WorldWideScience

Sample records for methods census block

  1. Region 9 Census Block 2010

    Science.gov (United States)

    Geography:The TIGER Line Files are feature classes and related database files (.) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by non visible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up t

  2. 2015 Census Blocks Geodatabase

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master...

  3. Harding County 2000 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  4. Union County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Bernalillo County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Guadalupe County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Catron County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Cibola County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. Sandoval County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Colfax County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. Roosevelt County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. Grant County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Sierra County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Otero County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Lea County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Lincoln County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Curry County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Eddy County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. Valencia County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Hidalgo County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Harding County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Mora County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Socorro County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Quay County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Luna County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Chaves County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Taos County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Torrance County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. De Baca County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  10. Santa Fe County 2000 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  11. Sandoval County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  12. Lea County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  13. Bernalillo County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  14. Taos County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  15. San Miguel County 2000 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  16. Catron County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  17. Rio Arriba County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  18. Los Alamos County 2000 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  19. Otero County 2000 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  20. Census Tracts & Block Groups, 2004, East Baton Rouge, Louisiana

    Data.gov (United States)

    Louisiana Geographic Information Center — This is a graphical polygon dataset depicting the polygon boundaries of 107 semi-permanent census tracts and the census blocks within the Parish of East Baton Rouge....

  1. Eddy County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Valencia County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Socorro County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Sandoval County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Rio Arriba County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Curry County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Union County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. San Miguel County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. De Baca County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Mora County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. Otero County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. San Juan County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Harding County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Torrance County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Catron County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. De Baca County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Dona Ana County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Los Alamos County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. San Juan County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Santa Fe County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. McKinley County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Rio Arriba County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. San Miguel County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Santa Fe County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Bernalillo County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Taos County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Grant County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Los Alamos County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. Social Vulnerability Index (SoVI) for Delaware based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Delaware census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  10. Social Vulnerability Index (SoVI) for Coastal States based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of coastal states census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  11. Social Vulnerability Index (SoVI) for Mississippi based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Mississippi census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  12. Social Vulnerability Index (SoVI) for Louisiana based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Louisiana census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  13. Social Vulnerability Index (SoVI) for Alabama based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Alabama census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  14. Social Vulnerability Index (SoVI) for Washington based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Washington census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  15. Social Vulnerability Index (SoVI) for Hawaii based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Hawaii census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  16. Social Vulnerability Index (SoVI) for Wisconsin based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Wisconsin census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  17. Social Vulnerability Index (SoVI) for Rhode Island based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Rhode Island census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  18. Social Vulnerability Index (SoVI) for Georgia based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Georgia census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  19. Social Vulnerability Index (SoVI) for Michigan based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Michigan census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  20. Social Vulnerability Index (SoVI) for Virginia based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Virginia census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  1. Social Vulnerability Index (SoVI) for Maryland based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Maryland census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  2. Social Vulnerability Index (SoVI) for Maine based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Maine census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  3. Social Vulnerability Index (SoVI) for Alaska based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Alaska census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  4. Social Vulnerability Index (SoVI) for New Hampshire based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of New Hampshire census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  5. Social Vulnerability Index (SoVI) for Illinois based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Illinois census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  6. Social Vulnerability Index (SoVI) for Ohio based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Ohio census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  7. Social Vulnerability Index (SoVI) for Pennsylvania based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Pennsylvania census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  8. Social Vulnerability Index (SoVI) for Connecticut based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Connecticut census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  9. Social Vulnerability Index (SoVI) for New Jersey based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of New Jersey census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  10. Social Vulnerability Index (SoVI) for New York based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of New York census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  11. Social Vulnerability Index (SoVI) for Massachusetts based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Massachusetts census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  12. Social Vulnerability Index (SoVI) for Texas based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Texas census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  13. Social Vulnerability Index (SoVI) for Indiana based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Indiana census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  14. Social Vulnerability Index (SoVI) for South Carolina based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of South Carolina census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  15. Social Vulnerability Index (SoVI) for Oregon based on 2000 Census Block Groups

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Oregon census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

  16. McKinley County 2010 Census Block Groups

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. New Mexico, 2010 Census Block State-based

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. New Mexico, 2010 Census Block Group State-based

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. VT 2010 Census Block Group Boundaries and Statistics

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) BLCKGR2010 contains a subset of attributes from Summary File 1 of the 2010 Decennial Census. The TIGER/Line Files are shapefiles and related...

  20. EnviroAtlas - Phoenix, AZ - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  1. EnviroAtlas - Pittsburgh, PA - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  2. EnviroAtlas - Fresno, CA - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  3. EnviroAtlas - Durham, NC - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  4. EnviroAtlas - Cleveland, OH - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  5. EnviroAtlas - New Bedford, MA - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  6. EnviroAtlas - Woodbine, IA - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  7. EnviroAtlas - Green Bay, WI - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  8. EnviroAtlas - Portland, ME - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  9. EnviroAtlas - Milwaukee, WI - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  10. EnviroAtlas - Austin, TX - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  11. EnviroAtlas - Tampa, FL - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  12. EnviroAtlas - New York, NY - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  13. EnviroAtlas - Paterson, NJ - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  14. EnviroAtlas - Portland, OR - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  15. EnviroAtlas - Des Moines, IA - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  16. EnviroAtlas - Memphis, TN - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  17. EnviroAtlas - Minneapolis/St. Paul, MN - Historic Places by Census Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the...

  18. EnviroAtlas - Commute Time to Work by Census Block Group for the Conterminous United States

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the commute time of workers to their workplace for each Census Block Group (CBG) during 2008-2012. Data were compiled from the...

  19. 15 CFR 50.40 - Fee structure for statistics for city blocks in the 1980 Census of Population and Housing.

    Science.gov (United States)

    2010-01-01

    ... blocks in the 1980 Census of Population and Housing. 50.40 Section 50.40 Commerce and Foreign Trade... the 1980 Census of Population and Housing. (a) As part of the regular program of the 1980 census, the Census Bureau will publish printed reports containing certain summary population and housing statistics...

  20. TIGER/Line Shapefile, 2014, Series Information File for the 2010 Census Block State-based Shapefile

    Data.gov (United States)

    US Census Bureau, Department of Commerce — Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries...

  1. [The Italian deprivation index at census block level: definition, description and association with general mortality].

    Science.gov (United States)

    Caranci, Nicola; Biggeri, Annibale; Grisotto, Laura; Pacelli, Barbara; Spadea, Teresa; Costa, Giuseppe

    2010-01-01

    the study is aimed at developing a nationwide deprivation index at municipality and census block level, based on the 2001 Census data, and meeting epidemiological needs. The study uses data drawn from the 2001 General Census of Population and Housing. From the 280 variables defined at census block level (352,605 census tracts with average number of inhabitants 169, standard deviation 225; and average area 0.6 km², sd 2.4 km²) five traits that operationally combine to represent the multidimensionality of the social and material deprivation concept have been selected; these are: low level of education, unemployment, non-home ownership, one parent family and overcrowding. The index is calculated by summing standardized indicators and it is also available as categorical by quintiles of population. The same procedure is applied to aggregate frequency data at municipality level. The correlation between mortality and deprivation has been evaluated using 2000-2004 general mortality. considering national data, a strong north-south gradient in deprivation was observed. The municipality deprivation index 2001 is highly correlated to the index likewise calculated on the basis of the previous 1991 Census (r=0.91). General mortality was positively correlated to the index (in particular in population up to 64 years and in larger size municipalities). the pattern described by the deprivation index was coherent with what is already known about geographic distribution of poverty and its impact on mortality. Such outcome bears out the index use for epidemiological purposes.

  2. 77 FR 15369 - Mobility Fund Phase I Auction GIS Data of Potentially Eligible Census Blocks

    Science.gov (United States)

    2012-03-15

    ... GIS Data of Potentially Eligible Census Blocks AGENCY: Federal Communications Commission. ACTION... Bureaus (the ``Bureaus'') announce the availability of geographic information system (GIS) data for the...). SUPPLEMENTARY INFORMATION: This is a summary of the Mobility Fund Phase I Auction GIS Data for Potentially...

  3. TIGER/Line Shapefile, 2010, 2010 state, Hawaii, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. TIGER/Line Shapefile, 2010, 2010 state, Indiana, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. TIGER/Line Shapefile, 2010, 2010 state, Georgia, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. TIGER/Line Shapefile, 2010, 2010 state, California, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. TIGER/Line Shapefile, 2010, 2010 state, New York, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. TIGER/Line Shapefile, 2010, 2010 state, Virginia, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. TIGER/Line Shapefile, 2010, 2010 state, Texas, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. TIGER/Line Shapefile, 2010, 2010 state, Tennessee, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. TIGER/Line Shapefile, 2010, 2010 state, Michigan, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. TIGER/Line Shapefile, 2010, 2010 state, Delaware, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. TIGER/Line Shapefile, 2010, 2010 state, Idaho, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. TIGER/Line Shapefile, 2010, 2010 state, Montana, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. TIGER/Line Shapefile, 2010, 2010 state, Oregon, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. TIGER/Line Shapefile, 2010, 2010 state, Kansas, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. TIGER/Line Shapefile, 2010, 2010 state, Ohio, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. TIGER/Line Shapefile, 2010, 2010 state, South Dakota, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. TIGER/Line Shapefile, 2010, 2010 state, West Virginia, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. TIGER/Line Shapefile, 2010, 2010 state, Rhode Island, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. TIGER/Line Shapefile, 2010, 2010 state, Mississippi, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. TIGER/Line Shapefile, 2010, 2010 state, Colorado, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. TIGER/Line Shapefile, 2010, 2010 state, Kentucky, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. TIGER/Line Shapefile, 2010, 2010 state, Washington, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. TIGER/Line Shapefile, 2010, 2010 state, North Carolina, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. TIGER/Line Shapefile, 2010, 2010 state, North Dakota, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. TIGER/Line Shapefile, 2010, 2010 state, Maryland, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. TIGER/Line Shapefile, 2010, 2010 state, District of Columbia, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. TIGER/Line Shapefile, 2010, 2010 state, Wisconsin, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. TIGER/Line Shapefile, 2010, 2010 state, Missouri, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. TIGER/Line Shapefile, 2010, 2010 state, Illinois, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. TIGER/Line Shapefile, 2010, 2010 state, Alabama, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. TIGER/Line Shapefile, 2010, 2010 state, New Hampshire, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. TIGER/Line Shapefile, 2010, 2010 state, South Carolina, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. TIGER/Line Shapefile, 2010, 2010 state, Minnesota, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. TIGER/Line Shapefile, 2010, 2010 state, Connecticut, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. TIGER/Line Shapefile, 2010, 2010 state, Wyoming, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. TIGER/Line Shapefile, 2010, 2010 state, New Jersey, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. TIGER/Line Shapefile, 2010, 2010 state, Vermont, 2010 Census Block State-based

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Regional Growth and income convergence in the western black belt counties of Alabama: evidence from census block group data

    Science.gov (United States)

    Buddhi Gyawali; Rory Fraser; James Bukenya; John Schelhas

    2010-01-01

    This paper examines the effects of growth in African Ameriocan population, employment, and human capital on growth in per capita income at the census block group (CBG) level using ordinary least square and spatial reqression models. The results indicate the presence of conditional incaom conbergence between 1980 and 2000 with poorer CBGs growing faster than the...

  1. 2020 Census

    Science.gov (United States)

    What We Do Our Research Business Opportunities Census Careers Field Jobs by State Regional Offices /Programs Respond, Survey Data Newsroom News, Blogs About Us Our Research Search Population Economy Business ., area. 2017 Census Test The 2017 Census Test provided the opportunity to research new methods and

  2. TIGER/Line Shapefile, 2010, 2010 Census Block State-based

    Data.gov (United States)

    U.S. Environmental Protection Agency — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Current Census Blocks for San Miguel County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  4. Current Census Blocks for Los Alamos County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  5. Current Census Blocks for Hidalgo County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  6. Current Census Blocks for Luna County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  7. Current Census Blocks for Catron County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  8. Current Census Blocks for Chaves County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  9. Current Census Blocks for Quay County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  10. R2 & NE Block Group - 2010 Census; Housing and Population Summary

    Data.gov (United States)

    U.S. Environmental Protection Agency — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. EnviroAtlas - Household income metrics related to emotional well-being by Census Block Group for the Conterminous United States

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset portrays the percentage of population within different household income ranges for each Census Block Group (CBG), a threshold estimated to...

  12. Block-conjugate-gradient method

    International Nuclear Information System (INIS)

    McCarthy, J.F.

    1989-01-01

    It is shown that by using the block-conjugate-gradient method several, say s, columns of the inverse Kogut-Susskind fermion matrix can be found simultaneously, in less time than it would take to run the standard conjugate-gradient algorithm s times. The method improves in efficiency relative to the standard conjugate-gradient algorithm as the fermion mass is decreased and as the value of the coupling is pushed to its limit before the finite-size effects become important. Thus it is potentially useful for measuring propagators in large lattice-gauge-theory calculations of the particle spectrum

  13. Randomized Block Cubic Newton Method

    KAUST Repository

    Doikov, Nikita; Richtarik, Peter

    2018-01-01

    We study the problem of minimizing the sum of three convex functions: a differentiable, twice-differentiable and a non-smooth term in a high dimensional setting. To this effect we propose and analyze a randomized block cubic Newton (RBCN) method, which in each iteration builds a model of the objective function formed as the sum of the natural models of its three components: a linear model with a quadratic regularizer for the differentiable term, a quadratic model with a cubic regularizer for the twice differentiable term, and perfect (proximal) model for the nonsmooth term. Our method in each iteration minimizes the model over a random subset of blocks of the search variable. RBCN is the first algorithm with these properties, generalizing several existing methods, matching the best known bounds in all special cases. We establish ${\\cal O}(1/\\epsilon)$, ${\\cal O}(1/\\sqrt{\\epsilon})$ and ${\\cal O}(\\log (1/\\epsilon))$ rates under different assumptions on the component functions. Lastly, we show numerically that our method outperforms the state-of-the-art on a variety of machine learning problems, including cubically regularized least-squares, logistic regression with constraints, and Poisson regression.

  14. Randomized Block Cubic Newton Method

    KAUST Repository

    Doikov, Nikita

    2018-02-12

    We study the problem of minimizing the sum of three convex functions: a differentiable, twice-differentiable and a non-smooth term in a high dimensional setting. To this effect we propose and analyze a randomized block cubic Newton (RBCN) method, which in each iteration builds a model of the objective function formed as the sum of the natural models of its three components: a linear model with a quadratic regularizer for the differentiable term, a quadratic model with a cubic regularizer for the twice differentiable term, and perfect (proximal) model for the nonsmooth term. Our method in each iteration minimizes the model over a random subset of blocks of the search variable. RBCN is the first algorithm with these properties, generalizing several existing methods, matching the best known bounds in all special cases. We establish ${\\\\cal O}(1/\\\\epsilon)$, ${\\\\cal O}(1/\\\\sqrt{\\\\epsilon})$ and ${\\\\cal O}(\\\\log (1/\\\\epsilon))$ rates under different assumptions on the component functions. Lastly, we show numerically that our method outperforms the state-of-the-art on a variety of machine learning problems, including cubically regularized least-squares, logistic regression with constraints, and Poisson regression.

  15. Census Blockgroups for the United States Virgin Islands

    Data.gov (United States)

    U.S. Environmental Protection Agency — A census block group (BG) is a cluster of census blocks having the same first digit of their four-digit identifying numbers within a census tract. (See also Census...

  16. Demographic Data - TIGER/Line Shapefile, 2010, 2010 county, Miami-Dade County, FL, 2010 Census Block County-based

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Minimum description length block finder, a method to identify haplotype blocks and to compare the strength of block boundaries.

    Science.gov (United States)

    Mannila, H; Koivisto, M; Perola, M; Varilo, T; Hennah, W; Ekelund, J; Lukk, M; Peltonen, L; Ukkonen, E

    2003-07-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the significance of each block boundary. We have applied the method to the published data of Daly and colleagues. The results expose some problems that exist in the current methods for the evaluation of the significance of predicted block boundaries. Our method, MDL block finder, can be used to compare block borders in different sample sets, and we demonstrate this by applying the MDL-based method to define the block structure in chromosomes from population isolates.

  18. Census Data

    Data.gov (United States)

    Department of Housing and Urban Development — The Bureau of the Census has released Census 2000 Summary File 1 (SF1) 100-Percent data. The file includes the following population items: sex, age, race, Hispanic...

  19. Application of multi-block methods in cement production

    DEFF Research Database (Denmark)

    Svinning, K.; Høskuldsson, Agnar

    2008-01-01

    distribution and the two last blocks the superficial microstructure analysed by differential thermo gravimetric analysis. The multi-block method is used to identify the role of each part. The score vectors of each block can be analysed separately or together with score vectors of other blocks. Stepwise......Compressive strength at 1 day of Portland cement as a function of the microstructure of cement was statistically modelled by application of multi-block regression method. The observation X-matrix was partitioned into four blocks, the first block representing the mineralogy, the second particle size...... regression is used to find minimum number of variables of each block. The multi-block method proved useful in determining the modelling strength of each data block and finding minimum number of variables within each data block....

  20. TIGER/Line Shapefile, 2010, Series Information File for the 2010 Census Block State-based Shapefile with Housing and Population Data

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Minimum Description Length Block Finder, a Method to Identify Haplotype Blocks and to Compare the Strength of Block Boundaries

    OpenAIRE

    Mannila, H.; Koivisto, M.; Perola, M.; Varilo, T.; Hennah, W.; Ekelund, J.; Lukk, M.; Peltonen, L.; Ukkonen, E.

    2003-01-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the ...

  2. Census Videos

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  3. Census Photos

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  4. Census Audio

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  5. Census Careers

    Science.gov (United States)

    Indicators Economic Studies Industry Statistics Portal Other Economic Programs Business is a large part of Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics Portal Other Economic Programs Business Latest Information Business Characteristics Classification Codes

  6. The "Tracked Roaming Transect" and distance sampling methods increase the efficiency of underwater visual censuses.

    Directory of Open Access Journals (Sweden)

    Alejo J Irigoyen

    Full Text Available Underwater visual census (UVC is the most common approach for estimating diversity, abundance and size of reef fishes in shallow and clear waters. Abundance estimation through UVC is particularly problematic in species occurring at low densities and/or highly aggregated because of their high variability at both spatial and temporal scales. The statistical power of experiments involving UVC techniques may be increased by augmenting the number of replicates or the area surveyed. In this work we present and test the efficiency of an UVC method based on diver towed GPS, the Tracked Roaming Transect (TRT, designed to maximize transect length (and thus the surveyed area with respect to diving time invested in monitoring, as compared to Conventional Strip Transects (CST. Additionally, we analyze the effect of increasing transect width and length on the precision of density estimates by comparing TRT vs. CST methods using different fixed widths of 6 and 20 m (FW3 and FW10, respectively and the Distance Sampling (DS method, in which perpendicular distance of each fish or group of fishes to the transect line is estimated by divers up to 20 m from the transect line. The TRT was 74% more time and cost efficient than the CST (all transect widths considered together and, for a given time, the use of TRT and/or increasing the transect width increased the precision of density estimates. In addition, since with the DS method distances of fishes to the transect line have to be estimated, and not measured directly as in terrestrial environments, errors in estimations of perpendicular distances can seriously affect DS density estimations. To assess the occurrence of distance estimation errors and their dependence on the observer's experience, a field experiment using wooden fish models was performed. We tested the precision and accuracy of density estimators based on fixed widths and the DS method. The accuracy of the estimates was measured comparing the actual

  7. Robust and Adaptive Block Tracking Method Based on Particle Filter

    Directory of Open Access Journals (Sweden)

    Bin Sun

    2015-10-01

    Full Text Available In the field of video analysis and processing, object tracking is attracting more and more attention especially in traffic management, digital surveillance and so on. However problems such as objects’ abrupt motion, occlusion and complex target structures would bring difficulties to academic study and engineering application. In this paper, a fragmentsbased tracking method using the block relationship coefficient is proposed. In this method, we use particle filter algorithm and object region is divided into blocks initially. The contribution of this method is that object features are not extracted just from a single block, the relationship between current block and its neighbor blocks are extracted to describe the variation of the block. Each block is weighted according to the block relationship coefficient when the block is voted on the most matched region in next frame. This method can make full use of the relationship between blocks. The experimental results demonstrate that our method can provide good performance in condition of occlusion and abrupt posture variation.

