Penn gap rule in phase-change memory materials: No clear evidence for resonance bonds

Directory of Open Access Journals (Sweden)

K. Shimakawa

2015-04-01

Full Text Available Although a proposal of resonance bonds in crystalline phase-change materials based on the GeSbTe system has been provided, we do not find any clear evidence in favor of the proposal. The ellipsometric study demonstrates that a change in the high frequency dielectric constant ε∞ between the amorphous and crystalline phases is only scaled by the average bandgap (the Penn gap rule. Even for a pure antimony film, regarded as a prototype resonance bonding material, ε∞ was found to follow the Penn gap rule. Experimentally, we did not find any evidence of a significant change in the optical transition matrix element during the phase change, which is necessary to support the idea of resonance bonds.

Penn State University ground software support for X-ray missions.

Science.gov (United States)

Townsley, L. K.; Nousek, J. A.; Corbet, R. H. D.

1995-03-01

The X-ray group at Penn State is charged with two software development efforts in support of X-ray satellite missions. As part of the ACIS instrument team for AXAF, the authors are developing part of the ground software to support the instrument's calibration. They are also designing a translation program for Ginga data, to change it from the non-standard FRF format, which closely parallels the original telemetry format, to FITS.

Patient-centered outcomes research in radiology: trends in funding and methodology.

Science.gov (United States)

Lee, Christoph I; Jarvik, Jeffrey G

2014-09-01

The creation of the Patient-Centered Outcomes Research Trust Fund and the Patient-Centered Outcomes Research Institute (PCORI) through the Patient Protection and Affordable Care Act of 2010 presents new opportunities for funding patient-centered comparative effectiveness research (CER) in radiology. We provide an overview of the evolution of federal funding and priorities for CER with a focus on radiology-related priority topics over the last two decades, and discuss the funding processes and methodological standards outlined by PCORI. We introduce key paradigm shifts in research methodology that will be required on the part of radiology health services researchers to obtain competitive federal grant funding in patient-centered outcomes research. These paradigm shifts include direct engagement of patients and other stakeholders at every stage of the research process, from initial conception to dissemination of results. We will also discuss the increasing use of mixed methods and novel trial designs. One of these trial designs, the pragmatic trial, has the potential to be readily applied to evaluating the effectiveness of diagnostic imaging procedures and imaging-based interventions among diverse patient populations in real-world settings. Copyright © 2014 AUR. Published by Elsevier Inc. All rights reserved.

Undergraduate recruitment strategies at Penn State's School of Forest Resources

OpenAIRE

Harper, Betty

2004-01-01

Enrollment declines in natural resources programs across the nation since the mid-nineties have raised concerns about the future of natural resources education. Since its peak in 1998, enrollment in Penn State's School of Forest Resources has dropped from a record high of 535 to 315 in fall 2003. At the same time state and federal agencies seeking to maintain and diversify their workforce are facing unprecedented rates of retirement. To address this issue, the School of Forest Resources is co...

75 FR 81331 - Surety Companies Acceptable on Federal Bonds: Termination-Penn Millers Insurance Company

Science.gov (United States)

2010-12-27

... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds: Termination--Penn Millers Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department...

FEASIBILITY ANALYSIS FOR INSTALLING A CIRCULATING FLUIDIZED BED BOILER FOR COFIRING MULTIPLE BIOFUELS AND OTHER WASTES WITH COAL AT PENN STATE UNIVERSITY

International Nuclear Information System (INIS)

Bruce G. Miller; Sharon Falcone Miller; Robert Cooper; Douglas Donovan; John Gaudlip; Matthew Lapinsky; William Serencsits; Neil Raskin; Dale Lamke; Joseph J. Battista

2001-01-01

The Pennsylvania State University, under contract to the U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) is performing a feasibility analysis on installing a state-of-the-art circulating fluidized bed (CFB) boiler and ceramic filter emission control device at Penn State's University Park campus for cofiring multiple biofuels and other wastes with coal, and developing a test program to evaluate cofiring multiple biofuels and coal-based feedstocks. Penn State currently operates an aging stoker-fired steam plant at its University Park campus and has spent considerable resources over the last ten to fifteen years investigating boiler replacements and performing life extension studies. This effort, in combination with a variety of agricultural and other wastes generated at the agricultural-based university and the surrounding rural community, has led Penn State to assemble a team of fluidized bed and cofiring experts to assess the feasibility of installing a CFB boiler for cofiring biomass and other wastes along with coal-based fuels. The objective of the project is being accomplished using a team that includes personnel from Penn State's Energy Institute and the Office of Physical Plant, Foster Wheeler Energy Services, Inc., and Cofiring Alternatives

Particle transport methods for LWR dosimetry developed by the Penn State transport theory group

International Nuclear Information System (INIS)

Haghighat, A.; Petrovic, B.

1997-01-01

This paper reviews advanced particle transport theory methods developed by the Penn State Transport Theory Group (PSTTG) over the past several years. These methods have been developed in response to increasing needs for accuracy of results and for three-dimensional modeling of nuclear systems

The Guatemala-Penn Partners: An Innovative Inter-Institutional Model for Scientific Capacity-Building, Healthcare Education, and Public Health

Science.gov (United States)

Paniagua-Avila, Maria Alejandra; Messenger, Elizabeth; Nelson, Caroline A.; Calgua, Erwin; Barg, Frances K.; Bream, Kent W.; Compher, Charlene; Dean, Anthony J.; Martinez-Siekavizza, Sergio; Puac-Polanco, Victor; Richmond, Therese S.; Roth, Rudolf R.; Branas, Charles C.

2017-01-01

Population health outcomes are directly related to robust public health programs, access to basic health services, and a well-trained health-care workforce. Effective health services need to systematically identify solutions, scientifically test these solutions, and share generated knowledge. The World Health Organization (WHO)’s Global Healthcare Workforce Alliance states that the capacity to perform research is an essential factor for well-functioning public health systems. Low- and middle-income countries have greater health-care worker shortages and lower research capacity than higher-income countries. International global health partnerships between higher-income countries and low-middle-income countries aim to directly address such inequalities through capacity building, a process by which human and institutional resources are strengthened and developed, allowing them to perform high-level functions, solve complex problems, and achieve important objectives. The Guatemala–Penn Partners (GPP) is a collaboration among academic centers in Guatemala and the University of Pennsylvania (Penn), in Philadelphia, Pennsylvania that echoes the vision of the WHO’s Global Healthcare Workforce Alliance. This article describes the historical development and present organization of the GPP according to its three guiding principles: university-to-university connections, dual autonomies with locally led capacity building, and mutually beneficial exchanges. It describes the GPP activities within the domains of science, health-care education, and public health, emphasizing implementation factors, such as sustainability and scalability, in relation to the guiding principles. Successes and limitations of this innovative model are also analyzed in the hope that the lessons learned may be applied to similar partnerships across the globe. PMID:28443274

First results from the Penn State Allsky Imager at the Arecibo Observatory

Science.gov (United States)

Seker, I.; Mathews, J. D.; Wiig, J.; Gutierrez, P. F.; Friedman, J. S.; Tepley, C. A.

2007-03-01

The Penn State Allsky imager (PSASI), a user-owned-public-access (UOPA) instrument installed at Arecibo Observatory (AO: 18.3°N, 66.75°W; altitude: 350 m a.s.l.; L = 1.43 at 300 km; dip angle: 46°; geomagnetic coordinates: 29°N, 5.5°E), is a CCD-based high-resolution allsky optical imager that has been collecting ionospheric airglow data at night since May 2003. The computer controlled six-position filter wheel is equipped with three filters at 630 nm (red), 557.7 nm (green), and 777.4 nm (near-IR), respectively, which correspond to ionosphere-related oxygen emissions. The imager data, taken for more than 3.5 years now, is being used to study various ionospheric processes, such as mapped equatorial spread-F plumes, E-region gravity waves, among other, in conjunction with the AO incoherent scatter radar (ISR), mesosphere and lower thermosphere (MLT) metals lidar, and other instruments, including microbarographs. Data availability and quality as well as specific airglow events on both small/large time/spatial scales are examined, categorized, and made freely available at a data-server website. Our goal here is to briefly review the airglow science enabled by allsky imaging at AO, to describe the instrument and the data-collection methodology, and to present some of the significant results, including airglow events that correspond to ISR results.

Teachers' Attitude towards Implementation of Learner-Centered Methodology in Science Education in Kenya

Science.gov (United States)

Ndirangu, Caroline

2017-01-01

This study aims to evaluate teachers' attitude towards implementation of learner-centered methodology in science education in Kenya. The study used a survey design methodology, adopting the purposive, stratified random and simple random sampling procedures and hypothesised that there was no significant relationship between the head teachers'…

Psychometric Properties of the Penn State Worry Questionnaire for Children in a Large Clinical Sample

Science.gov (United States)

Pestle, Sarah L.; Chorpita, Bruce F.; Schiffman, Jason

2008-01-01

The Penn State Worry Questionnaire for Children (PSWQ-C; Chorpita, Tracey, Brown, Collica, & Barlow, 1997) is a 14-item self-report measure of worry in children and adolescents. Although the PSWQ-C has demonstrated favorable psychometric properties in small clinical and large community samples, this study represents the first psychometric…

EVIDENCE FOR METAL ATTENUATION IN ACID MINE WATER BY SULFATE REDUCTION, PENN MINE, CALAVERAS COUNTY, CALIFORNIA

Science.gov (United States)

The Penn Mine in Calaveras County, California, produced Cu from massive sulfide ores from 1861 to 1953. Mine wastes were removed to a landfill during the late 1990s, improving surface-water quality, but deep mine workings were not remediated and contain metalliferous water with p...

Humanities mini-course curricula for midcareer health professionals at the Penn State Milton S. Hershey Medical Center.

Science.gov (United States)

Myers, Kimberly R; George, Daniel R

2012-08-01

The field of medical humanities has traditionally focused on medical students and, more recently, on premedical undergraduates. Comparatively little formal humanities pedagogy has been dedicated to midcareer health professionals. To address this lack, the Department of Humanities at the Pennsylvania State University College of Medicine and the Milton S. Hershey Medical Center designed eight annual humanities mini-courses for faculty and staff throughout the college and medical center.These mini-courses fell into four categories: reading, reflection, and discussion; creative expression; technology; and ethics. They were geared toward midcareer health professionals who were seeking new intellectual and creative stimulation and variety in daily routine. They also provided humanities faculty the opportunity to devote attention to topics that capitalize on their professional training and that interest them personally.Participants indicated a high degree of satisfaction with the mini-courses for four principal reasons: (1) learning the tools and methodologies of a new discipline or domain other than biomedicine, (2) using their minds and training in uncustomary ways, (3) forming new alliances with colleagues (which served to lessen the sense of professional isolation), and (4) enjoying a respite from the stressful flow of the workday. Humanities faculty facilitators provided more mixed responses but agreed that conducting the mini-courses had been a positive overall experience.Although this article provides a foundational framework for the development of a humanities mini-course series, the authors encourage others to replicate these curricula in other medical settings as an important step toward a robust pedagogy designed for midcareer health care professionals.

Spanish adaptation of The Penn State College of Medicine Scale to assess professionalism in medical students.

Science.gov (United States)

Bustamante, Eliseo; Sanabria, Álvaro

2014-01-01

Professionalism is a subject of interest in medical schools around the world. The use of a questionnaire could be useful to assess professionalism in Colombia. To adapt The Penn State University College of Medicine Professionalism Questionnaire as a culturally valid instrument in the Spanish language. We followed recommendations from the IQOLA project and used forward and back translation with four independent translations, as well as a pilot evaluation and an evaluation of psychometric features with 250 students. We evaluated item-scale correlations and internal consistency with Chronbach's alpha test and conducted a principal components factor analysis. Global Cronbach's alpha was 0.86, the Kaiser-Meyer-Olkin measure of sampling adequacy was 0.83, and Bartlett's test of sphericity had a p >0.00001. We found six factors that explained 93% of the total variance and four new factors emerged in the factor analysis, while eight items had high uniqueness. The Penn State University College of Medicine Scale measures professionalism attitudes in medical students with good reliability. However, the structure of the scale demonstrated differences when used in the Latin American medical student population.

Characterizing customers at medical center farmers' markets.

Science.gov (United States)

Kraschnewski, Jennifer L; George, Daniel R; Rovniak, Liza S; Monroe, Diana L; Fiordalis, Elizabeth; Bates, Erica

2014-08-01

Approximately 100 farmers' markets operate on medical center campuses. Although these venues can uniquely serve community health needs, little is known about customer characteristics and outreach efforts. Intercept survey of markets and market customers between August 2010 and October 2011 at three medical centers in different geographic regions of the US (Duke University Medical Center, Cleveland Clinic, and Penn State Hershey Medical Center) were conducted. Markets reported serving 180-2,000 customers per week and conducting preventive medicine education sessions and community health programs. Customers (n = 585) across markets were similar in sociodemographic characteristics--most were middle-aged, white, and female, who were employees of their respective medical center. Health behaviors of customers were similar to national data. The surveyed medical center farmers' markets currently serve mostly employees; however, markets have significant potential for community outreach efforts in preventive medicine. If farmers' markets can broaden their reach to more diverse populations, they may play an important role in contributing to community health.

The influence of device position on the flow within the Penn State 12 cc pediatric ventricular assist device.

Science.gov (United States)

Schönberger, Markus; Deutsch, Steven; Manning, Keefe B

2012-01-01

Ventricular assist devices are a commonly used heart failure therapy for adult patients as bridge-to-transplant or bridge-to-recovery tools. The application of adult ventricular assist devices in pediatric patients has led to increased thrombotic events. Therefore, we have been developing a pediatric ventricular assist device (PVAD), the Penn State 12 cc PVAD. It is designed for patients with a body weight of 5-15 kg and has a stroke volume of 12 cc. Clot formation is the major concern. It is correlated to the coagulability of blood, the blood contacting materials and the fluid dynamics within the system. The intent is for the PVAD to be a long term therapy. Therefore, the system may be oriented in different positions according to the patient's behavior. This study evaluates for the first time the impact of position on the flow patterns within the Penn State 12 cc PVAD, which may help to improve the PVAD design concerning chamber and ports geometries. The fluid dynamics are visualized by particle image velocimetry. The evaluation is based on inlet jet behavior and calculated wall shear rates. Vertical and horizontal model orientations are compared, both with a beat rate of 75, outlet pressures of 90/60 mm Hg and a flow rate of 1.3 l/min. The results show a significant change of the inlet jet behavior and the development of a rotational flow pattern. Vertically, the inlet jet is strong along the wall. It initiates a rotational flow pattern with a wandering axis of rotation. In contrast, the horizontal model orientation results show a weaker inlet jet along the wall with a nearly constant center of rotation location, which can be correlated to a higher risk of thrombotic events. In addition, high speed videography illustrates differences in the diaphragm motion during diastole. Diaphragm opening trajectories measurements determine no significant impact of the density of the blood analog fluids. Hence, the results correlate to human blood.

Characterizing customers at medical center farmers’ markets1

Science.gov (United States)

Kraschnewski, Jennifer L.; George, Daniel R.; Rovniak, Liza S.; Monroe, Diana L.; Fiordalis, Elizabeth; Bates, Erica

2014-01-01

Approximately 100 farmers’ markets operate on medical center campuses. Although these venues can uniquely serve community health needs, little is known about customer characteristics and outreach efforts. Intercept survey of markets and market customers between August 2010-October 2011 at three medical centers in different geographic regions of the US: Duke University Medical Center, Cleveland Clinic, and Penn State Hershey Medical Center were conducted. Markets reported serving 180–2000 customers per week and conducting preventive medicine education sessions and community health programs. Customers (n=585) across markets were similar in sociodemographic characteristics – most were middle-aged, white, and female, who were employees of their respective medical center. Health behaviors of customers were similar to national data. The surveyed medical center farmers’ markets currently serve mostly employees; however, markets have significant potential for community outreach efforts in preventive medicine. If farmers’ markets can broaden their reach to more diverse populations, they may play an important role in contributing to community health. PMID:24421001

A Human-Centered Design Methodology to Enhance the Usability, Human Factors, and User Experience of Connected Health Systems: A Three-Phase Methodology

Science.gov (United States)

Harte, Richard; Glynn, Liam; Rodríguez-Molinero, Alejandro; Baker, Paul MA; Scharf, Thomas; ÓLaighin, Gearóid

2017-01-01

Background Design processes such as human-centered design, which involve the end user throughout the product development and testing process, can be crucial in ensuring that the product meets the needs and capabilities of the user, particularly in terms of safety and user experience. The structured and iterative nature of human-centered design can often present a challenge when design teams are faced with the necessary, rapid, product development life cycles associated with the competitive connected health industry. Objective We wanted to derive a structured methodology that followed the principles of human-centered design that would allow designers and developers to ensure that the needs of the user are taken into account throughout the design process, while maintaining a rapid pace of development. In this paper, we present the methodology and its rationale before outlining how it was applied to assess and enhance the usability, human factors, and user experience of a connected health system known as the Wireless Insole for Independent and Safe Elderly Living (WIISEL) system, a system designed to continuously assess fall risk by measuring gait and balance parameters associated with fall risk. Methods We derived a three-phase methodology. In Phase 1 we emphasized the construction of a use case document. This document can be used to detail the context of use of the system by utilizing storyboarding, paper prototypes, and mock-ups in conjunction with user interviews to gather insightful user feedback on different proposed concepts. In Phase 2 we emphasized the use of expert usability inspections such as heuristic evaluations and cognitive walkthroughs with small multidisciplinary groups to review the prototypes born out of the Phase 1 feedback. Finally, in Phase 3 we emphasized classical user testing with target end users, using various metrics to measure the user experience and improve the final prototypes. Results We report a successful implementation of the

DCU 250 Arabic dependency bank: an LFG gold standard resource for the Arabic Penn treebank

OpenAIRE

Al-Raheb, Yafa; Akrout, Amine; van Genabith, Josef; Dichy, J.

2006-01-01

This paper describes the construction of a dependency bank gold standard for Arabic, DCU 250 Arabic Dependency Bank (DCU 250), based on the Arabic Penn Treebank Corpus (ATB) (Bies and Maamouri, 2003; Maamouri and Bies, 2004) within the theoretical framework of Lexical Functional Grammar (LFG). For parsing and automatically extracting grammatical and lexical resources from treebanks, it is necessary to evaluate against established gold standard resources. Gold standards for various languages h...

A Human-Centered Design Methodology to Enhance the Usability, Human Factors, and User Experience of Connected Health Systems: A Three-Phase Methodology.

Science.gov (United States)

Harte, Richard; Glynn, Liam; Rodríguez-Molinero, Alejandro; Baker, Paul Ma; Scharf, Thomas; Quinlan, Leo R; ÓLaighin, Gearóid

2017-03-16

Design processes such as human-centered design, which involve the end user throughout the product development and testing process, can be crucial in ensuring that the product meets the needs and capabilities of the user, particularly in terms of safety and user experience. The structured and iterative nature of human-centered design can often present a challenge when design teams are faced with the necessary, rapid, product development life cycles associated with the competitive connected health industry. We wanted to derive a structured methodology that followed the principles of human-centered design that would allow designers and developers to ensure that the needs of the user are taken into account throughout the design process, while maintaining a rapid pace of development. In this paper, we present the methodology and its rationale before outlining how it was applied to assess and enhance the usability, human factors, and user experience of a connected health system known as the Wireless Insole for Independent and Safe Elderly Living (WIISEL) system, a system designed to continuously assess fall risk by measuring gait and balance parameters associated with fall risk. We derived a three-phase methodology. In Phase 1 we emphasized the construction of a use case document. This document can be used to detail the context of use of the system by utilizing storyboarding, paper prototypes, and mock-ups in conjunction with user interviews to gather insightful user feedback on different proposed concepts. In Phase 2 we emphasized the use of expert usability inspections such as heuristic evaluations and cognitive walkthroughs with small multidisciplinary groups to review the prototypes born out of the Phase 1 feedback. Finally, in Phase 3 we emphasized classical user testing with target end users, using various metrics to measure the user experience and improve the final prototypes. We report a successful implementation of the methodology for the design and development

An integrated methodology for process improvement and delivery system visualization at a multidisciplinary cancer center.

Science.gov (United States)

Singprasong, Rachanee; Eldabi, Tillal

2013-01-01

Multidisciplinary cancer centers require an integrated, collaborative, and stream-lined workflow in order to provide high quality of patient care. Due to the complex nature of cancer care and continuing changes to treatment techniques and technologies, it is a constant struggle for centers to obtain a systemic and holistic view of treatment workflow for improving the delivery systems. Project management techniques, Responsibility matrix and a swim-lane activity diagram representing sequence of activities can be combined for data collection, presentation, and evaluation of the patient care. This paper presents this integrated methodology using multidisciplinary meetings and walking the route approach for data collection, integrated responsibility matrix and swim-lane activity diagram with activity time for data representation and 5-why and gap analysis approach for data analysis. This enables collection of right detail of information in a shorter time frame by identifying process flaws and deficiencies while being independent of the nature of the patient's disease or treatment techniques. A case study of a multidisciplinary regional cancer centre is used to illustrate effectiveness of the proposed methodology and demonstrates that the methodology is simple to understand, allowing for minimal training of staff and rapid implementation. © 2011 National Association for Healthcare Quality.

Flow Visualization of Three-Dimensionality Inside the 12 cc Penn State Pulsatile Pediatric Ventricular Assist Device

OpenAIRE

Roszelle, Breigh N.; Deutsch, Steven; Manning, Keefe B.

2010-01-01

In order to aid the ongoing concern of limited organ availability for pediatric heart transplants, Penn State has continued development of a pulsatile Pediatric Ventricular Assist Device (PVAD). Initial studies of the PVAD observed an increase in thrombus formation due to differences in flow field physics when compared to adult sized devices, which included a higher degree of three-dimensionality. This unique flow field brings into question the use of 2D planar particle image velocimetry (PIV...

Penn State geoPebble system: Design,Implementation, and Initial Results

Science.gov (United States)

Urbina, J. V.; Anandakrishnan, S.; Bilen, S. G.; Fleishman, A.; Burkett, P.

2014-12-01

The Penn State geoPebble system is a new network of wirelessly interconnected seismic and GPS sensor nodes with flexible architecture. This network will be used for studies of ice sheets in Antarctica and Greenland, as well as to investigate mountain glaciers. The network will consist of ˜150 geoPebbles that can be deployed in a user-defined spatial geometry. We present our design methodology, which has enabled us to develop these state-of- the art sensors using commercial-off-the-shelf hardware combined with custom-designed hardware and software. Each geoPebble is a self- contained, wirelessly connected sensor for collecting seismic measurements and position information. Key elements of each node encompasses a three-component seismic recorder, which includes an amplifier, filter, and 24- bit analog-to-digital converter that can sample up to 10 kHz. Each unit also includes a microphone channel to record the ground-coupled airwave. The timing for each node is available from GPS measurements and a local precision oscillator that is conditioned by the GPS timing pulses. In addition, we record the carrier-phase measurement of the L1 GPS signal in order to determine location at sub-decimeter accuracy (relative to other geoPebbles within a few kilometers radius). Each geoPebble includes 16 GB of solid-state storage, wireless communications capability to a central supervisory unit, and auxiliary measurements capability (including tilt from accelerometers, absolute orientation from magnetometers and temperature). A novel aspect of the geoPebble is a wireless charging system for the internal battery (using inductive coupling techniques). The geoPebbles include all the sensors (geophones, GPS, microphone), communications (WiFi), and power (battery and charging) internally, so the geoPebble system can operate without any cabling connections (though we do provide an external connector so that different geophones can be used). We report initial field-deployment results and

Education programs at Penn State Breazale Reactor - a focus on waste

International Nuclear Information System (INIS)

Davison, C.

1993-01-01

Discussions about energy policy and issues focus on environmental impact of energy production and the generation of waste. When dealing specifically with nuclear energy, one of the major concerns is the solution to the open-quotes waste problem.close quotes Since there is no repository in the US for the isolation of high-level radioactive waste generated by nuclear power plants, questions and criticism arise concerning this issue. Education is the key to providing information about this issue to help develop a more technologically literate society. Several educational programs and approaches will be discussed including: Penn State University's programs for students and teachers. The US DOE curriculum materials - open-quotes Science, Society and America's Nuclear Waste,close quotes the open-quotes International Workshop on Education in the field of Radioactive Waste Management - at the crossroad of energy, science and environment,close quotes and the American Nuclear Science Teacher's Association

Pennsylvania safe routes to school program.

Science.gov (United States)

2010-10-21

In October 2007, the Center for Nutrition and Activity promotion at Penn State Hershey Children's Hospital (Center) began working under contract with the Pennsylvania Deaprtment of Transportation )PennDOT) to develop, coordinate, and administer the n...

Reporting From the Front Lines: Implementing Oregon's Alternative Payment Methodology in Federally Qualified Health Centers.

Science.gov (United States)

Cottrell, Erika K; Hall, Jennifer D; Kautz, Glenn; Angier, Heather; Likumahuwa-Ackman, Sonja; Sisulak, Laura; Keller, Sara; Cameron, David C; DeVoe, Jennifer E; Cohen, Deborah J

Alternative payment models have been proposed as a way to facilitate patient-centered medical home model implementation, yet little is known about how payment reform translates into changes in care delivery. We conducted site visits, observed operations, and conducted interviews within 3 Federally Qualified Health Center organizations that were part of Oregon's Alternative Payment Methodology demonstration project. Data were analyzed using an immersion-crystallization approach. We identified several care delivery changes during the early stages of implementation, as well as challenges associated with this new model of payment. Future research is needed to further understand the implications of these changes.

Validation of the Penn Acoustic Neuroma Quality-of-Life Scale (PANQOL) for Spanish-Speaking Patients.

Science.gov (United States)

Medina, Maria Del Mar; Carrillo, Alvaro; Polo, Ruben; Fernandez, Borja; Alonso, Daniel; Vaca, Miguel; Cordero, Adela; Perez, Cecilia; Muriel, Alfonso; Cobeta, Ignacio

2017-04-01

Objective To perform translation, cross-cultural adaptation, and validation of the Penn Acoustic Neuroma Quality-of-Life Scale (PANQOL) to the Spanish language. Study Design Prospective study. Setting Tertiary neurotologic referral center. Subjects and Methods PANQOL was translated and translated back, and a pretest trial was performed. The study included 27 individuals diagnosed with vestibular schwannoma. Inclusion criteria were adults with untreated vestibular schwannoma, diagnosed in the past 12 months. Feasibility, internal consistency, test-retest reliability, construct validity, and ceiling and floor effects were assessed for the present study. Results The mean overall score of the PANQOL was 69.21 (0-100 scale, lowest to highest quality of life). Cronbach's α was 0.87. Intraclass correlation coefficient was performed for each item, with an overall score of 0.92. The κ coefficient scores were between moderate and almost perfect in more than 92% of patients. Anxiety and energy domains of the PANQOL were correlated with both physical and mental components of the SF-12. Hearing, balance, and pain domains were correlated with the SF-12 physical component. Facial and general domains were not significantly correlated with any component of the SF-12. Furthermore, the overall score of the PANQOL was correlated with the physical component of the SF-12. Conclusion Feasibility, internal consistency, reliability, and construct validity outcomes in the current study support the validity of the Spanish version of the PANQOL.

The future of acoustics distance education at Penn State

Science.gov (United States)

Brooks, Karen P.; Sparrow, Victor W.; Atchley, Anthony A.

2005-04-01

For nearly 20 years Penn State's Graduate Program in Acoustics has offered a graduate distance education program, established in response to Department of Defense needs. Using satellite technology, courses provided synchronous classes incorporating one-way video and two-way audio. Advancements in technology allowed more sophisticated delivery systems to be considered and courses to be offered to employees of industry. Current technology utilizes real time video-streaming and archived lectures to enable individuals anywhere to access course materials. The evolution of technology, expansion of the geographic market and changing needs of the student, among other issues, require a new paradigm. This paradigm must consider issues such as faculty acceptance and questions facing all institutions with regard to blurring the distinction between residence and distance education. Who will be the students? What will be the purpose of education? Will it be to provide professional and/or research degrees? How will the Acoustics Program ensure it remains attractive to all students, while working within the boundaries and constraints of a major research university? This is a look at current practice and issues with an emphasis on those relevant to constructing the Acoustics Programs distance education strategy for the future.

Evaluation of Student Care Process in Urban and Rural Health Care Centers and Health House in Tabriz Using Tracer Methodology

Directory of Open Access Journals (Sweden)

Neda Kabiri

2015-08-01

Full Text Available Background and Objectives : Tracer methodology is a novel evaluation method which its purpose is to provide an accurate assessment of systems and processes for the delivery of care, treatment, and services at a health care organization. This study aimed to assess student care process in Tabriz using Tracer methodology. Material and Methods : This cross-sectional study was conducted in autumn 1391. Population study consisted of all the students who were covered by Tabriz health care center and study sample included an urban health care center, a rural health care center, a health house, and two schools in urban and rural areas which were selected by simple sampling method. Also, all the complicated and problematic processes were chosen to be assessed. Data were collected by interviewing, observing, and surveying documents and were compared with current standards. Results : The results of this study declared the percentage of points that each target group gained from tracer evaluation in student care process was 77% in health house, 90% in rural health care center and 83% in urban health care center. Findings indicated that documentation was the main weak point. Conclusion : According to the results of this study, student care process is sufficient; despite the fact that there are some deficiencies in caring process, as it may be improved through appropriate strategies. Furthermore, tracer methodology seems to be a proper method to evaluate various levels of health care system. ​

Sea-Level Static Testing of the Penn State Two-Dimensional Rocket-Based Combined Cycle (RBCC) Testbed

Science.gov (United States)

Cramer, J. M.; Marshall, W. M.; Pal, S.; Santoro, R. J.

2003-01-01

Twin thruster tests have been conducted with the Penn State RBCC test article operating at sea- level static conditions. Significant differences were observed in the performance characteristics for two different thruster centerline spacings. Changing the thruster spacing from 2.50 to 1.75 in. reduced the entrained air velocity (-17%) and the thrust (-7%) for tests at a thruster chamber pressure of 200 psia and MR = 8. In addition, significant differences were seen in the static pressure profiles, the Raman spectroscopy profiles, and the acoustic power spectrum for these two configurations.

Displaying a Poster, Unifying a Campus: Undergraduate Research Day at Penn State Wilkes-Barre

Directory of Open Access Journals (Sweden)

Jennie Levine Knies

2015-11-01

Full Text Available This article describes the first official Undergraduate Research Day at Penn State Wilkes-Barre, a small campus with approximately 550 undergraduate students and 8 four-year degree programs. In 2015, an informal planning committee, consisting of two librarians and two faculty members, embarked on a project to turn what had been an informal course assignment into a campus-wide research event.  By remaining flexible, engaged, and open to collaboration, the committee made Undergraduate Research Day in April 2015 a success, and plans are underway to hold this event in subsequent years.  The event energized and motivated students, faculty, and staff on campus and paved the way toward a unified organizational identity on campus.

A demand-centered, hybrid life-cycle methodology for city-scale greenhouse gas inventories.

Science.gov (United States)

Ramaswami, Anu; Hillman, Tim; Janson, Bruce; Reiner, Mark; Thomas, Gregg

2008-09-01

Greenhouse gas (GHG) accounting for individual cities is confounded by spatial scale and boundary effects that impact the allocation of regional material and energy flows. This paper develops a demand-centered, hybrid life-cycle-based methodology for conducting city-scale GHG inventories that incorporates (1) spatial allocation of surface and airline travel across colocated cities in larger metropolitan regions, and, (2) life-cycle assessment (LCA) to quantify the embodied energy of key urban materials--food, water, fuel, and concrete. The hybrid methodology enables cities to separately report the GHG impact associated with direct end-use of energy by cities (consistent with EPA and IPCC methods), as well as the impact of extra-boundary activities such as air travel and production of key urban materials (consistent with Scope 3 protocols recommended by the World Resources Institute). Application of this hybrid methodology to Denver, Colorado, yielded a more holistic GHG inventory that approaches a GHG footprint computation, with consistency of inclusions across spatial scale as well as convergence of city-scale per capita GHG emissions (approximately 25 mt CO2e/person/year) with state and national data. The method is shown to have significant policy impacts, and also demonstrates the utility of benchmarks in understanding energy use in various city sectors.

Methodological Proposal for Optimal Location of Emergency Operation Centers through Multi-Criteria Approach

Directory of Open Access Journals (Sweden)

Umberto Di Matteo

2016-01-01

Full Text Available Territorial vulnerability and risk analysis play a fundamental role in urban planning and emergency management. Requirements analysis of such aspects are possible to define more and more effective risk mitigation strategies providing efficient response plans to events. Many mitigation strategies as well as many response plans have in common the purpose of minimizing response time in order to decrease the level of vulnerability of the concerning area. The response time to a perturbing event is in fact an essential parameter to define the hazard of the considered site and literature is unanimous in considering it. In this context, the article proposes a methodology for the optimization of the location on the territory of emergency operation centers (EOCs, reducing response times and mitigating in this way the vulnerability of the area. The proposed methodology is based on a multi-criteria decision making (MCDM hybrid type AHP (Analytic Hierarchy Process-Electre. This method has been applied in the territory of Bressanone and Vipiteno (Bolzano-Italy, simulating the need to build a new barrack of Fire Department. A campaign of interviews with operators and industry experts and the collection of spatial data from the portals of the concerned authorities has been carried out in order to get the number of necessary data for the implementation of the proposed methodology.

Ask! Your Library at the HUB: Penn State Libraries’ Experiences Providing Reference Services at the Campus Student Union Building

Directory of Open Access Journals (Sweden)

Anne Charlotte Behler

2008-06-01

Full Text Available The Web 2.0 generation presents many service challenges to libraries. College students of today have work styles that emphasize collaboration, preference for flexible and comfortable spaces, and independent discovery of information. Given that challenge, it is important for libraries to experiment with new and unique models of service. Librarians and Staff at the Penn State University Libraries explored offering library service at the main campus’s student union building during two trials, during the Spring and Fall semesters of 2006.

Investigations of groundwater system and simulation of regional groundwater flow for North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

Science.gov (United States)

Senior, Lisa A.; Goode, Daniel J.

2013-01-01

Groundwater in the vicinity of several industrial facilities in Upper Gwynedd Township and vicinity, Montgomery County, in southeast Pennsylvania has been shown to be contaminated with volatile organic compounds (VOCs), the most common of which is the solvent trichloroethylene (TCE). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, and water-level monitoring, and measured streamflows in and near North Penn Area 7 from fall 2000 through fall 2006 in a technical assistance study for the USEPA to develop an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. In addition, the USGS developed a groundwater-flow computer model based on the hydrogeologic framework to simulate regional groundwater flow and to estimate directions of groundwater flow and pathways of groundwater contaminants. The study area is underlain by Triassic- and Jurassic-age sandstones and shales of the Lockatong Formation and Brunswick Group in the Mesozoic Newark Basin. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form a fractured-sedimentary-rock aquifer that acts as a set of confined to partially confined layers of differing permeabilities. Depth to competent bedrock typically is less than 20 ft below land surface. The aquifer layers are recharged locally by precipitation and discharge locally to streams. The general configuration of the potentiometric surface in the aquifer is similar to topography, except in areas affected by pumping. The headwaters of Wissahickon Creek are nearby, and the stream flows southwest, parallel to strike, to bisect North Penn Area 7. Groundwater is pumped in the vicinity of North Penn Area 7 for industrial use, public supply, and residential supply. Results of field investigations

A New Coherent Science Content Storyline Astronomy Course for Pre-Service Teachers at Penn State

Science.gov (United States)

Palma, Christopher; Plummer, Julia; Earth and Space Science Partnership

2016-01-01

The Earth and Space Science Partnership (ESSP) is a collaboration among Penn State scientists, science educators and seven school districts across Pennsylvania. One of the ESSP goals has been to provide pre-service teachers with new or improved science course offerings at Penn State in the Earth and Space Science domains. In particular, we aim to provide students with opportunities to learn astronomy content knowledge through teaching methods that engage them in investigations where they experience the practices used by astronomers. We have designed a new course that builds on our research into students' ideas about Solar System astronomy (Plummer et al. 2015) and the curriculum our team created for a professional development workshop for in-service teachers (Palma et al. 2013) with this same theme. The course was offered for the first time in the spring 2015 semester. We designed the course using a coherent science content storyline approach (see, e.g., Palma et al. 2014), which requires all of the student investigations to build towards a big idea in science; in this case, we chose the model for formation of our Solar System. The course led pre-service teachers through a series of investigations that model the type of instruction we hope they will adopt in their own classrooms. They were presented with a series of research questions that all tie in to the big idea of Solar System formation, and they were responsible for collecting and interpreting their own data to draw evidence-based conclusions about one aspect of this model. Students in the course were assessed on their astronomy content knowledge, but also on their ability to construct arguments using scientific reasoning to answer astronomy questions. In this poster, we will present descriptions of the investigations, the assessments used, and our preliminary results about how the course led this group of pre-service teachers to improved understanding of astronomy content and the practices astronomers use in

FEASIBILITY ANALYSIS FOR INSTALLING A CIRCULATING FLUIDIZED BED BOILER FOR COFIRING MULTIPLE BIOFUELS AND OTHER WASTES WITH COAL AT PENN STATE UNIVERSITY

Energy Technology Data Exchange (ETDEWEB)

Bruce G. Miller; Sharon Falcone Miller; Robert Cooper; John Gaudlip; Matthew Lapinsky; Rhett McLaren; William Serencsits; Neil Raskin; Tom Steitz; Joseph J. Battista

2003-03-26

The Pennsylvania State University, utilizing funds furnished by the U.S. Department of Energy's Biomass Power Program, investigated the installation of a state-of-the-art circulating fluidized bed boiler at Penn State's University Park campus for cofiring multiple biofuels and other wastes with coal, and developing a test program to evaluate cofiring biofuels and coal-based feedstocks. The study was performed using a team that included personnel from Penn State's Energy Institute, Office of Physical Plant, and College of Agricultural Sciences; Foster Wheeler Energy Services, Inc.; Foster Wheeler Energy Corporation; Parsons Energy and Chemicals Group, Inc.; and Cofiring Alternatives. The activities included assessing potential feedstocks at the University Park campus and surrounding region with an emphasis on biomass materials, collecting and analyzing potential feedstocks, assessing agglomeration, deposition, and corrosion tendencies, identifying the optimum location for the boiler system through an internal site selection process, performing a three circulating fluidized bed (CFB) boiler design and a 15-year boiler plant transition plan, determining the costs associated with installing the boiler system, developing a preliminary test program, determining the associated costs for the test program, and exploring potential emissions credits when using the biomass CFB boiler.

Application of NASA Kennedy Space Center system assurance analysis methodology to nuclear power plant systems designs

International Nuclear Information System (INIS)

Page, D.W.

1985-01-01

The Kennedy Space Center (KSC) entered into an agreement with the Nuclear Regulatory Commission (NRC) to conduct a study to demonstrate the feasibility and practicality of applying the KSC System Assurance Analysis (SAA) methodology to nuclear power plant systems designs. In joint meetings of KSC and Duke Power personnel, an agreement was made to select to CATAWBA systems, the Containment Spray System and the Residual Heat Removal System, for the analyses. Duke Power provided KSC with a full set a Final Safety Analysis Reports as well as schematics for the two systems. During Phase I of the study the reliability analyses of the SAA were performed. During Phase II the hazard analyses were performed. The final product of Phase II is a handbook for implementing the SAA methodology into nuclear power plant systems designs. The purpose of this paper is to describe the SAA methodology as it applies to nuclear power plant systems designs and to discuss the feasibility of its application. The conclusion is drawn that nuclear power plant systems and aerospace ground support systems are similar in complexity and design and share common safety and reliability goals. The SAA methodology is readily adaptable to nuclear power plant designs because of it's practical application of existing and well known safety and reliability analytical techniques tied to an effective management information system

Application of NASA Kennedy Space Center System Assurance Analysis methodology to nuclear power plant systems designs

International Nuclear Information System (INIS)

Page, D.W.

1985-01-01

In May of 1982, the Kennedy Space Center (KSC) entered into an agreement with the NRC to conduct a study to demonstrate the feasibility and practicality of applying the KSC System Assurance Analysis (SAA) methodology to nuclear power plant systems designs. North Carolina's Duke Power Company expressed an interest in the study and proposed the nuclear power facility at CATAWBA for the basis of the study. In joint meetings of KSC and Duke Power personnel, an agreement was made to select two CATAWBA systems, the Containment Spray System and the Residual Heat Removal System, for the analyses. Duke Power provided KSC with a full set of Final Safety Analysis Reports (FSAR) as well as schematics for the two systems. During Phase I of the study the reliability analyses of the SAA were performed. During Phase II the hazard analyses were performed. The final product of Phase II is a handbook for implementing the SAA methodology into nuclear power plant systems designs. The purpose of this paper is to describe the SAA methodology as it applies to nuclear power plant systems designs and to discuss the feasibility of its application. (orig./HP)

Clean Energy Manufacturing Analysis Center Benchmark Report: Framework and Methodologies

Energy Technology Data Exchange (ETDEWEB)

Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engel-Cox, Jill [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-05-23

This report documents the CEMAC methodologies for developing and reporting annual global clean energy manufacturing benchmarks. The report reviews previously published manufacturing benchmark reports and foundational data, establishes a framework for benchmarking clean energy technologies, describes the CEMAC benchmark analysis methodologies, and describes the application of the methodologies to the manufacturing of four specific clean energy technologies.

Development of the methodology of sample preparation to X-ray diffractometry of clay minerals at Petrobras Research Center

International Nuclear Information System (INIS)

Alves, D.B.

1987-01-01

Various procedures can be used in the analysis of the clay mineral content of rocks by X-ray diffraction. This article describes the principal ones and discusses those adopted in the X-ray clay mineral laboratory of the PETROBRAS Research Center (CENPES) in Rio de Janeiro. This article presents the methodology used and provides users with information about its application and limitations. The methodology has been developed to study polymineral samples. The aim to identify clay mineral groups and to estimate their relative proportions. Of the four main steps of this analysis - separation and concentration of clay minerals, preparation of oriented specimens, X-ray irradiation under standard conditions and interpretation of X-ray diffraction patterns - only the first three are discussed here. Clay minerals occur mainly in the [pt

Reference Management Methodologies for Large Structural Models at Kennedy Space Center

Science.gov (United States)

Jones, Corey; Bingham, Ryan; Schmidt, Rick

2011-01-01

There have been many challenges associated with modeling some of NASA KSC's largest structures. Given the size of the welded structures here at KSC, it was critically important to properly organize model struc.ture and carefully manage references. Additionally, because of the amount of hardware to be installed on these structures, it was very important to have a means to coordinate between different design teams and organizations, check for interferences, produce consistent drawings, and allow for simple release processes. Facing these challenges, the modeling team developed a unique reference management methodology and model fidelity methodology. This presentation will describe the techniques and methodologies that were developed for these projects. The attendees will learn about KSC's reference management and model fidelity methodologies for large structures. The attendees will understand the goals of these methodologies. The attendees will appreciate the advantages of developing a reference management methodology.

Penn West Energy Trust CO{sub 2} EOR storage monitoring project

Energy Technology Data Exchange (ETDEWEB)

Chalaturnyk, R. [Alberta Univ., Edmonton, AB (Canada)

2007-07-01

This presentation described Penn West Energy Trust's carbon dioxide (CO{sub 2}) enhanced oil recovery (EOR) storage monitoring project. The project formed part of a royalty credit program that offered a royalty reduction to energy companies as part of a plan to encourage the development of a CO{sub 2} storage industry in Alberta. The multi-agency project is expected to provide a better understanding of the fate of CO{sub 2} injected into petroleum reservoirs and the role that CO{sub 2} storage will play in reducing greenhouse gas (GHG) emissions. The project is located in a reservoir that had previously been waterflooded. High purity CO{sub 2} is injected through 2 directional wells. Data acquired from the field is used to provide information on baseline geology and hydrogeology, as well as to provide details of baseline leakages. Rock properties are investigated in order identify issues affecting rock strength. Geophysical monitoring is conducted to interpret baseline seismic profile datasets as well as to integrate active and passive survey analyses with geochemical characterization studies and reservoir models. The project is currently in the stage of developing a simulation model based on a comprehensive understanding of CO{sub 2} injection mechanisms. The model will be used to predict CO{sub 2} storage capacity and movement. refs., tabs., figs.

Development of abbreviated eight-item form of the Penn Verbal Reasoning Test.

Science.gov (United States)

Bilker, Warren B; Wierzbicki, Michael R; Brensinger, Colleen M; Gur, Raquel E; Gur, Ruben C

2014-12-01

The ability to reason with language is a highly valued cognitive capacity that correlates with IQ measures and is sensitive to damage in language areas. The Penn Verbal Reasoning Test (PVRT) is a 29-item computerized test for measuring abstract analogical reasoning abilities using language. The full test can take over half an hour to administer, which limits its applicability in large-scale studies. We previously described a procedure for abbreviating a clinical rating scale and a modified procedure for reducing tests with a large number of items. Here we describe the application of the modified method to reducing the number of items in the PVRT to a parsimonious subset of items that accurately predicts the total score. As in our previous reduction studies, a split sample is used for model fitting and validation, with cross-validation to verify results. We find that an 8-item scale predicts the total 29-item score well, achieving a correlation of .9145 for the reduced form for the model fitting sample and .8952 for the validation sample. The results indicate that a drastically abbreviated version, which cuts administration time by more than 70%, can be safely administered as a predictor of PVRT performance. © The Author(s) 2014.

Development of Abbreviated Eight-Item Form of the Penn Verbal Reasoning Test

Science.gov (United States)

Bilker, Warren B.; Wierzbicki, Michael R.; Brensinger, Colleen M.; Gur, Raquel E.; Gur, Ruben C.

2014-01-01

The ability to reason with language is a highly valued cognitive capacity that correlates with IQ measures and is sensitive to damage in language areas. The Penn Verbal Reasoning Test (PVRT) is a 29-item computerized test for measuring abstract analogical reasoning abilities using language. The full test can take over half an hour to administer, which limits its applicability in large-scale studies. We previously described a procedure for abbreviating a clinical rating scale and a modified procedure for reducing tests with a large number of items. Here we describe the application of the modified method to reducing the number of items in the PVRT to a parsimonious subset of items that accurately predicts the total score. As in our previous reduction studies, a split sample is used for model fitting and validation, with cross-validation to verify results. We find that an 8-item scale predicts the total 29-item score well, achieving a correlation of .9145 for the reduced form for the model fitting sample and .8952 for the validation sample. The results indicate that a drastically abbreviated version, which cuts administration time by more than 70%, can be safely administered as a predictor of PVRT performance. PMID:24577310

Preventing adolescents’ externalizing and internalizing symptoms: Effects of the Penn Resiliency Program

Directory of Open Access Journals (Sweden)

J. J. Cutuli

2013-11-01

Full Text Available This study reports secondary outcome analyses from a past study of the Penn Resiliency Program (PRP, a cognitive-behavioral depression prevention program for middle-school aged children. Middle school students (N = 697 were randomly assigned to PRP, PEP (an alternate intervention, or control conditions. Gillham et al., (2007 reported analyses examining PRP’s effects on average and clinical levels of depression symptoms. We examine PRP’s effects on parent-, teacher-, and self-reports of adolescents’ externalizing and broader internalizing (depression/anxiety, somatic complaints, and social withdrawal symptoms over three years of follow-up. Relative to no intervention control, PRP reduced parent-reports of adolescents’ internalizing symptoms beginning at the first assessment after the intervention and persisting for most of the follow-up assessments. PRP also reduced parent-reported conduct problems relative to no-intervention. There was no evidence that the PRP program produced an effect on teacher- or self-report of adolescents’ symptoms. Overall, PRP did not reduce symptoms relative to the alternate intervention, although there is a suggestion of a delayed effect for conduct problems. These findings are discussed with attention to developmental trajectories and the importance of interventions that address common risk factors for diverse forms of negative outcomes.

Final report to DOE: Matching Grant Program for the Penn State University Nuclear Engineering Program

International Nuclear Information System (INIS)

Jack S. Brenizer, Jr.

2003-01-01

The DOE/Industry Matching Grant Program is designed to encourage collaborative support for nuclear engineering education as well as research between the nation's nuclear industry and the U.S. Department of Energy (DOE). Despite a serious decline in student enrollments in the 1980s and 1990s, the discipline of nuclear engineering remained important to the advancement of the mission goals of DOE. The program is designed to ensure that academic programs in nuclear engineering are maintained and enhanced in universities throughout the U.S. At Penn State, the Matching Grant Program played a critical role in the survival of the Nuclear Engineering degree programs. Funds were used in a variety of ways to support both undergraduate and graduate students directly. Some of these included providing seed funding for new graduate research initiatives, funding the development of new course materials, supporting new teaching facilities, maintenance and purchase of teaching laboratory equipment, and providing undergraduate scholarships, graduate fellowships, and wage payroll positions for students

Recent Advances in Durability and Damage Tolerance Methodology at NASA Langley Research Center

Science.gov (United States)

Ransom, J. B.; Glaessgen, E. H.; Raju, I. S.; Harris, C. E.

2007-01-01

Durability and damage tolerance (D&DT) issues are critical to the development of lighter, safer and more efficient aerospace vehicles. Durability is largely an economic life-cycle design consideration whereas damage tolerance directly addresses the structural airworthiness (safety) of the vehicle. Both D&DT methodologies must address the deleterious effects of changes in material properties and the initiation and growth of damage that may occur during the vehicle s service lifetime. The result of unanticipated D&DT response is often manifested in the form of catastrophic and potentially fatal accidents. As such, durability and damage tolerance requirements must be rigorously addressed for commercial transport aircraft and NASA spacecraft systems. This paper presents an overview of the recent and planned future research in durability and damage tolerance analytical and experimental methods for both metallic and composite aerospace structures at NASA Langley Research Center (LaRC).

Indissoluble Connection of Russian MC and A System Sustainability with that of the Russian Methodological and Training Center

International Nuclear Information System (INIS)

Ryazanov, Boris G.; Goryunov, Victor; Pshakin, Gennady M.; Shapsha, V.; Crawford, Cary E.; Dickman, Deborah A.

2005-01-01

During the past 10 years of collaboration under the U.S.-Russian Materials Protection, Control and Accounting (MPC and A) Program great efforts were made to transform and upgrade the Russian Federal Nuclear Materials Control and Accounting (MC and A) System. The efforts were focused not only on MC and A systems for nuclear facilities but also on creating and developing the system infrastructure, including legislation, state inspection and agency monitoring, training of operators and inspectors, instrument and methodological support, and the Federal Information System (FIS). At present the most important and urgent goal is to provide sustainability of MC and A systems at the existing level or at the level that will be achieved in 2007-2008. Since the very beginning of the program, the Russian Methodological and Training Center (RMTC) activities have been focused on intensive training of the personnel as well as the methodological support necessary for transformation and development of the entire system and its elements located at nuclear facilities. Sustainability of the federal MC and A system is impossible without advanced training of personnel and methodological support for upgrading of system elements at nuclear facilities. That is why the RMTC sustainability is one of the key conditions required for the system sustainability as a whole. The paper presents the results of analysis of the conditions for the Russian MC and A system sustainable development in conjunction with the RMTC sustainability

Variations in PET/CT methodology for oncologic imaging at U.S. academic medical centers: an imaging response assessment team survey.

