Draft environmental statement related to the operation of River Bend Station (Docket No. 50-458)

International Nuclear Information System (INIS)

1984-07-01

This draft environmental statement contains the second assessment of the environmental impact associated with the operation of River Bend Station, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs

A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques

Science.gov (United States)

Schmidt, S.; Heyns, P. S.; de Villiers, J. P.

2018-02-01

In this paper, a fault diagnostic methodology is developed which is able to detect, locate and trend gear faults under fluctuating operating conditions when only vibration data from a single transducer, measured on a healthy gearbox are available. A two-phase feature extraction and modelling process is proposed to infer the operating condition and based on the operating condition, to detect changes in the machine condition. Information from optimised machine and operating condition hidden Markov models are statistically combined to generate a discrepancy signal which is post-processed to infer the condition of the gearbox. The discrepancy signal is processed and combined with statistical methods for automatic fault detection and localisation and to perform fault trending over time. The proposed methodology is validated on experimental data and a tacholess order tracking methodology is used to enhance the cost-effectiveness of the diagnostic methodology.

Draft environment statement related to operation of Moab uranium mill (Grand County, Utah)

International Nuclear Information System (INIS)

1977-11-01

This draft environmental impact statement was prepared by the staff of the U.S. Nuclear Regulatory Commission and issued by the Commission's Office of Nuclear Material Safety and Safeguards. The proposed action is the continuation of Source Material License SUA-917 issued to Atlas Corporation for the operation of the Atlas Uranium Mill in Grand County, Utah, near Moab (Docket No. 40-3453). This authorizes a 600-ton (450-MT) per day acid leach circuit (for recovery of vanadium as well as uranium) and a 600-ton (450-MT) per day alkaline leach circuit

The shape of natural draft cooling towers

International Nuclear Information System (INIS)

Grange, J.L.

1992-07-01

The shape of cooling towers is more often designed empirically. There, it is considered from a theoretical point of view. The analysis of dynamic of natural draft and of the air flow in a cooling tower shell is presented. It is shown, that although it is convergent, a tower works like a diffuser for pressure recovery. And it is turbulence that produces a transfer of kinetic energy and allows a good operation of the diffusor. The equations permit to define a shell profile which depends upon the operating conditions of the cooling tower. In the same way, a stability criteria for natural draft depending upon operating conditions is established. A heating model of one meter diameter has been built in a thermal similitude. The turbulence rate has been measured with a hot wire anemometer at the tower exit and visualizations have also been made. Natural draft stability has been studied by these means for four different shell shapes and a wide range of operating conditions. Experimental and theoretical results agree satisfactorily and experiments can be considered as a validation of theory

Design of a Kaplan turbine for a wide range of operating head -Curved draft tube design and model test verification-

Science.gov (United States)

KO, Pohan; MATSUMOTO, Kiyoshi; OHTAKE, Norio; DING, Hua

2016-11-01

As for turbomachine off-design performance improvement is challenging but critical for maximising the performing area. In this paper, a curved draft tube for a medium head Kaplan type hydro turbine is introduced and discussed for its significant effect on expanding operating head range. Without adding any extra structure and working fluid for swirl destruction and damping, a carefully designed outline shape of draft tube with the selected placement of center-piers successfully supresses the growth of turbulence eddy and the transport of the swirl to the outlet. Also, more kinetic energy is recovered and the head lost is improved. Finally, the model test results are also presented. The obvious performance improvement was found in the lower net head area, where the maximum efficiency improvement was measured up to 20% without compromising the best efficiency point. Additionally, this design results in a new draft tube more compact in size and so leads to better construction and manufacturing cost performance for prototype. The draft tube geometry parameter designing process was concerning the best efficiency point together with the off-design points covering various water net heads and discharges. The hydraulic performance and flow behavior was numerically previewed and visualized by solving Reynolds-Averaged Navier-Stokes equations with Shear Stress Transport turbulence model. The simulation was under the assumption of steady-state incompressible turbulence flow inside the flow passage, and the inlet boundary condition was the carefully simulated flow pattern from the runner outlet. For confirmation, the corresponding turbine efficiency performance of the entire operating area was verified by model test.

Development and application of the methodology to establish life extension and modernization plan of aged hydropower plants

International Nuclear Information System (INIS)

Kim, Jong Sung; Kwon, Hyuck Cheon; Song, Byung Hun; Kwon, Chang Seop

2009-01-01

This paper provides how to establish an integrated plan for LE (Life Extension) and MD (MoDernization) of aged hydropower plants. The methodology is developed through review of overseas/domestic LE/MD histories, investigation of the previous overseas methodologies and consideration of domestic practices. The methodology includes reviews of the various factors such as condition, operation and maintenance history, up-to-date technology, and economic benefit. In order to establish the life extension/modernization plan, the methodology is applied to the domestic aged hydropower plants. Finally, priority rankings and draft practice plans for LE/MD are derived.

Reservoir shorelines : a methodology for evaluating operational impacts

Energy Technology Data Exchange (ETDEWEB)

Lawrence, M.; Braund-Read, J.; Musgrave, B. [BC Hydro, Burnaby, BC (Canada)

2009-07-01

BC Hydro has been operating hydroelectric facilities for over a century in British Columbia. The integrity and stability of the shorelines and slopes bordering hydroelectric reservoirs is affected by changing water levels in the reservoir, natural processes of flooding, wind and wave action and modification of groundwater levels. Establishing setbacks landward of the shoreline are needed in order to protect useable shoreline property that may be at risk of flooding, erosion or instability due to reservoir operations. Many of the reservoirs in British Columbia are situated in steep, glaciated valleys with diverse geological, geomorphological and climatic conditions and a variety of eroding shorelines. As such, geotechnical studies are needed to determine the operational impacts on reservoir shorelines. Since the 1960s BC Hydro has been developing a methodology for evaluating reservoir impacts and determining the land around the reservoir perimeter that should remain as a right of way for operations while safeguarding waterfront development. The methodology was modified in the 1990s to include geomorphological and geological processes. However, uncertainties in the methodology still exist due to limited understanding of key issues such as rates of erosion and shoreline regression, immaturity of present day reservoir shorelines and impacts of climate change. 11 refs., 1 tab., 7 figs.

Operations management research methodologies using quantitative modeling

NARCIS (Netherlands)

Bertrand, J.W.M.; Fransoo, J.C.

2002-01-01

Gives an overview of quantitative model-based research in operations management, focusing on research methodology. Distinguishes between empirical and axiomatic research, and furthermore between descriptive and normative research. Presents guidelines for doing quantitative model-based research in

Methodology for Designing Operational Banking Risks Monitoring System

Science.gov (United States)

Kostjunina, T. N.

2018-05-01

The research looks at principles of designing an information system for monitoring operational banking risks. A proposed design methodology enables one to automate processes of collecting data on information security incidents in the banking network, serving as the basis for an integrated approach to the creation of an operational risk management system. The system can operate remotely ensuring tracking and forecasting of various operational events in the bank network. A structure of a content management system is described.

Systematic Methodology for Reproducible Optimizing Batch Operation

DEFF Research Database (Denmark)

Bonné, Dennis; Jørgensen, Sten Bay

2006-01-01

This contribution presents a systematic methodology for rapid acquirement of discrete-time state space model representations of batch processes based on their historical operation data. These state space models are parsimoniously parameterized as a set of local, interdependent models. The present...

Computational study of a low head draft tube and validation with experimental data

Energy Technology Data Exchange (ETDEWEB)

Henau, V De; Payette, F A; Sabourin, M [Alstom Power Systems, Hydro 1350 chemin Saint-Roch, Sorel-Tracy (Quebec), J3R 5P9 (Canada); Deschenes, C; Gagnon, J M; Gouin, P, E-mail: vincent.dehenau@power.alstom.co [Hydraulic Machinery Laboratory, Laval University 1065 ave. de la Medecine, Quebec (Canada)

2010-08-15

The objective of this paper is to investigate methodologies to improve the reliability of CFD analysis of low head turbine draft tubes. When only the draft tube performance is investigated, the study indicates that draft tube only simulations with an adequate treatment of the inlet boundary conditions for velocity and turbulence are a good alternative to rotor/stator (stage) simulations. The definition of the inlet velocity in the near wall regions is critical to get an agreement between the stage and draft tube only solutions. An average turbulent kinetic energy intensity level and average turbulent kinetic energy dissipation length scale are sufficient as turbulence inlet conditions as long as these averages are coherent with the stage solution. Comparisons of the rotor/stator simulation results to the experimental data highlight some discrepancies between the predicted draft tube flow and the experimental observations.

46 CFR 167.55-1 - Draft marks and draft indicating systems.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 167.55-1... NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... aft to the location of the draft marks, due to a raked stem or cut away skeg, the draft must be...

An alternative approach in operator allocation labor intensive manufacturing system: A three-phase methodology framework

Science.gov (United States)

Mat Rani, Ruzanita; Ismail, Wan Rosmanira

2013-04-01

Operator allocation is one of the most important decisions that can affect productivity in labor-intensive manufacturing system. Improper decision on operator allocation will reduce company's throughput and increase waste. Therefore, all factors such as operators' performance and operational constraints need to be considered in making the best operator allocation decision. Most of previous studies used two phases methodology. In two phases methodology, they used operational constraints and treated all operators to have the same level of performance for making decision on operator allocation. Therefore, in this paper a three-phase methodology is proposed to determine the optimal operator allocation. This methodology advances the existing approach on operator allocation by combining operators' performance and operational constraints. The methodology starts with evaluating the operators' performance. Then, it is followed with determining inputs and outputs for operator allocation alternatives and it ends with determining the optimal operator allocation. This paper will give ideas and directions to the management of the manufacturing company in determining the optimal operator allocation decision.

RCA annual report 1996. Draft

International Nuclear Information System (INIS)

1997-02-01

In accordance with Article VII.4 of the Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology 1987 and extended in 1992, a draft report of activities for the calendar year 1996 is submitted

Effect of supporting structure stiffness on the drive train assembly of an induced draft cooling tower under seismic effects

International Nuclear Information System (INIS)

Raghavan, N.; Ramasubramanian, S.; Khan, K.

2005-01-01

In a nuclear power project an induced draft cooling tower, as a safety-related structure and part of the main cooling system, has to perform satisfactorily under designated seismic effects. While the structural elements can be designed by conventional methods to ensure adequate safety, the seismic qualification of the mechanical components poses a challenge. The paper describes a methodology adopted for the seismic qualification of a typical Drive Train Assembly for the axial flow fan of an induced draft cooling tower, to ensure the structural integrity and functional operability of the assembly during Operating Base Earthquake and Safe Shutdown Earthquake conditions. This is achieved by performing a detailed finite element analysis of the rotating equipment assembly consisting of the electric motor, gear box and fan along with the drive shaft between the motor and the gear box. The various components are modeled using beam elements, plate elements and spring elements to idealize the flexible connections and supports. The floor response spectra derived from a dynamic analysis of the overall structure under stipulated seismic acceleration spectra are the main excitation inputs into the system. The results validate the adequacy of gaps for movement and the strengths of the couplings and bolts to withstand the applied loads. The assumed modeling and analysis methodology are seen to be acceptable procedures for seismic qualification of important components of the cooling tower. (authors)

Sloshing motion dynamics of a free surface in the draft tube cone of a Francis turbine operating in synchronous condenser mode

Science.gov (United States)

Vagnoni, Elena; Andolfatto, Loïc; Favrel, Arthur; Avellan, François

2016-11-01

The penetration of the electrical grid by intermittent renewable energy sources induces grid fluctuations which must be compensated in order to guarantee the stability of the grid. Hydropower plants can supply reactive power to ensure the grid stabilization by operating in condenser mode. In this operating mode, the turbine operates with the tail water depressed to let the runner spin in air to reduce the power consumption. Pressurized air is injected in the draft tube cone to maintain the water level below the runner and this induces air-water interaction phenomena which cause important power losses. Flow visualization and pressure fluctuation measurements are performed in a reduced scale physical model of a Francis turbine operating in condenser mode to investigate the dynamics of the air-water interaction in the draft tube cone which causes the sloshing motion of the free surface. An image post-processing method is developed, enabling a quantitative description of the sloshing motion. The latter depends on the Froude number. By increasing the value of the Froude number, the amplitude of the sloshing motion decreases, as well as the amplitude of the pressure fluctuations. The frequency of the sloshing motion corresponds to the first natural frequency of the water volume.

Draft supplement to final environmental statement related to construction and operation of Clinch River Breeder Reactor Plant. Docket No. 50-537

International Nuclear Information System (INIS)

1982-07-01

Information is presented concerning the site and environs; facility description; environmental impacts due to construction; environmental impacts of plant operation; environmental measurement and monitoring programs; environmental impacts of postulated accidents; need for the proposed facility; alternatives; evaluation of the proposed action; and discussion of comments received on the draft environmental statement

Experimental investigations of the unsteady flow in a Francis turbine draft tube cone

International Nuclear Information System (INIS)

Baya, A; Muntean, S; Campian, V C; Cuzmos, A; Diaconescu, M; Balan, G

2010-01-01

Operating Francis turbines at partial discharge is often hindered by the development of the helical vortex (so-called vortex rope) downstream the runner, in the draft tube cone. The unsteady pressure field induced by precessing vortex rope leads to pressure fluctuations. The paper presents the experimental investigations of the unsteady pressure field generated by precessing vortex rope and its associated pressure fluctuations into a draft tube of the Francis turbine operating at partial discharge. In situ measurements are performed in order to evaluate the pressure fluctuations and vortex rope frequency at partial load operation. Three pressure taps are installed on the cone wall of the draft tube in order to record the unsteady pressure. As a result, the Fourier spectra are obtained in order to evaluate the amplitude of pressure fluctuations and vortex rope frequency. Moreover, the wall pressure recovery along to the draft tube cone is acquired. Finally, conclusions are drawn in order to present the vortex rope effects.

Experimental investigations of the unsteady flow in a Francis turbine draft tube cone

Energy Technology Data Exchange (ETDEWEB)

Baya, A [Department of Hydraulic Machinery, ' Politehnica' University of Timisoara Bv. Mihai Viteazu 1, RO-300222, Timisoara (Romania); Muntean, S [Centre of Advanced Research in Engineering Sciences, Romanian Academy - Timisoara Branch Bv. Mihai Viteazu 24, RO-300223, Timisoara (Romania); Campian, V C; Cuzmos, A [Research Center in Hydraulics, Automation and Heat Transfer, ' Eftimie Murgu' University of Resita P-ta. Traian Vuia 1-4, RO-320085, Resita (Romania); Diaconescu, M; Balan, G, E-mail: abaya@mh.mec.upt.r [Ramnicu Valcea Subsidiary, S.C. Hidroelectrica S.A. Str. Decebal 11, RO-240255, Ramnicu Valcea (Romania)

2010-08-15

Operating Francis turbines at partial discharge is often hindered by the development of the helical vortex (so-called vortex rope) downstream the runner, in the draft tube cone. The unsteady pressure field induced by precessing vortex rope leads to pressure fluctuations. The paper presents the experimental investigations of the unsteady pressure field generated by precessing vortex rope and its associated pressure fluctuations into a draft tube of the Francis turbine operating at partial discharge. In situ measurements are performed in order to evaluate the pressure fluctuations and vortex rope frequency at partial load operation. Three pressure taps are installed on the cone wall of the draft tube in order to record the unsteady pressure. As a result, the Fourier spectra are obtained in order to evaluate the amplitude of pressure fluctuations and vortex rope frequency. Moreover, the wall pressure recovery along to the draft tube cone is acquired. Finally, conclusions are drawn in order to present the vortex rope effects.

CFD based draft tube hydraulic design optimization

International Nuclear Information System (INIS)

McNabb, J; Murry, N; Mullins, B F; Devals, C; Kyriacou, S A

2014-01-01

The draft tube design of a hydraulic turbine, particularly in low to medium head applications, plays an important role in determining the efficiency and power characteristics of the overall machine, since an important proportion of the available energy, being in kinetic form leaving the runner, needs to be recovered by the draft tube into static head. For large units, these efficiency and power characteristics can equate to large sums of money when considering the anticipated selling price of the energy produced over the machine's life-cycle. This same draft tube design is also a key factor in determining the overall civil costs of the powerhouse, primarily in excavation and concreting, which can amount to similar orders of magnitude as the price of the energy produced. Therefore, there is a need to find the optimum compromise between these two conflicting requirements. In this paper, an elaborate approach is described for dealing with this optimization problem. First, the draft tube's detailed geometry is defined as a function of a comprehensive set of design parameters (about 20 of which a subset is allowed to vary during the optimization process) and are then used in a non-uniform rational B-spline based geometric modeller to fully define the wetted surfaces geometry. Since the performance of the draft tube is largely governed by 3D viscous effects, such as boundary layer separation from the walls and swirling flow characteristics, which in turn governs the portion of the available kinetic energy which will be converted into pressure, a full 3D meshing and Navier-Stokes analysis is performed for each design. What makes this even more challenging is the fact that the inlet velocity distribution to the draft tube is governed by the runner at each of the various operating conditions that are of interest for the exploitation of the powerhouse. In order to determine these inlet conditions, a combined steady-state runner and an initial draft tube analysis

CFD based draft tube hydraulic design optimization

Science.gov (United States)

McNabb, J.; Devals, C.; Kyriacou, S. A.; Murry, N.; Mullins, B. F.

2014-03-01

The draft tube design of a hydraulic turbine, particularly in low to medium head applications, plays an important role in determining the efficiency and power characteristics of the overall machine, since an important proportion of the available energy, being in kinetic form leaving the runner, needs to be recovered by the draft tube into static head. For large units, these efficiency and power characteristics can equate to large sums of money when considering the anticipated selling price of the energy produced over the machine's life-cycle. This same draft tube design is also a key factor in determining the overall civil costs of the powerhouse, primarily in excavation and concreting, which can amount to similar orders of magnitude as the price of the energy produced. Therefore, there is a need to find the optimum compromise between these two conflicting requirements. In this paper, an elaborate approach is described for dealing with this optimization problem. First, the draft tube's detailed geometry is defined as a function of a comprehensive set of design parameters (about 20 of which a subset is allowed to vary during the optimization process) and are then used in a non-uniform rational B-spline based geometric modeller to fully define the wetted surfaces geometry. Since the performance of the draft tube is largely governed by 3D viscous effects, such as boundary layer separation from the walls and swirling flow characteristics, which in turn governs the portion of the available kinetic energy which will be converted into pressure, a full 3D meshing and Navier-Stokes analysis is performed for each design. What makes this even more challenging is the fact that the inlet velocity distribution to the draft tube is governed by the runner at each of the various operating conditions that are of interest for the exploitation of the powerhouse. In order to determine these inlet conditions, a combined steady-state runner and an initial draft tube analysis, using a

Rules of international law applicable to transfrontier pollution. Draft

International Nuclear Information System (INIS)

Anon.

1983-01-01

During the 1982 conference of the International Law Association (ILA) in Montreal the ILA discussed and adopted a draft of rules of international law applicable to transfrontier pollution. The draft presents criteria for the definition of transfrontier pollution and sets out rules for the prevention of such pollution and recommendations for a system of multilateral information, consultation, and co-operation in case of energy. (HP) [de

Draft environmental statement related to the operation of Millstone Nuclear Power Station, Unit No. 3 (Docket No. 50-423)

International Nuclear Information System (INIS)

1984-07-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with the operation of Millstone Nuclear Power Station, Unit 3, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs

Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

Science.gov (United States)

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

On random pressure pulses in the turbine draft tube

Science.gov (United States)

Kuibin, P. A.; Shtork, S. I.; Skripkin, S. G.; Tsoy, M. A.

2017-04-01

The flow in the conical part of the hydroturbine draft tube undergoes various instabilities due to deceleration and flow swirling at off-design operation points. In particular, the precessing vortex rope develops at part-load regimes in the draft tube. This rope induces periodical low-frequency pressure oscillations in the draft tube. Interaction of rotational (asynchronous) mode of disturbances with the elbow can bring to strong oscillations in the whole hydrodynamical system. Recent researches on flow structure in the discharge cone in a regime of free runner had revealed that helical-like vortex rope can be unstable itself. Some coils of helix close to each other and reconnection appears with generation of a vortex ring. The vortex ring moves toward the draft tube wall and downstream. The present research is focused on interaction of vortex ring with wall and generation of pressure pulses.

Lummi Bay Marina, Whatcom County, Washington. Draft Detailed Project Report and Draft Environmental Impact Statement.

Science.gov (United States)

1983-12-01

the eastern north Pacific Ocean at s *me season of the year, which are listed as endangered "jnder the Lndangercd Spc ;ici; hcL of 1973, and which...efficient vessel operation. The selection of channel depth was dependent upon the loaded draft of expected vessels, squat or sinkage. trim maneuverability

76 FR 57006 - Proposed Generic Communications; Draft NRC Regulatory Issue Summary 2011-XX; NRC Regulation of...

Science.gov (United States)

2011-09-15

... NUCLEAR REGULATORY COMMISSION 10 CFR Parts 30 and 150 [NRC-2011-0146] Proposed Generic Communications; Draft NRC Regulatory Issue Summary 2011-XX; NRC Regulation of Military Operational Radium-226... published for public comment the proposed draft RIS 2011-XX; NRC Regulation of Military Operational Radium...

76 FR 81998 - Methodology for Low Power/Shutdown Fire PRA

Science.gov (United States)

2011-12-29

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0295] Methodology for Low Power/Shutdown Fire PRA AGENCY..., ``Methodology for Low Power/Shutdown Fire PRA--Draft Report for Comment.'' DATES: Submit comments by March 01... risk assessment (PRA) method for quantitatively analyzing fire risk in commercial nuclear power plants...

Safety-related operator actions: methodology for developing criteria

International Nuclear Information System (INIS)

Kozinsky, E.J.; Gray, L.H.; Beare, A.N.; Barks, D.B.; Gomer, F.E.

1984-03-01

This report presents a methodology for developing criteria for design evaluation of safety-related actions by nuclear power plant reactor operators, and identifies a supporting data base. It is the eleventh and final NUREG/CR Report on the Safety-Related Operator Actions Program, conducted by Oak Ridge National Laboratory for the US Nuclear Regulatory Commission. The operator performance data were developed from training simulator experiments involving operator responses to simulated scenarios of plant disturbances; from field data on events with similar scenarios; and from task analytic data. A conceptual model to integrate the data was developed and a computer simulation of the model was run, using the SAINT modeling language. Proposed is a quantitative predictive model of operator performance, the Operator Personnel Performance Simulation (OPPS) Model, driven by task requirements, information presentation, and system dynamics. The model output, a probability distribution of predicted time to correctly complete safety-related operator actions, provides data for objective evaluation of quantitative design criteria

GIS Methodology for Planning Planetary-Rover Operations

Science.gov (United States)

Powell, Mark; Norris, Jeffrey; Fox, Jason; Rabe, Kenneth; Shu, I-Hsiang

2007-01-01

A document describes a methodology for utilizing image data downlinked from cameras aboard a robotic ground vehicle (rover) on a remote planet for analyzing and planning operations of the vehicle and of any associated spacecraft. Traditionally, the cataloging and presentation of large numbers of downlinked planetary-exploration images have been done by use of two organizational methods: temporal organization and correlation between activity plans and images. In contrast, the present methodology involves spatial indexing of image data by use of the computational discipline of geographic information systems (GIS), which has been maturing in terrestrial applications for decades, but, until now, has not been widely used in support of exploration of remote planets. The use of GIS to catalog data products for analysis is intended to increase efficiency and effectiveness in planning rover operations, just as GIS has proven to be a source of powerful computational tools in such terrestrial endeavors as law enforcement, military strategic planning, surveying, political science, and epidemiology. The use of GIS also satisfies the need for a map-based user interface that is intuitive to rover-activity planners, many of whom are deeply familiar with maps and know how to use them effectively in field geology.

Basic Drafting. Revised.

Science.gov (United States)

Schertz, Karen

This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

A methodology for nuclear power plant operational events evaluation

International Nuclear Information System (INIS)

Araujo, Jeferson

2015-01-01

to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

A methodology for nuclear power plant operational events evaluation

Energy Technology Data Exchange (ETDEWEB)

Araujo, Jeferson, E-mail: jeferson@cnen.gov.br [Comissao Nacional de Energia Nuclear (CGRC/CNEN), Rio de janeiro, RJ (Brazil). Coordenacao Geral de Reatores e do Ciclo de Combustivel; Costa, Sergio Dias, E-mail: sergiodiascosta@hotmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2015-07-01

to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

Clinical governance and operations management methodologies.

Science.gov (United States)

Davies, C; Walley, P

2000-01-01

The clinical governance mechanism, introduced since 1998 in the UK National Health Service (NHS), aims to deliver high quality care with efficient, effective and cost-effective patient services. Scally and Donaldson recognised that new approaches are needed, and operations management techniques comprise potentially powerful methodologies in understanding the process of care, which can be applied both within and across professional boundaries. This paper summarises four studies in hospital Trusts which took approaches to improving process that were different from and less structured than business process re-engineering (BPR). The problems were then amenable to change at a relatively low cost and short timescale, producing significant improvement to patient care. This less structured approach to operations management avoided incurring overhead costs of large scale and costly change such as new information technology (IT) systems. The most successful changes were brought about by formal tools to control quantity, content and timing of changes.

The use of 3D CADD (Computer Aided Design and Drafting) models in operation and maintenance cost reduction

International Nuclear Information System (INIS)

Didsbury, R.; Bains, N.; Cho, U.Y.

1998-01-01

The use of three dimensional(3D) computer-aided design and drafting(CADD) models, and the associated information technology and databases, in the engineering and construction phases of large projects is well established and yielding significant improvements in project cost, schedule and quality. The information contained in these models can also be extremely valuable to operating plants, particularly when the visual and spatial information contained in the 3D models is interfaced to other plant information databases. Indeed many plant owners and operators in the process and power industries are already using this technology to assist with such activities as plant configuration management, staff training, work planning and radiation protection. This paper will explore the application of 3D models and the associated databases in an operating plant environment and describe the resulting operational benefits and cost reduction benefits. Several industrial experience case studies will be presented along with suggestions for further future applications. (author). 4 refs., 1 tab., 8 figs

Draft Environmental Statement related to the operation of Vogtle Electric Generating Plant, Units 1 and 2 (Docket Nos. 50-424 and 50-425)

International Nuclear Information System (INIS)

1984-10-01

This Draft Environmental Statement contains an assessment of the environmental impact associated with the operation of the Vogtle Electric Generating Plant, Units 1 and 2, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, part 51 (10 CFR 51), as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environmental impacts, environmental consequences and mitigating actions, and environmental and economic benefits and costs associated with station operation

Milestone 4.1 ∙ First draft on complemented LCA methodology

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Olsen, Stig Irving; Hauschild, Michael Zwicky

As described in deliverable 4.1, D4.1 (Larsen et al. 2007) NEPTUNE is using two main types of life cycle impact assessment (LCIA) methodologies when doing LCA studies on the waste water treatment technologies included. The basic methodology is the well known existing EDIP97 methodology (Wenzel et...

Draft Function Allocation Framework and Preliminary Technical Basis for Advanced SMR Concepts of Operations

Energy Technology Data Exchange (ETDEWEB)

Jacques Hugo; John Forester; David Gertman; Jeffrey Joe; Heather Medema; Julius Persensky; April Whaley

2013-04-01

This report presents preliminary research results from the investigation in to the development of new models and guidance for concepts of operations (ConOps) in advanced small modular reactor (aSMR) designs. In support of this objective, three important research areas were included: operating principles of multi-modular plants, functional allocation models and strategies that would affect the development of new, non-traditional concept of operations, and the requiremetns for human performance, based upon work domain analysis and current regulatory requirements. As part of the approach for this report, we outline potential functions, including the theoretical and operational foundations for the development of a new functional allocation model and the identification of specific regulatory requirements that will influence the development of future concept of operations. The report also highlights changes in research strategy prompted by confirmationof the importance of applying the work domain analysis methodology to a reference aSMR design. It is described how this methodology will enrich the findings from this phase of the project in the subsequent phases and help in identification of metrics and focused studies for the determination of human performance criteria that can be used to support the design process.

76 FR 62087 - Draft Conservation Plan and Draft Environmental Assessment; Dunes Sagebrush Lizard, Texas

Science.gov (United States)

2011-10-06

...] Draft Conservation Plan and Draft Environmental Assessment; Dunes Sagebrush Lizard, Texas AGENCY: Fish... draft Texas Conservation Plan for the Dunes Sagebrush Lizard (TCP). The draft TCP will function as a... the Applicant for the dunes sagebrush lizard (Sceloporus arenicolus) throughout its range in Texas...

Modeling Methodologies for Representing Urban Cultural Geographies in Stability Operations

National Research Council Canada - National Science Library

Ferris, Todd P

2008-01-01

... 2.0.0, in an effort to provide modeling methodologies for a single simulation tool capable of exploring the complex world of urban cultural geographies undergoing Stability Operations in an irregular warfare (IW) environment...

31 CFR 500.406 - Drafts under irrevocable letters of credit; documentary drafts.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Drafts under irrevocable letters of credit; documentary drafts. 500.406 Section 500.406 Money and Finance: Treasury Regulations Relating to... ASSETS CONTROL REGULATIONS Interpretations § 500.406 Drafts under irrevocable letters of credit...

31 CFR 515.406 - Drafts under irrevocable letters of credit; documentary drafts.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Drafts under irrevocable letters of credit; documentary drafts. 515.406 Section 515.406 Money and Finance: Treasury Regulations Relating to... CONTROL REGULATIONS Interpretations § 515.406 Drafts under irrevocable letters of credit; documentary...

Behavioral issues in operations management new trends in design, management, and methodologies

CERN Document Server

2013-01-01

Behavioral Operations Management  has been identified in the last years as one of the most promising emerging fields in Operations Management. Behavioral Issues in Operations Management  explains and examines up-to-date research in this field, which works to analyze the impact of human behavior on the management of complex operating systems.   A collection of studies from leading scholars presents different methodologies and approaches, supported by real data and case studies. Issues such as building trust and strong cooperative relationships with suppliers, enhancing motivation and designing proper incentives for stimulating more effective decision maker behaviours are considered. The main decision-making processes affected by behavioral issues are also analyzed with a focus on new product development, logistics, and supply chain integration.   The broad coverage of methodologies and practical implications makes Behavioral Issues in Operations Management an ideal reference for both researchers developing...

Drafting method of electricity and electron design

International Nuclear Information System (INIS)

Gungbon, Junchun

1989-11-01

This book concentrates on drafting of electricity and electron design. It deals with The meaning of electricity and electron drafting JIS standard regulation the types of drafting and line and letter, basics drafting with projection drafting method, plan projection and development elevation, Drafting method of shop drawing, practical method of design and drafting, Design and drafting of technic and illustration, Connection diagram, Drafting of wiring diagram for light and illumination, Drafting of development connection diagram for sequence control, Drafting of logic circuit sign of flow chart and manual, drafting for a electron circuit diagram and Drawing of PC board.

Energy transformation and flow topology in an elbow draft tube

Directory of Open Access Journals (Sweden)

Štefan D.

2012-06-01

Full Text Available Paper presents a computational study of energy transformation in two geometrical configurations of Kaplan turbine elbow draft tube. Pressure recovery, hydraulic efficiency and loss coefficient are evaluated for a series of flow rates and swirl numbers corresponding to operating regimes of the turbine. These integral characteristics are then correlated with local flow field properties identified by extraction of topological features. Main focus is to find the reasons for hydraulic efficiency drop of the elbow draft tube.

76 FR 34097 - Notice of Availability of the Draft Environmental Impact Statement, Including a Draft...

Science.gov (United States)

2011-06-10

... Impact Statement, Including a Draft Programmatic Agreement, for the Clark, Lincoln, and White Pine...) has prepared a Draft Environmental Impact Statement (EIS) and a Draft Programmatic Agreement (PA.... 100 N., Nephi Beaver Library, 55 W. Center St., Beaver. The Draft EIS describes and analyzes SNWA's...

General Drafting. Technical Manual.

Science.gov (United States)

Department of the Army, Washington, DC.

The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

75 FR 29785 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-05-27

... ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc... NUCLEAR REGULATORY COMMISSION [NRC-2010-0187] Draft Regulatory Guide: Issuance, Availability... Guide, DG-1248, ``Nuclear Power Plant Simulation Facilities for Use in Operator Training, License...

Space and time reconstruction of the precessing vortex core in Francis turbine draft tube by 2D-PIV

Science.gov (United States)

Favrel, A.; Müller, A.; Landry, C.; Yamamoto, K.; Avellan, F.

2016-11-01

Francis turbines operating at part load conditions experience the development of a high swirling flow at the runner outlet, giving rise to the development of a cavitation precessing vortex rope in the draft tube. The latter acts as an excitation source for the hydro-mechanical system and may jeopardize the system stability if resonance conditions are met. Although many aspects of the part load issue have been widely studied in the past, the accurate stability analysis of hydro-power plants remains challenging. A better understanding of the vortex rope dynamics in a wide range of operating conditions is an important step towards the prediction and the transposition of the pressure fluctuations from reduced to prototype scale. For this purpose, an investigation of the flow velocity fields at the outlet of a Francis turbine reduced scale physical model operating at part load conditions is performed by means of 2D-PIV in three different horizontal cross-sections of the draft tube cone. The measurements are performed in cavitation-free conditions for three values of discharge factor, comprised between 60% and 81% of the value at the Best Efficiency Point. The present article describes a detailed methodology to properly recover the evolution of the velocity fields during one precession cycle by means of phase averaging. The vortex circulation is computed and the vortex trajectory over one typical precession period is finally recovered for each operating point. It is notably shown that below a given value of the discharge factor, the vortex dynamics abruptly change and loose its periodicity and coherence.

76 FR 57767 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

Science.gov (United States)

2011-09-16

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0204] Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for Operating Reactors AGENCY: Nuclear Regulatory Commission... FR 54507), that requested public comment on Draft NRC Generic Letter 2011- XX: Seismic Risk...

Frescoed Vaults: Accuracy Controlled Simplified Methodology for Planar Development of Three-Dimensional Textured Models

Directory of Open Access Journals (Sweden)

Marco Giorgio Bevilacqua

2016-03-01

Full Text Available In the field of documentation and preservation of cultural heritage, there is keen interest in 3D metric viewing and rendering of architecture for both formal appearance and color. On the other hand, operative steps of restoration interventions still require full-scale, 2D metric surface representations. The transition from 3D to 2D representation, with the related geometric transformations, has not yet been fully formalized for planar development of frescoed vaults. Methodologies proposed so far on this subject provide transitioning from point cloud models to ideal mathematical surfaces and projecting textures using software tools. The methodology used for geometry and texture development in the present work does not require any dedicated software. The different processing steps can be individually checked for any error introduced, which can be then quantified. A direct accuracy check of the planar development of the frescoed surface has been carried out by qualified restorers, yielding a result of 3 mm. The proposed methodology, although requiring further studies to improve automation of the different processing steps, allowed extracting 2D drafts fully usable by operators restoring the vault frescoes.

Draft environmental statement related to the operation of Limerick Generating Station, Units 1 and 2. Docket Nos. 50-352 and 50-353

International Nuclear Information System (INIS)

1983-06-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with the operation of the Limerick Generating Station, Units 1 and 2, pursuant to the National Environment Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs. Land use and terrestrial and aquatic ecological impacts will be small. Operational impacts to historic and archeological sites will be negligible. The effects of routine operations, energy transmission, and periodic maintenance of rights of way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity

10 CFR 51.74 - Distribution of draft environmental impact statement and supplement to draft environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement and supplement to draft environmental impact statement; news releases. 51.74 Section 51.74 Energy NUCLEAR... Impact Statements § 51.74 Distribution of draft environmental impact statement and supplement to draft...

An experimental and multi-objective optimization study of a forced draft cooling tower with different fills

International Nuclear Information System (INIS)

Singh, Kuljeet; Das, Ranjan

2016-01-01

Highlights: • Experimental and optimization study on forced draft cooling tower is done. • New correlations for splash, trickle and film type fills are proposed. • Multi-objective performance optimization study has been done using NSGA-II. • Weighted decision making criterion is proposed depending upon user priority. • Proposed generalized methodology can be implemented in industrial cooling towers. - Abstract: In the present study, a forced draft mechanical cooling tower has been experimentally investigated using trickle, film and splash fills. Various performance parameters such as range, tower characteristic ratio, effectiveness and water evaporation rate are first analyzed for each fill. Thereafter, based upon the experimental data, pertinent correlations have been developed for performance parameters by considering mass flow rates of water and air as design variables. Each of the performance parameters is considered to be an individual objective function and all objectives are then simultaneously optimized for maximizing the performance of the cooling tower using elitist Non-Dominated Sorting Genetic Algorithm (NSGA-II). The multi-objective optimization algorithm gives a set of possible combinations of design variables, which is referred as the optimal Pareto-front, out of which a unique combination is selected based upon a decision making criterion. The proposed decision making procedure evaluates a Decision Making Score (DMS) based on assigned performance priorities for each point of the Pareto-front. Depending on DMS a unique combination of design variables is then selected for each type of fill that maximizes the tower’s performance. These optimal points and the corresponding objective function are finally compared and based upon the highest DMS value, the wire-mesh (trickle) fill is found to be the most efficient fill under the present experimental conditions. The methodology presented in this work has been made more generalized, so that it

Draft genome sequence of chloride-tolerant Leptospirillum ferriphilum Sp-Cl from industrial bioleaching operations in northern Chile.

Science.gov (United States)

Issotta, Francisco; Galleguillos, Pedro A; Moya-Beltrán, Ana; Davis-Belmar, Carol S; Rautenbach, George; Covarrubias, Paulo C; Acosta, Mauricio; Ossandon, Francisco J; Contador, Yasna; Holmes, David S; Marín-Eliantonio, Sabrina; Quatrini, Raquel; Demergasso, Cecilia

2016-01-01

Leptospirillum ferriphilum Sp-Cl is a Gram negative, thermotolerant, curved, rod-shaped bacterium, isolated from an industrial bioleaching operation in northern Chile, where chalcocite is the major copper mineral and copper hydroxychloride atacamite is present in variable proportions in the ore. This strain has unique features as compared to the other members of the species, namely resistance to elevated concentrations of chloride, sulfate and metals. Basic microbiological features and genomic properties of this biotechnologically relevant strain are described in this work. The 2,475,669 bp draft genome is arranged into 74 scaffolds of 74 contigs. A total of 48 RNA genes and 2,834 protein coding genes were predicted from its annotation; 55 % of these were assigned a putative function. Release of the genome sequence of this strain will provide further understanding of the mechanisms used by acidophilic bacteria to endure high osmotic stress and high chloride levels and of the role of chloride-tolerant iron-oxidizers in industrial bioleaching operations.

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

Integrated management of operations in Santos Basin: methodology applied to a new philosophy of operations

Energy Technology Data Exchange (ETDEWEB)

Pereira, Leandro Leonardo; Lima, Claudio Benevenuto de Campos [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil); Derenzi Neto, Dario [Accenture, Rio de Janeiro, RJ (Brazil); Pinto, Vladimir Steffen [Soda IT, Rio de Janeiro, RJ (Brazil); Lima, Gilson Brito Alves [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2012-07-01

The objective of this paper is to present the methodology used to develop the Integrated Management of Operations (GIOp) project in Santos Basin Operational Unit (UO-BS) in the South-Southeast Exploration and Production area of PETROBRAS. The following text describes how the activities were carried out to gather improvements opportunities and to design To-Be processes, considering the challenging environment of the Santos Basin in the coming years. At the end of more than 12 months of work, more than 50 processes and sub-processes were redesigned, involving a multidisciplinary team in the areas of operations, maintenance, safety, health and environment, flow assurance, wells, reservoirs and planning. (author)

Experimental investigation of the sloshing motion of the water free surface in the draft tube of a Francis turbine operating in synchronous condenser mode

Science.gov (United States)

Vagnoni, Elena; Favrel, Arthur; Andolfatto, Loïc; Avellan, François

2018-06-01

Hydropower units may be required to operate in condenser mode to supply reactive power. In this operating mode, the water level in the turbine or pump-turbine is decreased below the runner by closing the guide vanes and injecting pressurized air. While operating in condenser mode the machine experiences power losses due to several air-water interaction phenomena which cause air losses. One of such phenomena is the sloshing motion of the water free surface below the runner in the draft tube cone of a Francis turbine. The objective of the present work is to experimentally investigate the sloshing motion of the water free surface in the draft tube cone of a reduced scale physical model of a Francis turbine operating in condenser mode. Images acquisition and simultaneous pressure fluctuation measurements are performed and an image processing method is developed to investigate amplitude and frequency of the sloshing motion of the free surface. It is found that this motion is excited at the natural frequency of the water volume and corresponds to the azimuthal wavenumber m = 1 of a rotating gravity wave. The amplitude of the motion is perturbed by wave breaking and it decreases by increasing the densimetric Froude number. The sloshing frequency slightly increases with respect to the natural frequency of the water volume by increasing the densimetric Froude number. Moreover, it results that this resonant phenomenon is not related to the torque perturbation.

Approaches to assessment of socio-demographic and economic aspects of nuclear power plant construction and operation

International Nuclear Information System (INIS)

Uvirova, E.

1984-01-01

The paper informs of solving the task of economic evaluation of transient and permanent social consequences of the construction and operation of nuclear power plants. The solution takes place in three stages: 1. drafting of methodology, 2. trial of methodology in localities of current nuclear power plant construction, 3. analysis of results and finalizing of methodology. The task is aimed at studying the questions of the return and profitability of investments, the evaluation of optimal economic lifetime, and the effective restoration of basic funds. Its model solution shows the national economy relations of nuclear power. Also discussed is the question of the use of non-balance heat from nuclear power plants. (E.S.)

An introduction and overview of DRAFT CSA Standard N288.7 Groundwater Protection at Class I Nuclear Facilities and Uranium Mines and Mills

Energy Technology Data Exchange (ETDEWEB)

DeWilde, J., E-mail: john_dewilde@golder.com [Golder Associates Ltd., Whitby, ON (Canada); Klukas, M.; Audet, M., E-mail: marc.audet@cnl.ca [Canadian Nuclear Laboratories, Chalk River, ON (Canada)

2015-07-01

The DRAFT CSA Standard N288.7 entitled Groundwater Protection at Class I Nuclear Facilities and Uranium Mines and Mills is currently under development and is anticipated to publish in June of 2015. This draft standard identifies a process for the protection and monitoring of groundwater at nuclear facilities but may also be used at any facility (i.e. nuclear facilities that are not Class I or non-nuclear facilities). The paper discusses the background to the draft standard, the formalized methodology described in the draft standard and provides some input on implementation. The paper is intended for people that have responsibilities related to groundwater protection at facilities that may need to comply with the draft standard or any site/facility that has some form of groundwater monitoring program. (author)

78 FR 73555 - Deepwater Horizon Oil Spill; Draft Programmatic and Phase III Early Restoration Plan and Draft...

Science.gov (United States)

2013-12-06

... Environmental Impact Statement (Draft Phase III ERP/PEIS). The Draft Phase III ERP/PEIS considers programmatic... programmatic restoration alternatives. The Draft Phase III ERP/PEIS evaluates these restoration alternatives... the Framework Agreement. The Draft Phase III ERP/PEIS also evaluates the environmental consequences of...

