WorldWideScience

Sample records for methods computer-readable media

  1. Systems, computer-implemented methods, and tangible computer-readable storage media for wide-field interferometry

    Science.gov (United States)

    Lyon, Richard G. (Inventor); Leisawitz, David T. (Inventor); Rinehart, Stephen A. (Inventor); Memarsadeghi, Nargess (Inventor)

    2012-01-01

    Disclosed herein are systems, computer-implemented methods, and tangible computer-readable storage media for wide field imaging interferometry. The method includes for each point in a two dimensional detector array over a field of view of an image: gathering a first interferogram from a first detector and a second interferogram from a second detector, modulating a path-length for a signal from an image associated with the first interferogram in the first detector, overlaying first data from the modulated first detector and second data from the second detector, and tracking the modulating at every point in a two dimensional detector array comprising the first detector and the second detector over a field of view for the image. The method then generates a wide-field data cube based on the overlaid first data and second data for each point. The method can generate an image from the wide-field data cube.

  2. Method, system and computer-readable media for measuring impedance of an energy storage device

    Science.gov (United States)

    Morrison, John L.; Morrison, William H.; Christophersen, Jon P.; Motloch, Chester G.

    2016-01-26

    Real-time battery impedance spectrum is acquired using a one-time record. Fast Summation Transformation (FST) is a parallel method of acquiring a real-time battery impedance spectrum using a one-time record that enables battery diagnostics. An excitation current to a battery is a sum of equal amplitude sine waves of frequencies that are octave harmonics spread over a range of interest. A sample frequency is also octave and harmonically related to all frequencies in the sum. A time profile of this sampled signal has a duration that is a few periods of the lowest frequency. A voltage response of the battery, average deleted, is an impedance of the battery in a time domain. Since the excitation frequencies are known and octave and harmonically related, a simple algorithm, FST, processes the time profile by rectifying relative to sine and cosine of each frequency. Another algorithm yields real and imaginary components for each frequency.

  3. Method of generating a computer readable model

    DEFF Research Database (Denmark)

    2008-01-01

    A method of generating a computer readable model of a geometrical object constructed from a plurality of interconnectable construction elements, wherein each construction element has a number of connection elements for connecting the construction element with another construction element. The met......A method of generating a computer readable model of a geometrical object constructed from a plurality of interconnectable construction elements, wherein each construction element has a number of connection elements for connecting the construction element with another construction element....... The method comprises encoding a first and a second one of the construction elements as corresponding data structures, each representing the connection elements of the corresponding construction element, and each of the connection elements having associated with it a predetermined connection type. The method...... further comprises determining a first connection element of the first construction element and a second connection element of the second construction element located in a predetermined proximity of each other; and retrieving connectivity information of the corresponding connection types of the first...

  4. Systems, methods and computer-readable media for modeling cell performance fade of rechargeable electrochemical devices

    Science.gov (United States)

    Gering, Kevin L

    2013-08-27

    A system includes an electrochemical cell, monitoring hardware, and a computing system. The monitoring hardware periodically samples performance characteristics of the electrochemical cell. The computing system determines cell information from the performance characteristics of the electrochemical cell. The computing system also develops a mechanistic level model of the electrochemical cell to determine performance fade characteristics of the electrochemical cell and analyzing the mechanistic level model to estimate performance fade characteristics over aging of a similar electrochemical cell. The mechanistic level model uses first constant-current pulses applied to the electrochemical cell at a first aging period and at three or more current values bracketing a first exchange current density. The mechanistic level model also is based on second constant-current pulses applied to the electrochemical cell at a second aging period and at three or more current values bracketing the second exchange current density.

  5. Systems, methods and computer-readable media to model kinetic performance of rechargeable electrochemical devices

    Science.gov (United States)

    Gering, Kevin L.

    2013-01-01

    A system includes an electrochemical cell, monitoring hardware, and a computing system. The monitoring hardware samples performance characteristics of the electrochemical cell. The computing system determines cell information from the performance characteristics. The computing system also analyzes the cell information of the electrochemical cell with a Butler-Volmer (BV) expression modified to determine exchange current density of the electrochemical cell by including kinetic performance information related to pulse-time dependence, electrode surface availability, or a combination thereof. A set of sigmoid-based expressions may be included with the modified-BV expression to determine kinetic performance as a function of pulse time. The determined exchange current density may be used with the modified-BV expression, with or without the sigmoid expressions, to analyze other characteristics of the electrochemical cell. Model parameters can be defined in terms of cell aging, making the overall kinetics model amenable to predictive estimates of cell kinetic performance along the aging timeline.

  6. Computer-readable ''Nuclear Data Sheets''

    International Nuclear Information System (INIS)

    Ewbank, W.B.

    1975-01-01

    The evaluated nuclear structure data contained in ''Nuclear Data Sheets'' are available in computer-readable form. Experimentally established properties of nuclear levels are included as well as radiations from nuclear reactions and radioactive decay. Portions of the data can be selected for distribution in several formats on magnetic tape or computer cards. A variety of different listing and drawing formats are also available. 4 figures

  7. Methods for monitoring multiple gene expression

    Energy Technology Data Exchange (ETDEWEB)

    Berka, Randy [Davis, CA; Bachkirova, Elena [Davis, CA; Rey, Michael [Davis, CA

    2012-05-01

    The present invention relates to methods for monitoring differential expression of a plurality of genes in a first filamentous fungal cell relative to expression of the same genes in one or more second filamentous fungal cells using microarrays containing Trichoderma reesei ESTs or SSH clones, or a combination thereof. The present invention also relates to computer readable media and substrates containing such array features for monitoring expression of a plurality of genes in filamentous fungal cells.

  8. Methods for monitoring multiple gene expression

    Energy Technology Data Exchange (ETDEWEB)

    Berka, Randy; Bachkirova, Elena; Rey, Michael

    2013-10-01

    The present invention relates to methods for monitoring differential expression of a plurality of genes in a first filamentous fungal cell relative to expression of the same genes in one or more second filamentous fungal cells using microarrays containing Trichoderma reesei ESTs or SSH clones, or a combination thereof. The present invention also relates to computer readable media and substrates containing such array features for monitoring expression of a plurality of genes in filamentous fungal cells.

  9. System and method for determining stability of a neural system

    Science.gov (United States)

    Curtis, Steven A. (Inventor)

    2011-01-01

    Disclosed are methods, systems, and computer-readable media for determining stability of a neural system. The method includes tracking a function world line of an N element neural system within at least one behavioral space, determining whether the tracking function world line is approaching a psychological stability surface, and implementing a quantitative solution that corrects instability if the tracked function world line is approaching the psychological stability surface.

  10. Experimental Methods in Media Research

    NARCIS (Netherlands)

    C.W. Handke (Christian); C. Herzog (Christian)

    2017-01-01

    textabstractCausal effects are a prime concern in media policy research, and experimental research designs are widely regarded as the most effective way to identify and gauge causality. Nevertheless, explicit applications of experimental methods are rare in media policy research. This chapter

  11. Methods for Analyzing Social Media

    DEFF Research Database (Denmark)

    Jensen, Jakob Linaa

    2013-01-01

    Social media is becoming increasingly attractive for users. It is a fast way to communicate ideas and a key source of information. It is therefore one of the most influential mediums of communication of our time and an important area for audience research. The growth of social media invites many...... new questions such as: How can we analyze social media? Can we use traditional audience research methods and apply them to online content? Which new research strategies have been developed? Which ethical research issues and controversies do we have to pay attention to? This book focuses on research...... strategies and methods for analyzing social media and will be of interest to researchers and practitioners using social media, as well as those wanting to keep up to date with the subject....

  12. Methods and systems for identifying ligand-protein binding sites

    KAUST Repository

    Gao, Xin; Naveed, Hammad

    2016-01-01

    The invention provides a novel integrated structure and system-based approach for drug target prediction that enables the large-scale discovery of new targets for existing drugs Novel computer-readable storage media and computer systems are also

  13. Efficient Wavefield Extrapolation In Anisotropic Media

    KAUST Repository

    Alkhalifah, Tariq; Ma, Xuxin; Waheed, Umair bin; Zuberi, Mohammad Akbar Hosain

    2014-01-01

    Various examples are provided for wavefield extrapolation in anisotropic media. In one example, among others, a method includes determining an effective isotropic velocity model and extrapolating an equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. The effective isotropic velocity model can be based upon a kinematic geometrical representation of an anisotropic, poroelastic or viscoelastic wavefield. Extrapolating the equivalent propagation can use isotopic, acoustic or elastic operators based upon the determined effective isotropic velocity model. In another example, non-transitory computer readable medium stores an application that, when executed by processing circuitry, causes the processing circuitry to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. In another example, a system includes processing circuitry and an application configured to cause the system to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield.

  14. Efficient Wavefield Extrapolation In Anisotropic Media

    KAUST Repository

    Alkhalifah, Tariq

    2014-07-03

    Various examples are provided for wavefield extrapolation in anisotropic media. In one example, among others, a method includes determining an effective isotropic velocity model and extrapolating an equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. The effective isotropic velocity model can be based upon a kinematic geometrical representation of an anisotropic, poroelastic or viscoelastic wavefield. Extrapolating the equivalent propagation can use isotopic, acoustic or elastic operators based upon the determined effective isotropic velocity model. In another example, non-transitory computer readable medium stores an application that, when executed by processing circuitry, causes the processing circuitry to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield. In another example, a system includes processing circuitry and an application configured to cause the system to determine the effective isotropic velocity model and extrapolate the equivalent propagation of an anisotropic, poroelastic or viscoelastic wavefield.

  15. Qualitative and Mixed Methods Social Media Research

    OpenAIRE

    Chareen L. Snelson

    2016-01-01

    Social media technologies have attracted substantial attention among many types of users including researchers who have published studies for several years. This article presents an overview of trends in qualitative and mixed methods social media research literature published from 2007 through 2013. A collection of 229 qualitative studies were identified through a systematic literature review process. A subset of 55 of these articles report studies involving a combination of qualitative and q...

  16. Qualitative and Mixed Methods Social Media Research

    Directory of Open Access Journals (Sweden)

    Chareen L. Snelson

    2016-02-01

    Full Text Available Social media technologies have attracted substantial attention among many types of users including researchers who have published studies for several years. This article presents an overview of trends in qualitative and mixed methods social media research literature published from 2007 through 2013. A collection of 229 qualitative studies were identified through a systematic literature review process. A subset of 55 of these articles report studies involving a combination of qualitative and quantitative methods. Articles were reviewed, analyzed, and coded through a qualitative content analysis approach. Overall trends are presented with respect to the entire collection of articles followed by an analysis of mixed methods research approaches identified in the subset of 55 studies. The most commonly used research approaches involved collecting data from people through interview, focus group, and survey methodologies. Content analysis was the second most commonly used approach whereby researchers use Facebook posts, Tweets (Twitter posts, YouTube videos, or other social media content as a data source. Many of the studies involving combinations of quantitative and qualitative data followed a design resembling Creswell and Plano Clark’s basic mixed methods typology (e.g., convergent parallel, explanatory sequential, and exploratory sequential.

  17. Method and computer program product for maintenance and modernization backlogging

    Science.gov (United States)

    Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

    2013-02-19

    According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

  18. Operationalizing Social Media: A Method For Incorporating Social Media In Department Of Defense Plans

    Science.gov (United States)

    2018-04-20

    consumer, and includes word -of- mouth or viral posts.7 However, the marketer may help generate earned media through marketing actions.8 Likewise, earned... MEDIA : A METHOD FOR INCORPORATING SOCIAL MEDIA IN DEPARTMENT OF DEFENSE 5b. GRANT NUMBER PLANS 5c. PROGRAM ELEM ENT NUMBER 6. AUTHOR(S) 5d. PROJECT... social media to influence the 2016 U.S. presidential elections demonstrated the power of social media . They also revealed that the U.S. is behind its

  19. Social media methods for studying rare diseases.

    Science.gov (United States)

    Schumacher, Kurt R; Stringer, Kathleen A; Donohue, Janet E; Yu, Sunkyung; Shaver, Ashley; Caruthers, Regine L; Zikmund-Fisher, Brian J; Fifer, Carlen; Goldberg, Caren; Russell, Mark W

    2014-05-01

    For pediatric rare diseases, the number of patients available to support traditional research methods is often inadequate. However, patients who have similar diseases cluster "virtually" online via social media. This study aimed to (1) determine whether patients who have the rare diseases Fontan-associated protein losing enteropathy (PLE) and plastic bronchitis (PB) would participate in online research, and (2) explore response patterns to examine social media's role in participation compared with other referral modalities. A novel, internet-based survey querying details of potential pathogenesis, course, and treatment of PLE and PB was created. The study was available online via web and Facebook portals for 1 year. Apart from 2 study-initiated posts on patient-run Facebook pages at the study initiation, all recruitment was driven by study respondents only. Response patterns and referral sources were tracked. A total of 671 respondents with a Fontan palliation completed a valid survey, including 76 who had PLE and 46 who had PB. Responses over time demonstrated periodic, marked increases as new online populations of Fontan patients were reached. Of the responses, 574 (86%) were from the United States and 97 (14%) were international. The leading referral sources were Facebook, internet forums, and traditional websites. Overall, social media outlets referred 84% of all responses, making it the dominant modality for recruiting the largest reported contemporary cohort of Fontan patients and patients who have PLE and PB. The methodology and response patterns from this study can be used to design research applications for other rare diseases. Copyright © 2014 by the American Academy of Pediatrics.

  20. Computer aided analysis of additional chromosome aberrations in Philadelphia chromosome positive acute lymphoblastic leukaemia using a simplified computer readable cytogenetic notation

    Directory of Open Access Journals (Sweden)

    Mohr Brigitte

    2003-01-01

    Full Text Available Abstract Background The analysis of complex cytogenetic databases of distinct leukaemia entities may help to detect rare recurring chromosome aberrations, minimal common regions of gains and losses, and also hot spots of genomic rearrangements. The patterns of the karyotype alterations may provide insights into the genetic pathways of disease progression. Results We developed a simplified computer readable cytogenetic notation (SCCN by which chromosome findings are normalised at a resolution of 400 bands. Lost or gained chromosomes or chromosome segments are specified in detail, and ranges of chromosome breakpoint assignments are recorded. Software modules were written to summarise the recorded chromosome changes with regard to the respective chromosome involvement. To assess the degree of karyotype alterations the ploidy levels and numbers of numerical and structural changes were recorded separately, and summarised in a complex karyotype aberration score (CKAS. The SCCN and CKAS were used to analyse the extend and the spectrum of additional chromosome aberrations in 94 patients with Philadelphia chromosome positive (Ph-positive acute lymphoblastic leukemia (ALL and secondary chromosome anomalies. Dosage changes of chromosomal material represented 92.1% of all additional events. Recurring regions of chromosome losses were identified. Structural rearrangements affecting (pericentromeric chromosome regions were recorded in 24.6% of the cases. Conclusions SCCN and CKAS provide unifying elements between karyotypes and computer processable data formats. They proved to be useful in the investigation of additional chromosome aberrations in Ph-positive ALL, and may represent a step towards full automation of the analysis of large and complex karyotype databases.

  1. Imaging systems and methods for obtaining and using biometric information

    Science.gov (United States)

    McMakin, Douglas L [Richland, WA; Kennedy, Mike O [Richland, WA

    2010-11-30

    Disclosed herein are exemplary embodiments of imaging systems and methods of using such systems. In one exemplary embodiment, one or more direct images of the body of a clothed subject are received, and a motion signature is determined from the one or more images. In this embodiment, the one or more images show movement of the body of the subject over time, and the motion signature is associated with the movement of the subject's body. In certain implementations, the subject can be identified based at least in part on the motion signature. Imaging systems for performing any of the disclosed methods are also disclosed herein. Furthermore, the disclosed imaging, rendering, and analysis methods can be implemented, at least in part, as one or more computer-readable media comprising computer-executable instructions for causing a computer to perform the respective methods.

  2. A Practical Method for Collecting Social Media Campaign Metrics

    Science.gov (United States)

    Gharis, Laurie W.; Hightower, Mary F.

    2017-01-01

    Today's Extension professionals are tasked with more work and fewer resources. Integrating social media campaigns into outreach efforts can be an efficient way to meet work demands. If resources go toward social media, a practical method for collecting metrics is needed. Collecting metrics adds one more task to the workloads of Extension…

  3. Media Ethnographic Methods targeting students in a technical education (Medialogy)

    DEFF Research Database (Denmark)

    Petersson, Eva; Kofoed, Lise B.

    2012-01-01

    This paper investigates the process of designing, executing and evaluating a Bachelor “soft” skills based course, Media Ethnographic Methods targeting students in a technical education (Medialogy). The course was designed as a creative workshop encouraging innovation, group dynamics...

  4. Methods and systems for identifying ligand-protein binding sites

    KAUST Repository

    Gao, Xin

    2016-05-06

    The invention provides a novel integrated structure and system-based approach for drug target prediction that enables the large-scale discovery of new targets for existing drugs Novel computer-readable storage media and computer systems are also provided. Methods and systems of the invention use novel sequence order-independent structure alignment, hierarchical clustering, and probabilistic sequence similarity techniques to construct a probabilistic pocket ensemble (PPE) that captures even promiscuous structural features of different binding sites for a drug on known targets. The drug\\'s PPE is combined with an approximation of the drug delivery profile to facilitate large-scale prediction of novel drug- protein interactions with several applications to biological research and drug development.

  5. Decentralized Cloud Method For Multicasting Media Stream

    Directory of Open Access Journals (Sweden)

    D M B N Bandara

    2015-08-01

    Full Text Available With the advancement of Information technology the concept of idea sharing has advanced. Mostly on presentations personal computer and projector have become essentials. But on most occasions for connecting these equipment cables and physical devices are used. This is inefficient and time consuming. If a problem occurs someone with technical knowledge is necessary to solve the situation. The objective of this research is to use the wireless technology to reduce the manual configuration and build up a platform where one can easily share files a visuals media and feedback. A system has been developed to detect all the devices over a network and upon granted permission will share video audio and access controls. Final outcome of the research was a collaborative software bundle which work together on a network. One part of the system is a Desktop Network Software. And other is a Mobile Application. Desktop application can detect all other devices in the network which provides the same facility and if required can allocate a group and share its screen files and have a message stream to each device using multicasting. Mobile application can act as a mobile remote to the host computer of the group which can detect any input from user and pass it to the system.

  6. Method to manufacture bit patterned magnetic recording media

    Science.gov (United States)

    Raeymaekers, Bart; Sinha, Dipen N

    2014-05-13

    A method to increase the storage density on magnetic recording media by physically separating the individual bits from each other with a non-magnetic medium (so-called bit patterned media). This allows the bits to be closely packed together without creating magnetic "cross-talk" between adjacent bits. In one embodiment, ferromagnetic particles are submerged in a resin solution, contained in a reservoir. The bottom of the reservoir is made of piezoelectric material.

  7. Solution of the porous media equation by Adomian's decomposition method

    International Nuclear Information System (INIS)

    Pamuk, Serdal

    2005-01-01

    The particular exact solutions of the porous media equation that usually occurs in nonlinear problems of heat and mass transfer, and in biological systems are obtained using Adomian's decomposition method. Also, numerical comparison of particular solutions in the decomposition method indicate that there is a very good agreement between the numerical solutions and particular exact solutions in terms of efficiency and accuracy

  8. Method for utilizing properties of the sinc(x) function for phase retrieval on nyquist-under-sampled data

    Science.gov (United States)

    Dean, Bruce H. (Inventor); Smith, Jeffrey Scott (Inventor); Aronstein, David L. (Inventor)

    2012-01-01

    Disclosed herein are systems, methods, and non-transitory computer-readable storage media for simulating propagation of an electromagnetic field, performing phase retrieval, or sampling a band-limited function. A system practicing the method generates transformed data using a discrete Fourier transform which samples a band-limited function f(x) without interpolating or modifying received data associated with the function f(x), wherein an interval between repeated copies in a periodic extension of the function f(x) obtained from the discrete Fourier transform is associated with a sampling ratio Q, defined as a ratio of a sampling frequency to a band-limited frequency, and wherein Q is assigned a value between 1 and 2 such that substantially no aliasing occurs in the transformed data, and retrieves a phase in the received data based on the transformed data, wherein the phase is used as feedback to an optical system.

  9. Lattice gas methods for predicting intrinsic permeability of porous media

    Energy Technology Data Exchange (ETDEWEB)

    Santos, L.O.E.; Philippi, P.C. [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica. Lab. de Propriedades Termofisicas e Meios Porosos)]. E-mail: emerich@lmpt.ufsc.br; philippi@lmpt.ufsc.br; Damiani, M.C. [Engineering Simulation and Scientific Software (ESSS), Florianopolis, SC (Brazil). Parque Tecnologico]. E-mail: damiani@lmpt.ufsc.br

    2000-07-01

    This paper presents a method for predicting intrinsic permeability of porous media based on Lattice Gas Cellular Automata methods. Two methods are presented. The first is based on a Boolean model (LGA). The second is Boltzmann method (LB) based on Boltzmann relaxation equation. LGA is a relatively recent method developed to perform hydrodynamic calculations. The method, in its simplest form, consists of a regular lattice populated with particles that hop from site to site in discrete time steps in a process, called propagation. After propagation, the particles in each site interact with each other in a process called collision, in which the number of particles and momentum are conserved. An exclusion principle is imposed in order to achieve better computational efficiency. In despite of its simplicity, this model evolves in agreement with Navier-Stokes equation for low Mach numbers. LB methods were recently developed for the numerical integration of the Navier-Stokes equation based on discrete Boltzmann transport equation. Derived from LGA, LB is a powerful alternative to the standard methods in computational fluid dynamics. In recent years, it has received much attention and has been used in several applications like simulations of flows through porous media, turbulent flows and multiphase flows. It is important to emphasize some aspects that make Lattice Gas Cellular Automata methods very attractive for simulating flows through porous media. In fact, boundary conditions in flows through complex geometry structures are very easy to describe in simulations using these methods. In LGA methods simulations are performed with integers needing less resident memory capability and boolean arithmetic reduces running time. The two methods are used to simulate flows through several Brazilian reservoir petroleum rocks leading to intrinsic permeability prediction. Simulation is compared with experimental results. (author)

  10. Methods of producing adsorption media including a metal oxide

    Science.gov (United States)

    Mann, Nicholas R; Tranter, Troy J

    2014-03-04

    Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

  11. SOCIOLOGICAL MEDIA: MAXIMIZING STUDENT INTEREST IN QUANTITATIVE METHODS VIA COLLABORATIVE USE OF DIGITAL MEDIA

    Directory of Open Access Journals (Sweden)

    Frederick T. Tucker

    2016-10-01

    Full Text Available College sociology lecturers are tasked with inspiring student interest in quantitative methods despite widespread student anxiety about the subject, and a tendency for students to relieve classroom anxiety through habitual web browsing. In this paper, the author details the results of a pedagogical program whereby students at a New York City community college used industry-standard software to design, conduct, and analyze sociological surveys of one another, with the aim of inspiring student interest in quantitative methods and enhancing technical literacy. A chi-square test of independence was performed to determine the effect of the pedagogical process on the students’ ability to discuss sociological methods unrelated to their surveys in their final papers, compared with the author’s students from the previous semester who did not undergo the pedagogical program. The relation between these variables was significant, χ 2(3, N=36 = 9.8, p = .02. Findings suggest that community college students, under lecturer supervision, with minimal prior statistical knowledge, and access to digital media can collaborate in small groups to create and conduct sociological surveys, and discuss methods and results in limited classroom time. College sociology lecturers, instead of combatting student desire to use digital media, should harness this desire to advance student mastery of quantitative methods.

  12. Composite media for fluid stream processing, a method of forming the composite media, and a related method of processing a fluid stream

    Science.gov (United States)

    Garn, Troy G; Law, Jack D; Greenhalgh, Mitchell R; Tranter, Rhonda

    2014-04-01

    A composite media including at least one crystalline aluminosilicate material in polyacrylonitrile. A method of forming a composite media is also disclosed. The method comprises dissolving polyacrylonitrile in an organic solvent to form a matrix solution. At least one crystalline aluminosilicate material is combined with the matrix solution to form a composite media solution. The organic solvent present in the composite media solution is diluted. The composite media solution is solidified. In addition, a method of processing a fluid stream is disclosed. The method comprises providing a beads of a composite media comprising at least one crystalline aluminosilicate material dispersed in a polyacrylonitrile matrix. The beads of the composite media are contacted with a fluid stream comprising at least one constituent. The at least one constituent is substantially removed from the fluid stream.

  13. A method for the investigation of cholegraphic contrast media

    International Nuclear Information System (INIS)

    Otto, H.

    1982-01-01

    Isolated perfused rat livers were used for investigating possible interactions between two simultaneously injected contrast media, and which technique, using parenteral application of cholegraphic media, is optimal. The results show that excretion of a parenteral contrast medium is reduced by giving an oral contrast medium at the same time. Simultaneous administration of two different contrast media therefore does not result in improved diagnostic information. The effect depends on the dose, and a sufficiently long interval should be observed between giving an oral and a parenteral contrast medium. A comparison of excretion values following injection of a bolus and prolonged infusion shows higher biliary contrast concentration and increased excretion after a single injection. Comparing only the period after the infusion, no difference was found between these two methods of administration. The single injection offers pharmacokinetic advantages, but an infusion is better tolerated and has fewer side effects. A rapid infusion of 10 to 15 minutes is therefore recommended as the optimal means of administration. (orig.) [de

  14. A new method for dosing uranium in biological media

    International Nuclear Information System (INIS)

    Henry, Ph.; Kobisch, Ch.

    1964-01-01

    This report describes a new method for dosing uranium in biological media based on measurement of alpha activity. After treatment of the sample with a mineral acid, the uranium is reduced to the valency four by trivalent titanium and is precipitated as phosphate in acid solution. The uranium is then separated from the titanium by precipitation as UF 4 with lanthanum as carrier. A slight modification, unnecessary in the case of routine analyses, makes it possible to eliminate other possible alpha emitters (thorium and transuranic elements). (authors) [fr

  15. Numerical Methods for Forward and Inverse Problems in Discontinuous Media

    Energy Technology Data Exchange (ETDEWEB)

    Chartier, Timothy P.

    2011-03-08

    The research emphasis under this grant's funding is in the area of algebraic multigrid methods. The research has two main branches: 1) exploring interdisciplinary applications in which algebraic multigrid can make an impact and 2) extending the scope of algebraic multigrid methods with algorithmic improvements that are based in strong analysis.The work in interdisciplinary applications falls primarily in the field of biomedical imaging. Work under this grant demonstrated the effectiveness and robustness of multigrid for solving linear systems that result from highly heterogeneous finite element method models of the human head. The results in this work also give promise to medical advances possible with software that may be developed. Research to extend the scope of algebraic multigrid has been focused in several areas. In collaboration with researchers at the University of Colorado, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory, the PI developed an adaptive multigrid with subcycling via complementary grids. This method has very cheap computing costs per iterate and is showing promise as a preconditioner for conjugate gradient. Recent work with Los Alamos National Laboratory concentrates on developing algorithms that take advantage of the recent advances in adaptive multigrid research. The results of the various efforts in this research could ultimately have direct use and impact to researchers for a wide variety of applications, including, astrophysics, neuroscience, contaminant transport in porous media, bi-domain heart modeling, modeling of tumor growth, and flow in heterogeneous porous media. This work has already led to basic advances in computational mathematics and numerical linear algebra and will continue to do so into the future.

  16. Method for the measurement of media player use

    Science.gov (United States)

    Webb, Graham

    There has been ongoing concern that prolonged use of MP3 players can lead to noise-induced hearing loss. Acoustic exposure is the product of intensity and duration of exposure. Previous work has utilised measurements of maximum headphone output and output during listening tests to determine acoustic intensity; whilst duration of use is currently assessed with questionnaires and interviews. The subjective nature of these latter methods has led to a wide variation in figures for device use, restricting the scope of media player risk assessment. A need was therefore identified for an improved method of acquiring data of users' listening habits. This need was addressed with the design of a new data-logging device that discretely measures voltage output from the media player, whilst in use. A calibration method is proposed to implement the headphone transfer function into the data-logger, to relate output voltage to exposed pressure. It is proposed that the headphone transfer function is measured using an acoustic manikin, representative of the population of interest. The real ear measurement is put forward as an appropriate tool for validating results gained using this approach. A data-logger was designed and a proof of concept has been demonstrated in a software program written for this purpose. The proposed method has the advantages that an objective measurement can be made of the user's natural listening habits, over a long period of time, with a resolution comparable to personal acoustic dosimetry. A number of practical steps are required to further this work before data can be collected. A software graphic equaliser was used to implement the transfer function, but the chosen filter topology gave an unsatisfactory response, an investigation is required for further work. The device requires migration to hardware and the experimental calibration and validation of the system are also required. The worldwide population of MP3 player users is in the region of hundreds

  17. Research on Visualization Design Method in the Field of New Media Software Engineering

    Science.gov (United States)

    Deqiang, Hu

    2018-03-01

    In the new period of increasingly developed science and technology, with the increasingly fierce competition in the market and the increasing demand of the masses, new design and application methods have emerged in the field of new media software engineering, that is, the visualization design method. Applying the visualization design method to the field of new media software engineering can not only improve the actual operation efficiency of new media software engineering but more importantly the quality of software development can be enhanced by means of certain media of communication and transformation; on this basis, the progress and development of new media software engineering in China are also continuously promoted. Therefore, the application of visualization design method in the field of new media software engineering is analysed concretely in this article from the perspective of the overview of visualization design methods and on the basis of systematic analysis of the basic technology.

  18. Stencil method: a Markov model for transport in porous media

    Science.gov (United States)

    Delgoshaie, A. H.; Tchelepi, H.; Jenny, P.

    2016-12-01

    In porous media the transport of fluid is dominated by flow-field heterogeneity resulting from the underlying transmissibility field. Since the transmissibility is highly uncertain, many realizations of a geological model are used to describe the statistics of the transport phenomena in a Monte Carlo framework. One possible way to avoid the high computational cost of physics-based Monte Carlo simulations is to model the velocity field as a Markov process and use Markov Chain Monte Carlo. In previous works multiple Markov models for discrete velocity processes have been proposed. These models can be divided into two general classes of Markov models in time and Markov models in space. Both of these choices have been shown to be effective to some extent. However some studies have suggested that the Markov property cannot be confirmed for a temporal Markov process; Therefore there is not a consensus about the validity and value of Markov models in time. Moreover, previous spacial Markov models have only been used for modeling transport on structured networks and can not be readily applied to model transport in unstructured networks. In this work we propose a novel approach for constructing a Markov model in time (stencil method) for a discrete velocity process. The results form the stencil method are compared to previously proposed spacial Markov models for structured networks. The stencil method is also applied to unstructured networks and can successfully describe the dispersion of particles in this setting. Our conclusion is that both temporal Markov models and spacial Markov models for discrete velocity processes can be valid for a range of model parameters. Moreover, we show that the stencil model can be more efficient in many practical settings and is suited to model dispersion both on structured and unstructured networks.

  19. Obesity in social media: a mixed methods analysis.

    Science.gov (United States)

    Chou, Wen-Ying Sylvia; Prestin, Abby; Kunath, Stephen

    2014-09-01

    The escalating obesity rate in the USA has made obesity prevention a top public health priority. Recent interventions have tapped into the social media (SM) landscape. To leverage SM in obesity prevention, we must understand user-generated discourse surrounding the topic. This study was conducted to describe SM interactions about weight through a mixed methods analysis. Data were collected across 60 days through SM monitoring services, yielding 2.2 million posts. Data were cleaned and coded through Natural Language Processing (NLP) techniques, yielding popular themes and the most retweeted content. Qualitative analyses of selected posts add insight into the nature of the public dialogue and motivations for participation. Twitter represented the most common channel. Twitter and Facebook were dominated by derogatory and misogynist sentiment, pointing to weight stigmatization, whereas blogs and forums contained more nuanced comments. Other themes included humor, education, and positive sentiment countering weight-based stereotypes. This study documented weight-related attitudes and perceptions. This knowledge will inform public health/obesity prevention practice.

  20. Study of methods for the improvement of bacterial transport media

    Science.gov (United States)

    Gardner, R. L.; Beakley, J. W.

    1973-01-01

    A series of 500 transport media recipes was tested for ability to hold pure cultures of Streptococcus equisimilus, Corynebacterium equi, Neisseria perflava, and Haemophilus parainfluenzae for 21 days. Stuart Medium Base with 0.4% agar was used as the control medium for this and the other experiments in the investigation. At the end of the holding period inoculated transport media were quantitatively assayed, and the control media were assayed immediately after inoculation. Three vials of each medium were inoculated with an organism, and each vial's medium was diluted and spread on duplicate plates. Assay media for this experiment included Brain Heart Infusion,(BHIA) Tryptic Soy Agar, and BHIA with 1% Isovitalex enrichment.

  1. Social and online media research – data, metrics and methods

    OpenAIRE

    Georgeta Drula

    2012-01-01

    Studies and current researches in online digital media and communication science are related to Web 2.0 at least from two perspectives: either to better understand this medium as research object, or to collect data on different topics. Social media can be a tremendous data source and topics for researchers. At the same time, these data are found in multimedia formats on different platforms, are updated continuously, and could be posted by professionals or users. This situation requires differ...

  2. Comparison of Fluorescence Microscopy and Different Growth Media Culture Methods for Acanthamoeba Keratitis Diagnosis.

    Science.gov (United States)

    Peretz, Avi; Geffen, Yuval; Socea, Soergiu D; Pastukh, Nina; Graffi, Shmuel

    2015-08-01

    Acanthamoeba keratitis (AK), a potentially blinding infection of the cornea, is caused by a free-living protozoan. Culture and microscopic examination of corneal scraping tissue material is the conventional method for identifying Acanthamoeba. In this article, we compared several methods for AK diagnosis of 32 patients: microscopic examination using fluorescent dye, specific culture on growth media-non-nutrient agar (NNA), culture on liquid growth media-peptone yeast glucose (PYG), and TYI-S-33. AK was found in 14 patients. Thirteen of the specimens were found AK positive by fluorescence microscopic examination, 11 specimens were found AK positive on PYG growth media, and 9 specimens were found AK positive on TYI-S-33 growth media. Only five specimens were found AK positive on NNA growth media. Therefore, we recommend using fluorescence microscopy technique and culture method, especially PYG liquid media. © The American Society of Tropical Medicine and Hygiene.

  3. An efficient wave extrapolation method for anisotropic media with tilt

    KAUST Repository

    Waheed, Umair bin

    2015-03-23

    Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source-dependent effective velocities for the elliptic medium using kinematic high-frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade-off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear-wave artefacts as opposed to the conventional finite-difference-based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models.

  4. An efficient wave extrapolation method for anisotropic media with tilt

    KAUST Repository

    Waheed, Umair bin; Alkhalifah, Tariq Ali

    2015-01-01

    Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source-dependent effective velocities for the elliptic medium using kinematic high-frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade-off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear-wave artefacts as opposed to the conventional finite-difference-based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models.

  5. A fluorescence anisotropy method for measuring protein concentration in complex cell culture media.

    Science.gov (United States)

    Groza, Radu Constantin; Calvet, Amandine; Ryder, Alan G

    2014-04-22

    The rapid, quantitative analysis of the complex cell culture media used in biopharmaceutical manufacturing is of critical importance. Requirements for cell culture media composition profiling, or changes in specific analyte concentrations (e.g. amino acids in the media or product protein in the bioprocess broth) often necessitate the use of complicated analytical methods and extensive sample handling. Rapid spectroscopic methods like multi-dimensional fluorescence (MDF) spectroscopy have been successfully applied for the routine determination of compositional changes in cell culture media and bioprocess broths. Quantifying macromolecules in cell culture media is a specific challenge as there is a need to implement measurements rapidly on the prepared media. However, the use of standard fluorescence spectroscopy is complicated by the emission overlap from many media components. Here, we demonstrate how combining anisotropy measurements with standard total synchronous fluorescence spectroscopy (TSFS) provides a rapid, accurate quantitation method for cell culture media. Anisotropy provides emission resolution between large and small fluorophores while TSFS provides a robust measurement space. Model cell culture media was prepared using yeastolate (2.5 mg mL(-1)) spiked with bovine serum albumin (0 to 5 mg mL(-1)). Using this method, protein emission is clearly discriminated from background yeastolate emission, allowing for accurate bovine serum albumin (BSA) quantification over a 0.1 to 4.0 mg mL(-1) range with a limit of detection (LOD) of 13.8 μg mL(-1). Copyright © 2014. Published by Elsevier B.V.

  6. PFAS methods and guidance for sampling and analyzing water and other environmental media (Technical Brief)

    Science.gov (United States)

    EPA's methods for analyzing PFAS in environmental media are in various stages of development. This fact sheet summarizes EPA's analytical methods development for groundwater, surface water, wastewater, and solids, including soils, sediments, and biosolids

  7. Social Media Storytelling as a Method for Teaching Literature

    DEFF Research Database (Denmark)

    Pajares Tosca, Susana; Nørgaard Isholdt, Anne Katrine; Tarp-Petzke, Niklas

    2016-01-01

    This chapter investigates how a social medium (Facebook in this case) can be a platform for a novel way of teaching literature focusing on social roleplaying of the literary characters. We call this new form “social media storytelling”. Our project transmedially recreates the world of an original...

  8. Multilayer bimetallic media as protection method of radioactive radiation

    International Nuclear Information System (INIS)

    Borts, B.V.; Tkachenko, V.I.; Tkachenko, I.V.

    2010-01-01

    Multilayer bimetallic media as means of protection of the earth's space vehicle from radioactive space radiation is described in the proposed paper. Evaluation of radiation losses of electron energy in inhomogeneous media is carried out; these media may be formed by layers of materials with different dielectric constants or they may be simulated by dielectric permittivity varying in space by harmonic law. It is shown that in such media the radiation losses of electron are proportional to the square of parameter of inhomogeneity, that is the losses are low. In the case when in periodic laminar medium with sharp boundaries the conditions of parametric union of self-waves of medium are satisfied, the losses of electron are proportional to the inhomogeneity parameter to first power and are comparable with losses that are caused by elementary events of scattering. The mean length of radiation losses of electron with energy 2(6) MeV in multilayer bimetallic medium tungsten-aluminum with period L ∼ 0,3 ·10 -6 cm is comparable with mean path of electron in such medium. The characteristic angles of radiation have the discrete character and are directed from 0 to 180 degree C. The power of losses increases with the radiation angle increase and is maximal for characteristic angles approaching 90 degree C.

  9. Total Quality Management and Media Services: The Deming Method.

    Science.gov (United States)

    Richie, Mark L.

    1992-01-01

    W. Edwards Deming built a 40-year record of quality management in Japan known as Total Quality Management (TQM). His 14 points require a change in the belief system of managers and media directors, but their implementation in government agencies and schools will produce increased time for better services, better communications, and new programs.…

  10. Following User Pathways: Cross Platform and Mixed Methods Analysis in Social Media Studies

    DEFF Research Database (Denmark)

    Hall, Margeret; Mazarakis, Athanasios; Peters, Isabella

    2016-01-01

    is the mixed method approach (e.g. qualitative and quantitative methods) in order to better understand how users and society interacts online. The workshop 'Following User Pathways' brings together a community of researchers and professionals to address methodological, analytical, conceptual, and technological......Social media and the resulting tidal wave of available data have changed the ways and methods researchers analyze communities at scale. But the full potential for social scientists (and others) is not yet achieved. Despite the popularity of social media analysis in the past decade, few researchers...... challenges and opportunities of cross-platform, mixed method analysis in social media ecosystems....

  11. Ethics, methods and diversity in the use of new media

    Directory of Open Access Journals (Sweden)

    Yngve Nordkvelle

    2015-11-01

    Full Text Available Yngve NordkvelleThis issue presents six papers covering a wide range of topics. It demonstrates how varied and encompassing the research in these matters are. Our authors this time come from Mexico, Germany, Sweden, Austria, Finland, Norway and the UK. The topics in this issue range from how students use the Internet in such diverse countries as Mexico and Finland, and we also offer an analysis the effect on one computer per students has in Swedish secondary schools. The language used on digital publishing contexts is an important topic covered in a politically inspired article. Three articles have a more methodological interest: two of them are about the ethnographies of communities of learning, and about teachers using videos in their professional development. The last one is about ethical matters, a topic all too seldom covered in publications about new media and Internet. The wider context is the use of digital storytelling with groups of people who need particular protection because they may be more vulnerable, due to a health condition.Pip Hardy is a co-founder of “The Patient Voices Programme” and has since 2003 provided opportunities for new ways of expressing problems related to health through new digital media. Digital Storytelling is a successful method for making people express their ideas and emotions about health matters. Her paper “First do no harm: developing an ethical process of consent and release for digital storytelling in healthcare” explains how the process of caring and protecting participants through the process of producing and sharing their results. The activity of the programme is directed towards health practitioners as well as patients and their families. In her PhD-project at Manchester Metropolitan University, she also elaborates and refines the strategies for the protection of patients rights and ownership to their own stories.The paper describes how that process has been developed and explores the issues

  12. Teaching Media and Methods in Marketing: European and North American Universities

    Science.gov (United States)

    Vila, Natalia; Kuster, Ines

    2009-01-01

    This article aims to examine the most widely used teaching media and methods in university education. To achieve this objective, international research has been carried out among 135 marketing teachers from North American and European universities. The study shows that North American teachers use more traditional media and participatory methods…

  13. Measurements of linear attenuation coefficients of irregular shaped samples by two media method

    International Nuclear Information System (INIS)

    Singh, Sukhpal; Kumar, Ashok; Thind, Kulwant Singh; Mudahar, Gurmel S.

    2008-01-01

    The linear attenuation coefficient values of regular and irregular shaped flyash materials have been measured without knowing the thickness of a sample using a new technique namely 'two media method'. These values have also been measured with a standard gamma ray transmission method and obtained theoretically with winXCOM computer code. From the comparison it is reported that the two media method has given accurate results of attenuation coefficients of flyash materials

  14. The method of lines solution of discrete ordinates method for non-grey media

    International Nuclear Information System (INIS)

    Cayan, Fatma Nihan; Selcuk, Nevin

    2007-01-01

    A radiation code based on method of lines (MOL) solution of discrete ordinates method (DOM) for radiative heat transfer in non-grey absorbing-emitting media was developed by incorporation of a gas spectral radiative property model, namely wide band correlated-k (WBCK) model, which is compatible with MOL solution of DOM. Predictive accuracy of the code was evaluated by applying it to 1-D parallel plate and 2-D axisymmetric cylindrical enclosure problems containing absorbing-emitting medium and benchmarking its predictions against line-by-line solutions available in the literature. Comparisons reveal that MOL solution of DOM with WBCK model produces accurate results for radiative heat fluxes and source terms and can be used with confidence in conjunction with computational fluid dynamics codes based on the same approach

  15. A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

    KAUST Repository

    Gao, Kai; Chung, Eric T.; Gibson, Richard L.; Fu, Shubin; Efendiev, Yalchin R.

    2015-01-01

    The development of reliable methods for upscaling fine-scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters

  16. A generalized multiscale finite element method for elastic wave propagation in fractured media

    KAUST Repository

    Chung, Eric T.

    2016-02-26

    In this paper, we consider elastic wave propagation in fractured media applying a linear-slip model to represent the effects of fractures on the wavefield. Fractured media, typically, are highly heterogeneous due to multiple length scales. Direct numerical simulations for wave propagation in highly heterogeneous fractured media can be computationally expensive and require some type of model reduction. We develop a multiscale model reduction technique that captures the complex nature of the media (heterogeneities and fractures) in the coarse scale system. The proposed method is based on the generalized multiscale finite element method, where the multiscale basis functions are constructed to capture the fine-scale information of the heterogeneous, fractured media and effectively reduce the degrees of freedom. These multiscale basis functions are coupled via the interior penalty discontinuous Galerkin method, which provides a block-diagonal mass matrix. The latter is needed for fast computation in an explicit time discretization, which is used in our simulations. Numerical results are presented to show the performance of the presented multiscale method for fractured media. We consider several cases where fractured media contain fractures of multiple lengths. Our numerical results show that the proposed reduced-order models can provide accurate approximations for the fine-scale solution.

  17. A generalized multiscale finite element method for elastic wave propagation in fractured media

    KAUST Repository

    Chung, Eric T.; Efendiev, Yalchin R.; Gibson, Richard L.; Vasilyeva, Maria

    2016-01-01

    In this paper, we consider elastic wave propagation in fractured media applying a linear-slip model to represent the effects of fractures on the wavefield. Fractured media, typically, are highly heterogeneous due to multiple length scales. Direct numerical simulations for wave propagation in highly heterogeneous fractured media can be computationally expensive and require some type of model reduction. We develop a multiscale model reduction technique that captures the complex nature of the media (heterogeneities and fractures) in the coarse scale system. The proposed method is based on the generalized multiscale finite element method, where the multiscale basis functions are constructed to capture the fine-scale information of the heterogeneous, fractured media and effectively reduce the degrees of freedom. These multiscale basis functions are coupled via the interior penalty discontinuous Galerkin method, which provides a block-diagonal mass matrix. The latter is needed for fast computation in an explicit time discretization, which is used in our simulations. Numerical results are presented to show the performance of the presented multiscale method for fractured media. We consider several cases where fractured media contain fractures of multiple lengths. Our numerical results show that the proposed reduced-order models can provide accurate approximations for the fine-scale solution.

  18. System and method for embedding emotion in logic systems

    Science.gov (United States)

    Curtis, Steven A. (Inventor)

    2012-01-01

    A system, method, and computer readable-media for creating a stable synthetic neural system. The method includes training an intellectual choice-driven synthetic neural system (SNS), training an emotional rule-driven SNS by generating emotions from rules, incorporating the rule-driven SNS into the choice-driven SNS through an evolvable interface, and balancing the emotional SNS and the intellectual SNS to achieve stability in a nontrivial autonomous environment with a Stability Algorithm for Neural Entities (SANE). Generating emotions from rules can include coding the rules into the rule-driven SNS in a self-consistent way. Training the emotional rule-driven SNS can occur during a training stage in parallel with training the choice-driven SNS. The training stage can include a self assessment loop which measures performance characteristics of the rule-driven SNS against core genetic code. The method uses a stability threshold to measure stability of the incorporated rule-driven SNS and choice-driven SNS using SANE.

  19. Methods for extracting climate indicator data from social media.

    Science.gov (United States)

    Fuka, M. Z.; Fuka, D. R.

    2011-12-01

    This paper shows how we've used the R software suite to extract climate indicator data from Twitter. In the course of this research we've collected extensive data sets of unsolicited observations ("tweets") for hundreds of climate-related phenological, biological, epidemiological and meteorological effects. R has proved itself in our work as a useful tool for manipulating those large data sets. Our experience from this effort has yielded a variety of insights on using R to extract geophysics-specific information from publicly accessible social media sources. We illustrate our methodology by mapping tweeted US armadillo sightings to explore the impact of climate variability on the extent of the animal's range. This example usefully demonstrates R's technical capabilities in collecting, time-stamping, geolocating, analyzing, visualizing and otherwise processing climate-related data derived from unsolicited social media postings. We also "mash-up" the data sets with those acquired by more traditional means, for example, temperature and precipitation data across the armadillo's US range. Our data-handling practice is extendable to social sharing services other than Twitter, providing the environmental modeling community an opportunity to access largely untapped resources of non-traditional climate indicator data to better understand the effects of climate change at local, regional and global scales.

  20. Methods to Enrich Exosomes from Conditioned Media and Biological Fluids.

    Science.gov (United States)

    Sharma, Shayna; Scholz-Romero, Katherin; Rice, Gregory E; Salomon, Carlos

    2018-01-01

    Exosomes are nano-vesicles which can transport a range of molecules including but not limited to proteins and miRNA. This ability of exosomes renders them useful in cellular communication often resulting in biological changes. They have several functions in facilitating normal biological processes such as immune responses and an involvement in pregnancy. However, they have also been linked to pathological conditions including cancer and pregnancy complications such as preeclampsia. An understanding for the role of exosomes in preeclampsia is based on the ability to purify and characterize exosomes. There have been several techniques proposed for the enrichment of exosomes such as ultracentrifugation, density gradient separation, and ultrafiltration although there is no widely accepted optimized technique. Here we describe a workflow for isolating exosomes from cell-conditioned media and biological fluids using a combination of centrifugation, buoyant density, and ultrafiltration approaches.

  1. Method for linking a media work to perform an action, involves linking an electronic media work with a reference electronic media work identifier associated with a reference electronic media work using an approximate neighbor search

    DEFF Research Database (Denmark)

    2016-01-01

    A computer-implemented method including the steps of: receiving, by a computer system including at least one computer, a media work uploaded from a first electronic device; receiving, by the computer system from a second electronic device, a tag associated with the media work having a media work...... identifier; storing, by the computer system, the media work identifier and the associated tag; obtaining, by the computer system from a third electronic device, a query related to the associated tag; correlating, by the computer system, the query with associated information related to an action...... to be performed; and providing, from the computer system to the third electronic device, the associated information to be used in performing the action....

  2. Projection methods for line radiative transfer in spherical media.

    Science.gov (United States)

    Anusha, L. S.; Nagendra, K. N.

    An efficient numerical method called the Preconditioned Bi-Conjugate Gradient (Pre-BiCG) method is presented for the solution of radiative transfer equation in spherical geometry. A variant of this method called Stabilized Preconditioned Bi-Conjugate Gradient (Pre-BiCG-STAB) is also presented. These methods are based on projections on the subspaces of the n dimensional Euclidean space mathbb {R}n called Krylov subspaces. The methods are shown to be faster in terms of convergence rate compared to the contemporary iterative methods such as Jacobi, Gauss-Seidel and Successive Over Relaxation (SOR).

  3. A universal laboratory method for determining physical parameters of radon migration in dry granulated porous media.

    Science.gov (United States)

    Ye, Yong-Jun; Zhang, Yun-Feng; Dai, Xin-Tao; Ding, De-Xin

    2017-10-01

    The particle size and heaped methods of exhalation media have important effects on physical parameters, such as the free radon production rate, porosity, permeability, and radon diffusion coefficient. However, existing methods for determining those parameters are too complex, and time-consuming. In this study, a novel, systematic determining method was proposed based on nuclide decay, radon diffusion migration theory, and the mass conservation law, and an associated experimental device was designed and manufactured. The parameters of uranium ore heap and sandy soil of radon diffusion coefficient (D), free radon production rate (α), media permeability (k), and porosity (ε) were obtained. At the same time, the practicality of the novel determining method was improved over other methods, with the results showing that accuracy was within the acceptable range of experimental error. This novel method will be of significance for the study of radon migration and exhalation in granulated porous media. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Health-Related Disaster Communication and Social Media: Mixed-Method Systematic Review.

    Science.gov (United States)

    Eckert, Stine; Sopory, Pradeep; Day, Ashleigh; Wilkins, Lee; Padgett, Donyale; Novak, Julie; Noyes, Jane; Allen, Tomas; Alexander, Nyka; Vanderford, Marsha; Gamhewage, Gaya

    2017-08-21

    This mixed-method evidence synthesis drew on Cochrane methods and principles to systematically review literature published between 2003 and 2016 on the best social media practices to promote health protection and dispel misinformation during disasters. Seventy-nine studies employing quantitative, qualitative, and mixed methods on risk communication during disasters in all UN-languages were reviewed, finding that agencies need to contextualize the use of social media for particular populations and crises. Social media are tools that still have not become routine practices in many governmental agencies regarding public health in the countries studied. Social media, especially Twitter and Facebook (and equivalents in countries such as China), need to be incorporated into daily operations of governmental agencies and implementing partners to build familiarity with them before health-related crises happen. This was especially observed in U.S. agencies, local government, and first responders but also for city governments and school administrations in Europe. For those that do use social media during health-related risk communication, studies find that public relations officers, governmental agencies, and the general public have used social media successfully to spread truthful information and to verify information to dispel rumors during disasters. Few studies focused on the recovery and preparation phases and on countries in the Southern hemisphere, except for Australia. The vast majority of studies did not analyze the demographics of social media users beyond their geographic location, their status of being inside/outside the disaster zone; and their frequency and content of posting. Socioeconomic demographics were not collected and/or analyzed to drill deeper into the implications of using social media to reach vulnerable populations. Who exactly is reached via social media campaigns and who needs to be reached with other means has remained an understudied area.

  5. Adaptive moving grid methods for two-phase flow in porous media

    KAUST Repository

    Dong, Hao; Qiao, Zhonghua; Sun, Shuyu; Tang, Tao

    2014-01-01

    In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can

  6. Techno-experiential design assessment and media experience database: A method for emerging technology assessment

    OpenAIRE

    Schick, Dan

    2005-01-01

    This thesis evaluates the Techno-Experiential Design Assessment (TEDA) for social research on new media and emerging technology. Dr. Roman Onufrijchuk developed TEDA to address the shortcomings of current methods designed for studying existing technologies. Drawing from the ideas of Canadian media theorist Marshall McLuhan, TEDA focuses on the environmental changes introduced by a new technology into a user's life. I describe the key components of the TEDA methodology and provide examples of ...

  7. #JeSuisCharlie: Towards a Multi-Method Study of Hybrid Media Events

    Directory of Open Access Journals (Sweden)

    Johanna Sumiala

    2016-10-01

    Full Text Available This article suggests a new methodological model for the study of hybrid media events with global appeal. This model, developed in the project on the 2015 Charlie Hebdo attacks in Paris, was created specifically for researching digital media—and in particular, Twitter. The article is structured as follows. Firstly, the methodological scope is discussed against the theoretical context, e.g. the theory of media events. In the theoretical discussion, special emphasis is given to i disruptive, upsetting, or disintegrative media events and hybrid media events and ii the conditions of today’s heterogeneous and globalised media communication landscape. Secondly, the article introduces a multi-method approach developed for the analysis of hybrid media events. In this model, computational social science—namely, automated content analysis (ACA and social network analytics (SNA—are combined with a qualitative approach—specifically, digital ethnography. The article outlines three key phases for research in which the interplay between quantitative and qualitative approaches is played out. In the first phase, preliminary digital ethnography is applied to provide the outline of the event. In the second phase, quantitative social network analytics are applied to construct the digital field for research. In this phase, it is necessary to map a what is circulating on the websites and b where this circulation takes place. The third and final phase applies a qualitative approach and digital ethnography to provide a more nuanced, in-depth interpretation of what (substance/content is circulating and how this material connects with the ‘where’ in the digital landscape, hence constituting links and connections in the hybrid media landscape. In conclusion, the article reflects on how this multi-method approach contributes to understanding the workings of today’s hybrid media events: how they create and maintain symbolic battles over certain imagined

  8. Alternative methods for ray tracing in uniaxial media. Application to negative refraction

    Science.gov (United States)

    Bellver-Cebreros, Consuelo; Rodriguez-Danta, Marcelo

    2007-03-01

    In previous papers [C. Bellver-Cebreros, M. Rodriguez-Danta, Eikonal equation, alternative expression of Fresnel's equation and Mohr's construction in optical anisotropic media, Opt. Commun. 189 (2001) 193; C. Bellver-Cebreros, M. Rodriguez-Danta, Internal conical refraction in biaxial media and graphical plane constructions deduced from Mohr's method, Opt. Commun. 212 (2002) 199; C. Bellver-Cebreros, M. Rodriguez-Danta, Refraccion conica externa en medios biaxicos a partir de la construccion de Mohr, Opt. Pura AppliE 36 (2003) 33], the authors have developed a method based on the local properties of dielectric permittivity tensor and on Mohr's plane graphical construction in order to study the behaviour of locally plane light waves in anisotropic media. In this paper, this alternative methodology is compared with the traditional one, by emphasizing the simplicity of the former when studying ray propagation through uniaxial media (comparison is possible since, in this case, traditional construction becomes also plane). An original and simple graphical method is proposed in order to determine the direction of propagation given by the wave vector from the knowledge of the extraordinary ray direction (given by Poynting vector). Some properties of light rays in these media not described in the literature are obtained. Finally, two applications are considered: a description of optical birefringence under normal incidence and the study of negative refraction in uniaxial media.

  9. An improved intermediate resonance method for heterogeneous media

    International Nuclear Information System (INIS)

    Chiovato, O.; Corno, S.; Pasquantonio, F.Di.

    1977-01-01

    A new formulation is described of the Intermediate Resonance method which incorporates the previous developments suitably modified and improved, together with some new contributions. The 'intermediate' character is directly introduced in the integral operator K, allowing a more rigorous deduction of the equations for evaluating the intermediate parameters related to the nuclides involved in the system. There is no limit to the number of internal (admixed in the fuel) and external moderators. The capability to take into account the interference scattering has been extended to heterogeneous systems. The Doppler broadening is described by means of new accurate rational approximations to the broadened line shape psi. Finally the use of energy mean values suitably defined refines the values of the resonance integrals and resonance absorption cross sections. The Intermediate Resonance method so extended and improved, has been coded in a group of FORTRAN routines, which have been inserted as a calculation option in the fast section of the GGC code for the evaluation of multigroup cross sections. A series of calculations has been carried out, using these routines, and comparisons have been made with Monte Carlo and Nordheim's methods. The results obtained show that the Intermediate Resonance method developed in the present work offers considerable advantages over Nordheim's method: better accuracy in evaluating resonance absorption cross sections, and much smaller computing times. (author)

  10. A Mixed-Methods Study Investigating the Relationship between Media Multitasking Orientation and Grade Point Average

    Science.gov (United States)

    Lee, Jennifer

    2012-01-01

    The intent of this study was to examine the relationship between media multitasking orientation and grade point average. The study utilized a mixed-methods approach to investigate the research questions. In the quantitative section of the study, the primary method of statistical analyses was multiple regression. The independent variables for the…

  11. A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

    KAUST Repository

    Gao, Kai

    2015-06-05

    The development of reliable methods for upscaling fine-scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters for materials such as finely layered media or randomly oriented or aligned fractures. In such cases, the analytic solutions for upscaled properties can be used for accurate prediction of wave propagation. However, such theories cannot be applied directly to homogenize elastic media with more complex, arbitrary spatial heterogeneity. Therefore, we have proposed a numerical homogenization algorithm based on multiscale finite-element methods for simulating elastic wave propagation in heterogeneous, anisotropic elastic media. Specifically, our method used multiscale basis functions obtained from a local linear elasticity problem with appropriately defined boundary conditions. Homogenized, effective medium parameters were then computed using these basis functions, and the approach applied a numerical discretization that was similar to the rotated staggered-grid finite-difference scheme. Comparisons of the results from our method and from conventional, analytical approaches for finely layered media showed that the homogenization reliably estimated elastic parameters for this simple geometry. Additional tests examined anisotropic models with arbitrary spatial heterogeneity in which the average size of the heterogeneities ranged from several centimeters to several meters, and the ratio between the dominant wavelength and the average size of the arbitrary heterogeneities ranged from 10 to 100. Comparisons to finite-difference simulations proved that the numerical homogenization was equally accurate for these complex cases.