Science.gov (United States)

Graham, Michael M; Badawi, Ramsey D; Wahl, Richard L

2011-02-01

In 2005, 8 Imaging Response Assessment Teams (IRATs) were funded by the National Cancer Institute (NCI) as supplemental grants to existing NCI Cancer Centers. After discussion among the IRATs regarding the need for increased standardization of clinical and research PET/CT methodology, it became apparent that data acquisition and processing approaches differ considerably among centers. To determine the variability in detail, a survey of IRAT sites and IRAT affiliates was performed. A 34-question instrument evaluating patient preparation, scanner type, performance approach, display, and analysis was developed. Fifteen institutions, including the 8 original IRATs and 7 institutions that had developed affiliate IRATs, were surveyed. The major areas of variation were (18)F-FDG dose (259-740 MBq [7-20 mCi]) uptake time (45-90 min), sedation (never to frequently), handling of diabetic patients, imaging time (2-7 min/bed position), performance of diagnostic CT scans as a part of PET/CT, type of acquisition (2-dimensional vs. 3-dimensional), CT technique, duration of fasting (4 or 6 h), and (varying widely) acquisition, processing, display, and PACS software--with 4 sites stating that poor-quality images appear on PACS. There is considerable variability in the way PET/CT scans are performed at academic institutions that are part of the IRAT network. This variability likely makes it difficult to quantitatively compare studies performed at different centers. These data suggest that additional standardization in methodology will be required so that PET/CT studies, especially those performed quantitatively, are more comparable across sites.

4th Penn State Bioinorganic Workshop

Energy Technology Data Exchange (ETDEWEB)

Krebs, Carsten [Pennsylvania State Univ., University Park, PA (United States)

2017-08-22

Pennsylvania State University and our unique laboratory space are well suited for the continuation of such training workshops. The co-principal investigators of this award lead these efforts. After a smaller “trial workshop” in 2010, the Penn State bioinorganic group, led by the co-PIs, offers these workshops biennially. The 2012, 2014, and 2016 workshops provided training to 123, 162, and 153 participants, respectively, by offering (i) a series of lectures given by faculty experts on the given topic, (ii) hands-on training in small groups by experts in the various methods, and (iii) sharing research results of the participants by oral and poster presentations. The centerpiece of the workshops is the hands-on training, in which approximately half of the participants from all ranks (undergraduate students to faculty) served as teachers. In this section, the traditional roles of teachers and students were sometimes reversed to the extent that undergraduate students taught faculty in the students' areas of specialty. We anticipate that these workshops will facilitate research in bioinorganic chemistry and will help establish future collaborations among “workshop alumni” to carry out cutting-edge research in bioinorganic chemistry that will address many important topics relevant to our society.

RESOURCE TRAINING AND METHODOLOGICAL CENTER FOR THE TRAINING OF PEOPLE WITH DISABILITIES: EXPERIENCE AND DIRECTION OF DEVELOPMENT

Directory of Open Access Journals (Sweden)

A. A. Fedorov

2018-01-01

Full Text Available Introduction: The presented article is devoted to the new and actual direction in the system of higher education - the development of inclusive education. The experience of creating a resource training and methodological center (RТMC of the University of Minin in 2017 is presented, the directions of its activity in 2017 and the results are described. The article outlines the role of RТMC in the development of inclusive culture.Materials and methods: The method of analyzing the literature of domestic and foreign authors was used as the basis for writing the article; the monitoring data of the state of inclusive higher education, which was implemented within the framework of the State Contract dated 07.06.2016 No. 05.020.11 007 on the project «Monitoring Information and Analytical Support of Activities regional resource centers for higher education for disabled people».Results: Analyzing the results of the RТMC activity, the authors update the problems that arose during the project implementation and suggest ways of their solution. The authors see the development of the RТMC activity through the development of forms and mechanisms of interdepartmental, interregional and inter-institutional cooperation in order to achieve coherence of actions and effectiveness of all participants in the support of inclusion in higher education, taking into account the educational needs of entrants and labor market needs throughout the fixed territory. As a special mission of the RТMC, the authors see the management of the development of inclusive culture in the university. The system of higher education is considered as an instrument of fulfilling the social order for the formation of a generation of people who tolerate and organically perceive the fact of inclusion in all spheres of life.Discussion and conclusion: The role of the resource training and methodological center in the development of inclusive higher education is determined by the identification

Návrh zásobníku na sypký vápenný hydrát

OpenAIRE

Perna, Marek

2009-01-01

Tato diplomová práce řeší návrh hlubokého zásobníku na sypký vápenný hydrát pro technologická zařízení čistíren odpadních vod. Je zde proveden rozbor volby typu a konstrukce zásobníku, návrh rozměrů a pevnostní výpočet zásobníku. Je zde popsána možnost vzniku klenby při vyprazdňování a její potlačení pomocí aktivních a pasivních prvků napomáhající toku. Popis aktivních a pasivních stavů napjatosti materiálu v zásobníku. This diploma thesis is solving systems design of silo for a powdery li...

Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Freihaut, Jim [Pennsylvania State Univ., University Park, PA (United States)

2013-09-30

The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

The contribution of skin blood flow in warming the skin after the application of local heat; the duality of the Pennes heat equation.

Science.gov (United States)

Petrofsky, Jerrold; Paluso, Dominic; Anderson, Devyn; Swan, Kristin; Yim, Jong Eun; Murugesan, Vengatesh; Chindam, Tirupathi; Goraksh, Neha; Alshammari, Faris; Lee, Haneul; Trivedi, Moxi; Hudlikar, Akshay N; Katrak, Vahishta

2011-04-01

As predicted by the Pennes equation, skin blood flow is a major contributor to the removal of heat from an external heat source. This protects the skin from erythema and burns. But, for a person in a thermally neutral room, the skin is normally much cooler than arterial blood. Therefore, if skin blood flow (BF) increases, it should initially warm the skin paradoxically. To examine this phenomenon, 10 young male and female subjects participated in a series of experiments to examine the contribution of skin blood flow in the initial warming the skin after the application of local heat. Heat flow was measured by the use of a thermode above the brachioradialis muscle. The thermode was warmed by constant temperature water at 44°C entering the thermode at a water flow rate of 100 cm(3)/min. Skin temperature was measured by a thermistor and blood flow in the underlying skin was measured by a laser Doppler imager in single point mode. The results of the experiments showed that, when skin temperature is cool (31-32°C), the number of calories being transferred to the skin from the thermode cannot account for the rise in skin temperature alone. A significant portion of the rise in skin temperature is due to the warm arterialized blood traversing the skin from the core areas of the body. However, as skin temperature approaches central core temperature, it becomes less of a heat source and more of a heat sync such that when skin temperature is at or above core temperature, the blood flow to the skin, as predicted by Pennes, becomes a heat sync pulling heat from the thermode. Copyright © 2010 IPEM. Published by Elsevier Ltd. All rights reserved.

Interdepartmental interaction model on the extracurricular activities of students in the city of Surgut in the quality management system of the municipal state institution "Information and Methodological Center"

OpenAIRE

Loseva E. A.

2018-01-01

in this article the author considers interdepartmental interaction model in the field of extracurricular activities of students in the quality management system. The topic is examined on the example of the municipal state institution "Information and Methodological Center".

Reflective Methodology: The Beginning Teacher

Science.gov (United States)

Templeton, Ronald K.; Siefert, Thomas E.

1970-01-01

Offers a variety of specific techniques which will help the beginning teacher to implement reflective methodology and create an inquiry-centered classroom atmosphere, at the same time meeting the many more pressing demands of first-year teaching. (JES)

Methodology for Multileaf Collimator Quality Assurance in clinical conditions

International Nuclear Information System (INIS)

Diaz M, R. M.; Rodriguez Z, M.; Juarez D, A.; Romero R, R.

2013-01-01

Multileaf Collimators (MLCs) have become an important technological advance as part of clinical linear accelerators (linacs) for radiotherapy. Treatment planning and delivery were substantially modified after these devices. However, it was needed to develop Quality Assurance (QA) methodologies related to the performance of these developments. The most common methods for QA of MLC are made in basic conditions that hardly cover all possible difficulties in clinical practice. Diaz et. el. developed a methodology based upon volumetric detectors bidimensional arrays that can be extended to more demanding situations. In this work, the Auril methodology of Diaz et. al. was implemented to the irradiation with the linac gantry in horizontal position. A mathematical procedure was developed to ease the dosimetric centering of the device with the Auril centering tool. System calibration was made as in the typical Auril methodology. Patterns with leaf misplacements in known positions were irradiated. the method allowed the detection of leafs' misplacements with a minimum number of false positives. We concluded that Auril methodology can be applied in clinical conditions. (Author)

Stepping up for Childhood: A Contextual Critical Methodology

Science.gov (United States)

Kyriacopoulos, Konstantine; Sánchez, Marta

2017-01-01

In this paper, we theorize a critical methodology for education centering community experiences of systemic injustice, drawing upon Critical Race Theory, critical educational leadership studies, Chicana feminism, participant action research and political theory, to refocus our work on the human relationships at the center of the learning and…

LINKING CLASSROOM AND COMMUNITY: A THEORETICAL ALIGNMENT OF SERVICE LEARNING AND A HUMAN-CENTERED DESIGN METHODOLOGY IN CONTEMPORARY COMMUNICATION DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Anneli Bowie

2016-04-01

Full Text Available The current emphasis on social responsibility and community collaboration within higher education has led to an increased drive to include service learning in the curriculum. With its emphasis on mutually beneficial collaborations, service learning can be meaningful for both students and the community, but is challenging to manage successfully. From a design education perspective, it is interesting to note that contemporary design practice emphasises a similar approach known as a human-centered design, where users are considered and included throughout the design process. In considering both service learning and human-centred design as foundations for design pedagogy, various philosophical and methodological similarities are evident. The paper explores the relationship between a service learning community engagement approach and a human-centered design approach in contemporary communication design education. To this end, each approach is considered individually after which a joint frame of reference is presented. Butin’s service learning typology, namely the four Rs – respect, reciprocity, relevance and reflection – serves as a point of departure for the joint frame of reference. Lastly, the potential value and relevance of a combined understanding of service learning and human-centered design is considered.

Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Vol. IV. A site selection methodology

International Nuclear Information System (INIS)

Rosemarin, C.S.; Yaffee, S.L.

1976-09-01

A methodology has been developed for selecting suitable sites for development as nuclear energy centers. First, the forty-eight contiguous states were screened on the basis of four variables: (1) seismic stability; (2) distance from projected population centers; (3) adequate water supply; and (4) noninterference with scenic and reserved lands. After location of a surrogate area in north central Tennessee, further screening was performed using 22 variables to find a suitable 75-sq-mile surrogate site within this 1500-sq-mile area. A computer method for screening the surrogate area is presented, and the use of the data for the 22 variables is illustrated

Adaptación al idioma español de la escala del Penn State College of Medicine para medición del profesionalismo en estudiantes de medicina

Directory of Open Access Journals (Sweden)

Eliseo Bustamante

2014-06-01

Full Text Available Introducción. El profesionalismo es un área de interés en las facultades de medicina del mundo. El uso de un cuestionario puede ser útil para evaluar el profesionalismo en Colombia. Objetivo. Adaptar la escala de profesionalismo para estudiantes de medicina del Penn State University College of Medicine al idioma español como instrumento válido para evaluarlo. Materiales y métodos. Se siguieron las guías para adaptación de instrumentos del proyecto IQOLA, realizando traducción y traducción inversa, así como una prueba piloto y una evaluación de las características psicométricas en 250 estudiantes. Se evaluó la correlación entre ítems y escala y la validez interna con el alfa de Chronbach y se hizo un análisis factorial de componentes principales. Resultados. El alfa de Cronbach global fue de 0,86, la medida de Kaiser-Meyer-Olkin fue de 0,83 y el test de esfericidad de Bartlett tuvo un valor de p>0,00001. Se encontraron seis factores que explicaron 93 % de la varianza total y cuatro nuevos factores que emergieron del análisis factorial. Ocho ítems tuvieron alta singularidad. Conclusión. La escala del Penn State University College of Medicine mide con buen nivel de confiabilidad las actitudes hacia el profesionalismo en los estudiantes de medicina. No obstante, la estructura de la escala mostró diferencias al ser validada en estudiantes latinoamericanos.

Severe transient analysis of the Penn State University Advanced Light Water Reactor

International Nuclear Information System (INIS)

Borkowski, J.A.

1988-08-01

The Penn State University Advanced Light Water Reactor (PSU ALWR) incorporates various passive and active ultra-safe features, such as continuous online injection and letdown for pressure control, a raised-loop primary system for enhanced natural circulation, a dedicated primary reservoir for enhanced thermal hydraulic control, and a secondary shutdown turbine. Because of the conceptual design basis of the project, the dynamic system modeling was to be performed using a code with a high degree of flexibility. For this reason the modeling has been performed with the Modular Modeling System (MMS). The basic design and normal transients have been performed successfully with MMS. However, the true test of an inherently safe concept lies in its response to more brutal transients. Therefore, such a demonstrative transient is chosen for the PSU ALWR: a turbine trip and reactor scram, concurrent with total loss of offsite ac power. Diesel generators are likewise unavailable. This transient demonstrates the utility of the pressure control system, the shutdown turbine generator, and the enhanced natural circulation of the PSU ALWR. The low flow rates, low pressure drops, and large derivative states encountered in such a transient pose special problems for the modeler and for MMS. The results of the transient analyses indicate excellent performance by the PSU ALWR in terms of inherently safe operation. The primary coolant enters full natural circulation, and removes all decay heat through the steam generators. Further, the steam generators continually supply sufficient steam to the shutdown power system, despite the abrupt changeover to the auxiliary feedwater system. Finally, even with coincident failures in the pressurization system, the primary repressurizes to near-normal values, without overpressurization. No core boiling or uncovery is predicted, and consequently fuel damage is avoided. 17 refs., 19 figs., 4 tabs

Use of the modular modeling system in the design of the Penn State Advanced Light Water Reactor

International Nuclear Information System (INIS)

Smith, K.A.

1988-12-01

This study involves the design and subsequent transient analysis of the Penn State Advanced Light Water Reactor (PSU ALWR). The performance of the PSU ALWR is evaluated during small step changes in power and a turbine trip from full power without scram. The Modular Modeling System (MMS), developed by Babcock and Wilcox under a contract from the Electric Power Research Institute (EPRI), is a computer code designed for the simulation of nuclear and fossil power plants. MMS uses preprogrammed modules to represent specific power plant components such as pipes, pumps, steam generators, and a nuclear reactor. These components can then be connected in any manner the user desires providing certain simple interconnection rules are followed. In this study, MMS is used to develop computer models of both the PSU ALWR and a conventional PWR operating at the same power level. These models are then subjected to the transients mentioned above to evaluate the ability of the letdown-injection system to maintain primary system pressure. The transient response of the PSU ALWR and conventional PWR MMS models were compared to each other and whenever possible to actual plant transient data. 14 refs., 29 figs., 5 tabs

Effects of changes in pumping on regional groundwater-flow paths, 2005 and 2010, and areas contributing recharge to discharging wells, 1990–2010, in the vicinity of North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

Science.gov (United States)

Senior, Lisa A.; Goode, Daniel J.

2017-06-06

A previously developed regional groundwater flow model was used to simulate the effects of changes in pumping rates on groundwater-flow paths and extent of recharge discharging to wells for a contaminated fractured bedrock aquifer in southeastern Pennsylvania. Groundwater in the vicinity of the North Penn Area 7 Superfund site, Montgomery County, Pennsylvania, was found to be contaminated with organic compounds, such as trichloroethylene (TCE), in 1979. At the time contamination was discovered, groundwater from the underlying fractured bedrock (shale) aquifer was the main source of supply for public drinking water and industrial use. As part of technical support to the U.S. Environmental Protection Agency (EPA) during the Remedial Investigation of the North Penn Area 7 Superfund site from 2000 to 2005, the U.S. Geological Survey (USGS) developed a model of regional groundwater flow to describe changes in groundwater flow and contaminant directions as a result of changes in pumping. Subsequently, large decreases in TCE concentrations (as much as 400 micrograms per liter) were measured in groundwater samples collected by the EPA from selected wells in 2010 compared to 2005‒06 concentrations.To provide insight on the fate of potentially contaminated groundwater during the period of generally decreasing pumping rates from 1990 to 2010, steady-state simulations were run using the previously developed groundwater-flow model for two conditions prior to extensive remediation, 1990 and 2000, two conditions subsequent to some remediation 2005 and 2010, and a No Pumping case, representing pre-development or cessation of pumping conditions. The model was used to (1) quantify the amount of recharge, including potentially contaminated recharge from sources near the land surface, that discharged to wells or streams and (2) delineate the areas contributing recharge that discharged to wells or streams for the five conditions.In all simulations, groundwater divides differed from

Flow visualization of three-dimensionality inside the 12 cc Penn State pulsatile pediatric ventricular assist device.

Science.gov (United States)

Roszelle, Breigh N; Deutsch, Steven; Manning, Keefe B

2010-02-01

In order to aid the ongoing concern of limited organ availability for pediatric heart transplants, Penn State has continued development of a pulsatile Pediatric Ventricular Assist Device (PVAD). Initial studies of the PVAD observed an increase in thrombus formation due to differences in flow field physics when compared to adult sized devices, which included a higher degree of three-dimensionality. This unique flow field brings into question the use of 2D planar particle image velocimetry (PIV) as a flow visualization technique, however the small size and high curvature of the PVAD make other tools such as stereoscopic PIV impractical. In order to test the reliability of the 2D results, we perform a pseudo-3D PIV study using planes both parallel and normal to the diaphragm employing a mock circulatory loop containing a viscoelastic fluid that mimics 40% hematocrit blood. We find that while the third component of velocity is extremely helpful to a physical understanding of the flow, particularly of the diastolic jet and the development of a desired rotational pattern, the flow data taken parallel to the diaphragm is sufficient to describe the wall shear rates, a critical aspect to the study of thrombosis and design of such pumps.

Validation of the facial dysfunction domain of the Penn Acoustic Neuroma Quality-of-Life (PANQOL) Scale.

Science.gov (United States)

Lodder, Wouter L; Adan, Guleed H; Chean, Chung S; Lesser, Tristram H; Leong, Samuel C

2017-06-01

The objective of this study is to evaluate the strength of content validity within the facial dysfunction domain of the Penn Acoustic Neuroma Quality-of-Life (PANQOL) Scale and to compare how it correlates with a facial dysfunction-specific QOL instrument (Facial Clinimetric Evaluation, FaCE). The study design is online questionnaire survey. Members of the British Acoustic Neuroma Association received both PANQOL questionnaires and the FaCE scale. 158 respondents with self-identified facial paralysis or dysfunction had completed PANQOL and FaCE data sets for analysis. The mean composite PANQOL score was 53.5 (range 19.2-93.5), whilst the mean total FaCE score was 50.9 (range 10-95). The total scores of the PANQOL and FaCE correlated moderate (r = 0.48). Strong correlation (r = 0.63) was observed between the PANQOL's facial dysfunction domain and the FaCE total score. Of all the FaCE domains, social function was strongly correlated with the PANQOL facial dysfunction domain (r = 0.66), whilst there was very weak-to-moderate correlation (range 0.01-0.43) to the other FaCE domains. The current study has demonstrated a strong correlation between the facial dysfunction domains of PANQOL with a facial paralysis-specific QOL instrument.

Application of Agent Methodology in Healthcare Information Systems

Directory of Open Access Journals (Sweden)

Reem Abdalla

2017-02-01

Full Text Available This paper presents a case study to describe the features and the phases of the two agent methodologies. The Gaia methodology for agent oriented analysis and design, Tropos is a detailed agent oriented software engineering methodology to explore each methodology's ability to present solutions for small problems. Also we provide an attempt to discover whether the methodology is in fact understandable and usable. In addition we were collecting and taking notes of the advantages and weaknesses of these methodologies during the study analysis for each methodology and the relationships among their models. The Guardian Angle: Patient-Centered Health Information System (GA: PCHIS is the personal system to help track, manage, and interpret the subject's health history, and give advice to both patient and provider is used as the case study throughout the paper.

A customizable, scalable scheduling and reporting system.

Science.gov (United States)

Wood, Jody L; Whitman, Beverly J; Mackley, Lisa A; Armstrong, Robert; Shotto, Robert T

2014-06-01

Scheduling is essential for running a facility smoothly and for summarizing activities in use reports. The Penn State Hershey Clinical Simulation Center has developed a scheduling interface that uses off-the-shelf components, with customizations that adapt to each institution's data collection and reporting needs. The system is designed using programs within the Microsoft Office 2010 suite. Outlook provides the scheduling component, while the reporting is performed using Access or Excel. An account with a calendar is created for the main schedule, with separate resource accounts created for each room within the center. The Outlook appointment form's 2 default tabs are used, in addition to a customized third tab. The data are then copied from the calendar into either a database table or a spreadsheet, where the reports are generated.Incorporating this system into an institution-wide structure allows integration of personnel lists and potentially enables all users to check the schedule from their desktop. Outlook also has a Web-based application for viewing the basic schedule from outside the institution, although customized data cannot be accessed. The scheduling and reporting functions have been used for a year at the Penn State Hershey Clinical Simulation Center. The schedule has increased workflow efficiency, improved the quality of recorded information, and provided more accurate reporting. The Penn State Hershey Clinical Simulation Center's scheduling and reporting system can be adapted easily to most simulation centers and can expand and change to meet future growth with little or no expense to the center.

A usage-centered evaluation methodology for unmanned ground vehicles

NARCIS (Netherlands)

Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

2012-01-01

This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of

A theoretical and experimental investigation of propeller performance methodologies

Science.gov (United States)

Korkan, K. D.; Gregorek, G. M.; Mikkelson, D. C.

1980-01-01

This paper briefly covers aspects related to propeller performance by means of a review of propeller methodologies; presentation of wind tunnel propeller performance data taken in the NASA Lewis Research Center 10 x 10 wind tunnel; discussion of the predominent limitations of existing propeller performance methodologies; and a brief review of airfoil developments appropriate for propeller applications.

Preliminary Normative Data on the Penn State University Symbol Cancellation Task With Nonconcussed Adolescents.

Science.gov (United States)

Conder, Robert L; Conder, Alanna A; Register-Mihalik, Johna; Conder, Lauren H; Newton, Shannon

2015-01-01

Visual concentration impairment after neurologic injury is frequent, making its identification a critical component of neurocognitive concussion assessment. Visual target cancellation tests such as the Penn State University Symbol Cancellation Task (PSUSCT) have been widely used in assessing professional and collegiate athletes. To date, there are no normative studies using the PSUSCT with an adolescent population. Given that 38 million children and adolescents participate in sports and an estimated 5% to 10% are concussed annually, adolescent normative data are critically needed to evaluate concussions in this vulnerable population. The purpose of this study was to provide adolescent normative data on the PSUSCT. Participants included 40 healthy, nonconcussed high school students aged 14 to 19 years old (20 men, 20 women). Participants were administered Forms A and C of the PSUSCT within a 4-day period. Data analysis examined hits, omission errors, and commission errors, with descriptive statistics calculated for the total sample and for subgroups by gender and age. Study 1 provided normative adolescent data on Form A. Study 2 examined practice effects and established reliable change indexes (RCIs) by comparing results on Forms A and C. Neither Study 1 nor Study 2 demonstrated significant group differences for gender or age. In conclusion, this study presents adolescent normative data, apparent practice effects, and RCIs on the PSUSCT. These norms provide data needed to appropriately include the PSUSCT in baseline and postinjury concussion evaluation batteries with adolescent student-athletes. Findings should be replicated with a larger, more heterogeneous sample.

Building an integrated neurodegenerative disease database at an academic health center.

Science.gov (United States)

Xie, Sharon X; Baek, Young; Grossman, Murray; Arnold, Steven E; Karlawish, Jason; Siderowf, Andrew; Hurtig, Howard; Elman, Lauren; McCluskey, Leo; Van Deerlin, Vivianna; Lee, Virginia M-Y; Trojanowski, John Q

2011-07-01

It is becoming increasingly important to study common and distinct etiologies, clinical and pathological features, and mechanisms related to neurodegenerative diseases such as Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, and frontotemporal lobar degeneration. These comparative studies rely on powerful database tools to quickly generate data sets that match diverse and complementary criteria set by them. In this article, we present a novel integrated neurodegenerative disease (INDD) database, which was developed at the University of Pennsylvania (Penn) with the help of a consortium of Penn investigators. Because the work of these investigators are based on Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, and frontotemporal lobar degeneration, it allowed us to achieve the goal of developing an INDD database for these major neurodegenerative disorders. We used the Microsoft SQL server as a platform, with built-in "backwards" functionality to provide Access as a frontend client to interface with the database. We used PHP Hypertext Preprocessor to create the "frontend" web interface and then used a master lookup table to integrate individual neurodegenerative disease databases. We also present methods of data entry, database security, database backups, and database audit trails for this INDD database. Using the INDD database, we compared the results of a biomarker study with those using an alternative approach by querying individual databases separately. We have demonstrated that the Penn INDD database has the ability to query multiple database tables from a single console with high accuracy and reliability. The INDD database provides a powerful tool for generating data sets in comparative studies on several neurodegenerative diseases. Copyright © 2011 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Feasibility Study of Commercial Markets for New Sample Acquisition Devices

Science.gov (United States)

Brady, Collin; Coyne, Jim; Bilen, Sven G.; Kisenwether, Liz; Miller, Garry; Mueller, Robert P.; Zacny, Kris

2010-01-01

The NASA Exploration Systems Mission Directorate (ESMD) and Penn State technology commercialization project was designed to assist in the maturation of a NASA SBIR Phase III technology. The project was funded by NASA's ESMD Education group with oversight from the Surface Systems Office at NASA Kennedy Space Center in the Engineering Directorate. Two Penn State engineering student interns managed the project with support from Honeybee Robotics and NASA Kennedy Space Center. The objective was to find an opportunity to integrate SBIR-developed Regolith Extractor and Sampling Technology as the payload for the future Lunar Lander or Rover missions. The team was able to identify two potential Google Lunar X Prize organizations with considerable interest in utilizing regolith acquisition and transfer technology.

Development of Innovative Radioactive Isotope Production Techniques at the Pennsylvania State University Radiation Science and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

Johnsen, Amanda M. [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Heidrich, Brenden [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Durrant, Chad [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Bascom, Andrew [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Unlu, Kenan [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center

2013-08-15

The Penn State Breazeale Nuclear Reactor (PSBR) at the Radiation Science and Engineering Center (RSEC) has produced radioisotopes for research and commercial purposes since 1956. With the rebirth of the radiochemistry education and research program at the RSEC, the Center stands poised to produce a variety of radioisotopes for research and industrial work that is in line with the mission of the DOE Office of Science, Office of Nuclear Physics, Isotope Development and Production Research and Application Program. The RSEC received funding from the Office of Science in 2010 to improve production techniques and develop new capabilities. Under this program, we improved our existing techniques to provide four radioisotopes (Mn-56, Br-82, Na-24, and Ar-41) to researchers and industry in a safe and efficient manner. The RSEC is also working to develop new innovative techniques to provide isotopes in short supply to researchers and others in the scientific community, specifically Cu-64 and Cu-67. Improving our existing radioisotopes production techniques and investigating new and innovative methods are two of the main initiatives of the radiochemistry research program at the RSEC.

Single-center trials in neonatology: Issues to consider.

Science.gov (United States)

Sinha, Ian P; Sinha, Sunil K

2015-12-01

Single-center randomized controlled trials confer certain advantages over multi-center trials, in that they are cheaper and easier to design and conduct. However, recent research suggests that single-center trials are likely to overestimate treatment effects. There are notable examples in neonatology where results from multi-center trials have contradicted results of single-center studies. In this paper we discuss issues around external generalizability of single-center studies, and methodological issues that may cause bias. Copyright © 2015 Elsevier Ltd. All rights reserved.

Employee health benefit redesign at the academic health center: a case study.

Science.gov (United States)

Marshall, Julie; Weaver, Deirdre C; Splaine, Kevin; Hefner, David S; Kirch, Darrell G; Paz, Harold L

2013-03-01

The rapidly escalating cost of health care, including the cost of providing health care benefits, is a significant concern for many employers. In this article, the authors examine a case study of an academic health center that undertook a complete redesign of its health benefit structure to control rising costs, encourage use of its own provider network, and support employee wellness. With the implementation in 2006 of a high-deductible health plan combined with health reimbursement arrangements and wellness incentives, the Penn State Hershey Medical Center (PSHMC) was able to realize significant cost savings and increase use of its own network while maintaining a high level of employee satisfaction. By contracting with a single third-party administrator for its self-insured plan, PSHMC reduced its administrative costs and simplified benefit choices for employees. In addition, indexing employee costs to salary ensured that this change was equitable for all employees, and the shift to a consumer-driven health plan led to greater employee awareness of health care costs. The new health benefit plan's strong focus on employee wellness and preventive health has led to significant increases in the use of preventive health services, including health risk assessments, cancer screenings, and flu shots. PSHMC's experience demonstrates the importance of clear and ongoing communication with employees throughout--before, during, and even after--the process of health benefit redesign.

Strategic knowledge management: a methodology for structuring and analysing knowledge resources

International Nuclear Information System (INIS)

Ricciardi, Rita Izabel

2009-01-01

This work presents a methodology to organize, to classify and to assess the knowledge resources of an organization. This methodology presents an innovative integration of the following elements: (a) a systemic vision of the organization; (b) a representation maps of organization strategy; (c) the identification of relevant knowledge through process analysis; (d) the reconfiguration and representation of the identified knowledge in maps; (e) a combination of critical analysis (importance and vulnerability) and of strategic analysis to assess knowledge. Such methodology was applied to the Radiopharmaceutical Center of Nuclear and Energetic Research Institute resulting in a very rich vision and understanding of the knowledge domains that are crucial to the CR. This kind of analysis has allowed a sharp perception of the knowledge problems of the Center and has also made visible the needed connections between Strategic Management and Knowledge Management. (author)

Ongoing Analyses of Rocket Based Combined Cycle Engines by the Applied Fluid Dynamics Analysis Group at Marshall Space Flight Center

Science.gov (United States)

Ruf, Joseph H.; Holt, James B.; Canabal, Francisco

2001-01-01

This paper presents the status of analyses on three Rocket Based Combined Cycle (RBCC) configurations underway in the Applied Fluid Dynamics Analysis Group (TD64). TD64 is performing computational fluid dynamics (CFD) analysis on a Penn State RBCC test rig, the proposed Draco axisymmetric RBCC engine and the Trailblazer engine. The intent of the analysis on the Penn State test rig is to benchmark the Finite Difference Navier Stokes (FDNS) code for ejector mode fluid dynamics. The Draco analysis was a trade study to determine the ejector mode performance as a function of three engine design variables. The Trailblazer analysis is to evaluate the nozzle performance in scramjet mode. Results to date of each analysis are presented.

Ongoing Analysis of Rocket Based Combined Cycle Engines by the Applied Fluid Dynamics Analysis Group at Marshall Space Flight Center

Science.gov (United States)

Ruf, Joseph; Holt, James B.; Canabal, Francisco

1999-01-01

This paper presents the status of analyses on three Rocket Based Combined Cycle configurations underway in the Applied Fluid Dynamics Analysis Group (TD64). TD64 is performing computational fluid dynamics analysis on a Penn State RBCC test rig, the proposed Draco axisymmetric RBCC engine and the Trailblazer engine. The intent of the analysis on the Penn State test rig is to benchmark the Finite Difference Navier Stokes code for ejector mode fluid dynamics. The Draco engine analysis is a trade study to determine the ejector mode performance as a function of three engine design variables. The Trailblazer analysis is to evaluate the nozzle performance in scramjet mode. Results to date of each analysis are presented.

Chandra Discovers X-ray Source at the Center of Our Galaxy

Science.gov (United States)

2000-01-01

converted into the X-ray light that we see," Baganoff said. "This new result provides fresh insight that will no doubt stir heated debates on these issues "Chandra's sensitivity is 20 times better than achieved with the best previous X-ray telescopes," said Gordon Garmire, the Evan Pugh Professor of Astronomy and Astrophysics at Penn State University and head of the team that conceived and built Chandra's Advanced CCD Imaging Spectrometer (ACIS) X-ray camera, which Chandra's mirrors, make Chandra the perfect tool for studying this faint X-ray source in its crowded field." "The luminosity of the X-ray source we have discovered already is a factor of five satelllite," Baganoff said. "This poses a problem for theorists. The galactic center is a crowded place. If we were to find that most or all of the X-ray emission is not from all up." Astronomers believe that most galaxies harbor massive black holes at their centers. Many of these black holes are thought to produce powerful and brilliant point-like sources of light that astronomers call quasars and active galactic nuclei. Why the center of our galaxy is so dim is a long-standing puzzle. One Source Standing Out in a Crowd Sagittarius A*, which stands out on a radio map as a bright dot, was detected at the dynamical center of the Milky Way galaxy by radio telescopes in 1974. More recently, infrared observations of the movements of stars around Sagittarius A* has convinced most astronomers that there is a supermassive black hole at the center of our galaxy and that it is probably associated with Sagittarius A*. A black hole is an object so compact that light itself cannot escape its gravitational pull. A black hole sucks up material thrown out by normal stars around it. Because there are a million times more stars in a given volume in the galactic center than elsewhere in the galaxy, researchers cannot yet say definitively that Sagittarius A* is the newly detected source of the X-rays. "We need more data to clarify our

Impact of Faculty Development Workshops in Student-Centered Teaching Methodologies on Faculty Members' Teaching and Their Students' Perceptions.

Science.gov (United States)

Tricio, Jorge A; Montt, Juan E; Ormeño, Andrea P; Del Real, Alberto J; Naranjo, Claudia A

2017-06-01

The aim of this study was to assess, after one year, the impact of faculty development in teaching and learning skills focused on a learner-centered approach on faculty members' perceptions of and approaches to teaching and on their students' learning experiences and approaches. Before training (2014), all 176 faculty members at a dental school in Chile were invited to complete the Approaches to Teaching Inventory (ATI) to assess their teaching approaches (student- vs. teacher-focused). In 2015, all 496 students were invited to complete the Study Process Questionnaire (R-SPQ-2F) to assess their learning approaches (deep or surface) and the Course Experience Questionnaire (CEQ) to measure their teaching quality perceptions. Subsequently, faculty development workshops on student-centered teaching methodologies were delivered, followed by peer observation. In March 2016, all 176 faculty members and 491 students were invited to complete a second ATI (faculty) and R-SPQ-2 and CEQ (students). Before (2014) and after (2016) the training, 114 (65%) and 116 (66%) faculty members completed the ATI, respectively, and 89 (49%) of the then-181 faculty members completed the perceptions of skills development questionnaire in September 2016. In 2015, 373 students (75%) completed the R-SPQ-2F and CEQ; 412 (83%) completed both questionnaires in 2016. In 2014, the faculty results showed that student-focused teaching was significantly higher in preclinical and clinical courses than in the basic sciences. In 2016, teacher-focused teaching fell significantly; basic science teaching improved the most. Students in both the 2015 and 2016 cohorts had lower mean scores for deep learning approaches from year 1 on, while they increased their scores for surface learning. The students' perceptions of faculty members' good teaching, appropriate assessment, clear goals, and e-learning improved significantly, but perception of appropriate workload did not. Teaching and learning skills development

Use of social media in graduate-level medical humanities education: two pilot studies from Penn State College of Medicine.

Science.gov (United States)

George, Daniel R; Dellasega, Cheryl

2011-01-01

Social media strategies in education have gained attention for undergraduate students, but there has been relatively little application with graduate populations in medicine. To use and evaluate the integration of new social media tools into the curricula of two graduate-level medical humanities electives offered to 4th-year students at Penn State College of Medicine. Instructors selected five social media tools--Twitter, YouTube, Flickr, blogging and Skype--to promote student learning. At the conclusion of each course, students provided quantitative and qualitative course evaluation. Students gave high favourability ratings to both courses, and expressed that the integration of social media into coursework augmented learning and collaboration. Others identified challenges including: demands on time, concerns about privacy and lack of facility with technology. Integrating social media tools into class activities appeared to offer manifold benefits over traditional classroom methods, including real-time communication outside of the classroom, connecting with medical experts, collaborative opportunities and enhanced creativity. Social media can augment learning opportunities within humanities curriculum in medical schools, and help students acquire tools and skill-sets for problem solving, networking, and collaboration. Command of technologies will be increasingly important to the practice of medicine in the twenty-first century.

Integrating Sustainability across the University Curriculum

Science.gov (United States)

Dmochowski, Jane Ellen; Garofalo, Dan; Fisher, Sarah; Greene, Ann; Gambogi, Danielle

2016-01-01

Purpose: Colleges and universities increasingly have the mandate and motivation to integrate sustainability into their curricula. The purpose of this paper is to share the strategy used at the University of Pennsylvania (Penn) and provide an evaluation of its success and guidance to others creating similar programs. Design/methodology/approach:…

Guide for generic application of Reliability Centered Maintenance (RCM) recommendations

International Nuclear Information System (INIS)

Schwan, C.A.; Toomey, G.E.; Morgan, T.A.; Darling, S.S.

1991-02-01

Previously completed reliability centered maintenance (RCM) studies form the basis for developing or refining a preventive maintenance program. This report describes a generic methodology that will help utilities optimize nuclear plant maintenance programs using RCM techniques. This guide addresses the following areas: history of the generic methodology development process, and use of the generic methodology for conducting system-to-system and component-to-component evaluations. 2 refs., 2 figs., 5 tabs

Design of comprehensive Alzheimer's disease centers to address unmet national needs.

Science.gov (United States)

Trojanowski, John Q; Arnold, Steven E; Karlawish, Jason H; Brunden, Kurt; Cary, Mark; Davatzikos, Christos; Detre, John; Gaulton, Glen; Grossman, Murray; Hurtig, Howard; Jedrziewski, Kathryn; McCluskey, Leo; Naylor, Mary; Polsky, Daniel; Schellenberg, Gerard D; Siderowf, Andrew; Shaw, Leslie M; Van Deerlin, Vivianna; Wang, Li-San; Werner, Rachel; Xie, Sharon X; Lee, Virginia M-Y

2010-03-01

The problem of Alzheimer's disease (AD) exemplifies the challenges of dealing with a broad range of aging-related chronic disorders that require long-term, labor-intensive, and expensive care. As the baby boom generation ages and brain diseases become more prevalent, the need to confront the pending health care crisis is more urgent than ever before. Indeed, there is now a critical need to expand significantly the national effort to solve the problem of AD, with special focus on prevention. The Campaign to Prevent Alzheimer's Disease by 2020 (PAD2020) aims to create a new paradigm for planning and supporting the organization of worldwide cooperative research networks to develop new technologies for early detection and treatments of aging-related memory and motor impairments. PAD 2020 is developing an implementation plan to justify (1) increasing the federal budget for research, (2) developing novel national resources to discover new interventions for memory and motor disorders, and (3) creating innovative and streamlined decision-making processes for selecting and supporting new ideas. Since 1978 the National Institute on Aging or National Institute of Health (NIH) established an extensive national network of AD research facilities at academic institutions including AD Centers (ADCs), Consortium to Establish a Registry for AD, AD Cooperative Study (ADCS), AD Drug Discovery Program, National Alzheimer's Coordinating Center, National Cell Repository for AD, and AD Neuroimaging Initiative. However, despite the success of these programs and their critical contributions, they are no longer adequate to meet the challenges presented by AD. PAD 2020 is designed to address these changes by improving the efficiency and effectiveness of these programs. For example, the ADCs (P30s and P50s) can be enhanced by converting some into Comprehensive Alzheimer's Disease Centers (CADCs) to support not only research, but also by being demonstration projects on care/treatment, clinical

Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

Science.gov (United States)

Khalil, Deena; Kier, Meredith

2017-01-01

This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

UPDATE ON DEVELOPMENT OF NUDGING FDDA FOR ADVANCED RESEARCH WRF

Science.gov (United States)

A nudging-based four-dimensional data assimilation (FDDA) system is being developed for the Weather Research and Forecasting (WRF) Model. This effort represents a collaboration between The Pennsylvania State University (i.e., Penn State), the National Center for Atmospheric Rese...

AN INTEGRATED METHODOLOGY FOR CUSTOMER RELATIONSHIP MANAGEMENT CUSTOMIZATION

Directory of Open Access Journals (Sweden)

Ricardo Colomo Palacios

2008-02-01

Full Text Available The importance and presence of technological solutions in organizations supporting CRM are a vital business fact from the late nineties. Presently, the manufacturers figure in the market has dramatically decreased because of continuous takeovers and merges, but it has on the other hand gained momentum because of the sudden open-source and on-demand solutions appearance. In this scope, a unified methodology centered on CRM solutions is of paramount importance since it has traditionally been linked to either system integration or overall solution design. Based on the two de-facto complementary standards for the implementation and development of Information Systems, namely the ESA and Dyché CRM systems implementation methodology, in this paper, we provide a CRM business solutions customization methodology which pertains independently to the integration and tool maker perspective.

Evaluation and assessment methodology, standards, and procedures manual of the United States Federal Radiological Monitoring and Assessment Center

International Nuclear Information System (INIS)

Kerns, K.C.; Burson, Z.G.; Smith, J.M.; Blanchard, R.L.

2000-01-01

In the event of a major radiological emergency, the U.S. Federal Radiological Emergency Response Plan authorises the creation of the Federal Radiological Monitoring and Assessment Center (FRMAC). The FRMAC is established to co-ordinate the Federal off-site monitoring and assessment activities, and is comprised of representatives from several Federal agencies and Department of Energy contractors who provide assistance to the state(s) and Lead Federal Agency. The Evaluation and Assessment (E and A) Division of the FRMAC is responsible for receiving, storing, and interpreting environmental surveillance data to estimate the potential health consequences to the population in the vicinity of the accident site. The E and A Division has commissioned the preparation of a methodology and procedures manual which will result in a consistent approach by Division members in carrying out their duties. The first edition of this manual is nearing completion. In this paper, a brief review of the structure of the FRMAC is presented, with emphasis on the E and A Division. The contents of the E and A manual are briefly described, as are future plans for its expansion. (author)

Validation of the Penn Inventory of Scrupulosity (PIOS) in scrupulous and nonscrupulous patients: Revision of factor structure and psychometrics.

Science.gov (United States)

Huppert, Jonathan D; Fradkin, Isaac

2016-06-01

Scrupulosity, or obsessive-compulsive symptoms related to religiosity or religion, is a common presentation of obsessive compulsive disorder (OCD), and it is important to elucidate its phenomenology and measurement. Today, the most widespread questionnaire for the assessment of scrupulosity is the Penn Inventory of Scrupulosity (PIOS). The current study examines the psychometric properties of the PIOS in outpatient, treatment-seeking patients. Results of a confirmatory factor analysis suggested an unsatisfactory fit for previously suggested factor structures. A follow-up exploratory factor analysis suggested that a bifactor model was the most suitable solution. In addition, the scores of the PIOS and its revised subscales were found to have moderate-good concurrent validity; however, its scores discriminated poorly between patients with scrupulous obsessions and patients with OCD and other repugnant obsessions. Group differences and receiver operating characteristics (ROC) analyses both indicated that the PIOS is more suitable in discriminating scrupulous obsessions in Christian patients but not in other religious groups (i.e., Jews, nonreligious patients). Additional analyses revealed that the co-occurrence of scrupulous and other repugnant obsessions is also moderated by religious affiliation. These results raise questions in terms of grouping scrupulosity with other repugnant obsessions and suggest for the need of culturally sensitive instruments of scrupulosity. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Multistep translation and cultural adaptation of the Penn acoustic neuroma quality-of-life scale for German-speaking patients.

Science.gov (United States)

Kristin, Julia; Glaas, Marcel Fabian; Stenin, Igor; Albrecht, Angelika; Klenzner, Thomas; Schipper, Jörg; Eysel-Gosepath, Katrin

2017-11-01

Monitoring the health-related quality of life (HRQOL) for patients with vestibular schwannoma (VS) has garnered increasing interest. In German-speaking countries, there is no disease-specific questionnaire available similar to the "Penn Acoustic Neuroma Quality-of-life Scale" (PANQOL). We translated the PANQOL for German-speaking patients based on a multistep protocol that included not only a forward-backward translation but also linguistic and sociocultural adaptations. The process consists of translation, synthesis, back translation, review by an expert committee, administration of the prefinal version to our patients, submission and appraisal of all written documents by our research team. The required multidisciplinary team for translation comprised head and neck surgeons, language professionals (German and English), a professional translator, and bilingual participants. A total of 123 patients with VS underwent microsurgical procedures via different approaches at our clinic between January 2007 and January 2017. Among these, 72 patients who underwent the translabyrinthine approach participated in the testing of the German-translated PANQOL. The first German version of the PANQOL questionnaire was created by a multistep translation process. The responses indicate that the questionnaire is simple to administer and applicable to our patients. The use of a multistep process to translate quality-of-life questionnaires is complex and time-consuming. However, this process was performed properly and resulted in a version of the PANQOL for assessing the quality of life of German-speaking patients with VS.

How to Reduce Head CT Orders in Children with Hydrocephalus Using the Lean Six Sigma Methodology: Experience at a Major Quaternary Care Academic Children's Center.

Science.gov (United States)

Tekes, A; Jackson, E M; Ogborn, J; Liang, S; Bledsoe, M; Durand, D J; Jallo, G; Huisman, T A G M

2016-06-01

Lean Six Sigma methodology is increasingly used to drive improvement in patient safety, quality of care, and cost-effectiveness throughout the US health care delivery system. To demonstrate our value as specialists, radiologists can combine lean methodologies along with imaging expertise to optimize imaging elements-of-care pathways. In this article, we describe a Lean Six Sigma project with the goal of reducing the relative use of pediatric head CTs in our population of patients with hydrocephalus by 50% within 6 months. We applied a Lean Six Sigma methodology using a multidisciplinary team at a quaternary care academic children's center. The existing baseline imaging practice for hydrocephalus was outlined in a Kaizen session, and potential interventions were discussed. An improved radiation-free workflow with ultrafast MR imaging was created. Baseline data were collected for 3 months by using the departmental radiology information system. Data collection continued postintervention and during the control phase (each for 3 months). The percentage of neuroimaging per technique (head CT, head ultrasound, ultrafast brain MR imaging, and routine brain MR imaging) was recorded during each phase. The improved workflow resulted in a 75% relative reduction in the percentage of hydrocephalus imaging performed by CT between the pre- and postintervention/control phases (Z-test, P = .0001). Our lean interventions in the pediatric hydrocephalus care pathway resulted in a significant reduction in head CT orders and increased use of ultrafast brain MR imaging. © 2016 by American Journal of Neuroradiology.

Anatomy of a Security Operations Center

Science.gov (United States)

Wang, John

2010-01-01

Many agencies and corporations are either contemplating or in the process of building a cyber Security Operations Center (SOC). Those Agencies that have established SOCs are most likely working on major revisions or enhancements to existing capabilities. As principle developers of the NASA SOC; this Presenters' goals are to provide the GFIRST community with examples of some of the key building blocks of an Agency scale cyber Security Operations Center. This presentation viII include the inputs and outputs, the facilities or shell, as well as the internal components and the processes necessary to maintain the SOC's subsistence - in other words, the anatomy of a SOC. Details to be presented include the SOC architecture and its key components: Tier 1 Call Center, data entry, and incident triage; Tier 2 monitoring, incident handling and tracking; Tier 3 computer forensics, malware analysis, and reverse engineering; Incident Management System; Threat Management System; SOC Portal; Log Aggregation and Security Incident Management (SIM) systems; flow monitoring; IDS; etc. Specific processes and methodologies discussed include Incident States and associated Work Elements; the Incident Management Workflow Process; Cyber Threat Risk Assessment methodology; and Incident Taxonomy. The Evolution of the Cyber Security Operations Center viII be discussed; starting from reactive, to proactive, and finally to proactive. Finally, the resources necessary to establish an Agency scale SOC as well as the lessons learned in the process of standing up a SOC viII be presented.

Utilizing Lean Six Sigma Methodology to Improve the Authored Works Command Approval Process at Naval Medical Center San Diego.

Science.gov (United States)

Valdez, Michelle M; Liwanag, Maureen; Mount, Charles; Rodriguez, Rechell; Avalos-Reyes, Elisea; Smith, Andrew; Collette, David; Starsiak, Michael; Green, Richard

2018-03-14

Inefficiencies in the command approval process for publications and/or presentations negatively impact DoD Graduate Medical Education (GME) residency programs' ability to meet ACGME scholarly activity requirements. A preliminary review of the authored works approval process at Naval Medical Center San Diego (NMCSD) disclosed significant inefficiency, variation in process, and a low level of customer satisfaction. In order to facilitate and encourage scholarly activity at NMCSD, and meet ACGME requirements, the Executive Steering Council (ESC) chartered an interprofessional team to lead a Lean Six Sigma (LSS) Rapid Improvement Event (RIE) project. Two major outcome metrics were identified: (1) the number of authored works submissions containing all required signatures and (2) customer satisfaction with the authored works process. Primary metric baseline data were gathered utilizing a Clinical Investigations database tracking publications and presentations. Secondary metric baseline data were collected via a customer satisfaction survey to GME faculty and residents. The project team analyzed pre-survey data and utilized LSS tools and methodology including a "gemba" (environment) walk, cause and effect diagram, critical to quality tree, voice of the customer, "muda" (waste) chart, and a pre- and post-event value stream map. The team selected an electronic submission system as the intervention most likely to positively impact the RIE project outcome measures. The number of authored works compliant with all required signatures improved from 52% to 100%. Customer satisfaction rated as "completely or mostly satisfied" improved from 24% to 97%. For both outcomes, signature compliance and customer satisfaction, statistical significance was achieved with a p methodology and tools to improve signature compliance and increase customer satisfaction with the authored works approval process, leading to 100% signature compliance, a comprehensive longitudinal repository of all

Marshak Lectureship: Vibrational properties of isolated color centers in diamond

Science.gov (United States)

Alkauskas, Audrius

In this talk we review our recent work on first-principles calculations of vibrational properties of isolated defect spin qubits and single photon emitters in diamond. These properties include local vibrational spectra, luminescence lineshapes, and electron-phonon coupling. They are key in understanding physical mechanisms behind spin-selective optical initialization and read-out, quantum efficiency of single-photon emitters, as well as in the experimental identification of as yet unknown centers. We first present the methodology to calculate and analyze vibrational properties of effectively isolated defect centers. We then apply the methodology to the nitrogen-vacancy and the silicon-vacancy centers in diamond. First-principles calculations yield important new insights about these important defects. Work performed in collaboration with M. W. Doherty, A. Gali, E. Londero, L. Razinkovas, and C. G. Van de Walle. Supported by the Research Council of Lithuania (Grant M-ERA.NET-1/2015).

Development and application of a decision methodology for the planning of nuclear research and development in Saudi Arabia

International Nuclear Information System (INIS)

Abulfaraj, W.H.

1983-01-01

The thesis adapts two formal decision methodologies for the planning and development of a Nuclear Research Center for the Kingdom of Saudi Arabia. The methodologies are useful for the selection of alternative nuclear energy strategies. Multiattribute utility theory (MUT) and fuzzy set theory (FST) are selected to accommodate for decision makers' preferences and quick decision. MUT is employed to evaluate four appropriate research center facilities to determine the optimal choice therefrom in order to meet the needs of the proposed center. FST is used to handle site selection decision for the center. Procurement and siting decisions in Saudi Arabia for equipment are based on the demonstrated performance of operating units. Certain procedures discussed in detail in the dissertation reflect this modus operandi. 106 refs

Dissecting delays in trauma care using corporate lean six sigma methodology.