Effects of draft tube on the hydraulic performance of a Francis turbine

International Nuclear Information System (INIS)

Jeon, J H; Byeon, S S; Kim, Y J

2013-01-01

The draft tube is an important component of a Francis turbine which influences the hydraulic performance. It is located just under the runner and allowed to decelerate the flow velocity exiting the runner, thereby converting the excess of kinetic energy into static pressure. In this study, we have numerically investigated the hydraulic performance of a Francis turbine on the 15MW hydropower generation with various design parameters (three types of draft tube, thickness of guide vane) through a three-dimensional numerical method with the SST turbulent model. The vortex rope characteristics of the draft tube were confirmed. The results of the vortex flow fields and flow characteristics were graphically depicted with different design parameters and operating conditions

EPA scientific integrity policy draft

Science.gov (United States)

Showstack, Randy

2011-08-01

The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

Relay chatter and operator response after a large earthquake: An improved PRA methodology with case studies

International Nuclear Information System (INIS)

Budnitz, R.J.; Lambert, H.E.; Hill, E.E.

1987-08-01

The purpose of this project has been to develop and demonstrate improvements in the PRA methodology used for analyzing earthquake-induced accidents at nuclear power reactors. Specifically, the project addresses methodological weaknesses in the PRA systems analysis used for studying post-earthquake relay chatter and for quantifying human response under high stress. An improved PRA methodology for relay-chatter analysis is developed, and its use is demonstrated through analysis of the Zion-1 and LaSalle-2 reactors as case studies. This demonstration analysis is intended to show that the methodology can be applied in actual cases, and the numerical values of core-damage frequency are not realistic. The analysis relies on SSMRP-based methodologies and data bases. For both Zion-1 and LaSalle-2, assuming that loss of offsite power (LOSP) occurs after a large earthquake and that there are no operator recovery actions, the analysis finds very many combinations (Boolean minimal cut sets) involving chatter of three or four relays and/or pressure switch contacts. The analysis finds that the number of min-cut-set combinations is so large that there is a very high likelihood (of the order of unity) that at least one combination will occur after earthquake-caused LOSP. This conclusion depends in detail on the fragility curves and response assumptions used for chatter. Core-damage frequencies are calculated, but they are probably pessimistic because assuming zero credit for operator recovery is pessimistic. The project has also developed an improved PRA methodology for quantifying operator error under high-stress conditions such as after a large earthquake. Single-operator and multiple-operator error rates are developed, and a case study involving an 8-step procedure (establishing feed-and-bleed in a PWR after an earthquake-initiated accident) is used to demonstrate the methodology

Experimental investigation of vortex control with an axial jet in the draft tube of a model pump-turbine

International Nuclear Information System (INIS)

Kirschner, O; Schmidt, H; Ruprecht, A; Mader, R; Meusburger, P

2010-01-01

The operation of hydropower plants, especially of pump-storage plants, changes since the deregulation of the energy market. They are increasingly operating at off-design conditions in order to follow the demand in the electrical grid. Therefore the ability of hydropower plants handling the operation in a wide range of off-design conditions has become more important. In this context one problem is the vortex rope in the draft tube, especially for Francis turbines and pump-turbines running in part load. An experimental investigation in mitigation of the vortex rope phenomenon by injecting water axially in the centre of the draft tube on a pump-turbine model was carried out. Also the mitigation by additionally injected air in the centre of the draft tube was analysed. The results of the experimental investigation are focused on the reduction of the pressure fluctuations in the draft tube. In this paper two different part-load operating points were investigated. One of these operating points is a high part load operating point where a vortex rope exists. The other one is a low part load operating point, where the pressure fluctuation is not caused by a vortex rope. The results of the investigation show, that the injection of stabilizing water can mitigate the pressure fluctuation caused by a vortex rope. But the investigation of operating points where the pressure fluctuation is not caused by a vortex rope shows, that there is no significant reduction in the pressure fluctuation by this method. In these operating points the method of injecting additionally air reduces the pressure fluctuation better.

Experimental investigation of vortex control with an axial jet in the draft tube of a model pump-turbine

Energy Technology Data Exchange (ETDEWEB)

Kirschner, O; Schmidt, H; Ruprecht, A [Institute of Fluid Mechanics and Hydraulic Machinery, University of Stuttgart, Pfaffenwaldring 10, 70550 Stuttgart (Germany); Mader, R; Meusburger, P, E-mail: kirschner@ihs.uni-stuttgart.d [Vorarlberger Illwerke A G, atloggstrasse 36, 6780 Schruns (Austria)

2010-08-15

The operation of hydropower plants, especially of pump-storage plants, changes since the deregulation of the energy market. They are increasingly operating at off-design conditions in order to follow the demand in the electrical grid. Therefore the ability of hydropower plants handling the operation in a wide range of off-design conditions has become more important. In this context one problem is the vortex rope in the draft tube, especially for Francis turbines and pump-turbines running in part load. An experimental investigation in mitigation of the vortex rope phenomenon by injecting water axially in the centre of the draft tube on a pump-turbine model was carried out. Also the mitigation by additionally injected air in the centre of the draft tube was analysed. The results of the experimental investigation are focused on the reduction of the pressure fluctuations in the draft tube. In this paper two different part-load operating points were investigated. One of these operating points is a high part load operating point where a vortex rope exists. The other one is a low part load operating point, where the pressure fluctuation is not caused by a vortex rope. The results of the investigation show, that the injection of stabilizing water can mitigate the pressure fluctuation caused by a vortex rope. But the investigation of operating points where the pressure fluctuation is not caused by a vortex rope shows, that there is no significant reduction in the pressure fluctuation by this method. In these operating points the method of injecting additionally air reduces the pressure fluctuation better.

78 FR 64493 - Juneau Hydropower, Inc.; Notice of Subsequent Draft License Application (DLA) and Draft...

Science.gov (United States)

2013-10-29

... Hydropower, Inc.; Notice of Subsequent Draft License Application (DLA) and Draft Preliminary Draft... Hydropower, Inc. e. Name of Project: Sweetheart Lake Hydroelectric Project. f. Location: At the confluence of..., Business Manager, Juneau Hydropower, Inc., P.O. Box 22775, Juneau, AK 99802; 907-789-2775, email: duff...

Methodology for performing surveys for fixed contamination

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1994-10-01

This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

77 FR 14716 - Notice of Availability: Draft Documents Related to the Development of Emissions Estimating...

Science.gov (United States)

2012-03-13

..., Tyson Foods, Inc. collected data from two broiler sites, which are also included in the NAEMS dataset... ), and volatile organic compounds (VOCs). For lagoons and basins, the study was designed to collect NH 3... draft documents describe the sites monitored, the statistical methodology used to analyze the data, and...

75 FR 29534 - Inorganic Nitrates-Nitrite, Carbon and Carbon Dioxide, and Sulfur Registration Review; Draft...

Science.gov (United States)

2010-05-26

..., among other things, the Agency's risk assessment methodologies and assumptions, as applied to this draft... and will be publicly available only in hard copy form. Publicly available docket materials are available either in the electronic docket at http://www.regulations.gov , or, if only available in hard copy...

Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines

Directory of Open Access Journals (Sweden)

M Barzegar Tabrizi

2017-10-01

Full Text Available Introduction Improving the efficiency of all agricultural operations has always been important for farmers and engineers. It is well known that the force required for cutting a soil using narrow blades is a function of soil and environmental physical properties, tool shape geometry and the tool’s surface characteristics like soil-tool adhesion and friction. Soil tool adhesion can reduce ploughing efficiency and quality. It may also halt the movement of tillage machines in more severe conditions. Adhesion can also disable some machine abilities, which can result in a significant reduction of machine performance. Adhesion of the soil to seed-bed preparation tools like furrowers can significantly affect the germination rate. Reducing soil tool adhesion of furrowers can reduce draft force and improve ploughing efficiency. Many researchers have worked on methods of reducing draft force by modifying the surface material and/or surface texture of the plough tools. A good prediction on draft force of a tool before producing it has always been important for farmers and engineers. There are some models for predicting the draft force of narrow blades in soil. McKyes-Ali’s model is widely used because of its accuracy and simplicity. Ultra-high molecular weight polythene (UHMW-PE is a polymer with ultra-high weight and long molecular chains and is well known for its outstanding physical and chemical properties and self-cleaning abilities, which reduce soil-tool adhesion. The aim of this study was to investigate usability of UHMW-PE coated furrower tines for draft force. Analytical and experimental investigations were carried out during the research. A comparison was conducted between the analytical and the experimental method. The results of this comparison can be used to determine reliability of the analytical model for predicting the draft force improvement caused by the surface modification on tines using different surface coatings. Materials and

Cassini's Test Methodology for Flight Software Verification and Operations

Science.gov (United States)

Wang, Eric; Brown, Jay

2007-01-01

The Cassini spacecraft was launched on 15 October 1997 on a Titan IV-B launch vehicle. The spacecraft is comprised of various subsystems, including the Attitude and Articulation Control Subsystem (AACS). The AACS Flight Software (FSW) and its development has been an ongoing effort, from the design, development and finally operations. As planned, major modifications to certain FSW functions were designed, tested, verified and uploaded during the cruise phase of the mission. Each flight software upload involved extensive verification testing. A standardized FSW testing methodology was used to verify the integrity of the flight software. This paper summarizes the flight software testing methodology used for verifying FSW from pre-launch through the prime mission, with an emphasis on flight experience testing during the first 2.5 years of the prime mission (July 2004 through January 2007).

75 FR 63519 - Notice of Availability of Draft Environmental Assessment and Draft Finding of No Significant...

Science.gov (United States)

2010-10-15

... reduced for certain environmental resource areas (i.e., for transportation, public and occupational health... NUCLEAR REGULATORY COMMISSION [NRC-2009-0435] Notice of Availability of Draft Environmental... of Availability of Draft Environmental Assessment and Draft Finding of No Significant Impact; Notice...

75 FR 58369 - Intent To Prepare a Draft Environmental Impact Statement for the North Branch Ecorse Creek, Flood...

Science.gov (United States)

2010-09-24

... Draft EIS will address potential environmental impacts of the construction, operation, and maintenance... Environmental Impact Statement for the North Branch Ecorse Creek, Flood Risk Management General Reevaluation... Notice of Intent (NOI) to prepare a Draft Environmental Impact Statement (EIS) for flood risk management...

Methodology of synchronization among strategy and operation. A standards-based modeling approach

Directory of Open Access Journals (Sweden)

VICTOR EDWIN COLLAZOS

2017-05-01

Full Text Available Enterprise Architecture (EA has gained importance in recent years, mainly for its concept of “alignment” between the strategic and operational levels of organizations. Such alignment occurs when Information Technology (IT is applied correctly and timely, working in synergy and harmony with strategy and the operation to achieve mutually their own goals and satisfy the organizational needs.Both the strategic and operational levels have standards that help model elements necessary to obtain desired results. In this sense, BMM and BPMN were selected because both have the support of OMG and they are fairly well known for modelling the strategic level and operational level, respectively. In addition, i* modeling goal can be used for reducing the gap between these two standards. This proposal may help both the high-level design of the information system and to the appropriate identification of the business processes that will support it.This paper presents a methodology for aligning strategy and the operation based on standards and heuristics. We have made a classification for elements of the models and, for some specific cases, an extension of the heuristics associated between them. This allows us to propose methodology, which uses above-mentioned standards and combines mappings, transformations and actions to be considered in the alignment process.

D1.5 WEKIT Framework and Training Methodology

NARCIS (Netherlands)

Limbu, Bibeg

2017-01-01

The document reports on the status of the WEKIT framework. Building up on the methodologies described in D1.3, it outlines the work done and progress made so far in the Task 1.3. The WEKIT framework was drafted to guide and support the development and implementation of the project. It aims to

Soviet-designed pressurized water reactor symptomatic emergency operating instruction analytical procedure: approach, methodology, development and application

International Nuclear Information System (INIS)

Beelman, R.J.

1999-01-01

A symptom approach to the analytical validation of symptom-based EOPs includes: (1) Identification of critical safety functions to the maintenance of fission product barrier integrity; (2) Identification of the symptoms which manifest an impending challenge to critical safety function maintenance; (3) Development of a symptomatic methodology to delineate bounding plant transient response modes; (4) Specification of bounding scenarios; (5) Development of a systematic calculational approach consistent with the objectives of the methodology; (6) Performance of thermal-hydraulic computer code calculations implementing the analytical methodology; (7) Interpretation of the analytical results on the basis of information available to the operator; (8) Application of the results to the validation of the proposed operator actions; (9) Production of a technical basis document justifying the proposed operator actions. (author)

Tutorials on emerging methodologies and applications in operations research

CERN Document Server

2005-01-01

Operations Research emerged as a quantitative approach to problem-solving in World War II. Its founders, who were physicists, mathematicians, and engineers, quickly found peace-time uses for this new field. Moreover, we can say that Operations Research (OR) was born in the same incubator as computer science, and through the years, it has spawned many new disciplines, including systems engineering, health care management, and transportation science. Fundamentally, Operations Research crosses discipline domains to seek solutions on a range of problems and benefits diverse disciplines from finance to bioengineering. Many disciplines routinely use OR methods. Many scientific researchers, engineers, and others will find the methodological presentations in this book useful and helpful in their problem-solving efforts. OR’s strengths are modeling, analysis, and algorithm design. It provides a quantitative foundation for a broad spectrum of problems, from economics to medicine, from environmental control to sports,...

Accelerating Cleanup: Focus on 2006. Discussion draft

International Nuclear Information System (INIS)

1997-01-01

This executive summary addresses the activities associated with the National Transuranic (TRU) Program managed by the Carlsbad Area Office (CAO). The CAO programmatically reports to the Assistant Secretary for Environmental Management and receives administrative support through the Albuquerque Operations Office. The mission of the Carlsbad Area Office (CAO) is to protect human health and the environment by opening and operating the Waste Isolation Pilot Plant for site disposal of TRU waste and by establishing an effective system for management of TRU waste from generation to disposal. It includes personnel assigned to the CAO, the Waste Isolation Pilot Plant (WIPP) site operations, and other activities associated with the National TRU Program. The CAO develops and directs implementation of the program, while the DOE Headquarters establishes policy and guidelines. The CAO assesses compliance with the program guidance, as well as the commonality of activities and assumptions among all the sites. Since the development of the February 28, 1997, database used to develop this Discussion Draft, the opening of the WIPP facility for receipt of Contact Handled waste has been delayed from November 1997 to May 1998. This slippage is significant enough to require a change in the milestones and volumes included in the documents to be reviewed by our stakeholders. Changes have been incorporated into this Discussion Draft and its supporting Project Baseline Summaries (PBSs)

Draft tube flow phenomena across the bulb turbine hill chart

International Nuclear Information System (INIS)

Duquesne, P; Fraser, R; Maciel, Y; Aeschlimann, V; Deschênes, C

2014-01-01

In the framework of the BulbT project launched by the Consortium on Hydraulic Machines and the LAMH (Hydraulic Machine Laboratory of Laval University) in 2011, an intensive campaign to identify flow phenomena in the draft tube of a model bulb turbine has been done. A special focus was put on the draft tube component since it has a particular importance for recuperation in low head turbines. Particular operating points were chosen to analyse flow phenomena in this component. For each of these operating points, power, efficiency and pressure were measured following the IEC 60193 standard. Visualizations, unsteady wall pressure and efficiency measurements were performed in this component. The unsteady wall pressure was monitored at seven locations in the draft tube. The frequency content of each pressure signal was analyzed in order to characterize the flow phenomena across the efficiency hill chart. Visualizations were recorded with a high speed camera using tufts and cavitation bubbles as markers. The predominant detected phenomena were mapped and categorized in relation to the efficiency hill charts obtained for three runner blade openings. At partial load, the vortex rope was detected and characterized. An inflection in the partial load efficiency curves was found to be related to complex vortex rope instabilities. For overload conditions, the efficiency curves present a sharp drop after the best efficiency point, corresponding to an inflection on the power curves. This break off is more severe towards the highest blade openings. It is correlated to a flow separation at the wall of the draft tube. Also, due to the separation occurring in these conditions, a hysteresis effect was observed on the efficiency curves

Competency Reference for Computer Assisted Drafting.

Science.gov (United States)

Oregon State Dept. of Education, Salem. Div. of Vocational Technical Education.

This guide, developed in Oregon, lists competencies essential for students in computer-assisted drafting (CAD). Competencies are organized in eight categories: computer hardware, file usage and manipulation, basic drafting techniques, mechanical drafting, specialty disciplines, three dimensional drawing/design, plotting/printing, and advanced CAD.…

Experimentally Identify the Effective Plume Chimney over a Natural Draft Chimney Model

Science.gov (United States)

Rahman, M. M.; Chu, C. M.; Tahir, A. M.; Ismail, M. A. bin; Misran, M. S. bin; Ling, L. S.

2017-07-01

The demands of energy are in increasing order due to rapid industrialization and urbanization. The researchers and scientists are working hard to improve the performance of the industry so that the energy consumption can be reduced significantly. Industries like power plant, timber processing plant, oil refinery, etc. performance mainly depend on the cooling tower chimney’s performance, either natural draft or forced draft. Chimney is used to create sufficient draft, so that air can flow through it. Cold inflow or flow reversal at chimney exit is one of the main identified problems that may alter the overall plant performance. The presence Effective Plume Chimney (EPC) is an indication of cold inflow free operation of natural draft chimney. Different mathematical model equations are used to estimate the EPC height over the heat exchanger or hot surface. In this paper, it is aim to identify the EPC experimentally. In order to do that, horizontal temperature profiling is done at the exit of the chimneys of face area 0.56m2, 1.00m2 and 2.25m2. A wire mesh screen is installed at chimneys exit to ensure cold inflow chimney operation. It is found that EPC exists in all modified chimney models and the heights of EPC varied from 1 cm to 9 cm. The mathematical models indicate that the estimated heights of EPC varied from 1 cm to 2.3 cm. Smoke test is also conducted to ensure the existence of EPC and cold inflow free option of chimney. Smoke test results confirmed the presence of EPC and cold inflow free operation of chimney. The performance of the cold inflow free chimney is increased by 50% to 90% than normal chimney.

Replacement Nuclear Research Reactor: Draft Environmental Impact Statement. Vol. 1. Main report

International Nuclear Information System (INIS)

1998-07-01

The Draft Environmental Impact Statement (EIS) for the replacement of the Australian Research reactor has been released. An important objective of the EIS process is to ensure that all relevant information has been collected and assessed so that the Commonwealth Government can make an informed decision on the proposal. The environmental assessment of the proposal to construct and operate a replacement reactor described in the Draft EIS has shown that the scale of environmental impacts that would occur would be acceptable, provided that the management measures and commitments made by ANSTO are adopted. Furthermore, construction and operation of the proposed replacement reactor would result in a range of benefits in health care, the national interest, scientific achievement and industrial capability. It would also result in a range of benefits derived from increased employment and economic activity. None of the alternatives to the replacement research reactor considered in the Draft EIS can meet all of the objectives of the proposal. The risk from normal operations or accidents has been shown to be well within national and internationally accepted risk parameters. The dose due to reactor operations would continue to be small and within regulatory limits. For the replacement reactor, the principle of 'As Low As Reasonably Achievable' would form an integral part of the design and licensing process to ensure that doses to operators are minimized. Costs associated with the proposal are $286 million (in 1997 dollars) for design and construction. The annual operating and maintenance costs are estimated to be $12 million per year, of which a significant proportion will be covered by commercial activities. The costs include management of the spent fuel from the replacement reactor as well as the environmental management costs of waste management, safety and environmental monitoring. Decommissioning costs for the replacement reactor would arise at the end of its lifetime

Testing Methodology of Breaking into Secured Storages of Mobile Operational System Google Android

Directory of Open Access Journals (Sweden)

Elena Vyacheslavovna Elistratova

2013-02-01

Full Text Available The methodology is developed for carrying out the test of breaking into internal storages of mobile operational system Google Android in order to detect security threats for personal data.

Evaluation of Worktext in Mechanical Drafting

Directory of Open Access Journals (Sweden)

Erich D. Cruz

2015-11-01

Full Text Available This study aimed to evaluate Worktext in Drafting Technology 4 (Mechanical Drafting for Bachelor of Technology (BT major in Drafting Technology. It was conducted at University of Rizal System with twenty Drafting and Mechanical Technology professors as respondents. The study used the descriptive evaluative method to describe and evaluate the developed Worktext in DT 4 using the questionnaire-checklist in gathering data. They were asked to evaluate the worktext through the following: objectives, contents, activities, presentation and style, organization, creativity, evaluation, accuracy, completeness and appropriateness. It was found out that the developed worktext with respect to objectives was highly agree, contents was highly agree, activities was highly agree, presentation and style was agree, creativity was highly agree and evaluation was highly agree. Meaning that the items with highly agree interpretations attained excellent level of acceptability while those with agree interpretations obtained extensive level of acceptability with fully achieved and above average Drafting standards, respectively. It was also found out that the developed worktext in terms of accuracy was high, completeness was very high and appropriateness was likewise very high. The researcher recommends that the developed Worktext in Drafting Technology 4 may be adopted for use by the Bachelor of Technology major in Drafting Technology students.

Predicted percentage dissatisfied with ankle draft.

Science.gov (United States)

Liu, S; Schiavon, S; Kabanshi, A; Nazaroff, W W

2017-07-01

Draft is unwanted local convective cooling. The draft risk model of Fanger et al. (Energy and Buildings 12, 21-39, 1988) estimates the percentage of people dissatisfied with air movement due to overcooling at the neck. There is no model for predicting draft at ankles, which is more relevant to stratified air distribution systems such as underfloor air distribution (UFAD) and displacement ventilation (DV). We developed a model for predicted percentage dissatisfied with ankle draft (PPD AD ) based on laboratory experiments with 110 college students. We assessed the effect on ankle draft of various combinations of air speed (nominal range: 0.1-0.6 m/s), temperature (nominal range: 16.5-22.5°C), turbulence intensity (at ankles), sex, and clothing insulation (thermal sensation and air speed at ankles are the dominant parameters affecting draft. The seated subjects accepted a vertical temperature difference of up to 8°C between ankles (0.1 m) and head (1.1 m) at neutral whole-body thermal sensation, 5°C more than the maximum difference recommended in existing standards. The developed ankle draft model can be implemented in thermal comfort and air diffuser testing standards. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Bisociation of artistic and academic methodologies

DEFF Research Database (Denmark)

Heinrich, Falk

This paper elaborates on the integration of academic and artistic methodologies within the field of art and technology. The term art and technology refers to a recognized research field and to higher education programmes, such as the BA program Art and Technology at Aalborg University. Art...... with and design of teaching designs aims at the description of a methodology and a heuristic for drafting concrete teaching designs....... and discovery. Koestler proposes the concept of bisociation for academic discoveries and artistic revealings alike by looking at the results of this creation (work of art, scientific discovery). However, my question is, whether the blending of academic and artistic discourses and methodologies––being a second...

Prometheus Reactor I&C Software Development Methodology, for Action

Energy Technology Data Exchange (ETDEWEB)

T. Hamilton

2005-07-30

The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

A review and evaluation of the Draft EPA standard (40 CFR 191)

International Nuclear Information System (INIS)

Ortiz, N.R.; Chu, M.S.Y.; Siegel, M.D.; Wahi, K.K.

1984-01-01

The Environmental Protection Agency's proposed rule for the management and disposal of high-level waste (Draft Standard, 40 CFR 191), was reviewed and analyzed using the risk assessment methodology developed at Sandia National Laboratories. The methodology was exercised on hypothetical repository systems in basalt, bedded salt, and tuff. Among the issues addressed were achievability, release limits, uncertainty, and compliance. The proposed release limits were also analyzed in terms of their relationship to the health effects. The uncertainty in the input parameters of the deterministic models was taken into account in calculating releases to the accessible environment. Extentions to an existing compliance-assessment methodolog are suggested that would allow one to incorporate the uncertainty associated with the frequency of occurrence of scenarios. The results indicate that, in general, the standards are achievable and the release limits are sufficiently conservative

77 FR 17091 - Trust Land Consolidation Draft Plan

Science.gov (United States)

2012-03-23

... DEPARTMENT OF THE INTERIOR Office of the Secretary Trust Land Consolidation Draft Plan AGENCY... reopening the period for commenting on the Cobell Land Consolidation Program Draft Plan (also known as the Trust Land Consolidation Draft Plan), which is the draft plan for accomplishing these goals. DATES...

Optimization design of solar enhanced natural draft dry cooling tower

International Nuclear Information System (INIS)

Zou, Zheng; Guan, Zhiqiang; Gurgenci, Hal

2013-01-01

Highlights: • We proposed a cost model for solar enhanced natural draft dry cooling tower. • We proposed an optimization scheme for this new cooling system. • We optimally designed one for a 50 MW EGS geothermal plant as a demonstration. • Results proved its economic advantages for EGS geothermal application. - Abstract: This paper proposed an optimization scheme for solar enhanced natural draft dry cooling tower design, in which a detailed cost model was proposed including capital, labour, maintenance and operation costs of each component. Based on the developed cost model, the optimal design option can be identified in terms of the relatively lower annual cost and the relatively higher total extra income over the Solar Enhanced Natural Draft Dry Cooling Tower (SENDDCT) lifetime. As a case study, a SENDDCT was optimally designed to meet the cooling demand for a 50 MW geothermal power plant with Engineered Geothermal System (EGS) technology. The results showed that the optimized SENDDCT not only has better cooling performance during the daytime but also is a cost effective option for EGS geothermal power plants

System for implement draft reduction

DEFF Research Database (Denmark)

2008-01-01

Abstract of WO 2008095503  (A1) There is disclosed a system and method of reducing draft forces when working soil with agricultural soil working implements (206, 211) creating draft forces, the soil working implements (208, 206, 211) beingoperable connectable to a frame (204, 304, 404, 504, 604......, the second part of the width comprising an other part of said width (212) than the first part (222), so as e.g. to reduce draft forces compared to working both first and second parts at the same time....

Comparison of Conventional and Computer-aided Drafting Methods from the View of Time and Drafting Quality

OpenAIRE

OZKAN, Aysen; YILDIRIM, Kemal

2016-01-01

Problem Statement: Drafting course is essential for students in the design disciplines for becoming more organized and for complying with standards in the educational system. Drafting knowledge is crucial, both for comprehension of the issues and for the implementation phase. In any design project, drafting performance and success are as important as the design process, especially in the educational environments aimed at professional life. However, there have been relatively any studies under...

Mississippi Curriculum Framework for General Drafting (Program CIP: 48.0101--Drafting, General). Secondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for two secondary-level courses in drafting: drafting I and II. Presented…

Use of the GO methodology to assess plant operating data

International Nuclear Information System (INIS)

Wenger, L.O.; Danner, M.A.

1987-01-01

In September 1985, the Institute of Nuclear Power Operations (INPO) published The Operational Performance of Auxiliary Feedwater Systems in US PWRs, 1980-1984, in which many of the problems experienced by the nuclear industry with auxiliary feedwater systems (AFWSs) were summarized. The principal conclusions of the INPO report were that pressurized water reactor AFWS equipment failure rates had nearly doubled industry-wide since 1980. Calvert Cliffs Units 1 and 2 were highlighted by INPO as being among some of the poorer performers identified in the report. The study objective involved estimating the historical AFWS unavailability so that it could be compared with a predetermined acceptable availability goal. From this comparison, the relative importance of individual contributions to overall system unavailability resulting from various equipment failure modes could be assessed. The GO methodology, a computerized reliability analyses technique, was selected as the means for performing additional analyses. A GO system model was developed to represent the current Calvert Cliffs AFWS configuration. In summary, it was shown that integration of plant data with a comprehensive availability/reliability model can provide both the necessary insights to focus attention on the most important contributions to system unavailability and a pragmatic way for developing a cost effective implementation strategy. The GO methodology was useful and provided the requisite results with a minimal outlay of valuable resources

77 FR 5415 - National Organic Program: Notice of Draft Guidance for Accredited Certifying Agents, Certified...

Science.gov (United States)

2012-02-03

... in order to be excluded from the organic certification requirements of Part 205. The NOSB recommended... handling operations that are or are not excluded from organic certification. The draft guidance proposes... excluded from certification and, therefore, must be certified organic operations. \\1\\ NOSB Recommendation...

76 FR 80385 - Draft Environmental Impact Statement and Proposed Maricopa Sun Solar Complex Multi-Species...

Science.gov (United States)

2011-12-23

.... Operation related activities could include solar panel maintenance, on-site parking, operation of solar...-FXES11120800000F2-123] Draft Environmental Impact Statement and Proposed Maricopa Sun Solar Complex Multi-Species... National Environmental Policy Act for the proposed Maricopa Sun Solar Complex Habitat Conservation Plan...

Prometheus Reactor I and C Software Development Methodology, for Action

International Nuclear Information System (INIS)

T. Hamilton

2005-01-01

The purpose of this letter is to submit the Reactor Instrumentation and Control (I and C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I and C Software Development Process Manual and Reactor Module Software Development Plan to NR for information

Business plan in brief. Draft

International Nuclear Information System (INIS)

1994-06-01

Competition is revolutionizing the electricity industry, and utilities may never be the same. In the past two decades, government deregulation has transformed the airline, cable television, natural gas, and telecommunications industries. Now, with the passage of new laws which have spurred the growth of independent power and opened up transmission access, the electric utility industry has become the laboratory for change. Here in the Northwest, dramatic changes in the electric industry mean that the Bonneville Power Administration (BPA) is facing real competition. Our customers have more choices than they had in the past. BPA's draft Business Plan is a direct response to this changing environment. The plan presents how we propose to adapt to the new competitive marketplace. This is a summary of the plan and some of the important issues it raises for regional discussion. The draft plan contains much more detail on all the topics mentioned here. Business Plan is BPA's first attempt to integrate the long-term strategic plans of the various parts of the agency with a strategic financial plan. Change is evident throughout the plan--change in our operating environment, in our strategic direction, in our customer and constituent relationships, and in BPA itself as an organization

Replacement Nuclear Research Reactor: Draft Environmental Impact Statement. Vol. 1. Main report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

The Draft Environmental Impact Statement (EIS) for the replacement of the Australian Research reactor has been released. An important objective of the EIS process is to ensure that all relevant information has been collected and assessed so that the Commonwealth Government can make an informed decision on the proposal. The environmental assessment of the proposal to construct and operate a replacement reactor described in the Draft EIS has shown that the scale of environmental impacts that would occur would be acceptable, provided that the management measures and commitments made by ANSTO are adopted. Furthermore, construction and operation of the proposed replacement reactor would result in a range of benefits in health care, the national interest, scientific achievement and industrial capability. It would also result in a range of benefits derived from increased employment and economic activity. None of the alternatives to the replacement research reactor considered in the Draft EIS can meet all of the objectives of the proposal. The risk from normal operations or accidents has been shown to be well within national and internationally accepted risk parameters. The dose due to reactor operations would continue to be small and within regulatory limits. For the replacement reactor, the principle of `As Low As Reasonably Achievable` would form an integral part of the design and licensing process to ensure that doses to operators are minimized. Costs associated with the proposal are $286 million (in 1997 dollars) for design and construction. The annual operating and maintenance costs are estimated to be $12 million per year, of which a significant proportion will be covered by commercial activities. The costs include management of the spent fuel from the replacement reactor as well as the environmental management costs of waste management, safety and environmental monitoring. Decommissioning costs for the replacement reactor would arise at the end of its lifetime

Forced draft wet cooling systems

International Nuclear Information System (INIS)

Daubert, A.; Caudron, L.; Viollet, P.L.

1975-01-01

The disposal of the heat released from a 1000MW power plant needs a natural draft tower of about 130m of diameter at the base, and 170m height, or a cooling system with a draft forced by about forty vans, a hundred meters in diameter, and thirty meters height. The plumes from atmospheric cooling systems form, in terms of fluid mechanics, hot jets in a cross current. They consist in complex flows that must be finely investigated with experimental and computer means. The study, currently being performed at the National Hydraulics Laboratory, shows that as far as the length and height of visible plumes are concerned, the comparison is favorable to some types of forced draft cooling system, for low and medium velocities, (below 5 or 6m/s at 10m height. Beyond these velocities, the forced draft sends the plume up to smaller heights, but the plume is generally more dilute [fr

76 FR 381 - Notice of Availability of the Draft Environmental Impact Statement/Draft Environmental Impact...

Science.gov (United States)

2011-01-04

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Draft Environmental Impact Statement (EIS), and Draft Environmental Impact Report (EIR) as a joint environmental analysis document for the Iberdrola Renewable/Pacific Wind Development Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the opening of the comment period on the Draft EIS/EIR.

Draft revision of human factors guideline HF-010

International Nuclear Information System (INIS)

Lee, Hyun Chul; Lee, Yong Hee; Oh, In Seok; Lee, Jung Woon; Cha, Woo Chang; Lee, Dhong Ha

2003-05-01

The Application of Human Factors to the design of Man-Machine Interfaces System(MMIS) in the nuclear power plant is essential to the safety and productivity of the nuclear power plants, human factors standards and guidelines as well as human factors analysis methods and experiments are weightily used to the design application. A Korean engineering company has developed a human factors engineering guideline, so-call HF-010, and has used it for human factors design, however the revision of HF-010 is necessary owing to lack of the contents related to the advanced MMI(Man-Machine Interfaces). As the results of the reviews of HF-010, it is found out that the revision of Section 9. Computer Displays of HF-010 is urgent, thus the revision was drafted on the basis of integrated human factors design guidelines for VDT, human factors design guidelines for PMAS SPADES display, human factors design guidelines for PMAS alarm display, and human factors design guidelines for electronic displays developed by the surveillance and operation support project of KOICS. The draft revision of HF-010 Section 9 proposed in this report can be utilized for the human factors design of the advanced MMI, and the high practical usability of the draft can be kept up through the continuous revision according to the advancement of digital technology

Industrial Arts Curriculum Guide in Basic Technical Drafting. Bulletin No. 1686.

Science.gov (United States)

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains operational guidelines to help local administrators, teacher educators, and industrial arts teachers in the State of Louisiana determine the extent to which their technical drafting courses are meeting the needs of the youth they serve. It consists of a discussion of course prerequisites, goals, content, and…

Industry offers objections to France's draft petroleum law

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that France's petroleum industry is protesting parts of a government draft oil law expected to go into effect in January. The law is to be submitted to Parliament this fall and will replace a law that has governed Franc's oil industry operations for most of the century. And while the new law loosens and in some cases scraps controls, officials see costs that will affect the petroleum industry's competitiveness in Europe

IRIS Toxicological Review of Ammonia (Revised External Review Draft)

Science.gov (United States)

In August 2013, EPA submitted a revised draft IRIS assessment of ammonia to the agency's Science Advisory Board (SAB) and posted this draft on the IRIS website. EPA had previously released a draft of the assessment for public comment, held a public meeting about the draft, and ...

Proper Orthogonal Decomposition of Pressure Fields in a Draft Tube Cone of the Francis (Tokke) Turbine Model

International Nuclear Information System (INIS)

Stefan, D; Rudolf, P

2015-01-01

The simulations of high head Francis turbine model (Tokke) are performed for three operating conditions - Part Load, Best Efficiency Point (BEP) and Full Load using software Ansys Fluent R15 and alternatively OpenFOAM 2.2.2. For both solvers the simulations employ Realizable k-e turbulence model. The unsteady pressure pulsations of pressure signal from two monitoring points situated in the draft tube cone and one behind the guide vanes are evaluated for all three operating conditions in order to compare frequencies and amplitudes with the experimental results. The computed velocity fields are compared with the experimental ones using LDA measurements in two locations situated in the draft tube cone. The proper orthogonal decomposition (POD) is applied on a longitudinal slice through the draft tube cone. The unsteady static pressure fields are decomposed and a spatio-temporal behavior of modes is correlated with amplitude-frequency results obtained from the pressure signal in monitoring points. The main application of POD is to describe which modes are related to an interaction between rotor (turbine runner) and stator (spiral casing and guide vanes) and cause dynamic flow behavior in the draft tube. The numerically computed efficiency is correlated with the experimental one in order to verify the simulation accuracy

Computer Network Operations Methodology

Science.gov (United States)

2004-03-01

means of their computer information systems. Disrupt - This type of attack focuses on disrupting as “attackers might surreptitiously reprogram enemy...by reprogramming the computers that control distribution within the power grid. A disruption attack introduces disorder and inhibits the effective...between commanders. The use of methodologies is widespread and done subconsciously to assist individuals in decision making. The processes that

78 FR 19733 - Draft General Management Plan and Draft Environmental Impact Statement, Fort Raleigh National...

Science.gov (United States)

2013-04-02

... announce the dates, times, and locations of public meetings on the draft EIS/GMP through the NPS Planning... delivery to the above address. Electronic copies of the Draft EIS/GMP will be available online at http... through additional interpretive efforts, marketing, and facilities. Alternative C, the NPS preferred...

Knowledge-based operation guidance system for nuclear power plants based on generic task methodology

International Nuclear Information System (INIS)

Yamada, Naoyuki; Chandrasekaran, B.; Bhatnager, R.

1989-01-01

A knowledge-based system for operation guidance of nuclear power plants is proposed. The Dynamic Procedure Management System (DPMS) is designed and developed to assist human operators interactively by selecting and modifying predefined operation procedures in a dynamic situation. Unlike most operation guidance systems, DPMS has been built based on Generic Task Methodology, which makes the overall framework of the system perspicuous and also lets domain knowledge be represented in a natural way. This paper describes the organization of the system, the definition of each task, and the form and organization of knowledge, followed by an application example. (author)

Draft environmental statement related to the operation of Braidwood Station, Units 1 and 2 (Docket Nos. STN 50-456 and STN 50-457)

International Nuclear Information System (INIS)

1983-12-01

The Draft Environment Statement contains the second assessment of the environmental impact associated with the operation of Braidwood Station, Units 1 and 2, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs. Land use and terrestrial and aquatic ecological impacts will be small. Operational impacts to historic and archeologic sites will be negligible. The effects of routine operations, energy transmission, and periodic maintenance of rights of way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity. The risk of radiation exposure associated with accidental release of radioactivity is very low. The net socioeconomi effects of the project will be beneficial. On the basis of the analysis and evaluation set forth in this environmental statement, it is concluded that the action called for under NEPA and 10 CFR 51 is the issuance of operating licenses for Braidwood Station, Units 1 and 2

Interrelationships Between Receiver/Relative Operating Characteristics Display, Binomial, Logit, and Bayes' Rule Probability of Detection Methodologies

Science.gov (United States)

Generazio, Edward R.

2014-01-01

Unknown risks are introduced into failure critical systems when probability of detection (POD) capabilities are accepted without a complete understanding of the statistical method applied and the interpretation of the statistical results. The presence of this risk in the nondestructive evaluation (NDE) community is revealed in common statements about POD. These statements are often interpreted in a variety of ways and therefore, the very existence of the statements identifies the need for a more comprehensive understanding of POD methodologies. Statistical methodologies have data requirements to be met, procedures to be followed, and requirements for validation or demonstration of adequacy of the POD estimates. Risks are further enhanced due to the wide range of statistical methodologies used for determining the POD capability. Receiver/Relative Operating Characteristics (ROC) Display, simple binomial, logistic regression, and Bayes' rule POD methodologies are widely used in determining POD capability. This work focuses on Hit-Miss data to reveal the framework of the interrelationships between Receiver/Relative Operating Characteristics Display, simple binomial, logistic regression, and Bayes' Rule methodologies as they are applied to POD. Knowledge of these interrelationships leads to an intuitive and global understanding of the statistical data, procedural and validation requirements for establishing credible POD estimates.

Draft environmental statement related to the operation of Shearon Harris Nuclear Power Plant, Units 1 and 2. Docket Nos. STN 50-400 and STN 50-401

International Nuclear Information System (INIS)

1983-04-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with the operation of the Shearon Harris Nuclear Power Plant, Units 1 and 2, pursuant to the National Environmental Policy Act of 1979 (NEPA) and 10 CFR 51, as amended, of the NRC regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs. Land use and terrestrial and aquatic-ecological impacts will be small. Operational impacts to historic and archeological sites will be negligible. The effects of routine operations, energy transmission, and periodic maintenance of rights-of-way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity. The risk of radiation exposure associated with accidental release of radioactivity is very low. The net socio-economic effects of the project will be beneficial. The action called for is the issuance of an operating license for Shearon Harris PLant, Units 1 and 2

Application of ASSET methodology and operational experience feedback of NPPs in China

Energy Technology Data Exchange (ETDEWEB)

Lan, Ziyong [The National Nuclear Safety Administration, Beijing (China)

1997-10-01

The introductive presentation of ASSET methodology to China started in March 1992, 3 experts from the IAEA held the ASSET Seminar in Wuhan, China. Three years later, an IAEA seminar on ASSET Method and Operational Experience Feedback proceeded in Beijing on 20-24 March 1995. Another ASSET seminar on Self-Assessment and Operational Experience Feedback was held at Guangdong NPP site on 2-6 December 1996, The NNSA and the GNPP hosted the seminar, 2 IAEA experts, 55 participants from the NPPs, research institutes, the regulatory body (NNSA) and its regional offices attended the seminar. 3 figs, 5 tabs.

Application of ASSET methodology and operational experience feedback of NPPs in China

International Nuclear Information System (INIS)

Ziyong Lan

1997-01-01

The introductive presentation of ASSET methodology to China started in March 1992, 3 experts from the IAEA held the ASSET Seminar in Wuhan, China. Three years later, an IAEA seminar on ASSET Method and Operational Experience Feedback proceeded in Beijing on 20-24 March 1995. Another ASSET seminar on Self-Assessment and Operational Experience Feedback was held at Guangdong NPP site on 2-6 December 1996, The NNSA and the GNPP hosted the seminar, 2 IAEA experts, 55 participants from the NPPs, research institutes, the regulatory body (NNSA) and its regional offices attended the seminar. 3 figs, 5 tabs

Optimal Draft requirement for vibratory tillage equipment using Genetic Algorithm Technique

Science.gov (United States)

Rao, Gowripathi; Chaudhary, Himanshu; Singh, Prem

2018-03-01

Agriculture is an important sector of Indian economy. Primary and secondary tillage operations are required for any land preparation process. Conventionally different tractor-drawn implements such as mouldboard plough, disc plough, subsoiler, cultivator and disc harrow, etc. are used for primary and secondary manipulations of soils. Among them, oscillatory tillage equipment is one such type which uses vibratory motion for tillage purpose. Several investigators have reported that the requirement for draft consumption in primary tillage implements is more as compared to oscillating one because they are always in contact with soil. Therefore in this paper, an attempt is made to find out the optimal parameters from the experimental data available in the literature to obtain minimum draft consumption through genetic algorithm technique.

Integrated vehicle-based safety systems light-vehicle field operational test, methodology and results report.

Science.gov (United States)

2010-12-01

"This document presents the methodology and results from the light-vehicle field operational test conducted as part of the Integrated Vehicle-Based Safety Systems program. These findings are the result of analyses performed by the University of Michi...