  12. Social Media for Disaster Situations: Methods, Opportunities and Challenges

    DEFF Research Database (Denmark)

    Mukkamala, Alivelu Manga; Beck, Roman

    2017-01-01

    , we analyze two-different case studies on natural disasters using Twitter as a platform for gathering and sharing information. In both the case studies, we applied different content analysis methods, both manual and automated, to analyze the valuable information from the user-generated content...

  13. Adaptive mixed finite element methods for Darcy flow in fractured porous media

    KAUST Repository

    Chen, Huangxin; Salama, Amgad; Sun, Shuyu

    2016-01-01

    In this paper, we propose adaptive mixed finite element methods for simulating the single-phase Darcy flow in two-dimensional fractured porous media. The reduced model that we use for the simulation is a discrete fracture model coupling Darcy flows in the matrix and the fractures, and the fractures are modeled by one-dimensional entities. The Raviart-Thomas mixed finite element methods are utilized for the solution of the coupled Darcy flows in the matrix and the fractures. In order to improve the efficiency of the simulation, we use adaptive mixed finite element methods based on novel residual-based a posteriori error estimators. In addition, we develop an efficient upscaling algorithm to compute the effective permeability of the fractured porous media. Several interesting examples of Darcy flow in the fractured porous media are presented to demonstrate the robustness of the algorithm.

  14. Adaptive mixed finite element methods for Darcy flow in fractured porous media

    KAUST Repository

    Chen, Huangxin

    2016-09-21

    In this paper, we propose adaptive mixed finite element methods for simulating the single-phase Darcy flow in two-dimensional fractured porous media. The reduced model that we use for the simulation is a discrete fracture model coupling Darcy flows in the matrix and the fractures, and the fractures are modeled by one-dimensional entities. The Raviart-Thomas mixed finite element methods are utilized for the solution of the coupled Darcy flows in the matrix and the fractures. In order to improve the efficiency of the simulation, we use adaptive mixed finite element methods based on novel residual-based a posteriori error estimators. In addition, we develop an efficient upscaling algorithm to compute the effective permeability of the fractured porous media. Several interesting examples of Darcy flow in the fractured porous media are presented to demonstrate the robustness of the algorithm.

  15. Iterative methods for photoacoustic tomography in attenuating acoustic media

    Science.gov (United States)

    Haltmeier, Markus; Kowar, Richard; Nguyen, Linh V.

    2017-11-01

    The development of efficient and accurate reconstruction methods is an important aspect of tomographic imaging. In this article, we address this issue for photoacoustic tomography. To this aim, we use models for acoustic wave propagation accounting for frequency dependent attenuation according to a wide class of attenuation laws that may include memory. We formulate the inverse problem of photoacoustic tomography in attenuating medium as an ill-posed operator equation in a Hilbert space framework that is tackled by iterative regularization methods. Our approach comes with a clear convergence analysis. For that purpose we derive explicit expressions for the adjoint problem that can efficiently be implemented. In contrast to time reversal, the employed adjoint wave equation is again damping and, thus has a stable solution. This stability property can be clearly seen in our numerical results. Moreover, the presented numerical results clearly demonstrate the efficiency and accuracy of the derived iterative reconstruction algorithms in various situations including the limited view case.

  16. Methods of using adsorption media for separating or removing constituents

    Science.gov (United States)

    Tranter, Troy J [Idaho Falls, ID; Herbst, R Scott [Idaho Falls, ID; Mann, Nicholas R [Blackfoot, ID; Todd, Terry A [Aberdeen, ID

    2011-10-25

    Methods of using an adsorption medium to remove at least one constituent from a feed stream. The method comprises contacting an adsorption medium with a feed stream comprising at least one constituent and removing the at least one constituent from the feed stream. The adsorption medium comprises a polyacrylonitrile (PAN) matrix and at least one metal hydroxide homogenously dispersed therein. The adsorption medium may comprise from approximately 15 wt % to approximately 90 wt % of the PAN and from approximately 10 wt % to approximately 85 wt % of the at least one metal hydroxide. The at least one metal hydroxide may be selected from the group consisting of ferric hydroxide, zirconium hydroxide, lanthanum hydroxide, cerium hydroxide, titanium hydroxide, copper hydroxide, antimony hydroxide, and molybdenum hydroxide.

  17. High capacity adsorption media and method of producing

    Science.gov (United States)

    Tranter, Troy J.; Mann, Nicholas R.; Todd, Terry A.; Herbst, Ronald S.

    2010-10-05

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  18. Functionalized Media and Methods of Making and Using Therefor

    Science.gov (United States)

    Huang, Yongsong (Inventor); Dillon, James (Inventor)

    2017-01-01

    Methods, compositions, devices and kits are provided herein for separating, scavenging, capturing or identifying a metal from a target using a medium or scaffold with a selenium-containing functional group. The medium or the scaffold including the selenium-containing functional group has affinity and specificity to metal ions or compounds having one or more metals, and efficiently separates, recovers, and scavenges of the metals from a target such as a sample, solution, suspension, or mixture.

  19. Efficient modeling of chiral media using SCN-TLM method

    Directory of Open Access Journals (Sweden)

    Yaich M.I.

    2004-01-01

    Full Text Available An efficient approach allowing to include linear bi-isotropic chiral materials in time-domain transmission line matrix (TLM calculations by employing recursive evaluation of the convolution of the electric and magnetic fields and susceptibility functions is presented. The new technique consists to add both voltage and current sources in supplementary stubs of the symmetrical condensed node (SCN of the TLM method. In this article, the details and the complete description of this approach are given. A comparison of the obtained numerical results with those of the literature reflects its validity and efficiency.

  20. Method to stimulate dose gradient in liquid media

    International Nuclear Information System (INIS)

    Scarlat, F.

    1993-01-01

    The depth absorbed dose from electrons with energy higher than 10 MeV shows a distribution with a big-percentage absorbed dose at the entrance surface and a small dose gradient. This is due to the big distance between the virtual focus and irradiated liquid medium. In order to stimulate dose gradient and decrease the surface dose, this paper presents a method for obtaining the second focus by means of a magnetostatic planar wiggler. Preliminary calculations indicated that the absorbed dose rate increases two-three times at the reference plane in the irradiated liquid medium. (Author)

  1. An experimental method of characterization of deformable porous media

    Directory of Open Access Journals (Sweden)

    Sommier Alain

    2012-04-01

    Full Text Available A porous medium saturated with liquid and placed within a medium that undergoes a change in pressure reacts by shrinking. If the space contains the same liquid as the pores of the sample, then after a certain lapse of time the sample dilates. By measuring this dilation kinetic the specimen’s permeability can be approximated. This experimental method is called Dynamic Pressurisation. We set up an experimental apparatus to measure the permeability and the different agarose gel compressibility moduli. The liquid contained inside the gel pores is water. We have realized experiments in water and others in oil. In Scherer’s method the flow is considered only in the radial direction. To find the real permeability value we have built a numerical model considering that both the liquid and the solid are compressible. The simulations were compared to the experimental results and have allowed finding the real value of the permeability by considering the flow in both radial and axial directions.

  2. An Extended Newmark-FDTD Method for Complex Dispersive Media

    Directory of Open Access Journals (Sweden)

    Yu-Qiang Zhang

    2018-01-01

    Full Text Available Based on polarizability in the form of a complex quadratic rational function, a novel finite-difference time-domain (FDTD approach combined with the Newmark algorithm is presented for dealing with a complex dispersive medium. In this paper, the time-stepping equation of the polarization vector is derived by applying simultaneously the Newmark algorithm to the two sides of a second-order time-domain differential equation obtained from the relation between the polarization vector and electric field intensity in the frequency domain by the inverse Fourier transform. Then, its accuracy and stability are discussed from the two aspects of theoretical analysis and numerical computation. It is observed that this method possesses the advantages of high accuracy, high stability, and a wide application scope and can thus be applied to the treatment of many complex dispersion models, including the complex conjugate pole residue model, critical point model, modified Lorentz model, and complex quadratic rational function.

  3. Two media method for linear attenuation coefficient determination of irregular soil samples

    International Nuclear Information System (INIS)

    Vici, Carlos Henrique Georges

    2004-01-01

    In several situations of nuclear applications, the knowledge of gamma-ray linear attenuation coefficient for irregular samples is necessary, such as in soil physics and geology. This work presents the validation of a methodology for the determination of the linear attenuation coefficient (μ) of irregular shape samples, in such a way that it is not necessary to know the thickness of the considered sample. With this methodology irregular soil samples (undeformed field samples) from Londrina region, north of Parana were studied. It was employed the two media method for the μ determination. It consists of the μ determination through the measurement of a gamma-ray beam attenuation by the sample sequentially immersed in two different media, with known and appropriately chosen attenuation coefficients. For comparison, the theoretical value of μ was calculated by the product of the mass attenuation coefficient, obtained by the WinXcom code, and the measured value of the density sample. This software employs the chemical composition of the samples and supplies a table of the mass attenuation coefficients versus the photon energy. To verify the validity of the two media method, compared with the simple gamma ray transmission method, regular pome stone samples were used. With these results for the attenuation coefficients and their respective deviations, it was possible to compare the two methods. In this way we concluded that the two media method is a good tool for the determination of the linear attenuation coefficient of irregular materials, particularly in the study of soils samples. (author)

  4. Development of Numerical Technique to Analyze the Flow Characteristics of Porous Media Using Lattice Boltzmann Method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Min [Kyonggi Univ., Suwon (Korea, Republic of)

    2016-11-15

    The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

  5. A method to measure the thermal-physical parameter of gas hydrate in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Diao, S.B.; Ye, Y.G.; Yue, Y.J.; Zhang, J.; Chen, Q.; Hu, G.W. [Qingdao Inst. of Marine Geology, Qingdao (China)

    2008-07-01

    It is important to explore and make good use of gas hydrates through the examination of the thermal-physical parameters of sediment. This paper presented a new type of simulation experiment using a device that was designed based on the theories of time domain reflection and transient hot wire method. A series of investigations were performed using this new device. The paper described the experiment, with reference to the experiment device and materials and method. It also presented the results of thermal physical properties; result of the thermal conductivity of water, dry sand and wet sand; and results of wet sand under various pressures. The time domain reflection (TDR) method was utilized to monitor the saturation of the hydrates. Both parallel hot-wire method and cross hot-wire method were utilized to measure the thermal conductivity of the gas hydrate in porous media. A TDR sensor which was equipped with both cross hot-wire probe and parallel hot-wire probe was developed in order to measure the cell temperature with these two methods at one time. It was concluded that the TDR probe could be taken as an online measurement skill in investigating the hydrate thermal physical property in porous media. The TDR sensor could monitor the hydrate formation process and the parallel hot-wire method and cross hot-wire method could effectively measure the thermal physical properties of the hydrates in porous media. 10 refs., 7 figs.

  6. Translating Evidence Into Practice via Social Media: A Mixed-Methods Study.

    Science.gov (United States)

    Maloney, Stephen; Tunnecliff, Jacqueline; Morgan, Prue; Gaida, Jamie E; Clearihan, Lyn; Sadasivan, Sivalal; Davies, David; Ganesh, Shankar; Mohanty, Patitapaban; Weiner, John; Reynolds, John; Ilic, Dragan

    2015-10-26

    Approximately 80% of research evidence relevant to clinical practice never reaches the clinicians delivering patient care. A key barrier for the translation of evidence into practice is the limited time and skills clinicians have to find and appraise emerging evidence. Social media may provide a bridge between health researchers and health service providers. The aim of this study was to determine the efficacy of social media as an educational medium to effectively translate emerging research evidence into clinical practice. The study used a mixed-methods approach. Evidence-based practice points were delivered via social media platforms. The primary outcomes of attitude, knowledge, and behavior change were assessed using a preintervention/postintervention evaluation, with qualitative data gathered to contextualize the findings. Data were obtained from 317 clinicians from multiple health disciplines, predominantly from the United Kingdom, Australia, the United States, India, and Malaysia. The participants reported an overall improvement in attitudes toward social media for professional development (P<.001). The knowledge evaluation demonstrated a significant increase in knowledge after the training (P<.001). The majority of respondents (136/194, 70.1%) indicated that the education they had received via social media had changed the way they practice, or intended to practice. Similarly, a large proportion of respondents (135/193, 69.9%) indicated that the education they had received via social media had increased their use of research evidence within their clinical practice. Social media may be an effective educational medium for improving knowledge of health professionals, fostering their use of research evidence, and changing their clinical behaviors by translating new research evidence into clinical practice.

  7. A finite volume method for density driven flows in porous media

    Directory of Open Access Journals (Sweden)

    Hilhorst Danielle

    2013-01-01

    Full Text Available In this paper, we apply a semi-implicit finite volume method for the numerical simulation of density driven flows in porous media; this amounts to solving a nonlinear convection-diffusion parabolic equation for the concentration coupled with an elliptic equation for the pressure. We compute the solutions for two specific problems: a problem involving a rotating interface between salt and fresh water and the classical but difficult Henry’s problem. All solutions are compared to results obtained by running FEflow, a commercial software package for the simulation of groundwater flow, mass and heat transfer in porous media.

  8. Stable and high order accurate difference methods for the elastic wave equation in discontinuous media

    KAUST Repository

    Duru, Kenneth

    2014-12-01

    © 2014 Elsevier Inc. In this paper, we develop a stable and systematic procedure for numerical treatment of elastic waves in discontinuous and layered media. We consider both planar and curved interfaces where media parameters are allowed to be discontinuous. The key feature is the highly accurate and provably stable treatment of interfaces where media discontinuities arise. We discretize in space using high order accurate finite difference schemes that satisfy the summation by parts rule. Conditions at layer interfaces are imposed weakly using penalties. By deriving lower bounds of the penalty strength and constructing discrete energy estimates we prove time stability. We present numerical experiments in two space dimensions to illustrate the usefulness of the proposed method for simulations involving typical interface phenomena in elastic materials. The numerical experiments verify high order accuracy and time stability.

  9. Numerical modeling of contaminant transport in fractured porous media using mixed finite-element and finitevolume methods

    KAUST Repository

    Dong, Chen; Sun, Shuyu; Taylor, Glenn A.

    2011-01-01

    A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods; i.e., the mixed finite-element (MFE) method and the finite-volume method. Adaptive

  10. Pseudo-spectral method using rotated staggered grid for elastic wave propagation in 3D arbitrary anisotropic media

    KAUST Repository

    Zou, Peng; Cheng, Jiubing

    2017-01-01

    -difference method, we propose a modified pseudo-spectral method for wave propagation in arbitrary anisotropic media. Compared with an existing remedy of staggered-grid pseudo-spectral method based on stiffness matrix decomposition and a possible alternative using

  11. Adaptive moving grid methods for two-phase flow in porous media

    KAUST Repository

    Dong, Hao

    2014-08-01

    In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can handle the nonlinearities of the governing equations in an efficient way. The adaptive moving grid method is then used to distribute more grid points near the sharp interfaces, which enables us to obtain accurate numerical solutions with fewer computational resources. The numerical experiments indicate that the proposed moving mesh strategy could be an effective way to approximate two-phase flows in porous media. © 2013 Elsevier B.V. All rights reserved.

  12. Electrostatic field in inhomogeneous dielectric media. I. Indirect boundary element method

    International Nuclear Information System (INIS)

    Goel, N.S.; Gang, F.; Ko, Z.

    1995-01-01

    A computationally fast method is presented for calculating electrostatic field in arbitrary inhomogeneous dielectric media with open boundary condition. The method involves dividing the whole space into cubical cells and then finding effective dielectric parameters for interfacial cells consisting of several dielectrics. The electrostatic problem is then solved using either the indirect boundary element method described in this paper or the so-called volume element method described in the companion paper. Both methods are tested for accuracy by comparing the numerically calculated electrostatic fields against those analytically obtained for a dielectric sphere and dielectric ellipsoid in a uniform field and for a dielectric sphere in a point charge field

  13. Cardiac Patients’ Experiences and Perceptions of Social Media: Mixed-Methods Study

    Science.gov (United States)

    Partridge, Stephanie R; Grunseit, Anne C; Gallagher, Patrick; Freeman, Becky; O'Hara, Blythe J; Neubeck, Lis; Due, Sarah; Paull, Glenn; Ding, Ding; Bauman, Adrian; Phongsavan, Philayrath; Roach, Kellie; Sadler, Leonie; Glinatsis, Helen

    2017-01-01

    Background Traditional in-person cardiac rehabilitation has substantial benefits for cardiac patients, which are offset by poor attendance. The rapid increase in social media use in older adults provides an opportunity to reach patients who are eligible for cardiac rehabilitation but unable to attend traditional face-to-face groups. However, there is a paucity of research on cardiac patients’ experiences and perspectives on using social media to support their health. Objective The aim of this study was to describe cardiac rehabilitation patients’ experiences in using social media in general and their perspective on using social media, particularly Facebook, to support their cardiac health and secondary prevention efforts. Methods A mixed-methods study was undertaken among cardiac rehabilitation patients in both urban and rural areas. First, this study included a survey (n=284) on social media use and capability. Second, six focus group interviews were conducted with current Facebook users (n=18) to elucidate Facebook experience and perspectives. Results Social media use was low (28.0%, 79/282) but more common in participants who were under 70 years of age, employed, and had completed high school. Social media users accessed Web-based information on general health issues (65%, 51/79), medications (56%, 44/79), and heart health (43%, 34/79). Participants were motivated to invest time in using Facebook for “keeping in touch” with family and friends and to be informed by expert cardiac health professionals and fellow cardiac participants if given the opportunity. It appeared that participants who had a higher level of Facebook capability (understanding of features and the consequences of their use and efficiency in use) spent more time on Facebook and reported higher levels of “liking,” commenting, or sharing posts. Furthermore, higher Facebook capability appeared to increase a participants’ willingness to participate in a cardiac Facebook support group

  14. Application of the lattice Boltzmann method to transient conduction and radiation heat transfer in cylindrical media

    International Nuclear Information System (INIS)

    Chaabane, Raoudha; Askri, Faouzi; Ben Nasrallah, Sassi

    2011-01-01

    In this paper, the lattice Boltzmann method (LBM) is applied to solve the energy equation of a transient conduction-radiation heat transfer problem in a two-dimensional cylindrical enclosure filled with an emitting, absorbing and scattering media. The control volume finite element method (CVFEM) is used to obtain the radiative information. To demonstrate the workability of the LBM in conjunction with the CVFEM to conduction-radiation problems in cylindrical media, the energy equation of the same problem is also solved using the finite difference method (FDM). The effects of different parameters, such as the grid size, the scattering albedo, the extinction coefficient and the conduction-radiation parameter on temperature distribution within the medium are studied. Results of the present work are compared with those available in the literature. LBM-CVFEM results are also compared with those given by the FDM-CVFEM. In all cases, good agreement has been obtained.

  15. Application of magnetic printing method to hard-disk media with double recording layers

    International Nuclear Information System (INIS)

    Ono, Takuya; Kuboki, Yoshiyuki; Ajishi, Yoshifumi; Saito, Akira

    2003-01-01

    The magnetic printing method, which can duplicate soft magnetic patterns containing digital information such as servosignals formed on a master disk onto recording media, enables signals to be written to hard-disk media having high coercivities above 6000 Oe. We propose the application of the magnetic printing method to a hard-disk medium having double recording layers, one layer of which has high coercivity and is to be printed with digital information. This double recording layer medium is a hard-disk medium that has a magnetic read-only-memory (MROM) layer. In this study, we demonstrated a method for printing to this medium, which has MROM, and discussed the magnetic properties and recording performances of this medium

  16. Analysis on the moment method for determining the moisture transport properties in porous media

    International Nuclear Information System (INIS)

    Wang, B.X.; Fang, Z.H.

    1987-01-01

    The authors discuss a new unsteady-state method proposed for determining the moisture transport properties in wet porous media. It is based on measurement of the change in moment of gravity caused by the moisture migration. In addition to its high-speed performance, this method may get rid of the difficulty in determination of a changing moisture content or moisture distribution. On this basis, two particular procedures are contrived: a constant heat source method for determining the thermal mass diffusivity and an instantaneous moisture source method for determining the moisture diffusivity

  17. Water Quality Improvement of Media Culture for Tilapia (Oreochromis niloticus) with Cleaner Production Method

    Science.gov (United States)

    Haeruddin; Supriharyono; Febrianto, S.

    2018-02-01

    The tilapia (Oreochromis niloticus), is known as a high adaptability and brackish water tolerance fish. This fish is also has a meat with high protein content, that ranges about 65 -75%. Generally the tilapia is cultured using a conventional system with high density. It is caused degradation of water quality of media culture, and finally increase mortality rate of fish cultured. The application of tilapia cultivation with cleaner production method by giving enzyme into the feed to upgrade the efficiency of feed utilization, presumed that could improve the water quality of cultivation media. It is due to the lower of feed and feces residues. Therefore the concentration of toxic compounds, such as ammonia, nitrite and sulfide, will be lower. The experiments were conducted for 35 days with a completely factorial randomized design. The first factor was the dosage of enzyme in the feed, consisting of 4 dosages, and the second factor was the duration of the test fish maintenance (5 weeks). Water quality variables examined included ammonia, nitrite and sulfide. The results showed that enzyme dosage had no significantly impact on ammonia, nitrite and sulfide concentrations in the test media culture. However, the feeding with enzyme in low dosage, resulted less concentration of ammonia, nitrite and sulfide than it was without enzyme). The duration of fish cultured has significantly effect on the concentration of ammonia, nitrite and sulfide in the test media. While it is no significantly correlation between dosage and duration of maintenance.

  18. Large-scale automated analysis of news media: a novel computational method for obesity policy research.

    Science.gov (United States)

    Hamad, Rita; Pomeranz, Jennifer L; Siddiqi, Arjumand; Basu, Sanjay

    2015-02-01

    Analyzing news media allows obesity policy researchers to understand popular conceptions about obesity, which is important for targeting health education and policies. A persistent dilemma is that investigators have to read and manually classify thousands of individual news articles to identify how obesity and obesity-related policy proposals may be described to the public in the media. A machine learning method called "automated content analysis" that permits researchers to train computers to "read" and classify massive volumes of documents was demonstrated. 14,302 newspaper articles that mentioned the word "obesity" during 2011-2012 were identified. Four states that vary in obesity prevalence and policy (Alabama, California, New Jersey, and North Carolina) were examined. The reliability of an automated program to categorize the media's framing of obesity as an individual-level problem (e.g., diet) and/or an environmental-level problem (e.g., obesogenic environment) was tested. The automated program performed similarly to human coders. The proportion of articles with individual-level framing (27.7-31.0%) was higher than the proportion with neutral (18.0-22.1%) or environmental-level framing (16.0-16.4%) across all states and over the entire study period (Pnews media was demonstrated. © 2014 The Obesity Society.

  19. Convergence of Discontinuous Galerkin Methods for Incompressible Two-Phase Flow in Heterogeneous Media

    KAUST Repository

    Kou, Jisheng; Sun, Shuyu

    2013-01-01

    A class of discontinuous Galerkin methods with interior penalties is presented for incompressible two-phase flow in heterogeneous porous media with capillary pressures. The semidiscrete approximate schemes for fully coupled system of two-phase flow are formulated. In highly heterogeneous permeable media, the saturation is discontinuous due to different capillary pressures, and therefore, the proposed methods incorporate the capillary pressures in the pressure equation instead of saturation equation. By introducing a coupling approach for stability and error estimates instead of the conventional separate analysis for pressure and saturation, the stability of the schemes in space and time and a priori hp error estimates are presented in the L2(H 1) for pressure and in the L∞(L2) and L2(H1) for saturation. Two time discretization schemes are introduced for effectively computing the discrete solutions. © 2013 Societ y for Industrial and Applied Mathematics.

  20. Analysis of radionuclide transport through fissured porous media with a perturbation method

    Energy Technology Data Exchange (ETDEWEB)

    Banat, M [JGC Corp., Tokyo (Japan)

    1995-04-01

    This paper presents a specific procedure for obtaining solutions for the transport of radionuclides in a fissured porous media. The concentration profiles are deduced for a wide range of Peclet numbers using a perturbation method with a multiscale of time. Results show clearly that because of an increase of longitudinal dispersion, the radionuclide moves faster with respect to the case of zero dispersion (i.e. an infinite Peclet number). The main purpose of this paper is to demonstrate the practical advantage of the present calculation method with respect to the classical numerical and analytical methods used for radionuclide transport. (author).

  1. Method for remote diagnostics of the internal structure of layered media

    International Nuclear Information System (INIS)

    Lychagov, V V; Kal'yanov, A L; Ryabukho, V P; Lyakin, D V

    2008-01-01

    The method of autocorrelation low coherence interferometry is proposed for diagnostics of inhomogeneities and the internal structure of layered technical and biological samples. In this method the low coherence optical field reflected from the layered sample is analysed by using a Michelson interferometer. Because the object is outside the interferometer, the distance between the interferometer and the object under study is not limited and thus the object can move during the measurements. Theoretical substantiation of the autocorrelation method for media with discrete and continuous optical structure modifications is presented. (special issue devoted to application of laser technologies in biophotonics and biomedical studies)

  2. High-order dynamic lattice method for seismic simulation in anisotropic media

    Science.gov (United States)

    Hu, Xiaolin; Jia, Xiaofeng

    2018-03-01

    The discrete particle-based dynamic lattice method (DLM) offers an approach to simulate elastic wave propagation in anisotropic media by calculating the anisotropic micromechanical interactions between these particles based on the directions of the bonds that connect them in the lattice. To build such a lattice, the media are discretized into particles. This discretization inevitably leads to numerical dispersion. The basic lattice unit used in the original DLM only includes interactions between the central particle and its nearest neighbours; therefore, it represents the first-order form of a particle lattice. The first-order lattice suffers from numerical dispersion compared with other numerical methods, such as high-order finite-difference methods, in terms of seismic wave simulation. Due to its unique way of discretizing the media, the particle-based DLM no longer solves elastic wave equations; this means that one cannot build a high-order DLM by simply creating a high-order discrete operator to better approximate a partial derivative operator. To build a high-order DLM, we carry out a thorough dispersion analysis of the method and discover that by adding more neighbouring particles into the lattice unit, the DLM will yield different spatial accuracy. According to the dispersion analysis, the high-order DLM presented here can adapt the requirement of spatial accuracy for seismic wave simulations. For any given spatial accuracy, we can design a corresponding high-order lattice unit to satisfy the accuracy requirement. Numerical tests show that the high-order DLM improves the accuracy of elastic wave simulation in anisotropic media.

  3. Interior penalty discontinuous Galerkin method for coupled elasto-acoustic media

    OpenAIRE

    Dudouit , Yohann; Giraud , Luc; Millot , Florence; Pernet , Sébastien

    2016-01-01

    We introduce a high order interior penalty discontinuous Galerkin scheme for the nu- merical solution of wave propagation in coupled elasto-acoustic media. A displacement formulation is used, which allows for the solution of the acoustic and elastic wave equations within the same framework. Weakly imposing the correct transmission condition is achieved by the derivation of adapted numerical fluxes. This generalization does not weaken the discontinuous Galerkin method, thus hp-non-conforming m...

  4. Switching industrial production processes from complex to defined media: method development and case study using the example of Penicillium chrysogenum.

    Science.gov (United States)

    Posch, Andreas E; Spadiut, Oliver; Herwig, Christoph

    2012-06-22

    Filamentous fungi are versatile cell factories and widely used for the production of antibiotics, organic acids, enzymes and other industrially relevant compounds at large scale. As a fact, industrial production processes employing filamentous fungi are commonly based on complex raw materials. However, considerable lot-to-lot variability of complex media ingredients not only demands for exhaustive incoming components inspection and quality control, but unavoidably affects process stability and performance. Thus, switching bioprocesses from complex to defined media is highly desirable. This study presents a strategy for strain characterization of filamentous fungi on partly complex media using redundant mass balancing techniques. Applying the suggested method, interdependencies between specific biomass and side-product formation rates, production of fructooligosaccharides, specific complex media component uptake rates and fungal strains were revealed. A 2-fold increase of the overall penicillin space time yield and a 3-fold increase in the maximum specific penicillin formation rate were reached in defined media compared to complex media. The newly developed methodology enabled fast characterization of two different industrial Penicillium chrysogenum candidate strains on complex media based on specific complex media component uptake kinetics and identification of the most promising strain for switching the process from complex to defined conditions. Characterization at different complex/defined media ratios using only a limited number of analytical methods allowed maximizing the overall industrial objectives of increasing both, method throughput and the generation of scientific process understanding.

  5. Monte Carlo method for polarized radiative transfer in gradient-index media

    International Nuclear Information System (INIS)

    Zhao, J.M.; Tan, J.Y.; Liu, L.H.

    2015-01-01

    Light transfer in gradient-index media generally follows curved ray trajectories, which will cause light beam to converge or diverge during transfer and induce the rotation of polarization ellipse even when the medium is transparent. Furthermore, the combined process of scattering and transfer along curved ray path makes the problem more complex. In this paper, a Monte Carlo method is presented to simulate polarized radiative transfer in gradient-index media that only support planar ray trajectories. The ray equation is solved to the second order to address the effect induced by curved ray trajectories. Three types of test cases are presented to verify the performance of the method, which include transparent medium, Mie scattering medium with assumed gradient index distribution, and Rayleigh scattering with realistic atmosphere refractive index profile. It is demonstrated that the atmospheric refraction has significant effect for long distance polarized light transfer. - Highlights: • A Monte Carlo method for polarized radiative transfer in gradient index media. • Effect of curved ray paths on polarized radiative transfer is considered. • Importance of atmospheric refraction for polarized light transfer is demonstrated

  6. High Frequency Asymptotic Methods for Traveltimes and Anisotropy Parameter Estimation in Azimuthally Varying Media

    KAUST Repository

    Masmoudi, Nabil

    2014-05-01

    Traveltimes are conventionally evaluated by solving the zero-order approximation of the Wentzel, Kramers and Brillouin (WKB) expansion of the wave equation. This high frequency approximation is good enough for most imaging applications and provides us with a traveltime equation called the eikonal equation. The eikonal equation is a non-linear partial differential equation which can be solved by any of the familiar numerical methods. Among the most popular of these methods is the method of characteristics which yields the ray tracing equations and the finite difference approaches. In the first part of the Master Thesis, we use the ray tracing method to solve the eikonal equation to get P-waves traveltimes for orthorhombic models with arbitrary orientation of symmetry planes. We start with a ray tracing procedure specified in curvilinear coordinate system valid for anisotropy of arbitrary symmetry. The coordinate system is constructed so that the coordinate lines are perpendicular to the symmetry planes of an orthorohombic medium. Advantages of this approach are the conservation of orthorhombic symmetry throughout the model and reduction of the number of parameters specifying the model. We combine this procedure with first-order ray tracing and dynamic ray tracing equations for P waves propagating in smooth, inhomogeneous, weakly anisotropic media. The first-order ray tracing and dynamic ray tracing equations are derived from the exact ones by replacing the exact P-wave eigenvalue of the Christoffel matrix by its first-order approximation. In the second part of the Master Thesis, we compute traveltimes using the fast marching method and we develop an approach to estimate the anisotropy parameters. The idea is to relate them analytically to traveltimes which is challenging in inhomogeneous media. Using perturbation theory, we develop traveltime approximations for transversely isotropic media with horizontal symmetry axis (HTI) as explicit functions of the

  7. Microwave measurement of electrical fields in different media – principles, methods and instrumentation

    International Nuclear Information System (INIS)

    St. Kliment Ohridski, Faculty of Physics, James Bourchier blvd., Sofia 1164 (Bulgaria))" data-affiliation=" (Sofia University St. Kliment Ohridski, Faculty of Physics, James Bourchier blvd., Sofia 1164 (Bulgaria))" >Dankov, Plamen I

    2014-01-01

    This paper, presented in the frame of 4th International Workshop and Summer School on Plasma Physics (IWSSPP'2010, Kiten, Bulgaria), is a brief review of the principles, methods and instrumentation of the microwave measurements of electrical fields in different media. The main part of the paper is connected with the description of the basic features of many field sensors and antennas – narrow-, broadband and ultra-wide band, miniaturized, reconfigurable and active sensors, etc. The main features and applicability of these sensors for determination of electric fields in different media is discussed. The last part of the paper presents the basic principles for utilization of electromagnetic 3-D simulators for E-field measurement purposes. Two illustrative examples have been given – the determination of the dielectric anisotropy of multi-layer materials and discussion of the selectivity of hairpin-probe for determination of the electron density in dense gaseous plasmas.

  8. Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM)

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, C.Y., E-mail: c.y.zhao@warwick.ac.u [School of Engineering, University of Warwick, Coventry CV4 7AL (United Kingdom); School of Energy and Power Engineering, Xi' an Jiaotong University, Xi' an, Shaanxi 710049 (China); Dai, L.N.; Tang, G.H.; Qu, Z.G.; Li, Z.Y. [School of Energy and Power Engineering, Xi' an Jiaotong University, Xi' an, Shaanxi 710049 (China)

    2010-10-15

    A thermal lattice BGK model with doubled populations is proposed to simulate the two-dimensional natural convection flow in porous media (porous metals). The accuracy of this method is validated by the benchmark solutions. The detailed flow and heat transfer at the pore level are revealed. The effects of pore density (cell size) and porosity on the natural convection are examined. Also the effect of porous media configuration (shape) on natural convection is investigated. The results showed that the overall heat transfer will be enhanced by lowering the porosity and cell size. The square porous medium can have a higher heat transfer performance than spheres due to the strong flow mixing and more surface area.

  9. Solution of stochastic media transport problems using a numerical quadrature-based method

    International Nuclear Information System (INIS)

    Pautz, S. D.; Franke, B. C.; Prinja, A. K.; Olson, A. J.

    2013-01-01

    We present a new conceptual framework for analyzing transport problems in random media. We decompose such problems into stratified subproblems according to the number of material pseudo-interfaces within realizations. For a given subproblem we assign pseudo-interface locations in each realization according to product quadrature rules, which allows us to deterministically generate a fixed number of realizations. Quadrature integration of the solutions of these realizations thus approximately solves each subproblem; the weighted superposition of solutions of the subproblems approximately solves the general stochastic media transport problem. We revisit some benchmark problems to determine the accuracy and efficiency of this approach in comparison to randomly generated realizations. We find that this method is very accurate and fast when the number of pseudo-interfaces in a problem is generally low, but that these advantages quickly degrade as the number of pseudo-interfaces increases. (authors)

  10. Review of Underground Construction Methods and Opening Stability for Repositories in Clay/Shale Media

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Ernest [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    This report reviews the art and practice of excavating and constructing underground facilities in clay/shale media, as part of a multi-year evaluation of the technical feasibility of direct disposal of spent nuclear fuel (SNF) in dual-purpose canisters (DPCs). The purpose is to review worldwide examples of large-scale excavations in clay/shale media, the methods used for excavation and constructi on, and the costs. It is anticipated that this information will help to show the feasibility of construction for a deep geologic respository for (on the order of) 10,000 large, heavy, heat-generating waste packages. This report will refine the clay/shale disposal concept for DPC -based waste packages, in support of future studies that include cost estimation.

  11. Mode decomposition methods for flows in high-contrast porous media. A global approach

    KAUST Repository

    Ghommem, Mehdi; Calo, Victor M.; Efendiev, Yalchin R.

    2014-01-01

    We apply dynamic mode decomposition (DMD) and proper orthogonal decomposition (POD) methods to flows in highly-heterogeneous porous media to extract the dominant coherent structures and derive reduced-order models via Galerkin projection. Permeability fields with high contrast are considered to investigate the capability of these techniques to capture the main flow features and forecast the flow evolution within a certain accuracy. A DMD-based approach shows a better predictive capability due to its ability to accurately extract the information relevant to long-time dynamics, in particular, the slowly-decaying eigenmodes corresponding to largest eigenvalues. Our study enables a better understanding of the strengths and weaknesses of the applicability of these techniques for flows in high-contrast porous media. Furthermore, we discuss the robustness of DMD- and POD-based reduced-order models with respect to variations in initial conditions, permeability fields, and forcing terms. © 2013 Elsevier Inc.

  12. Correlations between the orientation of magnetic recording media determined by Moessbauer spectroscopy and magnetic methods

    International Nuclear Information System (INIS)

    Pott, R.A.; Koch, W.; Leitner, L.

    1986-01-01

    The orientation of the easy magnetization axis of magnetic particles is a key parameter of the recording performance of magnetic recording media. Usually the orientation is measured by magnetic methods, but the applicability of the Moessbauer Spectroscopy has also been shown in the past. The authors show and discuss the correlations between the results obtained by magnetic and Moessbauer measurements for the example of several magnetic tapes. They demonstrate that by a combination of both methods one is even able to estimate the mean canting angles distribution width of the easy axis of magnetization. (Auth.)

  13. Temporal Methods to Detect Content-Based Anomalies in Social Media

    Energy Technology Data Exchange (ETDEWEB)

    Skryzalin, Jacek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Field, Jr., Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fisher, Andrew N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bauer, Travis L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-11-01

    Here, we develop a method for time-dependent topic tracking and meme trending in social media. Our objective is to identify time periods whose content differs signifcantly from normal, and we utilize two techniques to do so. The first is an information-theoretic analysis of the distributions of terms emitted during different periods of time. In the second, we cluster documents from each time period and analyze the tightness of each clustering. We also discuss a method of combining the scores created by each technique, and we provide ample empirical analysis of our methodology on various Twitter datasets.

  14. Spin echo SPI methods for quantitative analysis of fluids in porous media.

    Science.gov (United States)

    Li, Linqing; Han, Hui; Balcom, Bruce J

    2009-06-01

    Fluid density imaging is highly desirable in a wide variety of porous media measurements. The SPRITE class of MRI methods has proven to be robust and general in their ability to generate density images in porous media, however the short encoding times required, with correspondingly high magnetic field gradient strengths and filter widths, and low flip angle RF pulses, yield sub-optimal S/N images, especially at low static field strength. This paper explores two implementations of pure phase encode spin echo 1D imaging, with application to a proposed new petroleum reservoir core analysis measurement. In the first implementation of the pulse sequence, we modify the spin echo single point imaging (SE-SPI) technique to acquire the k-space origin data point, with a near zero evolution time, from the free induction decay (FID) following a 90 degrees excitation pulse. Subsequent k-space data points are acquired by separately phase encoding individual echoes in a multi-echo acquisition. T(2) attenuation of the echo train yields an image convolution which causes blurring. The T(2) blur effect is moderate for porous media with T(2) lifetime distributions longer than 5 ms. As a robust, high S/N, and fast 1D imaging method, this method will be highly complementary to SPRITE techniques for the quantitative analysis of fluid content in porous media. In the second implementation of the SE-SPI pulse sequence, modification of the basic measurement permits fast determination of spatially resolved T(2) distributions in porous media through separately phase encoding each echo in a multi-echo CPMG pulse train. An individual T(2) weighted image may be acquired from each echo. The echo time (TE) of each T(2) weighted image may be reduced to 500 micros or less. These profiles can be fit to extract a T(2) distribution from each pixel employing a variety of standard inverse Laplace transform methods. Fluid content 1D images are produced as an essential by product of determining the

  15. Leveraging social and digital media for participant recruitment: A review of methods from the Bayley Short Form Formative Study

    OpenAIRE

    Burke-Garcia, Amelia; Mathew, Sunitha

    2017-01-01

    Introduction Social media is increasingly being used in research, including recruitment. Methods For the Bayley Short Form Formative Study, which was conducted under the the National Children’s Study, traditional methods of recruitment proved to be ineffective. Therefore, digital media were identified as potential channels for recruitment. Results Results included successful recruitment of over 1800 infant and toddler participants to the Study. Conclusions This paper outlines the methods, res...

  16. A constrained Delaunay discretization method for adaptively meshing highly discontinuous geological media

    Science.gov (United States)

    Wang, Yang; Ma, Guowei; Ren, Feng; Li, Tuo

    2017-12-01

    A constrained Delaunay discretization method is developed to generate high-quality doubly adaptive meshes of highly discontinuous geological media. Complex features such as three-dimensional discrete fracture networks (DFNs), tunnels, shafts, slopes, boreholes, water curtains, and drainage systems are taken into account in the mesh generation. The constrained Delaunay triangulation method is used to create adaptive triangular elements on planar fractures. Persson's algorithm (Persson, 2005), based on an analogy between triangular elements and spring networks, is enriched to automatically discretize a planar fracture into mesh points with varying density and smooth-quality gradient. The triangulated planar fractures are treated as planar straight-line graphs (PSLGs) to construct piecewise-linear complex (PLC) for constrained Delaunay tetrahedralization. This guarantees the doubly adaptive characteristic of the resulted mesh: the mesh is adaptive not only along fractures but also in space. The quality of elements is compared with the results from an existing method. It is verified that the present method can generate smoother elements and a better distribution of element aspect ratios. Two numerical simulations are implemented to demonstrate that the present method can be applied to various simulations of complex geological media that contain a large number of discontinuities.

  17. 76 FR 28664 - Method 301-Field Validation of Pollutant Measurement Methods From Various Waste Media

    Science.gov (United States)

    2011-05-18

    ... . d m = The mean of the paired sample differences. n = Total number of paired samples. 7.4.2 t Test... being compared to a validated test method as part of the Method 301 validation and an audit sample for... tighten the acceptance criteria for the precision of candidate alternative test methods. One commenter...

  18. From everyday communicative figurations to rigorous audience news repertoires: A mixed method approach to cross-media news consumption

    Directory of Open Access Journals (Sweden)

    Christian Kobbernagel

    2016-06-01

    Full Text Available In the last couple of decades there has been an unprecedented explosion of news media platforms and formats, as a succession of digital and social media have joined the ranks of legacy media. We live in a ‘hybrid media system’ (Chadwick, 2013, in which people build their cross-media news repertoires from the ensemble of old and new media available. This article presents an innovative mixed-method approach with considerable explanatory power to the exploration of patterns of news media consumption. This approach tailors Q-methodology in the direction of a qualitative study of news consumption, in which a card sorting exercise serves to translate the participants’ news media preferences into a form that enables the researcher to undertake a rigorous factor-analytical construction of their news consumption repertoires. This interpretive, factor-analytical procedure, which results in the building of six audience news repertoires in Denmark, also preserves the qualitative thickness of the participants’ verbal accounts of the communicative figurations of their day-in-the-life with the news media.

  19. The application of ethnographic method in the study of digital media

    Directory of Open Access Journals (Sweden)

    Amelia Capobianco

    2015-04-01

    Full Text Available Digital media raise methodological issues of some relevance. The following article tries to be a contribution to the qualitative analysis of Social Networks through the use of media ethnography. We deal with issues such as time and space and with how these dimension get transformed in digital environments; the very definition of environment and social network; an effective communication; the constant flow between online and off-line activities; the role of the “digital” researcher, his/her influence on the subjects’ actions, his/her actual competence about the media and the balance of the management of situations that cross online and off-line environments, ethics and the protection of privacy. The figure of the ethnographic researcher changes, while ethnography represents – perhaps – one of the most effective methods for a research that maintains a phenomenological basis, helping to understand the meaning and value that certain tools, used for specific purposes, can take on for the youngest users.

  20. A multi-scale network method for two-phase flow in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Khayrat, Karim, E-mail: khayratk@ifd.mavt.ethz.ch; Jenny, Patrick

    2017-08-01

    Pore-network models of porous media are useful in the study of pore-scale flow in porous media. In order to extract macroscopic properties from flow simulations in pore-networks, it is crucial the networks are large enough to be considered representative elementary volumes. However, existing two-phase network flow solvers are limited to relatively small domains. For this purpose, a multi-scale pore-network (MSPN) method, which takes into account flow-rate effects and can simulate larger domains compared to existing methods, was developed. In our solution algorithm, a large pore network is partitioned into several smaller sub-networks. The algorithm to advance the fluid interfaces within each subnetwork consists of three steps. First, a global pressure problem on the network is solved approximately using the multiscale finite volume (MSFV) method. Next, the fluxes across the subnetworks are computed. Lastly, using fluxes as boundary conditions, a dynamic two-phase flow solver is used to advance the solution in time. Simulation results of drainage scenarios at different capillary numbers and unfavourable viscosity ratios are presented and used to validate the MSPN method against solutions obtained by an existing dynamic network flow solver.

  1. Progress in electrical impedance imaging of binary media: 1: Analytical and numerical methods

    International Nuclear Information System (INIS)

    Ovacik, Levent; Lin Jentai; Jones, Owen C.

    1998-01-01

    This is the first of two papers summarizing the use of electrical impedance excitation/measurement for producing cross sectional images of the distribution of insulating media imbedded in conducting media. This computed tomographic approach finds the distribution of electrical properties of an electric field which minimizes in the least squares sense the difference between measured and computed boundary response to excitation. In this paper we briefly review the basic analytical methods developed for this system. We then extend these methods to three dimensions, add a method for preconditioning voltages for error correction, describe methods for optimizing the resolution of a target by providing optimal excitation patterns and then describe the overall numerical sensitivity. The second paper then demonstrates the ability of this system to image multiple, separate, differently-sized two-dimensional or three-dimensional targets with demonstrated linear sensitivity of over 30:1 with maximum possible linear sensitivity of one part in 1300 based on our ability to distinguish variations from a homogeneous background. (author)

  2. A multi-scale network method for two-phase flow in porous media

    International Nuclear Information System (INIS)

    Khayrat, Karim; Jenny, Patrick

    2017-01-01

    Pore-network models of porous media are useful in the study of pore-scale flow in porous media. In order to extract macroscopic properties from flow simulations in pore-networks, it is crucial the networks are large enough to be considered representative elementary volumes. However, existing two-phase network flow solvers are limited to relatively small domains. For this purpose, a multi-scale pore-network (MSPN) method, which takes into account flow-rate effects and can simulate larger domains compared to existing methods, was developed. In our solution algorithm, a large pore network is partitioned into several smaller sub-networks. The algorithm to advance the fluid interfaces within each subnetwork consists of three steps. First, a global pressure problem on the network is solved approximately using the multiscale finite volume (MSFV) method. Next, the fluxes across the subnetworks are computed. Lastly, using fluxes as boundary conditions, a dynamic two-phase flow solver is used to advance the solution in time. Simulation results of drainage scenarios at different capillary numbers and unfavourable viscosity ratios are presented and used to validate the MSPN method against solutions obtained by an existing dynamic network flow solver.

  3. Comparative effectiveness of the methods adenoidectomy in cнildren with exudative otitis media

    Directory of Open Access Journals (Sweden)

    Gusakov A.

    2016-03-01

    Full Text Available Actuality: A thorough sanation of the nasopharynx is essential for successful treatment of the exudative otitis media (EOM. The literature describes in detail the state of the nasopharynx after different types of adenoidectomy. The classifications of the location of the remnants of lymphoid tissue and the extent of scarring in the nasopharynx are given.The subject of this work is to trace the relationship of postoperative nasopharyngeal changes with recurrent EOM. Objective: To study the immediate and long-term results of different methods of surgical treatment of hypertrophy of the nasopharyngeal lymphoid tissue in children with exudative otitis media. Materials and Methods: This paper presents information on the results of treatment of 62 children of 5–7 years suffering from exudative otitis media. Observations were carried out in two groups of patients. The first group included 28 children previously undergone adenoidectomy, with the signs of recurrent exudative otitis. The second group included 34 children with exudative otitis previously untreated surgically. The task of the investigation is to study the effectiveness of endonasal and extranasal methods of surgical removal of nasopharengeal lymphoid tissue with a minimum probability of scar obliteration of the mouth of the Eustachian tube. Results and discussion: The priority method in nasopharengeal surgery in children is extranasal access with shaver technology in conjunction with cold plasma surgery. The using of these methods gives a clear visualization of the operating field under conditions of moderately bleeding wound. On the other hand, endonasal approach is associated with traumatization of the nasal mucosa with incomplete volume visualization of the surgical field. This combination can result in a longer healing of the surgical wound, the formation of adhesions of the nasal cavity and scarring in the nasopharynx. Complete visualization of the operating field significantly

  4. Into the Meta: Research Methods for Moving beyond Social Media Surfacing

    Science.gov (United States)

    Gerber, Hannah R.; Lynch, Tom Liam

    2017-01-01

    This article examines the role of social media metadata in conducting studies of professional development in social media spaces. It traces the brief history of research surrounding social media spaces, noting the lack of research that drills into social media metadata in research on professional development. Framed through a software studies…

  5. Development of capillary electrophoresis methods for quantitative determination of taurine in vehicle system and biological media.

    Science.gov (United States)

    da Silva, Dayse L P; Rüttinger, Hans H; Mrestani, Yahia; Baum, Walter F; Neubert, Reinhard H H

    2006-06-01

    CE methods have been developed for the determination of taurine in pharmaceutical formulation (microemulsion) and in biological media such as sweat. The CE system with end-column pulsed amperometric detection has been found to be an interesting method in comparison with UV and fluorescence detection for its simplicity and rapidity. A gold-disk electrode of 100 mm diameter was used as the working electrode. The effects of a field decoupler at the end of the capillary, separation voltage, injection and pressure times were investigated. A detection limit of 4 x 10(-5) mol/L was reached using integrated pulsed amperometric detection, a method successfully applied to taurine analysis of the biological samples such as sweat. For taurine analysis of oil-in-water microemulsion, fluorescence detector was the favored method, the detection limit of which was 4 x 10(-11) mol/L.

  6. Cardiac Patients' Experiences and Perceptions of Social Media: Mixed-Methods Study.

    Science.gov (United States)

    Partridge, Stephanie R; Grunseit, Anne C; Gallagher, Patrick; Freeman, Becky; O'Hara, Blythe J; Neubeck, Lis; Due, Sarah; Paull, Glenn; Ding, Ding; Bauman, Adrian; Phongsavan, Philayrath; Roach, Kellie; Sadler, Leonie; Glinatsis, Helen; Gallagher, Robyn

    2017-09-15

    Traditional in-person cardiac rehabilitation has substantial benefits for cardiac patients, which are offset by poor attendance. The rapid increase in social media use in older adults provides an opportunity to reach patients who are eligible for cardiac rehabilitation but unable to attend traditional face-to-face groups. However, there is a paucity of research on cardiac patients' experiences and perspectives on using social media to support their health. The aim of this study was to describe cardiac rehabilitation patients' experiences in using social media in general and their perspective on using social media, particularly Facebook, to support their cardiac health and secondary prevention efforts. A mixed-methods study was undertaken among cardiac rehabilitation patients in both urban and rural areas. First, this study included a survey (n=284) on social media use and capability. Second, six focus group interviews were conducted with current Facebook users (n=18) to elucidate Facebook experience and perspectives. Social media use was low (28.0%, 79/282) but more common in participants who were under 70 years of age, employed, and had completed high school. Social media users accessed Web-based information on general health issues (65%, 51/79), medications (56%, 44/79), and heart health (43%, 34/79). Participants were motivated to invest time in using Facebook for "keeping in touch" with family and friends and to be informed by expert cardiac health professionals and fellow cardiac participants if given the opportunity. It appeared that participants who had a higher level of Facebook capability (understanding of features and the consequences of their use and efficiency in use) spent more time on Facebook and reported higher levels of "liking," commenting, or sharing posts. Furthermore, higher Facebook capability appeared to increase a participants' willingness to participate in a cardiac Facebook support group. More capable users were more receptive to the use

  7. Leveraging social and digital media for participant recruitment: A review of methods from the Bayley Short Form Formative Study.

    Science.gov (United States)

    Burke-Garcia, Amelia; Mathew, Sunitha

    2017-06-01

    Social media is increasingly being used in research, including recruitment. For the Bayley Short Form Formative Study, which was conducted under the the National Children's Study, traditional methods of recruitment proved to be ineffective. Therefore, digital media were identified as potential channels for recruitment. Results included successful recruitment of over 1800 infant and toddler participants to the Study. This paper outlines the methods, results, and future research opportunities.

  8. Hybrid Multiscale Finite Volume method for multiresolution simulations of flow and reactive transport in porous media

    Science.gov (United States)

    Barajas-Solano, D. A.; Tartakovsky, A. M.

    2017-12-01

    We present a multiresolution method for the numerical simulation of flow and reactive transport in porous, heterogeneous media, based on the hybrid Multiscale Finite Volume (h-MsFV) algorithm. The h-MsFV algorithm allows us to couple high-resolution (fine scale) flow and transport models with lower resolution (coarse) models to locally refine both spatial resolution and transport models. The fine scale problem is decomposed into various "local'' problems solved independently in parallel and coordinated via a "global'' problem. This global problem is then coupled with the coarse model to strictly ensure domain-wide coarse-scale mass conservation. The proposed method provides an alternative to adaptive mesh refinement (AMR), due to its capacity to rapidly refine spatial resolution beyond what's possible with state-of-the-art AMR techniques, and the capability to locally swap transport models. We illustrate our method by applying it to groundwater flow and reactive transport of multiple species.

  9. a New Method for Calculating Fractal Dimensions of Porous Media Based on Pore Size Distribution

    Science.gov (United States)

    Xia, Yuxuan; Cai, Jianchao; Wei, Wei; Hu, Xiangyun; Wang, Xin; Ge, Xinmin

    Fractal theory has been widely used in petrophysical properties of porous rocks over several decades and determination of fractal dimensions is always the focus of researches and applications by means of fractal-based methods. In this work, a new method for calculating pore space fractal dimension and tortuosity fractal dimension of porous media is derived based on fractal capillary model assumption. The presented work establishes relationship between fractal dimensions and pore size distribution, which can be directly used to calculate the fractal dimensions. The published pore size distribution data for eight sandstone samples are used to calculate the fractal dimensions and simultaneously compared with prediction results from analytical expression. In addition, the proposed fractal dimension method is also tested through Micro-CT images of three sandstone cores, and are compared with fractal dimensions by box-counting algorithm. The test results also prove a self-similar fractal range in sandstone when excluding smaller pores.

  10. Media Entrepreneurship

    DEFF Research Database (Denmark)

    Khajeheian, Datis

    2017-01-01

    Media Entrepreneurship has been an ambiguous, unclear and controversial concept and despite of growing academic efforts in the last decade, it is still a poorly defined subject. This paper is an effort to fill this gap by providing a comprehensive definition of media entrepreneurship. Firstly......, a literature review conducted and entrepreneurship, media, opportunity and innovation as building blocks of media entrepreneurship explained. Then by using of a mixed of bibliographic method and a Delphi method with multi-stage analysis process, a consensual definition of media entrepreneurship proposed...... entrepreneurship....

  11. Radiative heat transfer in strongly forward scattering media using the discrete ordinates method

    Science.gov (United States)

    Granate, Pedro; Coelho, Pedro J.; Roger, Maxime

    2016-03-01

    The discrete ordinates method (DOM) is widely used to solve the radiative transfer equation, often yielding satisfactory results. However, in the presence of strongly forward scattering media, this method does not generally conserve the scattering energy and the phase function asymmetry factor. Because of this, the normalization of the phase function has been proposed to guarantee that the scattering energy and the asymmetry factor are conserved. Various authors have used different normalization techniques. Three of these are compared in the present work, along with two other methods, one based on the finite volume method (FVM) and another one based on the spherical harmonics discrete ordinates method (SHDOM). In addition, the approximation of the Henyey-Greenstein phase function by a different one is investigated as an alternative to the phase function normalization. The approximate phase function is given by the sum of a Dirac delta function, which accounts for the forward scattering peak, and a smoother scaled phase function. In this study, these techniques are applied to three scalar radiative transfer test cases, namely a three-dimensional cubic domain with a purely scattering medium, an axisymmetric cylindrical enclosure containing an emitting-absorbing-scattering medium, and a three-dimensional transient problem with collimated irradiation. The present results show that accurate predictions are achieved for strongly forward scattering media when the phase function is normalized in such a way that both the scattered energy and the phase function asymmetry factor are conserved. The normalization of the phase function may be avoided using the FVM or the SHDOM to evaluate the in-scattering term of the radiative transfer equation. Both methods yield results whose accuracy is similar to that obtained using the DOM along with normalization of the phase function. Very satisfactory predictions were also achieved using the delta-M phase function, while the delta

  12. Nucleophilic Fluorination Reactions in Novel Reaction Media for 18F-Fluorine Labeling Method

    International Nuclear Information System (INIS)

    Kim, Dong Wook; Jeong, Hwan Jeong; Lim, Seok Tae; Sohn, Myung Hee

    2009-01-01

    Noninvasive imaging of molecular and biological processes in living subjects with positron emission tomography (PET) provides exciting opportunities to monitor metabolism and detect diseases in humans. Measuring these processes with PET requires the preparation of specific molecular imaging probes labeled with 18F-fluorine. In this review we describe recent methods and novel trends for the introduction of 18 F-fluorine into molecules which in turn are intended to serve as imaging agents for PET study. Nucleophilic 18 F-fluorination of some halo- and mesyloxyalkanes to the corresponding 18 F-fluoroalkanes with 18 F-fluoride obtained from an 18 O(p,n) 18 F reaction, using novel reaction media system such as an ionic liquidor tert-alcohol, has been studied as a new method for 18 F-fluorine labeling. Ionic liquid method is rapid and particularly convenient because 18 F-fluoride in H 2 O can be added directly to the reaction media, obviating the careful drying that is typically required for currently used radiofluorination methods. The nonpolar protic tert-alcohol enhances the nucleophilicity of the fluoride ion dramatically in the absence of any kind of catalyst, greatly increasing the rate of the nucleophilic fluorination and reducing formation of byproducts compared with conventional methods using dipolar aprotic solvents. The great efficacy of this method is a particular advantage in labeling radiopharmaceuticals with 18 F-fluorine for PET imaging, and it is illustrated by the synthesis of 18 F-fluoride radiolabeled molecular imaging probes, such as 18 F-FDG, 18 F-FLT, 18 F-FP-CIT, and 18 F-FMISO, in high yield and purity and in shorter times compared to conventional syntheses

  13. Upscaling solute transport in naturally fractured porous media with the continuous time random walk method

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, S.; Cortis, A.; Birkholzer, J.T.

    2010-04-01

    Solute transport in fractured porous media is typically 'non-Fickian'; that is, it is characterized by early breakthrough and long tailing and by nonlinear growth of the Green function-centered second moment. This behavior is due to the effects of (1) multirate diffusion occurring between the highly permeable fracture network and the low-permeability rock matrix, (2) a wide range of advection rates in the fractures and, possibly, the matrix as well, and (3) a range of path lengths. As a consequence, prediction of solute transport processes at the macroscale represents a formidable challenge. Classical dual-porosity (or mobile-immobile) approaches in conjunction with an advection-dispersion equation and macroscopic dispersivity commonly fail to predict breakthrough of fractured porous media accurately. It was recently demonstrated that the continuous time random walk (CTRW) method can be used as a generalized upscaling approach. Here we extend this work and use results from high-resolution finite element-finite volume-based simulations of solute transport in an outcrop analogue of a naturally fractured reservoir to calibrate the CTRW method by extracting a distribution of retention times. This procedure allows us to predict breakthrough at other model locations accurately and to gain significant insight into the nature of the fracture-matrix interaction in naturally fractured porous reservoirs with geologically realistic fracture geometries.

  14. Mode decomposition methods for flows in high-contrast porous media. Global-local approach

    KAUST Repository

    Ghommem, Mehdi; Presho, Michael; Calo, Victor M.; Efendiev, Yalchin R.

