Methodological approaches to the assessment level of social responsibility

OpenAIRE

Vorona, E.

2010-01-01

A study of current approaches to assessing the level of social responsibility. Proposed methodological approach to evaluating the performance of the social responsibility of railway transport. Conceptual Basis of social reporting in rail transport.

CULTUROLOGICAL APPROACH AS METHODOLOGICAL BASIS OF MATHEMATICAL EDUCATION

Directory of Open Access Journals (Sweden)

Ye. A. Perminov

2017-01-01

Full Text Available Introduction. Today, in the era of a mathematization of science and total expansion of digital technologies, mass mathematical education becomes a necessary part of culture of every person. However, there are some serious obstacles to formation and development of general mathematical culture: insufficient understanding of its importance by society and the state; fragmentary-clipconsciousness, emerging among representatives of the younger generation under the influence of the Internet, and preventing formation of a complete picture of the modern world; traditional system of disjointed subjects and courses in school, secondary vocational and high school mathematics education; non-cognitive (automatic transferring of the approaches, principles, technologies and techniques into training which are not specific in order to master a course. Development of sociological, axiological and especially culturological aspects of mathematical methodology is required for the solution of the urgent problems of methodology in mathematical education.The aim of the publication is to discuss methodological aspects of culturological approach realization in mathematical education.Methodology and research methods. The theoretical scientific methods of the present article involve analysis and synthesis of the content of philosophical, mathematical, pedagogical, methodological literature and normative documents; comparative, culturological and logical types of analysis of mathematical education; systematic, competence-based, practice-oriented and personal-activity metho-dological approaches were used to understand the concept of mathematical education.Results and scientific novelty. The practicability and leading role of culturological approach to promoting mathematical knowledge is proved from historical, philosophical and pedagogical positions. It is stated that objective conceptualization of progressive ideas and new methods of mathematical science and mathematical

Evaluation of the methodology for dose calculation in microdosimetry with electrons sources using the MCNP5 Code

International Nuclear Information System (INIS)

Cintra, Felipe Belonsi de

2010-01-01

This study made a comparison between some of the major transport codes that employ the Monte Carlo stochastic approach in dosimetric calculations in nuclear medicine. We analyzed in detail the various physical and numerical models used by MCNP5 code in relation with codes like EGS and Penelope. The identification of its potential and limitations for solving microdosimetry problems were highlighted. The condensed history methodology used by MCNP resulted in lower values for energy deposition calculation. This showed a known feature of the condensed stories: its underestimates both the number of collisions along the trajectory of the electron and the number of secondary particles created. The use of transport codes like MCNP and Penelope for micrometer scales received special attention in this work. Class I and class II codes were studied and their main resources were exploited in order to transport electrons, which have particular importance in dosimetry. It is expected that the evaluation of available methodologies mentioned here contribute to a better understanding of the behavior of these codes, especially for this class of problems, common in microdosimetry. (author)

Evaluating Electronic Reference Services: Issues, Approaches and Criteria.

Science.gov (United States)

Novotny, Eric

2001-01-01

Discussion of electronic library reference services focuses on an overview of the chief methodologies available for conducting assessments of electronic services. Highlights include quantitative measures and benchmarks, including equity and access; quality measures; behavioral aspects of quality, including librarian-patron interaction; and future…

A methodological approach to designing sewer system control

DEFF Research Database (Denmark)

Mollerup, Ane Loft

for this thesis was therefore the wish for a methodological approach to sewer system control design. Using a case study the following research hypothesis was tested in this thesis: Using classical and modern control theory, a methodological approach can be derived for designing sewer system control. This can aid....... This was not unexpected, since the true potential of having optimisation arises, when a system has many control loops with limit-ing constraints and/or changing prioritisation between them. The results showed that for small sewer systems, where the complexity is limited, it is not necessarily the best option to implement...... generate control systems of the future that are more robust, more structured, have a better performance and are easi-er to maintain....

Development of an electron paramagnetic resonance methodology for studying the photo-generation of reactive species in semiconductor nano-particle assembled films

Science.gov (United States)

Twardoch, Marek; Messai, Youcef; Vileno, Bertrand; Hoarau, Yannick; Mekki, Djamel E.; Felix, Olivier; Turek, Philippe; Weiss, Jean; Decher, Gero; Martel, David

2018-06-01

An experimental approach involving electron paramagnetic resonance is proposed for studying photo-generated reactive species in semiconductor nano-particle-based films deposited on the internal wall of glass capillaries. This methodology is applied here to nano-TiO2 and allows a semi-quantitative analysis of the kinetic evolutions of radical production using a spin scavenger probe.

Soft systems methodology as a systemic approach to nuclear safety management

International Nuclear Information System (INIS)

Vieira Neto, Antonio S.; Guilhen, Sabine N.; Rubin, Gerson A.; Caldeira Filho, Jose S.; Camargo, Iara M.C.

2017-01-01

Safety approach currently adopted by nuclear installations is built almost exclusively upon analytical methodologies based, mainly, on the belief that the properties of a system, such as its safety, are given by its constituent parts. This approach, however, does not properly address the complex dynamic interactions between technical, human and organizational factors occurring within and outside the organization. After the accident at Fukushima Daiichi nuclear power plant in March 2011, experts of the International Atomic Energy Agency (IAEA) recommended a systemic approach as a complementary perspective to nuclear safety. The aim of this paper is to present an overview of the systems thinking approach and its potential use for structuring socio technical problems involved in the safety of nuclear installations, highlighting the methodologies related to the soft systems thinking, in particular the Soft Systems Methodology (SSM). The implementation of a systemic approach may thus result in a more holistic picture of the system by the complex dynamic interactions between technical, human and organizational factors. (author)

Soft systems methodology as a systemic approach to nuclear safety management

Energy Technology Data Exchange (ETDEWEB)

Vieira Neto, Antonio S.; Guilhen, Sabine N.; Rubin, Gerson A.; Caldeira Filho, Jose S.; Camargo, Iara M.C., E-mail: asvneto@ipen.br, E-mail: snguilhen@ipen.br, E-mail: garubin@ipen.br, E-mail: jscaldeira@ipen.br, E-mail: icamargo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNE-SP), Sao Paulo, SP (Brazil)

2017-07-01

Safety approach currently adopted by nuclear installations is built almost exclusively upon analytical methodologies based, mainly, on the belief that the properties of a system, such as its safety, are given by its constituent parts. This approach, however, does not properly address the complex dynamic interactions between technical, human and organizational factors occurring within and outside the organization. After the accident at Fukushima Daiichi nuclear power plant in March 2011, experts of the International Atomic Energy Agency (IAEA) recommended a systemic approach as a complementary perspective to nuclear safety. The aim of this paper is to present an overview of the systems thinking approach and its potential use for structuring socio technical problems involved in the safety of nuclear installations, highlighting the methodologies related to the soft systems thinking, in particular the Soft Systems Methodology (SSM). The implementation of a systemic approach may thus result in a more holistic picture of the system by the complex dynamic interactions between technical, human and organizational factors. (author)

Project-Based Learning and Agile Methodologies in Electronic Courses: Effect of Student Population and Open Issues

Directory of Open Access Journals (Sweden)

Marina Zapater

2013-12-01

Full Text Available Project-Based Learning (PBL and Agile methodologies have proven to be very interesting instructional strategies in Electronics and Engineering education, because they provide practical learning skills that help students understand the basis of electronics. In this paper we analyze two courses, one belonging to a Master in Electronic Engineering and one to a Bachelor in Telecommunication Engineering that apply Agile-PBL methodologies, and compare the results obtained in both courses with a traditional laboratory course. Our results support previous work stating that Agile-PBL methodologies increase student satisfaction. However, we also highlight some open issues that negatively affect the implementation of these methodologies,such as planning overhead or accidental complexity. Moreover,we show how differences in the student population, mostly related to the time spent on-campus, their commitment to the course or part-time dedication, have an impact on the benefits of Agile-PBL methods. In these cases, Agile-PBL methodologies by themselves are not enough and need to be combined with other techniques to increase student motivation.

Methodological approach to strategic performance optimization

OpenAIRE

Hell, Marko; Vidačić, Stjepan; Garača, Željko

2009-01-01

This paper presents a matrix approach to the measuring and optimization of organizational strategic performance. The proposed model is based on the matrix presentation of strategic performance, which follows the theoretical notions of the balanced scorecard (BSC) and strategy map methodologies, initially developed by Kaplan and Norton. Development of a quantitative record of strategic objectives provides an arena for the application of linear programming (LP), which is a mathematical tech...

Electron microscopy approach for the visualization of the epithelial and endothelial glycocalyx.

Science.gov (United States)

Chevalier, L; Selim, J; Genty, D; Baste, J M; Piton, N; Boukhalfa, I; Hamzaoui, M; Pareige, P; Richard, V

2017-06-01

This study presents a methodological approach for the visualization of the glycocalyx by electron microscopy. The glycocalyx is a three dimensional network mainly composed of glycolipids, glycoproteins and proteoglycans associated with the plasma membrane. Since less than a decade, the epithelial and endothelial glycocalyx proved to play an important role in physiology and pathology, increasing its research interest especially in vascular functions. Therefore, visualization of the glycocalyx requires reliable techniques and its preservation remains challenging due to its fragile and dynamic organization, which is highly sensitive to the different process steps for electron microscopy sampling. In this study, chemical fixation was performed by perfusion as a good alternative to conventional fixation. Additional lanthanum nitrate in the fixative enhances staining of the glycocalyx in transmission electron microscopy bright field and improves its visualization by detecting the elastic scattered electrons, thus providing a chemical contrast. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

METHODOLOGICAL APPROACHES TO ORGANIZATION OF SAFE INFORMATION AND EDUCATIONAL ENVIRONMENT OF THE UNIVERSITY

Directory of Open Access Journals (Sweden)

A. N. Privalov

2017-01-01

Full Text Available Introduction. One of the tendencies of modern higher education is the ubiquitous use of information and communication technologies. At the same time, the functioning of the electronic information and educational environment (IEE of the university should be based on the means of IEE and the condition of its information security.The aim of the research is conceptualization of a problem of the rational organization of the safe information and education environment of higher education institution wherein reliable protection of its infrastructure, the personal and unique information of a pupil and teacher and virtual space of their educational interaction is provided.Methodology and research methods. System-based approach is a key approach to organization of safe educational environment of the university. From the point of view of authors, personal-activity and functional approaches are expedient while designing and development of a safe IEE. Socio-historical and theoretical-methodological analysis, modeling, research and synthesis of experience of effective application of the systems approach in educational professional organizations are used.Results and scientific novelty. The concept «safe information educational environment of the university» is specified wherein the first word has to express a predominant quality of the system. Creating a safe information environment in educational professional organizations provides a convenient and safe educational environment in the process of professional training of university students. The components and directions for the organization of the safe IEE are highlighted. Practical recommendations for its design and successful functioning are given.Practical significance. The materials of the present research can be demanded by managers and administrative employees of educational organizations. 

Representing electrons a biographical approach to theoretical entities

CERN Document Server

Arabatzis, Theodore

2006-01-01

Both a history and a metahistory, Representing Electrons focuses on the development of various theoretical representations of electrons from the late 1890s to 1925 and the methodological problems associated with writing about unobservable scientific entities. Using the electron-or rather its representation-as a historical actor, Theodore Arabatzis illustrates the emergence and gradual consolidation of its representation in physics, its career throughout old quantum theory, and its appropriation and reinterpretation by chemists. As Arabatzis develops this novel biographical

Integrated methodology for production related risk management of vehicle electronics (IMPROVE)

OpenAIRE

Geis, Stefan Rafael

2006-01-01

This scientific work is designated to provide an innovative and integrated conceptional approach to improve the assembly quality of automotive electronics. This is achieved by the reduction and elimination of production related risks of automotive electronics and the implementation of a sustainable solution process. The focus is the development and implementation of an integrated technical risk management approach for automotive electronics throughout the vehicle life cycle and the vehicle pr...

Methodological approach to participatory formulation of agricultural technical assistance plans with territorial approach

Directory of Open Access Journals (Sweden)

Holmes Rodríguez Espinosa

2015-10-01

Full Text Available The collective identification of needs and shared decision-making in projects’ formulation for agricultural development is a process that requires the identification of participatory methodologies to promote active and reflective engagement of producers. The aim of this study was to evaluate a methodological approach for participatory formulation of technical assistance plan with territorial approach. Matrix analysis for the identification and prioritization of the most limiting technical assistance factors for milk production was performed and alternative solutions were defined, through participatory workshops with farmers. The results show the advantages of a collective reflection with stakeholders and quantitative tools reducing subjectivity in decision-making, improving participation in their own development and identifying acceptable alternatives to farmers and viable to the municipality in order to improve lack of pasture and forage management, implementation of good agricultural practices GAP and rational use of agrochemicals.

Electronics a systems approach

CERN Document Server

Storey, Neil

2017-01-01

Electronics plays a central role in our everyday lives. It is at the heart of almost all of today's essential technology, from mobile phones to computers and from cars to power stations. As such, all engineers, scientists and technologists need to have a fundamental understanding of this exciting subject, and for many this will just be the beginning. Now in its sixth edition, Electronics: A Systems Approach provides an outstanding introduction to this fast-moving and important field. Comprehensively revised and updated to cover the latest developments in the world of electronics, the text continues to use Neil Storey's established and well-respected systems approach. It introduces the basic concepts first before progressing to a more advanced analysis, enabling you to contextualise what a system is designed to achieve before tackling the intricacies of designing or analysing its various components with confidence. This book is accompanied by a website which contains over 100 video tutorials to help explain ke...

Methodological approach to organizational performance improvement process

OpenAIRE

Buble, Marin; Dulčić, Želimir; Pavić, Ivan

2017-01-01

Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

A Study on Technology Architecture and Serving Approaches of Electronic Government System

Science.gov (United States)

Liu, Chunnian; Huang, Yiyun; Pan, Qin

As E-government becomes a very active research area, a lot of solutions to solve citizens' needs are being deployed. This paper provides technology architecture of E-government system and approaches of service in Public Administrations. The proposed electronic system addresses the basic E-government requirements of user friendliness, security, interoperability, transparency and effectiveness in the communication between small and medium sized public organizations and their citizens, businesses and other public organizations. The paper has provided several serving approaches of E-government, which includes SOA, web service, mobile E-government, public library and every has its own characteristics and application scenes. Still, there are a number of E-government issues for further research on organization structure change, including research methodology, data collection analysis, etc.

Critical dialogical approach: A methodological direction for occupation-based social transformative work.

Science.gov (United States)

Farias, Lisette; Laliberte Rudman, Debbie; Pollard, Nick; Schiller, Sandra; Serrata Malfitano, Ana Paula; Thomas, Kerry; van Bruggen, Hanneke

2018-05-03

Calls for embracing the potential and responsibility of occupational therapy to address socio-political conditions that perpetuate occupational injustices have materialized in the literature. However, to reach beyond traditional frameworks informing practices, this social agenda requires the incorporation of diverse epistemological and methodological approaches to support action commensurate with social transformative goals. Our intent is to present a methodological approach that can help extend the ways of thinking or frameworks used in occupational therapy and science to support the ongoing development of practices with and for individuals and collectives affected by marginalizing conditions. We describe the epistemological and theoretical underpinnings of a methodological approach drawing on Freire and Bakhtin's work. Integrating our shared experience taking part in an example study, we discuss the unique advantages of co-generating data using two methods aligned with this approach; dialogical interviews and critical reflexivity. Key considerations when employing this approach are presented, based on its proposed epistemological and theoretical stance and our shared experiences engaging in it. A critical dialogical approach offers one way forward in expanding occupational therapy and science scholarship by promoting collaborative knowledge generation and examination of taken-for-granted understandings that shape individuals assumptions and actions.

Methodological approach to organizational performance improvement process

Directory of Open Access Journals (Sweden)

Marin Buble

2001-01-01

Full Text Available Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

Approaches to qualitative research in mathematics education examples of methodology and methods

CERN Document Server

Bikner-Ahsbahs, Angelika; Presmeg, Norma

2014-01-01

This volume documents a range of qualitative research approaches emerged within mathematics education over the last three decades, whilst at the same time revealing their underlying methodologies. Continuing the discussion as begun in the two 2003 ZDM issues dedicated to qualitative empirical methods, this book presents astate of the art overview on qualitative research in mathematics education and beyond. The structure of the book allows the reader to use it as an actual guide for the selection of an appropriate methodology, on a basis of both theoretical depth and practical implications. The methods and examples illustrate how different methodologies come to life when applied to a specific question in a specific context. Many of the methodologies described are also applicable outside mathematics education, but the examples provided are chosen so as to situate the approach in a mathematical context.

Structured methodology review identified seven (RETREAT) criteria for selecting qualitative evidence synthesis approaches.

Science.gov (United States)

Booth, Andrew; Noyes, Jane; Flemming, Kate; Gerhardus, Ansgar; Wahlster, Philip; van der Wilt, Gert Jan; Mozygemba, Kati; Refolo, Pietro; Sacchini, Dario; Tummers, Marcia; Rehfuess, Eva

2018-07-01

To compare and contrast different methods of qualitative evidence synthesis (QES) against criteria identified from the literature and to map their attributes to inform selection of the most appropriate QES method to answer research questions addressed by qualitative research. Electronic databases, citation searching, and a study register were used to identify studies reporting QES methods. Attributes compiled from 26 methodological papers (2001-2014) were used as a framework for data extraction. Data were extracted into summary tables by one reviewer and then considered within the author team. We identified seven considerations determining choice of methods from the methodological literature, encapsulated within the mnemonic Review question-Epistemology-Time/Timescale-Resources-Expertise-Audience and purpose-Type of data. We mapped 15 different published QES methods against these seven criteria. The final framework focuses on stand-alone QES methods but may also hold potential when integrating quantitative and qualitative data. These findings offer a contemporary perspective as a conceptual basis for future empirical investigation of the advantages and disadvantages of different methods of QES. It is hoped that this will inform appropriate selection of QES approaches. Copyright © 2018 Elsevier Inc. All rights reserved.

Life cycle costing of food waste: A review of methodological approaches.

