WorldWideScience

Sample records for methods considered impractical

  1. Impractical CME programs: Influential parameters in Iran.

    Science.gov (United States)

    Faghihi, Seyed Aliakbar; Khankeh, Hamid Reza; Hosseini, Seyed Jalil; Soltani Arabshahi, Seyed Kamran; Faghih, Zahra; Shirazi, Mandana

    2017-01-01

    Background: Traditional approaches in Continuing Medical Education (CME) appear to be ineffective in any improvement of the patients' care, reducing the medical errors, and/or altering physicians' behaviors. However, they are still executed by the CME providers, and are popular among the majority of the physicians. In this study, we aimed to explore the parameters involved in the degree of effectiveness of CME program in Iran. Methods: In this study, 31 participants, consisting of general practitioners, CME experts and providers were recruited to participate in in-depth interviews and field observations concerning experiences with CME. Application was made of the qualitative paradigm along with the qualitative content analysis, using grounded theory data analysis methodology (constant comparative analysis). Results: Based on the participants' experiences, the insufficient consistency between the training program contents and the demands of GPs, in addition to the non-beneficiary programs for the physicians and the non-comprehensive educational designs, created a negative attitude to the continuing education among physicians. This could be defined by an unrealistic continuing education program, which is the main theme here. Conclusion: Impracticable continuing education has created a negative attitude toward the CME programs among physicians so much that they consider these programs less important, resulting in attending the said programs without any specific aim: they dodge absenteeism just to get the credit points. Evidently, promoting CME programs to improve the performance of the physicians requires factual needs assessment over and above adaptation of the contents to the physicians' performance.

  2. Considering play : From method to analysis

    NARCIS (Netherlands)

    van Vught, J.F.|info:eu-repo/dai/nl/413532682; Glas, M.A.J.|info:eu-repo/dai/nl/330981447

    2017-01-01

    This paper deals with play as an important methodological issue when studying games as texts and is intended as a practical methodological guide. After considering text as both the structuring object as well as its plural processual activations, we argue that different methodological considerations

  3. Evaluation of Different Methods for Considering Bar-Concrete ...

    African Journals Online (AJOL)

    theory, but the perfect bond assumption has been removed. The precision of the proposed method in considering the real nonlinear behavior of reinforced concrete frames has been compared to the precision of two other suggested methods for considering bond-slip effect in layer model. Among the capabilities of this ...

  4. Modifying nodal pricing method considering market participants optimality and reliability

    Directory of Open Access Journals (Sweden)

    A. R. Soofiabadi

    2015-06-01

    Full Text Available This paper develops a method for nodal pricing and market clearing mechanism considering reliability of the system. The effects of components reliability on electricity price, market participants’ profit and system social welfare is considered. This paper considers reliability both for evaluation of market participant’s optimality as well as for fair pricing and market clearing mechanism. To achieve fair pricing, nodal price has been obtained through a two stage optimization problem and to achieve fair market clearing mechanism, comprehensive criteria has been introduced for optimality evaluation of market participant. Social welfare of the system and system efficiency are increased under proposed modified nodal pricing method.

  5. Probabilistic Power Flow Method Considering Continuous and Discrete Variables

    Directory of Open Access Journals (Sweden)

    Xuexia Zhang

    2017-04-01

    Full Text Available This paper proposes a probabilistic power flow (PPF method considering continuous and discrete variables (continuous and discrete power flow, CDPF for power systems. The proposed method—based on the cumulant method (CM and multiple deterministic power flow (MDPF calculations—can deal with continuous variables such as wind power generation (WPG and loads, and discrete variables such as fuel cell generation (FCG. In this paper, continuous variables follow a normal distribution (loads or a non-normal distribution (WPG, and discrete variables follow a binomial distribution (FCG. Through testing on IEEE 14-bus and IEEE 118-bus power systems, the proposed method (CDPF has better accuracy compared with the CM, and higher efficiency compared with the Monte Carlo simulation method (MCSM.

  6. Distribution network planning method considering distributed generation for peak cutting

    International Nuclear Information System (INIS)

    Ouyang Wu; Cheng Haozhong; Zhang Xiubin; Yao Liangzhong

    2010-01-01

    Conventional distribution planning method based on peak load brings about large investment, high risk and low utilization efficiency. A distribution network planning method considering distributed generation (DG) for peak cutting is proposed in this paper. The new integrated distribution network planning method with DG implementation aims to minimize the sum of feeder investments, DG investments, energy loss cost and the additional cost of DG for peak cutting. Using the solution techniques combining genetic algorithm (GA) with the heuristic approach, the proposed model determines the optimal planning scheme including the feeder network and the siting and sizing of DG. The strategy for the site and size of DG, which is based on the radial structure characteristics of distribution network, reduces the complexity degree of solving the optimization model and eases the computational burden substantially. Furthermore, the operation schedule of DG at the different load level is also provided.

  7. Load forecasting method considering temperature effect for distribution network

    Directory of Open Access Journals (Sweden)

    Meng Xiao Fang

    2016-01-01

    Full Text Available To improve the accuracy of load forecasting, the temperature factor was introduced into the load forecasting in this paper. This paper analyzed the characteristics of power load variation, and researched the rule of the load with the temperature change. Based on the linear regression analysis, the mathematical model of load forecasting was presented with considering the temperature effect, and the steps of load forecasting were given. Used MATLAB, the temperature regression coefficient was calculated. Using the load forecasting model, the full-day load forecasting and time-sharing load forecasting were carried out. By comparing and analyzing the forecast error, the results showed that the error of time-sharing load forecasting method was small in this paper. The forecasting method is an effective method to improve the accuracy of load forecasting.

  8. Extended discrete-ordinate method considering full polarization state

    International Nuclear Information System (INIS)

    Box, Michael A.; Qin Yi

    2006-01-01

    This paper presents an extension to the standard discrete-ordinate method (DOM) to consider generalized sources including: beam sources which can be placed at any (vertical) position and illuminate in any direction, thermal emission from the atmosphere and angularly distributed sources which illuminate from a surface as continuous functions of zenith and azimuth angles. As special cases, the thermal emission from the surface and deep space can be implemented as angularly distributed sources. Analytical-particular solutions for all source types are derived using the infinite medium Green's function. Radiation field zenith angle interpolation using source function integration is developed for all source types. The development considers the full state of polarization, including the sources (as applicable) and the (BRDF) surface, but the development can be reduced easily to scalar problems and is ready to be implemented in a single set of code for both scalar and vector radiative transfer computation

  9. Extended discrete-ordinate method considering full polarization state

    Energy Technology Data Exchange (ETDEWEB)

    Box, Michael A. [School of Physics, University of New South Wales (Australia)]. E-mail: m.box@unsw.edu.au; Qin Yi [School of Physics, University of New South Wales (Australia)]. E-mail: yi.qin@csiro.au

    2006-01-15

    This paper presents an extension to the standard discrete-ordinate method (DOM) to consider generalized sources including: beam sources which can be placed at any (vertical) position and illuminate in any direction, thermal emission from the atmosphere and angularly distributed sources which illuminate from a surface as continuous functions of zenith and azimuth angles. As special cases, the thermal emission from the surface and deep space can be implemented as angularly distributed sources. Analytical-particular solutions for all source types are derived using the infinite medium Green's function. Radiation field zenith angle interpolation using source function integration is developed for all source types. The development considers the full state of polarization, including the sources (as applicable) and the (BRDF) surface, but the development can be reduced easily to scalar problems and is ready to be implemented in a single set of code for both scalar and vector radiative transfer computation.

  10. Proactive AP Selection Method Considering the Radio Interference Environment

    Science.gov (United States)

    Taenaka, Yuzo; Kashihara, Shigeru; Tsukamoto, Kazuya; Yamaguchi, Suguru; Oie, Yuji

    In the near future, wireless local area networks (WLANs) will overlap to provide continuous coverage over a wide area. In such ubiquitous WLANs, a mobile node (MN) moving freely between multiple access points (APs) requires not only permanent access to the Internet but also continuous communication quality during handover. In order to satisfy these requirements, an MN needs to (1) select an AP with better performance and (2) execute a handover seamlessly. To satisfy requirement (2), we proposed a seamless handover method in a previous study. Moreover, in order to achieve (1), the Received Signal Strength Indicator (RSSI) is usually employed to measure wireless link quality in a WLAN system. However, in a real environment, especially if APs are densely situated, it is difficult to always select an AP with better performance based on only the RSSI. This is because the RSSI alone cannot detect the degradation of communication quality due to radio interference. Moreover, it is important that AP selection is completed only on an MN, because we can assume that, in ubiquitous WLANs, various organizations or operators will manage APs. Hence, we cannot modify the APs for AP selection. To overcome these difficulties, in the present paper, we propose and implement a proactive AP selection method considering wireless link condition based on the number of frame retransmissions in addition to the RSSI. In the evaluation, we show that the proposed AP selection method can appropriately select an AP with good wireless link quality, i.e., high RSSI and low radio interference.

  11. Backtracking Method of Coloring Administrative Maps Considering Visual Perception Rules

    Directory of Open Access Journals (Sweden)

    WEI Zhiwei

    2018-03-01

    Full Text Available Color design in administrative maps should incorporate and balance area configuration, color harmony, and users' purposes. Based on visual perceptual rules, this paper quantifies color harmony, color contrast and perceptual balance in coloring administrative maps, and a model is suggested to evaluate the coloring quality after color template is selected. Then a backtracking method based on area balance is proposed to compute colored areas. Experiments show that this method can well meet visual perceptual rules while coloring administrative maps, and can be used for later map design.

  12. Mixed Methods Research: What Are the Key Issues to Consider?

    Science.gov (United States)

    Ghosh, Rajashi

    2016-01-01

    Mixed methods research (MMR) is increasingly becoming a popular methodological approach in several fields due to the promise it holds for comprehensive understanding of complex problems being researched. However, researchers interested in MMR often lack reference to a guide that can explain the key issues pertaining to the paradigm wars…

  13. A lifetime prediction method for LEDs considering mission profiles

    DEFF Research Database (Denmark)

    Qu, Xiaohui; Wang, Huai; Zhan, Xiaoqing

    2016-01-01

    and to benchmark the cost-competitiveness of different lighting technologies. The existing lifetime data released by LED manufacturers or standard organizations are usually applicable only for specific temperature and current levels. Significant lifetime discrepancies may be observed in field operations due...... to the varying operational and environmental conditions during the entire service time (i.e., mission profiles). To overcome the challenge, this paper proposes an advanced lifetime prediction method, which takes into account the field operation mission profiles and the statistical properties of the life data...

  14. A Lifetime Prediction Method for LEDs Considering Real Mission Profiles

    DEFF Research Database (Denmark)

    Qu, Xiaohui; Wang, Huai; Zhan, Xiaoqing

    2017-01-01

    operations due to the varying operational and environmental conditions during the entire service time (i.e., mission profiles). To overcome the challenge, this paper proposes an advanced lifetime prediction method, which takes into account the field operation mission profiles and also the statistical......The Light-Emitting Diode (LED) has become a very promising alternative lighting source with the advantages of longer lifetime and higher efficiency than traditional ones. The lifetime prediction of LEDs is important to guide the LED system designers to fulfill the design specifications...... properties of the life data available from accelerated degradation testing. The electrical and thermal characteristics of LEDs are measured by a T3Ster system, used for the electro-thermal modeling. It also identifies key variables (e.g., heat sink parameters) that can be designed to achieve a specified...

  15. Comparison of cell homogenization methods considering interaction effect between fuel cells and control rod cells

    International Nuclear Information System (INIS)

    Takeda, T.; Uto, N.

    1988-01-01

    Several methods to determine cell-averaged group cross sections and anisotropic diffusion coefficients which consider the interaction effect between core fuel cells and control rods or control rod followers have been compared to discuss the physical meaning included in cell homogenization. As the cell homogenization methods considered are the commonly used flux-weighting method, the reaction rate preservation method and the reactivity preservation method. These homogenization methods have been applied to control rod worth calculations in 1-D slab cores to investigate their applicability. (author). 6 refs, 2 figs, 9 tabs

  16. The Research of Regression Method for Forecasting Monthly Electricity Sales Considering Coupled Multi-factor

    Science.gov (United States)

    Wang, Jiangbo; Liu, Junhui; Li, Tiantian; Yin, Shuo; He, Xinhui

    2018-01-01

    The monthly electricity sales forecasting is a basic work to ensure the safety of the power system. This paper presented a monthly electricity sales forecasting method which comprehensively considers the coupled multi-factors of temperature, economic growth, electric power replacement and business expansion. The mathematical model is constructed by using regression method. The simulation results show that the proposed method is accurate and effective.

  17. Practical method of dynamic analysis considering coupling effects between equipment and piping systems

    International Nuclear Information System (INIS)

    Koyanagi, Ryoichi

    1984-01-01

    Many piping systems are supported by flexible structures or attached to thin shell walls so it is very important to consider the dynamic coupling effects between these systems in dynamic analysis. This paper presents a practical method of dynamic analysis of an individual system considering the dynamic coupling effects of coupled equipment-piping systems. In this method, dynamic responses are calculated by using the modal information which is obtained from the other analysis for associative structure. Analytical results for the complete model and of this method for an individual system are presented in the piping-supporting structure system and a piping-shell system. From the comparison of these results, it shows that this method is accurate, useful and economically applicable to the dynamic analysis of large model. (author)

  18. Considering induction factor using BEM method in wind farm layout optimization

    DEFF Research Database (Denmark)

    Ghadirian, Amin; Dehghan, M.; Torabi, F.

    2014-01-01

    For wind farm layout optimization process, a simple linear model has been mostly used for considering the wake effect of a wind turbine on its downstream turbines. In this model, the wind velocity in the wake behind a turbine is obtained as a function of turbine induction factor which...... was considered to be 0.324 almost in all the previous studies. However, it is obviously evident that this factor is a strong function of turbine blade geometry and operational conditions. In the present study, a new method is introduced by which the induction factor for wind turbines can be calculated based...... on the method of Blade Element Momentum theory. By this method, the effect of blade profile, wind speed and angular velocity of wind turbine on the induction factor can be easily taken into account. The results show that for different blade profiles and operational conditions, the induction factor differs from...

  19. A New Wavelet Threshold Determination Method Considering Interscale Correlation in Signal Denoising

    Directory of Open Access Journals (Sweden)

    Can He

    2015-01-01

    Full Text Available Due to simple calculation and good denoising effect, wavelet threshold denoising method has been widely used in signal denoising. In this method, the threshold is an important parameter that affects the denoising effect. In order to improve the denoising effect of the existing methods, a new threshold considering interscale correlation is presented. Firstly, a new correlation index is proposed based on the propagation characteristics of the wavelet coefficients. Then, a threshold determination strategy is obtained using the new index. At the end of the paper, a simulation experiment is given to verify the effectiveness of the proposed method. In the experiment, four benchmark signals are used as test signals. Simulation results show that the proposed method can achieve a good denoising effect under various signal types, noise intensities, and thresholding functions.

  20. Development of Test Method for Simple Shear and Prediction of Hardening Behavior Considering the Branchings Effect

    International Nuclear Information System (INIS)

    Kim, Dongwook; Bang, Sungsik; Kim, Minsoo; Lee, Hyungyil; Kim, Naksoo

    2013-01-01

    In this study we establish a process to predict hardening behavior considering the Branchings effect for zircaloy-4 sheets. When a metal is compressed after tension in forming, the yield strength decreases. For this reason, the Branchings effect should be considered in FE simulations of spring-back. We suggested a suitable specimen size and a method for determining the optimum tightening torque for simple shear tests. Shear stress-strain curves are obtained for five materials. We developed a method to convert the shear load-displacement curve to the effective stress-strain curve with Fea. We simulated the simple shear forward/reverse test using the combined isotropic/kinematic hardening model. We also investigated the change of the load-displacement curve by varying the hardening coefficients. We determined the hardening coefficients so that they follow the hardening behavior of zircaloy-4 in experiments

  1. Development of Test Method for Simple Shear and Prediction of Hardening Behavior Considering the Branchings Effect

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dongwook; Bang, Sungsik; Kim, Minsoo; Lee, Hyungyil; Kim, Naksoo [Sogang Univ., Seoul (Korea, Republic of)

    2013-10-15

    In this study we establish a process to predict hardening behavior considering the Branchings effect for zircaloy-4 sheets. When a metal is compressed after tension in forming, the yield strength decreases. For this reason, the Branchings effect should be considered in FE simulations of spring-back. We suggested a suitable specimen size and a method for determining the optimum tightening torque for simple shear tests. Shear stress-strain curves are obtained for five materials. We developed a method to convert the shear load-displacement curve to the effective stress-strain curve with Fea. We simulated the simple shear forward/reverse test using the combined isotropic/kinematic hardening model. We also investigated the change of the load-displacement curve by varying the hardening coefficients. We determined the hardening coefficients so that they follow the hardening behavior of zircaloy-4 in experiments.

  2. A Novel Quasi-3D Method for Cascade Flow Considering Axial Velocity Density Ratio

    Science.gov (United States)

    Chen, Zhiqiang; Zhou, Ming; Xu, Quanyong; Huang, Xudong

    2018-03-01

    A novel quasi-3D Computational Fluid Dynamics (CFD) method of mid-span flow simulation for compressor cascades is proposed. Two dimension (2D) Reynolds-Averaged Navier-Stokes (RANS) method is shown facing challenge in predicting mid-span flow with a unity Axial Velocity Density Ratio (AVDR). Three dimension (3D) RANS solution also shows distinct discrepancies if the AVDR is not predicted correctly. In this paper, 2D and 3D CFD results discrepancies are analyzed and a novel quasi-3D CFD method is proposed. The new quasi-3D model is derived by reducing 3D RANS Finite Volume Method (FVM) discretization over a one-spanwise-layer structured mesh cell. The sidewall effect is considered by two parts. The first part is explicit interface fluxes of mass, momentum and energy as well as turbulence. The second part is a cell boundary scaling factor representing sidewall boundary layer contraction. The performance of the novel quasi-3D method is validated on mid-span pressure distribution, pressure loss and shock prediction of two typical cascades. The results show good agreement with the experiment data on cascade SJ301-20 and cascade AC6-10 at all test condition. The proposed quasi-3D method shows superior accuracy over traditional 2D RANS method and 3D RANS method in performance prediction of compressor cascade.

  3. A DATA FIELD METHOD FOR URBAN REMOTELY SENSED IMAGERY CLASSIFICATION CONSIDERING SPATIAL CORRELATION

    Directory of Open Access Journals (Sweden)

    Y. Zhang

    2016-06-01

    Full Text Available Spatial correlation between pixels is important information for remotely sensed imagery classification. Data field method and spatial autocorrelation statistics have been utilized to describe and model spatial information of local pixels. The original data field method can represent the spatial interactions of neighbourhood pixels effectively. However, its focus on measuring the grey level change between the central pixel and the neighbourhood pixels results in exaggerating the contribution of the central pixel to the whole local window. Besides, Geary’s C has also been proven to well characterise and qualify the spatial correlation between each pixel and its neighbourhood pixels. But the extracted object is badly delineated with the distracting salt-and-pepper effect of isolated misclassified pixels. To correct this defect, we introduce the data field method for filtering and noise limitation. Moreover, the original data field method is enhanced by considering each pixel in the window as the central pixel to compute statistical characteristics between it and its neighbourhood pixels. The last step employs a support vector machine (SVM for the classification of multi-features (e.g. the spectral feature and spatial correlation feature. In order to validate the effectiveness of the developed method, experiments are conducted on different remotely sensed images containing multiple complex object classes inside. The results show that the developed method outperforms the traditional method in terms of classification accuracies.

  4. A method of network topology optimization design considering application process characteristic

    Science.gov (United States)

    Wang, Chunlin; Huang, Ning; Bai, Yanan; Zhang, Shuo

    2018-03-01

    Communication networks are designed to meet the usage requirements of users for various network applications. The current studies of network topology optimization design mainly considered network traffic, which is the result of network application operation, but not a design element of communication networks. A network application is a procedure of the usage of services by users with some demanded performance requirements, and has obvious process characteristic. In this paper, we first propose a method to optimize the design of communication network topology considering the application process characteristic. Taking the minimum network delay as objective, and the cost of network design and network connective reliability as constraints, an optimization model of network topology design is formulated, and the optimal solution of network topology design is searched by Genetic Algorithm (GA). Furthermore, we investigate the influence of network topology parameter on network delay under the background of multiple process-oriented applications, which can guide the generation of initial population and then improve the efficiency of GA. Numerical simulations show the effectiveness and validity of our proposed method. Network topology optimization design considering applications can improve the reliability of applications, and provide guidance for network builders in the early stage of network design, which is of great significance in engineering practices.

  5. A maintenance time prediction method considering ergonomics through virtual reality simulation.

    Science.gov (United States)

    Zhou, Dong; Zhou, Xin-Xin; Guo, Zi-Yue; Lv, Chuan

    2016-01-01

    Maintenance time is a critical quantitative index in maintainability prediction. An efficient maintenance time measurement methodology plays an important role in early stage of the maintainability design. While traditional way to measure the maintenance time ignores the differences between line production and maintenance action. This paper proposes a corrective MOD method considering several important ergonomics factors to predict the maintenance time. With the help of the DELMIA analysis tools, the influence coefficient of several factors are discussed to correct the MOD value and the designers can measure maintenance time by calculating the sum of the corrective MOD time of each maintenance therbligs. Finally a case study is introduced, by maintaining the virtual prototype of APU motor starter in DELMIA, designer obtains the actual maintenance time by the proposed method, and the result verifies the effectiveness and accuracy of the proposed method.

  6. The log mean heat transfer rate method of heat exchanger considering the influence of heat radiation

    International Nuclear Information System (INIS)

    Wong, K.-L.; Ke, M.-T.; Ku, S.-S.

    2009-01-01

    The log mean temperature difference (LMTD) method is conventionally used to calculate the total heat transfer rate of heat exchangers. Because the heat radiation equation contains the 4th order exponential of temperature which is very complicate in calculations, thus LMTD method neglects the influence of heat radiation. From the recent investigation of a circular duct in some practical situations, it is found that even in the situation of the temperature difference between outer duct surface and surrounding is low to 1 deg. C, the heat radiation effect can not be ignored in the situations of lower ambient convective heat coefficient and greater surface emissivities. In this investigation, the log mean heat transfer rate (LMHTR) method which considering the influence of heat radiation, is developed to calculate the total heat transfer rate of heat exchangers.

  7. An adaptive reentry guidance method considering the influence of blackout zone

    Science.gov (United States)

    Wu, Yu; Yao, Jianyao; Qu, Xiangju

    2018-01-01

    Reentry guidance has been researched as a popular topic because it is critical for a successful flight. In view that the existing guidance methods do not take into account the accumulated navigation error of Inertial Navigation System (INS) in the blackout zone, in this paper, an adaptive reentry guidance method is proposed to obtain the optimal reentry trajectory quickly with the target of minimum aerodynamic heating rate. The terminal error in position and attitude can be also reduced with the proposed method. In this method, the whole reentry guidance task is divided into two phases, i.e., the trajectory updating phase and the trajectory planning phase. In the first phase, the idea of model predictive control (MPC) is used, and the receding optimization procedure ensures the optimal trajectory in the next few seconds. In the trajectory planning phase, after the vehicle has flown out of the blackout zone, the optimal reentry trajectory is obtained by online planning to adapt to the navigation information. An effective swarm intelligence algorithm, i.e. pigeon inspired optimization (PIO) algorithm, is applied to obtain the optimal reentry trajectory in both of the two phases. Compared to the trajectory updating method, the proposed method can reduce the terminal error by about 30% considering both the position and attitude, especially, the terminal error of height has almost been eliminated. Besides, the PIO algorithm performs better than the particle swarm optimization (PSO) algorithm both in the trajectory updating phase and the trajectory planning phases.

  8. Improved Genetic Algorithm-Based Unit Commitment Considering Uncertainty Integration Method

    Directory of Open Access Journals (Sweden)

    Kyu-Hyung Jo

    2018-05-01

    Full Text Available In light of the dissemination of renewable energy connected to the power grid, it has become necessary to consider the uncertainty in the generation of renewable energy as a unit commitment (UC problem. A methodology for solving the UC problem is presented by considering various uncertainties, which are assumed to have a normal distribution, by using a Monte Carlo simulation. Based on the constructed scenarios for load, wind, solar, and generator outages, a combination of scenarios is found that meets the reserve requirement to secure the power balance of the power grid. In those scenarios, the uncertainty integration method (UIM identifies the best combination by minimizing the additional reserve requirements caused by the uncertainty of power sources. An integration process for uncertainties is formulated for stochastic unit commitment (SUC problems and optimized by the improved genetic algorithm (IGA. The IGA is composed of five procedures and finds the optimal combination of unit status at the scheduled time, based on the determined source data. According to the number of unit systems, the IGA demonstrates better performance than the other optimization methods by applying reserve repairing and an approximation process. To account for the result of the proposed method, various UC strategies are tested with a modified 24-h UC test system and compared.

  9. Methods for optimizing solutions when considering group arguments by team of experts

    Science.gov (United States)

    Chernyi, Sergei; Budnik, Vlad

    2017-11-01

    The article is devoted to methods of expert evaluation. The technology of expert evaluation is presented from the standpoint of precedent structures. In this paper, an aspect of the mathematical basis for constructing a component of decision analysis is considered. In fact, this approach leaves out any identification of their knowledge and skills of simulating organizational and manufacturing situations and taking efficient managerial decisions; it doesn't enable any identification and assessment of their knowledge on the basis of multi-informational and least loss-making methods and information technologies. Hence the problem is to research and develop a methodology for systemic identification of professional problem-focused knowledge acquired by employees operating adaptive automated systems of training management (AASTM operators), which shall also further the theory and practice of the intelligence-related aspects thereof.

  10. A method for gear fatigue life prediction considering the internal flow field of the gear pump

    Science.gov (United States)

    Shen, Haidong; Li, Zhiqiang; Qi, Lele; Qiao, Liang

    2018-01-01

    Gear pump is the most widely used volume type hydraulic pump, and it is the main power source of the hydraulic system. Its performance is influenced by many factors, such as working environment, maintenance, fluid pressure and so on. It is different from the gear transmission system, the internal flow field of gear pump has a greater impact on the gear life, therefore it needs to consider the internal hydraulic system when predicting the gear fatigue life. In this paper, a certain aircraft gear pump as the research object, aim at the typical failure forms, gear contact fatigue, of gear pump, proposing the prediction method based on the virtual simulation. The method use CFD (Computational fluid dynamics) software to analyze pressure distribution of internal flow field of the gear pump, and constructed the unidirectional flow-solid coupling model of gear to acquire the contact stress of tooth surface on Ansys workbench software. Finally, employing nominal stress method and Miner cumulative damage theory to calculated the gear contact fatigue life based on modified material P-S-N curve. Engineering practice show that the method is feasible and efficient.

  11. A Network Reconfiguration Method Considering Data Uncertainties in Smart Distribution Networks

    Directory of Open Access Journals (Sweden)

    Ke-yan Liu

    2017-05-01

    Full Text Available This work presents a method for distribution network reconfiguration with the simultaneous consideration of distributed generation (DG allocation. The uncertainties of load fluctuation before the network reconfiguration are also considered. Three optimal objectives, including minimal line loss cost, minimum Expected Energy Not Supplied, and minimum switch operation cost, are investigated. The multi-objective optimization problem is further transformed into a single-objective optimization problem by utilizing weighting factors. The proposed network reconfiguration method includes two periods. The first period is to create a feasible topology network by using binary particle swarm optimization (BPSO. Then the DG allocation problem is solved by utilizing sensitivity analysis and a Harmony Search algorithm (HSA. In the meanwhile, interval analysis is applied to deal with the uncertainties of load and devices parameters. Test cases are studied using the standard IEEE 33-bus and PG&E 69-bus systems. Different scenarios and comparisons are analyzed in the experiments. The results show the applicability of the proposed method. The performance analysis of the proposed method is also investigated. The computational results indicate that the proposed network reconfiguration algorithm is feasible.

  12. An Optimization Method for Condition Based Maintenance of Aircraft Fleet Considering Prognostics Uncertainty

    Directory of Open Access Journals (Sweden)

    Qiang Feng

    2014-01-01

    Full Text Available An optimization method for condition based maintenance (CBM of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL distribution of the key line replaceable Module (LRM has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success.

  13. A new method to consider human actions in the framework of a dynamic PSA

    International Nuclear Information System (INIS)

    Kloos, M.; Peschke, J.

    2006-01-01

    The variety of accident sequences to be considered in the framework of a PSA derives from mutual dependencies between the physical process, the behaviour of the technical system, human actions and stochastic influences along the time axis. Because the conventional PSA approach is not able to adequately account for these interactions, so-called probabilistic dynamics methods have been developed. They generally achieve a more realistic modelling of accident scenarios and a more realistic safety assessment. At GRS, the method MCDET - a combination of Monte Carlo Simulation und the Discrete Dynamic Event Tree method - was developed. The implementation of MCDET was supplemented by a so called Crew-Module which allows - together with a deterministic dynamics code - to simulate human actions as a dynamic process evolving over time in interaction with the system and process dynamics. The Crew-Module accounts for communications between crew members and for performance shaping factors like stress, knowledge or ergonomics. This paper presents the Crew- Module and gives an overview of the results which may be obtained from its combination with MCDET and a deterministic dynamics code. The emergency operating procedure 'Secondary Side Bleed and Feed' in a German PWR is selected as an illustrative application. (authors)

  14. Developing Common Set of Weights with Considering Nondiscretionary Inputs and Using Ideal Point Method

    Directory of Open Access Journals (Sweden)

    Reza Kiani Mavi

    2013-01-01

    Full Text Available Data envelopment analysis (DEA is used to evaluate the performance of decision making units (DMUs with multiple inputs and outputs in a homogeneous group. In this way, the acquired relative efficiency score for each decision making unit lies between zero and one where a number of them may have an equal efficiency score of one. DEA successfully divides them into two categories of efficient DMUs and inefficient DMUs. A ranking for inefficient DMUs is given but DEA does not provide further information about the efficient DMUs. One of the popular methods for evaluating and ranking DMUs is the common set of weights (CSW method. We generate a CSW model with considering nondiscretionary inputs that are beyond the control of DMUs and using ideal point method. The main idea of this approach is to minimize the distance between the evaluated decision making unit and the ideal decision making unit (ideal point. Using an empirical example we put our proposed model to test by applying it to the data of some 20 bank branches and rank their efficient units.

  15. A Method of Vector Map Multi-scale Representation Considering User Interest on Subdivision Gird

    Directory of Open Access Journals (Sweden)

    YU Tong

    2016-12-01

    Full Text Available Compared with the traditional spatial data model and method, global subdivision grid show a great advantage in the organization and expression of massive spatial data. In view of this, a method of vector map multi-scale representation considering user interest on subdivision gird is proposed. First, the spatial interest field is built using a large number POI data to describe the spatial distribution of the user interest in geographic information. Second, spatial factor is classified and graded, and its representation scale range can be determined. Finally, different levels of subdivision surfaces are divided based on GeoSOT subdivision theory, and the corresponding relation of subdivision level and scale is established. According to the user interest of subdivision surfaces, the spatial feature can be expressed in different degree of detail. It can realize multi-scale representation of spatial data based on user interest. The experimental results show that this method can not only satisfy general-to-detail and important-to-secondary space cognitive demands of users, but also achieve better multi-scale representation effect.

  16. Constructing Tissue Microarrays: Protocols and Methods Considering Potential Advantages and Disadvantages for Downstream Use.

    Science.gov (United States)

    Bingle, Lynne; Fonseca, Felipe P; Farthing, Paula M

    2017-01-01

    Tissue microarrays were first constructed in the 1980s but were used by only a limited number of researchers for a considerable period of time. In the last 10 years there has been a dramatic increase in the number of publications describing the successful use of tissue microarrays in studies aimed at discovering and validating biomarkers. This, along with the increased availability of both manual and automated microarray builders on the market, has encouraged even greater use of this novel and powerful tool. This chapter describes the basic techniques required to build a tissue microarray using a manual method in order that the theory behind the practical steps can be fully explained. Guidance is given to ensure potential disadvantages of the technique are fully considered.

  17. Comprehensive vulnerability assessment method for nodes considering anti-interference ability and influence

    Science.gov (United States)

    LUO, Jianchun; WANG, Yunyu; YANG, Jun; RAN, hong; PENG, Xiaodong; HUANG, Ming; FENG, Hao; LIU, Meijun

    2018-03-01

    The vulnerability assessment of power grid is of great significance in the current research. Power system faces many kinds of uncertainty factors, and the disturbance caused by them has become one of the main factors which restrict the safe operation of power grid. To solve this problem, considering the anti-interference ability of the system when the system is disturbed and the effect of the system when the node is out of operation, a set of index to reflect the anti-interference ability and the influence of nodes are set up. On this basis, a new comprehensive vulnerability assessment method of nodes is put forward by using super efficiency data envelopment analysis to scientific integration. Finally, the simulative results of IEEE30-bus system indicated that the proposed model is rational and valid.

  18. A Method of Retrospective Computerized System Validation for Drug Manufacturing Software Considering Modifications

    Science.gov (United States)

    Takahashi, Masakazu; Fukue, Yoshinori

    This paper proposes a Retrospective Computerized System Validation (RCSV) method for Drug Manufacturing Software (DMSW) that relates to drug production considering software modification. Because DMSW that is used for quality management and facility control affects big impact to quality of drugs, regulatory agency required proofs of adequacy for DMSW's functions and performance based on developed documents and test results. Especially, the work that explains adequacy for previously developed DMSW based on existing documents and operational records is called RCSV. When modifying RCSV conducted DMSW, it was difficult to secure consistency between developed documents and test results for modified DMSW parts and existing documents and operational records for non-modified DMSW parts. This made conducting RCSV difficult. In this paper, we proposed (a) definition of documents architecture, (b) definition of descriptive items and levels in the documents, (c) management of design information using database, (d) exhaustive testing, and (e) integrated RCSV procedure. As a result, we could conduct adequate RCSV securing consistency.

  19. A Multi-objective PMU Placement Method Considering Observability and Measurement Redundancy using ABC Algorithm

    Directory of Open Access Journals (Sweden)

    KULANTHAISAMY, A.

    2014-05-01

    Full Text Available This paper presents a Multi- objective Optimal Placement of Phasor Measurement Units (MOPP method in large electric transmission systems. It is proposed for minimizing the number of Phasor Measurement Units (PMUs for complete system observability and maximizing the measurement redundancy of the system, simultaneously. The measurement redundancy means that number of times a bus is able to monitor more than once by PMUs set. A higher level of measurement redundancy can maximize the total system observability and it is desirable for a reliable power system state estimation. Therefore, simultaneous optimization of the two conflicting objectives are performed using a binary coded Artificial Bee Colony (ABC algorithm. The complete observability of the power system is first prepared and then, single line loss contingency condition is considered to the main model. The efficiency of the proposed method is validated on IEEE 14, 30, 57 and 118 bus test systems. The valuable approach of ABC algorithm is demonstrated in finding the optimal number of PMUs and their locations by comparing the performance with earlier works.

  20. Stochastic Unit Commitment Based on Multi-Scenario Tree Method Considering Uncertainty

    Directory of Open Access Journals (Sweden)

    Kyu-Hyung Jo

    2018-03-01

    Full Text Available With the increasing penetration of renewable energy, it is difficult to schedule unit commitment (UC in a power system because of the uncertainty associated with various factors. In this paper, a new solution procedure based on a multi-scenario tree method (MSTM is presented and applied to the proposed stochastic UC problem. In this process, the initial input data of load and wind power are modeled as different levels using the mean absolute percentage error (MAPE. The load and wind scenarios are generated using Monte Carlo simulation (MCS that considers forecasting errors. These multiple scenarios are applied in the MSTM for solving the stochastic UC problem, including not only the load and wind power uncertainties, but also sudden outages of the thermal unit. When the UC problem has been formulated, the simulation is conducted for 24-h period by using the short-term UC model, and the operating costs and additional reserve requirements are thus obtained. The effectiveness of the proposed solution approach is demonstrated through a case study based on a modified IEEE-118 bus test system.

  1. Development of a Criticality Evaluation Method Considering the Particulate Behavior of Nuclear Fuel

    International Nuclear Information System (INIS)

    Sakai, Mikio; Yamamoto, Toshihiro; Murazaki, Minoru; Miyoshi, Yoshinori

    2005-01-01

    In conventional criticality evaluations of nuclear powder systems, effects of particulate behavior were not considered. In other words, it is difficult to take into account the particle motion in the criticality evaluations. We have developed a novel criticality evaluation code to resolve this problem. The criticality evaluation code, coupling a discrete element method simulation code with a continuous-energy Monte Carlo transport code, makes it possible to study the effects of the particulate dynamics on criticality. This criticality evaluation code is applied to the mixed-oxide (MOX) fuel powder agitation process. The criticality evaluations are performed while mixing the MOX fuel powder and an additive powder in a stirred vessel to investigate the effects of the powder free surface deformation and the particulate mixture state on the effective multiplication factor. The evaluation results reveal that the effective multiplication factor decreases due to the powder boundary deformation while it increases as the mixture condition of MOX powder and Zn-St powder is close to homogeneous

  2. Hospitalization costs of severe bacterial pneumonia in children: comparative analysis considering different costing methods.

    Science.gov (United States)

    Nunes, Sheila Elke Araujo; Minamisava, Ruth; Vieira, Maria Aparecida da Silva; Itria, Alexander; Pessoa, Vicente Porfirio; Andrade, Ana Lúcia Sampaio Sgambatti de; Toscano, Cristiana Maria

    2017-01-01

    To determine and compare hospitalization costs of bacterial community-acquired pneumonia cases via different costing methods under the Brazilian Public Unified Health System perspective. Cost-of-illness study based on primary data collected from a sample of 59 children aged between 28 days and 35 months and hospitalized due to bacterial pneumonia. Direct medical and non-medical costs were considered and three costing methods employed: micro-costing based on medical record review, micro-costing based on therapeutic guidelines and gross-costing based on the Brazilian Public Unified Health System reimbursement rates. Costs estimates obtained via different methods were compared using the Friedman test. Cost estimates of inpatient cases of severe pneumonia amounted to R$ 780,70/$Int. 858.7 (medical record review), R$ 641,90/$Int. 706.90 (therapeutic guidelines) and R$ 594,80/$Int. 654.28 (Brazilian Public Unified Health System reimbursement rates). Costs estimated via micro-costing (medical record review or therapeutic guidelines) did not differ significantly (p=0.405), while estimates based on reimbursement rates were significantly lower compared to estimates based on therapeutic guidelines (pmetodologias de custeio, na perspectiva do Sistema Único de Saúde. Estudo de custo, com coleta de dados primários de uma amostra de 59 crianças com 28 dias a 35 meses de idade hospitalizadas por pneumonia bacteriana. Foram considerados custos diretos médicos e não médicos. Três metodologias de custeio foram utilizadas: microcusteio por revisão de prontuários, microcusteio considerando diretriz terapêutica e macrocusteio por ressarcimento do Sistema Único de Saúde. Os custos estimados pelas diferentes metodologias foram comparados utilizando o teste de Friedman. Os custos hospitalares de crianças com pneumonia grave foram R$ 780,70 ($Int. 858.7) por revisão de prontuários, R$ 641,90 ($Int. 706.90) por diretriz terapêutica e R$ 594,80 ($Int. 654.28) por

  3. Fighting with Reality: Considering Mark Johnson's Pragmatic Realism through Bruce Lee's Jeet Kune Do Method

    Science.gov (United States)

    Miller, Alexander David

    2015-01-01

    This dissertation considers the supportive and complementary relation between Mark Johnson's embodied realism and Bruce Lee's Jeet Kune Do as a philosophical practice. In exploring this relationship, the emphasis on one's embodiment condition and its relationship with metaphor and self-expression are the primary focus. First, this work involves…

  4. Probabilistic evaluation method of stability of ground and slope considering spatial randomness of soil properties

    International Nuclear Information System (INIS)

    Ohtori, Yasuki

    2004-01-01

    In the JEAG4601-1987 (Japan Electric Association Guide for earthquake resistance design), either the conventional deterministic method or probabilistic method is used for evaluating the stability of ground foundations and surrounding slopes in nuclear power plants. The deterministic method, in which the soil properties of 'mean ± coefficient x standard deviation' is adopted for the calculations, is generally used in the design stage to data. On the other hand, the probabilistic method, in which the soil properties assume to have probabilistic distributions, is stated as a future method. The deterministic method facilitates the evaluation, however, it is necessary to clarify the relation with the probabilistic method. In this paper, the relationship between the deterministic and the probabilistic methods are investigated. To do that, a simple model that can take into account the dynamic effect of structures and a simplified method for accounting the spatial randomness are proposed and used for the studies. As the results of studies, it is found that the strength of soil properties is most importation factor for the stability of ground structures and the probability below the safety factor evaluated with the soil properties of mean -1.0 x standard deviation' by the deterministic method is of much lower. (author)

  5. Significance tests in mutagen screening: another method considering historical control frequencies

    International Nuclear Information System (INIS)

    Traut, H.

    1983-01-01

    Recently a method has been devised for testing the significance of the difference between a mutation frequency observed after chemical treatment or iradiation and the historical ('stable') control frequency. Another test is proposed serving the same purpose. Both methods are applied to several examples (experimental frequency versus historical control frequency). The results (P values) obtained agree well. (author)

  6. Method for assessing reliability of a network considering probabilistic safety assessment

    International Nuclear Information System (INIS)

    Cepin, M.

    2005-01-01

    A method for assessment of reliability of the network is developed, which uses the features of the fault tree analysis. The method is developed in a way that the increase of the network under consideration does not require significant increase of the model. The method is applied to small examples of network consisting of a small number of nodes and a small number of their connections. The results give the network reliability. They identify equipment, which is to be carefully maintained in order that the network reliability is not reduced, and equipment, which is a candidate for redundancy, as this would improve network reliability significantly. (author)

  7. Development of seismic analysis method considered FSI effect on a neutron reflector for APWR reactor internals

    Energy Technology Data Exchange (ETDEWEB)

    Hideyuki, Morika; Tomomichi, Nakamura [Mitsubishi Heavy Industries Ltd., Takasago R and D Center, Hyogo (Japan); Toshio, Ichikawa; Kazuo, Hirota; Hiroyuki, Murakiso [Mitsubishi Heavy Industries Ltd., Kobe Shipyard and Machinery Works, Hyogo, Kobe (Japan); Minoru, Murota [Japan Atomic Power Co., Tokyo (Japan)

    2004-07-01

    A Neutron Reflector (NR) is a new structure designed for improving the structure reliability of Advanced Pressurized Water Reactors (APWR,). The NR is placed in a narrow gap between the NR and a Core Barrel (CB). In the case of a structure surrounded by liquid in a narrow gap, the added fluid mass and the damping increases compared with in the air. This effect is famous for Fluid-Structure Interaction effect (FSI effect) in the narrow gap and it depends on the vibration displacement of the structure. A new method to estimate the added fluid damping for this case has been introduced by some of the authors in 2001, which is based on a narrow passage flow theory (Morita et al., 2001). Following this theory, a vibration test was performed to assess the appropriateness of the analysis method employed to measure the response of the NR during an earthquake (Nakamura et al., 2002). In this paper, results of a model test are shown comparing the data with the calculated ones based on the new analysis method that is combined the above method with the ANSYS computer code. As a result, a new seismic analysis method using the above theory was developed. The analytical results are in good agreement with the test results. (authors)

  8. Sustainability Life Cycle Cost Analysis of Roof Waterproofing Methods Considering LCCO2

    Directory of Open Access Journals (Sweden)

    Sangyong Kim

    2013-12-01

    Full Text Available In a construction project, selection of an appropriate method in the planning/design stage is very important for ensuring effective project implementation and success. Many companies have adopted the life cycle cost (LCC method, one of the methods for analyzing economic efficiency, for appropriate decision-making in the basic/detailed design stage by estimating overall costs and expenses generated over the entire project. This paper presents an LCC method for calculating the LCC of CO2 (LCCO2, based on materials committed during the lifecycle of a structure for each roof waterproofing method and adding this cost to the LCC for comparative analysis. Thus, this technique presents the LCC that includes the cost of CO2 emission. The results show that in terms of initial construction cost, asphalt waterproofing had the highest CO2 emission cost, followed by sheet waterproofing. LCCO2 did not greatly influence the initial construction cost and maintenance cost, as it is relatively smaller than the LCC. However, when the number of durable years was changed, the LCC showed some changes.

  9. Activity measurement by using γ-ray sum peak method considering intake radioactivity and its application

    International Nuclear Information System (INIS)

    Miyahara, Hiroshi; Narita, Norihiko; Tomita, Kenichi; Katoh, Yoshichika; Mori, Chizuo; Momose, Takumaro; Shinohara, Kunihiko

    2000-01-01

    It is important to measure external and internal exposure dose in the case of accident. The external exposure can be measured by various dosimeters, but the internal exposure is usually calculated from estimated amounts of intake radioactivity because of difficulty of direct measurement. Detection efficiency of human counter used in direct measurement is necessary, but there is no effective method to determine it for non-uniform distribution. The γ-ray sum peak method is tried for the cascade γ-ray emitter under the consideration of small diffusion such as just after intake. After disintegration rates of sources of 46 Sc and 60 Co were determined by 4πβ-γ coincidence method, γ-ray spectra were measured at various positions. Calculated disintegration rates by sum peak method agreed with those by coincidence method within 10%. The similar results were obtained for distributed plural sources in restricted condition. It is also investigated as application for the case that the other nuclide is contained in it. Using peak-to-total ratios measured in advance, the disintegration rates were determined only from the peak intensities. In this case the results had systematic uncertainty of about 20%. (author)

  10. Active Power Dispatch Method for a Wind Farm Central Controller Considering Wake Effect

    DEFF Research Database (Denmark)

    Tian, Jie; Su, Chi; N. Soltani, Mohsen

    2014-01-01

    With the increasing integration of the wind power into the power system, wind farm are required to be controlled as a single unit and have all the same control tasks as conventional power plants. The wind farm central controller receives control orders from Transmission System Operator (TSO), the...... Optimization (PSO) is used to obtain the optimal wind power for each wind turbine. A case study is carried out. The available wind power of the wind farm was compared between the traditional dispatch method and the proposed dispatch method with the consideration of the wake effect....

  11. A Hybrid Optimization Method for Reactive Power and Voltage Control Considering Power Loss Minimization

    DEFF Research Database (Denmark)

    Liu, Chengxi; Qin, Nan; Bak, Claus Leth

    2015-01-01

    This paper proposes a hybrid optimization method to optimally control the voltage and reactive power with minimum power loss in transmission grid. This approach is used for the Danish automatic voltage control (AVC) system which is typically a non-linear non-convex problem mixed with both...

  12. Ranking Method for Peak-Load Shifting Considering Different Types of Data

    DEFF Research Database (Denmark)

    Wang, Peng; Wen, Fushuan; Pinson, Pierre

    2016-01-01

    , an evaluation system for the purpose of peak-load shifting is established from three aspects: economic, social, and environmental impacts. Then a mixed-data dominance method is employed in this work to determine the comprehensive closeness degree of each user under each index, and an optimal comprehensive...

  13. Incrementally Detecting Change Types of Spatial Area Object: A Hierarchical Matching Method Considering Change Process

    Directory of Open Access Journals (Sweden)

    Yanhui Wang

    2018-01-01

    Full Text Available Detecting and extracting the change types of spatial area objects can track area objects’ spatiotemporal change pattern and provide the change backtracking mechanism for incrementally updating spatial datasets. To respond to the problems of high complexity of detection methods, high redundancy rate of detection factors, and the low automation degree during incrementally update process, we take into account the change process of area objects in an integrated way and propose a hierarchical matching method to detect the nine types of changes of area objects, while minimizing the complexity of the algorithm and the redundancy rate of detection factors. We illustrate in details the identification, extraction, and database entry of change types, and how we achieve a close connection and organic coupling of incremental information extraction and object type-of-change detection so as to characterize the whole change process. The experimental results show that this method can successfully detect incremental information about area objects in practical applications, with the overall accuracy reaching above 90%, which is much higher than the existing weighted matching method, making it quite feasible and applicable. It helps establish the corresponding relation between new-version and old-version objects, and facilitate the linked update processing and quality control of spatial data.

  14. Improved Battery Parameter Estimation Method Considering Operating Scenarios for HEV/EV Applications

    Directory of Open Access Journals (Sweden)

    Jufeng Yang

    2016-12-01

    Full Text Available This paper presents an improved battery parameter estimation method based on typical operating scenarios in hybrid electric vehicles and pure electric vehicles. Compared with the conventional estimation methods, the proposed method takes both the constant-current charging and the dynamic driving scenarios into account, and two separate sets of model parameters are estimated through different parts of the pulse-rest test. The model parameters for the constant-charging scenario are estimated from the data in the pulse-charging periods, while the model parameters for the dynamic driving scenario are estimated from the data in the rest periods, and the length of the fitted dataset is determined by the spectrum analysis of the load current. In addition, the unsaturated phenomenon caused by the long-term resistor-capacitor (RC network is analyzed, and the initial voltage expressions of the RC networks in the fitting functions are improved to ensure a higher model fidelity. Simulation and experiment results validated the feasibility of the developed estimation method.

  15. Development of Unavailability Estimation Method Considering Various Operating States of Dynamic Systems

    International Nuclear Information System (INIS)

    Shin, Seung Ki; Kang, Hyun Gook; Seong, Poong Hyun

    2011-01-01

    A dynamic system can be defined as a system which has a state at any given time which can be represented by a point in an appropriate state space. In order to analyze the dynamic systems, various failure mechanisms with time requirements such as the failure orders of sub-components and the changes of system states with time need to be modeled and quantitatively estimated. Since the conventional static fault tree analysis has imitations when applied to the dynamic systems, two types of dynamic fault tree methods have been developed. Dugan et al. proposed four dynamic gates to handle failure mechanisms composed of sequence-dependent events and Cepin and Mavko proposed the use of house events to handle failure mechanisms of dynamic systems which have various operating states with time. However, modeling a fault tree from a complex system is a cumbersome task even for the experts who is familiar to it, and demands a great amount of attention and caution to avoid errors. In order to model complex systems more conveniently from system block diagrams compared to the fault tree, a reliability graph with general gates (RGGG) was developed by introduction of general gates to a conventional reliability graph. The RGGG is an easy-to-modeling method as powerful as fault tree. It was also improved to analyze the dynamic failure mechanisms composed of sequence-dependent events with the addition of dynamic nodes. In this paper, unavailability assessment method for dynamic systems which have various operating states is proposed using the RGGG method. To achieve this, a novel concept of reliability matrix for the RGGG is introduced and Bayesian Networks are used for the quantification

  16. Evaluating the reliability of multi-body mechanisms: A method considering the uncertainties of dynamic performance

    International Nuclear Information System (INIS)

    Wu, Jianing; Yan, Shaoze; Zuo, Ming J.

    2016-01-01

    Mechanism reliability is defined as the ability of a certain mechanism to maintain output accuracy under specified conditions. Mechanism reliability is generally assessed by the classical direct probability method (DPM) derived from the first order second moment (FOSM) method. The DPM relies strongly on the analytical form of the dynamic solution so it is not applicable to multi-body mechanisms that have only numerical solutions. In this paper, an indirect probability model (IPM) is proposed for mechanism reliability evaluation of multi-body mechanisms. IPM combines the dynamic equation, degradation function and Kaplan–Meier estimator to evaluate mechanism reliability comprehensively. Furthermore, to reduce the amount of computation in practical applications, the IPM is simplified into the indirect probability step model (IPSM). A case study of a crank–slider mechanism with clearance is investigated. Results show that relative errors between the theoretical and experimental results of mechanism reliability are less than 5%, demonstrating the effectiveness of the proposed method. - Highlights: • An indirect probability model (IPM) is proposed for mechanism reliability evaluation. • The dynamic equation, degradation function and Kaplan–Meier estimator are used. • Then the simplified form of indirect probability model is proposed. • The experimental results agree well with the predicted results.

  17. Multiobjective CVaR Optimization Model and Solving Method for Hydrothermal System Considering Uncertain Load Demand

    Directory of Open Access Journals (Sweden)

    Zhongfu Tan

    2015-01-01

    Full Text Available In order to solve the influence of load uncertainty on hydrothermal power system operation and achieve the optimal objectives of system power generation consumption, pollutant emissions, and first-stage hydropower station storage capacity, this paper introduced CVaR method and built a multiobjective optimization model and its solving method. In the optimization model, load demand’s actual values and deviation values are regarded as random variables, scheduling objective is redefined to meet confidence level requirement and system operation constraints and loss function constraints are taken into consideration. To solve the proposed model, this paper linearized nonlinear constraints, applied fuzzy satisfaction, fuzzy entropy, and weighted multiobjective function theories to build a fuzzy entropy multiobjective CVaR model. The model is a mixed integer linear programming problem. Then, six thermal power plants and three cascade hydropower stations are taken as the hydrothermal system for numerical simulation. The results verified that multiobjective CVaR method is applicable to solve hydrothermal scheduling problems. It can better reflect risk level of the scheduling result. The fuzzy entropy satisfaction degree solving algorithm can simplify solving difficulty and get the optimum operation scheduling scheme.

  18. Calculating method on human error probabilities considering influence of management and organization

    International Nuclear Information System (INIS)

    Gao Jia; Huang Xiangrui; Shen Zupei

    1996-01-01

    This paper is concerned with how management and organizational influences can be factored into quantifying human error probabilities on risk assessments, using a three-level Influence Diagram (ID) which is originally only as a tool for construction and representation of models of decision-making trees or event trees. An analytical model of human errors causation has been set up with three influence levels, introducing a method for quantification assessments (of the ID), which can be applied into quantifying probabilities) of human errors on risk assessments, especially into the quantification of complex event trees (system) as engineering decision-making analysis. A numerical case study is provided to illustrate the approach

  19. A Quantitative Team Situation Awareness Measurement Method Considering Technical and Nontechnical Skills of Teams

    Directory of Open Access Journals (Sweden)

    Ho Bin Yim

    2016-02-01

    Full Text Available Human capabilities, such as technical/nontechnical skills, have begun to be recognized as crucial factors for nuclear safety. One of the most common ways to improve human capabilities in general is training. The nuclear industry has constantly developed and used training as a tool to increase plant efficiency and safety. An integrated training framework was suggested for one of those efforts, especially during simulation training sessions of nuclear power plant operation teams. The developed training evaluation methods are based on measuring the levels of situation awareness of teams in terms of the level of shared confidence and consensus as well as the accuracy of team situation awareness. Verification of the developed methods was conducted by analyzing the training data of real nuclear power plant operation teams. The teams that achieved higher level of shared confidence showed better performance in solving problem situations when coupled with high consensus index values. The accuracy of nuclear power plant operation teams' situation awareness was approximately the same or showed a similar trend as that of senior reactor operators' situation awareness calculated by a situation awareness accuracy index (SAAI. Teams that had higher SAAI values performed better and faster than those that had lower SAAI values.

  20. A Two-Stage Method to Determine Optimal Product Sampling considering Dynamic Potential Market

    Science.gov (United States)

    Hu, Zhineng; Lu, Wei; Han, Bing

    2015-01-01

    This paper develops an optimization model for the diffusion effects of free samples under dynamic changes in potential market based on the characteristics of independent product and presents a two-stage method to figure out the sampling level. The impact analysis of the key factors on the sampling level shows that the increase of the external coefficient or internal coefficient has a negative influence on the sampling level. And the changing rate of the potential market has no significant influence on the sampling level whereas the repeat purchase has a positive one. Using logistic analysis and regression analysis, the global sensitivity analysis gives a whole analysis of the interaction of all parameters, which provides a two-stage method to estimate the impact of the relevant parameters in the case of inaccuracy of the parameters and to be able to construct a 95% confidence interval for the predicted sampling level. Finally, the paper provides the operational steps to improve the accuracy of the parameter estimation and an innovational way to estimate the sampling level. PMID:25821847

  1. Urban Link Travel Time Prediction Based on a Gradient Boosting Method Considering Spatiotemporal Correlations

    Directory of Open Access Journals (Sweden)

    Faming Zhang

    2016-11-01

    Full Text Available The prediction of travel times is challenging because of the sparseness of real-time traffic data and the intrinsic uncertainty of travel on congested urban road networks. We propose a new gradient–boosted regression tree method to accurately predict travel times. This model accounts for spatiotemporal correlations extracted from historical and real-time traffic data for adjacent and target links. This method can deliver high prediction accuracy by combining simple regression trees with poor performance. It corrects the error found in existing models for improved prediction accuracy. Our spatiotemporal gradient–boosted regression tree model was verified in experiments. The training data were obtained from big data reflecting historic traffic conditions collected by probe vehicles in Wuhan from January to May 2014. Real-time data were extracted from 11 weeks of GPS records collected in Wuhan from 5 May 2014 to 20 July 2014. Based on these data, we predicted link travel time for the period from 21 July 2014 to 25 July 2014. Experiments showed that our proposed spatiotemporal gradient–boosted regression tree model obtained better results than gradient boosting, random forest, or autoregressive integrated moving average approaches. Furthermore, these results indicate the advantages of our model for urban link travel time prediction.

  2. A biologically relevant method for considering patterns of oceanic retention in the Southern Ocean

    Science.gov (United States)

    Mori, Mao; Corney, Stuart P.; Melbourne-Thomas, Jessica; Klocker, Andreas; Sumner, Michael; Constable, Andrew

    2017-12-01

    Many marine species have planktonic forms - either during a larval stage or throughout their lifecycle - that move passively or are strongly influenced by ocean currents. Understanding these patterns of movement is important for informing marine ecosystem management and for understanding ecological processes generally. Retention of biological particles in a particular area due to ocean currents has received less attention than transport pathways, particularly for the Southern Ocean. We present a method for modelling retention time, based on the half-life for particles in a particular region, that is relevant for biological processes. This method uses geostrophic velocities at the ocean surface, derived from 23 years of satellite altimetry data (1993-2016), to simulate the advection of passive particles during the Southern Hemisphere summer season (from December to March). We assess spatial patterns in the retention time of passive particles and evaluate the processes affecting these patterns for the Indian sector of the Southern Ocean. Our results indicate that the distribution of retention time is related to bathymetric features and the resulting ocean dynamics. Our analysis also reveals a moderate level of consistency between spatial patterns of retention time and observations of Antarctic krill (Euphausia superba) distribution.

  3. New method for determining free core nutation parameters, considering geophysical effects

    Science.gov (United States)

    Vondrák, J.; Ron, C.

    2017-08-01

    Context. In addition to the torques exerted by the Moon, Sun, and planets, changes of precession-nutation are known to be caused also by geophysical excitations. Recently studies suggest that geomagnetic jerks (GMJ) might be associated with sudden changes of phase and amplitude of free core nutation. We showed that using atmospheric and oceanic excitations with those by GMJ improves substantially the agreement with observed celestial pole offsets. Aims: Traditionally, the period Tf and quality factor Qf of the free core nutation (FCN) are derived from VLBI-based celestial pole offsets (CPO). Either direct analysis of the observed CPO, or indirect method using resonant effects of nutation terms with frequencies close to FCN, are used. The latter method is usually preferred, since it yields more accurate results. Our aim is to combine both approaches to better derive FCN parameters. Methods: We numerically integrated the part of CPO that is due to geophysical excitations for different combinations of Tf, Qf, using Brzeziński's broadband Liouville equations (Brzeziński 1994, Manuscripta geodaetica, 19, 157), and compared the results with the observed values of CPO. The values yielding the best fit were then estimated. The observed CPO, however, must be corrected for the change of nutation that is caused by the Tf, Qf values different from those used to calculate IAU 2000 model of nutation. To this end, we have used the Mathews-Herring-Buffet transfer function and applied it to the five most affected terms of nutation (with periods 365.26, 182.62, 121.75, 27.55 and 13.66 days). Results: The results, based on the CPO data in the interval 1986.0—2016.0 and excitations with three different models, are presented. We demonstrate that better results are obtained if the influence of additional excitations at GMJ epochs is added to excitations by the atmosphere and oceans. Our preferred values are Tf = 430.28 ± 0.04 mean solar days and Qf = 19 500 ± 200.