    2013-01-01

    In this paper, we combine concepts of the generalized multiscale finite element method (GMsFEM) and mode decomposition methods to construct a robust global-local approach for model reduction of flows in high-contrast porous media. This is achieved by implementing Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD) techniques on a coarse grid computed using GMsFEM. The resulting reduced-order approach enables a significant reduction in the flow problem size while accurately capturing the behavior of fully-resolved solutions. We consider a variety of high-contrast coefficients and present the corresponding numerical results to illustrate the effectiveness of the proposed technique. This paper is a continuation of our work presented in Ghommem et al. (2013) [1] where we examine the applicability of POD and DMD to derive simplified and reliable representations of flows in high-contrast porous media on fully resolved models. In the current paper, we discuss how these global model reduction approaches can be combined with local techniques to speed-up the simulations. The speed-up is due to inexpensive, while sufficiently accurate, computations of global snapshots. © 2013 Elsevier Inc.

  15. Application of distributed point source method (DPSM) to wave propagation in anisotropic media

    Science.gov (United States)

    Fooladi, Samaneh; Kundu, Tribikram

    2017-04-01

    Distributed Point Source Method (DPSM) was developed by Placko and Kundu1, as a technique for modeling electromagnetic and elastic wave propagation problems. DPSM has been used for modeling ultrasonic, electrostatic and electromagnetic fields scattered by defects and anomalies in a structure. The modeling of such scattered field helps to extract valuable information about the location and type of defects. Therefore, DPSM can be used as an effective tool for Non-Destructive Testing (NDT). Anisotropy adds to the complexity of the problem, both mathematically and computationally. Computation of the Green's function which is used as the fundamental solution in DPSM is considerably more challenging for anisotropic media, and it cannot be reduced to a closed-form solution as is done for isotropic materials. The purpose of this study is to investigate and implement DPSM for an anisotropic medium. While the mathematical formulation and the numerical algorithm will be considered for general anisotropic media, more emphasis will be placed on transversely isotropic materials in the numerical example presented in this paper. The unidirectional fiber-reinforced composites which are widely used in today's industry are good examples of transversely isotropic materials. Development of an effective and accurate NDT method based on these modeling results can be of paramount importance for in-service monitoring of damage in composite structures.

  16. Mode decomposition methods for flows in high-contrast porous media. Global-local approach

    KAUST Repository

    Ghommem, Mehdi

    2013-11-01

    In this paper, we combine concepts of the generalized multiscale finite element method (GMsFEM) and mode decomposition methods to construct a robust global-local approach for model reduction of flows in high-contrast porous media. This is achieved by implementing Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD) techniques on a coarse grid computed using GMsFEM. The resulting reduced-order approach enables a significant reduction in the flow problem size while accurately capturing the behavior of fully-resolved solutions. We consider a variety of high-contrast coefficients and present the corresponding numerical results to illustrate the effectiveness of the proposed technique. This paper is a continuation of our work presented in Ghommem et al. (2013) [1] where we examine the applicability of POD and DMD to derive simplified and reliable representations of flows in high-contrast porous media on fully resolved models. In the current paper, we discuss how these global model reduction approaches can be combined with local techniques to speed-up the simulations. The speed-up is due to inexpensive, while sufficiently accurate, computations of global snapshots. © 2013 Elsevier Inc.

  17. Advances in the discrete ordinates and finite volume methods for the solution of radiative heat transfer problems in participating media

    International Nuclear Information System (INIS)

    Coelho, Pedro J.

    2014-01-01

    Many methods are available for the solution of radiative heat transfer problems in participating media. Among these, the discrete ordinates method (DOM) and the finite volume method (FVM) are among the most widely used ones. They provide a good compromise between accuracy and computational requirements, and they are relatively easy to integrate in CFD codes. This paper surveys recent advances on these numerical methods. Developments concerning the grid structure (e.g., new formulations for axisymmetrical geometries, body-fitted structured and unstructured meshes, embedded boundaries, multi-block grids, local grid refinement), the spatial discretization scheme, and the angular discretization scheme are described. Progress related to the solution accuracy, solution algorithm, alternative formulations, such as the modified DOM and FVM, even-parity formulation, discrete-ordinates interpolation method and method of lines, and parallelization strategies is addressed. The application to non-gray media, variable refractive index media, and transient problems is also reviewed. - Highlights: • We survey recent advances in the discrete ordinates and finite volume methods. • Developments in spatial and angular discretization schemes are described. • Progress in solution algorithms and parallelization methods is reviewed. • Advances in the transient solution of the radiative transfer equation are appraised. • Non-gray media and variable refractive index media are briefly addressed

  18. Variational Multiscale Finite Element Method for Flows in Highly Porous Media

    KAUST Repository

    Iliev, O.; Lazarov, R.; Willems, J.

    2011-01-01

    We present a two-scale finite element method (FEM) for solving Brinkman's and Darcy's equations. These systems of equations model fluid flows in highly porous and porous media, respectively. The method uses a recently proposed discontinuous Galerkin FEM for Stokes' equations by Wang and Ye and the concept of subgrid approximation developed by Arbogast for Darcy's equations. In order to reduce the "resonance error" and to ensure convergence to the global fine solution, the algorithm is put in the framework of alternating Schwarz iterations using subdomains around the coarse-grid boundaries. The discussed algorithms are implemented using the Deal.II finite element library and are tested on a number of model problems. © 2011 Society for Industrial and Applied Mathematics.

  19. Variational Multiscale Finite Element Method for Flows in Highly Porous Media

    KAUST Repository

    Iliev, O.

    2011-10-01

    We present a two-scale finite element method (FEM) for solving Brinkman\\'s and Darcy\\'s equations. These systems of equations model fluid flows in highly porous and porous media, respectively. The method uses a recently proposed discontinuous Galerkin FEM for Stokes\\' equations by Wang and Ye and the concept of subgrid approximation developed by Arbogast for Darcy\\'s equations. In order to reduce the "resonance error" and to ensure convergence to the global fine solution, the algorithm is put in the framework of alternating Schwarz iterations using subdomains around the coarse-grid boundaries. The discussed algorithms are implemented using the Deal.II finite element library and are tested on a number of model problems. © 2011 Society for Industrial and Applied Mathematics.

  20. Effective thermal conductivity estimate of heterogenous media by a lattice Boltzmann method

    Energy Technology Data Exchange (ETDEWEB)

    Arab, M.R.; Pateyron, B.; El Ganaoui, M.; Labbe, J.C. [Limoges Univ., Limoges (France). Science des Procedes Ceramiques et de Traitements de Surface

    2009-07-01

    Statistical lattice Boltzmann methods (LBM) are often used to simulate isothermal fluid flow for problems with complex geometry or porous structures. This study used an LBM algorithm to evaluate the effective thermal conductivity (ETC) of simple 2-D configurations. The LBM algorithm was also used to estimate the ECT of a porous structure. The Bhatnagar-Gross-Krook approximation was used to determine the discrete form of the Boltzmann equation for a single phase flow. A comparison with the finite element method (FEM) was also conducted. Results of the study demonstrated that the LBM algorithm accurately simulates the phenomena of heat and mass transfer for both the simple 2-D configurations as well as the porous media. The tool will be used to determine the influence of thermal contact resistance on heat transfer. 6 refs., 1 tab., 7 figs.

  1. Comparison of Different Recruitment Methods for Sexual and Reproductive Health Research: Social Media-Based Versus Conventional Methods.

    Science.gov (United States)

    Motoki, Yoko; Miyagi, Etsuko; Taguri, Masataka; Asai-Sato, Mikiko; Enomoto, Takayuki; Wark, John Dennis; Garland, Suzanne Marie

    2017-03-10

    Prior research about the sexual and reproductive health of young women has relied mostly on self-reported survey studies. Thus, participant recruitment using Web-based methods can improve sexual and reproductive health research about cervical cancer prevention. In our prior study, we reported that Facebook is a promising way to reach young women for sexual and reproductive health research. However, it remains unknown whether Web-based or other conventional recruitment methods (ie, face-to-face or flyer distribution) yield comparable survey responses from similar participants. We conducted a survey to determine whether there was a difference in the sexual and reproductive health survey responses of young Japanese women based on recruitment methods: social media-based and conventional methods. From July 2012 to March 2013 (9 months), we invited women of ages 16-35 years in Kanagawa, Japan, to complete a Web-based questionnaire. They were recruited through either a social media-based (social networking site, SNS, group) or by conventional methods (conventional group). All participants enrolled were required to fill out and submit their responses through a Web-based questionnaire about their sexual and reproductive health for cervical cancer prevention. Of the 243 participants, 52.3% (127/243) were recruited by SNS, whereas 47.7% (116/243) were recruited by conventional methods. We found no differences between recruitment methods in responses to behaviors and attitudes to sexual and reproductive health survey, although more participants from the conventional group (15%, 14/95) chose not to answer the age of first intercourse compared with those from the SNS group (5.2%, 6/116; P=.03). No differences were found between recruitment methods in the responses of young Japanese women to a Web-based sexual and reproductive health survey. ©Yoko Motoki, Etsuko Miyagi, Masataka Taguri, Mikiko Asai-Sato, Takayuki Enomoto, John Dennis Wark, Suzanne Marie Garland. Originally

  2. Exploring the viability of using online social media advertising as a recruitment method for smoking cessation clinical trials.

    Science.gov (United States)

    Frandsen, Mai; Walters, Julia; Ferguson, Stuart G

    2014-02-01

    The aim of the present study was to explore the viability of using social media as a recruitment tool in a clinical research trial. Sociodemographic data and smoking characteristics were assessed in 266 participants recruited to investigate the effectiveness of a behavioral support program for smoking cessation. For analysis, participants were separated into 2 groups based on whether they were recruited either using traditional means (flyers, word of mouth, or newspaper advertisement; n = 125, 47.0%) or by advertisements in online social media (n = 138, 51.9%). Participants recruited via social media were significantly younger, but there were no differences in other socioeconomic variables or smoking characteristics compared with participants recruited via other traditional means. The findings of the present study suggest that using online social media is a viable recruitment method for smoking studies and compliments other more traditional recruitment methods.

  3. Study on Two-Phase Flow in Heterogeneous Porous Media by Light Transmission Method

    Science.gov (United States)

    Qiao, W.

    2015-12-01

    The non-aqueous phase liquid (NAPL) released to the subsurface can form residual ganglia and globules occupying pores and also accumulate and form pools, in which multiphase system forms. Determining transient fluid saturations in a multiphase system is essential to understand the flow characteristics of systems and to perform effective remediation strategies. As a non-destructive and non-invasive laboratory technique utilized for the measurement of liquid saturation in porous media, light transmission is of the lowest cost and safe. Utilization of Coupled Charge Device camera in light transmission systems provides a nearly instantaneous high-density array of spatial measurements over a very large dynamic range. The migration of NAPL and air spariging technique applied to remove NAPL in aquifer systems are typically two-phase flow problem. Because of the natural aquifer normally being heterogeneous, two 2-D sandboxes (Length55cm×width1.3cm×hight45cm) are set up to study the migration of gas and DNAPL in heterogeneous porous media based on light transmission method and its application in two-phase flow. Model D for water/gas system developed by Niemet and Selker (2001) and Model NW-A for water/NAPL system developed by Zhang et al. (2014) are applied for the calculation of fluid saturation in the two experiments, respectively. The gas injection experiments show that the gas moves upward in the irregular channels, piling up beneath the low permeability lenses and starting lateral movement. Bypassing the lenses, the gas moves upward and forms continuous distribution in the top of the sandbox. The faster of gas injects, the wider of gas migration will be. The DNAPL infiltration experiment shows that TCE mainly moves downward as the influence of gravity, stopping vertical infiltration when reaching the low permeability lenses because of its failure to overcome the capillary pressure. Then, TCE accumulates on the surface and starts transverse movement. Bypassing the

  4. A discontinuous Galerkin method for P-wave modeling in tilted TI media

    KAUST Repository

    Amler, Thomas; Alkhalifah, Tariq Ali; Hoteit, Ibrahim

    2014-01-01

    The acoustic approximation is an efficient alternative to the equations of elastodynamics for modeling Pwave propagation in weakly anisotropic media. We present a stable discontinuous Galerkin (DG) method for solving the acoustic approximation in tilted TI media (acoustic TI approximation). The acoustic TI approximation is considered as a modification of the equations of elastodynamics from which a modified energy is derived. The modified energy is obtained by eliminating the shear stress in the coordinates determined by the tilt angle and finding an energy for the remaining unknowns. This construction is valid if the medium is not elliptically anisotropic, a requirement frequently found in the literature. In the fully discrete setting, the modified energy is also conserved in time the presence of sharp contrasts in material parameters. By construction, the scheme can be coupled to the (fully) acoustic wave equation in the same way as the equations of elastodynamics. Hence, the number of unknowns can be reduced in acoustic regions. Our numerical examples confirm the conservation of energy in the discrete setting and the stability of the scheme.

  5. Comparing writing style feature-based classification methods for estimating user reputations in social media.

    Science.gov (United States)

    Suh, Jong Hwan

    2016-01-01

    In recent years, the anonymous nature of the Internet has made it difficult to detect manipulated user reputations in social media, as well as to ensure the qualities of users and their posts. To deal with this, this study designs and examines an automatic approach that adopts writing style features to estimate user reputations in social media. Under varying ways of defining Good and Bad classes of user reputations based on the collected data, it evaluates the classification performance of the state-of-art methods: four writing style features, i.e. lexical, syntactic, structural, and content-specific, and eight classification techniques, i.e. four base learners-C4.5, Neural Network (NN), Support Vector Machine (SVM), and Naïve Bayes (NB)-and four Random Subspace (RS) ensemble methods based on the four base learners. When South Korea's Web forum, Daum Agora, was selected as a test bed, the experimental results show that the configuration of the full feature set containing content-specific features and RS-SVM combining RS and SVM gives the best accuracy for classification if the test bed poster reputations are segmented strictly into Good and Bad classes by portfolio approach. Pairwise t tests on accuracy confirm two expectations coming from the literature reviews: first, the feature set adding content-specific features outperform the others; second, ensemble learning methods are more viable than base learners. Moreover, among the four ways on defining the classes of user reputations, i.e. like, dislike, sum, and portfolio, the results show that the portfolio approach gives the highest accuracy.

  6. An ensemble method for extracting adverse drug events from social media.

    Science.gov (United States)

    Liu, Jing; Zhao, Songzheng; Zhang, Xiaodi

    2016-06-01

    Because adverse drug events (ADEs) are a serious health problem and a leading cause of death, it is of vital importance to identify them correctly and in a timely manner. With the development of Web 2.0, social media has become a large data source for information on ADEs. The objective of this study is to develop a relation extraction system that uses natural language processing techniques to effectively distinguish between ADEs and non-ADEs in informal text on social media. We develop a feature-based approach that utilizes various lexical, syntactic, and semantic features. Information-gain-based feature selection is performed to address high-dimensional features. Then, we evaluate the effectiveness of four well-known kernel-based approaches (i.e., subset tree kernel, tree kernel, shortest dependency path kernel, and all-paths graph kernel) and several ensembles that are generated by adopting different combination methods (i.e., majority voting, weighted averaging, and stacked generalization). All of the approaches are tested using three data sets: two health-related discussion forums and one general social networking site (i.e., Twitter). When investigating the contribution of each feature subset, the feature-based approach attains the best area under the receiver operating characteristics curve (AUC) values, which are 78.6%, 72.2%, and 79.2% on the three data sets. When individual methods are used, we attain the best AUC values of 82.1%, 73.2%, and 77.0% using the subset tree kernel, shortest dependency path kernel, and feature-based approach on the three data sets, respectively. When using classifier ensembles, we achieve the best AUC values of 84.5%, 77.3%, and 84.5% on the three data sets, outperforming the baselines. Our experimental results indicate that ADE extraction from social media can benefit from feature selection. With respect to the effectiveness of different feature subsets, lexical features and semantic features can enhance the ADE extraction

  7. An artificial neural network method for lumen and media-adventitia border detection in IVUS.

    Science.gov (United States)

    Su, Shengran; Hu, Zhenghui; Lin, Qiang; Hau, William Kongto; Gao, Zhifan; Zhang, Heye

    2017-04-01

    Intravascular ultrasound (IVUS) has been well recognized as one powerful imaging technique to evaluate the stenosis inside the coronary arteries. The detection of lumen border and media-adventitia (MA) border in IVUS images is the key procedure to determine the plaque burden inside the coronary arteries, but this detection could be burdensome to the doctor because of large volume of the IVUS images. In this paper, we use the artificial neural network (ANN) method as the feature learning algorithm for the detection of the lumen and MA borders in IVUS images. Two types of imaging information including spatial, neighboring features were used as the input data to the ANN method, and then the different vascular layers were distinguished accordingly through two sparse auto-encoders and one softmax classifier. Another ANN was used to optimize the result of the first network. In the end, the active contour model was applied to smooth the lumen and MA borders detected by the ANN method. The performance of our approach was compared with the manual drawing method performed by two IVUS experts on 461 IVUS images from four subjects. Results showed that our approach had a high correlation and good agreement with the manual drawing results. The detection error of the ANN method close to the error between two groups of manual drawing result. All these results indicated that our proposed approach could efficiently and accurately handle the detection of lumen and MA borders in the IVUS images. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Multiscale Lattice Boltzmann method for flow simulations in highly heterogenous porous media

    KAUST Repository

    Li, Jun

    2013-01-01

    A lattice Boltzmann method (LBM) for flow simulations in highly heterogeneous porous media at both pore and Darcy scales is proposed in the paper. In the pore scale simulations, flow of two phases (e.g., oil and gas) or two immiscible fluids (e.g., water and oil) are modeled using cohesive or repulsive forces, respectively. The relative permeability can be computed using pore-scale simulations and seamlessly applied for intermediate and Darcy-scale simulations. A multiscale LBM that can reduce the computational complexity of existing LBM and transfer the information between different scales is implemented. The results of coarse-grid, reduced-order, simulations agree very well with the averaged results obtained using fine grid.

  9. A rapid method to estimate uranium using ionic liquid as extracting agent from basic aqueous media

    International Nuclear Information System (INIS)

    Prabhath Ravi, K.; Sathyapriya, R.S.; Rao, D.D.; Ghosh, S.K.

    2016-01-01

    Room temperature ionic liquids, as their name suggests are salts with a low melting point typically less than 100 °C and exist as liquid at room temperature. The common cationic parts of ionic liquids are imidazolium, pyridinium, pyrrolidinium, quaternary ammonium, or phosphonium ions, and common anionic parts are chloride, bromide, boron tetrafluorate, phosphorous hexafluorate, triflimide etc. The physical properties of ionic liquids can be tuned by choosing appropriate cations with differing alkyl chain lengths and anions. Application of ionic liquids in organic synthesis, liquid-liquid extractions, electrochemistry, catalysis, speciation studies, nuclear reprocessing is being studied extensively in recent times. In this paper a rapid method to estimate the uranium content in aqueous media by extraction with room temperature ionic liquid tricaprylammoniumthiosalicylate ((A- 336)(TS)) followed by liquid scintillation analysis is described. Re-extraction of uranium from ionic liquid phase to aqueous phase was also studied

  10. Study on the gain media with four energy level model using two dimensional FDTD method

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Bo; Sun, Bingbing; Xue, Hui; Xiao, Feng [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Huang, Zhixiang, E-mail: zxhuang@ahu.edu.cn [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Wu, Xianliang, E-mail: xlwu@ahu.edu.cn [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Department of Physics and Electronic Engineering, Hefei Normal University, Hefei 230061 (China)

    2013-08-15

    A four energy level model is applied to the gain media, which shows possible application to the complex metamaterials system due to its amplification effect. The coupled equations named polarization equation, rate equations of electronic population and Maxwell's equations are used to describe the coupling between the atoms and electromagnetic wave. Population inversion and lasing threshold are investigated using numerical simulations based on a novel finite-difference time-domain (FDTD) treatment of the optical field. The validations of the method are also tested. The numerical results show the good agreement with the classic lasing theory. Our numerical model can be used as an efficient design tool for investigating novel physical phenomena for new laser devices.

  11. Simulating Engineering Flows through Complex Porous Media via the Lattice Boltzmann Method

    Directory of Open Access Journals (Sweden)

    Vesselin Krassimirov Krastev

    2018-03-01

    Full Text Available In this paper, recent achievements in the application of the lattice Boltzmann method (LBM to complex fluid flows are reported. More specifically, we focus on flows through reactive porous media, such as the flow through the substrate of a selective catalytic reactor (SCR for the reduction of gaseous pollutants in the automotive field; pulsed-flow analysis through heterogeneous catalyst architectures; and transport and electro-chemical phenomena in microbial fuel cells (MFC for novel waste-to-energy applications. To the authors’ knowledge, this is the first known application of LBM modeling to the study of MFCs, which represents by itself a highly innovative and challenging research area. The results discussed here essentially confirm the capabilities of the LBM approach as a flexible and accurate computational tool for the simulation of complex multi-physics phenomena of scientific and technological interest, across physical scales.

  12. Generalized Multiscale Finite Element Methods for Wave Propagation in Heterogeneous Media

    KAUST Repository

    Chung, Eric T.

    2014-11-13

    Numerical modeling of wave propagation in heterogeneous media is important in many applications. Due to their complex nature, direct numerical simulations on the fine grid are prohibitively expensive. It is therefore important to develop efficient and accurate methods that allow the use of coarse grids. In this paper, we present a multiscale finite element method for wave propagation on a coarse grid. The proposed method is based on the generalized multiscale finite element method (GMsFEM) (see [Y. Efendiev, J. Galvis, and T. Hou, J. Comput. Phys., 251 (2012), pp. 116--135]). To construct multiscale basis functions, we start with two snapshot spaces in each coarse-grid block, where one represents the degrees of freedom on the boundary and the other represents the degrees of freedom in the interior. We use local spectral problems to identify important modes in each snapshot space. These local spectral problems are different from each other and their formulations are based on the analysis. To the best of knowledge, this is the first time that multiple snapshot spaces and multiple spectral problems are used and necessary for efficient computations. Using the dominant modes from local spectral problems, multiscale basis functions are constructed to represent the solution space locally within each coarse block. These multiscale basis functions are coupled via the symmetric interior penalty discontinuous Galerkin method which provides a block diagonal mass matrix and, consequently, results in fast computations in an explicit time discretization. Our methods\\' stability and spectral convergence are rigorously analyzed. Numerical examples are presented to show our methods\\' performance. We also test oversampling strategies. In particular, we discuss how the modes from different snapshot spaces can affect the proposed methods\\' accuracy.

  13. Optimization of chemically defined cell culture media--replacing fetal bovine serum in mammalian in vitro methods

    DEFF Research Database (Denmark)

    van der Valk, J; Brunner, D; De Smet, K

    2010-01-01

    with an undefined and variable composition. Defined media supplements are commercially available for some cell types. However, information on the formulation by the companies is often limited and such supplements can therefore not be regarded as completely defined. The development of defined media is difficult......, reproducible and reduce the use of experimental animals. Good cell culture practice (GCCP) is an attempt to develop a common standard for in vitro methods. The implementation of the use of chemically defined media is part of the GCCP. This will decrease the dependence on animal serum, a supplement...... and often takes place in isolation. A workshop was organised in 2009 in Copenhagen to discuss strategies to improve the development and use of serum-free defined media. In this report, the results from the meeting are discussed and the formulation of a basic serum-free medium is suggested. Furthermore...

  14. Hierarchical multiscale modeling for flows in fractured media using generalized multiscale finite element method

    KAUST Repository

    Efendiev, Yalchin R.

    2015-06-05

    In this paper, we develop a multiscale finite element method for solving flows in fractured media. Our approach is based on generalized multiscale finite element method (GMsFEM), where we represent the fracture effects on a coarse grid via multiscale basis functions. These multiscale basis functions are constructed in the offline stage via local spectral problems following GMsFEM. To represent the fractures on the fine grid, we consider two approaches (1) discrete fracture model (DFM) (2) embedded fracture model (EFM) and their combination. In DFM, the fractures are resolved via the fine grid, while in EFM the fracture and the fine grid block interaction is represented as a source term. In the proposed multiscale method, additional multiscale basis functions are used to represent the long fractures, while short-size fractures are collectively represented by a single basis functions. The procedure is automatically done via local spectral problems. In this regard, our approach shares common concepts with several approaches proposed in the literature as we discuss. We would like to emphasize that our goal is not to compare DFM with EFM, but rather to develop GMsFEM framework which uses these (DFM or EFM) fine-grid discretization techniques. Numerical results are presented, where we demonstrate how one can adaptively add basis functions in the regions of interest based on error indicators. We also discuss the use of randomized snapshots (Calo et al. Randomized oversampling for generalized multiscale finite element methods, 2014), which reduces the offline computational cost.

  15. The Indirect Boundary Element Method (IBEM) for Seismic Response of Topographical Irregularities in Layered Media

    Science.gov (United States)

    Contreras Zazueta, M. A.; Perton, M.; Sanchez-Sesma, F. J.; Sánchez-Alvaro, E.

    2013-12-01

    The seismic hazard assessment of extended developments, such as a dam, a bridge or a pipeline, needs the strong ground motion simulation taking into account the effects of surface geology. In many cases the incoming wave field can be obtained from attenuation relations or simulations for layered media using Discrete Wave Number (DWN). Sometimes there is a need to include in simulations the seismic source as well. A number of methods to solve these problems have been developed. Among them the Finite Element and Finite Difference Methods (FEM and FDM) are generally preferred because of the facility of use. Nevertheless, the analysis of realistic dynamic loading induced by earthquakes requires a thinner mesh of the entire domain to consider high frequencies. Consequently this may imply a high computational cost. The Indirect Boundary Element Method (IBEM) can also be employed. Here it is used to study the response of a site to historical seismic activity. This method is particularly suited to model wave propagation through wide areas as it requires only the meshing of boundaries. Moreover, it is well suited to represent finely the diffraction that can occur on a fault. However, the IBEM has been applied mainly to simple geometrical configurations. In this communication significant refinements of the formulation are presented. Using IBEM we can simulate wave propagation in complex geometrical configurations such as a stratified medium crossed by thin faults or having a complex topography. Two main developments are here described; one integrates the DWN method inside the IBEM in order to represent the Green's functions of stratified media with relatively low computational cost but assuming unbounded parallel flat layers, and the other is the extension of IBEM to deal with multi-regions in contact which allows more versatility with a higher computational cost compared to the first one but still minor to an equivalent FEM formulation. The two approaches are fully

  16. Evaluation of social media channel preference for student engagement improvement in universities using entropy and TOPSIS method

    Directory of Open Access Journals (Sweden)

    Meyliana Meyliana

    2015-11-01

    Full Text Available Purpose: To analyze students’ social media preference in order to improve student engagement with university by examining social media implementation quality in terms of information and service quality. Design/methodology/approach: Research methodology is started with the hierarchy creation of student engagement with university which then translated into questionnaire. This questionnaire was distributed to 58 universities in Jakarta (Indonesia’s capital. The questionnaire result was analyzed with entropy and TOPSIS method. Findings: In social media implementation quality, information quality is more important than service quality because in social media, a good information quality is really relevant with the usefulness and comprehensiveness of the information. On the other hand regarding service quality, the system availability will help students in their interaction process with university, on top of the service’s efficiency and fulfillment. This directly impacts the cooperation between students, active learning process, and students’ expectation. The social medias students preferred to improve student engagement with universities respectively are LINE, Facebook, Twitter, Wiki, Blog, Instagram, YouTube, Path, LinkedIn, and Podcast. Research limitations/implications: Social media’s role is not only to create student engagement in the learning process, but also other aspects included by Chickering & Gamson (1987. Practical implications: The Social CRM channel shift from electronic into social media shows that social media holds an important role for university since it eases up the communication between university and the students. The good social media management has been an issue that needs to be solved by university by creating a unit or delegate a person that can manage the social media correctly and quickly so the students feel that they get the good service they want. Originality/value: The other researches focus on observing

  17. Identification and root cause analysis of cell culture media precipitates in the viral deactivation treatment with high-temperature/short-time method.

    Science.gov (United States)

    Cao, Xiaolin; Stimpfl, Gregory; Wen, Zai-Qing; Frank, Gregory; Hunter, Glenn

    2013-01-01

    High-temperature/short-time (HTST) treatment of cell culture media is one of the proven techniques used in the biopharmaceutical manufacturing industry for the prevention and mitigation of media viral contamination. With the HTST method, the formulated media is pasteurized (virus-deactivated) by heating and pumping the media continuously through the preset high-temperature holding tubes to achieve a specified period of time at a specific temperature. Recently, during the evaluation and implementation of HTST method in multiple Amgen, Inc. manufacturing facilities, media precipitates were observed in the tests of HTST treatments. The media precipitates may have adverse consequences such as clogging the HTST system, altering operating conditions and compromising the efficacy of viral deactivation, and ultimately affecting the media composition and cell growth. In this study, we report the identification of the composition of media precipitates from multiple media HTST runs using combined microspectroscopic methods including Raman, Fourier transform infrared spectroscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy. The major composition in the precipitates was determined to be metal phosphates, including calcium phosphate, magnesium phosphate, and iron (III) phosphate. Based on the composition, stoichiometry, and root-cause study of media precipitations, methods were implemented for the mitigation and prevention of the occurrence of the media precipitation. Viral contamination in cell culture media is an important issue in the biopharmaceutical manufacturing industry and may have serious consequences on product quality, efficacy, and safety. High-temperature/short-time (HTST) treatment of cell culture media is one of the proven techniques used in the industry for the prevention and mitigation of media viral contamination. With the HTST method, the formulated media is pasteurized (virus-deactivated) by heating at preset conditions. This

  18. Calculation of the permeability in porous media using the lattice Boltzmann method

    International Nuclear Information System (INIS)

    Eshghinejadfard, Amir; Daróczy, László; Janiga, Gábor; Thévenin, Dominique

    2016-01-01

    Highlights: • Lattice Boltzmann simulation of fluid flow in porous media delivers a high accuracy. • Domain size, relaxation time and force scheme affect the calculated permeability. • Multiple relaxation time model shows very low viscosity dependence as compared to single relaxation time. • The choice of relaxation time and force scheme is a trade-off between the required accuracy and computational cost. - Abstract: In this paper, the lattice Boltzmann method (LBM) is used to simulate three-dimensional laminar flows in porous media and to calculate the associated permeability. An in-house, parallelized code using the message passing interface technique is employed for the study. Three different flow configurations are studied: first, by manually specifying solid cells in a face-centered cube (FCC); then, doing the same in a body-centered cube (BCC); and finally by reading the solid cells for a real 3D geometry from a set of experimental 2D computed tomography images. In all simulations, the Reynolds number is kept well below 1. It was found that the current LBM simulations yield good estimates for the permeability value. The impact of the employed force scheme and single- or multiple-relaxation time (SRT, MRT) was also studied. Although each force scheme (Guo-SRT, Guo-MRT and Shan-Chen-SRT) may show better results in some regions, the strong dependency of SRT models on relaxation time suggests that the proper choice of the force scheme, relaxation time and domain resolution is a compromise between the required accuracy and computational cost. First, higher resolutions lead as expected to increasingly accurate results but requires more computational cost and time. Second, the MRT model shows a lower viscosity dependence in comparison with SRT models but is somewhat slower. Also, the results are more sensitive to the relaxation time value for coarser domains. Furthermore, lower relaxation times necessitate a higher number of iterations to reach the steady

  19. Internet and Social Media Access Among Youth Experiencing Homelessness: Mixed-Methods Study.

    Science.gov (United States)

    VonHoltz, Lauren A Houdek; Frasso, Rosemary; Golinkoff, Jesse M; Lozano, Alicia J; Hanlon, Alexandra; Dowshen, Nadia

    2018-05-22

    leisure or entertainment activities. While homeless youth experience changes in the frequency, amount of time, and specific uses of the internet and social media, study participants were able to access the internet regularly. The internet was used to search health-related topics. Given the importance of smartphones in accessing the internet, mobile-optimized websites may be an effective method for reaching this group. ©Lauren A Houdek VonHoltz, Rosemary Frasso, Jesse M Golinkoff, Alicia J Lozano, Alexandra Hanlon, Nadia Dowshen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 22.05.2018.

  20. Analysis of transport of collimated radiation in a participating media using the lattice Boltzmann method

    International Nuclear Information System (INIS)

    Mishra, Subhash C.; Vernekar, Rohan Ranganath

    2012-01-01

    Application of the lattice Boltzmann method (LBM) recently proposed by Asinari et al. [Asinari P, Mishra SC, Borchiellini R. A lattice Boltzmann formulation to the analysis of radiative heat transfer problems in a participating medium. Numer Heat Transfer B 2010; 57:126–146] is extended to the analysis of transport of collimated radiation in a planar participating medium. To deal with azimuthally symmetric radiation in planar medium, a new lattice structure for the LBM is used. The transport of the collimated component in the medium is analysed by two different, viz., flux splitting and direct approaches. For different angles of incidence of the collimated radiation, the LBM formulation is tested for the effects of the extinction coefficient, the anisotropy factor, and the boundary emissivities on heat flux and emissive power distributions. Results are compared with the benchmark results obtained using the finite volume method. Both the approaches in LBM provide accurate results. -- Highlights: ► Transport of collimated radiation in participating media is studied. ► Usage of Lattice Boltzmann method (LBM) is extended in this study. ► In LBM, flux splitting and direct approaches are proposed. ► Effects of various parameters are studied on heat flux and temperature profiles. ► In all cases, LBM provides correct results.

  1. Expanded Mixed Multiscale Finite Element Methods and Their Applications for Flows in Porous Media

    KAUST Repository

    Jiang, L.

    2012-01-01

    We develop a family of expanded mixed multiscale finite element methods (MsFEMs) and their hybridizations for second-order elliptic equations. This formulation expands the standard mixed multiscale finite element formulation in the sense that four unknowns (hybrid formulation) are solved simultaneously: pressure, gradient of pressure, velocity, and Lagrange multipliers. We use multiscale basis functions for both the velocity and the gradient of pressure. In the expanded mixed MsFEM framework, we consider both separable and nonseparable spatial scales. Specifically, we analyze the methods in three categories: periodic separable scales, G-convergent separable scales, and a continuum of scales. When there is no scale separation, using some global information can significantly improve the accuracy of the expanded mixed MsFEMs. We present a rigorous convergence analysis of these methods that includes both conforming and nonconforming formulations. Numerical results are presented for various multiscale models of flow in porous media with shale barriers that illustrate the efficacy of the proposed family of expanded mixed MsFEMs. © 2012 Society for Industrial and Applied Mathematics.

  2. Hybrid finite volume/ finite element method for radiative heat transfer in graded index media

    Science.gov (United States)

    Zhang, L.; Zhao, J. M.; Liu, L. H.; Wang, S. Y.

    2012-09-01

    The rays propagate along curved path determined by the Fermat principle in the graded index medium. The radiative transfer equation in graded index medium (GRTE) contains two specific redistribution terms (with partial derivatives to the angular coordinates) accounting for the effect of the curved ray path. In this paper, the hybrid finite volume with finite element method (hybrid FVM/FEM) (P.J. Coelho, J. Quant. Spectrosc. Radiat. Transf., vol. 93, pp. 89-101, 2005) is extended to solve the radiative heat transfer in two-dimensional absorbing-emitting-scattering graded index media, in which the spatial discretization is carried out using a FVM, while the angular discretization is by a FEM. The FEM angular discretization is demonstrated to be preferable in dealing with the redistribution terms in the GRTE. Two stiff matrix assembly schemes of the angular FEM discretization, namely, the traditional assembly approach and a new spherical assembly approach (assembly on the unit sphere of the solid angular space), are discussed. The spherical assembly scheme is demonstrated to give better results than the traditional assembly approach. The predicted heat flux distributions and temperature distributions in radiative equilibrium are determined by the proposed method and compared with the results available in other references. The proposed hybrid FVM/FEM method can predict the radiative heat transfer in absorbing-emitting-scattering graded index medium with good accuracy.

  3. Hybrid finite volume/ finite element method for radiative heat transfer in graded index media

    International Nuclear Information System (INIS)

    Zhang, L.; Zhao, J.M.; Liu, L.H.; Wang, S.Y.

    2012-01-01

    The rays propagate along curved path determined by the Fermat principle in the graded index medium. The radiative transfer equation in graded index medium (GRTE) contains two specific redistribution terms (with partial derivatives to the angular coordinates) accounting for the effect of the curved ray path. In this paper, the hybrid finite volume with finite element method (hybrid FVM/FEM) (P.J. Coelho, J. Quant. Spectrosc. Radiat. Transf., vol. 93, pp. 89-101, 2005) is extended to solve the radiative heat transfer in two-dimensional absorbing-emitting-scattering graded index media, in which the spatial discretization is carried out using a FVM, while the angular discretization is by a FEM. The FEM angular discretization is demonstrated to be preferable in dealing with the redistribution terms in the GRTE. Two stiff matrix assembly schemes of the angular FEM discretization, namely, the traditional assembly approach and a new spherical assembly approach (assembly on the unit sphere of the solid angular space), are discussed. The spherical assembly scheme is demonstrated to give better results than the traditional assembly approach. The predicted heat flux distributions and temperature distributions in radiative equilibrium are determined by the proposed method and compared with the results available in other references. The proposed hybrid FVM/FEM method can predict the radiative heat transfer in absorbing-emitting-scattering graded index medium with good accuracy.

  4. Investigation of Condensed Media in Weak Fields by the Method of Nuclear Magnetic Resonance

    Science.gov (United States)

    Davydov, V. V.; Myazin, N. S.; Dudkin, V. I.; Velichko, E. N.

    2018-05-01

    A compact design of a rapid-response nuclear magnetic spectrometer for investigation of condensed media in weak fields is reported. As a result of investigation of different condensed media, special features of recording a nuclear magnetic resonance (NMR) signal in a weak magnetic field from a small volume of the medium under study are established. For the first time the NMR absorption spectra of condensed media in a weak field are collected. Based on the results of experimental studies, the potential of using a compact NMR-spectrometer for condensed media monitoring in a rapid response mode is determined.

  5. A numerical method for a model of two-phase flow in a coupled free flow and porous media system

    KAUST Repository

    Chen, Jie; Sun, Shuyu; Wang, Xiaoping

    2014-01-01

    In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.

  6. A numerical method for a model of two-phase flow in a coupled free flow and porous media system

    KAUST Repository

    Chen, Jie

    2014-07-01

    In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.

  7. Media Flow

    DEFF Research Database (Denmark)

    Kabel, Lars

    2016-01-01

    News and other kinds of journalistic stories, 16-17 hours a day, all year round, on all platforms, also the moderated social media. The key research thesis behind this article is that the continuous and speedy stream of news stories and media content now is becoming the centre of the production...... processes and the value creation in converged multimedia newsrooms. The article identify new methods and discuss editorial challenges in handling media flow....

  8. Physics-based hybrid method for multiscale transport in porous media

    Science.gov (United States)

    Yousefzadeh, Mehrdad; Battiato, Ilenia

    2017-09-01

    Despite advancements in the development of multiscale models for flow and reactive transport in porous media, the accurate, efficient and physics-based coupling of multiple scales in hybrid models remains a major theoretical and computational challenge. Improving the predictivity of macroscale predictions by means of multiscale algorithms relative to classical at-scale models is the primary motivation for the development of multiscale simulators. Yet, very few are the quantitative studies that explicitly address the predictive capability of multiscale coupling algorithms as it is still generally not possible to have a priori estimates of the errors that are present when complex flow processes are modeled. We develop a nonintrusive pore-/continuum-scale hybrid model whose coupling error is bounded by the upscaling error, i.e. we build a predictive tightly coupled multiscale scheme. This is accomplished by slightly enlarging the subdomain where continuum-scale equations are locally invalid and analytically defining physics-based coupling conditions at the interfaces separating the two computational sub-domains, while enforcing state variable and flux continuity. The proposed multiscale coupling approach retains the advantages of domain decomposition approaches, including the use of existing solvers for each subdomain, while it gains flexibility in the choice of the numerical discretization method and maintains the coupling errors bounded by the upscaling error. We implement the coupling in finite volumes and test the proposed method by modeling flow and transport through a reactive channel and past an array of heterogeneously reactive cylinders.

  9. First-arrival traveltime tomography for anisotropic media using the adjoint-state method

    KAUST Repository

    Waheed, Umair bin

    2016-05-27

    Traveltime tomography using transmission data has been widely used for static corrections and for obtaining near-surface models for seismic depth imaging. More recently, it is also being used to build initial models for full-waveform inversion. The classic traveltime tomography approach based on ray tracing has difficulties in handling large data sets arising from current seismic acquisition surveys. Some of these difficulties can be addressed using the adjoint-state method, due to its low memory requirement and numerical efficiency. By coupling the gradient computation to nonlinear optimization, it avoids the need for explicit computation of the Fréchet derivative matrix. Furthermore, its cost is equivalent to twice the solution of the forward-modeling problem, irrespective of the size of the input data. The presence of anisotropy in the subsurface has been well established during the past few decades. The improved seismic images obtained by incorporating anisotropy into the seismic processing workflow justify the effort. However, previous literature on the adjoint-state method has only addressed the isotropic approximation of the subsurface. We have extended the adjoint-state technique for first-arrival traveltime tomography to vertical transversely isotropic (VTI) media. Because δ is weakly resolvable from surface seismic alone, we have developed the mathematical framework and procedure to invert for vNMO and η. Our numerical tests on the VTI SEAM model demonstrate the ability of the algorithm to invert for near-surface model parameters and reveal the accuracy achievable by the algorithm.

  10. Nonuniform grid implicit spatial finite difference method for acoustic wave modeling in tilted transversely isotropic media

    KAUST Repository

    Chu, Chunlei

    2012-01-01

    Discrete earth models are commonly represented by uniform structured grids. In order to ensure accurate numerical description of all wave components propagating through these uniform grids, the grid size must be determined by the slowest velocity of the entire model. Consequently, high velocity areas are always oversampled, which inevitably increases the computational cost. A practical solution to this problem is to use nonuniform grids. We propose a nonuniform grid implicit spatial finite difference method which utilizes nonuniform grids to obtain high efficiency and relies on implicit operators to achieve high accuracy. We present a simple way of deriving implicit finite difference operators of arbitrary stencil widths on general nonuniform grids for the first and second derivatives and, as a demonstration example, apply these operators to the pseudo-acoustic wave equation in tilted transversely isotropic (TTI) media. We propose an efficient gridding algorithm that can be used to convert uniformly sampled models onto vertically nonuniform grids. We use a 2D TTI salt model to demonstrate its effectiveness and show that the nonuniform grid implicit spatial finite difference method can produce highly accurate seismic modeling results with enhanced efficiency, compared to uniform grid explicit finite difference implementations. © 2011 Elsevier B.V.

  11. First-arrival traveltime tomography for anisotropic media using the adjoint-state method

    KAUST Repository

    Waheed, Umair bin; Flagg, Garret; Yarman, Can Evren

    2016-01-01

    Traveltime tomography using transmission data has been widely used for static corrections and for obtaining near-surface models for seismic depth imaging. More recently, it is also being used to build initial models for full-waveform inversion. The classic traveltime tomography approach based on ray tracing has difficulties in handling large data sets arising from current seismic acquisition surveys. Some of these difficulties can be addressed using the adjoint-state method, due to its low memory requirement and numerical efficiency. By coupling the gradient computation to nonlinear optimization, it avoids the need for explicit computation of the Fréchet derivative matrix. Furthermore, its cost is equivalent to twice the solution of the forward-modeling problem, irrespective of the size of the input data. The presence of anisotropy in the subsurface has been well established during the past few decades. The improved seismic images obtained by incorporating anisotropy into the seismic processing workflow justify the effort. However, previous literature on the adjoint-state method has only addressed the isotropic approximation of the subsurface. We have extended the adjoint-state technique for first-arrival traveltime tomography to vertical transversely isotropic (VTI) media. Because δ is weakly resolvable from surface seismic alone, we have developed the mathematical framework and procedure to invert for vNMO and η. Our numerical tests on the VTI SEAM model demonstrate the ability of the algorithm to invert for near-surface model parameters and reveal the accuracy achievable by the algorithm.

  12. Mapping the Daily Media Round: Novel Methods for Understanding Families' Mobile Technology Use

    Science.gov (United States)

    Taylor, Katie Headrick; Takeuchi, Lori; Stevens, Reed

    2018-01-01

    The pervasiveness of mobile devices in families' homes has dramatically changed the physical and temporal arrangement of co-viewing media content; the representative image of American families seated around a TV set is an anachronism. But understanding and describing contemporary co-participation arrangements around digital media is challenging…

  13. Media Literacy as an Educational Method for Addressing College Women's Body Image Issues

    Science.gov (United States)

    Chambers, Karen L.; Alexander, Susan M.

    2007-01-01

    This study assesses the effectiveness of media literacy in the college classroom by comparing two modalities of learning, watching a video versus reading a text. The research questions guiding this project are: as teachers can we facilitate critical awareness among our students in order to alter the way women appropriate media images to evaluate…

  14. A proposal on alternative sampling-based modeling method of spherical particles in stochastic media for Monte Carlo simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Song Hyun; Lee, Jae Yong; KIm, Do Hyun; Kim, Jong Kyung [Dept. of Nuclear Engineering, Hanyang University, Seoul (Korea, Republic of); Noh, Jae Man [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-08-15

    Chord length sampling method in Monte Carlo simulations is a method used to model spherical particles with random sampling technique in a stochastic media. It has received attention due to the high calculation efficiency as well as user convenience; however, a technical issue regarding boundary effect has been noted. In this study, after analyzing the distribution characteristics of spherical particles using an explicit method, an alternative chord length sampling method is proposed. In addition, for modeling in finite media, a correction method of the boundary effect is proposed. Using the proposed method, sample probability distributions and relative errors were estimated and compared with those calculated by the explicit method. The results show that the reconstruction ability and modeling accuracy of the particle probability distribution with the proposed method were considerably high. Also, from the local packing fraction results, the proposed method can successfully solve the boundary effect problem. It is expected that the proposed method can contribute to the increasing of the modeling accuracy in stochastic media.

  15. A proposal on alternative sampling-based modeling method of spherical particles in stochastic media for Monte Carlo simulation

    International Nuclear Information System (INIS)

    Kim, Song Hyun; Lee, Jae Yong; KIm, Do Hyun; Kim, Jong Kyung; Noh, Jae Man

    2015-01-01

    Chord length sampling method in Monte Carlo simulations is a method used to model spherical particles with random sampling technique in a stochastic media. It has received attention due to the high calculation efficiency as well as user convenience; however, a technical issue regarding boundary effect has been noted. In this study, after analyzing the distribution characteristics of spherical particles using an explicit method, an alternative chord length sampling method is proposed. In addition, for modeling in finite media, a correction method of the boundary effect is proposed. Using the proposed method, sample probability distributions and relative errors were estimated and compared with those calculated by the explicit method. The results show that the reconstruction ability and modeling accuracy of the particle probability distribution with the proposed method were considerably high. Also, from the local packing fraction results, the proposed method can successfully solve the boundary effect problem. It is expected that the proposed method can contribute to the increasing of the modeling accuracy in stochastic media

  16. A second order radiative transfer equation and its solution by meshless method with application to strongly inhomogeneous media

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, J.M., E-mail: jmzhao@hit.edu.cn [School of Energy Science and Engineering, Harbin Institute of Technology, 92 West Dazhi Street, Harbin 150001, People' s Republic of China (China); Tan, J.Y., E-mail: tanjy@hit.edu.cn [School of Auto Engineering, Harbin Institute of Technology at Weihai, 2 West Wenhua Road, Weihai 264209, People' s Republic of China (China); Liu, L.H., E-mail: lhliu@hit.edu.cn [School of Energy Science and Engineering, Harbin Institute of Technology, 92 West Dazhi Street, Harbin 150001, People' s Republic of China (China); School of Auto Engineering, Harbin Institute of Technology at Weihai, 2 West Wenhua Road, Weihai 264209, People' s Republic of China (China)

    2013-01-01

    A new second order form of radiative transfer equation (named MSORTE) is proposed, which overcomes the singularity problem of a previously proposed second order radiative transfer equation [J.E. Morel, B.T. Adams, T. Noh, J.M. McGhee, T.M. Evans, T.J. Urbatsch, Spatial discretizations for self-adjoint forms of the radiative transfer equations, J. Comput. Phys. 214 (1) (2006) 12-40 (where it was termed SAAI), J.M. Zhao, L.H. Liu, Second order radiative transfer equation and its properties of numerical solution using finite element method, Numer. Heat Transfer B 51 (2007) 391-409] in dealing with inhomogeneous media where some locations have very small/zero extinction coefficient. The MSORTE contains a naturally introduced diffusion (or second order) term which provides better numerical property than the classic first order radiative transfer equation (RTE). The stability and convergence characteristics of the MSORTE discretized by central difference scheme is analyzed theoretically, and the better numerical stability of the second order form radiative transfer equations than the RTE when discretized by the central difference type method is proved. A collocation meshless method is developed based on the MSORTE to solve radiative transfer in inhomogeneous media. Several critical test cases are taken to verify the performance of the presented method. The collocation meshless method based on the MSORTE is demonstrated to be capable of stably and accurately solve radiative transfer in strongly inhomogeneous media, media with void region and even with discontinuous extinction coefficient.

  17. Method, apparatus, and system for utilizing augmented reality to improve surgery

    KAUST Repository

    Cali, Corrado

    2016-10-13

    A method, apparatus, and computer readable medium are provided for utilizing augmented reality visualization to assist surgery. An example method includes generating a three dimensional reconstruction of an image stack representing a target area of a patient, and superimposing, by a head-mounted display, a projection of the three dimensional reconstruction onto a field of view of a user. The method further includes maintaining alignment between the projection and the user\\'s actual view of the target area using a plurality of fiducial markers associated with the target area. In some embodiments, the method further includes scanning the target area to generate the image stack.

  18. Analysis of a combined mixed finite element and discontinuous Galerkin method for incompressible two-phase flow in porous media

    KAUST Repository

    Kou, Jisheng; Sun, Shuyu

    2013-01-01

    We analyze a combined method consisting of the mixed finite element method for pressure equation and the discontinuous Galerkin method for saturation equation for the coupled system of incompressible two-phase flow in porous media. The existence and uniqueness of numerical solutions are established under proper conditions by using a constructive approach. Optimal error estimates in L2(H1) for saturation and in L∞(H(div)) for velocity are derived. Copyright © 2013 John Wiley & Sons, Ltd.

  19. Analysis of a combined mixed finite element and discontinuous Galerkin method for incompressible two-phase flow in porous media

    KAUST Repository

    Kou, Jisheng

    2013-06-20

    We analyze a combined method consisting of the mixed finite element method for pressure equation and the discontinuous Galerkin method for saturation equation for the coupled system of incompressible two-phase flow in porous media. The existence and uniqueness of numerical solutions are established under proper conditions by using a constructive approach. Optimal error estimates in L2(H1) for saturation and in L∞(H(div)) for velocity are derived. Copyright © 2013 John Wiley & Sons, Ltd.

  20. An Efficient Hierarchical Multiscale Finite Element Method for Stokes Equations in Slowly Varying Media

    KAUST Repository

    Brown, Donald L.

    2013-01-01

    Direct numerical simulation (DNS) of fluid flow in porous media with many scales is often not feasible, and an effective or homogenized description is more desirable. To construct the homogenized equations, effective properties must be computed. Computation of effective properties for nonperiodic microstructures can be prohibitively expensive, as many local cell problems must be solved for different macroscopic points. In addition, the local problems may also be computationally expensive. When the microstructure varies slowly, we develop an efficient numerical method for two scales that achieves essentially the same accuracy as that for the full resolution solve of every local cell problem. In this method, we build a dense hierarchy of macroscopic grid points and a corresponding nested sequence of approximation spaces. Essentially, solutions computed in high accuracy approximation spaces at select points in the the hierarchy are used as corrections for the error of the lower accuracy approximation spaces at nearby macroscopic points. We give a brief overview of slowly varying media and formal Stokes homogenization in such domains. We present a general outline of the algorithm and list reasonable and easily verifiable assumptions on the PDEs, geometry, and approximation spaces. With these assumptions, we achieve the same accuracy as the full solve. To demonstrate the elements of the proof of the error estimate, we use a hierarchy of macro-grid points in [0, 1]2 and finite element (FE) approximation spaces in [0, 1]2. We apply this algorithm to Stokes equations in a slowly porous medium where the microstructure is obtained from a reference periodic domain by a known smooth map. Using the arbitrary Lagrange-Eulerian (ALE) formulation of the Stokes equations (cf. [G. P. Galdi and R. Rannacher, Fundamental Trends in Fluid-Structure Interaction, Contemporary Challenges in Mathematical Fluid Dynamics and Its Applications 1, World Scientific, Singapore, 2010]), we obtain

  1. Project-Based Learning Using Discussion and Lesson-Learned Methods via Social Media Model for Enhancing Problem Solving Skills

    Science.gov (United States)

    Jewpanich, Chaiwat; Piriyasurawong, Pallop

    2015-01-01

    This research aims to 1) develop the project-based learning using discussion and lesson-learned methods via social media model (PBL-DLL SoMe Model) used for enhancing problem solving skills of undergraduate in education student, and 2) evaluate the PBL-DLL SoMe Model used for enhancing problem solving skills of undergraduate in education student.…

  2. How U.S. children's hospitals use social media: A mixed methods study.

    Science.gov (United States)

    Wong, Charlene A; Ostapovich, Gabrielle; Kramer-Golinkoff, Emily; Griffis, Heather; Asch, David A; Merchant, Raina M

    2016-03-01

    Social media provide new channels for hospitals to engage with communities, a goal of increasing importance as non-profit hospitals face stricter definitions of community benefit under the Affordable Care Act. We describe the variability in social media presence among US children's hospitals and the distribution of their Facebook content curation. Social media data from freestanding children's hospitals were extracted from September-November 2013. Social media adoption was reviewed for each hospital-generated Facebook, Twitter, YouTube, Google+ and Pinterest platform. Facebook page (number of Likes) and Twitter account (number of followers) engagement were examined by hospital characteristics. Facebook posts from each hospital over a 6-week period were thematically characterized. We reviewed 5 social media platforms attributed to 45 children's hospitals and 2004 associated Facebook posts. All hospitals maintained Facebook and Twitter accounts and most used YouTube (82%), Google+ (53%) and Pinterest (69%). Larger hospitals were more often high performers for Facebook (67% versus 10%, pSocial media adoption by US children's hospitals was widespread. Beyond its traditional marketing role, social media can serve as a conduit for health education, engagement with communities, including community benefit. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. A review of social media methods and lessons learned from the National Children's Study.

    Science.gov (United States)

    Burke-Garcia, Amelia; Winseck, Kate; Jouvenal, Leslie Cooke; Hubble, David; Kulbicki, Kathryn M

    2017-08-01

    Given the reach and influence of social media, the National Children's Study Vanguard Study evaluated the feasibility, acceptability, and cost of using social media to support participant retention. We describe a social media experiment designed to assess the impact of social media on participant retention, discuss several key considerations for integrating social media into longitudinal research, and review factors that may influence engagement in research-related social media. User participation varied but was most active when at launch. During the short life of the private online community, a total of 39 participants joined. General enthusiasm about the prospect of the online community was indicated. There were many lessons learned throughout the process in areas such as privacy, security, and Institutional Review Board clearance. These are described in detail. The opportunity to engage participants in longitudinal research using online social networks is enticing; however, more research is needed to consider the feasibility of their use in an ongoing manner. Recommendations are presented for future research seeking to use social media to improve retention in longitudinal research.

  4. Development of Methods for Obtaining Position Image and Chemical Binding Information from Flow Experiments of Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Haugan, Are

    1998-12-01

    Existing oil reservoirs might be more fully exploited if the properties of the flow of oil and water in porous media were better known. In laboratory experiments it is important to collect as much information as possible to make a descriptive model of the system, including position imaging and chemical binding information. This thesis develops nuclear methods for obtaining position image and chemical binding information from flow experiments of porous media. A combined positron emission tomography and single photon emission computed tomography system to obtain position images, and a time-differential perturbed angular correlation system to obtain chemical binding information, have been built and thoroughly tested. 68 refs., 123 figs., 14 tabs.

  5. Upscaled Lattice Boltzmann Method for Simulations of Flows in Heterogeneous Porous Media

    Directory of Open Access Journals (Sweden)

    Jun Li

    2017-01-01

    Full Text Available An upscaled Lattice Boltzmann Method (LBM for flow simulations in heterogeneous porous media at the Darcy scale is proposed in this paper. In the Darcy-scale simulations, the Shan-Chen force model is used to simplify the algorithm. The proposed upscaled LBM uses coarser grids to represent the average effects of the fine-grid simulations. In the upscaled LBM, each coarse grid represents a subdomain of the fine-grid discretization and the effective permeability with the reduced-order models is proposed as we coarsen the grid. The effective permeability is computed using solutions of local problems (e.g., by performing local LBM simulations on the fine grids using the original permeability distribution and used on the coarse grids in the upscaled simulations. The upscaled LBM that can reduce the computational cost of existing LBM and transfer the information between different scales is implemented. The results of coarse-grid, reduced-order, simulations agree very well with averaged results obtained using a fine grid.

  6. Upscaled Lattice Boltzmann Method for Simulations of Flows in Heterogeneous Porous Media

    KAUST Repository

    Li, Jun

    2017-02-16

    An upscaled Lattice Boltzmann Method (LBM) for flow simulations in heterogeneous porous media at the Darcy scale is proposed in this paper. In the Darcy-scale simulations, the Shan-Chen force model is used to simplify the algorithm. The proposed upscaled LBM uses coarser grids to represent the average effects of the fine-grid simulations. In the upscaled LBM, each coarse grid represents a subdomain of the fine-grid discretization and the effective permeability with the reduced-order models is proposed as we coarsen the grid. The effective permeability is computed using solutions of local problems (e.g., by performing local LBM simulations on the fine grids using the original permeability distribution) and used on the coarse grids in the upscaled simulations. The upscaled LBM that can reduce the computational cost of existing LBM and transfer the information between different scales is implemented. The results of coarse-grid, reduced-order, simulations agree very well with averaged results obtained using a fine grid.

