WorldWideScience

Sample records for methodology section describes

  1. A methodology to describe process control requirements

    International Nuclear Information System (INIS)

    Carcagno, R.; Ganni, V.

    1994-01-01

    This paper presents a methodology to describe process control requirements for helium refrigeration plants. The SSC requires a greater level of automation for its refrigeration plants than is common in the cryogenics industry, and traditional methods (e.g., written descriptions) used to describe process control requirements are not sufficient. The methodology presented in this paper employs tabular and graphic representations in addition to written descriptions. The resulting document constitutes a tool for efficient communication among the different people involved in the design, development, operation, and maintenance of the control system. The methodology is not limited to helium refrigeration plants, and can be applied to any process with similar requirements. The paper includes examples

  2. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1975-11-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  3. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1976-05-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  4. Covariance Evaluation Methodology for Neutron Cross Sections

    Energy Technology Data Exchange (ETDEWEB)

    Herman,M.; Arcilla, R.; Mattoon, C.M.; Mughabghab, S.F.; Oblozinsky, P.; Pigni, M.; Pritychenko, b.; Songzoni, A.A.

    2008-09-01

    We present the NNDC-BNL methodology for estimating neutron cross section covariances in thermal, resolved resonance, unresolved resonance and fast neutron regions. The three key elements of the methodology are Atlas of Neutron Resonances, nuclear reaction code EMPIRE, and the Bayesian code implementing Kalman filter concept. The covariance data processing, visualization and distribution capabilities are integral components of the NNDC methodology. We illustrate its application on examples including relatively detailed evaluation of covariances for two individual nuclei and massive production of simple covariance estimates for 307 materials. Certain peculiarities regarding evaluation of covariances for resolved resonances and the consistency between resonance parameter uncertainties and thermal cross section uncertainties are also discussed.

  5. Comparative assessment of CFD Tools and the Eurocode Methodology in describing Externally Venting Flames

    Directory of Open Access Journals (Sweden)

    Asimakopoulou Eleni K.

    2013-11-01

    Full Text Available The ability of currently available Computational Fluid Dynamics (CFD tools to adequately describe Externally Venting Flames (EVF is assessed, aiming to demonstrate compliance with performance-based fire safety regulations. The Fire Dynamics Simulator (FDS CFD tool is used to simulate the EVF characteristics in a corridor-compartment-façade configuration exposed to natural fire conditions. Numerical results of the temporal evolution of gas velocity, gas temperatures and flame shape are obtained for both the interior and the exterior of the compartment. Predictions are compared to respective experimental data, as well as to correlations suggested by the Eurocode methodology. The effects of ventilation conditions are investigated by simulating both Forced Draught (FD and No Forced Draught (NoFD test cases. The obtained results suggest that currently available CFD tools are capable of achieving good qualitative agreement with experimental data and, in certain cases (e.g. FD conditions, adequate quantitative agreement, that generally outperforms the Eurocode prescriptive methodology.

  6. Methodological Bases for Describing Risks of the Enterprise Business Model in Integrated Reporting

    Directory of Open Access Journals (Sweden)

    Nesterenko Oksana O.

    2017-12-01

    Full Text Available The aim of the article is to substantiate the methodological bases for describing the business and accounting risks of an enterprise business model in integrated reporting for their timely detection and assessment, and develop methods for their leveling or minimizing and possible prevention. It is proposed to consider risks in the process of forming integrated reporting from two sides: first, risks that arise in the business model of an organization and should be disclosed in its integrated report; second, accounting risks of integrated reporting, which should be taken into account by members of the cross-sectoral working group and management personnel in the process of forming and promulgating integrated reporting. To develop an adequate accounting and analytical tool for disclosure of information about the risks of the business model and integrated reporting, their leveling or minimization, in the article a terminological analysis of the essence of entrepreneurial and accounting risks is carried out. The entrepreneurial risk is defined as an objective-subjective economic category that characterizes the probability of negative or positive consequences of economic-social-ecological activity within the framework of the business model of an enterprise under uncertainty. The accounting risk is suggested to be understood as the probability of unfavorable consequences as a result of organizational, methodological errors in the integrated accounting system, which present threat to the quality, accuracy and reliability of the reporting information on economic, social and environmental activities in integrated reporting as well as threat of inappropriate decision-making by stakeholders based on the integrated report. For the timely identification of business risks and maximum leveling of the influence of accounting risks on the process of formation and publication of integrated reporting, in the study the place of entrepreneurial and accounting risks in

  7. A Pebble Bed Reactor cross section methodology

    International Nuclear Information System (INIS)

    Hudson, Nathanael H.; Ougouag, Abderrafi M.; Rahnema, Farzad; Gougar, Hans

    2009-01-01

    A method is presented for the evaluation of microscopic cross sections for the Pebble Bed Reactor (PBR) neutron diffusion computational models during convergence to an equilibrium (asymptotic) fuel cycle. This method considers the isotopics within a core spectral zone and the leakages from such a zone as they arise during reactor operation. The randomness of the spatial distribution of fuel grains within the fuel pebbles and that of the fuel and moderator pebbles within the core, the double heterogeneity of the fuel, and the indeterminate burnup of the spectral zones all pose a unique challenge for the computation of the local microscopic cross sections. As prior knowledge of the equilibrium composition and leakage is not available, it is necessary to repeatedly re-compute the group constants with updated zone information. A method is presented to account for local spectral zone composition and leakage effects without resorting to frequent spectrum code calls. Fine group data are pre-computed for a range of isotopic states. Microscopic cross sections and zone nuclide number densities are used to construct fine group macroscopic cross sections, which, together with fission spectra, flux modulation factors, and zone buckling, are used in the solution of the slowing down balance to generate a new or updated spectrum. The microscopic cross-sections are then re-collapsed with the new spectrum for the local spectral zone. This technique is named the Spectral History Correction (SHC) method. It is found that this method accurately recalculates local broad group microscopic cross sections. Significant improvement in the core eigenvalue, flux, and power peaking factor is observed when the local cross sections are corrected for the effects of the spectral zone composition and leakage in two-dimensional PBR test problems.

  8. The Behavior of Procurement Process as Described by Using System Dynamics Methodology

    OpenAIRE

    Mohd Yusoff, Mohd Izhan

    2018-01-01

    System dynamics methodology has been used in many fields of study which include supply chain, project management and performance, and procurement process. The said methodology enables the researchers to identify and study the impact of the variables or factors on the outcome of the model they developed. In this paper, we showed the use of system dynamics methodology in studying the behavior of procurement process that is totally different from those mentioned in previous studies. By using a t...

  9. PIA and REWIND: Two New Methodologies for Cross Section Adjustment

    Energy Technology Data Exchange (ETDEWEB)

    Palmiotti, G.; Salvatores, M.

    2017-02-01

    This paper presents two new cross section adjustment methodologies intended for coping with the problem of compensations. The first one PIA, Progressive Incremental Adjustment, gives priority to the utilization of experiments of elemental type (those sensitive to a specific cross section), following a definite hierarchy on which type of experiment to use. Once the adjustment is performed, both the new adjusted data and the new covariance matrix are kept. The second methodology is called REWIND (Ranking Experiments by Weighting for Improved Nuclear Data). This new proposed approach tries to establish a methodology for ranking experiments by looking at the potential gain they can produce in an adjustment. Practical applications for different adjustments illustrate the results of the two methodologies against the current one and show the potential improvement for reducing uncertainties in target reactors.

  10. 26 CFR 1.509(a)-2 - Exclusion for certain organizations described in section 170(b)(1)(A).

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Exclusion for certain organizations described in....509(a)-2 Exclusion for certain organizations described in section 170(b)(1)(A). (a) General rule. Organizations described in section 170(b)(1)(A) (other than in clauses (vii) and (viii)) are excluded from the...

  11. Applying Lean Six Sigma methodology to reduce cesarean section rate.

    Science.gov (United States)

    Chai, Ze-Ying; Hu, Hua-Min; Ren, Xiu-Ling; Zeng, Bao-Jin; Zheng, Ling-Zhi; Qi, Feng

    2017-06-01

    This study aims to reduce cesarean section rate and increase rate of vaginal delivery. By using Lean Six Sigma (LSS) methodology, the cesarean section rate was investigated and analyzed through a 5-phase roadmap consisting of Define, Measure, Analyze, Improve, and Control. The principal causes of cesarean section were identified, improvement measures were implemented, and the rate of cesarean section before and after intervention was compared. After patients with a valid medical reason for cesarean were excluded, the main causes of cesarean section were maternal request, labor pain, parturient women assessment, and labor observation. A series of measures was implemented, including an improved parturient women assessment system, strengthened pregnancy nutrition guidance, implementation of painless labor techniques, enhanced midwifery team building, and promotion of childbirth-assist skills. Ten months after introduction of the improvement measures, the cesarean section rate decreased from 41.83% to 32.00%, and the Six Sigma score (ie, Z value) increased from 1.706 to 1.967 (P < .001). LSS is an effective way to reduce the rate of cesarean section. © 2016 John Wiley & Sons, Ltd.

  12. Describing the association between socioeconomic inequalities and cancer survival: methodological guidelines and illustration with population-based data

    Directory of Open Access Journals (Sweden)

    Belot A

    2018-05-01

    Full Text Available Aurélien Belot,1-3 Laurent Remontet,3,4 Bernard Rachet,1 Olivier Dejardin,5,6 Hadrien Charvat,7 Simona Bara,8 Anne-Valérie Guizard,5,9 Laurent Roche,3,4 Guy Launoy,5,6 Nadine Bossard3,4 1Cancer Survival Group, Department of Non-Communicable Disease Epidemiology, Faculty of Epidemiology and Population Health, London School of Hygiene and Tropical Medicine, London, United Kingdom; 2Non-Communicable Diseases and Trauma Direction, The French Public Health Agency, Saint-Maurice, France; 3Department of Biostatistics and Bioinformatics, Hospices Civils de Lyon, Lyon, France; 4UMR 5558, Biometry and Evolutionary Biology Laboratory, Biostatistics Health Group, CNRS, University Lyon 1, Lyon, France; 5National Institute of Health and Medical Research U1086 ANTICIPE, Caen, France; 6Calvados Digestive Cancer Registry, Centre Hospitalier Universitaire, Caen, France; 7Prevention Division, Center for Public Health Sciences, National Cancer Center, Tokyo, Japan; 8Manche General Cancer Registry, Centre Hospitalier Public du Cotentin, Cherbourg-en-Cotentin, France; 9Calvados General Cancer Registry, Centre François Baclesse, Caen, France Background: Describing the relationship between socioeconomic inequalities and cancer survival is important but methodologically challenging. We propose guidelines for addressing these challenges and illustrate their implementation on French population-based data. Methods: We analyzed 17 cancers. Socioeconomic deprivation was measured by an ecological measure, the European Deprivation Index (EDI. The Excess Mortality Hazard (EMH, ie, the mortality hazard among cancer patients after accounting for other causes of death, was modeled using a flexible parametric model, allowing for nonlinear and/or time-dependent association between the EDI and the EMH. The model included a cluster-specific random effect to deal with the hierarchical structure of the data. Results: We reported the conventional age-standardized net survival (ASNS

  13. Fusion Blanket Coolant Section Criteria, Methodology, and Results

    Energy Technology Data Exchange (ETDEWEB)

    DeMuth, J. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meier, W. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jolodosky, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Frantoni, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reyes, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-02

    The focus of this LDRD was to explore potential Li alloys that would meet the tritium breeding and blanket cooling requirements but with reduced chemical reactivity, while maintaining the other attractive features of pure Li breeder/coolant. In other fusion approaches (magnetic fusion energy or MFE), 17Li- 83Pb alloy is used leveraging Pb’s ability to maintain high TBR while lowering the levels of lithium in the system. Unfortunately this alloy has a number of potential draw-backs. Due to the high Pb content, this alloy suffers from very high average density, low tritium solubility, low system energy, and produces undesirable activation products in particular polonium. The criteria considered in the selection of a tritium breeding alloy are described in the following section.

  14. Video ethnography during and after caesarean sections: methodological challenges.

    Science.gov (United States)

    Stevens, Jeni; Schmied, Virginia; Burns, Elaine; Dahlen, Hannah G

    2017-07-01

    To describe the challenges of, and steps taken to successfully collect video ethnographic data during and after caesarean sections. Video ethnographic research uses real-time video footage to study a cultural group or phenomenon in the natural environment. It allows researchers to discover previously undocumented practices, which in-turn provides insight into strengths and weaknesses in practice. This knowledge can be used to translate evidence-based interventions into practice. Video ethnographic design. A video ethnographic approach was used to observe the contact between mothers and babies immediately after elective caesarean sections in a tertiary hospital in Sydney, Australia. Women, their support people and staff participated in the study. Data were collected via video footage and field notes in the operating theatre, recovery and the postnatal ward. Challenges faced whilst conducting video ethnographic research included attaining ethics approval, recruiting vast numbers of staff members and 'vulnerable' pregnant women, and endeavouring to be a 'fly on the wall' and a 'complete observer'. There were disadvantages being an 'insider' whilst conducting the research because occasionally staff members requested help with clinical tasks whilst collecting data; however, it was an advantage as it enabled ease of access to the environment and staff members that were to be recruited. Despite the challenges, video ethnographic research enabled the provision of unique data that could not be attained by any other means. Video ethnographic data are beneficial as it provides exceptionally rich data for in-depth analysis of interactions between the environment, equipment and people in the hospital environment. The analysis of this type of data can then be used to inform improvements for future care. © 2016 John Wiley & Sons Ltd.

  15. Methodology series module 3: Cross-sectional studies

    Directory of Open Access Journals (Sweden)

    Maninder Singh Setia

    2016-01-01

    Full Text Available Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status or cohort studies (participants selected based on the exposure status, the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

  16. Methodology Series Module 3: Cross-sectional Studies.

    Science.gov (United States)

    Setia, Maninder Singh

    2016-01-01

    Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

  17. Methodology of failed section location in case of leaks in PGN-200M sectional steam generator

    International Nuclear Information System (INIS)

    Kuznetsov, A.A.; Govorov, P.P.; Nosov, Yu.V.; Karavaev, A.P.

    2009-01-01

    The article considers a way of the failed section location when indications of water-sodium reaction emerge in PGN-200M sectional steam generator of the BN-600 power unit. The selection of diagnostic parameters used to locate the failed section is justified. Various alternative locations of leaks have been simulated [ru

  18. METHODOLOGY OF DETERMINATION OF ADMISSIBLE SPEEDS OF TRAIN MOVEMENT ON DIFFICULT SECTIONS OF RAILROAD PLAN

    Directory of Open Access Journals (Sweden)

    M. B. Kurhan

    2014-03-01

    Full Text Available Purpose. Determination of improvement ways of admissible speeds of train movement on the difficult sections of а railroad plan. Methodology. Mathematical modeling of the train traffic is used to achieve the purpose of research. The average weighted speed and elevation of outer rail is predicted on this basis. Findings. The case analysis of the speeds determination in curved sections of track was carried out. The above mentioned track sections adversely affect the ride comfort and the intensity of the way disorder, as well as the reasons that contribute to the speed limits traffic on the railways of Ukraine. The technique of performing the calculations for determining the permissible train speeds was developed and tested on real curves of railways, were the accelerated movement of trains was introduced. Proposals on automate calculations in distances and services by way of determining the permissible speeds in curves were developed. Originality. Methodology of determining the permissible motion speeds and elevation of outer rails on the difficult sections of the railway plan was developed. This approach allows you to get a rational decisions on reorganization of plan based on local conditions. Practical value. The developed technique of definition of admissible speeds of motion in curves was implemented as a program DopShvid. The program was tested on real railway sections, where the accelerated train motion was introduced.

  19. A methodology to leverage cross-sectional accelerometry to capture weather's influence in active living research.

    Science.gov (United States)

    Katapally, Tarun R; Rainham, Daniel; Muhajarine, Nazeem

    2016-06-27

    While active living interventions focus on modifying urban design and built environment, weather variation, a phenomenon that perennially interacts with these environmental factors, is consistently underexplored. This study's objective is to develop a methodology to link weather data with existing cross-sectional accelerometry data in capturing weather variation. Saskatoon's neighbourhoods were classified into grid-pattern, fractured grid-pattern and curvilinear neighbourhoods. Thereafter, 137 Actical accelerometers were used to derive moderate to vigorous physical activity (MVPA) and sedentary behaviour (SB) data from 455 children in 25 sequential one-week cycles between April and June, 2010. This sequential deployment was necessary to overcome the difference in the ratio between the sample size and the number of accelerometers. A data linkage methodology was developed, where each accelerometry cycle was matched with localized (Saskatoon-specific) weather patterns derived from Environment Canada. Statistical analyses were conducted to depict the influence of urban design on MVPA and SB after factoring in localized weather patterns. Integration of cross-sectional accelerometry with localized weather patterns allowed the capture of weather variation during a single seasonal transition. Overall, during the transition from spring to summer in Saskatoon, MVPA increased and SB decreased during warmer days. After factoring in localized weather, a recurring observation was that children residing in fractured grid-pattern neighbourhoods accumulated significantly lower MVPA and higher SB. The proposed methodology could be utilized to link globally available cross-sectional accelerometry data with place-specific weather data to understand how built and social environmental factors interact with varying weather patterns in influencing active living.

  20. An ultrasonic methodology for muscle cross section measurement of support space flight

    Science.gov (United States)

    Hatfield, Thomas R.; Klaus, David M.; Simske, Steven J.

    2004-09-01

    The number one priority for any manned space mission is the health and safety of its crew. The study of the short and long term physiological effects on humans is paramount to ensuring crew health and mission success. One of the challenges associated in studying the physiological effects of space flight on humans, such as loss of bone and muscle mass, has been that of readily attaining the data needed to characterize the changes. The small sampling size of astronauts, together with the fact that most physiological data collection tends to be rather tedious, continues to hinder elucidation of the underlying mechanisms responsible for the observed changes that occur in space. Better characterization of the muscle loss experienced by astronauts requires that new technologies be implemented. To this end, we have begun to validate a 360° ultrasonic scanning methodology for muscle measurements and have performed empirical sampling of a limb surrogate for comparison. Ultrasonic wave propagation was simulated using 144 stations of rotated arm and calf MRI images. These simulations were intended to provide a preliminary check of the scanning methodology and data analysis before its implementation with hardware. Pulse-echo waveforms were processed for each rotation station to characterize fat, muscle, bone, and limb boundary interfaces. The percentage error between MRI reference values and calculated muscle areas, as determined from reflection points for calf and arm cross sections, was -2.179% and +2.129%, respectively. These successful simulations suggest that ultrasound pulse scanning can be used to effectively determine limb cross-sectional areas. Cross-sectional images of a limb surrogate were then used to simulate signal measurements at several rotation angles, with ultrasonic pulse-echo sampling performed experimentally at the same stations on the actual limb surrogate to corroborate the results. The objective of the surrogate sampling was to compare the signal

  1. Methodology to carry out a sensitivity and uncertainty analysis for cross sections using a coupled model Trace-Parcs

    International Nuclear Information System (INIS)

    Reyes F, M. C.; Del Valle G, E.; Gomez T, A. M.; Sanchez E, V.

    2015-09-01

    A methodology was implemented to carry out a sensitivity and uncertainty analysis for cross sections used in a coupled model for Trace/Parcs in a transient of control rod fall of a BWR-5. A model of the reactor core for the neutronic code Parcs was used, in which the assemblies located in the core are described. Thermo-hydraulic model in Trace was a simple model, where only a component type Chan was designed to represent all the core assemblies, which it was within a single vessel and boundary conditions were established. The thermo-hydraulic part was coupled with the neutron part, first for the steady state and then a transient of control rod fall was carried out for the sensitivity and uncertainty analysis. To carry out the analysis of cross sections used in the coupled model Trace/Parcs during the transient, the Probability Density Functions for 22 parameters selected from the total of neutronic parameters that use Parcs were generated, obtaining 100 different cases for the coupled model Trace/Parcs, each one with a database of different cross sections. All these cases were executed with the coupled model, obtaining in consequence 100 different output files for the transient of control rod fall doing emphasis in the nominal power, for which an uncertainty analysis was realized at the same time generate the band of uncertainty. With this analysis is possible to observe the ranges of results of the elected responses varying the selected uncertainty parameters. The sensitivity analysis complements the uncertainty analysis, identifying the parameter or parameters with more influence on the results and thus focuses on these parameters in order to better understand their effects. Beyond the obtained results, because is not a model with real operation data, the importance of this work is to know the application of the methodology to carry out the sensitivity and uncertainty analyses. (Author)

  2. Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

    Science.gov (United States)

    Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

    2012-11-01

    Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Parental use of the term "Hot Qi" to describe symptoms in their children in Hong Kong: a cross sectional survey "Hot Qi" in children

    Directory of Open Access Journals (Sweden)

    Chan Danny

    2006-01-01

    Full Text Available Abstract Background The Chinese term "Hot Qi" is often used by parents to describe symptoms in their children. The current study was carried out to estimate the prevalence of using the Chinese term "Hot Qi" to describe symptoms in children by their parents and the symptomatology of "Hot Qi". Method A cross sectional survey by face-to-face interview with a semi-structured questionnaire was carried out in a public hospital and a private clinic in Hong Kong. The parental use of the term "Hot Qi", the symptoms of "Hot Qi" and the remedies used for "Hot Qi" were asked. Results 1060 pairs of children and parents were interviewed. 903 (85.1% of parents claimed that they had employed the term "Hot Qi" to describe their children's symptoms. Age of children and place of birth of parents were the predictors of parents using the term "Hot Qi". Eye discharge (37.2%, sore throat (33.9%, halitosis(32.8%, constipation(31.0%, and irritable (21.2% were the top five symptoms of "Hot Qi" in children. The top five remedies for "Hot Qi" were the increased consumption of water (86.8%, fruit (72.5%, soup (70.5%, and the use of herbal beverages "five-flower- tea" (a combination of several flowers such as Chrysanthemum morifolii, Lonicera japonica, Bombax malabaricum, Sophora japonica, and Plumeria rubra (57.6% or selfheal fruit spike (Prunella vulgaris (42.4%. Conclusion "Hot Qi" is often used by Chinese parents to describe symptoms in their children in Hong Kong. Place of birth of parents and age of the children are main factors for parents to apply the term "Hot Qi" to describe symptoms of their children. The common symptoms of "Hot Qi" suggest infections or allergy.

  4. An automated segmentation methodology for quantifying immunoreactive puncta number and fluorescence intensity in tissue sections.

    Science.gov (United States)

    Fish, Kenneth N; Sweet, Robert A; Deo, Anthony J; Lewis, David A

    2008-11-13

    A number of human brain diseases have been associated with disturbances in the structure and function of cortical synapses. Answering fundamental questions about the synaptic machinery in these disease states requires the ability to image and quantify small synaptic structures in tissue sections and to evaluate protein levels at these major sites of function. We developed a new automated segmentation imaging method specifically to answer such fundamental questions. The method takes advantage of advances in spinning disk confocal microscopy, and combines information from multiple iterations of a fluorescence intensity/morphological segmentation protocol to construct three-dimensional object masks of immunoreactive (IR) puncta. This new methodology is unique in that high- and low-fluorescing IR puncta are equally masked, allowing for quantification of the number of fluorescently-labeled puncta in tissue sections. In addition, the shape of the final object masks highly represents their corresponding original data. Thus, the object masks can be used to extract information about the IR puncta (e.g., average fluorescence intensity of proteins of interest). Importantly, the segmentation method presented can be easily adapted for use with most existing microscopy analysis packages.

  5. Luminescence dating of the Zeketai loess section in the Ili Basin, northwestern China: Methodological considerations

    Science.gov (United States)

    Qin, Jintang; Zhou, Liping

    2018-04-01

    Loess deposits in Xinjiang, northwestern China are ideal archives for past environmental changes in the Westerlies-dominated central Asia. Among previous luminescence dating studies of loess in Xinjiang, few have attempted to systematically investigate the methodological aspects. In this study, we report results of a multiple-procedure luminescence dating of the Zeketai loess section in the Ili Basin, central Xinjiang. Optically stimulated luminescence (OSL) and post-infrared infrared stimulated luminescence (pIRIR) signals were used for quartz and polymineral grains of different sizes. The pIRIR ages obtained with two protocols agree well with each other and constrain the loess deposition between 50 ka and 88 ka. The OSL ages of fine-grained quartz are in stratigraphic order and range from 37 ka to 61 ka, but are ∼30% younger than the pIRIR295 ages of both fine and medium grained polyminerals. Although the causes of the discrepancy between the ages derived from different luminescence dating protocols are still to be understood, we stress that the quartz OSL ages of loess in this region are likely to be underestimated, especially for samples older than 40 ka. The polymineral or potassium feldspar pIRIR signal is recommended for dating loess in the Ili Basin, at least as an internal check.

  6. Summary Describing Integration of ERM Methodology into Supervisory Control Framework with Software Package Documentation; Advanced Reactor Technology Milestone: M4AT-16PN2301052

    Energy Technology Data Exchange (ETDEWEB)

    Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Veeramany, Arun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bonebrake, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-20

    This project involved the development of enhanced risk monitors (ERMs) for active components in Advanced Reactor (AdvRx) designs by integrating real-time information about equipment condition with risk monitors. Health monitoring techniques in combination with predictive estimates of component failure based on condition and risk monitors can serve to indicate the risk posed by continued operation in the presence of detected degradation. This combination of predictive health monitoring based on equipment condition assessment and risk monitors can also enable optimization of maintenance scheduling with respect to the economics of plant operation. This report summarizes PNNL’s multi-year project on the development and evaluation of an ERM concept for active components while highlighting FY2016 accomplishments. Specifically, this report provides a status summary of the integration and demonstration of the prototypic ERM framework with the plant supervisory control algorithms being developed at Oak Ridge National Laboratory (ORNL), and describes additional case studies conducted to assess sensitivity of the technology to different quantities. Supporting documentation on the software package to be provided to ONRL is incorporated in this report.

  7. Local health department epidemiologic capacity: a stratified cross-sectional assessment describing the quantity, education, training, and perceived competencies of epidemiologic staff.

    Science.gov (United States)

    O'Keefe, Kaitlin A; Shafir, Shira C; Shoaf, Kimberley I

    2013-01-01

    Local health departments (LHDs) must have sufficient numbers of staff functioning in an epidemiologic role with proper education, training, and skills to protect the health of communities they serve. This pilot study was designed to describe the composition, training, and competency level of LHD staff and examine the hypothesis that potential disparities exist between LHDs serving different sized populations. Cross-sectional surveys were conducted with directors and epidemiologic staff from a sample of 100 LHDs serving jurisdictions of varied sizes. Questionnaires included inquiries regarding staff composition, education, training, and measures of competency modeled on previously conducted studies by the Council of State and Territorial Epidemiologists. Number of epidemiologic staff, academic degree distribution, epidemiologic training, and both director and staff confidence in task competencies were calculated for each LHD size strata. Disparities in measurements were observed in LHDs serving different sized populations. LHDs serving small populations reported a smaller average number of epidemiologic staff than those serving larger jurisdictions. As size of population served increased, percentages of staff and directors holding bachelors' and masters' degrees increased, while those holding RN degrees decreased. A higher degree of perceived competency of staff in most task categories was reported in LHDs serving larger populations. LHDs serving smaller populations reported fewer epidemiologic staff, therefore might benefit from additional resources. Differences observed in staff education, training, and competencies suggest that enhanced epidemiologic training might be particularly needed in LHDs serving smaller populations. RESULTS can be used as a baseline for future research aimed at identifying areas where training and personnel resources might be particularly needed to increase the capabilities of LHDs.

  8. Development of a cross-section methodology and a real-time core model for VVER-1000 simulator application

    Energy Technology Data Exchange (ETDEWEB)

    Georgieva, Emiliya Lyudmilova

    2016-06-06

    The novel academic contributions are summarized as follows. A) A cross-section modelling methodology and a cycle-specific cross-section update procedure are developed to meet fidelity requirements applicable to a cycle-specific reactor core simulation, as well as particular customer needs and practices supporting VVER-1000 operation and safety. B) A real-time version of the Nodal Expansion Method code is developed and implemented into Kozloduy 6 full-scope replica control room simulator.

  9. Polynomial expansion methodology for microscopic cross sections to use in spatial burnup calculations

    International Nuclear Information System (INIS)

    Conti Filho, P.; Oliveira Barroso, A.C. de

    1985-01-01

    It was developed a computer code to generate polynomial coefficients which represent homogenized microscopic cross sections in function of the local accumulated burnup and concentration of soluble boron, presented in fuel element, for each step of burnup reactor. Afterward, it was developed a coupling between LEOPARD-GERADOR DE POLINOMIOS - CITATION computer codes to interpret and build homogenized microscopic cross sections according with local characteristics of each fuel element during the burnup calculation of reactor core. (M.C.K.) [pt

  10. Application of the SAMINT methodology to the new cross section evaluations of 63Cu and 65Cu∗

    Directory of Open Access Journals (Sweden)

    Sobes Vladimir

    2017-01-01

    Full Text Available The SAMINT methodology allows coupling of differential and integral data evaluations in a continuous-energy framework. Prior to development of the SAMINT code, integral experimental data such as in the International Criticality Safety Benchmark Experiments Project remained a tool for validation of completed nuclear data evaluations. Now, SAMINT extracts information from integral benchmarks in the form of calculated sensitivity coefficients by Monte Carlo codes such as CE TSUNAMI-3D or MCNP6 and combines it with the results of experimental cross section measurements to produce an updated cross section evaluation utilizing information from both sets of data. The use of the generalized linear least squares methodology ensures that proper weight is given to both the differential and integral data. SAMINT is not intended to bias nuclear data toward specific integral experiments, but it should be used to supplement evaluation of differential experimental data. This work demonstrates the application of the SAMINT methodology to the new Oak Ridge National Laboratory (ORNL evaluations of the resonance parameters for two isotopes of copper: 63Cu and 65Cu.

  11. Reduction methodology for reaction cross sections induced by weakly bound nuclei

    International Nuclear Information System (INIS)

    Deshmukh, N.N.; Mukherjee, S.; Appannababu, S.; Guimaraees, V.; Lubian, J.; Gomes, P.R.S.

    2009-01-01

    The interest in nuclear reactions with weakly bound nuclei has increased considerably along the last decade. Several experiments with stable and unstable projectiles have been performed and a variety of theoretical approaches have been developed. In particular, fusion and breakup reactions induced by such projectiles have been the object of several studies. Owing to the weak binding of the projectile, the breakup cross section may be quite large and coupling with the breakup channel can strongly affect the fusion cross section at near barrier energies. This influence stems from two effects, one of a static and the other of a dynamic nature, which are, however, not easy to be disentangled. The static effect results from the more diffuse density of the weakly bound nuclei, as compared with a strongly bound one. The contribution from weakly bound nucleons to the nuclear density extends further out and this gives rise to a lower and thicker potential barrier. There is general understanding that this static effect enhances the fusion cross section at near barrier energies. On the other hand, there is the dynamic effect corresponding to the coupling with the breakup channel. It is well known that the coupling with a finite number of bound channels enhances the sub-barrier fusion cross section. However, the effect of coupling to channels in the continuum (breakup) is controversial. In first place, one should have in mind that there are different fusion processes in collisions of weakly bound projectiles. One of such processes is the complete fusion, which takes place when the whole mass of the projectile fuses with the target. There may be fusion following breakup. In this case, the compound nucleus may contain the whole mass of the projectile (through sequential fusion of the fragments), or some fragment can escape the interaction region. The former corresponds also to complete fusion (sequential complete fusion) while the latter is known as incomplete fusion. So far

  12. Methodological study of the adjustment of multigroup cross sections for fast reactors, by means of integral data

    International Nuclear Information System (INIS)

    Bastos, H.F.B.N.

    1979-01-01

    In this work a study of the methodology of the adjustment of multigroup cross sections by means of integral data is presented. A synthesis of the principal methods existent and the mathematical development of the adaptation of one of them are made. A calculational system is built from this reference method, with the basic conditions for the operation of the process of adjustment. In order to test the system developed and analyze several problems related to the adjustment, a series of trial adjustments was made with the value of the U 235 fission cross section from the infinite dilution library used in the calculational system for fast reactors of the Instituto de Engenharia Nuclear. (author)

  13. New Described Dermatological Disorders

    Directory of Open Access Journals (Sweden)

    Müzeyyen Gönül

    2014-01-01

    Full Text Available Many advances in dermatology have been made in recent years. In the present review article, newly described disorders from the last six years are presented in detail. We divided these reports into different sections, including syndromes, autoinflammatory diseases, tumors, and unclassified disease. Syndromes included are “circumferential skin creases Kunze type” and “unusual type of pachyonychia congenita or a new syndrome”; autoinflammatory diseases include “chronic atypical neutrophilic dermatosis with lipodystrophy and elevated temperature (CANDLE syndrome,” “pyoderma gangrenosum, acne, and hidradenitis suppurativa (PASH syndrome,” and “pyogenic arthritis, pyoderma gangrenosum, acne, and hidradenitis suppurativa (PAPASH syndrome”; tumors include “acquired reactive digital fibroma,” “onychocytic matricoma and onychocytic carcinoma,” “infundibulocystic nail bed squamous cell carcinoma,” and “acral histiocytic nodules”; unclassified disorders include “saurian papulosis,” “symmetrical acrokeratoderma,” “confetti-like macular atrophy,” and “skin spicules,” “erythema papulosa semicircularis recidivans.”

  14. EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY project: Design and methodology of the ENERGY cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Moreno Luis

    2011-01-01

    Full Text Available Abstract Background Obesity treatment is by large ineffective long term, and more emphasis on the prevention of excessive weight gain in childhood and adolescence is warranted. To inform energy balance related behaviour (EBRB change interventions, insight in the potential personal, family and school environmental correlates of these behaviours is needed. Studies on such multilevel correlates of EBRB among schoolchildren in Europe are lacking. The ENERGY survey aims to (1 provide up-to-date prevalence rates of measured overweight, obesity, self-reported engagement in EBRBs, and objective accelerometer-based assessment of physical activity and sedentary behaviour and blood-sample biomarkers of metabolic function in countries in different regions of Europe, (2 to identify personal, family and school environmental correlates of these EBRBs. This paper describes the design, methodology and protocol of the survey. Method/Design A school-based cross-sectional survey was carried out in 2010 in seven different European countries; Belgium, Greece, Hungary, the Netherlands, Norway, Slovenia, and Spain. The survey included measurements of anthropometrics, child, parent and school-staff questionnaires, and school observations to measure and assess outcomes (i.e. height, weight, and waist circumference, EBRBs and potential personal, family and school environmental correlates of these behaviours including the social-cultural, physical, political, and economic environmental factors. In addition, a selection of countries conducted accelerometer measurements to objectively assess physical activity and sedentary behaviour, and collected blood samples to assess several biomarkers of metabolic function. Discussion The ENERGY survey is a comprehensive cross-sectional study measuring anthropometrics and biomarkers as well as assessing a range of EBRBs and their potential correlates at the personal, family and school level, among 10-12 year old children in seven

  15. Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool.

    Science.gov (United States)

    Ho, Robin S T; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel Y S; Chung, Vincent C H

    2015-01-08

    Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. To assess the methodological quality of MAs on COPD treatments. A cross-sectional study on MAs of COPD trials. MAs published during 2000-2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods.

  16. Pharmacobezoars described and demystified.

    Science.gov (United States)

    Simpson, Serge-Emile

    2011-02-01

    A bezoar is a concretion of foreign material that forms and persists in the gastrointestinal tract. Bezoars are classified by their material origins. Phytobezoars contain plant material, trichobezoars contain hair, lactobezoars contain milk proteins, and pharmacobezoars contain pharmaceutical products. Tablets, suspensions, and even insoluble drug delivery vehicles can, on rare occasions, and sometimes under specific circumstances, form pharmacobezoars. The goal of this review is to catalog and examine all of the available reports in the English language medical literature that convincingly describe the formation and management of pharmacobezoars. Articles included in this review were identified by performing searches using the terms "bezoar," "pharmacobezoar," and "concretion" in the following databases: OVID MEDLINE, PubMed, and JSTOR. The complete MEDLINE and JSTOR holdings were included in the search without date ranges. The results were limited to English language publications. Articles that described nonmedication bezoars were not included in the review. Articles describing phytobezoars, food bezoars, fecal impactions, illicit drug packet ingestions, enteral feeding material bezoars, and hygroscopic diet aid bezoars were excluded. The bibliographic references within the articles already accumulated were then examined in order to gather additional pharmacobezoar cases. The cases are grouped by pharmaceutical agent that formed the bezoar, and groupings are arranged in alphabetical order. Discussions and conclusions specific to each pharmaceutical agent are included in that agent's subheading. Patterns and themes that emerged in the review of the assembled case reports are reviewed and presented in a more concise format. Pharmacobezoars form under a wide variety of circumstances and in a wide variety of patients. They are difficult to diagnose reliably. Rules for suspecting, diagnosing, and properly managing a pharmacobezoar are highly dependent on the

  17. Describing to compute

    Directory of Open Access Journals (Sweden)

    Adriana Rossi

    2012-06-01

    Full Text Available In this paper the advantages due to the possibility of generating complex surfaces starting from bi-dimensional geometries by means of CAD softwares are discussed. Two case studies are presented to show the hypothetical variation of three primary choice cycles. The study of basic geometries (a, paths where the geometries are swept along (b, places occupied by the sections lofting the paths (c. The strong innovation contained in the continuity of invention process is deeply appreciated. This is especially true when that process is not the result of habit and finds its roots in the principles and in the criteria of geometry. Nothing is left to improvisation in this discipline: every concept is based on mathematical calculus.

  18. [Deep mycoses rarely described].

    Science.gov (United States)

    Charles, D

    1986-01-01

    Beside deep mycoses very well known: histoplasmosis, candidosis, cryptococcosis, there are other mycoses less frequently described. Some of them are endemic in some countries: South American blastomycosis in Brazil, coccidioidomycosis in California; some others are cosmopolitan and may affect everyone: sporotrichosis, or may affect only immunodeficient persons: mucormycosis. They do not spare Africa, we may encounter basidiobolomycosis, rhinophycomycosis, dermatophytosis, sporotrichosis and, more recently reported, rhinosporidiosis. Important therapeutic progresses have been accomplished with amphotericin B and with antifungus imidazole compounds (miconazole and ketoconazole). Surgical intervention is sometime recommended in chromomycosis and rhinosporidiosis.

  19. FDAAA legislation is working, but methodological flaws undermine the reliability of clinical trials: a cross-sectional study

    OpenAIRE

    Douglas H. Marin dos Santos; Álvaro N. Atallah

    2015-01-01

    The relationship between clinical research and the pharmaceutical industry has placed clinical trials in jeopardy. According to the medical literature, more than 70% of clinical trials are industry-funded. Many of these trials remain unpublished or have methodological flaws that distort their results. In 2007, it was signed into law the Food and Drug Administration Amendments Act (FDAAA), aiming to provide publicly access to a broad range of biomedical information to be made available on the ...

  20. A cross-sectional survey of 5-year-old children with non-syndromic unilateral cleft lip and palate: the Cleft Care UK study. Part 1: background and methodology.

    Science.gov (United States)

    Persson, M; Sandy, J R; Waylen, A; Wills, A K; Al-Ghatam, R; Ireland, A J; Hall, A J; Hollingworth, W; Jones, T; Peters, T J; Preston, R; Sell, D; Smallridge, J; Worthington, H; Ness, A R

    2015-11-01

    We describe the methodology for a major study investigating the impact of reconfigured cleft care in the United Kingdom (UK) 15 years after an initial survey, detailed in the Clinical Standards Advisory Group (CSAG) report in 1998, had informed government recommendations on centralization. This is a UK multicentre cross-sectional study of 5-year-olds born with non-syndromic unilateral cleft lip and palate. Children born between 1 April 2005 and 31 March 2007 were seen in cleft centre audit clinics. Consent was obtained for the collection of routine clinical measures (speech recordings, hearing, photographs, models, oral health, psychosocial factors) and anthropometric measures (height, weight, head circumference). The methodology for each clinical measure followed those of the earlier survey as closely as possible. We identified 359 eligible children and recruited 268 (74.7%) to the study. Eleven separate records for each child were collected at the audit clinics. In total, 2666 (90.4%) were collected from a potential 2948 records. The response rates for the self-reported questionnaires, completed at home, were 52.6% for the Health and Lifestyle Questionnaire and 52.2% for the Satisfaction with Service Questionnaire. Response rates and measures were similar to those achieved in the previous survey. There are practical, administrative and methodological challenges in repeating cross-sectional surveys 15 years apart and producing comparable data. © 2015 The Authors. Orthodontics & Craniofacial Research Published by John Wiley & Sons Ltd.

  1. A cross-sectional survey of 5-year-old children with non-syndromic unilateral cleft lip and palate: the Cleft Care UK study. Part 1: background and methodology

    Science.gov (United States)

    Persson, M; Sandy, J R; Waylen, A; Wills, A K; Al-Ghatam, R; Ireland, A J; Hall, A J; Hollingworth, W; Jones, T; Peters, T J; Preston, R; Sell, D; Smallridge, J; Worthington, H; Ness, A R

    2015-01-01

    Structured Abstract Objectives We describe the methodology for a major study investigating the impact of reconfigured cleft care in the United Kingdom (UK) 15 years after an initial survey, detailed in the Clinical Standards Advisory Group (CSAG) report in 1998, had informed government recommendations on centralization. Setting and Sample Population This is a UK multicentre cross-sectional study of 5-year-olds born with non-syndromic unilateral cleft lip and palate. Children born between 1 April 2005 and 31 March 2007 were seen in cleft centre audit clinics. Materials and Methods Consent was obtained for the collection of routine clinical measures (speech recordings, hearing, photographs, models, oral health, psychosocial factors) and anthropometric measures (height, weight, head circumference). The methodology for each clinical measure followed those of the earlier survey as closely as possible. Results We identified 359 eligible children and recruited 268 (74.7%) to the study. Eleven separate records for each child were collected at the audit clinics. In total, 2666 (90.4%) were collected from a potential 2948 records. The response rates for the self-reported questionnaires, completed at home, were 52.6% for the Health and Lifestyle Questionnaire and 52.2% for the Satisfaction with Service Questionnaire. Conclusions Response rates and measures were similar to those achieved in the previous survey. There are practical, administrative and methodological challenges in repeating cross-sectional surveys 15 years apart and producing comparable data. PMID:26567851

  2. How Mathematics Describes Life

    Science.gov (United States)

    Teklu, Abraham

    2017-01-01

    The circle of life is something we have all heard of from somewhere, but we don't usually try to calculate it. For some time we have been working on analyzing a predator-prey model to better understand how mathematics can describe life, in particular the interaction between two different species. The model we are analyzing is called the Holling-Tanner model, and it cannot be solved analytically. The Holling-Tanner model is a very common model in population dynamics because it is a simple descriptor of how predators and prey interact. The model is a system of two differential equations. The model is not specific to any particular set of species and so it can describe predator-prey species ranging from lions and zebras to white blood cells and infections. One thing all these systems have in common are critical points. A critical point is a value for both populations that keeps both populations constant. It is important because at this point the differential equations are equal to zero. For this model there are two critical points, a predator free critical point and a coexistence critical point. Most of the analysis we did is on the coexistence critical point because the predator free critical point is always unstable and frankly less interesting than the coexistence critical point. What we did is consider two regimes for the differential equations, large B and small B. B, A, and C are parameters in the differential equations that control the system where B measures how responsive the predators are to change in the population, A represents predation of the prey, and C represents the satiation point of the prey population. For the large B case we were able to approximate the system of differential equations by a single scalar equation. For the small B case we were able to predict the limit cycle. The limit cycle is a process of the predator and prey populations growing and shrinking periodically. This model has a limit cycle in the regime of small B, that we solved for

  3. FDAAA legislation is working, but methodological flaws undermine the reliability of clinical trials: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Douglas H. Marin dos Santos

    2015-06-01

    Full Text Available The relationship between clinical research and the pharmaceutical industry has placed clinical trials in jeopardy. According to the medical literature, more than 70% of clinical trials are industry-funded. Many of these trials remain unpublished or have methodological flaws that distort their results. In 2007, it was signed into law the Food and Drug Administration Amendments Act (FDAAA, aiming to provide publicly access to a broad range of biomedical information to be made available on the platform ClinicalTrials (available at https://www.clinicaltrials.gov. We accessed ClinicalTrials.gov and evaluated the compliance of researchers and sponsors with the FDAAA. Our sample comprised 243 protocols of clinical trials of biological monoclonal antibodies (mAb adalimumab, bevacizumab, infliximab, rituximab, and trastuzumab. We demonstrate that the new legislation has positively affected transparency patterns in clinical research, through a significant increase in publication and online reporting rates after the enactment of the law. Poorly designed trials, however, remain a challenge to be overcome, due to a high prevalence of methodological flaws. These flaws affect the quality of clinical information available, breaching ethical duties of sponsors and researchers, as well as the human right to health.

  4. FDAAA legislation is working, but methodological flaws undermine the reliability of clinical trials: a cross-sectional study.

    Science.gov (United States)

    Marin Dos Santos, Douglas H; Atallah, Álvaro N

    2015-01-01

    The relationship between clinical research and the pharmaceutical industry has placed clinical trials in jeopardy. According to the medical literature, more than 70% of clinical trials are industry-funded. Many of these trials remain unpublished or have methodological flaws that distort their results. In 2007, it was signed into law the Food and Drug Administration Amendments Act (FDAAA), aiming to provide publicly access to a broad range of biomedical information to be made available on the platform ClinicalTrials (available at https://www.clinicaltrials.gov). We accessed ClinicalTrials.gov and evaluated the compliance of researchers and sponsors with the FDAAA. Our sample comprised 243 protocols of clinical trials of biological monoclonal antibodies (mAb) adalimumab, bevacizumab, infliximab, rituximab, and trastuzumab. We demonstrate that the new legislation has positively affected transparency patterns in clinical research, through a significant increase in publication and online reporting rates after the enactment of the law. Poorly designed trials, however, remain a challenge to be overcome, due to a high prevalence of methodological flaws. These flaws affect the quality of clinical information available, breaching ethical duties of sponsors and researchers, as well as the human right to health.

  5. 76 FR 4866 - Proposed Methodology for Implementation of Section 772(c)(2)(B) of the Tariff Act of 1930, as...

    Science.gov (United States)

    2011-01-27

    ... Georgetown Steel Opinion are Applicable to China's Present-Day Economy,'' dated Mar. 29, 2007 (available at... of Section 772(c)(2)(B) of the Tariff Act of 1930, as Amended, In Certain Non-Market Economy... economy (``NME'') antidumping proceedings by the amount of an export tax, duty, or other charge, pursuant...