Methodology for Risk Analysis of Dam Gates and Associated Operating Equipment Using Fault Tree Analysis

National Research Council Canada - National Science Library

Patev, Robert C; Putcha, Chandra; Foltz, Stuart D

2005-01-01

.... This report summarizes research on methodologies to assist in quantifying risks related to dam gates and associated operating equipment, and how those risks relate to overall spillway failure risk...

Scoping paper on new CDM baseline methodology for cross-border power trade

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Poeyry has been sub-contracted by Carbon Limits, under the African Development Bank CDM Support Programme, to prepare a new CDM baseline methodology for cross border trade, based on a transmission line from Ethiopia to Kenya. The first step in that process is to review the response of the UNFCCC, particularly the Methodologies Panel ('Meth Panel') of the CDM Executive Board, to the various proposals on cross-border trade and interconnection of grids. This report reviews the Methodology Panel and Executive Board decisions on 4 requests for revisions of ACM2 'Consolidated baseline methodology for grid-connected electricity generation from renewable sources', and 5 proposed new baseline methodologies (NM255, NM269, NM272, NM318, NM342), all of which were rejected. We analyse the reasons the methodologies were rejected, and whether the proposed draft Approved Methodology (AM) that the Methodology Panel created in response to NM269 and NM272 is a suitable basis for a new methodology proposal.(auth)

77 FR 74508 - Notice of Availability of the Draft Resource Management Plan Amendment, Draft Environmental...

Science.gov (United States)

2012-12-14

... eliminated. A maximum of 7,500 summer and winter landings would be permitted in the project area annually... considered, the BLM must receive written comments on the Draft RMP Amendment/Draft EIS within 90 days... meetings or hearings and any other public involvement activities at least 15 days in advance through public...

EMD-Based Methodology for the Identification of a High-Speed Train Running in a Gear Operating State.

Science.gov (United States)

Bustos, Alejandro; Rubio, Higinio; Castejón, Cristina; García-Prada, Juan Carlos

2018-03-06

An efficient maintenance is a key consideration in systems of railway transport, especially in high-speed trains, in order to avoid accidents with catastrophic consequences. In this sense, having a method that allows for the early detection of defects in critical elements, such as the bogie mechanical components, is a crucial for increasing the availability of rolling stock and reducing maintenance costs. The main contribution of this work is the proposal of a methodology that, based on classical signal processing techniques, provides a set of parameters for the fast identification of the operating state of a critical mechanical system. With this methodology, the vibratory behaviour of a very complex mechanical system is characterised, through variable inputs, which will allow for the detection of possible changes in the mechanical elements. This methodology is applied to a real high-speed train in commercial service, with the aim of studying the vibratory behaviour of the train (specifically, the bogie) before and after a maintenance operation. The results obtained with this methodology demonstrated the usefulness of the new procedure and allowed for the disclosure of reductions between 15% and 45% in the spectral power of selected Intrinsic Mode Functions (IMFs) after the maintenance operation.

76 FR 57760 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Science.gov (United States)

2011-09-16

... approximately 707,000 subsurface acres of Federal mineral estate. Decisions in the Colorado River Valley RMP... Availability of Draft Resource Management Plan and Draft Environmental Impact Statement for the Colorado River Valley Field Office, Colorado AGENCY: Bureau of Land Management, Interior. ACTION: Notice of availability...

Methodological Proposal for Optimal Location of Emergency Operation Centers through Multi-Criteria Approach

Directory of Open Access Journals (Sweden)

Umberto Di Matteo

2016-01-01

Full Text Available Territorial vulnerability and risk analysis play a fundamental role in urban planning and emergency management. Requirements analysis of such aspects are possible to define more and more effective risk mitigation strategies providing efficient response plans to events. Many mitigation strategies as well as many response plans have in common the purpose of minimizing response time in order to decrease the level of vulnerability of the concerning area. The response time to a perturbing event is in fact an essential parameter to define the hazard of the considered site and literature is unanimous in considering it. In this context, the article proposes a methodology for the optimization of the location on the territory of emergency operation centers (EOCs, reducing response times and mitigating in this way the vulnerability of the area. The proposed methodology is based on a multi-criteria decision making (MCDM hybrid type AHP (Analytic Hierarchy Process-Electre. This method has been applied in the territory of Bressanone and Vipiteno (Bolzano-Italy, simulating the need to build a new barrack of Fire Department. A campaign of interviews with operators and industry experts and the collection of spatial data from the portals of the concerned authorities has been carried out in order to get the number of necessary data for the implementation of the proposed methodology.

77 FR 5528 - Trust Land Consolidation Draft Plan

Science.gov (United States)

2012-02-03

... DEPARTMENT OF THE INTERIOR Office of the Secretary Trust Land Consolidation Draft Plan AGENCY... draft plan for accomplishing these goals. DATES: Submit comments by March 19, 2012. ADDRESSES: Send comments on the draft plan to: Elizabeth Appel, Bureau of Indian Affairs, 1001 Indian School Road NW...

Monitoring CO{sub 2} emissions along the logistics chain. Carbon footprinting; Monitoring fuer den CO{sub 2}-Ausstoss in der Logistikkette. Carbon Footprint - Teilgutachten

Energy Technology Data Exchange (ETDEWEB)

Schmied, Martin [Oeko-Institut e.V., Berlin (Germany); Knoerr, Wolfgang [ifeu - Institut fuer Energie- und Umweltforschung Heidelberg GmbH, Heidelberg (Germany)

2012-07-15

The aim of the project was to develop a standardized methodology to calculate GHG emissions along the logistics chain and to incorporate this methodology in the development of the european CEN standard prEN 16258. Meanwhile a draft standard - entitled ''Methodology for calculation and declaration on energy consumptions and GHG emissions in transport services'' is existing. To simplify the usage of the draft standard prEN 16258 for freight forwarders and logistics operators, guidelines/ a manual was developed in addition, which are published and distributed by the Association of German Freight Forwarders and Logistics Operators (Deutscher Speditions- und Logistikverband - DSLV).

Technical-and-Economic Efficiency of Draft Enriched with Oxygen in Small-Capacity Heating Boilers

Directory of Open Access Journals (Sweden)

P. Ratnikov

2013-01-01

Full Text Available Data on complex experimental and theoretical investigations pertaining to efficiency of oxygen-enriched draft in the small-capacity heating boilers as exemplified by the plant HEIZA (HW-S-10/K have been presented in the paper. The paper provides a calculation model of heating processes in heat generator burner (as exemplified by HEIZA plant. Simulation of heating processes in the operational zone has been executed in paper. The experimental data have proved model adequacy. The calculation scheme of the plant will be used in future for determination of power and ecological efficiency of draft enrichment with oxygen.

78 FR 20690 - Draft Environmental Impact Statement, Draft Habitat Conservation Plan, Draft Programmatic...

Science.gov (United States)

2013-04-05

.... Background The Fowler Ridge application is unusual in that 355 wind turbines are already in place and have... Agreement, and Draft Implementing Agreement; Application for an Incidental Take Permit, Fowler Ridge Wind... application from Fowler Ridge Wind Farm LLC, Fowler Ridge II Wind Farm LLC, Fowler Ridge III Wind Farm LLC...

76 FR 59155 - Notice of Availability of South Coast Draft Resource Management Plan Revision and Draft...

Science.gov (United States)

2011-09-23

... policies and emphasis on the management of public lands and local land use planning; and new data that have... DEPARTMENT OF THE INTERIOR Bureau of Land Management [LLCAD06000, L16100000.DP0000] Notice of Availability of South Coast Draft Resource Management Plan Revision and Draft Environmental Impact Statement...

Cluster: Drafting. Course: Introduction to Technical Drafting.

Science.gov (United States)

Sanford - Lee County Schools, NC.

The set of 10 units is designed for use with an instructor as an introduction to technical drafting, and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: drafting…

19 CFR 207.63 - Circulation of draft questionnaires.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Circulation of draft questionnaires. 207.63... SUBSIDIZED EXPORTS TO THE UNITED STATES Five-Year Reviews § 207.63 Circulation of draft questionnaires. (a) The Director shall circulate draft questionnaires to the parties for comment in each full review. (b...

Development of performance assessment methodology for establishment of quantitative acceptance criteria of near-surface radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Kim, C. R.; Lee, E. Y.; Park, J. W.; Chang, G. M.; Park, H. Y.; Yeom, Y. S. [Korea Hydro and Nuclear Power Co., Ltd., Seoul (Korea, Republic of)

2002-03-15

The contents and the scope of this study are as follows : review of state-of-the-art on the establishment of waste acceptance criteria in foreign near-surface radioactive waste disposal facilities, investigation of radiological assessment methodologies and scenarios, investigation of existing models and computer codes used in performance/safety assessment, development of a performance assessment methodology(draft) to derive quantitatively radionuclide acceptance criteria of domestic near-surface disposal facility, preliminary performance/safety assessment in accordance with the developed methodology.

10 CFR 51.81 - Distribution of draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

The Physics of Bump Drafting in Car Racing

Science.gov (United States)

Fiolhais, Miguel C. N.; Amor dos Santos, Susana

2014-01-01

The technique of bump drafting, also known as two-car drafting in motorsports, is analysed in the framework of Newtonian mechanics and simple aerodynamic drag forces. As an apparent unnatural effect that often pleases the enthusiasts of car racing, bump drafting provides a unique pedagogical opportunity for students to gain insights into the…

10 CFR 51.80 - Draft environmental impact statement-materials license.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

Improvement of hydro-turbine draft tube efficiency using vortex generator

Directory of Open Access Journals (Sweden)

Xiaoqing Tian

2015-07-01

Full Text Available Computational fluid dynamics simulation was employed in a hydraulic turbine (from inlet tube to draft tube. The calculated turbine efficiencies were compared with measured results, and the relative error is 1.12%. In order to improve the efficiency of the hydraulic turbine, 15 kinds of vortex generators were installed at the vortex development section of the draft tube, and all of them were simulated using the same method. Based on the turbine efficiencies, distribution of streamlines, velocities, and pressures in the draft tube, an optimal draft tube was found, which can increase the efficiency of this hydraulic turbine more than 1.5%. The efficiency of turbine with the optimal draft tube, draft tube with four pairs of middle-sized vortex generator, and draft tube without vortex generator under different heads of turbine (5–14 m was calculated, and it was verified that these two kinds of draft tubes can increase the efficiency of this turbine in every situation.

Orientation, Sketching, Mechanical Drawing, Drafting--Basic: 9253.01.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

The course introduces the student to the drafting trade, freehand sketching, and basic mechanical drawing. The course has no prerequisites and will guide the student into drafting concepts and serve as a foundation for further study in vocational drafting. Requiring a total of 45 class hours, eight hours are utilized in orientation, 15 hours are…

Optimum Drafting Conditions Of Polyester And Viscose Blend Yarns

Directory of Open Access Journals (Sweden)

Hatamvand Mohammad

2017-09-01

Full Text Available In this study, we used an experimental design to investigate the influence of the total draft, break draft, distance between the aprons (Clips and production roller pressure on yarn quality in order to obtain optimum drafting conditions for polyester and viscose (PES/CV blend yarns in ring spinning frame. We used PES fibers (1.4 dtex × 38 mm long and CV fibers (1.6 dtex × 38 mm long to spin a 20 Tex blend yarn of PES (70%/CV (30% blend ratio. When the break draft, adjustment of distance between of aprons and roller pressure is not reasonable, controlling and leading of the fibers is not sufficient for proper orientation of the fibers in the yarn structure to produce a high quality yarn. Experimental results and statistical analysis show that the best yarn quality will be obtained under drafting conditions total draft of 38, 1.2 break draft, 2.8 mm distance between of aprons and maximum pressure of the production top roller (18daN.

Draft report: a selection methodology for LWR safety R and D programs and proposals

International Nuclear Information System (INIS)

Husseiny, A.A.; Ritzman, R.L.

1980-03-01

The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application

Draft report: a selection methodology for LWR safety R and D programs and proposals

Energy Technology Data Exchange (ETDEWEB)

Husseiny, A. A.; Ritzman, R. L.

1980-03-01

The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application.

The effects of overtime work and task complexity on the performance of nuclear plant operators: A proposed methodology

International Nuclear Information System (INIS)

Banks, W.W.; Potash, L.

1985-01-01

This document presents a very general methodology for determining the effect of overtime work and task complexity on operator performance in response to simulated out-of-limit nuclear plant conditions. The independent variables consist of three levels of overtime work and three levels of task complexity. Multiple dependent performance measures are proposed for use and discussion. Overtime work is operationally defined in terms of the number of hours worked by nuclear plant operators beyond the traditional 8 hours per shift. Task complexity is operationalized in terms of the number of operator tasks required to remedy a given plant anomalous condition and bring the plant back to a ''within limits'' or ''normal'' steady-state condition. The proposed methodology would employ a 2 factor repeated measures design along with the analysis of variance (linear) model

10 CFR 51.85 - Draft environmental impact statement-rulemaking.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-rulemaking. 51.85... Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.85 Draft environmental impact... Commission has determined to prepare an environmental impact statement. ...

Formulation and development of a methodology for selecting desulfurization processes, applicable to diluted sulfurous emissions from copper. Preparation of the engineering for a draft project using electron beam process, selected with this methodology

International Nuclear Information System (INIS)

Aros M, Patricia.

1997-01-01

A comparative study of clean desulfurization technologies was prepared. Sulfur abatement processes from S O 2 gas streams were analyzed in 21 processes grouped into 8 different types. Since there are a large number of potentially applicable processes, this thesis presents a process selection methodology based on a technical/economic analysis series, which produces a ranking by scores. Visual Basic 3.0 software was used to develop the program, which can be installed in any computer and uses Windows 95. Based on these results in Chilean Nuclear Energy Commission decided to present a draft project for electron beam technology. The full design and calculation for the humidifying and cooling tower was prepared together with the design of the remaining equipment for size, in order to estimate probable costs. The pre-feasibility evaluation determined that the process would generate profits, when the selling price of ammonium sulfate - which is a byproduct of the process that is used as fertilizer - is above US$ 110/ton. The process cost is heavily influenced by the capital cost of storage facilities, since a long term supply for ammonia reagent is needed. This product is imported in Chile and it is currently an expensive reagent. (author). 33 app., 7 tabs

Experimental investigation of pressure fluctuations caused by a vortex rope in a draft tube

International Nuclear Information System (INIS)

Kirschner, O; Ruprecht, A; Göde, E; Riedelbauch, S

2012-01-01

In the last years hydro power plants have taken the task of power-frequency control for the electrical grid. Therefore turbines in storage hydro power plants often operate outside their optimum. If Francis-turbines and pump-turbines operate at off-design conditions, a vortex rope in the draft tube can develop. The vortex rope can cause pressure oscillations. In addition to low frequencies caused by the rotation of the vortex rope and the harmonics of these frequencies, pressure fluctuations with higher frequencies can be observed in some operating points too. In this experimental investigation the flow structure and behavior of the vortex rope movement in the draft tube of a model pump-turbine are analyzed. The investigation focuses on the correlation of the pressure fluctuation frequency measured at the draft tube wall with the movement of the vortex rope. The movement of the vortex rope is analyzed by the velocity field in the draft tube which was measured with particle image velocimetry. Additionally, the vortex rope movement has been analyzed with the captures of high-speed-movies from the cavitating vortex rope. Besides the rotation of the vortex rope due to pressure fluctuation with low frequencies the results of the measurement also show a correlation between the rotation of the elliptical or deformed rope cross-section and the higher frequency pressure pulsation. An approximation shows that the frequencies of the pressure fluctuation and the movement of the vortex rope are also connected with the velocity of the flow. Taking into account the size and position of the cavitating vortex core as well as the velocity at the position of the surface of the cavitating vortex core the time-period of the rotation of the vortex core can be approximated. The results show that both, the low frequency pressure fluctuation and the higher frequency pressure fluctuation are correlating with the vortex rope movement. With this estimation, the period of the higher frequency

Assessing risk of draft survey by AHP method

Science.gov (United States)

Xu, Guangcheng; Zhao, Kuimin; Zuo, Zhaoying; Liu, Gang; Jian, Binguo; Lin, Yan; Fan, Yukun; Wang, Fei

2018-04-01

The paper assesses the risks of vessel floating in the seawater for draft survey by using the analytic hierarchy process. On this basis, the paper established draft survey risk index from the view of draft reading, ballast water, fresh water, and calculation process and so on. Then the paper proposes the method to deal with risk assessment using one concrete sample.

Draft environmental statement related to the operation of South Texas Project, Units 1 and 2 (Docket Nos. 50-498 and 50-499). Houston Lighting and Power Company

International Nuclear Information System (INIS)

1986-03-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with the operation of the South Texas Project, Units 1 and 2, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the ''Code of Federal Regulations,'' Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environmental impacts, environmental consequences and mitigating actions, and environmental and economic benefits and costs associated with station operation. Land use and terrestrial and aquatic ecological impacts will be small. No operational impacts to historic and archaeological sites are anticipated. The effects of routine operations, energy transmission, and periodic maintenance of rights-of-way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity. The risk of radiation exposure associated with accidental release of radioactivity is very low. Socioeconomic impacts of the project are anticipated to be minimal. The action called for is the issuance of an operating license for South Texas Project, Units 1 and 2

On the Drafting of Confidentiality Agreements

DEFF Research Database (Denmark)

Drewsen, Merete; Lando, Henrik; Cummins, Tim

2006-01-01

This is not a theoretical paper but an application of existing law and economic contract theory to the issue of how to draft a specific kind of contract. It is addressed to practitioners and is intended for practical use. It will be part of a Wiki (as in Wikipedia) for contract drafting, which...

78 FR 17713 - Notice of Availability of the Draft Environmental Impact Statement for the Proposed Pan Mine...

Science.gov (United States)

2013-03-22

... INFORMATION: Midway Gold US, Inc., (Midway) proposes to construct and operate an open-pit gold mining operation in the northern part of the Pancake Mountain Range, approximately 50 miles west of Ely in White... (May 2004) and the Midway Gold Pan Project Exploration Amendment EA (July 2011). The Draft EIS...

10 CFR 51.70 - Draft environmental impact statement-general.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-general. 51.70... Implementing Section 102(2) Environmental Impact Statements § 51.70 Draft environmental impact statement—general. (a) The NRC staff will prepare a draft environmental impact statement as soon as practicable...

10 CFR 51.71 - Draft environmental impact statement-contents.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-contents. 51.71... Implementing Section 102(2) Environmental Impact Statements § 51.71 Draft environmental impact statement—contents. (a) Scope. The draft environmental impact statement will be prepared in accordance with the scope...

Accuracy of professional sports drafts in predicting career potential.

Science.gov (United States)

Koz, D; Fraser-Thomas, J; Baker, J

2012-08-01

The forecasting of talented players is a crucial aspect of building a successful sports franchise and professional sports invest significant resources in making player choices in sport drafts. The current study examined the relationship between career performance (i.e. games played) and draft round for the National Football League, National Hockey League, National Basketball League, and Major League Baseball for players drafted from 1980 to 1989 (n = 4874) against the assumption of a linear relationship between performance and draft round (i.e. that players with the most potential will be selected before players of lower potential). A two-step analysis revealed significant differences in games played across draft rounds (step 1) and a significant negative relationship between draft round and games played (step 2); however, the amount of variance accounted for was relatively low (less than 17%). Results highlight the challenges of accurately evaluating amateur talent. © 2011 John Wiley & Sons A/S.

Work Domain Analysis Methodology for Development of Operational Concepts for Advanced Reactors

Energy Technology Data Exchange (ETDEWEB)

Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

This report describes a methodology to conduct a Work Domain Analysis in preparation for the development of operational concepts for new plants. This method has been adapted from the classical method described in the literature in order to better deal with the uncertainty and incomplete information typical of first-of-a-kind designs. The report outlines the strategy for undertaking a Work Domain Analysis of a new nuclear power plant and the methods to be used in the development of the various phases of the analysis. Basic principles are described to the extent necessary to explain why and how the classical method was adapted to make it suitable as a tool for the preparation of operational concepts for a new nuclear power plant. Practical examples are provided of the systematic application of the method and the various presentation formats in the operational analysis of advanced reactors.

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

Science.gov (United States)

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

IMPLICATIONS OF THE CURRENT EXPOSURE DRAFT ON AUDIT REPORTING

Directory of Open Access Journals (Sweden)

George Silviu CORDOȘ

2015-04-01

Full Text Available The regulatory changes come as a response to perceived deficiencies in the postfinancial crisis, and their goal is to improve users' perception of the usefulness and quality of the audit report. The article approaches the subject of these proposals to revise the standards and their implications for the audit report. The article is divided into five parts: the first part the authors present a brief introduction to the subject matter; the second part presents the research methodology; the third part the authors present a review of the literature research; the fourth section presents an analysis of the responses of EU respondents to the Exposure Draft issued by the IAASB in July 2013 and the last part the authors present research findings, limitations and perspectives.

Methodology for identifying credible disruptions to isolation of nuclear waste within Columbia River basalts

International Nuclear Information System (INIS)

Davis, J.D.

1982-01-01

Analysis of potential preclosure and postclosure disruptive events and processes is comprised of evaluation of (1) potential uncertainties and omissions associated with characterization of the site; (2) credible events and processes resulting from the dynamics of natural systems; (3) potential, credible changes in isolation conditions induced by the presence of the repository, and (4) potential, credible future changes impacting isolation capability resulting from man's activities, independent of repository construction/operation. This report presents the overall methodology for identification, classification and analysis of disruptive events based on Nuclear Regulatory Commission and Environmental Protection Agency guidelines proposed in drafts of 10 CFR 60 and 40 CFR 191. Potential credible disruptive events, processes, and conditions are considered with respect to whether they are anticipated or unanticipated, and determined to have reasonably foreseeable, very unlikely, or extremely unlikely probability of occurrence. 85 refs., 2 figs., 7 tabs

77 FR 1501 - Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set...

Science.gov (United States)

2012-01-10

...-FF01M01000] Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set... the operation of the Hawaii-based shallow-set longline fishery that targets swordfish (Xiphias gladius... albatross, by NMFS in its regulation of the shallow-set longline fishery based in Hawaii. This fishery...

76 FR 55703 - Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings...

Science.gov (United States)

2011-09-08

..., and physical and cyber security systems. The new JOC also must meet State essential service criteria... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings for the Joint Operations Center Relocation Project...

Development of the methodology for application of revised source term to operating nuclear power plants in Korea

International Nuclear Information System (INIS)

Kang, M.S.; Kang, P.; Kang, C.S.; Moon, J.H.

2004-01-01

Considering the current trend in applying the revised source term proposed by NUREG-1465 to the nuclear power plants in the U.S., it is expected that the revised source term will be applied to the Korean operating nuclear power plants in the near future, even though the exact time can not be estimated. To meet the future technical demands, it is necessary to prepare the technical system including the related regulatory requirements in advance. In this research, therefore, it is intended to develop the methodology to apply the revised source term to operating nuclear power plants in Korea. Several principles were established to develop the application methodologies. First, it is not necessary to modify the existing regulations about source term (i.e., any back-fitting to operating nuclear plants is not necessary). Second, if the pertinent margin of safety is guaranteed, the revised source term suggested by NUREG-1465 may be useful to full application. Finally, a part of revised source term could be selected to application based on the technical feasibility. As the results of this research, several methodologies to apply the revised source term to the Korean operating nuclear power plants have been developed, which include: 1) the selective (or limited) application to use only some of all the characteristics of the revised source term, such as release timing of fission products and chemical form of radio-iodine and 2) the full application to use all the characteristics of the revised source term. The developed methodologies are actually applied to Ulchin 9 and 4 units and their application feasibilities are reviewed. The results of this research are used as either a manual in establishing the plan and the procedure for applying the revised source term to the domestic nuclear plant from the utility's viewpoint; or a technical basis of revising the related regulations from the regulatory body's viewpoint. The application of revised source term to operating nuclear

Guide to hazardous industrial activities: handbook for the cataloguing and selection of industrial activities for which an Emergency Management Plan ought to be drafted

NARCIS (Netherlands)

Ham, J.M.; Blom-Bruggeman, J.M.

1989-01-01

A methodology has been developed for the cataloguing of hazardous (industrial) activities and the evaluation of these activities as part of the process of formulating an emergency management plan. This guide will enable priorities to be set at local level (district, region) for the drafting of

Brief Comment on the Draft Land Administration, Use, Registration ...

African Journals Online (AJOL)

D_Behailu

The draft 'Land Administration, Use, Registration and Plan Proclamation (2007. EC)' has been in circulation for a while now. One of the prime objectives of the draft law is to address various counterproductive restrictions in the current federal land proclamation. According to its preamble, the draft aspires to expand the rights ...

Rapid Operational Access and Maneuver Support (ROAMS) Platform for Improved Military Logistics Lines of Communication and Operational Vessel Routing

Science.gov (United States)

2017-06-01

discussed in detail. Toolbox: AdH. AdH is a finite element engine capable of solving the 2D and three-dimensional (3D) shallow water equations, the...sites will be the shortest that exists on the mesh. However, the algorithm neither guarantees that the found path will satisfy all navigation...between resolution and computation time. Penalty Function: Draft. The draft constraint ensures that the vessel operates only in sufficiently deep

Staff supplement to the draft report on human engineering guide to control room evaluation: response to comments, sample checklist, draft systems review guidelines, and evaluation procedures

International Nuclear Information System (INIS)

1981-03-01

This staff supplement to Draft Report NUREG/CR-1580, Human Engineering Guide to Control Room Evaluation, provides staff responses to comments on the draft report and supplemental material not provided in the draft report. The supplemental material includes new draft guidelines for the systems review of nuclear power plant control rooms and sample checklists and corresponding human engineering guidelines

Influence of upstream disturbance on the draft-tube flow of Francis turbine under part-load conditions

Science.gov (United States)

Chen, Ting; Zheng, Xianghao; Zhang, Yu-ning; Li, Shengcai

2018-02-01

Owing to the part-load operations for the enhancement of grid flexibility, the Francis turbine often suffers from severe low-frequency and large-amplitude hydraulic instability, which is mostly pertinent to the highly unsteady swirling vortex rope in the draft tube. The influence of disturbances in the upstream (e.g., large-scale vortex structures in the spiral casing) on the draft-tube vortex flow is not well understood yet. In the present paper, the influence of the upstream disturbances on the vortical flow in the draft tube is studied based on the vortex identification method and the analysis of several important parameters (e.g., the swirl number and the velocity profile). For a small guide vane opening (representing the part-load condition), the vortices triggered in the spiral casing propagate downstream and significantly affect the swirling vortex-rope precession in the draft tube, leading to the changes of the intensity and the processional frequency of the swirling vortex rope. When the guide vane opening approaches the optimum one (representing the full-load condition), the upstream disturbance becomes weaker and thus its influences on the downstream flow are very limited.

Methodology for risk assessment and reliability applied for pipeline engineering design and industrial valves operation

Energy Technology Data Exchange (ETDEWEB)

Silveira, Dierci [Universidade Federal Fluminense (UFF), Volta Redonda, RJ (Brazil). Escola de Engenharia Industrial e Metalurgia. Lab. de Sistemas de Producao e Petroleo e Gas], e-mail: dsilveira@metal.eeimvr.uff.br; Batista, Fabiano [CICERO, Rio das Ostras, RJ (Brazil)

2009-07-01

Two kinds of situations may be distinguished for estimating the operating reliability when maneuvering industrial valves and the probability of undesired events in pipelines and industrial plants: situations in which the risk is identified in repetitive cycles of operations and situations in which there is a permanent hazard due to project configurations introduced by decisions during the engineering design definition stage. The estimation of reliability based on the influence of design options requires the choice of a numerical index, which may include a composite of human operating parameters based on biomechanics and ergonomics data. We first consider the design conditions under which the plant or pipeline operator reliability concepts can be applied when operating industrial valves, and then describe in details the ergonomics and biomechanics risks that would lend itself to engineering design database development and human reliability modeling and assessment. This engineering design database development and reliability modeling is based on a group of engineering design and biomechanics parameters likely to lead to over-exertion forces and working postures, which are themselves associated with the functioning of a particular plant or pipeline. This approach to construct based on ergonomics and biomechanics for a more common industrial valve positioning in the plant layout is proposed through the development of a methodology to assess physical efforts and operator reach, combining various elementary operations situations. These procedures can be combined with the genetic algorithm modeling and four elements of the man-machine systems: the individual, the task, the machinery and the environment. The proposed methodology should be viewed not as competing to traditional reliability and risk assessment bur rather as complementary, since it provides parameters related to physical efforts values for valves operation and workspace design and usability. (author)

Draft Environmental Statement related to the operation of Seabrook Station, Units 1 and 2. Docket Nos. 50-443 and 50-444, Public Service Company of New Hampshire, et al

International Nuclear Information System (INIS)

1982-05-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with the operation of the Seabrook Station, Units 1 and 2 pursuant to the National Environmental Policy Act of 1969 (NEPA) and 10 CFR 51, as amended, of the NRC regulations. This statement examines: the effected environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs. Land use and terrestrial and aquatic-ecological impacts will be small. Operational impacts to historic and archeological sites will be negligible. The effects of routine operations, energy transmission, and periodic maintenance of rights-of-way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity. The risk associated with accidental radiation exposure is very low. The net socioeconomic effects of the project will be beneficial. The action called for is the issuance of an operating license for Seabrook Station, Units 1 and 2

A statistical method for draft tube pressure pulsation analysis

International Nuclear Information System (INIS)

Doerfler, P K; Ruchonnet, N

2012-01-01

Draft tube pressure pulsation (DTPP) in Francis turbines is composed of various components originating from different physical phenomena. These components may be separated because they differ by their spatial relationships and by their propagation mechanism. The first step for such an analysis was to distinguish between so-called synchronous and asynchronous pulsations; only approximately periodic phenomena could be described in this manner. However, less regular pulsations are always present, and these become important when turbines have to operate in the far off-design range, in particular at very low load. The statistical method described here permits to separate the stochastic (random) component from the two traditional 'regular' components. It works in connection with the standard technique of model testing with several pressure signals measured in draft tube cone. The difference between the individual signals and the averaged pressure signal, together with the coherence between the individual pressure signals is used for analysis. An example reveals that a generalized, non-periodic version of the asynchronous pulsation is important at low load.

IRIS Toxicological Review of Methanol (Noncancer) (Interagency Science Discussion Draft)

Science.gov (United States)

On May 3, 2013, the Toxicological Review of Methanol (noncancer) (Revised External Review Draft) was posted for public review and comment. Subsequently, the draft Toxicological Review, Appendices, and draft IRIS Summary were reviewed internally by EPA and by other federal agenci...

India's draft nuclear doctrine

International Nuclear Information System (INIS)

Kapur, A.

2000-01-01

India's draft nuclear doctrine and its nuclear and missile testing are a response to recent international, regional and domestic developments. Nehru's policy of nuclear disarmament, non-discriminatory international arrangements and unilateral restraint has been overturned in favour of self-reliant security and negotiated nuclear restraints. The draft nuclear doctrine is aimed at transparency and formalization of existing capacities. It is anchored in the United Nations Charter, based on the legitimacy of self-defence and espouses minimum nuclear deterrence. After the launching of Pokhran II, the debate in India has been settled on weaponization and deployment. The doctrine is not country-specific with respect to threat perceptions, but the author posits that the long-term focus is on China and the short-term on Pakistan. The doctrine emphasizes civilian command and control. India's decision to test incurred diplomatic and other economic costs, but afforded new opportunities for the country to assert itself militarily and politically in Asia and in the world. There were no diplomatic costs in issuing the draft nuclear doctrine, but the author estimates the economic costs of a full-blown (triad) Indian nuclear deterrent. (author)

77 FR 66483 - Public Comment on the Draft Federal Urban Design Element and the Draft Update to the Federal...

Science.gov (United States)

2012-11-05

... NCPC review required by law. The new Federal Urban Design Element provides policies that will guide the... public comment a draft new Federal Urban Design Element and draft revisions to the Preservation and... Features Element articulates policies that guide federal actions preserving Washington's historic character...

In Brief: Geoengineering draft statement

Science.gov (United States)

Showstack, Randy

2009-04-01

The American Meteorological Society (AMS) has prepared a draft policy statement on geoengineering the climate system, which the AMS Council is considering for approval. The statement notes, “Geoengineering will not substitute for either aggressive mitigation or proactive adaptation. It could contribute to a comprehensive risk management strategy to slow climate change and alleviate its negative impacts, but the potential for adverse and unintended consequences implies a need for adequate research, appropriate regulation, and transparent consideration.” The statement, if adopted, indicates that AMS recommends enhanced research on the scientific and technological potential for geoengineering the climate system; additional study of the historical, ethical, legal, political, and societal aspects of the geoengineering issues; and the development and analysis of policy options to promote transparency and international cooperation in exploring geoengineering options along with restrictions on reckless efforts to manipulate the climate system. AMS is accepting comments on the draft statement until 23 April. For more information, visit http://ametsoc.org/policy/draftstatements/index.html#draft.

76 FR 54507 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

Science.gov (United States)

2011-09-01

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0204] Proposed Generic Communication; Draft NRC Generic... functions. SSCs in operating nuclear power plants are designed either in accordance with, or have been... nuclear reactors. The background information relevant to this GL includes the individual plant...

Advanced software development workstation: Object-oriented methodologies and applications for flight planning and mission operations

Science.gov (United States)

Izygon, Michel

1993-01-01

The work accomplished during the past nine months in order to help three different organizations involved in Flight Planning and in Mission Operations systems, to transition to Object-Oriented Technology, by adopting one of the currently most widely used Object-Oriented analysis and Design Methodology is summarized.

Advanced Best-Estimate Methodologies for Thermal-Hydraulics Stability Analyses with TRACG code and Improvements on Operating Boiling Water Reactors

International Nuclear Information System (INIS)

Vedovi, J.; Trueba, M.; Ibarra, L; Espino, M.; Hoang, H.

2016-01-01

In recent years GE Hitachi has introduced two advanced methodologies to address the thermal-hydraulics instabilities in Boiling Water Reactors (BWRs); the “Detect and Suppress Solution - Confirmation Density (DSS-CD)” and the “GEH Simplified Stability Solution (GS3).” These two methodologies are based on Best-Estimate Plus Uncertainty (BEPU) analyses and provide significant improvement on safety, plant maneuvering and fuel economics with respect to existing solutions. DSS-CD and GS3 solutions have been recently approved by the United States Nuclear Regulatory Commission. This paper describes the main characteristics of these two stability methodologies and shares the experience of their recent implementation in operating BWRs. The BEPU approach provided a much deeper understanding of the parameters affecting instabilities in operating BWRs and allowed for better calculation of plant setpoints by improving plant manoeuvring restrictions and reducing manual operator actions. DSS-CD and GS3 methodologies are both based on safety analyses performed with the best-estimate system code TRACG. The assessment of uncertainty is performed following the Code Scaling, Applicability and Uncertainty (CSAU) methodology documented in NUREG/CR-5249. The two solutions have been already implemented in a combined 18 BWR units with 7 more units in the process of transitioning. The main results demonstrate a significant decrease (>0.1) in the stability based Operating Limit Minimum Critical Power Ratio (OLMCPR), which possibly results in significant fuel savings and the increase in allowable stability plant setpoints that address instability events such as the one occurred at the Fermi 2 plant in 2015 and can help prevent unnecessary Scrams. The paper also describes the advantages of reduced plant manoeuvring as a result to transitioning to these solutions; in particular the history of a BWR/6 transition to DSS-CD is discussed.

10 CFR 51.77 - Distribution of draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Production and Utilization Facilities § 51.77 Distribution of draft environmental impact statement. (a) In addition to the distribution...

APET methodology for Defense Waste Processing Facility: Mode C operation

International Nuclear Information System (INIS)

Taylor, R.P. Jr.; Massey, W.M.

1995-04-01

Safe operation of SRS facilities continues to be the highest priority of the Savannah River Site (SRS). One of these facilities, the Defense Waste Processing Facility or DWPF, is currently undergoing cold chemical runs to verify the design and construction preparatory to hot startup in 1995. The DWPFF is a facility designed to convert the waste currently stored in tanks at the 200-Area tank farm into a form that is suitable for long term storage in engineered surface facilities and, ultimately, geologic isolation. As a part of the program to ensure safe operation of the DWPF, a probabilistic Safety Assessment of the DWPF has been completed. The results of this analysis are incorporated into the Safety Analysis Report (SAR) for DWPF. The usual practice in preparation of Safety Analysis Reports is to include only a conservative analysis of certain design basis accidents. A major part of a Probabilistic Safety Assessment is the development and quantification of an Accident Progression Event Tree or APET. The APET provides a probabilistic representation of potential sequences along which an accident may progress. The methodology used to determine the risk of operation of the DWPF borrows heavily from methods applied to the Probabilistic Safety Assessment of SRS reactors and to some commercial reactors. This report describes the Accident Progression Event Tree developed for the Probabilistic Safety Assessment of the DWPF

76 FR 77431 - Decommissioning Planning During Operations

Science.gov (United States)

2011-12-13

... (DG) DG-4014, ``Decommissioning Planning During Operations.'' This guide describes a method that the.... The draft regulatory guide entitled, ``Decommissioning Planning During Operations,'' is temporarily..., 40, 50, 70, and 72 RIN 3150-AI55 [NRC-2011-0286; NRC-2008-0030] Decommissioning Planning During...

Debate on the Draft--Helping Students Decide Where They Stand.

Science.gov (United States)

Victory, James

1981-01-01

Presents four exercises to help secondary school social studies students understand the complex issues of the draft. Students participate in a mock draft lottery, analyze Phil Och's Draft Dodger Rag, examine how individual experiences affect attitudes, and compare writings by Bill Mauldin and Ron Kovic. (KC)

78 FR 79706 - Office of the Assistant Secretary-Water and Science; Draft Environmental Assessment of the...

Science.gov (United States)

2013-12-31

...; and updating pump stations and regulating ponds to accommodate the changing pattern of water demand... Assistant Secretary--Water and Science; Draft Environmental Assessment of the Proposed Increase in Operation, Maintenance and Replacement Activities Associated With the Wasatch County Water Efficiency Project AGENCY...

Draft Genome Sequences of Six Mycobacterium immunogenum, Strains Obtained from a Chloraminated Drinking Water Distribution System Simulator

Science.gov (United States)

We report the draft genome sequences of six Mycobacterium immunogenum isolated from a chloraminated drinking water distribution system simulator subjected to changes in operational parameters. M. immunogenum, a rapidly growing mycobacteria previously reported as the cause of hyp...

10 CFR 51.73 - Request for comments on draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Request for comments on draft environmental impact...-Regulations Implementing Section 102(2) Environmental Impact Statements § 51.73 Request for comments on draft environmental impact statement. Each draft environmental impact statement and each supplement to a draft...

46 CFR 169.755 - Draft marks and draft indicating systems.

Science.gov (United States)

2010-10-01

... Section 169.755 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and... projections of the marks onto a vertical plane are of uniform height equal to the vertical spacing between...

10 CFR 51.72 - Supplement to draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Supplement to draft environmental impact statement. 51.72... Implementing Section 102(2) Environmental Impact Statements § 51.72 Supplement to draft environmental impact statement. (a) The NRC staff will prepare a supplement to a draft environmental impact statement for which a...

Increasing draft capability for retrofit flue gas desulfurization systems

International Nuclear Information System (INIS)

Petersen, R.D.; Basel, B.E.; Mosier, R.J.

1992-01-01

The retrofit installation of flue gas desulfurization (FGD) systems results in significantly higher draft losses for existing generating stations. Consequently, the means for increasing draft capability must be included in many FGD retrofit projects. Consideration is given to several alternatives for increasing draft capability. Alternatives are developed for new induced draft (ID) fans to replace the existing ID fans and for new booster fans to supplement the existing ID fans. Both centrifugal and axial fans are evaluated, as are different means of fan volume control. Each alternative is evaluated on the basis of technical merit and economics. Presented are the development of fan alternatives and results of the technical and economic evaluations

Outsourcing strategy and tendering methodology for the operation and maintenance of CERN’s cryogenic facilities

Science.gov (United States)

Serio, L.; Bremer, J.; Claudet, S.; Delikaris, D.; Ferlin, G.; Ferrand, F.; Pezzetti, M.; Pirotte, O.

2017-12-01

CERN operates and maintains the world largest cryogenic infrastructure ranging from ageing but well maintained installations feeding detectors, test facilities and general services, to the state-of-the-art cryogenic system serving the flagship LHC machine complex. A study was conducted and a methodology proposed to outsource to industry the operation and maintenance of the whole cryogenic infrastructure. The cryogenic installations coupled to non LHC-detectors, test facilities and general services infrastructure have been fully outsourced for operation and maintenance on the basis of performance obligations. The contractor is responsible for the operational performance of the installations based on a yearly operation schedule provided by CERN. The maintenance of the cryogenic system serving the LHC machine and its detectors has been outsourced on the basis of tasks oriented obligations, monitored by key performance indicators. CERN operation team, with the support of the contractor operation team, remains responsible for the operational strategy and performances. We report the analysis, strategy, definition of the requirements and technical specifications as well as the achieved technical and economic performances after one year of operation.

Draft Transportaion Business Plan

International Nuclear Information System (INIS)

1985-08-01

The Office of Civilian Radioactive Waste Management (OCRWM) is responsible for establishing a transportation system to support shipment of spent fuel and high-level radioactive waste to repositories and storage facilities developed under the Nuclear Waste Policy Act of 1982 (NWPA). An element that assists in fulfilling that responsibility is a business plan for acquiring and operating a transportation system. The Draft Transportation Business Plan is an interim step in the process of procuring the transportation system. It sets the context for business strategy decisions by providing pertinent background information, describing the legislation and policies governing transportation under the NWPA, and with establishing the transportation system. It also serves as an instrument for initiating communication between OCRWM and other interested parties. Included in the docuument are strategies for procuring shipping casks and transportation support services. Additionally, in the spirit of the NWPA directive to utilize the private sector to the maximum extent possible, opportunities for business ventures are obvious throughout the system development cycle

Solar tower enhanced natural draft dry cooling tower

Science.gov (United States)

Yang, Huiqiang; Xu, Yan; Acosta-Iborra, Alberto; Santana, Domingo

2017-06-01

Concentrating Solar Power (CSP) plants are located in desert areas where the Direct Normal Irradiance (DNI) value is very high. Since water resource is scarcely available, mechanical draft cooing technology is commonly used, with power consumption of mechanical fans being approximately 2% of the total power generated. Today, there is only one solar power plant (Khi Solar One in South Africa) uses a condenser installed in a Natural Draft Cooling (NDC) tower that avoids the windage loss of water occurring in wet cooling towers. Although, Khi Solar One is a cavity receiver power tower, the receivers can be hung onto the NDC tower. This paper looks at a novel integration of a NDC tower into an external molten salt receiver of a solar power plant, which is one of a largest commercial molten salt tower in China, with 100MWe power capacity. In this configuration study, the NDC tower surrounds the concrete tower of the receiver concentrically. In this way, the receiver concrete tower is the central support of the NDC tower, which consists of cable networks that are fixed to the concrete tower and suspended at a certain height over the floor. The cable networks support the shell of the NDC tower. To perform a preliminary analysis of the behavior of this novel configuration, two cases of numerical simulation in three dimensional (3D) models have been solved using the commercial Computational Fluid Dynamics (CFD) code, ANSYS Fluent 6.3. The results show that the integration of the NDC tower into an external central receiver tower is feasible. Additionally, the total heat transfer rate is not reduced but slightly increases when the molten salt receiver is in operation because of the additional natural draft induced by the high temperature of the receiver.