  8. Demographic Data - TIGER/Line Shapefile, 2010, 2010 county, Miami-Dade County, FL, 2010 Census Block Group County-based

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. 2017 Census Test

    Science.gov (United States)

    /Programs Latest Information Are you in a Survey? 2020 Census 2018 Census Test 2010 Census American Information Surveys/Programs Main Are you in a Survey? 2020 Census 2018 Census Test If you have received a Census. Latest Information The 2018 Census Test will take place in Pierce County, Wash.; Providence

  10. Comparison of the Cellient(™) automated cell block system and agar cell block method.

    Science.gov (United States)

    Kruger, A M; Stevens, M W; Kerley, K J; Carter, C D

    2014-12-01

    To compare the Cellient(TM) automated cell block system with the agar cell block method in terms of quantity and quality of diagnostic material and morphological, histochemical and immunocytochemical features. Cell blocks were prepared from 100 effusion samples using the agar method and Cellient system, and routinely sectioned and stained for haematoxylin and eosin and periodic acid-Schiff with diastase (PASD). A preliminary immunocytochemical study was performed on selected cases (27/100 cases). Sections were evaluated using a three-point grading system to compare a set of morphological parameters. Statistical analysis was performed using Fisher's exact test. Parameters assessing cellularity, presence of single cells and definition of nuclear membrane, nucleoli, chromatin and cytoplasm showed a statistically significant improvement on Cellient cell blocks compared with agar cell blocks (P cell groups, PASD staining or the intensity or clarity of immunocytochemical staining. A discrepant immunocytochemistry (ICC) result was seen in 21% (13/63) of immunostains. The Cellient technique is comparable with the agar method, with statistically significant results achieved for important morphological features. It demonstrates potential as an alternative cell block preparation method which is relevant for the rapid processing of fine needle aspiration samples, malignant effusions and low-cellularity specimens, where optimal cell morphology and architecture are essential. Further investigation is required to optimize immunocytochemical staining using the Cellient method. © 2014 John Wiley & Sons Ltd.

  11. Method to fabricate block fuel elements for high temperature reactors

    International Nuclear Information System (INIS)

    Hrovat, M.; Rachor, L.

    1977-01-01

    The fabrication of block fuel elements for gas-cooled high temperature reactors can be improved upon by adding 0.2 to 2 wt.% of a hydrocarbon compound to the lubricating mixture prior to pressing. Hexanol or octanol are named as substances. The dimensional accuracy of the block is thus improved. 2 examples illustrate the method. (RW) [de

  12. Method to fabricate block fuel elements for high temperature reactors

    International Nuclear Information System (INIS)

    Hrovat, M.; Rachor, L.

    1978-01-01

    The fabrication of block fuel elements for gas-cooled high temperature reactors can be improved upon by adding 0.2 to 2 wt.% of a hydrocarbon compound to the lubricating mixture prior to pressing. Hexanol or octanol are named as substances. The dimensional accuracy of the block is thus improved. 2 examples illustrate the method. (orig./PW)

  13. The block Gauss-Seidel method in sound transmission problems

    OpenAIRE

    Poblet-Puig, Jordi; Rodríguez Ferran, Antonio

    2009-01-01

    Sound transmission through partitions can be modelled as an acoustic fluid-elastic structure interaction problem. The block Gauss-Seidel iterative method is used in order to solve the finite element linear system of equations. The blocks are defined in a natural way, respecting the fluid and structural domains. The convergence criterion (spectral radius of iteration matrix smaller than one) is analysed and interpreted in physical terms by means of simple one-dimensional problems. This anal...

  14. NOLB: Nonlinear Rigid Block Normal Mode Analysis Method

    OpenAIRE

    Hoffmann , Alexandre; Grudinin , Sergei

    2017-01-01

    International audience; We present a new conceptually simple and computationally efficient method for nonlinear normal mode analysis called NOLB. It relies on the rotations-translations of blocks (RTB) theoretical basis developed by Y.-H. Sanejouand and colleagues. We demonstrate how to physically interpret the eigenvalues computed in the RTB basis in terms of angular and linear velocities applied to the rigid blocks and how to construct a nonlinear extrapolation of motion out of these veloci...

  15. Multicore Performance of Block Algebraic Iterative Reconstruction Methods

    DEFF Research Database (Denmark)

    Sørensen, Hans Henrik B.; Hansen, Per Christian

    2014-01-01

    Algebraic iterative methods are routinely used for solving the ill-posed sparse linear systems arising in tomographic image reconstruction. Here we consider the algebraic reconstruction technique (ART) and the simultaneous iterative reconstruction techniques (SIRT), both of which rely on semiconv......Algebraic iterative methods are routinely used for solving the ill-posed sparse linear systems arising in tomographic image reconstruction. Here we consider the algebraic reconstruction technique (ART) and the simultaneous iterative reconstruction techniques (SIRT), both of which rely...... on semiconvergence. Block versions of these methods, based on a partitioning of the linear system, are able to combine the fast semiconvergence of ART with the better multicore properties of SIRT. These block methods separate into two classes: those that, in each iteration, access the blocks in a sequential manner...... a fixed relaxation parameter in each method, namely, the one that leads to the fastest semiconvergence. Computational results show that for multicore computers, the sequential approach is preferable....

  16. Polystyrene-b-polyethylene oxide block copolymer membranes, methods of making, and methods of use

    KAUST Repository

    Peinemann, Klaus-Viktor; Karunakaran, Madhavan

    2015-01-01

    Embodiments of the present disclosure provide for polystyrene-b-polyethylene oxide (PS-b-PEO) block copolymer nanoporous membranes, methods of making a PS-b-PEO block copolymer nanoporous membrane, methods of using PS-b-PEO block copolymer nanoporous membranes, and the like.

  17. Polystyrene-b-polyethylene oxide block copolymer membranes, methods of making, and methods of use

    KAUST Repository

    Peinemann, Klaus-Viktor

    2015-04-16

    Embodiments of the present disclosure provide for polystyrene-b-polyethylene oxide (PS-b-PEO) block copolymer nanoporous membranes, methods of making a PS-b-PEO block copolymer nanoporous membrane, methods of using PS-b-PEO block copolymer nanoporous membranes, and the like.

  18. Using an Augmented Lagrangian Method and block fracturing in the DDA method

    International Nuclear Information System (INIS)

    Lin, C.T.; Amadei, B.; Sture, S.

    1994-01-01

    This paper presents two extensions to the Discontinuous Deformation Analysis (DDA) method orginally proposed by Shi for modeling the response of blocky rock masses to mechanical loading. The first extension consists of improving the block contact algorithm. An Augmented Lagrangian Method is used to replace the Penalty Method orginally proposed. It allows Lagrange multipliers to be introduced without increasing the number of equations that need to be solved and thus, block contract forces can be calculated more accurately. A block fracturing capability based on a three-parameter Mohr-Coulomb criterion represents the second extension. It allows for shear or tensile fracturing of intact blocks and the formation of smaller blocks

  19. TIGER/Line Shapefile, 2014, Series Information File for the Current Tribal Block Group National Shapefile

    Data.gov (United States)

    US Census Bureau, Department of Commerce — A tribal block group is a cluster of census tabulation blocks within a single tribal census tract delineated by American Indian tribal participants or the Census...

  20. Qualified Census Tracts

    Data.gov (United States)

    Department of Housing and Urban Development — A Qualified Census Tract (QCT) is any census tract (or equivalent geographic area defined by the Census Bureau) in which at least 50% of households have an income...

  1. Properties of a class of block-iterative methods

    International Nuclear Information System (INIS)

    Elfving, Tommy; Nikazad, Touraj

    2009-01-01

    We study a class of block-iterative (BI) methods proposed in image reconstruction for solving linear systems. A subclass, symmetric block-iteration (SBI), is derived such that for this subclass both semi-convergence analysis and stopping-rules developed for fully simultaneous iteration apply. Also results on asymptotic convergence are given, e.g., BI exhibit cyclic convergence irrespective of the consistency of the linear system. Further it is shown that the limit points of SBI satisfy a weighted least-squares problem. We also present numerical results obtained using a trained stopping rule on SBI

  2. Cytokinesis-block micronucleus method in micro-blood cultures

    International Nuclear Information System (INIS)

    Liu Jinwen; Wang Lianzhi; Yang Cangzhen; Yao Yanyu

    1991-01-01

    This paper reports the cytokinesis-block micronucleus method in micro-blood cultures. The observations on detection induced micronuclei of different doses of 60 Co γ-rays irradiation and spontaneous micronucleus of different ages were performed with CB method in comporison with conventional micronucleus (CM) method. The results showed that with direct peripheral micro-blood cultures the cytoknesis-block micronuclei is also obtained. Using CB method, the micronuclei fequency of different ages was linear relationship, Y = 1.62 + 0.74 D, the spontaneous micronuclei frequency of different ages was 4.14%, the induced micronuclei also was a linear relationship, Y = 6.01 + 0.692 D. Using CM method, it showed that the induced micronuclei was a linear relationship, Y = 0.486 D - 1.968, but there is no significant difference between the micronuclei frequency of different ages. Comparison with CM and direct blood smear methods confirmed that the cytokinesis-block method of micro-blood cultures is more sensitive and precise

  3. Development of connecting method for mechanically cut reinforced concrete blocks

    International Nuclear Information System (INIS)

    Nishiuchi, Tatsuo

    2005-01-01

    The purpose of the study is to develop a practical method of disposing and recycling in dismantled reinforced concrete structures. We have devised a new method in which mechanically cut reinforced concrete blocks are connected and they are reused as a structural beam. In this method, concrete blocks are connected with several steel bars and the connected surface is wrapped with a fiber sheet. We verified that the load capacity of renewal beams was considerably large as same as that of continuous structural beams on the basis of experimental as well as numerical analysis results. As far as construction cost of reinforced concrete walls are concerned, we demonstrated that the cost of this method is slightly lower than that of the plan to use new and recycle materials. (author)

  4. Multi-block methods in multivariate process control

    DEFF Research Database (Denmark)

    Kohonen, J.; Reinikainen, S.P.; Aaljoki, K.

    2008-01-01

    methods the effect of a sub-process can be seen and an example with two blocks, near infra-red, NIR, and process data, is shown. The results show improvements in modelling task, when a MB-based approach is used. This way of working with data gives more information on the process than if all data...... are in one X-matrix. The procedure is demonstrated by an industrial continuous process, where knowledge about the sub-processes is available and X-matrix can be divided into blocks between process variables and NIR spectra.......In chemometric studies all predictor variables are usually collected in one data matrix X. This matrix is then analyzed by PLS regression or other methods. When data from several different sub-processes are collected in one matrix, there is a possibility that the effects of some sub-processes may...

  5. Modified Block Newton method for the lambda modes problem

    Energy Technology Data Exchange (ETDEWEB)

    González-Pintor, S., E-mail: segonpin@isirym.upv.es [Departamento de Ingeniería Química y Nuclear, Universidad Politécnica de Valencia, Camino de Vera 14, 46022 Valencia (Spain); Ginestar, D., E-mail: dginestar@mat.upv.es [Instituto de Matemática Multidisciplinar, Universidad Politécnica de Valencia, Camino de Vera 14, 46022 Valencia (Spain); Verdú, G., E-mail: gverdu@iqn.upv.es [Departamento de Ingeniería Química y Nuclear, Universidad Politécnica de Valencia, Camino de Vera 14, 46022 Valencia (Spain)

    2013-06-15

    Highlights: ► The Modal Method is based on expanding the solution in a set of dominant modes. ► Updating the set of dominant modes improve its performance. ► A Modified Block Newton Method, which use previous calculated modes, is proposed. ► The method exhibits a very good local convergence with few iterations. ► Good performance results are also obtained for heavy perturbations. -- Abstract: To study the behaviour of nuclear power reactors it is necessary to solve the time dependent neutron diffusion equation using either a rectangular mesh for PWR and BWR reactors or a hexagonal mesh for VVER reactors. This problem can be solved by means of a modal method, which uses a set of dominant modes to expand the neutron flux. For the transient calculations using the modal method with a moderate number of modes, these modes must be updated each time step to maintain the accuracy of the solution. The updating modes process is also interesting to study perturbed configurations of a reactor. A Modified Block Newton method is studied to update the modes. The performance of the Newton method has been tested for a steady state perturbation analysis of two 2D hexagonal reactors, a perturbed configuration of the IAEA PWR 3D reactor and two configurations associated with a boron dilution transient in a BWR reactor.

  6. On some properties of the block linear multi-step methods | Chollom ...

    African Journals Online (AJOL)

    The convergence, stability and order of Block linear Multistep methods have been determined in the past based on individual members of the block. In this paper, methods are proposed to examine the properties of the entire block. Some Block Linear Multistep methods have been considered, their convergence, stability and ...

  7. A simple reliability block diagram method for safety integrity verification

    International Nuclear Information System (INIS)

    Guo Haitao; Yang Xianhui

    2007-01-01

    IEC 61508 requires safety integrity verification for safety related systems to be a necessary procedure in safety life cycle. PFD avg must be calculated to verify the safety integrity level (SIL). Since IEC 61508-6 does not give detailed explanations of the definitions and PFD avg calculations for its examples, it is difficult for common reliability or safety engineers to understand when they use the standard as guidance in practice. A method using reliability block diagram is investigated in this study in order to provide a clear and feasible way of PFD avg calculation and help those who take IEC 61508-6 as their guidance. The method finds mean down times (MDTs) of both channel and voted group first and then PFD avg . The calculated results of various voted groups are compared with those in IEC61508 part 6 and Ref. [Zhang T, Long W, Sato Y. Availability of systems with self-diagnostic components-applying Markov model to IEC 61508-6. Reliab Eng System Saf 2003;80(2):133-41]. An interesting outcome can be realized from the comparison. Furthermore, although differences in MDT of voted groups exist between IEC 61508-6 and this paper, PFD avg of voted groups are comparatively close. With detailed description, the method of RBD presented can be applied to the quantitative SIL verification, showing a similarity of the method in IEC 61508-6

  8. Comparison of Two-Block Decomposition Method and Chebyshev Rational Approximation Method for Depletion Calculation

    International Nuclear Information System (INIS)

    Lee, Yoon Hee; Cho, Nam Zin

    2016-01-01

    The code gives inaccurate results of nuclides for evaluation of source term analysis, e.g., Sr- 90, Ba-137m, Cs-137, etc. A Krylov Subspace method was suggested by Yamamoto et al. The method is based on the projection of solution space of Bateman equation to a lower dimension of Krylov subspace. It showed good accuracy in the detailed burnup chain calculation if dimension of the Krylov subspace is high enough. In this paper, we will compare the two methods in terms of accuracy and computing time. In this paper, two-block decomposition (TBD) method and Chebyshev rational approximation method (CRAM) are compared in the depletion calculations. In the two-block decomposition method, according to the magnitude of effective decay constant, the system of Bateman equation is decomposed into short- and longlived blocks. The short-lived block is calculated by the general Bateman solution and the importance concept. Matrix exponential with smaller norm is used in the long-lived block. In the Chebyshev rational approximation, there is no decomposition of the Bateman equation system, and the accuracy of the calculation is determined by the order of expansion in the partial fraction decomposition of the rational form. The coefficients in the partial fraction decomposition are determined by a Remez-type algorithm.

  9. Comparison of Two-Block Decomposition Method and Chebyshev Rational Approximation Method for Depletion Calculation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yoon Hee; Cho, Nam Zin [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The code gives inaccurate results of nuclides for evaluation of source term analysis, e.g., Sr- 90, Ba-137m, Cs-137, etc. A Krylov Subspace method was suggested by Yamamoto et al. The method is based on the projection of solution space of Bateman equation to a lower dimension of Krylov subspace. It showed good accuracy in the detailed burnup chain calculation if dimension of the Krylov subspace is high enough. In this paper, we will compare the two methods in terms of accuracy and computing time. In this paper, two-block decomposition (TBD) method and Chebyshev rational approximation method (CRAM) are compared in the depletion calculations. In the two-block decomposition method, according to the magnitude of effective decay constant, the system of Bateman equation is decomposed into short- and longlived blocks. The short-lived block is calculated by the general Bateman solution and the importance concept. Matrix exponential with smaller norm is used in the long-lived block. In the Chebyshev rational approximation, there is no decomposition of the Bateman equation system, and the accuracy of the calculation is determined by the order of expansion in the partial fraction decomposition of the rational form. The coefficients in the partial fraction decomposition are determined by a Remez-type algorithm.

  10. A novel partitioning method for block-structured adaptive meshes

    Science.gov (United States)

    Fu, Lin; Litvinov, Sergej; Hu, Xiangyu Y.; Adams, Nikolaus A.

    2017-07-01

    We propose a novel partitioning method for block-structured adaptive meshes utilizing the meshless Lagrangian particle concept. With the observation that an optimum partitioning has high analogy to the relaxation of a multi-phase fluid to steady state, physically motivated model equations are developed to characterize the background mesh topology and are solved by multi-phase smoothed-particle hydrodynamics. In contrast to well established partitioning approaches, all optimization objectives are implicitly incorporated and achieved during the particle relaxation to stationary state. Distinct partitioning sub-domains are represented by colored particles and separated by a sharp interface with a surface tension model. In order to obtain the particle relaxation, special viscous and skin friction models, coupled with a tailored time integration algorithm are proposed. Numerical experiments show that the present method has several important properties: generation of approximately equal-sized partitions without dependence on the mesh-element type, optimized interface communication between distinct partitioning sub-domains, continuous domain decomposition which is physically localized and implicitly incremental. Therefore it is particularly suitable for load-balancing of high-performance CFD simulations.

  11. A novel partitioning method for block-structured adaptive meshes

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Lin, E-mail: lin.fu@tum.de; Litvinov, Sergej, E-mail: sergej.litvinov@aer.mw.tum.de; Hu, Xiangyu Y., E-mail: xiangyu.hu@tum.de; Adams, Nikolaus A., E-mail: nikolaus.adams@tum.de

    2017-07-15

    We propose a novel partitioning method for block-structured adaptive meshes utilizing the meshless Lagrangian particle concept. With the observation that an optimum partitioning has high analogy to the relaxation of a multi-phase fluid to steady state, physically motivated model equations are developed to characterize the background mesh topology and are solved by multi-phase smoothed-particle hydrodynamics. In contrast to well established partitioning approaches, all optimization objectives are implicitly incorporated and achieved during the particle relaxation to stationary state. Distinct partitioning sub-domains are represented by colored particles and separated by a sharp interface with a surface tension model. In order to obtain the particle relaxation, special viscous and skin friction models, coupled with a tailored time integration algorithm are proposed. Numerical experiments show that the present method has several important properties: generation of approximately equal-sized partitions without dependence on the mesh-element type, optimized interface communication between distinct partitioning sub-domains, continuous domain decomposition which is physically localized and implicitly incremental. Therefore it is particularly suitable for load-balancing of high-performance CFD simulations.

  12. Interconnection blocks: a method for providing reusable, rapid, multiple, aligned and planar microfluidic interconnections

    DEFF Research Database (Denmark)

    Sabourin, David; Snakenborg, Detlef; Dufva, Hans Martin

    2009-01-01

    In this paper a method is presented for creating 'interconnection blocks' that are re-usable and provide multiple, aligned and planar microfluidic interconnections. Interconnection blocks made from polydimethylsiloxane allow rapid testing of microfluidic chips and unobstructed microfluidic observ...

  13. Properties of the block BFGS update and its application to the limited-memory block BNS method for unconstrained minimization

    Czech Academy of Sciences Publication Activity Database

    Vlček, Jan; Lukšan, Ladislav

    Online: 02 April (2018) ISSN 1017-1398 R&D Projects: GA ČR GA13-06684S Institutional support: RVO:67985807 Keywords : Unconstrained minimization * Block variable metric methods * Limited-memory methods * BFGS update * Global convergence * Numerical results Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics Impact factor: 1.241, year: 2016

  14. Comparison of the Efficacy and Duration of Three Different Methods of Digital Block

    Directory of Open Access Journals (Sweden)

    M Dehghani

    2007-07-01

    Full Text Available Introduction & Objective: Finger injuries are very common and majority of them can be treated under digital block anesthesia. Traditional digital block is one of the most commonly performed blocks performed by care providers in several medical fields. There are two other less known methods, transthecal (pulley block, in which local anesthesia is injected into the flexor tendon sheat that needs less volume of anesthesia and hasnot neurovascular complications and subcutaneous block in which local anesthesia is injected subcutaneously at the level of A1 pulley. This study aimed to compare the results of the three methods of digital block. Materials & Methods: A prospective randomized clinical trial was performed at Kashani hospital to compare the less known transthecal (pulley and subcutaneous methods with traditional digital block with regard to the length of anesthesia and need to another anesthetic method (due to insufficient anesthesia as a supplement. We divided 150 patients that were admitted to kashani hospital operating room due to finger injury, randomly, into three groups. In each group the patients were anesthetized by one of the three different methods. All blocks were performed by the same investigator. Data were analyzed by SPSS software using T test. Results: Mean length of anesthesia was 34.2 min’s in the transthecal digital block method and 34 min’s in the subcutaneous method and 33.8 min’s in the traditional digital block method. A repeat injection or local infiltration as a supplement was necessary in 5 instances (7 blocks in the traditional digital block method and 9 instances (11blocks in the subcutaneous method (p<0.05. Conclusion: Regarding fewer injections and less amount of lidocaine and no risk of damaging the neurovascular bundles and comparable length of anesthesia and no need to supplemental anesthesia, transthecal digital block is an appropriate alternative to traditional digital block and subcutaneous injection.