  4. AUTOMATIC GENERALIZABILITY METHOD OF URBAN DRAINAGE PIPE NETWORK CONSIDERING MULTI-FEATURES

    Directory of Open Access Journals (Sweden)

    S. Zhu

    2018-05-01

    Full Text Available Urban drainage systems are indispensable dataset for storm-flooding simulation. Given data availability and current computing power, the structure and complexity of urban drainage systems require to be simplify. However, till data, the simplify procedure mainly depend on manual operation that always leads to mistakes and lower work efficiency. This work referenced the classification methodology of road system, and proposed a conception of pipeline stroke. Further, length of pipeline, angle between two pipelines, the pipeline belonged road level and diameter of pipeline were chosen as the similarity criterion to generate the pipeline stroke. Finally, designed the automatic method to generalize drainage systems with the concern of multi-features. This technique can improve the efficiency and accuracy of the generalization of drainage systems. In addition, it is beneficial to the study of urban storm-floods.

  5. Automatic Generalizability Method of Urban Drainage Pipe Network Considering Multi-Features

    Science.gov (United States)

    Zhu, S.; Yang, Q.; Shao, J.

    2018-05-01

    Urban drainage systems are indispensable dataset for storm-flooding simulation. Given data availability and current computing power, the structure and complexity of urban drainage systems require to be simplify. However, till data, the simplify procedure mainly depend on manual operation that always leads to mistakes and lower work efficiency. This work referenced the classification methodology of road system, and proposed a conception of pipeline stroke. Further, length of pipeline, angle between two pipelines, the pipeline belonged road level and diameter of pipeline were chosen as the similarity criterion to generate the pipeline stroke. Finally, designed the automatic method to generalize drainage systems with the concern of multi-features. This technique can improve the efficiency and accuracy of the generalization of drainage systems. In addition, it is beneficial to the study of urban storm-floods.

  6. Calculation Method for Load Capacity of Urban Rail Transit Station considering Cascading Failure

    Directory of Open Access Journals (Sweden)

    Jiajun Huang

    2018-01-01

    Full Text Available The load capacity of urban rail transit station is of great significance to provide reference in station design and operation management. However, it is difficult to carry out quantitative calculation quickly and accurately due to the complex interaction among passenger behaviors, facility layout, and the limit capacity of single facility. In this paper, the association network of facilities is set up based on the analysis of passenger service chain in station. Then the concept of cascading failure is introduced to the dynamic calculation model of load capacity, which is established on the user-equilibrium allocation model. The solution algorithm is optimized with node attack strategy of complex network to effectively reduce the computational complexity. Finally, a case study of Lujiabang Road Station in Shanghai is carried out and compared with the simulation results of StaPass, verifying the feasibility of this approach. The proposed method can not only search for the bottleneck of capacity, but also help to trace the loading variation of facilities network in different scenarios, providing theoretical supports on passenger flow organization.

  7. 41 CFR 301-70.101 - What factors must we consider in determining which method of transportation results in the...

    Science.gov (United States)

    2010-07-01

    ... with the nature and purpose of the duties of the employee requiring such travel.” (b) Travel by common carrier (air, rail, bus) is considered the most advantageous method to perform official travel. Other methods of transportation may be authorized as advantageous only when the use of common carrier...

  8. METHOD OF STRATEGIC PLANNING AND MANAGEMENT DECISION-MAKING CONSIDERING THE LIFE CYCLE THEORY

    Directory of Open Access Journals (Sweden)

    Tetiana Kniazieva

    2017-12-01

    are made. Results of the survey are to substantiate the methodology of strategic planning under conditions of external environment uncertainty with the consideration of the life cycle theory. Practical implications: the possibilities of using life-cycle models allow: 1. reasonably predicting sales and plan production program; 2. determining the basic strategies at different stages of development; 3. determining the sequence of stages of enterprise development; 4. ensuring harmonious interaction of organizational characteristics with the external environment factors that influence the process of organizational development. Increasing the sustainability of the organization’s development can be achieved by re-establishment of dynamic changes in the plan in terms of using effective methods for forecasting with the consideration of the life cycle theory. It is necessary to take into account the interconnection between all levels of life cycles: industry, technology, enterprises, product; ensuring the competitive advantage of the organization. Using the theory of optimal solutions making in uncertain conditions under the analysis of long-term projects allows transferring qualitative factors into quantitative indicators that can be used in the future to bring investment projects to the same kind and choose the best. In conditions of increased uncertainty of the external environment, it is necessary to develop the theory of enterprise management, taking into account its life cycle, as well as the life cycle of its separate elements and processes at all levels. Combination of strategic management with the life cycles theory will increase the objectivity and effectiveness of taken management decisions. The accounting of the organization life cycles in strategic planning allows choosing an effective strategy.

  9. A method for selection of spent nuclear fuel (SNF) transportation route considering socioeconomic cost based on contingent valuation method (CVM)

    International Nuclear Information System (INIS)

    Kim, Young Sik

    2008-02-01

    A transportation of SNF may cause an additional radiation exposure to human beings. It means that the radiological risk should be estimated and managed quantitatively for the public who live near the shipments route. Before the SNF transportation is performed, the route selection is concluded based on the radiological risk estimated with RADTRAN code in existing method generally. It means the existing method for route selection is based only on the radiological health risk but there are not only the impacts related to the radiological health risk but also the socioeconomic impacts related to the cost. In this study, a new method and its numerical formula for route selection on transporting SNF is proposed based on cost estimation because there are several costs in transporting SNF. The total cost consists of radiological health cost, transportation cost, and socioeconomic cost. Each cost is defined properly to the characteristics of SNF transportation and many coefficients and variables describing the meaning of each cost are obtained or estimated through many surveys. Especially to get the socioeconomic cost, contingent valuation method (CVM) is used with a questionnaire. The socioeconomic cost estimation is the most important part of the total cost originated from transporting SNF because it is a very dominant cost in the total cost. The route selection regarding SNF transportation can be supported with the proposed method reasonably and unnecessary or exhausting controversies about the shipments could be avoided

  10. Accurate facade feature extraction method for buildings from three-dimensional point cloud data considering structural information

    Science.gov (United States)

    Wang, Yongzhi; Ma, Yuqing; Zhu, A.-xing; Zhao, Hui; Liao, Lixia

    2018-05-01

    Facade features represent segmentations of building surfaces and can serve as a building framework. Extracting facade features from three-dimensional (3D) point cloud data (3D PCD) is an efficient method for 3D building modeling. By combining the advantages of 3D PCD and two-dimensional optical images, this study describes the creation of a highly accurate building facade feature extraction method from 3D PCD with a focus on structural information. The new extraction method involves three major steps: image feature extraction, exploration of the mapping method between the image features and 3D PCD, and optimization of the initial 3D PCD facade features considering structural information. Results show that the new method can extract the 3D PCD facade features of buildings more accurately and continuously. The new method is validated using a case study. In addition, the effectiveness of the new method is demonstrated by comparing it with the range image-extraction method and the optical image-extraction method in the absence of structural information. The 3D PCD facade features extracted by the new method can be applied in many fields, such as 3D building modeling and building information modeling.

  11. A study on evaluation and analytical methods for groundwater flow with considering sea/fresh-water boundary. 1

    International Nuclear Information System (INIS)

    Anezaki, S.

    1998-03-01

    Sea/fresh-water boundary caused by density and concentration balance of sea-water and fresh-water is an important item for groundwater flow evaluation in deep underground near the coast. Also, in order to evaluate groundwater quality, it is important to understand the characteristics of sea/fresh-water boundary, for example boundary shape, salt distribution. In order to establish the evaluation and analytical methods for groundwater flow with considering sea/fresh-water boundary, we investigated the following items in this study. (1) Literature survey and data collection. (2) Investigation of analytical methods. (3) Planning of further study. (author). 78 refs

  12. Incorporation of Collision Probability Method in STREAM to Consider Non-uniform Material Composition in Fuel Subregions

    International Nuclear Information System (INIS)

    Choi, Sooyoung; Choe, Jiwon; Lee, Deokjung

    2016-01-01

    STREAM uses a pin-based slowing-down method (PSM) which solves pointwise energy slowing-down problems with sub-divided fuel pellet, and shows a great performance in calculating effective cross-section (XS). Various issues in the conventional resonance treatment methods (i.e., approximations on resonance scattering source, resonance interference effect, and intrapellet self-shielding effect) were successfully resolved by PSM. PSM assumes that a fuel rod has a uniform material composition and temperature even though PSM calculates spatially dependent effective XSs of fuel subregions. When the depletion calculation or thermal/hydraulic (T/H) coupling are performed with sub-divided material meshes, each subregion has its own material condition depending on position. It was reported that the treatment of distributed temperature is important to calculate an accurate fuel temperature coefficient (FTC). In order to avoid the approximation in PSM, the collision probability method (CPM) has been incorporated as a calculation option. The resonance treatment method, PSM, used in the transport code STREAM has been enhanced to accurately consider a non-uniform material condition. The method incorporates CPM in computing collision probability of isolated fuel pin. From numerical tests with pin-cell problems, STREAM with the method showed very accurate multiplication factor and FTC results less than 83 pcm and 1.43 % differences from the references, respectively. The original PSM showed larger differences than the proposed method but still has a high accuracy

  13. Incorporation of Collision Probability Method in STREAM to Consider Non-uniform Material Composition in Fuel Subregions

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Sooyoung; Choe, Jiwon; Lee, Deokjung [UNIST, Ulsan (Korea, Republic of)

    2016-10-15

    STREAM uses a pin-based slowing-down method (PSM) which solves pointwise energy slowing-down problems with sub-divided fuel pellet, and shows a great performance in calculating effective cross-section (XS). Various issues in the conventional resonance treatment methods (i.e., approximations on resonance scattering source, resonance interference effect, and intrapellet self-shielding effect) were successfully resolved by PSM. PSM assumes that a fuel rod has a uniform material composition and temperature even though PSM calculates spatially dependent effective XSs of fuel subregions. When the depletion calculation or thermal/hydraulic (T/H) coupling are performed with sub-divided material meshes, each subregion has its own material condition depending on position. It was reported that the treatment of distributed temperature is important to calculate an accurate fuel temperature coefficient (FTC). In order to avoid the approximation in PSM, the collision probability method (CPM) has been incorporated as a calculation option. The resonance treatment method, PSM, used in the transport code STREAM has been enhanced to accurately consider a non-uniform material condition. The method incorporates CPM in computing collision probability of isolated fuel pin. From numerical tests with pin-cell problems, STREAM with the method showed very accurate multiplication factor and FTC results less than 83 pcm and 1.43 % differences from the references, respectively. The original PSM showed larger differences than the proposed method but still has a high accuracy.

  14. Allocation of ESS by interval optimization method considering impact of ship swinging on hybrid PV/diesel ship power system

    International Nuclear Information System (INIS)

    Wen, Shuli; Lan, Hai; Hong, Ying-Yi; Yu, David C.; Zhang, Lijun; Cheng, Peng

    2016-01-01

    Highlights: • An uncertainty model of PV generation on board is developed based on the experiments. • The moving and swinging of the ship are considered in the optimal ESS sizing problem. • Optimal sizing of ESS in a hybrid PV/diesel/ESS ship power system is gained by the interval optimization method. • Different cases were studied to show the significance of the proposed method considering the swinging effects on the cost. - Abstract: Owing to low efficiency of traditional ships and the serious environmental pollution that they cause, the use of solar energy and an energy storage system (ESS) in a ship’s power system is increasingly attracting attention. However, the swinging of a ship raises crucial challenges in designing an optimal system for a large oil tanker ship, which are associated with uncertainties in solar energy. In this study, a series of experiments are performed to investigate the characteristics of a photovoltaic (PV) system on a moving ship. Based on the experimental results, an interval uncertainty model of on-board PV generation is established, which considers the effect of the swinging of the ship. Due to the power balance equations, the outputs of the diesel generator and the ESS on a large oil tanker are also modeled using interval variables. An interval optimization method is developed to determine the optimal size of the ESS in this hybrid ship power system to reduce the fuel cost, capital cost of the ESS, and emissions of greenhouse gases. Variations of the ship load are analyzed using a new method, taking five operating conditions into account. Several cases are compared in detail to demonstrate the effectiveness of the proposed algorithm.

  15. A new hybrid GA-PSO method for solving multi-period inventory routing problem with considering financial decisions

    Directory of Open Access Journals (Sweden)

    Masoud Rabbani

    2013-09-01

    Full Text Available Integration of various logistical components in supply chain management, such as transportation, inventory control and facility location are becoming common practice to avoid sub-optimization in nowadays’ competitive environment. The integration of transportation and inventory decisions is known as inventory routing problem (IRP in the literature. The problem aims to determine the delivery quantity for each customer and the network routes to be used in each period, so that the total inventory and transportation costs are to be minimized. On the contrary of conventional IRP that each retailer can only provide its demand from the supplier, in this paper, a new multi-period, multi-item IRP model with considering lateral trans-shipment, back-log and financial decisions is proposed as a business model in a distinct organization. The main purpose of this paper is applying an applicable inventory routing model with considering real world setting and solving it with an appropriate method.

  16. A Maximum Power Transfer Tracking Method for WPT Systems with Coupling Coefficient Identification Considering Two-Value Problem

    Directory of Open Access Journals (Sweden)

    Xin Dai

    2017-10-01

    Full Text Available Maximum power transfer tracking (MPTT is meant to track the maximum power point during the system operation of wireless power transfer (WPT systems. Traditionally, MPTT is achieved by impedance matching at the secondary side when the load resistance is varied. However, due to a loosely coupling characteristic, the variation of coupling coefficient will certainly affect the performance of impedance matching, therefore MPTT will fail accordingly. This paper presents an identification method of coupling coefficient for MPTT in WPT systems. Especially, the two-value issue during the identification is considered. The identification approach is easy to implement because it does not require additional circuit. Furthermore, MPTT is easy to realize because only two easily measured DC parameters are needed. The detailed identification procedure corresponding to the two-value issue and the maximum power transfer tracking process are presented, and both the simulation analysis and experimental results verified the identification method and MPTT.

  17. A fluid-solid coupling simulation method for convection heat transfer coefficient considering the under-vehicle condition

    Science.gov (United States)

    Tian, C.; Weng, J.; Liu, Y.

    2017-11-01

    The convection heat transfer coefficient is one of the evaluation indexes of the brake disc performance. The method used in this paper to calculate the convection heat transfer coefficient is a fluid-solid coupling simulation method, because the calculation results through the empirical formula method have great differences. The model, including a brake disc, a car body, a bogie and flow field, was built, meshed and simulated in the software FLUENT. The calculation models were K-epsilon Standard model and Energy model. The working condition of the brake disc was considered. The coefficient of various parts can be obtained through the method in this paper. The simulation result shows that, under 160 km/h speed, the radiating ribs have the maximum convection heat transfer coefficient and the value is 129.6W/(m2·K), the average coefficient of the whole disc is 100.4W/(m2·K), the windward of ribs is positive-pressure area and the leeward of ribs is negative-pressure area, the maximum pressure is 2663.53Pa.

  18. A reliability design method for a lithium-ion battery pack considering the thermal disequilibrium in electric vehicles

    Science.gov (United States)

    Xia, Quan; Wang, Zili; Ren, Yi; Sun, Bo; Yang, Dezhen; Feng, Qiang

    2018-05-01

    With the rapid development of lithium-ion battery technology in the electric vehicle (EV) industry, the lifetime of the battery cell increases substantially; however, the reliability of the battery pack is still inadequate. Because of the complexity of the battery pack, a reliability design method for a lithium-ion battery pack considering the thermal disequilibrium is proposed in this paper based on cell redundancy. Based on this method, a three-dimensional electric-thermal-flow-coupled model, a stochastic degradation model of cells under field dynamic conditions and a multi-state system reliability model of a battery pack are established. The relationships between the multi-physics coupling model, the degradation model and the system reliability model are first constructed to analyze the reliability of the battery pack and followed by analysis examples with different redundancy strategies. By comparing the reliability of battery packs of different redundant cell numbers and configurations, several conclusions for the redundancy strategy are obtained. More notably, the reliability does not monotonically increase with the number of redundant cells for the thermal disequilibrium effects. In this work, the reliability of a 6 × 5 parallel-series configuration is the optimal system structure. In addition, the effect of the cell arrangement and cooling conditions are investigated.

  19. Minarchy Considered

    Directory of Open Access Journals (Sweden)

    Richard A Garner

    2009-09-01

    Full Text Available Whilst some defenders of the minimal, limited state or government hold that the state is “a necessary evil,” others would consider that this claim that the state is evil concedes too much ground to anarchists. In this article I intend to discuss the views of some who believe that government is a good thing, and their arguments for supporting this position. My main conclusions will be that, in each case, the proponents of a minimal state, or “minarchy,” fail to justify as much as what they call government, and so fail to oppose anarchism, or absences of what they call government.

  20. A novel method for identification of lithium-ion battery equivalent circuit model parameters considering electrochemical properties

    Science.gov (United States)

    Zhang, Xi; Lu, Jinling; Yuan, Shifei; Yang, Jun; Zhou, Xuan

    2017-03-01

    This paper proposes a novel parameter identification method for the lithium-ion (Li-ion) battery equivalent circuit model (ECM) considering the electrochemical properties. An improved pseudo two-dimension (P2D) model is established on basis of partial differential equations (PDEs), since the electrolyte potential is simplified from the nonlinear to linear expression while terminal voltage can be divided into the electrolyte potential, open circuit voltage (OCV), overpotential of electrodes, internal resistance drop, and so on. The model order reduction process is implemented by the simplification of the PDEs using the Laplace transform, inverse Laplace transform, Pade approximation, etc. A unified second order transfer function between cell voltage and current is obtained for the comparability with that of ECM. The final objective is to obtain the relationship between the ECM resistances/capacitances and electrochemical parameters such that in various conditions, ECM precision could be improved regarding integration of battery interior properties for further applications, e.g., SOC estimation. Finally simulation and experimental results prove the correctness and validity of the proposed methodology.

  1. Calculating the wind energy input to a system using a spatially explicit method that considers atmospheric stability

    Science.gov (United States)

    Atmospheric stability has a major effect in determining the wind energy doing work in the atmospheric boundary layer (ABL); however, it is seldom considered in determining this value in emergy analyses. One reason that atmospheric stability is not usually considered is that a sui...

  2. Tsunami risk assessment for facility group over a wide area using inundation assessment method considering energy conservation law

    International Nuclear Information System (INIS)

    Fukutani, Yo; Imamura, Fumihiko; Tokunaga, Takeshi; Sato, Ichiro

    2015-01-01

    We propose a quantitative evaluation method of overall tsunami risk that the entire facility group over a wide area holds. We considerably reduced the calculation cost for tsunami inundation depth by adopting the evaluation method using energy conservation law as compared with the evaluation method using non-linear long wave equation. For financial institutions such as banks and insurance companies with contractors over a wide area and business companies with multiple their assets and facilities in various places, the proposed evaluation method in this study could be a useful approach to implement their risk-based management decisions for tsunami risk. (author)

  3. Risk Assessment for Distribution Systems Using an Improved PEM-Based Method Considering Wind and Photovoltaic Power Distribution

    Directory of Open Access Journals (Sweden)

    Qingwu Gong

    2017-03-01

    Full Text Available The intermittency and variability of permeated distributed generators (DGs could cause many critical security and economy risks to distribution systems. This paper applied a certain mathematical distribution to imitate the output variability and uncertainty of DGs. Then, four risk indices—EENS (expected energy not supplied, PLC (probability of load curtailment, EFLC (expected frequency of load curtailment, and SI (severity index—were established to reflect the system risk level of the distribution system. For the certain mathematical distribution of the DGs’ output power, an improved PEM (point estimate method-based method was proposed to calculate these four system risk indices. In this improved PEM-based method, an enumeration method was used to list the states of distribution systems, and an improved PEM was developed to deal with the uncertainties of DGs, and the value of load curtailment in distribution systems was calculated by an optimal power flow algorithm. Finally, the effectiveness and advantages of this proposed PEM-based method for distribution system assessment were verified by testing a modified IEEE 30-bus system. Simulation results have shown that this proposed PEM-based method has a high computational accuracy and highly reduced computational costs compared with other risk assessment methods and is very effective for risk assessments.

  4. Fine Output Voltage Control Method considering Time-Delay of Digital Inverter System for X-ray Computed Tomography

    Science.gov (United States)

    Shibata, Junji; Kaneko, Kazuhide; Ohishi, Kiyoshi; Ando, Itaru; Ogawa, Mina; Takano, Hiroshi

    This paper proposes a new output voltage control for an inverter system, which has time-delay and nonlinear load. In the next generation X-ray computed tomography of a medical device (X-ray CT) that uses the contactless power transfer method, the feedback signal often contains time-delay due to AD/DA conversion and error detection/correction time. When the PID controller of the inverter system is received the adverse effects of the time-delay, the controller often has an overshoot and a oscillated response. In order to overcome this problem, this paper proposes a compensation method based on the Smith predictor for an inverter system having a time-delay and the nonlinear loads which are the diode bridge rectifier and X-ray tube. The proposed compensation method consists of the hybrid Smith predictor system based on an equivalent analog circuit and DSP. The experimental results confirm the validity of the proposed system.

  5. Development of Optimization method about Capital Structure and Senior-Sub Structure by considering Project-Risk

    Science.gov (United States)

    Kawamoto, Shigeru; Ikeda, Yuichi; Fukui, Chihiro; Tateshita, Fumihiko

    Private finance initiative is a business scheme that materializes social infrastructure and public services by utilizing private-sector resources. In this paper we propose a new method to optimize capital structure, which is the ratio of capital to debt, and senior-sub structure, which is the ratio of senior loan to subordinated loan, for private finance initiative. We make the quantitative analysis of a private finance initiative's project using the proposed method. We analyze trade-off structure between risk and return in the project, and optimize capital structure and senior-sub structure. The method we propose helps to improve financial stability of the project, and to make a fund raising plan that is expected to be reasonable for project sponsor and moneylender.

  6. An ultrasound-based liquid pressure measurement method in small diameter pipelines considering the installation and temperature.

    Science.gov (United States)

    Li, Xue; Song, Zhengxiang

    2015-04-09

    Liquid pressure is a key parameter for detecting and judging faults in hydraulic mechanisms, but traditional measurement methods have many deficiencies. An effective non-intrusive method using an ultrasound-based technique to measure liquid pressure in small diameter (less than 15 mm) pipelines is presented in this paper. The proposed method is based on the principle that the transmission speed of an ultrasonic wave in a Kneser liquid correlates with liquid pressure. Liquid pressure was calculated using the variation of ultrasonic propagation time in a liquid under different pressures: 0 Pa and X Pa. In this research the time difference was obtained by an electrical processing approach and was accurately measured to the nanosecond level through a high-resolution time measurement module. Because installation differences and liquid temperatures could influence the measurement accuracy, a special type of circuit called automatic gain control (AGC) circuit and a new back propagation network (BPN) model accounting for liquid temperature were employed to improve the measurement results. The corresponding pressure values were finally obtained by utilizing the relationship between time difference, transient temperature and liquid pressure. An experimental pressure measurement platform was built and the experimental results confirm that the proposed method has good measurement accuracy.

  7. Evaluation of a new solid boundary implementation in the lattice Boltzmann method for porous media considering permeability and apparent slip.

    Science.gov (United States)

    Moqtaderi, Hamed; Esfahanian, Vahid

    2011-06-13

    The accuracy of solid wall treatment in the lattice Boltzmann method (LBM) simulation of porous structures affects different hydraulic parameters including integral properties, such as permeability, or local phenomena, such as apparent slip. Based on an analysis of the advantages and disadvantages of the current methods, a new technique is introduced for exact boundary extraction from binary representation. Using this technique, the LBM model can simultaneously benefit from the advantages of existing approaches, i.e. the real micro-/nanostructure obtained with X-ray computed tomography, and a reduction in the resolution requirement. To evaluate the technique, permeability and slip length on the solid walls are investigated for a porous gas diffusion layer. The results show acceptable accuracy improvement balanced with computational costs.

  8. Problems of methodics: Are they a reason for our continuing to consider trends on the basis of the status quo?

    International Nuclear Information System (INIS)

    Jochem, E.

    1989-01-01

    The paper looks into the following questions: Differences of energy demand between the developments of reference and the phaseout variant; technologically oriented estimation methods - higher forecasting certainty for the 90s and cause of estimating errors in the next century; inadequate consideration of the structural change of industry - danger of overrating specific energy demand; varying consideration of price reactions in quantiative analyses - scientifically motivated precaution as a factor paving the way for faulty forecasts. (orig./HSCH) [de

  9. Should the mass of a nanoferrite sample prepared by autocombustion method be considered as a realistic preparation parameter?

    Energy Technology Data Exchange (ETDEWEB)

    Wahba, Adel Maher, E-mail: adel.mousa@f-eng.tanta.edu.eg [Department of Engineering Physics and Mathematics, Faculty of Engineering, Tanta University (Egypt); Mohamed, Mohamed Bakr [Ain shams University, Faculty of Science, Physics Department, Cairo (Egypt)

    2017-02-15

    Detectable variations in structural, elastic and magnetic properties have been reported depending on the mass of the cobalt nanoferrite sample prepared by citrate autocombustion method. Heat released during the autocombustion process and its duration are directly proportional to the mass to be prepared, and is thus expected to affect both the crystallite size and the cation distribution giving rise to the reported variations in microstrain, magnetization, and coercivity. Formation of a pure spinel phase has been validated using X-ray diffraction patterns (XRD) and Fourier-transform infrared (FTIR) spectra. Crystallite sizes obtained from Williamson-Hall (W-H) method range from 28–87 nm, being further supported by images of high-resolution transmission electron microscope (HRTEM). Saturation magnetization and coercivity deduced from M-H hysteresis loops show a clear correlation with the cation distribution, which was proposed on the basis of experimentally obtained data of XRD, VSM, and IR. Elastic parameters have been estimated using the cation distribution and FTIR data, with a resulting trend quite opposite to that of the lattice parameter. - Highlights: • Samples with different masses of CoFe{sub 2}O{sub 4} were prepared by autocombustion method. • XRD and IR data confirmed a pure spinel cubic structure for all samples. • Structural and magnetic properties show detectable changes with the mass prepared. • Cation distribution was suggested from experimental data of XRD, IR, and M-H loops.

  10. METHOD OF THE DRIVE POWER DETERMINATION OF THE MECHANISMS OF THE BRIDGE CRANE MOVEMENT CONSIDERING THE ROLLING FRICTION

    Directory of Open Access Journals (Sweden)

    V. M. Bohomaz

    2015-08-01

    Full Text Available Purpose. The value of drive resistance to its movement is the main parameter at calculating the drive power of bridge crane. The value of the wheel rolling friction on the rails is one of the important parts of the resistance to movement. It is necessary to determine the dependence of static (dynamic quantities of resistance to the bridge crane movement on a straight section of the track from the position of the bogie in the span, and explore the influence of the wheel flanges resistance for wear. Methodology. Using the analytical dependences for determining the rolling friction coefficient, that depends on the size of the half-width of the contact between the wheel and rail, the improved method for calculating the required drive power of the crane was proposed. Findings. With the proposed method of power calculation the characteristic curve of the crane wheel loads, the coefficient of rolling friction of the wheels and the crane resistance to movement from the position of the bogie on span were built. In the result of graphs analysis it was found that the engine power, obtained by the proposed method is higher than the recommended by the existing standards. The more precise formula for determining the total coefficient of sliding friction that takes into account the friction of wheel flanges on the rail is given. The characteristic curves of such coefficient of friction and the total resistance to movement of the position of the crane bogie were built. Originality. The scientists proposed an improved method of determining the required engine power of bridge crane, which takes into account the effect of rolling friction of the wheels on the rails and the bogie in the span. The improved formula for determining the coefficient of friction that takes into account the friction wheel flanges of the rail was given. The characteristic curve of this coefficient of friction and the total resistance movement of crane from the position of the crane bogie

  11. Stress and multiple sclerosis: A systematic review considering potential moderating and mediating factors and methods of assessing stress.

    Science.gov (United States)

    Briones-Buixassa, Laia; Milà, Raimon; Mª Aragonès, Josep; Bufill, Enric; Olaya, Beatriz; Arrufat, Francesc Xavier

    2015-07-01

    Research about the effects of stress on multiple sclerosis has yielded contradictory results. This study aims to systematically review the evidence focusing on two possible causes: the role of stress assessment and potential moderating and mediating factors. The Web of Knowledge (MEDLINE and Web of Science), Scopus, and PsycINFO databases were searched for relevant articles published from 1900 through December 2014 using the terms "stress*" AND "multiple sclerosis." Twenty-three articles were included. Studies focused on the effect of stress on multiple sclerosis onset ( n  = 9) were mostly retrospective, and semi-structured interviews and scales yielded the most consistent associations. Studies focused on multiple sclerosis progression ( n  = 14) were mostly prospective, and self-reported diaries yielded the most consistent results. The most important modifying factors were stressor duration, severity, and frequency; cardiovascular reactivity and heart rate; and social support and escitalopram intake. Future studies should consider the use of prospective design with self-reported evaluations and the study of moderators and mediators related to amount of stress and autonomic nervous system reactivity to determine the effects of stress on multiple sclerosis.

  12. Stress and multiple sclerosis: A systematic review considering potential moderating and mediating factors and methods of assessing stress

    Directory of Open Access Journals (Sweden)

    Laia Briones-Buixassa

    2015-11-01

    Full Text Available Research about the effects of stress on multiple sclerosis has yielded contradictory results. This study aims to systematically review the evidence focusing on two possible causes: the role of stress assessment and potential moderating and mediating factors. The Web of Knowledge (MEDLINE and Web of Science, Scopus, and PsycINFO databases were searched for relevant articles published from 1900 through December 2014 using the terms “stress*” AND “multiple sclerosis.” Twenty-three articles were included. Studies focused on the effect of stress on multiple sclerosis onset ( n  = 9 were mostly retrospective, and semi-structured interviews and scales yielded the most consistent associations. Studies focused on multiple sclerosis progression ( n  = 14 were mostly prospective, and self-reported diaries yielded the most consistent results. The most important modifying factors were stressor duration, severity, and frequency; cardiovascular reactivity and heart rate; and social support and escitalopram intake. Future studies should consider the use of prospective design with self-reported evaluations and the study of moderators and mediators related to amount of stress and autonomic nervous system reactivity to determine the effects of stress on multiple sclerosis.

  13. Multidimensional method for the determination of control power considering uncertainties; Multidimensionales Verfahren zur Bestimmung des Regelleistungsbedarfes unter Beruecksichtigung von Unsicherheiten

    Energy Technology Data Exchange (ETDEWEB)

    Kays, Jan; Schwippe, Johannes; Waniek, Daniel; Rehtanz, Christian [Technische Univ. Dortmund (Germany). Lehrstuhl fuer Energiesysteme und Energiewirtschaft

    2010-12-15

    One of the most crucial constraints in operation of electrical power supply systems is the permanent balance between generation and load. Reserve power is held ready to be able to keep this balance also in case of the occurrence of unpredictable events like power plant outages or inevitable deviations of power injections from their predicted values. At this, the allocation of operating reserves is in the field of conflict between level of reliability and cost effectiveness. The amount of reserve generation capacity required in a control area heavily depends on prediction quality which constitutes the need for high quality predictions. This article is about the influence of prediction quality on the amount of reserve generation capacity required in a control area. The algorithms for the assessment of required reserve generation capacity known from literature use the variation calculus technique to account for the aforementioned unpredictable events and prediction errors. In this article, an extension to a convolution-based method is presented in which the uncertainties of the predictions are expressed using intervals. Each parameter is represented by an independent dimension, assuming statistical independence among them. This allows the distinct analysis of each parameter's influence on the amount of required reserve generation capacity. In addition, two methods for the visualization of the multi-dimensional results are presented, allowing a comprehensive analysis of the parameters' influences. Standard distribution functions are used to represent the parameters for the simulation and the results are shown as probability density functions of possible imbalances. Based on forecasts of the development of conventional power plants and regenerative generation in the years 2020, 2030 and 2040, the required control power of the future German transmission system is calculated. Influences and dependencies are identified with the extended convolution-based method

  14. A new lattice hydrodynamic model based on control method considering the flux change rate and delay feedback signal

    Science.gov (United States)

    Qin, Shunda; Ge, Hongxia; Cheng, Rongjun

    2018-02-01

    In this paper, a new lattice hydrodynamic model is proposed by taking delay feedback and flux change rate effect into account in a single lane. The linear stability condition of the new model is derived by control theory. By using the nonlinear analysis method, the mKDV equation near the critical point is deduced to describe the traffic congestion. Numerical simulations are carried out to demonstrate the advantage of the new model in suppressing traffic jam with the consideration of flux change rate effect in delay feedback model.

  15. Evaluation of the Reference Numerical Parameters of the Monthly Method in ISO 13790 Considering S/V Ratio

    Directory of Open Access Journals (Sweden)

    Hee-Jeong Kwak

    2015-01-01

    Full Text Available Many studies have investigated the accuracy of the numerical parameters in the application of the quasi steady-state calculation method. The aim of this study is to derive the reference numerical parameters of the ISO 13790 monthly method by reflecting the surface-to-volume (S/V ratio and the characteristics of the structures. The calculation process was established, and the parameters necessary to derive the reference numerical parameters were calculated based on the input data prepared for the established calculation processes. The reference numerical parameters were then derived through regression analyses of the calculated parameters and the time constant. The parameters obtained from an apartment building and the parameters of the international standard were both applied to the Passive House Planning Package (PHPP and EnergyPlus programs, and the results were analyzed in order to evaluate the validity of the results. The analysis revealed that the calculation results based on the parameters derived from this study yielded lower error rates than those based on the default parameters in ISO 13790. However, the differences were shown to be negligible in the case of high heat capacity.

  16. Three-Dimensional Elasticity Solutions for Sound Radiation of Functionally Graded Materials Plates considering State Space Method

    Directory of Open Access Journals (Sweden)

    Tieliang Yang

    2016-01-01

    Full Text Available This paper presents an analytical study for sound radiation of functionally graded materials (FGM plate based on the three-dimensional theory of elasticity. The FGM plate is a mixture of metal and ceramic, and its material properties are assumed to have smooth and continuous variation in the thickness direction according to a power-law distribution in terms of volume fractions of the constituents. Based on the three-dimensional theory of elasticity and state space method, the governing equations with variable coefficients of the FGM plate are derived. The sound radiation of the vibration plate is calculated with Rayleigh integral. Comparisons of the present results with those of solutions in the available literature are made and good agreements are achieved. Finally, some parametric studies are carried out to investigate the sound radiation properties of FGM plates.

  17. Emissions from residential combustion considering end-uses and spatial constraints: Part I, methods and spatial distribution

    Science.gov (United States)

    Winijkul, Ekbordin; Fierce, Laura; Bond, Tami C.

    2016-01-01

    This study describes a framework to attribute national-level atmospheric emissions in the year 2010 from the residential sector, one of the largest energy-related sources of aerosol emissions. We place special emphasis on end-uses, dividing usage into cooking, heating, lighting, and others. This study covers regions where solid biomass fuel provides more than 50% of total residential energy: Latin America, Africa, and Asia (5.2 billion people in 2010). Using nightlight data and population density, we classify five land types: urban, electrified rural with forest access, electrified rural without forest access, non-electrified rural with forest access, and non-electrified rural without forest access. We then apportion national-level residential fuel consumption among all land-types and end-uses, and assign end-use technologies to each combination. The resulting calculation gives spatially-distributed emissions of particulate matter, black carbon, organic carbon, nitrogen oxides, methane, non-methane hydrocarbons, carbon monoxide, and carbon dioxide. Within this study region, about 13% of the energy is consumed in urban areas, and 45% in non-urban land near forests. About half the energy is consumed in land without access to electricity. Cooking accounts for 54% of the consumption, heating for 9%, and lighting only 2%, with unidentified uses making up the remainder. Because biofuel use is assumed to occur preferentially where wood is accessible and electricity is not, our method shifts emissions to land types without electrification, compared with previous methods. The framework developed here is an important first step in acknowledging the role of household needs and local constraints in choosing energy provision. Although data and relationships described here need further development, this structure offers a more physically-based understanding of residential energy choices and, ultimately, opportunities for emission reduction.

  18. Application of a Continuous Particle Swarm Optimization (CPSO for the Optimal Coordination of Overcurrent Relays Considering a Penalty Method

    Directory of Open Access Journals (Sweden)

    Abdul Wadood

    2018-04-01

    Full Text Available In an electrical power system, the coordination of the overcurrent relays plays an important role in protecting the electrical system by providing primary as well as backup protection. To reduce power outages, the coordination between these relays should be kept at the optimum value to minimize the total operating time and ensure that the least damage occurs under fault conditions. It is also imperative to ensure that the relay setting does not create an unintentional operation and consecutive sympathy trips. In a power system protection coordination problem, the objective function to be optimized is the sum of the total operating time of all main relays. In this paper, the coordination of overcurrent relays in a ring fed distribution system is formulated as an optimization problem. Coordination is performed using proposed continuous particle swarm optimization. In order to enhance and improve the quality of this solution a local search algorithm (LSA is implanted into the original particle swarm algorithm (PSO and, in addition to the constraints, these are amalgamated into the fitness function via the penalty method. The results achieved from the continuous particle swarm optimization algorithm (CPSO are compared with other evolutionary optimization algorithms (EA and this comparison showed that the proposed scheme is competent in dealing with the relevant problems. From further analyzing the obtained results, it was found that the continuous particle swarm approach provides the most globally optimum solution.

  19. Evaluation on radioactive waste disposal amount of Kori Unit 1 reactor vessel considering cutting and packaging methods

    International Nuclear Information System (INIS)

    Choi, Yu Jong; Lee, Seong Cheol; Kim, Chang Lak

    2016-01-01

    Decommissioning of nuclear power plants has become a big issue in South Korea as some of the nuclear power plants in operation including Kori unit 1 and Wolsung unit 1 are getting old. Recently, Wolsung unit 1 received permission to continue operation while Kori unit 1 will shut down permanently in June 2017. With the consideration of segmentation method and disposal containers, this paper evaluated final disposal amount of radioactive waste generated from decommissioning of the reactor pressure vessel in Kori unit 1 which will be decommissioned as the first in South Korea. The evaluation results indicated that the final disposal amount from the top and bottom heads of the reactor pressure vessel with hemisphere shape decreased as they were cut in smaller more effectively than the cylindrical part of the reactor pressure vessel. It was also investigated that 200 L and 320 L radioactive waste disposal containers used in Kyung-Ju disposal facility had low payload efficiency because of loading weight limitation

  20. A structured and systematic model-based development method for automotive systems, considering the OEM/supplier interface

    International Nuclear Information System (INIS)

    Beckers, Kristian; Côté, Isabelle; Frese, Thomas; Hatebur, Denis; Heisel, Maritta

    2017-01-01

    The released ISO 26262 standard for automotive systems requires to create a hazard analysis and risk assessment and to create safety goals, to break down these safety goals into functional safety requirements in the functional safety concept, to specify technical safety requirements in the safety requirements specification, and to perform several validation and verification activities. Experience shows that the definition of technical safety requirements and the planning and execution of validation and verification activities has to be done jointly by OEMs and suppliers. In this paper, we present a structured and model-based safety development approach for automotive systems. The different steps are based on Jackson's requirement engineering. The elements are represented by UML notation extended with stereotypes. The UML model enables a rigorous validation of several constraints. We make use of the results of previously published work to be able to focus on the OEM/supplier interface. We illustrate our method using a three-wheeled-tilting control system (3WTC) as running example and case study. - Highlights: • Break down functional safety requirements into technical safety requirements. • Perform a hardware metric breakdown. • Ensure completeness of the requirements by using tables with predefined cells. • Define the interface to the suppliers and address functional safety.

  1. Frequency Analysis of Wing-Rotor System Considering Flexibility in Capsule Based on High-Accurate Method

    Science.gov (United States)

    Zhang, Xiayang; Zhu, Ming; Zhao, Meijuan; Wu, Zhe

    2018-05-01

    Based on a typical wing-rotor thrust model on the airship, the dynamic influence of the gyroscopic effects from the tip rotor acting on the overall coupled system has been analyzed. Meanwhile, the flexibility at the capsule boundary has been studied, as well. Hamilton's principle is employed to derive the general governing equations and the numerical Rayleigh-Ritz method is finally chosen in actual frequency computations. A new set of shape functions are put forward and verified which take most of the couplings among dimensions into account. The parameter studies are also conducted to make deep investigations. The results demonstrate that the inherent frequencies are significantly affected by the rotor speed and the flexible capsule condition. When rotor revolves, the modal shapes have reached into complex states and the components of each mode will change with the increment of rotor speed. The flexibility will also greatly reduce the entire frequencies compared with the rigid case. It is also demonstrated that the inherent property will be significantly affected by the mounting geometry, rotor inertia, the structural stiffness, and rotor speed.

  2. A study of CO2 precipitation method considering an ionic CO2 and Ca(OH)2 slurry

    International Nuclear Information System (INIS)

    Park, Sangwon; Jo, Hoyong; Kang, Dongwoo; Park, Jinwon

    2014-01-01

    CCS (carbon capture and storage) is the most popular technology used for the reduction of CO 2 in the post-combustion stage. However, the CCS process has some disadvantages including uncertainty about the stability of the land that is used to store the separated CO 2 . Consequently, CCU (carbon capture and utilization) technologies have recently received increased attention as a possible replacement for CCS. In this study, we utilized CO 2 fixation methods by using the metal carbonate mechanism. We selected 5 and 30 wt% MEA (mono-ethanolamine) solutions to rapidly make a carbonate and Ca(OH) 2 slurry. In all of the experiments, normal temperature and pressure conditions were maintained (except during desorption to check for residual CO 2 in the MEA solution). Consequently, most of the CO 2 was converted to carbonate. The MEA converted CO 2 to ionic CO 2 and rapidly created calcium carbonate. Also the formed solids that were observed were determined to be CaCO 3 and Ca(OH) 2 by X-ray diffractometry. Also, the MEA solution could be reused to absorb CO 2 . Therefore, we have confirmed the development of our suggested CCS process. This process has the ability not only to reuse emitted CO 2 , but it can also be employed to reuse construction wastes that include heavy metals. - Highlights: • We propose novel CO 2 conversion technology by utilizing an amine solution. • In this study, alkaline solutions were used to produce CO 2 precipitate. • The MEA (mono-ethanolamine) solution has a sufficient potential to fix CO 2 with metal sources under moderate condition. • Also, the Ca(OH) 2 slurry yielded enough Ca 2+ ions to make carbonate

  3. Assessment of Slope Stability and Interference of Structures Considering Seismity in Complex Engineering-Geological Conditions Using the Method of Finite Elements

    International Nuclear Information System (INIS)

    Menabdishvili, Papuna; Eremadze, Nelly

    2008-01-01

    There is elaborated the calculation model of slope deformation mode stability and the methodic of calculation considering the interference of structures to be built on it using the method of finite elements. There is examined the task of slope stability using the soil physically nonlinear finite element considering the seismicity 8. The deformation mode and field of coefficients of stability are obtained and slope supposed sliding curve is determined. The elaborated calculation methodic allows to determine the slope deformation mode, stability and select the optimum version of structure foundation at any slant and composition of slope layers

  4. The development of the measurement technique of the control rod worth with the inverse kinetics method considering the influence of the steady neutron source

    International Nuclear Information System (INIS)

    Takeuchi, Mitsuo; Wada, Shigeru; Takahashi, Hiroyuki; Hayashi, Kazuhiko; Murayama, Yoji

    2000-09-01

    At the research reactor such as JRR-3M, the operation management is carried out in order to ensure safe operation, for example, the excess reactivity is measured regularly and confirmed that it satisfies a safety condition. The excess reactivity is calculated using control rod position in criticality and control rod worth measured by a positive period method (P.P method), the conventional inverse kinetic method (IK method) and so on. The neutron source, however, influences measurement results and brings in a measurement error. A new IK method considering the influence of the steady neutron sources is proposed and applied to the JRR-3M. This report shows that the proposed IK method measures control rod worth more precisely than a conventional IK method. (author)

  5. Improved method for considering PMU’s uncertainty and its effect on real-time stability assessment methods based on Thevenin equivalent

    DEFF Research Database (Denmark)

    Perez, Angel; Jóhannsson, Hjörtur; Østergaard, Jacob

    2015-01-01

    This article characterizes experimentally the relation between phase and magnitude error from Phasor Measurement Units (PMU) in steady state and study its effect on real-time stability assessment methods. This is achieved by a set of laboratory tests applied to four different devices, where...... a bivariate Gaussian mixture distribution was used to represent the error, obtained experimentally, and later include it in the synthesized PMU measurement using the Monte Carlo Method. Two models for including uncertainty are compared and the results show that taking into account the correlation between...

  6. Water Flow in Karst Aquifer Considering Dynamically Variable Saturation Conduit

    Science.gov (United States)

    Tan, Chaoqun; Hu, Bill X.

    2017-04-01

    The karst system is generally conceptualized as dual-porosity system, which is characterized by low conductivity and high storage continuum matrix and high conductivity and quick flow conduit networks. And so far, a common numerical model for simulating flow in karst aquifer is MODFLOW2005-CFP, which is released by USGS in 2008. However, the steady-state approach for conduit flow in CFP is physically impractical when simulating very dynamic hydraulics with variable saturation conduit. So, we adopt the method proposed by Reimann et al. (2011) to improve current model, in which Saint-Venant equations are used to model the flow in conduit. Considering the actual background that the conduit is very big and varies along flow path and the Dirichlet boundary varies with rainfall in our study area in Southwest China, we further investigate the influence of conduit diameter and outflow boundary on numerical model. And we also analyze the hydraulic process in multi-precipitation events. We find that the numerical model here corresponds well with CFP for saturated conduit, and it could depict the interaction between matrix and conduit during very dynamic hydraulics pretty well compare with CFP.

  7. Considering soil-structure interaction effects in the equivalent static analysis method of the Iranian of the Iranian seismic building code

    International Nuclear Information System (INIS)

    Shakib, H.; Dehghani Ashkezari, G.

    2002-01-01

    In this study, based on the equivalent static analysis method of the Iranian seismic code, an algorithm is presented to consider the soil-structure interaction (SSI) effects. Modifications of free field motion and structural properties like period and damping due to soil situation are considered in the proposed algorithm. An increase for fundamental period of structure and a modification (usually increase) for it's effective damping are observed. The increase of period is due to the flexibility of the soil foundation and modification of damping is due to the dissipating energy in soil. In order to propose the relative expressions in the presented algorithm, the soil-structure analyses of 8, 10, 13 and 16 stories frames are carried out. By considering the NEHRP soil-structure interaction algorithm and findings of soil-structure interaction analyses carried out in this study, the algorithm based on the equivalent static analysis method of the Iranian seismic building code to consider the effect of soil-structure interaction

  8. Development of the DQFM method to consider the effect of correlation of component failures in seismic PSA of nuclear power plant

    International Nuclear Information System (INIS)

    Watanabe, Yuichi; Oikawa, Tetsukuni; Muramatsu, Ken

    2003-01-01

    This paper presents a new calculation method for considering the effect of correlation of component failures in seismic probabilistic safety assessment (PSA) of nuclear power plants (NPPs) by direct quantification of Fault Tree (FT) using the Monte Carlo simulation (DQFM) and discusses the effect of correlation on core damage frequency (CDF). In the DQFM method, occurrence probability of a top event is calculated as follows: (1) Response and capacity of each component are generated according to their probability distribution. In this step, the response and capacity can be made correlated according to a set of arbitrarily given correlation data. (2) For each component whether the component is failed or not is judged by comparing the response and the capacity. (3) The status of each component, failure or success, is assigned as either TRUE or FALSE in a Truth Table, which represents the logical structure of the FT to judge the occurrence of the top event. After this trial is iterated sufficient times, the occurrence probability of the top event is obtained as the ratio of the occurrence number of the top event to the number of total iterations. The DQFM method has the following features compared with the minimal cut set (MCS) method used in the well known Seismic Safety Margins Research Program (SSMRP). While the MCS method gives the upper bound approximation for occurrence probability of an union of MCSs, the DQFM method gives more exact results than the upper bound approximation. Further, the DQFM method considers the effect of correlation on the union and intersection of component failures while the MCS method considers only the effect on the latter. The importance of these features in seismic PSA of NPPs are demonstrated by an example calculation and a calculation of CDF in a seismic PSA. The effect of correlation on CDF was evaluated by the DQFM method and was compared with that evaluated in the application study of the SSMRP methodology. In the application

  9. A robust flexible-probabilistic programming method for planning municipal energy system with considering peak-electricity price and electric vehicle

    International Nuclear Information System (INIS)

    Yu, L.; Li, Y.P.; Huang, G.H.; An, C.J.

    2017-01-01

    Highlights: • A robust flexible probabilistic programming method is developed for planning MES. • Multiple uncertainties with various violations and satisfaction levels are examined. • Solutions of considering peak electricity prices and electric vehicles are analyzed. • RFPP-MES can better improve energy system reliability and abate pollutant emission. - Abstract: Effective electric power systems (EPS) planning with considering electricity price of 24-h time is indispensable in terms of load shifting, pollutant mitigation and energy demand-supply reliability as well as reducing electricity expense of end-users. In this study, a robust flexible probabilistic programming (RFPP) method is developed for planning municipal energy system (MES) with considering peak electricity prices (PEPs) and electric vehicles (EVs), where multiple uncertainties regarded as intervals, probability distributions and flexibilities as well as their combinations can be effectively reflected. The RFPP-MES model is then applied to planning Qingdao’s MES, where electrical load of 24-h time is simulated based on Monte Carlo. Results reveal that: (a) different time intervals lead to changes of energy supply patterns, the energy supply patterns would tend to the transition from self-supporting dominated (i.e. in valley hours) to outsourcing-dominated (i.e. in peak hours); (b) 15.9% of total imported electricity expense would be reduced compared to that without considering PEPs; (c) with considering EVs, the CO_2 emissions of Qingdao’s transportation could be reduced directly and the reduction rate would be 2.5%. Results can help decision makers improve energy supply patterns, reduce energy system costs and abate pollutant emissions as well as adjust end-users’ consumptions.

  10. Development on analytical method of computational dynamic property and optimum design method of texture construction considering microscopic texture of the materials for nuclear powers

    International Nuclear Information System (INIS)

    Shiraishi, Haruki

    1997-01-01

    In structural design of the nuclear reactor core, He void boundary embrittlement used for a factor of determining using temperature limit of the structural materials is said to be formed by He void present at the crystal particles boundary. However, it has been not succeeded in quantitative estimation on ductility of the materials containing He voids formed on neutron radiation. In this paper, the results of qualitative analysis on effect of voids shapes (size and density) on the boundary He embrittlement were reported. Using two-dimensional elastoplastic finite element method, stress-strain curve of the materials containing voids at crystal boundary was analyzed. At that time, suppositions such as continuous body dynamics, Von Mises yield condition, n-power hardening rule, repeating boundary condition and so on were adopted. As a result, it was found that deformation type was divided to inter-particle deformation and boundary deformation types, and that so-called boundary He embrittlement was belonged to the latter. (G.K.)

  11. Quantitative methods in ethnobotany and ethnopharmacology: considering the overall flora--hypothesis testing for over- and underused plant families with the Bayesian approach.

    Science.gov (United States)

    Weckerle, Caroline S; Cabras, Stefano; Castellanos, Maria Eugenia; Leonti, Marco

    2011-09-01

    We introduce and explain the advantages of the Bayesian approach and exemplify the method with an analysis of the medicinal flora of Campania, Italy. The Bayesian approach is a new method, which allows to compare medicinal floras with the overall flora of a given area and to investigate over- and underused plant families. In contrast to previously used methods (regression analysis and binomial method) it considers the inherent uncertainty around the analyzed data. The medicinal flora with 423 species was compiled based on nine studies on local medicinal plant use in Campania. The total flora comprises 2237 species belonging to 128 families. Statistical analysis was performed with the Bayesian method and the binomial method. An approximated χ(2)-test was used to analyze the relationship between use categories and higher taxonomic groups. Among the larger plant families we find the Lamiaceae, Rosaceae, and Malvaceae, to be overused in the local medicine of Campania and the Orchidaceae, Caryophyllaceae, Poaceae, and Fabaceae to be underused compared to the overall flora. Furthermore, do specific medicinal uses tend to be correlated with taxonomic plant groups. For example, are the Monocots heavily used for urological complaints. Testing for over- and underused taxonomic groups of a flora with the Bayesian method is easy to adopt and can readily be calculated in excel spreadsheets using the excel function Inverse beta (INV.BETA). In contrast to the binomial method the presented method is also suitable for small datasets. With larger datasets the two methods tend to converge. However, results are generally more conservative with the Bayesian method pointing out fewer families as over- or underused. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  12. Dynamic Power-Saving Method for Wi-Fi Direct Based IoT Networks Considering Variable-Bit-Rate Video Traffic.

    Science.gov (United States)

    Jin, Meihua; Jung, Ji-Young; Lee, Jung-Ryun

    2016-10-12

    With the arrival of the era of Internet of Things (IoT), Wi-Fi Direct is becoming an emerging wireless technology that allows one to communicate through a direct connection between the mobile devices anytime, anywhere. In Wi-Fi Direct-based IoT networks, all devices are categorized by group of owner (GO) and client. Since portability is emphasized in Wi-Fi Direct devices, it is essential to control the energy consumption of a device very efficiently. In order to avoid unnecessary power consumed by GO, Wi-Fi Direct standard defines two power-saving methods: Opportunistic and Notice of Absence (NoA) power-saving methods. In this paper, we suggest an algorithm to enhance the energy efficiency of Wi-Fi Direct power-saving, considering the characteristics of multimedia video traffic. Proposed algorithm utilizes the statistical distribution for the size of video frames and adjusts the lengths of awake intervals in a beacon interval dynamically. In addition, considering the inter-dependency among video frames, the proposed algorithm ensures that a video frame having high priority is transmitted with higher probability than other frames having low priority. Simulation results show that the proposed method outperforms the traditional NoA method in terms of average delay and energy efficiency.

  13. A Multi-Point Method Considering the Maximum Power Point Tracking Dynamic Process for Aerodynamic Optimization of Variable-Speed Wind Turbine Blades

    Directory of Open Access Journals (Sweden)

    Zhiqiang Yang

    2016-05-01

    Full Text Available Due to the dynamic process of maximum power point tracking (MPPT caused by turbulence and large rotor inertia, variable-speed wind turbines (VSWTs cannot maintain the optimal tip speed ratio (TSR from cut-in wind speed up to the rated speed. Therefore, in order to increase the total captured wind energy, the existing aerodynamic design for VSWT blades, which only focuses on performance improvement at a single TSR, needs to be improved to a multi-point design. In this paper, based on a closed-loop system of VSWTs, including turbulent wind, rotor, drive train and MPPT controller, the distribution of operational TSR and its description based on inflow wind energy are investigated. Moreover, a multi-point method considering the MPPT dynamic process for the aerodynamic optimization of VSWT blades is proposed. In the proposed method, the distribution of operational TSR is obtained through a dynamic simulation of the closed-loop system under a specific turbulent wind, and accordingly the multiple design TSRs and the corresponding weighting coefficients in the objective function are determined. Finally, using the blade of a National Renewable Energy Laboratory (NREL 1.5 MW wind turbine as the baseline, the proposed method is compared with the conventional single-point optimization method using the commercial software Bladed. Simulation results verify the effectiveness of the proposed method.

  14. Study on TVD parameters sensitivity of a crankshaft using multiple scale and state space method considering quadratic and cubic non-linearities

    Directory of Open Access Journals (Sweden)

    R. Talebitooti

    Full Text Available In this paper the effect of quadratic and cubic non-linearities of the system consisting of the crankshaft and torsional vibration damper (TVD is taken into account. TVD consists of non-linear elastomer material used for controlling the torsional vibration of crankshaft. The method of multiple scales is used to solve the governing equations of the system. Meanwhile, the frequency response of the system for both harmonic and sub-harmonic resonances is extracted. In addition, the effects of detuning parameters and other dimensionless parameters for a case of harmonic resonance are investigated. Moreover, the external forces including both inertia and gas forces are simultaneously applied into the model. Finally, in order to study the effectiveness of the parameters, the dimensionless governing equations of the system are solved, considering the state space method. Then, the effects of the torsional damper as well as all corresponding parameters of the system are discussed.

  15. Considering sampling strategy and cross-section complexity for estimating the uncertainty of discharge measurements using the velocity-area method

    Science.gov (United States)

    Despax, Aurélien; Perret, Christian; Garçon, Rémy; Hauet, Alexandre; Belleville, Arnaud; Le Coz, Jérôme; Favre, Anne-Catherine

    2016-02-01

    Streamflow time series provide baseline data for many hydrological investigations. Errors in the data mainly occur through uncertainty in gauging (measurement uncertainty) and uncertainty in the determination of the stage-discharge relationship based on gaugings (rating curve uncertainty). As the velocity-area method is the measurement technique typically used for gaugings, it is fundamental to estimate its level of uncertainty. Different methods are available in the literature (ISO 748, Q + , IVE), all with their own limitations and drawbacks. Among the terms forming the combined relative uncertainty in measured discharge, the uncertainty component relating to the limited number of verticals often includes a large part of the relative uncertainty. It should therefore be estimated carefully. In ISO 748 standard, proposed values of this uncertainty component only depend on the number of verticals without considering their distribution with respect to the depth and velocity cross-sectional profiles. The Q + method is sensitive to a user-defined parameter while it is questionable whether the IVE method is applicable to stream-gaugings performed with a limited number of verticals. To address the limitations of existing methods, this paper presents a new methodology, called FLow Analog UnceRtainty Estimation (FLAURE), to estimate the uncertainty component relating to the limited number of verticals. High-resolution reference gaugings (with 31 and more verticals) are used to assess the uncertainty component through a statistical analysis. Instead of subsampling purely randomly the verticals of these reference stream-gaugings, a subsampling method is developed in a way that mimicks the behavior of a hydrometric technician. A sampling quality index (SQI) is suggested and appears to be a more explanatory variable than the number of verticals. This index takes into account the spacing between verticals and the variation of unit flow between two verticals. To compute the

  16. Elastic-Plastic Numerical Analysis of Tunnel Stability Based on the Closest Point Projection Method Considering the Effect of Water Pressure

    Directory of Open Access Journals (Sweden)

    Zhan-ping Song

    2016-01-01

    Full Text Available To study the tunnel stability at various static water pressures and determine the mechanical properties and deformation behavior of surrounding rock, a modified effective stress formula was introduced into a numerical integration algorithm of elastic-plastic constitutive equation, that is, closest point projection method (CPPM. Taking the effects of water pressure and seepage into account, a CPPM-based formula was derived and a CPPM algorithm based on Drucker-Prager yield criterion considering the effect of pore water pressure was provided. On this basis, a CPPM-based elastic-plastic numerical analysis program considering pore water pressure was developed, which can be applied in the engineering of tunnels and other underground structures. The algorithm can accurately take the effects of groundwater on stability of surrounding rock mass into account and it can show the more pronounced effect of pore water pressure on stress, deformation, and the plastic zone in a tunnel. The stability of water flooding in Fusong tunnel was systematically analyzed using the developed program. The analysis results showed that the existence of groundwater seepage under tunnel construction will give rise to stress redistribution in the surrounding rock mass. Pore water pressure has a significant effect on the surrounding rock mass.