  6. Describing treatment effects to patients.

    Science.gov (United States)

    Moxey, Annette; O'Connell, Dianne; McGettigan, Patricia; Henry, David

    2003-11-01

    To examine the impact of different presentations of equivalent information (framing) on treatment decisions faced by patients. A systematic review of the published literature was conducted. English language publications allocating participants to different frames were retrieved using electronic and bibliographic searches. Two reviewers examined each article for inclusion, and assessed methodological quality. Study characteristics were tabulated and where possible, relative risks (RR; 95% confidence intervals) were calculated to estimate intervention effects. Thirty-seven articles, yielding 40 experimental studies, were included. Studies examined treatment (N = 24), immunization (N = 5), or health behavior scenarios (N = 11). Overall, active treatments were preferred when outcomes were described in terms of relative rather than absolute risk reductions or number needed to treat. Surgery was preferred to other treatments when treatment efficacy was presented in a positive frame (survival) rather than a negative frame (mortality) (relative risk [RR] = 1.51, 95% confidence interval [CI], 1.39 to 1.64). Framing effects were less obvious for immunization and health behavior scenarios. Those with little interest in the behavior at baseline were influenced by framing, particularly when information was presented as gains. In studies judged to be of good methodological quality and/or examining actual decisions, the framing effect, although still evident, was less convincing compared to the results of all included studies. Framing effects varied with the type of scenario, responder characteristics, scenario manipulations, and study quality. When describing treatment effects to patients, expressing the information in more than one way may present a balanced view to patients and enable them to make informed decisions.

  7. Urban sprawl, obesity, and cancer mortality in the United States: cross-sectional analysis and methodological challenges.

    Science.gov (United States)

    Berrigan, David; Tatalovich, Zaria; Pickle, Linda W; Ewing, Reid; Ballard-Barbash, Rachel

    2014-01-06

    Urban sprawl has the potential to influence cancer mortality via direct and indirect effects on obesity, access to health services, physical activity, transportation choices and other correlates of sprawl and urbanization. This paper presents a cross-sectional analysis of associations between urban sprawl and cancer mortality in urban and suburban counties of the United States. This ecological analysis was designed to examine whether urban sprawl is associated with total and obesity-related cancer mortality and to what extent these associations differed in different regions of the US. A major focus of our analyses was to adequately account for spatial heterogeneity in mortality. Therefore, we fit a series of regression models, stratified by gender, successively testing for the presence of spatial heterogeneity. Our resulting models included county level variables related to race, smoking, obesity, access to health services, insurance status, socioeconomic position, and broad geographic region as well as a measure of urban sprawl and several interactions. Our most complex models also included random effects to account for any county-level spatial autocorrelation that remained unexplained by these variables. Total cancer mortality rates were higher in less sprawling areas and contrary to our initial hypothesis; this was also true of obesity related cancers in six of seven U.S. regions (census divisions) where there were statistically significant associations between the sprawl index and mortality. We also found significant interactions (p urban sprawl for total and obesity related cancer mortality in both sexes. Thus, the association between urban sprawl and cancer mortality differs in different regions of the US. Despite higher levels of obesity in more sprawling counties in the US, mortality from obesity related cancer was not greater in such counties. Identification of disparities in cancer mortality within and between geographic regions is an ongoing public

  8. The role of pragmatism in explaining heterogeneity in meta-analyses of randomised trials: a protocol for a cross-sectional methodological review

    Science.gov (United States)

    Aves, Theresa; Lawson, Daeria; Nieuwlaat, Robby; Beyene, Joseph; Mbuagbaw, Lawrence

    2017-01-01

    Introduction There has been increasing interest in pragmatic trials methodology. As a result, tools such as the Pragmatic-Explanatory Continuum Indicator Summary-2 (PRECIS-2) are being used prospectively to help researchers design randomised controlled trials (RCTs) within the pragmatic-explanatory continuum. There may be value in applying the PRECIS-2 tool retrospectively in a systematic review setting as it could provide important information about how to pool data based on the degree of pragmatism. Objectives To investigate the role of pragmatism as a source of heterogeneity in systematic reviews by (1) identifying systematic reviews with meta-analyses of RCTs that have moderate to high heterogeneity, (2) applying PRECIS-2 to RCTs of systematic reviews, (3) evaluating the inter-rater reliability of PRECIS-2, (4) determining how much of this heterogeneity may be explained by pragmatism. Methods A cross-sectional methodological review will be conducted on systematic reviews of RCTs published in the Cochrane Library from 1 January 2014 to 1 January 2017. Included systematic reviews will have a minimum of 10 RCTs in the meta-analysis of the primary outcome and moderate to substantial heterogeneity (I2≥50%). Of the eligible systematic reviews, a random selection of 10 will be included for quantitative evaluation. In each systematic review, RCTs will be scored using the PRECIS-2 tool, in duplicate. Agreement between raters will be measured using the intraclass correlation coefficient. Subgroup analyses and meta-regression will be used to evaluate how much variability in the primary outcome may be due to pragmatism. Dissemination This review will be among the first to evaluate the PRECIS-2 tool in a systematic review setting. Results from this research will provide inter-rater reliability information about PRECIS-2 and may be used to provide methodological guidance when dealing with pragmatism in systematic reviews and subgroup considerations. On completion, this

  9. Methodology to carry out a sensitivity and uncertainty analysis for cross sections using a coupled model Trace-Parcs; Metodologia para realizar un analisis de sensibilidad e incertidumbre para las secciones eficaces usando un modelo acoplado TRACE-PARCS

    Energy Technology Data Exchange (ETDEWEB)

    Reyes F, M. C.; Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Col. Lindavista, 07738 Ciudad de Mexico (Mexico); Gomez T, A. M. [ININ, Departamento de Sistemas Nucleares, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Sanchez E, V., E-mail: rf.melisa@gmail.com [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

    2015-09-15

    A methodology was implemented to carry out a sensitivity and uncertainty analysis for cross sections used in a coupled model for Trace/Parcs in a transient of control rod fall of a BWR-5. A model of the reactor core for the neutronic code Parcs was used, in which the assemblies located in the core are described. Thermo-hydraulic model in Trace was a simple model, where only a component type Chan was designed to represent all the core assemblies, which it was within a single vessel and boundary conditions were established. The thermo-hydraulic part was coupled with the neutron part, first for the steady state and then a transient of control rod fall was carried out for the sensitivity and uncertainty analysis. To carry out the analysis of cross sections used in the coupled model Trace/Parcs during the transient, the Probability Density Functions for 22 parameters selected from the total of neutronic parameters that use Parcs were generated, obtaining 100 different cases for the coupled model Trace/Parcs, each one with a database of different cross sections. All these cases were executed with the coupled model, obtaining in consequence 100 different output files for the transient of control rod fall doing emphasis in the nominal power, for which an uncertainty analysis was realized at the same time generate the band of uncertainty. With this analysis is possible to observe the ranges of results of the elected responses varying the selected uncertainty parameters. The sensitivity analysis complements the uncertainty analysis, identifying the parameter or parameters with more influence on the results and thus focuses on these parameters in order to better understand their effects. Beyond the obtained results, because is not a model with real operation data, the importance of this work is to know the application of the methodology to carry out the sensitivity and uncertainty analyses. (Author)

  10. Culturally appropriate methodology in obtaining a representative sample of South Australian Aboriginal adults for a cross-sectional population health study: challenges and resolutions.

    Science.gov (United States)

    Marin, Tania; Taylor, Anne Winifred; Grande, Eleonora Dal; Avery, Jodie; Tucker, Graeme; Morey, Kim

    2015-05-19

    The considerably lower average life expectancy of Aboriginal and Torres Strait Islander Australians, compared with non-Aboriginal and non-Torres Strait Islander Australians, has been widely reported. Prevalence data for chronic disease and health risk factors are needed to provide evidence based estimates for Australian Aboriginal and Torres Strait Islanders population health planning. Representative surveys for these populations are difficult due to complex methodology. The focus of this paper is to describe in detail the methodological challenges and resolutions of a representative South Australian Aboriginal population-based health survey. Using a stratified multi-stage sampling methodology based on the Australian Bureau of Statistics 2006 Census with culturally appropriate and epidemiological rigorous methods, 11,428 randomly selected dwellings were approached from a total of 209 census collection districts. All persons eligible for the survey identified as Aboriginal and/or Torres Strait Islander and were selected from dwellings identified as having one or more Aboriginal person(s) living there at the time of the survey. Overall, the 399 interviews from an eligible sample of 691 SA Aboriginal adults yielded a response rate of 57.7%. These face-to-face interviews were conducted by ten interviewers retained from a total of 27 trained Aboriginal interviewers. Challenges were found in three main areas: identification and recruitment of participants; interviewer recruitment and retainment; and using appropriate engagement with communities. These challenges were resolved, or at least mainly overcome, by following local protocols with communities and their representatives, and reaching agreement on the process of research for Aboriginal people. Obtaining a representative sample of Aboriginal participants in a culturally appropriate way was methodologically challenging and required high levels of commitment and resources. Adhering to these principles has resulted in a

  11. A cross-sectional study with an improved methodology to assess occupational air pollution exposure and respiratory health in motorcycle taxi driving

    International Nuclear Information System (INIS)

    Lawin, Herve; Agodokpessi, Gildas; Ayelo, Paul; Kagima, Jacqueline; Sonoukon, Rodrigue; Mbatchou Ngahane, Bertrand H.; Awopeju, Olayemi; Vollmer, William M.; Nemery, Benoit; Burney, Peter; Fayomi, Benjamin

    2016-01-01

    Introduction: Motorcycle taxi driving is common in many African cities. This study tested whether this occupation is associated with more respiratory disorders in a context of widespread urban air pollution with an improved methodology. Methods: In a cross sectional study we compared 85 male motorcycle taxi drivers in the capital city of the Republic of Benin (Cotonou) with an age and neighborhood matched control group. All participants carried a portable carbon monoxide data logger for 8 hours per day to assess exposure to air pollution. Respiratory symptoms were obtained using a standardized questionnaire and pulmonary function was assessed by spirometry. Results: The two groups did not differ significantly (p > 0.10) in their age, height, educational level, and exposures to smoke from biomass fuels and tobacco products. The taxi drivers were exposed to higher mean (SD) levels of carbon monoxide (7.6 ± 4.9 ppmvs. 5.4 ± 3.8 ppm p = 0.001). They reported more phlegm and tended to have slightly lower levels of lung function, although these differences were not statistically significant. Conclusion: In this cross sectional study of young motorcycle taxi drivers with substantial exposure to urban traffic and a matched control group, we found no evidence for respiratory impairment. A follow-up of such study population with other pollution exposure surrogate and other clinical endpoint may provide a more robust conclusion regarding the exposure response in this professional group. - Highlights: • Need of improved study method to assess air pollution effect in exposed workers • This study compared motorcycle taxi drivers and a matched control group • Personal carbon monoxide exposure and respiratory disorders were collected • No evidence of more respiratory disorders even though pollutant exposure was higher

  12. A cross-sectional study with an improved methodology to assess occupational air pollution exposure and respiratory health in motorcycle taxi driving

    Energy Technology Data Exchange (ETDEWEB)

    Lawin, Herve, E-mail: hervelawin@yahoo.fr [Unit of Teaching and Research in Occupational and Environmental Health, Department of Public Health, Faculty of Health Sciences, University of Abomey-Calavi (Benin); Agodokpessi, Gildas [Centre National Hospitalier et Universitaire de Pneumo-Phtisiologie, Cotonou (Benin); Ayelo, Paul [Unit of Teaching and Research in Occupational and Environmental Health, Department of Public Health, Faculty of Health Sciences, University of Abomey-Calavi (Benin); Kagima, Jacqueline [Department of internal medicine, Egerton University (Kenya); Sonoukon, Rodrigue [Unit of Teaching and Research in Occupational and Environmental Health, Department of Public Health, Faculty of Health Sciences, University of Abomey-Calavi (Benin); Mbatchou Ngahane, Bertrand H. [Department of Internal Medicine, Douala General Hospital, Cameroon Faculty of Medicine and Pharmaceutical Sciences, University of Douala, Douala (Cameroon); Awopeju, Olayemi [Department of Medicine, Obafemi Awolowo University, Ile Ife (Nigeria); Vollmer, William M. [Center for Health Research, Kaiser Permanente Northwest, Portland (United States); Nemery, Benoit [Dept. of Public Health, Occupational and Environmental Insurance Medicine, KU Leuven, Leuven (Belgium); Burney, Peter [National Heart & Lung Institute, Imperial College, London (United Kingdom); Fayomi, Benjamin [Unit of Teaching and Research in Occupational and Environmental Health, Department of Public Health, Faculty of Health Sciences, University of Abomey-Calavi (Benin)

    2016-04-15

    Introduction: Motorcycle taxi driving is common in many African cities. This study tested whether this occupation is associated with more respiratory disorders in a context of widespread urban air pollution with an improved methodology. Methods: In a cross sectional study we compared 85 male motorcycle taxi drivers in the capital city of the Republic of Benin (Cotonou) with an age and neighborhood matched control group. All participants carried a portable carbon monoxide data logger for 8 hours per day to assess exposure to air pollution. Respiratory symptoms were obtained using a standardized questionnaire and pulmonary function was assessed by spirometry. Results: The two groups did not differ significantly (p > 0.10) in their age, height, educational level, and exposures to smoke from biomass fuels and tobacco products. The taxi drivers were exposed to higher mean (SD) levels of carbon monoxide (7.6 ± 4.9 ppmvs. 5.4 ± 3.8 ppm p = 0.001). They reported more phlegm and tended to have slightly lower levels of lung function, although these differences were not statistically significant. Conclusion: In this cross sectional study of young motorcycle taxi drivers with substantial exposure to urban traffic and a matched control group, we found no evidence for respiratory impairment. A follow-up of such study population with other pollution exposure surrogate and other clinical endpoint may provide a more robust conclusion regarding the exposure response in this professional group. - Highlights: • Need of improved study method to assess air pollution effect in exposed workers • This study compared motorcycle taxi drivers and a matched control group • Personal carbon monoxide exposure and respiratory disorders were collected • No evidence of more respiratory disorders even though pollutant exposure was higher.

  13. Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

    Directory of Open Access Journals (Sweden)

    Simms Victoria

    2007-03-01

    Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

  14. Methodology applied to develop the DHIE: applied methodology

    CSIR Research Space (South Africa)

    Herselman, Marlien

    2016-12-01

    Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

  15. Disposal Criticality Analysis Methodology Topical Report

    International Nuclear Information System (INIS)

    Horton, D.G.

    1998-01-01

    The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), a ny processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

  16. Disposal Criticality Analysis Methodology Topical Report

    International Nuclear Information System (INIS)

    D.G. Horton

    1998-01-01

    The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), any processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

  17. Five Describing Factors of Dyslexia

    Science.gov (United States)

    Tamboer, Peter; Vorst, Harrie C. M.; Oort, Frans J.

    2016-01-01

    Two subtypes of dyslexia (phonological, visual) have been under debate in various studies. However, the number of symptoms of dyslexia described in the literature exceeds the number of subtypes, and underlying relations remain unclear. We investigated underlying cognitive features of dyslexia with exploratory and confirmatory factor analyses. A…

  18. Procedure to describe clavicular motion.

    Science.gov (United States)

    Gutierrez Delgado, Guivey; De Beule, Matthieu; Ortega Cardentey, Dolgis R; Segers, Patrick; Iznaga Benítez, Arsenio M; Rodríguez Moliner, Tania; Verhegghe, Benedict; Palmans, Tanneke; Van Hoof, Tom; Van Tongel, Alexander

    2017-03-01

    For many years, researchers have attempted to describe shoulder motions by using different mathematical methods. The aim of this study was to describe a procedure to quantify clavicular motion. The procedure proposed for the kinematic analysis consists of 4 main processes: 3 transcortical pins in the clavicle, motion capture, obtaining 3-dimensional bone models, and data processing. Clavicular motion by abduction (30° to 150°) and flexion (55° to 165°) were characterized by an increment of retraction of 27° to 33°, elevation of 25° to 28°, and posterior rotation of 14° to 15°, respectively. In circumduction, clavicular movement described an ellipse, which was reflected by retraction and elevation. Kinematic analysis shows that the articular surfaces move by simultaneously rolling and sliding on the convex surface of the sternum for the 3 movements of abduction, flexion, and circumduction. The use of 3 body landmarks in the clavicle and the direct measurement of bone allowed description of the osteokinematic and arthrokinematic movement of the clavicle. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  19. How often do German children and adolescents show signs of common mental health problems? Results from different methodological approaches – a cross-sectional study

    OpenAIRE

    Sauer, Kristin; Barkmann, Claus; Klasen, Fionna; Bullinger, Monika; Glaeske, Gerd; Ravens-Sieberer, Ulrike

    2014-01-01

    Background Child and adolescent mental health problems are ubiquitous and burdensome. Their impact on functional disability, the high rates of accompanying medical illnesses and the potential to last until adulthood make them a major public health issue. While methodological factors cause variability of the results from epidemiological studies, there is a lack of prevalence rates of mental health problems in children and adolescents according to ICD-10 criteria from nationally representative ...

  20. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear-reactor-safety research program is described and compared with other methodologies established for performing uncertainty analyses

  1. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear reactor safety research program is described and compared with other methodologies established for performing uncertainty analyses

  2. Application of an iterative methodology for cross-section and variance/covariance data adjustment to the analysis of fast spectrum systems accounting for non-linearity

    International Nuclear Information System (INIS)

    Pelloni, Sandro

    2014-01-01

    Highlights: • Our data adjustment is based on a Generalized Linear Least-Squares approach. • The computed sensitivity coefficients are converged within an iterative procedure. • The corresponding multistep adjustment thus accounts for non-linearity. • It provides a more accurate simulation of fast-spectrum experiments. - Abstract: The data assimilation benchmark launched by the “Subgroup 33” on “Methods and issues for the combined use of integral experiments and covariance data” of the Working Party on Evaluation Cooperation (WPEC) of the OECD Nuclear Energy Agency Nuclear Science Committee is recalculated by means of a multistep adjustment procedure using the deterministic code system ERANOS in conjunction with a dedicated Generalized Linear Least-Squares approach based on the Bayesian parameter estimation method. Nuclear data in terms of multi-group cross-sections as well as their variances and covariances, are adjusted for 11 nuclides, namely 10 B, 16 O, 23 Na, 56 Fe, 52 Cr, 58 Ni, 235 U, 238 U, 239 Pu, 240 Pu and 241 Pu and 6 nuclear reactions which are elastic and inelastic scattering, lumped (n,2n) and (n,3n), capture, fission and ν ¯ . The adjustment is carried out by making use of experimental data for 19 integral parameters obtained in 7 different fast spectrum systems. In the determination of a posteriori values for these integral parameters including effective multiplication factors, spectral indices and void effects, along with their nuclear data uncertainty, the required adjusted data for these nuclides and reactions are generated in conjunction with pre-computed sensitivity coefficients of the analytical integral parameters to the nuclear data to adjust. The suggested multistep scheme aims at accounting for non-linear effects. Correspondingly, the sensitivity coefficients are recalculated within an iterative procedure on the basis of the a posteriori analytical values and adjusted cross-sections. The adjustment is thus repeated

  3. Evaluation of used methodology/methods in Aespoe HRL. Sections 0/700-1/475 and 1/475-2/265

    International Nuclear Information System (INIS)

    Andersson, Kjell; Sundquist, U.; Torssander, P.

    1997-01-01

    Some of the main objectives with the Aespoe Hard Rock Laboratory is reviewing and verifying the suitability of different investigations methods regarding bedrock characterization, test methods for detailed site investigations and to evaluate factors of importance for safety in realistic conditions. The SKB evaluation will result in a strategy planned to be used in the forthcoming site selection of a repository for high level radioactive waste. This report presents an evaluation of the methods used by SKB in the prediction of the bedrock prior to excavation. The prediction was based on the pre investigations carried out during 1986-1990. The review has followed the SKB classification of issue areas: geological/structural model, groundwater flow, groundwater chemistry, transport of solutes and mechanical stability. The review concerns SKB's objectives with the prediction and the different criteria for selection of variables - considering the demands of the performance assessment. This report includes evaluation of two tunnel sections, 0/700 - 1/475 and 1/475 - 2/265, comprising used data, prediction methods and prediction accuracy. By way of comparing predictions before excavation and outcome in the tunnel, a strict validation was performed. Based on the results from the validation, the applicability of different methods was estimated and the predictability of different subjects was assessed. It should be emphasised that the Aespoe predictions have not been directly intended for performance assessment purposes. However, it is of interest to see how the predictions relate to the information needs of performance assessment. By this it is possible to identify areas where more work needs to be done in the future, either in the operational phases at Aespoe or in other parts of the SKB program, thereby setting the predictions in an overall perspective from the point of view of performance assessment

  4. An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan.

    Science.gov (United States)

    Prudhon, Claudine; de Radiguès, Xavier; Dale, Nancy; Checchi, Francesco

    2011-11-09

    Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93) and 0.675 (0.23-0.86) for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

  5. Analytical methodology for nuclear safeguards

    International Nuclear Information System (INIS)

    Ramakumar, K.L.

    2011-01-01

    This paper attempts to briefly describe the analytical methodologies available and also highlight some of the challenges, expectations from nuclear material accounting and control (NUMAC) point of view

  6. An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan

    Directory of Open Access Journals (Sweden)

    Prudhon Claudine

    2011-11-01

    Full Text Available Abstract Background Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. Methods We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. Results The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93 and 0.675 (0.23-0.86 for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Conclusion Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

  7. Safety class methodology

    International Nuclear Information System (INIS)

    Donner, E.B.; Low, J.M.; Lux, C.R.

    1992-01-01

    DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

  8. Methodology for calculating the thickness free of sigma phase in duplex stainless steels large section parts during hiperquenching; Metodologia para el calculo de espesores limite libres de fase sigma durante el hipertemple en piezas de aceros duplex de gran seccion

    Energy Technology Data Exchange (ETDEWEB)

    Jimbert, P.; Guraya, T.; Torregary, A.; Bravo, P.

    2013-06-01

    To achieve the mechanical properties and corrosion resistance desired by duplex stainless steels used by the petrochemical and nuclear industry, parts are subjected to a hiperquenching heat treatment from about 1050 degree centigrade. This avoids the risk of intermetallic precipitation which drastically reduces the properties of these materials. However with increasing depth to which the deposits are present, the thicknesses for such pipes have been increased, resulting in higher levels of demand on all its manufacturing process, including the heat treatment. To avoid the precipitation of intermetallic phases such as sigma phase it is necessary to know the cooling profile in the center of the work piece and for this purpose to know the value of the Surface Heat Transfer Coefficient (h) is essential. This coefficient changes during the hiperquenching and its value is determined experimentally as it depends on several process parameters. Studies reveal that its value is stabilized within a few seconds. We can then assume that to know the cooling profile in the center of large sections it is only necessary to know the stabilized value of h. However, all the studies found in the literature are referred to diameters smaller than 100 mm. This paper has developed a methodology to predict the precipitation of intermetallic phases in duplex stainless steel parts with large thicknesses in industrial facilities from the calculation of h. This methodology allows us to calculate the cooling profiles without wasting any work piece using one or more sensorized patterns with thermocouples and a subsequent simulation with ANSYS. (Author)

  9. Archetype modeling methodology.

    Science.gov (United States)

    Moner, David; Maldonado, José Alberto; Robles, Montserrat

    2018-03-01

    Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

  10. BUGJEFF311.BOLIB (JEFF-3.1.1) and BUGENDF70.BOLIB (ENDF/B-VII.0) - Generation Methodology and Preliminary Testing of two ENEA-Bologna Group Cross Section Libraries for LWR Shielding and Pressure Vessel Dosimetry

    Science.gov (United States)

    Pescarini, Massimo; Sinitsa, Valentin; Orsi, Roberto; Frisoni, Manuela

    2016-02-01

    Two broad-group coupled neutron/photon working cross section libraries in FIDO-ANISN format, dedicated to LWR shielding and pressure vessel dosimetry applications, were generated following the methodology recommended by the US ANSI/ANS-6.1.2-1999 (R2009) standard. These libraries, named BUGJEFF311.BOLIB and BUGENDF70.BOLIB, are respectively based on JEFF-3.1.1 and ENDF/B-VII.0 nuclear data and adopt the same broad-group energy structure (47 n + 20 γ) of the ORNL BUGLE-96 similar library. They were respectively obtained from the ENEA-Bologna VITJEFF311.BOLIB and VITENDF70.BOLIB libraries in AMPX format for nuclear fission applications through problem-dependent cross section collapsing with the ENEA-Bologna 2007 revision of the ORNL SCAMPI nuclear data processing system. Both previous libraries are based on the Bondarenko self-shielding factor method and have the same AMPX format and fine-group energy structure (199 n + 42 γ) as the ORNL VITAMIN-B6 similar library from which BUGLE-96 was obtained at ORNL. A synthesis of a preliminary validation of the cited BUGLE-type libraries, performed through 3D fixed source transport calculations with the ORNL TORT-3.2 SN code, is included. The calculations were dedicated to the PCA-Replica 12/13 and VENUS-3 engineering neutron shielding benchmark experiments, specifically conceived to test the accuracy of nuclear data and transport codes in LWR shielding and radiation damage analyses.

  11. Comparing the Use of Books with Enhanced Records versus Those Without Enhancements: Methodology Leads to Questionable Conclusions. A review of: Madarash‐Hill, Cherie and J.B. Hill. “Electronically Enriched Enhancements in Catalog Records: A Use Study of Books Described on Records With URL Enhancements Versus Those Without.” Technical Services Quarterly 23.2 (2005: 19‐31.

    Directory of Open Access Journals (Sweden)

    Susan Haigh

    2007-06-01

    Full Text Available Objective – To compare the use of books described by catalogue records that are enhanced with URL links to such information as dust jackets, tables of contents, sample text, and publishers’ descriptions, with the use of books described by records that are not enhanced with such links.Design – Use study.Setting – Academic library (Southeastern Louisiana University, Sims Memorial Library.Subjects – 180 records with enhancements and 180 records (different titles without enhancements.Methods – The study identified the sample of unenhanced records by conducting searches of the broad subject terms “History”, “United States”, “Education”,and “Social” and limiting the searches to books. The enhanced sample was derived in the same manner, but with additional search limiters to identify only those records that had URL enhancements. An equal sample of enhanced and unenhanced records (50 or 30 of each was tracked for each of four search terms. Only records for books that could be checked out were included, as use statistics were based on whether or not a book was borrowed. While half of the enhanced records had full‐text elements (such as descriptions that were indexed and thus searchable, the rate of use for these records was not tracked separately from the enhanced records that only had URL enhancements.Main results – Books described on records with URL enhancements for publisher descriptions, tables of contents, book reviews, or sample text had higher use than those without URL enhancements. Only 7% of titles with URLs, compared with 21% of those without, had not been borrowed. 74.67% of titles with URLs had been checked out one or two times, compared with 69.5% of those without URLs. The number of titles with enhanced records that had 3 or more checkouts was almost double the rate of unenhanced titles (18% to 9.5%.Conclusion – The authors conclude that catalogue records that have electronic links to book reviews, cover

  12. Environmental impact statement analysis: dose methodology

    International Nuclear Information System (INIS)

    Mueller, M.A.; Strenge, D.L.; Napier, B.A.

    1981-01-01

    Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

  13. On methodology

    DEFF Research Database (Denmark)

    Cheesman, Robin; Faraone, Roque

    2002-01-01

    This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública".......This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública"....

  14. Seismic hazard analysis. A methodology for the Eastern United States

    Energy Technology Data Exchange (ETDEWEB)

    Bernreuter, D L

    1980-08-01

    This report presents a probabilistic approach for estimating the seismic hazard in the Central and Eastern United States. The probabilistic model (Uniform Hazard Methodology) systematically incorporates the subjective opinion of several experts in the evaluation of seismic hazard. Subjective input, assumptions and associated hazard are kept separate for each expert so as to allow review and preserve diversity of opinion. The report is organized into five sections: Introduction, Methodology Comparison, Subjective Input, Uniform Hazard Methodology (UHM), and Uniform Hazard Spectrum. Section 2 Methodology Comparison, briefly describes the present approach and compares it with other available procedures. The remainder of the report focuses on the UHM. Specifically, Section 3 describes the elicitation of subjective input; Section 4 gives details of various mathematical models (earthquake source geometry, magnitude distribution, attenuation relationship) and how these models re combined to calculate seismic hazard. The lost section, Uniform Hazard Spectrum, highlights the main features of typical results. Specific results and sensitivity analyses are not presented in this report. (author)

  15. Nanotoxicology materials, methodologies, and assessments

    CERN Document Server

    Durán, Nelson; Alves, Oswaldo L; Zucolotto, Valtencir

    2014-01-01

    This book begins with a detailed introduction to engineered nanostructures, followed by a section on methodologies used in research on cytotoxicity and genotoxicity, and concluding with evidence for the cyto- and genotoxicity of specific nanoparticles.

  16. Proposta metodológica para avaliação de controlador automático de seções e pulverização Proposed methodology for evaluation of automatic controller of boom sections and spray

    Directory of Open Access Journals (Sweden)

    Étore F Reynaldo

    2011-02-01

    Full Text Available Na aplicação de produtos fitossanitários, a utilização de equipamentos que controlam automaticamente as seções da barra e a pulverização já é realidade; entretanto, ainda não há resultados que demonstrem a sua eficácia. Por esse motivo, este trabalho teve por finalidade desenvolver uma metodologia para a avaliação de um equipamento que controla automaticamente as seções e a pulverização. Avaliou-se um controlador automático de seções e pulverização de mercado, e, para tanto, foram utilizados três níveis de acurácia do sinal de GPS (algoritmo interno, SBAS e RTK, três ângulos para a simulação de entrada e saída da barra de pulverização em relação à borda do talhão (0; 45 e 60º e três velocidades de trabalho (1,66; 5,00 e 8,33 m s-1. A metodologia proposta possibilitou a determinação dos tempos e distâncias de abertura e fechamento das seções. Os coeficientes de variação para os tempos e distâncias de abertura e fechamento das seções indicaram uma variação considerável. Houve interações significativas em função do tipo de sinal de GPS. A configuração recomendada pelo fabricante e adotada para a avaliação do controlador automático de seções e pulverização não atende a todas as situações simuladas.In the application of pesticides, the use of equipment that automatically controls the sections of the boom and the spray is already reality. However, there are no results to show its effectiveness. Therefore, this work was to develop a methodology for the evaluation of equipments which automatically controls the boom sections and the spraying pattern. A commercial automatic controller of boom spraying sections was evaluated using three levels of GPS accuracy (internal algorithm, SBAS and RTK, three angles for the simulation of entry and exit of the spray bar on field edges (0, 45 and 60 º and three forward speeds (1.66, 5.00 and 8.33 m s-1. The proposed methodology allowed the

  17. Methodological guidelines

    International Nuclear Information System (INIS)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-01-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs

  18. Methodological guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-04-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs.

  19. Creativity in phenomenological methodology

    DEFF Research Database (Denmark)

    Dreyer, Pia; Martinsen, Bente; Norlyk, Annelise

    2014-01-01

    on the methodologies of van Manen, Dahlberg, Lindseth & Norberg, the aim of this paper is to argue that the increased focus on creativity and arts in research methodology is valuable to gain a deeper insight into lived experiences. We illustrate this point through examples from empirical nursing studies, and discuss......Nursing research is often concerned with lived experiences in human life using phenomenological and hermeneutic approaches. These empirical studies may use different creative expressions and art-forms to describe and enhance an embodied and personalised understanding of lived experiences. Drawing...... may support a respectful renewal of phenomenological research traditions in nursing research....

  20. A Semantic Web-Based Methodology for Describing Scientific Research Efforts

    Science.gov (United States)

    Gandara, Aida

    2013-01-01

    Scientists produce research resources that are useful to future research and innovative efforts. In a typical scientific scenario, the results created by a collaborative team often include numerous artifacts, observations and relationships relevant to research findings, such as programs that generate data, parameters that impact outputs, workflows…

  1. Phenomenological approach to describe logistic growth and ...

    Indian Academy of Sciences (India)

    2016-10-18

    Oct 18, 2016 ... Gompertz function, used to describe biological growth processes undergoing atrophy or a demographic and ... recognizing the characteristic feature of a system and .... demonstrated with the help of a thought experiment by.

  2. describing a collaborative clothing design process between

    African Journals Online (AJOL)

    user

    ISSN 0378-5254 Journal of Family Ecology and Consumer Sciences, Vol 43, 2015. Designing success: describing a ... PROCESS BETWEEN APPRENTICE DESIGNERS AND EXPERT DESIGN .... 5 Evaluation and decisions. (a) Outcomes.

  3. MIRD methodology

    International Nuclear Information System (INIS)

    Rojo, Ana M.; Gomez Parada, Ines

    2004-01-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained

  4. PSA methodology

    Energy Technology Data Exchange (ETDEWEB)

    Magne, L

    1997-12-31

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300{sup 1} and EPS 900{sup 2} PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs.

  5. PSA methodology

    International Nuclear Information System (INIS)

    Magne, L.

    1996-01-01

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300 1 and EPS 900 2 PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs

  6. Spent fuel management fee methodology and computer code user's manual

    International Nuclear Information System (INIS)

    Engel, R.L.; White, M.K.

    1982-01-01

    The methodology and computer model described here were developed to analyze the cash flows for the federal government taking title to and managing spent nuclear fuel. The methodology has been used by the US Department of Energy (DOE) to estimate the spent fuel disposal fee that will provide full cost recovery. Although the methodology was designed to analyze interim storage followed by spent fuel disposal, it could be used to calculate a fee for reprocessing spent fuel and disposing of the waste. The methodology consists of two phases. The first phase estimates government expenditures for spent fuel management. The second phase determines the fees that will result in revenues such that the government attains full cost recovery assuming various revenue collection philosophies. These two phases are discussed in detail in subsequent sections of this report. Each of the two phases constitute a computer module, called SPADE (SPent fuel Analysis and Disposal Economics) and FEAN (FEe ANalysis), respectively

  7. Regional Shelter Analysis Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dennison, Deborah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Miller, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-08-01

    The fallout from a nuclear explosion has the potential to injure or kill 100,000 or more people through exposure to external gamma (fallout) radiation. Existing buildings can reduce radiation exposure by placing material between fallout particles and exposed people. Lawrence Livermore National Laboratory was tasked with developing an operationally feasible methodology that could improve fallout casualty estimates. The methodology, called a Regional Shelter Analysis, combines the fallout protection that existing buildings provide civilian populations with the distribution of people in various locations. The Regional Shelter Analysis method allows the consideration of (a) multiple building types and locations within buildings, (b) country specific estimates, (c) population posture (e.g., unwarned vs. minimally warned), and (d) the time of day (e.g., night vs. day). The protection estimates can be combined with fallout predictions (or measurements) to (a) provide a more accurate assessment of exposure and injury and (b) evaluate the effectiveness of various casualty mitigation strategies. This report describes the Regional Shelter Analysis methodology, highlights key operational aspects (including demonstrating that the methodology is compatible with current tools), illustrates how to implement the methodology, and provides suggestions for future work.

  8. Methodological Issues and Practices in Qualitative Research.

    Science.gov (United States)

    Bradley, Jana

    1993-01-01

    Discusses methodological issues concerning qualitative research and describes research practices that qualitative researchers use to address these methodological issues. Topics discussed include the researcher as interpreter, the emergent nature of qualitative research, understanding the experience of others, trustworthiness in qualitative…

  9. Sensorimotor Interference When Reasoning About Described Environments

    Science.gov (United States)

    Avraamides, Marios N.; Kyranidou, Melina-Nicole

    The influence of sensorimotor interference was examined in two experiments that compared pointing with iconic arrows and verbal responding in a task that entailed locating target-objects from imagined perspectives. Participants studied text narratives describing objects at locations around them in a remote environment and then responded to targets from memory. Results revealed only minor differences between the two response modes suggesting that bodily cues do not exert severe detrimental interference on spatial reasoning from imagined perspective when non-immediate described environments are used. The implications of the findings are discussed.

  10. Transmission pricing: paradigms and methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Shirmohammadi, Dariush [Pacific Gas and Electric Co., San Francisco, CA (United States); Vieira Filho, Xisto; Gorenstin, Boris [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Pereira, Mario V.P. [Power System Research, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    In this paper we describe the principles of several paradigms and methodologies for pricing transmission services. The paper outlines some of the main characteristics of these paradigms and methodologies such as where they may be used for best results. Due to their popularity, power flow based MW-mile and short run marginal cost pricing methodologies will be covered in some detail. We conclude the paper with examples of the application of these two pricing methodologies for pricing transmission services in Brazil. (author) 25 refs., 2 tabs.

  11. Stochastic GARCH dynamics describing correlations between stocks

    Science.gov (United States)

    Prat-Ortega, G.; Savel'ev, S. E.

    2014-09-01

    The ARCH and GARCH processes have been successfully used for modelling price dynamics such as stock returns or foreign exchange rates. Analysing the long range correlations between stocks, we propose a model, based on the GARCH process, which is able to describe the main characteristics of the stock price correlations, including the mean, variance, probability density distribution and the noise spectrum.

  12. How Digital Native Learners Describe Themselves

    Science.gov (United States)

    Thompson, Penny

    2015-01-01

    Eight university students from the "digital native" generation were interviewed about the connections they saw between technology use and learning, and also their reactions to the popular press claims about their generation. Themes that emerged from the interviews were coded to show patterns in how digital natives describe themselves.…

  13. Analytical Solutions To Describe Juxtaposed Sands | Adeniji ...

    African Journals Online (AJOL)

    Mathematical (linear diffusion) equations are presented for two pseudoreservoir regions intersected by fault that describe the effects of partial communicating fault on pressure transient behaviour for each fault block. Green's and source function technique solve these equations. A two-well system is considered for the ...

  14. Using fundamental equations to describe basic phenomena

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.

    1999-01-01

    When the fundamental thermodynamic balance equations (mass, energy, and momentum) are used to describe the processes in a simple refrigeration system, then one finds that the resulting equation system will have a degree of freedom equal to one. Further investigations reveal that it is the equatio...

  15. Did goethe describe attention deficit hyperactivity disorder?

    Science.gov (United States)

    Bonazza, Sara; Scaglione, Cesa; Poppi, Massimo; Rizzo, Giovanni

    2011-01-01

    As early as 1846, the typical symptoms of attention deficit hyperactivity disorder (ADHD) were described by Heinrich Hoffmann (1809-1894). However, in Goethe's masterpiece Faust (1832), the character of Euphorion strongly suggests ADHD diagnosis. Copyright © 2011 S. Karger AG, Basel.

  16. Using the EPRI Risk-Informed ISI Methodology on Piping Systems in Forsmark 3

    Energy Technology Data Exchange (ETDEWEB)

    O' Regan, Patrick (Electric Power Research Inst., Knoxville, TN (United States)); Moody, Jim (JHM Consulting, Strafford (United States)); Loetman, Jan (Forsmarks Kraftgrupp AB (Sweden)); Sandstedt, Johan (Risk Pilot AB, Stockholm (Sweden))

    2010-12-15

    The objective of this project was a pilot plant demonstration of the EPRI RI-ISI Methodology to selected systems at Forsmark, Unit 3 (F3). This scope of this study encompasses five systems and is based upon F3 implementation of SKIFs guidance as well as other consideration as documented in the PMT program. As described in section 2, five systems were selected for evaluation. These systems were selected because they allow this project to focus on a number of issues of interest in developing a RI-ISI methodology and RI-ISI program. This includes the following: - Several different types of degradation may be identified, - Several different types of 'consequence of failure' may be identified, - Different types of safety systems are evaluated - Non-safety systems are evaluated Using the results of this application, insights and comparisons between SKIFS and the EPRI methodologies' are provided including the following: - Consequence of pressure boundary failure (PBF) as described in Section 3.14. - Degradation mechanism evaluation as described in Section 4.8. - Risk ranking as described in Section 5. - Element selection for inspection as described in Section 6. - Risk impact as described in Section 7

  17. Using the EPRI Risk-Informed ISI Methodology on Piping Systems in Forsmark 3

    International Nuclear Information System (INIS)

    O'Regan, Patrick; Moody, Jim; Loetman, Jan; Sandstedt, Johan

    2010-12-01

    The objective of this project was a pilot plant demonstration of the EPRI RI-ISI Methodology to selected systems at Forsmark, Unit 3 (F3). This scope of this study encompasses five systems and is based upon F3 implementation of SKIFs guidance as well as other consideration as documented in the PMT program. As described in section 2, five systems were selected for evaluation. These systems were selected because they allow this project to focus on a number of issues of interest in developing a RI-ISI methodology and RI-ISI program. This includes the following: - Several different types of degradation may be identified, - Several different types of 'consequence of failure' may be identified, - Different types of safety systems are evaluated - Non-safety systems are evaluated Using the results of this application, insights and comparisons between SKIFS and the EPRI methodologies' are provided including the following: - Consequence of pressure boundary failure (PBF) as described in Section 3.14. - Degradation mechanism evaluation as described in Section 4.8. - Risk ranking as described in Section 5. - Element selection for inspection as described in Section 6. - Risk impact as described in Section 7

  18. Generating and Describing Affective Eye Behaviors

    Science.gov (United States)

    Mao, Xia; Li, Zheng

    The manner of a person's eye movement conveys much about nonverbal information and emotional intent beyond speech. This paper describes work on expressing emotion through eye behaviors in virtual agents based on the parameters selected from the AU-Coded facial expression database and real-time eye movement data (pupil size, blink rate and saccade). A rule-based approach to generate primary (joyful, sad, angry, afraid, disgusted and surprise) and intermediate emotions (emotions that can be represented as the mixture of two primary emotions) utilized the MPEG4 FAPs (facial animation parameters) is introduced. Meanwhile, based on our research, a scripting tool, named EEMML (Emotional Eye Movement Markup Language) that enables authors to describe and generate emotional eye movement of virtual agents, is proposed.

  19. How do consumers describe wine astringency?

    Science.gov (United States)

    Vidal, Leticia; Giménez, Ana; Medina, Karina; Boido, Eduardo; Ares, Gastón

    2015-12-01

    Astringency is one of the most important sensory characteristics of red wine. Although a hierarchically structured vocabulary to describe the mouthfeel sensations of red wine has been proposed, research on consumers' astringency vocabulary is lacking. In this context, the aim of this work was to gain an insight on the vocabulary used by wine consumers to describe the astringency of red wine and to evaluate the influence of wine involvement on consumers' vocabulary. One hundred and twenty-five wine consumers completed and on-line survey with five tasks: an open-ended question about the definition of wine astringency, free listing the sensations perceived when drinking an astringent wine, free listing the words they would use to describe the astringency of a red wine, a CATA question with 44 terms used in the literature to describe astringency, and a wine involvement questionnaire. When thinking about wine astringency consumers freely elicited terms included in the Mouth-feel Wheel, such as dryness and harsh. The majority of the specific sub-qualities of the Mouth-feel Wheel were not included in consumer responses. Also, terms not classified as astringency descriptors were elicited (e.g. acid and bitter). Only 17 out of the 31 terms from the Mouth-feel Wheel were used by more than 10% of participants when answering the CATA question. There were no large differences in the responses of consumer segments with different wine involvement. Results from the present work suggest that most of the terms of the Mouth-feel Wheel might not be adequate to communicate the astringency characteristics of red wine to consumers. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Supplement to the Disposal Criticality Analysis Methodology

    International Nuclear Information System (INIS)

    Thomas, D.A.

    1999-01-01

    The methodology for evaluating criticality potential for high-level radioactive waste and spent nuclear fuel after the repository is sealed and permanently closed is described in the Disposal Criticality Analysis Methodology Topical Report (DOE 1998b). The topical report provides a process for validating various models that are contained in the methodology and states that validation will be performed to support License Application. The Supplement to the Disposal Criticality Analysis Methodology provides a summary of data and analyses that will be used for validating these models and will be included in the model validation reports. The supplement also summarizes the process that will be followed in developing the model validation reports. These reports will satisfy commitments made in the topical report, and thus support the use of the methodology for Site Recommendation and License Application. It is concluded that this report meets the objective of presenting additional information along with references that support the methodology presented in the topical report and can be used both in validation reports and in answering request for additional information received from the Nuclear Regulatory Commission concerning the topical report. The data and analyses summarized in this report and presented in the references are not sufficient to complete a validation report. However, this information will provide a basis for several of the validation reports. Data from several references in this report have been identified with TBV-1349. Release of the TBV governing this data is required prior to its use in quality affecting activities and for use in analyses affecting procurement, construction, or fabrication. Subsequent to the initiation of TBV-1349, DOE issued a concurrence letter (Mellington 1999) approving the request to identify information taken from the references specified in Section 1.4 as accepted data

  1. 42 CFR 441.472 - Budget methodology.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Budget methodology. 441.472 Section 441.472 Public... Self-Directed Personal Assistance Services Program § 441.472 Budget methodology. (a) The State shall set forth a budget methodology that ensures service authorization resides with the State and meets the...

  2. Testing methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs.

  3. Testing methodologies

    International Nuclear Information System (INIS)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical ''signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs

  4. A functional language for describing reversible logic

    DEFF Research Database (Denmark)

    Thomsen, Michael Kirkedal

    2012-01-01

    Reversible logic is a computational model where all gates are logically reversible and combined in circuits such that no values are lost or duplicated. This paper presents a novel functional language that is designed to describe only reversible logic circuits. The language includes high....... Reversibility of descriptions is guaranteed with a type system based on linear types. The language is applied to three examples of reversible computations (ALU, linear cosine transformation, and binary adder). The paper also outlines a design flow that ensures garbage- free translation to reversible logic...... circuits. The flow relies on a reversible combinator language as an intermediate language....

  5. Population-based assessment of prevalence and causes of visual impairment in the state of Telangana, India: a cross-sectional study using the Rapid Assessment of Visual Impairment (RAVI) methodology.

    Science.gov (United States)

    Marmamula, Srinivas; Khanna, Rohit C; Kunkunu, Eswararao; Rao, Gullapalli N

    2016-12-15

    To assess the prevalence and causes of visual impairment (VI) among a rural population aged 40 years and older in the state of Telangana in India. Population-based cross-sectional study. Districts of Adilabad and Mahbubnagar in south Indian state of Telangana, India. A sample of 6150 people was selected using cluster random sampling methodology. A team comprising a trained vision technician and a field worker visited the households and conducted the eye examination. Presenting, pinhole and aided visual acuity were assessed. Anterior segment was examined using a torchlight. Lens was examined using distant direct ophthalmoscopy in a semidark room. In all, 5881 (95.6%) participants were examined from 123 study clusters. Among those examined, 2723 (46.3%) were men, 4824 (82%) had no education, 2974 (50.6%) were from Adilabad district and 1694 (28.8%) of them were using spectacles at the time of eye examination. VI was defined as presenting visual acuity <6/18 in the better eye and it included moderate VI (<6/18 to 6/60) and blindness (<6/60). The age-adjusted and gender-adjusted prevalence of VI was 15.0% (95% CI 14.1% to 15.9%). On applying binary logistic regression analysis, VI was associated with older age groups. The odds of having VI were higher among women (OR 1.2; 95% CI 1.0 to 1.4). Having any education (OR 0.4; 95% CI 0.3 to 0.6) and current use of glasses (OR 0.19; 95% CI 0.1 to 0.2) were protective. VI was also higher in Mahbubnagar (OR 1.0 to 1.5) district. Cataract (54.7%) was the leading cause of VI followed by uncorrected refractive errors (38.6%). VI continues to remain a challenge in rural Telangana. As over 90% of the VI is avoidable, massive eye care programmes are required to address the burden of VI in Telangana. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  6. Using neural networks to describe tracer correlations

    Directory of Open Access Journals (Sweden)

    D. J. Lary

    2004-01-01

    Full Text Available Neural networks are ideally suited to describe the spatial and temporal dependence of tracer-tracer correlations. The neural network performs well even in regions where the correlations are less compact and normally a family of correlation curves would be required. For example, the CH4-N2O correlation can be well described using a neural network trained with the latitude, pressure, time of year, and methane volume mixing ratio (v.m.r.. In this study a neural network using Quickprop learning and one hidden layer with eight nodes was able to reproduce the CH4-N2O correlation with a correlation coefficient between simulated and training values of 0.9995. Such an accurate representation of tracer-tracer correlations allows more use to be made of long-term datasets to constrain chemical models. Such as the dataset from the Halogen Occultation Experiment (HALOE which has continuously observed CH4  (but not N2O from 1991 till the present. The neural network Fortran code used is available for download.

