legislation on protection of the rights of under-aged. Much attention is paid to the formation of the juvenile justice system in the Russian Federation. We present problems related to law infringements by teenagers in various fields and their solutions, highlight the work and the development of juvenile courts in Russia, sum up the results of the implementation of juvenile technologies and their significance, gives the definition of the term «co...

  4. Current state and controversies in fertility preservation in women with breast cancer

    OpenAIRE

    Taylan, Enes; Oktay, Kutluk H

    2017-01-01

    On average, over 25000 women are diagnosed with breast cancer under the age of 45 annually in the United States. Because an increasing number of young women delay childbearing to later life for various reasons, a growing population of women experience breast cancer before completing childbearing. In this context, preservation of fertility potential of breast cancer survivors has become an essential concept in modern cancer care. In this review, we will outline the currently available fertilit...

  5. State of Corporate Social Responsibility in India – Current scenario, Approach and Drivers

    OpenAIRE

    Nagpal, Kshitij

    2016-01-01

    Purpose – The aim of the study is to examine the state of Corporate Social Responsibility (CSR)in India. The report attempts to investigate the current scenario of CSR ctivities and examine how corporations in India interpret CSR. The study also seeks to identify the reported driving forces behind implementation of CSR practices by firms in India. Methodology – CSR personnel from 3O companies that are obligated to spend on CSR activities under the Companies Act, 2013 were surveyed. To cr...

  6. System and method for bearing fault detection using stator current noise cancellation

    Science.gov (United States)

    Zhou, Wei; Lu, Bin; Habetler, Thomas G.; Harley, Ronald G.; Theisen, Peter J.

    2010-08-17

    A system and method for detecting incipient mechanical motor faults by way of current noise cancellation is disclosed. The system includes a controller configured to detect indicia of incipient mechanical motor faults. The controller further includes a processor programmed to receive a baseline set of current data from an operating motor and define a noise component in the baseline set of current data. The processor is also programmed to repeatedly receive real-time operating current data from the operating motor and remove the noise component from the operating current data in real-time to isolate any fault components present in the operating current data. The processor is then programmed to generate a fault index for the operating current data based on any isolated fault components.

  7. Guessing lexicon entries using finite-state methods

    OpenAIRE

    Koskenniemi, Kimmo Matti

    2018-01-01

    A practical method for interactive guessing of LEXC lexicon entries is presented. The method is based on describing groups of similarly inflected words using regular expressions. The patterns are compiled into a finite-state transducer (FST) which maps any word form into the possible LEXC lexicon entries which could generate it. The same FST can be used (1) for converting conventional headword lists into LEXC entries, (2) for interactive guessing of entries, (3) for corpus-assisted interactiv...

  8. Current and potential sustainable corn stover feedstock for biofuel production in the United States

    Science.gov (United States)

    Tan, Zhengxi; Liu, Shu-Guang; Tieszen, Larry L.; Bliss, Norman

    2012-01-01

    Increased demand for corn (Zea mays L.) stover as a feedstock for cellulosic ethanol raises concerns about agricultural sustainability. Excessive corn stover harvesting could have long-term impacts on soil quality. We estimated current and future stover production and evaluated the potential harvestable stover amount (HSA) that could be used for biofuel feedstock in the United States by defining the minimum stover requirement (MSR) associated with the current soil organic carbon (SOC) content, tillage practices, and crop rotation systems. Here we show that the magnitude of the current HSA is limited (31 Tg y−1, dry matter) due to the high MSR for maintaining the current SOC content levels of soils that have a high carbon content. An alternative definition of MSR for soils with a moderate level of SOC content could significantly elevate the annual HSA to 68.7 Tg, or even to 132.2 Tg if the amount of currently applied manure is counted to partially offset the MSR. In the future, a greater potential for stover feedstock could come from an increase in stover yield, areal harvest index, and/or the total planted area. These results suggest that further field experiments on MSR should be designed to identify differences in MSR magnitude between maintaining SOC content and preventing soil erosion, and to understand the role of current SOC content level in determining MSR from soils with a wide range of carbon contents and climatic conditions.

  9. Thermal studies of a superconducting current limiter using Monte-Carlo method

    Science.gov (United States)

    Lévêque, J.; Rezzoug, A.

    1999-07-01

    Considering the increase of the fault current level in electrical network, the current limiters become very interesting. The superconducting limiters are based on the quasi-instantaneous intrinsic transition from superconducting state to normal resistive one. Without detection of default or given order, they reduce the constraints supported by electrical installations above the fault. To avoid the destruction of the superconducting coil, the temperature must not exceed a certain value. Therefore the design of a superconducting coil needs the simultaneous resolution of an electrical equation and a thermal one. This papers deals with a resolution of this coupled problem by the method of Monte-Carlo. This method allows us to calculate the evolution of the resistance of the coil as well as the current of limitation. Experimental results are compared with theoretical ones. L'augmentation des courants de défaut dans les grands réseaux électriques ravive l'intérêt pour les limiteurs de courant. Les limiteurs supraconducteurs de courants peuvent limiter quasi-instantanément, sans donneur d'ordre ni détection de défaut, les courants de court-circuit réduisant ainsi les contraintes supportées par les installations électriques situées en amont du défaut. La limitation s'accompagne nécessairement de la transition du supraconducteur par dépassement de son courant critique. Pour éviter la destruction de la bobine supraconductrice la température ne doit pas excéder une certaine valeur. La conception d'une bobine supraconductrice exige donc la résolution simultanée d'une équation électrique et d'une équation thermique. Nous présentons une résolution de ce problème electrothermique par la méthode de Monte-Carlo. Cette méthode nous permet de calculer l'évolution de la résistance de la bobine et du courant de limitation. Des résultats expérimentaux sont comparés avec les résultats théoriques.

  10. Mixed states in bipolar disorder - changes in DSM-5 and current treatment recommendations.

    Science.gov (United States)

    Betzler, Felix; Stöver, Laura Apollonia; Sterzer, Philipp; Köhler, Stephan

    2017-11-01

    Mixed states in affective disorders represent a particular challenge in clinical routine, characterized by a complicated course of treatment and a worse treatment response. Clinical features of mixed states and the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) criteria are presented and critical discussed. We then performed a systematic review using the terms 'bipolar', 'mixed' and 'randomized' to evaluate current treatment options. For pharmacological treatment of mixed states in total, there is still insufficient data from RCTs. However, there is some evidence for efficacy in mixed states from RCTs for atypical antipsychotics, especially olanzapine, aripiprazole and asenapine as well as mood stabilizers as valproate and carbamazepine. Mixed states are of a high clinical relevance and the DSM-5 criteria substantially reduced the diagnostic threshold. Besides advantages of a better characterization of patients with former DSM-IV-defined mixed episodes, disadvantages arise for example differential diagnoses with a substantial overlap in symptoms such as borderline personality disorders. Atypical antipsychotics, valproate and carbamazepine demonstrated efficacy in a limited sample of RCTs. The number of RCTs in the treatment of mixed states is highly limited. Furthermore, nearly all studies were funded by pharmaceutical companies which may lead to an underestimation of classical mood stabilizers such as lithium.

  11. Macroscopic quantum effects in the zero voltage state of the current biased Josephson junction

    International Nuclear Information System (INIS)

    Clarke, J.; Devoret, M.H.; Martinis, J.; Esteve, D.

    1985-05-01

    When a weak microwave current is applied to a current-biased Josephson tunnel junction in the thermal limit the escape rate from the zero voltage state is enhanced when the microwave frequency is near the plasma frequency of the junction. The resonance curve is markedly asymmetric because of the anharmonic properties of the potential well: this behavior is well explained by a computer simulation using a resistively shunted junction model. This phenomenon of resonant activation enables one to make in situ measurements of the capacitance and resistance shunting the junction, including contributions from the complex impedance presented by the current leads. For the relatively large area junctions studied in these experiments, the external capacitive loading was relatively unimportant, but the damping was entirely dominated by the external resistance

  12. LHCD current profile control experiments towards steady state improved confinement on JT-60U

    International Nuclear Information System (INIS)

    Ide, S.; Naito, O.; Oikawa, T.; Fujita, T.; Kondoh, T.; Seki, M.; Ushigusa, K.

    2001-01-01

    In JT-60U lower hybrid current drive (LHCD) experiments, a reversed magnetic shear configuration that was accompanied by the internal transport barriers was successfully maintained by means of LHCD almost in the full current drive quasi-steady state for 4.7 s. The normalized beta was kept near 1 and the neutron emission rate was almost steady as well indicating no accumulation of impurities into the plasma. Diagnostics data showed that all the profiles of the electron and ion temperatures, the electron density and the current profile were almost unchanged during the LHCD phase. Moreover, capability of LHCD in H-mode plasmas has been also investigated. It was found that the lower hybrid waves can be coupled to an H-mode edge plasma even with the plasma wall distance of about 14 cm. The maximum coupling distance was found to depend on the edge recycling. (author)

  13. SSAT State-of-the-Art Conference: Current Surgical Management of Gastric Tumors.

    Science.gov (United States)

    Norton, Jeffrey A; Kim, Teresa; Kim, Joseph; McCarter, Martin D; Kelly, Kaitlyn J; Wong, Joyce; Sicklick, Jason K

    2018-01-01

    The current era of gastric surgery is marked by low morbidity and mortality rates, innovative strategies to approach resections with a minimally invasive fashion or hyperthermic intraperitoneal chemotherapy (HIPEC), as well as improved understanding of the biology of sporadic and hereditary stromal, neuroendocrine, and epithelial malignancies. In 2017, the Society for Surgery of the Alimentary Tract convened a State-of-the-Art Conference on Current Surgical Management of Gastric Tumors with both international experts and emerging leaders in the field of gastric surgery. Martin D. McCarter, MD of the University of Colorado discussed the current management of gastric gastrointestinal stromal tumors (GIST). Kaitlyn J. Kelly, MD of the University of California, San Diego discussed the management of gastric carcinoid tumors. Jeffrey A. Norton of Stanford University discussed recent advances in the management of gastric adenocarcinoma including a focus on hereditary diffuse gastric cancer (HDGC). Joseph Kim, MD of Stony Brook University discussed a systematic approach to minimally invasive gastrectomy for cancer. Joyce Wong, MD of Pennsylvania State University discussed the role for cytoreductive surgery (CRS) and HIPEC for gastric adenocarcinoma. This review provides gastrointestinal surgeons with a concise update on the current surgical management of gastric tumors.

  14. Important configurations in six-quark N-N states. II. Current quark model

    International Nuclear Information System (INIS)

    Stancu, F.; Wilets, L.

    1989-01-01

    Quark basis states constructed from molecular-type orbitals were shown previously to be more convenient to use than cluster model states for N-N processes. The usual cluster model representation omits configurations which emerge naturally in a molecular basis which contains the same number of spatial functions. The importance of the omitted states was demonstrated for a constituent quark model. The present work extends the study to the prototypical current quark model, namely the MIT bag. In order to test the expansion for short-range N-N interactions, the eigenstates and eigenenergies of six quarks in a spherical bag, including one-gluon exchange, are calculated. The lowest eigenenergies are lowered significantly with respect to the usual cluster model. This reaffirms the importance of dynamics for obtaining the needed short-range repulsion

  15. Direct methods for limit states in structures and materials

    CERN Document Server

    Weichert, Dieter

    2014-01-01

    Knowing the safety factor for limit states such as plastic collapse, low cycle fatigue or ratcheting is always a major design consideration for civil and mechanical engineering structures that are subjected to loads. Direct methods of limit or shakedown analysis that proceed to directly find the limit states offer a better alternative than exact time-stepping calculations as, on one hand, an exact loading history is scarcely known, and on the other they are much less time-consuming. This book presents the state of the art on various topics concerning these methods, such as theoretical advances in limit and shakedown analysis, the development of relevant algorithms and computational procedures, sophisticated modeling of inelastic material behavior like hardening, non-associated flow rules, material damage and fatigue, contact and friction, homogenization and composites.