Science.gov (United States)

De Menna, Fabio; Dietershagen, Jana; Loubiere, Marion; Vittuari, Matteo

2018-03-01

Food waste (FW) is a global problem that is receiving increasing attention due to its environmental and economic impacts. Appropriate FW prevention, valorization, and management routes could mitigate or avoid these effects. Life cycle thinking and approaches, such as life cycle costing (LCC), may represent suitable tools to assess the sustainability of these routes. This study analyzes different LCC methodological aspects and approaches to evaluate FW management and valorization routes. A systematic literature review was carried out with a focus on different LCC approaches, their application to food, FW, and waste systems, as well as on specific methodological aspects. The review consisted of three phases: a collection phase, an iterative phase with experts' consultation, and a final literature classification. Journal papers and reports were retrieved from selected databases and search engines. The standardization of LCC methodologies is still in its infancy due to a lack of consensus over definitions and approaches. Research on the life cycle cost of FW is limited and generally focused on FW management, rather than prevention or valorization of specific flows. FW prevention, valorization, and management require a consistent integration of LCC and Life Cycle Assessment (LCA) to avoid tradeoffs between environmental and economic impacts. This entails a proper investigation of methodological differences between attributional and consequential modelling in LCC, especially with regard to functional unit, system boundaries, multi-functionality, included cost, and assessed impacts. Further efforts could also aim at finding the most effective and transparent categorization of costs, in particular when dealing with multiple stakeholders sustaining costs of FW. Interpretation of results from LCC of FW should take into account the effect on larger economic systems. Additional key performance indicators and analytical tools could be included in consequential approaches

METHODOLOGICAL APPROACHES AND CHALLENGES IN ASSESSING THE VALUE OF INTELLECTUAL CAPITAL

Directory of Open Access Journals (Sweden)

E. D. Katulskij

2016-01-01

Full Text Available Presence at the enterprise znanievyh resources determines its capacity for sustainable and competitive development. The set of knowledge, skills and abilities (which has operational and management personnel, including transformed in intangible and other assets are considered to be the intellectual capital of the enterprise. Empirically, the presence of the intellectual capital of the enterprise can be identified by its success in the market and the ability to generate a high value added product. However, scientific and methodological point of view, approaches to assessing intellectual capital are currently not standardized and do not provide an objective valuation of the capital.This paper presents an overview of the methodological approaches to the valuation of the intellectual capital of companies and shows the problems of using these approaches in analytical procedures. Based on the materials conclusion about the necessity of further development of the intellectual capital evaluation methods enterprises it was made.The purpose / goal. The purpose of this article is to study the specifics of basic methodological approaches to the valuation of the intellectual capital of enterprises. Moreover, among the main tasks is to provide: an analysis of the most frequently used techniques in the Russian and international practice, assessment of intellectual capital.Methodology. The article is a content analysis of the theoretical and scientific-methodical positions, describing the key and the most frequently used Russian and international approaches to the evaluation of the intellectual capital of enterprises.Conclusions / relevance. The practical significance of this paper is to identify the main issues that arise in the evaluation of the intellectual capital of the enterprises, which determines the need for further scientific development and complement the currently used evaluation methods.

Methodologic model to scheduling on service systems: a software engineering approach

Directory of Open Access Journals (Sweden)

Eduyn Ramiro Lopez-Santana

2016-06-01

Full Text Available This paper presents an approach of software engineering to a research proposal to make an Expert System to scheduling on service systems using methodologies and processes of software development. We use the adaptive software development as methodology for the software architecture based on the description as a software metaprocess that characterizes the research process. We make UML’s diagrams (Unified Modeling Language to provide a visual modeling that describes the research methodology in order to identify the actors, elements and interactions in the research process.

A Methodological Approach to the Materiality of Clothing

DEFF Research Database (Denmark)

Klepp, Ingun Grimstad; Bjerck, Mari

2014-01-01

The material is not just ‘a carrier’ of different types of symbols, but an active element in the practices. Bringing this to the fore requires new research methods. This article discusses a methodological approach, we call it a wardrobe study, which allows for the analysis of the way in which...... clothes relate to each other on the whole or within parts of the wardrobe. More specifically, we discuss how this method can contribute to increasing the materiality of clothes studies. The theoretical point of departure for this approach is a practice theory in which the material enters as an integral...

Radio drama adaptations: an approach towards an analytical methodology

NARCIS (Netherlands)

Huwiler, E.

2010-01-01

This article establishes a methodology with which radio drama pieces can be analysed. It thereby integrates all features the art form has to offer: voices, music, noises, but also technical features like cutting and mixing contribute to the narrative that is being told. This approach emphasizes the

Methodological Approaches to Experimental Teaching of Mathematics to University Students

Directory of Open Access Journals (Sweden)

Nikolay I.

2018-03-01

Full Text Available Introduction: the article imparts authors’ thoughtson a new teaching methodology for mathematical education in universities. The aim of the study is to substantiate the efficiency of the comprehensive usage of mathematical electronic courses, computer tests, original textbooks and methodologies when teaching mathematics to future agrarian engineers. The authors consider this implementation a unified educational process. Materials and Methods: the synthesis of international and domestic pedagogical experience of teaching students in university and the following methods of empirical research were used: pedagogical experiment, pedagogical measurementsand experimental teaching of mathematics. The authors applied the methodology of revealing interdisciplinary links on the continuum of mathematical problems using the key examples and exercises. Results: the online course “Mathematics” was designed and developed on the platform of Learning Management System Moodle. The article presents the results of test assignments assessing students’ intellectual abilities and analysis of solutions of various types of mathematical problems by students. The pedagogical experiment substantiated the integrated selection of textbooks, online course and online tests using the methodology of determination of the key examples and exercises. Discussion and Conclusions: the analysis of the experimental work suggested that the new methodology is able to have positive effect on the learning process. The learning programme determined the problem points for each student. The findings of this study have a number of important implications for future educational practice.

METHODOLOGICAL APPROACHES FOR MODELING THE RURAL SETTLEMENT DEVELOPMENT

Directory of Open Access Journals (Sweden)

Gorbenkova Elena Vladimirovna

2017-10-01

Full Text Available Subject: the paper describes the research results on validation of a rural settlement developmental model. The basic methods and approaches for solving the problem of assessment of the urban and rural settlement development efficiency are considered. Research objectives: determination of methodological approaches to modeling and creating a model for the development of rural settlements. Materials and methods: domestic and foreign experience in modeling the territorial development of urban and rural settlements and settlement structures was generalized. The motivation for using the Pentagon-model for solving similar problems was demonstrated. Based on a systematic analysis of existing development models of urban and rural settlements as well as the authors-developed method for assessing the level of agro-towns development, the systems/factors that are necessary for a rural settlement sustainable development are identified. Results: we created the rural development model which consists of five major systems that include critical factors essential for achieving a sustainable development of a settlement system: ecological system, economic system, administrative system, anthropogenic (physical system and social system (supra-structure. The methodological approaches for creating an evaluation model of rural settlements development were revealed; the basic motivating factors that provide interrelations of systems were determined; the critical factors for each subsystem were identified and substantiated. Such an approach was justified by the composition of tasks for territorial planning of the local and state administration levels. The feasibility of applying the basic Pentagon-model, which was successfully used for solving the analogous problems of sustainable development, was shown. Conclusions: the resulting model can be used for identifying and substantiating the critical factors for rural sustainable development and also become the basis of

Developing TheoreticalMethodological Approaches to Assessment of Export Potential of Ukrainian Enterprises

Directory of Open Access Journals (Sweden)

Matyushenko Igor Yu.

2016-02-01

Full Text Available The article is aimed at studying the existing theoretical-methodological approaches to the analysis and assessment of export potential. The opinions by scientists regarding the disclosure of the categorial content of the concept of «export potential» have been considered, an own definition of the indicated economic category has been suggested. The main types of analytical procedures for assessment have been classified, some authorial methodical approaches to determine the level of export potential have been analyzed. The export potential of a hypothetical enterprise has been calculated by the selected methodologies of assessment. The urgency of improving and refining existing methods to implement more detailed and quantitative analysis has been substantiated. It has been suggested to implement a prognosis assessment of export potential of enterprises by combining the results of several methodologies in the aggregate indicator of export potential efficiency. A prognosis model for the dynamics of export potential of a hypothetical enterprise has been built, value of the aggregate indicator has been calculated on the basis of three selected valuation methodologies.

The Methodological Approaches to Formation of the Internal System of Quality of Education of Higher Education Institution

Directory of Open Access Journals (Sweden)

Doronin Stepan A.

2017-12-01

Full Text Available The necessity of creation of a national conception of formation of the internal system of quality assurance of higher education institutions with obligatory introduction of methodological approach in its structure is substantiated; the variant of its terminological provision with clarification of the content of concepts of «quality of education», «internal system of quality of education», «methodological approach» is proposed; positioning of the approach in the system of other standard scientific instruments (method, methodology, program, algorithm is done; arguments for the orientation of the methodology of formation of the internal system of quality assurance of higher education institutions towards the socio-cultural model of paradigm are provided; a hierarchical classification of methodological approaches with allocation of the philosophical, scientific, concrete-scientific, technological levels and the characteristics of their purpose and contents is presented.

The Assessment Methodology RADAR – A Theoretical Approach of a Methodology for Coordinating the Efforts to Improve the Organizational Processes to Achieve Excellence

Directory of Open Access Journals (Sweden)

Cristina Raluca Popescu

2015-05-01

Full Text Available In the paper “The Assessment Methodology RADAR – A Theoretical Approach of a Methodology for Coordinating the Efforts to Improve the Organizational Processes to Achieve Excellence” the authors present the basic features of the assessment methodology RADAR that is designed to coordinate the efforts to improve the organizational processes in order to achieve excellence.

A simple methodology for obtaining X-ray color images in scanning electron microscopy

International Nuclear Information System (INIS)

Veiga, M.M. da; Pietroluongo, L.R.V.

1985-01-01

A simple methodology for obtaining at least 3 elements X-ray images in only one photography is described. The fluorescent X-ray image is obtained from scanning electron microscopy with energy dispersion analysis system. The change of detector analytic channels, color cellophane foils and color films are used sequentially. (M.C.K.) [pt

Development of the methodology and approaches to validate safety and accident management

International Nuclear Information System (INIS)

Asmolov, V.G.

1997-01-01

The article compares the development of the methodology and approaches to validate the nuclear power plant safety and accident management in Russia and advanced industrial countries. It demonstrates that the development of methods of safety validation is dialectically related to the accumulation of the knowledge base on processes and events during NPP normal operation, transients and emergencies, including severe accidents. The article describes the Russian severe accident research program (1987-1996), the implementation of which allowed Russia to reach the world level of the safety validation efforts, presents future high-priority study areas. Problems related to possible approaches to the methodological accident management development are discussed. (orig.)

A methodology for finding the optimal iteration number of the SIRT algorithm for quantitative Electron Tomography

Energy Technology Data Exchange (ETDEWEB)

Okariz, Ana, E-mail: ana.okariz@ehu.es [eMERG, Fisika Aplikatua I Saila, Faculty of Engineering, University of the Basque Country, UPV/EHU, Rafael Moreno “Pitxitxi” Pasealekua 3, 48013 Bilbao (Spain); Guraya, Teresa [eMERG, Departamento de Ingeniería Minera y Metalúrgica y Ciencia de los Materiales, Faculty of Engineering, University of the Basque Country, UPV/EHU, Rafael Moreno “Pitxitxi” Pasealekua 3, 48013 Bilbao (Spain); Iturrondobeitia, Maider [eMERG, Departamento de Expresión Gráfica y Proyectos de Ingeniería, Faculty of Engineering, University of the Basque Country, UPV/EHU, Rafael Moreno “Pitxitxi” Pasealekua 3, 48013 Bilbao (Spain); Ibarretxe, Julen [eMERG, Fisika Aplikatua I Saila, Faculty of Engineering,University of the Basque Country, UPV/EHU, Rafael Moreno “Pitxitxi” Pasealekua 2, 48013 Bilbao (Spain)

2017-02-15

The SIRT (Simultaneous Iterative Reconstruction Technique) algorithm is commonly used in Electron Tomography to calculate the original volume of the sample from noisy images, but the results provided by this iterative procedure are strongly dependent on the specific implementation of the algorithm, as well as on the number of iterations employed for the reconstruction. In this work, a methodology for selecting the iteration number of the SIRT reconstruction that provides the most accurate segmentation is proposed. The methodology is based on the statistical analysis of the intensity profiles at the edge of the objects in the reconstructed volume. A phantom which resembles a a carbon black aggregate has been created to validate the methodology and the SIRT implementations of two free software packages (TOMOJ and TOMO3D) have been used. - Highlights: • The non uniformity of the resolution in electron tomography reconstructions has been demonstrated. • An overall resolution for the evaluation of the quality of electron tomography reconstructions has been defined. • Parameters for estimating an overall resolution across the reconstructed volume have been proposed. • The overall resolution of the reconstructions of a phantom has been estimated from the probability density functions. • It has been proven that reconstructions with the best overall resolutions have provided the most accurate segmentations.

A methodology for finding the optimal iteration number of the SIRT algorithm for quantitative Electron Tomography

International Nuclear Information System (INIS)

Okariz, Ana; Guraya, Teresa; Iturrondobeitia, Maider; Ibarretxe, Julen

2017-01-01

The SIRT (Simultaneous Iterative Reconstruction Technique) algorithm is commonly used in Electron Tomography to calculate the original volume of the sample from noisy images, but the results provided by this iterative procedure are strongly dependent on the specific implementation of the algorithm, as well as on the number of iterations employed for the reconstruction. In this work, a methodology for selecting the iteration number of the SIRT reconstruction that provides the most accurate segmentation is proposed. The methodology is based on the statistical analysis of the intensity profiles at the edge of the objects in the reconstructed volume. A phantom which resembles a a carbon black aggregate has been created to validate the methodology and the SIRT implementations of two free software packages (TOMOJ and TOMO3D) have been used. - Highlights: • The non uniformity of the resolution in electron tomography reconstructions has been demonstrated. • An overall resolution for the evaluation of the quality of electron tomography reconstructions has been defined. • Parameters for estimating an overall resolution across the reconstructed volume have been proposed. • The overall resolution of the reconstructions of a phantom has been estimated from the probability density functions. • It has been proven that reconstructions with the best overall resolutions have provided the most accurate segmentations.

A Model for Electronic Good Governance in Electronic Learning Sector of Iran

Directory of Open Access Journals (Sweden)

Alireza Moghaddasi

2016-10-01

Full Text Available Despite the various models and frameworks on electronic good governance are introduced, the multiple dimensions model of electronic good governance in the field of e-Learning has not been reviewed this subject in a integrated, comprehensive, process-oriented and systematic model. In this article, in order to explain the process of electronic good governance, by a systematic review of the related literature and backgrounds, all factors were identified using meta-synthesis methodology. Then, based on grounded theory methodology and Strauss and Corbin paradigmatic approach, the open, axial and selective coding were conducted. In the following, by using survey method, we determined the importance and priority of all proposed factors. It was also indicated that this research was innovative in the fields of methodology, results and the proposed model which had not been considered in the previous researches. So that, the proposed model resolved the shortcomings of past researches and made it possible for the public sector, private and civil society organizations to consider the process of establishing electronic good governance in e-Learning sector in Iran as a dynamic process.

Using Q Methodology in the Literature Review Process: A Mixed Research Approach

Science.gov (United States)

Onwuegbuzie, Anthony J.; Frels, Rebecca K.

2015-01-01

Because of the mixed research-based nature of literature reviews, it is surprising, then, that insufficient information has been provided as to how reviewers can incorporate mixed research approaches into their literature reviews. Thus, in this article, we provide a mixed methods research approach--Q methodology--for analyzing information…

Putting Foucault to work: an approach to the practical application of Foucault's methodological imperatives

Directory of Open Access Journals (Sweden)

DAVID A. NICHOLLS

2009-01-01

Full Text Available This paper presents an overview of the methodological approach taken in a recently completed Foucauldian discourse analysis of physiotherapy practice. In keeping with other approaches common to postmodern research this paper resists the temptation to define a proper or ‘correct’ interpretation of Foucault’s methodological oeuvre; preferring instead to apply a range of Foucauldian propositions to examples drawn directly from the thesis. In the paper I elucidate on the blended archaeological and genealogical approach I took and unpack some of the key imperatives, principles and rules I grappled with in completing the thesis.

Ionization Energies, Electron Affinities, and Polarization Energies of Organic Molecular Crystals: Quantitative Estimations from a Polarizable Continuum Model (PCM)–Tuned Range-Separated Density Functional Approach

KAUST Repository

Sun, Haitao

2016-05-16

We propose a new methodology for the first-principles description of the electronic properties relevant for charge transport in organic molecular crystals. This methodology, which is based on the combination of a non-empirical, optimally tuned range-separated hybrid functional with the polarizable continuum model, is applied to a series of eight representative molecular semiconductor crystals. We show that it provides ionization energies, electron affinities, and transport gaps in very good agreement with experimental values as well as with the results of many-body perturbation theory within the GW approximation at a fraction of the computational costs. Hence, this approach represents an easily applicable and computationally efficient tool to estimate the gas-to-crystal-phase shifts of the frontier-orbital quasiparticle energies in organic electronic materials.

Methodological approach to assessment of organizational resources of the productive activity

Directory of Open Access Journals (Sweden)

Alexander Miller

2017-05-01

Full Text Available The purpose of this article is to solve the problem connected with development of theoretical and methodological provisions of formation of the assessment procedure of organizational resources of the productive activity. Theoretical results of our research are: improvement of the concept of development of organizational resources of the productive activity; identifying the impact of organizational resources on the productive activity; justification of the basic principles of formation of the assessment system of efficiency of the organizational resources' use. We proposed a unified methodological approach allowing to combine the complexity of assessment of both quantity of core resources of the productive activity and organizational resources, which significantly develops traditional systems of the productive activity management based on identifying quantitative parameters of the subsystems, their assessment, comparison and analysis. We also substantiated our opinion on assessment of organizational resources' values. It is focused on the development of the productive activity and allows to use the developed tools of the methodological approach for forecast assessment of the impact of the quantity of core resources, used in the productive activity, and organizational resources of the productive activity on the economic results of the enterprise.

A linear algebraic approach to electron-molecule collisions

International Nuclear Information System (INIS)

Collins, L.A.; Schnieder, B.I.

1982-01-01

The linear algebraic approach to electron-molecule collisions is examined by firstly deriving the general set of coupled integrodifferential equations that describe electron collisional processes and then describing the linear algebraic approach for obtaining a solution to the coupled equations. Application of the linear algebraic method to static-exchange, separable exchange and effective optical potential, is examined. (U.K.)

A Local Approach Methodology for the Analysis of Ultimate Strength ...

African Journals Online (AJOL)

The local approach methodology in contrast to classical fracture mechanics can be used to predict the onset of tearing fracture, and the effects of geometry in tubular joints. Finite element analysis of T-joints plate geometries, and tubular joints has been done. The parameters of constraint, equivalent stress, plastic strain and ...

Quantifying biopsychosocial aspects in everyday contexts: an integrative methodological approach from the behavioral sciences

Science.gov (United States)

Portell, Mariona; Anguera, M Teresa; Hernández-Mendo, Antonio; Jonsson, Gudberg K

2015-01-01

Contextual factors are crucial for evaluative research in psychology, as they provide insights into what works, for whom, in what circumstances, in what respects, and why. Studying behavior in context, however, poses numerous methodological challenges. Although a comprehensive framework for classifying methods seeking to quantify biopsychosocial aspects in everyday contexts was recently proposed, this framework does not contemplate contributions from observational methodology. The aim of this paper is to justify and propose a more general framework that includes observational methodology approaches. Our analysis is rooted in two general concepts: ecological validity and methodological complementarity. We performed a narrative review of the literature on research methods and techniques for studying daily life and describe their shared properties and requirements (collection of data in real time, on repeated occasions, and in natural settings) and classification criteria (eg, variables of interest and level of participant involvement in the data collection process). We provide several examples that illustrate why, despite their higher costs, studies of behavior and experience in everyday contexts offer insights that complement findings provided by other methodological approaches. We urge that observational methodology be included in classifications of research methods and techniques for studying everyday behavior and advocate a renewed commitment to prioritizing ecological validity in behavioral research seeking to quantify biopsychosocial aspects. PMID:26089708

On Certain New Methodology for Reducing Sensor and Readout Electronics Circuitry Noise in Digital Domain

Science.gov (United States)

Kizhner, Semion; Miko, Joseph; Bradley, Damon; Heinzen, Katherine

2008-01-01

NASA Hubble Space Telescope (HST) and upcoming cosmology science missions carry instruments with multiple focal planes populated with many large sensor detector arrays. These sensors are passively cooled to low temperatures for low-level light (L3) and near-infrared (NIR) signal detection, and the sensor readout electronics circuitry must perform at extremely low noise levels to enable new required science measurements. Because we are at the technological edge of enhanced performance for sensors and readout electronics circuitry, as determined by thermal noise level at given temperature in analog domain, we must find new ways of further compensating for the noise in the signal digital domain. To facilitate this new approach, state-of-the-art sensors are augmented at their array hardware boundaries by non-illuminated reference pixels, which can be used to reduce noise attributed to sensors. There are a few proposed methodologies of processing in the digital domain the information carried by reference pixels, as employed by the Hubble Space Telescope and the James Webb Space Telescope Projects. These methods involve using spatial and temporal statistical parameters derived from boundary reference pixel information to enhance the active (non-reference) pixel signals. To make a step beyond this heritage methodology, we apply the NASA-developed technology known as the Hilbert- Huang Transform Data Processing System (HHT-DPS) for reference pixel information processing and its utilization in reconfigurable hardware on-board a spaceflight instrument or post-processing on the ground. The methodology examines signal processing for a 2-D domain, in which high-variance components of the thermal noise are carried by both active and reference pixels, similar to that in processing of low-voltage differential signals and subtraction of a single analog reference pixel from all active pixels on the sensor. Heritage methods using the aforementioned statistical parameters in the

Two-process approach to electron beam welding control

International Nuclear Information System (INIS)

Lastovirya, V.N.