A study of swirl flow in draft tubes

Energy Technology Data Exchange (ETDEWEB)

Dahlhaug, Ole Gunnar

1997-12-31

This thesis presents measurements performed inside conical diffuser and bend, draft tubes of model hydro turbines, and draft tube of a prototype hydro turbine. Experimental results for swirling flow in conical diffuser and bend are presented in three different geometries. The axial velocity decreases at the centre of the tube at high swirl numbers because of an axial pressure gradient set up by the downstream frictional damping of the tangential velocities and the pressure increase downstream of the diffuser. Analytical models of the tangential velocity profiles are found and the radial pressure distribution calculated. Good correlation to the measured pressure distribution was achieved. Diffuser efficiency was calculated based on the equations for velocity and pressure profiles, which gave a qualified estimate of the diffuser hydraulic performance. The calculation shows that the bend reduces the efficiency by more than 30%. For a straight tube followed by a diffuser, numerical calculations were done, using K{epsilon}, RNG and RSM turbulence models for all measured swirl numbers. The K{epsilon} model gave best results for the forced vortex profile at low swirl numbers, while the RSM model gave best results at high swirl number. The turbulent kinetic energy at high swirl numbers gave the largest difference between the calculated and the measured values. Measurements on draft tubes in model turbines show the importance of good draft tube design. Prototype measurements on a Francis turbine show how the outlet draft tube flow should be measured for prototype draft tube evaluation. 54 refs., 118 figs., 2 tabs.

A study of swirl flow in draft tubes

Energy Technology Data Exchange (ETDEWEB)

Dahlhaug, Ole Gunnar

1998-12-31

This thesis presents measurements performed inside conical diffuser and bend, draft tubes of model hydro turbines, and draft tube of a prototype hydro turbine. Experimental results for swirling flow in conical diffuser and bend are presented in three different geometries. The axial velocity decreases at the centre of the tube at high swirl numbers because of an axial pressure gradient set up by the downstream frictional damping of the tangential velocities and the pressure increase downstream of the diffuser. Analytical models of the tangential velocity profiles are found and the radial pressure distribution calculated. Good correlation to the measured pressure distribution was achieved. Diffuser efficiency was calculated based on the equations for velocity and pressure profiles, which gave a qualified estimate of the diffuser hydraulic performance. The calculation shows that the bend reduces the efficiency by more than 30%. For a straight tube followed by a diffuser, numerical calculations were done, using K{epsilon}, RNG and RSM turbulence models for all measured swirl numbers. The K{epsilon} model gave best results for the forced vortex profile at low swirl numbers, while the RSM model gave best results at high swirl number. The turbulent kinetic energy at high swirl numbers gave the largest difference between the calculated and the measured values. Measurements on draft tubes in model turbines show the importance of good draft tube design. Prototype measurements on a Francis turbine show how the outlet draft tube flow should be measured for prototype draft tube evaluation. 54 refs., 118 figs., 2 tabs.

75 FR 29357 - Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and...

Science.gov (United States)

2010-05-25

... technology that is used to aid in inspecting high-density cargo containers for contraband such as illicit... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and Operation of High Energy X-Ray...

77 FR 14047 - Guidance for Decommissioning Planning During Operations

Science.gov (United States)

2012-03-08

...)-4014, ``Decommissioning Planning During Operations.'' This action is necessary to correct the NRC's... NUCLEAR REGULATORY COMMISSION [NRC-2011-0286] Guidance for Decommissioning Planning During Operations AGENCY: Nuclear Regulatory Commission. ACTION: Draft regulatory guide; correction. SUMMARY: The U...

78 FR 26616 - Draft NOAA Five Year Research and Development Plan

Science.gov (United States)

2013-05-07

... DEPARTMENT OF COMMERCE Draft NOAA Five Year Research and Development Plan AGENCY: National Oceanic and Atmospheric Administration (NOAA), Department of Commerce (DOC). ACTION: Draft NOAA Five Year Research and Development Plan for Public Review. SUMMARY: NOAA's draft Five Year Research and Development...

Numerical simulation of draft tube flow of a bulb turbine

Energy Technology Data Exchange (ETDEWEB)

Coelho, J.G. [Federal University of Triangulo Mineiro, Institute of Technological and Exact Sciences, Avenida Doutor Randolfo Borges Junior, 1250 – Uberaba – MG (Brazil); Brasil, A.C.P. Jr. [University of Brasilia, Department of Mechanical Engineering, Campus Darcy Ribeiro, Brasilia – DF (Brazil)

2013-07-01

In this work a numerical study of draft tube of a bulb hydraulic turbine is presented, where a new geometry is proposed. This new proposal of draft tube has the unaffected ratio area, a great reduction in his length and approximately the same efficiency of the draft tube conventionally used. The numerical simulations were obtained in commercial software of calculation of flow (CFX-14), using the turbulence model SST, that allows a description of the field fluid dynamic near to the wall. The simulation strategy has an intention of identifying the stall of the boundary layer precisely limits near to the wall and recirculations in the central part, once those are the great causes of the decrease of efficiency of a draft tube. Finally, it is obtained qualitative and quantitative results about the flow in draft tubes.

Draft of regulations for road transport of radioactive wastes

International Nuclear Information System (INIS)

Gese, J.; Zizka, B.

1979-06-01

A draft regulation is presented for the transport of solid and solidified radioactive wastes from nuclear power plants. The draft takes into consideration dosimetric, safety and fire-fighting directives, transport organization, anticipated amounts of radioactive wastes, characteristics of containers, maintenance of vehicles, and equipment of vehicles and personnel. The draft is based on the provisional regulations governing the transport on public roads issued in 1973, valid directives, decrees, acts and standards, and complies with 1973 IAEA requirements. (J.P.)

Analysis of the Kaplan turbine draft tube effect

International Nuclear Information System (INIS)

Motycak, L; Skotak, A; Obrovsky, J

2010-01-01

The aim of this paper is to present information about possible problems and errors which can appear during numerical analyses of low head Kaplan turbines with a view to the runner - draft tube interaction. The setting of numerical model, grid size, used boundary conditions are the interface definition between runner and draft tube are discussed. There are available data from physical model tests which gives a great opportunity to compare CFD and experiment results and on the basis of this comparison to determine the approach to the CFD flow modeling. The main purpose for the Kaplan turbine model measurement was to gather the information about real flow field. The model tests were carried out in new hydraulic laboratory of CKD Blansko Engineering. The model tests were focused on the detailed velocity measurements downstream of the runner by differential pressure probe and on the velocity measurement downstream of the draft tube elbow by Particle Image Velocimetry method (PIV). The data from CFD simulation were compared to the velocity measurement results. In the paper also the design of the original draft tube modification due to flow improvement is discussed in the case of the Kaplan turbine uprating project. The results of the draft tube modification were confirmed by model tests in the hydraulic laboratory as well.

Analysis of the Kaplan turbine draft tube effect

Energy Technology Data Exchange (ETDEWEB)

Motycak, L; Skotak, A; Obrovsky, J, E-mail: motycak.vhs@cbeng.c [CKD Blansko Engineering, a.s., Capkova 2357/5, Blansko 67801 (Czech Republic)

2010-08-15

The aim of this paper is to present information about possible problems and errors which can appear during numerical analyses of low head Kaplan turbines with a view to the runner - draft tube interaction. The setting of numerical model, grid size, used boundary conditions are the interface definition between runner and draft tube are discussed. There are available data from physical model tests which gives a great opportunity to compare CFD and experiment results and on the basis of this comparison to determine the approach to the CFD flow modeling. The main purpose for the Kaplan turbine model measurement was to gather the information about real flow field. The model tests were carried out in new hydraulic laboratory of CKD Blansko Engineering. The model tests were focused on the detailed velocity measurements downstream of the runner by differential pressure probe and on the velocity measurement downstream of the draft tube elbow by Particle Image Velocimetry method (PIV). The data from CFD simulation were compared to the velocity measurement results. In the paper also the design of the original draft tube modification due to flow improvement is discussed in the case of the Kaplan turbine uprating project. The results of the draft tube modification were confirmed by model tests in the hydraulic laboratory as well.

Analysis of the Kaplan turbine draft tube effect

Science.gov (United States)

Motycak, L.; Skotak, A.; Obrovsky, J.

2010-08-01

The aim of this paper is to present information about possible problems and errors which can appear during numerical analyses of low head Kaplan turbines with a view to the runner - draft tube interaction. The setting of numerical model, grid size, used boundary conditions are the interface definition between runner and draft tube are discussed. There are available data from physical model tests which gives a great opportunity to compare CFD and experiment results and on the basis of this comparison to determine the approach to the CFD flow modeling. The main purpose for the Kaplan turbine model measurement was to gather the information about real flow field. The model tests were carried out in new hydraulic laboratory of CKD Blansko Engineering. The model tests were focused on the detailed velocity measurements downstream of the runner by differential pressure probe and on the velocity measurement downstream of the draft tube elbow by Particle Image Velocimetry method (PIV). The data from CFD simulation were compared to the velocity measurement results. In the paper also the design of the original draft tube modification due to flow improvement is discussed in the case of the Kaplan turbine uprating project. The results of the draft tube modification were confirmed by model tests in the hydraulic laboratory as well.

I-880 Integrated Corridor Management Concept of Operation : Final Submittal: Concept of Operations for the I-880 Corridor in Oakland, California

Science.gov (United States)

2008-03-31

This report describes the draft Concept of Operations that has been developed for the Integrated Corridor Mobility (ICM) program by the I-880 corridor team. The I-880 corridor team has defined this Concept of Operations (ConOps) based on two primary ...

Experimental investigation of the local wave speed in a draft tube with cavitation vortex rope

International Nuclear Information System (INIS)

Landry, C; Favrel, A; Müller, A; Yamamoto, K; Avellan, F; Nicolet, C

2014-01-01

Hydraulic machines operating in a wider range are subjected to cavitation developments inducing undesirable pressure pulsations which could lead to potential instability of the power plant. The occurrence of pulsating cavitation volumes in the runner and the draft tube is considered as a mass source of the system and is depending on the cavitation compliance. This dynamic parameter represents the cavitation volume variation with the respect to a variation of pressure and defines implicitly the local wave speed in the draft tube. This parameter is also decisive for an accurate prediction of system eigen frequencies. Therefore, the local wave speed in the draft tube is intrinsically linked to the eigen frequencies of the hydraulic system. Thus, if the natural frequency of a hydraulic system can be determined experimentally, it also becomes possible to estimate a local wave speed in the draft tube with a numerical model. In the present study, the reduced scale model of a Francis turbine (v=0.29) was investigated at off-design conditions. In order to measure the first eigenmode of the hydraulic test rig, an additional discharge was injected at the inlet of the hydraulic turbine at a variable frequency and amplitude to excite the system. Thus, with different pressure sensors installed on the test rig, the first eigenmode was determined. Then, a hydro-acoustic test rig model was developed with the In-house EPFL SIMSEN software and the local wave speed in the draft tube was adjusted to obtain the same first eigen frequency as that measured experimentally. Finally, this method was applied for different Thoma and Froude numbers at part load conditions

Experimental investigation of the local wave speed in a draft tube with cavitation vortex rope

Science.gov (United States)

Landry, C.; Favrel, A.; Müller, A.; Nicolet, C.; Yamamoto, K.; Avellan, F.

2014-03-01

Hydraulic machines operating in a wider range are subjected to cavitation developments inducing undesirable pressure pulsations which could lead to potential instability of the power plant. The occurrence of pulsating cavitation volumes in the runner and the draft tube is considered as a mass source of the system and is depending on the cavitation compliance. This dynamic parameter represents the cavitation volume variation with the respect to a variation of pressure and defines implicitly the local wave speed in the draft tube. This parameter is also decisive for an accurate prediction of system eigen frequencies. Therefore, the local wave speed in the draft tube is intrinsically linked to the eigen frequencies of the hydraulic system. Thus, if the natural frequency of a hydraulic system can be determined experimentally, it also becomes possible to estimate a local wave speed in the draft tube with a numerical model. In the present study, the reduced scale model of a Francis turbine (v=0.29) was investigated at off-design conditions. In order to measure the first eigenmode of the hydraulic test rig, an additional discharge was injected at the inlet of the hydraulic turbine at a variable frequency and amplitude to excite the system. Thus, with different pressure sensors installed on the test rig, the first eigenmode was determined. Then, a hydro-acoustic test rig model was developed with the In-house EPFL SIMSEN software and the local wave speed in the draft tube was adjusted to obtain the same first eigen frequency as that measured experimentally. Finally, this method was applied for different Thoma and Froude numbers at part load conditions.

16 CFR 1.84 - Draft environmental impact statements: Availability and comment.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Draft environmental impact statements... Environmental Policy Act of 1969 § 1.84 Draft environmental impact statements: Availability and comment. Except for proposals for legislation, environmental impact statements shall be prepared in two stages: Draft...

10 CFR 51.76 - Draft environmental impact statement-limited work authorization.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-limited work...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Production and Utilization Facilities § 51.76 Draft environmental impact statement—limited work authorization. The NRC will prepare a...

10 CFR 51.117 - Draft environmental impact statement-notice of availability.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-notice of... environmental impact statement—notice of availability. (a) Upon completion of a draft environmental impact statement or any supplement to a draft environmental impact statement, the appropriate NRC staff director...

78 FR 77027 - Overhead Clearance (Air-Draft) Accidents

Science.gov (United States)

2013-12-20

... No. USCG-2013-0466] Overhead Clearance (Air-Draft) Accidents AGENCY: Coast Guard, DHS. ACTION... clearance (air-draft) accidents. In its petition, which calls for vessel masters to be provided with... accidents that it says were avoidable and that resulted in damage to or destruction of waterway...

76 FR 9210 - Draft DOC National Aquaculture Policy

Science.gov (United States)

2011-02-16

... DEPARTMENT OF COMMERCE Draft DOC National Aquaculture Policy AGENCY: Commerce. ACTION: Notice of availability of draft aquaculture policy; request for comments. SUMMARY: The Department of Commerce (DOC) is... United States. The intent of the policy is to guide DOC's actions and decisions on aquaculture and to...

23 CFR 771.123 - Draft environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Draft environmental impact statements. 771.123 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.123 Draft environmental impact statements. (a) A... significant impacts on the environment. When the applicant, after consultation with any project sponsor that...

Introduction to Production/Manufacturing Drafting. Drafting Module 8. Instructor's Guide.

Science.gov (United States)

Missouri Univ., Columbia. Instructional Materials Lab.

This module, 1 of 10 in the Drafting curriculum guide developed in Missouri, contains 3 units of study that include some or all of the following components: performance objectives, lesson plans, information sheets, transparency masters, handouts, assignment sheets, job sheets, a unit test, and answers to the unit test. Special instructions on…

Joint NEPA/SEPA draft environmental impact statement Washington Windplant No. 1

International Nuclear Information System (INIS)

1995-02-01

This is the draft Environmental Impact Statement for a proposed construction and operation of a 115 megawatt Washington Windplant No. 1 by KENETECH Windpower, Inc in Klickitat County, Washington. The Project would be constructed on private land (5,110 hectares) under easement to KENETECH Windpower, Inc., and would include approximately 345 type 33M-VS wind turbines. Alternatives to the Proposed Action include an alternative powerline route; a restricted areas alternative; a subarea development alternative; a no-action alternative

Considerations about noise aspects in the EEC draft directive physical agents

NARCIS (Netherlands)

Passchier-Vermeer, W.

1992-01-01

This report contains an overview of and considerations about the Working Draft of a future EEC Directive Physical Agents (draft 1991). The overview in this report is limited to noise exposure. The Draft gives minimum regulations concerning the protection of workers and prevention against the risks

77 FR 40354 - Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using Diesel Fuels-Draft

Science.gov (United States)

2012-07-09

... through the UIC Class II Program, the well class for oil and gas activities. Geothermal activities are not... inject diesel fuels during hydraulic fracturing related to oil, gas, or geothermal operations must obtain... geothermal activities, the draft guidance only covers hydraulic fracturing using diesel fuels related to oil...

Requirements to be met by the operation manual

International Nuclear Information System (INIS)

1981-03-01

The rule applies to the contents and the lay-out of the operating manual for stationary nuclear power plants. The draft contains: 1. General requirement to be met by the contents of the operating manual. The operating manual to be arranged in 4 parts (part 1: internal rules and regulations; part 2: operation overall plant; part 3: incidents; part 4: operation systems). Safety specifications to be included in the manual, the exemption being the system of technical documentation. 2. General requirements to be met by the lay-out of the operating manual. Comprehensibility; legibility; structure and subdivisions; arrangement of the instructions and design of the manuals cover. 3. Requirements to be met by part 1. Defining the various internal rules and regulations (personnel management); rules and regulations concerning inspections and shift work; maintenance and repair; radiation protection; guard duty and admission; alarm; fire protection; first aid. 4. Requirements to be met by part 2. Provisions and operational limitations; limit values important from the point of view of safety; normal operation; anomalous operation; in-service inspections. 6. Requirements to be met by part 3. 7. Annex: Rules, regulations and stipulations mentioned in the rule draft. (orig.)

LDV survey of cavitation and resonance effect on the precessing vortex rope dynamics in the draft tube of Francis turbines

Science.gov (United States)

Favrel, A.; Müller, A.; Landry, C.; Yamamoto, K.; Avellan, F.

2016-11-01

The large-scale penetration of the electrical grid by intermittent renewable energy sources requires a continuous operating range extension of hydropower plants. This causes the formation of unfavourable flow patterns in the draft tube of turbines and pump-turbines. At partial load operation, a precessing cavitation vortex rope is formed at the Francis turbine runner outlet, acting as an excitation source for the hydraulic system. In case of resonance, the resulting high-amplitude pressure pulsations can put at risk the stability of the machine and of the electrical grid to which it is connected. It is therefore crucial to understand and accurately simulate the underlying physical mechanisms in such conditions. However, the exact impact of cavitation and hydro-acoustic resonance on the flow velocity fluctuations in the draft tube remains to be established. The flow discharge pulsations expected to occur in the draft tube in resonance conditions have for instance never been verified experimentally. In this study, two-component Laser Doppler Velocimetry is used to investigate the axial and tangential velocity fluctuations at the runner outlet of a reduced scale physical model of a Francis turbine. The investigation is performed for a discharge equal to 64 % of the nominal value and three different pressure levels in the draft tube, including resonance and cavitation-free conditions. Based on the convective pressure fluctuations induced by the vortex precession, the periodical velocity fluctuations over one typical precession period are recovered by phase averaging. The impact of cavitation and hydro-acoustic resonance on both axial and tangential velocity fluctuations in terms of amplitude and phase shift is highlighted for the first time. It is shown that the occurrence of resonance does not have significant effects on the draft tube velocity fields, suggesting that the synchronous axial velocity fluctuations are surprisingly negligible compared to the velocity

Numerical Simulation and Validation of a High Head Model Francis Turbine at Part Load Operating Condition

Science.gov (United States)

Goyal, Rahul; Trivedi, Chirag; Kumar Gandhi, Bhupendra; Cervantes, Michel J.

2017-07-01

Hydraulic turbines are operated over an extended operating range to meet the real time electricity demand. Turbines operated at part load have flow parameters not matching the designed ones. This results in unstable flow conditions in the runner and draft tube developing low frequency and high amplitude pressure pulsations. The unsteady pressure pulsations affect the dynamic stability of the turbine and cause additional fatigue. The work presented in this paper discusses the flow field investigation of a high head model Francis turbine at part load: 50% of the rated load. Numerical simulation of the complete turbine has been performed. Unsteady pressure pulsations in the vaneless space, runner, and draft tube are investigated and validated with available experimental data. Detailed analysis of the rotor stator interaction and draft tube flow field are performed and discussed. The analysis shows the presence of a rotating vortex rope in the draft tube at the frequency of 0.3 times of the runner rotational frequency. The frequency of the vortex rope precession, which causes severe fluctuations and vibrations in the draft tube, is predicted within 3.9% of the experimental measured value. The vortex rope results pressure pulsations propagating in the system whose frequency is also perceive in the runner and upstream the runner.

Methodological frontier in operational analysis for roundabouts: a review

Directory of Open Access Journals (Sweden)

Orazio Giuffre'

2016-11-01

Full Text Available Several studies and researches have shown that modern roundabouts are safe and effective as engineering countermeasures for traffic calming, and they are now widely used worldwide. The increasing use of roundabouts and, more recently, turbo and flower roundabouts, has induced a great variety of experiences in the field of intersection design, traffic safety and capacity modelling. As for unsignalized intersections which represent the starting point to extend knowledge about the operational analysis to roundabouts, the general situation in capacity estimation is still characterized by the discussion between gap acceptance models and empirical regression models. However, capacity modelling must contain both the analytical construction and then solution of the model, and the implementation of driver behavior. Thus, issues on a realistic modelling of driver behavior by the parameters that are included into the models are always of interest for practioners and analysts in transportation and road infrastructure engineering. Based on these considerations, this paper presents a literature review about the key methodological issues in the operational analysis of modern roundabouts. Focus is made on the aspects associated with the gap acceptance behavior, the derivation of the analytical-based models and the calculation of parameters included into the capacity equations, as well as steady state and non-steady state conditions and uncertainty in entry capacity estimation. At last, insights on future developments of the research in this field of investigation will be also outlined.

78 FR 66010 - Draft Risk Profile on Pathogens and Filth in Spices; Availability

Science.gov (United States)

2013-11-04

...] Draft Risk Profile on Pathogens and Filth in Spices; Availability AGENCY: Food and Drug Administration... availability of a draft risk profile entitled ``FDA Draft Risk Profile: Pathogens and Filth in Spices'' (draft... posed by consumption of spices in the United States by identifying the most commonly occurring microbial...

Draft 1988 mission plan amendment

International Nuclear Information System (INIS)

1988-06-01

This draft 1988 amendment to the Mission Plan for the Civilian Radioactive Waste Management Program has been prepared by the US Department of Energy (DOE). The purpose is to inform the Congress of the DOE's plans for implementing the provisions of the Nuclear Waste Policy Amendments Act of 1987 (P.L. 100-203) for the Civilian Radioactive Waste Management Program. This document is being submitted in draft form to Federal agencies, states, previously affected Indian Tribes, affected units of local government, and the public. After the consideration of comments, this amendment will be revised as appropriate and submitted to the Congress. 39 refs., 7 figs., 4 tabs

Application of the HGPT methodology of reactor operation problems with a nodal mixed method

International Nuclear Information System (INIS)

Baudron, A.M.; Bruna, G.B.; Gandini, A.; Lautard, J.J.; Monti, S.; Pizzigati, G.

1998-01-01

The heuristically based generalized perturbation theory (HGPT), to first and higher order, applied to the neutron field of a reactor system, is discussed in relation to quasistatic problems. This methodology is of particular interest in reactor operation. In this application it may allow an on-line appraisal of the main physical responses of the reactor system when subject to alterations relevant to normal system exploitation, e.g. control rod movement, and/or soluble boron concentration changes to be introduced, for instance, for compensating power level variations following electrical network demands. In this paper, after describing the main features of the theory, its implementation into the diffusion, 3D mixed dual nodal code MINOS of the SAPHYR system is presented. The results from a small scale investigation performed on a simplified PWR system corroborate the validity of the methodology proposed

Estimation of the laser cutting operating cost by support vector regression methodology

Science.gov (United States)

Jović, Srđan; Radović, Aleksandar; Šarkoćević, Živče; Petković, Dalibor; Alizamir, Meysam

2016-09-01

Laser cutting is a popular manufacturing process utilized to cut various types of materials economically. The operating cost is affected by laser power, cutting speed, assist gas pressure, nozzle diameter and focus point position as well as the workpiece material. In this article, the process factors investigated were: laser power, cutting speed, air pressure and focal point position. The aim of this work is to relate the operating cost to the process parameters mentioned above. CO2 laser cutting of stainless steel of medical grade AISI316L has been investigated. The main goal was to analyze the operating cost through the laser power, cutting speed, air pressure, focal point position and material thickness. Since the laser operating cost is a complex, non-linear task, soft computing optimization algorithms can be used. Intelligent soft computing scheme support vector regression (SVR) was implemented. The performance of the proposed estimator was confirmed with the simulation results. The SVR results are then compared with artificial neural network and genetic programing. According to the results, a greater improvement in estimation accuracy can be achieved through the SVR compared to other soft computing methodologies. The new optimization methods benefit from the soft computing capabilities of global optimization and multiobjective optimization rather than choosing a starting point by trial and error and combining multiple criteria into a single criterion.

Study on the Development of Methodology for Cost Calculations and Financial Planning of Decommissioning Operations

International Nuclear Information System (INIS)

2001-12-01

The following study deals with the development of methodology for cost calculations and financial planning of decommissioning operations. It has been carried out by EDF / FRAMATOME / VUJE / SCK-CEN in the frame of the contract B7-032/2000/291058/MAR/C2 awarded by the European Commission. This study consists of 4 parts. The first task objective is to develop a reliable and transparent methodology for cost assessment and financial planning sufficient precise but without long and in depth investigations and studies. This methodology mainly contains: Calculation methods and algorithms for the elaboration of costs items making up the whole decommissioning cost. Estimated or standard values for the parameters and for the cost factors to be used in the above-mentioned algorithms Financial mechanism to be applied as to establish a financial planning. The second part task is the provision of standard values for the different parameters and costs factors described in the above-mentioned algorithms. This provision of data is based on the own various experience acquired by the members of the working team and on existing international references (databases, publications and reports). As decommissioning operations are spreading over several dozens of years, the scope of this task the description of the financial mechanisms to be applied to the different cost items as to establish a complete financial cost. It takes into account the financial schedule issued in task 1. The scope of this task consists in bringing together in a guideline all the information collected before: algorithms, data and financial mechanisms. (A.L.B.)

The National Football League Combine: performance differences between drafted and nondrafted players entering the 2004 and 2005 drafts.

Science.gov (United States)

Sierer, S Patrick; Battaglini, Claudio L; Mihalik, Jason P; Shields, Edgar W; Tomasini, Nathan T

2008-01-01

The purpose of this study was to examine performance differences between drafted and nondrafted athletes (N = 321) during the 2004 and 2005 National Football League (NFL) Combines. We categorized players into one of 3 groups: Skill, Big skill, and Linemen. Skill players (SP) consisted of wide receivers, cornerbacks, free safeties, strong safeties, and running backs. Big skill players (BSP) included fullbacks, linebackers, tight ends, and defensive ends. Linemen (LM) consisted of centers, offensive guards, offensive tackles, and defensive tackles. We analyzed player height and mass, as well as performance on the following combine drills: 40-yard dash, 225-lb bench press test, vertical jump, broad jump, pro-agility shuttle, and the 3-cone drill. Student t-tests compared performance on each of these measures between drafted and nondrafted players. Statistical significance was found between drafted and nondrafted SP for the 40-yard dash (P ready themselves for the NFL Combine.

Implementation of a management system for operating organizations of research reactors

International Nuclear Information System (INIS)

Kibrit, Eduardo; Aquino, Afonso Rodrigues de; Zouain, Desiree Moraes

2011-01-01

This paper presents the requirements established by an IAEA draft technical document for the implementation of a management system for operating organisations of research reactors. The following aspects will be discussed: structure of IAEA draft technical document, management system requirements, processes common to all research reactors, aspects for the implementation of the management system, and a formula for grading the management system requirements. (author)

Implementation of a management system for operating organizations of research reactors

Energy Technology Data Exchange (ETDEWEB)

Kibrit, Eduardo, E-mail: kibrit@ctmsp.mar.mil.b [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil); Aquino, Afonso Rodrigues de; Zouain, Desiree Moraes, E-mail: araquino@ipen.b, E-mail: dmzouain@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

This paper presents the requirements established by an IAEA draft technical document for the implementation of a management system for operating organisations of research reactors. The following aspects will be discussed: structure of IAEA draft technical document, management system requirements, processes common to all research reactors, aspects for the implementation of the management system, and a formula for grading the management system requirements. (author)

A State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Drafting (Graphic Communications). Part I--Basic. Part II--Specialty Programs. Section A (Mechanical Drafting and Design). Section B (Architectural Drafting and Design).

Science.gov (United States)

North Carolina State Dept. of Community Colleges, Raleigh.

A two-part articulation instructional objective guide for drafting (graphic communications) is provided. Part I contains summary information on seven blocks (courses) of instruction. They are as follow: introduction; basic technical drafting; problem solving in graphics; reproduction processes; freehand drawing and sketching; graphics composition;…

77 FR 51981 - Notice of Intent To Prepare a Draft Environmental Impact Statement on the Construction and...

Science.gov (United States)

2012-08-28

... Draft Environmental Impact Statement on the Construction and Operation of the Everglades Agricultural... Basin (FEB) at the location of the Everglades Agricultural Area (EAA) A1 Reservoir project that was not... implementing the procedural requirements of NEPA (33 CFR part 230, USACE Engineering Regulation ER 200-2-2). A...

Nanomaterial Case Studies: Nanoscale Titanium Dioxide (External Review Draft)

Science.gov (United States)

This draft document presents two case studies of nanoscale titanium dioxide (nano-TiO2) used (1) to remove arsenic from drinking water and (2) as an active ingredient in topical sunscreen. The draft case studies are organized around a comprehensive environmental asses...

Comments from the Developmental Neurotoxicology Committee of the Japanese Teratology Society on the OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426, Developmental Neurotoxicity Study, Draft Document (October 2006 version), and on the Draft Document of the Retrospective Performance Assessment of the Draft Test Guideline 426 on Developmental Neurotoxicity.

Science.gov (United States)

Ema, Makoto; Fukui, Yoshihiro; Aoyama, Hiroaki; Fujiwara, Michio; Fuji, Junichiro; Inouye, Minoru; Iwase, Takayuki; Kihara, Takahide; Oi, Akihide; Otani, Hiroki; Shinomiya, Mitsuhiro; Sugioka, Kozo; Yamano, Tsunekazu; Yamashita, Keisuke H; Tanimura, Takashi

2007-06-01

In October 2006, a new revision of the draft guideline (OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426. Developmental Neurotoxicity Study) and Draft Document of the Retrospective Performance Assessment (RPA) of the Draft Test Guideline 426 on Developmental Neurotoxicity were distributed following incorporation of the results of the Expert Consultation Meeting in Tokyo on May 24-26, 2005. The draft guideline consists of 50 paragraphs and an appendix with 102 references; and the draft RPA consists of 37 paragraphs with 109 references. National coordinators were requested to arrange for national expert reviews of these draft documents in their member countries. Members of the Developmental Neurotoxicology (DNT) Committee of the Japanese Teratology Society (JTS) reviewed, discussed, and commented on the draft Test Guideline Proposal. The DNT Committee of the JTS also commented on the draft document of the RPA. These comments were sent to the OECD Secretariat. The DNT Committee of the JTS expects the comments to be useful for the finalization of these draft documents.

Sea ice draft in the Weddell Sea, measured by upward looking sonars

Directory of Open Access Journals (Sweden)

A. Behrendt

2013-06-01

Full Text Available The presented database contains time-referenced sea ice draft values from upward looking sonar (ULS measurements in the Weddell Sea, Antarctica. The sea ice draft data can be used to infer the thickness of the ice. They were collected during the period 1990–2008. In total, the database includes measurements from 13 locations in the Weddell Sea and was generated from more than 3.7 million measurements of sea ice draft. The files contain uncorrected raw drafts, corrected drafts and the basic parameters measured by the ULS. The measurement principle, the data processing procedure and the quality control are described in detail. To account for the unknown speed of sound in the water column above the ULS, two correction methods were applied to the draft data. The first method is based on defining a reference level from the identification of open water leads. The second method uses a model of sound speed in the oceanic mixed layer and is applied to ice draft in austral winter. Both methods are discussed and their accuracy is estimated. Finally, selected results of the processing are presented. The data can be downloaded from doi:10.1594/PANGAEA.785565.

1 CFR 15.10 - Information on drafting and publication.

Science.gov (United States)

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Information on drafting and publication. 15.10... drafting and publication. The Director of the Federal Register may prepare, and distribute to agencies... chapter. The Director may also develop and conduct programs of technical instruction. ...

Jovan Hadžić's civil procedure code draft (1845

Directory of Open Access Journals (Sweden)

Stanković Uroš

2013-01-01

Full Text Available The article sheds light on civil procedure code draft prepared by renown Serbian lawmaker Jovan Hadžić in 1845. Contrarily to Hadžić's work on producing civil code, his efforts to write civil procedure code are to a large extent obscure. Original text of the draft has not been found. Therefore, one is imposed to reconstruct it with the aid of auxiliary sources, among which the record kept by the commission tasked with revision of the draft, has prevailing significance. The author made an attempt to determine the structure of the draft, as well as the contents of its provisions as accurately as possible, wherein the remarks that the Commission had made were of most assistance. Hadžić consigned his draft to the Prince Aleksandar Karađorđević on August 4th 1845. The Draft consisted of introduction and three parts. The introduction comprised of general provisions. Therein was stipulated principle of trial by written declaration, determined five kinds of courts before which civil procedure should occur and established vacatio legis. The first and concviningly largest part of the Draft was most likely entitled 'On principal litigations and litigation evidence' ('O parnicama glavnima i parničnim dokazatelstvima'. It included diverse rules, such as proceedings before peace courts, proceedings before district courts, ordinary course of litigation (i. e. rules in terms of filing a complaint, scheduling of hearings, subpoenas delivery, procurement of evidence, trial, bankruptcy proceedings, forms of evidence, presentation of evidence and deliberation of judgment, appellate procedure, new trial and enforcement procedure. The third part subsumed the title named 'likvidacija' (literally 'liquidation', whose contents is undeterminable on the basis of existing text of the draft, resolution of bankruptcy proceedings via settlement, resolution of regular litigations via settlement, title named 'on special proceedings and advantages' ('o osobenom

Fuel Receiving and Storage Station. Nuclear Regulatory Commission's draft environmental statement

International Nuclear Information System (INIS)

1975-05-01

A draft of the environmental impact statement for the Barnwell Fuel Receiving and Storage Station is presented. This facility is being constructed on a 1700 acre site about six miles west of the city of Barnwell in Barnwell County, South Carolina. The following topics are discussed: the site, the station, environmental effects of site preparation and station construction, environmental effects of station operation, effluent and environmental monitoring programs, environmental effects of accidents , need for the station, benefit-cost analysis of alternatives, and conclusions. (U.S.)

Methodological aspects of the use of materials from remote photographs in oil and gas search operations

Energy Technology Data Exchange (ETDEWEB)

Kostryukov, M I; Tsarenko, P T

1981-01-01

Presented are the methodological characteristics of the use of materials from remote probes in oil and gas search operations within the central part of the western Siberian plain. Examined briefly are ways to increase the effectiveness of interpreting deep structures and the necessity for an amplification in the development of automated systems for interpretation is show.

Draft of textbook focused on indirect taxes

OpenAIRE

Nováková, Hana

2012-01-01

The diploma thesis is about draft of textbook which is focused on indirect taxes for business school. The thesis is divided into theoretical and practical part. The theoretical part is focused on teaching tax issues at business school. Readers are introduced with basic studying documents, for example framework educational program and school educational program. In the following part I have conducted didactic analysis of curriculum and textbook of economics for business schools. The draft of t...

Draft Environmental Statement related to the operation of Beaver Valley Power Station, Unit 2 (Docket No. 50-412)

International Nuclear Information System (INIS)

1984-12-01

This Draft Environmental Statement contains the second assessment of the environmental impact associated with Beaver Valley Power Station Unit 2 pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environment, environmental consequences and mitigating actions, and environmental benefits and costs

Drafting. A Bilingual Text = Dibujo Mecanico. Un Texto Bilingue.

Science.gov (United States)

Los Angeles Unified School District, CA. Div. of Career and Continuing Education.

This bilingual instructional text, one in a series of six texts covering various vocational and technical topics, provides secondary level English and Spanish instruction in drafting. Addressed in the individual units are the following topics: safety, drafting tools and techniques, sketching, geometric construction, working drawings, sectioning,…

Stuart oil shale project stage two: executive summary: draft environmental impact statement

International Nuclear Information System (INIS)

1999-09-01

The project is an oil shale open pit mine and processing operation that is currently being commissioned 15 km north of Gladstone, Queensland, Australia, and is owned as a joint venture by Southern Pacific Petroleum N.L., Central Pacific Minerals N.L, and Suncor Energy Inc., a leading Canadian company that is an integrated energy company. The results of a comprehensive investigation are included of the potential environmental impacts of the project, and which are described in the Draft Environmental Impact Statement (EIS). In stage two, there is included the existing mine expansion as well as the construction of an additional process plant based around a larger commercial scale ATP oil shale processing plant. The new stage two operation will be developed next to and integral with services and infrastructure provided for stage one. Described are: the assessment process, regulatory framework and the project area, the needs for an alternative to the project, the proposal itself, the existing natural, social and economic impacts, and the environmental impacts as well as plans for their mitigation. In appendices there are included a draft environmental management overview strategy and an environmental management plan. The elements covered in the report by section are: background, need for the project, the proponent, legislation and approvals, project description, environmental issues and impact management

77 FR 29317 - Fiscal Year 2012 Draft Work Plan

Science.gov (United States)

2012-05-17

... DENALI COMMISSION Fiscal Year 2012 Draft Work Plan AGENCY: Denali Commission. ACTION: Notice... Commission develop proposed work plans for future spending and that the annual Work Plan be published in the... Commission Draft Work Plan for Federal Fiscal Year 2012. DATES: Comments and related material to be received...

78 FR 69139 - Physical Security-Design Certification and Operating Reactors

Science.gov (United States)

2013-11-18

... Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard review plan--draft section..., ``Physical Security--Design Certification and Operating Reactors.'' The public comment period was originally....regulations.gov and search for Docket ID NRC-2013-0225. Address questions about NRC dockets to Carol Gallagher...

[Critical evaluation of the first draft of DSM-V].

Science.gov (United States)

Frances, A

2011-02-16

Critical evaluation of DSM-V first draft This is an evaluation of the first DSM-V (Diagnostic and Statistical Manual of Mental Disorders-V) draft from the DSM-IV chairman. First, a brief history of DSM is reported. Then, major reasons for present controversies and the threat they raise to APA leadership in the field are discussed. Third point is careful recollection of the several conflicting aspects of the DSM-V draft, paying attention to drawbacks and their implications for future clinical practice, research and forensic activity. Comment is finally provided about APA (American Psychiatric Association) decisions aimed at reaching more consensus about this basic instrument of American psychiatry.

Optimization of operating parameters in polysilicon chemical vapor deposition reactor with response surface methodology

Science.gov (United States)

An, Li-sha; Liu, Chun-jiao; Liu, Ying-wen

2018-05-01

In the polysilicon chemical vapor deposition reactor, the operating parameters are complex to affect the polysilicon's output. Therefore, it is very important to address the coupling problem of multiple parameters and solve the optimization in a computationally efficient manner. Here, we adopted Response Surface Methodology (RSM) to analyze the complex coupling effects of different operating parameters on silicon deposition rate (R) and further achieve effective optimization of the silicon CVD system. Based on finite numerical experiments, an accurate RSM regression model is obtained and applied to predict the R with different operating parameters, including temperature (T), pressure (P), inlet velocity (V), and inlet mole fraction of H2 (M). The analysis of variance is conducted to describe the rationality of regression model and examine the statistical significance of each factor. Consequently, the optimum combination of operating parameters for the silicon CVD reactor is: T = 1400 K, P = 3.82 atm, V = 3.41 m/s, M = 0.91. The validation tests and optimum solution show that the results are in good agreement with those from CFD model and the deviations of the predicted values are less than 4.19%. This work provides a theoretical guidance to operate the polysilicon CVD process.

Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

Science.gov (United States)

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

Draft Environmental Impact Statement. MX Deployment Area Selection and Land Withdrawal/Acquisition DEIS. Volume IV. Part II. Environmental Consequences to the Study Regions and Operating Base Vicinities.

Science.gov (United States)

1980-12-01

Subtitle) 5. TYPE OF REPORT & PERIOD COVERED Draft Environmental Impact Statement-MX Draft-December 80 Deployment Alea Selection-Environmental...recreation, a weekend at the lake, the opportunity to be alone with yourself and your family, the clean air to see the next mountain and the freedom to...traffic volumes and projected traffic volumes during the peak construction year. In mountain passes, where capacity is severely reduced by steep grades

Drafting Lab Management Guide.

Science.gov (United States)

Ohio State Univ., Columbus. Instructional Materials Lab.