  16. Method for controlling low-energy high current density electron beams

    International Nuclear Information System (INIS)

    Lee, J.N.; Oswald, R.B. Jr.

    1977-01-01

    A method and an apparatus for controlling the angle of incidence of low-energy, high current density electron beams are disclosed. The apparatus includes a current generating diode arrangement with a mesh anode for producing a drifting electron beam. An auxiliary grounded screen electrode is placed between the anode and a target for controlling the average angle of incidence of electrons in the drifting electron beam. According to the method of the present invention, movement of the auxiliary screen electrode relative to the target and the anode permits reliable and reproducible adjustment of the average angle of incidence of the electrons in low energy, high current density relativistic electron beams

  17. Application of wavelet analysis to signal processing methods for eddy-current test

    International Nuclear Information System (INIS)

    Chen, G.; Yoneyama, H.; Yamaguchi, A.; Uesugi, N.

    1998-01-01

    This study deals with the application of wavelet analysis to detection and characterization of defects from eddy-current and ultrasonic testing signals of a low signal-to-noise ratio. Presented in this paper are the methods for processing eddy-current testing signals of heat exchanger tubes of a steam generator in a nuclear power plant. The results of processing eddy-current testing signals of tube testpieces with artificial flaws show that the flaw signals corrupted by noise and/or non-defect signals can be effectively detected and characterized by using the wavelet methods. (author)

  18. Three-dimensional analysis of eddy current with the finite element method

    International Nuclear Information System (INIS)

    Takano, Ichiro; Suzuki, Yasuo

    1977-05-01

    The finite element method is applied to three-dimensional analysis of eddy current induced in a large Tokamak device (JT-60). Two techniques to study the eddy current are presented: those of ordinary vector potential and modified vector potential. The latter is originally developed for decreasing dimension of the global matrix. Theoretical treatment of these two is given. The skin effect for alternate current flowing in the circular loop of rectangular cross section is examined as an example of the modified vector potential technique, and the result is compared with analytical one. This technique is useful in analysis of the eddy current problem. (auth.)

  19. Magnetic force microscopy method and apparatus to detect and image currents in integrated circuits

    Science.gov (United States)

    Campbell, Ann. N.; Anderson, Richard E.; Cole, Jr., Edward I.

    1995-01-01

    A magnetic force microscopy method and improved magnetic tip for detecting and quantifying internal magnetic fields resulting from current of integrated circuits. Detection of the current is used for failure analysis, design verification, and model validation. The interaction of the current on the integrated chip with a magnetic field can be detected using a cantilevered magnetic tip. Enhanced sensitivity for both ac and dc current and voltage detection is achieved with voltage by an ac coupling or a heterodyne technique. The techniques can be used to extract information from analog circuits.

  20. A Method for Eddy Current Field Measurement in Permanent Magnet Magnetic Resonance Imaging Systems

    Directory of Open Access Journals (Sweden)

    SONG Rui

    2018-03-01

    Full Text Available Magnetic resonance imaging (MRI is a widely used medical imaging technique. In MRI system, gradient magnetic fields are used to code spatial information. However, the fast-switching electric currents in the gradients coils used to generate gradient fields also induce vortex electric field, often referred as eddy current, in the surrounding metal conductors. In this paper, a method for eddy current field measurement was proposed. Based on the Faraday law of electromagnetic induction, an eddy current field measuring device was designed. Combining hardware acquisition and software processing, the eddy current field was obtained by subtracting the ideal gradient field from the magnetic field measured experimentally, whose waveform could be displayed in real time. The proposed method was verified by experimental results.

  1. Integrating resource efficiency and EU State aid. An evaluation of resource efficiency considerations in the current EU State aid framework

    Energy Technology Data Exchange (ETDEWEB)

    Bennink, D.; Faber, J.; Smit, M. [CE Delft, Delft (Netherlands); Goba, V. [SIA Estonian, Latvian and Lithuanian Environment ELLE, Tallinn (Estonia); Miller, K.; Williams, E. [AEA Technology plc, London (United Kingdom)

    2012-10-15

    This study, for the European Commission, analyses the issues that need to be addressed in the revision of the EU State aid framework to ensure that they do not hinder environmental, resource efficiency and sustainable development goals. In some cases, State aid can be considered an environmentally harmful subsidy (EHS). The study analyses (1) the extent to which the Environmental Aid Guidelines (EAG) need to be changed to take into account recent European environmental policy developments; (2) existing and potential resource efficiency considerations in a) the Regional Aid Guidelines; b) the Research, Development and Innovation (RDI) Guidelines and c) the Agriculture and Forestry Guidelines; assesses cases and schemes using these guidelines to identify whether resource efficiency considerations are taken into account. The study also considers the social, environmental and economic impacts of these cases and schemes. It develops recommendations for the review of the EAG and a number of horizontal guidelines. One of the conclusions of the analysis is that the way in which multiple objectives and impacts are balanced, when deciding to approve state aid, is unclear. Also, EU member states are not required to provide information on certain types of (estimated) impacts. To guarantee that multiple objectives and impacts are sufficiently balanced, it is recommended that the State aid framework prescribes that applicants identify social, economic and environmental objectives and impacts and describe how these are taken into account in the procedure of balancing multiple (conflicting) objectives. Objectives and impacts should be quantified as much as possible, for example by making use of the method of external cost calculation laid down in 'the Handbook on estimation of external costs in the transport Sector'. The results of the study are used by the European Commission as an input for evaluating and improving the EU State aid framework.

  2. Integrating resource efficiency and EU State aid. An evaluation of resource efficiency considerations in the current EU State aid framework

    Energy Technology Data Exchange (ETDEWEB)

    Bennink, D.; Faber, J.; Smit, M. [CE Delft, Delft (Netherlands); Goba, V. [SIA Estonian, Latvian and Lithuanian Environment ELLE, Tallinn (Estonia); Miller, K.; Williams, E. [AEA Technology plc, London (United Kingdom)

    2012-10-15

    This study, for the European Commission, analyses the issues that need to be addressed in the revision of the EU State aid framework to ensure that they do not hinder environmental, resource efficiency and sustainable development goals. In some cases, State aid can be considered an environmentally harmful subsidy (EHS). The study analyses (1) the extent to which the Environmental Aid Guidelines (EAG) need to be changed to take into account recent European environmental policy developments; (2) existing and potential resource efficiency considerations in a) the Regional Aid Guidelines; b) the Research, Development and Innovation (RDI) Guidelines and c) the Agriculture and Forestry Guidelines; assesses cases and schemes using these guidelines to identify whether resource efficiency considerations are taken into account. The study also considers the social, environmental and economic impacts of these cases and schemes. It develops recommendations for the review of the EAG and a number of horizontal guidelines. One of the conclusions of the analysis is that the way in which multiple objectives and impacts are balanced, when deciding to approve state aid, is unclear. Also, EU member states are not required to provide information on certain types of (estimated) impacts. To guarantee that multiple objectives and impacts are sufficiently balanced, it is recommended that the State aid framework prescribes that applicants identify social, economic and environmental objectives and impacts and describe how these are taken into account in the procedure of balancing multiple (conflicting) objectives. Objectives and impacts should be quantified as much as possible, for example by making use of the method of external cost calculation laid down in 'the Handbook on estimation of external costs in the transport Sector'. The results of the study are used by the European Commission as an input for evaluating and improving the EU State aid framework.

  3. Physician payment 2008 for interventionalists: current state of health care policy.

    Science.gov (United States)

    Manchikanti, Laxmaiah; Giordano, James

    2007-09-01

    Physicians in the United States have been affected by significant changes in the pattern(s) of medical practice evolving over the last several decades. These changes include new measures to 1) curb increasing costs, 2) increase access to patient care, 3) improve quality of healthcare, and 4) pay for prescription drugs. Escalating healthcare costs have focused concerns about the financial solvency of Medicare and this in turn has fostered a renewed interest in the economic basis of interventional pain management practices. The provision and systemization of healthcare in North America and several European countries are difficult enterprises to manage irrespective of whether these provisions and systems are privatized (as in the United States) or nationalized or seminationalized (as in Great Britain, Canada, Australia and France). Consequently, while many management options have been put forth, none seem to be optimally geared toward affording healthcare as a maximized individual and social good, and none have been completely enacted. The current physician fee schedule (released on July 12, 2007) includes a 9.9% cut in payment rate. Since the Medicare program was created in 1965, several methods have been used to determine physicians' rate(s) for each covered service. The sustained growth rate (SGR) system, established in 1998, has evoked negative consequences on physician payment(s). Based on the current Medicare expenditure index, practice expenses are projected to increase by 34.5% from 2002 to 2016, whereas, if actual practice inflation is considered, this increase will be 90%. This is in contrast to projected physician payment cuts that are depicted to be 51%. No doubt, this scenario will be devastating to many practices and the US medical community at large. Resolutions to this problem have been offered by MedPAC, the Government Accountability Office, physician organizations, economists, and various other interested groups. In the past, temporary measures have

  4. Separation Test Method for Investigation of Current Density Effects on Bond Wires of SiC Power MOSFET Modules

    DEFF Research Database (Denmark)

    Luo, Haoze; Iannuzzo, Francesco; Blaabjerg, Frede

    2017-01-01

    and average temperature during the test. By analyzing the output characteristics of the linear region of MOSFET, the constraint relations among the gate voltage, on-state voltage drop and junction temperature are revealed in this paper. The one-to-one correspondence between gate voltage and conduction power...... loss can be used to adjust the current density under fixed temperature swing and average temperature. The commercial Silicon Carbide (SiC) MOSFET modules are tested to experimentally verify the proposed method. Finally, the effectiveness of proposed test method is validated by the experimental results....

  5. Effect of localized states on the current-voltage characteristics of metal-semiconductor contacts with thin interfacial layer

    Science.gov (United States)

    Chattopadhyay, P.

    1994-10-01

    The role of discrete localized states on the current-voltage characteristics of metal-semiconductor contact is examined. It is seen that, because of these localized states, the logarithmic current vs voltage characteristics become nonlinear. Such nonlinearity is found sensitive to the temperature, and the energy and density of the localized states. The predicted temperature dependence of barrier height and the current-voltage characteristics are in agreement with the experimental results of Aboelfotoh [ Phys. Rev. B39, 5070 (1989)].

  6. Current drive studies for the ARIES steady-state tokamak reactors

    International Nuclear Information System (INIS)

    Mau, T.K.; Ehst, D.A.; Mandrekas, J.

    1994-01-01

    Steady-state plasma operating scenarios are designed for three versions of the ARIES reactor, using non-inductive current drive techniques that have an established database. R.f. waves, including fast and lower hybrid waves, are the reference drivers for the D-T burning ARIES-I and ARIES-II/IV, while neutral beam injection is employed for ARIES-III which burns D- 3 He. Plasma equilibria with a high bootstrap-current component have been used, in order to minimize the recirculating power fraction and cost of electricity. To maintain plasma stability, the driven current profile has been aligned with that of equilibrium by proper choices of the plasma profiles and power launch parameters. Except for ARIES-III, the current-drive power requirements and the relevant technology developments are found to be quite reasonable. The wave-power spectrum and launch requirements are also considered achievable with a modest development effort. Issues such as an improved database for fast-wave current drive, lower-hybrid power coupling to the plasma edge, profile control in the plasma core, and access to the design point of operation remain to be addressed. ((orig.))