1987-01-01

The analysis and synthesis of multi-dimensional welding control systems, which require the usage of computers, should be conducted within the temporal range. From the general control theory point two approaches - one-process and two-process - are possible to electron beam welding. In case of two-process approach, subprocesses of heat source formation and direct metal melting are separated. Two-process approach leads to two-profile control system and provides the complete controlability of electron beam welding within the frameworks of systems with concentrated, as well as, with distributed parameters. Approach choice for the given problem solution is determined, first of all, by stability degree of heat source during welding

Cost-effectiveness of greenhouse gas mitigation in transport: A review of methodological approaches and their impact

International Nuclear Information System (INIS)

Kok, Robert; Annema, Jan Anne; Wee, Bert van

2011-01-01

A review is given of methodological practices for ex ante cost-effectiveness analysis (CEA) of transport greenhouse gas (GHG) mitigation measures, e.g. fuel economy and CO 2 standards for road vehicles in the US and EU. Besides the fundamental differences between different types of policies and abatement options which inherently result in different CEA outcomes, differences in methodological choices and assumptions are another important source of variation in CEA outcomes. Fourteen methodological issues clustered into six groups are identified on which thirty-three selected studies are systematically reviewed. The potential variation between lower and upper cost-effectiveness estimates for GHG mitigation measures in transport, resulting from different methodological choices and assumptions, lies in the order of $400 per tonne CO 2 -eq. The practise of using CEA for policy-making could improve considerably by clearly indicating the specific purpose of the CEA and its strengths and limitations for policy decisions. Another improvement is related to the dominant approach in transport GHG mitigation studies: the bottom-up financial technical approach which assesses isolated effects, implying considerable limitations for policy-making. A shift to welfare-economic approaches using a hybrid model has the potential to establish an improved assessment of transport GHG mitigation measures based on realistic market responses and behavioural change. - Highlights: ► We identify fourteen important methodological issues clustered into six groups. ► We systematically review thirty-three selected transport GHG mitigation studies. ► Methodological choices can lead to a difference by up to $400 per tonne CO 2 -eq. ► The dominant bottom-up approach has limitations for policy-making. ► Welfare-economic approaches could improve cost-effectiveness analysis.

The evaluation of new methodological approaches to lease reporting on the side of lessor

Directory of Open Access Journals (Sweden)

Hana Bohušová

2013-01-01

Full Text Available Since 2002 the International Accounting Standards Board (IASB and the Financial Accounting Standards Board (FASB has begun significantly cooperate in the development of standards based on the same principles. The cooperation is realised through a series of short term or long term projects. Revenue recognition and lease reporting projects represent priority areas of convergence. The development of methodological approaches for lease reporting on the side of lessee and lessor that would eliminate the main weaknesses of the current system of reporting based on the classification of lease contracts in connection with the lease term and the transfer of risks and benefits associated with the lease to the lessee should be the result of the convergence activity in the area of lease reporting. The evaluation of the impact of the newly proposed methodological approaches to lease reporting in the field of operating leases into the financial statements of lessor that will be affected by this change of methodology (financial position, comprehensive income statement is the main aim of the paper. The impact into selected indicators of financial analysis with a focus on indicators, in whose construction are used items of statements that are significantly affected by the change of the methodological approach is evaluated as well.

Modeling a terminology-based electronic nursing record system: an object-oriented approach.

Science.gov (United States)

Park, Hyeoun-Ae; Cho, InSook; Byeun, NamSoo

2007-10-01

The aim of this study was to present our perspectives on healthcare information analysis at a conceptual level and the lessons learned from our experience with the development of a terminology-based enterprise electronic nursing record system - which was one of components in an EMR system at a tertiary teaching hospital in Korea - using an object-oriented system analysis and design concept. To ensure a systematic approach and effective collaboration, the department of nursing constituted a system modeling team comprising a project manager, systems analysts, user representatives, an object-oriented methodology expert, and healthcare informaticists (including the authors). A rational unified process (RUP) and the Unified Modeling Language were used as a development process and for modeling notation, respectively. From the scenario and RUP approach, user requirements were formulated into use case sets and the sequence of activities in the scenario was depicted in an activity diagram. The structure of the system was presented in a class diagram. This approach allowed us to identify clearly the structural and behavioral states and important factors of a terminology-based ENR system (e.g., business concerns and system design concerns) according to the viewpoints of both domain and technical experts.

The dynamic flowgraph methodology as a safety analysis tool : programmable electronic system design and verification

NARCIS (Netherlands)

Houtermans, M.J.M.; Apostolakis, G.E.; Brombacher, A.C.; Karydas, D.M.

2002-01-01

The objective of this paper is to demonstrate the use of the Dynamic Flowgraph Methodology (DFM) during the design and verification of programmable electronic safety-related systems. The safety system consists of hardware as well as software. This paper explains and demonstrates the use of DFM, and

ECSIN's methodological approach for hazard evaluation of engineered nanomaterials

Science.gov (United States)

Bregoli, Lisa; Benetti, Federico; Venturini, Marco; Sabbioni, Enrico

2013-04-01

The increasing production volumes and commercialization of engineered nanomaterials (ENM), together with data on their higher biological reactivity when compared to bulk counterpart and ability to cross biological barriers, have caused concerns about their potential impacts on the health and safety of both humans and the environment. A multidisciplinary component of the scientific community has been called to evaluate the real risks associated with the use of products containing ENM, and is today in the process of developing specific definitions and testing strategies for nanomaterials. At ECSIN we are developing an integrated multidisciplinary methodological approach for the evaluation of the biological effects of ENM on the environment and human health. While our testing strategy agrees with the most widely advanced line of work at the European level, the choice of methods and optimization of protocols is made with an extended treatment of details. Our attention to the methodological and technical details is based on the acknowledgment that the innovative characteristics of matter at the nano-size range may influence the existing testing methods in a partially unpredictable manner, an aspect which is frequently recognized at the discussion level but oftentimes disregarded at the laboratory bench level. This work outlines the most important steps of our testing approach. In particular, each step will be briefly discussed in terms of potential technical and methodological pitfalls that we have encountered, and which are often ignored in nanotoxicology research. The final aim is to draw attention to the need of preliminary studies in developing reliable tests, a crucial aspect to confirm the suitability of the chosen analytical and toxicological methods to be used for the specific tested nanoparticle, and to express the idea that in nanotoxicology,"devil is in the detail".

ECSIN's methodological approach for hazard evaluation of engineered nanomaterials

International Nuclear Information System (INIS)

Bregoli, Lisa; Benetti, Federico; Venturini, Marco; Sabbioni, Enrico

2013-01-01

The increasing production volumes and commercialization of engineered nanomaterials (ENM), together with data on their higher biological reactivity when compared to bulk counterpart and ability to cross biological barriers, have caused concerns about their potential impacts on the health and safety of both humans and the environment. A multidisciplinary component of the scientific community has been called to evaluate the real risks associated with the use of products containing ENM, and is today in the process of developing specific definitions and testing strategies for nanomaterials. At ECSIN we are developing an integrated multidisciplinary methodological approach for the evaluation of the biological effects of ENM on the environment and human health. While our testing strategy agrees with the most widely advanced line of work at the European level, the choice of methods and optimization of protocols is made with an extended treatment of details. Our attention to the methodological and technical details is based on the acknowledgment that the innovative characteristics of matter at the nano-size range may influence the existing testing methods in a partially unpredictable manner, an aspect which is frequently recognized at the discussion level but oftentimes disregarded at the laboratory bench level. This work outlines the most important steps of our testing approach. In particular, each step will be briefly discussed in terms of potential technical and methodological pitfalls that we have encountered, and which are often ignored in nanotoxicology research. The final aim is to draw attention to the need of preliminary studies in developing reliable tests, a crucial aspect to confirm the suitability of the chosen analytical and toxicological methods to be used for the specific tested nanoparticle, and to express the idea that in nanotoxicology,'devil is in the detail'.

Fundamental degradation mechanisms of layered oxide Li-ion battery cathode materials: Methodology, insights and novel approaches

International Nuclear Information System (INIS)

Hausbrand, R.; Cherkashinin, G.; Ehrenberg, H.; Gröting, M.; Albe, K.; Hess, C.; Jaegermann, W.

2015-01-01

Graphical abstract: - Highlights: • Description of recent in operando and in situ analysis methodology. • Surface science approach using photoemission for analysis of cathode surfaces and interfaces. • Ageing and fatigue of layered oxide Li-ion battery cathode materials from the atomistic point of view. • Defect formation and electronic structure evolution as causes for cathode degradation. • Significance of interfacial energy alignment and contact potential for side reactions. - Abstract: This overview addresses the atomistic aspects of degradation of layered LiMO 2 (M = Ni, Co, Mn) oxide Li-ion battery cathode materials, aiming to shed light on the fundamental degradation mechanisms especially inside active cathode materials and at their interfaces. It includes recent results obtained by novel in situ/in operando diffraction methods, modelling, and quasi in situ surface science analysis. Degradation of the active cathode material occurs upon overcharge, resulting from a positive potential shift of the anode. Oxygen loss and eventual phase transformation resulting in dead regions are ascribed to changes in electronic structure and defect formation. The anode potential shift results from loss of free lithium due to side reactions occurring at electrode/electrolyte interfaces. Such side reactions are caused by electron transfer, and depend on the electron energy level alignment at the interface. Side reactions at electrode/electrolyte interfaces and capacity fade may be overcome by the use of suitable solid-state electrolytes and Li-containing anodes

Mobile Usability Testing in Healthcare: Methodological Approaches.

Science.gov (United States)

Borycki, Elizabeth M; Monkman, Helen; Griffith, Janessa; Kushniruk, Andre W

2015-01-01

The use of mobile devices and healthcare applications is increasing exponentially worldwide. This has lead to the need for the healthcare industry to develop a better understanding of the impact of the usability of mobile software and hardware upon consumer and health professional adoption and use of these technologies. There are many methodological approaches that can be employed in conducting usability evaluation of mobile technologies. More obtrusive approaches to collecting study data may lead to changes in study participant behaviour, leading to study results that are less consistent with how the technologies will be used in the real-world. Alternatively, less obstrusive methods used in evaluating the usability of mobile software and hardware in-situ and laboratory settings can lead to less detailed information being collected about how an individual interacts with both the software and hardware. In this paper we review and discuss several innovative mobile usability evaluation methods on a contiuum from least to most obtrusive and their effects on the quality of the usability data collected. The strengths and limitations of methods are also discussed.

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-24

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

GENERIC APPROACH IN CHOICE OF ADEQUATE METHODOLOGY FOR THE ASSESSMENT OF IT INVESTMENTS

Directory of Open Access Journals (Sweden)

Melita Kozina

2012-07-01

Full Text Available Investments into information technology (IT, (hereinafter: IT investments havereached very high figures, which are still continually on the rise. IT potentials are being usedin an increasing number of ways. Various company managers have different approaches tothis issue. A large number of methods/models for the assessment of IT investments isavailable, so the question is posed of how to choose the adequate assessment category. Thesaid reasons have initiated a need for defining the generic approach in the choice ofadequate methodology for the assessment of IT investments, which was indeed the goal ofthis paper. General ideas to this approach stem from the fact that each IT investment has itspurpose and belongs to a certain type of IT investment (decision-making aspect whichdemands its relevant methodology for assessing IT investments. Two groups of demands(conditions have been defined in choosing relevant methodology. The first group pertains tomethodology analysis and determination of its compatibility with characteristics of thedefined decision-making aspect. The second group of conditions pertains to methodologyanalysis with respect to its possibilities (abilities of integrating quantity, quality and riskfactors of IT decision. Conducted field research shows that the assessment of IT investmentshas been done mainly using simpler methods/models and their combinations, and is focusedon quantity aspects of IT values.

Effective approaches for managing electronic records and archives

CERN Document Server

Dearstyne, Bruce W

2006-01-01

This is a book of fresh insights, perspectives, strategies, and approaches for managing electronic records and archives. The authors draw on first-hand experience to present practical solutions, including recommendations for building and sustaining strong electronic records programs.

Electronic structure of PPP@ZnO from all-electron quasiarticle calculations

Science.gov (United States)

Höffling, Benjamin; Nabok, Dimitri; Draxl, Claudia; Condensed Matter Theory Group, Humboldt University Berlin Team

We investigate the electronic properties of poly(para-phenylene) (PPP) adsorbed on the non-polar (001) surface of rocksalt (rs) ZnO using all-electron density functional theory (DFT) as well as quasiparticle (QP) calculations within the GW approach. A particular focus is put on the electronic band discontinuities at the interface, where we investigate the impact of quantum confinement, molecular polarization, and charge rearrangement. For our prototypical system, PPP@ZnO, we find a type-I heterostructure. Comparison of the band offsets derived from a QP-treatment of the hybrid system with predictions based on mesoscopic methods, like the Shockley-Anderson model or alignment via the electrostatic potential, reveals the inadequacy of these simple approaches for the prediction of the electronic structure of such inorganic/organic heterosystems. Finally, we explore the optical excitations of the interface compared to the features of the pristine components and discuss the methodological implications for the ab-initio treatment of interface electronics.

Characterising influences on safety culture in military aviation:a methodologically grounded approach

OpenAIRE

Bennett, Anthea; Hellier, Elizabeth; Weyman, Andrew

2015-01-01

Historically, much effort has been expended in safety culture / climate research toward identifying a generic core set of components, predominately using the self-administered questionnaire approach. However, no stable unified model has emerged, and much of this research has taken a methodologically top-down approach to depicting organisational safety culture. In light of this, the benefits of qualitative exploration as a precursor to and foundation for the development of quantitative climate...

Two-particle approach to the electronic structure of solids

International Nuclear Information System (INIS)

Gonis, A.

2007-01-01

Based on an extension of Hubbard's treatment of the electronic structure of correlated electrons in matter we propose a methodology that incorporates the scattering off the Coulomb interaction through the determination of a two-particle propagator. The Green function equations of motion are then used to obtain single-particle Green functions and related properties such as densities of states. The solutions of the equations of motion in two- and single-particle spaces are accomplished through applications of the coherent potential approximation. The formalism is illustrated by means of calculations for a single-band model system representing a linear arrangement of sites with nearest neighbor hopping and an one-site repulsion when two electrons of opposite spin occupy the same site in the lattice in the manner described by the so-called Hubbard Hamiltonian

Methodological approaches to assessing of country’s financial capacity

Directory of Open Access Journals (Sweden)

A.Yu. Polchanov

2017-12-01

Full Text Available This research is devoted to the theoretical basis of country’s financial capacity assessment, its specificities and algorithm. The aim of the investigation is the generalization of methodological approaches to evaluating country’s financial capacity. The author determines that the assessment involves preparatory, analytical, and final stages. The special attention is paid to the information based on the analysis, demands on it, impact of changes in methodology, dynamics of macroeconomic indicators. The establishment of the united analytical center for assessment of financial capacity of the state for post-conflict recovery is proposed. The results of the critical review of the publications in this field have helped to improve the classification of country’s financial capacity assessment methods by providing some new attributes such as the focus of the evaluation and type of intelligence. The problem of using unlicensed software to assess the financial capacity of the state and the associated risk have not been left without attention.

The teacher's role in selecting a methodological approach to the interpretation of a literary work

Directory of Open Access Journals (Sweden)

Stakić Mirjana M.

2016-01-01

Full Text Available The paper looks at the teacher's role in selecting a methodological approach to the interpretation of a literary work. The choice of methodological approach is dependent on: 1 the semiotic structure of the literary text; 2 the specific educational goals of interpretation; 3 the students' age, psychophysical abilities and knowledge, and 4 the planned circumstances of instruction. In selecting a method of interpretation, the teacher should take into consideration not only these factors, but also contemporary literary theory and its methodological apparatus. This can be a challenging task whose fulfillment does not guarantee that the interpretation will be successful, since the validity and functionality of the methodological approach cannot be established in theory but rather through teaching practice. It is up to the teacher to be creative, because a literary work cannot be interpreted by means of a single method but always through a combination of methods, certain of which have their origins in literary theory. There is a widespread belief among teachers that these methods, which have the status of technical/special methods in literary methodology, cannot be used in the first four grades of elementary school. This paper offers an example illustrating that the interpretive model can be used as early as first grade. A teacher's knowledge, as well as their creativity in selecting a method and their openness to creative methodological combinations and skill in applying them, directly affect the effectiveness of interpretation, either succeeding in developing a fondness for books and reading, or, failing that, resulting in a permanent loss of interest in the world of literature.

Loop-driven graphical unitary group approach to the electron correlation problem, including configuration interaction energy gradients

International Nuclear Information System (INIS)

Brooks, B.R.

1979-09-01

The Graphical Unitary Group Approach (GUGA) was cast into an extraordinarily powerful form by restructuring the Hamiltonian in terms of loop types. This restructuring allows the adoption of the loop-driven formulation which illuminates vast numbers of previously unappreciated relationships between otherwise distinct Hamiltonian matrix elements. The theoretical/methodological contributions made here include the development of the loop-driven formula generation algorithm, a solution of the upper walk problem used to develop a loop breakdown algorithm, the restriction of configuration space employed to the multireference interacting space, and the restructuring of the Hamiltonian in terms of loop types. Several other developments are presented and discussed. Among these developments are the use of new segment coefficients, improvements in the loop-driven algorithm, implicit generation of loops wholly within the external space adapted within the framework of the loop-driven methodology, and comparisons of the diagonalization tape method to the direct method. It is also shown how it is possible to implement the GUGA method without the time-consuming full (m 5 ) four-index transformation. A particularly promising new direction presented here involves the use of the GUGA methodology to obtain one-electron and two-electron density matrices. Once these are known, analytical gradients (first derivatives) of the CI potential energy are easily obtained. Several test calculations are examined in detail to illustrate the unique features of the method. Also included is a calculation on the asymmetric 2 1 A' state of SO 2 with 23,613 configurations to demonstrate methods for the diagonalization of very large matrices on a minicomputer. 6 figures, 6 tables

A new methodological approach for PET implementation in radiotherapy treatment planning.

