Methodology applied to develop the DHIE: applied methodology

CSIR Research Space (South Africa)

Herselman, Marlien

2016-12-01

Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

Tolerance limits and methodologies for IMRT measurement-based verification QA: Recommendations of AAPM Task Group No. 218.

Science.gov (United States)

Miften, Moyed; Olch, Arthur; Mihailidis, Dimitris; Moran, Jean; Pawlicki, Todd; Molineu, Andrea; Li, Harold; Wijesooriya, Krishni; Shi, Jie; Xia, Ping; Papanikolaou, Nikos; Low, Daniel A

2018-04-01

Patient-specific IMRT QA measurements are important components of processes designed to identify discrepancies between calculated and delivered radiation doses. Discrepancy tolerance limits are neither well defined nor consistently applied across centers. The AAPM TG-218 report provides a comprehensive review aimed at improving the understanding and consistency of these processes as well as recommendations for methodologies and tolerance limits in patient-specific IMRT QA. The performance of the dose difference/distance-to-agreement (DTA) and γ dose distribution comparison metrics are investigated. Measurement methods are reviewed and followed by a discussion of the pros and cons of each. Methodologies for absolute dose verification are discussed and new IMRT QA verification tools are presented. Literature on the expected or achievable agreement between measurements and calculations for different types of planning and delivery systems are reviewed and analyzed. Tests of vendor implementations of the γ verification algorithm employing benchmark cases are presented. Operational shortcomings that can reduce the γ tool accuracy and subsequent effectiveness for IMRT QA are described. Practical considerations including spatial resolution, normalization, dose threshold, and data interpretation are discussed. Published data on IMRT QA and the clinical experience of the group members are used to develop guidelines and recommendations on tolerance and action limits for IMRT QA. Steps to check failed IMRT QA plans are outlined. Recommendations on delivery methods, data interpretation, dose normalization, the use of γ analysis routines and choice of tolerance limits for IMRT QA are made with focus on detecting differences between calculated and measured doses via the use of robust analysis methods and an in-depth understanding of IMRT verification metrics. The recommendations are intended to improve the IMRT QA process and establish consistent, and comparable IMRT QA

Review of effectiveness-evaluation methodologies for safeguards and security systems

International Nuclear Information System (INIS)

Dowdy, E.J.; Mangan, D.L.

1982-06-01

We discuss the factors that influence the effectiveness of safeguards and security measures and the characteristics required of effectiveness evaluation methodologies. Within this context and from a utility standpoint, we review those effectiveness evaluation methodologies that have been developed. Our principal recommendation concerns the application and concomitant validation of existing methodologies. This recommendation derives from our conclusion that there has been a gross imbalance between the effort spent on methodology development and the application of those methodologies. Only for those safeguards measures that do not seem to be covered by existing methodologies or that seem to be inadequately covered do we suggest development. 44 references

A development methodology for scientific software

International Nuclear Information System (INIS)

Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

1985-01-01

We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

Formalizing the ISDF Software Development Methodology

OpenAIRE

Mihai Liviu DESPA

2015-01-01

The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

Recommended system of application and development

Science.gov (United States)

Wang, Wei

2018-04-01

A recommender system is a project that helps users identify their wishes and needs. The recommender system has been successfully applied to many e-commerce environments, such as news, film, music, books and other areas of recommendation. This paper mainly discusses the application of recommendation technology in software engineering, data and knowledge engineering, configurable projects and persuasion technology, and summarizes the development trend of recommendation technology in the future.

Transparent Guideline Methodology Needed

DEFF Research Database (Denmark)

Lidal, Ingeborg; Norén, Camilla; Mäkelä, Marjukka

2013-01-01

As part of learning at the Nordic Workshop of Evidence-based Medicine, we have read with interest the practice guidelines for central venous access, published in your Journal in 2012.1 We appraised the quality of this guideline using the checklist developed by The Evidence-Based Medicine Working ...... are based on best currently available evidence. Our concerns are in two main categories: the rigor of development, including methodology of searching, evaluating, and combining the evidence; and editorial independence, including funding and possible conflicts of interest....... Group.2 Similar criteria for guideline quality have been suggested elsewhere.3 Our conclusion was that this much needed guideline is currently unclear about several aspects of the methodology used in developing the recommendations. This means potential users cannot be certain that the recommendations...

A comparison of results of empirical studies of supplementary search techniques and recommendations in review methodology handbooks: a methodological review.

Science.gov (United States)

Cooper, Chris; Booth, Andrew; Britten, Nicky; Garside, Ruth

2017-11-28

The purpose and contribution of supplementary search methods in systematic reviews is increasingly acknowledged. Numerous studies have demonstrated their potential in identifying studies or study data that would have been missed by bibliographic database searching alone. What is less certain is how supplementary search methods actually work, how they are applied, and the consequent advantages, disadvantages and resource implications of each search method. The aim of this study is to compare current practice in using supplementary search methods with methodological guidance. Four methodological handbooks in informing systematic review practice in the UK were read and audited to establish current methodological guidance. Studies evaluating the use of supplementary search methods were identified by searching five bibliographic databases. Studies were included if they (1) reported practical application of a supplementary search method (descriptive) or (2) examined the utility of a supplementary search method (analytical) or (3) identified/explored factors that impact on the utility of a supplementary method, when applied in practice. Thirty-five studies were included in this review in addition to the four methodological handbooks. Studies were published between 1989 and 2016, and dates of publication of the handbooks ranged from 1994 to 2014. Five supplementary search methods were reviewed: contacting study authors, citation chasing, handsearching, searching trial registers and web searching. There is reasonable consistency between recommended best practice (handbooks) and current practice (methodological studies) as it relates to the application of supplementary search methods. The methodological studies provide useful information on the effectiveness of the supplementary search methods, often seeking to evaluate aspects of the method to improve effectiveness or efficiency. In this way, the studies advance the understanding of the supplementary search methods. Further

Developing the P2/6 methodology [to assess the security capability of modern distributed generation

Energy Technology Data Exchange (ETDEWEB)

Allan, Ron; Strbac, Goran; Djapic, Predrag; Jarrett, Keith [Manchester Univ. Inst. of Science and Technology, Manchester (United Kingdom)

2004-04-29

The main objective of the project was to use the methodology developed in the previous Methodology project (ETSU/FES Project K/EL/00287) to assess the security capability of modern distributed generation in order to review Table 2 and related text of Engineering Recommendation P2/5, and to propose information and results that could be used to create a new P2/6 that takes into account modern types of generating units; unit numbers; unit availabilities; and capacities. Technical issues raised in the previous study but held over until this project include: Treatment of single unit generation systems; Effect of shape of load duration curves; Persistence of intermittent generation, T{sub m}; Time resolution of intermittent generation output profiles; Ride-through capability; Risk to loss of supply. Three main ways of implementing the methodology were recommended: Look-up table(s), Graphical, and Computer program. The specification for the computer program was to produce a simple spreadsheet application package that an engineer with a reasonably knowledge of the approach could use. This prototype package has been developed in conjunction with Workstream 3. Its objective is to calculate the capability contribution to security of supply from distributed generation connected to a particular demand group. The application has been developed using Microsoft Excel and Visual Basic for Applications. New Tables for inclusion in P2/6 are included. (UK)

Development of a reference biospheres methodology for radioactive waste disposal. Final report

International Nuclear Information System (INIS)

Dorp, F. van

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways (a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in detail by

Review and evaluation of the methodological quality of the existing guidelines and recommendations for inherited neurometabolic disorders

DEFF Research Database (Denmark)

Cassis, Linda; Cortès-Saladelafont, Elisenda; Molero-Luis, Marta

2015-01-01

and timely treatments are often pivotal for the favorable course of the disease. Thus, the elaboration of new evidence-based recommendations for iNMD diagnosis and management is increasingly requested by health care professionals and patients, even though the methodological quality of existing guidelines...

SPRINT RA 230: Methodology for knowledge based developments

International Nuclear Information System (INIS)

Wallsgrove, R.; Munro, F.

1991-01-01

SPRINT RA 230: A Methodology for Knowledge Based Developments, funded by the European Commission, was set up to investigate the use of KBS in the engineering industry. Its aim was to find out low KBS were currently used and what people's conceptions of them was, to disseminate current knowledge and to recommend further research into this area. A survey (by post and face to face interviews) was carried out under SPRINT RA 230 to investigate requirements for more intelligent software. In the survey we looked both at how people think about Knowledge Based Systems (KBS), what they find useful and what is not useful, and what current expertise problems or limitations of conventional software might suggest KBS solutions. (orig./DG)

Application of agile methodologies in software development

Directory of Open Access Journals (Sweden)

Jovanović Aca D.

2016-01-01

Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

Strong Public Health Recommendations from Weak Evidence? Lessons Learned in Developing Guidance on the Public Health Management of Meningococcal Disease

Directory of Open Access Journals (Sweden)

Germaine Hanquet

2015-01-01

Full Text Available The evidence underpinning public health policy is often of low quality, leading to inconsistencies in recommended interventions. One example is the divergence in national policies across Europe for managing contacts of invasive meningococcal disease. Aiming to develop consistent guidance at the European level, a group of experts reviewed the literature and formulated recommendations. The group defined eight priority research questions, searched the literature, and formulated recommendations using GRADE methodology. Five of the research questions are discussed in this paper. After taking into account quality of evidence, benefit, harm, value, preference, burden on patient of the intervention, and resource implications, we made four strong recommendations and five weak recommendations for intervention. Strong recommendations related not only to one question with very low quality of evidence as well as to two questions with moderate to high quality of evidence. The weak recommendations related to two questions with low and very low quality of evidence but also to one question with moderate quality of evidence. GRADE methodology ensures a transparent process and explicit recognition of additional factors that should be considered when making recommendations for policy. This approach can be usefully applied to many areas of public health policy where evidence quality is often low.

Comparative study on software development methodologies

OpenAIRE

Mihai Liviu DESPA

2014-01-01

This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

EURRECA—Evidence-Based Methodology for Deriving Micronutrient Recommendations

NARCIS (Netherlands)

Dhonukshe-Rutten, R.A.M.; Bouwman, J.; Brown, K.A.; Cavelaars, A.E.J.M.; Collings, R.; Grammatikaki, E.; Groot, L.C.P.G.M. de; Gurinovic, M.; Harvey, L.J.; Hermoso, M.; Hurst, R.; Kremer, S.H.A.; Ngo, J.; Novakovic, R.; Raats, M.M.; Rollin, F.; Serra-Majem, L.; Souverein, O.W.; Timotijevic, L.; Veer, P. van 't

2013-01-01

The EURopean micronutrient RECommendations Aligned (EURRECA) Network of Excellence explored the process of setting micronutrient recommendations to address the variance in recommendations across Europe. Work centered upon the transparent assessment of nutritional requirements via a series of

Methodology for developing new test methods

Directory of Open Access Journals (Sweden)

A. I. Korobko

2017-06-01

Full Text Available The paper describes the methodology for developing new test methods and forming solutions for the development of new test methods. The basis of the methodology for developing new test methods is the individual elements of the system and process approaches. They contribute to the development of an effective research strategy for the object, the study of interrelations, the synthesis of an adequate model of the test method. The effectiveness of the developed test method is determined by the correct choice of the set of concepts, their interrelations and mutual influence. This allows you to solve the tasks assigned to achieve the goal. The methodology is based on the use of fuzzy cognitive maps. The question of the choice of the method on the basis of which the model for the formation of solutions is based is considered. The methodology provides for recording a model for a new test method in the form of a finite set of objects. These objects are significant for the test method characteristics. Then a causal relationship is established between the objects. Further, the values of fitness indicators and the observability of the method and metrological tolerance for the indicator are established. The work is aimed at the overall goal of ensuring the quality of tests by improving the methodology for developing the test method.

Development of a methodology for radionuclide impurity analysis in radiopharmaceuticals using gamma spectrometry

International Nuclear Information System (INIS)

Paula, Eduardo Bonfim de; Araujo, Miriam Taina Ferreira de; Delgado, Jose Ubiratan; Poledna, Roberto; Lins, Ronaldo; Leiras, Anderson; Silva, Carlos Jose da; Oliveira, Antonio Eduardo de

2016-01-01

The LNMRI has sought to develop a methodology for the identification and accurate detection of gamma radiation impurities stations in metrological level, aiming to meet the recommendations not only of international pharmacopoeia, as well as the CNEN and ANVISA regarding the quality control can ensure patients the doses received by the practices are as low as feasible. As an initial target, it was possible to obtain an efficiency curve with uncertainty around 1% necessary to initiate future measurements of interest applied to nuclear medicine and to start the development of impurities analysis technique. (author)

Development in methodologies for modelling of human and ecotoxic impacts in LCA

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Huijbregts, Mark; Jolliet, Olivier

2009-01-01

Under the UNEP-SETAC Life Cycle Initiative there is an aim to develop an internationally backed recommended practice of life cycle impact assessment addressing methodological issues like choice of characterization model and characterization factors. In this context, an international comparison...... was performed of characterization models for toxic impacts from chemicals in life cycle assessment. Six commonly used characterization models were compared and in a sequence of workshops. Crucial fate, exposure and effect aspects were identified for which the models differed in their treatment. The models were....... The USEtox™ model has been used to calculate characterization factors for several thousand substances and is currently under review with the intention that it shall form the basis of the recommendations from the UNEP-SETAC Life Cycle Initiative regarding characterization of toxic impacts in Life Cycle...

What the Current System Development Trends tell us about Systems Development Methodologies: Toward explaining SSDAM, Agile and IDEF0 Methodologies

Directory of Open Access Journals (Sweden)

Abdulla F. Ally

2015-03-01

Full Text Available Systems integration, customization and component based development approach are of increasing attention. This trend facilitates the research attention to also focus on systems development methodologies. The availability of systems development tools, rapid change in technologies, evolution of mobile computing and the growth of cloud computing have necessitated a move toward systems integration and customization rather than developing systems from scratch. This tendency encourages component based development and discourages traditional systems development approach. The paper presents and evaluates SSADM, IDEF0 and Agile systems development methodologies. More specifically, it examines how they fit or not fit into the current competitive market of systems development. In the view of this perspective, it is anticipated that despite of its popularity, SSADM methodology is becoming obsolete while Agile and IDEF0 methodologies are still gaining acceptance in the current competitive market of systems development. The present study more likely enrich our understanding of the systems development methodologies concepts and draw attention regarding where the current trends in system development are heading.

Photovoltaic module energy rating methodology development

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

1996-05-01

A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

Methodology for developing evidence-based clinical imaging guidelines: Joint recommendations by Korea society of radiology and national evidence-based healthcare collaborating agency

Energy Technology Data Exchange (ETDEWEB)

Choi, Sol Ji; Jo, Ae Jeong; Choi, Jin A [Div. for Healthcare Technology Assessment Research, National Evidence-Based Healthcare Collaborating Agency, Seoul (Korea, Republic of); and others

2017-01-15

This paper is a summary of the methodology including protocol used to develop evidence-based clinical imaging guidelines (CIGs) in Korea, led by the Korean Society of Radiology and the National Evidence-based Healthcare Collaborating Agency. This is the first protocol to reflect the process of developing diagnostic guidelines in Korea. The development protocol is largely divided into the following sections: set-up, process of adaptation, and finalization. The working group is composed of clinical imaging experts, and the developmental committee is composed of multidisciplinary experts to validate the methodology. The Korean CIGs will continue to develop based on this protocol, and these guidelines will act for decision supporting tools for clinicians as well as reduce medical radiation exposure.

Methodology for developing evidence-based clinical imaging guidelines: Joint recommendations by Korea society of radiology and national evidence-based healthcare collaborating agency

International Nuclear Information System (INIS)

Choi, Sol Ji; Jo, Ae Jeong; Choi, Jin A

2017-01-01

This paper is a summary of the methodology including protocol used to develop evidence-based clinical imaging guidelines (CIGs) in Korea, led by the Korean Society of Radiology and the National Evidence-based Healthcare Collaborating Agency. This is the first protocol to reflect the process of developing diagnostic guidelines in Korea. The development protocol is largely divided into the following sections: set-up, process of adaptation, and finalization. The working group is composed of clinical imaging experts, and the developmental committee is composed of multidisciplinary experts to validate the methodology. The Korean CIGs will continue to develop based on this protocol, and these guidelines will act for decision supporting tools for clinicians as well as reduce medical radiation exposure

The methodology of population surveys of headache prevalence, burden and cost: Principles and recommendations from the Global Campaign against Headache

Science.gov (United States)

2014-01-01

The global burden of headache is very large, but knowledge of it is far from complete and needs still to be gathered. Published population-based studies have used variable methodology, which has influenced findings and made comparisons difficult. Among the initiatives of the Global Campaign against Headache to improve and standardize methods in use for cross-sectional studies, the most important is the production of consensus-based methodological guidelines. This report describes the development of detailed principles and recommendations. For this purpose we brought together an expert consensus group to include experience and competence in headache epidemiology and/or epidemiology in general and drawn from all six WHO world regions. The recommendations presented are for anyone, of whatever background, with interests in designing, performing, understanding or assessing studies that measure or describe the burden of headache in populations. While aimed principally at researchers whose main interests are in the field of headache, they should also be useful, at least in parts, to those who are expert in public health or epidemiology and wish to extend their interest into the field of headache disorders. Most of all, these recommendations seek to encourage collaborations between specialists in headache disorders and epidemiologists. The focus is on migraine, tension-type headache and medication-overuse headache, but they are not intended to be exclusive to these. The burdens arising from secondary headaches are, in the majority of cases, more correctly attributed to the underlying disorders. Nevertheless, the principles outlined here are relevant for epidemiological studies on secondary headaches, provided that adequate definitions can be not only given but also applied in questionnaires or other survey instruments. PMID:24467862

Breastfeeding and Postpartum Depression: An Overview and Methodological Recommendations for Future Research

Science.gov (United States)

Pope, Carley J.; Mazmanian, Dwight

2016-01-01

Emerging research suggests that a relationship exists between breastfeeding and postpartum depression; however, the direction and precise nature of this relationship are not yet clear. The purpose of this paper is to provide an overview of the relationship between breastfeeding and postpartum depression as it has been examined in the empirical literature. Also, the potential mechanisms of action that have been implicated in this relationship are also explored. PubMed and PsycINFO were searched using the keywords: breastfeeding with postpartum depression, perinatal depression, postnatal depression. Results of this search showed that researchers have examined this relationship in diverse ways using diverse methodology. In particular, researchers have examined the relationships between postpartum depression and breastfeeding intention, initiation, duration, and dose. Due to a number of methodological differences among past studies we make some recommendations for future research that will better facilitate an integration of findings. Future research should (1) use standardized assessment protocols; (2) confirm diagnosis through established clinical interview when possible; (3) provide a clear operationalized definition for breastfeeding variables; (4) clearly define the postpartum period interval assessed and time frame for onset of symptoms; (5) be prospective or longitudinal in nature; and (6) take into consideration other potential risk factors identified in the empirical literature. PMID:27148457

Breastfeeding and Postpartum Depression: An Overview and Methodological Recommendations for Future Research

Directory of Open Access Journals (Sweden)

Carley J. Pope

2016-01-01

Full Text Available Emerging research suggests that a relationship exists between breastfeeding and postpartum depression; however, the direction and precise nature of this relationship are not yet clear. The purpose of this paper is to provide an overview of the relationship between breastfeeding and postpartum depression as it has been examined in the empirical literature. Also, the potential mechanisms of action that have been implicated in this relationship are also explored. PubMed and PsycINFO were searched using the keywords: breastfeeding with postpartum depression, perinatal depression, postnatal depression. Results of this search showed that researchers have examined this relationship in diverse ways using diverse methodology. In particular, researchers have examined the relationships between postpartum depression and breastfeeding intention, initiation, duration, and dose. Due to a number of methodological differences among past studies we make some recommendations for future research that will better facilitate an integration of findings. Future research should (1 use standardized assessment protocols; (2 confirm diagnosis through established clinical interview when possible; (3 provide a clear operationalized definition for breastfeeding variables; (4 clearly define the postpartum period interval assessed and time frame for onset of symptoms; (5 be prospective or longitudinal in nature; and (6 take into consideration other potential risk factors identified in the empirical literature.

Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

International Nuclear Information System (INIS)

Ritzman, R.L.; Husseiny, A.A.

1980-08-01

The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Chung, Chang Hyun; You, Young Woo; Kim, Yoon Ik; Yang, Hui Chang; Huh, Byeong Gill; Lee, Dong Won; Ahn, Gwan Won [Seoul National Univ., Seoul (Korea, Republic of)

2001-03-15

The purpose of this study IS the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of nuclear power plants. In this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested. Configuration control assessment methodology suggested in this study for the purpose of the development of configuration control methodology reflecting the characteristics of Korean NPPs, can be utilized as the supplement of current PSA methodologies.

A recommended program of tritium monitoring research and development

International Nuclear Information System (INIS)

Nickerson, S.B.; Gerdingh, R.F.; Penfold, K.

1982-10-01

This report presents recommendations for programs of research and development in tritium monitoring instrumentation. These recommendations, if implemented, will offer Canadian industry the opportunity to develop marketable instruments. The major recommendations are to assist in the development and promotion of two Chalk River Nuclear Laboratories' monitors and an Ontario Hydro monitor, and to support research and development of a surface monitor

What the recommended practice for setpoint determination methodologies does or does not do. Part 2

International Nuclear Information System (INIS)

Beuchel, B.E.; Annon, M.C.

1991-01-01

The long-awaited Recommended Practice (RP) to complement ISA S67.04-1987 Setpoints for Nuclear Safety-Related Instrumentation is very close to publication. The RP, entitled Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation, has been prepared through the efforts of over 50 persons representing over 20 utilities, all four LWR NSSS vendors, three instrument manufacturers, several architectural engineering firms, numerous consulting firms and other individuals. Throughout the period during which the RP was being prepared, it became apparent to the RP Committee members that the scope and approaches outlined in the RP were not fully understood by the general nuclear community. Therefore, the goals of this paper are to enhance the understanding of the RP and facilitate the utilization of the RP by potential users. The primary objective of the paper is to provide a broad overview of the purpose and scope of the RP. This will be achieved by describing the general organization of the RP as well as a brief explanation of the contents of each section. The paper will also discuss the role of the RP in the development of actual setpoint calculations, i.e., and explanation of the need for a user's specific methodology document to customize the RP for a specific user. In addition, the paper identifies, and attempts to clarify, several potential misconceptions by users, as to what the RP does not do

A methodology for developing distributed programs

NARCIS (Netherlands)

Ramesh, S.; Mehndiratta, S.L.

1987-01-01

A methodology, different from the existing ones, for constructing distributed programs is presented. It is based on the well-known idea of developing distributed programs via synchronous and centralized programs. The distinguishing features of the methodology are: 1) specification include process

Guidance on Conducting and REporting DElphi Studies (CREDES) in palliative care: Recommendations based on a methodological systematic review.

Science.gov (United States)

Jünger, Saskia; Payne, Sheila A; Brine, Jenny; Radbruch, Lukas; Brearley, Sarah G

2017-09-01

The Delphi technique is widely used for the development of guidance in palliative care, having impact on decisions with relevance for patient care. To systematically examine the application of the Delphi technique for the development of best practice guidelines in palliative care. A methodological systematic review was undertaken using the databases PubMed, CINAHL, Web of Science, Academic Search Complete and EMBASE. Original articles (English language) were included when reporting on empirical studies that had used the Delphi technique to develop guidance for good clinical practice in palliative care. Data extraction included a quality appraisal on the rigour in conduct of the studies and the quality of reporting. A total of 30 empirical studies (1997-2015) were considered for full-text analysis. Considerable differences were identified regarding the rigour of the design and the reporting of essential process and outcome parameters. Furthermore, discrepancies regarding the use of terms for describing the method were observed, for example, concerning the understanding of a 'round' or a 'modified Delphi study'. Substantial variation was found concerning the quality of the study conduct and the transparency of reporting of Delphi studies used for the development of best practice guidance in palliative care. Since credibility of the resulting recommendations depends on the rigorous use of the Delphi technique, there is a need for consistency and quality both in the conduct and reporting of studies. To allow a critical appraisal of the methodology and the resulting guidance, a reporting standard for Conducting and REporting of DElphi Studies (CREDES) is proposed.

The prosa methodology for scenario development

International Nuclear Information System (INIS)

Grupa, J.B.

2001-01-01

In this paper a methodology for scenario development is proposed. The method is developed in an effort to convince ourselves (and others) that all conceivable future developments of a waste repository have been covered. To be able to assess all conceivable future developments, the method needs to be comprehensive. To convince us and others the method should be structured in such a way that the treatment of each conceivable future development is traceable. The methodology is currently being applied to two Dutch disposal designs. Preliminary results show that the elaborated method functions better than the original method. However, some elements in the method will need further refinement. (author)

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chang Hyeon; Yu, Yeong Woo; Cho, Jae Seon; Kim, Ju Yeol; Kim, Yun Ik; Yang, Hui Chang; Park, Gang Min; Hur, Byeong Gil [Seoul National Univ., Seoul (Korea, Republic of)

1999-03-15

The purpose of this study is the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of Nuclear Power Plant. The development of this methodology can contribute to enhance safety. In the first year of this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested.

GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Z.N. Varlamova

2007-06-01

Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

Development of a reference biospheres methodology for radioactive waste disposal. Final report

Energy Technology Data Exchange (ETDEWEB)

Dorp, F van [NAGRA (Switzerland); and others

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways(a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in detail by

Development of a reference biospheres methodology for radioactive waste disposal. Final report

Energy Technology Data Exchange (ETDEWEB)

Dorp, F. van [NAGRA (Switzerland)] [and others

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways(a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in

Multimodal hybrid reasoning methodology for personalized wellbeing services.

Science.gov (United States)

Ali, Rahman; Afzal, Muhammad; Hussain, Maqbool; Ali, Maqbool; Siddiqi, Muhammad Hameed; Lee, Sungyoung; Ho Kang, Byeong

2016-02-01

A wellness system provides wellbeing recommendations to support experts in promoting a healthier lifestyle and inducing individuals to adopt healthy habits. Adopting physical activity effectively promotes a healthier lifestyle. A physical activity recommendation system assists users to adopt daily routines to form a best practice of life by involving themselves in healthy physical activities. Traditional physical activity recommendation systems focus on general recommendations applicable to a community of users rather than specific individuals. These recommendations are general in nature and are fit for the community at a certain level, but they are not relevant to every individual based on specific requirements and personal interests. To cover this aspect, we propose a multimodal hybrid reasoning methodology (HRM) that generates personalized physical activity recommendations according to the user׳s specific needs and personal interests. The methodology integrates the rule-based reasoning (RBR), case-based reasoning (CBR), and preference-based reasoning (PBR) approaches in a linear combination that enables personalization of recommendations. RBR uses explicit knowledge rules from physical activity guidelines, CBR uses implicit knowledge from experts׳ past experiences, and PBR uses users׳ personal interests and preferences. To validate the methodology, a weight management scenario is considered and experimented with. The RBR part of the methodology generates goal, weight status, and plan recommendations, the CBR part suggests the top three relevant physical activities for executing the recommended plan, and the PBR part filters out irrelevant recommendations from the suggested ones using the user׳s personal preferences and interests. To evaluate the methodology, a baseline-RBR system is developed, which is improved first using ranged rules and ultimately using a hybrid-CBR. A comparison of the results of these systems shows that hybrid-CBR outperforms the

Recommendations on future development of decision support systems

DEFF Research Database (Denmark)

MCarthur, Stephen; Chen, Minjiang; Marinelli, Mattia

Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems......Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems...

PSA methodology development and application in Japan

International Nuclear Information System (INIS)

Kazuo Sato; Toshiaki Tobioka; Kiyoharu Abe

1987-01-01

The outlines of Japanese activities on development and application of probabilistic safety assessment (PSA) methodologies are described. First the activities on methodology development are described for system reliability analysis, operational data analysis, core melt accident analysis, environmental consequence analysis and seismic risk analysis. Then the methodoligy application examples by the regulatory side and the industry side are described. (author)

Developing educational hypermedia applications: a methodological approach

Directory of Open Access Journals (Sweden)

Jose Miguel Nunes

1996-01-01

Full Text Available This paper proposes an hypermedia development methodology with the aim of integrating the work of both educators, who will be primarily responsible for the instructional design, with that of software experts, responsible for the software design and development. Hence, it is proposed that the educators and programmers should interact in an integrated and systematic manner following a methodological approach.

Project management methodology in the public and private sector: The case of an emerging market

Directory of Open Access Journals (Sweden)

Azamat Oinarov

2017-03-01

Full Text Available Application of project management methodologies in different countries is varied. The preference of a particular methodology largely depends on the specific features of a project management system in use. The aim of the paper is to draw the attention of project-involved readers to the need to develop, not a guide, but a specific project management methodology for projects in the public-private sector. The objective pursued by the paper is to provide useful recommendations for improving the existing methodologies on project management in the public-private sector. Kazakhstan’s experience in implementing project management methodologies in its public sector is sporadic while its private sector uses of modern methodologies build on external investor proven practices. At the background of the low exposure of the public sector to the best of project management methodologies, the paper reviews existing international project management methodologies and develops useful recommendations on the methodology, most suitable for a developing country’s public-private sector, on Kazakhstan’s example.

Feasability study for waterway infrastructure: International overview and methodological recommendations

Energy Technology Data Exchange (ETDEWEB)

Santos Fontes Pereira, L. dos; Brandão, R.; Yamashita, Y.; Guilherme de Aragão, J.J.

2016-07-01

The context in which the waterway transportation is in Brazil makes clear the development need of specific methodologies for the sector planning. This paper aims to compare the methods of analysis of technical, economic and environmental viability, adopted in Europe, United States and Brazil, listing the best practices and possible improvements of the method adopted in Brazil. The analysis of the documents was based on comparative method, seeking the common elements from its attributes. Each document was analysed in terms of: its structure; type of impacts; required indicators on each impact analysis; reference values for classification of indicators; and the form of integrated analysis of different impacts. The study suggests the inclusion of certain changes in the methodology of calculation and in its combination of tools and parameters used in the measurement of fiscal impacts on the comparative analysis of standard models usually adopted in the United States, Europe and the World Bank. (Author)

Recent developments in affective recommender systems

Science.gov (United States)

Katarya, Rahul; Verma, Om Prakash

2016-11-01

Recommender systems (RSs) are playing a significant role since 1990s as they provide relevant, personalized information to the users over the internet. Lots of work have been done in information filtering, utilization, and application related to RS. However, an important area recently draws our attention which is affective recommender system. Affective recommender system (ARS) is latest trending area of research, as publication in this domain are few and recently published. ARS is associated with human behaviour, human factors, mood, senses, emotions, facial expressions, body gesture and physiological with human-computer interaction (HCI). Due to this assortment and various interests, more explanation is required, as it is in premature phase and growing as compared to other fields. So we have done literature review (LR) in the affective recommender systems by doing classification, incorporate reputed articles published from the year 2003 to February 2016. We include articles which highlight, analyse, and perform a study on affective recommender systems. This article categorizes, synthesizes, and discusses the research and development in ARS. We have classified and managed ARS papers according to different perspectives: research gaps, nature, algorithm or method adopted, datasets, the platform on executed, types of information and evaluation techniques applied. The researchers and professionals will positively support this survey article for understanding the current position, research in affective recommender systems and will guide future trends, opportunity and research focus in ARS.

Development of risk-informed assessment (RIA) design methodology

International Nuclear Information System (INIS)

Ji, S. K.; Park, S. J.; Park, B. R.; Kim, M. R.; Choi, C. J.

2001-01-01

It has been assessed that the capital cost for future nuclear power plants needs to be reduced on the order of 35% to 40% for Advanced Light Water Reactors such as KNGR and System 80+. Such reduction in the capital cost will require a fundamental re-evaluation of the industry standards and regulatory basis under which nuclear plants are designed and licensed. The objective of this study is to develop the risk-informed assessment (RIA) design methodology for future nuclear power plants. In order to meet this objective, the design simplification method is developed and RIA design methodology exercised for conceptual system. For the methodology verification, simplified conceptual ECCS and feedwater system are developed, then LOCA sensitivity analyses and agressive secondary cooldown analyses for these systems are performed. In addition, the probability safety assessment (PSA) model for LOCA is developed and the validation of RIA design methodology is demonstrated

A methodology for development of biocatalytic processes

DEFF Research Database (Denmark)

Lima Ramos, Joana

are available. The first case study presents a rational approach for defining a development strategy for multi-enzymatic processes. The proposed methodology requires a profound and structured knowledge of the multi-enzyme systems, integrating chemistry, biological and process engineering. In order to suggest......). These process metrics can often be attained by improvements in the reaction chemistry, the biocatalyst, and/or by process engineering, which often requires a complex process development strategy. Interestingly this complexity, which arises from the need for integration of biological and process technologies...... and their relationship with the overall process is not clear.The work described in this thesis presents a methodological approach for early stage development of biocatalytic processes, understanding and dealing with the reaction, biocatalyst and process constraints. When applied, this methodology has a decisive role...

CATHARE code development and assessment methodologies

International Nuclear Information System (INIS)

Micaelli, J.C.; Barre, F.; Bestion, D.

1995-01-01

The CATHARE thermal-hydraulic code has been developed jointly by Commissariat a l'Energie Atomique (CEA), Electricite de France (EdF), and Framatorne for safety analysis. Since the beginning of the project (September 1979), development and assessment activities have followed a methodology supported by two series of experimental tests: separate effects tests and integral effects tests. The purpose of this paper is to describe this methodology, the code assessment status, and the evolution to take into account two new components of this program: the modeling of three-dimensional phenomena and the requirements of code uncertainty evaluation

Development of a meta-algorithm for guiding primary care encounters for patients with multimorbidity using evidence-based and case-based guideline development methodology.

Science.gov (United States)

Muche-Borowski, Cathleen; Lühmann, Dagmar; Schäfer, Ingmar; Mundt, Rebekka; Wagner, Hans-Otto; Scherer, Martin

2017-06-22

The study aimed to develop a comprehensive algorithm (meta-algorithm) for primary care encounters of patients with multimorbidity. We used a novel, case-based and evidence-based procedure to overcome methodological difficulties in guideline development for patients with complex care needs. Systematic guideline development methodology including systematic evidence retrieval (guideline synopses), expert opinions and informal and formal consensus procedures. Primary care. The meta-algorithm was developed in six steps:1. Designing 10 case vignettes of patients with multimorbidity (common, epidemiologically confirmed disease patterns and/or particularly challenging health care needs) in a multidisciplinary workshop.2. Based on the main diagnoses, a systematic guideline synopsis of evidence-based and consensus-based clinical practice guidelines was prepared. The recommendations were prioritised according to the clinical and psychosocial characteristics of the case vignettes.3. Case vignettes along with the respective guideline recommendations were validated and specifically commented on by an external panel of practicing general practitioners (GPs).4. Guideline recommendations and experts' opinions were summarised as case specific management recommendations (N-of-one guidelines).5. Healthcare preferences of patients with multimorbidity were elicited from a systematic literature review and supplemented with information from qualitative interviews.6. All N-of-one guidelines were analysed using pattern recognition to identify common decision nodes and care elements. These elements were put together to form a generic meta-algorithm. The resulting meta-algorithm reflects the logic of a GP's encounter of a patient with multimorbidity regarding decision-making situations, communication needs and priorities. It can be filled with the complex problems of individual patients and hereby offer guidance to the practitioner. Contrary to simple, symptom-oriented algorithms, the meta

Development of analysis methodology on turbulent thermal stripping

Energy Technology Data Exchange (ETDEWEB)

Yoo, Geun Jong; Jeon, Won Dae; Han, Jin Woo; Gu, Byong Kook [Changwon National University, Changwon(Korea)

2001-03-01

For developing analysis methodology, important governing factors of thermal stripping phenomena are identified as geometric configuration and flow characteristics such as velocity. Along these factors, performance of turbulence models in existing analysis methodology are evaluated against experimental data. Status of DNS application is also accessed based on literature. Evaluation results are reflected in setting up the new analysis methodology. From the evaluation of existing analysis methodology, Full Reynolds Stress model is identified as best one among other turbulence models. And LES is found to be able to provide time dependent turbulence values. Further improvements in near-wall region and temperature variance equation are required for FRS and implementation of new sub-grid scale models is also required for LES. Through these improvements, new reliable analysis methodology for thermal stripping can be developed. 30 refs., 26 figs., 6 tabs. (Author)

Physical protection evaluation methodology program development and application

International Nuclear Information System (INIS)

Seo, Janghoon; Yoo, Hosik

2015-01-01

It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

Physical protection evaluation methodology program development and application

Energy Technology Data Exchange (ETDEWEB)

Seo, Janghoon; Yoo, Hosik [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

2015-10-15

It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

Recommended procedures and methodology of coal description

Science.gov (United States)

Chao, E.C.; Minkin, J.A.; Thompson, C.L.

1983-01-01

This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

Practical implications of rapid development methodologies

CSIR Research Space (South Africa)

Gerber, A

2007-11-01

Full Text Available as the acceleration of the system development phases through an iterative construction approach. These methodologies also claim to manage the changing nature of requirements. However, during the development of large and complex systems by a small and technically...

Recommendations for the development of e-modules for the continuing professional development of European dentists

NARCIS (Netherlands)

Kavadella, A.; Kossioni, A.E.; Tsiklakis, K.; Cowpe, J.; Bullock, A.; Barnes, E.; Bailey, S.; Thomas, H.; Thomas, R.; Karaharju-Suvanto, T.; Suomalainen, K.; Kersten, H.; Povel, E.; Giles, M.; Walmsley, D.; Soboleva, U.; Liepa, A.; Akota, I.

2013-01-01

Aims To provide evidence-based and peer-reviewed recommendations for the development of dental continuing professional development (CPD) learning e-modules. Methods The present recommendations are consensus recommendations of the DentCPD project team and were informed by a literature research,

Methodology of Credit Analysis Development

Directory of Open Access Journals (Sweden)

Slađana Neogradi

2017-12-01

Full Text Available The subject of research presented in this paper refers to the definition of methodology for the development of credit analysis in companies and its application in lending operations in the Republic of Serbia. With the developing credit market, there is a growing need for a well-developed risk and loss prevention system. In the introduction the process of bank analysis of the loan applicant is presented in order to minimize and manage the credit risk. By examining the subject matter, the process of processing the credit application is described, the procedure of analyzing the financial statements in order to get an insight into the borrower's creditworthiness. In the second part of the paper, the theoretical and methodological framework is presented applied in the concrete company. In the third part, models are presented which banks should use to protect against exposure to risks, i.e. their goal is to reduce losses on loan operations in our country, as well as to adjust to market conditions in an optimal way.

The Holistic Targeting (HOT) methodology as the means to improve Information Operations (IO) target development and prioritization

OpenAIRE

Ieva, Christopher S.

2008-01-01

Prioritization. In response to this challenge, this study proposes five recommendations to enhance IO integration into the Joint Targeting Cycle: the use of interim IO Joint Munitions Effectiveness Manual (JMEM) techniques to better forecast cognitive effects, the adoption of the Measure of Worth (MOW) model to assess IO effects, the HOT methodology to develop and prioritize IO targets, the use of compendium software facilitate targeting problem understanding and the network analysis to...

Investigating surety methodologies for cognitive systems.

Energy Technology Data Exchange (ETDEWEB)

Caudell, Thomas P. (University of New Mexico, Albuquerque, NM); Peercy, David Eugene; Mills, Kristy (University of New Mexico, Albuquerque, NM); Caldera, Eva (University of New Mexico, Albuquerque, NM)

2006-11-01

Advances in cognitive science provide a foundation for new tools that promise to advance human capabilities with significant positive impacts. As with any new technology breakthrough, associated technical and non-technical risks are involved. Sandia has mitigated both technical and non-technical risks by applying advanced surety methodologies in such areas as nuclear weapons, nuclear reactor safety, nuclear materials transport, and energy systems. In order to apply surety to the development of cognitive systems, we must understand the concepts and principles that characterize the certainty of a system's operation as well as the risk areas of cognitive sciences. This SAND report documents a preliminary spectrum of risks involved with cognitive sciences, and identifies some surety methodologies that can be applied to potentially mitigate such risks. Some potential areas for further study are recommended. In particular, a recommendation is made to develop a cognitive systems epistemology framework for more detailed study of these risk areas and applications of surety methods and techniques.

Methodology for economic evaluation of software development projects

International Nuclear Information System (INIS)

Witte, D.M.

1990-01-01

Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

Towards an MDA-based development methodology

NARCIS (Netherlands)

Gavras, Anastasius; Belaunde, Mariano; Ferreira Pires, Luis; Andrade Almeida, João; Oquendo, Flavio; Warboys, Brian C.; Morrison, Ron

2004-01-01

This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

Development of seismic risk analysis methodologies at JAERI

International Nuclear Information System (INIS)

Tanaka, T.; Abe, K.; Ebisawa, K.; Oikawa, T.

1988-01-01

The usefulness of probabilistic safety assessment (PSA) is recognized worldwidely for balanced design and regulation of nuclear power plants. In Japan, the Japan Atomic Energy Research Institute (JAERI) has been engaged in developing methodologies necessary for carrying out PSA. The research and development program was started in 1980. In those days the effort was only for internal initiator PSA. In 1985 the program was expanded so as to include external event analysis. Although this expanded program is to cover various external initiators, the current effort is dedicated for seismic risk analysis. There are three levels of seismic PSA, similarly to internal initiator PSA: Level 1: Evaluation of core damage frequency, Level 2: Evaluation of radioactive release frequency and source terms, and Level 3: Evaluation of environmental consequence. In the JAERI's program, only the methodologies for level 1 seismic PSA are under development. The methodology development for seismic risk analysis is divided into two phases. The Phase I study is to establish a whole set of simple methodologies based on currently available data. In the Phase II, Sensitivity study will be carried out to identify the parameters whose uncertainty may result in lage uncertainty in seismic risk, and For such parameters, the methodology will be upgraded. Now the Phase I study has almost been completed. In this report, outlines of the study and some of its outcomes are described

Evaluation methodology based on physical security assessment results: a utility theory approach

International Nuclear Information System (INIS)

Bennett, H.A.; Olascoaga, M.T.

1978-03-01

This report describes an evaluation methodology which aggregates physical security assessment results for nuclear facilities into an overall measure of adequacy. This methodology utilizes utility theory and conforms to a hierarchical structure developed by the NRC. Implementation of the methodology is illustrated by several examples. Recommendations for improvements in the evaluation process are given

Development of Advanced Non-LOCA Analysis Methodology for Licensing

International Nuclear Information System (INIS)

Jang, Chansu; Um, Kilsup; Choi, Jaedon

2008-01-01

KNF is developing a new design methodology on the Non-LOCA analysis for the licensing purpose. The code chosen is the best-estimate transient analysis code RETRAN and the OPR1000 is aimed as a target plant. For this purpose, KNF prepared a simple nodal scheme appropriate to the licensing analyses and developed the designer-friendly analysis tool ASSIST (Automatic Steady-State Initialization and Safety analysis Tool). To check the validity of the newly developed methodology, the single CEA withdrawal and the locked rotor accidents are analyzed by using a new methodology and are compared with current design results. Comparison results show a good agreement and it is concluded that the new design methodology can be applied to the licensing calculations for OPR1000 Non-LOCA

Illuminating the Decision Path: The Yucca Mountain Site Recommendation

Energy Technology Data Exchange (ETDEWEB)

Knox, E.; Slothouber, L.

2003-02-25

On February 14, 2002, U.S. Secretary of Energy Spencer Abraham provided to the President the ''Recommendation by the Secretary of Energy Regarding the Suitability of the Yucca Mountain Site for a Repository Under the Nuclear Waste Policy Act of 1982.'' This Recommendation, along with supporting materials, complied with statutory requirements for communicating a site recommendation to the President, and it did more: in 49 pages, the Recommendation also spoke directly to the Nation, illuminating the methodology and considerations that led toward the decision to recommend the site. Addressing technical suitability, national interests, and public concerns, the Recommendation helped the public understand the potential risks and benefits of repository development and placed those risks and benefits in a meaningful national context.

Illuminating the Decision Path: The Yucca Mountain Site Recommendation

International Nuclear Information System (INIS)

Knox, E.; Slothouber, L.

2003-01-01

On February 14, 2002, U.S. Secretary of Energy Spencer Abraham provided to the President the ''Recommendation by the Secretary of Energy Regarding the Suitability of the Yucca Mountain Site for a Repository Under the Nuclear Waste Policy Act of 1982.'' This Recommendation, along with supporting materials, complied with statutory requirements for communicating a site recommendation to the President, and it did more: in 49 pages, the Recommendation also spoke directly to the Nation, illuminating the methodology and considerations that led toward the decision to recommend the site. Addressing technical suitability, national interests, and public concerns, the Recommendation helped the public understand the potential risks and benefits of repository development and placed those risks and benefits in a meaningful national context

ISE System Development Methodology Manual

Energy Technology Data Exchange (ETDEWEB)

Hayhoe, G.F.