  17. Optimal Planning Method of On-load Capacity Regulating Distribution Transformers in Urban Distribution Networks after Electric Energy Replacement Considering Uncertainties

    Directory of Open Access Journals (Sweden)

    Yu Su

    2018-06-01

    Full Text Available Electric energy replacement is the umbrella term for the use of electric energy to replace oil (e.g., electric automobiles, coal (e.g., electric heating, and gas (e.g., electric cooking appliances, which increases the electrical load peak, causing greater valley/peak differences. On-load capacity regulating distribution transformers have been used to deal with loads with great valley/peak differences, so reasonably replacing conventional distribution transformers with on-load capacity regulating distribution transformers can effectively cope with load changes after electric energy replacement and reduce the no-load losses of distribution transformers. Before planning for on-load capacity regulating distribution transformers, the nodal effective load considering uncertainties within the life cycle after electric energy replacement was obtained by a Monte Carlo method. Then, according to the loss relation between on-load capacity regulating distribution transformers and conventional distribution transformers, three characteristic indexes of annual continuous apparent power curve and replacement criteria for on-load capacity regulating distribution transformers were put forward in this paper, and a set of distribution transformer replaceable points was obtained. Next, based on cost benefit analysis, a planning model of on-load capacity regulating distribution transformers which consists of investment profitability index within the life cycle, investment cost recouping index and capacity regulating cost index was put forward. The branch and bound method was used to solve the planning model within replaceable point set to obtain upgrading and reconstruction scheme of distribution transformers under a certain investment. Finally, planning analysis of on-load capacity regulating distribution transformers was carried out for electric energy replacement points in one urban distribution network under three scenes: certain load, uncertain load and nodal

  18. Crack growth prediction method considering interaction between multiple cracks. Growth of surface cracks of dissimilar size under cyclic tensile and bending load

    International Nuclear Information System (INIS)

    Kamaya, Masayuki; Miyokawa, Eiichi; Kikuchi, Masanori

    2011-01-01

    When multiple cracks approach one another, the stress intensity factor is likely to change due to the interaction of the stress field. This causes change in growth rate and shape of cracks. In particular, when cracks are in parallel position to the loading direction, the shape of cracks becomes non-planar. In this study, the complex growth of interacting cracks is evaluated by using the S-Version finite element method, in which local detailed finite element mesh (local mesh) is superposed on coarse finite element model (global mesh) representing the global structure. In order to investigate the effect of interaction on the growth behavior, two parallel surface cracks are subjected to cyclic tensile or bending load. It is shown that the smaller crack is shielded by larger crack due to the interaction and stops growing when the difference in size of two cracks is significant. Based on simulations of various conditions, a procedure and criteria for evaluating crack growth for fitness-for-service assessment is proposed. According to the procedure, the interaction is not necessary to be considered in the crack growth prediction when the difference in size of two cracks exceeds the criterion. (author)

  19. Solving the competitive facility location problem considering the reactions of competitor with a hybrid algorithm including Tabu Search and exact method

    Science.gov (United States)

    Bagherinejad, Jafar; Niknam, Azar

    2018-03-01

    In this paper, a leader-follower competitive facility location problem considering the reactions of the competitors is studied. A model for locating new facilities and determining levels of quality for the facilities of the leader firm is proposed. Moreover, changes in the location and quality of existing facilities in a competitive market where a competitor offers the same goods or services are taken into account. The competitor could react by opening new facilities, closing existing ones, and adjusting the quality levels of its existing facilities. The market share, captured by each facility, depends on its distance to customer and its quality that is calculated based on the probabilistic Huff's model. Each firm aims to maximize its profit subject to constraints on quality levels and budget of setting up new facilities. This problem is formulated as a bi-level mixed integer non-linear model. The model is solved using a combination of Tabu Search with an exact method. The performance of the proposed algorithm is compared with an upper bound that is achieved by applying Karush-Kuhn-Tucker conditions. Computational results show that our algorithm finds near the upper bound solutions in a reasonable time.

  20. Estimation of interplate coupling along Nankai trough considering the block motion model based on onland GNSS and seafloor GPS/A observation data using MCMC method

    Science.gov (United States)

    Kimura, H.; Ito, T.; Tadokoro, K.

    2017-12-01

    Introduction In southwest Japan, Philippine sea plate is subducting under the overriding plate such as Amurian plate, and mega interplate earthquakes has occurred at about 100 years interval. There is no occurrence of mega interplate earthquakes in southwest Japan, although it has passed about 70 years since the last mega interplate earthquakes: 1944 and 1946 along Nankai trough, meaning that the strain has been accumulated at plate interface. Therefore, it is essential to reveal the interplate coupling more precisely for predicting or understanding the mechanism of next occurring mega interplate earthquake. Recently, seafloor geodetic observation revealed the detailed interplate coupling distribution in expected source region of Nankai trough earthquake (e.g., Yokota et al. [2016]). In this study, we estimated interplate coupling in southwest Japan, considering block motion model and using seafloor geodetic observation data as well as onland GNSS observation data, based on Markov Chain Monte Carlo (MCMC) method. Method Observed crustal deformation is assumed that sum of rigid block motion and elastic deformation due to coupling at block boundaries. We modeled this relationship as a non-linear inverse problem that the unknown parameters are Euler pole of each block and coupling at each subfault, and solved them simultaneously based on MCMC method. Input data we used in this study are 863 onland GNSS observation data and 24 seafloor GPS/A observation data. We made some block division models based on the map of active fault tracing and selected the best model based on Akaike's Information Criterion (AIC): that is consist of 12 blocks. Result We find that the interplate coupling along Nankai trough has heterogeneous spatial distribution, strong at the depth of 0 to 20km at off Tokai region, and 0 to 30km at off Shikoku region. Moreover, we find that observed crustal deformation at off Tokai region is well explained by elastic deformation due to subducting Izu Micro

  1. Supporting the inevitable, not pushing the impractical

    International Nuclear Information System (INIS)

    Lewis, P.

    2015-01-01

    Engaging household customers in a greener and more energy efficient future is one which will be driven more by innovation in technologies and new business models than by the efforts or restrictions of the energy industry. Where there is a compelling benefit from an offering, it will be adopted by consumers. But the energy industry needs to support the technology and models in their early stages, without excessively supporting fruitless developments. We need facilitating regulations and outstanding customer education and awareness, and we need to enable and assist customers in their journey. All of this will require investment but in the long term the customer, society and the environment will benefit. (author).

  2. Considering New Paths for Success: An Examination of the Research and Methods on Urban School-University Partnerships Post-No Child Left Behind

    Science.gov (United States)

    Flynn, Joseph E.; Hunt, Rebecca D.; Johnson, Laura Ruth; Wickman, Scott A.

    2014-01-01

    This article examines urban school-university partnership research after No Child Left Behind. Central to the review is an analysis in the trend of research methods utilized across studies. It was found that many studies are single-case studies or anecdotal. There are few quantitative, sustained qualitative, or mixed-methods studies represented in…

  3. Oxygen Distributions-Evaluation of Computational Methods, Using a Stochastic Model for Large Tumour Vasculature, to Elucidate the Importance of Considering a Complete Vascular Network.

    Directory of Open Access Journals (Sweden)

    Jakob H Lagerlöf

    Full Text Available To develop a general model that utilises a stochastic method to generate a vessel tree based on experimental data, and an associated irregular, macroscopic tumour. These will be used to evaluate two different methods for computing oxygen distribution.A vessel tree structure, and an associated tumour of 127 cm3, were generated, using a stochastic method and Bresenham's line algorithm to develop trees on two different scales and fusing them together. The vessel dimensions were adjusted through convolution and thresholding and each vessel voxel was assigned an oxygen value. Diffusion and consumption were modelled using a Green's function approach together with Michaelis-Menten kinetics. The computations were performed using a combined tree method (CTM and an individual tree method (ITM. Five tumour sub-sections were compared, to evaluate the methods.The oxygen distributions of the same tissue samples, using different methods of computation, were considerably less similar (root mean square deviation, RMSD≈0.02 than the distributions of different samples using CTM (0.001< RMSD<0.01. The deviations of ITM from CTM increase with lower oxygen values, resulting in ITM severely underestimating the level of hypoxia in the tumour. Kolmogorov Smirnov (KS tests showed that millimetre-scale samples may not represent the whole.The stochastic model managed to capture the heterogeneous nature of hypoxic fractions and, even though the simplified computation did not considerably alter the oxygen distribution, it leads to an evident underestimation of tumour hypoxia, and thereby radioresistance. For a trustworthy computation of tumour oxygenation, the interaction between adjacent microvessel trees must not be neglected, why evaluation should be made using high resolution and the CTM, applied to the entire tumour.

  4. Inherent Complexity Research on the Bullwhip Effect in Supply Chains with Two Retailers: The Impact of Three Forecasting Methods Considering Market Share

    Directory of Open Access Journals (Sweden)

    Junhai Ma

    2014-01-01

    Full Text Available An important phenomenon in supply chain management which is known as the bullwhip effect suggests that demand variability increases as one moves up a supply chain. This paper contrasts the bullwhip effect for a two-stage supply chain consisting of one supplier and two retailers under three forecasting methods based on the market share. We can quantify the correlation coefficient between the two retailers clearly, in consideration of market share. The two retailers both employ the order-up-to inventory policy for replenishments. The bullwhip effect is measured, respectively, under the minimum mean squared error (MMSE, moving average (MA, and exponential smoothing (ES forecasting methods. The effect of autoregressive coefficient, lead time, and the market share on a bullwhip effect measure is investigated by using algebraic analysis and numerical simulation. And the comparison of the bullwhip effect under three forecasting methods is conducted. The conclusion suggests that different forecasting methods and various parameters lead to different bullwhip effects. Hence, the corresponding forecasting method should be chosen by the managers under different parameters in practice.

  5. Influences of Normalization Method on Biomarker Discovery in Gas Chromatography-Mass Spectrometry-Based Untargeted Metabolomics: What Should Be Considered?

    Science.gov (United States)

    Chen, Jiaqing; Zhang, Pei; Lv, Mengying; Guo, Huimin; Huang, Yin; Zhang, Zunjian; Xu, Fengguo

    2017-05-16

    Data reduction techniques in gas chromatography-mass spectrometry-based untargeted metabolomics has made the following workflow of data analysis more lucid. However, the normalization process still perplexes researchers, and its effects are always ignored. In order to reveal the influences of normalization method, five representative normalization methods (mass spectrometry total useful signal, median, probabilistic quotient normalization, remove unwanted variation-random, and systematic ratio normalization) were compared in three real data sets with different types. First, data reduction techniques were used to refine the original data. Then, quality control samples and relative log abundance plots were utilized to evaluate the unwanted variations and the efficiencies of normalization process. Furthermore, the potential biomarkers which were screened out by the Mann-Whitney U test, receiver operating characteristic curve analysis, random forest, and feature selection algorithm Boruta in different normalized data sets were compared. The results indicated the determination of the normalization method was difficult because the commonly accepted rules were easy to fulfill but different normalization methods had unforeseen influences on both the kind and number of potential biomarkers. Lastly, an integrated strategy for normalization method selection was recommended.

  6. New concept of damage evaluation method for core internal materials considering radiation induced stress relaxation (1). Experiments and modeling of radiation effects

    International Nuclear Information System (INIS)

    Miwa, Yukio; Kondo, Keietsu; Okubo, Nariaki; Kaji, Yoshiyuki; Tsukada, Takashi

    2009-01-01

    In order to build the new concept of material damage evaluation method, synergistic effect of radiation and residual stress on material degradation was estimated experimentally, and the effect of radiation induced stress relaxation on retardation of material degradation was observed. (author)

  7. Development of a new cause classification method considering plant ageing and human errors for adverse events which occurred in nuclear power plants and some results of its application

    International Nuclear Information System (INIS)

    Miyazaki, Takamasa

    2007-01-01

    The adverse events which occurred in nuclear power plants are analyzed to prevent similar events, and in the analysis of each event, the cause of the event is classified by a cause classification method. This paper shows a new cause classification method which is improved in several points as follows: (1) the whole causes are systematically classified into three major categories such as machine system, operation system and plant outside causes, (2) the causes of the operation system are classified into several management errors normally performed in a nuclear power plant, (3) the content of ageing is defined in detail for their further analysis, (4) human errors are divided and defined by the error stage, (5) human errors can be related to background factors, and so on. This new method is applied to the adverse events which occurred in domestic and overseas nuclear power plants in 2005. From these results, it is clarified that operation system errors account for about 60% of the whole causes, of which approximately 60% are maintenance errors, about 40% are worker's human errors, and that the prevention of maintenance errors, especially worker's human errors is crucial. (author)

  8. An Implementation Method of the Fractional-Order PID Control System Considering the Memory Constraint and its Application to the Temperature Control of Heat Plate

    Science.gov (United States)

    Sasano, Koji; Okajima, Hiroshi; Matsunaga, Nobutomo

    Recently, the fractional order PID (FO-PID) control, which is the extension of the PID control, has been focused on. Even though the FO-PID requires the high-order filter, it is difficult to realize the high-order filter due to the memory limitation of digital computer. For implementation of FO-PID, approximation of the fractional integrator and differentiator are required. Short memory principle (SMP) is one of the effective approximation methods. However, there is a disadvantage that the approximated filter with SMP cannot eliminate the steady-state error. For this problem, we introduce the distributed implementation of the integrator and the dynamic quantizer to make the efficient use of permissible memory. The objective of this study is to clarify how to implement the accurate FO-PID with limited memories. In this paper, we propose the implementation method of FO-PID with memory constraint using dynamic quantizer. And the trade off between approximation of fractional elements and quantized data size are examined so as to close to the ideal FO-PID responses. The effectiveness of proposed method is evaluated by numerical example and experiment in the temperature control of heat plate.

  9. Considering Student Coaching

    Science.gov (United States)

    Keen, James P.

    2014-01-01

    What does student coaching involve and what considerations make sense in deciding to engage an outside contractor to provide personal coaching? The author explores coaching in light of his own professional experience and uses this reflection as a platform from which to consider the pros and cons of student coaching when deciding whether to choose…

  10. Clustering pesticides according to their molecular properties and their impacts by considering additional ecotoxicological parameters in the TyPol method

    Science.gov (United States)

    Traore, Harouna; Crouzet, Olivier; Mamy, Laure; Sireyjol, Christine; Rossard, Virginie; Servien, Remy; Latrille, Eric; Benoit, Pierre

    2017-04-01

    The understanding of the fate of pesticides and their environmental impacts largely relies on their molecular properties. We recently developed 'TyPol' (Typology of Pollutants), a clustering method based on statistical analyses combining several environmental endpoints (i.e. environmental parameters such as sorption coefficient, degradation half-life) and one ecotoxicological one (bioconcentration factor), and structural molecular descriptors (number of atoms in the molecule, molecular surface, dipole moment, energy of orbitals…). TyPol has been conceived on the available knowledge on QSAR of a wide diversity of organic compounds (Mamy et al., 2015). This approach also allows to focus on transformation products present in different clusters and to infer possible changes in environmental fate consecutively to different degradation processes (Servien et al., 2014; Benoit et al., 2016). The initial version of TyPol did not include any ecotoxicological parameters except the bioconcentration factor (BCF), which informs more on the transfer along the trophic chain rather than on the effects on non-target organisms. The objective was to implement the TyPol database with a data set of ecotoxicological data concerning pesticides and several aquatic and terrestrial organisms, in order to test the possibility to extend TyPol to ecotoxicological effects on various organisms. The data analysis (available literature and databases) revealed that relevant ecotoxicological endpoints for terrestrial organisms such as soil microorganisms and macroinvertebrates are lacking compared to aquatic organisms. We have added seven parameters for acute (EC50, LC50) and chronic (NOEC) toxicological effects for the following organisms: Daphnia, Algae, Lemna and Earthworm. In this new configuration, TyPol was used to classify about 45 pesticides in different behavioural and ecotoxicity clusters. The clustering results were analyzed to reveals relationships between molecular descriptors

  11. A leader-follower-interactive method for regional water resources management with considering multiple water demands and eco-environmental constraints

    Science.gov (United States)

    Chen, Yizhong; Lu, Hongwei; Li, Jing; Ren, Lixia; He, Li

    2017-05-01

    This study presents the mathematical formulation and implementations of a synergistic optimization framework based on an understanding of water availability and reliability together with the characteristics of multiple water demands. This framework simultaneously integrates a set of leader-followers-interactive objectives established by different decision makers during the synergistic optimization. The upper-level model (leader's one) determines the optimal pollutants discharge to satisfy the environmental target. The lower-level model (follower's one) accepts the dispatch requirement from the upper-level one and dominates the optimal water-allocation strategy to maximize economic benefits representing the regional authority. The complicated bi-level model significantly improves upon the conventional programming methods through the mutual influence and restriction between the upper- and lower-level decision processes, particularly when limited water resources are available for multiple completing users. To solve the problem, a bi-level interactive solution algorithm based on satisfactory degree is introduced into the decision-making process for measuring to what extent the constraints are met and the objective reaches its optima. The capabilities of the proposed model are illustrated through a real-world case study of water resources management system in the district of Fengtai located in Beijing, China. Feasible decisions in association with water resources allocation, wastewater emission and pollutants discharge would be sequentially generated for balancing the objectives subject to the given water-related constraints, which can enable Stakeholders to grasp the inherent conflicts and trade-offs between the environmental and economic interests. The performance of the developed bi-level model is enhanced by comparing with single-level models. Moreover, in consideration of the uncertainty in water demand and availability, sensitivity analysis and policy analysis are

  12. Comprehensive method for analyzing the power conversion efficiency of organic solar cells under different spectral irradiances considering both photonic and electrical characteristics

    International Nuclear Information System (INIS)

    Chong, Kok-Keong; Khlyabich, Petr P.; Hong, Kai-Jeat; Reyes-Martinez, Marcos; Rand, Barry P.; Loo, Yueh-Lin

    2016-01-01

    Highlights: • Method to analyze power-conversion efficiency under various solar irradiance. • Power-conversion efficiency at local irradiance is 5.4% higher than AM1.5G. • Diffuse local irradiance has gain of 23.7–27.9% relative to AM1.5G conditions. • Annual average energy density yield is estimated as 31.89 kW h/m 2 in Malaysia. - Abstract: The solar spectral irradiance varies significantly for different locations and time due to latitude, humidity, cosine effect of incident sunlight, etc. For convenience, the power-conversion efficiency of a solar cell is referenced to the international standard of AM1.5G spectral irradiance, which inevitably leads to varying performance of deployed solar cells under the specific local climate and insolation conditions. To predict the actual performance of solar cells under local climate conditions, we propose a methodology to compute the power-conversion efficiency of organic photovoltaic cells based upon indoor measurement with a solar simulator, the measured local solar spectrum, and making use of both optical and electrical factors. From our study, the annual average energy density yield of poly(3-hexylthiophene):phenyl-C 61 -butyric acid methyl ester (P3HT:PCBM) bulk-heterojunction organic solar cells under the local spectral irradiance of Malaysia is estimated to be 31.89 kW h/m 2 and the power-conversion efficiency is increased by 5.4% compared to that measured under AM1.5G conditions. In addition, diffuse solar irradiance (cloudy condition) was found to be in favor of P3HT:PCBM solar cells, with gain of 23.7–27.9% relative to AM1.5G conditions.

  13. Qualitative methods: a research approach worth considering

    African Journals Online (AJOL)

    Qualitative research forms part of the classical cycle of research. ... putting aside any preconceived ideas and “intuiting”- focusing on the ... that is, no new information is obtained. ... and communication with the scientific community are adhered.

  14. Telecommuting. Factors to consider.

    Science.gov (United States)

    D'Arruda, K A

    2001-10-01

    1. Telecommuting is a work arrangement in which employees work part time or full time from their homes or smaller telework centers. They communicate with employers via computer. 2. Telecommuting can raise legal issues for companies. Can telecommuting be considered a reasonable accommodation under the Americans With Disabilities Act? When at home, is a worker injured within the course and scope of their employment for purposes of workers' compensation? 3. Occupational and environmental health nurses may need to alter existing programs to meet the distinct needs of telecommuters. Often, there are ergonomic issues and home office safety issues which are not of concern to other employees. Additionally, occupational and environmental health nurses may have to offer programs in new formats (e.g., Internet or Intranet programs) to effectively communicate with teleworkers.

  15. Now consider diffusion

    International Nuclear Information System (INIS)

    Dungey, J.W.

    1984-01-01

    The authors want to talk about future work, but first he will reply to Stan Cowley's comment on his naivety in believing in the whole story to 99% confidence in '65, when he knew about Fairfield's results. Does it matter whether you make the right judgment about theories? Yes, it does, particularly for experimentalists perhaps, but also for theorists. The work you do later depends on the judgment you've made on previous work. People have wasted a lot of time developing on insecure or even wrong foundations. Now for future work. One mild surprise the authors have had is that they haven't heard more about diffusion, in two contexts. Gordon Rostoker is yet to come and he may talk about particles getting into the magnetosphere by diffusion. Lots of noise is observed and so diffusion must happen. If time had not been short, the authors were planning to discuss in a handwaving way what sort of diffusion mechanisms one might consider. The other aspect of diffusion he was going to talk about is at the other end of things and is velocity diffusion, which is involved in anomalous resistivity

  16. Prediction of clay content from water vapour sorption isotherms considering hysteresis and soil organic matter content

    DEFF Research Database (Denmark)

    Arthur, E.; Tuller, M.; Møldrup, Per

    2015-01-01

    Soil texture, in particular the clay fraction, governs numerous environmental, agricultural and engineering soil processes. Traditional measurement methods for clay content are laborious and impractical for large-scale soil surveys. Consequently, clay prediction models that are based on water...... within a RH range from 3 to 93%. The clay contents, which ranged between 1 and 56%, were measured with a combination of sieving and sedimentation methods. Two regression models were developed for both adsorption and desorption at 10 RH levels (5, 10, 20, 30, 40, 50, 60, 70, 80 and 90%). While the first...

  17. Which are the cut-off values of 2D-Shear Wave Elastography (2D-SWE) liver stiffness measurements predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method?

    Energy Technology Data Exchange (ETDEWEB)

    Sporea, Ioan, E-mail: isporea@umft.ro; Bota, Simona, E-mail: bota_simona1982@yahoo.com; Gradinaru-Taşcău, Oana, E-mail: bluonmyown@yahoo.com; Şirli, Roxana, E-mail: roxanasirli@gmail.com; Popescu, Alina, E-mail: alinamircea.popescu@gmail.com; Jurchiş, Ana, E-mail: ana.jurchis@yahoo.com

    2014-03-15

    Introduction: To identify liver stiffness (LS) cut-off values assessed by means of 2D-Shear Wave Elastography (2D-SWE) for predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method. Methods: Our prospective study included 383 consecutive subjects, with or without hepatopathies, in which LS was evaluated by means of TE and 2D-SWE. To discriminate between various stages of fibrosis by TE we used the following LS cut-offs (kPa): F1-6, F2-7.2, F3-9.6 and F4-14.5. Results: The rate of reliable LS measurements was similar for TE and 2D-SWE: 73.9% vs. 79.9%, p = 0.06. Older age and higher BMI were associated for both TE and 2D-SWE with the impossibility to obtain reliable LS measurements. Reliable LS measurements by both elastographic methods were obtained in 65.2% of patients. A significant correlation was found between TE and 2D-SWE measurements (r = 0.68). The best LS cut-off values assessed by 2D-SWE for predicting different stages of liver fibrosis were: F ≥ 1: >7.1 kPa (AUROC = 0.825); F ≥ 2: >7.8 kPa (AUROC = 0.859); F ≥ 3: >8 kPa (AUROC = 0.897) and for F = 4: >11.5 kPa (AUROC = 0.914). Conclusions: 2D-SWE is a reliable method for the non-invasive evaluation of liver fibrosis, considering TE as the reference method. The accuracy of 2D-SWE measurements increased with the severity of liver fibrosis.

  18. A practical method for determining γ-ray full-energy peak efficiency considering coincidence-summing and self-absorption corrections for the measurement of environmental samples after the Fukushima reactor accident

    Energy Technology Data Exchange (ETDEWEB)

    Shizuma, Kiyoshi, E-mail: shizuma@hiroshima-u.ac.jp [Graduate School of Engineering, Hiroshima University, Higashi-Hiroshima 739-8527 (Japan); Oba, Yurika; Takada, Momo [Graduate School of Integrated Arts and Sciences, Hiroshima University, Higashi-Hiroshima 739-8521 (Japan)

    2016-09-15

    A method for determining the γ-ray full-energy peak efficiency at positions close to three Ge detectors and at the well port of a well-type detector was developed for measuring environmental volume samples containing {sup 137}Cs, {sup 134}Cs and {sup 40}K. The efficiency was estimated by considering two correction factors: coincidence-summing and self-absorption corrections. The coincidence-summing correction for a cascade transition nuclide was estimated by an experimental method involving measuring a sample at the far and close positions of a detector. The derived coincidence-summing correction factors were compared with those of analytical and Monte Carlo simulation methods and good agreements were obtained. Differences in the matrix of the calibration source and the environmental sample resulted in an increase or decrease of the full-energy peak counts due to the self-absorption of γ-rays in the sample. The correction factor was derived as a function of the densities of several matrix materials. The present method was applied to the measurement of environmental samples and also low-level radioactivity measurements of water samples using the well-type detector.

  19. Investigation of loss of coolant accidents in pressurized water reactors using the ''Dynamic Best-Estimate Safety Analysis'' (DYBESA) method for considering of uncertainties in TRACE

    International Nuclear Information System (INIS)

    Sporn, Michael; Hurtado, Antonio

    2016-01-01

    Loss of coolant accident must take uncertainties with potentially strong effects on the accident sequence prediction into account. For example, uncertainties in computational model input parameters resulting from varying geometry and material data due to manufacturing tolerances or unavailable measurements should be considered. The uncertainties of physical models used by the software program are also significant. In this paper, use of the ''Dynamic Best-Estimate Safety Analysis'' (DYBESA) method to quantify the uncertainties in the TRACE thermal-hydraulic program is demonstrated. For demonstration purposes loss of coolant accidents with breaks of various types and sizes in a DN 700 reactor coolant pipe are used as an example Application.

  20. Magnet pole shape design for reduction of thrust ripple of slotless permanent magnet linear synchronous motor with arc-shaped magnets considering end-effect based on analytical method

    Directory of Open Access Journals (Sweden)

    Kyung-Hun Shin

    2017-05-01

    Full Text Available The shape of the magnet is essential to the performance of a slotless permanent magnet linear synchronous machine (PMLSM because it is directly related to desirable machine performance. This paper presents a reduction in the thrust ripple of a PMLSM through the use of arc-shaped magnets based on electromagnetic field theory. The magnetic field solutions were obtained by considering end effect using a magnetic vector potential and two-dimensional Cartesian coordinate system. The analytical solution of each subdomain (PM, air-gap, coil, and end region is derived, and the field solution is obtained by applying the boundary and interface conditions between the subdomains. In particular, an analytical method was derived for the instantaneous thrust and thrust ripple reduction of a PMLSM with arc-shaped magnets. In order to demonstrate the validity of the analytical results, the back electromotive force results of a finite element analysis and experiment on the manufactured prototype model were compared. The optimal point for thrust ripple minimization is suggested.

  1. Considering subject positions with Biesta

    OpenAIRE

    Välitalo, R. (Riku)

    2017-01-01

    Abstract People who attended the ICPIC conference last summer were given a opportunity to consider some perspectives offered by the acknowledged scholar and educational thinker, Gert Biesta. His presentation in Madrid focused on exploring the educational significance of doing philosophy with children from a particular viewpoint. Biesta addressed the question of whether Philosophy for Children (P4C) movement can offer something more than a clear head, that is, a critical, creative, caring a...

  2. Modelling parking behaviour considering heterogeneity

    Energy Technology Data Exchange (ETDEWEB)

    San Martin, G.A.; Ibeas Portilla, A.; Alonso Oreña, B.; Olio, L. del

    2016-07-01

    Most of motorized trips in cities of middle and small size are made in public transport and mainly in private vehicle, this has caused a saturation in parking systems of the cities, causing important problems to society, one of the most important problems is high occupancy of public space by parking systems. Thus, is required the estimation of models that reproduce users’ behaviour when they are choosing for parking in cities, to carry out transport policies to improve transport efficiency and parking systems in the cities. The aim of this paper is the specification and estimation of models that simulate users’ behaviour when they are choosing among alternatives of parking that there are in the city: free on street parking, paid on street parking, paid on underground parking and Park and Ride (now there isn´t). For this purpose, is proposed a multinomial logit model that consider systematic and random variations in tastes. Data of users’ behaviour from the different alternatives of parking have been obtained with a stated preference surveys campaign which have been done in May 2015 in the principal parking zones of the city of Santander. In this paper, we provide a number of improvements to previously developed methodologies because of we consider much more realism to create the scenarios stated preference survey, obtaining better adjustments. (Author)

  3. The US considers consumer choice

    International Nuclear Information System (INIS)

    McCaughey, John.

    1996-01-01

    About half the states in the USA are seriously considering giving domestic customers the right to choose their own gas supplier as large consumers have been able to for years. This is referred to as ''unbundling''. Of the 1400 or so natural gas local distribution companies (LDCs), about one third appear to support unbundling, another third are opposed and the remainder are uncertain; small and medium sized LDCs are most likely to be opposed. A number of state regulators are also ambivalent or actively hostile to the idea. The LDCs supply consumers with gas at the price the LDC pays for it. Their profits are made from connections and the transport of as large a volume of gas as possible for which the supplier pays passthrough charges. The complex arguments as to whether unbundling will prove favourable to the LDCs and what benefits and disadvantages there may be for customers are examined. (UK)

  4. Should Euthanasia Be Considered Iatrogenic?

    Science.gov (United States)

    Barone, Silvana; Unguru, Yoram

    2017-08-01

    As more countries adopt laws and regulations concerning euthanasia, pediatric euthanasia has become an important topic of discussion. Conceptions of what constitutes harm to patients are fluid and highly dependent on a myriad of factors including, but not limited to, health care ethics, family values, and cultural context. Euthanasia could be viewed as iatrogenic insofar as it results in an outcome (death) that some might consider inherently negative. However, this perspective fails to acknowledge that death, the outcome of euthanasia, is not an inadvertent or preventable complication but rather the goal of the medical intervention. Conversely, the refusal to engage in the practice of euthanasia might be conceived as iatrogenic insofar as it might inadvertently prolong patient suffering. This article will explore cultural and social factors informing families', health care professionals', and society's views on pediatric euthanasia in selected countries. © 2017 American Medical Association. All Rights Reserved.

  5. Considering RNAi experimental design in parasitic helminths.

    Science.gov (United States)

    Dalzell, Johnathan J; Warnock, Neil D; McVeigh, Paul; Marks, Nikki J; Mousley, Angela; Atkinson, Louise; Maule, Aaron G

    2012-04-01

    Almost a decade has passed since the first report of RNA interference (RNAi) in a parasitic helminth. Whilst much progress has been made with RNAi informing gene function studies in disparate nematode and flatworm parasites, substantial and seemingly prohibitive difficulties have been encountered in some species, hindering progress. An appraisal of current practices, trends and ideals of RNAi experimental design in parasitic helminths is both timely and necessary for a number of reasons: firstly, the increasing availability of parasitic helminth genome/transcriptome resources means there is a growing need for gene function tools such as RNAi; secondly, fundamental differences and unique challenges exist for parasite species which do not apply to model organisms; thirdly, the inherent variation in experimental design, and reported difficulties with reproducibility undermine confidence. Ideally, RNAi studies of gene function should adopt standardised experimental design to aid reproducibility, interpretation and comparative analyses. Although the huge variations in parasite biology and experimental endpoints make RNAi experimental design standardization difficult or impractical, we must strive to validate RNAi experimentation in helminth parasites. To aid this process we identify multiple approaches to RNAi experimental validation and highlight those which we deem to be critical for gene function studies in helminth parasites.

  6. Study on seismic stability of seawall in man-made island. Pt. 3. Development of evaluation method for seismic stability of seawall considering dynamic interaction of armour embankment and caisson

    International Nuclear Information System (INIS)

    Tochigi, Hitoshi; Kanatani, Mamoru; Kawai, Tadashi

    1999-01-01

    In the development of siting technology for off-shore nuclear power plants on man-made island, assessing the stability of seawall which ensure the safety of backfill ground against ocean waves and earthquakes is indispensable. Concerning the seismic stability of seawall, it is indicated that the evaluation of the influence of lateral pressure of armour embankment acting on the caisson wall is an important factor. We proposed modeling method of discontinuity such as armour unit by distinct element method (DEM) and combined them with caisson type seawall model idealized by FEM. To show the validity of this DEM-FEM hybrid analysis method, the numerical simulation for the shaking table tests was conducted. For the two kinds of seawall model with armour embankment and without the one, the lateral displacement of the seawall induced by sliding of caisson is successfully reproduced and accuracy of above mentioned numerical procedure is confirmed. (author)

  7. TrigDB back-filling method in EEW for the regional earthquake for reducing false location of the deep focus earthquake event by considering neighborhood triggers and forced association.

    Science.gov (United States)

    Park, J. H.; Chi, H. C.; Lim, I. S.; Seong, Y. J.; Pak, J.

    2017-12-01

    During the first phase of EEW(Earthquake Early Warning) service to the public by KMA (Korea Meteorological Administration) from 2015 in Korea, KIGAM(Korea Institute of Geoscience and Mineral Resources) has adopted ElarmS2 of UC Berkeley BSL and modified local magnitude relation, travel time curves and association procedures so called TrigDB back-filling method. The TrigDB back-filling method uses a database of sorted lists of stations based on epicentral distances of the pre-defined events located on the grids for 1,401 × 1,601 = 2,243,001 events around the Korean Peninsula at a grid spacing of 0.05 degrees. When the version of an event is updated, the TrigDB back-filling method is invoked. First, the grid closest to the epicenter of an event is chosen from the database and candidate stations, which are stations corresponding to the chosen grid and also adjacent to the already-associated stations, are selected. Second, the directions from the chosen grid to the associated stations are averaged to represent the direction of wave propagation, which is used as a reference for computing apparent travel times. The apparent travel times for the associated stations are computed using a P wave velocity of 5.5 km/s from the grid to the projected points in the reference direction. The travel times for the triggered candidate stations are also computed and used to obtain the difference between the apparent travel times of the associated stations and the triggered candidates. Finally, if the difference in the apparent travel times is less than that of the arrival times, the method forces the triggered candidate station to be associated with the event and updates the event location. This method is useful to reduce false locations of events which could be generated from the deep (> 500 km) and regional distance earthquakes happening on the subduction pacific plate boundaries. In comparison of the case study between TrigDB back-filling applied system and the others, we could get

  8. Authentication of gold products by nuclear methods

    International Nuclear Information System (INIS)

    De Jesus, A.S.M.

    1985-01-01

    The falsification of valuable gold items is a threat to the authenticity of gold products. To solve this, there is a continuous search for reliable, practicle and cost-effective means of identifying forgeries. Because nuclear techniques as applied to elemental analysis have a high degree of specificity, are non-destructive and permit the availability of results within a relatively short time, a few of these techniques were investigated and reviewed in the article. Work on some promising methods in the author's laboratory is also discussed. Constraints such as those imposed by the time taken by the measurement, negligible residual activity within a relatively short time were also considered. The techniques that were investigated include: the transmission of electromagnetic radiation through a medium; scattering of electromagnetic radiation; x-ray fluorescence analysis; neutron activation analysis; activation by the inelastic scattering of gamma radiation; activation by the inelastic scattering of fast neutrons; absorption and scattering of fast neutrons; self-attenuation of gamma radiation. The shape of the object being investigated, should also be considered. It is concluded that a system based on the inelastic scattering of neutrons emitted by a 241 Am/Be source (halflife = 433 years) is practical and capable of authenticating gold and gold alloy coins such as Krugerrands. The feasibility study on the assaying of gold jewelry by means of nuclear methods also showed it to be impractical

  9. Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan

    Energy Technology Data Exchange (ETDEWEB)

    Yamagami, Y; Tani, T [Science University of Tokyo, Tokyo (Japan)

    1996-10-27

    Based on the basic quality equation of photovoltaic (PV) cell, a quality equation of PV module has been constructed by considering the spectral distribution of solar radiation and its intensity. A calculation method has been also proposed for determining the output from current-voltage (I-V) curves. Effectiveness of this method was examined by comparing calculated results and observed results. Amorphous Si (a-Si) and polycrystal Si PV modules were examined. By considering the environmental factors, differences of the annual output between the calculated and observed values were reduced from 2.50% to 0.95% for the a-Si PV module, and from 2.52% to 1.24% for the polycrystal Si PV module, which resulted in the reduction more than 50%. For the a-Si PV module, the environmental factor most greatly affecting the annual output was the spectral distribution of solar radiation, which was 3.86 times as large as the cell temperature, and 1.04 times as large as the intensity of solar radiation. For the polycrystal PV module, the environmental factor most greatly affecting the annual output was the cell temperature, which was 7.05 times as large as the spectral distribution of solar radiation, and 1.74 times as large as the intensity of solar radiation. 6 refs., 4 figs., 1 tab.

  10. System Reliability Analysis Considering Correlation of Performances

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Saekyeol; Lee, Tae Hee [Hanyang Univ., Seoul (Korea, Republic of); Lim, Woochul [Mando Corporation, Seongnam (Korea, Republic of)

    2017-04-15

    Reliability analysis of a mechanical system has been developed in order to consider the uncertainties in the product design that may occur from the tolerance of design variables, uncertainties of noise, environmental factors, and material properties. In most of the previous studies, the reliability was calculated independently for each performance of the system. However, the conventional methods cannot consider the correlation between the performances of the system that may lead to a difference between the reliability of the entire system and the reliability of the individual performance. In this paper, the joint probability density function (PDF) of the performances is modeled using a copula which takes into account the correlation between performances of the system. The system reliability is proposed as the integral of joint PDF of performances and is compared with the individual reliability of each performance by mathematical examples and two-bar truss example.

  11. System Reliability Analysis Considering Correlation of Performances

    International Nuclear Information System (INIS)

    Kim, Saekyeol; Lee, Tae Hee; Lim, Woochul

    2017-01-01

    Reliability analysis of a mechanical system has been developed in order to consider the uncertainties in the product design that may occur from the tolerance of design variables, uncertainties of noise, environmental factors, and material properties. In most of the previous studies, the reliability was calculated independently for each performance of the system. However, the conventional methods cannot consider the correlation between the performances of the system that may lead to a difference between the reliability of the entire system and the reliability of the individual performance. In this paper, the joint probability density function (PDF) of the performances is modeled using a copula which takes into account the correlation between performances of the system. The system reliability is proposed as the integral of joint PDF of performances and is compared with the individual reliability of each performance by mathematical examples and two-bar truss example.

  12. On-line adaptive battery impedance parameter and state estimation considering physical principles in reduced order equivalent circuit battery models. Part 1. Requirements, critical review of methods and modeling

    Science.gov (United States)

    Fleischer, Christian; Waag, Wladislaw; Heyn, Hans-Martin; Sauer, Dirk Uwe

    2014-08-01

    Lithium-ion battery systems employed in high power demanding systems such as electric vehicles require a sophisticated monitoring system to ensure safe and reliable operation. Three major states of the battery are of special interest and need to be constantly monitored, these include: battery state of charge (SoC), battery state of health (capcity fade determination, SoH), and state of function (power fade determination, SoF). In a series of two papers, we propose a system of algorithms based on a weighted recursive least quadratic squares parameter estimator, that is able to determine the battery impedance and diffusion parameters for accurate state estimation. The functionality was proven on different battery chemistries with different aging conditions. The first paper investigates the general requirements on BMS for HEV/EV applications. In parallel, the commonly used methods for battery monitoring are reviewed to elaborate their strength and weaknesses in terms of the identified requirements for on-line applications. Special emphasis will be placed on real-time capability and memory optimized code for cost-sensitive industrial or automotive applications in which low-cost microcontrollers must be used. Therefore, a battery model is presented which includes the influence of the Butler-Volmer kinetics on the charge-transfer process. Lastly, the mass transport process inside the battery is modeled in a novel state-space representation.

  13. RESTAURANT RESERVATION MANAGEMENT CONSIDERING TABLE COMBINATION

    Directory of Open Access Journals (Sweden)

    Qing Miao

    Full Text Available ABSTRACT This paper presents a case study of table reservation practice for restaurant business within Walt Disney World. A unique feature here is to consider table combination to capture revenue potentials from different party sizes and at different time periods. For example, a party of large size can be served by combining two or more small tables. A mixed integer programming (MIP model is developed to make the reservation recommendation. We propose a rolling horizon reservation policy such that the value of a particular table is periodically evaluated and updated. This is a typical revenue management method in the airlines and other industries, the essence of which is to compare the future expected revenue with a currently offered price. Using historical data, numerical test shows a significant revenue improvement potential from our proposed model.

  14. Orbital Epidermoid Cysts: A Diagnosis to Consider

    Directory of Open Access Journals (Sweden)

    Rania A. Ahmed

    2014-01-01

    Full Text Available Background. Orbital epidermoids form a rare pathological entity that is separate from dermoid cysts. They have variable clinical and radiological presentations and they should be considered in the differential diagnosis of orbital cystic lesions. This work describes the various clinical and radiological presentations of 17 cases of epidermoid cysts and the surgical outcome. Method. A prospective interventional study was conducted on 17 patients diagnosed with epidermoid cysts. Patients’ symptoms and signs were recorded; CT scan was done for all patients. All lesions were removed through anterior orbitotomy and histopathological diagnosis confirmed. Results. Mean age of patients was 16.3 years ±  10.54. Main complaints were lid swelling, masses, ocular dissimilarity, chronic pain, and ocular protrusion. Clinical signs varied from lid swelling and masses in all cases to proptosis, globe displacement, limitation of ocular motility, and scars. Radiological findings ranged from homogenous hypodense masses (58.8% to homogenous radiolucent (17.6% and heterogenous masses (23.5%. No recurrences following surgeries were reported throughout the follow-up (mean 18.8 months ±  0.72. Conclusion. Deep orbital epidemoid cysts are a separate entity that can behave like deep orbital epidermoid; however, they usually present at a relatively older age. They can be associated with increased orbital volume but not necessarily related to bony sutures.

  15. Considering the cultural context in psychopathology formulations

    Directory of Open Access Journals (Sweden)

    Junaid Hassim

    2013-03-01

    Full Text Available Background. Mental health research appears to be continually transforming. Recent literature reflects a greater appreciation for the ways in which pathoplastic features of culture modulate emotional regulation. This article introduces those aspects of the literature which explore the (reconsideration of culture as a dynamic and essential construct in the clinical formulation of psychopathology. Objectives. The study aims to review literature that focuses on the dynamic influence of culture in psychopathology. Furthermore, the researchers aim to present a view on the ways in which culture appeared to shape the topography of psychopathology nosology. Method. A literature review of 31 sources. Results. The review indicated that 29 literature sources were conceptual in design, suggesting a great need for more empirical research. This section also explored themes identified during the literature review. The literature was tabulated according to features and emerging themes. Three major themes were identified and included: the cultural context; the evolving definitions of culture; and culture and psychopathology. Conclusion/discussion. An analysis of the themes was offered. The authors concluded by highlighting the significance of the literature at present. Areas of particular interest suggested that health and behaviour are dependent, at least in part, on culture; psychopathology may also be appreciated as a social construct; culture influences psychopathology regardless of the aetiology; diagnostic classes do not adequately consider operational definitions; and a greater focus on hermeneutic perceptivity in appreciating cultural dynamics in psychopathology will benefit clinical assessment.

  16. MIMO Terminal Performance Evaluation with a Novel Wireless Cable Method

    DEFF Research Database (Denmark)

    Fan, Wei; Kyösti, Pekka; Hentilä, Lassi

    2017-01-01

    chamber, which might be impractical and expensive. In this paper, a novel wireless cable method is proposed and experimentally validated. By recording the average power (i.e. reference signal received power (RSRP) in the LTE) per DUT antenna port and selecting optimal complex weights at the channel...... emulator output ports, a wireless cable connection can be achieved. The proposed method can be executed in a small RF shielded anechoic box, and offers low system cost, high measurement reliability and repeatability....

  17. Alternative Cancer Treatments: 10 Options to Consider

    Science.gov (United States)

    Alternative cancer treatments: 10 options to consider Alternative cancer treatments can't cure your cancer, but they may provide some ... that may help them, including complementary and alternative cancer treatments. If cancer makes you feel as if you ...

  18. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  19. Comparing Consider-Covariance Analysis with Sigma-Point Consider Filter and Linear-Theory Consider Filter Formulations

    Science.gov (United States)

    Lisano, Michael E.

    2007-01-01

    Recent literature in applied estimation theory reflects growing interest in the sigma-point (also called unscented ) formulation for optimal sequential state estimation, often describing performance comparisons with extended Kalman filters as applied to specific dynamical problems [c.f. 1, 2, 3]. Favorable attributes of sigma-point filters are described as including a lower expected error for nonlinear even non-differentiable dynamical systems, and a straightforward formulation not requiring derivation or implementation of any partial derivative Jacobian matrices. These attributes are particularly attractive, e.g. in terms of enabling simplified code architecture and streamlined testing, in the formulation of estimators for nonlinear spaceflight mechanics systems, such as filter software onboard deep-space robotic spacecraft. As presented in [4], the Sigma-Point Consider Filter (SPCF) algorithm extends the sigma-point filter algorithm to the problem of consider covariance analysis. Considering parameters in a dynamical system, while estimating its state, provides an upper bound on the estimated state covariance, which is viewed as a conservative approach to designing estimators for problems of general guidance, navigation and control. This is because, whether a parameter in the system model is observable or not, error in the knowledge of the value of a non-estimated parameter will increase the actual uncertainty of the estimated state of the system beyond the level formally indicated by the covariance of an estimator that neglects errors or uncertainty in that parameter. The equations for SPCF covariance evolution are obtained in a fashion similar to the derivation approach taken with standard (i.e. linearized or extended) consider parameterized Kalman filters (c.f. [5]). While in [4] the SPCF and linear-theory consider filter (LTCF) were applied to an illustrative linear dynamics/linear measurement problem, in the present work examines the SPCF as applied to

  20. Seeing Beyond the Painting Surface with Terahertz Time-Domain Imaging (THz-TDI): a signal separation method for extracting images of buried individual layers in paintings

    DEFF Research Database (Denmark)

    Filtenborg, Troels Folke; Skou-Hansen, Jakob; Koch Dandolo, Corinna Ludovica

    2015-01-01

    and denoising methods used to resolve temporal features of THz reflected signals, they result impractical if applied to large images analysis. Therefore, we presented a simple, fast and effective method to separate single THz pulses of interest from the entire signal recorded at each spatial coordinate...

  1. Dynamic Analysis of Rotor Systems Considering Ball Bearing Contact Mechanism

    International Nuclear Information System (INIS)

    Kim, Youngjin; Lee, Jongmahn; Oh, Dongho

    2013-01-01

    We propose a finite element modeling method considering the ball bearing contact mechanism, and the developed method was verified through experimental and analytical results of inner and outer race-type rotor systems. A comparison of the proposed method with conventional method reveals that there is little difference in the results of the inner race-type rotor system, but there are considerable differences in the results of the outer race-type rotor system such that predictions of greater accuracy can be made. Therefore, the proposed method can be used for accurately predicting the dynamic characteristics of an outer race-type rotary machine

  2. Distributed energy resources scheduling considering real-time resources forecast

    DEFF Research Database (Denmark)

    Silva, M.; Sousa, T.; Ramos, S.

    2014-01-01

    grids and considering day-ahead, hour-ahead and realtime time horizons. This method considers that energy resources are managed by a VPP which establishes contracts with their owners. The full AC power flow calculation included in the model takes into account network constraints. In this paper......, distribution function errors are used to simulate variations between time horizons, and to measure the performance of the proposed methodology. A 33-bus distribution network with large number of distributed resources is used....

  3. Factors to Consider When Designing Television Pictorials

    Science.gov (United States)

    Trohanis, Pascal; Du Monceau, Michael

    1971-01-01

    The authors have developed a framework for improving the visual communication element of television. After warning that seeing is not enough to insure learning they discuss the five pre-production components which research indicates should be considered when designing television pictorials." (Editor)

  4. Considering Bilingual Dictionaries Against a Corpus.

    African Journals Online (AJOL)

    The research reported on here was made possible by the Research Fund of the .... has this meaning, CONSIDER is followed by a that-clause (6). The patterns exemplified in (7) and (8) are rarer. (7) is an example of free direct speech and.

  5. 40 CFR 227.21 - Uses considered.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Uses considered. 227.21 Section 227.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE... living marine resources; (k) Actual or anticipated exploitation of non-living resources, including...

  6. 40 CFR 227.18 - Factors considered.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Factors considered. 227.18 Section 227.18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR... in the material of any constituents which might significantly affect living marine resources of...

  7. Locational Prices in Capacity Subscription Market Considering Transmission Limitations

    Directory of Open Access Journals (Sweden)

    S. Babaeinejad Sarookolaee

    2013-06-01

    Full Text Available This study focuses on one of the most effective type of capacity markets named Capacity Subscription (CS market which is predicted to be widely used in the upcoming smart grids. Despite variant researches done about the mechanism and structure of capacity markets, their performances have been rarely tested in the presence of network constraints. Considering this deficiency, we tried to propose a new method to determine capacity prices in the network considering the transmission line flow limitations named Local capacity Prices (LP. This method is quite new and has not been tried before in any other similar researches. The philosophy of the proposed method is to determine capacity prices considering each consumer share of total peak demand. The first advantage of LP is that the consumers who benefit from the transmission facilities and are the responsible for transmission congestions, pay higher capacity prices than those whom their needed electricity is prepared locally. The second advantage of LP is that consumers connected to the same bus do not have to pay same capacity price due to their different shares of total peak demand. For more clarification, two other different methods named Branches Flow limit as a Global Limit (BFGL and Locational Capacity Prices (LCP are proposed and compared to the LP method in order to show LP method efficiency. The numerical results obtained from case studies show that the LP method follows more justice market procedure which results in more efficient capacity prices in comparison to BFGL and LCP methods.

  8. Total Site Heat Integration Considering Pressure Drops

    Directory of Open Access Journals (Sweden)

    Kew Hong Chew

    2015-02-01

    Full Text Available Pressure drop is an important consideration in Total Site Heat Integration (TSHI. This is due to the typically large distances between the different plants and the flow across plant elevations and equipment, including heat exchangers. Failure to consider pressure drop during utility targeting and heat exchanger network (HEN synthesis may, at best, lead to optimistic energy targets, and at worst, an inoperable system if the pumps or compressors cannot overcome the actual pressure drop. Most studies have addressed the pressure drop factor in terms of pumping cost, forbidden matches or allowable pressure drop constraints in the optimisation of HEN. This study looks at the implication of pressure drop in the context of a Total Site. The graphical Pinch-based TSHI methodology is extended to consider the pressure drop factor during the minimum energy requirement (MER targeting stage. The improved methodology provides a more realistic estimation of the MER targets and valuable insights for the implementation of the TSHI design. In the case study, when pressure drop in the steam distribution networks is considered, the heating and cooling duties increase by 14.5% and 4.5%.

  9. Economical evaluation of electricity generation considering externalities

    International Nuclear Information System (INIS)

    El-Kordy, M.N.; Badr, M.A.; Abed, K.A.; Ibrahim, Said M.A.

    2002-01-01

    The economics of renewable energy are the largest barrier to renewable penetration. Nevertheless, the strong desire to reduce environmental emissions is considered a great support for renewable energy sources. In this paper, a full analysis for the cost of the kWh of electricity generated from different systems actually used in Egypt is presented. Also renewable energy systems are proposed and their costs are analyzed. The analysis considers the external cost of emissions from different generating systems. A proposed large scale PV plant of 3.3 MW, and a wind farm 11.25 MW grid connected at different sites are investigated. A life cycle cost analysis for each system was performed using the present value criterion. The comparison results showed that wind energy generation has the lowest cost, followed by a combined cycle-natural gas fired system. A photovoltaic system still uses comparatively expensive technology for electricity generation; even when external costs are considered the capital cost of photovoltaic needs to be reduced by about 60% in order to be economically competitive. (Author)

  10. Resonance integral analytical calculation considering shadowing effect

    International Nuclear Information System (INIS)

    Monteiro, M.A.M.; Martinez, A.S.

    1990-01-01

    It is presented a method for the Resonance Integral Calculation in the fuel and moderator regions, including the shadowing effect. This effect appears due to the presence of several fuel rods in a infinite moderator region. The method is based on the approximations to the J (ξ, β) function and theirs partial derivatives in relation to β. The dependence of the Resonance Integral in the J (ξ, β) comes from the rational approximation to the neutron escape probability. The final results were obtained in a very simple and fast way, and they show the good accuracy of the method. (author)

  11. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  12. Splenosis: a diagnosis to be considered

    Directory of Open Access Journals (Sweden)

    Jorge C. Ribeiro

    2006-12-01

    Full Text Available The term splenosis applies to the autotransplanted splenic tissue resulting from seeding in the context of past splenic trauma or surgery. We report a 42-year-old man with a history of splenectomy observed for an incidentally found retrovesical mass thought to be an ectopic testicle. The abdominal laparotomy revealed multiple focuses of pelvic splenosis. As splenosis can be diagnosed through specific imaging studies one should always consider it in differential diagnosis of a mass discovered years after splenic surgery or trauma.

  13. What to Consider for Animal Research

    Science.gov (United States)

    2016-10-27

    FROM: 59 MDW/SGVU SUBJECT: Professional Presentation Approval 14 NOV 2016 1. Your paper, entitled What to Consider for Animal Research presented at...for Animal Research 7 FUNDING RECEIVED FOR THIS STUDY? D YES [8I NO FUNDING SOURCE 8 DO YOU NEED FUNDING SUPPORT FOR PUBLICATION PURPOSES: 0 YES [81...a Pnmary/Corresponding Author Ann<.’kc C. Bush GS-14 59 MDW/ ST/SGVUS b c d e. f I CERTIFY ANY HUMAN OR ANIMAL RESEARCH RELATED STUDIES WERE

  14. Quality factors to consider in condensate selection

    Energy Technology Data Exchange (ETDEWEB)

    Lywood, B. [Crude Quality Inc., Edmonton, AB (Canada)

    2009-07-01

    Many factors must be considered when assessing the feasibility of using condensates as a diluent for bitumen or heavy crude production blending. In addition to commercial issues, the effect of condensate quality is a key consideration. In general, condensate quality refers to density and viscosity. However, valuation decisions could be enhanced through the expansion of quality definitions and understanding. This presentation focused on the parameters that are important in choosing a diluent grade product. It also reviewed pipeline and industry specifications and provided additional information regarding general properties for bitumen and condensate compatibility; sampling and quality testing needs; and existing sources of information regarding condensate quality. tabs., figs.

  15. Reliability evaluation of microgrid considering incentive-based demand response

    Science.gov (United States)

    Huang, Ting-Cheng; Zhang, Yong-Jun

    2017-07-01

    Incentive-based demand response (IBDR) can guide customers to adjust their behaviour of electricity and curtail load actively. Meanwhile, distributed generation (DG) and energy storage system (ESS) can provide time for the implementation of IBDR. The paper focus on the reliability evaluation of microgrid considering IBDR. Firstly, the mechanism of IBDR and its impact on power supply reliability are analysed. Secondly, the IBDR dispatch model considering customer’s comprehensive assessment and the customer response model are developed. Thirdly, the reliability evaluation method considering IBDR based on Monte Carlo simulation is proposed. Finally, the validity of the above models and method is studied through numerical tests on modified RBTS Bus6 test system. Simulation results demonstrated that IBDR can improve the reliability of microgrid.

  16. A survey about methods dedicated to epistasis detection

    Directory of Open Access Journals (Sweden)

    Clément eNiel

    2015-09-01

    Full Text Available During the past decade, findings of genome-wide association studies (GWAS improved our knowledge and understanding of disease genetics. To date, thousands of SNPs have been associated to diseases and other complex traits. Statistical analysis typically looks for association between a phenotype and a SNP taken individually via single-locus tests. However, geneticists admit this is an oversimplified approach to tackle the complexity of underlying biological mechanisms. Interaction between SNPs, namely epistasis, must be considered. Unfortunately, epistasis detection gives rise to analytic challenges since analyzing every SNP combination is at present impractical at a genome-wide scale. In this review, we will present the main strategies recently proposed to detect epistatic interactions, along with their operating principle. Some of these methods are exhaustive, such as multifactor dimensionality reduction, likelihood ratio-based tests or receiver operating characteristic curve analysis; some are non-exhaustive, such as machine learning techniques (random forests, Bayesian networks or combinatorial optimization approaches (ant colony optimization, computational evolution system.

  17. EURATOM. Considered from an economic perspective

    International Nuclear Information System (INIS)

    Balke, Siegfried

    2015-01-01

    The European Atomic Energy Community (EAG-EURATOM), which was organisationally established on 1st January 1958, is not to the same degree part of an economic discussion as the European Economic Community. The EAG has a strongly accentuated technical-scientific character and is often economically considered as appendix of major economic integration efforts within Europe. Still it would be wrong not to suspect economical effective components within the European Atomic Energy Community. The opposite is already recognisable as the EAG needs to integrate itself into a system of international organisations and institutions, which are already existent in the field of a friendly exploitation of nuclear power and which embrace a larger geographical field as the six - member-states of the EURATOM, the European Economic Community and the European Coal and Steel Community. One advantage of the treaty on establishing the European community is that it considers the Atomic Energy Community as an important but not independent branch from general economic activity. The organisational bracket for all three European Treaties of Integration will be the common Parliament and - what is to be expected, in its practical impact a -not to be underestimated- joint headquarters for all three institutions.

  18. Counselling women considering or seeking sterilization.

    Science.gov (United States)

    Jackson, T

    1980-12-01

    The view of counseling as assessment and advice-giving places unrealistic and unnecessary stresses on both counselor and client. The counselor-doctor feels responsible for client's subsequent happiness in life and feels guilty if his advice leads to future unhappiness for her. The client feels powerless in the decision-making process and has less incentive to take full responsibility for the direction of her life. A review of studies of emotional adjustment to sterilization revealed a lack of clearly defined goals for preoperative counseling and the failure to test in any way the effect of different models of counseling on client outcome. Issues which might be raised with a woman considering sterilization may be grouped into 4: 1) the woman's life situation; 2) her reasons for considering sterilization; 3) timing; and 4) ambivalence. Counselors should be prepared for and comfortable with the expression of emotion in counseling sessions. Counselors who themselves are unable to cope with expression of intense emotion will send conflicting messages to clients, both giving permission for and disapproving of exploration of certain levels of feeling. The concept of 'regret' as an outcome measure should be refined.

  19. Cordon Pricing Considering Air Pollutants Emission

    Directory of Open Access Journals (Sweden)

    Shahriar Afandizadeh

    2016-04-01

    Full Text Available This paper considers the issue of air pollutants emission for the optimal and sustainable determination of cordon location, toll level, and price of park and ride (P&R. Although air pollutants emission decreases within the cordon by the implementation of cordon pricing scheme, it may increase outside the cordon and the whole network. Hence, air pollutants emission may only transfer from inside of the cordon to its outside. Therefore, in this paper, a multi-objective bi-level optimization model is developed. A solution algorithm is also presented based on the second version of strength Pareto evolutionary algorithm (SPEA2. The results reveal that this multi-objective model can be a useful tool for the sustainable and optimal design of the cordon and P&R scheme. In addition, cordon pricing is a multi-objective problem. Therefore, it is necessary to consider air pollutants emission. By choosing another non-dominated result in the solution space, air pollutants emission outside the cordon and the whole network can be reduced without a significant reduction in social welfare.

  20. Incidence of infective endocarditis among patients considered at high risk

    DEFF Research Database (Denmark)

    Østergaard, Lauge; Valeur, Nana; Ihlemann, Nikolaj

    2018-01-01

    Aims: Patients with prior infective endocarditis (IE), a prosthetic heart valve, or a cyanotic congenital heart disease (CHD) are considered to be at high risk of IE by guidelines. However, knowledge is sparse on the relative risk of IE between these three groups and compared controls. Methods...