  7. Mass transport and the bootstrap current from Ohm's law in steady-state tokamaks

    International Nuclear Information System (INIS)

    Kim, J.-S.; Greene, J.M.

    1989-01-01

    The consequences of mass conservation and Ohm's law are examined for steady state Tokamaks. In a Tokamak, magnetofluid-dynamic waves rapidly equilibrate pressure and toroidal field along magnetic surfaces. As a result, the detailed current distribution is determined by the flux surface averaged poloidal and toroidal currents. The electrons that carry the plasma current are impeded in their motion by interactions with ions, which is resistivity and its generalizations, and by interactions with electrons, which is viscosity and its generalizations. The important viscous terms arise from the interaction between trapped and untrapped electrons, and so viscosity acts by impeding poloidal current. properly chosen, the results of neoclassical theory are The neoclassical viscous coefficient is here regarded as less likely than Spitzer conductivity to be experimentally relevant in a turbulent Tokamak. Thus, the toroidal Ohm's law is regarded as being more reliable than the poloidal Ohm's law. A combination of toroidal and poloidal Ohm's law, namely the component parallel to the magnetic field, eliminates the influence of plasma fueling, and directly relates the bootstrap current and the pressure gradient. The latter is the usual relation, but, since i

  8. A new approach to control a deflection of an electroplated microstructure: dual current electroplating methods

    International Nuclear Information System (INIS)

    Yang, Hyun-Ho; Seo, Min-Ho; Han, Chang-Hoon; Yoon, Jun-Bo

    2013-01-01

    We propose and demonstrate a simple and novel method to control the deflection in a suspended microstructure by using a dual current electroplating (DuCE) method. The key concept of this method is to divide the structure into two layers—a bottom layer and a top layer—and then apply respective current densities in electroplating to those two layers while all other conditions are kept the same. In addition to a flat structure, the direction of structure bending is freely controlled by virtue of the DuCE method. Cantilever Ni beams with a length of 400 µm, which were electroplated by the conventional single current electroplating method, bent downward with a deflection of 3.4 µm. On the contrary, by the DuCE method, cantilever beams with a length of 400 µm showed an almost flat structure as desired. (The current densities of the bottom layer, the top layer, and the ratio of the two current densities, are 0.15, 1.24 A dm −2 , and 8.3, respectively.) Consequently, a nickel electroplated spiral structure with a length of 8600 µm was suspended flat with an end deflection of less than 0.7 µm (the ratio between the deflection and length is 0.007%). This work therefore represents the unprecedented ultra-long suspended microstructure with submicrometer deflection. (paper)

  9. Strength-based Supervision: Frameworks, Current Practice, and Future Directions A Wu-wei Method.

    Science.gov (United States)

    Edwards, Jeffrey K.; Chen, Mei-Whei

    1999-01-01

    Discusses a method of counseling supervision similar to the wu-wei practice in Zen and Taoism. Suggests that this strength-based method and an understanding of isomorphy in supervisory relationships are the preferred practice for the supervision of family counselors. States that this model of supervision potentiates the person-of-the-counselor.…

  10. Bivariate quadratic method in quantifying the differential capacitance and energy capacity of supercapacitors under high current operation

    Science.gov (United States)

    Goh, Chin-Teng; Cruden, Andrew

    2014-11-01

    Capacitance and resistance are the fundamental electrical parameters used to evaluate the electrical characteristics of a supercapacitor, namely the dynamic voltage response, energy capacity, state of charge and health condition. In the British Standards EN62391 and EN62576, the constant capacitance method can be further improved with a differential capacitance that more accurately describes the dynamic voltage response of supercapacitors. This paper presents a novel bivariate quadratic based method to model the dynamic voltage response of supercapacitors under high current charge-discharge cycling, and to enable the derivation of the differential capacitance and energy capacity directly from terminal measurements, i.e. voltage and current, rather than from multiple pulsed-current or excitation signal tests across different bias levels. The estimation results the author achieves are in close agreement with experimental measurements, within a relative error of 0.2%, at various high current levels (25-200 A), more accurate than the constant capacitance method (4-7%). The archival value of this paper is the introduction of an improved quantification method for the electrical characteristics of supercapacitors, and the disclosure of the distinct properties of supercapacitors: the nonlinear capacitance-voltage characteristic, capacitance variation between charging and discharging, and distribution of energy capacity across the operating voltage window.

  11. Status and current spent fuel storage practices in the United States

    International Nuclear Information System (INIS)

    Lake, W.H.

    1999-01-01

    Brief discussions are presented on the history and state of spent fuel generation by utilities that comprise the United States commercial nuclear power industry, the current situation regarding the Federal government's nuclear waste policy, and evolving spent fuel storage practices. These evolving spent fuel storage practices are the result of private sector initiatives, but appear to be influenced by various external factors. The paper is not intended to provide a comprehensive appraisal of the storage initiatives being conducted by the private sector. The focus, instead, is on the Federal government's role and activities related to spent fuel management. Although the Federal government has adopted a policy calling for deep geological disposal of spent fuel, the US Congress has recently begun to consider expanding that policy to include a centralized interim storage facility. In the absence of such an expanded policy, the Department of Energy has performed some preliminary activities that would expedite development of a centralized interim storage facility, if Congress were to enact such a policy. The Department's current activities with regard to developing a centralized interim storage facility, which are consistent with the current policy, are described in the paper. The paper also describes two important technical development activities that have been conducted by the Department of Energy to support improved efficiency in spent fuel management. The Department's activities regarding development of a burnup credit methodology, and a dry transfer system are summarized. (author)

  12. Current status of investigations in the field of solid state science in central Kazakstan region

    International Nuclear Information System (INIS)

    Kuketaev, T.A.

    1999-01-01

    Investigations in the field of solid state science were initiated together with foundation of University in Karaganda. Historically general investigations in this field were conducted for scientific directions related to optical, luminescent and radiation properties of wide gap insulator. This activity was carried out according to appropriate plans of coordination counsels en-gaged in the physics of insulators, luminescent and radiation physics at the Academy of Science USSR and in the Committee on sciences and engineering of the Counsel of Ministers of the USSR. A number of works were coordinated by the Academy of Sciences of Kazakhstan Republic. Investigations in the field of solid state science, con-ducted in the Central Kazakstan and coordinated by the Institute of Physics and Engineering of Kazakhstan National Academy of Sciences, can be currently distinguished according to scientific directions. Currently, the following scientific directions in the field of solid state science exist in the Central Kazakstan: influence of polymorph phase transitions on electron excitation in wide-gap crystals, radiation malformation and recombination, dielectric spectroscopy of crystals with hydrogen link, spectral and luminescent properties and energy migration processes in disordered and partly ordered systems of organic molecules. It is necessary to note that all investigated objects, described in this report, were recovered by investigators. That is, the relevant hardware is available

  13. Fed-state gastric media and drug analysis techniques: Current status and points to consider.

    Science.gov (United States)

    Baxevanis, Fotios; Kuiper, Jesse; Fotaki, Nikoletta

    2016-10-01

    Gastric fed state conditions can have a significant effect on drug dissolution and absorption. In vitro dissolution tests with simple aqueous media cannot usually predict drugs' in vivo response, as several factors such as the meal content, the gastric emptying and possible interactions between food and drug formulations can affect drug's pharmacokinetics. Good understanding of the effect of the in vivo fed gastric conditions on the drug is essential for the development of biorelevant dissolution media simulating the gastric environment after the administration of the standard high fat meal proposed by the FDA and the EMA in bioavailability/bioequivalence (BA/BE) studies. The analysis of drugs in fed state media can be quite challenging as most analytical protocols currently employed are time consuming and labour intensive. In this review, an overview of the in vivo gastric conditions and the biorelevant media used for their in vitro simulation are described. Furthermore an analysis of the physicochemical properties of the drugs and the formulations related to food effect is given. In terms of drug analysis, the protocols currently used for the fed state media sample treatment and analysis and the analytical challenges and needs emerging for more efficient and time saving techniques for a broad spectrum of compounds are being discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Two numerical methods for the solution of two-dimensional eddy current problems

    International Nuclear Information System (INIS)

    Biddlecombe, C.S.

    1978-07-01

    A general method for the solution of eddy current problems in two dimensions - one component of current density and two of magnetic field, is reported. After examining analytical methods two numerical methods are presented. Both solve the two dimensional, low frequency limit of Maxwell's equations for transient eddy currents in conducting material, which may be permeable, in the presence of other non-conducting permeable material. Both solutions are expressed in terms of the magnetic vector potential. The first is an integral equation method, using zero order elements in the discretisation of the unknown source regions. The other is a differential equation method, using a first order finite element mesh, and the Galerkin weighted residual procedure. The resulting equations are solved as initial-value problems. Results from programs based on each method are presented showing the power and limitations of the methods and the range of problems solvable. The methods are compared and recommendations are made for choosing between them. Suggestions are made for improving both methods, involving boundary integral techniques. (author)

  15. A new method for electric impedance imaging using an eddy current with a tetrapolar circuit.

    Science.gov (United States)

    Ahsan-Ul-Ambia; Toda, Shogo; Takemae, Tadashi; Kosugi, Yukio; Hongo, Minoru

    2009-02-01

    A new contactless technique for electrical impedance imaging, using an eddy current managed along with the tetrapolar circuit method, is proposed. The eddy current produced by a magnetic field is superimposed on a constant current that is normally used in the tetrapolar circuit method, and thus is used to control the current distribution in the body. By changing the current distribution, a set of voltage differences is measured with a pair of electrodes. This set of voltage differences is used in the image reconstruction of the resistivity distribution. The least square error minimization method is used in the reconstruction algorithm. The principle of this method is explained theoretically. A backprojection algorithm was used to get 2-D images. Based on this principle, a measurement system was developed and model experiments were conducted with a saline-filled phantom. The estimated shape of each model in the reconstructed image was similar to that of the corresponding model. From the results of these experiments, it is confirmed that the proposed method is applicable to the realization of electrical conductivity imaging.