1992-02-17

The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

Development of Proliferation Resistance Assessment Methodology Based on International Standards

International Nuclear Information System (INIS)

Lee, Yong Deok; Lee, Jung Won; Lee, Kwang Seok

2009-03-01

Proliferation resistance is one of the requirement to be met in GEN IV and INPRO for next generation nuclear energy system. Internationally, the evaluation methodology on PR had been already initiated from 1980, but the systematic development was started at 2000s. In Korea, for the export of nuclear energy system and the increase of international credibility and transparence of domestic nuclear system and fuel cycle development, the independent development of PR evaluation methodology was started in 2007 as a nuclear long term R and D project and the development is being performed for the model of PR evaluation methodology. In 1st year, comparative study of GEN-IV/INPRO, PR indicator development, quantification of indicator and evaluation model development, analysis of technology system and international technology development trend had been performed. In 2nd year, feasibility study of indicator, allowable limit of indicator, review of technical requirement of indicator were done. The results of PR evaluation must be applied in the beginning of conceptual design of nuclear system. Through the technology development of PR evaluation methodology, the methodology will be applied in the regulatory requirement for authorization and permission to be developed

Service Innovation Methodologies II : How can new product development methodologies be applied to service innovation and new service development? : Report no 2 from the TIPVIS-project

OpenAIRE

Nysveen, Herbjørn; Pedersen, Per E.; Aas, Tor Helge

2007-01-01

This report presents various methodologies used in new product development and product innovation and discusses the relevance of these methodologies for service development and service innovation. The service innovation relevance for all of the methodologies presented is evaluated along several service specific dimensions, like intangibility, inseparability, heterogeneity, perishability, information intensity, and co-creation. The methodologies discussed are mainly collect...

DEVELOPMENT OF METHODOLOGY FOR DESIGNING TESTABLE COMPONENT STRUCTURE OF DISCIPLINARY COMPETENCE

Directory of Open Access Journals (Sweden)

Vladimir I. Freyman

2014-01-01

Full Text Available The aim of the study is to present new methods of quality results assessment of the education corresponding to requirements of Federal State Educational Standards (FSES of the Third Generation developed for the higher school. The urgency of search of adequate tools for quality competency measurement and its elements formed in the course of experts’ preparation are specified. Methods. It is necessary to consider interference of competency components such as knowledge, abilities, possession in order to make procedures of assessment of students’ achievements within the limits of separate discipline or curriculum section more convenient, effective and exact. While modeling of component structure of the disciplinary competence the testable design of components is used; the approach borrowed from technical diagnostics. Results. The research outcomes include the definition and analysis of general iterative methodology for testable designing component structure of the disciplinary competence. Application of the proposed methodology is illustrated as the example of an abstract academic discipline with specified data and index of labour requirement. Methodology restrictions are noted; practical recommendations are given. Scientific novelty. Basic data and a detailed step-by-step implementation phase of the proposed common iterative approach to the development of disciplinary competence testable component structure are considered. Tests and diagnostic tables for different options of designing are proposed. Practical significance. The research findings can help promoting learning efficiency increase, a choice of adequate control devices, accuracy of assessment, and also efficient use of personnel, temporal and material resources of higher education institutions. Proposed algorithms, methods and approaches to procedure of control results organization and realization of developed competences and its components can be used as methodical base while

Risk-Informed Assessment Methodology Development and Application

International Nuclear Information System (INIS)

Sung Goo Chi; Seok Jeong Park; Chul Jin Choi; Ritterbusch, S.E.; Jacob, M.C.

2002-01-01

Westinghouse Electric Company (WEC) has been working with Korea Power Engineering Company (KOPEC) on a US Department of Energy (DOE) sponsored Nuclear Energy Research Initiative (NERI) project through a collaborative agreement established for the domestic NERI program. The project deals with Risk-Informed Assessment (RIA) of regulatory and design requirements of future nuclear power plants. An objective of the RIA project is to develop a risk-informed design process, which focuses on identifying and incorporating advanced features into future nuclear power plants (NPPs) that would meet risk goals in a cost-effective manner. The RIA design methodology is proposed to accomplish this objective. This paper discusses the development of this methodology and demonstrates its application in the design of plant systems for future NPPs. Advanced conceptual plant systems consisting of an advanced Emergency Core Cooling System (ECCS) and Emergency Feedwater System (EFWS) for a NPP were developed and the risk-informed design process was exercised to demonstrate the viability and feasibility of the RIA design methodology. Best estimate Loss-of-Coolant Accident (LOCA) analyses were performed to validate the PSA success criteria for the NPP. The results of the analyses show that the PSA success criteria can be met using the advanced conceptual systems and that the RIA design methodology is a viable and appropriate means of designing key features of risk-significant NPP systems. (authors)

Nuclear power plant simulation facility evaluation methodology

International Nuclear Information System (INIS)

Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

1985-01-01

A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

The fractional scaling methodology (FSM) Part 1. methodology development

International Nuclear Information System (INIS)

Novak Zuber; Ivan Catton; Upendra S Rohatgi; Wolfgang Wulff

2005-01-01

Full text of publication follows: a quantitative methodology is developed, based on the concepts of hierarchy and synthesis, to integrate and organize information and data. The methodology uses scaling to synthesize experimental data and analytical results, and to provide quantitative criteria for evaluating the effects of various design and operating parameters that influence processes in a complex system such as a nuclear power plant or a related test facility. Synthesis and scaling are performed on three hierarchical levels: the process, component and system levels. Scaling on the process level determines the effect of a selected process on a particular state variable during a selected scenario. At the component level this scaling determines the effects various processes have on a state variable, and it ranks the processes according to their importance by the magnitude of the fractional change they cause on that state variable. At the system level the scaling determines the governing processes and corresponding components, ranking these in the order of importance according to their effect on the fractional change of system-wide state variables. The scaling methodology reveals on all levels the fractional change of state variables and is called therefore the Fractional Scaling Methodology (FSM). FSM synthesizes process parameters and assigns to each thermohydraulic process a dimensionless effect metric Ω = ωt, that is the product of the specific rate of fractional change ω and the characteristic time t. The rate of fractional change ω is the ratio of process transport rate over content of a preserved quantity in a component. The effect metric Ω quantifies the contribution of the process to the fractional change of a state variable in a given component. Ordering of a component effect metrics provides the hierarchy of processes in a component, then in all components and the system. FSM separates quantitatively dominant from minor processes and components and

Preliminary safety analysis methodology for the SMART

Energy Technology Data Exchange (ETDEWEB)

Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-03-01

This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

The Typology of Methodological Approaches to Development of Innovative Clusters

Directory of Open Access Journals (Sweden)

Farat Olexandra V.

2017-06-01

Full Text Available The aim of the article is to study the existing methodological approaches to assessing the development of enterprises for further substantiation of possibilities of their using by cluster associations. As a result of research, based on the analysis of scientific literature, the most applicable methodological approaches to assessing the development of enterprises are characterized. 8 methodical approaches to assessing the level of development of enterprises and 4 methodological approaches to assessing the level of development of clusters are singled out. Each of the approaches is characterized by the presence of certain advantages and disadvantages, but none of them allows to obtain a systematic assessment of all areas of cluster functioning, identify possible reserves for cluster competitiveness growth and characterize possible strategies for their future development. Taking into account peculiarities of the functioning and development of cluster associations of enterprises, we propose our own methodological approach for assessing the development of innovative cluster structures.

Ada developers' supplement to the recommended approach

Science.gov (United States)

Kester, Rush; Landis, Linda

1993-01-01

This document is a collection of guidelines for programmers and managers who are responsible for the development of flight dynamics applications in Ada. It is intended to be used in conjunction with the Recommended Approach to Software Development (SEL-81-305), which describes the software development life cycle, its products, reviews, methods, tools, and measures. The Ada Developers' Supplement provides additional detail on such topics as reuse, object-oriented analysis, and object-oriented design.

Recommendations for the organization of mental health services for children and adolescents in Belgium: use of the soft systems methodology.

Science.gov (United States)

Vandenbroeck, Philippe; Dechenne, Rachel; Becher, Kim; Eyssen, Marijke; Van den Heede, Koen

2014-02-01

The prevalence of mental health problems among children and adolescents in Western countries is high. Belgium, like many other Western countries, struggles with the set-up of a coherent and effective strategy for dealing with this complex societal problem. This paper describes the development of a policy scenario for the organization of child and adolescent mental health care services (CAMHS) in Belgium. The development process relied on Soft Systems Methodology including a participatory process with 66 stakeholders and a review of the existing (inter-)national evidence. A diagnostic analysis illustrated that the Belgian CAMHS is a system in serious trouble characterized by fragmentation and compartmentalization. A set of 10 strategic recommendations was formulated to lay down the contours of a future, more effective CAMHS system. They focus on mastering the demands made on scarce and expensive specialized mental health services; strengthening the range of services - in particular for those with serious, complex and multiple mental health problems - and strengthening the adaptive capacity of and the ethical guidance within the future CAMHS system. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

A Comparison of Various Software Development Methodologies: Feasibility and Methods of Integration

Directory of Open Access Journals (Sweden)

Samir Abou El-Seoud

2016-12-01

Full Text Available System development methodologies which have being used in the academic and commercial environments during last two decades have advantages and disadvantages. Researchers had tried to identify objectives, scope …etc. of the methodologies by following different approaches. Each approach has its Limitation, specific interest, coverage …etc. In this paper, we tried to perform a comparative study of those methodologies which are popular and commonly used in banking and commercial environment. We tried in our study to determine objectives, scope, tools and other features of the methodologies. We also, tried to determine how and to what extent the methodologies incorporate the facilities such as project management, cost benefit analysis, documentation …etc. One of the most important aspects of our study was how to integrate the methodologies and develop a global methodology which covers the complete span of the software development life cycle? A prototype system which integrates the selected methodologies has been developed. The developed system helps analysts and designers how to choose suitable tools or to obtain guidelines on what to do in a particular situation. The prototype system has been tested during the development of a software for an ATM “Auto Teller Machine” by selecting and applying SASD methodology during software development. This resulted in the development of high quality and well documented software system.

A methodology for practical implementation of ICRP recommendations for optimization

International Nuclear Information System (INIS)

Webb, G.A.M.; Clarke, R.H.

1979-01-01

The system of dose limitation recommended by the Commission has been restated in its most recent recommendations with the requirements implying cost benefit analysis elevated to pride of place. The main subject of this paper is discussion of the problems involved in carrying out differential cost benefit analysis (optimization) studies. The various quantities such as Effective Dose Equivalent and Collective Effective Dose Equivalent Commitment needed to carry out these studies are discussed, their strengths and weaknesses identified and suggestions made as to how they should be used in practice. In particular the implications underlying the use of the collective quantities as the independent variable in these studies are clarified and examined. The need for the maximum realism in calculational models and parameters used in the calculation of collective quantities for optimization studies is stressed, with the corollary of conservative calculations for comparison with dose limits. The methods for calculating costs are examined, both for the plant or equipment installed to reduce doses and for the cost associated with the consequent reduction in health detriment. Some practical problems are cited in both the theory and practice of optimization. It is concluded that optimization is not yet sufficiently developed in either basic formalism or practical application. Some areas are identified where further work is needed. (author)

A dynamic systems engineering methodology research study. Phase 2: Evaluating methodologies, tools, and techniques for applicability to NASA's systems projects

Science.gov (United States)

Paul, Arthur S.; Gill, Tepper L.; Maclin, Arlene P.

1989-01-01

A study of NASA's Systems Management Policy (SMP) concluded that the primary methodology being used by the Mission Operations and Data Systems Directorate and its subordinate, the Networks Division, is very effective. Still some unmet needs were identified. This study involved evaluating methodologies, tools, and techniques with the potential for resolving the previously identified deficiencies. Six preselected methodologies being used by other organizations with similar development problems were studied. The study revealed a wide range of significant differences in structure. Each system had some strengths but none will satisfy all of the needs of the Networks Division. Areas for improvement of the methodology being used by the Networks Division are listed with recommendations for specific action.

Developing a semantic web model for medical differential diagnosis recommendation.

Science.gov (United States)

Mohammed, Osama; Benlamri, Rachid

2014-10-01

In this paper we describe a novel model for differential diagnosis designed to make recommendations by utilizing semantic web technologies. The model is a response to a number of requirements, ranging from incorporating essential clinical diagnostic semantics to the integration of data mining for the process of identifying candidate diseases that best explain a set of clinical features. We introduce two major components, which we find essential to the construction of an integral differential diagnosis recommendation model: the evidence-based recommender component and the proximity-based recommender component. Both approaches are driven by disease diagnosis ontologies designed specifically to enable the process of generating diagnostic recommendations. These ontologies are the disease symptom ontology and the patient ontology. The evidence-based diagnosis process develops dynamic rules based on standardized clinical pathways. The proximity-based component employs data mining to provide clinicians with diagnosis predictions, as well as generates new diagnosis rules from provided training datasets. This article describes the integration between these two components along with the developed diagnosis ontologies to form a novel medical differential diagnosis recommendation model. This article also provides test cases from the implementation of the overall model, which shows quite promising diagnostic recommendation results.

Development of an Evaluation Methodology for Triple Bottom Line Reports Using International Standards on Reporting

Science.gov (United States)

Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

2009-08-01

The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

Development of an evaluation methodology for triple bottom line reports using international standards on reporting.

Science.gov (United States)

Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

2009-08-01

The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

Evolution of courseware development methodology : recent issues

NARCIS (Netherlands)

Moonen, J.C.M.M.; Schoenmaker, Jan

1992-01-01

To improve the quality of courseware products and the efficiency of the courseware development process, a methodology based upon "courseware engineering", being a combination of instructional systems development and software engineering, has emerged over the last 10¿15 years. Recently, software

Shilling Attack Prevention for Recommender Systems Using Social-based Clustering

KAUST Repository

Lee, Tak

2011-06-06

A Recommender System (RS) is a system that utilizes user and item information to predict the feeling of users towards unfamiliar items. Recommender Systems have become popular tools for online stores due to their usefulness in confidently recommending items to users. A popular algorithm for recommender system is Collaborative Filtering (CF). CF uses other users\\' profiles to predict whether a user is interested in a particular object. This system, however, is vulnerable to malicious users seeking to promote items by manipulating rating predictions with fake user profiles. Profiles with behaviors similar to "victim" users alter the prediction of a Recommender System. Manipulating rating predictions through injected profiles is referred to as a shilling attack. It is important to develop shilling attack prevention frameworks for to protect the trustworthiness of Recommender Systems. In this thesis, we will demonstrate a new methodology that utilizes social information to prevent malicious users from manipulating the prediction system. The key element in our new methodology rests upon the concept of trust among real users, an element we claim absent among malicious profiles. In order to use trust information for shilling attack prevention, we first develop a weighting system which makes the system rely more on trustworthy users when making predictions. We then use this trust information to cluster out untrustworthy users to improve rating robustness. The robustness of the new and classic systems is then evaluated with data from a public commercial consumer RS, Epinions.com. Several complexity reduction procedures are also introduced to make implementing the algorithms mentioned possible for a huge commercial database.

Establishment of Requirements and Methodology for the Development and Implementation of GreyMatters, a Memory Clinic Information System.

Science.gov (United States)

Tapuria, Archana; Evans, Matt; Curcin, Vasa; Austin, Tony; Lea, Nathan; Kalra, Dipak

2017-01-01

The aim of the paper is to establish the requirements and methodology for the development process of GreyMatters, a memory clinic system, outlining the conceptual, practical, technical and ethical challenges, and the experiences of capturing clinical and research oriented data along with the implementation of the system. The methodology for development of the information system involved phases of requirements gathering, modeling and prototype creation, and 'bench testing' the prototype with experts. The standard Institute of Electrical and Electronics Engineers (IEEE) recommended approach for the specifications of software requirements was adopted. An electronic health record (EHR) standard, EN13606 was used, and clinical modelling was done through archetypes and the project complied with data protection and privacy legislation. The requirements for GreyMatters were established. Though the initial development was complex, the requirements, methodology and standards adopted made the construction, deployment, adoption and population of a memory clinic and research database feasible. The electronic patient data including the assessment scales provides a rich source of objective data for audits and research and to establish study feasibility and identify potential participants for the clinical trials. The establishment of requirements and methodology, addressing issues of data security and confidentiality, future data compatibility and interoperability and medico-legal aspects such as access controls and audit trails, led to a robust and useful system. The evaluation supports that the system is an acceptable tool for clinical, administrative, and research use and forms a useful part of the wider information architecture.

Cooperative learning as a methodology for inclusive education development

Directory of Open Access Journals (Sweden)

Yolanda Muñoz Martínez

2017-06-01

Full Text Available This paper presents the methodology of cooperative learning as a strategy to develop the principles of inclusive education. It has a very practical orientation, with the intention of providing tools for teachers who want to implement this methodology in the classroom, starting with a theoretical review, and then a description of a case in which they have worked this methodology for 5 years. We describe specific activities and ways of working with students, later reaching conclusions on the implementation of the methodology.

Developing Federal Clinical Care Recommendations for Women.

Science.gov (United States)

Godfrey, Emily M; Tepper, Naomi K; Curtis, Kathryn M; Moskosky, Susan B; Gavin, Loretta E

2015-08-01

The provision of family planning services has important health benefits for the U.S. Approximately 25 million women in the U.S. receive contraceptive services annually and 44 million make at least one family planning-related clinical visit each year. These services are provided by private clinicians, as well as publicly funded clinics, including specialty family planning clinics, health departments, Planned Parenthoods, community health centers, and primary care clinics. Recommendations for providing quality family planning services have been published by CDC and the Office of Population Affairs of the DHHS. This paper describes the process used to develop the women's clinical services portion of the new recommendations and the rationale underpinning them. The recommendations define family planning services as contraceptive care, pregnancy testing and counseling, achieving pregnancy, basic infertility care, sexually transmitted disease services, and preconception health. Because many women who seek family planning services have no other source of care, the recommendations also include additional screening services related to women's health, such as cervical cancer screening. These clinical guidelines are aimed at providing the highest-quality care and are designed to establish a national standard for family planning in the U.S. Published by Elsevier Inc.

Assessing FDG-PET diagnostic accuracy studies to develop recommendations for clinical use in dementia.

Science.gov (United States)

Boccardi, Marina; Festari, Cristina; Altomare, Daniele; Gandolfo, Federica; Orini, Stefania; Nobili, Flavio; Frisoni, Giovanni B

2018-04-30

FDG-PET is frequently used as a marker of synaptic damage to diagnose dementing neurodegenerative disorders. We aimed to adapt the items of evidence quality to FDG-PET diagnostic studies, and assess the evidence available in current literature to assist Delphi decisions for European recommendations for clinical use. Based on acknowledged methodological guidance, we defined the domains, specific to FDG-PET, required to assess the quality of evidence in 21 literature searches addressing as many Population Intervention Comparison Outcome (PICO) questions. We ranked findings for each PICO and fed experts making Delphi decisions for recommending clinical use. Among the 1435 retrieved studies, most lacked validated measures of test performance, an adequate gold standard, and head-to-head comparison of FDG-PET and clinical diagnosis, and only 58 entered detailed assessment. Only two studies assessed the accuracy of the comparator (clinical diagnosis) versus any kind of gold-/reference-standard. As to the index-test (FDG-PET-based diagnosis), an independent gold-standard was available in 24% of the examined papers; 38% used an acceptable reference-standard (clinical follow-up); and 38% compared FDG-PET-based diagnosis only to baseline clinical diagnosis. These methodological limitations did not allow for deriving recommendations from evidence. An incremental diagnostic value of FDG-PET versus clinical diagnosis or lack thereof cannot be derived from the current literature. Many of the observed limitations may easily be overcome, and we outlined them as research priorities to improve the quality of current evidence. Such improvement is necessary to outline evidence-based guidelines. The available data were anyway provided to expert clinicians who defined interim recommendations.

Research program for seismic qualification of nuclear plant electrical and mechanical equipment. Task 3. Recommendations for improvement of equipment qualification methodology and criteria. Volume 3

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1984-08-01

The Research Program for Seismic Qualification of Nuclear Plant Electrical and Mechanical Equipment has spanned a period of three years and resulted in seven technical summary reports, each of which covered in detail the findings of different tasks and subtasks, and have been combined into five NUREG/CR volumes. Volume 3 presents recommendations for improvement of equipment qualification methodology and procedural clarification/modification. The fifth category identifies issues where adequate information does not exist to allow a recommendation to be made

KLIMAT 'Best practice' methodology; KLIMAT 'Best practice' metodikk

Energy Technology Data Exchange (ETDEWEB)

Svanes, Erik; Moeller, Hanne

2012-07-01

This report summarizes the main lessons learned from the research The climate challenge of food products in a holistic environmental and life cycle perspective, abbreviated KLIMAT. This was a research project in the period 2009-2012, conducted by Oestfoldforskning with the assistance of researchers from UMB, SIK (Sweden), MTT (Finland) and Aalborg University (Denmark). The project was funded by the Norwegian Research Council and its partners BAMA, Coop Norway, Norway Group, Nortura and Tine. The main objective of the project was to develop a uniform and scientifically based methodology to quantify the carbon footprint of food products to allow a fair comparison of food crops climate performance. This report summarizes a number of recommendations with regard to methodological choices in the implementation of greenhouse trace analysis of foodstuffs. The recommendations are divided into system boundaries, functional unit, allocation, and data quality and data variability. During the project period, a number of national and international initiatives have been launched to develop the calculation methodology. Therefore the objective of creating a standardized methodology was adjusted to prepare input to the methodology in the form of articles and reports.(Author)

Development and validation of a CFD based methodology to estimate the pressure loss of flow through perforated plates

International Nuclear Information System (INIS)

Barros Filho, Jose A.; Navarro, Moyses A.; Santos, Andre A.C. dos; Jordao, E.

2011-01-01

In spite of the recent great development of Computational Fluid Dynamics (CFD), there are still some issues about how to assess its accurateness. This work presents the validation of a CFD methodology devised to estimate the pressure drop of water flow through perforated plates similar to the ones used in some reactor core components. This was accomplished by comparing the results of CFD simulations against experimental data of 5 perforated plates with different geometric characteristics. The proposed methodology correlates the experimental data within a range of ± 7.5%. The validation procedure recommended by the ASME Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer-V and V 20 is also evaluated. The conclusion is that it is not adequate to this specific use. (author)

Large sample NAA facility and methodology development

International Nuclear Information System (INIS)

Roth, C.; Gugiu, D.; Barbos, D.; Datcu, A.; Aioanei, L.; Dobrea, D.; Taroiu, I. E.; Bucsa, A.; Ghinescu, A.

2013-01-01

A Large Sample Neutron Activation Analysis (LSNAA) facility has been developed at the TRIGA- Annular Core Pulsed Reactor (ACPR) operated by the Institute for Nuclear Research in Pitesti, Romania. The central irradiation cavity of the ACPR core can accommodate a large irradiation device. The ACPR neutron flux characteristics are well known and spectrum adjustment techniques have been successfully applied to enhance the thermal component of the neutron flux in the central irradiation cavity. An analysis methodology was developed by using the MCNP code in order to estimate counting efficiency and correction factors for the major perturbing phenomena. Test experiments, comparison with classical instrumental neutron activation analysis (INAA) methods and international inter-comparison exercise have been performed to validate the new methodology. (authors)

A review of methodologies used in research on cadastral development

DEFF Research Database (Denmark)

Silva, Maria Augusta; Stubkjær, Erik

2002-01-01

to the acceptance of research methodologies needed for cadastral development, and thereby enhance theory in the cadastral domain. The paper reviews nine publica-tions on cadastre and identifies the methodologies used. The review focuses on the institutional, social political and economic aspects of cadastral......World-wide, much attention has been given to cadastral development. As a consequence of experiences made during the last decades, several authors have stated the need of research in the domain of cadastre and proposed methodologies to be used. The purpose of this paper is to contribute...... development, rather than on the technical aspects. The main conclusion of this paper is that the methodologies used are largely those of the social sciences. That agrees with the notion that cadastre relates as much to people and institutions, as it relates to land, and that cadastral systems are shaped...

Baseline methodologies for clean development mechanism projects

Energy Technology Data Exchange (ETDEWEB)

Lee, M.K. (ed.); Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

2005-11-15

The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

Baseline methodologies for clean development mechanism projects

International Nuclear Information System (INIS)

Lee, M.K.; Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

2005-11-01

The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

Machine learning paradigms applications in recommender systems

CERN Document Server

Lampropoulos, Aristomenis S

2015-01-01

This timely book presents Applications in Recommender Systems which are making recommendations using machine learning algorithms trained via examples of content the user likes or dislikes. Recommender systems built on the assumption of availability of both positive and negative examples do not perform well when negative examples are rare. It is exactly this problem that the authors address in the monograph at hand. Specifically, the books approach is based on one-class classification methodologies that have been appearing in recent machine learning research. The blending of recommender systems and one-class classification provides a new very fertile field for research, innovation and development with potential applications in “big data” as well as “sparse data” problems. The book will be useful to researchers, practitioners and graduate students dealing with problems of extensive and complex data. It is intended for both the expert/researcher in the fields of Pattern Recognition, Machine Learning and ...

Developing knowledge management systems with an active expert methodology

International Nuclear Information System (INIS)

Sandahl, K.

1992-01-01

Knowledge management, understood as the ability to store, distribute and utilize human knowledge in an organization, is the subject of this dissertation. In particular we have studied the design of methods and supporting software for this process. Detailed and systematic description of the design and development processes of three case-study implementations of knowledge management software are provided. The outcome of the projects is explained in terms of an active expert development methodology, which is centered around support for a domain expert to take substantial responsibility for the design and maintenance of a knowledge management system in a given area of application. Based on the experiences from the case studies and the resulting methodology, an environment for automatically supporting knowledge management was designed in the KNOWLEDGE-LINKER research project. The vital part of this architecture is a knowledge acquisition tool, used directly by the experts in creating and maintaining a knowledge base. An elaborated version of the active expert development methodology was then formulated as the result of applying the KNOWLEDGE-LINKER approach in a fourth case study. This version of the methodology is also accounted for and evaluated together within the supporting KNOWLEDGE-LINKER architecture. (au)

Mikhail Geraskov (1874-1957 Methodological Concepts of Learning Physics.

Directory of Open Access Journals (Sweden)

Mariyana Ilieva

2014-02-01

Full Text Available Mikhail Geraskov is a distinguished Bulgarian educator from the first half of the twentieth century, who developed the scientific foundations of didactics and methodology of training. His work contributed a lot to the development of the Bulgarian pedagogy. The subject of scientific research is didactical conceptions and methodological conceptions of learning. The aim of the research paper is to presents his ideas about particular methods of teaching Physics for high school. Geraskov assumes direct correlation between didactics and methodology. This paper focuses on his ideas about design, technology and methodological requirements for lessons of Physics. He believes that the appropriate methods are determined by the curriculum, set of educational goals and age characteristics, and capabilities of adolescents. In his methodical recommendations he focuses on teaching methods and forms that provoke students’ activity. Comparative analysis with publications on the issues set for development of the Bulgarian pedagogic science and the actuality in the modern education system.

Applying GRADE-CERQual to qualitative evidence synthesis findings-paper 3: how to assess methodological limitations.

Science.gov (United States)

Munthe-Kaas, Heather; Bohren, Meghan A; Glenton, Claire; Lewin, Simon; Noyes, Jane; Tunçalp, Özge; Booth, Andrew; Garside, Ruth; Colvin, Christopher J; Wainwright, Megan; Rashidian, Arash; Flottorp, Signe; Carlsen, Benedicte

2018-01-25

The GRADE-CERQual (Confidence in Evidence from Reviews of Qualitative research) approach has been developed by the GRADE (Grading of Recommendations Assessment, Development and Evaluation) Working Group. The approach has been developed to support the use of findings from qualitative evidence syntheses in decision-making, including guideline development and policy formulation. CERQual includes four components for assessing how much confidence to place in findings from reviews of qualitative research (also referred to as qualitative evidence syntheses): (1) methodological limitations, (2) coherence, (3) adequacy of data and (4) relevance. This paper is part of a series providing guidance on how to apply CERQual and focuses on CERQual's methodological limitations component. We developed the methodological limitations component by searching the literature for definitions, gathering feedback from relevant research communities and developing consensus through project group meetings. We tested the CERQual methodological limitations component within several qualitative evidence syntheses before agreeing on the current definition and principles for application. When applying CERQual, we define methodological limitations as the extent to which there are concerns about the design or conduct of the primary studies that contributed evidence to an individual review finding. In this paper, we describe the methodological limitations component and its rationale and offer guidance on how to assess methodological limitations of a review finding as part of the CERQual approach. This guidance outlines the information required to assess methodological limitations component, the steps that need to be taken to assess methodological limitations of data contributing to a review finding and examples of methodological limitation assessments. This paper provides guidance for review authors and others on undertaking an assessment of methodological limitations in the context of the CERQual

I. DEVELOPMENTAL METHODOLOGY AS A CENTRAL SUBDISCIPLINE OF DEVELOPMENTAL SCIENCE.

Science.gov (United States)

Card, Noel A

2017-06-01

This first chapter introduces the main goals of the monograph and previews the remaining chapters. The goals of this monograph are to provide summaries of our current understanding of advanced developmental methodologies, provide information that can advance our understanding of human development, identify shortcomings in our understanding of developmental methodology, and serve as a flagpost for organizing developmental methodology as a subdiscipline within the broader field of developmental science. The remaining chapters in this monograph address issues in design (sampling and big data), longitudinal data analysis, and issues of replication and research accumulation. The final chapter describes the history of developmental methodology, considers how the previous chapters in this monograph fit within this subdiscipline, and offers recommendations for further advancement. © 2017 The Society for Research in Child Development, Inc.

Development of a Teaching Methodology for Undergraduate Human Development in Psychology

Science.gov (United States)

Rodriguez, Maria A.; Espinoza, José M.

2015-01-01

The development of a teaching methodology for the undergraduate Psychology course Human Development II in a private university in Lima, Peru is described. The theoretical framework consisted of an integration of Citizen Science and Service Learning, with the application of Information and Communications Technology (ICT), specifically Wikipedia and…

Development of a Long Term Cooling Analysis Methodology Using Rappel

International Nuclear Information System (INIS)

Lee, S. I.; Jeong, J. H.; Ban, C. H.; Oh, S. J.

2012-01-01

Since the revision of the 10CFR50.46 in 1988, which allowed BE (Best-Estimate) method in analyzing the safety performance of a nuclear power plant, safety analysis methodologies have been changed continuously from conservative EM (Evaluation Model) approaches to BE ones. In this context, LSC (Long-Term core Cooling) methodologies have been reviewed by the regulatory bodies of USA and Korea. Some non-conservatism and improperness of the old methodology have been identified, and as a result, USNRC suspended the approval of CENPD-254-P-A which is the old LSC methodology for CE-designed NPPs. Regulatory bodies requested to remove the non-conservatisms and to reflect system transient behaviors in all the LSC methodologies used. In the present study, a new LSC methodology using RELAP5 is developed. RELAP5 and a newly developed code, BACON (Boric Acid Concentration Of Nuclear power plant) are used to calculate the transient behavior of the system and the boric acid concentration, respectively. Full range of break spectrum is considered and the applicability is confirmed through plant demonstration calculations. The result shows a good comparison with the old-fashioned ones, therefore, the methodology could be applied with no significant changes of current LSC plans

THEORETIC AND METHODOLOGIC BASICS OF DEVELOPMENT OF THE NATIONAL LOGISTICS SYSTEM IN THE REPUBLIC OF BELARUS

Directory of Open Access Journals (Sweden)

R. B. Ivut

2016-01-01

Full Text Available The article presents the results of a study, the aim of which is the formation of the theoretical and methodological foundations in the framework of scientific maintenance for the further development processes of the national logistics system in the Republic of Belarus. The relevance of the study relates to the fact that at present the introduction of the concept of logistics and the formation of the optimal infrastructure for its implementation are the key factors for economic development of Belarus as a transit country. At the same time the pace of development of the logistic activities in the country is currently slightly lower in comparison with the neighboring countries, as evidenced by the dynamics of the country’s position in international rankings (in particular, according to the LPI index. Overcoming these gaps requires improved competitiveness of the logistics infrastructure in the international market. This, in turn, is possible due to the clear formulation and adherence of the effective functioning principles for macro logistics system of Belarus, as well as by increasing the quality of logistics design by means of applying econometric models and methods presented in the article. The proposed auctorial approach is the differentiation of the general principles of logistics specific to the logistics systems of all levels, and the specific principles of development of the macro level logistics system related to improving its transit attractiveness for international freight carriers. The study also systematizes the model for determining the optimal location of logistics facilities. Particular attention is paid to the methodological basis of the analysis of transport terminals functioning as part of the logistics centers both in the stages of design and operation. The developed theoretical and methodological recommendations are universal and can be used in the design of the logistics infrastructure for various purposes and functions

Applying of component system development in object methodology, case study

Directory of Open Access Journals (Sweden)

Milan Mišovič

2013-01-01

Full Text Available To create computarization target software as a component system has been a very strong requirement for the last 20 years of software developing. Finally, the architectural components are self-contained units, presenting not only partial and overall system behavior, but also cooperating with each other on the basis of their interfaces. Among others, components have allowed flexible modification of processes the behavior of which is the foundation of components behavior without changing the life of the component system. On the other hand, the component system makes it possible, at design time, to create numerous new connections between components and thus creating modified system behaviors. This all enables the company management to perform, at design time, required behavioral changes of processes in accordance with the requirements of changing production and market.The development of software which is generally referred to as SDP (Software Development Process contains two directions. The first one, called CBD (Component–Based Development, is dedicated to the development of component–based systems CBS (Component–based System, the second target is the development of software under the influence of SOA (Service–Oriented Architecture. Both directions are equipped with their different development methodologies. The subject of this paper is only the first direction and application of development of component–based systems in its object–oriented methodologies. The requirement of today is to carry out the development of component-based systems in the framework of developed object–oriented methodologies precisely in the way of a dominant style. In some of the known methodologies, however, this development is not completely transparent and is not even recognized as dominant. In some cases, it is corrected by the special meta–integration models of component system development into an object methodology.This paper presents a case study

Development of a comprehensive management site evaluation methodology

International Nuclear Information System (INIS)

Rodgers, J.C.; Onishi, Y.

1981-01-01

The Nuclear Regulatory Commission is in the process of preparing regulations that will define the necessary conditions for adequate disposal of low-level waste (LLW) by confinement in an LLW disposal facility. These proposed regulations form the context in which the motivation for the joint Los Alamos National Laboratory Battelle Pacific Northwest Laboratory program to develop a site-specific, LLW site evaluation methodology is discussed. The overall effort is divided into three development areas: land-use evaluation, environmental transport modelling, and long term scenario development including long-range climatology projections. At the present time four steps are envisioned in the application of the methodology to a site: site land use suitability assessment, land use-ecosystem interaction, contaminant transport simulation, and sensitivity analysis. Each of these steps is discussed in the paper. 12 refs

Development methodology for industrial diesel engines; Entwicklungsmethode fuer Industrie-Dieselmotoren

Energy Technology Data Exchange (ETDEWEB)

Bergmann, Dirk; Kech, Johannes [MTU Friedrichshafen GmbH (Germany)

2011-11-15

In order to remain cost-effective with relatively low production volumes in spite of the high requirements regarding emissions and durability, MTU uses a clearly structured development methodology with a close interlinking of technology and product development in the development of its large engines. For the new engine of the 4000 Series with cooled EGR, MTU applied this methodology in order to implement the emissions concept from the initial idea right through to the serial product. (orig.)

Methodology for Estimating Ingestion Dose for Emergency Response at SRS

CERN Document Server

Simpkins, A A

2002-01-01

At the Savannah River Site (SRS), emergency response models estimate dose for inhalation and ground shine pathways. A methodology has been developed to incorporate ingestion doses into the emergency response models. The methodology follows a two-phase approach. The first phase estimates site-specific derived response levels (DRLs) which can be compared with predicted ground-level concentrations to determine if intervention is needed to protect the public. This phase uses accepted methods with little deviation from recommended guidance. The second phase uses site-specific data to estimate a 'best estimate' dose to offsite individuals from ingestion of foodstuffs. While this method deviates from recommended guidance, it is technically defensibly and more realistic. As guidance is updated, these methods also will need to be updated.

A study on methodological of software development for HEP

International Nuclear Information System (INIS)

Ding Yuzheng; Dai Guiliang

1999-01-01

The HEP related software system is a large one. It comprises mainly detector simulation software, DAQ software and offline system. The author discusses the advantages of OO object oriented methodologies applying to such software system, and the basic strategy for the usage of OO methodologies, languages and tools in the development of the HEP related software are given

DEVELOPMENT OF FRANCHISING IN CROATIA OBSTACLES AND POLICY RECOMMENDATIONS

OpenAIRE

Alpeza, Mirela; Erceg, Aleksandar; Oberman Peterka, Sunčica

2015-01-01

Franchising is very popular growth model but despite the wide application of franchising in the developed countries of the world, its impact on the Croatian economy is still marginal. The purpose of this research is to identify the obstacles and challenges to a wider application of franchising in Croatia and generate policy recommendations for removing the identified obstacles. Obstacles and recommendations are identified on the basis of a conducted longitudinal qualitative research, the firs...

Alberta's transmission development policy : review and recommendations

International Nuclear Information System (INIS)

Stubbings, R.V.

2004-01-01

Alberta's Department of Energy (ADOE) released a policy paper in November 2003 regarding power transmission development for the province. The transmission development policy (TDP) is intended to promote economic growth in Alberta while ensuring consumers with reliable, reasonably priced electricity. This presentation reviewed the main features of the policy and then focused on the allocation of costs to generation customers. The author argued that the proposed changes would result in a sub-optimal development of generation and higher total electricity bills for consumers. He argued that the policy will spare generation customers of any obligation to pay wire-related costs other than local interconnection costs. This would weaken a long-standing ADOE policy which requires generators to pay costs that depend on their location on the transmission system. With the new proposal, generators would not be responsible for ancillary service costs even when they provide direct benefits, and they would pay for system losses on a zonal basis. The author recommended that location charges should be large enough to influence the siting decisions of generators. He also recommended that generators should pay their fare share of transmission use-of-system charges, including ancillary services that provide benefits to generators in the form of a stable, reliable transmission system. 2 tabs., 2 figs

Development of Audit Calculation Methodology for RIA Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Joosuk; Kim, Gwanyoung; Woo, Swengwoong [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-05-15

The interim criteria contain more stringent limits than previous ones. For example, pellet-to-cladding mechanical interaction(PCMI) was introduced as a new failure criteria. And both short-term (e.g. fuel-to coolant interaction, rod burst) and long-term(e.g., fuel rod ballooning, flow blockage) phenomena should be addressed for core coolability assurance. For dose calculations, transient-induced fission gas release has to be accounted additionally. Traditionally, the approved RIA analysis methodologies for licensing application are developed based on conservative approach. But newly introduced safety criteria tend to reduce the margins to the criteria. Thereby, licensees are trying to improve the margins by utilizing a less conservative approach. In this situation, to cope with this trend, a new audit calculation methodology needs to be developed. In this paper, the new methodology, which is currently under developing in KINS, was introduced. For the development of audit calculation methodology of RIA safety analysis based on the realistic evaluation approach, preliminary calculation by utilizing the best estimate code has been done on the initial core of APR1400. Followings are main conclusions. - With the assumption of single full-strength control rod ejection in HZP condition, rod failure due to PCMI is not predicted. - And coolability can be assured in view of entalphy and fuel melting. - But, rod failure due to DNBR is expected, and there is possibility of fuel failure at the rated power conditions also.

Mental Health Smartphone Apps: Review and Evidence-Based Recommendations for Future Developments.

Science.gov (United States)

Bakker, David; Kazantzis, Nikolaos; Rickwood, Debra; Rickard, Nikki

2016-03-01

The number of mental health apps (MHapps) developed and now available to smartphone users has increased in recent years. MHapps and other technology-based solutions have the potential to play an important part in the future of mental health care; however, there is no single guide for the development of evidence-based MHapps. Many currently available MHapps lack features that would greatly improve their functionality, or include features that are not optimized. Furthermore, MHapp developers rarely conduct or publish trial-based experimental validation of their apps. Indeed, a previous systematic review revealed a complete lack of trial-based evidence for many of the hundreds of MHapps available. To guide future MHapp development, a set of clear, practical, evidence-based recommendations is presented for MHapp developers to create better, more rigorous apps. A literature review was conducted, scrutinizing research across diverse fields, including mental health interventions, preventative health, mobile health, and mobile app design. Sixteen recommendations were formulated. Evidence for each recommendation is discussed, and guidance on how these recommendations might be integrated into the overall design of an MHapp is offered. Each recommendation is rated on the basis of the strength of associated evidence. It is important to design an MHapp using a behavioral plan and interactive framework that encourages the user to engage with the app; thus, it may not be possible to incorporate all 16 recommendations into a single MHapp. Randomized controlled trials are required to validate future MHapps and the principles upon which they are designed, and to further investigate the recommendations presented in this review. Effective MHapps are required to help prevent mental health problems and to ease the burden on health systems.

Methodological issues and research recommendations for prognosis after mild traumatic brain injury: results of the International Collaboration on Mild Traumatic Brain Injury Prognosis.

Science.gov (United States)

Kristman, Vicki L; Borg, Jörgen; Godbolt, Alison K; Salmi, L Rachid; Cancelliere, Carol; Carroll, Linda J; Holm, Lena W; Nygren-de Boussard, Catharina; Hartvigsen, Jan; Abara, Uko; Donovan, James; Cassidy, J David

2014-03-01

The International Collaboration on Mild Traumatic Brain Injury (MTBI) Prognosis performed a comprehensive search and critical review of the literature from 2001 to 2012 to update the 2002 best-evidence synthesis conducted by the World Health Organization Collaborating Centre for Neurotrauma, Prevention, Management and Rehabilitation Task Force on the prognosis of MTBI. Of 299 relevant studies, 101 were accepted as scientifically admissible. The methodological quality of the research literature on MTBI prognosis has not improved since the 2002 Task Force report. There are still many methodological concerns and knowledge gaps in the literature. Here we report and make recommendations on how to avoid methodological flaws found in prognostic studies of MTBI. Additionally, we discuss issues of MTBI definition and identify topic areas in need of further research to advance the understanding of prognosis after MTBI. Priority research areas include but are not limited to the use of confirmatory designs, studies of measurement validity, focus on the elderly, attention to litigation/compensation issues, the development of validated clinical prediction rules, the use of MTBI populations other than hospital admissions, continued research on the effects of repeated concussions, longer follow-up times with more measurement periods in longitudinal studies, an assessment of the differences between adults and children, and an account for reverse causality and differential recall bias. Well-conducted studies in these areas will aid our understanding of MTBI prognosis and assist clinicians in educating and treating their patients with MTBI. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Energy Efficiency Indicators Methodology Booklet

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

2010-05-01

This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

Methodology for combining dynamic responses

International Nuclear Information System (INIS)

Cudlin, R.; Hosford, S.; Mattu, R.; Wichman, K.

1978-09-01

The NRC has historically required that the structural/mechanical responses due to various accident loads and loads caused by natural phenomena, (such as earthquakes) be combined when analyzing structures, systems, and components important to safety. Several approaches to account for the potential interaction of loads resulting from accidents and natural phenomena have been used. One approach, the so-called absolute or linear summation (ABS) method, linearly adds the peak structural responses due to the individual dynamic loads. In general, the ABS method has also reflected the staff's conservative preference for the combination of dynamic load responses. A second approach, referred to as SRSS, yields a combined response equal to the square root of the sum of the squares of the peak responses due to the individual dynamic loads. The lack of a physical relationship between some of the loads has raised questions as to the proper methodology to be used in the design of nuclear power plants. An NRR Working Group was constituted to examine load combination methodologies and to develop a recommendation concerning criteria or conditions for their application. Evaluations of and recommendations on the use of the ABS and SRSS methods are provided in the report

The Methodology of Management for Long Term Energy Efficiency Development

International Nuclear Information System (INIS)

Zebergs, V.; Kehris, O.; Savickis, J.; Zeltins, N.

2010-01-01

The paper has shown that the Member States of the European Union (EU) do what they can in order to accelerate the raising of energy efficiency (EE). In each EU Member State investigations are conducted in the planning and management methods with a view to achieve faster and greater EE gains. In Latvia, which imports almost 70% of the total energy resources consumed, saving of each 'toe' is of great importance. Adaptation of the general policy assessment methodology is being studied for planning and management of the EE process. 12 EE management methods have been analysed and recommendations worked out for the introduction of several most topical methods.(author).

A framework for assessing the adequacy and effectiveness of software development methodologies

Science.gov (United States)

Arthur, James D.; Nance, Richard E.

1990-01-01

Tools, techniques, environments, and methodologies dominate the software engineering literature, but relatively little research in the evaluation of methodologies is evident. This work reports an initial attempt to develop a procedural approach to evaluating software development methodologies. Prominent in this approach are: (1) an explication of the role of a methodology in the software development process; (2) the development of a procedure based on linkages among objectives, principles, and attributes; and (3) the establishment of a basis for reduction of the subjective nature of the evaluation through the introduction of properties. An application of the evaluation procedure to two Navy methodologies has provided consistent results that demonstrate the utility and versatility of the evaluation procedure. Current research efforts focus on the continued refinement of the evaluation procedure through the identification and integration of product quality indicators reflective of attribute presence, and the validation of metrics supporting the measure of those indicators. The consequent refinement of the evaluation procedure offers promise of a flexible approach that admits to change as the field of knowledge matures. In conclusion, the procedural approach presented in this paper represents a promising path toward the end goal of objectively evaluating software engineering methodologies.

Assessment of clinical practice guideline methodology for the treatment of knee osteoarthritis with intra-articular hyaluronic acid.