  7. On Redundancy in Describing Linguistic Systems

    Directory of Open Access Journals (Sweden)

    Vladimir Borissov Pericliev

    2015-12-01

    Full Text Available On Redundancy in Describing Linguistic Systems The notion of system of linguistic elements figures prominently in most post-Saussurian linguistics up to the present. A “system” is the network of the contrastive (or, distinctive features each element in the system bears to the remaining elements. The meaning (valeur of each element in the system is the set of features that are necessary and jointly sufficient to distinguish this element from all others. The paper addresses the problems of “redundancy”, i.e. the occurrence of features that are not strictly necessary in describing an element in a system. Redundancy is shown to smuggle into the description of linguistic systems, this infelicitous practice illustrated with some examples from the literature (e.g. the classical phonemic analysis of Russian by Cherry, Halle, and Jakobson, 1953. The logic and psychology of the occurrence of redundancy are briefly sketched and it is shown that, in addition to some other problems, redundancy leads to a huge and unresolvable ambiguity of descriptions of linguistic systems (the Buridan’s ass problem.

  8. Is an eclipse described in the Odyssey?

    Science.gov (United States)

    Baikouzis, Constantino; Magnasco, Marcelo O

    2008-07-01

    Plutarch and Heraclitus believed a certain passage in the 20th book of the Odyssey ("Theoclymenus's prophecy") to be a poetic description of a total solar eclipse. In the late 1920s, Schoch and Neugebauer computed that the solar eclipse of 16 April 1178 B.C.E. was total over the Ionian Islands and was the only suitable eclipse in more than a century to agree with classical estimates of the decade-earlier sack of Troy around 1192-1184 B.C.E. However, much skepticism remains about whether the verses refer to this, or any, eclipse. To contribute to the issue independently of the disputed eclipse reference, we analyze other astronomical references in the Epic, without assuming the existence of an eclipse, and search for dates matching the astronomical phenomena we believe they describe. We use three overt astronomical references in the epic: to Boötes and the Pleiades, Venus, and the New Moon; we supplement them with a conjectural identification of Hermes's trip to Ogygia as relating to the motion of planet Mercury. Performing an exhaustive search of all possible dates in the span 1250-1115 B.C., we looked to match these phenomena in the order and manner that the text describes. In that period, a single date closely matches our references: 16 April 1178 B.C.E. We speculate that these references, plus the disputed eclipse reference, may refer to that specific eclipse.

  9. PSA methodology development and application in Japan

    International Nuclear Information System (INIS)

    Kazuo Sato; Toshiaki Tobioka; Kiyoharu Abe

    1987-01-01

    The outlines of Japanese activities on development and application of probabilistic safety assessment (PSA) methodologies are described. First the activities on methodology development are described for system reliability analysis, operational data analysis, core melt accident analysis, environmental consequence analysis and seismic risk analysis. Then the methodoligy application examples by the regulatory side and the industry side are described. (author)

  10. Waste Package Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  11. Waste Package Design Methodology Report

    International Nuclear Information System (INIS)

    D.A. Brownson

    2001-01-01

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report

  12. Frameworks for understanding and describing business models

    DEFF Research Database (Denmark)

    Nielsen, Christian; Roslender, Robin

    2014-01-01

    This chapter provides in a chronological fashion an introduction to six frameworks that one can apply to describing, understanding and also potentially innovating business models. These six frameworks have been chosen carefully as they represent six very different perspectives on business models...... and in this manner “complement” each other. There are a multitude of varying frameworks that could be chosen from and we urge the reader to search and trial these for themselves. The six chosen models (year of release in parenthesis) are: • Service-Profit Chain (1994) • Strategic Systems Auditing (1997) • Strategy...... Maps (2001) • Intellectual Capital Statements (2003) • Chesbrough’s framework for Open Business Models (2006) • Business Model Canvas (2008)...

  13. Does Guru Granth Sahib describe depression?

    Science.gov (United States)

    Kalra, Gurvinder; Bhui, Kamaldeep; Bhugra, Dinesh

    2013-01-01

    Sikhism is a relatively young religion, with Guru Granth Sahib as its key religious text. This text describes emotions in everyday life, such as happiness, sadness, anger, hatred, and also more serious mental health issues such as depression and psychosis. There are references to the causation of these emotional disturbances and also ways to get out of them. We studied both the Gurumukhi version and the English translation of the Guru Granth Sahib to understand what it had to say about depression, its henomenology, and religious prescriptions for recovery. We discuss these descriptions in this paper and understand its meaning within the context of clinical depression. Such knowledge is important as explicit descriptions about depression and sadness can help encourage culturally appropriate assessment and treatment, as well as promote public health through education.

  14. Describing chaotic attractors: Regular and perpetual points

    Science.gov (United States)

    Dudkowski, Dawid; Prasad, Awadhesh; Kapitaniak, Tomasz

    2018-03-01

    We study the concepts of regular and perpetual points for describing the behavior of chaotic attractors in dynamical systems. The idea of these points, which have been recently introduced to theoretical investigations, is thoroughly discussed and extended into new types of models. We analyze the correlation between regular and perpetual points, as well as their relation with phase space, showing the potential usefulness of both types of points in the qualitative description of co-existing states. The ability of perpetual points in finding attractors is indicated, along with its potential cause. The location of chaotic trajectories and sets of considered points is investigated and the study on the stability of systems is shown. The statistical analysis of the observing desired states is performed. We focus on various types of dynamical systems, i.e., chaotic flows with self-excited and hidden attractors, forced mechanical models, and semiconductor superlattices, exhibiting the universality of appearance of the observed patterns and relations.

  15. Plans should abstractly describe intended behavior

    Energy Technology Data Exchange (ETDEWEB)

    Pfleger, K.; Hayes-Roth, B. [Stanford Univ., CA (United States)

    1996-12-31

    Planning is the process of formulating a potential course of action. How courses of action (plans) produced by a planning module are represented and how they are used by execution-oriented modules of a complex agent to influence or dictate behavior are critical architectural issues. In contrast to the traditional model of plans as executable programs that dictate precise behaviors, we claim that autonomous agents inhabiting dynamic, unpredictable environments can make better use of plans that only abstractly describe their intended behavior. Such plans only influence or constrain behavior, rather than dictating it. This idea has been discussed in a variety of contexts, but it is seldom incorporated into working complex agents. Experiments involving instantiations of our Adaptive Intelligent Systems architecture in a variety of domains have demonstrated the generality and usefulness of the approach, even with our currently simple plan representation and mechanisms for plan following. The behavioral benefits include (1) robust improvisation of goal-directed behavior in response to dynamic situations, (2) ready exploitation of dynamically acquired knowledge or behavioral capabilities, and (3) adaptation based on dynamic aspects of coordinating diverse behaviors to achieve multiple goals. In addition to these run-time advantages, the approach has useful implications for the design and configuration of agents. Indeed, the core ideas of the approach are natural extensions of fundamental ideas in software engineering.

  16. Describing and Enhancing Collaboration at the Computer

    Directory of Open Access Journals (Sweden)

    Ken Beatty

    2002-06-01

    Full Text Available Computer-based learning materials differ from classroom practice in that they seldom explicitly offer opportunities for collaboration. Despite this, students do collaborate, helping one another through the content and affordances of computer materials. But, in doing so, students meet with challenges. Paradoxically, these challenges can either inspire or discourage learning and second-language acquisition. This paper, based on research with twenty Hong Kong university students in a controlled experiment, evaluates challenges to collaboration at the computer as evidenced by discourse. The students were videotaped and their discourse transcribed and evaluated both qualitatively and quantitatively, according to a set of discourse markers created to describe collaborative, non-collaborative and ambiguous strategies. The paper begins by exploring the differences between collaboration and similar terms such as teamwork and cooperative learning then goes on to define collaboration in the context of computer-assisted learning. It ends by presenting practical suggestions for software designers, teachers and students to enhance collaboration at the computer.

  17. Soft Systems Methodology

    Science.gov (United States)

    Checkland, Peter; Poulter, John

    Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

  18. Describing pediatric dysphonia with nonlinear dynamic parameters

    Science.gov (United States)

    Meredith, Morgan L.; Theis, Shannon M.; McMurray, J. Scott; Zhang, Yu; Jiang, Jack J.

    2008-01-01

    Objective Nonlinear dynamic analysis has emerged as a reliable and objective tool for assessing voice disorders. However, it has only been tested on adult populations. In the present study, nonlinear dynamic analysis was applied to normal and dysphonic pediatric populations with the goal of collecting normative data. Jitter analysis was also applied in order to compare nonlinear dynamic and perturbation measures. This study’s findings will be useful in creating standards for the use of nonlinear dynamic analysis as a tool to describe dysphonia in the pediatric population. Methods The study included 38 pediatric subjects (23 children with dysphonia and 15 without). Recordings of sustained vowels were obtained from each subject and underwent nonlinear dynamic analysis and percent jitter analysis. The resulting correlation dimension (D2) and percent jitter values were compared across the two groups using t-tests set at a significance level of p = 0.05. Results It was shown that D2 values covary with the presence of pathology in children. D2 values were significantly higher in dysphonic children than in normal children (p = 0.002). Standard deviations indicated a higher level of variation in normal children’s D2 values than in dysphonic children’s D2 values. Jitter analysis showed markedly higher percent jitter in dysphonic children than in normal children (p = 0.025) and large standard deviations for both groups. Conclusion This study indicates that nonlinear dynamic analysis could be a viable tool for the detection and assessment of dysphonia in children. Further investigations and more normative data are needed to create standards for using nonlinear dynamic parameters for the clinical evaluation of pediatric dysphonia. PMID:18947887

  19. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    A final report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The applicability of some methods of statistical analysis for discontinuity data is reviewed. The requirement for remote geophysical methods of characterizing the mass is discussed and experiments using seismic and ultrasonic velocity measurements are reported. Methods of determining the in-situ stresses are described and the final results of a programme of in-situ stress measurements using the overcoring and hydrofracture methods are reported. (author)

  20. Methodological practicalities in analytical generalization

    DEFF Research Database (Denmark)

    Halkier, Bente

    2011-01-01

    generalization. Theoretically, the argumentation in the article is based on practice theory. The main part of the article describes three different examples of ways of generalizing on the basis of the same qualitative data material. There is a particular focus on describing the methodological strategies......In this article, I argue that the existing literature on qualitative methodologies tend to discuss analytical generalization at a relatively abstract and general theoretical level. It is, however, not particularly straightforward to “translate” such abstract epistemological principles into more...... operative methodological strategies for producing analytical generalizations in research practices. Thus, the aim of the article is to contribute to the discussions among qualitatively working researchers about generalizing by way of exemplifying some of the methodological practicalities in analytical...

  1. Radiotracer methodology

    International Nuclear Information System (INIS)

    Eng, R.R.

    1988-01-01

    In 1923, George Hevesy demonstrated the distribution of radioactive lead in the horsebean plant. This early demonstration of the potential use of radiotracers in biology was reinforced when J.G. Hamilton and colleagues used iodine-131 for diagnostic purposes in patients. Then in 1950 Cassen et al. designed the first scintillation counter for measuring radioiodine in the body, using calcium tungstate crystals coupled to a photomultiplier tube. This was followed by the development of the Anger camera, which permitted visualization of radiotracer distribution in biological systems. From these significant early discoveries to the present, many advances have been made. They include the discovery and production of many useful radioisotopes; the formulation of these radioisotopes into useful radiotracers; the advent of first- , and second-, and third-generation instrumentation for monitoring in vitro and in vivo distributions of new radiotracers; and the application of this knowledge to allow us to better understand physiological processes and treat disease states. Radiotracer techniques are integral to numerous techniques described in this volume. Autoradiography, nuclear scintigraphy, positron emission tomography, and single-photon emission computed tomography (SPECT) are all dependent on an understanding of radiotracer techniques to properly utilize these probe devices

  2. SG39 Deliverables. Summary of Methodology

    International Nuclear Information System (INIS)

    Yokoyama, Kenji

    2015-01-01

    For providing useful and physical feedback to nuclear data evaluators from cross section adjustment results, it is necessary to assess the reliability of the adjustment results. For instance, the adjustment results may include so-called 'compensation effects' which cause fictitious alterations of adjusted cross-sections by the cancellation of two or more reactions of cross sections. Typical compensation effects are possible in the following reactions: - Pu-239 fission spectrum and inelastic in general: Equivalent effect through neutron spectrum changes - Capture and (n,2n) for irradiation experiments: Same impact of disappearing the associated isotope - Capture and fission for spectral indices: e.g. U-238 capture (C28) and Pu-239 fission (F49) for C28/F49; Compensation between numerator and denominator - Many reactions for criticalities: Capture, fission, ν, χ, inelastic, elastic,... In addition, useless and unphysical systematic effects may occur in the cross section adjustments. To avoid the compensation effects and to point out systematic effects, several criteria with parameters/indices are recommended to use. This document summarizes the methodology with the definitions of the parameters/indices. Although a lot of parameters/indices are reported in the intermediate report of Subgroup 33, many institutions use their own different nomenclature to describe the parameters/indices about the cross section adjustment. Therefore, Subgroup 39 proposes a common nomenclature for convenience. (author)

  3. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  4. Literacy research methodologies

    CERN Document Server

    Duke, Nell K

    2012-01-01

    The definitive reference on literacy research methods, this book serves as a key resource for researchers and as a text in graduate-level courses. Distinguished scholars clearly describe established and emerging methodologies, discuss the types of questions and claims for which each is best suited, identify standards of quality, and present exemplary studies that illustrate the approaches at their best. The book demonstrates how each mode of inquiry can yield unique insights into literacy learning and teaching and how the methods can work together to move the field forward.   New to This Editi

  5. Soil Radiological Characterisation Methodology

    International Nuclear Information System (INIS)

    Attiogbe, Julien; Aubonnet, Emilie; De Maquille, Laurence; De Moura, Patrick; Desnoyers, Yvon; Dubot, Didier; Feret, Bruno; Fichet, Pascal; Granier, Guy; Iooss, Bertrand; Nokhamzon, Jean-Guy; Ollivier Dehaye, Catherine; Pillette-Cousin, Lucien; Savary, Alain

    2014-12-01

    This report presents the general methodology and best practice approaches which combine proven existing techniques for sampling and characterisation to assess the contamination of soils prior to remediation. It is based on feedback of projects conducted by main French nuclear stakeholders involved in the field of remediation and dismantling (EDF, CEA, AREVA and IRSN). The application of this methodology will enable the project managers to obtain the elements necessary for the drawing up of files associated with remediation operations, as required by the regulatory authorities. It is applicable to each of the steps necessary for the piloting of remediation work-sites, depending on the objectives targeted (release into the public domain, re-use, etc.). The main part describes the applied statistical methodology with the exploratory analysis and variogram data, identification of singular points and their location. The results obtained permit assessment of a mapping to identify the contaminated surface and subsurface areas. It stakes the way for radiological site characterisation since the initial investigations from historical and functional analysis to check that the remediation objectives have been met. It follows an example application from the feedback of the remediation of a contaminated site on the Fontenay aux Roses facility. It is supplemented by a glossary of main terms used in the field from different publications or international standards. This technical report is a support of the ISO Standard ISO ISO/TC 85/SC 5 N 18557 'Sampling and characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes'. (authors) [fr

  6. 26 CFR 1.367(e)-2 - Distributions described in section 367(e)(2).

    Science.gov (United States)

    2010-04-01

    ... domestic subsidiary corporation's stock is the avoidance of U.S. tax that would have been imposed on the... distribution may have a principal purpose of tax avoidance even though the tax avoidance purpose is outweighed... been made pursuant to a plan, one of the principal purposes of which was the avoidance of U.S. tax, if...

  7. 26 CFR 1.6662-6 - Transactions between persons described in section 482 and net section 482 transfer price...

    Science.gov (United States)

    2010-04-01

    ... rules of this paragraph (a)(2) apply to the consolidated income tax return of the group. (3) Identical... INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and Assessable Penalties § 1.6662-6 Transactions between persons...

  8. In their own words: describing Canadian physician leadership.

    Science.gov (United States)

    Snell, Anita J; Dickson, Graham; Wirtzfeld, Debrah; Van Aerde, John

    2016-07-04

    Purpose This is the first study to compile statistical data to describe the functions and responsibilities of physicians in formal and informal leadership roles in the Canadian health system. This mixed-methods research study offers baseline data relative to this purpose, and also describes physician leaders' views on fundamental aspects of their leadership responsibility. Design/methodology/approach A survey with both quantitative and qualitative fields yielded 689 valid responses from physician leaders. Data from the survey were utilized in the development of a semi-structured interview guide; 15 physician leaders were interviewed. Findings A profile of Canadian physician leadership has been compiled, including demographics; an outline of roles, responsibilities, time commitments and related compensation; and personal factors that support, engage and deter physicians when considering taking on leadership roles. The role of health-care organizations in encouraging and supporting physician leadership is explicated. Practical implications The baseline data on Canadian physician leaders create the opportunity to determine potential steps for improving the state of physician leadership in Canada; and health-care organizations are provided with a wealth of information on how to encourage and support physician leaders. Using the data as a benchmark, comparisons can also be made with physician leadership as practiced in other nations. Originality/value There are no other research studies available that provide the depth and breadth of detail on Canadian physician leadership, and the embedded recommendations to health-care organizations are informed by this in-depth knowledge.

  9. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    ... in the pharmaceutical industry, Clinical trial methodology emphasizes the importance of statistical thinking in clinical research and presents the methodology as a key component of clinical research...

  10. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  11. Cesarean Sections

    Science.gov (United States)

    ... birth after a C-section, called a VBAC ) Emergency C-Sections Some C-sections are unexpected emergency ... side to nurse or using the clutch (or football) hold can take the pressure off your abdomen. ...

  12. Exploration of the methodological quality and clinical usefulness of a cross-sectional sample of published guidance about exercise training and physical activity for the secondary prevention of coronary heart disease.

    Science.gov (United States)

    Abell, Bridget; Glasziou, Paul; Hoffmann, Tammy

    2017-06-13

    Clinicians are encouraged to use guidelines to assist in providing evidence-based secondary prevention to patients with coronary heart disease. However, the expanding number of publications providing guidance about exercise training may confuse cardiac rehabilitation clinicians. We therefore sought to explore the number, scope, publication characteristics, methodological quality, and clinical usefulness of published exercise-based cardiac rehabilitation guidance. We included publications recommending physical activity, exercise or cardiac rehabilitation for patients with coronary heart disease. These included systematically developed clinical practice guidelines, as well as other publications intended to support clinician decision making, such as position papers or consensus statements. Publications were obtained via electronic searches of preventive cardiology societies, guideline databases and PubMed, to November 2016. Publication characteristics were extracted, and two independent assessors evaluated quality using the 23-item Appraisal of Guidelines Research and Evaluation II (AGREE) tool. Fifty-four international publications from 1994 to 2016 were identified. Most were found on preventive cardiology association websites (n = 35; 65%) and were freely accessible (n = 50; 93%). Thirty (56%) publications contained only broad recommendations for physical activity and cardiac rehabilitation referral, while 24 (44%) contained the necessary detailed exercise training recommendations. Many were labelled as "guidelines", however publications with other titles (e.g. scientific statements) were common (n = 24; 44%). This latter group of publications contained a significantly greater proportion of detailed exercise training recommendations than clinical guidelines (p = 0.017). Wide variation in quality also existed, with 'applicability' the worst scoring AGREE II domain for clinical guidelines (mean score 53%) and 'rigour of development' rated lowest for other

  13. Intelligent systems engineering methodology

    Science.gov (United States)

    Fouse, Scott

    1990-01-01

    An added challenge for the designers of large scale systems such as Space Station Freedom is the appropriate incorporation of intelligent system technology (artificial intelligence, expert systems, knowledge-based systems, etc.) into their requirements and design. This presentation will describe a view of systems engineering which successfully addresses several aspects of this complex problem: design of large scale systems, design with requirements that are so complex they only completely unfold during the development of a baseline system and even then continue to evolve throughout the system's life cycle, design that involves the incorporation of new technologies, and design and development that takes place with many players in a distributed manner yet can be easily integrated to meet a single view of the requirements. The first generation of this methodology was developed and evolved jointly by ISX and the Lockheed Aeronautical Systems Company over the past five years on the Defense Advanced Research Projects Agency/Air Force Pilot's Associate Program, one of the largest, most complex, and most successful intelligent systems constructed to date. As the methodology has evolved it has also been applied successfully to a number of other projects. Some of the lessons learned from this experience may be applicable to Freedom.

  14. Dos aproximaciones a la metodología de diseño a momento flexionante de secciones T en concreto reforzado que se comportan como rectangulares y constituyen la sección recta de la viguetería de losas aligeradas Two approaches to design methodology at T sections bending moment in reinforced concrete which behave as rectangular sections and constitute the straight sections of beams of light slabs

    Directory of Open Access Journals (Sweden)

    José Christian Chanchí Golondrino

    2008-01-01

    of the T shaped cross section. It has designed geometrically a set of slabs (built from T shaped beams according to the regulations presented in the chapter C13 of the Seismic Constructions Colombian Code. The other hand the reinforcement associated to the slabs was obtained for single supported T shaped beams with spans in the range [2 - 7] m and separations between them in the range [0.30 - 1.00] m. The design process described above was used to check the reliability of the discussed approaches with respect to the general solution (quadratic equation used to obtain the reinforcement of a T shaped beam when the behaviour of its section is close to a rectangular equivalent cross section.

  15. Using smooth sheets to describe groundfish habitat in Alaskan waters, with specific application to two flatfishes

    Science.gov (United States)

    Zimmermann, Mark; Reid, Jane A.; Golden, Nadine

    2016-01-01

    In this analysis we demonstrate how preferred fish habitat can be predicted and mapped for juveniles of two Alaskan groundfish species – Pacific halibut (Hippoglossus stenolepis) and flathead sole (Hippoglossoides elassodon) – at five sites (Kiliuda Bay, Izhut Bay, Port Dick, Aialik Bay, and the Barren Islands) in the central Gulf of Alaska. The method involves using geographic information system (GIS) software to extract appropriate information from National Ocean Service (NOS) smooth sheets that are available from NGDC (the National Geophysical Data Center). These smooth sheets are highly detailed charts that include more soundings, substrates, shoreline and feature information than the more commonly-known navigational charts. By bringing the information from smooth sheets into a GIS, a variety of surfaces, such as depth, slope, rugosity and mean grain size were interpolated into raster surfaces. Other measurements such as site openness, shoreline length, proportion of bay that is near shore, areas of rocky reefs and kelp beds, water volumes, surface areas and vertical cross-sections were also made in order to quantify differences between the study sites. Proper GIS processing also allows linking the smooth sheets to other data sets, such as orthographic satellite photographs, topographic maps and precipitation estimates from which watersheds and runoff can be derived. This same methodology can be applied to larger areas, taking advantage of these free data sets to describe predicted groundfish essential fish habitat (EFH) in Alaskan waters.

  16. Supplement to a Methodology for Succession Planning for Technical Experts

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, Bernadette Lugue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cain, Ronald A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Agreda, Carla L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-11-01

    This report complements A Methodology for Succession Planning for Technical Experts (Ron Cain, Shaheen Dewji, Carla Agreda, Bernadette Kirk, July 2017), which describes a draft methodology for identifying and evaluating the loss of key technical skills at nuclear operations facilities. This report targets the methodology for identifying critical skills, and the methodology is tested through interviews with selected subject matter experts.

  17. Polynomial parameterized representation of macroscopic cross section for PWR reactor

    International Nuclear Information System (INIS)

    Fiel, Joao Claudio B.

    2015-01-01

    The purpose of this work is to describe, by means of Tchebychev polynomial, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 U 92 enrichment. Analyzed cross sections are: fission, scattering, total, transport, absorption and capture. This parameterization enables a quick and easy determination of the problem-dependent cross-sections to be used in few groups calculations. The methodology presented here will enable to provide cross-sections values to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by parameterized cross-sections functions, when compared with the cross-section generated by SCALE code calculations, or when compared with K inf , generated by MCNPX code calculations, show a difference of less than 0.7 percent. (author)

  18. Parameterized representation of macroscopic cross section for PWR reactor

    International Nuclear Information System (INIS)

    Fiel, João Cláudio Batista; Carvalho da Silva, Fernando; Senra Martinez, Aquilino; Leal, Luiz C.

    2015-01-01

    Highlights: • This work describes a parameterized representation of the homogenized macroscopic cross section for PWR reactor. • Parameterization enables a quick determination of problem-dependent cross-sections to be used in few group calculations. • This work allows generating group cross-section data to perform PWR core calculations without computer code calculations. - Abstract: The purpose of this work is to describe, by means of Chebyshev polynomials, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 92 U enrichment. The cross-section data analyzed are fission, scattering, total, transport, absorption and capture. The parameterization enables a quick and easy determination of problem-dependent cross-sections to be used in few group calculations. The methodology presented in this paper will allow generation of group cross-section data from stored polynomials to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by the proposed methodology when compared with results from the SCALE code calculations show very good agreement

  19. Acoustic emission methodology and application

    CERN Document Server

    Nazarchuk, Zinoviy; Serhiyenko, Oleh

    2017-01-01

    This monograph analyses in detail the physical aspects of the elastic waves radiation during deformation or fracture of materials. I presents the  methodological bases for the practical use of acoustic emission device, and describes the results of theoretical and experimental researches of evaluation of the crack growth resistance of materials, selection of the useful AE signals. The efficiency of this methodology is shown through the diagnostics of various-purpose industrial objects. The authors obtain results of experimental researches with the help of the new methods and facilities.

  20. Observational methodology in sport sciences

    Directory of Open Access Journals (Sweden)

    M. Teresa Anguera

    2013-11-01

    Full Text Available This paper reviews the conceptual framework, the key literature and the methods (observation tools, such as category systems and field formats, and coding software, etc. that should be followed when conducting research from the perspective of observational methodology. The observational designs used by the authors’ research group over the last twenty years are discussed, and the procedures for analysing data and assessing their quality are described. Mention is also made of the latest methodological trends in this field, such as the use of mixed methods.

  1. The GPT methodology. New fields of application

    International Nuclear Information System (INIS)

    Gandini, A.; Gomit, J.M.; Abramytchev, V.

    1996-01-01

    The GPT (Generalized Perturbation Theory) methodology is described, and a new application is discussed. The results obtained for a simple model (zero dimension, six parameters of interest) show that the expressions obtained using the GPT methodology, lead to results close to those obtained through direct calculations. The GPT methodology is useful to be used for radioactive waste disposal problems. The potentiality of the method linked to zero dimension model can be extended to radionuclide migration problems with space description. (K.A.)

  2. A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

    Science.gov (United States)

    Bailey, Brandon

    2016-01-01

    Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

  3. Risk factors for asthma and allergy associated with urban migration: background and methodology of a cross-sectional study in Afro-Ecuadorian school children in Northeastern Ecuador (Esmeraldas-SCAALA Study).

    Science.gov (United States)

    Cooper, Philip J; Chico, Martha E; Vaca, Maritza G; Rodriguez, Alejandro; Alcântara-Neves, Neuza M; Genser, Bernd; de Carvalho, Lain Pontes; Stein, Renato T; Cruz, Alvaro A; Rodrigues, Laura C; Barreto, Mauricio L

    2006-09-13

    Asthma and allergic diseases are becoming increasingly frequent in children in urban centres of Latin America although the prevalence of allergic disease is still low in rural areas. Understanding better why the prevalence of asthma is greater in urban migrant populations and the role of risk factors such as life style and environmental exposures, may be key to understand what is behind this trend. The Esmeraldas-SCAALA (Social Changes, Asthma and Allergy in Latin America) study consists of cross-sectional and nested case-control studies of school children in rural and urban areas of Esmeraldas Province in Ecuador. The cross-sectional study will investigate risk factors for atopy and allergic disease in rural and migrant urban Afro-Ecuadorian school children and the nested case-control study will examine environmental, biologic and social risk factors for asthma among asthma cases and non-asthmatic controls from the cross-sectional study. Data will be collected through standardised questionnaires, skin prick testing to relevant aeroallergen extracts, stool examinations for parasites, blood sampling (for measurement of IgE, interleukins and other immunological parameters), anthropometric measurements for assessment of nutritional status, exercise testing for assessment of exercise-induced bronchospasm and dust sampling for measurement of household endotoxin and allergen levels. The information will be used to identify the factors associated with an increased risk of asthma and allergies in migrant and urbanizing populations, to improve the understanding of the causes of the increase in asthma prevalence and to identify potentially modifiable factors to inform the design of prevention programmes to reduce the risk of allergy in urban populations in Latin America.

  4. Risk factors for asthma and allergy associated with urban migration: background and methodology of a cross-sectional study in Afro-Ecuadorian school children in Northeastern Ecuador (Esmeraldas-SCAALA Study

    Directory of Open Access Journals (Sweden)

    Stein Renato T

    2006-09-01

    Full Text Available Abstract Background Asthma and allergic diseases are becoming increasingly frequent in children in urban centres of Latin America although the prevalence of allergic disease is still low in rural areas. Understanding better why the prevalence of asthma is greater in urban migrant populations and the role of risk factors such as life style and environmental exposures, may be key to understand what is behind this trend. Methods/design The Esmeraldas-SCAALA (Social Changes, Asthma and Allergy in Latin America study consists of cross-sectional and nested case-control studies of school children in rural and urban areas of Esmeraldas Province in Ecuador. The cross-sectional study will investigate risk factors for atopy and allergic disease in rural and migrant urban Afro-Ecuadorian school children and the nested case-control study will examine environmental, biologic and social risk factors for asthma among asthma cases and non-asthmatic controls from the cross-sectional study. Data will be collected through standardised questionnaires, skin prick testing to relevant aeroallergen extracts, stool examinations for parasites, blood sampling (for measurement of IgE, interleukins and other immunological parameters, anthropometric measurements for assessment of nutritional status, exercise testing for assessment of exercise-induced bronchospasm and dust sampling for measurement of household endotoxin and allergen levels. Discussion The information will be used to identify the factors associated with an increased risk of asthma and allergies in migrant and urbanizing populations, to improve the understanding of the causes of the increase in asthma prevalence and to identify potentially modifiable factors to inform the design of prevention programmes to reduce the risk of allergy in urban populations in Latin America.

  5. Clean Energy Manufacturing Analysis Center Benchmark Report: Framework and Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engel-Cox, Jill [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-05-23

    This report documents the CEMAC methodologies for developing and reporting annual global clean energy manufacturing benchmarks. The report reviews previously published manufacturing benchmark reports and foundational data, establishes a framework for benchmarking clean energy technologies, describes the CEMAC benchmark analysis methodologies, and describes the application of the methodologies to the manufacturing of four specific clean energy technologies.

  6. Design Methodologies: Industrial and Educational Applications

    NARCIS (Netherlands)

    Tomiyama, T.; Gul, P.; Jin, Y.; Lutters, Diederick; Kind, Ch.; Kimura, F.

    2009-01-01

    The field of Design Theory and Methodology has a rich collection of research results that has been taught at educational institutions as well as applied to design practices. First, this keynote paper describes some methods to classify them. It then illustrates individual theories and methodologies

  7. Identification and systems methodologies for territorial delimitation

    Directory of Open Access Journals (Sweden)

    Iván Montoya R

    2010-12-01

    Full Text Available This document identifies the main issues affecting the delimitation of territories and explores the conceptual approaches for describing the relationship of the territories understood as organizations with their environment. Subsequently, we studied the systems methodologies known as soft systems methodology, SSM, and complex adaptive systems, CAS. Finally, the advantages of systemic approaches to territorial delimitation are shown

  8. Creating and evaluating a new clicker methodology

    Science.gov (United States)

    Li, Pengfei

    "Clickers", an in-class polling system, has been used by many instructors to add active learning and formative assessment to previously passive traditional lectures. While considerable research has been conducted on clicker increasing student interaction in class, less research has been reported on the effectiveness of using clicker to help students understand concepts. This thesis reported a systemic project by the OSU Physics Education group to develop and test a new clicker methodology. Clickers question sequences based on a constructivist model of learning were used to improve classroom dynamics and student learning. They also helped students and lecturers understand in real time whether a concept had been assimilated or more effort was required. Chapter 1 provided an introduction to the clicker project. Chapter 2 summarized widely-accepted teaching principles that have arisen from a long history of research and practice in psychology, cognitive science and physics education. The OSU clicker methodology described in this thesis originated partly from our years of teaching experience, but mostly was based on these teaching principles. Chapter 3 provided an overview of the history of clicker technology and different types of clickers. Also, OSU's use of clickers was summarized together with a list of common problems and corresponding solutions. These technical details may be useful for those who want to use clickers. Chapter 4 discussed examples of the type and use of question sequences based on the new clicker methodology. In several years of research, we developed a base of clicker materials for calculus-based introductory physics courses at OSU. As discussed in chapter 5, a year-long controlled quantitative study was conducted to determine whether using clickers helps students learn, how using clickers helps students learn and whether students perceive that clicker has a positive effect on their own learning process. The strategy for this test was based on

  9. A Methodology for Teaching Industrial Ecology

    Science.gov (United States)

    Cervantes, Gemma

    2007-01-01

    Purpose: To describe a way of teaching industrial ecology (IE) and to show some tools that may help for the IE teaching. Design/methodology/approach: In the paper, the development of lectures, practical lessons and projects on real industrial ecosystems are described. Also the teaching materials used are described. Findings: The presented…

  10. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1992-03-01

    This report describes risk assessment methodology associated with the remedial action programs at the Hanford Reservation. Topics addressed include human health evaluation, pollutant and radionuclide transport through the environment, and environmental transport pathways

  11. A Methodology Inventory for Composition Education.

    Science.gov (United States)

    Donlan, Dan

    1979-01-01

    Illustrates one method for describing changes in classroom behavior of composition teachers: a methodology inventory that may be used as an indicator of expertise, a needs assessment, and a summative self-evaluation. (DD)

  12. Predictions and implications of a poisson process model to describe corrosion of transuranic waste drums

    International Nuclear Information System (INIS)

    Lyon, B.F.; Holmes, J.A.; Wilbert, K.A.

    1995-01-01

    A risk assessment methodology is described in this paper to compare risks associated with immediate or near-term retrieval of transuranic (TRU) waste drums from bermed storage versus delayed retrieval. Assuming a Poisson process adequately describes corrosion, significant breaching of drums is expected to begin at - 15 and 24 yr for pitting and general corrosion, respectively. Because of this breaching, more risk will be incurred by delayed than by immediate retrieval

  13. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

    1999-01-01

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  14. Jet inclusive cross sections

    International Nuclear Information System (INIS)

    Del Duca, V.

    1992-11-01

    Minijet production in jet inclusive cross sections at hadron colliders, with large rapidity intervals between the tagged jets, is evaluated by using the BFKL pomeron. We describe the jet inclusive cross section for an arbitrary number of tagged jets, and show that it behaves like a system of coupled pomerons

  15. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  16. EVALUATION OF THE GRAI INTEGRATED METHODOLOGY AND THE IMAGIM SUPPORTWARE

    Directory of Open Access Journals (Sweden)

    J.M.C. Reid

    2012-01-01

    Full Text Available This paper describes the GRAI Integrated Methodology and identifies the need for computer tools to support enterprise modelling,design and integration. The IMAGIM tool is then evaluated in terms of its ability to support the GRAI Integrated Methodology. The GRAI Integrated Methodology is an Enterprise Integration methodology developed to support the design of CIM systems . The GRAI Integrated Methodology consists of the GRAI model and a structured approach. The latest addition to the methodology is the IMAGIM software tool developed by the GRAI research group for the specific purpose of supporting the methodology.

  17. Activities of the JILA Atomic Collisions Cross Sections Data Center

    International Nuclear Information System (INIS)

    Gallagher, J.W.

    1983-01-01

    The JILA Atomic Collisions Cross Sections Data Center compiles, critically evaluates, and reviews cross sections and rates for low energy (<100 keV) collisions of electrons, photons, and heavy particles with atoms, ions, and simple molecules. Reports are prepared which provide easily accessible recommended data with error limits, list the fundamental literature related to specific topics, identify regions where data are missing, and point out inconsistencies in existing data. The general methodology used in producing evaluated compilations is described. Recently completed projects and work in progress are reported

  18. Scenario development methodologies

    International Nuclear Information System (INIS)

    Eng, T.; Hudson, J.; Stephansson, O.

    1994-11-01

    In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are a) Event tree analysis, b) Influence diagrams and c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs

  19. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  20. The methodology of semantic analysis for extracting physical effects

    Science.gov (United States)

    Fomenkova, M. A.; Kamaev, V. A.; Korobkin, D. M.; Fomenkov, S. A.

    2017-01-01

    The paper represents new methodology of semantic analysis for physical effects extracting. This methodology is based on the Tuzov ontology that formally describes the Russian language. In this paper, semantic patterns were described to extract structural physical information in the form of physical effects. A new algorithm of text analysis was described.

  1. A methodology for string resolution

    International Nuclear Information System (INIS)

    Karonis, N.T.

    1992-11-01

    In this paper we present a methodology, not a tool. We present this methodology with the intent that it be adopted, on a case by case basis, by each of the existing tools in EPICS. In presenting this methodology, we describe each of its two components in detail and conclude with an example depicting how the methodology can be used across a pair of tools. The task of any control system is to provide access to the various components of the machine being controlled, for example, the Advanced Photon Source (APS). By access, we mean the ability to monitor the machine's status (reading) as well as the ability to explicitly change its status (writing). The Experimental Physics and Industrial Control System (EPICS) is a set of tools, designed to act in concert, that allows one to construct a control system. EPICS provides the ability to construct a control system that allows reading and writing access to the machine. It does this through the notion of databases. Each of the components of the APS that is accessed by the control system is represented in EPICS by a set of named database records. Once this abstraction is made, from physical device to named database records, the process of monitoring and changing the state of that device becomes the simple process of reading and writing information from and to its associated named records

  2. Constraint effects in heavy-section steels

    International Nuclear Information System (INIS)

    Bass, B.R.; Shum, D.K.M.; Keeney-Walker, J.; Theiss, T.J.

    1993-01-01

    A focal point of the Nuclear Regulatory Commission-funded Heavy-Section Steel Technology (HSST) Program is the development of technology required for accurate assessment of fracture-prevention margins in commercial nuclear reactor pressure vessels (RPVs). In a series of investigations, the HSST Program is seeking to obtain an improved understanding of the relationships governing transfer of fracture toughness data from small-scale specimens to large-scale structures. This paper describes two analytical approaches to the transferability issues that are being evaluated in the HSST Program. One is a continuum correlative methodology based on two-parameter descriptions (K-T or J-Q) of the near crack-tip fields that incorporate effects of the higher-order T-stress for linear-elastic fracture mechanics conditions or the Q-stress for more general elastic-plastic fracture mechanics conditions. The second approach utilizes a micromechanical predictive methodology that relates cleavage crack initiation to the attainment of a critical volume enclosed within a selected maximum principal stress contour surrounding the crack tip. In preliminary evaluations, these methodologies were applied to experimental data taken from several intermediate- and large-scale testing programs. Results and conclusions from these applications are discussed in the paper. Applications of the methodologies to analytical studies concerning biaxial stress effects on fracture toughness and safety margin assessments of an RPV subjected to pressurized-thermal-shock transient loadings are also presented. While these fracture methodologies appear to show promise in being able to differentiate among crack-tip constraint levels, numerous issues were identified in the HSST studies that require further investigation. Recommendations are given concerning future work intended to resolve several of these issues. 42 refs., 26 figs., 1 tab

  3. 29 CFR 794.103 - Dependence of exemption on engagement in described distribution.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Dependence of exemption on engagement in described distribution. 794.103 Section 794.103 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... Act Scope and Application in General § 794.103 Dependence of exemption on engagement in described...

  4. Introduction to LCA Methodology

    DEFF Research Database (Denmark)

    Hauschild, Michael Z.

    2018-01-01

    In order to offer the reader an overview of the LCA methodology in the preparation of the more detailed description of its different phases, a brief introduction is given to the methodological framework according to the ISO 14040 standard and the main elements of each of its phases. Emphasis...

  5. Methodologies, languages and tools

    International Nuclear Information System (INIS)

    Amako, Katsuya

    1994-01-01

    This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

  6. Menopause and Methodological Doubt

    Science.gov (United States)

    Spence, Sheila

    2005-01-01

    Menopause and methodological doubt begins by making a tongue-in-cheek comparison between Descartes' methodological doubt and the self-doubt that can arise around menopause. A hermeneutic approach is taken in which Cartesian dualism and its implications for the way women are viewed in society are examined, both through the experiences of women…

  7. VEM: Virtual Enterprise Methodology

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a virtual enterprise methodology (VEM) that outlines activities to consider when setting up and managing virtual enterprises (VEs). As a methodology the VEM helps companies to ask the right questions when preparing for and setting up an enterprise network, which works...

  8. Data Centric Development Methodology

    Science.gov (United States)

    Khoury, Fadi E.

    2012-01-01

    Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

  9. The Methodology of Magpies

    Science.gov (United States)

    Carter, Susan

    2014-01-01

    Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

  10. Methodological issues involved in conducting qualitative research ...

    African Journals Online (AJOL)

    The purpose of this article is to describe the methodological issues involved in conducting qualitative research to explore and describe nurses' experience of being directly involved with termination of pregnancies and developing guidelines for support for these nurses. The article points out the sensitivity and responsibility ...

  11. Multicriteria methodology for decision aiding

    CERN Document Server

    Roy, Bernard

    1996-01-01

    This is the first comprehensive book to present, in English, the multicriteria methodology for decision aiding In the foreword the distinctive features and main ideas of the European School of MCDA are outlined The twelve chapters are essentially expository in nature, but scholarly in treatment Some questions, which are too often neglected in the literature on decision theory, such as how is a decision made, who are the actors, what is a decision aiding model, how to define the set of alternatives, are discussed Examples are used throughout the book to illustrate the various concepts Ways to model the consequences of each alternative and building criteria taking into account the inevitable imprecisions, uncertainties and indeterminations are described and illustrated The three classical operational approaches of MCDA synthesis in one criterion (including MAUT), synthesis by outranking relations, interactive local judgements, are studied This methodology tries to be a theoretical or intellectual framework dire...

  12. Mo(ve)ment-methodology

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Christian Celosse-Andersen, Martin

    2018-01-01

    This paper describes the theoretical basis for and development of a moment-movement research methodology, based on an integration of critical psychological practice research and critical ethnographic social practice theory. Central theoretical conceptualizations, such as human agency, life...... conditions and identity formation, are discussed in relation to criminological theories of gang desistance. The paper illustrates how the mo(ve)ment methodology was applied in a study of comprehensive processes of identity (re)formation and gang exit processes. This study was conducted with Martin, a former....... This is a moment which captures Martin’s complex and ambiguous feelings of conflictual concerns, frustration, anger, and a new feeling of insecurity in his masculinity, as well as engagement and a sense of deep meaningfulness as he becomes a more reflective academic. All these conflicting feelings also give...

  13. Bibliography Section.

    Science.gov (United States)

    Totten, Sam

    1983-01-01

    This annotated listing describes materials dealing with nuclear warfare, including annotated bibliographies, nonfiction, fiction, organizations, journals, newsletters, and curriculum materials for elementary and secondary schools. (RM)

  14. Methodology for performing surveys for fixed contamination

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1994-10-01

    This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

  15. Country report: a methodology

    International Nuclear Information System (INIS)

    Colin, A.

    2013-01-01

    This paper describes a methodology which could be applicable to establish a country report. In the framework of nuclear non proliferation appraisal and IAEA safeguards implementation, it is important to be able to assess the potential existence of undeclared nuclear materials and activities as undeclared facilities in the country under review. In our views a country report should aim at providing detailed information on nuclear related activities for each country examined taken 'as a whole' such as nuclear development, scientific and technical capabilities, etc. In order to study a specific country, we need to know if there is already an operating nuclear civil programme or not. In the first case, we have to check carefully if it could divert nuclear material, if there are misused declared facilities or if they operate undeclared facilities and conduct undeclared activities aiming at manufacturing nuclear weapon. In the second case, we should pay attention to the development of a nuclear civil project. A country report is based on a wide span of information (most of the time coming from open sources but sometimes coming also from confidential or private ones). Therefore, it is important to carefully check the nature and the credibility (reliability?) of these sources through cross-check examination. Eventually, it is necessary to merge information from different sources and apply an expertise filter. We have at our disposal a lot of performing tools to help us to assess, understand and evaluate the situation (cartography, imagery, bibliometry, etc.). These tools allow us to offer the best conclusions as far as possible. The paper is followed by the slides of the presentation. (author)

  16. Describing Earth system simulations with the Metafor CIM

    Directory of Open Access Journals (Sweden)

    B. N. Lawrence

    2012-11-01

    Full Text Available The Metafor project has developed a common information model (CIM using the ISO19100 series formalism to describe numerical experiments carried out by the Earth system modelling community, the models they use, and the simulations that result. Here we describe the mechanism by which the CIM was developed, and its key properties. We introduce the conceptual and application versions and the controlled vocabularies developed in the context of supporting the fifth Coupled Model Intercomparison Project (CMIP5. We describe how the CIM has been used in experiments to describe model coupling properties and describe the near term expected evolution of the CIM.

  17. Nondestructive assay methodologies in nuclear forensics analysis

    International Nuclear Information System (INIS)

    Tomar, B.S.

    2016-01-01

    In the present chapter, the nondestructive assay (NDA) methodologies used for analysis of nuclear materials as a part of nuclear forensic investigation have been described. These NDA methodologies are based on (i) measurement of passive gamma and neutrons emitted by the radioisotopes present in the nuclear materials, (ii) measurement of gamma rays and neutrons emitted after the active interrogation of the nuclear materials with a source of X-rays, gamma rays or neutrons

  18. Nuclear power plant simulation facility evaluation methodology

    International Nuclear Information System (INIS)

    Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

    1985-01-01

    A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

  19. Nuclear EMP: ingredients of an EMP protection engineering methodology

    International Nuclear Information System (INIS)

    Latorre, V.R.; Spogen, L.R. Jr.

    1977-02-01

    A fundamental methodology of electromagnetic pulse (EMP) protection engineering is described. Operations performed within the framework of this methodology are discussed. These operations, along with problem constraints and data, constitute the essential ingredients needed to implement the overall engineering methodology. Basic definitions and descriptions of these essential ingredients are provided. The issues discussed represent the first step in developing a methodology for protecting systems against EMP effects

  20. Comparative study on software development methodologies

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2014-12-01

    Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

  1. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  2. GPS system simulation methodology

    Science.gov (United States)

    Ewing, Thomas F.

    1993-01-01

    The following topics are presented: background; Global Positioning System (GPS) methodology overview; the graphical user interface (GUI); current models; application to space nuclear power/propulsion; and interfacing requirements. The discussion is presented in vugraph form.

  3. Hazard classification methodology

    International Nuclear Information System (INIS)

    Brereton, S.J.