Science.gov (United States)

Bellan, Elena; Ferretti, Alice; Capirci, Carlo; Grassetto, Gaia; Gava, Marcello; Chondrogiannis, Sotirios; Virdis, Graziella; Marzola, Maria Cristina; Massaro, Arianna; Rubello, Domenico; Nibale, Otello

2012-05-01

In this paper, a new methodological approach to using PET information in radiotherapy treatment planning has been discussed. Computed tomography (CT) represents the primary modality to plan personalized radiation treatment, because it provides the basic electron density map for correct dose calculation. If PET scanning is also performed it is typically coregistered with the CT study. This operation can be executed automatically by a hybrid PET/CT scanner or, if the PET and CT imaging sets have been acquired through different equipment, by a dedicated module of the radiotherapy treatment planning system. Both approaches have some disadvantages: in the first case, the bore of a PET/CT system generally used in clinical practice often does not allow the use of certain bulky devices for patient immobilization in radiotherapy, whereas in the second case the result could be affected by limitations in window/level visualization of two different image modalities, and the displayed PET volumes can appear not to be related to the actual uptake into the patient. To overcome these problems, at our centre a specific procedure has been studied and tested in 30 patients, allowing good results of precision in the target contouring to be obtained. The process consists of segmentation of the biological target volume by a dedicated PET/CT console and its export to a dedicated radiotherapy system, where an image registration between the CT images acquired by the PET/CT scanner and a large-bore CT is performed. The planning target volume is contoured only on the large-bore CT and is used for virtual simulation, to individuate permanent skin markers on the patient.

Air pollution monitoring - a methodological approach

International Nuclear Information System (INIS)

Trajkovska Trpevska, Magdalena

2002-01-01

Methodology for monitoring the emission of polluters in the air is a complex concept that in general embraces following fazes: sampling, laboratory treatment, and interpretation of results. In Company for technological and laboratory investigation and environmental protection - Mining Institute Skopje, the control of emission of polluters in the air is performing according methodology based in general on the recommendation of standard VDI 2.066 prescribe from Ministry of Ecology in Germany, because adequate legislation in our country does not exist. In this article the basic treatment of methodology for the air polluters emission control is presented. (Original)

A Methodological Approach to Support Collaborative Media Creation in an E-Learning Higher Education Context

Science.gov (United States)

Ornellas, Adriana; Muñoz Carril, Pablo César

2014-01-01

This article outlines a methodological approach to the creation, production and dissemination of online collaborative audio-visual projects, using new social learning technologies and open-source video tools, which can be applied to any e-learning environment in higher education. The methodology was developed and used to design a course in the…

Electron momentum density and Compton profile by a semi-empirical approach

Science.gov (United States)

Aguiar, Julio C.; Mitnik, Darío; Di Rocco, Héctor O.

2015-08-01

Here we propose a semi-empirical approach to describe with good accuracy the electron momentum densities and Compton profiles for a wide range of pure crystalline metals. In the present approach, we use an experimental Compton profile to fit an analytical expression for the momentum densities of the valence electrons. This expression is similar to a Fermi-Dirac distribution function with two parameters, one of which coincides with the ground state kinetic energy of the free-electron gas and the other resembles the electron-electron interaction energy. In the proposed scheme conduction electrons are neither completely free nor completely bound to the atomic nucleus. This procedure allows us to include correlation effects. We tested the approach for all metals with Z=3-50 and showed the results for three representative elements: Li, Be and Al from high-resolution experiments.

NASA and COTS Electronics: Past Approach and Successes - Future Considerations

Science.gov (United States)

LaBel, Kenneth A.

2018-01-01

NASA has a long history of using commercial grade electronics in space. In this talk, a brief history of NASAâ's trends and approaches to commercial grade electronics focusing on processing and memory systems will be presented. This will include providing summary information on the space hazards to electronics as well as NASA mission trade space. We will also discuss developing recommendations for risk management approaches to Electrical, Electronic and Electromechanical (EEE) parts and reliability in space. The final portion of the talk will discuss emerging aerospace trends and the future for Commercial Off The Shelf (COTS) usage.

Multicriteria methodological approach to manage urban air pollution

Science.gov (United States)

Vlachokostas, Ch.; Achillas, Ch.; Moussiopoulos, N.; Banias, G.

2011-08-01

Managing urban air pollution necessitates a feasible and efficient abatement strategy which is characterised as a defined set of specific control measures. In practice, hard budget constraints are present in any decision-making process and therefore available alternatives need to be hierarchised in a fast but still reliable manner. Moreover, realistic strategies require adequate information on the available control measures, taking also into account the area's special characteristics. The selection of the most applicable bundle of measures rests in achieving stakeholders' consensus, while taking into consideration mutually conflicting views and criteria. A preliminary qualitative comparison of alternative control measures would be most handy for decision-makers, forming the grounds for an in-depth analysis of the most promising ones. This paper presents an easy-to-follow multicriteria methodological approach in order to include and synthesise multi-disciplinary knowledge from various stakeholders so as to result into a priority list of abatement options, achieve consensus and secure the adoption of the resulting optimal solution. The approach relies on the active involvement of public authorities and local stakeholders in order to incorporate their environmental, economic and social preferences. The methodological scheme is implemented for the case of Thessaloniki, Greece, an area considered among the most polluted cities within Europe, especially with respect to airborne particles. Intense police control, natural gas penetration in buildings and metro construction equally result into the most "promising" alternatives in order to control air pollution in the GTA. The three optimal alternatives belong to different thematic areas, namely road transport, thermal heating and infrastructure. Thus, it is obvious that efforts should spread throughout all thematic areas. Natural gas penetration in industrial units, intense monitoring of environmental standards and regular

Soviet-designed pressurized water reactor symptomatic emergency operating instruction analytical procedure: approach, methodology, development and application

International Nuclear Information System (INIS)

Beelman, R.J.

1999-01-01

A symptom approach to the analytical validation of symptom-based EOPs includes: (1) Identification of critical safety functions to the maintenance of fission product barrier integrity; (2) Identification of the symptoms which manifest an impending challenge to critical safety function maintenance; (3) Development of a symptomatic methodology to delineate bounding plant transient response modes; (4) Specification of bounding scenarios; (5) Development of a systematic calculational approach consistent with the objectives of the methodology; (6) Performance of thermal-hydraulic computer code calculations implementing the analytical methodology; (7) Interpretation of the analytical results on the basis of information available to the operator; (8) Application of the results to the validation of the proposed operator actions; (9) Production of a technical basis document justifying the proposed operator actions. (author)

Hydrodynamic approach to electronic transport in graphene

Energy Technology Data Exchange (ETDEWEB)

Narozhny, Boris N. [Institute for Theoretical Condensed Matter Physics, Karlsruhe Institute of Technology, Karlsruhe (Germany); National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow (Russian Federation); Gornyi, Igor V. [Institute for Theoretical Condensed Matter Physics, Karlsruhe Institute of Technology, Karlsruhe (Germany); Institute of Nanotechnology, Karlsruhe Institute of Technology, Karlsruhe (Germany); Ioffe Physical Technical Institute, St. Petersburg (Russian Federation); Mirlin, Alexander D. [Institute for Theoretical Condensed Matter Physics, Karlsruhe Institute of Technology, Karlsruhe (Germany); Institute of Nanotechnology, Karlsruhe Institute of Technology, Karlsruhe (Germany); Petersburg Nuclear Physics Institute, St. Petersburg (Russian Federation); Schmalian, Joerg [Institute for Theoretical Condensed Matter Physics, Karlsruhe Institute of Technology, Karlsruhe (Germany); Institute for Solid State Physics, Karlsruhe Institute of Technology, Karlsruhe (Germany)

2017-11-15

The last few years have seen an explosion of interest in hydrodynamic effects in interacting electron systems in ultra-pure materials. In this paper we briefly review the recent advances, both theoretical and experimental, in the hydrodynamic approach to electronic transport in graphene, focusing on viscous phenomena, Coulomb drag, non-local transport measurements, and possibilities for observing nonlinear effects. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

[Systemic inflammation: theoretical and methodological approaches to description of general pathological process model. Part 3. Backgroung for nonsyndromic approach].

Science.gov (United States)

Gusev, E Yu; Chereshnev, V A

2013-01-01

Theoretical and methodological approaches to description of systemic inflammation as general pathological process are discussed. It is shown, that there is a need of integration of wide range of types of researches to develop a model of systemic inflammation.

Complex basis functions for molecular resonances: Methodology and applications

Science.gov (United States)

White, Alec; McCurdy, C. William; Head-Gordon, Martin

The computation of positions and widths of metastable electronic states is a challenge for molecular electronic structure theory because, in addition to the difficulty of the many-body problem, such states obey scattering boundary conditions. These resonances cannot be addressed with naïve application of traditional bound state electronic structure theory. Non-Hermitian electronic structure methods employing complex basis functions is one way that we may rigorously treat resonances within the framework of traditional electronic structure theory. In this talk, I will discuss our recent work in this area including the methodological extension from single determinant SCF-based approaches to highly correlated levels of wavefunction-based theory such as equation of motion coupled cluster and many-body perturbation theory. These approaches provide a hierarchy of theoretical methods for the computation of positions and widths of molecular resonances. Within this framework, we may also examine properties of resonances including the dependence of these parameters on molecular geometry. Some applications of these methods to temporary anions and dianions will also be discussed.

Teaching Behavioral Modeling and Simulation Techniques for Power Electronics Courses

Science.gov (United States)

Abramovitz, A.

2011-01-01

This paper suggests a pedagogical approach to teaching the subject of behavioral modeling of switch-mode power electronics systems through simulation by general-purpose electronic circuit simulators. The methodology is oriented toward electrical engineering (EE) students at the undergraduate level, enrolled in courses such as "Power…

A methodology for the extraction of quantitative information from electron microscopy images at the atomic level

International Nuclear Information System (INIS)

Galindo, P L; Pizarro, J; Guerrero, E; Guerrero-Lebrero, M P; Scavello, G; Yáñez, A; Sales, D L; Herrera, M; Molina, S I; Núñez-Moraleda, B M; Maestre, J M

2014-01-01

In this paper we describe a methodology developed at the University of Cadiz (Spain) in the past few years for the extraction of quantitative information from electron microscopy images at the atomic level. This work is based on a coordinated and synergic activity of several research groups that have been working together over the last decade in two different and complementary fields: Materials Science and Computer Science. The aim of our joint research has been to develop innovative high-performance computing techniques and simulation methods in order to address computationally challenging problems in the analysis, modelling and simulation of materials at the atomic scale, providing significant advances with respect to existing techniques. The methodology involves several fundamental areas of research including the analysis of high resolution electron microscopy images, materials modelling, image simulation and 3D reconstruction using quantitative information from experimental images. These techniques for the analysis, modelling and simulation allow optimizing the control and functionality of devices developed using materials under study, and have been tested using data obtained from experimental samples

The "Critical" Elements of Illness Management and Recovery: Comparing Methodological Approaches.

Science.gov (United States)

McGuire, Alan B; Luther, Lauren; White, Dominique; White, Laura M; McGrew, John; Salyers, Michelle P

2016-01-01

This study examined three methodological approaches to defining the critical elements of Illness Management and Recovery (IMR), a curriculum-based approach to recovery. Sixty-seven IMR experts rated the criticality of 16 IMR elements on three dimensions: defining, essential, and impactful. Three elements (Recovery Orientation, Goal Setting and Follow-up, and IMR Curriculum) met all criteria for essential and defining and all but the most stringent criteria for impactful. Practitioners should consider competence in these areas as preeminent. The remaining 13 elements met varying criteria for essential and impactful. Findings suggest that criticality is a multifaceted construct, necessitating judgments about model elements across different criticality dimensions.

A multi-frequency approach to free electron lasers driven by short electron bunches

International Nuclear Information System (INIS)

Piovella, Nicola

1997-01-01

A multi-frequency model for free electron lasers (FELs), based on the Fourier decomposition of the radiation field coupled with the beam electrons, is discussed. We show that the multi-frequency approach allows for an accurate description of the evolution of the radiation spectrum, also when the FEL is driven by short electron bunches, of arbitrary longitudinal profile. We derive from the multi-frequency model, by averaging over one radiation period, the usual FEL equations modelling the slippage between radiation and particles and describing the super-radiant regime in high-gain FELs. As an example of application of the multi-frequency model, we discuss the coherent spontaneous emission (CSE) from short electron bunches

Project INTEGRATE - a common methodological approach to understand integrated health care in Europe

Directory of Open Access Journals (Sweden)

Lucinda Cash-Gibson

2014-12-01

Full Text Available Background: The use of case studies in health services research has proven to be an excellent methodology for gaining in-depth understanding of the organisation and delivery of health care. This is particularly relevant when looking at the complexity of integrated healthcare programmes, where multifaceted interactions occur at the different levels of care and often without a clear link between the interventions (new and/or existing and their impact on outcomes (in terms of patients health, both patient and professional satisfaction and cost-effectiveness. Still, integrated care is seen as a core strategy in the sustainability of health and care provision in most societies in Europe and beyond. More specifically, at present, there is neither clear evidence on transferable factors of integrated care success nor a method for determining how to establish these specific success factors. The drawback of case methodology in this case, however, is that the in-depth results or lessons generated are usually highly context-specific and thus brings the challenge of transferability of findings to other settings, as different health care systems and different indications are often not comparable. Project INTEGRATE, a European Commission-funded project, has been designed to overcome these problems; it looks into four chronic conditions in different European settings, under a common methodology framework (taking a mixed-methods approach to try to overcome the issue of context specificity and limited transferability. The common methodological framework described in this paper seeks to bring together the different case study findings in a way that key lessons may be derived and transferred between countries, contexts and patient-groups, where integrated care is delivered in order to provide insight into generalisability and build on existing evidence in this field.Methodology: To compare the different integrated care experiences, a mixed-methods approach has

Analysis of market competitive structure: The new methodological approach based in the using

International Nuclear Information System (INIS)

Romero de la Fuente, J.; Yague Guillen, M. J.

2007-01-01

This paper proposes a new methodological approach to identify market competitive structure, applying usage situation concept in positioning analysis. Dimensions used by consumer to classify products are identified using Correspondence Analysis and competitive groups are formed. Results are validated with Discriminant Analysis. (Author) 23 refs

A methodological approach to the materiality of clothing: Wardrobe studies

OpenAIRE

Klepp, Ingun Grimstad; Mari, Bjerck

2012-01-01

The material is not just ‘a carrier’ of different types of symbols, but an active element in the practices. Bringing this to the fore requires new research methods. This article discusses a methodological approach, we call it a wardrobe study, which allows for the analysis of the way in which clothes relate to each other on the whole or within parts of the wardrobe. More specifically, we discuss how this method can contribute to increasing the materiality of clothes studies. The theoretical p...

Methodological Demonstration of a Text Analytics Approach to Country Logistics System Assessments

DEFF Research Database (Denmark)

Kinra, Aseem; Mukkamala, Raghava Rao; Vatrapu, Ravi

2017-01-01

The purpose of this study is to develop and demonstrate a semi-automated text analytics approach for the identification and categorization of information that can be used for country logistics assessments. In this paper, we develop the methodology on a set of documents for 21 countries using...... and the text analyst. Implications are discussed and future work is outlined....

Sample Preparation Methodologies for In Situ Liquid and Gaseous Cell Analytical Transmission Electron Microscopy of Electropolished Specimens.

Science.gov (United States)

Zhong, Xiang Li; Schilling, Sibylle; Zaluzec, Nestor J; Burke, M Grace

2016-12-01

In recent years, an increasing number of studies utilizing in situ liquid and/or gaseous cell scanning/transmission electron microscopy (S/TEM) have been reported. Because of the difficulty in the preparation of suitable specimens, these environmental S/TEM studies have been generally limited to studies of nanoscale structured materials such as nanoparticles, nanowires, or sputtered thin films. In this paper, we present two methodologies which have been developed to facilitate the preparation of electron-transparent samples from conventional bulk metals and alloys for in situ liquid/gaseous cell S/TEM experiments. These methods take advantage of combining sequential electrochemical jet polishing followed by focused ion beam extraction techniques to create large electron-transparent areas for site-specific observation. As an example, we illustrate the application of this methodology for the preparation of in situ specimens from a cold-rolled Type 304 austenitic stainless steel sample, which was subsequently examined in both 1 atm of air as well as fully immersed in a H2O environment in the S/TEM followed by hyperspectral imaging. These preparation techniques can be successfully applied as a general procedure for a wide range of metals and alloys, and are suitable for a variety of in situ analytical S/TEM studies in both aqueous and gaseous environments.

Surface electronic transport measurements: A micro multi-point probe approach

DEFF Research Database (Denmark)

Barreto, Lucas

2014-01-01

This work is mostly focused on the study of electronic transport properties of two-dimensional materials, in particular graphene and topological insulators. To study these, we have improved a unique micro multi-point probe instrument used to perform transport measurements. Not only the experimental...... quantities are extracted, such as conductivity, carrier density and carrier mobility. • A method to insulate electrically epitaxial graphene grown on metals, based on a stepwise intercalation methodology, is developed and transport measurements are performed in order to test the insulation. • We show...... a direct measurement of the surface electronic transport on a bulk topological insulator. The surface state conductivity and mobility are obtained. Apart from transport properties, we also investigate the atomic structure of the Bi2Se3(111) surface via surface x-ray diraction and low-energy electron...

New methodological perspectives in pedagogical approach to teaching and learning processes in school education

Directory of Open Access Journals (Sweden)

Lorena Pérez Piña

2016-03-01

Full Text Available For years, the methodology has been worked from a focus on teaching styles and pedagogy situations approach, which was a breakthrough, but the needs of individualization were drifting towards new methodological perspectives and teaching, being cooperative games, the willing environments, or communication processes (López, 2012, who were showing a new way to understand the methodology and teaching styles in Education, and it was not to focus on a way to understand these issues from the point of view of the teacher, but how attending to the cognitive and learning processes of students, we could better optimize our intervention.Actually, we have analyzed the latest publications in the last three years, around methodology and teaching styles, using various databases. The results of this search have been quite limited, which may make us think that they have not really relevant changes in the design of such education.

IoT-Based Information System for Healthcare Application: Design Methodology Approach

Directory of Open Access Journals (Sweden)

Damian Dziak

2017-06-01

Full Text Available Over the last few decades, life expectancy has increased significantly. However, elderly people who live on their own often need assistance due to mobility difficulties, symptoms of dementia or other health problems. In such cases, an autonomous supporting system may be helpful. This paper proposes the Internet of Things (IoT-based information system for indoor and outdoor use. Since the conducted survey of related works indicated a lack of methodological approaches to the design process, therefore a Design Methodology (DM, which approaches the design target from the perspective of the stakeholders, contracting authorities and potential users, is introduced. The implemented solution applies the three-axial accelerometer and magnetometer, Pedestrian Dead Reckoning (PDR, thresholding and the decision trees algorithm. Such an architecture enables the localization of a monitored person within four room-zones with accuracy; furthermore, it identifies falls and the activities of lying, standing, sitting and walking. Based on the identified activities, the system classifies current activities as normal, suspicious or dangerous, which is used to notify the healthcare staff about possible problems. The real-life scenarios validated the high robustness of the proposed solution. Moreover, the test results satisfied both stakeholders and future users and ensured further cooperation with the project.

Developing a methodology to assess the impact of research grant funding: a mixed methods approach.