This manual was developed to guide drafting instructors and vocational supervisors in sequencing laboratory instruction and controlling the flow of work for a 2-year machine trades training program. The first part of the guide provides information on program management (program description, safety concerns, academic issues, implementation…

Evaluations for draft reports on geological disposal

International Nuclear Information System (INIS)

Maekawa, Keisuke; Igarashi, Hiroshi

2002-10-01

This report summarizes the results of the technical evaluations on two reports which are named as 'Overview of the Geological Disposal Facility' and Considerable Factors on Selection of Potential Sites for Geological Disposal' drafted by NUMO (Nuclear Waste Management Organization of Japan). The review of each draft report has been referred to committee (held on 9th September, 2002) and working group (held on 1st October, 2002) which were organized in order to confirm a progress of implementation of geological disposal by government. (author)

Investigations into dynamics of a draft of mine cars with two locomotives during electric braking

Energy Technology Data Exchange (ETDEWEB)

Sikora-Iliew, R; Szklarski, L; Thuc, Thai Duy

1983-03-01

The computerized simulation of electric braking of a draft of GRANBY-5 mine cars and two locomotives (Ld2 locomotives with LDO30 electric series motors) is discussed. The following stages of simulation are analyzed: constructing a mathematical model of the draft of mine cars during electric (dynamic) braking, equations which describe dynamic states of locomotives, mine cars and electric motors during dynamic braking, equations for stability assessment of the draft during dynamic braking. The analog model for simulation of dynamic braking of the draft is given. Simulation results are shown in 10 diagrams. The WAT-1000 hybrid computer is used. Simulation shows that dynamic braking causes occurrence of maximum forces in the couplers between a locomotive and a mine car. When two locomotives are used the maximum force in couplers is lower than in a draft with one locomotive. Braking distance does not depend on position of locomotives in a draft of mine cars. Doubling draft speed causes braking distance to increase by 4 times. Optimum stability conditions of a draft of mine cars are guaranteed when one locomotive is placed at the draft head and a second is separated from the first one by one third of the draft length. 6 references

Investigations of unsteady flow in the draft tube of the pump- turbine model using laser Doppler anemometry

International Nuclear Information System (INIS)

Kaznacheev, A; Kuznetsov, I

2014-01-01

The measurements and video observation of unsteady flow in the draft tube cone of the pump-turbine model were conducted in the Laboratory of Water Turbines, property of OJSC ''Power machines'' - ''LMZ''. The prototype head was about 250 m. The experiments were performed for the turbine mode of operation. Measurements were taken for the unit speed value n11 corresponding to rated head in the generating mode of operation, for a wide range of guide vanes openings at loads ranging from partial to maximum value. The researches of the velocity field in function of the Thoma number were carried out in some operating conditions. The mean values and RMS deviations of the velocity components were the results of laser measurements. The curves of the intensity of the vortex versus the guide vane opening and the Thoma number were plotted. The energy velocity spectra were presented for the points at which the most pronounced frequency precession of the helical axial vortex was observed. Video recording and laser Doppler anemometry were made in the operating conditions of the developed cavitation. Based on the results of video observations and energy spectra obtained via LDA, vortex frequencies were determined i.e. the frequencies of the vortex precession under the runner in the draft tube cone

Track 6: safety and risk management. Plant operational risk management. Plant Configuration Risk Assessment Methodology Development for Periodic Maintenance

International Nuclear Information System (INIS)

Yang, Huichang; Chung, Chang Hyun; Sung, Key Yong

2001-01-01

As the operation experiences of nuclear power plants (NPPs) in Korea accumulate and NPP safety functions become enhanced, the role of stable and optimal NPP operation within acceptable safety criteria becomes important at present. To accomplish the goal of safe and optimal operation, maintenance and its related activities should be regarded as the issues of most concern. Studies of methodologies for maintenance improvement and optimization have focused on system performance rather than on the hardware itself. From this point of view, the probabilistic methods are most useful. In terms of risk including core damage frequency and unavailability, the cause that might impact plant safety during normal maintenance activities can be identified and evaluated effectively. The results from these probabilistic analyses can provide insightful information for the reallocation of risk-contributing maintenance activity. This information can be utilized in a way that separates the significant risk-contributing maintenance activities from each other unless they are timely related. In Korea, the risk-monitoring program for operating NPPs is under development and will be implemented in 2003. To accomplish the risk-monitoring program objectives, suitable risk evaluation methods should be developed before the implementation of the risk-monitoring program. The plant configuration assessment methodology was developed for these reasons, and this method is to incorporate the field experiences into the risk calculation exactly within the limit of probabilistic methods. During normal plant operation, the plant operational risk changes frequently depending on the status of the plant system and the arrangement of the components. Specific plant systems or components are typically removed from service because of random equipment failure, planned preventive/predictive maintenance, corrective maintenance, surveillance testing, and operational bypass activities, and such events usually impact the

75 FR 9613 - Draft NIJ Restraints Standard for Criminal Justice

Science.gov (United States)

2010-03-03

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1512] Draft NIJ Restraints Standard for Criminal Justice AGENCY: National Institute of Justice, Office of Justice Programs, DOJ. ACTION: Notice of Draft NIJ Restraints Standard for Criminal Justice and Certification Program...

76 FR 61402 - Draft Nuclear Regulatory Commission Fiscal Year 2012-2016 Strategic Plan

Science.gov (United States)

2011-10-04

...-2016 Strategic Plan AGENCY: Nuclear Regulatory Commission. ACTION: Draft NUREG; request for comment... comment on draft NUREG-1614, Volume 5. ``U.S. Nuclear Regulatory Commission, FY 2012-2016 Strategic Plan,'' dated September 2011. The NRC's draft FY 2012-2016 strategic plan describes the agency's mission and...

Design optimization of hydraulic turbine draft tube based on CFD and DOE method

Science.gov (United States)

Nam, Mun chol; Dechun, Ba; Xiangji, Yue; Mingri, Jin

2018-03-01

In order to improve performance of the hydraulic turbine draft tube in its design process, the optimization for draft tube is performed based on multi-disciplinary collaborative design optimization platform by combining the computation fluid dynamic (CFD) and the design of experiment (DOE) in this paper. The geometrical design variables are considered as the median section in the draft tube and the cross section in its exit diffuser and objective function is to maximize the pressure recovery factor (Cp). Sample matrixes required for the shape optimization of the draft tube are generated by optimal Latin hypercube (OLH) method of the DOE technique and their performances are evaluated through computational fluid dynamic (CFD) numerical simulation. Subsequently the main effect analysis and the sensitivity analysis of the geometrical parameters of the draft tube are accomplished. Then, the design optimization of the geometrical design variables is determined using the response surface method. The optimization result of the draft tube shows a marked performance improvement over the original.

Drafting of the closure of the Asse salt mine. Final report

International Nuclear Information System (INIS)

Schneefuss, J.U.

2001-01-01

The report of the R and D-project 'Drafting of the closure of the Asse salt mine' contains the results of the first phases 'Basic findings' and 'Predrafting'. These phases were started after the backfilling of the south flank of the Asse salt mine was permitted in accordance to 2.2 of the operating program 'Future work at the Asse salt mine'. The knowledge status of May 2000 is reported. The result obtained in this program provides the basis for future drafting the closure of the Asse salt mine. The final results will include the long-term safety assessment to obtain the permission of the mining authorities for the closure of the Asse salt mine. The evaluation of the basic data has shown that further investigations are necessary. During the predrafting period the method for backfilling of the cavities, transport of the backfill and backfill and closure of the shafts were developed. Other parts of the concept for the closure are not finalized (control of the brine inflow when starting backfilling above the 658-m-level, minimizing of the possible effects of dissolution of carnallitite, avoiding of squeezing brines from deeper cavities through the disposal chambers etc.). (orig.) [de

Development of a Pattern Recognition Methodology for Determining Operationally Optimal Heat Balance Instrumentation Calibration Schedules

Energy Technology Data Exchange (ETDEWEB)

Kurt Beran; John Christenson; Dragos Nica; Kenny Gross

2002-12-15

The goal of the project is to enable plant operators to detect with high sensitivity and reliability the onset of decalibration drifts in all of the instrumentation used as input to the reactor heat balance calculations. To achieve this objective, the collaborators developed and implemented at DBNPS an extension of the Multivariate State Estimation Technique (MSET) pattern recognition methodology pioneered by ANAL. The extension was implemented during the second phase of the project and fully achieved the project goal.

49 CFR 520.23 - Preparation of draft environmental impact statements.

Science.gov (United States)

2010-10-01

... social, economic, and environmental consequences. (b) Form and content requirements. Attachment 1 of this... environmental issues involved and take responsibility for the scope and content of draft and final environmental... 49 Transportation 6 2010-10-01 2010-10-01 false Preparation of draft environmental impact...

Replacement Nuclear Research Reactor. Supplement to Draft Environmental Impact Statement. Volume 3

International Nuclear Information System (INIS)

1999-01-01

The Draft Environmental Impact Statement for a replacement research reactor at Lucas Heights, was available for public examination and comment for some three months during 1998. A Supplement to the Draft Environmental Impact Statement (Draft EIS) has been completed and was lodged with Environment Australia on 18 January 1999. The Supplement is an important step in the overall environmental assessment process. It reviews submissions received and provides the proponent's response to issues raised in the public review period. General issues extracted from submissions and addressed in the Supplement include concern over liability issues, Chernobyl type accidents, the ozone layer and health issues. Further studies, relating to issues raised in the public submission process, were undertaken for the Supplementary EIS. These studies confirm, in ANSTO's view, the findings of the Draft EIS and hence the findings of the Final EIS are unchanged from the Draft EIS

Replacement Nuclear Research Reactor. Supplement to Draft Environmental Impact Statement. Volume 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

The Draft Environmental Impact Statement for a replacement research reactor at Lucas Heights, was available for public examination and comment for some three months during 1998. A Supplement to the Draft Environmental Impact Statement (Draft EIS) has been completed and was lodged with Environment Australia on 18 January 1999. The Supplement is an important step in the overall environmental assessment process. It reviews submissions received and provides the proponent`s response to issues raised in the public review period. General issues extracted from submissions and addressed in the Supplement include concern over liability issues, Chernobyl type accidents, the ozone layer and health issues. Further studies, relating to issues raised in the public submission process, were undertaken for the Supplementary EIS. These studies confirm, in ANSTO`s view, the findings of the Draft EIS and hence the findings of the Final EIS are unchanged from the Draft EIS

Optimization of Operating Conditions of a Household Up-draft Biomass Gasification Stove

Directory of Open Access Journals (Sweden)

Shuanghui Deng

2015-05-01

Full Text Available Experiments were carried out with a household up-draft biomass gasification stove to investigate effects of the air distribution method on the performance of the stove. The temperature distribution along the gasifier, the producer gas composition, the stove power, and the thermal efficiency were investigated. Results showed that in the temperature distribution along the gasifier height, the highest temperature was at the bottom oxidation layer of the gasifier, in the range of 950 to 1050 °C. With increasing air quantity through the burner, the time required to boil the water first decreased and then increased, whereas the stove power and thermal efficiency increased and then decreased. The best stove performance was obtained at an optimum air distribution ratio of 0.333 between burner and gasifier air (0.794×10-3 m3/s·kg. When the burner air increased, the flame length above the burner was remarkably reduced and the flame color gradually changed from yellow-red to blue. At the optimum air distribution ratio of 0.333, the flame was blue and stable. The present study provides references for developing a more efficient biomass gasification stove.

Operability test report for core sample truck number one flammable gas modifications

International Nuclear Information System (INIS)

Akers, J.C.

1997-01-01

This report primarily consists of the original test procedure used for the Operability Testing of the flammable gas modifications to Core Sample Truck No. One. Included are exceptions, resolutions, comments, and test results. This report consists of the original, completed, test procedure used for the Operability Testing of the flammable gas modifications to the Push Mode Core Sample Truck No. 1. Prior to the Acceptance/Operability test the truck No. 1 operations procedure (TO-080-503) was revised to be more consistent with the other core sample truck procedures and to include operational steps/instructions for the SR weather cover pressurization system. A draft copy of the operations procedure was used to perform the Operability Test Procedure (OTP). A Document Acceptance Review Form is included with this report (last page) indicating the draft status of the operations procedure during the OTP. During the OTP 11 test exceptions were encountered. Of these exceptions four were determined to affect Acceptance Criteria as listed in the OTP, Section 4.7 ACCEPTANCE CRITERIA

Development of Non-LOCA Safety Analysis Methodology with RETRAN-3D and VIPRE-01/K

International Nuclear Information System (INIS)

Kim, Yo-Han; Cheong, Ae-Ju; Yang, Chang-Keun

2004-01-01

Korea Electric Power Research Institute has launched a project to develop an in-house non-loss-of-coolant-accident analysis methodology to overcome the hardships caused by the narrow analytical scopes of existing methodologies. Prior to the development, some safety analysis codes were reviewed, and RETRAN-3D and VIPRE-01 were chosen as the base codes. The codes have been modified to improve the analytical capabilities required to analyze the nuclear power plants in Korea. The methodologies of the vendors and the Electric Power Research Institute have been reviewed, and some documents of foreign utilities have been used to compensate for the insufficiencies. For the next step, a draft methodology for pressurized water reactors has been developed and modified to apply to Westinghouse-type plants in Korea. To verify the feasibility of the methodology, some events of Yonggwang Units 1 and 2 have been analyzed from the standpoints of reactor coolant system pressure and the departure from nucleate boiling ratio. The results of the analyses show trends similar to those of the Final Safety Analysis Report

Environmental impact statement analysis: dose methodology

International Nuclear Information System (INIS)

Mueller, M.A.; Strenge, D.L.; Napier, B.A.

1981-01-01

Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

Methodology of complexity analysis of Emergency Operating Procedures for Nuclear Power Plants; Metodologia de analisis de complejidad de Procedimientos de Operacion de Emergencia de Centrales Nucleares

Energy Technology Data Exchange (ETDEWEB)

Martorell, P.; Martorell, S.; Marton, I.; Pelayo, F.; Mendizabal, R.

2013-07-01

The Emergency Operating Procedures (SOPs) set out the stages and contain actions to be executed by an operator to respond to an emergency situation. Methodologies are being developed to assess aspects such as complexity, completeness and vulnerability of these procedures. A methodology is presented in this paper to develop a network topology POE and analysis focused on the same complexity as a fundamental attribute.

78 FR 56271 - FY 2014-2020 Draft VA Strategic Plan

Science.gov (United States)

2013-09-12

... DEPARTMENT OF VETERANS AFFAIRS FY 2014-2020 Draft VA Strategic Plan AGENCY: Department of Veterans... Affairs (VA) is announcing the availability of the FY 2014-2020 Draft VA Strategic Plan (Strategic Plan... Act of 2010 (GPRAMA) (Pub. L. 111-352). The Strategic Plan provides the Department's long-term...

The Bacteriostasis Study of Nisin for the Raspberry Health Draft Beer

Science.gov (United States)

Sun, Jinxu; Zhu, Hui xia; Guo, Jiping; Xiao, Dong Guang

The raspberry healthy draft beer was obtained by adding the extracting of raspberry into the raw fermentation materials of beer, in order to prolong the shelf life, the different concentrations nisin were added to the the raspberry healthy draft beer, the result shown that nisin could have obvious influence on the shelf life, the shelf life prolonged with nisin concentrations adding, the shelf life raspberry healthy draft beer was 44d after adding 0.02 nisin mg/mL, the shelf life prolonged 36d than blank.

A multivariate statistical methodology for detection of degradation and failure trends using nuclear power plant operational data

International Nuclear Information System (INIS)

Samanta, P.K.; Teichmann, T.

1990-01-01

In this paper, a multivariate statistical method is presented and demonstrated as a means for analyzing nuclear power plant transients (or events) and safety system performance for detection of malfunctions and degradations within the course of the event based on operational data. The study provides the methodology and illustrative examples based on data gathered from simulation of nuclear power plant transients (due to lack of easily accessible operational data). Such an approach, once fully developed, can be used to detect failure trends and patterns and so can lead to prevention of conditions with serious safety implications

Taxation of Income from Selling Property: Changes of New Income Tax Law Draft

Directory of Open Access Journals (Sweden)

Canatay HACIKÖYLÜ

2016-12-01

Full Text Available There are provisions in Income Tax Law No. 193 and Corporate Tax Law No. 5520 on the nature and taxation of income that real and legal persons acquire from real estate sales. There have been many changes in these provisions over time, but the changes made didnt meet the needs, and they distorted the systematic structure of the Laws. For these and similar reasons, the income tax law draft has been prepared based on Income Tax Law and Corporate Tax Law. With the draft, the Income Tax Law No. 193 and the Corporate Tax Law No. 5520 will be abolished. Draft is aimed to regulate the procedures and principles regarding the income tax on the income of real persons and institutions. In this study, the current situation and the regulations of the draft will be discussed. Moreover, It will be evaluate whether the regulations in the draft law are sufficient. Suggestions will be put forth to determine and declare the real value of the property in order to achieve the intended objectives in draft.

75 FR 22162 - Draft NIJ Duty Holster Retention Standard for Law Enforcement

Science.gov (United States)

2010-04-27

...In an effort to obtain comments from interested parties, the U.S. Department of Justice, Office of Justice Programs, National Institute of Justice will make available to the general public two draft documents: (1) A draft standard entitled, ``NIJ Duty Holster Retention Standard for Law Enforcement'' and (2) a draft companion document entitled, ``NIJ Duty Holster Retention Certification Program Requirements.'' The opportunity to provide comments on these two documents is open to industry technical representatives, law enforcement agencies and organizations, research, development and scientific communities, and all other stakeholders and interested parties. Those individuals wishing to obtain and provide comments on the draft documents under consideration are directed to the following Web site: http://www.justnet.org.

Methodology: care of the critically ill and injured during pandemics and disasters: CHEST consensus statement.

Science.gov (United States)

Ornelas, Joe; Dichter, Jeffrey R; Devereaux, Asha V; Kissoon, Niranjan; Livinski, Alicia; Christian, Michael D

2014-10-01

Natural disasters, industrial accidents, terrorism attacks, and pandemics all have the capacity to result in large numbers of critically ill or injured patients. This supplement provides suggestions for all those involved in a disaster or pandemic with multiple critically ill patients, including front-line clinicians, hospital administrators, professional societies, and public health or government officials. The field of disaster medicine does not have the required body of evidence needed to undergo a traditional guideline development process. In result, consensus statement-development methodology was used to capture the highest-caliber expert opinion in a structured, scientific approach. Task Force Executive Committee members identified core topic areas regarding the provision of care to critically ill or injured patients from pandemics or disasters and subsequently assembled an international panel for each identified area. International disaster medicine experts were brought together to identify key questions (in a population, intervention, comparator, outcome [PICO]-based format) within each of the core topic areas. Comprehensive literature searches were then conducted to identify studies upon which evidence-based recommendations could be made. No studies of sufficient quality were identified. Therefore, the panel developed expert opinion-based suggestions that are presented in this supplement using a modified Delphi process. A total of 315 suggestions were drafted across all topic groups. After two rounds of a Delphi consensus-development process, 267 suggestions were chosen by the panel to include in the document and published in a total of 12 manuscripts composing the core chapters of this supplement. Draft manuscripts were prepared by the topic editor and members of the working groups for each of the topics, producing a total of 11 papers. Once the preliminary drafts were received, the Executive Committee (Writing Committee) then met to review, edit, and

The Draft Directive on Consumer Rights: Choices Made and Arguments Used

Directory of Open Access Journals (Sweden)

Willem H. van Boom

2009-11-01

Full Text Available The 2008 proposal for a Directive on Consumer Rights (hereinafter: the Draft aims at reorganizing the acquis of four specific European directives on consumer protection into a more coherent codification of consumer rights. Specifically, it contains rules on precontractual information duties, on withdrawal rights for distance and off-premises contracts, on consumer sales and on general contract terms in consumer contracts. In replacing the four directives with a minimum harmonization character, the Draft marks a further step towards full harmonization of consumer contract law in Europe. This is an unsettling step because the level of protection offered to consumers in the Draft hardly exceeds the level of protection offered by the four directives mentioned earlier. Instead, it diminishes this protection in some regards. In light of all this, the question arises whether the policy choices underlying the Draft are, in fact, convincingly underpinned by solid argumentation. This article addresses this issue by first analyzing the Draft's use of the generic concept of “contracts between consumers and traders”. It is argued that full harmonization of a badly delineated territory is ill-advised. Subsequently, the argumentative power of the policy considerations forwarded by the European Commission in its Regulatory Assessment Study is tested. The article concludes that the Commission’s assessment of expected costs and benefits of the Draft is waver-thin and geared towards persuading the reader of the aptness of choices already made. In some respects, the evidence presented by the Commission is outright unconvincing. At certain points, the Draft even fuels the reader’s suspicion of foregone conclusions. Overall, the need for reduction of the level of protection offered by the current minimum harmonization directives is poorly argued by the Commission and appears, in a number of important ways, not to reflect the socio-economic relationships that

De Minimis waste impacts analysis methodology. IMPACTS - BRC user's guide and methodology for radioactive wastes below regulatory concern. Draft report for comment. Volume 2

International Nuclear Information System (INIS)

Forstom, J.M.; Goode, D.J.

1986-07-01

This report describes the methodology and computer program used by NRC to evaluate radiological impacts associated with petitions to have specific slightly contaminated radioactive waste streams designated as ''below regulatory concern.'' These wastes could be treated and disposed of at facilities which are not licensed for low-level radioactive waste management. The IMPACTS-BRC computer program is implemented on IBM-PC microcomputers using the FORTRAN programming language. Radiological impacts (doses) are estimated for several pathways including direct gamma radiation exposure, worker inhalation and exposure, offsite atmospheric and water releases, and intruder exposures. Annual impacts are calculated for the maximum individual, critical groups, and general population. The treatment and disposal options include onsite incineration, incineration at municipal and hazardous waste facilities, and disposal at sanitary landfills and hazardous waste landfills. Modifications to the program (from Volume 1) are primarily for microcomputer compatibility and to provide information needed to evaluate the petitions. Default environmental and facility parameters are developed representing conservative assumptions about site selection and operational procedures. In particular, the parameters of the groundwater pathway model are modified to represent more conservative assumptions than the original model (Volume 1)

75 FR 59268 - Draft Guidance for Industry: Acidified Foods; Availability

Science.gov (United States)

2010-09-27

... fermented dairy products, such as yogurt, belong to a separate category that is not relevant to the... the draft guidance, processors of non-acidified foods (e.g., some acid foods or fermented foods) who... regulations. Under the draft guidance, processors of acid foods and fermented foods who conclude that such...

Environmental Regulatory Compliance Plan for site: Draft characterization of the Yucca Mountain site:Draft

International Nuclear Information System (INIS)

1988-01-01

The objective of the EMMP is to document compliance with the NWPA. To do so, a summary description of site characterization activites is provided, based on the consultation draft of the SCP. Subsequent chpaters identify those technical areas having the potential to be impacted by site characterization activities and the monitoring plans proposed to identify whether those impacts acutally occur. Should monitoring confirm the potential for significant adverse impact, mitigative measures will be developed. In the context of site characterization, mitigation is defined as those changes in site characterization activities that serve to avoid or minimize, to the maximum extent practicle, any significant adverse environmental impacts. Although site characterization activies involve both surface and subsurface activities, it is the surface-based aspect of site characterization that is addressed in detailed by the EMMP. The schedule and duration of these activities is given in the consultation draft of the SCP. A breif summary of all proposed activities is given in the EMMP. 10 refs., 8 figs

Supplement to the Surplus Plutonium Disposition Draft Environmental Impact Statement

Energy Technology Data Exchange (ETDEWEB)

N/A

1999-05-14

On May 22, 1997, DOE published a Notice of Intent in the Federal Register (62 Federal Register 28009) announcing its decision to prepare an environmental impact statement (EIS) that would tier from the analysis and decisions reached in connection with the ''Storage and Disposition of Weapons-Usable Fissile Materials Final Programmatic EIS (Storage and Disposition PEIS)''. ''The Surplus Plutonium Disposition Draft Environmental Impact Statement'' (SPD Draft EIS) (DOWEIS-0283-D) was prepared in accordance with NEPA and issued in July 1998. It identified the potential environmental impacts of reasonable alternatives for the proposed siting, construction, and operation of three facilities for plutonium disposition. These three facilities would accomplish pit disassembly and conversion, immobilization, and MOX fuel fabrication. For the alternatives that included MOX fuel fabrication, the draft also described the potential environmental impacts of using from three to eight commercial nuclear reactors to irradiate MOX fuel. The potential impacts were based on a generic reactor analysis that used actual reactor data and a range of potential site conditions. In May 1998, DCE initiated a procurement process to obtain MOX fuel fabrication and reactor irradiation services. The request for proposals defined limited activities that may be performed prior to issuance of the SPD EIS Record of Decision (ROD) including non-site-specific work associated with the development of the initial design for the MOX fuel fabrication facility, and plans (paper studies) for outreach, long lead-time procurements, regulatory management, facility quality assurance, safeguards, security, fuel qualification, and deactivation. No construction on the proposed MOX facility would begin before an SPD EIS ROD is issued. In March 1999, DOE awarded a contract to Duke Engineering & Services; COGEMA, Inc.; and Stone & Webster (known as DCS) to provide the requested

Supplement to the Surplus Plutonium Disposition Draft Environmental Impact Statement

International Nuclear Information System (INIS)

1999-01-01

On May 22, 1997, DOE published a Notice of Intent in the Federal Register (62 Federal Register 28009) announcing its decision to prepare an environmental impact statement (EIS) that would tier from the analysis and decisions reached in connection with the ''Storage and Disposition of Weapons-Usable Fissile Materials Final Programmatic EIS (Storage and Disposition PEIS)''. ''The Surplus Plutonium Disposition Draft Environmental Impact Statement'' (SPD Draft EIS) (DOWEIS-0283-D) was prepared in accordance with NEPA and issued in July 1998. It identified the potential environmental impacts of reasonable alternatives for the proposed siting, construction, and operation of three facilities for plutonium disposition. These three facilities would accomplish pit disassembly and conversion, immobilization, and MOX fuel fabrication. For the alternatives that included MOX fuel fabrication, the draft also described the potential environmental impacts of using from three to eight commercial nuclear reactors to irradiate MOX fuel. The potential impacts were based on a generic reactor analysis that used actual reactor data and a range of potential site conditions. In May 1998, DCE initiated a procurement process to obtain MOX fuel fabrication and reactor irradiation services. The request for proposals defined limited activities that may be performed prior to issuance of the SPD EIS Record of Decision (ROD) including non-site-specific work associated with the development of the initial design for the MOX fuel fabrication facility, and plans (paper studies) for outreach, long lead-time procurements, regulatory management, facility quality assurance, safeguards, security, fuel qualification, and deactivation. No construction on the proposed MOX facility would begin before an SPD EIS ROD is issued. In March 1999, DOE awarded a contract to Duke Engineering and Services; COGEMA, Inc.; and Stone and Webster (known as DCS) to provide the requested services. The procurement process

76 FR 63628 - Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR)

Science.gov (United States)

2011-10-13

...] Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) AGENCY: Federal... Individual Assistance Operations Manual (9327.2-PR). DATES: Comments must be received by November 14, 2011... of the draft Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) on...

UPC Scaling-up methodology for Deterministic Safety Assessment and Support to Plant Operation

Energy Technology Data Exchange (ETDEWEB)

Martínez-Quiroga, V.; Reventós, F.; Batet, Il.

2015-07-01

Best Estimate codes along with necessary nodalizations are widely used tools in nuclear engineering for both Deterministic Safety Assessment (DSA) and Support to Plant Operation and Control. In this framework, the application of quality assurance procedures in both codes and nodalizations becomes an essential step prior any significant study. Along these lines the present paper introduces the UPC SCUP, a systematic methodology based on the extrapolation of the Integral Test Facilities (ITF) post-test simulations by means of scaling analyses. In that sense, SCUP fulfills a gap in current nodalization qualification procedures, the related with the validation of NPP nodalizations for Design Basis Accidents conditions. Three are the pillars that support SCUP: judicial selection of the experimental transients, full confidence in the quality of the ITF simulations, and simplicity in justifying discrepancies that appear between ITF and NPP counterpart transients. The techniques that are presented include the socalled Kv scaled calculations as well as the use of two new approaches, ”Hybrid nodalizations” and ”Scaled-up nodalizations”. These last two methods have revealed themselves to be very helpful in producing the required qualification and in promoting further improvements in nodalization. The study of both LSTF and PKL counterpart tests have allowed to qualify the methodology by the comparison with experimental data. Post-test simulations at different sizes allowed to define which phenomena could be well reproduced by system codes and which not, in this way also establishing the basis for the extrapolation to an NPP scaled calculation. Furthermore, the application of the UPC SCUP methodology demonstrated that selected phenomena can be scaled-up and explained between counterpart simulations by carefully considering the differences in scale and design. (Author)

12 CFR 516.20 - What information must I include in my draft business plan?

Science.gov (United States)

2010-01-01

... business plan? 516.20 Section 516.20 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE... What information must I include in my draft business plan? If you must submit a draft business plan... described in the savings association's draft business plan; and (d) Demonstrate how applicable requirements...

Regional Shelter Analysis Methodology

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dennison, Deborah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Miller, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-08-01

The fallout from a nuclear explosion has the potential to injure or kill 100,000 or more people through exposure to external gamma (fallout) radiation. Existing buildings can reduce radiation exposure by placing material between fallout particles and exposed people. Lawrence Livermore National Laboratory was tasked with developing an operationally feasible methodology that could improve fallout casualty estimates. The methodology, called a Regional Shelter Analysis, combines the fallout protection that existing buildings provide civilian populations with the distribution of people in various locations. The Regional Shelter Analysis method allows the consideration of (a) multiple building types and locations within buildings, (b) country specific estimates, (c) population posture (e.g., unwarned vs. minimally warned), and (d) the time of day (e.g., night vs. day). The protection estimates can be combined with fallout predictions (or measurements) to (a) provide a more accurate assessment of exposure and injury and (b) evaluate the effectiveness of various casualty mitigation strategies. This report describes the Regional Shelter Analysis methodology, highlights key operational aspects (including demonstrating that the methodology is compatible with current tools), illustrates how to implement the methodology, and provides suggestions for future work.

78 FR 44117 - Notice of a Public Comment Period on the Draft IRIS Carcinogenicity Assessment for Ethylene Oxide

Science.gov (United States)

2013-07-23

... Public Comment Period on the Draft IRIS Carcinogenicity Assessment for Ethylene Oxide AGENCY... Carcinogenicity of Ethylene Oxide'' (EPA/635/R-13/128a) and on the draft peer review charge questions. The draft... on the draft Evaluation of the Inhalation Carcinogenicity of Ethylene Oxide and on the draft peer...

75 FR 63188 - Draft Guidance for Industry: Early Clinical Trials With Live Biotherapeutic Products: Chemistry...

Science.gov (United States)

2010-10-14

...] Draft Guidance for Industry: Early Clinical Trials With Live Biotherapeutic Products: Chemistry...: Chemistry, Manufacturing, and Control Information'' dated September 2010. The draft guidance provides... Products: Chemistry, Manufacturing, and Control Information'' dated September 2010. The draft guidance...

78 FR 17653 - Upper Great Plains Wind Energy Draft Programmatic Environmental Impact Statement (DOE/EIS-0408)

Science.gov (United States)

2013-03-22

... Wildlife Service Upper Great Plains Wind Energy Draft Programmatic Environmental Impact Statement (DOE/EIS... Plains Wind Energy Draft Programmatic Environmental Impact Statement (Draft [[Page 17654

A novel scenario of aperiodical impacts appearance in the turbine draft tube

Science.gov (United States)

Alekseenko, S. V.; Kuibin, P. A.; Shtork, S. I.; Skripkin, S. G.; Sonin, V. I.; Tsoy, M. A.; Ustimenko, A. S.

2016-11-01

The swirling flow in the discharge cone of hydroturbine is characterized by various self-induced instabilities and associated low frequency phenomena when the turbine is operated far from the best efficiency point. In particular, the precessing vortex rope develops at part-load regimes in the draft tube. This rope can serve a reason of the periodical low- frequency pressure oscillations in the whole hydrodynamical system. During the experimental research of flow structure in the discharge cone in a regime of free runner new interesting phenomenon was discovered. Due to instability some coils of helical vortex close to each other and reconnection appears with generation of a vortex ring. The experiments were fulfilled at the cavitational conditions when a cavity arises in the vortex core. So the phenomenon was registered with help of visualization by the high speed video recording. The vortex ring after the reconnection moves apart from the main vortex rope toward the wall and downstream. When it reaches the area with high pressure the cavity collapses with generation of pressure impact. The mechanism of cavitational vortex rings generation and their further collapse can serve as a prototype of the aperiodical pressure impacts inside the turbine draft tube.

LDA measurements in the Francis-99 draft tube cone

International Nuclear Information System (INIS)

Sundstrom, L R J; Amiri, K; Cervantes, M J; Bergan, C; Dahlhaug, O G

2014-01-01

Velocity measurements were performed in the draft tube cone of a 1:5.1 scaled model of the Tokke hydropower plant, Norway; also known as the Francis-99 model. Results from the laser Doppler anemometry measurements undertaken at three operating points will be used as validation data for an upcoming workshop on the state of the art of Francis turbine numerical simulation. With the turbine operating at the best efficiency point, a sensitivity analysis of the flow parameters head, flow rate and runner rotational speed shows that the effects on the dimensionless velocity profiles are small as long as n ED and Q ED are held constant. The results indicate a well-functioning turbine at the best efficiency point and high load. At the part load operating point, a vortex breakdown occurs which distorts the velocity profiles and significantly lowers the turbine's hydraulic efficiency. Frequency spectrums of each LDA signal at part load reveals a peak which is asynchronous to that of the runner angular speed. The peaks might be related to the precession of a rotating vortex rope but the characteristics of the LDA signals are different compared to previous studies involving rotating vortex ropes

Application of Response Surface Methodology (RSM for Optimization of Operating Parameters and Performance Evaluation of Cooling Tower Cold Water Temperature

Directory of Open Access Journals (Sweden)

Ramkumar RAMAKRISHNAN

2012-01-01

Full Text Available The performance of a cooling tower was analyzed with various operating parameters tofind the minimum cold water temperature. In this study, optimization of operating parameters wasinvestigated. An experimental design was carried out based on central composite design (CCD withresponse surface methodology (RSM. This paper presents optimum operating parameters and theminimum cold water temperature using the RSM method. The RSM was used to evaluate the effectsof operating variables and their interaction towards the attainment of their optimum conditions.Based on the analysis, air flow, hot water temperature and packing height were high significanteffect on cold water temperature. The optimum operating parameters were predicted using the RSMmethod and confirmed through experiment.

Level 1 and 2 PSA methodology taking into account new design, operating and safety factors. Rev. 1

International Nuclear Information System (INIS)

Jirsa, P.; Patrik, M.

2000-11-01

The status of probabilistic safety assessment (PSA) is discussed (i) in relation to the expected nature of 'revolutionary' innovations and (ii) in the light of the EUR document, summarizing requirements put by European NPP operators on the future NPP design. The aims included: (1) analysis of limitations to the current PSA methodology; (2) specification of physical and operation processes the knowledge of which is necessary to ensure the safety criteria of advanced reactors; (3) summarisation of existing knowledge and description formats of the processes; (4) identification of theoretical and experimental work required to address the problem, preparation of data and computer codes, ensuring traceability to EU developmental programs. (P.A.)

A Methodology for Evaluation of Inservice Test Intervals for Pumps and Motor-Operated Valves

International Nuclear Information System (INIS)

Cox, D.F.; Haynes, H.D.; McElhaney, K.L.; Otaduy, P.J.; Staunton, R.H.; Vesely, W.E.

1999-01-01

Recent nuclear industry reevaluation of component inservice testing (IST) requirements is resulting in requests for IST interval extensions and changes to traditional IST programs. To evaluate these requests, long-term component performance and the methods for mitigating degradation need to be understood. Determining the appropriate IST intervals, along with component testing, monitoring, trending, and maintenance effects, has become necessary. This study provides guidelines to support the evaluation of IST intervals for pumps and motor-operated valves (MOVs). It presents specific engineering information pertinent to the performance and monitoring/testing of pumps and MOVs, provides an analytical methodology for assessing the bounding effects of aging on component margin behavior, and identifies basic elements of an overall program to help ensure component operability. Guidance for assessing probabilistic methods and the risk importance and safety consequences of the performance of pumps and MOVs has not been specifically included within the scope of this report, but these elements may be included in licensee change requests

Automatic drafting system for lined tanks used for nuclear power plants

International Nuclear Information System (INIS)

Sasaki, Ryoichi; Kikuchi, Nobuo

1981-01-01

The concrete vessels lined with metallic sheets are used widely in chemical and food industries and nuclear power plants. Especially in nuclear power plants, rectangular lined tanks have been adopted mainly to store radioactive liquid and solid wastes recently, because of the good volume efficiency. Though the basic structure of the lined tanks is the same, the volume and the form change according to the kinds of stored matters and the positions of pipe connections, and the form of individual lining sheets diversifies. As much labor and time are consumed for the drawing, automatic drafting was planned, and the conditions of application were studied. As for the conditions of application, the following metters are conceivable: the standardized method of design of equipments, the handling of figures numerically or by mathematical formulas, troublesome calculation, the works likely to cause mistake, many drawings for production and so on. The lined tanks almost satisfy these conditions, therefore the automatic drafting was promoted, and good results were obtained. the range of application of the automatic drafting system, the standardization of the form of lined tanks, the size of lining sheets, part number and welding number, the composition of the automatic drafting system, the outline of the program, and the effectiveness of automatic drafting are described. (Kako, I.)

Nuclear EMP: ingredients of an EMP protection engineering methodology

International Nuclear Information System (INIS)

Latorre, V.R.; Spogen, L.R. Jr.

1977-02-01

A fundamental methodology of electromagnetic pulse (EMP) protection engineering is described. Operations performed within the framework of this methodology are discussed. These operations, along with problem constraints and data, constitute the essential ingredients needed to implement the overall engineering methodology. Basic definitions and descriptions of these essential ingredients are provided. The issues discussed represent the first step in developing a methodology for protecting systems against EMP effects

76 FR 10908 - Draft Guidance for Industry on Medication Guides-Distribution Requirements and Inclusion of...

Science.gov (United States)

2011-02-28

...] Draft Guidance for Industry on Medication Guides--Distribution Requirements and Inclusion of Medication... a draft guidance for industry entitled ``Medication Guides--Distribution Requirements and Inclusion... Inclusion of Medication Guides in Risk Evaluation and Mitigation Strategies (REMS).'' This draft guidance is...

Numerical and Experimental Study on a Model Draft Tube with Vortex Generators

Directory of Open Access Journals (Sweden)

Tian Xiaoqing

2013-01-01

Full Text Available A model water turbine draft tube containing vortex generators (VG was studied. Numerical simulations were performed to investigate 55 design variations of the vortex generators in a draft tube. After analyzing the shapes of streamlines and velocity distributions in the tube and comparing static pressure recovery coefficients (SPRC in different design variations, an optimum vortex generator layout, which can raise SPRC of the draft tube by 4.8 percent, was found. To verify the effectiveness of the vortex generator application, a series of experiments were carried out. The results show that by choosing optimal vortex generator parameters, such as the installation type, installation position, blade-to-blade distance, and blade inclination angle, the draft tube equipped vortex generators can effectively raise their SPRC andworking stability.

[Review comments on the Draft DOE Area Recommendation Report for the Crystalline Repository Project]: Final technical report

International Nuclear Information System (INIS)

Dutch, S.I.; Stiegliltz, R.D.

1986-03-01

Research performed under the grant primarily involved review and comment on the Draft Area Recommendations Report (DARR). However, because data and ''recommendations'' included in the DARR are unquestionably tied to years of research and dozens of technical reports and documents, i.e., Screening Methodologies, Regional characterization Reports, etc., it is essential that consultants to the Menominee Tribe review all the relevant DOE documents, working papers, etc. Given the short period provided for technical comment and limited funds available to the Tribe, a well designed and thorough technical review was (and is) without question impossible. What review and comment that did occur on a geotechnical level is included in this report

Three draft genomes of Vibrio coralliilyticus strains isolated from bivalve hatcheries

Science.gov (United States)

Reported here are the draft genomes of three Vibrio coralliilyticus isolates RE87, AIC-7, and 080116A. Each strain was isolated in association with diseased oyster larvae in commercial aquaculture systems. These draft genomes will be useful for further studies in understanding the genomic features...

Traditional Engineering Graphics versus Computer-Aided Drafting: A View from Academe.

Science.gov (United States)

Foster, Robert J.

1987-01-01

Argues for a legitimate role of manually expressed engineering graphics within engineering education as a needed support for computer-assisted drafting work. Discusses what and how students should learn as well as trends in engineering graphics education. Compares and contrasts manual and computer drafting methods. (CW)

77 FR 22247 - Veterinary Feed Directive; Draft Text for Proposed Regulation

Science.gov (United States)

2012-04-13

.... FDA-2010-N-0155] Veterinary Feed Directive; Draft Text for Proposed Regulation AGENCY: Food and Drug... the efficiency of FDA's Veterinary Feed Directive (VFD) program. The Agency is making this draft text..., rm. 1061, Rockville, MD 20852. FOR FURTHER INFORMATION CONTACT: Sharon Benz, Center for Veterinary...

Methodology for selection of attributes and operating conditions for SVM-Based fault locator's

Directory of Open Access Journals (Sweden)

Debbie Johan Arredondo Arteaga

2017-01-01

Full Text Available Context: Energy distribution companies must employ strategies to meet their timely and high quality service, and fault-locating techniques represent and agile alternative for restoring the electric service in the power distribution due to the size of distribution services (generally large and the usual interruptions in the service. However, these techniques are not robust enough and present some limitations in both computational cost and the mathematical description of the models they use. Method: This paper performs an analysis based on a Support Vector Machine for the evaluation of the proper conditions to adjust and validate a fault locator for distribution systems; so that it is possible to determine the minimum number of operating conditions that allow to achieve a good performance with a low computational effort. Results: We tested the proposed methodology in a prototypical distribution circuit, located in a rural area of Colombia. This circuit has a voltage of 34.5 KV and is subdivided in 20 zones. Additionally, the characteristics of the circuit allowed us to obtain a database of 630.000 records of single-phase faults and different operating conditions. As a result, we could determine that the locator showed a performance above 98% with 200 suitable selected operating conditions. Conclusions: It is possible to improve the performance of fault locators based on Support Vector Machine. Specifically, these improvements are achieved by properly selecting optimal operating conditions and attributes, since they directly affect the performance in terms of efficiency and the computational cost.

76 FR 51034 - Availability of Draft NTP Monograph on Potential Developmental Effects of Cancer Chemotherapy...

Science.gov (United States)

2011-08-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Availability of Draft NTP Monograph on Potential... Meeting To Peer Review Draft Monograph AGENCY: Division of the National Toxicology Program (DNTP...: Availability of Draft Monograph; Request for Comments; Announcement of a Peer Review Panel Meeting. SUMMARY...

BIM and architectural heritage: towards an operational methodology for the knowledge and the management of Cultural Heritage

Directory of Open Access Journals (Sweden)

Laura Inzerillo

2016-06-01

Full Text Available The study aims to answer the growing need for virtuously organize informational apparatuses related to Cultural Heritage. We propose a methodology that integrates multidisciplinary processes of interaction with information aimed at survey, documentation, management, knowledge and enhancement of historic artifacts.It is needed to review and update the procedure of instrumental data acquisition, standardization and structuring of the acquired data in a three-dimensional semantic model as well as the subsequent representability and accessibility of the model and the related database. If the use of Building Information Modeling has in recent years seen a consolidation in the procedures and the identification of standard methods in design process, nevertheless in the field of architectural heritage, the challenge to identify operational methodologies for the conservation, management and process enhancement is still open.

76 FR 22721 - Notice of Availability of Draft Resource Management Plans and Associated Environmental Impact...

Science.gov (United States)

2011-04-22

...] Notice of Availability of Draft Resource Management Plans and Associated Environmental Impact Statement for the Bighorn Basin Resource Management Plan Revision Project, Cody and Worland Field Offices... Draft Resource Management Plan (RMP) for the Cody Field Office, a Draft RMP for the Worland Field Office...