    1996-01-01

    This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

  4. Nonlinear Image Denoising Methodologies

    National Research Council Canada - National Science Library

    Yufang, Bao

    2002-01-01

    In this thesis, we propose a theoretical as well as practical framework to combine geometric prior information to a statistical/probabilistic methodology in the investigation of a denoising problem...

  5. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    "Now viewed as its own scientific discipline, clinical trial methodology encompasses the methods required for the protection of participants in a clinical trial and the methods necessary to provide...

  6. Continuous culture apparatus and methodology

    International Nuclear Information System (INIS)

    Conway, H.L.

    1975-01-01

    At present, we are investigating the sorption of potentially toxic trace elements by phytoplankton under controlled laboratory conditions. Continuous culture techniques were used to study the mechanism of the sorption of the trace elements by unialgal diatom populations and the factors influencing this sorption. Continuous culture methodology has been used extensively to study bacterial kinetics. It is an excellent technique for obtaining a known physiological state of phytoplankton populations. An automated method for the synthesis of continuous culture medium for use in these experiments is described

  7. Methodology of sustainability accounting

    Directory of Open Access Journals (Sweden)

    O.H. Sokil

    2017-03-01

    Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

  8. Methodology for ranking restoration options

    International Nuclear Information System (INIS)

    Hedemann Jensen, Per

    1999-04-01

    The work described in this report has been performed as a part of the RESTRAT Project FI4P-CT95-0021a (PL 950128) co-funded by the Nuclear Fission Safety Programme of the European Commission. The RESTRAT project has the overall objective of developing generic methodologies for ranking restoration techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps: characterisation of relevant contaminated sites; identification and characterisation of relevant restoration techniques; assessment of the radiological impact; development and application of a selection methodology for restoration options; formulation of generic conclusions and development of a manual. The project is intended to apply to situations in which sites with nuclear installations have been contaminated with radioactive materials as a result of the operation of these installations. The areas considered for remedial measures include contaminated land areas, rivers and sediments in rivers, lakes, and sea areas. Five contaminated European sites have been studied. Various remedial measures have been envisaged with respect to the optimisation of the protection of the populations being exposed to the radionuclides at the sites. Cost-benefit analysis and multi-attribute utility analysis have been applied for optimisation. Health, economic and social attributes have been included and weighting factors for the different attributes have been determined by the use of scaling constants. (au)

  9. How to find out in radioisotope methodology

    International Nuclear Information System (INIS)

    Evers, C.

    1976-01-01

    The subject is dealt with in sections entitled: tracing books by topic; radioisotope methodology cross reference structure; finding a review; journals and how to trace journal articles; abstract; theses and dissertations; research and development reports; critical reviews and information summaries; data books; dictionaries and encyclopedias; guides to the literature; whom to contact; expert advice, research in progress, institutions. (U.K.)

  10. Aluminium and Alzheimer's disease: the science that describes the link

    National Research Council Canada - National Science Library

    Exley, Christopher

    2001-01-01

    ... that has been encircled is the gene for the amyloid precursor protein. (Thanks to Walter Lukiw for supplying this information.) Aluminium and Alzheimer's Disease: The Science that Describes the LinkAluminium and Alzheimer's Disease The Science that Describes the Link Edited by Christopher Exley Birchall Centre for Inorganic Chemistry and Materials Scienc...

  11. Describing function theory as applied to thermal and neutronic problems

    International Nuclear Information System (INIS)

    Nassersharif, B.

    1983-01-01

    Describing functions have traditionally been used to obtain the solutions of systems of ordinary differential equations. In this work the describing function concept has been extended to include nonlinear, distributed parameter partial differential equations. A three-stage solution algorithm is presented which can be applied to any nonlinear partial differential equation. Two generalized integral transforms were developed as the T-transform for the time domain and the B-transform for the spatial domain. The thermal diffusion describing function (TDDF) is developed for conduction of heat in solids and a general iterative solution along with convergence criteria is presented. The proposed solution method is used to solve the problem of heat transfer in nuclear fuel rods with annular fuel pellets. As a special instance the solid cylindrical fuel pellet is examined. A computer program is written which uses the describing function concept for computing fuel pin temperatures in the radial direction during reactor transients. The second problem investigated was the neutron diffusion equation which is intrinsically different from the first case. Although, for most situations, it can be treated as a linear differential equation, the describing function method is still applicable. A describing function solution is derived for two possible cases: constant diffusion coefficient and variable diffusion coefficient. Two classes of describing functions are defined for each case which portray the leakage and absorption phenomena. For the specific case of a slab reactor criticality problem the comparison between analytical and describing function solutions revealed an excellent agreement

  12. Type specimens of Pectinidae (Bivalvia) described by Ignaz von Born

    NARCIS (Netherlands)

    Dijkstra, H.H.

    2009-01-01

    Born described in two publications (1778, 1780) the molluscs in the collection of Empress Maria Theresa (1717-1780), now in the Natural History Museum at Vienna. In this paper the Pectinidae type material is described. Ten new species were introduced of which Argopecten nucleus (Born, 1778) and

  13. Methodology for the interactive graphic simulator construction

    International Nuclear Information System (INIS)

    Milian S, Idalmis; Rodriguez M, Lazaro; Lopez V, Miguel A.

    1997-01-01

    The PC-supported Interactive Graphic Simulators (IGS) have successfully been used for industrial training programs in many countries. This paper is intended to illustrate the general methodology applied by our research team for the construction of this kind of conceptual or small scale simulators. The information and tools available to achieve this goal are also described. The applicability of the present methodology was confirmed with the construction of a set of IGS for nuclear power plants operators training programs in Cuba. One of them, relating reactor kinetics, is shown and briefly described in this paper. (author). 11 refs., 3 figs

  14. How completely are physiotherapy interventions described in reports of randomised trials?

    Science.gov (United States)

    Yamato, Tiê P; Maher, Chris G; Saragiotto, Bruno T; Hoffmann, Tammy C; Moseley, Anne M

    2016-06-01

    Incomplete descriptions of interventions are a common problem in reports of randomised controlled trials. To date no study has evaluated the completeness of the descriptions of physiotherapy interventions. To evaluate the completeness of the descriptions of physiotherapy interventions in a random sample of reports of randomised controlled trials (RCTs). A random sample of 200 reports of RCTs from the PEDro database. We included full text papers, written in English, and reporting trials with two arms. We included trials evaluating any type of physiotherapy interventions and subdisciplines. The methodological quality was evaluated using the PEDro scale and completeness of intervention description using the Template for Intervention Description and Replication (TIDieR) checklist. The proportion and 95% confidence interval were calculated for intervention and control groups, and used to present the relationship between completeness and methodological quality, and subdisciplines. Completeness of intervention reporting in physiotherapy RCTs was poor. For intervention groups, 46 (23%) trials did not describe at least half of the items. Reporting was worse for control groups, 149 (75%) trials described less than half of the items. There was no clear difference in the completeness across subdisciplines or methodological quality. Our sample were restricted to trials published in English in 2013. Descriptions of interventions in physiotherapy RCTs are typically incomplete. Authors and journals should aim for more complete descriptions of interventions in physiotherapy trials. Copyright © 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

  15. Sustainable Innovation and Entrepreneurship Methodology

    DEFF Research Database (Denmark)

    Celik, Sine; Joore, Peter; Christodoulou, Panayiotis

    or regional “co-creation platform for sustainable solutions” to promote structural innovation. In this manual, the Sustainable Innovation and Entrepreneurship Methodology will be described. The organisational guidelines mainly take point of departure in how Aalborg University (AAU) in Denmark has organised......The objective of the InnoLabs project is to facilitate cross-sectoral, multidisciplinary solutions to complex social problems in various European settings. InnoLabs are university-driven physical and/or organizational spaces that function as student innovation laboratories and operate as a local...... this in daily practice. In line with the objectives of the Innolabs project (output 05), partners in the Innolabs project have reflected, evaluated and concluded the project experiences, which are described in this report. The InnoLabs project was developed for the 2014 call of Erasmus+ funds KA2- Cooperation...

  16. Controlling chaos in dynamical systems described by maps

    International Nuclear Information System (INIS)

    Crispin, Y.; Marduel, C.

    1994-01-01

    The problem of suppressing chaotic behavior in dynamical systems is treated using a feedback control method with limited control effort. The proposed method is validated on archetypal systems described by maps, i.e. discrete-time difference equations. The method is also applicable to dynamical systems described by flows, i.e. by systems of ordinary differential equations. Results are presented for the one-dimensional logistic map and for a two-dimensional Lotka-Volterra map describing predator-prey population dynamics. It is shown that chaos can be suppressed and the system stabilized about a period-1 fixed point of the maps

  17. Methodology for assessing the impacts of alternative rate designs on industrial energy use. Draft report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-11

    A task was undertaken to develop a method for analyzing industrial user responses to alternative rate designs. The method described considers the fuel switching and conservation responses of industrial users and the impact to a hypothetical utility regarding revenue stability, annual gas demand, and seasonal fluctuations. Twenty-seven hypothetical industrial plant types have been specified. For each combustor in the plant, the fuel consumption by season, initial fuel type, fuel switching costs, conservation costs, and amount of fuel conservable is provided. The decision making takes place at the plant level and is aggregated to determine the impact to the utility. Section 2 discusses the factors affecting an industrial user's response to alternative rate designs. Section 3 describes the methodology, includes an overview of the model and an example industrial user's response to a set of fuel prices. The data describing the 27 hypothetical firms is in an appendix.

  18. Methodology for Modeling and Analysis of Business Processes (MMABP

    Directory of Open Access Journals (Sweden)

    Vaclav Repa

    2015-10-01

    Full Text Available This paper introduces the methodology for modeling business processes. Creation of the methodology is described in terms of the Design Science Method. Firstly, the gap in contemporary Business Process Modeling approaches is identified and general modeling principles which can fill the gap are discussed. The way which these principles have been implemented in the main features of created methodology is described. Most critical identified points of the business process modeling are process states, process hierarchy and the granularity of process description. The methodology has been evaluated by use in the real project. Using the examples from this project the main methodology features are explained together with the significant problems which have been met during the project. Concluding from these problems together with the results of the methodology evaluation the needed future development of the methodology is outlined.

  19. Storyboard GALILEO CRUISE SCIENCE OPPORTUNITIES describes asteroid encounters

    Science.gov (United States)

    1989-01-01

    Storyboard with mosaicked image of an asteroid and entitled GALILEO CRUISE SCIENCE OPPORTUNITIES describes asteroid objectives. These objectives include: first asteroid encounter; surface geology, composition size, shape, mass; and relation of primitive bodies to meteorites.

  20. Interculture: Some Concepts for Describing the Situation of Immigrants.

    Science.gov (United States)

    Ekstrand, Lars Henric; And Others

    1981-01-01

    Attempts to find new ways of describing and analyzing dynamic interactions in country of origin, host country, and immigrant community caused by migration. Analyzes linguistic models, concept of culture, emigration psychology, and identity formation. (Author/BK)

  1. Performance of density functional theory methods to describe ...

    Indian Academy of Sciences (India)

    Unknown

    Chemical compounds present different types of isomer- ism. When two isomers differ by ... of DFT methods to describe intramolecular hydrogen shifts. Three small ..... qualitative descriptions of intramolecular hydrogen shifts when large basis ...

  2. The policy trail methodology

    DEFF Research Database (Denmark)

    Holford, John; Larson, Anne; Melo, Susana

    of ‘policy trail’, arguing that it can overcome ‘methodological nationalism’ and link structure and agency in research on the ‘European educational space’. The ‘trail’ metaphor, she suggests, captures the intentionality and the erratic character of policy. The trail connects sites and brings about change......, but – although policy may be intended to be linear, with specific outcomes – policy often has to bend, and sometimes meets insurmountable obstacles. This symposium outlines and develops the methodology, but also reports on research undertaken within a major FP7 project (LLLIght’in’Europe, 2012-15) which made use......In recent years, the “policy trail” has been proposed as a methodology appropriate to the shifting and fluid governance of lifelong learning in the late modern world (Holford et al. 2013, Holford et al. 2013, Cort 2014). The contemporary environment is marked by multi-level governance (global...

  3. Zulma Ageitos de Castellanos: Publications and status of described taxa.

    Science.gov (United States)

    Signorelli, Javier H; Urteaga, Diego; Teso, Valeria

    2015-10-28

    Zulma Ageitos de Castellanos was an Argentinian malacologist working in the "Facultad de Ciencias Naturales y Museo" at La Plata University where she taught invertebrate zoology between 1947 and 1990. Her scientific publications are listed in chronological order. Described genus-group and species-group taxa are listed. Information about the type locality and type material, and taxonomic remarks are also provided. Finally, type material of all described taxa was requested and, when located, illustrated.

  4. Model checking biological systems described using ambient calculus

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Priami, Corrado; Qualia, Paola

    2005-01-01

    Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005.......Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005....

  5. Changing methodologies in TESOL

    CERN Document Server

    Spiro, Jane

    2013-01-01

    Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

  6. A Narrative in Search of a Methodology.

    Science.gov (United States)

    Treloar, Anna; Stone, Teresa Elizabeth; McMillan, Margaret; Flakus, Kirstin

    2015-07-01

    Research papers present us with the summaries of scholars' work; what we readers do not see are the struggles behind the decision to choose one methodology over another. A student's mental health portfolio contained a narrative that led to an exploration of the most appropriate methodology for a projected study of clinical anecdotes told by nurses who work in mental health settings to undergraduates and new recruits about mental health nursing. This paper describes the process of struggle, beginning with the student's account, before posing a number of questions needing answers before the choice of the most appropriate methodology. We argue, after discussing the case for the use of literary analysis, discourse analysis, symbolic interactionism, hermeneutics, and narrative research, that case study research is the methodology of choice. Case study is frequently used in educational research and is sufficiently flexible to allow for an exploration of the phenomenon. © 2014 Wiley Periodicals, Inc.

  7. Sprinkling: An Approach to Describe Urbanization Dynamics in Italy

    Directory of Open Access Journals (Sweden)

    Bernardino Romano

    2017-01-01

    Full Text Available This paper presents research which has defined a new typology of urban patterns (sprinkling, different from the internationally recognized standard urban sprawl, as well as various indicators that have been implemented to measure sprinkling. It is important to highlight that the damage caused to the environment and communities by urban sprinkling is much more serious and irreversible than that notoriously caused by urban sprawl. The paper introduces the difficult methodological and planning aspects of retrofitting (de-sprinkling, a true challenge for land management. We argue that even partial inversion of many negative effects is impossible in the short term. Only medium- to long-term, organized, and politically coordinated programs can tackle the various issues associated with sprinkling.

  8. Computer Network Operations Methodology

    Science.gov (United States)

    2004-03-01

    means of their computer information systems. Disrupt - This type of attack focuses on disrupting as “attackers might surreptitiously reprogram enemy...by reprogramming the computers that control distribution within the power grid. A disruption attack introduces disorder and inhibits the effective...between commanders. The use of methodologies is widespread and done subconsciously to assist individuals in decision making. The processes that

  9. SCI Hazard Report Methodology

    Science.gov (United States)

    Mitchell, Michael S.

    2010-01-01

    This slide presentation reviews the methodology in creating a Source Control Item (SCI) Hazard Report (HR). The SCI HR provides a system safety risk assessment for the following Ares I Upper Stage Production Contract (USPC) components (1) Pyro Separation Systems (2) Main Propulsion System (3) Reaction and Roll Control Systems (4) Thrust Vector Control System and (5) Ullage Settling Motor System components.

  10. A Functional HAZOP Methodology

    DEFF Research Database (Denmark)

    Liin, Netta; Lind, Morten; Jensen, Niels

    2010-01-01

    A HAZOP methodology is presented where a functional plant model assists in a goal oriented decomposition of the plant purpose into the means of achieving the purpose. This approach leads to nodes with simple functions from which the selection of process and deviation variables follow directly...

  11. Complicating Methodological Transparency

    Science.gov (United States)

    Bridges-Rhoads, Sarah; Van Cleave, Jessica; Hughes, Hilary E.

    2016-01-01

    A historical indicator of the quality, validity, and rigor of qualitative research has been the documentation and disclosure of the behind-the-scenes work of the researcher. In this paper, we use what we call "methodological data" as a tool to complicate the possibility and desirability of such transparency. Specifically, we draw on our…

  12. Methodological Advances in Dea

    NARCIS (Netherlands)

    L. Cherchye (Laurens); G.T. Post (Thierry)

    2001-01-01

    textabstractWe survey the methodological advances in DEA over the last 25 years and discuss the necessary conditions for a sound empirical application. We hope this survey will contribute to the further dissemination of DEA, the knowledge of its relative strengths and weaknesses, and the tools

  13. NUSAM Methodology for Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Leach, Janice [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Snell, Mark K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-07-01

    This document provides a methodology for the performance-based assessment of security systems designed for the protection of nuclear and radiological materials and the processes that produce and/or involve them. It is intended for use with both relatively simple installations and with highly regulated complex sites with demanding security requirements.

  14. MIRD methodology. Part 1

    International Nuclear Information System (INIS)

    Rojo, Ana M.

    2004-01-01

    This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

  15. Response Surface Methodology

    NARCIS (Netherlands)

    Kleijnen, Jack P.C.

    2014-01-01

    Abstract: This chapter first summarizes Response Surface Methodology (RSM), which started with Box and Wilson’s article in 1951 on RSM for real, non-simulated systems. RSM is a stepwise heuristic that uses first-order polynomials to approximate the response surface locally. An estimated polynomial

  16. MIRD methodology. Part 2

    International Nuclear Information System (INIS)

    Gomez Parada, Ines

    2004-01-01

    This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

  17. Turbulent Evolution of a Plasma Described Through Classical Mechanics Only

    International Nuclear Information System (INIS)

    Escande, D.F.; Elskens, Y.

    2003-01-01

    For the first time an old dream of the XIXth century comes true: the non trivial evolution of a macroscopic many-body system is described through classical mechanics only. This is done for the relaxation of a warm electron beam in a plasma, which results in the generation of Langmuir turbulence and in the formation of a plateau in the velocity distribution function of the electrons. Our derivation starts from the hamiltonian describing the one-dimensional N-body system corresponding to the beam and plasma bulk electrons in electrostatic interaction. For such a system, the dynamics can be reduced to the resonant interaction of M Langmuir waves with N'( > 1 Langmuir waves with N' >> 1 beam particles. This yields the proof of the classical quasilinear equations describing the coupled evolution of the wave spectrum and of the beam velocity distribution function in the strongly nonlinear regime where their validity is the matter of a longstanding controversy

  18. Quantum entropy of systems described by non-Hermitian Hamiltonians

    International Nuclear Information System (INIS)

    Sergi, Alessandro; Zloshchastiev, Konstantin G

    2016-01-01

    We study the quantum entropy of systems that are described by general non-Hermitian Hamiltonians, including those which can model the effects of sinks or sources. We generalize the von Neumann entropy to the non-Hermitian case and find that one needs both the normalized and non-normalized density operators in order to properly describe irreversible processes. It turns out that such a generalization monitors the onset of disorder in quantum dissipative systems. We give arguments for why one can consider the generalized entropy as the informational entropy describing the flow of information between the system and the bath. We illustrate the theory by explicitly studying few simple models, including tunneling systems with two energy levels and non-Hermitian detuning. (paper: quantum statistical physics, condensed matter, integrable systems)

  19. Correlation Factors Describing Primary and Spatial Sensations of Sound Fields

    Science.gov (United States)

    ANDO, Y.

    2002-11-01

    The theory of subjective preference of the sound field in a concert hall is established based on the model of human auditory-brain system. The model consists of the autocorrelation function (ACF) mechanism and the interaural crosscorrelation function (IACF) mechanism for signals arriving at two ear entrances, and the specialization of human cerebral hemispheres. This theory can be developed to describe primary sensations such as pitch or missing fundamental, loudness, timbre and, in addition, duration sensation which is introduced here as a fourth. These four primary sensations may be formulated by the temporal factors extracted from the ACF associated with the left hemisphere and, spatial sensations such as localization in the horizontal plane, apparent source width and subjective diffuseness are described by the spatial factors extracted from the IACF associated with the right hemisphere. Any important subjective responses of sound fields may be described by both temporal and spatial factors.

  20. Intelligence for education: as described by Piaget and measured by psychometrics.

    Science.gov (United States)

    Shayer, Michael

    2008-03-01

    Two separate paths to the concept of intelligence are discussed: the psychometric path being concerned with the measurement of intelligence, involving the methodology of norm-referenced testing; the path followed by Piaget, and others, addresses from the start the related question of how intelligence can be described, and employs a criterion-referenced methodology. The achievements of psychometrics are briefly described, with an argument that they now remain important tools of what Kuhn called 'normal science'. The criterion-referenced approach of Piaget and others is described, with evidence from intervention studies that the Genevan descriptions of children-in-action have allowed the choice of contexts within which children can profitably be challenged to go further in their thinking. Hence, Genevan psychology is also now a part of the normal science with important uses, shown both in neo-Piagetian studies and further research stemming from Geneva. Discussion of the 'Flynn effect' sheds light on both paths, with problems still unresolved. The argument is then developed that the relevance of neuroscience needs to be discussed to try to decide in what ways it may provide useful insights into intelligence.

  1. Algorithm describing pressure distribution of non-contact TNT explosion

    Directory of Open Access Journals (Sweden)

    Radosław Kiciński

    2014-12-01

    Full Text Available [b]Abstract[/b]. The aim of this study is to develop a computational algorithm, describing the shock wave pressure distribution in the space induced by non-contact TNT explosion. The procedure describes pressure distribution on a damp surface of the hull. Simulations have been carried out using Abaqus/CAE. The study also shows the pressure waveform descriptions provided by various authors and presents them in charts. The formulated conclusions convince efficiency of the algorithm application.[b]Keywords:[/b] Underwater explosion, shock wave, CAE, TNT, Kobben class submarine

  2. Use of conformal mapping to describe MHD wave propagation

    International Nuclear Information System (INIS)

    Bulanov, S.V.; Pegoraro, F.

    1993-01-01

    A method is proposed for finding explicit exact solutions of the magnetohydrodynamic equations describing the propagation of magnetoacoustic waves in a plasma in a magnetic potential that depends on two spatial coordinates. This method is based on the use of conformal mappings to transform the wave equation into an equation describing the propagation of waves in a uniform magnetic field. The basic properties of magnetoacoustic and Alfven waves near the critical points, magnetic separatrices, and in configuration with magnetic islands are discussed. Expressions are found for the dimensionless parameters which determine the relative roles of the plasma pressure, nonlinearity, and dissipation near the critical points. 30 refs

  3. High risk process control system assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Venetia [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zamberlan, Maria Cristina [National Institute of Tehnology (INT), Rio de Janeiro, RJ (Brazil). Human Reliability and Ergonomics Research Group for the Oil, Gas and Energy Sector

    2009-07-01

    The evolution of ergonomics methodology has become necessary due to the dynamics imposed by the work environment, by the increase of the need of human cooperation and by the high interaction between various sections within a company. In the last 25 years, as of studies made in the high risk process control, we have developed a methodology to evaluate these situations that focus on the assessment of activities and human cooperation, the assessment of context, the assessment of the impact of work of other sectors in the final activity of the operator, as well as the modeling of existing risks. (author)

  4. Development Methodology for an Integrated Legal Cadastre

    NARCIS (Netherlands)

    Hespanha, J.P.

    2012-01-01

    This Thesis describes the research process followed in order to achieve a development methodology applicable to the reform of cadastral systems with a legal basis. It was motivated by the author’s participation in one of the first surveying and mapping operations for a digital cadastre in Portugal,

  5. Theories, Models and Methodology in Writing Research

    NARCIS (Netherlands)

    Rijlaarsdam, Gert; Bergh, van den Huub; Couzijn, Michel

    1996-01-01

    Theories, Models and Methodology in Writing Research describes the current state of the art in research on written text production. The chapters in the first part offer contributions to the creation of new theories and models for writing processes. The second part examines specific elements of the

  6. Methodology for gathering nuclear energy literature

    International Nuclear Information System (INIS)

    Lambert, Maria B.M.A.

    1996-01-01

    Several activities related to gathering information and documents -conventional and non-conventional primary literature - to include in a bibliographic nuclear energy database are described and arranged, using as model the communication and information process in science and technology and the analysis of the indexed documents in the database. Methodological steps are identified and a collecting system model is presented. 112 refs., 4 tabs

  7. Superintendents Describe Their Leadership Styles: Implications for Practice

    Science.gov (United States)

    Bird, James J.; Wang, Chuang

    2013-01-01

    Superintendents from eight southeastern United States school districts self-described their leadership styles across the choices of autocratic, laissez-faire, democratic, situational, servant, or transformational. When faced with this array of choices, the superintendents chose with arguable equitableness, indicating that successful leaders can…

  8. Linear Plasma Oscillation Described by Superposition of Normal Modes

    DEFF Research Database (Denmark)

    Pécseli, Hans

    1974-01-01

    The existence of steady‐state solutions to the linearized ion and electron Vlasov equation is demonstrated for longitudinal waves in an initially stable plasma. The evolution of an arbitrary initial perturbation can be described by superposition of these solutions. Some common approximations...

  9. Tentative purely geometrical Machian framework for describing gravity and inertia

    Energy Technology Data Exchange (ETDEWEB)

    Goldoni, R [Pisa Univ. (Italy). Ist. di Matematica

    1979-03-03

    The purely geometrical Machian approach to gravitation presented in this letter improves an already published one. In any non vacuum cosmos the gravitational equations in gravitational units are identical to Einstein's equations, while the equations describing the gravitational field in local atomic units are integrodifferential equations in agreement with the available experimental data.

  10. Describing the Corneal Shape after Wavefront-Optimized Photorefractive Keratectomy

    NARCIS (Netherlands)

    de Jong, Tim; Wijdh, Robert H. J.; Koopmans, Steven A.; Jansonius, Nomdo M.

    2014-01-01

    PURPOSE: To develop a procedure for describing wavefront-optimized photorefractive keratectomy (PRK) corneas and to characterize PRK-induced changes in shape. METHODS: We analyzed preoperative and postoperative corneal elevation data of 41 eyes of 41 patients (mean [±SD] age, 38 [±11] years) who

  11. Describing Soils: Calibration Tool for Teaching Soil Rupture Resistance

    Science.gov (United States)

    Seybold, C. A.; Harms, D. S.; Grossman, R. B.

    2009-01-01

    Rupture resistance is a measure of the strength of a soil to withstand an applied stress or resist deformation. In soil survey, during routine soil descriptions, rupture resistance is described for each horizon or layer in the soil profile. The lower portion of the rupture resistance classes are assigned based on rupture between thumb and…

  12. Describing, Instantiating and Evaluating a Reference Architecture : A Case Study

    NARCIS (Netherlands)

    Avgeriou, Paris

    2003-01-01

    The result of a domain maturing is the emergence of reference architectures that offer numerous advantages to software architects and other stakeholders. However there is no straightforward way to describe a reference architecture and in sequence to design instances for specific systems, while at

  13. Deaf Autism: Common Instructional Practices Described by Deaf Educators

    Science.gov (United States)

    Rutledge, Felicia

    2017-01-01

    The purpose of this research study was to identify common instructional practices described by teachers of the deaf with students who are deaf with autism that increase both student engagement and instructional outcomes. As the diversity of students increase within deaf/hard of hearing programs, research is emerging in the area of deaf autism.…

  14. Nomenclature proposal to describe vocal fold motion impairment

    NARCIS (Netherlands)

    Rosen, Clark A.; Mau, Ted; Remacle, Marc; Hess, Markus; Eckel, Hans E.; Young, VyVy N.; Hantzakos, Anastasios; Yung, Katherine C.; Dikkers, Frederik G.

    2016-01-01

    The terms used to describe vocal fold motion impairment are confusing and not standardized. This results in a failure to communicate accurately and to major limitations of interpreting research studies involving vocal fold impairment. We propose standard nomenclature for reporting vocal fold

  15. Nomenclature proposal to describe vocal fold motion impairment

    NARCIS (Netherlands)

    Rosen, Clark A.; Mau, Ted; Remacle, Marc; Hess, Markus; Eckel, Hans E.; Young, VyVy N.; Hantzakos, Anastasios; Yung, Katherine C.; Dikkers, Frederik G.

    The terms used to describe vocal fold motion impairment are confusing and not standardized. This results in a failure to communicate accurately and to major limitations of interpreting research studies involving vocal fold impairment. We propose standard nomenclature for reporting vocal fold

  16. First described case of prosthetic joint infection with Clostridium disporicum.

    Science.gov (United States)

    McBride, Joseph A; Sterkel, Alana K; Rehrauer, William M; Smith, Jeannina A

    2017-12-01

    An orthopedic hardware infection with Clostridium disporicum is described. C. disporicum is a gram positive anaerobic bacillus which can contain two subterminal spores. C. disporicum had not previously been reported in musculoskeletal infections. Gram stains demonstrating gram positive bacilli with two subterminal spores should alert practitioners to the possibility of C. disporicum infection. Published by Elsevier Ltd.

  17. Performance of density functional theory methods to describe ...

    Indian Academy of Sciences (India)

    Fukui function shows a small dependence with both the exchange and correlation functional and the basis set. Evolution of the Fukui function along the reaction path describes important changes in the basic sites of the corresponding molecules. These results are in agreement with the chemical behavior of those species.

  18. 15 CFR 930.98 - Federally assisted activities outside of the coastal zone or the described geographic area.

    Science.gov (United States)

    2010-01-01

    ... of the coastal zone or the described geographic area. 930.98 Section 930.98 Commerce and Foreign... Federally assisted activities outside of the coastal zone or the described geographic area. State agencies should monitor proposed federal assistance activities outside of the coastal zone or the described...

  19. Methodology of Credit Analysis Development

    Directory of Open Access Journals (Sweden)

    Slađana Neogradi

    2017-12-01

    Full Text Available The subject of research presented in this paper refers to the definition of methodology for the development of credit analysis in companies and its application in lending operations in the Republic of Serbia. With the developing credit market, there is a growing need for a well-developed risk and loss prevention system. In the introduction the process of bank analysis of the loan applicant is presented in order to minimize and manage the credit risk. By examining the subject matter, the process of processing the credit application is described, the procedure of analyzing the financial statements in order to get an insight into the borrower's creditworthiness. In the second part of the paper, the theoretical and methodological framework is presented applied in the concrete company. In the third part, models are presented which banks should use to protect against exposure to risks, i.e. their goal is to reduce losses on loan operations in our country, as well as to adjust to market conditions in an optimal way.

  20. New constitutive equations to describe infinitesimal elastic-plastic deformations

    International Nuclear Information System (INIS)

    Boecke, B.; Link, F.; Schneider, G.; Bruhns, O.T.

    1983-01-01

    A set of constitutive equations is presented to describe infinitesimal elastic-plastic deformations of austenitic steel in the range up to 600 deg C. This model can describe the hardening behaviour in the case of mechanical loading and hardening, and softening behaviour in the case of thermal loading. The loading path can be either monotonic or cyclic. For this purpose, the well-known isotropic hardening model is continually transferred into the kinematic model according to Prager, whereby suitable internal variables are chosen. The occurring process-dependent material functions are to be determined by uniaxial experiments. The hardening function g and the translation function c are determined by means of a linearized stress-strain behaviour in the plastic range, whereby a coupling condition must be taken into account. As a linear hardening process is considered to be too unrealistic, nonlinearity is achieved by introducing a small function w, the determination procedure of which is given. (author)

  1. National survey describing and quantifying students with communication needs.

    Science.gov (United States)

    Andzik, Natalie R; Schaefer, John M; Nichols, Robert T; Chung, Yun-Ching

    2018-01-01

    Research literature has yet to quantify and describe how students with complex communication needs are supported in the classroom and how special educators are being prepared to offer support. This study sought out special educators to complete a survey about their students with complex communication needs. Over 4,000 teachers representing 50 states reported on the communicative and behavioral characteristics of 15,643 students. Teachers described the training they have received and instructional approaches they used. The majority of students were reported to use speech as their primary communication mode. Over half of students utilizing alternative and augmentative communication (AAC) were reported to have non-proficient communication. Teacher training varied across respondents as well as the supports they used to support these students in the classroom. The majority of students with disabilities using AAC when communicating across the nation are not proficiently communicating. Implications and recommendations will be discussed.

  2. Statistical models describing the energy signature of buildings

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Thavlov, Anders

    2010-01-01

    Approximately one third of the primary energy production in Denmark is used for heating in buildings. Therefore efforts to accurately describe and improve energy performance of the building mass are very important. For this purpose statistical models describing the energy signature of a building, i...... or varying energy prices. The paper will give an overview of statistical methods and applied models based on experiments carried out in FlexHouse, which is an experimental building in SYSLAB, Risø DTU. The models are of different complexity and can provide estimates of physical quantities such as UA......-values, time constants of the building, and other parameters related to the heat dynamics. A method for selecting the most appropriate model for a given building is outlined and finally a perspective of the applications is given. Aknowledgements to the Danish Energy Saving Trust and the Interreg IV ``Vind i...

  3. Recently described clinically important anaerobic bacteria: medical aspects.

    Science.gov (United States)

    Finegold, S M; Jousimies-Somer, H

    1997-09-01

    There is still inadequate information on the role of certain newly described or reclassified anaerobes in disease processes, on their normal sites of carriage, and on their antimicrobial susceptibilities. Herein, we summarize this information (most of the literature reviewed is from the past 5 years, but a few of the articles are approximately 10 years old). Porphyromonas species had seemed to be relatively nonpathogenic, but recent work indicates that this belief is incorrect. P. gingivalis, P levii-like organisms, and P. endodontalis-like organisms have been recovered from a variety of oral and extraoral infections. P. macacae has been recovered from infected cat bite wounds. Sutterella wadsworthensis, recently differentiated from Campylobacter gracilis, has been found in a variety of infections. Bilophila wadsworthia has also been recovered from a wide variety of infections. Newly described anaerobic cocci, gram-positive nonsporeforming rods, and clostridia have also been isolated from various infections.

  4. The scentscape: An integrative framework describing scents in servicescapes

    OpenAIRE

    Girard, Marc; Girard, Anna; Suppin, Anna-Caroline; Bartsch, Silke

    2016-01-01

    The systematic use of ambient scents is a trend in service companies that is accompanied by increasing research attention. However, we lack a theoretical framework that ad-dresses ambient scents' specific role in physical surroundings of services. Thus, this article develops the 'scentscape', a model that describes the process of olfactory stimulation and its impacts on customers and employees in service environments. The paper extends Bitner's servicescape model (1992) and combines it with G...

  5. A relation to describe rate-dependent material failure.

    Science.gov (United States)

    Voight, B

    1989-01-13

    The simple relation OmegaOmega-alpha = 0, where Omega is a measurable quantity such as strain and A and alpha are empirical constants, describes the behavior of materials in terminal stages of failure under conditions of approximately constant stress and temperature. Applicable to metals and alloys, ice, concrete, polymers, rock, and soil, the relation may be extended to conditions of variable and multiaxial stress and may be used to predict time to failure.

  6. Transparent Guideline Methodology Needed

    DEFF Research Database (Denmark)

    Lidal, Ingeborg; Norén, Camilla; Mäkelä, Marjukka

    2013-01-01

    As part of learning at the Nordic Workshop of Evidence-based Medicine, we have read with interest the practice guidelines for central venous access, published in your Journal in 2012.1 We appraised the quality of this guideline using the checklist developed by The Evidence-Based Medicine Working ...... are based on best currently available evidence. Our concerns are in two main categories: the rigor of development, including methodology of searching, evaluating, and combining the evidence; and editorial independence, including funding and possible conflicts of interest....... Group.2 Similar criteria for guideline quality have been suggested elsewhere.3 Our conclusion was that this much needed guideline is currently unclear about several aspects of the methodology used in developing the recommendations. This means potential users cannot be certain that the recommendations...

  7. Web survey methodology

    CERN Document Server

    Callegaro, Mario; Vehovar, Asja

    2015-01-01

    Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

  8. Steganography: LSB Methodology

    Science.gov (United States)

    2012-08-02

    of LSB steganography in grayscale and color images . In J. Dittmann, K. Nahrstedt, and P. Wohlmacher, editors, Proceedings of the ACM, Special...Fridrich, M. Gojan and R. Du paper titled “Reliable detection of LSB steganography in grayscale and color images ”. From a general perspective Figure 2...REPORT Steganography : LSB Methodology (Progress Report) 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: In computer science, steganography is the science

  9. HERMES: A Model to Describe Deformation, Burning, Explosion, and Detonation

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2011-11-22

    HERMES (High Explosive Response to MEchanical Stimulus) was developed to fill the need for a model to describe an explosive response of the type described as BVR (Burn to Violent Response) or HEVR (High Explosive Violent Response). Characteristically this response leaves a substantial amount of explosive unconsumed, the time to reaction is long, and the peak pressure developed is low. In contrast, detonations characteristically consume all explosive present, the time to reaction is short, and peak pressures are high. However, most of the previous models to describe explosive response were models for detonation. The earliest models to describe the response of explosives to mechanical stimulus in computer simulations were applied to intentional detonation (performance) of nearly ideal explosives. In this case, an ideal explosive is one with a vanishingly small reaction zone. A detonation is supersonic with respect to the undetonated explosive (reactant). The reactant cannot respond to the pressure of the detonation before the detonation front arrives, so the precise compressibility of the reactant does not matter. Further, the mesh sizes that were practical for the computer resources then available were large with respect to the reaction zone. As a result, methods then used to model detonations, known as {beta}-burn or program burn, were not intended to resolve the structure of the reaction zone. Instead, these methods spread the detonation front over a few finite-difference zones, in the same spirit that artificial viscosity is used to spread the shock front in inert materials over a few finite-difference zones. These methods are still widely used when the structure of the reaction zone and the build-up to detonation are unimportant. Later detonation models resolved the reaction zone. These models were applied both to performance, particularly as it is affected by the size of the charge, and to situations in which the stimulus was less than that needed for reliable

  10. Comparison Of Irms Delhi Methodology With Who Methodology On Immunization Coverage

    Directory of Open Access Journals (Sweden)

    Singh Padam

    1996-01-01

    Full Text Available Research question: What are the merits of IRMS Model over WHO Model for Coverage Evaluation Survey? Which method is superior and appropriate for coverage evolution survey of immunization in our setting? Objective: To compare IRMS Delhi methodology with WHO methodology on Immunization Coverage. Study Design: Cross-Sectional Setting: Urban and Rural both. Participants: Mothers& Children Sample Size: 300 children between 1-2 years and 300 mothers in rural areas and 75 children and 75 mothers in urban areas. Study Variables: Rural, Urban, Cast-Group, Size of the stratum, Literacy, Sex and Cost effectiveness. Outcome Variables: Coverage level of immunization. Analysis: Routine Statistical Analysis. Results: IRMS developed methodology scores better rating over WHO methodology, especially when coverage evolution is attempted in medium size villages with existence of socio-economic seggregation-which remains the main characteristic of the Indian villages.

  11. FRACTAL ANALYSIS OF TRABECULAR BONE: A STANDARDISED METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Ian Parkinson

    2011-05-01

    Full Text Available A standardised methodology for the fractal analysis of histological sections of trabecular bone has been established. A modified box counting method has been developed for use on a PC based image analyser (Quantimet 500MC, Leica Cambridge. The effect of image analyser settings, magnification, image orientation and threshold levels, was determined. Also, the range of scale over which trabecular bone is effectively fractal was determined and a method formulated to objectively calculate more than one fractal dimension from the modified Richardson plot. The results show that magnification, image orientation and threshold settings have little effect on the estimate of fractal dimension. Trabecular bone has a lower limit below which it is not fractal (λ<25 μm and the upper limit is 4250 μm. There are three distinct fractal dimensions for trabecular bone (sectional fractals, with magnitudes greater than 1.0 and less than 2.0. It has been shown that trabecular bone is effectively fractal over a defined range of scale. Also, within this range, there is more than 1 fractal dimension, describing spatial structural entities. Fractal analysis is a model independent method for describing a complex multifaceted structure, which can be adapted for the study of other biological systems. This may be at the cell, tissue or organ level and compliments conventional histomorphometric and stereological techniques.

  12. Find-rate methodology and resource base estimates of the Hydrocarbon Supply Model (1990 update). Topical report

    International Nuclear Information System (INIS)

    Woods, T.

    1991-02-01

    The Hydrocarbon Supply Model is used to develop long-term trends in Lower-48 gas production and costs. The model utilizes historical find-rate patterns to predict the discovery rate and size distribution of future oil and gas field discoveries. The report documents the methodologies used to quantify historical oil and gas field find-rates and to project those discovery patterns for future drilling. It also explains the theoretical foundations for the find-rate approach. The new field and reserve growth resource base is documented and compared to other published estimates. The report has six sections. Section 1 provides background information and an overview of the model. Sections 2, 3, and 4 describe the theoretical foundations of the model, the databases, and specific techniques used. Section 5 presents the new field resource base by region and depth. Section 6 documents the reserve growth model components

  13. Analytical simulation platform describing projections in computed tomography systems

    International Nuclear Information System (INIS)

    Youn, Hanbean; Kim, Ho Kyung

    2013-01-01

    To reduce the patient dose, several approaches such as spectral imaging using photon counting detectors and statistical image reconstruction, are being considered. Although image-reconstruction algorithms may significantly enhance image quality in reconstructed images with low dose, true signal-to-noise properties are mainly determined by image quality in projections. We are developing an analytical simulation platform describing projections to investigate how quantum-interaction physics in each component configuring CT systems affect image quality in projections. This simulator will be very useful for an improved design or optimization of CT systems in economy as well as the development of novel image-reconstruction algorithms. In this study, we present the progress of development of the simulation platform with an emphasis on the theoretical framework describing the generation of projection data. We have prepared the analytical simulation platform describing projections in computed tomography systems. The remained further study before the meeting includes the following: Each stage in the cascaded signal-transfer model for obtaining projections will be validated by the Monte Carlo simulations. We will build up energy-dependent scatter and pixel-crosstalk kernels, and show their effects on image quality in projections and reconstructed images. We will investigate the effects of projections obtained from various imaging conditions and system (or detector) operation parameters on reconstructed images. It is challenging to include the interaction physics due to photon-counting detectors into the simulation platform. Detailed descriptions of the simulator will be presented with discussions on its performance and limitation as well as Monte Carlo validations. Computational cost will also be addressed in detail. The proposed method in this study is simple and can be used conveniently in lab environment

  14. Methodology for performing measurements to release material from radiological control

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1993-09-01

    This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described

  15. A model to describe the performance of the UASB reactor.

    Science.gov (United States)

    Rodríguez-Gómez, Raúl; Renman, Gunno; Moreno, Luis; Liu, Longcheng

    2014-04-01

    A dynamic model to describe the performance of the Upflow Anaerobic Sludge Blanket (UASB) reactor was developed. It includes dispersion, advection, and reaction terms, as well as the resistances through which the substrate passes before its biotransformation. The UASB reactor is viewed as several continuous stirred tank reactors connected in series. The good agreement between experimental and simulated results shows that the model is able to predict the performance of the UASB reactor (i.e. substrate concentration, biomass concentration, granule size, and height of the sludge bed).

  16. Icosahedral symmetry described by an incommensurately modulated crystal structure model

    DEFF Research Database (Denmark)

    Wolny, Janusz; Lebech, Bente

    1986-01-01

    A crystal structure model of an incommensurately modulated structure is presented. Although six different reciprocal vectors are used to describe the model, all calculations are done in three dimensions making calculation of the real-space structure trivial. Using this model, it is shown that both...... the positions of the bragg reflections and information about the relative intensities of these reflections are in full accordance with the diffraction patterns reported for microcrystals of the rapidly quenched Al86Mn14 alloy. It is also shown that at least the local structure possesses full icosahedral...

  17. [Health consequences of smoking electronic cigarettes are poorly described].

    Science.gov (United States)

    Tøttenborg, Sandra Søgaard; Holm, Astrid Ledgaard; Wibholm, Niels Christoffer; Lange, Peter

    2014-09-01

    Despite increasing popularity, health consequences of vaping (smoking electronic cigarettes, e-cigarettes) are poorly described. Few studies suggest that vaping has less deleterious effects on lung function than smoking conventional cigarettes. One large study found that e-cigarettes were as efficient as nicotine patches in smoking cessation. The long-term consequences of vaping are however unknown and while some experts are open towards e-cigarettes as a safer way of satisfying nicotine addiction, others worry that vaping in addition to presenting a health hazard may lead to an increased number of smokers of conventional cigarettes.

  18. Two heuristic approaches to describe periodicities in genomic microarrays

    Directory of Open Access Journals (Sweden)

    Jörg Aßmus

    2009-09-01

    Full Text Available In the first part we discuss the filtering of panels of time series based on singular value decomposition. The discussion is based on an approach where this filtering is used to normalize microarray data. We point out effects on the periodicity and phases for time series panels. In the second part we investigate time dependent periodic panels with different phases. We align the time series in the panel and discuss the periodogram of the aligned time series with the purpose of describing the periodic structure of the panel. The method is quite powerful assuming known phases in the model, but it deteriorates rapidly for noisy data.  

  19. A Model Describing Stable Coherent Synchrotron Radiation in Storage Rings

    International Nuclear Information System (INIS)

    Sannibale, F.

    2004-01-01

    We present a model describing high power stable broadband coherent synchrotron radiation (CSR) in the terahertz frequency region in an electron storage ring. The model includes distortion of bunch shape from the synchrotron radiation (SR), which enhances higher frequency coherent emission, and limits to stable emission due to an instability excited by the SR wakefield. It gives a quantitative explanation of several features of the recent observations of CSR at the BESSY II storage ring. We also use this model to optimize the performance of a source for stable CSR emission

  20. A model describing stable coherent synchrotron radiation in storage rings

    International Nuclear Information System (INIS)

    Sannibale, F.; Byrd, J.M.; Loftsdottir, A.; Venturini, M.; Abo-Bakr, M.; Feikes, J.; Holldack, K.; Kuske, P.; Wuestefeld, G.; Huebers, H.-W.; Warnock, R.

    2004-01-01

    We present a model describing high power stable broadband coherent synchrotron radiation (CSR) in the terahertz frequency region in an electron storage ring. The model includes distortion of bunch shape from the synchrotron radiation (SR), which enhances higher frequency coherent emission, and limits to stable emission due to an instability excited by the SR wakefield. It gives a quantitative explanation of several features of the recent observations of CSR at the BESSY II storage ring. We also use this model to optimize the performance of a source for stable CSR emission

  1. Universal Spatial Correlation Functions for Describing and Reconstructing Soil Microstructure

    Science.gov (United States)

    Skvortsova, Elena B.; Mallants, Dirk

    2015-01-01

    Structural features of porous materials such as soil define the majority of its physical properties, including water infiltration and redistribution, multi-phase flow (e.g. simultaneous water/air flow, or gas exchange between biologically active soil root zone and atmosphere) and solute transport. To characterize soil microstructure, conventional soil science uses such metrics as pore size and pore-size distributions and thin section-derived morphological indicators. However, these descriptors provide only limited amount of information about the complex arrangement of soil structure and have limited capability to reconstruct structural features or predict physical properties. We introduce three different spatial correlation functions as a comprehensive tool to characterize soil microstructure: 1) two-point probability functions, 2) linear functions, and 3) two-point cluster functions. This novel approach was tested on thin-sections (2.21×2.21 cm2) representing eight soils with different pore space configurations. The two-point probability and linear correlation functions were subsequently used as a part of simulated annealing optimization procedures to reconstruct soil structure. Comparison of original and reconstructed images was based on morphological characteristics, cluster correlation functions, total number of pores and pore-size distribution. Results showed excellent agreement for soils with isolated pores, but relatively poor correspondence for soils exhibiting dual-porosity features (i.e. superposition of pores and micro-cracks). Insufficient information content in the correlation function sets used for reconstruction may have contributed to the observed discrepancies. Improved reconstructions may be obtained by adding cluster and other correlation functions into reconstruction sets. Correlation functions and the associated stochastic reconstruction algorithms introduced here are universally applicable in soil science, such as for soil classification

  2. Application of Agent Methodology in Healthcare Information Systems

    Directory of Open Access Journals (Sweden)

    Reem Abdalla

    2017-02-01

    Full Text Available This paper presents a case study to describe the features and the phases of the two agent methodologies. The Gaia methodology for agent oriented analysis and design, Tropos is a detailed agent oriented software engineering methodology to explore each methodology's ability to present solutions for small problems. Also we provide an attempt to discover whether the methodology is in fact understandable and usable. In addition we were collecting and taking notes of the advantages and weaknesses of these methodologies during the study analysis for each methodology and the relationships among their models. The Guardian Angle: Patient-Centered Health Information System (GA: PCHIS is the personal system to help track, manage, and interpret the subject's health history, and give advice to both patient and provider is used as the case study throughout the paper.