  15. Interconnection blocks: a method for providing reusable, rapid, multiple, aligned and planar microfluidic interconnections

    International Nuclear Information System (INIS)

    Sabourin, D; Snakenborg, D; Dufva, M

    2009-01-01

    In this paper a method is presented for creating 'interconnection blocks' that are re-usable and provide multiple, aligned and planar microfluidic interconnections. Interconnection blocks made from polydimethylsiloxane allow rapid testing of microfluidic chips and unobstructed microfluidic observation. The interconnection block method is scalable, flexible and supports high interconnection density. The average pressure limit of the interconnection block was near 5.5 bar and all individual results were well above the 2 bar threshold considered applicable to most microfluidic applications

  16. A Formal Verification Method of Function Block Diagram

    International Nuclear Information System (INIS)

    Koh, Kwang Yong; Seong, Poong Hyun; Jee, Eun Kyoung; Jeon, Seung Jae; Park, Gee Yong; Kwon, Kee Choon

    2007-01-01

    Programmable Logic Controller (PLC), an industrial computer specialized for real-time applications, is widely used in diverse control systems in chemical processing plants, nuclear power plants or traffic control systems. As a PLC is often used to implement safety, critical embedded software, rigorous safety demonstration of PLC code is necessary. Function block diagram (FBD) is a standard application programming language for the PLC and currently being used in the development of a fully-digitalized reactor protection system (RPS), which is called the IDiPS, under the KNICS project. Therefore, verification issue of FBD programs is a pressing problem, and hence is of great importance. In this paper, we propose a formal verification method of FBD programs; we defined FBD programs formally in compliance with IEC 61131-3, and then translate the programs into Verilog model, and finally the model is verified using a model checker SMV. To demonstrate the feasibility and effective of this approach, we applied it to IDiPS which currently being developed under KNICS project. The remainder of this paper is organized as follows. Section 2 briefly describes Verilog and Cadence SMV. In Section 3, we introduce FBD2V which is a tool implemented to support the proposed FBD verification framework. A summary and conclusion are provided in Section 4

  17. Census Business Builder (CBB)

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  18. Census Infographics & Visualizations

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My statistics that relate to current events, observances, holidays, and anniversaries. Census Business Builder

  19. Special Census Program

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  20. Census.gov

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  1. New method for protecting mine roadways in thin coal seams by means of prefabricated yielding blocks

    Energy Technology Data Exchange (ETDEWEB)

    Peknik, J

    1983-05-01

    The use of concrete blocks for strata control in mine roadways driven in thin coal seams is evaluated. Two types of prefabricated blocks are used: BZT blocks made of reinforced concrete and yielding elements or popilbet blocks made of a mixture of fly ash (from coal power plants) and concrete. When the popilbet blocks were used no yielding elements were necessary. Mechanical properties of blocks made of reinforced concrete were controlled by yielding elements. Mechanical properties (compression strength) of the popilbet blocks were controlled by proportion of water, cement and fly ash. The BZT and the popilbet blocks were used for strata control in mine roadways in coal seams from 60 to 80 cm thick and dip angle from 5 to 18 degrees. Use of the BZT and the popilbet blocks reduced roadway deformation by about 50% in comparison to traditional strata control methods (timber cribbings, use of waste rock, etc.). Use of the blocks is explained. The BZT and the popilbet blocks were placed in a roadway wall. Height of the block wall equaled coal seam thickness. Yielding arched steel supports and timber liners were used for strata control in the roadway. The popilbet blocks were 50% less expensive than the BZT blocks. 9 references

  2. Colfax County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  3. Otero County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  4. Socorro County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  5. Catron County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  6. 500 Cities: Census Tract Boundaries

    Data.gov (United States)

    U.S. Department of Health & Human Services — This census tract shapefile for the 500 Cities project was extracted from the Census 2010 Tiger/Line database and modified to remove portions of census tracts that...

  7. Sierra County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  8. Curry County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  9. Bernalillo County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  10. Eddy County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  11. A block variant of the GMRES method on massively parallel processors

    Energy Technology Data Exchange (ETDEWEB)

    Li, Guangye [Cray Research, Inc., Eagan, MN (United States)

    1996-12-31

    This paper presents a block variant of the GMRES method for solving general unsymmetric linear systems. This algorithm generates a transformed Hessenberg matrix by solely using block matrix operations and block data communications. It is shown that this algorithm with block size s, denoted by BVGMRES(s,m), is theoretically equivalent to the GMRES(s*m) method. The numerical results show that this algorithm can be more efficient than the standard GMRES method on a cache based single CPU computer with optimized BLAS kernels. Furthermore, the gain in efficiency is more significant on MPPs due to both efficient block operations and efficient block data communications. Our numerical results also show that in comparison to the standard GMRES method, the more PEs that are used on an MPP, the more efficient the BVGMRES(s,m) algorithm is.

  12. Census in North Vietnam

    National Research Council Canada - National Science Library

    1960-01-01

    This population census decree aims at collecting the most fundamental and accurate data on the population situation of North Vietnam to lay the foundation for all plans and public administration policies...

  13. 1980 Census Tracts (TIGER)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This data set is a vector polygon digital data structure taken from Census Bureau's TIGER/Line Files, 1994, for New Mexico. The source software used was ARC/INFO...

  14. Block Copolymer Adhesion Measured by Contact Mechanics Methods

    Science.gov (United States)

    Falsafi, A.; Bates, S.; Tirrell, M.; Pocius, A. V.

    1997-03-01

    Adhesion measurements for a series of polyolefin diblocks and triblocks are presented. These materials have poly(ethylene-propylene) or poly(ethyl-ethylene) rubbery block, and semicrystalline polyethylene block as physical crosslinker. The experiments consist of compression and decompression profiles of contact area between the samples as a function of normal load, analyzed by the JKR Theory. The samples are prepared either by formation of caps from the bulk material in melting and subsequent cooling, and/or coating them in thin films on surface modified elastic foundations of polydimethylsiloxane caps. The latter minimizes the viscoelastic losses which are dominant in the bulk of material. The effect of molecular architecture and microstructure on adhesion energy and dynamics of separation, obtained from decompression experiments, is discussed in view of their influence on molecular arrangements at the contacting surfaces.

  15. Method to produce fuel element blocks for HTR reactors

    International Nuclear Information System (INIS)

    Hrovat, M.; Rachor, L.

    1977-01-01

    The patent claim relates to one partial step of the multi-stage pressing process in the production of fuel elements. A binder resin with a softening point at least 15 0 C but preferably 25-40 0 C above the melting point of the lubricant is proposed. The pressed block is expelled from the forging die in the temperature interval between the melting point of the lubricant and the softening point of the binder resin. The purpose of the invention is that the pressed fuel element blocks are expelled from the machine tool without damage at a pressure low enough to protect the mechanical integrity of the coated fuel particles or fertile particles. (UA) [de

  16. An Improved Method to Watermark Images Sensitive to Blocking Artifacts

    OpenAIRE

    Afzel Noore

    2007-01-01

    A new digital watermarking technique for images that are sensitive to blocking artifacts is presented. Experimental results show that the proposed MDCT based approach produces highly imperceptible watermarked images and is robust to attacks such as compression, noise, filtering and geometric transformations. The proposed MDCT watermarking technique is applied to fingerprints for ensuring security. The face image and demographic text data of an individual are used as multi...

  17. Text extraction method for historical Tibetan document images based on block projections

    Science.gov (United States)

    Duan, Li-juan; Zhang, Xi-qun; Ma, Long-long; Wu, Jian

    2017-11-01

    Text extraction is an important initial step in digitizing the historical documents. In this paper, we present a text extraction method for historical Tibetan document images based on block projections. The task of text extraction is considered as text area detection and location problem. The images are divided equally into blocks and the blocks are filtered by the information of the categories of connected components and corner point density. By analyzing the filtered blocks' projections, the approximate text areas can be located, and the text regions are extracted. Experiments on the dataset of historical Tibetan documents demonstrate the effectiveness of the proposed method.

  18. Block Hybrid Collocation Method with Application to Fourth Order Differential Equations

    Directory of Open Access Journals (Sweden)

    Lee Ken Yap

    2015-01-01

    Full Text Available The block hybrid collocation method with three off-step points is proposed for the direct solution of fourth order ordinary differential equations. The interpolation and collocation techniques are applied on basic polynomial to generate the main and additional methods. These methods are implemented in block form to obtain the approximation at seven points simultaneously. Numerical experiments are conducted to illustrate the efficiency of the method. The method is also applied to solve the fourth order problem from ship dynamics.

  19. A result-driven minimum blocking method for PageRank parallel computing

    Science.gov (United States)

    Tao, Wan; Liu, Tao; Yu, Wei; Huang, Gan

    2017-01-01

    Matrix blocking is a common method for improving computational efficiency of PageRank, but the blocking rules are hard to be determined, and the following calculation is complicated. In tackling these problems, we propose a minimum blocking method driven by result needs to accomplish a parallel implementation of PageRank algorithm. The minimum blocking just stores the element which is necessary for the result matrix. In return, the following calculation becomes simple and the consumption of the I/O transmission is cut down. We do experiments on several matrixes of different data size and different sparsity degree. The results show that the proposed method has better computational efficiency than traditional blocking methods.

  20. A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

    Science.gov (United States)

    Ko, Dae-Eun

    2017-11-01

    A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

  1. Application of blocking diagnosis methods to general circulation models. Part II: model simulations

    Energy Technology Data Exchange (ETDEWEB)

    Barriopedro, D.; Trigo, R.M. [Universidade de Lisboa, CGUL-IDL, Faculdade de Ciencias, Lisbon (Portugal); Garcia-Herrera, R.; Gonzalez-Rouco, J.F. [Universidad Complutense de Madrid, Departamento de Fisica de la Tierra II, Facultad de C.C. Fisicas, Madrid (Spain)

    2010-12-15

    A previously defined automatic method is applied to reanalysis and present-day (1950-1989) forced simulations of the ECHO-G model in order to assess its performance in reproducing atmospheric blocking in the Northern Hemisphere. Unlike previous methodologies, critical parameters and thresholds to estimate blocking occurrence in the model are not calibrated with an observed reference, but objectively derived from the simulated climatology. The choice of model dependent parameters allows for an objective definition of blocking and corrects for some intrinsic model bias, the difference between model and observed thresholds providing a measure of systematic errors in the model. The model captures reasonably the main blocking features (location, amplitude, annual cycle and persistence) found in observations, but reveals a relative southward shift of Eurasian blocks and an overall underestimation of blocking activity, especially over the Euro-Atlantic sector. Blocking underestimation mostly arises from the model inability to generate long persistent blocks with the observed frequency. This error is mainly attributed to a bias in the basic state. The bias pattern consists of excessive zonal winds over the Euro-Atlantic sector and a southward shift at the exit zone of the jet stream extending into in the Eurasian continent, that are more prominent in cold and warm seasons and account for much of Euro-Atlantic and Eurasian blocking errors, respectively. It is shown that other widely used blocking indices or empirical observational thresholds may not give a proper account of the lack of realism in the model as compared with the proposed method. This suggests that in addition to blocking changes that could be ascribed to natural variability processes or climate change signals in the simulated climate, attention should be paid to significant departures in the diagnosis of phenomena that can also arise from an inappropriate adaptation of detection methods to the climate of the

  2. ASSESSMENT OF THE RURAL POPULATION TO THE RESULTS OF NATIONAL CENSUS 2002, 2010. IN THE REPUBLICS OF THE NORTH CAUCASUS: GIS APPROACHES AND METHODS

    Directory of Open Access Journals (Sweden)

    P. P. Turun

    2016-01-01

    Full Text Available The article describes the dynamics of the rural population of the North Caucasus republics in 1989–2010 analyzes the differences of census data with the results of the current account of the population over two intercensal period. For obtaining the most accurate data in the rural population applies a correction factor the results of the census are considered critical, given the problems of its implementation.

  3. Census Model Transition: Contributions to its Implementation in Portugal

    Directory of Open Access Journals (Sweden)

    Dias Carlos A.

    2016-03-01

    Full Text Available Given the high cost and complexity of traditional censuses, some countries have started to change the census process. Following this trend, Portugal is also evaluating a new census model as an alternative to an exhaustive collection of all statistical units. The main motivations for the implementation of this census model transition in Portugal are related to the decrease in statistical burden on citizens, improvements in the frequency of outputs, and the reduction of collection costs associated with census operations. This article seeks to systematise and critically review all alternatives to the traditional census methodologies, presenting their advantages and disadvantages and the countries that use them. As a result of the comparison, we conclude that the methods that best meet these objectives are those that use administrative data, either in whole or in part. We also present and discuss the results of an inventory and evaluation of administrative registers in Portugal with the potential to produce statistical census information.

  4. A Block-Asynchronous Relaxation Method for Graphics Processing Units

    OpenAIRE

    Anzt, H.; Dongarra, J.; Heuveline, Vincent; Tomov, S.

    2011-01-01

    In this paper, we analyze the potential of asynchronous relaxation methods on Graphics Processing Units (GPUs). For this purpose, we developed a set of asynchronous iteration algorithms in CUDA and compared them with a parallel implementation of synchronous relaxation methods on CPU-based systems. For a set of test matrices taken from the University of Florida Matrix Collection we monitor the convergence behavior, the average iteration time and the total time-to-solution time. Analyzing the r...

  5. Building block synthesis using the polymerase chain assembly method.

    Science.gov (United States)

    Marchand, Julie A; Peccoud, Jean

    2012-01-01

    De novo gene synthesis allows the creation of custom DNA molecules without the typical constraints of traditional cloning assembly: scars, restriction site incompatibility, and the quest to find all the desired parts to name a few. Moreover, with the help of computer-assisted design, the perfect DNA molecule can be created along with its matching sequence ready to download. The challenge is to build the physical DNA molecules that have been designed with the software. Although there are several DNA assembly methods, this section presents and describes a method using the polymerase chain assembly (PCA).

  6. CDC WONDER: Population (from Census)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Population online databases contain data from the US Census Bureau. The Census Estimates online database contains contains county-level population counts for...

  7. CDC WONDER: Population (from Census)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Population online databases contain data from the US Census Bureau. The Census Estimates online database contains county-level population counts for years 1970 -...

  8. A Fast and Effective Block Adjustment Method with Big Data

    Directory of Open Access Journals (Sweden)

    ZHENG Maoteng

    2017-02-01

    Full Text Available To deal with multi-source, complex and massive data in photogrammetry, and solve the high memory requirement and low computation efficiency of irregular normal equation caused by the randomly aligned and large scale datasets, we introduce the preconditioned conjugate gradient combined with inexact Newton method to solve the normal equation which do not have strip characteristics due to the randomly aligned images. We also use an effective sparse matrix compression format to compress the big normal matrix, a brand new workflow of bundle adjustment is developed. Our method can avoid the direct inversion of the big normal matrix, the memory requirement of the normal matrix is also decreased by the proposed sparse matrix compression format. Combining all these techniques, the proposed method can not only decrease the memory requirement of normal matrix, but also largely improve the efficiency of bundle adjustment while maintaining the same accuracy as the conventional method. Preliminary experiment results show that the bundle adjustment of a dataset with about 4500 images and 9 million image points can be done in only 15 minutes while achieving sub-pixel accuracy.

  9. CURRENT STATE ANALYSIS OF AUTOMATIC BLOCK SYSTEM DEVICES, METHODS OF ITS SERVICE AND MONITORING

    Directory of Open Access Journals (Sweden)

    A. M. Beznarytnyy

    2014-01-01

    Full Text Available Purpose. Development of formalized description of automatic block system of numerical code based on the analysis of characteristic failures of automatic block system and procedure of its maintenance. Methodology. For this research a theoretical and analytical methods have been used. Findings. Typical failures of the automatic block systems were analyzed, as well as basic reasons of failure occur were found out. It was determined that majority of failures occurs due to defects of the maintenance system. Advantages and disadvantages of the current service technology of automatic block system were analyzed. Works that can be automatized by means of technical diagnostics were found out. Formal description of the numerical code of automatic block system as a graph in the state space of the system was carried out. Originality. The state graph of the numerical code of automatic block system that takes into account gradual transition from the serviceable condition to the loss of efficiency was offered. That allows selecting diagnostic information according to attributes and increasing the effectiveness of recovery operations in the case of a malfunction. Practical value. The obtained results of analysis and proposed the state graph can be used as the basis for the development of new means of diagnosing devices for automatic block system, which in turn will improve the efficiency and service of automatic block system devices in general.

  10. Automation of block assignment planning using a diagram-based scenario modeling method

    Directory of Open Access Journals (Sweden)

    Hwang In Hyuck

    2014-03-01

    Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is be¬cause the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manu¬ally by experienced workers. In this study, a method of representing the block assignment rules using a diagram was su¬ggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

  11. Flash memory management system and method utilizing multiple block list windows

    Science.gov (United States)

    Chow, James (Inventor); Gender, Thomas K. (Inventor)

    2005-01-01

    The present invention provides a flash memory management system and method with increased performance. The flash memory management system provides the ability to efficiently manage and allocate flash memory use in a way that improves reliability and longevity, while maintaining good performance levels. The flash memory management system includes a free block mechanism, a disk maintenance mechanism, and a bad block detection mechanism. The free block mechanism provides efficient sorting of free blocks to facilitate selecting low use blocks for writing. The disk maintenance mechanism provides for the ability to efficiently clean flash memory blocks during processor idle times. The bad block detection mechanism provides the ability to better detect when a block of flash memory is likely to go bad. The flash status mechanism stores information in fast access memory that describes the content and status of the data in the flash disk. The new bank detection mechanism provides the ability to automatically detect when new banks of flash memory are added to the system. Together, these mechanisms provide a flash memory management system that can improve the operational efficiency of systems that utilize flash memory.

  12. Automation of block assignment planning using a diagram-based scenario modeling method

    Directory of Open Access Journals (Sweden)

    In Hyuck Hwang

    2014-03-01

    Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

  13. The Aggregate Dutch Historical Censuses

    NARCIS (Netherlands)

    Ashkpour, Ashkan; Meroño-Peñuela, Albert; Mandemakers, Kees

    2015-01-01

    Historical censuses have an enormous potential for research. In order to fully use this potential, harmonization of these censuses is essential. During the last decades, enormous efforts have been undertaken in digitizing the published aggregated outcomes of the Dutch historical censuses

  14. The Aggregate Dutch Historical Censuses

    NARCIS (Netherlands)

    A. Ashkpour (Ashkan); A. Meronõ-Peñuela (Albert); C.A. Mandemakers (Kees)

    2015-01-01

    textabstractHistorical censuses have an enormous potential for research. In order to fully use this potential, harmonization of these censuses is essential. During the last decades, enormous efforts have been undertaken in digitizing the published aggregated outcomes of the Dutch historical censuses

  15. Method for eliminating gas blocking in electrokinetic pumping systems

    Science.gov (United States)

    Arnold, Don W.; Paul, Phillip H.; Schoeniger, Joseph S.

    2001-09-11

    A method for eliminating gas bubble blockage of current flow during operation of an electrokinetic pump. By making use of the ability to modify the surface charge on the porous dielectric medium used in electrokinetic pumps, it becomes possible to place electrodes away from the pressurized region of the electrokinetic pump. While gas is still generated at the electrodes they are situated such that the generated gas can escape into a larger buffer reservoir and not into the high pressure region of the pump where the gas bubbles can interrupt current flow. Various combinations of porous dielectric materials and ionic conductors can be used to create pumps that have desirable electrical, material handling, and flow attributes.