Science.gov (United States)

Parks, Jennifer K; Klein, Jorie; Frankel, Heidi L; Friese, Randall S; Shafi, Shahid

2008-11-01

The Institute of Medicine has identified trauma center overcrowding as a crisis. We applied corporate Lean Six Sigma methodology to reduce overcrowding by quantifying patient dwell times in trauma resuscitation units (TRU) and to identify opportunities for reducing them. TRU dwell time of all patients treated at a Level I trauma center were measured prospectively during a 3-month period (n = 1,184). Delays were defined as TRU dwell time >6 hours. Using personnel trained in corporate Lean Six Sigma methodology, we created a detailed process map of patient flow through our TRU and measured time spent at each step prospectively during a 24/7 week-long time study (n = 43). Patients with TRU dwell time below the median (3 hours) were compared with those with longer dwell times to identify opportunities for improvement. TRU delays occurred in 183 of 1,184 trauma patients (15%), and peaked on days with >15 patients or with presence of five simultaneous patients. However, 135 delays (74%) occurred on days when Six Sigma mapping identified four processes that were related to TRU delays. Reduction of TRU dwell time by 1 hour per patient using interventions targeting these specific processes has the potential to improve our TRU capacity to care for more patients. Application of corporate Lean Six Sigma methodology identified opportunities for reducing dwell times in our TRU. Such endeavors are vital to maximize operational efficiency and decrease overcrowding in busy trauma centers working at capacity.

Impact of Writing Proficiency and Writing Center Participation on Academic Performance

Science.gov (United States)

Bielinska-Kwapisz, Agnieszka

2015-01-01

Purpose: Given that there exists in the literature relatively little research into the effectiveness of writing centers at universities, the purpose of this paper is to show the impact of university writing centers on first-year business seminar student writing. Design/methodology/approach: This quantitative study involved 315 first-year…

Academic Medical Centers as digital health catalysts.

Science.gov (United States)

DePasse, Jacqueline W; Chen, Connie E; Sawyer, Aenor; Jethwani, Kamal; Sim, Ida

2014-09-01

Emerging digital technologies offer enormous potential to improve quality, reduce cost, and increase patient-centeredness in healthcare. Academic Medical Centers (AMCs) play a key role in advancing medical care through cutting-edge medical research, yet traditional models for invention, validation and commercialization at AMCs have been designed around biomedical initiatives, and are less well suited for new digital health technologies. Recently, two large bi-coastal Academic Medical Centers, the University of California, San Francisco (UCSF) through the Center for Digital Health Innovation (CDHI) and Partners Healthcare through the Center for Connected Health (CCH) have launched centers focused on digital health innovation. These centers show great promise but are also subject to significant financial, organizational, and visionary challenges. We explore these AMC initiatives, which share the following characteristics: a focus on academic research methodology; integration of digital technology in educational programming; evolving models to support "clinician innovators"; strategic academic-industry collaboration and emergence of novel revenue models. Copyright © 2014 Elsevier Inc. All rights reserved.

Performance improvement using methodology: case study.

Science.gov (United States)

Harmelink, Stacy

2008-01-01

The department of radiology at St. Luke's Regional Medical Center in Sioux City, IA implemented meaningful workflow changes for reducing patient wait times and, at the same time, improved customer and employee satisfaction scores. Lean methodology and the 7 Deadly Wastes, along with small group interaction, was used to evaluate and change the process of a patient waiting for an exam in the radiology department. The most important key to the success of a performance improvement project is the involvement of staff.

Examining Feasibility of Mentoring Families at a Farmers' Market and Community Garden

Science.gov (United States)

George, Daniel R.; Manglani, Monica; Minnehan, Kaitlin; Chacon, Alexander; Gundersen, Alexandra; Dellasega, Cheryl; Kraschnewski, Jennifer L.

2016-01-01

Background: Fruit and vegetable prescription (FVRx) programs provide "prescriptions" for produce, but increased access to nutritional food may be insufficient for long-term behavior change. Purpose: We integrated nutritional education into an FVRx program at a farmers' market and community garden at Penn State Medical Center by pairing…

"Friending Facebook?" A Minicourse on the Use of Social Media by Health Professionals

Science.gov (United States)

George, Daniel R.

2011-01-01

Introduction: Health professionals are working in an era of social technologies that empower users to generate content in real time. This article describes a 3-part continuing education minicourse called "Friending Facebook?" undertaken at Penn State Hershey Medical Center that aimed to model the functionality of current technologies in…

[What is the methodological quality of articles on therapeutic procedures published in Cirugía Española?].

Science.gov (United States)

Manterola, Carlos; Busquets, Juli; Pascual, Marta; Grande, Luis

2006-02-01

The aim of this study was to determine the methodological quality of articles on therapeutic procedures published in Cirugía Española and to study its association with the publication year, center, and subject-matter. A bibliometric study that included all articles on therapeutic procedures published in Cirugía Española between 2001 and 2004 was performed. All kinds of clinical designs were considered, excluding editorials, review articles, letters to editor, and experimental studies. The variables analyzed were: year of publication, center, design, and methodological quality. Methodological quality was determined by a valid and reliable scale. Descriptive statistics (calculation of means, standard deviation and medians) and analytical statistics (Pearson's chi2, nonparametric, ANOVA and Bonferroni tests) were used. A total of 244 articles were studied (197 case series [81%], 28 cohort studies [12%], 17 clinical trials [7%], 1 cross sectional study and 1 case-control study [0.8%]). The studies were performed mainly in Catalonia and Murcia (22% and 16%, respectively). The most frequent subject areas were soft tissue and hepatobiliopancreatic surgery (23% and 19%, respectively). The mean and median of the methodological quality score calculated for the entire series was 10.2 +/- 3.9 points and 9.5 points, respectively. Methodological quality significantly increased by publication year (p < 0.001). An association between methodological quality and subject area was observed but no association was detected with the center performing the study. The methodological quality of articles on therapeutic procedures published in Cirugía Española between 2001 and 2004 is low. However, a statistically significant trend toward improvement was observed.

Energy efficient thermal management of data centers

CERN Document Server

Kumar, Pramod

2012-01-01

Energy Efficient Thermal Management of Data Centers examines energy flow in today's data centers. Particular focus is given to the state-of-the-art thermal management and thermal design approaches now being implemented across the multiple length scales involved. The impact of future trends in information technology hardware, and emerging software paradigms such as cloud computing and virtualization, on thermal management are also addressed. The book explores computational and experimental characterization approaches for determining temperature and air flow patterns within data centers. Thermodynamic analyses using the second law to improve energy efficiency are introduced and used in proposing improvements in cooling methodologies. Reduced-order modeling and robust multi-objective design of next generation data centers are discussed. This book also: Provides in-depth treatment of energy efficiency ideas based on  fundamental heat transfer, fluid mechanics, thermodynamics, controls, and computer science Focus...

Carbohydrate metabolism teaching strategy for the Pharmacy course, applying active teaching methodology

Directory of Open Access Journals (Sweden)

Uderlei Donizete Silveira Covizzi

2012-12-01

Full Text Available The traditional teaching method has been widely questioned on the development of skills and abilities in training healthcare professionals. In the traditional methodology the main transmitter of knowledge is the teacher while students assume passive spectator role. Some Brazilian institutions broke with this model, structuring the curriculum to student-centered learning. Some medical schools have adopted the Problem Based Learning (PBL, a methodology that presents problem questions, to be encountered by future physicians, for resolution in small tutorial groups. Our work proposes to apply an active teaching-learning methodology addressing carbohydrate metabolism during the discipline of biochemistry for under graduation students from pharmacy course. Thus, the academic content was presented through brief and objective talks. Later, learners were split into tutorial groups for the resolution of issues in context. During the activities, the teacher drove the discussion to the issues elucidation. At the end of the module learners evaluated the teaching methodology by means of an applied questionnaire and the developed content was evaluated by an usual individual test. The questionnaire analysis indicates that students believe they have actively participated in the teaching-learning process, being encouraged to discuss and understand the theme. The answers highlight closer ties between students and tutor. According to the professor, there is a greater student engagement with learning. It is concluded that an innovative methodology, where the primary responsibility for learning is centered in the student himself, besides to increase the interest in learning, facilitates learning by cases discussion in groups. The issues contextualization establishes a narrowing between theory and practice.

Economic evaluation studies in reproductive medicine: a systematic review of methodologic quality

NARCIS (Netherlands)

Moolenaar, Lobke M.; Vijgen, Sylvia M. C.; Hompes, Peter; van der Veen, Fulco; Mol, Ben Willem J.; Opmeer, Brent C.

2013-01-01

To evaluate the methodologic quality of economic analyses published in the field of reproductive medicine. Systematic review. Centers for reproductive care. Infertility patients. We performed a Medline search to identify economic evaluation studies in reproductive medicine. We included studies that

Methodological triangulation in work life research

DEFF Research Database (Denmark)

Warring, Niels

Based on examples from two research projects on preschool teachers' work, the paper will discuss potentials and challenges in methodological triangulation in work life research. Analysis of ethnographic and phenomenological inspired observations of everyday life in day care centers formed the basis...... for individual interviews and informal talks with employees. The interviews and conversations were based on a critical hermeneutic approach. The analysis of observations and interviews constituted a knowledge base as the project went in to the last phase: action research workshops. In the workshops findings from...

Lean Six Sigma in health care and the challenge of implementation of Six Sigma methodologies at a Veterans Affairs Medical Center.

Science.gov (United States)

Pocha, Christine

2010-01-01

Six Sigma and Lean Thinking are quality initiatives initially deployed in industry to improve operational efficiency leading to better quality and subsequent cost savings. The financial rationale for embarking on this quality journey is clear; applying it to today's health care remains challenging. The cost of medical care is increasing at an alarming rate; most of these cost increases are attributed to an aging population and technological advances; therefore, largely beyond control. Furthermore, health care cost increases are caused by unnecessary operational inefficiency associated with the direct medical service delivery process. This article describes the challenging journey of implementing Six Sigma methodology at a tertiary care medical center. Many lessons were learned; however, of utmost importance were team approach, "buy in" of the stakeholders, and the willingness of team members to change daily practice and to adapt new and innovative ways how health care can be delivered. Six Sigma incorporated as part of the "company's or hospital's culture" would be most desirable but the learning curve will be steep.

A methodology for a minimum data set for rare diseases to support national centers of excellence for healthcare and research

Science.gov (United States)

Choquet, Rémy; Maaroufi, Meriem; de Carrara, Albane; Messiaen, Claude; Luigi, Emmanuel; Landais, Paul

2015-01-01

Background Although rare disease patients make up approximately 6–8% of all patients in Europe, it is often difficult to find the necessary expertise for diagnosis and care and the patient numbers needed for rare disease research. The second French National Plan for Rare Diseases highlighted the necessity for better care coordination and epidemiology for rare diseases. A clinical data standard for normalization and exchange of rare disease patient data was proposed. The original methodology used to build the French national minimum data set (F-MDS-RD) common to the 131 expert rare disease centers is presented. Methods To encourage consensus at a national level for homogeneous data collection at the point of care for rare disease patients, we first identified four national expert groups. We reviewed the scientific literature for rare disease common data elements (CDEs) in order to build the first version of the F-MDS-RD. The French rare disease expert centers validated the data elements (DEs). The resulting F-MDS-RD was reviewed and approved by the National Plan Strategic Committee. It was then represented in an HL7 electronic format to maximize interoperability with electronic health records. Results The F-MDS-RD is composed of 58 DEs in six categories: patient, family history, encounter, condition, medication, and questionnaire. It is HL7 compatible and can use various ontologies for diagnosis or sign encoding. The F-MDS-RD was aligned with other CDE initiatives for rare diseases, thus facilitating potential interconnections between rare disease registries. Conclusions The French F-MDS-RD was defined through national consensus. It can foster better care coordination and facilitate determining rare disease patients’ eligibility for research studies, trials, or cohorts. Since other countries will need to develop their own standards for rare disease data collection, they might benefit from the methods presented here. PMID:25038198

Methodology for plastic fracture - a progress report

International Nuclear Information System (INIS)

Wilkinson, J.P.D.; Smith, R.E.E.

1977-01-01

This paper describes the progress of a study to develop a methodology for plastic fracture. Such a fracture mechanics methodology, having application in the plastic region, is required to assess the margin of safety inherent in nuclear reactor pressure vessels. The initiation and growth of flaws in pressure vessels under overload conditions is distinguished by a number of unique features, such as large scale yielding, three-dimensional structural and flaw configurations, and failure instabilities that may be controlled by either toughness or plastic flow. In order to develop a broadly applicable methodology of plastic fracture, these features require the following analytical and experimental studies: development of criteria for crack initiation and growth under large scale yielding; the use of the finite element method to describe elastic-plastic behaviour of both the structure and the crack tip region; and extensive experimental studies on laboratory scale and large scale specimens, which attempt to reproduce the pertinent plastic flow and crack growth phenomena. This discussion centers on progress to date on the selection, through analysis and laboratory experiments, of viable criteria for crack initiation and growth during plastic fracture. (Auth.)

Work-Centered Design and Evaluation of a C2 Visualization Aid

National Research Council Canada - National Science Library

Roth, Emilie; Scott, Ronald; Kazmierczak, Tom; Whitaker, Randall; Stilson, Mona; Thomas-Meyers, Gina; Wampler, Jeffrey

2006-01-01

.... We have been developing and applying work-centered design and evaluation methodologies to design advanced visualization and support tools intended to more effectively support C2 cognitive and collaborative work...

A Design Methodology for Medical Processes

Science.gov (United States)

Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Summary Background Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient’s needs, the uncertainty of the patient’s response, and the indeterminacy of patient’s compliance to treatment. Also, the multiple actors involved in patient’s care need clear and transparent communication to ensure care coordination. Objectives In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. Methods The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. Results The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Conclusions Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution. PMID:27081415

A Design Methodology for Medical Processes.

Science.gov (United States)

Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

Developing knowledge management systems with an active expert methodology

International Nuclear Information System (INIS)

Sandahl, K.

1992-01-01

Knowledge management, understood as the ability to store, distribute and utilize human knowledge in an organization, is the subject of this dissertation. In particular we have studied the design of methods and supporting software for this process. Detailed and systematic description of the design and development processes of three case-study implementations of knowledge management software are provided. The outcome of the projects is explained in terms of an active expert development methodology, which is centered around support for a domain expert to take substantial responsibility for the design and maintenance of a knowledge management system in a given area of application. Based on the experiences from the case studies and the resulting methodology, an environment for automatically supporting knowledge management was designed in the KNOWLEDGE-LINKER research project. The vital part of this architecture is a knowledge acquisition tool, used directly by the experts in creating and maintaining a knowledge base. An elaborated version of the active expert development methodology was then formulated as the result of applying the KNOWLEDGE-LINKER approach in a fourth case study. This version of the methodology is also accounted for and evaluated together within the supporting KNOWLEDGE-LINKER architecture. (au)

A methodology for constraining power in finite element modeling of radiofrequency ablation.

Science.gov (United States)

Jiang, Yansheng; Possebon, Ricardo; Mulier, Stefaan; Wang, Chong; Chen, Feng; Feng, Yuanbo; Xia, Qian; Liu, Yewei; Yin, Ting; Oyen, Raymond; Ni, Yicheng

2017-07-01

Radiofrequency ablation (RFA) is a minimally invasive thermal therapy for the treatment of cancer, hyperopia, and cardiac tachyarrhythmia. In RFA, the power delivered to the tissue is a key parameter. The objective of this study was to establish a methodology for the finite element modeling of RFA with constant power. Because of changes in the electric conductivity of tissue with temperature, a nonconventional boundary value problem arises in the mathematic modeling of RFA: neither the voltage (Dirichlet condition) nor the current (Neumann condition), but the power, that is, the product of voltage and current was prescribed on part of boundary. We solved the problem using Lagrange multiplier: the product of the voltage and current on the electrode surface is constrained to be equal to the Joule heating. We theoretically proved the equality between the product of the voltage and current on the surface of the electrode and the Joule heating in the domain. We also proved the well-posedness of the problem of solving the Laplace equation for the electric potential under a constant power constraint prescribed on the electrode surface. The Pennes bioheat transfer equation and the Laplace equation for electric potential augmented with the constraint of constant power were solved simultaneously using the Newton-Raphson algorithm. Three problems for validation were solved. Numerical results were compared either with an analytical solution deduced in this study or with results obtained by ANSYS or experiments. This work provides the finite element modeling of constant power RFA with a firm mathematical basis and opens pathway for achieving the optimal RFA power. Copyright © 2016 John Wiley & Sons, Ltd.

Outsourcing of Defense Supply Center, Columbus, Bus and Taxi Service Operations

National Research Council Canada - National Science Library

Granetto, Paul

1999-01-01

Introduction. We performed the audit in response to allegations to the Defense Hotline that the Defense Supply Center, Columbus, outsourcing study for bus and taxi service operations was based on incorrect methodology...

Student-Centered Designs of Pan-African Literature Courses

Science.gov (United States)

M'Baye, Babacar

2010-01-01

A student-centered teaching methodology is an essential ingredient of a successful Pan-African literary course. In this article, the author defines Pan-Africanism and how to go about designing a Pan-African literature course. The author combines reading assignments with journals, film presentations, and lectures in a productive learning…

Center for risk research: A review of work 1988-1991

International Nuclear Information System (INIS)

Sjoeberg, L.

1992-01-01

This report gives a summary of the research published during the first 4 years of the Center for Risk Research at the Stockholm School of Economics. Risk research carried out so far at the Center has been concerned with mapping of attitudes and risk perceptions with regard to nuclear risks, AIDS, military flight risks, and economic risks. There has also been some methodological work and some work on the relationship between risk perception and interests

Center for risk research: A review of work 1988-1991

Energy Technology Data Exchange (ETDEWEB)

Sjoeberg, L

1992-01-01

This report gives a summary of the research published during the first 4 years of the Center for Risk Research at the Stockholm School of Economics. Risk research carried out so far at the Center has been concerned with mapping of attitudes and risk perceptions with regard to nuclear risks, AIDS, military flight risks, and economic risks. There has also been some methodological work and some work on the relationship between risk perception and interests.

User-Centered Evaluation of Visual Analytics

Energy Technology Data Exchange (ETDEWEB)

Scholtz, Jean C.

2017-10-01

Visual analytics systems are becoming very popular. More domains now use interactive visualizations to analyze the ever-increasing amount and heterogeneity of data. More novel visualizations are being developed for more tasks and users. We need to ensure that these systems can be evaluated to determine that they are both useful and usable. A user-centered evaluation for visual analytics needs to be developed for these systems. While many of the typical human-computer interaction (HCI) evaluation methodologies can be applied as is, others will need modification. Additionally, new functionality in visual analytics systems needs new evaluation methodologies. There is a difference between usability evaluations and user-centered evaluations. Usability looks at the efficiency, effectiveness, and user satisfaction of users carrying out tasks with software applications. User-centered evaluation looks more specifically at the utility provided to the users by the software. This is reflected in the evaluations done and in the metrics used. In the visual analytics domain this is very challenging as users are most likely experts in a particular domain, the tasks they do are often not well defined, the software they use needs to support large amounts of different kinds of data, and often the tasks last for months. These difficulties are discussed more in the section on User-centered Evaluation. Our goal is to provide a discussion of user-centered evaluation practices for visual analytics, including existing practices that can be carried out and new methodologies and metrics that need to be developed and agreed upon by the visual analytics community. The material provided here should be of use for both researchers and practitioners in the field of visual analytics. Researchers and practitioners in HCI and interested in visual analytics will find this information useful as well as a discussion on changes that need to be made to current HCI practices to make them more suitable to

Probabilistic risk assessment methodology for risk management and regulatory applications

International Nuclear Information System (INIS)

See Meng Wong; Kelly, D.L.; Riley, J.E.

1997-01-01

This paper discusses the development and potential applications of PRA methodology for risk management and regulatory applications in the U.S. nuclear industry. The new PRA methodology centers on the development of This paper discusses the time-dependent configuration risk profile for evaluating the effectiveness of operational risk management programs at U.S. nuclear power plants. Configuration-risk profiles have been used as risk-information tools for (1) a better understanding of the impact of daily operational activities on plant safety, and (2) proactive planning of operational activities to manage risk. Trial applications of the methodology were undertaken to demonstrate that configuration-risk profiles can be developed routinely, and can be useful for various industry and regulatory applications. Lessons learned include a better understanding of the issues and characteristics of PRA models available to industry, and identifying the attributes and pitfalls in the developement of risk profiles

What Are the Costs of Trauma Center Readiness? Defining and Standardizing Readiness Costs for Trauma Centers Statewide.

Science.gov (United States)

Ashley, Dennis W; Mullins, Robert F; Dente, Christopher J; Garlow, Laura; Medeiros, Regina S; Atkins, Elizabeth V; Solomon, Gina; Abston, Dena; Ferdinand, Colville H

2017-09-01

Trauma center readiness costs are incurred to maintain essential infrastructure and capacity to provide emergent services on a 24/7 basis. These costs are not captured by traditional hospital cost accounting, and no national consensus exists on appropriate definitions for each cost. Therefore, in 2010, stakeholders from all Level I and II trauma centers developed a survey tool standardizing and defining trauma center readiness costs. The survey tool underwent minor revisions to provide further clarity, and the survey was repeated in 2013. The purpose of this study was to provide a follow-up analysis of readiness costs for Georgia's Level I and Level II trauma centers. Using the American College of Surgeons Resources for Optimal Care of the Injured Patient guidelines, four readiness cost categories were identified: Administrative, Clinical Medical Staff, Operating Room, and Education/Outreach. Through conference calls, webinars and face-to-face meetings with financial officers, trauma medical directors, and program managers from all trauma centers, standardized definitions for reporting readiness costs within each category were developed. This resulted in a survey tool for centers to report their individual readiness costs for one year. The total readiness cost for all Level I trauma centers was $34,105,318 (avg $6,821,064) and all Level II trauma centers was $20,998,019 (avg $2,333,113). Methodology to standardize and define readiness costs for all trauma centers within the state was developed. Average costs for Level I and Level II trauma centers were identified. This model may be used to help other states define and standardize their trauma readiness costs.

The Opinions of Teachers Working at Special Education Centers on Inclusive/Integration Education

Science.gov (United States)

Dogan, Ahmet; Bengisoy, Ayse

2017-01-01

This study was conducted with the purpose of finding out the opinions of teachers working at special education centers about inclusive education. The study was conducted with teachers working at a special education center in Famagusta, Turkish Republic of Northern Cyprus, in the academic year of 2016-2017. Qualitative methodology was used in the…

Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

Science.gov (United States)

O'Neil, Dara

2002-01-01

Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

Activity-Centered Domain Characterization for Problem-Driven Scientific Visualization.

Science.gov (United States)

Marai, G Elisabeta

2018-01-01

Although visualization design models exist in the literature in the form of higher-level methodological frameworks, these models do not present a clear methodological prescription for the domain characterization step. This work presents a framework and end-to-end model for requirements engineering in problem-driven visualization application design. The framework and model are based on the activity-centered design paradigm, which is an enhancement of human-centered design. The proposed activity-centered approach focuses on user tasks and activities, and allows an explicit link between the requirements engineering process with the abstraction stage-and its evaluation-of existing, higher-level visualization design models. In a departure from existing visualization design models, the resulting model: assigns value to a visualization based on user activities; ranks user tasks before the user data; partitions requirements in activity-related capabilities and nonfunctional characteristics and constraints; and explicitly incorporates the user workflows into the requirements process. A further merit of this model is its explicit integration of functional specifications, a concept this work adapts from the software engineering literature, into the visualization design nested model. A quantitative evaluation using two sets of interdisciplinary projects supports the merits of the activity-centered model. The result is a practical roadmap to the domain characterization step of visualization design for problem-driven data visualization. Following this domain characterization model can help remove a number of pitfalls that have been identified multiple times in the visualization design literature.

Event Sequence Analysis of the Air Intelligence Agency Information Operations Center Flight Operations

National Research Council Canada - National Science Library

Larsen, Glen

1998-01-01

This report applies Event Sequence Analysis, methodology adapted from aircraft mishap investigation, to an investigation of the performance of the Air Intelligence Agency's Information Operations Center (IOC...

The users centered design of a new digital fluorometer

International Nuclear Information System (INIS)

Farias, Marcos S.; Santos, Isaac J.A.L. dos; Grecco, Claudio H.S.; Pedrosa, Paulo S.; Colthurst, Carlos M.; Szabo, Andre P.

2009-01-01

The fluorometer is the equipment used in chemical analysis laboratories, research institutes and nuclear fuel cycle companies. This equipment measures an unknown amount of uranium in ores, rivers, etc. The fluorometer functioning is based on the uranium fluorescence when submitted to the ultraviolet radiation incidence. The fluorescence is measured by an electronic optic system with optics filters, photomultiplier tube, and a current amplifier. The user centered design involves the user in the product development in all phases of the design process. Users are not simply consulted at the beginning of the design process and evaluated the system at the end; they are treated as partners throughout the design process. The user centered design emphasizes the needs and abilities of the users and improves the usability of the equipment. The activity centered design emphasizes the development of the equipment with a deep understanding of the users activities and of the current work practices of the users. The aim of this paper is to present a methodological framework that contributes to the design and evaluation of a new digital fluorometer towards an approach related to the users and their activities. This methodological framework includes users-based testing, interviews, questionnaires, human factors standards and guidelines, the users activity analysis and users satisfaction questionnaire. (author)

User-centered Technologies For Blind Children

OpenAIRE

Jaime Sánchez

2008-01-01

The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathe...

An Integrated Modeling Approach to Evaluate and Optimize Data Center Sustainability, Dependability and Cost

Directory of Open Access Journals (Sweden)

Gustavo Callou

2014-01-01

Full Text Available Data centers have evolved dramatically in recent years, due to the advent of social networking services, e-commerce and cloud computing. The conflicting requirements are the high availability levels demanded against the low sustainability impact and cost values. The approaches that evaluate and optimize these requirements are essential to support designers of data center architectures. Our work aims to propose an integrated approach to estimate and optimize these issues with the support of the developed environment, Mercury. Mercury is a tool for dependability, performance and energy flow evaluation. The tool supports reliability block diagrams (RBD, stochastic Petri nets (SPNs, continuous-time Markov chains (CTMC and energy flow (EFM models. The EFM verifies the energy flow on data center architectures, taking into account the energy efficiency and power capacity that each device can provide (assuming power systems or extract (considering cooling components. The EFM also estimates the sustainability impact and cost issues of data center architectures. Additionally, a methodology is also considered to support the modeling, evaluation and optimization processes. Two case studies are presented to illustrate the adopted methodology on data center power systems.

The incorporation of User Centered Design and Industrial design

DEFF Research Database (Denmark)

Dai, Zheng; Ómarsson, Ólafur

2011-01-01

Abstract—Traditional Industrial Design (TID) has been an important aspect in the NPD process within the last decades. User centered design (UCD) is a growing research field for product innovation, starting from the end of 20th century. An NPD process needs support from both design knowledge...... and research methodologies. Both TID and UCD focus on user’s perspective when doing multi-disciplinary work together. They provide skills and methods for designing the style and usability, and balancing the users need and reality. The skills from TID help design expression and realization to communicate...... respectively. Their methodologies are essential for a designer to successfully come to a fruitful design solution, and at the same time the project improves the methodologies of TID and UCD through a reflection process....

Person-centered approaches in medicine: clinical tasks, psychological paradigms, and postnonclassic perspective

Directory of Open Access Journals (Sweden)

Mezzich J.E.

2013-01-01

Full Text Available The article aims to demonstrate advances in methodological means suggested by Vygotsky’s cultural-historical concept in association with a theoretical model of a Person-centered diagnosis and practical use of the construct for clinical psychology and medicine. This, to a greater extent, arises from the fact that the cultural-historical concept (due to its humanistic nature and epistemological content is closely related to the person-centered integrative approach. But for all that the concept corresponds to the ideals of postnonclassical model of scientific rationality with a number of ‘key’ features. Above all it manifests its “methodological maturity” to cope with open self-developing systems, which is most essential at the modern stage of scientific knowledge.The work gives consideration to ‘defining pillars’ of Person-centered approach in modern medicine, to humanistic traditions of the Russian clinical school, and high prospects in diagnostics of such mental constructs as “subjective pattern of disease” and “social situation of personal development in disease” - within the context of person-centered integrative diagnosis.This article discusses the need for implementation a cross-cultural study of subjective pattern of disease and its correlation with a particular “social situation of personality development under disease conditions”. It aims at development and substantiation of the model of person-centered integrative approach, enhancement of its diagnostic scope and, consequently, improvement of the model of person-centered care in modern psychiatry and medicine.

Delivering spacecraft control centers with embedded knowledge-based systems: The methodology issue

Science.gov (United States)

Ayache, S.; Haziza, M.; Cayrac, D.

1994-01-01

Matra Marconi Space (MMS) occupies a leading place in Europe in the domain of satellite and space data processing systems. The maturity of the knowledge-based systems (KBS) technology, the theoretical and practical experience acquired in the development of prototype, pre-operational and operational applications, make it possible today to consider the wide operational deployment of KBS's in space applications. In this perspective, MMS has to prepare the introduction of the new methods and support tools that will form the basis of the development of such systems. This paper introduces elements of the MMS methodology initiatives in the domain and the main rationale that motivated the approach. These initiatives develop along two main axes: knowledge engineering methods and tools, and a hybrid method approach for coexisting knowledge-based and conventional developments.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-06-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-02-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Reaction-Based Reactive Transport Modeling of Iron Reduction and Uranium Immobilization at Area 2 of the NABIR Field Research Center, Subproject to Co-PI Eric E. Roden. Final Report

International Nuclear Information System (INIS)

Roden, Eric E.

2011-01-01

This report summarizes research conducted in conjunction with a project entitled 'Reaction-Based Reactive Transport Modeling of Iron Reduction and Uranium Immobilization at Area 2 of the NABIR Field Research Center', which was funded through the Integrative Studies Element of the former NABIR Program (now the Environmental Remediation Sciences Program) within the Office of Biological and Environmental Research. Dr. William Burgos (The Pennsylvania State University) was the overall PI/PD for the project, which included Brian Dempsey (Penn State), Gour-Tsyh (George) Yeh (Central Florida University), and Eric Roden (formerly at The University of Alabama, now at the University of Wisconsin) as separately-funded co-PIs. The project focused on development of a mechanistic understanding and quantitative models of coupled Fe(III)/U(VI) reduction in FRC Area 2 sediments. The work builds on our previous studies of microbial Fe(III) and U(VI) reduction, and was directly aligned with the Scheibe et al. ORNL FRC Field Project at Area 2.

78 FR 29144 - Center for Scientific Review; Notice of Closed Meetings

Science.gov (United States)

2013-05-17

... Committee: Healthcare Delivery and Methodologies Integrated Review Group Biostatistical Methods and Research... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Center for Scientific Review..., 4300 Military Road NW., Washington, DC 20015. Contact Person: Katherine M Malinda, Ph.D., Scientific...

A low-power photovoltaic system with energy storage for radio communications: Description and design methodology

Science.gov (United States)

Chapman, C. P.; Chapman, P. D.; Lewison, A. H.

1982-01-01

A low power photovoltaic system was constructed with approximately 500 amp hours of battery energy storage to provide power to an emergency amateur radio communications center. The system can power the communications center for about 72 hours of continuous nonsun operation. Complete construction details and a design methodology algorithm are given with abundant engineering data and adequate theory to allow similar systems to be constructed, scaled up or down, with minimum design effort.

Training center leadership strategies for the future

International Nuclear Information System (INIS)

1996-01-01

In the next five years there will be significant changes in the nuclear power industry. Nuclear training centers will be affected since they are such an important part of most nuclear power plants. This paper will propose a methodology for determining a course of action for writing a strategic plan, will identify some trends which may affect your future and will offer a selection of possible actions for the readers' consideration

Congenital Heart Surgery Case Mix Across North American Centers and Impact on Performance Assessment.

Science.gov (United States)

Pasquali, Sara K; Wallace, Amelia S; Gaynor, J William; Jacobs, Marshall L; O'Brien, Sean M; Hill, Kevin D; Gaies, Michael G; Romano, Jennifer C; Shahian, David M; Mayer, John E; Jacobs, Jeffrey P

2016-11-01

Performance assessment in congenital heart surgery is challenging due to the wide heterogeneity of disease. We describe current case mix across centers, evaluate methodology inclusive of all cardiac operations versus the more homogeneous subset of Society of Thoracic Surgeons benchmark operations, and describe implications regarding performance assessment. Centers (n = 119) participating in the Society of Thoracic Surgeons Congenital Heart Surgery Database (2010 through 2014) were included. Index operation type and frequency across centers were described. Center performance (risk-adjusted operative mortality) was evaluated and classified when including the benchmark versus all eligible operations. Overall, 207 types of operations were performed during the study period (112,140 total cases). Few operations were performed across all centers; only 25% were performed at least once by 75% or more of centers. There was 7.9-fold variation across centers in the proportion of total cases comprising high-complexity cases (STAT 5). In contrast, the benchmark operations made up 36% of cases, and all but 2 were performed by at least 90% of centers. When evaluating performance based on benchmark versus all operations, 15% of centers changed performance classification; 85% remained unchanged. Benchmark versus all operation methodology was associated with lower power, with 35% versus 78% of centers meeting sample size thresholds. There is wide variation in congenital heart surgery case mix across centers. Metrics based on benchmark versus all operations are associated with strengths (less heterogeneity) and weaknesses (lower power), and lead to differing performance classification for some centers. These findings have implications for ongoing efforts to optimize performance assessment, including choice of target population and appropriate interpretation of reported metrics. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Legislative Issues in Disclosing Financial Conflicts of Interest to Participants in Biomedical Research: Effectiveness and Methodology.

Science.gov (United States)

Kim, Jae Sun

2017-12-01

This research focuses on the analysis regarding disclosure of financial conflicts of interest (FCOI) after Gelsinger v. University of Pennsylvania (Penn). The main legal issue was that the participants did not have enough opportunity to make an autonomous decision about participating in the research because he was not informed about the researchers' and the institution's substantial FCOI. The disclosure system was adopted by the Code of Federal Regulations. Under the regulation, researchers and institutions need to report FCOI over $5,000 to the institution, and the internal review boards have to report to the federal authority if needed. In case of human research, the disclosure to Food and Drug Administration is mandatory. FCOI disclosure system would help participants to make an autonomous decision, and increase trust to the research process and researchers. Moreover, the system would let researchers keep fiduciary duty while (possibly) lowering legal liability in case of a lawsuit. There were discussions about the disclosure methodology in the United States. However, there have not been a lot of discussions in Korea even after the "Humidifier Disinfectant" case. Therefore, new legislations need to be considered. First, the system requires disclosure funded by not only government but also private institutions. Second, like California Supreme Court, the subject would be reviewed under the reasonable person standard by participants, including patents, equity, and stock. Third, the disclosure needs to include simple or brief explanation to the FCOI to be better understood by the participants. Fourth, the disclosure should be in the informed consent process. © 2017 The Korean Academy of Medical Sciences.

Methodology for using root locus technique for mobile robots path planning

Directory of Open Access Journals (Sweden)

Mario Ricardo Arbulú Saavedra

2015-11-01

Full Text Available This paper shows the analysis and the implementation methodology of the technique of dynamic systems roots location used in free-obstacle path planning for mobile robots. First of all, the analysis and morphologic behavior identification of the paths depending on roots location in complex plane are performed, where paths type and their attraction and repulsion features in the presence of other roots similarly to the obtained with artificial potential fields are identified. An implementation methodology for this technique of mobile robots path planning is proposed, starting from three different methods of roots location for obstacles in the scene. Those techniques change depending on the obstacle key points selected for roots, such as borders, crossing points with original path, center and vertices. Finally, a behavior analysis of general technique and the effectiveness of each tried method is performed, doing 20 tests for each one, obtaining a value of 65% for the selected method. Modifications and possible improvements to this methodology are also proposed.

Change mechanisms of schema-centered group psychotherapy with personality disorder patients.

Directory of Open Access Journals (Sweden)

Wolfgang Tschacher

Full Text Available BACKGROUND: This study addressed the temporal properties of personality disorders and their treatment by schema-centered group psychotherapy. It investigated the change mechanisms of psychotherapy using a novel method by which psychotherapy can be modeled explicitly in the temporal domain. METHODOLOGY AND FINDINGS: 69 patients were assigned to a specific schema-centered behavioral group psychotherapy, 26 to social skills training as a control condition. The largest diagnostic subgroups were narcissistic and borderline personality disorder. Both treatments offered 30 group sessions of 100 min duration each, at a frequency of two sessions per week. Therapy process was described by components resulting from principal component analysis of patients' session-reports that were obtained after each session. These patient-assessed components were Clarification, Bond, Rejection, and Emotional Activation. The statistical approach focused on time-lagged associations of components using time-series panel analysis. This method provided a detailed quantitative representation of therapy process. It was found that Clarification played a core role in schema-centered psychotherapy, reducing rejection and regulating the emotion of patients. This was also a change mechanism linked to therapy outcome. CONCLUSIONS/SIGNIFICANCE: The introduced process-oriented methodology allowed to highlight the mechanisms by which psychotherapeutic treatment became effective. Additionally, process models depicted the actual patterns that differentiated specific diagnostic subgroups. Time-series analysis explores Granger causality, a non-experimental approximation of causality based on temporal sequences. This methodology, resting upon naturalistic data, can explicate mechanisms of action in psychotherapy research and illustrate the temporal patterns underlying personality disorders.

Amineborane Based Chemical Hydrogen Storage - Final Report

International Nuclear Information System (INIS)

Sneddon, Larry G.

2011-01-01

The development of efficient and safe methods for hydrogen storage is a major hurdle that must be overcome to enable the use of hydrogen as an alternative energy carrier. The objectives of this project in the DOE Center of Excellence in Chemical Hydride Storage were both to develop new methods for on-demand, low temperature hydrogen release from chemical hydrides and to design high-conversion off-board methods for chemical hydride regeneration. Because of their reactive protic (N-H) and hydridic (B-H) hydrogens and high hydrogen contents, amineboranes such as ammonia borane, NH 3 BH 3 (AB), 19.6-wt% H 2 , and ammonia triborane NH 3 B 3 H 7 (AT), 17.7-wt% H 2 , were initially identified by the Center as promising, high-capacity chemical hydrogen storage materials with the potential to store and deliver molecular hydrogen through dehydrogenation and hydrolysis reactions. In collaboration with other Center partners, the Penn project focused both on new methods to induce amineborane H 2 -release and on new strategies for the regeneration the amineborane spent-fuel materials. The Penn approach to improving amineborane H 2 -release focused on the use of ionic liquids, base additives and metal catalysts to activate AB dehydrogenation and these studies successfully demonstrated that in ionic liquids the AB induction period that had been observed in the solid-state was eliminated and both the rate and extent of AB H2-release were significantly increased. These results have clearly shown that, while improvements are still necessary, many of these systems have the potential to achieve DOE hydrogen-storage goals. The high extent of their H 2 -release, the tunability of both their H 2 materials weight-percents and release rates, and their product control that is attained by either trapping or suppressing unwanted volatile side products, such as borazine, continue to make AB/ionic-liquid based systems attractive candidates for chemical hydrogen storage applications. These

Amineborane Based Chemical Hydrogen Storage - Final Report

Energy Technology Data Exchange (ETDEWEB)

Sneddon, Larry G.

2011-04-21

The development of efficient and safe methods for hydrogen storage is a major hurdle that must be overcome to enable the use of hydrogen as an alternative energy carrier. The objectives of this project in the DOE Center of Excellence in Chemical Hydride Storage were both to develop new methods for on-demand, low temperature hydrogen release from chemical hydrides and to design high-conversion off-board methods for chemical hydride regeneration. Because of their reactive protic (N-H) and hydridic (B-H) hydrogens and high hydrogen contents, amineboranes such as ammonia borane, NH3BH3 (AB), 19.6-wt% H2, and ammonia triborane NH3B3H7 (AT), 17.7-wt% H2, were initially identified by the Center as promising, high-capacity chemical hydrogen storage materials with the potential to store and deliver molecular hydrogen through dehydrogenation and hydrolysis reactions. In collaboration with other Center partners, the Penn project focused both on new methods to induce amineborane H2-release and on new strategies for the regeneration the amineborane spent-fuel materials. The Penn approach to improving amineborane H2-release focused on the use of ionic liquids, base additives and metal catalysts to activate AB dehydrogenation and these studies successfully demonstrated that in ionic liquids the AB induction period that had been observed in the solid-state was eliminated and both the rate and extent of AB H2-release were significantly increased. These results have clearly shown that, while improvements are still necessary, many of these systems have the potential to achieve DOE hydrogen-storage goals. The high extent of their H2­-release, the tunability of both their H2 materials weight-percents and release rates, and their product control that is attained by either trapping or suppressing unwanted volatile side products, such as borazine, continue to make AB/ionic­-liquid based systems attractive candidates for chemical hydrogen storage applications. These studies also

A collection of publications and articles for a light water ultra-safe plant concept

International Nuclear Information System (INIS)

Klevans, E.H.

1988-01-01

This collection contains reports titled: ''The Penn State Ultra-Safe Reactor Concept; '' ''Ultra Safe Nuclear Power; '' ''Use of the Modular Modeling System, in the Design of the Penn State Advanced Light Water Reactor; '' ''Use of the Modular Modeling System in Severe Transient Analysis of Penn State Advanced Light Water Reactor; '' ''PSU Engineers' Reactor Design May Stop a Future TMI; '' and ''The Penn State Advanced Light Water reactor Concept.''

Benefits Analysis of Multi-Center Dynamic Weather Routes

Science.gov (United States)

Sheth, Kapil; McNally, David; Morando, Alexander; Clymer, Alexis; Lock, Jennifer; Petersen, Julien

2014-01-01

Dynamic weather routes are flight plan corrections that can provide airborne flights more than user-specified minutes of flying-time savings, compared to their current flight plan. These routes are computed from the aircraft's current location to a flight plan fix downstream (within a predefined limit region), while avoiding forecasted convective weather regions. The Dynamic Weather Routes automation has been continuously running with live air traffic data for a field evaluation at the American Airlines Integrated Operations Center in Fort Worth, TX since July 31, 2012, where flights within the Fort Worth Air Route Traffic Control Center are evaluated for time savings. This paper extends the methodology to all Centers in United States and presents benefits analysis of Dynamic Weather Routes automation, if it was implemented in multiple airspace Centers individually and concurrently. The current computation of dynamic weather routes requires a limit rectangle so that a downstream capture fix can be selected, preventing very large route changes spanning several Centers. In this paper, first, a method of computing a limit polygon (as opposed to a rectangle used for Fort Worth Center) is described for each of the 20 Centers in the National Airspace System. The Future ATM Concepts Evaluation Tool, a nationwide simulation and analysis tool, is used for this purpose. After a comparison of results with the Center-based Dynamic Weather Routes automation in Fort Worth Center, results are presented for 11 Centers in the contiguous United States. These Centers are generally most impacted by convective weather. A breakdown of individual Center and airline savings is presented and the results indicate an overall average savings of about 10 minutes of flying time are obtained per flight.

75 FR 60763 - Center for Scientific Review; Notice of Closed Meetings

Science.gov (United States)

2010-10-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Center for Scientific Review... personal privacy. Name of Committee: Healthcare Delivery and Methodologies Integrated Review Group, Biostatistical Methods and Research Design Study Section. Date: October 21, 2010. Time: 8 a.m. to 5 p.m. Agenda...

Advanced piloted aircraft flight control system design methodology. Volume 1: Knowledge base

Science.gov (United States)

Mcruer, Duane T.; Myers, Thomas T.

1988-01-01

The development of a comprehensive and electric methodology for conceptual and preliminary design of flight control systems is presented and illustrated. The methodology is focused on the design stages starting with the layout of system requirements and ending when some viable competing system architectures (feedback control structures) are defined. The approach is centered on the human pilot and the aircraft as both the sources of, and the keys to the solution of, many flight control problems. The methodology relies heavily on computational procedures which are highly interactive with the design engineer. To maximize effectiveness, these techniques, as selected and modified to be used together in the methodology, form a cadre of computational tools specifically tailored for integrated flight control system preliminary design purposes. While theory and associated computational means are an important aspect of the design methodology, the lore, knowledge and experience elements, which guide and govern applications are critical features. This material is presented as summary tables, outlines, recipes, empirical data, lists, etc., which encapsulate a great deal of expert knowledge. Much of this is presented in topical knowledge summaries which are attached as Supplements. The composite of the supplements and the main body elements constitutes a first cut at a a Mark 1 Knowledge Base for manned-aircraft flight control.

Scalability analysis methodology for passive optical interconnects in data center networks using PAM

Science.gov (United States)

Lin, R.; Szczerba, Krzysztof; Agrell, Erik; Wosinska, Lena; Tang, M.; Liu, D.; Chen, J.

2017-11-01

A framework is developed for modeling the fundamental impairments in optical datacenter interconnects, i.e., the power loss and the receiver noises. This framework makes it possible, to analyze the trade-offs between data rates, modulation order, and number of ports that can be supported in optical interconnect architectures, while guaranteeing that the required signal-to-noise ratios are satisfied. To the best of our knowledge, this important assessment methodology is not yet available. As a case study, the trade-offs are investigated for three coupler-based top-of-rack interconnect architectures, which suffer from serious insertion loss. The results show that using single-port transceivers with 10 GHz bandwidth, avalanche photodiode detectors, and quadratical pulse amplitude modulation, more than 500 ports can be supported.

Methodology applied to develop the DHIE: applied methodology

CSIR Research Space (South Africa)

Herselman, Marlien

2016-12-01

Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

Building an integrated methodology of learning that can optimally support improvements in healthcare.

Science.gov (United States)

Lynn, Joanne

2011-04-01

The methods for healthcare reform are strikingly underdeveloped, with much reliance on political power. A methodology that combined methods from sources such as clinical trials, experience-based wisdom, and improvement science could be among the aims of the upcoming work in the USA on comparative effectiveness and on the agenda of the Center for Medicare and Medicaid Innovation in the Centers for Medicare and Medicaid Services. Those working in quality improvement have an unusual opportunity to generate substantial input into these processes through professional organisations such as the Academy for Healthcare Improvement and dominant leadership organisations such as the Institute for Healthcare Improvement.

Comprehensive Revenue and Expense Data Collection Methodology for Teaching Health Centers: A Model for Accountable Graduate Medical Education Financing.

Science.gov (United States)

Regenstein, Marsha; Snyder, John E; Jewers, Mariellen Malloy; Nocella, Kiki; Mullan, Fitzhugh

2018-04-01

Despite considerable federal investment, graduate medical education financing is neither transparent for estimating residency training costs nor accountable for effectively producing a physician workforce that matches the nation's health care needs. The Teaching Health Center Graduate Medical Education (THCGME) program's authorization in 2010 provided an opportunity to establish a more transparent financing mechanism. We developed a standardized methodology for quantifying the necessary investment to train primary care physicians in high-need communities. The THCGME Costing Instrument was designed utilizing guidance from site visits, financial documentation, and expert review. It collects educational outlays, patient service expenses and revenues from residents' ambulatory and inpatient care, and payer mix. The instrument was fielded from April to November 2015 in 43 THCGME-funded residency programs of varying specialties and organizational structures. Of the 43 programs, 36 programs (84%) submitted THCGME Costing Instruments. The THCGME Costing Instrument collected standardized, detailed cost data on residency labor (n = 36), administration and educational outlays (n = 33), ambulatory care visits and payer mix (n = 30), patient service expenses (n =  26), and revenues generated by residents (n = 26), in contrast to Medicare cost reports, which include only costs incurred by residency programs. The THCGME Costing Instrument provides a model for calculating evidence-based costs and revenues of community-based residency programs, and it enhances accountability by offering an approach that estimates residency costs and revenues in a range of settings. The instrument may have feasibility and utility for application in other residency training settings.

Administration, Administration of the knowledge and methodological work in the Complex Educational Disciplines

Directory of Open Access Journals (Sweden)

Tania Alina Mena-Silva

2014-06-01

Full Text Available Today the educational disciplines have evolved to a superior and more complex stadium that has been materialized in that converge in a discipline and relate diverse study modalities, professors' type and teaching matters, that makes more complex the work of the professor when having to prepare metodológicamente the subject in more than an occasion, it is materialized this way the Complex Educational Discipline. The administration and the administration of the knowledge are constituted in essential elements for the realization of the methodological work with the community of professors, starting from a process of methodological preparation centered in the professor.

Identification of tasks of maintenance centered in the reliability

International Nuclear Information System (INIS)

Torres V, A.; Rivero O, J.J.

2004-01-01

The methodology of Reliability Centered Maintenance (RCM) it has become, after the discovery of their advantages, an objective of many industrial facilities to optimize their maintenance. However, diverse subjective factors affect the determination of the parameters (technical of predictive to apply and times among interventions) that characterize the tasks of RCM. A method to determine the monitoring tasks at condition and the times more recommended for to apply the monitoring by time and the search of faults, with focus in system. This methodology has been computerized inside the code MOSEG Win Ver 1.0. The same has been applied with success to the determination of tasks of RCM in industrial objectives. (Author)

Implementing the Customer Contact Center: An Opportunity to Create a Valid Measurement System for Assessing and Improving a Library's Telephone Services

Science.gov (United States)

Murphy, Sarah Anne; Cerqua, Judith

2012-01-01

A customer contact center offers academic libraries the ability to consistently improve their telephone, e-mail, and IM services. This paper discusses the establishment of a contact center and the benefits of implementing the contact center model at this institution. It then introduces a practical methodology for developing a valid measurement…

Adaptation of Lean Six Sigma Methodologies for the Evaluation of Veterans Choice Program at 3 Urban Veterans Affairs Medical Centers.

Science.gov (United States)

Ball, Sherry L; Stevenson, Lauren D; Ladebue, Amy C; McCreight, Marina S; Lawrence, Emily C; Oestreich, Taryn; Lambert-Kerzner, Anne C

2017-07-01

The Veterans Health Administration (VHA) is adapting to meet the changing needs of our Veterans. VHA leaders are promoting quality improvement strategies including Lean Six Sigma (LSS). This study used LSS tools to evaluate the Veterans Choice Program (VCP), a program that aims to improve access to health care services for eligible Veterans by expanding health care options to non-VHA providers. LSS was utilized to assess the current process and efficiency patterns of the VCP at 3 VHA Medical Centers. LSS techniques were used to assess data obtained through semistructured interviews with Veterans, staff, and providers to describe and evaluate the VCP process by identifying wastes and defects. The LSS methodology facilitated the process of targeting priorities for improvement and constructing suggestions to close identified gaps and inefficiencies. Identified key process wastes included inefficient exchange of clinical information between stakeholders in and outside of the VHA; poor dissemination of VCP programmatic information; shortages of VCP-participating providers; duplication of appointments; declines in care coordination; and lack of program adaptability to local processes. Recommendations for improvement were formulated using LSS. This evaluation illustrates how LSS can be utilized to assess a nationally mandated health care program. By focusing on stakeholder, staff, and Veteran perspectives, process defects in the VCP were identified and improvement recommendations were made. However, the current LSS language used is not intuitive in health care and similar applications of LSS may consider using new language and goals adapted specifically for health care.

Application of central composite face-centered design and response surface methodology for the optimization of electro-Fenton decolorization of Azure B dye.