  3. Health economic assessment: a methodological primer.

    Science.gov (United States)

    Simoens, Steven

    2009-12-01

    This review article aims to provide an introduction to the methodology of health economic assessment of a health technology. Attention is paid to defining the fundamental concepts and terms that are relevant to health economic assessments. The article describes the methodology underlying a cost study (identification, measurement and valuation of resource use, calculation of costs), an economic evaluation (type of economic evaluation, the cost-effectiveness plane, trial- and model-based economic evaluation, discounting, sensitivity analysis, incremental analysis), and a budget impact analysis. Key references are provided for those readers who wish a more advanced understanding of health economic assessments.

  4. Health Economic Assessment: A Methodological Primer

    Directory of Open Access Journals (Sweden)

    Steven Simoens

    2009-11-01

    Full Text Available This review article aims to provide an introduction to the methodology of health economic assessment of a health technology. Attention is paid to defining the fundamental concepts and terms that are relevant to health economic assessments. The article describes the methodology underlying a cost study (identification, measurement and valuation of resource use, calculation of costs, an economic evaluation (type of economic evaluation, the cost-effectiveness plane, trial- and model-based economic evaluation, discounting, sensitivity analysis, incremental analysis, and a budget impact analysis. Key references are provided for those readers who wish a more advanced understanding of health economic assessments.

  5. CATHARE code development and assessment methodologies

    International Nuclear Information System (INIS)

    Micaelli, J.C.; Barre, F.; Bestion, D.

    1995-01-01

    The CATHARE thermal-hydraulic code has been developed jointly by Commissariat a l'Energie Atomique (CEA), Electricite de France (EdF), and Framatorne for safety analysis. Since the beginning of the project (September 1979), development and assessment activities have followed a methodology supported by two series of experimental tests: separate effects tests and integral effects tests. The purpose of this paper is to describe this methodology, the code assessment status, and the evolution to take into account two new components of this program: the modeling of three-dimensional phenomena and the requirements of code uncertainty evaluation

  6. Intersystem LOCA risk assessment: methodology and results

    International Nuclear Information System (INIS)

    Galyean, W.J.; Kelly, D.L.; Schroeder, J.A.; Auflick, L.J.; Blackman, H.S.; Gertman, D.I.; Hanley, L.N.

    1994-01-01

    The United States Nuclear Regulatory Commission is sponsoring a research program to develop an improved understanding of the human factors, hardware and accident consequence issues that dominate the risk from an intersystem loss-of-coolant accident (ISLOCA) at a nuclear power plant. To accomplish the goals of this program, a mehtodology has been developed for estimating ISLOCA core damage frequency and risk. The steps in this methodology are briefly described, along with the results obtained from an application of the methodology at three pressurized water reactors. Also included are the results of a screening study of boiling water reactors. ((orig.))

  7. Risk-based methodology for USNRC inspections

    International Nuclear Information System (INIS)

    Wong, S.M.; Holahan, G.M.; Chung, J.W.; Johnson, M.R.

    1995-01-01

    This paper describes the development and trial applications of a risk-based methodology to enhance the inspection processes for US nuclear power plants. Objectives of risk-based methods to complement prescriptive engineering approaches in US Nuclear Regulatory Commission (USNRC) inspection programs are presented. Insights from time-dependent risk profiles of plant configurational from Individual Plant Evaluation (IPE) studies were integrated to develop a framework for optimizing inspection efforts in NRC regulatory initiatives. Lessons learned from NRC pilot applications of the risk-based methodology for evaluation of the effectiveness of operational risk management programs at US nuclear power plant sites are also discussed

  8. Methodology for generating waste volume estimates

    International Nuclear Information System (INIS)

    Miller, J.Q.; Hale, T.; Miller, D.

    1991-09-01

    This document describes the methodology that will be used to calculate waste volume estimates for site characterization and remedial design/remedial action activities at each of the DOE Field Office, Oak Ridge (DOE-OR) facilities. This standardized methodology is designed to ensure consistency in waste estimating across the various sites and organizations that are involved in environmental restoration activities. The criteria and assumptions that are provided for generating these waste estimates will be implemented across all DOE-OR facilities and are subject to change based on comments received and actual waste volumes measured during future sampling and remediation activities. 7 figs., 8 tabs

  9. Resonance Self-Shielding Methodologies in SCALE 6

    International Nuclear Information System (INIS)

    Williams, Mark L.

    2011-01-01

    SCALE 6 includes several problem-independent multigroup (MG) libraries that were processed from the evaluated nuclear data file ENDF/B using a generic flux spectrum. The library data must be self-shielded and corrected for problem-specific spectral effects for use in MG neutron transport calculations. SCALE 6 computes problem-dependent MG cross sections through a combination of the conventional Bondarenko shielding-factor method and a deterministic continuous-energy (CE) calculation of the fine-structure spectra in the resolved resonance and thermal energy ranges. The CE calculation can be performed using an infinite medium approximation, a simplified two-region method for lattices, or a one-dimensional discrete ordinates transport calculation with pointwise (PW) cross-section data. This paper describes the SCALE-resonance self-shielding methodologies, including the deterministic calculation of the CE flux spectra using PW nuclear data and the method for using CE spectra to produce problem-specific MG cross sections for various configurations (including doubly heterogeneous lattices). It also presents results of verification and validation studies.

  10. A Rigorous Methodology for Analyzing and Designing Plug-Ins

    DEFF Research Database (Denmark)

    Fasie, Marieta V.; Haxthausen, Anne Elisabeth; Kiniry, Joseph

    2013-01-01

    . This paper addresses these problems by describing a rigorous methodology for analyzing and designing plug-ins. The methodology is grounded in the Extended Business Object Notation (EBON) and covers informal analysis and design of features, GUI, actions, and scenarios, formal architecture design, including...... behavioral semantics, and validation. The methodology is illustrated via a case study whose focus is an Eclipse environment for the RAISE formal method's tool suite....

  11. Colour in flux: describing and printing colour in art

    Science.gov (United States)

    Parraman, Carinna

    2008-01-01

    This presentation will describe artists, practitioners and scientists, who were interested in developing a deeper psychological, emotional and practical understanding of the human visual system who were working with wavelength, paint and other materials. From a selection of prints at The Prints and Drawings Department at Tate London, the presentation will refer to artists who were motivated by issues relating to how colour pigment was mixed and printed, to interrogate and explain colour perception and colour science, and in art, how artists have used colour to challenge the viewer and how a viewer might describe their experience of colour. The title Colour in Flux refers, not only to the perceptual effect of the juxtaposition of one colour pigment with another, but also to the changes and challenges for the print industry. In the light of screenprinted examples from the 60s and 70s, the presentation will discuss 21 st century ideas on colour and how these notions have informed the Centre for Fine Print Research's (CFPR) practical research in colour printing. The latter part of this presentation will discuss the implications for the need to change methods in mixing inks that moves away from existing colour spaces, from non intuitive colour mixing to bespoke ink sets, colour mixing approaches and colour mixing methods that are not reliant on RGB or CMYK.

  12. A Kinetic Model Describing Injury-Burden in Team Sports.

    Science.gov (United States)

    Fuller, Colin W

    2017-12-01

    Injuries in team sports are normally characterised by the incidence, severity, and location and type of injuries sustained: these measures, however, do not provide an insight into the variable injury-burden experienced during a season. Injury burden varies according to the team's match and training loads, the rate at which injuries are sustained and the time taken for these injuries to resolve. At the present time, this time-based variation of injury burden has not been modelled. To develop a kinetic model describing the time-based injury burden experienced by teams in elite team sports and to demonstrate the model's utility. Rates of injury were quantified using a large eight-season database of rugby injuries (5253) and exposure (60,085 player-match-hours) in English professional rugby. Rates of recovery from injury were quantified using time-to-recovery analysis of the injuries. The kinetic model proposed for predicting a team's time-based injury burden is based on a composite rate equation developed from the incidence of injury, a first-order rate of recovery from injury and the team's playing load. The utility of the model was demonstrated by examining common scenarios encountered in elite rugby. The kinetic model developed describes and predicts the variable injury-burden arising from match play during a season of rugby union based on the incidence of match injuries, the rate of recovery from injury and the playing load. The model is equally applicable to other team sports and other scenarios.

  13. Limitations of Poisson statistics in describing radioactive decay.

    Science.gov (United States)

    Sitek, Arkadiusz; Celler, Anna M

    2015-12-01

    The assumption that nuclear decays are governed by Poisson statistics is an approximation. This approximation becomes unjustified when data acquisition times longer than or even comparable with the half-lives of the radioisotope in the sample are considered. In this work, the limits of the Poisson-statistics approximation are investigated. The formalism for the statistics of radioactive decay based on binomial distribution is derived. The theoretical factor describing the deviation of variance of the number of decays predicated by the Poisson distribution from the true variance is defined and investigated for several commonly used radiotracers such as (18)F, (15)O, (82)Rb, (13)N, (99m)Tc, (123)I, and (201)Tl. The variance of the number of decays estimated using the Poisson distribution is significantly different than the true variance for a 5-minute observation time of (11)C, (15)O, (13)N, and (82)Rb. Durations of nuclear medicine studies often are relatively long; they may be even a few times longer than the half-lives of some short-lived radiotracers. Our study shows that in such situations the Poisson statistics is unsuitable and should not be applied to describe the statistics of the number of decays in radioactive samples. However, the above statement does not directly apply to counting statistics at the level of event detection. Low sensitivities of detectors which are used in imaging studies make the Poisson approximation near perfect. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  14. Experimental investigation of statistical models describing distribution of counts

    International Nuclear Information System (INIS)

    Salma, I.; Zemplen-Papp, E.

    1992-01-01

    The binomial, Poisson and modified Poisson models which are used for describing the statistical nature of the distribution of counts are compared theoretically, and conclusions for application are considered. The validity of the Poisson and the modified Poisson statistical distribution for observing k events in a short time interval is investigated experimentally for various measuring times. The experiments to measure the influence of the significant radioactive decay were performed with 89 Y m (T 1/2 =16.06 s), using a multichannel analyser (4096 channels) in the multiscaling mode. According to the results, Poisson statistics describe the counting experiment for short measuring times (up to T=0.5T 1/2 ) and its application is recommended. However, analysis of the data demonstrated, with confidence, that for long measurements (T≥T 1/2 ) Poisson distribution is not valid and the modified Poisson function is preferable. The practical implications in calculating uncertainties and in optimizing the measuring time are discussed. Differences between the standard deviations evaluated on the basis of the Poisson and binomial models are especially significant for experiments with long measuring time (T/T 1/2 ≥2) and/or large detection efficiency (ε>0.30). Optimization of the measuring time for paired observations yields the same solution for either the binomial or the Poisson distribution. (orig.)

  15. Workplace culture in psychiatric nursing described by nurses.

    Science.gov (United States)

    Kurjenluoma, K; Rantanen, A; McCormack, B; Slater, P; Hahtela, N; Suominen, T

    2017-12-01

    This study looks to describe the workplace culture from the viewpoints of stress, job satisfaction and practice environment. Data were collected from nurses (n = 109) using a web-based survey, The Person-Centred Nursing Index, from two purposefully selected hospital districts in Finland. Data were statistically analysed. Nurses described their workplace culture in slightly positive terms. Nurses only occasionally experienced stress (mean = 2.56, SD = 0.55) and were fairly satisfied with their job (mean = 4.75, SD = 0.66) and their practice environment (mean = 4.42, SD = 0.81). Demographic variables such as the nurses' age, length of time in nursing, time at their present hospital, working shifts and their use of patient restriction were more frequently associated with their perceived workplace culture. Older nurses and those with a longer work history in the nursing profession tended to be more satisfied with their workplace culture in psychiatric nursing. Young and/or newly graduated nurses felt more negatively on their workplace culture; this issue should be recognised and addressed with appropriate support and mentoring. Nurses who used restrictive measures were more often less satisfied with their workplace culture. Continuous efforts are needed to reduce the use of coercive measures, which challenge also the managers to support nursing practice to be more person-centred. © 2017 Nordic College of Caring Science.

  16. Describing the Peptide Binding Specificity of HLA-C

    DEFF Research Database (Denmark)

    Rasmussen, Michael; Harndahl, Mikkel Nors; Nielsen, Morten

    for 5 HLA-C molecules and for all, but one, molecule we find a high frequency of binders, >70%, among these peptides. To extend the examined peptide space, we use bioinformatic prediction tools to search for additional binders. Finally, we update our prediction tool, NetMHCpan, with the HLA-C affinity......Human leukocyte antigen (HLA) presents peptides to T-cells for immune scrutiny. Whereas HLA-A and -B have been described in great detail, HLA-C has received much less attention. Here, to increase the coverage of HLA-C and the accuracy of the corresponding tools, we have generated HLA-C molecules...... data and show that the predictive performance for HLA-C molecules now is increased to a level comparable withthat of HLA-A and -B. These novel HLA-C molecules and predictors are successfully used to generate HLA-C tetramers and validate HLA-C-restricted T cell responses....

  17. Describing Quadratic Cremer Point Polynomials by Parabolic Perturbations

    DEFF Research Database (Denmark)

    Sørensen, Dan Erik Krarup

    1996-01-01

    We describe two infinite order parabolic perturbation proceduresyielding quadratic polynomials having a Cremer fixed point. The main ideais to obtain the polynomial as the limit of repeated parabolic perturbations.The basic tool at each step is to control the behaviour of certain externalrays.......Polynomials of the Cremer type correspond to parameters at the boundary of ahyperbolic component of the Mandelbrot set. In this paper we concentrate onthe main cardioid component. We investigate the differences between two-sided(i.e. alternating) and one-sided parabolic perturbations.In the two-sided case, we prove...... the existence of polynomials having an explicitlygiven external ray accumulating both at the Cremer point and at its non-periodicpreimage. We think of the Julia set as containing a "topologists double comb".In the one-sided case we prove a weaker result: the existence of polynomials havingan explicitly given...

  18. Models for describing the thermal characteristics of building components

    DEFF Research Database (Denmark)

    Jimenez, M.J.; Madsen, Henrik

    2008-01-01

    , for example. For the analysis of these tests, dynamic analysis models and methods are required. However, a wide variety of models and methods exists, and the problem of choosing the most appropriate approach for each particular case is a non-trivial and interdisciplinary task. Knowledge of a large family....... The characteristics of each type of model are highlighted. Some available software tools for each of the methods described will be mentioned. A case study also demonstrating the difference between linear and nonlinear models is considered....... of these approaches may therefore be very useful for selecting a suitable approach for each particular case. This paper presents an overview of models that can be applied for modelling the thermal characteristics of buildings and building components using data from outdoor testing. The choice of approach depends...

  19. Can the "standard" unitarized Regge models describe the TOTEM data?

    CERN Document Server

    Alkin, A; Martynov, E

    2013-01-01

    The standard Regge poles are considered as inputs for two unitarization methods: eikonal and U-matrix. It is shown that only models with three input pomerons and two input odderons can describe the high energy data on $pp$ and $\\bar pp$ elastic scattering including the new data from Tevatron and LHC. However, it seems that the both considered models require a further modification (e.g. nonlinear reggeon trajectories and/or nonexponential vertex functions) for a more satisfactory description of the data at 19.0 GeV$\\leq \\sqrt{s}\\leq$ 7 TeV and 0.01 $\\leq |t|\\leq $14.2 GeV$^{2}$.

  20. Describing linguistic information in a behavioural framework: Possible or not?

    Energy Technology Data Exchange (ETDEWEB)

    De Cooman, G. [Universiteit Gent, Zwijnaarde (Belgium)

    1996-12-31

    The paper discusses important aspects of the representation of linguistic information, using imprecise probabilities with a behavioural interpretation. We define linguistic information as the information conveyed by statements in natural language, but restrict ourselves to simple affirmative statements of the type {open_quote}subject-is-predicate{close_quote}. Taking the behavioural stance, as it is described in detail, we investigate whether it is possible to give a mathematical model for this kind of information. In particular, we evaluate Zadeli`s suggestion that we should use possibility measures to this end. We come to tile conclusion that, generally speaking, possibility measures are possibility models for linguistic information, but that more work should be done in order to evaluate the suggestion that they may be the only ones.

  1. Nonchaoticity of Ordinary Differential Equations Describing Autonomous Transcriptional Regulatory Circuits

    International Nuclear Information System (INIS)

    Li Pengfei; Hu Gang; Chen Runsheng

    2008-01-01

    Gene transcriptional regulation (TR) processes are often described by coupled nonlinear ordinary differential equations (ODEs). When the dimension of TR circuits is high (e.g. n ≥ 3) the motions of the corresponding ODEs may, very probably, show self-sustained oscillations and chaos. On the other hand, chaoticity may be harmful for the normal biological functions of TR processes. In this letter we numerically study the dynamics of 3-gene TR ODEs in great detail, and investigate many 4-, 5-, and 10-gene TR systems by randomly choosing figures and parameters in the conventionally accepted ranges. And we find that oscillations are very seldom and no chaotic motion is observed, even if the dimension of systems is sufficiently high (n ≥ 3). It is argued that the observation of nonchaoticity of these ODEs agrees with normal functions of actual TR processes

  2. Principal spectra describing magnetooptic permittivity tensor in cubic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Hamrlová, Jana [Nanotechnology Centre, VSB – Technical University of Ostrava, listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic); IT4Innovations Centre, VSB – Technical University of Ostrava, listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic); Legut, Dominik [IT4Innovations Centre, VSB – Technical University of Ostrava, listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic); Veis, Martin [Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, Prague, 121 16 Czech Republic (Czech Republic); Pištora, Jaromír [Nanotechnology Centre, VSB – Technical University of Ostrava, listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic); Hamrle, Jaroslav, E-mail: jaroslav.hamrle@vsb.cz [IT4Innovations Centre, VSB – Technical University of Ostrava, listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic); Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, Prague, 121 16 Czech Republic (Czech Republic); Department of Physics, VSB – Technical University of Ostrava, 17. listopadu 15, Ostrava, 708 33 Czech Republic (Czech Republic)

    2016-12-15

    We provide unified phenomenological description of magnetooptic effects being linear and quadratic in magnetization. The description is based on few principal spectra, describing elements of permittivity tensor up to the second order in magnetization. Each permittivity tensor element for any magnetization direction and any sample surface orientation is simply determined by weighted summation of the principal spectra, where weights are given by crystallographic and magnetization orientations. The number of principal spectra depends on the symmetry of the crystal. In cubic crystals owning point symmetry we need only four principal spectra. Here, the principal spectra are expressed by ab initio calculations for bcc Fe, fcc Co and fcc Ni in optical range as well as in hard and soft x-ray energy range, i.e. at the 2p- and 3p-edges. We also express principal spectra analytically using modified Kubo formula.

  3. Chapter 35: Describing Data and Data Collections in the VO

    Science.gov (United States)

    Kent, B. R.; Hanisch, R. J.; Williams, R. D.

    The list of numbers: 19.22, 17.23, 18.11, 16.98, and 15.11, is of little intrinsic interest without information about the context in which they appear. For instance, are these daily closing stock prices for your favorite investment, or are they hourly photometric measurements of an increasingly bright quasar? The information needed to define this context is called metadata. Metadata are data about data. Astronomers are familiar with metadata through the headers of FITS files and the names and units associated with columns in a table or database. In the VO, metadata describe the contents of tables, images, and spectra, as well as aggregate collections of data (archives, surveys) and computational services. Moreover, VO metadata are constructed according to rules that avoid ambiguity and make it clear whether, in the example above, the stock prices are in dollars or euros, or the photometry is Johnson V or Sloan g. Organization of data is important in any scientific discipline. Equally crucial are the descriptions of that data: the organization publishing the data, its creator or the person making it available, what instruments were used, units assigned to measurement, calibration status, and data quality assessment. The Virtual Observatory metadata scheme not only applies to datasets, but to resources as well, including data archive facilities, searchable web forms, and online analysis and display tools. Since the scientific output flowing from large datasets depends greatly on how well the data are described, it is important for users to understand the basics of the metadata scheme in order to locate the data that they want and use it correctly. Metadata are the key to data discovery and data and service interoperability in the Virtual Observatory.

  4. Angular momentum and torque described with the complex octonion

    International Nuclear Information System (INIS)

    Weng, Zi-Hua

    2014-01-01

    The paper aims to adopt the complex octonion to formulate the angular momentum, torque, and force etc in the electromagnetic and gravitational fields. Applying the octonionic representation enables one single definition of angular momentum (or torque, force) to combine some physics contents, which were considered to be independent of each other in the past. J. C. Maxwell used simultaneously two methods, the vector terminology and quaternion analysis, to depict the electromagnetic theory. It motivates the paper to introduce the quaternion space into the field theory, describing the physical feature of electromagnetic and gravitational fields. The spaces of electromagnetic field and of gravitational field can be chosen as the quaternion spaces, while the coordinate component of quaternion space is able to be the complex number. The quaternion space of electromagnetic field is independent of that of gravitational field. These two quaternion spaces may compose one octonion space. Contrarily, one octonion space can be separated into two subspaces, the quaternion space and S-quaternion space. In the quaternion space, it is able to infer the field potential, field strength, field source, angular momentum, torque, and force etc in the gravitational field. In the S-quaternion space, it is capable of deducing the field potential, field strength, field source, current continuity equation, and electric (or magnetic) dipolar moment etc in the electromagnetic field. The results reveal that the quaternion space is appropriate to describe the gravitational features, including the torque, force, and mass continuity equation etc. The S-quaternion space is proper to depict the electromagnetic features, including the dipolar moment and current continuity equation etc. In case the field strength is weak enough, the force and the continuity equation etc can be respectively reduced to that in the classical field theory

  5. Case Study Research Methodology

    Directory of Open Access Journals (Sweden)

    Mark Widdowson

    2011-01-01

    Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

  6. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  7. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    The reports comprising this volume concern the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in granites in Cornwall, with particular reference to the effect of structures imposed by discontinuities on the engineering behaviour of rock masses. The topics covered are: in-situ stress measurements using (a) the hydraulic fracturing method, or (b) the US Bureau of Mines deformation probe; scanline discontinuity survey - coding form and instructions, and data; applicability of geostatistical estimation methods to scalar rock properties; comments on in-situ stress at the Carwynnen test mine and the state of stress in the British Isles. (U.K.)

  8. Microphysics evolution and methodology

    International Nuclear Information System (INIS)

    Dionisio, J.S.

    1990-01-01

    A few general features of microscopics evolution and their relationship with microscopics methodology are briefly surveyed. Several pluri-disciplinary and interdisciplinary aspects of microscopics research are also discussed in the present scientific context. The need for an equilibrium between individual tendencies and collective constraints required by team work, already formulated thirty years ago by Frederic Joliot, is particularly stressed in the present conjuncture of Nuclear Research favouring very large team projects and discouraging individual initiatives. The increasing importance of the science of science (due to their multiple social, economical, ecological aspects) and the stronger competition between national and international tendencies of scientific (and technical) cooperation are also discussed. (author)

  9. MIRD methodology; Metodologia MIRD

    Energy Technology Data Exchange (ETDEWEB)

    Rojo, Ana M [Autoridad Regulatoria Nuclear, Buenos Aires (Argentina); Gomez Parada, Ines [Sociedad Argentina de Radioproteccion, Buenos Aires (Argentina)

    2004-07-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained.

  10. Beam optimization: improving methodology

    International Nuclear Information System (INIS)

    Quinteiro, Guillermo F.

    2004-01-01

    Different optimization techniques commonly used in biology and food technology allow a systematic and complete analysis of response functions. In spite of the great interest in medical and nuclear physics in the problem of optimizing mixed beams, little attention has been given to sophisticate mathematical tools. Indeed, many techniques are perfectly suited to the typical problem of beam optimization. This article is intended as a guide to the use of two methods, namely Response Surface Methodology and Simplex, that are expected to fasten the optimization process and, meanwhile give more insight into the relationships among the dependent variables controlling the response

  11. Methodology of site studies

    International Nuclear Information System (INIS)

    Caries, J.C.; Hugon, J.; Grauby, A.

    1980-01-01

    This methodology consists in an essentially dynamic, estimated and follow-up analysis of the impact of discharges on all the environment compartments, whether natural or not, that play a part in the protection of man and his environment. It applies at two levels, to wit: the choice of site, or the detailed study of the site selected. Two examples of its application will be developed, namely: at the choice of site level in the case of marine sites, and of the detailed study level of the chosen site in that of a riverside site [fr

  12. Alternative pricing methodologies

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    With the increased interest in competitive market forces and growing recognition of the deficiencies in current practices, FERC and others are exploring alternatives to embedded cost pricing. A number of these alternatives are discussed in this chapter. Marketplace pricing, discussed briefly here, is the subject of the next chapter. Obviously, the pricing formula may combine several of these methodologies. One utility of which the authors are aware is seeking a price equal to the sum of embedded costs, opportunity costs, line losses, value of service, FERC's percentage adder formula and a contract service charge

  13. Parenting behaviour described by mothers in a general population sample.

    Science.gov (United States)

    Thompson, Margaret J J; Raynor, Alex; Cornah, Deborah; Stevenson, Jim; Sonuga-Barke, Edmund J S

    2002-03-01

    To collect mothers' reports of the range of behaviours used by them in the management of their children's difficult behaviour. A cross-sectional study using an interview with both semi-structured and open-ended question routes. SAMPLING FRAME: The population of mothers with 10-year-old children living in the New Forest region of Hampshire, UK. Mothers (n=67), selected from the sampling frame, were interviewed about the range of parenting behaviours they used in the management of their children's difficult behaviour. Mothers reported a wide range of behaviours. Both authoritative (e.g. reasoning was mentioned by 42%) and authoritarian (e.g. the use of physical punishment was mentioned by 37%) behaviours were mentioned frequently. Although the different behaviours within these domains were intercorrelated, there was little overlap between the two domains. The use of praise for good behaviour seemed to be independent of other behaviours. There was no association between mothers' parenting behaviours and the behaviour problems of their children. These data suggest that parenting takes many forms, with variations of behaviour across the 'normal' range being unlikely to represent a significant risk to children's development. Public funding for parenting education should be targeted at those children who are at significant risk from extreme forms of parenting.

  14. Using a Realist Research Methodology in Policy Analysis

    Science.gov (United States)

    Lourie, Megan; Rata, Elizabeth

    2017-01-01

    The article describes the usefulness of a realist methodology in linking sociological theory to empirically obtained data through the development of a methodological device. Three layers of analysis were integrated: 1. the findings from a case study about Maori language education in New Zealand; 2. the identification and analysis of contradictions…

  15. A Methodology for Integrating Maintainability Using Software Metrics

    OpenAIRE

    Lewis, John A.; Henry, Sallie M.

    1989-01-01

    Maintainability must be integrated into software early in the development process. But for practical use, the techniques used must be as unobtrusive to the existing software development process as possible. This paper defines a methodology for integrating maintainability into large-scale software and describes an experiment which implemented the methodology into a major commercial software development environment.

  16. Level 2 PSA methodology and severe accident management

    International Nuclear Information System (INIS)

    1997-01-01

    The objective of the work was to review current Level 2-PSA (Probabilistic Safety Assessment) methodologies and practices and to investigate how Level 2-PSA can support severe accident management programmes, i.e. the development, implementation, training and optimisation of accident management strategies and measures. For the most part, the presented material reflects the state in 1996. Current Level 2 PSA results and methodologies are reviewed and evaluated with respect to plant type specific and generic insights. Approaches and practices for using PSA results in the regulatory context and for supporting severe accident management programmes by input from level 2 PSAs are examined. The work is based on information contained in: PSA procedure guides, PSA review guides and regulatory guides for the use of PSA results in risk informed decision making; plant specific PSAs and PSA related literature exemplifying specific procedures, methods, analytical models, relevant input data and important results, use of computer codes and results of code calculations. The PSAs are evaluated with respect to results and insights. In the conclusion section, the present state of risk informed decision making, in particular in the level 2 domain, is described and substantiated by relevant examples

  17. Some Findings Concerning Requirements in Agile Methodologies

    Science.gov (United States)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  18. Researching Lean: Methodological implications of loose definitions

    DEFF Research Database (Denmark)

    Brännmark, Mikael; Langstrand, Jostein; Johansson, Stina

    2012-01-01

    practices seem to overlap with other popular management concepts, such as High Performance Work Systems, World Class Manufacturing and Total Quality Management. This confusion, combined with different methodological and theoretical traditions, has led to much debate and contradictory conclusions regarding...... Lean. The purpose of the paper is to illustrate some key methodological issues that need to be considered in future Lean research to allow increased understanding of Lean effects for different stakeholders, primarily meaning the customer, employer and employees. Design/methodology/approach – The paper...... on the case studies, we suggest that future investigations describe the Lean interventions in more detail. General descriptions or analogies, e.g. ‘learning organizations’, presumably increase the present confusion regarding Lean impact on different stakeholders. The case studies also illustrate...

  19. A methodology for development of biocatalytic processes

    DEFF Research Database (Denmark)

    Lima Ramos, Joana

    are available. The first case study presents a rational approach for defining a development strategy for multi-enzymatic processes. The proposed methodology requires a profound and structured knowledge of the multi-enzyme systems, integrating chemistry, biological and process engineering. In order to suggest......). These process metrics can often be attained by improvements in the reaction chemistry, the biocatalyst, and/or by process engineering, which often requires a complex process development strategy. Interestingly this complexity, which arises from the need for integration of biological and process technologies...... and their relationship with the overall process is not clear.The work described in this thesis presents a methodological approach for early stage development of biocatalytic processes, understanding and dealing with the reaction, biocatalyst and process constraints. When applied, this methodology has a decisive role...

  20. VIII. THE PAST, PRESENT, AND FUTURE OF DEVELOPMENTAL METHODOLOGY.

    Science.gov (United States)

    Little, Todd D; Wang, Eugene W; Gorrall, Britt K

    2017-06-01

    This chapter selectively reviews the evolution of quantitative practices in the field of developmental methodology. The chapter begins with an overview of the past in developmental methodology, discussing the implementation and dissemination of latent variable modeling and, in particular, longitudinal structural equation modeling. It then turns to the present state of developmental methodology, highlighting current methodological advances in the field. Additionally, this section summarizes ample quantitative resources, ranging from key quantitative methods journal articles to the various quantitative methods training programs and institutes. The chapter concludes with the future of developmental methodology and puts forth seven future innovations in the field. The innovations discussed span the topics of measurement, modeling, temporal design, and planned missing data designs. Lastly, the chapter closes with a brief overview of advanced modeling techniques such as continuous time models, state space models, and the application of Bayesian estimation in the field of developmental methodology. © 2017 The Society for Research in Child Development, Inc.

  1. RHIC Data Correlation Methodology

    International Nuclear Information System (INIS)

    Michnoff, R.; D'Ottavio, T.; Hoff, L.; MacKay, W.; Satogata, T.

    1999-01-01

    A requirement for RHIC data plotting software and physics analysis is the correlation of data from all accelerator data gathering systems. Data correlation provides the capability for a user to request a plot of multiple data channels vs. time, and to make meaningful time-correlated data comparisons. The task of data correlation for RHIC requires careful consideration because data acquisition triggers are generated from various asynchronous sources including events from the RHIC Event Link, events from the two Beam Sync Links, and other unrelated clocks. In order to correlate data from asynchronous acquisition systems a common time reference is required. The RHIC data correlation methodology will allow all RHIC data to be converted to a common wall clock time, while still preserving native acquisition trigger information. A data correlation task force team, composed of the authors of this paper, has been formed to develop data correlation design details and provide guidelines for software developers. The overall data correlation methodology will be presented in this paper

  2. SMART performance analysis methodology

    International Nuclear Information System (INIS)

    Lim, H. S.; Kim, H. C.; Lee, D. J.

    2001-04-01

    To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

  3. Relative Hazard Calculation Methodology

    International Nuclear Information System (INIS)

    DL Strenge; MK White; RD Stenner; WB Andrews

    1999-01-01

    The methodology presented in this document was developed to provide a means of calculating the RH ratios to use in developing useful graphic illustrations. The RH equation, as presented in this methodology, is primarily a collection of key factors relevant to understanding the hazards and risks associated with projected risk management activities. The RH equation has the potential for much broader application than generating risk profiles. For example, it can be used to compare one risk management activity with another, instead of just comparing it to a fixed baseline as was done for the risk profiles. If the appropriate source term data are available, it could be used in its non-ratio form to estimate absolute values of the associated hazards. These estimated values of hazard could then be examined to help understand which risk management activities are addressing the higher hazard conditions at a site. Graphics could be generated from these absolute hazard values to compare high-hazard conditions. If the RH equation is used in this manner, care must be taken to specifically define and qualify the estimated absolute hazard values (e.g., identify which factors were considered and which ones tended to drive the hazard estimation)

  4. Insights into PRA methodologies

    International Nuclear Information System (INIS)

    Gallagher, D.; Lofgren, E.; Atefi, B.; Liner, R.; Blond, R.; Amico, P.

    1984-08-01

    Probabilistic Risk Assessments (PRAs) for six nuclear power plants were examined to gain insight into how the choice of analytical methods can affect the results of PRAs. The PRA sreflectope considered was limited to internally initiated accidents sequences through core melt. For twenty methodological topic areas, a baseline or minimal methodology was specified. The choice of methods for each topic in the six PRAs was characterized in terms of the incremental level of effort above the baseline. A higher level of effort generally reflects a higher level of detail or a higher degree of sophistication in the analytical approach to a particular topic area. The impact on results was measured in terms of how additional effort beyond the baseline level changed the relative importance and ordering of dominant accident sequences compared to what would have been observed had methods corresponding to the baseline level of effort been employed. This measure of impact is a more useful indicator of how methods affect perceptions of plant vulnerabilities than changes in core melt frequency would be. However, the change in core melt frequency was used as a secondary measure of impact for nine topics where availability of information permitted. Results are presented primarily in the form of effort-impact matrices for each of the twenty topic areas. A suggested effort-impact profile for future PRAs is presented

  5. Parameters of Instrumental Swallowing Evaluations: Describing a Diagnostic Dilemma.

    Science.gov (United States)

    Pisegna, Jessica M; Langmore, Susan E

    2016-06-01

    The aim of this study was to compare selected parameters of two swallow evaluations: fiberoptic endoscopic evaluation of swallowing (FEES) and the modified barium swallow (MBS) study. This was a cross-sectional, descriptive study. Fifty-five clinicians were asked to watch video recordings of swallow evaluations of 2 patients that were done using fluoroscopy and endoscopy simultaneously. In a randomized order, clinicians viewed 4 edited videos from simultaneous evaluations: the FEES and MBS videos of patient 1 and 2 each taking one swallow of 5 mL applesauce. Clinicians filled out a questionnaire that asked (1) which anatomical sites they could visualize on each video, (2) where they saw pharyngeal residue after a swallow, (3) their overall clinical impression of the pharyngeal residue, and (4) their opinions of the evaluation styles. Clinicians reported a significant difference in the visualization of anatomical sites, 11 of the 15 sites were reported as better-visualized on the FEES than on the MBS video (p < 0.05). Clinicians also rated residue to be present in more locations on the FEES than on the MBS. Clinicians' overall impressions of the severity of residue on the same exact swallow were significantly different depending on the evaluation type (FEES vs. MBS for patient 1 χ(2) = 20.05, p < 0.0001; patient 2 χ(2) = 7.52, p = 0.006), with FEES videos rated more severely. FEES advantages were: more visualization of pharyngeal and laryngeal swallowing anatomy and residue. However, as a result, clinicians provided more severe impressions of residue amount on FEES. On one hand, this suggests that FEES is a more sensitive tool than MBS studies, but on the other hand, clinicians might provide more severe interpretations on FEES.

  6. Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

    International Nuclear Information System (INIS)

    Ritzman, R.L.; Husseiny, A.A.

    1980-08-01

    The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

  7. Scrum methodology in banking environment

    OpenAIRE

    Strihová, Barbora

    2015-01-01

    Bachelor thesis "Scrum methodology in banking environment" is focused on one of agile methodologies called Scrum and description of the methodology used in banking environment. Its main goal is to introduce the Scrum methodology and outline a real project placed in a bank focused on software development through a case study, address problems of the project, propose solutions of the addressed problems and identify anomalies of Scrum in software development constrained by the banking environmen...

  8. Experimental Economics: Some Methodological Notes

    OpenAIRE

    Fiore, Annamaria

    2009-01-01

    The aim of this work is presenting in a self-contained paper some methodological aspects as they are received in the current experimental literature. The purpose has been to make a critical review of some very influential papers dealing with methodological issues. In other words, the idea is to have a single paper where people first approaching experimental economics can find summarised (some) of the most important methodological issues. In particular, the focus is on some methodological prac...

  9. Communication skills training: describing a new conceptual model.

    Science.gov (United States)

    Brown, Richard F; Bylund, Carma L

    2008-01-01

    Current research in communication in physician-patient consultations is multidisciplinary and multimethodological. As this research has progressed, a considerable body of evidence on the best practices in physician-patient communication has been amassed. This evidence provides a foundation for communication skills training (CST) at all levels of medical education. Although the CST literature has demonstrated that communication skills can be taught, one critique of this literature is that it is not always clear which skills are being taught and whether those skills are matched with those being assessed. The Memorial Sloan-Kettering Cancer Center Comskil Model for CST seeks to answer those critiques by explicitly defining the important components of a consultation, based on Goals, Plans, and Actions theories and sociolinguistic theory. Sequenced guidelines as a mechanism for teaching about particular communication challenges are adapted from these other methods. The authors propose that consultation communication can be guided by an overarching goal, which is achieved through the use of a set of predetermined strategies. Strategies are common in CST; however, strategies often contain embedded communication skills. These skills can exist across strategies, and the Comskil Model seeks to make them explicit in these contexts. Separate from the skills are process tasks and cognitive appraisals that need to be addressed in teaching. The authors also describe how assessment practices foster concordance between skills taught and those assessed through careful coding of trainees' communication encounters and direct feedback.

  10. Terms for describing new, advanced nuclear power plants

    International Nuclear Information System (INIS)

    1997-04-01

    The IAEA's Division of Nuclear Power and the Fuel Cycle (then the Division of Nuclear Power) took an initiative in this field some years ago when work was initiated in the area of ''safety related terms'' by its International Working Group on Advanced Technologies for Water Cooled Reactors. This activity drew on advice from reactor design organizations, research institutes and government organizations, and aimed at helping eliminate confusion and misuse of safety related terms in widespread use, clarifying technical thinking regarding these terms, and improving nuclear power acceptability by providing precisely described technical meanings to them. After discussion also in the International Working Groups for Gas Cooled Reactors and Fast Reactors, the work resulted in the publication in September 1991 of IAEA-TECDOC-626, entitled ''Safety Related Terms for Advanced Nuclear Plants'', which has become a widely used publication. The present TECDOC has been prepared using the same approach to obtain advice from involved parties. Drafts of this report have been reviewed by the International Working Groups on Water Cooled Reactors, Fast Reactors and Gas Cooled Reactors, as well as by the IAEA's International Fusion Research Council (IFRC). The comments and suggestions received have been evaluated and utilized for producing the present TECDOC. 3 figs

  11. INCAS: an analytical model to describe displacement cascades

    Energy Technology Data Exchange (ETDEWEB)

    Jumel, Stephanie E-mail: stephanie.jumel@edf.fr; Claude Van-Duysen, Jean E-mail: jean-claude.van-duysen@edf.fr

    2004-07-01

    REVE (REactor for Virtual Experiments) is an international project aimed at developing tools to simulate neutron irradiation effects in Light Water Reactor materials (Fe, Ni or Zr-based alloys). One of the important steps of the project is to characterise the displacement cascades induced by neutrons. Accordingly, the Department of Material Studies of Electricite de France developed an analytical model based on the binary collision approximation. This model, called INCAS (INtegration of CAScades), was devised to be applied on pure elements; however, it can also be used on diluted alloys (reactor pressure vessel steels, etc.) or alloys composed of atoms with close atomic numbers (stainless steels, etc.). INCAS describes displacement cascades by taking into account the nuclear collisions and electronic interactions undergone by the moving atoms. In particular, it enables to determine the mean number of sub-cascades induced by a PKA (depending on its energy) as well as the mean energy dissipated in each of them. The experimental validation of INCAS requires a large effort and could not be carried out in the framework of the study. However, it was verified that INCAS results are in conformity with those obtained from other approaches. As a first application, INCAS was applied to determine the sub-cascade spectrum induced in iron by the neutron spectrum corresponding to the central channel of the High Flux Irradiation Reactor of Oak Ridge National Laboratory.

  12. INCAS: an analytical model to describe displacement cascades

    Science.gov (United States)

    Jumel, Stéphanie; Claude Van-Duysen, Jean

    2004-07-01

    REVE (REactor for Virtual Experiments) is an international project aimed at developing tools to simulate neutron irradiation effects in Light Water Reactor materials (Fe, Ni or Zr-based alloys). One of the important steps of the project is to characterise the displacement cascades induced by neutrons. Accordingly, the Department of Material Studies of Electricité de France developed an analytical model based on the binary collision approximation. This model, called INCAS (INtegration of CAScades), was devised to be applied on pure elements; however, it can also be used on diluted alloys (reactor pressure vessel steels, etc.) or alloys composed of atoms with close atomic numbers (stainless steels, etc.). INCAS describes displacement cascades by taking into account the nuclear collisions and electronic interactions undergone by the moving atoms. In particular, it enables to determine the mean number of sub-cascades induced by a PKA (depending on its energy) as well as the mean energy dissipated in each of them. The experimental validation of INCAS requires a large effort and could not be carried out in the framework of the study. However, it was verified that INCAS results are in conformity with those obtained from other approaches. As a first application, INCAS was applied to determine the sub-cascade spectrum induced in iron by the neutron spectrum corresponding to the central channel of the High Flux Irradiation Reactor of Oak Ridge National Laboratory.

  13. INCAS: an analytical model to describe displacement cascades

    International Nuclear Information System (INIS)

    Jumel, Stephanie; Claude Van-Duysen, Jean

    2004-01-01

    REVE (REactor for Virtual Experiments) is an international project aimed at developing tools to simulate neutron irradiation effects in Light Water Reactor materials (Fe, Ni or Zr-based alloys). One of the important steps of the project is to characterise the displacement cascades induced by neutrons. Accordingly, the Department of Material Studies of Electricite de France developed an analytical model based on the binary collision approximation. This model, called INCAS (INtegration of CAScades), was devised to be applied on pure elements; however, it can also be used on diluted alloys (reactor pressure vessel steels, etc.) or alloys composed of atoms with close atomic numbers (stainless steels, etc.). INCAS describes displacement cascades by taking into account the nuclear collisions and electronic interactions undergone by the moving atoms. In particular, it enables to determine the mean number of sub-cascades induced by a PKA (depending on its energy) as well as the mean energy dissipated in each of them. The experimental validation of INCAS requires a large effort and could not be carried out in the framework of the study. However, it was verified that INCAS results are in conformity with those obtained from other approaches. As a first application, INCAS was applied to determine the sub-cascade spectrum induced in iron by the neutron spectrum corresponding to the central channel of the High Flux Irradiation Reactor of Oak Ridge National Laboratory

  14. Computer modeling describes gravity-related adaptation in cell cultures.

    Science.gov (United States)

    Alexandrov, Ludmil B; Alexandrova, Stoyana; Usheva, Anny

    2009-12-16

    Questions about the changes of biological systems in response to hostile environmental factors are important but not easy to answer. Often, the traditional description with differential equations is difficult due to the overwhelming complexity of the living systems. Another way to describe complex systems is by simulating them with phenomenological models such as the well-known evolutionary agent-based model (EABM). Here we developed an EABM to simulate cell colonies as a multi-agent system that adapts to hyper-gravity in starvation conditions. In the model, the cell's heritable characteristics are generated and transferred randomly to offspring cells. After a qualitative validation of the model at normal gravity, we simulate cellular growth in hyper-gravity conditions. The obtained data are consistent with previously confirmed theoretical and experimental findings for bacterial behavior in environmental changes, including the experimental data from the microgravity Atlantis and the Hypergravity 3000 experiments. Our results demonstrate that it is possible to utilize an EABM with realistic qualitative description to examine the effects of hypergravity and starvation on complex cellular entities.

  15. [Nursing between ethic and aesthetic. Profession described by media].

    Science.gov (United States)

    Gradellini, Cinzia; Idamou, Sara; Lusetti, Simona

    2013-01-01

    Nurse's role, according to the media, does not fit the role and evolution that nursing had in these last years: nursing remains unknown to public. Objective of research is to define how nurse's image is described by media. analysis of two newspapers, at national and local level with respect to articles about nurses, taking into account numbers of articles, position, topic (malpractice, frauds/crimes, job/economical cuts, praise). A second part of research has been focused on online newspapers, by using key words. Analysis of television medical dramas about presence of nurse, competences, relationship with physician/patient, social elements, context of work (acute or chronic), impact on patients welfare, and eventually ethical-deontological aspects has been carried out. on three hundred articles related health context, thirty-nine talk about nurse; five of those are in first page. 39% of articles regards frauds/crimes, 19% job/economical cuts, 15% malpractice. With respect to online articles, 66% concerns frauds/crimes. In medical dramas there is small attention to nurse who has generic competence as well as other health professional but doctor. The nurse character is played only by women. a low level of professionalism comes out both from newspaper and television. A specific professional identity is often absent furthermore nurses are relegated to a role of weakness in work and private circumstance.

  16. An ontological approach to describing neurons and their relationships

    Directory of Open Access Journals (Sweden)

    David J. Hamilton

    2012-04-01

    Full Text Available The advancement of neuroscience, perhaps the most information rich discipline of all the life sciences, requires basic frameworks for organizing the vast amounts of data generated by the research community to promote novel insights and integrated understanding. Since Cajal, the neuron remains a fundamental unit of the nervous system, yet even with the explosion of information technology, we still have few comprehensive or systematic strategies for aggregating cell-level knowledge. Progress toward this goal is hampered by the multiplicity of names for cells and by lack of a consensus on the criteria for defining neuron types. However, through umbrella projects like the Neuroscience Information Framework and the International Neuroinformatics Coordinating Facility, we have the opportunity to propose and implement an informatics infrastructure for establishing common tools and approaches to describe neurons through a standard terminology for nerve cells and a database (a Neuron Registry where these descriptions can be deposited and compared. This article provides an overview of the problem and outlines a solution approach utilizing ontological characterizations.