  1. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  2. Considering Resilience: Steps Towards an Assessment Framework

    Directory of Open Access Journals (Sweden)

    James Kallaos

    2014-04-01

    Full Text Available As threats from climate change related hazards increase in cities around the world, communities are faced with an urgent requirement for self-evaluation. It is essential to expose and assess potential hazards facing cities, as well as to consider potential impacts and responses. While the promotion of efficiency and promise of protection have been common approaches to hazards in the past, recent events have exposed weaknesses in existing tactics. It has also become more apparent that existing mitigation efforts will be insufficient to prevent some level of climate change, associated hazards, and impacts. Complete protection against all threats is not only impossible but potentially hazardous, as extreme or unanticipated events can exceed the capacity for defence, potentially resulting in catastrophic failures. From this realization of the fallibility of the existing paradigm, resilience has emerged as a useful concept for framing the response of cities to an expanding collection of potential threats. The aim of this article is to consider resilience as it applies to cities, their architecture and infrastructure systems, subsystems, and components, as well as their inhabitants. Resilience characteristics are identified and considered in order to inform the eventual development of a resilience framework with which to assess architecture and infrastructure resilience. This state of the art is instrumental to determine the conditions under which architecture and infrastructure resilience can be defined and measured, in order to guide the consideration of attributes and determine suitable criteria to select and elaborate indicators to help guide future actions and investments.   Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm

  3. Wind Power Prediction Considering Nonlinear Atmospheric Disturbances

    Directory of Open Access Journals (Sweden)

    Yagang Zhang

    2015-01-01

    Full Text Available This paper considers the effect of nonlinear atmospheric disturbances on wind power prediction. A Lorenz system is introduced as an atmospheric disturbance model. Three new improved wind forecasting models combined with a Lorenz comprehensive disturbance are put forward in this study. Firstly, we define the form of the Lorenz disturbance variable and the wind speed perturbation formula. Then, different artificial neural network models are used to verify the new idea and obtain better wind speed predictions. Finally we separately use the original and improved wind speed series to predict the related wind power. This proves that the corrected wind speed provides higher precision wind power predictions. This research presents a totally new direction in the wind prediction field and has profound theoretical research value and practical guiding significance.

  4. Considering a possible future for Digital Journalism

    Directory of Open Access Journals (Sweden)

    Mark DEUZE

    2017-01-01

    Full Text Available Developments shaping digital journalism seem to speeding up at the start of the 21st century. Social media enable radical new ways to gather and verify sources and information. Hardware and software power innovative storytelling formats, combining platforms and channels, adding interactivity to the news experience. And the global news industry is quickly becoming a networked industry, with startups and other forms of entrepreneurial journalism springing up all over the world. In this essay, I consider a possible future for digital journalism by briefly reviewing first findings from a series of case studies of 21 new small-sized journalism enterprises operating in 11 countries (spread across 5 continents. The overarching research question: seen through their eyes, what does the future of (digital journalism look like? The answers are hopeful.

  5. Fatigue management considering LWR coolant environments

    International Nuclear Information System (INIS)

    Park, Heung Bae; Jin, Tae eun

    2000-01-01

    Design fatigue curve for structural material in the ASME Boiler and Pressure Vessel Code do not explicitly address the effects of reactor coolant environments on fatigue life. Environmentally assisted cracking (EAC) of low-alloy steels in light water reactor (LWR) coolant environments has been a concern ever since the early 1970's. And, recent fatigue test data indicate a significant decrease in fatigue lives of carbon steels, low-alloy steels and austenitic stainless steels in LWR coolant environments. For these reasons, fatigue of major components has been identified as a technical issue remaining to be resolved for life management and license renewal of nuclear power plants. In the present paper, results of recent investigations by many organizations are reviewed to provide technical justification to support the development of utility approach regarding the management of fatigue considering LWR coolant environments for the purpose of life management and license renewal of nuclear power plants. (author)

  6. PROJECT MANAGEMENT CONSIDERED IN A 2014 PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    GRAPĂ ADELINA-ROXANA

    2014-05-01

    Full Text Available Project Management has come of age, yet multiple surveys and reports confirm the fact that the majority of projects are challenged. Given the more demanding and strict financial constraints associated with the current fiscal climate, project management is regarded as a tool that can deliver more with less. The literature on Project Management shows that, in spite of advancement in Project Management processes, tools and systems, project success has not significantly improved. This problem raises questions about the value and effectiveness of Project Management and Project Management systems. Programs and projects are considered as strategic assets for the majority of businesses, therefore, the trend of these organizations is to embrace a management by projects culture. The main objective of Project Management nowadays is to ensure programs and projects aligned to a certain strategy and also to provide for every member of an organization the ability to take proactive actions creating additional benefits.

  7. VVER-1000: considering its strengths and weaknesses

    International Nuclear Information System (INIS)

    Laaksonen, J.

    1994-01-01

    The safety of currently operating VVER-1000 reactors is examined. The factors considered are deviations in operation, inherent safety, safety system design, protection against internal and external hazards, equipment quality, the approach to plant operations and the safety culture. On the basis of this evaluation it is concluded that the overall safety of a VVER-1000 cannot be at the level of a modern Western PWR though there is no sound basis to make a quantitative comparison. Many of the concerns raised are being adequately addressed in the Czech Temelin which is currently under construction and in new designs which are still at the drawing board stage. Extensive back fitting programmes are planned or underway in operating plants. The creation of independent responsible operating organizations, powerful regulation and an improved economic situation are advanced as necessary criteria for real improvements in safety. (UK)

  8. Quality assurance for fittings considering nuclear technology

    International Nuclear Information System (INIS)

    Kilian, H.J.

    1987-01-01

    Negative experience made during World War II led to the idea of quality assurance being born in the United States. Thoroughly misunderstood, it came to be incorporated in European mechanical engineering. Quality assurance there was initially considered to be a new term for the oganizational combination of all parts of an enterprise dealing with testing. German manufacturers of heavy-duty and safety fittings represented in the international market were compelled at a relatively early date to properly understand and realize a quality assurance programme. But the multi-fariousness of specifications to be applied and great number of the most different parts made eminent demands on the suitability and variability of the products developed. On the basis of 18 quality criteria the article describes the structure of 'quality' and what its consequences are for an effective quality assurance system - suited for all kinds of specifications. (orig.) [de

  9. Sources of the Radio Background Considered

    Energy Technology Data Exchange (ETDEWEB)

    Singal, J.; /KIPAC, Menlo Park /Stanford U.; Stawarz, L.; /KIPAC, Menlo Park /Stanford U. /Jagiellonian U., Astron. Observ.; Lawrence, A.; /Edinburgh U., Inst. Astron. /KIPAC, Menlo Park /Stanford U.; Petrosian, V.; /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.

    2011-08-22

    We investigate possible origins of the extragalactic radio background reported by the ARCADE 2 collaboration. The surface brightness of the background is several times higher than that which would result from currently observed radio sources. We consider contributions to the background from diffuse synchrotron emission from clusters and the intergalactic medium, previously unrecognized flux from low surface brightness regions of radio sources, and faint point sources below the flux limit of existing surveys. By examining radio source counts available in the literature, we conclude that most of the radio background is produced by radio point sources that dominate at sub {mu}Jy fluxes. We show that a truly diffuse background produced by elections far from galaxies is ruled out because such energetic electrons would overproduce the observed X-ray/{gamma}-ray background through inverse Compton scattering of the other photon fields. Unrecognized flux from low surface brightness regions of extended radio sources, or moderate flux sources missed entirely by radio source count surveys, cannot explain the bulk of the observed background, but may contribute as much as 10%. We consider both radio supernovae and radio quiet quasars as candidate sources for the background, and show that both fail to produce it at the observed level because of insufficient number of objects and total flux, although radio quiet quasars contribute at the level of at least a few percent. We conclude that the most important population for production of the background is likely ordinary starforming galaxies above redshift 1 characterized by an evolving radio far-infrared correlation, which increases toward the radio loud with redshift.

  10. Adult Siblings Consider the Future: Emergent Themes

    Science.gov (United States)

    Davys, Deborah; Mitchell, Duncan; Haigh, Carol

    2016-01-01

    Background: This study aimed to explore the perceptions of adult siblings regarding a future care role and compare with perceived parental wishes as family often provide a key support role in the lives of people who have an intellectual disability. Materials and Method: Semi-structured interviews were undertaken with 15 adult siblings and an…

  11. On process optimization considering LCA methodology.

    Science.gov (United States)

    Pieragostini, Carla; Mussati, Miguel C; Aguirre, Pío

    2012-04-15

    The goal of this work is to research the state-of-the-art in process optimization techniques and tools based on LCA, focused in the process engineering field. A collection of methods, approaches, applications, specific software packages, and insights regarding experiences and progress made in applying the LCA methodology coupled to optimization frameworks is provided, and general trends are identified. The "cradle-to-gate" concept to define the system boundaries is the most used approach in practice, instead of the "cradle-to-grave" approach. Normally, the relationship between inventory data and impact category indicators is linearly expressed by the characterization factors; then, synergic effects of the contaminants are neglected. Among the LCIA methods, the eco-indicator 99, which is based on the endpoint category and the panel method, is the most used in practice. A single environmental impact function, resulting from the aggregation of environmental impacts, is formulated as the environmental objective in most analyzed cases. SimaPro is the most used software for LCA applications in literature analyzed. The multi-objective optimization is the most used approach for dealing with this kind of problems, where the ε-constraint method for generating the Pareto set is the most applied technique. However, a renewed interest in formulating a single economic objective function in optimization frameworks can be observed, favored by the development of life cycle cost software and progress made in assessing costs of environmental externalities. Finally, a trend to deal with multi-period scenarios into integrated LCA-optimization frameworks can be distinguished providing more accurate results upon data availability. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Considering the determination of an alpha value

    International Nuclear Information System (INIS)

    Lorenz, B.

    1987-01-01

    Following an outline of the most important international methods of evaluating an alpha value (the monetary equivalent of one man-sievert) and an approach deemed suitable for use in the GDR, it is recommended that alpha be taken as 30,000 Mark per man-sievert in national cost-benefit analyses. This value should be revisited every five to ten years. (author)

  13. Warranty claim analysis considering human factors

    International Nuclear Information System (INIS)

    Wu Shaomin

    2011-01-01

    Warranty claims are not always due to product failures. They can also be caused by two types of human factors. On the one hand, consumers might claim warranty due to misuse and/or failures caused by various human factors. Such claims might account for more than 10% of all reported claims. On the other hand, consumers might not be bothered to claim warranty for failed items that are still under warranty, or they may claim warranty after they have experienced several intermittent failures. These two types of human factors can affect warranty claim costs. However, research in this area has received rather little attention. In this paper, we propose three models to estimate the expected warranty cost when the two types of human factors are included. We consider two types of failures: intermittent and fatal failures, which might result in different claim patterns. Consumers might report claims after a fatal failure has occurred, and upon intermittent failures they might report claims after a number of failures have occurred. Numerical examples are given to validate the results derived.

  14. Term Croatian considered in russian context

    Directory of Open Access Journals (Sweden)

    Željka Čelić

    2008-01-01

    Full Text Available Term Croatian is considered in Russian context, i. e. context of Russian scientific material (which is comparable to the unwritten situation in universities. Russian scientific texts connect term Croatian, almost without an exception, with the term Serbian in words such as Serbo-Croatian. This point of view is politically approved in the period untill 1990’s, but it exists in the 21st century’s scientific material. The nature of the problem lays, at the same time, in politics, language and society; thus, the question is: what is the reason of such a context in which Croatian language is placed now? There are no arguments for it, especially if it is for Slovak language politically based and language approved to be an entity – in comparison to the Czech language; for Ukrainian (once Littlerussian – at least in principle, in comparison to the Russian, or, more convincable, Belorussian to Russian (the standard Belorussian language exists from 1905. The term Croatian is independently, even in new books, connected with terms of soil, state, nation, but not language. And though today, because of political reasons, exists an awareness of Croatian language without its Serbian mirror reflexion, the term Serbo-Croatian stays. Thus, this paper looks through the history concerning Croatian language in 19, 20 and 21st century’s Russian philology, including Juraj Križanić and Vatroslav Jagić – innovators of the Croatian word in Russia.

  15. Dose assessment considering evolution of the biosphere

    International Nuclear Information System (INIS)

    Karlsson, Sara; Bergstroem, Ulla

    2002-01-01

    Swedish Nuclear Fuel and Waste Management AB (SKB) is presently updating the safety assessment for SFR (Final repository for radioactive operational waste) in Sweden. The bio-spheric part of the analysis is performed by Studsvik Eco and Safety AB. According to the regulations the safety of the repository has to be accounted for different possible courses of the development of the biosphere. A number of studies have been carried out during the past years to investigate and document the biosphere in the area surrounding the repository. Modelling of shore-level displacement by land uplift, coastal water exchange and sedimentation have provided data for prediction of the evolution of the area. The prediction is done without considering a future change in climatic conditions. The results from this study show that accumulation of radionuclides in sediments is an important process to simulate when performing dose assessments covering biosphere evolution. The dose calculated for the first years of the period with agricultural use of the contaminated sediments may be severely underestimated in a scenario with large accumulation in coastal and lake stages. (LN)

  16. Calorie restriction in rodents: Caveats to consider.

    Science.gov (United States)

    Ingram, Donald K; de Cabo, Rafael

    2017-10-01

    The calorie restriction paradigm has provided one of the most widely used and most useful tools for investigating mechanisms of aging and longevity. By far, rodent models have been employed most often in these endeavors. Over decades of investigation, claims have been made that the paradigm produces the most robust demonstration that aging is malleable. In the current review of the rodent literature, we present arguments that question the robustness of the paradigm to increase lifespan and healthspan. Specifically, there are several questions to consider as follows: (1) At what age does CR no longer produce benefits? (2) Does CR attenuate cognitive decline? (3) Are there negative effects of CR, including effects on bone health, wound healing, and response to infection? (4) How important is schedule of feeding? (5) How long does CR need to be imposed to be effective? (6) How do genotype and gender influence CR? (7) What role does dietary composition play? Consideration of these questions produce many caveats that should guide future investigations to move the field forward. Published by Elsevier B.V.

  17. Considering clay rock heterogeneity in radionuclide retention

    International Nuclear Information System (INIS)

    Grambow, B.; Montavon, G.; Tournassat, C.; Giffaut, E.; Altmann, S.

    2010-01-01

    Document available in extended abstract form only. The Callovo-Oxfordian clay rock formation has a strong retention capacity for radionuclides, a favorable condition for the implementation of a nuclear waste repository. Principal retaining minerals are illite, and inter-stratified illite/smectite (I/S). Radionuclide retention has been studied on illite, illite/smectite and on clay rock obtained from different locations and data for retention on bentonite (80% smectite) are available. Sorption depends on the type of mineral, composition of mineralogical assemblages, individual mineral ion exchange capacities, ion distribution on exchange sites, specific surface areas, surface site types and densities for surface complexation as well as on water/rock ratios, temperature etc. As a consequence of mineralogical and textural variations, radionuclide retention properties are expected to vary with depth in the Callovo-Oxfordian formation. Using a simple additivity approach for the case of sorption of Cs and Ni it is shown that models and databases for illite and bentonite can be used to describe sorption in heterogeneous clay rock systems. A surface complexation/ion-exchange model as proposed by Bradbury and Baeyens without electrostatic contributions, was used directly as far as acid base properties are concerned but was modified with respect to sorption constants, in order to describe Na-, Ca, and Cs montmorillonite and bentonite MX-80 with a single set of surface complexation constants and also to account for carbonate and sulphate concentrations in groundwater. The model is integrated into the geochemical code PHREEQC considering dissolution/ precipitation/solubility constraints of accessory minerals (calcite, illite, celestite, quartz). Site densities for surface complexation and ion exchange are derived from the mass fractions of illite and of smectite in illite/smectite obtained from an overall fit of measured CEC data from all samples of the EST205 drill core

  18. Considering FACTS in Optimal Transmission Expansion Planning

    Directory of Open Access Journals (Sweden)

    K. Soleimani

    2017-10-01

    Full Text Available The expansion of power transmission systems is an important part of the expansion of power systems that requires enormous investment costs. Since the construction of new transmission lines is very expensive, it is necessary to choose the most efficient expansion plan that ensures system security with a minimal number of new lines. In this paper, the role of Flexible AC Transmission System (FACTS devices in the effective operation and expansion planning of transmission systems is examined. Effort was taken to implement a method based on sensitivity analysis to select the optimal number and location of FACTS devices, lines and other elements of the transmission system. Using this method, the transmission expansion plan for a 9 and a 39 bus power system was performed with and without the presence of FACTS with the use of DPL environment in Digsilent software 15.1. Results show that the use of these devices reduces the need for new transmission lines and minimizes the investment cost.

  19. Generation of equipment response spectrum considering equipment-structure interaction

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Yoo, Kwang Hoon

    2005-01-01

    Floor response spectra for dynamic response of subsystem such as equipment, or piping in nuclear power plant are usually generated without considering dynamic interaction between main structure and subsystem. Since the dynamic structural response generally has the narrow-banded shapes, the resulting floor response spectra developed for various locations in the structure usually have high spectral peak amplitudes in the narrow frequency bands corresponding to the natural frequencies of the structural system. The application of such spectra for design of subsystems often leads to excessive design conservatisms, especially when the equipment frequency and structure are at resonance condition. Thus, in order to provide a rational and realistic design input for dynamic analysis and design of equipment, dynamic equipment-structure interaction (ESI) should be considered in developing equipment response spectrum which is particularly important for equipment at the resonance condition. Many analytical methods have been proposed in the past for developing equipment response spectra considering ESI. However, most of these methods have not been adapted to the practical applications because of either the complexities or the lack of rigorousness of the methods. At one hand, mass ratio among the equipment and structure was used as an important parameter to obtain equipment response spectra. Similarly, Tseng has also proposed the analytical method for developing equipment response spectra using mass ratio in the frequency domain. This method is analytically rigorous and can be easily validated. It is based on the dynamic substructuring method as applied to the dynamic soil-structure interaction (SSI) analysis, and can relatively easily be implemented for practical applications without to change the current dynamic analysis and design practice for subsystems. The equipment response spectra derived in this study are also based on Tseng's proposed method

  20. CALCULATION OF INITIALS OPTIMAL PRODUCTION CAPACITIES CONSIDERING UNCERTAINTY ELEMENTS

    Directory of Open Access Journals (Sweden)

    Hilda Oquendo Ferrer

    2016-04-01

    Full Text Available In diversification, an attractive variant constitutes the projection of ethanol plants due to all the advantages that this represents and a crucial element for this to be effective is the existence of cane as a fundamental raw material for the sugar industry and therefore the derived productions. To project the initials optimal capacity of the plant, uncertainty in the raw material was considered. Mathematical models of capacity in time are obtained, choosing those that best fit, being the linear the simplest for future calculations. The initial capacity the plant should have is determined, also the time at which the first extension and the capacity of the plant should be done, which allows, considering other criteria, to make decisions about what should be the capacity of an ethanol plant in response to the current and future availability of sugar cane. It is presented a general method that can be used considering other tax sugar companies in a province or a region.

  1. Comportamento do método quimioluminescente-ELISA em relação a resultados considerados discordantes por meio de três técnicas convencionais para diagnóstico da doença de Chagas Behavior of the chemiluminescent ELISA method in relation to results considered discordant via three conventional techniques for diagnosing Chagas disease

    Directory of Open Access Journals (Sweden)

    Cláudia Regina De Marchi

    2007-02-01

    Full Text Available Quando utilizadas, em conjunto, a hemaglutinação indireta, a imunofluorescência indireta e ELISA para diagnóstico sorológico da doença de Chagas por vezes ocorrem resultados considerados discordantes, por não haver concordância entre o que indicam essas técnicas. A disponibilidade do método quimioluminescente-ELISA permitiu executá-lo com 200 soros que examinados pelos três testes citados que motivaram a obtenção de resultados discordantes. Com o método quimioluminescente-ELISA sucederam 193 negativos e sete positivos. O emprego desse novo procedimento trouxe mais um subsídio para compreensão do assunto, mas avanço mais concreto dependerá de documentação com soros de pessoas infectadas ou não pelo Trypanosoma cruzi conforme comprovação parasitológica.When indirect hemagglutination, indirect immunofluorescence and enzyme-linked immunosorbent assay are used together for serologically diagnosing Chagas disease, results that are considered discordant sometimes occur because there is disagreement between what these tests indicate. The availability of the chemiluminescent ELISA method enabled tests on 200 serum samples that had previously produced discordant results from the three abovementioned methods. CL-ELISA revealed that 193 of these samples were negative and seven were positive. The use of this new procedure provides further support for understanding this subject, but more concrete advances will depend on documentation with blood analyses from people previously demonstrated to be unquestionably infected or uninfected with Trypanosoma cruzi.

  2. Techno-economic analysis of biofuel production considering logistic configurations.

    Science.gov (United States)

    Li, Qi; Hu, Guiping

    2016-04-01

    In the study, a techno-economic analysis method considering logistic configurations is proposed. The economic feasibility of a low temperature biomass gasification pathway and an integrated pathway with fast pyrolysis and bio-oil gasification are evaluated and compared with the proposed method in Iowa. The results show that both pathways are profitable, biomass gasification pathway could achieve an Internal Rate of Return (IRR) of 10.00% by building a single biorefinery and integrated bio-oil gasification pathway could achieve an IRR of 3.32% by applying decentralized supply chain structure. A Monte-Carlo simulation considering interactions among parameters is also proposed and conducted, which indicates that both pathways are at high risk currently. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Successful aging: considering non-biomedical constructs

    Directory of Open Access Journals (Sweden)

    Carver LF

    2016-11-01

    Full Text Available Lisa F Carver,1 Diane Buchanan2 1Department of Sociology, Queen’s University Kingston, ON, Canada; 2School of Nursing, Queen’s University Kingston, ON, Canada Objectives: Successful aging continues to be applied in a variety of contexts and is defined using a number of different constructs. Although previous reviews highlight the multidimensionality of successful aging, a few have focused exclusively on non-biomedical factors, as was done here. Methods: This scoping review searched Ovid Medline database for peer-reviewed English-language articles published between 2006 and 2015, offering a model of successful aging and involving research with older adults. Results: Seventy-two articles were reviewed. Thirty-five articles met the inclusion criteria. Common non-biomedical constructs associated with successful aging included engagement, optimism and/or positive attitude, resilience, spirituality and/or religiosity, self-efficacy and/or self-esteem, and gerotranscendence. Discussion: Successful aging is a complex process best described using a multidimensional model. Given that the majority of elders will experience illness and/or disease during the life course, public health initiatives that promote successful aging need to employ non-biomedical constructs, facilitating the inclusion of elders living with disease and/or disability. Keywords: successful aging, resilience, gerotranscendence, engagement, optimism

  4. Estimation of the uncertainties considered in NPP PSA level 2

    International Nuclear Information System (INIS)

    Kalchev, B.; Hristova, R.

    2005-01-01

    The main approaches of the uncertainties analysis are presented. The sources of uncertainties which should be considered in PSA level 2 for WWER reactor such as: uncertainties propagated from level 1 PSA; uncertainties in input parameters; uncertainties related to the modelling of physical phenomena during the accident progression and uncertainties related to the estimation of source terms are defined. The methods for estimation of the uncertainties are also discussed in this paper

  5. Assessing Power System Stability Following Load Changes and Considering Uncertainty

    Directory of Open Access Journals (Sweden)

    D. V. Ngo

    2018-04-01

    Full Text Available An increase in load capacity during the operation of a power system usually causes voltage drop and leads to system instability, so it is necessary to monitor the effect of load changes. This article presents a method of assessing the power system stability according to the load node capacity considering uncertainty factors in the system. The proposed approach can be applied to large-scale power systems for voltage stability assessment in real-time.

  6. Internal Dosimetry Intake Estimation using Bayesian Methods

    International Nuclear Information System (INIS)

    Miller, G.; Inkret, W.C.; Martz, H.F.

    1999-01-01

    New methods for the inverse problem of internal dosimetry are proposed based on evaluating expectations of the Bayesian posterior probability distribution of intake amounts, given bioassay measurements. These expectation integrals are normally of very high dimension and hence impractical to use. However, the expectations can be algebraically transformed into a sum of terms representing different numbers of intakes, with a Poisson distribution of the number of intakes. This sum often rapidly converges, when the average number of intakes for a population is small. A simplified algorithm using data unfolding is described (UF code). (author)

  7. A review for pediatricians on limb lengthening and the Ilizarov method.

    Science.gov (United States)

    Herbert, A J; Herzenberg, J E; Paley, D

    1995-02-01

    As recently as 1986, limb lengthening in children was considered by most North American orthopedic surgeons to be both dangerous and impractical. Previous attempts were plagued by unacceptably high rates of serious complications such as nerve palsy, deep infection, malunion, broken hardware, and stiff joints. With the recent introduction of the Russian Ilizarov method and apparatus for limb lengthening, a tremendous groundswell of interest has risen. Despite a steep learning curve, many Western centers have now reproduced Ilizarov's clinical results. The important advances over prior methods are partly biologic and partly hardware related. Ilizarov's principles require a minimally invasive, low-energy osteotomy, stable external fixation, a latency period before commencing distraction, and gradual lengthening of 1 mm/d in divided doses (0.25 mm four times per day). The article reviews the background of this new technique and provides an update on results reported over the past year. There is disagreement regarding precise indications for limb salvage (lengthening) of congenital limb deficiencies versus amputation. The role of extended lengthening in dwarfism also remains controversial.

  8. Congestion management considering voltage security of power systems

    International Nuclear Information System (INIS)

    Esmaili, Masoud; Shayanfar, Heidar Ali; Amjady, Nima

    2009-01-01

    Congestion in a power network is turned up due to system operating limits. To relieve congestion in a deregulated power market, the system operator pays to market participants, GENCOs and DISCOs, to alter their active powers considering their bids. After performing congestion management, the network may be operated with a low security level because of hitting some flows their upper limit and some voltages their lower limit. In this paper, a novel congestion management method based on the voltage stability margin sensitivities is introduced. Using the proposed method, the system operator so alleviates the congestion that the network can more retain its security. The proposed method not only makes the system more secure after congestion management than other methods already presented for this purpose but also its cost of providing security is lower than the earlier methods. Test results of the proposed method along with the earlier ones on the New-England test system elaborate the efficiency of the proposed method from the viewpoint of providing a better voltage stability margin and voltage profile as well as a lower security cost. (author)

  9. CFD analysis of linear compressors considering load conditions

    Science.gov (United States)

    Bae, Sanghyun; Oh, Wonsik

    2017-08-01

    This paper is a study on computational fluid dynamics (CFD) analysis of linear compressor considering load conditions. In the conventional CFD analysis of the linear compressor, the load condition was not considered in the behaviour of the piston. In some papers, behaviour of piston is assumed as sinusoidal motion provided by user defined function (UDF). In the reciprocating type compressor, the stroke of the piston is restrained by the rod, while the stroke of the linear compressor is not restrained, and the stroke changes depending on the load condition. The greater the pressure difference between the discharge refrigerant and the suction refrigerant, the more the centre point of the stroke is pushed backward. And the behaviour of the piston is not a complete sine wave. For this reason, when the load condition changes in the CFD analysis of the linear compressor, it may happen that the ANSYS code is changed or unfortunately the modelling is changed. In addition, a separate analysis or calculation is required to find a stroke that meets the load condition, which may contain errors. In this study, the coupled mechanical equations and electrical equations are solved using the UDF, and the behaviour of the piston is solved considering the pressure difference across the piston. Using the above method, the stroke of the piston with respect to the motor specification of the analytical model can be calculated according to the input voltage, and the piston behaviour can be realized considering the thrust amount due to the pressure difference.

  10. Evaluation of Floor Response Spectrum considering Ductility of Structure

    International Nuclear Information System (INIS)

    Park, Junhee; Choi, In-Kil

    2014-01-01

    The FRS (floor response spectrum) is directly influenced by the behavior of structure under the seismic load. If the structure is nonlinear range, the energy dissipation will be occurred by the damage of structure and the maximum force will be reduced. In Zion method, the inelastic energy abortion factor has been used to consider the nonlinearity of structure. This factor was used for the seismic fragility of structure. For the seismic fragility of equipment, the uncertainty of this factor was used differently according to the story level. But this method is not warranted under the strong earthquake leads to the structural damage. Therefore it is needed to evaluate the FRS considering the nonlinear behavior of structure and to assessment the conservatism related to nonlinear behavior of structure in FRS. In this study, the nonlinear analysis was performed for the conservatism of FRS under the damage of structure. The conservatism of FRS by the nonlinear analysis was compared by that proposed by the Zion method. The conservatism of floor acceleration response for the equipment was evaluated by performing the nonlinear analysis. From the nonlinear analysis results, it was showed that the median and β c of FRSR was increased with the ductility of structure and the response of equipment had the resonance effect between the frequency of equipment and structure. The seismic capacity of equipment by the Zion method can be different from the real seismic capacity of equipment because the inelastic structure response factor has nothing to do with the ductility of structure. Therefore the median and COV for FRSR should be defined considering the ductility of structure and the frequency of equipment for more exactly evaluating the seismic capacity of equipment

  11. Evaluation of Floor Response Spectrum considering Ductility of Structure

    Energy Technology Data Exchange (ETDEWEB)

    Park, Junhee; Choi, In-Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The FRS (floor response spectrum) is directly influenced by the behavior of structure under the seismic load. If the structure is nonlinear range, the energy dissipation will be occurred by the damage of structure and the maximum force will be reduced. In Zion method, the inelastic energy abortion factor has been used to consider the nonlinearity of structure. This factor was used for the seismic fragility of structure. For the seismic fragility of equipment, the uncertainty of this factor was used differently according to the story level. But this method is not warranted under the strong earthquake leads to the structural damage. Therefore it is needed to evaluate the FRS considering the nonlinear behavior of structure and to assessment the conservatism related to nonlinear behavior of structure in FRS. In this study, the nonlinear analysis was performed for the conservatism of FRS under the damage of structure. The conservatism of FRS by the nonlinear analysis was compared by that proposed by the Zion method. The conservatism of floor acceleration response for the equipment was evaluated by performing the nonlinear analysis. From the nonlinear analysis results, it was showed that the median and β{sub c} of FRSR was increased with the ductility of structure and the response of equipment had the resonance effect between the frequency of equipment and structure. The seismic capacity of equipment by the Zion method can be different from the real seismic capacity of equipment because the inelastic structure response factor has nothing to do with the ductility of structure. Therefore the median and COV for FRSR should be defined considering the ductility of structure and the frequency of equipment for more exactly evaluating the seismic capacity of equipment.

  12. Design wave estimation considering directional distribution of waves

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Deo, M.C

    .elsevier.com/locate/oceaneng Technical Note Design wave estimation considering directional distribution of waves V. Sanil Kumar a,C3 , M.C. Deo b a OceanEngineeringDivision,NationalInstituteofOceanography,Donapaula,Goa-403004,India b Civil... of Physical Oceanography Norway, Report method for the routine 18, 1020–1034. ocean waves. Division of No. UR-80-09, 187 p. analysis of pitch and roll Conference on Coastal Engineering, 1. ASCE, Taiwan, pp. 136–149. Deo, M.C., Burrows, R., 1986. Extreme wave...

  13. An approach to routine individual internal dose monitoring at the object 'Shelter' personnel considering uncertainties

    International Nuclear Information System (INIS)

    Mel'nichuk, D.V.; Bondarenko, O.O.; Medvedjev, S.Yu.

    2002-01-01

    An approach to organisation of routine individual internal dose monitoring of the personnel of the Object 'Shelter' is presented in the work, that considers individualised uncertainties. In this aspect two methods of effective dose assessment based on bioassay are considered in the work: (1) traditional indirect method at which application results of workplace monitoring are not taken into account, and (2) a combined method in which both results of bioassay measurements and workplace monitoring are considered

  14. Earthquake response analysis considering structure-soil-structure interaction

    International Nuclear Information System (INIS)

    Shiomi, T.; Takahashi, K.; Oguro, E.

    1981-01-01

    This paper proposes a numerical method of earthquake response analysis considering the structure-soil-structure interaction between two adjacent buildings. In this paper an analytical study is presented in order to show some typical features of coupling effects of two reactor buildings of the BWR-type nuclear power plant. The technical approach is a kind of substructure method, which at first evaluates the compliance properties with the foundation-soil-foundation interaction and then uses the compliance in determining seismic responses of two super-structures during earthquake motions. For this purpose, it is assumed that the soil medium is an elastic half space for modeling and that the rigidity of any type of structures such as piping facilities connecting the adjacent buildings is negligible. The technical approach is mainly based on the following procedures. Supersturcture stiffness is calculated by using the method which has been developed in our laboratory based on the Thin-Wall Beam Theory. Soil stiffness is expressed by a matrix with 12 x 12 elements as a function of frequency, which is calculated using the soil compliance functions proposed in Dr. Tajimi's Theory. These stiffness values may be expressed by complex numbers for modeling the damping mechanism of superstructures. We can solve eigenvalue problems with frequency dependent stiffness and the large-scale matrix using our method which is based on condensing the matrix to the suitable size by Rayleigh-Ritz method. Earthquake responses can be solved in the frequency domain by Fourier Transform. (orig./RW)

  15. Cost assessment of demo fusion reactor with considering maintenance

    International Nuclear Information System (INIS)

    Hashizume, Hidetoshi; Kitagoh, Kazutoshi

    2003-01-01

    The purpose of this study is to perform cost assessment of nuclear fusion reactors in order to draw up commercial plants. A fusion reactor may have a complex configuration to achieve high beta value, which leads to low and instable availability when maintenance is taken into account. Therefore, reactor's availability must be evaluated with considering the influence of the configuration complexity. Furthermore the availability has the strong impact on COE (Cost of Electricity), that is, a fusion reactor with low availability will not be accepted as a commercial plant. Therefore, we developed a new method to calculate availabilities with random numbers, in which the complexity of reactor's configuration could become considered. In addition, we considered the reduction of superconducting coil's maintenance time by introducing remountable magnet system because the coil maintenance requires quite long time in the present technology. The results show that the availability becomes relatively large if the short maintenance time of coils could be achieved, for example, by remountable magnetic systems. (author)

  16. Uncertainty Analysis with Considering Resonance Self-shielding Effect

    International Nuclear Information System (INIS)

    Han, Tae Young

    2016-01-01

    If infinitely diluted multi-group cross sections were used for the sensitivity, the covariance data from the evaluated nuclear data library (ENDL) was directly applied. However, in case of using a self-shielded multi-group cross section, the covariance data should be corrected considering self-shielding effect. Usually, implicit uncertainty can be defined as the uncertainty change by the resonance self-shielding effect as described above. MUSAD ( Modules of Uncertainty and Sensitivity Analysis for DeCART ) has been developed for a multiplication factor and cross section uncertainty based on the generalized perturbation theory and it, however, can only quantify the explicit uncertainty by the self-shielded multi-group cross sections without considering the implicit effect. Thus, this paper addresses the implementation of the implicit uncertainty analysis module into the code and the numerical results for the verification are provided. The implicit uncertainty analysis module has been implemented into MUSAD based on infinitely-diluted cross section-based consistent method. The verification calculation was performed on MHTGR 350 Ex.I-1a and the differences with McCARD result decrease from 40% to 1% in CZP case and 3% in HFP case. From this study, it is expected that MUSAD code can reasonably produce the complete uncertainty on VHTR or LWR where the resonance self-shielding effect should be significantly considered

  17. Uncertainty Analysis with Considering Resonance Self-shielding Effect

    Energy Technology Data Exchange (ETDEWEB)

    Han, Tae Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    If infinitely diluted multi-group cross sections were used for the sensitivity, the covariance data from the evaluated nuclear data library (ENDL) was directly applied. However, in case of using a self-shielded multi-group cross section, the covariance data should be corrected considering self-shielding effect. Usually, implicit uncertainty can be defined as the uncertainty change by the resonance self-shielding effect as described above. MUSAD ( Modules of Uncertainty and Sensitivity Analysis for DeCART ) has been developed for a multiplication factor and cross section uncertainty based on the generalized perturbation theory and it, however, can only quantify the explicit uncertainty by the self-shielded multi-group cross sections without considering the implicit effect. Thus, this paper addresses the implementation of the implicit uncertainty analysis module into the code and the numerical results for the verification are provided. The implicit uncertainty analysis module has been implemented into MUSAD based on infinitely-diluted cross section-based consistent method. The verification calculation was performed on MHTGR 350 Ex.I-1a and the differences with McCARD result decrease from 40% to 1% in CZP case and 3% in HFP case. From this study, it is expected that MUSAD code can reasonably produce the complete uncertainty on VHTR or LWR where the resonance self-shielding effect should be significantly considered.

  18. Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Dongkyu; Kim, Minsoo; Lee, Hyungyil [Sogang Univ., Seoul, (Korea, Republic of); Lee, Jin Haeng [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-11-15

    Creep through nanoindentations has attracted increasing research attention in recent years. Many studies related to indentation creep tests, however, have simply focused on the characteristics of steady-state creep, and there exist wide discrepancies between the uniaxial test and the indentation test. In this study, we performed a computational simulation of spherical indentations, and we proposed a method for evaluating the creep properties onsidering transient creep. We investigated the material behavior with variation of creep properties and expressed it using regression equations for normalized variables. We finally developed a program to evaluate the creep properties considering transient creep. By using the proposed method, we successfully obtained creep exponents with an average error less than 1.1 and creep coefficients with an average error less than 2.3 from the load-depth curve.

  19. Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep

    International Nuclear Information System (INIS)

    Lim, Dongkyu; Kim, Minsoo; Lee, Hyungyil; Lee, Jin Haeng

    2013-01-01

    Creep through nanoindentations has attracted increasing research attention in recent years. Many studies related to indentation creep tests, however, have simply focused on the characteristics of steady-state creep, and there exist wide discrepancies between the uniaxial test and the indentation test. In this study, we performed a computational simulation of spherical indentations, and we proposed a method for evaluating the creep properties onsidering transient creep. We investigated the material behavior with variation of creep properties and expressed it using regression equations for normalized variables. We finally developed a program to evaluate the creep properties considering transient creep. By using the proposed method, we successfully obtained creep exponents with an average error less than 1.1 and creep coefficients with an average error less than 2.3 from the load-depth curve

  20. Considering system non-linearity in transmission pricing

    International Nuclear Information System (INIS)

    Oloomi-Buygi, M.; Salehizadeh, M. Reza

    2008-01-01

    In this paper a new approach for transmission pricing is presented. The contribution of a contract on power flow of a transmission line is used as extent-of-use criterion for transmission pricing. In order to determine the contribution of each contract on power flow of each transmission line, first the contribution of each contract on each voltage angle is determined, which is called voltage angle decomposition. To this end, DC power flow is used to compute a primary solution for voltage angle decomposition. To consider the impacts of system non-linearity on voltage angle decomposition, a method is presented to determine the share of different terms of sine argument in sine value. Then the primary solution is corrected in different iterations of decoupled Newton-Raphson power flow using the presented sharing method. The presented approach is applied to a 4-bus test system and IEEE 30-bus test system and the results are analyzed. (author)

  1. Simulations of overall flow in gas centrifuge considering feed jet

    International Nuclear Information System (INIS)

    He Liang; Jiang Dongjun; Ying Chuntong

    2010-01-01

    A coupled method for the numerical solution of the flow in rapidly rotating gas centrifuge was presented. An iteration process of DSMC and CFD was performed to analyze the overall flow in radial direction, in which DSMC was adopted to simulate the rarefied region, and CFD was adopted to the counter-current of gas centrifuge to discrete the model equations. It was applied to simulate the 2D symmetrical flow model considering the rarefied region with the feed jet flow. A series of illustrative numerical examples were given. The flow structures of the feed jet in the rarefied gas flow region were shown. The results suggest that DSMC CFD coupled method is competent to the simulations of overall flow in a gas centrifuge. (authors)

  2. Considering Interactions among Multiple Criteria for the Server Selection

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2010-06-01

    Full Text Available Decision-making about server selection is one of the multi-criteria decision-making (MCDM processes where interactions among criteria should be considered. The paper introduces and develops some solutions for considering interactions among criteria in the MCDM problems. In the frame procedure for MCDM by using the group of methods, based on assigning weights, special attention is given to the synthesis of the local alternatives’ values into the aggregate values where the mutual preferential independence between two criteria is not assumed. Firstly, we delineate how to complete the additive model into the multiplicative one with synergic and redundancy elements in the case that criteria are structured in one level and in two levels. Furthermore, we adapted the concept of the fuzzy Choquet integral to the multi-attribute value theory. Studying and comparing the results of the example case of the server selection obtained by both aggregation approaches, the paper highlights the advantages of the first one since it does not require from decision makers to determine the weights of all possible combinations of the criteria and it enables the further use of the most preferred MCDM methods.

  3. Concrete Hydration Heat Analysis for RCB Basemat Considering Solar Radiation

    International Nuclear Information System (INIS)

    Lee, Seong-Cheol; Son, Yong-Ki; Choi, Seong-Cheol

    2015-01-01

    The NPP especially puts an emphasis on concrete durability for structural integrity. It has led to higher cementitious material contents, lower water-cementitious-material ratios, and deeper cover depth over reinforcing steel. These requirements have resulted in more concrete placements that are subject to high internal temperatures. The problem with high internal temperatures is the increase in the potential for thermal cracking that can decrease concrete's long-term durability and ultimate strength. Thermal cracking negates the benefits of less permeable concrete and deeper cover by providing a direct path for corrosion-causing agents to reach the reinforcing steel. The purpose of this study is to develop how to analyze and estimate accurately concrete hydration heat of the real-scale massive concrete with wide large plane. An analysis method considering concrete placement sequence was studied and solar radiation effects on the real-scale massive concrete with wide large plane were reviewed through the analytical method. In this study, the measured temperatures at the real scale structure and the analysis results of concrete hydration heat were compared. And thermal stress analysis was conducted. Through the analysis, it was found that concrete placement duration, sequence and solar radiation effects should be considered to get the accurate concrete peak temperature, maximum temperature differences and crack index

  4. Two-stage image denoising considering interscale and intrascale dependencies

    Science.gov (United States)

    Shahdoosti, Hamid Reza

    2017-11-01

    A solution to the problem of reducing the noise of grayscale images is presented. To consider the intrascale and interscale dependencies, this study makes use of a model. It is shown that the dependency between a wavelet coefficient and its predecessors can be modeled by the first-order Markov chain, which means that the parent conveys all of the information necessary for efficient estimation. Using this fact, the proposed method employs the Kalman filter in the wavelet domain for image denoising. The proposed method has two stages. The first stage employs a simple denoising algorithm to provide the noise-free image, by which the parameters of the model such as state transition matrix, variance of the process noise, the observation model, and the covariance of the observation noise are estimated. In the second stage, the Kalman filter is applied to the wavelet coefficients of the noisy image to estimate the noise-free coefficients. In fact, the Kalman filter is used to estimate the coefficients of high-frequency subbands from the coefficients of coarser scales and noisy observations of neighboring coefficients. In this way, both the interscale and intrascale dependencies are taken into account. Results are presented and discussed on a set of standard 8-bit grayscale images. The experimental results demonstrate that the proposed method achieves performances competitive with the state-of-the-art denoising methods in terms of both peak-signal-to-noise ratio and subjective visual quality.

  5. Observability-Enhanced PMU Placement Considering Conventional Measurements and Contingencies

    Directory of Open Access Journals (Sweden)

    M. Esmaili

    2014-12-01

    Full Text Available Phasor Measurement Units (PMUs are in growing attention in recent power systems because of their paramount abilities in state estimation. PMUs are placed in existing power systems where there are already installed conventional measurements, which can be helpful if they are considered in PMU optimal placement. In this paper, a method is proposed for optimal placement of PMUs incorporating conventional measurements of zero injection buses and branch flow measurements using a permutation matrix. Furthermore, the effect of single branch outage and single PMU failure is included in the proposed method. When a branch with a flow measurement goes out, the network loses one observability path (the branch and one conventional measurement (the flow measurement. The permutation matrix proposed here is able to model the outage of a branch equipped with a flow measurement or connected to a zero injection bus. Also, measurement redundancy, and consequently measurement reliability, is enhanced without increasing the number of PMUs this implies a more efficient usage of PMUs than previous methods. The PMU placement problem is formulated as a mixed-integer linear programming that results in the global optimal solution. Results obtained from testing the proposed method on four well-known test systems in diverse situations confirm its efficiency.

  6. Preconditioned Krylov subspace methods for eigenvalue problems

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Saad, Y.; Stathopoulos, A. [Univ. of Minnesota, Minneapolis, MN (United States)

    1996-12-31

    Lanczos algorithm is a commonly used method for finding a few extreme eigenvalues of symmetric matrices. It is effective if the wanted eigenvalues have large relative separations. If separations are small, several alternatives are often used, including the shift-invert Lanczos method, the preconditioned Lanczos method, and Davidson method. The shift-invert Lanczos method requires direct factorization of the matrix, which is often impractical if the matrix is large. In these cases preconditioned schemes are preferred. Many applications require solution of hundreds or thousands of eigenvalues of large sparse matrices, which pose serious challenges for both iterative eigenvalue solver and preconditioner. In this paper we will explore several preconditioned eigenvalue solvers and identify the ones suited for finding large number of eigenvalues. Methods discussed in this paper make up the core of a preconditioned eigenvalue toolkit under construction.

  7. Implementing shared decision-making: consider all the consequences.

    Science.gov (United States)

    Elwyn, Glyn; Frosch, Dominick L; Kobrin, Sarah

    2016-08-08

    The ethical argument that shared decision-making is "the right" thing to do, however laudable, is unlikely to change how healthcare is organized, just as evidence alone will be an insufficient factor: practice change is governed by factors such as cost, profit margin, quality, and efficiency. It is helpful, therefore, when evaluating new approaches such as shared decision-making to conceptualize potential consequences in a way that is broad, long-term, and as relevant as possible to multiple stakeholders. Yet, so far, evaluation metrics for shared decision-making have been mostly focused on short-term outcomes, such as cognitive or affective consequences in patients. The goal of this article is to hypothesize a wider set of consequences, that apply over an extended time horizon, and include outcomes at interactional, team, organizational and system levels, and to call for future research to study these possible consequences. To date, many more studies have evaluated patient decision aids rather than other approaches to shared decision-making, and the outcomes measured have typically been focused on short-term cognitive and affective outcomes, for example knowledge and decisional conflict. From a clinicians perspective, the shared decision-making process could be viewed as either intrinsically rewarding and protective, or burdensome and impractical, yet studies have not focused on the impact on professionals, either positive or negative. At interactional levels, group, team, and microsystem, the potential long-term consequences could include the development of a culture where deliberation and collaboration are regarded as guiding principles, where patients are coached to assess the value of interventions, to trade-off benefits versus harms, and assess their burdens-in short, to new social norms in the clinical workplace. At organizational levels, consistent shared decision-making might boost patient experience evaluations and lead to fewer complaints and legal

  8. A generalized Fellner-Schall method for smoothing parameter optimization with application to Tweedie location, scale and shape models.

    Science.gov (United States)

    Wood, Simon N; Fasiolo, Matteo

    2017-12-01

    We consider the optimization of smoothing parameters and variance components in models with a regular log likelihood subject to quadratic penalization of the model coefficients, via a generalization of the method of Fellner (1986) and Schall (1991). In particular: (i) we generalize the original method to the case of penalties that are linear in several smoothing parameters, thereby covering the important cases of tensor product and adaptive smoothers; (ii) we show why the method's steps increase the restricted marginal likelihood of the model, that it tends to converge faster than the EM algorithm, or obvious accelerations of this, and investigate its relation to Newton optimization; (iii) we generalize the method to any Fisher regular likelihood. The method represents a considerable simplification over existing methods of estimating smoothing parameters in the context of regular likelihoods, without sacrificing generality: for example, it is only necessary to compute with the same first and second derivatives of the log-likelihood required for coefficient estimation, and not with the third or fourth order derivatives required by alternative approaches. Examples are provided which would have been impossible or impractical with pre-existing Fellner-Schall methods, along with an example of a Tweedie location, scale and shape model which would be a challenge for alternative methods, and a sparse additive modeling example where the method facilitates computational efficiency gains of several orders of magnitude. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. © 2017, The Authors Biometrics published by Wiley Periodicals, Inc. on behalf of International Biometric Society.

  9. Transient radiative transfer in a scattering slab considering polarization.

    Science.gov (United States)

    Yi, Hongliang; Ben, Xun; Tan, Heping

    2013-11-04

    The characteristics of the transient and polarization must be considered for a complete and correct description of short-pulse laser transfer in a scattering medium. A Monte Carlo (MC) method combined with a time shift and superposition principle is developed to simulate transient vector (polarized) radiative transfer in a scattering medium. The transient vector radiative transfer matrix (TVRTM) is defined to describe the transient polarization behavior of short-pulse laser propagating in the scattering medium. According to the definition of reflectivity, a new criterion of reflection at Fresnel surface is presented. In order to improve the computational efficiency and accuracy, a time shift and superposition principle is applied to the MC model for transient vector radiative transfer. The results for transient scalar radiative transfer and steady-state vector radiative transfer are compared with those in published literatures, respectively, and an excellent agreement between them is observed, which validates the correctness of the present model. Finally, transient radiative transfer is simulated considering the polarization effect of short-pulse laser in a scattering medium, and the distributions of Stokes vector in angular and temporal space are presented.

  10. Discrete event simulation of Maglev transport considering traffic waves

    Directory of Open Access Journals (Sweden)

    Moo Hyun Cha

    2014-10-01

    Full Text Available A magnetically levitated vehicle (Maglev system is under commercialization as a new transportation system in Korea. The Maglev is operated by an unmanned automatic control system. Therefore, the plan of train operation should be carefully established and validated in advance. In general, when making a train operation plan, statistically predicted traffic data is used. However, a traffic wave often occurs in real train service, and demand-driven simulation technology is required to review a train operation plan and service quality considering traffic waves. We propose a method and model to simulate Maglev operation considering continuous demand changes. For this purpose, we employed a discrete event model that is suitable for modeling the behavior of railway passenger transportation. We modeled the system hierarchically using discrete event system specification (DEVS formalism. In addition, through implementation and an experiment using the DEVSim++ simulation environment, we tested the feasibility of the proposed model. Our experimental results also verified that our demand-driven simulation technology can be used for a priori review of train operation plans and strategies.

  11. Considering Variable Road Geometry in Adaptive Vehicle Speed Control

    Directory of Open Access Journals (Sweden)

    Xinping Yan

    2013-01-01

    Full Text Available Adaptive vehicle speed control is critical for developing Advanced Driver Assistance Systems (ADAS. Vehicle speed control considering variable road geometry has become a hotspot in ADAS research. In this paper, first, an exploration of intrinsic relationship between vehicle operation and road geometry is made. Secondly, a collaborative vehicle coupling model, a road geometry model, and an AVSC, which can respond to variable road geometry in advance, are developed. Then, based on H∞ control method and the minimum energy principle, a performance index is specified by a cost function for the proposed AVSC, which can explicitly consider variable road geometry in its optimization process. The proposed AVSC is designed by the Hamilton-Jacobi Inequality (HJI. Finally, simulations are carried out by combining the vehicle model with the road geometry model, in an aim of minimizing the performance index of the AVSC. Analyses of the simulation results indicate that the proposed AVSC can automatically and effectively regulate speed according to variable road geometry. It is believed that the proposed AVSC can be used to improve the economy, comfort, and safety effects of current ADAS.

  12. Considering value of information when using CFD in design

    Energy Technology Data Exchange (ETDEWEB)

    Misra, John Satprim [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    This thesis presents an approach to find lower resolution CFD models that can accurately lead a designer to a correct decision at a lower computational cost. High-fidelity CFD models often contain too much information and come at a higher computational cost, limiting the designs a designer can test and how much optimization can be performed on the design. Lower model resolution is commonly used to reduce computational time. However there are no clear guidelines on how much model accuracy is required. Instead experience and intuition are used to select an appropriate lower resolution model. This thesis presents an alternative to this ad hoc method by considering the added value of the addition information provided by increasing accurate and more computationally expensive models.

  13. Microbiological Aspects Considering the Production of Nutraceutical Curd Containing Onion

    Directory of Open Access Journals (Sweden)

    Anca Dumuţa

    2016-10-01

    Full Text Available The curd is a traditional Romanian dairy product highly appreciated by the consumers. The purpose of this study was to produce and analyze from the microbiological point of view a nutraceutical curd containing onion, as a prebiotic source. The synbiotics generate among the organoleptic benefits also health improvement due to the different actions taken by probiotics and prebiotics, working together. The curd was produced by the traditional method using buffalo milk with reduced cholesterol content due to the treatment with crosslinked β-ciclodextrin with adipic acid.The curd prepared by rennet adding and coagulation at 30°C during 30-45 minutes was subjected to the maturation at a temperature of 12-16°C. Considering the microbiological tests, the curd recorded a pozitive evolution, being characterized by a lower microbial load compared with a control curd, prepared without onion.

  14. Redo of Coil Spring Considering Transversal Direction Mode Tracking

    International Nuclear Information System (INIS)

    Lee, Jin Min; Jang, Junyong; Lee, Tae Hee

    2013-01-01

    When the values of design variables change, mode switching can often occur. If the mode of interest is not tracked, the frequencies and modes for design optimization may be miscalculated owing to modes that differ from the intended ones. Thus, mode tracking must be employed to identify the frequencies and modes of interest whenever the values of design variables change during optimization. Furthermore, reliability-based design optimization (Redo) must be performed for design problems with design variables containing uncertainty. In this research, we perform Redo considering the mode tracking of a compressive coil spring, i.e., a component of the joint spring that supports a compressor, with design variables containing uncertainty by using only kriging meta models based on multiple responses approach (MR A) without existing mode tracking methods. The reliability analyses for Redo are employed using kriging meta model-based Monte Carlo simulation

  15. Decision aid for women considering breast cancer screening

    DEFF Research Database (Denmark)

    Pasternack, Iris; Saalasti-Koskinen, Ulla; Mäkelä, Marjukka

    2011-01-01

    OBJECTIVES: The aim of this study was to describe the process and challenges of developing a decision aid for the national public breast cancer screening program in Finland. METHODS: An expert team with stakeholder representation used European guidelines and other literature as basis for selecting...... relevant content and format for the decision aid for breast cancer screening. Feedback from women was sought for the draft documents. RESULTS: A decision aid attached to the invitation letter for screening was considered the best way to ensure access to information. In addition, tailored letter templates...... information for women invited to breast cancer screening is demanding and requires careful planning. Professionals and service providers need to be engaged in the HTA process to ensure proper dissemination and implementation of the information. End user participation is essential in the formulation...

  16. Terminal altitude maximization for Mars entry considering uncertainties

    Science.gov (United States)

    Cui, Pingyuan; Zhao, Zeduan; Yu, Zhengshi; Dai, Juan

    2018-04-01

    Uncertainties present in the Mars atmospheric entry process may cause state deviations from the nominal designed values, which will lead to unexpected performance degradation if the trajectory is designed merely based on the deterministic dynamic model. In this paper, a linear covariance based entry trajectory optimization method is proposed considering the uncertainties presenting in the initial states and parameters. By extending the elements of the state covariance matrix as augmented states, the statistical behavior of the trajectory is captured to reformulate the performance metrics and path constraints. The optimization problem is solved by the GPOPS-II toolbox in MATLAB environment. Monte Carlo simulations are also conducted to demonstrate the capability of the proposed method. Primary trading performances between the nominal deployment altitude and its dispersion can be observed by modulating the weights on the dispersion penalty, and a compromised result referring to maximizing the 3σ lower bound of the terminal altitude is achieved. The resulting path constraints also show better satisfaction in a disturbed environment compared with the nominal situation.

  17. A weighted U statistic for association analyses considering genetic heterogeneity.

    Science.gov (United States)

    Wei, Changshuai; Elston, Robert C; Lu, Qing

    2016-07-20

    Converging evidence suggests that common complex diseases with the same or similar clinical manifestations could have different underlying genetic etiologies. While current research interests have shifted toward uncovering rare variants and structural variations predisposing to human diseases, the impact of heterogeneity in genetic studies of complex diseases has been largely overlooked. Most of the existing statistical methods assume the disease under investigation has a homogeneous genetic effect and could, therefore, have low power if the disease undergoes heterogeneous pathophysiological and etiological processes. In this paper, we propose a heterogeneity-weighted U (HWU) method for association analyses considering genetic heterogeneity. HWU can be applied to various types of phenotypes (e.g., binary and continuous) and is computationally efficient for high-dimensional genetic data. Through simulations, we showed the advantage of HWU when the underlying genetic etiology of a disease was heterogeneous, as well as the robustness of HWU against different model assumptions (e.g., phenotype distributions). Using HWU, we conducted a genome-wide analysis of nicotine dependence from the Study of Addiction: Genetics and Environments dataset. The genome-wide analysis of nearly one million genetic markers took 7h, identifying heterogeneous effects of two new genes (i.e., CYP3A5 and IKBKB) on nicotine dependence. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  18. Calculation of the thermal solar contribution in facilities of ACS in buildings. Comparison between the method of strong simulation and F-Chart considering lost in the circuits; Calculo de la contribucion solar termica en instalaciones de ACS en edificios. Comparacion entre el metodo de simulacion dinamica y F-Chart considerando perdidas en los circuitos

    Energy Technology Data Exchange (ETDEWEB)

    Guillo, J. F.; Lucas, M.; Lucas, R.; Vicente, P. G.

    2008-07-01

    It has analyzed the impact of distribution losses in the size of solar installations by comparing two methods commonly used in calculating the contribution of solar residential building: f-chart and dynamic simulation. 3 schemes have been analysed in a building 22 houses and 70 occupants located in the IV and climate in the province of Alicante. For comparison between the two methodologies have been used for calculating the same values input from climate data as consumption of ACS. (Author)

  19. 20 CFR 416.1856 - Who is considered a child.

    Science.gov (United States)

    2010-04-01

    ..., BLIND, AND DISABLED Relationship Who Is Considered A Child § 416.1856 Who is considered a child. We... are a student regularly attending school or college or training that is designed to prepare you for a...

  20. Factors to consider in the transition to digital radiological imaging.

    LENUS (Irish Health Repository)

    MacDonald, David

    2009-02-01

    The dentist considering adopting digital radiological technology should consider more than the type of detector with which to capture the image. He\\/she should also consider the mode of display, image enhancement, radiation dose reduction, how the image can be stored long term, and infection control.

  1. Proposed method for the hydraulic design of ski-jump energy dissipators in dam spillways considering the occurrence of scour holes downstream of the structure; Metodo propuesto para el diseno hidraulico de trampolines empleados como disipadores de energia en aliviaderos para presas, considerando la ocurrencia del cono de socavacion al pie del mismo

    Energy Technology Data Exchange (ETDEWEB)

    Pardo-Gomez, Rafael [Centro de Investigaciones Hidraulicas (Cuba)

    2008-04-15

    Ski-jump energy dissipators are widely used in hydraulic engineering because of their well-known effectiveness. Nevertheless, some uncertainty exits associated with the dimensions of the scour hole appearing downstream of the structure. This paper presents a new method for solving this problem. This method includes spillway stability checking as part of the design process and also stability checking of any other construction near the energy dissipation zone. [Spanish] Los disipadores de energia tipo trampolin tienen amplia utilizacion en la practica de la ingenieria hidraulica por su probada eficacia; sin embargo, su diseno esta sujeto a cierto grado de incertidumbre en cuanto a la prediccion de las dimensiones del cono de socavacion que habra de producirse aguas abajo de la estructura. En el presente trabajo se muestra un metodo novedoso, mediante el cual el autor soluciona el aspecto antes referido, toda vez que se incluye como parte del proceso de diseno la comprobacion de la estabilidad del propio aliviadero o de cualquier otra obra cercana a la zona de disipacion de energia.