  16. Modeling of Video Sequences by Gaussian Mixture: Application in Motion Estimation by Block Matching Method

    Directory of Open Access Journals (Sweden)

    Abdenaceur Boudlal

    2010-01-01

    Full Text Available This article investigates a new method of motion estimation based on block matching criterion through the modeling of image blocks by a mixture of two and three Gaussian distributions. Mixture parameters (weights, means vectors, and covariance matrices are estimated by the Expectation Maximization algorithm (EM which maximizes the log-likelihood criterion. The similarity between a block in the current image and the more resembling one in a search window on the reference image is measured by the minimization of Extended Mahalanobis distance between the clusters of mixture. Performed experiments on sequences of real images have given good results, and PSNR reached 3 dB.

  17. A Four-Step Block Hybrid Adams-Moulton Methods For The Solution ...

    African Journals Online (AJOL)

    This paper examines application of the Adam-Moulton's Method and proposes a modified self-starting continuous formula Called hybrid Adams-Moulton methods for the case k=4. It allows evaluation at both grid and off grid points to obtain the discrete schemes used in the block methods. The order, error constant and ...

  18. some generalized two-step block hybrid numerov method for solving ...

    African Journals Online (AJOL)

    Nwokem et al.

    ABSTRACT. This paper proposes a class of generalized two-step Numerov methods, a block hybrid type for the direct solution of general second order ordinary differential equations. Both the main method and additional methods were derived via interpolation and collocation procedures. The basic properties of zero ...

  19. A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear.

    Science.gov (United States)

    Qiang, Zhe; Zhang, Yuanzhong; Groff, Jesse A; Cavicchi, Kevin A; Vogt, Bryan D

    2014-08-28

    One of the key issues associated with the utilization of block copolymer (BCP) thin films in nanoscience and nanotechnology is control of their alignment and orientation over macroscopic dimensions. We have recently reported a method, solvent vapor annealing with soft shear (SVA-SS), for fabricating unidirectional alignment of cylindrical nanostructures. This method is a simple extension of the common SVA process by adhering a flat, crosslinked poly(dimethylsiloxane) (PDMS) pad to the BCP thin film. The impact of processing parameters, including annealing time, solvent removal rate and the physical properties of the PDMS pad, on the quality of alignment quantified by the Herman's orientational factor (S) is systematically examined for a model system of polystyrene-block-polyisoprene-block-polystyrene (SIS). As annealing time increases, the SIS morphology transitions from isotropic rods to highly aligned cylinders. Decreasing the rate of solvent removal, which impacts the shear rate imposed by the contraction of the PDMS, improves the orientation factor of the cylindrical domains; this suggests the nanostructure alignment is primarily induced by contraction of PDMS during solvent removal. Moreover, the physical properties of the PDMS controlled by the crosslink density impact the orientation factor by tuning its swelling extent during SVA-SS and elastic modulus. Decreasing the PDMS crosslink density increases S; this effect appears to be primarily driven by the changes in the solubility of the SVA-SS solvent in the PDMS. With this understanding of the critical processing parameters, SVA-SS has been successfully applied to align a wide variety of BCPs including polystyrene-block-polybutadiene-block-polystyrene (SBS), polystyrene-block-poly(N,N-dimethyl-n-octadecylammonium p-styrenesulfonate) (PS-b-PSS-DMODA), polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and polystyrene-block-poly(2-vinlypyridine) (PS-b-P2VP). These results suggest that SVA-SS is a generalizable

  20. Study on efficient methods for removal and treatment of graphite blocks in a gas cooled reactor

    International Nuclear Information System (INIS)

    Fujii, S.; Shirakawa, M.; Murakami, T.

    2001-01-01

    Tokai Power Station (GCR, 166 MWe) started its commercial operation on July 1966 and ceased activities at the end of March 1998 after 32 years of operation. The decommissioning plans are being developed, to prepare for near future dismantling. In the study, the methods for removal of the graphite blocks of about 1,600 ton have been developed to carrying it out safely and in a short period of time, and the methods of treatment of graphite have also been developed. All technological items have been identified for which R and D work will be required for removal from the core and treatment for disposal. (1) In order to reduce the programme required for the dismantling of reactor internals, an efficient method for removal of the graphite blocks is necessary. For this purpose the design of a dismantling machine has been investigated which can extract several blocks at a time. The conceptual design has being developed and the model has been manufactured and tested in a mock-up facility. (2) In order to reduce disposal costs, it will be necessary to segment the graphite blocks, maximising the packing density available in the disposal containers. Some of the graphite blocks will be cut into pieces longitudinally by a remote machine. Relevant technical matters have been identified, such as graphite cutting methods, the nature of fine particles arising from the cutting operation, the treatment of fine particles for disposal, and the method of mortar filling inside the waste container. (author)

  1. A rapid method of detecting motor blocks in patients with Parkinson's disease during volitional hand movements

    Directory of Open Access Journals (Sweden)

    Popović Mirjana B.

    2002-01-01

    Full Text Available INTRODUCTION An algorithm to study hand movements in patients with Parkinson's disease (PD who experience temporary, involuntary inability to move a hand have been developed. In literature, this rather enigmatic phenomenon has been described in gait, speech, handwriting and tapping, and noted as motor blocks (MB or freezing episodes. Freezing refers to transient periods in which the voluntary motor activity being attempted by an individual is paused. It is a sudden, unplanned state of immobility that appears to arise from deficits in initiating or simultaneously and sequentially executing movements, in correcting inappropriate movements or in planning movements. The clinical evaluation of motor blocks is difficult because of a variability both within and between individuals and relationship of blocks to time of drug ingestion. In literature the terms freezing, motor block or motor freezing are used in parallel. AIM In clinical settings classical manifestations of Parkinson's Disease (akinesia bradykinesia, rigidity, tremor, axial motor performance and postural instability are typically evaluated. Recently, in literature, new computerized methods are suggested for their objective assessment. We propose monitoring of motor blocks during hand movements to be integrated. For this purpose we have developed a simple method that comprises PC computer, digitizing board and custom made software. Movement analysis is "off line", and the result is the data that describe the number, duration and onset of motor blocks. METHOD Hand trajectories are assessed during simple volitional self paced point-to-point planar hand movement by cordless magnetic mouse on a digitizing board (Drawing board III, 305 x 457 mm, GTCO Cal Comp Inc, Fig. 1. Testing included 8 Parkinsonian patients and 8 normal healthy controls, age matched, with unknown neurologic motor or sensory disorders, Table 1. Three kinematic indicators of motor blocks: 1 duration (MBTJ; 2 onset (t%; and 3

  2. Method for quantifying percentage wood failure in block-shear specimens by a laser scanning profilometer

    Science.gov (United States)

    C. T. Scott; R. Hernandez; C. Frihart; R. Gleisner; T. Tice

    2005-01-01

    A new method for quantifying percentage wood failure of an adhesively bonded block-shear specimen has been developed. This method incorporates a laser displacement gage with an automated two-axis positioning system that functions as a highly sensitive profilometer. The failed specimen is continuously scanned across its width to obtain a surface failure profile. The...

  3. Normal mode analysis of macromolecular systems with the mobile block Hessian method

    International Nuclear Information System (INIS)

    Ghysels, An; Van Speybroeck, Veronique; Van Neck, Dimitri; Waroquier, Michel; Brooks, Bernard R.

    2015-01-01

    Until recently, normal mode analysis (NMA) was limited to small proteins, not only because the required energy minimization is a computationally exhausting task, but also because NMA requires the expensive diagonalization of a 3N a ×3N a matrix with N a the number of atoms. A series of simplified models has been proposed, in particular the Rotation-Translation Blocks (RTB) method by Tama et al. for the simulation of proteins. It makes use of the concept that a peptide chain or protein can be seen as a subsequent set of rigid components, i.e. the peptide units. A peptide chain is thus divided into rigid blocks with six degrees of freedom each. Recently we developed the Mobile Block Hessian (MBH) method, which in a sense has similar features as the RTB method. The main difference is that MBH was developed to deal with partially optimized systems. The position/orientation of each block is optimized while the internal geometry is kept fixed at a plausible - but not necessarily optimized - geometry. This reduces the computational cost of the energy minimization. Applying the standard NMA on a partially optimized structure however results in spurious imaginary frequencies and unwanted coordinate dependence. The MBH avoids these unphysical effects by taking into account energy gradient corrections. Moreover the number of variables is reduced, which facilitates the diagonalization of the Hessian. In the original implementation of MBH, atoms could only be part of one rigid block. The MBH is now extended to the case where atoms can be part of two or more blocks. Two basic linkages can be realized: (1) blocks connected by one link atom, or (2) by two link atoms, where the latter is referred to as the hinge type connection. In this work we present the MBH concept and illustrate its performance with the crambin protein as an example

  4. Application of blocking diagnosis methods to general circulation models. Part I: a novel detection scheme

    Energy Technology Data Exchange (ETDEWEB)

    Barriopedro, D. [Universidade de Lisboa, CGUL-IDL, Faculdade de Ciencias, Ed. C-8, Lisbon (Portugal); Universidad de Extremadura, Departamento de Fisica, Facultad de Ciencias, Badajoz (Spain); Garcia-Herrera, R. [Universidad Complutense de Madrid, Departamento de Fisica de la Tierra II, Facultad de C.C. Fisicas, Madrid (Spain); Trigo, R.M. [Universidade de Lisboa, CGUL-IDL, Faculdade de Ciencias, Ed. C-8, Lisbon (Portugal)

    2010-12-15

    This paper aims to provide a new blocking definition with applicability to observations and model simulations. An updated review of previous blocking detection indices is provided and some of their implications and caveats discussed. A novel blocking index is proposed by reconciling two traditional approaches based on anomaly and absolute flows. Blocks are considered from a complementary perspective as a signature in the anomalous height field capable of reversing the meridional jet-based height gradient in the total flow. The method succeeds in identifying 2-D persistent anomalies associated to a weather regime in the total flow with blockage of the westerlies. The new index accounts for the duration, intensity, extension, propagation, and spatial structure of a blocking event. In spite of its increased complexity, the detection efficiency of the method is improved without hampering the computational time. Furthermore, some misleading identification problems and artificial assumptions resulting from previous single blocking indices are avoided with the new approach. The characteristics of blocking for 40 years of reanalysis (1950-1989) over the Northern Hemisphere are described from the perspective of the new definition and compared to those resulting from two standard blocking indices and different critical thresholds. As compared to single approaches, the novel index shows a better agreement with reported proxies of blocking activity, namely climatological regions of simultaneous wave amplification and maximum band-pass filtered height standard deviation. An additional asset of the method is its adaptability to different data sets. As critical thresholds are specific of the data set employed, the method is useful for observations and model simulations of different resolutions, temporal lengths and time variant basic states, optimizing its value as a tool for model validation. Special attention has been paid on the devise of an objective scheme easily applicable

  5. A fast direct method for block triangular Toeplitz-like with tri-diagonal block systems from time-fractional partial differential equations

    Science.gov (United States)

    Ke, Rihuan; Ng, Michael K.; Sun, Hai-Wei

    2015-12-01

    In this paper, we study the block lower triangular Toeplitz-like with tri-diagonal blocks system which arises from the time-fractional partial differential equation. Existing fast numerical solver (e.g., fast approximate inversion method) cannot handle such linear system as the main diagonal blocks are different. The main contribution of this paper is to propose a fast direct method for solving this linear system, and to illustrate that the proposed method is much faster than the classical block forward substitution method for solving this linear system. Our idea is based on the divide-and-conquer strategy and together with the fast Fourier transforms for calculating Toeplitz matrix-vector multiplication. The complexity needs O (MNlog2 ⁡ M) arithmetic operations, where M is the number of blocks (the number of time steps) in the system and N is the size (number of spatial grid points) of each block. Numerical examples from the finite difference discretization of time-fractional partial differential equations are also given to demonstrate the efficiency of the proposed method.

  6. On a computer implementation of the block Gauss–Seidel method for normal systems of equations

    OpenAIRE

    Alexander I. Zhdanov; Ekaterina Yu. Bogdanova

    2016-01-01

    This article focuses on the modification of the block option Gauss-Seidel method for normal systems of equations, which is a sufficiently effective method of solving generally overdetermined, systems of linear algebraic equations of high dimensionality. The main disadvantage of methods based on normal equations systems is the fact that the condition number of the normal system is equal to the square of the condition number of the original problem. This fact has a negative impact on the rate o...

  7. Method for Generating Pseudorandom Sequences with the Assured Period Based on R-blocks

    Directory of Open Access Journals (Sweden)

    M. A. Ivanov

    2011-03-01

    Full Text Available The article describes the characteristics of a new class of fast-acting pseudorandom number generators, based on the use of stochastic adders or R-blocks. A new method for generating pseudorandom sequences with the assured length of period is offered.

  8. Extended block diagram method for a multi-state system reliability assessment

    International Nuclear Information System (INIS)

    Lisnianski, Anatoly

    2007-01-01

    The presented method extends the classical reliability block diagram method to a repairable multi-state system. It is very suitable for engineering applications since the procedure is well formalized and based on the natural decomposition of the entire multi-state system (the system is represented as a collection of its elements). Until now, the classical block diagram method did not provide the reliability assessment for the repairable multi-state system. The straightforward stochastic process methods are very difficult for engineering application in such cases due to the 'dimension damnation'-huge number of system states. The suggested method is based on the combined random processes and the universal generating function technique and drastically reduces the number of states in the multi-state model

  9. Methods of censusing Red fox (Vulpes vulpes populations / Metodi di censimento della Volpe (Vulpes vulpes

    Directory of Open Access Journals (Sweden)

    Juan Francisco Beltrán

    1991-07-01

    Full Text Available Abstract Estimating absolute or relative numbers in red fox populations is not an easy task. Although a range of methods has been described, neither an optimal nor a universally accepted technique has been found. Moreover, none has been tested on populations of known size. We reviewed the efficiency of fourteen indices of fox abundance classified into two groups: (a methods where individuals are captured and marked, which include ear tagging or similar conspicuous markings, toe clipping, radioactive tagging of faeces, radio-tracking, and statistics from hunting and trapping; (b methods not requiring capture, which include both direct methods (nocturnal counts, unsystematic observations, and drive censuses, and indirect methods (den counts, transects for track, scat counts, and scent stations. As a rule, statistics are rarely applicable to populations estimates. Methods involving capture are expensive but provide more accurate estimates than the second group of indices, which are not suitable for paired comparisons from one year to another. Management and wildlife specialists should have in mind such restrictions when considering their goals and the required level of accuracy. Finally, we recommend the simultaneous utilization and comparison of several methods (one from each group, as proposed in a double sampling strategy for optimum evaluations. Riassunto La valutazione della consistenza di una popolazione di Volpe, mediante censimenti assoluti o relativi, è di difficile soluzione. Tra i diversi metodi di conteggio impiegati, nessuno si è rivelato ottimale e universale. Tuttavia nessuno è stato utilizzato per popolazioni di consistenza nota. Qui esaminiamo la validità di 14 metodi impiegati per il calcolo di indici di abbondanza, ripartendoli in due gruppi: (a metodi che implicano la cattura e il marcamento degli animali mediante marche auricolari o contrassegni similari, amputazione delle falangi

  10. Synthetic Method for Oligonucleotide Block by Using Alkyl-Chain-Soluble Support.

    Science.gov (United States)

    Matsuno, Yuki; Shoji, Takao; Kim, Shokaku; Chiba, Kazuhiro

    2016-02-19

    A straightforward method for the synthesis of oligonucleotide blocks using a Cbz-type alkyl-chain-soluble support (Z-ACSS) attached to the 3'-OH group of 3'-terminal nucleosides was developed. The Z-ACSS allowed for the preparation of fully protected deoxyribo- and ribo-oligonucleotides without chromatographic purification and released dimer- to tetramer-size oligonucleotide blocks via hydrogenation using a Pd/C catalyst without significant loss or migration of protective groups such as 5'-end 4,4'-dimethoxtrityl, 2-cyanoethyl on internucleotide bonds, or 2'-TBS.

  11. Blocking Mechanism Study of Self-Compacting Concrete Based on Discrete Element Method

    Science.gov (United States)

    Zhang, Xuan; Li, Zhida; Zhang, Zhihua

    2017-11-01

    In order to study the influence factors of blocking mechanism of Self-Compaction Concrete (SCC), Roussel’s granular blocking model was verified and extended by establishing the discrete element model of SCC. The influence of different parameters on the filling capacity and blocking mechanism of SCC were also investigated. The results showed that: it was feasible to simulate the blocking mechanism of SCC by using Discrete Element Method (DEM). The passing ability of pebble aggregate was superior to the gravel aggregate and the passing ability of hexahedron particles was bigger than tetrahedron particles, while the tetrahedron particle simulation results were closer to the actual situation. The flow of SCC as another significant factor affected the passing ability that with the flow increased, the passing ability increased. The correction coefficient λ of the steel arrangement (channel section shape) and flow rate γ in the block model were introduced that the value of λ was 0.90-0.95 and the maximum casting rate was 7.8 L/min.

  12. 77 FR 39678 - Census Bureau

    Science.gov (United States)

    2012-07-05

    ... and small businesses. While these Exchanges are still in development and states have broad flexibility... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; 2013 Current Population Survey Annual Social and Economic Supplement Content Test AGENCY: U.S. Census Bureau...

  13. In Brief: Ocean life census

    Science.gov (United States)

    Showstack, Randy

    2010-10-01

    The Census of Marine Life, an international effort to assess the diversity, distribution, and abundance of marine life, issued a report on 23 September summarizing the decade­long project that the organization calls “the most comprehensive inventory of known marine life ever compiled.” The census has involved more than 2700 scientists and 670 participating institutions from more than 80 nations and territories. In addition, three books were released on 23 September that provide an overview of census insights and their implications, a summary of findings and discoveries by the 17 census projects, and portraits of about 100 species. “The Census of Marine Life is the book of oceans' nature,” census cofounder Jesse Ausubel wrote in a forward to one of the books. Ausubel is vice president of programs for the Alfred P. Sloan Foundation, which contributed $75 million to the $650 million census. “This book reports the known, unknown, and unknowable of the first Census of Marine Life. This book is about the richness of 3.5 billion years.” For more information, visit http://www.coml.org.

  14. An Angular Method with Position Control for Block Mesh Squareness Improvement

    Energy Technology Data Exchange (ETDEWEB)

    Yao, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Stillman, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-19

    We optimize a target function de ned by angular properties with a position control term for a basic stencil with a block-structured mesh, to improve element squareness in 2D and 3D. Comparison with the condition number method shows that besides a similar mesh quality regarding orthogonality can be achieved as the former does, the new method converges faster and provides a more uniform global mesh spacing in our numerical tests.

  15. Italy of censuses.

    Science.gov (United States)

    Rey, G M

    1983-06-01

    To supplement census data on Italy's economy, Istat conducted a sample survey of 2% of households. This paper reports survey findings in 3 areas: age structure of the population, employment and unemployment patterns by region, and structure of the productive system. Those over age 65 years have increased from 11% of the population in 1971 to 13% in 1981 and are forecast to constitute 14.5% in 1991. Women accounted for 51.3% of the total population in 1981 but 58.5% of those over age 65. 12% of households have a member over age 75. The 0-14 year age group has declined from 24.4% of the population in 1971 to 21.5% in 1981 and is projected to comprise 17.4% in 1991. The labor force activity rate was 39.8% in 1981. Unemployment was set at 14.7% in the census sample compared with 9.1% in Istat's quarterly survey of the labor force. 60% of the difference between these 2 figures was accounted for by Campania, Sicily, Puglia, Calabria, and Latium. These 5 regions, which account for only 30% of total employment, are the areas with the most acute employment problems and highest proportions of casual employment in agriculture and traditional services. Agriculture accounted for 22% of total unemployment, construction for 18.5%, and traditional industry for 14%--percentages that are higher than the share of total employment represented by these sectors. In the South, 20.4% of employment is in agriculture, 18.1% in industry, 12.6% in construction, and 48.9% in services. The average worker in the South supports 3.3 persons compared with 2.5 persons in the North. Survey results indicate a substantial shift in the sectoral composition of employment as well as a change in the size of productive units. There has been an increase in the highly specialized components of the economy, including services to firms. The average size of factories has declined, with a proliferation of small and medium sized units. These findings suggest a need to broaden and deepen Italy's industrial base

  16. Global Convergence of Arbitrary-Block Gradient Methods for Generalized Polyak-{\\L} ojasiewicz Functions

    KAUST Repository

    Csiba, Dominik

    2017-09-09

    In this paper we introduce two novel generalizations of the theory for gradient descent type methods in the proximal setting. First, we introduce the proportion function, which we further use to analyze all known (and many new) block-selection rules for block coordinate descent methods under a single framework. This framework includes randomized methods with uniform, non-uniform or even adaptive sampling strategies, as well as deterministic methods with batch, greedy or cyclic selection rules. Second, the theory of strongly-convex optimization was recently generalized to a specific class of non-convex functions satisfying the so-called Polyak-{\\\\L}ojasiewicz condition. To mirror this generalization in the weakly convex case, we introduce the Weak Polyak-{\\\\L}ojasiewicz condition, using which we give global convergence guarantees for a class of non-convex functions previously not considered in theory. Additionally, we establish (necessarily somewhat weaker) convergence guarantees for an even larger class of non-convex functions satisfying a certain smoothness assumption only. By combining the two abovementioned generalizations we recover the state-of-the-art convergence guarantees for a large class of previously known methods and setups as special cases of our general framework. Moreover, our frameworks allows for the derivation of new guarantees for many new combinations of methods and setups, as well as a large class of novel non-convex objectives. The flexibility of our approach offers a lot of potential for future research, as a new block selection procedure will have a convergence guarantee for all objectives considered in our framework, while a new objective analyzed under our approach will have a whole fleet of block selection rules with convergence guarantees readily available.