  17. DBH Prediction Using Allometry Described by Bivariate Copula Distribution

    Science.gov (United States)

    Xu, Q.; Hou, Z.; Li, B.; Greenberg, J. A.

    2017-12-01

    Forest biomass mapping based on single tree detection from the airborne laser scanning (ALS) usually depends on an allometric equation that relates diameter at breast height (DBH) with per-tree aboveground biomass. The incapability of the ALS technology in directly measuring DBH leads to the need to predict DBH with other ALS-measured tree-level structural parameters. A copula-based method is proposed in the study to predict DBH with the ALS-measured tree height and crown diameter using a dataset measured in the Lassen National Forest in California. Instead of exploring an explicit mathematical equation that explains the underlying relationship between DBH and other structural parameters, the copula-based prediction method utilizes the dependency between cumulative distributions of these variables, and solves the DBH based on an assumption that for a single tree, the cumulative probability of each structural parameter is identical. Results show that compared with the bench-marking least-square linear regression and the k-MSN imputation, the copula-based method obtains better accuracy in the DBH for the Lassen National Forest. To assess the generalization of the proposed method, prediction uncertainty is quantified using bootstrapping techniques that examine the variability of the RMSE of the predicted DBH. We find that the copula distribution is reliable in describing the allometric relationship between tree-level structural parameters, and it contributes to the reduction of prediction uncertainty.

  18. Problems of describing the cumulative effect in relativistic nuclear physics

    International Nuclear Information System (INIS)

    Baldin, A.M.

    1979-01-01

    The problem of describing the cumulative effect i.e., the particle production on nuclei in the range kinematically forbidden for one-nucleon collisions, is studied. Discrimination of events containing cumulative particles fixes configurations in the wave function of a nucleus, when several nucleons are closely spaced and their quark-parton components are collectivized. For the cumulative processes under consideration large distances between quarks are very important. The fundamental facts and theoretical interpretation of the quantum field theory and of the condensed media theory in the relativistic nuclear physics are presented in brief. The collisions of the relativistic nuclei with low momentum transfers is considered in a fast moving coordinate system. The basic parameter determining this type of collisions is the energy of nucleon binding in nuclei. It has been shown that the short-range correlation model provides a good presentation of many characteristics of the multiple particle production and it may be regarded as an approximate universal property of hadron interactions

  19. The self-describing data sets file protocol and Toolkit

    International Nuclear Information System (INIS)

    Borland, M.; Emery, L.

    1995-01-01

    The Self-Describing Data Sets (SDDS) file protocol continues to be used extensively in commissioning the Advanced Photon Source (APS) accelerator complex. SDDS protocol has proved useful primarily due to the existence of the SDDS Toolkit, a growing set of about 60 generic commandline programs that read and/or write SDDS files. The SDDS Toolkit is also used extensively for simulation postprocessing, giving physicists a single environment for experiment and simulation. With the Toolkit, new SDDS data is displayed and subjected to complex processing without developing new programs. Data from EPICS, lab instruments, simulation, and other sources are easily integrated. Because the SDDS tools are commandline-based, data processing scripts are readily written using the user's preferred shell language. Since users work within a UNIX shell rather than an application-specific shell or GUI, they may add SDDS-compliant programs and scripts to their personal toolkits without restriction or complication. The SDDS Toolkit has been run under UNIX on SUN OS4, HP-UX, and LINUX. Application of SDDS to accelerator operation is being pursued using Tcl/Tk to provide a GUI

  20. Conceptual hierarchical modeling to describe wetland plant community organization

    Science.gov (United States)

    Little, A.M.; Guntenspergen, G.R.; Allen, T.F.H.

    2010-01-01

    Using multivariate analysis, we created a hierarchical modeling process that describes how differently-scaled environmental factors interact to affect wetland-scale plant community organization in a system of small, isolated wetlands on Mount Desert Island, Maine. We followed the procedure: 1) delineate wetland groups using cluster analysis, 2) identify differently scaled environmental gradients using non-metric multidimensional scaling, 3) order gradient hierarchical levels according to spatiotem-poral scale of fluctuation, and 4) assemble hierarchical model using group relationships with ordination axes and post-hoc tests of environmental differences. Using this process, we determined 1) large wetland size and poor surface water chemistry led to the development of shrub fen wetland vegetation, 2) Sphagnum and water chemistry differences affected fen vs. marsh / sedge meadows status within small wetlands, and 3) small-scale hydrologic differences explained transitions between forested vs. non-forested and marsh vs. sedge meadow vegetation. This hierarchical modeling process can help explain how upper level contextual processes constrain biotic community response to lower-level environmental changes. It creates models with more nuanced spatiotemporal complexity than classification and regression tree procedures. Using this process, wetland scientists will be able to generate more generalizable theories of plant community organization, and useful management models. ?? Society of Wetland Scientists 2009.

  1. The complexity of organizational change: describing communication during organizational turbulence.

    Science.gov (United States)

    Salem, Philip

    2013-01-01

    Organizational researchers and practitioners have been interested in organizational change for some time. Historically, they have directed most of their efforts at improving the efficiency of planned top-down change. These efforts were strategic attempts at altering parameters leading to transformational change. Most efforts failed to meet their intended purposes. Transformational organizational change has not been likely. The legitimate systems have been robust. There has been little systematic investigation of the communication occurring during these efforts. The purpose of this essay is to describe results of a mixed methods research project answering two research questions. (a) How do organizational members communicate during a time of turbulence? (b) What features of this communication suggest the potential for or resistance to transformative change? Comparing the results at the beginning of the period to other periods, gives insight into how social actors communicate and enact the organization during a threshold period where transformational change was possible. Results reveal identifiable patterns of communication as communication strategies, parameters, or basins of attraction. The overall pattern explains how micro communication patterns intersect and how the accumulation of these patterns may resist or accomplish change at a macro level.

  2. Kinetic isotope effects and how to describe them

    Directory of Open Access Journals (Sweden)

    Konstantin Karandashev

    2017-11-01

    Full Text Available We review several methods for computing kinetic isotope effects in chemical reactions including semiclassical and quantum instanton theory. These methods describe both the quantization of vibrational modes as well as tunneling and are applied to the ⋅H + H2 and ⋅H + CH4 reactions. The absolute rate constants computed with the semiclassical instanton method both using on-the-fly electronic structure calculations and fitted potential-energy surfaces are also compared directly with exact quantum dynamics results. The error inherent in the instanton approximation is found to be relatively small and similar in magnitude to that introduced by using fitted surfaces. The kinetic isotope effect computed by the quantum instanton is even more accurate, and although it is computationally more expensive, the efficiency can be improved by path-integral acceleration techniques. We also test a simple approach for designing potential-energy surfaces for the example of proton transfer in malonaldehyde. The tunneling splittings are computed, and although they are found to deviate from experimental results, the ratio of the splitting to that of an isotopically substituted form is in much better agreement. We discuss the strengths and limitations of the potential-energy surface and based on our findings suggest ways in which it can be improved.

  3. Using the MWC model to describe heterotropic interactions in hemoglobin

    Science.gov (United States)

    Rapp, Olga

    2017-01-01

    Hemoglobin is a classical model allosteric protein. Research on hemoglobin parallels the development of key cooperativity and allostery concepts, such as the ‘all-or-none’ Hill formalism, the stepwise Adair binding formulation and the concerted Monod-Wymann-Changuex (MWC) allosteric model. While it is clear that the MWC model adequately describes the cooperative binding of oxygen to hemoglobin, rationalizing the effects of H+, CO2 or organophosphate ligands on hemoglobin-oxygen saturation using the same model remains controversial. According to the MWC model, allosteric ligands exert their effect on protein function by modulating the quaternary conformational transition of the protein. However, data fitting analysis of hemoglobin oxygen saturation curves in the presence or absence of inhibitory ligands persistently revealed effects on both relative oxygen affinity (c) and conformational changes (L), elementary MWC parameters. The recent realization that data fitting analysis using the traditional MWC model equation may not provide reliable estimates for L and c thus calls for a re-examination of previous data using alternative fitting strategies. In the current manuscript, we present two simple strategies for obtaining reliable estimates for MWC mechanistic parameters of hemoglobin steady-state saturation curves in cases of both evolutionary and physiological variations. Our results suggest that the simple MWC model provides a reasonable description that can also account for heterotropic interactions in hemoglobin. The results, moreover, offer a general roadmap for successful data fitting analysis using the MWC model. PMID:28793329

  4. Environmental Impact Section

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

  5. CMOS Active Pixel Sensor Technology and Reliability Characterization Methodology

    Science.gov (United States)

    Chen, Yuan; Guertin, Steven M.; Pain, Bedabrata; Kayaii, Sammy

    2006-01-01

    This paper describes the technology, design features and reliability characterization methodology of a CMOS Active Pixel Sensor. Both overall chip reliability and pixel reliability are projected for the imagers.

  6. Methodology for developing new test methods

    Directory of Open Access Journals (Sweden)

    A. I. Korobko

    2017-06-01

    Full Text Available The paper describes the methodology for developing new test methods and forming solutions for the development of new test methods. The basis of the methodology for developing new test methods is the individual elements of the system and process approaches. They contribute to the development of an effective research strategy for the object, the study of interrelations, the synthesis of an adequate model of the test method. The effectiveness of the developed test method is determined by the correct choice of the set of concepts, their interrelations and mutual influence. This allows you to solve the tasks assigned to achieve the goal. The methodology is based on the use of fuzzy cognitive maps. The question of the choice of the method on the basis of which the model for the formation of solutions is based is considered. The methodology provides for recording a model for a new test method in the form of a finite set of objects. These objects are significant for the test method characteristics. Then a causal relationship is established between the objects. Further, the values of fitness indicators and the observability of the method and metrological tolerance for the indicator are established. The work is aimed at the overall goal of ensuring the quality of tests by improving the methodology for developing the test method.

  7. Describing of elements IO field in a testing computer program

    Directory of Open Access Journals (Sweden)

    Igor V. Loshkov

    2017-01-01

    Full Text Available A standard of describing the process of displaying interactive windows on a computer monitor, through which an output of questions and input of answers are implemented during computer testing, is presented in the article [11]. According to the proposed standard, the description of the process mentioned above is performed with a format line, containing element names, their parameters as well as grouping and auxiliary symbols. Program objects are described using elements of standard. The majority of objects create input and output windows on a computer monitor. The aim of our research was to develop a minimum possible set of elements of standard to perform mathematical and computer science testing.The choice of elements of the standard was conducted in parallel with the development and testing of the program that uses them. This approach made it possible to choose a sufficiently complete set of elements for testing in fields of study mentioned above. For the proposed elements, names were selected in such a way: firstly, they indicate their function and secondly, they coincide with the names of elements in other programming languages that are similar by function. Parameters, their names, their assignments and accepted values are proposed for the elements. The principle of name selection for the parameters was the same as for elements of the standard: the names should correspond to their assignments or coincide with names of similar parameters in other programming languages. The parameters define properties of objects. Particularly, while the elements of standard create windows, the parameters define object properties (location, size, appearance and the sequence in which windows are created. All elements of standard, proposed in this article are composed in a table, the columns of which have names and functions of these elements. Inside the table, the elements of standard are grouped row by row into four sets: input elements, output elements, input

  8. Contemporary musical historiography and the problems of the methodological approach

    Directory of Open Access Journals (Sweden)

    Vasić Aleksandar N.

    2005-01-01

    Full Text Available The first foreign review of the general history of music translated to Serbian language was Karl Nef's Einführung in die Musikgeschichte. It was published in Belgrade, in 1937. During the '70s and '80s of the 20th century, there were translated popularly conceived histories of music of Luciano Alberti and Nobert Difourc. In 2002/2004 the Belgrade publisher "Clio" issued the second and third volume of Gerald Abraham's Concise Oxford History of Music. It was estimated that the long pause, as well as the choice of the prominent British author, present strong reasons for detailed critical study approach to the latest edition. The character of the study is threefold and interdisciplinary: musicological, philological and bibliographical. The first part of the study is the analysis of the writer's methodological procedure that can be discussed. Namely, next to the significant virtues in expert and style such as conciseness in statements original observations and evaluations, and literate, aesthetic attractiveness, Abraham's book also contains contradictory of methodological character. The writer is not completely consistent in conducting of the chosen methodological procedure. On one side, he does not describe the history of European music with period terms such as baroque, classicism impressionism or expressionism. On the other side, he nevertheless uses period terms in some way, but only in relation to the music of the 19th century. The only style that The Concise Oxford History of Music elaborates is Romanticism. Such inconsistent ness cannot be justified even more from the aspect of potential student readers of this reference book. The second part of disquisition contains analysis and evaluation of the Serbian translation of Abraham's History. That philological section of the work discusses mistakes in translation, controversial examples of transcription and adaptation of foreign names, grammatical, lexical and punctuation omissions. Also

  9. Autopathography and depression: describing the 'despair beyond despair'.

    Science.gov (United States)

    Moran, Stephen T

    2006-01-01

    The Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, emphasizes diagnosis and statistically significant commonalities in mental disorders. As stated in the Introduction, "[i]t must be admitted that no definition adequately specifies precise boundaries for the concept of 'mental disorder' " (DSM-IV, 1994, xxi). Further, "[t]he clinician using DSM-IV should ... consider that individuals sharing a diagnosis are likely to be heterogeneous, even in regard to the defining features of the diagnosis, and that boundary cases will be difficult to diagnose in any but a probabilistic fashion" (DSM-IV, 1994, xxii). This article proposes that it may be helpful for clinicians to study narratives of illness which emphasize this heterogeneity over statistically significant symptoms. This paper examines the recorded experiences of unusually articulate sufferers of the disorder classified as Major Depression. Although sharing a diagnosis, Hemingway, Fitzgerald, and Styron demonstrated different understandings of their illness and its symptoms and experienced different resolutions, which may have had something to do with the differing meanings they made of it. I have proposed a word, autopathography, to describe a type of literature in which the author's illness is the primary lens through which the narrative is filtered. This word is an augmentation of an existing word, pathography, which The Oxford English Dictionary, Second Edition, defines as "a) [t]he, or a, description of a disease," and "b) [t]he, or a, study of the life and character of an individual or community as influenced by a disease." The second definition is the one that I find relevant and which I feel may be helpful to clinicians in broadening their understanding of the patient's experience.

  10. Describing phase coexistence in systems with small phases

    International Nuclear Information System (INIS)

    Lovett, R

    2007-01-01

    Clusters of atoms can be studied in molecular beams and by computer simulation; 'liquid drops' provide elementary models for atomic nuclei and for the critical nuclei of nucleation theory. These clusters are often described in thermodynamic terms, but the behaviour of small clusters near a phase boundary is qualitatively different from the behaviour at a first order phase transition in idealized thermodynamics. In the idealized case the density and entropy show mathematically sharp discontinuities when the phase boundary is crossed. In large, but finite, systems, the phase boundaries become regions of state space wherein these properties vary rapidly but continuously. In small clusters with a large surface/volume ratio, however, the positive interfacial free energy makes it unlikely, even in states on phase boundaries, that a cluster will have a heterogeneous structure. What is actually seen in these states is a structure that fluctuates in time between homogeneous structures characteristic of the two sides of the phase boundary. That is, structural fluctuations are observed. Thermodynamics only predicts average properties; statistical mechanics is required to understand these fluctuations. Failure to distinguish thermodynamic properties and characterizations of fluctuations, particularly in the context of first order phase transitions, has led to suggestions that the classical rules for thermodynamic stability are violated in small systems and that classical thermodynamics provides an inconsistent description of these systems. Much of the confusion stems from taking statistical mechanical identifications of thermodynamic properties, explicitly developed for large systems, and applying them uncritically to small systems. There are no inconsistencies if thermodynamic properties are correctly identified and the distinction between thermodynamic properties and fluctuations is made clear

  11. The experimental test of the adequateness of relativistic impulse approximation when describing the lightest nuclei break-up

    International Nuclear Information System (INIS)

    Sitnik, I.M.

    1995-01-01

    The behaviour of the lightest nuclei break-up cross sections at zero angle has been analyzed in vicinity of the maximum. It is shown that asymmetry of cross sections relatively maximum is in conflict with nonrelativistic impulse approximation, but agrees well with one of relativistic approaches to describe this process. 10 refs., 9 figs

  12. Cooperative learning as a methodology for inclusive education development

    Directory of Open Access Journals (Sweden)

    Yolanda Muñoz Martínez

    2017-06-01

    Full Text Available This paper presents the methodology of cooperative learning as a strategy to develop the principles of inclusive education. It has a very practical orientation, with the intention of providing tools for teachers who want to implement this methodology in the classroom, starting with a theoretical review, and then a description of a case in which they have worked this methodology for 5 years. We describe specific activities and ways of working with students, later reaching conclusions on the implementation of the methodology.

  13. Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Oztunali, O.I.; Roles, G.W.

    1986-01-01

    Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology.

  14. Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

    International Nuclear Information System (INIS)

    Oztunali, O.I.; Roles, G.W.

    1986-01-01

    Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology

  15. UNCOMMON SENSORY METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    Vladimír Vietoris

    2015-02-01

    Full Text Available Sensory science is the young but the rapidly developing field of the food industry. Actually, the great emphasis is given to the production of rapid techniques of data collection, the difference between consumers and trained panel is obscured and the role of sensory methodologists is to prepare the ways for evaluation, by which a lay panel (consumers can achieve identical results as a trained panel. Currently, there are several conventional methods of sensory evaluation of food (ISO standards, but more sensory laboratories are developing methodologies that are not strict enough in the selection of evaluators, their mechanism is easily understandable and the results are easily interpretable. This paper deals with mapping of marginal methods used in sensory evaluation of food (new types of profiles, CATA, TDS, napping.

  16. Endorsement of Models Describing Sexual Response of Men and Women with a Sexual Partner

    DEFF Research Database (Denmark)

    Giraldi, Annamaria; Kristensen, Ellids; Sand, Michael

    2015-01-01

    , erectile dysfunction and dissatisfaction with sexual life were significantly related to endorsement of the Basson model or none of the models (P = 0.01). CONCLUSIONS: No single model of sexual response could describe men's and women's sexual responses. The majority of men and women with no sexual......INTRODUCTION: Several models have been used to describe men's and women's sexual responses. These models have been conceptualized as linear or circular models. The circular models were proposed to describe women's sexual function best. AIM: This study aims to determine whether men and women thought...... that current theoretical models of sexual responses accurately reflected their own sexual experience and to what extent this was influenced by sexual dysfunction. METHODS: A cross-sectional study of a large, broadly sampled, nonclinical population, cohort of Danish men and women. The Female Sexual Function...

  17. Situating methodology within qualitative research.

    Science.gov (United States)

    Kramer-Kile, Marnie L

    2012-01-01

    Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

  18. Methodology for uncertainty estimation of Hanford tank chemical and radionuclide inventories and concentrations

    International Nuclear Information System (INIS)

    Chen, G.; Ferryman, T.A.; Remund, K.M.

    1998-02-01

    The exact physical and chemical nature of 55 million gallons of toxic waste held in 177 underground waste tanks at the Hanford Site is not known with sufficient detail to support the safety, retrieval, and immobilization missions presented to Hanford. The Hanford Best Basis team has made point estimates of the inventories in each tank. The purpose of this study is to estimate probability distributions for each of the 71 analytes and 177 tanks that the Hanford Best Basis team has made point estimates for. This will enable uncertainty intervals to be calculated for the Best Basis inventories and should facilitate the safety, retrieval, and immobilization missions. Section 2 of this document describes the overall approach used to estimate tank inventory uncertainties. Three major components are considered in this approach: chemical concentration, density, and waste volume. Section 2 also describes the two different methods used to evaluate the tank wastes in terms of sludges and in terms of supernatant or saltcakes. Sections 3 and 4 describe in detail the methodology to assess the probability distributions for each of the three components, as well as the data sources for implementation. The conclusions are given in Section 5

  19. Ultra wideband antennas design, methodologies, and performance

    CERN Document Server

    Galvan-Tejada, Giselle M; Jardón Aguilar, Hildeberto

    2015-01-01

    Ultra Wideband Antennas: Design, Methodologies, and Performance presents the current state of the art of ultra wideband (UWB) antennas, from theory specific for these radiators to guidelines for the design of omnidirectional and directional UWB antennas. Offering a comprehensive overview of the latest UWB antenna research and development, this book:Discusses the developed theory for UWB antennas in frequency and time domainsDelivers a brief exposition of numerical methods for electromagnetics oriented to antennasDescribes solid-planar equivalen

  20. Applicability of the Directed Graph Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Huszti, Jozsef [Institute of Isotope of the Hungarian Academy of Sciences, Budapest (Hungary); Nemeth, Andras [ESRI Hungary, Budapest (Hungary); Vincze, Arpad [Hungarian Atomic Energy Authority, Budapest (Hungary)

    2012-06-15

    Possible methods to construct, visualize and analyse the 'map' of the State's nuclear infrastructure based on different directed graph approaches are proposed. The transportation and the flow network models are described in detail. The use of the possible evaluation methodologies and the use of available software tools to construct and maintain the nuclear 'map' using pre-defined standard building blocks (nuclear facilities) are introduced and discussed.

  1. Safety on Judo Children: Methodology and Results

    OpenAIRE

    Sacripanti, Attilio; De Blasis, Tania

    2017-01-01

    Many doctors although they have not firsthand experience of judo, describe it as a sport unsuitable for children. Theoretically speaking falls derived by Judo throwing techniques,could be potentially dangerous,especially for kids,if poorly managed.A lot of researches were focalized on trauma or injuries taking place in judo, both during training and competition The goal of this Research is to define and apply a scientific methodology to evaluate the hazard in falls by judo throws for children...

  2. The sign language skills classroom observation: a process for describing sign language proficiency in classroom settings.

    Science.gov (United States)

    Reeves, J B; Newell, W; Holcomb, B R; Stinson, M

    2000-10-01

    In collaboration with teachers and students at the National Technical Institute for the Deaf (NTID), the Sign Language Skills Classroom Observation (SLSCO) was designed to provide feedback to teachers on their sign language communication skills in the classroom. In the present article, the impetus and rationale for development of the SLSCO is discussed. Previous studies related to classroom signing and observation methodology are reviewed. The procedure for developing the SLSCO is then described. This procedure included (a) interviews with faculty and students at NTID, (b) identification of linguistic features of sign language important for conveying content to deaf students, (c) development of forms for recording observations of classroom signing, (d) analysis of use of the forms, (e) development of a protocol for conducting the SLSCO, and (f) piloting of the SLSCO in classrooms. The results of use of the SLSCO with NTID faculty during a trial year are summarized.

  3. A methodology for creating ontologies for engineering design

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Kim, S.; Wallace, K.M.

    2007-01-01

    This paper describes a six-stage methodology for developing ontologies for engineering design, together with the research methods and evaluation of each stage. The methodology focuses upon understanding a user's domain models through empirical research. A case study of an ontology for searching......, indexing, and retrieving engineering knowledge is described. The root concepts of the ontology were elicited from engineering designers. Relationships between concepts are extracted as the ontology is populated. The contribution of this research is a methodology to allow researchers. and industry to create...... ontologies for their particular purpose and a thesaurus for the terms within the ontology....

  4. Validation of mathematical models to describe fluid dynamics of a cold riser by gamma ray attenuation

    International Nuclear Information System (INIS)

    Melo, Ana Cristina Bezerra Azedo de

    2004-12-01

    The fluid dynamic behavior of a riser in a cold type FCC model was investigated by means of catalyst concentration distribution measured with gamma attenuation and simulated with a mathematical model. In the riser of the cold model, MEF, 0,032 m in diameter, 2,30 m in length the fluidized bed, whose components are air and FCC catalyst, circulates. The MEF is operated by automatic control and instruments for measuring fluid dynamic variables. An axial catalyst concentration distribution was measured using an Am-241 gamma source and a NaI detector coupled to a multichannel provided with a software for data acquisition and evaluation. The MEF was adapted for a fluid dynamic model validation which describes the flow in the riser, for example, by introducing an injector for controlling the solid flow in circulation. Mathematical models were selected from literature, analyzed and tested to simulate the fluid dynamic of the riser. A methodology for validating fluid dynamic models was studied and implemented. The stages of the work were developed according to the validation methodology, such as data planning experiments, study of the equations which describe the fluidodynamic, computational solvers application and comparison with experimental data. Operational sequences were carried out keeping the MEF conditions for measuring catalyst concentration and simultaneously measuring the fluid dynamic variables, velocity of the components and pressure drop in the riser. Following this, simulated and experimental values were compared and statistical data treatment done, aiming at the required precision to validate the fluid dynamic model. The comparison tests between experimental and simulated data were carried out under validation criteria. The fluid dynamic behavior of the riser was analyzed and the results and the agreement with literature were discussed. The adopt model was validated under the MEF operational conditions, for a 3 to 6 m/s gas velocity in the riser and a slip

  5. Generation of cross-sections and reference solutions using the code Serpent

    International Nuclear Information System (INIS)

    Gomez T, A. M.; Delfin L, A.; Del Valle G, E.

    2012-10-01

    Serpent is a code that solves the neutron transport equations using the Monte Carlo method that besides generating reference solutions in stationary state for complex geometry problems, has been specially designed for physical applications of cells, what includes the generation of homogenized cross-sections for several energy groups. In this work a calculation methodology is described using the code Serpent to generate the necessary cross-sections to carry out calculations with the code TNXY, developed in 1993 in the Nuclear Engineering Department of the Instituto Politecnico Nacional (Mexico) by means of an interface programmed in Octave. The computation program TNXY solves the neutron transport equations for several energy groups in stationary state and geometry X Y using the Discreet Ordinates method (S N ). To verify and to validate the methodology the results of TNXY were compared with those calculated by Serpent giving minor differences to 0.55% in the value of the multiplication factor. (Author)

  6. Radionuclide transverse section imager

    International Nuclear Information System (INIS)

    Stoddart, H.F.

    1980-01-01

    A radioisotope scanning apparatus for use in nuclear medicine is described in detail. The apparatus enables the quantification and spatial location of the radioactivity in a body section of a patient to be determined with high sensitivity. It consists of an array of highly focussed collimators arranged such that adjacent collimators move in the same circumferential but opposite radial directions. The explicit movements of the gantry are described in detail and may be controlled by a general purpose computer. The use of highly focussed collimators allows both a reasonable solid angle of acceptance and also high target to background images; additionally, dual radionuclide pharmaceutical studies can be performed simultaneously. It is claimed that the high sensitivity of the system permits the early diagnosis of pathological changes and the images obtained show accurately the location and shape of physiological abnormalities. (UK)

  7. Methodological Problems of Nanotechnoscience

    Science.gov (United States)

    Gorokhov, V. G.

    Recently, we have reported on the definitions of nanotechnology as a new type of NanoTechnoScience and on the nanotheory as a cluster of the different natural and engineering theories. Nanotechnology is not only a new type of scientific-engineering discipline, but it evolves also in a “nonclassical” way. Nanoontology or nano scientific world view has a function of the methodological orientation for the choice the theoretical means and methods toward a solution to the scientific and engineering problems. This allows to change from one explanation and scientific world view to another without any problems. Thus, nanotechnology is both a field of scientific knowledge and a sphere of engineering activity, in other words, NanoTechnoScience is similar to Systems Engineering as the analysis and design of large-scale, complex, man/machine systems but micro- and nanosystems. Nano systems engineering as well as Macro systems engineering includes not only systems design but also complex research. Design orientation has influence on the change of the priorities in the complex research and of the relation to the knowledge, not only to “the knowledge about something”, but also to the knowledge as the means of activity: from the beginning control and restructuring of matter at the nano-scale is a necessary element of nanoscience.

  8. Methodological themes and variations

    International Nuclear Information System (INIS)

    Tetlock, P.E.

    1989-01-01

    This paper reports on the tangible progress that has been made in clarifying the underlying processes that affect both the likelihood of war in general and of nuclear war in particular. It also illustrates how difficult it is to make progress in this area. Nonetheless, what has been achieved should not be minimized. We have learned a good deal on both the theoretical and the methodological fronts and, perhaps, most important, we have learned a good deal about the limits of our knowledge. Knowledge of our ignorance---especially in a policy domain where confident, even glib, causal assertions are so common---can be a major contribution in itself. The most important service the behavioral and social sciences can currently provide to the policy making community may well be to make thoughtful skepticism respectable: to sensitize those who make key decisions to the uncertainty surrounding our understanding of international conflict and to the numerous qualifications that now need to be attached to simple causal theories concerning the origins of war

  9. Engineering radioecology: Methodological considerations

    International Nuclear Information System (INIS)

    Nechaev, A.F.; Projaev, V.V.; Sobolev, I.A.; Dmitriev, S.A.

    1995-01-01

    The term ''radioecology'' has been widely recognized in scientific and technical societies. At the same time, this scientific school (radioecology) does not have a precise/generally acknowledged structure, unified methodical basis, fixed subjects of investigation, etc. In other words, radioecology is a vast, important but rather amorphous conglomerate of various ideas, amalgamated mostly by their involvement in biospheric effects of ionizing radiation and some conceptual stereotypes. This paradox was acceptable up to a certain time. However, with the termination of the Cold War and because of remarkable political changes in the world, it has become possible to convert the problem of environmental restoration from the scientific sphere in particularly practical terms. Already the first steps clearly showed an imperfection of existing technologies, managerial and regulatory schemes; lack of qualified specialists, relevant methods and techniques; uncertainties in methodology of decision-making, etc. Thus, building up (or maybe, structuring) of special scientific and technological basis, which the authors call ''engineering radioecology'', seems to be an important task. In this paper they endeavored to substantiate the last thesis and to suggest some preliminary ideas concerning the subject matter of engineering radioecology

  10. Verbal protocols as methodological resources: research evidence

    Directory of Open Access Journals (Sweden)

    Alessandra Baldo

    2012-01-01

    Full Text Available This article aims at reflecting on the use of verbal protocols as a methodological resource in qualitative research, more specifically on the aspect regarded as the main limitation of a study about lexical inferencing in L2 (BALDO; VELASQUES, 2010: its subjective trait. The article begins with a brief literature review on protocols, followed by a description of the study in which they were employed as methodological resources. Based on that, protocol subjectivity is illustrated through samples of unparalleled data classification, carried out independently by two researchers. In the final section, the path followed to minimize the problem is presented, intending to contribute to improve efficiency in the use of verbal protocols in future research.

  11. Methodology for combining dynamic responses. Technical report

    International Nuclear Information System (INIS)

    Mattu, R.K.

    1980-05-01

    Procedures in accordance with Appendix A of 10 CFR 50, GDC 2, call for an appropriate combination of the effects of the accident loads and loads caused by natural phenomena (such as earthquakes) to be reflected in the design bases of safety equipment. This requirement of interaction of loads has been implemented in various ways both within the NRC and the Nuclear Industry. An NRR Working Group constituted to examine load combination methodologies developed recommendations which were published in September 1978 as NUREG-0484, (PB-287 432). Revision 1 of NUREG-0484 extends the conclusions of the original NUREG-0484 on the use of SRSS methodology for the combination of SSE and LOCA responses beyond RCPB to any other ASME Section III, Class 1, 2, or 3 affected system, component or support, and provides criteria for the combination of dynamic responses other than SSE and LOCA

  12. Describing Case Study Method and Identifying the Factors that Contribute to the Successful Conduct of Case Studies

    OpenAIRE

    Ahmad H. Juma'h; Mustafa Cavus

    2001-01-01

    This article has attempted to describe case study, the limitations and critiques on case study methodology and how the proponents have responded to these. Our special focus have been on the debate on theory building from case study research, and a framework for conducting case study research as well as the factors for a successful case study research. The overall conclusion is that the case study has been inappropriately used to generate theories.

  13. Dosimetric methodology of the ICRP

    International Nuclear Information System (INIS)

    Eckerman, K.F.

    1994-01-01

    Establishment of guidance for the protection of workers and members of the public from radiation exposures necessitates estimation of the radiation dose to tissues of the body at risk. The dosimetric methodology formulated by the International Commission on Radiological Protection (ICRP) is intended to be responsive to this need. While developed for radiation protection, elements of the methodology are often applied in addressing other radiation issues; e.g., risk assessment. This chapter provides an overview of the methodology, discusses its recent extension to age-dependent considerations, and illustrates specific aspects of the methodology through a number of numerical examples

  14. Microbiological Methodology in Astrobiology

    Science.gov (United States)

    Abyzov, S. S.; Gerasimenko, L. M.; Hoover, R. B.; Mitskevich, I. N.; Mulyukin, A. L.; Poglazova, M. N.; Rozanov, A. Y.

    2005-01-01

    Searching for life in astromaterials to be delivered from the future missions to extraterrestrial bodies is undoubtedly related to studies of the properties and signatures of living microbial cells and microfossils on Earth. As model terrestrial analogs of Martian polar subsurface layers are often regarded the Antarctic glacier and Earth permafrost habitats where alive microbial cells preserved viability for millennia years due to entering the anabiotic state. For the future findings of viable microorganisms in samples from extraterrestrial objects, it is important to use a combined methodology that includes classical microbiological methods, plating onto nutrient media, direct epifluorescence and electron microscopy examinations, detection of the elemental composition of cells, radiolabeling techniques, PCR and FISH methods. Of great importance is to ensure authenticity of microorganisms (if any in studied samples) and to standardize the protocols used to minimize a risk of external contamination. Although the convincing evidence of extraterrestrial microbial life will may come from the discovery of living cells in astromaterials, biomorphs and microfossils must also be regarded as a target in search of life evidence bearing in mind a scenario that alive microorganisms had not be preserved and underwent mineralization. Under the laboratory conditions, processes that accompanied fossilization of cyanobacteria were reconstructed, and artificially produced cyanobacterial stromatolites resembles by their morphological properties those found in natural Earth habitats. Regarding the vital importance of distinguishing between biogenic and abiogenic signatures and between living and fossil microorganisms in analyzed samples, it is worthwhile to use some previously developed approaches based on electron microscopy examinations and analysis of elemental composition of biomorphs in situ and comparison with the analogous data obtained for laboratory microbial cultures and

  15. Kaupapa Maori Methodology: Trusting the Methodology through Thick and Thin

    Science.gov (United States)

    Hiha, Anne Aroha

    2016-01-01

    Kaupapa Maori is thoroughly theorised in academia in Aotearoa and those wishing to use it as their research methodology can find support through the writing of a number of Maori academics. What is not so well articulated, is the experiential voice of those who have used Kaupapa Maori as research methodology. My identity as a Maori woman…

  16. Examining emotional expressions in discourse: methodological considerations

    Science.gov (United States)

    Hufnagel, Elizabeth; Kelly, Gregory J.

    2017-10-01

    This methodological paper presents an approach for examining emotional expressions through discourse analysis and ethnographic methods. Drawing on trends in the current literature in science education, we briefly explain the importance of emotions in science education and examine the current research methodologies used in interactional emotion studies. We put forth and substantiate a methodological approach that attends to the interactional, contextual, intertextual, and consequential aspects of emotional expressions. By examining emotional expressions in the discourse in which they are constructed, emotional expressions are identified through semantics, contextualization, and linguistic features. These features make salient four dimensions of emotional expressions: aboutness, frequency, type, and ownership. Drawing on data from a large empirical study of pre-service elementary teachers' emotional expressions about climate change in a science course, we provide illustrative examples to describe what counts as emotional expressions in situ. In doing so we explain how our approach makes salient the nuanced nature of such expressions as well as the broader discourse in which they are constructed and the implications for researching emotional expressions in science education discourse. We suggest reasons why this discourse orientated research methodology can contribute to the interactional study of emotions in science education contexts.

  17. Study of methodology diversification in diagnostics

    International Nuclear Information System (INIS)

    Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Hasegawa, Makoto

    1999-03-01

    There are several research activities to enhance safety and reliability of nuclear power plant operation and maintenance. We are developing a concept of an autonomous operation system where the role of operators is replaced with artificial intelligence. The purpose of the study described in this report is to develop a operator support system in abnormal plant situations. Conventionally, diagnostic modules based on individual methodology such as expert system have been developed and verified. In this report, methodology diversification is considered to integrate diagnostic modules which performance are confirmed using information processing technique. Technical issues to be considered in diagnostic methodology diversification are; 1)reliability of input data, 2)diversification of knowledge models, algorithms and reasoning schemes, 3)mutual complement and robustness. The diagnostic module utilizing the different approaches defined along with strategy of diversification was evaluated using fast breeder plant simulator. As a result, we confirmed that any singular diagnostic module can not meet accuracy criteria for the entire set of anomaly events. In contrast with this, we confirmed that every abnormality could be precisely diagnosed by a mutual combination. In other words, legitimacy of approach selected by strategy of diversification was shown, and methodology diversification attained clear efficiency for abnormal diagnosis. It has been also confirmed that the diversified diagnostic system implemented in this study is able to maintain its accuracy even in case that encountered scale of abnormality is different from reference cases embedded in the knowledge base. (author)

  18. Three-dimensional RAMA fluence methodology benchmarking

    International Nuclear Information System (INIS)

    Baker, S. P.; Carter, R. G.; Watkins, K. E.; Jones, D. B.

    2004-01-01

    This paper describes the benchmarking of the RAMA Fluence Methodology software, that has been performed in accordance with U. S. Nuclear Regulatory Commission Regulatory Guide 1.190. The RAMA Fluence Methodology has been developed by TransWare Enterprises Inc. through funding provided by the Electric Power Research Inst., Inc. (EPRI) and the Boiling Water Reactor Vessel and Internals Project (BWRVIP). The purpose of the software is to provide an accurate method for calculating neutron fluence in BWR pressure vessels and internal components. The Methodology incorporates a three-dimensional deterministic transport solution with flexible arbitrary geometry representation of reactor system components, previously available only with Monte Carlo solution techniques. Benchmarking was performed on measurements obtained from three standard benchmark problems which include the Pool Criticality Assembly (PCA), VENUS-3, and H. B. Robinson Unit 2 benchmarks, and on flux wire measurements obtained from two BWR nuclear plants. The calculated to measured (C/M) ratios range from 0.93 to 1.04 demonstrating the accuracy of the RAMA Fluence Methodology in predicting neutron flux, fluence, and dosimetry activation. (authors)

  19. Describing control

    International Nuclear Information System (INIS)

    Fouet, J.M.; Starynkevitch, B.

    1987-01-01

    Incremental development and maintenance of large systems imply that control be clearly separated from knowledge. Finding efficient control for a given class of knowledge is itself a matter of expertise, to which knowledge-based methods may and should be applied. We present here two attempts at building root systems that may later be tuned by knowledge engineers, using the semantics of each particular application. These systems are given heuristics in a declarative manner, which they use to control the application of heuristics. Eventually, some heuristics may be used to compile others (or themselves) into efficient pieces of programmed code

  20. Relative Hazard and Risk Measure Calculation Methodology Rev 1

    International Nuclear Information System (INIS)

    Stenner, Robert D.; White, Michael K.; Strenge, Dennis L.; Aaberg, Rosanne L.; Andrews, William B.

    2000-01-01

    to produce the graphic illustrations showing the relative hazard and risk reductions that occur as a result of a site's projected risk management actions. The evaluation of relative hazard values is described and illustrated first (Sections 2 and 3) followed by the risk measure evaluations (Sections 4 and 5)

  1. Econometric Analysis of 2003 Data on the Post-Service Earnings of Military Retirees: Methodology Report

    National Research Council Canada - National Science Library

    Mackin, Patrick C; Darling, Kimberly L

    2004-01-01

    ...). This report details how the estimation datasets were constructed from these two data sources and describes the econometric methodology in detail, including the definition of alternative models...

  2. Methodology for plastic fracture - a progress report

    International Nuclear Information System (INIS)

    Wilkinson, J.P.D.; Smith, R.E.E.

    1977-01-01

    This paper describes the progress of a study to develop a methodology for plastic fracture. Such a fracture mechanics methodology, having application in the plastic region, is required to assess the margin of safety inherent in nuclear reactor pressure vessels. The initiation and growth of flaws in pressure vessels under overload conditions is distinguished by a number of unique features, such as large scale yielding, three-dimensional structural and flaw configurations, and failure instabilities that may be controlled by either toughness or plastic flow. In order to develop a broadly applicable methodology of plastic fracture, these features require the following analytical and experimental studies: development of criteria for crack initiation and growth under large scale yielding; the use of the finite element method to describe elastic-plastic behaviour of both the structure and the crack tip region; and extensive experimental studies on laboratory scale and large scale specimens, which attempt to reproduce the pertinent plastic flow and crack growth phenomena. This discussion centers on progress to date on the selection, through analysis and laboratory experiments, of viable criteria for crack initiation and growth during plastic fracture. (Auth.)

  3. A survey of cross-section sensitivity analysis as applied to radiation shielding

    International Nuclear Information System (INIS)

    Goldstein, H.

    1977-01-01

    Cross section sensitivity studies revolve around finding the change in the value of an integral quantity, e.g. transmitted dose, for a given change in one of the cross sections. A review is given of the principal methodologies for obtaining the sensitivity profiles-principally direct calculations with altered cross sections, and linear perturbation theory. Some of the varied applications of cross section sensitivity analysis are described, including the practice, of questionable value, of adjusting input cross section data sets so as to provide agreement with integral experiments. Finally, a plea is made for using cross section sensitivity analysis as a powerful tool for analysing the transport mechanisms of particles in radiation shields and for constructing models of how cross section phenomena affect the transport. Cross section sensitivities in the shielding area have proved to be highly problem-dependent. Without the understanding afforded by such models, it is impossible to extrapolate the conclusions of cross section sensitivity analysis beyond the narrow limits of the specific situations examined in detail. Some of the elements that might be of use in developing the qualitative models are presented. (orig.) [de

  4. A methodology for social experimentation

    DEFF Research Database (Denmark)

    Ravn, Ib

    A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations......A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations...

  5. Workshops as a Research Methodology

    Science.gov (United States)

    Ørngreen, Rikke; Levinsen, Karin

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

  6. Methodological Pluralism and Narrative Inquiry

    Science.gov (United States)

    Michie, Michael

    2013-01-01

    This paper considers how the integral theory model of Nancy Davis and Laurie Callihan might be enacted using a different qualitative methodology, in this case the narrative methodology. The focus of narrative research is shown to be on "what meaning is being made" rather than "what is happening here" (quadrant 2 rather than…

  7. Building ASIPS the Mescal methodology

    CERN Document Server

    Gries, Matthias

    2006-01-01

    A number of system designers use ASIP's rather than ASIC's to implement their system solutions. This book gives a comprehensive methodology for the design of these application-specific instruction processors (ASIPs). It includes demonstrations of applications of the methodologies using the Tipi research framework.

  8. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  9. Risk-based Regulatory Evaluation Program methodology

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Sanders, G.A.; Carlson, D.D.; Asselin, S.V.

    1987-01-01

    The objectives of this DOE-supported Regulatory Evaluation Progrwam are to analyze and evaluate the safety importance and economic significance of existing regulatory guidance in order to assist in the improvement of the regulatory process for current generation and future design reactors. A risk-based cost-benefit methodology was developed to evaluate the safety benefit and cost of specific regulations or Standard Review Plan sections. Risk-based methods can be used in lieu of or in combination with deterministic methods in developing regulatory requirements and reaching regulatory decisions

  10. Methodology of shell structure reinforcement layout optimization

    Science.gov (United States)

    Szafrański, Tomasz; Małachowski, Jerzy; Damaziak, Krzysztof

    2018-01-01

    This paper presents an optimization process of a reinforced shell diffuser intended for a small wind turbine (rated power of 3 kW). The diffuser structure consists of multiple reinforcement and metal skin. This kind of structure is suitable for optimization in terms of selection of reinforcement density, stringers cross sections, sheet thickness, etc. The optimisation approach assumes the reduction of the amount of work to be done between the optimization process and the final product design. The proposed optimization methodology is based on application of a genetic algorithm to generate the optimal reinforcement layout. The obtained results are the basis for modifying the existing Small Wind Turbine (SWT) design.

  11. Resonance analysis and evaluation of the 235U neutron induced cross sections

    International Nuclear Information System (INIS)

    Leal, L.C.

    1990-06-01

    Neutron cross sections of fissile nuclei are of considerable interest for the understanding of parameters such as resonance absorption, resonance escape probability, resonance self-shielding,and the dependence of the reactivity on temperature. In the present study, new techniques for the evaluation of the 235 U neutron cross sections are described. The Reich-Moore formalism of the Bayesian computer code SAMMY was used to perform consistent R-matrix multilevel analyses of the selected neutron cross-section data. The Δ 3 -statistics of Dyson and Mehta, along with high-resolution data and the spin-separated fission cross-section data, have provided the possibility of developing a new methodology for the analysis and evaluation of neutron-nucleus cross sections. The results of the analysis consists of a set of resonance parameters which describe the 235 U neutron cross sections up to 500 eV. The set of resonance parameters obtained through a R-matrix analysis are expected to satisfy statistical properties which lead to information on the nuclear structure. The resonance parameters were tested and showed good agreement with the theory. It is expected that the parametrization of the 235 U neutron cross sections obtained in this dissertation represents the current state of art in data as well as in theory and, therefore, can be of direct use in reactor calculations. 44 refs., 21 figs., 8 tabs

  12. The main aspects of methodology of quality management system

    Directory of Open Access Journals (Sweden)

    Smirnova E.K.

    2017-03-01

    Full Text Available this article describes the formation and development of quality management as an integrated system. The author considers the theory and methodology of quality management since the early XXth century to the present day and describes the main problems encountered in the process of quality management system, as well as the ways to overcome them.

  13. Methodology for characterizing potential adversaries of Nuclear Material Safeguards Systems

    International Nuclear Information System (INIS)

    Kirkwood, C.W.; Pollock, S.M.

    1978-11-01

    The results are described of a study by Woodward--Clyde Consultants to assist the University of California Lawrence Livermore Laboratory in the development of methods to analyze and evaluate Nuclear Material Safeguards (NMS) Systems. The study concentrated on developing a methodology to assist experts in describing, in quantitative form, their judgments about the characteristics of potential adversaries of NMS Systems

  14. Methodology for characterizing potential adversaries of Nuclear Material Safeguards Systems

    Energy Technology Data Exchange (ETDEWEB)

    Kirkwood, C.W.; Pollock, S.M.

    1978-11-01

    The results are described of a study by Woodward--Clyde Consultants to assist the University of California Lawrence Livermore Laboratory in the development of methods to analyze and evaluate Nuclear Material Safeguards (NMS) Systems. The study concentrated on developing a methodology to assist experts in describing, in quantitative form, their judgments about the characteristics of potential adversaries of NMS Systems.