  2. Power management of remote microgrids considering battery lifetime

    Science.gov (United States)

    Chalise, Santosh

    Currently, 20% (1.3 billion) of the world's population still lacks access to electricity and many live in remote areas where connection to the grid is not economical or practical. Remote microgrids could be the solution to the problem because they are designed to provide power for small communities within clearly defined electrical boundaries. Reducing the cost of electricity for remote microgrids can help to increase access to electricity for populations in remote areas and developing countries. The integration of renewable energy and batteries in diesel based microgrids has shown to be effective in reducing fuel consumption. However, the operational cost remains high due to the low lifetime of batteries, which are heavily used to improve the system's efficiency. In microgrid operation, a battery can act as a source to augment the generator or a load to ensure full load operation. In addition, a battery increases the utilization of PV by storing extra energy. However, the battery has a limited energy throughput. Therefore, it is required to provide balance between fuel consumption and battery lifetime throughput in order to lower the cost of operation. This work presents a two-layer power management system for remote microgrids. First layer is day ahead scheduling, where power set points of dispatchable resources were calculated. Second layer is real time dispatch, where schedule set points from the first layer are accepted and resources are dispatched accordingly. A novel scheduling algorithm is proposed for a dispatch layer, which considers the battery lifetime in optimization and is expected to reduce the operational cost of the microgrid. This method is based on a goal programming approach which has the fuel and the battery wear cost as two objectives to achieve. The effectiveness of this method was evaluated through a simulation study of a PV-diesel hybrid microgrid using deterministic and stochastic approach of optimization.

  3. Reactive power dispatch considering voltage stability with seeker optimization algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Chaohua; Chen, Weirong; Zhang, Xuexia [The School of Electrical Engineering, Southwest Jiaotong University, Chengdu 610031 (China); Zhu, Yunfang [Department of Computer and Communication Engineering, E' mei Campus, Southwest Jiaotong University, E' mei 614202 (China)

    2009-10-15

    Optimal reactive power dispatch (ORPD) has a growing impact on secure and economical operation of power systems. This issue is well known as a non-linear, multi-modal and multi-objective optimization problem where global optimization techniques are required in order to avoid local minima. In the last decades, computation intelligence-based techniques such as genetic algorithms (GAs), differential evolution (DE) algorithms and particle swarm optimization (PSO) algorithms, etc., have often been used for this aim. In this work, a seeker optimization algorithm (SOA) based method is proposed for ORPD considering static voltage stability and voltage deviation. The SOA is based on the concept of simulating the act of human searching where search direction is based on the empirical gradient by evaluating the response to the position changes and step length is based on uncertainty reasoning by using a simple Fuzzy rule. The algorithm's performance is studied with comparisons of two versions of GAs, three versions of DE algorithms and four versions of PSO algorithms on the IEEE 57 and 118-bus power systems. The simulation results show that the proposed approach performed better than the other listed algorithms and can be efficiently used for the ORPD problem. (author)

  4. A deterministic aggregate production planning model considering quality of products

    International Nuclear Information System (INIS)

    Madadi, Najmeh; Wong, Kuan Yew

    2013-01-01

    Aggregate Production Planning (APP) is a medium-term planning which is concerned with the lowest-cost method of production planning to meet customers' requirements and to satisfy fluctuating demand over a planning time horizon. APP problem has been studied widely since it was introduced and formulated in 1950s. However, in several conducted studies in the APP area, most of the researchers have concentrated on some common objectives such as minimization of cost, fluctuation in the number of workers, and inventory level. Specifically, maintaining quality at the desirable level as an objective while minimizing cost has not been considered in previous studies. In this study, an attempt has been made to develop a multi-objective mixed integer linear programming model that serves those companies aiming to incur the minimum level of operational cost while maintaining quality at an acceptable level. In order to obtain the solution to the multi-objective model, the Fuzzy Goal Programming approach and max-min operator of Bellman-Zadeh were applied to the model. At the final step, IBM ILOG CPLEX Optimization Studio software was used to obtain the experimental results based on the data collected from an automotive parts manufacturing company. The results show that incorporating quality in the model imposes some costs, however a trade-off should be done between the cost resulting from producing products with higher quality and the cost that the firm may incur due to customer dissatisfaction and sale losses.

  5. Considering genetic characteristics in German Holstein breeding programs.

    Science.gov (United States)

    Segelke, D; Täubert, H; Reinhardt, F; Thaller, G

    2016-01-01

    Recently, several research groups have demonstrated that several haplotypes may cause embryonic loss in the homozygous state. Up to now, carriers of genetic disorders were often excluded from mating, resulting in a decrease of genetic gain and a reduced number of sires available for the breeding program. Ongoing research is very likely to identify additional genetic defects causing embryonic loss and calf mortality by genotyping a large proportion of the female cattle population and sequencing key ancestors. Hence, a clear demand is present to develop a method combining selection against recessive defects (e.g., Holstein haplotypes HH1-HH5) with selection for economically beneficial traits (e.g., polled) for mating decisions. Our proposed method is a genetic index that accounts for the allele frequencies in the population and the economic value of the genetic characteristic without excluding carriers from breeding schemes. Fertility phenotypes from routine genetic evaluations were used to determine the economic value per embryo lost. Previous research has shown that embryo loss caused by HH1 and HH2 occurs later than the loss for HH3, HH4, and HH5. Therefore, an economic value of € 97 was used against HH1 and HH2 and € 70 against HH3, HH4, and HH5. For polled, € 7 per polled calf was considered. Minor allele frequencies of the defects ranged between 0.8 and 3.3%. The polled allele has a frequency of 4.1% in the German Holstein population. A genomic breeding program was simulated to study the effect of changing the selection criteria from assortative mating based on breeding values to selecting the females using the genetic index. Selection for a genetic index on the female path is a useful method to control the allele frequencies by reducing undesirable alleles and simultaneously increasing economical beneficial characteristics maintaining most of the genetic gain in production and functional traits. Additionally, we applied the genetic index to real data and

  6. Modelagem do desenvolvimento de trigo considerando diferentes temperaturas cardinais e métodos de cálculo da função de resposta à temperatura Modeling wheat development considering different cardinal temperatures and methods for the temperature response function calculation

    Directory of Open Access Journals (Sweden)

    Cleber Maus Alberto

    2009-06-01

    Full Text Available O objetivo deste trabalho foi melhorar a estimativa dos estádios de desenvolvimento de genótipos brasileiros de trigo (Triticum aestivum realizada por meio do modelo WE-Streck. Foram avaliadas diferentes combinações de temperaturas cardinais e métodos de cálculo da função de resposta à temperatura. Dados referentes às datas da emergência, da emissão da espigueta terminal, da antese e da maturidade fisiológica de seis genótipos brasileiros de trigo semeados em 11 datas ao longo de três anos (2005, 2006 e 2007 em Santa Maria, RS, foram usados para estimar os coeficientes do modelo WE-Streck modificado e testar as diferentes combinações de temperaturas cardinais e métodos de cálculo da função de resposta à temperatura. Para os genótipos BRS Louro, BRS 177, CEP 51, CEP 52 e Nova Era, a simulação do desenvolvimento com o modelo de WE-Streck é melhor quando são usados maiores valores de temperaturas cardinais ótima e máxima, em comparação às usadas originalmente no modelo. Para o genótipo BRS Tarumã, devem ser utilizadas as temperaturas cardinais do modelo WE-Streck original. É recomendável usar as temperaturas mínimas e máximas diárias para calcular a função de resposta à temperatura quando o modelo WE-Streck for usado para simulação do desenvolvimento de genótipos brasileiros de trigo.The objective of this work was to improve the prediction of developmental stages of Brazilian wheat (Triticum aestivum genotypes made using the WE-Streck model. Different combinations of cardinal temperatures and methods of calculating the temperature response function were evaluated. Data regarding the dates of emergence, terminal spikelet, anthesis, and physiological maturity of six Brazilian wheat genotypes sown on 11 dates during three years (2005, 2006, and 2007 at Santa Maria, RS, Brazil, were used to estimate the WE-Streck model coefficients and to evaluate the different combinations of cardinal temperatures and

  7. Dynamic shortest path problems : hybrid routing policies considering network disruptions

    NARCIS (Netherlands)

    Sever, D.; Dellaert, N.P.; Woensel, van T.; Kok, de A.G.

    2013-01-01

    Traffic network disruptions lead to significant increases in transportation costs. We consider networks in which a number of links are vulnerable to these disruptions leading to a significantly higher travel time on these links. For these vulnerable links, we consider known link disruption

  8. 5 CFR 2608.202 - Factors OGE will consider.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Factors OGE will consider. 2608.202 Section 2608.202 Administrative Personnel OFFICE OF GOVERNMENT ETHICS ORGANIZATION AND PROCEDURES... PROCEEDINGS Requests for Testimony and Production of Documents § 2608.202 Factors OGE will consider. The...

  9. What teacher educators consider as best practices in preparing pre ...

    African Journals Online (AJOL)

    This paper reports on an investigation into what teacher educators consider to be best practices in how to prepare pre-service teachers to effectively deal with the challenges of teaching Mathematics in multilingual contexts, and how what teacher educators consider as best practices inform their own classroom practice.

  10. 26 CFR 48.4217-1 - Lease considered as sale.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Lease considered as sale. 48.4217-1 Section 48... article by a manufacturer, producer, or importer shall be considered a sale of the article. The term “lease” means a contract or agreement, written or verbal, which gives the lessee an exclusive, continuous...

  11. Criticality safety of spent fuel casks considering water inleakage

    International Nuclear Information System (INIS)

    Osgood, N.L.; Withee, C.J.; Easton, E.P.

    2004-01-01

    A fundamental safety design parameter for all fissile material packages is that a single package must be critically safe even if water leaks into the containment system. In addition, criticality safety must be assured for arrays of packages under normal conditions of transport (undamaged packages) and under hypothetical accident conditions (damaged packages). The U.S. Nuclear Regulatory Commission staff has revised the review protocol for demonstrating criticality safety for spent fuel casks. Previous review guidance specified that water inleakage be considered under accident conditions. This practice was based on the fact that the leak tightness of spent fuel casks is typically demonstrated by use of structural analysis and not by physical testing. In addition, since a single package was shown to be safe with water inleakage, it was concluded that this analysis was also applicable to an array of damaged packages, since the heavy shield walls in spent fuel casks neutronically isolate each cask in the array. Inherent in this conclusion is that the fuel assembly geometry does not change significantly, even under drop test conditions. Requests for shipping fuel with burnup exceeding 40 GWd/MTU, including very high burnups exceeding 60 GWD/MTU, caused a reassessment of this assumption. Fuel cladding structural strength and ductility were not clearly predictable for these higher burnups. Therefore the single package analysis for an undamaged package may not be applicable for the damaged package. NRC staff developed a new practice for review of spent fuel casks under accident conditions. The practice presents two methods for approval that would allow an assessment of potential reconfiguration of the fuel assembly under accident conditions, or, alternatively, a demonstration of the water-exclusion boundary through physical testing

  12. Behaviour therapy for obesity treatment considering approved drug therapy

    Directory of Open Access Journals (Sweden)

    Wasem, Jürgen

    2008-05-01

    Full Text Available Introduction: Obesity is a worldwide health problem whose prevalence is on the increase. Many obesity-associated diseases require intensive medical treatment and are the cause of a large proportion of health-related expenditures in Germany. Treatment of obesity includes nutritional, exercise and behaviour therapy, usually in combination. The goal of behaviour therapy for obesity is to bring about a long-term alteration in the eating and exercise habits of overweight and obese individuals. Under certain circumstances, drug treatment may be indicated. Objectives: What is the effectiveness of behaviour therapy for obesity considering approved drugs reduce weight under medical, economic, ethical-social and legal aspects? Methods: A systematic review was conducted using relevant electronic literature databases. Publications chosen according to predefined criteria are evaluated by approved methodical standards of the evidence-based medicine systematically and qualitatively. Results: In total 18 studies, included one HTA and one meta-analysis could be identified according to the predefined inclusion criteria. Three studies compare behaviour therapy to other therapy forms (advice or instruction on nutritional changes, physical activity or a combination of the two, six studies evaluate different forms of behaviour therapy, four studies and four studies compare behaviour therapies mediated by Internet or telephone. Three studies could be identified examining the effect of the combination of behaviour and drug therapy. Furthermore one HTA and one meta-analysis could be included in the evaluation. The behaviour therapy in comparison with other therapy forms reveals a higher effectiveness. In comparison of the different therapeutic approaches of the behaviour therapy intensive behaviour therapy forms and group therapy show a higher effectiveness. Studies related to behaviour therapy based on media support demonstrate a weight reduction both through the

  13. Seismic response of the 'Cut-and Cover' type reactor containment considering nonlinear soil behavior

    International Nuclear Information System (INIS)

    El-Tahan, H.; Reddy, D.V.

    1979-01-01

    This paper describes some parametric studies of dynamic soil-structure interaction for the 'cut-and-cover' reactor concept. The dynamic loading considered is a horizontal earthquake motion. The high frequency ranges, which must be considered in the study of soil-structure interaction for nuclear power plants, and the nonlinearity of soil behavior during strong earthquakes are adequately taken into account. Soil nonlinearity is accounted for in an approximate manner using a combination of the 'equivalent linear method' and the method of complex response with complex moduli. The structure considered is a reinforced concrete containment for a 1100 - MWe power plant, buried in a dense sand medium. (orig.)

  14. Optimization of Surface Finish in Turning Operation by Considering the Machine Tool Vibration using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Muhammad Munawar

    2012-01-01

    Full Text Available Optimization of surface roughness has been one of the primary objectives in most of the machining operations. Poor control on the desired surface roughness generates non conforming parts and results into increase in cost and loss of productivity due to rework or scrap. Surface roughness value is a result of several process variables among which machine tool condition is one of the significant variables. In this study, experimentation was carried out to investigate the effect of machine tool condition on surface roughness. Variable used to represent machine tool\\'s condition was vibration amplitude. Input parameters used, besides vibration amplitude, were feed rate and insert nose radius. Cutting speed and depth of cut were kept constant. Based on Taguchi orthogonal array, a series of experimentation was designed and performed on AISI 1040 carbon steel bar at default and induced machine tool\\'s vibration amplitudes. ANOVA (Analysis of Variance, revealed that vibration amplitude and feed rate had moderate effect on the surface roughness and insert nose radius had the highest significant effect on the surface roughness. It was also found that a machine tool with low vibration amplitude produced better surface roughness. Insert with larger nose radius produced better surface roughness at low feed rate.

  15. Maximizing carbon storage in the Appalachians: A method for considering the risk of disturbance events

    Science.gov (United States)

    Michael R. Vanderberg; Kevin Boston; John. Bailey

    2011-01-01

    Accounting for the probability of loss due to disturbance events can influence the prediction of carbon flux over a planning horizon, and can affect the determination of optimal silvicultural regimes to maximize terrestrial carbon storage. A preliminary model that includes forest disturbance-related carbon loss was developed to maximize expected values of carbon stocks...

  16. New method for determining free core nutation parameters, considering geophysical effects

    Czech Academy of Sciences Publication Activity Database

    Vondrák, Jan; Ron, Cyril

    2017-01-01

    Roč. 604, August (2017), A56/1-A56/7 E-ISSN 1432-0746 R&D Projects: GA ČR GA13-15943S Institutional support: RVO:67985815 Keywords : astrometry * reference systems * Earth Subject RIV: BN - Astronomy , Celestial Mechanics, Astrophysics OBOR OECD: Astronomy (including astrophysics,space science) Impact factor: 5.014, year: 2016

  17. Method to assess the performance of domestic ventilation systems considering the influence of uncertainties

    NARCIS (Netherlands)

    Yang, Z.

    2012-01-01

    The ventilation system plays an important role in the indoor environment of a domestic building. A ventilation system is normally designed based on the national or regional regulations. Although ventilation systems are designed based on the same design rules, performance deviations between different

  18. Methods of designing terminal facilities at the airport "Boryspil" considering external shock dynamic effects

    Directory of Open Access Journals (Sweden)

    В.Ю. Гирич

    2007-01-01

    Full Text Available  General procedure of assassination risk estimation is developed. Fast-acting collision of aircraft with building is modeled. The basic mechanisms of building destruction at impact-dynamic influences are described (falling, impact of aircraft. Recommendations, which can be used for building stability estimation at the aircraft impact, are developed. Recommendations for air terminal stability provision against progressing destruction are presented.

  19. A method to estimate characteristics of grounding systems considering experimental studies and computational simulations

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Andre Nunes de; Silva, Ivan Nunes da; Ulson, Jose Alfredo C.; Zago, Maria Goretti [UNESP, Bauru, SP (Brazil). Dept. de Engenharia Eletrica]. E-mail: andrejau@bauru.unesp.br

    2001-07-01

    This paper describes a novel approach for mapping characteristics of grounding systems using artificial neural networks. The network acts as identifier of structural features of the grounding processes. So that output parameters can be estimated and generalized from an input parameter set. The results obtained by the network are compared with other approaches also used to model grounding systems concerning lightning. (author)

  20. Fault Detection in High Speed Helical Gears Considering Signal Processing Method in Real Simulation

    Directory of Open Access Journals (Sweden)

    Amir Ali Tabatabai Adnani

    Full Text Available Abstract In the present study, in order to detect the fault of the gearmeshs, two engaged gears based on research department of a major automotive company have been modeled. First off, by using the CATIA software the fault was induced to the output gear. Then, the faulty gearmesh and non-faulty gearmesh is modeled to find the fault pattern to predict and estimate the failure of the gearmesh. The induced defect is according to the frequently practical fault that takes place to the teeth of gears. In order to record the acceleration signals to calculate the decomposition algorithm, mount the accelerometer on accessible place of the output shaft to recognize the pattern. Then, for more realistic simulation, noise is added to the output signal. At the first step by means of Butterworth low pass digital, the noise has to be removed from signals after that by using the Empirical Mode Decomposition (EMD, signals have decomposed into the Instinct Mode Function (IMF and every IMF were tested by using the Instantaneous Frequency (IF in way of Hillbert Transform (HT. For this purpose a code was developed in MATLAB software. Then, in order to detect the presence of the fault the frequency spectrum of IMF's are created and defect is detected in gearmesh frequency of the spectrum.

  1. Considerable improvement of entanglement swapping by considering multiphoton transitions via cavity quantum electrodynamics method

    Science.gov (United States)

    Pakniat, R.; Soltani, M.; Tavassoly, M. K.

    2018-03-01

    Recently we studied the effect of photon addition in the initial coherent field on the entanglement swapping which causes some improvements in the process [Soltani et al., Int. J. Mod. Phys. B 31, 1750198 (2017)]. In this paper, we investigate the influence of multiphoton transitions in the atom-field interaction based on the cavity quantum electrodynamics on the entanglement swapping and show its considerable constructive effect on this process. The presented model consists of two two-level atoms namely A1 and A2 and two distinct cavity fields F1 and F2. Initially, the atoms are prepared in a maximally entangled state and the fields in the cavities are prepared in hybrid entangled state of number and coherent states, separately. Making the atom A2 to interact with the field F1 (via the generalized Jaynes-Cummings model which allows m-photon transitions between atomic levels in the emission and absorption processes) followed by their detection allows us to arrive at the entanglement swapping from the two atoms A1, A2 and the two fields F1, F2 to the atom-field A1-F2 system. Then, we pay our attention to the time evolution of success probability of detecting processes and fidelity. Also, to determine the amount of entanglement of the generated entangled state in the swapping process, the linear entropy is evaluated and the effect of parameter m concerning the multiphoton transitions on these quantities is investigated, numerically. It is observed that, by increasing the number of photons in the transition process, one may obtain considerable improvement in the relevant quantities of the entanglement swapping. In detail, the satisfactorily acceptable values 1 and 0.5 corresponding to success probability and fidelity are obtained for most of the times during observing of the above-mentioned procedure. We concluded that the presented formalism in this paper is much more advantageous than our presentation model in our earlier work mentioned above.

  2. Comparison of two methods for locating single phase faults considering the ground resistivity

    OpenAIRE

    Mora Flórez, Juan José; García Osorio, Germán Darío; Pérez Londoño, Sandra Milena; Grupo de Investigación en Calidad de Energía Eléctrica y Estabilidad - ICE3

    2008-01-01

    Este artículo presenta la comparación de dos métodos de localización de fallas, considerando la resistividad del terreno y la resistencia de falla. Los métodos son el propuesto por un fabricante de software comercial y un método clásico basado en la estimación de la impedancia. Las pruebas consideran tres modelos de resistividad, a partir de medidas tomadas en campo. Los resultados en un sistema de 34.5 kV, muestran un mejor desempeño del método basado en la impedancia. Adicionalmente, lo...

  3. Air Force Compensation: Considering Some Options for Change

    National Research Council Canada - National Science Library

    Hosek, James

    2002-01-01

    ... what form. To learn more about what role these pays might play, we reviewed the Air Force's manpower situation, considered underlying causes of problems, tracked relevant trends in civilian wages, and examined...

  4. Chemical Data Reporting: Factors to Consider When Using the Database

    Science.gov (United States)

    The 2012 Chemical Data Reporting (CDR) database provides non-confidential information on the manufacture, import, processing, and use of chemicals in commerce at national and regional levels. This fact sheet highlights factors to consider.

  5. Considering Environmental and Occupational Stressors in Cumulative Risk Assessments

    Science.gov (United States)

    While definitions vary across the global scientific community, cumulative risk assessments (CRAs) typically are described as exhibiting a population focus and analyzing the combined risks posed by multiple stressors. CRAs also may consider risk management alternatives as an anal...

  6. 20 CFR 416.1872 - Who is considered a student.

    Science.gov (United States)

    2010-04-01

    ..., BLIND, AND DISABLED Relationship Who Is Considered A Student for Purposes of the Student Earned Income... old and you regularly attend school or college or training that is designed to prepare you for a...

  7. Psychological harm after PANE: NEPA's requirement to consider psychological damage

    International Nuclear Information System (INIS)

    Jordan, W.S. III

    1984-01-01

    In Metropolitan Edison Co. v. People Against Nuclear Energy (PANE), the Supreme Court held that the National Environmental Policy Act does not require the Nuclear Regulatory Commission (NRC) to consider the probable impact of its actions on psychological health. The Court's opinion, however, supports the conclusion that NEPA generally requires federal agencies to consider such probable impacts. This article examines the scope of federal responsibility following this decision. It delineates the causal relationship test that the Court adopted in PANE, and discusses possible obstacles to the consideration of psychological impacts under NEPA. It divides federal actions into four categories, then considers the benefits and burdens of the ruling using the NRC's responsibility to consider psychological health effects before licensing new nuclear reactors. 221 references

  8. Nurse entrepreneurship: an alternative career choice worth considering.

    Science.gov (United States)

    Sanoshy, J

    1998-07-01

    With consistent downsizing in today's healthcare arena, many nurses are considering alternative careers. Several ONS members have found creative ways to parlay their nursing education and experience into successful careers that are both fulfilling and profitable.

  9. The potential for new methods to assess human reproductive genotoxicity

    International Nuclear Information System (INIS)

    Mendelsohn, M.L.

    1987-09-01

    The immediate prospects are not good for practical methods for measuring the human heritable mutation rate. The methods discussed here range from speculative to impractical, and at best are sensitive enough only for large numbers of subjects. Given the rapid development of DNA methods and the current status of two-dimensional gel electrophoresis, there is some hope that the intermediate prospects may be better. In contrast, the prospects for useful cellular-based male germinal methods seem more promising and immediate. Effective specific locus methods for sperm are already conceivable and may be practical in a few years. Obviously such methods will not predict heritable effects definitively, but they will provide direct information on reproductive genotoxicity and should contribute significantly to many current medical and environmental situations where genetic damage is suspected. 22 refs

  10. The Challenge of Film Considered as Historical Research

    Directory of Open Access Journals (Sweden)

    Olaf Berg

    2011-04-01

    Full Text Available The article focuses on the use of film as a medium of historical research. It discusses the film "Shoah," directed by Claude Lanzmann, which is considered as a model for filmic history. It also looks into Robert Rosenstone's claim that people may consider filmmakers as historians and that people should derive theory from practice through analyzing how the past has been portrayed in films.

  11. A model for voltage collapse study considering load characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, L B [Companhia de Energia Eletrica da Bahia (COELBA), Salvador, BA (Brazil)

    1994-12-31

    This paper presents a model for analysis of voltage collapse and instability problem considering the load characteristics. The model considers fundamentally the transmission lines represented by exact from through the generalized constants A, B, C, D and the loads as function of the voltage, emphasizing the cases of constant power, constant current and constant impedance. the study treats of the system behavior on steady state and presents illustrative graphics about the problem. (author) 12 refs., 4 figs.

  12. Electron beam treatment planning: A review of dose computation methods

    International Nuclear Information System (INIS)

    Mohan, R.; Riley, R.; Laughlin, J.S.

    1983-01-01

    Various methods of dose computations are reviewed. The equivalent path length methods used to account for body curvature and internal structure are not adequate because they ignore the lateral diffusion of electrons. The Monte Carlo method for the broad field three-dimensional situation in treatment planning is impractical because of the enormous computer time required. The pencil beam technique may represent a suitable compromise. The behavior of a pencil beam may be described by the multiple scattering theory or, alternatively, generated using the Monte Carlo method. Although nearly two orders of magnitude slower than the equivalent path length technique, the pencil beam method improves accuracy sufficiently to justify its use. It applies very well when accounting for the effect of surface irregularities; the formulation for handling inhomogeneous internal structure is yet to be developed

  13. Considering Intermittent Dormancy in an Advanced Life Support Systems Architecture

    Science.gov (United States)

    Sargusingh, Miriam J.; Perry, Jay L.

    2017-01-01

    Many advanced human space exploration missions being considered by the National Aeronautics and Space Administration (NASA) include concepts in which in-space systems cycle between inhabited and uninhabited states. Managing the life support system (LSS) may be particularly challenged during these periods of intermittent dormancy. A study to identify LSS management challenges and considerations relating to dormancy is described. The study seeks to define concepts suitable for addressing intermittent dormancy states and to evaluate whether the reference LSS architectures being considered by the Advanced Exploration Systems (AES) Life Support Systems Project (LSSP) are sufficient to support this operational state. The primary focus of the study is the mission concept considered to be the most challenging-a crewed Mars mission with an extensive surface stay. Results from this study are presented and discussed.

  14. Considering lost sale in inventory routing problems for perishable goods

    DEFF Research Database (Denmark)

    Mirzaei, Samira; Seifi, Abbas

    2015-01-01

    , the average optimality gaps are less than 10.9% and 13.4% using linear and exponential lost sale functions, respectively. Furthermore, we show that the optimality gaps found by CPLEX grow exponentially with the problem size while those obtained by the proposed meta-heuristic algorithm increase linearly....... is considered as lost sale. The proposed model balances the transportation cost, the cost of inventory holding and lost sale. In addition to the usual inventory routing constraints, we consider the cost of lost sale as a linear or an exponential function of the inventory age. The proposed model is solved...

  15. Blood flow analysis with considering nanofluid effects in vertical channel

    Science.gov (United States)

    Noreen, S.; Rashidi, M. M.; Qasim, M.

    2017-06-01

    Manipulation of heat convection of copper particles in blood has been considered peristaltically. Two-phase flow model is used in a channel with insulating walls. Flow analysis has been approved by assuming small Reynold number and infinite length of wave. Coupled equations are solved. Numerical solution are computed for the pressure gradient, axial velocity function and temperature. Influence of attention-grabbing parameters on flow entities has been analyzed. This study can be considered as mathematical representation to the vibrance of physiological systems/tissues/organs provided with medicine.

  16. Purchasing an Encyclopedia: 12 Points To Consider. Fifth Edition.

    Science.gov (United States)

    American Library Association, Chicago, IL.

    This book discusses issues to consider when purchasing an encyclopedia and provides reviews of eight print encyclopedias, six CD-ROM encyclopedias, and one online encyclopedia. Each review provides an address and discusses the history, scope and treatment, and quality and currency of the encyclopedia; for CD-ROM encyclopedias, the database…

  17. Renovating Interior Office Space: What a Manager Needs To Consider.

    Science.gov (United States)

    Babey, Evelyn R.

    When planning an office renovation, a manager should design an office layout that is efficient and should consider the psychological aspects of office design, including sound level, color harmony, and lighting. The manager must also have a good understanding of all phases of the project plan and the timing involved. There are basically five phases…

  18. Biological effects of extreme environmental conditions. [considering limits of biosphere

    Science.gov (United States)

    Imshenetskiy, A. A.

    1975-01-01

    Actions of extreme physical and chemical space factors on microorganisms and plants are elaborated in order to establish limits for the biosphere. Considered are effects of low and high temperatures; ionizing and ultraviolet radiation; various gases; and effects of vibration, desiccation and acceleration.

  19. The "Make or Buy" Decision: Five Main Points to Consider

    Science.gov (United States)

    Archer, Mary Ann E.

    1978-01-01

    Five points which should be considered when making decisions about whether to purchase magnetic tapes for in-hours searching by batch processing, purchase terminals and contract with on-line vendors, or contract with information brokers for retrospective searching or SDI are availability of information in the most useful form, hardware and…

  20. Evaluation and purchase of confocal microscopes: numerous factors to consider.

    Science.gov (United States)

    Zucker, Robert M; Chua, Michael

    2010-10-01

    The purchase of a confocal microscope is a difficult decision. Many factors need to be considered, which include hardware, software, company, support, service, and price. These issues are discussed to help guide the purchasing process. © 2010 by John Wiley & Sons, Inc.

  1. Better Together: Considering Student Interfaith Leadership and Social Change

    Science.gov (United States)

    Campbell, William; Lane, Megan

    2014-01-01

    On campuses across the country, students and professional staff are considering student interfaith leadership as one way that students act on their core values to make a positive difference in the world. This kind of student leadership can be framed through student leadership models like the social change model of leadership development. Better…

  2. Concerns of the environment as considered in regional planning

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, W; Witzmann, K; Wilkes, P J; Singer, P; Steimann, F; Timmer, R; Ernst, W; Erbguth, W; Schlarmann, H

    1980-12-01

    Considering all the viewpoints and paying due attention to arguments of energy economy and the protection of nature and landscapes, water economy, town-planning, close-range recreation areas and tourism the project of developing the lower Salzach valley is seen to be unpracticable.

  3. Acute Neurological Symptoms During Hypobaric Exposure: Consider Cerebral Air Embolism

    NARCIS (Netherlands)

    Weenink, Robert P.; Hollmann, Markus W.; van Hulst, Robert A.

    2012-01-01

    WEENINK RP, HOLLMANN MW, VAN HULST RA. Acute neurological symptoms during hypobaric exposure: consider cerebral air embolism. Aviat Space Environ Med 2012; 83:1084-91. Cerebral arterial gas embolism (CAGE) is well known as a complication of invasive medical procedures and as a risk in diving and

  4. Considering Jumping Ship? A Pirate Looks at Retirement

    Science.gov (United States)

    Kilpatrick, Bob G.

    2011-01-01

    If you're like me, a "senior" faculty member at a public state university facing significant budget cuts, recently you've probably thought about leaving your current position for another faculty position in a different state. A possible reason for considering jumping ship is envisioning a clearer picture of your retirement as it nears on…

  5. 26 CFR 48.4161(a)-4 - Use considered sale.

    Science.gov (United States)

    2010-04-01

    ....4161(a)-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) MISCELLANEOUS EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Sporting Goods § 48.4161(a)-4 Use considered sale. For provisions relating to the tax on use of taxable articles by the manufacturer, producer, or...

  6. 26 CFR 48.4161(b)-3 - Use considered sale.

    Science.gov (United States)

    2010-04-01

    ....4161(b)-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) MISCELLANEOUS EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Sporting Goods § 48.4161(b)-3 Use considered sale. For provisions relating to the tax on use of taxable articles by the manufacturer, producer, or...

  7. 29 CFR 1990.132 - Factors to be considered.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) IDENTIFICATION, CLASSIFICATION, AND REGULATION OF POTENTIAL OCCUPATIONAL CARCINOGENS Priority Setting § 1990.132 Factors to be considered. (a) The setting of priorities is a complex matter which... respect to the setting of priorities. (b) Some factors which may be taken into account in setting...

  8. Breathing Clean : Considering the Switch to Natural Gas Buses

    OpenAIRE

    Kojima, Masami

    2001-01-01

    In response to emerging epidemiological evidence of the toxicity of diesel vehicular emissions, there is growing interest in substituting conventional diesel with much cleaner natural gas in cities where ambient concentrations of particulate matter are markedly higher than what is internationally considered acceptable. This paper compares the performance of natural gas and conventional die...

  9. As Endowment Values Plummet, Some Institutions Consider Suing Brokers

    Science.gov (United States)

    Masterson, Kathryn

    2008-01-01

    This article reports that as many as five colleges or charitable foundations whose endowments have suffered significant investment losses or were unable to access money in their accounts in recent months are considering legal action against their brokers or investment managers, alleging misrepresentation of risk or mismanagement. Jacob H.…

  10. "Unnecessary suffering": the cornerstone of animal protection legislation considered.

    Science.gov (United States)

    Radford, M

    1999-09-01

    Causing "unnecessary suffering" has been widely adopted in legislation to define criminal liability in respect of the treatment of animals. This article examines the way in which the term has been interpreted and applied by the courts, and considers its effectiveness in affording animals protection from abuse.

  11. Governing Bodies That Consider Joining or Creating Federations

    Science.gov (United States)

    Howarth, Eleanor

    2015-01-01

    This article reports the findings of a research study exploring what motivates governing bodies to consider joining or creating a federation, their experiences of the process and the barriers faced. The research methodology involved semi-structured telephone interviews, face-to-face interviews and analysis of relevant documentation. The varied…

  12. Considering Critical Turns in Research on Educational Leadership and Policy

    Science.gov (United States)

    Diem, Sarah; Young, Michelle D.

    2015-01-01

    Purpose: The purpose of this paper is to explore the use of critical policy analysis (CPA) in the fields of educational leadership and policy. In addition to exploring how CPA compares to traditional research approaches in educational leadership and policy, the authors consider the influence of long-established ways of knowing, why scholars choose…

  13. Considering bilingual dictionaries against a corpus. Do English ...

    African Journals Online (AJOL)

    This article investigates the extent to which four representatives of the latest generation of English-French / French-English dictionaries present "real English", i.e. actually used meanings of actually used English word patterns. The findings of a corpus study of the verb CONSIDER are confronted with the entries for this verb ...

  14. Life cycle cost analysis of wind power considering stochastic uncertainties

    International Nuclear Information System (INIS)

    Li, Chiao-Ting; Peng, Huei; Sun, Jing

    2014-01-01

    This paper presents a long-term cost analysis of wind power and compares its competitiveness to non-renewable generating technologies. The analysis considers several important attributes related to wind intermittency that are sometimes ignored in traditional generation planning or LCOE (levelized cost of energy) studies, including the need for more nameplate capacity due to intermittency, hourly fluctuations in wind outputs and cost for reserves. The competitiveness of wind power is assessed by evaluating four scenarios: 1) adding natural gas generating capacity to the power grid; 2) adding coal generating capacity to the power grid; 3) adding wind capacity to the power grid; and, 4) adding wind capacity and energy storage to the power grid where an energy storage device is used to cover wind intermittency. A case study in the state of Michigan is presented to demonstrate the use of the proposed methodology, in which a time horizon from 2010 to 2040 is considered. The results show that wind energy will still be more expensive than natural gas power plants in the next three decades, but will be cheaper than coal capacities if wind intermittency is mitigated. Furthermore, if the costs of carbon emissions and environmental externalities are considered, wind generation will be a competitive option for grid capacity expansion. - Highlights: • The competitiveness of wind power is analyzed via life cycle cost analysis. • Wind intermittency and reserve costs are explicitly considered in the analysis. • Results show that wind is still more expensive than natural gas power plants. • Wind can be cheaper than coal capacities if wind intermittency is mitigated. • Wind will be competitive if costs of carbon emissions are considered

  15. Optimal Control to Increase Energy Production of Wind Farm Considering Wake Effect and Lifetime Estimation

    DEFF Research Database (Denmark)

    Tian, Jie; Zhou, Dao; Su, Chi

    2017-01-01

    as an example. Due to the small range of the effective wake area, it is found that the energy production is almost the same. Finally, the pitch angle curve and active power curve are optimized according to the Maximum Energy Production (MEP) of a wind farm. Upon considering and contrasting the MPPT method...... to maximize the energy production of wind farms by considering the wake effect and the lifetime of wind turbine. It starts with the analysis of the pitch angle curve and active power curve seen from the Maximum Power Point Tracking (MPPT) of individual wind turbines. Taking the wake effect into account......, the pitch angle curve and active power curve are optimized with the aim of Maximum Power Generation (MPG) of the wind farm. Afterwards, considering the lifetime of wind turbines, a comparison is offered between the MPPT method and the MPG method for energy production using a simplified two-turbine wind farm...

  16. Structural applications of metal foams considering material and geometrical uncertainty

    Science.gov (United States)

    Moradi, Mohammadreza

    Metal foam is a relatively new and potentially revolutionary material that allows for components to be replaced with elements capable of large energy dissipation, or components to be stiffened with elements which will generate significant supplementary energy dissipation when buckling occurs. Metal foams provide a means to explore reconfiguring steel structures to mitigate cross-section buckling in many cases and dramatically increase energy dissipation in all cases. The microstructure of metal foams consists of solid and void phases. These voids have random shape and size. Therefore, randomness ,which is introduced into metal foams during the manufacturing processes, creating more uncertainty in the behavior of metal foams compared to solid steel. Therefore, studying uncertainty in the performance metrics of structures which have metal foams is more crucial than for conventional structures. Therefore, in this study, structural application of metal foams considering material and geometrical uncertainty is presented. This study applies the Sobol' decomposition of a function of many random variables to different problem in structural mechanics. First, the Sobol' decomposition itself is reviewed and extended to cover the case in which the input random variables have Gaussian distribution. Then two examples are given for a polynomial function of 3 random variables and the collapse load of a two story frame. In the structural example, the Sobol' decomposition is used to decompose the variance of the response, the collapse load, into contributions from the individual input variables. This decomposition reveals the relative importance of the individual member yield stresses in determining the collapse load of the frame. In applying the Sobol' decomposition to this structural problem the following issues are addressed: calculation of the components of the Sobol' decomposition by Monte Carlo simulation; the effect of input distribution on the Sobol' decomposition

  17. Combined Solar Charging Stations and Energy Storage Units Allocation for Electric Vehicles by Considering Uncertainties

    DEFF Research Database (Denmark)

    Yousefi Khanghah, Babak; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

    2017-01-01

    Electric vehicles (EVs) are becoming a key feature of smart grids. EVs will be embedded in the smart grids as a mobile load-storage with probabilistic behavior. In order to manage EVs as flexible loads, charging stations (CSs) have essential roles. In this paper, a new method for optimal sitting...... are considered based on time-of-use (TOU) demand response programs (DRPs). In order to solve the optimization problem considering uncertainty of load growth, electricity price, initial state of charge of batteries and solar power generation, genetic algorithm method using Monte-Carlo simulation is used...

  18. Considering Affective Responses towards Environments for Enhancing Location Based Services

    Science.gov (United States)

    Huang, H.; Gartner, G.; Klettner, S.; Schmidt, M.

    2014-04-01

    A number of studies in the field of environmental psychology show that humans perceive and evaluate their surroundings affectively. Some places are experienced as unsafe, while some others as attractive and interesting. Experiences from daily life show that many of our daily behaviours and decision-making are often influenced by this kind of affective responses towards environments. Location based services (LBS) are often designed to assist and support people's behaviours and decision-making in space. In order to provide services with high usefulness (usability and utility), LBS should consider these kinds of affective responses towards environments. This paper reports on the results of a research project, which studies how people's affective responses towards environments can be modelled and acquired, as well as how LBS can benefit by considering these affective responses. As one of the most popular LBS applications, mobile pedestrian navigation systems are used as an example for illustration.

  19. Transmission expansion in an oligopoly considering generation investment equilibrium

    DEFF Research Database (Denmark)

    Taheri, S. Saeid; Kazempour, Jalal; Seyedshenava, Seyedjalal

    2017-01-01

    the future generation investment actions. However, in such an oligopolistic market, each producer makes its own strategic generation investment decisions. This motivates the transmission system planner to consider the generation investment decision-making problem of all producers within its TEP model......Transmission expansion planning (TEP) is a sophisticated decision-making problem, especially in an oligopolistic electricity market in which a number of strategic (price-maker) producers compete together. A transmission system planner, who is in charge of making TEP decisions, requires considering....... This paper proposes a tri-level TEP decision-making model to be solved by the transmission system planner, whose objective is to maximize the social welfare of the market minus the expansion costs, and whose constraints are the transmission expansion limits as well as the generation investment equilibrium...

  20. Choosing the nuclear power option: Factors to be considered

    International Nuclear Information System (INIS)

    1998-01-01

    A need was expressed by Member States for guidance on policy issues to be addressed by decision makers considering the introduction of nuclear power programmes. This publication has been prepared by the IAEA, on the basis of past experience with nuclear power programmes in Member States and the current realities of the world nuclear regime, to provide information on political, governmental, economic, financial, technical and safety issues associated with planning and implementing a nuclear power programme. It highlights the main areas in which policies must be developed as well as the roles and responsibilities of the government, the plant owner and the national industry. For those interested in examining some of the issues in more depth, a list of related IAEA publications is provided in the bibliography. It is hoped that this guide will serve a useful purpose in assisting decision makers and governments in Member States considering the introduction of nuclear power programmes

  1. DYNAMIC OPTIMAL BUDGET ALLOCATION FOR INTEGRATED MARKETING CONSIDERING PERSISTENCE

    OpenAIRE

    SHIZHONG AI; RONG DU; QIYING HU

    2010-01-01

    Aiming at forming dynamic optimal integrated marketing policies, we build a budget allocation model considering both current effects and sustained ones. The model includes multiple time periods and multiple marketing tools which interact through a common resource pool as well as through delayed cross influences on each other's sales, reflecting the nature of "integrated marketing" and its dynamics. In our study, marginal analysis is used to illuminate the structure of optimal policy. We deriv...

  2. Malaysia: Political, Security, Economic, and Trade Issues Considered

    Science.gov (United States)

    2007-02-13

    general election. Key observers have also pointed to decisions by Parti-Islam sa- Malaysia (PAS), Parti Keadilan Rakyat , and the Democratic Action Party...Sultan fulfills this function. Each state has a state legislature. The lower house of Malaysia’s Parliament, the Dewan Rakyat , has 193 members elected...Order Code RL33878 Malaysia : Political, Security, Economic, and Trade Issues Considered February 13, 2007 Bruce Vaughn, Coordinator Specialist in

  3. Choosing the nuclear power option: Factors to be considered

    International Nuclear Information System (INIS)

    Gueorguiev, B.; Mahadeva Rao, K.V.

    2000-01-01

    To plan and develop a nuclear power program, policies must be formulated and decided at different stages and at different levels by the government and its organizations, by the utility and by other organizations in industry and research and education, each within its sphere of interest and influence. The purpose of this paper is to highlight areas where policy decisions are needed, the options available, what they mean and the contexts in which they should be considered. (author)

  4. CONSIDERING CHANGES IN WOOD UTILIZATION -A EUROPEAN PERSPECTIVE

    OpenAIRE

    Resch, Helmuth

    2008-01-01

    Worldwide, continuous change is evident. What impact does it have on the utilization of wood? What should be considered when educating professionals in Wood Science and Technology (WS&T)? Where did we come from and where do we need to go? .Throughout history, forests provided important social, ecological, and economic values. Wood utilization advanced along with an unprecedented and exciting industrial evolution and WS&T became an interdisciplinary field. Recently, stronger environmental conc...

  5. Considering Sustainable Degrowth from a Feminist, Transrational Perspective

    OpenAIRE

    Bock, Marisol C.

    2015-01-01

    Treball final de Màster Universitari en Estudis internacionals de Pau, Conflictes i Desenvolupament. Codi: SBG119. Curs acadèmic 2014-2015 Today's global interlocking crises in the economic, ecological and social realms point to the need for profound change. Sustainable degrowth supporters propose multiple alternatives to move away from the dominant economic growth model, which they consider as the underlying problem. In this thesis, I investigate the intersection of degrowth and ...

  6. Factors to consider in the selection of a calcium supplement.

    OpenAIRE

    Shangraw, R F

    1989-01-01

    Calcium supplements are widely used, yet many questions remain as to the absorption of various calcium salts. Because the solubility of many calcium salts is dependent upon pH, the type of salt used, the condition of the patient, and the time of administration should be considered. Studies show that many calcium supplements on the market today do not meet standards of quality established in the "U.S. Pharmacopeia" (USP). Consumers must be discerning about the products they purchase. Calcium s...

  7. [Lake eutrophication modeling in considering climatic factors change: a review].

    Science.gov (United States)

    Su, Jie-Qiong; Wang, Xuan; Yang, Zhi-Feng

    2012-11-01

    Climatic factors are considered as the key factors affecting the trophic status and its process in most lakes. Under the background of global climate change, to incorporate the variations of climatic factors into lake eutrophication models could provide solid technical support for the analysis of the trophic evolution trend of lake and the decision-making of lake environment management. This paper analyzed the effects of climatic factors such as air temperature, precipitation, sunlight, and atmosphere on lake eutrophication, and summarized the research results about the lake eutrophication modeling in considering in considering climatic factors change, including the modeling based on statistical analysis, ecological dynamic analysis, system analysis, and intelligent algorithm. The prospective approaches to improve the accuracy of lake eutrophication modeling with the consideration of climatic factors change were put forward, including 1) to strengthen the analysis of the mechanisms related to the effects of climatic factors change on lake trophic status, 2) to identify the appropriate simulation models to generate several scenarios under proper temporal and spatial scales and resolutions, and 3) to integrate the climatic factors change simulation, hydrodynamic model, ecological simulation, and intelligent algorithm into a general modeling system to achieve an accurate prediction of lake eutrophication under climatic change.

  8. Genomic cloud computing: legal and ethical points to consider.

    Science.gov (United States)

    Dove, Edward S; Joly, Yann; Tassé, Anne-Marie; Knoppers, Bartha M

    2015-10-01

    The biggest challenge in twenty-first century data-intensive genomic science, is developing vast computer infrastructure and advanced software tools to perform comprehensive analyses of genomic data sets for biomedical research and clinical practice. Researchers are increasingly turning to cloud computing both as a solution to integrate data from genomics, systems biology and biomedical data mining and as an approach to analyze data to solve biomedical problems. Although cloud computing provides several benefits such as lower costs and greater efficiency, it also raises legal and ethical issues. In this article, we discuss three key 'points to consider' (data control; data security, confidentiality and transfer; and accountability) based on a preliminary review of several publicly available cloud service providers' Terms of Service. These 'points to consider' should be borne in mind by genomic research organizations when negotiating legal arrangements to store genomic data on a large commercial cloud service provider's servers. Diligent genomic cloud computing means leveraging security standards and evaluation processes as a means to protect data and entails many of the same good practices that researchers should always consider in securing their local infrastructure.

  9. Rethinking the intensive care environment: considering nature in nursing practice.

    Science.gov (United States)

    Minton, Claire; Batten, Lesley

    2016-01-01

    With consideration of an environmental concept, this paper explores evidence related to the negative impacts of the intensive care unit environment on patient outcomes and explores the potential counteracting benefits of 'nature-based' nursing interventions as a way to improve care outcomes. The impact of the environment in which a patient is nursed has long been recognised as one determinant in patient outcomes. Whilst the contemporary intensive care unit environment contains many features that support the provision of the intensive therapies the patient requires, it can also be detrimental, especially for long-stay patients. This narrative review considers theoretical and evidence-based literature that supports the adoption of nature-based nursing interventions in intensive care units. Research and theoretical literature from a diverse range of disciplines including nursing, medicine, psychology, architecture and environmental science were considered in relation to patient outcomes and intensive care nursing practice. There are many nature-based interventions that intensive care unit nurses can implement into their nursing practice to counteract environmental stressors. These interventions can also improve the environment for patients' families and nurses. Intensive care unit nurses must actively consider and manage the environment in which nursing occurs to facilitate the best patient outcomes. © 2015 John Wiley & Sons Ltd.

  10. Land in China: Re-considering comparability in financial reporting

    Directory of Open Access Journals (Sweden)

    Ying Zhang

    2010-03-01

    Full Text Available This paper re-considers the notion of ‘comparability’ as it has been applied to the accounting standardharmonisation project and its implications for accounting practices that are emerging in China.Comparability is a concept that has been widely referred to within the accounting literature, but has remainedlargely unexplored. In order to encourage what Zeff (2007 described as “genuine comparability” we arguethat the underlying economic substance of an event should be the focus of our accounting choices in order toenable appropriate comparisons. If we focus too heavily on regulatory standardisation that prescribescomparable techniques without considering the broader economic context in which these are applied, theaccounting representations could mislead users. The techniques may distort representations of theunderlying economic substance of business activities, which would hinder the level of a genuinecomparability in global financial reporting. In order to explore this, given the unique legal status of land inChina, we consider how it is classified and represented in Chinese financial reports. This example shows thatthere are still significant challenges that need to be overcome in order to implement IFRS in China and thereare still substantial comparability problems for cross-border users.

  11. IMPROVEMENT OF BUSINESS PROCESSES OF THE ORGANIZATION CONSIDERING RISK

    Directory of Open Access Journals (Sweden)

    Дмитро Іванович БЕДРІЙ

    2015-05-01

    Full Text Available It is proposed to analyze the methods of optimization of business processes of the organization. The results of which is proposed to apply to the method of reengineering of business processes of the organization. Conclusions about the need to implement business process reengineering of the organization of the risk having an impact on its operations are made.

  12. Autism Diagnosis and Screening: Factors to Consider in Differential Diagnosis

    Science.gov (United States)

    Matson, Johnny L.; Beighley, Jennifer; Turygin, Nicole

    2012-01-01

    There has been an exponential growth in assessment methods to diagnose disorders on the autism spectrum. Many reasons for this trend exist and include advancing knowledge on how to make a diagnosis, the heterogeneity of the spectrum, the realization that different methods may be needed based on age and intellectual disability. Other factors…

  13. Generation Expansion Planning Considering Integrating Large-scale Wind Generation

    DEFF Research Database (Denmark)

    Zhang, Chunyu; Ding, Yi; Østergaard, Jacob

    2013-01-01

    necessitated the inclusion of more innovative and sophisticated approaches in power system investment planning. A bi-level generation expansion planning approach considering large-scale wind generation was proposed in this paper. The first phase is investment decision, while the second phase is production...... optimization decision. A multi-objective PSO (MOPSO) algorithm was introduced to solve this optimization problem, which can accelerate the convergence and guarantee the diversity of Pareto-optimal front set as well. The feasibility and effectiveness of the proposed bi-level planning approach and the MOPSO...

  14. Design of a solar concentrator considering arbitrary surfaces

    Science.gov (United States)

    Jiménez-Rodríguez, Martín.; Avendaño-Alejo, Maximino; Verduzco-Grajeda, Lidia Elizabeth; Martínez-Enríquez, Arturo I.; García-Díaz, Reyes; Díaz-Uribe, Rufino

    2017-10-01

    We study the propagation of light in order to efficiently redirect the reflected light on photocatalytic samples placed inside a commercial solar simulator, and we have designed a small-scale prototype of Cycloidal Collectors (CCs), resembling a compound parabolic collector. The prototype consists of either cycloidal trough or cycloidal collector having symmetry of rotation, which has been designed considering an exact ray tracing assuming a bundle of rays propagating parallel to the optical axis and impinging on a curate cycloidal surface, obtaining its caustic surface produced by reflection.

  15. Game interrupted: The rationality of considering the future

    Directory of Open Access Journals (Sweden)

    Brandon Almy

    2013-09-01

    Full Text Available The ``problem of points'', introduced by Paccioli in 1494 and solved by Pascal and Fermat 160 years later, inspired the modern concept of probability. Incidentally, the problem also shows that rational decision-making requires the consideration of future events. We show that naive responses to the problem of points are more future oriented and thus more rational in this sense when the problem itself is presented in a future frame instead of the canonical past frame. A simple nudge is sufficient to make decisions more rational. We consider the implications of this finding for hypothesis testing and predictions of replicability.

  16. Fanconi Anemia: A Rarely Considered Cause of Macrocytosis During Childhood.

    Science.gov (United States)

    Aslan, Deniz

    2017-10-01

    We describe a Turkish boy newly diagnosed with Fanconi anemia with mutation in the FANCA gene. The patient, with normal clinical phenotype and negative chromosomal breakage test result, presented with macrocytosis. No clinical or laboratory changes were observed in a follow-up period of 4 years. The diagnosis was confirmed molecularly after a prolonged and exhaustive investigation. He was found to be a compound heterozygote for 2 mutations in the FANCA gene (1 of which is novel, c.4261-2A>C). We present this experience to alert physicians that Fanconi anemia should be considered in the differential diagnosis of otherwise unexplained macrocytosis during childhood.

  17. Fuzzy Networked Control Systems Design Considering Scheduling Restrictions

    Directory of Open Access Journals (Sweden)

    H. Benítez-Pérez

    2012-01-01

    known a priory but from a dynamic real-time behavior. To do so, the use of priority dynamic Priority exchange scheduling is performed. The objective of this paper is to show a way to tackle multiple time delays that are bounded and the dynamic response from real-time scheduling approximation. The related control law is designed considering fuzzy logic approximation for nonlinear time delays coupling, where the main advantage is the integration of this behavior through extended state space representation keeping certain linear and bounded behavior and leading to a stable situation during events presentation by guaranteeing stability through Lyapunov.

  18. Evaluating the capacity value of wind power considering transmission and operational constraints

    International Nuclear Information System (INIS)

    Gil, Esteban; Aravena, Ignacio

    2014-01-01

    Highlights: • Discussion of power system adequacy and the capacity value of wind power. • Method for estimating capacity value of wind power is proposed. • Monte Carlo simulation used to consider transmission and operational constraints. • Application of the method to the Chilean Northern Interconnected System (SING). - Abstract: This paper presents a method for estimating the capacity value of wind considering transmission and operational constraints. The method starts by calculating a metric for system adequacy by repeatedly simulating market operations in a Monte Carlo scheme that accounts for forced generator outages, wind resource variability, and operational conditions. Then, a capacity value calculation that uses the simulation results is proposed, and its application to the Chilean Northern Interconnected System (SING) is discussed. A comparison of the capacity value for two different types of wind farms is performed using the proposed method, and the results are compared with the method currently used in Chile and the method recommended by the IEEE. The method proposed in the paper captures the contribution of the variable generation resources to power system adequacy more accurately than the method currently employed in the SING, and showed capable of taking into account transmission and operational constraints

  19. Redesign of a supply network by considering stochastic demand

    Directory of Open Access Journals (Sweden)

    Juan Camilo Paz

    2015-09-01

    Full Text Available This paper presents the problem of redesigning a supply network of large scale by considering variability of the demand. The central problematic takes root in determining strategic decisions of closing and adjusting of capacity of some network echelons and the tactical decisions concerning to the distribution channels used for transporting products. We have formulated a deterministic Mixed Integer Linear Programming Model (MILP and a stochastic MILP model (SMILP whose objective functions are the maximization of the EBITDA (Earnings before Interest, Taxes, Depreciation and Amortization. The decisions of Network Design on stochastic model as capacities, number of warehouses in operation, material and product flows between echelons, are determined in a single stage by defining an objective function that penalizes unsatisfied demand and surplus of demand due to demand changes. The solution strategy adopted for the stochastic model is a scheme denominated as Sample Average Approximation (SAA. The model is based on the case of a Colombian company dedicated to production and marketing of foodstuffs and supplies for the bakery industry. The results show that the proposed methodology was a solid reference for decision support regarding to the supply networks redesign by considering the expected economic contribution of products and variability of the demand.

  20. Decisional conflict among women considering antidepressant medication use in pregnancy.

    Science.gov (United States)

    Walton, Georgia D; Ross, Lori E; Stewart, Donna E; Grigoriadis, Sophie; Dennis, Cindy-Lee; Vigod, Simone

    2014-12-01

    The purpose of this study was to examine decision-making among women considering antidepressant medication use in pregnancy. Decisional conflict was assessed using the Decisional Conflict Scale (DCS) among pregnant women considering antidepressant medication treatment (N = 40). Overall DCS and subscale scores were compared between women who were antidepressant users and non-users. Semi-structured interviews (N = 10) explored barriers and facilitators of decision-making. Twenty-one women (52 %) had moderate or high decisional conflict (DCS ≥ 25). Overall DCS scores did not differ between groups, but antidepressant use was associated with feeling more adequately informed (subscale mean 17.5, SD 17.9 vs. 42.1, SD 23.8, p = 0.001) and clear about values (subscale mean 16.7, SD 15.1 vs. 29.8, SD 24.0, p = 0.043). Barriers to decision-making were (1) difficulty weighing maternal versus infant health, (2) lack of high quality information, (3) negative external influences, and (4) emotional reactions to decision-making. Facilitators were (1) interpersonal supports, (2) accessible subspecialty care, and (3) severe depressive symptoms. Many pregnant women facing decisions regarding antidepressant medication use experience decisional conflict. Interventions that provide accurate information, assistance with weighing risks and benefits of treatment, management of problematic external influences, and emotional support may reduce decisional conflict and facilitate the decision-making process.

  1. Strategic wind power trading considering rival wind power production

    DEFF Research Database (Denmark)

    Exizidis, Lazaros; Kazempour, Jalal; Pinson, Pierre

    2016-01-01

    In an electricity market with high share of wind power, it is expected that wind power producers may exercise market power. However, wind producers have to cope with wind’s uncertain nature in order to optimally offer their generation, whereas in a market with more than one wind producers, uncert...... depending on the rival’s wind generation, given that its own expected generation is not high. Finally, as anticipated, expected system cost is higher when both wind power producers are expected to have low wind power generation......In an electricity market with high share of wind power, it is expected that wind power producers may exercise market power. However, wind producers have to cope with wind’s uncertain nature in order to optimally offer their generation, whereas in a market with more than one wind producers......, uncertainty of rival wind power generation should also be considered. Under this context, this paper addresses the impact of rival wind producers on the offering strategy and profits of a pricemaker wind producer. A stochastic day-ahead market setup is considered, which optimizes the day-ahead schedules...

  2. Assessment of senior pupils’ physical fitness considering physical condition indicators

    Directory of Open Access Journals (Sweden)

    I.R. Bodnar

    2016-12-01

    Full Text Available Consideration of physical condition indicators in assessment pupils’ physical fitness permits to differentiate training and health restoration processes at physical culture lessons. Purpose: to substantiate criteria for pupils’ physical fitness assessment, considering their physical condition indicators. Material: in the research 10-11 form pupils (n=406; 211boys and 195 girls participated. After physical fitness testing by requirement of acting programs we carried out diagnostic of pupils’ psycho-emotional state. Results: by results of physical; fitness we observed substantial deviation from universal law of normal distribution. It was found that physical condition indicators of most pupils are beyond normal. It was also determined that the most informative indicators are body length, chest circumference and body relative mass. We substantiated that it is necessary to consider physical condition indicators, when determining physical fitness level. We also substantiated and worked out differentiated normative for assessment pupils’ physical fitness. Conclusions: testing without consideration physical condition indicators does not facilitate pupils’ motivation for further physical self-perfection. Such testing results in high situational anxiety and unfavorable psycho-emotional state of pupils.

  3. An information propagation model considering incomplete reading behavior in microblog

    Science.gov (United States)

    Su, Qiang; Huang, Jiajia; Zhao, Xiande

    2015-02-01

    Microblog is one of the most popular communication channels on the Internet, and has already become the third largest source of news and public opinions in China. Although researchers have studied the information propagation in microblog using the epidemic models, previous studies have not considered the incomplete reading behavior among microblog users. Therefore, the model cannot fit the real situations well. In this paper, we proposed an improved model entitled Microblog-Susceptible-Infected-Removed (Mb-SIR) for information propagation by explicitly considering the user's incomplete reading behavior. We also tested the effectiveness of the model using real data from Sina Microblog. We demonstrate that the new proposed model is more accurate in describing the information propagation in microblog. In addition, we also investigate the effects of the critical model parameters, e.g., reading rate, spreading rate, and removed rate through numerical simulations. The simulation results show that, compared with other parameters, reading rate plays the most influential role in the information propagation performance in microblog.