Science.gov (United States)

Bloch, Carter; Sørensen, Mads P; Graversen, Ebbe K; Schneider, Jesper W; Schmidt, Evanthia Kalpazidou; Aagaard, Kaare; Mejlgaard, Niels

2014-04-01

This paper discusses the development of a mixed methods approach to analyse research funding. Research policy has taken on an increasingly prominent role in the broader political scene, where research is seen as a critical factor in maintaining and improving growth, welfare and international competitiveness. This has motivated growing emphasis on the impacts of science funding, and how funding can best be designed to promote socio-economic progress. Meeting these demands for impact assessment involves a number of complex issues that are difficult to fully address in a single study or in the design of a single methodology. However, they point to some general principles that can be explored in methodological design. We draw on a recent evaluation of the impacts of research grant funding, discussing both key issues in developing a methodology for the analysis and subsequent results. The case of research grant funding, involving a complex mix of direct and intermediate effects that contribute to the overall impact of funding on research performance, illustrates the value of a mixed methods approach to provide a more robust and complete analysis of policy impacts. Reflections on the strengths and weaknesses of the methodology are used to examine refinements for future work. Copyright © 2014 Elsevier Ltd. All rights reserved.

Transients of modern power electronics

CERN Document Server

Bai, Hua

2011-01-01

In high power, high voltage electronics systems, a strategy to manage short timescale energy imbalances is fundamental to the system reliability. Without a theoretical framework, harmful local convergence of energy can affect the dynamic process of transformation, transmission, and storage which create an unreliable system. With an original approach that encourages understanding of both macroscopic and microscopic factors, the authors offer a solution. They demonstrate the essential theory and methodology for the design, modeling and prototyping of modern power electronics converters to crea

Heating electrons with ion irradiation: A first-principles approach

International Nuclear Information System (INIS)

Pruneda, J.M.; Sanchez-Portal, D.; Arnau, A.; Juaristi, J.I.; Artacho, E.

2009-01-01

Using time-dependent density functional theory we calculate from first-principles the rate of energy transfer from a moving charged particle to the electrons in an insulating material. The behavior of the electronic stopping power in LiF (a wide band gap insulator) versus projectile velocity displays an effective threshold velocity of 8.2 Bohr/asec for the proton, consistent with recent experimental observations. The calculated proton/antiproton stopping power ratio is 2.4 at velocities slightly above the threshold (16.5 Bohr/asec) as compared to the experimental value of 2.1. The approximations introduced in this new non-perturbative methodology are discussed, and results on the velocity dependence of the stopping power, the locality of the energy transfer, and other characteristics of the host material are presented.

MEDIATIC NARRATIVES AND IDENTIFICATION PROCESSES. A THEORETICAL AND METHODOLOGICAL APPROACH

Directory of Open Access Journals (Sweden)

Salomé Sola Morales

2013-04-01

Full Text Available This article, theoretical and argumentative, lays the conceptual and methodological basis for the study of the link between identity and narrative media identification processes undertaken by individuals and groups. Thus, the setting national identifications, professional, religious or gender is here proposed as the result of the dialectic between the 'media narrative identity', which the media produce and convey, and identification processes that individuals and groups perform. Furthermore we propose the use of the biographical method as a form of empirical approach to psycho-social phenomenon

[An approach to a methodology of scientific research for assistant-students].

Science.gov (United States)

Novak, Ivón T C; Bejarano, Paola Antón; Rodríguez, Fernando Marcos

2007-01-01

This work is presented from a "problematic" perspective in the attempt to establish a dialogic relationship between the educator and the student-subject, mediated by the object of knowledge. It is oriented to the integral education of the helping students departing from a closer approach to the scientific research. This work was carried out by a teacher and two hired students. This project was developed in relation with the profile required for the career of medicine in the Faculty of Medicine of the National University of Cordoba which--among other aspects- addresses the importance of "adopting a positive attitude towards research based on knowledge and the application of the scientific methodology" and towards "the development of a responsible self-learning and continuous improvements" (sic). Thus, this work tries to be aligned with this perspectives. I. Characterization of the scientific methodology. Search for bibliography and discussion of scientific works. II. Optimization of the methodology for the observation of leucocytes: blood samples donated by healthy people, non-coagulating with citrate or with EDTA (Blood reservoir of the UNC (National University of Cordoba) n = 20. a) Blood smear of full blood. b) centrifugation at 200g of plasma and aspirated leucocytes after erythro sedimentation and re suspension of the cell pellet and cyto-dispersion. Cytological and cyto-chemical techniques. I. Deeper knowledge about blood field was achieved. It generated an appropriate atmosphere to produce scientific questioning and the activities involved in the process were carried out responsibly. II. Better results were achieved using EDTA for the observation and analysis of leucocytes. It was possible to attain the objectives for an approach to a scientific research as well as for a contribution towards a responsible development in the continuous learning process.

Library training to promote electronic resource usage

DEFF Research Database (Denmark)

Frandsen, Tove Faber; Tibyampansha, Dativa; Ibrahim, Glory

2017-01-01

Purpose: Increasing the usage of electronic resources is an issue of concern for many libraries all over the world. Several studies stress the importance of information literacy and instruction in order to increase the usage. Design/methodology/approach: The present article presents the results...

An alternative approach in operator allocation labor intensive manufacturing system: A three-phase methodology framework

Science.gov (United States)

Mat Rani, Ruzanita; Ismail, Wan Rosmanira

2013-04-01

Operator allocation is one of the most important decisions that can affect productivity in labor-intensive manufacturing system. Improper decision on operator allocation will reduce company's throughput and increase waste. Therefore, all factors such as operators' performance and operational constraints need to be considered in making the best operator allocation decision. Most of previous studies used two phases methodology. In two phases methodology, they used operational constraints and treated all operators to have the same level of performance for making decision on operator allocation. Therefore, in this paper a three-phase methodology is proposed to determine the optimal operator allocation. This methodology advances the existing approach on operator allocation by combining operators' performance and operational constraints. The methodology starts with evaluating the operators' performance. Then, it is followed with determining inputs and outputs for operator allocation alternatives and it ends with determining the optimal operator allocation. This paper will give ideas and directions to the management of the manufacturing company in determining the optimal operator allocation decision.

Improving the Assessment of Pediatric Chronic Pain: Harnessing the Potential of Electronic Diaries

Directory of Open Access Journals (Sweden)

Jennifer N Stinson

2009-01-01

Full Text Available Current methods for evaluating chronic pain in children suffer from methodological problems. Real-time data capture approaches using electronic diaries have been proposed as a new standard for pain measurement. However, there is limited information available regarding the development, feasibility and validity of these approaches in children. The present paper reviews problems with current measures; rationale for developing real-time data capture approaches using electronic diaries; mechanics of developing electronic pain diaries; current evidence regarding their usability, feasibility and validity; and discusses future directions for research in this area.

Methodological Approach to Company Cash Flows Target-Oriented Forecasting Based on Financial Position Analysis

OpenAIRE

Sergey Krylov

2012-01-01

The article treats a new methodological approach to the company cash flows target-oriented forecasting based on its financial position analysis. The approach is featured to be universal and presumes application of the following techniques developed by the author: financial ratio values correction techniques and correcting cash flows techniques. The financial ratio values correction technique assumes to analyze and forecast company financial position while the correcting cash flows technique i...

Integrated Nationwide Electronic Health Records system: Semi-distributed architecture approach.

Science.gov (United States)

Fragidis, Leonidas L; Chatzoglou, Prodromos D; Aggelidis, Vassilios P

2016-11-14

The integration of heterogeneous electronic health records systems by building an interoperable nationwide electronic health record system provides undisputable benefits in health care, like superior health information quality, medical errors prevention and cost saving. This paper proposes a semi-distributed system architecture approach for an integrated national electronic health record system incorporating the advantages of the two dominant approaches, the centralized architecture and the distributed architecture. The high level design of the main elements for the proposed architecture is provided along with diagrams of execution and operation and data synchronization architecture for the proposed solution. The proposed approach effectively handles issues related to redundancy, consistency, security, privacy, availability, load balancing, maintainability, complexity and interoperability of citizen's health data. The proposed semi-distributed architecture offers a robust interoperability framework without healthcare providers to change their local EHR systems. It is a pragmatic approach taking into account the characteristics of the Greek national healthcare system along with the national public administration data communication network infrastructure, for achieving EHR integration with acceptable implementation cost.

Grid-based electronic structure calculations: The tensor decomposition approach

Energy Technology Data Exchange (ETDEWEB)

Rakhuba, M.V., E-mail: rakhuba.m@gmail.com [Skolkovo Institute of Science and Technology, Novaya St. 100, 143025 Skolkovo, Moscow Region (Russian Federation); Oseledets, I.V., E-mail: i.oseledets@skoltech.ru [Skolkovo Institute of Science and Technology, Novaya St. 100, 143025 Skolkovo, Moscow Region (Russian Federation); Institute of Numerical Mathematics, Russian Academy of Sciences, Gubkina St. 8, 119333 Moscow (Russian Federation)

2016-05-01

We present a fully grid-based approach for solving Hartree–Fock and all-electron Kohn–Sham equations based on low-rank approximation of three-dimensional electron orbitals. Due to the low-rank structure the total complexity of the algorithm depends linearly with respect to the one-dimensional grid size. Linear complexity allows for the usage of fine grids, e.g. 8192{sup 3} and, thus, cheap extrapolation procedure. We test the proposed approach on closed-shell atoms up to the argon, several molecules and clusters of hydrogen atoms. All tests show systematical convergence with the required accuracy.

Identifying approaches for assessing methodological and reporting quality of systematic reviews

DEFF Research Database (Denmark)

Pussegoda, Kusala; Turner, Lucy; Garritty, Chantelle

2017-01-01

there are potential gaps in research best-practice guidance materials. The aims of this study are to identify reports assessing the methodological quality (MQ) and/or reporting quality (RQ) of a cohort of SRs and to assess their number, general characteristics, and approaches to 'quality' assessment over time......BACKGROUND: The methodological quality and completeness of reporting of the systematic reviews (SRs) is fundamental to optimal implementation of evidence-based health care and the reduction of research waste. Methods exist to appraise SRs yet little is known about how they are used in SRs or where...... or reporting guidelines used as proxy to assess RQ were used in 80% (61/76) of identified reports. These included two reporting guidelines (PRISMA and QUOROM) and five quality assessment tools (AMSTAR, R-AMSTAR, OQAQ, Mulrow, Sacks) and GRADE criteria. The remaining 24% (18/76) of reports developed their own...

Improvement of the Assignment Methodology of the Approach Embankment Design to Highway Structures in Difficult Conditions

Science.gov (United States)

Chistyy, Y.; Kuzakhmetova, E.; Fazilova, Z.; Tsukanova, O.

2018-03-01

Design issues of junction of bridges and overhead road with approach embankment are studied. The reasons for the formation of deformations in the road structure are indicated. Activities to ensure sustainability and acceleration of the shrinkage of a weak subgrade approach embankment are listed. The necessity of taking into account the man-made impact of the approach embankment on the subgrade behavior is proved. Modern stabilizing agents to improve the properties of used soils in the embankment and the subgrade are suggested. Clarified methodology for determining an active zone of compression in the subgrade under load from the weight of the embankment is described. As an additional condition to the existing methodology for establishing the lower bound of the active zone of compression it is offered to accept the accuracy of evaluation of soil compressibility and determine shrinkage.

The Possibility of Developing Researches in the Legal Field Making use of the Qualitative Approach Methodology

Directory of Open Access Journals (Sweden)

Adriana Ferreira Serafim de Oliveira

2016-10-01

Full Text Available This article, through the deductive research, discusses the possibility to research in the field of legal sciences through the qualitative methodology used in the researches in Human Sciences. The north for this study was given by the qualitative methodology to the exploration of the content of the bibliography interdisciplinary elected in Law and Education areas, considering the object of the study the connection of the objects of the research in these areas. Education, in Human Sciences, uses this approach to investigate facts through documentary or field research and the same methodology can be applied in the Law area.

Formation of a Methodological Approach to Evaluating the State of Management of Enterprise Flow Processes

Directory of Open Access Journals (Sweden)

Dzobko Iryna P.

2016-02-01

Full Text Available The formation of a methodological approach to evaluating management of the state of enterprise flow processes has been considered. Proceeding from the developed and presented in literary sources theoretical propositions on organization of management of enterprise flow processes, the hypothesis of the study is correlation of quantitative and qualitative evaluations of management effectiveness and formation of the integral index on their basis. The article presents stages of implementation of a methodological approach to evaluating the state of management of enterprise flow processes, which implies indicating the components, their characteristics and methods of research. The composition of indicators, on the basis of which it is possible to evaluate effectiveness of management of enterprise flow processes, has been determined. Grouping of such indicators based on the flow nature of enterprise processes has been performed. The grouping of indicators is justified by a pairwise determination of canonical correlations between the selected groups (the obtained high correlation coefficients confirmed the author’s systematization of indicators. It is shown that a specificity of the formation of a methodological approach to evaluating the state of management of enterprise flow processes requires expansion in the direction of aggregation of the results and determination of factors that influence effectiveness of flow processes management. The article carries out such aggregation using the factor analysis. Distribution of a set of objects into different classes according to the results of the cluster analysis has been presented. To obtain an integral estimation of effectiveness of flow processes management, the taxonomic index of a multidimensional object has been built. A peculiarity of the formed methodological approach to evaluating the state of management of enterprise flow processes is in the matrix correlation of integral indicators calculated on

A methodological approach for designing a usable ontology-based GUI in healthcare.

Science.gov (United States)

Lasierra, N; Kushniruk, A; Alesanco, A; Borycki, E; García, J

2013-01-01

This paper presents a methodological approach to the design and evaluation of an interface for an ontology-based system used for designing care plans for monitoring patients at home. In order to define the care plans, physicians need a tool for creating instances of the ontology and configuring some rules. Our purpose is to develop an interface to allow clinicians to interact with the ontology. Although ontology-driven applications do not necessarily present the ontology in the user interface, it is our hypothesis that showing selected parts of the ontology in a "usable" way could enhance clinician's understanding and make easier the definition of the care plans. Based on prototyping and iterative testing, this methodology combines visualization techniques and usability methods. Preliminary results obtained after a formative evaluation indicate the effectiveness of suggested combination.

Application of a CADIS-like variance reduction technique to electron transport

International Nuclear Information System (INIS)

Dionne, B.; Haghighat, A.

2004-01-01

This paper studies the use of approximate deterministic importance functions to calculate the lower-weight bounds of the MCNP5 weight-window variance reduction technique when applied to electron transport simulations. This approach follows the CADIS (Consistent Adjoint Driven Importance Sampling) methodology developed for neutral particles shielding calculations. The importance functions are calculated using the one-dimensional CEPXS/ONELD code package. Considering a simple 1-D problem, this paper shows that our methodology can produce speedups up to ∼82 using an approximate electron importance function distributions computed in ∼8 seconds. (author)

The object of fashion: methodological approaches to the history of fashion

OpenAIRE

Riello, Giorgio

2011-01-01

This essay considers the role of artefacts in the historical study of dress and fashion and suggests the existence of three different approaches. The field of history of dress and costume has a long tradition going back to the nineteenth century. It adopts the methodologies of art history and considers artefacts as central to the analysis of different periods and themes. In the last few decades the emergence of fashion studies has been interpreted as a distancing from artefacts. It is here cl...

Dynamic investigation of electron trapping and charge decay in electron-irradiated Al sub 2 O sub 3 in a scanning electron microscope: Methodology and mechanisms

CERN Document Server

Fakhfakh, S; Belhaj, M; Fakhfakh, Z; Kallel, A; Rau, E I

2002-01-01

The charging and discharging of polycrystalline Al sub 2 O sub 3 submitted to electron-irradiation in a scanning electron microscope (SEM) are investigated by means of the displacement current method. To circumvent experimental shortcomings inherent to the use of the basic sample holder, a redesign of the latter is proposed and tests are carried out to verify its operation. The effects of the primary beam accelerating voltage on charging, flashover and discharging phenomena during and after electron-irradiation are studied. The experimental results are then analyzed. In particular, the divergence between the experimental data and those predicted by the total electron emission yield approach (TEEYA) is discussed. A partial discharge was observed immediately after the end of the electron-irradiation exposure. The experimental data suggests, that the discharge is due to the evacuation to the ground, along the insulator surface, of released electrons from shallow traps at (or in the close vicinity of) the insulat...

A methodological approach for the identification of arsenic bearing phases in polluted soils

International Nuclear Information System (INIS)

Matera, V.; Le Hecho, I.; Laboudigue, A.; Thomas, P.; Tellier, S.; Astruc, M.

2003-01-01

Arsenic in the three polluted soils is mainly associated with neoformed amorphous iron (hydr)oxides. - A methodological approach is used to characterize arsenic pollution in three soils and to determine arsenic speciation and association with solid phases in three polluted soils. HPLC-ICP-MS was used for arsenic speciation analysis, SEM-EDS and XRD for physical characterization of arsenic pollution, and sequential chemical extractions to identify arsenic distribution. Arsenic was concentrated in the finest size fractions also enriched in iron and aluminium. Total arsenic concentrations in soils are close to 1%. Arsenic was mainly present as arsenate, representing more than 90% of total arsenic. No crystallised arsenic minerals were detected by XRD analysis. SEM-EDS observations indicated arsenic/iron associations. Modified Tessier's procedure showed that arsenic was mainly extracted from amorphous iron oxide phase. The results of this methodological approach lead to predict the formation of iron arsenates in the case of one of the studied soils while arsenic sorption on iron amorphous (hydr)oxides seemed to be the determinant in the two other soils

Postponed variety creation: case study in consumer electronics retail

DEFF Research Database (Denmark)

Appelqvist, Patrik; Gubi, Ebbe

2005-01-01

Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve...... modular product architecture can be utilised to improve operational supply chain performance.......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design....../methodology/approach – Improvement potential is first evaluated qualitatively through interviews with dealers of the case company. Next, the benefit of postponement is evaluated quantitatively using discrete-event simulation with data from operational ERP systems. The conclusions identify conditions under which postponement...

Many-electron approaches in physics, chemistry and mathematics a multidisciplinary view

CERN Document Server

Site, Luigi

2014-01-01

This book provides a broad description of the development and (computational) application of many-electron approaches from a multidisciplinary perspective. In the context of studying many-electron systems Computer Science, Chemistry, Mathematics and Physics are all intimately interconnected. However, beyond a handful of communities working at the interface between these disciplines, there is still a marked separation of subjects. This book seeks to offer a common platform for possible exchanges between the various fields and to introduce the reader to perspectives for potential further developments across the disciplines. The rapid advances of modern technology will inevitably require substantial improvements in the approaches currently used, which will in turn make exchanges between disciplines indispensable. In essence this book is one of the very first attempts at an interdisciplinary approach to the many-electron problem.

Toward Environmentally Robust Organic Electronics: Approaches and Applications.