  7. The Use of Social Media Communications in Brain Aneurysms and Subarachnoid Hemorrhage: A Mixed-Method Analysis.

    Science.gov (United States)

    Alotaibi, Naif M; Samuel, Nardin; Wang, Justin; Ahuja, Christopher S; Guha, Daipayan; Ibrahim, George M; Schweizer, Tom A; Saposnik, Gustavo; Macdonald, R Loch

    2017-02-01

    The diagnosis of a ruptured or unruptured brain aneurysm has a significant impact on patients' quality of life and their psychosocial well-being. As a result, patients and caregivers may resort to social media platforms for support and education. The aim of this report is to evaluate the use of social media and the online communications regarding brain aneurysms. Three social media platforms (Facebook, Twitter, and YouTube) were assessed for public content pertaining to brain aneurysms in March 2016. We conducted a mixed-method analysis that includes a descriptive examination of cross-sectional data and a qualitative evaluation of online communications for thematic analysis. We assessed categorized data using nonparametric tests for statistical significance. Our analyses showed that Facebook was the most highly used social media platform, with 11 relevant pages and 83 groups. Facebook accounts were all nonprofit foundations or patient support groups. Most users in Facebook groups were joining private support groups as opposed to public (P motivation (27.7%), providing and sharing information (26.3%), requesting information (14.4%), seeking emotional support (12.1%), admiration (8.3%), and loss and grief (8.3%). This study is the first to provide insight into characteristics and patterns of social media communications regarding brain aneurysms. These findings should serve to inform the treating physicians of the needs and expectations of individuals affected by brain aneurysms. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Modeling of Multicomponent Diffusions and Natural Convection in Unfractured and Fractured Media by Discontinuous Galerkin and Mixed Methods

    KAUST Repository

    Hoteit, Hussein

    2017-12-29

    Computation of the distribution of species in hydrocarbon reservoirs from diffusions (thermal, molecular, and pressure) and natural convection is an important step in reservoir initialization. Current methods, which are mainly based on the conventional finite difference approach, may not be numerically efficient in fractured and other media with complex heterogeneities. In this work, the discontinuous Galerkin (DG) method combined with the mixed finite element (MFE) method is used for the calculation of compositional variation in fractured hydrocarbon reservoirs. The use of unstructured gridding allows efficient computations for fractured media when the crossflow equilibrium concept is invoked. The DG method has less numerical dispersion than the upwind finite difference (FD) methods. The MFE method ensures continuity of fluxes at the interface of the grid elements. We also use the local discontinuous Galerkin (LDG) method instead of the MFE calculate the diffusion fluxes. Results from several numerical examples are presented to demonstrate the efficiency, robustness, and accuracy of the model. Various features of convection and diffusion in homogeneous, layered, and fractured media are also discussed.

  9. Modeling of Multicomponent Diffusions and Natural Convection in Unfractured and Fractured Media by Discontinuous Galerkin and Mixed Methods

    KAUST Repository

    Hoteit, Hussein; Firoozabadi, Abbas

    2017-01-01

    Computation of the distribution of species in hydrocarbon reservoirs from diffusions (thermal, molecular, and pressure) and natural convection is an important step in reservoir initialization. Current methods, which are mainly based on the conventional finite difference approach, may not be numerically efficient in fractured and other media with complex heterogeneities. In this work, the discontinuous Galerkin (DG) method combined with the mixed finite element (MFE) method is used for the calculation of compositional variation in fractured hydrocarbon reservoirs. The use of unstructured gridding allows efficient computations for fractured media when the crossflow equilibrium concept is invoked. The DG method has less numerical dispersion than the upwind finite difference (FD) methods. The MFE method ensures continuity of fluxes at the interface of the grid elements. We also use the local discontinuous Galerkin (LDG) method instead of the MFE calculate the diffusion fluxes. Results from several numerical examples are presented to demonstrate the efficiency, robustness, and accuracy of the model. Various features of convection and diffusion in homogeneous, layered, and fractured media are also discussed.

  10. Stable and high order accurate difference methods for the elastic wave equation in discontinuous media

    KAUST Repository

    Duru, Kenneth; Virta, Kristoffer

    2014-01-01

    to be discontinuous. The key feature is the highly accurate and provably stable treatment of interfaces where media discontinuities arise. We discretize in space using high order accurate finite difference schemes that satisfy the summation by parts rule. Conditions

  11. An Efficient Hierarchical Multiscale Finite Element Method for Stokes Equations in Slowly Varying Media

    KAUST Repository

    Brown, Donald L.; Efendiev, Yalchin; Hoang, Viet Ha

    2013-01-01

    Direct numerical simulation (DNS) of fluid flow in porous media with many scales is often not feasible, and an effective or homogenized description is more desirable. To construct the homogenized equations, effective properties must be computed

  12. A high-order discontinuous Galerkin method for wave propagation through coupled elastic-acoustic media

    International Nuclear Information System (INIS)

    Wilcox, Lucas C.; Stadler, Georg; Burstedde, Carsten; Ghattas, Omar

    2010-01-01

    We introduce a high-order discontinuous Galerkin (dG) scheme for the numerical solution of three-dimensional (3D) wave propagation problems in coupled elastic-acoustic media. A velocity-strain formulation is used, which allows for the solution of the acoustic and elastic wave equations within the same unified framework. Careful attention is directed at the derivation of a numerical flux that preserves high-order accuracy in the presence of material discontinuities, including elastic-acoustic interfaces. Explicit expressions for the 3D upwind numerical flux, derived as an exact solution for the relevant Riemann problem, are provided. The method supports h-non-conforming meshes, which are particularly effective at allowing local adaptation of the mesh size to resolve strong contrasts in the local wavelength, as well as dynamic adaptivity to track solution features. The use of high-order elements controls numerical dispersion, enabling propagation over many wave periods. We prove consistency and stability of the proposed dG scheme. To study the numerical accuracy and convergence of the proposed method, we compare against analytical solutions for wave propagation problems with interfaces, including Rayleigh, Lamb, Scholte, and Stoneley waves as well as plane waves impinging on an elastic-acoustic interface. Spectral rates of convergence are demonstrated for these problems, which include a non-conforming mesh case. Finally, we present scalability results for a parallel implementation of the proposed high-order dG scheme for large-scale seismic wave propagation in a simplified earth model, demonstrating high parallel efficiency for strong scaling to the full size of the Jaguar Cray XT5 supercomputer.

  13. Methods to assess radioisotope migration in cementitious media using radial diffusion and advection

    International Nuclear Information System (INIS)

    Hinchliff, J.; Felipe-Sotero, M.; Evans, N.D.M.; Read, D.; Drury, D.

    2012-01-01

    One of the primary aims of this project is to understand how a range of isotopes associated with radioactive wastes, move through the cementitious media potentially present in a geological disposal facility (GDF). This paper describes the development of experimental methods that use radial flow from intact cylinders of cementitious material to evaluate the potential for diffusion and advection of relevant isotopes through Nirex reference vault backfill (NRVB). The small scale and cost effectiveness of the approach means that multiple experiments can be undertaken encompassing the full range of physical (and chemical) variations. The radial flow experimental method uses small pre-cast cylinders of the matrix under investigation. For diffusion an appropriate concentration of the isotope of interest ( 90 Sr in the present experiments) is introduced into a cavity in the centre of the cylinder, which is then sealed, and placed in a solution previously equilibrated with the matrix. The increase in concentration of the isotope in the external solution is then determined at defined time intervals. For advection 90 Sr is similarly introduced into the central core of the cylinder and then equilibrated water is forced under nitrogen pressure, from the central core to the outside of the cylinder where it is collected in a tray prior to analysis. Both experimental set ups and results have been modelled using conventional numerical solutions and the simulation package GoldSim. Concerning diffusion experiments the modelled data reproduces the observed data effectively with a right diffusivity value of 9*10 -11 m 2 /s. Concerning advection results are more mitigated and need further investigation

  14. Exchange factor method: an alternative zonal formulation for analysis of radiating enclosures containing participating media

    International Nuclear Information System (INIS)

    Larsen, M.E.

    1983-01-01

    The exchange factor method (EFM) is introduced and compared to the zone method (ZM). In both the EFM and ZM the region of interest is discretized into volume and surface elements, each considered to be isothermal, which are small enough to give the required resolution. A suitable set of state variables for the system is composed of the surface element radiosities and the gas element emissive powers. The EFM defines exchange factors as dimensionless total-exchange areas for radiant interchange between volume and surface elements by all possible absorption/re-emission paths, but excluding wall reflections. In the EFM, the exchange factors replace the direct-exchange areas of the ZM and are used to write energy balances for each area and volume element in the system. As in the ZM, the radiant energy balance equations result in a set of algebraic equations linear in the system state variables. The distinguishing feature of the EFM is that exchange factors may be measurable quantities. Relationships between the EFM exchange factors and the ZM direct-exchange areas are presented. EFM conservation and reciprocity laws, analogous to those of the ZM, are also included. Temperature and heat flux distributions, predicted using the EFM, for two- and three-dimensional enclosures containing absorbing/emitting, isotropically scattering, and conducting media are included. An application of the EFM is proposed which calls for the measurement of exchange factors in a scale model of the enclosure to be analyzed. The measurement of these factors in an enclosure containing an isotropically scattering medium is discussed. The effects of isotropic scattering and absorption/re-emission processes are shown to be indistinguishable in their contribution to exchange factor paths

  15. Novel analytical methods for characterising binding media and protective coatings in artworks

    International Nuclear Information System (INIS)

    Domenech-Carbo, Maria Teresa

    2008-01-01

    Since the first reported analytical studies and technical examinations of art and archaeological objects conducted in the late 18th century, analytical techniques and methods applied to the study of artworks have constantly grown. Among the materials composing the art object, organic compounds used as binding media or protective coatings have attracted the attention of the conservation profession given their noticeable ability for undergoing morphological and chemical changes on ageing. Thus, the aim of this paper is to review the most recent advances in the identification and determination of organic compounds present in art and art conservation materials. Immunofluorescence techniques have been proposed in recent decades as an alternative to the classical and simpler microchemical tests. Besides, a variety of instrumental techniques have also been improved in an attempt to enhance the sensitivity, repeatability and accuracy of the analytical results. Spectroscopic techniques, such as UV-vis, FTIR and Raman spectroscopy, have been coupled with light microscopes for these purposes. Synchrotron radiation FTIR microspectroscopy has also been successfully applied to the analysis of artworks. Mass spectrometry has also been increasingly used as a detector system coupled with a chromatographic device. Chromatographic methods have also improved in recent years. Paper and thin layer chromatographic techniques have been progressively replaced with gas chromatography (GC), pyrolysis-GC, high performance liquid chromatography and capillary electrophoresis. More complex proteomics hyphenated techniques, such as nano-liquid chromatography-nano-electrospray ionisation/collision quadrupole time-of-flight tandem mass spectrometry, have been recently applied to the identification and determination of proteinaceous binders. Microbeam analytical techniques have also been incorporated into the list of advanced instrumental techniques for art conservation purposes. Finally, a number

  16. Novel analytical methods for characterising binding media and protective coatings in artworks

    Energy Technology Data Exchange (ETDEWEB)

    Domenech-Carbo, Maria Teresa [Institut de Restauracio del Patrimoni, Universitat Politecnica de Valencia, Cami de Vera s/n, 46022 Valencia (Spain)], E-mail: tdomenec@crbc.upv.es

    2008-07-28

    Since the first reported analytical studies and technical examinations of art and archaeological objects conducted in the late 18th century, analytical techniques and methods applied to the study of artworks have constantly grown. Among the materials composing the art object, organic compounds used as binding media or protective coatings have attracted the attention of the conservation profession given their noticeable ability for undergoing morphological and chemical changes on ageing. Thus, the aim of this paper is to review the most recent advances in the identification and determination of organic compounds present in art and art conservation materials. Immunofluorescence techniques have been proposed in recent decades as an alternative to the classical and simpler microchemical tests. Besides, a variety of instrumental techniques have also been improved in an attempt to enhance the sensitivity, repeatability and accuracy of the analytical results. Spectroscopic techniques, such as UV-vis, FTIR and Raman spectroscopy, have been coupled with light microscopes for these purposes. Synchrotron radiation FTIR microspectroscopy has also been successfully applied to the analysis of artworks. Mass spectrometry has also been increasingly used as a detector system coupled with a chromatographic device. Chromatographic methods have also improved in recent years. Paper and thin layer chromatographic techniques have been progressively replaced with gas chromatography (GC), pyrolysis-GC, high performance liquid chromatography and capillary electrophoresis. More complex proteomics hyphenated techniques, such as nano-liquid chromatography-nano-electrospray ionisation/collision quadrupole time-of-flight tandem mass spectrometry, have been recently applied to the identification and determination of proteinaceous binders. Microbeam analytical techniques have also been incorporated into the list of advanced instrumental techniques for art conservation purposes. Finally, a number

  17. The application of ethnographic method in the study of digital media

    OpenAIRE

    Amelia Capobianco

    2015-01-01

    Digital media raise methodological issues of some relevance. The following article tries to be a contribution to the qualitative analysis of Social Networks through the use of media ethnography. We deal with issues such as time and space and with how these dimension get transformed in digital environments; the very definition of environment and social network; an effective communication; the constant flow between online and off-line activities; the role of the “digital” researcher, his/her in...

  18. A note on variational multiscale methods for high-contrast heterogeneous porous media flows with rough source terms

    KAUST Repository

    Calo, Victor M.

    2011-09-01

    In this short note, we discuss variational multiscale methods for solving porous media flows in high-contrast heterogeneous media with rough source terms. Our objective is to separate, as much as possible, subgrid effects induced by the media properties from those due to heterogeneous source terms. For this reason, enriched coarse spaces designed for high-contrast multiscale problems are used to represent the effects of heterogeneities of the media. Furthermore, rough source terms are captured via auxiliary correction equations that appear in the formulation of variational multiscale methods [23]. These auxiliary equations are localized and one can use additive or multiplicative constructions for the subgrid corrections as discussed in the current paper. Our preliminary numerical results show that one can capture the effects due to both spatial heterogeneities in the coefficients (such as permeability field) and source terms (e.g., due to singular well terms) in one iteration. We test the cases for both smooth source terms and rough source terms and show that with the multiplicative correction, the numerical approximations are more accurate compared to the additive correction. © 2010 Elsevier Ltd.

  19. MATH INSTRUCTIONAL MEDIA DESIGN USING COMPUTER FOR COMPLETION OF TWO-VARIABLES LINEAR EQUATION SYSTEM BY ELIMINATION METHOD

    Directory of Open Access Journals (Sweden)

    Nurbaiti

    2017-03-01

    Full Text Available Science and technology have been rapidly evolved in some fields of knowledge, including mathematics. Such development can contribute to improvements on the learning process that encourage students and teachers to enhance their abilities and performances. In delivering the material on the linear equation system with two variables (SPLDV, the conventional teaching method where teachers become the center of the learning process is still well-practiced. This method would cause the students get bored and have difficulties to understand the concepts they are learning. Therefore, in order to the learning of SPLDV easy, an interesting, interactive media that the students and teachers can apply is necessary. This media is designed using GUI MATLAB and named as students’ electronic worksheets (e-LKS. This program is intended to help students in finding and understanding the SPLDV concepts more easily. This program is also expected to improve students’ motivation and creativity in learning the material. Based on the test using the System Usability Scale (SUS, the design of interactive mathematics learning media of the linear equation system with Two Variables (SPLDV gets grade B (excellent, meaning that this learning media is proper to be used for Junior High School students of grade VIII.

  20. Modelling of fluid flow in fractured porous media by the singular integral equations method

    International Nuclear Information System (INIS)

    Vu, M.N.

    2012-01-01

    This thesis aims to develop a method for numerical modelling of fluid flow through fractured porous media and for determination of their effective permeability by taking advantage of recent results based on formulation of the problem by Singular Integral Equations. In parallel, it was also an occasion to continue on the theoretical development and to obtain new results in this area. The governing equations for flow in such materials are reviewed first and mass conservation at the fracture intersections is expressed explicitly. Using the theory of potential, the general potential solutions are proposed in the form of a singular integral equation that describes the steady-state flow in and around several fractures embedded in an infinite porous matrix under a far-field pressure condition. These solutions represent the pressure field in the whole body as functions of the infiltration in the fractures, which fully take into account the fracture interaction and intersections. Closed-form solutions for the fundamental problem of fluid flow around a single fracture are derived, which are considered as the benchmark problems to validate the numerical solutions. In particular, the solution obtained for the case of an elliptical disc-shaped crack obeying to the Poiseuille law has been compared to that obtained for ellipsoidal inclusions with Darcy law.The numerical programs have been developed based on the singular integral equations method to resolve the general potential equations. These allow modeling the fluid flow through a porous medium containing a great number of fractures. Besides, this formulation of the problem also allows obtaining a semi-analytical infiltration solution over a single fracture depending on the matrice permeability, the fracture conductivity and the fracture geometry. This result is the important key to up-scaling the effective permeability of a fractured porous medium by using different homogenisation schemes. The results obtained by the self

  1. Finite-fault source inversion using adjoint methods in 3D heterogeneous media

    Science.gov (United States)

    Somala, Surendra Nadh; Ampuero, Jean-Paul; Lapusta, Nadia

    2018-04-01

    , homogeneous velocity model. We find that, for velocity uncertainties that have standard deviation and correlation length typical of available 3D crustal models, the inverted sources can be severely contaminated by spurious features even if the station density is high. When data from thousand or more receivers is used in source inversions in 3D heterogeneous media, the computational cost of the method proposed in this work is at least two orders of magnitude lower than source inversion based on pre-computed Green's functions.

  2. Face recognition system and method using face pattern words and face pattern bytes

    Science.gov (United States)

    Zheng, Yufeng

    2014-12-23

    The present invention provides a novel system and method for identifying individuals and for face recognition utilizing facial features for face identification. The system and method of the invention comprise creating facial features or face patterns called face pattern words and face pattern bytes for face identification. The invention also provides for pattern recognitions for identification other than face recognition. The invention further provides a means for identifying individuals based on visible and/or thermal images of those individuals by utilizing computer software implemented by instructions on a computer or computer system and a computer readable medium containing instructions on a computer system for face recognition and identification.

  3. An efficient wave extrapolation method for tilted orthorhombic media using effective ellipsoidal models

    KAUST Repository

    Waheed, Umair bin; Alkhalifah, Tariq Ali

    2014-01-01

    The wavefield extrapolation operator for ellipsoidally anisotropic (EA) media offers significant cost reduction compared to that for the orthorhombic case, especially when the symmetry planes are tilted and/or rotated. However, ellipsoidal anisotropy does not provide accurate focusing for media of orthorhombic anisotropy. Therefore, we develop effective EA models that correctly capture the kinematic behavior of the wavefield for tilted orthorhombic (TOR) media. Specifically, we compute effective source-dependent velocities for the EA model using kinematic high-frequency representation of the TOR wavefield. The effective model allows us to use the cheaper EA wavefield extrapolation operator to obtain approximate wavefield solutions for a TOR model. Despite the fact that the effective EA models are obtained by kinematic matching using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including the frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy tradeoff for wavefield computations in TOR media, particularly for media of low to moderate complexity. We demonstrate applicability of the proposed approach on a layered TOR model.

  4. An efficient wave extrapolation method for tilted orthorhombic media using effective ellipsoidal models

    KAUST Repository

    Waheed, Umair bin

    2014-08-01

    The wavefield extrapolation operator for ellipsoidally anisotropic (EA) media offers significant cost reduction compared to that for the orthorhombic case, especially when the symmetry planes are tilted and/or rotated. However, ellipsoidal anisotropy does not provide accurate focusing for media of orthorhombic anisotropy. Therefore, we develop effective EA models that correctly capture the kinematic behavior of the wavefield for tilted orthorhombic (TOR) media. Specifically, we compute effective source-dependent velocities for the EA model using kinematic high-frequency representation of the TOR wavefield. The effective model allows us to use the cheaper EA wavefield extrapolation operator to obtain approximate wavefield solutions for a TOR model. Despite the fact that the effective EA models are obtained by kinematic matching using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including the frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy tradeoff for wavefield computations in TOR media, particularly for media of low to moderate complexity. We demonstrate applicability of the proposed approach on a layered TOR model.

  5. Production data in media systems and press front ends: capture, formats and database methods

    Science.gov (United States)

    Karttunen, Simo

    1997-02-01

    The nature, purpose and data presentation features of media jobs are analyzed in relation to the content, document, process and resource management in media production. Formats are the natural way of presenting, collecting and storing information, contents, document components and final documents. The state of the art and the trends in the media formats and production data are reviewed. The types and the amount of production data are listed, e.g. events, schedules, product descriptions, reports, visual support, quality, process states and color data. The data exchange must be vendor-neutral. Adequate infrastructure and system architecture are defined for production and media data. The roles of open servers and intranets are evaluated and their potential roles as future solutions are anticipated. The press frontend is the part of print media production where large files dominate. The new output alternatives, i.e. film recorders, direct plate output (CTP and CTP-on-press) and digital, plateless printing lines need new workflow tools and very efficient file and format management. The paper analyzes the capture, formatting and storing of job files and respective production data, such as the event logs of the processes. Intranet, browsers, Java applets and open web severs will be used to capture production data, especially where intranets are used anyhow, or where several companies are networked to plan, design and use documents and printed products. The user aspects of installing intranets is stressed since there are numerous more traditional and more dedicated networking solutions on the market.

  6. Boundary element method in dynamic interaction of structures with multilayers media

    International Nuclear Information System (INIS)

    Mihalache, N.; Poterasu, V.F.

    1993-01-01

    The paper presents the problems of dynamic interaction between the multilayers media and structure by means of B.E.M., using Green's functions. The structure considered by the authors as a particular problem concerns a reinforced concrete shear wall and soil foundation of three layers having different thickness and mechanical characteristics. The authors will present comparatively the stresses and the displacements in static and dynamic regime interaction response of the structure. Theoretical part of the paper presents: Green's functions for the multilayers media in dynamic regime, stiffness matrices, stresses and displacements in the multilayers media exprimed by means of the Green's functions induced by the shear and horizontal forces, computer program, consideration for dynamic, structure-foundation-multilayers soil foundation interaction. (author)

  7. Method of model reduction and multifidelity models for solute transport in random layered porous media

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhijie; Tartakovsky, Alexandre M.

    2017-09-01

    This work presents a hierarchical model for solute transport in bounded layered porous media with random permeability. The model generalizes the Taylor-Aris dispersion theory to stochastic transport in random layered porous media with a known velocity covariance function. In the hierarchical model, we represent (random) concentration in terms of its cross-sectional average and a variation function. We derive a one-dimensional stochastic advection-dispersion-type equation for the average concentration and a stochastic Poisson equation for the variation function, as well as expressions for the effective velocity and dispersion coefficient. We observe that velocity fluctuations enhance dispersion in a non-monotonic fashion: the dispersion initially increases with correlation length λ, reaches a maximum, and decreases to zero at infinity. Maximum enhancement can be obtained at the correlation length about 0.25 the size of the porous media perpendicular to flow.

  8. High-order FDTD methods for transverse electromagnetic systems in dispersive inhomogeneous media.

    Science.gov (United States)

    Zhao, Shan

    2011-08-15

    This Letter introduces a novel finite-difference time-domain (FDTD) formulation for solving transverse electromagnetic systems in dispersive media. Based on the auxiliary differential equation approach, the Debye dispersion model is coupled with Maxwell's equations to derive a supplementary ordinary differential equation for describing the regularity changes in electromagnetic fields at the dispersive interface. The resulting time-dependent jump conditions are rigorously enforced in the FDTD discretization by means of the matched interface and boundary scheme. High-order convergences are numerically achieved for the first time in the literature in the FDTD simulations of dispersive inhomogeneous media. © 2011 Optical Society of America

  9. Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    International Nuclear Information System (INIS)

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin

    2015-01-01

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system

  10. Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Kai, E-mail: kaigao87@gmail.com [Department of Geology and Geophysics, Texas A& M University, College Station, TX 77843 (United States); Fu, Shubin, E-mail: shubinfu89@gmail.com [Department of Mathematics, Texas A& M University, College Station, TX 77843 (United States); Gibson, Richard L., E-mail: gibson@tamu.edu [Department of Geology and Geophysics, Texas A& M University, College Station, TX 77843 (United States); Chung, Eric T., E-mail: tschung@math.cuhk.edu.hk [Department of Mathematics, The Chinese University of Hong Kong, Shatin, NT (Hong Kong); Efendiev, Yalchin, E-mail: efendiev@math.tamu.edu [Department of Mathematics, Texas A& M University, College Station, TX 77843 (United States); Numerical Porous Media SRI Center (NumPor), King Abdullah University of Science and Technology, Thuwal (Saudi Arabia)

    2015-08-15

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.

  11. Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    KAUST Repository

    Gao, Kai

    2015-04-14

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both boundaries and the interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.

  12. The Expanding Digital Media Landscape of Qualitative and Decolonizing Research: Examining Collaborative Podcasting as a Research Method

    Directory of Open Access Journals (Sweden)

    Lindsay Day

    2017-12-01

    Full Text Available Technology of the twenty-first century has transformed our ability to create, modify, store, and share digital media and, in so doing, has presented new possibilities for how social science research can be conducted and mobilized. This paper introduces the use of collaborative podcasting as a research method of critical inquiry and knowledge mobilization. Using a case study, we describe the methodological process that our transdisciplinary team engaged in to create the Water Dialogues podcast, a collaborative initiative stemming from a larger research project examining approaches to implementing Indigenous and Western knowledge in water research and management. We situate collaborative podcasting within an expanding field of collaborative and participatory media practice in social research, and consider how the method may align with and support research within a decolonizing agenda.

  13. Variable discrete ordinates method for radiation transfer in plane-parallel semi-transparent media with variable refractive index

    Science.gov (United States)

    Sarvari, S. M. Hosseini

    2017-09-01

    The traditional form of discrete ordinates method is applied to solve the radiative transfer equation in plane-parallel semi-transparent media with variable refractive index through using the variable discrete ordinate directions and the concept of refracted radiative intensity. The refractive index are taken as constant in each control volume, such that the direction cosines of radiative rays remain non-variant through each control volume, and then, the directions of discrete ordinates are changed locally by passing each control volume, according to the Snell's law of refraction. The results are compared by the previous studies in this field. Despite simplicity, the results show that the variable discrete ordinate method has a good accuracy in solving the radiative transfer equation in the semi-transparent media with arbitrary distribution of refractive index.

  14. Methods, media and systems for managing a distributed application running in a plurality of digital processing devices

    Science.gov (United States)

    Laadan, Oren; Nieh, Jason; Phung, Dan

    2012-10-02

    Methods, media and systems for managing a distributed application running in a plurality of digital processing devices are provided. In some embodiments, a method includes running one or more processes associated with the distributed application in virtualized operating system environments on a plurality of digital processing devices, suspending the one or more processes, and saving network state information relating to network connections among the one or more processes. The method further include storing process information relating to the one or more processes, recreating the network connections using the saved network state information, and restarting the one or more processes using the stored process information.

  15. Stability Analysis of Algebraic Reconstruction for Immersed Boundary Methods with Application in Flow and Transport in Porous Media

    Science.gov (United States)

    Yousefzadeh, M.; Battiato, I.

    2017-12-01

    Flow and reactive transport problems in porous media often involve complex geometries with stationary or evolving boundaries due to absorption and dissolution processes. Grid based methods (e.g. finite volume, finite element, etc.) are a vital tool for studying these problems. Yet, implementing these methods requires one to answer a very first question of what type of grid is to be used. Among different possible answers, Cartesian grids are one of the most attractive options as they possess simple discretization stencil and are usually straightforward to generate at roughly no computational cost. The Immersed Boundary Method, a Cartesian based methodology, maintains most of the useful features of the structured grids while exhibiting a high-level resilience in dealing with complex geometries. These features make it increasingly more attractive to model transport in evolving porous media as the cost of grid generation reduces greatly. Yet, stability issues and severe time-step restriction due to explicit-time implementation combined with limited studies on the implementation of Neumann (constant flux) and linear and non-linear Robin (e.g. reaction) boundary conditions (BCs) have significantly limited the applicability of IBMs to transport in porous media. We have developed an implicit IBM capable of handling all types of BCs and addressed some numerical issues, including unconditional stability criteria, compactness and reduction of spurious oscillations near the immersed boundary. We tested the method for several transport and flow scenarios, including dissolution processes in porous media, and demonstrate its capabilities. Successful validation against both experimental and numerical data has been carried out.

  16. Learning Science in Virtual Reality Multimedia Environments: Role of Methods and Media.

    Science.gov (United States)

    Moreno, Roxana; Mayer, Richard E.

    2002-01-01

    College students learned about botany through an agent-based multimedia game. Students received either spoken or identical on-screen text explanations. Results reveal that students scored higher on retention, transfer, and program ratings in narration conditions than in text conditions. The media--desktop displays or headmounted displays--did not…

  17. Method for the preparation of new X-ray contrast media

    International Nuclear Information System (INIS)

    1977-01-01

    The chemical preparation is described of contrast media possessing an optimal combination of the following parameters: non-toxicity, non-ionogenicity, osmolality, viscosity, stability, ease and cheapness of preparation. Triiodinated and substituted isophtalamides are used with hydroxyethyl or hydroxypropyl groups as substituents. The result is an aqueous solution of isomers, from which the meso-isomer was removed by crystallization

  18. The acceptability among health researchers and clinicians of social media to translate research evidence to clinical practice: mixed-methods survey and interview study.

    Science.gov (United States)

    Tunnecliff, Jacqueline; Ilic, Dragan; Morgan, Prue; Keating, Jennifer; Gaida, James E; Clearihan, Lynette; Sadasivan, Sivalal; Davies, David; Ganesh, Shankar; Mohanty, Patitapaban; Weiner, John; Reynolds, John; Maloney, Stephen

    2015-05-20

    Establishing and promoting connections between health researchers and health professional clinicians may help translate research evidence to clinical practice. Social media may have the capacity to enhance these connections. The aim of this study was to explore health researchers' and clinicians' current use of social media and their beliefs and attitudes towards the use of social media for communicating research evidence. This study used a mixed-methods approach to obtain qualitative and quantitative data. Participation was open to health researchers and clinicians. Data regarding demographic details, current use of social media, and beliefs and attitudes towards the use of social media for professional purposes were obtained through an anonymous Web-based survey. The survey was distributed via email to research centers, educational and clinical institutions, and health professional associations in Australia, India, and Malaysia. Consenting participants were stratified by country and role and selected at random for semistructured telephone interviews to explore themes arising from the survey. A total of 856 participants completed the questionnaire with 125 participants declining to participate, resulting in a response rate of 87.3%. 69 interviews were conducted with participants from Australia, India, and Malaysia. Social media was used for recreation by 89.2% (749/840) of participants and for professional purposes by 80.0% (682/852) of participants. Significant associations were found between frequency of professional social media use and age, gender, country of residence, and graduate status. Over a quarter (26.9%, 229/852) of participants used social media for obtaining research evidence, and 15.0% (128/852) of participants used social media for disseminating research evidence. Most participants (95.9%, 810/845) felt there was a role for social media in disseminating or obtaining research evidence. Over half of the participants (449/842, 53.3%) felt they had a

  19. How do professional Australian Football League (AFL) players utilise social media during periods of injury? A mixed methods analysis.

    Science.gov (United States)

    Nankervis, Brodie; Ferguson, Laura; Gosling, Cameron; Storr, Michael; Ilic, Dragan; Young, Mark; Maloney, Stephen

    2018-07-01

    The objective of this study was to explore how social media is used by a population of injured professional athletes, by comparing the content and frequency of posts on social media, pre and post-injury. A retrospective mixed methods design was utilised. Professional Australian Football League (AFL) players, injured during the 2015 season, were included in the study. Publicly accessible social media profiles for these players were identified on Twitter and Instagram. All posts published on verified profiles, from four weeks prior to injury until return to play, were extracted. Thematic analysis was used to investigate the content of these posts, while univariate and multivariate linear regression was used to investigate the frequency of posts during this time period. Two reoccurring themes were identified exclusively post-injury; 'supporting team from the sideline' and 'sharing information about injury and rehabilitation'. The frequency of total posts did not differ significantly pre and post-injury, but the frequency of injury related posts increased in the immediate post-injury phase, then decreased between 4-8 weeks and 8-12 weeks post-injury. The frequency of injury related posts was higher with more severe injuries. The findings of this study suggest that injured players use social media to seek social support from their followers, especially in the immediate post-injury period and after sustaining a severe injury. The role of social media in injury rehabilitation may warrant further investigation, to determine if it could be used to facilitate return to play. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  20. Numerical modeling of contaminant transport in fractured porous media using mixed finite-element and finitevolume methods

    KAUST Repository

    Dong, Chen

    2011-01-01

    A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods; i.e., the mixed finite-element (MFE) method and the finite-volume method. Adaptive triangle mesh is used for effective treatment of the fractures. A hybrid MFE method is employed to provide an accurate approximation of velocity fields for both the fractures and matrix, which are crucial to the convection part of the transport equation. The finite-volume method and the standard MFE method are used to approximate the convection and dispersion terms, respectively. The temporary evolution for the pressure distributions, streamline fields, and concentration profiles are obtained for six different arrangements of fractures. The results clearly show the distorted concentration effects caused by the ordered and disordered (random) patterns of the fractures and illustrate the robustness and efficiency of the proposed numerical model. © 2011 by Begell House Inc.

  1. Do We Really Need to Catch Them All? A New User-Guided Social Media Crawling Method

    Science.gov (United States)

    Erlandsson, Fredrik; Bródka, Piotr; Boldt, Martin; Johnson, Henric

    2017-12-01

    With the growing use of popular social media services like Facebook and Twitter it is challenging to collect all content from the networks without access to the core infrastructure or paying for it. Thus, if all content cannot be collected one must consider which data are of most importance. In this work we present a novel User-guided Social Media Crawling method (USMC) that is able to collect data from social media, utilizing the wisdom of the crowd to decide the order in which user generated content should be collected to cover as many user interactions as possible. USMC is validated by crawling 160 public Facebook pages, containing content from 368 million users including 1.3 billion interactions, and it is compared with two other crawling methods. The results show that it is possible to cover approximately 75% of the interactions on a Facebook page by sampling just 20% of its posts, and at the same time reduce the crawling time by 53%. In addition, the social network constructed from the 20% sample contains more than 75% of the users and edges compared to the social network created from all posts, and it has similar degree distribution.

  2. Do We Really Need to Catch Them All? A New User-Guided Social Media Crawling Method

    Directory of Open Access Journals (Sweden)

    Fredrik Erlandsson

    2017-12-01

    Full Text Available [-15]With the growing use of popular social media services like Facebook and Twitter it is challenging to collect all content from the networks without access to the core infrastructure or paying for it. Thus, if all content cannot be collected one must consider which data are of most importance. In this work we present a novel User-guided Social Media Crawling method (USMC that is able to collect data from social media, utilizing the wisdom of the crowd to decide the order in which user generated content should be collected to cover as many user interactions as possible. USMC is validated by crawling 160 public Facebook pages, containing content from 368 million users including 1.3 billion interactions, and it is compared with two other crawling methods. The results show that it is possible to cover approximately 75% of the interactions on a Facebook page by sampling just 20% of its posts, and at the same time reduce the crawling time by 53%. In addition, the social network constructed from the 20% sample contains more than 75% of the users and edges compared to the social network created from all posts, and it has similar degree distribution.

  3. Roles, trust, and reputation in social media knowledge markets theory and methods

    CERN Document Server

    Matei, Sorin

    2015-01-01

    This title discusses the emerging trends in defining, measuring, and operationalizing reputation as a new and essential component of the knowledge that is generated and consumed online. The book also proposes a future research agenda related to these issues—with the ultimate goal of shaping the next generation of theoretical and analytic strategies needed for understanding how knowledge markets are influenced by social interactions and reputations built around functional roles. Roles, Trust, and Reputation in Social Media Knowledge Markets exposes issues that have not been satisfactorily dealt with in the current literature. In a broader sense, the volume aims to change the way in which knowledge generation in social media spaces is understood and utilized. The tools, theories, and methodologies proposed here offer concrete avenues for developing the next generation of research strategies and applications that will help: tomorrow’s information consumers make smarter choices, developers to create new tools...

  4. The Gas-Absorption/Chemical-Reaction Method for Measuring Air-Water Interfacial Area in Natural Porous Media

    Science.gov (United States)

    Lyu, Ying; Brusseau, Mark L.; El Ouni, Asma; Araujo, Juliana B.; Su, Xiaosi

    2017-11-01

    The gas-absorption/chemical-reaction (GACR) method used in chemical engineering to quantify gas-liquid interfacial area in reactor systems is adapted for the first time to measure the effective air-water interfacial area of natural porous media. Experiments were conducted with the GACR method, and two standard methods (X-ray microtomographic imaging and interfacial partitioning tracer tests) for comparison, using model glass beads and a natural sand. The results of a series of experiments conducted under identical conditions demonstrated that the GACR method exhibited excellent repeatability for measurement of interfacial area (Aia). Coefficients of variation for Aia were 3.5% for the glass beads and 11% for the sand. Extrapolated maximum interfacial areas (Am) obtained with the GACR method were statistically identical to independent measures of the specific solid surface areas of the media. For example, the Am for the glass beads is 29 (±1) cm-1, compared to 32 (±3), 30 (±2), and 31 (±2) cm-1 determined from geometric calculation, N2/BET measurement, and microtomographic measurement, respectively. This indicates that the method produced accurate measures of interfacial area. Interfacial areas determined with the GACR method were similar to those obtained with the standard methods. For example, Aias of 47 and 44 cm-1 were measured with the GACR and XMT methods, respectively, for the sand at a water saturation of 0.57. The results of the study indicate that the GACR method is a viable alternative for measuring air-water interfacial areas. The method is relatively quick, inexpensive, and requires no specialized instrumentation compared to the standard methods.

  5. Acceleration of Gas Flow Simulations in Dual-Continuum Porous Media Based on the Mass-Conservation POD Method

    KAUST Repository

    Wang, Yi

    2017-09-12

    Reduced-order modeling approaches for gas flow in dual-porosity dual-permeability porous media are studied based on the proper orthogonal decomposition (POD) method combined with Galerkin projection. The typical modeling approach for non-porous-medium liquid flow problems is not appropriate for this compressible gas flow in a dual-continuum porous media. The reason is that non-zero mass transfer for the dual-continuum system can be generated artificially via the typical POD projection, violating the mass-conservation nature and causing the failure of the POD modeling. A new POD modeling approach is proposed considering the mass conservation of the whole matrix fracture system. Computation can be accelerated as much as 720 times with high precision (reconstruction errors as slow as 7.69 × 10−4%~3.87% for the matrix and 8.27 × 10−4%~2.84% for the fracture).

  6. Numerical Simulation of Density-Driven Flow and Heat Transport Processes in Porous Media Using the Network Method

    Directory of Open Access Journals (Sweden)

    Manuel Cánovas

    2017-09-01

    Full Text Available Density-driven flow and heat transport processes in 2-D porous media scenarios are governed by coupled, non-linear, partial differential equations that normally have to be solved numerically. In the present work, a model based on the network method simulation is designed and applied to simulate these processes, providing steady state patterns that demonstrate its computational power and reliability. The design is relatively simple and needs very few rules. Two applications in which heat is transported by natural convection in confined and saturated media are studied: slender boxes heated from below (a kind of Bénard problem and partially heated horizontal plates in rectangular domains (the Elder problem. The streamfunction and temperature patterns show that the results are coherent with those of other authors: steady state patterns and heat transfer depend both on the Rayleigh number and on the characteristic Darcy velocity derived from the values of the hydrological, thermal and geometrical parameters of the problems.

  7. Acceleration of Gas Flow Simulations in Dual-Continuum Porous Media Based on the Mass-Conservation POD Method

    KAUST Repository

    Wang, Yi; Sun, Shuyu; Yu, Bo

    2017-01-01

    Reduced-order modeling approaches for gas flow in dual-porosity dual-permeability porous media are studied based on the proper orthogonal decomposition (POD) method combined with Galerkin projection. The typical modeling approach for non-porous-medium liquid flow problems is not appropriate for this compressible gas flow in a dual-continuum porous media. The reason is that non-zero mass transfer for the dual-continuum system can be generated artificially via the typical POD projection, violating the mass-conservation nature and causing the failure of the POD modeling. A new POD modeling approach is proposed considering the mass conservation of the whole matrix fracture system. Computation can be accelerated as much as 720 times with high precision (reconstruction errors as slow as 7.69 × 10−4%~3.87% for the matrix and 8.27 × 10−4%~2.84% for the fracture).

  8. Pure Quasi-P-wave calculation in transversely isotropic media using a hybrid method

    KAUST Repository

    Wu, Zedong

    2018-04-12

    The acoustic approximation for anisotropic media is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on fewer medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from shear wave artifacts. Thus, we derive a new acoustic wave equation for wave propagation in transversely isotropic (TI) media, which is based on a partially separable approximation of the dispersion relation for TI media and free of shear wave artifacts. Even though our resulting equation is not a partial differential equation, it is still a linear equation. Thus, we propose to implement this equation efficiently by combining the finite difference approximation with spectral evaluation of the space-independent parts. The resulting algorithm provides solutions without the constrain of ε ≥ δ. Numerical tests demonstrate the effectiveness of the approach.

  9. Pure Quasi-P-wave calculation in transversely isotropic media using a hybrid method

    KAUST Repository

    Wu, Zedong; Liu, Hongwei; Alkhalifah, Tariq Ali

    2018-01-01

    The acoustic approximation for anisotropic media is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on fewer medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from shear wave artifacts. Thus, we derive a new acoustic wave equation for wave propagation in transversely isotropic (TI) media, which is based on a partially separable approximation of the dispersion relation for TI media and free of shear wave artifacts. Even though our resulting equation is not a partial differential equation, it is still a linear equation. Thus, we propose to implement this equation efficiently by combining the finite difference approximation with spectral evaluation of the space-independent parts. The resulting algorithm provides solutions without the constrain of ε ≥ δ. Numerical tests demonstrate the effectiveness of the approach.

  10. An accurate discontinuous Galerkin method for solving point-source Eikonal equation in 2-D heterogeneous anisotropic media

    Science.gov (United States)

    Le Bouteiller, P.; Benjemaa, M.; Métivier, L.; Virieux, J.

    2018-03-01

    Accurate numerical computation of wave traveltimes in heterogeneous media is of major interest for a large range of applications in seismics, such as phase identification, data windowing, traveltime tomography and seismic imaging. A high level of precision is needed for traveltimes and their derivatives in applications which require quantities such as amplitude or take-off angle. Even more challenging is the anisotropic case, where the general Eikonal equation is a quartic in the derivatives of traveltimes. Despite their efficiency on Cartesian meshes, finite-difference solvers are inappropriate when dealing with unstructured meshes and irregular topographies. Moreover, reaching high orders of accuracy generally requires wide stencils and high additional computational load. To go beyond these limitations, we propose a discontinuous-finite-element-based strategy which has the following advantages: (1) the Hamiltonian formalism is general enough for handling the full anisotropic Eikonal equations; (2) the scheme is suitable for any desired high-order formulation or mixing of orders (p-adaptivity); (3) the solver is explicit whatever Hamiltonian is used (no need to find the roots of the quartic); (4) the use of unstructured meshes provides the flexibility for handling complex boundary geometries such as topographies (h-adaptivity) and radiation boundary conditions for mimicking an infinite medium. The point-source factorization principles are extended to this discontinuous Galerkin formulation. Extensive tests in smooth analytical media demonstrate the high accuracy of the method. Simulations in strongly heterogeneous media illustrate the solver robustness to realistic Earth-sciences-oriented applications.

  11. Comparison of a radiometric method (BACTEC) and conventional culture media for recovery of mycobacteria from smear-negative specimens

    International Nuclear Information System (INIS)

    Morgan, M.A.; Horstmeier, C.D.; DeYoung, D.R.; Roberts, G.D.

    1983-01-01

    The BACTEC system and three conventional media (Middlebrook 7H10, selective Middlebrook 7H11 [S7H11], and Lowenstein-Jensen [LJ] were compared for their mean recovery times and recovery rates of mycobacteria from acid-fast, smear-negative clinical specimens. Of the 71 smear-negative, culture-positive specimens recovered from 2,165 submitted smear-negative cultures, the BACTEC system detected 71.8%, compared with 88.7% for the conventional three-medium system. When media were individually compared, BACTEC medium (Middlebrook 7H12) was more successful in recovering mycobacteria (71.8%) than was LJ (62%), Middlebrook medium 7H10 (55.9%), or Middlebrook S7H11 medium (52.1%). Middlebrook 7H11 medium containing sodium selenate was also evaluated and did not increase the recovery rate or decrease the recovery time of mycobacterial species when compared with LJ, Middlebrook 7H10, S7H11, and 7H12 media. The mean detection time for the BACTEC system was less than that by conventional methods for the seven species of mycobacteria recovered. Detection times for Mycobacterium tuberculosis on the BACTEC system and conventional cultural systems were 13.7 and 26.3 days, respectively

  12. Some current methods to represent the heterogeneity of natural media in hydrogeology

    Science.gov (United States)

    de Marsily, G.; Delay, F.; Teles, V.; Schafmeister, M. T.

    We have known for a long time that the material properties of the subsurface are highly variable in space. We have learned that this variability is due to the extreme complexity and variation with time of processes responsible for the formation of the earth's crust, from plate tectonics to erosion, sediment transport, and deposition, as well as to mechanical, climatic, and diagenetic effects. As geologists, we learned how to "read" this complex history in the rocks and how to try to extrapolate in space what we have understood. As physicists, we then learned that to study flow processes in such media we must apply the laws of continuum mechanics. As mathematicians using analytical methods, we learned that we must simplify by dividing this complex continuum into a small number of units, such as aquifers and aquitards, and describe their properties by (constant) equivalent values. In recent years, as numerical modelers, we learned that we now have the freedom to "discretize" this complex reality and describe it as an ensemble of small homogeneous boxes of continuous media, each of which can have different properties. How do we use this freedom? Is there a need for it? If the answer is "yes," how can we assign different rock-property values to thousands or even millions of such little boxes in our models, to best represent reality, and include confidence levels for each selected rock property? As a tribute to Professor Eugene S. Simpson, with whom the first author of this paper often discussed these questions, we present an overview of three techniques that focus on one property, the rock permeability. We explain the motivation for describing spatial variability and illustrate how to do so by the geostatistical method, the Boolean method, and the genetic method. We discuss their advantages and disadvantages and indicate their present state of development. This is an active field of research and space is limited, so the review is certain to be incomplete, but we hope

  13. Simulation of radionuclides migration in porous media through integral transform method

    International Nuclear Information System (INIS)

    Ostwald, P.N.; Cotta, R.M.

    1992-01-01

    An analytical solution is obtained for the transient one-dimensional convection-diffusion equation that governs the dispersion of radionuclides through planar porous media, by applying the generalized integral transform technique. The present simulation has direct application in the analysis of radioactive waste migration through the soil and engineering barriers, originated from leakages in waste repositories. Results for concentration distributions in a typical application (Cs 137 ) are critically compared to those from a purely numerical approach, available in a scientific subroutines library. Different runs for combinations of the governing parameters are then interpreted. (author)

  14. A Comparison of Streaming and Microelectrophoresis Methods for Obtaining the zeta Potential of Granular Porous Media Surfaces.

    Science.gov (United States)

    Johnson

    1999-01-01

    The electrokinetic behavior of granular quartz sand in aqueous solution is investigated by both microelectrophoresis and streaming potential methods. zeta potentials of surfaces composed of granular quartz obtained via streaming potential methods are compared to electrophoretic mobility zeta potential values of colloid-sized quartz fragments. The zeta values generated by these alternate methods are in close agreement over a wide pH range and electrolyte concentrations spanning several orders of magnitude. Streaming measurements performed on chemically heterogeneous mixtures of physically homogeneous sand are shown to obey a simple mixing model based on the surface area-weighted average of the streaming potentials associated with the individual end members. These experimental results support the applicability of the streaming potential method as a means of determining the zeta potential of granular porous media surfaces. Copyright 1999 Academic Press.

  15. A method of producing small grain Ru intermediate layers for perpendicular magnetic media

    International Nuclear Information System (INIS)

    Yuan Hua; Qin Yueling; Laughlin, David E.

    2008-01-01

    NiAl + SiO 2 thin films were used as a grain size reducing seedlayer for cobalt alloy granular perpendicular magnetic recording media. The effect of this NiAl + SiO 2 seedlayer on the microstructure and crystalline orientation of Ru intermediate layer has been investigated. By co-sputtering the composite NiAl + SiO 2 seedlayer, the smallest average grain diameter of NiAl was significantly reduced to about 2.5 nm. The grain size of the subsequent Ru intermediate layer was reduced to about 4 nm. X-ray diffraction results indicate an epitaxial orientation relationship of NiAl (110) // Ru (0002) between the two layers. Moreover, significant improvement of this epitaxial relationship was developed, which produced narrow c-axis distribution of the Ru intermediate layer with small grain size. The addition of the NiAl + SiO 2 seedlayer is a very promising approach to reduce the Ru intermediate layer grain size and eventually the magnetic layer grain size for perpendicular magnetic recording media without deterioration of other properties of thin films

  16. Comparison of the quantitative dry culture methods with both conventional media and most probable number method for the enumeration of coliforms and Escherichia coli/coliforms in food.

    Science.gov (United States)

    Teramura, H; Sota, K; Iwasaki, M; Ogihara, H

    2017-07-01

    Sanita-kun™ CC (coliform count) and EC (Escherichia coli/coliform count), sheet quantitative culture systems which can avoid chromogenic interference by lactase in food, were evaluated in comparison with conventional methods for these bacteria. Based on the results of inclusivity and exclusivity studies using 77 micro-organisms, sensitivity and specificity of both Sanita-kun™ met the criteria for ISO 16140. Both media were compared with deoxycholate agar, violet red bile agar, Merck Chromocult™ coliform agar (CCA), 3M Petrifilm™ CC and EC (PEC) and 3-tube MPN, as reference methods, in 100 naturally contaminated food samples. The correlation coefficients of both Sanita-kun™ for coliform detection were more than 0·95 for all comparisons. For E. coli detection, Sanita-kun™ EC was compared with CCA, PEC and MPN in 100 artificially contaminated food samples. The correlation coefficients for E. coli detection of Sanita-kun™ EC were more than 0·95 for all comparisons. There were no significant differences in all comparisons when conducting a one-way analysis of variance (anova). Both Sanita-kun™ significantly inhibited colour interference by lactase when inhibition of enzymatic staining was assessed using 40 natural cheese samples spiked with coliform. Our results demonstrated Sanita-kun™ CC and EC are suitable alternatives for the enumeration of coliforms and E. coli/coliforms, respectively, in a variety of foods, and specifically in fermented foods. Current chromogenic media for coliforms and Escherichia coli/coliforms have enzymatic coloration due to breaking down of chromogenic substrates by food lactase. The novel sheet culture media which have film layer to avoid coloration by food lactase have been developed for enumeration of coliforms and E. coli/coliforms respectively. In this study, we demonstrated these media had comparable performance with reference methods and less interference by food lactase. These media have a possibility not only

  17. An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, A. [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Lead, J.R., E-mail: jlead@mailbox.sc.edu [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States); Baalousha, M., E-mail: mbaalous@mailbox.sc.edu [Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States)

    2015-12-15

    Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L{sup −1}). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

  18. An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

    International Nuclear Information System (INIS)

    Prasad, A.; Lead, J.R.; Baalousha, M.

    2015-01-01

    Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L"−"1). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

  19. Subsurface Flow Modeling in Single and Dual Continuum Anisotropic Porous Media using the Multipoint Flux Approximation Method

    KAUST Repository

    Negara, Ardiansyah

    2015-05-01

    Anisotropy of hydraulic properties of the subsurface geologic formations is an essential feature that has been established as a consequence of the different geologic processes that undergo during the longer geologic time scale. With respect to subsurface reservoirs, in many cases, anisotropy plays significant role in dictating the direction of flow that becomes no longer dependent only on driving forces like the pressure gradient and gravity but also on the principal directions of anisotropy. Therefore, there has been a great deal of motivation to consider anisotropy into the subsurface flow and transport models. In this dissertation, we present subsurface flow modeling in single and dual continuum anisotropic porous media, which include the single-phase groundwater flow coupled with the solute transport in anisotropic porous media, the two-phase flow with gravity effect in anisotropic porous media, and the natural gas flow in anisotropic shale reservoirs. We have employed the multipoint flux approximation (MPFA) method to handle anisotropy in the flow model. The MPFA method is designed to provide correct discretization of the flow equations for general orientation of the principal directions of the permeability tensor. The implementation of MPFA method is combined with the experimenting pressure field approach, a newly developed technique that enables the solution of the global problem breaks down into the solution of multitude of local problems. The numerical results of the study demonstrate the significant effects of anisotropy of the subsurface formations. For the single-phase groundwater flow coupled with the solute transport modeling in anisotropic porous media, the results shows the strong impact of anisotropy on the pressure field and the migration of the solute concentration. For the two-phase flow modeling with gravity effect in anisotropic porous media, it is observed that the buoyancy-driven flow, which emerges due to the density differences between the

  20. Multilevel and quasi-Monte Carlo methods for uncertainty quantification in particle travel times through random heterogeneous porous media

    Science.gov (United States)

    Crevillén-García, D.; Power, H.

    2017-08-01

    In this study, we apply four Monte Carlo simulation methods, namely, Monte Carlo, quasi-Monte Carlo, multilevel Monte Carlo and multilevel quasi-Monte Carlo to the problem of uncertainty quantification in the estimation of the average travel time during the transport of particles through random heterogeneous porous media. We apply the four methodologies to a model problem where the only input parameter, the hydraulic conductivity, is modelled as a log-Gaussian random field by using direct Karhunen-Loéve decompositions. The random terms in such expansions represent the coefficients in the equations. Numerical calculations demonstrating the effectiveness of each of the methods are presented. A comparison of the computational cost incurred by each of the methods for three different tolerances is provided. The accuracy of the approaches is quantified via the mean square error.

  1. Multilevel and quasi-Monte Carlo methods for uncertainty quantification in particle travel times through random heterogeneous porous media.

    Science.gov (United States)

    Crevillén-García, D; Power, H

    2017-08-01

    In this study, we apply four Monte Carlo simulation methods, namely, Monte Carlo, quasi-Monte Carlo, multilevel Monte Carlo and multilevel quasi-Monte Carlo to the problem of uncertainty quantification in the estimation of the average travel time during the transport of particles through random heterogeneous porous media. We apply the four methodologies to a model problem where the only input parameter, the hydraulic conductivity, is modelled as a log-Gaussian random field by using direct Karhunen-Loéve decompositions. The random terms in such expansions represent the coefficients in the equations. Numerical calculations demonstrating the effectiveness of each of the methods are presented. A comparison of the computational cost incurred by each of the methods for three different tolerances is provided. The accuracy of the approaches is quantified via the mean square error.

  2. Effect of Chemistry Triangle Oriented Learning Media on Cooperative, Individual and Conventional Method on Chemistry Learning Result

    Science.gov (United States)

    Latisma D, L.; Kurniawan, W.; Seprima, S.; Nirbayani, E. S.; Ellizar, E.; Hardeli, H.

    2018-04-01

    The purpose of this study was to see which method are well used with the Chemistry Triangle-oriented learning media. This quasi experimental research involves first grade of senior high school students in six schools namely each two SMA N in Solok city, in Pasaman and two SMKN in Pariaman. The sampling technique was done by Cluster Random Sampling. Data were collected by test and analyzed by one-way anova and Kruskall Wallish test. The results showed that the high school students in Solok learning taught by cooperative method is better than the results of student learning taught by conventional and Individual methods, both for students who have high initial ability and low-ability. Research in SMK showed that the overall student learning outcomes taught by conventional method is better than the student learning outcomes taught by cooperative and individual methods. Student learning outcomes that have high initial ability taught by individual method is better than student learning outcomes that are taught by cooperative method and for students who have low initial ability, there is no difference in student learning outcomes taught by cooperative, individual and conventional methods. Learning in high school in Pasaman showed no significant difference in learning outcomes of the three methods undertaken.

  3. On a multigrid method for the coupled Stokes and porous media flow problem

    Science.gov (United States)

    Luo, P.; Rodrigo, C.; Gaspar, F. J.; Oosterlee, C. W.

    2017-07-01

    The multigrid solution of coupled porous media and Stokes flow problems is considered. The Darcy equation as the saturated porous medium model is coupled to the Stokes equations by means of appropriate interface conditions. We focus on an efficient multigrid solution technique for the coupled problem, which is discretized by finite volumes on staggered grids, giving rise to a saddle point linear system. Special treatment is required regarding the discretization at the interface. An Uzawa smoother is employed in multigrid, which is a decoupled procedure based on symmetric Gauss-Seidel smoothing for velocity components and a simple Richardson iteration for the pressure field. Since a relaxation parameter is part of a Richardson iteration, Local Fourier Analysis (LFA) is applied to determine the optimal parameters. Highly satisfactory multigrid convergence is reported, and, moreover, the algorithm performs well for small values of the hydraulic conductivity and fluid viscosity, that are relevant for applications.

  4. Self-diffusion in periodic porous media: a comparison of numerical simulation and eigenvalue methods.

    Science.gov (United States)

    Schwartz, L M; Bergman, D J; Dunn, K J; Mitra, P P

    1996-01-01

    Random walk computer simulations are an important tool in understanding magnetic resonance measurements in porous media. In this paper we focus on the description of pulsed field gradient spin echo (PGSE) experiments that measure the probability, P(R,t), that a diffusing water molecule will travel a distance R in a time t. Because PGSE simulations are often limited by statistical considerations, we will see that valuable insight can be gained by working with simple periodic geometries and comparing simulation data to the results of exact eigenvalue expansions. In this connection, our attention will be focused on (1) the wavevector, k, and time dependent magnetization, M(k, t); and (2) the normalized probability, Ps(delta R, t), that a diffusing particle will return to within delta R of the origin after time t.

  5. Rethinking Communication: The Role of Digital Media from Bagozzi and Phillips’ Method

    Directory of Open Access Journals (Sweden)

    Maryalejandra Montiel

    2009-08-01

    Full Text Available The purpose of this paper is to make use of the holistic constructivism, proposed by Bagozzi & Phillips (1982, to provide structure to a methodological – theoretical body that would sustain the research named: “ Communication and Democracy: the role of cybermedia in the building of citizenship”. Its content encloses concepts about communication, digital media and democratization. Finally it elaborates a theoretical network where the theoretical, derived and empirical concepts exposed, as well as the relationships among them. The idea is to approach to accelerating and drastic changes of this 21st century, in view of the growing technological advances and the presence of global processes. The epicenter of these realities is the man and the construction of his world.

  6. The Effect of Plant Cultivar, Growth Media, Harvest Method and Post Harvest Treatment on the Microbiology of Edible Crops

    Science.gov (United States)

    Hummerick, Mary P.; Gates, Justin R.; Nguyen, Bao-Thang; Massa, Gioia D.; Wheeler, Raymond M.

    2011-01-01

    Systems for the growth of crops in closed environments are being developed and tested for potential use in space applications to provide a source of fresh food. Plant growth conditions, growth media composition and harvest methods can have an effect on the microbial population of the plant, and therefore should be considered along with the optimization of plant growth and harvest yields to ensure a safe and palatable food crop. This work examines the effect of plant cultivar, growth media, and harvest method on plant microbial populations. Twelve varieties of leafy greens and herbs were grown on a mixture of Fafard #2 and Arcillite in the pillow root containment system currently being considered for the VEGGIE plant growth unit developed by Orbitec. In addition, ,Sierra and Outredgeous lettuce varieties were grown in three different mixtures (Fafard #2, Ardllite, and Perlite/Vermiculite). The plants were analyzed for microbial density. Two harvest methods, "cut and come again" (CACA) and terminal harvest were also compared. In one set ofexpe'riments red leaf lettuce and mizuna were grown in pots in a Biomass Production System for education. Plants were harvested every two weeks by either method. Another set of experiments was performed using the rooting pillows to grow 5 varieties of leafy greens and cut harvesting at different intervals. Radishes were harvested and replanted at two-week intervals. Results indicate up to a 3 IOglO difference in microbial counts between some varieties of plants. Rooting medium resulted in an approximately 2 IOglO lower count in the lettuce grown in arscillite then those grown in the other mixtures. Harvest method and frequency had less impact on microbial counts only showing a significant increase in one variety of plant. Post harvest methods to decrease the bacterial counts on edible crops were investigated in these and other experiments. The effectiveness of PRO-SAN and UV-C radiation is compared.