  16. Assessment of Energy Production Potential from Ocean Currents along the United States Coastline

    Energy Technology Data Exchange (ETDEWEB)

    Haas, Kevin

    2013-09-15

    Increasing energy consumption and depleting reserves of fossil fuels have resulted in growing interest in alternative renewable energy from the ocean. Ocean currents are an alternative source of clean energy due to their inherent reliability, persistence and sustainability. General ocean circulations exist in the form of large rotating ocean gyres, and feature extremely rapid current flow in the western boundaries due to the Coriolis Effect. The Gulf Stream system is formed by the western boundary current of the North Atlantic Ocean that flows along the east coastline of the United States, and therefore is of particular interest as a potential energy resource for the United States. This project created a national database of ocean current energy resources to help advance awareness and market penetration in ocean current energy resource assessment. The database, consisting of joint velocity magnitude and direction probability histograms, was created from data created by seven years of numerical model simulations. The accuracy of the database was evaluated by ORNL?s independent validation effort documented in a separate report. Estimates of the total theoretical power resource contained in the ocean currents were calculated utilizing two separate approaches. Firstly, the theoretical energy balance in the Gulf Stream system was examined using the two-dimensional ocean circulation equations based on the assumptions of the Stommel model for subtropical gyres with the quasi-geostrophic balance between pressure gradient, Coriolis force, wind stress and friction driving the circulation. Parameters including water depth, natural dissipation rate and wind stress are calibrated in the model so that the model can reproduce reasonable flow properties including volume flux and energy flux. To represent flow dissipation due to turbines additional turbine drag coefficient is formulated and included in the model. Secondly, to determine the reasonableness of the total power

  17. Resting state fMRI: A review on methods in resting state connectivity analysis and resting state networks.

    Science.gov (United States)

    Smitha, K A; Akhil Raja, K; Arun, K M; Rajesh, P G; Thomas, Bejoy; Kapilamoorthy, T R; Kesavadas, Chandrasekharan

    2017-08-01

    The inquisitiveness about what happens in the brain has been there since the beginning of humankind. Functional magnetic resonance imaging is a prominent tool which helps in the non-invasive examination, localisation as well as lateralisation of brain functions such as language, memory, etc. In recent years, there is an apparent shift in the focus of neuroscience research to studies dealing with a brain at 'resting state'. Here the spotlight is on the intrinsic activity within the brain, in the absence of any sensory or cognitive stimulus. The analyses of functional brain connectivity in the state of rest have revealed different resting state networks, which depict specific functions and varied spatial topology. However, different statistical methods have been introduced to study resting state functional magnetic resonance imaging connectivity, yet producing consistent results. In this article, we introduce the concept of resting state functional magnetic resonance imaging in detail, then discuss three most widely used methods for analysis, describe a few of the resting state networks featuring the brain regions, associated cognitive functions and clinical applications of resting state functional magnetic resonance imaging. This review aims to highlight the utility and importance of studying resting state functional magnetic resonance imaging connectivity, underlining its complementary nature to the task-based functional magnetic resonance imaging.

  18. State of the art in protection of erosion-corrosion on vertical axis tidal current turbine

    Science.gov (United States)

    Musabikha, Siti; Utama, I. Ketut Aria Pria; Mukhtasor

    2018-05-01

    Vertical axis tidal current turbine is main part of ocean energy devices which converts the tidal current energy into electricity. Its development is arising too due to increased interest research topic concerning climate change mitigation. Due to its rotating movement, it will be induced mechanical forces, such as shear stress and/or particle impact. Because of its natural operations, vertical axis turbine is also being exposed to harsh and corroding marine environment itself. In order to secure the vertical tidal turbine devices from mechanical wear and corrosion effects which is lead to a material loss, an appropriate erosion-corrosion protection needs to be defined. Its protection actionscan be derived such as design factors, material selections, inhibitors usage, cathodic protections, and coatings. This paper aims to analyze protection method which is necessary to control erosion-corrosion phenomenon that appears to the vertical axis tidal current turbine.

  19. Method to predetermine current/power flow change in a dc grid

    DEFF Research Database (Denmark)

    2017-01-01

    occurs at one of the AC/DC converters; establishing a generalized droop feedback gain matrix G; controlling current/power flow within DC grid towards predefined setpoints, by use of control law. The invention presents an analytical approach to derive the generalized feedback gain allowing......The invention relates to a method for controlling current/power flow within a power transmission system, comprising two or more interconnected converter stations. The method comprises the steps of: providing a DC admittance matrix given from the DC grid; providing a current distribution matrix...... for a number of, such as for all possible AC/DC converter outages; providing a DC bus voltage vector for the DC grid; the DC bus voltage vector being a vector containing the values of the voltage change at the AC/DC converters, measured at the AC/DC converters, before, during and after a forced current change...

  20. Harmonic current layer method for the design of superconducting quadrupole magnetic field

    International Nuclear Information System (INIS)

    Zizek, F.

    1977-01-01

    The magnetic field of a superconducting quadrupole is investigated by the method of harmonic current layers of cylindrical shape. The superconducting winding is replaced by a system of thin current layers with a harmonically distributed density of the surface current along the circumference. The effect of the outer ferromagnetic circuit with an arbitrary constant permeability over the cross section is replaced analogically. The resultant magnetic field is then given by the superposition of the contributions from the individual current layers. The calculation method can be modified for the selection of the geometry of the winding for the latter to meet the demand for the high homogeneity of the gradient of magnetic induction in the working space of the superconducting quadrupole. (author)

  1. Shallow Lunar Seismic Activity and the Current Stress State of the Moon

    Science.gov (United States)

    Watters, Thomas R.; Weber, Renee C.; Collins, Geoffrey C.; Johnson, Catherine L.

    2017-01-01

    A vast, global network of more than 3200 lobate thrust fault scarps has been revealed in high resolution Lunar Reconnaissance Orbiter Camera (LROC) images. The fault scarps are very young, less than 50 Ma, based on their small scale and crisp appearance, crosscutting relations with small-diameter impact craters, and rates of infilling of associated small, shallow graben and may be actively forming today. The population of young thrust fault scarps provides a window into the recent stress state of the Moon and offers insight into the origin of global lunar stresses. The distribution of orientations of the fault scarps is non-random, inconsistent with isotropic stresses from late-stage global contraction as the sole source of stress. Modeling shows that tidal stresses contribute significantly to the current stress state of the lunar crust. Tidal stresses (orbital recession and diurnal tides) superimposed on stresses from global contraction result in non-isotropic compressional stress and may produce thrust faults consistent with lobate scarp orientations. At any particular point on the lunar surface, peak compressive stress will be reached at a certain time in the diurnal cycle. Coseismic slip events on currently active thrust faults are expected to be triggered when peak stresses are reached. Analysis of the timing of the 28 the shallow moonquakes recorded by the Apollo seismic network shows that 19 indeed occur when the Moon is closer to apogee, while only 9 shallow events occur when the Moon is closer to perigee. Here we report efforts to refine the model for the current stress state of the Moon by investigating the contribution of polar wander. Progress on relocating the epicentral locations of the shallow moonquakes using an algorithm designed for sparse networks is also reported.

  2. Tidal Stream Generators, current state and potential opportunities for condition monitoring

    DEFF Research Database (Denmark)

    Kappatos, Vassilios; Georgoulas, George; Avdelidis, Nicolas

    2016-01-01

    Tidal power industry has made significant progress towards commercialization over the past decade. Significant investments from sector leaders, strong technical progress and positive media coverage have established the credibility of this specific renewable energy source. However, its progress...... is being retarded by operation and maintenance problems, which results in very low operational availability times, as low as 25 %. This paper presents a literature review of the current state of tidal device operators as well as some commercial tidal turbine condition monitoring solutions. Furthermore......, an overview is given of the global tidal activity status (tidal energy market size and geography), the key industry activity and the regulations-standards related with tidal energy industry. Therefore, the main goal of this paper is to provide a bird’s view of the current status of the tidal power industry...

  3. Overview of steady-state tokamak operation and current drive experiments in TRIAM-1M

    International Nuclear Information System (INIS)

    Zushi, H.; Nakamura, K.; Hanada, K.

    2005-01-01

    Experiments aiming at 'day long operation at high performance' have been carried out. The record value of the discharge duration was updated to 5 h and 16 min. Steady-state tokamak operation (SSTO) is studied under the localized PWI conditions. The distributions of the heat load, the particle recycling flux and impurity source are investigated to understand the co-deposition and wall pumping. Formation and sustainment of an internal transport barrier ITB in enhanced current drive mode (ECD) has been investigated by controlling the lower hybrid driven current profile by changing the phase spectrum. An ITER relevant remote steering antenna for electron cyclotron wave ECW injection was installed and a relativistic Doppler resonance of the oblique propagating extraordinary wave with energetic electrons driven by lower hybrid waves was studied. (author)

  4. [Pathological gambling and computergame-addiction. Current state of research regarding two subtypes of behavioural addiction].

    Science.gov (United States)

    Wölfling, K; Müller, K W

    2010-04-01

    Behavioral addictions, like pathological gambling and computer game addiction (or internet addiction), have become a growing concern in research and public interest. Currently similarities between behavioral addictions and substance dependency are controversially discussed in the scientific community. Unfortunately a mismatch exists between the large number of people seeking treatment and the small number of scientific studies on pathological gambling and computer game addiction. Prevalence of pathological gambling among the German population is estimated to be 0.2-0.5%. These estimations are comparable to prevalence rates reported for drug dependency. Latest research states that about 3% of German adolescents and young adults are believed to suffer from computer game addiction. Therefore, it is important to enhance investigations regarding the clinical and neuroscientific basis of computer game addiction. This review offers a summary of current results of research regarding pathological gambling and internet addiction. The phenomenological description of these two disorders is meant to allow a deeper understanding of behavioral addictions.

  5. Current State and Future Perspectives of Energy Sources for Totally Implantable Cardiac Devices.

    Science.gov (United States)

    Bleszynski, Peter A; Luc, Jessica G Y; Schade, Peter; PhilLips, Steven J; Tchantchaleishvili, Vakhtang

    There is a large population of patients with end-stage congestive heart failure who cannot be treated by means of conventional cardiac surgery, cardiac transplantation, or chronic catecholamine infusions. Implantable cardiac devices, many designated as destination therapy, have revolutionized patient care and outcomes, although infection and complications related to external power sources or routine battery exchange remain a substantial risk. Complications from repeat battery replacement, power failure, and infections ultimately endanger the original objectives of implantable biomedical device therapy - eliminating the intended patient autonomy, affecting patient quality of life and survival. We sought to review the limitations of current cardiac biomedical device energy sources and discuss the current state and trends of future potential energy sources in pursuit of a lifelong fully implantable biomedical device.

  6. Analysis of Steady-State Error in Torque Current Component Control of PMSM Drive

    Directory of Open Access Journals (Sweden)

    BRANDSTETTER, P.

    2017-05-01

    Full Text Available The paper presents dynamic properties of a vector controlled permanent magnet synchronous motor drive supplied by a voltage source inverter. The paper deals with a control loop for the torque producing stator current. There is shown fundamental mathematical description for the vector control structure of the permanent magnet synchronous motor drive with respect to the current control for d-axis and q-axis of the rotor rotating coordinate system. The derivations of steady-state deviation for schemes with and without decoupling circuits are described for q-axis. The properties of both schemes are verified by MATLAB-SIMULINK program considering a lower and a higher value of inertia and by experimental measurements in our laboratory. The simulation and experimental results are presented and discussed at the end of the paper.

  7. An In-Rush Current Suppression Technique for the Solid-State Transfer Switch System

    Science.gov (United States)

    Cheng, Po-Tai; Chen, Yu-Hsing

    More and more utility companies provide dual power feeders as a premier service of high power quality and reliability. To take advantage of this, the solid-state transfer switch (STS) is adopted to protect the sensitive load against the voltage sag. However, the fast transfer process may cause in-rush current on the load-side transformer due to the resulting DC-offset in its magnetic flux as the load-transfer is completed. The in-rush current can reach 2∼6 p.u. and it may trigger the over-current protections on the power feeder. This paper develops a flux estimation scheme and a thyristor gating scheme based on the impulse commutation bridge STS (ICBSTS) to minimize the DC-offset on the magnetic flux. By sensing the line voltages of both feeders, the flux estimator can predict the peak transient flux linkage at the moment of load-transfer and evaluate a suitable moment for the transfer to minimize the in-rush current. Laboratory test results are presented to validate the performance of the proposed system.