  4. Development of advanced JGIS considering qualify management and project management

    International Nuclear Information System (INIS)

    Kawachi, Susumu; Ohi, Takao; Kawamura, Makoto; Ishihara, Yoshinao; Ebina, Takanori

    2008-03-01

    A system for managing and integrating the technical information of R and D was developed (JGIS: JAEA Geological Disposal Information Integration System). The subjects are to improve the usability as the system and the usability to record the information and the data in order to display the function of the system sufficiently and in order to enable the practical use of the system. In this study the aims are to display the function of JGIS and to enable the researchers as the users to recognize the significance of using JGIS. We built the conceptual design in order to implement the function of quality management and project management to JGIS. We considered that researchers could access the portal site of the research projects which were set as the WBS (Work Breakdown Structure) items and could confirm which WBS item the research project belonged to in the whole plan. We also considered that the research projects could be managed by using the conformity assessment sheets which were adopted for the quality management. The appendix contains the example of application of real projects to JGIS and the user's manual of JGIS (Example of a study of potential impact of natural phenomena). We demonstrated that researchers could confirm which WBS item the research project related to in JGIS and could manage the quality of the research projects by using the conformity assessment sheets in JGIS. (author)

  5. Modeling of flexible reciprocating compressor considering the crosshead subsidence

    Science.gov (United States)

    Xue, Xiaogang; Liu, Shulin; Sun, Xin

    2018-01-01

    Crank-slider mechanisms are important parts of heavy duty machines, including reciprocating compressors, combustion motors. This paper targets on the dynamic response of the crosshead in a reciprocating compressor, taking into consideration the crosshead deviation from the original level. The traditional model of the compressor is usually a slider-mechanism system without considering the deflection of the crosshead, thus neglecting the influence of the piston rod, which has some flexible features. In this paper, a rigid-flexible model of slider-crank is described theoretically, using the commercial software MATLAB, where the crank, connecting rod and crosshead are treated as rigid bodies, while the piston rod connected to the crosshead is considered as a flexible body. The dynamic response of the mechanism with the crosshead subsidence is discussed detailedly in this paper. After calculated theoretically, the MATLAB simulation showed that the dynamic response of the crosshead will be greatly influenced if the crosshead subsided from the original level. Also, the influence of the crosshead subsidence was also investigated, and some extra vibration of the crosshead arises.

  6. Which Social Values Are Considered in Iranian Health System?

    Science.gov (United States)

    Rashidian, Arash; Arab, Mohammad; Vaez Mahdavi, Mohammadreza; Ashtarian, Koimars; Mostafavi, Hakimeh

    2018-05-01

    Health systems have a set of limited resources for meeting the needs of communities. Health priority setting based on criteria and values is inevitable in such situation. This paper aims to identify the social values that are considered in Iranian health system. This qualitative study was conducted in 3 steps including collecting national documents and literature review, interviewing key informants, and a 2 round Delphi. Interviews and documents were analyzed through thematic framework analysis. Statistical guidance was applied for determining consensus cut-off in Delphi technique. Five social values including freedom of choice, equity, solidarity, severity of disease(s), and burden of disease(s) were considered more important than other values in the health priority setting decisions. Moreover, 2 non-value based factors including conflict of interest and lobbying had a high effect on decision making. Most health policy makers decide based on Egalitarian school, but restriction of resources in the country decreases the outcome. Moreover, personal judgments and preferences sometimes affect their decisions. It seems that developing a value-based framework and making it as a national guidance could have affirmative effect on health administers decisions. © 2018 The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  7. Streamside policies for headwater channels: an example considering debris flows in the Oregon coastal province.

    Science.gov (United States)

    K.M. Burnett; D.J. Miller

    2007-01-01

    Headwater streams differ in susceptibility to debris flows and thus in importance as wood and sediment sources for larger rivers. Identifying and appropriately managing the most susceptible headwater streams is of interest. We developed and illustrated a method to delineate alternative aquatic conservation emphasis zones (ACEZs) considering probabilities for traversal...

  8. Children and Pesticides: New Approach to Considering Risk Is Partly in Place. Report to Congressional Requesters.

    Science.gov (United States)

    Heinrich, Janet

    The Food Quality Protection Act of 1996 (FQPA) requires that the Environmental Protection Agency (EPA), which regulates the use of pesticides at the federal level, reevaluate the amounts of pesticide residues allowed on or in food. The EPA immediately began efforts to consider the additional safety factor for children, using available methods and…

  9. Modal method for crack identification applied to reactor recirculation pump

    International Nuclear Information System (INIS)

    Miller, W.H.; Brook, R.

    1991-01-01

    Nuclear reactors have been operating and producing useful electricity for many years. Within the last few years, several plants have found cracks in the reactor coolant pump shaft near the thermal barrier. The modal method and results described herein show the analytical results of using a Modal Analysis test method to determine the presence, size, and location of a shaft crack. The authors have previously demonstrated that the test method can analytically and experimentally identify shaft cracks as small as five percent (5%) of the shaft diameter. Due to small differences in material property distribution, the attempt to identify cracks smaller than 3% of the shaft diameter has been shown to be impractical. The rotor dynamics model includes a detailed motor rotor, external weights and inertias, and realistic total support stiffness. Results of the rotor dynamics model have been verified through a comparison with on-site vibration test data

  10. Strength Estimation of Die Cast Beams Considering Equivalent Porous Defects

    Energy Technology Data Exchange (ETDEWEB)

    Park, Moon Shik [Hannam Univ., Daejeon (Korea, Republic of)

    2017-05-15

    As a shop practice, a strength estimation method for die cast parts is suggested, in which various defects such as pores can be allowed. The equivalent porosity is evaluated by combining the stiffness data from a simple elastic test at the part level during the shop practice and the theoretical stiffness data, which are defect free. A porosity equation is derived from Eshelby's inclusion theory. Then, using the Mori-Tanaka method, the porosity value is used to draw a stress-strain curve for the porous material. In this paper, the Hollomon equation is used to capture the strain hardening effect. This stress-strain curve can be used to estimate the strength of a die cast part with porous defects. An elastoplastic theoretical solution is derived for the three-point bending of a die cast beam by using the plastic hinge method as a reference solution for a part with porous defects.

  11. A topology optimization method based on the level set method for the design of negative permeability dielectric metamaterials

    DEFF Research Database (Denmark)

    Otomori, Masaki; Yamada, Takayuki; Izui, Kazuhiro

    2012-01-01

    This paper presents a level set-based topology optimization method for the design of negative permeability dielectric metamaterials. Metamaterials are artificial materials that display extraordinary physical properties that are unavailable with natural materials. The aim of the formulated...... optimization problem is to find optimized layouts of a dielectric material that achieve negative permeability. The presence of grayscale areas in the optimized configurations critically affects the performance of metamaterials, positively as well as negatively, but configurations that contain grayscale areas...... are highly impractical from an engineering and manufacturing point of view. Therefore, a topology optimization method that can obtain clear optimized configurations is desirable. Here, a level set-based topology optimization method incorporating a fictitious interface energy is applied to a negative...

  12. What makes staff consider leaving the health service in Malawi?

    Science.gov (United States)

    Chimwaza, Wanangwa; Chipeta, Effie; Ngwira, Andrew; Kamwendo, Francis; Taulo, Frank; Bradley, Susan; McAuliffe, Eilish

    2014-03-19

    Malawi faces a severe shortage of health workers, a factor that has contributed greatly to high maternal mortality in the country. Most clinical care is performed by mid-level providers (MLPs). While utilization of these cadres in providing health care is a solution to the current shortages, demotivating factors within the Malawian health system are pushing them into private, non-governmental, and other non-health related positions. This study aims to highlight these demotivating factors by exploring the critical aspects that influence MLPs' intention to leave their jobs. This descriptive qualitative study formed part of the larger Health Systems Strengthening for Equity (HSSE) study. Data presented in this paper were collected in Malawi using the Critical Incident Analysis tool. Participants were asked to narrate an incident that had happened during the past three months which had made them seriously consider leaving their job. Data were subjected to thematic analysis using NVivo 8 software. Of the 84 respondents who participated in a Critical Incident Analysis interview, 58 respondents (69%) indicated they had experienced a demotivating incident in the previous three months that had made them seriously consider leaving their job. The most commonly cited critical factors were being treated unfairly or with disrespect, lack of recognition of their efforts, delays and inconsistencies in salary payments, lack of transparent processes and criteria for upgrading or promotion, and death of patients. Staff motivation and an enabling environment are crucial factors for retaining MLPs in the Malawian health system. This study revealed key 'tipping points' that drive staff to seriously consider leaving their jobs. Many of the factors underlying these critical incidents can be addressed by improved management practices and the introduction of fair and transparent policies. Managers need to be trained and equipped with effective managerial skills and staff should have access

  13. Risk Assessment of Power System considering the CPS of Transformers

    Science.gov (United States)

    Zhou, Long; Peng, Zewu; Liu, Xindong; Li, Canbing; Chen, Can

    2018-02-01

    This paper constructs a risk assessment framework of power system for device-level information security, analyzes the typical protection configuration of power transformers, and takes transformer gas protection and differential protection as examples to put forward a method that analyzes the cyber security in electric power system, which targets transformer protection parameters. We estimate the risk of power system accounting for the cyber security of transformer through utilizing Monte Carlo method and two indexes, which are the loss of load probability and the expected demand not supplied. The proposed approach is tested with IEEE 9 bus system and IEEE 118 bus system.

  14. Separation and utilization of fission products considering economic aspects

    International Nuclear Information System (INIS)

    Beer, M.; Gorski, B.; Hennrich, M.; Pfrepper, G.; Richter, M.

    1982-01-01

    The quantity of usable fission products which will be obtained by nuclear fission till the year 2000 is estimated on the basis of prognostics for the development of nuclear energy in the world considering especially the development in the U.S.S.R. and the CMEA. The possibilities of utilization of cesium as gamma-ray source are discussed, and the present fields of application of palladium and the development of its price on the world market are shown. The fields of application of technetium, which wasn't available as artificial element in a greater quantity till now, have to be developed. The economic estimations base on data of a project for the separation of fission products in connection with a reprocessing plant, which was developed in the U.S.A. in 1978. The data show, that it is possible to produce the platinum metals and cesium with profit, the same can be expected for technetium. (author)

  15. MHD simulations of coronal dark downflows considering thermal conduction

    Science.gov (United States)

    Zurbriggen, E.; Costa, A.; Esquivel, A.; Schneiter, M.; Cécere, M.

    2017-10-01

    While several scenarios have been proposed to explain supra-arcade downflows (SADs) observed descending through turbulent hot regions, none of them have systematically addressed the consideration of thermal conduction. The SADs are known to be voided cavities. Our model assumes that SADs are triggered by bursty localized reconnection events that produce non-linear waves generating the voided cavity. These subdense cavities are sustained in time because they are hotter than their surrounding medium. Due to the low density and large temperature values of the plasma we expect the thermal conduction to be an important process. Our main aim here is to study if it is possible to generate SADs in the framework of our model considering thermal conduction. We carry on 2D MHD simulations including anisotropic thermal conduction, and find that if the magnetic lines envelope the cavities, they can be isolated from the hot environment and be identified as SADs.

  16. CONSIDERING ANTI-PIRACY SHIP SECURITY: CITADEL DESIGN AND USE

    Directory of Open Access Journals (Sweden)

    L. Carral

    2015-09-01

    Full Text Available As piracy continues to pose a threat to the shipping industry, a number of measures for protecting ships, cargo and crew will need to be implemented. Along with other steps, such as deploying military rescue teams, securing the crew within a ship’s citadel has proved to be a highly effective form of self-protection against hostage-taking by pirates. From a design standpoint, aspects that should be considered include the location and dimensions of the citadel, the maximum time crew can stay within it and the specific requirements for various elements of the ship or citadel equipment. Exploiting data on pirate attacks recently occurring in High Risk Areas, this article analyses the design and use of the citadel as a self-protection measure against piracy. As a conclusion, various requirements for these structures are recommended.

  17. Epidemic spread in bipartite network by considering risk awareness

    Science.gov (United States)

    Han, She; Sun, Mei; Ampimah, Benjamin Chris; Han, Dun

    2018-02-01

    Human awareness plays an important role in the spread of infectious diseases and the control of propagation patterns. Exploring the interplay between human awareness and epidemic spreading is a topic that has been receiving increasing attention. Considering the fact, some well-known diseases only spread between different species we propose a theoretical analysis of the Susceptible-Infected-Susceptible (SIS) epidemic spread from the perspective of bipartite network and risk aversion. Using mean field theory, the epidemic threshold is calculated theoretically. Simulation results are consistent with the proposed analytic model. The results show that, the final infection density is negative linear with the value of individuals' risk awareness. Therefore, the epidemic spread could be effectively suppressed by improving individuals' risk awareness.

  18. Re-considering the Economics of Photovoltaic Power

    Energy Technology Data Exchange (ETDEWEB)

    Bazilian, M. [International Institute for Applied Systems Analysis IIASA, Laxenburg (Austria); Onyeji, I. [United Nations Industrial Development Organization UNIDO, Vienna (Austria); Liebreich, M.; Chase, J. [Bloomberg New Energy Finance BNEF, London (United Kingdom); MacGill, I. [University of New South Wales, Sydney (Australia); Shah, J. [KMR Infrastructure, Washington DC (United States); Gielen, D. [International Renewable Energy Agency IRENA, IITC, Bonn (Germany); Arent, D. [Joint Institute for Strategic Energy Analysis, Colorado (United States); Landfear, D. [AGL Energy Limited, Sydney (Australia); Zhengrong, S. [Suntech Power Holdings, Wuxi (China)

    2012-05-15

    We briefly consider the recent dramatic reductions in the underlying costs and market prices of solar photovoltaic (PV) systems, and their implications for decision-makers. In many cases, current PV costs and the associated market and technological shifts witnessed in the industry have not been fully noted by decision-makers. The perception persists that PV is prohibitively expensive, and still has not reached competitiveness? We find that the commonly used analytical comparators for PV vis a vis other power generation options may add further confusion. In order to help dispel existing misconceptions, we provide some level of transparency on the assumptions, inputs and parameters in calculations relating to the economics of PV. The paper is aimed at informing policy makers, utility decision-makers, investors and advisory services, in particular in high-growth developing countries, as they weigh the suite of power generation options available to them.

  19. Nonlinear Dynamic Model of PMBLDC Motor Considering Core Losses

    DEFF Research Database (Denmark)

    Fasil, Muhammed; Mijatovic, Nenad; Jensen, Bogi Bech

    2017-01-01

    The phase variable model is used commonly when simulating a motor drive system with a three-phase permanent magnet brushless DC (PMBLDC) motor. The phase variable model neglects core losses and this affects its accuracy when modelling fractional-slot machines. The inaccuracy of phase variable mod...... on the detailed analysis of the flux path and the variation of flux in different components of the machine. A prototype of fractional slot axial flux PMBLDC in-wheel motor is used to assess the proposed nonlinear dynamic model....... of fractional-slot machines can be attributed to considerable armature flux harmonics, which causes an increased core loss. This study proposes a nonlinear phase variable model of PMBLDC motor that considers the core losses induced in the stator and the rotor. The core loss model is developed based...

  20. Considering sex and gender in Alzheimer disease and other dementias.

    Science.gov (United States)

    Podcasy, Jessica L; Epperson, C Neill

    2016-12-01

    Suffering related to dementia is multifaceted because cognitive and physical functioning slowly deteriorates. Advanced age and sex, two of the most prominent risk factors for dementia, are not modifiable. Lifestyle factors such as smoking, excessive alcohol use, and poor diet modulate susceptibility to dementia in both males and females. The degree to which the resulting health conditions (eg, obesity, type 2 diabetes, and cardiovascular disease) impact dementia risk varies by sex. Depending on the subtype of dementia, the ratio of male to female prevalence differs. For example, females are at greater risk of developing Alzheimer disease dementia, whereas males are at greater risk of developing vascular dementia. This review examines sex and gender differences in the development of dementia with the goal of highlighting factors that require further investigation. Considering sex as a biological variable in dementia research promises to advance our understanding of the pathophysiology and treatment of these conditions.

  1. A new car-following model considering velocity anticipation

    International Nuclear Information System (INIS)

    Jun-Fang, Tian; Bin, Jia; Xin-Gang, Li; Zi-You, Gao

    2010-01-01

    The full velocity difference model proposed by Jiang et al. [2001 Phys. Rev. E 64 017101] has been improved by introducing velocity anticipation. Velocity anticipation means the follower estimates the future velocity of the leader. The stability condition of the new model is obtained by using the linear stability theory. Theoretical results show that the stability region increases when we increase the anticipation time interval. The mKdV equation is derived to describe the kink–antikink soliton wave and obtain the coexisting stability line. The delay time of car motion and kinematic wave speed at jam density are obtained in this model. Numerical simulations exhibit that when we increase the anticipation time interval enough, the new model could avoid accidents under urgent braking cases. Also, the traffic jam could be suppressed by considering the anticipation velocity. All results demonstrate that this model is an improvement on the full velocity difference model. (general)

  2. Considering sex and gender in Alzheimer disease and other dementias

    Science.gov (United States)

    Podcasy, Jessica L.; Epperson, C. Neill

    2016-01-01

    Suffering related to dementia is multifaceted because cognitive and physical functioning slowly deteriorates. Advanced age and sex, two of the most prominent risk factors for dementia, are not modifiable. Lifestyle factors such as smoking, excessive alcohol use, and poor diet modulate susceptibility to dementia in both males and females. The degree to which the resulting health conditions (eg, obesity, type 2 diabetes, and cardiovascular disease) impact dementia risk varies by sex. Depending on the subtype of dementia, the ratio of male to female prevalence differs. For example, females are at greater risk of developing Alzheimer disease dementia, whereas males are at greater risk of developing vascular dementia. This review examines sex and gender differences in the development of dementia with the goal of highlighting factors that require further investigation. Considering sex as a biological variable in dementia research promises to advance our understanding of the pathophysiology and treatment of these conditions. PMID:28179815

  3. Turbulent lubrication theory considering the surface roughness effects, 2

    International Nuclear Information System (INIS)

    Hashimoto, Hiromu; Wada, Sanae; Kobayashi, Toshinobu.

    1990-01-01

    This second paper describes an application of the generalized turbulent lubrication theory considering the surface roughness effects, which is developed in the previous paper, to the finite-width journal bearings. In the numerical analysis, the nonlinear equations for the modified turbulence coefficients are simplified to save a computation time within a satisfactory accuracy under the assumption that the shear flow is superior to the pressure flow in the turbulent lubrication films. The numerical results of pressure distribution, Sommerfeld number, attitude angle, friction coefficient and flow rate for the Reynolds number of Re=2000, 5000 and 10000 are indicated in graphic form for various values of relative roughness, and the effects of surface roughness on these static performance characteristics are discussed. Moreover, the eccentricity ratio and attitude angle of the journal bearings with homogeneous rough surface are obtained experimentally for a wide range of Sommerfeld number, and the experimental results are compared with theoretical results. (author)

  4. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III.

    1995-01-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the U.S. Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. The preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping. (author)

  5. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III

    1994-11-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the US Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. Preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping

  6. Performance Optimization of Irreversible Air Heat Pumps Considering Size Effect

    Science.gov (United States)

    Bi, Yuehong; Chen, Lingen; Ding, Zemin; Sun, Fengrui

    2018-06-01

    Considering the size of an irreversible air heat pump (AHP), heating load density (HLD) is taken as thermodynamic optimization objective by using finite-time thermodynamics. Based on an irreversible AHP with infinite reservoir thermal-capacitance rate model, the expression of HLD of AHP is put forward. The HLD optimization processes are studied analytically and numerically, which consist of two aspects: (1) to choose pressure ratio; (2) to distribute heat-exchanger inventory. Heat reservoir temperatures, heat transfer performance of heat exchangers as well as irreversibility during compression and expansion processes are important factors influencing on the performance of an irreversible AHP, which are characterized with temperature ratio, heat exchanger inventory as well as isentropic efficiencies, respectively. Those impacts of parameters on the maximum HLD are thoroughly studied. The research results show that HLD optimization can make the size of the AHP system smaller and improve the compactness of system.

  7. Calculation of the Connected Dominating Set Considering Vertex Importance Metrics

    Directory of Open Access Journals (Sweden)

    Francisco Vazquez-Araujo

    2018-01-01

    Full Text Available The computation of a set constituted by few vertices to define a virtual backbone supporting information interchange is a problem that arises in many areas when analysing networks of different natures, like wireless, brain, or social networks. Recent papers propose obtaining such a set of vertices by computing the connected dominating set (CDS of a graph. In recent works, the CDS has been obtained by considering that all vertices exhibit similar characteristics. However, that assumption is not valid for complex networks in which their vertices can play different roles. Therefore, we propose finding the CDS by taking into account several metrics which measure the importance of each network vertex e.g., error probability, entropy, or entropy variation (EV.

  8. Personalized e-Learning Environments: Considering Students' Contexts

    Science.gov (United States)

    Eyharabide, Victoria; Gasparini, Isabela; Schiaffino, Silvia; Pimenta, Marcelo; Amandi, Analía

    Personalization in e-learning systems is vital since they are used by a wide variety of students with different characteristics. There are several approaches that aim at personalizing e-learning environments. However, they focus mainly on technological and/or networking aspects without caring of contextual aspects. They consider only a limited version of context while providing personalization. In our work, the objective is to improve e-learning environment personalization making use of a better understanding and modeling of the user’s educational and technological context using ontologies. We show an example of the use of our proposal in the AdaptWeb system, in which content and navigation recommendations are provided depending on the student’s context.

  9. Should compulsive sexual behavior be considered an addiction?

    Science.gov (United States)

    Kraus, Shane W; Voon, Valerie; Potenza, Marc N

    2016-12-01

    To review the evidence base for classifying compulsive sexual behavior (CSB) as a non-substance or 'behavioral' addiction. Data from multiple domains (e.g. epidemiological, phenomenological, clinical, biological) are reviewed and considered with respect to data from substance and gambling addictions. Overlapping features exist between CSB and substance use disorders. Common neurotransmitter systems may contribute to CSB and substance use disorders, and recent neuroimaging studies highlight similarities relating to craving and attentional biases. Similar pharmacological and psychotherapeutic treatments may be applicable to CSB and substance addictions, although considerable gaps in knowledge currently exist. Despite the growing body of research linking compulsive sexual behavior (CSB) to substance addictions, significant gaps in understanding continue to complicate classification of CSB as an addiction. © 2016 Society for the Study of Addiction.

  10. Stuy on Fatigue Life of Aluminum Alloy Considering Fretting

    Science.gov (United States)

    Yang, Maosheng; Zhao, Hongqiang; Wang, Yunxiang; Chen, Xiaofei; Fan, Jiali

    2018-01-01

    To study the influence of fretting on Aluminum Alloy, a global finite element model considering fretting was performed using the commercial code ABAQUS. With which a new model for predicting fretting fatigue life has been presented based on friction work. The rationality and effectiveness of the model were validated according to the contrast of experiment life and predicting life. At last influence factor on fretting fatigue life of aerial aluminum alloy was investigated with the model. The results revealed that fretting fatigue life decreased monotonously with the increasing of normal load and then became constant at higher pressures. At low normal load, fretting fatigue life was found to increase with increase in the pad radius. At high normal load, however, the fretting fatigue life remained almost unchanged with changes in the fretting pad radius. The bulk stress amplitude had the dominant effect on fretting fatigue life. The fretting fatigue life diminished as the bulk stress amplitude increased.

  11. A framework for considering externalities in urban water asset management.

    Science.gov (United States)

    Marlow, David; Pearson, Leonie; Macdonald, Darla Hatton; Whitten, Stuart; Burn, Stewart

    2011-01-01

    Urban communities rely on a complex network of infrastructure assets to connect them to water resources. There is considerable capital investment required to maintain, upgrade and extend this infrastructure. As the remit of a water utility is broader than just financial considerations, infrastructure investment decisions must be made in light of environmental and societal issues. One way of facilitating this is to integrate consideration of externalities into decision making processes. This paper considers the concept of externalities from an asset management perspective. A case study is provided to show the practical implications to a water utility and asset managers. A framework for the inclusion of externalities in asset management decision making is also presented. The potential for application of the framework is highlighted through a brief consideration of its key elements.

  12. Force Modelling in Orthogonal Cutting Considering Flank Wear Effect

    Science.gov (United States)

    Rathod, Kanti Bhikhubhai; Lalwani, Devdas I.

    2017-05-01

    In the present work, an attempt has been made to provide a predictive cutting force model during orthogonal cutting by combining two different force models, that is, a force model for a perfectly sharp tool plus considering the effect of edge radius and a force model for a worn tool. The first force model is for a perfectly sharp tool that is based on Oxley's predictive machining theory for orthogonal cutting as the Oxley's model is for perfectly sharp tool, the effect of cutting edge radius (hone radius) is added and improve model is presented. The second force model is based on worn tool (flank wear) that was proposed by Waldorf. Further, the developed combined force model is also used to predict flank wear width using inverse approach. The performance of the developed combined total force model is compared with the previously published results for AISI 1045 and AISI 4142 materials and found reasonably good agreement.

  13. CEZ considering building a power station in Slovakia

    International Nuclear Information System (INIS)

    Janoska, J.

    2004-01-01

    General Manager of Czech concern CEZ, Martin Roman expecting that his company would probably not succeed in tender for Slovenske elektrarne (SE) shares said for BBC that CEZ was considering the possibility of building a thermal power station in Slovakia that would use Polish coal. He made this statement in a time when an approval by the Slovak cabinet was the only missing step to complete the approval process of contractual documentation related to privatization of SE through Italian Enel. The cabinet only discusses the issue on Wednesday as Slovak Minister of Finance raised objections to its contents. Ivan Miklos asked for guarantees that the state would not be responsible for any future risks resulting from long term contracts concluded by SE

  14. Economics of the Nuclear Energy Considered CO2 Emission

    International Nuclear Information System (INIS)

    Kim, Su Jin; Kim, Yong Min

    2011-01-01

    The energy consumption in Korea has greatly increased along with its rapid economic growth and industrialization since the 1970s. Total energy consumption increased at an average annual growth rate. Due to the lack of domestic energy resources, however, the overseas dependence rate of energy consumption has continuously increased. Also Climate change, resulting from increases in greenhouse gas emissions (GHG), is considered one of the biggest environmental dangers facing the world today. The objective and approach of this study are to compare the different types of scenarios in terms of the power plant type and CO 2 emission from each power plant. We estimated cost of electricity generation using fuel cost, O and M cost(Operation and Maintenance Cost) and CO 2 emission

  15. Points to consider for prioritizing clinical genetic testing services

    DEFF Research Database (Denmark)

    Severin, Franziska; Borry, Pascal; Cornel, Martina C

    2015-01-01

    Given the cost constraints of the European health-care systems, criteria are needed to decide which genetic services to fund from the public budgets, if not all can be covered. To ensure that high-priority services are available equitably within and across the European countries, a shared set...... testing services available in the next decade. Ethically and economically reflected prioritization criteria are needed. Prioritization should be based on considerations of medical benefit, health need and costs. Medical benefit includes evidence of benefit in terms of clinical benefit, benefit......, following the principles of accountability for reasonableness. We provide points to consider to stimulate this debate across the EU and to serve as a reference for improving patient management.European Journal of Human Genetics advance online publication, 24 September 2014; doi:10.1038/ejhg.2014.190....

  16. Your organization should consider a cash-balance pension plan.

    Science.gov (United States)

    Godwin, N H; Key, K G

    2000-08-01

    In recent years, a growing number of healthcare organizations have dropped the traditional defined-benefit pension plan and adopted cash-balance pension plans. A cash-balance pension plan generally allows employers to pay less in overall pension benefits and administration costs. A cash-balance pension plan pays benefits according to a predetermined formula based on an average of the employee's annual salary over his or her length of service. This provides recognizable benefits to younger employees but lower overall benefits to employees who have a long length of service. To assuage employees who may feel cheated out of the pension benefits they expected, employers that change to a cash-balance pension plan should consider offering higher guaranteed growth rates, advanced notification of the change to the new plan, and generous early-retirement options for employees with longer lengths of service.

  17. Selection of radioactive waste disposal site considering natural processes

    International Nuclear Information System (INIS)

    Nakamura, H.

    1991-01-01

    To dispose the radioactive waste, it is necessary to consider the transfer of material in natural environment. The points of consideration are 1) Long residence time of water 2) Independence of biosphere from the compartment containing the disposal site in the natural hydrologic cycle 3) Dilution with the natural inactive isotope or the same group of elements. Isotope dilution for 129 I and 14 C can be expected by proper selection of the site. 241 Am and 239 Pu will be homogenized into soil or sediment with insoluble elements such as iron and aluminium. For 237 Np and 99 Tc anionic condition is important for the selection. From the point of view of hydrologic cycle, anoxic dead water zone avoiding beneath mountain area is preferable for the disposal site. (author)

  18. Simulation of Stamping Process of Automotive Panel Considering Die Deformation

    International Nuclear Information System (INIS)

    Keum, Y.T.; Ahn, I.H.; Lee, I.K.; Song, M.H.; Kwon, S.O.; Park, J.S.

    2005-01-01

    In order to see the effect of die deformation on the forming of sheet metals, the draw-ins, strains, and spring-backs of an automotive fender panels are numerically simulated considering the die deformation, which is found by the simultaneous structural analysis of press and dies. By coupling the forming analysis and the structural analysis, the die deformation is simultaneously taken into account in the forming process. Furthermore, for the consideration of load difference transferred among the upper die, punch, and blank holder due to the changes in sheet thickness, the gap elements are employed instead of the blank sheet in the structural analysis. The numerical simulation results of an automotive fender draw panel are compared with the measurements. The comparison of the forming and spring-back analysis results between the rigid die and the deformed die shows that the deformed tool provides more accurate forming and spring-back prediction

  19. Rankine earth pressure theory considering microstructure of porous materials

    Science.gov (United States)

    Li, Junhu; Xue, Wei; Zhang, Chao; Zhang, Wenchao; Xu, Riqing

    2017-11-01

    Soil as an engineering material has very complex properties, such as non-continuous, non-uniformity and nonlinear mechanical. In a certain extent, macroscopic properties of soil are affected by the changes of the microstructure. And microscopic porosity of soft clay and its influencing factors, the relationship between macro and micro porosity, the average contact area rate and its influencing factors are studied. Some mechanics problems were analyzed by using the relationship between macro-porosity and the average contact area rate. Combining soil lateral stress transfer principle, a calculation theory of earth pressure considering soil contact area was got. The possible reason of the differences between earth pressure and the actual monitoring earth pressure was analyzed by the case.

  20. Transmission Network Expansion Planning Considering Phase-Shifter Transformers

    Directory of Open Access Journals (Sweden)

    Celso T. Miasaki

    2012-01-01

    Full Text Available This paper presents a novel mathematical model for the transmission network expansion planning problem. Main idea is to consider phase-shifter (PS transformers as a new element of the transmission system expansion together with other traditional components such as transmission lines and conventional transformers. In this way, PS are added in order to redistribute active power flows in the system and, consequently, to diminish the total investment costs due to new transmission lines. Proposed mathematical model presents the structure of a mixed-integer nonlinear programming (MINLP problem and is based on the standard DC model. In this paper, there is also applied a specialized genetic algorithm aimed at optimizing the allocation of candidate components in the network. Results obtained from computational simulations carried out with IEEE-24 bus system show an outstanding performance of the proposed methodology and model, indicating the technical viability of using these nonconventional devices during the planning process.

  1. Spacecraft Dynamics Should be Considered in Kalman Filter Attitude Estimation

    Science.gov (United States)

    Yang, Yaguang; Zhou, Zhiqiang

    2016-01-01

    Kalman filter based spacecraft attitude estimation has been used in some high-profile missions and has been widely discussed in literature. While some models in spacecraft attitude estimation include spacecraft dynamics, most do not. To our best knowledge, there is no comparison on which model is a better choice. In this paper, we discuss the reasons why spacecraft dynamics should be considered in the Kalman filter based spacecraft attitude estimation problem. We also propose a reduced quaternion spacecraft dynamics model which admits additive noise. Geometry of the reduced quaternion model and the additive noise are discussed. This treatment is more elegant in mathematics and easier in computation. We use some simulation example to verify our claims.

  2. [Re]considering queer theories and science education

    Science.gov (United States)

    Fifield, Steve; Letts, Will

    2014-06-01

    We take Mattias Lundin's Inviting queer ideas into the science classroom: studying sexual education from a queer perspective as a point of departure to explore some enduring issues related to the use of queer theories to interrogate science education and its practices. We consider the uneasy, polygamous relationship between gay and lesbian studies and queer theories; the border surveillance that characterizes so much of science [education]; the alluring call of binaries and binary thinking; the `all' within the catchcry `science for all'; and the need to better engage the fullness of science and the curriculum, in addition to noting silences around diverse sexes, sexualities, and desires. We catalogue some of the challenges that persist in this work, and offer thoughts about how to work with and against them to enact a more just and compelling science education.

  3. Performance Evaluation of LoRa Considering Scenario Conditions.

    Science.gov (United States)

    Sanchez-Iborra, Ramon; Sanchez-Gomez, Jesus; Ballesta-Viñas, Juan; Cano, Maria-Dolores; Skarmeta, Antonio F

    2018-03-03

    New verticals within the Internet of Things (IoT) paradigm such as smart cities, smart farming, or goods monitoring, among many others, are demanding strong requirements to the Radio Access Network (RAN) in terms of coverage, end-node's power consumption, and scalability. The technologies employed so far to provide IoT scenarios with connectivity, e.g., wireless sensor network and cellular technologies, are not able to simultaneously cope with these three requirements. Thus, a novel solution known as Low Power - Wide Area Network (LP-WAN) has emerged as a promising alternative to provide with low-cost and low-power-consumption connectivity to end-nodes spread in a wide area. Concretely, the Long-Range Wide Area Network (LoRaWAN) technology is one of the LP-WAN platforms that is receiving greater attention from both the industry and the academia. For that reason, in this work, a comprehensive performance evaluation of LoRaWAN under different environmental conditions is presented. The results are obtained from three real scenarios, namely, urban, suburban, and rural, considering both dynamic and static conditions, hence a discussion about the most proper LoRaWAN physical-layer configuration for each scenario is provided. Besides, a theoretical coverage study is also conducted by the use of a radio planning tool considering topographic maps and a precise propagation model. From the attained results, it can be concluded that it is necessary to evaluate the propagation conditions of the deployment scenario prior to the system implantation in order to reach a compromise between the robustness of the network and the transmission data-rate.

  4. Performance Evaluation of LoRa Considering Scenario Conditions

    Directory of Open Access Journals (Sweden)

    Ramon Sanchez-Iborra

    2018-03-01

    Full Text Available New verticals within the Internet of Things (IoT paradigm such as smart cities, smart farming, or goods monitoring, among many others, are demanding strong requirements to the Radio Access Network (RAN in terms of coverage, end-node’s power consumption, and scalability. The technologies employed so far to provide IoT scenarios with connectivity, e.g., wireless sensor network and cellular technologies, are not able to simultaneously cope with these three requirements. Thus, a novel solution known as Low Power - Wide Area Network (LP-WAN has emerged as a promising alternative to provide with low-cost and low-power-consumption connectivity to end-nodes spread in a wide area. Concretely, the Long-Range Wide Area Network (LoRaWAN technology is one of the LP-WAN platforms that is receiving greater attention from both the industry and the academia. For that reason, in this work, a comprehensive performance evaluation of LoRaWAN under different environmental conditions is presented. The results are obtained from three real scenarios, namely, urban, suburban, and rural, considering both dynamic and static conditions, hence a discussion about the most proper LoRaWAN physical-layer configuration for each scenario is provided. Besides, a theoretical coverage study is also conducted by the use of a radio planning tool considering topographic maps and a precise propagation model. From the attained results, it can be concluded that it is necessary to evaluate the propagation conditions of the deployment scenario prior to the system implantation in order to reach a compromise between the robustness of the network and the transmission data-rate.

  5. AC power flow importance measures considering multi-element failures

    International Nuclear Information System (INIS)

    Li, Jian; Dueñas-Osorio, Leonardo; Chen, Changkun; Shi, Congling

    2017-01-01

    Quantifying the criticality of individual components of power systems is essential for overall reliability and management. This paper proposes an AC-based power flow element importance measure, while considering multi-element failures. The measure relies on a proposed AC-based cascading failure model, which captures branch overflow, bus load shedding, and branch failures, via AC power flow and optimal power flow analyses. Taking the IEEE 30, 57 and 118-bus power systems as case studies, we find that N-3 analyses are sufficient to measure the importance of a bus or branch. It is observed that for a substation bus, its importance is statistically proportional to its power demand, but this trend is not observed for power plant buses. While comparing with other reliability, functionality, and topology-based importance measures popular today, we find that a DC power flow model, although better correlated with the benchmark AC model as a whole, still fails to locate some critical elements. This is due to the focus of DC-based models on real power that ignores reactive power. The proposed importance measure is aimed to inform decision makers about key components in complex systems, while improving cascading failure prevention, system backup setting, and overall resilience. - Highlights: • We propose a novel importance measure based on joint failures and AC power flow. • A cascading failure model considers both AC power flow and optimal power flow. • We find that N-3 analyses are sufficient to measure the importance of an element. • Power demand impacts the importance of substations but less so that of generators. • DC models fail to identify some key elements, despite correlating with AC models.

  6. Considering childbearing in the age of highly active antiretroviral ...

    African Journals Online (AJOL)

    Objectives: Based on a qualitative study conducted in Bulawayo, Zimbabwe, this article examines how the availability of HAART since April 2004 may impact the views and choices of HIV-positive couples on childbearing. Methods: In-depth interviews were conducted with 15 couples where at least one partner was HIV ...

  7. Optimum transmission system expansion offshore considering renewable energy sources

    NARCIS (Netherlands)

    Torbaghan, Shahab S.; Gibescu, Madeleine

    2017-01-01

    This chapter provides an overview of transmission expansion planning (TEP) methods and their practical application. First, it discusses the strategic importance of the transmission system. Next, it describes the reasons why TEP remains a challenge for systems with a large share of renewable energy.

  8. Topology optimization considering design-dependent Stokes flow loads

    NARCIS (Netherlands)

    Picelli, R.; Vicente, W.M.; Pavanello, R.; van Keulen, A.; Li, Qing; Steven, Grant P.; Zhang, Zhongpu

    2015-01-01

    This article presents an evolutionary topology optimization method for mean compliance minimization of structures under design-dependent viscous fluid flow loads. The structural domain is governed by the elasticity equation and the fluid by the incompressible Stokes flow equations. When the

  9. Methods in aquatic bacteriology

    National Research Council Canada - National Science Library

    Austin, B

    1988-01-01

    .... Within these sections detailed chapters consider sampling methods, determination of biomass, isolation methods, identification, the bacterial microflora of fish, invertebrates, plants and the deep...

  10. An enhanced particle swarm optimization for dynamic economic dispatch problem considering valve-point loading

    Energy Technology Data Exchange (ETDEWEB)

    Sriyanyong, P. [King Mongkut' s Univ. of Technology, Bangkok (Thailand). Dept. of Teacher Training in Electrical Engineering

    2008-07-01

    This paper described the use of an enhanced particle swarm optimization (PSO) model to address the problem of dynamic economic dispatch (DED). A modified heuristic search method was incorporated into the PSO model. Both smooth and non-smooth cost functions were considered. The enhanced PSO model not only utilized the basic PSO algorithm in order to seek the optimal solution for the DED problem, but it also used a modified heuristic method to deal with constraints and increase the possibility of finding a feasible solution. In order to validate the enhanced PSO model, it was used and tested on 10-unit systems considering both smooth and non-smooth cost functions characteristics. The experimental results were also compared to other methods. The proposed technique was found to be better than other approaches. The enhanced PSO model outperformed others with respect to quality, stability and reliability. 23 refs., 1 tab., 8 figs.

  11. Solar array deployment analysis considering path-dependent behavior of a tape spring hinge

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Won; Park, Young Jin [KAIST, Daejeon (Korea, Republic of)

    2015-05-15

    Solar array deployment analysis is conducted considering the path-dependent nonlinear behavior of tape spring hinge. Such hinges offer many advantages over rigid hinges; they are self-deployable, self-locking, lightweight, and simple. However, they show strongly nonlinear behavior with respect to rotation angle, making deployment analysis difficult. To accurately consider the characteristics of tape spring hinges for deployment analysis, a path-dependent path identification (PI) method for tracing the previous path of the moment is introduced. To analyze the deployment motion, the governing equation for solar array deployment is derived within the framework of Kane's dynamic equation for three deployable solar panels. The numerical solution is compared with the Recurdyn's multi-body dynamics analysis solution using experimentally measured moment-rotation profiles. Solar array deployment analysis is conducted by considering and not considering the path-dependent PI method. This simulation example shows that the proposed path-dependent PI method is very effective for accurately predicting the deployment motion.

  12. GRB Duration Distribution Considering the Position of the Fermi

    Directory of Open Access Journals (Sweden)

    D. Szécsi

    2012-01-01

    Full Text Available The Fermi satellite has a particular motion during its flight which enables it to catch the gamma-ray bursts mostly well. The side-effect of this favourable feature is that the lightcurves of the GBM detectors are stressed by rapidly and extremely varying background. Before this data is processed, it needs to be separated from the background. The commonly used methods [3,7] were useless for most cases of Fermi, so we developed a new technique based on the motion and orientation of the satellite. The background-free lightcurve can be used to perform statistical surveys, hence we showed the efficiency of our background-filtering method presenting a statistical analysis known from the literature.

  13. Biofuel supply chain considering depreciation cost of installed plants

    Science.gov (United States)

    Rabbani, Masoud; Ramezankhani, Farshad; Giahi, Ramin; Farshbaf-Geranmayeh, Amir

    2016-06-01

    Due to the depletion of the fossil fuels and major concerns about the security of energy in the future to produce fuels, the importance of utilizing the renewable energies is distinguished. Nowadays there has been a growing interest for biofuels. Thus, this paper reveals a general optimization model which enables the selection of preprocessing centers for the biomass, biofuel plants, and warehouses to store the biofuels. The objective of this model is to maximize the total benefits. Costs of the model consist of setup cost of preprocessing centers, plants and warehouses, transportation costs, production costs, emission cost and the depreciation cost. At first, the deprecation cost of the centers is calculated by means of three methods. The model chooses the best depreciation method in each period by switching between them. A numerical example is presented and solved by CPLEX solver in GAMS software and finally, sensitivity analyses are accomplished.

  14. Available transfer capability calculation considering voltage stability margin

    International Nuclear Information System (INIS)

    Pan, Xiong; Xu, Guoyu

    2005-01-01

    To make the electricity trades carry out successfully, the calculation of available transfer capability (ATC) must coordinate the relationship between the security and economic benefits. In this paper, a model for ATC calculations accorded with trade-off mechanism in electricity market was set up. The impact of branch outage contingency on the static voltage stability margin was analyzed, and contingency ranking was performed through sensitivity indices of branch flows with respect to the loading margin. Optimal power flow based on primal-dual interior point method was applied to obtain ATC when the N-1 security constraints were included. The calculation results of IEEE 30-bus and IEEE 118-bus systems show that the proposed model and method are valid. (author) (N-1 security constraints; Electricity market; Available transfer capability; Optimal power flow; Voltage stability)

  15. Galeata: chronic migraine independently considered in a medieval headache classification

    OpenAIRE

    Guerrero-Peral, Ángel Luís; de Frutos González, Virginia; Pedraza-Hueso, María Isabel

    2014-01-01

    Background Chronic migraine is a quite recent concept. However, there are descriptions suggestive of episodic migraine since the beginning of scientific medicine. We aim to review main headache classifications during Classical antiquity and compared them with that proposed in the 11th century by Constantine the African in his Liber Pantegni, one of the most influential texts in medieval medicine. Method We have carried out a descriptive review of Henricum Petrum's Latin edition, year 1539. Re...

  16. Accurate sizing of supercapacitors storage system considering its capacitance variation.

    OpenAIRE

    Trieste , Sony; Bourguet , Salvy; Olivier , Jean-Christophe; Loron , Luc; Le Claire , Jean-Claude

    2011-01-01

    International audience; This paper highlights the energy errors made for the design of supercapacitors used as a main energy source. First of all, the paper presents the two definitions of capacitance of a capacitance-voltage dependent material. The number of supercapacitors is important for the application purchasing cost. That is why the paper introduces an analytical model and an electrical model along with an identification method for the capacitance variation. This variation is presented...

  17. Automatic Mosaicking of Satellite Imagery Considering the Clouds

    Science.gov (United States)

    Kang, Yifei; Pan, Li; Chen, Qi; Zhang, Tong; Zhang, Shasha; Liu, Zhang

    2016-06-01

    With the rapid development of high resolution remote sensing for earth observation technology, satellite imagery is widely used in the fields of resource investigation, environment protection, and agricultural research. Image mosaicking is an important part of satellite imagery production. However, the existence of clouds leads to lots of disadvantages for automatic image mosaicking, mainly in two aspects: 1) Image blurring may be caused during the process of image dodging, 2) Cloudy areas may be passed through by automatically generated seamlines. To address these problems, an automatic mosaicking method is proposed for cloudy satellite imagery in this paper. Firstly, modified Otsu thresholding and morphological processing are employed to extract cloudy areas and obtain the percentage of cloud cover. Then, cloud detection results are used to optimize the process of dodging and mosaicking. Thus, the mosaic image can be combined with more clear-sky areas instead of cloudy areas. Besides, clear-sky areas will be clear and distortionless. The Chinese GF-1 wide-field-of-view orthoimages are employed as experimental data. The performance of the proposed approach is evaluated in four aspects: the effect of cloud detection, the sharpness of clear-sky areas, the rationality of seamlines and efficiency. The evaluation results demonstrated that the mosaic image obtained by our method has fewer clouds, better internal color consistency and better visual clarity compared with that obtained by traditional method. The time consumed by the proposed method for 17 scenes of GF-1 orthoimages is within 4 hours on a desktop computer. The efficiency can meet the general production requirements for massive satellite imagery.

  18. Digital communication to support clinical supervision: considering the human factors.

    Science.gov (United States)

    Mather, Carey; Marlow, Annette; Cummings, Elizabeth

    2013-01-01

    During the last three years the School of Nursing and Midwifery at the University of Tasmania has used a needs assessment survey to explore the needs of organizations and nursing professionals that facilitate and clinically supervise Bachelor of Nursing students in the workplace. Findings from the survey indicated that staff at healthcare organizations wanted a communication strategy that was easily accessible by clinicians who supervised students during work integrated learning placements. In particular they wanted to receive timely information related to the role and function of supervisors in practice. The development of the digital strategy to strengthen the development of a community of practice between the University, organizations, facilities and clinical supervisors was identified as the key method of improving communication. Blogging and micro blogging were selected as methods of choice for the implementation of the digital strategy because they were easy to set up, use and enable equity of access to geographically dispersed practitioners in urban and rural areas. Change champions were identified to disseminate information about the strategy within their workplaces. Although clinicians indicated electronic communication as their preferred method, there were a number of human factors at a systems and individual level identified to be challenges when communicating with clinical supervisors who were based off-campus. Information communication technology policies and embedded culture towards social presence were impediments to using this approach in some organizations. Additionally, it was found that it is necessary for this group of clinicians to be educated about using digital methods to undertake their role as clinical supervisors in their varied clinical practice environments.

  19. Snow reliability in ski resorts considering artificial snowmaking

    Science.gov (United States)

    Hofstätter, M.; Formayer, H.; Haas, P.

    2009-04-01

    Snow reliability is the key factor to make skiing on slopes possible and to ensure added value in winter tourism. In this context snow reliability is defined by the duration of a snowpack on the ski runs of at least 50 mm snow water equivalent (SWE), within the main season (Dec-Mar). Furthermore the snowpack should form every winter and be existent early enough in season. In our work we investigate the snow reliability of six Austrian ski resorts. Because nearly all Austrian resorts rely on artificial snowmaking it is of big importance to consider man made snow in the snowpack accumulation and ablation in addition to natural snow. For each study region observed weather data including temperature, precipitation and snow height are used. In addition we differentiate up to three elevations on each site (valley, intermediate, mountain top), being aware of the typical local winter inversion height. Time periods suitable for artificial snow production, for several temperature threshold (-6,-4 or -1 degree Celsius) are calculated on an hourly base. Depending on the actual snowpack height, man made snow can be added in the model with different defined capacities, considering different technologies or the usage of additives. To simulate natural snowpack accumulation and ablation we a simple snow model, based on daily precipitation and temperature. This snow model is optimized at each site separately through certain parameterization factors. Based on the local observations and the monthly climate change signals from the climate model REMO-UBA, we generate long term time series of temperature and precipitation, using the weather generator LARS. Thereby we are not only able to simulate the snow reliability under current, but also under future climate conditions. Our results show significant changes in snow reliability, like an increase of days with insufficient snow heights, especially at mid and low altitudes under natural snow conditions. Artificial snowmaking can partly

  20. A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

    DEFF Research Database (Denmark)

    Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

    2017-01-01

    In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carried...... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated...

  1. A Constitutive Relationship for Gravelly Soil Considering Fine Particle Suffusion.

    Science.gov (United States)

    Zhang, Yuning; Chen, Yulong

    2017-10-23

    Suffusion erosion may occur in sandy gravel dam foundations that use suspended cutoff walls. This erosion causes a loss of fine particles, degrades the soil strength and deformation moduli, and adversely impacts the cutoff walls of the dam foundation, as well as the overlying dam body. A comprehensive evaluation of these effects requires models that quantitatively describe the effects of fine particle losses on the stress-strain relationships of sandy gravels. In this work, we propose an experimental scheme for studying these types of models, and then perform triaxial and confined compression tests to determine the effects of particle losses on the stress-strain relationships. Considering the Duncan-Chang E-B model, quantitative expressions describing the relationship between the parameters of the model and the particle losses were derived. The results show that particle losses did not alter the qualitative stress-strain characteristics of the soils; however, the soil strength and deformation moduli were degraded. By establishing the relationship between the parameters of the model and the losses, the same model can then be used to describe the relationship between sandy gravels and erosion levels that vary in both time and space.

  2. A Constitutive Relationship for Gravelly Soil Considering Fine Particle Suffusion

    Directory of Open Access Journals (Sweden)

    Yuning Zhang

    2017-10-01

    Full Text Available Suffusion erosion may occur in sandy gravel dam foundations that use suspended cutoff walls. This erosion causes a loss of fine particles, degrades the soil strength and deformation moduli, and adversely impacts the cutoff walls of the dam foundation, as well as the overlying dam body. A comprehensive evaluation of these effects requires models that quantitatively describe the effects of fine particle losses on the stress-strain relationships of sandy gravels. In this work, we propose an experimental scheme for studying these types of models, and then perform triaxial and confined compression tests to determine the effects of particle losses on the stress-strain relationships. Considering the Duncan-Chang E-B model, quantitative expressions describing the relationship between the parameters of the model and the particle losses were derived. The results show that particle losses did not alter the qualitative stress-strain characteristics of the soils; however, the soil strength and deformation moduli were degraded. By establishing the relationship between the parameters of the model and the losses, the same model can then be used to describe the relationship between sandy gravels and erosion levels that vary in both time and space.

  3. Improving large-scale groundwater models by considering fossil gradients

    Science.gov (United States)

    Schulz, Stephan; Walther, Marc; Michelsen, Nils; Rausch, Randolf; Dirks, Heiko; Al-Saud, Mohammed; Merz, Ralf; Kolditz, Olaf; Schüth, Christoph

    2017-05-01

    Due to limited availability of surface water, many arid to semi-arid countries rely on their groundwater resources. Despite the quasi-absence of present day replenishment, some of these groundwater bodies contain large amounts of water, which was recharged during pluvial periods of the Late Pleistocene to Early Holocene. These mostly fossil, non-renewable resources require different management schemes compared to those which are usually applied in renewable systems. Fossil groundwater is a finite resource and its withdrawal implies mining of aquifer storage reserves. Although they receive almost no recharge, some of them show notable hydraulic gradients and a flow towards their discharge areas, even without pumping. As a result, these systems have more discharge than recharge and hence are not in steady state, which makes their modelling, in particular the calibration, very challenging. In this study, we introduce a new calibration approach, composed of four steps: (i) estimating the fossil discharge component, (ii) determining the origin of fossil discharge, (iii) fitting the hydraulic conductivity with a pseudo steady-state model, and (iv) fitting the storage capacity with a transient model by reconstructing head drawdown induced by pumping activities. Finally, we test the relevance of our approach and evaluated the effect of considering or ignoring fossil gradients on aquifer parameterization for the Upper Mega Aquifer (UMA) on the Arabian Peninsula.

  4. Chest Pain: The Need to Consider Less Frequent Diagnosis

    Directory of Open Access Journals (Sweden)

    Pedro Magalhães

    2016-01-01

    Full Text Available Chest pain is one of the most frequent patient’s complaints. The commonest underlying causes are well known, but, sometimes, in some clinical scenarios, it is necessary to consider other diagnoses. We report a case of a 68-year-old Caucasian male, chronically hypertensive, who complained of recurrent episodes of chest pain and fever with elevated acute phase reactants. The first investigation was negative for some of the most likely diagnosis and he quickly improved with anti-inflammatory drugs. Over a few months, his symptoms continued to recur periodically, his hypertension was aggravated, and he developed headaches and lower limbs claudication. After a temporal artery biopsy that was negative for vasculitis, he underwent a positron emission tomography suggestive of Takayasu Arteritis. Takayasu Arteritis is a rare chronic granulomatous vasculitis of the aorta and its first-order branches affecting mostly females up to 50 years old. Chest pain is experienced by >40% of the patients and results from the inflammation of the aorta, pulmonary artery, or coronaries.

  5. Wellbore stability in shales considering chemo-poroelastic effects

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Ewerton M.P.; Pastor, Jorge A.S.C.; Fontoura, Sergio A.B.; Rabe, Claudio [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. de Engenharia Civil. Grupo de Tecnologia e Engenharia de Petroleo

    2004-07-01

    Under compaction and low geothermal gradients are deep water characteristics. Both under compaction and low geothermal gradients generate considerable thickness of smectite-rich shales. These rocks are the major source of wellbore stability problems, because they are susceptible to adverse physico-chemical reactions when in contact with inadequate drilling fluids. Due shales are low permeability rocks diffusion processes dominate the changes of pore pressure around wellbore. Diffusion of fluids, ions and temperature occurs in shales during drilling and demand a fully coupled modelling taking account these factors. Despite temperature importance, in this paper wellbore stability in shales is analyzed through a model that considers only the coupling between poroelastic and physico-chemical effects. The coupled equations are solved analytically and have been implemented in a computational simulator with user-friendly interface. Time-dependent simulations of wellbore stability in shales are presented for a typical deep water scenario. The results show that physico-chemical effects change pore pressure around wellbore and have high impact on the wellbore stability. (author)

  6. Stress Analysis of Single Spacer Grid Support considering Fuel Rod

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Y. G.; Jung, D. H.; Kim, J. H. [Chungnam National University, Daejeon (Korea, Republic of); Park, J. K.; Jeon, K. L. [Korea Nuclear Fuel, Daejeon (Korea, Republic of)

    2010-10-15

    Pressurized water reactor (PWR) nuclear fuel assembly is mainly composed of a top-end piece, a bottom-end piece, lots of fuel rods, and several spacer grids. Among them, the main function of spacer grid is protecting fuel rods from Fluid Induced Vibration (FIV). The cross section of spacer grid assembled by laser welding in upper and lower point. When the fuel rod inserted in spacer gird, spring and dimple and around of welded area got a stresses. The main hypothesis of this analysis is the boundary area of HAZ and base metal can get a lot of damage than other area by FIV. So, design factors of spacer grid mainly considered to preventing the fatigue failure in HAZ and spring and dimple of spacer grid. From previous researching, the environment in reactor verified. Pressure and temperature of light water observed 15MPa and 320 .deg. C, and vibration of the fuel rod observed within 0 {approx} 50Hz. In this study, mechanical properties of zirconium alloy that extracted from the test and the spacer grid model which used in the PWR were applied in stress analyzing. General-purpose finite element analysis program was used ANSYS Workbench 12.0.1 version. 3-D CAD program CATIA was used to create spacer grid model

  7. Nonlinear Dynamics of Silicon Nanowire Resonator Considering Nonlocal Effect.

    Science.gov (United States)

    Jin, Leisheng; Li, Lijie

    2017-12-01

    In this work, nonlinear dynamics of silicon nanowire resonator considering nonlocal effect has been investigated. For the first time, dynamical parameters (e.g., resonant frequency, Duffing coefficient, and the damping ratio) that directly influence the nonlinear dynamics of the nanostructure have been derived. Subsequently, by calculating their response with the varied nonlocal coefficient, it is unveiled that the nonlocal effect makes more obvious impacts at the starting range (from zero to a small value), while the impact of nonlocal effect becomes weaker when the nonlocal term reaches to a certain threshold value. Furthermore, to characterize the role played by nonlocal effect in exerting influence on nonlinear behaviors such as bifurcation and chaos (typical phenomena in nonlinear dynamics of nanoscale devices), we have calculated the Lyapunov exponents and bifurcation diagram with and without nonlocal effect, and results shows the nonlocal effect causes the most significant effect as the device is at resonance. This work advances the development of nanowire resonators that are working beyond linear regime.

  8. Points to consider-Raynaud's phenomenon in systemic sclerosis.

    Science.gov (United States)

    Cutolo, Maurizio; Smith, Vanessa; Furst, Daniel E; Khanna, Dinesh; Herrick, Ariane L

    2017-09-01

    RP is an exaggerated vasospastic response to cold or emotion. Randomized, double-blind, placebo-controlled trials with either parallel group or cross-over trials should be mainly considered. Cross-over design, which is good for early phase trials of immediate or very short-term outcomes, is important in a condition as heterogeneous as RP: a wash-out period between treatment arms should always be included to minimize the possibility of a period (carry-over) effect. Duration of RP trials is usually constrained by the need to complete these over a single season, usually winter when the weather is colder. For cross-over trials, each treatment arm tends to be 4 weeks or less. Frequency and duration of attacks, and the Raynaud's Condition Score are widely used outcome measures. There is increasing interest in physiological laboratory endpoints, for example laser Doppler imaging at least for early phase trials. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Optimum profit model considering production, quality and sale problem

    Science.gov (United States)

    Chen, Chung-Ho; Lu, Chih-Lun

    2011-12-01

    Chen and Liu ['Procurement Strategies in the Presence of the Spot Market-an Analytical Framework', Production Planning and Control, 18, 297-309] presented the optimum profit model between the producers and the purchasers for the supply chain system with a pure procurement policy. However, their model with a simple manufacturing cost did not consider the used cost of the customer. In this study, the modified Chen and Liu's model will be addressed for determining the optimum product and process parameters. The authors propose a modified Chen and Liu's model under the two-stage screening procedure. The surrogate variable having a high correlation with the measurable quality characteristic will be directly measured in the first stage. The measurable quality characteristic will be directly measured in the second stage when the product decision cannot be determined in the first stage. The used cost of the customer will be measured by adopting Taguchi's quadratic quality loss function. The optimum purchaser's order quantity, the producer's product price and the process quality level will be jointly determined by maximising the expected profit between them.

  10. Ethical questions must be considered for electronic health records.

    Science.gov (United States)

    Spriggs, Merle; Arnold, Michael V; Pearce, Christopher M; Fry, Craig

    2012-09-01

    National electronic health record initiatives are in progress in many countries around the world but the debate about the ethical issues and how they are to be addressed remains overshadowed by other issues. The discourse to which all others are answerable is a technical discourse, even where matters of privacy and consent are concerned. Yet a focus on technical issues and a failure to think about ethics are cited as factors in the failure of the UK health record system. In this paper, while the prime concern is the Australian Personally Controlled Electronic Health Record (PCEHR), the discussion is relevant to and informed by the international context. The authors draw attention to ethical and conceptual issues that have implications for the success or failure of electronic health records systems. Important ethical issues to consider as Australia moves towards a PCEHR system include: issues of equity that arise in the context of personal control, who benefits and who should pay, what are the legitimate uses of PCEHRs, and how we should implement privacy. The authors identify specific questions that need addressing.