  17. Global Convergence of Arbitrary-Block Gradient Methods for Generalized Polyak-{\\L} ojasiewicz Functions

    KAUST Repository

    Csiba, Dominik; Richtarik, Peter

    2017-01-01

    In this paper we introduce two novel generalizations of the theory for gradient descent type methods in the proximal setting. First, we introduce the proportion function, which we further use to analyze all known (and many new) block-selection rules for block coordinate descent methods under a single framework. This framework includes randomized methods with uniform, non-uniform or even adaptive sampling strategies, as well as deterministic methods with batch, greedy or cyclic selection rules. Second, the theory of strongly-convex optimization was recently generalized to a specific class of non-convex functions satisfying the so-called Polyak-{\\L}ojasiewicz condition. To mirror this generalization in the weakly convex case, we introduce the Weak Polyak-{\\L}ojasiewicz condition, using which we give global convergence guarantees for a class of non-convex functions previously not considered in theory. Additionally, we establish (necessarily somewhat weaker) convergence guarantees for an even larger class of non-convex functions satisfying a certain smoothness assumption only. By combining the two abovementioned generalizations we recover the state-of-the-art convergence guarantees for a large class of previously known methods and setups as special cases of our general framework. Moreover, our frameworks allows for the derivation of new guarantees for many new combinations of methods and setups, as well as a large class of novel non-convex objectives. The flexibility of our approach offers a lot of potential for future research, as a new block selection procedure will have a convergence guarantee for all objectives considered in our framework, while a new objective analyzed under our approach will have a whole fleet of block selection rules with convergence guarantees readily available.

  18. Diagnostic utility of the cell block method versus the conventional smear study in pleural fluid cytology

    Directory of Open Access Journals (Sweden)

    Udasimath Shivakumarswamy

    2012-01-01

    Full Text Available Background: The cytological examinations of serous effusions have been well-accepted, and a positive diagnosis is often considered as a definitive diagnosis. It helps in staging, prognosis and management of the patients in malignancies and also gives information about various inflammatory and non-inflammatory lesions. Diagnostic problems arise in everyday practice to differentiate reactive atypical mesothelial cells and malignant cells by the routine conventional smear (CS method. Aims: To compare the morphological features of the CS method with those of the cell block (CB method and also to assess the utility and sensitivity of the CB method in the cytodiagnosis of pleural effusions. Materials and Methods: The study was conducted in the cytology section of the Department of Pathology. Sixty pleural fluid samples were subjected to diagnostic evaluation for over a period of 20 months. Along with the conventional smears, cell blocks were prepared by using 10% alcohol-formalin as a fixative agent. Statistical analysis with the ′z test′ was performed to identify the cellularity, using the CS and CB methods. Mc. Naemer′s χ2 test was used to identify the additional yield for malignancy by the CB method. Results: Cellularity and additional yield for malignancy was 15% more by the CB method. Conclusions: The CB method provides high cellularity, better architectural patterns, morphological features and an additional yield of malignant cells, and thereby, increases the sensitivity of the cytodiagnosis when compared with the CS method.

  19. Paravertebral Block: An Improved Method of Pain Control in Percutaneous Transhepatic Biliary Drainage

    International Nuclear Information System (INIS)

    Culp, William C.; McCowan, Timothy C.; DeValdenebro, Miguel; Wright, Lonnie B.; Workman, James L.; Culp, William C.

    2006-01-01

    Background and Purpose. Percutaneous transhepatic biliary drainage remains a painful procedure in many cases despite the routine use of large amounts of intravenous sedation. We present a feasibility study of thoracic paravertebral blocks in an effort to reduce pain during and following the procedure and reduce requirements for intravenous sedation. Methods. Ten consecutive patients undergoing biliary drainage procedures received fluoroscopically guided paravertebral blocks and then had supplemental intravenous sedation as required to maintain patient comfort. Levels T8-T9 and T9-T10 on the right were targeted with 10-20 ml of 0.5% bupivacaine. Sedation requirements and pain levels were recorded. Results. Ten biliary drainage procedures in 8 patients were performed for malignancy in 8 cases and for stones in 2. The mean midazolam use was 1.13 mg IV, and the mean fentanyl requirement was 60.0 μg IV in the block patients. Two episodes of hypotension, which responded promptly to volume replacement, may have been related to the block. No serious complications were encountered. The mean pain score when traversing the chest wall, liver capsule, and upon entering the bile ducts was 0.1 on a scale of 0 to 10, with 1 patient reporting a pain level of 1 and 9 reporting 0. The mean peak pain score, encountered when manipulating at the common bile duct level or when addressing stones there, was 5.4 and ranged from 0 to 10. Conclusions. Thoracic paravertebral block with intravenous sedation supplementation appears to be a feasible method of pain control during biliary interventions

  20. 2000 Census Urban Areas and Clusters

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  1. McKinley County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  2. Santa Fe County 2000 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — TIGER, TIGER/Line, and Census TIGER are registered trademarks of the Bureau of the Census. The Redistricting Census 2000 TIGER/Line files are an extract of selected...

  3. New Mexico, 2010 Census Census Tract State-based

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Kosovo 2011 Census: Contested Census within a Contested State

    Directory of Open Access Journals (Sweden)

    Mehmet Musaj

    2015-12-01

    Full Text Available This paper analyzes the census in Kosovo in 2011 with specific focus on the political implications and ethnic minority rights. A key conclusion is that this census highly influences public policy-making, and with regard to minority rights, the census data, in comparison to previous estimates and Kosovo Constitutional provisions, is not favorable to ethnic minorities. Expressing a lower number of minorities in total terms, the 2011 census explicitly reduced the representation of minorities at the central and local institutions, and consequently affected budget allocations. However, we must be aware that to some extent, because of the full boycott in the North by local Serbs, and the partial boycott in the South by the Roma and Serb communities, comparisons are limited and the data needs to be analyzed with care.

  5. Solving the Einstein constraint equations on multi-block triangulations using finite element methods

    Energy Technology Data Exchange (ETDEWEB)

    Korobkin, Oleg; Pazos, Enrique [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Aksoylu, Burak [Center for Computation and Technology, Louisiana State University, Baton Rouge, LA 70803 (United States); Holst, Michael [Department of Mathematics, University of California at San Diego 9500 Gilman Drive La Jolla, CA 92093-0112 (United States); Tiglio, Manuel [Department of Physics, University of Maryland, College Park, MD 20742 (United States)

    2009-07-21

    In order to generate initial data for nonlinear relativistic simulations, one needs to solve the Einstein constraints, which can be cast into a coupled set of nonlinear elliptic equations. Here we present an approach for solving these equations on three-dimensional multi-block domains using finite element methods. We illustrate our approach on a simple example of Brill wave initial data, with the constraints reducing to a single linear elliptic equation for the conformal factor psi. We use quadratic Lagrange elements on semi-structured simplicial meshes, obtained by triangulation of multi-block grids. In the case of uniform refinement the scheme is superconvergent at most mesh vertices, due to local symmetry of the finite element basis with respect to local spatial inversions. We show that in the superconvergent case subsequent unstructured mesh refinements do not improve the quality of our initial data. As proof of concept that this approach is feasible for generating multi-block initial data in three dimensions, after constructing the initial data we evolve them in time using a high-order finite-differencing multi-block approach and extract the gravitational waves from the numerical solution.

  6. Solving the Einstein constraint equations on multi-block triangulations using finite element methods

    International Nuclear Information System (INIS)

    Korobkin, Oleg; Pazos, Enrique; Aksoylu, Burak; Holst, Michael; Tiglio, Manuel

    2009-01-01

    In order to generate initial data for nonlinear relativistic simulations, one needs to solve the Einstein constraints, which can be cast into a coupled set of nonlinear elliptic equations. Here we present an approach for solving these equations on three-dimensional multi-block domains using finite element methods. We illustrate our approach on a simple example of Brill wave initial data, with the constraints reducing to a single linear elliptic equation for the conformal factor ψ. We use quadratic Lagrange elements on semi-structured simplicial meshes, obtained by triangulation of multi-block grids. In the case of uniform refinement the scheme is superconvergent at most mesh vertices, due to local symmetry of the finite element basis with respect to local spatial inversions. We show that in the superconvergent case subsequent unstructured mesh refinements do not improve the quality of our initial data. As proof of concept that this approach is feasible for generating multi-block initial data in three dimensions, after constructing the initial data we evolve them in time using a high-order finite-differencing multi-block approach and extract the gravitational waves from the numerical solution.

  7. Diagnostic utility of the cell block method versus the conventional smear study in pleural fluid cytology.

    Science.gov (United States)

    Shivakumarswamy, Udasimath; Arakeri, Surekha U; Karigowdar, Mahesh H; Yelikar, Br

    2012-01-01

    The cytological examinations of serous effusions have been well-accepted, and a positive diagnosis is often considered as a definitive diagnosis. It helps in staging, prognosis and management of the patients in malignancies and also gives information about various inflammatory and non-inflammatory lesions. Diagnostic problems arise in everyday practice to differentiate reactive atypical mesothelial cells and malignant cells by the routine conventional smear (CS) method. To compare the morphological features of the CS method with those of the cell block (CB) method and also to assess the utility and sensitivity of the CB method in the cytodiagnosis of pleural effusions. The study was conducted in the cytology section of the Department of Pathology. Sixty pleural fluid samples were subjected to diagnostic evaluation for over a period of 20 months. Along with the conventional smears, cell blocks were prepared by using 10% alcohol-formalin as a fixative agent. Statistical analysis with the 'z test' was performed to identify the cellularity, using the CS and CB methods. Mc. Naemer's χ(2)test was used to identify the additional yield for malignancy by the CB method. Cellularity and additional yield for malignancy was 15% more by the CB method. The CB method provides high cellularity, better architectural patterns, morphological features and an additional yield of malignant cells, and thereby, increases the sensitivity of the cytodiagnosis when compared with the CS method.

  8. Solution of axisymmetric transient inverse heat conduction problems using parameter estimation and multi block methods

    International Nuclear Information System (INIS)

    Azimi, A.; Hannani, S.K.; Farhanieh, B.

    2005-01-01

    In this article, a comparison between two iterative inverse techniques to solve simultaneously two unknown functions of axisymmetric transient inverse heat conduction problems in semi complex geometries is presented. The multi-block structured grid together with blocked-interface nodes is implemented for geometric decomposition of physical domain. Numerical scheme for solution of transient heat conduction equation is the finite element method with frontal technique to solve algebraic system of discrete equations. The inverse heat conduction problem involves simultaneous unknown time varying heat generation and time-space varying boundary condition estimation. Two parameter-estimation techniques are considered, Levenberg-Marquardt scheme and conjugate gradient method with adjoint problem. Numerically computed exact and noisy data are used for the measured transient temperature data needed in the inverse solution. The results of the present study for a configuration including two joined disks with different heights are compared to those of exact heat source and temperature boundary condition, and show good agreement. (author)

  9. HomeView Census Map Service, Region 9, 2012, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — Map of various Census - related information from 2000. Data include Tracts (Population Density), Block groups, and the Social Vulnerability Index from Arizona.

  10. On a computer implementation of the block Gauss–Seidel method for normal systems of equations

    Directory of Open Access Journals (Sweden)

    Alexander I. Zhdanov

    2016-12-01

    Full Text Available This article focuses on the modification of the block option Gauss-Seidel method for normal systems of equations, which is a sufficiently effective method of solving generally overdetermined, systems of linear algebraic equations of high dimensionality. The main disadvantage of methods based on normal equations systems is the fact that the condition number of the normal system is equal to the square of the condition number of the original problem. This fact has a negative impact on the rate of convergence of iterative methods based on normal equations systems. To increase the speed of convergence of iterative methods based on normal equations systems, for solving ill-conditioned problems currently different preconditioners options are used that reduce the condition number of the original system of equations. However, universal preconditioner for all applications does not exist. One of the effective approaches that improve the speed of convergence of the iterative Gauss–Seidel method for normal systems of equations, is to use its version of the block. The disadvantage of the block Gauss–Seidel method for production systems is the fact that it is necessary to calculate the pseudoinverse matrix for each iteration. We know that finding the pseudoinverse is a difficult computational procedure. In this paper, we propose a procedure to replace the matrix pseudo-solutions to the problem of normal systems of equations by Cholesky. Normal equations arising at each iteration of Gauss–Seidel method, have a relatively low dimension compared to the original system. The results of numerical experimentation demonstrating the effectiveness of the proposed approach are given.

  11. Census 2000 Places (cen00pl02)

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  12. A variational EM method for pole-zero modeling of speech with mixed block sparse and Gaussian excitation

    DEFF Research Database (Denmark)

    Shi, Liming; Nielsen, Jesper Kjær; Jensen, Jesper Rindom

    2017-01-01

    The modeling of speech can be used for speech synthesis and speech recognition. We present a speech analysis method based on pole-zero modeling of speech with mixed block sparse and Gaussian excitation. By using a pole-zero model, instead of the all-pole model, a better spectral fitting can...... be expected. Moreover, motivated by the block sparse glottal flow excitation during voiced speech and the white noise excitation for unvoiced speech, we model the excitation sequence as a combination of block sparse signals and white noise. A variational EM (VEM) method is proposed for estimating...... in reconstructing of the block sparse excitation....

  13. Cibola County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Lincoln County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Sandoval County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Eddy County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Socorro County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Harding County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. Grant County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Roosevelt County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Lincoln County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Harding County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Union County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Taos County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Guadalupe County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Luna County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Catron County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Hidalgo County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. Otero County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Curry County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. Chaves County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. New Mexico, 2010 Census Place

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Allegheny County Jail Daily Census

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A daily census of the inmates at the Allegheny County Jail (ACJ). Includes gender, race, age at booking, and current age. The records for each month contain a...

  14. Grant County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Luna County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Taos County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Hidalgo County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Mora County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. Torrance County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Colfax County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Chaves County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Lea County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Guadalupe County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Lincoln County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Bernalillo County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Torrance County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Sierra County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Mora County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. Bernalillo County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Otero County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. Quay County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. Union County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Sandoval County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Socorro County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Valencia County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Taos County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Bernalillo County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Torrance County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. Socorro County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Sierra County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Lea County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Cibola County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. Roosevelt County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. Sandoval County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Hidalgo County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Valencia County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  7. Grant County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Eddy County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  9. Sierra County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Chaves County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. Union County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. Lea County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Otero County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Valencia County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. Curry County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Quay County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Quay County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Tortugas Reef Fish Census (CRCP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a long term data set collecting visual census transect data on reef fishes at staions located at Rileys Hump, Tortugas South Ecological Reservee.

  19. Luna County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. Colfax County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Mora County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Catron County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. 3D seismic modeling and reverse‐time migration with the parallel Fourier method using non‐blocking collective communications

    KAUST Repository

    Chu, Chunlei

    2009-01-01

    The major performance bottleneck of the parallel Fourier method on distributed memory systems is the network communication cost. In this study, we investigate the potential of using non‐blocking all‐to‐all communications to solve this problem by overlapping computation and communication. We present the runtime comparison of a 3D seismic modeling problem with the Fourier method using non‐blocking and blocking calls, respectively, on a Linux cluster. The data demonstrate that a performance improvement of up to 40% can be achieved by simply changing blocking all‐to‐all communication calls to non‐blocking ones to introduce the overlapping capability. A 3D reverse‐time migration result is also presented as an extension to the modeling work based on non‐blocking collective communications.

  4. Utilizing the virus-induced blocking of apoptosis in an easy baculovirus titration method.

    Science.gov (United States)

    Niarchos, Athanasios; Lagoumintzis, George; Poulas, Konstantinos

    2015-10-22

    Baculovirus-mediated protein expression is a robust experimental technique for producing recombinant higher-eukaryotic proteins because it combines high yields with considerable post-translational modification capabilities. In this expression system, the determination of the titer of recombinant baculovirus stocks is important to achieve the correct multiplicity of infection for effective amplification of the virus and high expression of the target protein. To overcome the drawbacks of existing titration methods (e.g., plaque assay, real-time PCR), we present a simple and reliable assay that uses the ability of baculoviruses to block apoptosis in their host cells to accurately titrate virus samples. Briefly, after incubation with serial dilutions of baculovirus samples, Sf9 cells were UV irradiated and, after apoptosis induction, they were viewed via microscopy; the presence of cluster(s) of infected cells as islets indicated blocked apoptosis. Subsequently, baculovirus titers were calculated through the determination of the 50% endpoint dilution. The method is simple, inexpensive, and does not require unique laboratory equipment, consumables or expertise; moreover, it is versatile enough to be adapted for the titration of every virus species that can block apoptosis in any culturable host cells which undergo apoptosis under specific conditions.

  5. An efficient, block-by-block algorithm for inverting a block tridiagonal, nearly block Toeplitz matrix

    International Nuclear Information System (INIS)

    Reuter, Matthew G; Hill, Judith C

    2012-01-01

    We present an algorithm for computing any block of the inverse of a block tridiagonal, nearly block Toeplitz matrix (defined as a block tridiagonal matrix with a small number of deviations from the purely block Toeplitz structure). By exploiting both the block tridiagonal and the nearly block Toeplitz structures, this method scales independently of the total number of blocks in the matrix and linearly with the number of deviations. Numerical studies demonstrate this scaling and the advantages of our method over alternatives.

  6. Semi-empirical equivalent field method for dose determination in midline block fields for cobalt - 60 beam

    International Nuclear Information System (INIS)

    Tagoe, S.N.A.; Nani, E.K.; Yarney, J.; Edusa, C.; Quayson-Sackey, K.; Nyamadi, K.M.; Sasu, E.

    2012-01-01

    For teletherapy treatment time calculations, midline block fields are resolved into two fields, but neglecting scattering from other fields, the effective equivalent square field size of the midline block is assumed to the resultant field. Such approach is underestimation, and may be detrimental in achieving the recommended uncertainty of ± 5 % for patient's radiation dose delivery. By comparison, the deviations of effective equivalent square field sizes by calculations and experiments were within 13.2 % for cobalt 60 beams of GWGP80 cobalt 60 teletherapy. Therefore, a modified method incorporating the scatter contributions was adopted to estimate the effective equivalent square field size for midline block field. The measured outputs of radiation beams with the block were compared with outputs of square fields without the blocks (only the block tray) at depths of 5 and 10 cm for the teletherapy machine employing isocentric technique, and the accuracy was within ± 3 % for the cobalt 60 beams. (au)

  7. [The need to develop demographic census systems for Latin America].

    Science.gov (United States)

    Silva, A

    1987-01-01

    The author presents the case for developing new software packages specifically designed to process population census information for Latin America. The focus is on the problems faced by developing countries in handling vast amounts of data in an efficient way. First, the basic methods of census data processing are discussed, then brief descriptions of some of the available software are included. Finally, ways in which data processing programs could be geared toward and utilized for improving the accuracy of Latin American censuses in the 1990s are proposed.

  8. Federal census of the population in Switzerland

    CERN Multimedia

    DG Unit

    2011-01-01

    A federal census of the 2010 population has been underway since January 2011. The objective is to provide important insights into the composition of the resident population, households and families in Switzerland and identify trends. The census methods have been modernised so that it covers only information that is not already contained in Federal, Cantonal and municipal registries of persons; the information will be gathered via questionnaires issued to approximately 3% of the population residing in Switzerland. In order to obtain representative information about the local population, the Canton of Geneva has requested that questionnaires be issued to international civil servants and members of their families aged 15 and over who live in the Canton. They will be invited to respond to the questionnaire on a strictly voluntary basis. If they choose not to respond to the questionnaire, they will not be contacted again. The Permanent Swiss Mission to the International Organizations in Geneva wishes in advance t...