  15. Novel insights into early neuroanatomical evolution in penguins from the oldest described penguin brain endocast.

    Science.gov (United States)

    Proffitt, J V; Clarke, J A; Scofield, R P

    2016-08-01

    Digital methodologies for rendering the gross morphology of the brain from X-ray computed tomography data have expanded our current understanding of the origin and evolution of avian neuroanatomy and provided new perspectives on the cognition and behavior of birds in deep time. However, fossil skulls germane to extracting digital endocasts from early stem members of extant avian lineages remain exceptionally rare. Data from early-diverging species of major avian subclades provide key information on ancestral morphologies in Aves and shifts in gross neuroanatomical structure that have occurred within those groups. Here we describe data on the gross morphology of the brain from a mid-to-late Paleocene penguin fossil from New Zealand. This most basal and geochronologically earliest-described endocast from the penguin clade indicates that described neuroanatomical features of early stem penguins, such as lower telencephalic lateral expansion, a relatively wider cerebellum, and lack of cerebellar folding, were present far earlier in penguin history than previously inferred. Limited dorsal expansion of the wulst in the new fossil is a feature seen in outgroup waterbird taxa such as Gaviidae (Loons) and diving Procellariiformes (Shearwaters, Diving Petrels, and allies), indicating that loss of flight may not drastically affect neuroanatomy in diving taxa. Wulst enlargement in the penguin lineage is first seen in the late Eocene, at least 25 million years after loss of flight and cooption of the flight stroke for aquatic diving. Similar to the origin of avian flight, major shifts in gross brain morphology follow, but do not appear to evolve quickly after, acquisition of a novel locomotor mode. Enlargement of the wulst shows a complex pattern across waterbirds, and may be linked to sensory modifications related to prey choice and foraging strategy. © 2016 Anatomical Society.

  16. Application of PRINCE2 Project Management Methodology

    Directory of Open Access Journals (Sweden)

    Vaníčková Radka

    2017-09-01

    Full Text Available The methodology describes the principle of setting a project in PRINCE2 project management. The main aim of the paper is to implement PRINCE2 methodology to be used in an enterprise in the service industry. A partial aim is to choose a supplier of the project among new travel guides. The result of the project activity is a sight-seeing tour/service more attractive for customers in the tourism industry and a possible choice of new job opportunities. The added value of the article is the description of applying the principles, processes and topics of PRINCE2 project management so that they might be used in the field.

  17. Case Study Methodology and Homelessness Research

    Directory of Open Access Journals (Sweden)

    Jill Pable

    2013-10-01

    Full Text Available This paper describes the potential suitability of case study methodology for inquiry with the homeless population. It references a research study that uses case study research method to build theory. This study's topic is the lived experience of destitute individuals who reside in homeless shelters, and explores the homeless shelter built environment's potential influence on resident satisfaction and recovery. Case study methodology may be appropriate because it explores real-life contextual issues that characterize homelessness and can also accommodate the wide range of homeless person demographics that make this group difficult to study in a generalized fashion. Further, case study method accommodates the need within research in this area to understand individualized treatments as a potential solution for homelessness.

  18. Argumentation: A Methodology to Facilitate Critical Thinking.

    Science.gov (United States)

    Makhene, Agnes

    2017-06-20

    Caring is a difficult nursing activity that involves a complex nature of a human being in need of complex decision-making and problem solving through the critical thinking process. It is mandatory that critical thinking is facilitated in general and in nursing education particularly in order to render care in diverse multicultural patient care settings. This paper aims to describe how argumentation can be used to facilitate critical thinking in learners. A qualitative, exploratory and descriptive design that is contextual was used. Purposive sampling method was used to draw a sample and Miles and Huberman methodology of qualitative analysis was used to analyse data. Lincoln and Guba's strategies were employed to ensure trustworthiness, while Dhai and McQuoid-Mason's principles of ethical consideration were used. Following data analysis the findings were integrated within literature which culminated into the formulation of guidelines that can be followed when using argumentation as a methodology to facilitate critical thinking.

  19. Proposed Methodology for Establishing Area of Applicability

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Hopper, C.M.; Parks, C.V.

    1999-01-01

    This paper presents the application of sensitivity and uncertainty (S/U) analysis methodologies to the data validation tasks of a criticality safety computational study. The S/U methods presented are designed to provide a formal means of establishing the area (or range) of applicability for criticality safety data validation studies. The development of parameters that are analogous to the standard trending parameters form the key to the technique. These parameters are the so-called D parameters, which represent the differences by energy group of S/U-generated sensitivity profiles, and c parameters, which are the k correlation coefficients, each of which give information relative to the similarity between pairs of selected systems. The use of a Generalized Linear Least-Squares Methodology (GLLSM) tool is also described in this paper. These methods and guidelines are also applied to a sample validation for uranium systems with enrichments greater than 5 wt %

  20. Action research methodology in clinical pharmacy

    DEFF Research Database (Denmark)

    Nørgaard, Lotte Stig; Sørensen, Ellen Westh

    2016-01-01

    Introduction The focus in clinical pharmacy practice is and has for the last 30-35 years been on changing the role of pharmacy staff into service orientation and patient counselling. One way of doing this is by involving staff in change process and as a researcher to take part in the change process...... by establishing partnerships with staff. On the background of the authors' widespread action research (AR)-based experiences, recommendations and comments for how to conduct an AR-study is described, and one of their AR-based studies illustrate the methodology and the research methods used. Methodology AR...... is defined as an approach to research which is based on a problem-solving relationship between researchers and clients, which aims at both solving a problem and at collaboratively generating new knowledge. Research questions relevant in AR-studies are: what was the working process in this change oriented...

  1. AEGIS methodology and a perspective from AEGIS methodology demonstrations

    International Nuclear Information System (INIS)

    Dove, F.H.

    1981-03-01

    Objectives of AEGIS (Assessment of Effectiveness of Geologic Isolation Systems) are to develop the capabilities needed to assess the post-closure safety of waste isolation in geologic formation; demonstrate these capabilities on reference sites; apply the assessment methodology to assist the NWTS program in site selection, waste package and repository design; and perform repository site analyses for the licensing needs of NWTS. This paper summarizes the AEGIS methodology, the experience gained from methodology demonstrations, and provides an overview in the following areas: estimation of the response of a repository to perturbing geologic and hydrologic events; estimation of the transport of radionuclides from a repository to man; and assessment of uncertainties

  2. Evaluation methodology based on physical security assessment results: a utility theory approach

    International Nuclear Information System (INIS)

    Bennett, H.A.; Olascoaga, M.T.

    1978-03-01

    This report describes an evaluation methodology which aggregates physical security assessment results for nuclear facilities into an overall measure of adequacy. This methodology utilizes utility theory and conforms to a hierarchical structure developed by the NRC. Implementation of the methodology is illustrated by several examples. Recommendations for improvements in the evaluation process are given

  3. Milestone 4.1 ∙ First draft on complemented LCA methodology

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Olsen, Stig Irving; Hauschild, Michael Zwicky

    As described in deliverable 4.1, D4.1 (Larsen et al. 2007) NEPTUNE is using two main types of life cycle impact assessment (LCIA) methodologies when doing LCA studies on the waste water treatment technologies included. The basic methodology is the well known existing EDIP97 methodology (Wenzel et...

  4. Keratitis caused by the recently described new species Aspergillus brasiliensis: two case reports

    Directory of Open Access Journals (Sweden)

    Vágvölgyi Csaba

    2010-02-01

    Full Text Available Abstract Introduction Human infections caused by Aspergillus brasiliensis have not yet been reported. We describe the first two known cases of fungal keratitis caused by Aspergillus brasiliensis. Case presentations A 49-year-old Indian Tamil woman agricultural worker came with pain and defective vision in the right eye for one month. Meanwhile, a 35-year-old Indian Tamil woman presented with a history of a corneal ulcer involving the left eye for 15 days. The fungal strains isolated from these two cases were originally suspected to belong to Aspergillus section Nigri based on macro- and micromorphological characteristics. Molecular identification revealed that both isolates represent A. brasiliensis. Conclusion The two A. brasiliensis strains examined in this study were part of six keratitis isolates from Aspergillus section Nigri, suggesting that this recently described species may be responsible for a significant proportion of corneal infections caused by black Aspergilli. The presented cases also indicate that significant differences may occur between the severities of keratitis caused by individual isolates of A. brasiliensis.

  5. Using proliferation assessment methodologies for Safeguards-by-Design

    International Nuclear Information System (INIS)

    Van der Meer, K.; Rossa, R.; Turcanu, C.; Borella, A.

    2013-01-01

    MYRRHA, an accelerator driven system (ADS) is designed as a proton accelerator coupled to a liquid Pb-Bi spallation target, surrounded by a Pb-Bi cooled sub-critical neutron multiplying medium in a pool type configuration. An assessment based on three methodologies was made of the proliferation risks of the MYRRHA ADS in comparison with the BR2 MTR, an existing research reactor at the Belgian Nuclear Research Centre SCK-CEN. The used methodologies were the TOPS (Technical Opportunities to Increase the Proliferation Resistance of Nuclear Power Systems), the PR-PP and the INPRO methodologies. The various features of the methodologies are described and the results of the assessments are given and discussed. It is concluded that it would be useful to define one single methodology with two options to perform a quick and a more detailed assessment. The paper is followed by the slides of the presentation

  6. Networks as integrated in research methodologies in PER

    DEFF Research Database (Denmark)

    Bruun, Jesper

    2016-01-01

    of using networks to create insightful maps of learning discussions. To conclude, I argue that conceptual blending is a powerful framework for constructing "mixed methods" methodologies that may integrate diverse theories and other methodologies with network methodologies.......In recent years a number of researchers within the PER community have started using network analysis as a new methodology to extend our understanding of teaching and learning physics by viewing these as complex systems. In this paper, I give examples of social, cognitive, and action mapping...... networks and how they can be analyzed. In so doing I show how a network can be methodologically described as a set of relations between a set of entities, and how a network can be characterized and analyzed as a mathematical object. Then, as an illustrative example, I discuss a relatively new example...

  7. Empirical evaluation and justification of methodologies in psychological science.

    Science.gov (United States)

    Proctor, R W; Capaldi, E J

    2001-11-01

    The purpose of this article is to describe a relatively new movement in the history and philosophy of science, naturalism, a form of pragmatism emphasizing that methodological principles are empirical statements. Thus, methodological principles must be evaluated and justified on the same basis as other empirical statements. On this view, methodological statements may be less secure than the specific scientific theories to which they give rise. The authors examined the feasibility of a naturalistic approach to methodology using logical and historical analysis and by contrasting theories that predict new facts versus theories that explain already known facts. They provide examples of how differences over methodological issues in psychology and in science generally may be resolved using a naturalistic, or empirical, approach.

  8. Methodologies for problem identification and solution

    International Nuclear Information System (INIS)

    Drury, C.G.

    This paper describes a methodology for bringing together knowledge on how humans work (ergonomics) and knowledge on a particular system (operating experience), using the concept of the purposive human/machine system. A Task/Operator/Machine/Environment (TOME) system is one in which information from the machine is passed to the operator through displays and the machine receives information from the operator via controls. The human in the system can be described as a set of potentially limiting subsystems. When the muscular-skeletal, physiological, sensory, or attentional limitations of the human are exceeded one has a 'human failure'. The overloading of limiting subsystems may also be described as mismatches between task demands and human capabilities. Detection and analysis of human/system mismatches are central to solving man-machine problems

  9. Evolution of aging assessment methodologies

    International Nuclear Information System (INIS)

    McCrea, L.; Dam, R.; Gold, R.

    2011-01-01

    Under the influence of organizations like the IAEA and INPO the expectations of the regulator and plant operators alike are driving the evolution of aging assessment methodologies. The key result is that these assessments need to be executed more efficiently while supporting risk informed thinking within a living process. Some recent trends impacting aging assessments include new standards from the regulator requiring more frequent updates of aging assessments (RD-334), and broader component coverage driven by equipment reliability program demands (INPO AP-913). These trends point to the need to be able to do aging assessment more efficiently, and to manage the configuration. Some of the challenges include increasing efficiency while maintaining completeness and minimizing error, employing a systematic, well defined approach while maintaining the flexibility to apply the right level of effort to achieve desired results, and in particular, assuring that Aging Related Degradation Mechanisms (ARDMs) are sufficiently addressed. Meeting these needs creates a natural synergy with the Preventive Maintenance living program and therefore lends itself to a more integrated approach. To support this program, the SYSTMSTM software has been enhanced to accommodate for the various facets of an integrated program while meeting the needs described above. The systematic processes in SYSTMS are built with the vision of supporting risk-informed decision making as part of a larger risk-based functional tools suite. This paper intends to show how the utilities can benefit from the cost savings associated with increased assessment efficiency, and utilizing Candu Energy Inc.'s CANDU-specific knowledge-base and experience in aging assessment to get it right the first time. (author)

  10. Evolution of aging assessment methodologies

    Energy Technology Data Exchange (ETDEWEB)

    McCrea, L.; Dam, R.; Gold, R. [Candu Energy Inc., Mississauga, Ontario (Canada)

    2011-07-01

    Under the influence of organizations like the IAEA and INPO the expectations of the regulator and plant operators alike are driving the evolution of aging assessment methodologies. The key result is that these assessments need to be executed more efficiently while supporting risk informed thinking within a living process. Some recent trends impacting aging assessments include new standards from the regulator requiring more frequent updates of aging assessments (RD-334), and broader component coverage driven by equipment reliability program demands (INPO AP-913). These trends point to the need to be able to do aging assessment more efficiently, and to manage the configuration. Some of the challenges include increasing efficiency while maintaining completeness and minimizing error, employing a systematic, well defined approach while maintaining the flexibility to apply the right level of effort to achieve desired results, and in particular, assuring that Aging Related Degradation Mechanisms (ARDMs) are sufficiently addressed. Meeting these needs creates a natural synergy with the Preventive Maintenance living program and therefore lends itself to a more integrated approach. To support this program, the SYSTMSTM software has been enhanced to accommodate for the various facets of an integrated program while meeting the needs described above. The systematic processes in SYSTMS are built with the vision of supporting risk-informed decision making as part of a larger risk-based functional tools suite. This paper intends to show how the utilities can benefit from the cost savings associated with increased assessment efficiency, and utilizing Candu Energy Inc.'s CANDU-specific knowledge-base and experience in aging assessment to get it right the first time. (author)

  11. Derrida’s methodology

    Directory of Open Access Journals (Sweden)

    Chung Chin-Yi

    2017-12-01

    Full Text Available In this paper, I will be discussing Derrida’s reworking of metaphysics as history. Derrida describes history as the history of the metaphysical concept, where ontology delineated a strict division of the signified and the signifier, whereby the signified designated full presence to the signifier, which brings about a certain logocentrism. What this paper has done is show through Derrida that the signified is nothing outside the signifier and that it has to be relayed through time, history, and differance. This is a democratic move as it opens up possibilities for reading. By suggesting that meaning is not ossified and is not to be located outside the text but within the text, Derrida democratizes reading by suggesting that reading is an act of invention and that the possibilities for different readings are endless, where representation would hold you to an objective truth. This paper has shown that this history of the metaphysical concept as we know it, with transcendental and empirical strictly delineated and divided, has come to an end as there never has been anything but writing, meaning is located within the text rather than without, and the reader actively invents his reading instead of simply discovering an objective transcendental signified.

  12. Integral nucleus-nucleus cross sections

    International Nuclear Information System (INIS)

    Barashenkov, V.S.; Kumawat, H.

    2003-01-01

    Expressions approximating the experimental integral cross sections for elastic and inelastic interactions of light and heavy nuclei at the energies up to several GeV/nucleon are presented. The calculated cross sections are inside the corridor of experimental errors or very close to it. Described in detail FORTRAN code and a numerical example of the cross section approximation are also presented

  13. An extra-memetic empirical methodology to accompany theoretical memetics

    OpenAIRE

    Gill, Jameson

    2012-01-01

    Abstract\\ud \\ud Purpose: The paper describes the difficulties encountered by researchers who are looking to operationalise theoretical memetics and provides a methodological avenue for studies that can test meme theory.\\ud \\ud Design/Methodology/Approach: The application of evolutionary theory to organisations is reviewed by critically reflecting on the validity of its truth claims. To focus the discussion a number of applications of meme theory are reviewed to raise specific issues which oug...

  14. Methodology for eliciting, encoding and simulating human decision making behaviour

    OpenAIRE

    Rider, Conrad Edgar Scott

    2012-01-01

    Agent-based models (ABM) are an increasingly important research tool for describing and predicting interactions among humans and their environment. A key challenge for such models is the ability to faithfully represent human decision making with respect to observed behaviour. This thesis aims to address this challenge by developing a methodology for empirical measurement and simulation of decision making in humanenvironment systems. The methodology employs the Beliefs-Desires-I...

  15. Design methodology for wing trailing edge device mechanisms

    OpenAIRE

    Martins Pires, Rui Miguel

    2007-01-01

    Over the last few decades the design of high lift devices has become a very important part of the total aircraft design process. Reviews of the design process are performed on a regular basis, with the intent to improve and optimize the design process. This thesis describes a new and innovative methodology for the design and evaluation of mechanisms for Trailing Edge High-Lift devices. The initial research reviewed existing High-Lift device design methodologies and current f...

  16. 3-D SURVEY APPLIED TO INDUSTRIAL ARCHAEOLOGY BY TLS METHODOLOGY

    Directory of Open Access Journals (Sweden)

    M. Monego

    2017-05-01

    Full Text Available This work describes the three-dimensional survey of “Ex Stazione Frigorifera Specializzata”: initially used for agricultural storage, during the years it was allocated to different uses until the complete neglect. The historical relevance and the architectural heritage that this building represents has brought the start of a recent renovation project and functional restoration. In this regard it was necessary a global 3-D survey that was based on the application and integration of different geomatic methodologies (mainly terrestrial laser scanner, classical topography, and GNSS. The acquisitions of point clouds was performed using different laser scanners: with time of flight (TOF and phase shift technologies for the distance measurements. The topographic reference network, needed for scans alignment in the same system, was measured with a total station. For the complete survey of the building, 122 scans were acquired and 346 targets were measured from 79 vertices of the reference network. Moreover, 3 vertices were measured with GNSS methodology in order to georeference the network. For the detail survey of machine room were executed 14 scans with 23 targets. The 3-D global model of the building have less than one centimeter of error in the alignment (for the machine room the error in alignment is not greater than 6 mm and was used to extract products such as longitudinal and transversal sections, plans, architectural perspectives, virtual scans. A complete spatial knowledge of the building is obtained from the processed data, providing basic information for restoration project, structural analysis, industrial and architectural heritage valorization.

  17. Methodology of safety assessment for radioactive waste disposal

    International Nuclear Information System (INIS)

    Matsuzuru, Hideo; Kimura, Hideo

    1991-01-01

    The Japan Atomic Energy Research Institute (JAERI) is conducting an extensive R and D program to develop a safety assessment methodology to evaluate environmental consequences associated with geological disposal of a high-level radioactive waste, and also to elucidate a generic feasibility of the geological disposal in Japan. The paper describes the current R and D activities in the JAERI to develop an interim version of the methodology based on a normal evolution scenario, and also to validate models used in the methodology. (author)

  18. Measurements of neutron capture cross sections

    International Nuclear Information System (INIS)

    Nakajima, Yutaka

    1984-01-01

    A review of measurement techniques for the neutron capture cross sections is presented. Sell transmission method, activation method, and prompt gamma-ray detection method are described using examples of capture cross section measurements. The capture cross section of 238 U measured by three different prompt gamma-ray detection methods (large liquid scintillator, Moxon-Rae detector, and pulse height weighting method) are compared and their discrepancies are resolved. A method how to derive the covariance is described. (author)

  19. PLANNING VESSEL BODY SECTION PRODUCTION

    Directory of Open Access Journals (Sweden)

    A. G. Grivachevsky

    2015-01-01

    Full Text Available A problem of planning production of a vessel body section is considered. The problem is reduced to the classic Johnson’s tree-machine flow-shop scheduling problem. A genetic algorithm and computer experiment to compare efficiency of this algorithm and the algorithm of full enumeration are described.

  20. Dosimetry and Calibration Section

    International Nuclear Information System (INIS)

    Otto, T.

    1999-01-01

    The Dosimetry and Calibration Section fulfils two tasks within CERN's Radiation Protection Group: the Individual Dosimetry Service monitors more than 5000 persons potentially exposed to ionizing radiation on the CERN sites, and the Calibration Laboratory verifies throughout the year, at regular intervals, over 1000 instruments, monitors, and electronic dosimeters used by RP Group. The establishment of a Quality Assurance System for the Individual Dosimetry Service, a requirement of the new Swiss Ordinance for personal dosimetry, put a considerable workload on the section. Together with an external consultant it was decided to identify and then describe the different 'processes' of the routine work performed in the dosimetry service. The resulting Quality Manual was submitted to the Federal Office for Public Health in Bern in autumn. The CERN Individual Dosimetry Service will eventually be officially endorsed after a successful technical test in March 1999. On the technical side, the introduction of an automatic development machine for gamma films was very successful. It processes the dosimetric films without an operator being present, and its built-in regeneration mechanism keeps the concentration of the processing chemicals at a constant level

  1. Describing qualitative research undertaken with randomised controlled trials in grant proposals: a documentary analysis.

    Science.gov (United States)

    Drabble, Sarah J; O'Cathain, Alicia; Thomas, Kate J; Rudolph, Anne; Hewison, Jenny

    2014-02-18

    There is growing recognition of the value of conducting qualitative research with trials in health research. It is timely to reflect on how this qualitative research is presented in grant proposals to identify lessons for researchers and research commissioners. As part of a larger study focusing on how to maximise the value of undertaking qualitative research with trials, we undertook a documentary analysis of proposals of funded studies. Using the metaRegister of Controlled Trials (mRCT) database we identified trials funded in the United Kingdom, ongoing between 2001 and 2010, and reporting the use of qualitative research. We requested copies of proposals from lead researchers. We extracted data from the proposals using closed and open questions, analysed using descriptive statistics and content analysis respectively. 2% (89/3812) of trials in the mRCT database described the use of qualitative research undertaken with the trial. From these 89 trials, we received copies of 36 full proposals, of which 32 met our inclusion criteria. 25% used less than a single paragraph to describe the qualitative research. The aims of the qualitative research described in these proposals focused mainly on the intervention or trial conduct. Just over half (56%) of the proposals included an explicit rationale for conducting the qualitative research with the trial, the most frequent being to optimise implementation into clinical practice or to interpret trial findings. Key information about methods, expertise and resources was missing in a large minority of proposals, in particular sample size, type of analysis, and non-personnel resources. 28% specifically stated that qualitative researchers would conduct the qualitative research. Our review of proposals of successfully funded studies identified good practice but also identified limited space given to describing the qualitative research, with an associated lack of attention to the rationale for doing the qualitative research and

  2. Describing qualitative research undertaken with randomised controlled trials in grant proposals: a documentary analysis

    Science.gov (United States)

    2014-01-01

    Background There is growing recognition of the value of conducting qualitative research with trials in health research. It is timely to reflect on how this qualitative research is presented in grant proposals to identify lessons for researchers and research commissioners. As part of a larger study focusing on how to maximise the value of undertaking qualitative research with trials, we undertook a documentary analysis of proposals of funded studies. Methods Using the metaRegister of Controlled Trials (mRCT) database we identified trials funded in the United Kingdom, ongoing between 2001 and 2010, and reporting the use of qualitative research. We requested copies of proposals from lead researchers. We extracted data from the proposals using closed and open questions, analysed using descriptive statistics and content analysis respectively. Results 2% (89/3812) of trials in the mRCT database described the use of qualitative research undertaken with the trial. From these 89 trials, we received copies of 36 full proposals, of which 32 met our inclusion criteria. 25% used less than a single paragraph to describe the qualitative research. The aims of the qualitative research described in these proposals focused mainly on the intervention or trial conduct. Just over half (56%) of the proposals included an explicit rationale for conducting the qualitative research with the trial, the most frequent being to optimise implementation into clinical practice or to interpret trial findings. Key information about methods, expertise and resources was missing in a large minority of proposals, in particular sample size, type of analysis, and non-personnel resources. 28% specifically stated that qualitative researchers would conduct the qualitative research. Conclusions Our review of proposals of successfully funded studies identified good practice but also identified limited space given to describing the qualitative research, with an associated lack of attention to the rationale for

  3. Reflective Methodology: The Beginning Teacher

    Science.gov (United States)

    Templeton, Ronald K.; Siefert, Thomas E.

    1970-01-01

    Offers a variety of specific techniques which will help the beginning teacher to implement reflective methodology and create an inquiry-centered classroom atmosphere, at the same time meeting the many more pressing demands of first-year teaching. (JES)

  4. Muscle dysmorphia: methodological issues, implications for research.

    Science.gov (United States)

    Suffolk, Mark T; Dovey, Terence M; Goodwin, Huw; Meyer, Caroline

    2013-01-01

    Muscle dysmorphia is a male-dominated, body image-related psychological condition. Despite continued investigation, contention surrounds the nosological status of this disorder. The aim of this article was to review the literature on muscle dysmorphia to provide a qualitative account of methodological issues that may inhibit our understanding. Key areas relating to non-standardized participant groups, measuring instruments, and terminology were identified as potentially inhibiting symptom coherence and diagnostic reliability. New measuring instruments validated with clinical samples and carefully described participant groups, standardized terminology, and a greater emphasis on prospective longitudinal research with specific sub groups of the weight training community would be of interest to the field.

  5. Design methodology and projects for space engineering

    Science.gov (United States)

    Nichols, S.; Kleespies, H.; Wood, K.; Crawford, R.

    1993-01-01

    NASA/USRA is an ongoing sponsor of space design projects in the senior design course of the Mechanical Engineering Department at The University of Texas at Austin. This paper describes the UT senior design sequence, consisting of a design methodology course and a capstone design course. The philosophical basis of this sequence is briefly summarized. A history of the Department's activities in the Advanced Design Program is then presented. The paper concludes with a description of the projects completed during the 1991-92 academic year and the ongoing projects for the Fall 1992 semester.

  6. Development of a flight software testing methodology

    Science.gov (United States)

    Mccluskey, E. J.; Andrews, D. M.

    1985-01-01

    The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada.

  7. Mining software specifications methodologies and applications

    CERN Document Server

    Lo, David

    2011-01-01

    An emerging topic in software engineering and data mining, specification mining tackles software maintenance and reliability issues that cost economies billions of dollars each year. The first unified reference on the subject, Mining Software Specifications: Methodologies and Applications describes recent approaches for mining specifications of software systems. Experts in the field illustrate how to apply state-of-the-art data mining and machine learning techniques to address software engineering concerns. In the first set of chapters, the book introduces a number of studies on mining finite

  8. Analytical solution describing pesticide volatilization from soil affected by a change in surface condition.

    Science.gov (United States)

    Yates, S R

    2009-01-01

    An analytical solution describing the fate and transport of pesticides applied to soils has been developed. Two pesticide application methods can be simulated: point-source applications, such as idealized shank or a hot-gas injection method, and a more realistic shank-source application method that includes a vertical pesticide distribution in the soil domain due to a soil fracture caused by a shank. The solutions allow determination of the volatilization rate and other information that could be important for understanding fumigant movement and in the development of regulatory permitting conditions. The solutions can be used to characterize differences in emissions relative to changes in the soil degradation rate, surface barrier conditions, application depth, and soil packing. In some cases, simple algebraic expressions are provided that can be used to obtain the total emissions and total soil degradation. The solutions provide a consistent methodology for determining the total emissions and can be used with other information, such as field and laboratory experimental data, to support the development of fumigant regulations. The uses of the models are illustrated by several examples.

  9. Methodologies used in Project Management

    OpenAIRE

    UNGUREANU, Adrian; UNGUREANU, Anca

    2014-01-01

    Undoubtedly, a methodology properly defined and strictly followed for project management provides a firm guarantee that the work will be done on time, in budget and according to specifications. A project management methodology in simple terms is a “must-have” to avoid failure and reduce risks, because is one of the critical success factors, such basic skills of the management team. This is the simple way to guide the team through the design and execution phases, processes and tasks throughout...

  10. Methodology for ranking restoration options

    DEFF Research Database (Denmark)

    Jensen, Per Hedemann

    1999-01-01

    techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

  11. Evaluation of potential severe accidents during Low Power and Shutdown Operations at Grand Gulf, Unit 1. Volume 2, Part 1B: Analysis of core damage frequency from internal events for Plant Operational State 5 during a refueling outage, Main report (Section 10)

    International Nuclear Information System (INIS)

    Whitehead, D.; Darby, J.; Yakle, J.

    1994-06-01

    This document contains the accident sequence analysis of internally initiated events for Grand Gulf, Unit 1 as it operates in the Low Power and Shutdown Plant Operational State 5 during a refueling outage. The report documents the methodology used during the analysis, describes the results from the application of the methodology, and compares the results with the results from two full power performed on Grand Gulf. This document, Volume 2, Part 1B, presents chapters Section 10 of this report, Human Reliability Analysis

  12. Least-cost Paths - Some Methodological Issues

    Directory of Open Access Journals (Sweden)

    Irmela Herzog

    2014-06-01

    Full Text Available This article deals with methodological issues connected with least-cost path (LCP calculations in archaeology. The number of LCP studies in archaeology has increased rapidly during the last couple of years, but not all of the approaches applied are based on an appropriate model and implementation. Many archaeologists rely on standard GIS software with default settings for calculating LCPs and are not aware of possible alternatives and the pitfalls that are described in this article. After briefly introducing the aims and applications of LCP methods in archaeology, LCP algorithms are discussed. The outcome of the LCP calculations depends not only on the algorithm but also on the cost model, which often includes several cost components. The discussion of the cost components has a focus on slope, because nearly all archaeological LCP studies take this cost component into account and because several methodological issues are connected with slope-based cost models. Other possible cost components are: the load of the walker, vegetation cover, wetlands or other soil properties, travelling and transport on water, water as barrier and as attractor, aspect, altitude, and social or cultural cost components. Eventually, advantages and disadvantages of different ways of combining cost components are presented. Based on the methodological issues I conclude that both validation checks and variations of the model are necessary to analyse the reliability of archaeological LCP results.

  13. An EPRI methodology for determining and monitoring simulator operating limits

    International Nuclear Information System (INIS)

    Eichelberg, R.; Pellechi, M.; Wolf, B.; Colley, R.

    1989-01-01

    Of paramount concern to nuclear utilities today is whether their plant-referenced simulator(s) comply with ANSI/ANS 3.5-1985. Of special interest is Section 4.3 of the Standard which requires, in part, that a means be provided to alert the instructor when certain parameters approach values indicative of events beyond the implemented model or known plant behavior. EPRI established Research Project 2054-2 to develop a comprehensive plan for determining, monitoring, and implementing simulator operating limits. As part of the project, a survey was conducted to identify the current/anticipated approach each of the sampled utilities was using to meet the requirements of Section 4.3. A preliminary methodology was drafted and host utilities interviewed. The interview process led to redefining the methodology. This paper covers the objectives of the EPRI project, survey responses, overview of the methodology, resource requirements and conclusions

  14. An objective methodology for the evaluation of the air quality stations positioning

    International Nuclear Information System (INIS)

    Benassi, A.; Marson, G.; Baraldo, E.; Dalan, F.; Lorenzet, K.; Bellasio, R.; Bianconi, R.

    2006-01-01

    This work describes a methodology for the evaluation of the correct positioning of the monitoring stations of an air quality network. The methodology is based on the Italian legislation, the European Directives and on some technical documents used as guidelines at European level. The paper describes all the assumption on which the methodology is based and the results of its application to the air quality network of Region Veneto (Italy) [it

  15. HIV / AIDS prevalence testing - merits, methodology and outcomes ...

    African Journals Online (AJOL)

    HIV / AIDS prevalence testing - merits, methodology and outcomes of a survey conducted at a large mining organisation in South Africa. ... These baseline prevalence data also provide an opportunity for monitoring of proposed interventions using cross-sectional surveys at designated intervals in the future. South African ...

  16. 18 CFR 342.4 - Other rate changing methodologies.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Other rate changing methodologies. 342.4 Section 342.4 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... regard to the applicable ceiling level under § 342.3. (b) Market-based rates. A carrier may attempt to...

  17. Sociodemographic differences in dietary habits described by food frequency questions - results from Denmark

    DEFF Research Database (Denmark)

    Dynesen, Anja Weirsøe; Haraldsdóttir, J.; Holm, Karen Lotte

    2003-01-01

    OBJECTIVES: To investigate whether a modest number of food frequency questions are sufficient to describe sociodemographic differences in dietary habits, and to identify sociodemographic characteristics of subjects adhering to food-based dietary guidelines operationalised in a "healthy-diet index......". DESIGN: Cross-sectional population survey. SUBJECTS: A total of 480 men, 515 women, aged 15-90 y. Random sample of private telephone numbers drawn from regional telephone records, geographically stratified. Participation rate 62%. METHODS: Computer-assisted telephone interviews, including six food...... frequency questions, a question on type of fat spreads used on bread, questions on seven sociodemographic variables. RESULTS: The summary of the healthy-diet index showed that the subjects who adhered to food-based dietary guidelines (top quintile) compared to those who did not (bottom quintile) were most...

  18. 25 CFR 900.58 - Do the same accountability and control procedures described above apply to Federal property?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Do the same accountability and control procedures described above apply to Federal property? 900.58 Section 900.58 Indians BUREAU OF INDIAN AFFAIRS... Organization Management Systems Property Management System Standards § 900.58 Do the same accountability and...

  19. 20 CFR 652.208 - How are core services and intensive services related to the methods of service delivery described...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How are core services and intensive services related to the methods of service delivery described in § 652.207(b)(2)? 652.208 Section 652.208 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR ESTABLISHMENT AND...

  20. Methodology for Designing Fault-Protection Software

    Science.gov (United States)

    Barltrop, Kevin; Levison, Jeffrey; Kan, Edwin

    2006-01-01

    A document describes a methodology for designing fault-protection (FP) software for autonomous spacecraft. The methodology embodies and extends established engineering practices in the technical discipline of Fault Detection, Diagnosis, Mitigation, and Recovery; and has been successfully implemented in the Deep Impact Spacecraft, a NASA Discovery mission. Based on established concepts of Fault Monitors and Responses, this FP methodology extends the notion of Opinion, Symptom, Alarm (aka Fault), and Response with numerous new notions, sub-notions, software constructs, and logic and timing gates. For example, Monitor generates a RawOpinion, which graduates into Opinion, categorized into no-opinion, acceptable, or unacceptable opinion. RaiseSymptom, ForceSymptom, and ClearSymptom govern the establishment and then mapping to an Alarm (aka Fault). Local Response is distinguished from FP System Response. A 1-to-n and n-to- 1 mapping is established among Monitors, Symptoms, and Responses. Responses are categorized by device versus by function. Responses operate in tiers, where the early tiers attempt to resolve the Fault in a localized step-by-step fashion, relegating more system-level response to later tier(s). Recovery actions are gated by epoch recovery timing, enabling strategy, urgency, MaxRetry gate, hardware availability, hazardous versus ordinary fault, and many other priority gates. This methodology is systematic, logical, and uses multiple linked tables, parameter files, and recovery command sequences. The credibility of the FP design is proven via a fault-tree analysis "top-down" approach, and a functional fault-mode-effects-and-analysis via "bottoms-up" approach. Via this process, the mitigation and recovery strategy(s) per Fault Containment Region scope (width versus depth) the FP architecture.

  1. Rational Choice Theory in Sociology: A Methodological Argument

    Directory of Open Access Journals (Sweden)

    ALEXANDRA GHEONDEA-ELADI

    2013-07-01

    Full Text Available În the last years, rational choice theory (RCT took over a lot of the social sciences, almost polarizing discussions in sociology, such that I was able to hear questions like: are there any other theories in sociology, besides rational choice theory? Although the answer to this question is clearly yes, what seems to be important to avoid is that the moment when this theory monopolizes behavioural explanations in a multi-paradigmatic discipline should not come from partial or incomplete knowledge of it. Consequently, I decided to write this article with two goals in mind: one, to make a review of what rational choice theory is and means to sociology and secondly, to shortly present a research which questioned the structuring of social events according to this theory[1]. In the first part of this paper, I will present the main aspects of rational choice theory, such that I can argue for choosing one of its variants in the second section. In the last part I will present the methodology I used to explore the closeness of the Volunteer's Dilemma (as Diekmann (1985, 1993 proposed it to the volunteering situation in Romania. I shall do this by aid of institutional analysis and interview analysis. The results of the research will be briefly described, such that, in the end, the conclusions can summarize the main ideas about rational choice theory emerging from this article.

  2. RATIONAL CHOICE THEORY IN SOCIOLOGY: A METHODOLOGICAL ARGUMENT

    Directory of Open Access Journals (Sweden)

    ALEXANDRA GHEONDEA-ELADI

    2013-01-01

    Full Text Available În the last years, rational choice theory (RCT took over a lot of the social sciences, almost polarizing discussions in sociology, such that I was able to hear questions like: are there any other theories in sociology, besides rational choice theory? Although the answer to this question is clearly yes, what seems to be important to avoid is that the moment when this theory monopolizes behavioural explanations in a multi-paradigmatic discipline should not come from partial or incomplete knowledge of it. Consequently, I decided to write this article with two goals in mind: one, to make a review of what rational choice theory is and means to sociology and secondly, to shortly present a research which questioned the structuring of social events according to this theory2. In the first part of this paper, I will present the main aspects of rational choice theory, such that I can argue for choosing one of its variants in the second section. In the last part I will present the methodology I used to explore the closeness of the Volunteer’s Dilemma (as Diekmann (1985, 1993 proposed it to the volunteering situation in Romania. I shall do this by aid of institutional analysis and interview analysis. The results of the research will be briefly described, such that, in the end, the conclusions can summarize the main ideas about rational choice theory emerging from this article

  3. A Systematic Procedure to Describe Shale Gas Permeability Evolution during the Production Process

    Science.gov (United States)

    Jia, B.; Tsau, J. S.; Barati, R.

    2017-12-01

    Gas flow behavior in shales is complex due to the multi-physics nature of the process. Pore size reduces as the in-situ stress increases during the production process, which will reduce intrinsic permeability of the porous media. Slip flow/pore diffusion enhances gas apparent permeability, especially under low reservoir pressures. Adsorption not only increases original gas in place but also influences gas flow behavior because of the adsorption layer. Surface diffusion between free gas and adsorption phase enhances gas permeability. Pore size reduction and the adsorption layer both have complex impacts on gas apparent permeability and non-Darcy flow might be a major component in nanopores. Previously published literature is generally incomplete in terms of coupling of all these four physics with fluid flow during gas production. This work proposes a methodology to simultaneously take them into account to describe a permeability evolution process. Our results show that to fully describe shale gas permeability evolution during gas production, three sets of experimental data are needed initially: 1) intrinsic permeability under different in-situ stress, 2) adsorption isotherm under reservoir conditions and 3) surface diffusivity measurement by the pulse-decay method. Geomechanical effects, slip flow/pore diffusion, adsorption layer and surface diffusion all play roles affecting gas permeability. Neglecting any of them might lead to misleading results. The increasing in-situ stress during shale gas production is unfavorable to shale gas flow process. Slip flow/pore diffusion is important for gas permeability under low pressures in the tight porous media. They might overwhelm the geomechanical effect and enhance gas permeability at low pressures. Adsorption layer reduces the gas permeability by reducing the effective pore size, but the effect is limited. Surface diffusion increases gas permeability more under lower pressures. The total gas apparent permeability might

  4. Application of Elliptic Fourier analysis to describe the lamina cribrosa shape with age and intraocular pressure.

    Science.gov (United States)

    Sanfilippo, P G; Grimm, J L; Flanagan, J G; Lathrop, K L; Sigal, I A

    2014-11-01

    The lamina cribrosa (LC) plays an important biomechanical role in the optic nerve head (ONH). We developed a statistical shape model of the LC and tested if the shape varies with age or IOP. The ONHs of 18 donor eyes (47-91 years, mean 76 years) fixed at either 5 or 50 mmHg of IOP were sectioned, stained, and imaged under a microscope. A 3D model of each ONH was reconstructed and the outline of the vertical sagittal section closest to the geometric center of the LC extracted. The outline shape was described using Elliptic Fourier analysis, and principal components analysis (PCA) employed to identify the primary modes of LC shape variation. Linear mixed effect models were used to determine if the shape measurements were associated with age or IOP. The analysis revealed several modes of shape variation: thickness and depth directly (PC 1), or inversely (PC 2) related, and superior-inferior asymmetry (PC 3). Only PC 3 was associated with IOP, with higher IOP correlating with greater curvature of the LC superiorly compared to inferiorly. Our analysis enabled a concise and complete characterization of LC shape, revealing variations without defining them a priori. No association between LC shape and age was found for the relatively old population studied. Superior-inferior asymmetry of LC shape was associated with IOP, with more asymmetry at higher IOP. Increased IOP was not associated with LC thickness or depth. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. A method to describe inelastic gamma field distribution in neutron gamma density logging.

    Science.gov (United States)

    Zhang, Feng; Zhang, Quanying; Liu, Juntao; Wang, Xinguang; Wu, He; Jia, Wenbao; Ti, Yongzhou; Qiu, Fei; Zhang, Xiaoyang

    2017-11-01

    Pulsed neutron gamma density logging (NGD) is of great significance for radioprotection and density measurement in LWD, however, the current methods have difficulty in quantitative calculation and single factor analysis for the inelastic gamma field distribution. In order to clarify the NGD mechanism, a new method is developed to describe the inelastic gamma field distribution. Based on the fast-neutron scattering and gamma attenuation, the inelastic gamma field distribution is characterized by the inelastic scattering cross section, fast-neutron scattering free path, formation density and other parameters. And the contribution of formation parameters on the field distribution is quantitatively analyzed. The results shows the contribution of density attenuation is opposite to that of inelastic scattering cross section and fast-neutron scattering free path. And as the detector-spacing increases, the density attenuation gradually plays a dominant role in the gamma field distribution, which means large detector-spacing is more favorable for the density measurement. Besides, the relationship of density sensitivity and detector spacing was studied according to this gamma field distribution, therefore, the spacing of near and far gamma ray detector is determined. The research provides theoretical guidance for the tool parameter design and density determination of pulsed neutron gamma density logging technique. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. A mathematical model for describing the mechanical behaviour of root canal instruments.

    Science.gov (United States)

    Zhang, E W; Cheung, G S P; Zheng, Y F

    2011-01-01

    The purpose of this study was to establish a general mathematical model for describing the mechanical behaviour of root canal instruments by combining a theoretical analytical approach with a numerical finite-element method. Mathematical formulas representing the longitudinal (taper, helical angle and pitch) and cross-sectional configurations and area, the bending and torsional inertia, the curvature of the boundary point and the (geometry of) loading condition were derived. Torsional and bending stresses and the resultant deformation were expressed mathematically as a function of these geometric parameters, modulus of elasticity of the material and the applied load. As illustrations, three brands of NiTi endodontic files of different cross-sectional configurations (ProTaper, Hero 642, and Mani NRT) were analysed under pure torsion and pure bending situation by entering the model into a finite-element analysis package (ANSYS). Numerical results confirmed that mathematical models were a feasible method to analyse the mechanical properties and predict the stress and deformation for root canal instruments during root canal preparation. Mathematical and numerical model can be a suitable way to examine mechanical behaviours as a criterion of the instrument design and to predict the stress and strain experienced by the endodontic instruments during root canal preparation. © 2010 International Endodontic Journal.

  7. Fast fission phenomenon, deep inelastic reactions and compound nucleus formation described within a dynamical macroscopic model

    International Nuclear Information System (INIS)

    Gregoire, C.; Ngo, C.; Remaud, B.

    1982-01-01

    We present a dynamical model to describe dissipative heavy ion reactions. It treats explicitly the relative motion of the two ions, the mass asymmetry of the system and the projection of the isospin of each ion. The deformations, which are induced during the collision, are simulated with a time-dependent interaction potential. This is done by a time-dependent transition between a sudden interaction potential in the entrance channel and an adiabatic potential in the exit channel. The model allows us to compute the compound-nucleus cross section and multidifferential cross-sections for deep inelastic reactions. In addition, for some systems, and under certain conditions which are discussed in detail, a new dissipative heavy ion collision appears: fast-fission phenomenon which has intermediate properties between deep inelastic and compound nucleus reactions. The calculated properties concerning fast fission are compared with experimental results and reproduce some of those which could not be understood as belonging to deep inelastic or compound-nucleus reactions. (orig.)

  8. Methodological guidelines for developing accident modification functions

    DEFF Research Database (Denmark)

    Elvik, Rune

    2015-01-01

    This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...... the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main...

  9. Describing medical student curiosity across a four year curriculum: An exploratory study.

    Science.gov (United States)

    Sternszus, Robert; Saroyan, Alenoush; Steinert, Yvonne

    2017-04-01

    Intellectual curiosity can be defined as a desire for knowledge that leads to exploratory behavior and consists of an inherent and stable trait (i.e. trait curiosity) and a variable context-dependent state (i.e. state curiosity). Although intellectual curiosity has been considered an important aspect of medical education and practice, its relationship to medical education has not been empirically investigated. The purpose of this exploratory study was to describe medical students' intellectual curiosity across a four-year undergraduate program. We employed a cross-sectional design in which medical students, across a four-year undergraduate program at McGill University, completed the Melbourne Curiosity Inventory as a measure of their state and trait intellectual curiosity. A Mixed Models ANOVA was used to compare students across year of training. Four hundred and two out of 751 students completed the inventory (53.5%). Trait curiosity was significantly higher than state curiosity (M = 64.5, SD = 8.5 versus M = 58.5, SD = 11.6) overall, and within each year of training. This study is the first to describe state and trait intellectual curiosity in undergraduate medical education. Findings suggest that medical students' state curiosity may not be optimally supported and highlight avenues for further research.

  10. Describing Growth Pattern of Bali Cows Using Non-linear Regression Models

    Directory of Open Access Journals (Sweden)

    Mohd. Hafiz A.W

    2016-12-01

    Full Text Available The objective of this study was to evaluate the best fit non-linear regression model to describe the growth pattern of Bali cows. Estimates of asymptotic mature weight, rate of maturing and constant of integration were derived from Brody, von Bertalanffy, Gompertz and Logistic models which were fitted to cross-sectional data of body weight taken from 74 Bali cows raised in MARDI Research Station Muadzam Shah Pahang. Coefficient of determination (R2 and residual mean squares (MSE were used to determine the best fit model in describing the growth pattern of Bali cows. Von Bertalanffy model was the best model among the four growth functions evaluated to determine the mature weight of Bali cattle as shown by the highest R2 and lowest MSE values (0.973 and 601.9, respectively, followed by Gompertz (0.972 and 621.2, respectively, Logistic (0.971 and 648.4, respectively and Brody (0.932 and 660.5, respectively models. The correlation between rate of maturing and mature weight was found to be negative in the range of -0.170 to -0.929 for all models, indicating that animals of heavier mature weight had lower rate of maturing. The use of non-linear model could summarize the weight-age relationship into several biologically interpreted parameters compared to the entire lifespan weight-age data points that are difficult and time consuming to interpret.

  11. Transition section for acoustic waveguides

    International Nuclear Information System (INIS)

    Karplus, H.H.B.