  11. Acute neurological symptoms during hypobaric exposure: consider cerebral air embolism.

    Science.gov (United States)

    Weenink, Robert P; Hollmann, Markus W; van Hulst, Robert A

    2012-11-01

    Cerebral arterial gas embolism (CAGE) is well known as a complication of invasive medical procedures and as a risk in diving and submarine escape. In the underwater environment, CAGE is caused by trapped air, which expands and leads to lung vessel rupture when ambient pressure decreases during ascent. Pressure decrease also occurs during hypobaric activities such as flying and, therefore, CAGE may theoretically be a risk in hypobaric exposure. We reviewed the available literature on this subject. Identified were 12 cases of CAGE due to hypobaric exposure. Based on these cases, we discuss pathophysiology, diagnosis, and treatment of CAGE due to hypobaric exposure. The low and slow pressure decrease during most hypobaric activities (as opposed to diving) account for the low incidence of CAGE during these exposures and suggest that severe air trapping must be present to cause barotrauma. This is also suggested by the large prevalence of air filled cysts in the case reports reviewed. We recommend considering CAGE in all patients presenting with acute central neurological injury during or shortly after pressure decrease such as flying. A CT scan of head and chest should be performed in these patients. Treatment with hyperbaric oxygen therapy should be initiated as soon as possible in cases of proven or probable CAGE.

  12. Thinking the "unthinkable": why Philip Morris considered quitting.

    Science.gov (United States)

    Smith, E A; Malone, R E

    2003-06-01

    To investigate the genesis and development of tobacco company Philip Morris's recent image enhancement strategies and analyse their significance. Internal Philip Morris documents, made available by the terms of the Master Settlement Agreement between the tobacco companies and the attorneys general of 46 states, and secondary newspaper sources. Searches of the Philip Morris documents website (www.pmdocs.com) beginning with terms such as "image management" and "identity" and expanding as relevant new terms (consultant names, project names, and dates), were identified, using a "snowball" sampling strategy. In the early 1990s, Philip Morris, faced with increasing pressures generated both externally, from the non-smokers' rights and public health communities, and internally, from the conflicts among its varied operating companies, seriously considered leaving the tobacco business. Discussions of this option, which occurred at the highest levels of management, focused on the changing social climate regarding tobacco and smoking that the tobacco control movement had effected. However, this option was rejected in favour of the image enhancement strategy that culminated with the recent "Altria" name change. This analysis suggests that advocacy efforts have the potential to significantly denormalise tobacco as a corporate enterprise.

  13. A thermo-elastic model for soft rocks considering structure

    International Nuclear Information System (INIS)

    He, Z.; Zhang, S.; Teng, J.; Xiong, Y.

    2017-01-01

    In the fields of nuclear waste geological deposit, geothermal energy and deep mining, the effects of temperature on the mechanical behaviors of soft rocks cannot be neglected. Experimental data in the literature also showed that the structure of soft rocks cannot be ignored. Based on the super-loading yield surface and the concept of temperature-deduced equivalent stress, a thermo-elastoplastic model for soft rocks is proposed considering the structure. Compared to the super-loading yield surface, only one parameter is added, i.e. the linear thermal expansion coefficient. The predicted results and the comparisons with experimental data in the literature show that the proposed model is capable of simultaneously describing heat increase and heat decrease of soft rocks. A stronger initial structure leads to a greater strength of the soft rocks. Heat increase and heat decrease can be converted between each other due to the change of the initial structure of soft rocks. Furthermore, regardless of the heat increase or heat decrease, a larger linear thermal expansion coefficient or a greater temperature always leads to a much rapider degradation of the structure. The degradation trend will be more obvious for the coupled greater values of linear thermal expansion coefficient and temperature. Lastly, compared to heat decrease, the structure will degrade more easily in the case of heat increase. (authors)

  14. A thermo-elastoplastic model for soft rocks considering structure

    Science.gov (United States)

    He, Zuoyue; Zhang, Sheng; Teng, Jidong; Xiong, Yonglin

    2017-11-01

    In the fields of nuclear waste geological deposit, geothermy and deep mining, the effects of temperature on the mechanical behaviors of soft rocks cannot be neglected. Experimental data in the literature also showed that the structure of soft rocks cannot be ignored. Based on the superloading yield surface and the concept of temperature-deduced equivalent stress, a thermo-elastoplastic model for soft rocks is proposed considering the structure. Compared to the superloading yield surface, only one parameter is added, i.e. the linear thermal expansion coefficient. The predicted results and the comparisons with experimental data in the literature show that the proposed model is capable of simultaneously describing heat increase and heat decrease of soft rocks. A stronger initial structure leads to a greater strength of the soft rocks. Heat increase and heat decrease can be converted between each other due to the change of the initial structure of soft rocks. Furthermore, regardless of the heat increase or heat decrease, a larger linear thermal expansion coefficient or a greater temperature always leads to a much rapider degradation of the structure. The degradation trend will be more obvious for the coupled greater values of linear thermal expansion coefficient and temperature. Lastly, compared to heat decrease, the structure will degrade more easily in the case of heat increase.

  15. New preemptive scheduling for OBS networks considering cascaded wavelength conversion

    Science.gov (United States)

    Gao, Xingbo; Bassiouni, Mostafa A.; Li, Guifang

    2009-05-01

    In this paper we introduce a new preemptive scheduling technique for next generation optical burst-switched networks considering the impact of cascaded wavelength conversions. It has been shown that when optical bursts are transmitted all optically from source to destination, each wavelength conversion performed along the lightpath may cause certain signal-to-noise deterioration. If the distortion of the signal quality becomes significant enough, the receiver would not be able to recover the original data. Accordingly, subject to this practical impediment, we improve a recently proposed fair channel scheduling algorithm to deal with the fairness problem and aim at burst loss reduction simultaneously in optical burst switching. In our scheme, the dynamic priority associated with each burst is based on a constraint threshold and the number of already conducted wavelength conversions among other factors for this burst. When contention occurs, a new arriving superior burst may preempt another scheduled one according to their priorities. Extensive simulation results have shown that the proposed scheme further improves fairness and achieves burst loss reduction as well.

  16. Security assessment in harbours: parameters to be considered

    Energy Technology Data Exchange (ETDEWEB)

    Romero Faz, D.; Camarero Orive, A.

    2016-07-01

    The ports are the main node in the supply chain and freight transportation. The terrorist attacks of September 11, 2001 marked a turning point in global security. Following this event, and from then on, there is a widespread fear of an attack on commercial ports. The development of the International Ship and Port Facility Security (ISPS) Code of the International Maritime Organization (IMO), and the implementation of the measures derived from it, have significantly improved security at port facilities. However, the experience in recent decades indicates the need for adjustments in the security assessment, in order to improve risk assessment, which is sometimes either underestimated or overestimated. As a first result of the investigation, new parameters for assessing security are proposed considering new aspects on the basis of an analysis of the main methodologies specific to port facilities, the analysis of surveys of the responsible managers for the security of the Spanish port system, and the analysis of the security statistics obtained through security forces. (Author)

  17. States consider suit if DOE refuses spent fuel

    International Nuclear Information System (INIS)

    Zeyher, A.

    1994-01-01

    Michigan, Florida, and Minnesota were joined by Wisconsin on April 21 in the Nuclear Waste Strategy Coalition (NWSC), a group of utilities, state regulators, and state attorneys general that have banded together to decide what to do about the Department of Energy's apparent intention to renege on its obligation to begin taking title to spent nuclear fuel by January 31, 1998. According to Ronald Russell, a commissioner on the Michigan Public Service Commission and cofounder of the NWSC, another six states have expressed interest in joining the coalition. open-quotes We're looking at encouraging the DOE to step up to its legal responsibility to take nuclear spent fuel by 1998,close quotes Russell said. The objectives of the coalition include asking the DOE to support privatization of nuclear storage, to review the management of the final repository program in order to make it more efficient, and to identify legislative changes that the DOE might feel are necessary for it to accomplish its charge. The NWSC is also considering filing a lawsuit in response to the DOE's open-quotes anticipatory breach of an executory contract.close quotes The NWSC and others feel that the Nuclear Waste Policy Act of 1982 and the related standard contracts between the DOE and the utilities form a legal contract for the DOE to take the spent fuel on the agreed upon date

  18. APF-Based Car Following Behavior Considering Lateral Distance

    Directory of Open Access Journals (Sweden)

    Zhao-Sheng Yang

    2013-01-01

    Full Text Available Considering the influence of lateral distance on consecutive vehicles, this paper proposes a new car following model based on the artificial potential field theory (APF. Traditional car following behaviors all assume that the vehicles are driving along the middle of a lane. Different from the traditional car following principles, this incorporation of APF offers a potential breakthrough in the fields of car following theory. The individual vehicle can be represented as a unit point charge in electric field, and the interaction of the attractive potential energy and the repellent potential energy between vehicles simplifies the various influence factors on the target vehicle in actual following behavior. Consequently, it can make a better analysis of the following behavior under the lateral separation. Then, the proposed model has been demonstrated in simulation environment, through which the space-time trajectories and the potential energy change regulation are obtained. Simulations verify that the following vehicle's behavior is vulnerable to be affected by lateral distance, where the attractive potential energy tends to become repellent potential energy as the longitudinal distance decreases. The search results prove that the proposed model quantifies the relations between headway and potential energy and better reflects the following process in real-world situation.

  19. Enhanced regional forecasting considering single wind farm distribution for upscaling

    International Nuclear Information System (INIS)

    Bremen, Lueder von; Saleck, Nadja; Heinemann, Detlev

    2007-01-01

    With increasing wind power penetration the need for more accurate wind power forecasts increases to raise the market value of wind power. State-of-the-art wind power forecasting tools are considered either statistical or physical. Fundamentally new techniques are rare, thus it is tried to establish a new approach. The spatial decomposition of wind power generation in Germany can be done with principle component analysis to extract the main pattern of variability. They have a physical meaning when linked with typical weather situation. The first four eigenvectors explain about 94 % of the observed variance. The time-evolving principle components are linked with the total wind power feed-in in Germany and are used for its estimation. A new wind power forecasting model has been implemented with this approach and shows very good results that are comparable with state-of-the-art commercial wind power forecast models. The day-ahead forecast error for a common intercomparison period Jan-Jul 2006 is 4.4 %. The suggested approach offers wide ranges for future developments (e.g. several NWP models), because it is computationally very cheap to run

  20. Considering opinions of the citizens in waste matters

    International Nuclear Information System (INIS)

    Litmanen, T.

    1996-01-01

    Besides the technical questions, the disposal of spent nuclear fuel involves various social, ethical and political aspects. Especially people who live in the vicinity of the locations projected as disposal sites need to consider these issues. Laymen and technical specialists often have different views about the disposal of waste. A confidence gap is said to exist between laymen and experts. To cross the confidence gap, experts must take as active interest in the views expressed by local people. People are particularly apprehensive about the effects of a nuclear waste facility on everyday life in the municipality concerned. Some residents suspect that the disposal project will label the locality as a waste dump. Others think that development of the municipality will stagnate because of fear. Supporters of the disposal facility may argue, for instance, that the project would lead to new jobs and increase tax revenue. When making a decision about the disposal project, the community is at a crossroads where a direction must be chosen. The choice is made difficult by the complexity of the issues under discussion. (orig.) (2 figs.)

  1. Power Consumption Evaluation of Distributed Computing Network Considering Traffic Locality

    Science.gov (United States)

    Ogawa, Yukio; Hasegawa, Go; Murata, Masayuki

    When computing resources are consolidated in a few huge data centers, a massive amount of data is transferred to each data center over a wide area network (WAN). This results in increased power consumption in the WAN. A distributed computing network (DCN), such as a content delivery network, can reduce the traffic from/to the data center, thereby decreasing the power consumed in the WAN. In this paper, we focus on the energy-saving aspect of the DCN and evaluate its effectiveness, especially considering traffic locality, i.e., the amount of traffic related to the geographical vicinity. We first formulate the problem of optimizing the DCN power consumption and describe the DCN in detail. Then, numerical evaluations show that, when there is strong traffic locality and the router has ideal energy proportionality, the system's power consumption is reduced to about 50% of the power consumed in the case where a DCN is not used; moreover, this advantage becomes even larger (up to about 30%) when the data center is located farthest from the center of the network topology.

  2. Public perspectives on biospecimen procurement: what biorepositories should consider.

    Science.gov (United States)

    L'Heureux, Jamie; Murray, Jeffrey C; Newbury, Elizabeth; Shinkunas, Laura; Simon, Christian M

    2013-06-01

    Human biospecimens are central to biobanking efforts, yet how members of the public think about biobank procurement strategies is not well understood. This study aimed to explore public perspectives toward the procurement of residual clinical material versus "direct" procurement strategies such as the drawing of blood. Members of the public residing in and beyond the biobank catchment area of the University of Iowa Hospitals and Clinics were randomly selected to participate in focus groups and a telephone survey. The majority of survey participants (75%, n=559) found both residual and direct procurement strategies equally workable. Small proportions preferred either residual (15%; n=117) or direct (5%; n=40) procurement. Focus group participants (n=48) could identify benefits to both procurement strategies, but raised concerns about possible donor inconvenience/discomfort and reduced biospecimen accrual in the case of direct procurement. Residual procurement raised concerns about lower-quality samples being procured without full donor awareness. Biobanks should consider that members of the public in their research programs may be willing to make specimen donations regardless of whether a residual or direct procurement strategy is employed. Limiting patient discomfort and inconvenience may make direct procurement strategies more acceptable to some members of the public. Ensuring donor awareness through effective informed consent may allay public concerns about the indirectness of donating clinical biospecimens.

  3. Global health care leadership development: trends to consider

    Directory of Open Access Journals (Sweden)

    MacPhee M

    2013-06-01

    Full Text Available Maura MacPhee,1 Lilu Chang,2 Diana Lee,3 Wilza Spiri4 1University of British Columbia School of Nursing, Vancouver, British Columbia, Canada; 2Center for Advancement of Nursing Education, Koo Foundation, Sun Yat-Sen Cancer Center, Taipei, Taiwan; 3Nethersole School of Nursing, Chinese University of Hong Kong, Hong Kong, 4São Paulo State University, Botucatu, São Paulo, Brazil Abstract: This paper provides an overview of trends associated with global health care leadership development. Accompanying these trends are propositions based on current available evidence. These testable propositions should be considered when designing, implementing, and evaluating global health care leadership development models and programs. One particular leadership development model, a multilevel identity model, is presented as a potential model to use for leadership development. Other, complementary approaches, such as positive psychology and empowerment strategies, are discussed in relation to leadership identity formation. Specific issues related to global leadership are reviewed, including cultural intelligence and global mindset. An example is given of a nurse leadership development model that has been empirically tested in Canada. Through formal practice–academic–community collaborations, this model has been locally adapted and is being used for nurse leader training in Hong Kong, Taiwan, and Brazil. Collaborative work is under way to adapt the model for interprofessional health care leadership development. Keywords: health care leadership, development models, global trends, collective

  4. Channel Coordination in Logistics Service Supply Chain considering Fairness

    Directory of Open Access Journals (Sweden)

    Ningning Wang

    2016-01-01

    Full Text Available Logistics service supply chain (LSSC is a new type of service supply chain. This paper investigates the channel coordination issue in a two-echelon LSSC composed of one logistics service integrator (LSI and one functional logistics service provider (FLSP under fairness concerns. The models for a reservation price-only contract under disadvantageous inequality and advantageous inequality are established, respectively, in which the procurement cost, the potential shortage cost, and the operation cost are considered under stochastic market demand. Based on this model, the LSI’s optimal reservation quantity can be determined. Furthermore, we analyze the impact of fairness concerns and the related costs on channel performance and channel coordination. The results are presented in four aspects: (1 channel coordination of the LSSC can be achieved under certain conditions when the LSI experiences advantageous inequality; (2 the spiteful behavior of the LSI leads to the reduction of the channel profit, and channel coordination cannot be achieved when the LSI suffers from disadvantageous inequality; (3 the LSI’s reservation quantity and the channel profit are affected by the LSI’s fairness concerns; (4 motivated by the concerns of fairness, the LSI’s reservation quantity is related not only to his procurement cost and shortage cost but also to the FLSP’s operation cost.

  5. Development of radioactivity estimation system considering radioactive nuclide movement

    International Nuclear Information System (INIS)

    Fukumura, Nobuo; Miyamoto, Yoshiaki

    2010-01-01

    A radioactivity estimation system considering radioactive nuclide movement is developed to integrate the established codes and the code system for decommissioning of sodium cooled fast reactor (FBR). The former are the codes for estimation of radioactivity movement in sodium coolant of fast reactor which are named SAFFIRE, PSYCHE and TTT. The latter code system is to estimate neutron irradiation activity (COSMARD-RRADO). It is paid special attention to keep the consistency of input data used among these codes and also the simplification of their interface. A new function is added to the estimation system, to estimate minor FP inventory caused by the fission of impurities contained in the coolant and slight fuel material attached on the fuel cladding. To check the evaluation system, the system is applied with radioactivity data of the preceding FBR such as BN-350, JOYO and Monju. Agreement between the analysis results and the measurement is well satisfactory. The uncertainty of the code system is within several tens per cent for the activation of primary coolant (Na-22) and factor of 2-4 for the estimation of radioactivity inventory in sodium coolant. (author)

  6. FACTORS TO CONSIDER ABOUT MILK PRODUCTION ON PASTURE

    Directory of Open Access Journals (Sweden)

    Haroldo Wilson da Silva

    2011-12-01

    Full Text Available In this review, we addressed issues that permeate discussions related to some factors to consider about milk production on pasture, since the viability of milk production on pasture until the nutritional value of pasture for dairy cows. Analyze the theme of milk production on pasture and how it is inserted within the perspective of the viability of exploiting the cattle dairy pastures in Brazil is the objective of this work. In general, it was observed that the responses of production with grazing animals are conditioned on the rational use of pasture, so this factor of production represents an economical feed source for livestock destined for milk production. For that, it is evident the need to use land intensively, in order to obtain forage quantity and quality necessary to fully meet the nutritional needs of cows, lactating or not. It was observed in this study the great demand for information on pasture as a resource for the production of milk, which justifies this work. It was concluded that grazing managed properly represent a viable, low cost, animal nutrition in the production of bovine milk.

  7. Design of Brand Names of Medicines Considering Subjects' Preferences.

    Science.gov (United States)

    Pires, Carla Maria Batista Ferreira; Cavaco, Afonso

    2018-03-01

    Only recently, regulations on the names of medicines were developed. Regulations are mainly focused on avoiding the approval of medicine names that may be confusing to others. Furthermore, legal requirements do not include testing for human factors, such as potential users' preferences. To develop a set of new brand names of medicines, to determine subjects' preferred names, and to evaluate if the linguistic features of these names were related to subjects' preferences. Forty-six new names linguistically equivalent to the Portuguese brand names of medicines were developed. A panel of 13 postgraduates on linguistic studies were purposively enrolled. Participants were required to select and categorize the 6 most preferred names. From the 29 selected names: 62.1% ended in consonants, 65.5% contained at least one syllable of the CVC type, and 62.1% presented final stress. Considering these 3 linguistic features, there were statistically significant differences between the preferred and underpreferred names: χ 2 = 4.572, P = .032; χ 2 = 5.599, P = .018; and χ 2 = 4.572; P = .032, respectively. Some linguistic features of the evaluated names were related to subjects' preferences. Tests on subjects' preferences about the names of medicines may provide additional safety features addressed by the present regulations.

  8. Considering ethical dilemmas related to brain death in newborns

    Directory of Open Access Journals (Sweden)

    Ilias Chatziioannidis

    2014-01-01

    Full Text Available Brain death (BD, as the irreversible and permanent loss of cerebral and brainstem function, is relatively uncommon among newborns who need life support. It is considered the result of an acute and irreversible central nervous system insult. Asphyxia, severe intracranial hemorrhage and infection are the most common causes of  BD in children. BD diagnosis is usually based on clinical criteria. Dilemmas about life prolonging treatment for severely compromised infants – as brain dead infants are – has become challenging since neonatal intensive care unit (NICU care has developed, quality of life and resource issues are nowadays continuously underlined. Caring for premature babies is expensive and costs have risen especially since an increased number of infants with handicaps survives. Intensivists’ main duty is first to save lives and then to interrupt treatment in certain conditions like detrimental brain damage. The objective of this article is to present ethical decisions regarding brain dead newborns in order to balance between organ donation necessities and withholding/withdrawing treatment, with respect to the important role of infants’ parents in the process.

  9. Shifting orders among suppliers considering risk, price and transportation cost

    Science.gov (United States)

    Revitasari, C.; Pujawan, I. N.

    2018-04-01

    Supplier order allocation is an important supply chain decision for an enterprise. It is related to the supplier’s function as a raw material provider and other supporting materials that will be used in production process. Most of works on order allocation has been based on costs and other supply chain performance, but very limited of them taking risks into consideration. In this paper we address the problem of order allocation of a single commodity sourced from multiple suppliers considering supply risks in addition to the attempt of minimizing transportation costs. The supply chain risk was investigated and a procedure was proposed in the risk mitigation phase as a form of risk profile. The objective including risk profile in order allocation is to maximize the product flow from a risky supplier to a relatively less risky supplier. The proposed procedure is applied to a sugar company. The result suggests that order allocations should be maximized to suppliers that have a relatively low risk and minimized to suppliers that have a relatively larger risks.

  10. Dynamic droop scheme considering effect of intermittent renewable energy source

    DEFF Research Database (Denmark)

    Wang, Yanbo; Chen, Zhe; Deng, Fujin

    2016-01-01

    This paper presents a dynamic droop control scheme for islanded microgrids dominated by intermittent renewable energy sources, which is able to perform desirable power sharing in the presence of renewable energy source fluctuation. First, allowable maximum power points of wind generator and PV...... flexibility and effectiveness in the presence of the renewable energy sources fluctuation....... controller of each DG unit is activated through local logic variable inferred by wind speed and solar insolation information. Simulation results are given for validating the droop control scheme. The proposed dynamic droop scheme preserves the advantage of conventional droop control method, and provides...

  11. Optimizing wind farm cable routing considering power losses

    DEFF Research Database (Denmark)

    Fischetti, Martina; Pisinger, David

    2017-01-01

    that must be spent immediately in cable and installation costs, and the future reduced revenues due to power losses. The latter goal has not been addressed in previous work. We present a Mixed-Integer Linear Programming approach to optimize the routing using both exact and math-heuristic methods....... In the power losses computation, wind scenarios are handled eciently as part of the preprocessing, resulting in a MIP model of only slightly larger size. A library of real-life instances is introduced and made publicly available for benchmarking. Computational results on this testbed show the viability of our...

  12. Neutron emissivity profile camera diagnostics considering present and future tokamaks

    International Nuclear Information System (INIS)

    Forsberg, S.

    2001-12-01

    This thesis describes the neutron profile camera situated at JET. The profile camera is one of the most important neutron emission diagnostic devices operating at JET. It gives useful information of the total neutron yield rate but also about the neutron emissivity distribution. Data analysis was performed in order to compare three different calibration methods. The data was collected from the deuterium campaign, C4, in the beginning of 2001. The thesis also includes a section about the implication of a neutron profile camera for ITER, where the issue regarding interface difficulties is in focus. The ITER JCT (Joint Central Team) proposal of a neutron camera for ITER is studied in some detail

  13. Neutron emissivity profile camera diagnostics considering present and future tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, S. [EURATOM-VR Association, Uppsala (Sweden)

    2001-12-01

    This thesis describes the neutron profile camera situated at JET. The profile camera is one of the most important neutron emission diagnostic devices operating at JET. It gives useful information of the total neutron yield rate but also about the neutron emissivity distribution. Data analysis was performed in order to compare three different calibration methods. The data was collected from the deuterium campaign, C4, in the beginning of 2001. The thesis also includes a section about the implication of a neutron profile camera for ITER, where the issue regarding interface difficulties is in focus. The ITER JCT (Joint Central Team) proposal of a neutron camera for ITER is studied in some detail.

  14. Car Deceleration Considering Its Own Velocity in Cellular Automata Model

    International Nuclear Information System (INIS)

    Li Keping

    2006-01-01

    In this paper, we propose a new cellular automaton model, which is based on NaSch traffic model. In our method, when a car has a larger velocity, if the gap between the car and its leading car is not enough large, it will decrease. The aim is that the following car has a buffer space to decrease its velocity at the next time, and then avoid to decelerate too high. The simulation results show that using our model, the car deceleration is realistic, and is closer to the field measure than that of NaSch model.

  15. Quelques considérations sur la grippe aviaire

    Directory of Open Access Journals (Sweden)

    Michel Maffesoli

    2006-06-01

    Full Text Available Dans le totalitarisme doux étendant son voile sirupeux sur des masses inquiètes, l’on sait que les divers technocrates assoient leur pouvoir en entretenant la crainte. Ce qui n’est pas très compliqué, tant la peur de l’ombre, la peur de son ombre travaille tout un chacun. Si l’on doit caractériser l’époque, c’est bien le terme de lâcheté généralisée qui vient, immédiatement, à l’esprit. L’on sait que le virus de la grippe aviaire ne peut infecter l’homme que par contact direct et prolongé. Par exemple, boire l’eau d’un marais infecté de fiente d’oiseaux contaminés ou forniquer avec une poule atteinte de ce mal. De même, le danger de pandémie ne pourrait advenir que s’il y avait conjonction avec la grippe humaine. Ainsi, les virologues considèrent qu’il faudrait plusieurs centaines de personnes infectées par la grippe aviaire, dans un milieu lui-même en pleine épidémie de grippe humaine pour qu’il y ait un danger réel d’infection généralisée. Comme on le voit le risque est grand! Mais là n’est pas le problème. Il suffit, pour nos technocrates, que l’imaginaire de l’insécurité soit là. Ils y trouvent une raison d’être. Ils peuvent, savamment, jouer les utilités. On sait que de tous temps, c’est en misant sur une angoisse diffuse que les divers pouvoirs ont assis leur légitimité. En fait ce qui est à prendre au sérieux, ce sont les hystéries collectives. La chute spectaculaire de la consommation de volailles de toutes sortes en témoigne. Souvenons-nous aussi que n’est pas loin le temps où la même suspicion planait sur la viande bovine! Trêve de plaisanterie! Actualisons l’apologue. Ainsi l’émotion provoquée par le «double scandale» qui frapperait le C.N.R.S ne manque pas de susciter inquiétudes et interrogations. En terme d’épidémiologie bien entendu. Inquiétudes quant à la santé mentale du «milieu» sociologique capable de pétionner en m

  16. A Better Time Now to Consider New Reactors

    International Nuclear Information System (INIS)

    Agnihotri, Newal K.

    2004-01-01

    Mr. Christopher Crane, President and Chief Nuclear Officer of Exelon Nuclear was interviewed regarding his views on a series of questions related to the future of the nuclear industry in the United States. His view is that in order for new nuclear power plants to be considered, they must be economically competitive when compared to other baseload generation alternatives. With respect to capital cost, the industry has informally conveyed that overnight capital costs need to be below the range of $1,000-$1,200/kWE. Reactor vendors are working to reduce their first of a kind engineering costs to meet this capital cost threshold. Financing is then the next significant factor, which is complicated by whether the plant is being constructed in a regulated environment where the power company has the security of a regulated rate of return or as a merchant plant where the company assumes the risks and benefits of the proposed investment. With respect to operating and maintenance costs, the nuclear power industry has been dedicated to reducing costs while maintaining or improving safety. There are sound plans for spent fuel and high-level waste disposal, but there is a need to improve public confidence in transportation aspects. Regarding making new plants more attractive to investors, the risk factor has been a concern. The new Part 52 process is designed to help by requiring safety design issues to be identified and resolved prior to the issuance of the Combined Operating License (COL) process. While the revised process appears to be more acceptable from an investment risk perspective, there remains uncertainty in the fact that it has never been demonstrated. Skepticism, too, still exists with regard to building plants on schedule and within budget. Mr. Crane concludes that certain incentives will be needed for ''first movers'' in nuclear investment. These could include production tax credits, investment tax credits, government loan guarantees, and power purchase agreements

  17. [Can we consider the journalist an actor in suicide prevention?

    Science.gov (United States)

    Notredame, C-E; Pauwels, N; Vaiva, G; Danel, T; Walter, M

    2016-10-01

    After more than 50 years of dedicated research, media coverage of suicide is now well known to have a significant influence on the suicide epidemiology. This influence is supposed to result from two opposite effects. The Werther effect (WE) refers to the robust increase of suicide rates following the publication of a suicide story. This specific kind of mass cluster implies a suggestion process, i.e. imitation of the depicted death by vulnerable persons. In contract, the preventive potential of medias has been labeled the "Papageno effect" (PE). Although more recently discovered and far less known, PE predicts that journalists can help prevent suicidal behaviors beyond a simple WE reduction. Because PE and WE directly bridge journalistic productions to suicidal events, several national and international health organisms (including the World Health Organization) started to see the media as new prevention opportunities. In this paper, we intend to assess the extent to which journalists can be considered as public health actors in the specific field of suicide prevention. Based on a critical review of the so-called Media effect studies, we explore the opportunities, limits and constraints of collaborating with media professionals for public health actions. For that purpose, we focus on the main strategy employed so far, namely providing recommendations for more cautious coverage of suicide. An overview of the efficacy of these recommendations serves not only as a starting point for understanding how public health and journalistic perspectives can confront, but also how they can be combined in a fertile way. Numerous suicide prevention organisms developed strategies in order to assist journalists in reporting suicide stories in a safer way. As a formal support to these strategies, around 30 national or international guides have been produced around the word, with the shared aim of reducing WE and, eventually, promoting PE. The recommendations about articles' style

  18. Decision aids for people considering taking part in clinical trials.

    Science.gov (United States)

    Gillies, Katie; Cotton, Seonaidh C; Brehaut, Jamie C; Politi, Mary C; Skea, Zoe

    2015-11-27

    Several interventions have been developed to promote informed consent for participants in clinical trials. However, many of these interventions focus on the content and structure of information (e.g. enhanced information or changes to the presentation format) rather than the process of decision making. Patient decision aids support a decision making process about medical options. Decision aids support the decision process by providing information about available options and their associated outcomes, alongside information that enables patients to consider what value they place on particular outcomes, and provide structured guidance on steps of decision making. They have been shown to be effective for treatment and screening decisions but evidence on their effectiveness in the context of informed consent for clinical trials has not been synthesised. To assess the effectiveness of decision aids for clinical trial informed consent compared to no intervention, standard information (i.e. usual practice) or an alternative intervention on the decision making process. We searched the following databases and to March 2015: Cochrane Central Register of Controlled Trials (CENTRAL), The Cochrane Library; MEDLINE (OvidSP) (from 1950); EMBASE (OvidSP) (from 1980); PsycINFO (OvidSP) (from 1806); ASSIA (ProQuest) (from 1987); WHO International Clinical Trials Registry Platform (ICTRP) (http://apps.who.int/trialsearch/); ClinicalTrials.gov; ISRCTN Register (http://www.controlled-trials.com/isrctn/). We also searched reference lists of included studies and relevant reviews. We contacted study authors and other experts. There were no language restrictions. We included randomised and quasi-randomised controlled trials comparing decision aids in the informed consent process for clinical trials alone, or in conjunction with standard information (such as written or verbal) or alongside alternative interventions (e.g. paper-based versus web-based decision aids). Included trials involved

  19. Is Montenegro Considered as a Sports-Recreational Destination?

    Directory of Open Access Journals (Sweden)

    Sanja Pekovic

    2018-06-01

    Full Text Available The paper aims to examine if, according to the tourists coming to the country, Montenegro is considered as a sport-recreational destination. The data used in the study is extracted from the Montenegrin survey called Guest Survey 2014, comprising of 35 questions related to the tourist travel behavior and satisfaction during their stay in Montenegro. The paper uses the results of the study to provide descriptive statistics concerning the motives of tourist to visit Montenegro (one of the question is related to sport-recreational activities. Furthermore, it verifi es link between tourists’ motivation related to sport -recreational activities to come to Montenegro and their overall satisfaction with sport -recreational activities. The results indicated that only around 1% of tourists in our sample who visited Montenegro indicated sport- recreational activities as the main motive for the visit, around 3% of tourists indicated sport- recreational activities as a second motive while around 5% of tourists indicated sport and recreational activities as the third motive. However, around 60% of tourists reported that they were satisfi ed with overall sport -recreational activities during their stay in Montenegro. This study shows that even that Montenegrin sport-recreational off er is on the satisfactory level, managers and policy-makers should provide additional eff ort to present Montenegro as a sport-recreational destination since very low percentage of tourists are motivated to visit Montenegro related to these activities. The paper thus concludes by setting recommendations related to diversifi cation of Montenegrin tourism off er by pursuing sports-recreational tourism forms.

  20. A wind turbine hybrid simulation framework considering aeroelastic effects

    Science.gov (United States)

    Song, Wei; Su, Weihua

    2015-04-01

    In performing an effective structural analysis for wind turbine, the simulation of turbine aerodynamic loads is of great importance. The interaction between the wake flow and the blades may impact turbine blades loading condition, energy yield and operational behavior. Direct experimental measurement of wind flow field and wind profiles around wind turbines is very helpful to support the wind turbine design. However, with the growth of the size of wind turbines for higher energy output, it is not convenient to obtain all the desired data in wind-tunnel and field tests. In this paper, firstly the modeling of dynamic responses of large-span wind turbine blades will consider nonlinear aeroelastic effects. A strain-based geometrically nonlinear beam formulation will be used for the basic structural dynamic modeling, which will be coupled with unsteady aerodynamic equations and rigid-body rotations of the rotor. Full wind turbines can be modeled by using the multi-connected beams. Then, a hybrid simulation experimental framework is proposed to potentially address this issue. The aerodynamic-dominant components, such as the turbine blades and rotor, are simulated as numerical components using the nonlinear aeroelastic model; while the turbine tower, where the collapse of failure may occur under high level of wind load, is simulated separately as the physical component. With the proposed framework, dynamic behavior of NREL's 5MW wind turbine blades will be studied and correlated with available numerical data. The current work will be the basis of the authors' further studies on flow control and hazard mitigation on wind turbine blades and towers.

  1. Considering the Influence of Nonadaptive Evolution on Primate Color Vision.

    Directory of Open Access Journals (Sweden)

    Rachel L Jacobs

    need to consider adaptive and nonadaptive mechanisms of color vision evolution in primates.

  2. Hysteretic Models Considering Axial-Shear-Flexure Interaction

    Science.gov (United States)

    Ceresa, Paola; Negrisoli, Giorgio

    2017-10-01

    Most of the existing numerical models implemented in finite element (FE) software, at the current state of the art, are not capable to describe, with enough reliability, the interaction between axial, shear and flexural actions under cyclic loading (e.g. seismic actions), neglecting crucial effects for predicting the nature of the collapse of reinforced concrete (RC) structural elements. Just a few existing 3D volume models or fibre beam models can lead to a quite accurate response, but they are still computationally inefficient for typical applications in earthquake engineering and also characterized by very complex formulation. Thus, discrete models with lumped plasticity hinges may be the preferred choice for modelling the hysteretic behaviour due to cyclic loading conditions, in particular with reference to its implementation in a commercial software package. These considerations lead to this research work focused on the development of a model for RC beam-column elements able to consider degradation effects and interaction between the actions under cyclic loading conditions. In order to develop a model for a general 3D discrete hinge element able to take into account the axial-shear-flexural interaction, it is necessary to provide an implementation which involves a corrector-predictor iterative scheme. Furthermore, a reliable constitutive model based on damage plasticity theory is formulated and implemented for its numerical validation. Aim of this research work is to provide the formulation of a numerical model, which will allow implementation within a FE software package for nonlinear cyclic analysis of RC structural members. The developed model accounts for stiffness degradation effect and stiffness recovery for loading reversal.

  3. Integrated building energy systems design considering storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    Stadler, Michael; Marnay, Chris; Lai, Judy; Aki, Hirohisa (Lawrence Berkeley National Laboratory (United States)). e-mail: MStadler@lbl.gov; Siddiqui, Afzal (Dept. of Statistical Science at Univ. College London (United Kingdom))

    2009-07-01

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic, as well as environmental attraction of micro-generation systems (e.g. PV or fuel cells with or without CHP) and contribute to enhanced demand response. The interactions among PV, solar thermal, and storage systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of storage technologies on demand response and CO{sub 2} emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that can pursue two strategies as its objective function. These two strategies are minimization of its annual energy costs or of its CO{sub 2} emissions. The problem is solved for a given test year at representative customer sites, e.g. nursing homes, to obtain not only the optimal investment portfolio, but also the optimal hourly operating schedules for the selected technologies. This paper focuses on analysis of storage technologies in micro-generation optimization on a building level, with example applications in New York State and California. It shows results from a two-year research project performed for the U.S. Dept. of Energy and ongoing work. Contrary to established expectations, our results indicate that PV and electric storage adoption compete rather than supplement each other considering the tariff structure and costs of electricity supply. The work shows that high electricity tariffs during on-peak hours are a significant driver for the adoption of electric storage technologies. To satisfy the site's objective of minimizing energy costs, the batteries have to be charged by grid power during off-peak hours instead of PV during on-peak hours. In contrast, we also show a CO{sub 2} minimization strategy where the common assumption that batteries can be charged by PV can be fulfilled at extraordinarily high energy costs for the site.

  4. Land use allocation model considering climate change impact

    Science.gov (United States)

    Lee, D. K.; Yoon, E. J.; Song, Y. I.

    2017-12-01

    In Korea, climate change adaptation plans are being developed for each administrative district based on impact assessments constructed in various fields. This climate change impact assessments are superimposed on the actual space, which causes problems in land use allocation because the spatial distribution of individual impacts may be different each other. This implies that trade-offs between climate change impacts can occur depending on the composition of land use. Moreover, the actual space is complexly intertwined with various factors such as required area, legal regulations, and socioeconomic values, so land use allocation in consideration of climate change can be very difficult problem to solve (Liu et al. 2012; Porta et al. 2013).Optimization techniques can generate a sufficiently good alternatives for land use allocation at the strategic level if only the fitness function of relationship between impact and land use composition are derived. It has also been noted that land use optimization model is more effective than the scenario-based prediction model in achieving the objectives for problem solving (Zhang et al. 2014). Therefore in this study, we developed a quantitative tool, MOGA (Multi Objective Genetic Algorithm), which can generate a comprehensive land use allocations considering various climate change impacts, and apply it to the Gangwon-do in Korea. Genetic Algorithms (GAs) are the most popular optimization technique to address multi-objective in land use allocation. Also, it allows for immediate feedback to stake holders because it can run a number of experiments with different parameter values. And it is expected that land use decision makers and planners can formulate a detailed spatial plan or perform additional analysis based on the result of optimization model. Acknowledgments: This work was supported by the Korea Ministry of Environment (MOE) as "Climate Change Correspondence Program (Project number: 2014001310006)"

  5. Integrated Building Energy Systems Design Considering Storage Technologies

    International Nuclear Information System (INIS)

    Stadler, Michael; Marnay, Chris; Siddiqui, Afzal; Lai, Judy; Aki, Hirohisa

    2009-01-01

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic, as well as environmental attraction of micro-generation systems (e.g., PV or fuel cells with or without CHP) and contribute to enhanced demand response. The interactions among PV, solar thermal, and storage systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of storage technologies on demand response and CO2 emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that can pursue two strategies as its objective function. These two strategies are minimization of its annual energy costs or of its CO2 emissions. The problem is solved for a given test year at representative customer sites, e.g., nursing homes, to obtain not only the optimal investment portfolio, but also the optimal hourly operating schedules for the selected technologies. This paper focuses on analysis of storage technologies in micro-generation optimization on a building level, with example applications in New York State and California. It shows results from a two-year research project performed for the U.S. Department of Energy and ongoing work. Contrary to established expectations, our results indicate that PV and electric storage adoption compete rather than supplement each other considering the tariff structure and costs of electricity supply. The work shows that high electricity tariffs during on-peak hours are a significant driver for the adoption of electric storage technologies. To satisfy the site's objective of minimizing energy costs, the batteries have to be charged by grid power during off-peak hours instead of PV during on-peak hours. In contrast, we also show a CO2 minimization strategy where the common assumption that batteries can be charged by PV can be fulfilled at extraordinarily high energy costs for the site

  6. Optimal Scheduling of Residential Microgrids Considering Virtual Energy Storage System

    Directory of Open Access Journals (Sweden)

    Weiliang Liu

    2018-04-01

    Full Text Available The increasingly complex residential microgrids (r-microgrid consisting of renewable generation, energy storage systems, and residential buildings require a more intelligent scheduling method. Firstly, aiming at the radiant floor heating/cooling system widely utilized in residential buildings, the mathematical relationship between the operative temperature and heating/cooling demand is established based on the equivalent thermodynamic parameters (ETP model, by which the thermal storage capacity is analyzed. Secondly, the radiant floor heating/cooling system is treated as virtual energy storage system (VESS, and an optimization model based on mixed-integer nonlinear programming (MINLP for r-microgrid scheduling is established which takes thermal comfort level and economy as the optimization objectives. Finally, the optimal scheduling results of two typical r-microgrids are analyzed. Case studies demonstrate that the proposed scheduling method can effectively employ the thermal storage capacity of radiant floor heating/cooling system, thus lowering the operating cost of the r-microgrid effectively while ensuring the thermal comfort level of users.

  7. Dynamic characteristics analysis of deployable space structures considering joint clearance

    Science.gov (United States)

    Li, Tuanjie; Guo, Jian; Cao, Yuyan

    2011-04-01

    The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.

  8. Microgrid optimal scheduling considering impact of high penetration wind generation

    Science.gov (United States)

    Alanazi, Abdulaziz

    The objective of this thesis is to study the impact of high penetration wind energy in economic and reliable operation of microgrids. Wind power is variable, i.e., constantly changing, and nondispatchable, i.e., cannot be controlled by the microgrid controller. Thus an accurate forecasting of wind power is an essential task in order to study its impacts in microgrid operation. Two commonly used forecasting methods including Autoregressive Integrated Moving Average (ARIMA) and Artificial Neural Network (ANN) have been used in this thesis to improve the wind power forecasting. The forecasting error is calculated using a Mean Absolute Percentage Error (MAPE) and is improved using the ANN. The wind forecast is further used in the microgrid optimal scheduling problem. The microgrid optimal scheduling is performed by developing a viable model for security-constrained unit commitment (SCUC) based on mixed-integer linear programing (MILP) method. The proposed SCUC is solved for various wind penetration levels and the relationship between the total cost and the wind power penetration is found. In order to reduce microgrid power transfer fluctuations, an additional constraint is proposed and added to the SCUC formulation. The new constraint would control the time-based fluctuations. The impact of the constraint on microgrid SCUC results is tested and validated with numerical analysis. Finally, the applicability of proposed models is demonstrated through numerical simulations.

  9. Simultaneous Helmert transformations among multiple frames considering all relevant measurements

    Science.gov (United States)

    Chang, Guobin; Lin, Peng; Bian, Hefang; Gao, Jingxiang

    2018-03-01

    Helmert or similarity models are widely employed to relate different coordinate frames. It is often encountered in practice to transform coordinates from more than one old frame into a new one. One may perform separate Helmert transformations for each old frame. However, although each transformation is locally optimal, this is not globally optimal. Transformations among three frames, namely one new and two old, are studied as an example. Simultaneous Helmert transformations among all frames are also studied. Least-squares estimation of the transformation parameters and the coordinates in the new frame of all stations involved is performed. A functional model for the transformations among multiple frames is developed. A realistic stochastic model is followed, in which not only non-common stations are taken into consideration, but also errors in all measurements are addressed. An algorithm of iterative linearizations and estimations is derived in detail. The proposed method is globally optimal, and, perhaps more importantly, it produces a unified network of the new frame providing coordinate estimates for all involved stations and the associated covariance matrix, with the latter being consistent with the true errors of the former. Simulations are conducted, and the results validate the superiority of the proposed combined method over separate approaches.

  10. Hospitals Capability in Response to Disasters Considering Surge Capacity Approach

    Directory of Open Access Journals (Sweden)

    Gholamreza Khademipour

    2016-01-01

    Full Text Available Background: The man-made and natural disasters have adverse effects with sound, apparent, and unknown consequences. Among various components of disaster management in health sector, the most important role is performed by health-treatment systems, especially hospitals. Therefore, the present study aimed to evaluate the surge capacity of hospitals of Kerman Province in disaster in 2015. Materials and Methods: This is a quantitative study, conducted on private, military, and medical sciences hospitals of Kerman Province. The sampling method was total count and data collection for the research was done by questionnaire. The first section of the questionnaire included demographic information of the studied hospitals and second part examined the hospital capacity in response to disasters in 4 fields of equipment, physical space, human resources, and applied programs. The extracted data were analyzed by descriptive statistics. Results: The mean capability of implementing the surge capacity programs by hospitals of Kerman Province in disasters and in 4 fields of equipment, physical space, human resources, and applied programs was evaluated as 7.33% (weak. The surge capacity capability of state hospitals in disasters was computed as 8% and compared to private hospitals (6.07% had a more suitable condition. Conclusion: Based on the results of study and significance of preparedness of hospitals in response to disasters, it is proposed that managers of studied hospitals take measures to promote the hospital response capacity to disasters based on 4 components of increasing hospital capacity.

  11. Retrofit of heat exchanger networks considering pressure drop and existing structure: a new targeting procedure

    International Nuclear Information System (INIS)

    PanjehShahi, M.H.; Nouzari, M.M.

    2002-01-01

    A new retrofit targeting procedure, based on pinch technology has been developed. The procedure considers existing structure and hydrodynamic system of a given network as two main constraint during targeting. The procedure uses a linear programming model to consider existing structure. The model finds a network structure that has maximum compatibility with existing structure. Furthermore, the procedure using the pressure drop equations, can consider decreasing the film coefficients of streams due to increasing network area. Good compatibility between old and new networks and non replacement of hydrodynamic equipment cause to the best use of capital in retrofit projects. The procedure has been checked by doing two case studies, in which the results compared to the established methods, and realized significant improvement

  12. Study on Design Optimization of Centrifugal Compressors Considering Efficiency and Weight

    International Nuclear Information System (INIS)

    Lee, Younghwan; Kang, Shinhyoung; Ha, Kyunggu

    2015-01-01

    Various centrifugal compressors are currently used extensively in industrial fields, where the design requirements are more complicated. This makes it more difficult to determine the optimal design point of a centrifugal compressor. Traditionally, the efficiency is an important factor for optimization. In this study, the weight of the compressor was also considered. The aim of this study was to present the design tendency considering the stage efficiency and weight. In addition, this study suggested possibility of a selection of compressor design objectives at an early design stage based on the optimization results. Only a vaneless diffuser was considered in this case. The Kriging method was used with sample points from 1D design program data. The optimal points were determined in a substitute design space.

  13. Study on Design Optimization of Centrifugal Compressors Considering Efficiency and Weight

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Younghwan; Kang, Shinhyoung [Seoul National University, Seoul (Korea, Republic of); Ha, Kyunggu [Hyundai Motor Group, Ulsan (Korea, Republic of)

    2015-04-15

    Various centrifugal compressors are currently used extensively in industrial fields, where the design requirements are more complicated. This makes it more difficult to determine the optimal design point of a centrifugal compressor. Traditionally, the efficiency is an important factor for optimization. In this study, the weight of the compressor was also considered. The aim of this study was to present the design tendency considering the stage efficiency and weight. In addition, this study suggested possibility of a selection of compressor design objectives at an early design stage based on the optimization results. Only a vaneless diffuser was considered in this case. The Kriging method was used with sample points from 1D design program data. The optimal points were determined in a substitute design space.

  14. Considering the potential of IAR emissions for ionospheric sounding

    Science.gov (United States)

    Potapov, A. S.; Polyushkina, T. N.; Tsegmed, B.; Oinats, A. V.; Pashinin, A. Yu.; Edemskiy, I. K.; Mylnikova, A. A.; Ratovsky, K. G.

    2017-11-01

    develop a method for evaluating the ionosphere critical frequency using the IAR emission observations. Such a method may prove to be useful as an additional alternative to the basic method for probing the ionosphere using digisondes. This is especially important for auroral regions, where the presence of strong absorption, shielding by a lower layer, stratification, the presence of echoes, etc. make the sounding difficult.

  15. Investigating CALL in the Classroom: Situational Variables to Consider

    Directory of Open Access Journals (Sweden)

    Darlene Liutkus

    2012-01-01

    Full Text Available A new paradigm in second language pedagogy has Computer Assisted Language Learning (CALL playing a significant role. Much of the literature to-date claims that CALL can have a positive impact on students’ second language acquisition (SLA. Mixed method of research produces data to investigate if CALL positively affects student language proficiency, motivation and autonomy. Classroom observation of participants in their natural environment is a qualitative technique used but has situational variables that could skew results if not structured. A questionnaire is a quantitative tool that can offer insight regarding participants’ perception of performance but can contradict what the researcher has observed. This paper will take an in-depth look at variables such as: instructor’s pedagogical application; blending CALL into the curriculum; types of CALL implemented; feedback received and their implications for design of the data collection tools

  16. Optimal Shape Design of Pyeongyeong Considering Structural and Acoustical Characteristics

    International Nuclear Information System (INIS)

    Lee, Seungmok; Kang, Minseok; Lee, Jin Woo

    2014-01-01

    An optimal shape design algorithm is suggested to systematically design a traditional Korean musical instrument, the Pyeongyeong. The Pyeongyeong consists of 16 different chime stones called Gyeongpyeons. The first natural vibration frequency of each Gyeongpyeon must be adjusted to its target frequency, which is determined by the traditional sound tuning method. The second and third natural frequencies must be proportional to the first natural frequency with a specific ratio (1:1.498:2.378). The key idea in our suggested design algorithm is to use the sensitivity of natural frequencies to the variation in the length of each side of a Gyeongpyeon. The dimensions of five different Gyeongpyeons are determined by following the suggested algorithm. Changes in natural frequencies with respect to local thickness variation are closely investigated to compensate for errors that may occur during manufacturing

  17. Optimizing wind farm cable routing considering power losses

    DEFF Research Database (Denmark)

    Fischetti, Martina; Pisinger, David

    2017-01-01

    Wind energy is the fastest growing source of renewable energy, but as wind farms are getting larger and more remotely located, installation and infrastructure costs are rising. It is estimated that the expenses for electrical infrastructure account for 15-30% of the overall initial costs, hence...... that must be spent immediately in cable and installation costs, and the future reduced revenues due to power losses. The latter goal has not been addressed in previous work. We present a Mixed-Integer Linear Programming approach to optimize the routing using both exact and math-heuristic methods....... In the power losses computation, wind scenarios are handled eciently as part of the preprocessing, resulting in a MIP model of only slightly larger size. A library of real-life instances is introduced and made publicly available for benchmarking. Computational results on this testbed show the viability of our...

  18. Optimizing wind farm cable routing considering power losses

    DEFF Research Database (Denmark)

    Fischetti, Martina; Pisinger, David

    Wind energy is the fastest growing source of renewable energy, but as wind farms are getting larger and more remotely located, installation and infrastructure costs are rising. It is estimated that the expenses for electrical infrastructure account for 15-30% of the overall initial costs, hence...... that must be spent immediately in cable and installation costs, and the future reduced revenues due to power losses. The latter goal has not been addressed in previous work. We present a Mixed-Integer Linear Programming approach to optimize the routing using both exact and math-heuristic methods....... In the power losses computation, wind scenarios are handled eciently as part of the preprocessing, resulting in a MIP model of only slightly larger size. A library of real-life instances is introduced and made publicly available for benchmarking. Computational results on this testbed show the viability of our...

  19. Usability evaluation of a locomotor therapy device considering different strategies

    Directory of Open Access Journals (Sweden)

    Langthaler Sonja

    2016-09-01

    Full Text Available Usability of medical devices is one of the main determining factors in preventing use errors in treatment and strongly correlates to patient safety and quality of treatment. This thesis demonstrates the usability testing and evaluation of a prototype for locomotor therapy of infants. Therefore, based on the normative requirements of the EN 62366, a concept combined of evaluation procedures and assessing methods was created to enable extensive testing and analysis of the different aspects of usability. On the basis of gathered information weak points were identified and appropriate measures were presented to increase the usability and operating safety of the locomotor prototype. The overall outcome showed an usability value of 77.4% and an evaluation score of 6.99, which can be interpreted as “satisfactory”.

  20. Considering Materials Management in Construction: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Zakaria Dakhli

    2018-03-01

    Full Text Available While materials count for a considerable amount of construction costs, the way materials are managed seems to be improvised rather than approached methodically. This study investigates the practice of novel techniques used to manage materials in the construction industry. Techniques that have already proven themselves to be efficient ways to manage the production pace within the industry include the pull system, Just-In-Time, Kitting and off-site fabrication. These are explained and assessed in the context of the French construction industry through an exploratory study, supported by a questionnaire completed by contractors. The results reveal that a clear plan to manage materials on-site is lacking among the respondents, creating common inventory problems. This research provides evidence to support the central role played by an efficient management of material flow on-site. It also highlights the obstacles that hinder the adoption of innovative techniques, such as sub-contractor coordination.

  1. Optimal Shape Design of Pyeongyeong Considering Structural and Acoustical Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seungmok; Kang, Minseok [Gyeonggi Science High School, Suwon (Korea, Republic of); Lee, Jin Woo [Ajou Univ., Suwon (Korea, Republic of)

    2014-03-15

    An optimal shape design algorithm is suggested to systematically design a traditional Korean musical instrument, the Pyeongyeong. The Pyeongyeong consists of 16 different chime stones called Gyeongpyeons. The first natural vibration frequency of each Gyeongpyeon must be adjusted to its target frequency, which is determined by the traditional sound tuning method. The second and third natural frequencies must be proportional to the first natural frequency with a specific ratio (1:1.498:2.378). The key idea in our suggested design algorithm is to use the sensitivity of natural frequencies to the variation in the length of each side of a Gyeongpyeon. The dimensions of five different Gyeongpyeons are determined by following the suggested algorithm. Changes in natural frequencies with respect to local thickness variation are closely investigated to compensate for errors that may occur during manufacturing.

  2. Numerical analysis of Sakiadis flow problem considering Maxwell nanofluid

    Directory of Open Access Journals (Sweden)

    Mustafa Meraj

    2017-01-01

    Full Text Available This article investigates the flow of Maxwell nanofluid over a moving plate in a calm fluid. Novel aspects of Brownian motion and thermophoresis are taken into consideration. Revised model for passive control of nanoparticle volume fraction at the plate is used in this study. The formulated differential system is solved numerically by employing shooting approach together with fourth-fifth-order-Runge-Kutta integration procedure and Newton’s method. The solutions are greatly influenced with the variation of embedded parameters which include the local Deborah number, the Brownian motion parameter, the thermophoresis parameter, the Prandtl number, and the Schmidt number. We found that the variation in velocity distribution with an increase in local Deborah number is non-monotonic. Moreover, the reduced Nusselt number has a linear and direct relationship with the local Deborah number.

  3. Multiobjective Location Routing Problem considering Uncertain Data after Disasters

    Directory of Open Access Journals (Sweden)

    Keliang Chang

    2017-01-01

    Full Text Available The relief distributions after large disasters play an important role for rescue works. After disasters there is a high degree of uncertainty, such as the demands of disaster points and the damage of paths. The demands of affected points and the velocities between two points on the paths are uncertain in this article, and the robust optimization method is applied to deal with the uncertain parameters. This paper proposes a nonlinear location routing problem with half-time windows and with three objectives. The affected points can be visited more than one time. The goals are the total costs of the transportation, the satisfaction rates of disaster nodes, and the path transport capacities which are denoted by vehicle velocities. Finally, the genetic algorithm is applied to solve a number of numerical examples, and the results show that the genetic algorithm is very stable and effective for this problem.

  4. Vaginal semisolid products: Technological performance considering physiologic parameters.

    Science.gov (United States)

    Machado, Rita Monteiro; Palmeira-de-Oliveira, Ana; Martinez-de-Oliveira, José; Palmeira-de-Oliveira, Rita

    2017-11-15

    Vaginal semisolid products are frequently used to treat vaginal infections and atrophy-related symptoms of menopause. Formulations composition and the methods for their characterization, especially those developed concerning the target epithelia, are key tools to predict in vivo results at early stages of product development. However, recent studies on this subject have been almost exclusively focused on anti-HIV preparations. The aim of this work consists on improving traditional characterization methods by using physiological parameters in order to construct predictive tools to characterize a new ideal vaginal semisolid formulation whatever target it may have. Ten vaginal antimicrobial and hormonal products already available in the market were studied (Gino-Canesten®, Sertopic®, Dermofix®, Gyno-pevaryl®, Lomexin®, Gino Travogen®, Dalacin V®, Ovestin®, Blissel®, Colpotrophine®). Furthermore, Universal Placebo gel and Replens® were used for comparison. Products were characterized in terms of: pH and buffering capacity in a vaginal fluid simulant (VFS); osmolality - directly and upon dilution in VFS; textural parameters (firmness, adhesiveness and bioadhesion) using vaginal ex vivo porcine epithelium; and viscosity (including VFS dilution at 37°C and after administration on an ex vivo model). Interestingly, the majority of the tested commercial vaginal formulations did not present technological characteristics close to the ideal ones when tested under target biological conditions. The inclusion of such methodologic adaptations is expected to optimize cost-efficiency of new formulations development by predicting efficacy and safety profiles at early stages of product development. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Considering ethics, aesthetics and the dignity of the individual.