Preliminary application of the draft code case for alloy 617 for a high temperature component

International Nuclear Information System (INIS)

Lee, Hyeong Yeon; Kim, Yong Wan; Song, Kee Nam

2008-01-01

The ASME draft Code Case for Alloy 617 was developed in the late 1980s for the design of very-high-temperature gas cooled reactors. The draft Code Case was patterned after the ASME Code Section III Subsection NH and was intended to cover Ni-Cr-Co-Mo Alloy 617 to 982 .deg. C (1800 .deg. F). But the draft Code Case is still in an incomplete status, lacking necessary material properties and design data. In this study, a preliminary evaluation on the creep-fatigue damage for a high temperature hot duct pipe structure has been carried out according to the draft Code Case. The evaluation procedures and results according to the draft Code Case for Alloy 617 material were compared with those of the ASME Subsection NH and RCC-MR for Alloy 800H material. It was shown that many data including material properties, fatigue and creep data should be supplemented for the draft Code Case. However, when the evaluation results on the creep-fatigue damage according to the draft Code Case, ASME-NH and RCC-MR were compared based on the preliminary evaluation, it was shown that the Alloy 617 results from the draft Code Case tended to be more resistant to the creep damage while less resistant to the fatigue damage than those from the ASME-NH and RCC-MR

A multiattribute utility analysis of sites nominated for characterization for the first radioactive-waste repository: A decision-aiding methodology

Energy Technology Data Exchange (ETDEWEB)

none,

1986-05-01

In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization, three simple quantitative methods were used to aggregate the rankings assigned to each site for the various technical guidelines. In response to numerous comments on the methods, the DOE has undertaken a formal application of one of them (hereafter referred to as the decision-aiding methodology) for the purpose of obtaining a more rigorous evaluation of the nominated sites. The application of the revised methodology is described in this report. The method of analysis is known as multiattribute utility analysis; it is a tool for providing insights as to which sites are preferable and why. The decision-aiding methodology accounts for all the fundamental considerations specified by the siting guidelines and uses as source information the data and evaluations reported or referenced in the EAs. It explicitly addresses the uncertainties and value judgments that are part of all siting problems. Furthermore, all scientific and value judgments are made explicit for the reviewer. An independent review of the application of the decision-aiding methodology has been conducted by the Board on Radioactive Waste Management of the National Academy of Sciences; the comments of the Board are included as an appendix to this report.

A multiattribute utility analysis of sites nominated for characterization for the first radioactive-waste repository: A decision-aiding methodology

International Nuclear Information System (INIS)

1986-05-01

In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization, three simple quantitative methods were used to aggregate the rankings assigned to each site for the various technical guidelines. In response to numerous comments on the methods, the DOE has undertaken a formal application of one of them (hereafter referred to as the decision-aiding methodology) for the purpose of obtaining a more rigorous evaluation of the nominated sites. The application of the revised methodology is described in this report. The method of analysis is known as multiattribute utility analysis; it is a tool for providing insights as to which sites are preferable and why. The decision-aiding methodology accounts for all the fundamental considerations specified by the siting guidelines and uses as source information the data and evaluations reported or referenced in the EAs. It explicitly addresses the uncertainties and value judgments that are part of all siting problems. Furthermore, all scientific and value judgments are made explicit for the reviewer. An independent review of the application of the decision-aiding methodology has been conducted by the Board on Radioactive Waste Management of the National Academy of Sciences; the comments of the Board are included as an appendix to this report

78 FR 49318 - Availability of Draft Advisory Circular (AC) 90-106A and AC 20-167A

Science.gov (United States)

2013-08-13

...] Availability of Draft Advisory Circular (AC) 90-106A and AC 20- 167A AGENCY: Federal Aviation Administration... of draft Advisory Circular (AC) 90-106A, Enhanced Flight Vision Systems and draft AC 20- 167A... Federal holidays. FOR FURTHER INFORMATION CONTACT: For technical questions concerning draft AC 90-106A...

Accuracy limitations for low velocity measurements and draft assessment in rooms

DEFF Research Database (Denmark)

Melikov, Arsen Krikor; Popiolek, Zbigniew J.; Silva, M.G.

2007-01-01

must be known in order to perform reliable assessment and validation. At present, a low-velocity thermal anemometer (LVTA) with an omnidirectional (spherical) sensor is most often used in practice for measuring air speed due to its low price and easy and convenient operation. The accuracy of the speed......, the definition of realistic requirements in thermal comfort standards as well as validation of CFD predictions is made possible.......The measurement of air temperature, mean air speed, and turbulence intensity is required in order to assess air distribution and draft discomfort in ventilated rooms. The measurements are also used for validation of computational fluid dynamics (CFD) predictions. The uncertainty of the measurements...

Re: “Comments on draft rules for granting Foreign Tax Credit”

NARCIS (Netherlands)

Sanghavi, Dhruv

2016-01-01

This letter to the Indian Ministry of Finance critically reviews the proposed rules for the grant of credit in India for taxes paid in a foreign country (Draft Rules). It points out what is perhaps the most egregious drawback in the Draft Rules - they do not consider the erosive impact foreign

Heat transfer enhancement in a natural draft dry cooling tower under crosswind operation with heterogeneous water distribution

Energy Technology Data Exchange (ETDEWEB)

Goodarzi, Mohsen; Amooie, Hossein [Bu-Ali Sina Univ., Hamedan (Iran, Islamic Republic of). Dept. of Mechanical Engineering

2016-04-15

Crosswind significantly decreases cooling efficiency of a natural draft dry cooling tower. The possibility of improving cooling efficiency with heterogeneous water distribution within the cooling tower radiators under crosswind condition is analysed. A CFD approach was used to model the flow field and heat transfer phenomena within the cooling tower and airflow surrounding the cooling tower. A mathematical model was developed from various CFD results. Having used a trained Genetic Algorithm with the result of mathematical model, the best water distribution was found among the others. Remodeling the best water distribution with the CFD approach showed that the highest enhancement of the heat transfer compared to the usual uniform water distribution.

Heat transfer enhancement in a natural draft dry cooling tower under crosswind operation with heterogeneous water distribution

International Nuclear Information System (INIS)

Goodarzi, Mohsen; Amooie, Hossein

2016-01-01

Crosswind significantly decreases cooling efficiency of a natural draft dry cooling tower. The possibility of improving cooling efficiency with heterogeneous water distribution within the cooling tower radiators under crosswind condition is analysed. A CFD approach was used to model the flow field and heat transfer phenomena within the cooling tower and airflow surrounding the cooling tower. A mathematical model was developed from various CFD results. Having used a trained Genetic Algorithm with the result of mathematical model, the best water distribution was found among the others. Remodeling the best water distribution with the CFD approach showed that the highest enhancement of the heat transfer compared to the usual uniform water distribution.

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (Public Comment Draft)

Science.gov (United States)

In September 2016, the U.S. Environmental Protection Agency's (USEPA) released the draft Integrated Risk Information System (IRIS) Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE). Consistent with the 2013 IRIS Enhancements, draft IRIS assessments are released prior to e...

AGILE DRAFTING OF OUTSOURCING CONTRACTS

DEFF Research Database (Denmark)

Schlichter, Bjarne Rerup; Storgaard, Kristian

2015-01-01

and in several parallel tracks using different competencies. By the use of an illustrative case-study, this paper explores how scrum can be applied to enhance the process of drafting outsourcing contracts. The analysis indicates that the use of an agile method, such as Scrum, can be beneficial in this context...

Shape optimization of draft tubes for Agnew microhydro turbines

International Nuclear Information System (INIS)

Shojaeefard, Mohammad Hasan; Mirzaei, Ammar; Babaei, Ali

2014-01-01

Highlights: • The draft tube of Agnew microhydro turbine was optimized. • Pareto optimal solutions were determined by neural networks and NSGA-II algorithm. • The pressure recovery factor increases with height and angle over design ranges. • The loss coefficient reaches the minimum values at angles about 2 o . • Swirl of the incoming flow has great influence on the optimization results. - Abstract: In this study, the shape optimization of draft tubes utilized in Agnew type microhydro turbines has been discussed. The design parameters of the draft tube such as the cone angle and the height above the tailrace are considered in defining an optimization problem whose goal is to maximize the pressure recovery factor and minimize the energy loss coefficient of flow. The design space is determined by considering the experimental constraints and parameterized by the method of face-centered uniform ascertain distribution. The numerical simulations are performed using the boundary conditions found from laboratory tests and the obtained results are analyzed to create and validate a feed-forward neural network model, which is implemented as a surrogate model. The optimal Pareto solutions are finally determined using the NSGA-II evolutionary algorithm and compared for different inlet conditions. The results predict that the high swirl of the incoming flow drastically reduces the performance of the draft tube

First Draft of the Research Agenda

DEFF Research Database (Denmark)

Dahl, Hanne Marlene; Pieper, Michael; Fahnøe, Kristian

This report is a draft of a research agenda that the consortium INNOSERV has provided to the European Commission. It is the result of the work of researchers and insights provided by users, practitioners, experts and policy-makers involving around 20 examples of innovative practices from different...... and provide one of several sources of input from social platforms for HORISON 2020. INNOSERV is a social platform consisting of experts from various EU countries and key stakeholders and is itself an innovation in how researchers work together with representatives from various parts of society, thereby...... ensuring the relevance of the suggested draft of a research agenda. The seven themes identified are: User-centeredness innovation in social services, Innovation in institutional development, Framing of social services in relation to innovation, The governance of innovation, Influence of regional and local...

Draft Animal Power at the Office of Niger in Mali. From State Management to State Disengagement

Directory of Open Access Journals (Sweden)

H. Kassambara

2004-03-01

Full Text Available In the early 1930s, the Office of Niger started its farming operations with the use of cattle power. In 1949 began large scale mechanization, which ended in failure ten years later. Since then, draft animal power has become again the major energy source for soil labor and transportation. Until the early 1980s, the production systems were based on extensive techniques that led to average paddy yields that rarely reached beyond two tons per hectare. Starting in 1982, a new dynamic emerged from Office of Niger activities. Draft animal power was developed thanks to an easier access to credit, betteradapted made-on-site equipment, and adequate veterinary services. Average paddy yields reached four to six tons per hectare, depending on the service provided. After the 1994 Office of Niger restructuration, the animal husbandry division was cut out as a result of veterinary services privatization. Manufacturing of implements as well as maintenance are now performed by a blacksmiths’ network. Peasants are financially responsible for supplying farm equipment and draft animals. Following the heavy debt of farmers’ associations, credit facilities for implements and oxen were stopped, increasing thus the difficulty to get access to animal traction. Bad feed and health conditions of cattle at the beginning of the crop year result in delays in the application of the farmwork calendar. To remedy this situation, the URDOC project developed and tested a series of measures aimed at improving the welfare of draft animals. The results are available in the form of technical notes and teaching modules, which are circulated within the framework of “support/advice at the family farm level”. The success of these measures will depend on the engagement of the various actors to provide support/advice and veterinary services, as well as to revive manufacturing, maintenance and credit for animal traction implements.

77 FR 46986 - Revisions to Electric Quarterly Report Filing Process; Availability of Draft XML Schema

Science.gov (United States)

2012-08-07

... Supplementary Information Section below for details. DATES: The draft XML Schema is now available at the links...] Revisions to Electric Quarterly Report Filing Process; Availability of Draft XML Schema AGENCY: Federal... Regulatory Commission is making available on its Web site ( http://www.ferc.gov ) a draft of the XML schema...

Decision-making methodology for management of hazardous waste

International Nuclear Information System (INIS)

Philbin, J.S.; Cranwell, R.M.

1988-01-01

A decision-making methodology is presented that combines systems and risk analysis techniques to evaluate hazardous waste management practices associated with DOE weapon production operations. The methodology provides a systematic approach to examining waste generation and waste handling practices in addition to the more visible disposal practices. Release-exposure scenarios for hazardous waste operations are identified and operational risk is determined. Comparisons may be made between existing and alternative waste management practices (and processes) on the basis of overall risk, cost and compliance with regulations. Managers can use this methodology to make and defend resource allocation decisions and to prioritize research needs

75 FR 49913 - Draft Guidance, “Federal Greenhouse Gas Accounting and Reporting”

Science.gov (United States)

2010-08-16

... provides this draft guidance for public review and comment to ensure accessibility of Federal accounting... COUNCIL ON ENVIRONMENTAL QUALITY Draft Guidance, ``Federal Greenhouse Gas Accounting and Reporting... recommended Federal GHG reporting and accounting procedures. On April 5, 2010, DOE-FEMP submitted the final...

76 FR 55941 - Notice of Availability of the Draft Bakersfield Resource Management Plan and Draft Environmental...

Science.gov (United States)

2011-09-09

... a telecommunications device for the deaf (TDD) may call the Federal Information Relay Service (FIRS... development and other land use authorizations with resource values; and (6) climate change. The Draft RMP... authorizations, livestock grazing, mineral development and recreation. Bitter Creek (6,121 acres): This newly...

75 FR 78980 - Notice of Availability of the Draft Programmatic Environmental Impact Statement for Solar Energy...

Science.gov (United States)

2010-12-17

...] Notice of Availability of the Draft Programmatic Environmental Impact Statement for Solar Energy... Draft Programmatic Environmental Impact Statement (EIS) for Solar Energy Development in Six Southwestern... preferred method of commenting. Mail: Addressed to: Solar Energy Draft Programmatic EIS, Argonne National...

77 FR 56909 - Notice of Comment Period Extension for the Revised Draft Environmental Impact Report/Supplemental...

Science.gov (United States)

2012-09-14

... for the Revised Draft Environmental Impact Report/Supplemental Draft Environmental Impact Statement... Supplemental Draft Environmental Impact Statement (EIS) for the Fresno to Bakersfield Section of the California... this decision to be responsive to stakeholder requests and to encourage comprehensive public...

Yakima Fisheries Project : Revised Draft Environmental Impact Statement.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1995-05-01

BPA proposes to fund several fishery-related activities in the Yakima River Basin. The Yakima Fisheries Project (YFP), included in the Northwest Power Planning Council`s fish and wildlife program, would be jointly managed by the State of Washington and the Yakima Indian Nation. Fisheries resources in the Yakima River are severely reduced from historical levels and there is a significant potential for enhancement of these resources. BPA`s proposed action is to fund (1) information gathering on the implementation of supplementation techniques and on feasibility of reintroducing coho salmon in an environment where native populations have become extinct; (2) research activities based on continuous assessment, feedback and improvement of research design and activities ({open_quotes}adaptive management{close_quotes}); and (3) the construction, operation, and maintenance of facilities for supplementing populations of upper Yakima spring chinook salmon. The project has been considerably revised from the original proposal described in the first draft EIS. Examined in addition to No Action (which would leave present anadromous fisheries resources unchanged in the, Basin) are two alternatives for action: (1) supplementation of depressed natural populations of upper Yakima spring chinook and (2) that same supplementation plus a study to determine the feasibility of re-establishing (via stock imported from another basin) naturally spawning population and a significant fall fishery for coho in the Yakima Basin. Alternative 2 has been identified as the preferred action. Major issues examined in the Revised Draft EIS include potential impacts of the project on genetic and ecological resources of existing fish populations, on water quality and quantity, on threatened and endangered species listed under the Endangered Species Act, and on the recreational fishery.

Draft Genome Sequences of 12 Dry-Heat-Resistant Bacillus Strains Isolated from the Cleanrooms Where the Viking Spacecraft Were Assembled.

Science.gov (United States)

Seuylemezian, Arman; Cooper, Kerry; Schubert, Wayne; Vaishampayan, Parag

2018-03-22

Spore-forming microorganisms are of concern for forward contamination because they can survive harsh interplanetary travel. Here, we report the draft genome sequences of 12 spore-forming strains isolated from the Manned Spacecraft Operations Building (MSOB) and the Vehicle Assembly Building (VAB) in Cape Canaveral, FL, where the Viking spacecraft were assembled. Copyright © 2018 Seuylemezian et al.

Overtopping hazards to port activities: Application of a new methodology to risk management (POrt Risk MAnagement Tool)

International Nuclear Information System (INIS)

Alises, Ana; Molina, Rafael; Gómez, Rebeca; Pery, Pascual; Castillo, Carmen

2014-01-01

In the past 20 years, the need of ports to serve a fleet whose dimensions are continuously increasing due to economies of scale, has derived on a port infrastructures growth with a trend to look for greater drafts at deeper waters and therefore the protection structures built in the last years have been increasingly exposed to severer maritime climate action. Consequently, overtopping phenomenon has been identified as a potential risk factor able to cause structural damages and operative failure modes to vulnerable economic activities located at these port facilities. Port activities must be developed ensuring operative and safety conditions what imply reducing uncertainties of overtopping phenomena by using prediction methods which may allow overtopping risk management. This paper provides a risk assessment methodology which is integrated into an overtopping risk management framework to cope with safety problems in port exploitation. Overtopping risk value is measured by combining probability of occurrence of an undesirable event together with its consequences, estimated in terms of costs or delays and given in base of the vulnerability of the affected port system. The development of this methodology is described and finally applied to a real case study what seems to reinforce the validity of the proposed method to overtopping risk assessment. - Highlights: • Infrastructure risk assessment involves both probabilistic and economic techniques. • Risk equation is posed by the combination of probability, vulnerability and cost. • Port infrastructures' vulnerability level depends on climate agents' action. • Economic value of natural hazards consequences is linked with vulnerability level. • Project planning process should be done taking into account the project's risk distribution

Views from the japanese nuclear industry and radiation protection professionals on the draft ICRP recommendations

International Nuclear Information System (INIS)

Yonekura, Y.; Choi, H.S.; Muto, S.; Oda, K.; Ishiguchi, T.

2007-01-01

The views of the Japanese nuclear industry, radiation protection professionals, and medical professionals on the concepts of the draft recommendations were presented. Specific concerns and suggestions were expressed in each of these fields based on practical considerations and experiences in operational radiation protection. It was noted that there is no need to complicate the current system, in particular without effectively expressed and rational reasoning. However, in general, speakers and participants in these discussions showed an understanding of ICRP publications. (authors)

76 FR 7817 - Announcing Draft Federal Information Processing Standard 180-4, Secure Hash Standard, and Request...

Science.gov (United States)

2011-02-11

...-02] Announcing Draft Federal Information Processing Standard 180-4, Secure Hash Standard, and Request... and request for comments. SUMMARY: This notice announces the Draft Federal Information Processing..., Information Technology Laboratory, Attention: Comments on Draft FIPS 180-4, 100 Bureau Drive--Stop 8930...

Extensive error in the number of genes inferred from draft genome assemblies.

Directory of Open Access Journals (Sweden)

James F Denton

2014-12-01

Full Text Available Current sequencing methods produce large amounts of data, but genome assemblies based on these data are often woefully incomplete. These incomplete and error-filled assemblies result in many annotation errors, especially in the number of genes present in a genome. In this paper we investigate the magnitude of the problem, both in terms of total gene number and the number of copies of genes in specific families. To do this, we compare multiple draft assemblies against higher-quality versions of the same genomes, using several new assemblies of the chicken genome based on both traditional and next-generation sequencing technologies, as well as published draft assemblies of chimpanzee. We find that upwards of 40% of all gene families are inferred to have the wrong number of genes in draft assemblies, and that these incorrect assemblies both add and subtract genes. Using simulated genome assemblies of Drosophila melanogaster, we find that the major cause of increased gene numbers in draft genomes is the fragmentation of genes onto multiple individual contigs. Finally, we demonstrate the usefulness of RNA-Seq in improving the gene annotation of draft assemblies, largely by connecting genes that have been fragmented in the assembly process.

48 CFR 28.204-2 - Certified or cashiers checks, bank drafts, money orders, or currency.

Science.gov (United States)

2010-10-01

... checks, bank drafts, money orders, or currency. 28.204-2 Section 28.204-2 Federal Acquisition Regulations... Other Security for Bonds 28.204-2 Certified or cashiers checks, bank drafts, money orders, or currency... draft, Post Office money order, or currency, in an amount equal to the penal sum of the bond, instead of...

An annotated outline for a traffic management center operations manual

Science.gov (United States)

2000-10-01

This draft Traffic Management Center (TMC) and Operations manual outline is meant to serve as a model "checklist" for the development of similar manuals used in deployed environments. The purpose of this outline is to provide a reference for agencies...

Assessment guide for tornado effect on Nuclear Power Plants (draft) with its commentaries

International Nuclear Information System (INIS)

Inoue, Hiroto; Fukunishi, Shiro; Suzuki, Tetsuo

2013-10-01

In the context of a severe accident at the Fukushima Daiichi Nuclear Power Station (NPS) operated by the Tokyo Electric Power Company (TEPCO) due to the 2011 off the Pacific coast of Tohoku Earthquake and Tsunami, Nuclear Regulation Authority (NRA) was established on September 19, 2012 under the relevant law. After that NRA organized a task force for studying new regulatory standards for nuclear power plants (NPPs) in consideration of lessons learned from the severe accident at Fukushima. In the task force open meeting, through discussing about design basis external natural events which should be considered in the new regulatory standards, tornado was newly introduced into new regulatory standards as an external natural event. Based on the decision that tornado was newly introduced into new regulatory standards, the Secretariat of the Nuclear Regulation Authority (SNRA) commissioned the Japan Nuclear Energy Safety Organization (JNES) to study an assessment guide for tornado effect on NPPs intended to be used for an official safety review for a NPP construction. JNES organized Sectional Committee for Tornado Effect Assessment Guide consisting of experts in meteorology and wind engineering fields, discussing about assessment methods for tornado effect on NPPs, draft version of the assessment guide for tornado effect on NPPs was completed on April 4, 2013, and JNES submitted the draft guide to SNRA on the same date. After that NRA called for public comments for the draft version of the assessment guide, the draft version of the assessment guide was partly amended taking posted public comments account, and tornado effect assessment guide was officially released on June 19, 2013. Contents in this paper are as follows, assessment guide for tornado effect on NPPs (Draft version on April 4, 2013), supplementary documents, calculation examples, and future tasks for further improved reliability of tornado effect assessment on NPPs. This draft guide consists of six chapters

Assessment guide for tornado effect on Nuclear Power Plants (draft) with its commentaries

Energy Technology Data Exchange (ETDEWEB)

Inoue, Hiroto; Fukunishi, Shiro; Suzuki, Tetsuo [Japan Nuclear Energy Safety Organization, Seismic Safety Department, Tokyo (Japan)

2013-10-15

In the context of a severe accident at the Fukushima Daiichi Nuclear Power Station (NPS) operated by the Tokyo Electric Power Company (TEPCO) due to the 2011 off the Pacific coast of Tohoku Earthquake and Tsunami, Nuclear Regulation Authority (NRA) was established on September 19, 2012 under the relevant law. After that NRA organized a task force for studying new regulatory standards for nuclear power plants (NPPs) in consideration of lessons learned from the severe accident at Fukushima. In the task force open meeting, through discussing about design basis external natural events which should be considered in the new regulatory standards, tornado was newly introduced into new regulatory standards as an external natural event. Based on the decision that tornado was newly introduced into new regulatory standards, the Secretariat of the Nuclear Regulation Authority (SNRA) commissioned the Japan Nuclear Energy Safety Organization (JNES) to study an assessment guide for tornado effect on NPPs intended to be used for an official safety review for a NPP construction. JNES organized Sectional Committee for Tornado Effect Assessment Guide consisting of experts in meteorology and wind engineering fields, discussing about assessment methods for tornado effect on NPPs, draft version of the assessment guide for tornado effect on NPPs was completed on April 4, 2013, and JNES submitted the draft guide to SNRA on the same date. After that NRA called for public comments for the draft version of the assessment guide, the draft version of the assessment guide was partly amended taking posted public comments account, and tornado effect assessment guide was officially released on June 19, 2013. Contents in this paper are as follows, assessment guide for tornado effect on NPPs (Draft version on April 4, 2013), supplementary documents, calculation examples, and future tasks for further improved reliability of tornado effect assessment on NPPs. This draft guide consists of six chapters

Numerical Investigation of the Flow Structure in a Kaplan Draft Tube at Part Load

Science.gov (United States)

Maddahian, R.; Cervantes, M. J.; Sotoudeh, N.

2016-11-01

This research presents numerical simulation of the unsteady flow field inside the draft tube of a Kaplan turbine at part load condition. Due to curvature of streamlines, the ordinary two-equations turbulence models fail to predict the flow features. Therefore, a modification of the Shear Stress Transport (SST-SAS) model is utilized to approximate the turbulent stresses. A guide vane, complete runner and draft tube are considered to insure the real boundary conditions at the draft tube inlet. The outlet boundary is assumed to discharge into the atmosphere. The obtained pressure fluctuations inside the draft tube are in good agreement with available experimental data. In order to further investigate the RVR formation and its movement, the λ2 criterion, relating the position of the vortex core and strength to the second largest Eigen value of the velocity gradient tensor, is employed. The method used for vortex identification shows the flow structure and vortex motion inside the draft tube accurately.

Anomalous Hydrodynamic Drafting of Interacting Flapping Flags

Science.gov (United States)

Ristroph, Leif; Zhang, Jun

2008-11-01

In aggregates of objects moving through a fluid, bodies downstream of a leader generally experience reduced drag force. This conventional drafting holds for objects of fixed shape, but interactions of deformable bodies in a flow are poorly understood, as in schools of fish. In our experiments on “schooling” flapping flags, we find that it is the leader of a group who enjoys a significant drag reduction (of up to 50%), while the downstream flag suffers a drag increase. This counterintuitive inverted drag relationship is rationalized by dissecting the mutual influence of shape and flow in determining drag. Inverted drafting has never been observed with rigid bodies, apparently due to the inability to deform in response to the altered flow field of neighbors.

Reliability Centered Maintenance - Methodologies

Science.gov (United States)

Kammerer, Catherine C.

2009-01-01

Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

76 FR 57759 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Science.gov (United States)

2011-09-16

... federally-owned subsurface mineral estate. The Colorado River Valley Field Office and the KFO were... Office, Colorado AGENCY: Bureau of Land Management, Interior. ACTION: Notice of availability. SUMMARY: In... Avenue, Kremmling, Colorado 80459. Copies of the Kremmling Draft RMP/EIS are available in the KFO at the...

Philosophy, policies, and procedures - The three P's of flight-deck operations

Science.gov (United States)

Degani, Asaf; Wiener, Earl L.

1991-01-01

Standard operating procedures are drafted and provided to flightcrews to dictate the manner in which tasks are carried out. Failure to conform to Standard Operating Procedures (SOP) is frequently listed as the cause of violations, incidents, and accidents. However, procedures are often designed piecemeal, rather than being based on a sound philosophy of operations and policies that follow from such a philosophy. A framework of philosophy, policies, and procedures is proposed.

78 FR 15894 - Draft Qualitative Risk Assessment of Risk of Activity/Food Combinations for Activities (Outside...

Science.gov (United States)

2013-03-13

.... FDA-2012-N-1258] Draft Qualitative Risk Assessment of Risk of Activity/Food Combinations for... comment period for a document entitled ``Draft Qualitative Risk Assessment of Risk of Activity/ [[Page... ``Draft Qualitative Risk Assessment of Risk of Activity/Food Combinations for Activities (Outside the Farm...

78 FR 50088 - Notice of Availability of the Northwest Colorado Greater Sage-Grouse Draft Resource Management...

Science.gov (United States)

2013-08-16

... Availability of the Northwest Colorado Greater Sage- Grouse Draft Resource Management Plan Amendment and Draft... Land Management (BLM) has prepared a Northwest Colorado Greater Sage-Grouse Draft Resource Management.../or mailings. ADDRESSES: You may submit comments related to the Northwest Colorado Greater Sage-Grouse...

Methodology for the design of the method of siliceous sandstones operation using special software

Directory of Open Access Journals (Sweden)

Luis Ángel Lara-González

2014-12-01

Full Text Available The methodologies used for the design of the method of sandstones explotation by descending staggered banks using specialized software tools are reported. The data analyzed were collected in the field for the operating license 14816 in Melgar, Tolima. The characterization of the rock mass was held from physical and mechanical tests, performed on cylindrical test tubes in order to obtain the value of the maximum strenght and elastic modulus of the rock. The direction and dip of the sandstone package was rock. The direction and dip of the sandstone package was determined by using the stereographic projection whit DIPS®  software, and the safety factor of the slope was obtained with established banks whit SLIDE® . The slops are 8 meters high and 8 meters wide whit a tilt angle 60°, which generated a safety factor  of 2.1. The design  of the mining method was carried out with GEOVIA SURPAC® , at an early stage of development ascending to the level 11 of the exploitation, to then start mining in descending order to control the stabiLity of slopes. The results obtained allow a general methodology for the development of projects to optimize the process of evaluation and selection of mining method by using specialized design tools.

Draft environmental impact statement for construction and operation of the proposed Bangor Hydro-Electric Company`s second 345-kV transmission tie line to New Brunswick

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-10-01

This Draft Environmental Impact Statement (DEIS) was prepared by the US Department of Energy (US DOE). The proposed action is the issuance of Presidential Permit PP-89 by DOE to Bangor Hydro-Electric Company to construct and operate a new international transmission line interconnection to New Brunswick, Canada that would consist of an 83.8 mile (US portion), 345-kilovolt (kV) alternating current transmission line from the US-Canadian border at Baileyville, Maine to an existing substation at Orrington, Maine. The principal environmental impacts of the construction and operation of the transmission line would be incremental in nature and would include the conversion of forested uplands (mostly commercial timberlands) and wetlands to right-of-way (small trees, shrubs, and herbaceous vegetation). The proposed line would also result in localized minor to moderate visual impacts and would contribute a minor incremental increase in the exposure of some individuals to electromagnetic fields. This DEIS documents the purpose and need for the proposed action, describes the proposed action and alternatives considered and provides a comparison of the proposed and alternatives routes, and provides detailed information on analyses of the environmental consequences of the proposed action and alternatives, as well as mitigative measures to minimize impacts.

75 FR 27579 - Bison Brucellosis Remote Vaccination, Draft Environmental Impact Statement, Yellowstone National...

Science.gov (United States)

2010-05-17

... DEPARTMENT OF THE INTERIOR National Park Service Bison Brucellosis Remote Vaccination, Draft... Brucellosis Remote Vaccination Program, Yellowstone National Park. SUMMARY: Pursuant to the National... the Bison Brucellosis Remote Vaccination Draft Environmental Impact Statement (EIS) for Yellowstone...

A Fatigue Management System for Sustained Military Operations

Science.gov (United States)

2008-03-31

Medications in Sustained Operations – Storm et al. DRAFT anxiolytic, myorelaxant, and anticonvulsant properties, and...sedation in pediatric anesthesia (Scheepers, Montgomery, Kinahan, et al., 2000). Submucosal administration was compared to intravenous administration...Arheart KL, & Mandrell TD (2000). Comparative pharmacokinetics of submucosal vs. intravenous flumazenil (Romazicon) in an animal model. Pediatr

Basis for Interim Operation for the K-Reactor in Cold Standby

Energy Technology Data Exchange (ETDEWEB)

Shedrow, B.

1998-10-19

The Basis for Interim Operation (BIO) document for K Reactor in Cold Standby and the L- and P-Reactor Disassembly Basins was prepared in accordance with the draft DOE standard for BIO preparation (dated October 26, 1993).

Basis for Interim Operation for the K-Reactor in Cold Standby

International Nuclear Information System (INIS)

Shedrow, B.

1998-01-01

The Basis for Interim Operation (BIO) document for K Reactor in Cold Standby and the L- and P-Reactor Disassembly Basins was prepared in accordance with the draft DOE standard for BIO preparation (dated October 26, 1993)

Evaluation of a main steam line break with induced, multiple tube ruptures: A comparison of NUREG 1477 (Draft) and transient methodologies Palo Verde Nuclear Generating Station

Energy Technology Data Exchange (ETDEWEB)

Parrish, K.R.

1995-09-01

This paper presents the approach taken to analyze the radiological consequences of a postulated main steam line break event, with one or more tube ruptures, for the Palo Verde Nuclear Generating Station. The analysis was required to support the restart of PVNGS Unit 2 following the steam generator tube rupture event on March 14, 1993 and to justify continued operation of Units 1 and 3. During the post-event evaluation, the NRC expressed concern that Unit 2 could have been operating with degraded tubes and that similar conditions could exist in Units 1 and 3. The NRC therefore directed that a safety assessment be performed to evaluate a worst case scenario in which a non-isolable main steam line break occurs inducing one or more tube failures in the faulted steam generator. This assessment was to use the generic approach described in NUREG 1477, Voltage-Based Interim Plugging Criteria for Steam Generator Tubes - Task Group Report. An analysis based on the NUREG approach was performed but produced unacceptable results for off-site and control room thyroid doses. The NUREG methodology, however, does not account for plant thermal-hydraulic transient effects, system performance, or operator actions which could be credited to mitigate dose consequences. To deal with these issues, a more detailed analysis methodology was developed using a modified version of the Combustion Engineering Plant Analysis Code, which examines the dose consequences for a main steam line break transient with induced tube failures for a spectrum equivalent to 1 to 4 double ended guillotine U-tube breaks. By incorporating transient plant system responses and operator actions, the analysis demonstrates that the off-site and control room does consequences for a MSLBGTR can be reduced to acceptable limits. This analysis, in combination with other corrective and recovery actions, provided sufficient justification for continued operation of PVNGS Units 1 and 3, and for the subsequent restart of Unit 2.

Evaluation of a main steam line break with induced, multiple tube ruptures: A comparison of NUREG 1477 (Draft) and transient methodologies Palo Verde Nuclear Generating Station

International Nuclear Information System (INIS)

Parrish, K.R.

1995-01-01

This paper presents the approach taken to analyze the radiological consequences of a postulated main steam line break event, with one or more tube ruptures, for the Palo Verde Nuclear Generating Station. The analysis was required to support the restart of PVNGS Unit 2 following the steam generator tube rupture event on March 14, 1993 and to justify continued operation of Units 1 and 3. During the post-event evaluation, the NRC expressed concern that Unit 2 could have been operating with degraded tubes and that similar conditions could exist in Units 1 and 3. The NRC therefore directed that a safety assessment be performed to evaluate a worst case scenario in which a non-isolable main steam line break occurs inducing one or more tube failures in the faulted steam generator. This assessment was to use the generic approach described in NUREG 1477, Voltage-Based Interim Plugging Criteria for Steam Generator Tubes - Task Group Report. An analysis based on the NUREG approach was performed but produced unacceptable results for off-site and control room thyroid doses. The NUREG methodology, however, does not account for plant thermal-hydraulic transient effects, system performance, or operator actions which could be credited to mitigate dose consequences. To deal with these issues, a more detailed analysis methodology was developed using a modified version of the Combustion Engineering Plant Analysis Code, which examines the dose consequences for a main steam line break transient with induced tube failures for a spectrum equivalent to 1 to 4 double ended guillotine U-tube breaks. By incorporating transient plant system responses and operator actions, the analysis demonstrates that the off-site and control room does consequences for a MSLBGTR can be reduced to acceptable limits. This analysis, in combination with other corrective and recovery actions, provided sufficient justification for continued operation of PVNGS Units 1 and 3, and for the subsequent restart of Unit 2

A study on the operator's errors of commission (EOC) in accident scenarios of nuclear power plants: methodology development and application

International Nuclear Information System (INIS)

Kim, Jae Whan; Jung, Won Dea; Park, Jin Kyun; Kang, Da Il

2003-04-01

As the concern on the operator's inappropriate interventions, the so-called Errors Of Commission (EOCs), that can exacerbate the plant safety has been raised, much of interest in the identification and analysis of EOC events from the risk assessment perspective has been increased. Also, one of the items in need of improvement for the conventional PSA and HRA that consider only the system-demanding human actions is the inclusion of the operator's EOC events into the PSA model. In this study, we propose a methodology for identifying and analysing human errors of commission that might be occurring from the failures in situation assessment and decision making during accident progressions given an initiating event. In order to achieve this goal, the following research items have been performed: Firstly, we analysed the error causes or situations contributed to the occurrence of EOCs in several incidents/accidents of nuclear power plants. Secondly, limitations of the advanced HRAs in treating EOCs were reviewed, and a requirement for a new methodology for analysing EOCs was established. Thirdly, based on these accomplishments a methodology for identifying and analysing EOC events inducible from the failures in situation assessment and decision making was proposed and applied to all the accident sequences of YGN 3 and 4 NPP which resulted in the identification of about 10 EOC situations

76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

Science.gov (United States)

2011-10-25

...-01] NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft... draft version of the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0... Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0) (Draft) for public review and...

76 FR 38187 - International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of...

Science.gov (United States)

2011-06-29

...] International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of Drug Substances... Manufacture of Drug Substances.'' The draft guidance was prepared under the auspices of the International... that a draft guidance entitled ``Q11 Development and Manufacture of Drug Substances'' should be made...

78 FR 68852 - Draft Guidance for Industry on Acrylamide in Foods; Availability

Science.gov (United States)

2013-11-15

... placing preparation and cooking instructions on frozen French fry packages. Lastly, the draft guidance is... high-temperature cooking. The draft guidance is intended to suggest a range of possible approaches to... during certain types of high-temperature cooking, and is a concern because it can cause cancer in...

76 FR 64327 - Office of Oceanic and Atmospheric Research Draft Strategic Plan

Science.gov (United States)

2011-10-18

...: 111003608-1608-01] Office of Oceanic and Atmospheric Research Draft Strategic Plan AGENCY: Office of Oceanic... notice announces that OAR's draft Strategic Plan (FY12- 18) is available for public review and comment... next six years. These goals and objectives will provide guidance and strategic direction for program...

75 FR 57081 - Revised Draft Safety Culture Policy Statement: Request for Comments

Science.gov (United States)

2010-09-17

... culture. Experience has shown that certain personal and organizational traits are present in a positive safety culture. A trait, in this case, is a pattern of thinking, feeling, and behaving that emphasizes... organizational environments. IV. Changes to the Initial Draft Statement of Policy Like the initial draft SOP, the...

Crystalline Repository Project: Review and comment of the Leech Lake Reservation Business Committee: Draft area recommendation report

International Nuclear Information System (INIS)

1986-09-01

The Leech Lake Reservation Business Committee (LLRBC) has reviewed five documents related to the US Department of Energy's Crystalline Repository Project (CRP). They are the ''National Survey of Crystalline Rocks,'' ''General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories;' Final Siting Guidelines (10 CFR Part 960),'' ''Regional Characterization Reports for the North Central Region,'' the ''Region to Area Screening Methodology Document'' (SMD) and the ''Draft Area Recommendation Report'' (DARR). The comments and discussions of issues contained in this review will be considered in the preparation of the Final Area Recommendation Report, which will formally identify potentially acceptable sites for a second national repository for the permanent disposal of high level nuclear waste. Following a review of the above referenced documents, the LLRBC has concluded that the identification of potentially acceptable sites in the Draft Area Recommendation Report is based upon inferior and incomplete technical information being applied to a flawed screening process which, among other deficiencies, pays little attention to the importance of hydrological factors in the siting process. Although the DOE prefers that comments from states and tribes be directed at the Draft Area Recommendation Report alone, the Leech Lake Reservation Business Committee is extremely concerned about inadequacies in the ''National Survey of Crystalline Rocks'' (ORCD-1), which serves as the foundation for all siting work done to date. The national survey was conducted utilizing little of the time or staffing required for this important phase of the Crystalline Repository Program. As a result, the national survey is based upon out-of-date scientific literature, exaggerates certain screening variables that favor the selection of regions in the eastern US and arbitrarily eliminated the few western crystalline rock bodies that passed the questionable screening process utilized

Research of psychological characteristics and performance relativity of operators

International Nuclear Information System (INIS)

Fang Xiang; He Xuhong; Zhao Bingquan

2008-01-01

Based on the working tasks of an operator being taken into full consideration in this paper, on the one hand the table of measuring psychological characteristics is designed through the selection of special dimensions; on the other hand the table of performance appraisal is drafted through the choice of suitable standards of an operator. The paper analyzes the results of two aspects, sets relevant nuclear power plant operators as the research objective, and obtains the psychological characteristics and performance relativity of operators. The research can be as important and applied reference for the selection, evaluation and use of operators

POSSIBLE ROLE OF INDOOR RADON REDUCTION SYSTEMS IN BACK-DRAFTING RESIDENTIAL COMBUSTION APPLIANCES

Science.gov (United States)

The article gives results of a computational sensitivity analysis conducted to identify conditions under which residential active soil depressurization (ASD) systems for indoor radon reduction might contribute to or create back-drafting of natural draft combustion appliances. Par...

Postclosure risks at the proposed Yucca Mountain repository: A review of methodological and technical issues

International Nuclear Information System (INIS)

Emel, J.; Kasperson, R.E.; Goble, R.; Renn, O.

1988-06-01

Accordingly, the first section of the report provides an overview and critique of the risk analysis methodology proposed by the US Department of Energy (DOE 1988) in the Draft Site Characterization Plan (SCP) and related documents. The second section addresses specific technical problems associated with the site. Each section considers the significance or implications of the issues for the successful long-term isolation of radioactive wastes from the biosphere. We conclude with overall observations on the adequacy of current understandings and approaches in the waste disposal program and implications for the State of Nevada

The possible role of indoor radon reduction systems in back-drafting residential combustion appliances

International Nuclear Information System (INIS)

Henschel, D.B.

1997-01-01

A computational sensitivity analysis was conducted to identify the conditions under which residential active soil depressurization (ASD) systems for indoor radon reduction might most likely exacerbate or create back-drafting of natural-draft combustion appliances. Parameters varied included: house size; normalized leakage area; exhaust rate of exhaust appliances other than the ASD system; and the amount of house air exhausted by the ASD system. Even with a reasonably conservative set of assumptions, it is predicted that ASD systems should not exacerbate or create back- drafting in most of the U.S. housing stock. Only at normalized leakage areas lower than 3 to 4 cm 2 commercial at 4 Pa) per m 2 of floor area should ASD contribute to back-drafting, even in small houses at high ASD exhaust rates (compared to a mean of over 10 cm 2 /m 2 determined from data on over 12,000 U.S. houses). But on the other hand, even with a more forgiving set of assumptions, it is predicted that ASD systems could contribute to back-drafting in some fraction of the housing stock -houses tighter than about 1 to 2 cm 2 /m 2 - even in large houses at minimal ASD exhaust rates. It is not possible to use parameters such as house size or ASD system flow rate to estimate reliably the risk that an ASD system might contribute to back-drafting in a given house. Spillage/back-draft testing would be needed for essentially all installations. (au) 18 refs

32 CFR 989.19 - Draft EIS.

Science.gov (United States)

2010-07-01

... summary to the public with an attached list of locations (such as public libraries) where the entire draft... a proposed action will potentially have disproportionately high and adverse human health or... as when there has been a significant change in circumstances, development of significant new...

78 FR 64428 - Draft Qualitative Risk Assessment of Risk of Activity/Animal Food Combinations for Activities...

Science.gov (United States)

2013-10-29

.... FDA-2013-N-1043] Draft Qualitative Risk Assessment of Risk of Activity/Animal Food Combinations for... entitled ``Draft Qualitative Risk Assessment of Risk of Activity/Animal Food Combinations for Activities...(n) of the FD&C Act. II. Qualitative Risk Assessment As explained in the draft RA, we conducted the...

76 FR 24511 - Cabo Rojo National Wildlife Refuge, Cabo Rojo, Puerto Rico; Draft Comprehensive Conservation Plan...

Science.gov (United States)

2011-05-02

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R4-R-2010-N277; 40136-1265-0000-S3] Cabo Rojo National Wildlife Refuge, Cabo Rojo, Puerto Rico; Draft Comprehensive Conservation Plan and... draft comprehensive conservation plan and environmental assessment (Draft CCP/EA) for Cabo Rojo National...