  7. Active-Set Reduced-Space Methods with Nonlinear Elimination for Two-Phase Flow Problems in Porous Media

    KAUST Repository

    Yang, Haijian

    2016-07-26

    Fully implicit methods are drawing more attention in scientific and engineering applications due to the allowance of large time steps in extreme-scale simulations. When using a fully implicit method to solve two-phase flow problems in porous media, one major challenge is the solution of the resultant nonlinear system at each time step. To solve such nonlinear systems, traditional nonlinear iterative methods, such as the class of the Newton methods, often fail to achieve the desired convergent rate due to the high nonlinearity of the system and/or the violation of the boundedness requirement of the saturation. In the paper, we reformulate the two-phase model as a variational inequality that naturally ensures the physical feasibility of the saturation variable. The variational inequality is then solved by an active-set reduced-space method with a nonlinear elimination preconditioner to remove the high nonlinear components that often causes the failure of the nonlinear iteration for convergence. To validate the effectiveness of the proposed method, we compare it with the classical implicit pressure-explicit saturation method for two-phase flow problems with strong heterogeneity. The numerical results show that our nonlinear solver overcomes the often severe limits on the time step associated with existing methods, results in superior convergence performance, and achieves reduction in the total computing time by more than one order of magnitude.

  8. Active-Set Reduced-Space Methods with Nonlinear Elimination for Two-Phase Flow Problems in Porous Media

    KAUST Repository

    Yang, Haijian; Yang, Chao; Sun, Shuyu

    2016-01-01

    Fully implicit methods are drawing more attention in scientific and engineering applications due to the allowance of large time steps in extreme-scale simulations. When using a fully implicit method to solve two-phase flow problems in porous media, one major challenge is the solution of the resultant nonlinear system at each time step. To solve such nonlinear systems, traditional nonlinear iterative methods, such as the class of the Newton methods, often fail to achieve the desired convergent rate due to the high nonlinearity of the system and/or the violation of the boundedness requirement of the saturation. In the paper, we reformulate the two-phase model as a variational inequality that naturally ensures the physical feasibility of the saturation variable. The variational inequality is then solved by an active-set reduced-space method with a nonlinear elimination preconditioner to remove the high nonlinear components that often causes the failure of the nonlinear iteration for convergence. To validate the effectiveness of the proposed method, we compare it with the classical implicit pressure-explicit saturation method for two-phase flow problems with strong heterogeneity. The numerical results show that our nonlinear solver overcomes the often severe limits on the time step associated with existing methods, results in superior convergence performance, and achieves reduction in the total computing time by more than one order of magnitude.

  9. PRECONDITIONED BI-CONJUGATE GRADIENT METHOD FOR RADIATIVE TRANSFER IN SPHERICAL MEDIA

    International Nuclear Information System (INIS)

    Anusha, L. S.; Nagendra, K. N.; Paletou, F.; Leger, L.

    2009-01-01

    A robust numerical method called the Preconditioned Bi-Conjugate Gradient (Pre-BiCG) method is proposed for the solution of the radiative transfer equation in spherical geometry. A variant of this method called Stabilized Preconditioned Bi-Conjugate Gradient (Pre-BiCG-STAB) is also presented. These are iterative methods based on the construction of a set of bi-orthogonal vectors. The application of the Pre-BiCG method in some benchmark tests shows that the method is quite versatile, and can handle difficult problems that may arise in astrophysical radiative transfer theory.

  10. A continuous exchange factor method for radiative exchange in enclosures with participating media

    International Nuclear Information System (INIS)

    Naraghi, M.H.N.; Chung, B.T.F.; Litkouhi, B.

    1987-01-01

    A continuous exchange factor method for analysis of radiative exchange in enclosures is developed. In this method two types of exchange functions are defined, direct exchange function and total exchange function. Certain integral equations relating total exchange functions to direct exchange functions are developed. These integral equations are solved using Gaussian quadrature integration method. The results obtained based on the present approach are found to be more accurate than those of the zonal method

  11. A stable high-order perturbation of surfaces method for numerical simulation of diffraction problems in triply layered media

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Youngjoon, E-mail: hongy@uic.edu; Nicholls, David P., E-mail: davidn@uic.edu

    2017-02-01

    The accurate numerical simulation of linear waves interacting with periodic layered media is a crucial capability in engineering applications. In this contribution we study the stable and high-order accurate numerical simulation of the interaction of linear, time-harmonic waves with a periodic, triply layered medium with irregular interfaces. In contrast with volumetric approaches, High-Order Perturbation of Surfaces (HOPS) algorithms are inexpensive interfacial methods which rapidly and recursively estimate scattering returns by perturbation of the interface shape. In comparison with Boundary Integral/Element Methods, the stable HOPS algorithm we describe here does not require specialized quadrature rules, periodization strategies, or the solution of dense non-symmetric positive definite linear systems. In addition, the algorithm is provably stable as opposed to other classical HOPS approaches. With numerical experiments we show the remarkable efficiency, fidelity, and accuracy one can achieve with an implementation of this algorithm.

  12. Quantitative fluorescence lifetime spectroscopy in turbid media: comparison of theoretical, experimental and computational methods

    International Nuclear Information System (INIS)

    Vishwanath, Karthik; Mycek, Mary-Ann; Pogue, Brian

    2002-01-01

    A Monte Carlo model developed to simulate time-resolved fluorescence propagation in a semi-infinite turbid medium was validated against previously reported theoretical and computational results. Model simulations were compared to experimental measurements of fluorescence spectra and lifetimes on tissue-simulating phantoms for single and dual fibre-optic probe geometries. Experiments and simulations using a single probe revealed that scattering-induced artefacts appeared in fluorescence emission spectra, while fluorescence lifetimes were unchanged. Although fluorescence lifetime measurements are generally more robust to scattering artefacts than are measurements of fluorescence spectra, in the dual-probe geometry scattering-induced changes in apparent lifetime were predicted both from diffusion theory and via Monte Carlo simulation, as well as measured experimentally. In all cases, the recovered apparent lifetime increased with increasing scattering and increasing source-detector separation. Diffusion theory consistently underestimated the magnitude of these increases in apparent lifetime (predicting a maximum increase of ∼15%), while Monte Carlo simulations and experiment were closely matched (showing increases as large as 30%). These results indicate that quantitative simulations of time-resolved fluorescence propagation in turbid media will be important for accurate recovery of fluorophore lifetimes in biological spectroscopy and imaging applications. (author)

  13. THE RELATIONSHIP AMONG THE NEWS MEDIA, SOCIETY, AND CULTURE: THOUGHTS ON OBJECTIVITY, METHOD AND PASSION

    Directory of Open Access Journals (Sweden)

    Gaye Tuchman

    2010-01-01

    Full Text Available I have a colleague in the Department of Journalism who speaks about his work with a degree of passion that one usually doesn‘t hear in academic circles. An expert on Central Asian reporters. he covers reporters and editors working – or trying to work -- in these authoritarian countries that were once part of the Soviet Union. My colleague‘s department head lauds his dedication and expertise. He gathers information with such consummate skill, she advises, that central Asian reporters risk being quoted in his articles. Asked why he writes about the problems journalists face in these countries, my colleague talks about journalism, freedom of speech, and democracy. His voice resonates with fervor. ―Those countries are undemocratic,‖ he proclaims. ―There can be no democracy without a free press. I write about the problems these reporters and editors face…because they have to be free for us to be free.‖ (My colleague does not discuss how notions of freedom of expression vary from one media system to another; to him, this freedom is an absolute right.

  14. Fast methods of fungal and bacterial identification. MALDI-TOF mass spectrometry, chromogenic media.

    Science.gov (United States)

    Siller-Ruiz, María; Hernández-Egido, Sara; Sánchez-Juanes, Fernando; González-Buitrago, José Manuel; Muñoz-Bellido, Juan Luis

    2017-05-01

    MALDI-TOF mass spectrometry is now a routine resource in Clinical Microbiology, because of its speed and reliability in the identification of microorganisms. Its performance in the identification of bacteria and yeasts is perfectly contrasted. The identification of mycobacteria and moulds is more complex, due to the heterogeneity of spectra within each species. The methodology is somewhat more complex, and expanding the size of species libraries, and the number of spectra of each species, will be crucial to achieve greater efficiency. Direct identification from blood cultures has been implemented, since its contribution to the management of severe patients is evident, but its application to other samples is more complex. Chromogenic media have also contributed to the rapid diagnosis in both bacteria and yeast, since they accelerate the diagnosis, facilitate the detection of mixed cultures and allow rapid diagnosis of resistant species. Copyright © 2017 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  15. Towards Improving the Efficiency of Bayesian Model Averaging Analysis for Flow in Porous Media via the Probabilistic Collocation Method

    Directory of Open Access Journals (Sweden)

    Liang Xue

    2018-04-01

    Full Text Available The characterization of flow in subsurface porous media is associated with high uncertainty. To better quantify the uncertainty of groundwater systems, it is necessary to consider the model uncertainty. Multi-model uncertainty analysis can be performed in the Bayesian model averaging (BMA framework. However, the BMA analysis via Monte Carlo method is time consuming because it requires many forward model evaluations. A computationally efficient BMA analysis framework is proposed by using the probabilistic collocation method to construct a response surface model, where the log hydraulic conductivity field and hydraulic head are expanded into polynomials through Karhunen–Loeve and polynomial chaos methods. A synthetic test is designed to validate the proposed response surface analysis method. The results show that the posterior model weight and the key statistics in BMA framework can be accurately estimated. The relative errors of mean and total variance in the BMA analysis results are just approximately 0.013% and 1.18%, but the proposed method can be 16 times more computationally efficient than the traditional BMA method.

  16. Pseudo-spectral method using rotated staggered grid for elastic wave propagation in 3D arbitrary anisotropic media

    KAUST Repository

    Zou, Peng

    2017-05-10

    Staggering grid is a very effective way to reduce the Nyquist errors and to suppress the non-causal ringing artefacts in the pseudo-spectral solution of first-order elastic wave equations. However, the straightforward use of a staggered-grid pseudo-spectral method is problematic for simulating wave propagation when the anisotropy level is greater than orthorhombic or when the anisotropic symmetries are not aligned with the computational grids. Inspired by the idea of rotated staggered-grid finite-difference method, we propose a modified pseudo-spectral method for wave propagation in arbitrary anisotropic media. Compared with an existing remedy of staggered-grid pseudo-spectral method based on stiffness matrix decomposition and a possible alternative using the Lebedev grids, the rotated staggered-grid-based pseudo-spectral method possesses the best balance between the mitigation of artefacts and efficiency. A 2D example on a transversely isotropic model with tilted symmetry axis verifies its effectiveness to suppress the ringing artefacts. Two 3D examples of increasing anisotropy levels demonstrate that the rotated staggered-grid-based pseudo-spectral method can successfully simulate complex wavefields in such anisotropic formations.

  17. News media and the stock market: Assessing mutual relationships : An interdisciplinary multi-method study of financial journalism, news media, emotions, market events and the stock market

    NARCIS (Netherlands)

    Strauß, N.

    2018-01-01

    This dissertation provides insights in explaining the interrelationships between news media and the stock market. First, the results show that first-hand economic news seems to induce stronger, and more immediate stock market reactions than already known public information. Second, public economic

  18. Chemical sensors and the development of potentiometric methods for liquid media analysis

    International Nuclear Information System (INIS)

    Vlasov, Yu.G.; Kolodnikov, V.V.; Ermolenko, Yu.E.; Mikhajlova, S.S.

    1996-01-01

    Aspects of applying indirect potentiometric determination to chemical analysis are considered. Among them are the standard and modified addition and subtraction methods, the multiple addition method, and potentiometric titration using ion-selective electrodes as indicators. These methods significantly extend the capabilities of ion-selective potentiometric analysis. Conditions for the applicability of the above-mentioned methods to various samples (Cd, REE, Th, iodides and others) are discussed using all available ion-selective electrodes as examples. 162 refs., 2 figs., 5 tabs

  19. Apparatus and method for qualitative and quantitative measurements of optical properties of turbid media using frequency-domain photon migration

    Science.gov (United States)

    Tromberg, B.J.; Tsay, T.T.; Berns, M.W.; Svaasand, L.O.; Haskell, R.C.

    1995-06-13

    Optical measurements of turbid media, that is media characterized by multiple light scattering, is provided through an apparatus and method for exposing a sample to a modulated laser beam. The light beam is modulated at a fundamental frequency and at a plurality of integer harmonics thereof. Modulated light is returned from the sample and preferentially detected at cross frequencies at frequencies slightly higher than the fundamental frequency and at integer harmonics of the same. The received radiance at the beat or cross frequencies is compared against a reference signal to provide a measure of the phase lag of the radiance and modulation ratio relative to a reference beam. The phase and modulation amplitude are then provided as a frequency spectrum by an array processor to which a computer applies a complete curve fit in the case of highly scattering samples or a linear curve fit below a predetermined frequency in the case of highly absorptive samples. The curve fit in any case is determined by the absorption and scattering coefficients together with a concentration of the active substance in the sample. Therefore, the curve fitting to the frequency spectrum can be used both for qualitative and quantitative analysis of substances in the sample even though the sample is highly turbid. 14 figs.

  20. One-step leapfrog ADI-FDTD method for simulating electromagnetic wave propagation in general dispersive media.

    Science.gov (United States)

    Wang, Xiang-Hua; Yin, Wen-Yan; Chen, Zhi Zhang David

    2013-09-09

    The one-step leapfrog alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method is reformulated for simulating general electrically dispersive media. It models material dispersive properties with equivalent polarization currents. These currents are then solved with the auxiliary differential equation (ADE) and then incorporated into the one-step leapfrog ADI-FDTD method. The final equations are presented in the form similar to that of the conventional FDTD method but with second-order perturbation. The adapted method is then applied to characterize (a) electromagnetic wave propagation in a rectangular waveguide loaded with a magnetized plasma slab, (b) transmission coefficient of a plane wave normally incident on a monolayer graphene sheet biased by a magnetostatic field, and (c) surface plasmon polaritons (SPPs) propagation along a monolayer graphene sheet biased by an electrostatic field. The numerical results verify the stability, accuracy and computational efficiency of the proposed one-step leapfrog ADI-FDTD algorithm in comparison with analytical results and the results obtained with the other methods.

  1. Adaptive mixed-hybrid and penalty discontinuous Galerkin method for two-phase flow in heterogeneous media

    KAUST Repository

    Hou, Jiangyong

    2016-02-05

    In this paper, we present a hybrid method, which consists of a mixed-hybrid finite element method and a penalty discontinuous Galerkin method, for the approximation of a fractional flow formulation of a two-phase flow problem in heterogeneous media with discontinuous capillary pressure. The fractional flow formulation is comprised of a wetting phase pressure equation and a wetting phase saturation equation which are coupled through a total velocity and the saturation affected coefficients. For the wetting phase pressure equation, the continuous mixed-hybrid finite element method space can be utilized due to a fundamental property that the wetting phase pressure is continuous. While it can reduce the computational cost by using less degrees of freedom and avoiding the post-processing of velocity reconstruction, this method can also keep several good properties of the discontinuous Galerkin method, which are important to the fractional flow formulation, such as the local mass balance, continuous normal flux and capability of handling the discontinuous capillary pressure. For the wetting phase saturation equation, the penalty discontinuous Galerkin method is utilized due to its capability of handling the discontinuous jump of the wetting phase saturation. Furthermore, an adaptive algorithm for the hybrid method together with the centroidal Voronoi Delaunay triangulation technique is proposed. Five numerical examples are presented to illustrate the features of proposed numerical method, such as the optimal convergence order, the accurate and efficient velocity approximation, and the applicability to the simulation of water flooding in oil field and the oil-trapping or barrier effect phenomena.

  2. Adaptive mixed-hybrid and penalty discontinuous Galerkin method for two-phase flow in heterogeneous media

    KAUST Repository

    Hou, Jiangyong; Chen, Jie; Sun, Shuyu; Chen, Zhangxin

    2016-01-01

    In this paper, we present a hybrid method, which consists of a mixed-hybrid finite element method and a penalty discontinuous Galerkin method, for the approximation of a fractional flow formulation of a two-phase flow problem in heterogeneous media with discontinuous capillary pressure. The fractional flow formulation is comprised of a wetting phase pressure equation and a wetting phase saturation equation which are coupled through a total velocity and the saturation affected coefficients. For the wetting phase pressure equation, the continuous mixed-hybrid finite element method space can be utilized due to a fundamental property that the wetting phase pressure is continuous. While it can reduce the computational cost by using less degrees of freedom and avoiding the post-processing of velocity reconstruction, this method can also keep several good properties of the discontinuous Galerkin method, which are important to the fractional flow formulation, such as the local mass balance, continuous normal flux and capability of handling the discontinuous capillary pressure. For the wetting phase saturation equation, the penalty discontinuous Galerkin method is utilized due to its capability of handling the discontinuous jump of the wetting phase saturation. Furthermore, an adaptive algorithm for the hybrid method together with the centroidal Voronoi Delaunay triangulation technique is proposed. Five numerical examples are presented to illustrate the features of proposed numerical method, such as the optimal convergence order, the accurate and efficient velocity approximation, and the applicability to the simulation of water flooding in oil field and the oil-trapping or barrier effect phenomena.

  3. Determination of diffusion parameters of Thermal neutrons for non-moderator media by a pulsed method and a time independent method

    International Nuclear Information System (INIS)

    Boufraqech, A.

    1991-01-01

    Two methods for determining the diffusion parameters of thermal neutrons for non-moderator and non-multiplicator media have been developped: The first one, which is a pulsed method, is based on thermal neutrons relaxation coefficients measurement in a moderator, with and without the medium of interest that plays the role of reflector. For the experimental results interpretation using the diffusion theory, a corrective factor which takes into account the neutron cooling by diffusion has been introduced. Its dependence on the empirically obtained relaxation coefficients is in a good agreement with the calculations made in P3L2 approximation. The difference between linear extrapolation lengths of the moderator and the reflector has been taken into account, by developping the scalar fluxes in Bessel function series which automatically satisfy the boundary conditions at the extra-polated surfaces of the two media. The obtained results for Iron are in a good agreement with those in the literature. The second method is time independent, based on the 'flux albedo' measurements interpretation (Concept introduced by Amaldi and Fermi) by P3 approximation in the one group trans-port theory. The independent sources are introduced in the Marshak boundary conditions. An angular albedo matrix has been used to deal with multiple reflections and to take into account the distortion of the current vector when entring a medium, after being reflected by this latter. The results obtained by this method are slightly different from those given in the literature. The analysis of the possible sources causing this discrepancy, particulary the radial distribution of flux in cylindrical geometry and the flux depression at medium-black body interface, has shown that the origin of this discrepancy is the neutron heating by diffusion. 47 figs., 20 tabs., 39 refs. (author)

  4. Nonuniform grid implicit spatial finite difference method for acoustic wave modeling in tilted transversely isotropic media

    KAUST Repository

    Chu, Chunlei; Stoffa, Paul L.

    2012-01-01

    sampled models onto vertically nonuniform grids. We use a 2D TTI salt model to demonstrate its effectiveness and show that the nonuniform grid implicit spatial finite difference method can produce highly accurate seismic modeling results with enhanced

  5. Expanded Mixed Multiscale Finite Element Methods and Their Applications for Flows in Porous Media

    KAUST Repository

    Jiang, L.; Copeland, D.; Moulton, J. D.

    2012-01-01

    We develop a family of expanded mixed multiscale finite element methods (MsFEMs) and their hybridizations for second-order elliptic equations. This formulation expands the standard mixed multiscale finite element formulation in the sense that four

  6. Fast Swinnex Filtration (FSF): A fast and robust sampling and extraction method suitable for metabolomics analysis of cultures grown in complex media

    DEFF Research Database (Denmark)

    McCloskey, Douglas; Utrilla, Jose; Naviaux, Robert K.

    2015-01-01

    , we develop a fast-filtration method using pressuredriven Swinnex filters. We show that the method is fast enough to provide an accurate snapshot of intracellular metabolism, reduces matrix interference from the media to improve the number of compounds that can be detected, and is applicable...... to anaerobic and aerobic liquid cultures grown in a variety of culturing systems. Furthermore, we apply the fast filtration method to investigate differences in the absolute intracellular metabolite levels of anaerobic cultures grown in minimal and complex media....

  7. Radiometric emanation method for the assessment of the durability of building materials towards aggressive media

    International Nuclear Information System (INIS)

    Balek, V.; Beckman, I.N.

    1991-01-01

    A new express method has been suggested for testing durability of building materials in contact with aggressive liquids and gases. The method is based on the measurement of radon released from samples studied, continuously during the interaction of the sample with the aggressive medium. The samples are previously labeled by the source of radon atoms, i.e. thorium Th-228 and radium Ra-224 are incorporated in the samples to be tested. Due to high sensitivity of the method the first stages of the interaction between the cement stone (concrete) sample and aggressive liquid or gas can be followed. The express information about the relative durability of the building materials was obtained. This method was also advantageously used for the investigation of corrosion early stage of marble (calcium carbonate) by sulphur dioxide (in the concentrations of 500-3,000 ppm). The most advantageous application of the method is for rapid assessment of the relative durability of building materials, e.g. the information about the relative durability of the samples studied was obtained within several minutes, resp. hours, whereas by means of traditional chemical methods it needs several weeks or months

  8. Numerical investigations of two-phase flow with dynamic capillary pressure in porous media via a moving mesh method

    Science.gov (United States)

    Zhang, Hong; Zegeling, Paul Andries

    2017-09-01

    Motivated by observations of saturation overshoot, this paper investigates numerical modeling of two-phase flow in porous media incorporating dynamic capillary pressure. The effects of the dynamic capillary coefficient, the infiltrating flux rate and the initial and boundary values are systematically studied using a traveling wave ansatz and efficient numerical methods. The traveling wave solutions may exhibit monotonic, non-monotonic or plateau-shaped behavior. Special attention is paid to the non-monotonic profiles. The traveling wave results are confirmed by numerically solving the partial differential equation using an accurate adaptive moving mesh solver. Comparisons between the computed solutions using the Brooks-Corey model and the laboratory measurements of saturation overshoot verify the effectiveness of our approach.

  9. Upwind discontinuous Galerkin methods with mass conservation of both phases for incompressible two-phase flow in porous media

    KAUST Repository

    Kou, Jisheng; Sun, Shuyu

    2014-01-01

    Discontinuous Galerkin methods with interior penalties and upwind schemes are applied to the original formulation modeling incompressible two-phase flow in porous media with the capillary pressure. The pressure equation is obtained by summing the discretized conservation equations of two phases. This treatment is very different from the conventional approaches, and its great merit is that the mass conservations hold for both phases instead of only one phase in the conventional schemes. By constructing a new continuous map and using the fixed-point theorem, we prove the global existence of discrete solutions under the proper conditions, and furthermore, we obtain a priori hp error estimates of the pressures in L 2 (H 1) and the saturations in L ∞(L 2) and L 2 (H 1). © 2014 Wiley Periodicals, Inc.

  10. Upwind discontinuous Galerkin methods with mass conservation of both phases for incompressible two-phase flow in porous media

    KAUST Repository

    Kou, Jisheng

    2014-03-22

    Discontinuous Galerkin methods with interior penalties and upwind schemes are applied to the original formulation modeling incompressible two-phase flow in porous media with the capillary pressure. The pressure equation is obtained by summing the discretized conservation equations of two phases. This treatment is very different from the conventional approaches, and its great merit is that the mass conservations hold for both phases instead of only one phase in the conventional schemes. By constructing a new continuous map and using the fixed-point theorem, we prove the global existence of discrete solutions under the proper conditions, and furthermore, we obtain a priori hp error estimates of the pressures in L 2 (H 1) and the saturations in L ∞(L 2) and L 2 (H 1). © 2014 Wiley Periodicals, Inc.

  11. Simultaneous Determination of Eosin-Yellow and Ponceau-S Using H-Point Standard Addition Method in Micellar Media

    Directory of Open Access Journals (Sweden)

    Amandeep Kaur

    2012-01-01

    Full Text Available H-point standard addition method (HPSAM is developed for simultaneous determination of eosin-Y and ponceau-s in micellar media. Nickel chloride (NiCl2 is used as chromogenic reagent for complexes formation of eosin-Y and ponceau-S food colorants. The measurements were carried out using sodium lauryl sulphate as a surfactant, in buffered solution at pH 6.0. The concentration range of 0.115-2.53 μg/mL of eosin-Y and 0.159-3.80 μg/mL of ponceau-S. The proposed procedures have been applied successfully for the simultaneous determination of eosin-Y and ponceau-S in synthetic binary mixtures and real samples.

  12. Complex-envelope alternating-direction-implicit FDTD method for simulating active photonic devices with semiconductor/solid-state media.

    Science.gov (United States)

    Singh, Gurpreet; Ravi, Koustuban; Wang, Qian; Ho, Seng-Tiong

    2012-06-15

    A complex-envelope (CE) alternating-direction-implicit (ADI) finite-difference time-domain (FDTD) approach to treat light-matter interaction self-consistently with electromagnetic field evolution for efficient simulations of active photonic devices is presented for the first time (to our best knowledge). The active medium (AM) is modeled using an efficient multilevel system of carrier rate equations to yield the correct carrier distributions, suitable for modeling semiconductor/solid-state media accurately. To include the AM in the CE-ADI-FDTD method, a first-order differential system involving CE fields in the AM is first set up. The system matrix that includes AM parameters is then split into two time-dependent submatrices that are then used in an efficient ADI splitting formula. The proposed CE-ADI-FDTD approach with AM takes 22% of the time as the approach of the corresponding explicit FDTD, as validated by semiconductor microdisk laser simulations.

  13. Method Development for Binding Media Analysis in Painting Cross-Sections by Desorption Electrospray Ionization-Mass Spectrometry (DESI-MS).

    Science.gov (United States)

    Watts, Kristen; Lagalante, Anthony

    2018-06-06

    Art conservation science is in need of a relatively nondestructive way of rapidly identifying the binding media within a painting cross-section and isolating binding media to specific layers within the cross-section. Knowledge of the stratigraphy of cross-sections can be helpful for removing possible unoriginal paint layers on the artistic work. Desorption electrospray ionization-mass spectrometry (DESI-MS) was used in ambient mode to study cross-sections from mock-up layered paint samples and samples from a 17th century baroque painting. The DESI spray was raster scanned perpendicular to the cross-section layers to maximize lateral resolution then analyzed with a triple quadrupole mass analyzer in linear ion trap mode. From these scans, isobaric mass maps were created to map the locations of masses indicative of particular binding media onto the cross-sections. Line paint-outs of pigments in different binding media showed specific and unique ions to distinguish between the modern acrylic media and the lipid containing binding media. This included: OP (EO) 9 surfactant in positive ESI for acrylic (m/z 621), and oleic (m/z 281), stearic (m/z 283), and azelaic (m/z 187) acids in negative ESI for oil and egg tempera. DESI-MS maps of mock-up cross-sections of layered pigmented binding media showed correlation between these ions and the layers with a spatial resolution of 100 μm. DESI-MS is effective in monitoring binding media within an intact painting cross-section via mass spectrometric methods. This includes distinguishing between lipid-containing and modern binding materials present in a known mockup cross section matrix as well as identifying lipid binding media in a 17th century baroque era painting. This article is protected by copyright. All rights reserved.

  14. Discretization limits of multi-component lattice-Boltzmann methods and implications on the real porous media simulations

    Science.gov (United States)

    Herring, A. L.; Li, Z.; Middleton, J.; Varslot, T.; McClure, J. E.; Sheppard, A.

    2017-12-01

    Multicomponent lattice-Boltzmann (LB) modeling is widely applied to study two-phase flow in various porous media. However, the impact on LB modeling of the fundamental trade-off between image resolution and field of view has received relatively little attention. This is important since 3D images of geological samples rarely have both sufficient resolution to capture fine structure and sufficient field of view to capture a full representative elementary volume of the medium. To optimize the simulations, it is important to know the minimum number of grid points that LB methods require to deliver physically meaningful results, and allow for the sources of measurement uncertainty to be appropriately balanced. In this work, we study the behavior of the Shan-Chen (SC) and Rothman-Keller (RK) models when the phase interfacial radius of curvature and the feature size of the medium approach the discrete unit size of the computational grid. Both simple, small-scale test geometries and real porous media are considered. Models' behavior in the extreme discrete limit is classified ranging from gradual loss of accuracy to catastrophic numerical breakdown. Based on this study, we provide guidance for experimental data collection and how to apply the LBM to accurately resolve physics of interest for two-fluid flow in porous media. Resolution effects are particularly relevant to the study of low-porosity systems, including fractured materials, when the typical pore width may only be a few voxels across.Overall, we find that the shortcoming of the SC model predominantly arises from the strongly pressure-dependent miscibility of the fluid components, where small droplets with high interfacial curvature have an exaggerated tendency to dissolve into the surrounding fluid. For the RK model, the most significant shortcoming is unphysical flow of non-wetting phase through narrow channels and crevices (2 voxels across or smaller), which we observed both in simple capillary tube and

  15. SOCIAL MEDIA

    Science.gov (United States)

    RESPONSIBILITY CENTCOM COALITION MEDIA SOCIAL MEDIA NEWS ARTICLES PRESS RELEASES IMAGERY VIDEOS TRANSCRIPTS VISITORS AND PERSONNEL FAMILY CENTER FAMILY READINESS CENTCOM WEBMAIL SOCIAL MEDIA SECURITY ACCOUNTABILITY HomeMEDIASOCIAL MEDIA Social Media CENTCOM'S ENGLISH SOCIAL MEDIA ACCOUNTS There are many U.S. military commands

  16. Electro-osmosis of non-Newtonian fluids in porous media using lattice Poisson-Boltzmann method.

    Science.gov (United States)

    Chen, Simeng; He, Xinting; Bertola, Volfango; Wang, Moran

    2014-12-15

    Electro-osmosis in porous media has many important applications in various areas such as oil and gas exploitation and biomedical detection. Very often, fluids relevant to these applications are non-Newtonian because of the shear-rate dependent viscosity. The purpose of this study was to investigate the behaviors and physical mechanism of electro-osmosis of non-Newtonian fluids in porous media. Model porous microstructures (granular, fibrous, and network) were created by a random generation-growth method. The nonlinear governing equations of electro-kinetic transport for a power-law fluid were solved by the lattice Poisson-Boltzmann method (LPBM). The model results indicate that: (i) the electro-osmosis of non-Newtonian fluids exhibits distinct nonlinear behaviors compared to that of Newtonian fluids; (ii) when the bulk ion concentration or zeta potential is high enough, shear-thinning fluids exhibit higher electro-osmotic permeability, while shear-thickening fluids lead to the higher electro-osmotic permeability for very low bulk ion concentration or zeta potential; (iii) the effect of the porous medium structure depends significantly on the constitutive parameters: for fluids with large constitutive coefficients strongly dependent on the power-law index, the network structure shows the highest electro-osmotic permeability while the granular structure exhibits the lowest permeability on the entire range of power law indices considered; when the dependence of the constitutive coefficient on the power law index is weaker, different behaviors can be observed especially in case of strong shear thinning. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Nonlinearly preconditioned semismooth Newton methods for variational inequality solution of two-phase flow in porous media

    KAUST Repository

    Yang, Haijian

    2016-12-10

    Most existing methods for solving two-phase flow problems in porous media do not take the physically feasible saturation fractions between 0 and 1 into account, which often destroys the numerical accuracy and physical interpretability of the simulation. To calculate the solution without the loss of this basic requirement, we introduce a variational inequality formulation of the saturation equilibrium with a box inequality constraint, and use a conservative finite element method for the spatial discretization and a backward differentiation formula with adaptive time stepping for the temporal integration. The resulting variational inequality system at each time step is solved by using a semismooth Newton algorithm. To accelerate the Newton convergence and improve the robustness, we employ a family of adaptive nonlinear elimination methods as a nonlinear preconditioner. Some numerical results are presented to demonstrate the robustness and efficiency of the proposed algorithm. A comparison is also included to show the superiority of the proposed fully implicit approach over the classical IMplicit Pressure-Explicit Saturation (IMPES) method in terms of the time step size and the total execution time measured on a parallel computer.

  18. Nonlinearly preconditioned semismooth Newton methods for variational inequality solution of two-phase flow in porous media

    KAUST Repository

    Yang, Haijian; Sun, Shuyu; Yang, Chao

    2016-01-01

    Most existing methods for solving two-phase flow problems in porous media do not take the physically feasible saturation fractions between 0 and 1 into account, which often destroys the numerical accuracy and physical interpretability of the simulation. To calculate the solution without the loss of this basic requirement, we introduce a variational inequality formulation of the saturation equilibrium with a box inequality constraint, and use a conservative finite element method for the spatial discretization and a backward differentiation formula with adaptive time stepping for the temporal integration. The resulting variational inequality system at each time step is solved by using a semismooth Newton algorithm. To accelerate the Newton convergence and improve the robustness, we employ a family of adaptive nonlinear elimination methods as a nonlinear preconditioner. Some numerical results are presented to demonstrate the robustness and efficiency of the proposed algorithm. A comparison is also included to show the superiority of the proposed fully implicit approach over the classical IMplicit Pressure-Explicit Saturation (IMPES) method in terms of the time step size and the total execution time measured on a parallel computer.

  19. Full waveform inversion using oriented time-domain imaging method for vertical transverse isotropic media

    KAUST Repository

    Zhang, Zhendong

    2017-07-11

    Full waveform inversion for reection events is limited by its linearized update re-quirements given by a process equivalent to migration. Unless the background velocity model is reasonably accurate, the resulting gradient can have an inaccurate update direction leading the inversion to converge what we refer to as local minima of the objective function. In our approach, we consider mild lateral variation in the model, and thus, use a gradient given by the oriented time-domain imaging method. Specifically, we apply the oriented time-domain imaging on the data residual to obtain the geometrical features of the velocity perturbation. After updating the model in the time domain, we convert the perturbation from the time domain to depth using the average velocity. Considering density is constant, we can expand the conventional 1D impedance inversion method to 2D or 3D velocity inversion within the process of full waveform inversion. This method is not only capable of inverting for velocity, but it is also capable of retrieving anisotropic parameters relying on linearized representations of the reection response. To eliminate the cross-talk artifacts between different parameters, we utilize what we consider being an optimal parametrization for this step. To do so, we extend the prestack time-domain migration image in incident angle dimension to incorporate angular dependence needed by the multiparameter inversion. For simple models, this approach provides an efficient and stable way to do full waveform inversion or modified seismic inversion and makes the anisotropic inversion more practicable. The proposed method still needs kinematically accurate initial models since it only recovers the high-wavenumber part as conventional full waveform inversion method does. Results on synthetic data of isotropic and anisotropic cases illustrate the benefits and limitations of this method.

  20. Sensitivity assessment of direct method for diagnosis of Trichomonas vaginalis in comparison with Dorset Culture media

    Directory of Open Access Journals (Sweden)

    ebrahim badparva

    2010-04-01

    Full Text Available Trichomonas vaginalis is a flagellate protozoan that lives in the genital tract and causes trichomoniasis in women. About 200 million people all over the world are infected with T. vaginalis. There are various methods with different sensitivity and specificity for detection of this parasite, that one of them is direct smear of vaginal secretions which is simpler, rapid and cheaper than other diagnostic methods. Materials and Methods: Demographic data was gathered by a questionnaire which contained different variables. Vaginal secretions samples were taken by spicolum and two swaps that maintained in glucose solution in separate tubes from 160 women referred to health centers of Khorramabad. One of the vaginal samples was examined by direct smear in saline solution and the other was cultured in Dorse medium. Results: Of 160 women suspected of trichomoniasis, 11.8% and 18.75% were positive by direct smear and culture respectively. The sensitivity of the direct method was 63.3%. Our findings indicated that 30% of the infected women belonged to the 31 – 35 age group, which had the most relative frequency of positive cases. Most of the patients (43% were illiterate or had elementary educational level. Conclussion: The sensivity of direct method is 63% in compare to culture ( as a Gold standard , which is ralatively low . Although the efficacy of this test could be imporved by shortening the elapsed time between sampling and examination , use of skilled microscopists , and different samples , but we recommend that more sensitive methods such as culture and PCR should be used .

  1. Procedural Media Representation

    OpenAIRE

    Henrysson, Anders

    2002-01-01

    We present a concept for using procedural techniques to represent media. Procedural methods allow us to represent digital media (2D images, 3D environments etc.) with very little information and to render it photo realistically. Since not all kind of content can be created procedurally, traditional media representations (bitmaps, polygons etc.) must be used as well. We have adopted an object-based media representation where an object can be represented either with a procedure or with its trad...

  2. Integral method for the calculation of Hawking radiation in dispersive media. II. Asymmetric asymptotics.

    Science.gov (United States)

    Robertson, Scott

    2014-11-01

    Analog gravity experiments make feasible the realization of black hole space-times in a laboratory setting and the observational verification of Hawking radiation. Since such analog systems are typically dominated by dispersion, efficient techniques for calculating the predicted Hawking spectrum in the presence of strong dispersion are required. In the preceding paper, an integral method in Fourier space is proposed for stationary 1+1-dimensional backgrounds which are asymptotically symmetric. Here, this method is generalized to backgrounds which are different in the asymptotic regions to the left and right of the scattering region.

  3. PH in Rockwool Propagation Blocks: a Method to Measure the pH Buffer Capacity of Rockwool and Other Mineral Wool Media

    NARCIS (Netherlands)

    Blok, C.; Kaarsemaker, R.C.

    2013-01-01

    Within the framework of the international KIWA quality label for rooting media representatives of plant propagators and the rockwool industry agreed to develop a method to characterize the influence of the rooting medium materials on the pH in cultivation. A method for the characterization of

  4. High Frequency Asymptotic Methods for Traveltimes and Anisotropy Parameter Estimation in Azimuthally Varying Media

    KAUST Repository

    Masmoudi, Nabil

    2014-01-01

    of characteristics which yields the ray tracing equations and the finite difference approaches. In the first part of the Master Thesis, we use the ray tracing method to solve the eikonal equation to get P-waves traveltimes for orthorhombic models with arbitrary

  5. VELOCITY FIELD COMPUTATION IN VIBRATED GRANULAR MEDIA USING AN OPTICAL FLOW BASED MULTISCALE IMAGE ANALYSIS METHOD

    Directory of Open Access Journals (Sweden)

    Johan Debayle

    2011-05-01

    Full Text Available An image analysis method has been developed in order to compute the velocity field of a granular medium (sand grains, mean diameter 600 μm submitted to different kinds of mechanical stresses. The differential method based on optical flow conservation consists in describing a dense motion field with vectors associated to each pixel. A multiscale, coarse-to-fine, analytical approach through tailor sized windows yields the best compromise between accuracy and robustness of the results, while enabling an acceptable computation time. The corresponding algorithmis presented and its validation discussed through different tests. The results of the validation tests of the proposed approach show that the method is satisfactory when attributing specific values to parameters in association with the size of the image analysis window. An application in the case of vibrated sand has been studied. An instrumented laboratory device provides sinusoidal vibrations and enables external optical observations of sand motion in 3D transparent boxes. At 50 Hz, by increasing the relative acceleration G, the onset and development of two convective rolls can be observed. An ultra fast camera records the grain avalanches, and several pairs of images are analysed by the proposed method. The vertical velocity profiles are deduced and allow to precisely quantify the dimensions of the fluidized region as a function of G.

  6. A Green Media Access Method for IEEE 802.15.6 Wireless Body Area Network.

    Science.gov (United States)

    Jacob, Anil K; Jacob, Lillykutty

    2017-09-30

    It is of utmost importance to conserve battery energy to the maximum possible extent in WBAN nodes while collecting and transferring medical data. The IEEE 802.15.6 WBAN standard does not specify any method to conserve energy. This paper focuses on a method to conserve energy in IEEE 802.15.6 WBAN nodes when using CSMA/CA, while simultaneously restricting data delivery delay to the required value as specified in medical applications. The technique is to allow the nodes to sleep all the times except for receiving beacons and for transmitting data frames whenever a data frame enters an empty buffer. The energy consumed by the nodes and the average latency of data frame for periodical arrival of data are found out analytically. The analytical results are validated and also the proposed method is compared with other energy conserving schemes, using Castalia simulation studies. The proposed method shows superior performance in both device lifetime and latency of emergency medical data.

  7. Methods for Determining the Advertising Budget and its Distribution in Different Media

    OpenAIRE

    Serban Comanescu Adrian

    2014-01-01

    The process of determining and establishing the necessary advertising budget is approached based on the situations that precede it. There will be virtually no easy task for marketers, with the risk overvaluation or undervaluation of the budget. To avoid broader range of situations, the company uses specific tools and methods for determining the advertising budget. An advertising budget is established for each product.

  8. Of Mice and Meth: A New Media-Based Neuropsychopharmacology Lab to Teach Research Methods

    Science.gov (United States)

    Hatch, Daniel L.; Zschau, Tony; Hays, Arthur; McAllister, Kristin; Harrison, Michelle; Cate, Kelly L.; Shanks, Ryan A.; Lloyd, Steven A.

    2014-01-01

    This article describes an innovative neuropsychopharmacology laboratory that can be incorporated into any research methods class. The lab consists of a set of interconnected modules centered on observations of methamphetamine-induced behavioral changes in mice and is designed to provide students with an opportunity to acquire basic skills…

  9. A New Method of Measuring Online Media Advertising Effectiveness: Prospective Meta-Analysis in Marketing

    NARCIS (Netherlands)

    G. Liberali (Gui); G.L. Urban (Glen); B.G.C. Dellaert (Benedict); C. Tucker (Catherine); Y. Bart (Yakov); S. Stremersch (Stefan)

    2016-01-01

    textabstractThe authors introduce a new method, prospective meta-analysis in marketing (PMM), to estimate consumer response to online advertising on a large and adaptive scale. They illustrate their approach in a field study in the U.S., China and the Netherlands, covering equivalent ad content on

  10. An Online Generalized Multiscale Discontinuous Galerkin Method (GMsDGM) for Flows in Heterogeneous Media

    KAUST Repository

    Chung, Eric T.

    2017-02-07

    Offline computation is an essential component in most multiscale model reduction techniques. However, there are multiscale problems in which offline procedure is insufficient to give accurate representations of solutions, due to the fact that offline computations are typically performed locally and global information is missing in these offline information. To tackle this difficulty, we develop an online local adaptivity technique for local multiscale model reduction problems. We design new online basis functions within Discontinuous Galerkin method based on local residuals and some optimally estimates. The resulting basis functions are able to capture the solution efficiently and accurately, and are added to the approximation iteratively. Moreover, we show that the iterative procedure is convergent with a rate independent of physical scales if the initial space is chosen carefully. Our analysis also gives a guideline on how to choose the initial space. We present some numerical examples to show the performance of the proposed method.

  11. Methods of removing a constituent from a feed stream using adsorption media

    Science.gov (United States)

    Tranter, Troy J [Idaho Falls, ID; Mann, Nicholas R [Rigby, ID; Todd, Terry A [Aberdeen, ID; Herbst, Ronald S [Idaho Falls, ID

    2011-05-24

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  12. Methods for the computer-generated presentation of spatial objects for blind people on tactile media

    OpenAIRE

    Kurze, Martin

    2010-01-01

    This work first explores existing methods to present graphical information to blind people; focus is put on haptic presentation, i.e. a touchable form of presentation. The work emphasises an approach which does not try to make the existing graphics touchable which were designed with sighted perceivers in mind and thus contain optic hints regarding structure and position of certain geometric features (e.g. occlusion or perspective distortion); rather the presented content itself, the model is ...

  13. Comparison of Three Methods Used in the Diagnosis of Extraesophageal Reflux in Children with Chronic Otitis Media with Effusion

    Directory of Open Access Journals (Sweden)

    Martin Formánek

    2015-01-01

    Full Text Available Objectives. Detection of extraesophageal reflux (EER in children with chronic otitis media with effusion (OME using three different diagnostic methods. Methods. Children between 1 and 7 years with OME who underwent adenoidectomy and myringotomy with insertion of a ventilation tube were included in this prospective study. EER was detected using three methods: oropharyngeal pH was monitored for 24 hours using the Restech system; detection of pepsin in middle ear fluid obtained during myringotomy was done using Peptest, and detection of pepsin in an adenoid specimen was done immunohistochemically. Results. Altogether 21 children were included in the study. Pathological oropharyngeal pH was confirmed in 13/21 (61.9% children. Pepsin in the middle ear fluid was present in 5/21 (23.8% children; these 5 patients were diagnosed with the most severe EER established through monitoring of oropharyngeal pH. No specimen of adenoids tested was positive for pepsin upon immunohistochemical examination. Conclusions. Diagnosis of EER in patients with OME using Restech is sensitive but less specific when compared to the detection of pepsin in middle ear fluid using Peptest. Pepsin in the middle ear was consistently present in patients with RYAN score above 200, and these patients in particular could potentially profit from antireflux therapy.

  14. Methods of using real-time social media technologies for detection and remote monitoring of HIV outcomes.

    Science.gov (United States)

    Young, Sean D; Rivers, Caitlin; Lewis, Bryan

    2014-06-01

    Recent availability of "big data" might be used to study whether and how sexual risk behaviors are communicated on real-time social networking sites and how data might inform HIV prevention and detection. This study seeks to establish methods of using real-time social networking data for HIV prevention by assessing 1) whether geolocated conversations about HIV risk behaviors can be extracted from social networking data, 2) the prevalence and content of these conversations, and 3) the feasibility of using HIV risk-related real-time social media conversations as a method to detect HIV outcomes. In 2012, tweets (N=553,186,061) were collected online and filtered to include those with HIV risk-related keywords (e.g., sexual behaviors and drug use). Data were merged with AIDSVU data on HIV cases. Negative binomial regressions assessed the relationship between HIV risk tweeting and prevalence by county, controlling for socioeconomic status measures. Over 9800 geolocated tweets were extracted and used to create a map displaying the geographical location of HIV-related tweets. There was a significant positive relationship (psocial networking data as a method for evaluating and detecting Human immunodeficiency virus (HIV) risk behaviors and outcomes. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. Porous media microstructure reconstruction using pixel-based and object-based simulated annealing: comparison with other reconstruction methods

    Energy Technology Data Exchange (ETDEWEB)

    Diogenes, Alysson N.; Santos, Luis O.E. dos; Fernandes, Celso P. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil); Appoloni, Carlos R. [Universidade Estadual de Londrina (UEL), PR (Brazil)

    2008-07-01

    The reservoir rocks physical properties are usually obtained in laboratory, through standard experiments. These experiments are often very expensive and time-consuming. Hence, the digital image analysis techniques are a very fast and low cost methodology for physical properties prediction, knowing only geometrical parameters measured from the rock microstructure thin sections. This research analyzes two methods for porous media reconstruction using the relaxation method simulated annealing. Using geometrical parameters measured from rock thin sections, it is possible to construct a three-dimensional (3D) model of the microstructure. We assume statistical homogeneity and isotropy and the 3D model maintains porosity spatial correlation, chord size distribution and d 3-4 distance transform distribution for a pixel-based reconstruction and spatial correlation for an object-based reconstruction. The 2D and 3D preliminary results are compared with microstructures reconstructed by truncated Gaussian methods. As this research is in its beginning, only the 2D results will be presented. (author)

  16. Method and apparatus for scheduling broadcasts in social networks

    KAUST Repository

    Manzoor, Emaad Ahmed

    2016-08-25

    A method, apparatus, and computer readable medium are provided for maximizing consumption of broadcasts by a producer. An example method includes receiving selection of a total number of time slots to use for scheduling broadcasts, and receiving information regarding the producer\\'s followers. The example method further 5 includes identifying, by a processor and based on the received information, discount factors associated with the producer\\'s followers, and calculating, by the processor and based on the received information, a predicted number of competitor broadcasts during each time slot of the total number of time slots. Finally, the example method includes determining, by the processor and based on the discount factors and the predicted 10 number of competitor broadcasts during each time slot, a number of broadcasts for the producer to transmit in each time slot of the total number of time slots.

  17. Method and apparatus for modeling, visualization and analysis of materials

    KAUST Repository

    Aboulhassan, Amal

    2016-08-25

    A method, apparatus, and computer readable medium are provided for modeling of materials and visualization of properties of the materials. An example method includes receiving data describing a set of properties of a material, and computing, by a processor and based on the received data, geometric features of the material. The example method further includes extracting, by the processor, particle paths within the material based on the computed geometric features, and geometrically modeling, by the processor, the material using the geometric features and the extracted particle paths. The example method further includes generating, by the processor and based on the geometric modeling of the material, one or more visualizations regarding the material, and causing display, by a user interface, of the one or more visualizations.

  18. Integral method for the calculation of Hawking radiation in dispersive media. I. Symmetric asymptotics

    Science.gov (United States)

    Robertson, Scott; Leonhardt, Ulf

    2014-11-01

    Hawking radiation has become experimentally testable thanks to the many analog systems which mimic the effects of the event horizon on wave propagation. These systems are typically dominated by dispersion and give rise to a numerically soluble and stable ordinary differential equation only if the rest-frame dispersion relation Ω2(k ) is a polynomial of relatively low degree. Here we present a new method for the calculation of wave scattering in a one-dimensional medium of arbitrary dispersion. It views the wave equation as an integral equation in Fourier space, which can be solved using standard and efficient numerical techniques.

  19. Extension of Fourier methods to the calculation of effective depths in heterogeneous media of arbitrary contour

    International Nuclear Information System (INIS)

    Starkschall, G.

    1986-01-01

    The description of patient contours and internal structures by means of truncated Fourier series can be extended to continuous contours of arbitrary shape and location by expressing the x and z Cartesian coordinates of the contour as independent Fourier series in a parameter t. An analytic equation for the intersection of the contour and a ray line is then written as an equation in the parameter t. The equation can be solved using numerical methods yielding the Cartesian coordinates of the intersection point directly

  20. Absorption and scattering coefficients estimation in two-dimensional participating media using the generalized maximum entropy and Levenberg-Marquardt methods

    International Nuclear Information System (INIS)

    Berrocal T, Mariella J.; Roberty, Nilson C.; Silva Neto, Antonio J.; Universidade Federal, Rio de Janeiro, RJ

    2002-01-01

    The solution of inverse problems in participating media where there is emission, absorption and dispersion of the radiation possesses several applications in engineering and medicine. The objective of this work is to estimative the coefficients of absorption and dispersion in two-dimensional heterogeneous participating media, using in independent form the Generalized Maximum Entropy and Levenberg Marquardt methods. Both methods are based on the solution of the direct problem that is modeled by the Boltzmann equation in cartesian geometry. Some cases testes are presented. (author)

  1. Analysis of Plane-Parallel Electron Beam Propagation in Different Media by Numerical Simulation Methods

    Science.gov (United States)

    Miloichikova, I. A.; Bespalov, V. I.; Krasnykh, A. A.; Stuchebrov, S. G.; Cherepennikov, Yu. M.; Dusaev, R. R.

    2018-04-01

    Simulation by the Monte Carlo method is widely used to calculate the character of ionizing radiation interaction with substance. A wide variety of programs based on the given method allows users to choose the most suitable package for solving computational problems. In turn, it is important to know exactly restrictions of numerical systems to avoid gross errors. Results of estimation of the feasibility of application of the program PCLab (Computer Laboratory, version 9.9) for numerical simulation of the electron energy distribution absorbed in beryllium, aluminum, gold, and water for industrial, research, and clinical beams are presented. The data obtained using programs ITS and Geant4 being the most popular software packages for solving the given problems and the program PCLab are presented in the graphic form. A comparison and an analysis of the results obtained demonstrate the feasibility of application of the program PCLab for simulation of the absorbed energy distribution and dose of electrons in various materials for energies in the range 1-20 MeV.

  2. Multi-parameter Analysis and Inversion for Anisotropic Media Using the Scattering Integral Method

    KAUST Repository

    Djebbi, Ramzi

    2017-10-24

    The main goal in seismic exploration is to identify locations of hydrocarbons reservoirs and give insights on where to drill new wells. Therefore, estimating an Earth model that represents the right physics of the Earth\\'s subsurface is crucial in identifying these targets. Recent seismic data, with long offsets and wide azimuth features, are more sensitive to anisotropy. Accordingly, multiple anisotropic parameters need to be extracted from the recorded data on the surface to properly describe the model. I study the prospect of applying a scattering integral approach for multi-parameter inversion for a transversely isotropic model with a vertical axis of symmetry. I mainly analyze the sensitivity kernels to understand the sensitivity of seismic data to anisotropy parameters. Then, I use a frequency domain scattering integral approach to invert for the optimal parameterization. The scattering integral approach is based on the explicit computation of the sensitivity kernels. I present a new method to compute the traveltime sensitivity kernels for wave equation tomography using the unwrapped phase. I show that the new kernels are a better alternative to conventional cross-correlation/Rytov kernels. I also derive and analyze the sensitivity kernels for a transversely isotropic model with a vertical axis of symmetry. The kernels structure, for various opening/scattering angles, highlights the trade-off regions between the parameters. For a surface recorded data, I show that the normal move-out velocity vn, ƞ and δ parameterization is suitable for a simultaneous inversion of diving waves and reflections. Moreover, when seismic data is inverted hierarchically, the horizontal velocity vh, ƞ and ϵ is the parameterization with the least trade-off. In the frequency domain, the hierarchical inversion approach is naturally implemented using frequency continuation, which makes vh, ƞ and ϵ parameterization attractive. I formulate the multi-parameter inversion using the

  3. Development of methods to evaluate uranium distribution coefficients in unsaturated media

    International Nuclear Information System (INIS)

    Sautman, M.T.; Simonson, S.A.

    1993-01-01

    To date, batch sorption and dynamic column experiments have been performed for many elements as part of site characterization programs. These experiments were often conducted with samples having relatively high liquid/solid ratios (in some cases the solid volume was much smaller than the solution volume). The development of methods for measuring sorption parameters at low liquid/solid ratios was undertaken to attempt to judge whether or not results of saturated experiments are valid for use in performance assessments of sites located in unsaturated rocks. The amount of hydrologic saturation can affect the ionic strength, pH, and redox potential which can in turn affect sorption. In addition, the presence of the gas phase may affect the amount of wetting occurring on the solid's surface. This paper describes experimental procedures which were developed to evaluate the sorption of uranium by silica sand at predetermined levels of unsaturation

  4. A novel full-field experimental method to measure the local compressibility of gas diffusion media

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Yeh-Hung; Li, Yongqiang [Electrochemical Energy Research Lab, GM R and D, Honeoye Falls, NY 14472 (United States); Rock, Jeffrey A. [GM Powertrain, Honeoye Falls, NY 14472 (United States)

    2010-05-15

    The gas diffusion medium (GDM) in a proton exchange membrane (PEM) fuel cell needs to simultaneously satisfy the requirements of transporting reactant gases, removing product water, conducting electrons and heat, and providing mechanical support to the membrane electrode assembly (MEA). Concerning the localized over-compression which may force carbon fibers and other conductive debris into the membrane to cause fuel cell failure by electronically shorting through the membrane, we have developed a novel full-field experimental method to measure the local thickness and compressibility of GDM. Applying a uniform air pressure upon a thin polyimide film bonded on the top surface of the GDM with support from the bottom by a flat metal substrate and measuring the thickness change using the 3-D digital image correlation technique with an out-of-plane displacement resolution less than 0.5 {mu}m, we have determined the local thickness and compressive stress/strain behavior in the GDM. Using the local thickness and compressibility data over an area of 11.2 mm x 11.2 mm, we numerically construct the nominal compressive response of a commercial Toray trademark TGP-H-060 based GDM subjected to compression by flat platens. Good agreement in the nominal stress/strain curves from the numerical construction and direct experimental flat-platen measurement confirms the validity of the methodology proposed in this article. The result shows that a nominal pressure of 1.4 MPa compressed between two flat platens can introduce localized compressive stress concentration of more than 3 MPa in up to 1% of the total area at various locations from several hundred micrometers to 1 mm in diameter. We believe that this full-field experimental method can be useful in GDM material and process development to reduce the local hard spots and help to mitigate the membrane shorting failure in PEM fuel cells. (author)

  5. A novel full-field experimental method to measure the local compressibility of gas diffusion media

    Science.gov (United States)

    Lai, Yeh-Hung; Li, Yongqiang; Rock, Jeffrey A.

    The gas diffusion medium (GDM) in a proton exchange membrane (PEM) fuel cell needs to simultaneously satisfy the requirements of transporting reactant gases, removing product water, conducting electrons and heat, and providing mechanical support to the membrane electrode assembly (MEA). Concerning the localized over-compression which may force carbon fibers and other conductive debris into the membrane to cause fuel cell failure by electronically shorting through the membrane, we have developed a novel full-field experimental method to measure the local thickness and compressibility of GDM. Applying a uniform air pressure upon a thin polyimide film bonded on the top surface of the GDM with support from the bottom by a flat metal substrate and measuring the thickness change using the 3-D digital image correlation technique with an out-of-plane displacement resolution less than 0.5 μm, we have determined the local thickness and compressive stress/strain behavior in the GDM. Using the local thickness and compressibility data over an area of 11.2 mm × 11.2 mm, we numerically construct the nominal compressive response of a commercial Toray™ TGP-H-060 based GDM subjected to compression by flat platens. Good agreement in the nominal stress/strain curves from the numerical construction and direct experimental flat-platen measurement confirms the validity of the methodology proposed in this article. The result shows that a nominal pressure of 1.4 MPa compressed between two flat platens can introduce localized compressive stress concentration of more than 3 MPa in up to 1% of the total area at various locations from several hundred micrometers to 1 mm in diameter. We believe that this full-field experimental method can be useful in GDM material and process development to reduce the local hard spots and help to mitigate the membrane shorting failure in PEM fuel cells.