Science.gov (United States)

Altman, Roy D; Schemitsch, Emil; Bedi, Asheesh

2015-10-01

Clinical practice guidelines are of increasing importance in the decision making for the treatment of knee osteoarthritis. Inconsistent recommendations regarding the use of intra-articular hyaluronic acid for the treatment of knee osteoarthritis have led to confusion among treating physicians. Literature search to identify clinical practice guidelines that provide recommendations regarding the use of intra-articular hyaluronic acid treatment for knee osteoarthritis was conducted. Included guidelines were appraised using the AGREE II instrument. Guideline development methodologies, how the results were assessed, the recommendation formation, and work group composition were summarized. Overall, 10 clinical practice guidelines were identified that met our inclusion criteria. AGREE II domain scores were variable across the included guidelines. The methodology utilized across the guidelines was heterogeneous regarding the evidence inclusion criteria, analysis of evidence results, formulation of clinical practice recommendations, and work group composition. The recommendations provided by the guidelines for intra-articular hyaluronic acid treatment for knee osteoarthritis are highly inconsistent as a result of the variability in guideline methodology. Overall, 30% of the included guidelines recommended against the use of intra-articular hyaluronic acid in the treatment of knee osteoarthritis, while 30% deemed the treatment an appropriate intervention under certain scenarios. The remaining 40% of the guidelines provided either an uncertain recommendation or no recommendation at all, based on the high variability in reviewed evidence regarding efficacy and trial quality. There is a need for a standard "appropriate methodology" that is agreed upon for osteoarthritis clinical practice guidelines in order to prevent the development of conflicting recommendations for intra-articular hyaluronic acid treatment for knee osteoarthritis, and to assure that treating physicians who

Low-level radioactive waste from commercial nuclear reactors. Volume 1. Recommendations for technology developments with potential to significantly improve low-level radioactive waste management

International Nuclear Information System (INIS)

Rodgers, B.R.; Jolley, R.L.

1986-02-01

The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 1 provides an executive summary and a general introduction to the four-volume set, in addition to recommendations for research and development (R and D) for low-level radioactive waste (LLRW) treatment. Generic, long-range, and/or high-risk programs identified and prioritized as needed R and D in the LLRW field include: (1) systems analysis to develop decision methodology; (2) alternative processes for dismantling, decontaminating, and decommissioning; (3) ion exchange; (4) incinerator technology; (5) disposal technology; (6) demonstration of advanced technologies; (7) technical assistance; (8) below regulatory concern materials; (9) mechanical treatment techniques; (10) monitoring and analysis procedures; (11) radical process improvements; (12) physical, chemical, thermal, and biological processes; (13) fundamental chemistry; (14) interim storage; (15) modeling; and (16) information transfer. The several areas are discussed in detail

Amniotic fluid embolism incidence, risk factors and outcomes: a review and recommendations

Directory of Open Access Journals (Sweden)

Knight Marian

2012-02-01

Full Text Available Abstract Background Amniotic fluid embolism (AFE is a rare but severe complication of pregnancy. A recent systematic review highlighted apparent differences in the incidence, with studies estimating the incidence of AFE to be more than three times higher in North America than Europe. The aim of this study was to examine population-based regional or national data from five high-resource countries in order to investigate incidence, risk factors and outcomes of AFE and to investigate whether any variation identified could be ascribed to methodological differences between the studies. Methods We reviewed available data sources on the incidence of AFE in Australia, Canada, the Netherlands, the United Kingdom and the USA. Where information was available, the risk factors and outcomes of AFE were examined. Results The reported incidence of AFE ranged from 1.9 cases per 100 000 maternities (UK to 6.1 per 100 000 maternities (Australia. There was a clear distinction between rates estimated using different methodologies. The lowest estimated incidence rates were obtained through validated case identification (range 1.9-2.5 cases per 100 000 maternities; rates obtained from retrospective analysis of population discharge databases were significantly higher (range 5.5-6.1 per 100 000 admissions with delivery diagnosis. Older maternal age and induction of labour were consistently associated with AFE. Conclusions Recommendation 1: Comparisons of AFE incidence estimates should be restricted to studies using similar methodology. The recommended approaches would be either population-based database studies using additional criteria to exclude false positive cases, or tailored data collection using existing specific population-based systems. Recommendation 2: Comparisons of AFE incidence between and within countries would be facilitated by development of an agreed case definition and an agreed set of criteria to minimise inclusion of false positive cases for

APPLICATION OF METHODOLOGY OF STRATEGIC PLANNING IN DEVELOPING NATIONAL PROGRAMMES ON DEVELOPMENT

Directory of Open Access Journals (Sweden)

Inna NOVAK

2015-07-01

Full Text Available Actuality: The main purpose of strategic planning is that long-term interests of sustainable development of a market economy require the use of effective measures of state regulation of economic and social processes. Objective: The aim of the article is determined to analyze the development of strategic planning methodology and practical experience of its application in the design of national development programs. Methods: When writing the article the following research methods were used: analysis and synthesis, target-oriented and monographic. Results: In Ukraine at the level of state and local government authorities strategies of development of branches, regions, cities, etc. are being developed but given the lack of state funding a unified investment strategy of the country is not developed. After analyzing development of the strategic planning methodology and examples of its application in the design of state development programs we identified the need to develop an investment strategy of the state (sectors, regions, etc., as due to defined directions and guidelines of the activity it will increase the investment level in the country and ensure national strategy “Ukraine-2020”.

Energy indicators for sustainable development: Guidelines and methodologies

International Nuclear Information System (INIS)

2005-04-01

This publication is the product of an international initiative to define a set of Energy Indicators for Sustainable Development (EISD) and corresponding methodologies and guidelines. The successful completion of this work is the result of an intensive effort led by the International Atomic Energy Agency (IAEA) in cooperation with the United Nations Department of Economic and Social Affairs (UNDESA), the International Energy Agency (IEA), Eurostat and the European Environment Agency (EEA). The thematic framework, guidelines, methodology sheets and energy indicators set out in this publication reflect the expertise of these various agencies, recognized worldwide as leaders in energy and environmental statistics and analysis. While each agency has an active indicator programme, one goal of this joint endeavour has been to provide users with a consensus by leading experts on definitions, guidelines and methodologies for the development and worldwide use of a single set of energy indicators. No set of energy indicators can be final and definitive. To be useful, indicators must evolve over time to fit country-specific conditions, priorities and capabilities. The purpose of this publication is to present one set of EISD for consideration and use, particularly at the national level, and to serve as a starting point in the development of a more comprehensive and universally accepted set of energy indicators relevant to sustainable development. It is hoped that countries will use the EISD to assess their energy systems and to track their progress towards nationally defined sustainable development goals and objectives. It is also hoped that users of the information presented in this publication will contribute to refinements of energy indicators for sustainable development by adding their own unique perspectives to what is presented herein

Energy indicators for sustainable development: Guidelines and methodologies

International Nuclear Information System (INIS)

2008-01-01

This publication is the product of an international initiative to define a set of Energy Indicators for Sustainable Development (EISD) and corresponding methodologies and guidelines. The successful completion of this work is the result of an intensive effort led by the International Atomic Energy Agency (IAEA) in cooperation with the United Nations Department of Economic and Social Affairs (UNDESA), the International Energy Agency (IEA), Eurostat and the European Environment Agency (EEA). The thematic framework, guidelines, methodology sheets and energy indicators set out in this publication reflect the expertise of these various agencies, recognized worldwide as leaders in energy and environmental statistics and analysis. While each agency has an active indicator programme, one goal of this joint endeavour has been to provide users with a consensus by leading experts on definitions, guidelines and methodologies for the development and worldwide use of a single set of energy indicators. No set of energy indicators can be final and definitive. To be useful, indicators must evolve over time to fit country-specific conditions, priorities and capabilities. The purpose of this publication is to present one set of EISD for consideration and use, particularly at the national level, and to serve as a starting point in the development of a more comprehensive and universally accepted set of energy indicators relevant to sustainable development. It is hoped that countries will use the EISD to assess their energy systems and to track their progress towards nationally defined sustainable development goals and objectives. It is also hoped that users of the information presented in this publication will contribute to refinements of energy indicators for sustainable development by adding their own unique perspectives to what is presented herein

Review of PRA methodology for LMFBR

International Nuclear Information System (INIS)

Yang, J. E.

1999-02-01

Probabilistic Risk Assessment (PRA) has been widely used as a tool to evaluate the safety of NPPs (Nuclear Power Plants), which are in the design stage as well as in operation. Recently, PRA becomes one of the licensing requirements for many existing and new NPPs. KALIMER is a Liquid Metal Fast Breeder Reactor (LMFBR) being developed by KAERI. Since the design concept of KALIMER is similar to that of the PRISM plant developed by GE, it would be appropriate to review the PRA methodology of PRISM as the first step of KALIMER PRA. Hence, in this report summarizes the PRA methodology of PRISM plant, and the required works for the PSA of KALIMER based on the reviewed results. The PRA technology of PRISM plant consists of following five major tasks: (1) development of initiating event list, (2) development of system event tree, (3) development of core response event tree, (4) development of containment response event tree, and (5) consequences and risk estimation. The estimated individual and societal risk measures show that the risk from a PRISM module is substantially less than the NRC goal. Each task is compared to the PRA methodology of Light Water Reactor (LWR)/Pressurized Heavy Water Reactor (PHWR). In the report, each task of PRISM PRA methodology is reviewed and compared to the corresponding part of LWR/PHWR PSA performed in Korea. The parts that are not modeled appropriately in PRISM PRA are identified, and the recommendations for KALIMER PRA are stated. (author). 14 refs., 9 tabs., 4 figs

Contemporaneous International Asthma Guidelines Present Differing Recommendations: An Analysis

Directory of Open Access Journals (Sweden)

Samir Gupta

2016-01-01

Full Text Available Background. Several international groups develop asthma guidelines. Conflicting recommendations across guidelines have been described in several disease areas and may contribute to practice variability. Accordingly, we compared the latest Canadian Thoracic Society (CTS asthma guideline with contemporaneous international asthma guidelines to evaluate conflicting recommendations and their causes. Methods. We identified the latest CTS asthma guideline update (2012 and the following societies which also updated their guidelines in 2012: the British Thoracic Society and Scottish Intercollegiate Guidelines Network and the Global Initiative for Asthma. We compared these three guidelines on (1 key methodological factors and (2 adult pharmacotherapy recommendations. Results. Methods used and documentation provided for literature search strategy and dates, evidence synthesis, outcomes considered, evidence appraisal, and recommendation formulation varied between guidelines. Criteria used to define suboptimal asthma control varied widely between guidelines. Inhaled corticosteroid dosing recommendations diverged, as did recommendations surrounding use of budesonide/formoterol as a reliever and controller and recommendations in the subsequent step. Conclusions. There are important differences between recommendations provided in contemporaneous asthma guidelines. Causes include differences in methods used for interpreting evidence and formulating recommendations. Adopting a common set of valid and explicit methods across international societies could harmonize recommendations and facilitate guideline implementation.

Development Methodology for an Integrated Legal Cadastre

NARCIS (Netherlands)

Hespanha, J.P.

2012-01-01

This Thesis describes the research process followed in order to achieve a development methodology applicable to the reform of cadastral systems with a legal basis. It was motivated by the author’s participation in one of the first surveying and mapping operations for a digital cadastre in Portugal,

PROSPECT: a practical method for formulating evidence-based expert recommendations for the management of postoperative pain.

Science.gov (United States)

Neugebauer, E A M; Wilkinson, R C; Kehlet, H; Schug, S A

2007-07-01

Many patients still suffer severe acute pain in the postoperative period. Although guidelines for treating acute pain are widely published and promoted, most do not consider procedure-specific differences in pain experienced or in techniques that may be most effective and appropriate for different surgical settings. The procedure-specific postoperative pain management (PROSPECT) Working Group provides procedure-specific recommendations for postoperative pain management together with supporting evidence from systematic literature reviews and related procedures at http://www.postoppain.org The methodology for PROSPECT reviews was developed and refined by discussion of the Working Group, and it adapts existing methods for formulation of consensus recommendations to the specific requirements of PROSPECT. To formulate PROSPECT recommendations, we use a methodology that takes into account study quality and source and level of evidence, and we use recognized methods for achieving group consensus, thus reducing potential bias. The new methodology is first applied in full for the 2006 update of the PROSPECT review of postoperative pain management for laparoscopic cholecystectomy. Transparency in PROSPECT processes allows the users to be fully aware of any limitations of the evidence and recommendations, thereby allowing for appropriate decisions in their own practice setting.

The development of a safety analysis methodology for the optimized power reactor 1000

International Nuclear Information System (INIS)

Hwang-Yong, Jun; Yo-Han, Kim

2005-01-01

Korea Electric Power Research Institute (KEPRI) has been developing inhouse safety analysis methodology based on the delicate codes available to KEPRI to overcome the problems arising from currently used vendor oriented methodologies. For the Loss of Coolant Accident (LOCA) analysis, the KREM (KEPRI Realistic Evaluation Methodology) has been developed based on the RELAP-5 code. The methodology was approved for the Westinghouse 3-loop plants by the Korean regulatory organization and the project to extent the methodology to the Optimized Power Reactor 1000 (OPR1000) has been ongoing since 2001. Also, for the Non-LOCA analysis, the KNAP (Korea Non-LOCA Analysis Package) has been developed using the UNICORN-TM code system. To demonstrate the feasibility of these codes systems and methodologies, some typical cases of the design basis accidents mentioned in the final safety analysis report (FSAR) were analyzed. (author)

Methodology for Developing a Diesel Exhaust After Treatment Simulation Tool

DEFF Research Database (Denmark)

Christiansen, Tine; Jensen, Johanne; Åberg, Andreas

2018-01-01

A methodology for the development of catalyst models is presented. Also, a methodology of the implementation of such models into a modular simulation tool, which simulates the units in succession, is presented. A case study is presented illustrating how suitable models can be found and used for s...

Development of seismic PSA methodology at JAERI

International Nuclear Information System (INIS)

Muramatsu, K.; Ebisawa, K.; Matsumoto, K.; Oikawa, T.; Kondo, M.

1995-01-01

The Japan Atomic Energy Research Institute (JAERI) is developing a methodology for seismic probabilistic safety assessment (PSA) of nuclear power plants, aiming at providing a set of procedures, computer codes and data suitable for performing seismic PSA in Japan. In order to demonstrate the usefulness of JAERI's methodology and to obtain better understanding on the controlling factors of the results of seismic PSAs, a seismic PSA for a BWR is in progress. In the course of this PSA, various improvements were made on the methodology. In the area of the hazard analysis, the application of the current method to the model plant site is being carried out. In the area of response analysis, the response factor method was modified to consider the non-linear response effect of the building. As for the capacity evaluation of components, since capacity data for PSA in Japan are very scarce, capacities of selected components used in Japan were evaluated. In the systems analysis, the improvement of the SECOM2 code was made to perform importance analysis and sensitivity analysis for the effect of correlation of responses and correlation of capacities. This paper summarizes the recent progress of the seismic PSA research at JAERI with emphasis on the evaluation of component capacity and the methodology improvement of systems reliability analysis. (author)

When Patients Write the Guidelines: Patient Panel Recommendations for the Treatment of Rheumatoid Arthritis.

Science.gov (United States)

Fraenkel, Liana; Miller, Amy S; Clayton, Kelly; Crow-Hercher, Rachelle; Hazel, Shantana; Johnson, Britt; Rott, Leslie; White, Whitney; Wiedmeyer, Carole; Montori, Victor M; Singh, Jasvinder A; Nowell, W Benjamin

2016-01-01

How best to involve patients in the development of clinical practice guideline (CPG) recommendations is not known. We sought to determine the feasibility and value of developing CPG recommendations based on a voting panel composed entirely of patients, with the ultimate goal of comparing the patients' recommendations to ones developed by a physician-dominated voting panel on the same clinical questions. Ten patients with rheumatoid arthritis completed 8 hours of training on evidence-based medicine and guideline development. They constituted a voting panel and, with 2 American College of Rheumatology staff with expertise in CPG development and a physician facilitator, subsequently met at a face-to-face meeting to develop recommendations. They applied the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) methodology to formulate recommendations on 18 questions for which there was evidence warranting moderate or high confidence. The patient panel developed recommendations for 16 of the 18 questions; for the other 2, the panel thought there were insufficient data to support a recommendation. For 13 of the 16 questions, the patient panel recommended the same course of action as did the physician-dominated panel. Differences were due to how the 2 panels valued the balance between benefits and harms. Patient and physician-dominated panels developed the same recommendations for most questions for which there was evidence warranting moderate to high confidence. Additional experiences are necessary to advance the evidence necessary to determine what panel composition is optimal to produce the best guidelines. © 2015, American College of Rheumatology.

Evaluation of HIV testing recommendations in specialty guidelines for the management of HIV indicator conditions

DEFF Research Database (Denmark)

Lord, E; Stockdale, A J; Malek, R

2017-01-01

OBJECTIVES: European guidelines recommend HIV testing for individuals presenting with indicator conditions (ICs) including AIDS-defining conditions (ADCs). The extent to which non-HIV specialty guidelines recommend HIV testing in ICs and ADCs is unknown. Our aim was to pilot a methodology in the UK...... are piloting methods to engage with guideline development groups to ensure that patients diagnosed with ICs/ADCs are tested for HIV. We then plan to apply our methodology in other European settings as part of the Optimising Testing and Linkage to Care for HIV across Europe (OptTEST) project....... to review specialty guidelines and ascertain if HIV was discussed and testing recommended. METHODS: UK and European HIV testing guidelines were reviewed to produce a list of 25 ADCs and 49 ICs. UK guidelines for these conditions were identified from searches of the websites of specialist societies...

Development of risk assessment methodology against natural external hazards for sodium-cooled fast reactors: project overview and strong Wind PRA methodology - 15031

International Nuclear Information System (INIS)

Yamano, H.; Nishino, H.; Kurisaka, K.; Okano, Y.; Sakai, T.; Yamamoto, T.; Ishizuka, Y.; Geshi, N.; Furukawa, R.; Nanayama, F.; Takata, T.; Azuma, E.

2015-01-01

This paper describes mainly strong wind probabilistic risk assessment (PRA) methodology development in addition to the project overview. In this project, to date, the PRA methodologies against snow, tornado and strong wind were developed as well as the hazard evaluation methodologies. For the volcanic eruption hazard, ash fallout simulation was carried out to contribute to the development of the hazard evaluation methodology. For the forest fire hazard, the concept of the hazard evaluation methodology was developed based on fire simulation. Event sequence assessment methodology was also developed based on plant dynamics analysis coupled with continuous Markov chain Monte Carlo method in order to apply to the event sequence against snow. In developing the strong wind PRA methodology, hazard curves were estimated by using Weibull and Gumbel distributions based on weather data recorded in Japan. The obtained hazard curves were divided into five discrete categories for event tree quantification. Next, failure probabilities for decay heat removal related components were calculated as a product of two probabilities: i.e., a probability for the missiles to enter the intake or out-take in the decay heat removal system, and fragility caused by the missile impacts. Finally, based on the event tree, the core damage frequency was estimated about 6*10 -9 /year by multiplying the discrete hazard probabilities in the Gumbel distribution by the conditional decay heat removal failure probabilities. A dominant sequence was led by the assumption that the operators could not extinguish fuel tank fire caused by the missile impacts and the fire induced loss of the decay heat removal system. (authors)

DEVELOPMENT OF FRANCHISING IN CROATIA OBSTACLES AND POLICY RECOMMENDATIONS

Directory of Open Access Journals (Sweden)

Mirela Alpeza

2015-11-01

Full Text Available Franchising is very popular growth model but despite the wide application of franchising in the developed countries of the world, its impact on the Croatian economy is still marginal. The purpose of this research is to identify the obstacles and challenges to a wider application of franchising in Croatia and generate policy recommendations for removing the identified obstacles. Obstacles and recommendations are identified on the basis of a conducted longitudinal qualitative research, the first phase of which was conducted in 2006, and second in 2014. The overall results of this research were presented in a form of PEST analysis and compared with the results of the 2006 research aiming to detect changes (improvements/ deterioration in individual areas of the research political, economic, legal and technologic factors of influence on the development of franchising in Croatia. Based on the detected changes, conclusions and policy recommendations were identified.The obstacles can be divided in two categories: franchising specific barriers and general business related obstacles for doing business in Croatia. Without removing most of these obstacles, it is unrealistic to expect high growth of franchising activities in Croatia in near future.

Surgery for constipation: systematic review and practice recommendations: Graded practice and future research recommendations.

Science.gov (United States)

Knowles, C H; Grossi, U; Horrocks, E J; Pares, D; Vollebregt, P F; Chapman, M; Brown, S; Mercer-Jones, M; Williams, A B; Yiannakou, Y; Hooper, R J; Stevens, N; Mason, J

2017-09-01

This manuscript forms the final of seven that address the surgical management of chronic constipation (CC) in adults. The content coalesces results from the five systematic reviews that precede it and of the European Consensus process to derive graded practice recommendations (GPR). Summary of review data, development of GPR and future research recommendations as outlined in detail in the 'introduction and methods' paper. The overall quality of data in the five reviews was poor with 113/156(72.4%) of included studies providing only level IV evidence and only four included level I RCTs. Coalescence of data from the five procedural classes revealed that few firm conclusions could be drawn regarding procedural choice or patient selection: no single procedure dominated in addressing dynamic structural abnormalities of the anorectum and pelvic floor with each having similar overall efficacy. Of one hundred 'prototype' GPRs developed by the clinical guideline group, 85/100 were deemed 'appropriate' based on the independent scoring of a panel of 18 European experts and use of RAND-UCLA consensus methodology. The remaining 15 were all deemed uncertain. Future research recommendations included some potential RCTs but also a strong emphasis on delivery of large multinational high-quality prospective cohort studies. While the evidence base for surgery in CC is poor, the widespread European consensus for GPRs is encouraging. Professional bodies have the opportunity to build on this work by supporting the efforts of their membership to help convert the documented recommendations into clinical guidelines. © 2017 The Authors. Colorectal Disease published by John Wiley & Sons Ltd on behalf of Association of Coloproctology of Great Britain and Ireland.

Methodology for development of risk indicators for offshore platforms

International Nuclear Information System (INIS)

Oeien, K.; Sklet, S.

1999-01-01

This paper presents a generic methodology for development of risk indicators for petroleum installations and a specific set of risk indicators established for one offshore platform. The risk indicators should be used to control the risk during operation of platforms. The methodology is purely risk-based and the basis for development of risk indicators is the platform specific quantitative risk analysis (QRA). In order to identify high risk contributing factors, platform personnel are asked to assess whether and how much the risk influencing factors will change. A brief comparison of probabilistic safety assessment (PSA) for nuclear power plants and quantitative risk analysis (QRA) for petroleum platforms is also given. (au)

Operational intervention levels for reactor emergencies IAEA recommendations

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Laís A. de; Reis, Arlene A. dos; Santos, Raul dos, E-mail: laguiar@ird.gov.br, E-mail: arlene@ird.gov.br, E-mail: raul@ird.gov.br [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-07-01

The IAEA publication EPR-NPP-OILs-2017, Operational Intervention Levels for Reactor Emergences and Methodology for their Derivation, provides selected default OIL values, describing a methodology for their derivation, as well as practical tools and recommendations for their use. IAEA recommends that tools and default OIL values be directly integrated into national emergency arrangements or reviewed and modified as necessary to meet the specific emergency preparedness and response arrangements. The Institute of Radiation Protection and Dosimetry (IRD) has a Radiological Assessment TEAM (EAR) as pare of its Radiation Emergency Response System. Brazilian regulatory standards address actions for radiation emergencies encompassing necessary measures to assess public exposures, intervention levels to protect the public and recommendations for protective actions as, evacuation, relocation, sheltering and food restrictions. The objective of this paper is to present a discussion the use these OILs, to compare those ones established by the Brazilian standards and to propose a methodology on how OILs can be used by EAR/IRD in case of an emergency at the Brazilian NPP. (author)

Operational intervention levels for reactor emergencies IAEA recommendations

International Nuclear Information System (INIS)

Aguiar, Laís A. de; Reis, Arlene A. dos; Santos, Raul dos

2017-01-01

The IAEA publication EPR-NPP-OILs-2017, Operational Intervention Levels for Reactor Emergences and Methodology for their Derivation, provides selected default OIL values, describing a methodology for their derivation, as well as practical tools and recommendations for their use. IAEA recommends that tools and default OIL values be directly integrated into national emergency arrangements or reviewed and modified as necessary to meet the specific emergency preparedness and response arrangements. The Institute of Radiation Protection and Dosimetry (IRD) has a Radiological Assessment TEAM (EAR) as pare of its Radiation Emergency Response System. Brazilian regulatory standards address actions for radiation emergencies encompassing necessary measures to assess public exposures, intervention levels to protect the public and recommendations for protective actions as, evacuation, relocation, sheltering and food restrictions. The objective of this paper is to present a discussion the use these OILs, to compare those ones established by the Brazilian standards and to propose a methodology on how OILs can be used by EAR/IRD in case of an emergency at the Brazilian NPP. (author)

Cernavoda NPP risk - Based test and maintenance planning - Methodology development

International Nuclear Information System (INIS)

Georgescu, G.; Popa, P.; Petrescu, A.; Naum, M.; Gutu, M.

1997-01-01

The Cernavoda Power Plant starts the commercial operation in November 1996. During operation of the nuclear power plant, several mandatory tests and maintenance are performed on stand-by safety system components to ensure their availability in case of accident. The basic purpose of such activities is the early detection of any failure and degradation, and timely correction of deteriorations. Because of the large number of such activities, emphasis on plant safety and allocation of resources becomes difficult. The probabilistic model and methodology can be effectively used to obtain the risk significance of these activities so that the resources are directed to the most important areas. The proposed Research Contract activity is strongly connected with other safety related areas under development. Since, the Cernavoda Probabilistic Safety Evaluation Level 1 PSA Study (CPSE) was performed and now the study is revised taking into account the as-built information, it is recommended to implement into the model the necessary modeling features to support further PSA application, especially related to Test and Maintenance optimization. Methods need to be developed in order to apply the PSA model including risk information together with other needed information for Test and Maintenance optimization. Also, in parallel with the CPSE study updating, the software interface for the PSA model is under development (Risk Monitor Software class), methods and models needing to be developed for the purpose of using it for qualified monitoring of Test and Maintenance Strategy efficiency. Similar, the Data Collection System need to be appropriate for the purpose of an ongoing implementation of a risk - based Test and Maintenance Strategy. (author). 4 refs, 1 fig

Volatility in the California power market: source, methodology and recommendations

International Nuclear Information System (INIS)

Dahlgren, R.W.; Liu, C.-C.; Lawarree, J.

2001-01-01

Extreme short-term price volatility in competitive electricity markets creates the need for price risk management for electric utilities. Recent methods in California provide examples of lessons that can be applied to other markets worldwide. Value-at-Risk (VAR), a method for quantifying risk exposure in the financial industry, is introduced as a technique that is applicable to quantifying price risk exposure in power systems. The methodology for applying VAR using changes in prices from corresponding hours on previous periods to understand how the hourly VAR entity is exposed when the power system is obligated to serve a load and does not have a contract for supply. The VAR methodology introduced is then applied to a sample company in California that is serving a 100 MW load. Proposed remedies for the problems observed in the competitive California electric power industry are introduced. (Author)

Youth injury prevention in Canada: use of the Delphi method to develop recommendations.

Science.gov (United States)

Pike, Ian; Piedt, Shannon; Davison, Colleen M; Russell, Kelly; Macpherson, Alison K; Pickett, William

2015-12-22

The Health Behaviour in School-aged Children Survey is one of very few cross-national health surveys that includes information on injury occurrence and prevention within adolescent populations. A collaboration to develop a Canadian youth injury report using these data resulted in, Injury among Young Canadians: A national study of contextual determinants. The objective of this study was to develop specific evidence-based, policy-oriented recommendations arising from the national report, using a modified-Delphi process with a panel of expert stakeholders. Eight injury prevention experts and a 3-person youth advisory team associated with a Canadian injury prevention organization (Parachute Canada) reviewed, edited and commented on report recommendations through a three-stage iterative modified-Delphi process. From an initial list of 27 draft recommendations, the modified-Delphi process resulted in a final list of 19 specific recommendations, worded to resonate with the group(s) responsible to lead or take the recommended action. Two recommendations were rated as "extremely important" or "very important" by 100 % of the expert panel, two were deleted, a further two recommendations were deleted but the content included as text in the report, and four were merged with other existing recommendations. The modified-Delphi process was an appropriate method to achieve agreement on 19 specific evidence-based, policy-oriented recommendations to complement the national youth injury report. In providing their input, it is noted that the injury stakeholders each acted as individual experts, unattached to any organizational position or policy. These recommendations will require multidisciplinary collaborations in order to support the proposed policy development, additional research, programming and clear decision-making for youth injury prevention.

Non-economic determinants of economic development: methodology and influence

OpenAIRE

Barashov, N.

2011-01-01

The paper deals with research methodology of non-economic determinants of economic development. The author considers various theoretical approaches to definition of economic growth factors. Considerable attention is given to studying possible influence of non-economic determinants on quality of economic development.

Application of low-cost methodologies for mobile phone app development.

Science.gov (United States)

Zhang, Melvyn; Cheow, Enquan; Ho, Cyrus Sh; Ng, Beng Yeong; Ho, Roger; Cheok, Christopher Cheng Soon

2014-12-09

The usage of mobile phones and mobile phone apps in the recent decade has indeed become more prevalent. Previous research has highlighted a method of using just the Internet browser and a text editor to create an app, but this does not eliminate the challenges faced by clinicians. More recently, two methodologies of app development have been shared, but there has not been any disclosures pertaining to the costs involved. In addition, limitations such as the distribution and dissemination of the apps have not been addressed. The aims of this research article are to: (1) highlight a low-cost methodology that clinicians without technical knowledge could use to develop educational apps; (2) clarify the respective costs involved in the process of development; (3) illustrate how limitations pertaining to dissemination could be addressed; and (4) to report initial utilization data of the apps and to share initial users' self-rated perception of the apps. In this study, we will present two techniques of how to create a mobile app using two of the well-established online mobile app building websites. The costs of development are specified and the methodology of dissemination of the apps will be shared. The application of the low-cost methodologies in the creation of the "Mastering Psychiatry" app for undergraduates and "Déjà vu" app for postgraduates will be discussed. A questionnaire survey has been administered to undergraduate students collating their perceptions towards the app. For the Mastering Psychiatry app, a cumulative total of 722 users have used the mobile app since inception, based on our analytics. For the Déjà vu app, there has been a cumulative total of 154 downloads since inception. The utilization data demonstrated the receptiveness towards these apps, and this is reinforced by the positive perceptions undergraduate students (n=185) had towards the low-cost self-developed apps. This is one of the few studies that have demonstrated the low

Developing Agent-Oriented Video Surveillance System through Agent-Oriented Methodology (AOM

Directory of Open Access Journals (Sweden)

Cheah Wai Shiang

2016-12-01

Full Text Available Agent-oriented methodology (AOM is a comprehensive and unified agent methodology for agent-oriented software development. Although AOM is claimed to be able to cope with a complex system development, it is still not yet determined up to what extent this may be true. Therefore, it is vital to conduct an investigation to validate this methodology. This paper presents the adoption of AOM in developing an agent-oriented video surveillance system (VSS. An intruder handling scenario is designed and implemented through AOM. AOM provides an alternative method to engineer a distributed security system in a systematic manner. It presents the security system at a holistic view; provides a better conceptualization of agent-oriented security system and supports rapid prototyping as well as simulation of video surveillance system.

Heat stress intervention research in construction: gaps and recommendations.

Science.gov (United States)

Yang, Yang; Chan, Albert Ping-Chuen

2017-06-08

Developing heat stress interventions for construction workers has received mounting concerns in recent years. However, limited efforts have been exerted to elaborate the rationale, methodology, and practicality of heat stress intervention in the construction industry. This study aims to review previous heat stress intervention research in construction, to identify the major research gaps in methodological issues, and to offer detailed recommendations for future studies. A total of 35 peer-reviewed journal papers have been identified to develop administrative, environmental or personal engineering interventions to safeguard construction workers. It was found that methodological limitations, such as arbitrary sampling methods and unreliable instruments, could be the major obstacle in undertaking heat stress intervention research. To bridge the identified research gaps, this study then refined a research framework for conducting heat stress intervention studies in the construction industry. The proposed research strategy provides researchers and practitioners with fresh insights into expanding multidisciplinary research areas and solving practical problems in the management of heat stress. The proposed research framework may foster the development of heat stress intervention research in construction, which further aids researchers, practitioners, and policymakers in formulating proper intervention strategies.

Towards an MDA-based development methodology for distributed applications

NARCIS (Netherlands)

van Sinderen, Marten J.; Gavras, A.; Belaunde, M.; Ferreira Pires, Luis; Andrade Almeida, João

2004-01-01

This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

The Development and Significance of Standards for Smoking-Machine Methodology

Directory of Open Access Journals (Sweden)

Baker R

2014-12-01

Full Text Available Bialous and Yach have recently published an article in Tobacco Control in which they claim that all smoking-machine standards stem from a method developed unilaterally by the tobacco industry within the Cooperation Centre for Scientific Research Relative to Tobacco (CORESTA. Using a few highly selective quotations from internal tobacco company memos, they allege, inter alia, that the tobacco industry has changed the method to suit its own needs, that because humans do not smoke like machines the standards are of little value, and that the tobacco industry has unjustifiably made health claims about low “tar” cigarettes. The objectives of this paper are to review the development of smoking-machine methodology and standards, involvement of relative parties, outline the significance of the results and explore the validity of Bialous and Yach's claims. The large volume of published scientific information on the subject together with other information in the public domain has been consulted. When this information is taken into account it becomes obvious that the very narrow and restricted literature base of Bialous and Yach's analysis has resulted in them, perhaps inadvertedly, making factual errors, drawing wrong conclusions and writing inaccurate statements on many aspects of the subject. The first smoking-machine standard was specified by the Federal Trade Commission (FTC, a federal government agency in the USA, in 1966. The CORESTA Recommended Method, similar in many aspects to that of the FTC, was developed in the late 1960s and published in 1969. Small differences in the butt lengths, smoke collection and analytical procedures in methods used in various countries including Germany, Canada and the UK, developed later, resulted in about a 10% difference in smoke “tar” yields. These differences in methodology were harmonised in a common International Organisation for Standardisation (ISO Standard Method in 1991, after a considerable amount

Breeders’ work after cultivar development - the stage of recommendation

Directory of Open Access Journals (Sweden)

Luiz Carlos Federizzi

2012-12-01

Full Text Available The development of new cultivars is the ultimate goal of breeding programs and is the result of many years of hard work and dedication of breeders and their teams. An important part of the process, often neglected by geneticists, is the stage from recommendation to the production of breeder seed (post-breeding. This paper discusses the role of the breeder in the recommendation, registration, protection and marketing of new cultivars. The breeder’s active participation in all phases of post-breeding is fundamental to ensure that the cultivar reaches farmers quickly and can provide the benefits expected by society

Study for a simplified LCA methodology adapted to bio-products. Final report

International Nuclear Information System (INIS)

2009-01-01

Agricultural resources form a renewable stock of raw materials that can be used for various purposes: food supply, production of energy (including biofuels), bio-products and bio-based construction materials. The use of agricultural resources to produce bio-products is expanding in France and throughout the world, partly due to the presumed advantages of these products towards the environment. In this context, ADEME (the French Environment and Energy Management Agency) commissioned a study for the development of a methodological framework to evaluate the environmental impacts of bio-products. This study was also in charge of the identification of areas of improvement for the 'Bilan Produit', an environmental assessment tool developed by ADEME, in order to allow a future integration of bio-products. The first step of this study consisted of a comparative review of the existing bio-products' LCA (Life Cycle Assessment). This review underlined a deep heterogeneity among the methodologies used, as well as a lack of transparency in the results displayed. In a second step of the project, all the methodological issues in the evaluation of bio-products were studied, and recommendations for the resolution of each one of them have been proposed. These critical analyses are presented in individual fact-sheets, which detail the specific issues of each question, facts from the bibliographic review, the results of the tests conducted on three bio-products, and finally the methodological recommendations to answer the question. This project showed that some methodological recommendations had to be specified depending on the objective of the LCA: eco-design, environmental labeling or comparative LCA. The work conducted also identified some necessary improvements to the Bilan Produit tool, which come under four categories: addition of the missing inventories, integration of metadata regarding the inventories, consideration for the specific end-of-life scenarios of bio-products, and

How to conduct a qualitative meta-analysis: Tailoring methods to enhance methodological integrity.

Science.gov (United States)

Levitt, Heidi M

2018-05-01

Although qualitative research has long been of interest in the field of psychology, meta-analyses of qualitative literatures (sometimes called meta-syntheses) are still quite rare. Like quantitative meta-analyses, these methods function to aggregate findings and identify patterns across primary studies, but their aims, procedures, and methodological considerations may vary. This paper explains the function of qualitative meta-analyses and their methodological development. Recommendations have broad relevance but are framed with an eye toward their use in psychotherapy research. Rather than arguing for the adoption of any single meta-method, this paper advocates for considering how procedures can best be selected and adapted to enhance a meta-study's methodological integrity. Through the paper, recommendations are provided to help researchers identify procedures that can best serve their studies' specific goals. Meta-analysts are encouraged to consider the methodological integrity of their studies in relation to central research processes, including identifying a set of primary research studies, transforming primary findings into initial units of data for a meta-analysis, developing categories or themes, and communicating findings. The paper provides guidance for researchers who desire to tailor meta-analytic methods to meet their particular goals while enhancing the rigor of their research.

International conference on research methodology for roadside surveys of drinking-driving : alcohol countermeasures workshop

Science.gov (United States)

1974-09-01

The basic purpose [of the conference] was to encourage more roadside surveys by furthering the research methodology and recommendations for conducting roadside surveys developed by a special group of the Organization for Economic Cooperation and Deve...

Prometheus Reactor I&C Software Development Methodology, for Action

Energy Technology Data Exchange (ETDEWEB)

T. Hamilton

2005-07-30

The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

Methodological developments and applications of neutron activation analysis

International Nuclear Information System (INIS)

Kucera, J.

2007-01-01

The paper reviews the author's experience acquired and achievements made in methodological developments of neutron activation analysis (NAA) of mostly biological materials. These involve epithermal neutron activation analysis, radiochemical neutron activation analysis using both single- and multi-element separation procedures, use of various counting modes, and the development and use of the self-verification principle. The role of NAA in the detection of analytical errors is discussed and examples of applications of the procedures developed are given. (author)

Methodological Grounds of Managing Innovation Development of Restaurants

OpenAIRE

Naidiuk V. S.

2013-01-01

The goal of the article lies in identification and further development of methodological grounds of managing the innovation development of restaurants. Based on the data of the critical analysis of existing scientific views on interpretation of the essence of the "managing innovation development of an enterprise" notion, the article conducts clarification of this definition. In the result of the study the article builds up a cause-effect diagram of solution of the problem of ensuring efficien...

Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

Directory of Open Access Journals (Sweden)

Jamie J Kirkham

2017-11-01

Full Text Available The use of core outcome sets (COS ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR].An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers, and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process.The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using

Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

Science.gov (United States)

Kirkham, Jamie J; Davis, Katherine; Altman, Douglas G; Blazeby, Jane M; Clarke, Mike; Tunis, Sean; Williamson, Paula R

2017-11-01

The use of core outcome sets (COS) ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD) project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR]). An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers), and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process. The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using reasonable

Ada training evaluation and recommendations from the Gamma Ray Observatory Ada Development Team

International Nuclear Information System (INIS)

1985-10-01

The Ada training experiences of the Gamma Ray Observatory Ada development team are related, and recommendations are made concerning future Ada training for software developers. Training methods are evaluated, deficiencies in the training program are noted, and a recommended approach, including course outline, time allocation, and reference materials, is offered

DEVELOPMENT OF A GENERIC RECOMMENDER SYSTEM

Directory of Open Access Journals (Sweden)

Dan Munteanu

2004-12-01

Full Text Available his paper presents a recommender system for textual documents taken from web (given as bookmarks. The system uses for classification a combination of content, event and collaborative filters and for recommendation a modified Pearson-r algorithm. It uses implicit and explicit feedback for evaluating documents.

Methodological Study to Develop Standard Operational Protocol on Oral Drug Administration for Children.

Science.gov (United States)

Bijarania, Sunil Kumar; Saini, Sushma Kumari; Verma, Sanjay; Kaur, Sukhwinder

2017-05-01

To develop standard operational protocol (SOP) on oral drug administration and checklist to assess the implementation of the developed SOP. In this prospective methodological study, SOPs were developed in five phases. In the first phase, the preliminary draft of SOPs and checklists were prepared based on literature review, assessment of current practices and focus group discussion (FGD) with bedside working nurses. In the second phase, content validity was checked with the help of Delphi technique (12 experts). Total four drafts were prepared in stages and necessary modifications were made as per suggestions after each Delphi round. Fourth Delphi round was performed after conducting a pilot study. In the fourth phase, all bedside nurses were trained as per SOPs and asked to practice accordingly and observation of thirty oral drug administrations in children was done to check reliability of checklists for implementation of SOPs. In Phase-V, 7 FGDs were conducted with bedside nurses to assess the effectiveness of SOPs. The Content Validity Index (CVI) of SOP and checklists was 99.77%. Overall standardized Cronbach's alpha was calculated as 0.94. All the nurses felt that the SOP is useful. Valid and feasible SOP for drug administration to children through oral route along with valid and reliable checklist were developed. It is recommended to use this document for drug administration to children.

NPA4K development system using object-oriented methodology

International Nuclear Information System (INIS)

Jeong, Kwang Seong; Hahn, Do Hee

2000-11-01

NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced

NPA4K development system using object-oriented methodology

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwang Seong; Hahn, Do Hee

2000-11-01

NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced.

Health-related external cost assessment in Europe: methodological developments from ExternE to the 2013 Clean Air Policy Package.

Science.gov (United States)

van der Kamp, Jonathan; Bachmann, Till M

2015-03-03

"Getting the prices right" through internalizing external costs is a guiding principle of environmental policy making, one recent example being the EU Clean Air Policy Package released at the end of 2013. It is supported by impact assessments, including monetary valuation of environmental and health damages. For over 20 years, related methodologies have been developed in Europe in the Externalities of Energy (ExternE) project series and follow-up activities. In this study, we aim at analyzing the main methodological developments over time from the 1990s until today with a focus on classical air pollution-induced human health damage costs. An up-to-date assessment including the latest European recommendations is also applied. Using a case from the energy sector, we identify major influencing parameters: differences in exposure modeling and related data lead to variations in damage costs of up to 21%; concerning risk assessment and monetary valuation, differences in assessing long-term exposure mortality risks together with assumptions on particle toxicity explain most of the observed changes in damage costs. These still debated influencing parameters deserve particular attention when damage costs are used to support environmental policy making.

Recommendations for small water reactor development in China

International Nuclear Information System (INIS)

Chen Peipei; Zhou Yun

2012-01-01

This paper summarizes the history and features of Advanced Small Water Reactor (ASWR), and provides recommendations and strategies on ASWR research and development in China. The ASWR can be used in remote power grid and replaces mid/small size fossil plant economically, and thus can be an important part of energy saving and emission reduction policy. The safety and economy characteristics of ASWR are able to effectively expand nuclear energy market in emerging countries and developing countries. Therefore, ASWR should be considered as a critical part of China's nuclear technology and equipment export strategy. (authors)

Italian Society for Rheumatology recommendations for the management of hand osteoarthritis

Directory of Open Access Journals (Sweden)

M. Manara

2013-10-01

Full Text Available Hand osteoarthritis (OA is a common and potentially disabling disease, with different features from hip and knee OA so that a specific therapeutic approach is required. Evidence based recommendations for the management of hand OA were developed by the European League Against Rheumatism (EULAR in 2006. The Italian Society for Rheumatology (SIR aimed to update, adapt to national contest and disseminate the EULAR recommendations for the management of hand OA. The multidisciplinary group of experts included specialists involved in the management of patients with hand OA. In order to maintain consistency with EULAR recommendations, a similar methodology was utilized by the Italian group. The original propositions were reformulated in terms of a search query and for every recommendation a systematic search was conducted updating EULAR recommendations’ review. The propositions were translated in Italian and reformulated basing on collected evidences and expert opinion. The strength of recommendation was measured for each proposition with the EULAR ordinal and visual analogue scales. The original 11 propositions of EULAR recommendations were translated and adapted to Italian context. Further evidences were collected about non-pharmacological therapies, local treatments, intra-articular injection with SYSADOA and corticosteroids, and surgery. The SIR has developed updated recommendations for the management of hand OA adapted to the Italian healthcare system. Their implementation in clinical practice is expected to improve the management of patients with hand OA.