  8. Current Guidelines, Common Clinical Pitfalls, and Future Directions for Laboratory Diagnosis of Lyme Disease, United States.

    Science.gov (United States)

    Moore, Andrew; Nelson, Christina; Molins, Claudia; Mead, Paul; Schriefer, Martin

    2016-07-01

    In the United States, Lyme disease is caused by Borrelia burgdorferi and transmitted to humans by blacklegged ticks. Patients with an erythema migrans lesion and epidemiologic risk can receive a diagnosis without laboratory testing. For all other patients, laboratory testing is necessary to confirm the diagnosis, but proper interpretation depends on symptoms and timing of illness. The recommended laboratory test in the United States is 2-tiered serologic analysis consisting of an enzyme-linked immunoassay or immunofluorescence assay, followed by reflexive immunoblotting. Sensitivity of 2-tiered testing is low (30%-40%) during early infection while the antibody response is developing (window period). For disseminated Lyme disease, sensitivity is 70%-100%. Specificity is high (>95%) during all stages of disease. Use of other diagnostic tests for Lyme disease is limited. We review the rationale behind current US testing guidelines, appropriate use and interpretation of tests, and recent developments in Lyme disease diagnostics.

  9. Comparison of a Label-Free Quantitative Proteomic Method Based on Peptide Ion Current Area to the Isotope Coded Affinity Tag Method

    Directory of Open Access Journals (Sweden)

    Young Ah Goo

    2008-01-01

    Full Text Available Recently, several research groups have published methods for the determination of proteomic expression profiling by mass spectrometry without the use of exogenously added stable isotopes or stable isotope dilution theory. These so-called label-free, methods have the advantage of allowing data on each sample to be acquired independently from all other samples to which they can later be compared in silico for the purpose of measuring changes in protein expression between various biological states. We developed label free software based on direct measurement of peptide ion current area (PICA and compared it to two other methods, a simpler label free method known as spectral counting and the isotope coded affinity tag (ICAT method. Data analysis by these methods of a standard mixture containing proteins of known, but varying, concentrations showed that they performed similarly with a mean squared error of 0.09. Additionally, complex bacterial protein mixtures spiked with known concentrations of standard proteins were analyzed using the PICA label-free method. These results indicated that the PICA method detected all levels of standard spiked proteins at the 90% confidence level in this complex biological sample. This finding confirms that label-free methods, based on direct measurement of the area under a single ion current trace, performed as well as the standard ICAT method. Given the fact that the label-free methods provide ease in experimental design well beyond pair-wise comparison, label-free methods such as our PICA method are well suited for proteomic expression profiling of large numbers of samples as is needed in clinical analysis.

  10. Life cycle impacts and costs of photovoltaic systems: Current state of the art and future outlooks

    Energy Technology Data Exchange (ETDEWEB)

    Raugei, Marco [Environmental Management Research Group, Escola Superior de Commerc Internacional-Universitat Pompeu Fabra, Passeig Pujades 1, 08003 Barcelona (Spain); Frankl, Paolo [Renewable Energy Unit, International Energy Agency, Rue de la Federation 9, 75739 Paris Cedex 15 (France)

    2009-03-15

    The photovoltaic energy sector is rapidly expanding and technological specification for PV has improved dramatically in the last two decades. This paper sketches the current state of the art and drafts three alternative scenarios for the future, in terms of costs, market penetration and environmental performance. According to these scenarios, if economic incentives are supported long enough into the next ten to twenty years, PV looks set for a rosy future, and is likely to play a significant role in the future energy mix, while at the same time contributing to reduce the environmental impact of electricity supply. (author)

  11. Learning Styles of Pilots Currently Qualified in United States Air Force Aircraft

    Science.gov (United States)

    Kanske, Craig A.

    2001-01-01

    Kolb's Learning Style Inventory was used to identify the predominant learning styles of pilots currently qualified in United States Air Force aircraft. The results indicate that these pilots show a significant preference for facts and things over people and feelings. By understanding the preferred learning styles of the target population, course material can be developed that take advantage of the strengths of these learning styles. This information can be especially useful in the future design of cockpit resource management training. The training program can be developed to demonstrate both that there are different learning styles and that it is possible to take advantage of the relative strengths of each of these learning styles.

  12. Life cycle impacts and costs of photovoltaic systems: Current state of the art and future outlooks

    International Nuclear Information System (INIS)

    Raugei, Marco; Frankl, Paolo

    2009-01-01

    The photovoltaic energy sector is rapidly expanding and technological specification for PV has improved dramatically in the last two decades. This paper sketches the current state of the art and drafts three alternative scenarios for the future, in terms of costs, market penetration and environmental performance. According to these scenarios, if economic incentives are supported long enough into the next ten to twenty years, PV looks set for a rosy future, and is likely to play a significant role in the future energy mix, while at the same time contributing to reduce the environmental impact of electricity supply. (author)

  13. International conference. Mental health consequences of the Chernobyl disaster: current state and future prospects

    International Nuclear Information System (INIS)

    Nyagu, A.I.

    1995-01-01

    Proceedings of the International Conference on the mental health consequences of the Chernobyl disaster: current state and future prospects was introduced.The questions connected with: 1. Mental health disorders biological basis after ionizing radiation influence; 2. Psychiatric aspects of the Chernobyl disaster; 3. Social stress following contradictory information: ways for its overcoming; 4. Rehabilitation and prophylactic measures for mental and nervous disorders. Psycho social rehabilitation of survivors; 5. Psychosomatic effects and somato-neurological consequences of the Chernobyl disaster; 6. Psychosomatic health of children and adolescents survivors of the Chernobyl disaster; 7. Brain damage as result of prenatal irradiation

  14. Passive measurement of flux nucleation in the current-induced resistive state of type I superconductors

    International Nuclear Information System (INIS)

    Selig, K.P.; Chimenti, D.E.; Huebener, R.P.

    1978-01-01

    Flux-tube nucleation rates have been measured in the current-induced resistive state of type I superconducting In films between 1.5 and 2.0 K by a completely passive technique. Indication of periodic nucleation is observed only in narrow regions of sample voltage drop, whose position is a sensitive function of temperature. Frequency bandwidth measurements of the nucleation rate yield a spectral purity of one part in 10 4 within the narrow regions where an experimental signal can be detected. (orig.) [de

  15. Globalization of Gerontology Education: Current Practices and Perceptions for Graduate Gerontology Education in the United States

    Science.gov (United States)

    MWANGI, SAMUEL M.; YAMASHITA, TAKASHI; EWEN, HEIDI H.; MANNING, LYDIA K.; KUNKEL, SUZANNE R.

    2013-01-01

    The purpose of this study is to document current practices and understandings about globalization of gerontology education in the United States. Better understanding of aging requires international perspectives in global communities. However, little is known about how globalization of gerontology education is practiced in U.S. graduate-level degree programs. The authors conducted qualitative interviews with representatives of the Association for Gerontology in Higher Education, the major national organization supporting higher education in gerontology, graduate program directors, and students. Although all respondents expressed their interest in globalizing gerontology education, actual practices are diverse. The authors discuss suggested conceptualization and strategies for globalizing gerontology education. PMID:22490075

  16. Current state and controversies in fertility preservation in women with breast cancer.

    Science.gov (United States)

    Taylan, Enes; Oktay, Kutluk H

    2017-06-10

    On average, over 25000 women are diagnosed with breast cancer under the age of 45 annually in the United States. Because an increasing number of young women delay childbearing to later life for various reasons, a growing population of women experience breast cancer before completing childbearing. In this context, preservation of fertility potential of breast cancer survivors has become an essential concept in modern cancer care. In this review, we will outline the currently available fertility preservation options for women with breast cancer of reproductive age, discuss the controversy behind hormonal suppression for gonadal protection against chemotherapy and highlight the importance of timely referral by cancer care providers.

  17. Film-induced Tourism in Finland : Its Current State and Opportunities

    OpenAIRE

    Anul, Kezban

    2013-01-01

    The goal of this paper was to evaluate the current state of film-induced tourism in Finland and to create suggestions for further development in the context of international markets. To the knowledge of the author, a comprehensive study about film-induced tourism in Finland has not been undertaken yet. Therefore, the thesis was designed in the form of an exploratory research with the aim to deliver some initial insights and key issues for the broad topic. The paper starts with a general ...

  18. Current State of Agile Methodologies Worldwide and in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Martin Tománek

    2015-06-01

    Full Text Available The objective of this research paper is to compare the current state of agile methodologies in the world and in the Czech Republic. The comparison is executed as the comparative analysis of two publicly available researches conducted in 2013 and published in 2014. The comparison is further enriched by the results of the unpublished survey in the global logistics company which was conducted also in 2013. The potential trend for agile methodologies in the Czech Republic is also discussed with regard to the worldwide trend.

  19. Metrology positronic issuers for nuclear medicine in Cuba: current state and development prospects

    International Nuclear Information System (INIS)

    Oropesa Verdecia, Pilar; Serra Águila, Rolando A.; García Rodríguez, Lourdes; Moreno León, Yecenia; Bell Hechavarría, Ailec; Jénez Magaña, Yoel

    2016-01-01

    At work the current state of metrology positronic issuers for nuclear medicine in Cuba is presented. the main achievements in the implementation of measurement standards and issues affecting the uncertainty of measurements at different levels of hierarchy of the existing chain of traceability for determinations of the activity of F-18 and Ga-68 is described, the main radionuclides expected to be used in the short term in PET and PET / CT applications in the country. Immediate prospects development of measurement standards positronic emitters for use in nuclear medicine in Cuba, in particular the possibilities of establishing equivalence between Cuban standards and national and international standards are also set. (author)

  20. Globalization of gerontology education: current practices and perceptions for graduate gerontology education in the United States.

    Science.gov (United States)

    Mwangi, Samuel M; Yamashita, Takashi; Ewen, Heidi H; Manning, Lydia K; Kunkel, Suzanne R

    2012-01-01

    The purpose of this study is to document current practices and understandings about globalization of gerontology education in the United States. Better understanding of aging requires international perspectives in global communities. However, little is known about how globalization of gerontology education is practiced in U.S. graduate-level degree programs. The authors conducted qualitative interviews with representatives of the Association for Gerontology in Higher Education, the major national organization supporting higher education in gerontology, graduate program directors, and students. Although all respondents expressed their interest in globalizing gerontology education, actual practices are diverse. The authors discuss suggested conceptualization and strategies for globalizing gerontology education.

  1. Teaching Methods in Mathematics and the Current Pedagogical Point of View in School Education.

    OpenAIRE

    岩崎, 潔; Kiyosi, Iwasaki

    1995-01-01

    It should be a basic principal that studies in teaching profession in universities should take into consideration the current pedagogical points of view in education and the future prospects of that education. This paper discusses the findings of a survey on the degree of recognition that students in our Math courses have about the currents pedagogical understading of teacher trainig. In this paper I will consider how to teach effectively teaching methods in Mathematics.

  2. Method of measuring the current density distribution and emittance of pulsed electron beams

    International Nuclear Information System (INIS)

    Schilling, H.B.

    1979-07-01

    This method of current density measurement employs an array of many Faraday cups, each cup being terminated by an integrating capacitor. The voltages of the capacitors are subsequently displayed on a scope, thus giving the complete current density distribution with one shot. In the case of emittance measurements, a moveable small-diameter aperture is inserted at some distance in front of the cup array. Typical results with a two-cathode, two-energy electron source are presented. (orig.)