Science.gov (United States)

Rosales, E; Sanromán, M A; Pazos, M

2012-06-01

The aim of this work was to improve the ability of electro-Fenton technique for the remediation of wastewater contaminated with synthetic dyes using a model azo dye such as Azure B. Batch experiments were conducted to study the effects of main parameters, such as dye concentration, electrode surface area, treatment time, and voltage. In this study, central composite face-centered experimental design matrix and response surface methodology were applied to design the experiments and evaluate the interactive effects of the four studied parameters. A total of 30 experimental runs were set, and the kinetic data were analyzed using first- and second-order models. The experimental data fitted to the empirical second-order model of a suitable degree for the maximum decolorization of Azure B by electro-Fenton treatment. ANOVA analysis showed high coefficient of determination value (R(2) = 0.9835) and reasonable second-order regression prediction. Pareto analysis suggests that the variables, time, and voltage produce the largest effect on the decolorization rate. Optimum conditions suggested by the second-order polynomial regression model for attaining maximum decolorization were dye concentration 4.83 mg/L, electrode surface area 15 cm(2), voltage 14.19 V, and treatment time of 34.58 min.

[Public health and mental health: methodological tools to evaluate the Brazilian Network of Referral Centers for Psycho-Social Care (CAPS) in the Brazilian Unified Health System].

Science.gov (United States)

Onocko-Campos, Rosana Teresa; Furtado, Juarez Pereira

2006-05-01

This article presents a preliminary discussion of potential methodological tools for qualitative research on the Network of Referral Centers for Psycho-Social Care (CAPS) in the Brazilian Unified Health System (SUS). The relevance of mental health within the field of public health is examined. The study focuses on the high prevalence of mental disorders and the disproportionate lack of studies on the interface between mental health and public health. The establishment of an interdisciplinary field between public health and mental health is proposed to meet common needs by achieving similar perspectives in knowledge and practice. A particular group of tools is proposed, emphasizing the importance of reclaiming and guaranteeing the roles of various social actors to shape the assessment process, the need for collecting and standardizing academic studies on the topic, and the importance of promoting a new research field focusing on public health policies to support policymakers, managers, and health teams in reshaping their practices.

Leininger's Ethnonursing Research Methodology and Studies of Cancer Survivors: A Review.

Science.gov (United States)

Farren, Arlene T

2015-09-01

The purpose of this article is to present the findings of a literature review regarding the use of Leininger's ethnonursing research methodology (ENRM) in studies addressing adult cancer survivors. It is important to learn about differences and similarities among cancer survivors' experiences so that patient-centered, culturally congruent care can be provided. A review of the literature was conducted using databases such as CINAHL and MEDLINE. Search terms included variations on ENRM and cancer survivors. The results were a small number of published studies that used the ENRM examining breast cancer survivors' perceptions and experiences. A review instrument was developed to estimate study quality based on established criteria. The studies are critiqued in relation to the theory-based methodology, evaluation criteria for qualitative research, and study findings are summarized. The author concludes that although there is a paucity of research using ENRM with adult cancer survivors, the preliminary findings of the included studies contribute to what is known about breast cancer survivors. Implications for research include recommendations to increase the use of ENRM to discover the universal and diverse experiences of care practices in adult cancer survivors and use the evidence to develop patient-centered, culturally congruent, quality care for cancer survivors. © The Author(s) 2014.

Methodology for Determining the Avoidable and Fully Allocated Costs of Amtrak Routes : Volume III, Appendix B-H

Science.gov (United States)

2009-08-01

The Federal Railroad Administration tasked the Volpe Center with developing a methodology for determining the avoidable and fully allocated costs of Amtrak routes. Avoidable costs are costs that would not be incurred if an Amtrak route were discontin...

75 FR 19408 - Center for Scientific Review; Notice of Closed Meetings

Science.gov (United States)

2010-04-14

[email protected]csr.nih.gov . Name of Committee: Healthcare Delivery and Methodologies, Community-Level Health...-1503, [email protected]csr.nih.gov . Name of Committee: Center for Scientific Review Special Emphasis..., Bethesda, MD 20892, 301-435- 2406, [email protected]csr.nih.gov . Name of Committee: Oncology 2--Translational...

An innovative methodology for the transmission of information, using Sensor Web Enablement, from ongoing research vessels.

Science.gov (United States)

Sorribas, Jordi; Sinquin, Jean Marc; Diviacco, Paolo; De Cauwer, Karien; Danobeitia, Juanjo; Olive, Joan; Bermudez, Luis

2013-04-01

Research vessels are sophisticated laboratories with complex data acquisition systems for a variety of instruments and sensors that acquire real-time information of many different parameters and disciplines. The overall data and metadata acquired commonly spread using well-established standards for data centers; however, the instruments and systems on board are not always well described and it may miss significant information. Thus, important information such as instrument calibration or operational data often does not reach to the data center. The OGC Sensor Web Enablement standards provide solutions to serve complex data along with the detailed description of the process used to obtain them. We show an innovative methodology on how to use Sensor Web Enablement standards to describe and serve information from the research vessels, the data acquisition systems used onboard, and data sets resulting from the onboard work. This methodology is designed to be used in research vessels, but also applies to data centers to avoid loss of information in between The proposed solution considers (I) the difficulty to describe a multidisciplinary and complex mobile sensor system, (II) it can be easily integrated with data acquisition systems onboard, (III) it uses the complex and incomplete typical vocabulary in marine disciplines, (IV) it provides contacts with the data and metadata services at the Data Centers, and (V) it manages the configuration changes with time of the instrument.

User-centered Technologies For Blind Children

Directory of Open Access Journals (Sweden)

Jaime Sánchez

2008-01-01

Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

Methodological approaches to assessing of country’s financial capacity

Directory of Open Access Journals (Sweden)

A.Yu. Polchanov

2017-12-01

Full Text Available This research is devoted to the theoretical basis of country’s financial capacity assessment, its specificities and algorithm. The aim of the investigation is the generalization of methodological approaches to evaluating country’s financial capacity. The author determines that the assessment involves preparatory, analytical, and final stages. The special attention is paid to the information based on the analysis, demands on it, impact of changes in methodology, dynamics of macroeconomic indicators. The establishment of the united analytical center for assessment of financial capacity of the state for post-conflict recovery is proposed. The results of the critical review of the publications in this field have helped to improve the classification of country’s financial capacity assessment methods by providing some new attributes such as the focus of the evaluation and type of intelligence. The problem of using unlicensed software to assess the financial capacity of the state and the associated risk have not been left without attention.

Business Performer-Centered Design of User Interfaces

Science.gov (United States)

Sousa, Kênia; Vanderdonckt, Jean

Business Performer-Centered Design of User Interfaces is a new design methodology that adopts business process (BP) definition and a business performer perspective for managing the life cycle of user interfaces of enterprise systems. In this methodology, when the organization has a business process culture, the business processes of an organization are firstly defined according to a traditional methodology for this kind of artifact. These business processes are then transformed into a series of task models that represent the interactive parts of the business processes that will ultimately lead to interactive systems. When the organization has its enterprise systems, but not yet its business processes modeled, the user interfaces of the systems help derive tasks models, which are then used to derive the business processes. The double linking between a business process and a task model, and between a task model and a user interface model makes it possible to ensure traceability of the artifacts in multiple paths and enables a more active participation of business performers in analyzing the resulting user interfaces. In this paper, we outline how a human-perspective is used tied to a model-driven perspective.

Scenario development methodologies

International Nuclear Information System (INIS)

Eng, T.; Hudson, J.; Stephansson, O.

1994-11-01

In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are a) Event tree analysis, b) Influence diagrams and c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs

Importance of the documentation of the manual of quality and procedures handbook in the nuclear technology center

International Nuclear Information System (INIS)

Domech More, J.; Bolanos Hernandez, R.; Quitero Rosello, R.; Fernandez Rondon, M.; Milian Lorenzo, D.; Rodriguez Gual, M.

1997-01-01

In the present work is presented the methodology used for the elaboration of manual of quality of the Nuclear Technology Center and the technical Procedures Handbook for the execution of Preliminary Safety report of the Juragua Nuclear Power Plant, as well as the importance that has this documentation for the work of the center

Archetype modeling methodology.

Science.gov (United States)

Moner, David; Maldonado, José Alberto; Robles, Montserrat

2018-03-01

Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

Digital database architecture and delineation methodology for deriving drainage basins, and a comparison of digitally and non-digitally derived numeric drainage areas

Science.gov (United States)

Dupree, Jean A.; Crowfoot, Richard M.

2012-01-01

The drainage basin is a fundamental hydrologic entity used for studies of surface-water resources and during planning of water-related projects. Numeric drainage areas published by the U.S. Geological Survey water science centers in Annual Water Data Reports and on the National Water Information Systems (NWIS) Web site are still primarily derived from hard-copy sources and by manual delineation of polygonal basin areas on paper topographic map sheets. To expedite numeric drainage area determinations, the Colorado Water Science Center developed a digital database structure and a delineation methodology based on the hydrologic unit boundaries in the National Watershed Boundary Dataset. This report describes the digital database architecture and delineation methodology and also presents the results of a comparison of the numeric drainage areas derived using this digital methodology with those derived using traditional, non-digital methods. (Please see report for full Abstract)

De/colonizing methodologies in science education: rebraiding research theory-practice-ethics with Indigenous theories and theorists

Science.gov (United States)

Higgins, Marc; Kim, Eun-Ji Amy

2018-02-01

The purpose of this article is to differentially engage in the work of thinking with Indigenous theorists and theories with decolonizing science education research methodologies in mind. As a rejoinder to Tracey McMahon, Emily Griese, and DenYelle Baete Kenyon's Cultivating Native American scientists: An application of an Indigenous model to an undergraduate research experience, we extend the notion of educationally centering Indigenous processes, pedagogies, and protocols by considering methodology a site in which (neo-)colonial logics often linger. We suggest that (re)designing methodology with Indigenous theorists and theories is an important act of resistance, refusal, and resignification; we demonstrate this significance through braiding together narratives of our engagement in this task and provide insights as to what is produced or producible.

A Computer-Based System Integrating Instruction and Information Retrieval: A Description of Some Methodological Considerations.

Science.gov (United States)

Selig, Judith A.; And Others

This report, summarizing the activities of the Vision Information Center (VIC) in the field of computer-assisted instruction from December, 1966 to August, 1967, describes the methodology used to load a large body of information--a programed text on basic opthalmology--onto a computer for subsequent information retrieval and computer-assisted…

Methodology for cloud-based design of robots

Science.gov (United States)

Ogorodnikova, O. M.; Vaganov, K. A.; Putimtsev, I. D.

2017-09-01

This paper presents some important results for cloud-based designing a robot arm by a group of students. Methodology for the cloud-based design was developed and used to initiate interdisciplinary project about research and development of a specific manipulator. The whole project data files were hosted by Ural Federal University data center. The 3D (three-dimensional) model of the robot arm was created using Siemens PLM software (Product Lifecycle Management) and structured as a complex mechatronics product by means of Siemens Teamcenter thin client; all processes were performed in the clouds. The robot arm was designed in purpose to load blanks up to 1 kg into the work space of the milling machine for performing student's researches.

Proceedings of RIKEN BNL Research Center workwhop on RHIC spin

Energy Technology Data Exchange (ETDEWEB)

SOFFER,J.

1999-10-06

This RHIC Spin Workshop is the 1999 annual meeting of the RHIC Spin Collaboration, and the second to be hosted at Brookhaven and sponsored by the RIKEN BNL Research Center. The previous meetings were at Brookhaven (1998), Marseille (1996), MIT in 1995, Argonne 1994, Tucson in 1991, and the Polarized Collider Workshop at Penn State in 1990. As noted last year, the Center provides a home for combined work on spin by theorists, experimenters, and accelerator physicists. This proceedings, as last year, is a compilation of 1 page summaries and 5 selected transparencies for each speaker. It is designed to be available soon after the workshop is completed. Speakers are welcome to include web or other references for additional material. The RHIC spin program and RHIC are rapidly becoming reality. RHIC has completed its first commissioning run, as described here by Steve Peggs. The first Siberian Snake for spin has been completed and is being installed in RHIC. A new polarized source from KEK and Triumf with over 1 milliampere of polarized H{sup minus} is being installed, described by Anatoli Zelenski. They have had a successful test of a new polarimeter for RHIC, described by Kazu Kurita and Haixin Huang. Spin commissioning is expected next spring (2000), and the first physics run for spin is anticipated for spring 2001. The purpose of the workshop is to get everyone together about once per year and discuss goals of the spin program, progress, problems, and new ideas. They also have many separate regular forums on spin. There are spin discussion sessions every Tuesday, now organized by Naohito Saito and Werner Vogelsang. The spin discussion schedule and copies of presentations are posted on http://riksg01.rhic.bnl.gov/rsc. Speakers and other spinners are encouraged to come to BNL and to lead a discussion on your favorite idea. They also have regular polarimeter and snake meetings on alternate Thursdays, led by Bill McGahern, the lead engineer for the accelerator spin

Proceedings of RIKEN BNL Research Center workshop on RHIC spin

International Nuclear Information System (INIS)

Soffer, J.

1999-01-01

This RHIC Spin Workshop is the 1999 annual meeting of the RHIC Spin Collaboration, and the second to be hosted at Brookhaven and sponsored by the RIKEN BNL Research Center. The previous meetings were at Brookhaven (1998), Marseille (1996), MIT in 1995, Argonne 1994, Tucson in 1991, and the Polarized Collider Workshop at Penn State in 1990. As noted last year, the Center provides a home for combined work on spin by theorists, experimenters, and accelerator physicists. This proceedings, as last year, is a compilation of 1 page summaries and 5 selected transparencies for each speaker. It is designed to be available soon after the workshop is completed. Speakers are welcome to include web or other references for additional material. The RHIC spin program and RHIC are rapidly becoming reality. RHIC has completed its first commissioning run, as described here by Steve Peggs. The first Siberian Snake for spin has been completed and is being installed in RHIC. A new polarized source from KEK and Triumf with over 1 milliampere of polarized H minus is being installed, described by Anatoli Zelenski. They have had a successful test of a new polarimeter for RHIC, described by Kazu Kurita and Haixin Huang. Spin commissioning is expected next spring (2000), and the first physics run for spin is anticipated for spring 2001. The purpose of the workshop is to get everyone together about once per year and discuss goals of the spin program, progress, problems, and new ideas. They also have many separate regular forums on spin. There are spin discussion sessions every Tuesday, now organized by Naohito Saito and Werner Vogelsang. The spin discussion schedule and copies of presentations are posted on http://riksg01.rhic.bnl.gov/rsc. Speakers and other spinners are encouraged to come to BNL and to lead a discussion on your favorite idea. They also have regular polarimeter and snake meetings on alternate Thursdays, led by Bill McGahern, the lead engineer for the accelerator spin effort

Integrative Problem-Centered Therapy: Toward the Synthesis of Family and Individual Psychotherapies.

Science.gov (United States)

Pinsof, William M.

1983-01-01

Presents an overview of the Integrative Problem-Centered Therapy (IPCT) Model, and describes its core principles and premises, and basic methodological steps. The IPCT provides a technique for applying individual and family therapy and behavioral, communicational, and psychodynamic orientations to client problems. Its goal is to create efficient…

SWOT analysis in Sina Trauma and Surgery Research Center.

Science.gov (United States)

Salamati, Payman; ashraf Eghbali, Ali; Zarghampour, Manijeh

2014-01-01

The present study was conducted with the aim of identifying and evaluating the internal and external factors, affecting the Sina Trauma and Surgery Research Center, affiliated to Tehran University of Medical Sciences and propose some of related strategies to senior managers. We used a combined quantitative and qualitative methodology. Our study population consisted of personnel (18 individuals) at Sina Trauma and Surgery Research Center. Data-collection tools were the group discussions and the questionnaires. Data were analyzed with descriptive statistics and SWOT (Strength, Weakness, Opportunities and Threats) analysis. 18 individuals participated in sessions, consisting of 8 women (44.4%) and 10 men (55.6%). The final scores were 2.45 for internal factors (strength-weakness) and 2.17 for external factors (opportunities-threats). In this study, we proposed 36 strategies (10 weakness-threat strategies, 10 weakness-opportunity strategies, 7 strength-threat strategies, and 9 strength-opportunity strategies). The current status of Sina Trauma and Surgery Research Center is threatened weak. We recommend the center to implement the proposed strategies.

Evolution of teaching and evaluation methodologies: The experience in the computer programming course at the Universidad Nacional de Colombia

Directory of Open Access Journals (Sweden)

Jonatan Gomez Perdomo

2014-05-01

Full Text Available In this paper, we present the evolution of a computer-programming course at the Universidad Nacional de Colombia (UNAL. The teaching methodology has evolved from a linear and non-standardized methodology to a flexible, non-linear and student-centered methodology. Our methodology uses an e-learning platform that supports the learning process by offering students and professors custom navigation between the content and material in an interactive way (book chapters, exercises, videos. Moreover, the platform is open access, and approximately 900 students from the university take this course each term. However, our evaluation methodology has evolved from static evaluations based on paper tests to an online process based on computer adaptive testing (CAT that chooses the questions to ask a student and assigns the student a grade according to the student’s ability.

Guide for monitoring effectiveness of utility Reliability Centered Maintenance (RCM) programs

International Nuclear Information System (INIS)

Midgett, W.D.; Wilson, J.F.; Krochmal, D.F.; Owsenek, L.W.

1991-02-01

Reliability centered maintenance (RCM) programs help utilities optimize preventive maintenance efforts while improving plant safety and economy through increased dependability of plant components. The project team developed this guide and accompanying methodology based on status updates from the Ginna and San Onofre demonstration projects. These updates addressed areas ranging from system selection to the effectiveness of RCM program implementation. In addition, the team incorporated information from a 12-utility survey soliciting opinions on the need for a methodology to monitor RCM cost-effectiveness. An analysis of the 12-utility survey showed that no techniques had been developed to measure RCM program cost-effectiveness. Thus, this guide addresses two key areas: Pros and cons of various monitoring techniques available to assess the overall effectiveness of RCM and a methodology for specifically evaluating the cost-effectiveness of RCM programs. 1 fig

[Local planning: the speech of basic health care center manager].

Science.gov (United States)

Cubas, Márcia Regina

2005-01-01

As planning is understood as a management tool, this article offers an argument through the speech framework of Basic Health Care Center Managers in the city of Curitiba-PR, by means of the Collective Subject Speech Methodology on local planning aspects. Its purpose is to bring local managers to a reflection concerning their styles, practices and experiences, as well as to collaborate with central level leading teams towards building their planning processes in an upward, participatory, communicative and strategic way. Considerations of the speeches built from central ideas are presented: planning methodology; inter-sectoriality; territorial basis; team and community participation; training, autonomy and particular profile of local managers; the manager's agenda; and institutional culture.

Research Network of Tehran Defined Population: Methodology and Establishment

Directory of Open Access Journals (Sweden)

Ali-Asghar Kolahi

2015-12-01

Full Text Available Background: We need a defined population for determining prevalence and incidence of diseases, as well as conducting interventional, cohort and longitudinal studies, calculating correct and timely public health indicators, assessing actual health needs of community, performing educational programs and interventions to promote healthy lifestyle, and enhancing quality of primary health services.The objective of this project was to determine a defined population which is representative of Tehran, the Capital of Iran. This article reports the methodology and establishment of the research network of Tehran defined population.Methods: This project started by selecting two urban health centers from each of the five district health centers affiliated to Shahid Beheshti University of Medical Sciences in 2012. Inside each selected urban health center, one defined population research station was established. Two new centers have been added during 2013 and 2014. For the time being, the number of the covered population of the network has reached 40000 individuals. The most important criterion for the defined population has been to be representative of the population of Tehran. For this, we selected two urban health centers from 12 of 22 municipality districts and from each of the five different socioeconomic of Greater Tehran. Merely 80000 individuals in neighborhoods of each defined population research station were considered as control group of the project.Findings: Totally we selected 12 defined population research stations and their under-covered population developed a defined population which is representative of Tehran population.Conclusion: a population lab is ready now in metropolitan of Tehran.

Métodos para superação da dormência de sementes de quixabeira (Sideroxylon obtusifolium (Roem. & Schult. T.D.Penn..

Directory of Open Access Journals (Sweden)

Ana Clara Moura Neves Rebouças

2012-03-01

Full Text Available http://dx.doi.org/10.5902/198050985090Devido à ausência de informações sobre a metodologia para avaliação da qualidade fisiológica de sementes das espécies arbóreas medicinais, o presente trabalho teve por objetivo determinar o método mais eficiente para superação da dormência tegumentar em sementes de Sideroxylon obtusifolium (Roem. & Schult. T.D.Penn.. Além das sementes intactas, sementes que não foram submetidas a nenhum tratamento, também foram utilizados os seguintes tratamentos pré-germinativos: escarificação química - as sementes foram imersas em ácido sulfúrico absoluto por 10, 20, 30, 40, 50 e 60 minutos; escarificação mecânica - as sementes foram friccionadas manualmente em lixa nº 50, do lado oposto à micrópila, sem ou com embebição por 24 ou 48 horas; imersão em água a 100ºC por 15 ou 30 segundos; imersão em água a 80ºC até o resfriamento. Os efeitos foram avaliados através de testes de germinação e vigor. Constatou-se que houve diferença significativa entre os tratamentos para todos os parâmetros avaliados (porcentagem e velocidade de germinação, comprimento e massa seca de parte aérea e raiz primária, e a causa mais evidente da dormência é a impermeabilidade do tegumento, a qual foi superada com maior eficiência pelo método de imersão em ácido sulfúrico por 30 minutos.

Student teachers' perceptions about their experiences in a student centered course

Directory of Open Access Journals (Sweden)

Canan Perkan Zeki

2014-03-01

Full Text Available There is a growing need to provide curricula that meets the changing needs of students in higher education. To train pre-service teachers according to the demands of the new educational contexts, the move from teacher-centered curricula to learning-centered curricula is a must. The aim of this research is to examine the currently used curriculum of EGIT 450 Student Centered Education (SCE course to highlight suggestions for a better design and implementation of the SCE approach. A qualitative paradigm was used with an interpretive methodology. The participants of the study were the 37 third year undergraduate students enrolled in the course at one of the tertiary institutions in North Cyprus. Qualitative data were collected through end-of-the-semester reflective essays and analyzed through content analysis method. The findings revealed that SCE methodology helped improve student teachers' cognitive skills via holding an active role and their affective skills through group work activities emphasizing its effect on permanent learning and learning how to learn. Participants also pointed out the difficulty and complexity of the roles expected from the teacher and learners individually and cooperatively. The inefficiency of some of the teaching-learning activities, physical characteristics of the classroom setting and duration of the allocated time for the activities were among the weak aspects of the course.

Action-Centered Team Leadership Influences More than Performance

DEFF Research Database (Denmark)

Braun, Frank C.; Avital, Michel; Martz, Ben

2012-01-01

Purpose – Building on a social-technical approach to project management, the authors aim to examine the effect of action-centered leadership attributes on team member's learning, knowledge collaboration and job satisfaction during IT-related projects. Design/methodology/approach – Structural...... collaboration along with individual performance and job satisfaction, and ultimately project success. Research limitations/implications – The action-centered leadership practices construct, developed in this study, can be a good surrogate measure of what is required to be an effective leader in an IT project...... equation modeling was utilized to assess the work environment of team members as well as the leadership practices of their respective project team leaders. Data were collected with a survey questionnaire from 327 team members in a variety of organizations in 15 industry sectors including financial services...

Adaptation of a software development methodology to the implementation of a large-scale data acquisition and control system. [for Deep Space Network

Science.gov (United States)

Madrid, G. A.; Westmoreland, P. T.

1983-01-01

A progress report is presented on a program to upgrade the existing NASA Deep Space Network in terms of a redesigned computer-controlled data acquisition system for channelling tracking, telemetry, and command data between a California-based control center and three signal processing centers in Australia, California, and Spain. The methodology for the improvements is oriented towards single subsystem development with consideration for a multi-system and multi-subsystem network of operational software. Details of the existing hardware configurations and data transmission links are provided. The program methodology includes data flow design, interface design and coordination, incremental capability availability, increased inter-subsystem developmental synthesis and testing, system and network level synthesis and testing, and system verification and validation. The software has been implemented thus far to a 65 percent completion level, and the methodology being used to effect the changes, which will permit enhanced tracking and communication with spacecraft, has been concluded to feature effective techniques.

Methodology implementation in order to evaluate the biological risks in the Centre for Research and Rehabilitation of Hereditary Ataxias of Cuba: a biosecurity surveillance method

Directory of Open Access Journals (Sweden)

Dailín Cobos Valdes

2014-12-01

Full Text Available Introduction: The Center for Research and Rehabilitation of Hereditary Ataxias faces biological risks. Nevertheless a Biosafety system was not yet implemented. Objective: To apply the methodology in order to evaluate these risks Materials and Methods: Interview with the researchers of the center and the use of the methodology for evaluating biological risks designed for Cobos, 2009. Results: Fifty-three biological risks were identified and evaluated, 32 as moderated, 18 as tolerable and 3 as trivial. Such classification are crucial to establish its management priorities and represent a way of surveillance in Biosafety field. Conclusion: The results of this research represent an essential factor for the Biosafety documentation development adapted to the Center and according to the legal basis in terms of biological safety in Cuba.

The Penn Polarimeters

Directory of Open Access Journals (Sweden)

Robert H. Koch

2012-03-01

Full Text Available This report describes the inception, development and extensive use over 30 years of elliptical polarimeters at the University of Pennsylvania. The initial Mark I polarimeter design utilized oriented retarder plates and a calcite Foster-Clarke prism as the analyzer. The Mark I polarimeter was used on the Kitt Peak 0.9 m in 1969-70 to accomplish a survey of approximately 70 objects before the device was relocated to the 0.72 m reflector at the Flower and Cook Observatory. Successive generations of automation and improvements included the early-80’s optical redesign to utilize a photoelastic modulated wave plate and an Ithaco lock-in amplifier–the photoelastic modulating polarimeter. The final design in 2000 concluded with a fully remote operable device. The legacy of the polarimetric programs includes studies of close binaries, pulsating hot stars, and luminous late-type variables.

Master of engineering program for Westinghouse Electric Corporation

International Nuclear Information System (INIS)

Klevans, E.H.; Diethorn, W.S.

1991-01-01

In August of 1985, Westinghouse Corporation, via a grant to the nuclear engineering department at Pennsylvania State University, provided its professional employees the opportunity to earn a master of engineering (M. Eng.) degree in nuclear engineering in a program of evening study in the Pittsburgh area. Faculty members from the nuclear engineering department, which is 135 miles from Westinghouse, and adjunct faculty from the professional ranks of Westinghouse provided the instruction at the Westinghouse training center facility in Monroeville, Pennsylvania, A 3-yr 30-credit program was originally planned, but this was extended to a fourth year to accommodate the actual student progress toward the degree. A fifth year was added for students to complete their engineering paper. There have been benefits to both Westinghouse and Penn State from this program. Advanced education for its employees has met a Westinghouse need. For Penn State, there has been an increase in interaction with Westinghouse personnel, and this has now led to cooperative research programs with them

Topics in Number Theory Conference

CERN Document Server

Andrews, George; Ono, Ken

1999-01-01

From July 31 through August 3,1997, the Pennsylvania State University hosted the Topics in Number Theory Conference. The conference was organized by Ken Ono and myself. By writing the preface, I am afforded the opportunity to express my gratitude to Ken for beng the inspiring and driving force behind the whole conference. Without his energy, enthusiasm and skill the entire event would never have occurred. We are extremely grateful to the sponsors of the conference: The National Sci­ ence Foundation, The Penn State Conference Center and the Penn State Depart­ ment of Mathematics. The object in this conference was to provide a variety of presentations giving a current picture of recent, significant work in number theory. There were eight plenary lectures: H. Darmon (McGill University), "Non-vanishing of L-functions and their derivatives modulo p. " A. Granville (University of Georgia), "Mean values of multiplicative functions. " C. Pomerance (University of Georgia), "Recent results in primality testing. " C. ...

Center Variation and the Effect of Center and Provider Characteristics on Clinical Outcomes in Kidney Transplantation: A Systematic Review of the Evidence

Directory of Open Access Journals (Sweden)

Anne Tsampalieros

2017-10-01

Full Text Available Background: Kidney transplantation is the best treatment option for patients with end-stage renal disease. While patient-level factors affecting survival are established, the presence of variation in the management of transplant recipients remains unknown. Objective: The objective of this study was to examine center variation in kidney transplantation and identify center and provider characteristics that may be associated with clinical outcomes. Design: This is a systematic review. Data sources: Ovid Medline, Embase, and Cochrane library from inception to June 2016 were used. Study eligibility: Any study examining the association between center or provider characteristics and graft or patient survival, quality of life, or functional status were included. Results: We identified 6327 records and 24 studies met eligibility. Most studies used data registries. Characteristics evaluated include center volume (n = 17, provider volume (n = 2, provider experience (n = 1, center type (n = 2, and location of follow-up (n = 1. Outcomes assessed included graft survival (n = 24 and patient survival (n = 9. Significant center variation was described in 12 of 15 and 5 of 7 studies for graft and patient survival. There was a significant and positive association between center volume and graft and patient survival in 8 and 2 studies, respectively. Provider experience and volume were significantly associated with less allograft loss and provider volume with lower risk of death. There was no association between graft survival and location of follow-up or center type. Limitations: There was substantial heterogeneity in the variables assessed and methodology used to analyze associations. Conclusion: This systematic review found center variation in kidney transplantation. Future studies in the current era are necessary to better evaluate this important topic.

Methodologies for risk analysis in slope instability

International Nuclear Information System (INIS)

Bernabeu Garcia, M.; Diaz Torres, J. A.

2014-01-01

This paper is an approach to the different methodologies used in conducting landslide risk maps so that the reader can get a basic knowledge about how to proceed in its development. The landslide hazard maps are increasingly demanded by governments. This is because due to climate change, deforestation and the pressure exerted by the growth of urban centers, damage caused by natural phenomena is increasing each year, making this area of work a field of study with increasing importance. To explain the process of mapping a journey through each of the phases of which it is composed is made: from the study of the types of slope movements and the necessary management of geographic information systems (GIS) inventories and landslide susceptibility analysis, threat, vulnerability and risk. (Author)

Improved modeling techniques for turbomachinery flow fields

Energy Technology Data Exchange (ETDEWEB)

Lakshminarayana, B. [Pennsylvania State Univ., University Park, PA (United States); Fagan, J.R. Jr. [Allison Engine Company, Indianapolis, IN (United States)

1995-10-01

This program has the objective of developing an improved methodology for modeling turbomachinery flow fields, including the prediction of losses and efficiency. Specifically, the program addresses the treatment of the mixing stress tensor terms attributed to deterministic flow field mechanisms required in steady-state Computational Fluid Dynamic (CFD) models for turbo-machinery flow fields. These mixing stress tensors arise due to spatial and temporal fluctuations (in an absolute frame of reference) caused by rotor-stator interaction due to various blade rows and by blade-to-blade variation of flow properties. These tasks include the acquisition of previously unavailable experimental data in a high-speed turbomachinery environment, the use of advanced techniques to analyze the data, and the development of a methodology to treat the deterministic component of the mixing stress tensor. Penn State will lead the effort to make direct measurements of the momentum and thermal mixing stress tensors in high-speed multistage compressor flow field in the turbomachinery laboratory at Penn State. They will also process the data by both conventional and conditional spectrum analysis to derive momentum and thermal mixing stress tensors due to blade-to-blade periodic and aperiodic components, revolution periodic and aperiodic components arising from various blade rows and non-deterministic (which includes random components) correlations. The modeling results from this program will be publicly available and generally applicable to steady-state Navier-Stokes solvers used for turbomachinery component (compressor or turbine) flow field predictions. These models will lead to improved methodology, including loss and efficiency prediction, for the design of high-efficiency turbomachinery and drastically reduce the time required for the design and development cycle of turbomachinery.

A Methodology to Develop Entrepreneurial Networks: The Tech Ecosystem of Six African Cities

Science.gov (United States)

2014-11-01

Information Center. Greve, A. and Salaff, J. W. (2003), Social Networks and Entrepreneurship . Entrepreneurship Theory and Practice , 28: 1–22. doi...our methodology, the team quickly realized that it would have to focus on a fairly narrow sub-set of entrepreneurship . Based on relationships we have...Social Capital: A Theory of Structure and Action. Cambridge University Press, New York 2001. Liu, Y., Slotine, J., and Barabasi, A. (2011

AEGIS methodology and a perspective from AEGIS methodology demonstrations

International Nuclear Information System (INIS)

Dove, F.H.

1981-03-01

Objectives of AEGIS (Assessment of Effectiveness of Geologic Isolation Systems) are to develop the capabilities needed to assess the post-closure safety of waste isolation in geologic formation; demonstrate these capabilities on reference sites; apply the assessment methodology to assist the NWTS program in site selection, waste package and repository design; and perform repository site analyses for the licensing needs of NWTS. This paper summarizes the AEGIS methodology, the experience gained from methodology demonstrations, and provides an overview in the following areas: estimation of the response of a repository to perturbing geologic and hydrologic events; estimation of the transport of radionuclides from a repository to man; and assessment of uncertainties

An approach to human-centered design of nuclear medical equipment: the system of caption of the thyroid

International Nuclear Information System (INIS)

Santos, Isaac J.A. Luquetti; Silva, Carlos Borges da; Santana, Marcos; Carvalho, Paulo Victor R.; Oliveira, Mauro Vitor de; Mol, Antonio Carlos Mol; Grecco, Claudio Henrique; Augusto, Silas Cordeiro

2005-01-01

Technology plays an important role in modern medical centers, making health care increasingly complex, relying on complex technical equipment. This technical complexity is particularly noticeable in the nuclear medicine and can increase the risks for human error. Human error has many causes such as performance shaping factors, organizational factors and user interface design. Poorly design human system interfaces of nuclear medical equipment can increase the risks for human error. If all nuclear medical equipment had been designed with good user interfaces, incidents and accidents could be reduced as well as he time required to learn how to use the equipment. Although some manufacturers of nuclear medical equipment have already integrate human factors principles in their products, there is still a need to steer the development of nuclear medical technology toward more human-centered approach. The aim of this paper is to propose a methodology that contributes to the design, development and evaluation of nuclear medical equipment and human system interface, towards a human-centered approach. This methodology includes the ergonomic approach, based on the operator activity analysis, together with human factors standards and guidelines, questionnaires and user based testing. We describe a case study in which this methodology is being applied in evaluation of the thyroid uptake system, getting essential information and data, that ill be used in development of a new system. (author)

Text mining applied to electronic cardiovascular procedure reports to identify patients with trileaflet aortic stenosis and coronary artery disease.

Science.gov (United States)

Small, Aeron M; Kiss, Daniel H; Zlatsin, Yevgeny; Birtwell, David L; Williams, Heather; Guerraty, Marie A; Han, Yuchi; Anwaruddin, Saif; Holmes, John H; Chirinos, Julio A; Wilensky, Robert L; Giri, Jay; Rader, Daniel J

2017-08-01

Interrogation of the electronic health record (EHR) using billing codes as a surrogate for diagnoses of interest has been widely used for clinical research. However, the accuracy of this methodology is variable, as it reflects billing codes rather than severity of disease, and depends on the disease and the accuracy of the coding practitioner. Systematic application of text mining to the EHR has had variable success for the detection of cardiovascular phenotypes. We hypothesize that the application of text mining algorithms to cardiovascular procedure reports may be a superior method to identify patients with cardiovascular conditions of interest. We adapted the Oracle product Endeca, which utilizes text mining to identify terms of interest from a NoSQL-like database, for purposes of searching cardiovascular procedure reports and termed the tool "PennSeek". We imported 282,569 echocardiography reports representing 81,164 individuals and 27,205 cardiac catheterization reports representing 14,567 individuals from non-searchable databases into PennSeek. We then applied clinical criteria to these reports in PennSeek to identify patients with trileaflet aortic stenosis (TAS) and coronary artery disease (CAD). Accuracy of patient identification by text mining through PennSeek was compared with ICD-9 billing codes. Text mining identified 7115 patients with TAS and 9247 patients with CAD. ICD-9 codes identified 8272 patients with TAS and 6913 patients with CAD. 4346 patients with AS and 6024 patients with CAD were identified by both approaches. A randomly selected sample of 200-250 patients uniquely identified by text mining was compared with 200-250 patients uniquely identified by billing codes for both diseases. We demonstrate that text mining was superior, with a positive predictive value (PPV) of 0.95 compared to 0.53 by ICD-9 for TAS, and a PPV of 0.97 compared to 0.86 for CAD. These results highlight the superiority of text mining algorithms applied to electronic

Improving care at cystic fibrosis centers through quality improvement.

Science.gov (United States)

Kraynack, Nathan C; McBride, John T

2009-10-01

Quality improvement (QI) using a clinical microsystems approach provides cystic fibrosis (CF) centers the opportunity to make a significant positive impact on the health of their patients. The availability of center-specific outcomes data and the support of the Cystic Fibrosis Foundation are important advantages for these quality improvement efforts. This article illustrates how the clinical microsystems methodology can improve care delivery and outcomes by describing the gradual application of quality improvement principles over the past 5 years by the CF team at the Lewis Walker Cystic Fibrosis Center at Akron Children's Hospital in Akron, Ohio. Using the example of a project to improve the pulmonary function of the pediatric patients at our center as a framework, we describe the QI process from the initial team-building phase, through the assessment of care processes, standardization of care, and developing a culture of continuous improvement. We outline how enthusiastic commitment from physician leadership, clinical managers and central administration, the availability of coaches, and an appreciation of the importance of measurement, patient involvement, communication, and standardization are critical components for successful process improvement. Copyright Thieme Medical Publishers.

Practicing Learner-Centered Teaching: Pedagogical Design and Assessment of a Second Life Project

Science.gov (United States)

Schiller, Shu Z.

2009-01-01

Guided by the principles of learner-centered teaching methodology, a Second Life project is designed to engage students in active learning of virtual commerce through hands-on experiences and teamwork in a virtual environment. More importantly, an assessment framework is proposed to evaluate the learning objectives and learning process of the…

Clinical trial methodology

National Research Council Canada - National Science Library

Peace, Karl E; Chen, Ding-Geng

2011-01-01

... in the pharmaceutical industry, Clinical trial methodology emphasizes the importance of statistical thinking in clinical research and presents the methodology as a key component of clinical research...

Evaluating and improving incident management using historical incident data : case studies at Texas transportation management centers.

Science.gov (United States)

2009-08-01

The companion guidebook (0-5485-P2) developed as part of this study provides the procedures and : methodologies for effective use of historical incident data at Texas Transportation Management Centers : (TMCs). This research report documents the resu...

Comprehensive low-cost reliability centered maintenance. Final report

International Nuclear Information System (INIS)

Rotton, S.J.; Dozier, I.J.; Thow, R.

1995-09-01

Reliability Centered Maintenance (RCM) is a maintenance optimization approach that all electric utilities can apply to power plant systems. The Electric Power Research Institute and PECO Energy Company jointly sponsored this Comprehensive Low-Cost Reliability Centered Maintenance project to demonstrate that the standard RCM methodology could be streamlined to reduce the cost of analysis while maintaining a high quality product. EPRI's previous investigation of streamlined RCM methods being pioneered in the nuclear industry indicated that PECO Energy could expect to optimize its maintenance program at reduced cost by carefully controlling the scope without sacrificing documentation or technical quality. Using the insights obtained from these previous studies, three methods were defined in this project and were demonstrated in a large scale application to 60 systems at both the Limerick Generating Station and the Peach Bottom Atomic Power Station

THEORETIC AND METHODOLOGIC BASICS OF DEVELOPMENT OF THE NATIONAL LOGISTICS SYSTEM IN THE REPUBLIC OF BELARUS

Directory of Open Access Journals (Sweden)

R. B. Ivut

2016-01-01

Full Text Available The article presents the results of a study, the aim of which is the formation of the theoretical and methodological foundations in the framework of scientific maintenance for the further development processes of the national logistics system in the Republic of Belarus. The relevance of the study relates to the fact that at present the introduction of the concept of logistics and the formation of the optimal infrastructure for its implementation are the key factors for economic development of Belarus as a transit country. At the same time the pace of development of the logistic activities in the country is currently slightly lower in comparison with the neighboring countries, as evidenced by the dynamics of the country’s position in international rankings (in particular, according to the LPI index. Overcoming these gaps requires improved competitiveness of the logistics infrastructure in the international market. This, in turn, is possible due to the clear formulation and adherence of the effective functioning principles for macro logistics system of Belarus, as well as by increasing the quality of logistics design by means of applying econometric models and methods presented in the article. The proposed auctorial approach is the differentiation of the general principles of logistics specific to the logistics systems of all levels, and the specific principles of development of the macro level logistics system related to improving its transit attractiveness for international freight carriers. The study also systematizes the model for determining the optimal location of logistics facilities. Particular attention is paid to the methodological basis of the analysis of transport terminals functioning as part of the logistics centers both in the stages of design and operation. The developed theoretical and methodological recommendations are universal and can be used in the design of the logistics infrastructure for various purposes and functions

Gulf Coast Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Dillingham, Gavin [Houston Advanced Research Center, TX (United States)

2013-09-30

The Gulf Coast Clean Energy Application Center was initiated to significantly improve market and regulatory conditions for the implementation of combined heat and power technologies. The GC CEAC was responsible for the development of CHP in Texas, Louisiana and Oklahoma. Through this program we employed a variety of outreach and education techniques, developed and deployed assessment tools and conducted market assessments. These efforts resulted in the growth of the combined heat and power market in the Gulf Coast region with a realization of more efficient energy generation, reduced emissions and a more resilient infrastructure. Specific t research, we did not formally investigate any techniques with any formal research design or methodology.

Monitoring the multi-faceted problem of youth violence: the Asian/Pacific Islander Youth Violence Prevention Center's surveillance system.

Science.gov (United States)

Sugimoto-Matsuda, Jeanelle J; Hishinuma, Earl S; Momohara, Christie-Brianna K; Rehuher, Davis; Soli, Fa'apisa M; Bautista, Randy Paul M; Chang, Janice Y

2012-10-01

Youth violence (YV) is a complex public health issue that spans geographic, ethnic, and socioeconomic lines. The Asian/Pacific Islander Youth Violence Prevention Center conducts qualitative and quantitative research on YV in Hawai'i. A critical element in YV prevention involves measuring YV and its risk-protective factors to determine the scope of the problem and to monitor changes across time. Under the Asian/Pacific Islander Youth Violence Prevention Center's (APIYVPC's) surveillance umbrella, a variety of methodologies are utilized. The major forms of active surveillance are a School-Wide Survey for youth, and a Safe Community Household Survey for adults. A variety of secondary data sources are accessed, such as the Centers for Disease Control and Prevention (Youth Risk Behavior Surveillance System), the Hawai'i State Department of the Attorney General, the Hawai'i State Department of Education, and the Hawai'i State Department of Health. State data are especially important for the Center, because most of these sources disaggregate ethnicity data for Asian Americans/Pacific Islanders. This paper details the surveillance methodologies utilized by the APIYVPC to monitor YV in one specific community and in Hawai'i, in comparison to the rest of the State and nation. Empirical results demonstrate the utility of each methodology and how they complement one another. Individually, each data source lends valuable information to the field of YV prevention; however, collectively, the APIYVPC's surveillance methods help to paint a more complete picture regarding violence rates and the relationship between YV and its risk-protective factors, particularly for minority communities.

A social work study on the effect of family life education on marital satisfaction of women attending in Isfahan Counseling Centers

OpenAIRE

Ali Asghar Rahimi Rezaee; Karim Afshari Neia; Mokhtar Ariri

2013-01-01

This paper studies the effective of family life education (FLE) on marital status among women attending in Isfahan counseling centers. The methodology of this research was quasi experimental with pre-test and post-test design and control group. Statistical populations were women attending in Isfahan city counseling centers. For selecting statistical sample, 30 women from women attending in counseling centers were selected as volunteers and randomly distributed between experimental and control...

Reliability Centered Maintenance (RCM) Methodology and Application to the Shutdown Cooling System for APR-1400 Reactors

Energy Technology Data Exchange (ETDEWEB)

Faragalla, Mohamed M.; Emmanuel, Efenji; Alhammadi, Ibrahim; Awwal, Arigi M.; Lee, Yong Kwan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2016-10-15

Shutdown Cooling System (SCS) is a safety-related system that is used in conjunction with the Main Steam and Main or Auxiliary Feedwater Systems to reduce the temperature of the Reactor Coolant System (RCS) in post shutdown periods from the hot shutdown operating temperature to the refueling temperature. In this paper RCM methodology is applied to (SCS). RCM analysis is performed based on evaluation of Failure Modes Effects and Criticality Analysis (FME and CA) on the component, system and plant. The Logic Tree Analysis (LTA) is used to determine the optimum maintenance tasks. The main objectives of RCM is the safety, preserve the System function, the cost-effective maintenance of the plant components and increase the reliability and availability value. The RCM methodology is useful for improving the equipment reliability by strengthening the management of equipment condition, and leads to a significant decrease in the number of periodical maintenance, extended maintenance cycle, longer useful life of equipment, and decrease in overall maintenance cost. It also focuses on the safety of the system by assigning criticality index to the various components and further selecting maintenance activities based on the risk of failure involved. Therefore, it can be said that RCM introduces a maintenance plan designed for maximum safety in an economical manner and making the system more reliable. For the SCP, increasing the number of condition monitoring tasks will improve the availability of the SCP. It is recommended to reduce the number of periodic maintenance activities.

Otomatisasi Sistem Antrean Menggunakan Fast Methodology: Studi Kasus Student Advisory Universitas Bina Nusantara

Directory of Open Access Journals (Sweden)

Eileen Heriyanni

2014-12-01

Full Text Available If there is a stack in a service center, then the customers need to form a queue. There are increasing number of consultations in a specific time at Student Advisory Center (SAC Bina Nusantara University. The increased needs for consultation lead to high waiting time that must be passed by the students who need the service. Therefore an information system queue is required to replace the current manual queue process. This study aims to create an automation using six stages FAST Methodology which includes Scope Definition, Problem Analysis, Requirement Analysis, Logical Design, Decision Analysis, Physical Design and Integration. The results of this research is the design of the application queue screen can be applied to SAC Bina Nusantara University.

Professionals calling in lifelong learning centers

Directory of Open Access Journals (Sweden)

Victor Manuel Monteiro Seco

2013-06-01

Full Text Available Purpose: This study aims to understand how the way people see their work and the authentizotic character of their organizational climate contribute to the building of a Great Place to Work. Design/methodology/approach: This paper presents the results of a quantitative investigation that correlate the perceptions of organizational climate and the work orientations of professionals with different occupations on Portuguese lifelong education centers. Findings: The study indicates that all the core elements of an authentizotic organization contribute to explain what people potentially expect from their companies:  adequate  material  conditions  plus  a  meaningful contribution. Practical implications: The study has implications in the future for National Qualification Agency directors, education politicians and human resource managers who are responsible for providing good expectations within a healthy context of talent retention. Originality/value: The novel contribution of this paper is the finding that employee’s work orientations and authentizotic climate are related to each other in a Lifelong learning Center in the public education sector.

Assessment of the Patient-Centered and Family-Centered Care Experience of Total Joint Replacement Patients Using a Shadowing Technique.

Science.gov (United States)

Marcus-Aiyeku, Ulanda; DeBari, Margaret; Salmond, Susan

2015-01-01

In 2030, when baby boomers reach 65 years of age and represent 18% of the population, it is anticipated that 67 million adults will have a diagnosis of arthritis increasing the demand for total hip and knee arthroplasty. With the growing emphasis on patient- and family-centered care, the aim of this project was to assess the patient experience of patients and families throughout the entire spectrum of the total joint replacement service line care at a university regional trauma hospital. A shadowing methodology as defined by the Institute for Health Improvement was utilized. Eight patient/family groups undergoing total joint replacements were shadowed. The mapped care experience included time, caregiver, activity, shadower observations, and impressions. Findings revealed inconsistencies in the delivery of patient- and family-centered care. Communication and interactions were predominantly provider-centric, with a focus on care routines versus the patient and family, and anticipation that care would be medically directed.

Evaluation of speech errors in Putonghua speakers with cleft palate: a critical review of methodology issues.

Science.gov (United States)

Jiang, Chenghui; Whitehill, Tara L

2014-04-01

Speech errors associated with cleft palate are well established for English and several other Indo-European languages. Few articles describing the speech of Putonghua (standard Mandarin Chinese) speakers with cleft palate have been published in English language journals. Although methodological guidelines have been published for the perceptual speech evaluation of individuals with cleft palate, there has been no critical review of methodological issues in studies of Putonghua speakers with cleft palate. A literature search was conducted to identify relevant studies published over the past 30 years in Chinese language journals. Only studies incorporating perceptual analysis of speech were included. Thirty-seven articles which met inclusion criteria were analyzed and coded on a number of methodological variables. Reliability was established by having all variables recoded for all studies. This critical review identified many methodological issues. These design flaws make it difficult to draw reliable conclusions about characteristic speech errors in this group of speakers. Specific recommendations are made to improve the reliability and validity of future studies, as well to facilitate cross-center comparisons.

Methodological reporting of randomized controlled trials in major hepato-gastroenterology journals in 2008 and 1998: a comparative study

Science.gov (United States)

2011-01-01

Background It was still unclear whether the methodological reporting quality of randomized controlled trials (RCTs) in major hepato-gastroenterology journals improved after the Consolidated Standards of Reporting Trials (CONSORT) Statement was revised in 2001. Methods RCTs in five major hepato-gastroenterology journals published in 1998 or 2008 were retrieved from MEDLINE using a high sensitivity search method and their reporting quality of methodological details were evaluated based on the CONSORT Statement and Cochrane Handbook for Systematic Reviews of interventions. Changes of the methodological reporting quality between 2008 and 1998 were calculated by risk ratios with 95% confidence intervals. Results A total of 107 RCTs published in 2008 and 99 RCTs published in 1998 were found. Compared to those in 1998, the proportion of RCTs that reported sequence generation (RR, 5.70; 95%CI 3.11-10.42), allocation concealment (RR, 4.08; 95%CI 2.25-7.39), sample size calculation (RR, 3.83; 95%CI 2.10-6.98), incomplete outecome data addressed (RR, 1.81; 95%CI, 1.03-3.17), intention-to-treat analyses (RR, 3.04; 95%CI 1.72-5.39) increased in 2008. Blinding and intent-to-treat analysis were reported better in multi-center trials than in single-center trials. The reporting of allocation concealment and blinding were better in industry-sponsored trials than in public-funded trials. Compared with historical studies, the methodological reporting quality improved with time. Conclusion Although the reporting of several important methodological aspects improved in 2008 compared with those published in 1998, which may indicate the researchers had increased awareness of and compliance with the revised CONSORT statement, some items were still reported badly. There is much room for future improvement. PMID:21801429

A Multi-Center Diabetes Eye Screening Study in Community Settings: Study Design and Methodology.

Science.gov (United States)

Murchison, Ann P; Friedman, David S; Gower, Emily W; Haller, Julia A; Lam, Byron L; Lee, David J; McGwin, Gerald; Owsley, Cynthia; Saaddine, Jinan; Insight Study Group

2016-01-01

Diabetes is the leading cause of new cases of blindness among adults aged 20-74 years within the United States. The Innovative Network for Sight Research group (INSIGHT) designed the Diabetic Eye Screening Study (DESS) to examine the feasibility and short-term effectiveness of non-mydriatic diabetic retinopathy (DR) screening for adults with diabetes in community-based settings. Study enrollment began in December 2011 at four sites: an internal medicine clinic at a county hospital in Birmingham, Alabama; a Federally-qualified community healthcare center in Miami-Dade County, Florida; a university-affiliated outpatient pharmacy in Philadelphia, Pennsylvania; and a medical home in Winston-Salem, North Carolina. People 18 years or older with previously diagnosed diabetes were offered free DR screening using non-mydriatic retinal photography that was preceded by a brief questionnaire addressing demographic information and previous eye care use. Visual acuity was also measured for each eye. Images were evaluated at a telemedicine reading center by trained evaluators using the National Health System DR grading classification. Participants and their physicians were sent screening report results and telephoned for a follow-up survey 3 months post-screening to determine whether participants had sought follow-up comprehensive eye care and their experiences with the screening process. Target enrollment at each site was a minimum of 500 persons. Three of the four sites met this enrollment goal. The INSIGHT/DESS is intended to establish the feasibility and short-term effectiveness of DR screening using non-mydriatic retinal photography in persons with diabetes who seek services in community-based clinic and pharmacy settings.