Science.gov (United States)

Lee, Eun Kwang; Lee, Moo Yeol; Park, Cheol Hee; Lee, Hae Rang; Oh, Joon Hak

2017-11-01

Recent interest in flexible electronics has led to a paradigm shift in consumer electronics, and the emergent development of stretchable and wearable electronics is opening a new spectrum of ubiquitous applications for electronics. Organic electronic materials, such as π-conjugated small molecules and polymers, are highly suitable for use in low-cost wearable electronic devices, and their charge-carrier mobilities have now exceeded that of amorphous silicon. However, their commercialization is minimal, mainly because of weaknesses in terms of operational stability, long-term stability under ambient conditions, and chemical stability related to fabrication processes. Recently, however, many attempts have been made to overcome such instabilities of organic electronic materials. Here, an overview is provided of the strategies developed for environmentally robust organic electronics to overcome the detrimental effects of various critical factors such as oxygen, water, chemicals, heat, and light. Additionally, molecular design approaches to π-conjugated small molecules and polymers that are highly stable under ambient and harsh conditions are explored; such materials will circumvent the need for encapsulation and provide a greater degree of freedom using simple solution-based device-fabrication techniques. Applications that are made possible through these strategies are highlighted. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Theoretical, Methodological, and Empirical Approaches to Cost Savings: A Compendium

Energy Technology Data Exchange (ETDEWEB)

M Weimar

1998-12-10

This publication summarizes and contains the original documentation for understanding why the U.S. Department of Energy's (DOE's) privatization approach provides cost savings and the different approaches that could be used in calculating cost savings for the Tank Waste Remediation System (TWRS) Phase I contract. The initial section summarizes the approaches in the different papers. The appendices are the individual source papers which have been reviewed by individuals outside of the Pacific Northwest National Laboratory and the TWRS Program. Appendix A provides a theoretical basis for and estimate of the level of savings that can be" obtained from a fixed-priced contract with performance risk maintained by the contractor. Appendix B provides the methodology for determining cost savings when comparing a fixed-priced contractor with a Management and Operations (M&O) contractor (cost-plus contractor). Appendix C summarizes the economic model used to calculate cost savings and provides hypothetical output from preliminary calculations. Appendix D provides the summary of the approach for the DOE-Richland Operations Office (RL) estimate of the M&O contractor to perform the same work as BNFL Inc. Appendix E contains information on cost growth and per metric ton of glass costs for high-level waste at two other DOE sites, West Valley and Savannah River. Appendix F addresses a risk allocation analysis of the BNFL proposal that indicates,that the current approach is still better than the alternative.

AN AUTOMATIC AND METHODOLOGICAL APPROACH FOR ACCESSIBLE WEB APPLICATIONS

Directory of Open Access Journals (Sweden)

Lourdes Moreno

2007-06-01

Full Text Available Semantic Web approaches try to get the interoperability and communication among technologies and organizations. Nevertheless, sometimes it is forgotten that the Web must be useful for every user, consequently it is necessary to include tools and techniques doing Semantic Web be accessible. Accessibility and usability are two usually joined concepts widely used in web application development, however their meaning are different. Usability means the way to make easy the use but accessibility is referred to the access possibility. For the first one, there are many well proved approaches in real cases. However, accessibility field requires a deeper research that will make feasible the access to disable people and also the access to novel non-disable people due to the cost to automate and maintain accessible applications. In this paper, we propose one architecture to achieve the accessibility in web-environments dealing with the WAI accessibility standard and the Universal Design paradigm. This architecture tries to control the accessibility in web applications development life-cycle following a methodology starting from a semantic conceptual model and leans on description languages and controlled vocabularies.

GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Z.N. Varlamova

2007-06-01

Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

An intramolecular inverse electron demand Diels–Alder approach to annulated α-carbolines

Directory of Open Access Journals (Sweden)

Zhiyuan Ma

2012-06-01

Full Text Available Intramolecular inverse electron demand cycloadditions of isatin-derived 1,2,4-triazines with acetylenic dienophiles tethered by amidations or transesterifications proceed in excellent yields to produce lactam- or lactone-fused α-carbolines. Beginning with various isatins and alkynyl dienophiles, a pilot-scale library of eighty-eight α-carbolines was prepared by using this robust methodology for biological evaluation.

Simulation of electron spin resonance spectroscopy in diverse environments: An integrated approach

Science.gov (United States)

Zerbetto, Mirco; Polimeno, Antonino; Barone, Vincenzo

2009-12-01

We discuss in this work a new software tool, named E-SpiReS (Electron Spin Resonance Simulations), aimed at the interpretation of dynamical properties of molecules in fluids from electron spin resonance (ESR) measurements. The code implements an integrated computational approach (ICA) for the calculation of relevant molecular properties that are needed in order to obtain spectral lines. The protocol encompasses information from atomistic level (quantum mechanical) to coarse grained level (hydrodynamical), and evaluates ESR spectra for rigid or flexible single or multi-labeled paramagnetic molecules in isotropic and ordered phases, based on a numerical solution of a stochastic Liouville equation. E-SpiReS automatically interfaces all the computational methodologies scheduled in the ICA in a way completely transparent for the user, who controls the whole calculation flow via a graphical interface. Parallelized algorithms are employed in order to allow running on calculation clusters, and a web applet Java has been developed with which it is possible to work from any operating system, avoiding the problems of recompilation. E-SpiReS has been used in the study of a number of different systems and two relevant cases are reported to underline the promising applicability of the ICA to complex systems and the importance of similar software tools in handling a laborious protocol. Program summaryProgram title: E-SpiReS Catalogue identifier: AEEM_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEM_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL v2.0 No. of lines in distributed program, including test data, etc.: 311 761 No. of bytes in distributed program, including test data, etc.: 10 039 531 Distribution format: tar.gz Programming language: C (core programs) and Java (graphical interface) Computer: PC and Macintosh Operating system: Unix and Windows Has the code been vectorized or

Electronic structure of a striped nickelate studied by the exact exchange for correlated electrons (EECE) approach

KAUST Repository

Schwingenschlögl, Udo

2009-12-01

Motivated by a RIXS study of Wakimoto, et al.(Phys. Rev. Lett., 102 (2009) 157001) we use density functional theory to analyze the magnetic order in the nickelate La5/3Sr1/3NiO4 and the details of its crystal and electronic structure. We compare the generalized gradient approximation to the hybrid functional approach of exact exchange for correlated electrons (EECE). In contrast to the former, the latter reproduces the insulating state of the compound and the midgap states. The EECE approach, in general, appears to be appropriate for describing stripe phases in systems with orbital degrees of freedom. Copyright © EPLA, 2009.

Towards an Airframe Noise Prediction Methodology: Survey of Current Approaches

Science.gov (United States)

Farassat, Fereidoun; Casper, Jay H.

2006-01-01

In this paper, we present a critical survey of the current airframe noise (AFN) prediction methodologies. Four methodologies are recognized. These are the fully analytic method, CFD combined with the acoustic analogy, the semi-empirical method and fully numerical method. It is argued that for the immediate need of the aircraft industry, the semi-empirical method based on recent high quality acoustic database is the best available method. The method based on CFD and the Ffowcs William- Hawkings (FW-H) equation with penetrable data surface (FW-Hpds ) has advanced considerably and much experience has been gained in its use. However, more research is needed in the near future particularly in the area of turbulence simulation. The fully numerical method will take longer to reach maturity. Based on the current trends, it is predicted that this method will eventually develop into the method of choice. Both the turbulence simulation and propagation methods need to develop more for this method to become useful. Nonetheless, the authors propose that the method based on a combination of numerical and analytical techniques, e.g., CFD combined with FW-H equation, should also be worked on. In this effort, the current symbolic algebra software will allow more analytical approaches to be incorporated into AFN prediction methods.

A proposed approach to backfit decision-making using risk assessment and benefit-cost methodology

International Nuclear Information System (INIS)

O'Donnell, E.P.; Raney, T.J.

1984-01-01

This paper outlines a proposed approach to backfit decision-making which utilizes quantitative risk assessment techniques, benefit-cost methodology and decision criteria. In general terms, it is structured to provide an objective framework for decision-making aimed at ensuring a positive return on backfit investment while allowing for inclusion of subjective value judgments by the decision-maker. The distributions of the independent variables are combined to arrive at an overall probability distribution for the benefit-cost ratio. In this way, the decision-maker can explicitly establish the probability or level of confidence that a particular backfit will yield benefits in excess of cost. An example is presented demonstrating the application of methodology to a specific plant backfit. (orig.)

The Electronic Revolution in Libraries: Microfilm Deja Vu?

Science.gov (United States)

Cady, Susan A.

1990-01-01

Reviews the use of microfilm as an acquisitions and preservation tool in academic libraries, and discusses how this use has fallen short of predictions that microfilm would revolutionize research methodology and scholarly productivity. This history is used to provide cautionary guidance in approaching the era of electronic documentation. (35…

Quality Assurance and Its Impact from Higher Education Institutions' Perspectives: Methodological Approaches, Experiences and Expectations

Science.gov (United States)

Bejan, Stelian Andrei; Janatuinen, Tero; Jurvelin, Jouni; Klöpping, Susanne; Malinen, Heikki; Minke, Bernhard; Vacareanu, Radu

2015-01-01

This paper reports on methodological approaches, experiences and expectations referring to impact analysis of quality assurance from the perspective of three higher education institutions (students, teaching staff, quality managers) from Germany, Finland and Romania. The presentations of the three sample institutions focus on discussing the core…

Heterogeneous Effects in Education: The Promise and Challenge of Incorporating Intersectionality into Quantitative Methodological Approaches

Science.gov (United States)

Schudde, Lauren

2018-01-01

To date, the theory of intersectionality has largely guided qualitative efforts in social science and education research. Translating the construct to new methodological approaches is inherently complex and challenging, but offers the possibility of breaking down silos that keep education researchers with similar interests--but different…

Orbital approach to the electronic structure of solids

CERN Document Server

Canadell, Enric; Iung, Christophe

2012-01-01

This book provides an intuitive yet sound understanding of how structure and properties of solids may be related. The natural link is provided by the band theory approach to the electronic structure of solids. The chemically insightful concept of orbital interaction and the essential machinery of band theory are used throughout the book to build links between the crystal and electronic structure of periodic systems. In such a way, it is shown how important tools for understandingproperties of solids like the density of states, the Fermi surface etc. can be qualitatively sketched and used to ei

Methodological Approaches to Locating Outlets of the Franchise Retail Network

Directory of Open Access Journals (Sweden)

Grygorenko Tetyana M.

2016-08-01

Full Text Available Methodical approaches to selecting strategic areas of managing the future location of franchise retail network outlets are presented. The main stages in the assessment of strategic areas of managing the future location of franchise retail network outlets have been determined and the evaluation criteria have been suggested. Since such selection requires consideration of a variety of indicators and directions of the assessment, the author proposes a scale of evaluation, which allows generalizing and organizing the research data and calculations of the previous stages of the analysis. The most important criteria and sequence of the selection of the potential franchisees for the franchise retail network have been identified, the technique for their evaluation has been proposed. The use of the suggested methodological approaches will allow the franchiser making sound decisions on the selection of potential target markets, minimizing expenditures of time and efforts on the selection of franchisees and hence optimizing the process of development of the franchise retail network, which will contribute to the formation of its structure.

What Synthesis Methodology Should I Use? A Review and Analysis of Approaches to Research Synthesis.

Science.gov (United States)

Schick-Makaroff, Kara; MacDonald, Marjorie; Plummer, Marilyn; Burgess, Judy; Neander, Wendy

2016-01-01

When we began this process, we were doctoral students and a faculty member in a research methods course. As students, we were facing a review of the literature for our dissertations. We encountered several different ways of conducting a review but were unable to locate any resources that synthesized all of the various synthesis methodologies. Our purpose is to present a comprehensive overview and assessment of the main approaches to research synthesis. We use 'research synthesis' as a broad overarching term to describe various approaches to combining, integrating, and synthesizing research findings. We conducted an integrative review of the literature to explore the historical, contextual, and evolving nature of research synthesis. We searched five databases, reviewed websites of key organizations, hand-searched several journals, and examined relevant texts from the reference lists of the documents we had already obtained. We identified four broad categories of research synthesis methodology including conventional, quantitative, qualitative, and emerging syntheses. Each of the broad categories was compared to the others on the following: key characteristics, purpose, method, product, context, underlying assumptions, unit of analysis, strengths and limitations, and when to use each approach. The current state of research synthesis reflects significant advancements in emerging synthesis studies that integrate diverse data types and sources. New approaches to research synthesis provide a much broader range of review alternatives available to health and social science students and researchers.

Print and Electronic Resources: Usage Statistics at Guru Gobind Singh Indraprastha University Library

Science.gov (United States)

Kapoor, Kanta

2010-01-01

Purpose: The purpose of this paper is to quantify the use of electronic journals in comparison with the print collections in the Guru Gobind Singh Indraprastha University Library. Design/methodology/approach: A detailed analysis was made of the use of lending services, the Xerox facility and usage of electronic journals such as Science Direct,…

Engineered phages for electronics.

Science.gov (United States)

Cui, Yue

2016-11-15

Phages are traditionally widely studied in biology and chemistry. In recent years, engineered phages have attracted significant attentions for functionalization or construction of electronic devices, due to their specific binding, catalytic, nucleating or electronic properties. To apply the engineered phages in electronics, these are a number of interesting questions: how to engineer phages for electronics? How are the engineered phages characterized? How to assemble materials with engineered phages? How are the engineered phages micro or nanopatterned? What are the strategies to construct electronics devices with engineered phages? This review will highlight the early attempts to address these questions and explore the fundamental and practical aspects of engineered phages in electronics, including the approaches for selection or expression of specific peptides on phage coat proteins, characterization of engineered phages in electronics, assembly of electronic materials, patterning of engineered phages, and construction of electronic devices. It provides the methodologies and opens up ex-cit-ing op-por-tu-ni-ties for the development of a variety of new electronic materials and devices based on engineered phages for future applications. Copyright © 2016 Elsevier B.V. All rights reserved.

“New” Antigenic Targets and Methodological Approaches for Refining Laboratory Diagnosis of Antiphospholipid Syndrome

Science.gov (United States)

Misasi, Roberta; Capozzi, Antonella; Longo, Agostina; Recalchi, Serena; Lococo, Emanuela; Alessandri, Cristiano; Conti, Fabrizio; Valesini, Guido

2015-01-01

Antiphospholipid antibodies (aPLs) are a heterogeneous group of antibodies directed against phospholipids or protein/phospholipid complexes. Currently, aPLs are assessed using either “solid-phase” assays that identify anticardiolipin antibodies and anti-β2-glycoprotein I antibodies or “liquid-phase” assay that identifies lupus anticoagulant. However, in the last few years, “new” antigenic targets and methodological approaches have been employed for refining laboratory diagnosis of antiphospholipid syndrome (APS). In this review the potential diagnostic value of antibodies to domains of β2-GPI, prothrombin/phosphatidylserine, vimentin/cardiolipin, protein S, protein C, annexin A2, annexin A5, and phospholipid antigens is discussed. Moreover, new technical approaches, including chemiluminescence, multiline dot assay, and thin layer chromatography (TLC) immunostaining, which utilize different supports for detection of aPL, have been developed. A special focus has been dedicated on “seronegative” APS, that is, those patients with a clinical profile suggestive of APS (thromboses, recurrent miscarriages, or foetal loss), who are persistently negative for the routinely used aPL. Recent findings suggest that, in sera from patients with SN-APS, antibodies may be detected using “new” antigenic targets (mainly vimentin/cardiolipin) or methodological approaches different from traditional techniques (TLC immunostaining). Thus, APS represents a mosaic, in which antibodies against different antigenic targets may be detected thanks to the continuously evolving new technologies. PMID:25874238

Understanding electron magnetic circular dichroism in a transition potential approach

Science.gov (United States)

Barthel, J.; Mayer, J.; Rusz, J.; Ho, P.-L.; Zhong, X. Y.; Lentzen, M.; Dunin-Borkowski, R. E.; Urban, K. W.; Brown, H. G.; Findlay, S. D.; Allen, L. J.

2018-04-01

This paper introduces an approach based on transition potentials for inelastic scattering to understand the underlying physics of electron magnetic circular dichroism (EMCD). The transition potentials are sufficiently localized to permit atomic-scale EMCD. Two-beam and three-beam systematic row cases are discussed in detail in terms of transition potentials for conventional transmission electron microscopy, and the basic symmetries which arise in the three-beam case are confirmed experimentally. Atomic-scale EMCD in scanning transmission electron microscopy (STEM), using both a standard STEM probe and vortex beams, is discussed.

An integrative approach to the design methodology for 3-phase power conditioners in Photovoltaic Grid-Connected systems

International Nuclear Information System (INIS)

Rey-Boué, Alexis B.; García-Valverde, Rafael; Ruz-Vila, Francisco de A.; Torrelo-Ponce, José M.

2012-01-01

Highlights: ► A design methodology for Photovoltaic grid-connected systems is presented. ► Models of the Photovoltaic Generator and the 3-phase Inverter are described. ► The power factor and the power quality are regulated with vector control. ► Simulation and experimental results validate the design methodology. ► The proposed methodology can be extended to any Renewable or Industrial System. - Abstract: A novel methodology is presented in this paper, for the design of the Power and Control Subsystems of a 3-phase Photovoltaic Grid-Connected system in an easy and comprehensive way, as an integrative approach. At the DC side of the Power Subsystem, the Photovoltaic Generator modeling is revised and a simple model is proposed, whereas at the AC side, a vector analysis is done to deal with the instantaneous 3-phase variables of the grid-connected Voltage Source Inverter. A d–q control approach is established in the Control Subsystem, along with its specific tuned parameters, as a vector control alternative which will allow the decoupled control of the instantaneous active and reactive powers. A particular Case of Study is presented to illustrate the behavior of the design methodology regarding the fulfillment of the Photovoltaic plant specifications. Some simulations are run to study the performance of the Photovoltaic Generator together with the exerted d–q control to the grid-connected 3-phase inverter, and some experimental results, obtained from a built flexible platform, are also shown. The simulations and the experimental results validate the overall performance of the 3-phase Photovoltaic Grid-Connected system due to the attained unitary power factor operation together with good power quality. The final validation of the proposed design methodology is also achieved.

Quantum dynamical simulation of photoinduced electron transfer processes in dye-semiconductor systems: theory and application to coumarin 343 at TiO₂.

Science.gov (United States)

Li, Jingrui; Kondov, Ivan; Wang, Haobin; Thoss, Michael

2015-04-10

A recently developed methodology to simulate photoinduced electron transfer processes at dye-semiconductor interfaces is outlined. The methodology employs a first-principles-based model Hamiltonian and accurate quantum dynamics simulations using the multilayer multiconfiguration time-dependent Hartree approach. This method is applied to study electron injection in the dye-semiconductor system coumarin 343-TiO2. Specifically, the influence of electronic-vibrational coupling is analyzed. Extending previous work, we consider the influence of Dushinsky rotation of the normal modes as well as anharmonicities of the potential energy surfaces on the electron transfer dynamics.

Exciton Scattering approach for conjugated macromolecules: from electronic spectra to electron-phonon coupling

Science.gov (United States)

Tretiak, Sergei

2014-03-01

The exciton scattering (ES) technique is a multiscale approach developed for efficient calculations of excited-state electronic structure and optical spectra in low-dimensional conjugated macromolecules. Within the ES method, the electronic excitations in the molecular structure are attributed to standing waves representing quantum quasi-particles (excitons), which reside on the graph. The exciton propagation on the linear segments is characterized by the exciton dispersion, whereas the exciton scattering on the branching centers is determined by the energy-dependent scattering matrices. Using these ES energetic parameters, the excitation energies are then found by solving a set of generalized ``particle in a box'' problems on the graph that represents the molecule. All parameters can be extracted from quantum-chemical computations of small molecular fragments and tabulated in the ES library for further applications. Subsequently, spectroscopic modeling for any macrostructure within considered molecular family could be performed with negligible numerical effort. The exciton scattering properties of molecular vertices can be further described by tight-binding or equivalently lattice models. The on-site energies and hopping constants are obtained from the exciton dispersion and scattering matrices. Such tight-binding model approach is particularly useful to describe the exciton-phonon coupling, energetic disorder and incoherent energy transfer in large branched conjugated molecules. Overall the ES applications accurately reproduce the optical spectra compared to the reference quantum chemistry results, and make possible to predict spectra of complex macromolecules, where conventional electronic structure calculations are unfeasible.