Development of enterprise architecture management methodology for teaching purposes

Directory of Open Access Journals (Sweden)

Dmitry V. Kudryavtsev

2017-01-01

Full Text Available Enterprise architecture is considered as a certain object of management, providing in business a general view of the enterprise and the mutual alignment of parts of this enterprise into a single whole, and as the discipline that arose based on this object. The architectural approach to the modeling and design of the enterprise originally arose in the field of information technology and was used to design information systems and technical infrastructure, as well as formalize business requirements. Since the early 2000’s enterprise architecture is increasingly used in organizational development and business transformation projects, especially if information technologies are involved. Enterprise architecture allows describing, analyzing and designing the company from the point of view of its structure, functioning and goal setting (motivation.In the context of this approach, the enterprise is viewed as a system of services, processes, goals and performance indicators, organizational units, information systems, data, technical facilities, etc. Enterprise architecture implements the idea of a systematic approach to managing and changing organizations in the digital economy where business is strongly dependent on information technologies.This increases the relevance of the suggested approach at the present time, when companies need to create and successfully implement a digital business strategy.Teaching enterprise architecture in higher educational institutions is a difficult task due to the interdisciplinary of this subject, its generalized nature and close connection with practical experience. In addition, modern enterprise architecture management methodologies are complex for students and contain many details that are relevant for individual situations.The paper proposes a simplified methodology for enterprise architecture management, which on the one hand will be comprehensible to students, and on the other hand, it will allow students to apply

METHODOLOGICAL APPROACHES FOR MODELING THE RURAL SETTLEMENT DEVELOPMENT

Directory of Open Access Journals (Sweden)

Gorbenkova Elena Vladimirovna

2017-10-01

Full Text Available Subject: the paper describes the research results on validation of a rural settlement developmental model. The basic methods and approaches for solving the problem of assessment of the urban and rural settlement development efficiency are considered. Research objectives: determination of methodological approaches to modeling and creating a model for the development of rural settlements. Materials and methods: domestic and foreign experience in modeling the territorial development of urban and rural settlements and settlement structures was generalized. The motivation for using the Pentagon-model for solving similar problems was demonstrated. Based on a systematic analysis of existing development models of urban and rural settlements as well as the authors-developed method for assessing the level of agro-towns development, the systems/factors that are necessary for a rural settlement sustainable development are identified. Results: we created the rural development model which consists of five major systems that include critical factors essential for achieving a sustainable development of a settlement system: ecological system, economic system, administrative system, anthropogenic (physical system and social system (supra-structure. The methodological approaches for creating an evaluation model of rural settlements development were revealed; the basic motivating factors that provide interrelations of systems were determined; the critical factors for each subsystem were identified and substantiated. Such an approach was justified by the composition of tasks for territorial planning of the local and state administration levels. The feasibility of applying the basic Pentagon-model, which was successfully used for solving the analogous problems of sustainable development, was shown. Conclusions: the resulting model can be used for identifying and substantiating the critical factors for rural sustainable development and also become the basis of

Application of a methodology for the development and validation of reliable process control software

International Nuclear Information System (INIS)

Ramamoorthy, C.V.; Mok, Y.R.; Bastani, F.B.; Chin, G.

1980-01-01

The necessity of a good methodology for the development of reliable software, especially with respect to the final software validation and testing activities, is discussed. A formal specification development and validation methodology is proposed. This methodology has been applied to the development and validation of a pilot software, incorporating typical features of critical software for nuclear power plants safety protection. The main features of the approach include the use of a formal specification language and the independent development of two sets of specifications. 1 ref

Lessons learned from IDeAl - 33 recommendations from the IDeAl-net about design and analysis of small population clinical trials.

Science.gov (United States)

Hilgers, Ralf-Dieter; Bogdan, Malgorzata; Burman, Carl-Fredrik; Dette, Holger; Karlsson, Mats; König, Franz; Male, Christoph; Mentré, France; Molenberghs, Geert; Senn, Stephen

2018-05-11

IDeAl (Integrated designs and analysis of small population clinical trials) is an EU funded project developing new statistical design and analysis methodologies for clinical trials in small population groups. Here we provide an overview of IDeAl findings and give recommendations to applied researchers. The description of the findings is broken down by the nine scientific IDeAl work packages and summarizes results from the project's more than 60 publications to date in peer reviewed journals. In addition, we applied text mining to evaluate the publications and the IDeAl work packages' output in relation to the design and analysis terms derived from in the IRDiRC task force report on small population clinical trials. The results are summarized, describing the developments from an applied viewpoint. The main result presented here are 33 practical recommendations drawn from the work, giving researchers a comprehensive guidance to the improved methodology. In particular, the findings will help design and analyse efficient clinical trials in rare diseases with limited number of patients available. We developed a network representation relating the hot topics developed by the IRDiRC task force on small population clinical trials to IDeAl's work as well as relating important methodologies by IDeAl's definition necessary to consider in design and analysis of small-population clinical trials. These network representation establish a new perspective on design and analysis of small-population clinical trials. IDeAl has provided a huge number of options to refine the statistical methodology for small-population clinical trials from various perspectives. A total of 33 recommendations developed and related to the work packages help the researcher to design small population clinical trial. The route to improvements is displayed in IDeAl-network representing important statistical methodological skills necessary to design and analysis of small-population clinical trials. The methods

Recommendations for e-learning in New Product Development teams

NARCIS (Netherlands)

Bitter-Rijpkema, Marlies; Pannekeet, Kees; Rutjens, Marjo

2009-01-01

Bitter-Rijpkema, M., Pannekeet, K., & Rutjens, M. (2009). Recommendations for e-learning in New Product Development teams. In S. Hambach, A. Martens, D. Tavangarian & B. Urban (Eds.), Proceedings of the 2nd International eLBa Science Conference (pp. 135-145). June, 17-19, 2009, Rostock, Germany:

A methodology to support the development of 4-year pavement management plan.

Science.gov (United States)

2014-07-01

A methodology for forming and prioritizing pavement maintenance and rehabilitation (M&R) projects was developed. : The Texas Department of Transportation (TxDOT) can use this methodology to generate defensible and cost-effective : 4-year pavement man...

Knowledge Management Audit - a methodology and case study

Directory of Open Access Journals (Sweden)

Thomas Lauer

2001-11-01

Full Text Available The strategic importance of knowledge in today’s organisation has been discussed extensively and research has looked at various issues in developing knowledge management systems. Both the characterisation of knowledge and alternate models for understanding the acquisition and use of such knowledge have taken on significant prominence. This is due to the complexities associated with acquiring and representing knowledge, and the varied nature of its use in knowledge work. However, the role of the knowledge workers and the processes that guide their knowledge work as they meet the knowledge goals of an organisation have received little attention. This paper proposes a knowledge audit (an assessment of the way knowledge processes meet an organisation’s knowledge goals methodology to understand the “gaps” in the needs of a knowledge worker before one develops KM systems. The methodology also uses “process change” research to help build a socio-technical environment critical for knowledge work. The audit methodology is applied to a particular case and the implementation of the audit recommendations is discussed. Future implications of such an audit are also discussed.

Selecting a software development methodology. [of digital flight control systems

Science.gov (United States)

Jones, R. E.

1981-01-01

The state of the art analytical techniques for the development and verification of digital flight control software is studied and a practical designer oriented development and verification methodology is produced. The effectiveness of the analytic techniques chosen for the development and verification methodology are assessed both technically and financially. Technical assessments analyze the error preventing and detecting capabilities of the chosen technique in all of the pertinent software development phases. Financial assessments describe the cost impact of using the techniques, specifically, the cost of implementing and applying the techniques as well as the relizable cost savings. Both the technical and financial assessment are quantitative where possible. In the case of techniques which cannot be quantitatively assessed, qualitative judgements are expressed about the effectiveness and cost of the techniques. The reasons why quantitative assessments are not possible will be documented.

Territory development as economic and geographical activity (theory, methodology, practice

Directory of Open Access Journals (Sweden)

Vitaliy Nikolaevich Lazhentsev

2013-03-01

Full Text Available Accents in a description of theory and methodology of territory development are displaced from distribution of the national benefits on formation of territorial natural and economic systems and organization of economical and geographical activity. The author reveals theconcept of «territory development» and reviews its placein thetheory and methodology of human geography and regionaleconomy. In the articletheindividual directions ofeconomic activity areconsidered. The author has made an attempt to definethesubject matter of five levels of «ideal» territorial and economic systems as a part of objects of the nature, societies, population settlement, production, infrastructure and management. The author’s position of interpretation of sequences of mechanisms of territory development working according to a Nested Doll principle (mechanism of economy, economic management mechanism, controlling mechanism of economy is presented. The author shows the indicators, which authentically define territory development

Recent developments in methodology for dynamic qualification of nuclear plant equipment

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1984-01-01

Dynamic qualification of nuclear plant electrical and mechanical equipment is performed basically under guidelines given in IEEE Standards 323 and 344, and a variety of NRC regulatory guides. Over the last fifteen years qualification methodology prescribed by these documents has changed significantly as interpretations, equipment capability, and imagination of the qualification engineers have progressed. This progress has been sparked by concurrent NRC and industry sponsored research programs that have identified anomalies and developed new methodologies for resolving them. Revisions of the standards have only resulted after a lengthy debate of all such new information and subsequent judgment of its validity. The purpose of this paper is to review a variety of procedural improvements and developments in qualification methodology that are under current consideration as revisions to the standards. Many of the improvements and developments have resulted from recent research programs. All are very likely to appear in one type of standard or another in the near future

Extending statistical boosting. An overview of recent methodological developments.

Science.gov (United States)

Mayr, A; Binder, H; Gefeller, O; Schmid, M

2014-01-01

Boosting algorithms to simultaneously estimate and select predictor effects in statistical models have gained substantial interest during the last decade. This review highlights recent methodological developments regarding boosting algorithms for statistical modelling especially focusing on topics relevant for biomedical research. We suggest a unified framework for gradient boosting and likelihood-based boosting (statistical boosting) which have been addressed separately in the literature up to now. The methodological developments on statistical boosting during the last ten years can be grouped into three different lines of research: i) efforts to ensure variable selection leading to sparser models, ii) developments regarding different types of predictor effects and how to choose them, iii) approaches to extend the statistical boosting framework to new regression settings. Statistical boosting algorithms have been adapted to carry out unbiased variable selection and automated model choice during the fitting process and can nowadays be applied in almost any regression setting in combination with a large amount of different types of predictor effects.

Development of a novel methodology for indoor emission source identification

DEFF Research Database (Denmark)

Han, K.H.; Zhang, J.S.; Knudsen, H.N.

2011-01-01

The objective of this study was to develop and evaluate a methodology to identify individual sources of emissions based on the measurements of mixed air samples and the emission signatures of individual materials previously determined by Proton Transfer Reaction-Mass Spectrometry (PTR-MS), an on......-line analytical device. The methodology based on signal processing principles was developed by employing the method of multiple regression least squares (MRLS) and a normalization technique. Samples of nine typical building materials were tested individually and in combination, including carpet, ceiling material...... experiments and investigation are needed for cases where the relative emission rates among different compounds may change over a long-term period....

Grading quality of evidence and strength of recommendations in clinical practice guidelines part 3 of 3. The GRADE approach to developing recommendations

NARCIS (Netherlands)

Brożek, J. L.; Akl, E. A.; Compalati, E.; Kreis, J.; Terracciano, L.; Fiocchi, A.; Ueffing, E.; Andrews, J.; Alonso-Coello, P.; Meerpohl, J. J.; Lang, D. M.; Jaeschke, R.; Williams, J. W.; Phillips, B.; Lethaby, A.; Bossuyt, P.; Glasziou, P.; Helfand, M.; Watine, J.; Afilalo, M.; Welch, V.; Montedori, A.; Abraha, I.; Horvath, A. R.; Bousquet, J.; Guyatt, G. H.; Schünemann, H. J.

2011-01-01

This is the third and last article in the series about the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach to grading the quality of evidence and the strength of recommendations in clinical practice guidelines and its application in the field of allergy. We

Ontological realism: A methodology for coordinated evolution of scientific ontologies.

Science.gov (United States)

Smith, Barry; Ceusters, Werner

2010-11-15

Since 2002 we have been testing and refining a methodology for ontology development that is now being used by multiple groups of researchers in different life science domains. Gary Merrill, in a recent paper in this journal, describes some of the reasons why this methodology has been found attractive by researchers in the biological and biomedical sciences. At the same time he assails the methodology on philosophical grounds, focusing specifically on our recommendation that ontologies developed for scientific purposes should be constructed in such a way that their terms are seen as referring to what we call universals or types in reality. As we show, Merrill's critique is of little relevance to the success of our realist project, since it not only reveals no actual errors in our work but also criticizes views on universals that we do not in fact hold. However, it nonetheless provides us with a valuable opportunity to clarify the realist methodology, and to show how some of its principles are being applied, especially within the framework of the OBO (Open Biomedical Ontologies) Foundry initiative.

Methodologies for local development in smart society

Directory of Open Access Journals (Sweden)

Lorena BĂTĂGAN

2012-07-01

Full Text Available All of digital devices which are connected through the Internet, are producing a big quantity of data. All this information can be turned into knowledge because we now have the computational power and solutions for advanced analytics to make sense of it. With this knowledge, cities could reduce costs, cut waste, and improve efficiency, productivity and quality of life for their citizens. The efficient/smart cities are characterized by more importance given to environment, resources, globalization and sustainable development. This paper represents a study on the methodologies for urban development that become the central element to our society.

Multicriteria decision methodology for selecting technical alternatives in the Mixed Waste Integrated Program

International Nuclear Information System (INIS)

Ferrada, J.J.; Berry, J.B.

1993-11-01

The US Department of Energy (DOE) Mixed Waste Integrated Program (MWIP) has as one of its tasks the identification of a decision methodology and key decision criteria for the selection methodology. The aim of a multicriteria analysis is to provide an instrument for a systematic evaluation of distinct alternative projects. Determination of this methodology will clarify (1) the factors used to evaluate these alternatives, (2) the evaluator's view of the importance of the factors, and (3) the relative value of each alternative. The selected methodology must consider the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) decision-making criteria for application to the analysis technology subsystems developed by the DOE Office of Technology Development. This report contains a compilation of several decision methodologies developed in various national laboratories, institutions, and universities. The purpose of these methodologies may vary, but the core of the decision attributes are very similar. Six approaches were briefly analyzed; from these six, in addition to recommendations made by the MWIP technical support group leaders and CERCLA, the final decision methodology was extracted. Slight variations are observed in the many methodologies developed by different groups, but most of the analyzed methodologies address similar aspects for the most part. These common aspects were the core of the methodology suggested in this report for use within MWIP for the selection of technologies. The set of criteria compiled and developed for this report have been grouped in five categories: (1) process effectiveness, (2) developmental status, (3) life-cycle cost, (4) implementability, and (5) regulatory compliance

Using the Grade Approach to Support the Development of Recommendations for Public Health Interventions in Radiation Emergencies

International Nuclear Information System (INIS)

Carr, Z.; Clarke, M.; Akl, E.A.; Schneider, R.; Murith, C.; Li, C.; Parrish-Sprowl, J.; Stenke, L.; Cui-Ping, L.; Bertrand, S.; Miller, C.

2016-01-01

The World Health Organization (WHO) guideline development policy requires that WHO guidelines be developed in a manner that is transparent and based on all available evidences, which must be synthesised and formally assessed for quality. To fulfil this requirement, the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach of rating quality of evidence and grading strength of recommendations was applied when developing the WHO recommendations on public health interventions in radiation emergencies. The guideline development group (GDG) formulated 10 PICO (P: population; I: intervention; C: comparator; O: outcomes) questions to guide the development of recommendations on response interventions during the early/intermediate and late emergency phases and on risk communications for mitigating psycho-social impact of radiation emergencies. For each PICO question, an extensive evidence search and systematic review was conducted. The GDG then formulated the recommendations using the evidence to recommendation (E-2-R) decision-making matrix and evaluated the strength of each recommendation. (authors)

Digital Methodology to implement the ECOUTER engagement process

OpenAIRE

Wilson, Rebecca C.; Butters, Oliver W.; Clark, Tom; Minion, Joel; Turner, Andrew; Murtagh, Madeleine J.

2017-01-01

ECOUTER (Employing COnceptUal schema for policy and Translation Engagement in Research) - French for 'to listen' - is a new stakeholder engagement method incorporating existing evidence to help participants draw upon their own knowledge of cognate issues and interact on a topic of shared concern. The results of an ECOUTER can form the basis of recommendations for research, governance, practice and/or policy. This paper describes the development of a digital methodology for the ECOUTER engagem...

Recommendations for the development of e-modules for the continuing professional development of European dentists.

Science.gov (United States)

Kavadella, A; Kossioni, A E; Tsiklakis, K; Cowpe, J; Bullock, A; Barnes, E; Bailey, S; Thomas, H; Thomas, R; Karaharju-Suvanto, T; Suomalainen, K; Kersten, H; Povel, E; Giles, M; Walmsley, D; Soboleva, U; Liepa, A; Akota, I

2013-05-01

To provide evidence-based and peer-reviewed recommendations for the development of dental continuing professional development (CPD) learning e-modules. The present recommendations are consensus recommendations of the DentCPD project team and were informed by a literature research, consultations from e-learning and IT expert, discussions amongst the participants attending a special interest group during the 2012 ADEE meeting, and feedback from the evaluation procedures of the exemplar e-module (as described in a companion paper within this Supplement). The main focus of these recommendations is on the courses and modules organised and offered by dental schools. E-modules for dental CPD, as well as for other health professionals' continuing education, have been implemented and evaluated for a number of years. Research shows that the development of e-modules is a team process, undertaken by academics, subject experts, pedagogists, IT and web designers, learning technologists and librarians. The e-module must have clear learning objectives (outcomes), addressing the learners' individual needs, and must be visually attractive, relevant, interactive, promoting critical thinking and providing feedback. The text, graphics and animations must support the objectives and enable the learning process by creating an attractive, easy to navigate and interactive electronic environment. Technology is usually a concern for learners and tutors; therefore, it must be kept simple and interoperable within different systems and software. The pedagogical and technological proficiency of educators is of paramount importance, yet remains a challenge in many instances. The development of e-courses and modules for dental CPD is an endeavour undertaken by a group of professionals. It must be underpinned by sound pedagogical and e-learning principles and must incorporate elements for effective visual learning and visual design and a simple, consistent technology. © 2013 John Wiley & Sons A/S.

An approach to SOA development methodology: SOUP comparison with RUP and XP

Directory of Open Access Journals (Sweden)

Sandra Svanidzaitė

2014-08-01

Full Text Available Service oriented architecture (SOA is an architecture for distributed applications composed of distributed services with weak coupling that are designed to meet business requirements. One of the research priorities in the field of SOA is creating such software design and development methodology (SDDM that takes into account all principles of this architecture and allows for effective and efficient application development. A lot of investigation has been carried out to find out whether can one of popular SDDM, such as agile methodologies or RUP suits, be adapted for SOA or there is a need to create some new SOA-oriented SDDM. This paper compares one of SOA-oriented SDDM – SOUP – with RUP and XP methodologies. The aim is to find out whether the SOUP methodology is already mature enough to assure successful development of SOA applications. This aim is accomplished by comparing activities, artifacts of SOUP and RUP and emphasizing which XP practices are used in SOUP.DOI: http://dx.doi.org/10.15181/csat.v2i1.77 

The effectiveness of scoliosis screening programs: methods for systematic review and expert panel recommendations formulation

Science.gov (United States)

2013-01-01

Background Literature on scoliosis screening is vast, however because of the observational nature of available data and methodological flaws, data interpretation is often complex, leading to incomplete and sometimes, somewhat misleading conclusions. The need to propose a set of methods for critical appraisal of the literature about scoliosis screening, a comprehensive summary and rating of the available evidence appeared essential. Methods To address these gaps, the study aims were: i) To propose a framework for the assessment of published studies on scoliosis screening effectiveness; ii) To suggest specific questions to be answered on screening effectiveness instead of trying to reach a global position for or against the programs; iii) To contextualize the knowledge through expert panel consultation and meaningful recommendations. The general methodological approach proceeds through the following steps: Elaboration of the conceptual framework; Formulation of the review questions; Identification of the criteria for the review; Selection of the studies; Critical assessment of the studies; Results synthesis; Formulation and grading of recommendations in response to the questions. This plan follows at best GRADE Group (Grades of Recommendation, Assessment, Development and Evaluation) requirements for systematic reviews, assessing quality of evidence and grading the strength of recommendations. Conclusions In this article, the methods developed in support of this work are presented since they may be of some interest for similar reviews in scoliosis and orthopaedic fields. PMID:23883346

Methodological guidelines for developing accident modification functions

DEFF Research Database (Denmark)

Elvik, Rune

2015-01-01

This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...... the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main...

Synthesis of methodology development and case studies

OpenAIRE

Roetter, R.P.; Keulen, van, H.; Laar, van, H.H.

2000-01-01

The .Systems Research Network for Ecoregional Land Use Planning in Support of Natural Resource Management in Tropical Asia (SysNet). was financed under the Ecoregional Fund, administered by the International Service for National Agricultural Research (ISNAR). The objective of the project was to develop and evaluate methodologies and tools for land use analysis, and apply them at the subnational scale to support agricultural and environmental policy formulation. In the framework of this projec...

Considering children's advertising literacy from a methodological point of view : past practices and future recommendations

OpenAIRE

Zarouali, Brahim; Pauw, De, Pieter; Ponnet, Koen; Walrave, Michel; Poels, Karolien; Cauberghe, Veroline; Hudders, Liselot

2018-01-01

Abstract: Childrens advertising literacy is a well-documented research area. Yet, the literature on how to measure advertising literacy is not straightforward due to conceptual and operational differences in the existing studies. This has led to inconsistent results with regard to the development, possession and application of advertising literacy. The aim of this article is to give an overview of the different measurement methodologies used in past research efforts to assess childrens advert...

A Comparative Analysis of Two Software Development Methodologies: Rational Unified Process and Extreme Programming

Directory of Open Access Journals (Sweden)

Marcelo Rafael Borth

2014-01-01

Full Text Available Software development methodologies were created to meet the great market demand for innovation, productivity, quality and performance. With the use of a methodology, it is possible to reduce the cost, the risk, the development time, and even increase the quality of the final product. This article compares two of these development methodologies: the Rational Unified Process and the Extreme Programming. The comparison shows the main differences and similarities between the two approaches, and highlights and comments some of their predominant features.

Recommendations for a sustainable development of biofuels in France

International Nuclear Information System (INIS)

Douaud, A.; Gruson, J.F.

2006-01-01

The biofuels are presented as a solution to the greenhouse gases and the petroleum consumption decrease. The development of the biofuels needs an active research of the production, transformation and use costs improvement. It will be necessary to prepare the market of the biofuels to the globalization. Some recommendations are also provided in the domains of the vegetal oil ester, the ethanol for the diesel and for the development of simulation tools to evaluate the costs. (A.L.B.)

Uncertainty and sensitivity analysis methodology in a level-I PSA (Probabilistic Safety Assessment)

International Nuclear Information System (INIS)

Nunez McLeod, J.E.; Rivera, S.S.

1997-01-01

This work presents a methodology for sensitivity and uncertainty analysis, applicable to a probabilistic safety assessment level I. The work contents are: correct association of distributions to parameters, importance and qualification of expert opinions, generations of samples according to sample sizes, and study of the relationships among system variables and system response. A series of statistical-mathematical techniques are recommended along the development of the analysis methodology, as well different graphical visualization for the control of the study. (author) [es

A vision on methodology for integrated sustainable urban development: bequest

NARCIS (Netherlands)

Bentivegna, V.; Curwell, S.; Deakin, M.; Lombardi, P.; Mitchell, G.; Nijkamp, P.

2002-01-01

The concepts and visions of sustainable development that have emerged in the post-Brundtland era are explored in terms laying the foundations for a common vision of sustainable urban development (SUD). The described vision and methodology for SUD resulted from the activities of an international

Risk assessment and ranking methodologies for hazardous chemical defense waste: a state-of-the-art review and evaluation. Task 1 report

International Nuclear Information System (INIS)

Chu, M.S.Y.; Rodricks, J.V.; St Hilaire, C.; Bras, R.L.

1986-06-01

This report summarizes the work performed under Task 1 of the Risk Assessment Evaluation Task under the Hazardous Chemical Defense Waste Management Program of the Department of Energy (DOE). The objective of Task 1 was to identify, review, and evaluate the state-of-the-art tools and techniques available for ranking and evaluating disposal facilities. These tools were evaluated for their applicability to DOE's mixed hazardous chemical and radioactive waste sites. Various ranking methodologies were reviewed and three were evaluated in detail. Areas that were found to be deficient in each ranking methodology were presented in the report. Recommendations were given for the development of an improved ranking methodology for use on DOE's sites. A literature review was then performed on the various components of a risk assessment methodology. They include source term evaluation, geosphere transport models, exposure pathways models, dose effects models, and sensitivity/uncertainty techniques. A number of recommendations have been made in the report based on the review and evaluation for the development of a comprehensive risk assessment methodology in evaluating mixed waste disposal sites

Recommendations for routine reporting on indications for cesarean delivery in developing countries.

Science.gov (United States)

Stanton, Cynthia; Ronsmans, Carine

2008-09-01

Cesarean delivery rates are increasing rapidly in many developing countries, particularly among wealthy women. Poor women have lower rates, often so low that they do not reach the minimum rate of 1 percent. Little data are available on clinical indications for cesarean section, information that could assist in understanding why cesarean delivery rates have changed. This paper presents recommendations for routine reporting on indications for cesarean delivery in developing countries. These recommendations resulted from an international consultation of researchers held in February 2006 to promote the collection of comparable data to understand change in, or composition of, the cesarean delivery rate in developing countries. Data are presented from selected countries, categorizing cesareans by three classification systems. A single classification system was recommended for use in both high and low cesarean delivery rate settings, given that underuse and overuse of cesarean section are evident within many populations. The group recommended a hierarchical categorization, prioritizing cesareans performed for absolute maternal indications. Categorization among the remaining nonabsolute indications is based on the primary indication for the procedure and include maternal and fetal indications and psychosocial indications, required for high cesarean delivery rate settings. Data on indications for cesarean sections are available everywhere the procedure is performed. All that is required is compilation and review at facility and at higher levels. Advocacy within ministries of health and medical professional organizations is required to advance these recommendations since researchers have inadequately communicated the health effects of both underuse and overuse of cesarean delivery.

Setting priorities for space research: An experiment in methodology

Science.gov (United States)

1995-01-01

In 1989, the Space Studies Board created the Task Group on Priorities in Space Research to determine whether scientists should take a role in recommending priorities for long-term space research initiatives and, if so, to analyze the priority-setting problem in this context and develop a method by which such priorities could be established. After answering the first question in the affirmative in a previous report, the task group set out to accomplish the second task. The basic assumption in developing a priority-setting process is that a reasoned and structured approach for ordering competing initiatives will yield better results than other ways of proceeding. The task group proceeded from the principle that the central criterion for evaluating a research initiative must be its scientific merit -- the value of the initiative to the proposing discipline and to science generally. The group developed a two-stage methodology for priority setting and constructed a procedure and format to support the methodology. The first of two instruments developed was a standard format for structuring proposals for space research initiatives. The second instrument was a formal, semiquantitative appraisal procedure for evaluating competing proposals. This report makes available complete templates for the methodology, including the advocacy statement and evaluation forms, as well as an 11-step schema for a priority-setting process. From the beginning of its work, the task group was mindful that the issue of priority setting increasingly pervades all of federally supported science and that its work would have implications extending beyond space research. Thus, although the present report makes no recommendations for action by NASA or other government agencies, it provides the results of the task group's work for the use of others who may study priority-setting procedures or take up the challenge of implementing them in the future.

The first international training course on basic nuclear forensic methodologies for practitioners

International Nuclear Information System (INIS)

Schwantes, Jon M.; Smith, David K.

2013-01-01

The IAEA, in cooperation with the United States National Nuclear Security Administration, developed and conducted the first international training course on basic nuclear forensic methodologies for practitioners in 2012. An overview of the major elements of this landmark workshop as well as successes and recommendations for future improvement are presented here. (author)

An informatics agenda for public health: summarized recommendations from the 2011 AMIA PHI Conference

Science.gov (United States)

Goodman, Kenneth W; Gotham, Ivan J; Holmes, John H; Lang, Lisa; Miner, Kathleen; Potenziani, David D; Richards, Janise; Turner, Anne M; Fu, Paul C

2012-01-01

The AMIA Public Health Informatics 2011 Conference brought together members of the public health and health informatics communities to revisit the national agenda developed at the AMIA Spring Congress in 2001, assess the progress that has been made in the past decade, and develop recommendations to further guide the field. Participants met in five discussion tracks: technical framework; research and evaluation; ethics; education, professional training, and workforce development; and sustainability. Participants identified 62 recommendations, which clustered into three key themes related to the need to (1) enhance communication and information sharing within the public health informatics community, (2) improve the consistency of public health informatics through common public health terminologies, rigorous evaluation methodologies, and competency-based training, and (3) promote effective coordination and leadership that will champion and drive the field forward. The agenda and recommendations from the meeting will be disseminated and discussed throughout the public health and informatics communities. Both communities stand to gain much by working together to use these recommendations to further advance the application of information technology to improve health. PMID:22395299

Development of a methodology for conducting an integrated HRA/PRA --

Energy Technology Data Exchange (ETDEWEB)

Luckas, W.J.; Barriere, M.T.; Brown, W.S. (Brookhaven National Lab., Upton, NY (United States)); Wreathall, J. (Wreathall (John) and Co., Dublin, OH (United States)); Cooper, S.E. (Science Applications International Corp., McLean, VA (United States))

1993-01-01

During Low Power and Shutdown (LP S) conditions in a nuclear power plant (i.e., when the reactor is subcritical or at less than 10--15% power), human interactions with the plant's systems will be more frequent and more direct. Control is typically not mediated by automation, and there are fewer protective systems available. Therefore, an assessment of LP S related risk should include a greater emphasis on human reliability than such an assessment made for power operation conditions. In order to properly account for the increase in human interaction and thus be able to perform a probabilistic risk assessment (PRA) applicable to operations during LP S, it is important that a comprehensive human reliability assessment (HRA) methodology be developed and integrated into the LP S PRA. The tasks comprising the comprehensive HRA methodology development are as follows: (1) identification of the human reliability related influences and associated human actions during LP S, (2) identification of potentially important LP S related human actions and appropriate HRA framework and quantification methods, and (3) incorporation and coordination of methodology development with other integrated PRA/HRA efforts. This paper describes the first task, i.e., the assessment of human reliability influences and any associated human actions during LP S conditions for a pressurized water reactor (PWR).

Development of Management Methodology for Engineering Production Quality

Science.gov (United States)

Gorlenko, O.; Miroshnikov, V.; Borbatc, N.

2016-04-01

The authors of the paper propose four directions of the methodology developing the quality management of engineering products that implement the requirements of new international standard ISO 9001:2015: the analysis of arrangement context taking into account stakeholders, the use of risk management, management of in-house knowledge, assessment of the enterprise activity according to the criteria of effectiveness

[Assessment of the methodological quality of theses submitted to the Faculty of Medicine Fez].

Science.gov (United States)

Boly, A; Tachfouti, N; Zohoungbogbo, I S S; Achhab, Y El; Nejjari, C

2014-06-09

A thesis in medicine is a scientific work which allows a medical student to acquire a Doctor of Medicine degree. It is therefore recommended that theses presented by students fulfill essential methodological criteria in order to obtain scientifically credible results and recommendations. The aim of this study was to assess the methodology of thesis presented to the Faculty of Medicine in Fez in 2008. We developed an evaluation table containing questions on the different sections of the IMRAD structure on which these theses were based and we estimated the proportion of theses that conformed to each criterion. There were 160 theses on various specialties presented in 2008. The majority of the theses (79.3%) were case series. Research questions were clearly expressed in 62.0% but the primary objectives were pertinent in only 52.0%. Our study shows that there were important deficiencies in the methodological rigor of the theses and very little representation of the theses in publications.

A Life-Cycle Cost Estimating Methodology for NASA-Developed Air Traffic Control Decision Support Tools

Science.gov (United States)

Wang, Jianzhong Jay; Datta, Koushik; Landis, Michael R. (Technical Monitor)

2002-01-01

This paper describes the development of a life-cycle cost (LCC) estimating methodology for air traffic control Decision Support Tools (DSTs) under development by the National Aeronautics and Space Administration (NASA), using a combination of parametric, analogy, and expert opinion methods. There is no one standard methodology and technique that is used by NASA or by the Federal Aviation Administration (FAA) for LCC estimation of prospective Decision Support Tools. Some of the frequently used methodologies include bottom-up, analogy, top-down, parametric, expert judgement, and Parkinson's Law. The developed LCC estimating methodology can be visualized as a three-dimensional matrix where the three axes represent coverage, estimation, and timing. This paper focuses on the three characteristics of this methodology that correspond to the three axes.

How to adjust media recommendations on reporting suicidal behavior to new media developments

NARCIS (Netherlands)

Malony, J.; Pfuhlmann, B.; Arensman, E.; Coffey, C.; Gusmão, R.; Poštuvan, V.; Scheerder, G.; Sisask, M.; van der Feltz, C.M.; Hegerl, U.; Schmidtke, A.

2014-01-01

This study examines the inclusion of preventive factors and new media developments in media recommendations on suicide reporting. Of the 193 member states of the United Nations screened for media recommendations, information was available for 74 countries. Similarities and differences in their

Prometheus Reactor I and C Software Development Methodology, for Action

International Nuclear Information System (INIS)

T. Hamilton

2005-01-01

The purpose of this letter is to submit the Reactor Instrumentation and Control (I and C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I and C Software Development Process Manual and Reactor Module Software Development Plan to NR for information

Vulnerability or Sensitivity to the Environment? Methodological Issues, Trends, and Recommendations in Gene–Environment Interactions Research in Human Behavior

Directory of Open Access Journals (Sweden)

Caroline Leighton

2017-06-01

Full Text Available Research on the potential role of gene–environment interactions (GxE in explaining vulnerability to psychopathology in humans has witnessed a shift from a diathesis-stress perspective to differential susceptibility approaches. This paper critically reviews methodological issues and trends in this body of research. Databases were screened for studies of GxE in the prediction of personality traits, behavior, and mental health disorders in humans published between January 2002 and January 2015. In total, 315 papers were included. Results showed that 34 candidate genes have been included in GxE studies. Independent of the type of environment studied (early or recent life events, positive or negative environments, about 67–83% of studies have reported significant GxE interactions, which is consistent with a social susceptibility model. The percentage of positive results does not seem to differ depending on the gene studied, although publication bias might be involved. However, the number of positive findings differs depending on the population studied (i.e., young adults vs. older adults. Methodological considerations limit the ability to draw strong conclusions, particularly as almost 90% (n = 283/315 of published papers are based on samples from North America and Europe, and about 70% of published studies (219/315 are based on samples that were also used in other reports. At the same time, there are clear indications of methodological improvements over time, as is shown by a significant increase in longitudinal and experimental studies as well as in improved minimum genotyping. Recommendations for future research, such as minimum quality assessment of genes and environmental factors, specifying theoretical models guiding the study, and taking into account of cultural, ethnic, and lifetime perspectives, are formulated.

The probabilistic approach in the licensing process and the development of probabilistic risk assessment methodology in Japan

International Nuclear Information System (INIS)

Togo, Y.; Sato, K.

1981-01-01

The probabilistic approach has long seemed to be one of the most comprehensive methods for evaluating the safety of nuclear plants. So far, most of the guidelines and criteria for licensing are based on the deterministic concept. However, there have been a few examples to which the probabilistic approach was directly applied, such as the evaluation of aircraft crashes and turbine missiles. One may find other examples of such applications. However, a much more important role is now to be played by this concept, in implementing the 52 recommendations from the lessons learned from the TMI accident. To develop the probabilistic risk assessment methodology most relevant to Japanese situations, a five-year programme plan has been adopted and is to be conducted by the Japan Atomic Research Institute from fiscal 1980. Various problems have been identified and are to be solved through this programme plan. The current status of developments is described together with activities outside the government programme. (author)

Spatial Development Modeling Methodology Application Possibilities in Vilnius

Directory of Open Access Journals (Sweden)

Lina Panavaitė

2017-05-01

Full Text Available In order to control the continued development of high-rise buildings and their irreversible visual impact on the overall silhouette of the city, the great cities of the world introduced new methodological principles to city’s spatial development models. These methodologies and spatial planning guidelines are focused not only on the controlled development of high-rise buildings, but on the spatial modelling of the whole city by defining main development criteria and estimating possible consequences. Vilnius city is no exception, however the re-establishment of independence of Lithuania caused uncontrolled urbanization process, so most of the city development regulations emerged as a consequence of unmanaged processes of investors’ expectations legalization. The importance of consistent urban fabric as well as conservation and representation of city’s most important objects gained attention only when an actual threat of overshadowing them with new architecture along with unmanaged urbanization in the city center or urban sprawl at suburbia, caused by land-use projects, had emerged. Current Vilnius’ spatial planning documents clearly define urban structure and key development principles, however the definitions are relatively abstract, causing uniform building coverage requirements for territories with distinct qualities and simplifying planar designs which do not meet quality standards. The overall quality of urban architecture is not regulated. The article deals with current spatial modeling methods, their individual parts, principles, the criteria for quality assessment and their applicability in Vilnius. The text contains an outline of possible building coverage regulations and impact assessment criteria for new development. The article contains a compendium of requirements for high-quality spatial planning and building design.

Development and application of a deterministic-realistic hybrid methodology for LOCA licensing analysis

International Nuclear Information System (INIS)

Liang, Thomas K.S.; Chou, Ling-Yao; Zhang, Zhongwei; Hsueh, Hsiang-Yu; Lee, Min

2011-01-01

Highlights: → A new LOCA licensing methodology (DRHM, deterministic-realistic hybrid methodology) was developed. → DRHM involves conservative Appendix K physical models and statistical treatment of plant status uncertainties. → DRHM can generate 50-100 K PCT margin as compared to a traditional Appendix K methodology. - Abstract: It is well recognized that a realistic LOCA analysis with uncertainty quantification can generate greater safety margin as compared with classical conservative LOCA analysis using Appendix K evaluation models. The associated margin can be more than 200 K. To quantify uncertainty in BELOCA analysis, generally there are two kinds of uncertainties required to be identified and quantified, which involve model uncertainties and plant status uncertainties. Particularly, it will take huge effort to systematically quantify individual model uncertainty of a best estimate LOCA code, such as RELAP5 and TRAC. Instead of applying a full ranged BELOCA methodology to cover both model and plant status uncertainties, a deterministic-realistic hybrid methodology (DRHM) was developed to support LOCA licensing analysis. Regarding the DRHM methodology, Appendix K deterministic evaluation models are adopted to ensure model conservatism, while CSAU methodology is applied to quantify the effect of plant status uncertainty on PCT calculation. Generally, DRHM methodology can generate about 80-100 K margin on PCT as compared to Appendix K bounding state LOCA analysis.

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

Science.gov (United States)

Hall, Edward; Magner, James

2011-01-01

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

A European test of pesticide-leaching models: methodology and major recommendations

NARCIS (Netherlands)

Vanclooster, M.; Boesten, J.J.T.I.; Trevisan, M.; Brown, C.D.; Capri, E.; Eklo, O.M.; Gottesbüren, B.; Gouy, V.; Linden, van der A.M.A.

2000-01-01

Testing of pesticide-leaching models is important in view of their increasing use in pesticide registration procedures in the European Union. This paper presents the methodology and major conclusions of a test of pesticide-leaching models. Twelve models simulating the vertical one-dimensional

Recommendations for the use of molecular diagnostics in the diagnosis of allergic dis-eases.

Science.gov (United States)

Villalta, D; Tonutti, E; Bizzaro, N; Brusca, I; Sargentini, V; Asero, R; Bilo, M B; Manzotti, G; Murzilli, F; Cecchi, L; Musarra, A

2018-03-01

The Study Group on Allergology of the Italian Society of Clinical Pathology and Laboratory Medicine (SIPMeL) and the Associazione Italiana degli Allergologi e Immunologi Territoriali e Ospedalieri (AAIITO) developed the present recommendations on the diagnosis of allergic diseases based on the use of molecular allergenic components, whose purpose is to provide the pathologists and the clinicians with information and algorithms enabling a proper use of this second-level diagnostics. Molecular diagnostics allows definition of the exact sensitization profile of the allergic patient. The methodology followed to develop these recommendations included an initial phase of discussion between all the components to integrate the knowledge derived from scientific evidence, a revision of the recommendations made by Italian and foreign experts, and the subsequent production of this document to be disseminated to all those who deal with allergy diagnostics.

A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

Science.gov (United States)

Bailey, Brandon

2016-01-01

Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

European methodology for qualification of NDT as developed by ENIQ

International Nuclear Information System (INIS)

Champigny, F.; Sandberg, U.; Engl, G.; Crutzen, S.; Lemaitre, P.

1997-01-01

The European Network for Inspection Qualification (ENIQ) groups the major part of the nuclear power plant operators in the European Union (and Switzerland). The main objective of ENIQ is to co-ordinate and manage at European level expertise and resources for the qualification of NDE inspection systems, primarily for nuclear components. In the framework of ENIQ the European methodology for qualification of NDT has been developed. In this paper the main principles of the European methodology are given besides the main activities and organisation of ENIQ. (orig.)

Systematic and transparent inclusion of ethical issues and recommendations in clinical practice guidelines: a six-step approach.

Science.gov (United States)

Mertz, Marcel; Strech, Daniel

2014-12-04

Clinical practice guidelines (CPGs), a core tool to foster medical professionalism, differ widely in whether and how they address disease-specific ethical issues (DSEIs), and current manuals for CPG development are silent on this issue. The implementation of an explicit method faces two core challenges: first, it adds further complexity to CPG development and requires human and financial resources. Second, in contrast to the in-depth treatment of ethical issues that is standard in bioethics, the inclusion of DSEIs in CPGs need to be more pragmatic, reductive, and simplistic, but without rendering the resulting recommendations useless or insufficiently justified. This paper outlines a six-step approach, EthicsGuide, for the systematic and transparent inclusion of ethical issues and recommendations in CPGs. The development of EthicsGuide is based on (a) methodological standards in evidence-based CPG development, (b) principles of bioethics, (c) research findings on how DSEIs are currently addressed in CPGs, and (d) findings from two proof-of-concept analyses of the EthicsGuide approach. The six steps are 1) determine the DSEI spectrum and the need for ethical recommendations; 2) develop statements on which to base ethical recommendations; 3) categorize, classify, condense, and paraphrase the statements; 4) write recommendations in a standard form; 5) validate and justify recommendations, making any necessary modifications; and 6) address consent. All six steps necessarily come into play when including DSEIs in CPGs. If DSEIs are not explicitly addressed, they are unavoidably dealt with implicitly. We believe that as ethicists gain greater involvement in decision-making about health, personal rights, or economic issues, they should make their methods transparent and replicable by other researchers; and as ethical issues become more widely reflected in CPGs, CPG developers have to learn how to address them in a methodologically adequate way. The approach proposed

'Reference Biospheres' for solid radioactive waste disposal: the BIOMASS Methodology

International Nuclear Information System (INIS)

Crossland, I.G.; Pinedo, P.; Kessler, J.H.; Torres-Vidal, C.; Walters, B.

2005-01-01

The BIOMASS Theme 1 project has developed a methodology for the logical and defensible construction of 'assessment biospheres': mathematical representations of biospheres used in the total system performance assessment of radioactive waste disposal. The BIOMASS Methodology provides a systematic approach to decision making, including decisions on how to address biosphere change. The BIOMASS Methodology was developed through consultation and collaboration with many relevant organisations, including regulators, operators and a variety of independent experts. It has been developed to be practical and to be consistent with recommendations from ICRP and IAEA on radiation protection in the context of the disposal of long-lived solid radioactive wastes. The five main steps in the methodology are described in this paper. The importance of a clear assessment context, to clarify intentions and to support a coherent biosphere assessment process within an overall repository performance assessment, is strongly emphasised. A well described assessment context is an important tool for ensuring consistency across the performance assessment as a whole. The use of interaction matrices has been found to be helpful in clarifying the interactions between different habitats within the biosphere system and the significant radionuclide transfer pathways within the biosphere system. Matrices also provide a useful means of checking for consistency

Development and delivery of a workshop methodology: planning for biomass power plant projects

Energy Technology Data Exchange (ETDEWEB)

Gray, A.J.; Delbridge, P.; Trevorrow, E.; Pile, C.

2001-07-01

This report gives details of the approach used to develop a workshop methodology to help planners and stakeholders address key issues that may arise when submitting a planning application for a biomass power plant in the light of the UK government's energy and climate change targets. The results of interviews with stakeholders (central government, regulatory authorities, developers, planners, non-governmental organisations, local community, resident groups) are summarised, and the NIMBY (not in my back yard) syndrome, the lack of trust in the developer, and lack of awareness of the use of biomass are discussed. Details are given of the design and testing of the workshop methodology and the resulting workshop methodology and workbook guide aimed at understanding the stakeholder issues and concerns through stakeholder discussions.

Development of a statistically based access delay timeline methodology.

Energy Technology Data Exchange (ETDEWEB)

Rivera, W. Gary; Robinson, David Gerald; Wyss, Gregory Dane; Hendrickson, Stacey M. Langfitt

2013-02-01

The charter for adversarial delay is to hinder access to critical resources through the use of physical systems increasing an adversarys task time. The traditional method for characterizing access delay has been a simple model focused on accumulating times required to complete each task with little regard to uncertainty, complexity, or decreased efficiency associated with multiple sequential tasks or stress. The delay associated with any given barrier or path is further discounted to worst-case, and often unrealistic, times based on a high-level adversary, resulting in a highly conservative calculation of total delay. This leads to delay systems that require significant funding and personnel resources in order to defend against the assumed threat, which for many sites and applications becomes cost prohibitive. A new methodology has been developed that considers the uncertainties inherent in the problem to develop a realistic timeline distribution for a given adversary path. This new methodology incorporates advanced Bayesian statistical theory and methodologies, taking into account small sample size, expert judgment, human factors and threat uncertainty. The result is an algorithm that can calculate a probability distribution function of delay times directly related to system risk. Through further analysis, the access delay analyst or end user can use the results in making informed decisions while weighing benefits against risks, ultimately resulting in greater system effectiveness with lower cost.