Development of an Out-Year Planning Document for MPC and A Work at the RMTC as a Base for Future Center Activity and Sustainability

International Nuclear Information System (INIS)

Ryazanov, Boris; Goryunov, Victor; Shapsha, V.; Crawford, Cary E.

2007-01-01

The Material Protection Control and Accounting (MPC and A) Program has been working for several years with the Russian Methodological and Training Center (RMTC) to implement training and methodological support programs related to Material Control and Accounting (MC and A). This cooperation will continue throughout the next few years, as courses are updated/maintained, methodological support provided, and an MC and A equipment-testing center established. As this work continues, it is important that not only are the near-term, easily identifiable activities conducted, but also the long-range vision is considered and appropriate plans are prepared to ensure that the work is being addressed in the proper priority. In addition, it is also important that the RMTC understands and identifies the necessary resources to complete the work.

FORMATION OF TEACHERS-TUTOR ICT COMPETENCE OF DISTANCE EDUCATION RESOURCE CENTER

Directory of Open Access Journals (Sweden)

Olga E. Konevchshynska

2014-09-01

Full Text Available The paper analyzes the main approaches to the definition of ICT competence of professionals who provide training and methodological support of distance learning. There is highlighted the level of scientific development of the problem, identified and proved the essence of teacher’s ICT competence, overviewed the international and domestic experience of teacher training in the the sphere of information technologies. It is indicated that one of the main tasks of resource centers for distance education is the provision of an appropriate level of qualification of teacher-tutor working in a network of resource centers. Also it is pointed out the levels of ICT competencies necessary for successful professional activity of network teachers.

Managing the risks of on-site health centers.

Science.gov (United States)

Gorman, Kathleen M; Miller, Ross M

2011-11-01

This review sought to assess compliance concerns, determine risk management strategies, and identify opportunities for future research to contribute to employers' understanding of the laws and regulations that apply to on-site care. A comprehensive review of databases, professional organizations' websites, and journals resulted in 22 publications reporting on the consequences of noncompliance among on-site health centers accepted for inclusion. None of those studies reported a study design or quantifiable outcome data. Two noncompliance themes were repeated among the publications. First, direct penalties included fines, civil actions, loss of licensure, and, potentially, criminal charges. Second, noncompliance also resulted in indirect costs such as employee mistrust and lowered standards of care, which jeopardize on-site health centers' ability to demonstrate a return on investment. Further research with rigorous methodology is needed to inform employer decisions about on-site health services and associated risk management. Copyright 2011, SLACK Incorporated.

A Method for Estimating Potential Energy and Cost Savings for Cooling Existing Data Centers

Energy Technology Data Exchange (ETDEWEB)

Van Geet, Otto

2017-04-24

NREL has developed a methodology to prioritize which data center cooling systems could be upgraded for better efficiency based on estimated cost savings and economics. The best efficiency results are in cool or dry climates where 'free' economizer or evaporative cooling can provide most of the data center cooling. Locations with a high cost of energy and facilities with high power usage effectiveness (PUE) are also good candidates for data center cooling system upgrades. In one case study of a major cable provider's data centers, most of the sites studied had opportunities for cost-effective cooling system upgrades with payback period of 5 years or less. If the cable provider invested in all opportunities for upgrades with payback periods of less than 15 years, it could save 27% on annual energy costs.

Proposals for implementation of methodological aspects in the use of 18F-FDG in the Positron Emission Tomography

International Nuclear Information System (INIS)

Oliveira, Cássio Miri

2013-01-01

This work covered three objectives: to evaluate and implement methods for in vivo internal occupational monitoring of individuals involved during the 18 F-FDG process production; to suggest a national Diagnostic Reference Level (DRL) for 18 F-FDGPET oncologic procedures; and to obtain the 'Recovery Coefficients' (RCs) factors used to correct the radiopharmaceutical uptake in region of interest for a better quantification and evaluation of images. The methodology of internal monitoring was implemented in the radiopharmaceuticals production centers of Nuclear Technology Development Center (CDTN) in Belo Horizonte - MG and the Nuclear Science Regional Center, North-East (CRCN-NE) in Recife, PE, Brazil. The results demonstrated that the developed methodology was efficient to evaluate 18 F-FDG incorporations in both centers; additionally, the methodology showed that there was possibility of 18 F incorporation in the form of 18 F-FDG during non-routine actions performed in the radiopharmaceutical production process. DRLs were suggested based on a questionnaire that was used for the survey of 18 F-FDG administered activity in 72 Brazilian clinics currently licensed by the National Nuclear Energy Commission (CNEN). The results reported by 41 (57%) of the 18 F-FDG-PET clinics showed variations up to 100% in the administered activities among clinics for the same procedure. The calculated DRL from the third quartile was 5.54 MBq/kg or 387.7 MBq (for a 70 kg standard patient). For image analysis, two phantoms were used for obtaining the RCs, the NEMA/IEC Body Phantom, which has spherical capture areas and the modified Jaszczak, which has cylindrical capitation capture areas. Both phantoms were tested for different lesion:BG activity ratios, in the amount of 4:1 and 10:1; for different acquisition time. RCs obtained according to NEMA and IEC standards were applied to the SUVmax and SUVmed semi quantification tools. Values of SUVmed corrected by RCs presented

Situating methodology within qualitative research.

Science.gov (United States)

Kramer-Kile, Marnie L

2012-01-01

Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

Methodology of sustainability accounting

Directory of Open Access Journals (Sweden)

O.H. Sokil

2017-03-01

Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

Comparison Of Irms Delhi Methodology With Who Methodology On Immunization Coverage

Directory of Open Access Journals (Sweden)

Singh Padam

1996-01-01

Full Text Available Research question: What are the merits of IRMS Model over WHO Model for Coverage Evaluation Survey? Which method is superior and appropriate for coverage evolution survey of immunization in our setting? Objective: To compare IRMS Delhi methodology with WHO methodology on Immunization Coverage. Study Design: Cross-Sectional Setting: Urban and Rural both. Participants: Mothers& Children Sample Size: 300 children between 1-2 years and 300 mothers in rural areas and 75 children and 75 mothers in urban areas. Study Variables: Rural, Urban, Cast-Group, Size of the stratum, Literacy, Sex and Cost effectiveness. Outcome Variables: Coverage level of immunization. Analysis: Routine Statistical Analysis. Results: IRMS developed methodology scores better rating over WHO methodology, especially when coverage evolution is attempted in medium size villages with existence of socio-economic seggregation-which remains the main characteristic of the Indian villages.

Application of Haddon’s matrix in qualitative research methodology: an experience in burns epidemiology

Directory of Open Access Journals (Sweden)

Deljavan R

2012-07-01

Full Text Available Reza Deljavan,1 Homayoun Sadeghi-Bazarganim,2,3 Nasrin Fouladim,4 Shahnam Arshi,5 Reza Mohammadi61Injury Epidemiology and Prevention Research Center, 2Neuroscience Research Center, Department of Statistics and Epidemiology, Tabriz University of Medical Sciences, Tabriz, Iran; 3Public Health Department, Karolinska Institute, Stockholm, Sweden; 4Ardabil University of Medical Sciences, Ardabil, Iran; 5Shahid Beheshti University of Medical Sciences, Tehran, Iran; 6Public Health Department, Karolinska Institute, Stockholm, SwedenBackground: Little has been done to investigate the application of injury specific qualitative research methods in the field of burn injuries. The aim of this study was to use an analytical tool (Haddon’s matrix through qualitative research methods to better understand people’s perceptions about burn injuries.Methods: This study applied Haddon’s matrix as a framework and an analytical tool for a qualitative research methodology in burn research. Both child and adult burn injury victims were enrolled into a qualitative study conducted using focus group discussion. Haddon’s matrix was used to develop an interview guide and also through the analysis phase.Results: The main analysis clusters were pre-event level/human (including risky behaviors, belief and cultural factors, and knowledge and education, pre-event level/object, pre-event phase/environment and event and post-event phase (including fire control, emergency scald and burn wound management, traditional remedies, medical consultation, and severity indicators. This research gave rise to results that are possibly useful both for future injury research and for designing burn injury prevention plans.Conclusion: Haddon’s matrix is applicable in a qualitative research methodology both at data collection and data analysis phases. The study using Haddon’s matrix through a qualitative research methodology yielded substantially rich information regarding burn injuries

Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

International Nuclear Information System (INIS)

Ritzman, R.L.; Husseiny, A.A.

1980-08-01

The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

Caracterização morfológica de frutos, sementes e germinação de Sideroxylon obtusifolium (Roem. e Schult. Penn. (Sapotaceae

Directory of Open Access Journals (Sweden)

Kelina Bernardo Silva

2012-02-01

Full Text Available Estudos que visam ao conhecimento da morfologia de sementes e plântulas contribuem para a identificação das espécies, facilitando o reconhecimento das fases iniciais do seu desenvolvimento. Assim, os objetivos deste trabalho foram caracterizar morfologicamente as estruturas externa e interna dos frutos e das sementes de Sideroxylon obtusifolium (Roem. e Schult. Penn., além de descrever e ilustrar a morfologia externa da plântula. Para a descrição dos frutos foram observados detalhes externos e internos do pericarpo, referentes a textura, consistência, cor, pilosidade, brilho, forma, número de sementes por fruto e deiscência. Foram analisadas as seguintes variáveis externas das sementes: dimensões, cor, textura, consistência, forma e posição do hilo e da micrópila; e as internas: presença ou ausência de endosperma, tipo, forma, cor, posição dos cotilédones, eixo-hipocótilo-radícula e plúmula. A germinação foi considerada desde o intumescimento da semente até a emissão dos protófilos, sendo a plântula considerada estabelecida quando os protófilos já estavam totalmente expandidos. Os frutos de S. obtusifolium são dos tipos bacoide, globoso ou elipsoide, indeiscente e monospérmico. As sementes variam de globosas a elipsoides, e o embrião é do tipo cotiledonar e ocupa posição basal na semente. A germinação tem início no décimo segundo dia e pode ser encerrada no vigésimo primeiro dia após a semeadura.

Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation

DEFF Research Database (Denmark)

already spent on these technologies also lead to commercial success. The project ‘Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation’ was aiming at starting with the Establishment of such a center. The following report documents the achievements within the project...... of the fluctuating wind energy. As the fuel cell and hydrogen technologies come closer to commercialization, development of testing methodology, qualified testing and demonstration become increasingly important. Danish industrial players have expressed a strong need for support in the process to push fuel cell...... and hydrogen technologies from the research and development stage into the commercial domain. A Center to support industry with test, development, analysis, approval, certification, consultation, and training in the areas of fuel cell and hydrogen technologies was needed. Denmark has demonstrated leading...

Kaupapa Maori Methodology: Trusting the Methodology through Thick and Thin

Science.gov (United States)

Hiha, Anne Aroha

2016-01-01

Kaupapa Maori is thoroughly theorised in academia in Aotearoa and those wishing to use it as their research methodology can find support through the writing of a number of Maori academics. What is not so well articulated, is the experiential voice of those who have used Kaupapa Maori as research methodology. My identity as a Maori woman…

Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management

International Nuclear Information System (INIS)

Del Ciello, R.; Napoleoni, S.

1998-01-01

This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies [it

Molecular, ultrastructural, and biological characterization of Pennsylvania isolates of Plum pox virus.

Science.gov (United States)

Schneider, William L; Damsteegt, Vernon D; Gildow, Fred E; Stone, Andrew L; Sherman, Diana J; Levy, Laurene E; Mavrodieva, Vessela; Richwine, Nancy; Welliver, Ruth; Luster, Douglas G

2011-05-01

Plum pox virus (PPV) was identified in Pennsylvania in 1999. The outbreak was limited to a four-county region in southern Pennsylvania. Initial serological and molecular characterization indicated that the isolates in Pennsylvania belong to the D strain of PPV. The Pennsylvania isolates were characterized by sequence analysis, electron microscopy, host range, and vector transmission to determine how these isolates related to their previously studied European counterparts. Genetically, Pennsylvania (PPV-Penn) isolates were more closely related to each other than to any other PPV-D strains, and isolates from the United States, Canada, and Chile were more closely related to each other than to European isolates. The PPV-Penn isolates exist as two clades, suggesting the possibility of multiple introductions. Electron microscopy analysis of PPV-Penn isolates, including cytopathological studies, indicated that the virions were similar to other Potyvirus spp. PPV-Penn isolates had a herbaceous host range similar to that of European D isolates. There were distinct differences in the transmission efficiencies of the two PPV-Penn isolates using Myzus persicae and Aphis spiraecola as vectors; however, both PPV-Penn isolates were transmitted by M. persicae more efficiently than a European D isolate but less efficiently than a European M isolate.

Final Report: Northeastern Regional Center of the DOE's National Institute for Climatic Change Research

Energy Technology Data Exchange (ETDEWEB)

Davis, Kenneth

2014-01-14

Administration of the NERC of NICCR began at Penn State in December of 2005 and ended in December of 2011. During that time, five requests for proposals were released and five rounds of proposals were reviewed, awarded and administered. Throughout this award, 203 pre-proposals have been received by the NERC in five RFPS and 110 full proposals invited. Of the 110 full proposals reviewed, 53 were funded (most in full, some partially) resulting in 51 subcontracts. These awards were distributed among 17 universities and 3 non-governmental research institutes. Full proposals have been received from 29 universities and 5 non-governmental research institutes. Research activities have now been completed.

On methodology

DEFF Research Database (Denmark)

Cheesman, Robin; Faraone, Roque

2002-01-01

This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública".......This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública"....

Methodology for determination of activity of radionuclides by gamma spectrometry

International Nuclear Information System (INIS)

Fragoso, Maria da Conceicao de Farias; Oliveira, Victor Rogerio S. de; Oliveira, Mercia L.; Lima, Fernando Roberto de Andrade

2014-01-01

Due to the growth in the number of procedures that make use of the positron emission tomography (PET), there is a need for standard solutions for the calibration of the systems used for the measurement of the PET radiopharmaceutical (activimeter) in radiopharmacies and in nuclear medicine services. Among the existing alternatives for the standardization of radioactive sources, the method known as gamma spectrometry is widely used for short-lived radionuclides. The purpose of this study was to implement the methodology for standardization of the 18 F solutions by gamma spectrometry at the Regional Center for Nuclear Sciences of the Northeast (CRCN-NE/CNEN-NE), Brazil. (author)

R&D ENTITIES AND STRATEGIC TRACKING SYSTEMS: AN ANALYSIS OF THE METHODOLOGIES USED

Directory of Open Access Journals (Sweden)

Ricardo Lopes Cardoso

2010-04-01

Full Text Available This paper’s main purposes are to analyze the research centers strategic performance measurement system; to study what methodologies are more commonly used and to find out how measurement system and strategic goals are integrated. The sample consists of six research centers in Campinas – São Paulo and the theoretical backgrounds used are the strategic performance measurement systems like the Tableau de Bord, the Sink and Tuttle model and the Kaplan and Norton’s Balanced Scorecard. The research results were subject to qualitative analysis leading to the following considerations: research centers measure, assess and monitor their results with strategic drivers systems mainly through qualitative dimensions such as research, development and innovation, customer satisfaction – users and services and processes quality. Among the systems used, the specific ones prevail and half of them are conceptually linked with the Balanced Scorecard content. The final research results demonstrate great lack of integration between the strategic plans and the performance indicators as well as lack of integration between the performance indicators and the organization as a whole.

Human-centered design of the human-system interfaces of medical equipment: thyroid uptake system

International Nuclear Information System (INIS)

Monteiro, Jonathan K.R.; Farias, Marcos S.; Santos, Isaac J.A. Luquetti; Monteiro, Beany G.

2013-01-01

Technology plays an important role in modern medical centers, making healthcare increasingly complex, relying on complex technical equipment. This technical complexity is particularly noticeable in the nuclear medicine. Poorly design human-system interfaces can increase the risks for human error. The human-centered approach emphasizes the development of the equipment with a deep understanding of the users activities, current work practices, needs and abilities of the users. An important concept of human-centered design is that the ease-of-use of the equipment can be ensured only if users are actively incorporated in all phases of the life cycle of design process. Representative groups of users are exposed to the equipment at various stages in development, in a variety of testing, evaluation and interviewing situations. The users feedback obtained is then used to refine the design, with the result serving as input to the next interaction of design process. The limits of the approach are that the users cannot address any particular future needs without prior experience or knowledge about the equipment operation. The aim of this paper is to present a methodological framework that contributes to the design of the human-system interfaces, through an approach related to the users and their activities. A case study is described in which the methodological framework is being applied in development of new human-system interfaces of the thyroid uptake system. (author)

Location Model for Distribution Centers for Fulfilling Electronic Orders of Fresh Foods under Uncertain Demand

Directory of Open Access Journals (Sweden)

Hao Zhang

2017-01-01

Full Text Available The problem of locating distribution centers for delivering fresh food as a part of electronic commerce is a strategic decision problem for enterprises. This paper establishes a model for locating distribution centers that considers the uncertainty of customer demands for fresh goods in terms of time-sensitiveness and freshness. Based on the methodology of robust optimization in dealing with uncertain problems, this paper optimizes the location model in discrete demand probabilistic scenarios. In this paper, an improved fruit fly optimization algorithm is proposed to solve the distribution center location problem. An example is given to show that the proposed model and algorithm are robust and can effectively handle the complications caused by uncertain demand. The model proposed in this paper proves valuable both theoretically and practically in the selection of locations of distribution centers.

The use of spirometry in a primary care setting

OpenAIRE

Blain, Elizabeth A; Craig, Timothy J

2009-01-01

Elizabeth A Blain, Timothy J CraigPenn State Hershey Medical Center, Hershey, PA, USAObjective: To determine the use of spirometry in family practice, internal medicine, and pediatric outpatient settings.Methods: Data were collected from 45 outpatient offices in the central Pennsylvania area via phone survey that asked a set of four questions: 1) Do you have spirometry in your office? 2) Do you use spirometry for asthma patients? 3) In what situation do you use spirometry for? 4) Do you use s...

The Resident Academic Project Program: A Structured Approach to Inspiring Academic Development During Residency Training.

Science.gov (United States)

Eckert, Jill; Vaida, Sonia J; Bezinover, Dmitri; McCloskey, Diane E; Mets, Berend

2016-02-15

We report the successful implementation of structured resident academic projects in our Department of Anesthesiology at the Penn State Hershey Medical Center. Beginning with the graduating class of 2010, we adopted an expectation that each resident complete a project that results in a manuscript of publishable quality. Defining a clear timeline for all steps in the project and providing research education, as well as the necessary infrastructure and ongoing support, has helped grow the academic productivity of our anesthesia residents.

Switching from usual brand cigarettes to a tobacco-heating cigarette or snus: Part 1. Study design and methodology.

Science.gov (United States)

Ogden, Michael W; Marano, Kristin M; Jones, Bobbette A; Stiles, Mitchell F

2015-01-01

A randomized, multi-center study was conducted to assess potential improvement in health status measures, as well as changes in biomarkers of tobacco exposure and biomarkers of biological effect, in current adult cigarette smokers switched to tobacco-heating cigarettes, snus or ultra-low machine yield tobacco-burning cigarettes (50/group) evaluated over 24 weeks. Study design, conduct and methodology are presented here along with subjects' disposition, characteristics, compliance and safety results. This design and methodology, evaluating generally healthy adult smokers over a relatively short duration, proved feasible. Findings from this randomized study provide generalized knowledge of the risk continuum among various tobacco products (ClinicalTrials.gov Identifier: NCT02061917).

77 FR 26522 - Inland Waterways Users Board

Science.gov (United States)

2012-05-04

...: June 6, 2012. Location: The OMNI William Penn Hotel, 530 William Penn Place, Pittsburgh, PA 15219 at... budget, an update of the Inland Marine Transportation System (IMTS) Capital Projects Business Model...

Scrum methodology in banking environment

OpenAIRE

Strihová, Barbora

2015-01-01

Bachelor thesis "Scrum methodology in banking environment" is focused on one of agile methodologies called Scrum and description of the methodology used in banking environment. Its main goal is to introduce the Scrum methodology and outline a real project placed in a bank focused on software development through a case study, address problems of the project, propose solutions of the addressed problems and identify anomalies of Scrum in software development constrained by the banking environmen...

Mark my Words: The Design of an Innovative Methodology to Detect and Analyze Interpersonal Health Conversations in Web and Social Media

NARCIS (Netherlands)

Bouman, M.P.A.; Drossaert, Constance H.C.; Pieterse, Marcel E.

2012-01-01

Internet technology in which social media play a central role offers new opportunities for health communication. The Center for Media & Health (CMH) in the Netherlands in collaboration with the University of Twente developed a methodology called Mark My Words (MMW) to detect and monitor

Customer-centered careflow modeling based on guidelines.

Science.gov (United States)

Huang, Biqing; Zhu, Peng; Wu, Cheng

2012-10-01

In contemporary society, customer-centered health care, which stresses customer participation and long-term tailored care, is inevitably becoming a trend. Compared with the hospital or physician-centered healthcare process, the customer-centered healthcare process requires more knowledge and modeling such a process is extremely complex. Thus, building a care process model for a special customer is cost prohibitive. In addition, during the execution of a care process model, the information system should have flexibility to modify the model so that it adapts to changes in the healthcare process. Therefore, supporting the process in a flexible, cost-effective way is a key challenge for information technology. To meet this challenge, first, we analyze various kinds of knowledge used in process modeling, illustrate their characteristics, and detail their roles and effects in careflow modeling. Secondly, we propose a methodology to manage a lifecycle of the healthcare process modeling, with which models could be built gradually with convenience and efficiency. In this lifecycle, different levels of process models are established based on the kinds of knowledge involved, and the diffusion strategy of these process models is designed. Thirdly, architecture and prototype of the system supporting the process modeling and its lifecycle are given. This careflow system also considers the compatibility of legacy systems and authority problems. Finally, an example is provided to demonstrate implementation of the careflow system.

Methodology for Analyzing and Developing Information Management Infrastructure to Support Telerehabilitation

Directory of Open Access Journals (Sweden)

Andi Saptono

2009-09-01

Full Text Available The proliferation of advanced technologies led researchers within the Rehabilitation Engineering Research Center on Telerehabilitation (RERC-TR to devise an integrated infrastructure for clinical services using the University of Pittsburgh (PITT model. This model describes five required characteristics for a telerehabilitation (TR infrastructure: openness, extensibility, scalability, cost-effectiveness, and security. The infrastructure is to deliver clinical services over distance to improve access to health services for people living in underserved or remote areas. The methodological approach to design, develop, and employ this infrastructure is explained and detailed for the remote wheelchair prescription project, a research task within the RERC-TR. The availability of this specific clinical service and personnel outside of metropolitan areas is limited due to the lack of specialty expertise and access to resources. The infrastructure is used to deliver expertise in wheeled mobility and seating through teleconsultation to remote clinics, and has been successfully deployed to five rural clinics in Western Pennsylvania. Keywords: Telerehabilitation, Information Management, Infrastructure Development Methodology, Videoconferencing, Online Portal, Database

Factors associated with high stress levels in adults with diabetes mellitus attending a tertiary diabetes care center, Chennai, Tamil Nadu, India.

OpenAIRE

Sendhilkumar, M; Tripathy, JP; Harries, AD; Dongre, AR; Deepa, M; Vidyulatha, A; Poongothai, S; Venkatesan, U; Anjana, RM; Mohan, V

2017-01-01

Objective: We aimed to determine perceived stress levels among adults aged >20 years with type 2 diabetes mellitus (DM) in a tertiary care diabetes center, Chennai, Tamil Nadu, India, assess their association with sociodemographic and clinical characteristics and assess the possible risk factors for stress and coping strategies. Methods: A mixed-methods (triangulation design) study with quantitative methodology (survey) and qualitative methodology (interviews) was carried out. Stress levels w...

The Effect of Adding Comorbidities to Current Centers for Disease Control and Prevention Central-Line-Associated Bloodstream Infection Risk-Adjustment Methodology.

Science.gov (United States)

Jackson, Sarah S; Leekha, Surbhi; Magder, Laurence S; Pineles, Lisa; Anderson, Deverick J; Trick, William E; Woeltje, Keith F; Kaye, Keith S; Stafford, Kristen; Thom, Kerri; Lowe, Timothy J; Harris, Anthony D

2017-09-01

BACKGROUND Risk adjustment is needed to fairly compare central-line-associated bloodstream infection (CLABSI) rates between hospitals. Until 2017, the Centers for Disease Control and Prevention (CDC) methodology adjusted CLABSI rates only by type of intensive care unit (ICU). The 2017 CDC models also adjust for hospital size and medical school affiliation. We hypothesized that risk adjustment would be improved by including patient demographics and comorbidities from electronically available hospital discharge codes. METHODS Using a cohort design across 22 hospitals, we analyzed data from ICU patients admitted between January 2012 and December 2013. Demographics and International Classification of Diseases, Ninth Edition, Clinical Modification (ICD-9-CM) discharge codes were obtained for each patient, and CLABSIs were identified by trained infection preventionists. Models adjusting only for ICU type and for ICU type plus patient case mix were built and compared using discrimination and standardized infection ratio (SIR). Hospitals were ranked by SIR for each model to examine and compare the changes in rank. RESULTS Overall, 85,849 ICU patients were analyzed and 162 (0.2%) developed CLABSI. The significant variables added to the ICU model were coagulopathy, paralysis, renal failure, malnutrition, and age. The C statistics were 0.55 (95% CI, 0.51-0.59) for the ICU-type model and 0.64 (95% CI, 0.60-0.69) for the ICU-type plus patient case-mix model. When the hospitals were ranked by adjusted SIRs, 10 hospitals (45%) changed rank when comorbidity was added to the ICU-type model. CONCLUSIONS Our risk-adjustment model for CLABSI using electronically available comorbidities demonstrated better discrimination than did the CDC model. The CDC should strongly consider comorbidity-based risk adjustment to more accurately compare CLABSI rates across hospitals. Infect Control Hosp Epidemiol 2017;38:1019-1024.

Experimental Economics: Some Methodological Notes

OpenAIRE

Fiore, Annamaria

2009-01-01

The aim of this work is presenting in a self-contained paper some methodological aspects as they are received in the current experimental literature. The purpose has been to make a critical review of some very influential papers dealing with methodological issues. In other words, the idea is to have a single paper where people first approaching experimental economics can find summarised (some) of the most important methodological issues. In particular, the focus is on some methodological prac...

Proposal of methodology of tsunami accident sequence analysis induced by earthquake using DQFM methodology

International Nuclear Information System (INIS)

Muta, Hitoshi; Muramatsu, Ken

2017-01-01

Since the Fukushima-Daiichi nuclear power station accident, the Japanese regulatory body has improved and upgraded the regulation of nuclear power plants, and continuous effort is required to enhance risk management in the mid- to long term. Earthquakes and tsunamis are considered as the most important risks, and the establishment of probabilistic risk assessment (PRA) methodologies for these events is a major issue of current PRA. The Nuclear Regulation Authority (NRA) addressed the PRA methodology for tsunamis induced by earthquakes, which is one of the methodologies that should be enhanced step by step for the improvement and maturity of PRA techniques. The AESJ standard for the procedure of seismic PRA for nuclear power plants in 2015 provides the basic concept of the methodology; however, details of the application to the actual plant PRA model have not been sufficiently provided. This study proposes a detailed PRA methodology for tsunamis induced by earthquakes using the DQFM methodology, which contributes to improving the safety of nuclear power plants. Furthermore, this study also states the issues which need more research. (author)

Stern-Center Potsdam; Stern-Center Potsdam

Energy Technology Data Exchange (ETDEWEB)

Anon.

1999-07-01

The ''Stern-Center Potsdam'' is a star-shaped shopping mall in the city center. [German] Das Stern-Center in Potsdam bietet als Einkaufszentrum vor den Toren Berlins Platz fuer eine Vielzahl von Geschaeften. Die sternfoermige Gebaeudestruktur des Centers bildet den Mittelpunkt des Stadtviertels 'Am Stern'. (orig.)

Methodology, models and algorithms in thermographic diagnostics

CERN Document Server

Živčák, Jozef; Madarász, Ladislav; Rudas, Imre J

2013-01-01

This book presents  the methodology and techniques of  thermographic applications with focus primarily on medical thermography implemented for parametrizing the diagnostics of the human body. The first part of the book describes the basics of infrared thermography, the possibilities of thermographic diagnostics and the physical nature of thermography. The second half includes tools of intelligent engineering applied for the solving of selected applications and projects. Thermographic diagnostics was applied to problematics of paraplegia and tetraplegia and carpal tunnel syndrome (CTS). The results of the research activities were created with the cooperation of the four projects within the Ministry of Education, Science, Research and Sport of the Slovak Republic entitled Digital control of complex systems with two degrees of freedom, Progressive methods of education in the area of control and modeling of complex object oriented systems on aircraft turbocompressor engines, Center for research of control of te...

Development of Methodologies for the Estimation of Thermal Properties Associated with Aerospace Vehicles

Science.gov (United States)

Scott, Elaine P.

1996-01-01

A thermal stress analysis is an important aspect in the design of aerospace structures and vehicles such as the High Speed Civil Transport (HSCT) at the National Aeronautics and Space Administration Langley Research Center (NASA-LaRC). These structures are complex and are often composed of numerous components fabricated from a variety of different materials. The thermal loads on these structures induce temperature variations within the structure, which in turn result in the development of thermal stresses. Therefore, a thermal stress analysis requires knowledge of the temperature distributions within the structures which consequently necessitates the need for accurate knowledge of the thermal properties, boundary conditions and thermal interface conditions associated with the structural materials. The goal of this proposed multi-year research effort was to develop estimation methodologies for the determination of the thermal properties and interface conditions associated with aerospace vehicles. Specific objectives focused on the development and implementation of optimal experimental design strategies and methodologies for the estimation of thermal properties associated with simple composite and honeycomb structures. The strategy used in this multi-year research effort was to first develop methodologies for relatively simple systems and then systematically modify these methodologies to analyze complex structures. This can be thought of as a building block approach. This strategy was intended to promote maximum usability of the resulting estimation procedure by NASA-LARC researchers through the design of in-house experimentation procedures and through the use of an existing general purpose finite element software.

LOFT uncertainty-analysis methodology

International Nuclear Information System (INIS)

Lassahn, G.D.

1983-01-01

The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear-reactor-safety research program is described and compared with other methodologies established for performing uncertainty analyses

LOFT uncertainty-analysis methodology

International Nuclear Information System (INIS)

Lassahn, G.D.

1983-01-01

The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear reactor safety research program is described and compared with other methodologies established for performing uncertainty analyses

Relationships among measurements obtained by use of computed tomography and radiography and scores of cartilage microdamage in hip joints with moderate to severe joint laxity of adult dogs.

Science.gov (United States)

Lopez, Mandi J; Lewis, Brooke P; Swaab, Megan E; Markel, Mark D

2008-03-01

To evaluate correlations among measurements on radiographic and computed tomography (CT) images with articular cartilage microdamage in lax hip joints of dogs. 12 adult mixed-breed hounds. Pelvic CT and radiography were performed. Hip joints were harvested following euthanasia. Orthopedic Foundation for Animals (OFA) and PennHIP radiograph reports were obtained. Norberg angle (NA) and radiographic percentage femoral head coverage (RPC) were determined. Center-edge angle (CEA), horizontal toit externe angle (HTEA), ventral acetabular sector angle (VASA), dorsal acetabular sector angle (DASA), horizontal acetabular sector angle (HASA), acetabular index (AI), and CT percentage femoral head coverage (CPC) were measured on 2-dimensional CT images. Femoral head-acetabular shelf percentage was measured on sagittal 3-dimensional CT (SCT) and transverse 3-dimensional CT (TCT) images. Light microscopy was used to score joint cartilage. Relationships of OFA confirmation and PennHIP osteoarthritis scores with radiography, CT, and cartilage variables and relationships of cartilage scores with radiography and CT measurements were evaluated with Spearman rank correlations. Pearson correlation was used for relationships of distraction index (DI) with radiography, CT, and cartilage variables. Significant relationships included PennHIP osteoarthritis score with cartilage score, CEA, HTEA, DASA, AI, CPC, and TCT; OFA confirmation score with cartilage score, NA, RPC, CEA, HTEA, DASA, AI, CPC, and TCT; cartilage score with NA, RPC, CEA, HTEA, DASA, HASA, AI, and TCT; and DI with cartilage score, CEA, HTEA, DASA, HASA, AI, and CPC. CT appeared to be a valuable imaging modality for predicting cartilage microdamage in canine hip joints.

A new process-centered description tool to initiate meta-reporting methodology in healthcare - 7CARECAT™. Feasibility study in a post-anesthesia care unit.

Science.gov (United States)

Cottet, P; d'Hollander, A; Cahana, A; Van Gessel, E; Tassaux, D

2013-10-01

In the healthcare domain, different analytic tools focused on accidents appeared to be poorly adapted to sub-accidental issues. Improving local management and intra-institutional communication with simpler methods, allowing rapid and uncomplicated meta-reporting, could be an attractive alternative. A process-centered structure derived from the industrial domain - DEPOSE(E) - was selected and modified for its use in the healthcare domain. The seven exclusive meta-categories defined - Patient, Equipment, Process, Actor, Supplies, work Room and Organization- constitute 7CARECAT™. A collection of 536 "improvement" reports from a tertiary hospital Post anesthesia care unit (PACU) was used and four meta-categorization rules edited prior to the analysis. Both the relevance of the metacategories and of the rules were tested to build a meta-reporting methodology. The distribution of these categories was analyzed with a χ 2 test. Five hundred and ninety independent facts were collected out of the 536 reports. The frequencies of the categories are: Organization 44%, Actor 37%, Patient 11%, Process 3%, work Room 3%, Equipment 1% and Supplies 1%, with a p-value events voluntarily reported. This model represents a relevant tool to exchange meta-informations important for local and transversal communication in healthcare institutions. It could be used as a promising tool to improve quality and risk management. Copyright © 2013. Published by Elsevier SAS.

Transmission pricing: paradigms and methodologies

Energy Technology Data Exchange (ETDEWEB)

Shirmohammadi, Dariush [Pacific Gas and Electric Co., San Francisco, CA (United States); Vieira Filho, Xisto; Gorenstin, Boris [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Pereira, Mario V.P. [Power System Research, Rio de Janeiro, RJ (Brazil)

1994-12-31

In this paper we describe the principles of several paradigms and methodologies for pricing transmission services. The paper outlines some of the main characteristics of these paradigms and methodologies such as where they may be used for best results. Due to their popularity, power flow based MW-mile and short run marginal cost pricing methodologies will be covered in some detail. We conclude the paper with examples of the application of these two pricing methodologies for pricing transmission services in Brazil. (author) 25 refs., 2 tabs.

Feminist Methodologies and Engineering Education Research

Science.gov (United States)

Beddoes, Kacey

2013-01-01

This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

Joint Center Estimation Using Single-Frame Optimization: Part 1: Numerical Simulation.

Science.gov (United States)

Frick, Eric; Rahmatalla, Salam

2018-04-04

The biomechanical models used to refine and stabilize motion capture processes are almost invariably driven by joint center estimates, and any errors in joint center calculation carry over and can be compounded when calculating joint kinematics. Unfortunately, accurate determination of joint centers is a complex task, primarily due to measurements being contaminated by soft-tissue artifact (STA). This paper proposes a novel approach to joint center estimation implemented via sequential application of single-frame optimization (SFO). First, the method minimizes the variance of individual time frames’ joint center estimations via the developed variance minimization method to obtain accurate overall initial conditions. These initial conditions are used to stabilize an optimization-based linearization of human motion that determines a time-varying joint center estimation. In this manner, the complex and nonlinear behavior of human motion contaminated by STA can be captured as a continuous series of unique rigid-body realizations without requiring a complex analytical model to describe the behavior of STA. This article intends to offer proof of concept, and the presented method must be further developed before it can be reasonably applied to human motion. Numerical simulations were introduced to verify and substantiate the efficacy of the proposed methodology. When directly compared with a state-of-the-art inertial method, SFO reduced the error due to soft-tissue artifact in all cases by more than 45%. Instead of producing a single vector value to describe the joint center location during a motion capture trial as existing methods often do, the proposed method produced time-varying solutions that were highly correlated ( r > 0.82) with the true, time-varying joint center solution.

Joint Center Estimation Using Single-Frame Optimization: Part 1: Numerical Simulation

Directory of Open Access Journals (Sweden)

Eric Frick

2018-04-01

Full Text Available The biomechanical models used to refine and stabilize motion capture processes are almost invariably driven by joint center estimates, and any errors in joint center calculation carry over and can be compounded when calculating joint kinematics. Unfortunately, accurate determination of joint centers is a complex task, primarily due to measurements being contaminated by soft-tissue artifact (STA. This paper proposes a novel approach to joint center estimation implemented via sequential application of single-frame optimization (SFO. First, the method minimizes the variance of individual time frames’ joint center estimations via the developed variance minimization method to obtain accurate overall initial conditions. These initial conditions are used to stabilize an optimization-based linearization of human motion that determines a time-varying joint center estimation. In this manner, the complex and nonlinear behavior of human motion contaminated by STA can be captured as a continuous series of unique rigid-body realizations without requiring a complex analytical model to describe the behavior of STA. This article intends to offer proof of concept, and the presented method must be further developed before it can be reasonably applied to human motion. Numerical simulations were introduced to verify and substantiate the efficacy of the proposed methodology. When directly compared with a state-of-the-art inertial method, SFO reduced the error due to soft-tissue artifact in all cases by more than 45%. Instead of producing a single vector value to describe the joint center location during a motion capture trial as existing methods often do, the proposed method produced time-varying solutions that were highly correlated (r > 0.82 with the true, time-varying joint center solution.

Formalizing the ISDF Software Development Methodology

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2015-01-01

Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

SITE: a methodology for assessment of energy facility siting patterns. Regional studies program

International Nuclear Information System (INIS)

Frigerio, N.A.; Habegger, L.J.; King, R.F.; Hoover, L.J.; Clark, N.A.; Cobian, J.M.

1975-08-01

The timely development of the nation's energy production capacity in a manner that minimizes potential adverse local and regional impacts associated with energy facilities requires the use of sophisticated techniques for evaluation of siting alternatives and fuel cycle options. This report is a documentation of the computerized SITE methodology that has been developed for evaluating health, environmental, and socioeconomic impacts related to utilization of alternate sites for energy production within a region of interest. The cost, impact, and attribute vectors, which are generated and displayed on density maps, can be used in a multiparameter overlay process to identify preferable siting areas. The assessment of clustered facilities in energy centers is also possible within the SITE analysis framework. An application of the SITE methodology to Northern Illinois is presented. Also included is a description of the ongoing extension of SITE for the accumulative evaluation of alternative regional energy siting patterns and fuel cycle options. An appendix provides documentation and user information for the SITE computer program

STATE INSPECTION METHODOLOGY OF ENVIRONMENTAL REGULATORY ACTIVITY FOCUSED ON THE LIFE CYCLE PROCESSESES

Directory of Open Access Journals (Sweden)

Yuniey Quiala Armenteros

2016-10-01

Full Text Available The Cuban Environmental Regulatory Activity has on the Environmental State Inspection an instrument for control and monitoring of compliance of current legal standards regarding environmental protection and rational use of natural resources. In this research, a design methodology for effective implementation of environmental regulatory activity in Cuba directed to processes is proposed; based on the life cycle assessment and the applicable environmental management standards, including new performance indicators, which form a new tool based on scientific criterions for the Center of Environmental Inspection and Control.

Lean Methodology Reduces Inappropriate Use of Antipsychotics for Agitation at a Psychiatric Hospital.

Science.gov (United States)

Goga, Joshana K; Depaolo, Antonio; Khushalani, Sunil; Walters, J Ken; Roca, Robert; Zisselman, Marc; Borleis, Christopher

2017-01-01

To Evaluate the Effects of Applying Lean Methodology-Improving Quality Increasing Efficiency by Eliminating Waste and Reducing Costs-An Approach To Decrease the Prescribing Frequency of Antipsychotics for The Indication of Agitation. Historically Controlled Study. Bheppard Pratt Health System is the Largest Private Provider of Psychiatric Care in Maryland With a Total Bed Capacity of 300. There Were 4 337 Patient Days From November 1 2012 to October 31 2013 on the Dementia Unit. All Patients Admitted on the Dementia Unit Were 65 Years of Age and Older with a Primary Diagnosis of Dementia. our Multidisciplinary Team Used Lean Methodology to Identify the Root Causes and Interventions Necessary to Reduce Inappropriate Antipsychotic Use. The Primary Outcome Was Rate of Inappropriately Indicating Agitation as the Rationale When Prescribing Antipsychotic Medications. There Was a 90% (P Agitation. The Lean Methodology Interventions Led To A 90% (P Agitation and a 10% Rate Reduction in Overall Antipsychotic Prescribing. Key Words: Agitation Alzheimer's Antipsychotics Behavioral and Psychological Symptoms of Dementia Centers For Medicare & Medicaid Services Dementia Root-cause Analysis. BPSD = Behavioral and Psychological Symptoms of Dementia CATIE-AD = Clinical Antipsychotic Trials of Intervention Effectiveness in Alzheimer's Disease EMR = Electronic Medical Records GAO = Government Accountability Office GNCIS = Geriatric Neuropsychiatric Clinical Indicator Scale.

Environmental impact statement analysis: dose methodology

International Nuclear Information System (INIS)

Mueller, M.A.; Strenge, D.L.; Napier, B.A.

1981-01-01

Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

Regional Shelter Analysis Methodology

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dennison, Deborah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Miller, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-08-01

The fallout from a nuclear explosion has the potential to injure or kill 100,000 or more people through exposure to external gamma (fallout) radiation. Existing buildings can reduce radiation exposure by placing material between fallout particles and exposed people. Lawrence Livermore National Laboratory was tasked with developing an operationally feasible methodology that could improve fallout casualty estimates. The methodology, called a Regional Shelter Analysis, combines the fallout protection that existing buildings provide civilian populations with the distribution of people in various locations. The Regional Shelter Analysis method allows the consideration of (a) multiple building types and locations within buildings, (b) country specific estimates, (c) population posture (e.g., unwarned vs. minimally warned), and (d) the time of day (e.g., night vs. day). The protection estimates can be combined with fallout predictions (or measurements) to (a) provide a more accurate assessment of exposure and injury and (b) evaluate the effectiveness of various casualty mitigation strategies. This report describes the Regional Shelter Analysis methodology, highlights key operational aspects (including demonstrating that the methodology is compatible with current tools), illustrates how to implement the methodology, and provides suggestions for future work.

Information sharing guidebook for transportation management centers, emergency operations centers, and fusion centers

Science.gov (United States)

2010-06-01

This guidebook provides an overview of the mission and functions of transportation management centers, emergency operations centers, and fusion centers. The guidebook focuses on the types of information these centers produce and manage and how the sh...

Information sharing guidebook for transportation management centers, emergency operations centers, and fusion centers.

Science.gov (United States)

2010-06-01

This guidebook provides an overview of the mission and functions of transportation management centers, emergency operations centers, and fusion centers. The guidebook focuses on the types of information these centers produce and manage and how the sh...

Penn State Worry Questionnaire

DEFF Research Database (Denmark)

Esbjørn, Barbara Hoff; Reinholdt-Dunne, Marie Louise; Caspersen, Ida Dyhr

2013-01-01

Anxiety disorders are among the most prevalent psychiatric disturbances in childhood. Nonetheless, they often go unrecognized and untreated, which puts the child at risk for developing additional difficulties, such as academic difficulties, depression, and substance abuse. Further knowledge......¿=¿30) treated with cognitive behavioral therapy. Results from the community sample replicated previous findings supporting the strong psychometric properties of the PSWQ-C, and yielded Danish norms and clinical cut-offs for the measure. Clinically anxious children with a generalized anxiety disorder...

Methodological adequacy of articles published in two open-access Brazilian cardiology periodicals.

Science.gov (United States)

Macedo, Cristiane Rufino; Silva, Davi Leite da; Puga, Maria Eduarda

2010-01-01

The use of rigorous scientific methods has contributed towards developing scientific articles of excellent methodological quality. This has made it possible to promote their citation and increase the impact factor. Brazilian periodicals have had to adapt to certain quality standards demanded by these indexing organizations, such as the content and the number of original articles published in each issue. This study aimed to evaluate the methodological adequacy of two Brazilian periodicals within the field of cardiology that are indexed in several databases and freely accessible through the Scientific Electronic Library Online (SciELO), and which are now indexed by the Web of Science (Institute for Scientific Information, ISI). Descriptive study at Brazilian Cochrane Center. All the published articles were evaluated according to merit assessment (content) and form assessment (performance). Ninety-six percent of the articles analyzed presented study designs that were adequate for answering the objectives. These two Brazilian periodicals within the field of cardiology published methodologically adequate articles, since they followed the quality standards. Thus, these periodicals can be considered both for consultation and as vehicles for publishing future articles. For further analyses, it is essential to apply other indicators of scientific activity such as bibliometrics, which evaluates quantitative aspects of the production, dissemination and use of information, and scientometrics, which is also concerned with the development of science policies, within which it is often superimposed on bibliometrics.

Genetically Modified Bacteria for Fuel Production: Development of Rhodobacteria as a Versatile Platform for Fuels Production

Energy Technology Data Exchange (ETDEWEB)

None

2010-07-01

Electrofuels Project: Penn State is genetically engineering bacteria called Rhodobacter to use electricity or electrically generated hydrogen to convert carbon dioxide into liquid fuels. Penn State is taking genes from oil-producing algae called Botryococcus braunii and putting them into Rhodobacter to produce hydrocarbon molecules, which closely resemble gasoline. Penn State is developing engineered tanks to support microbial fuel production and determining the most economical way to feed the electricity or hydrogen to the bacteria, including using renewable sources of power like solar energy.

Regional Scale/Regional Climate Model Development and Its Applications at Goddard

Science.gov (United States)

Tao, W.-K.; Lau, W.; Qian, J.; Jia, Y.; Wetzel, P.; Chou, M.-D.; Wang, Y.; Lynn, B.

2000-01-01

A Regional Land-Atmosphere Climate Simulation System (RELACS) is being developed and implemented at NASA Goddard Space Flight Center. One of the major goals of RELACS is to use a regional scale model (Penn State/NCAR MM5) with improved physical processes and in particular land-related processes, to understand the role of the land surface and its interaction with convection and radiation as well as the water/energy cycles in the Indo-China/South China Sea (SCS)/China, N. America and S. America region.

The International Center for Integrated Water Resources Management (ICIWaRM): The United States' Contribution to UNESCO IHP's Global Network of Water Centers

Science.gov (United States)

Logan, W. S.

2015-12-01

The concept of a "category 2 center"—i.e., one that is closely affiliated with UNESCO, but not legally part of UNESCO—dates back many decades. However, only in the last decade has the concept been fully developed. Within UNESCO, the International Hydrological Programme (IHP) has led the way in creating a network of regional and global water-related centers.ICIWaRM—the International Center for Integrated Water Resources Management—is one member of this network. Approved by UNESCO's General Conference, the center has been operating since 2009. It was designed to fill a niche in the system for a center that was backed by an institution with on-the-ground water management experience, but that also had strong connections to academia, NGOs and other governmental agencies. Thus, ICIWaRM is hosted by the US Army Corps of Engineers' Institute for Water Resources (IWR), but established with an internal network of partner institutions. Three main factors have contributed to any success that ICIWaRM has achieved in its global work: A focus on practical science and technology which can be readily transferred. This includes the Corps' own methodologies and models for planning and water management, and those of our university and government partners. Collaboration with other UNESCO Centers on joint applied research, capacity-building and training. A network of centers needs to function as a network, and ICIWaRM has worked together with UNESCO-affiliated centers in Chile, Brazil, Paraguay, the Dominican Republic, Japan, China, and elsewhere. Partnering with and supporting existing UNESCO-IHP programs. ICIWaRM serves as the Global Technical Secretariat for IHP's Global Network on Water and Development Information in Arid Lands (G-WADI). In addition to directly supporting IHP, work through G-WADI helps the center to frame, prioritize and integrate its activities. With the recent release of the United Nation's 2030 Agenda for Sustainable Development, it is clear that

Evaluation design of New York City's regulations on nutrition, physical activity, and screen time in early child care centers.

Science.gov (United States)

Breck, Andrew; Goodman, Ken; Dunn, Lillian; Stephens, Robert L; Dawkins, Nicola; Dixon, Beth; Jernigan, Jan; Kakietek, Jakub; Lesesne, Catherine; Lessard, Laura; Nonas, Cathy; O'Dell, Sarah Abood; Osuji, Thearis A; Bronson, Bernice; Xu, Ye; Kettel Khan, Laura

2014-10-16

This article describes the multi-method cross-sectional design used to evaluate New York City Department of Health and Mental Hygiene's regulations of nutrition, physical activity, and screen time for children aged 3 years or older in licensed group child care centers. The Center Evaluation Component collected data from a stratified random sample of 176 licensed group child care centers in New York City. Compliance with the regulations was measured through a review of center records, a facility inventory, and interviews of center directors, lead teachers, and food service staff. The Classroom Evaluation Component included an observational and biometric study of a sample of approximately 1,400 children aged 3 or 4 years attending 110 child care centers and was designed to complement the center component at the classroom and child level. The study methodology detailed in this paper may aid researchers in designing policy evaluation studies that can inform other jurisdictions considering similar policies.

An Architecture for Continuous Data Quality Monitoring in Medical Centers.

Science.gov (United States)

Endler, Gregor; Schwab, Peter K; Wahl, Andreas M; Tenschert, Johannes; Lenz, Richard

2015-01-01

In the medical domain, data quality is very important. Since requirements and data change frequently, continuous and sustainable monitoring and improvement of data quality is necessary. Working together with managers of medical centers, we developed an architecture for a data quality monitoring system. The architecture enables domain experts to adapt the system during runtime to match their specifications using a built-in rule system. It also allows arbitrarily complex analyses to be integrated into the monitoring cycle. We evaluate our architecture by matching its components to the well-known data quality methodology TDQM.

Activities of the JILA Atomic Collisions Cross Sections Data Center

International Nuclear Information System (INIS)

Gallagher, J.W.

1983-01-01

The JILA Atomic Collisions Cross Sections Data Center compiles, critically evaluates, and reviews cross sections and rates for low energy (<100 keV) collisions of electrons, photons, and heavy particles with atoms, ions, and simple molecules. Reports are prepared which provide easily accessible recommended data with error limits, list the fundamental literature related to specific topics, identify regions where data are missing, and point out inconsistencies in existing data. The general methodology used in producing evaluated compilations is described. Recently completed projects and work in progress are reported

Dosimetric methodology of the ICRP

International Nuclear Information System (INIS)

Eckerman, K.F.