Contemporary strategic management approach in the defense system by U.S. methodology concept

Directory of Open Access Journals (Sweden)

Veselin I. Mrdak

2013-12-01

Full Text Available The paper wants to emphasize the importance of contemporary strategic management approachs in the defense system. Displays the work of American author Leslie Lewis and C. Robert Roll "Strategy-to- tasks: a methodology for resource allocation and management". It were used by parts of the discussion above, in order to describe the strategy-to-tasks methodology for planning, programming and budgeting system (PPBS. In developed Western countries adopted some elements of strategic management to determine and monitor the execution of strategic plans in the defense system. This trend is spreading to other countries as a result of the necessity of obeying certain methodological and technological achievements. The uncritical acceptance of a strategic management approach can cause great confusion and problems, and the terminology and scientific explanation for this trend is of great importance. Introduction PPBS is a resource management framework based on force planning concept. It was developed at the lRand Company during the late eighties and is adapted to the special needs of several DoD organization. The planning, programming and budgeting system (PPBS PPBS is DoD`ş primary system for planning and managing defense resources. It links the overall U.S. national security strategy to specific programs. It was designed to facilitate fiscally-constrained planning, programming and budgeting in terms of complete programs (i.e. forces and systems rather than through artificial budget categories. The goal is to determine forces, systems and program costs. Strategy-to-tasks and the PPBS The Strategy-To-Tasks methodology, regardless of its application, it must be consistent and supportive of each phase of the PPBS. This section describes the basics frameworks of which are adapted to resource allocation and management activities for the Special Operations Command (USSOCOM. The authors have used it during the various phases of the PPBS. The National Security

What Synthesis Methodology Should I Use? A Review and Analysis of Approaches to Research Synthesis

Science.gov (United States)

Schick-Makaroff, Kara; MacDonald, Marjorie; Plummer, Marilyn; Burgess, Judy; Neander, Wendy

2016-01-01

Background When we began this process, we were doctoral students and a faculty member in a research methods course. As students, we were facing a review of the literature for our dissertations. We encountered several different ways of conducting a review but were unable to locate any resources that synthesized all of the various synthesis methodologies. Our purpose is to present a comprehensive overview and assessment of the main approaches to research synthesis. We use ‘research synthesis’ as a broad overarching term to describe various approaches to combining, integrating, and synthesizing research findings. Methods We conducted an integrative review of the literature to explore the historical, contextual, and evolving nature of research synthesis. We searched five databases, reviewed websites of key organizations, hand-searched several journals, and examined relevant texts from the reference lists of the documents we had already obtained. Results We identified four broad categories of research synthesis methodology including conventional, quantitative, qualitative, and emerging syntheses. Each of the broad categories was compared to the others on the following: key characteristics, purpose, method, product, context, underlying assumptions, unit of analysis, strengths and limitations, and when to use each approach. Conclusions The current state of research synthesis reflects significant advancements in emerging synthesis studies that integrate diverse data types and sources. New approaches to research synthesis provide a much broader range of review alternatives available to health and social science students and researchers. PMID:29546155

What Synthesis Methodology Should I Use? A Review and Analysis of Approaches to Research Synthesis.

Directory of Open Access Journals (Sweden)

Kara Schick-Makaroff

2016-03-01

Full Text Available Background: When we began this process, we were doctoral students and a faculty member in a research methods course. As students, we were facing a review of the literature for our dissertations. We encountered several different ways of conducting a review but were unable to locate any resources that synthesized all of the various synthesis methodologies. Our purpose is to present a comprehensive overview and assessment of the main approaches to research synthesis. We use ‘research synthesis’ as a broad overarching term to describe various approaches to combining, integrating, and synthesizing research findings. Methods: We conducted an integrative review of the literature to explore the historical, contextual, and evolving nature of research synthesis. We searched five databases, reviewed websites of key organizations, hand-searched several journals, and examined relevant texts from the reference lists of the documents we had already obtained. Results: We identified four broad categories of research synthesis methodology including conventional, quantitative, qualitative, and emerging syntheses. Each of the broad categories was compared to the others on the following: key characteristics, purpose, method, product, context, underlying assumptions, unit of analysis, strengths and limitations, and when to use each approach. Conclusions: The current state of research synthesis reflects significant advancements in emerging synthesis studies that integrate diverse data types and sources. New approaches to research synthesis provide a much broader range of review alternatives available to health and social science students and researchers.

Cyber Physical Systems Approach to Power Electronics Education

Directory of Open Access Journals (Sweden)

Marko Vekić

2012-12-01

Full Text Available This paper proposes a Cyber Physical Approach (CPS to power electronics (PE education where all aspects of PE technology from circuit topology to the implementation of real time control code on a microprocessor are dealt with as an inseparable whole, and only the system complexity is increased during the course of instruction. This approach is now made practical thanks to the affordable and unrestricted access to high-power PE laboratory infrastructure (PE laboratory in a box in the form of high-fidelity digital PE emulators with 1us calculation time step and latency.

Molecular self-assembly approaches for supramolecular electronic and organic electronic devices

Science.gov (United States)

Yip, Hin-Lap

Molecular self-assembly represents an efficient bottom-up strategy to generate structurally well-defined aggregates of semiconducting pi-conjugated materials. The capability of tuning the chemical structures, intermolecular interactions and nanostructures through molecular engineering and novel materials processing renders it possible to tailor a large number of unprecedented properties such as charge transport, energy transfer and light harvesting. This approach does not only benefit traditional electronic devices based on bulk materials, but also generate a new research area so called "supramolecular electronics" in which electronic devices are built up with individual supramolecular nanostructures with size in the sub-hundred nanometers range. My work combined molecular self-assembly together with several novel materials processing techniques to control the nucleation and growth of organic semiconducting nanostructures from different type of pi-conjugated materials. By tailoring the interactions between the molecules using hydrogen bonds and pi-pi stacking, semiconducting nanoplatelets and nanowires with tunable sizes can be fabricated in solution. These supramolecular nanostructures were further patterned and aligned on solid substrates through printing and chemical templating methods. The capability to control the different hierarchies of organization on surface provides an important platform to study their structural-induced electronic properties. In addition to using molecular self-assembly to create different organic nanostructures, functional self-assembled monolayer (SAM) formed by spontaneous chemisorption on surfaces was used to tune the interfacial property in organic solar cells. Devices showed dramatically improved performance when appropriate SAMs were applied to optimize the contact property for efficiency charge collection.

Reduction in alert fatigue in an assisted electronic prescribing system, through the Lean Six Sigma methodology.

Science.gov (United States)

Cuéllar Monreal, Mª Jesús; Reig Aguado, Jorge; Font Noguera, Isabel; Poveda Andrés, José Luis

2017-01-01

To reduce the alert fatigue in our Assisted Electronic Prescribing System (AEPS), through the Lean Six Sigma (LSS) methodology. An observational (transversal) and retrospective study, in a general hospital with 850 beds and AEPS. The LSS methodology was followed in order to evaluate the alert fatigue situation in the AEPS system, to implement improvements, and to assess outcomes. The alerts generated during two trimesters studied (before and after the intervention) were analyzed. In order to measure the qualitative indicators, the most frequent alert types were analyzed, as well as the molecules responsible for over 50% of each type of alert. The action by the prescriber was analyzed in a sample of 496 prescriptions that generated such alerts. For each type of alert and molecule, there was a prioritization of the improvements to be implemented according to the alert generated and its quality. A second survey evaluated the pharmacist action for the alerts most highly valued by physicians. The problem, the objective, the work team and the project schedule were defined. A survey was designed in order to understand the opinion of the client about the alert system in the program. Based on the surveys collected (n = 136), the critical characteristics and the quanti/qualitative indicators were defined. Sixty (60) fields in the alert system were modified, corresponding to 32 molecules, and this led to a 28% reduction in the total number of alerts. Regarding quality indicators, false po sitive results were reduced by 25% (p < 0.05), 100% of those alerts ignored with justification were sustained, and there were no significant differences in user adherence to the system. The project improvements and outcomes were reviewed by the work team. LSS methodology has demonstrated being a valid tool for the quantitative and qualitative improvement of the alert system in an Assisted Electronic Prescription Program, thus reducing alert fatigue. Copyright AULA MEDICA EDICIONES 2014

Scalable Microfabrication Procedures for Adhesive-Integrated Flexible and Stretchable Electronic Sensors

Science.gov (United States)

Kang, Dae Y.; Kim, Yun-Soung; Ornelas, Gladys; Sinha, Mridu; Naidu, Keerthiga; Coleman, Todd P.

2015-01-01

New classes of ultrathin flexible and stretchable devices have changed the way modern electronics are designed to interact with their target systems. Though more and more novel technologies surface and steer the way we think about future electronics, there exists an unmet need in regards to optimizing the fabrication procedures for these devices so that large-scale industrial translation is realistic. This article presents an unconventional approach for facile microfabrication and processing of adhesive-peeled (AP) flexible sensors. By assembling AP sensors on a weakly-adhering substrate in an inverted fashion, we demonstrate a procedure with 50% reduced end-to-end processing time that achieves greater levels of fabrication yield. The methodology is used to demonstrate the fabrication of electrical and mechanical flexible and stretchable AP sensors that are peeled-off their carrier substrates by consumer adhesives. In using this approach, we outline the manner by which adhesion is maintained and buckling is reduced for gold film processing on polydimethylsiloxane substrates. In addition, we demonstrate the compatibility of our methodology with large-scale post-processing using a roll-to-roll approach. PMID:26389915

General approach to understanding the electronic structure of graphene on metals

International Nuclear Information System (INIS)

Voloshina, E N; Dedkov, Yu S

2014-01-01

This manuscript presents the general approach to the understanding of the connection between bonding mechanism and electronic structure of graphene on metals. To demonstrate its validity, two limiting cases of ‘weakly’ and ‘strongly’ bonded graphene on Al(111) and Ni(111) are considered, where the Dirac cone is preserved or fully destroyed, respectively. Furthermore, the electronic structure, i.e. doping level, hybridization effects, as well as a gap formation at the Dirac point of the intermediate system, graphene/Cu(111), is fully understood in the framework of the proposed approach. This work summarises the long-term debates regarding connection of the bonding strength and the valence band modification in the graphene/metal systems and paves a way for the effective control of the electronic states of graphene in the vicinity of the Fermi level. (paper)

Electron-plasmon and electron-phonon satellites in the angle-resolved photoelectron spectra of n -doped anatase TiO2

Science.gov (United States)

Caruso, Fabio; Verdi, Carla; Poncé, Samuel; Giustino, Feliciano

2018-04-01

We develop a first-principles approach based on many-body perturbation theory to investigate the effects of the interaction between electrons and carrier plasmons on the electronic properties of highly doped semiconductors and oxides. Through the evaluation of the electron self-energy, we account simultaneously for electron-plasmon and electron-phonon coupling in theoretical calculations of angle-resolved photoemission spectra, electron linewidths, and relaxation times. We apply this methodology to electron-doped anatase TiO2 as an illustrative example. The simulated spectra indicate that electron-plasmon coupling in TiO2 underpins the formation of satellites at energies comparable to those of polaronic spectral features. At variance with phonons, however, the energy of plasmons and their spectral fingerprints depends strongly on the carrier concentration, revealing a complex interplay between plasmon and phonon satellites. The electron-plasmon interaction accounts for approximately 40% of the total electron-boson interaction strength, and it is key to improve the agreement with measured quasiparticle spectra.

[SciELO: method for electronic publishing].

Science.gov (United States)

Laerte Packer, A; Rocha Biojone, M; Antonio, I; Mayumi Takemaka, R; Pedroso García, A; Costa da Silva, A; Toshiyuki Murasaki, R; Mylek, C; Carvalho Reisl, O; Rocha F Delbucio, H C

2001-01-01

It describes the SciELO Methodology Scientific Electronic Library Online for electronic publishing of scientific periodicals, examining issues such as the transition from traditional printed publication to electronic publishing, the scientific communication process, the principles which founded the methodology development, its application in the building of the SciELO site, its modules and components, the tools use for its construction etc. The article also discusses the potentialities and trends for the area in Brazil and Latin America, pointing out questions and proposals which should be investigated and solved by the methodology. It concludes that the SciELO Methodology is an efficient, flexible and wide solution for the scientific electronic publishing.

THEORETICAL AND METHODOLOGICAL APPROACHES TO THE STUDY OF PROTEST ACTIVITY IN THE WESTERN SOCIOLOGICAL THOUGHT

OpenAIRE

Купрєєва, Ю. О.

2015-01-01

In this article the author discusses the main theoretical and methodological approaches to the study of protest activity. Among them - the theory of collective behavior, the relative deprivation theory, the new social movements theory and the resource mobilization theory. Highlighted their strengths and weaknesses. Focused on the new direction of protest studies connected with the development of the Internet.

Methodological approach to simulation and choice of ecologically efficient and energetically economic wind turbines (WT)

Science.gov (United States)

Bespalov, Vadim; Udina, Natalya; Samarskaya, Natalya

2017-10-01

Use of wind energy is related to one of the prospective directions among renewed energy sources. A methodological approach is reviewed in the article to simulation and choice of ecologically efficient and energetically economic wind turbines on the designing stage taking into account characteristics of natural-territorial complex and peculiarities of anthropogenic load in the territory of WT location.

PREVAIL: latest electron optics results

Science.gov (United States)

Pfeiffer, Hans C.; Golladay, Steven D.; Gordon, Michael S.; Kendall, Rodney A.; Lieberman, Jon E.; Rockrohr, James D.; Stickel, Werner; Yamaguchi, Takeshi; Okamoto, Kazuya; Umemoto, Takaaki; Shimizu, Hiroyasu; Kojima, Shinichi; Hamashima, Muneki

2002-07-01

The PREVAIL electron optics subsystem developed by IBM has been installed at Nikon's facility in Kumagaya, Japan, for integration into the Nikon commercial EPL stepper. The cornerstone of the electron optics design is the Curvilinear Variable Axis Lens (CVAL) technique originally demonstrated with a proof of concept system. This paper presents the latest experimental results obtained with the electron optical subsystem at Nikon's facility. The results include micrographs illustrating proper CVAL operation through the spatial resolution achieved over the entire optical field of view. They also include data on the most critical issue of the EPL exposure approach: subfield stitching. The methodology of distortion correction will be described and both micrographs and metrology data of stitched subfields will be presented. This paper represents a progress report of the IBM/Nikon alliance activity on EPL.

Application of methodological approach to selection of sportswomen to calisthenics teams for group exercises, considering compatibility factor

Directory of Open Access Journals (Sweden)

O.S. Kozhanova

2015-04-01

Full Text Available Purpose: motivation of methodological approach to selection of sportswomen to calisthenics teams for group exercises considering compatibility factor. Material: in the research 40 high qualification sportswomen of 17-23 yrs age with sport experience of 11-16 years participated. With cluster analysis 10 gymnasts with morphological indicators, meeting modern standards of group exercises were selected. Results: we found 5 generalized factors, which characterize structure of selection to teams and determines 72% of dispersion. Influence of kinds and connected with them criteria of compatibility on efficiency of gymnasts’ competition functioning were also determined. The authors substantiated methodological approach to selection of sportswomen to calisthenics teams for group exercises, considering compatibility factor. Conclusions: in selection to calisthenics teams for group exercises it is purposeful to realize complex registration of compatibility kinds, considering gymnasts’ similar features by recommended indicators.

Contemporary musical historiography and the problems of the methodological approach

Directory of Open Access Journals (Sweden)

Vasić Aleksandar N.

2005-01-01

Full Text Available The first foreign review of the general history of music translated to Serbian language was Karl Nef's Einführung in die Musikgeschichte. It was published in Belgrade, in 1937. During the '70s and '80s of the 20th century, there were translated popularly conceived histories of music of Luciano Alberti and Nobert Difourc. In 2002/2004 the Belgrade publisher "Clio" issued the second and third volume of Gerald Abraham's Concise Oxford History of Music. It was estimated that the long pause, as well as the choice of the prominent British author, present strong reasons for detailed critical study approach to the latest edition. The character of the study is threefold and interdisciplinary: musicological, philological and bibliographical. The first part of the study is the analysis of the writer's methodological procedure that can be discussed. Namely, next to the significant virtues in expert and style such as conciseness in statements original observations and evaluations, and literate, aesthetic attractiveness, Abraham's book also contains contradictory of methodological character. The writer is not completely consistent in conducting of the chosen methodological procedure. On one side, he does not describe the history of European music with period terms such as baroque, classicism impressionism or expressionism. On the other side, he nevertheless uses period terms in some way, but only in relation to the music of the 19th century. The only style that The Concise Oxford History of Music elaborates is Romanticism. Such inconsistent ness cannot be justified even more from the aspect of potential student readers of this reference book. The second part of disquisition contains analysis and evaluation of the Serbian translation of Abraham's History. That philological section of the work discusses mistakes in translation, controversial examples of transcription and adaptation of foreign names, grammatical, lexical and punctuation omissions. Also

Archetype modeling methodology.

Science.gov (United States)

Moner, David; Maldonado, José Alberto; Robles, Montserrat

2018-03-01

Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

Usability of Public Administration Electronic Forms

Directory of Open Access Journals (Sweden)

Miloslav Hub

2015-06-01

Full Text Available This paper is focused on the testing and evaluating of public administration electronic forms from the usability point of view. Its objective is to design a suitable methodology for usability testing of electronic forms and their description and distribution to public administration information systems professionals. Firstly, methods of usability engineering are summarized and a suitable method for usability testing and evaluation of electronic forms is selected. Farther, the methodology of electronic forms usability testing that uses the selected method is suggested. In the last part of the paper the case study that uses the proposed methodology is suggested and performed. The main benefit of the work is the design of testing methodology and proposition of the set of recommendations for new public administration electronic forms design.

Path-integral approach to resonant electron-molecule scattering

International Nuclear Information System (INIS)

Winterstetter, M.; Domcke, W.

1993-01-01

A path-integral formulation of resonant electron-molecule scattering is developed within the framework of the projection-operator formalism of scattering theory. The formation and decay of resonances is treated in real time as a quantum-mechanical electronic-tunneling process, modified by the coupling of the electronic motion with the nuclear degrees of freedom. It is shown that the electronic continuum can be summed over in the path-integral formulation, resulting formally in the path integral for an effective two-state system with coupling to vibrations. The harmonic-oscillator approximation is adopted for the vibrational motion in the present work. Approximation methods are introduced which render the numerical evaluation of the sum over paths feasible for up to ∼10 3 elementary time slices. The theory is numerically realized for simple but nontrivial models representing the 2 Π g d-wave shape resonance in e - +N 2 collisions and the 2 Σ u + p-wave shape resonance in e - +H 2 collisions, respectively. The accuracy of the path-integral results is assessed by comparison with exact numerical reference data for these models. The essential virtue of the path-integral approach is the fact that the computational effort scales at most linearly with the number of vibrational degrees of freedom. The path-integral method is thus well suited to treat electron collisions with polyatomic molecules and molecular aggregates

Directed Graph Methodology for Acquisition Path Analysis: a possible tool to support the state-level approach

International Nuclear Information System (INIS)

Vincze, Arpad; Nemeth, Andras

2013-01-01

According to a recent statement, the IAEA seeks to develop a more effective safeguards system to achieve greater deterrence, because deterrence of proliferation is much more effective than detection. To achieve this goal, a less predictive safeguards system is being developed based on the advanced state-level approach that is driven by all available safeguards-relevant information. The 'directed graph analysis' is recommended as a possible methodology to implement acquisition path analysis by the IAEA to support the State evaluation process. The basic methodology is simple, well established, powerful, and its adaptation to the modelling of the nuclear profile of a State requires minimum software development. Based on this methodology the material flow network model has been developed under the Hungarian Support Programme to the IAEA, which is described in detail. In the proposed model, materials in different chemical and physical form can flow through pipes representing declared processes, material transports, diversions or undeclared processes. The nodes of the network are the material types, while the edges of the network are the pipes. A state parameter (p) is assigned to each node and edge representing the probability of their existence in the State. The possible application of this model in the State-level analytical approach will be discussed and outlook for further work will be given. The paper is followed by the slides of the presentation

Scenario development methodologies

International Nuclear Information System (INIS)

Eng, T.; Hudson, J.; Stephansson, O.