The development of a checklist to enhance methodological quality in intervention programs

Directory of Open Access Journals (Sweden)

Salvador Chacón-Moscoso

2016-11-01

Full Text Available The methodological quality of primary studies is an important issue when performing meta-analyses or systematic reviews. Nevertheless, there are no clear criteria for how methodological quality should be analyzed. Controversies emerge when considering the various theoretical and empirical definitions, especially in relation to three interrelated problems: the lack of representativeness, utility, and feasibility. In this article, we (a systematize and summarize the available literature about methodological quality in primary studies; (b propose a specific, parsimonious, 12-item checklist to empirically define the methodological quality of primary studies based on a content validity study; and (c present an inter-coder reliability study for the resulting 12 items. This paper provides a precise and rigorous description of the development of this checklist, highlighting the clearly specified criteria for the inclusion of items and a substantial inter-coder agreement in the different items. Rather than simply proposing another checklist, however, it then argues that the list constitutes an assessment tool with respect to the representativeness, utility, and feasibility of the most frequent methodological quality items in the literature, one that provides practitioners and researchers with clear criteria for choosing items that may be adequate to their needs. We propose individual methodological features as indicators of quality, arguing that these need to be taken into account when designing, implementing, or evaluating an intervention program. This enhances methodological quality of intervention programs and fosters the cumulative knowledge based on meta-analyses of these interventions. Future development of the checklist is discussed.

Development of derived limits for radiological protection against ionizing radiation based on ICRP-60 recommendations

International Nuclear Information System (INIS)

Jang, S. Y.; Lee, B. S.

1999-01-01

Derived limits such as the Annual Limit on Intake (ALI), Derived Air Concentration (DAC) and Effluent Concentration Limit (ECL) for radiological protection against ionizing radiation based on ICRP-60 recommendations were calculated using dose limits and committed effective dose coefficients of the basic Safety Standards of IAEA (i.e. safety series 115; BSS-96). Derived limits regarding occupational exposure were derived using methodologies of ICRP-61 and dose limit stated in ICRP -60. ECL in air and water for the control of radioactive discharge into the environment were derived using methodologies of 10 CFR part 20 and dose limit stated in ICRP-60. In order to analyze the impact of implementing derived limits on nuclear facilities, the derived values in this study were compared with those prescribed in 10 CFR part 20 as well as the Maximum Permissible Concentrations (MPC) of Notice No. 98-12 of the Ministry of Science and Technology (MOST). According to the comparison results, ECLs in air and water for the control of radioactive discharge into the environment in this study are shown to have lower values (i.e. more conservative), for most part, than those in Notice No. 98-12. These differences are due to the reduction of dose limit, adoption of a weighting factor for age-dependency in dose coefficients, and application of new respiratory tract model and bio-kinetics model. Especially, for uranium elements (i.e., 235 U, 238 U, etc.), which are governing ones in the nuclear fuel industries, ECLs in water are approximately a magnitude in the order of two lower than those in Notice No. 98-12. These are attributable to the adoption of a weighting factor for age-dependency in dose coefficients, newly recommended dose coefficients for ingestion pathway, and reduction of dose limit. It was found out that the differences in ECLs in water for uranium elements originated mostly from ingestion dose coefficients recommended by BSS-96. (author). 6 refs., 2 tabs., 5 figs

Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society on the Recommended Amount of Sleep for a Healthy Adult: Methodology and Discussion

OpenAIRE

Watson, Nathaniel F.; Badr, M. Safwan; Belenky, Gregory; Bliwise, Donald L.; Buxton, Orfeu M.; Buysse, Daniel; Dinges, David F.; Gangwisch, James; Grandner, Michael A.; Kushida, Clete; Malhotra, Raman K.; Martin, Jennifer L.; Patel, Sanjay R.; Quan, Stuart F.; Tasali, Esra

2015-01-01

The American Academy of Sleep Medicine and Sleep Research Society recently released a Consensus Statement regarding the recommended amount of sleep to promote optimal health in adults. This paper describes the methodology, background literature, voting process, and voting results for the consensus statement. In addition, we address important assumptions and challenges encountered during the consensus process. Finally, we outline future directions that will advance our understanding of sleep n...

Development of a methodology for radionuclide impurity analysis in radiopharmaceuticals using gamma spectrometry; Desenvolvimento de uma metodologia para analise de impurezas radionuclidicas em radiofarmacos por espectrometria gama

Energy Technology Data Exchange (ETDEWEB)

Paula, Eduardo Bonfim de; Araujo, Miriam Taina Ferreira de; Delgado, Jose Ubiratan; Poledna, Roberto; Lins, Ronaldo; Leiras, Anderson; Silva, Carlos Jose da; Oliveira, Antonio Eduardo de, E-mail: bonfim@bolsista.ird.gov.br, E-mail: miriamtaina@hotmail.com [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2016-07-01

The LNMRI has sought to develop a methodology for the identification and accurate detection of gamma radiation impurities stations in metrological level, aiming to meet the recommendations not only of international pharmacopoeia, as well as the CNEN and ANVISA regarding the quality control can ensure patients the doses received by the practices are as low as feasible. As an initial target, it was possible to obtain an efficiency curve with uncertainty around 1% necessary to initiate future measurements of interest applied to nuclear medicine and to start the development of impurities analysis technique. (author)

Methodology for Developing the REScheckTM Software through Version 4.2

Energy Technology Data Exchange (ETDEWEB)

Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Connell, Linda M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gowri, Krishnan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lucas, R. G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schultz, Robert W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wiberg, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2009-08-01

This report explains the methodology used to develop Version 4.2 of the REScheck software developed for the 1992, 1993, and 1995 editions of the MEC, and the 1998, 2000, 2003, and 2006 editions of the IECC, and the 2006 edition of the International Residential Code (IRC). Although some requirements contained in these codes have changed, the methodology used to develop the REScheck software for these five editions is similar. REScheck assists builders in meeting the most complicated part of the code-the building envelope Uo-, U-, and R-value requirements in Section 502 of the code. This document details the calculations and assumptions underlying the treatment of the code requirements in REScheck, with a major emphasis on the building envelope requirements.

Development of a methodology for conducting an integrated HRA/PRA --

International Nuclear Information System (INIS)

Luckas, W.J.; Barriere, M.T.; Brown, W.S.; Wreathall, J.; Cooper, S.E.

1993-01-01

During Low Power and Shutdown (LP ampersand S) conditions in a nuclear power plant (i.e., when the reactor is subcritical or at less than 10--15% power), human interactions with the plant's systems will be more frequent and more direct. Control is typically not mediated by automation, and there are fewer protective systems available. Therefore, an assessment of LP ampersand S related risk should include a greater emphasis on human reliability than such an assessment made for power operation conditions. In order to properly account for the increase in human interaction and thus be able to perform a probabilistic risk assessment (PRA) applicable to operations during LP ampersand S, it is important that a comprehensive human reliability assessment (HRA) methodology be developed and integrated into the LP ampersand S PRA. The tasks comprising the comprehensive HRA methodology development are as follows: (1) identification of the human reliability related influences and associated human actions during LP ampersand S, (2) identification of potentially important LP ampersand S related human actions and appropriate HRA framework and quantification methods, and (3) incorporation and coordination of methodology development with other integrated PRA/HRA efforts. This paper describes the first task, i.e., the assessment of human reliability influences and any associated human actions during LP ampersand S conditions for a pressurized water reactor (PWR)

METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (theoretical and methodological foundations of vocational teacher education

Directory of Open Access Journals (Sweden)

Evgeny M. Dorozhkin

2014-01-01

methodology taking into consideration the target orientation, principles and approaches to the organization and its’ methods of scientific and educational activities implementation. The qualification structure formation of the teachers’ vocational training and providing advance principles of education are considered to be the most important conditions for the development of vocational teacher education. Scientific novelty. The research demonstrates creating the project of further vocational teacher education development in the post-industrial society. The pedagogical innovations transforming research findings into educational practice are considered to be the main tool of integration methodology means. Practical significance. The research findings highlight the proposed reforms for further teachers training system development of vocational institutes, which are in need of drastic restructuring. In the final part of the article the authors recommend some specific issues that can be discussed at the methodological workshop. 

THE DECISION TO RECOMMEND YUCCA MOUNTAIN AND THE NEXT STEPS TOWARD LICENSED REPOSITORY DEVELOPMENT

International Nuclear Information System (INIS)

Barrett, L. H.

2002-01-01

After more than 20 years of carefully planned and reviewed scientific field work by the U.S. Department of Energy, the U.S. Geological Survey, and numerous other organizations, Secretary of Energy Abraham concluded in January that the Yucca Mountain site is suitable, within the meaning of the Nuclear Waste Policy Act, for development as a permanent nuclear waste and spent fuel repository. In February, the Secretary recommended to the President that the site be developed for licensed disposal of these wastes, and the President transmitted this recommendation to Congress. This paper summarizes key technical and national interest considerations that provided the basis for the recommendation. It also discusses the program's near-term plans for repository development if Congress designates the site

Load shape development for Swedish commercial and public buildings - methodologies and results

Energy Technology Data Exchange (ETDEWEB)

Noren, C.

1999-06-01

The knowledge concerning electricity consumption, and especially load demand, in Swedish commercial buildings is very limited. The current study deals with methods for electricity consumption indicator development and application of the different methodologies on measured data. Typical load shapes and consumption indicators are developed for four different types of commercial buildings: schools, hotels, grocery stores and department stores. Two different methodologies for consumption indicator development are presented and discussed. The influence on load demand from different factors such as, installations, outdoor temperature and building activities is studied. It is suggested that building floor area is not an accurate determinant of building electricity consumption and it is necessary to consider other factors as those just mentioned to understand commercial building electricity consumption. The application of the two methodologies on measured data shows that typical load shapes can be developed with reasonable accuracy. For most of the categories it is possible to use the typical load shapes for approximation of whole-building load shapes with error rates about 10-25% depending on day-type and building type. Comparisons of the developed load shapes with measured data show good agreement 49 refs, 22 figs, 3 tabs

Development Risk Methodology for Whole Systems Trade Analysis

Science.gov (United States)

2016-08-01

WSTAT). In the early stages of the V&V for development risk, it was discovered that the original risk rating and methodology did not actually...4932 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 ii THIS PAGE INTENTIONALLY LEFT ...WSTA has opened trade space exploration by allowing the tool to evaluate trillions of potential system configurations to then return a handful of

Development of methodology for separation and recovery of uranium from nuclear wastewater

International Nuclear Information System (INIS)

Satpati, S.K.; Roy, S.B.; Pal, Sangita; Tewari, P.K.

2015-01-01

Uranium plays a key role in nuclear power supply, demand of which is growing up with time because of its prospective features. Persistent increase in different nuclear activities leads to increase generation of nuclear wastewater containing uranium. Separation and recovery of the uranium from its unconventional source like nuclear wastewater is worth to explore for addressing the reutilisation of the uranium source. It is also necessary to improve remediation technology of nuclear industries for environmental protection. Development of a suitable process methodology is essential for the purpose to supersede the conventional methodology. In the article, recent developments in several possible methodologies for separation of uranium from dilute solution have been discussed with their merits and demerits. Sorption technique as solid phase extraction methodology has been chosen with suitable polymer matrix and functional moiety based on wastewater characteristics. Polyhydroxamic Acid, PHOA sorbent synthesized following eco-friendly procedure is a promising polymeric chelating sorbents for remediation of nuclear wastewaters and recovery of uranium. Sorption and elution characteristics of the PHOA have been evaluated and illustrated for separation and recovery of uranium from a sample nuclear wastewater. For the remediation of nuclear wastewater SPE technique applying the PHOA, a polymeric sorbent is found to be a potentially suitable methodology. (author)

Air pollution monitoring - a methodological approach

International Nuclear Information System (INIS)

Trajkovska Trpevska, Magdalena

2002-01-01

Methodology for monitoring the emission of polluters in the air is a complex concept that in general embraces following fazes: sampling, laboratory treatment, and interpretation of results. In Company for technological and laboratory investigation and environmental protection - Mining Institute Skopje, the control of emission of polluters in the air is performing according methodology based in general on the recommendation of standard VDI 2.066 prescribe from Ministry of Ecology in Germany, because adequate legislation in our country does not exist. In this article the basic treatment of methodology for the air polluters emission control is presented. (Original)

Developing longitudinal qualitative designs: lessons learned and recommendations for health services research.

Science.gov (United States)

Calman, Lynn; Brunton, Lisa; Molassiotis, Alex

2013-02-06

Longitudinal qualitative methods are becoming increasingly used in the health service research, but the method and challenges particular to health care settings are not well described in the literature.We reflect on the strategies used in a longitudinal qualitative study to explore the experience of symptoms in cancer patients and their carers, following participants from diagnosis for twelve months; we highlight ethical, practical, theoretical and methodological issues that need to be considered and addressed from the outset of a longitudinal qualitative study. Key considerations in undertaking longitudinal qualitative projects in health research, include the use of theory, utilizing multiple methods of analysis and giving consideration to the practical and ethical issues at an early stage. These can include issues of time and timing; data collection processes; changing the topic guide over time; recruitment considerations; retention of staff; issues around confidentiality; effects of project on staff and patients, and analyzing data within and across time. As longitudinal qualitative methods are becoming increasingly used in health services research, the methodological and practical challenges particular to health care settings need more robust approaches and conceptual improvement. We provide recommendations for the use of such designs. We have a particular focus on cancer patients, so this paper will have particular relevance for researchers interested in chronic and life limiting conditions.

Designing a Self-Management App for Young People With Type 1 Diabetes: Methodological Challenges, Experiences, and Recommendations.

Science.gov (United States)

Castensøe-Seidenfaden, Pernille; Reventlov Husted, Gitte; Teilmann, Grete; Hommel, Eva; Olsen, Birthe Susanne; Kensing, Finn

2017-10-23

Young people with type 1 diabetes often struggle to self-manage their disease. Mobile health (mHealth) apps show promise in supporting self-management of chronic conditions such as type 1 diabetes. Many health care providers become involved in app development. Unfortunately, limited information is available to guide their selection of appropriate methods, techniques, and tools for a participatory design (PD) project in health care. The aim of our study was to develop an mHealth app to support young people in self-managing type 1 diabetes. This paper presents our methodological recommendations based on experiences and reflections from a 2-year research study. A mixed methods design was used to identify user needs before designing the app and testing it in a randomized controlled trial. App design was based on qualitative, explorative, interventional, and experimental activities within an overall iterative PD approach. Several techniques and tools were used, including workshops, a mail panel, think-aloud tests, and a feasibility study. The final mHealth solution was "Young with Diabetes" (YWD). The iterative PD approach supported researchers and designers in understanding the needs of end users (ie, young people, parents, and health care providers) and their assessment of YWD, as well as how to improve app usability and feasibility. It is critical to include all end user groups during all phases of a PD project and to establish a multidisciplinary team to provide the wide range of expertise required to build a usable and useful mHealth app. Future research is needed to develop and evaluate more efficient PD techniques. Health care providers need guidance on what tools and techniques to choose for which subgroups of users and guidance on how to introduce an app to colleagues to successfully implement an mHealth app in health care organizations. These steps are important for anyone who wants to design an mHealth app for any illness. ©Pernille Castens

Developing Foucault's Discourse Analytic Methodology

Directory of Open Access Journals (Sweden)

Rainer Diaz-Bone

2006-01-01

Full Text Available A methodological position for a FOUCAULTian discourse analysis is presented. A sequence of analytical steps is introduced and an illustrating example is offered. It is emphasized that discourse analysis has to discover the system-level of discursive rules and the deeper structure of the discursive formation. Otherwise the analysis will be unfinished. Michel FOUCAULTs work is theoretically grounded in French structuralism and (the so called post-structuralism. In this paper, post-structuralism is not conceived as a means for overcoming of structuralism, but as a way of critically continuing the structural perspective. In this way, discursive structures can be related to discursive practices and the concept of structure can be disclosed (e. g. to inter-discourse or DERRIDAs concept of structurality. In this way, the structural methodology is continued and radicalized, but not given up. In this paper, FOUCAULTs theory is combined with the works of Michel PÊCHEUX and (especially for the sociology of knowledge and the sociology of culture Pierre BOURDIEU. The practice of discourse analysis is theoretically grounded. This practice can be conceived as a reflexive coupling of deconstruction and reconstruction in the material to be analyzed. This methodology therefore can be characterized as a reconstructive qualitative methodology. At the end of the article, forms of discourse analysis are criticized that do not intend to recover the system level of discursive rules and that do not intend to discover the deeper structure of the discursive formation (i. e. episteme, socio-episteme. These forms merely are commentaries of discourses (not their analyses, they remain phenomenological and are therefore: pre-structuralist. URN: urn:nbn:de:0114-fqs060168

Digital Methodology to implement the ECOUTER engagement process.

Science.gov (United States)

Wilson, Rebecca C; Butters, Oliver W; Clark, Tom; Minion, Joel; Turner, Andrew; Murtagh, Madeleine J

2016-01-01

ECOUTER ( E mploying CO ncept u al schema for policy and T ranslation E  in R esearch - French for 'to listen' - is a new stakeholder engagement method incorporating existing evidence to help participants draw upon their own knowledge of cognate issues and interact on a topic of shared concern. The results of an ECOUTER can form the basis of recommendations for research, governance, practice and/or policy. This paper describes the development of a digital methodology for the ECOUTER engagement process based on currently available mind mapping freeware software. The implementation of an ECOUTER process tailored to applications within health studies are outlined for both online and face-to-face scenarios. Limitations of the present digital methodology are discussed, highlighting the requirement of a purpose built software for ECOUTER research purposes.

Development of the methodology and approaches to validate safety and accident management

International Nuclear Information System (INIS)

Asmolov, V.G.

1997-01-01

The article compares the development of the methodology and approaches to validate the nuclear power plant safety and accident management in Russia and advanced industrial countries. It demonstrates that the development of methods of safety validation is dialectically related to the accumulation of the knowledge base on processes and events during NPP normal operation, transients and emergencies, including severe accidents. The article describes the Russian severe accident research program (1987-1996), the implementation of which allowed Russia to reach the world level of the safety validation efforts, presents future high-priority study areas. Problems related to possible approaches to the methodological accident management development are discussed. (orig.)

Development of Testing Methodologies for the Mechanical Properties of MEMS

Science.gov (United States)

Ekwaro-Osire, Stephen

2003-01-01

This effort is to investigate and design testing strategies to determine the mechanical properties of MicroElectroMechanical Systems (MEMS) as well as investigate the development of a MEMS Probabilistic Design Methodology (PDM). One item of potential interest is the design of a test for the Weibull size effect in pressure membranes. The Weibull size effect is a consequence of a stochastic strength response predicted from the Weibull distribution. Confirming that MEMS strength is controlled by the Weibull distribution will enable the development of a probabilistic design methodology for MEMS - similar to the GRC developed CARES/Life program for bulk ceramics. However, the primary area of investigation will most likely be analysis and modeling of material interfaces for strength as well as developing a strategy to handle stress singularities at sharp corners, filets, and material interfaces. This will be a continuation of the previous years work. The ultimate objective of this effort is to further develop and verify the ability of the Ceramics Analysis and Reliability Evaluation of Structures Life (CARES/Life) code to predict the time-dependent reliability of MEMS structures subjected to multiple transient loads.

A model-based software development methodology for high-end automotive components

NARCIS (Netherlands)

Ravanan, Mahmoud

2014-01-01

This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

Standards, options and recommendations for brachytherapy of prostate cancer: efficacy and toxicity

International Nuclear Information System (INIS)

Pommier, P.; Villers, A.; Bataillard, A.

2001-01-01

Context. - The 'Standards, Options and Recommendations' (SOR) collaborative project was initiated in 1993 by the Federation of the French Cancer Centres (FNCLCC), with the 20 French Regional Cancer Centres, several French public university and general hospitals, as well as private clinics and medical specialty societies. Its main objective is the development of serviceable clinical practice guidelines in order to improve the quality of health care and the outcome of cancer patients. The methodology is based on a literature review, followed by a critical appraisal by a multidisciplinary group of experts. Draft guidelines are produced, then validated by specialists in cancer care delivery. Objectives. - Produce technical practice guidelines for the brachytherapy of prostate cancer using the methodology developed by the Standards, Options and Recommendations project. Methods. - The FNCLCC and the French Urology Association (AFU) first designated the multidisciplinary group of experts. Available data were collected by a search of Medline and lists selected by experts in the group. A first draft of the guidelines was written, they validated by independent reviewers. Results. - The main recommendations are: 1/ Brachytherapy with permanent seeds alone is a possible curative treatment for prostate cancer patients with the following prognosis factors: tumour stage T1 or T2a (TNM 1992), Gleason score ≤ 6 and PSA 7 and/or PSA > 10. 3/ Combination of brachytherapy and external beam radiation therapy can be proposed to prostate cancer patients with intermediate prognosis. 4/ Before and after seed implantation, risks of infection must be prevented by appropriate antibiotic therapy (recommendation). 5/ Brachytherapy must not be performed within 2 months of trans-urethral prostate resection. 6/The height of the urethra receiving more than 200 of the prescribed dose must be reported. The portion of the rectum receiving 100 and 120 % of the prescribed dose must be limited to 10

Development of a design methodology for hydraulic pipelines carrying rectangular capsules

International Nuclear Information System (INIS)

Asim, Taimoor; Mishra, Rakesh; Abushaala, Sufyan; Jain, Anuj

2016-01-01

The scarcity of fossil fuels is affecting the efficiency of established modes of cargo transport within the transportation industry. Efforts have been made to develop innovative modes of transport that can be adopted for economic and environmental friendly operating systems. Solid material, for instance, can be packed in rectangular containers (commonly known as capsules), which can then be transported in different concentrations very effectively using the fluid energy in pipelines. For economical and efficient design of such systems, both the local flow characteristics and the global performance parameters need to be carefully investigated. Published literature is severely limited in establishing the effects of local flow features on system characteristics of Hydraulic Capsule Pipelines (HCPs). The present study focuses on using a well validated Computational Fluid Dynamics (CFD) tool to numerically simulate the solid-liquid mixture flow in both on-shore and off-shore HCPs applications including bends. Discrete Phase Modelling (DPM) has been employed to calculate the velocity of the rectangular capsules. Numerical predictions have been used to develop novel semi-empirical prediction models for pressure drop in HCPs, which have then been embedded into a robust and user-friendly pipeline optimisation methodology based on Least-Cost Principle. - Highlights: • Local flow characteristics in a pipeline transporting rectangular capsules. • Development of prediction models for the pressure drop contribution of capsules. • Methodology developed for sizing of Hydraulic Capsule Pipelines. • Implementation of the developed methodology to obtain optimal pipeline diameter.

Embracing Agile methodology during DevOps Developer Internship Program

OpenAIRE

Patwardhan, Amol; Kidd, Jon; Urena, Tiffany; Rajgopalan, Aishwarya

2016-01-01

The DevOps team adopted agile methodologies during the summer internship program as an initiative to move away from waterfall. The DevOps team implemented the Scrum software development strategy to create an internal data dictionary web application. This article reports on the transition process and lessons learned from the pilot program.

From theory to 'measurement' in complex interventions: Methodological lessons from the development of an e-health normalisation instrument

Directory of Open Access Journals (Sweden)

Finch Tracy L

2012-05-01

Full Text Available Abstract Background Although empirical and theoretical understanding of processes of implementation in health care is advancing, translation of theory into structured measures that capture the complex interplay between interventions, individuals and context remain limited. This paper aimed to (1 describe the process and outcome of a project to develop a theory-based instrument for measuring implementation processes relating to e-health interventions; and (2 identify key issues and methodological challenges for advancing work in this field. Methods A 30-item instrument (Technology Adoption Readiness Scale (TARS for measuring normalisation processes in the context of e-health service interventions was developed on the basis on Normalization Process Theory (NPT. NPT focuses on how new practices become routinely embedded within social contexts. The instrument was pre-tested in two health care settings in which e-health (electronic facilitation of healthcare decision-making and practice was used by health care professionals. Results The developed instrument was pre-tested in two professional samples (N = 46; N = 231. Ratings of items representing normalisation ‘processes’ were significantly related to staff members’ perceptions of whether or not e-health had become ‘routine’. Key methodological challenges are discussed in relation to: translating multi-component theoretical constructs into simple questions; developing and choosing appropriate outcome measures; conducting multiple-stakeholder assessments; instrument and question framing; and more general issues for instrument development in practice contexts. Conclusions To develop theory-derived measures of implementation process for progressing research in this field, four key recommendations are made relating to (1 greater attention to underlying theoretical assumptions and extent of translation work required; (2 the need for appropriate but flexible approaches to outcomes

From theory to 'measurement' in complex interventions: methodological lessons from the development of an e-health normalisation instrument.

Science.gov (United States)

Finch, Tracy L; Mair, Frances S; O'Donnell, Catherine; Murray, Elizabeth; May, Carl R

2012-05-17

Although empirical and theoretical understanding of processes of implementation in health care is advancing, translation of theory into structured measures that capture the complex interplay between interventions, individuals and context remain limited. This paper aimed to (1) describe the process and outcome of a project to develop a theory-based instrument for measuring implementation processes relating to e-health interventions; and (2) identify key issues and methodological challenges for advancing work in this field. A 30-item instrument (Technology Adoption Readiness Scale (TARS)) for measuring normalisation processes in the context of e-health service interventions was developed on the basis on Normalization Process Theory (NPT). NPT focuses on how new practices become routinely embedded within social contexts. The instrument was pre-tested in two health care settings in which e-health (electronic facilitation of healthcare decision-making and practice) was used by health care professionals. The developed instrument was pre-tested in two professional samples (N=46; N=231). Ratings of items representing normalisation 'processes' were significantly related to staff members' perceptions of whether or not e-health had become 'routine'. Key methodological challenges are discussed in relation to: translating multi-component theoretical constructs into simple questions; developing and choosing appropriate outcome measures; conducting multiple-stakeholder assessments; instrument and question framing; and more general issues for instrument development in practice contexts. To develop theory-derived measures of implementation process for progressing research in this field, four key recommendations are made relating to (1) greater attention to underlying theoretical assumptions and extent of translation work required; (2) the need for appropriate but flexible approaches to outcomes measurement; (3) representation of multiple perspectives and collaborative nature of

Automated Methodologies for the Design of Flow Diagrams for Development and Maintenance Activities

Science.gov (United States)

Shivanand M., Handigund; Shweta, Bhat

The Software Requirements Specification (SRS) of the organization is a text document prepared by strategic management incorporating the requirements of the organization. These requirements of ongoing business/ project development process involve the software tools, the hardware devices, the manual procedures, the application programs and the communication commands. These components are appropriately ordered for achieving the mission of the concerned process both in the project development and the ongoing business processes, in different flow diagrams viz. activity chart, workflow diagram, activity diagram, component diagram and deployment diagram. This paper proposes two generic, automatic methodologies for the design of various flow diagrams of (i) project development activities, (ii) ongoing business process. The methodologies also resolve the ensuing deadlocks in the flow diagrams and determine the critical paths for the activity chart. Though both methodologies are independent, each complements other in authenticating its correctness and completeness.

Development of an Automated Security Risk Assessment Methodology Tool for Critical Infrastructures.

Energy Technology Data Exchange (ETDEWEB)

Jaeger, Calvin Dell; Roehrig, Nathaniel S.; Torres, Teresa M.

2008-12-01

This document presents the security automated Risk Assessment Methodology (RAM) prototype tool developed by Sandia National Laboratories (SNL). This work leverages SNL's capabilities and skills in security risk analysis and the development of vulnerability assessment/risk assessment methodologies to develop an automated prototype security RAM tool for critical infrastructures (RAM-CITM). The prototype automated RAM tool provides a user-friendly, systematic, and comprehensive risk-based tool to assist CI sector and security professionals in assessing and managing security risk from malevolent threats. The current tool is structured on the basic RAM framework developed by SNL. It is envisioned that this prototype tool will be adapted to meet the requirements of different CI sectors and thereby provide additional capabilities.

Ubiquitous Multicriteria Clinic Recommendation System.

Science.gov (United States)

Chen, Toly

2016-05-01

Advancements in information, communication, and sensor technologies have led to new opportunities in medical care and education. Patients in general prefer visiting the nearest clinic, attempt to avoid waiting for treatment, and have unequal preferences for different clinics and doctors. Therefore, to enable patients to compare multiple clinics, this study proposes a ubiquitous multicriteria clinic recommendation system. In this system, patients can send requests through their cell phones to the system server to obtain a clinic recommendation. Once the patient sends this information to the system, the system server first estimates the patient's speed according to the detection results of a global positioning system. It then applies a fuzzy integer nonlinear programming-ordered weighted average approach to assess four criteria and finally recommends a clinic with maximal utility to the patient. The proposed methodology was tested in a field experiment, and the experimental results showed that it is advantageous over two existing methods in elevating the utilities of recommendations. In addition, such an advantage was shown to be statistically significant.

Calculating the cost of research and Development in nuclear and radiation safety

International Nuclear Information System (INIS)

Matsulevich, N.Je.; Nosovs'ka, A.A.

2010-01-01

Methodological support assessing the cost of research and development in the area of nuclear and radiation safety regulation is considered. Basic methodological recommendations for determining labor expenditures for research and development in nuclear and radiation safety are provided.

Recommendations for the development of high temperature reactors (HTRs)

International Nuclear Information System (INIS)

Bastien, D.; Chevalier, A.; Haverkate, B.R.W.; Hittner, D.; Magill, J.; Proto, G.; Reutler, H.; Taylor, N.; Lensa, W. von

2001-01-01

The Concerted Action ''Assessment of safety and innovative technology for an HTR power generating plant (INNOHTR)'' is funded by the European Commission within its 4th RTD Framework Programme. It is a joint project of four European nuclear industry organisations and five European research centres. This paper presents the preliminary conclusions of the INNOHTR Concerted Action. It addresses existing experience in designing, building, and operating HTRs in the areas of fuel, reactor core, and plant systems. It also addresses the need for additional research and development to support forthcoming industrial prototypes as well as for long term advanced system development. Specific areas of development are recommended along with the need for international cooperation. (author)

Methodology for substantiation of the fast reactor fuel element serviceability

International Nuclear Information System (INIS)

Tsykanov, V.A.; Maershin, A.A.

1988-01-01

Methodological aspects of fast reactor fuel element serviceability substantiation are presented. The choice of the experimental program and strategies of its realization to solve the problem set in short time, taking into account available experimental means, are substantiated. Factors determining fuel element serviceability depending on parameters and operational conditions are considered. The methodological approach recommending separate studing of the factors, which points to the possibility of data acquisition, required for the development of calculational models and substantiation of fuel element serviceability in pilot and experimental reactors, is described. It is shown that the special-purpose data are more useful for the substantiation of fuel element serviceability and analytical method development than unsubstantial and expensive complex tests of fuel elements and fuel assemblies, which should be conducted only at final stages for the improvement of the structure on the whole

Education in Environmental Chemistry: Setting the Agenda and Recommending Action. A Workshop Report Summary

Science.gov (United States)

Zoller, Uri

2005-08-01

Worldwide, the essence of the current reform in science education is a paradigm shift from algorithmic, lower-order cognitive skills (LOCS) teaching to higher-order cognitive skills (HOCS) learning. In the context of education in environmental chemistry (EEC), the ultimate goal is to educate students to be science technology environment society (STES)-literate, capable of evaluative thinking, decision making, problem solving and taking responsible action accordingly. Educators need to translate this goal into effective courses that can be implemented: this includes developing teaching strategies and assessment methodologies that are consonant with the goal of HOCS learning. An international workshop—"Environmental Chemistry Education in Europe: Setting the Agenda"—yielded two main recommendations for those undertaking educational reform in science education, particularly to promote meaningful EEC. The first recommendation concerns integration of environmental sciences into core chemistry courses as well as the development and implementation of HOCS-promoting teaching strategies and assessment methodologies in chemical education. The second emphasizes the development of students' HOCS for transfer, followed by performance assessment of HOCS. This requires changing the way environmental chemistry is typically taught, moving from a narrowly focused approach (applied analytical, ecotoxicological, or environmental engineering chemistry) to an interdisciplinary and multidisciplinary approach.

Recommendations for the determination of absorbed doses in curietherapy. CFMRI no. 1 report

International Nuclear Information System (INIS)

1983-01-01

The aim of the Comite Francais ''mesure des Rayonnements ionisants'' (C.F.M.R.I.) is to prepare recommendations dealing with: numerical values of constant data or radiometrological parameters, methodology of measurement, etc... These recommendations are complementary to recommendations of international organizations such as International commission radiation units (ICRU) [fr

Identifying Gender-Sensitive Agroforestry Options: Methodological Considerations From the Field

Directory of Open Access Journals (Sweden)

Sarah-Lan Mathez-Stiefel

2016-11-01

Full Text Available Agroforestry is seen as a promising set of land use practices that can lead to increased ecological integrity and sustainable benefits in mountain areas. Agroforestry practices can also enhance smallholder farmers' resilience in the face of social and ecological change. There is a need for critical examination of existing practices to ensure that agroforestry recommendations for smallholder farmers are socially inclusive and grounded in local experience, knowledge, and perceptions. In this paper, we present a transdisciplinary systems approach to the identification and analysis of suitable agroforestry options, which takes into account gendered perceptions of the benefits and values of natural resources. The 4-step approach consists of an appraisal of local perceptions of the social-ecological context and dynamics, an inventory of existing agroforestry practices and species, a gendered valuation of agroforestry practices and species, and the development of locally adapted and gender-sensitive agroforestry options. In a study using this approach in the Peruvian Andes, data were collected through a combination of participatory tools for gender research and ethnobotanical methods. This paper shares lessons learned and offers recommendations for researchers and practitioners in the field of sustainable mountain development. We discuss methodological considerations in the identification of locally adapted agroforestry options, the understanding of local social-ecological systems, the facilitation of social learning processes, engagement in gender research, and the establishment of ethical research collaborations. The methodology presented here is especially recommended for the exploratory phase of any natural resource management initiative in mountain areas with high environmental and sociocultural variability.

Development of a Seismic Setpoint Calculation Methodology Using a Safety System Approach

International Nuclear Information System (INIS)

Lee, Chang Jae; Baik, Kwang Il; Lee, Sang Jeong

2013-01-01

The Automatic Seismic Trip System (ASTS) automatically actuates reactor trip when it detects seismic activities whose magnitudes are comparable to a Safe Shutdown Earthquake (SSE), which is the maximum hypothetical earthquake at the nuclear power plant site. To ensure that the reactor is tripped before the magnitude of earthquake exceeds the SSE, it is crucial to reasonably determine the seismic setpoint. The trip setpoint and allowable value for the ASTS for Advanced Power Reactor (APR) 1400 Nuclear Power Plants (NPPs) were determined by the methodology presented in this paper. The ASTS that trips the reactor when a large earthquake occurs is categorized as a non safety system because the system is not required by design basis event criteria. This means ASTS has neither specific analytical limit nor dedicated setpoint calculation methodology. Therefore, we developed the ASTS setpoint calculation methodology by conservatively considering that of PPS. By incorporating the developed methodology into the ASTS for APR1400, the more conservative trip setpoint and allowable value were determined. In addition, the ZPA from the Operating Basis Earthquake (OBE) FRS of the floor where the sensor module is located is 0.1g. Thus, the allowance of 0.17g between OBE of 0.1 g and ASTS trip setpoint of 0.27 g is sufficient to prevent the reactor trip before the magnitude of the earthquake exceeds the OBE. In result, the developed ASTS setpoint calculation methodology is evaluated as reasonable in both aspects of the safety and performance of the NPPs. This will be used to determine the ASTS trip setpoint and allowable for newly constructed plants

Archetype modeling methodology.

Science.gov (United States)

Moner, David; Maldonado, José Alberto; Robles, Montserrat

2018-03-01

Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

Development of 3D pseudo pin-by-pin calculation methodology in ANC

International Nuclear Information System (INIS)

Zhang, B.; Mayhue, L.; Huria, H.; Ivanov, B.

2012-01-01

Advanced cores and fuel assembly designs have been developed to improve operational flexibility, economic performance and further enhance safety features of nuclear power plants. The simulation of these new designs, along with strong heterogeneous fuel loading, have brought new challenges to the reactor physics methodologies currently employed in the industrial codes for core analyses. Control rod insertion during normal operation is one operational feature in the AP1000 R plant of Westinghouse next generation Pressurized Water Reactor (PWR) design. This design improves its operational flexibility and efficiency but significantly challenges the conventional reactor physics methods, especially in pin power calculations. The mixture loading of fuel assemblies with significant neutron spectrums causes a strong interaction between different fuel assembly types that is not fully captured with the current core design codes. To overcome the weaknesses of the conventional methods, Westinghouse has developed a state-of-the-art 3D Pin-by-Pin Calculation Methodology (P3C) and successfully implemented in the Westinghouse core design code ANC. The new methodology has been qualified and licensed for pin power prediction. The 3D P3C methodology along with its application and validation will be discussed in the paper. (authors)

Research Methodology in Global Strategy Research

DEFF Research Database (Denmark)

Cuervo-Cazurra, Alvaro; Mudambi, Ram; Pedersen, Torben

2017-01-01

We review advances in research methodology used in global strategy research and provide suggestions on how researchers can improve their analyses and arguments. Methodological advances in the extraction of information, such as computer-aided text analysis, and in the analysis of datasets......, such as differences-in-differences and propensity score matching, have helped deal with challenges (e.g., endogeneity and causality) that bedeviled earlier studies and resulted in conflicting findings. These methodological advances need to be considered as tools that complement theoretical arguments and well......-explained logics and mechanisms so that researchers can provide better and more relevant recommendations to managers designing the global strategies of their organizations....

Methodology for combining dynamic responses. Technical report

International Nuclear Information System (INIS)

Mattu, R.K.

1980-05-01

Procedures in accordance with Appendix A of 10 CFR 50, GDC 2, call for an appropriate combination of the effects of the accident loads and loads caused by natural phenomena (such as earthquakes) to be reflected in the design bases of safety equipment. This requirement of interaction of loads has been implemented in various ways both within the NRC and the Nuclear Industry. An NRR Working Group constituted to examine load combination methodologies developed recommendations which were published in September 1978 as NUREG-0484, (PB-287 432). Revision 1 of NUREG-0484 extends the conclusions of the original NUREG-0484 on the use of SRSS methodology for the combination of SSE and LOCA responses beyond RCPB to any other ASME Section III, Class 1, 2, or 3 affected system, component or support, and provides criteria for the combination of dynamic responses other than SSE and LOCA

Women's experiences of developing musculoskeletal diseases: employment challenges and policy recommendations.

Science.gov (United States)

Crooks, Valorie A

2007-07-30

To answer three specific questions: (i) How do women experience the workplace after the onset of a musculoskeletal disease; (ii) What employment policy and programme suggestions can they offer for ways to better support chronically ill women in their abilities to maintain workforce participation; and (iii) How are these women's employment policy and programme recommendations informed by their own lived experiences and desires? In-depth interviews were conducted with 18 women who had developed musculoskeletal diseases while involved in the labour market. Data were coded and analysed thematically. Participants identified three common workplace barriers experienced and three types of workplace accommodations commonly requested. They offered four specific employment policy and programme recommendations for ways to better support women who develop musculoskeletal diseases in maintaining labour market participation. It is found that their employment policy and programme recommendations are informed by their own experiences in the workplace and desires for being supported in maintaining involvement in paid labour. Creating employment programmes and policies that support chronically ill women in their attempts to remain involved in the workforce based on how much paid labour they are able to perform and where they are best able to work is of the utmost importance.

Summarizing systematic reviews: methodological development, conduct and reporting of an umbrella review approach.

Science.gov (United States)

Aromataris, Edoardo; Fernandez, Ritin; Godfrey, Christina M; Holly, Cheryl; Khalil, Hanan; Tungpunkom, Patraporn

2015-09-01

With the increase in the number of systematic reviews available, a logical next step to provide decision makers in healthcare with the evidence they require has been the conduct of reviews of existing systematic reviews. Syntheses of existing systematic reviews are referred to by many different names, one of which is an umbrella review. An umbrella review allows the findings of reviews relevant to a review question to be compared and contrasted. An umbrella review's most characteristic feature is that this type of evidence synthesis only considers for inclusion the highest level of evidence, namely other systematic reviews and meta-analyses. A methodology working group was formed by the Joanna Briggs Institute to develop methodological guidance for the conduct of an umbrella review, including diverse types of evidence, both quantitative and qualitative. The aim of this study is to describe the development and guidance for the conduct of an umbrella review. Discussion and testing of the elements of methods for the conduct of an umbrella review were held over a 6-month period by members of a methodology working group. The working group comprised six participants who corresponded via teleconference, e-mail and face-to-face meeting during this development period. In October 2013, the methodology was presented in a workshop at the Joanna Briggs Institute Convention. Workshop participants, review authors and methodologists provided further testing, critique and feedback on the proposed methodology. This study describes the methodology and methods developed for the conduct of an umbrella review that includes published systematic reviews and meta-analyses as the analytical unit of the review. Details are provided regarding the essential elements of an umbrella review, including presentation of the review question in a Population, Intervention, Comparator, Outcome format, nuances of the inclusion criteria and search strategy. A critical appraisal tool with 10 questions to

Development of a Recommender System based on Personal History

Science.gov (United States)

Tanaka, Katsuaki; Hori, Koichi; Yamamoto, Masato

The flood of information on the Internet makes a person who surf it without some strong intention strayed into it. One of the ways to control the balance between a person and the flood is a recommender system by computer, and many web sites use it. These systems work on a web site for the same kind of items. However the field of personal activity is not limited to handle the same kind of thing and a web site, but also offline area in the real world. To handle personal offline activities, LifeLog is proposed as method to record it, but the main purpose of LifeLog is recording a personal history. How to use a history has still been studied stage. The authors have developed a recommender system that captures personal context from history of personal online and offline activities, treats information on web sites as a large set of context, and finds out and extends overlap of them, then recommends information located there. The aim of the system is that a person can enjoy waves of information again. The system worked as a part of My-life Assist Service. It was a service for mobile phones provided by NTT DoCoMo, Inc. as a field experiment from Dec. 2007 to Feb. 2008.

Development Mode and Recommendations for Industrialization of Tropical Agricultural Science and Technology

OpenAIRE

QIU, Meihuan; LIN, Minxia; ZHANG, Xiaodong; ZHANG, Hongyi; WANG, Zhunian

2014-01-01

Industrialization of tropical agricultural science and technology is an essential part of tropical agricultural technological innovation. This paper firstly analyzed development mode of industrialization of tropical agricultural science and technology in Chin and then came up with recommendations for developing industrialization of tropical agricultural science and technology.

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users.

Science.gov (United States)

Ravi, Logesh; Vairavasundaram, Subramaniyaswamy

2016-01-01

Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW) and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented.

Status of Methodology Development for the Evaluation of Proliferation Resistance

International Nuclear Information System (INIS)

Lee, Yong Deok; Ko, Won Il; Lee, Jung Won

2010-01-01

Concerning the increasing energy demand and green house effect, nuclear energy is now the most feasible option. Therefore, recently, oil countries even have a plan to build the nuclear power plant for energy production. If nuclear systems are to make a major and sustainable contribution to the worlds energy supply, future nuclear energy systems must meet specific requirements. One of the requirements is to satisfy the proliferation resistance condition in an entire nuclear system. Therefore, from the beginning of future nuclear energy system development, it is important to consider a proliferation resistance to prevent the diversion of nuclear materials. The misuse of a nuclear system must be considered as well. Moreover, in the import and export of nuclear system, the evaluation of the proliferation resistance on the nuclear system becomes a key factor The INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) program initiated by the IAEA proposed proliferation resistance (PR) as a key component of a future innovative nuclear system (INS) with a sustainability, economics, safety of nuclear installation and waste management. The technical goal for Generation IV (Gen IV) nuclear energy systems (NESs) highlights a Proliferation Resistance and Physical Protection (PR and PP), sustainability, safety, reliability and economics as well. Based on INPRO and Gen IV study, the methodology development for the evaluation of proliferation resistance has been carried out in KAERI. Finally, the systematic procedure for methodology was setup and the indicators for the procedure were decided. The methodology involves the evaluation from total nuclear system to individual process. Therefore, in this study, the detailed procedure for the evaluation of proliferation resistance and the newly proposed additional indicators are described and several conditions are proposed to increase the proliferation resistance in the future nuclear system. The assessment of PR

METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (THEORETICAL AND METHODOLOGICAL FOUNDATIONS OF VOCATIONAL TEACHER EDUCATION

Directory of Open Access Journals (Sweden)

E. M. Dorozhkin

2014-01-01

analysis of methodology taking into consideration the target orientation, principles and approaches to the organization and its’ methods of scientific and educational activitiesimplementation. The qualification structure formation of the teachers’ vocational training and providing advance principles of education are considered to be the most important conditions for the development of vocational teacher education.Scientific novelty. The research demonstrates creating the project of further vocational teacher education development in the post-industrial society. The pedagogical innovations transforming research findings into educational practice are considered to be the main tool of integration methodology means.Practical significance. The research findings highlight the proposed reforms for further teachers training system development of vocational institutes, which are in need of drastic restructuring. In the final part of the article the authors recommend some specific issues that can be discussed at the methodological workshop.