  6. 3-D numerical investigation of subsurface flow in anisotropic porous media using multipoint flux approximation method

    KAUST Repository

    Negara, Ardiansyah

    2013-01-01

    Anisotropy of hydraulic properties of subsurface geologic formations is an essential feature that has been established as a consequence of the different geologic processes that they undergo during the longer geologic time scale. With respect to petroleum reservoirs, in many cases, anisotropy plays significant role in dictating the direction of flow that becomes no longer dependent only on the pressure gradient direction but also on the principal directions of anisotropy. Furthermore, in complex systems involving the flow of multiphase fluids in which the gravity and the capillarity play an important role, anisotropy can also have important influences. Therefore, there has been great deal of motivation to consider anisotropy when solving the governing conservation laws numerically. Unfortunately, the two-point flux approximation of finite difference approach is not capable of handling full tensor permeability fields. Lately, however, it has been possible to adapt the multipoint flux approximation that can handle anisotropy to the framework of finite difference schemes. In multipoint flux approximation method, the stencil of approximation is more involved, i.e., it requires the involvement of 9-point stencil for the 2-D model and 27-point stencil for the 3-D model. This is apparently challenging and cumbersome when making the global system of equations. In this work, we apply the equation-type approach, which is the experimenting pressure field approach that enables the solution of the global problem breaks into the solution of multitude of local problems that significantly reduce the complexity without affecting the accuracy of numerical solution. This approach also leads in reducing the computational cost during the simulation. We have applied this technique to a variety of anisotropy scenarios of 3-D subsurface flow problems and the numerical results demonstrate that the experimenting pressure field technique fits very well with the multipoint flux approximation

  7. Adaptive mesh refinement for a finite volume method for flow and transport of radionuclides in heterogeneous porous media

    International Nuclear Information System (INIS)

    Amaziane, Brahim; Bourgeois, Marc; El Fatini, Mohamed

    2014-01-01

    In this paper, we consider adaptive numerical simulation of miscible displacement problems in porous media, which are modeled by single phase flow equations. A vertex-centred finite volume method is employed to discretize the coupled system: the Darcy flow equation and the diffusion-convection concentration equation. The convection term is approximated with a Godunov scheme over the dual finite volume mesh, whereas the diffusion-dispersion term is discretized by piecewise linear conforming finite elements. We introduce two kinds of indicators, both of them of residual type. The first one is related to time discretization and is local with respect to the time discretization: thus, at each time, it provides an appropriate information for the choice of the next time step. The second is related to space discretization and is local with respect to both the time and space variable and the idea is that at each time it is an efficient tool for mesh adaptivity. An error estimation procedure evaluates where additional refinement is needed and grid generation procedures dynamically create or remove fine-grid patches as resolution requirements change. The method was implemented in the software MELODIE, developed by the French Institute for Radiological Protection and Nuclear Safety (IRSN, Institut de Radioprotection et de Surete Nucleaire). The algorithm is then used to simulate the evolution of radionuclide migration from the waste packages through a heterogeneous disposal, demonstrating its capability to capture complex behavior of the resulting flow. (authors)

  8. Finite volume method for radiative heat transfer in an unstructured flow solver for emitting, absorbing and scattering media

    International Nuclear Information System (INIS)

    Gazdallah, Moncef; Feldheim, Véronique; Claramunt, Kilian; Hirsch, Charles

    2012-01-01

    This paper presents the implementation of the finite volume method to solve the radiative transfer equation in a commercial code. The particularity of this work is that the method applied on unstructured hexahedral meshes does not need a pre-processing step establishing a particular marching order to visit all the control volumes. The solver simply visits the faces of the control volumes as numbered in the hexahedral unstructured mesh. A cell centred mesh and a spatial differencing step scheme to relate facial radiative intensities to nodal intensities is used. The developed computer code based on FVM has been integrated in the CFD solver FINE/Open from NUMECA Int. Radiative heat transfer can be evaluated within systems containing uniform, grey, emitting, absorbing and/or isotropically or linear anisotropically scattering medium bounded by diffuse grey walls. This code has been validated for three test cases. The first one is a three dimensional rectangular enclosure filled with emitting, absorbing and anisotropically scattering media. The second is the differentially heated cubic cavity. The third one is the L-shaped enclosure. For these three test cases a good agreement has been observed when temperature and heat fluxes predictions are compared with references taken, from literature.

  9. Krylov iterative methods and synthetic acceleration for transport in binary statistical media

    International Nuclear Information System (INIS)

    Fichtl, Erin D.; Warsa, James S.; Prinja, Anil K.

    2009-01-01

    In particle transport applications there are numerous physical constructs in which heterogeneities are randomly distributed. The quantity of interest in these problems is the ensemble average of the flux, or the average of the flux over all possible material 'realizations.' The Levermore-Pomraning closure assumes Markovian mixing statistics and allows a closed, coupled system of equations to be written for the ensemble averages of the flux in each material. Generally, binary statistical mixtures are considered in which there are two (homogeneous) materials and corresponding coupled equations. The solution process is iterative, but convergence may be slow as either or both materials approach the diffusion and/or atomic mix limits. A three-part acceleration scheme is devised to expedite convergence, particularly in the atomic mix-diffusion limit where computation is extremely slow. The iteration is first divided into a series of 'inner' material and source iterations to attenuate the diffusion and atomic mix error modes separately. Secondly, atomic mix synthetic acceleration is applied to the inner material iteration and S 2 synthetic acceleration to the inner source iterations to offset the cost of doing several inner iterations per outer iteration. Finally, a Krylov iterative solver is wrapped around each iteration, inner and outer, to further expedite convergence. A spectral analysis is conducted and iteration counts and computing cost for the new two-step scheme are compared against those for a simple one-step iteration, to which a Krylov iterative method can also be applied.

  10. New methods and media for the centrifugation of honey bee (Hymenoptera: Apidae) drone semen.

    Science.gov (United States)

    Wegener, Jakob; May, Tanja; Kamp, Günter; Bienefeld, Kaspar

    2014-02-01

    Centrifugation of Apis mellifera L. drone semen is a necessary step in the homogenization of semen pools for the enlargement of the effective breeding population, as well as in the collection of semen by the so-called washing technique. It is also of interest for the removal of cryoprotectants after cryopreservation. The adoption of methods involving semen centrifugation has been hampered by their damaging effect to sperm. Here, we tested four new diluents as well as three additives (catalase, hen egg yolk, and a protease inhibitor), using sperm motility and dual fluorescent staining as indicators of semen quality. Three of the new diluents significantly reduced motility losses after centrifugation, as compared with the literature standard. Values of motility and propidium iodide negativity obtained with two of these diluents were not different from those measured with untreated semen. The least damaging diluent, a citrate-HEPES buffer containing trehalose, was then tested in an insemination experiment with centrifuged semen. Most queens receiving this semen produced normal brood, and the number of sperm reaching the storage organ of the queen was not significantly different from that in queens receiving untreated semen. These results could improve the acceptance of techniques involving the centrifugation of drone semen. The diluent used in the insemination experiment could also serve as semen extender for applications not involving centrifugation.

  11. Synthesis of assembled ZnO structures by precipitation method in aqueous media

    International Nuclear Information System (INIS)

    Sepulveda-Guzman, S.; Reeja-Jayan, B.; Rosa, E. de la; Torres-Castro, A.; Gonzalez-Gonzalez, V.; Jose-Yacaman, M.

    2009-01-01

    In this work, arrays of submicron ZnO structures were successfully synthesized using a one-step aqueous precipitation method. Snowflake-like and flower-like morphologies were obtained by changing the reaction temperature. X-ray diffraction (XRD) patterns indicated that the ZnO arrays have a wurtzite crystal structure. A possible growth mechanism based on the analysis done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and high-angle annular dark field (HAADF) is proposed. Our findings suggest that the growth mechanism of the ZnO arrays is by self-aggregation, and that such an oriented aggregation is enhanced by increasing the reaction temperature. The results also revealed that the aggregation process introduces several structural defects such as differences in mass distribution and crystalline structure. In order to study the surface chemical composition the samples were also characterized by XPS. The results showed the presence of Zn(OH) 2 and absorbed carbon species on the ZnO surface. In addition, the photoluminescence characterization showed that on UV excitation (λ = 360 nm) all samples present the characteristic UV emission centered at 390 nm, and for the sample synthesized at 60 deg. C, a visible emission was also observed

  12. Synthesis of assembled ZnO structures by precipitation method in aqueous media

    Energy Technology Data Exchange (ETDEWEB)

    Sepulveda-Guzman, S. [Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, UANL Km. 10 de la nueva carretera al Aeropuerto Internacional de Monterrey, PIIT Monterrey, Apodaca NL (Mexico); Facultad de Ingenieria Mecanica y Electrica de la UANL, Ciudad Universitaria San Nicolas de los Garza, Nuevo Leon C.P. 66451 (Mexico)], E-mail: ssepulveda@mail.uanl.mx; Reeja-Jayan, B. [Texas Materials Institute, University of Texas at Austin, 1 University Station C0803 (United States); Rosa, E. de la [Centro de Investigaciones en Optica, A.C. Loma del Bosque 115 Col. Lomas del Campestre, Leon Gto. C.P. 37150 (Mexico); Torres-Castro, A.; Gonzalez-Gonzalez, V. [Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, UANL Km. 10 de la nueva carretera al Aeropuerto Internacional de Monterrey, PIIT Monterrey, Apodaca NL (Mexico); Facultad de Ingenieria Mecanica y Electrica de la UANL, Ciudad Universitaria San Nicolas de los Garza, Nuevo Leon C.P. 66451 (Mexico); Jose-Yacaman, M. [Physics and Astronomy Department, University of Texas at San Antonio, 1604 Campus San Antonio, TX 78249 (United States)

    2009-05-15

    In this work, arrays of submicron ZnO structures were successfully synthesized using a one-step aqueous precipitation method. Snowflake-like and flower-like morphologies were obtained by changing the reaction temperature. X-ray diffraction (XRD) patterns indicated that the ZnO arrays have a wurtzite crystal structure. A possible growth mechanism based on the analysis done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and high-angle annular dark field (HAADF) is proposed. Our findings suggest that the growth mechanism of the ZnO arrays is by self-aggregation, and that such an oriented aggregation is enhanced by increasing the reaction temperature. The results also revealed that the aggregation process introduces several structural defects such as differences in mass distribution and crystalline structure. In order to study the surface chemical composition the samples were also characterized by XPS. The results showed the presence of Zn(OH){sub 2} and absorbed carbon species on the ZnO surface. In addition, the photoluminescence characterization showed that on UV excitation ({lambda} = 360 nm) all samples present the characteristic UV emission centered at 390 nm, and for the sample synthesized at 60 deg. C, a visible emission was also observed.

  13. Grassroots Heritage: A Multi-Method Investigation of How Social Media Sustain the Living Heritage of Historic Crises

    Science.gov (United States)

    Liu, Sophia B.

    2011-01-01

    Unprecedented uses of information and communication technology (ICT) and particularly social media (e.g., Wikipedia, Facebook, and Twitter) are occurring in times of crisis. This dissertation investigates the socio-technical practices emerging from the use of social media and how these practices help to "sustain the living heritage" of…

  14. Time reversal optical tomography and decomposition methods for detection and localization of targets in highly scattering turbid media

    Science.gov (United States)

    Wu, Binlin

    New near-infrared (NIR) diffuse optical tomography (DOT) approaches were developed to detect, locate, and image small targets embedded in highly scattering turbid media. The first approach, referred to as time reversal optical tomography (TROT), is based on time reversal (TR) imaging and multiple signal classification (MUSIC). The second approach uses decomposition methods of non-negative matrix factorization (NMF) and principal component analysis (PCA) commonly used in blind source separation (BSS) problems, and compare the outcomes with that of optical imaging using independent component analysis (OPTICA). The goal is to develop a safe, affordable, noninvasive imaging modality for detection and characterization of breast tumors in early growth stages when those are more amenable to treatment. The efficacy of the approaches was tested using simulated data, and experiments involving model media and absorptive, scattering, and fluorescent targets, as well as, "realistic human breast model" composed of ex vivo breast tissues with embedded tumors. The experimental arrangements realized continuous wave (CW) multi-source probing of samples and multi-detector acquisition of diffusely transmitted signal in rectangular slab geometry. A data matrix was generated using the perturbation in the transmitted light intensity distribution due to the presence of absorptive or scattering targets. For fluorescent targets the data matrix was generated using the diffusely transmitted fluorescence signal distribution from the targets. The data matrix was analyzed using different approaches to detect and characterize the targets. The salient features of the approaches include ability to: (a) detect small targets; (b) provide three-dimensional location of the targets with high accuracy (~within a millimeter or 2); and (c) assess optical strength of the targets. The approaches are less computation intensive and consequently are faster than other inverse image reconstruction methods that

  15. COMPARISON OF IMMUNOASSAY AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY METHODS FOR MEASURING 3,5,6-TRICHLORO-2PYRIDINOL IN MULTIPLE SAMPLE MEDIA

    Science.gov (United States)

    Two enzyme-linked immunosorbent assay (ELISA) methods were evaluated for the determination of 3,5,6-trichloro-2-pyridinol (3,5,6-TCP) in multiple sample media (dust, soil, food, and urine). The dust and soil samples were analyzed by a commercial RaPID immunoassay testing kit. ...

  16. In vivo in vitro correlations for a poorly soluble drug, danazol, using the flow-through dissolution method with biorelevant dissolution media

    DEFF Research Database (Denmark)

    Sunesen, Vibeke Hougaard; Pedersen, Betty Lomstein; Kristensen, Henning Gjelstrup

    2005-01-01

    The purpose of the study was to design dissolution tests that were able to distinguish between the behaviour of danazol under fasted and fed conditions, by using biorelevant media. In vitro dissolution of 100mg danazol capsules was performed using the flow-through dissolution method. Flow rates w...

  17. A new method for dosing uranium in biological media; Nouvelle methode de dosage de l'uranium dans les milieux biologiques

    Energy Technology Data Exchange (ETDEWEB)

    Henry, Ph; Kobisch, Ch [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report describes a new method for dosing uranium in biological media based on measurement of alpha activity. After treatment of the sample with a mineral acid, the uranium is reduced to the valency four by trivalent titanium and is precipitated as phosphate in acid solution. The uranium is then separated from the titanium by precipitation as UF{sub 4} with lanthanum as carrier. A slight modification, unnecessary in the case of routine analyses, makes it possible to eliminate other possible alpha emitters (thorium and transuranic elements). (authors) [French] Ce rapport decrit une nouvelle methode de dosage de l'uranium dans les milieux biologiques par mesure de l'activite alpha. Apres mineralisation de l'echantillon, l'uranium est reduit a la valence IV par le titane trivalent et precipite en milieu acide sous forme de phosphate. L'uranium est ensuite separe du titane par precipitation a l'etat d'UF{sub 4} avec du lanthane entraineur. Une legere modification, inutile dans le cas d'analyses de routine, permet d'effectuer l'elimination d'autres emetteurs alpha eventuels (thorium et transuraniens). (auteurs)

  18. Actinide-Lanthanide separation by an electrolytic method in molten salt media: feasibility assessment of a renewed liquid cathode

    International Nuclear Information System (INIS)

    Huguet, A.

    2009-12-01

    This study is part of a research program concerning the assessment of pyrochemical methods for the nuclear waste processing. The An-Ln partitioning could be achieved by an electrolytic selective extraction in molten salt media. It has been decided to focus on liquid reactive cathode which better suits to a group actinides co-recycling. The aim of the study is to propose, define and initiate the development of an electrolytic pyro-process dedicated to the quantitative and selective recovery of the actinides. Quantitativeness is related to technology, whereas selectivity is governed by chemistry. The first step consisted in selecting the adequate operating conditions, which enables a sufficient An-Ln separation. The first step consisted, by means of thermodynamic calculi and electrochemical investigations, in selecting a promising combination between molten electrolyte and cathodic material, regarding the process constraints. To improve the recovery yield, it is necessary to develop a disruptive technology: here comes the concept of a dynamic electrodeposition carried out onto liquid metallic drops. The next step consisted in designing and manufacturing a lab-scale device which enables dropping flow studies. Since interfacial phenomena are of primary meaning in such a concept, it has been decided to focus on high temperature liquid-liquid interfacial measurements. (author)

  19. Domain decomposition methods for flows in faulted porous media; Methodes de decomposition de domaine pour les ecoulements en milieux poreux failles

    Energy Technology Data Exchange (ETDEWEB)

    Flauraud, E.

    2004-05-01

    In this thesis, we are interested in using domain decomposition methods for solving fluid flows in faulted porous media. This study comes within the framework of sedimentary basin modeling which its aim is to predict the presence of possible oil fields in the subsoil. A sedimentary basin is regarded as a heterogeneous porous medium in which fluid flows (water, oil, gas) occur. It is often subdivided into several blocks separated by faults. These faults create discontinuities that have a tremendous effect on the fluid flow in the basin. In this work, we present two approaches to model faults from the mathematical point of view. The first approach consists in considering faults as sub-domains, in the same way as blocks but with their own geological properties. However, because of the very small width of the faults in comparison with the size of the basin, the second and new approach consists in considering faults no longer as sub-domains, but as interfaces between the blocks. A mathematical study of the two models is carried out in order to investigate the existence and the uniqueness of solutions. Then; we are interested in using domain decomposition methods for solving the previous models. The main part of this study is devoted to the design of Robin interface conditions and to the formulation of the interface problem. The Schwarz algorithm can be seen as a Jacobi method for solving the interface problem. In order to speed up the convergence, this problem can be solved by a Krylov type algorithm (BICGSTAB). We discretize the equations with a finite volume scheme, and perform extensive numerical tests to compare the different methods. (author)

  20. Injection of colloidal size particles of Fe0 in porous media with shearthinning fluids as a method to emplace a permeable reactive zone

    International Nuclear Information System (INIS)

    Cantrell, K.J.; Kaplan, D.I.; Gilmore, T.J.

    1997-01-01

    Previous work has demonstrated the feasibility of injecting suspensions of micron-size zero-valent (FeO) particles into porous media as a method to emplace a permeable reactive zone. Further studies were conducted to evaluate the effects of several shearthinning fluids on enhancing the injectability of micron-size FeO particles into porous media. In contrast to Newtonian fluids, whose viscosities are constant with shear rate, certain non-Newtonian fluids are shearthinning, that is, the viscosity of these fluids decreases with increasing shear rate. The primary benefit of using these fluids for this application is that they increase the viscosity of the aqueous phase without adversely decreasing the hydraulic conductivity. A suspension formulated with a shearthinning fluid will maintain a relatively high viscosity in solution near the FeO particles (where the shear stress is low) relative to locations near the surfaces of the porous media, where the shear stress is high. The increased viscosity decreases the rate of gravitational settling of the dense FeO colloids (7.6 9/cm3) while maintaining a relatively high hydraulic conductivity that permits pumping the colloid suspensions into porous media at greater flowrates and distances. Aqueous solutions of three polymers at different concentrations were investigated. It was determined that, the use of shear thinning fluids greatly increases the injectability of the colloidal FeO suspensions in porous media

  1. Transport methods: general. 2. Monte Carlo Particle Transport in Media with Exponentially Varying Time-Dependent Cross Sections

    International Nuclear Information System (INIS)

    Brown, Forrest B.; Martin, William R.

    2001-01-01

    We have investigated Monte Carlo schemes for analyzing particle transport through media with exponentially varying time-dependent cross sections. For such media, the cross sections are represented in the form Σ(t) = Σ 0 e -at (1) or equivalently as Σ(x) = Σ 0 e -bx (2) where b = av and v is the particle speed. For the following discussion, the parameters a and b may be either positive, for exponentially decreasing cross sections, or negative, for exponentially increasing cross sections. For most time-dependent Monte Carlo applications, the time and spatial variations of the cross-section data are handled by means of a stepwise procedure, holding the cross sections constant for each region over a small time interval Δt, performing the Monte Carlo random walk over the interval Δt, updating the cross sections, and then repeating for a series of time intervals. Continuously varying spatial- or time-dependent cross sections can be treated in a rigorous Monte Carlo fashion using delta-tracking, but inefficiencies may arise if the range of cross-section variation is large. In this paper, we present a new method for sampling collision distances directly for cross sections that vary exponentially in space or time. The method is exact and efficient and has direct application to Monte Carlo radiation transport methods. To verify that the probability density function (PDF) is correct and that the random-sampling procedure yields correct results, numerical experiments were performed using a one-dimensional Monte Carlo code. The physical problem consisted of a beam source impinging on a purely absorbing infinite slab, with a slab thickness of 1 cm and Σ 0 = 1 cm -1 . Monte Carlo calculations with 10 000 particles were run for a range of the exponential parameter b from -5 to +20 cm -1 . Two separate Monte Carlo calculations were run for each choice of b, a continuously varying case using the random-sampling procedures described earlier, and a 'conventional' case where the

  2. Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    KAUST Repository

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin R.

    2015-01-01

    , anisotropic media, where we construct basis functions from multiple local problems for both boundaries and the interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property

  3. A KDE-Based Random Walk Method for Modeling Reactive Transport With Complex Kinetics in Porous Media

    Science.gov (United States)

    Sole-Mari, Guillem; Fernà ndez-Garcia, Daniel; Rodríguez-Escales, Paula; Sanchez-Vila, Xavier

    2017-11-01

    In recent years, a large body of the literature has been devoted to study reactive transport of solutes in porous media based on pure Lagrangian formulations. Such approaches have also been extended to accommodate second-order bimolecular reactions, in which the reaction rate is proportional to the concentrations of the reactants. Rather, in some cases, chemical reactions involving two reactants follow more complicated rate laws. Some examples are (1) reaction rate laws written in terms of powers of concentrations, (2) redox reactions incorporating a limiting term (e.g., Michaelis-Menten), or (3) any reaction where the activity coefficients vary with the concentration of the reactants, just to name a few. We provide a methodology to account for complex kinetic bimolecular reactions in a fully Lagrangian framework where each particle represents a fraction of the total mass of a specific solute. The method, built as an extension to the second-order case, is based on the concept of optimal Kernel Density Estimator, which allows the concentrations to be written in terms of particle locations, hence transferring the concept of reaction rate to that of particle location distribution. By doing so, we can update the probability of particles reacting without the need to fully reconstruct the concentration maps. The performance and convergence of the method is tested for several illustrative examples that simulate the Advection-Dispersion-Reaction Equation in a 1-D homogeneous column. Finally, a 2-D application example is presented evaluating the need of fully describing non-bilinear chemical kinetics in a randomly heterogeneous porous medium.

  4. Accurate and efficient radiation transport in optically thick media -- by means of the Symbolic Implicit Monte Carlo method in the difference formulation

    International Nuclear Information System (INIS)

    Szoke, A; Brooks, E D; McKinley, M; Daffin, F

    2005-01-01

    The equations of radiation transport for thermal photons are notoriously difficult to solve in thick media without resorting to asymptotic approximations such as the diffusion limit. One source of this difficulty is that in thick, absorbing media thermal emission is almost completely balanced by strong absorption. In a previous publication [SB03], the photon transport equation was written in terms of the deviation of the specific intensity from the local equilibrium field. We called the new form of the equations the difference formulation. The difference formulation is rigorously equivalent to the original transport equation. It is particularly advantageous in thick media, where the radiation field approaches local equilibrium and the deviations from the Planck distribution are small. The difference formulation for photon transport also clarifies the diffusion limit. In this paper, the transport equation is solved by the Symbolic Implicit Monte Carlo (SIMC) method and a comparison is made between the standard formulation and the difference formulation. The SIMC method is easily adapted to the derivative source terms of the difference formulation, and a remarkable reduction in noise is obtained when the difference formulation is applied to problems involving thick media

  5. System and Method for Providing a Climate Data Persistence Service

    Science.gov (United States)

    Schnase, John L. (Inventor); Ripley, III, William David (Inventor); Duffy, Daniel Q. (Inventor); Thompson, John H. (Inventor); Strong, Savannah L. (Inventor); McInerney, Mark (Inventor); Sinno, Scott (Inventor); Tamkin, Glenn S. (Inventor); Nadeau, Denis (Inventor)

    2018-01-01

    A system, method and computer-readable storage devices for providing a climate data persistence service. A system configured to provide the service can include a climate data server that performs data and metadata storage and management functions for climate data objects, a compute-storage platform that provides the resources needed to support a climate data server, provisioning software that allows climate data server instances to be deployed as virtual climate data servers in a cloud computing environment, and a service interface, wherein persistence service capabilities are invoked by software applications running on a client device. The climate data objects can be in various formats, such as International Organization for Standards (ISO) Open Archival Information System (OAIS) Reference Model Submission Information Packages, Archive Information Packages, and Dissemination Information Packages. The climate data server can enable scalable, federated storage, management, discovery, and access, and can be tailored for particular use cases.

  6. Neutron thermalization in absorbing infinite homogeneous media: theoretical methods; Methodes theoriques pour l'etude de la thermalisation des neutrons dans les milieux absorbants infinis et homogenes

    Energy Technology Data Exchange (ETDEWEB)

    Cadilhac, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-11-15

    After a general survey of the theory of neutron thermalization in homogeneous media, one introduces, through a proper formulation, a simplified model generalizing both the Horowitz model (generalized heavy free gas approximation) and the proton gas model. When this model is used, the calculation of spectra is reduced to the solution of linear second order differential equations. Since it depends on two arbitrary functions, the model gives a good approximation of any usual moderator for reactor physics purposes. The choice of these functions is discussed from a theoretical point of view; a method based on the consideration of the first two moments of the scattering law is investigated. Finally, the possibility of discriminating models by using experimental informations is considered. (author) [French] Apres un passage en revue de generalites sur la thermalisation des neutrons dans les milieux homogenes, on developpe un formalisme permettant de definir et d'etudier un modele simplifie de thermaliseur. Ce modele generalise l'approximation proposee par J. HOROWITZ (''gaz lourd generalise'') et comporte comme cas particulier le modele ''hydrogene gazeux monoatomique''. Il ramene le calcul des spectres a la resolution d'equations differentielles lineaires du second ordre. Il fait intervenir deux fonctions arbitraires, ce qui lui permet de representer les thermaliseurs usuels de facon satisfaisante pour les besoins de la physique des reacteurs. L'ajustement theorique de ces fonctions est discute; on etudie une methode basee sur la consideration des deux premiers moments de la loi de diffusion. On envisage enfin la possibilite de discriminer les modeles d'apres des renseignements d'origine experimentale. (auteur)

  7. Media education.

    Science.gov (United States)

    Strasburger, Victor C

    2010-11-01

    The American Academy of Pediatrics recognizes that exposure to mass media (eg, television, movies, video and computer games, the Internet, music lyrics and videos, newspapers, magazines, books, advertising) presents health risks for children and adolescents but can provide benefits as well. Media education has the potential to reduce the harmful effects of media and accentuate the positive effects. By understanding and supporting media education, pediatricians can play an important role in reducing harmful effects of media on children and adolescents.

  8. The Effectiveness Of Social Media (Facebook) Compared With More Traditional Advertising Methods for Recruiting Eligible Participants To Health Research Studies: A Randomized, Controlled Clinical Trial

    Science.gov (United States)

    Thow, Megan; Ferguson, Stuart G

    2016-01-01

    Background Recruiting participants for research studies can be difficult and costly. The popularity of social media platforms (eg, Facebook) has seen corresponding growth in the number of researchers turning to social networking sites and their embedded advertising frameworks to locate eligible participants for studies. Compared with traditional recruitment strategies such as print media, social media advertising has been shown to be favorable in terms of its reach (especially with hard-to-reach populations), cost effectiveness, and usability. However, to date, no studies have examined how participants recruited via social media progress through a study compared with those recruited using more traditional recruitment strategies. Objectives (1) Examine whether visiting the study website prior to being contacted by researchers creates self-screened participants who are more likely to progress through all study phases (eligible, enrolled, completed); (2) compare conversion percentages and cost effectiveness of each recruitment method at each study phase; and, (3) compare demographic and smoking characteristics of participants recruited through each strategy to determine if they attract similar samples. Methods Participants recruited to a smoking cessation clinical trial were grouped by how they had become aware of the study: via social media (Facebook) or traditional media (eg, newspaper, flyers, radio, word of mouth). Groups were compared based on throughput data (conversion percentages and cost) as well as demographic and smoking characteristics. Results Visiting the study website did not result in individuals who were more likely to be eligible for (P=.24), enroll in (P=.20), or complete (P=.25) the study. While using social media was more cost effective than traditional methods when we examined earlier endpoints of the recruitment process (cost to obtain a screened respondent: AUD $22.73 vs $29.35; cost to obtain an eligible respondent: $37.56 vs $44.77), it was

  9. The Effectiveness Of Social Media (Facebook) Compared With More Traditional Advertising Methods for Recruiting Eligible Participants To Health Research Studies: A Randomized, Controlled Clinical Trial.

    Science.gov (United States)

    Frandsen, Mai; Thow, Megan; Ferguson, Stuart G

    2016-08-10

    Recruiting participants for research studies can be difficult and costly. The popularity of social media platforms (eg, Facebook) has seen corresponding growth in the number of researchers turning to social networking sites and their embedded advertising frameworks to locate eligible participants for studies. Compared with traditional recruitment strategies such as print media, social media advertising has been shown to be favorable in terms of its reach (especially with hard-to-reach populations), cost effectiveness, and usability. However, to date, no studies have examined how participants recruited via social media progress through a study compared with those recruited using more traditional recruitment strategies. (1) Examine whether visiting the study website prior to being contacted by researchers creates self-screened participants who are more likely to progress through all study phases (eligible, enrolled, completed); (2) compare conversion percentages and cost effectiveness of each recruitment method at each study phase; and, (3) compare demographic and smoking characteristics of participants recruited through each strategy to determine if they attract similar samples. Participants recruited to a smoking cessation clinical trial were grouped by how they had become aware of the study: via social media (Facebook) or traditional media (eg, newspaper, flyers, radio, word of mouth). Groups were compared based on throughput data (conversion percentages and cost) as well as demographic and smoking characteristics. Visiting the study website did not result in individuals who were more likely to be eligible for (P=.24), enroll in (P=.20), or complete (P=.25) the study. While using social media was more cost effective than traditional methods when we examined earlier endpoints of the recruitment process (cost to obtain a screened respondent: AUD $22.73 vs $29.35; cost to obtain an eligible respondent: $37.56 vs $44.77), it was less cost effective in later endpoints

  10. Media Educational Practices in Teacher Training

    Science.gov (United States)

    Fedorov, Alexander

    2010-01-01

    This article described the methods of media education development of personality (including the audience's individual, "creative critical thinking" corresponding to "conceptual" (knowledge of media culture theory), "sensory" (intentional communication with mass media, orientational experience in genre and topical…

  11. Antennas in inhomogeneous media

    CERN Document Server

    Galejs, Janis; Fock, V A; Wait, J R

    2013-01-01

    Antennas in Inhomogeneous Media details the methods of analyzing antennas in such inhomogeneous media. The title covers the complex geometrical configurations along with its variational formulations. The coverage of the text includes various conditions the antennas are subjected to, such as antennas in the interface between two media; antennas in compressible isotropic plasma; and linear antennas in a magnetoionic medium. The selection also covers insulated loops in lossy media; slot antennas with a stratified dielectric or isotropic plasma layers; and cavity-backed slot antennas. The book wil

  12. Mapping Media and Meaning

    DEFF Research Database (Denmark)

    Chamberlain, Alan; Bødker, Mads; Papangelis, Konstantinos

    2017-01-01

    places and intangible personal content can be used to develop meaningful experiences. The paper explores the use of autoethnography as a method for soundscape design in the fields of personal heritage and locative media. Specifically, we explore possible connections between digital media, space...

  13. Media Komunitas dan Media Literacy

    Directory of Open Access Journals (Sweden)

    Pawito .

    2013-12-01

    Full Text Available Abstract:This essay deals with community media in relation to media literacy. After a short discussion on a number of community media characters is made the essay goes further with somewhat detail theoretical presumptions of the roles of media community with respect primarily to the development as Amartya Sen mentioned about. The author suggests that community media may play some significant roles in the development including (a disseminating information (from varieties of perspective, (b facilitating public discussion, (c helping to reach solutions of problems, (d encouraging participations, and (e encouraging the development of media literacy. Regarding the last point the author remarks that media community may have a dual-roles i.e facilitating community’s member in media participation and facilitating community’s member in media education.

  14. Experimental methods for quenching structures in lunar-analog silicate melts - Variations as a function of quench media and composition

    International Nuclear Information System (INIS)

    Dyar, M.D.

    1984-01-01

    Compositions analogous to lunar green, orange, and brown glasses were synthesized under consistent conditions, then quenched into a variety of different media when the samples were removed from the furnace. Iron valence and coordination are a direct function of quench media used, spanning the range from brine/ice (most effective quench), water, butyl phthalate, silicone oil, liquid nitrogen, highly reducing CO-CO2 gas, to air (least efficient quench). In the green and brown glasses, Fe(3+) in four-fold and six-fold coordination is observed in the slowest-quenched samples Fe(2+) coordination varies directly with quench efficiency. Less pronounced changes were observed in the Ti-rich orange glass. Therefore the remote-sensed spectrum of a glass-bearing regolith on the moon may be influenced by the process by which the glass cooled, and extreme caution must be used when comparing spectra of synthetic glass analogs with real lunar glasses

  15. Locative media

    CERN Document Server

    Wilken, Rowan

    2014-01-01

    Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

  16. Media Framing

    DEFF Research Database (Denmark)

    Pedersen, Rasmus T.

    2017-01-01

    The concept of media framing refers to the way in which the news media organize and provide meaning to a news story by emphasizing some parts of reality and disregarding other parts. These patterns of emphasis and exclusion in news coverage create frames that can have considerable effects on news...... consumers’ perceptions and attitudes regarding the given issue or event. This entry briefly elaborates on the concept of media framing, presents key types of media frames, and introduces the research on media framing effects....

  17. A sensitive multi-residue method for the determination of 35 micropollutants including pharmaceuticals, iodinated contrast media and pesticides in water.

    Science.gov (United States)

    Valls-Cantenys, Carme; Scheurer, Marco; Iglesias, Mònica; Sacher, Frank; Brauch, Heinz-Jürgen; Salvadó, Victoria

    2016-09-01

    A sensitive, multi-residue method using solid-phase extraction followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to determine a representative group of 35 analytes, including corrosion inhibitors, pesticides and pharmaceuticals such as analgesic and anti-inflammatory drugs, five iodinated contrast media, β-blockers and some of their metabolites and transformation products in water samples. Few other methods are capable of determining such a broad range of contrast media together with other analytes. We studied the parameters affecting the extraction of the target analytes, including sorbent selection and extraction conditions, their chromatographic separation (mobile phase composition and column) and detection conditions using two ionisation sources: electrospray ionisation (ESI) and atmospheric pressure chemical ionisation (APCI). In order to correct matrix effects, a total of 20 surrogate/internal standards were used. ESI was found to have better sensitivity than APCI. Recoveries ranging from 79 to 134 % for tap water and 66 to 144 % for surface water were obtained. Intra-day precision, calculated as relative standard deviation, was below 34 % for tap water and below 21 % for surface water, groundwater and effluent wastewater. Method quantification limits (MQL) were in the low ng L(-1) range, except for the contrast agents iomeprol, amidotrizoic acid and iohexol (22, 25.5 and 17.9 ng L(-1), respectively). Finally, the method was applied to the analysis of 56 real water samples as part of the validation procedure. All of the compounds were detected in at least some of the water samples analysed. Graphical Abstract Multi-residue method for the determination of micropollutants including pharmaceuticals, iodinated contrast media and pesticides in waters by LC-MS/MS.

  18. Do the Media Undermine Democracy?

    Science.gov (United States)

    Dorman, William A.

    This paper considers political reasoning within a democracy and how mass media may affect that process, as well as how the perspective and method of critical thinking may be brought to bear on the subject of media and politics. Specifically, the paper (1) discusses some ways in which the mass media may affect political reasoning; (2) offers a…

  19. Sensitive Media

    Directory of Open Access Journals (Sweden)

    Malinowska Anna

    2017-12-01

    Full Text Available The paper engages with what we refer to as “sensitive media,” a concept associated with developments in the overall media environment, our relationships with media devices, and the quality of the media themselves. Those developments point to the increasing emotionality of the media world and its infrastructures. Mapping the trajectories of technological development and impact that the newer media exert on human condition, our analysis touches upon various forms of emergent affect, emotion, and feeling in order to trace the histories and motivations of the sensitization of “the media things” as well as the redefinition of our affective and emotional experiences through technologies that themselves “feel.”

  20. Media Ecology

    Directory of Open Access Journals (Sweden)

    Marina Ašković

    2015-05-01

    Full Text Available Does the trend in which electronic media are gradually becoming extension of human body have to move towards full enslavement of a human and his personality, or the same human will unpredictably, with the aid of his personal media literacy, exit the whirls of media and technological censorships? Personality crisis is closely related to the crisis of language no matter how contradicted to global ideology of transnational transhumanism it may seem. Considering the fact that recent media presentations of the world are based on commercialization of environmentalism, philosophical and aesthetic thought appears as an important subject of ecology. As media mediates, the scenery of civilized living increasingly becomes more appealing even though it derives from commercial and political background. Consequently, the future of humanity depends by large on the philosophy of media. Media have to truly ecologise returning the humanum to its essence making it into the extension of the natural world.

  1. Using a mixed-methods approach to measure impact of a school-based nutrition and media education intervention study on fruit and vegetable intake of Italian children.

    Science.gov (United States)

    Grassi, Elena; Evans, Alexandra; Ranjit, Nalini; Pria, Simona Dalla; Messina, Laura

    2016-08-01

    The purpose of the present study was to investigate the impact of a school-based nutrition and media education intervention on the promotion of fruit and vegetable consumption to help prevent childhood obesity. The 10-week-long intervention included sessions on nutrition education and media literacy. It also included a health communication media-based campaign workshop during which the children created posters, newsletters and video commercials related to fruits and vegetables targeted to their parents. For evaluation purposes, the study utilized a mixed-methods approach, including a quasi-experimental study (with one intervention group and one control group) and a focus group study. Four different elementary schools in Treviso (Veneto Region of Italy) agreed to participate in the research. The target population for the study included 10-year-old Italian children and their parents. Data indicate that this intervention was effective for children but not for parents. Evaluation results show that the intervention was effective in significantly increasing children's fruit and vegetable intake (Pmedia education intervention to address the children's obesity issue and, in particular, to increase children's fruit and vegetable intake. The study also opens a new perspective on the theoretical constructs investigated, because the development of 'ability of expression' could be considered one of the most important factors to determine the efficacy of the intervention.

  2. Making Media Studies

    Directory of Open Access Journals (Sweden)

    David Gauntlett

    2015-12-01

    Full Text Available This podcast is a recording of a research seminar that took place on December 3, 2015, at the University of Westminster's Communication and Media Research Institute (CAMRI. In this contribution, David Gauntlett discusses his new book, Making Media Studies, and other new work. In Making Media Studies (Peter Lang, 2015, Gauntlett proposes a vision of media studies based around doing and making – not about the acquisition of skills, as such, but an experience of building knowledge and understanding through creative hands-on engagement with all kinds of media. Gauntlett suggests that media studies scholars have failed to recognise the significance of everyday creativity – the vital drive of people to make, exchange, and learn together, supported by online networks. He argues that we should think about media in terms of conversations, inspirations, and making things happen. Media studies can be about genuine social change, he suggests, if we recognise the significance of everyday creativity, work to transform our tools, and learn to use them wisely. David Gauntlett is a Professor in the School of Media, Arts and Design at the University of Westminster, where he is also the School's Co-Director of Research. He is the author of several books, including: Creative Explorations (2007, Media, Gender and Identity: An Introduction (2nd edition 2008, Making is Connecting (2011, and Making Media Studies (2015. He has made a number of popular online resources, videos and playthings, and has pioneered creative research and workshop methods. He is external examiner for Information Experience Design at the Royal College of Art, London.

  3. The MEDIA model: An innovative method for digitizing and training community members to facilitate an HIV prevention intervention.

    Science.gov (United States)

    Renfro, Tiffaney; Johnson, Erin; Lambert, Danielle N; Wingood, Gina; DiClemente, Ralph J

    2018-02-17

    As human immunodeficiency virus (HIV) continues to disproportionately affect African American women, practitioners remain committed to developing innovative strategies to reduce HIV prevalence. These strategies include training community organizations, such as churches, and utilizing digital media to make intervention dissemination more sustainable. This article describes one such effort to train lay community members within predominantly Black churches in Atlanta, GA, to implement an HIV prevention intervention. Lay educators were trained by translating a face-to-face Training of Facilitators (TOF) to a digital platform using the MEDIA (Motivate-Engage-Digitize-Implement-Assess) model. Formative evaluations, consultation with experts in the digital platform of choice, and the experience of two P4 for Women Master Trainers informed our translation. The model guided the translation process as our research team worked alongside topical experts and a production company to develop storyboards for core curriculum activities, which were later scripted and filmed with mock participants. A user guide, toolkit, and program website were also developed as supplemental materials to accompany the video training. Lessons learned from this study indicate future attempts at digitizing TOFs should keep in mind that digitization can be a time-consuming process, pilot testing in the new format is necessary even for a previously tested intervention, and the structure provided by facilitators in face-to-face training must be embedded into the format of digitized trainings.

  4. Study of variance and covariance terms in linear attenuation coefficient measurements of irregular samples through the two media method by gamma-ray transmission

    International Nuclear Information System (INIS)

    Kuramoto, R.Y.R.Renato Yoichi Ribeiro.; Appoloni, Carlos Roberto

    2002-01-01

    The two media method permits the application of Beer's law (Thesis (Master Degree), Universidade Estadual de Londrina, PR, Brazil, pp. 23) for the linear attenuation coefficient determination of irregular thickness samples by gamma-ray transmission. However, the use of this methodology introduces experimental complexity due to the great number of variables to be measured. As consequence of this complexity, the uncertainties associated with each of these variables may be correlated. In this paper, we examine the covariance terms in the uncertainty propagation, and quantify the correlation among the uncertainties of each of the variables in question

  5. System and Method for Providing a Climate Data Analytic Services Application Programming Interface Distribution Package

    Science.gov (United States)

    Schnase, John L. (Inventor); Duffy, Daniel Q. (Inventor); Tamkin, Glenn S. (Inventor)

    2016-01-01

    A system, method and computer-readable storage devices for providing a climate data analytic services application programming interface distribution package. The example system can provide various components. The system provides a climate data analytic services application programming interface library that enables software applications running on a client device to invoke the capabilities of a climate data analytic service. The system provides a command-line interface that provides a means of interacting with a climate data analytic service by issuing commands directly to the system's server interface. The system provides sample programs that call on the capabilities of the application programming interface library and can be used as templates for the construction of new client applications. The system can also provide test utilities, build utilities, service integration utilities, and documentation.

  6. Social Media Impact of the Food and Drug Administration's Drug Safety Communication Messaging About Zolpidem: Mixed-Methods Analysis.

    Science.gov (United States)

    Sinha, Michael S; Freifeld, Clark C; Brownstein, John S; Donneyong, Macarius M; Rausch, Paula; Lappin, Brian M; Zhou, Esther H; Dal Pan, Gerald J; Pawar, Ajinkya M; Hwang, Thomas J; Avorn, Jerry; Kesselheim, Aaron S

    2018-01-05

    The Food and Drug Administration (FDA) issues drug safety communications (DSCs) to health care professionals, patients, and the public when safety issues emerge related to FDA-approved drug products. These safety messages are disseminated through social media to ensure broad uptake. The objective of this study was to assess the social media dissemination of 2 DSCs released in 2013 for the sleep aid zolpidem. We used the MedWatcher Social program and the DataSift historic query tool to aggregate Twitter and Facebook posts from October 1, 2012 through August 31, 2013, a period beginning approximately 3 months before the first DSC and ending 3 months after the second. Posts were categorized as (1) junk, (2) mention, and (3) adverse event (AE) based on a score between -0.2 (completely unrelated) to 1 (perfectly related). We also looked at Google Trends data and Wikipedia edits for the same time period. Google Trends search volume is scaled on a range of 0 to 100 and includes "Related queries" during the relevant time periods. An interrupted time series (ITS) analysis assessed the impact of DSCs on the counts of posts with specific mention of zolpidem-containing products. Chow tests for known structural breaks were conducted on data from Twitter, Facebook, and Google Trends. Finally, Wikipedia edits were pulled from the website's editorial history, which lists all revisions to a given page and the editor's identity. In total, 174,286 Twitter posts and 59,641 Facebook posts met entry criteria. Of those, 16.63% (28,989/174,286) of Twitter posts and 25.91% (15,453/59,641) of Facebook posts were labeled as junk and excluded. AEs and mentions represented 9.21% (16,051/174,286) and 74.16% (129,246/174,286) of Twitter posts and 5.11% (3,050/59,641) and 68.98% (41,138/59,641) of Facebook posts, respectively. Total daily counts of posts about zolpidem-containing products increased on Twitter and Facebook on the day of the first DSC; Google searches increased on the week of the

  7. MediaTracker system

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, D. M. (Dana M.); Strittmatter, R. B. (Richard B.); Abeyta, J. D. (Joline D.); Brown, J. (John); Marks, T. (Thomas), Jr.; Martinez, B. J. (Benny J.); Jones, D. B. (Dana Benelli); Hsue, W.

    2004-01-01

    The initial objectives of this effort were to provide a hardware and software platform that can address the requirements for the accountability of classified removable electronic media and vault access logging. The Media Tracker system software assists classified media custodian in managing vault access logging and Media Tracking to prevent the inadvertent violation of rules or policies for the access to a restricted area and the movement and use of tracked items. The MediaTracker system includes the software tools to track and account for high consequence security assets and high value items. The overall benefits include: (1) real-time access to the disposition of all Classified Removable Electronic Media (CREM), (2) streamlined security procedures and requirements, (3) removal of ambiguity and managerial inconsistencies, (4) prevention of incidents that can and should be prevented, (5) alignment with the DOE's initiative to achieve improvements in security and facility operations through technology deployment, and (6) enhanced individual responsibility by providing a consistent method of dealing with daily responsibilities. In response to initiatives to enhance the control of classified removable electronic media (CREM), the Media Tracker software suite was developed, piloted and implemented at the Los Alamos National Laboratory beginning in July 2000. The Media Tracker software suite assists in the accountability and tracking of CREM and other high-value assets. One component of the MediaTracker software suite provides a Laboratory-approved media tracking system. Using commercial touch screen and bar code technology, the MediaTracker (MT) component of the MediaTracker software suite provides an efficient and effective means to meet current Laboratory requirements and provides new-engineered controls to help assure compliance with those requirements. It also establishes a computer infrastructure at vault entrances for vault access logging, and can

  8. MediaTracker system

    International Nuclear Information System (INIS)

    Sandoval, D.M.; Strittmatter, R.B.; Abeyta, J.D.; Brown, J.; Marks, T. Jr.; Martinez, B.J.; Jones, D.B.; Hsue, W.

    2004-01-01

    The initial objectives of this effort were to provide a hardware and software platform that can address the requirements for the accountability of classified removable electronic media and vault access logging. The Media Tracker system software assists classified media custodian in managing vault access logging and Media Tracking to prevent the inadvertent violation of rules or policies for the access to a restricted area and the movement and use of tracked items. The MediaTracker system includes the software tools to track and account for high consequence security assets and high value items. The overall benefits include: (1) real-time access to the disposition of all Classified Removable Electronic Media (CREM), (2) streamlined security procedures and requirements, (3) removal of ambiguity and managerial inconsistencies, (4) prevention of incidents that can and should be prevented, (5) alignment with the DOE's initiative to achieve improvements in security and facility operations through technology deployment, and (6) enhanced individual responsibility by providing a consistent method of dealing with daily responsibilities. In response to initiatives to enhance the control of classified removable electronic media (CREM), the Media Tracker software suite was developed, piloted and implemented at the Los Alamos National Laboratory beginning in July 2000. The Media Tracker software suite assists in the accountability and tracking of CREM and other high-value assets. One component of the MediaTracker software suite provides a Laboratory-approved media tracking system. Using commercial touch screen and bar code technology, the MediaTracker (MT) component of the MediaTracker software suite provides an efficient and effective means to meet current Laboratory requirements and provides new-engineered controls to help assure compliance with those requirements. It also establishes a computer infrastructure at vault entrances for vault access logging, and can accommodate

  9. Instructional Media

    African Journals Online (AJOL)

    This can be summed up in a few words: Students can learn a great deal from any of the media. Under most of the conditions tested, they could learn as much as from ... Beyond physical conditions (deafness) there is little reason to expect a differential media. Scientia Militaria, South African Journal of Military Studies, Vol 13 ...

  10. Mixed Media

    Science.gov (United States)

    Peterson, Erin

    2010-01-01

    While institutions do not often have a hook as compelling as an eagerly awaited movie, great content is critical for media relations success--and coupling it with the right distribution channel can ensure the story finds the right audience. Even better, retooling it for several media platforms can extend the life and reach of a story. The changes…

  11. Media darling

    CERN Multimedia

    Chalmers, Matthew

    2008-01-01

    He is the media-friendly face of particle physics, appearing on countless TV and radio shows in the run-up to the opening of CERN's Large Hadron Collider. Matthew Chalmers discovers how Brian Cox finds the time to be both a physicist and a media personality. (2 pages)

  12. Media Art

    DEFF Research Database (Denmark)

    Ekman, Ulrik

    2015-01-01

    environments, experience time, and develop identities individually and socially. Interviews with working media artists lend further perspectives on these cultural transformations. Drawing on cultural theory, new media art studies, human-computer interaction theory, and software studies, this cutting-edge book...... critically unpacks the complex ubiquity-effects confronting us every day....

  13. On the use of flux limiters in the discrete ordinates method for 3D radiation calculations in absorbing and scattering media

    International Nuclear Information System (INIS)

    Godoy, William F.; DesJardin, Paul E.

    2010-01-01

    The application of flux limiters to the discrete ordinates method (DOM), S N , for radiative transfer calculations is discussed and analyzed for 3D enclosures for cases in which the intensities are strongly coupled to each other such as: radiative equilibrium and scattering media. A Newton-Krylov iterative method (GMRES) solves the final systems of linear equations along with a domain decomposition strategy for parallel computation using message passing libraries in a distributed memory system. Ray effects due to angular discretization and errors due to domain decomposition are minimized until small variations are introduced by these effects in order to focus on the influence of flux limiters on errors due to spatial discretization, known as numerical diffusion, smearing or false scattering. Results are presented for the DOM-integrated quantities such as heat flux, irradiation and emission. A variety of flux limiters are compared to 'exact' solutions available in the literature, such as the integral solution of the RTE for pure absorbing-emitting media and isotropic scattering cases and a Monte Carlo solution for a forward scattering case. Additionally, a non-homogeneous 3D enclosure is included to extend the use of flux limiters to more practical cases. The overall balance of convergence, accuracy, speed and stability using flux limiters is shown to be superior compared to step schemes for any test case.

  14. Communications and media services

    Science.gov (United States)

    Mcculla, James W.; Kukowski, James F.

    1990-01-01

    NASA's internal and external communication methods are reviewed. NASA information services for the media, for the public, and for employees are discussed. Consideration is given to electron information distribution, the NASA TV-audio system, the NASA broadcast news service, astronaut appearances, technology and information exhibits, speaker services, and NASA news reports for internal communications. Also, the NASA worldwide electronic mail network is described and trends for future NASA communications and media services are outlined.

  15. Optimisation of decontamination method and influence of culture media on the recovery of Mycobacterium avium subspecies paratuberculosis from spiked water sediments.

    Science.gov (United States)

    Aboagye, G; Rowe, M T

    2018-07-01

    The recovery of Mycobacterium avium subspecies paratuberculosis (Map) from the environment can be a laborious process - owing to Map being fastidious, its low number, and also high numbers of other microbial populations in such settings. Protocols i.e. filtration, decontamination and modified elution were devised to recover Map from spiked water sediments. Three culture media: Herrold's Egg Yolk Media (HEYM), Middlebrook 7H10 (M-7H10) and Bactec 12B were then employed to grow the organism following its elution. In the sterile sediment samples the recovery of Map was significant between the time of exposure for each of HEYM and M-7H10, and insignificant between both media (P < 0.05). However, in the non-sterile sediment samples, the HEYM grew other background microflora including moulds at all the times of exposure whilst 4 h followed by M-7H10 culture yielded Map colonies without any background microflora. Using sterile samples only for the Bactec 12B, the recovery of Map decreased as time of exposure increased. Based on these findings, M-7H10 should be considered for the recovery of Map from the natural environment including water sediments where the recovery of diverse microbial species remains a challenge. Map is a robust pathogen that abides in the environment. In water treatment operations, Map associates with floccules and other particulate matter including sediments. It is also a fastidious organism, and its detection and recovery from the water environment is a laborious process and can be misleading within the abundance of other mycobacterial species owing to their close resemblance in phylogenetic traits. In the absence of a reliable recovery method, Map continues to pose public health risks through biofilm in household water tanks, hence the need for the development of a reliable recovery protocol to monitor the presence of Map in water systems in order to curtail its public health risks. Copyright © 2018 Elsevier B.V. All rights reserved.

  16. A short tutorial contribution to impedance and AC-electrokinetic characterization and manipulation of cells and media: Are electric methods more versatile than acoustic and laser methods?

    Directory of Open Access Journals (Sweden)

    Jan Gimsa

    2014-11-01

    Full Text Available Lab-on-chip systems (LOCs can be used as in vitro systems for cell culture or manipulation in order to analyze or monitor physiological cell parameters. LOCs may combine microfluidic structures with integrated elements such as piezo-transducers, optical tweezers or electrodes for AC-electrokinetic cell and media manipulations. The wide frequency band (<1 kHz to >1 GHz usable for AC-electrokinetic manipulation and characterization permits avoiding electrochemical electrode processes, undesired cell damage, and provides a choice between different polarization effects that permit a high electric contrast between the cells and the external medium as well as the differentiation between cellular subpopulations according to a variety of parameters. It has been shown that structural polarization effects do not only determine the impedance of cell suspensions and the force effects in AC-electrokinetics but can also be used for the manipulation of media with inhomogeneous temperature distributions. This manuscript considers the interrelations of the impedance of suspensions of cells and AC-electrokinetic single cell effects, such as electroorientation, electrodeformation, dielectrophoresis, electrorotation, and travelling wave (TW dielectrophoresis. Unified models have allowed us to derive new characteristic equations for the impedance of a suspension of spherical cells, TW dielectrophoresis, and TW pumping. A critical review of the working principles of electro-osmotic, TW and electrothermal micropumps shows the superiority of the electrothermal pumps. Finally, examples are shown for LOC elements that can be produced as metallic structures on glass chips, which may form the bottom plate for self-sealing microfluidic systems. The structures can be used for cell characterization and manipulation but also to realize micropumps or sensors for pH, metabolites, cell-adhesion, etc.

  17. An $h$-Adaptive Operator Splitting Method for Two-Phase Flow in 3D Heterogeneous Porous Media

    KAUST Repository

    Chueh, Chih-Che; Djilali, Ned; Bangerth, Wolfgang

    2013-01-01

    The simulation of multiphase flow in porous media is a ubiquitous problem in a wide variety of fields, such as fuel cell modeling, oil reservoir simulation, magma dynamics, and tumor modeling. However, it is computationally expensive. This paper presents an interconnected set of algorithms which we show can accelerate computations by more than two orders of magnitude compared to traditional techniques, yet retains the high accuracy necessary for practical applications. Specifically, we base our approach on a new adaptive operator splitting technique driven by an a posteriori criterion to separate the flow from the transport equations, adaptive meshing to reduce the size of the discretized problem, efficient block preconditioned solver techniques for fast solution of the discrete equations, and a recently developed artificial diffusion strategy to stabilize the numerical solution of the transport equation. We demonstrate the accuracy and efficiency of our approach using numerical experiments in one, two, and three dimensions using a program that is made available as part of a large open source library. © 2013 Society for Industrial and Applied Mathematics.

  18. Bayesian uncertainty quantification for flows in heterogeneous porous media using reversible jump Markov chain Monte Carlo methods

    KAUST Repository

    Mondal, A.

    2010-03-01

    In this paper, we study the uncertainty quantification in inverse problems for flows in heterogeneous porous media. Reversible jump Markov chain Monte Carlo algorithms (MCMC) are used for hierarchical modeling of channelized permeability fields. Within each channel, the permeability is assumed to have a lognormal distribution. Uncertainty quantification in history matching is carried out hierarchically by constructing geologic facies boundaries as well as permeability fields within each facies using dynamic data such as production data. The search with Metropolis-Hastings algorithm results in very low acceptance rate, and consequently, the computations are CPU demanding. To speed-up the computations, we use a two-stage MCMC that utilizes upscaled models to screen the proposals. In our numerical results, we assume that the channels intersect the wells and the intersection locations are known. Our results show that the proposed algorithms are capable of capturing the channel boundaries and describe the permeability variations within the channels using dynamic production history at the wells. © 2009 Elsevier Ltd. All rights reserved.

  19. Adapting instruments and modifying statements: The confirmation method for the inventory and model for information sharing behavior using social media

    Directory of Open Access Journals (Sweden)

    Tiny Azleen Binti Yahaya

    2018-05-01

    Full Text Available This study aims to confirm the information sharing behavior using social media scale and to vali-date every item and make it reliable as an inventory by using Exploratory Factor Analysis (EFA. The researcher adapted the measuring instruments for every latent construct from the literature and customized the items to suit this particular study. The study sent the revised questionnaire to 262 respondents in order to gather the pilot study data and able to get 163 filled ones as final data. The set of questionnaires consists of 66 items that assess the 6 constructs. Data is analyzed using SPSS AMOS Version 21.0. The results show that every construct achieved its Bartletts’ Test of Spherici-ty 6.0 with the result of Information Sharing Behavior .000 and .871; Intention .000 and .782; Belief Expectancy .000 and .911; Attitude Influence .000 and .925; Readiness For Change .000 and .959; and Self-Efficacy .000 and .902. The entire item of the construct has exceeded the minimum limit of 0.7 reliability of Alpha Cronbach value to achieve the Internal Reliability. The new integrate model has been proposed due to this finding.

  20. Media violence.

    Science.gov (United States)

    Cantor, J

    2000-08-01

    Research on the effects of media violence is not well understood by the general public. Despite this fact, there is an overwhelming consensus in the scientific literature about the unhealthy effects of media violence. Meta-analyses show that media-violence viewing consistently is associated with higher levels of antisocial behavior, ranging from the trivial (imitative violence directed against toys) to the serious (criminal violence), with many consequential outcomes in between (acceptance of violence as a solution to problems, increased feelings of hostility, and the apparent delivery of painful stimulation to another person). Desensitization is another well-documented effect of viewing violence, which is observable in reduced arousal and emotional disturbance while witnessing violence, the reduced tendency to intervene in a fight, and less sympathy for the victims of violence. Although there is evidence that youth who are already violent are more likely to seek out violent entertainment, there is strong evidence that the relationship between violence viewing and antisocial behavior is bidirectional. There is growing evidence that media violence also engenders intense fear in children which often lasts days, months, and even years. The media's potential role in solutions to these problems is only beginning to be explored, in investigations examining the uses and effects of movie ratings, television ratings, and the V-chip, and the effects of media literacy programs and public education efforts. Future research should explore important individual differences in responses to media violence and effective ways to intervene in the negative effects.

  1. Improving estimates of subsurface gas transport in unsaturated fractured media using experimental Xe diffusion data and numerical methods

    Science.gov (United States)

    Ortiz, J. P.; Ortega, A. D.; Harp, D. R.; Boukhalfa, H.; Stauffer, P. H.