1994-01-01

Establishment of guidance for the protection of workers and members of the public from radiation exposures necessitates estimation of the radiation dose to tissues of the body at risk. The dosimetric methodology formulated by the International Commission on Radiological Protection (ICRP) is intended to be responsive to this need. While developed for radiation protection, elements of the methodology are often applied in addressing other radiation issues; e.g., risk assessment. This chapter provides an overview of the methodology, discusses its recent extension to age-dependent considerations, and illustrates specific aspects of the methodology through a number of numerical examples

ERGONOMIC ASPECTS IN THE PLANNING AND EXECUTION OF PROJECTS: A TEXTILE PRODUCTS DISTRIBUTION CENTER PROJECT CASE STUDY

Directory of Open Access Journals (Sweden)

Emerson Lourenço da Silva

2013-01-01

Full Text Available The planning and execution phases of a distribution center project of a large textile industry was made, evaluating the ergonomic aspects related to the operations to be performed in the facility and staff anthropometric data. The ergonomic collaborative analysis of the tasks associated with the method of movement plotting, guided the planning of the picking, manual induction and order consolidation areas from the distribution center. Using this methodology, it was possible to obtain a proper ergonomically project planning and execution of the three studied areas.

Design Methodology - Design Synthesis

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

2003-01-01

Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

Effect of Outsourced Pharmacies of Rural Healthcare Centers on Service Quality in Abharand Soltanieh Counties

Directory of Open Access Journals (Sweden)

Ali Maher

2016-05-01

Full Text Available Recently, a part of healthcare services has been assigned to the private sector to increase the quality of medical services, increase patient satisfaction and reduce costs. In this regard, the outsourcing approach has been significantly considered for pharmaceutical services provided by healthcare centers. The purpose of this study is to evaluate the effect of outsourced pharmacies of rural healthcare centers on service quality using structural equations modelling. The methodology used was descriptive using correlation by structural equations modelling. The studied population included those patients who provided their medicines from pharmacies of rural healthcare centers in Abhar and Soltanieh counties. The samples included 384 of these patients. Data was collected by outsourcing and service quality questionnaires. A structural equation modelling was used to analyze data by LISREAL software. Results indicated a positive significant effect of outsourced pharmacies of rural healthcare centers on quality of tangibles, reliability, responsiveness, assurance and empathy. findings emphasize the role of outsourcing on quality of services. Outsourced pharmacies of rural healthcare centers of Abhar and Soltanieh counties lead to improved service quality.

A Central Composite Face-Centered Design for Parameters Estimation of PEM Fuel Cell Electrochemical Model

Directory of Open Access Journals (Sweden)

Khaled MAMMAR

2013-11-01

Full Text Available In this paper, a new approach based on Experimental of design methodology (DoE is used to estimate the optimal of unknown model parameters proton exchange membrane fuel cell (PEMFC. This proposed approach combines the central composite face-centered (CCF and numerical PEMFC electrochemical. Simulation results obtained using electrochemical model help to predict the cell voltage in terms of inlet partial pressures of hydrogen and oxygen, stack temperature, and operating current. The value of the previous model and (CCF design methodology is used for parametric analysis of electrochemical model. Thus it is possible to evaluate the relative importance of each parameter to the simulation accuracy. However this methodology is able to define the exact values of the parameters from the manufacture data. It was tested for the BCS 500-W stack PEM Generator, a stack rated at 500 W, manufactured by American Company BCS Technologies FC.

Solid Oxide Fuel Cells Operating on Alternative and Renewable Fuels

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaoxing; Quan, Wenying; Xiao, Jing; Peduzzi, Emanuela; Fujii, Mamoru; Sun, Funxia; Shalaby, Cigdem; Li, Yan; Xie, Chao; Ma, Xiaoliang; Johnson, David; Lee, Jeong; Fedkin, Mark; LaBarbera, Mark; Das, Debanjan; Thompson, David; Lvov, Serguei; Song, Chunshan

2014-09-30

This DOE project at the Pennsylvania State University (Penn State) initially involved Siemens Energy, Inc. to (1) develop new fuel processing approaches for using selected alternative and renewable fuels – anaerobic digester gas (ADG) and commercial diesel fuel (with 15 ppm sulfur) – in solid oxide fuel cell (SOFC) power generation systems; and (2) conduct integrated fuel processor – SOFC system tests to evaluate the performance of the fuel processors and overall systems. Siemens Energy Inc. was to provide SOFC system to Penn State for testing. The Siemens work was carried out at Siemens Energy Inc. in Pittsburgh, PA. The unexpected restructuring in Siemens organization, however, led to the elimination of the Siemens Stationary Fuel Cell Division within the company. Unfortunately, this led to the Siemens subcontract with Penn State ending on September 23rd, 2010. SOFC system was never delivered to Penn State. With the assistance of NETL project manager, the Penn State team has since developed a collaborative research with Delphi as the new subcontractor and this work involved the testing of a stack of planar solid oxide fuel cells from Delphi.

VEM: Virtual Enterprise Methodology

DEFF Research Database (Denmark)

Tølle, Martin; Vesterager, Johan

2003-01-01

This chapter presents a virtual enterprise methodology (VEM) that outlines activities to consider when setting up and managing virtual enterprises (VEs). As a methodology the VEM helps companies to ask the right questions when preparing for and setting up an enterprise network, which works...

Give Design a Chance: A Case for a Human Centered Approach to Operational Art

Science.gov (United States)

2017-03-30

shortcoming, organizational theorist Jamshid Gharajedaghi suggested, “design is a vehicle for enhancement of choice and holistic thinking ” that goes beyond...To address this question and confront assumptions and current methods of thinking , there is a need for a holistic and human centered approach in...MDMP). This monograph proposes a way of thinking and planning that goes beyond current Army doctrinal methodologies to address the changing

The Methodological Dynamism of Grounded Theory

Directory of Open Access Journals (Sweden)

Nicholas Ralph

2015-11-01

Full Text Available Variations in grounded theory (GT interpretation are the subject of ongoing debate. Divergences of opinion, genres, approaches, methodologies, and methods exist, resulting in disagreement on what GT methodology is and how it comes to be. From the postpositivism of Glaser and Strauss, to the symbolic interactionist roots of Strauss and Corbin, through to the constructivism of Charmaz, the field of GT methodology is distinctive in the sense that those using it offer new ontological, epistemological, and methodological perspectives at specific moments in time. We explore the unusual dynamism attached to GT’s underpinnings. Our view is that through a process of symbolic interactionism, in which generations of researchers interact with their context, moments are formed and philosophical perspectives are interpreted in a manner congruent with GT’s essential methods. We call this methodological dynamism, a process characterized by contextual awareness and moment formation, contemporaneous translation, generational methodology, and methodological consumerism.

Comparative study on software development methodologies

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2014-12-01

Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

Iowa Water Center | Iowa Water Center

Science.gov (United States)

Home Iowa State University Extension Iowa Water Center Submitted by mollyd on April 24, 2012 - 09 :42 Advancing the state of water knowledge and management The Iowa Water Center is a part of a nationwide network of university-based water centers created to encourage interdisciplinary water research

The Methodology of Magpies

Science.gov (United States)

Carter, Susan

2014-01-01

Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

User-Centered Design through Learner-Centered Instruction

Science.gov (United States)

Altay, Burçak

2014-01-01

This article initially demonstrates the parallels between the learner-centered approach in education and the user-centered approach in design disciplines. Afterward, a course on human factors that applies learner-centered methods to teach user-centered design is introduced. The focus is on three tasks to identify the application of theoretical and…

Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

International Nuclear Information System (INIS)

Oztunali, O.I.; Roles, G.W.

1986-01-01

Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology

Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Oztunali, O.I.; Roles, G.W.

1986-01-01

Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology.

Recombination luminescence from H centers and conversion of H centers into I centers in alkali iodides

International Nuclear Information System (INIS)

Berzina, B.J.

1981-01-01

The study is aimed at the search for H-plus-electron centers of luminescence and the investigation of the conversion of H- into I centers by the luminescence of H-plus-electron centers in alkali iodide crystals. KI, RbI and NaI crystals were studied at 12 K. H and F centers were created by irradiation with ultraviolet light corresponding to the absorption band of anion excitons. Then the excitation of electron centers by red light irradiation was followed. The spectra of stimulated recombination luminescence were studied. The luminescence of H-plus- electron centers had been observed and the conclusion was made that this center was formed on immobile H centers. In case of stable H centers the optically stimulated conversion of H centers into I centers occurs. The assumption is advanced on the spontaneous annihilation of near placed unstable F, H centers which leads to the creation of H-plus-electron luminescence centers and to the spontaneous H-I-centers conversion [ru

A Survey of a Remote Diagnosis Center for Nuclear Power Plants

International Nuclear Information System (INIS)

Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee

2005-01-01

Methodologies for remote diagnosis have been developed and applied to medical care and lots of industrial fields. Modern science technologies such as a fast network, high computing power, sensing technology and advanced robot engineering make it possible to diagnose remote targets. Nuclear power plant(NPP) has highly connected network enabling systems. The systems (accumulated data analysis systems, alarm systems, main control panel, NPP database systems and so on) are connected with each other through a network. But remote diagnosis researches for a NPP have been developed individually. Efficient monitoring power, convenient management and a costcutting of the diagnosis will be provided through integration of the remote diagnosis technologies. The result of the integration can be represented as a remote diagnosis center. We propose an architecture of the remote diagnosis center for a NPP in this paper

Introduction to LCA Methodology

DEFF Research Database (Denmark)

Hauschild, Michael Z.

2018-01-01

In order to offer the reader an overview of the LCA methodology in the preparation of the more detailed description of its different phases, a brief introduction is given to the methodological framework according to the ISO 14040 standard and the main elements of each of its phases. Emphasis...

Methodologies, languages and tools

International Nuclear Information System (INIS)

Amako, Katsuya

1994-01-01

This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

Data Centric Development Methodology

Science.gov (United States)

Khoury, Fadi E.

2012-01-01

Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

Symposium: An Overview of the 5-Year Research Agenda for the Research & Training Center for Children's Mental Health.

Science.gov (United States)

Friedman, Robert M.; Evans, Mary; Morrison-Rodriguez, Barbara; Kutash, Krista; Duchnowski, Al; Hernandez, Mario; Hodges, Sharon; Armstrong, Mary; Pires, Sheila; Stroul, Beth; Greenbaum, Paul; Brown, Eric; Lazear, Katherine

This paper describes each of eight current interrelated federally funded research projects conducted by the Research and Training Center for Children's Mental Health at the University of South Florida. For each project, information is provided on the project's background, purpose, methodology, and anticipated results. Project titles and principal…

Automated and simultaneous fovea center localization and macula segmentation using the new dynamic identification and classification of edges model

Science.gov (United States)

Onal, Sinan; Chen, Xin; Satamraju, Veeresh; Balasooriya, Maduka; Dabil-Karacal, Humeyra

2016-01-01

Abstract. Detecting the position of retinal structures, including the fovea center and macula, in retinal images plays a key role in diagnosing eye diseases such as optic nerve hypoplasia, amblyopia, diabetic retinopathy, and macular edema. However, current detection methods are unreliable for infants or certain ethnic populations. Thus, a methodology is proposed here that may be useful for infants and across ethnicities that automatically localizes the fovea center and segments the macula on digital fundus images. First, dark structures and bright artifacts are removed from the input image using preprocessing operations, and the resulting image is transformed to polar space. Second, the fovea center is identified, and the macula region is segmented using the proposed dynamic identification and classification of edges (DICE) model. The performance of the method was evaluated using 1200 fundus images obtained from the relatively large, diverse, and publicly available Messidor database. In 96.1% of these 1200 cases, the distance between the fovea center identified manually by ophthalmologists and automatically using the proposed method remained within 0 to 8 pixels. The dice similarity index comparing the manually obtained results with those of the model for macula segmentation was 96.12% for these 1200 cases. Thus, the proposed method displayed a high degree of accuracy. The methodology using the DICE model is unique and advantageous over previously reported methods because it simultaneously determines the fovea center and segments the macula region without using any structural information, such as optic disc or blood vessel location, and it may prove useful for all populations, including infants. PMID:27660803

Patient-Centered Prescription Model to improve therapeutic adherence in patients with multimorbidity

Directory of Open Access Journals (Sweden)

Javier González-Bueno

2018-05-01

Full Text Available To date, interventions to improve medication adherence in patients with multimorbidity have shown modest and inconsistent efficacy among available studies. Thereby, we should define new approaches aimed at improving medication adherence tailored to effective prescribing, with a multidisciplinary approach and patient-centered. In this regard, the Patient-Centered Prescription Model has shown its usefulness on improving appropriateness of drug treatments in patients with clinical complexity. For that, this strategy addresses the following four steps: 1 Patient-Centered assessment; 2 Diagnosis-Centered assessment; 3 Medication-Centered assessment; and 4 Therapeutic Plan. We propose through a clinical case an adaptation of the Patient-Centered Prescription Model to enhance both appropriateness and medication adherence in patients with multimorbidity. To this end, we have included on its first step the Spanish version of a cross-culturally adapted scale for the multidimensional assessment of medication adherence. Furthermore, we suggest a set of interventions to be applied in the three remaining steps of the model. These interventions were firstly identified by an overview of systematic reviews and then selected by a panel of experts based on Delphi methodology. All of these elements have been considered appropriate in patients with multimorbidity according to three criteria: strength of their supporting evidence, usefulness in the target population and feasibility of implementation in clinical practice. The proposed approach intends to lay the foundations for an innovative way in tackling medication adherence in patients with multimorbidity.

Evaluating the Impact of AIRS Observations on Regional Forecasts at the SPoRT Center

Science.gov (United States)

Zavodsky, Bradley

2011-01-01

NASA Short-term Prediction Research and Transition (SPoRT) Center collaborates with operational partners of different sizes and operational goals to improve forecasts using targeted projects and data sets. Modeling and DA activities focus on demonstrating utility of NASA data sets and capabilities within operational systems. SPoRT has successfully assimilated the Atmospheric Infrared Sounder (AIRS) radiance and profile data. A collaborative project is underway with the Joint Center for Satellite Data Assimilation (JCSDA) to use AIRS profiles to better understand the impact of AIRS radiances assimilated within Gridpoint Statistical Interpolation (GSI) in hopes of engaging the operational DA community in a reassessment of assimilation methodologies to more effectively assimilate hyperspectral radiances.

Disposal Criticality Analysis Methodology Topical Report

International Nuclear Information System (INIS)

Horton, D.G.

1998-01-01

The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), a ny processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

Disposal Criticality Analysis Methodology Topical Report

International Nuclear Information System (INIS)

D.G. Horton

1998-01-01

The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), any processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

Safety analysis methodology for OPR 1000

International Nuclear Information System (INIS)

Hwang-Yong, Jun

2005-01-01

Full text: Korea Electric Power Research Institute (KEPRI) has been developing inhouse safety analysis methodology based on the delicate codes available to KEPRI to overcome the problems arising from currently used vendor oriented methodologies. For the Loss of Coolant Accident (LOCA) analysis, the KREM (KEPRI Realistic Evaluation Methodology) has been developed based on the RELAP-5 code. The methodology was approved for the Westinghouse 3-loop plants by the Korean regulatory organization and the project to extent the methodology to the Optimized Power Reactor 1000 (OPR1000) has been ongoing since 2001. Also, for the Non-LOCA analysis, the KNAP (Korea Non-LOCA Analysis Package) has been developed using the UNICORN-TM code system. To demonstrate the feasibility of these codes systems and methodologies, some typical cases of the design basis accidents mentioned in the final safety analysis report (FSAR) were analyzed. (author)

The International Methodologies of Assessment of Employment Protection

Directory of Open Access Journals (Sweden)

Otenko Pavlo V.

2017-10-01

Full Text Available This article is concerned with International methodology of assessment of employment protection. The main problem that is raised in this article is the following one – what indicator and criteria should be used in order to determine the degree of employment protection in a particular country? Author outlines and comprises the basic indicators that were created by the leading institutions: the OECD, the World Bank and Cambridge Center for Business research. The positive as well as negative consequences and also an influence of having a stringent degree of employment protection on the areas like productivity, labor market, labor market flows, etc. are described and discussed. Author also suggests different steps that should be taken in order to reform the current situation and solve problems in the labor area. Three possible ways of how to reform and enhance employment protection are analyzed and characterized.

Data Center Energy Efficiency Technologies and Methodologies: A Review of Commercial Technologies and Recommendations for Application to Department of Defense Systems

Science.gov (United States)

2015-11-01

host multiple applications on a single server and split larger applications between multiple servers. If applications can be quickly and easily...improvements are often seen as leading to negative impacts on the organization that operates the DC. Another significant limiting factor for the DoD...34 Renewable and Sustainable Energy Reviews, vol. 31, pp. 622-638, 2014. [152] R. Miller, "Data Center Used to Heat Swimming Pool," Data Center Knowledge, 2

Menopause and Methodological Doubt

Science.gov (United States)

Spence, Sheila

2005-01-01

Menopause and methodological doubt begins by making a tongue-in-cheek comparison between Descartes' methodological doubt and the self-doubt that can arise around menopause. A hermeneutic approach is taken in which Cartesian dualism and its implications for the way women are viewed in society are examined, both through the experiences of women…

Modeling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue

International Nuclear Information System (INIS)

Singh, Rupesh; Das, Koushik; Okajima, Junnosuke; Maruyama, Shigenao; Mishra, Subhash C.

2015-01-01

This article deals with the spatial and the temporal evolution of tissue temperature during skin surface cooled laser induced hyperthermia. Three different skin surface cooling methodologies viz., optical window contact cooling, cryogenic spray cooling and cryogen cooled optical window contact cooling are considered. Sapphire, yttrium aluminum garnet, lithium tantalate, and magnesium oxide doped lithium niobate are the considered optical windows. The cryogens considered are liquid CO_2 and R1234yf. Heat transfer in the multilayer skin tissue embedded with thermally significant blood vessels pairs is modeled using the Pennes and Weinbaum–Jiji bioheat equations. Weinbaum–Jiji bioheat equation is used for the vascularized tissue. Laser transport in the tissue is modeled using the radiative transfer equation. Axial and radial (skin surface) temperature distributions for different combinations of optical windows and cryogens are analyzed. Liquid CO_2 cooled yttrium aluminum garnet is found to be the best surface cooling mechanism. - Highlights: • Skin surface cooled laser induced hyperthermia is studied. • A multi-layer 2-D cylindrical tissue geometry is considered. • Both Pennes and Weinbaum–Jiji bioheat models are considered. • Laser transport in the tissue is modeled using discrete ordinate method. • Results for 4 optical windows and 2 cryogens for skin cooling are presented.

Mapping structural covariance networks of facial emotion recognition in early psychosis: A pilot study.

Science.gov (United States)

Buchy, Lisa; Barbato, Mariapaola; Makowski, Carolina; Bray, Signe; MacMaster, Frank P; Deighton, Stephanie; Addington, Jean

2017-11-01

People with psychosis show deficits recognizing facial emotions and disrupted activation in the underlying neural circuitry. We evaluated associations between facial emotion recognition and cortical thickness using a correlation-based approach to map structural covariance networks across the brain. Fifteen people with an early psychosis provided magnetic resonance scans and completed the Penn Emotion Recognition and Differentiation tasks. Fifteen historical controls provided magnetic resonance scans. Cortical thickness was computed using CIVET and analyzed with linear models. Seed-based structural covariance analysis was done using the mapping anatomical correlations across the cerebral cortex methodology. To map structural covariance networks involved in facial emotion recognition, the right somatosensory cortex and bilateral fusiform face areas were selected as seeds. Statistics were run in SurfStat. Findings showed increased cortical covariance between the right fusiform face region seed and right orbitofrontal cortex in controls than early psychosis subjects. Facial emotion recognition scores were not significantly associated with thickness in any region. A negative effect of Penn Differentiation scores on cortical covariance was seen between the left fusiform face area seed and right superior parietal lobule in early psychosis subjects. Results suggest that facial emotion recognition ability is related to covariance in a temporal-parietal network in early psychosis. Copyright © 2017 Elsevier B.V. All rights reserved.

Information technology security system engineering methodology

Science.gov (United States)

Childs, D.

2003-01-01

A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

Implementing the PAIN RelieveIt Randomized Controlled Trial in Hospice Care: Mechanisms for Success and Meeting PCORI Methodology Standards.

Science.gov (United States)

Ezenwa, Miriam O; Suarez, Marie L; Carrasco, Jesus D; Hipp, Theresa; Gill, Anayza; Miller, Jacob; Shea, Robert; Shuey, David; Zhao, Zhongsheng; Angulo, Veronica; McCurry, Timothy; Martin, Joanna; Yao, Yingwei; Molokie, Robert E; Wang, Zaijie Jim; Wilkie, Diana J

2017-07-01

This purpose of this article is to describe how we adhere to the Patient-Centered Outcomes Research Institute's (PCORI) methodology standards relevant to the design and implementation of our PCORI-funded study, the PAIN RelieveIt Trial. We present details of the PAIN RelieveIt Trial organized by the PCORI methodology standards and components that are relevant to our study. The PAIN RelieveIt Trial adheres to four PCORI standards and 21 subsumed components. The four standards include standards for formulating research questions, standards associated with patient centeredness, standards for data integrity and rigorous analyses, and standards for preventing and handling missing data. In the past 24 months, we screened 2,837 cancer patients and their caregivers; 874 dyads were eligible; 223.5 dyads consented and provided baseline data. Only 55 patients were lost to follow-up-a 25% attrition rate. The design and implementation of the PAIN RelieveIt Trial adhered to PCORI's methodology standards for research rigor.

Assurance of Myeloid Growth Factor Administration in an Infusion Center: Pilot Quality Improvement Initiative.

Science.gov (United States)

Ramirez, Pamela Maree; Peterson, Barry; Holtshopple, Christine; Borja, Kristina; Torres, Vincent; Valdivia-Peppers, Lucille; Harriague, Julio; Joe, Melanie D

2017-12-01

Four incident reports involving missed doses of myeloid growth factors (MGFs) triggered the need for an outcome-driven initiative. From March 1, 2015, to February 29, 2016, at University of California Irvine Health Chao Infusion Center, 116 of 3,300 MGF doses were missed (3.52%), including pegfilgrastim, filgrastim, and sargramostim. We hypothesized that with the application of Lean Six Sigma methodology, we would achieve our primary objective of reducing the number of missed MGF doses to < 0.5%. This quality improvement initiative was conducted at Chao Infusion Center as part of a Lean Six Sigma Green Belt Certification Program. Therefore, Lean Six Sigma principles and tools were used throughout each phase of the project. Retrospective and prospective medical record reviews and data analyses were performed to evaluate the extent of the identified problem and impact of the process changes. Improvements included systems applications, practice changes, process modifications, and safety-net procedures. Preintervention, 24 missed doses (20.7%) required patient supportive care measures, resulting in increased hospital costs and decreased quality of care. Postintervention, from June 8, 2016, to August 7, 2016, zero of 489 MGF doses were missed after 2 months of intervention ( P < .001). Chao Infusion Center reduced missed doses from 3.52% to 0%, reaching the goal of < 0.5%. The establishment of simplified and standardized processes with safety checks for error prevention increased quality of care. Lean Six Sigma methodology can be applied by other institutions to produce positive outcomes and implement similar practice changes.

Methodological practicalities in analytical generalization

DEFF Research Database (Denmark)

Halkier, Bente

2011-01-01

generalization. Theoretically, the argumentation in the article is based on practice theory. The main part of the article describes three different examples of ways of generalizing on the basis of the same qualitative data material. There is a particular focus on describing the methodological strategies......In this article, I argue that the existing literature on qualitative methodologies tend to discuss analytical generalization at a relatively abstract and general theoretical level. It is, however, not particularly straightforward to “translate” such abstract epistemological principles into more...... operative methodological strategies for producing analytical generalizations in research practices. Thus, the aim of the article is to contribute to the discussions among qualitatively working researchers about generalizing by way of exemplifying some of the methodological practicalities in analytical...

ImTK: an open source multi-center information management toolkit

Science.gov (United States)

Alaoui, Adil; Ingeholm, Mary Lou; Padh, Shilpa; Dorobantu, Mihai; Desai, Mihir; Cleary, Kevin; Mun, Seong K.

2008-03-01

The Information Management Toolkit (ImTK) Consortium is an open source initiative to develop robust, freely available tools related to the information management needs of basic, clinical, and translational research. An open source framework and agile programming methodology can enable distributed software development while an open architecture will encourage interoperability across different environments. The ISIS Center has conceptualized a prototype data sharing network that simulates a multi-center environment based on a federated data access model. This model includes the development of software tools to enable efficient exchange, sharing, management, and analysis of multimedia medical information such as clinical information, images, and bioinformatics data from multiple data sources. The envisioned ImTK data environment will include an open architecture and data model implementation that complies with existing standards such as Digital Imaging and Communications (DICOM), Health Level 7 (HL7), and the technical framework and workflow defined by the Integrating the Healthcare Enterprise (IHE) Information Technology Infrastructure initiative, mainly the Cross Enterprise Document Sharing (XDS) specifications.

A Critique of Methodological Dualism in Education

Science.gov (United States)

Yang, Jeong A.; Yoo, Jae-Bong

2018-01-01

This paper aims to critically examine the paradigm of methodological dualism and explore whether methodologies in social science currently are appropriate for educational research. There are two primary methodologies for studying education: quantitative and qualitative methods. This is what we mean by "methodological dualism". Is…

[The Psychosocial Adaptation Process of Psychiatric Nurses Working in Community Mental Health Centers].

Science.gov (United States)

Min, So Young

2015-12-01

The aim of this study was to verify psychosocial issues faced by psychiatric and community mental health nurse practitioners (PCMHNP) working in community mental health centers, and to identify the adaptation processes used to resolve the issues. Data were collected through in-depth interviews between December 2013 and August 2014. Participants were 11 PCMHNP working in community mental health centers. Analysis was done using the grounded theory methodology. The first question was "How did you start working at a community mental health center; what were the difficulties you faced during your employment and how did you resolve them?" The core category was 'regulating within relationships.' The adaptation process was categorized into three sequential stages: 'nesting,' 'hanging around the nest,' and 'settling into the nest.' Various action/interaction strategies were employed in these stages. The adaptation results from using these strategies were 'psychiatric nursing within life' and 'a long way to go.' The results of this study are significant as they aid in understanding the psychosocial adaptation processes of PCMHNP working in community mental health centers, and indicate areas to be addressed in the future in order for PCMHNP to fulfill their professional role in the local community.

Sexual Function in Breastfeeding Women in Family Health Centers of Tabriz, Iran, 2012

Directory of Open Access Journals (Sweden)

Jamileh Malakoti

2013-06-01

Full Text Available Introduction:There are conflicting evidences about the effects of breastfeeding on postpartum maternal sexual functioning. With regard to the methodological weaknesses of previous studies and cultural differences affecting their issue, the present study aims to evaluate sexual functions of lactating women and its components. Methods:This is a descriptive study in which 200 eligible postpartum women were selected from eight health centers of Tabriz (25 from each center. The eligible women were called and invited to attend the health center. The evaluation was performed using the Persian version of normalized questionnaire of the Female Sexual Function Index (FSFI. The participants’ sexual function scores above 28 were considered desirable (regarding the cut-off point mentioned in the Persian version of the questionnaire. Results:Almost all of the lactating women suffered from sexual dysfunctions. Regarding the sexual performance’s components the lowest scores were for libido and sexual arousal. Conclusion:According to the findings of the studies, in order to prevent the effects of sexual dysfunction on lactating women and their family members it is necessary to develop sexual health programs in health centers.

Reliability Centered Maintenance for Savannah River Site's interim waste management facilities

International Nuclear Information System (INIS)

Hauer, K.A.; Wilson, J.F.

1992-01-01

The application of Reliability Centered Maintenance (RCM) has been shown to be an effective means to optimize maintenance programs or to establish new programs. The key to success of any RCM program is to customize the methodology to meet the specific needs of the implementing organization. This paper discusses how RCM is being used to establish the preventive maintenance program and how the resulting system data is being used to support the Technical Baseline reconstitution effort for the interim Waste Management Division of Westinghouse Savannah River Company (WSRC)

Use of lean and six sigma methodology to improve operating room efficiency in a high-volume tertiary-care academic medical center.

Science.gov (United States)

Cima, Robert R; Brown, Michael J; Hebl, James R; Moore, Robin; Rogers, James C; Kollengode, Anantha; Amstutz, Gwendolyn J; Weisbrod, Cheryl A; Narr, Bradly J; Deschamps, Claude

2011-07-01

Operating rooms (ORs) are resource-intense and costly hospital units. Maximizing OR efficiency is essential to maintaining an economically viable institution. OR efficiency projects often focus on a limited number of ORs or cases. Efforts across an entire OR suite have not been reported. Lean and Six Sigma methodologies were developed in the manufacturing industry to increase efficiency by eliminating non-value-added steps. We applied Lean and Six Sigma methodologies across an entire surgical suite to improve efficiency. A multidisciplinary surgical process improvement team constructed a value stream map of the entire surgical process from the decision for surgery to discharge. Each process step was analyzed in 3 domains, ie, personnel, information processed, and time. Multidisciplinary teams addressed 5 work streams to increase value at each step: minimizing volume variation; streamlining the preoperative process; reducing nonoperative time; eliminating redundant information; and promoting employee engagement. Process improvements were implemented sequentially in surgical specialties. Key performance metrics were collected before and after implementation. Across 3 surgical specialties, process redesign resulted in substantial improvements in on-time starts and reduction in number of cases past 5 pm. Substantial gains were achieved in nonoperative time, staff overtime, and ORs saved. These changes resulted in substantial increases in margin/OR/day. Use of Lean and Six Sigma methodologies increased OR efficiency and financial performance across an entire operating suite. Process mapping, leadership support, staff engagement, and sharing performance metrics are keys to enhancing OR efficiency. The performance gains were substantial, sustainable, positive financially, and transferrable to other specialties. Copyright © 2011 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

A development methodology for scientific software

International Nuclear Information System (INIS)

Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

1985-01-01

We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

Imaginative methodologies in the social sciences

DEFF Research Database (Denmark)

Imaginative Methodologies develops, expands and challenges conventional social scientific methodology and language by way of literary, poetic and other alternative sources of inspiration. Sociologists, social workers, anthropologists, criminologists and psychologists all try to rethink, provoke...... and reignite social scientific methodology. Imaginative Methodologies challenges the mainstream social science methodological orthodoxy closely guarding the boundaries between the social sciences and the arts and humanities, pointing out that authors and artists are often engaged in projects parallel to those...... of the social sciences and vice versa, and that artistic and cultural productions today do not constitute a specialist field, but are integral to our social reality. The book will be of interest to scholars and students in the social sciences and across the arts and humanities working with questions...

Remote Cloud Sensing Intensive Observation Period (RCS-IOP) millimeter-wave radar calibration and data intercomparison

Energy Technology Data Exchange (ETDEWEB)

Sekelsky, S.M.; Firda, J.M.; McIntosh, R.E. [Univ. of Massachusetts, Amherst, MA (United States)] [and others

1996-04-01

During April 1994, the University of Massachusetts (UMass) and the Pennsylvania State University (Penn State) fielded two millimeter-wave atmospheric radars in the Atmospheric Radiation Measurement Remote Cloud Sensing Intensive Operation Period (RCS-IOP) experiment. The UMass Cloud Profiling Radar System (CPRS) operates simultaneously at 33.12 GHz and 94.92 GHz through a single antenna. The Penn State radar operates at 93.95 GHz and has separate transmitting and receiving antennas. The two systems were separated by approximately 75 meters and simultaneously observed a variety of cloud types at verticle incidence over the course of the experiment. This abstract presents some initial results from our calibration efforts. An absolute calibration of the UMass radar was made from radar measurements of a trihedral corner reflector, which has a known radar cross-section. A relative calibration of between the Penn State and UMass radars is made from the statistical comparison of zenith pointing measurements of low altitude liquid clouds. Attenuation is removed with the aid of radiosonde data, and the difference in the calibration between the UMass and Penn State radars is determined by comparing the ratio of 94-GHz and 95-GHz reflectivity values to a model that accounts for parallax effects of the two antennas used in the Penn State system.

Investigations On Historic Centers In Seismic Areas: Guidelines For The Diagnosis

International Nuclear Information System (INIS)

Binda, Luigia; Cardani, Giuliana; Modena, Claudio; Valluzzi, Maria Rosa; Saisi, Antonella

2008-01-01

After the earthquake that hit central Italy in 1979, many small historic centers were restored. A subsequent seismic event occurred in 1997 in Umbria-Marche regions revealed that some techniques used in the previous interventions were not successful due to low durability of new materials and/or incompatibility between the new and the existing materials and structures. An extensive investigation on four small typical historic centers in Umbria was carried out. The objectives of the research were: (i) to define a methodology for the vulnerability analysis of historic buildings at the level of the historic centre, (ii) to collect information on the effectiveness of the repair techniques both traditional and new, (iii) to set up Databases storing the information useful to prepare rescue plans, (iv) to use the collected knowledge for the implementation of reliable models for the vulnerability analysis, (v) to prepare guidelines for investigation and vulnerability analysis

42 CFR 441.472 - Budget methodology.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Budget methodology. 441.472 Section 441.472 Public... Self-Directed Personal Assistance Services Program § 441.472 Budget methodology. (a) The State shall set forth a budget methodology that ensures service authorization resides with the State and meets the...

SOAC - State-of-the-Art Car Engineering Tests at Department of Transportation High Speed Ground Test Center : Volume 2. Performance Tests.

Science.gov (United States)

1975-01-01

The six-volume report presents the technical methodology, data samples, and results of tests conducted on the SOAC on the Rail Transit Test Track at the High Speed Ground Test Center in Pueblo, Colorado during the period April to July 1973. The Test ...

'The methodology of positive economics' does not give us the methodology of positive economics

NARCIS (Netherlands)

U.I. Mäki (Uskali)

2003-01-01

textabstractIt is argued that rather than a well defined F-Twist, Milton Friedman's 'Methodology of positive economies' offers an F-Mix: a pool of ambiguous and inconsistent ingredients that can be used for putting together a number of different methodological positions. This concerns issues such as

Volume totalizers analysis of pipelines operated by TRANSPETRO National Operational Control Center; Analise de totalizadores de volume em oleodutos operados pelo Centro Nacional de Controle e Operacao da TRANSPETRO

Energy Technology Data Exchange (ETDEWEB)

Aramaki, Thiago Lessa; Montalvao, Antonio Filipe Falcao [Petrobras Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil); Marques, Thais Carrijo [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)

2012-07-01

This paper aims to present the results and methodology in the analysis of differences in volume totals used in systems such as batch tracking and leak detection of pipelines operated by the National Center for Operational Control (CNCO) at TRANSPETRO. In order to optimize this type of analysis, software was developed to acquisition and processing of historical data using the methodology developed. The methodology developed takes into account the particularities encountered in systems operated by TRANSPETRO, more specifically, by CNCO. (author)

Analysis of Methodologies for Identifying Exclusion Zones for Concentrating Solar Power (CSP); Analisis de Metodologias de Identificacion de Zonas de Exclusion para Estudios de Potencial de Energia Electrica Termosolar (CSP)

Energy Technology Data Exchange (ETDEWEB)

Dominguez, P.; Ramirez, L.; Navarro, A. A.; Polo, J.; Zarza, E.

2013-07-01

The aim of this study is the proposal of a valid and unique methodology to any territory of the potential for solar power generation, reducing subjectivity and enabling comparison of results from the examination of several existing methodologies for CSP, particularly those developed by the Institute for diversification and saving of Energy (IDAE), Greenpeace, National renewable energy laboratory (NREL) and the German Aerospace Center (DLR). Subsequently, we apply and compare the results obtained with those already installed CSP plants, giving an idea of the suitability of each methodology to locate plants in areas considered suitable. (Author)

Predictive Model and Methodology for Heat Treatment Distortion Final Report CRADA No. TC-298-92

Energy Technology Data Exchange (ETDEWEB)

Nikkel, D. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McCabe, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

This project was a multi-lab, multi-partner CRADA involving LLNL, Los Alamos National Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, Martin Marietta Energy Systems and the industrial partner, The National Center of Manufacturing Sciences (NCMS). A number of member companies of NCMS participated including General Motors Corporation, Ford Motor Company, The Torrington Company, Gear Research, the Illinois Institute of Technology Research Institute, and Deformation Control Technology •. LLNL was the lead laboratory for metrology technology used for validation of the computational tool/methodology. LLNL was also the lead laboratory for the development of the software user interface , for the computational tool. This report focuses on the participation of LLNL and NCMS. The purpose of the project was to develop a computational tool/methodology that engineers would use to predict the effects of heat treatment on the _size and shape of industrial parts made of quench hardenable alloys. Initially, the target application of the tool was gears for automotive power trains.

Reconciling Anti-essentialism and Quantitative Methodology

DEFF Research Database (Denmark)

Jensen, Mathias Fjællegaard

2017-01-01

Quantitative methodology has a contested role in feminist scholarship which remains almost exclusively qualitative. Considering Irigaray’s notion of mimicry, Spivak’s strategic essentialism, and Butler’s contingent foundations, the essentialising implications of quantitative methodology may prove...... the potential to reconcile anti-essentialism and quantitative methodology, and thus, to make peace in the quantitative/qualitative Paradigm Wars....

Methodological Proposal for Identification and Evaluation of Environmental Aspects and Impacts of IPEN Nuclear Facilities: A Case Study Applied to the Nuclear Fuel Center

International Nuclear Information System (INIS)

Mattos, Luis A. Terribile de; Filho, Tufic Madi; Meldonian, Nelson Leon

2013-06-01

This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Control Plan for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (authors)

Methodological issues of genetic association studies.

Science.gov (United States)

Simundic, Ana-Maria

2010-12-01

Genetic association studies explore the association between genetic polymorphisms and a certain trait, disease or predisposition to disease. It has long been acknowledged that many genetic association studies fail to replicate their initial positive findings. This raises concern about the methodological quality of these reports. Case-control genetic association studies often suffer from various methodological flaws in study design and data analysis, and are often reported poorly. Flawed methodology and poor reporting leads to distorted results and incorrect conclusions. Many journals have adopted guidelines for reporting genetic association studies. In this review, some major methodological determinants of genetic association studies will be discussed.

Methodological guidelines

Energy Technology Data Exchange (ETDEWEB)

Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

1999-04-01

The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs.

Methodological guidelines

International Nuclear Information System (INIS)

Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

1999-01-01

The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs

Which Methodology Works Better? English Language Teachers' Awareness of the Innovative Language Learning Methodologies

Science.gov (United States)

Kurt, Mustafa

2015-01-01

The present study investigated whether English language teachers were aware of the innovative language learning methodologies in language learning, how they made use of these methodologies and the learners' reactions to them. The descriptive survey method was employed to disclose the frequencies and percentages of 175 English language teachers'…

Mechatronics methodology: 15 years of experience

Directory of Open Access Journals (Sweden)

Efren Gorrostieta

2015-09-01

Full Text Available This article presents a methodology to teach students to develop mechatronic projects. It was taught in higher education schools, in different universities in Mexico, in courses such as: Robotics, Control Systems, Mechatronic Systems, Artificial Intelligence, etc. The intention of this methodology is not only to achieve the integration of different subjects but also to accomplish synergy between them so that the final result may be the best possible in quality, time and robustness. Since its introduction into the educational area, this methodology was evaluated and modified for approximately five years, were substantial characteristics were adopted. For the next ten years, only minor alterations were carried out. Fifteen years of experience have proven that the methodology is useful not only for training but also for real projects. In this article, we first explain the methodology and its main characteristics, as well as a brief history of its teaching in different educational programs. Then, we present two cases were the methodology was successfully applied. The first project consisted in the design, construction and evaluation of a mobile robotic manipulator which aims to be used as an explosives ordnance device. In the second case, we document the results of a project assignment for robotics tasks carried out by students which were formerly taught with the methodology.

Industry to Education Technology Transfer Program. Composite Materials--Personnel Development. Final Report.

Science.gov (United States)

Tomezsko, Edward S. J.

A composite materials education program was established to train Boeing Helicopter Company employees in the special processing of new filament-reinforced polymer composite materials. During the personnel development phase of the joint Boeing-Penn State University project, an engineering instructor from Penn State completed a 5-month, full-time…

New Center Links Earth, Space, and Information Sciences

Science.gov (United States)

Aswathanarayana, U.

2004-05-01

Broad-based geoscience instruction melding the Earth, space, and information technology sciences has been identified as an effective way to take advantage of the new jobs created by technological innovations in natural resources management. Based on this paradigm, the University of Hyderabad in India is developing a Centre of Earth and Space Sciences that will be linked to the university's super-computing facility. The proposed center will provide the basic science underpinnings for the Earth, space, and information technology sciences; develop new methodologies for the utilization of natural resources such as water, soils, sediments, minerals, and biota; mitigate the adverse consequences of natural hazards; and design innovative ways of incorporating scientific information into the legislative and administrative processes. For these reasons, the ethos and the innovatively designed management structure of the center would be of particular relevance to the developing countries. India holds 17% of the world's human population, and 30% of its farm animals, but only about 2% of the planet's water resources. Water will hence constitute the core concern of the center, because ecologically sustainable, socially equitable, and economically viable management of water resources of the country holds the key to the quality of life (drinking water, sanitation, and health), food security, and industrial development of the country. The center will be focused on interdisciplinary basic and pure applied research that is relevant to the practical needs of India as a developing country. These include, for example, climate prediction, since India is heavily dependent on the monsoon system, and satellite remote sensing of soil moisture, since agriculture is still a principal source of livelihood in India. The center will perform research and development in areas such as data assimilation and validation, and identification of new sensors to be mounted on the Indian meteorological

Screening radon risks: A methodology for policymakers

International Nuclear Information System (INIS)

Eisinger, D.S.; Simmons, R.A.; Lammering, M.; Sotiros, R.

1991-01-01

This paper provides an easy-to-use screening methodology to estimate potential excess lifetime lung cancer risk resulting from indoor radon exposure. The methodology was developed under U.S. EPA Office of Policy, Planning, and Evaluation sponsorship of the agency's Integrated Environmental Management Projects (IEMP) and State/Regional Comparative Risk Projects. These projects help policymakers understand and use scientific data to develop environmental problem-solving strategies. This research presents the risk assessment methodology, discusses its basis, and identifies appropriate applications. The paper also identifies assumptions built into the methodology and qualitatively addresses methodological uncertainties, the direction in which these uncertainties could bias analyses, and their relative importance. The methodology draws from several sources, including risk assessment formulations developed by the U.S. EPA's Office of Radiation Programs, the EPA's Integrated Environmental Management Project (Denver), the International Commission on Radiological Protection, and the National Institute for Occupational Safety and Health. When constructed as a spreadsheet program, the methodology easily facilitates analyses and sensitivity studies (the paper includes several sensitivity study options). The methodology will be most helpful to those who need to make decisions concerning radon testing, public education, and exposure prevention and mitigation programs.26 references

Application of reliability centered maintenance to Embalse NPP

International Nuclear Information System (INIS)

Torres, Antonio; Perdomo, Manuel; Fornero, Damian; Corchera, Roberto

2010-01-01

One of the most recent applications of Probabilistic Safety Analysis to Embalse NPP is the Safety Oriented Maintenance Program developed through the Reliability Centered Maintenance (RCM) methodology. Such an application was carried out by a cooperated effort between the staff of nuclear safety department of NPP and experts from Instituto Superior de Tecnologias y Ciencias Aplicadas of Cuba. So far 6 technological systems have been analyzed with important results regarding the optimization of preventive and predictive maintenance program of those systems. Any tasks of RCM were automated via MOSEG code. The results of this study were focused on the elaboration and modification of the Preventive Program, prioritization of stocks, reorientation of predictive techniques and modification in the time parameters of maintenance. (author)

Human resources management in fitness centers and their relationship with the organizational performance

Directory of Open Access Journals (Sweden)

Jerónimo García Fernández

2014-12-01

Full Text Available Purpose: Human capital is essential in organizations providing sports services. However, there are few studies that examine what practices are carried out and whether they, affect sports organizations achieve better results are. Therefore the aim of this paper is to analyze the practices of human resource management in private fitness centers and the relationship established with organizational performance.Design/methodology/approach: Questionnaire to 101 managers of private fitness centers in Spain, performing exploratory and confirmatory factor analysis, and linear regressions between the variables.Findings: In organizations of fitness, the findings show that training practices, reward, communication and selection are positively correlated with organizational performance.Research limitations/implications: The fact that you made a convenience sampling in a given country and reduce the extrapolation of the results to the market.Originality/value: First, it represents a contribution to the fact that there are no studies analyzing the management of human resources in sport organizations from the point of view of the top leaders. On the other hand, allows fitness center managers to adopt practices to improve organizational performance.

Review and evaluation of paleohydrologic methodologies

Energy Technology Data Exchange (ETDEWEB)

Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

1982-12-01

A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites.

Review and evaluation of paleohydrologic methodologies

International Nuclear Information System (INIS)

Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

1982-12-01

A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites

Building ASIPS the Mescal methodology

CERN Document Server

Gries, Matthias

2006-01-01

A number of system designers use ASIP's rather than ASIC's to implement their system solutions. This book gives a comprehensive methodology for the design of these application-specific instruction processors (ASIPs). It includes demonstrations of applications of the methodologies using the Tipi research framework.

Center for Integrated Nanotechnologies (CINT) Chemical Release Modeling Evaluation

Energy Technology Data Exchange (ETDEWEB)

Stirrup, Timothy Scott [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-12-20

This evaluation documents the methodology and results of chemical release modeling for operations at Building 518, Center for Integrated Nanotechnologies (CINT) Core Facility. This evaluation is intended to supplement an update to the CINT [Standalone] Hazards Analysis (SHA). This evaluation also updates the original [Design] Hazards Analysis (DHA) completed in 2003 during the design and construction of the facility; since the original DHA, additional toxic materials have been evaluated and modeled to confirm the continued low hazard classification of the CINT facility and operations. This evaluation addresses the potential catastrophic release of the current inventory of toxic chemicals at Building 518 based on a standard query in the Chemical Information System (CIS).

Deepest X-Rays Ever Reveal universe Teeming With Black Holes

Science.gov (United States)

2001-03-01

-ray wavelengths. Both Chandra Deep Fields are comparable in observation time to the Hubble Deep Fields, but cover a much larger area of the sky. "In essence, it is like seeing galaxies similar to our own Milky Way at much earlier times in their lives," Hornschemeier added. "These data will help scientists better understand star formation and how stellar-sized black holes evolve." Combining infrared and X-ray observations, the Penn State team also found veils of dust and gas are common around young black holes. Another discovery to emerge from the Chandra Deep Field South is the detection of an extremely distant X-ray quasar, shrouded in gas and dust. "The discovery of this object, some 12 billion light years away, is key to understanding how dense clouds of gas form galaxies, with massive black holes at their centers," said Colin Norman of Johns Hopkins University. The Chandra Deep Field South results were complemented by the extensive use of deep optical observations supplied by the Very Large Telescope of the European Southern Observatory in Garching, Germany. The Penn State team obtained optical spectroscopy and imaging using the Hobby-Eberly Telescope in Ft. Davis, TX, and the Keck Observatory atop Mauna Kea, HI. Chandra's Advanced CCD Imaging Spectrometer was developed for NASA by Penn State and Massachusetts Institute of Technology under the leadership of Penn State Professor Gordon Garmire. NASA's Marshall Space Flight Center, Huntsville, AL, manages the Chandra program for the Office of Space Science, Washington, DC. TRW, Inc., Redondo Beach, California, is the prime contractor for the spacecraft. The Smithsonian's Chandra X-ray Center controls science and flight operations from Cambridge, MA. More information is available on the Internet at: http://chandra.harvard.edu AND http://chandra.nasa.gov

Preliminary safety analysis methodology for the SMART

Energy Technology Data Exchange (ETDEWEB)

Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-03-01

This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

PETA: Methodology of Information Systems Security Penetration Testing

Directory of Open Access Journals (Sweden)

Tomáš Klíma

2016-12-01

Full Text Available Current methodologies of information systems penetration testing focuses mainly on a high level and technical description of the testing process. Unfortunately, there is no methodology focused primarily on the management of these tests. It often results in a situation when the tests are badly planned, managed and the vulnerabilities found are unsystematically remediated. The goal of this article is to present new methodology called PETA which is focused mainly on the management of penetration tests. Development of this methodology was based on the comparative analysis of current methodologies. New methodology incorporates current best practices of IT governance and project management represented by COBIT and PRINCE2 principles. Presented methodology has been quantitatively evaluated.

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Chung, Chang Hyun; You, Young Woo; Kim, Yoon Ik; Yang, Hui Chang; Huh, Byeong Gill; Lee, Dong Won; Ahn, Gwan Won [Seoul National Univ., Seoul (Korea, Republic of)

2001-03-15

The purpose of this study IS the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of nuclear power plants. In this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested. Configuration control assessment methodology suggested in this study for the purpose of the development of configuration control methodology reflecting the characteristics of Korean NPPs, can be utilized as the supplement of current PSA methodologies.

Regional nuclear fuel cycle centers study project

International Nuclear Information System (INIS)

Bennett, L.; Catlin, R.G.; Meckoni, V.