Development of a simplified statistical methodology for nuclear fuel rod internal pressure calculation

International Nuclear Information System (INIS)

Kim, Kyu Tae; Kim, Oh Hwan

1999-01-01

A simplified statistical methodology is developed in order to both reduce over-conservatism of deterministic methodologies employed for PWR fuel rod internal pressure (RIP) calculation and simplify the complicated calculation procedure of the widely used statistical methodology which employs the response surface method and Monte Carlo simulation. The simplified statistical methodology employs the system moment method with a deterministic statistical methodology employs the system moment method with a deterministic approach in determining the maximum variance of RIP. The maximum RIP variance is determined with the square sum of each maximum value of a mean RIP value times a RIP sensitivity factor for all input variables considered. This approach makes this simplified statistical methodology much more efficient in the routine reload core design analysis since it eliminates the numerous calculations required for the power history-dependent RIP variance determination. This simplified statistical methodology is shown to be more conservative in generating RIP distribution than the widely used statistical methodology. Comparison of the significances of each input variable to RIP indicates that fission gas release model is the most significant input variable. (author). 11 refs., 6 figs., 2 tabs

Recommendations to Improve Downloads of Large Earth Observation Data

Directory of Open Access Journals (Sweden)

Rahul Ramachandran

2018-01-01

Full Text Available With the volume of Earth observation data expanding rapidly, cloud computing is quickly changing the way these data are processed, analyzed, and visualized. Collocating freely available Earth observation data on a cloud computing infrastructure may create opportunities unforeseen by the original data provider for innovation and value-added data re-use, but existing systems at data centers are not designed for supporting requests for large data transfers. A lack of common methodology necessitates that each data center handle such requests from different cloud vendors differently. Guidelines are needed to support enabling all cloud vendors to utilize a common methodology for bulk-downloading data from data centers, thus preventing the providers from building custom capabilities to meet the needs of individual vendors. This paper presents recommendations distilled from use cases provided by three cloud vendors (Amazon, Google, and Microsoft and are based on the vendors’ interactions with data systems at different Federal agencies and organizations. These specific recommendations range from obvious steps for improving data usability (such as ensuring the use of standard data formats and commonly supported projections to non-obvious undertakings important for enabling bulk data downloads at scale. These recommendations can be used to evaluate and improve existing data systems for high-volume data transfers, and their adoption can lead to cloud vendors utilizing a common methodology.

A performance assessment methodology for high-level radioactive waste disposal in unsaturated, fractured tuff

International Nuclear Information System (INIS)

Gallegos, D.P.

1991-07-01

Sandia National Laboratories, has developed a methodology for performance assessment of deep geologic disposal of high-level nuclear waste. The applicability of this performance assessment methodology has been demonstrated for disposal in bedded salt and basalt; it has since been modified for assessment of repositories in unsaturated, fractured tuff. Changes to the methodology are primarily in the form of new or modified ground water flow and radionuclide transport codes. A new computer code, DCM3D, has been developed to model three-dimensional ground-water flow in unsaturated, fractured rock using a dual-continuum approach. The NEFTRAN 2 code has been developed to efficiently model radionuclide transport in time-dependent velocity fields, has the ability to use externally calculated pore velocities and saturations, and includes the effect of saturation dependent retardation factors. In order to use these codes together in performance-assessment-type analyses, code-coupler programs were developed to translate DCM3D output into NEFTRAN 2 input. Other portions of the performance assessment methodology were evaluated as part of modifying the methodology for tuff. The scenario methodology developed under the bedded salt program has been applied to tuff. An investigation of the applicability of uncertainty and sensitivity analysis techniques to non-linear models indicate that Monte Carlo simulation remains the most robust technique for these analyses. No changes have been recommended for the dose and health effects models, nor the biosphere transport models. 52 refs., 1 fig

Development of an Improved Methodology to Assess Potential Unconventional Gas Resources

International Nuclear Information System (INIS)

Salazar, Jesus; McVay, Duane A.; Lee, W. John

2010-01-01

Considering the important role played today by unconventional gas resources in North America and their enormous potential for the future around the world, it is vital to both policy makers and industry that the volumes of these resources and the impact of technology on these resources be assessed. To provide for optimal decision making regarding energy policy, research funding, and resource development, it is necessary to reliably quantify the uncertainty in these resource assessments. Since the 1970s, studies to assess potential unconventional gas resources have been conducted by various private and governmental agencies, the most rigorous of which was by the United States Geological Survey (USGS). The USGS employed a cell-based, probabilistic methodology which used analytical equations to calculate distributions of the resources assessed. USGS assessments have generally produced distributions for potential unconventional gas resources that, in our judgment, are unrealistically narrow for what are essentially undiscovered, untested resources. In this article, we present an improved methodology to assess potential unconventional gas resources. Our methodology is a stochastic approach that includes Monte Carlo simulation and correlation between input variables. Application of the improved methodology to the Uinta-Piceance province of Utah and Colorado with USGS data validates the means and standard deviations of resource distributions produced by the USGS methodology, but reveals that these distributions are not right skewed, as expected for a natural resource. Our investigation indicates that the unrealistic shape and width of the gas resource distributions are caused by the use of narrow triangular input parameter distributions. The stochastic methodology proposed here is more versatile and robust than the USGS analytic methodology. Adoption of the methodology, along with a careful examination and revision of input distributions, should allow a more realistic

Development of Non-LOCA Safety Analysis Methodology with RETRAN-3D and VIPRE-01/K

International Nuclear Information System (INIS)

Kim, Yo-Han; Cheong, Ae-Ju; Yang, Chang-Keun

2004-01-01

Korea Electric Power Research Institute has launched a project to develop an in-house non-loss-of-coolant-accident analysis methodology to overcome the hardships caused by the narrow analytical scopes of existing methodologies. Prior to the development, some safety analysis codes were reviewed, and RETRAN-3D and VIPRE-01 were chosen as the base codes. The codes have been modified to improve the analytical capabilities required to analyze the nuclear power plants in Korea. The methodologies of the vendors and the Electric Power Research Institute have been reviewed, and some documents of foreign utilities have been used to compensate for the insufficiencies. For the next step, a draft methodology for pressurized water reactors has been developed and modified to apply to Westinghouse-type plants in Korea. To verify the feasibility of the methodology, some events of Yonggwang Units 1 and 2 have been analyzed from the standpoints of reactor coolant system pressure and the departure from nucleate boiling ratio. The results of the analyses show trends similar to those of the Final Safety Analysis Report

Development of a Methodology for Predicting Forest Area for Large-Area Resource Monitoring

Science.gov (United States)

William H. Cooke

2001-01-01

The U.S. Department of Agriculture, Forest Service, Southcm Research Station, appointed a remote-sensing team to develop an image-processing methodology for mapping forest lands over large geographic areds. The team has presented a repeatable methodology, which is based on regression modeling of Advanced Very High Resolution Radiometer (AVHRR) and Landsat Thematic...

Using PICO Methodology to Answer Questions About Smoking in COPD Patients.

Science.gov (United States)

Jiménez Ruiz, Carlos A; Buljubasich, Daniel; Riesco Miranda, Juan Antonio; Acuña Izcaray, Agustín; de Granda Orive, José Ignacio; Chatkin, José Miguel; Zabert, Gustavo; Guerreros Benavides, Alfredo; Paez Espinel, Nelson; Noé, Valeri; Sánchez-Angarita, Efraín; Núñez-Sánchez, Ingrid; Sansores, Raúl H; Casas, Alejandro; Palomar Lever, Andrés; Alfageme Michavila, Inmaculada

2017-11-01

The ALAT and SEPAR Treatment and Control of Smoking Groups have collaborated in the preparation of this document which attempts to answer, by way of PICO methodology, different questions on health interventions for helping COPD patients to stop smoking. The main recommendations are: (i)moderate-quality evidence and strong recommendation for performing spirometry in COPD patients and in smokers with a high risk of developing the disease, as a motivational tool (particularly for showing evidence of lung age), a diagnostic tool, and for active case-finding; (ii)high-quality evidence and strong recommendation for using intensive dedicated behavioral counselling and drug treatment for helping COPD patients to stop smoking; (iii)high-quality evidence and strong recommendation for initiating interventions for helping COPD patients to stop smoking during hospitalization with improvement when the intervention is prolonged after discharge, and (iv)high-quality evidence and strong recommendation for funding treatment of smoking in COPD patients, in view of the impact on health and health economics. Copyright © 2017 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

Methodology to evaluate the site standard seismic motion for a nuclear facility

International Nuclear Information System (INIS)

Soares, W.A.

1983-03-01

An overall view of the subjects involved in the determination of the site standard seismic motion to a nuclear facility is presented. The main topics discussed are: basic priciples of seismic instrumentation; dynamic and spectral concepts; design earthquakes definitions; fundamentals of seismology; empirical curves developed from prior seismic data; avalable methodologies and recommended procedures to evaluate the site standard seismic motion. (E.G.) [pt

Development of a methodology of evaluation of financial stability of commercial banks

Directory of Open Access Journals (Sweden)

Brauers Willem Karel M.

2014-01-01

Full Text Available The field of evaluation of financial stability of commercial banks, which emanates from persistent existence of financial crisis, induces interest of researchers for over a century. The span of prevailing methodologies stretches from over-simplified risk-return approaches to ones comprising large number of economic variables on the micro- and/or macro-economic level. Methodologies of rating agencies and current methodologies reviewed and applied by the ECB are not intended for reducing information asymmetry in the market of commercial banks. In the paper it is shown that the Lithuanian financial system is bankbased with deposits of households being its primary sources, and its stability is primarily depending on behavior of depositors. A methodology of evaluation of commercial banks with features of decreasing information asymmetry in the market of commercial banks is being developed by comparing different MCDA methods.

METHODOLOGICAL BASES OF PUBLIC ADMINISTRATION OF PUBLIC DEVELOPMENT IN UKRAINE

Directory of Open Access Journals (Sweden)

Kyrylo Ohdanskyi

2016-11-01

Full Text Available An author in the article examines theoretical bases in the question of dynamics of community development. According to classic canons a dynamic process on any of levels of management hierarchy can be presented as a complex of changes of its ecological, economic and social components. For today, national politics in the field of realization of conception of community development does not take into account most theoretical works, which testify that in our country the mechanism of its effective adjusting is not yet created. In connection to this the author of the article accents the attention on the necessity of the use in modern Ukraine realities of the effective approaches to government control of community development. As the subject of research of the article the author chose the analysis of process of community development and methodological bases for the choice of variants for a management by this process. System approach is chosen by author as a research methodology. The aim. Analysis of theoretical bases and developing of the new approaches to the government administration of community development. An author divides the process of community development by constituents: social, economic and ecological components. From the indicated warning it is necessary to take into account the objective necessity of developing of the new conceptual approaches to the elaboration of tool of adjusting of community development. For the decision of this task the author of the article it is suggested to use the category “dynamics”. An author in the article does the analysis of different interpretations of term “dynamics”and offers his own interpretation in the context of community development. Our researches confirm that, mainly, it is methodologically possible to form the blocks of quantitative and quality factors of specific different information of ecological, economic and social character. Author’s researches confirm that it is methodologically

The status of proliferation resistance evaluation methodology development in GEN IV international forum

International Nuclear Information System (INIS)

Inoue, Naoko; Kawakubo, Yoko; Seya, Michio; Suzuki, Mitsutoshi; Kuno, Yusuke; Senzaki, Masao

2010-01-01

The Generation IV Nuclear Energy Systems International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PR and PP WG) was established in December 2002 in order to develop the PR and PP evaluation methodology for GEN IV nuclear energy systems. The methodology has been studied and established by international consensus. The PR and PP WG activities include development of the measures and metrics; establishment of the framework of PR and PP evaluation, the demonstration study using Example Sodium Fast Reactor (ESFR), which included the development of three evaluation approaches; the Case Study using ESFR and four kinds of threat scenarios; the joint study with GIF System Steering Committees (SSCs) of the six reactor design concepts; and the harmonization study with the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). This paper reviews the status of GIF PR and PP studies and identifies the challenges and directions for applying the methodology to evaluate future nuclear energy systems in Japan. (author)

Development of the fire PSA methodology and the fire analysis computer code system

International Nuclear Information System (INIS)

Katsunori, Ogura; Tomomichi, Ito; Tsuyoshi, Uchida; Yusuke, Kasagawa

2009-01-01

Fire PSA methodology has been developed and was applied to NPPs in Japan for power operation and LPSD states. CDFs of preliminary fire PSA for power operation were the higher than that of internal events. Fire propagation analysis code system (CFAST/FDS Network) was being developed and verified thru OECD-PRISME Project. Extension of the scope for LPSD state is planned to figure out the risk level. In order to figure out the fire risk level precisely, the enhancement of the methodology is planned. Verification and validation of phenomenological fire propagation analysis code (CFAST/FDS Network) in the context of Fire PSA. Enhancement of the methodology such as an application of 'Electric Circuit Analysis' in NUREG/CR-6850 and related tests in order to quantify the hot-short effect precisely. Development of seismic-induced fire PSA method being integration of existing seismic PSA and fire PSA methods is ongoing. Fire PSA will be applied to review the validity of fire prevention and mitigation measures

The Methodology of the Process of Formation of Innovation Management of Enterprises’ Development

Directory of Open Access Journals (Sweden)

Prokhorova Viktoriia V.

2017-12-01

Full Text Available The article is aimed at forming the methodology of process of innovation management of enterprises’ development in modern conditions. A study on formation of the essence of methodology was carried out, the stages of development of methods and means of scientific cognition were analyzed. The basic components of formation of methodology of innovation management of development of enterprises have been defined, i.e.: methods, types, principles, components, systematized aggregate. The relations of empirical and theoretical methods of scientific cognition were considered and defined. It has been determined that the increase of the volume and scope of scientific views, as well as the deepening of scientific knowledge in the disclosure of laws and regularities of functioning of real natural and social world, lead to the objective fact that is the desire of scientists to analyze methods and means by which modern innovative knowledge and views in the enterprise management system can be acquired and formed.

Non-linear mixed effects modeling - from methodology and software development to driving implementation in drug development science.

Science.gov (United States)

Pillai, Goonaseelan Colin; Mentré, France; Steimer, Jean-Louis

2005-04-01

Few scientific contributions have made significant impact unless there was a champion who had the vision to see the potential for its use in seemingly disparate areas-and who then drove active implementation. In this paper, we present a historical summary of the development of non-linear mixed effects (NLME) modeling up to the more recent extensions of this statistical methodology. The paper places strong emphasis on the pivotal role played by Lewis B. Sheiner (1940-2004), who used this statistical methodology to elucidate solutions to real problems identified in clinical practice and in medical research and on how he drove implementation of the proposed solutions. A succinct overview of the evolution of the NLME modeling methodology is presented as well as ideas on how its expansion helped to provide guidance for a more scientific view of (model-based) drug development that reduces empiricism in favor of critical quantitative thinking and decision making.

Developing new methodology for nuclear power plants vulnerability assessment

International Nuclear Information System (INIS)

Kostadinov, Venceslav

2011-01-01

new methodology and solution methods for vulnerability assessment can help the overall national energy sector to identify and understand the terrorist threats to and vulnerabilities of its critical infrastructure. Moreover, adopted methodology could help national regulators and agencies to develop and implement a vulnerability awareness and education programs for their critical assets to enhance the security and a safe operation of the entire energy infrastructure. New methods can also assist nuclear power plants to develop, validate, and disseminate assessment and surveys of new efficient countermeasures. Consequently, concise description of developed new quantitative method and adapted new methodology for nuclear regulatory vulnerability assessment of nuclear power plants are presented.

Long-term Mechanical Circulatory Support System reliability recommendation by the National Clinical Trial Initiative subcommittee.

Science.gov (United States)

Lee, James

2009-01-01

The Long-Term Mechanical Circulatory Support (MCS) System Reliability Recommendation was published in the American Society for Artificial Internal Organs (ASAIO) Journal and the Annals of Thoracic Surgery in 1998. At that time, it was stated that the document would be periodically reviewed to assess its timeliness and appropriateness within 5 years. Given the wealth of clinical experience in MCS systems, a new recommendation has been drafted by consensus of a group of representatives from the medical community, academia, industry, and government. The new recommendation describes a reliability test methodology and provides detailed reliability recommendations. In addition, the new recommendation provides additional information and clinical data in appendices that are intended to assist the reliability test engineer in the development of a reliability test that is expected to give improved predictions of clinical reliability compared with past test methods. The appendices are available for download at the ASAIO journal web site at www.asaiojournal.com.

Development of probabilistic assessment methodology for geologic disposal of radioactive wastes

International Nuclear Information System (INIS)

Kimura, H.; Takahashi, T.

1998-01-01

The probabilistic assessment methodology is essential to evaluate uncertainties of long-term radiological consequences associated with geologic disposal of radioactive wastes. We have developed a probabilistic assessment methodology to estimate the influences of parameter uncertainties/variabilities. An exposure scenario considered here is based on a groundwater migration scenario. A computer code system GSRW-PSA thus developed is based on a non site-specific model, and consists of a set of sub modules for sampling of model parameters, calculating the release of radionuclides from engineered barriers, calculating the transport of radionuclides through the geosphere, calculating radiation exposures of the public, and calculating the statistical values relating the uncertainties and sensitivities. The results of uncertainty analyses for α-nuclides quantitatively indicate that natural uranium ( 238 U) concentration is suitable for an alternative safety indicator of long-lived radioactive waste disposal, because the estimated range of individual dose equivalent due to 238 U decay chain is narrower that that due to other decay chain ( 237 Np decay chain). It is internationally necessary to have detailed discussion on the PDF of model parameters and the PSA methodology to evaluated the uncertainties due to conceptual models and scenarios. (author)

Progress in the development of methodology for fusion safety systems studies

International Nuclear Information System (INIS)

Ho, S.K.; Cambi, G.; Ciattaglia, S.; Fujii-e, Y.; Seki, Y.

1994-01-01

The development of fusion safety systems-study methodology, including the aspects of schematic classification of overall fusion safety system, qualitative assessment of fusion system for identification of critical accident scenarios, quantitative analysis of accident consequences and risk for safety design evaluation, and system-level analysis of accident consequences and risk for design optimization, by a consortium of international efforts is presented. The potential application of this methodology into reactor design studies will facilitate the systematic assessment of safety performance of reactor designs and enhance the impacts of safety considerations on the selection of design configurations

Interrupted time series analysis in drug utilization research is increasing: systematic review and recommendations.

Science.gov (United States)

Jandoc, Racquel; Burden, Andrea M; Mamdani, Muhammad; Lévesque, Linda E; Cadarette, Suzanne M

2015-08-01

To describe the use and reporting of interrupted time series methods in drug utilization research. We completed a systematic search of MEDLINE, Web of Science, and reference lists to identify English language articles through to December 2013 that used interrupted time series methods in drug utilization research. We tabulated the number of studies by publication year and summarized methodological detail. We identified 220 eligible empirical applications since 1984. Only 17 (8%) were published before 2000, and 90 (41%) were published since 2010. Segmented regression was the most commonly applied interrupted time series method (67%). Most studies assessed drug policy changes (51%, n = 112); 22% (n = 48) examined the impact of new evidence, 18% (n = 39) examined safety advisories, and 16% (n = 35) examined quality improvement interventions. Autocorrelation was considered in 66% of studies, 31% reported adjusting for seasonality, and 15% accounted for nonstationarity. Use of interrupted time series methods in drug utilization research has increased, particularly in recent years. Despite methodological recommendations, there is large variation in reporting of analytic methods. Developing methodological and reporting standards for interrupted time series analysis is important to improve its application in drug utilization research, and we provide recommendations for consideration. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Applying of component system development in object methodology

Directory of Open Access Journals (Sweden)

Milan Mišovič

2013-01-01

software system and referred to as software alliance.In both of these mentioned publications there is delivered ​​deep philosophy of relevant issues relating to SWC / SWA as creating copies of components (cloning, the establishment and destruction of components at software run-time (dynamic reconfiguration, cooperation of autonomous components, programmable management of components interface in depending on internal components functionality and customer requirements (functionality, security, versioning.Nevertheless, even today we can meet numerous cases of SWC / SWA existence, with a highly developed architecture that is accepting vast majority of these requests. On the other hand, in the development practice of component-based systems with a dynamic architecture (i.e. architecture with dynamic reconfiguration, and finally with a mobile architecture (i.e. architecture with dynamic component mobility confirms the inadequacy of the design methods contained in UML 2.0. It proves especially the dissertation thesis (Rych, Weis, 2008. Software Engineering currently has two different approaches to systems SWC / SWA. The first approach is known as component-oriented software development CBD (Component based Development. According to (Szyper, 2002 that is a collection of CBD methodologies that are heavily focused on the setting up and software components re-usability within the architecture. Although CBD does not show high theoretical approach, nevertheless, it is classified under the general evolution of SDP (Software Development Process, see (Sommer, 2010 as one of its two dominant directions.From a structural point of view, a software system consists of self-contained, interoperable architectural units – components based on well-defined interfaces. Classical procedural object-oriented methodologies significantly do not use the component meta-models, based on which the target component systems are formed, then. Component meta-models describe the syntax, semantics of

Contracting Selection for the Development of the Range Rule Risk Methodology

National Research Council Canada - National Science Library

1997-01-01

...-Effectiveness Risk Tool and contractor selection for the development of the Range Rule Risk Methodology. The audit objective was to determine whether the Government appropriately used the Ordnance and Explosives Cost-Effectiveness Risk Tool...

Methodology for the insecticide potential evaluation of forest species

International Nuclear Information System (INIS)

Morales Soto, Leon; Garcia P, Carlos Mario

2000-01-01

The flora diversity of Colombia has an enormous potential in the rational use of its forest resources. Trees with biocides effects to pest control and diseases need to be investigated. The objective of this research was to develop a methodology with low costs, easy application and quick results. The methodology employed was as follows: selection of tree species based on bibliography, ancestral reports and personal observations. The process was as follows: field collection of plants, preparation of plants extracts, and test with Artemia Salina, leach to detect biological activity of the extracts using LC50. Bioassays with those extract more promising (LC50 less than 1000 ppm). The methodology was employed with 5 forest tree species: Guarea guidonia (L.) Sleumer and Trichia hirta L. (Meliaceae), machaerium moritzianum Benth. (Fabaceae), Swinglea glutinosa Merrill. (Rutaceae) and Mammea americana L. (Clusiaceae). Using Artemia salina Leach as indicator of biocidal potential, two species were selected as the most promising, those were: Swinglea glutinosa Merril and Machaerium moritzianum Benth. In addition bioassays were made to evaluate fagoinhibition on Atta cephalotes (L.) and control of Alconeura. This methodology is recommended for this kind of research

An automated methodology development. [software design for combat simulation

Science.gov (United States)

Hawley, L. R.

1985-01-01

The design methodology employed in testing the applicability of Ada in large-scale combat simulations is described. Ada was considered as a substitute for FORTRAN to lower life cycle costs and ease the program development efforts. An object-oriented approach was taken, which featured definitions of military targets, the capability of manipulating their condition in real-time, and one-to-one correlation between the object states and real world states. The simulation design process was automated by the problem statement language (PSL)/problem statement analyzer (PSA). The PSL/PSA system accessed the problem data base directly to enhance the code efficiency by, e.g., eliminating non-used subroutines, and provided for automated report generation, besides allowing for functional and interface descriptions. The ways in which the methodology satisfied the responsiveness, reliability, transportability, modifiability, timeliness and efficiency goals are discussed.

Clinical practice guideline: 2006 update of recommendations for the radiotherapeutic management of patients with soft tissue sarcoma (sarcoma of the extremity, uterine sarcoma and retroperitoneal sarcoma)

International Nuclear Information System (INIS)

Le Pechoux, C.; Pautier, P.; Le Cesne, A.; Delannes, M.; Bui, B.N.; Blay, J.Y.; Bonichon, F.; Bonvalot, S.; Morice, P.; Chevalier-Place, A.; Taieb, S.; Coindre, J.M.; Ray-Coquard, I.; Stoeckle, E.

2006-01-01

Context. - The National French Federation of Comprehensive Cancer Centres (FNCLCC) initiated the update of clinical practice guideline for the management of patients with soft tissue sarcoma in collaboration with the French Sarcoma Group (GSF-GETO), specialists from French public universities, general hospitals and private clinics and with the French National Cancer Institute. This work is based on the methodology developed in the 'Standards, Options and Recommendations' (SOR) project. Objectives - To update SOR guidelines for the management of patients with oft tissue sarcoma previously validated in 1995. Methods. -The methodology is based on a literature review and critical appraisal by a multidisciplinary group of experts who define the CPGs according to the definitions of the Standards, Options and Recommendations project. Once the guidelines have been developed, they are reviewed by independent reviewers. Results. - This article presents the updated recommendations for radiotherapeutic management. The main recommendations are: 1) irradiation before or after surgical treatment is the standard for soft tissue sarcoma of the extremity and uterine sarcoma; 2) no systematic irradiation should be done in case of retroperitoneal sarcoma. (author)

Development of a new methodology for quantifying nuclear safety culture

International Nuclear Information System (INIS)

Han, Kiyoon; Jae, Moosung

2017-01-01

The present study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses a safety culture impact index (SCII) to monitor the status of safety culture of NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of NPPs. As a result of applying the SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

Development of a new methodology for quantifying nuclear safety culture

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of). Dept. of Nuclear Engineering

2017-01-15

The present study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses a safety culture impact index (SCII) to monitor the status of safety culture of NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of NPPs. As a result of applying the SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

Development of Methodologies for the Estimation of Thermal Properties Associated with Aerospace Vehicles

Science.gov (United States)

Scott, Elaine P.

1996-01-01

A thermal stress analysis is an important aspect in the design of aerospace structures and vehicles such as the High Speed Civil Transport (HSCT) at the National Aeronautics and Space Administration Langley Research Center (NASA-LaRC). These structures are complex and are often composed of numerous components fabricated from a variety of different materials. The thermal loads on these structures induce temperature variations within the structure, which in turn result in the development of thermal stresses. Therefore, a thermal stress analysis requires knowledge of the temperature distributions within the structures which consequently necessitates the need for accurate knowledge of the thermal properties, boundary conditions and thermal interface conditions associated with the structural materials. The goal of this proposed multi-year research effort was to develop estimation methodologies for the determination of the thermal properties and interface conditions associated with aerospace vehicles. Specific objectives focused on the development and implementation of optimal experimental design strategies and methodologies for the estimation of thermal properties associated with simple composite and honeycomb structures. The strategy used in this multi-year research effort was to first develop methodologies for relatively simple systems and then systematically modify these methodologies to analyze complex structures. This can be thought of as a building block approach. This strategy was intended to promote maximum usability of the resulting estimation procedure by NASA-LARC researchers through the design of in-house experimentation procedures and through the use of an existing general purpose finite element software.

Philadelphia chromosome-negative classical myeloproliferative neoplasms: revised management recommendations from European LeukemiaNet.

Science.gov (United States)

Barbui, Tiziano; Tefferi, Ayalew; Vannucchi, Alessandro M; Passamonti, Francesco; Silver, Richard T; Hoffman, Ronald; Verstovsek, Srdan; Mesa, Ruben; Kiladjian, Jean-Jacques; Hehlmann, Rȕdiger; Reiter, Andreas; Cervantes, Francisco; Harrison, Claire; Mc Mullin, Mary Frances; Hasselbalch, Hans Carl; Koschmieder, Steffen; Marchetti, Monia; Bacigalupo, Andrea; Finazzi, Guido; Kroeger, Nicolaus; Griesshammer, Martin; Birgegard, Gunnar; Barosi, Giovanni

2018-05-01

This document updates the recommendations on the management of Philadelphia chromosome-negative myeloproliferative neoplasms (Ph-neg MPNs) published in 2011 by the European LeukemiaNet (ELN) consortium. Recommendations were produced by multiple-step formalized procedures of group discussion. A critical appraisal of evidence by using Grades of Recommendation, Assessment, Development and Evaluation (GRADE) methodology was performed in the areas where at least one randomized clinical trial was published. Seven randomized controlled trials provided the evidence base; earlier phase trials also informed recommendation development. Key differences from the 2011 diagnostic recommendations included: lower threshold values for hemoglobin and hematocrit and bone marrow examination for diagnosis of polycythemia vera (PV), according to the revised WHO criteria; the search for complementary clonal markers, such as ASXL1, EZH2, IDH1/IDH2, and SRSF2 for the diagnosis of myelofibrosis (MF) in patients who test negative for JAK2V617, CALR or MPL driver mutations. Regarding key differences of therapy recommendations, both recombinant interferon alpha and the JAK1/JAK2 inhibitor ruxolitinib are recommended as second-line therapies for PV patients who are intolerant or have inadequate response to hydroxyurea. Ruxolitinib is recommended as first-line approach for MF-associated splenomegaly in patients with intermediate-2 or high-risk disease; in case of intermediate-1 disease, ruxolitinib is recommended in highly symptomatic splenomegaly. Allogeneic stem cell transplantation is recommended for transplant-eligible MF patients with high or intermediate-2 risk score. Allogeneic stem cell transplantation is also recommended for transplant-eligible MF patients with intermediate-1 risk score who present with either refractory, transfusion-dependent anemia, blasts in peripheral blood > 2%, adverse cytogenetics, or high-risk mutations. In these situations, the transplant procedure should be

Developing Jobs and Neighborhoods through Small Business Growth: Recommendations for Action.

Science.gov (United States)

Holzman, Michael S.

Research was conducted to define methods for creating jobs for urban youth through small business expansion, particularly in Chicago. This report presents recommendations derived from the research. The first section suggests ways of increasing the effectiveness of Chicago's small business/neighborhood economic development efforts. The second…

A New Methodology of Design and Development of Serious Games

Directory of Open Access Journals (Sweden)

André F. S. Barbosa

2014-01-01

Full Text Available The development of a serious game requires perfect knowledge of the learning domain to obtain the desired results. But it is also true that this may not be enough to develop a successful serious game. First of all, the player has to feel that he is playing a game where the learning is only a consequence of the playing actions. Otherwise, the game is viewed as boring and not as a fun activity and engaging. For example, the player can catch some items in the scenario and then separate them according to its type (i.e., recycle them. Thus, the main action for player is catching the items in the scenario where the recycle action is a second action, which is viewed as a consequence of the first action. Sometimes, the game design relies on a detailed approach based on the ideas of the developers because some educational content are difficult to integrate in the games, while maintaining the fun factor in the first place. In this paper we propose a new methodology of design and development of serious games that facilitates the integration of educational contents in the games. Furthermore, we present a serious game, called “Clean World”, created using this new methodology.

Mining the preferences of patients for ubiquitous clinic recommendation.

Science.gov (United States)

Chen, Tin-Chih Toly; Chiu, Min-Chi

2018-03-06

A challenge facing all ubiquitous clinic recommendation systems is that patients often have difficulty articulating their requirements. To overcome this problem, a ubiquitous clinic recommendation mechanism was designed in this study by mining the clinic preferences of patients. Their preferences were defined using the weights in the ubiquitous clinic recommendation mechanism. An integer nonlinear programming problem was solved to tune the values of the weights on a rolling basis. In addition, since it may take a long time to adjust the values of weights to their asymptotic values, the back propagation network (BPN)-response surface method (RSM) method is applied to estimate the asymptotic values of weights. The proposed methodology was tested in a regional study. Experimental results indicated that the ubiquitous clinic recommendation system outperformed several existing methods in improving the successful recommendation rate.

Recommendations to enhance constructivist-based learning in Interprofessional Education using video-based self-assessment

Directory of Open Access Journals (Sweden)

Dahmen, Uta

2016-04-01

Full Text Available Introduction: Interprofessional collaboration is crucial to the optimization of patient care.Aim: This paper aims to provide recommendations for implementing an innovative constructivist educational concept with the core element of video-based self-assessment.Methodology: A course for students in medicine, physiotherapy, and nursing was developed through interprofessional, cross-institutional collaboration. The course consisted of We evaluated the preparation and implementation of the three courses conducted thus far. Concrete recommendations for implementation were made based on evaluation sheets (students, open discussions (tutors, instructors, institutions and recorded meeting minutes (project managers, project participants.Results: Basic recommendations for implementation include: selecting appropriate criteria for self-assessment and a simulated situation that offers members of each professional group an equal opportunity to act in the role play. In terms of administrative implementation we recommend early coordination among the professions and educational institutions regarding the target groups, scheduling and attendance policy to ensure participant recruitment across all professions. Procedural planning should include developing teaching materials, such as the case vignette and treatment scenario, and providing technical equipment that can be operated intuitively in order to ensure efficient recording.Conclusion: These recommendations serve as an aid for implementing an innovative constructivist educational concept with video-based self-assessment at its core.

An evaluation of methodology for seismic qualification of equipment, cable trays, and ducts in ALWR plants by use of experience data

International Nuclear Information System (INIS)

Bandyopadhyay, K.K.; Kana, D.D.; Kennedy, R.P.; Schiff, A.J.

1997-07-01

Advanced Reactor Corporation (ARC) has developed a methodology for seismic qualification of equipment, cable trays and ducts in Advanced Light Water Reactor plants. A Panel (members of which acted as individuals) supported by the Office of Nuclear Regulatory Research of the Nuclear Regulatory Commission has evaluated this methodology. The review approach and observations are included in this report. In general, the Panel supports the ARC methodology with some exceptions and provides recommendations for further improvements. 26 refs., 10 figs., 1 tab

An evaluation of methodology for seismic qualification of equipment, cable trays, and ducts in ALWR plants by use of experience data

Energy Technology Data Exchange (ETDEWEB)

Bandyopadhyay, K.K.; Kana, D.D.; Kennedy, R.P.; Schiff, A.J.

1997-07-01

Advanced Reactor Corporation (ARC) has developed a methodology for seismic qualification of equipment, cable trays and ducts in Advanced Light Water Reactor plants. A Panel (members of which acted as individuals) supported by the Office of Nuclear Regulatory Research of the Nuclear Regulatory Commission has evaluated this methodology. The review approach and observations are included in this report. In general, the Panel supports the ARC methodology with some exceptions and provides recommendations for further improvements. 26 refs., 10 figs., 1 tab.

Methodology assessment and recommendations for the Mars science laboratory launch safety analysis.

Energy Technology Data Exchange (ETDEWEB)

Sturgis, Beverly Rainwater; Metzinger, Kurt Evan; Powers, Dana Auburn; Atcitty, Christopher B.; Robinson, David B; Hewson, John C.; Bixler, Nathan E.; Dodson, Brian W.; Potter, Donald L.; Kelly, John E.; MacLean, Heather J.; Bergeron, Kenneth Donald (Sala & Associates); Bessette, Gregory Carl; Lipinski, Ronald J.

2006-09-01

thousands of possible event sequences and to build up a statistical representation of the releases for each accident case. A code to carry out this process will have to be developed or adapted from previous MMRTG missions. Finally, Level C translates the release (or ''source term'') information from Level B into public risk by applying models for atmospheric transport and the health consequences of exposure to the released plutonium dioxide. A number of candidate codes for this level of analysis are available. This report surveys the range of available codes and tools for each of these levels and makes recommendations for which choices are best for the MSL mission. It also identities areas where improvements to the codes are needed. In some cases a second tier of codes may be identified to provide supporting or clarifying insight about particular issues. The main focus of the methodology assessment is to identify a suite of computational tools that can produce a high quality SAR that can be successfully reviewed by external bodies (such as the Interagency Nuclear Safety Review Panel) on the schedule established by NASA and DOE.

Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

International Nuclear Information System (INIS)

Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.; Lin, T.; Haley, T.A.; Barto, A.B.; Stutzke, M.A.

1996-01-01

The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to that team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document

Methodology Development for SiC Sensor Signal Modelling in the Nuclear Reactor Radiation Environments

International Nuclear Information System (INIS)

Cetnar, J.; Krolikowski, I.P.

2013-06-01

This paper deals with SiC detector simulation methodology for signal formation by neutrons and induced secondary radiation as well as its inverse interpretation. The primary goal is to achieve the SiC capability of simultaneous spectroscopic measurements of neutrons and gamma-rays for which an appropriate methodology of the detector signal modelling and its interpretation must be adopted. The process of detector simulation is divided into two basically separate but actually interconnected sections. The first one is the forward simulation of detector signal formation in the field of the primary neutron and secondary radiations, whereas the second one is the inverse problem of finding a representation of the primary radiation, based on the measured detector signals. The applied methodology under development is based on the Monte Carlo description of radiation transport and analysis of the reactor physics. The methodology of SiC detector signal interpretation will be based on the existing experience in neutron metrology developed in the past for various neutron and gamma-ray detection systems. Since the novel sensors based on SiC are characterised by a new structure, yet to be finally designed, the methodology for particle spectroscopic fluence measurement must be developed while giving a productive feed back to the designing process of SiC sensor, in order to arrive at the best possible design. (authors)

Development of methodology and direction of practice administrative neuromarketing

OpenAIRE

Glushchenko V.; Glushchenko I.

2018-01-01

Development of methodology and practical aspects of application of administrative neuromarketing acts as a subject of work, subject of article is administrative neuromarketing in the organization, in article the concept and content of administrative neuromarketing, philosophy, culture, functions, tasks and the principles of administrative neuromarketing are investigated, the technique of the logical analysis of a possibility of application of methods of administrative neuromarketing for incre...

Standards, options and recommends for the external radiotherapy of patients reached by prostate carcinoma: evaluation of dose effect

International Nuclear Information System (INIS)

Pommier, P.; Fervers, B.; Villers, A.; Bataillard, A.

2002-01-01

The 'Standards, Options and Recommendations' (SOR) collaborative project was initiated in 1993 by the Federation of the French Cancer Centres (FNCLCC), with the 20 French Regional Cancer Centres (FNCCLCC), with the 20 French Regional Cancer Centres, several French public university and general hospitals, as well as private clinics and medical specialty societies. Its main objective is the development of serviceable clinical practice guidelines in order to improve the quality of health care and the outcome of cancer patients. The methodology is based on a literature review, followed by critical appraisal by a multidisciplinary group of experts. Draft guidelines for the radiotherapy of prostate cancer using the methodology developed by the Standards, Options and Recommendations project. The FNCLCC and the French Urology Association (AFU) designated the multidisciplinary group of experts. Available data were collected by a search of Medline and lists selected by experts in the group A first draft of the guidelines was written, they validated by independent reviewers. The main recommendations are: a minimal dose of 70 Gy; patients with intermediate prognosis are the ones who benefit most from the dose escalation effect over 74 Gy, provided they receive exclusive radiation therapy; whenever possible, patients should be included in controlled trials designed to assess the effects of dose escalation and hormonotherapy. (author)

Development and Attestation of Gamma-Ray Measurement Methodologies for use by Rostekhnadzor Inspectors in the Russian Federation

International Nuclear Information System (INIS)

Jeff Sanders

2006-01-01

Development and attestation of gamma-ray non-destructive assay measurement methodologies for use by inspectors of the Russian Federal Service for Environmental, Technological, and Nuclear Oversight (Rostekhnadzor, formerly Gosatomnadzor or GAN), as well as for use by Russian nuclear facilities, has been completed. Specifically, a methodology utilizing the gamma-ray multi group analysis (MGA) method for determining plutonium isotopic composition has been developed, while existing methodologies to determining uranium enrichment and isotopic composition have been revised to make them more appropriate to the material types and conditions present in nuclear facilities in the Russian Federation. This paper will discuss the development and revision of these methodologies, the metrological characteristics of the final methodologies, as well as the limitations and concerns specific to the utilization of these analysis methods in the Russian Federation

Physiotherapy in the intensive care unit: an evidence-based, expert driven, practical statement and rehabilitation recommendations

Science.gov (United States)

Sommers, Juultje; Engelbert, Raoul HH; Dettling-Ihnenfeldt, Daniela; Gosselink, Rik; Spronk, Peter E; Nollet, Frans; van der Schaaf, Marike

2015-01-01

Objective: To develop evidence-based recommendations for effective and safe diagnostic assessment and intervention strategies for the physiotherapy treatment of patients in intensive care units. Methods: We used the EBRO method, as recommended by the ‘Dutch Evidence Based Guideline Development Platform’ to develop an ‘evidence statement for physiotherapy in the intensive care unit’. This method consists of the identification of clinically relevant questions, followed by a systematic literature search, and summary of the evidence with final recommendations being moderated by feedback from experts. Results: Three relevant clinical domains were identified by experts: criteria to initiate treatment; measures to assess patients; evidence for effectiveness of treatments. In a systematic literature search, 129 relevant studies were identified and assessed for methodological quality and classified according to the level of evidence. The final evidence statement consisted of recommendations on eight absolute and four relative contra-indications to mobilization; a core set of nine specific instruments to assess impairments and activity restrictions; and six passive and four active effective interventions, with advice on (a) physiological measures to observe during treatment (with stopping criteria) and (b) what to record after the treatment. Conclusions: These recommendations form a protocol for treating people in an intensive care unit, based on best available evidence in mid-2014. PMID:25681407

A methodology to modify land uses in a transit oriented development scenario.

Science.gov (United States)

Sahu, Akshay

2018-05-01

Developing nations are adopting transit oriented development (TOD) strategies to decongest their transportation systems. These strategies are often adopted after the preparation of land use plans. The goal of this study was to build a methodology to modify these land uses using soft computing. This can help to achieve alternate land use plans relevant to TOD. The methodology incorporates TOD characteristics and objectives. Global TOD parameters (density, diversity, and distance to transit) were studied. Expert opinions gave weights and ranges for the parameters in an Indian TOD scenario. Rules to allocate land use was developed. Objective functions were defined. Four objectives were used. First was to maximize employment density, residential density and percent of mix land use. Second was to shape density and diversity with respect to distance. Third was to minimize degree of land use change, and fourth was to increase compactness of the land use allocation. The methodology was applied to two sectors of Naya Raipur, the new planned administrative capital of the state of Chhattisgarh, India. The city has implemented TOD in the form of Bus rapid transit system (BRTS) over an existing land use. Thousand random plans were generated through the methodology. Top 30 plans were selected as parent population for modifications through genetic algorithm (GA). Alternate plans were generated at the end of GA cycle. The best alternate plan was compared with successful BRTS and TOD land uses for its merits and demerits. It was also compared with the initial land use plan for empirical validation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Baseline recommendations for greenhouse gas mitigation projects in the electric power sector

Energy Technology Data Exchange (ETDEWEB)

Kartha, Sivan; Lazarus, Michael [Stockholm Environment Institute/Tellus Institute, Boston, MA (United States); Bosi, Martina [International Energy Agency, Paris, 75 (France)

2004-03-01

The success of the Clean Development Mechanism (CDM) and other credit-based emission trading regimes depends on effective methodologies for quantifying a project's emissions reductions. The key methodological challenge lies in estimating project's counterfactual emission baseline, through balancing the need for accuracy, transparency, and practicality. Baseline standardisation (e.g. methodology, parameters and/or emission rate) can be a means to achieve these goals. This paper compares specific options for developing standardised baselines for the electricity sector - a natural starting point for baseline standardisation given the magnitude of the emissions reductions opportunities. The authors review fundamental assumptions that baseline studies have made with respect to estimating the generation sources avoided by CDM or other emission-reducing projects. Typically, studies have assumed that such projects affect either the operation of existing power plants (the operating margin) or the construction of new generation facilities (the build margin). The authors show that both effects are important to consider and thus recommend a combined margin approach for most projects, based on grid-specific data. They propose a three-category framework, according to projects' relative scale and environmental risk. (Author)

Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society on the Recommended Amount of Sleep for a Healthy Adult: Methodology and Discussion.

Science.gov (United States)

Watson, Nathaniel F; Badr, M Safwan; Belenky, Gregory; Bliwise, Donald L; Buxton, Orfeu M; Buysse, Daniel; Dinges, David F; Gangwisch, James; Grandner, Michael A; Kushida, Clete; Malhotra, Raman K; Martin, Jennifer L; Patel, Sanjay R; Quan, Stuart F; Tasali, Esra

2015-08-01

The American Academy of Sleep Medicine and Sleep Research Society recently released a Consensus Statement regarding the recommended amount of sleep to promote optimal health in adults. This paper describes the methodology, background literature, voting process, and voting results for the consensus statement. In addition, we address important assumptions and challenges encountered during the consensus process. Finally, we outline future directions that will advance our understanding of sleep need and place sleep duration in the broader context of sleep health. © 2015 Associated Professional Sleep Societies, LLC.

Bibliographic survey on methodologies for development of health database of the population in case of cancer occurrences

International Nuclear Information System (INIS)

Cavinato, Christianne C.; Andrade, Delvonei A. de; Sabundjian, Gaiane; Diz, Maria Del Pilar E.

2014-01-01

The objective is to make a survey of existing methodologies and for the development of public health database, focusing on health (fatal and nonfatal cancer) of the population surrounding a nuclear facility, for purposes of calculating the environmental cost of the same. From methodologies found to develop this type of database, a methodology will be developed to be applied to the internal public of IPEN/CNEN-SP, Brazil, as a pre-test for the acquisition of health information desired

Contextual assessment of organisational culture - methodological development in two case studies

International Nuclear Information System (INIS)

Reiman, T.; Oedewald, P.

2002-01-01

Despite the acknowledged significance of organisational culture in the nuclear field, previous cultural studies have concentrated on purely safety related matters, or been only descriptive in nature. New kinds of methods, taking into account the overall objectives of the organisation, were needed to assess culture and develop its working practices appropriately. VTT developed the Contextual Assessment of Organisational Culture (CAOC) methodology during the FINNUS programme. The methodology utilises two concepts, organisational culture and core task. The core task can be defined as the core demands and content of work that the organisation has to accomplish in order to be effective. The core task concept is used in assessing the central dimensions of the organisation's culture. Organisational culture is defined as a solution the company has generated in order to fulfil the perceived demands of its core task. The CAOC-methodology was applied in two case studies, in the Radiation and Nuclear Safety Authority of Finland and in the maintenance unit of Loviisa NPP. The aim of the studies was not only to assess the given culture, but also to give the personnel new concepts and new tools for reflecting on their organisation, their jobs and on appropriate working practices. The CAOC-methodology contributes to the design and redesign of work in complex sociotechnical systems. It strives to enhance organisations' capability to assess their current working practices and the meanings attached to them and compare these to the actual demands of their basic mission and so change unadaptive practices. (orig.)