  9. SVM-PB-Pred: SVM based protein block prediction method using sequence profiles and secondary structures.

    Science.gov (United States)

    Suresh, V; Parthasarathy, S

    2014-01-01

    We developed a support vector machine based web server called SVM-PB-Pred, to predict the Protein Block for any given amino acid sequence. The input features of SVM-PB-Pred include i) sequence profiles (PSSM) and ii) actual secondary structures (SS) from DSSP method or predicted secondary structures from NPS@ and GOR4 methods. There were three combined input features PSSM+SS(DSSP), PSSM+SS(NPS@) and PSSM+SS(GOR4) used to test and train the SVM models. Similarly, four datasets RS90, DB433, LI1264 and SP1577 were used to develop the SVM models. These four SVM models developed were tested using three different benchmarking tests namely; (i) self consistency, (ii) seven fold cross validation test and (iii) independent case test. The maximum possible prediction accuracy of ~70% was observed in self consistency test for the SVM models of both LI1264 and SP1577 datasets, where PSSM+SS(DSSP) input features was used to test. The prediction accuracies were reduced to ~53% for PSSM+SS(NPS@) and ~43% for PSSM+SS(GOR4) in independent case test, for the SVM models of above two same datasets. Using our method, it is possible to predict the protein block letters for any query protein sequence with ~53% accuracy, when the SP1577 dataset and predicted secondary structure from NPS@ server were used. The SVM-PB-Pred server can be freely accessed through http://bioinfo.bdu.ac.in/~svmpbpred.

  10. Nanoparticle packing within block copolymer micelles prepared by the interfacial instability method.

    Science.gov (United States)

    Nabar, Gauri M; Winter, Jessica O; Wyslouzil, Barbara E

    2018-05-02

    The interfacial instability method has emerged as a viable approach for encapsulating high concentrations of nanoparticles (NPs) within morphologically diverse micelles. In this method, transient interfacial instabilities at the surface of an emulsion droplet guide self-assembly of block co-polymers and NP encapsulants. Although used by many groups, there are no systematic investigations exploring the relationship between NP properties and micelle morphology. Here, the effect of quantum dot (QD) and superparamagnetic iron oxide NP (SPION) concentration on the shape, size, and surface deformation of initially spherical poly(styrene-b-ethylene oxide) (PS-b-PEO) micelles was examined. Multi-NP encapsulation and uniform dispersion within micelles was obtained even at low NP concentrations. Increasing NP concentration initially resulted in larger numbers of elongated micelles and cylinders with tightly-controlled diameters smaller than those of spherical micelles. Beyond a critical NP concentration, micelle formation was suppressed; the dominant morphology became densely-loaded NP structures that were coated with polymer and exhibited increased polydispersity. Transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS) revealed that NPs in densely-loaded structures can be well-ordered, with packing volume fractions of up to 24%. These effects were enhanced in magnetic composites, possibly by dipole interactions. Mechanisms governing phase transitions triggered by NP loading in the interfacial instability process were proposed. The current study helps establish and elucidate the active role played by NPs in directing block copolymer assembly in the interfacial instability process, and provides important guiding principles for the use of this approach in generating NP-loaded block copolymer composites.

  11. Optimization of axial enrichment distribution for BWR fuels using scoping libraries and block coordinate descent method

    Energy Technology Data Exchange (ETDEWEB)

    Tung, Wu-Hsiung, E-mail: wstong@iner.gov.tw; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

    2017-03-15

    Highlights: • An optimization method for axial enrichment distribution in a BWR fuel was developed. • Block coordinate descent method is employed to search for optimal solution. • Scoping libraries are used to reduce computational effort. • Optimization search space consists of enrichment difference parameters. • Capability of the method to find optimal solution is demonstrated. - Abstract: An optimization method has been developed to search for the optimal axial enrichment distribution in a fuel assembly for a boiling water reactor core. The optimization method features: (1) employing the block coordinate descent method to find the optimal solution in the space of enrichment difference parameters, (2) using scoping libraries to reduce the amount of CASMO-4 calculation, and (3) integrating a core critical constraint into the objective function that is used to quantify the quality of an axial enrichment design. The objective function consists of the weighted sum of core parameters such as shutdown margin and critical power ratio. The core parameters are evaluated by using SIMULATE-3, and the cross section data required for the SIMULATE-3 calculation are generated by using CASMO-4 and scoping libraries. The application of the method to a 4-segment fuel design (with the highest allowable segment enrichment relaxed to 5%) demonstrated that the method can obtain an axial enrichment design with improved thermal limit ratios and objective function value while satisfying the core design constraints and core critical requirement through the use of an objective function. The use of scoping libraries effectively reduced the number of CASMO-4 calculation, from 85 to 24, in the 4-segment optimization case. An exhausted search was performed to examine the capability of the method in finding the optimal solution for a 4-segment fuel design. The results show that the method found a solution very close to the optimum obtained by the exhausted search. The number of

  12. 3D seismic modeling and reverse‐time migration with the parallel Fourier method using non‐blocking collective communications

    KAUST Repository

    Chu, Chunlei; Stoffa, Paul L.; Seif, Roustam

    2009-01-01

    The major performance bottleneck of the parallel Fourier method on distributed memory systems is the network communication cost. In this study, we investigate the potential of using non‐blocking all‐to‐all communications to solve this problem

  13. A Block Coordinate Descent Method for Multi-Convex Optimization with Applications to Nonnegative Tensor Factorization and Completion

    Science.gov (United States)

    2012-08-01

    Sciandrone, On the convergence of the block nonlinear Gauss - Seidel method under convex constraints , Oper. Res. Lett., 26 (2000), pp. 127–136. [23] S.P...include nonsmooth functions. Our main interest is the block coordinate descent (BCD) method of the Gauss - Seidel type, which mini- mizes F cyclically over...original objective around the current iterate . They do not use extrapolation either and only have subsequence convergence . There are examples of ri

  14. Comparison of 2010 Census Nonresponse Follow-Up Proxy Responses with Administrative Records Using Census Coverage Measurement Results

    Directory of Open Access Journals (Sweden)

    Mulry Mary H.

    2017-06-01

    Full Text Available The U.S. Census Bureau is currently conducting research on ways to use administrative records to reduce the cost and improve the quality of the 2020 Census Nonresponse Followup (NRFU at addresses that do not self-respond electronically or by mail. Previously, when a NRFU enumerator was unable to contact residents at an address, he/she found a knowledgeable person, such as a neighbor or apartment manager, who could provide the census information for the residents. This was called a proxy response. The Census Bureau’s recent advances in merging federal and third-party databases raise the question: Are proxy responses for NRFU addresses more accurate than the administrative records available for the housing unit? Our study attempts to answer this question by comparing the quality of proxy responses and the administrative records for those housing units in the same timeframe using the results of 2010 Census Coverage Measurement (CCM Program. The assessment of the quality of the proxy responses and the administrative records in the CCM sample of block clusters takes advantage of the extensive fieldwork, processing, and clerical matching conducted for the CCM.

  15. EnviroAtlas - Phoenix, AZ - Block Groups

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset is the base layer for the Phoenix, AZ EnviroAtlas area. The block groups are from the US Census Bureau and are included/excluded based on...

  16. EnviroAtlas - Fresno, CA - Block Groups

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset is the base layer for the Fresno, CA EnviroAtlas area. The block groups are from the US Census Bureau and are included/excluded based on...

  17. EnviroAtlas - Cleveland, OH - Block Groups

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset is the base layer for the Cleveland, OH EnviroAtlas community. The block groups are from the US Census Bureau and are included/excluded...

  18. System and method for crystalline sheet growth using a cold block and gas jet

    Science.gov (United States)

    Kellerman, Peter L.; Mackintosh, Brian; Carlson, Frederick M.; Morrell, David; Moradian, Ala; Desai, Nandish; Sun, Dawei; Sinclair, Frank

    2018-05-01

    A crystallizer for growing a crystalline sheet from a melt may include a cold block having a cold block surface that faces an exposed surface of the melt, the cold block configured to generate a cold block temperature at the cold block surface that is lower than a melt temperature of the melt at the exposed surface. The system may also include a nozzle disposed within the cold block and configured to deliver a gas jet to the exposed surface, wherein the gas jet and the cold block are interoperative to generate a process zone that removes heat from the exposed surface at a first heat removal rate that is greater than a second heat removal rate from the exposed surface in outer regions outside of the process zone.

  19. Effects of environmental amenities and locational disamenities on home values in the Santa Cruz watershed: a hedonic analysis using census data

    Science.gov (United States)

    Arora, Gaurav; Frisvold, George; Norman, Laura

    2014-01-01

    For this study, we used the hedonic pricing method to measure the effects of natural amenities on home prices in the U.S-side of the Santa Cruz Watershed. We employed multivariate spatial regression techniques to estimate how difference factors affect median home values in 613 census block groups of the 2000 Census, accounting for spatial autocorrelation, spatial lags, and/or spatial heterogeneity in the data. Diagnostic tests suggest that failure to account for the hedonic model can be classified as (1) physical features of the housing stock, (2) neighborhood characteristics, and (3) environmental attributes. Census data was combined with GIS data for vegetation and land cover, land administration, measures of species richness and open space, and proximity to amenities and disamenities. Census block groups close to the US-Mexico border of airports/air bases were negative. Results suggest that policies to maintain biodiversity and open space provide economic benefits to homeowners, reflected in higher home values. Future research will quantify the marginal effects of regression explanatory variables on home values to assess their economic and policy significant. These marginal effects will be used as input indicators to discern potential economic impacts of various scenarios in the Santa Cruz Watershed Ecosystem Portfolio Model (SCWEPM). Future research will also expand this effort into the Mexican-portion of the watershed.

  20. Accelerated perturbation-resilient block-iterative projection methods with application to image reconstruction.

    Science.gov (United States)

    Nikazad, T; Davidi, R; Herman, G T

    2012-03-01

    We study the convergence of a class of accelerated perturbation-resilient block-iterative projection methods for solving systems of linear equations. We prove convergence to a fixed point of an operator even in the presence of summable perturbations of the iterates, irrespective of the consistency of the linear system. For a consistent system, the limit point is a solution of the system. In the inconsistent case, the symmetric version of our method converges to a weighted least squares solution. Perturbation resilience is utilized to approximate the minimum of a convex functional subject to the equations. A main contribution, as compared to previously published approaches to achieving similar aims, is a more than an order of magnitude speed-up, as demonstrated by applying the methods to problems of image reconstruction from projections. In addition, the accelerated algorithms are illustrated to be better, in a strict sense provided by the method of statistical hypothesis testing, than their unaccelerated versions for the task of detecting small tumors in the brain from X-ray CT projection data.

  1. A robust, efficient and flexible method for staining myelinated axons in blocks of brain tissue.

    Science.gov (United States)

    Wahlsten, Douglas; Colbourne, Frederick; Pleus, Richard

    2003-03-15

    Previous studies have demonstrated the utility of the gold chloride method for en bloc staining of a bisected brain in mice and rats. The present study explores several variations in the method, assesses its reliability, and extends the limits of its application. We conclude that the method is very efficient, highly robust, sufficiently accurate for most purposes, and adaptable to many morphometric measures. We obtained acceptable staining of commissures in every brain, despite a wide variety of fixation methods. One-half could be stained 24 h after the brain was extracted and the other half could be stained months later. When staining failed because of an exhausted solution, the brain could be stained successfully in fresh solution. Relatively small changes were found in the sizes of commissures several weeks after initial fixation or staining. A half brain stained to reveal the mid-sagittal section could then be sectioned coronally and stained again in either gold chloride for myelin or cresyl violet for Nissl substance. Uncertainty, arising from pixelation of digitized images was far less than errors arising from human judgments about the histological limits of major commissures. Useful data for morphometric analysis were obtained by scanning the surface of a gold chloride stained block of brain with an inexpensive flatbed scanner.

  2. A Trigonometrically Fitted Block Method for Solving Oscillatory Second-Order Initial Value Problems and Hamiltonian Systems

    Directory of Open Access Journals (Sweden)

    F. F. Ngwane

    2017-01-01

    Full Text Available In this paper, we present a block hybrid trigonometrically fitted Runge-Kutta-Nyström method (BHTRKNM, whose coefficients are functions of the frequency and the step-size for directly solving general second-order initial value problems (IVPs, including Hamiltonian systems such as the energy conserving equations and systems arising from the semidiscretization of partial differential equations (PDEs. Four discrete hybrid formulas used to formulate the BHTRKNM are provided by a continuous one-step hybrid trigonometrically fitted method with an off-grid point. We implement BHTRKNM in a block-by-block fashion; in this way, the method does not suffer from the disadvantages of requiring starting values and predictors which are inherent in predictor-corrector methods. The stability property of the BHTRKNM is discussed and the performance of the method is demonstrated on some numerical examples to show accuracy and efficiency advantages.

  3. Methods for estimating wake flow and effluent dispersion near simple block-like buildings

    International Nuclear Information System (INIS)

    Hosker, R.P. Jr.

    1981-05-01

    This report is intended as an interim guide for those who routinely face air quality problems associated with near-building exhaust stack placement and height, and the resulting concentration patterns. Available data and methods for estimating wake flow and effluent dispersion near isolated block-like structures are consolidated. The near-building and wake flows are described, and quantitative estimates for frontal eddy size, height and extent of roof and wake cavities, and far wake behavior are provided. Concentration calculation methods for upwind, near-building, and downwind pollutant sources are given. For an upwind source, it is possible to estimate the required stack height, and to place upper limits on the likely near-building concentration. The influences of near-building source location and characteristics relative to the building geometry and orientation are considered. Methods to estimate effective stack height, upper limits for concentration due to flush roof vents, and the effect of changes in rooftop stack height are summarized. Current wake and wake cavity models are presented. Numerous graphs of important expressions have been prepared to facilitate computations and quick estimates of flow patterns and concentration levels for specific simple buildings. Detailed recommendations for additional work are given

  4. A block-iterative nodal integral method for forced convection problems

    International Nuclear Information System (INIS)

    Decker, W.J.; Dorning, J.J.

    1992-01-01

    A new efficient iterative nodal integral method for the time-dependent two- and three-dimensional incompressible Navier-Stokes equations has been developed. Using the approach introduced by Azmy and Droning to develop nodal mehtods with high accuracy on coarse spatial grids for two-dimensional steady-state problems and extended to coarse two-dimensional space-time grids by Wilson et al. for thermal convection problems, we have developed a new iterative nodal integral method for the time-dependent Navier-Stokes equations for mechanically forced convection. A new, extremely efficient block iterative scheme is employed to invert the Jacobian within each of the Newton-Raphson iterations used to solve the final nonlinear discrete-variable equations. By taking advantage of the special structure of the Jacobian, this scheme greatly reduces memory requirements. The accuracy of the overall method is illustrated by appliying it to the time-dependent version of the classic two-dimensional driven cavity problem of computational fluid dynamics

  5. 2010 Census Blocks with Geographic Codes Southwestern PA

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This file can be used as a tool to append geographic codes to geocoded point data. The file was developed by Pitt's Center for Social and Urban Research and...

  6. VT Wireline Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  7. VT Cable Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  8. VT Total Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  9. VT Cable Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  10. VT Detailed Broadband Availability by Census Block -12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  11. VT Detailed Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  12. VT Detailed Broadband Availability by Census Block -12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  13. VT Detailed Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  14. VT Wireline Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  15. VT Wireless Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  16. VT Total Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  17. VT Wireline Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  18. VT Wireless Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  19. VT Total Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  20. VT Cable Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  1. VT Wireless Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  2. VT Detailed Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  3. VT Total Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  4. VT DSL Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  5. VT Wireline Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  6. VT DSL Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  7. VT Wireless Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  8. VT Wireless Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  9. VT DSL Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  10. VT Cable Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  11. VT Wireline Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  12. VT Cable Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  13. VT Wireless Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  14. VT DSL Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  15. VT Wireline Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  16. VT Cable Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  17. VT Total Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  18. VT Detailed Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  19. VT DSL Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  20. VT DSL Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  1. VT Total Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  2. Modelling and Analysis of the Excavation Phase by the Theory of Blocks Method of Tunnel 4 Kherrata Gorge, Algeria

    Science.gov (United States)

    Boukarm, Riadh; Houam, Abdelkader; Fredj, Mohammed; Boucif, Rima

    2017-12-01

    The aim of our work is to check the stability during excavation tunnel work in the rock mass of Kherrata, connecting the cities of Bejaia to Setif. The characterization methods through the Q system (method of Barton), RMR (Bieniawski classification) allowed us to conclude that the quality of rock mass is average in limestone, and poor in fractured limestone. Then modelling of excavation phase using the theory of blocks method (Software UNWEDGE) with the parameters from the recommendations of classification allowed us to check stability and to finally conclude that the use of geomechanical classification and the theory of blocks can be considered reliable in preliminary design.

  3. ASSESSMENT OF EFFICIENCY OF APPLICATION OF TOOLS OF CARRYING OUT THE ALL-RUSSIAN POPULATION CENSUS OF 2020

    Directory of Open Access Journals (Sweden)

    Oleg V. Manzhula

    2014-01-01

    Full Text Available At a stage of preparation for the All-Russian population census of 2020 it is necessary to develop methodical and technological support of processes of carrying out census for increase of reliability of data collection and quality of information processing of population census of the Russian Federation with use of modern information and communication technologies, and also a technique of an assessment of efficiency of application of tools of carrying out census

  4. [The impact of technological change on census taking: some thoughts on implications for the 1990 round of censuses and on the statistical use of administrative records].

    Science.gov (United States)

    Brackstone, G J

    1984-01-01

    The author presents some general thoughts on the implications of technological change for the 1990 round of censuses and for the statistical use of administrative records. Consideration is also given to alternative methods of obtaining the type of data traditionally collected in a population census, by using these new technologies in association with administrative record systems.

  5. Method Development in the Area of Multi-Block Analysis Focused on Food Analysis

    DEFF Research Database (Denmark)

    Biancolillo, Alessandra

    data and consumer acceptance data. A further example could be in process monitoring, where one of the main tasks is to figure out relations among spectroscopic measurements on raw materials and/or during the production, process settings, and the quality of end-product(s). Additionally, data blocks...... could have not only different origin, but measurements could be taken at different time points or by multi-channel instruments. It has been demonstrated, that it is more convenient to extract information from multi-block data sets handling all the blocks at the same time. Namely, performing data fusion...

  6. Using high-order methods on adaptively refined block-structured meshes - discretizations, interpolations, and filters.

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Jaideep; Lefantzi, Sophia; Najm, Habib N.; Kennedy, Christopher A.

    2006-01-01

    Block-structured adaptively refined meshes (SAMR) strive for efficient resolution of partial differential equations (PDEs) solved on large computational domains by clustering mesh points only where required by large gradients. Previous work has indicated that fourth-order convergence can be achieved on such meshes by using a suitable combination of high-order discretizations, interpolations, and filters and can deliver significant computational savings over conventional second-order methods at engineering error tolerances. In this paper, we explore the interactions between the errors introduced by discretizations, interpolations and filters. We develop general expressions for high-order discretizations, interpolations, and filters, in multiple dimensions, using a Fourier approach, facilitating the high-order SAMR implementation. We derive a formulation for the necessary interpolation order for given discretization and derivative orders. We also illustrate this order relationship empirically using one and two-dimensional model problems on refined meshes. We study the observed increase in accuracy with increasing interpolation order. We also examine the empirically observed order of convergence, as the effective resolution of the mesh is increased by successively adding levels of refinement, with different orders of discretization, interpolation, or filtering.

  7. [Automated processing of data from the 1985 population and housing census].

    Science.gov (United States)

    Cholakov, S

    1987-01-01

    The author describes the method of automated data processing used in the 1985 census of Bulgaria. He notes that the computerization of the census involves decentralization and the use of regional computing centers as well as data processing at the Central Statistical Office's National Information Computer Center. Special attention is given to problems concerning the projection and programming of census data. (SUMMARY IN ENG AND RUS)

  8. Use of aerial photograph to enhance dog population census in Ilorin ...

    African Journals Online (AJOL)

    The ground survey method for dog population census is considered to be prone to error in enumeration. As a result, use of aerial photography has been suggested as capable of enhancing ground survey methods for more accurate results. Dog population census was carried out within llorin city in October 2010 using direct ...

  9. [The measurement of data quality in censuses of population and housing].

    Science.gov (United States)

    1980-01-01

    The determination of data quality in population and housing censuses is discussed. Principal types of errors commonly found in census data are reviewed, and the parameters used to evaluate data quality are described. Various methods for measuring data quality are outlined and possible applications of the methods are illustrated using Canadian examples

  10. Nerve Blocks

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z Nerve Blocks A nerve block is an injection to ... the limitations of Nerve Block? What is a Nerve Block? A nerve block is an anesthetic and/ ...