1977-01-01

The concept of regional fuel cycle centers (RFCC) has attracted wide interest. The concept was endorsed by many countries in discussions at the General Conference of the International Atomic Energy Agency and at the General Assembly of the United Nations. Accordingly, in 1975, the IAEA initiated a detailed study of the RFCC concept. The Agency study has concentrated on what is referred to as the ''back-end'' of the fuel cycle because that is the portion which is currently problematic. The study covers transport, storage, processing and recycle activities starting from the time the spent fuel leaves the reactor storage pools and through all steps until the recycled fuel is in finished fuel elements and shipped to the reactor. A detailed evaluation of the specific features of large regional fuel cycle centers established on a multinational basis vis-a-vis smaller dispersed fuel cycle facilities set up on a national basis has been carried out. The methodology for assessment of alternative strategies for fuel storage, reprocessing, and recycling of plutonium has been developed, characteristic data on material flows and cost factors have been generated, and an analytic system has been developed to carry out such evaluations including appropriate sensitivity analysis. Studies in related areas on institutional and legal, organizational, environmental, materials control and other essential aspects have also been made. The material developed during the course of this Study would enable any group of interested Member States to examine and work out alternative strategies pertinent to their present and projected nuclear fuel cycle needs, as well as evolve institutional, legal and other appropriate frameworks or agreements for the establishment of fuel cycle centers on a multinational cooperative basis

Formalizing the ISDF Software Development Methodology

OpenAIRE

Mihai Liviu DESPA

2015-01-01

The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

A Methodology to Assess Ionospheric Models for GNSS

Science.gov (United States)

Rovira-Garcia, Adria; Juan, José Miguel; Sanz, Jaume; González-Casado, Guillermo; Ibánez, Deimos

2015-04-01

Testing the accuracy of the ionospheric models used in the Global Navigation Satellite System (GNSS) is a long-standing issue. It is still a challenging problem due to the lack of accurate enough slant ionospheric determinations to be used as a reference. The present study proposes a methodology to assess any ionospheric model used in satellite-based applications and, in particular, GNSS ionospheric models. The methodology complements other analysis comparing the navigation based on different models to correct the code and carrier-phase observations. Specifically, the following ionospheric models are assessed: the operational models broadcast in the Global Positioning System (GPS), Galileo and the European Geostationary Navigation Overlay System (EGNOS), the post-process Global Ionospheric Maps (GIMs) from different analysis centers belonging to the International GNSS Service (IGS) and, finally, a new GIM computed by the gAGE/UPC research group. The methodology is based in the comparison between the predictions of the ionospheric model with actual unambiguous carrier-phase measurements from a global distribution of permanent receivers. The differences shall be separated into the hardware delays (a receiver constant plus a satellite constant) per data interval, e.g., a day. The condition that these Differential Code Biases (DCBs) are commonly shared throughout the world-wide network of receivers and satellites provides a global character to the assessment. This approach generalizes simple tests based on double differenced Slant Total Electron Contents (STECs) between pairs of satellites and receivers on a much local scale. The present study has been conducted during the entire 2014, i.e., the last Solar Maximum. The seasonal and latitudinal structures of the results clearly reflect the different strategies used by the different models. On one hand, ionospheric model corrections based on a grid (IGS-GIMs or EGNOS) are shown to be several times better than the models

The fractional scaling methodology (FSM) Part 1. methodology development

International Nuclear Information System (INIS)

Novak Zuber; Ivan Catton; Upendra S Rohatgi; Wolfgang Wulff

2005-01-01

Full text of publication follows: a quantitative methodology is developed, based on the concepts of hierarchy and synthesis, to integrate and organize information and data. The methodology uses scaling to synthesize experimental data and analytical results, and to provide quantitative criteria for evaluating the effects of various design and operating parameters that influence processes in a complex system such as a nuclear power plant or a related test facility. Synthesis and scaling are performed on three hierarchical levels: the process, component and system levels. Scaling on the process level determines the effect of a selected process on a particular state variable during a selected scenario. At the component level this scaling determines the effects various processes have on a state variable, and it ranks the processes according to their importance by the magnitude of the fractional change they cause on that state variable. At the system level the scaling determines the governing processes and corresponding components, ranking these in the order of importance according to their effect on the fractional change of system-wide state variables. The scaling methodology reveals on all levels the fractional change of state variables and is called therefore the Fractional Scaling Methodology (FSM). FSM synthesizes process parameters and assigns to each thermohydraulic process a dimensionless effect metric Ω = ωt, that is the product of the specific rate of fractional change ω and the characteristic time t. The rate of fractional change ω is the ratio of process transport rate over content of a preserved quantity in a component. The effect metric Ω quantifies the contribution of the process to the fractional change of a state variable in a given component. Ordering of a component effect metrics provides the hierarchy of processes in a component, then in all components and the system. FSM separates quantitatively dominant from minor processes and components and

Metodología para la evaluación de la relación costo-efectividad en centros de atención primaria de Chile Methodology for evaluating cost-effectiveness in primary health care centers in Chile

Directory of Open Access Journals (Sweden)

Blanca Peñaloza

2010-11-01

Full Text Available OBJETIVO: Presentar una metodología para la evaluación de la relación costo-efectividad en centros de atención primaria de salud (APS a partir del modelo de atención familiar promovido en Chile y evaluar los resultados de los dos primeros años de funcionamiento del primer centro piloto que funciona bajo este nuevo modelo de atención primaria. MÉTODOS. Se realizó un estudio de costo-efectividad, con una perspectiva social y un horizonte temporal de un año. Para comparar el centro intervenido (universitario con el centro de control (municipal se construyó el índice compuesto de calidad de los centros de salud familiar (ICCESFAM, que combina indicadores técnicos y la percepción de los usuarios de los centros en seis dimensiones: accesibilidad, continuidad de la atención médica, enfoque clínico preventivo y promocional, resolutividad, participación, y enfoque biopsicosocial y familiar. Para calcular los costos se tomó en cuenta el gasto en los centros, el ahorro producido al resto del sistema sanitario y el gasto de bolsillo de los pacientes. Se estimó la razón costo-efectividad incremental (RCEI y se realizó un análisis de sensibilidad. RESULTADOS: El centro de salud universitario resultó 13,4% más caro (US$ 8,93 anuales adicionales por inscrito y más efectivo (ICCESFAM 13,3% mayor que el municipal. Estos resultados hacen que la RCEI sea de US$ 0,67 por cada punto porcentual adicional que aumenta el ICCESFAM. CONCLUSIONES: Según el modelo elaborado de evaluación de centros de APS, los centros que siguen el modelo de salud familiar chileno son más efectivos, tanto por sus indicadores técnicos como por la valoración de sus usuarios, que los centros de APS tradicionales.OBJECTIVE: Present a methodology for evaluating cost-effectiveness in primary health care centers (PHCs in Chile based on the family health care model promoted in Chile and evaluate the results of the first two years of operation of the first pilot center

The policy trail methodology

DEFF Research Database (Denmark)

Holford, John; Larson, Anne; Melo, Susana

of ‘policy trail’, arguing that it can overcome ‘methodological nationalism’ and link structure and agency in research on the ‘European educational space’. The ‘trail’ metaphor, she suggests, captures the intentionality and the erratic character of policy. The trail connects sites and brings about change......, but – although policy may be intended to be linear, with specific outcomes – policy often has to bend, and sometimes meets insurmountable obstacles. This symposium outlines and develops the methodology, but also reports on research undertaken within a major FP7 project (LLLIght’in’Europe, 2012-15) which made use......In recent years, the “policy trail” has been proposed as a methodology appropriate to the shifting and fluid governance of lifelong learning in the late modern world (Holford et al. 2013, Holford et al. 2013, Cort 2014). The contemporary environment is marked by multi-level governance (global...

Workshops as a Research Methodology

Science.gov (United States)

Ørngreen, Rikke; Levinsen, Karin

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

A methodology for software documentation

OpenAIRE

Torres Júnior, Roberto Dias; Ahlert, Hubert

2000-01-01

With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

Tourism Methodologies - New Perspectives, Practices and Procedures

DEFF Research Database (Denmark)

This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in differen...... codings and analysis, and tapping into the global network of social media.......This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in different...... in interview and field work situations, and how do we engage with the performative aspects of tourism as a field of study? The book acknowledges that research is also performance and that it constitutes an aspect of intervention in the situations and contexts it is trying to explore. This is an issue dealt...

Development and Validation of Quality Criteria for Providing Patient- and Family-centered Injury Care.

Science.gov (United States)

Boyd, Jamie M; Burton, Rachael; Butler, Barb L; Dyer, Dianne; Evans, David C; Felteau, Melissa; Gruen, Russell L; Jaffe, Kenneth M; Kortbeek, John; Lang, Eddy; Lougheed, Val; Moore, Lynne; Narciso, Michelle; Oxland, Peter; Rivara, Frederick P; Roberts, Derek; Sarakbi, Diana; Vine, Karen; Stelfox, Henry T

2017-08-01

The aim of this study was to develop and evaluate the content validity of quality criteria for providing patient- and family-centered injury care. Quality criteria have been developed for clinical injury care, but not patient- and family-centered injury care. Using a modified Research AND Development Corporation (RAND)/University of California, Los Angeles (UCLA) Appropriateness Methodology, a panel of 16 patients, family members, injury and quality of care experts serially rated and revised criteria for patient- and family-centered injury care identified from patient and family focus groups. The criteria were then sent to 384 verified trauma centers in the United States, Canada, Australia, and New Zealand for evaluation. A total of 46 criteria were rated and revised by the panel over 4 rounds of review producing 14 criteria related to clinical care (n = 4; transitions of care, pain management, patient safety, provider competence), communication (n = 3; information for patients/families; communication of discharge plans to patients/families, communication between hospital and community providers), holistic care (n = 4; patient hygiene, kindness and respect, family access to patient, social and spiritual support) and end-of-life care (n = 3; decision making, end-of-life care, family follow-up). Medical directors, managers, or coordinators representing 254 trauma centers (66% response rate) rated 12 criteria to be important (95% of responses) for patient- and family-centered injury care. Fewer centers rated family access to the patient (80%) and family follow-up after patient death (65%) to be important criteria. Fourteen-candidate quality criteria for patient- and family-centered injury care were developed and shown to have content validity. These may be used to guide quality improvement practices.

USGS Methodology for Assessing Continuous Petroleum Resources

Science.gov (United States)

Charpentier, Ronald R.; Cook, Troy A.

2011-01-01

The U.S. Geological Survey (USGS) has developed a new quantitative methodology for assessing resources in continuous (unconventional) petroleum deposits. Continuous petroleum resources include shale gas, coalbed gas, and other oil and gas deposits in low-permeability ("tight") reservoirs. The methodology is based on an approach combining geologic understanding with well productivities. The methodology is probabilistic, with both input and output variables as probability distributions, and uses Monte Carlo simulation to calculate the estimates. The new methodology is an improvement of previous USGS methodologies in that it better accommodates the uncertainties in undrilled or minimally drilled deposits that must be assessed using analogs. The publication is a collection of PowerPoint slides with accompanying comments.

Qualitative development of eLearning environments through a learner relationship management methodology

Directory of Open Access Journals (Sweden)

Fattaneh Taghiyareh

2013-03-01

Full Text Available Due to paramount importance of knowledge, life-long learning, globalization, and mobility; eLearning as an information technology application has faced rapid growth in recent years. Disseminated war for talent enforces providers of eLearning products to identify technological gaps of learning and provide personalized services for customers of this industry. As we may know, designing customer-centered environments and managing end-user relations are the most effective elements in the market gain, due to the importance of customer satisfaction. The special features of eLearning systems with respect to their centers and users make them appropriate realms for applying a Customer Relationship Management (CRM methodology. Learner Relationship Management (LRM, which is more specialized than CRM in eLearning context, plays a significant role in improving quality of services, enhancing learners’ satisfaction and retention, keeping them, and recruitment new users. LRM provides an integrated infrastructure for eLearning systems and helps them to analyse learners’ capabilities and find the best match to overcome the turbulent environment and tight competition. Also, by improving the service quality and enhancing teaching and learning flows, LRM offers personalized instructions to learners.

Methodology of environmental risk assessment management

Directory of Open Access Journals (Sweden)

Saša T. Bakrač

2012-04-01

Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

Methodological Pluralism and Narrative Inquiry

Science.gov (United States)

Michie, Michael

2013-01-01

This paper considers how the integral theory model of Nancy Davis and Laurie Callihan might be enacted using a different qualitative methodology, in this case the narrative methodology. The focus of narrative research is shown to be on "what meaning is being made" rather than "what is happening here" (quadrant 2 rather than…

Northwest National Marine Renewable Energy Center

Energy Technology Data Exchange (ETDEWEB)

Batten, Belinda [Oregon State Univ., Corvallis, OR (United States); Polagye, Brian [Univ. of Washington, Seattle, WA (United States); LiVecchi, Al [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-06-30

In 2008, the US Department of Energy’s (DOE) Wind and Water Power Program issued a funding opportunity announcement to establish university-led National Marine Renewable Energy Centers. Oregon State University and the University of Washington combined their capabilities in wave and tidal energy to establish the Northwest National Marine Renewable Energy Center, or NNMREC. NNMREC’s scope included research and testing in the following topic areas: • Advanced Wave Forecasting Technologies; • Device and Array Optimization; • Integrated and Standardized Test Facility Development; • Investigate the Compatibility of Marine Energy Technologies with Environment, Fisheries and other Marine Resources; • Increased Reliability and Survivability of Marine Energy Systems; • Collaboration/Optimization with Marine Renewable and Other Renewable Energy Resources. To support the last topic, the National Renewable Energy Laboratory (NREL) was brought onto the team, particularly to assist with testing protocols, grid integration, and testing instrumentation. NNMREC’s mission is to facilitate the development of marine energy technology, to inform regulatory and policy decisions, and to close key gaps in scientific understanding with a focus on workforce development. In this, NNMREC achieves DOE’s goals and objectives and remains aligned with the research and educational mission of universities. In 2012, DOE provided NNMREC an opportunity to propose an additional effort to begin work on a utility scale, grid connected wave energy test facility. That project, initially referred to as the Pacific Marine Energy Center, is now referred to as the Pacific Marine Energy Center South Energy Test Site (PMEC-SETS) and involves work directly toward establishing the facility, which will be in Newport Oregon, as well as supporting instrumentation for wave energy converter testing. This report contains a breakdown per subtask of the funded project. Under each subtask, the following

Poor procedures and quality control among non-affiliated blood centers in Burkina Faso: an argument for expanding the reach of the national blood transfusion center

Science.gov (United States)

Nébié, Koumpingnin; Ouattara, Siaka; Sanou, Mahamoudou; Kientega, Youssouphe; Dahourou, Honorine; Ky, Lassina; Kienou, Kisito; Diallo, Samba; Bigirimana, Françoise; Fretz, Catherine; Murphy, Edward L.; Lefrère, Jean-Jacques

2011-01-01

Introduction The World Health Organization (WHO) recommends the creation of national blood transfusion services. Burkina Faso has a CNTS (Centre national de transfusion sanguine - National Blood Transfusion Center) but it currently covers only 53% of the national blood supply versus 47% produced by independent hospital blood banks. Study design To evaluate blood collection, testing, preparation and prescription practices in the regions of Burkina Faso that are not covered by the CNTS, we conducted a cross-sectional survey. Methodology Data were collected by trained professionals from May to June 2009, at 42 autonomous blood centers not covered by the CNTS. Results Blood collection was supervised in all sites by laboratory technicians without specific training. There was no marketing of community blood donation nor mobile collection. Donation was restricted to replacement (family) donors in 21.4% of sites. Pre-donation screening of donors was performed in 63.4% of sites, but some did not use written questionnaires. Testing for HIV, hepatitis B virus and syphilis was universal, although some sites did not screen for hepatitis C virus. In 83.3% of the sites blood typing was performed without reverse ABO typing. In 97.6% of the sites, nurses acted alone or in conjunction with a physician to order blood transfusions. Conclusion Shortcomings in non-CNTS blood centers argue for the development of a truly national CNTS. Such a national center should coordinate and supervise all blood transfusion activities, and is the essential first step for improving and institutionalizing blood transfusion safety and efficacy in a developing country. PMID:21736582

Spatial Development Modeling Methodology Application Possibilities in Vilnius

Directory of Open Access Journals (Sweden)

Lina Panavaitė

2017-05-01

Full Text Available In order to control the continued development of high-rise buildings and their irreversible visual impact on the overall silhouette of the city, the great cities of the world introduced new methodological principles to city’s spatial development models. These methodologies and spatial planning guidelines are focused not only on the controlled development of high-rise buildings, but on the spatial modelling of the whole city by defining main development criteria and estimating possible consequences. Vilnius city is no exception, however the re-establishment of independence of Lithuania caused uncontrolled urbanization process, so most of the city development regulations emerged as a consequence of unmanaged processes of investors’ expectations legalization. The importance of consistent urban fabric as well as conservation and representation of city’s most important objects gained attention only when an actual threat of overshadowing them with new architecture along with unmanaged urbanization in the city center or urban sprawl at suburbia, caused by land-use projects, had emerged. Current Vilnius’ spatial planning documents clearly define urban structure and key development principles, however the definitions are relatively abstract, causing uniform building coverage requirements for territories with distinct qualities and simplifying planar designs which do not meet quality standards. The overall quality of urban architecture is not regulated. The article deals with current spatial modeling methods, their individual parts, principles, the criteria for quality assessment and their applicability in Vilnius. The text contains an outline of possible building coverage regulations and impact assessment criteria for new development. The article contains a compendium of requirements for high-quality spatial planning and building design.

Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Volume I. Summary

International Nuclear Information System (INIS)

Burwell, C.C.; Reister, D.B.; Rosemarin, C.S.; Sisman, O.; Suffern, J.S.

1976-05-01

A brief summary is presented of the surrogate site concept used to compare the Nuclear Energy Center (NEC) concept with the present method of dispersed siting of nuclear power plants. Included are data on power transmission, environmental considerations, and a discussion of a site selection methodology

Between Community Spaces: Squares of Minor Centers of Calabria

Directory of Open Access Journals (Sweden)

Mauro Francini

2017-08-01

Full Text Available The theme of open “community spaces” in recent years has to the development of important interdisci­plinary issues. Nevertheless, the reading of smaller towns, in urbanistic, historical-anthropological and geographical terms appears less extended, considering the declination of public spaces as "squares." Starting from this declension we would like to introduce the first results of a research. The research had the aim of (reinterpreting the particular characteristics of these areas in specific areas such as small towns, using the region of Calabria for the case of analytic application. These communities have diverse and stratified living cultures, altered by settlement processes that have triggered two different types of urban contexts. The former often lead either to urban areas in depopulated decay or, in contrast, in places of memories: empty containers of relationships, sterile and crystallized museum objects, reduced to scenarios on which passing groups of visitors move necessarily from those realities. The latter often encircle primitive nuclei, asphyxiating them, or characterizing the so-called "dual" or "satellites" towns, completely detached from the original urban center in which all public functions are decentralized. The applied methodology is based on the reading of the historical-functional evolution of squares by the identification of codified compositional criteria. Through this research we seek to verify how urban planning, in synergy with other disciplines, can define processes of regeneration aimed at restoring the meaning of "center", and thus of an urban-community reference center.

IMSF: Infinite Methodology Set Framework

Science.gov (United States)

Ota, Martin; Jelínek, Ivan

Software development is usually an integration task in enterprise environment - few software applications work autonomously now. It is usually a collaboration of heterogeneous and unstable teams. One serious problem is lack of resources, a popular result being outsourcing, ‘body shopping’, and indirectly team and team member fluctuation. Outsourced sub-deliveries easily become black boxes with no clear development method used, which has a negative impact on supportability. Such environments then often face the problems of quality assurance and enterprise know-how management. The used methodology is one of the key factors. Each methodology was created as a generalization of a number of solved projects, and each methodology is thus more or less connected with a set of task types. When the task type is not suitable, it causes problems that usually result in an undocumented ad-hoc solution. This was the motivation behind formalizing a simple process for collaborative software engineering. Infinite Methodology Set Framework (IMSF) defines the ICT business process of adaptive use of methods for classified types of tasks. The article introduces IMSF and briefly comments its meta-model.

Demonstration of an infiltration evaluation methodology

International Nuclear Information System (INIS)

Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

1990-07-01

An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

Web-Enhanced General Chemistry Increases Student Completion Rates, Success, and Satisfaction

Science.gov (United States)

Amaral, Katie E.; Shank, John D.; Shibley, Ivan A., Jr.; Shibley, Lisa R.

2013-01-01

General Chemistry I historically had one of the highest failure and withdrawal rates at Penn State Berks, a four-year college within the Penn State system. The course was completely redesigned to incorporate more group work, the use of classroom response systems, peer mentors, and a stronger online presence via the learning management system…

Methodologies for certification of transuranic waste packages

International Nuclear Information System (INIS)

Christensen, R.N.; Kok, K.D.

1980-10-01

The objective of this study was to postulate methodologies for certification that a waste package is acceptable for disposal in a licensed geologic repository. Within the context of this report, certification means the overall process which verifies that a waste package meets the criteria or specifications established for acceptance for disposal in a repository. The overall methodology for certification will include (1) certifying authorities, (2) tests and procedures, and (3) documentation and quality assurance programs. Each criterion will require a methodology that is specific to that criterion. In some cases, different waste forms will require a different methodology. The purpose of predicting certification methodologies is to provide additional information as to what changes, if any, are needed for the TRU waste in storage

Identification of tasks of maintenance centered in the reliability; Identificacion de tareas de mantenimiento centrado en la confiabilidad

Energy Technology Data Exchange (ETDEWEB)

Torres V, A.; Rivero O, J.J. [Dpto. Ingenieria Nuclear, Instituto Superior de Tecnologias y Ciencias Aplicadas, Ave. Salvador Allende y Luaces, Quinta de los Molinos, Plaza, Ciudad Habana (Cuba)]. e-mail: atorres@fctn.isctn.edu.cu

2004-07-01

The methodology of Reliability Centered Maintenance (RCM) it has become, after the discovery of their advantages, an objective of many industrial facilities to optimize their maintenance. However, diverse subjective factors affect the determination of the parameters (technical of predictive to apply and times among interventions) that characterize the tasks of RCM. A method to determine the monitoring tasks at condition and the times more recommended for to apply the monitoring by time and the search of faults, with focus in system. This methodology has been computerized inside the code MOSEG Win Ver 1.0. The same has been applied with success to the determination of tasks of RCM in industrial objectives. (Author)

Managerial Methodology in Public Institutions

Directory of Open Access Journals (Sweden)

Ion VERBONCU

2010-10-01

Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

The structuralist tradition in economics: methodological and macroeconomics aspects

Directory of Open Access Journals (Sweden)

FABRÍCIO MISSIO

2015-06-01

Full Text Available This paper examines the structuralist tradition in economics, emphasizing the role that structures play in the economic growth of developing countries. Since the subject at hand is evidently too large to cover in a single article, an emphasis has been brought to bear upon the macroeconomic elements of such a tradition, while also exploring its methodological aspects. It begins by analysing some general aspects of structuralism in economics (its evolution and origins associated with ECLAC thought, in this instance focusing on the dynamics of the center-periphery relationship. Thereafter, the macroeconomic structuralism derived from the works of Taylor (1983, 1991 is presented, followed by a presentation of neo-structuralism. Centred on the concept of systemic competitiveness, this approach defines a strategy to achieve the high road of globalization, understood here as an inevitable process in spite of its engagement being dependent on the policies adopted. The conclusions show the genuine contributions of this tradition to economic theory.

Computational optimization of biodiesel combustion using response surface methodology

Directory of Open Access Journals (Sweden)

Ganji Prabhakara Rao

2017-01-01

Full Text Available The present work focuses on optimization of biodiesel combustion phenomena through parametric approach using response surface methodology. Physical properties of biodiesel play a vital role for accurate simulations of the fuel spray, atomization, combustion, and emission formation processes. Typically methyl based biodiesel consists of five main types of esters: methyl palmitate, methyl oleate, methyl stearate, methyl linoleate, and methyl linolenate in its composition. Based on the amount of methyl esters present the properties of pongamia bio-diesel and its blends were estimated. CONVERGETM computational fluid dynamics software was used to simulate the fuel spray, turbulence and combustion phenomena. The simulation responses such as indicated specific fuel consumption, NOx, and soot were analyzed using design of experiments. Regression equations were developed for each of these responses. The optimum parameters were found out to be compression ratio – 16.75, start of injection – 21.9° before top dead center, and exhaust gas re-circulation – 10.94%. Results have been compared with baseline case.

A methodology for social experimentation

DEFF Research Database (Denmark)

Ravn, Ib

A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations......A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations...

Advanced Methodologies for NASA Science Missions

Science.gov (United States)

Hurlburt, N. E.; Feigelson, E.; Mentzel, C.

2017-12-01

Most of NASA's commitment to computational space science involves the organization and processing of Big Data from space-based satellites, and the calculations of advanced physical models based on these datasets. But considerable thought is also needed on what computations are needed. The science questions addressed by space data are so diverse and complex that traditional analysis procedures are often inadequate. The knowledge and skills of the statistician, applied mathematician, and algorithmic computer scientist must be incorporated into programs that currently emphasize engineering and physical science. NASA's culture and administrative mechanisms take full cognizance that major advances in space science are driven by improvements in instrumentation. But it is less well recognized that new instruments and science questions give rise to new challenges in the treatment of satellite data after it is telemetered to the ground. These issues might be divided into two stages: data reduction through software pipelines developed within NASA mission centers; and science analysis that is performed by hundreds of space scientists dispersed through NASA, U.S. universities, and abroad. Both stages benefit from the latest statistical and computational methods; in some cases, the science result is completely inaccessible using traditional procedures. This paper will review the current state of NASA and present example applications using modern methodologies.

Application of agile methodologies in software development

Directory of Open Access Journals (Sweden)

Jovanović Aca D.

2016-01-01

Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

Clinical trial methodology

National Research Council Canada - National Science Library

Peace, Karl E; Chen, Ding-Geng

2011-01-01

"Now viewed as its own scientific discipline, clinical trial methodology encompasses the methods required for the protection of participants in a clinical trial and the methods necessary to provide...

THE FUTURE OF LANGUAGE TEACHING METHODOLOGY

OpenAIRE

Ted Rodgers

1998-01-01

Abstract : This paper reviews the current state of ELT methodology, particulary in respect to a number of current views suggesting that the profession is now in a "post-methods" era in which previous attention to Methods (Total Physical Response, Silent Way, Natural Approach, etc.) has given way to a more generic approach to ELT methodology. Ten potential future courses of ELT methodology are outlines and three of these are considered in some detail. Particular consideration is given as to ho...

Assessing a Methodological Proposal for the Design, Creation and Evaluation of Learning Objects Oriented to Educators with Diverse Educational and Technological Competencies

Directory of Open Access Journals (Sweden)

Jorge J. Maldonado

2016-04-01

Full Text Available This paper describes a methodological proposal for the design, creation and evaluation of Learning Objects (LOs. This study arises from the compilation and analysis of several LO design methodologies currently used in Ibero-America. This proposal, which has been named DICREVOA, defines five different phases: analysis, design (instructional and multimedia, implementation (LO and metadata, evaluation (from the perspective of both the producer and the consumer of the LO, and publishing. The methodology focuses not only on the teaching inexperienced, but also on those having a basic understanding of the technological and educational aspects related to LO design; therefore, the study emphasizes LO design activities centered around the Kolb cycle and the use of the ExeLearning tool in order to implement the LO core. Additionally, DICREVOA was used in a case study, which demonstrates how it provides a feasible mechanism for LO design and implementation withindifferent contexts. Finally, DICREVOA, the case study to which it was applied, and the results obtained are presented.

Reliability Centered Maintenance for Savannah River Site's interim waste management facilities

Energy Technology Data Exchange (ETDEWEB)

Hauer, K.A. (Westinghouse Savannah River Co., Aiken, SC (United States)); Wilson, J.F. (PRC, Inc. (US))

1992-01-01

The application of Reliability Centered Maintenance (RCM) has been shown to be an effective means to optimize maintenance programs or to establish new programs. The key to success of any RCM program is to customize the methodology to meet the specific needs of the implementing organization. This paper discusses how RCM is being used to establish the preventive maintenance program and how the resulting system data is being used to support the Technical Baseline reconstitution effort for the interim Waste Management Division of Westinghouse Savannah River Company (WSRC).

Status of the Polar Engineering Development Center's (PEDC) Open-Closed Boundary Synoptic Nowcast

Science.gov (United States)

Gerrard, A. J.; Kim, H.

2017-12-01

We present the most recent Polar Engineering Development Center (PEDC) developments, specifically the first magnetic-field open-closed boundary (OCB) determination scheme. This scheme is implemented in "near real time" and utilizes data from an array of fluxgate magnetometers that are distributed across the high Antarctic plateau, as per Urban et al. [2012]. This OCB determination enables a high-latitude, synoptic measure of space weather variability that provides for more regional determinations of particle precipitation and related impacts. This methodology therefore supplements exciting "index-based" or empically-based space weather nowcasts currently in use.

Phoenix – A model-based Human Reliability Analysis methodology: Qualitative Analysis Procedure

International Nuclear Information System (INIS)

Ekanem, Nsimah J.; Mosleh, Ali; Shen, Song-Hua

2016-01-01

Phoenix method is an attempt to address various issues in the field of Human Reliability Analysis (HRA). Built on a cognitive human response model, Phoenix incorporates strong elements of current HRA good practices, leverages lessons learned from empirical studies, and takes advantage of the best features of existing and emerging HRA methods. Its original framework was introduced in previous publications. This paper reports on the completed methodology, summarizing the steps and techniques of its qualitative analysis phase. The methodology introduces the “Crew Response Tree” which provides a structure for capturing the context associated with Human Failure Events (HFEs), including errors of omission and commission. It also uses a team-centered version of the Information, Decision and Action cognitive model and “macro-cognitive” abstractions of crew behavior, as well as relevant findings from cognitive psychology literature and operating experience, to identify potential causes of failures and influencing factors during procedure-driven and knowledge-supported crew-plant interactions. The result is the set of identified HFEs and likely scenarios leading to each. The methodology itself is generic in the sense that it is compatible with various quantification methods, and can be adapted for use across different environments including nuclear, oil and gas, aerospace, aviation, and healthcare. - Highlights: • Produces a detailed, consistent, traceable, reproducible and properly documented HRA. • Uses “Crew Response Tree” to capture context associated with Human Failure Events. • Models dependencies between Human Failure Events and influencing factors. • Provides a human performance model for relating context to performance. • Provides a framework for relating Crew Failure Modes to its influencing factors.

Seismic Response and Evaluation of SDOF Self-Centering Friction Damping Braces Subjected to Several Earthquake Ground Motions

Directory of Open Access Journals (Sweden)

Jong Wan Hu

2015-01-01

Full Text Available This paper mainly deals with seismic response and performance for self-centering friction damping braces (SFDBs subjected to several maximum- or design-leveled earthquake ground motions. The self-centering friction damping brace members consist of core recentering components fabricated with superelastic shape memory alloy wires and energy dissipation devices achieved through shear friction mechanism. As compared to the conventional brace members for use in the steel concentrically braced frame structure, these self-centering friction damping brace members make the best use of their representative characteristics to minimize residual deformations and to withstand earthquake loads without member replacement. The configuration and response mechanism of self-centering friction damping brace systems are firstly described in this study, and then parametric investigations are conducted through nonlinear time-history analyses performed on numerical single degree-of-freedom spring models. After observing analysis results, adequate design methodologies that optimally account for recentering capability and energy dissipation according to their comparative parameters are intended to be suggested in order to take advantage of energy capacity and to minimize residual deformation simultaneously.

The Center for Natural Phenomena Engineering (CNPE), 1990--1991

Energy Technology Data Exchange (ETDEWEB)

None

1992-07-01

The Center for Natural Phenomena Engineering (CNPE) was established to provide a natural phenomena (NP) engineering oversight role within Martin Marietta Energy Systems, Inc. (MMES). In this oversight role CNPE`s goals are to provide coordination and direction of activities related to earthquake and other natural phenomena engineering, including development of hazard definition, development of design criteria, conducting new facility design, development and conducting of testing, performance of analysis and vulnerability studies, development of analysis methodology, and provision of support for preparation of safety analysis reports for the five MMES sites. In conducting these activities it is CNPE`s goal to implement the elements of Total Quality Management (TQM) in a cost-effective manner, providing its customers with a quality product. This report describes 1990--1991 activities.

The Center for Natural Phenomena Engineering (CNPE), 1990--1991

International Nuclear Information System (INIS)

1992-07-01

The Center for Natural Phenomena Engineering (CNPE) was established to provide a natural phenomena (NP) engineering oversight role within Martin Marietta Energy Systems, Inc. (MMES). In this oversight role CNPE's goals are to provide coordination and direction of activities related to earthquake and other natural phenomena engineering, including development of hazard definition, development of design criteria, conducting new facility design, development and conducting of testing, performance of analysis and vulnerability studies, development of analysis methodology, and provision of support for preparation of safety analysis reports for the five MMES sites. In conducting these activities it is CNPE's goal to implement the elements of Total Quality Management (TQM) in a cost-effective manner, providing its customers with a quality product. This report describes 1990--1991 activities

Harold and Kumar Go to the Ivy League

Science.gov (United States)

Oppenheimer, Mark

2008-01-01

For having achieved a mild cult status after doing the movie "Harold & Kumar Go to White Castle," lead actors John Cho and Kal Penn deserve their fame, their million-dollar paychecks, and their groupies. Do they deserve Ivy League teaching jobs? This spring Penn (whose real name is Kalpen Modi) taught a large lecture class, "Images of Asian…

"Let's stick together"--a grounded theory exploration of interprofessional working used to provide person centered chronic back pain services.

Science.gov (United States)

Howarth, Michelle; Warne, Tony; Haigh, Carol

2012-11-01

Chronic back pain is a global phenomenon and a common reason why patients seek help from health professionals. Person-centered interprofessional working is acknowledged as the main strategy for chronic back pain management; however, the complexity of chronic pain can present significant challenges for teams. Although methods used by interprofessional teams to collaborate have been previously explored, how they work together to deliver person-centered chronic back pain care has received limited attention. The aim of this study was to explore person-centered care from the perspectives of people with chronic back pain and the interprofessional teams who cared for them. A grounded theory methodology was used to capture the interprofessional team's perspectives of person-centered working. A purposive sample of four chronic back pain management teams participated in semi-structured face-to-face interviews and focus groups. Data were thematically analyzed using a constant comparative method. Three categories emerged, collective efficacy, negotiated space and team maturity, which illustrated the attributes of interprofessional teams that influenced person-centered working. The findings suggest that collective efficacy matures over time within a negotiated coalesced space and re-enforces the need for teams to stick together to ensure effective person-centered care.

GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Z.N. Varlamova

2007-06-01

Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

[Review of the gender research in cross-cultural psychology since 1990: conceptual definitions and methodology].

Science.gov (United States)

Suzuki, Atsuko

2004-06-01

A review of the cross-cultural research on gender in psychology since 1990 reveals (1) conceptual confusion of the definitions of sex, gender, man, and woman; (2) diversification, refinement, reification, and a problem-solving orientation in the research topics; and (3) the possibility of the elucidation of the psychological sex-difference mechanism in relation to the biological sex differences. A comparison of 1990 and 2000 cross-cultural psychological articles published in "Sex Roles" found that overall, the research is Western-centered and some methodological problems remain to be solved concerning the measures and the sampling. These findings lead to the following suggestions for cross-cultural research on gender to resolve the problems and contribute to the development of psychology in general: (1) use of an operational definition for conceptual equivalence; (2) conducting more etic-approach research; (3) avoiding ethnocentric or androcentric research attitudes; (4) use of a theoretical framework; (5) strict examination of methodologies; and (6) examination of the specific context of participants in terms of cultural diversity, dynamics of husband-wife relationships, and relationships with husbands and fathers.

Changing methodologies in TESOL

CERN Document Server

Spiro, Jane

2013-01-01

Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

Chapter three: methodology of exposure modeling

CSIR Research Space (South Africa)

Moschandreas, DJ

2002-12-01

Full Text Available methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate...

Planning and Management of Technology Deployment Center

International Nuclear Information System (INIS)

Park, Jae Won; Joo, Po Kook; Kim, Jun Yeon and others

2005-08-01

The R and D contents are summarized as follows ; Models were set-up for transferring the developed technologies to the industry and managing technology deployment center to vitalize the commercialization and then the set-up model was tried to apply for transferring technologies for commercialization and to define interfaces between the R and D and industrial applications In this project, new products and processes were developed for promoting the commercialization. Infra-structures were firmly set-up for the venture company promotion and technology deployment developed during executing the proton Engineering frontier Project. Commercialization methodology connection with industrial companies were studied by outside specializing institute. Development of gem-stone coloring and new photo catalyst producing techniques are very high value-adding technologies, therefore, experimental and theoretical R and D were transacted simultaneously to obtain the originality of the technology. The theoretical R and D was committed to a specialist outside

Methodological approaches in the research of organizational culture

Directory of Open Access Journals (Sweden)

Janićijević Nebojša

2011-01-01

Full Text Available In the thirty-years-long research of organizational culture, two mutually opposed methodological approaches have emerged: objectivistic quantitative and subjectivistic-qualitative. These two approaches are based on opposite ontological and epistemological assumptions: they include different types of research, and use opposite, quantitative vs. qualitative, methods of research. Each of the methodological approaches has its advantages and disadvantages. For this reason a hybrid approach emerges as a legitimate choice in organizational culture research methodology. It combines elements of both subjectivistic and objectivistic methodological approaches, according to the goals, content, and context of the research and preferences of the researcher himself/herself. Since it is possible to combine the two principal methodological approaches in various ways, there are several possible hybrid methodologies in organizational culture research. After the review of objectivistic quantitative and subjectivistic-qualitative methodological approaches, one of possible hybrid approaches in the research of organizational culture is presented in this paper.

Applied high-speed imaging for the icing research program at NASA Lewis Research Center

Science.gov (United States)

Slater, Howard; Owens, Jay; Shin, Jaiwon

1992-01-01

The Icing Research Tunnel at NASA Lewis Research Center provides scientists a scaled, controlled environment to simulate natural icing events. The closed-loop, low speed, refrigerated wind tunnel offers the experimental capability to test for icing certification requirements, analytical model validation and calibration techniques, cloud physics instrumentation refinement, advanced ice protection systems, and rotorcraft icing methodology development. The test procedures for these objectives all require a high degree of visual documentation, both in real-time data acquisition and post-test image processing. Information is provided to scientific, technical, and industrial imaging specialists as well as to research personnel about the high-speed and conventional imaging systems will be on the recent ice protection technology program. Various imaging examples for some of the tests are presented. Additional imaging examples are available from the NASA Lewis Research Center's Photographic and Printing Branch.

Hanford Site baseline risk assessment methodology

International Nuclear Information System (INIS)

1993-03-01

This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

Health Extension in New Mexico: An Academic Health Center and the Social Determinants of Disease

Science.gov (United States)

Kaufman, Arthur; Powell, Wayne; Alfero, Charles; Pacheco, Mario; Silverblatt, Helene; Anastasoff, Juliana; Ronquillo, Francisco; Lucero, Ken; Corriveau, Erin; Vanleit, Betsy; Alverson, Dale; Scott, Amy

2010-01-01

The Agricultural Cooperative Extension Service model offers academic health centers methodologies for community engagement that can address the social determinants of disease. The University of New Mexico Health Sciences Center developed Health Extension Rural Offices (HEROs) as a vehicle for its model of health extension. Health extension agents are located in rural communities across the state and are supported by regional coordinators and the Office of the Vice President for Community Health at the Health Sciences Center. The role of agents is to work with different sectors of the community in identifying high-priority health needs and linking those needs with university resources in education, clinical service and research. Community needs, interventions, and outcomes are monitored by county health report cards. The Health Sciences Center is a large and varied resource, the breadth and accessibility of which are mostly unknown to communities. Community health needs vary, and agents are able to tap into an array of existing health center resources to address those needs. Agents serve a broader purpose beyond immediate, strictly medical needs by addressing underlying social determinants of disease, such as school retention, food insecurity, and local economic development. Developing local capacity to address local needs has become an overriding concern. Community-based health extension agents can effectively bridge those needs with academic health center resources and extend those resources to address the underlying social determinants of disease. PMID:20065282

Linear associations between clinically assessed upper motor neuron disease and diffusion tensor imaging metrics in amyotrophic lateral sclerosis.

Science.gov (United States)

Woo, John H; Wang, Sumei; Melhem, Elias R; Gee, James C; Cucchiara, Andrew; McCluskey, Leo; Elman, Lauren

2014-01-01

To assess the relationship between clinically assessed Upper Motor Neuron (UMN) disease in Amyotrophic Lateral Sclerosis (ALS) and local diffusion alterations measured in the brain corticospinal tract (CST) by a tractography-driven template-space region-of-interest (ROI) analysis of Diffusion Tensor Imaging (DTI). This cross-sectional study included 34 patients with ALS, on whom DTI was performed. Clinical measures were separately obtained including the Penn UMN Score, a summary metric based upon standard clinical methods. After normalizing all DTI data to a population-specific template, tractography was performed to determine a region-of-interest (ROI) outlining the CST, in which average Mean Diffusivity (MD) and Fractional Anisotropy (FA) were estimated. Linear regression analyses were used to investigate associations of DTI metrics (MD, FA) with clinical measures (Penn UMN Score, ALSFRS-R, duration-of-disease), along with age, sex, handedness, and El Escorial category as covariates. For MD, the regression model was significant (p = 0.02), and the only significant predictors were the Penn UMN Score (p = 0.005) and age (p = 0.03). The FA regression model was also significant (p = 0.02); the only significant predictor was the Penn UMN Score (p = 0.003). Measured by the template-space ROI method, both MD and FA were linearly associated with the Penn UMN Score, supporting the hypothesis that DTI alterations reflect UMN pathology as assessed by the clinical examination.

Methodology for performing surveys for fixed contamination

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1994-10-01

This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

Photovoltaic module energy rating methodology development

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

1996-05-01

A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

GO methodology. Volume 1. Overview manual

International Nuclear Information System (INIS)

1983-06-01

The GO methodology is a success-oriented probabilistic system performance analysis technique. The methodology can be used to quantify system reliability and availability, identify and rank critical components and the contributors to system failure, construct event trees, and perform statistical uncertainty analysis. Additional capabilities of the method currently under development will enhance its use in evaluating the effects of external events and common cause failures on system performance. This Overview Manual provides a description of the GO Methodology, how it can be used, and benefits of using it in the analysis of complex systems

Determination of self shielding factors and gamma attenuation effects for tree ring samples

International Nuclear Information System (INIS)

Dagistan Sahin; Kenan Uenlue

2012-01-01

Determination of tree ring chemistry using Neutron Activation Analysis (NAA) is part of an ongoing research between Penn State University (PSU) and Cornell University, The Malcolm and Carolyn Wiener Laboratory for Aegean and Near Eastern Dendrochronology. Tree-ring chemistry yields valuable data for environmental event signatures. These signatures are a complex function of elemental concentration. To be certain about concentration of signature elements, it is necessary to perform the measurements and corrections with the lowest error and maximum accuracy possible. Accurate and precise values of energy dependent neutron flux at dry irradiation tubes and detector efficiency for tree ring sample are calculated for Penn State Breazeale Reactor (PSBR). For the calculation of energy dependent and self shielding corrected neutron flux, detailed model of the TRIGA Mark III reactor at PSU with updated fuel compositions was prepared using the MCNP utility for reactor evolution (MURE) libraries. Dry irradiation tube, sample holder and sample were also included in the model. The thermal flux self-shielding correction factors due to the sample holder and sample for were calculated and verified with previously published values. The Geant-4 model of the gamma spectroscopy system, developed at Radiation Science and Engineering Center (RSEC), was improved and absolute detector efficiency for tree-ring samples was calculated. (author)

A mission to Mercury and a mission to the moons of Mars

Science.gov (United States)

1993-07-01

Two Advanced Design Projects were completed this academic year at Penn State - a mission to the planet Mercury and a mission to the moons of Mars (Phobos and Deimos). At the beginning of the fall semester the students were organized into six groups and given their choice of missions. Once a mission was chosen, the students developed conceptual designs. These designs were then evaluated at the end of the fall semester and combined into two separate mission scenarios. To facilitate the work required for each mission, the class was reorganized in the spring semester by combining groups to form two mission teams. An integration team consisting of two members from each group was formed for each mission team so that communication and exchange of information would be easier among the groups. The types of projects designed by the students evolved from numerous discussions with Penn State faculty and mission planners at the Lewis Research Center Advanced Projects Office. Robotic planetary missions throughout the solar system can be considered valuable precursors to human visits and test beds for innovative technology. For example, by studying the composition of the Martian moons, scientists may be able to determine if their resources may be used or synthesized for consumption during a first human visit.

The Precarious Question of Black Cultural Centers Versus Multicultural Centers.

Science.gov (United States)

Princes, Carolyn D. W.

This paper discusses the role of black cultural centers on university campuses, focusing on whether black cultural centers or multicultural centers best meet the needs of an increasingly diverse student body and society. It examines the historical role of black cultural centers as vehicles to promote educational opportunity, student retention, and…

[Study of the work and of working in Family Health Care Support Center].

Science.gov (United States)

Lancman, Selma; Gonçalves, Rita Maria de Abreu; Cordone, Nicole Guimarães; Barros, Juliana de Oliveira

2013-10-01

To understand the organization of and the working conditions in family health care support centers, as well as subjective experiences related to work in two of these centers. This was a case study carried out during 2011 and 2012 in two family health care support centers in Sao Paulo, Southeastern Brazil. Data were collected and analyzed using two theoretical-methodological references from ergonomics and work psychodynamics influenced, respectively, by ergonomic work analysis, developed based on open observations of a variety of tasks and on interviews and in practice in work psychodynamics, carried out using think tanks about the work. The work of the Family Health Care Support Centers in question is constituted on the bases of complex, diversified actions to be shared among the various professionals and teams involved. Innovative technological tools, which are not often adopted by primary health care professionals, are used and the parameters and productivity measures do not encompass the specificity and the complexity of the work performed. These situations require constant organizational rearrangement, especially between the Family Health Care Support Centers and the Family Health Care Teams, causing difficulties in carrying out the work as well as in constituting the identity of the professionals studied. The study attempts to lend greater visibility to the work processes at the Family Health Care Support Centers in order to contribute to advances in public policy on primary healthcare. It is important to stress that introducing changes at work, which affect both its organization and work conditions, is above all a commitment, which to be effective, must be permanent and must involve the different levels of hierarchy.

A methodology for developing distributed programs

NARCIS (Netherlands)

Ramesh, S.; Mehndiratta, S.L.

1987-01-01

A methodology, different from the existing ones, for constructing distributed programs is presented. It is based on the well-known idea of developing distributed programs via synchronous and centralized programs. The distinguishing features of the methodology are: 1) specification include process

Análise da sensibilidade da metodologia dos centros de custos mediante a introdução de tecnologias em um sistema de produção de cria Analysis of the methodology sensibility of cost centers facing the introduction of technologies in a cow-calf production system

Directory of Open Access Journals (Sweden)

Ricardo Pedroso Oaigen

2009-06-01

Full Text Available Um modelo de simulação bioeconômico foi desenvolvido em um sistema de produção tradicional em pecuária de cria (SPT para a aplicação da metodologia dos centros de custos com o objetivo de avaliar sua sensibilidade mediante a introdução de tecnologias de desmame precoce em vacas primíparas (SDP, campo melhorado para vacas primíparas e metade do lote das vacas secundíparas (SCM e suplementação protéica para novilhas de reposição (SSP destinadas a aumentar a taxa de prenhez neste sistema (SPT. As informações do desempenho biológico foram obtidas por meio de revisão bibliográfica sobre os indicadores de produção e os dados econômicos e de custos foram obtidos a partir de valores de mercado. As entradas do modelo foram: estrutura do rebanho; custos de produção; e tecnologias de produção. As saídas do modelo foram: custo operacional (CO; custo de desembolso (CD; custo de produção por centro (CPC; custo unitário por bezerro (CUB; custo por quilo desmamado (C/kg; custo anual por vaca (CAV; ponto de equilíbrio financeiro (PEF, margem operacional (MO, taxa de prenhez (TP, taxa de desmame (TD, produtividade/vaca (Pr, número de bezerros desmamados (NBD, ponto de equilíbrio em bezerros (PEB e produção total em quilos (PT. A utilização da metodologia dos centros de custos se mostrou sensível ao identificar variações nos indicadores técnicos e econômicos e nos custos de cada centro produtivo. A introdução do SDP, SCM e SSP melhorou os indicadores técnicos e a margem operacional e, ao mesmo tempo, apresentou relação direta com as variações nos centros de custo, comprovando a sensibilidade da metodologia de custeio em relação ao impacto no SPT.A bioeconomical simulation model was developed in a traditional cow-calf production system (TPS for the application of cost center methodology with the objective of evaluating its sensibility by the introduction of early weaning technologies in primiparous cows (EWS

The NLC Software Requirements Methodology

Energy Technology Data Exchange (ETDEWEB)

Shoaee, Hamid

2002-08-20

We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

A new Methodology for Operations Strategy

DEFF Research Database (Denmark)

Koch, Christian; Rytter, Niels Gorm; Boer, Harry

2005-01-01

This paper proposes a new methodology for developing and implementing Operations Strategy (OS). It encompasses both content and process aspects of OS and differs thereby from many of the present OS methodologies. The paper outlines its paradigmatic foundation and presents aim, process, dimensions...

Causal Meta-Analysis : Methodology and Applications

NARCIS (Netherlands)

Bax, L.J.

2009-01-01

Meta-analysis is a statistical method to summarize research data from multiple studies in a quantitative manner. This dissertation addresses a number of methodological topics in causal meta-analysis and reports the development and validation of meta-analysis software. In the first (methodological)

Probabilistic methodology for turbine missile risk analysis

International Nuclear Information System (INIS)

Twisdale, L.A.; Dunn, W.L.; Frank, R.A.

1984-01-01

A methodology has been developed for estimation of the probabilities of turbine-generated missile damage to nuclear power plant structures and systems. Mathematical models of the missile generation, transport, and impact events have been developed and sequenced to form an integrated turbine missile simulation methodology. Probabilistic Monte Carlo techniques are used to estimate the plant impact and damage probabilities. The methodology has been coded in the TURMIS computer code to facilitate numerical analysis and plant-specific turbine missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and probabilities have been estimated for a hypothetical nuclear power plant case study. (orig.)

Creativity in phenomenological methodology

DEFF Research Database (Denmark)

Dreyer, Pia; Martinsen, Bente; Norlyk, Annelise

2014-01-01

on the methodologies of van Manen, Dahlberg, Lindseth & Norberg, the aim of this paper is to argue that the increased focus on creativity and arts in research methodology is valuable to gain a deeper insight into lived experiences. We illustrate this point through examples from empirical nursing studies, and discuss......Nursing research is often concerned with lived experiences in human life using phenomenological and hermeneutic approaches. These empirical studies may use different creative expressions and art-forms to describe and enhance an embodied and personalised understanding of lived experiences. Drawing...... may support a respectful renewal of phenomenological research traditions in nursing research....

Constructivism: a naturalistic methodology for nursing inquiry.

Science.gov (United States)

Appleton, J V; King, L

1997-12-01

This article will explore the philosophical underpinnings of the constructivist research paradigm. Despite its increasing popularity in evaluative health research studies there is limited recognition of constructivism in popular research texts. Lincoln and Guba's original approach to constructivist methodology is outlined and a detailed framework for nursing research is offered. Fundamental issues and concerns surrounding this methodology are debated and differences between method and methodology are highlighted.

Verification of Fault Tree Models with RBDGG Methodology

International Nuclear Information System (INIS)

Kim, Man Cheol

2010-01-01

Currently, fault tree analysis is widely used in the field of probabilistic safety assessment (PSA) of nuclear power plants (NPPs). To guarantee the correctness of fault tree models, which are usually manually constructed by analysts, a review by other analysts is widely used for verifying constructed fault tree models. Recently, an extension of the reliability block diagram was developed, which is named as RBDGG (reliability block diagram with general gates). The advantage of the RBDGG methodology is that the structure of a RBDGG model is very similar to the actual structure of the analyzed system and, therefore, the modeling of a system for a system reliability and unavailability analysis becomes very intuitive and easy. The main idea of the development of the RBDGG methodology is similar to that of the development of the RGGG (Reliability Graph with General Gates) methodology. The difference between the RBDGG methodology and RGGG methodology is that the RBDGG methodology focuses on the block failures while the RGGG methodology focuses on the connection line failures. But, it is also known that an RGGG model can be converted to an RBDGG model and vice versa. In this paper, a new method for the verification of the constructed fault tree models using the RBDGG methodology is proposed and demonstrated

Teaching - methodical and research center of hydrogen power engineering and platinum group metals in the former Soviet Union countries

International Nuclear Information System (INIS)

Evdokimov, A.A; Sigov, A.S; Shinkarenko, V.V.

2005-01-01

Full text: Teaching - Methodical and Research Center (TMRC) 'Sokolinaja Gora' is founded in order to provide methodical-information and scientific support of institutes of higher education in the field of hydrogen power engineering and platinum group metals in Russia and in the countries of the Former Soviet union. It is independent association of creative communities of scientist of higher educational specialists. The main directions of the Center activity are: 1. Teaching-methodological support and development of teaching in the field of hydrogen power engineering and platinum group metals in Russia in the countries of the Former Soviet Union. Themes of teaching includes the basic of safe using of hydrogen technologies and devices, ecological, economic and law aspects of new hydrogen power engineering, transition to which in 21 century is one of the central problems of mankind survival; 2. Organizing of joint researches by independent creative communities of scientists in the field of hydrogen power engineering and platinum group metal; 3. Independent scientific examination, which is made by Advisory Committee of High Technologies consisting of representatives of the countries of Former Soviet Union, which are standing participants of an Annual International Symposia 'Hydrogen Power Engineering and Platinum Group Metals in the Former Soviet Union Countries'. Structure of the Center: 1. Center of strategic development in the field of high technologies; 2. Scientific Research Institute of Hydrogen Power Engineering and Platinum Group Metals; 3. Teaching-Methodical Association in specialization 'Hydrogen Power Engineering and economics' and hydrogen wide spread training; 4. Media Center 'Hydrogen Power Engineering and Platinum Group Metals', 5. Organizational Center; 6. Administrative Center. The Center will be established step-by-step in 2005-2010 on the basis of the following programs: Teaching-methodological program. On the basis of this program it is planned to

Design Methodologies: Industrial and Educational Applications

NARCIS (Netherlands)

Tomiyama, T.; Gul, P.; Jin, Y.; Lutters, Diederick; Kind, Ch.; Kimura, F.