    Science.gov (United States)

    Strebler, Aline; Valentin, Claude

    2014-03-01

    There are variations on vulnerability that are often based on opposing authorities. In his book Parcours de la reconnaissance, Paul Ricœur offers a reflection grounded in a survey from Aristotle to Levinas, with way stations in phenomenology, from Hegel to Husserl. He sketches the silhouette of capable man. In a reversal of thinking and positioning, weakness, which could be considered the hallmark of disability in all its forms, becomes a source of mutual wealth and an argument in favour of reciprocity and dialogue. Relying on clinical examples, we propose art as a mediator of the doctor-patient relationship, which in its present unique form forces us to question the dynamics of empathy. A. Strebler A FEW GRAMS OF GOLD IN AN INSECURE WORLD: Vulnerability has long gone hand in hand with precarity. It is disturbing in a world where all is 'comfort and beauty, calm and bliss.' Additionally, vulnerability is a type of wound and wounds are what knit the relationship between patient and care provider. Similarly disturbing is poverty: the pauper is "without": without work, without a home, without a legal residency permit, without money… Poverty is also a wound, and yet it may serve as a path to "truth," according to the philosopher Simone Weil. These two concepts, equally vulnerable, question man's finite nature, and may serve as an introduction to the art of living together. In the midst of this ambiguity, the word "art" stands out. It is a counter-power, a challenge to established authority and politico-economic forms of government; it is inessential, unclassifiable, ungraspable, unthinkable and cannot be evaluated. Art avenges the abyss of ambiguity. C. Valentin COMMON SUMMARY: This article, composed of two core pieces, was written for a common project leading to the creation of a university degree at Paris 5 University (chaired by Pr. Hervé): Ethics, Aesthetics and the Dignity of the Individual. Together, they serve as a forum for reflection and dialogue in which

  6. Considering resistance in systematic reviews of antibiotic treatment.

    Science.gov (United States)

    Leibovici, Leonard; Soares-Weiser, Karla; Paul, Mical; Goldberg, Elad; Herxheimer, Andrew; Garner, Paul

    2003-10-01

    Microorganisms resistant to antibiotic drugs are a threat to the health and chances of survival of patients. Systematic reviews on antibiotic drugs that ignore the topic of resistance present readers with a skewed view, emphasizing short-term efficacy or effectiveness while ignoring long-term consequences. To examine whether systematic reviews of antibiotic treatment consider resistance; if not, to find out whether data on resistance were reported in the original trials; and based on that, to offer a framework for taking resistance into account in systematic reviews. The Cochrane Database of Systematic Reviews (the Cochrane Library, 2001, issue 2); and MEDLINE, 1996-2000. (i) Systematic reviews or meta-analyses of antimicrobial therapy, published during 1996-2000. (ii) Randomized, controlled trials abstracted in systematic reviews that addressed a topic highly relevant to antibiotic resistance. We examined each systematic review, and each article, to see whether the implications of resistance were discussed; and whether data on resistance were collected. Out of 111 systematic reviews, only 44 (40%) discussed resistance. Ten reviews (9%) planned or performed collection of data on the response of patients with susceptible or resistant isolates. In 22 systematic reviews (20%), collection of data on induction of resistance was planned or performed. The topic of 41 reviews was judged highly relevant to resistance, and these reviews extracted data from 337 articles, out of which we retrieved 279 articles (83%). In 201 (72%) articles, resistance was discussed or data pertaining to it were collected. Ninety-seven articles (35%) gave actual data on resistance of pathogens to the study drugs, 71 articles (25%) data on efficacy of antibiotic drugs in patients with susceptible and resistant pathogens, and 55 articles (20%) provided data on infection or colonization with resistant strains during treatment. Most systematic reviews on antibiotic treatment ignored the issue of

  7. Safety in GPR prospecting: a rarely-considered issue

    Science.gov (United States)

    Persico, Raffaele; Pajewski, Lara; Trela, Christiane; Carrick Utsi, Erica

    2016-04-01

    Safety issues (of people first of all, but also of the equipment and environment) are rarely considered in Ground-Penetrating Radar (GPR) prospecting and, more in general, in near-surface geophysical prospecting. As is right and fully understandable, the scientific community devotes greatest attention first of all to the theoretical and practical aspects of GPR technique, affecting the quality of attainable results, secondly to the efforts and costs needed to achieve them [1-2]. However, the (luckily) growing GPR market and range of applications make it worth giving serious consideration to safety issues, too. The existing manuals dealing with safety in geophysics are mainly concerned with applications requiring "deep" geophysical prospecting, for example the search for oilfields and other hydrocarbon resources [3]. Near-surface geophysics involves less dangers than deep geophysics, of course. Nevertheless, several accidents have already happened during GPR experimental campaigns. We have personally had critical experiences and collected reliable testimonies concerning occurred problems as mountain sicks, fractures of legs, stomach problems, allergic reactions, encounters with potentially-dangerous animals, and more. We have also noticed that much more attention is usually paid to safety issues during indoor experimental activities (in laboratory), rather than during outdoor fieldworks. For example, the Italian National research Council is conventioned with safety experts who hold periodical seminaries about safety aspects. Having taken part to some of them, to our experience we have never heard a "lecture" devoted to outdoor prospecting. Nowadays, any aspects associated to the use of the technologies should be considered. The increasing sensibility and sense of responsibility towards environmental matters impose GPR end-users to be careful not to damage the environment and also the cultural heritage. Near-surface prospecting should not compromise the flora and

  8. Denoising Algorithm for CFA Image Sensors Considering Inter-Channel Correlation.

    Science.gov (United States)

    Lee, Min Seok; Park, Sang Wook; Kang, Moon Gi

    2017-05-28

    In this paper, a spatio-spectral-temporal filter considering an inter-channel correlation is proposed for the denoising of a color filter array (CFA) sequence acquired by CCD/CMOS image sensors. Owing to the alternating under-sampled grid of the CFA pattern, the inter-channel correlation must be considered in the direct denoising process. The proposed filter is applied in the spatial, spectral, and temporal domain, considering the spatio-tempo-spectral correlation. First, nonlocal means (NLM) spatial filtering with patch-based difference (PBD) refinement is performed by considering both the intra-channel correlation and inter-channel correlation to overcome the spatial resolution degradation occurring with the alternating under-sampled pattern. Second, a motion-compensated temporal filter that employs inter-channel correlated motion estimation and compensation is proposed to remove the noise in the temporal domain. Then, a motion adaptive detection value controls the ratio of the spatial filter and the temporal filter. The denoised CFA sequence can thus be obtained without motion artifacts. Experimental results for both simulated and real CFA sequences are presented with visual and numerical comparisons to several state-of-the-art denoising methods combined with a demosaicing method. Experimental results confirmed that the proposed frameworks outperformed the other techniques in terms of the objective criteria and subjective visual perception in CFA sequences.

  9. Seismic margin analysis for Kashiwazaki Kariwa ABWR plant considering the Niigataken Chuetsu-oki earthquake

    International Nuclear Information System (INIS)

    Matsuo, Toshihiro; Nagasawa, Kazuyuki; Kawamura, Shinichi; Ueki, Takashi; Higuchi, Tomokazu; Sakaki, Isao

    2009-01-01

    Seismic Margin Analysis (SMA) study was conducted for Kashiwazaki Kariwa (KK) ABWR representative plant (unit 6). Considering that the installation behaved in a safe manner during and after the Niigataken Chuetsu-oki (NCO) Earthquake which significantly exceeded the level of the seismic input taken into account in the design of the plant, the study to find out how much margin the ABWR plant had toward the same seismic motion was conducted. In this study fragility analyses were conducted for SSCs that were included in the accident sequences and that were considered to have relatively small margin taking EPRI margin analysis method into consideration. In order to calculate plant level seismic margin Min-Max method was adopted. As the result of this study, the plant level High Confidence Low Probability of Failure (HCLPF) acceleration for unit 6 was calculated more than tripled NCO earthquake motion. (author)

  10. Time history nonlinear earthquake response analysis considering materials and geometrical nonlinearity

    International Nuclear Information System (INIS)

    Kobayashi, T.; Yoshikawa, K.; Takaoka, E.; Nakazawa, M.; Shikama, Y.

    2002-01-01

    A time history nonlinear earthquake response analysis method was proposed and applied to earthquake response prediction analysis for a Large Scale Seismic Test (LSST) Program in Hualien, Taiwan, in which a 1/4 scale model of a nuclear reactor containment structure was constructed on sandy gravel layer. In the analysis both of strain-dependent material nonlinearity, and geometrical nonlinearity by base mat uplift, were considered. The 'Lattice Model' for the soil-structure interaction model was employed. An earthquake record on soil surface at the site was used as control motion, and deconvoluted to the input motion of the analysis model at GL-52 m with 300 Gal of maximum acceleration. The following two analyses were considered: (A) time history nonlinear, (B) equivalent linear, and the advantage of time history nonlinear earthquake response analysis method is discussed

  11. Orthodontic informed consent considering information load and serial position effect.

    Science.gov (United States)

    Pawlak, Caroline E; Fields, Henry W; Beck, F Michael; Firestone, Allen R

    2015-03-01

    Previous research has demonstrated that current methods of informed consent are relatively ineffective as shown by poor recall and comprehension by adolescent patients and their parents. The purpose of this study was to determine whether adding a short videotape presentation reiterating the issues related to informed consent to a modified informed consent document that emphasizes a limited number of core and patient-specific custom "chunks" at the beginning of an informed consent presentation improved the recall and comprehension of the risks, benefits, and alternatives of orthodontic treatment. A second objective was to evaluate the current related data for recommendable practices. Seventy patient-parent pairs were randomly divided into 2 groups. The intervention group (group A) patients and parents together reviewed a customized slide show and a short videotape presentation describing the key risks of orthodontic treatment. Group B followed the same protocol without viewing the videotape. All patients and parents were interviewed independently by research assistants using an established measurement tool with open-ended questions. Interviews were transcribed and scored for the appropriateness of responses using a previously established codebook. Lastly, the patients and parents were given 2 reading literacy tests, 1 related to health and 1 with general content followed by the self-administered demographic and psychological state questionnaires. There were no significant differences between the groups for sociodemographic variables. There were no significant differences between the groups for overall recall and comprehension; recall and comprehension for the domains of treatment, risk, and responsibility; and recall and comprehension for core, general, and custom items. The positional effects were limited in impact. When compared with previous studies, these data further demonstrate the benefit of improved readability and audiovisual supplementation with the

  12. Urban Heat Wave Vulnerability Analysis Considering Climate Change

    Science.gov (United States)

    JE, M.; KIM, H.; Jung, S.

    2017-12-01

    Much attention has been paid to thermal environments in Seoul City in South Korea since 2016 when the worst heatwave in 22 years. It is necessary to provide a selective measure by singling out vulnerable regions in advance to cope with the heat wave-related damage. This study aims to analyze and categorize vulnerable regions of thermal environments in the Seoul and analyzes and discusses the factors and risk factors for each type. To do this, this study conducted the following processes: first, based on the analyzed various literature reviews, indices that can evaluate vulnerable regions of thermal environment are collated. The indices were divided into climate exposure index related to temperature, sensitivity index including demographic, social, and economic indices, and adaptation index related to urban environment and climate adaptation policy status. Second, significant variables were derived to evaluate a vulnerable region of thermal environment based on the summarized indices in the above. this study analyzed a relationship between the number of heat-related patients in Seoul and variables that affected the number using multi-variate statistical analysis to derive significant variables. Third, the importance of each variable was calculated quantitatively by integrating the statistical analysis results and analytic hierarchy process (AHP) method. Fourth, a distribution of data for each index was identified based on the selected variables and indices were normalized and overlapped. Fifth, For the climate exposure index, evaluations were conducted as same as the current vulnerability evaluation method by selecting future temperature of Seoul predicted through the representative concentration pathways (RCPs) climate change scenarios as an evaluation variable. The results of this study can be utilized as foundational data to establish a countermeasure against heatwave in Seoul. Although it is limited to control heatwave occurrences itself completely, improvements

  13. Some specifics considering the urban territories river discharge determination

    Directory of Open Access Journals (Sweden)

    Chilikova-Lubomirova Mila

    2018-01-01

    Full Text Available Urban territories are specific territories with a significant anthropogenic influence on the natural environment. As a result most of the existing natural conditions have been modified. Parts of them cover the natural forms of river beds and floodplains. Concerning to the humans safety, comfort and needs, while keeping ecosystems healthy function, different artificial structures also have been created. The process is connected to the well understanding and good quality data obtaining about the existing conditions and river flow behaviour, that are interconnected and relevant to the river discharge determination and its variations description – key issue for the entire river structures project, water extremes mitigation and maintaining a healthy state of the ecosystems. For the purpose various contact measurements and monitoring procedures are implemented. To clarify the process this material aims to present some specifics connected to the urban territories river discharge determination and the possibility for related monitoring networks creation. It is focused on the most used methods, their specifics and possible challenges for practical application. Main specifics connected to the related decision support systems creation and implementations are also presented. Main purpose is such state of the art dissemination, in help of decision makers and professionals in the area.

  14. Novel approach to assess local market power considering transmission constraints

    International Nuclear Information System (INIS)

    Li, Canbing; Xia, Qing; Kang, Chongqing; Jiang, Jianjian

    2008-01-01

    Market power (MP) assessment and mitigation affect the efficiency of the generation market. The traditional indices such as HHI and Lerner index can not express local market power, which caused by transmission constraints. Transmission constraints divide the market into some smaller parts. Some generators can abuse their MP in one part but not in the whole market. This paper describes a new approach to assess market power. The main contributions of the new method can be summarized as following. First, the concept of local market is developed, and the whole power system is divided into several local markets, as transmission congestions dividing the market. In the local markets, there are no transmission constraints so local market power does not exist. Then the local market power index (LMPI) is calculated according to market concentration, transmission constraints, and demand-supply ratio. Based on LMPI, the integrated local market power index which describes the whole picture of market can be obtained. It has been proved that the new approach can assess market power exactly, and identify the critical factor that results in market power and where generators are easy to exercise market power. The finding in this paper is helpful for market monitoring and mitigating market power. Moreover, the new index can be used to evaluate the power grid availability to generation competition and the power transmission expansion planning. (author)

  15. Stochastic dynamic analysis of marine risers considering Gaussian system uncertainties

    Science.gov (United States)

    Ni, Pinghe; Li, Jun; Hao, Hong; Xia, Yong

    2018-03-01

    This paper performs the stochastic dynamic response analysis of marine risers with material uncertainties, i.e. in the mass density and elastic modulus, by using Stochastic Finite Element Method (SFEM) and model reduction technique. These uncertainties are assumed having Gaussian distributions. The random mass density and elastic modulus are represented by using the Karhunen-Loève (KL) expansion. The Polynomial Chaos (PC) expansion is adopted to represent the vibration response because the covariance of the output is unknown. Model reduction based on the Iterated Improved Reduced System (IIRS) technique is applied to eliminate the PC coefficients of the slave degrees of freedom to reduce the dimension of the stochastic system. Monte Carlo Simulation (MCS) is conducted to obtain the reference response statistics. Two numerical examples are studied in this paper. The response statistics from the proposed approach are compared with those from MCS. It is noted that the computational time is significantly reduced while the accuracy is kept. The results demonstrate the efficiency of the proposed approach for stochastic dynamic response analysis of marine risers.

  16. Postbuckling Investigations of Piezoelectric Microdevices Considering Damage Effects

    Science.gov (United States)

    Sun, Zhigang; Wang, Xianqiao

    2014-01-01

    Piezoelectric material has been emerging as a popular building block in MEMS devices owing to its unique mechanical and electrical material properties. However, the reliability of MEMS devices under buckling deformation environments remains elusive and needs to be further explored. Based on the Talreja's tensor valued internal state damage variables as well as the Helmhotlz free energy of piezoelectric material, a constitutive model of piezoelectric materials with damage is presented. The Kachanvo damage evolution law under in-plane compressive loads is employed. The model is applied to the specific case of the postbuckling analysis of the piezoelectric plate with damage. Then, adopting von Karman's plate theory, the nonlinear governing equations of the piezoelectric plates with initial geometric deflection including damage effects under in-plane compressive loads are established. By using the finite difference method and the Newmark scheme, the damage evolution for damage accumulation is developed and the finite difference procedure for postbuckling equilibrium path is simultaneously employed. Numerical results show the postbuckling behaviors of initial flat and deflected piezoelectric plates with damage or no damage under different sets of electrical loading conditions. The effects of applied voltage, aspect ratio of plate, thick-span ratio of plate, damage as well as initial geometric deflections on the postbuckling behaviors of the piezoelectric plate are discussed. PMID:24618774

  17. Dynamic cellular manufacturing system considering machine failure and workload balance

    Science.gov (United States)

    Rabbani, Masoud; Farrokhi-Asl, Hamed; Ravanbakhsh, Mohammad

    2018-02-01

    Machines are a key element in the production system and their failure causes irreparable effects in terms of cost and time. In this paper, a new multi-objective mathematical model for dynamic cellular manufacturing system (DCMS) is provided with consideration of machine reliability and alternative process routes. In this dynamic model, we attempt to resolve the problem of integrated family (part/machine cell) formation as well as the operators' assignment to the cells. The first objective minimizes the costs associated with the DCMS. The second objective optimizes the labor utilization and, finally, a minimum value of the variance of workload between different cells is obtained by the third objective function. Due to the NP-hard nature of the cellular manufacturing problem, the problem is initially validated by the GAMS software in small-sized problems, and then the model is solved by two well-known meta-heuristic methods including non-dominated sorting genetic algorithm and multi-objective particle swarm optimization in large-scaled problems. Finally, the results of the two algorithms are compared with respect to five different comparison metrics.

  18. Proton fragmentation functions considering finite-mass corrections

    Energy Technology Data Exchange (ETDEWEB)

    Moosavi Nejad, S.M. [Yazd University, Faculty of Physics, Yazd (Iran, Islamic Republic of); Institute for Research in Fundamental Sciences (IPM), School of Particles and Accelerators, Tehran (Iran, Islamic Republic of); Soleymaninia, M. [Payame Noor Universtiy, Department of Physics, Tehran (Iran, Islamic Republic of); Maktoubian, A. [Yazd University, Faculty of Physics, Yazd (Iran, Islamic Republic of)

    2016-10-15

    We present new sets of proton fragmentation functions (FFs) describing the production of protons from the gluon and each of the quarks, obtained by the NLO QCD fits to all relevant data sets of single-inclusive electron-positron annihilation. Specifically, we determine their uncertainties using the Gaussian method for error estimation. Our analysis is in good agreement with the e{sup +}e{sup -} annihilation data. We also include finite-mass effects of the proton in our calculations, a topic to which very little attention is paid in the literature. Proton mass effects turn out to be appreciable for gluon and light quark FFs. The inclusion of finite-mass effects tends to improve the overall description of the data by reducing the minimized χ{sup 2} values significantly. As an application, we apply the extracted FFs to make predictions for the scaled-energy distribution of protons inclusively produced in top quark decays at next-to-leading order, relying on the universality and scaling violations of FFs. (orig.)

  19. Hybrid Corporate Performance Prediction Model Considering Technical Capability

    Directory of Open Access Journals (Sweden)

    Joonhyuck Lee

    2016-07-01

    Full Text Available Many studies have tried to predict corporate performance and stock prices to enhance investment profitability using qualitative approaches such as the Delphi method. However, developments in data processing technology and machine-learning algorithms have resulted in efforts to develop quantitative prediction models in various managerial subject areas. We propose a quantitative corporate performance prediction model that applies the support vector regression (SVR algorithm to solve the problem of the overfitting of training data and can be applied to regression problems. The proposed model optimizes the SVR training parameters based on the training data, using the genetic algorithm to achieve sustainable predictability in changeable markets and managerial environments. Technology-intensive companies represent an increasing share of the total economy. The performance and stock prices of these companies are affected by their financial standing and their technological capabilities. Therefore, we apply both financial indicators and technical indicators to establish the proposed prediction model. Here, we use time series data, including financial, patent, and corporate performance information of 44 electronic and IT companies. Then, we predict the performance of these companies as an empirical verification of the prediction performance of the proposed model.

  20. GENERAL ISSUES CONSIDERING BRAND EQUITY WITHIN THE NATION BRANDING PROCESS

    Directory of Open Access Journals (Sweden)

    Denisa, COTÎRLEA

    2014-11-01

    Full Text Available The present work-paper was written in order to provide an overview of the intangible values that actively contribute to brand capital formation within the nation branding process; through this article, the author tried to emphasize the differences existent between brand capital and brand equity within the context of the nation branding process, which has became a widely approached subject both in the national and international literature. Also, the evolution of brand capital and brand equity was approached, in order to identify and explain their components and their role, by highlighting the entire process of their evolution under a sequence of steps scheme. The results of this paper are focused on the identification of a structured flowchart through which the process of nation branding -and the brand capital itself- are to be perceived as holistic concepts, integrator and inter-correlated ones, easily understood.The methodology used in order to write the present article resumes to all appropriate methods and techniques used for collecting and processing empirical data and information, respectively to observing, sorting, correlating, categorizing, comparing and analyzing data, so that the addressed theoretical elements could have been founded; in the center of the qualitative thematic research addressed in the present article lie general elements belonging to Romania's image and identity promotion.

  1. Operation of roof pond systems, considering its advantages and disadvantages

    Energy Technology Data Exchange (ETDEWEB)

    Noohi, Samira; Rezaei, Davood [Faculty of engineering, Zanjan University (Iran, Islamic Republic of)], email: noohi.sam@gmail.com, email: d_rezaei@znu.ac.ir

    2011-07-01

    With the coming shortage of fossil fuels it is important to develop energy efficient buildings to reduce both energy consumption and pollution at the same time. The roof pond system is a passive solar system which gathers heat from the sun and can distribute it to the living space to cool it or heat it by changing the operating cycle. Although not recent, this method has not been widely implemented due to certain limitations and the aim of this paper is to assess the different advantages and disadvantages of this system over other passive solar heating systems. This study showed that a roof pond has a low impact on the building, provides controllable energy delivery and variations in indoor temperature are low; however it requires an active solar system as a backup and vegetation can limit sunlight penetration. This study highlighted that the efficiency of the roof system pond depends on climate conditions and that it is best suited to lower latitude and low humidity areas.

  2. Considering the use of polyethylene vapour barriers in temperate climates

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, M.D. [Morrison Hershfield Ltd., Vancouver, BC (Canada); Brown, W.C. [Morrison Hershfield Ltd., Ottawa, ON (Canada)

    2003-07-01

    Most building envelope assemblies in Canada must include a vapour barrier in order to comply with Canadian building codes. The installation of sheet polyethylene between the studs and the interior sheathing has been the most common method because it provides more diffusion resistance than necessary to control condensation within a building envelope assembly. It has been suggested that the presence of a polyethylene vapour barrier on the warm-in-winter side of the insulation may actually cause moisture problems because a very low permeance material increases average moisture levels. This paper examined the theory that a vapour barrier at this location restricts drying of moisture that enters the building from outside. Pacific coastal regions of Canada and the United States were presented as examples. Other ways that a polyethylene vapour barrier affects wall performance were also presented. The advanced hygrothermal model HygIRC, developed by Canada's National Research Council, was used to simulate the performance of a wall assembly. Results indicate that eliminating the low permeance polyethylene vapour barrier does not necessarily reduce the risk of moisture problems. Removal of the vapour barrier may have some negative effects, such as increased risk of periodic moisture accumulation and mold growth on paper-faced gypsum board. 7 refs., 2 tabs., 7 figs.

  3. [Complete denture occlusion considered from occlusal contacts during mastication].

    Science.gov (United States)

    Suzuki, Tetsuya

    2004-12-01

    Few reports describe the functional superiority of full balanced occlusion to that of lingualized occlusion. Recently, a bilateral balanced scheme has been much more generally applied than a unilateral balanced scheme in lingualized occlusion as well as in full balanced occlusion. Occlusal contacts on the non-chewing side occur earlier than on the chewing side;in the order of second molar, first molar, and then premolars. The contact on the balancing side contributes to the prevention of denture dislocation and guidance from eccentric positions to the centric occlusal position during mastication. Therefore, bilateral balanced occlusion was shown to be effective for denture stability during mastication with complete dentures. Today's typical edentulous patients have greater mean age than in the past, and thus are seen with severe alveolar bone resorption, thin mucosa and sometimes abnormalities of the maxillomandibular relation. Their occlusal positions are often unstable and changeable after insertion of complete dentures. Because lingualized occlusion allows for easier accommodation and correction, lingualized occlusion is more suitable for such cases than full balanced occlusion, which requires a strict occlusal relationship. In light of the standard Japanese diet, there is some doubt about why lingualized occlusion might be suitable for Japanese edentulous patients in terms of the sense of mastication. A method of evaluating the sense of mastication needs to be established.

  4. Geographical distribution of hot flash frequencies: considering climatic influences.

    Science.gov (United States)

    Sievert, Lynnette Leidy; Flanagan, Erin K

    2005-10-01

    Laboratory studies suggest that hot flashes are triggered by small elevations in core body temperature acting within a reduced thermoneutral zone, i.e., the temperature range in which a woman neither shivers nor sweats. In the present study, it was hypothesized that women in different populations develop climate-specific thermoneutral zones, and ultimately, population-specific frequencies of hot flashes at menopause. Correlations were predicted between hot flash frequencies and latitude, elevation, and annual temperatures. Data on hot flash frequencies were drawn from 54 studies. Pearson correlation analyses and simple linear regressions were applied, first using all studies, and second using a subset of studies that included participants only to age 60 (n = 36). Regressions were repeated with all studies, controlling for method of hot flash assessment. When analyses were restricted to studies that included women up to age 60, average temperature of the coldest month was a significant predictor of hot flash frequency (P hottest and coldest temperatures was also a significant predictor (P coldest month, difference between hottest and coldest temperatures, and mean annual temperature were significant predictors of hot flash frequency. Women reported fewer hot flashes in warmer temperatures, and more hot flashes with increasing seasonality. These results suggest that acclimatization to coldest temperatures or sensitivity to seasonality may explain part of the population variation in hot flash frequency.

  5. Considering fluctuation energy as a measure of gyrokinetic turbulence

    International Nuclear Information System (INIS)

    Plunk, G G; Tatsuno, T; Dorland, W

    2012-01-01

    In gyrokinetic theory, there are two quadratic measures of fluctuation energy, left invariant under nonlinear interactions, that constrain turbulence. In a recent work (Plunk and Tatsuno 2011 Phys. Rev. Lett. 106 165003) we reported on the novel consequences that this constraint has for the direction and locality of spectral energy transfer. This paper builds on that previous work. We provide a detailed analysis in support of the results of Plunk and Tatsuno (2011 Phys. Rev. Lett. 106 165003), but significantly broaden the scope and use additional methods to address the problem of energy transfer. The perspective taken here is that the fluctuation energies are not merely formal invariants of an idealized model (two-dimensional gyrokinetics (Plunk et al 2010 J. Fluid Mech. 664 407–35)) but also general measures of gyrokinetic turbulence, i.e. quantities that can be used to predict the behavior of turbulence. Although many questions remain open, this paper collects evidence in favor of this perspective by demonstrating in several contexts that constrained spectral energy transfer governs the dynamics. (paper)

  6. The importance of considering pushback time and arrivals when routing departures on the ground at airports

    OpenAIRE

    Stergianos, Christofas; Atkin, Jason; Schittekat, Patrick; Nordlander, Tomas Eric; Gerada, C.; Morvan, Herve

    2016-01-01

    With the constant increase in air traffic, airports are facing capacity problems. Many airports are increasingly interested in utilising optimisation methods for specific airport processes. However, many such processes do happen in parallel, and maximising the potential benefits will require a complex optimisation model. A model which considers multiple processes simultaneously and the detailed complexities of the processes, rather than using more abstract models. This paper investigates how ...

  7. Decision aid prototype development for parents considering adenotonsillectomy for their children with sleep disordered breathing

    OpenAIRE

    Maguire, Erin; Hong, Paul; Ritchie, Krista; Meier, Jeremy; Archibald, Karen; Chorney, Jill

    2016-01-01

    Background To describe the process involved in developing a decision aid prototype for parents considering adenotonsillectomy for their children with sleep disordered breathing. Methods A paper-based decision aid prototype was developed using the framework proposed by the International Patient Decision Aids Standards Collaborative. The decision aid focused on two main treatment options: watchful waiting and adenotonsillectomy. Usability was assessed with parents of pediatric patients and prov...

  8. The Effect of Environmental Policy by Considering the Mediating Role of Customer Satisfaction and Loyalty

    OpenAIRE

    Safshekan, Sedigheh

    2014-01-01

    ABSTRACT: This thesis aimed to explore the effects of environmental policies (EP) on three dependent variables including customer satisfaction (CS), customer loyalty (CL) and market performance (MP). It also investigated the effects of employing EP on hotel market performance by considering the mediating role of customer satisfaction and customer loyalty in this relationship. Through a quantitative research method, a survey questionnaire administered to international tourists and managers of ...

  9. Determination of the carbon market incremental payoff considering a stochastic jump-diffusion process

    Directory of Open Access Journals (Sweden)

    Fabio Rodrigo Siqueira Batista

    2013-12-01

    Full Text Available The objective of this paper is to verify the robustness of the Least Square Monte Carlo and Grant, Vora & Weeks methods when used to determine the incremental payoff of the carbon market for renewable electricity generation projects, considering that the behavior of the price of Certified Emission Reductions, otherwise known as Carbon Credits, may be modeled using a jump-diffusion process. In addition, this paper analyses particular characteristics, such as absence of monotonicity, found in trigger curves obtained through use of the Grant, Vora & Weeks method to valuate these types of project.

  10. Simulation of distribution nets for natural gas, in stationary state considering the compressible effects

    International Nuclear Information System (INIS)

    Valbuena C, Javier

    1997-01-01

    The general method is presented to calculate the losses of pressure in a RTD starting from the geometry of the net (diameter and longitude), of the real behavior of the gas, of the ruggedness of the pipe and of the flow, considering the compressibility of the fluid so much as the influence of the compressible effects. The simulation method is derived of the principles of conservation of mass and energy for a gas that follows a reversible poly tropic process of stable state and stable flow - stationary regime

  11. Estimating Probable Maximum Precipitation by Considering Combined Effect of Typhoon and Southwesterly Air Flow

    Directory of Open Access Journals (Sweden)

    Cheng-Chin Liu

    2016-01-01

    Full Text Available Typhoon Morakot hit southern Taiwan in 2009, bringing 48-hr of heavy rainfall [close to the Probable Maximum Precipitation (PMP] to the Tsengwen Reservoir catchment. This extreme rainfall event resulted from the combined (co-movement effect of two climate systems (i.e., typhoon and southwesterly air flow. Based on the traditional PMP estimation method (i.e., the storm transposition method, STM, two PMP estimation approaches, i.e., Amplification Index (AI and Independent System (IS approaches, which consider the combined effect are proposed in this work. The AI approach assumes that the southwesterly air flow precipitation in a typhoon event could reach its maximum value. The IS approach assumes that the typhoon and southwesterly air flow are independent weather systems. Based on these assumptions, calculation procedures for the two approaches were constructed for a case study on the Tsengwen Reservoir catchment. The results show that the PMP estimates for 6- to 60-hr durations using the two approaches are approximately 30% larger than the PMP estimates using the traditional STM without considering the combined effect. This work is a pioneer PMP estimation method that considers the combined effect of a typhoon and southwesterly air flow. Further studies on this issue are essential and encouraged.

  12. Experimental Active Vibration Control in Truss Structures Considering Uncertainties in System Parameters

    Directory of Open Access Journals (Sweden)

    Douglas Domingues Bueno

    2008-01-01

    Full Text Available This paper deals with the study of algorithms for robust active vibration control in flexible structures considering uncertainties in system parameters. It became an area of enormous interest, mainly due to the countless demands of optimal performance in mechanical systems as aircraft, aerospace, and automotive structures. An important and difficult problem for designing active vibration control is to get a representative dynamic model. Generally, this model can be obtained using finite element method (FEM or an identification method using experimental data. Actuators and sensors may affect the dynamics properties of the structure, for instance, electromechanical coupling of piezoelectric material must be considered in FEM formulation for flexible and lightly damping structure. The nonlinearities and uncertainties involved in these structures make it a difficult task, mainly for complex structures as spatial truss structures. On the other hand, by using an identification method, it is possible to obtain the dynamic model represented through a state space realization considering this coupling. This paper proposes an experimental methodology for vibration control in a 3D truss structure using PZT wafer stacks and a robust control algorithm solved by linear matrix inequalities.

  13. Energy expansion planning by considering electrical and thermal expansion simultaneously

    International Nuclear Information System (INIS)

    Abbasi, Ali Reza; Seifi, Ali Reza

    2014-01-01

    Highlights: • This paper focused on the expansion planning optimization of energy systems. • Employing two form of energy: the expansion of electrical and thermal energies. • The main objective is to minimize the costs. • A new Modified Honey Bee Mating Optimization (MHBMO) algorithm is applied. - Abstract: This study focused on the expansion planning optimization of energy systems employing two forms of energy: the expansion of electrical and thermal energies simultaneously. The main objective of this investigation is confirming network adequacy by adding new equipment to the network, over a given planning horizon. The main objective of the energy expansion planning (EEP) is to minimize the real energy loss, voltage deviation and the total cost of installation equipments. Since the objectives are different and incommensurable, it is difficult to solve the problem by the conventional approaches that may optimize a single objective. So, the meta-heuristic algorithm is applied to this problem. Here, Honey Bee Mating Optimization algorithm (HBMO) as a new evolutionary optimization algorithm is utilized. In order to improve the total ability of HBMO for the global search and exploration, a new modification process is suggested such a way that the algorithm will search the total search space globally. Also, regarding the uncertainties of the new complicated energy systems, in this paper for the first time, the EEP problem is investigated in a stochastic environment by the use of probabilistic load flow technique based on Point Estimate Method (PEM). In order to evaluate the feasibility and effectiveness of the proposed algorithm, two modified test systems are used as case studies

  14. Energy resources for mankind considered from the earth evolution

    International Nuclear Information System (INIS)

    Ohno, Shin-ich; Shimizu, Saburo

    2005-01-01

    The amount of energy resources contained in Earth and that we mankind can use in future can be estimated on the basis of the information given by astrophysical and geochemical considerations. The kind of resources includes geothermal, nuclear, solar, and fossil energy. We believe that the results of these considerations, especially the method of thinking, may be taken into curriculum in high schools or introductory courses of university education. In school education relating to energy and environmental problems we think that it is more important for the students to learn how to think or estimate and how to solve the problems than to be given any established knowledge itself from the teachers and reference books or journals. Students are easily discouraged by teachers who are talking that petroleum will be exhausted in 40 years or that uranium-235 will be also exhausted unless we develop the nuclear fuel system utilizing uranium-238 breading. They seem afraid of insufficient left when they grow old. In this report we call the readers attention that the amount of energy resources contained in Earth is such that the mankind can never exhaust them and that they are waiting to be exploited or for the time to come when the technology for their utilization is developed. We also pay attention that too much consumption of energy surely affect the earth environment (heat pollution) - the limit will be the consumption rate of about 0.1 W/m 2 of the earth surface which equals to the heat emission rate from the earth surface toward the space. (author)

  15. Structural Bionic Design for Digging Shovel of Cassava Harvester Considering Soil Mechanics

    Directory of Open Access Journals (Sweden)

    Shihao Liu

    2014-01-01

    Full Text Available In order to improve the working performance of cassava harvester, structural bionic design for its digging shovel was conducted. Taking the oriental mole cricket's paws as bionic prototype, a new structural bionic design method for digging shovel was established, which considers the morphology-configuration-function coupling bionic. A comprehensive performance comparison method was proposed, which is used to select the bionic design schemes. The proposed bionic design method was used to improve digging shovel structure of a digging-pulling style cassava harvester, and nine bionic-type digging shovels were obtained with considering the impact of soil mechanics. After conducting mechanical properties comparative analysis for bionic-type digging shovels, the bionic design rules were summed up, and the optimal design scheme of digging shovel was obtained through combining the proposed comprehensive performance comparison method with Analytic Hierarchy Process (AHP. Studies have shown that bionic design method not only can improve the overall mechanical properties of digging shovel, but also can help to improve the harvesting effect of cassava harvester, which provides a new idea for crops harvesting machinery's structural optimization design.

  16. A Multiple Period Problem in Distributed Energy Management Systems Considering CO2 Emissions

    Science.gov (United States)

    Muroda, Yuki; Miyamoto, Toshiyuki; Mori, Kazuyuki; Kitamura, Shoichi; Yamamoto, Takaya

    Consider a special district (group) which is composed of multiple companies (agents), and where each agent responds to an energy demand and has a CO2 emission allowance imposed. A distributed energy management system (DEMS) optimizes energy consumption of a group through energy trading in the group. In this paper, we extended the energy distribution decision and optimal planning problem in DEMSs from a single period problem to a multiple periods one. The extension enabled us to consider more realistic constraints such as demand patterns, the start-up cost, and minimum running/outage times of equipment. At first, we extended the market-oriented programming (MOP) method for deciding energy distribution to the multiple periods problem. The bidding strategy of each agent is formulated by a 0-1 mixed non-linear programming problem. Secondly, we proposed decomposing the problem into a set of single period problems in order to solve it faster. In order to decompose the problem, we proposed a CO2 emission allowance distribution method, called an EP method. We confirmed that the proposed method was able to produce solutions whose group costs were close to lower-bound group costs by computational experiments. In addition, we verified that reduction in computational time was achieved without losing the quality of solutions by using the EP method.

  17. Identification of cutting force coefficients in machining process considering cutter vibration

    Science.gov (United States)

    Yao, Qi; Luo, Ming; Zhang, Dinghua; Wu, Baohai

    2018-03-01

    Among current cutting force models, cutting force coefficients still are the foundation of predicting calculation combined with consideration of geometry engagement variation, equipment characteristics, material properties and so on. Attached with unimpeachable significance, the traditional and some novel identification methods of cutting force coefficient are still faced with trouble, including repeated onerous work, over ideal measuring condition, variation of value due to material divergence, interference from measuring units. To utilize the large amount of data from real manufacturing section, enlarge data sources and enrich cutting data base for former prediction task, a novel identification method is proposed by considering stiffness properties of the cutter-holder-spindle system in this paper. According to previously proposed studies, the direct result of cutter vibration is the form of dynamic undeformed chip thickness. This fluctuation is considered in two stages of this investigation. Firstly, a cutting force model combined with cutter vibration is established in detailed way. Then, on the foundation of modeling, a novel identification method is developed, in which the dynamic undeformed chip thickness could be obtained by using collected data. In a carefully designed experiment procedure, the reliability of model is validated by comparing predicted and measured results. Under different cutting condition and cutter stiffness, data is collected for the justification of identification method. The results showed divergence in calculated coefficients is acceptable confirming the possibility of accomplishing targets by applying this new method. In discussion, the potential directions of improvement are proposed.

  18. Efficient Terahertz Wide-Angle NUFFT-Based Inverse Synthetic Aperture Imaging Considering Spherical Wavefront

    Directory of Open Access Journals (Sweden)

    Jingkun Gao

    2016-12-01

    Full Text Available An efficient wide-angle inverse synthetic aperture imaging method considering the spherical wavefront effects and suitable for the terahertz band is presented. Firstly, the echo signal model under spherical wave assumption is established, and the detailed wavefront curvature compensation method accelerated by 1D fast Fourier transform (FFT is discussed. Then, to speed up the reconstruction procedure, the fast Gaussian gridding (FGG-based nonuniform FFT (NUFFT is employed to focus the image. Finally, proof-of-principle experiments are carried out and the results are compared with the ones obtained by the convolution back-projection (CBP algorithm. The results demonstrate the effectiveness and the efficiency of the presented method. This imaging method can be directly used in the field of nondestructive detection and can also be used to provide a solution for the calculation of the far-field RCSs (Radar Cross Section of targets in the terahertz regime.

  19. Characteristics for wind energy and wind turbines by considering vertical wind shear

    Institute of Scientific and Technical Information of China (English)

    郑玉巧; 赵荣珍

    2015-01-01

    The probability distributions of wind speeds and the availability of wind turbines were investigated by considering the vertical wind shear. Based on the wind speed data at the standard height observed at a wind farm, the power-law process was used to simulate the wind speeds at a hub height of 60 m. The Weibull and Rayleigh distributions were chosen to express the wind speeds at two different heights. The parameters in the model were estimated via the least square (LS) method and the maximum likelihood estimation (MLE) method, respectively. An adjusted MLE approach was also presented for parameter estimation. The main indices of wind energy characteristics were calculated based on observational wind speed data. A case study based on the data of Hexi area, Gansu Province of China was given. The results show that MLE method generally outperforms LS method for parameter estimation, and Weibull distribution is more appropriate to describe the wind speed at the hub height.

  20. Pinpointing Needles in Giant Haystacks: Use of Text Mining to Reduce Impractical Screening Workload in Extremely Large Scoping Reviews

    Science.gov (United States)

    Shemilt, Ian; Simon, Antonia; Hollands, Gareth J.; Marteau, Theresa M.; Ogilvie, David; O'Mara-Eves, Alison; Kelly, Michael P.; Thomas, James

    2014-01-01

    In scoping reviews, boundaries of relevant evidence may be initially fuzzy, with refined conceptual understanding of interventions and their proposed mechanisms of action an intended output of the scoping process rather than its starting point. Electronic searches are therefore sensitive, often retrieving very large record sets that are…

  1. Testing Method of Degrading Heavy Oil Pollution by Microorganisms

    Science.gov (United States)

    Wu, Qi; Zhao, Lin; Ma, Aijin

    2018-01-01

    With the development of human society, we are more and more relying on the petrochemical energy. The use of petrochemical energy not only brings us great convenience, but is also accompanied by a series of environmental pollution problems, especially oil pollution. Since it is impractical to restore all pollution problems, the proper use of some remedial measures, under the guidance of functional orientation, may be sufficient to minimize the risk of persistent and diffusing pollutants. In recent years, bioremediation technology has been gradually developed into a promising stage and has played a crucial role in the degradation of heavy oil pollution. Specially, microbes in the degradation of heavy oil have made a great contribution. This paper mainly summarizes the different kinds of microorganisms for degrading heavy oil and the detection method for degradation efficiency of heavy oil pollution.

  2. Maximum Simulated Likelihood and Expectation-Maximization Methods to Estimate Random Coefficients Logit with Panel Data

    DEFF Research Database (Denmark)

    Cherchi, Elisabetta; Guevara, Cristian

    2012-01-01

    with cross-sectional or with panel data, and (d) EM systematically attained more efficient estimators than the MSL method. The results imply that if the purpose of the estimation is only to determine the ratios of the model parameters (e.g., the value of time), the EM method should be preferred. For all......The random coefficients logit model allows a more realistic representation of agents' behavior. However, the estimation of that model may involve simulation, which may become impractical with many random coefficients because of the curse of dimensionality. In this paper, the traditional maximum...... simulated likelihood (MSL) method is compared with the alternative expectation- maximization (EM) method, which does not require simulation. Previous literature had shown that for cross-sectional data, MSL outperforms the EM method in the ability to recover the true parameters and estimation time...

  3. Equilibria in the competitive retail electricity market considering uncertainty and risk management

    International Nuclear Information System (INIS)

    Kharrati, Saeed; Kazemi, Mostafa; Ehsan, Mehdi

    2016-01-01

    In a medium term planning horizon, a retailer should determine its forward contracting and pool participating strategies as well as the selling price to be offered to the customers. Considering a competitive retail electricity market, the number of clients being supplied by any retailer is a function of the selling prices and some other characteristics of all the retailers. This paper presents an equilibrium problem formulation to model the retailer's medium term decision making problem considering the strategy of other retailers. Decision making of any single retailer is formulated as a risk constraint stochastic programming problem. Uncertainty of pool prices and clients' demands is modeled with scenario generation method and CVaR (conditional value at risk) is used as the risk measure. The resulting single retailer planning problem is a quadratic constrained programming problem which is solved using the Lagrangian relaxation method and the Nash equilibrium point of the competitive retailers is achieved by successive solving of this problem for all the retailers. The performance of the proposed method is demonstrated using a realistic case study of Texas electricity market. - Highlights: • Presenting an equilibrium problem formulation for the retailer's decision-making. • Modeling consumer's retail choice behavior with an econometric model. • Managing the retailer's risk caused by rivals' strategy through CVaR. • Approximating the nonlinear price-quota curve with a piecewise-linear function. • Decomposing the nonlinear optimization problem using Lagrangian relaxation method.

  4. Preventive Security-Constrained Optimal Power Flow Considering UPFC Control Modes

    Directory of Open Access Journals (Sweden)

    Xi Wu

    2017-08-01

    Full Text Available The successful application of the unified power flow controller (UPFC provides a new control method for the secure and economic operation of power system. In order to make the full use of UPFC and improve the economic efficiency and static security of a power system, a preventive security-constrained power flow optimization method considering UPFC control modes is proposed in this paper. Firstly, an iterative method considering UPFC control modes is deduced for power flow calculation. Taking into account the influence of different UPFC control modes on the distribution of power flow after N-1 contingency, the optimization model is then constructed by setting a minimal system operation cost and a maximum static security margin as the objective. Based on this model, the particle swarm optimization (PSO algorithm is utilized to optimize power system operating parameters and UPFC control modes simultaneously. Finally, a standard IEEE 30-bus system is utilized to demonstrate that the proposed method fully exploits the potential of static control of UPFC and significantly increases the economic efficiency and static security of the power system.

  5. Uncertainty Analysis of the Water Scarcity Footprint Based on the AWARE Model Considering Temporal Variations

    Directory of Open Access Journals (Sweden)

    Jong Seok Lee

    2018-03-01

    Full Text Available The purpose of this paper is to compare the degree of uncertainty of the water scarcity footprint using the Monte Carlo statistical method and block bootstrap method. Using the hydrological data of a water drainage basin in Korea, characterization factors based on the available water remaining (AWARE model were obtained. The uncertainties of the water scarcity footprint considering temporal variations in paddy rice production in Korea were estimated. The block bootstrap method gave five-times smaller percentage uncertainty values of the model output compared to that of the two different Monte Carlo statistical method scenarios. Incorrect estimation of the probability distribution of the AWARE characterization factor model is what causes the higher uncertainty in the water scarcity footprint value calculated by the Monte Carlo statistical method in this study. This is because AWARE characterization factor values partly follows discrete distribution with extreme value on one side. Therefore, this study suggests that the block bootstrap method is a better choice in analyzing uncertainty compared to the Monte Carlo statistical method when using the AWARE model to quantify the water scarcity footprint.

  6. Development of an ash particle deposition model considering build-up and removal mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Strandstroem, Kjell; Mueller, Christian; Hupa, Mikko [Aabo Akademi Process Chemistry Centre, Biskopsgatan 8, FI-20500 Aabo (Finland)

    2007-12-15

    Slagging and fouling on heat exchanger surfaces in power boilers fired with fossil fuels and fuel mixtures has a significant influence on boiler efficiency and availability. Mathematical modelling is since long considered a suitable method to assist boiler operators to determine optimized operating conditions for an existing furnace. The ultimate goal in ash deposition prediction is hereby the determination of the total amount of material deposited and hence the determination of the total reduction in efficiency. Depending on the fuels fired the total deposited mass is a combination of ash particle deposition and ash particle erosion due to non-sticky particles. The novel ash particle deposition model presented in this work considers deposition of sticky ash particles, cleansing of deposit by non-sticky sand particles and sticking of sand due to contact with sticky ash. The steady-state modelling results for the total amount of ash deposited on the deposition probe of an entrained flow reactor presented in this work agree well with the experimental data. Only at very high fractions of sand added as non-sticky material, a significant influence of the sand on the overall mass deposited was found. Since the model considers sticking of non-sticking sand due to contact with sticky ash, the fraction of sand deposited on the probe was especially studied. Using a correction factor to consider the influence of operating time on the steady-state simulations led to good agreement between simulations and experimental data. (author)

  7. Development of an ash particle deposition model considering build-up and removal mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Kjell Strandstroem; Christian Muellera; Mikko Hupa [Abo Akademi Process Chemistry Centre, Abo (Finland)

    2007-12-15

    Slagging and fouling on heat exchanger surfaces in power boilers fired with fossil fuels and fuel mixtures has a significant influence on boiler efficiency and availability. Mathematical modelling has long been considered a suitable method to assist boiler operators to determine optimized operating conditions for an existing furnace. The ultimate goal in ash deposition prediction is hereby the determination of the total amount of material deposited and hence the determination of the total reduction in efficiency. Depending on the fuels fired the total deposited mass is a combination of ash particle deposition and ash particle erosion due to non-sticky particles. The novel ash particle deposition model presented in this work considers deposition of sticky ash particles, cleansing of deposit by non-sticky sand particles and sticking of sand due to contact with sticky ash. The steady-state modelling results for the total amount of ash deposited on the deposition probe of an entrained flow reactor presented in this work agree well with the experimental data. Only at very high fractions of sand added as non-sticky material, a significant influence of the sand on the overall mass deposited was found. Since the model considers sticking of non-sticking sand due to contact with sticky ash, the fraction of sand deposited on the probe was especially studied. Using a correction factor to consider the influence of operating time on the steady-state simulations led to good agreement between simulations and experimental data. 12 refs., 10 figs.

  8. Inspection of freeform surfaces considering uncertainties in measurement, localization and surface reconstruction

    International Nuclear Information System (INIS)

    Mehrad, Vahid; Xue, Deyi; Gu, Peihua

    2013-01-01

    Inspection of a manufactured freeform surface can be conducted by building its surface model and comparing this manufactured surface model with the ideal design surface model and its tolerance requirement. The manufactured freeform surface model is usually achieved by obtaining measurement points on the manufactured surface, transforming these measurement points from the measurement coordinate system to the design coordinate system through localization, and reconstructing the surface model using the localized measurement points. In this research, a method was developed to estimate the locations and their variances of any selected points on the reconstructed freeform surface considering different sources of uncertainties in measurement, localization and surface reconstruction processes. In this method, first locations and variances of the localized measurement points are calculated considering uncertainties of the measurement points and uncertainties introduced in the localization processes. Then locations and variances of points on the reconstructed freeform surface are obtained considering uncertainties of the localized measurement points and uncertainties introduced in the freeform surface reconstruction process. Two case studies were developed to demonstrate how these three different uncertainty sources influence the quality of the reconstructed freeform curve and freeform surface in inspection. (paper)

  9. Integration of renewable generation uncertainties into stochastic unit commitment considering reserve and risk: A comparative study

    International Nuclear Information System (INIS)

    Quan, Hao; Srinivasan, Dipti; Khosravi, Abbas

    2016-01-01

    The uncertainties of renewable energy have brought great challenges to power system commitment, dispatches and reserve requirement. This paper presents a comparative study on integration of renewable generation uncertainties into SCUC (stochastic security-constrained unit commitment) considering reserve and risk. Renewable forecast uncertainties are captured by a list of PIs (prediction intervals). A new scenario generation method is proposed to generate scenarios from these PIs. Different system uncertainties are considered as scenarios in the stochastic SCUC problem formulation. Two comparative simulations with single (E1: wind only) and multiple sources of uncertainty (E2: load, wind, solar and generation outages) are investigated. Five deterministic and four stochastic case studies are performed. Different generation costs, reserve strategies and associated risks are compared under various scenarios. Demonstrated results indicate the overall costs of E2 is lower than E1 due to penetration of solar power and the associated risk in deterministic cases of E2 is higher than E1. It implies the superimposed effect of uncertainties during uncertainty integration. The results also demonstrate that power systems run a higher level of risk during peak load hours, and that stochastic models are more robust than deterministic ones. - Highlights: • An extensive comparative study for renewable integration is presented. • A novel scenario generation method is proposed. • Wind and solar uncertainties are represented by a list of prediction intervals. • Unit commitment and dispatch costs are discussed considering reserve and risk.

  10. Simplified analysis of frame structures with viscoelastic dampers considering the effect of soil-structure interaction

    Science.gov (United States)

    Zhao, Xuefei; Wang, Shuguang; Du, Dongsheng; Liu, Weiqing

    2017-01-01

    In this study, simplified numerical models are developed to analyze the soil-structure interaction (SSI) effect on frame structures equipped with viscoelastic dampers (VEDs) based on pile group foundation. First, a single degree-of-freedom (SDOF) oscillator is successfully utilized to replace the SDOF energy dissipated structure considering the SSI effect. The equivalent period and damping ratio of the system are obtained through analogical analysis using the frequency transfer function with adoption of the modal strain energy (MSE) technique. A parametric analysis is carried out to study the SSI effect on the performance of VEDs. Then the equilibrium equations of the multi degree-of-freedom (MDOF) structure with VEDs considering SSI effect are established in the frequency domain. Based on the assumption that the superstructure of the coupled system possesses the classical normal mode, the MDOF superstructure is decoupled to a set of individual SDOF systems resting on a rigid foundation with adoption of the MSE technique through formula derivation. Numerical results demonstrate that the proposed methods have the advantage of reducing computational cost, however, retaining the satisfactory accuracy. The numerical method proposed herein can provide a fast evaluation of the efficiency of VEDs considering the SSI effect.

  11. Intelligent control for PMSM based on online PSO considering parameters change

    Science.gov (United States)

    Song, Zhengqiang; Yang, Huiling

    2018-03-01

    A novel online particle swarm optimization method is proposed to design speed and current controllers of vector controlled interior permanent magnet synchronous motor drives considering stator resistance variation. In the proposed drive system, the space vector modulation technique is employed to generate the switching signals for a two-level voltage-source inverter. The nonlinearity of the inverter is also taken into account due to the dead-time, threshold and voltage drop of the switching devices in order to simulate the system in the practical condition. Speed and PI current controller gains are optimized with PSO online, and the fitness function is changed according to the system dynamic and steady states. The proposed optimization algorithm is compared with conventional PI control method in the condition of step speed change and stator resistance variation, showing that the proposed online optimization method has better robustness and dynamic characteristics compared with conventional PI controller design.

  12. Application of Interval Arithmetic in the Evaluation of Transfer Capabilities by Considering the Sources of Uncertainty

    Directory of Open Access Journals (Sweden)

    Prabha Umapathy

    2009-01-01

    Full Text Available Total transfer capability (TTC is an important index in a power system with large volume of inter-area power exchanges. This paper proposes a novel technique to determine the TTC and its confidence intervals in the system by considering the uncertainties in the load and line parameters. The optimal power flow (OPF method is used to obtain the TTC. Variations in the load and line parameters are incorporated using the interval arithmetic (IA method. The IEEE 30 bus test system is used to illustrate the proposed methodology. Various uncertainties in the line, load and both line and load are incorporated in the evaluation of total transfer capability. From the results, it is observed that the solutions obtained through the proposed method provide much wider information in terms of closed interval form which is more useful in ensuring secured operation of the interconnected system in the presence of uncertainties in load and line parameters.

  13. Day-Ahead Scheduling Considering Demand Response as a Frequency Control Resource

    Directory of Open Access Journals (Sweden)

    Yu-Qing Bao

    2017-01-01

    Full Text Available The development of advanced metering technologies makes demand response (DR able to provide fast response services, e.g., primary frequency control. It is recognized that DR can contribute to the primary frequency control like thermal generators. This paper proposes a day-ahead scheduling method that considers DR as a frequency control resource, so that the DR resources can be dispatched properly with other resources. In the proposed method, the objective of frequency control is realized by defining a frequency limit equation under a supposed contingency. The frequency response model is used to model the dynamics of system frequency. The nonlinear frequency limit equation is transformed to a linear arithmetic equation by piecewise linearization, so that the problem can be solved by mixed integer linear programming (MILP. Finally, the proposed method is verified on numerical examples.

  14. Want to Inspire Science Students to Consider a Research Career? Host a Scientist in Your Classroom

    Directory of Open Access Journals (Sweden)

    Patricia J. Baynham

    2010-04-01

    Full Text Available Most biology students have limited exposure to research since this is not a public activity and the pace of science does not lend itself to television dramatization. In contrast, medicine is the subject of numerous TV shows, and students’ experience visiting doctors may lead them to think they want to become physicians. One effective way to encourage these students to consider a research career is to invite engaging scientists to speak about their career paths and lives during class. Students are most likely to be influenced by people they consider to be like themselves. While this method is well-suited to a lecture format where the scientist can address a larger audience, the laboratory would also be appropriate.

  15. Maintainability analysis considering time-dependent and time-independent covariates

    International Nuclear Information System (INIS)

    Barabadi, Abbas; Barabady, Javad; Markeset, Tore

    2011-01-01

    Traditional parametric methods for assessing maintainability most often only consider time to repair (TTR) as a single explanatory variable. However, to predict availability more precisely for high availability systems, a better model is needed to quantify the effect of operational environment on maintainability. The proportional repair model (PRM), which is developed based on proportional hazard model (PHM), may be used to analyze maintainability in the present of covariates. In the PRM, the effect of covariates is considered to be time independent. However this assumption may not be valid for some situations. The aim of this paper is to develop the Cox regression model and its extension in the presence of time-dependent covariates for determining maintainability. A simple case study is used to demonstrate how the model can be applied in a real case.

  16. The Optimal Configuration Scheme of the Virtual Power Plant Considering Benefits and Risks of Investors

    Directory of Open Access Journals (Sweden)

    Jingmin Wang

    2017-07-01

    Full Text Available A virtual power plant (VPP is a special virtual unit that integrates various distributed energy resources (DERs distributed in the generation and consumption sides. The optimal configuration scheme of the VPP needs to break the geographical restrictions to make full use of DERs, considering the uncertainties. First, the components of the DERs and the structure of the VPP are briefly introduced. Next, the cubic exponential smoothing method is adopted to predict the VPP load requirement. Finally, the optimal configuration of the DER capacities inside the VPP is calculated by using portfolio theory and genetic algorithms (GA. The results show that the configuration scheme can optimize the DER capacities considering uncertainties, guaranteeing economic benefits of investors, and fully utilizing the DERs. Therefore, this paper provides a feasible reference for the optimal configuration scheme of the VPP from the perspective of investors.

  17. Dynamic Analysis of Partially Embedded Structures Considering Soil-Structure Interaction in Time Domain

    Directory of Open Access Journals (Sweden)

    Sanaz Mahmoudpour

    2011-01-01

    Full Text Available Analysis and design of structures subjected to arbitrary dynamic loadings especially earthquakes have been studied during past decades. In practice, the effects of soil-structure interaction on the dynamic response of structures are usually neglected. In this study, the effect of soil-structure interaction on the dynamic response of structures has been examined. The substructure method using dynamic stiffness of soil is used to analyze soil-structure system. A coupled model based on finite element method and scaled boundary finite element method is applied. Finite element method is used to analyze the structure, and scaled boundary finite element method is applied in the analysis of unbounded soil region. Due to analytical solution in the radial direction, the radiation condition is satisfied exactly. The material behavior of soil and structure is assumed to be linear. The soil region is considered as a homogeneous half-space. The analysis is performed in time domain. A computer program is prepared to analyze the soil-structure system. Comparing the results with those in literature shows the exactness and competency of the proposed method.

  18. Improving accuracy of protein-protein interaction prediction by considering the converse problem for sequence representation

    Directory of Open Access Journals (Sweden)

    Wang Yong

    2011-10-01

    Full Text Available Abstract Background With the development of genome-sequencing technologies, protein sequences are readily obtained by translating the measured mRNAs. Therefore predicting protein-protein interactions from the sequences is of great demand. The reason lies in the fact that identifying protein-protein interactions is becoming a bottleneck for eventually understanding the functions of proteins, especially for those organisms barely characterized. Although a few methods have been proposed, the converse problem, if the features used extract sufficient and unbiased information from protein sequences, is almost untouched. Results In this study, we interrogate this problem theoretically by an optimization scheme. Motivated by the theoretical investigation, we find novel encoding methods for both protein sequences and protein pairs. Our new methods exploit sufficiently the information of protein sequences and reduce artificial bias and computational cost. Thus, it significantly outperforms the available methods regarding sensitivity, specificity, precision, and recall with cross-validation evaluation and reaches ~80% and ~90% accuracy in Escherichia coli and Saccharomyces cerevisiae respectively. Our findings here hold important implication for other sequence-based prediction tasks because representation of biological sequence is always the first step in computational biology. Conclusions By considering the converse problem, we propose new representation methods for both protein sequences and protein pairs. The results show that our method significantly improves the accuracy of protein-protein interaction predictions.

  19. A Recurrent Neural Network Approach to Rear Vehicle Detection Which Considered State Dependency

    Directory of Open Access Journals (Sweden)

    Kayichirou Inagaki

    2003-08-01

    Full Text Available Experimental vision-based detection often fails in cases when the acquired image quality is reduced by changing optical environments. In addition, the shape of vehicles in images that are taken from vision sensors change due to approaches by vehicle. Vehicle detection methods are required to perform successfully under these conditions. However, the conventional methods do not consider especially in rapidly varying by brightness conditions. We suggest a new detection method that compensates for those conditions in monocular vision-based vehicle detection. The suggested method employs a Recurrent Neural Network (RNN, which has been applied for spatiotemporal processing. The RNN is able to respond to consecutive scenes involving the target vehicle and can track the movements of the target by the effect of the past network states. The suggested method has a particularly beneficial effect in environments with sudden, extreme variations such as bright sunlight and shield. Finally, we demonstrate effectiveness by state-dependent of the RNN-based method by comparing its detection results with those of a Multi Layered Perceptron (MLP.

  20. Reactive Power Pricing Model Considering the Randomness of Wind Power Output

    Science.gov (United States)

    Dai, Zhong; Wu, Zhou

    2018-01-01

    With the increase of wind power capacity integrated into grid, the influence of the randomness of wind power output on the reactive power distribution of grid is gradually highlighted. Meanwhile, the power market reform puts forward higher requirements for reasonable pricing of reactive power service. Based on it, the article combined the optimal power flow model considering wind power randomness with integrated cost allocation method to price reactive power. Meanwhile, considering the advantages and disadvantages of the present cost allocation method and marginal cost pricing, an integrated cost allocation method based on optimal power flow tracing is proposed. The model realized the optimal power flow distribution of reactive power with the minimal integrated cost and wind power integration, under the premise of guaranteeing the balance of reactive power pricing. Finally, through the analysis of multi-scenario calculation examples and the stochastic simulation of wind power outputs, the article compared the results of the model pricing and the marginal cost pricing, which proved that the model is accurate and effective.