  11. Study on disposal method of graphite blocks and storage of spent fuel for modular gas-cooled reactor. Joint research

    Energy Technology Data Exchange (ETDEWEB)

    Sumita, Junya; Sawa, Kazuhiro; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Tsuchie, Yasuo; Urakami, Masao [Japan Atomic Power Co., Tokyo (Japan)

    2003-02-01

    This report describes the result of study on disposal method of graphite blocks in future block-type reactor. Present study was carried out within a framework of joint research, ''Research of Modular High Temperature Gas-cooled Reactors (No. 3)'', between Japan Atomic Energy Research Institute (JAERI) and the Japan Atomic Power Company (JAPCO), in 2000. In this study, activities in fuel and reflector graphite blocks were evaluated and were compared with the disposal limits defined as low-level of radioactive waste. As a result, it was found that the activity for only C-14 was higher than disposal limits for the low-level of radioactive waste and that the amount of air in the graphite is important to evaluate precisely of C-14 activity. In addition, spent fuels can be stored in air-cooled condition at least after two years cooling in the storage pool. (author)

  12. Nonaqueous Dispersion Formed by an Emulsion Solvent Evaporation Method Using Block-Random Copolymer Surfactant Synthesized by RAFT Polymerization.

    Science.gov (United States)

    Ezaki, Naofumi; Watanabe, Yoshifumi; Mori, Hideharu

    2015-10-27

    As surfactants for preparation of nonaqueous microcapsule dispersions by the emulsion solvent evaporation method, three copolymers composed of stearyl methacrylate (SMA) and glycidyl methacrylate (GMA) with different monomer sequences (i.e., random, block, and block-random) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Despite having the same comonomer composition, the copolymers exhibited different functionality as surfactants for creating emulsions with respective dispersed and continuous phases consisting of methanol and isoparaffin solvent. The optimal monomer sequence for the surfactant was determined based on the droplet sizes and the stabilities of the emulsions created using these copolymers. The block-random copolymer led to an emulsion with better stability than obtained using the random copolymer and a smaller droplet size than achieved with the block copolymer. Modification of the epoxy group of the GMA unit by diethanolamine (DEA) further decreased the droplet size, leading to higher stability of the emulsion. The DEA-modified block-random copolymer gave rise to nonaqueous microcapsule dispersions after evaporation of methanol from the emulsions containing colored dyes in their dispersed phases. These dispersions exhibited high stability, and the particle sizes were small enough for application to the inkjet printing process.

  13. Research of Block-Based Motion Estimation Methods for Video Compression

    Directory of Open Access Journals (Sweden)

    Tropchenko Andrey

    2016-08-01

    Full Text Available This work is a review of the block-based algorithms used for motion estimation in video compression. It researches different types of block-based algorithms that range from the simplest named Full Search to the fast adaptive algorithms like Hierarchical Search. The algorithms evaluated in this paper are widely accepted by the video compressing community and have been used in implementing various standards, such as MPEG-4 Visual and H.264. The work also presents a very brief introduction to the entire flow of video compression.

  14. A method to compute the inverse of a complex n-block tridiagonal quasi-hermitian matrix

    International Nuclear Information System (INIS)

    Godfrin, Elena

    1990-01-01

    This paper presents a method to compute the inverse of a complex n-block tridiagonal quasi-hermitian matrix using adequate partitions of the complete matrix. This type of matrix is very usual in quantum mechanics and, more specifically, in solid state physics (e.g., interfaces and superlattices), when the tight-binding approximation is used. The efficiency of the method is analyzed comparing the required CPU time and work-area for different usual techniques. (Author)

  15. An approximate block Newton method for coupled iterations of nonlinear solvers: Theory and conjugate heat transfer applications

    Science.gov (United States)

    Yeckel, Andrew; Lun, Lisa; Derby, Jeffrey J.

    2009-12-01

    A new, approximate block Newton (ABN) method is derived and tested for the coupled solution of nonlinear models, each of which is treated as a modular, black box. Such an approach is motivated by a desire to maintain software flexibility without sacrificing solution efficiency or robustness. Though block Newton methods of similar type have been proposed and studied, we present a unique derivation and use it to sort out some of the more confusing points in the literature. In particular, we show that our ABN method behaves like a Newton iteration preconditioned by an inexact Newton solver derived from subproblem Jacobians. The method is demonstrated on several conjugate heat transfer problems modeled after melt crystal growth processes. These problems are represented by partitioned spatial regions, each modeled by independent heat transfer codes and linked by temperature and flux matching conditions at the boundaries common to the partitions. Whereas a typical block Gauss-Seidel iteration fails about half the time for the model problem, quadratic convergence is achieved by the ABN method under all conditions studied here. Additional performance advantages over existing methods are demonstrated and discussed.

  16. Census County Subdivisions for the United States Virgin Islands (CENSUS.COUNTY_SUBDIV_USVI)

    Data.gov (United States)

    U.S. Environmental Protection Agency — County subdivisions are the primary divisions of counties and statistically equivalent entities for the reporting of decennial census data. They include census...

  17. Suitability of the Cellient (TM) cell block method for diagnosing soft tissue and bone tumors

    NARCIS (Netherlands)

    Song, W.; van Hemel, B. M.; Suurmeijer, A. J. H.

    BACKGROUNDThe diagnosis of tumors of soft tissue and bone (STB) heavily relies on histological biopsies, whereas cytology is not widely used. Cellient(TM) cell blocks often contain small tissue fragments. In addition to Hematoxylin and Eosin (H&E) interpretation of histological features,

  18. Ultrasound-guided block of the axillary nerve: a volunteer study of a new method

    DEFF Research Database (Denmark)

    Rothe, C; Asghar, S; Andersen, H L

    2011-01-01

    Interscalene brachial plexus block (IBPB) is the gold standard for perioperative pain management in shoulder surgery. However, a more distal technique would be desirable to avoid the side effects and potential serious complications of IBPB. Therefore, the aim of the present study was to develop...

  19. Vesicle formation in the block copolymer/ homopolymer mixture studied by scattering methods

    International Nuclear Information System (INIS)

    Koizumi, Satoshi; Hasegawa, Hirokazu; Hashimoto, Takeji; Suzuki, Junnich.

    1993-01-01

    We studied morphology and spatial segmental distribution of particular binary mixtures of poly(styrene-block-isoprene)(SI) and homopolystyren, either protonated (HS) or deuterated (DS), with small angle-X-ray scattering (SAXS) and neutron scattering (SANS). The block copolymer SI used itself had a lamellar microdomain. Molecular weights of HS and DS were identical to each other and equal also to that of polystyrene block (PS) in SI. SAXS results obtained for SI and HS mixtures show that: (1) HS is solubilized in the PS microdomains; (2) the polyisoprene lamella has the thickness independent of w HS , weight fraction of HS, but its undulation depends on w HS . These two findings, in turn, imply that the HS added is localized in the middle of the PS microdomains, i.e., in between the PS brushes emanating from the interface of SI. We further confirmed this implication by SANS with a deuterium labeling technique; the DS segments studied for the SI/DS mixture is localized in the middle of PS microdomain with the penetration depth of 10 nm between DS and PS block chains. (author)

  20. Dose response curve for micronucleus of cytokinesis-block method in human lymphocytes after 60Co-gamma ray exposure

    International Nuclear Information System (INIS)

    Gao Jinsheng; Zheng Siying; Cai Feng

    1993-08-01

    The micronucleus technique of cytokines block has been proposed as a new method to measure chromosome damage in cytogenetic. The cytokines is blocked by using cytochalasin B (Cyt-B), and micronuclei are scored in cytokines-blocked (CB) cells. This can easily be done owing to the appearance of binucleate cells and large numbers accumulated by adding 3.0 μg/ml cytochalasin B at 44 hours and scoring at 72 hours. The results show that the optimum concentration of Cyt-B is 3.0 μg/ml. the Cyt-B itself can not induce the increase of micronuclei. The micronucleus frequency of normal individuals in vivo, there is an approximately linear relationship between the frequency of induced micronuclei and irradiation dose. The formula is Y 0.36 D + 2.74 (γ 2 = 0.995 P<0.01). Because the cytokines block method is simple and reliable, it is effective for assaying chromosome damage caused by genetic toxic materials

  1. Census 2001: issues and perspectives.

    Science.gov (United States)

    1998-01-01

    This article discusses the Census of India for 2001 and gender issues such as the sex ratio, undercounts of girls, tribe and scheduled caste data, and the data users' conference. The April 1998 conference was attended by representatives of government planning and development departments, research institutions, and statisticians and researchers. Under consideration was a government Ministry of Welfare proposal to reintroduce, after a 60-year hiatus, data by scheduled caste and tribe. This issue is complicated by criteria that vary by state and includability. Quotas for backward classes in educational institutions, government jobs, and in decision-making bodies are the reason for designations by caste. Some groups are distressed because of lack of inclusion as backward classes. M.N. Srinivas strongly advises that counting by caste will create problems for enumerators and will result in lawsuits and violent disturbances. G. Shah argues that caste counts will not weaken the caste system nor expand their political power, but will intensify internal conflicts between the Dalit and Bahujan movements. One other issue is the reintroduction of the 1961 Household schedule which provides family composition by landholding size and household enterprise. Krishnaji advises that this data would help analyze sex ratio imbalances. In 1997, the Core Group examined gender equity issues and operational issues about increasing the scope without increasing costs. The Core Group recommended caste data at the district and sub-district level. Undercounting of the female work force is a continuing issue from the 1991 Census. Suggestions by the Core Group are indicated in brief.

  2. Diaphragmatic thickness ratio (inspiratory/expiratory) as a diagnostic method of diaphragmatic palsy associated with interescalene block.

    Science.gov (United States)

    López Escárraga, V M; Dubos España, K; Castillo Bustos, R H; Peidró, L; Sastre, S; Sala-Blanch, X

    2018-02-01

    Diaphragmatic paralysis is a side-effect associated with interscalene block. Thickness index of the diaphragm muscle (inspiratory thickness/expiratory thickness) obtained by ultrasound has recently been introduced in clinical practice for diagnosis of diaphragm muscle atrophy. Our objective was to evaluate this index for the diagnosis of acute phrenic paresis associated with interscalene block. We designed an observational study in 22 patients scheduled for shoulder arthroscopy. Spirometry was performed (criteria of phrenic paresis was a decrease in FVC and FEV1 ≥20%). Ultrasound apposition zone was assessed in anterior axillary line and diaphragmatic displacement was evaluated on inspiration and expiration (number of intercostal spaces; phrenic paresis considered a reduction ≥25%) and thickness of the diaphragm muscle (a phrenic paresis was considered an index block at C5-C6 with 20ml of 0.5% ropivacaine. Twenty-one patients (95%) presented phrenic nerve block according to one or more of the methods used. One patient did not show any symptoms or signs suggestive of phrenic paralysis and was excluded. All the patients presented phrenic paresis based on the diaphragmatic thickness index, with the pre-block index being 1.8±0.5 and post-block of 1.05±0.06 (Pblock (from 1.9±0.5 intercostal spaces to 0.5±0.3; Pblock. This index does not require a baseline pre-assessment. Copyright © 2017 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  3. Analysis of the Block-Grid Method for the Solution of Laplace's Equation on Polygons with a Slit

    Directory of Open Access Journals (Sweden)

    S. Cival Buranay

    2013-01-01

    Full Text Available The error estimates obtained for solving Laplace's boundary value problem on polygons by the block-grid method contain constants that are difficult to calculate accurately. Therefore, the experimental analysis of the method could be essential. The real characteristics of the block-grid method for solving Laplace's equation on polygons with a slit are analysed by experimental investigations. The numerical results obtained show that the order of convergence of the approximate solution is the same as in the case of a smooth solution. To illustrate the singular behaviour around the singular point, the shape of the highly accurate approximate solution and the figures of its partial derivatives up to second order are given in the “singular” part of the domain. Finally a highly accurate formula is given to calculate the stress intensity factor, which is an important quantity in fracture mechanics.

  4. Full-scale demonstration of EBS construction technology I. Block, pellet and in-situ compaction method

    International Nuclear Information System (INIS)

    Toguri, Satohito; Asano, Hidekazu; Takao, Hajime; Matsuda, Takeshi; Amemiya, Kiyoshi

    2008-01-01

    (i) Bentonite Block: Applicability of manufacturing technology of buffer material was verified by manufacturing of full scale bentonite ring which consists of one-eight (1/8) dividing block (Outside Diameter (OD): 2.220 mm H: 300 mm). Density characteristic, dimension and scale effect, which were considered the tunnel environment under transportation, were evaluated. Vacuum suction technology was selected as handling technology for the ring. Hoisting characteristic of vacuum suction technology was presented through evaluation of the mechanical property of buffer material, the friction between blocks, etc. by using a full-scale bentonite ring (OD 2.200 mm, H 300 mm). And design of bentonite block and emplacement equipment were presented in consideration of manufacturability of the block, stability of handling and improvement of emplacement efficiency. (ii) Bentonite Pellet Filling: Basic characteristics such as water penetration, swelling and thermal conductivity of various kinds of bentonite pellet were collected by laboratory scale tests. Applicability of pellet filling technology was evaluated by horizontal filling test using a simulated full-scale drift tunnel (OD 2.200 mm, L 6 m) . Filling density, grain size distribution, etc. were also measured. (iii) In-Situ Compaction of Bentonite: Dynamic compaction method (heavy weight fall method) was selected as in-situ compaction technology. Compacting examination which used a full scale disposal pit (OD 2.360 mm) was carried out. Basic specification of compacting equipment and applicability of in-situ compaction technology were presented. Density, density distribution of buffer material and energy acted on the wall of the pit, were also measured. (author)

  5. Use of the cumulative sum method (CUSUM) to assess the learning curves of ultrasound-guided continuous femoral nerve block.

    Science.gov (United States)

    Kollmann-Camaiora, A; Brogly, N; Alsina, E; Gilsanz, F

    2017-10-01

    Although ultrasound is a basic competence for anaesthesia residents (AR) there is few data available on the learning process. This prospective observational study aims to assess the learning process of ultrasound-guided continuous femoral nerve block and to determine the number of procedures that a resident would need to perform in order to reach proficiency using the cumulative sum (CUSUM) method. We recruited 19 AR without previous experience. Learning curves were constructed using the CUSUM method for ultrasound-guided continuous femoral nerve block considering 2 success criteria: a decrease of pain score>2 in a [0-10] scale after 15minutes, and time required to perform it. We analyse data from 17 AR for a total of 237 ultrasound-guided continuous femoral nerve blocks. 8/17 AR became proficient for pain relief, however all the AR who did more than 12 blocks (8/8) became proficient. As for time of performance 5/17 of AR achieved the objective of 12minutes, however all the AR who did more than 20 blocks (4/4) achieved it. The number of procedures needed to achieve proficiency seems to be 12, however it takes more procedures to reduce performance time. The CUSUM methodology could be useful in training programs to allow early interventions in case of repeated failures, and develop competence-based curriculum. Copyright © 2017 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  6. New Mexico Census Tracts, Total Population (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  7. 75 FR 17835 - Census Day, 2010

    Science.gov (United States)

    2010-04-07

    ... Since our Nation's earliest days, the census has played an important role in identifying where resources... receive adequate funding for schools, hospitals, senior centers, and other public works projects. The 2010 Census will also aid employers in selecting locations for new factories and businesses as our economy...

  8. Eigenvalue routines in NASTRAN: A comparison with the Block Lanczos method

    Science.gov (United States)

    Tischler, V. A.; Venkayya, Vipperla B.

    1993-01-01

    The NASA STRuctural ANalysis (NASTRAN) program is one of the most extensively used engineering applications software in the world. It contains a wealth of matrix operations and numerical solution techniques, and they were used to construct efficient eigenvalue routines. The purpose of this paper is to examine the current eigenvalue routines in NASTRAN and to make efficiency comparisons with a more recent implementation of the Block Lanczos algorithm by Boeing Computer Services (BCS). This eigenvalue routine is now available in the BCS mathematics library as well as in several commercial versions of NASTRAN. In addition, CRAY maintains a modified version of this routine on their network. Several example problems, with a varying number of degrees of freedom, were selected primarily for efficiency bench-marking. Accuracy is not an issue, because they all gave comparable results. The Block Lanczos algorithm was found to be extremely efficient, in particular, for very large size problems.

  9. Building block method: a bottom-up modular synthesis methodology for distributed compliant mechanisms

    Directory of Open Access Journals (Sweden)

    G. Krishnan

    2012-03-01

    Full Text Available Synthesizing topologies of compliant mechanisms are based on rigid-link kinematic designs or completely automated optimization techniques. These designs yield mechanisms that match the kinematic specifications as a whole, but seldom yield user insight on how each constituent member contributes towards the overall mechanism performance. This paper reviews recent developments in building block based design of compliant mechanisms. A key aspect of such a methodology is formulating a representation of compliance at a (i single unique point of interest in terms of geometric quantities such as ellipses and vectors, and (ii relative compliance between distinct input(s and output(s in terms of load flow. This geometric representation provides a direct mapping between the mechanism geometry and their behavior, and is used to characterize simple deformable members that form a library of building blocks. The design space spanned by the building block library guides the decomposition of a given problem specification into tractable sub-problems that can be each solved from an entry in the library. The effectiveness of this geometric representation aids user insight in design, and enables discovery of trends and guidelines to obtain practical conceptual designs.

  10. Effects of different building blocks designs on the statistical ...

    African Journals Online (AJOL)

    Tholang T. Mokhele

    Enumeration Areas (EAs), Small Area Layers (SALs) and SubPlaces) from the 2001 census data were used as building blocks for the generation of census output areas with AZTool program in both rural and urban areas of South Africa. One way-Analysis of Variance (ANOVA) was also performed to determine statistical ...

  11. Uranium City radiation reduction program: further efforts at remedial measures for houses with block walls, concrete porosity test results, and intercomparison of Kuznetz method and Tsivoglau method

    International Nuclear Information System (INIS)

    Haubrich, E.; Leung, M.K.; Mackie, R.

    1980-01-01

    An attempt was made to reduce the levels of radon in a house in Uranium City by mechanically venting the plenums in the concrete block basement walls, with little success. A table compares the results obtained by measuring the radon WL using the Tsivoglau and the Kuznetz methods

  12. A Trigonometrically Fitted Block Method for Solving Oscillatory Second-Order Initial Value Problems and Hamiltonian Systems

    OpenAIRE

    Ngwane, F. F.; Jator, S. N.

    2017-01-01

    In this paper, we present a block hybrid trigonometrically fitted Runge-Kutta-Nyström method (BHTRKNM), whose coefficients are functions of the frequency and the step-size for directly solving general second-order initial value problems (IVPs), including Hamiltonian systems such as the energy conserving equations and systems arising from the semidiscretization of partial differential equations (PDEs). Four discrete hybrid formulas used to formulate the BHTRKNM are provided by a continuous one...

  13. Analysis of a block Gauss-Seidel iterative method for a finite element discretization of the neutron transport equation

    International Nuclear Information System (INIS)

    Lorence, L.J. Jr.; Martin, W.R.; Luskin, M.

    1985-01-01

    We prove the convergence of a finite element discretization of the neutron transport equation. The iterative solution of the resulting linear system by a block Gauss-Seidel method is also analyzed. This procedure is shown to require less storage than the direct solution by Gaussian elimination, and an estimate for the rate of convergence is used to show that fewer arithmetic operations are required

  14. Block cipher based on modular arithmetic and methods of information compression

    Science.gov (United States)

    Krendelev, S.; Zbitnev, N.; Shishlyannikov, D.; Gridin, D.

    2017-10-01

    The article focuses on the description of a new block cipher. Due to the heightened interest in BigData the described cipher is used to encrypt big volumes of data in cloud storage services. The main advantages of the given cipher are the ease of implementation and the possibility of probabilistic encryption. This means that the text encryption will be different when the key is the same and the data is the same. So, the strength of the encryption is improved. Additionally, the ciphered message size can be hardly predicted.

  15. EnviroAtlas - New York, NY - Block Groups

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset is the base layer for the New York, NY EnviroAtlas community. The block groups are from the US Census Bureau and are included/excluded based...