2009-01-01

The field of Design Theory and Methodology has a rich collection of research results that has been taught at educational institutions as well as applied to design practices. First, this keynote paper describes some methods to classify them. It then illustrates individual theories and methodologies

24 CFR 904.205 - Training methodology.

Science.gov (United States)

2010-04-01

... Training methodology. Equal in importance to the content of the pre- and post-occupancy training is the training methodology. Because groups vary, there should be adaptability in the communication and learning experience. Methods to be utilized may include group presentations, small discussion groups, special classes...

Air pollution monitoring - a methodological approach

International Nuclear Information System (INIS)

Trajkovska Trpevska, Magdalena

2002-01-01

Methodology for monitoring the emission of polluters in the air is a complex concept that in general embraces following fazes: sampling, laboratory treatment, and interpretation of results. In Company for technological and laboratory investigation and environmental protection - Mining Institute Skopje, the control of emission of polluters in the air is performing according methodology based in general on the recommendation of standard VDI 2.066 prescribe from Ministry of Ecology in Germany, because adequate legislation in our country does not exist. In this article the basic treatment of methodology for the air polluters emission control is presented. (Original)

Development of assessment methodology for plant configuration control

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chang Hyeon; Yu, Yeong Woo; Cho, Jae Seon; Kim, Ju Yeol; Kim, Yun Ik; Yang, Hui Chang; Park, Gang Min; Hur, Byeong Gil [Seoul National Univ., Seoul (Korea, Republic of)

1999-03-15

The purpose of this study is the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of Nuclear Power Plant. The development of this methodology can contribute to enhance safety. In the first year of this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested.

A Methodology for Quality Problems Diagnosis in SMEs

OpenAIRE

Humberto N. Teixeira; Isabel S. Lopes; Sérgio D. Sousa

2012-01-01

This article proposes a new methodology to be used by SMEs (Small and Medium enterprises) to characterize their performance in quality, highlighting weaknesses and area for improvement. The methodology aims to identify the principal causes of quality problems and help to prioritize improvement initiatives. This is a self-assessment methodology that intends to be easy to implement by companies with low maturity level in quality. The methodology is organized in six different steps which include...

Using stakeholder engagement to develop a patient-centered pediatric asthma intervention.

Science.gov (United States)

Shelef, Deborah Q; Rand, Cynthia; Streisand, Randi; Horn, Ivor B; Yadav, Kabir; Stewart, Lisa; Fousheé, Naja; Waters, Damian; Teach, Stephen J

2016-12-01

Stakeholder engagement has the potential to develop research interventions that are responsive to patient and provider preferences. This approach contrasts with traditional models of clinical research in which researchers determine the study's design. This article describes the effect of stakeholder engagement on the design of a randomized trial of an intervention designed to improve child asthma outcomes by reducing parental stress. The study team developed and implemented a stakeholder engagement process that provided iterative feedback regarding the study design, patient-centered outcomes, and intervention. Stakeholder engagement incorporated the perspectives of parents of children with asthma; local providers of community-based medical, legal, and social services; and national experts in asthma research methodology and implementation. Through a year-long process of multidimensional stakeholder engagement, the research team successfully refined and implemented a patient-centered study protocol. Key stakeholder contributions included selection of patient-centered outcome measures, refinement of intervention content and format, and language framing the study in a culturally appropriate manner. Stakeholder engagement was a useful framework for developing an intervention that was acceptable and relevant to our target population. This approach might have unique benefits in underserved populations, leading to sustainable improvement in health outcomes and reduced disparities. Copyright © 2016 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

CALS and the Product State Model - Methodology and Supporting Schools and Paradigms

DEFF Research Database (Denmark)

Larsen, Michael Holm

1998-01-01

incorporates relevant information about each stage of the production process.The paper will describe the research object, the model object and discuss a part of the methodology in developing a Product State Model. The project is primarily technological, however, organisational and human aspects......This paper address the preliminary considerations in a research project, initiated February 1997, regarding Continuous Acquisition and Life-cycle Support (CALS) which is a part of the activities in CALS Center Denmark. The CALS concept is presented focusing on the Product State Model (PSM). The PSM...... will be developed upon, will be discussed. Also, the parameters for evaluating the PSM will be considered. In establishing the theoretical body of knowledge with respect to CALS, an identification of schools and paradigms within the research area of applying information technology in a manufacturing environment...

Critical infrastructure systems of systems assessment methodology.

Energy Technology Data Exchange (ETDEWEB)

Sholander, Peter E.; Darby, John L.; Phelan, James M.; Smith, Bryan; Wyss, Gregory Dane; Walter, Andrew; Varnado, G. Bruce; Depoy, Jennifer Mae

2006-10-01

Assessing the risk of malevolent attacks against large-scale critical infrastructures requires modifications to existing methodologies that separately consider physical security and cyber security. This research has developed a risk assessment methodology that explicitly accounts for both physical and cyber security, while preserving the traditional security paradigm of detect, delay, and respond. This methodology also accounts for the condition that a facility may be able to recover from or mitigate the impact of a successful attack before serious consequences occur. The methodology uses evidence-based techniques (which are a generalization of probability theory) to evaluate the security posture of the cyber protection systems. Cyber threats are compared against cyber security posture using a category-based approach nested within a path-based analysis to determine the most vulnerable cyber attack path. The methodology summarizes the impact of a blended cyber/physical adversary attack in a conditional risk estimate where the consequence term is scaled by a ''willingness to pay'' avoidance approach.

METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

Directory of Open Access Journals (Sweden)

Tetyana KOVALCHUK

2016-07-01

Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

Methodology for Validating Building Energy Analysis Simulations

Energy Technology Data Exchange (ETDEWEB)

Judkoff, R.; Wortman, D.; O' Doherty, B.; Burch, J.

2008-04-01

The objective of this report was to develop a validation methodology for building energy analysis simulations, collect high-quality, unambiguous empirical data for validation, and apply the validation methodology to the DOE-2.1, BLAST-2MRT, BLAST-3.0, DEROB-3, DEROB-4, and SUNCAT 2.4 computer programs. This report covers background information, literature survey, validation methodology, comparative studies, analytical verification, empirical validation, comparative evaluation of codes, and conclusions.

The methodological defense of realism scrutinized.

Science.gov (United States)

Wray, K Brad

2015-12-01

I revisit an older defense of scientific realism, the methodological defense, a defense developed by both Popper and Feyerabend. The methodological defense of realism concerns the attitude of scientists, not philosophers of science. The methodological defense is as follows: a commitment to realism leads scientists to pursue the truth, which in turn is apt to put them in a better position to get at the truth. In contrast, anti-realists lack the tenacity required to develop a theory to its fullest. As a consequence, they are less likely to get at the truth. My aim is to show that the methodological defense is flawed. I argue that a commitment to realism does not always benefit science, and that there is reason to believe that a research community with both realists and anti-realists in it may be better suited to advancing science. A case study of the Copernican Revolution in astronomy supports this claim. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Drug information management through the intranet of a hospital center].

Science.gov (United States)

Juárez Giménez, J C; Mendarte Barrenechea, L; Gil Luján, G; Sala Piñol, F; Lalueza Broto, P; Girona Brumós, L; Monterde Junyent, J

2006-01-01

This paper describes the methodology used for the implementation and validation of a network resource incorporated to the intranet of the Hospital, in order to retain and disseminate information from the Drug Information Center (DIC) of a pharmacy service in a hospital center. A working group designed the structure, contents, memory needs, priority of access for users and a quality assessment questionnaire. The resource developed by the working group had a capacity of 70 Gb and its structure was based on HTML documents, including files with different format and 12 theme areas. Two levels of priority of access were established depending on the user and two persons were in charge of the resource. The questionnaire was delivered after three months of use. Sixty nine per cent of the users regarded the resource as very useful and 31%, as useful. The final structure, according to the results of the survey, had 11 theme areas. The use of the hospital Intranet in order to include and organize DIC information can be very simple and economic. Furthermore, the involvement of all the users in its design and structure can facilitate the practical use of this tool and improve its quality.

Reliability Centered Maintenance for Savannah River Site`s interim waste management facilities. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Hauer, K.A. [Westinghouse Savannah River Co., Aiken, SC (United States); Wilson, J.F. [PRC, Inc. (US)

1992-06-01

The application of Reliability Centered Maintenance (RCM) has been shown to be an effective means to optimize maintenance programs or to establish new programs. The key to success of any RCM program is to customize the methodology to meet the specific needs of the implementing organization. This paper discusses how RCM is being used to establish the preventive maintenance program and how the resulting system data is being used to support the Technical Baseline reconstitution effort for the interim Waste Management Division of Westinghouse Savannah River Company (WSRC).

Neutron beam-line shield design for the protein crystallography instrument at the Lujan Center

International Nuclear Information System (INIS)

Russell, G.J.; Pitcher, E.J.; Muhrer, G.; Ferguson, P.D.

2001-01-01

We have developed a very useful methodology for calculating absolute total (neutron plus gamma-ray) dose equivalent rates for use in the design of neutron beam line shields at a spallation neutron source. We have applied this technique to the design of beam line shields for several new materials science instruments being built at the Manuel Lujan Jr. Neutron Scattering Center. These instruments have a variety of collimation systems and different beam line shielding issues. We show here some specific beam line shield designs for the Protein Crystallography Instrument. (author)

Relative Hazard and Risk Measure Calculation Methodology Rev 1

International Nuclear Information System (INIS)

Stenner, Robert D.; White, Michael K.; Strenge, Dennis L.; Aaberg, Rosanne L.; Andrews, William B.

2000-01-01

Documentation of the methodology used to calculate relative hazard and risk measure results for the DOE complex wide risk profiles. This methodology is used on major site risk profiles. In February 1997, the Center for Risk Excellence (CRE) was created and charged as a technical, field-based partner to the Office of Science and Risk Policy (EM-52). One of the initial charges to the CRE is to assist the sites in the development of ''site risk profiles.'' These profiles are to be relatively short summaries (periodically updated) that present a broad perspective on the major risk related challenges that face the respective site. The risk profiles are intended to serve as a high-level communication tool for interested internal and external parties to enhance the understanding of these risk-related challenges. The risk profiles for each site have been designed to qualitatively present the following information: (1) a brief overview of the site, (2) a brief discussion on the historical mission of the site, (3) a quote from the site manager indicating the site's commitment to risk management, (4) a listing of the site's top risk-related challenges, (5) a brief discussion and detailed table presenting the site's current risk picture, (6) a brief discussion and detailed table presenting the site's future risk reduction picture, and (7) graphic illustrations of the projected management of the relative hazards at the site. The graphic illustrations were included to provide the reader of the risk profiles with a high-level mental picture to associate with all the qualitative information presented in the risk profile. Inclusion of these graphic illustrations presented the CRE with the challenge of how to fold this high-level qualitative risk information into a system to produce a numeric result that would depict the relative change in hazard, associated with each major risk management action, so it could be presented graphically. This report presents the methodology developed

Methodology, theoretical framework and scholarly significance: An ...

African Journals Online (AJOL)

Methodology, theoretical framework and scholarly significance: An overview ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Keywords: Legal Research, Methodology, Theory, Pedagogy, Legal Training, Scholarship ...

Tornado missile simulation and design methodology. Volume 1: simulation methodology, design applications, and TORMIS computer code. Final report

International Nuclear Information System (INIS)

Twisdale, L.A.; Dunn, W.L.

1981-08-01

A probabilistic methodology has been developed to predict the probabilities of tornado-propelled missiles impacting and damaging nuclear power plant structures. Mathematical models of each event in the tornado missile hazard have been developed and sequenced to form an integrated, time-history simulation methodology. The models are data based where feasible. The data include documented records of tornado occurrence, field observations of missile transport, results of wind tunnel experiments, and missile impact tests. Probabilistic Monte Carlo techniques are used to estimate the risk probabilities. The methodology has been encoded in the TORMIS computer code to facilitate numerical analysis and plant-specific tornado missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and risk has been assessed for a hypothetical nuclear power plant design case study

A design methodology for unattended monitoring systems

International Nuclear Information System (INIS)

SMITH, JAMES D.; DELAND, SHARON M.

2000-01-01

The authors presented a high-level methodology for the design of unattended monitoring systems, focusing on a system to detect diversion of nuclear materials from a storage facility. The methodology is composed of seven, interrelated analyses: Facility Analysis, Vulnerability Analysis, Threat Assessment, Scenario Assessment, Design Analysis, Conceptual Design, and Performance Assessment. The design of the monitoring system is iteratively improved until it meets a set of pre-established performance criteria. The methodology presented here is based on other, well-established system analysis methodologies and hence they believe it can be adapted to other verification or compliance applications. In order to make this approach more generic, however, there needs to be more work on techniques for establishing evaluation criteria and associated performance metrics. They found that defining general-purpose evaluation criteria for verifying compliance with international agreements was a significant undertaking in itself. They finally focused on diversion of nuclear material in order to simplify the problem so that they could work out an overall approach for the design methodology. However, general guidelines for the development of evaluation criteria are critical for a general-purpose methodology. A poor choice in evaluation criteria could result in a monitoring system design that solves the wrong problem

Systematic Review Methodology in Higher Education

Science.gov (United States)

Bearman, Margaret; Smith, Calvin D.; Carbone, Angela; Slade, Susan; Baik, Chi; Hughes-Warrington, Marnie; Neumann, David L.

2012-01-01

Systematic review methodology can be distinguished from narrative reviews of the literature through its emphasis on transparent, structured and comprehensive approaches to searching the literature and its requirement for formal synthesis of research findings. There appears to be relatively little use of the systematic review methodology within the…

METHODOLOGICAL PROBLEMS OF E-LEARNING DIDACTICS

Directory of Open Access Journals (Sweden)

Sergey F. Sergeev

2015-01-01

Full Text Available The article is devoted to the discussion of the methodological problems of e-learning, didactic issues the use of advanced networking and Internet technologies to create training systems and simulators based on the methodological principles of non-classical and post-non-classical psychology and pedagogy. 

76 FR 53533 - Notification of New Pricing Methodology

Science.gov (United States)

2011-08-26

... products. The new pricing methodology is based primarily on the London Fix weekly average (average of the... DEPARTMENT OF THE TREASURY United States Mint Notification of New Pricing Methodology ACTION: Notice. SUMMARY: The United States Mint is implementing a new pricing methodology for its commemorative...

The Speaker Respoken: Material Rhetoric as Feminist Methodology.

Science.gov (United States)

Collins, Vicki Tolar

1999-01-01

Presents a methodology based on the concept of "material rhetoric" that can help scholars avoid problems as they reclaim women's historical texts. Defines material rhetoric and positions it theoretically in relation to other methodologies, including bibliographical studies, reception theory, and established feminist methodologies. Illustrates…

Digital health and the need to develop centers of expertise in sub-Saharan Africa : two examples in Mali and Cameroon.

Science.gov (United States)

Bagayoko, C-O; Bediang, G; Anne, A; Niang, M; Traoré, A-K; Geissbuhler, A

2017-11-01

It is generally agreed today that digital technology provides a lever for improving access to health care, care processes, and public health planning and activities such as education and prevention. Its use in countries that have reached a given level of development has taken place in a somewhat fragmented manner that raises important interoperability problems and sometimes makes synergy impossible between the different projects of digital health. This may be linked to several factors, principally the lack of a global vision of digital health, and inadequate methodological knowledge that prevents the development and implementation of this vision. The countries of Africa should be able to profit from these errors from the beginnings of digital health, by moving toward systemic approaches, known standards, and tools appropriate to the realities on the ground. The aim of this work is to present the methodological approaches as well as the principal results of two relatively new centers of expertise in Mali and Cameroon intended to cultivate this vision of digital governance in the domain of health and to train professionals to implement the projects. Both centers were created due to initiatives of organizations of civil society. The center in Mali developed toward an economic interest group and then to collaboration with healthcare and university organizations. The same process is underway at the Cameroon center. The principal results from these centers can be enumerated under different aspects linked to research, development, training, and implementation of digital health tools. They have produced dozens of scientific publications, doctoral dissertations, theses, and papers focused especially on subjects such as the medicoeconomic evaluation tools of e-health and health information technology systems. In light of these results, we can conclude that these two centers of expertise have well and truly been established. Their role may be decisive in the local training of

METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (theoretical and methodological foundations of vocational teacher education

Directory of Open Access Journals (Sweden)

Evgeny M. Dorozhkin

2014-01-01

Full Text Available The study is aimed at investigating a justification of the new approach to the problem of vocational education development through the prism of interdependence research methodology and practice. This conceptual setup allows determining the main directions for teacher training modernization of vocational schools. The authors note that the current socio-economic situation in our country has actualized the problem of personnel training. Politicians, economists and scientists’ speeches are all about the shortage of skilled personnel. They see the main reason of this catastrophic situation in the present system of primary and secondary vocational education. At least they concern over the current practice of pedagogical personnel training of vocational education who are to restore the system of vocational education. Our country, Russia has a great positive experience in solving this problem. Scientific-methodological centre for vocational teacher education is the Russian State Vocational Pedagogical University under the scientific direction of Academician of the Russian Academy of Education, G. M. Romantsev. The reflection of scientifictheoretical bases of this education led the authors to the analysis and designing (formation of existent and new professional and pedagogical methodology. Methods. The fundamental position of A. M. Novikov on the generality of the research (scientific and practical activity methodology has become the theoretical platform of the present study. Conceptual field, conceptual statements and professional model are presented as the whole system (or integrating factor. The theoretical framework has determined the logic of the study and its results. Scientific and educational methodology differentiation in terms of the subject of cognitive activity has allowed identifying the main scientific and practical disciplines of vocational teacher education. The creative concept as the subject ground is instrumental analysis of

Current trends in Bayesian methodology with applications

CERN Document Server

Upadhyay, Satyanshu K; Dey, Dipak K; Loganathan, Appaia

2015-01-01

Collecting Bayesian material scattered throughout the literature, Current Trends in Bayesian Methodology with Applications examines the latest methodological and applied aspects of Bayesian statistics. The book covers biostatistics, econometrics, reliability and risk analysis, spatial statistics, image analysis, shape analysis, Bayesian computation, clustering, uncertainty assessment, high-energy astrophysics, neural networking, fuzzy information, objective Bayesian methodologies, empirical Bayes methods, small area estimation, and many more topics.Each chapter is self-contained and focuses on

Hazard classification methodology

International Nuclear Information System (INIS)

Brereton, S.J.

1996-01-01

This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

Quantified Risk Ranking Model for Condition-Based Risk and Reliability Centered Maintenance

Science.gov (United States)

Chattopadhyaya, Pradip Kumar; Basu, Sushil Kumar; Majumdar, Manik Chandra

2017-06-01

In the recent past, risk and reliability centered maintenance (RRCM) framework is introduced with a shift in the methodological focus from reliability and probabilities (expected values) to reliability, uncertainty and risk. In this paper authors explain a novel methodology for risk quantification and ranking the critical items for prioritizing the maintenance actions on the basis of condition-based risk and reliability centered maintenance (CBRRCM). The critical items are identified through criticality analysis of RPN values of items of a system and the maintenance significant precipitating factors (MSPF) of items are evaluated. The criticality of risk is assessed using three risk coefficients. The likelihood risk coefficient treats the probability as a fuzzy number. The abstract risk coefficient deduces risk influenced by uncertainty, sensitivity besides other factors. The third risk coefficient is called hazardous risk coefficient, which is due to anticipated hazards which may occur in the future and the risk is deduced from criteria of consequences on safety, environment, maintenance and economic risks with corresponding cost for consequences. The characteristic values of all the three risk coefficients are obtained with a particular test. With few more tests on the system, the values may change significantly within controlling range of each coefficient, hence `random number simulation' is resorted to obtain one distinctive value for each coefficient. The risk coefficients are statistically added to obtain final risk coefficient of each critical item and then the final rankings of critical items are estimated. The prioritization in ranking of critical items using the developed mathematical model for risk assessment shall be useful in optimization of financial losses and timing of maintenance actions.

Qualitative Methods in Patient-Centered Outcomes Research.

Science.gov (United States)

Vandermause, Roxanne; Barg, Frances K; Esmail, Laura; Edmundson, Lauren; Girard, Samantha; Perfetti, A Ross

2017-02-01

The Patient-Centered Outcomes Research Institute (PCORI), created to fund research guided by patients, caregivers, and the broader health care community, offers a new research venue. Many (41 of 50) first funded projects involved qualitative research methods. This study was completed to examine the current state of the science of qualitative methodologies used in PCORI-funded research. Principal investigators participated in phenomenological interviews to learn (a) how do researchers using qualitative methods experience seeking funding for, implementing and disseminating their work; and (b) how may qualitative methods advance the quality and relevance of evidence for patients? Results showed the experience of doing qualitative research in the current research climate as "Being a bona fide qualitative researcher: Staying true to research aims while negotiating challenges," with overlapping patterns: (a) researching the elemental, (b) expecting surprise, and (c) pushing boundaries. The nature of qualitative work today was explicitly described and is rendered in this article.

Research Methodology in Global Strategy Research

DEFF Research Database (Denmark)

Cuervo-Cazurra, Alvaro; Mudambi, Ram; Pedersen, Torben

2017-01-01

We review advances in research methodology used in global strategy research and provide suggestions on how researchers can improve their analyses and arguments. Methodological advances in the extraction of information, such as computer-aided text analysis, and in the analysis of datasets......, such as differences-in-differences and propensity score matching, have helped deal with challenges (e.g., endogeneity and causality) that bedeviled earlier studies and resulted in conflicting findings. These methodological advances need to be considered as tools that complement theoretical arguments and well......-explained logics and mechanisms so that researchers can provide better and more relevant recommendations to managers designing the global strategies of their organizations....

Attitudes of teachers education centers to special education inclusion

Directory of Open Access Journals (Sweden)

M.ª del Carmen PEGALAJAR PALOMINO

2014-10-01

Full Text Available This research aims to analyze the attitudes and perceptions towards inclusive education teacher that practices in special education centers in Andalusia. The paper has used a descriptive methodology, a total of 428 participating teachers and using data collection a semi structured questionnaire developed ad hoc. The results show how teachers of special education centers in Andalusia consider inclusive education as a pillar in education, while defining the mode of schooling in special education institutions as an educational response to students aimed at improving their quality of life and achieve greater personal independence and function in daily life activities. They also consider that the students enrolled in these schools has higher educational needs in the field of health, cognitive and social. It stands out even the existence of statistically significant differences in attitudes and perceptions of teachers as they have developed or no practical training related to the field of inclusive education during their initial training, being more favorable in the case of those without such training. Thus, we want to know the perceptions of these teachers on inclusive education to establish proposals for improvement in teacher education that lead to the development of a process of quality teaching and learning for pupils with severe and permanent disabilities.

New mission requirements methodologies for services provided by the Office of Space Communications

Science.gov (United States)

Holmes, Dwight P.; Hall, J. R.; Macoughtry, William; Spearing, Robert

1993-01-01

The Office of Space Communications, NASA Headquarters, has recently revised its methodology for receiving, accepting and responding to customer requests for use of that office's tracking and communications capabilities. This revision is the result of a process which has become over-burdened by the size of the currently active and proposed missions set, requirements reviews that focus on single missions rather than on mission sets, and negotiations most often not completed early enough to effect needed additions to capacity or capability prior to launch. The requirements-coverage methodology described is more responsive to project/program needs and provides integrated input into the NASA budget process early enough to effect change, and describes the mechanisms and tools in place to insure a value-added process which will benefit both NASA and its customers. Key features of the requirements methodology include the establishment of a mechanism for early identification of and systems trades with new customers, and delegates the review and approval of requirements documents to NASA centers in lieu of Headquarters, thus empowering the system design teams to establish and negotiate the detailed requirements with the user. A Mission Requirements Request (MRR) is introduced to facilitate early customer interaction. The expected result is that the time to achieve an approved set of implementation requirements which meet the customer's needs can be greatly reduced. Finally, by increasing the discipline in requirements management, through the use of base lining procedures, a tighter coupling between customer requirements and the budget is provided. A twice-yearly projection of customer requirements accommodation, designated as the Capacity Projection Plan (CPP), provides customer feedback allowing the entire mission set to be serviced.

Embodied Writing: Choreographic Composition as Methodology

Science.gov (United States)

Ulmer, Jasmine B.

2015-01-01

This paper seeks to examine how embodied methodological approaches might inform dance education practice and research. Through a series of examples, this paper explores how choreographic writing might function as an embodied writing methodology. Here, choreographic writing is envisioned as a form of visual word choreography in which words move,…

Solid Waste Management Planning--A Methodology

Science.gov (United States)

Theisen, Hilary M.; And Others

1975-01-01

This article presents a twofold solid waste management plan consisting of a basic design methodology and a decision-making methodology. The former provides a framework for the developing plan while the latter builds flexibility into the design so that there is a model for use during the planning process. (MA)

Disposal criticality analysis methodology's principal isotope burnup credit

International Nuclear Information System (INIS)

Doering, T.W.; Thomas, D.A.

2001-01-01

This paper presents the burnup credit aspects of the United States Department of Energy Yucca Mountain Project's methodology for performing criticality analyses for commercial light-water-reactor fuel. The disposal burnup credit methodology uses a 'principal isotope' model, which takes credit for the reduced reactivity associated with the build-up of the primary principal actinides and fission products in irradiated fuel. Burnup credit is important to the disposal criticality analysis methodology and to the design of commercial fuel waste packages. The burnup credit methodology developed for disposal of irradiated commercial nuclear fuel can also be applied to storage and transportation of irradiated commercial nuclear fuel. For all applications a series of loading curves are developed using a best estimate methodology and depending on the application, an additional administrative safety margin may be applied. The burnup credit methodology better represents the 'true' reactivity of the irradiated fuel configuration, and hence the real safety margin, than do evaluations using the 'fresh fuel' assumption. (author)

SciDAC-Center for Plasma Edge Simulation Report

Energy Technology Data Exchange (ETDEWEB)

Parker, Steven [Univ. of Utah, Salt Lake City, UT (United States)

2013-12-24

The Common Component Architecture (CCA) effort is the embodiment of a long-range program of research and development into the formulation, roles, and use of component technologies in high-performance scientific computing. CCA components can interoperate with other components in a variety of frameworks, including SCIRun2 from the University of Utah. The SCIRun2 framework is also developing the ability to connect components from a variety of different models through a mechanism called meta-components. The meta component model operates by providing a plugin architecture for component models. Abstract components are manipulated and managed by the SCIRun2 framework, while concrete component models perform the actual work and communicate with each other directly. We will leverage the SCIRun2 framework and the Kepler system to orchestrate components in the Fusion Simulation Project (FSP) and to provide a CCA-based interface with Kepler. The groundwork for this functionality is being performed with the Scientific Data Management center. The SDM center is developing CCA-compliant interfaces for expressing and executing workflows and create workflow components based on SCIRun and Ptolemy (Kepler) execution engines, including development of uniform interfaces for selecting, starting, and monitoring scientific workflows. Accomplishments include Introduction to CCA and Simulation Software Systems, Introduction into SCIRun2 and Bridging within SCIRun2, CCALoop: A scalable design for a distributed component framework, and Combining Workflow methodologies with Component Architectures.

Methodology for developing new test methods

Directory of Open Access Journals (Sweden)

A. I. Korobko

2017-06-01

Full Text Available The paper describes the methodology for developing new test methods and forming solutions for the development of new test methods. The basis of the methodology for developing new test methods is the individual elements of the system and process approaches. They contribute to the development of an effective research strategy for the object, the study of interrelations, the synthesis of an adequate model of the test method. The effectiveness of the developed test method is determined by the correct choice of the set of concepts, their interrelations and mutual influence. This allows you to solve the tasks assigned to achieve the goal. The methodology is based on the use of fuzzy cognitive maps. The question of the choice of the method on the basis of which the model for the formation of solutions is based is considered. The methodology provides for recording a model for a new test method in the form of a finite set of objects. These objects are significant for the test method characteristics. Then a causal relationship is established between the objects. Further, the values of fitness indicators and the observability of the method and metrological tolerance for the indicator are established. The work is aimed at the overall goal of ensuring the quality of tests by improving the methodology for developing the test method.

Methodology for ranking restoration options

DEFF Research Database (Denmark)

Jensen, Per Hedemann

1999-01-01

techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

A performance assessment methodology for low-level waste facilities

International Nuclear Information System (INIS)

Kozak, M.W.; Chu, M.S.Y.; Mattingly, P.A.

1990-07-01

A performance assessment methodology has been developed for use by the US Nuclear Regulatory Commission in evaluating license applications for low-level waste disposal facilities. This report provides a summary of background reports on the development of the methodology and an overview of the models and codes selected for the methodology. The overview includes discussions of the philosophy and structure of the methodology and a sequential procedure for applying the methodology. Discussions are provided of models and associated assumptions that are appropriate for each phase of the methodology, the goals of each phase, data required to implement the models, significant sources of uncertainty associated with each phase, and the computer codes used to implement the appropriate models. In addition, a sample demonstration of the methodology is presented for a simple conceptual model. 64 refs., 12 figs., 15 tabs

Methodology for Modeling and Analysis of Business Processes (MMABP

Directory of Open Access Journals (Sweden)

Vaclav Repa

2015-10-01

Full Text Available This paper introduces the methodology for modeling business processes. Creation of the methodology is described in terms of the Design Science Method. Firstly, the gap in contemporary Business Process Modeling approaches is identified and general modeling principles which can fill the gap are discussed. The way which these principles have been implemented in the main features of created methodology is described. Most critical identified points of the business process modeling are process states, process hierarchy and the granularity of process description. The methodology has been evaluated by use in the real project. Using the examples from this project the main methodology features are explained together with the significant problems which have been met during the project. Concluding from these problems together with the results of the methodology evaluation the needed future development of the methodology is outlined.

Methodology to detect gaps in a soccer defence

DEFF Research Database (Denmark)

Knudsen, Nikolas Sten; Andersen, Thomas Bull

2015-01-01

The purpose of the present study was to create a methodology which can provide information about gaps in an opposing team’s defence. To illustrate the methodology, a defence was tracked during a game in the danish Superliga using ZXY radio tracking and analysed using the methodology. Results show...

Challenges and Opportunities for Harmonizing Research Methodology

DEFF Research Database (Denmark)

van Hees, V. T.; Thaler-Kall, K.; Wolf, K. H.

2016-01-01

Objectives: Raw accelerometry is increasingly being used in physical activity research, but diversity in sensor design, attachment and signal processing challenges the comparability of research results. Therefore, efforts are needed to harmonize the methodology. In this article we reflect on how...... increased methodological harmonization may be achieved. Methods: The authors of this work convened for a two-day workshop (March 2014) themed on methodological harmonization of raw accelerometry. The discussions at the workshop were used as a basis for this review. Results: Key stakeholders were identified...... as manufacturers, method developers, method users (application), publishers, and funders. To facilitate methodological harmonization in raw accelerometry the following action points were proposed: i) Manufacturers are encouraged to provide a detailed specification of their sensors, ii) Each fundamental step...

Exploring Participatory Methodologies in Organizational Discourse Analysis

DEFF Research Database (Denmark)

Plotnikof, Mie

2014-01-01

Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new contribu......Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new...... contributions. As regards conceptual efforts are made but further exploration of methodological combinations and their practical implications are called for. This paper argues 1) to combine methodologies by approaching this as scholarly subjectification processes, and 2) to perform combinations in both...

Organizing the Methodology Work at Higher School

Directory of Open Access Journals (Sweden)

O. A. Plaksina

2012-01-01

Full Text Available The paper considers the methodology components of organizing the higher school training. The research and analysis of the existing methodology systems carried out by the authors reveals that their advantages and disadvantages are related to the type of the system creating element of the methodology system organizational structure. The optimal scheme of such system has been developed in the context of Vocational School Reorganization implying the specification and expansion of the set of basic design principles of any control system. Following the suggested organizational approach provides the grounds for teachers’ self development and professional growth. The methodology of the approach allows using the given structure in any higher educational institution, providing the system transition from its simple functioning to the sustainable development mode. 

Evaluation of Flagging Criteria of United States Kidney Transplant Center Performance: How to Best Define Outliers?

Science.gov (United States)

Schold, Jesse D; Miller, Charles M; Henry, Mitchell L; Buccini, Laura D; Flechner, Stuart M; Goldfarb, David A; Poggio, Emilio D; Andreoni, Kenneth A

2017-06-01

Scientific Registry of Transplant Recipients report cards of US organ transplant center performance are publicly available and used for quality oversight. Low center performance (LP) evaluations are associated with changes in practice including reduced transplant rates and increased waitlist removals. In 2014, Scientific Registry of Transplant Recipients implemented new Bayesian methodology to evaluate performance which was not adopted by Center for Medicare and Medicaid Services (CMS). In May 2016, CMS altered their performance criteria, reducing the likelihood of LP evaluations. Our aims were to evaluate incidence, survival rates, and volume of LP centers with Bayesian, historical (old-CMS) and new-CMS criteria using 6 consecutive program-specific reports (PSR), January 2013 to July 2015 among adult kidney transplant centers. Bayesian, old-CMS and new-CMS criteria identified 13.4%, 8.3%, and 6.1% LP PSRs, respectively. Over the 3-year period, 31.9% (Bayesian), 23.4% (old-CMS), and 19.8% (new-CMS) of centers had 1 or more LP evaluation. For small centers (evaluations (52 vs 13 PSRs) for 1-year mortality with Bayesian versus new-CMS criteria. For large centers (>183 transplants/PSR), there were 3-fold additional LP evaluations for 1-year mortality with Bayesian versus new-CMS criteria with median differences in observed and expected patient survival of -1.6% and -2.2%, respectively. A significant proportion of kidney transplant centers are identified as low performing with relatively small survival differences compared with expected. Bayesian criteria have significantly higher flagging rates and new-CMS criteria modestly reduce flagging. Critical appraisal of performance criteria is needed to assess whether quality oversight is meeting intended goals and whether further modifications could reduce risk aversion, more efficiently allocate resources, and increase transplant opportunities.

Web survey methodology

CERN Document Server

Callegaro, Mario; Vehovar, Asja

2015-01-01

Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

Unattended Monitoring System Design Methodology

International Nuclear Information System (INIS)

Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

1999-01-01

A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

A methodology for string resolution

International Nuclear Information System (INIS)

Karonis, N.T.

1992-11-01

In this paper we present a methodology, not a tool. We present this methodology with the intent that it be adopted, on a case by case basis, by each of the existing tools in EPICS. In presenting this methodology, we describe each of its two components in detail and conclude with an example depicting how the methodology can be used across a pair of tools. The task of any control system is to provide access to the various components of the machine being controlled, for example, the Advanced Photon Source (APS). By access, we mean the ability to monitor the machine's status (reading) as well as the ability to explicitly change its status (writing). The Experimental Physics and Industrial Control System (EPICS) is a set of tools, designed to act in concert, that allows one to construct a control system. EPICS provides the ability to construct a control system that allows reading and writing access to the machine. It does this through the notion of databases. Each of the components of the APS that is accessed by the control system is represented in EPICS by a set of named database records. Once this abstraction is made, from physical device to named database records, the process of monitoring and changing the state of that device becomes the simple process of reading and writing information from and to its associated named records

Improved USGS methodology for assessing continuous petroleum resources

Science.gov (United States)

Charpentier, Ronald R.; Cook, Troy A.

2010-01-01

This report presents an improved methodology for estimating volumes of continuous (unconventional) oil and gas resources within the United States and around the world. The methodology is based on previously developed U.S. Geological Survey methodologies that rely on well-scale production data. Improvements were made primarily to how the uncertainty about estimated ultimate recoveries is incorporated in the estimates. This is particularly important when assessing areas with sparse or no production data, because the new methodology allows better use of analog data from areas with significant discovery histories.

Using Modern Methodologies with Maintenance Software

Science.gov (United States)

Streiffert, Barbara A.; Francis, Laurie K.; Smith, Benjamin D.

2014-01-01

Jet Propulsion Laboratory uses multi-mission software produced by the Mission Planning and Sequencing (MPS) team to process, simulate, translate, and package the commands that are sent to a spacecraft. MPS works under the auspices of the Multi-Mission Ground Systems and Services (MGSS). This software consists of nineteen applications that are in maintenance. The MPS software is classified as either class B (mission critical) or class C (mission important). The scheduling of tasks is difficult because mission needs must be addressed prior to performing any other tasks and those needs often spring up unexpectedly. Keeping track of the tasks that everyone is working on is also difficult because each person is working on a different software component. Recently the group adopted the Scrum methodology for planning and scheduling tasks. Scrum is one of the newer methodologies typically used in agile development. In the Scrum development environment, teams pick their tasks that are to be completed within a sprint based on priority. The team specifies the sprint length usually a month or less. Scrum is typically used for new development of one application. In the Scrum methodology there is a scrum master who is a facilitator who tries to make sure that everything moves smoothly, a product owner who represents the user(s) of the software and the team. MPS is not the traditional environment for the Scrum methodology. MPS has many software applications in maintenance, team members who are working on disparate applications, many users, and is interruptible based on mission needs, issues and requirements. In order to use scrum, the methodology needed adaptation to MPS. Scrum was chosen because it is adaptable. This paper is about the development of the process for using scrum, a new development methodology, with a team that works on disparate interruptible tasks on multiple software applications.

EVALUATION OF THE GRAI INTEGRATED METHODOLOGY AND THE IMAGIM SUPPORTWARE

Directory of Open Access Journals (Sweden)

J.M.C. Reid

2012-01-01

Full Text Available This paper describes the GRAI Integrated Methodology and identifies the need for computer tools to support enterprise modelling,design and integration. The IMAGIM tool is then evaluated in terms of its ability to support the GRAI Integrated Methodology. The GRAI Integrated Methodology is an Enterprise Integration methodology developed to support the design of CIM systems . The GRAI Integrated Methodology consists of the GRAI model and a structured approach. The latest addition to the methodology is the IMAGIM software tool developed by the GRAI research group for the specific purpose of supporting the methodology.

Three-dimensional RAMA fluence methodology benchmarking

International Nuclear Information System (INIS)

Baker, S. P.; Carter, R. G.; Watkins, K. E.; Jones, D. B.

2004-01-01

This paper describes the benchmarking of the RAMA Fluence Methodology software, that has been performed in accordance with U. S. Nuclear Regulatory Commission Regulatory Guide 1.190. The RAMA Fluence Methodology has been developed by TransWare Enterprises Inc. through funding provided by the Electric Power Research Inst., Inc. (EPRI) and the Boiling Water Reactor Vessel and Internals Project (BWRVIP). The purpose of the software is to provide an accurate method for calculating neutron fluence in BWR pressure vessels and internal components. The Methodology incorporates a three-dimensional deterministic transport solution with flexible arbitrary geometry representation of reactor system components, previously available only with Monte Carlo solution techniques. Benchmarking was performed on measurements obtained from three standard benchmark problems which include the Pool Criticality Assembly (PCA), VENUS-3, and H. B. Robinson Unit 2 benchmarks, and on flux wire measurements obtained from two BWR nuclear plants. The calculated to measured (C/M) ratios range from 0.93 to 1.04 demonstrating the accuracy of the RAMA Fluence Methodology in predicting neutron flux, fluence, and dosimetry activation. (authors)

[Qualitative research methodology in health care].

Science.gov (United States)

Bedregal, Paula; Besoain, Carolina; Reinoso, Alejandro; Zubarew, Tamara

2017-03-01

Health care research requires different methodological approaches such as qualitative and quantitative analyzes to understand the phenomena under study. Qualitative research is usually the least considered. Central elements of the qualitative method are that the object of study is constituted by perceptions, emotions and beliefs, non-random sampling by purpose, circular process of knowledge construction, and methodological rigor throughout the research process, from quality design to the consistency of results. The objective of this work is to contribute to the methodological knowledge about qualitative research in health services, based on the implementation of the study, “The transition process from pediatric to adult services: perspectives from adolescents with chronic diseases, caregivers and health professionals”. The information gathered through the qualitative methodology facilitated the understanding of critical points, barriers and facilitators of the transition process of adolescents with chronic diseases, considering the perspective of users and the health team. This study allowed the design of a transition services model from pediatric to adult health services based on the needs of adolescents with chronic diseases, their caregivers and the health team.

Methodologies used in Project Management

OpenAIRE

UNGUREANU, Adrian; UNGUREANU, Anca

2014-01-01

Undoubtedly, a methodology properly defined and strictly followed for project management provides a firm guarantee that the work will be done on time, in budget and according to specifications. A project management methodology in simple terms is a “must-have” to avoid failure and reduce risks, because is one of the critical success factors, such basic skills of the management team. This is the simple way to guide the team through the design and execution phases, processes and tasks throughout...

The GPT methodology. New fields of application

International Nuclear Information System (INIS)

Gandini, A.; Gomit, J.M.; Abramytchev, V.

1996-01-01

The GPT (Generalized Perturbation Theory) methodology is described, and a new application is discussed. The results obtained for a simple model (zero dimension, six parameters of interest) show that the expressions obtained using the GPT methodology, lead to results close to those obtained through direct calculations. The GPT methodology is useful to be used for radioactive waste disposal problems. The potentiality of the method linked to zero dimension model can be extended to radionuclide migration problems with space description. (K.A.)

Response Surface Methodology

NARCIS (Netherlands)

Kleijnen, Jack P.C.

2014-01-01

Abstract: This chapter first summarizes Response Surface Methodology (RSM), which started with Box and Wilson’s article in 1951 on RSM for real, non-simulated systems. RSM is a stepwise heuristic that uses first-order polynomials to approximate the response surface locally. An estimated polynomial

Effect of Doppler Radial Velocity Data Assimilation on the Simulation of a Typhoon Approaching Taiwan: A Case Study of Typhoon Aere (2004

Directory of Open Access Journals (Sweden)

Hsin-Hung Lin

2011-01-01

Full Text Available Compared to conventional data, radar observations have an advantage of high spatial and temporal resolutions, and Doppler radars are capable of capturing detailed characteristics of flow fields, including typhoon circulation. In this study, the possible improvement of short-term typhoon predictions near Taiwan, particularly with regard to related rainfall forecasts over the mountainous island, using Doppler radial wind observations is explored. The case of Typhoon Aere (2004 was chosen for study, and a series of experiments were carried out using the Penn State University/National Center for Atmospheric Research (PSU/NCAR Mesoscale Model Version 5 (MM5 with its three-dimensional variational (3D-VAR data assimilation system.

Palliative care for patients in the USA with amyotrophic lateral sclerosis: current challenges

Directory of Open Access Journals (Sweden)

Houseman G

2015-11-01

Full Text Available Gail Houseman,1 Mary Kelley2 1The ALS Association Greater Philadelphia Chapter, Ambler, PA, USA; 2Department of Neurology, ALS Center at Penn Medicine, Philadelphia, PA, USA Abstract: Amyotrophic lateral sclerosis (ALS is a motor neuron disease that results in eventual paralysis of all voluntary muscles. Cognitive impairment may be a co-occurring condition with the ALS patient. Palliative care, which involves symptom management, is the most utilized treatment of choice. Managing the symptoms of ALS can be challenging. This paper provides experience-based facts on daily care provision in the USA and some practical guidelines. Keywords: amyotrophic lateral sclerosis, ALS, palliative care, challenges, symptom management

Foreign language education: Principles of teaching English to adults at commercial language schools and centers

Directory of Open Access Journals (Sweden)

Oleg Tarnopolsky

2016-12-01

Full Text Available The ever-increasing spread of English as the language of global communication leads to ever-increasing demand for learning it among adult populations of non-English-speaking countries. If such people did not have a chance of acquiring English during their school or university years but urgently need it for professional or personal purposes, they have no other choice but to go and learn it at courses offered by numerous commercial language schools and centers. In post-Communist countries, such as Ukraine, commercial language schools and centers are responsible for English language training of the majority of adults learning that language after their secondary or tertiary school studies. They also serve the needs of many high and higher schools’ students who, due to various reasons, are not satisfied with learning English at their educational institutions. However, despite the importance and spread of this specific type of language education, its pedagogical and methodological foundations have hardly been developed at all. The present article is an attempt of partly filling this gap in pedagogy and methodology of English language education in non-English-speaking countries. The paper develops some theoretical underpinnings of that kind of education in the form of six principles underlying the organization of commercial English language courses, formulating their goals, selecting the learning contents, and choosing the methods of teaching and learning. The practical consequences of adopting the six suggested principles are outlined.

Introduction to methodology of dose-response meta-analysis for binary outcome: With application on software.

Science.gov (United States)

Zhang, Chao; Jia, Pengli; Yu, Liu; Xu, Chang

2018-05-01

Dose-response meta-analysis (DRMA) is widely applied to investigate the dose-specific relationship between independent and dependent variables. Such methods have been in use for over 30 years and are increasingly employed in healthcare and clinical decision-making. In this article, we give an overview of the methodology used in DRMA. We summarize the commonly used regression model and the pooled method in DRMA. We also use an example to illustrate how to employ a DRMA by these methods. Five regression models, linear regression, piecewise regression, natural polynomial regression, fractional polynomial regression, and restricted cubic spline regression, were illustrated in this article to fit the dose-response relationship. And two types of pooling approaches, that is, one-stage approach and two-stage approach are illustrated to pool the dose-response relationship across studies. The example showed similar results among these models. Several dose-response meta-analysis methods can be used for investigating the relationship between exposure level and the risk of an outcome. However the methodology of DRMA still needs to be improved. © 2018 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Blanket safety by GEMSAFE methodology

International Nuclear Information System (INIS)

Sawada, Tetsuo; Saito, Masaki

2001-01-01

General Methodology of Safety Analysis and Evaluation for Fusion Energy Systems (GEMSAFE) has been applied to a number of fusion system designs, such as R-tokamak, Fusion Experimental Reactor (FER), and the International Thermonuclear Experimental Reactor (ITER) designs in the both stages of Conceptual Design Activities (CDA) and Engineering Design Activities (EDA). Though the major objective of GEMSAFE is to reasonably select design basis events (DBEs) it is also useful to elucidate related safety functions as well as requirements to ensure its safety. In this paper, we apply the methodology to fusion systems with future tritium breeding blankets and make clear which points of the system should be of concern from safety ensuring point of view. In this context, we have obtained five DBEs that are related to the blanket system. We have also clarified the safety functions required to prevent accident propagations initiated by those blanket-specific DBEs. The outline of the methodology is also reviewed. (author)

Energy Efficiency Indicators Methodology Booklet

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

2010-05-01

This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

Stephenson Cancer Center

Science.gov (United States)

Stephenson Cancer Center at the University of Oklahoma in Oklahoma City is an NCI-designated cancer center at the forefront of NCI-supported cancer research. Learn more about the Stephenson Cancer Center's mission.

A METHOD OF DETERMINING THE COORDINATES OF THE STIFFNESS CENTER AND THE STIFFNESS PRINCIPAL AXIS OF THE VIBRATING SYSTEM WITH DAMPING

OpenAIRE

Dang Xuan Truong; Tran Duc Chinh

2014-01-01

The report presents a methodology to determine the directions of the stiffness principal axis (in this case subject to the linear displacement and forced rotation angle) of a solid object interact with the surrounding environment by resilient bearing supports. The results also show that determining the coordinates of the stiffness center in the vibrating system with damping factors is necessary in our research.

METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (THEORETICAL AND METHODOLOGICAL FOUNDATIONS OF VOCATIONAL TEACHER EDUCATION

Directory of Open Access Journals (Sweden)

E. M. Dorozhkin

2014-01-01

Full Text Available The study is aimed at investigating a justification of the new approach to the problem of vocational education development through the prism of interdependence research methodology and practice. This conceptual setup allows determining the main directions for teacher training modernization of vocational schools.The authors note that the current socio-economic situation in our country has actualized the problem of personnel training. Politicians, economists and scientists’ speeches are all about the shortage of skilled personnel. They see the main reason of this catastrophic situation in the present system of primary andsecondary vocational education. At least they concern over the current practice of pedagogical personnel training of vocational education who are to restore the system of vocational education. Our country, Russia has a great positive experience in solving this problem. Scientific-methodological centre for vocational teacher education is the Russian State Vocational Pedagogical University under the scientific direction of Academicianof the Russian Academy of Education, G. M. Romantsev. The reflection of scientific-theoretical bases of this education led the authors to the analysis and designing (formation of existent and new professional and pedagogical methodology. Methods. The fundamental position of A. M. Novikov on the generality of theresearch (scientific and practical activity methodology has become the theoretical platform of the present study. Conceptual field, conceptual statements and professional model are presented as the whole system (or integrating factor. The theoretical framework has determined the logic of the study and its results.Scientific and educational methodology differentiation in terms of the subject of cogni live activity has allowed identifying the main scientific and practical disciplines of vocational teacher education. The creative concept as the subject ground is instrumental

Soft Systems Methodology

Science.gov (United States)

Checkland, Peter; Poulter, John

Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

Nuclear EMP: ingredients of an EMP protection engineering methodology

International Nuclear Information System (INIS)

Latorre, V.R.; Spogen, L.R. Jr.

1977-02-01

A fundamental methodology of electromagnetic pulse (EMP) protection engineering is described. Operations performed within the framework of this methodology are discussed. These operations, along with problem constraints and data, constitute the essential ingredients needed to implement the overall engineering methodology. Basic definitions and descriptions of these essential ingredients are provided. The issues discussed represent the first step in developing a methodology for protecting systems against EMP effects

The BirthPlace collaborative practice model: results from the San Diego Birth Center Study.

Science.gov (United States)

Swartz; Jackson; Lang; Ecker; Ganiats; Dickinson; Nguyen

1998-07-01

compared along with cost-effectiveness and acceptance of the model by patients. Data collection occurred primarily through medical record abstraction with the addition of two patient questionnaires. Comparability of the cohorts was established by using a validated methodology to determine medical/perinatal risk and birth center eligibility, which included assessment by two CNMs and an independent blind review by a perinatologist. The cost analysis uses a resource-utilization approach and new methodologies such as activity-based-costing to compare costs from both the perspective of the payor and the health care provider. Patient satisfaction was measured using a self-administered patient questionnaire.Results: Current preliminary results from approximately 38% of the final expected study sample are available. Crude and adjusted analysis have been conducted. Overall, the preliminary results suggest similar morbidity and mortality in the two groups. Fetal deaths are 0.75% in the index and 0.64% in the comparison group, with early neonatal deaths at 0.26% and 0.23%, respectively. The traditional care group showed adjusted rate differences of 5.83% more major maternal intrapartum complications and 9% more NICU admissions. While the birth center group showed adjusted rate differences of 5.5% more low birth weight and 0.95% more preterm birth. For other outcomes, the birth center group showed an adjusted rate difference of 22.34% more exclusive breastfeeding at discharge. Also, there was less utilization of cesarean section and assisted delivery in the birth center group as compared to the traditional care group. The adjusted rate difference for normal spontaneous vaginal deliveries in nulliparas was 10.23% more in the birth center group, with similar results in multiparas with and without history of cesarean (28.88% and 7.84%, respectively). Preliminary results also show that the average total cost for pregnancy-related services paid by California Medicaid was $4,550 for the

Engineer Research and Development Center's Materials Testing Center (MTC)

Data.gov (United States)

Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...