Methodology for considering environments and culture in developing information security systems

OpenAIRE

Mwakalinga, G Jeffy; Kowalski, Stewart; Yngström, Louise

2009-01-01

In this paper, we describe a methodology for considering culture of users and environments when developing information security systems. We discuss the problem of how researchers and developers of security for information systems have had difficulties in considering culture of users and environments when they develop information security systems. This has created environments where people serve technology instead of technology serving people. Users have been considered just as any other compo...

Process evaluations in neurological rehabilitation: a mixed-evidence systematic review and recommendations for future research.

Science.gov (United States)

Masterson-Algar, Patricia; Burton, Christopher R; Rycroft-Malone, Jo

2016-11-08

To systematically review how process evaluations are currently designed, what methodologies are used and how are they developed alongside or within neurological rehabilitation trials. This mixed-methods systematic review had two evidence streams: stream I, studies reporting process evaluations alongside neurorehabilitation trials research and stream II, methodological guidance on process evaluation design and methodology. A search strategy was designed for each evidence stream. Data regarding process evaluation core concepts and design issues were extracted using a bespoke template. Evidence from both streams was analysed separately and then synthesised in a final overarching synthesis proposing a number of recommendations for future research. A total of 124 process evaluation studies, reporting on 106 interventions, were included in stream I evidence. 30 studies were included as stream II evidence. Synthesis 1 produced 9 themes, and synthesis 2 identified a total of 8 recommendations for process evaluation research. The overall synthesis resulted in 57 'synthesis recommendations' about process evaluation methodology grouped into 9 research areas, including the use of theory, the investigation of context, intervention staff characteristics and the delivery of the trial intervention. There remains no consensus regarding process evaluation terminology within the neurological rehabilitation field. There is a need for process evaluations to address the nature and influence of context over time. Process evaluations should clearly describe what intervention staff bring to a trial, including skills and experience prior to joining the research. Process evaluations should monitor intervention staff's learning effects and the possible impact that these may have on trial outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Systematic methodological review: developing a framework for a qualitative semi-structured interview guide.

Science.gov (United States)

Kallio, Hanna; Pietilä, Anna-Maija; Johnson, Martin; Kangasniemi, Mari

2016-12-01

To produce a framework for the development of a qualitative semi-structured interview guide. Rigorous data collection procedures fundamentally influence the results of studies. The semi-structured interview is a common data collection method, but methodological research on the development of a semi-structured interview guide is sparse. Systematic methodological review. We searched PubMed, CINAHL, Scopus and Web of Science for methodological papers on semi-structured interview guides from October 2004-September 2014. Having examined 2,703 titles and abstracts and 21 full texts, we finally selected 10 papers. We analysed the data using the qualitative content analysis method. Our analysis resulted in new synthesized knowledge on the development of a semi-structured interview guide, including five phases: (1) identifying the prerequisites for using semi-structured interviews; (2) retrieving and using previous knowledge; (3) formulating the preliminary semi-structured interview guide; (4) pilot testing the guide; and (5) presenting the complete semi-structured interview guide. Rigorous development of a qualitative semi-structured interview guide contributes to the objectivity and trustworthiness of studies and makes the results more plausible. Researchers should consider using this five-step process to develop a semi-structured interview guide and justify the decisions made during it. © 2016 John Wiley & Sons Ltd.

Changing expectations: Do journals drive methodological changes? Should they?

Science.gov (United States)

Erb, Hollis N

2010-12-01

"Yes" to both questions. I believe that journals can, should, and do drive methodological changes. However, it is not a unilateral responsibility; authors and teachers also must be drivers of improvements. There are multiple ways that journals drive change: Journals promote new concepts and methods in study design and data analysis by publishing them-giving the new methodologies voice and credibility after peer review. Journals further promote new methodologies by asking authors to adhere to the newest appropriate best methods (relying heavily on advice from reviewers). Journals enforce methodological quality standards through their review processes and by asking authors to adhere to recognized, published guidelines for the information that should be included in manuscripts. I summarized what I consider to be the key features of 15 of the statements of guidelines. Now that good guidelines (e.g., CONSORT, STROBE, STARD, PRISMA, REFLECT-LFS) are available on so many topics, I recommend that we require these as minimum reporting standards so that the information content of papers is forced to be high. The guidelines should make is easier for reviewers and editors to make sure nothing was overlooked in the review process, and make it easier for authors to see the minimum standards and their justifications. It should be a positively reinforcing system. Authors develop these new concepts and methods, use the guidelines, and cooperate in good faith with the journals to which their manuscripts are submitted. Some authors also become reviewers and further contribute to the process. Good teachers offer the next academic generations both the best current concepts and practices and the understanding that improvements will come along and must be considered for adoption. I made six recommendations regarding reporting guidelines. Copyright © 2010 Elsevier B.V. All rights reserved.

Development of a consistent Monte Carlo-deterministic transport methodology based on the method of characteristics and MCNP5

International Nuclear Information System (INIS)

Karriem, Z.; Ivanov, K.; Zamonsky, O.

2011-01-01

This paper presents work that has been performed to develop an integrated Monte Carlo- Deterministic transport methodology in which the two methods make use of exactly the same general geometry and multigroup nuclear data. The envisioned application of this methodology is in reactor lattice physics methods development and shielding calculations. The methodology will be based on the Method of Long Characteristics (MOC) and the Monte Carlo N-Particle Transport code MCNP5. Important initial developments pertaining to ray tracing and the development of an MOC flux solver for the proposed methodology are described. Results showing the viability of the methodology are presented for two 2-D general geometry transport problems. The essential developments presented is the use of MCNP as geometry construction and ray tracing tool for the MOC, verification of the ray tracing indexing scheme that was developed to represent the MCNP geometry in the MOC and the verification of the prototype 2-D MOC flux solver. (author)

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users

Directory of Open Access Journals (Sweden)

Logesh Ravi

2016-01-01

Full Text Available Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented.

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users

Science.gov (United States)

Ravi, Logesh; Vairavasundaram, Subramaniyaswamy

2016-01-01

Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW) and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented. PMID:27069468

Latest developments on safety analysis methodologies at the Juzbado plant

International Nuclear Information System (INIS)

Zurron-Cifuentes, Oscar; Ortiz-Trujillo, Diego; Blanco-Fernandez, Luis A.

2010-01-01

Over the last few years the Juzbado Plant has developed and implemented several analysis methodologies to cope with specific issues regarding safety management. This paper describes the three most outstanding of them, so as to say, the Integrated Safety Analysis (ISA) project, the adaptation of the MARSSIM methodology for characterization surveys of radioactive contamination spots, and the programme for the Systematic Review of the Operational Conditions of the Safety Systems (SROCSS). Several reasons motivated the decision to implement such methodologies, such as Regulator requirements, operational experience and of course, the strong commitment of ENUSA to maintain the highest standards of nuclear industry on all the safety relevant activities. In this context, since 2004 ENUSA is undertaking the ISA project, which consists on a systematic examination of plant's processes, equipment, structures and personnel activities to ensure that all relevant hazards that could result in unacceptable consequences have been adequately evaluated and the appropriate protective measures have been identified. On the other hand and within the framework of a current programme to ensure the absence of radioactive contamination spots on unintended areas, the MARSSIM methodology is being applied as a tool to conduct the radiation surveys and investigation of potentially contaminated areas. Finally, the SROCSS programme was initiated earlier this year 2009 to assess the actual operating conditions of all the systems with safety relevance, aiming to identify either potential non-conformities or areas for improvement in order to ensure their high performance after years of operation. The following paragraphs describe the key points related to these three methodologies as well as an outline of the results obtained so far. (authors)

Revised FAO methodology for crop-water requirements

International Nuclear Information System (INIS)

Smith, M.; Allen, R.; Pereira, L.

1998-01-01

In the early 1970s, the Food and Agriculture Organization of the United Nations (FAO) developed a practical procedure to estimate crop-water requirements that has become a widely accepted standard, in particular for irrigation studies. Since its publication as FAO Irrigation and Drainage Paper, new concepts and advances in research have revealed shortcomings in the methodology and made necessary a review and revision. A consultation of experts organized by FAO recommended the adoption of the Penman-Monteith combination method as a new standard for reference evapotranspiration, and advised on procedures for calculation of the various parameters. By defining the reference crop as hypothetical with an assumed height of 0.12 m, a surface resistance of 70 s m -1 and an albedo of 0.23, closely resembling the evaporation of an extensive surface of actively growing and adequately watered green grass of uniform height, the FAO Penman-Monteith method was developed, overcoming previous deficiencies and providing values more consistent with actual crop-water-use data worldwide. Furthermore, recommendations have been developed for the use of the FAO Penman-Monteith method with limited climatic data, largely eliminating the need for any other reference evapotranspiration methods and creating a consistent and transparent basis for a globally valid standard for crop-water-requirement calculations. (author)

Summary of FY-1978 consultation input for Scenario Methodology Development

International Nuclear Information System (INIS)

Scott, B.L.; Benson, G.L.; Craig, R.A.; Harwell, M.A.

1979-11-01

The Scenario Methodology Development task is concerned with evaluating the geologic system surrounding an underground repository and describing the phenomena (volcanic, seismic, meteorite, hydrologic, tectonic, climate, etc.) which could perturb the system and possibly cause loss of repository integrity. This document includes 14 individual papers. Separate abstracts were prepared for all 14 papers

To What Extent Does Current Scientific Research and Textbook Content Align? A Methodology and Case Study

Science.gov (United States)

Bierema, Andrea M.-K.; Schwartz, Renee S.; Gill, Sharon A.

2017-01-01

Recent calls for reform in education recommend science curricula to be based on central ideas instead of a larger number of topics and for alignment between current scientific research and curricula. Because alignment is rarely studied, especially for central ideas, we developed a methodology to discover the extent of alignment between primary…

Methodological quality of systematic reviews on influenza vaccination.

Science.gov (United States)

Remschmidt, Cornelius; Wichmann, Ole; Harder, Thomas

2014-03-26

There is a growing body of evidence on the risks and benefits of influenza vaccination in various target groups. Systematic reviews are of particular importance for policy decisions. However, their methodological quality can vary considerably. To investigate the methodological quality of systematic reviews on influenza vaccination (efficacy, effectiveness, safety) and to identify influencing factors. A systematic literature search on systematic reviews on influenza vaccination was performed, using MEDLINE, EMBASE and three additional databases (1990-2013). Review characteristics were extracted and the methodological quality of the reviews was evaluated using the assessment of multiple systematic reviews (AMSTAR) tool. U-test, Kruskal-Wallis test, chi-square test, and multivariable linear regression analysis were used to assess the influence of review characteristics on AMSTAR-score. Fourty-six systematic reviews fulfilled the inclusion criteria. Average methodological quality was high (median AMSTAR-score: 8), but variability was large (AMSTAR range: 0-11). Quality did not differ significantly according to vaccination target group. Cochrane reviews had higher methodological quality than non-Cochrane reviews (p=0.001). Detailed analysis showed that this was due to better study selection and data extraction, inclusion of unpublished studies, and better reporting of study characteristics (all p<0.05). In the adjusted analysis, no other factor, including industry sponsorship or journal impact factor had an influence on AMSTAR score. Systematic reviews on influenza vaccination showed large differences regarding their methodological quality. Reviews conducted by the Cochrane collaboration were of higher quality than others. When using systematic reviews to guide the development of vaccination recommendations, the methodological quality of a review in addition to its content should be considered. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a flight software testing methodology

Science.gov (United States)

Mccluskey, E. J.; Andrews, D. M.

1985-01-01

The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada.

ESPEN endorsed recommendations. Definition and classification of intestinal failure in adults

DEFF Research Database (Denmark)

Pironi, Loris; Arends, Jann; Baxter, Janet

2015-01-01

BACKGROUND & AIMS: Intestinal failure (IF) is not included in the list of PubMed Mesh terms, as failure is the term describing a state of non functioning of other organs, and as such is not well recognized. No scientific society has yet devised a formal definition and classification of IF....... The European Society for Clinical Nutrition and Metabolism guideline committee endorsed its "home artificial nutrition and chronic IF" and "acute IF" special interest groups to write recommendations on these issues. METHODS: After a Medline Search, in December 2013, for "intestinal failure" and "review......"[Publication Type], the project was developed using the Delphi round methodology. The final consensus was reached on March 2014, after 5 Delphi rounds and two live meetings. RESULTS: The recommendations comprise the definition of IF, a functional and a pathophysiological classification for both acute and chronic...

Pan-oral dose assessment: a comparative report of methodologies

International Nuclear Information System (INIS)

Shafford, J.; Pryor, M.; Hollaway, P.; Peet, D.; Oduko, J.

2015-01-01

National guidance from the Institute of Physics and Engineering in Medicine (IPEM Report 91) currently recommends that the patient dose for a pan-oral X-ray unit is measured as dose area product (DAP) replacing dose width product described in earlier guidance. An investigation identifying different methods available to carry out this measurement has been undertaken and errors in the methodologies analysed. It has been shown that there may be up to a 30 % variation in DAP measurement between methods. This paper recommends that where possible a DAP meter is used to measure the dose-area product from a pan-oral X-ray unit to give a direct DAP measurement. However, by using a solid-state dose measurement and film/ruler to calculate DAP the authors have established a conversion factor of 1.4. It is strongly recommended that wherever a DAP value is quoted the methodology used to obtain that value is also reported. (authors)

Methodology, status and plans for development and assessment of Cathare code

Energy Technology Data Exchange (ETDEWEB)

Bestion, D.; Barre, F.; Faydide, B. [CEA - Grenoble (France)

1997-07-01

This paper presents the methodology, status and plans for the development, assessment and uncertainty evaluation of the Cathare code. Cathare is a thermalhydraulic code developed by CEA (DRN), IPSN, EDF and FRAMATOME for PWR safety analysis. First, the status of the code development and assessment is presented. The general strategy used for the development and the assessment of the code is presented. Analytical experiments with separate effect tests, and component tests are used for the development and the validation of closure laws. Successive Revisions of constitutive laws are implemented in successive Versions of the code and assessed. System tests or integral tests are used to validate the general consistency of the Revision. Each delivery of a code Version + Revision is fully assessed and documented. A methodology is being developed to determine the uncertainty on all constitutive laws of the code using calculations of many analytical tests and applying the Discrete Adjoint Sensitivity Method (DASM). At last, the plans for the future developments of the code are presented. They concern the optimization of the code performance through parallel computing - the code will be used for real time full scope plant simulators - the coupling with many other codes (neutronic codes, severe accident codes), the application of the code for containment thermalhydraulics. Also, physical improvements are required in the field of low pressure transients and in the modeling for the 3-D model.

Recommended methods for range-wide monitoring of prairie dogs in the United States

Science.gov (United States)

McDonald, Lyman L.; Stanley, Thomas R.; Otis, David L.; Biggins, Dean E.; Stevens, Patricia D.; Koprowski, John L.; Ballard, Warren

2011-01-01

One of the greatest challenges for conserving grassland, prairie scrub, and shrub-steppe ecosystems is maintaining prairie dog populations across the landscape. Of the four species of prairie dogs found in the United States, the Utah prairie dog (Cynomys parvidens) is listed under the Endangered Species Act (ESA) as threatened, the Gunnison's prairie dog (C. gunnisoni) is a candidate for listing in a portion of its range, and the black-tailed prairie dog (C. ludovicianus) and white-tailed prairie dog (C. leucurus) have each been petitioned for listing at least once in recent history. Although the U.S. Fish and Wildlife Service (USFWS) determined listing is not warranted for either the black-tailed prairie dog or white-tailed prairie dog, the petitions and associated reviews demonstrated the need for the States to monitor and manage for self-sustaining populations. In response to these findings, a multi-State conservation effort was initiated for the nonlisted species which included the following proposed actions: (1) completing an assessment of each prairie dog species in each State, (2) developing a range-wide monitoring protocol for each species using a statistically valid sampling procedure that would allow comparable analyses across States, and (3) monitoring prairie dog status every 3-5 years depending upon the species. To date, each State has completed an assessment and currently is monitoring prairie dog status; however, for some species, the inconsistency in survey methodology has made it difficult to compare data year-to-year or State-to-State. At the Prairie Dog Conservation Team meeting held in November 2008, there was discussion regarding the use of different methods to survey prairie dogs. A recommendation from this meeting was to convene a panel in a workshop-type forum and have the panel review the different methods being used and provide recommendations for range-wide monitoring protocols for each species of prairie dog. Consequently, the Western

Classification of Recommender Expertise in the Wikipedia Recommender System

DEFF Research Database (Denmark)

Jensen, Christian D.; Pilkauskas, Povilas; Lefévre, Thomas

2011-01-01

to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

Classification of Recommender Expertise in the Wikipedia Recommender System

DEFF Research Database (Denmark)

Jensen, Christian D.; Pilkauskas, Povilas; Lefevre, Thomas

2011-01-01

to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles "which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

Developing recommendations to improve the quality of diabetes care in Ireland: a policy analysis.

LENUS (Irish Health Repository)

Mc Hugh, Sheena M

2014-09-01

In 2006, the Health Service Executive (HSE) in Ireland established an Expert Advisory Group (EAG) for Diabetes, to act as its main source of operational policy and strategic advice for this chronic condition. The process was heralded as the starting point for the development of formal chronic disease management programmes. Although recommendations were published in 2008, implementation did not proceed as expected. Our aim was to examine the development of recommendations by the EAG as an instrumental case study of the policy formulation process, in the context of a health system undergoing organisational and financial upheaval.

Application of Bow-tie methodology to improve patient safety.

Science.gov (United States)

Abdi, Zhaleh; Ravaghi, Hamid; Abbasi, Mohsen; Delgoshaei, Bahram; Esfandiari, Somayeh

2016-05-09

Purpose - The purpose of this paper is to apply Bow-tie methodology, a proactive risk assessment technique based on systemic approach, for prospective analysis of the risks threatening patient safety in intensive care unit (ICU). Design/methodology/approach - Bow-tie methodology was used to manage clinical risks threatening patient safety by a multidisciplinary team in the ICU. The Bow-tie analysis was conducted on incidents related to high-alert medications, ventilator associated pneumonia, catheter-related blood stream infection, urinary tract infection, and unwanted extubation. Findings - In total, 48 potential adverse events were analysed. The causal factors were identified and classified into relevant categories. The number and effectiveness of existing preventive and protective barriers were examined for each potential adverse event. The adverse events were evaluated according to the risk criteria and a set of interventions were proposed with the aim of improving the existing barriers or implementing new barriers. A number of recommendations were implemented in the ICU, while considering their feasibility. Originality/value - The application of Bow-tie methodology led to practical recommendations to eliminate or control the hazards identified. It also contributed to better understanding of hazard prevention and protection required for safe operations in clinical settings.

Development of extreme rainfall PRA methodology for sodium-cooled fast reactor

International Nuclear Information System (INIS)

Nishino, Hiroyuki; Kurisaka, Kenichi; Yamano, Hidemasa

2016-01-01

The objective of this study is to develop a probabilistic risk assessment (PRA) methodology for extreme rainfall with focusing on decay heat removal system of a sodium-cooled fast reactor. For the extreme rainfall, annual excess probability depending on the hazard intensity was statistically estimated based on meteorological data. To identify core damage sequence, event trees were developed by assuming scenarios that structures, systems and components (SSCs) important to safety are flooded with rainwater coming into the buildings through gaps in the doors and the SSCs fail when the level of rainwater on the ground or on the roof of the building becomes higher than thresholds of doors on first floor or on the roof during the rainfall. To estimate the failure probability of the SSCs, the level of water rise was estimated by comparing the difference between precipitation and drainage capacity. By combining annual excess probability and the failure probability of SSCs, the event trees led to quantification of core damage frequency, and therefore the PRA methodology for rainfall was developed. (author)

Clinical Studies of Biofield Therapies: Summary, Methodological Challenges, and Recommendations

Science.gov (United States)

Hammerschlag, Richard; Mills, Paul; Cohen, Lorenzo; Krieger, Richard; Vieten, Cassandra; Lutgendorf, Susan

2015-01-01

Biofield therapies are noninvasive therapies in which the practitioner explicitly works with a client's biofield (interacting fields of energy and information that surround living systems) to stimulate healing responses in patients. While the practice of biofield therapies has existed in Eastern and Western cultures for thousands of years, empirical research on the effectiveness of biofield therapies is still relatively nascent. In this article, we provide a summary of the state of the evidence for biofield therapies for a number of different clinical conditions. We note specific methodological issues for research in biofield therapies that need to be addressed (including practitioner-based, outcomes-based, and research design considerations), as well as provide a list of suggested next steps for biofield researchers to consider. PMID:26665043

Consensus Statement of the American Academy of Sleep Medicine on the Recommended Amount of Sleep for Healthy Children: Methodology and Discussion

OpenAIRE

Paruthi, Shalini; Brooks, Lee J.; D'Ambrosio, Carolyn; Hall, Wendy A.; Kotagal, Suresh; Lloyd, Robin M.; Malow, Beth A.; Maski, Kiran; Nichols, Cynthia; Quan, Stuart F.; Rosen, Carol L.; Troester, Matthew M.; Wise, Merrill S.

2016-01-01

Members of the American Academy of Sleep Medicine developed consensus recommendations for the amount of sleep needed to promote optimal health in children and adolescents using a modified RAND Appropriateness Method. After review of 864 published articles, the following sleep durations are recommended: Infants 4 months to 12 months should sleep 12 to 16 hours per 24 hours (including naps) on a regular basis to promote optimal health. Children 1 to 2 years of age should sleep 11 to 14 hours pe...

U.S. Geological Survey Methodology Development for Ecological Carbon Assessment and Monitoring

Science.gov (United States)

Zhu, Zhi-Liang; Stackpoole, S.M.

2009-01-01

Ecological carbon sequestration refers to transfer and storage of atmospheric carbon in vegetation, soils, and aquatic environments to help offset the net increase from carbon emissions. Understanding capacities, associated opportunities, and risks of vegetated ecosystems to sequester carbon provides science information to support formulation of policies governing climate change mitigation, adaptation, and land-management strategies. Section 712 of the Energy Independence and Security Act (EISA) of 2007 mandates the Department of the Interior to develop a methodology and assess the capacity of our nation's ecosystems for ecological carbon sequestration and greenhouse gas (GHG) flux mitigation. The U.S. Geological Survey (USGS) LandCarbon Project is responding to the Department of Interior's request to develop a methodology that meets specific EISA requirements.

Development and demonstration of a validation methodology for vehicle lateral dynamics simulation models

Energy Technology Data Exchange (ETDEWEB)

Kutluay, Emir

2013-02-01

In this thesis a validation methodology to be used in the assessment of the vehicle dynamics simulation models is presented. Simulation of vehicle dynamics is used to estimate the dynamic responses of existing or proposed vehicles and has a wide array of applications in the development of vehicle technologies. Although simulation environments, measurement tools and mathematical theories on vehicle dynamics are well established, the methodical link between the experimental test data and validity analysis of the simulation model is still lacking. The developed validation paradigm has a top-down approach to the problem. It is ascertained that vehicle dynamics simulation models can only be validated using test maneuvers although they are aimed for real world maneuvers. Test maneuvers are determined according to the requirements of the real event at the start of the model development project and data handling techniques, validation metrics and criteria are declared for each of the selected maneuvers. If the simulation results satisfy these criteria, then the simulation is deemed ''not invalid''. If the simulation model fails to meet the criteria, the model is deemed invalid, and model iteration should be performed. The results are analyzed to determine if the results indicate a modeling error or a modeling inadequacy; and if a conditional validity in terms of system variables can be defined. Three test cases are used to demonstrate the application of the methodology. The developed methodology successfully identified the shortcomings of the tested simulation model, and defined the limits of application. The tested simulation model is found to be acceptable but valid only in a certain dynamical range. Several insights for the deficiencies of the model are reported in the analysis but the iteration step of the methodology is not demonstrated. Utilizing the proposed methodology will help to achieve more time and cost efficient simulation projects with

Methodology to evaluate the insecticide potential of forest tree species

International Nuclear Information System (INIS)

Morales Soto, Leon; Garcia P, Carlos Mario

2000-01-01

The flora diversity of Colombia has an enormous potential in the rational use of its forest resources. Trees with biocidal effects to control pests and diseases need to be investigated. The objective of this research was to develop a methodology with low costs, easy application and quick results. The methodology employed was as follows: selection of tree species based on bibliography, ancestral reports and personal observations. The process was as follows: field collection of plants, preparation of plants extracts and test with Artemia salina Leach to detect biological activity of the extracts using LC50. Bioassays with those extract more promising (LC50 less than 1000 ppm) Determination of active compounds. The methodology was employed with 5 forest tree species: guarea guidonia (L) Sleumer and trichia hirta L. (Meliaceae), Machaerium Moritzianum Benth. (Fabaceae), Swinglea glutinosa Merrill (rutaceae) and Mammea americana L. (Clusiaceae). Using Artemia salina Leach as indicator of biocidal potential, two species were selected as the most promising, those were: Swinglea glutinosa Merril and Machaerium moritzianum Benth. In addition bioassays were made to evaluate fagoinhibition on Atta cephalotes (L.) (Hym: Formicidae) and control of Alconeura. This methodology is recommended for this kind of research

Development and Current Status of Skull-Image Superimposition - Methodology and Instrumentation.

Science.gov (United States)

Lan, Y

1992-12-01

This article presents a review of the literature and an evaluation on the development and application of skull-image superimposition technology - both instrumentation and methodology - contributed by a number of scholars since 1935. Along with a comparison of the methodologies involved in the two superimposition techniques - photographic and video - the author characterized the techniques in action and the recent advances in computer image superimposition processing technology. The major disadvantage of conventional approaches is its relying on subjective interpretation. Through painstaking comparison and analysis, computer image processing technology can make more conclusive identifications by direct testing and evaluating the various programmed indices. Copyright © 1992 Central Police University.

The SIMRAND methodology - Simulation of Research and Development Projects

Science.gov (United States)

Miles, R. F., Jr.

1984-01-01

In research and development projects, a commonly occurring management decision is concerned with the optimum allocation of resources to achieve the project goals. Because of resource constraints, management has to make a decision regarding the set of proposed systems or tasks which should be undertaken. SIMRAND (Simulation of Research and Development Projects) is a methodology which was developed for aiding management in this decision. Attention is given to a problem description, aspects of model formulation, the reduction phase of the model solution, the simulation phase, and the evaluation phase. The implementation of the considered approach is illustrated with the aid of an example which involves a simplified network of the type used to determine the price of silicon solar cells.

A review of the implications of sour gas setbacks on the ability to develop property : public safety and sour gas recommendation 53

International Nuclear Information System (INIS)

2005-09-01

All sour gas facilities in Alberta have a required setback, which is the minimum distance that must be maintained between the energy facility and a dwelling, rural housing development, urban centre or public facility. The size of the setback depends on the classification levels of the sour gas facilities. This paper reviewed the economic implications of sour gas setback restrictions for landowners with reference to Recommendation 53. The methodology of the study included a telephone and electronic mail survey to prequalify municipalities, cities and towns located in the sour gas producing regions of Alberta and the selection of 11 cases for further detailed analysis. The findings of the survey and case studies were then used to examine whether landowners were treated fairly in cases where a setback impact occurred. The frequency of setback incidents was described as common by 13 jurisdictions, occasional by 33 jurisdictions and as emerging by 30 jurisdictions. Results indicated that impacts on property development due to sour gas setbacks were widespread across the province. Observed mitigation measures included the modification of development plans by landowners to avoid setback restrictions; encouraging land development proposals away from areas known to have sour gas activity; and the oil and gas industry working with landowners to locate proposed facilities in order to minimize setback restrictions. Results of the survey suggested that ineffective communication was the predominant factor leading to conflicts, particularly when parties were not familiar with setback requirements or the implications for property development. It was suggested that policy makers should aim to reduce the number of conflicts between sour gas setbacks and property development. Recommendations to improve communication included closing gaps in regulations, processes and practices; and reducing surface and subsurface interface conflicts. 9 refs., 1 tab., 4 figs

Towards a coherent global framework for health financing: recommendations and recent developments.

Science.gov (United States)

Ottersen, Trygve; Elovainio, Riku; Evans, David B; McCoy, David; Mcintyre, Di; Meheus, Filip; Moon, Suerie; Ooms, Gorik; Røttingen, John-Arne

2017-04-01

The articles in this special issue have demonstrated how unprecedented transitions have come with both challenges and opportunities for health financing. Against the background of these challenges and opportunities, the Working Group on Health Financing at the Chatham House Centre on Global Health Security laid out, in 2014, a set of policy responses encapsulated in 20 recommendations for how to make progress towards a coherent global framework for health financing. These recommendations pertain to domestic financing of national health systems, global public goods for health, external financing for national health systems and the cross-cutting issues of accountability and agreement on a new global framework. Since the Working Group concluded its work, multiple events have reinforced the group's recommendations. Among these are the agreement on the Addis Ababa Action Agenda, the adoption of the Sustainable Development Goals, the outbreak of Ebola in West Africa and the release of the Panama Papers. These events also represent new stepping stones towards a new global framework.

DTU climate change technologies. Recommendations on accelerated development and deployment of climate change technologies

Energy Technology Data Exchange (ETDEWEB)

Larsen, Hans; Halsnaes, K [Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, System Analysis Div., Roskilde (Denmark); Nielsen, Niels Axel; Moeller, J S; Hansen, Jakob Fritz; Froekjaer Strand, I [Technical Univ. of Denmark, Kgs. Lyngby (Denmark)

2009-09-15

During 2009, the Technical University of Denmark (DTU) has held a number of international workshops for climate change. Participants came from industry, research institutions and government. The workshops focused on sustainable energy systems and climate change adaptation. The summary of conclusions and recommendations from the workshops constitutes a comprehensive set of technology tracks and recommended actions towards accelerated development and deployment of technology within these two key areas. The workshop process has led to three main conclusions. A. Radical changes are needed to develop sustainable energy systems. B. Tools and processes that climate-proof societal planning and management are needed in order to adapt to climate change. C. Partnerships concerning innovation and deployment (research, development and deployment) are required to meet time constraints.

MARA - methodology to analyze environmental risks; MARA - elaboracao de metodologia para analise dos riscos ambientais

Energy Technology Data Exchange (ETDEWEB)

Mendes, Renato F; Yogui, Regiane [PETROBRAS, Rio de Janeiro, RJ (Brazil); Minniti, Vivienne [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Setor de Analise de Riscos; Lopes, Carlos F [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Setor de Operacoes de Emergencia; Milaneli, Joao [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Ubatuba, SP (Brazil). Agencia Ambiental de Ubatuba; Torres, Carlos [TRANSPETRO - PETROBRAS Transportes, Sao Paulo, SP (Brazil). Seguranca, Meio Ambiente e Saude; Rodrigues, Gabriela; Mariz, Eduardo [Consultoria Paulista, SP (Brazil)

2005-07-01

In the oil industry, the environmental impact assessment of an accident is both multi and interdisciplinary and goes through several approaches and depths. Due to the enormous complexity of the environmental analyses issues, mainly for being a science in development and not technological consensus, a macro methodology is presented for the purpose of identify areas that can be impacted by pipeline leakages and recommend improvements are applicable working as a table top response plan. The methodology of the Environmental Risk Mapping-MARA for pipelines rows, describes its concept and justifies the adoption of the environmental mapping during Risk Analyses studies, for PETROBRAS/TRANSPETRO new and existing pipelines. The development of this methodology is justified by the fact that it is a practical tool for identification, analysis and categorization of the more vulnerable environmental elements along a pipeline row and vicinities, during simulated occurrence of accidental spills of hydrocarbons in the environment. This methodology is a tool that allows Environmental Agencies and PETROBRAS a better way to manage in advance the Company emergencies. (author)

Methodology of sustainability accounting

Directory of Open Access Journals (Sweden)

O.H. Sokil

2017-03-01

Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

BMR: Benchmarking Metrics Recommender for Personnel issues in Software Development Projects

Directory of Open Access Journals (Sweden)

Angel Garcia-Crespo

2009-12-01

Full Text Available This paper presents an architecture which applies document similarity measures to the documentation produced during the phases of software development in order to generate recommendations of process and people metrics for similar projects. The application makes a judgment of similarity of the Service Provision Offer (SPO document of a new proposed project to a collection of Project History Documents (PHD, stored in a repository of unstructured texts. The process is carried out in three stages: firstly, clustering of the Offer document with the set of PHDs which are most similar to it; this provides the initial indication of whether similar previous projects exist, and signifies similarity. Secondly, determination of which PHD in the set is most comparable with the Offer document, based on various parameters: project effort, project duration (time, project resources (members/size of team, costs, and sector(s involved, indicating comparability of projects. The comparable parameters are extracted using the GATE Natural Language Processing architecture. Lastly, a recommendation of metrics for the new project is made, which is based on the transferability of the metrics of the most similar and comparable PHD extracted, here referred to as recommendation.

2008 update of standards, options: recommendations for management of patients with salivary gland malignant tumours (excluding lymphoma, sarcoma and melanoma), summary report

International Nuclear Information System (INIS)

Bensadoun, R.J.; Dassonville, O.; Rousmans, S.

2008-01-01

Context: An update of the S.O.R.-C.P.G. for management of patients with salivary gland malignant tumours has been initiated by the French National Federation of Cancer Centres (F.N.C.L.C.C.) in collaboration with French league against cancer, specialists from university or general hospitals and private clinics, and with the French National Cancer Institute. This work performed is based on the methodology developed and used in the 'Standards, Options: Recommendations' program (S.O.R.). Objectives. To update the S.O.R. guideline for the management of patients with salivary gland malignant tumors (excluding lymphoma, sarcoma and melanoma) previously validated in 1997 and 2003. Method: The guideline development process is based on literature review and critical appraisal by a multidisciplinary group of experts. The methodological approach combines systematic review with expert judgement. Recommendations take into account the effectiveness and toxicity of the different therapeutic alternatives and the levels of evidence. Following their development and prior to publication, S.O.R.-guidelines are reviewed by independent practitioners in cancer care delivery. Results: This paper is a summary version of the full clinical practice guideline presenting the updated recommendations. Recommendations on radiotherapy have been updated to underline new Options on more and more accessible emerging techniques including 'intensity-modulated radiotherapy', '3-D conformational radiotherapy', 'Cyber-knife', 'Tomotherapy', 'Proton therapy' and 'particle accelerators producing carbon ions' (e.g. last generation hadron therapy). Therapeutical modalities have also been specified. (authors)

Methodological Grounds of Managing Innovation Development of Restaurants

Directory of Open Access Journals (Sweden)

Naidiuk V. S.

2013-12-01

Full Text Available The goal of the article lies in identification and further development of methodological grounds of managing the innovation development of restaurants. Based on the data of the critical analysis of existing scientific views on interpretation of the essence of the “managing innovation development of an enterprise” notion, the article conducts clarification of this definition. In the result of the study the article builds up a cause-effect diagram of solution of the problem of ensuring efficient management of the innovation development of a restaurant. The article develops a conceptual scheme of development and realisation of the strategy of innovation development in a restaurant. It experimentally confirms the hypothesis of availability of a very strong density of the feedback between resistance to innovation changes and a variable share of qualified personnel that is capable of permanent development (learning and generation of new ideas, in restaurants and builds a model of dependency between them. The prospects of further studies in this direction could become scientific studies directed at development of methodical approaches to identification of the level of innovation potential and assessment of efficiency of managing innovation development of different (by type, class, size, etc. restaurants. The obtained data could also be used for development of a new or improvement of the existing tools of strategic management of innovation development at the micro-level.

Methodologies Developed for EcoCity Related Projects: New Borg El Arab, an Egyptian Case Study

Directory of Open Access Journals (Sweden)

Carmen Antuña-Rozado

2016-08-01

Full Text Available The aim of the methodologies described here is to propose measures and procedures for developing concepts and technological solutions, which are adapted to the local conditions, to build sustainable communities in developing countries and emerging economies. These methodologies are linked to the EcoCity framework outlined by VTT Technical Research Centre of Finland Ltd. for sustainable community and neighbourhood regeneration and development. The framework is the result of a long experience in numerous EcoCity related projects, mainly Nordic and European in scope, which has been reformulated in recent years to respond to the local needs in the previously mentioned countries. There is also a particular emphasis on close collaboration with local partners and major stakeholders. In order to illustrate how these methodologies can support EcoCity concept development and implementation, results from a case study in Egypt will be discussed. The referred case study relates to the transformation of New Borg El Arab (NBC, near Alexandria, into an EcoCity. The viability of the idea was explored making use of different methodologies (Roadmap, Feasibility Study, and Residents Energy Survey and Building Consumption Assessment and considering the Residential, Commercial/Public Facilities, Industrial, Services/Utilities, and Transport sectors.

Conclusions and recommendations

International Nuclear Information System (INIS)

Moore, A.

1996-01-01

This Air Concerted Action successfully developed a standard methodology to help integrate non-food crop production in rural areas with niche energy markets. The project developed and used a common methodology for comparing the costs of different energy crop production and conversion options across the six participating nations. The partners tested the methodology and ran examples in each of the two heat and one liquid biofuel niche markets. The examples demonstrated that at the current crop yields and with the current conversion technology, the delivered heat and liquid fuel from biomass were not competitive with that from fossil fuels, even in the three niche markets. It was confirmed, however, that biomass was important non only as a potential ''clean'' alternative fuel, but as an alternative crop for farmers which could additionally boost employment in rural communities. Following the inclusion of grants, subsidies and co-firing options, the partners tested the extended methodology and then ran another series of examples in the selected niche markets. (Author)

Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio-Inspired Optimization Techniques

Science.gov (United States)

2017-11-01

on Bio -Inspired Optimization Techniques by Canh Ly, Nghia Tran, and Ozlem Kilic Approved for public release; distribution is...Research Laboratory Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques by...SUBTITLE Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques 5a. CONTRACT NUMBER

Supplement to the Disposal Criticality Analysis Methodology

International Nuclear Information System (INIS)

Thomas, D.A.

1999-01-01

The methodology for evaluating criticality potential for high-level radioactive waste and spent nuclear fuel after the repository is sealed and permanently closed is described in the Disposal Criticality Analysis Methodology Topical Report (DOE 1998b). The topical report provides a process for validating various models that are contained in the methodology and states that validation will be performed to support License Application. The Supplement to the Disposal Criticality Analysis Methodology provides a summary of data and analyses that will be used for validating these models and will be included in the model validation reports. The supplement also summarizes the process that will be followed in developing the model validation reports. These reports will satisfy commitments made in the topical report, and thus support the use of the methodology for Site Recommendation and License Application. It is concluded that this report meets the objective of presenting additional information along with references that support the methodology presented in the topical report and can be used both in validation reports and in answering request for additional information received from the Nuclear Regulatory Commission concerning the topical report. The data and analyses summarized in this report and presented in the references are not sufficient to complete a validation report. However, this information will provide a basis for several of the validation reports. Data from several references in this report have been identified with TBV-1349. Release of the TBV governing this data is required prior to its use in quality affecting activities and for use in analyses affecting procurement, construction, or fabrication. Subsequent to the initiation of TBV-1349, DOE issued a concurrence letter (Mellington 1999) approving the request to identify information taken from the references specified in Section 1.4 as accepted data

RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

Energy Technology Data Exchange (ETDEWEB)

Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-03-01

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.

RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

International Nuclear Information System (INIS)

Coleman, Justin Leigh

2016-01-01

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.

Safety-related operator actions: methodology for developing criteria

International Nuclear Information System (INIS)

Kozinsky, E.J.; Gray, L.H.; Beare, A.N.; Barks, D.B.; Gomer, F.E.

1984-03-01

This report presents a methodology for developing criteria for design evaluation of safety-related actions by nuclear power plant reactor operators, and identifies a supporting data base. It is the eleventh and final NUREG/CR Report on the Safety-Related Operator Actions Program, conducted by Oak Ridge National Laboratory for the US Nuclear Regulatory Commission. The operator performance data were developed from training simulator experiments involving operator responses to simulated scenarios of plant disturbances; from field data on events with similar scenarios; and from task analytic data. A conceptual model to integrate the data was developed and a computer simulation of the model was run, using the SAINT modeling language. Proposed is a quantitative predictive model of operator performance, the Operator Personnel Performance Simulation (OPPS) Model, driven by task requirements, information presentation, and system dynamics. The model output, a probability distribution of predicted time to correctly complete safety-related operator actions, provides data for objective evaluation of quantitative design criteria

Critical appraisal of nonrandomized studies-A review of recommended and commonly used tools.

Science.gov (United States)

Quigley, Joan M; Thompson, Juliette C; Halfpenny, Nicholas J; Scott, David A

2018-02-27

When randomized controlled trial data are limited or unavailable, or to supplement randomized controlled trial evidence, health technology assessment (HTA) agencies may rely on systematic reviews of nonrandomized studies (NRSs) for evidence of the effectiveness of health care interventions. NRS designs may introduce considerable bias into systematic reviews, and several methodologies by which to evaluate this risk of bias are available. This study aimed to identify tools commonly used to assess bias in NRS and determine those recommended by HTA bodies. Appraisal tools used in NRS were identified through a targeted search of systematic reviews (January 2013-March 2017; MEDLINE and EMBASE [OVID SP]). Recommendations for the critical appraisal of NRS by expert review groups and HTA bodies were reviewed. From the 686 studies included in the narrative synthesis, 48 critical appraisal tools were identified. Commonly used tools included the Newcastle-Ottawa Scale, the methodological index for NRS, and bespoke appraisal tools. Neither the Cochrane Handbook nor the Centre for Reviews and Dissemination recommends a particular instrument for the assessment of risk of bias in NRS, although Cochrane has recently developed their own NRS critical appraisal tool. Among HTA bodies, only the Canadian Agency for Drugs and Technologies in Health recommends use of a specific critical appraisal tool-SIGN 50 (for cohort or case-control studies). Several criteria including reporting, external validity, confounding, and power were examined. There is no consensus between HTA groups on the preferred appraisal tool. Reviewers should select from a suite of tools on the basis of the design of studies included in their review. © 2018 John Wiley & Sons, Ltd.

Developing and implementing a monitoring programme: recommendations provided by the MODERN project

International Nuclear Information System (INIS)

Mayer, S.; Bergmans, A.; Garcia-Sineriz, J.L.; Breen, B.; Jobmann, M.

2012-01-01

Document available in extended abstract form only. The successful implementation of a repository programme relies on both the technical aspects of a sound safety strategy, and scientific and engineering excellence, as well as on social aspects such as public acceptance. Monitoring has the potential to contribute to both of these aspects and thus to play an important role as national radioactive waste disposal programmes move forward towards safe and accepted implementation of geological disposal. The main goal of the 'Monitoring Developments for Safe Repository Operation and staged Closure' (MoDeRn) Project is to take the state-of-the-art of broadly accepted, main monitoring objectives and to develop these to a level of description that is closer to the actual implementation of monitoring during the staged approach of the disposal process. It should be noted that the MoDeRn project recognizes the diversity of monitoring activities that will be required in a repository, in particular related to operational safety, nuclear safeguards and environmental impact assessment. The projects emphasis, however, is on monitoring conducted to verify expected repository system evolutions - i.e. evolutions of the natural environment and the engineered system - during a phase of progressive construction, operation and closure that may last on the order of a century. This serves the purpose of confirming and possibly enhancing the prior license basis for safety and pre-closure management options. Achieving this goal includes analysis of whether the implementation of a realistic monitoring programme is likely to address expert and lay stakeholder expectations (objectives), to provide an understanding of monitoring activities and available technologies that can be implemented in a repository context (feasibility), and to provide recommendations for related, future stakeholder engagement activities (social acceptance). These are carried out by the 18 project partners representing 12

Design of an Integrated Methodology for Analytical Design of Complex Supply Chains

Directory of Open Access Journals (Sweden)

Shahid Rashid

2012-01-01

Full Text Available A literature review and gap analysis indentifies key limitations of industry best practice when modelling of supply chains. To address these limitations the paper reports on the conception and development of an integrated modelling methodology designed to underpin the analytical design of complex supply chains. The methodology is based upon a systematic deployment of EM, CLD, and SM techniques; the integration of which is achieved via common modelling concepts and decomposition principles. Thereby the methodology facilitates: (i graphical representation and description of key “processing”, “resourcing” and “work flow” properties of supply chain configurations; (ii behavioural exploration of currently configured supply chains, to facilitate reasoning about uncertain demand impacts on supply, make, delivery, and return processes; (iii predictive quantification about relative performances of alternative complex supply chain configurations, including risk assessments. Guidelines for the application of each step of the methodology are described. Also described are recommended data collection methods and expected modelling outcomes for each step. The methodology is being extensively case tested to quantify potential benefits & costs relative to current best industry practice. The paper reflects on preliminary benefits gained during industry based case study modelling and identifies areas of potential improvement.

Development of margin assessment methodology of decay heat removal function against external hazards. (2) Tornado PRA methodology

International Nuclear Information System (INIS)

Nishino, Hiroyuki; Kurisaka, Kenichi; Yamano, Hidemasa

2014-01-01

Probabilistic Risk Assessment (PRA) for external events has been recognized as an important safety assessment method after the TEPCO's Fukushima Daiichi nuclear power station accident. The PRA should be performed not only for earthquake and tsunami which are especially key events in Japan, but also the PRA methodology should be developed for the other external hazards (e.g. tornado). In this study, the methodology was developed for Sodium-cooled Fast Reactors paying attention to that the ambient air is their final heat sink for removing decay heat under accident conditions. First, tornado hazard curve was estimated by using data recorded in Japan. Second, important structures and components for decay heat removal were identified and an event tree resulting in core damage was developed in terms of wind load and missiles (i.e. steel pipes, boards and cars) caused by a tornado. Main damage cause for important structures and components is the missiles and the tornado missiles that can reach those components and structures placed on high elevations were identified, and the failure probabilities of the components and structures against the tornado missiles were calculated as a product of two probabilities: i.e., a probability for the missiles to enter the intake or outtake in the decay heat removal system, and a probability of failure caused by the missile impacts. Finally, the event tree was quantified. As a result, the core damage frequency was enough lower than 10 -10 /ry. (author)

INPRO Methodology to evaluate the Mexico nuclear energy system

International Nuclear Information System (INIS)

Cruz S, R. R.; Martin del C, C.