  3. The essential theory of fast wave current drive with full wave method

    International Nuclear Information System (INIS)

    Liu Yan; Gong Xueyu; Yang Lei; Yin Chenyan; Yin Lan

    2007-01-01

    The full wave numerical method is developed for analyzing fast wave current drive in the range of ion cyclotron waves in tokamak plasmas, taking into account finite larmor radius effects and parallel dispersion. the physical model, the dispersion relation on the assumption of Finite Larmor Radius (FLR) effects and the form of full wave be used for computer simulation are developed. All of the work will contribute to further study of fast wave current drive. (authors)

  4. Fast Prediction Method for Steady-State Heat Convection

    KAUST Repository

    Wáng, Yì

    2012-03-14

    A reduced model by proper orthogonal decomposition (POD) and Galerkin projection methods for steady-state heat convection is established on a nonuniform grid. It was verified by thousands of examples that the results are in good agreement with the results obtained from the finite volume method. This model can also predict the cases where model parameters far exceed the sample scope. Moreover, the calculation time needed by the model is much shorter than that needed for the finite volume method. Thus, the nonuniform POD-Galerkin projection method exhibits high accuracy, good suitability, and fast computation. It has universal significance for accurate and fast prediction. Also, the methodology can be applied to more complex modeling in chemical engineering and technology, such as reaction and turbulence. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Gain optimization method of a DQW superluminescent diode with broad multi-state emission

    KAUST Repository

    Dimas, Clara E.

    2010-01-01

    Optimizing gain through systematic methods of varying current injection schemes analytically is significant to maximize experimentally device yield and evaluation. Various techniques are used to calculate the amplified spontaneous emission (ASE) gain for light emitting devices consisting of single-section and multiple-sections of even length. Recently double quantum well (DQW) superluminescent diodes (SLD) have shown a broad multi-state emission due to mutlielectrodes of non-equal lengths and at high non-equal current densities. In this study, we adopt an improved method utilizing an ASE intensity ratio to calibrate a gain curve based on the sum of the measured ASE spectra to efficiently estimate the gain. Although the laser gain for GaAs/AlGaAs material is well studied, the ASE gain of SLD devices has not been systematically studied particular to further explain the multiple-state emission observed in fabricated devices. In addition a unique gain estimate was achieved where the excited state gain clamps prior to the ground state due to approaching saturation levels. In our results, high current densities in long sectioned active regions achieved sufficient un-truncated gain that show evidence of excited state emission has been observed.

  6. Disease Management Evaluation: A Comprehensive Review of Current State of the Art

    OpenAIRE

    Conklin, Annalijn; Nolte, Ellen

    2011-01-01

    Many countries across Europe and elsewhere have been experimenting with various structured approaches to manage patients with chronic illness as a way to improve quality of care, reduce costs and lead to better population health outcomes in the long run. Despite a body of studies of disease management interventions, uncertainty about the effects of these remains not least because current guidance on evaluation methods and metrics require further development to enhance scientific rigour while ...

  7. Dynamics at Solid State Surfaces and Interfaces, Volume 1 Current Developments

    CERN Document Server

    Bovensiepen, Uwe; Wolf, Martin

    2010-01-01

    This two-volume work covers ultrafast structural and electronic dynamics of elementary processes at solid surfaces and interfaces, presenting the current status of photoinduced processes. Providing valuable introductory information for newcomers to this booming field of research, it investigates concepts and experiments, femtosecond and attosecond time-resolved methods, as well as frequency domain techniques. The whole is rounded off by a look at future developments.

  8. The History of Liquid Ear Acupuncture and the Current Scientific State of the Art

    OpenAIRE

    Daniela Litscher; Gerhard Litscher

    2016-01-01

    This short review article presents a current overview of existing publications and scientific results regarding liquid (ear) acupuncture. The injection of liquids into defined acupuncture points of the ear is not a method commonly used in the Western world. The term liquid acupuncture has different definitions, which makes understanding each definition and differentiating one from the other difficult. General terms like pharmacopuncture, homeosiniatry, and liquid acupuncture, which all descri...

  9. Tailored parameter optimization methods for ordinary differential equation models with steady-state constraints.

    Science.gov (United States)

    Fiedler, Anna; Raeth, Sebastian; Theis, Fabian J; Hausser, Angelika; Hasenauer, Jan

    2016-08-22

    analysis of the dataset for Raf/MEK/ERK signaling provides novel biological insights regarding the existence of feedback regulation. Many optimization problems considered in systems and computational biology are subject to steady-state constraints. While most optimization methods have convergence problems if these steady-state constraints are highly nonlinear, the methods presented recover the convergence properties of optimizers which can exploit an analytical expression for the parameter-dependent steady state. This renders them an excellent alternative to methods which are currently employed in systems and computational biology.

  10. Method of controlling illumination device based on current-voltage model

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to an illumination device comprising a number of LEDs, means for receiving an input signal, means for generating an activation signal for at least one of the LEDs based on the input signal. The illumination device comprises further means for obtaining the voltage...... and the colorimetric properties of said light emitted by LED. The present invention relates also to a method of controlling and a meted of calibrating such illumination device....... across and current through the LED and the means for generating the activation signal is adapted to generate the activating signal based on the voltage, the current and a current- voltage model related to LED. The current-voltage model defines a relationship between the current, the voltage...

  11. A pre-heating method based on sinusoidal alternating current for lithium-ion battery

    Science.gov (United States)

    Fan, Wentao; Sun, Fengchun; Guo, Shanshan

    2018-04-01

    In this paper, a method of low temperature pre-heating of sinusoidal alternating current (SAC) is proposed. Generally, the lower the frequency of the AC current, the higher the heat generation rate. Yet at low frequency, there is a risk of lithium-ion deposition during the half cycle of charging. This study develops a temperature-adaptive, deposition-free AC pre-heating method. a equivalent electric circuit(EEC) model is established to predict the heat generation rate and temperature status, whose parameters are calibrated from the EIS impedance measurements. The effects of current frequency and amplitude on the heating effect are investigated respectively. A multistep temperature-adaptive amplitude strategy is proposed and the cell can be heated from -20°C to 5°C within 509s at 100Hz frequency with this method.

  12. Biodiesel production through non-catalytic supercritical transesterification: current state and perspectives

    Directory of Open Access Journals (Sweden)

    C. da Silva

    2014-06-01

    Full Text Available The inconveniences of the conventional method for biodiesel production by alkaline catalysis suggests research towards alternative methods, with the non-catalytic transesterification using an alcohol at supercritical conditions proposed as a promising technique for biodiesel production. The so-called supercritical method (SCM has powerful advantages over conventional techniques, such as fast reaction rates, feedstock flexibility, production efficiency and environmentally friendly benefits. However, application of this methodology has some limitations, like operating conditions (elevated temperature and pressure and higher amounts of alcohol, which result in high energy costs and degradation of the products generated. In this review paper the state of the art in relation to the use of the SCM for biodiesel production is reported and discussed, describing the characteristics of the method, the influence of operational parameters on the ester yield, patents available in the field and the perspectives for application of the technique.

  13. Method for confining the magnetic field of the cross-tail current inside the magnetopause

    Science.gov (United States)

    Sotirelis, T.; Tsyganenko, N. A.; Stern, D. P.

    1994-01-01

    A method is presented for analytically representing the magnetic field due to the cross-tail current and its closure on the magnetopause. It is an extension of a method used by Tsyganenko (1989b) to confine the dipole field inside an ellipsoidal magnetopause using a scalar potential. Given a model of the cross-tail current, the implied net magnetic field is obtained by adding to the cross-tail current field a potential field B = - del gamma, which makes all field lines divide into two disjoint groups, separated by the magnetopause (i.e., the combined field is made to have zero normal component with the magnetopause). The magnetopause is assumed to be an ellipsoid of revolution (a prolate spheroid) as an approximation to observations (Sibeck et al., 1991). This assumption permits the potential gamma to be expressed in spheroidal coordinates, expanded in spheroidal harmonics and its terms evaluated by performing inversion integrals. Finally, the field outside the magnetopause is replaced by zero, resulting in a consistent current closure along the magnetopause. This procedure can also be used to confine the modeled field of any other interior magnetic source, though the model current must always flow in closed circuits. The method is demonstrated on the T87 cross-tail current, examples illustrate the effect of changing the size and shape of the prescribed magnetopause and a comparison is made to an independent numerical scheme based on the Biot-Savart equation.

  14. Assessing thermochromatography as a separation method for nuclear forensics. Current capability vis-a-vis forensic requirements

    International Nuclear Information System (INIS)

    Hanson, D.E.; Garrison, J.R.; Hall, H.L.

    2011-01-01

    Nuclear forensic science has become increasingly important for global nuclear security. However, many current laboratory analysis techniques are based on methods developed without the imperative for timely analysis that underlies the post-detonation forensics mission requirements. Current analysis of actinides, fission products, and fuel-specific materials requires time-consuming chemical separation coupled with nuclear counting or mass spectrometry. High-temperature gas-phase separations have been used in the past for the rapid separation of newly created elements/isotopes and as a basis for chemical classification of that element. We are assessing the utility of this method for rapid separation in the gas-phase to accelerate the separations of radioisotopes germane to post-detonation nuclear forensic investigations. The existing state of the art for thermo chromatographic separations, and its applicability to nuclear forensics, will be reviewed. (author)

  15. Non-local currents in 2D QFT: an alternative To - the quantum inverse scattering method

    International Nuclear Information System (INIS)

    Bernard, D.; Leclair, A.; Cornell Univ., Ithaca, NY

    1990-01-01

    The formalism based on non-local charges that we propose provides an alternative to the quantum inverse scattering method for solving integrable quantum field theories in 2D. The content of the paper is: 1. Introduction: historical background. 2. The NLC approach to 2D QFT: a summary. 3 Exchange algebras and on-shell conservation laws: why non-local charges are useful. 4. The lattice construction: the geometrical origin of non-local conserved currents. 5. The continuum construction: how to deal with non-local conserved currents. 6. Examples: Yangian and quantum group currents. 7 Conclusions: open problems. 22 refs., 4 figs

  16. Constant current coulometric method for the determination of uranium in active process solutions

    International Nuclear Information System (INIS)

    Chitnis, R.T.; Talnikar, S.G.; Paranjape, A.H.

    1980-01-01

    The determination of uranium in the range of 2.5-5 mg by constant current coulometry is described. The procedure is based on the modified version of the DAVIES - GRAY method, wherein uranium, after the reduction step, is oxidized by adding a known amount of potassium dichromate, and the excess of dichromate is determined by titration with Fe 2+ solution. Fe 2+ ions needed for the titration are generated in situ with 100% current efficiency by electrolytic reduction of Fe 3+ . The method is found to be accurate with a coefficient of variation better than 0.2%. (author)

  17. Lightning Return Stroke Current Analysis Using Electromagnetic Models and the 3D-FDTD Method

    Directory of Open Access Journals (Sweden)

    Kaddour Arzag

    2017-03-01

    Full Text Available The three dimensions finite difference time domain method (3D-FDTD is employed to calculate lightning return stoke current distributions in a vertical lightning channel. The latter is excited at its bottom by a lumped current source above a flat perfectly conducting ground. In this study four lightning return stroke electromagnetic models are used. The calculating approach, which is based on Taflove formulation of the 3D-FDTD method combined to the UPML boundary conditions, is implemented on Matlab environment. For validation needs, the obtained lightning return stroke space and time distributions are compared with others taken from specialized literature.