Final environmental impact statement for the continued operation of the Pantex Plant and associated storage of nuclear weapon components. Volume 3 -- Comment response

International Nuclear Information System (INIS)

1996-11-01

The Draft Environmental Impact Statement (EIS) for the continued operation of Pantex Plant was published in March 1996. The document assessed the alternatives of no action, relocation of the storage of plutonium components resulting from nuclear weapon disassemble activities at Pantex Plant to another site, and the proposed action (preferred alternative) of continuing operations and increasing the quantity of pits in interim storage at Pantex Plant. This report contains the comments and responses received on the Draft EIS

78 FR 12329 - Distinguishing Medical Device Recalls From Product Enhancements; Reporting Requirements; Draft...

Science.gov (United States)

2013-02-22

... medical devices to take timely action to correct violative devices or remove them from the marketplace...] Distinguishing Medical Device Recalls From Product Enhancements; Reporting Requirements; Draft Guidance for... draft guidance entitled ``Distinguishing Medical Device Recalls From Product Enhancements; Reporting...

75 FR 53979 - Bison Brucellosis Remote Vaccination, Draft Environmental Impact Statement, Yellowstone National...

Science.gov (United States)

2010-09-02

... DEPARTMENT OF THE INTERIOR National Park Service Bison Brucellosis Remote Vaccination, Draft Environmental Impact Statement, Yellowstone National Park, Wyoming ACTION: Reopening of public comment period... Brucellosis Remote Vaccination Draft Environmental Impact Statement. The original comment period was from 28...

21 CFR 10.80 - Dissemination of draft Federal Register notices and regulations.

Science.gov (United States)

2010-04-01

... petitioner relating to the draft will be recorded in a written memorandum, and all memoranda and... may discuss orally or in writing with an interested person ideas and recommendations for notices or... must be in writing and filed with the Division of Dockets Management. (2) A draft of a notice or...

Nuclear power plant simulation facility evaluation methodology

International Nuclear Information System (INIS)

Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

1985-01-01

A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

Model development and optimization of operating conditions to maximize PEMFC performance by response surface methodology

International Nuclear Information System (INIS)

Kanani, Homayoon; Shams, Mehrzad; Hasheminasab, Mohammadreza; Bozorgnezhad, Ali

2015-01-01

Highlights: • The optimization of the operating parameters in a serpentine PEMFC is done using RSM. • The RSM model can predict the cell power over the wide range of operating conditions. • St-An, St-Ca and RH-Ca have an optimum value to obtain the best performance. • The interactions of the operating conditions affect the output power significantly. • The cathode and anode stoichiometry are the most effective parameters on the power. - Abstract: Optimization of operating conditions to obtain maximum power in PEMFCs could have a significant role to reduce the costs of this emerging technology. In the present experimental study, a single serpentine PEMFC is used to investigate the effects of operating conditions on the electrical power production of the cell. Four significant parameters including cathode stoichiometry, anode stoichiometry, gases inlet temperature, and cathode relative humidity are studied using Design of Experiment (DOE) to obtain an optimal power. Central composite second order Response Surface Methodology (RSM) is used to model the relationship between goal function (power) and considered input parameters (operating conditions). Using this statistical–mathematical method leads to obtain a second-order equation for the cell power. This model considers interactions and quadratic effects of different operating conditions and predicts the maximum or minimum power production over the entire working range of the parameters. In this range, high stoichiometry of cathode and low stoichiometry of anode results in the minimum cell power and contrary the medium range of fuel and oxidant stoichiometry leads to the maximum power. Results show that there is an optimum value for the anode stoichiometry, cathode stoichiometry and relative humidity to reach the best performance. The predictions of the model are evaluated by experimental tests and they are in a good agreement for different ranges of the parameters

77 FR 8902 - Draft Regulatory Guide: Issuance, Availability Decommissioning of Nuclear Power Reactors

Science.gov (United States)

2012-02-15

... Decommissioning of Nuclear Power Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Draft regulatory guide... draft regulatory guide (DG) DG-1271 ``Decommissioning of Nuclear Power Reactors.'' This guide describes... Regulatory Guide 1.184, ``Decommissioning of Nuclear Power Reactors,'' dated July 2000. This proposed...

CFD Analysis of The Hydraulic Turbine Draft Tube to Improve System Efficiency

Directory of Open Access Journals (Sweden)

Chakrabarty Spandan

2016-01-01

Full Text Available Demand of the power is increasing day by day with the development of the science and technology. Development of the renewable energy sector has become essential issue at the present situation due to the limited source of the non-renewable energy. Hydro energy power generation sector is superior over the other renewable sector due to the high efficiency, ability to continuous generation and low generation cost. In India a great amount of the power generation is taken care by the hydro power system but still some more potential have unexplored. The efficiency improvement of the hydro turbine system can be done for the new installation or installed system by the improvement in component level. The system can be installed by the state of the art equipment, like modern inlet guide vane (IGV control system, improved design of the runner, IGV system, draft tube, penstock to reduce the loss, hence improve the efficiency. The energy recovery in the draft tube depends on the design of draft tube. In the present work the optimized design of the draft tube shape through computational fluid dynamics (CFD simulation has been carried out in ANSYS FLUENT platform. The design objective of the draft tube is to reduce the flow loss and improve the energy recovery, hence to improve the efficiency.

Structure and drafting of safeguards regulatory documents

International Nuclear Information System (INIS)

Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

1977-09-01

This study develops hypothesis about the relation between the structure and drafting of safeguards regulatory documents and the ability of document users to understand and implement them in a way that reflects the intent and requirements of the NRC. Four decisions are needed to improve communication: (1) Should improvement of safeguards regulatory documents as communication instruments be an explicit NRC program. (2) What specific methods of communication should be the focus of improvement efforts. (3) What actions to improve communications are feasible and desirable. (4) How should the NRC divide its available effort and resources among desirable actions in order to provide the most effective communication through regulatory documents. This volume contains: introduction, conceptual bases, legal requirements, targets, choice of documents, preparation of documents, readability, and further study of recommended changes in structure and drafting

Adding Realism to Technical Drafting Programs

Science.gov (United States)

Weaver, Gerald L.

1976-01-01

Suggestions for improved, relevant technical drafting programs are presented: (1) making realistic assignments, (2) viewing real projects, (3) duplicating industrial projects, (4) practicing lettering, (5) conducting research, (6) engaging in teamwork, (7) adapting to change, (8) learning to meet deadlines, and (9) stressing the importance of…

Review of site recommendation process in Draft Environmental Assessments

International Nuclear Information System (INIS)

Joy, H.; Longo, T.; Burton, E.S.

1985-01-01

In December 1984, the US Department of Energy (DOE) published Draft Environmental Assessments (EAs) on nine potentially acceptable nuclear waste repository sites. Five sites in the states of Mississippi, Nevada, Texas, Utah, and Washington were proposed in the Draft EAs for nomination under the Nuclear Waste Policy Act as suitable for further detailed study (site characterization). The Nevada, Texas, and Washington sites were further proposed for recommendation to the President as preferred for site characterization. This paper reviews the process that DOE used in selecting the three sites proposed for site characterization. The process is consistent with DOE's implementation guidelines for selecting repository sites, and proceeds in three steps. First, the sites are ranked in order of preference for each of twenty technical guidelines based on information in the Draft EAs. The second step combines the individual guideline rankings into postclosure and preclosure guideline group rankings, and, finally, into an overall ranking. In the third step, the sensitivity of the choice of the three preferred sites is examined for a range of guideline weightings

Shanghai Futures Exchange Published Draft of Tin and Nickel Futures Contract

Institute of Scientific and Technical Information of China (English)

2015-01-01

Shanghai Futures Exchange published draft for soliciting opinions for tin and nickel futures contract on its official website on January 19,which implies the marketing time of the long awaited tin and nickel futures is drawing near.According to the draft for soliciting opinions,the transaction unit of tin futures contract is 1tonne/lot,minimum variation unit is 10 yuan/tonne,daily maximum price fluctuation shall

The 'PROCESO' index: a new methodology for the evaluation of operational safety in the chemical industry

International Nuclear Information System (INIS)

Marono, M.; Pena, J.A.; Santamaria, J.

2006-01-01

The acknowledgement of industrial installations as complex systems in the early 1980s outstands as a milestone in the path to operational safety. Process plants are social-technical complex systems of a dynamic nature, whose properties depend not only on their components, but also on the inter-relations among them. A comprehensive assessment of operational safety requires a systemic approach, i.e. an integrated framework that includes all the relevant factors influencing safety. Risk analysis methodologies and safety management systems head the list of methods that point in this direction, but they normally require important plant resources. As a consequence, their use is frequently restricted to especially dangerous processes often driven by compliance with legal requirements. In this work a new safety index for the chemical industry, termed the 'Proceso' Index (standing for the Spanish terms for PROCedure for the Evaluation of Operational Safety), has been developed. PROCESO is based on the principles of systems theory, has a tree-like structure and considers 25 areas to guide the review of plant safety. The method uses indicators whose respective weight values have been obtained via an expert judgement technique. This paper describes the steps followed to develop this new Operational Safety Index, explains its structure and illustrates its application to process plants

Criteria development methodology for DOE decommissioning operations

International Nuclear Information System (INIS)

Denham, D.H.

1981-01-01

The Radiological Guide for DOE Decommissioning Operations provides a uniform basis for assessing hazard inventories, making risk analyses, performing site characterizations, and certifying decommissioning operations. While initially addressed to radioactive contaminants, in all likelihood it will be extended to include other contaminants

Integrated Science Assessment (ISA) for Carbon Monoxide (Second External Review Draft, Sep 2009)

Science.gov (United States)

EPA announced that the Second External Review Draft of the Integrated Science Assessment (ISA) for Carbon Monoxide (CO) and related Annexes was made available for independent peer review and public review. This draft ISA document represents a concise synthesis and evaluation of t...

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (Interagency Science Consultation Draft)

Science.gov (United States)

In September 2016, EPA released the draft IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) for public comment and discussion. The draft assessment was reviewed internally by EPA and by other federal agencies and White House Offices before public release. Consistent ...

Safety requirements to be met in final storage of heat-producing waste an evaluation of the BMU draft

International Nuclear Information System (INIS)

Thomauske, B.

2008-01-01

The German Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety (BMU) on August 12, 2008 published a July 29, 2008 draft of the ''Safety Requirements to Be Met in Final Storage of Heat-producing Radioactive Waste.'' As announced by the BMU, these safety requirements are to bring up to the state of the art the safety criteria of 1983. Over a couple of years, efforts had been made to adapt the criteria to the internationally accepted standard as demanded by the Advisory Committees on Reactor Safeguards (RSK) and Radiation Protection (SSK). The main changes made by the BMU are the introduction of a phased procedure in building repositories. A phased plans approval procedure under the Atomic Energy Act has been foreseen by the Ministry for this purpose. In addition, the draft provides for the introduction of a risk-based goal of protection. To ensure retrievability of the waste, the casks are to have a demonstrated service life of 500 years. The BMU draft safety requirements are unable to bring the safety criteria of 1983 up to the current state of the art. Here are the key points of criticism: - A risk-based goal of protection is introduced. The yardstick to be applied is to be defined in a guideline yet to be elaborated. As a consequence, the draft lacks substance. - As in licensing of nuclear facilities, the licensing procedure provides for a phased plans approval procedure for exploration. This analogy does not exist, as exploration is not the first phase of the plant to be built but a measure which is a precondition for obtaining a permit for construction and operation. - The information contained in the draft indicates that, contrary to international recommendations, it tightens the goal of protection by more than one order of magnitude. - The requirements to be met by the casks because of retrievability impose constraints on solutions optimized for safety in emplacement technology. - The risk-based approach is not mature and is

Review of the performance assessment in the WIPP draft compliance application

International Nuclear Information System (INIS)

Lee, W.W.L.

1996-01-01

On March 31, 1995, the U.S. Department of Energy (USDOE) filed a draft compliance certification application (DCCA) with the U.S. Environmental Protection Agency (USEPA) to show the Waste Isolation Pilot Plant's compliance with the USEPA's environmental standards for disposal of high-level and transuranic waste. Demonstration of compliance is by a performance assessment. This paper is an early review of the performance assessment in the draft application, by the Environmental Evaluation Group, an oversight group. The performance assessment in the draft application is incomplete. Not all relevant scenarios have been analyzed. The calculation of potential consequences often does not use experimental data but rather estimates by workers developing additional data. The final compliance application, scheduled for October 1996, needs to consider additional scenarios, and be fully based on experimental data

Principles of European Law on Service Contracts: background, genesis, and drafting method

NARCIS (Netherlands)

Jansen, C.E.C.; Zimmermann, R.

2010-01-01

The Principles of European Law on Service Contracts (PEL SC) were drafted between 1999 and 2006 by the Tilburg Team of the Study Group on a European Civil Code (SGECC). A slightly modified version of the PEL SC has recently been implemented in Book IV.C of the Draft Common Frame of Reference (DCFR).

Panel drafts position on U.S. science budget

Science.gov (United States)

The AGU panel charged with writing the Union position on the U.S. fiscal 1993 budget met at AGU Headquarters on February 27 to draft their statement and hear from representatives of federal science agencies. The panel's position statement is expected to be completed by the end of March, pending approval by the AGU Council.AGU has drafted positions on the U.S. science budget since 1990. This year's panel includes Terry E. Tullis (chair), Brown University; H. Frank Eden, General Electric Astro Space; Thomas E. Pyle, Joint Oceanographic Institutions, Inc.; Thomas Potemra, Johns Hopkins Applied Physics Laboratory; David W. Simpson, Incorporated Research Institutions for Seismology; Steven W. Squyres, Cornell University; and Eric F. Wood, Princeton University.

Articulation Workshop in Drafting. Final Report.

Science.gov (United States)

Catonsville Community Coll., MD.

Drafting students from vocational/technical and high schools frequently repeat the same experiences and courses and work with the same instructional materials when they enroll in college engineering drawing, and architecture programs. In order to minimize needless repetition and address the problem of articulation between such schools and the…

77 FR 34390 - Draft Guidance for Industry: Amendment to “Guidance for Industry: Revised Preventive Measures To...

Science.gov (United States)

2012-06-11

... recommendations for plasma-derived products, including albumin and products containing plasma-derived albumin, in..., submit either electronic or written comments on the draft guidance by September 10, 2012. ADDRESSES... electronic access to the draft guidance document. Submit electronic comments on the draft guidance to http...

Resolution of digital instrumentation and control and human factors technical and regulatory issues for new plants and for modernization of operating plants

International Nuclear Information System (INIS)

Naser, J.A.; Torok, R.C.; Canavan, K.T.

2008-01-01

There are several technical and regulatory issues in the areas of digital I and C, human factors, and control rooms needing generic resolution. If they are not generically resolved, they can contribute to protracted regulatory reviews for operating plant license amendments and substantial delays and increased costs for new plant COL approvals. Therefore; a coordinated, proactive program has been established to resolve key issues. Both Industry and NRC have roles in resolving these key issues and addressing them in future design efforts and regulatory reviews. The Industry initiative is led by the NEI Digital I and C and Human Factors Working Group. NRC has established Task Working Groups under the NRC Digital I and C Steering Committee to address the issues and interact with Industry. EPRI is providing technical input and resolution leadership for some of the issues being addressed in three of the task working groups. For the Highly Integrated Control Room - Human Factors Task area, EPRI has taken the lead in developing draft industry position technical reports for the following three issues: 1) Minimum inventory of human system interfaces, 2) Computerized procedures and associated topics of automation and soft controls, and 3) Methodology to determine the acceptability of manual operator actions response times for a BTP 7-19 software common cause failure. For the Diversity and Defense-in-Depth area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Integrating defensive measures and diversity attributes to protect against digital common cause failures and 2) Susceptibility of digital devices and components to common cause failures. For the Risk Informing area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Clarifying how to use current methods to model digital systems in a PRA and 2) Application of PRA to specific digital I and C issues

Lawrence Livermore National Laboratory Decontamination and Waste Treatment Facility: Documentation of impact analysis for design alternatives presented in the Draft Environmental Impact Statement

International Nuclear Information System (INIS)

1988-05-01

Lawrence Livermore National Laboratory (LLNL) is proposing to construct and operate a new Decontamination and Waste Treatment Facility (DWTF). The proposed DWTF would replace the existing Hazardous Waste Management (HWM) facilities at LLNL. The US Department of Energy (DOE) is preparing a Draft Environmental Impact Statement (DEIS) to assess the environmental consequences of the proposed DWTF and its alternatives. This report presents the assumptions, methodologies, and analyses used to estimate the waste flows, air emissions, ambient air quality impacts, and public health risks that are presented in the DEIS. Two DWTF design alternatives (Level I and Level II) have been designated as reasonable design alternatives considering available technologies, environmental regulations, and current and future LLNL waste generation. Both design alternatives would include new, separate radioactive and nonradioactive liquid waste treatment systems, a solidification unit, a new decontamination facility, storage and treatment facilities for reactive materials, a radioactive waste storage area, receiving and classification areas, and a uranium burn pan. The Level I design alternative would include a controlled-air incinerator system, while the Level II design alternative would include a rotary kiln incinerator system. 43 refs., 4 figs., 24 tabs

76 FR 55391 - Notice of Postponement of Release of Draft NTP Monograph on Potential Developmental Effects of...

Science.gov (United States)

2011-09-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Notice of Postponement of Release of Draft NTP Monograph... Review Draft Monograph AGENCY: Division of the National Toxicology Program (DNTP), National Institute of... NTP monograph and peer review panel meeting. SUMMARY: The NTP is postponing the release of the Draft...

Mathematical Model and Program for the Sizing of Counter-flow Natural Draft Wet Cooling Towers

Directory of Open Access Journals (Sweden)

Victor-Eduard Cenușă

2017-08-01

Full Text Available Assuring the necessary temperature and mass flow rate of the cooling water to the condenser represents an essential condition for the efficient operation of a steam power plant. The paper presents equations which describe the physical phenomena and the mathematical model for the design of counter-flow natural draft wet cooling towers. Following is given the flow-chart of the associated computer program. A case study is made to show the results of the computer program and emphasize the interdependence between the main design parameters.

78 FR 68447 - Exposure Draft-Standards for Internal Control in the Federal Government

Science.gov (United States)

2013-11-14

... GOVERNMENT ACCOUNTABILITY OFFICE Exposure Draft--Standards for Internal Control in the Federal... revisions to the Standards for Internal Control in the Federal Government, known as the ``Green Book,'' to... proposed changes contained in the 2013 Exposure Draft update to the Standards for Internal Control in the...

Study of methodology diversification in diagnostics

International Nuclear Information System (INIS)

Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Hasegawa, Makoto

1999-03-01

There are several research activities to enhance safety and reliability of nuclear power plant operation and maintenance. We are developing a concept of an autonomous operation system where the role of operators is replaced with artificial intelligence. The purpose of the study described in this report is to develop a operator support system in abnormal plant situations. Conventionally, diagnostic modules based on individual methodology such as expert system have been developed and verified. In this report, methodology diversification is considered to integrate diagnostic modules which performance are confirmed using information processing technique. Technical issues to be considered in diagnostic methodology diversification are; 1)reliability of input data, 2)diversification of knowledge models, algorithms and reasoning schemes, 3)mutual complement and robustness. The diagnostic module utilizing the different approaches defined along with strategy of diversification was evaluated using fast breeder plant simulator. As a result, we confirmed that any singular diagnostic module can not meet accuracy criteria for the entire set of anomaly events. In contrast with this, we confirmed that every abnormality could be precisely diagnosed by a mutual combination. In other words, legitimacy of approach selected by strategy of diversification was shown, and methodology diversification attained clear efficiency for abnormal diagnosis. It has been also confirmed that the diversified diagnostic system implemented in this study is able to maintain its accuracy even in case that encountered scale of abnormality is different from reference cases embedded in the knowledge base. (author)

Transportation operations functions of the federal waste management system

International Nuclear Information System (INIS)

Shappert, L.B.; Klimas, M.J.

1989-01-01

This paper documents the functions that are necessary to operate the OCRWM transportation system. OCRWM's mission is to accept and transport spent fuel and high-level waste from waste generators to FWMS facilities. The emphasis is on transportation operations and assumes that all necessary facilities are in place and equipment designs and specifications are available to permit the system to operate properly. The information reported in this paper was developed for TOPO and is compatible with the draft revision of the Waste Management System Requirements and Description (SRD). 5 refs

75 FR 65293 - Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for...

Science.gov (United States)

2010-10-22

...] Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for... Requirements for the Registration of Veterinary Medicinal Products (VICH) has developed a draft guideline titled ``Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for Transfer of Data...

Bosnian Draft of the law on the conversion of Swiss-francs loans: Critical review

Directory of Open Access Journals (Sweden)

Popović Igor

2016-01-01

Full Text Available Firstly, the author explains what motivated him to write this article, because Swiss-francs loans issue is very important for almost all Balkans states. After that, the essence of Swiss-francs loans is explained and what caused litigations relating to the nullity of these loans agreements. Courts are of the opinion that these agreements are legal and valid. They point out that currency clauses within these agreements are lawful and valid. Such courts' conclusion is a premise on which rests this article. The author emphasizes that subject of this article is not whether currency clauses regarding mentioned loans are lawful or not, but whether the Draft of the law on the conversion of Swiss-francs loans is constitutional and legitimate. The author explains the content of the mentioned Draft, especially the method of the intended conversion. Essence of the proposed conversion is as follows - conversion of Swiss-francs loans into the local currency (convertible mark at rates which had existed at the moment of the conclusion of an agreement. The author points to the vagueness of the Draft provisions and the possible problems that may arise in its application, if enacted. Next and main part of the article concerns the potential retroactive application of the Draft provisions. Draft covers all loans agreements, i.e. agreements which have ever been concluded, regardless of whether they are no longer in force. Thus, main effect of the Draft would be retroactive application of its provisions. Retroactivity undermines principle of legal certainty and to some extent principle of separation of powers, since courts have confirmed validity of the mentioned agreements. Draft, also, places all negative effects of rates exchange on creditors (banks, meaning that the question of proportionality could arise. Thus, the author argues that enactment of the Draft in proposed capacity would probably violate the principle of non-retroactive application of law and

75 FR 984 - Draft Recommended Interim Preliminary Remediation Goals for Dioxin in Soil at CERCLA and RCRA Sites

Science.gov (United States)

2010-01-07

...The Environmental Protection Agency (EPA or the Agency) is announcing a 50-day public comment period for draft recommended interim preliminary remediation goals (PRGs) developed in the Draft Recommended Interim Preliminary Remediation Goals for Dioxin in Soil at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and Resource Conservation and Recovery Act (RCRA) Sites. EPA's Office of Solid Waste and Emergency and Emergency Response (OSWER) has developed the draft recommended interim PRGs for dioxin in soil. These draft recommended interim PRGs were calculated using existing, peer- reviewed toxicity values and current EPA equations and default exposure assumptions. This Federal Register notice is intended to provide an opportunity for public comment on the draft recommended interim PRGs. EPA will consider any public comments submitted in accordance with this notice and may revise the draft recommended interim PRGs thereafter.

Draft environmental statement. Homestake Mining Company: Homestake Mining Company Pitch Project (Saguache County, Colorado)

International Nuclear Information System (INIS)

1978-01-01

The draft concerns the proposed issuance of approvals, permits, and licenses to the Homestake Mining Company for the implementation of the Pitch Project. The Pitch Project consists of mining and milling operations involving uranium ore deposits located in Gunnison National Forest, Saguache County, Colorado. Mining of uranium ore will take place over an estimated period of 20 years; a mill with a nominal capacity of 544 metric tons per day (600 tons per day) will be constructed and operated as long as ore is available. The waste material (tailings) from the mill, also produced at a rate of about 544 metric tons per day (600 tons per day), will be buried onsite at the head end of a natural valley. The environmental impacts are summarized in sections on the existing environment, applicant's proposed mining and milling operation, environmental effects of accidents, monitoring programs, productivity, commitment of resources, alternatives, and cost-benefit evaluation

Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

Science.gov (United States)

1981-02-01

Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

A methodology of selection of exercises for operator training on a control room simulator and its application to the data bank of exercises at the Dukovany NPP

International Nuclear Information System (INIS)

Holy, J.

2005-07-01

The report describes the preparation of methodology for the selection of scenarios to be used during operator training on a full-scope simulator. The scenarios are selected from a data bank of scenarios, which is under preparation based on feedback from the operational history and theoretical analyses. The new methodology takes into account 3 basic attributes defining the priority for use within the training programme: frequency of occurrence, safety-related significance, and difficulty. The attributes are scored and based on a joint score, the importance of inclusion of the scenario in the training programme is also scored. The methodology was applied to the data bank of scenarios for simulation of abnormal states and incidents trained on the up-to-date simulator of the Dukovany NPP, and the results of this pilot application were made available to Dukovany operator training staff as a tool for the preparation of training plans for the years to come. The results of a PSA study are used for a non-trivial selection of the scenarios

77 FR 40586 - Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter...

Science.gov (United States)

2012-07-10

...-01] Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter... Technology (NIST) seeks comments on Draft NISTIR 7823, Advanced Metering Infrastructure Smart Meter... conformance test requirements for the firmware upgradeability process for the Advanced Metering Infrastructure...

Impact of the draft DOE Training and Qualification Standard on an established training and qualification program

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1999-01-01

One of the provisions of Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2 was that the US Department of Energy (DOE) hor e llipsis Develop and institute ahor e llipsiscourse in criticality and criticality safety hor e llipsis to serve as the foundation for a program of formal qualification of criticality engineers. In response, a draft DOE standard establishing requirements for a formal qualification program for nuclear criticality safety (NCS) engineers has been prepared and is currently in review. The Oak Ridge Y-12 plant implemented a formal training and qualification program for NCS engineers in 1995. The program complies with existing DOE requirements. The program was developed using a performance-based systematic approach to training and is accomplished through structured mentoring where experienced personnel interact with candidates through various learning exercises. Self-study, exercises, and work under instruction are all utilized. The candidate's performance is evaluated by mentors and oral boards. Competency gained through experience at other sites can also be credited. Technical portions of the program are primarily contained in an initial Engineer-in-Training segment and in subsequent task-specific qualifications. The Engineer-in-Training segment exposes the candidate to fundamental NCS concepts through example problems; ensures the initial compliance training requirements are met; and includes readings from applicable procedures, technical documents, and standards. Upon completion of this initial training, candidates proceed to task qualifications. Tasks are defined NCS activities such as operational reviews, criticality safety evaluations, criticality safety computations, criticality accident alarm system (CAAS) evaluations, support for emergency management, etc. Qualification on a task basis serves to break up training into manageable pieces and expedites qualification of candidates to perform specific production activities. The

78 FR 40199 - Draft Spent Fuel Storage and Transportation Interim Staff Guidance

Science.gov (United States)

2013-07-03

.... ML13056A516. NRC's PDR: You may examine and purchase copies of public documents at the NRC's PDR, Room O1-F21... current or future applicants The NRC staff has no intention to impose the draft ISG positions on existing... of the effective date of this guidance The NRC staff has no intention to impose the draft ISG...

Draft IAEA Action Plan on Nuclear Safety. Report by the Director General

International Nuclear Information System (INIS)

Amano, Y.

2011-01-01

In accordance with paragraphs 23 and 24 of the Declaration adopted by the Ministerial Conference on Nuclear Safety held on 20-24 June 2011, the Director General was requested to prepare and present to the Board of Governors and the General Conference at their September 2011 meetings a report on the Ministerial Conference and a draft Action Plan, building on the Ministerial Declaration, the conclusions and recommendations of the working sessions of the Ministerial Conference and the expertise and knowledge available therein, and to facilitate consultations among Member States on the draft Action Plan. This draft Action Plan is the result of an extensive process of consultations with Member States and responds to the request contained in the Ministerial Declaration.

Coupling model and solving approach for performance evaluation of natural draft counter-flow wet cooling towers

Directory of Open Access Journals (Sweden)

Wang Wei

2016-01-01

Full Text Available When searching for the optimum condenser cooling water flow in a thermal power plant with natural draft cooling towers, it is essential to evaluate the outlet water temperature of cooling towers when the cooling water flow and inlet water temperature change. However, the air outlet temperature and tower draft or inlet air velocity are strongly coupled for natural draft cooling towers. Traditional methods, such as trial and error method, graphic method and iterative methods are not simple and efficient enough to be used for plant practice. In this paper, we combine Merkel equation with draft equation, and develop the coupled description for performance evaluation of natural draft cooling towers. This model contains two inputs: the cooling water flow, the inlet cooling water temperature and two outputs: the outlet water temperature, the inlet air velocity, equivalent to tower draft. In this model, we furthermore put forward a soft-sensing algorithm to calculate the total drag coefficient instead of empirical correlations. Finally, we design an iterative approach to solve this coupling model, and illustrate three cases to prove that the coupling model and solving approach proposed in our paper are effective for cooling tower performance evaluation.

Improving operating room efficiency in academic children's hospital using Lean Six Sigma methodology.

Science.gov (United States)

Tagge, Edward P; Thirumoorthi, Arul S; Lenart, John; Garberoglio, Carlos; Mitchell, Kenneth W

2017-06-01

Lean Six Sigma (LSS) is a process improvement methodology that utilizes a collaborative team effort to improve performance by systematically identifying root causes of problems. Our objective was to determine whether application of LSS could improve efficiency when applied simultaneously to all services of an academic children's hospital. In our tertiary academic medical center, a multidisciplinary committee was formed, and the entire perioperative process was mapped, using fishbone diagrams, Pareto analysis, and other process improvement tools. Results for Children's Hospital scheduled main operating room (OR) cases were analyzed, where the surgical attending followed themselves. Six hundred twelve cases were included in the seven Children's Hospital operating rooms (OR) over a 6-month period. Turnover Time (interval between patient OR departure and arrival of the subsequent patient) decreased from a median 41min in the baseline period to 32min in the intervention period (p<0.0001). Turnaround Time (interval between surgical dressing application and subsequent surgical incision) decreased from a median 81.5min in the baseline period to 71min in the intervention period (p<0.0001). These results demonstrate that a coordinated multidisciplinary process improvement redesign can significantly improve efficiency in an academic Children's Hospital without preselecting specific services, removing surgical residents, or incorporating new personnel or technology. Prospective comparative study, Level II. Copyright © 2017 Elsevier Inc. All rights reserved.

Comments from the Behavioral Teratology Committee of the Japanese Teratology Society on OECD guideline for the testing of chemicals, proposal for a new guideline 426, developmental neurotoxicity study, draft document (September 2003).

Science.gov (United States)

Fukui, Yoshihiro; Ema, Makoto; Fujiwara, Michio; Higuchi, Hashihiro; Inouye, Minoru; Iwase, Takayuki; Kihara, Takahide; Nishimura, Tatsuya; Oi, Akihide; Ooshima, Yojiro; Otani, Hiroki; Shinomiya, Mitsuhiro; Sugioka, Kozo; Yamano, Tsunekazu; Yamashita, Keisuke H; Tanimura, Takashi

2004-09-01

In September 2003, a new revision of the draft guideline (Organization for Economic Co-operation and Development [OECD] Guideline for the Testing of Chemicals, Proposal for a New Guideline 426, Developmental Neurotoxicity Study) was distributed. The draft guideline consists of 51 paragraphs and an appendix. The National Coordinators were requested to arrange national expert reviews of the guideline proposal in their member countries. The member of the Behavioral Teratology (BT) Committee of the Japanese Teratology Society (JTS) reviewed, discussed and commented on the draft Test Guideline proposal. The BT Committee of the JTS also commented that the International Collaborative Study to validate this protocol should be definitely performed. These comments were sent to the OECD Secretariat. The BT Committee of the JTS expects that the comments are useful for further discussion.

Draft Genome Sequence of an Active Heterotrophic Nitrifier-Denitrifier, Cupriavidus pauculus UM1

OpenAIRE

Putonti, Catherine; Polley, Nathaniel; Castignetti, Domenic

2018-01-01

ABSTRACT Here, we present the draft genome sequence of Cupriavidus pauculus UM1, a metal-resistant heterotrophic nitrifier-denitrifier capable of synthesizing nitrite from pyruvic oxime. The size of the genome is 7,402,815 bp with a GC content of 64.8%. This draft assembly consists of 38 scaffolds.

Evaluation of mercury speciation by EPA (Draft) Method 29

Energy Technology Data Exchange (ETDEWEB)

Laudal, D.L.; Heidt, M.K. [Energy & Environmental Research Center, Grand Forks, ND (United States); Nott, B. [Electric Power Research Institute, Palo Alto, CA (United States)

1995-11-01

The 1990 Clean Air Act Amendments require that the U.S. Environmental protection Agency (EPA) assess the health risks associated with mercury emissions. Also, the law requires a separate assessment of health risks posed by the emission of 189 tract chemicals (including mercury) for electric utility steam-generating units. In order to conduct a meaningful assessment of health and environmental effects, we must have, among other things, a reliable and accurate method to measure mercury emissions. In addition, the rate of mercury deposition and the type of control strategies used may depend upon the type of mercury emitted (i.e., whether it is in the oxidized or elemental form). It has been speculated that EPA (Draft) Method 29 can speciate mercury by selective absorption; however, this claim has yet to be proven. The Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) have contracted with the Energy & Environmental Research Center (EERC) at University of North Dakota to evaluate EPA (Draft) Method 29 at the pilot-scale level. The objective of the work is to determine whether EPA (Draft) Method 29 can reliably quantify and speciate mercury in the flue gas from coal-fired boilers.

75 FR 21650 - Coral Reef Restoration Plan, Draft Programmatic Environmental Impact Statement, Biscayne National...

Science.gov (United States)

2010-04-26

... DEPARTMENT OF THE INTERIOR National Park Service Coral Reef Restoration Plan, Draft Programmatic... Coral Reef Restoration Plan, Biscayne National Park. SUMMARY: Pursuant to the National Environmental... availability of a Draft Programmatic Environmental Impact Statement (DEIS) for the Coral Reef Restoration Plan...

Vortex rope instabilities in a model of conical draft tube

Science.gov (United States)

Skripkin, Sergey; Tsoy, Mikhail; Kuibin, Pavel; Shtork, Sergey

2017-10-01

We report on experimental studies of the formation of vortex ropes in a laboratory simplified model of hydroturbine draft tube. Work is focused on the observation of various flow patterns at the different rotational speed of turbine runner at fixed flow rate. The measurements involve high-speed visualization and pressure pulsations recordings. Draft tube wall pressure pulsations are registered by pressure transducer for different flow regimes. Vortex rope precession frequency were calculated using FFT transform. The experiments showed interesting features of precessing vortex rope like twin spiral and formation of vortex ring.

Vortex rope instabilities in a model of conical draft tube

Directory of Open Access Journals (Sweden)

Skripkin Sergey

2017-01-01

Full Text Available We report on experimental studies of the formation of vortex ropes in a laboratory simplified model of hydroturbine draft tube. Work is focused on the observation of various flow patterns at the different rotational speed of turbine runner at fixed flow rate. The measurements involve high-speed visualization and pressure pulsations recordings. Draft tube wall pressure pulsations are registered by pressure transducer for different flow regimes. Vortex rope precession frequency were calculated using FFT transform. The experiments showed interesting features of precessing vortex rope like twin spiral and formation of vortex ring.

Draft Surrogacy (Regulation Bill 2016: Rhetoric or Surrogate-centric?

Directory of Open Access Journals (Sweden)

Rituparna Bhattacharyya

2016-11-01

Full Text Available Chaired by honourable Prime Minister, Mr. Narendra Damodar Modi, the Union Cabinet on 24 August 2016 introduced and approved the draft bill on Assisted Reproductive Technologies (ART in India, known popularly as the Surrogacy (Regulation Bill, 2016. The bill aims at regulating the ever-proliferating unregulated surrogacy industry interalia banning commercial surrogacy services for single parents, homosexuals, cohabiting partners in addition to foreigners and overseas citizens of India. The key aim of this commentary is to make a nuanced examination of the draft bill aimed at gaining a deeper understanding of the practice of surrogacy and address gaps (if any that require interventions.

Methodology for the identification of the factors that can influence the performance of operators of nuclear power plants control room under emergency situations

International Nuclear Information System (INIS)

Paiva, Bernardo Spitz; Santos, Isaac J.A. Luquetti

2009-01-01

In order to minimize the human errors of the operators in a nuclear power plan control room, during emergency situations, it has to be considered the factors which affect the human performance. Work situations adequately projected, compatible with the necessities, capacities and human limitations, taking into consideration the factors which affect the operator performance . This paper aims to develop a methodology for identification of the factors affecting the operator performance under emergency situation, using the aspects defined by the human reliability analysis focusing the judgment done by specialists

Pipe drafting and design

CERN Document Server

Parisher, Roy A; Parisher

2000-01-01

Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

Runway Operations Planning: A Two-Stage Solution Methodology

Science.gov (United States)

Anagnostakis, Ioannis; Clarke, John-Paul

2003-01-01

The airport runway is a scarce resource that must be shared by different runway operations (arrivals, departures and runway crossings). Given the possible sequences of runway events, careful Runway Operations Planning (ROP) is required if runway utilization is to be maximized. Thus, Runway Operations Planning (ROP) is a critical component of airport operations planning in general and surface operations planning in particular. From the perspective of departures, ROP solutions are aircraft departure schedules developed by optimally allocating runway time for departures given the time required for arrivals and crossings. In addition to the obvious objective of maximizing throughput, other objectives, such as guaranteeing fairness and minimizing environmental impact, may be incorporated into the ROP solution subject to constraints introduced by Air Traffic Control (ATC) procedures. Generating optimal runway operations plans was approached in with a 'one-stage' optimization routine that considered all the desired objectives and constraints, and the characteristics of each aircraft (weight class, destination, Air Traffic Control (ATC) constraints) at the same time. Since, however, at any given point in time, there is less uncertainty in the predicted demand for departure resources in terms of weight class than in terms of specific aircraft, the ROP problem can be parsed into two stages. In the context of the Departure Planner (OP) research project, this paper introduces Runway Operations Planning (ROP) as part of the wider Surface Operations Optimization (SOO) and describes a proposed 'two stage' heuristic algorithm for solving the Runway Operations Planning (ROP) problem. Focus is specifically given on including runway crossings in the planning process of runway operations. In the first stage, sequences of departure class slots and runwy crossings slots are generated and ranked based on departure runway throughput under stochastic conditions. In the second stage, the

75 FR 63851 - Draft Friends Organizations Policy

Science.gov (United States)

2010-10-18

...] Draft Friends Organizations Policy AGENCY: Fish and Wildlife Service, Department of the Interior. ACTION... Service's mission through partnerships with Friends organizations (volunteer/advocate). Today, Friends organizations play a vital role in helping to fulfill the Service's mission of ``working with others, to...

Draft Test Guideline: Aquatic Food Chain Transfer

Science.gov (United States)

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Drafting & Design Technology. Technical Committee Report.

Science.gov (United States)

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

A methodology for estimating potential doses and risks from recycling U.S. Department of Energy radioactive scrap metals

International Nuclear Information System (INIS)

MacKinney, J.A.

1995-01-01

The U.S. Environmental Protection Agency (EPA) is considering writing regulations for the controlled use of materials originating from radioactively contaminated zones which may be recyclable. These materials include metals, such as steel (carbon and stainless), nickel, copper, aluminum and lead, from the decommissioning of federal, and non-federal facilities. To develop criteria for the release of such materials, a risk analysis of all potential exposure pathways should be conducted. These pathways include direct exposure to the recycled material by the public and workers, both individual and collective, as well as numerous other potential exposure pathways in the life of the material. EPA has developed a risk assessment methodology for estimating doses and risks associated with recycling radioactive scrap metals. This methodology was applied to metal belonging to the U.S. Department of Energy. This paper will discuss the draft EPA risk assessment methodology as a tool for estimating doses and risks from recycling. (author)

76 FR 12712 - Announcing Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity...

Science.gov (United States)

2011-03-08

...-02] Announcing Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity..., ``Personal Identity Verification of Federal Employees and Contractors Standard.'' Draft FIPS 201-2 amends... Issuing Personal Identity Verification Cards under HSPD-12.'' The purpose of this change is to update the...

77 FR 38824 - Winter Use Plan, Supplemental Draft Environmental Impact Statement, Yellowstone National Park

Science.gov (United States)

2012-06-29

... DEPARTMENT OF THE INTERIOR National Park Service [2310-0070-422] Winter Use Plan, Supplemental.... ACTION: Notice of Availability of the Draft Supplemental Environmental Impact Statement for the Winter... Supplemental Environmental Impact Statement (Draft SEIS) for a Winter Use Plan for Yellowstone National Park...

Draft 1992 Resource Program : Technical Report.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1992-01-01

The 1992 Resource Program will propose actions to meet future loads placed on the Bonneville Power Administration (BPA). It will also discuss and attempt to resolve resource-related policy issues. The Resource Program assesses resource availability and costs, and analyzes resource requirements and alternative ways of meeting those requirements through both conservation and generation resources. These general resource conclusions are then translated to actions for both conservation and generation. The Resource Program recommends budgets for the Office of Energy Resources for Fiscal Years (FY) 1994 and 1995. BPA's Resource Program bears directly on an important BPA responsibility: the obligation under the Northwest Power Act{sup 3} to meet the power requirements of public and private utility and direct service industrial (DSI) customers according to their contractual agreements. BPA's Draft 1992 Resource Program is contained in four documents: (1) 1992 Resource Program Summary; (2) Technical Report; (3) Technical Assumptions Appendix; and, (4) Conservation Implementation Plan. This volume is the Draft 1992 Resource Program Technical Report, a comprehensive document that provides supporting data and analyses for Resource Program recommendations.

Draft 1992 Resource Program : Technical Report.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1992-01-01

The 1992 Resource Program will propose actions to meet future loads placed on the Bonneville Power Administration (BPA). It will also discuss and attempt to resolve resource-related policy issues. The Resource Program assesses resource availability and costs, and analyzes resource requirements and alternative ways of meeting those requirements through both conservation and generation resources. These general resource conclusions are then translated to actions for both conservation and generation. The Resource Program recommends budgets for the Office of Energy Resources for Fiscal Years (FY) 1994 and 1995. BPA`s Resource Program bears directly on an important BPA responsibility: the obligation under the Northwest Power Act{sup 3} to meet the power requirements of public and private utility and direct service industrial (DSI) customers according to their contractual agreements. BPA`s Draft 1992 Resource Program is contained in four documents: (1) 1992 Resource Program Summary; (2) Technical Report; (3) Technical Assumptions Appendix; and, (4) Conservation Implementation Plan. This volume is the Draft 1992 Resource Program Technical Report, a comprehensive document that provides supporting data and analyses for Resource Program recommendations.

Predictive Validity of National Basketball Association Draft Combine on Future Performance.

Science.gov (United States)

Teramoto, Masaru; Cross, Chad L; Rieger, Randall H; Maak, Travis G; Willick, Stuart E

2018-02-01

Teramoto, M, Cross, CL, Rieger, RH, Maak, TG, and Willick, SE. Predictive validity of national basketball association draft combine on future performance. J Strength Cond Res 32(2): 396-408, 2018-The National Basketball Association (NBA) Draft Combine is an annual event where prospective players are evaluated in terms of their athletic abilities and basketball skills. Data collected at the Combine should help NBA teams select right the players for the upcoming NBA draft; however, its value for predicting future performance of players has not been examined. This study investigated predictive validity of the NBA Draft Combine on future performance of basketball players. We performed a principal component analysis (PCA) on the 2010-2015 Combine data to reduce correlated variables (N = 234), a correlation analysis on the Combine data and future on-court performance to examine relationships (maximum pairwise N = 217), and a robust principal component regression (PCR) analysis to predict first-year and 3-year on-court performance from the Combine measures (N = 148 and 127, respectively). Three components were identified within the Combine data through PCA (= Combine subscales): length-size, power-quickness, and upper-body strength. As per the correlation analysis, the individual Combine items for anthropometrics, including height without shoes, standing reach, weight, wingspan, and hand length, as well as the Combine subscale of length-size, had positive, medium-to-large-sized correlations (r = 0.313-0.545) with defensive performance quantified by Defensive Box Plus/Minus. The robust PCR analysis showed that the Combine subscale of length-size was a predictor most significantly associated with future on-court performance (p ≤ 0.05), including Win Shares, Box Plus/Minus, and Value Over Replacement Player, followed by upper-body strength. In conclusion, the NBA Draft Combine has value for predicting future performance of players.