    2017-12-01

    Gas transport in unsaturated fractured media plays an important role in a variety of applications, including detection of underground nuclear explosions, transport from volatile contaminant plumes, shallow CO2 leakage from carbon sequestration sites, and methane leaks from hydraulic fracturing operations. Gas breakthrough times are highly sensitive to uncertainties associated with a variety of hydrogeologic parameters, including: rock type, fracture aperture, matrix permeability, porosity, and saturation. Furthermore, a couple simplifying assumptions are typically employed when representing fracture flow and transport. Aqueous phase transport is typically considered insignificant compared to gas phase transport in unsaturated fracture flow regimes, and an assumption of instantaneous dissolution/volatilization of radionuclide gas is commonly used to reduce computational expense. We conduct this research using a twofold approach that combines laboratory gas experimentation and numerical modeling to verify and refine these simplifying assumptions in our current models of gas transport. Using a gas diffusion cell, we are able to measure air pressure transmission through fractured tuff core samples while also measuring Xe gas breakthrough measured using a mass spectrometer. We can thus create synthetic barometric fluctuations akin to those observed in field tests and measure the associated gas flow through the fracture and matrix pore space for varying degrees of fluid saturation. We then attempt to reproduce the experimental results using numerical models in PLFOTRAN and FEHM codes to better understand the importance of different parameters and assumptions on gas transport. Our numerical approaches represent both single-phase gas flow with immobile water, as well as full multi-phase transport in order to test the validity of assuming immobile pore water. Our approaches also include the ability to simulate the reaction equilibrium kinetics of dissolution

  2. Homogenization of discrete media

    International Nuclear Information System (INIS)

    Pradel, F.; Sab, K.

    1998-01-01

    Material such as granular media, beam assembly are easily seen as discrete media. They look like geometrical points linked together thanks to energetic expressions. Our purpose is to extend discrete kinematics to the one of an equivalent continuous material. First we explain how we build the localisation tool for periodic materials according to estimated continuum medium type (classical Cauchy, and Cosserat media). Once the bridge built between discrete and continuum media, we exhibit its application over two bidimensional beam assembly structures : the honey comb and a structural reinforced variation. The new behavior is then applied for the simple plan shear problem in a Cosserat continuum and compared with the real discrete solution. By the mean of this example, we establish the agreement of our new model with real structures. The exposed method has a longer range than mechanics and can be applied to every discrete problems like electromagnetism in which relationship between geometrical points can be summed up by an energetic function. (orig.)

  3. From Augmentation Media to Meme Media.

    Science.gov (United States)

    Tanaka, Yuzuru

    Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

  4. Measurement of the electronic density of ionised media by hyper frequency methods; Mesure de la densite electronique des milieux ionises par des methodes hyperfrequences

    Energy Technology Data Exchange (ETDEWEB)

    Consoli, T [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Within the limits of the I.N.S.T.N. courses on plasmas, this analytical study summarizes the articles quoted in the references on hyper-frequency techniques for the measurement of electronic density of an ionised gas. It is neither exhaustive nor complete and further details may be obtained by referring to the works mentioned. The first part, devoted to the theoretical side, concert the propagation of electromagnetic waves ionised media and the excitation of stationary raves in electromagnetic cavities. The second part deals with the measurement techniques themselves. It includes those techniques which hare become classic, and also more recent ones being developed in various laboratories and in the Service of Applied Physics at Saclay. (author) [French] Dans le cadre des cours sur les plasmas a l'l.N.S.T. cette etude d'analyse resume les articles cites en bibliographie sur les techniques hyperfrequences pour la mesure de la densite electronique d'un gas ionise. Elle n'est ni exhaustive, ni complete. Pour plus de details on voudra bien se rapporter aux travaux mentionnes. La premiere partie consacree a des rappels theoriques, concerne la propagation des ondes electromagnetiques dans les milieux ionises et sur l'excitation d'ondes stationnaires dans les cavites electromagnetiques. La seconde se rapporte aux techniques de mesures proprement dites. On a fait figurer dans cette partie des techniques devenues classiques et celles plus recentes en cours d'etudes dans divers laboratoires et au Service de Physique Appliquee a SACLAY. (auteur)

  5. The finite element model for the propagation of light in scattering media: a direct method for domains with nonscattering regions.

    Science.gov (United States)

    Arridge, S R; Dehghani, H; Schweiger, M; Okada, E

    2000-01-01

    We present a method for handling nonscattering regions within diffusing domains. The method develops from an iterative radiosity-diffusion approach using Green's functions that was computationally slow. Here we present an improved implementation using a finite element method (FEM) that is direct. The fundamental idea is to introduce extra equations into the standard diffusion FEM to represent nondiffusive light propagation across a nonscattering region. By appropriate mesh node ordering the computational time is not much greater than for diffusion alone. We compare results from this method with those from a discrete ordinate transport code, and with Monte Carlo calculations. The agreement is very good, and, in addition, our scheme allows us to easily model time-dependent and frequency domain problems.

  6. Convergence analysis of the nonlinear iterative method for two-phase flow in porous media associated with nanoparticle injection

    KAUST Repository

    El-Amin, Mohamed; Kou, Jisheng; Sun, Shuyu

    2017-01-01

    –IMplicit Concentration) scheme is used to solve the problem under consideration. The governing equations are discretized using the cell-centered finite difference (CCFD) method. The pressure and saturation equations are coupled to calculate the pressure

  7. Comparative analysis of methods for measurements of food intake and utilization using the soybean looper, Pseudoplusia includens and artificial media

    International Nuclear Information System (INIS)

    Parra, J.R.P.; Kogan, M.; Illinois Agricultural Experiment Station, Urbana; Illinois Univ., Urbana

    1981-01-01

    An analysis of intake and utilization of an artificial medium by larvae of the soybean looper, Pseudoplusia includens Walker, Lepidoptera: Noctuidae, was performed using 4 methods: standard gravimetric, chromic oxide, Calco Oil Red, and 14 C-glucose. Each method was used in conjunction with standard gravimetry. The relative merits of the indirect methods were analyzed in terms of precision and accuracy for ECI and ECD estimation, cost, and overall versatility. Only the gravimetric method combined ca. 80% precision in ECI and ECD estimation with low cost and maximum versatility. Calco Oil Red at 0.1% w/v was detrimental to the larvae. Cr 2 O 3 caused reduced intake but conversion was increased resulting in normal development and growth of larvae. The radioisotopic method had the advantage of providing a direct means of measuring expired CO 2 . The need to operate under a totally enclosed system, however, poses some serious difficulties in the use of radioisotopes. There seems to be little advantage in any of the proposed indirect methods, except if there are unusual difficulties in separating the excreta from the medium. (orig.)

  8. The element level time domain (ELTD) method for the analysis of nano-optical systems: I. Nondispersive media

    Science.gov (United States)

    Fallahi, Arya; Oswald, Benedikt; Leidenberger, Patrick

    2012-04-01

    We study a 3-dimensional, dual-field, fully explicit method for the solution of Maxwell's equations in the time domain on unstructured, tetrahedral grids. The algorithm uses the element level time domain (ELTD) discretization of the electric and magnetic vector wave equations. In particular, the suitability of the method for the numerical analysis of nanometer structured systems in the optical region of the electromagnetic spectrum is investigated. The details of the theory and its implementation as a computer code are introduced and its convergence behavior as well as conditions for stable time domain integration is examined. Here, we restrict ourselves to non-dispersive dielectric material properties since dielectric dispersion will be treated in a subsequent paper. Analytically solvable problems are analyzed in order to benchmark the method. Eventually, a dielectric microlens is considered to demonstrate the potential of the method. A flexible method of 2nd order accuracy is obtained that is applicable to a wide range of nano-optical configurations and can be a serious competitor to more conventional finite difference time domain schemes which operate only on hexahedral grids. The ELTD scheme can resolve geometries with a wide span of characteristic length scales and with the appropriate level of detail, using small tetrahedra where delicate, physically relevant details must be modeled.

  9. Development of numerical simulation method for gas migration through highly-compacted bentonite using model of two-phase flow through deformable porous media

    International Nuclear Information System (INIS)

    Tanaka, Yukihisa

    2011-01-01

    In the current concept of repository for radioactive waste disposal, compacted bentonite will be used as an engineered barrier mainly for inhibiting migration of radioactive nuclides. Hydrogen gas can be generated inside of the engineered barrier by anaerobic corrosion of metals used for containers, etc. It is expected to be not easy for gas to entering into the bentonite as a discrete gaseous phase because the pore of compacted bentonite is so minute. Therefore it is necessary to investigate the effect of gas pressure generation and gas migration on the engineered barrier, peripheral facilities and ground. In this study, a method for simulating gas migration through the compacted bentonite is proposed. The proposed method can analyze coupled hydrological-mechanical processes using the model of two-phase flow through deformable porous media. Validity of the proposed analytical method is examined by comparing gas migration test results with the calculated results, which revealed that the proposed method can simulate gas migration behavior through compacted bentonite with accuracy. (author)

  10. Methods and Tools to allow molecular flow simulations to be coupled to higher level continuum descriptions of flows in porous/fractured media and aerosol/dust dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Loyalka, Sudarshan [Univ. of Missouri, Columbia, MO (United States)

    2015-04-09

    The purpose of this project was to develop methods and tools that will aid in safety evaluation of nuclear fuels and licensing of nuclear reactors relating to accidents.The objectives were to develop more detailed and faster computations of fission product transport and aerosol evolution as they generally relate to nuclear fuel and/or nuclear reactor accidents. The two tasks in the project related to molecular transport in nuclear fuel and aerosol transport in reactor vessel and containment. For both the tasks, explorations of coupling of Direct Simulation Monte Carlo with Navier-Stokes solvers or the Sectional method were not successful. However, Mesh free methods for the Direct Simulation Monte Carlo method were successfully explored.These explorations permit applications to porous and fractured media, and arbitrary geometries.The computations were carried out in Mathematica and are fully parallelized. The project has resulted in new computational tools (algorithms and programs) that will improve the fidelity of computations to actual physics, chemistry and transport of fission products in the nuclear fuel and aerosol in reactor primary and secondary containments.

  11. Stokes vector based interpolation method to improve the efficiency of bio-inspired polarization-difference imaging in turbid media

    Science.gov (United States)

    Guan, Jinge; Ren, Wei; Cheng, Yaoyu

    2018-04-01

    We demonstrate an efficient polarization-difference imaging system in turbid conditions by using the Stokes vector of light. The interaction of scattered light with the polarizer is analyzed by the Stokes-Mueller formalism. An interpolation method is proposed to replace the mechanical rotation of the polarization axis of the analyzer theoretically, and its performance is verified by the experiment at different turbidity levels. We show that compared with direct imaging, the Stokes vector based imaging method can effectively reduce the effect of light scattering and enhance the image contrast.

  12. METHOD FOR DETERMINATION OF THERMAL CHARACTERISTICS OF THE LAYER OF GRANULAR MEDIA WITH ELEMENTS OF PULSED THERMAL NDT

    Directory of Open Access Journals (Sweden)

    Y. V. Shokina

    2015-01-01

    Full Text Available At the Department of Food Production of Murmansk State Technical University (MSTU was developed a method of producing smoke fuel using infrared energy supply. The method provides a stable temperature pyrolysis of wood fuel is less than 400 ° C. Kinetic of the heating layer of fuel (wooden chips is affected by chip's density and moisture content. The method of calculating of the optimum modes of smoke produce, which is based on a system of differential equations of heat and mass transfer in the IR smoke generator, was previously proposed. The system of equations includes thermal characteristics (TC of the fuel layer (e.g. specific heat, thermal conductivity, thermal diffusivity. The exact definition of these characteristics affect the accuracy of the experimental calculation of optimal process conditions with use of the developed software. A definition of layer's TC by a method with elements of pulsed thermal NDT. The use of thermal imager is proposed for measuring the temperature of the irritated surface of the porous wooden chip's lawyer.

  13. Calculation of breaking radiation dose fields in heterogenous media by a method of the transformation of axial distribution

    International Nuclear Information System (INIS)

    Mil'shtejn, R.S.

    1988-01-01

    Analysis of dose fields in a heterogeneous tissue equivalent medium has shown that dose distributions have radial symmetry and can be described by a curve of axial distribution with renormalization of maximum ionization depth. A method of the calculation of a dose field in a heterogeneous medium using the principle of radial symmetry is presented

  14. An efficient spatial spectral integral-equation method for EM scattering from finite objects in layered media

    NARCIS (Netherlands)

    Dilz, R.J.; van Beurden, M.C.

    2016-01-01

    We propose a mixed spatial spectral method aimed directly at aperiodic, finite scatterers in a layered medium. By using a Gabor frame to discretize the problem a straightforward and fast way to Fourier transform is available. The poles and branchcuts in the spectral-domain Green function can be

  15. An integral equation method for the homogenization of unidirectional fibre-reinforced media; antiplane elasticity and other potential problems.

    Science.gov (United States)

    Joyce, Duncan; Parnell, William J; Assier, Raphaël C; Abrahams, I David

    2017-05-01

    In Parnell & Abrahams (2008 Proc. R. Soc. A 464 , 1461-1482. (doi:10.1098/rspa.2007.0254)), a homogenization scheme was developed that gave rise to explicit forms for the effective antiplane shear moduli of a periodic unidirectional fibre-reinforced medium where fibres have non-circular cross section. The explicit expressions are rational functions in the volume fraction. In that scheme, a (non-dilute) approximation was invoked to determine leading-order expressions. Agreement with existing methods was shown to be good except at very high volume fractions. Here, the theory is extended in order to determine higher-order terms in the expansion. Explicit expressions for effective properties can be derived for fibres with non-circular cross section, without recourse to numerical methods. Terms appearing in the expressions are identified as being associated with the lattice geometry of the periodic fibre distribution, fibre cross-sectional shape and host/fibre material properties. Results are derived in the context of antiplane elasticity but the analogy with the potential problem illustrates the broad applicability of the method to, e.g. thermal, electrostatic and magnetostatic problems. The efficacy of the scheme is illustrated by comparison with the well-established method of asymptotic homogenization where for fibres of general cross section, the associated cell problem must be solved by some computational scheme.

  16. Influence of irrigation method and container type on Northern red oak seedling growth and media electrical conductivity

    Science.gov (United States)

    Anthony S. Davis; Douglass F. Jacobs; Ronald P. Overton; R. Kasten Dumroese

    2008-01-01

    Container production of hardwood seedlings has not been extensively practiced. Efficient nursery production of hardwood seedlings in containers can be limited by formation of a broad foliar canopy, which limits irrigation uniformity. This study was established to investigate suitability of subirrigation, a method of irrigating seedlings from the container base that...

  17. Evaluation of a new solid boundary implementation in the lattice Boltzmann method for porous media considering permeability and apparent slip.

    Science.gov (United States)

    Moqtaderi, Hamed; Esfahanian, Vahid

    2011-06-13

    The accuracy of solid wall treatment in the lattice Boltzmann method (LBM) simulation of porous structures affects different hydraulic parameters including integral properties, such as permeability, or local phenomena, such as apparent slip. Based on an analysis of the advantages and disadvantages of the current methods, a new technique is introduced for exact boundary extraction from binary representation. Using this technique, the LBM model can simultaneously benefit from the advantages of existing approaches, i.e. the real micro-/nanostructure obtained with X-ray computed tomography, and a reduction in the resolution requirement. To evaluate the technique, permeability and slip length on the solid walls are investigated for a porous gas diffusion layer. The results show acceptable accuracy improvement balanced with computational costs.

  18. Forward and inverse problems for surface acoustic waves in anisotropic media: A Ritz-Rayleigh method based approach

    Czech Academy of Sciences Publication Activity Database

    Stoklasová, Pavla; Sedlák, Petr; Seiner, Hanuš; Landa, Michal

    2015-01-01

    Roč. 56, February 2015 (2015), s. 381-389 ISSN 0041-624X R&D Projects: GA ČR GPP101/12/P428 Institutional support: RVO:61388998 Keywords : surface acoustic waves * anisotropic materials * Ritz-Rayleigh method * inverse problem Subject RIV: BI - Acoustics Impact factor: 1.954, year: 2015 http://www.sciencedirect.com/science/article/pii/S0041624X14002686

  19. Improved methods for the fluorographic detection of weak β-emitting radioisotopes in agarose and acrylamide gel electrophoresis media

    International Nuclear Information System (INIS)

    Pulleyblank, D.E.; Booth, G.M.

    1981-01-01

    The use of acetic acid as a solvent for diphenyloxazole (PPO) in fluorographic procedures has been investigated. It is demonstrated to be superior to both dimethyl sulfoxide and methanol with respect to its suitability in both agarose and acrylamide gel electrophoresis systems. In addition, a method has been developed for impregnating fragile gels such as those used for immunodiffusion with PPO in preparation for fluorography. (Auth.)

  20. An efficient fully-implicit multislope MUSCL method for multiphase flow with gravity in discrete fractured media

    Science.gov (United States)

    Jiang, Jiamin; Younis, Rami M.

    2017-06-01

    The first-order methods commonly employed in reservoir simulation for computing the convective fluxes introduce excessive numerical diffusion leading to severe smoothing of displacement fronts. We present a fully-implicit cell-centered finite-volume (CCFV) framework that can achieve second-order spatial accuracy on smooth solutions, while at the same time maintain robustness and nonlinear convergence performance. A novel multislope MUSCL method is proposed to construct the required values at edge centroids in a straightforward and effective way by taking advantage of the triangular mesh geometry. In contrast to the monoslope methods in which a unique limited gradient is used, the multislope concept constructs specific scalar slopes for the interpolations on each edge of a given element. Through the edge centroids, the numerical diffusion caused by mesh skewness is reduced, and optimal second order accuracy can be achieved. Moreover, an improved smooth flux-limiter is introduced to ensure monotonicity on non-uniform meshes. The flux-limiter provides high accuracy without degrading nonlinear convergence performance. The CCFV framework is adapted to accommodate a lower-dimensional discrete fracture-matrix (DFM) model. Several numerical tests with discrete fractured system are carried out to demonstrate the efficiency and robustness of the numerical model.

  1. Some robust numerical methods for flow and transport in porous media; Quelques methodes numeriques robustes pour l'ecoulement et le transport en milieu poreux

    Energy Technology Data Exchange (ETDEWEB)

    Sboui, A

    2007-01-15

    The aim of this thesis is to model and develop numerical tools adapted to study underground water flow and the propagation of pollutants in a porous medium. The main motivation of this work is a benchmark from GDR Momas and ANDRA to simulate the 3-D propagation of radionuclides around a deep disposal of nuclear waste. Firstly, we construct a new mixed finite elements method suitable for general hexahedral meshes. Convergence of the method is proved and shown in numerical experiments. Secondly, we present a method of time discretization for the advection equation which allows for the use of different time steps in different sub-domains in order to take into account of strong heterogeneities. Finally a numerical method for the calculation of the transport of contaminants is proposed. The techniques above were implemented in a 3-D code and simulation results are shown on the 3-D far field benchmark from GDR Momas and ANDRA. (author)

  2. Some robust numerical methods for flow and transport in porous media; Quelques methodes numeriques robustes pour l'ecoulement et le transport en milieu poreux

    Energy Technology Data Exchange (ETDEWEB)

    Sboui, A

    2007-01-15

    The aim of this thesis is to model and develop numerical tools adapted to study underground water flow and the propagation of pollutants in a porous medium. The main motivation of this work is a benchmark from GDR Momas and ANDRA to simulate the 3-D propagation of radionuclides around a deep disposal of nuclear waste. Firstly, we construct a new mixed finite elements method suitable for general hexahedral meshes. Convergence of the method is proved and shown in numerical experiments. Secondly, we present a method of time discretization for the advection equation which allows for the use of different time steps in different sub-domains in order to take into account of strong heterogeneities. Finally a numerical method for the calculation of the transport of contaminants is proposed. The techniques above were implemented in a 3-D code and simulation results are shown on the 3-D far field benchmark from GDR Momas and ANDRA. (author)

  3. Automatic method for estimation of in situ effective contact angle from X-ray micro tomography images of two-phase flow in porous media.

    Science.gov (United States)

    Scanziani, Alessio; Singh, Kamaljit; Blunt, Martin J; Guadagnini, Alberto

    2017-06-15

    Multiphase flow in porous media is strongly influenced by the wettability of the system, which affects the arrangement of the interfaces of different phases residing in the pores. We present a method for estimating the effective contact angle, which quantifies the wettability and controls the local capillary pressure within the complex pore space of natural rock samples, based on the physical constraint of constant curvature of the interface between two fluids. This algorithm is able to extract a large number of measurements from a single rock core, resulting in a characteristic distribution of effective in situ contact angle for the system, that is modelled as a truncated Gaussian probability density distribution. The method is first validated on synthetic images, where the exact angle is known analytically; then the results obtained from measurements within the pore space of rock samples imaged at a resolution of a few microns are compared to direct manual assessment. Finally the method is applied to X-ray micro computed tomography (micro-CT) scans of two Ketton cores after waterflooding, that display water-wet and mixed-wet behaviour. The resulting distribution of in situ contact angles is characterized in terms of a mixture of truncated Gaussian densities. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  4. METHOD FOR SIMULTANEOUS 90SR AND 137CS IN-VIVO MEASUREMENTS OF SMALL ANIMALS AND OTHER ENVIRONMENTAL MEDIA DEVELOPED FOR THE CONDITIONS OF THE CHERNOBYL EXCLUSION ZONE

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Jannik, T.

    2011-10-01

    To perform in vivo simultaneous measurements of the {sup 90}Sr and {sup 137}Cs content in the bodies of animals living in the Chernobyl Exclusion Zone (ChEZ), an appropriate method and equipment were developed and installed in a mobile gamma beta spectrometry laboratory. This technique was designed for animals of relatively small sizes (up to 50 g). The {sup 90}Sr content is measured by a beta spectrometer with a 0.1 mm thick scintillation plastic detector. The spectrum processing takes into account the fact that the measured object is 'thick-layered' and contains a comparable quantity of {sup 137}Cs, which is a characteristic condition of the ChEZ. The {sup 137}Cs content is measured by a NaI scintillation detector that is part of the combined gamma beta spectrometry system. For environmental research performed in the ChEZ, the advantages of this method and equipment (rapid measurements, capability to measure live animals directly in their habitat, and the capability of simultaneous {sup 90}Sr and {sup 137}Cs measurements) far outweigh the existing limitations (considerations must be made for background radiation and the animal size, skeletal shape and body mass). The accuracy of these in vivo measurements is shown to be consistent with standard spectrometric and radiochemical methods. Apart from the in vivo measurements, the proposed methodology, after a very simple upgrade that is also described in the article, works even more accurately with samples of other media, such as soil and plants.

  5. Nuclear methods applied for studies of contact phenomena in metal-fluid media and between metallic components in relative motion

    International Nuclear Information System (INIS)

    Racolta, P.M.; Popa-Simil, L.; Voiculescu, Dana; Muntele, C. I.

    1997-01-01

    The two main goals of this research project were: establishing of an activation methodology for metallic structures using accelerated beams obtained at our cyclotron and adapting the spectrometric analysis methods of the gamma radiations for corrosion level determinations. The developed methods, including the calibration (relations between the radioactivity level and the thickness of removed layer due to corrosion), were based on the remnant radioactivity measuring method. The experiments were focused on a proper selection of the nuclear reaction to be utilised for measurements, depending on the type of metallic alloys investigated. This study also consisted of optimizing the irradiation (particle, energy and dose) and cooling time so as to obtain a measuring sensitivity of 0.1-1μm for Fe, Ti, V, Cr, Cu, Mo based alloys. A portable two-channel γ-spectrometric installation was adapted to a customer's corrosion testing stand. Corrosion levels of a Romanian-made injection pump working with different types of Diesel oils and Diesel oil + special additives + water mixtures were determined. The nuclear reactions used were 56 Fe (p,n) 56 Co and 56 Fe (d,n) 57 Co. A selected area of the pump's piston was activated up to 30 μm. The testing programme was made for 300 h working times on the test stand; corrosion levels of approx. 0.3 μm were observed. In cooperation with a group from Tribology Laboratory from the Bucharest Technical University, Ti-coated pallets of a water pump were tested in their near real working environment - salty and sandy water. The 48 Ti (p,n) 48 V nuclear reaction was used for labelling a Ti thickness up to 50 μm. In this experiment, the main interest was to determine the minimum detectable corroded thickness by this radiotracer - based method. Our measurements showed that sensitivities of 0.05 - 1 μm can be achieved. In 1996, in cooperation with the National Institute for Thermal Engines, the wear of the piston ring - cylinder jacket friction

  6. Modeling Transport in Fractured Porous Media with the Random-Walk Particle Method: The Transient Activity Range and the Particle-Transfer Probability

    International Nuclear Information System (INIS)

    Lehua Pan; G.S. Bodvarsson

    2001-01-01

    Multiscale features of transport processes in fractured porous media make numerical modeling a difficult task, both in conceptualization and computation. Modeling the mass transfer through the fracture-matrix interface is one of the critical issues in the simulation of transport in a fractured porous medium. Because conventional dual-continuum-based numerical methods are unable to capture the transient features of the diffusion depth into the matrix (unless they assume a passive matrix medium), such methods will overestimate the transport of tracers through the fractures, especially for the cases with large fracture spacing, resulting in artificial early breakthroughs. We have developed a new method for calculating the particle-transfer probability that can capture the transient features of diffusion depth into the matrix within the framework of the dual-continuum random-walk particle method (RWPM) by introducing a new concept of activity range of a particle within the matrix. Unlike the multiple-continuum approach, the new dual-continuum RWPM does not require using additional grid blocks to represent the matrix. It does not assume a passive matrix medium and can be applied to the cases where global water flow exists in both continua. The new method has been verified against analytical solutions for transport in the fracture-matrix systems with various fracture spacing. The calculations of the breakthrough curves of radionuclides from a potential repository to the water table in Yucca Mountain demonstrate the effectiveness of the new method for simulating 3-D, mountain-scale transport in a heterogeneous, fractured porous medium under variably saturated conditions

  7. The Effectiveness Of Social Media (Facebook) Compared With More Traditional Advertising Methods for Recruiting Eligible Participants To Health Research Studies: A Randomized, Controlled Clinical Trial

    OpenAIRE

    Frandsen, Mai; Thow, Megan; Ferguson, Stuart G

    2016-01-01

    Background Recruiting participants for research studies can be difficult and costly. The popularity of social media platforms (eg, Facebook) has seen corresponding growth in the number of researchers turning to social networking sites and their embedded advertising frameworks to locate eligible participants for studies. Compared with traditional recruitment strategies such as print media, social media advertising has been shown to be favorable in terms of its reach (especially with hard-to-re...

  8. Quenching of porous silicon photoluminescence by molecular oxygen and dependence of this phenomenon on storing media and method of preparation of pSi photosensitizer

    Science.gov (United States)

    Balaguer, María; Matveeva, Eugenia

    2010-10-01

    The quenching of porous silicon photoluminescence (pSi PL) by molecular oxygen has been studied in different storing media in an attempt to clarify the mechanism of the energy transfer from the silicon photosensitizer to the oxygen acceptor. Luminescent materials have been prepared by two methods: electrochemical anodizing and chemical etching. Different structural forms were used: porous layers on silicon wafer and two kinds of differently prepared powder. Dry air and liquid water were employed as storing media; quenching behaviour was under observation until total degradation of quenching properties. Singlet oxygen molecules generation through energy transfer from photoluminescent pSi was the only photosensitizing mechanism observed under dry gas conditions. This PL quenching process was preferentially developed at 760 nm (1.63 eV) that corresponds to the formation of the 1Σ singlet oxygen state. Oxidation of the pSi photosensitizer was the main factor that led to its total deactivation in a time scale of few weeks. Regarding water medium, different photosensitizing behaviour was observed. In watery conditions, two preferred energy levels were found: the one detected in dry gas and another centred at approximately 2.2 eV (550 nm). Formation of reactive oxygen species (ROS) different from singlet oxygen, such as superoxide anion or superoxide radical, can be responsible for the second one. This second quenching process developed gradually after the initial contact of pSi photosensitizer with water and then degraded. The process lasted only several hours. Therefore, functionalization of the pSi photosensitizer is probably required to stabilize its PL and quenching properties in the watery physiological conditions required for biomedical applications.

  9. Quenching of porous silicon photoluminescence by molecular oxygen and dependence of this phenomenon on storing media and method of preparation of pSi photosensitizer

    Energy Technology Data Exchange (ETDEWEB)

    Balaguer, Maria, E-mail: mabara@itq.upv.e [Technical University of Valencia, Nanophotonics Technology Center (Spain); Matveeva, Eugenia, E-mail: eumat@em-silicon.co [EM-Silicon Nano-Technologies, S.L. (Spain)

    2010-10-15

    The quenching of porous silicon photoluminescence (pSi PL) by molecular oxygen has been studied in different storing media in an attempt to clarify the mechanism of the energy transfer from the silicon photosensitizer to the oxygen acceptor. Luminescent materials have been prepared by two methods: electrochemical anodizing and chemical etching. Different structural forms were used: porous layers on silicon wafer and two kinds of differently prepared powder. Dry air and liquid water were employed as storing media; quenching behaviour was under observation until total degradation of quenching properties. Singlet oxygen molecules generation through energy transfer from photoluminescent pSi was the only photosensitizing mechanism observed under dry gas conditions. This PL quenching process was preferentially developed at 760 nm (1.63 eV) that corresponds to the formation of the {sup 1{Sigma}} singlet oxygen state. Oxidation of the pSi photosensitizer was the main factor that led to its total deactivation in a time scale of few weeks. Regarding water medium, different photosensitizing behaviour was observed. In watery conditions, two preferred energy levels were found: the one detected in dry gas and another centred at approximately 2.2 eV (550 nm). Formation of reactive oxygen species (ROS) different from singlet oxygen, such as superoxide anion or superoxide radical, can be responsible for the second one. This second quenching process developed gradually after the initial contact of pSi photosensitizer with water and then degraded. The process lasted only several hours. Therefore, functionalization of the pSi photosensitizer is probably required to stabilize its PL and quenching properties in the watery physiological conditions required for biomedical applications.

  10. Media Training

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    With the LHC starting up soon, the world's media are again turning their attention to CERN. We're all likely to be called upon to explain what is happening at CERN to media, friends and neighbours. The seminar will be given by BBC television news journalists Liz Pike and Nadia Marchant, and will deal with the kind of questions we're likely to be confronted with through the restart period. The training is open for everybody. Make sure you arrive early enough to get a seat - there are only 200 seats in the Globe. The session will also be webcast: http://webcast.cern.ch/

  11. A novel method for determining the solubility of small molecules in aqueous media and polymer solvent systems using solution calorimetry.

    Science.gov (United States)

    Fadda, Hala M; Chen, Xin; Aburub, Aktham; Mishra, Dinesh; Pinal, Rodolfo

    2014-07-01

    To explore the application of solution calorimetry for measuring drug solubility in experimentally challenging situations while providing additional information on the physical properties of the solute material. A semi-adiabatic solution calorimeter was used to measure the heat of dissolution of prednisolone and chlorpropamide in aqueous solvents and of griseofulvin and ritonavir in viscous solutions containing polyvinylpyrrolidone and N-ethylpyrrolidone. Dissolution end point was clearly ascertained when heat generation stopped. The heat of solution was a linear function of dissolved mass for all drugs (solution of 9.8 ± 0.8, 28.8 ± 0.6, 45.7 ± 1.6 and 159.8 ± 20.1 J/g were obtained for griseofulvin, ritonavir, prednisolone and chlorpropamide, respectively. Saturation was identifiable by a plateau in the heat signal and the crossing of the two linear segments corresponds to the solubility limit. The solubilities of prednisolone and chlopropamide in water by the calorimetric method were 0.23 and 0.158 mg/mL, respectively, in agreement with the shake-flask/HPLC-UV determined values of 0.212 ± 0.013 and 0.169 ± 0.015 mg/mL, respectively. For the higher solubility and high viscosity systems of griseofulvin and ritonavir in NEP/PVP mixtures, respectively, solubility values of 65 and 594 mg/g, respectively, were obtained. Solution calorimetry offers a reliable method for measuring drug solubility in organic and aqueous solvents. The approach is complementary to the traditional shake-flask method, providing information on the solid properties of the solute. For highly viscous solutions, the calorimetric approach is advantageous.

  12. Convergence analysis of the nonlinear iterative method for two-phase flow in porous media associated with nanoparticle injection

    KAUST Repository

    El-Amin, Mohamed

    2017-08-29

    Purpose In this paper, we introduce modeling, numerical simulation, and convergence analysis of the problem nanoparticles transport carried by a two-phase flow in a porous medium. The model consists of equations of pressure, saturation, nanoparticles concentration, deposited nanoparticles concentration on the pore-walls, and entrapped nanoparticles concentration in pore-throats. Design/methodology/approach Nonlinear iterative IMPES-IMC (IMplicit Pressure Explicit Saturation–IMplicit Concentration) scheme is used to solve the problem under consideration. The governing equations are discretized using the cell-centered finite difference (CCFD) method. The pressure and saturation equations are coupled to calculate the pressure, then the saturation is updated explicitly. Therefore, the equations of nanoparticles concentration, the deposited nanoparticles concentration on the pore walls and the entrapped nanoparticles concentration in pore throats are computed implicitly. Then, the porosity and the permeability variations are updated. Findings We stated and proved three lemmas and one theorem for the convergence of the iterative method under the natural conditions and some continuity and boundedness assumptions. The theorem is proved by induction states that after a number of iterations the sequences of the dependent variables such as saturation and concentrations approach solutions on the next time step. Moreover, two numerical examples are introduced with convergence test in terms of Courant–Friedrichs–Lewy (CFL) condition and a relaxation factor. Dependent variables such as pressure, saturation, concentration, deposited concentrations, porosity and permeability are plotted as contours in graphs, while the error estimations are presented in table for different values of number of time steps, number of iterations and mesh size. Research limitations/implications The domain of the computations is relatively small however, it is straightforward to extend this method

  13. The study of redox mechanism of dobutamine at different pH media by electrochemical and in situ spectroelectrochemical methods

    International Nuclear Information System (INIS)

    Yang Gongjun; Xu Jingjuan; Chen Hongyuan

    2004-01-01

    Based on the comprehensive analyses of the experimental results of the electrochemical methods, in situ UV-Vis absorption spectra, in situ electron spin resonance (ESR), and attenuated total-internal reflection (ATR) as well as the calculation of UV-Vis absorption data by PM3 Semi-Empirical method, a reaction mechanism for the redox processes of dobutamine was presented. When the anodic sweep is carried out, dobutamine firstly undergoes a free radical reaction with one-electron and one-proton to form semi-quinone free radicals, which will continuously convert to its corresponding quinone form by further electrochemical oxidation reaction. The formed quinone cannot only undergo a cyclization process by chemical reaction to produce a new compound, which can be reduced at more negative potential, but also be reduced to form dobutamine again when subsequent cathodic sweep is followed. The cyclization rate is depended upon pH values, and it increases with the increase of pH. In neutral medium, the corresponding oxidation form of the cyclization reaction product is easy to convert to melanin

  14. Social Media Sites

    Science.gov (United States)

    Media Sites Site Registration Contact Us Search AF.mil: Home > AF Sites > Social Media Sites Social Media Welcome to the Air Force social media directory! The directory is a one-stop shop of official Air Force social media pages across various social media sites. Social media is all about

  15. “I Set the Camera on the Handle of My Dresser”: Re-Matter-Ializing Social Media Visual Methods through a Case Study of Selfies

    Directory of Open Access Journals (Sweden)

    Katie Warfield

    2017-12-01

    Full Text Available This article is a confession about research trouble and the start of a narrative of research rectification. I begin this article with a review of new materialist theory and methods broadly and specifically those that contribute insight into interviews and photo elicitation such as intra-views and posthuman visual methods. I then detail the research methodology I used for an empirical study conducted last year to look at what young women experience while taking selfies, or images of their face and body to be shared on social media. After this fairly procedural account, I return to my messy research notes and video recordings, and—rather than reread—I re-trace and re-matter-ialize one specific interview with one young woman using new materialist methods (intra-views and reading images horizontally to reveal data that would otherwise not have been evidenced via my original humanist methods. Re-matter-ializing describes my process as a researcher re-visiting not only the discursive moments, but the affective encounters and the matter of the research assemblage; meaning I move beyond the spoken data to look at how the material-discursive-afffective assemblage or arrangment of the interview room, technologies of data recording, props in the room, and embodied interactions of the participants were entangled in and vital agents in the production of data. In conclusion I detail the benefits of a posthuman re-tracing: 1 an attentiveness to the complex human and non-human agents in a research assemblage, 2 a response-ability or ethical duty of researchers to not reduce the complexity of the phenomena they study, 3 the importance of affect in the research encounter especially in visual methods, and, 4 a questioning of the implicit assumption that—of all steps in a research program—methodology is the least malleable.

  16. Contrast media

    International Nuclear Information System (INIS)

    Decazes, Ph.

    2004-01-01

    The Guerbet firm, which holds 69% of the capital on the contrast media for medical imagery, could sale about 20% of this capital in order to accelerate its development in the United States, one of its next market with the Japan. (O.M.)

  17. Otitis media

    NARCIS (Netherlands)

    Rovers, MM; Schilder, AGM; Zielhuis, GA; Rosenfeld, RM

    2004-01-01

    Otitis media (OM) continues to be one of the most common childhood infections and is a major cause of morbidity in children. The pathogenesis of OM is multifactorial, involving the adaptive and native immune system, Eustachian-tube dysfunction, viral and bacterial load, and genetic and environmental

  18. Social Media

    Science.gov (United States)

    2010-05-01

    Digital Marketing and Ecommerce Professionals. 29 January 2010. 20 May 2010. <http://econsultancy.com/blog/5324-20+-mind-blowing-social- media...Statistics Revisited.” Econsultancy | Community of Digital Marketing and Ecommerce Professionals. 29 Jan. 2010. 20 May 2010. <http://econsultancy.com/blog

  19. Streaming Media

    Science.gov (United States)

    Pulley, John

    2009-01-01

    At a time when the evolutionary pace of new media resembles the real-time mutation of certain microorganisms, the age-old question of how best to connect with constituents can seem impossibly complex--even for an elite institution plugged into the motherboard of Silicon Valley. Identifying the most effective vehicle for reaching a particular…

  20. Calculating qP-wave traveltimes in 2-D TTI media by high-order fast sweeping methods with a numerical quartic equation solver

    Science.gov (United States)

    Han, Song; Zhang, Wei; Zhang, Jie

    2017-09-01

    A fast sweeping method (FSM) determines the first arrival traveltimes of seismic waves by sweeping the velocity model in different directions meanwhile applying a local solver. It is an efficient way to numerically solve Hamilton-Jacobi equations for traveltime calculations. In this study, we develop an improved FSM to calculate the first arrival traveltimes of quasi-P (qP) waves in 2-D tilted transversely isotropic (TTI) media. A local solver utilizes the coupled slowness surface of qP and quasi-SV (qSV) waves to form a quartic equation, and solve it numerically to obtain possible traveltimes of qP-wave. The proposed quartic solver utilizes Fermat's principle to limit the range of the possible solution, then uses the bisection procedure to efficiently determine the real roots. With causality enforced during sweepings, our FSM converges fast in a few iterations, and the exact number depending on the complexity of the velocity model. To improve the accuracy, we employ high-order finite difference schemes and derive the second-order formulae. There is no weak anisotropy assumption, and no approximation is made to the complex slowness surface of qP-wave. In comparison to the traveltimes calculated by a horizontal slowness shooting method, the validity and accuracy of our FSM is demonstrated.

  1. A method for studying the development pattern of urban commercial service facilities based on customer reviews from social media

    Science.gov (United States)

    Wang, Y. D.; Jiang, B. T.; Ye, X. Y.

    2016-06-01

    Urbanization is one of the most important human social activities in the 21st century (Chaolin et al., 2012). With an increasing number of people visiting cities, the provision of adequate urban service facilities, including public and commercial service facilities, in locations where people live has become an important guarantee of the success of urbanization. Exploring the commercial service facilities in a specific area of a city can help us understand the progress and trends of urban renewal in the area, provide a quantitative basis for evaluating the rationality of planning implementation, and facilitate an analysis of the effects of different factors on the regional development of a city (Schor et al. 2003). In this paper, we proposed a data processing and analysis method for studying the distribution and development pattern of urban commercial facilities based on customer reviews. In addition, based on road network constraints, we explored the patterns contained in customer reviews data, including patterns for the spatial distribution and spatial-temporal evolution of facilities as well as the number of facilities and degree of satisfaction.

  2. A method for studying the development pattern of urban commercial service facilities based on customer reviews from social media

    Directory of Open Access Journals (Sweden)

    Y. D. Wang

    2016-06-01

    Full Text Available Urbanization is one of the most important human social activities in the 21st century (Chaolin et al., 2012. With an increasing number of people visiting cities, the provision of adequate urban service facilities, including public and commercial service facilities, in locations where people live has become an important guarantee of the success of urbanization. Exploring the commercial service facilities in a specific area of a city can help us understand the progress and trends of urban renewal in the area, provide a quantitative basis for evaluating the rationality of planning implementation, and facilitate an analysis of the effects of different factors on the regional development of a city (Schor et al. 2003. In this paper, we proposed a data processing and analysis method for studying the distribution and development pattern of urban commercial facilities based on customer reviews. In addition, based on road network constraints, we explored the patterns contained in customer reviews data, including patterns for the spatial distribution and spatial-temporal evolution of facilities as well as the number of facilities and degree of satisfaction.

  3. Two media method for linear attenuation coefficient determination of irregular soil samples; Metodo dos dois meios para a determinacao do coeficiente de atenuacao linear de amostras irregulares de solos

    Energy Technology Data Exchange (ETDEWEB)

    Vici, Carlos Henrique Georges

    2004-07-01

    In several situations of nuclear applications, the knowledge of gamma-ray linear attenuation coefficient for irregular samples is necessary, such as in soil physics and geology. This work presents the validation of a methodology for the determination of the linear attenuation coefficient ({mu}) of irregular shape samples, in such a way that it is not necessary to know the thickness of the considered sample. With this methodology irregular soil samples (undeformed field samples) from Londrina region, north of Parana were studied. It was employed the two media method for the {mu} determination. It consists of the {mu} determination through the measurement of a gamma-ray beam attenuation by the sample sequentially immersed in two different media, with known and appropriately chosen attenuation coefficients. For comparison, the theoretical value of {mu} was calculated by the product of the mass attenuation coefficient, obtained by the WinXcom code, and the measured value of the density sample. This software employs the chemical composition of the samples and supplies a table of the mass attenuation coefficients versus the photon energy. To verify the validity of the two media method, compared with the simple gamma ray transmission method, regular pome stone samples were used. With these results for the attenuation coefficients and their respective deviations, it was possible to compare the two methods. In this way we concluded that the two media method is a good tool for the determination of the linear attenuation coefficient of irregular materials, particularly in the study of soils samples. (author)

  4. Kesadaran Kritis Mahasiswa Terhadap Media Sosial (Studi Deskriptif Kualitatif Literasi Media Tentang Kesadaran Kritis Mahasiswa Ilmu Komunikasi USU Terhadap Media Sosial)

    OpenAIRE

    Nurhaliza, Ade

    2017-01-01

    This study entitled “Critical Awareness of Communication Student in Social Media”. This study aimed to find out how student’s critical awareness in social media in media literacy context. The Theories used in this study are media literacy theory, critical awareness theory, new media and digital media literacy, and social media. The method used in this study is qualitative descriptive which describes the condition on the ground, reality, and the situation or some phenomenones. The result showe...

  5. A posteriori estimator and adaptive mesh refinement for finite volume finite element method for monophasic flow and solute transport in porous media

    International Nuclear Information System (INIS)

    Amor, H.; Bourgeois, M.

    2012-01-01

    Document available in extended abstract form only. The disposal of high level, long lived waste in deep underground clay formations is investigated by several countries including France. In the safety assessment of such geological repositories, a thoughtful consideration must be given to the mechanisms and possible pathways of migration of radionuclides released from waste packages. However, when modelling the transfer of radionuclides throughout the disposal facilities and geological formations, the numerical simulations must take into consideration, in addition to long durations of concern, the variety in the properties as well as in geometrical scales of the different components of the overall disposal, including the host formation. This task presents significant computational challenges. Numerical methods used in the MELODIE software The MELODIE software is developed by IRSN, and constantly upgraded, with the aim to assess the long-term containment capabilities of underground and surface radioactive waste repositories. The MELODIE software models water flow and the phenomena involved in the transport of radionuclides in saturated and unsaturated porous media in 2 and 3 dimensions; chemical processes are represented by a retardation factor and a solubility limit, for sorption and solubility respectively, integrated in the computational equations. These equations are discretized using a so-called Finite Volume Finite Element method (FVFE), which is based on a Galerkin method to discretize time and variables, together with a Finite Volume method using the Godunov scheme for the convection term. The FVFE method is used to convert partial differential equations into a finite number of algebraic equations that match the number of nodes in the mesh used to model the considered domain. It is also used to stabilise the numerical scheme. In order to manage the variety in properties and geometrical scales of underground disposal components, an a posteriori error estimator

  6. Contemplative Media Studies

    Directory of Open Access Journals (Sweden)

    Kevin Healey

    2015-08-01

    Full Text Available The psychological and socio-economic implications of digital technologies call for scholarship that engages questions about the nature of human consciousness, the construction of the self and the ethics of technical development. In this article, I outline a framework for an approach called contemplative media studies. This approach incorporates several different scholarly threads, namely: via critical political-economic media scholarship, a focus on achieving social and economic justice through policy initiatives and structural reform; via media and religious scholarship, an interest in the religious dimensions of digital culture and the role of media in shaping religious identity; and via contemplative studies, an appreciation of the applicability of contemplative principles to research methods and theory. This framework allows us to examine the spiritual ideology that drives the construction of commercial digital platforms and to ask whether alternative platforms might better catalyze human development. Anchored in a critical commitment to socio-economic justice, contemplative media studies is aimed at articulating an ethically-responsive and economically-sustainable architecture of human flourishing.

  7. [Chronic otitis mediaChronic Otitis Media].

    Science.gov (United States)

    Kohles, N; Schulz, T; Eßer, D

    2015-11-01

    There are 2 different kinds of chronic otitis media: Otitis media chronica mesotympanalis and otitis media chronica epitympanalis (cholesteatoma). The incidence of chronic otitis media as reported in literature differs in a wide range. The incidence rates vary between 0.45 and 46%. Both, otitis media chronica mesotympanalis and cholesteatoma, lead to eardrum perforation due to lengthy and recurring inflammations. Furthermore, chronic otitis media is characterized by frequently recurring otorrhea and conductive hearing loss. Georg Thieme Verlag KG Stuttgart · New York.

  8. Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

    International Nuclear Information System (INIS)

    Chiem, Kok Siong; Zhao Yong

    2004-01-01

    In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics

  9. Bulk derivatization and cation exchange restricted access media-based trap-and-elute liquid chromatography–mass spectrometry method for determination of trace estrogens in serum

    International Nuclear Information System (INIS)

    Beinhauer, Jana; Bian, Liangqiao; Fan, Hui; Šebela, Marek; Kukula, Maciej; Barrera, Jose A.

    2015-01-01

    Highlights: • Analysis of estrogens in small volume samples at low parts-per-trillion concentration. • Charged bulk derivatization facilitates on-line ion exchange sample preparation. • On-line WCX restricted access media traps analytes, but not proteins and lipids. • Complete preparation and LC–MS/MS analysis completed in 30 min/sample. - Abstract: Estrone (E1), estradiols (α/β-E2), and estriol (E3) are four major metabolically active estrogens exerting strong biological activities at very low circulating concentrations. This paper reports a sensitive and efficient method with automated, on-line clean-up and detection to determine trace estrogens in a small volume of serum samples using liquid chromatography–electrospray ionization–tandem mass spectrometry directly, without off-line liquid–liquid or solid-phase extraction pretreatments. Serum aliquots (charcoal stripped fetal bovine serum, 100 μL) were spiked with four estrogen standards and their corresponding isotope-labeled internal standards, then bulk derivatized with 2-fluoro-1-methyl-pyridium p-toluenesulfonate (2-FMP) to establish the calibration curves and perform method validation. Calibration was established in the concentration ranges of 5–1000 pg mL −1 , and demonstrated good linearity of R 2 from 0.9944 to 0.9997 for the four derivatized estrogens. The lower detection limits obtained were 3–7 pg mL −1 . Good accuracy and precision in the range of 86–112% and 2.3–11.9%, respectively, were observed for the quality control (QC) samples at low, medium, and high concentration levels. The stability tests showed that the derivatized serum samples were stable 8 h after derivatization at room temperature and at least to 48 h if stored at −20 °C. The method was applied to measure trace estrogens in real human and bovine serum samples, and three of four estrogen compounds studied were observed and quantified

  10. A fluorescence-based method for cyanate analysis in ethanol/water media: correlation between cyanate presence and ethyl carbamate formation in sugar cane spirit.

    Science.gov (United States)

    Ohe, Thiago Hideyuki Kobe; da Silva, Alexandre Ataide; Rocha, Thaís da Silva; de Godoy, Flávio Schutzer; Franco, Douglas Wagner

    2014-10-01

    Based on the fluorescence properties of 2,4-(1H,3H)-quinazolinedione, a product of the reaction between cyanate and 2-aminobenzoic acid, a simple, sensitive, selective, and reproducible method for the cyanate analysis in aqueous ethanolic media is proposed. In this method, λ(exc) and λ(em) are 310 and 410 nm, respectively, and the limits of detection and quantification are 2.2 × 10(-7) and 6.7 × 10(-7) mol/L, respectively. Under optimal conditions (pH = 4.5, 40% ethanol), a concentration of 5.0 × 10(-6) mol/L cyanate can be determined in a single measurement, at a 95% level of confidence, with an uncertainty of ± 0.13 × 10(-6) mol/L. Cyanide, thiocyanate, chloride, nitrate, and sulfate ions, as well as urea and urethane in concentrations 1 × 10(3) higher than that of cyanate do not interfere with the measurement. The methodology was applied to cyanate analyses in the different fractions of the sugarcane distillate and the data strongly suggest a correlation between the presence of urea in wine, and the cyanate and ethyl carbamate concentrations in the spirit. Based on the fluorescence properties of the reaction product between cyanate and 2-aminobenzoic acid, a method for assaying cyanate was devised. This procedure applied to the sugarcane distillate showed for the first time a correlation between cyanate presence and ethyl carbamate (EC) formation in the different fractions of the product. Therefore, the proposed methodology can be used to predict in freshly distillate sugar cane spirits the potential total concentration of EC to be formed. Therefore, these data could be used to advise about the necessity of implementing a procedure to reduce spirit EC concentration before the product reaches the market. © 2014 Institute of Food Technologists®

  11. On Media Education

    Science.gov (United States)

    Fedorov, Alexander

    2008-01-01

    This monograph analyzes the theory and practice of media education and media literacy. The book also includes the list of Russian media education literature and addresses of websites of the associations for media education.

  12. Otitis media.

    Science.gov (United States)

    Schilder, Anne G M; Chonmaitree, Tasnee; Cripps, Allan W; Rosenfeld, Richard M; Casselbrant, Margaretha L; Haggard, Mark P; Venekamp, Roderick P

    2016-09-08

    Otitis media (OM) or middle ear inflammation is a spectrum of diseases, including acute otitis media (AOM), otitis media with effusion (OME; 'glue ear') and chronic suppurative otitis media (CSOM). OM is among the most common diseases in young children worldwide. Although OM may resolve spontaneously without complications, it can be associated with hearing loss and life-long sequelae. In developing countries, CSOM is a leading cause of hearing loss. OM can be of bacterial or viral origin; during 'colds', viruses can ascend through the Eustachian tube to the middle ear and pave the way for bacterial otopathogens that reside in the nasopharynx. Diagnosis depends on typical signs and symptoms, such as acute ear pain and bulging of the tympanic membrane (eardrum) for AOM and hearing loss for OME; diagnostic modalities include (pneumatic) otoscopy, tympanometry and audiometry. Symptomatic management of ear pain and fever is the mainstay of AOM treatment, reserving antibiotics for children with severe, persistent or recurrent infections. Management of OME largely consists of watchful waiting, with ventilation (tympanostomy) tubes primarily for children with chronic effusions and hearing loss, developmental delays or learning difficulties. The role of hearing aids to alleviate symptoms of hearing loss in the management of OME needs further study. Insertion of ventilation tubes and adenoidectomy are common operations for recurrent AOM to prevent recurrences, but their effectiveness is still debated. Despite reports of a decline in the incidence of OM over the past decade, attributed to the implementation of clinical guidelines that promote accurate diagnosis and judicious use of antibiotics and to pneumococcal conjugate vaccination, OM continues to be a leading cause for medical consultation, antibiotic prescription and surgery in high-income countries.

  13. One-dimensional solution of the transport equation in porous media in transient state by a new numerical method for the management of particle track

    Science.gov (United States)

    Delay, F.; de Marsily, G.; Carlier, E.

    1994-10-01

    For the last fifteen years or so, the random-walk methods have proved their worth in solving the transport equation in porous and fractured media. Their principal shortcomings remain their relatively slow calculation speed and their lack of precision at low concentrations. This paper proposes a new code which eliminates these disadvantages by managing the particles not individually but in the form of numerical values (representing the number of particles in each phase, mobile and immobile) assigned to each cell in a 1-D system. The calculation time then is short, and it is possible to introduce as many particles as desired into the model without increasing the calculation time. A large number of injection types can be simulated, and to the classical convection-dispersion phenomenon can be added a process of exchange between the mobile and immobile phase according to first-order kinetics. Because the particles are managed as numbers, the analytical solution obtained for the exchange during a time step reduces the calculation to a simple assignation of numerical values to two variables, one of which represents the mobile and the other the immobile phase; the calculation is then almost instantaneous. Because the program is developed in C, it leaves much room for graphic interaction which greatly facilitates the fitting of tracer experiments with a limited set of parameters.

  14. Media matters.

    Science.gov (United States)

    Martinez, L M

    1995-01-01

    The impact of the mass media on woman's status was addressed at two 1995 conferences: the Fourth World Conference on Women, held in Beijing, China, and the Congress of the World Association for Christian Communication, held in Puebla, Mexico. The globalization process facilitated by the mass media has served to increase the power of patriarchy, with no advantages to the cause of women's rights. Coverage of popular movements has been suppressed out of deference to male-controlled governments. Coverage of the Beijing Conference highlighted celebrities and personal stories, to the exclusion of the economic and political issues under debate. Television has commodified women, reinforcing their oppression. On the other hand, the alternative media, which tend to be decentralized, democratic, low-cost, and low in technology, are presenting women as subjects rather than objects and deconstructing gender stereotypes. Of concern, however, is the tendency of computer technology to widen the gap between social classes and developed and developing countries. Women must use information networks to disseminate information on women's rights and strengthen the links between women throughout the world.

  15. Media Education Initiatives by Media Organizations: The Uses of Media Literacy in Hong Kong Media

    Science.gov (United States)

    Chu, Donna; Lee, Alice Y. L.

    2014-01-01

    As more media organizations have engaged in media education, this paper investigates the goals and practices of these activities. This article coins media education initiatives by media organizations with the term "media-organization media literac"y (MOML). Four MOML projects in Hong Kong were selected for examination. Built on critical…

  16. A two-dimensional hybrid method for modeling seismic waves propagation in laterally-varying anisotropic media and its application to central Tibet

    Science.gov (United States)

    Zhao, L.; Wen, L.

    2009-12-01

    The shear wave splitting measurements provide important information on mantle flow, deformation and mineralogy. They are now routinely made using the method developed by Silver and Chan (1994). More and more dense regional observations also begin to reveal sharp spatial variations of seismic anisotropy which could not be explained by simplified horizontal homogeneous anisotropic structures. To better constrain the mantle anisotropy beneath those regions, we developed a two-dimensional hybrid method for simulating seismic wave propagation in laterally-varying anisotropic media [Zhao et al., 2008]. In this presentation, we apply the method to study anisotropic structures beneath central Tibet by waveform modeling the teleseismic SKS phases recorded in the International Deep Profiling of Tibet and the Himalayas project (INDEPTH) III. Using data from two events that were selected such that the stations and sources can be approximated as a two-dimensional profile, we derived an optimal model for the anisotropic structures of the upper mantle beneath the study region: a 50-70 km thick anisotropic layer with a fast direction trending N95°E beneath the Qiangtang block, a 150 km thick and 60 km wide anisotropic segment with an axis trending N95°E beneath the northernmost Lhasa block, and a ~30 km wide transition zone in between within which the fast direction trends N45°E and the depth extent of anisotropy decreases northward sharply. Synthetic waveform modeling further suggests that an anisotropic model with a horizontal symmetry axis can explain the observations better than that with a dipping symmetry, and a low velocity zone possibly underlies or mixes with the anisotropic structures in the northern portion of the region. The optimal model yields synthetic seismograms that are in good agreement with the observations in both amplitudes and relative arrival times of SKS phases. Synthetic tests also indicate that different elastic constants, source parameters and depth

  17. The two-phase flow IPTT method for measurement of nonwetting-wetting liquid interfacial areas at higher nonwetting saturations in natural porous media.

    Science.gov (United States)

    Zhong, Hua; Ouni, Asma El; Lin, Dan; Wang, Bingguo; Brusseau, Mark L

    2016-07-01

    Interfacial areas between nonwetting-wetting (NW-W) liquids in natural porous media were measured using a modified version of the interfacial partitioning tracer test (IPTT) method that employed simultaneous two-phase flow conditions, which allowed measurement at NW saturations higher than trapped residual saturation. Measurements were conducted over a range of saturations for a well-sorted quartz sand under three wetting scenarios of primary drainage (PD), secondary imbibition (SI), and secondary drainage (SD). Limited sets of experiments were also conducted for a model glass-bead medium and for a soil. The measured interfacial areas were compared to interfacial areas measured using the standard IPTT method for liquid-liquid systems, which employs residual NW saturations. In addition, the theoretical maximum interfacial areas estimated from the measured data are compared to specific solid surface areas measured with the N 2 /BET method and estimated based on geometrical calculations for smooth spheres. Interfacial areas increase linearly with decreasing water saturation over the range of saturations employed. The maximum interfacial areas determined for the glass beads, which have no surface roughness, are 32±4 and 36±5 cm -1 for PD and SI cycles, respectively. The values are similar to the geometric specific solid surface area (31±2 cm -1 ) and the N 2 /BET solid surface area (28±2 cm -1 ). The maximum interfacial areas are 274±38, 235±27, and 581±160 cm -1 for the sand for PD, SI, and SD cycles, respectively, and ~7625 cm -1 for the soil for PD and SI. The maximum interfacial areas for the sand and soil are significantly larger than the estimated smooth-sphere specific solid surface areas (107±8 cm -1 and 152±8 cm -1 , respectively), but much smaller than the N 2 /BET solid surface area (1387±92 cm -1 and 55224 cm -1 , respectively). The NW-W interfacial areas measured with the two-phase flow method compare well to values measured using the standard

  18. Autowaves in moving excitable media

    Directory of Open Access Journals (Sweden)

    V.A.Davydov

    2004-01-01

    Full Text Available Within the framework of kinematic theory of autowaves we suggest a method for analytic description of stationary autowave structures appearing at the boundary between the moving and fixed excitable media. The front breakdown phenomenon is predicted for such structures. Autowave refraction and, particulary, one-side "total reflection" at the boundary is considered. The obtained analytical results are confirmed by computer simulations. Prospects of the proposed method for further studies of autowave dynamics in the moving excitable media are discussed.