  18. Current Methods Applied to Biomaterials - Characterization Approaches, Safety Assessment and Biological International Standards.

    Science.gov (United States)

    Oliveira, Justine P R; Ortiz, H Ivan Melendez; Bucio, Emilio; Alves, Patricia Terra; Lima, Mayara Ingrid Sousa; Goulart, Luiz Ricardo; Mathor, Monica B; Varca, Gustavo H C; Lugao, Ademar B

    2018-04-10

    Safety and biocompatibility assessment of biomaterials are themes of constant concern as advanced materials enter the market as well as products manufactured by new techniques emerge. Within this context, this review provides an up-to-date approach on current methods for the characterization and safety assessment of biomaterials and biomedical devices from a physicalchemical to a biological perspective, including a description of the alternative methods in accordance with current and established international standards. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  19. Heats of formation of phosphorus compounds determined by current methods of computational quantum chemistry

    Science.gov (United States)

    Haworth, Naomi L.; Bacskay, George B.

    2002-12-01

    The heats of formation of a range of phosphorus containing molecules (P2, P4, PH, PH2, PH3, P2H2, P2H4, PO, PO2, PO3, P2O, P2O2, HPO, HPOH, H2POH, H3PO, HOPO, and HOPO2) have been determined by high level quantum chemical calculations. The equilibrium geometries and vibrational frequencies were computed via density functional theory, utilizing the B3LYP/6-31G(2df,p) functional and basis set. Atomization energies were obtained by the application of ab initio coupled cluster theory with single and double excitations from (spin)-restricted Hartree-Fock reference states with perturbative correction for triples [CCSD(T)], in conjunction with cc-pVnZ basis sets (n=T, Q, 5) which include an extra d function on the phosphorus atoms and diffuse functions on the oxygens, as recommended by Bauschlicher [J. Phys. Chem. A 103, 11126 (1999)]. The valence correlated atomization energies were extrapolated to the complete basis limit and corrected for core-valence (CV) correlation and scalar relativistic effects, as well as for basis set superposition errors (BSSE) in the CV terms. This methodology is effectively the same as the one adopted by Bauschlicher in his study of PO, PO2, PO3, HPO, HOPO, and HOPO2. Consequently, for these molecules the results of this work closely match Bauschlicher's computed values. The theoretical heats of formation, whose accuracy is estimated as ranging from ±1.0 to ±2.5 kcal mol-1, are consistent with the available experimental data. The current set of theoretical data represent a convenient benchmark, against which the results of other computational procedures, such as G3, G3X, and G3X2, can be compared. Despite the fact that G3X2 [which is an approximation to the quadratic CI procedure QCISD(T,Full)/G3Xlarge] is a formally higher level theory than G3X, the heats of formation obtained by these two methods are found to be of comparable accuracy. Both reproduce the benchmark heats of formation on the average to within ±2 kcal mol-1 and, for these

  20. Choosing the best ancestral character state reconstruction method.

    Science.gov (United States)

    Royer-Carenzi, Manuela; Pontarotti, Pierre; Didier, Gilles

    2013-03-01

    Despite its intrinsic difficulty, ancestral character state reconstruction is an essential tool for testing evolutionary hypothesis. Two major classes of approaches to this question can be distinguished: parsimony- or likelihood-based approaches. We focus here on the second class of methods, more specifically on approaches based on continuous-time Markov modeling of character evolution. Among them, we consider the most-likely-ancestor reconstruction, the posterior-probability reconstruction, the likelihood-ratio method, and the Bayesian approach. We discuss and compare the above-mentioned methods over several phylogenetic trees, adding the maximum-parsimony method performance in the comparison. Under the assumption that the character evolves according a continuous-time Markov process, we compute and compare the expectations of success of each method for a broad range of model parameter values. Moreover, we show how the knowledge of the evolution model parameters allows to compute upper bounds of reconstruction performances, which are provided as references. The results of all these reconstruction methods are quite close one to another, and the expectations of success are not so far from their theoretical upper bounds. But the performance ranking heavily depends on the topology of the studied tree, on the ancestral node that is to be inferred and on the parameter values. Consequently, we propose a protocol providing for each parameter value the best method in terms of expectation of success, with regard to the phylogenetic tree and the ancestral node to infer. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Mobile Healthcare and People with Disabilities: Current State and Future Needs

    Directory of Open Access Journals (Sweden)

    Michael Jones

    2018-03-01

    Full Text Available Significant health disparities exist between the general population and people with disabilities, particularly with respect to chronic health conditions. Mobile healthcare—the delivery of healthcare via mobile communication devices—is witnessing tremendous growth and has been touted as an important new approach for management of chronic health conditions. At present, little is known about the current state of mobile healthcare for people with disabilities. Early evidence suggests they are not well represented in the growth of mobile healthcare, and particularly the proliferation of mobile health software applications (mHealth apps for smartphones. Their omission in mHealth could lead to further health disparities. This article describes our research investigating the current state of mHealth apps targeting people with disabilities. Based on a multi-modal approach (literature review, Internet search, survey of disabled smartphone users, we confirm that people with disabilities are under-represented in the growth of mHealth. We identify several areas of future research and development needed to support the inclusion of people with disabilities in the mHealth revolution.

  2. Mobile Healthcare and People with Disabilities: Current State and Future Needs.

    Science.gov (United States)

    Jones, Michael; Morris, John; Deruyter, Frank

    2018-03-14

    Significant health disparities exist between the general population and people with disabilities, particularly with respect to chronic health conditions. Mobile healthcare-the delivery of healthcare via mobile communication devices-is witnessing tremendous growth and has been touted as an important new approach for management of chronic health conditions. At present, little is known about the current state of mobile healthcare for people with disabilities. Early evidence suggests they are not well represented in the growth of mobile healthcare, and particularly the proliferation of mobile health software applications (mHealth apps) for smartphones. Their omission in mHealth could lead to further health disparities. This article describes our research investigating the current state of mHealth apps targeting people with disabilities. Based on a multi-modal approach (literature review, Internet search, survey of disabled smartphone users), we confirm that people with disabilities are under-represented in the growth of mHealth. We identify several areas of future research and development needed to support the inclusion of people with disabilities in the mHealth revolution.

  3. Current State of Technology of Fuel Cell Power Systems for Autonomous Underwater Vehicles

    Directory of Open Access Journals (Sweden)

    Alejandro Mendez

    2014-07-01

    Full Text Available Autonomous Underwater Vehicles (AUVs are vehicles that are primarily used to accomplish oceanographic research data collection and auxiliary offshore tasks. At the present time, they are usually powered by lithium-ion secondary batteries, which have insufficient specific energies. In order for this technology to achieve a mature state, increased endurance is required. Fuel cell power systems have been identified as an effective means to achieve this endurance but no implementation in a commercial device has yet been realized. This paper summarizes the current state of development of the technology in this field of research. First, the most adequate type of fuel cell for this application is discussed. The prototypes and design concepts of AUVs powered by fuel cells which have been developed in the last few years are described. Possible commercial and experimental fuel cell stack options are analyzed, examining solutions adopted in the analogous aerial vehicle applications, as well as the underwater ones, to see if integration in an AUV is feasible. Current solutions in oxygen and hydrogen storage systems are overviewed and energy density is objectively compared between battery power systems and fuel cell power systems for AUVs. A couple of system configuration solutions are described including the necessary lithium-ion battery hybrid system. Finally, some closing remarks on the future of this technology are given.

  4. A current detection based on an extension of the Prony's method

    Energy Technology Data Exchange (ETDEWEB)

    Deng, C.; Xia, X.; Gong, F. [Changsha Univ. of Science and Technology, Changsha (China). College of Electrical Engineering

    2009-07-01

    The Prony method for spectrum estimation was combined with an adaptive frequency tracking and current frequency demultiplication method as a harmonic detection system. An injective active power filter was used for effective harmonic wave management. The automated system includes a digital signal processor and a high-speed interfacing device. An algorithm was developed to consider the slow voltage changes in the power grid as well as potential mutations in current harmonics. Widrow-Hoff's LMS algorithm was used to develop rolling steps for the filter. The method was used to detect harmonic waves with a sampling frequency of 400 Hz. Results of the study showed that the detection method can be used in real time to detect fundamental and first harmonics in electric power grids. 10 refs., 2 tabs., 1 fig.

  5. Progress Toward Steady State Tokamak Operation Exploiting the high bootstrap current fraction regime

    Science.gov (United States)

    Ren, Q.

    2015-11-01

    Recent DIII-D experiments have advanced the normalized fusion performance of the high bootstrap current fraction tokamak regime toward reactor-relevant steady state operation. The experiments, conducted by a joint team of researchers from the DIII-D and EAST tokamaks, developed a fully noninductive scenario that could be extended on EAST to a demonstration of long pulse steady-state tokamak operation. Fully noninductive plasmas with extremely high values of the poloidal beta, βp >= 4 , have been sustained at βT >= 2 % for long durations with excellent energy confinement quality (H98y,2 >= 1 . 5) and internal transport barriers (ITBs) generated at large minor radius (>= 0 . 6) in all channels (Te, Ti, ne, VTf). Large bootstrap fraction (fBS ~ 80 %) has been obtained with high βp. ITBs have been shown to be compatible with steady state operation. Because of the unusually large ITB radius, normalized pressure is not limited to low βN values by internal ITB-driven modes. βN up to ~4.3 has been obtained by optimizing the plasma-wall distance. The scenario is robust against several variations, including replacing some on-axis with off-axis neutral beam injection (NBI), adding electron cyclotron (EC) heating, and reducing the NBI torque by a factor of 2. This latter observation is particularly promising for extension of the scenario to EAST, where maximum power is obtained with balanced NBI injection, and to a reactor, expected to have low rotation. However, modeling of this regime has provided new challenges to state-of-the-art modeling capabilities: quasilinear models can dramatically underpredict the electron transport, and the Sauter bootstrap current can be insufficient. The analysis shows first-principle NEO is in good agreement with experiments for the bootstrap current calculation and ETG modes with a larger saturated amplitude or EM modes may provide the missing electron transport. Work supported in part by the US DOE under DE-FC02-04ER54698, DE-AC52-07NA

  6. Internet of Things: Current Challenges in the Quality Assurance and Testing Methods

    OpenAIRE

    Bures, Miroslav; Cerny, Tomas; Ahmed, Bestoun S.

    2018-01-01

    Contemporary development of the Internet of Things (IoT) technology brings a number of challenges in the Quality Assurance area. Current issues related to security, user's privacy, the reliability of the service, interoperability, and integration are discussed. All these create a demand for specific Quality Assurance methodology for the IoT solutions. In the paper, we present the state of the art of this domain and we discuss particular areas of system testing discipline, which is not covered...

  7. Lignite mining and electricity generation in Poland: The current state and future prospects

    International Nuclear Information System (INIS)

    Widera, Marek; Kasztelewicz, Zbigniew; Ptak, Miranda

    2016-01-01

    This opinion paper presents the current state and future scenarios of Polish lignite mining. For many years, over 1/3 of domestic electricity, that is about 53–55 TWh, has been generated by lignite-fired power plants. Currently, with 63–66 million tons of extraction, Poland is the fourth lignite producer worldwide and the second in the European Union. There are three possible scenarios for the development of lignite mining in Poland by 2050. Unfortunately, despite the huge lignite resources, amounting to more than 23.5 billion tons, and great potential of the mining industry, the future of Polish lignite mining does not look optimistic from the economic point of view. This is associated with social and environmental problems, including the European Union's climate and energy policy. However, this may change in the event of a global economic crisis and unstable geopolitical conditions. Therefore, a new energy doctrine for Poland at least by 2050 is urgently needed. - Highlights: •Poland is one of the leaders in lignite production in the European Union. •Energy policy in Poland assumes a key role of lignite in energy mix. •Almost one-third of Polish electricity is currently generated from lignite. •For Polish lignite mining exist pessimistic, realistic and optimistic scenarios. •Extraction of lignite in Poland will gradually decrease in the coming decades.