    1975-01-01

    A means of facilitating the transmission of acoustic waves with minimal reflection between two regions having different specific acoustic impedances is described comprising a region exhibiting a constant product of cross-sectional area and specific acoustic impedance at each cross-sectional plane along the axis of the transition region. A variety of structures that exhibit this feature is disclosed, the preferred embodiment comprising a nested structure of doubly reentrant cones. This structure is useful for monitoring the operation of nuclear reactors in which random acoustic signals are generated in the course of operation

  12. Managerial Methodology in Public Institutions

    Directory of Open Access Journals (Sweden)

    Ion VERBONCU

    2010-10-01

    Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

  13. Blanket safety by GEMSAFE methodology

    International Nuclear Information System (INIS)

    Sawada, Tetsuo; Saito, Masaki

    2001-01-01

    General Methodology of Safety Analysis and Evaluation for Fusion Energy Systems (GEMSAFE) has been applied to a number of fusion system designs, such as R-tokamak, Fusion Experimental Reactor (FER), and the International Thermonuclear Experimental Reactor (ITER) designs in the both stages of Conceptual Design Activities (CDA) and Engineering Design Activities (EDA). Though the major objective of GEMSAFE is to reasonably select design basis events (DBEs) it is also useful to elucidate related safety functions as well as requirements to ensure its safety. In this paper, we apply the methodology to fusion systems with future tritium breeding blankets and make clear which points of the system should be of concern from safety ensuring point of view. In this context, we have obtained five DBEs that are related to the blanket system. We have also clarified the safety functions required to prevent accident propagations initiated by those blanket-specific DBEs. The outline of the methodology is also reviewed. (author)

  14. Introducing an ILS methodology into research reactors

    International Nuclear Information System (INIS)

    Lorenzo, N. de; Borsani, R.C.

    2003-01-01

    Integrated Logistics Support (ILS) is the managerial organisation that co-ordinates the activities of many disciplines to develop the supporting resources (training, staffing, designing aids, equipment removal routes, etc) required by technologically complex systems. The application of an ILS methodology in defence projects is described in several places, but it is infrequently illustrated for other areas; therefore the present paper deals with applying this approach to research reactors under design or already in operation. Although better results are obtained when applied since the very beginning of a project, it can be applied successfully in facilities already in operation to improve their capability in a cost-effective way. In applying this methodology, the key objectives shall be previously identified in order to tailor the whole approach. Generally in high power multipurpose reactors, obtaining maximum profit at the lowest possible cost without reducing the safety levels are key issues, while in others the goal is to minimise drawbacks like spurious shutdowns, low quality experimental results or even to reduce staff dose to ALARA values. These items need to be quantified for establishing a system status base line in order to trace the process evolution. Thereafter, specific logistics analyses should be performed in the different areas composing the system. RAMS (Reliability, Availability, Maintainability and Supportability), Manning, Training Needs, Supplying Needs are some examples of these special logistic assessments. The following paragraphs summarise the different areas, encompassed by this ILS methodology. Plant design is influenced focussing the designers? attention on the objectives already identified. Careful design reviews are performed only in an early design stage, being useless a later application. In this paper is presented a methodology including appropriate tools for ensuring the designers abide to ILS issues and key objectives through the

  15. Methodology, theoretical framework and scholarly significance: An ...

    African Journals Online (AJOL)

    Methodology, theoretical framework and scholarly significance: An overview ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Keywords: Legal Research, Methodology, Theory, Pedagogy, Legal Training, Scholarship ...

  16. Preclosure Seismic Design Methodology for a Geologic Repository at Yucca Mountain

    International Nuclear Information System (INIS)

    K. Coppersmith

    2004-01-01

    This topical report describes the methodology and criteria that the U.S. Department of Energy (DOE) intends to use for preclosure seismic design of structures, systems, and components (SSCs) that are important to safety (ITS) in the geologic repository operations area. 10 Code of Federal Regulations (CFR) Part 63 [DIRS 156605], states that for a license to be issued for operation of a high-level radioactive waste repository, the U.S. Nuclear Regulatory Commission (NRC) must find that the facility will not constitute an unreasonable risk to the health and safety of the public (Section 63.41[c] [DIRS 156605]). Section 63.21(c)(5) [DIRS 156605] requires that a preclosure safety analysis (PCSA) be performed to ensure that the preclosure performance objectives (Section 63.111 [DIRS 156605]) have been met. The PCSA is a systematic examination of the site, the design, and the potential hazards (Section 63.102[f] [DIRS 156605]), including a comprehensive identification of potential event sequences. Potential naturally-occurring hazards include those event sequences that are initiated by earthquake ground motions or fault displacements due to earthquakes

  17. Methodological Guidelines for Advertising Research

    DEFF Research Database (Denmark)

    Rossiter, John R.; Percy, Larry

    2017-01-01

    In this article, highly experienced advertising academics and advertising research consultants John R. Rossiter and Larry Percy present and discuss what they believe to be the seven most important methodological guidelines that need to be implemented to improve the practice of advertising research....... Their focus is on methodology, defined as first choosing a suitable theoretical framework to guide the research study and then identifying the advertising responses that need to be studied. Measurement of those responses is covered elsewhere in this special issue in the article by Bergkvist and Langner. Most...

  18. An LWR design decision Methodology

    International Nuclear Information System (INIS)

    Leahy, T.J.; Rees, D.C.; Young, J.

    1982-01-01

    While all parties involved in nuclear plant regulation endeavor to make decisions which optimize the considerations of plant safety and financial impacts, these decisions are generally made without the benefit of a systematic and rigorous approach to the questions confronting the decision makers. A Design Decision Methodology has been developed which provides such a systematic approach. By employing this methodology, which makes use of currently accepted probabilistic risk assessment techniques and cost estimation, informed decisions may be made against a background of comparisons between the relative levels of safety and costs associated with various design alternatives

  19. Qualitative methodology in developmental psychology

    DEFF Research Database (Denmark)

    Demuth, Carolin; Mey, Günter

    2015-01-01

    Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing rec...... in qualitative research offers a promising avenue to advance the field in this direction.......Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing...

  20. Qualitative Methodology in Unfamiliar Cultures

    DEFF Research Database (Denmark)

    Svensson, Christian Franklin

    2014-01-01

    on a qualitative methodology, conscious reflection on research design and objectivity is important when doing fieldwork. This case study discusses such reflections. Emphasis throughout is given to applied qualitative methodology and its contributions to the social sciences, in particular having to do......This case study discusses qualitative fieldwork in Malaysia. The trends in higher education led to investigating how and why young Indians and Chinese in Malaysia are using the university to pursue a life strategy. Given the importance of field context in designing and analysing research based...

  1. Reflections on Design Methodology Research

    DEFF Research Database (Denmark)

    2011-01-01

    We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

  2. I. DEVELOPMENTAL METHODOLOGY AS A CENTRAL SUBDISCIPLINE OF DEVELOPMENTAL SCIENCE.

    Science.gov (United States)

    Card, Noel A

    2017-06-01

    This first chapter introduces the main goals of the monograph and previews the remaining chapters. The goals of this monograph are to provide summaries of our current understanding of advanced developmental methodologies, provide information that can advance our understanding of human development, identify shortcomings in our understanding of developmental methodology, and serve as a flagpost for organizing developmental methodology as a subdiscipline within the broader field of developmental science. The remaining chapters in this monograph address issues in design (sampling and big data), longitudinal data analysis, and issues of replication and research accumulation. The final chapter describes the history of developmental methodology, considers how the previous chapters in this monograph fit within this subdiscipline, and offers recommendations for further advancement. © 2017 The Society for Research in Child Development, Inc.

  3. Bridging Minds: A Mixed Methodology to Assess Networked Flow.

    Science.gov (United States)

    Galimberti, Carlo; Chirico, Alice; Brivio, Eleonora; Mazzoni, Elvis; Riva, Giuseppe; Milani, Luca; Gaggioli, Andrea

    2015-01-01

    The main goal of this contribution is to present a methodological framework to study Networked Flow, a bio-psycho-social theory of collective creativity applying it on creative processes occurring via a computer network. First, we draw on the definition of Networked Flow to identify the key methodological requirements of this model. Next, we present the rationale of a mixed methodology, which aims at combining qualitative, quantitative and structural analysis of group dynamics to obtain a rich longitudinal dataset. We argue that this integrated strategy holds potential for describing the complex dynamics of creative collaboration, by linking the experiential features of collaborative experience (flow, social presence), with the structural features of collaboration dynamics (network indexes) and the collaboration outcome (the creative product). Finally, we report on our experience with using this methodology in blended collaboration settings (including both face-to-face and virtual meetings), to identify open issues and provide future research directions.

  4. Characterization of genomic instability in Saccharomyces cerevisiae and engaging teaching strategies described in two curricula

    Science.gov (United States)

    Keller, Alexandra P.

    Cancer arises through an accumulation of mutations in the genome. In cancer cells, mutations are frequently caused by DNA rearrangements, which include chromosomal breakages, deletions, insertions, and translocations. Such events contribute to genomic instability, a known hallmark of cancer. To study cycles of chromosomal instability, we are using baker's yeast as a model organism. In yeast, a ChrVII system was previously developed (Admire et al., 2006), in which a disomic yeast strain was used to identify regions of instability on ChrVII. Using this system, a fragile site on the left arm of ChrVII (Admire et al., 2006) was identified and characterized. This study led to insight into mechanisms involved in chromosomal rearrangements and mutations that arise from them as well as to an understanding of mechanisms involved in genomic instability. To further our understanding of genomic instability, I devised a strategy to study instability on a different chromosome (ChrV) (Figure 3), so that we could determine whether lessons learned from the ChrVII system are applicable to other chromosomes, and/or whether other mechanisms of instability could be identified. A suitable strain was generated and analyzed, and our findings suggest that frequencies of instability on the right arm of ChrV are similar to those found in ChrVII. The results from the work in ChrV described in this paper support the idea that the instability found on ChrVII is not an isolated occurrence. My research was supported by an NSF GK-12 grant. The aim of this grant is to improve science education in middle schools, and as part of my participation in this program, I studied and practiced effective science communication methodologies. In attempts to explain my research to middle school students, I collaborated with others to develop methods for explaining genetics and the most important techniques I used in my research. While developing these methods, I learned more about what motivates people to learn

  5. Technical Note: Higher-order statistical moments and a procedure that detects potentially anomalous years as two alternative methods describing alterations in continuous environmental data

    Science.gov (United States)

    I. Arismendi; S. L. Johnson; J. B. Dunham

    2015-01-01

    Statistics of central tendency and dispersion may not capture relevant or desired characteristics of the distribution of continuous phenomena and, thus, they may not adequately describe temporal patterns of change. Here, we present two methodological approaches that can help to identify temporal changes in environmental regimes. First, we use higher-order statistical...

  6. Methodologic frontiers in environmental epidemiology.

    OpenAIRE

    Rothman, K J

    1993-01-01

    Environmental epidemiology comprises the epidemiologic study of those environmental factors that are outside the immediate control of the individual. Exposures of interest to environmental epidemiologists include air pollution, water pollution, occupational exposure to physical and chemical agents, as well as psychosocial elements of environmental concern. The main methodologic problem in environmental epidemiology is exposure assessment, a problem that extends through all of epidemiologic re...

  7. IMSF: Infinite Methodology Set Framework

    Science.gov (United States)

    Ota, Martin; Jelínek, Ivan

    Software development is usually an integration task in enterprise environment - few software applications work autonomously now. It is usually a collaboration of heterogeneous and unstable teams. One serious problem is lack of resources, a popular result being outsourcing, ‘body shopping’, and indirectly team and team member fluctuation. Outsourced sub-deliveries easily become black boxes with no clear development method used, which has a negative impact on supportability. Such environments then often face the problems of quality assurance and enterprise know-how management. The used methodology is one of the key factors. Each methodology was created as a generalization of a number of solved projects, and each methodology is thus more or less connected with a set of task types. When the task type is not suitable, it causes problems that usually result in an undocumented ad-hoc solution. This was the motivation behind formalizing a simple process for collaborative software engineering. Infinite Methodology Set Framework (IMSF) defines the ICT business process of adaptive use of methods for classified types of tasks. The article introduces IMSF and briefly comments its meta-model.

  8. Environmental Zoning: Some methodological implications

    NARCIS (Netherlands)

    Ike, Paul; Voogd, Henk

    1991-01-01

    The purpose of this article is to discuss some methodological problems of environmental zoning. The principle of environmental zoning will be elaborated. In addition an overview is given of a number of approaches that have been followed in practice to arrive at an integral judgement. Finally some

  9. Counting stem cells : methodological constraints

    NARCIS (Netherlands)

    Bystrykh, Leonid V.; Verovskaya, Evgenia; Zwart, Erik; Broekhuis, Mathilde; de Haan, Gerald

    The number of stem cells contributing to hematopoiesis has been a matter of debate. Many studies use retroviral tagging of stem cells to measure clonal contribution. Here we argue that methodological factors can impact such clonal analyses. Whereas early studies had low resolution, leading to

  10. Test reactor risk assessment methodology

    International Nuclear Information System (INIS)

    Jennings, R.H.; Rawlins, J.K.; Stewart, M.E.

    1976-04-01

    A methodology has been developed for the identification of accident initiating events and the fault modeling of systems, including common mode identification, as these methods are applied in overall test reactor risk assessment. The methods are exemplified by a determination of risks to a loss of primary coolant flow in the Engineering Test Reactor

  11. METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Tetyana KOVALCHUK

    2016-07-01

    Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

  12. 16 Offsetting deficit conceptualisations: methodological ...

    African Journals Online (AJOL)

    uses the concepts of literacy practices and knowledge recontextualisation to ... 1996, 2000) theory of 'knowledge recontextualisation' in the development of curricula .... cognitive, social and cultural abilities needed to fit in and thrive in the HE learning .... this argument, that a methodology and analytic framework that seeks to ...

  13. Methodology for the case studies

    NARCIS (Netherlands)

    Smits, M.J.W.; Woltjer, G.B.

    2017-01-01

    This document is about the methodology and selection of the case studies. It is meant as a guideline for the case studies, and together with the other reports in this work package can be a source of inform ation for policy officers, interest groups and researchers evaluating or performing impact

  14. Safety at Work : Research Methodology

    NARCIS (Netherlands)

    Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

    2012-01-01

    In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

  15. Intelligent systems/software engineering methodology - A process to manage cost and risk

    Science.gov (United States)

    Friedlander, Carl; Lehrer, Nancy

    1991-01-01

    A systems development methodology is discussed that has been successfully applied to the construction of a number of intelligent systems. This methodology is a refinement of both evolutionary and spiral development methodologies. It is appropriate for development of intelligent systems. The application of advanced engineering methodology to the development of software products and intelligent systems is an important step toward supporting the transition of AI technology into aerospace applications. A description of the methodology and the process model from which it derives is given. Associated documents and tools are described which are used to manage the development process and record and report the emerging design.

  16. The analysis of RWAP(Rod Withdrawal at Power) using the KEPRI methodology

    International Nuclear Information System (INIS)

    Yang, C. K.; Kim, Y. H.

    2001-01-01

    KEPRI developed new methodology which was based on RASP(Reactor Analysis Support Package). In this paper, The analysis of RWAP(Rod Withdrawal at Power) accident which can result in reactivity and power distribution anomaly was performed using the KEPRI methodology. The calculation describes RWAP transient and documents the analysis, including the computer code modeling assumptions and input parameters used in the analysis. To validity for the new methodology, the result of calculation was compared with FSAR. As compared with FSAR, result of the calculation using the KEPRI Methodology is similar to FSAR's. And result of the sensitivity of postulated parameters were similar to the existing methodology

  17. A Study on Uncertainty Quantification of Reflood Model using CIRCE Methodology

    International Nuclear Information System (INIS)

    Jeon, Seongsu; Hong, Soonjoon; Oh, Deogyeon; Bang, Youngseok

    2013-01-01

    The CIRCE method is intended to quantify the uncertainties of the correlations of a code. It may replace the expert judgment generally used. In this study, an uncertainty quantification of reflood model was performed using CIRCE methodology. In this paper, the application process of CIRCE methodology and main results are briefly described. This research is expected to be useful to improve the present audit calculation methodology, KINS-REM. In this study, an uncertainty quantification of reflood model was performed using CIRCE methodology. The application of CIRCE provided the satisfactory results. This research is expected to be useful to improve the present audit calculation methodology, KINS-REM

  18. A didactically novel derivation of the telegraph equation to describe sound propagation in rigid tubes

    International Nuclear Information System (INIS)

    Till, Bernie C; Driessen, Peter F

    2014-01-01

    Starting from first principles, we derive the telegraph equation to describe the propagation of sound waves in rigid tubes by using a simple approach that yields a lossy transmission line model with frequency-independent parameters. The approach is novel in the sense that it has not been found in the literature or textbooks. To derive the lossy acoustic telegraph equation from the lossless wave equation, we need only to relax the assumption that the dynamical variables are constant over the entire cross-sectional area of the tube. In this paper, we do this by introducing a relatively narrow boundary layer at the wall of the tube, over which the dynamical variables decrease linearly from the constant value to zero. This allows us to make very simple corrections to the lossless case, and to express them in terms of two parameters, namely the viscous diffusion time constant and the thermal diffusion time constant. The coefficients of the resulting telegraph equation are frequency-independent. A comparison with the telegraph equation for the electrical transmission line establishes precise relationships between the electrical circuit elements and the physical properties of the fluid. These relationships are thus proven a posteriori rather than asserted a priori. In this way, we arrive at an instructive and useful derivation of the acoustic telegraph equation, which takes viscous damping and thermal dissipation into account, and is accessible to students at the undergraduate level. This derivation does not resort to the combined heavy machinery of fluid dynamics and thermodynamics, does not assume that the waveforms are sinusoidal, and does not assume any particular cross-sectional shape of the tube. Surprisingly, we have been unable to find a comparable treatment in the standard introductory physics and acoustics texts, or in the literature. (paper)

  19. Aeolian stratigraphy describes ice-age paleoenvironments in unglaciated Arctic Alaska

    Science.gov (United States)

    Gaglioti, Benjamin V.; Mann, Daniel H.; Groves, Pamela; Kunz, Michael L.; Farquharson, Louise M.; Reanier, Richard E.; Jones, Benjamin M.; Wooller, Matthew J.

    2018-02-01

    Terrestrial paleoenvironmental records with high dating resolution extending into the last ice age are rare from the western Arctic. Such records can test the synchronicity and extent of ice-age climatic events and define how Arctic landscapes respond to rapid climate changes. Here we describe the stratigraphy and sedimentology of a yedoma deposit in Arctic Alaska (the Carter Section) dating to between 37,000 and 9000 calibrated radiocarbon years BP (37-9 ka) and containing detailed records of loess and sand-sheet sedimentation, soil development, carbon storage, and permafrost dynamics. Alternation between sand-sheet and loess deposition provides a proxy for the extent and activity of the Ikpikpuk Sand Sea (ISS), a large dune field located immediately upwind. Warm, moist interstadial times (ca. 37, 36.3-32.5, and 15-13 ka) triggered floodplain aggradation, permafrost thaw, reduced loess deposition, increased vegetation cover, and rapid soil development accompanied by enhanced carbon storage. During the Last Glacial Maximum (LGM, ca. 28-18 ka), rapid loess deposition took place on a landscape where vegetation was sparse and non-woody. The most intense aeolian activity occurred after the LGM between ca. 18 and 15 ka when sand sheets fringing the ISS expanded over the site, possibly in response to increasingly droughty conditions as summers warmed and active layers deepened. With the exception of this lagged LGM response, the record of aeolian activity at the Carter Section correlates with other paleoenvironmental records from unglaciated Siberia and Alaska. Overall, rapid shifts in geomorphology, soils, vegetation, and permafrost portray an ice-age landscape where, in contrast to the Holocene, environmental change was chronic and dominated by aeolian processes.

  20. Methodological design of the National Health and Nutrition Survey 2016

    OpenAIRE

    Martín Romero-Martínez; Teresa Shamah-Levy; Lucia Cuevas-Nasu; Ignacio Méndez Gómez-Humarán; Elsa Berenice Gaona-Pineda; Luz María Gómez-Acosta; Juan Ángel Rivera-Dommarco; Mauricio Hernández-Ávila

    2017-01-01

    Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organizat...

  1. FEMA DFIRM Cross Sections

    Data.gov (United States)

    Minnesota Department of Natural Resources — FEMA Cross Sections are required for any Digital Flood Insurance Rate Map database where cross sections are shown on the Flood Insurance Rate Map (FIRM). Normally...

  2. Stable isotope methodology and its application to nutrition and gastroenterology

    International Nuclear Information System (INIS)

    Klein, P.D.; Hachey, D.L.; Wong, W.W.; Abrams, S.A.

    1993-01-01

    This report describes the activities of the Stable Isotope Laboratory in its function as a core resource facility for stable isotope applications in human nutrition research. Three aspects are covered: Training of visitors, assessment of new instrumentation, and development of new methodology. The research achievements of the laboratory are indicated in the publications that appeared during this period. (author). 23 refs

  3. Practical Aspects of Research Monitoring: Methodological and Functional Solutions

    Directory of Open Access Journals (Sweden)

    A A Onosov

    2013-12-01

    Full Text Available The article describes the experience of designing, testing and implementing the National system of monitoring the quality of meteorological services in Russia. Within the framework of this project a large-scale research program was carried out aimed to develop the conception, methodology, research tools and design of customer assessment of the Roshydromet services.

  4. SINGULAR SPECTRUM ANALYSIS: METHODOLOGY AND APPLICATION TO ECONOMICS DATA

    Institute of Scientific and Technical Information of China (English)

    Hossein HASSANI; Anatoly ZHIGLJAVSKY

    2009-01-01

    This paper describes the methodology of singular spectrum analysis (SSA) and demonstrate that it is a powerful method of time series analysis and forecasting, particulary for economic time series. The authors consider the application of SSA to the analysis and forecasting of the Iranian national accounts data as provided by the Central Bank of the Islamic Republic of lran.

  5. Personality Assessment of Global Talent: Conceptual and Methodological Issues

    Science.gov (United States)

    van de Vijver, Fons J. R.

    2008-01-01

    The recruitment of managers who will operate in a culturally heterogeneous context (as expatriate managers, managers in a global company, or managers of a multicultural workforce) is increasingly important in an age of globalization. This article describes conceptual and methodological issues in the assessment of such managers, notably in the…

  6. Methodological Issues in Survey Research: A Historical Review

    NARCIS (Netherlands)

    de Heer, W.; de Leeuw, E.D.; van der Zouwen, J.

    1999-01-01

    In this paper, we present a historical overview of social surveys and describe the historical development of scientific survey methodology and survey statistics. The origins of survey research can be traced back to the early 19th century and the first scientiflc survey was conducted in England in

  7. A vision on methodology for integrated sustainable urban development: bequest

    NARCIS (Netherlands)

    Bentivegna, V.; Curwell, S.; Deakin, M.; Lombardi, P.; Mitchell, G.; Nijkamp, P.

    2002-01-01

    The concepts and visions of sustainable development that have emerged in the post-Brundtland era are explored in terms laying the foundations for a common vision of sustainable urban development (SUD). The described vision and methodology for SUD resulted from the activities of an international

  8. Regional issue identification and assessment: study methodology. First annual report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The overall assessment methodologies and models utilized for the first project under the Regional Issue Identification and Assessment (RIIA) program are described. Detailed descriptions are given of the methodologies used by lead laboratories for the quantification of the impacts of an energy scenario on one or more media (e.g., air, water, land, human and ecology), and by all laboratories to assess the regional impacts on all media. The research and assessments reflected in this document were performed by the following national laboratories: Argonne National Laboratory; Brookhaven National Laboratory; Lawrence Berkeley Laboratory; Los Alamos Scientific Laboratory; Oak Ridge National Laboratory; and Pacific Northwest Laboratory. This report contains five chapters. Chapter 1 briefly describes the overall study methodology and introduces the technical participants. Chapter 2 is a summary of the energy policy scenario selected for the RIIA I study and Chapter 3 describes how this scenario was translated into a county-level siting pattern of energy development. The fourth chapter is a detailed description of the individual methodologies used to quantify the environmental and socioeconomic impacts of the scenario while Chapter 5 describes how these impacts were translated into comprehensive regional assessments for each Federal Region.

  9. The Methodology of Expert Audit in the Cloud Computing System

    Directory of Open Access Journals (Sweden)

    Irina Vladimirovna Mashkina

    2013-12-01

    Full Text Available The problem of information security audit in the cloud computing system is discussed. The methodology of the expert audit is described, it allows to estimate not only the value of information security risk level, but also operative value of information security risk level. The fuzzy cognitive maps and artificial neural network are used for solution of this problem.

  10. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  11. Methodology for reactor core physics analysis - part 2

    International Nuclear Information System (INIS)

    Ponzoni Filho, P.; Fernandes, V.B.; Lima Bezerra, J. de; Santos, T.I.C.

    1992-12-01

    The computer codes used for reactor core physics analysis are described. The modifications introduced in the public codes and the technical basis for the codes developed by the FURNAS utility are justified. An evaluation of the impact of these modifications on the parameter involved in qualifying the methodology is included. (F.E.). 5 ref, 7 figs, 5 tabs

  12. D1.5 WEKIT Framework and Training Methodology

    NARCIS (Netherlands)

    Limbu, Bibeg

    2017-01-01

    The document reports on the status of the WEKIT framework. Building up on the methodologies described in D1.3, it outlines the work done and progress made so far in the Task 1.3. The WEKIT framework was drafted to guide and support the development and implementation of the project. It aims to

  13. Summary of FY-1978 consultation input for Scenario Methodology Development

    International Nuclear Information System (INIS)

    Scott, B.L.; Benson, G.L.; Craig, R.A.; Harwell, M.A.

    1979-11-01

    The Scenario Methodology Development task is concerned with evaluating the geologic system surrounding an underground repository and describing the phenomena (volcanic, seismic, meteorite, hydrologic, tectonic, climate, etc.) which could perturb the system and possibly cause loss of repository integrity. This document includes 14 individual papers. Separate abstracts were prepared for all 14 papers

  14. Methodology of Education and R&D in Mechatronics.

    Science.gov (United States)

    Yamazaki, K.; And Others

    1985-01-01

    Describes the concept and methodology of "mechatronics" (application of microelectronics to mechanism control) and research and development (R&D) projects through the activities initiated at the Precision Machining Laboratory of the Department of Production Systems Engineering of the new Toyohashi University of Technology. (JN)

  15. Theoretical and Methodological Considerations on the Public Offers

    OpenAIRE

    Claudia Catalina SAVA

    2013-01-01

    This paper describes the most important characteristics of the public offers, both from the theoretical and methodological view. The European Union emphasizes clarity and transparency. The author focuses on specific provisions of European Directive and Romanian law and regulations related to voluntary and mandatory takeover bids, on characteristics such as price, offeror and offeeree right, offer timetable.

  16. An aspect-oriented methodology for designing secure applications

    NARCIS (Netherlands)

    Georg, Geri; Ray, Indrakshi; Anastasakis, Kyriakos; Bordbar, Behzad; Toahchoodee, Manachai; Houmb, S.H.

    We propose a methodology, based on aspect-oriented modeling (AOM), for incorporating security mechanisms in an application. The functionality of the application is described using the primary model and the attacks are specified using aspects. The attack aspect is composed with the primary model to

  17. Researching Teacher Education for Inclusion: Using a Methodological Memo

    Science.gov (United States)

    Young, Kathryn S.; Florian, Lani

    2013-01-01

    This article describes how a methodological memo (MM) was used in a research and development project designed to reform initial teacher education (ITE). A MM was used to explore what often remains an opaque part of the research process--the relationships between theory and practice that underpin many research studies. Yet, without detailed…

  18. A Critique of Methodological Dualism in Education

    Science.gov (United States)

    Yang, Jeong A.; Yoo, Jae-Bong

    2018-01-01

    This paper aims to critically examine the paradigm of methodological dualism and explore whether methodologies in social science currently are appropriate for educational research. There are two primary methodologies for studying education: quantitative and qualitative methods. This is what we mean by "methodological dualism". Is…

  19. Feminist Methodologies and Engineering Education Research

    Science.gov (United States)

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  20. A Performance Tuning Methodology with Compiler Support

    Directory of Open Access Journals (Sweden)

    Oscar Hernandez

    2008-01-01

    Full Text Available We have developed an environment, based upon robust, existing, open source software, for tuning applications written using MPI, OpenMP or both. The goal of this effort, which integrates the OpenUH compiler and several popular performance tools, is to increase user productivity by providing an automated, scalable performance measurement and optimization system. In this paper we describe our environment, show how these complementary tools can work together, and illustrate the synergies possible by exploiting their individual strengths and combined interactions. We also present a methodology for performance tuning that is enabled by this environment. One of the benefits of using compiler technology in this context is that it can direct the performance measurements to capture events at different levels of granularity and help assess their importance, which we have shown to significantly reduce the measurement overheads. The compiler can also help when attempting to understand the performance results: it can supply information on how a code was translated and whether optimizations were applied. Our methodology combines two performance views of the application to find bottlenecks. The first is a high level view that focuses on OpenMP/MPI performance problems such as synchronization cost and load imbalances; the second is a low level view that focuses on hardware counter analysis with derived metrics that assess the efficiency of the code. Our experiments have shown that our approach can significantly reduce overheads for both profiling and tracing to acceptable levels and limit the number of times the application needs to be run with selected hardware counters. In this paper, we demonstrate the workings of this methodology by illustrating its use with selected NAS Parallel Benchmarks and a cloud resolving code.

  1. Safety of High Speed Ground Transportation Systems : Analytical Methodology for Safety Validation of Computer Controlled Subsystems : Volume 2. Development of a Safety Validation Methodology

    Science.gov (United States)

    1995-01-01

    This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety cortical functions in high-speed rail or magnetic levitation ...

  2. Analytical methodology for safety validation of computer controlled subsystems. Volume 1 : state-of-the-art and assessment of safety verification/validation methodologies

    Science.gov (United States)

    1995-09-01

    This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety critical functions in high-speed rail or magnetic levitation ...

  3. Sociodemographic differences in dietary habits described by food frequency questions--results from Denmark.

    Science.gov (United States)

    Dynesen, A W; Haraldsdóttir, J; Holm, L; Astrup, A

    2003-12-01

    To investigate whether a modest number of food frequency questions are sufficient to describe sociodemographic differences in dietary habits, and to identify sociodemographic characteristics of subjects adhering to food-based dietary guidelines operationalised in a "healthy-diet index". Cross-sectional population survey. A total of 480 men, 515 women, aged 15-90 y. Random sample of private telephone numbers drawn from regional telephone records, geographically stratified. Participation rate 62%. Computer-assisted telephone interviews, including six food frequency questions, a question on type of fat spreads used on bread, questions on seven sociodemographic variables. The summary of the healthy-diet index showed that the subjects who adhered to food-based dietary guidelines (top quintile) compared to those who did not (bottom quintile) were most often women (odds ratio (OR)=6.07; confidence interval (CI): 3.91-9.43, women vs men), of older age (OR=9.72; CI: 3.02-31.31, old age vs young), highly educated (OR=3.69; CI: 1.53-8.92, high education vs low) and living in multiperson households including children (OR=4.66; CI: 2.47-8.80, multiperson household vs single household). The results also showed that gender difference in dietary habits is associated with other sociodemographic variables. The selected food frequency questions proved sufficient to describe sociodemographic differences in dietary habits, and this method may be a valuable supplement to traditional quantitative dietary surveys in monitoring sociodemographic changes in eating patterns. The results also underline the influence of sociodemographic status on dietary habits. The Danish Nutrition Council funded the study.

  4. New analytical methodology to reach the actinide determination accuracy ({+-} 2%) required by the OSMOSE program

    Energy Technology Data Exchange (ETDEWEB)

    Boyer-Deslys, V.; Combaluzier, T.; Dalier, V.; Martin, J.C.; Viallesoubranne, C. [DRCP/SE2A/LAMM, CEA/VALRHO - Marcoule, BP 17171, 30207 Bagnols-sur-Ceze (France); Crozet, M. [LEHA, CEA/VALRHO - Marcoule, BP 17171, 30207 Bagnols-sur-Ceze (France)

    2008-07-01

    This article describes the analytical procedure optimized by LAMM (Laboratory for Analysis and Materials Methodology) in order to characterize the actinide-doped pellets used in the Osmose (Oscillation in Minerve of isotopes in eupraxis spectra) program (developed for transmutation reactor physics). Osmose aims at providing precise experimental data (absorption cross sections) for heavy nuclides (atomic mass from 232 to 245). This procedure requires the use of the analytical equipment and expertise of the LAMM: TIMS (Thermal Ionization Mass Spectrometer), ICP (Inductively Coupled Plasma) QMS (Quadrupole Mass Spectrometer), SFMS (Sector Field Mass Spectrometer), AES (Atomic Emission Spectrometer), alpha spectrometry and photo-gravimetric analysis. These techniques have met all the specification requirements: extended uncertainties (k=2) below {+-} 2% on the uranium and dopant concentrations, the impurity concentration and the americium-241 concentration.

  5. Review of advanced control rooms: Methodological considerations for the use of HFE guidelines

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    1994-01-01

    Control rooms for advanced nuclear power plants use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system and the ways in which operators interact with the system. The US Nuclear Regulatory Commission (NRC) reviews HSIs to ensure that they are designed to accepted human factors engineering (HFE) principles. The principal review guidance, however, is more than ten-years old (US NRC, 1981). Accordingly, an Advanced HSI Design Review Guideline (DRG) was developed to provide criteria for these reviews. The DRG contains seven major sections: Information Display, User-System Interaction, Process Control and Input Devices, Alarms, Analysis and Decision Aids, Inter-Personnel Communication, and Workplace Design (see O'Hara ampersand Brown, 1993). The purpose of this paper is to describe the methodology for DRG use

  6. Medicare program; replacement of reasonable charge methodology by fee schedules for parenteral and enteral nutrients, equipment, and supplies. Final rule.

    Science.gov (United States)

    2001-08-28

    This final rule implements fee schedules for payment of parenteral and enteral nutrition (PEN) items and services furnished under the prosthetic device benefit, defined in section 1861(s)(8) of the Social Security Act. The authority for establishing these fee schedules is provided by the Balanced Budget Act of 1997, which amended the Social Security Act at section 1842(s). Section 1842(s) of the Social Security Act specifies that statewide or other area wide fee schedules may be implemented for the following items and services still subject to the reasonable charge payment methodology: medical supplies; home dialysis supplies and equipment; therapeutic shoes; parenteral and enteral nutrients, equipment, and supplies; electromyogram devices; salivation devices; blood products; and transfusion medicine. This final rule describes changes made to the proposed fee schedule payment methodology for these items and services and provides that the fee schedules for PEN items and services are effective for all covered items and services furnished on or after January 1, 2002. Fee schedules will not be implemented for electromyogram devices and salivation devices at this time since these items are not covered by Medicare. In addition, fee schedules will not be implemented for medical supplies, home dialysis supplies and equipment, therapeutic shoes, blood products, and transfusion medicine at this time since the data required to establish these fee schedules are inadequate.

  7. Methodology for reliability based condition assessment

    International Nuclear Information System (INIS)

    Mori, Y.; Ellingwood, B.

    1993-08-01

    Structures in nuclear power plants may be exposed to aggressive environmental effects that cause their strength to decrease over an extended period of service. A major concern in evaluating the continued service for such structures is to ensure that in their current condition they are able to withstand future extreme load events during the intended service life with a level of reliability sufficient for public safety. This report describes a methodology to facilitate quantitative assessments of current and future structural reliability and performance of structures in nuclear power plants. This methodology takes into account the nature of past and future loads, and randomness in strength and in degradation resulting from environmental factors. An adaptive Monte Carlo simulation procedure is used to evaluate time-dependent system reliability. The time-dependent reliability is sensitive to the time-varying load characteristics and to the choice of initial strength and strength degradation models but not to correlation in component strengths within a system. Inspection/maintenance strategies are identified that minimize the expected future costs of keeping the failure probability of a structure at or below an established target failure probability during its anticipated service period

  8. Methodology for allocating reliability and risk

    International Nuclear Information System (INIS)

    Cho, N.Z.; Papazoglou, I.A.; Bari, R.A.

    1986-05-01

    This report describes a methodology for reliability and risk allocation in nuclear power plants. The work investigates the technical feasibility of allocating reliability and risk, which are expressed in a set of global safety criteria and which may not necessarily be rigid, to various reactor systems, subsystems, components, operations, and structures in a consistent manner. The report also provides general discussions on the problem of reliability and risk allocation. The problem is formulated as a multiattribute decision analysis paradigm. The work mainly addresses the first two steps of a typical decision analysis, i.e., (1) identifying alternatives, and (2) generating information on outcomes of the alternatives, by performing a multiobjective optimization on a PRA model and reliability cost functions. The multiobjective optimization serves as the guiding principle to reliability and risk allocation. The concept of ''noninferiority'' is used in the multiobjective optimization problem. Finding the noninferior solution set is the main theme of the current approach. The final step of decision analysis, i.e., assessment of the decision maker's preferences could then be performed more easily on the noninferior solution set. Some results of the methodology applications to a nontrivial risk model are provided, and several outstanding issues such as generic allocation, preference assessment, and uncertainty are discussed. 29 refs., 44 figs., 39 tabs

  9. Urban metabolism: A review of research methodologies

    International Nuclear Information System (INIS)

    Zhang, Yan

    2013-01-01

    Urban metabolism analysis has become an important tool for the study of urban ecosystems. The problems of large metabolic throughput, low metabolic efficiency, and disordered metabolic processes are a major cause of unhealthy urban systems. In this paper, I summarize the international research on urban metabolism, and describe the progress that has been made in terms of research methodologies. I also review the methods used in accounting for and evaluating material and energy flows in urban metabolic processes, simulation of these flows using a network model, and practical applications of these methods. Based on this review of the literature, I propose directions for future research, and particularly the need to study the urban carbon metabolism because of the modern context of global climate change. Moreover, I recommend more research on the optimal regulation of urban metabolic systems. Highlights: •Urban metabolic processes can be analyzed by regarding cities as superorganisms. •Urban metabolism methods include accounting, assessment, modeling, and regulation. •Research methodologies have improved greatly since this field began in 1965. •Future research should focus on carbon metabolism and optimal regulation. -- The author reviews research progress in the field of urban metabolism, and based on her literature review, proposes directions for future research

  10. Application of a methodology for retouching

    Directory of Open Access Journals (Sweden)

    Ana Bailão

    2010-11-01

    Full Text Available Between November 2006 and January 2010, an investigation into retouching methodologies was carried out. The aim of this paper is to describe, in four steps, the retouching methodology of a contemporary painting. The four steps are: chromatic and formal study, considering the use of Gestalt theory and the phenomena of contrast and assimilation; selection of the technique; choice of the materials and retouching practice.Entre Novembre 2006 et Janvier 2010, nous avons fait une recherche dans le cadre du programme de Maitrise sur la méthodologie et les techniques de retouche. Le but de cet article est la description, en quatre étapes, de la méthodologie de retouche d’une peinture contemporaine. Les quatre étapes sont: étude chromatique et formelle, avec l’utilisation de la théorie de la Gestalt et des phénomènes de contraste et assimilation, la sélection de la technique, le choix des matériaux et la pratique de retouche. 

  11. Methodology for dimensional variation analysis of ITER integrated systems

    International Nuclear Information System (INIS)

    Fuentes, F. Javier; Trouvé, Vincent; Cordier, Jean-Jacques; Reich, Jens

    2016-01-01

    Highlights: • Tokamak dimensional management methodology, based on 3D variation analysis, is presented. • Dimensional Variation Model implementation workflow is described. • Methodology phases are described in detail. The application of this methodology to the tolerance analysis of ITER Vacuum Vessel is presented. • Dimensional studies are a valuable tool for the assessment of Tokamak PCR (Project Change Requests), DR (Deviation Requests) and NCR (Non-Conformance Reports). - Abstract: The ITER machine consists of a large number of complex systems highly integrated, with critical functional requirements and reduced design clearances to minimize the impact in cost and performances. Tolerances and assembly accuracies in critical areas could have a serious impact in the final performances, compromising the machine assembly and plasma operation. The management of tolerances allocated to part manufacture and assembly processes, as well as the control of potential deviations and early mitigation of non-compliances with the technical requirements, is a critical activity on the project life cycle. A 3D tolerance simulation analysis of ITER Tokamak machine has been developed based on 3DCS dedicated software. This integrated dimensional variation model is representative of Tokamak manufacturing functional tolerances and assembly processes, predicting accurate values for the amount of variation on critical areas. This paper describes the detailed methodology to implement and update the Tokamak Dimensional Variation Model. The model is managed at system level. The methodology phases are illustrated by its application to the Vacuum Vessel (VV), considering the status of maturity of VV dimensional variation model. The following topics are described in this paper: • Model description and constraints. • Model implementation workflow. • Management of input and output data. • Statistical analysis and risk assessment. The management of the integration studies based on

  12. Methodology for dimensional variation analysis of ITER integrated systems

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes, F. Javier, E-mail: FranciscoJavier.Fuentes@iter.org [ITER Organization, Route de Vinon-sur-Verdon—CS 90046, 13067 St Paul-lez-Durance (France); Trouvé, Vincent [Assystem Engineering & Operation Services, rue J-M Jacquard CS 60117, 84120 Pertuis (France); Cordier, Jean-Jacques; Reich, Jens [ITER Organization, Route de Vinon-sur-Verdon—CS 90046, 13067 St Paul-lez-Durance (France)

    2016-11-01

    Highlights: • Tokamak dimensional management methodology, based on 3D variation analysis, is presented. • Dimensional Variation Model implementation workflow is described. • Methodology phases are described in detail. The application of this methodology to the tolerance analysis of ITER Vacuum Vessel is presented. • Dimensional studies are a valuable tool for the assessment of Tokamak PCR (Project Change Requests), DR (Deviation Requests) and NCR (Non-Conformance Reports). - Abstract: The ITER machine consists of a large number of complex systems highly integrated, with critical functional requirements and reduced design clearances to minimize the impact in cost and performances. Tolerances and assembly accuracies in critical areas could have a serious impact in the final performances, compromising the machine assembly and plasma operation. The management of tolerances allocated to part manufacture and assembly processes, as well as the control of potential deviations and early mitigation of non-compliances with the technical requirements, is a critical activity on the project life cycle. A 3D tolerance simulation analysis of ITER Tokamak machine has been developed based on 3DCS dedicated software. This integrated dimensional variation model is representative of Tokamak manufacturing functional tolerances and assembly processes, predicting accurate values for the amount of variation on critical areas. This paper describes the detailed methodology to implement and update the Tokamak Dimensional Variation Model. The model is managed at system level. The methodology phases are illustrated by its application to the Vacuum Vessel (VV), considering the status of maturity of VV dimensional variation model. The following topics are described in this paper: • Model description and constraints. • Model implementation workflow. • Management of input and output data. • Statistical analysis and risk assessment. The management of the integration studies based on

  13. Methodologies of Uncertainty Propagation Calculation

    International Nuclear Information System (INIS)

    Chojnacki, Eric

    2002-01-01

    After recalling the theoretical principle and the practical difficulties of the methodologies of uncertainty propagation calculation, the author discussed how to propagate input uncertainties. He said there were two kinds of input uncertainty: - variability: uncertainty due to heterogeneity, - lack of knowledge: uncertainty due to ignorance. It was therefore necessary to use two different propagation methods. He demonstrated this in a simple example which he generalised, treating the variability uncertainty by the probability theory and the lack of knowledge uncertainty by the fuzzy theory. He cautioned, however, against the systematic use of probability theory which may lead to unjustifiable and illegitimate precise answers. Mr Chojnacki's conclusions were that the importance of distinguishing variability and lack of knowledge increased as the problem was getting more and more complex in terms of number of parameters or time steps, and that it was necessary to develop uncertainty propagation methodologies combining probability theory and fuzzy theory

  14. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  15. Methodological update in Medicina Intensiva.

    Science.gov (United States)

    García Garmendia, J L

    2018-04-01

    Research in the critically ill is complex by the heterogeneity of patients, the difficulties to achieve representative sample sizes and the number of variables simultaneously involved. However, the quantity and quality of records is high as well as the relevance of the variables used, such as survival. The methodological tools have evolved to offering new perspectives and analysis models that allow extracting relevant information from the data that accompanies the critically ill patient. The need for training in methodology and interpretation of results is an important challenge for the intensivists who wish to be updated on the research developments and clinical advances in Intensive Medicine. Copyright © 2017 Elsevier España, S.L.U. y SEMNIM. All rights reserved.

  16. Methodology for building confidence measures

    Science.gov (United States)

    Bramson, Aaron L.

    2004-04-01

    This paper presents a generalized methodology for propagating known or estimated levels of individual source document truth reliability to determine the confidence level of a combined output. Initial document certainty levels are augmented by (i) combining the reliability measures of multiply sources, (ii) incorporating the truth reinforcement of related elements, and (iii) incorporating the importance of the individual elements for determining the probability of truth for the whole. The result is a measure of confidence in system output based on the establishing of links among the truth values of inputs. This methodology was developed for application to a multi-component situation awareness tool under development at the Air Force Research Laboratory in Rome, New York. Determining how improvements in data quality and the variety of documents collected affect the probability of a correct situational detection helps optimize the performance of the tool overall.

  17. Design methodology of Dutch banknotes

    Science.gov (United States)

    de Heij, Hans A. M.

    2000-04-01

    Since the introduction of a design methodology for Dutch banknotes, the quality of Dutch paper currency has improved in more than one way. The methodology is question provides for (i) a design policy, which helps fix clear objectives; (ii) design management, to ensure a smooth cooperation between the graphic designer, printer, papermaker an central bank, (iii) a program of requirements, a banknote development guideline for all parties involved. This systematic approach enables an objective selection of design proposals, including security features. Furthermore, the project manager obtains regular feedback from the public by conducting market surveys. Each new design of a Netherlands Guilder banknote issued by the Nederlandsche Bank of the past 50 years has been an improvement on its predecessor in terms of value recognition, security and durability.

  18. Workshops as a Research Methodology

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    , and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  19. Methodological challenges and lessons learned

    DEFF Research Database (Denmark)

    Nielsen, Poul Erik; Gustafsson, Jessica

    2017-01-01

    Taking as point of departure three recently conducted empirical studies, the aim of this article is to theoretically and empirically discuss methodological challenges studying the interrelations between media and social reality and to critically reflect on the methodologies used in the studies....... By deconstructing the studies, the article draws attention to the fact that different methods are able to grasp different elements of social reality. Moreover, by analysing the power relations at play, the article demonstrated that the interplay between interviewer and interviewee, and how both parties fit...... into present power structures, greatly influence the narratives that are co-produced during interviews. The article thus concludes that in order to fully understand complex phenomena it is not just enough to use a mixture of methods, the makeup of the research team is also imperative, as a diverse team...

  20. Department of Energy's process waste assessment graded approach methodology

    International Nuclear Information System (INIS)

    Pemberton, S.E.

    1994-03-01

    As the initial phase of the formal waste minimization program, the Department of Energy requires assessments of all its waste-generating operations. These assessments, called process waste assessments (PWAs), are a tool which helps achieve the pollution prevention goals. The DOE complex is comprised of numerous sites located in many different states. The facilities as a whole represent a tremendous diversity of technologies, processes, and activities. Due to this diversity, there are also a wide variety and number of waste streams generated. Many of these waste streams are small, intermittent, and not of consistent composition. The PWA graded approach methodology addresses these complexities and recognizes that processes vary in the quantity of pollution they generate, as well as in the perceived risk and associated hazards. Therefore, the graded approach was developed to provide a cost-effective and flexible methodology which allows individual sites to prioritize their local concerns and align their efforts with the resources allocated. This presentation will describe a project sponsored by the DOE Office of Environmental Restoration and Waste Management, Waste Minimization Division, which developed a graded approach methodology for use throughout the DOE. This methodology was initiated in FY93 through a combined effort of the following DOE/Defense Program sites: Kansas City Plant, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Sandia National Laboratories. This presentation will describe the process waste assessment tool, benefits achieved through the completion of PWAs, DOE's graded approach methodology, and an update on the project's current status