  19. New media technologies and mass media reform processes

    Directory of Open Access Journals (Sweden)

    Tomić Boban

    2017-01-01

    Full Text Available This paper reviews and assesses the chances for survival and development of the media in Serbia and ib the region, from the perspective of new information and communication technologies (ICT applied in media business. In the paper theoretical method is used and harmonized with the needs of describing the problems and the observed processes and phenomena, as well as empirical method which is used for collecting and interpreting concrete facts and data on the observed processes and phenomena. The starting point lies in the fact that modern media is definitely, more and more, dependent on new technologies. A part of the new technologies is used in the process of collecting, selecting and editing media content, while the other part of the technology is used in the process of dissemination and propulsion of media content to the mass audience, and also in the feedback function as well. The technology revolution, which we describe, started with mp3, jpg and avi files, and continues with internet broadcasting, social networks, cloud technologies and new digital platforms which are used by today's media for distribution of media content. The particularity of the media in the region lies in the fact that they operating in the societes with delay of political and economic transition, so all the productive resources of society, due to this backlog, are slower adapted to the new conditions of business in the digital era. The consequences that have arisen from such dynamics of development make many media in Serbia and the region quite dysfunctional, especially those who were exposed during this transition to long-standing legal, economic and program crises. That is why most of the existing media in Serbia, especially small ones, are unprepared for modernization and they are not ready for re-modeling in accordance with the new technological circumstances.

  20. Social Media for Knowledge Management

    DEFF Research Database (Denmark)

    Dyrby, Signe

    2013-01-01

    of social media as a tool for knowledge management presents an interesting addition to existing knowledge management initiatives. In this research in progress paper, social media for knowledge management is explored through investigating the research question, how can social media influence knowledge...... and show multiple opportunities and challenges for adopting these initiatives into organizational practices. In recent years social media technologies have entered the organizational spheres with the objective of connecting people and enabling them to share and build knowledge. The application and use...... management practices in organizations? The investigation builds on a theoretical reflection of the concepts of knowledge management practices and social media. The method for the theoretical investigation is based in the outline of core literature perspectives dealing with knowledge management practices...

  1. Media Matter

    Directory of Open Access Journals (Sweden)

    Holger Pötzsch

    2017-02-01

    Full Text Available The present contribution maps materialist advances in media studies. Based on the assumption that matter and materiality constitute significant aspects of communication processes and practices, I introduce four fields of inquiry - technology, political economy, ecology, and the body - and argue that these perspectives enable a more comprehensive understanding of the implications of contemporary technologically afforded forms of interaction. The article shows how each perspective can balance apologetic and apocalyptic approaches to the impact of in particular digital technologies, before it demonstrates the applicability of an integrated framework with reference to the techno-politics of NSA surveillance and the counter-practices of WikiLeaks.

  2. Media education and media influence on youth

    OpenAIRE

    LILÁK, Karel

    2011-01-01

    Bachelor´s work is focused on the questions of the medial education and the medias themselves. This work also investigate with the influence of the action of medias to the students of apprenticeship. The first part of the theoretical work has generally explains what is media education, what is its significance for society and for the benefit of education in school. They are given functions, types and objectives of media education and communications capabilities via the media. The second part ...

  3. Journalism Practice and Social Media

    Directory of Open Access Journals (Sweden)

    Hanifi KURT

    2014-12-01

    Full Text Available Social media applications which have been emerging with the spread of developing internet technology, have deeply transformed all variants of the phenomenon of the communication, including mass communication. Social media has transformed phenomenon of communication into an accelerant and interactive format that can be contributed continuously; while, mass media carries the information which is designed from a certain center (newsrooms to masses conventionally. It can be expressed that social media applications, corresponding to the different forms of interactive communication, such as internet forums, weblogs, social blogs, wikis, photo/video/text sharing applications/websites, have also created significant changes in the field of journalism. This new (social media which provides readers to participate in the news texts actively, even provides the opportunity to every ordinary person (who has an internet connection for being a citizen journalist, is not only a new source of news for journalists, but it is also seen as a new reporting enviroment that provides possibility for making profession of journalism in an interactive format. This study aims to examine the social media usage habits of journalists and their relation with social media. The journalists who work for local and national media organizations located in İzmir, are determined as a sample of this study and the questionnaire/survey method is chosen for to achieve specific data for the aim of the study

  4. Bulk derivatization and cation exchange restricted access media-based trap-and-elute liquid chromatography–mass spectrometry method for determination of trace estrogens in serum

    Energy Technology Data Exchange (ETDEWEB)

    Beinhauer, Jana [Department of Biochemistry, Faculty of Science, Palacký University, Šlechtitelů 11, CZ-783 71 Olomouc (Czech Republic); Centre of the Region Haná for Biotechnological and Agricultural Research - Department of Protein Biochemistry and Proteomics, Faculty of Science, Palacký University, Šlechtitelů 11, CZ-783 71 Olomouc (Czech Republic); Bian, Liangqiao [Shimadzu Center for Advanced Analytical Chemistry, The University of Texas at Arlington, Arlington, TX (United States); Shimadzu Institute for Research Technologies, The University of Texas at Arlington, Arlington, TX (United States); Fan, Hui [Department of Chemistry and Biochemistry, The University of Texas at Arlington, Arlington, TX (United States); Šebela, Marek [Department of Biochemistry, Faculty of Science, Palacký University, Šlechtitelů 11, CZ-783 71 Olomouc (Czech Republic); Centre of the Region Haná for Biotechnological and Agricultural Research - Department of Protein Biochemistry and Proteomics, Faculty of Science, Palacký University, Šlechtitelů 11, CZ-783 71 Olomouc (Czech Republic); Kukula, Maciej [Shimadzu Center for Advanced Analytical Chemistry, The University of Texas at Arlington, Arlington, TX (United States); Shimadzu Institute for Research Technologies, The University of Texas at Arlington, Arlington, TX (United States); Barrera, Jose A. [Shimadzu Institute for Research Technologies, The University of Texas at Arlington, Arlington, TX (United States); and others

    2015-02-09

    Highlights: • Analysis of estrogens in small volume samples at low parts-per-trillion concentration. • Charged bulk derivatization facilitates on-line ion exchange sample preparation. • On-line WCX restricted access media traps analytes, but not proteins and lipids. • Complete preparation and LC–MS/MS analysis completed in 30 min/sample. - Abstract: Estrone (E1), estradiols (α/β-E2), and estriol (E3) are four major metabolically active estrogens exerting strong biological activities at very low circulating concentrations. This paper reports a sensitive and efficient method with automated, on-line clean-up and detection to determine trace estrogens in a small volume of serum samples using liquid chromatography–electrospray ionization–tandem mass spectrometry directly, without off-line liquid–liquid or solid-phase extraction pretreatments. Serum aliquots (charcoal stripped fetal bovine serum, 100 μL) were spiked with four estrogen standards and their corresponding isotope-labeled internal standards, then bulk derivatized with 2-fluoro-1-methyl-pyridium p-toluenesulfonate (2-FMP) to establish the calibration curves and perform method validation. Calibration was established in the concentration ranges of 5–1000 pg mL{sup −1}, and demonstrated good linearity of R{sup 2} from 0.9944 to 0.9997 for the four derivatized estrogens. The lower detection limits obtained were 3–7 pg mL{sup −1}. Good accuracy and precision in the range of 86–112% and 2.3–11.9%, respectively, were observed for the quality control (QC) samples at low, medium, and high concentration levels. The stability tests showed that the derivatized serum samples were stable 8 h after derivatization at room temperature and at least to 48 h if stored at −20 °C. The method was applied to measure trace estrogens in real human and bovine serum samples, and three of four estrogen compounds studied were observed and quantified.

  5. Study by acoustic emission and electrochemical methods of the corrosion and the protection of the copper-zinc alloy (60/40) in neutral and alkaline media

    International Nuclear Information System (INIS)

    Assouli, B.

    2002-12-01

    The aim of this work is to study and characterize, by electrochemical methods and acoustic emission, the corrosion and the protection of the copper-zinc alloy (60/40) having a metallographic structure αβ'. The electrochemical measurements, in neutral, chlorinated or alkaline medium have allowed, to study the corrosion resistance of the copper-zinc and to show that the corrosion of this alloy, in the used media, is determined by a diffusional mechanism. The observations to the optical and scanning electron microscopes and the EDX analyzes have confirmed that this corrosion phenomenon is mainly due to the selective dissolution of the β' phase. The acoustic emission has shown, during this corrosion, the presence of two emissive sources whose initiation has been attributed to the relaxation of the micro- and macro- residual stresses of the α phase. These stresses have been characterized by X-ray diffraction and the salvoes emitted during the relaxation of these stresses have been discriminated by the characteristic frequencies and by the barycenter of their spectral density. The protection of this alloy has been carried out by the 2-mercapto-benzimidazole (MBI). This last compound has been tested both as inhibitor added directly in the corrosive medium and/or as polymer film previously deposited by an electrochemical way (p-MBI). The MBI is very efficient for an inhibition in a chlorinated alkaline medium. It is an interphase inhibitor. The p-MBI is efficient too in a neutral chlorinated medium and is moreover non pollutant for the environment. (O.M.)

  6. Homogenization of discrete media

    Energy Technology Data Exchange (ETDEWEB)

    Pradel, F.; Sab, K. [CERAM-ENPC, Marne-la-Vallee (France)

    1998-11-01

    Material such as granular media, beam assembly are easily seen as discrete media. They look like geometrical points linked together thanks to energetic expressions. Our purpose is to extend discrete kinematics to the one of an equivalent continuous material. First we explain how we build the localisation tool for periodic materials according to estimated continuum medium type (classical Cauchy, and Cosserat media). Once the bridge built between discrete and continuum media, we exhibit its application over two bidimensional beam assembly structures : the honey comb and a structural reinforced variation. The new behavior is then applied for the simple plan shear problem in a Cosserat continuum and compared with the real discrete solution. By the mean of this example, we establish the agreement of our new model with real structures. The exposed method has a longer range than mechanics and can be applied to every discrete problems like electromagnetism in which relationship between geometrical points can be summed up by an energetic function. (orig.) 7 refs.

  7. Michael Faraday, media man.

    Science.gov (United States)

    Fara, Patricia

    2006-03-01

    Michael Faraday was an enthusiastic portrait collector, and he welcomed the invention of photography not only as a possible means of recording observations accurately, but also as a method for advertising science and its practitioners. This article (which is part of the Science in the Industrial Revolution series) shows that like many eminent scientists, Faraday took advantage of the burgeoning Victorian media industry by posing in various roles.

  8. Managing Media: Segmenting Media Through Consumer Expectancies

    Directory of Open Access Journals (Sweden)

    Matt Eastin

    2014-04-01

    Full Text Available It has long been understood that consumers are motivated to media differently. However, given the lack of comparative model analysis, this assumption is without empirical validation, and thus, the orientation of segmentation from a media management perspective is without motivational grounds. Thus, evolving the literature on media consumption, the current study develops and compares models of media segmentation within the context of use. From this study, six models of media expectancies were constructed so that motivational differences between media (i.e., local and national newspapers, network and cable television, radio, and Internet could be observed. Utilizing higher order statistical analyses the data indicates differences across a model comparison approach for media motivations. Furthermore, these differences vary across numerous demographic factors. Results afford theoretical advancement within the literature of consumer media consumption as well as provide media planners’ insight into consumer choices.

  9. THE LATENT INTERCONNECTION OF THE FACTORS OF ATHEROSCLEROSIS PROGRESSION WITH A THICKNESS OF INTIMA-MEDIA BY USE OF MULTIDIMENSIONAL STATISTICAL METHODS ANALYSIS

    Directory of Open Access Journals (Sweden)

    A. P. Shavrin

    2011-01-01

    Full Text Available The aim – the study of latent relationships between indicators of the thickness of intima-media (CMM and infectious, immune, inflammatory and metabolic factors in patients with varying degrees of severity of vascular changes in these multivariate methods of statistical analysis.Materials and methods. Study included 220 patients (mean age – 43,9 ± 0,5 years who were divided into 3 groups. Group 1 consisted of thepatients with no risk factors of cardiovascular disease (CVD, the 2nd – the presence of the above factors, in third – with atherosclerotic plaques in the carotid artery. Every patient had conducted a comprehensive survey, which included an ultrasound of vessels on the apparatus Aloka 5000 with the measurement of the thickness of KIM, the study of lipid panel, the definition of C-reactive protein and cytokines – tumor necrosis factor-α, interferon-γ, interleukin-1, -8, -4, antibodies to cytomegalovirus immunoglobulin (CMV, herpes simplex virus type 1, C. pneumoniae, H. pylori and β-hemolytic streptococcus group A. The immune system status was assessed by indicators of innate and acquired immunity.Results. According to cluster analysis, all groups of patients revealed the presence of close relationships with linear thickness KIM, infectious, immune and metabolic markers, and in patients with atherosclerotic plaques in blood vessels links with indicators of inflammation are additionally found. Using factor analysis latent variables exist revealed, consisting of indices and thickness of the CMM, in group 1 – blood lipids, in the 2nd – infectious factors (CMV, C. pneumoniae and immune parameters. In the 3rd group vascular wall was linked with infectious diseases, immune and inflammatory indices and blood lipids, and systolic and diastolic blood pressure.Conclusion. The closest relationship with vascular wall of the studied parameters was observed in patients with risk factors of cardiovasculardisease, and in the

  10. Geographic Media Literacy

    Science.gov (United States)

    Lukinbeal, Chris

    2014-01-01

    While the use of media permeates geographic research and pedagogic practice, the underlying literacies that link geography and media remain uncharted. This article argues that geographic media literacy incorporates visual literacy, information technology literacy, information literacy, and media literacy. Geographic media literacy is the ability…

  11. Adolescents and media literacy.

    Science.gov (United States)

    McCannon, Robert

    2005-06-01

    In the face of media industry consolidation, fewer people control media content which makes it harder for parents and citizens to know the research about media-related issues, such as video game violence, nutrition, and sexual risk-taking. Media literacy offers a popular and potentially successful way to counter the misinformation that is spread by Big Media public relations.

  12. Safety in online media – freedom of the media; safety of media actors and media education

    OpenAIRE

    Moeller, Ch

    2013-01-01

    In this paper, prepared for the international conference ‘Mass Media – Society – Education: Media Safety Problems’ at the Chelyabinsk State University’s Department for Journalism and Media Education from September 30 – October 3, 2013, I would like to address three dimensions of media safety and security in online media.

  13. SOCIAL MEDIA SECURITY

    Science.gov (United States)

    RESPONSIBILITY CENTCOM COALITION MEDIA SOCIAL MEDIA NEWS ARTICLES PRESS RELEASES IMAGERY VIDEOS TRANSCRIPTS VISITORS AND PERSONNEL FAMILY CENTER FAMILY READINESS CENTCOM WEBMAIL SOCIAL MEDIA SECURITY ACCOUNTABILITY HomeVISITORS AND PERSONNELSOCIAL MEDIA SECURITY FAQ on Security for Social Media Due to the widespread use of

  14. Measuring News Media Literacy

    Science.gov (United States)

    Maksl, Adam; Ashley, Seth; Craft, Stephanie

    2015-01-01

    News media literacy refers to the knowledge and motivations needed to identify and engage with journalism. This study measured levels of news media literacy among 500 teenagers using a new scale measure based on Potter's model of media literacy and adapted to news media specifically. The adapted model posits that news media literate individuals…

  15. Media Literacy in Times of Media Divides

    Directory of Open Access Journals (Sweden)

    Kaja Žuran

    2013-12-01

    Full Text Available We live in a post-modern society, an information society, a society based around knowledge and participation, and above all in a media society. In a media culture where media holds a dominant position, we cannot overlook the emerging idea of a ‘media divide’ within the frame of media education, media literate individuals and the expansion of the traditional concept of media literacy. Firstly, we are in an era of technological revolution, and it is time to consider the meaning and function of media and how we experience it in our everyday life. Secondly, as a society we are subject to intense media invasion and we all need to learn how to use it to our benefit and apply a critical and autonomous perspective towards selecting media content. Otherwise the media divide between the media literate and illiterate will widen; but is there even a chance to overcome the supposed divide between those who are formally media educated and those who are not?

  16. Tunable diode laser absorption spectroscopy as method of choice for non-invasive and automated detection of microbial growth in media fills.

    Science.gov (United States)

    Brueckner, David; Roesti, David; Zuber, Ulrich; Sacher, Meik; Duncan, Derek; Krähenbühl, Stephan; Braissant, Olivier

    2017-05-15

    Tunable diode laser absorption spectroscopy (TDLAS) was evaluated on its potential to detect bacterial growth of contaminated media fill vials. The target was a replacement/ automation of the traditional visual media fill inspection. TDLAS was used to determine non-invasively O 2 and/or CO 2 changes in headspaces of such vials being induced by metabolically active microorganisms. Four different vial formats, 34 microorganisms (inoculation volume<10 cells) and two different media (TSB/FTM) were tested. Applying parallel CO 2 and O 2 headspace measurements all format-organism combinations were detected within <11 days reliably with reproducible results. False negatives were exclusively observed for samples that were intentionally breached with syringes of 0.3mm in diameter. Overall it was shown that TDLAS functionality for a replacement of the visual media fill inspection is given and that investing in further validation and implementation studies is valuable. Nevertheless, some small but vincible challenges remain to have this technology in practical use. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Regulation in the media-internet-telecom value web : Introducing the Damian method for systematic analysis of the interdependencies between services, organisations and regulation

    NARCIS (Netherlands)

    Nooren, P.A.; Koers, W.A.; Bangma, M.R.; Berkers, F.T.H.M.; Boertjes, E.M.

    2014-01-01

    The convergence between media, internet and telecoms has brought many new services, devices and distribution models. The availability of multiple routes for delivery of services to end users helps to remove a number of traditional bottlenecks. At the same time, new bottlenecks can appear as the

  18. Social education of youth with mass media

    OpenAIRE

    Ryazanova A.; Zakirova A.

    2017-01-01

    This article reveals the influence of mass media; the concepts of education, the distinctive influence and different types, methods and mechanisms of mass media. The object of the study is the social education of young people. The subject is the synthesis of social educator’s work with the youth using the mass media. The aim of the work is to analyze the social educator’s work. Methods: theoretical analysis of literature, work’s synthesis of the specialist.

  19. Otitis media with effusion

    Science.gov (United States)

    OME; Secretory otitis media; Serous otitis media; Silent otitis media; Silent ear infection; Glue ear ... from the tube and is swallowed. OME and ear infections are connected in two ways: After most ear ...

  20. Panel 7: Otitis Media: Treatment and Complications.

    Science.gov (United States)

    Schilder, Anne G M; Marom, Tal; Bhutta, Mahmood F; Casselbrant, Margaretha L; Coates, Harvey; Gisselsson-Solén, Marie; Hall, Amanda J; Marchisio, Paola; Ruohola, Aino; Venekamp, Roderick P; Mandel, Ellen M

    2017-04-01

    Objective We aimed to summarize key articles published between 2011 and 2015 on the treatment of (recurrent) acute otitis media, otitis media with effusion, tympanostomy tube otorrhea, chronic suppurative otitis media and complications of otitis media, and their implications for clinical practice. Data Sources PubMed, Ovid Medline, the Cochrane Library, and Clinical Evidence (BMJ Publishing). Review Methods All types of articles related to otitis media treatment and complications between June 2011 and March 2015 were identified. A total of 1122 potential related articles were reviewed by the panel members; 118 relevant articles were ultimately included in this summary. Conclusions Recent literature and guidelines emphasize accurate diagnosis of acute otitis media and optimal management of ear pain. Watchful waiting is optional in mild to moderate acute otitis media; antibiotics do shorten symptoms and duration of middle ear effusion. The additive benefit of adenoidectomy to tympanostomy tubes in recurrent acute otitis media and otitis media with effusion is controversial and age dependent. Topical antibiotic is the treatment of choice in acute tube otorrhea. Symptomatic hearing loss due to persistent otitis media with effusion is best treated with tympanostomy tubes. Novel molecular and biomaterial treatments as adjuvants to surgical closure of eardrum perforations seem promising. There is insufficient evidence to support the use of complementary and alternative treatments. Implications for Practice Emphasis on accurate diagnosis of otitis media, in its various forms, is important to reduce overdiagnosis, overtreatment, and antibiotic resistance. Children at risk for otitis media and its complications deserve special attention.

  1. Examining Media Literacy Levels of Prospective Teachers

    Directory of Open Access Journals (Sweden)

    Taskın INAN

    2012-04-01

    Full Text Available As in many other countries, following the 2007-2008 education year when media literacy courses began to be included in the curricula, media literacy has become one of the discussion topics among educators and decision makers in Turkey. Discussion topics related to media literacy have included who is going to give the media literacy courses, what qualifications will be sought out in media literacy education teachers, what will be included in the media literacy curriculum in terms of its content, and at what level the media literacy course will be given. The current study which aims to examine media literacy levels of prospective teachers utilized thesurvey method. The sample of the study included prospective teachers (480 attending Elementary School Education, Social Studies Education and Turkish Language Education departments in the Education Faculty at the Dumlupinar University in the 2008-2009 education year. The results of the study showed that prospective teachers have a low level of reaction to media messages, do not educate people around enough about the effects of media, but make use of different sources of media to gain information, and are cognizant of media literacy.

  2. Examining media literacy levels of prospective teachers

    Directory of Open Access Journals (Sweden)

    Taşkın İnan

    2012-03-01

    Full Text Available As in many other countries, following the 2007-2008 education year when media literacy courses began to be included in the curricula, media literacy has become one of the discussion topics among educators and decision makers in Turkey. Discussion topics related to media literacy have included who is going to give the media literacy courses, what qualifications will be sought out in media literacy education teachers, what will be included in the media literacy curriculum in terms of its content, and at what level the media literacy course will be given. The current study which aims to examine media literacy levels of prospective teachers utilized the survey method. The sample of the study included prospective teachers (480 attending Elementary School Education, Social Studies Education and Turkish Language Education departments in the Education Faculty at the Dumlupinar University in the 2008-2009 education year. The results of the study showed that prospective teachers have a low level of reaction to media messages, do not educate people around enough about the effects of media, but make use of different sources of media to gain information, and are cognizant of media literacy.

  3. Intermediality and media change

    OpenAIRE

    2012-01-01

    This book is about intermediality as an approach to analysing and understanding media change. Intermediality and Media Change is critical of technological determinism that characterises 'new media discourse' about the ongoing digitalization, framed as a revolution and creating sharp contrasts between old and new media. Intermediality instead emphasises paying attention to continuities between media of all types and privileges a comparative perspective on technological changes in media over ti...

  4. Media Pembelajaran Global Warming

    OpenAIRE

    Tham, Fikri Jufri; Liliana, Liliana; Purba, Kristo Radion

    2016-01-01

    Computer based learning media is one of the media has an important role in learning. Learning media will be attractive when packaged through interactive media , such as interactive media created in paper manufacture " instructional media global warming" . The advantage gained is that it can increase knowledge, generally educate people to be more concerned about the environment , and also can be a means of entertainment. This application is focused to learn about global warming and packaged in...

  5. Social media management and media environment

    Directory of Open Access Journals (Sweden)

    Šiđanin Iva

    2012-01-01

    Full Text Available The paper deals with the system of services that social media management can offer to a variety of users. As social media systems are emerging, social media management can strengthen teams in social media and help to manage numerous social channels and distribution of social information from one place. Social media management is a system of procedures that are used to manage the flow of information in the environment of social media. This involves connecting with social media like Facebook, Twitter, LinkedIn, Plaxo, Ecademy, YouTube and many others, then the aggregation and management of social data. Social media management services are analysed through various fields, such as managing multiple social media profiles, mail scheduling and filtering, reporting and analytics. Social media management enables managing personal business through social media, which contributes to a significant reduction in expenditures. The paper also discusses the importance of social media management in marketing activities and various forms of social promotion, which allow companies to easily reach their customers.

  6. Gas-liquid Relative Permeability Estimation in 2D Porous Media by Lattice Boltzmann Method: Low Viscosity Ratio 2D LBM Relative Permeability

    Directory of Open Access Journals (Sweden)

    Sadegh Mahmoudi

    2013-04-01

    Full Text Available This work is a primary achievement in studying the CO2 and N2–oil systems. To predict gas-liquid relative permeability curves, a Shan-Chen type multicomponent multiphase lattice Boltzmann model for two-phase flow through 2D porous media is developed. Periodic and bounce back boundary conditions are applied to the model with the Guo scheme for the external body force (i.e., the pressure gradient. The influence of relationship between cohesion and adsorption parameters and the interfacial tension values in Young's equation, pore structure (micro scan image derived porous media response is compared with corresponding porosity and permeability ideal sphere pack structure, and saturation distribution on relative permeability curves are studied with the aim to achieve the realistic stable condition for the simulation of gas-liquid systems with a low viscosity ratio.

  7. Social Media Ecology in Distributed Workplaces

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2011-01-01

    In this position paper, we discuss about methods currently adopted for research- ing the use of social media in distributed workplace. We have extensively reviewed previ- ous empirical studies through an ongoing Systematic Mapping Study focused on the use of social media in distributed teams; from...... the review, we realized that research is mainly per- formed through a mix of qualitative and quantitative methods and that each study usually fo- cuses on one specific kind social media at a time. We believe that the social media ecology should be researched as a whole and in relationship with the physical...

  8. Bedroom media: One risk factor for development.

    Science.gov (United States)

    Gentile, Douglas A; Berch, Olivia N; Choo, Hyekyung; Khoo, Angeline; Walsh, David A

    2017-12-01

    Mass media have numerous effects on children, ranging from influencing school performance to increased or reduced aggression. What we do not know, however, is how media availability in the bedroom moderates these effects. Although several researchers have suggested that bedroom media may influence outcomes by displacing other activities (the displacement hypothesis) or by changing the content of media consumed (the content hypothesis), these have rarely been tested directly. This study tested both hypotheses using several outcomes that are associated with bedroom media and some of the underlying mediating mechanisms. The hypotheses were tested using 3 longitudinal samples of varying methods, age, duration, and country. The results indicate that children who have bedroom media are likely to watch larger amounts of screen time which displaced important activities, such as reading and sleeping, which mediated later negative outcomes such as poor school performance. Bedroom media also influence risk for obesity and video game addiction. Children with bedroom media are also likely to be exposed to more media violence. The violent content increased normative beliefs about aggression, which increased physical aggression, providing support for the content hypothesis. This study demonstrates that media can have effects not just from what they show, but also because of what children are not exposed to. Bedroom media are therefore a robust risk factor for several aspects of child development. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  9. Media Literacy Bibliography.

    Science.gov (United States)

    Duncan, Barry

    1989-01-01

    Provides an up-to-date bibliography of resources available for teaching media literacy. Groups resources into the areas of media education methodology, mass media texts, general background, television, film, the news and medium of print, advertising, gender and the media, popular culture, popular music and rock video, periodicals, and…

  10. Understanding Social Media Logic

    OpenAIRE

    José van Dijck; Thomas Poell

    2013-01-01

    Over the past decade, social media platforms have penetrated deeply into the mech­anics of everyday life, affecting people's informal interactions, as well as institutional structures and professional routines. Far from being neutral platforms for everyone, social media have changed the conditions and rules of social interaction. In this article, we examine the intricate dynamic between social media platforms, mass media, users, and social institutions by calling attention to social media log...

  11. Social media influencer marketing

    OpenAIRE

    Isosuo, Heli

    2016-01-01

    The marketing field is changing simultaneously with the digital world. Social media is getting more and more important to marketers, and there is a need to stand out in the social media noise. Social media influencer marketing could be a good alternative to other types of marketing. A need from the consignor and the interest of the author were the motivations for conducting the study. Sääskilahti Consulting has a social media influencer network Somevaikuttajat, which is offering social media ...

  12. Teachers’ ability in using math learning media

    Science.gov (United States)

    Masniladevi; Prahmana, R. C. I.; Helsa, Y.; Dalais, M.

    2017-12-01

    The studies aim to enhance teachers’ knowledge and skill in making math instructional media, develop math instructional media, train and assist the use of instructional media in learning math in the classroom. The method used in the activities adopted the pattern of preventive implementation, planning stage, program implementation, observation and evaluation and reflection. The research results show that the evaluation of teachers’ ability is still in average category. The result required more intensive training.

  13. Social Media Management Strategies for Organizational Impression Management and their Effect on Public Perception

    OpenAIRE

    Benthaus, Janek; Risius, Marten; Beck, Roman

    2016-01-01

    With the growing importance of social media, companies increasingly rely on social media management tools to analyze social media activities and to professionalize their social media engagement. In this study, we evaluate how social media management tools, as part of an overarching social media strategy, help companies to positively influence the public perception among social media users. A mixed methods approach is applied, where we quantitatively analyze 15 million user-generated Twitter m...

  14. Acute Otitis Media in Children.

    Science.gov (United States)

    Leung, Alexander K C; Wong, Alex H C

    2017-01-01

    Acute otitis media is a common childhood infection. Prompt diagnosis and appropriate treatment are very important. To review in depth the epidemiology, pathophysiology, clinical manifestations, diagnosis, complications and particularly treatment of acute otitis media in children. A PubMed search was completed in Clinical Queries using the key term "acute otitis media". Patents were searched using the key term "acute otitis media" from www.google.com/patents, http://espacenet.com, and www.freepatentsonline.com. Acute otitis media affects over 80% of children before their third birthday and 30 to 45% of these children have suffered two or more episodes. Streptococcus pneumoniae, nontypable Haemophilus influenzae, and Moraxella catarrhalis are the most frequently isolated middle-ear pathogens. The diagnosis is based on acute onset of symptoms such as otalgia and fever, middle ear inflammation such as erythema of the tympanic membrane, and middle ear effusion. The choice of treatment method depends on the age of the child, laterality, and the severity of the disease. Recent patents related to the management of acute otitis media are also retrieved and discussed. Antimicrobial treatment is recommended for all children less than two years of age, as well as in children ≥ two years of age who have a temperature ≥ 39oC; are toxic looking; have otalgia > 48 hours; have bilateral otitis media or otorrhea; have craniofacial abnormalities; are immunocompromised; or have uncertain access to follow-up. Amoxicillin is the drug of choice. Observation without antibiotic is an option in immunocompetent children ≥ two years of age who have an acute uncomplicated otitis media and non-severe illness if appropriate follow-up can be arranged. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  15. How young people describe the impact of living with and beyond a cancer diagnosis: feasibility of using social media as a research method.

    Science.gov (United States)

    Gibson, F; Hibbins, S; Grew, T; Morgan, S; Pearce, S; Stark, D; Fern, L A

    2016-11-01

    Young people with cancer exhibit unique needs. During a time of normal physical and psychological change, multiple disease and treatment-related symptoms cause short and long-term physical and psychosocial effects. Little is known about how young people cope with the impact of cancer and its treatment on daily routines and their strategies to manage the challenges of cancer and treatments. We aimed to determine how young people describe these challenges through a social media site. Using the principles of virtual ethnography and watching videos on a social media site we gathered data from young people describing their cancer experience. Qualitative content analysis was employed to analyse and interpret the narrative from longitudinal 'video diaries' by 18 young people equating to 156 films and 27 h and 49 min of recording. Themes were described then organized and clustered into typologies grouping commonalities across themes. Four typologies emerged reflective of the cancer trajectory: treatment and relenting side effects, rehabilitation and getting on with life, relapse, facing more treatment and coming to terms with dying. This study confirms the need for young people to strive towards normality and creating a new normal, even where uncertainty prevailed. Strategies young people used to gain mastery over their illness and the types of stories they choose to tell provide the focus of the main narrative. Social Media sites can be examined as a source of data, to supplement or instead of more traditional routes of data collection known to be practically challenging with this population. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  16. Wave propagation in electromagnetic media

    CERN Document Server

    Davis, Julian L

    1990-01-01

    This is the second work of a set of two volumes on the phenomena of wave propagation in nonreacting and reacting media. The first, entitled Wave Propagation in Solids and Fluids (published by Springer-Verlag in 1988), deals with wave phenomena in nonreacting media (solids and fluids). This book is concerned with wave propagation in reacting media-specifically, in electro­ magnetic materials. Since these volumes were designed to be relatively self­ contained, we have taken the liberty of adapting some of the pertinent material, especially in the theory of hyperbolic partial differential equations (concerned with electromagnetic wave propagation), variational methods, and Hamilton-Jacobi theory, to the phenomena of electromagnetic waves. The purpose of this volume is similar to that of the first, except that here we are dealing with electromagnetic waves. We attempt to present a clear and systematic account of the mathematical methods of wave phenomena in electromagnetic materials that will be readily accessi...

  17. Media violence in the information society in the context of media anthropology

    Directory of Open Access Journals (Sweden)

    N. A. Mazorenko

    2014-01-01

    Full Text Available The article discusses media violence as special case of deviant manifestations of the individual and collective social body. It’s stated that in the late 20th century emphasis had shifted from the sociological and ethnographic works towards a more wide format of a man and the media studies. According to the author, it was caused by the forming of the media anthropology as human­oriented paradigm of the postmodern media. The place of media violence in problematic field of the media anthropology field is defined. It’s considered as a result of the somatic transformations in the media and the cultural space of the information society. Mass media have been products of culture and social life and at the same time factors of the identity’s construction. Such characteristic properties require more conscious of morality and responsibility. Media need to understand and represent new modes of physicality / spirituality and rationality / irrationality in the media and socio­political life. Due to weakening or decline of spiritual and intellectual component in the psycho­somatic existence threatens to turn society into collective grotesque body, and media that exploit these social strain, into media spectacle, distorted and grotesque in the worst sense of the word. In this article, the method of anthropological reduction, and elements of cultural­historical and structural­functional analysis have been used.

  18. The development of a method for the simultaneous measurement of cerium (IV) and chromium (VI) species in nitric acid media - 16124

    International Nuclear Information System (INIS)

    Nickson, Ian D.; Boxall, Colin; Jackson, Angela; Whillock, Guy O.H.

    2009-01-01

    The corrosion of stainless steel in nitric acid media is a major concern for the nuclear industry. Several reprocessing schemes such as PUREX (Plutonium Uranium Reduction Extraction) and UREX (Uranium Reduction Extraction) utilise nitric acid media, and an understanding of the behaviour of key chemical species in these process streams is vital if their effect on associated corrosion reactions and their rates is to be accurately assessed and quantified. This will allow for more accurate prediction of the working lifetime of any stainless steel surface in contact with the process stream in question. Two such key species that are found in nuclear process streams are cerium as Ce (IV) and chromium as Cr(VI), both of which may act as corrosion accelerants. The redox chemistry of cerium and chromium in highly active liquor (HAL) will depend on nitrous acid concentration, temperature, acidity, total nitrate and possibly the influence of other dissolved species and hence an analytical technique for the on-line measurement of these quantities would be useful for lifetime prediction and corrosion prevention. As a result of this, a strategy for the simultaneous measurement of both Ce(IV) and Cr(VI) species in the presence of other ions typically found in process streams (such as Iron, Magnesium Neodymium and Aluminium) has been developed. The work presented will discuss the design and implementation of the electrochemical techniques that we have used in the development of this strategy and in the measurement of the species in question. (authors)

  19. Computed tomography in diagnostics of effluent otitis media

    International Nuclear Information System (INIS)

    Imomova, L.S.; Norboev, Z.; Kalandarov, S.Ch.

    2011-01-01

    This article is devoted to computed tomography in diagnostics of effluent otitis media. The purpose of present work is to assess the possibilities of computed tomography method of temporal bone in the diagnostics of otitis media.

  20. Impediments to Media Communication of Social Change in Family ...

    African Journals Online (AJOL)

    AJRH Managing Editor

    media's and consumers' aspirations. (Afr J Reprod Health 2013; 17[3]: ... Keywords: Family Planning, Journalists, Behaviour Change Communication. Introduction ... method approaches, community involvement, as well as building media ...

  1. Unpacking New Media Literacy

    Directory of Open Access Journals (Sweden)

    Der-Thanq “victor” Chen

    2011-04-01

    Full Text Available The 21st century has marked an unprecedented advancement of new media. New media has become so pervasive that it has penetrated into every aspect of our society. New media literacy plays an essential role for any citizen to participate fully in the 21st century society. Researchers have documented that literacy has evolved historically from classic literacy (reading-writing-understanding to audiovisual literacy to digital literacy or information literacy and recently to new media literacy. A review of literature on media literacy reveals that there is a lack of thorough analysis of unique characteristics of new media and its impacts upon the notion of new media literacy. The purpose of the study is to unpack new media literacy and propose a framework for a systematic investigation of new media literacy.

  2. Parenting and Digital Media.

    Science.gov (United States)

    Coyne, Sarah M; Radesky, Jenny; Collier, Kevin M; Gentile, Douglas A; Linder, Jennifer Ruh; Nathanson, Amy I; Rasmussen, Eric E; Reich, Stephanie M; Rogers, Jean

    2017-11-01

    Understanding the family dynamic surrounding media use is crucial to our understanding of media effects, policy development, and the targeting of individuals and families for interventions to benefit child health and development. The Families, Parenting, and Media Workgroup reviewed the relevant research from the past few decades. We find that child characteristics, the parent-child relationship, parental mediation practices, and parents' own use of media all can influence children's media use, their attitudes regarding media, and the effects of media on children. However, gaps remain. First, more research is needed on best practices of parental mediation for both traditional and new media. Ideally, this research will involve large-scale, longitudinal studies that manage children from infancy to adulthood. Second, we need to better understand the relationship between parent media use and child media use and specifically how media may interfere with or strengthen parent-child relationships. Finally, longitudinal research on how developmental processes and individual child characteristics influence the intersection between media and family life is needed. The majority of children's media use takes place within a wider family dynamic. An understanding of this dynamic is crucial to understanding child media use as a whole. Copyright © 2017 by the American Academy of Pediatrics.

  3. Media Watch

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    EXPRESS BOOM Southern Metropolis Weekly January 24,2011 The express delivery industry in China has gone through explosive development in recent years as e-commerce rapidly develops and the volume of online shopping, which requires this delivery method,drastically increases.However,the requirement of starting a business in this industry is still very low.Problems of the emerging industry were revealed to the public recently and

  4. Modelling of Emulsion Flow in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Kassem, J.H. [UAE University (United Arab Emirates); Farouq Ali, S.M. [UAE University (United Arab Emirates)

    1995-06-01

    Oil recovery methods predominantly involve emulsion formation. Oil recovery simulation requires the incorporation of emulsion characteristics and flow in porous media, in order to optimize oil recovery from petroleum reservoirs. This paper explored the nature and rheology of emulsions, and evaluated several models of flow of Newtonian and non-Newtonian fluids in porous media. It also summarized in situ emulsion formation in porous media. A model for both Newtonian and non-Newtonian emulsion fluid flow was proposed, with special emphasis on pore size, and tortuosity in the porous media.

  5. Mass Media: The Invisible Environment.

    Science.gov (United States)

    Glessing, Robert J.; White, William P.

    This anthology for students of media consists of essays and articles grouped under four topics: media forms, media content, media environments, and "the last word." Media forms deals with the nature of these kinds of media: electronic, print, film, music, and comics, graffiti, and clothing. Media content contains articles on the news, advertising,…

  6. Media Pluralism and Diversity

    DEFF Research Database (Denmark)

    In the western world, a diverse and pluralistic media landscape is deemed essential for democracy. But how universal is media pluralism as a concept underpinning media policies? To what extent do normative approaches, regulatory dimensions and monitoring systems differ throughout the world......? Adopting a truly global, theoretical and multidisciplinary perspective, Media Pluralism and Diversity advances our understanding of media pluralism across the globe. It compares metrics developed in different parts of the world to assess levels of, or threats to, media pluralism. It identifies common...

  7. Social Media Reputation

    DEFF Research Database (Denmark)

    Etter, Michael Andreas; Ravasi, Davide; Colleoni, Elanor

    motivational drivers and contextual conditions associated with the formation of narratives in traditional news media and social media influence their content, diffusion, and impact significantly. Our analysis suggests that current theories of media reputation may provide an incomplete representation......Social media enable millions of users to create and disseminate narratives about organizations that increase their public exposure and shape public perceptions. In this paper, we draw on the sociology of news production and research on computer-mediated communication to discuss how different...... of the phenomenon, and highlight theoretically relevant differences and interrelationships between reputational dynamics involving news media and social media....

  8. Social Media Strategies and Destination Management

    DEFF Research Database (Denmark)

    Munar, Ana Maria

    2012-01-01

    This study provides insights into social media practices and strategic considerations used by destination management organizations (DMOs). It examines a theoretical model of generic social media strategies for destination management and applies qualitative methods to analyze the social media...... initiatives of DMOs of Denmark, Norway, Finland, Sweden and the Scandinavian Tourist Board Asia/Pacific in the Nordic European Region. The study provides empirical evidence of emerging social media strategies among DMOs and confirms the growing importance of these new media. The findings point...... to the conflicting relationship between corporate culture and social media culture, the challenges innovative communication tools present for traditional management structures, poor levels of formalization and the lack of a knowledge base which results in ad-hoc decision making. Overall, the paper discusses...

  9. Social media use in nursing education.

    Science.gov (United States)

    Schmitt, Terri L; Sims-Giddens, Susan S; Booth, Richard G

    2012-09-30

    As technological advances continue to expand connectivity and communication, the number of patients and nurses engaging in social media increases. Nurses play a significant role in identification, interpretation, and transmission of knowledge and information within healthcare. Social media is a platform that can assist nursing faculty in helping students to gain greater understanding of and/or skills in professional communication; health policy; patient privacy and ethics; and writing competencies. Although there are barriers to integration of social media within nursing education, there are quality resources available to assist faculty to integrate social media as a viable pedagogical method. This article discusses the background and significance of social media tools as pedagogy, and provides a brief review of literature. To assist nurse educators who may be using or considering social media tools, the article offers selected examples of sound and pedagogically functional use in course and program applications; consideration of privacy concerns and advantages and disadvantages; and tips for success.

  10. Urgency Competence of Media Literacy for Archivist

    Directory of Open Access Journals (Sweden)

    Agus Santoso

    2016-07-01

    Full Text Available The study of media literacy has been conducted by the earlier scientists. That research uses population that have different characteristics to each other. So this studies of media literacy have various models or patterns. This models or patterns of media literacies will be used as basic data to the next study that generated will usually be the basis for the further research. Basically, the model of media literacy generated by some researchers only can be applied in the population which become objects of research. To day, the archives faced many challenges due to the presence of information technology, so that the competence of media literacy as one of the important competencies to have. Through this competency, archivist are expected to manage archives organization effectively and efficiently. This paper uses a descriptive method to describe how media literacy becomes important for archives.

  11. Cross-media communication in context

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette; Lomborg, Stine

    2016-01-01

    In this article, we suggest and discuss a qualitative, multi-methods approach to data collected on smartphones as a way of uncovering a user-centred perspective on cross-media communication. As an individualised multimedia device, the smartphone represents a relevant starting point for studying......-media communication....

  12. AMAMM - All Media Are Mixed Media

    DEFF Research Database (Denmark)

    All Media Are Mixed Media Alle medier er blandingsmedier. Alle kunstarter er kompositte. Alle sanser er sammensatte. Alle medialiteter er miksede og mangfoldige. Alle er AMAMM. Denne påstand står centralt i ord-, billed- og medie-teoretikeren W.J.T. Mitchells forfatterskab. I hosstående bog tager...

  13. A Method for Selective Depletion of Zn(II) Ions from Complex Biological Media and Evaluation of Cellular Consequences of Zn(II) Deficiency

    Science.gov (United States)

    Richardson, Christopher E. R.; Cunden, Lisa S.; Butty, Vincent L.; Nolan, Elizabeth M.; Lippard, Stephen J.; Shoulders, Matthew D.

    2018-01-01

    We describe the preparation, evaluation, and application of an S100A12 protein-conjugated solid support, hereafter the “A12-resin,” that can remove 99% of Zn(II) from complex biological solutions without significantly perturbing the concentrations of other metal ions. The A12-resin can be applied to selectively deplete Zn(II) from diverse tissue culture media and from other biological fluids, including human serum. To further demonstrate the utility of this approach, we investigated metabolic, transcriptomic, and metallomic responses of HEK293 cells cultured in medium depleted of Zn(II) using S100A12. The resulting data provide insight into how cells respond to acute Zn(II) deficiency. We expect that the A12-resin will facilitate interrogation of disrupted Zn(II) homeostasis in biological settings, uncovering novel roles for Zn(II) in biology. PMID:29334734

  14. Catholic Media and Youth.

    Science.gov (United States)

    Nunes, Stephen A.

    1980-01-01

    Discusses the impact of media on youth and suggests some possible directions for the Catholic media, especially in the areas of textbooks, magazines, television, movies, and radio, in responding to the needs of youth. (Author/FM)

  15. Nurses and social media.

    Science.gov (United States)

    Farrelly, Rory

    Nurses' use of social media and other electronic communications has increased significantly with growing numbers of social media opportunities, platforms and applications including blogs, social networking sites, video sites and online chat rooms and forums.

  16. Media and Crime

    DEFF Research Database (Denmark)

    Agger, Gunhild; Waade, Anne Marit

    2011-01-01

    Recent developments in the relationship between media and crime are analyzed, taking both fiction and journalism in account......Recent developments in the relationship between media and crime are analyzed, taking both fiction and journalism in account...

  17. Development of contrast media

    International Nuclear Information System (INIS)

    Krause, W.

    1993-01-01

    Description of all contrast media (ionic and nonionic monomers, ionic and nonionic dimers) was presented. Chemotoxicity, osmolality and viscosity of some contrast agents were analyzed. The main adverse reactions to ionic and nonionic contrast media were described

  18. The social media revolution.

    Science.gov (United States)

    Dubose, Cheryl

    2011-01-01

    The growing popularity and use of social media tools such as Facebook, YouTube, Twitter, blogging, and wikis have led to a social media revolution. Given this widespread influence, it is important for educators, administrators, and technologists to understand the risks of using social media in the classroom and workplace. To investigate popular social media sites and their effect on radiologic technology education and business practices. A comprehensive search of literature was performed to examine social media and its applications in education, health care, and business. Social media use is on the rise, affecting all aspects of mainstream society. Leaders in the radiologic sciences should be familiar with social media and cognizant of its risks. Future studies regarding social media use in the radiologic sciences are necessary to determine its effect on the radiologic science community. ©2011 by the American Society of Radiologic Technologists.

  19. MODERN MEDIA EDUCATION MODELS

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2011-03-01

    Full Text Available The author supposed that media education models can be divided into the following groups:- educational-information models (the study of the theory, history, language of media culture, etc., based on the cultural, aesthetic, semiotic, socio-cultural theories of media education;- educational-ethical models (the study of moral, religions, philosophical problems relying on the ethic, religious, ideological, ecological, protectionist theories of media education;- pragmatic models (practical media technology training, based on the uses and gratifications and ‘practical’ theories of media education;- aesthetical models (aimed above all at the development of the artistic taste and enriching the skills of analysis of the best media culture examples. Relies on the aesthetical (art and cultural studies theory; - socio-cultural models (socio-cultural development of a creative personality as to the perception, imagination, visual memory, interpretation analysis, autonomic critical thinking, relying on the cultural studies, semiotic, ethic models of media education.

  20. Asian Media Productions

    DEFF Research Database (Denmark)

    This work consists of 12 essays on different aspects of Asian media by Japanese, European, and American scholars, many of whom have themselves been involved in the production of media forms. Working in the fields of anthropology, media and cultural studies, and on the basis of hands-on research, ......, they have written a book on the social practices and cultural attitudes of people producing, reading, watching and listening to different kinds of media in Japan, China, Taiwan, Indonesia, Vietnam, Singapore and India....

  1. Advertising on social media

    OpenAIRE

    Sumit Goyal

    2013-01-01

    This communication reports the latest trends of advertising on social media. Social media advertising means to gain traffic or attention of online users through social media sites. Today, when a user thinks about buying something, he first comes to the internet, searches for that product, compares its price with other competing brands and takes a decision, which one to buy. In this write-up, author has discussed many aspects concerning advertising through social media, viz., what is social me...

  2. Fast light in atomic media

    International Nuclear Information System (INIS)

    Akulshin, Alexander M; McLean, Russell J

    2010-01-01

    Atomic media have played a major role in studies of fast light. One of their attractive features is the ability to manipulate experimental parameters to control the dispersive properties that determine the group velocity of a propagating light pulse. We give an overview of the experimental methods, based on both linear and nonlinear atom–light interaction, that have produced superluminal propagation in atomic media, and discuss some of the significant theoretical contributions to the issues of pulse preservation and reconciling faster-than-light propagation and the principle of causality. The comparison of storage of light, enhanced Kerr nonlinearity and efficient wave mixing processes in slow and fast light atomic media illustrates their common and distinct features. (review article)

  3. Gas transport in porous media

    CERN Document Server

    Ho, Clifford K

    2006-01-01

    This book presents a compilation of state-of-the art studies on gas and vapor transport processes in porous and fractured media. A broad set of models and processes are presented, including advection/diffusion, the Dusty Gas Model, enhanced vapor diffusion, phase change, coupled processes, solid/vapor sorption, and vapor-pressure lowering. Numerous applications are also presented that illustrate these processes and models in current problems facing the scientific community. This book fills a gap in the general area of transport in porous and fractured media; an area that has historically been dominated by studies of liquid-phase flow and transport. This book identifies gas and vapor transport processes that may be important or dominant in various applications, and it exploits recent advances in computational modeling and experimental methods to present studies that distinguish the relative importance of various mechanisms of transport in complex media.

  4. Media Education: Sociology Surveys

    Science.gov (United States)

    Fedorov, Alexander

    2007-01-01

    In Russia as well as in foreign countries we can witness sort of the confusion of the terms of "media education" and "media literacy". There are quite a few differences in theoretical approaches to media education, to distinguishing of the most important aims, objectives, means of introduction into the teaching process, etc.…

  5. Modern Media Education Models

    Science.gov (United States)

    Fedorov, Alexander

    2011-01-01

    The author supposed that media education models can be divided into the following groups: (1) educational-information models (the study of the theory, history, language of media culture, etc.), based on the cultural, aesthetic, semiotic, socio-cultural theories of media education; (2) educational-ethical models (the study of moral, religions,…

  6. Open Media Science

    DEFF Research Database (Denmark)

    Martiny, Kristian Møller Moltke; Pedersen, David Budtz; Hansted, Alfred Birkegaard

    2016-01-01

    and extend into a fully-fledged Open Media movement engaging with new media and non-traditional formats of science communication. We discuss two cases where experiments with open media have driven new collaborations between scientists and documentarists. We use the cases to illustrate different advantages...

  7. Children's Media Policy

    Science.gov (United States)

    Jordan, Amy B.

    2008-01-01

    Amy Jordan addresses the need to balance the media industry's potentially important contributions to the healthy development of America's children against the consequences of excessive and age-inappropriate media exposure. Much of the philosophical tension regarding how much say the government should have about media content and delivery stems…

  8. Social Media Empowerment (I)

    NARCIS (Netherlands)

    A. Cox

    2011-01-01

    full text via link. Social media stellen mensen, merken en bedrijven in staat om zichzelf te versterken. Soms wordt optimaal gebruik gemaakt van Social Media Empowerment, maar soms ook wat minder. Effectief inzetten van social media. Regel 1: Start met context en motivatie

  9. Youth media lifestyles

    NARCIS (Netherlands)

    van Kruistum, Claudia; Leseman, Paul Pm; de Haan, Mariëtte

    2014-01-01

    In this article, the concept of "media lifestyles" is adopted in order to develop a comprehensive approach toward youth engagement in communication media. We explore how 503 Dutch eighth grade students with full access to new technology combine a broad range of media by focusing on their engagement

  10. Sizing Up Social Media

    Science.gov (United States)

    Pearson, Jerold

    2010-01-01

    Most people are aware of the increasing importance of social media to institutional advancement, and many colleges and universities have started investing resources in these media. The next step is to measure the impact of social media on the institution and evaluate the success of one's efforts. Every advancement leader should understand how…

  11. The Media Reader.

    Science.gov (United States)

    Valdes, Joan; Crow, Jeanne

    An anthology of readings in the media correlates chapter-by-chapter to the authors' textbook, "The Media Works." Fifteen chapters cover the study of newspapers, magazines, comics, popular music, television, movies, and advertising. The authors included represent varied perspectives on the media. The selections were chosen with the help of a…

  12. Media and child development

    NARCIS (Netherlands)

    Piotrowski, J.T.; Vossen, H.G.M.; Valkenburg, P.M.; Wright, J.D.

    2015-01-01

    Decades of research have shown that the relationship between media and childhood is not unidirectional but reciprocal. In this article, both directions of the media-child development relationship are presented. We discuss how child development predisposes children's media use and preferences by

  13. Media Education: Opinions of Russian Teachers

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2014-11-01

    Full Text Available The analysis of the conducted questionnaire among teachers of secondary schools showed that realizing the great importance of the media in the contemporary information society, three quarters of them support the idea of media education at schools and 58% believe that a new major for pedagogical institutes needs to be introduced - “Media Education”. Most of teachers justly think that the combination of the autonomous and integrated media lessons is the most effective way today for the development of media education in Russia, and therefore - for the increase of media literacy of the young generation. However, in spite of the fact that majority of teachers define the aim to develop the critical thinking of the audience as one of the most important, they significantly overestimate the weight of “protectionist” approach to media studies today, and on the contrary, undervalue the goals to develop the democratic thinking of the pupils, their knowledge about theory and history of media and media culture. Moreover, despite of the general support of media education ideas (in theory expressed by 75 % of the teachers, actually only one third of them use some elements of media education at their lessons (in reality, and one fifth of the group does not integrate it at all. The hardest obstacle on the way of media education into the Russian classrooms is the absence of financial motivation, according to the teachers, though to our point of view, last but not the least is the passive anticipation of the authority’s directives and insufficient level of knowledge of today’s Russian teachers in terms of the theory and methods of media education. Thus, the analysis of the teachers’ questionnaire has given us additional proof for the necessity of the official introduction of the new university-level Major- “Media Education” (namely, Major, because the homonymous Minor was registered in 2002 and media education courses for the students of all

  14. Notes for media reinvention

    Directory of Open Access Journals (Sweden)

    Jesús Miguel Flores-Vivar

    2009-10-01

    Full Text Available Journalism and media are going through a change of era. This change is reflected in the transformation of journalism and media-lived and that another major in 1980 that became known as mediamorphosis, by this, professionals have to learn new roles. The impact of information technology and Internet has changed the way how you present the news and, most importantly, transform the business model that has characterized media companies. This article analyzes the current situation provides some strategic guidelines to be followed by some media-and-do and studied some of the new profiles arebeginning to emerge as a result of the reinvention of journalism and the media.

  15. Prosocial effects of media.

    Science.gov (United States)

    Hogan, Marjorie J

    2012-06-01

    Parents, teachers, health care providers, and other caring adults worry about the harmful influence of media messages and images on children and teens and wonder how to recognize and encourage positive and healthy use of media. For decades, experts have commented on the power of media. Media depictions can lead to negative attitudes and behavior in some young viewers. This article discusses whether prosocial, tolerant, and cooperative attitudes and behavior can be learned and imitated by children and adolescents and whether media can nurture or stimulate creativity or actively promote health and well-being in young consumers. Copyright © 2012 Elsevier Inc. All rights reserved.

  16. A method for phenomenological and chemical kinetics study of autocatalytic reactive dissolution by optical microscopy. The case of uranium dioxide dissolution in nitric acid media

    Directory of Open Access Journals (Sweden)

    Marc Philippe

    2018-01-01

    Full Text Available Dissolution is a milestone of the head-end of hydrometallurgical processes, as the stabilization rates of the chemical elements determine the process performance and hold-up. This study aims at better understanding the chemical and physico-chemical phenomena of uranium dioxide dissolution reactions in nitric acid media in the Purex process, which separates the reusable materials and the final wastes of the spent nuclear fuels. It has been documented that the attack of sintering-manufactured uranium dioxide solids occurs through preferential attack sites, which leads to the development of cracks in the solids. Optical microscopy observations show that in some cases, the development of these cracks leads to the solid cleavage. It is shown here that the dissolution of the detached fragments is much slower than the process of the complete cleavage of the solid, and occurs with no disturbing phenomena, like gas bubbling. This fact has motivated the measurement of dissolution kinetics using optical microscopy and image processing. By further discriminating between external resistance and chemical reaction, the “true” chemical kinetics of the reaction have been measured, and the highly autocatalytic nature of the reaction confirmed. Based on these results, the constants of the chemical reactions kinetic laws have also been evaluated.

  17. A method for phenomenological and chemical kinetics study of autocatalytic reactive dissolution by optical microscopy. The case of uranium dioxide dissolution in nitric acid media

    Science.gov (United States)

    Marc, Philippe; Magnaldo, Alastair; Godard, Jérémy; Schaer, Éric

    2018-03-01

    Dissolution is a milestone of the head-end of hydrometallurgical processes, as the stabilization rates of the chemical elements determine the process performance and hold-up. This study aims at better understanding the chemical and physico-chemical phenomena of uranium dioxide dissolution reactions in nitric acid media in the Purex process, which separates the reusable materials and the final wastes of the spent nuclear fuels. It has been documented that the attack of sintering-manufactured uranium dioxide solids occurs through preferential attack sites, which leads to the development of cracks in the solids. Optical microscopy observations show that in some cases, the development of these cracks leads to the solid cleavage. It is shown here that the dissolution of the detached fragments is much slower than the process of the complete cleavage of the solid, and occurs with no disturbing phenomena, like gas bubbling. This fact has motivated the measurement of dissolution kinetics using optical microscopy and image processing. By further discriminating between external resistance and chemical reaction, the "true" chemical kinetics of the reaction have been measured, and the highly autocatalytic nature of the reaction confirmed. Based on these results, the constants of the chemical reactions kinetic laws have also been evaluated.

  18. Use and Acceptance of Social Media among Health Educators

    Science.gov (United States)

    Hanson, Carl; West, Joshua; Neiger, Brad; Thackeray, Rosemary; Barnes, Michael; McIntyre, Emily

    2011-01-01

    Background: As social media use grows in popularity, health educators are challenged to think differently about how to communicate with audiences. Purpose: The purpose of this study was to explore social media use and factors that determine acceptance of social media use among health educators. Methods: A random sample of Certified Health…

  19. Teaching Blended Content Analysis and Critically Vigilant Media Consumption

    Science.gov (United States)

    Harris, Christopher S.

    2015-01-01

    The semester-long activity described herein uses an integrated instructional approach to media studies to introduce students to the research method of qualitative content analysis and help them become more critically vigilant media consumers. The goal is to increase students' media literacy by guiding them in the design of an exploratory…

  20. The social dimension of modern media space and its content

    Directory of Open Access Journals (Sweden)

    V L Mouzykant

    2014-12-01

    Full Text Available The article describes the nature of the relationships between subjects of the modern media space as a part of an open social system. The authors analyze the consequences of growth of media consumption, the Internet influence on the behavior of Russians and methods to measure the emerging media space and social networks.