Electronic hand-drafting and picture management system.

Science.gov (United States)

Yang, Tsung-Han; Ku, Cheng-Yuan; Yen, David C; Hsieh, Wen-Huai

2012-08-01

The Department of Health of Executive Yuan in Taiwan (R.O.C.) is implementing a five-stage project entitled Electronic Medical Record (EMR) converting all health records from written to electronic form. Traditionally, physicians record patients' symptoms, related examinations, and suggested treatments on paper medical records. Currently when implementing the EMR, all text files and image files in the Hospital Information System (HIS) and Picture Archiving and Communication Systems (PACS) are kept separate. The current medical system environment is unable to combine text files, hand-drafted files, and photographs in the same system, so it is difficult to support physicians with the recording of medical data. Furthermore, in surgical and other related departments, physicians need immediate access to medical records in order to understand the details of a patient's condition. In order to address these problems, the Department of Health has implemented an EMR project, with the primary goal of building an electronic hand-drafting and picture management system (HDP system) that can be used by medical personnel to record medical information in a convenient way. This system can simultaneously edit text files, hand-drafted files, and image files and then integrate these data into Portable Document Format (PDF) files. In addition, the output is designed to fit a variety of formats in order to meet various laws and regulations. By combining the HDP system with HIS and PACS, the applicability can be enhanced to fit various scenarios and can assist the medical industry in moving into the final phase of EMR.

75 FR 76467 - Draft Concept for Government-Wide “ExpertNet” Platform and Process To Elicit Expert Public...

Science.gov (United States)

2010-12-08

... GENERAL SERVICES ADMINISTRATION [Docket 2010-0005; Sequence 14] Draft Concept for Government-Wide... from the public on a draft concept for next-generation citizen consultation, namely a government- wide..., 2011. Respondents are invited to provide comments about or edits directly to the draft of the concept...

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Chung, Chang Hyun; You, Young Woo; Kim, Yoon Ik; Yang, Hui Chang; Huh, Byeong Gill; Lee, Dong Won; Ahn, Gwan Won [Seoul National Univ., Seoul (Korea, Republic of)

2001-03-15

The purpose of this study IS the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of nuclear power plants. In this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested. Configuration control assessment methodology suggested in this study for the purpose of the development of configuration control methodology reflecting the characteristics of Korean NPPs, can be utilized as the supplement of current PSA methodologies.

Response to state comments on the revised draft northeastern regional characterization reports for the Crystalline Repository Project

International Nuclear Information System (INIS)

1985-08-01

The purpose of this document is to respond to the comments received from the States of the Northeastern Region on the revised draft Northeastern Regional Characterization Reports (RCRs). The responses in this document indicate the manner in which the suggestions or comments received have been considered in modifying the revised draft Northeastern RCRs. Both general comments related to the overall Crystalline Repository Project (CRP) and comments on specific sections of the RCRs are addressed. This document responds to Northeastern State comments on both the revised draft Northeastern Regional Geologic Characterization Report (RGCR) and the revised draft Northeastern Regional Environmental Characterization Report (RECR)

Response to state comments on the revised draft Southeastern Regional Characterization Reports for the Crystalline Repository Project

International Nuclear Information System (INIS)

1985-08-01

The purpose of this document is to respond to the comments received from the states of the Southeastern Region on the revised draft Southeastern Regional Characterization Reports (RCRs). The responses in this document indicate the manner in which the suggestions or comments received have been considered in modifying the revised draft Southeastern RCRs. Both general comments related to the overall Crystalline Repository Project (CRP) and comments on specific sections of the RCRs are addressed. This document responds to Southeastern State comments on both the revised draft Southeastern Regional Geologic Characterization Report (RGCR) and the revised draft Southeastern Regional Environmental Characterization Report (RECR)

78 FR 33848 - Draft Guidance for Industry on Human Immunodeficiency Virus-1 Infection: Developing...

Science.gov (United States)

2013-06-05

... Food and Drug Administration (FDA) is announcing the availability of a draft guidance for industry... draft guidance to the Division of Drug Information, Center for Drug Evaluation and Research, Food and... 20852. FOR FURTHER INFORMATION CONTACT: Jeffrey Murray, Center for Drug Evaluation and Research, Food...

77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

Science.gov (United States)

2012-04-25

...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in... Cosmetic Products.'' The draft guidance is intended to assist industry in identifying the potential safety...

Technical evaluation report of the Fort St. Vrain final draft upgraded technical specifications

International Nuclear Information System (INIS)

Kimura, C.Y.

1989-01-01

This report is a technical evaluation of the final draft of the Fort St. Vrain (FSV) Upgraded Technical Specifications (UT/S) as issued by Public Service of Colorado (PSC) on May 27, 1988 with subsequent supplemental updates issued on June 15, 1988 and August 5, 1988. It has been compared for consistency, and safety conservatism with the Fort St. Vrain (FSV) Updated Final Safety Analysis Report (FSAR), the FSV Safety Evaluation Report (SER), the Facility Operating License, DPR-34, and all amendments to the Facility Operating License issued as of June 1, 1988, and Appendix A to the Operating License DPR-34, Technical Specifications. Because of the age of the plant, no supplements to the Fort St. Vrain SER have been issued since the original SER was not issued as a WASH or a NUREG report. This made it necessary to review all amendments to the Facility Operating License since they would contain the safety evaluations done to support changes to the Facility Operating License. The upgraded Fort St. Vrain Technical Specifications were also broadly compared with the latest Westinghouse Standard Technical Specifications (WSTS) to assure that what was proposed for Fort St. Vrain was consistent with the latest NRC staff practices for standard technical specifications

Draft Genome of the Marine Gammaproteobacterium Halomonas titanicae

Science.gov (United States)

Sánchez-Porro, Cristina; de la Haba, Rafael R.; Cruz-Hernández, Norge; González, Juan M.; Reyes-Guirao, Cristina; Navarro-Sampedro, Laura; Carballo, Modesto

2013-01-01

Halomonas titanicae strain BH1 is a heterotrophic, aerobic marine bacterium which was isolated from rusticles of the RMS Titanic wreck. Here we report the draft genome sequence of this halophilic gammaproteobacterium. PMID:23516210

78 FR 65703 - Notice of Availability of the Idaho and Southwestern Montana Greater Sage-Grouse Draft Land Use...

Science.gov (United States)

2013-11-01

...] Notice of Availability of the Idaho and Southwestern Montana Greater Sage-Grouse Draft Land Use Plan... Environmental Impact Statement (EIS) for managing Greater Sage- Grouse (GRSG) in the Idaho and Southwestern... Southwestern Montana Greater Sage-Grouse Draft LUP Amendments/Draft EIS by any of the following methods: Email...

Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation

Directory of Open Access Journals (Sweden)

Girmanová Lenka

2017-12-01

Full Text Available The Six Sigma DMAIC can be considered a guide for problem solving and product or process improvement. The majority of companies start to implement Six Sigma using the DMAIC methodology. The paper deals with application of Six Sigma using the DMAIC methodology in the process of product quality control. The case study is oriented on the field of metallurgical operations. The goal of the Six Sigma project was to ensure the required metallurgic product quality and to avoid an increase in internal costs associated with poor product quality. In this case study, a variety of tools and techniques like flow chart, histogram, Pareto diagram, analysis of FMEA (Failure Mode and Effect Analysis data, cause and effect diagram, logical analysis was used. The Sigma level has improved by approximately 13%. The achieved improvements have helped to reduce the quantity of defective products and the processing costs (technology for re-adjusting. Benefits resulting from the DMAIC implementation can be divided into three levels: the qualitative, economic and safety level.

Outcomes from the regional Co-operation in the Area of the Safety Analysis Methodology

International Nuclear Information System (INIS)

D'Auria, F.; Mavko, B.; Prosek, A.; Debrecin, N.; Bajs, T.

2000-01-01

International Atomic Energy Agency (IAEA) carried out the Co-ordinated Research Program (CRP) ON V alidation of Accident and Safety Analysis Methodology'' in the period between 1995 and 1998. Three areas of interest identified by the participants referred to the pressurised water reactors of Western and Eastern type (PWR and WWER type). The specific areas of attention were: system behaviour of the primary and secondary loops (PS area), the containment response (CO area) and the severe accidents (SA area). During the CRP it became clear that the technology advancements, the available tools (i.e. codes) and the experimental databases in the above areas are quite different. At the conclusion of the CRP, all objectives of the program have been reached. This paper presents the summary of the regional co-operation in this framework. The CRP activities focused on the codes and expertise available at the participating organisations. This overview therefore summarises their experience related to the state-of-the-art in the field of computational accident analysis. In addition, the paper proposes the recommendations for future activities related to the code usage, the user effects and code development. In pursuing of these goals special attention is given to the importance of the international co-operation. (author)

Pipe drafting and design

CERN Document Server

Parisher, Roy A

2011-01-01

Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

Draft Genome Sequence of an Active Heterotrophic Nitrifier-Denitrifier, Cupriavidus pauculus UM1.

Science.gov (United States)

Putonti, Catherine; Polley, Nathaniel; Castignetti, Domenic

2018-02-08

Here, we present the draft genome sequence of Cupriavidus pauculus UM1, a metal-resistant heterotrophic nitrifier-denitrifier capable of synthesizing nitrite from pyruvic oxime. The size of the genome is 7,402,815 bp with a GC content of 64.8%. This draft assembly consists of 38 scaffolds. Copyright © 2018 Putonti et al.

Draft Genome Sequence of Desulfuromonas acetexigens Strain 2873, a Novel Anode-Respiring Bacterium

KAUST Repository

Katuri, Krishna

2017-03-03

Here, we report the draft genome sequence of Desulfuromonas acetexigens strain 2873, which was originally isolated from digester sludge from a sewage treatment plant in Germany. This bacterium is capable of anode respiration with high electrochemical activity in microbial electrochemical systems. The draft genome contains 3,376 predicted protein-coding genes and putative multiheme c-type cytochromes.

Draft Genome Sequence of Desulfuromonas acetexigens Strain 2873, a Novel Anode-Respiring Bacterium

KAUST Repository

Katuri, Krishna; Albertsen, Mads; Saikaly, Pascal

2017-01-01

Here, we report the draft genome sequence of Desulfuromonas acetexigens strain 2873, which was originally isolated from digester sludge from a sewage treatment plant in Germany. This bacterium is capable of anode respiration with high electrochemical activity in microbial electrochemical systems. The draft genome contains 3,376 predicted protein-coding genes and putative multiheme c-type cytochromes.

77 FR 8890 - Clarks River National Wildlife Refuge, KY; Draft Comprehensive Conservation Plan and...

Science.gov (United States)

2012-02-15

... boundaries would be based on importance of the habitat for target management species. We would offer....fws.gov planning under ``Draft Documents.'' Comments on the Draft CCP/EA may be submitted to the above..., advancement, management, conservation, and protection of fish and wildlife resources. Approximately 74 percent...

Methodological practicalities in analytical generalization

DEFF Research Database (Denmark)

Halkier, Bente

2011-01-01

generalization. Theoretically, the argumentation in the article is based on practice theory. The main part of the article describes three different examples of ways of generalizing on the basis of the same qualitative data material. There is a particular focus on describing the methodological strategies......In this article, I argue that the existing literature on qualitative methodologies tend to discuss analytical generalization at a relatively abstract and general theoretical level. It is, however, not particularly straightforward to “translate” such abstract epistemological principles into more...... operative methodological strategies for producing analytical generalizations in research practices. Thus, the aim of the article is to contribute to the discussions among qualitatively working researchers about generalizing by way of exemplifying some of the methodological practicalities in analytical...

78 FR 46598 - Notice of Availability of the Draft Rob Jaggers Camping Area Business Plan and Expanded Amenity...

Science.gov (United States)

2013-08-01

... Availability of the Draft Rob Jaggers Camping Area Business Plan and Expanded Amenity Fee Schedule for the Fort... the Draft Rob Jaggers Camping Area Business Plan and Expanded Amenity Fee Schedule. The Rob Jaggers... comments will be considered, the BLM must receive written comments on the Draft Business Plan by December...

A study on the operator's errors of commission (EOC) in accident scenarios of nuclear power plants: methodology development and application

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Whan; Jung, Won Dea; Park, Jin Kyun; Kang, Da Il

2003-04-01

As the concern on the operator's inappropriate interventions, the so-called Errors Of Commission (EOCs), that can exacerbate the plant safety has been raised, much of interest in the identification and analysis of EOC events from the risk assessment perspective has been increased. Also, one of the items in need of improvement for the conventional PSA and HRA that consider only the system-demanding human actions is the inclusion of the operator's EOC events into the PSA model. In this study, we propose a methodology for identifying and analysing human errors of commission that might be occurring from the failures in situation assessment and decision making during accident progressions given an initiating event. In order to achieve this goal, the following research items have been performed: Firstly, we analysed the error causes or situations contributed to the occurrence of EOCs in several incidents/accidents of nuclear power plants. Secondly, limitations of the advanced HRAs in treating EOCs were reviewed, and a requirement for a new methodology for analysing EOCs was established. Thirdly, based on these accomplishments a methodology for identifying and analysing EOC events inducible from the failures in situation assessment and decision making was proposed and applied to all the accident sequences of YGN 3 and 4 NPP which resulted in the identification of about 10 EOC situations.

Simulations of the vortex in the Dellenback abrupt expansion, resembling a hydro turbine draft tube operating at part-load

International Nuclear Information System (INIS)

Nilsson, H

2012-01-01

This work presents an OpenFOAM case-study, based on the experimental studies of the swirling flow in the abrupt expansion by Dellenback et al.[1]. The case yields similar flow conditions as those of a helical vortex rope in a hydro turbine draft tube working at part-load. The case-study is set up similar to the ERCOFTAC Conical Diffuser and Centrifugal Pump OpenFOAM case-studies [2,3], making all the files available and the results fully reproducable using OpenSource software. The mesh generation is done using m4 scripting and the OpenFOAM built-in blockMesh mesh generator. The swirling inlet boundary condition is specified as an axi-symmetric profile. The outlet boundary condition uses the zeroGradient condition for all variables except for the pressure, which uses the fixed mean value boundary condition. The wall static pressure is probed at a number of locations during the simulations, and post-processing of the time-averaged solution is done using the OpenFOAM sample utility. Gnuplot scripts are provided for plotting the results. The computational results are compared to one of the operating conditions studied by Dellenback, and measurements for all the experimentally studied operating conditions are available in the case-study. Results from five cases are here presented, based on the kEpsilon model, the kOmegaSST model, and a filtered version of the same kOmegaSST model, named kOmegaSSTF [4,5]. Two different inlet boundary conditions are evaluated. It is shown that kEpsilon and kOmegaSST give steady solutions, while kOmegaSSTF gives a highly unsteady solution. The time-averaged solution of the kOmegaSSTF model is much more accurate than the other models. The kEpsilon and kOmegaSST models are thus unable to accurately model the effect of the large-scale unsteadiness, while kOmegaSSTF resolves those scales and models only the smaller scales. The use of two different boundary conditions shows that the boundary conditions are more important than the choice between

Concept of CFD model of natural draft wet-cooling tower flow

Directory of Open Access Journals (Sweden)

Hyhlík T.

2014-03-01

Full Text Available The article deals with the development of CFD model of natural draft wet-cooling tower flow. The physical phenomena taking place within a natural draft wet cooling tower are described by the system of conservation law equations along with additional equations. The heat and mass transfer in the counterflow wet-cooling tower fill are described by model [1] which is based on the system of ordinary differential equations. Utilization of model [1] of the fill allows us to apply commonly measured fill characteristics as shown by [2].The boundary value problem resulting from the fill model is solved separately. The system of conservation law equations is interlinked with the system of ordinary differential equations describing the phenomena occurring in the counterflow wet-cooling tower fill via heat and mass sources and via boundary conditions. The concept of numerical solution is presented for the quasi one dimensional model of natural draft wet-cooling tower flow. The simulation results are shown.

Application of ranging technique of radar level meter for draft survey

Directory of Open Access Journals (Sweden)

SHEN Yijun

2017-12-01

Full Text Available [Objectives] This paper aims to solve the problems of the high subjectivity and low accuracy and efficiency of draft surveying relying on human visual inspection.[Methods] Radar-level oil and liquid measurement technology products are widely used in the petrochemical industry. A device is developed that uses radar to survey the draft of a boat, designed with data series optimization formulae to ensure that the data results are true and correct. At the same time, a test is designed to prove the accuracy of the results.[Results] According to the conditions of the ship,the device is composed of a radar sensor, triangular bracket and display,and is put to use in the test.[Conclusions] With 15 vessels as the research objects,the comparison experiment shows a difference in range between 0.001-0.022 meters, with an average difference rate of 0.028%, which meets the requirements for ship draft survey accuracy.

Draft Genome Sequence of Type Strain Streptococcus gordonii ATCC 10558

DEFF Research Database (Denmark)

Rasmussen, Louise Hesselbjerg; Dargis, Rimtas; Christensen, Jens Jørgen Elmer

2016-01-01

Streptococcus gordonii ATCC 10558T was isolated from a patient with infective endocarditis in 1946 and announced as a type strain in 1989. Here, we report the 2,154,510-bp draft genome sequence of S. gordonii ATCC 10558T. This sequence will contribute to knowledge about the pathogenesis of infect......Streptococcus gordonii ATCC 10558T was isolated from a patient with infective endocarditis in 1946 and announced as a type strain in 1989. Here, we report the 2,154,510-bp draft genome sequence of S. gordonii ATCC 10558T. This sequence will contribute to knowledge about the pathogenesis...

SMART performance analysis methodology

International Nuclear Information System (INIS)

Lim, H. S.; Kim, H. C.; Lee, D. J.

2001-04-01

To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

Monitoring and diagnosis for sensor fault detection using GMDH methodology

International Nuclear Information System (INIS)

Goncalves, Iraci Martinez Pereira

2006-01-01

The fault detection and diagnosis system is an Operator Support System dedicated to specific functions that alerts operators to sensors and actuators fault problems, and guide them in the diagnosis before the normal alarm limits are reached. Operator Support Systems appears to reduce panels complexity caused by the increase of the available information in nuclear power plants control room. In this work a Monitoring and Diagnosis System was developed based on the GMDH (Group Method of Data Handling) methodology. The methodology was applied to the IPEN research reactor IEA-R1. The system performs the monitoring, comparing GMDH model calculated values with measured values. The methodology developed was firstly applied in theoretical models: a heat exchanger model and an IPEN reactor theoretical model. The results obtained with theoretical models gave a base to methodology application to the actual reactor operation data. Three GMDH models were developed for actual operation data monitoring: the first one using just the thermal process variables, the second one was developed considering also some nuclear variables, and the third GMDH model considered all the reactor variables. The three models presented excellent results, showing the methodology utilization viability in monitoring the operation data. The comparison between the three developed models results also shows the methodology capacity to choose by itself the best set of input variables for the model optimization. For the system diagnosis implementation, faults were simulated in the actual temperature variable values by adding a step change. The fault values correspond to a typical temperature descalibration and the result of monitoring faulty data was then used to build a simple diagnosis system based on fuzzy logic. (author)

A Novel Performance Framework and Methodology to Analyze the Impact of 4D Trajectory Based Operations in the Future Air Traffic Management System

OpenAIRE

Ruiz, Sergio; Lopez Leones, Javier; Ranieri, Andrea

2018-01-01

The introduction of new Air Traffic Management (ATM) concepts such as Trajectory Based Operations (TBO) may produce a significant impact in all performance areas, that is, safety, capacity, flight efficiency, and others. The performance framework in use today has been tailored to the operational needs of the current ATM system and must evolve to fulfill the new needs and challenges brought by the TBO content. This paper presents a novel performance assessment framework and methodology adapted...

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chang Hyeon; Yu, Yeong Woo; Cho, Jae Seon; Kim, Ju Yeol; Kim, Yun Ik; Yang, Hui Chang; Park, Gang Min; Hur, Byeong Gil [Seoul National Univ., Seoul (Korea, Republic of)

1999-03-15

The purpose of this study is the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of Nuclear Power Plant. The development of this methodology can contribute to enhance safety. In the first year of this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested.

78 FR 35940 - Content of Premarket Submissions for Management of Cybersecurity in Medical Devices; Draft...

Science.gov (United States)

2013-06-14

...] Content of Premarket Submissions for Management of Cybersecurity in Medical Devices; Draft Guidance for... draft guidance entitled ``Content of Premarket Submissions for Management of Cybersecurity in Medical Devices.'' This guidance identifies cybersecurity issues that manufacturers should consider in preparing...

78 FR 72899 - Draft Guidance for Industry on Registration for Human Drug Compounding Outsourcing Facilities...

Science.gov (United States)

2013-12-04

... information technology. Under the draft guidance, outsourcing facilities that elect to register should submit... guidance provides information on how an outsourcing facility should submit facility registration...] Draft Guidance for Industry on Registration for Human Drug Compounding Outsourcing Facilities Under...

Sea-ice Thickness and Draft Statistics from Submarine ULS, Moored ULS, and a Coupled Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of estimates of mean values of sea-ice thickness and sea-ice draft in meters computed from three different input data sets: sea ice draft from...

An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios (External Review Draft)

Science.gov (United States)

EPA has released an external review draft entitled, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios(External Review Draft). The public comment period and the external peer-review workshop are separate processes that provide opportunities ...

78 FR 66744 - Draft Guidance for Industry on Pulmonary Tuberculosis: Developing Drugs for Treatment; Availability

Science.gov (United States)

2013-11-06

...] Draft Guidance for Industry on Pulmonary Tuberculosis: Developing Drugs for Treatment; Availability...) is announcing the availability of a draft guidance for industry entitled ``Pulmonary Tuberculosis... of antimycobacterial drugs for the treatment of pulmonary tuberculosis. This guidance applies to the...

100 Area source operable unit focused feasibility study report. Draft A

International Nuclear Information System (INIS)

1994-09-01

In accordance with the Hanford Past-Practice Strategy (HPPS), a focused feasibility study (FFS) is performed for those waste sites which have been identified as candidates for interim remedial measures (IRM) based on information contained in applicable work plans and limited field investigations (LFI). The FFS process for the 100 Area source operable units will be conducted in two stages. This report, hereafter referred to as the Process Document, documents the first stage of the process. In this stage, IRM alternatives are developed and analyzed on the basis of waste site groups associated with the 100 Area source operable units. The second stage, site-specific evaluation of the IRM alternatives presented in this Process Document, is documented in a series of operable unit-specific reports. The objective of the FFS (this Process Document and subsequent operable unit-specific reports) is to provide decision makers with sufficient information to allow appropriate and timely selection of IRM for sites associated with the 100 Area source operable units. Accordingly, the following information is presented: a presentation of remedial action objectives; a description of 100 Area waste site groups and associated group profiles; a description of IRM alternatives; and detailed and comparative analyses of the IRM alternatives

Relationship between concussion history and neurocognitive test performance in National Football League draft picks.

Science.gov (United States)

Solomon, Gary S; Kuhn, Andrew

2014-04-01

There are limited empirical data available regarding the relationship between concussion history and neurocognitive functioning in active National Football League (NFL) players in general and NFL draft picks in particular. Potential NFL draft picks undergo 2 neurocognitive tests at the National Invitational Camp (Scouting Combine) every year: the Wonderlic and, since 2011, the Immediate Post-concussion Assessment and Cognitive Testing (ImPACT). After conclusion of the combine and before the draft, NFL teams invite potential draft picks to their headquarters for individual visits where further assessment may occur. To examine the relationship between concussion history and neurocognitive performance (ImPACT and Wonderlic) in a sample of elite NFL draft picks. Cohort study; Level of evidence, 3. Over 7 years, 226 potential draft picks were invited to visit a specific NFL team's headquarters after the combine. The athletes were divided into 3 groups based on self-reported concussion history: no prior concussions, 1 prior concussion, and 2 or more prior concussions. Neurocognitive measures of interest included Wonderlic scores (provided by the NFL team) and ImPACT composite scores (administered either at the combine or during a visit to the team headquarters). The relationship between concussion history and neurocognitive scores was assessed, as were the relationships among the 2 neurocognitive tests. Concussion history had no relationship to neurocognitive performance on either the Wonderlic or ImPACT. Concussion history did not affect performance on either neurocognitive test, suggesting that for this cohort, a history of concussion may not have adverse effects on neurocognitive functioning as measured by these 2 tests. This study reveals no correlation between concussion history and neurocognitive test scores (ImPACT, Wonderlic) in soon-to-be active NFL athletes.

The Process of Legal Drafting Regulation in the Development of the Nuclear Power Plant in Indonesia

OpenAIRE

Mardha, Amil

2009-01-01

THE PROCESS OF LEGAL DRAFTING REGULATION IN THE DEVELOPMENT OF THE NUCLEAR POWER PLANT IN INDONESIA. In Indonesia, the process of legal drafting to establish the regulation is based on the Act No. 10 Year 2004 on the Establishment of Legislation. The process shall comply with the constitutional and institutional requirements of national political and legal system. In drafting the development of the regulation of nuclear energy, BAPETEN has been involving some other agencies or other related g...

Executive Summary, Hydraulic Fracturing Study - Draft Assessment 2015

Science.gov (United States)

In this Executive Summary of the HF Draft report, EPA highlights the reviews of scientific literature to assess the potential for hydraulic fracturing for oil and gas to change the quality or quantity of drinking water resources.

Preliminary safety analysis methodology for the SMART

Energy Technology Data Exchange (ETDEWEB)

Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-03-01

This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

Illinois Occupational Skill Standards: Mechanical Drafting Cluster.

Science.gov (United States)

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the mechanical drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

Illinois Occupational Skill Standards: Architectural Drafting Cluster.

Science.gov (United States)

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the architectural drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

2004 Power marketing program, draft environmental impact statement

International Nuclear Information System (INIS)

1996-04-01

The Sierra Nevada Region proposes to develop a marketing plan that would be implemented in the year 2005 and to allocate power to eligible entities within its marketing area in northern and central California and Nevada. Four alternatives were analyzed that are structured around the range of operations of the Central Valley Project hydroelectric system, levels of power purchases, and customer group allocations. The manner in which hydropower Generating plants are operated is one of the fundamental differences across the alternatives. Operating the hydrosystem to provide peaking power (the maximize hydropower peaking alternative, which is similar to the no-action alternative), would provide up to 941 MW of additional load-carrying capacity in comparison to baseload operations of the CVP system (the baseload alternative). Although it is not possible to determine where or when any lost capacity would be made up, building replacement capacity in response to the baseload alternative would result in land-use impacts and the use of natural and financial resources. Peaking also results in small but beneficial regional economic effects. Peaking and baseload alternatives result in different hourly air emission patterns. The peaking alternative results in annual reductions in air pollution and wastewater. Impacts within the CVP are limited to regulating reservoirs, which would have reduced pool-level fluctuations under the baseload alternative. Changes in allocations to customer groups result in small regional effects that are dependent on assumptions made about customer access to wholesale energy markets. The renewable resource acquisition alternative assumes that technology improvements allow for competitively melding 250 MW of renewables with Federal hydropower. Environmental impacts of the renewables alternative depend on the presence of biomass in the resource mix. Overall, the 2004 Draft Environmental Impact Statement (2004 EIS) identified no significant impacts

The draft genome sequence and annotation of the desert woodrat Neotoma lepida

Directory of Open Access Journals (Sweden)

Michael Campbell

2016-09-01

Full Text Available We present the de novo draft genome sequence for a vertebrate mammalian herbivore, the desert woodrat (Neotoma lepida. This species is of ecological and evolutionary interest with respect to ingestion, microbial detoxification and hepatic metabolism of toxic plant secondary compounds from the highly toxic creosote bush (Larrea tridentata and the juniper shrub (Juniperus monosperma. The draft genome sequence and annotation have been deposited at GenBank under the accession LZPO01000000.

77 FR 40068 - Draft Guidance for Industry: Recommendations for Donor Questioning, Deferral, Reentry, and...

Science.gov (United States)

2012-07-06

... the draft guidance are not applicable to donors of Source Plasma. DATES: Although you can comment on... electronic or written comments on the draft guidance by September 4, 2012. ADDRESSES: Submit written requests...-800-835-4709 or 301-827-1800. See the SUPPLEMENTARY INFORMATION section for electronic access to the...

77 FR 53908 - Winter Use Plan, Supplemental Draft Environmental Impact Statement, Yellowstone National Park

Science.gov (United States)

2012-09-04

... DEPARTMENT OF THE INTERIOR National Park Service [NPS-IMRO-YELL-11188; 2310-0070-422] Winter Use... comment period on the Draft Supplemental Environmental Impact Statement (Draft SEIS) for a Winter Use Plan... online at http://parkplanning.nps.gov/YELL (click on the link to the 2012 Supplemental Winter Use Plan...

Radioactive Waste Management System: Draft Project Decision Schedule. Revision

International Nuclear Information System (INIS)

1985-07-01

The Nuclear Waste Policy Act (NWPA) of 1982 (Pub. L. 97-425) requires that the Secretary of Energy prepare, in cooperation with affected Federal agencies, a Project Decision Schedule that portrays the optimum way to attain the operation of geologic repositories. The Draft Project Decision Schedule portrays the major milestones of the Radioactive Waste Management System. It also depicts the set of activities for which Federal agencies have responsibility and the deadlines for taking the required action that are associated with the activities. The NWPA also requires that Federal agencies having determined that they: (1) cannot comply with a deadline for taking a required action; or (2) fail to comply with a deadline contained in the Project Decision Schedule; submit a comprehensive report to the Secretary of Energy and Congress to explain their failure or expected failure. The Secretary, in turn, is required to submit to Congress a response to the agency's report. 7 figs., 13 tabs

75 FR 18241 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-04-09

... Guide, DG-8036, ``Personnel Monitoring Device--Direct-Reading Pocket Dosimeters.'' FOR FURTHER.... The draft regulatory guide (DG), entitled, ``Personnel Monitoring Device--Direct-Reading Pocket... this guide included guidance on indirect-reading pocket dosimeters, this guide excludes such dosimeters...

Is Systemic Operation Design Capable of Reducing Significantly Bias in Operational Level Planning Caused by Military Organizational Culture?

Science.gov (United States)

2006-05-25

drape shallow ‘rival’ ideas across them. At best this constitutes a waste of time and at worse a new source of poor judgments. Nor is such...quoted in 1 (UK) Armoured Division Draft Future Divisional Headquarters Structure Review ref G3/3800 dated 19 Jul 05. APPENDIX II – Structuring...and divisional level (HQ 1 UK Armoured Division) through to the operational and strategic interface (Project ROBERTS 2).64 Functions in a Deployed

76 FR 28789 - Draft Alert Entitled “Preventing Occupational Respiratory Disease From Dampness in Office...

Science.gov (United States)

2011-05-18

... NIOSH-238] Draft Alert Entitled ``Preventing Occupational Respiratory Disease From Dampness in Office... Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control and Prevention (CDC), announces the availability of a draft Alert entitled ``Preventing Occupational Respiratory Disease from...

78 FR 37795 - Draft NOAA Procedures for Government to Government Consultation With Federally Recognized Indian...

Science.gov (United States)

2013-06-24

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XC726 Draft NOAA... Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice; request for comments. SUMMARY: NOAA announces the availability of and request for comments on the Draft NOAA Procedures for Government...

76 FR 75551 - Draft Guidance for Industry on Regulatory Classification of Pharmaceutical Co-Crystals; Availability

Science.gov (United States)

2011-12-02

... of Pharmaceutical Co-Crystals.'' This draft guidance provides applicants of new drug applications (NDAs) and abbreviated new drug applications (ANDAs) with the Center for Drug Evaluation and Research's (CDER's) current thinking on the appropriate classification of co-crystal solid-state forms. This draft...

77 FR 48995 - Draft National Toxicology Program (NTP) Monograph on Developmental Effects and Pregnancy Outcomes...

Science.gov (United States)

2012-08-15

... Program (NTP) Monograph on Developmental Effects and Pregnancy Outcomes Associated With Cancer... the panel completes its peer review of the draft monograph. Topic: Peer review of the draft NTP Monograph on Developmental Effects and Pregnancy Outcomes Associated with Cancer Chemotherapy Use during...

33 CFR 150.20 - How many copies of the operations manual must be given to the Coast Guard?

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How many copies of the operations manual must be given to the Coast Guard? 150.20 Section 150.20 Navigation and Navigable Waters COAST... § 150.20 How many copies of the operations manual must be given to the Coast Guard? The draft operations...

A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

Science.gov (United States)

Franken, Ken; And Others

A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

75 FR 62893 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-10-13

... the ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov... NUCLEAR REGULATORY COMMISSION [NRC-2010-0321] Draft Regulatory Guide: Issuance, Availability... Guide, DG-1196, ``Qualification for Cement Grouting for Prestressing Tendons in Containment Structures...

Energy market review releases draft report

International Nuclear Information System (INIS)

Anon

2002-01-01

The Energy Market Review Releases draft report has made recommendations consistent with the Australian Gas Association (AGA)'s submissions in a number of areas. In particular, it has endorsed: 1. the need for an independent review of the gas access regime, to address the deficiencies with current access regulation identified by the Productivity Commission's Review of the National Access Regime; 2. the need for greater upstream gas market competition; 3. the principle that significant regulatory decisions should be subject to clear merits and judicial review; and 4. the need to avoid restrictions on retail energy prices. The report also endorses the need for a 'technology neutral' approach to greenhouse emissions abatement policy. It states that 'many of the current measures employed to reduce greenhouse gas emissions are poorly targeted', and that they 'target technologies or fuel types rather than greenhouse gas abatement.' Additionally, it explicitly recognises the key conclusions of the AGA's recently-released Research Paper, Reducing Greenhouse Emissions from Water Heating: Natural Gas as a Cost-effective Option. The draft report recommends the development of an economy-wide emissions trading system, to achieve a more cost-effective approach to greenhouse abatement

CENELEC Project Report Smart House Roadmap (draft)

NARCIS (Netherlands)

Hartog, F.T.H. den; Suters, T.; Parsons, J.; Faller, J.

2010-01-01

This CENELEC project report has been drafted by a project team and steering group of representatives of interested parties and is to be endorsed on 2010-11-23. Neither the national members of CENELEC nor the CEN-CENELEC Management Centre can be held accountable for the technical content of this

Reflections of the Capitalization on Operational Leasing in Transport Subsector Companie's Structure Indicators Listed on Bovespa

Directory of Open Access Journals (Sweden)

Vinícius Gomes Martins

2013-12-01

Full Text Available Leasing is an alternative to financing the acquisition of assets for entities, and it has like modalities the operating procedures and financial leasing. This type of operation has caused several theoretical obstacles, among them the issue of off-balance sheet transactions. To reduce these accounting inconsistencies, the IASB and FASB have been working together to standardize the subject, this result was the publication of Exposure Draft 2010/09 (ED, which promises significant changes in the treatment of such transactions. Given this, this study aimed to analyze the impacts of the proposed changes contained in the ED, as the capitalization of operating leases, in the structure indicators at transportation subsector companies listed on the Bovespa. For this, we used the simulation methodology of the proposals in ED, confirming previous research. After the simulation accomplished, we proceeded with the Student's t test for paired samples, in order to check if the expected changes may cause significant differences in the indicators tested. The evidence points in the year of 2011, an amount of $ 3.8 billion, related to operating leases, not moved by the balance sheet (off-balance sheet of their respective companies. It was also observed that, on average, sample firms have operating leases to pay equivalent to 18.46% equity and 16.14% of debt. Finally, by simulating the proposals in the ED, it was found that the indicators of debt, equity and immobilization of the detention of non-current resources show significant variation from the statistical point of view, due to the capitalization of operating lease balances.

Adopted Methodology for Cool-Down of SST-1 Superconducting Magnet System: Operational Experience with the Helium Refrigerator

Science.gov (United States)

Sahu, A. K.; Sarkar, B.; Panchal, P.; Tank, J.; Bhattacharya, R.; Panchal, R.; Tanna, V. L.; Patel, R.; Shukla, P.; Patel, J. C.; Singh, M.; Sonara, D.; Sharma, R.; Duggar, R.; Saxena, Y. C.

2008-03-01

The 1.3 kW at 4.5 K helium refrigerator / liquefier (HRL) was commissioned during the year 2003. The HRL was operated with its different modes as per the functional requirements of the experiments. The superconducting magnets system (SCMS) of SST-1 was successfully cooled down to 4.5 K. The actual loads were different from the originally predicted boundary conditions and an adjustment in the thermodynamic balance of the refrigerator was necessary. This led to enhanced capacity, which was achieved without any additional hardware. The required control system for the HRL was tuned to achieve the stable thermodynamic balance, while keeping the turbines' operating parameters at optimized conditions. An extra mass flow rate requirement was met by exploiting the margin available with the compressor station. The methodology adopted to modify the capacity of the HRL, the safety precautions and experience of SCMS cool down to 4.5 K, are discussed.

75 FR 58444 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-09-24

... ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc... NUCLEAR REGULATORY COMMISSION [NRC-2010-0305] Draft Regulatory Guide: Issuance, Availability... Guide, DG-1244, ``Availability of Electric Power Sources.'' FOR FURTHER INFORMATION CONTACT: Satish...

78 FR 13069 - Draft Guidance for Industry: Recommendations for Screening, Testing, and, Management of Blood...

Science.gov (United States)

2013-02-26

... components, including Source Plasma. The guidance announced in this notice replaces the draft guidance... before it begins work on the final version of the guidance, submit either electronic or written comments... the SUPPLEMENTARY INFORMATION section for electronic access to the draft guidance document. Submit...

77 FR 42758 - Notice of Availability of the Prehistoric Trackways National Monument Draft Resource Management...

Science.gov (United States)

2012-07-20

... Environmental Impact Statement, New Mexico AGENCY: Bureau of Land Management, Interior. ACTION: Notice of availability. SUMMARY: In accordance with the National Environmental Policy Act of 1969, as amended, and the... prepared a Draft Resource Management Plan (RMP) and Draft Environmental Impact Statement (EIS) for the...

26 CFR 1.1231-2 - Livestock held for draft, breeding, dairy, or sporting purposes.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Livestock held for draft, breeding, dairy, or... Losses § 1.1231-2 Livestock held for draft, breeding, dairy, or sporting purposes. (a)(1) In the case of cattle, horses, or other livestock acquired by the taxpayer after December 31, 1969, section 1231 applies...

Draft genomes and reference transcriptomes extend the coding potential of the fish pathogen Piscirickettsia salmonis

Directory of Open Access Journals (Sweden)

Angela D. Millar

2018-05-01

Full Text Available Background: Draft and complete genome sequences from bacteria are key tools to understand genetic determinants involved in pathogenesis in several disease models. Piscirickettsia salmonis is a Gram-negative bacterium responsible for the Salmon Rickettsial Syndrome (SRS, a bacterial disease that threatens the sustainability of the Chilean salmon industry. In previous reports, complete and draft genome sequences have been generated and annotated. However, the lack of transcriptome data underestimates the genetic potential, does not provide information about transcriptional units and contributes to disseminate annotation errors. Results: Here we present the draft genome and transcriptome sequences of four P. salmonis strains. We have identified the transcriptional architecture of previously characterized virulence factors and trait-specific genes associated to cation uptake, metal efflux, antibiotic resistance, secretion systems and other virulence factors. Conclusions: This data has provided a refined genome annotation and also new insights on the transcriptional structures and coding potential of this fish pathogen.How to cite: Millar AD, Tapia P, Gomez FA, et al. Draft genomes and reference transcriptomes extend the coding potential of the fish pathogen Piscirickettsia salmonis. Electron J Biotechnol 2018;33. https://doi.org/10.1016/j.ejbt.2018.04.002. Keywords: Bacterial genomes, Coding potential, Comparative analysis, Draft genome, Piscirickettsia salmonis, Reference transcriptome, Refined annotation, Salmon Rickettsial Syndrome, Salmonids

Safe operation of critical assemblies and research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-09-15

Some countries have accumulated considerable experience in the operation of these reactors and have in the process developed safe practices. On the other hand, other countries which have recently acquired, or will soon acquire, such reactors do not have sufficient background of experience with them to have developed full knowledge regarding their safe operation. In this situation, the International Atomic Energy Agency has considered that it would be useful to make available to all its Member States a set of recommendations on the safe operation of these reactors, based on the accumulated experience and best practices. The Director General accordingly nominated a Pane Ion Safe Operation of Critical Assemblies and Research Reactors to assist the Agency's Secretariat in drafting such recommendations

SEISMIC DESIGN REQUIREMENTS SELECTION METHODOLOGY FOR THE SLUDGE TREATMENT and M-91 SOLID WASTE PROCESSING FACILITIES PROJECTS

International Nuclear Information System (INIS)

RYAN GW

2008-01-01

In complying with direction from the U.S. Department of Energy (DOE), Richland Operations Office (RL) (07-KBC-0055, 'Direction Associated with Implementation of DOE-STD-1189 for the Sludge Treatment Project,' and 08-SED-0063, 'RL Action on the Safety Design Strategy (SDS) for Obtaining Additional Solid Waste Processing Capabilities (M-91 Project) and Use of Draft DOE-STD-I 189-YR'), it has been determined that the seismic design requirements currently in the Project Hanford Management Contract (PHMC) will be modified by DOE-STD-1189, Integration of Safety into the Design Process (March 2007 draft), for these two key PHMC projects. Seismic design requirements for other PHMC facilities and projects will remain unchanged. Considering the current early Critical Decision (CD) phases of both the Sludge Treatment Project (STP) and the Solid Waste Processing Facilities (M-91) Project and a strong intent to avoid potentially costly re-work of both engineering and nuclear safety analyses, this document describes how Fluor Hanford, Inc. (FH) will maintain compliance with the PHMC by considering both the current seismic standards referenced by DOE 0 420.1 B, Facility Safety, and draft DOE-STD-1189 (i.e., ASCE/SEI 43-05, Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities, and ANSI ANS 2.26-2004, Categorization of Nuclear Facility Structures, Systems and Components for Seismic Design, as modified by draft DOE-STD-1189) to choose the criteria that will result in the most conservative seismic design categorization and engineering design. Following the process described in this document will result in a conservative seismic design categorization and design products. This approach is expected to resolve discrepancies between the existing and new requirements and reduce the risk that project designs and analyses will require revision when the draft DOE-STD-1189 is finalized

Methodology for Evaluating Safety System Operability using Virtual Parameter Network