  16. Ethnicity in censuses: Changeable and inconstant category

    Directory of Open Access Journals (Sweden)

    Mrđen Snježana

    2002-01-01

    Full Text Available The issue of ethnicity was set in all censuses of SFRY, as well as in the first censuses in countries that were created after its disintegration. When analyzing the censuses it can be concluded that it is a changeable category. Not only was the manner of forming the question in censuses changing, but also the number of categories of nationality and their order in published census' results. It depended on state policy and the political situation preceding the censuses. Since the answer on the issues of ethnicity is a subjective criterion, and it was written down according to the freely declared statement of the residents, guaranteed by the Constitution. It has often happened that same individuals have declared themselves differently from one census to another, and also some categories of ethnicity have vanished and some others were created. Although in SFRY nations and ethnicities were equal, still indirectly in published results, existence of these two categories was indicated. But, in newly created countries, the manner of forming the question of ethnicity was changed, their number and order were also changed and the notion of 'minority' was again introduced, indicating, beyond doubt, a different status of nationality (except the majority from the one in the former Yugoslavia.

  17. Development of flow network analysis code for block type VHTR core by linear theory method

    International Nuclear Information System (INIS)

    Lee, J. H.; Yoon, S. J.; Park, J. W.; Park, G. C.

    2012-01-01

    VHTR (Very High Temperature Reactor) is high-efficiency nuclear reactor which is capable of generating hydrogen with high temperature of coolant. PMR (Prismatic Modular Reactor) type reactor consists of hexagonal prismatic fuel blocks and reflector blocks. The flow paths in the prismatic VHTR core consist of coolant holes, bypass gaps and cross gaps. Complicated flow paths are formed in the core since the coolant holes and bypass gap are connected by the cross gap. Distributed coolant was mixed in the core through the cross gap so that the flow characteristics could not be modeled as a simple parallel pipe system. It requires lot of effort and takes very long time to analyze the core flow with CFD analysis. Hence, it is important to develop the code for VHTR core flow which can predict the core flow distribution fast and accurate. In this study, steady state flow network analysis code is developed using flow network algorithm. Developed flow network analysis code was named as FLASH code and it was validated with the experimental data and CFD simulation results. (authors)

  18. Fluctuations, Finite-Size Effects and the Thermodynamic Limit in Computer Simulations: Revisiting the Spatial Block Analysis Method

    Directory of Open Access Journals (Sweden)

    Maziar Heidari

    2018-03-01

    Full Text Available The spatial block analysis (SBA method has been introduced to efficiently extrapolate thermodynamic quantities from finite-size computer simulations of a large variety of physical systems. In the particular case of simple liquids and liquid mixtures, by subdividing the simulation box into blocks of increasing size and calculating volume-dependent fluctuations of the number of particles, it is possible to extrapolate the bulk isothermal compressibility and Kirkwood–Buff integrals in the thermodynamic limit. Only by explicitly including finite-size effects, ubiquitous in computer simulations, into the SBA method, the extrapolation to the thermodynamic limit can be achieved. In this review, we discuss two of these finite-size effects in the context of the SBA method due to (i the statistical ensemble and (ii the finite integration domains used in computer simulations. To illustrate the method, we consider prototypical liquids and liquid mixtures described by truncated and shifted Lennard–Jones (TSLJ potentials. Furthermore, we show some of the most recent developments of the SBA method, in particular its use to calculate chemical potentials of liquids in a wide range of density/concentration conditions.

  19. Standard test method for ranking resistance of materials to sliding wear using block-on-ring wear test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers laboratory procedures for determining the resistance of materials to sliding wear. The test utilizes a block-on-ring friction and wear testing machine to rank pairs of materials according to their sliding wear characteristics under various conditions. 1.2 An important attribute of this test is that it is very flexible. Any material that can be fabricated into, or applied to, blocks and rings can be tested. Thus, the potential materials combinations are endless. However, the interlaboratory testing has been limited to metals. In addition, the test can be run with various lubricants, liquids, or gaseous atmospheres, as desired, to simulate service conditions. Rotational speed and load can also be varied to better correspond to service requirements. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Wear test results are reported as the volume loss in cubic millimetres for both the block and ring. Materials...

  20. Rio Arriba County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. Dona Ana County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Los Alamos County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. McKinley County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. San Juan County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. Dona Ana County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. A global census of marine microbes

    Digital Repository Service at National Institute of Oceanography (India)

    Amaral-Zettler, L.; Artigas, L.F.; Baross, J.; LokaBharathi, P.A; Boetius, A; Chandramohan, D.; Herndl, G.; Kogure, K.; Neal, P.; Pedros-Alio, C.; Ramette, A; Schouten, S.; Stal, L.; Thessen, A; De Leeuw, J.; Sogin, M.

    In this chapter we provide a brief history of what is known about marine microbial diversity, summarize our achievements in performing a global census of marine microbes, and reflect on the questions and priorities for the future of the marine...

  7. Rio Arriba County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  8. Los Alamos County 1990 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This data set is a vector polygon digital data structure taken from the Census Bureau's TIGER/Line Files, 1994, for New Mexico. The source software used was ARC/INFO...

  9. Dona Ana County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Santa Fe County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  11. New Mexico County Boundaries (2010 Census)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. San Juan County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Los Alamos County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. San Miguel County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  15. San Juan County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  16. Santa Fe County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. San Miguel County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. De Baca County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  19. Rio Arriba County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  20. McKinley County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  1. McKinley County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  2. Los Alamos County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  3. San Miguel County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  4. De Baca County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  5. New Mexico, 2010 Census American Indian

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  6. Counting nurses: the power of historical census data.

    Science.gov (United States)

    D'Antonio, Patricia; Whelan, Jean C

    2009-10-01

    This study used census data to construct a demographic profile of early 20th century nurses in the United States. Census data are recognised as a rich source of quantitative information on long-term changes. However, difficulties in retrieving census data dissuade researchers from exploiting this source. Integrated Public Use Microdata Series, a standardised and digitialised version of census data, enables greater ease in retrieving and analysing data. A sample of respondents identifying as 'professional nurses' for the years 1900-1950 was extracted from Integrated Public Use Microdata Series categorised by the variables of race, sex and marital status. The resulting data were analysed for simple frequency statistics using SPSS software. Results revealed a tremendous increase in the number of nurses over the five decades under study. Nurses were increasingly young, female, single and white until 1930. After 1930, white and African-American women nurses began to reflect trends towards more diversity. This study is the first systematic attempt to trace the demographic trajectory of professional nurses in the United States in the early 20th century. It also demonstrates the possibilities of using digital technologies to restructure the asking and answering of historical questions. The use of quantitative methods of social history has trans-national applications which can facilitate global investigations into the demographic composition of the nursing occupation. RELEVANCE TO POLICY: This way of using digitalisation of census data provides a way to examine historical trans-national workforce trends. Such trends provide a firmer base upon which to construct workforce and practice strategies for a future global workforce.

  7. Subcutaneous dissociative conscious sedation (sDCS an alternative method for airway regional blocks: a new approach

    Directory of Open Access Journals (Sweden)

    Javid Mihan J

    2011-10-01

    Full Text Available Abstract Background Predicted difficult airway is a definite indication for awake intubation and spontaneous ventilation. Airway regional blocks which are commonly used to facilitate awake intubation are sometimes impossible or forbidden. On the other hand deep sedation could be life threatening in the case of compromised airway. The aim of this study is evaluating "Subcutaneous Dissociative Conscious Sedation" (sDCS as an alternative method to airway regional blocks for awake intubation. Methods In this prospective, non-randomized study, 30 patients with predicted difficult airway (laryngeal tumors, who were scheduled for direct laryngoscopic biopsy (DLB, underwent "Subcutaneous Dissociative Conscious Sedation" (sDCS exerted by intravenous fentanyl 3-4ug/kg and subcutaneous ketamine 0.6-0.7 mg/kg. The tongue and pharynx were anesthetized with lidocaine spray (4%. 10 minutes after a subcutaneous injection of ketamine direct laryngoscopy was performed. Extra doses of fentanyl 50-100 ug were administered if the patient wasn't cooperative enough for laryngoscopy. Patients were evaluated for hemodynamic stability (heart rate and blood pressure, oxygen saturation (Spo2, patient cooperation (obedient to open the mouth for laryngoscopy and the number of tries for laryngoscopy, patient comfort (remaining moveless, hallucination, nystagmus and salivation (need for aspiration before laryngoscopy. Results Direct laryngoscopy was performed successfully in all patients. One patient needed extra fentanyl and then laryngoscopy was performed successfully on the second try. All patients were cooperative enough during laryngoscopy. Hemodynamic changes more than 20% occurred in just one patient. Oxygen desaturation (spo2 Conclusions Subcutaneous Dissociative Conscious Sedation (sDCS as a new approach to airway is an acceptable and safe method for awake intubation and it can be suggested as a noninvasive substitute of low complication rate for regional airway

  8. Cutting method for structural component into block like shape, and device used for cutting

    International Nuclear Information System (INIS)

    Nakazawa, Koichi; Ito, Akira; Tateiwa, Masaaki.

    1995-01-01

    Two grooves each of a predetermined depth are formed along a surface of a structural component, and a portion between the two grooves is cut in the direction of the depth from the surface of the structural component by using a cutting wire of a wire saw device. Then, the cutting wire is moved in the extending direction of the grooves while optionally changing the position in the direction of the depth to conduct cutting for the back face. Further, the cutting wire is moved in the direction of the depth of the groove toward the surface, to cut a portion between the two grooves. The wire saw device comprises a wire saw main body movable along the surface of the structural component, a pair of wire guide portions extending in the direction of the depth, guide pooleys capable of guiding the cutting wire guides revolvably and rotatably disposed at the top end, and an endless annular cutting wire extending between the wire guide portions. Thus, it is possible to continuously cut out blocks set to optional size and thickness. In addition, remote cutting is possible with no requirement for an operator to access to the vicinity of radioactivated portions. (N.H.)

  9. Smart density: a more accurate method of measuring rural residential density for health-related research

    Directory of Open Access Journals (Sweden)

    Gibson Lucinda

    2010-02-01

    Full Text Available Abstract Background Studies involving the built environment have typically relied on US Census data to measure residential density. However, census geographic units are often unsuited to health-related research, especially in rural areas where development is clustered and discontinuous. Objective We evaluated the accuracy of both standard census methods and alternative GIS-based methods to measure rural density. Methods We compared residential density (units/acre in 335 Vermont school neighborhoods using conventional census geographic units (tract, block group and block with two GIS buffer measures: a 1-kilometer (km circle around the school and a 1-km circle intersected with a 100-meter (m road-network buffer. The accuracy of each method was validated against the actual residential density for each neighborhood based on the Vermont e911 database, which provides an exact geo-location for all residential structures in the state. Results Standard census measures underestimate residential density in rural areas. In addition, the degree of error is inconsistent so even the relative rank of neighborhood densities varies across census measures. Census measures explain only 61% to 66% of the variation in actual residential density. In contrast, GIS buffer measures explain approximately 90% of the variation. Combining a 1-km circle with a road-network buffer provides the closest approximation of actual residential density. Conclusion Residential density based on census units can mask clusters of development in rural areas and distort associations between residential density and health-related behaviors and outcomes. GIS-defined buffers, including a 1-km circle and a road-network buffer, can be used in conjunction with census data to obtain a more accurate measure of residential density.

  10. A block Krylov subspace time-exact solution method for linear ordinary differential equation systems

    NARCIS (Netherlands)

    Bochev, Mikhail A.

    2013-01-01

    We propose a time-exact Krylov-subspace-based method for solving linear ordinary differential equation systems of the form $y'=-Ay+g(t)$ and $y"=-Ay+g(t)$, where $y(t)$ is the unknown function. The method consists of two stages. The first stage is an accurate piecewise polynomial approximation of

  11. Multigrid technique and Optimized Schwarz method on block-structured grids with discontinuous interfaces

    DEFF Research Database (Denmark)

    Kolmogorov, Dmitry; Sørensen, Niels N.; Shen, Wen Zhong

    2013-01-01

    An Optimized Schwarz method using Robin boundary conditions for relaxation scheme is presented in the frame of Multigrid method on discontinuous grids. At each iteration the relaxation scheme is performed in two steps: one step with Dirichlet and another step with Robin boundary conditions at inn...

  12. Smart density: A more accurate method of measuring rural residential density for health-related research.

    Science.gov (United States)

    Owens, Peter M; Titus-Ernstoff, Linda; Gibson, Lucinda; Beach, Michael L; Beauregard, Sandy; Dalton, Madeline A

    2010-02-12

    Studies involving the built environment have typically relied on US Census data to measure residential density. However, census geographic units are often unsuited to health-related research, especially in rural areas where development is clustered and discontinuous. We evaluated the accuracy of both standard census methods and alternative GIS-based methods to measure rural density. We compared residential density (units/acre) in 335 Vermont school neighborhoods using conventional census geographic units (tract, block group and block) with two GIS buffer measures: a 1-kilometer (km) circle around the school and a 1-km circle intersected with a 100-meter (m) road-network buffer. The accuracy of each method was validated against the actual residential density for each neighborhood based on the Vermont e911 database, which provides an exact geo-location for all residential structures in the state. Standard census measures underestimate residential density in rural areas. In addition, the degree of error is inconsistent so even the relative rank of neighborhood densities varies across census measures. Census measures explain only 61% to 66% of the variation in actual residential density. In contrast, GIS buffer measures explain approximately 90% of the variation. Combining a 1-km circle with a road-network buffer provides the closest approximation of actual residential density. Residential density based on census units can mask clusters of development in rural areas and distort associations between residential density and health-related behaviors and outcomes. GIS-defined buffers, including a 1-km circle and a road-network buffer, can be used in conjunction with census data to obtain a more accurate measure of residential density.

  13. Visual-Simulation-Based Personalized Garment Block Design Method for Physically Disabled People with Scoliosis (PDPS

    Directory of Open Access Journals (Sweden)

    Hong Yan

    2018-03-01

    Full Text Available This research presented a novel method using 3D simulation methods to design customized garments for physically disabled people with scoliosis (PDPS. The proposed method is based on the virtual human model created from 3D scanning, permitting to simulate the consumer’s morphological shape with atypical physical deformations. Next, customized 2D and 3D virtual garment prototyping tools will be used to create products through interactions. The proposed 3D garment design method is based on the concept of knowledge-based design, using the design knowledge and process already applied to normal body shapes successfully. The characters of the PDPS and the relationship between human body and garment are considered in the prototyping process. As a visualized collaborative design process, the communication between designer and consumer is ensured, permitting to adapt the finished product to disabled people afflicted with severe scoliosis.

  14. Standard test method for ranking resistance of plastics to sliding wear using block-on-ring wear test—cumulative wear method

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method covers laboratory procedures for determining the resistance of plastics to sliding wear. The test utilizes a block-on-ring friction and wear testing machine to rank plastics according to their sliding wear characteristics against metals or other solids. 1.2 An important attribute of this test is that it is very flexible. Any material that can be fabricated into, or applied to, blocks and rings can be tested. Thus, the potential materials combinations are endless. In addition, the test can be run with different gaseous atmospheres and elevated temperatures, as desired, to simulate service conditions. 1.3 Wear test results are reported as the volume loss in cubic millimetres for the block and ring. Materials of higher wear resistance will have lower volume loss. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with it...

  15. Agarose cell block technique as a complementary method in the diagnosis of fungal osteomyelitis in a dog

    Directory of Open Access Journals (Sweden)

    N.S. Rocha

    2012-04-01

    Full Text Available A 7-year-old Labrador Retriever female dog presenting left forelimb lameness for one day was admitted to the Veterinary Hospital (UNESP-Botucatu for clinical evaluation. Several tests, including blood and image analysis, microbiological culture and cytology of lytic areas of affected bone were made in order to establish a diagnosis. Serum biochemical profile revealed increased levels of liver enzymes, plasma globulin, creatine kinase (CK and calcium. Hemogram revealed anemia and leukocytosis; left humerus image analysis revealed an osteolytic lesion and cytology revealed a suppurative periostitis. Differential diagnosis was a nonspecific infectious inflammatory process or osteosarcoma. Since it was not possible to achieve a definitive diagnosis and there was a highly suspicious for an infectious agent, an agarose cell block of the bone marrow fine-needle aspiration was made. The cytological examination of cell block presented similar findings as described previously. However, additional stains including periodic acid-Schiff (PAS were positive for fungal hyphae, which rendered a diagnosis of fungal osteomyelitis due to Aspergillus spp. This case report illustrates an uncommon cause of osteomyelitis for breed that was diagnosed by an underused method in veterinary medicine.

  16. Quantitative assessment of probability of failing safely for the safety instrumented system using reliability block diagram method

    International Nuclear Information System (INIS)

    Jin, Jianghong; Pang, Lei; Zhao, Shoutang; Hu, Bin

    2015-01-01

    Highlights: • Models of PFS for SIS were established by using the reliability block diagram. • The more accurate calculation of PFS for SIS can be acquired by using SL. • Degraded operation of complex SIS does not affect the availability of SIS. • The safe undetected failure is the largest contribution to the PFS of SIS. - Abstract: The spurious trip of safety instrumented system (SIS) brings great economic losses to production. How to ensure the safety instrumented system is reliable and available has been put on the schedule. But the existing models on spurious trip rate (STR) or probability of failing safely (PFS) are too simplified and not accurate, in-depth studies of availability to obtain more accurate PFS for SIS are required. Based on the analysis of factors that influence the PFS for the SIS, using reliability block diagram method (RBD), the quantitative study of PFS for the SIS is carried out, and gives some application examples. The results show that, the common cause failure will increase the PFS; degraded operation does not affect the availability of the SIS; if the equipment was tested and repaired one by one, the unavailability of the SIS can be ignored; the corresponding occurrence time of independent safe undetected failure should be the system lifecycle (SL) rather than the proof test interval and the independent safe undetected failure is the largest contribution to the PFS for the SIS

  17. The Method of Manufacturing Nonmetallic Test-Blocks on Different Sensitivity Classes

    Science.gov (United States)

    Kalinichenko, N. P.; Kalinichenko, A. N.; Lobanova, I. S.; Zaitseva, A. A.; Loboda, E. L.

    2016-01-01

    Nowadays in our modern world there is a vital question of quality control of details made from nonmetallic materials due to their wide spreading. Nondestructive penetrant testing is effective, and in some cases it is the only possible method of accidents prevention at high- risk sites. A brief review of check sample necessary for quality evaluation of penetrant materials is considered. There was offered a way of making agents for quality of penetrant materials testing according to different liquid penetrant testing sensibility classes.

  18. Local censuses in the 18th century.

    Science.gov (United States)

    Law, C M

    1969-03-01

    Abstract Recent work on the population problems of the eighteenth century has been mainly based on the use of parish records. Another source, and one which, surprisingly, has received little attention is the local census. These are more numerous than is generally realised; and can be of great use in demographic studies. This paper examines 125 local censuses mainly taken in urban areas. They are discussed in terms of how they come to be taken, their reliability, extant manuscript material and their contents. Whilst most of the censuses confine themselves to the basic facts such as total population, number of houses and number of families, some give details of sex, age, marital status and occupation. Generally the information is given for the parish or local administrative unit, but in a few instances it is available by streets.

  19. Should aggregate US Census data be used as a proxy for individual household income in a birth defects registry?

    Science.gov (United States)

    Marengo, Lisa; Ramadhani, Tunu; Farag, Noha H; Canfield, Mark A

    2011-01-01

    Birth Defects Registries do not have access to income data and low household income is associated with adverse pregnancy outcomes of stillbirth, preterm birth, and birth defects. We compared 1999 income data from the National Birth Defects Prevention Study (NBDPS) with 2000 Census block group income data for the residence location of these same mothers. We geocoded 339 case mothers and 121 control mothers and assessed household income among case and control mothers by using NBDPS and census block group data. Correlation and concordance were assessed between the 2 data sources' household income data. The household income distribution was similar between case and control mothers within each data source. Both case and control mothers in the NBDPS's lowest household income category (income than was documented in their census block group's median household income (p-valueincome data (control mothers, rs=0.53; case mothers, rs=0.32). There was also poor to fair concordance between the 2 data sources (control mothers, kw=0.28; 95% CI=0.19-0.37 and case mothers, kw=0.18; 95% CI=0.13-0.24). These findings demonstrate dissimilar household incomes between NBDPS and census block group data. Caution should be used if block-level data is used as a proxy for individual-level household incomes in population-based birth defects surveillance and research.

  20. Investigation of the stability of blocks around underground openings by using the boundary element method

    Directory of Open Access Journals (Sweden)

    Murat Ünal

    2002-03-01

    Full Text Available In this study, a two-dimensional software was developed by using the boundary element method, in order to model and solve the rock mechanics problems encountered in surface and underground excavations. Stability of rock wedges formed at the roof of underground excavations were investigated in detail by using this software. The behaviour of the symmetric wedge on different joint stiffnesses was studied using a modified boundary element software. Then the results obtained were discussed and compared with the analytical solution, considering the surface tractions, shear stresses (developed along the discontinuity, wedge displacements and strains (along the wedge height.