  8. Determining the Impact of Steady-State PV Fault Current Injections on Distribution Protection

    Energy Technology Data Exchange (ETDEWEB)

    Seuss, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reno, Matthew J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Grijalva, Santiago [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This report investigates the fault current contribution from a single large PV system and the impact it has on existing distribution overcurrent protection devices. Assumptions are made about the modeling of the PV system under fault to perform exhaustive steady - state fault analyses throughout distribution feeder models. Each PV interconnection location is tested to determine how the size of the PV system affects the fault current measured by each protection device. This data is then searched for logical conditions that indicate whether a protection device has operated in a manner that will cause more customer outages due to the addition of the PV system. This is referred to as a protection issue , and there are four unique types of issues that have been identified in the study. The PV system size at which any issues occur are recorded to determine the feeder's PV hosting capacity limitations due to interference with protection settings. The analysis is carried out on six feeder models. The report concludes with a discussion of the prevalence and cause of each protection issue caused by PV system fault current.

  9. MHz repetition rate solid-state driver for high current induction accelerators

    International Nuclear Information System (INIS)

    Brooksby, C; Caporaso, G; Goerz, D; Hanks, R; Hickman, B; Kirbie, H; Lee, B; Saethre, R.

    1999-01-01

    A research team from the Lawrence Livermore National Laboratory and Bechtel Nevada Corporation is developing an all solid-state power source for high current induction accelerators. The original power system design, developed for heavy-ion fusion accelerators, is based on the simple idea of using an array of field effect transistors to switch energy from a pre-charged capacitor bank to an induction accelerator cell. Recently, that idea has been expanded to accommodate the greater power needs of a new class of high-current electron accelerators for advanced radiography. For this purpose, we developed a 3-stage induction adder that uses over 4,000 field effect transistors to switch peak voltages of 45 kV at currents up to 4.8 kA with pulse repetition rates of up to 2 MHz. This radically advanced power system can generate a burst of five or more pulses that vary from 200 ns to 2 ampersand micro;s at a duty cycle of up to 25%. Our new source is precise, robust, flexible, and exceeds all previous drivers for induction machines by a factor of 400 in repetition rate and a factor of 1000 in duty cycle

  10. Medicinal use of cannabis in the United States: historical perspectives, current trends, and future directions.

    Science.gov (United States)

    Aggarwal, Sunil K; Carter, Gregory T; Sullivan, Mark D; ZumBrunnen, Craig; Morrill, Richard; Mayer, Jonathan D

    2009-01-01

    Cannabis (marijuana) has been used for medicinal purposes for millennia, said to be first noted by the Chinese in c. 2737 BCE. Medicinal cannabis arrived in the United States much later, burdened with a remarkably checkered, yet colorful, history. Despite early robust use, after the advent of opioids and aspirin, medicinal cannabis use faded. Cannabis was criminalized in the United States in 1937, against the advice of the American Medical Association submitted on record to Congress. The past few decades have seen renewed interest in medicinal cannabis, with the National Institutes of Health, the Institute of Medicine, and the American College of Physicians, all issuing statements of support for further research and development. The recently discovered endocannabinoid system has greatly increased our understanding of the actions of exogenous cannabis. Endocannabinoids appear to control pain, muscle tone, mood state, appetite, and inflammation, among other effects. Cannabis contains more than 100 different cannabinoids and has the capacity for analgesia through neuromodulation in ascending and descending pain pathways, neuroprotection, and anti-inflammatory mechanisms. This article reviews the current and emerging research on the physiological mechanisms of cannabinoids and their applications in managing chronic pain, muscle spasticity, cachexia, and other debilitating problems.

  11. Current state of commercial radiation detection equipment for homeland security applications

    International Nuclear Information System (INIS)

    Klann, R.T.; Shergur, J.; Mattesich, G.

    2009-01-01

    With the creation of the U.S. Department of Homeland Security (DHS) came the increased concern that terrorist groups would attempt to manufacture and use an improvised nuclear device or radiological dispersal device. As such, a primary mission of DHS is to protect the public against the use of these devices and to assist state and local responders in finding, locating, and identifying these types of devices and materials used to manufacture these devices. This assistance from DHS to state and local responders comes in the form of grant money to procure radiation detection equipment. In addition to this grant program, DHS has supported the development of American National Standards Institute standards for radiation detection equipment and has conducted testing of commercially available instruments. This paper identifies the types and kinds of commercially available equipment that can be used to detect and identify radiological material - for use in traditional search applications as well as primary and secondary screening of personnel, vehicles, and cargo containers. In doing so, key considerations for the conduct of operations are described as well as critical features of the instruments for specific applications. The current state of commercial instruments is described for different categories of detection equipment including personal radiation detectors, radioisotope identifiers, man-portable detection equipment, and radiation portal monitors. In addition, emerging technologies are also discussed, such as spectroscopic detectors and advanced spectroscopic portal monitors

  12. The Implementation Of Solid State Switches In A Parallel Configuration To Gain Output Current Capacity In A High Current Capacitive Discharge Unit (CDU).

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Mario Paul [Univ. of New Mexico, Albuquerque, NM (United States)

    2017-07-01

    For my project I have selected to research and design a high current pulse system, which will be externally triggered from a 5V pulse. The research will be conducted in the region of paralleling the solid state switches for a higher current output, as well as to see if there will be any other advantages in doing so. The end use of the paralleled solid state switches will be used on a Capacitive Discharge Unit (CDU). For the first part of my project, I have set my focus on the design of the circuit, selection of components, and simulation of the circuit.

  13. HIRFL-SSC trim coil currents calculation by conjugate gradients method

    International Nuclear Information System (INIS)

    Liu, W.

    2005-01-01

    For accelerating different kinds of ions to various energies, the HIRFL-SSC should form the corresponding isochronous magnetic field by its main coil and trim coils. Previously, there were errors in fitting the theoretical isochronous magnetic field in the small radius region, which led to some operation difficulties for ion acceleration in the inject region. After further investigation of the restrictive condition of the maximum current limitation, the trim coil currents for fitting the theoretical isochronous magnetic field were recalculated by the conjugate gradients method. Better results were obtained in the operation of HIRFL-SSC. This article introduces the procedure to calculate the trim coil currents. The calculation method of conjugate gradients is introduced and the fitting error is analysed. (author)

  14. A new method of CCD dark current correction via extracting the dark Information from scientific images

    Science.gov (United States)

    Ma, Bin; Shang, Zhaohui; Hu, Yi; Liu, Qiang; Wang, Lifan; Wei, Peng

    2014-07-01

    We have developed a new method to correct dark current at relatively high temperatures for Charge-Coupled Device (CCD) images when dark frames cannot be obtained on the telescope. For images taken with the Antarctic Survey Telescopes (AST3) in 2012, due to the low cooling efficiency, the median CCD temperature was -46°C, resulting in a high dark current level of about 3e-/pix/sec, even comparable to the sky brightness (10e-/pix/sec). If not corrected, the nonuniformity of the dark current could even overweight the photon noise of the sky background. However, dark frames could not be obtained during the observing season because the camera was operated in frame-transfer mode without a shutter, and the telescope was unattended in winter. Here we present an alternative, but simple and effective method to derive the dark current frame from the scientific images. Then we can scale this dark frame to the temperature at which the scientific images were taken, and apply the dark frame corrections to the scientific images. We have applied this method to the AST3 data, and demonstrated that it can reduce the noise to a level roughly as low as the photon noise of the sky brightness, solving the high noise problem and improving the photometric precision. This method will also be helpful for other projects that suffer from similar issues.

  15. Adaptation of eddy current methods to the multiple problems of reactor testing

    International Nuclear Information System (INIS)

    Stumm, W.

    1975-01-01

    In reactor testing, the eddy current method is mainly used for the testing of surface regions inside the pressure vessel, on welds and joints, and for the testing of thin-walled pipes, e.g. the heat exchanger pipes. (RW/AK) [de

  16. A method for crack profiles identification in eddy current testing by the multi-directional scan

    International Nuclear Information System (INIS)

    Kojima, Fumio; Ikeda, Takuya; Nguyen, Doung

    2006-01-01

    This paper is concerned with a method for identification of crack shape in conducting materials. Multi-directional scanning strategies using Eddy Current Testing is performed for sizing complex natural crackings. Two dimensional measurements by means of multi-directional scan are used in a output least square identifications. (author)

  17. 75 FR 49930 - Stakeholder Meeting Regarding Re-Evaluation of Currently Approved Total Coliform Analytical Methods

    Science.gov (United States)

    2010-08-16

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9190-2] Stakeholder Meeting Regarding Re-Evaluation of... conferences during which the Agency will have a technical dialogue with stakeholders regarding re-evaluation of currently approved Total Coliform Rule (TCR) analytical methods. At these meetings, stakeholders...

  18. A review of the current literature on aetiology and measurement methods of halitosis.

    NARCIS (Netherlands)

    Broek, A.M. van den; Feenstra, L.; Baat, C. de

    2007-01-01

    OBJECTIVES: This work reviews the current knowledge of aetiology and measurement methods of halitosis. DATA: Halitosis is an unpleasant or offensive odour emanating from the breath. The condition is multifactorial and may involve both oral and non-oral conditions. SOURCES: A private, monthly with

  19. Current matrix element in HAL QCD's wavefunction-equivalent potential method

    Science.gov (United States)

    Watanabe, Kai; Ishii, Noriyoshi

    2018-04-01

    We give a formula to calculate a matrix element of a conserved current in the effective quantum mechanics defined by the wavefunction-equivalent potentials proposed by the HAL QCD collaboration. As a first step, a non-relativistic field theory with two-channel coupling is considered as the original theory, with which a wavefunction-equivalent HAL QCD potential is obtained in a closed analytic form. The external field method is used to derive the formula by demanding that the result should agree with the original theory. With this formula, the matrix element is obtained by sandwiching the effective current operator between the left and right eigenfunctions of the effective Hamiltonian associated with the HAL QCD potential. In addition to the naive one-body current, the effective current operator contains an additional two-body term emerging from the degrees of freedom which has been integrated out.

  20. Non-contact current and voltage sensing method using a clamshell housing and a ferrite cylinder

    Science.gov (United States)

    Carpenter, Gary D.; El-Essawy, Wael; Ferreira, Alexandre Peixoto; Keller, Thomas Walter; Rubio, Juan C.; Schappert, Michael

    2016-04-26

    A method of measurement using a detachable current and voltage sensor provides an isolated and convenient technique for to measuring current passing through a conductor such as an AC branch circuit wire, as well as providing an indication of an electrostatic potential on the wire, which can be used to indicate the phase of the voltage on the wire, and optionally a magnitude of the voltage. The device includes a housing that contains the current and voltage sensors, which may be a ferrite cylinder with a hall effect sensor disposed in a gap along the circumference to measure current, or alternative a winding provided through the cylinder along its axis and a capacitive plate or wire disposed adjacent to, or within, the ferrite cylinder to provide the indication of the voltage.