2016-09-01

The International Atomic Energy Agency has developed the so-called International Project on Fuel Cycles and Innovative Nuclear Reactors (INPRO), in order to make nuclear energy available to meet the energy needs of the 21 century, in a sustainable way. One of the tasks of the project is the evaluation of the nuclear systems, to check whether they meet the objectives of the project and whether they are sustainable. This paper explains the rationale and general characteristics of the project in the evaluation of nuclear energy systems based on the concept of sustainable development. It describes the methodology developed to carry out this evaluation, divided into seven areas, such as economic, environmental, security, etc., which together make up the sustainable development of energy through nuclear systems. The economic area is analyzed and the evaluation criteria and parameters established by INPRO are discussed, in order to evaluate the Mexican nuclear energy system using Nest (software developed within the same project) as a tool to support the economic evaluation of nuclear systems. Based on the energy strategy proposed by the Energy Secretary of the Mexican Government which seeks to reduce the greenhouse gas emissions from the national electricity generation park, two types of reactor of currently available technology (A BWR and AP1000), were compared and these in turn with other alternative energy generation technologies, such as combined cycle, geothermal and wind plants. Also, the results of the application of the INPRO methodology are presented. Finally, the recommendations on actions that could lead the Mexican nuclear energy system towards sustainable development and conclusions on the application of the methodology to the Mexican case are mentioned. (Author)

Methodological and Methodical Principles of the Empirical Study of Spiritual Development of a Personality

Directory of Open Access Journals (Sweden)

Olga Klymyshyn

2017-06-01

Full Text Available The article reveals the essence of the methodological principles of the spiritual development of a personality. The results of the theoretical analysis of psychological content of spirituality from the positions of system and structural approach to studying of a personality, age patterns of the mental personality development, the sacramental nature of human person, mechanisms of human spiritual development are taken into consideration. The interpretation of spirituality and the spiritual development of a personality is given. Initial principles of the organization of the empirical research of the spiritual development of a personality (ontogenetic, sociocultural, self-determination, system are presented. Such parameters of the estimation of a personality’s spiritual development as general index of the development of spiritual potential, indexes of the development of ethical, aesthetical, cognitive, existential components of spirituality, index of religiousness of a personality are described. Methodological support of psychological diagnostic research is defined.

Development of an accident sequence precursor methodology and its application to significant accident precursors

Energy Technology Data Exchange (ETDEWEB)

Jang, Seung Hyun; Park, Sung Hyun; Jae, Moo Sung [Dept. of of Nuclear Engineering, Hanyang University, Seoul (Korea, Republic of)

2017-03-15

The systematic management of plant risk is crucial for enhancing the safety of nuclear power plants and for designing new nuclear power plants. Accident sequence precursor (ASP) analysis may be able to provide risk significance of operational experience by using probabilistic risk assessment to evaluate an operational event quantitatively in terms of its impact on core damage. In this study, an ASP methodology for two operation mode, full power and low power/shutdown operation, has been developed and applied to significant accident precursors that may occur during the operation of nuclear power plants. Two operational events, loss of feedwater and steam generator tube rupture, are identified as ASPs. Therefore, the ASP methodology developed in this study may contribute to identifying plant risk significance as well as to enhancing the safety of nuclear power plants by applying this methodology systematically.

Development of design and analysis methodology for composite bolted joints

Science.gov (United States)

Grant, Peter; Sawicki, Adam

1991-05-01

This paper summarizes work performed to develop composite joint design methodology for use on rotorcraft primary structure, determine joint characteristics which affect joint bearing and bypass strength, and develop analytical methods for predicting the effects of such characteristics in structural joints. Experimental results have shown that bearing-bypass interaction allowables cannot be defined using a single continuous function due to variance of failure modes for different bearing-bypass ratios. Hole wear effects can be significant at moderate stress levels and should be considered in the development of bearing allowables. A computer program has been developed and has successfully predicted bearing-bypass interaction effects for the (0/+/-45/90) family of laminates using filled hole and unnotched test data.

Novel methodology to isolate microplastics from vegetal-rich samples.

Science.gov (United States)

Herrera, Alicia; Garrido-Amador, Paloma; Martínez, Ico; Samper, María Dolores; López-Martínez, Juan; Gómez, May; Packard, Theodore T

2018-04-01

Microplastics are small plastic particles, globally distributed throughout the oceans. To properly study them, all the methodologies for their sampling, extraction, and measurement should be standardized. For heterogeneous samples containing sediments, animal tissues and zooplankton, several procedures have been described. However, definitive methodologies for samples, rich in algae and plant material, have not yet been developed. The aim of this study was to find the best extraction protocol for vegetal-rich samples by comparing the efficacies of five previously described digestion methods, and a novel density separation method. A protocol using 96% ethanol for density separation was better than the five digestion methods tested, even better than using H 2 O 2 digestion. As it was the most efficient, simple, safe and inexpensive method for isolating microplastics from vegetal rich samples, we recommend it as a standard separation method. Copyright © 2018 Elsevier Ltd. All rights reserved.

Bioclim Deliverable D10 - 12: development and application of a methodology for taking climate-driven environmental change into account in performance assessments

International Nuclear Information System (INIS)

2004-01-01

the climate modelling results produced in WP2 and WP3. Within the context of BIOCLIM, WP4 included methodology development and extended the development of illustrative conceptual models of biosphere systems and the transitions between them based on results from WP2 and WP3. This provided an appropriate basis for developing recommendations on how the effects of climate change on the biosphere can be taken into account in PAs, including the advantages/disadvantages and likely viability of potential alternative strategies. However, in order to go beyond this and evaluate which of the alternative methods of taking climate change into account should be preferred in a specific context would require application of the methodology developed under WP4 to proposed facilities at specific sites. It could also require the conceptual models of biosphere system states and transitions to be translated into mathematical models

Accidental safety analysis methodology development in decommission of the nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Park, G. H.; Hwang, J. H.; Jae, M. S.; Seong, J. H.; Shin, S. H.; Cheong, S. J.; Pae, J. H.; Ang, G. R.; Lee, J. U. [Seoul National Univ., Seoul (Korea, Republic of)

2002-03-15

Decontamination and Decommissioning (D and D) of a nuclear reactor cost about 20% of construction expense and production of nuclear wastes during decommissioning makes environmental issues. Decommissioning of a nuclear reactor in Korea is in a just beginning stage, lacking clear standards and regulations for decommissioning. This work accident safety analysis in decommissioning of the nuclear facility can be a solid ground for the standards and regulations. For source term analysis for Kori-1 reactor vessel, MCNP/ORIGEN calculation methodology was applied. The activity of each important nuclide in the vessel was estimated at a time after 2008, the year Kori-1 plant is supposed to be decommissioned. And a methodology for risk analysis assessment in decommissioning was developed.

Recommendations for Writing Case Study Articles for Publication in the "Journal of College Counseling"

Science.gov (United States)

Scholl, Mark B.

2017-01-01

The author presents recommendations for writing case studies for publication in the "Journal of College Counseling." Recommendations fall into 2 categories: (a) ethical considerations and (b) criteria essential to methodological rigor (e.g., Hyett, Kenny, & Dickson-Swift, 2014). The article is intended to guide and encourage…

Research Needs and Challenges from Science to Decision Support. Lesson Learnt from the Development of the International Reference Life Cycle Data System (ILCD Recommendations for Life Cycle Impact Assessment

Directory of Open Access Journals (Sweden)

Serenella Sala

2012-06-01

Full Text Available Environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e., their entire life cycle from “cradle to grave” have to be considered to achieve more sustainable production and consumption patterns. Progress toward environmental sustainability requires enhancing the methodologies for quantitative, integrated environmental assessment and promoting the use of these methodologies in different domains. In the context of Life Cycle Assessment (LCA of products, in recent years, several methodologies have been developed for Life Cycle Impact Assessment (LCIA. The Joint Research Center of the European Commission (EC-JRC led a “science to decision support” process which resulted in the International Reference Life Cycle Data System (ILCD Handbook, providing guidelines to the decision and application of methods for LCIA. The Handbook is the result of a comprehensive process of evaluation and selection of existing methods based on a set of scientific and stakeholder acceptance criteria and involving review and consultation by experts, advisory groups and the public. In this study, we report the main features of the ILCD LCIA recommendation development highlighting relevant issues emerged from this “from science to decision support” process in terms of research needs and challenges for LCIA. Comprehensiveness of the assessment, as well as acceptability and applicability of the scientific developments by the stakeholders, are key elements for the design of new methods and to guarantee the mainstreaming of the sustainability concept.

Developing a Design Methodology for Web 2.0 Mediated Learning

DEFF Research Database (Denmark)

Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or ?Designing for Learning?. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development...... of particular ?mediating design artefacts?. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...

Developing a Design Methodology for Web 2.0 Mediated Learning

DEFF Research Database (Denmark)

Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

2017-01-01

In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or ?Designing for Learning?. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development...... of particular ?mediating design artefacts?. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...

Functional bandage for ankle sprains. Recommendations for nursing

Directory of Open Access Journals (Sweden)

Mª Isabel Arcos Cirauqui

2011-11-01

Full Text Available Three quarters of ankle injuries are diagnosed as sprains. For the most part sprains are caused by a forced inversion movement with involvement of the lateral collateral ligament (LCL. One of the recommended guidelines is immobilization by taping. The aim of this article is to unify the recommendations for nursing, on taping in the treatment of ankle sprains. The methodology used was a literature review, analyzing the information found in books and journals in hospital libraries and nursing databases on the Internet. The main results are a set of guidelines for the most accurate and therapeutic taping.

Development of performance assessment methodology for establishment of quantitative acceptance criteria of near-surface radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Kim, C. R.; Lee, E. Y.; Park, J. W.; Chang, G. M.; Park, H. Y.; Yeom, Y. S. [Korea Hydro and Nuclear Power Co., Ltd., Seoul (Korea, Republic of)

2002-03-15

The contents and the scope of this study are as follows : review of state-of-the-art on the establishment of waste acceptance criteria in foreign near-surface radioactive waste disposal facilities, investigation of radiological assessment methodologies and scenarios, investigation of existing models and computer codes used in performance/safety assessment, development of a performance assessment methodology(draft) to derive quantitatively radionuclide acceptance criteria of domestic near-surface disposal facility, preliminary performance/safety assessment in accordance with the developed methodology.

Development of methodology for evaluating and monitoring steam generator feedwater nozzle cracking in PWRs

International Nuclear Information System (INIS)

Shvarts, S.; Gerber, D.A.; House, K.; Hirschberg, P.

1994-01-01

The objective of this paper is to describe a methodology for evaluating and monitoring steam generator feedwater nozzle cracking in PWR plants. This methodology is based in part on plant test data obtained from a recent Diablo Canyon Power Plant (DCPP) Unit 1 heatup. Temperature sensors installed near the nozzle-to-pipe weld were monitored during the heatup, along with operational parameters such as auxiliary feedwater (AFW) flow rate and steam generator temperature. A thermal stratification load definition was developed from this data. Steady state characteristics of this data were used in a finite element analysis to develop relationship between AFW flow and stratification interface level. Fluctuating characteristics of this data were used to determine transient parameters through the application of a Green's Function approach. The thermal stratification load definition from the test data was used in a three-dimensional thermal stress analysis to determine stress cycling and consequent fatigue damage or crack growth during AFW flow fluctuations. The implementation of the developed methodology in the DCPP and Sequoyah Nuclear Plant (SNP) fatigue monitoring systems is described

Methodology briefing students in the safety on physical education in the gym

Directory of Open Access Journals (Sweden)

N. N. Mukhamediarov

2014-01-01

Full Text Available Purpose : to determine the effective components of the methodology of coaching students on safety on physical education in the gym. Material : in the experiment involved 90 students aged 17-18 years. Results : the method of forming responsible attitude to the basics of safety during physical training in the gym. Developed special funds: lectures, seminars, analysis of articles, diagnostic interviews, questionnaires, analysis of log data of attendance, log injuries. The criteria of formation responsible attitude to physical training. The results of the implementation methodology. Conclusions : proposed method recommend to instruct students on safety. Use the means of forming a responsible attitude to safety during physical training in the gym that will help reduce injuries and improve quality of the physical training at the university.

The Vitiligo Working Group recommendations for narrowband ultraviolet B light phototherapy treatment of vitiligo.

Science.gov (United States)

Mohammad, Tasneem F; Al-Jamal, Mohammed; Hamzavi, Iltefat H; Harris, John E; Leone, Giovanni; Cabrera, Raúl; Lim, Henry W; Pandya, Amit G; Esmat, Samia M

2017-05-01

Treatment of vitiligo with narrowband ultraviolet B light (NBUVB) is an important component of the current standard of care. However, there are no consistent guidelines regarding the dosing and administration of NBUVB in vitiligo, reflected by varied treatment practices around the world. To create phototherapy recommendations to facilitate clinical management and identify areas requiring future research. The Vitiligo Working Group (VWG) Phototherapy Committee addressed 19 questions regarding the administration of phototherapy over 3 conference calls. Members of the Photomedicine Society and a group of phototherapy experts were surveyed regarding their phototherapy practices. Based on comparison and analysis of survey results, expert opinion, and discussion held during conference calls, expert recommendations for the administration of NBUVB phototherapy in vitiligo were created. There were several areas that required further research before final recommendations could be made. In addition, no standardized methodology was used during literature review and to assess the strength of evidence during the development of these recommendations. This set of expert recommendations by the VWG is based on the prescribing practices of phototherapy experts from around the world to create a unified, broadly applicable set of recommendations on the use of NBUVB in vitiligo. Copyright © 2017 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Development of methodologies for coupled water-hammer analysis of piping systems and supports

International Nuclear Information System (INIS)

Kamil, H.; Gantayat, A.; Attia, A.; Goulding, H.

1983-01-01

The paper presents the results of an investigation on the development of methodologies for coupled water-hammer analyses. The study was conducted because the present analytical methods for calculation of loads on piping systems and supports resulting from water-hammer phenomena are overly conservative. This is mainly because the methods do not usually include interaction between the fluid and the piping and thus predict high loads on piping systems and supports. The objective of the investigation presented in this paper was to develop methodologies for coupled water-hammer analyses, including fluid-structure interaction effects, to be able to obtain realistic loads on piping systems and supports, resulting in production of more economical designs. (orig./RW)

Beyond Wishful Thinking: Integrating Consumer Preferences in the Assessment of Dietary Recommendations

Science.gov (United States)

2016-01-01

Convenience, taste, and prices are the main determinants of food choices. Complying with dietary recommendations therefore imposes a “taste cost” on consumers, potentially hindering adoption of those recommendations. The study presents and applies a new methodology, based on economic theory, to quantify this taste cost and assess the health and welfare effects of different dietary recommendations. Then, by comparison of those effects, we identify socially desirable recommendations that are most compatible with consumer preferences (i.e., that best balance health benefits against”taste cost”) and should be prioritized for promotion. The methodology proceeds in three-steps: first, an economic-behavioral model simulates how whole diets would change if consumers complied with dietary recommendations; second, an epidemiological model estimates the number of deaths avoided (DA) due to the dietary change; third, an efficiency analysis weighs the health benefits against the taste and policy costs of each recommendation. The empirical model is calibrated using French data. We find that recommendations to reduce consumption of red meat and soft-drinks, or raise consumption of milk products and fish/seafood impose relatively moderate taste costs. By comparison, recommendations related to F&V consumption and, to a lesser extent, butter/cream/cheese, snacks, and all meats impose larger taste costs on consumers. The F&V recommendation is the costliest for consumers to comply with, but it also reduces diet-related mortality the most, so that a large budget could be allocated to promoting F&V consumption while keeping this policy cost-beneficial. We conclude that promotion of most dietary recommendations improves social welfare. Our framework complements the programming models available in nutrition and public health: those models are best used to identify dietary targets, following which our framework identifies cost-beneficial ways of moving towards those targets. PMID

Beyond Wishful Thinking: Integrating Consumer Preferences in the Assessment of Dietary Recommendations.

Science.gov (United States)

Irz, Xavier; Leroy, Pascal; Réquillart, Vincent; Soler, Louis-Georges

2016-01-01

Convenience, taste, and prices are the main determinants of food choices. Complying with dietary recommendations therefore imposes a "taste cost" on consumers, potentially hindering adoption of those recommendations. The study presents and applies a new methodology, based on economic theory, to quantify this taste cost and assess the health and welfare effects of different dietary recommendations. Then, by comparison of those effects, we identify socially desirable recommendations that are most compatible with consumer preferences (i.e., that best balance health benefits against"taste cost") and should be prioritized for promotion. The methodology proceeds in three-steps: first, an economic-behavioral model simulates how whole diets would change if consumers complied with dietary recommendations; second, an epidemiological model estimates the number of deaths avoided (DA) due to the dietary change; third, an efficiency analysis weighs the health benefits against the taste and policy costs of each recommendation. The empirical model is calibrated using French data. We find that recommendations to reduce consumption of red meat and soft-drinks, or raise consumption of milk products and fish/seafood impose relatively moderate taste costs. By comparison, recommendations related to F&V consumption and, to a lesser extent, butter/cream/cheese, snacks, and all meats impose larger taste costs on consumers. The F&V recommendation is the costliest for consumers to comply with, but it also reduces diet-related mortality the most, so that a large budget could be allocated to promoting F&V consumption while keeping this policy cost-beneficial. We conclude that promotion of most dietary recommendations improves social welfare. Our framework complements the programming models available in nutrition and public health: those models are best used to identify dietary targets, following which our framework identifies cost-beneficial ways of moving towards those targets.

Beyond Wishful Thinking: Integrating Consumer Preferences in the Assessment of Dietary Recommendations.

Directory of Open Access Journals (Sweden)

Xavier Irz

Full Text Available Convenience, taste, and prices are the main determinants of food choices. Complying with dietary recommendations therefore imposes a "taste cost" on consumers, potentially hindering adoption of those recommendations. The study presents and applies a new methodology, based on economic theory, to quantify this taste cost and assess the health and welfare effects of different dietary recommendations. Then, by comparison of those effects, we identify socially desirable recommendations that are most compatible with consumer preferences (i.e., that best balance health benefits against"taste cost" and should be prioritized for promotion. The methodology proceeds in three-steps: first, an economic-behavioral model simulates how whole diets would change if consumers complied with dietary recommendations; second, an epidemiological model estimates the number of deaths avoided (DA due to the dietary change; third, an efficiency analysis weighs the health benefits against the taste and policy costs of each recommendation. The empirical model is calibrated using French data. We find that recommendations to reduce consumption of red meat and soft-drinks, or raise consumption of milk products and fish/seafood impose relatively moderate taste costs. By comparison, recommendations related to F&V consumption and, to a lesser extent, butter/cream/cheese, snacks, and all meats impose larger taste costs on consumers. The F&V recommendation is the costliest for consumers to comply with, but it also reduces diet-related mortality the most, so that a large budget could be allocated to promoting F&V consumption while keeping this policy cost-beneficial. We conclude that promotion of most dietary recommendations improves social welfare. Our framework complements the programming models available in nutrition and public health: those models are best used to identify dietary targets, following which our framework identifies cost-beneficial ways of moving towards those

Methodological Issues in Questionnaire Design.

Science.gov (United States)

Song, Youngshin; Son, Youn Jung; Oh, Doonam

2015-06-01

The process of designing a questionnaire is complicated. Many questionnaires on nursing phenomena have been developed and used by nursing researchers. The purpose of this paper was to discuss questionnaire design and factors that should be considered when using existing scales. Methodological issues were discussed, such as factors in the design of questions, steps in developing questionnaires, wording and formatting methods for items, and administrations methods. How to use existing scales, how to facilitate cultural adaptation, and how to prevent socially desirable responding were discussed. Moreover, the triangulation method in questionnaire development was introduced. Steps were recommended for designing questions such as appropriately operationalizing key concepts for the target population, clearly formatting response options, generating items and confirming final items through face or content validity, sufficiently piloting the questionnaire using item analysis, demonstrating reliability and validity, finalizing the scale, and training the administrator. Psychometric properties and cultural equivalence should be evaluated prior to administration when using an existing questionnaire and performing cultural adaptation. In the context of well-defined nursing phenomena, logical and systematic methods will contribute to the development of simple and precise questionnaires.

Influence of uranium chemical speciation taken into consideration in the analysis of its eco-toxic effects in fresh water. Methodological development and application to the Ritord case

International Nuclear Information System (INIS)

Beaugelin-Seiller, K.; Garnier-Laplace, J.; Gilbin, R.; Fevrier, L.

2009-01-01

The pluralistic expert group on uranium mine sites in Limousin ('GEP mines'), following the recommendation of its working group devoted to environmental and health impacts (WG2), has confirmed the interest of studying the influence of uranium speciation on the analysis of its eco-toxic effects. The WG2 produced specifications to which the SECRE applied successfully. This report presents the results of the corresponding study, funded by AREVA NC. The first point was to develop the required methodological aspects, the second their application in relation with the chemical risk assessment due to uranium exposure of the Ritord aquatic ecosystem. (authors)

Methodology for probability of failure assessment of offshore pipelines; Metodologia qualitativa de avaliacao da probabilidade de falha de dutos rigidos submarinos estaticos

Energy Technology Data Exchange (ETDEWEB)

Pezzi Filho, Mario [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2005-07-01

In this study it is presented a methodology for assessing the likelihood of failure for every failure mechanism defined for carbon steel static offshore pipelines. This methodology is aimed to comply with the Integrity Management policy established by the Company. Decision trees are used for the development of the methodology and the evaluation of the extent and the significance of these failure mechanisms. Decision trees enable also the visualization of the logical structure of algorithms which eventually will be used in risk assessment software. The benefits of the proposed methodology are presented and it is recommended that it be tested on static offshore pipelines installed in different assets for validation. (author)

Coal resources available for development; a methodology and pilot study

Science.gov (United States)

Eggleston, Jane R.; Carter, M. Devereux; Cobb, James C.

1990-01-01

Coal accounts for a major portion of our Nation's energy supply in projections for the future. A demonstrated reserve base of more than 475 billion short tons, as the Department of Energy currently estimates, indicates that, on the basis of today's rate of consumption, the United States has enough coal to meet projected energy needs for almost 200 years. However, the traditional procedures used for estimating the demonstrated reserve base do not account for many environmental and technological restrictions placed on coal mining. A new methodology has been developed to determine the quantity of coal that might actually be available for mining under current and foreseeable conditions. This methodology is unique in its approach, because it applies restrictions to the coal resource before it is mined. Previous methodologies incorporated restrictions into the recovery factor (a percentage), which was then globally applied to the reserve (minable coal) tonnage to derive a recoverable coal tonnage. None of the previous methodologies define the restrictions and their area and amount of impact specifically. Because these restrictions and their impacts are defined in this new methodology, it is possible to achieve more accurate and specific assessments of available resources. This methodology has been tested in a cooperative project between the U.S. Geological Survey and the Kentucky Geological Survey on the Matewan 7.5-minute quadrangle in eastern Kentucky. Pertinent geologic, mining, land-use, and technological data were collected, assimilated, and plotted. The National Coal Resources Data System was used as the repository for data, and its geographic information system software was applied to these data to eliminate restricted coal and quantify that which is available for mining. This methodology does not consider recovery factors or the economic factors that would be considered by a company before mining. Results of the pilot study indicate that, of the estimated

The use and effectiveness of information system development methodologies in health information systems / Pieter Wynand Conradie.

OpenAIRE

Conradie, Pieter Wynand

2010-01-01

Abstract The main focus of this study is the identification of factors influencing the use and effectiveness of information system development methodologies (Le., systems development methodologies) in health information systems. In essence, it can be viewed as exploratory research, utilizing a conceptual research model to investigate the relationships among the hypothesised factors. More specifically, classified as behavioural science, it combines two theoretical models, namely...

[Detailed methodological recommendations for the treatment of Clostridium difficile-associated diarrhea with faecal transplantation].

Science.gov (United States)

Nagy, Gergely György; Várvölgyi, Csaba; Balogh, Zoltán; Orosi, Piroska; Paragh, György

2013-01-06

The incidence of Clostridium difficile associated enteral disease shows dramatic increase worldwide, with appallingly high treatment costs, mortality figures, recurrence rates and treatment refractoriness. It is not surprising, that there is significant interest in the development and introduction of alternative therapeutic strategies. Among these only stool transplantation (or faecal bacteriotherapy) is gaining international acceptance due to its excellent cure rate (≈92%), low recurrence rate (≈6%), safety and cost-effectiveness. Unfortunately faecal transplantation is not available for most patients, although based on promising international results, its introduction into the routine clinical practice is well justified and widely expected. The authors would like to facilitate this process, by presenting a detailed faecal transplantation protocol prepared in their Institution based on the available literature and clinical rationality. Officially accepted national methodological guidelines will need to be issued in the future, founded on the expert opinion of relevant professional societies and upcoming advances in this field.

Blending critical realist and emancipatory practice development methodologies: making critical realism work in nursing research.

LENUS (Irish Health Repository)

Parlour, Randal

2012-12-01

This paper examines the efficacy of facilitation as a practice development intervention in changing practice within an Older Person setting and in implementing evidence into practice. It outlines the influences exerted by the critical realist paradigm in guiding emancipatory practice development activities and, in particular, how the former may be employed within an emancipatory practice development study to elucidate and increase understanding pertinent to causation and outcomes. The methodology is based upon an emancipatory practice development approach set within a realistic evaluation framework. This allows for systematic analysis of the social and contextual elements that influence the explication of outcomes associated with facilitation. The study is concentrated upon five practice development cycles, within which a sequence of iterative processes is integrated. The authors assert that combining critical realist and emancipatory processes offers a robust and practical method for translating evidence and implementing changes in practice, as the former affirms or falsifies the influence that emancipatory processes exert on attaining culture shift, and enabling transformation towards effective clinical practice. A new framework for practice development is proposed that establishes methodological coherency between emancipatory practice development and realistic evaluation. This augments the existing theoretical bases for both these approaches by contributing new theoretical and methodological understandings of causation.

Methodology for oil field development; Metodologia para o desenvolvimento de campos de petroleo

Energy Technology Data Exchange (ETDEWEB)

Galeano, Yadira Diaz

1998-07-01

The main scope of this work is to study and develop a methodology which allows the elaboration of project for oil field development. There fore it is necessary to consider to consider the integration of the human, technological and economical issues that are important parameters in the engineering project. The spiral concept was applied for the project in order to coordinate, in a reasonable and logical way, the activities involved in the field development, as well as the hierarchical analysis method for the decision making process. The development of an oil field is divided in viability study, preliminary project, final project, project implementation, production and field abandonment cycles. The main components for each cycle are external aspects, environmental criteria, reservoir management, and drilling, completion and well workover, production systems, exportation systems, and risk and economical analysis. The proposed methodology establishes a general scheme for planning and it presents applicable procedures for any field. (author)

User-Centered Design for Developing Interventions to Improve Clinician Recommendation of Human Papillomavirus Vaccination.

Science.gov (United States)

Henninger, Michelle L; Mcmullen, Carmit K; Firemark, Alison J; Naleway, Allison L; Henrikson, Nora B; Turcotte, Joseph A

2017-01-01

Human papillomavirus (HPV) is the most common sexually transmitted infection in the US and is associated with multiple types of cancer. Although effective HPV vaccines have been available since 2006, coverage rates in the US remain much lower than with other adolescent vaccinations. Prior research has shown that a strong recommendation from a clinician is a critical determinant in HPV vaccine uptake and coverage. However, few published studies to date have specifically addressed the issue of helping clinicians communicate more effectively with their patients about the HPV vaccine. To develop one or more novel interventions for helping clinicians make strong and effective recommendations for HPV vaccination. Using principles of user-centered design, we conducted qualitative interviews, interviews with persons from analogous industries, and a data synthesis workshop with multiple stakeholders. Five potential intervention strategies targeted at health care clinicians, youth, and their parents were developed. The two most popular choices to pursue were a values-based communication strategy and a puberty education workbook. User-centered design is a useful strategy for developing potential interventions to improve the rate and success of clinicians recommending the HPV vaccine. Further research is needed to test the effectiveness and acceptability of these interventions in clinical settings.

Energy sector assistance in developing countries: Current trends and policy recommendations

International Nuclear Information System (INIS)

Tharakan, Pradeep J.; Castro, Julio de; Kroeger, Timm

2007-01-01

An estimated 2.5 billion people remain without access to modern energy supplies. This shortfall is expected to grow as the population in developing countries continues to grow rapidly and the existing infrastructure ages. The United Nations' goal of lowering poverty by half by 2015 will not be attained unless the poor in developing countries gain greater access to basic infrastructure and services, including energy services. The key objective of this paper is to analyze trends in overseas development assistance (ODA) to the energy sector in developing countries during the period 1990-2003, relative to realized private sector investments. This analysis then forms the basis for policy recommendations for consideration by decision makers within countries that are major contributors to ODA

Hazard Ranking Methodology for Assessing Health Impacts of Unconventional Natural Gas Development and Production: The Maryland Case Study.

Directory of Open Access Journals (Sweden)

Meleah D Boyle

Full Text Available The recent growth of unconventional natural gas development and production (UNGDP has outpaced research on the potential health impacts associated with the process. The Maryland Marcellus Shale Public Health Study was conducted to inform the Maryland Marcellus Shale Safe Drilling Initiative Advisory Commission, State legislators and the Governor about potential public health impacts associated with UNGDP so they could make an informed decision that considers the health and well-being of Marylanders. In this paper, we describe an impact assessment and hazard ranking methodology we used to assess the potential public health impacts for eight hazards associated with the UNGDP process. The hazard ranking included seven metrics: 1 presence of vulnerable populations (e.g. children under the age of 5, individuals over the age of 65, surface owners, 2 duration of exposure, 3 frequency of exposure, 4 likelihood of health effects, 5 magnitude/severity of health effects, 6 geographic extent, and 7 effectiveness of setbacks. Overall public health concern was determined by a color-coded ranking system (low, moderately high, and high that was generated based on the overall sum of the scores for each hazard. We provide three illustrative examples of applying our methodology for air quality and health care infrastructure which were ranked as high concern and for water quality which was ranked moderately high concern. The hazard ranking was a valuable tool that allowed us to systematically evaluate each of the hazards and provide recommendations to minimize the hazards.

CHARACTERISTICS OF RESEARCH METHODOLOGY DEVELOPMENT IN SPECIAL EDUCATION AND REHABILITATION

Directory of Open Access Journals (Sweden)

Natasha ANGELOSKA-GALEVSKA

2004-12-01

Full Text Available The aim of the text is to point out the developmental tendencies in the research methodology of special education and rehabilitation worldwide and in our country and to emphasize the importance of methodological training of students in special education and rehabilitation at the Faculty of Philosophy in Skopje.The achieved scientific knowledge through research is the fundamental pre-condition for development of special education and rehabilitation theory and practice. The results of the scientific work sometimes cause small, insignificant changes, but, at times, they make radical changes. Thank to the scientific researches and knowledge, certain prejudices were rejected. For example, in the sixth decade of the last century there was a strong prejudice that mentally retarded children should be segregated from the society as aggressive and unfriendly ones or the deaf children should not learn sign language because they would not be motivated to learn lip-reading and would hardly adapt. Piaget and his colleagues from Geneva institute were the pioneers in researching this field and they imposed their belief that handicapped children were not handicapped in each field and they had potentials that could be developed and improved by systematic and organized work. It is important to initiate further researches in the field of special education and rehabilitation, as well as a critical analysis of realized researches. Further development of the scientific research in special education and rehabilitation should be a base for education policy on people with disabilities and development of institutional and non-institutional treatment of this population.

Guidelines and Recommendations for Developing Interactive eHealth Apps for Complex Messaging in Health Promotion.

Science.gov (United States)

Heffernan, Kayla Joanne; Chang, Shanton; Maclean, Skye Tamara; Callegari, Emma Teresa; Garland, Suzanne Marie; Reavley, Nicola Jane; Varigos, George Andrew; Wark, John Dennis

2016-02-09

The now ubiquitous catchphrase, "There's an app for that," rings true owing to the growing number of mobile phone apps. In excess of 97,000 eHealth apps are available in major app stores. Yet the effectiveness of these apps varies greatly. While a minority of apps are developed grounded in theory and in conjunction with health care experts, the vast majority are not. This is concerning given the Hippocratic notion of "do no harm." There is currently no unified formal theory for developing interactive eHealth apps, and development is especially difficult when complex messaging is required, such as in health promotion and prevention. This paper aims to provide insight into the creation of interactive eHealth apps for complex messaging, by leveraging the Safe-D case study, which involved complex messaging required to guide safe but sufficient UV exposure for vitamin D synthesis in users. We aim to create recommendations for developing interactive eHealth apps for complex messages based on the lessons learned during Safe-D app development. For this case study we developed an Apple and Android app, both named Safe-D, to safely improve vitamin D status in young women through encouraging safe ultraviolet radiation exposure. The app was developed through participatory action research involving medical and human computer interaction researchers, subject matter expert clinicians, external developers, and target users. The recommendations for development were created from analysis of the development process. By working with clinicians and implementing disparate design examples from the literature, we developed the Safe-D app. From this development process, recommendations for developing interactive eHealth apps for complex messaging were created: (1) involve a multidisciplinary team in the development process, (2) manage complex messages to engage users, and (3) design for interactivity (tailor recommendations, remove barriers to use, design for simplicity). This research has

Analysis of Software Development Methodologies to Build Safety Software Applications for the SATEX-II: A Mexican Experimental Satellite

Science.gov (United States)

Aguilar Cisneros, Jorge; Vargas Martinez, Hector; Pedroza Melendez, Alejandro; Alonso Arevalo, Miguel

2013-09-01

Mexico is a country where the experience to build software for satellite applications is beginning. This is a delicate situation because in the near future we will need to develop software for the SATEX-II (Mexican Experimental Satellite). SATEX- II is a SOMECyTA's project (the Mexican Society of Aerospace Science and Technology). We have experienced applying software development methodologies, like TSP (Team Software Process) and SCRUM in other areas. Then, we analyzed these methodologies and we concluded: these can be applied to develop software for the SATEX-II, also, we supported these methodologies with SSP-05-0 Standard in particular with ESA PSS-05-11. Our analysis was focusing on main characteristics of each methodology and how these methodologies could be used with the ESA PSS 05-0 Standards. Our outcomes, in general, may be used by teams who need to build small satellites, but, in particular, these are going to be used when we will build the on board software applications for the SATEX-II.

Building energy, building leadership : recommendations for the adoption, development, and implementation of a commercial building energy code in Manitoba

Energy Technology Data Exchange (ETDEWEB)

Akerstream, T. [Manitoba Hydro, Winnipeg, MB (Canada); Allard, K. [City of Thompson, Thompson, MB (Canada); Anderson, N.; Beacham, D. [Manitoba Office of the Fire Commissioner, Winnipeg, MB (Canada); Andrich, R. [The Forks North Portage Partnership, MB (Canada); Auger, A. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency; Downs, R.G. [Shindico Realty Inc., Winnipeg, MB (Canada); Eastwood, R. [Number Ten Architectural Group, Winnipeg, MB (Canada); Hewitt, C. [SMS Engineering Ltd., Winnipeg, MB (Canada); Joshi, D. [City of Winnipeg, Winnipeg, MB (Canada); Klassen, K. [Manitoba Dept. of Energy Science and Technology, Winnipeg, MB (Canada); Phillips, B. [Unies Ltd., Winnipeg, MB (Canada); Wiebe, R. [Ben Wiebe Construction Ltd., Winnipeg, MB (Canada); Woelk, D. [Bockstael Construction Ltd., Winnipeg, MB (Canada); Ziemski, S. [CREIT Management LLP, Winnipeg, MB (Canada)

2006-09-15

This report presented a strategy and a set of recommendations for the adoption, development and implementation of an energy code for new commercial construction in Manitoba. The report was compiled by an advisory committee comprised of industry representatives and government agency representatives. Recommendations were divided into 4 categories: (1) advisory committee recommendations; (2) code adoption recommendations; (3) code development recommendations; and (4) code implementation recommendations. It was suggested that Manitoba should adopt an amended version of the Model National Energy Code for Buildings (1997) as a regulation under the Buildings and Mobile Homes Act. Participation in a national initiative to update the Model National Energy Code for Buildings was also advised. It was suggested that the energy code should be considered as the first step in a longer-term process towards a sustainable commercial building code. However, the code should be adopted within the context of a complete market transformation approach. Other recommendations included: the establishment of a multi-stakeholder energy code task group; the provision of information and technical resources to help build industry capacity; the establishment of a process for energy code compliance; and an ongoing review of the energy code to assess impacts and progress. Supplemental recommendations for future discussion included the need for integrated design by building design teams in Manitoba; the development of a program to provide technical assistance to building design teams; and collaboration between post-secondary institutions to develop and deliver courses on integrated building design to students and professionals. 17 refs.

The Health Behaviour in School-aged Children (HBSC) study: methodological developments and current tensions

DEFF Research Database (Denmark)

Roberts, Chris; Freeman, John; Samdal, Oddrun

2009-01-01

OBJECTIVES: To describe the methodological development of the HBSC survey since its inception and explore methodological tensions that need to be addressed in the ongoing work on this and other large-scale cross-national surveys. METHODS: Using archival data and conversations with members...... of the network, we collaboratively analysed our joint understandings of the survey's methodology. RESULTS: We identified four tensions that are likely to be present in upcoming survey cycles: (1) maintaining quality standards against a background of rapid growth, (2) continuous improvement with limited financial...... in working through such challenges renders it likely that HBSC can provide a model of other similar studies facing these tensions....

Enabling Psychiatrists to be Mobile Phone App Developers: Insights Into App Development Methodologies.

Science.gov (United States)

Zhang, Melvyn Wb; Tsang, Tammy; Cheow, Enquan; Ho, Cyrus Sh; Yeong, Ng Beng; Ho, Roger Cm

2014-11-11

The use of mobile phones, and specifically smartphones, in the last decade has become more and more prevalent. The latest mobile phones are equipped with comprehensive features that can be used in health care, such as providing rapid access to up-to-date evidence-based information, provision of instant communications, and improvements in organization. The estimated number of health care apps for mobile phones is increasing tremendously, but previous research has highlighted the lack of critical appraisal of new apps. This lack of appraisal of apps has largely been due to the lack of clinicians with technical knowledge of how to create an evidence-based app. We discuss two freely available methodologies for developing Web-based mobile phone apps: a website builder and an app builder. With these, users can program not just a Web-based app, but also integrate multimedia features within their app, without needing to know any programming language. We present techniques for creating a mobile Web-based app using two well-established online mobile app websites. We illustrate how to integrate text-based content within the app, as well as integration of interactive videos and rich site summary (RSS) feed information. We will also briefly discuss how to integrate a simple questionnaire survey into the mobile-based app. A questionnaire survey was administered to students to collate their perceptions towards the app. These two methodologies for developing apps have been used to convert an online electronic psychiatry textbook into two Web-based mobile phone apps for medical students rotating through psychiatry in Singapore. Since the inception of our mobile Web-based app, a total of 21,991 unique users have used the mobile app and online portal provided by WordPress, and another 717 users have accessed the app via a Web-based link. The user perspective survey results (n=185) showed that a high proportion of students valued the textbook and objective structured clinical

KALIMER database development (database configuration and design methodology)

International Nuclear Information System (INIS)

Jeong, Kwan Seong; Kwon, Young Min; Lee, Young Bum; Chang, Won Pyo; Hahn, Do Hee

2001-10-01

KALIMER Database is an advanced database to utilize the integration management for Liquid Metal Reactor Design Technology Development using Web Applicatins. KALIMER Design database consists of Results Database, Inter-Office Communication (IOC), and 3D CAD database, Team Cooperation system, and Reserved Documents, Results Database is a research results database during phase II for Liquid Metal Reactor Design Technology Develpment of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD Database is s schematic design overview for KALIMER. Team Cooperation System is to inform team member of research cooperation and meetings. Finally, KALIMER Reserved Documents is developed to manage collected data and several documents since project accomplishment. This report describes the features of Hardware and Software and the Database Design Methodology for KALIMER

Symptomatic spinal metastasis: A systematic literature review of the preoperative prognostic factors for survival, neurological, functional and quality of life in surgically treated patients and methodological recommendations for prognostic studies.

Directory of Open Access Journals (Sweden)

Anick Nater

Full Text Available While several clinical prediction rules (CPRs of survival exist for patients with symptomatic spinal metastasis (SSM, these have variable prognostic ability and there is no recognized CPR for health related quality of life (HRQoL. We undertook a critical appraisal of the literature to identify key preoperative prognostic factors of clinical outcomes in patients with SSM who were treated surgically. The results of this study could be used to modify existing or develop new CPRs.Seven electronic databases were searched (1990-2015, without language restriction, to identify studies that performed multivariate analysis of preoperative predictors of survival, neurological, functional and HRQoL outcomes in surgical patients with SSM. Individual studies were assessed for class of evidence. The strength of the overall body of evidence was evaluated using GRADE for each predictor.Among 4,818 unique citations, 17 were included; all were in English, rated Class III and focused on survival, revealing a total of 46 predictors. The strength of the overall body of evidence was very low for 39 and low for 7 predictors. Due to considerable heterogeneity in patient samples and prognostic factors investigated as well as several methodological issues, our results had a moderately high risk of bias and were difficult to interpret.The quality of evidence for predictors of survival was, at best, low. We failed to identify studies that evaluated preoperative prognostic factors for neurological, functional, or HRQoL outcomes in surgical patients with SSM. We formulated methodological recommendations for prognostic studies to promote acquiring high-quality evidence to better estimate predictor effect sizes to improve patient education, surgical decision-making and development of CPRs.

Security Testing in Agile Web Application Development - A Case Study Using the EAST Methodology

CERN Document Server

Erdogan, Gencer

2010-01-01

There is a need for improved security testing methodologies specialized for Web applications and their agile development environment. The number of web application vulnerabilities is drastically increasing, while security testing tends to be given a low priority. In this paper, we analyze and compare Agile Security Testing with two other common methodologies for Web application security testing, and then present an extension of this methodology. We present a case study showing how our Extended Agile Security Testing (EAST) performs compared to a more ad hoc approach used within an organization. Our working hypothesis is that the detection of vulnerabilities in Web applications will be significantly more efficient when using a structured security testing methodology specialized for Web applications, compared to existing ad hoc ways of performing security tests. Our results show a clear indication that our hypothesis is on the right track.

Methodology for Analyzing and Developing Information Management Infrastructure to Support Telerehabilitation

Directory of Open Access Journals (Sweden)

Andi Saptono

2009-09-01

Full Text Available The proliferation of advanced technologies led researchers within the Rehabilitation Engineering Research Center on Telerehabilitation (RERC-TR to devise an integrated infrastructure for clinical services using the University of Pittsburgh (PITT model. This model describes five required characteristics for a telerehabilitation (TR infrastructure: openness, extensibility, scalability, cost-effectiveness, and security. The infrastructure is to deliver clinical services over distance to improve access to health services for people living in underserved or remote areas. The methodological approach to design, develop, and employ this infrastructure is explained and detailed for the remote wheelchair prescription project, a research task within the RERC-TR. The availability of this specific clinical service and personnel outside of metropolitan areas is limited due to the lack of specialty expertise and access to resources. The infrastructure is used to deliver expertise in wheeled mobility and seating through teleconsultation to remote clinics, and has been successfully deployed to five rural clinics in Western Pennsylvania. Keywords: Telerehabilitation, Information Management, Infrastructure Development Methodology, Videoconferencing, Online Portal, Database

The Idea of National HRD: An Analysis Based on Economics and Theory Development Methodology

Science.gov (United States)

Wang, Greg G.; Swanson, Richard A.

2008-01-01

Recent human resource development (HRD) literature focuses attention on national HRD (NHRD) research and represents problems in both HRD identity and research methodology. Based on a review of development economics and international development literature, this study analyzes the existing NHRD literature with respect to the theory development…

Best practice recommendations for the development, implementation, and evaluation of online knowledge translation resources in rehabilitation.

Science.gov (United States)

Levac, Danielle; Glegg, Stephanie M N; Camden, Chantal; Rivard, Lisa M; Missiuna, Cheryl

2015-04-01

The knowledge-to-practice gap in rehabilitation has spurred knowledge translation (KT) initiatives aimed at promoting clinician behavior change and improving patient care. Online KT resources for physical therapists and other rehabilitation clinicians are appealing because of their potential to reach large numbers of individuals through self-paced, self-directed learning. This article proposes best practice recommendations for developing online KT resources that are designed to translate evidence into practice. Four recommendations are proposed with specific steps in the development, implementation, and evaluation process: (1) develop evidence-based, user-centered content; (2) tailor content to online format; (3) evaluate impact; and (4) share results and disseminate knowledge. Based on KT evidence and instructional design principles, concrete examples are provided along with insights gained from experiences in creating and evaluating online KT resources for physical therapists. In proposing these recommendations, the next steps for research are suggested, and others are invited to contribute to the discussion. © 2015 American Physical Therapy Association.

Theoretical and methodological basis of the comparative historical and legal method development