1994-11-01

In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are a) Event tree analysis, b) Influence diagrams and c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs

Teaching Electronic Literacy A Concepts-Based Approach for School Library Media Specialists

CERN Document Server

Craver, Kathleen W

1997-01-01

School library media specialists will find this concepts-based approach to teaching electronic literacy an indispensable basic tool for instructing students and teachers. It provides step-by-step instruction on how to find and evaluate needed information from electronic databases and the Internet, how to formulate successful electronic search strategies and retrieve relevant results, and how to interpret and critically analyze search results. The chapters contain a suggested lesson plan and sample assignments for the school library media specialist to use in teaching electronic literacy skills

Methodology for Assessing the Quality of Agribusiness Activity Based on the Environmentally Responsible Approach

Directory of Open Access Journals (Sweden)

Anna Antonovna Anfinogentova

2017-06-01

Full Text Available The article is devoted to the research and development of quality evaluation methods of agro-industrial enterprises activity in the regional economy with the use of the ecological approach. The hypothesis of the study is that the activity of the economic entities (as well as of agribusiness must be assessed not only in the context of economic efficiency and effectiveness, but also in the context of environmental ethics and environmental aggression. As the initial data, we have used the indicators of economic statistics of Russian agrarian-oriented regions, as well as the data received from management reporting on the sample of enterprises of three regions (the Belgorod and Moscow regions, Krasnodar Territory. The article offers the economic and mathematical approach for measuring the level of the environmental responsibility of agro-industrial enterprises on the basic formula of the Mandelbrot set and statistical indicator of Hurst. Our scientific contribution is the development of a modified methodology for assessing the quality of the activity of agro-industrial enterprises using the parameter characterizing the level of environmental ethics and environmental aggression of these entities. The main result of the study is the approbation of the method, which has shown its practical applicability and relative coherence with certain indicators of regional ecological statistics. The proposed method is characterized by the integration of the different mathematical approaches and as an adaptive assessment tool that can be used to assess the quality of the activity of both agro-industrial enterprises and enterprises of other industries and fields of the economy. In the further works, the authors plan to develop methodological approaches to the assessment of the quality of agro-industrial products. At the same time, the main attention will be paid to the ecological and social component of the quality.

Analytic approach to auroral electron transport and energy degradation

International Nuclear Information System (INIS)

Stamnes, K.

1980-01-01

The interaction of a beam of auroral electrons with the atmosphere is described by the linear transport equation, encompassing discrete energy loss, multiple scattering, and secondary electrons. A solution to the transport equation provides the electron intensity as a function of altitude, pitch angle (with respect to the geomagnetic field) and energy. A multi-stream (discrete ordinate) approximation to the transport equation is developed. An analytic solution is obtained in this approximation. The computational scheme obtained by combining the present transport code with the energy degradation method of Swartz (1979) conserves energy identically. The theory provides a framework within which angular distributions can be easily calculated and interpreted. Thus, a detailed study of the angular distributions of 'non-absorbed' electrons (i.e., electrons that have lost just a small fraction of their incident energy) reveals a systematic variation with incident angle and energy, and with penetration depth. The present approach also gives simple yet accurate solutions in low order multi-stream approximations. The accuracy of the four-stream approximation is generally within a few per cent, whereas two-stream results for backscattered mean intensities and fluxes are accurate to within 10-15%. (author)

Hadoop Cluster Deployment: A Methodological Approach

Directory of Open Access Journals (Sweden)

Ronaldo Celso Messias Correia

2018-05-01

Full Text Available For a long time, data has been treated as a general problem because it just represents fractions of an event without any relevant purpose. However, the last decade has been just about information and how to get it. Seeking meaning in data and trying to solve scalability problems, many frameworks have been developed to improve data storage and its analysis. As a framework, Hadoop was presented as a powerful tool to deal with large amounts of data. However, it still causes doubts about how to deal with its deployment and if there is any reliable method to compare the performance of distinct Hadoop clusters. This paper presents a methodology based on benchmark analysis to guide the Hadoop cluster deployment. The experiments employed The Apache Hadoop and the Hadoop distributions of Cloudera, Hortonworks, and MapR, analyzing the architectures on local and on clouding—using centralized and geographically distributed servers. The results show the methodology can be dynamically applied on a reliable comparison among different architectures. Additionally, the study suggests that the knowledge acquired can be used to improve the data analysis process by understanding the Hadoop architecture.

Evaluation of Interoperability Protocols in Repositories of Electronic Theses and Dissertations

Science.gov (United States)

Hakimjavadi, Hesamedin; Masrek, Mohamad Noorman

2013-01-01

Purpose: The purpose of this study is to evaluate the status of eight interoperability protocols within repositories of electronic theses and dissertations (ETDs) as an introduction to further studies on feasibility of deploying these protocols in upcoming areas of interoperability. Design/methodology/approach: Three surveys of 266 ETD…

Task to Training Matrix Design for Decommissioning Engineer on the basis of Systematic Approach to Training Methodology

Energy Technology Data Exchange (ETDEWEB)

Kwak, Jeong Keun [KHNP, Ulsan (Korea, Republic of)

2016-10-15

In nuclear history, before Chernobyl Accident, Three Mile Island (TMI) Accident was the severest accident. For this reason, to resolve the disclosed or potential possibilities of nuclear accident, more than one hundred countermeasures were proposed by United States Nuclear Regulatory Commission (USNRC). Among various recommendations by USNRC, one suggestion was related to training aspect. It was Systematic Approach to Training (SAT) and this event was the initiation of SAT methodology in the world. In Korea, upcoming June 2017, Kori Unit-1 NPP is scheduled to be shut down and it will experience NPP decommissioning for the first time. Present study aims to establish concrete training foundation for NPP decommissioning engineers based on Systematic Approach to Training (SAT) methodology, in particular, Task to Training Matrix (TTM). The objective of this paper is to organize TTM on the basis of SAT for NPP decommissioning engineer. For this reason, eighteen tasks are yielded through Job and Task Analysis (JTA) process. After that, for the settlement of Task to Training Matrix (TTM), various data are determined such as element, condition, standard, knowledge and skill, learning objective and training setting. When it comes to training in nuclear industry, SAT methodology has been the unwavering principle in Korea since NPPs export to UAE.

Design for Reliability of Power Electronic Systems

DEFF Research Database (Denmark)

Wang, Huai; Ma, Ke; Blaabjerg, Frede

2012-01-01

Advances in power electronics enable efficient and flexible processing of electric power in the application of renewable energy sources, electric vehicles, adjustable-speed drives, etc. More and more efforts are devoted to better power electronic systems in terms of reliability to ensure high......). A collection of methodologies based on Physics-of-Failure (PoF) approach and mission profile analysis are presented in this paper to perform reliability-oriented design of power electronic systems. The corresponding design procedures and reliability prediction models are provided. Further on, a case study...... on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical components IGBTs. Different aspects of improving the reliability of the power converter are mapped. Finally, the challenges and opportunities to achieve more reliable power electronic systems are addressed....

Some implications of the Hartree product treatment of the quantum nuclei in the ab initio nuclear–electronic orbital methodology

Energy Technology Data Exchange (ETDEWEB)

Gharabaghi, Masumeh [Faculty of Chemical and Petroleum Sciences, Shahid Beheshti University, G. C., Evin, Tehran, 19839, P.O. Box 19395-4716 (Iran, Islamic Republic of); Shahbazian, Shant, E-mail: chemist_shant@yahoo.com [Department of Physics, Shahid Beheshti University, G. C., Evin, Tehran, 19839, P.O. Box 19395-4716 (Iran, Islamic Republic of)

2016-12-09

In this letter the conceptual and computational implications of the Hartree product type nuclear wavefunction introduced recently within the context of the ab initio non-Born–Oppenheimer Nuclear–electronic orbital (NEO) methodology are considered. It is demonstrated that this wavefunction may imply a pseudo-adiabatic separation of the nuclei and electrons and each nucleus is conceived as a quantum oscillator while a non-Coulombic effective Hamiltonian is deduced for electrons. Using the variational principle this Hamiltonian is employed to derive a modified set of single-component Hartree–Fock equations which are equivalent to the multi-component version derived previously within the context of the NEO and, easy to be implemented computationally. - Highlights: • The Hartree product wavefunction is used for the quantum nuclei of a molecule. • With this wavefunction quantum nuclei may be conceived as quantum oscillators. • Using variational integral, non-Coulomb effective electronic Hamiltonian was derived. • A set of modified Hartree–Fock equations were derived from this Hamiltonian. • The derived equations are equivalent to the multi-component Hartree–Fock equations.

Path integral approach to electron scattering in classical electromagnetic potential

International Nuclear Information System (INIS)

Xu Chuang; Feng Feng; Li Ying-Jun

2016-01-01

As is known to all, the electron scattering in classical electromagnetic potential is one of the most widespread applications of quantum theory. Nevertheless, many discussions about electron scattering are based upon single-particle Schrodinger equation or Dirac equation in quantum mechanics rather than the method of quantum field theory. In this paper, by using the path integral approach of quantum field theory, we perturbatively evaluate the scattering amplitude up to the second order for the electron scattering by the classical electromagnetic potential. The results we derive are convenient to apply to all sorts of potential forms. Furthermore, by means of the obtained results, we give explicit calculations for the one-dimensional electric potential. (paper)

THE FUTURE OF LANGUAGE TEACHING METHODOLOGY

OpenAIRE

Ted Rodgers

1998-01-01

Abstract : This paper reviews the current state of ELT methodology, particulary in respect to a number of current views suggesting that the profession is now in a "post-methods" era in which previous attention to Methods (Total Physical Response, Silent Way, Natural Approach, etc.) has given way to a more generic approach to ELT methodology. Ten potential future courses of ELT methodology are outlines and three of these are considered in some detail. Particular consideration is given as to ho...

METHODOLOGICAL NOTES: Integrating magnetism into semiconductor electronics

Science.gov (United States)

Zakharchenya, Boris P.; Korenev, Vladimir L.

2005-06-01

The view of a ferromagnetic-semiconducting hybrid structure as a single tunable system is presented. Based on an analysis of existing experiments it is shown that, contrary to a 'common sense', a nonmagnetic semiconductor is capable of playing an important role in controlling ferromagnetism. Magnetic properties of a hybrid (the hysteresis loop and the spatial orientation of magnetization) can be tuned both optically and electrically by utilizing semiconductor—making the hybrid an electronic-write-in and electronic-read-out elementary storage unit.

The Methodology of Magpies

Science.gov (United States)

Carter, Susan

2014-01-01

Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

A combined reaction class approach with integrated molecular orbital+molecular orbital (IMOMO) methodology: A practical tool for kinetic modeling

International Nuclear Information System (INIS)

Truong, Thanh N.; Maity, Dilip K.; Truong, Thanh-Thai T.

2000-01-01

We present a new practical computational methodology for predicting thermal rate constants of reactions involving large molecules or a large number of elementary reactions in the same class. This methodology combines the integrated molecular orbital+molecular orbital (IMOMO) approach with our recently proposed reaction class models for tunneling. With the new methodology, we show that it is possible to significantly reduce the computational cost by several orders of magnitude while compromising the accuracy in the predicted rate constants by less than 40% over a wide range of temperatures. Another important result is that the computational cost increases only slightly as the system size increases. (c) 2000 American Institute of Physics

Approaches for the Assessment of the Innovative Nuclear System of Ukraine on the Base of INPRO Methodology

International Nuclear Information System (INIS)

Afanas'ev, A.A.; Vlasenko, N.I.

2007-01-01

Approaches for the preliminary and comparative assessment of Innovative Nuclear System (INS) of Ukraine using INPRO methodology (IAEA TECDOC-1434) suggested for the period up to 2030, which must answer the comprehensive purpose of sustainable development, contribute to strengthening of the non-proliferation principles and solving an energy problems supply on national and regional levels are presented in the paper. Using assessment results of the INS based on evolutionary designs will allow Ukraine to build informative, methodological and technical basis for choice of the INS based on innovative design which could be offered for deployment in Ukraine after 1030

The principles of electronic and electromechanic power conversion a systems approach

CERN Document Server

Ferreira, Braham

2013-01-01

Teaching the principles of power electronics and electromechanical power conversion through a unique top down systems approach, The Principles of Electromechanical Power Conversion takes the role and system context of power conversion functions as the starting point. Following this approach, the text defines the building blocks of the system and describes the theory of how they exchange power with each other. The authors introduce a modern, simple approach to machines, which makes the principles of field oriented control and space vector theory approachable to undergraduate students as well as

Electronic health records and disease registries to support integrated care in a health neighbourhood: an ontology-based methodology.

Science.gov (United States)

Liaw, Siaw-Teng; Taggart, Jane; Yu, Hairong; Rahimi, Alireza

2014-01-01

Disease registries derived from Electronic Health Records (EHRs) are widely used for chronic disease management (CDM). However, unlike national registries which are specialised data collections, they are usually specific to an EHR or organization such as a medical home. We approached registries from the perspective of integrated care in a health neighbourhood, considering data quality issues such as semantic interoperability (consistency), accuracy, completeness and duplication. Our proposition is that a realist ontological approach is required to systematically and accurately identify patients in an EHR or data repository of EHRs, assess intrinsic data quality and fitness for use by members of the multidisciplinary integrated care team. We report on this approach as applied to routinely collected data in an electronic practice based research network in Australia.

Visualized attribute analysis approach for characterization and quantification of rice taste flavor using electronic tongue

Energy Technology Data Exchange (ETDEWEB)

Lu, Lin; Hu, Xianqiao [Rice Product Quality Supervision and Inspection Center, Ministry of Agriculture, China National Rice Research Institute, Hangzhou 310006 (China); Tian, Shiyi; Deng, Shaoping [College of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou 310035 (China); Zhu, Zhiwei, E-mail: 615834652@qq.com [Rice Product Quality Supervision and Inspection Center, Ministry of Agriculture, China National Rice Research Institute, Hangzhou 310006 (China)

2016-05-05

This paper deals with a novel visualized attributive analysis approach for characterization and quantification of rice taste flavor attributes (softness, stickiness, sweetness and aroma) employing a multifrequency large-amplitude pulse voltammetric electronic tongue. Data preprocessing methods including Principal Component Analysis (PCA) and Fast Fourier Transform (FFT) were provided. An attribute characterization graph was represented for visualization of the interactive response in which each attribute responded by specific electrodes and frequencies. The model was trained using signal data from electronic tongue and attribute scores from artificial evaluation. The correlation coefficients for all attributes were over 0.9, resulting in good predictive ability of attributive analysis model preprocessed by FFT. This approach extracted more effective information about linear relationship between electronic tongue and taste flavor attribute. Results indicated that this approach can accurately quantify taste flavor attributes, and can be an efficient tool for data processing in a voltammetric electronic tongue system. - Graphical abstract: Schematic process for visualized attributive analysis approach using multifrequency large-amplitude pulse voltammetric electronic tongue for determination of rice taste flavor attribute. (a) sample; (b) sensors in electronic tongue; (c) excitation voltage program and response current signal from MLAPS; (d) similarity data matrix by data preprocessing and similarity extraction; (e) feature data matrix of attribute; (f) attribute characterization graph; (g) attribute scores predicted by the model. - Highlights: • Multifrequency large-amplitude pulse voltammetric electronic tongue was used. • A visualized attributive analysis approach was created as an efficient tool for data processing. • Rice taste flavor attribute was determined and predicted. • The attribute characterization graph was represented for visualization of the

Broadening the Study of Participation in the Life Sciences: How Critical Theoretical and Mixed-Methodological Approaches Can Enhance Efforts to Broaden Participation

Science.gov (United States)

Metcalf, Heather

2016-01-01

This research methods Essay details the usefulness of critical theoretical frameworks and critical mixed-methodological approaches for life sciences education research on broadening participation in the life sciences. First, I draw on multidisciplinary research to discuss critical theory and methodologies. Then, I demonstrate the benefits of these…

Multiple scattering approach to the vibrational excitation of molecules by slow electrons

International Nuclear Information System (INIS)

Drukarev, G.

1976-01-01

Another approach to the problem of vibrational excitation of homonuclear two-atomic molecules by slow electrons possibly accompanied by rotational transitions is presented based on the picture of multiple scattering of an electron inside the molecule. The scattering of two fixed centers in the zero range potential model is considered. The results indicate that the multiple scattering determines the order of magnitude of the vibrational excitation cross sections in the energy region under consideration even if the zero range potential model is used. Also the connection between the multiple scattering approach and quasi-stationary molecular ion picture is established. 9 refs

Towards a Methodology for Managing Competencies in Virtual Teams - A Systemic Approach

Science.gov (United States)

Schumacher, Marinita; Stal-Le Cardinal, Julie; Bocquet, Jean-Claude

Virtual instruments and tools are future trends in Engineering which are a response to the growing complexity of engineering tasks, the facility of communication and strong collaborations on the international market. Outsourcing, off-shoring, and the globalization of organisations’ activities have resulted in the formation of virtual product development teams. Individuals who are working in virtual teams must be equipped with diversified competencies that provide a basis for virtual team building. Thanks to the systemic approach of the functional analysis our paper responds to the need of a methodology of competence management to build virtual teams that are active in virtual design projects in the area of New Product Development (NPD).

Development of a methodology for deriving Plasmaspheric Total Electron Content from In-Situ electron density measurements in highly eccentric equatorial orbits

Science.gov (United States)

Sadhique, Aliyuthuman; Buckley, Andrew; Gough, Paul; Sussex Space Science Centre Team

2017-10-01

The contribution of the Upper Plasmasphere (defined as the altitudes above semi-synchronous orbit height to the Plasmapause height) to the TEC has been and continues to be un-quantified. The PEACE instrument in the Chinese - ESA Double Star TC1 satellite, the mission's orbit's high eccentricity, low perigee, high apogee and the resulting smaller incident angle while in the above altitude range provide the ideal geometric opportunity to build a methodology and to utilize its empirical in-situ electron density measurements to determine the Upper Plasmaspheric TEC component. Furthermore, the variation of the Inclination Angle of TC1 makes it a suitable equatorial mission confined to the Near-Equatorial region, ie 200 - 250 on either sides of the magnetic equator. As the most pronounced absolute TEC values and variations are within this region, it offers an excellent opportunity to build a Upper Plasmaspheric TEC database. This research generates such, first-ever database along its orbital path, using a methodology of approximation equating arcs of the orbits to straight-line TEC Bars, utilizing complex mathematics, also enabling the determination of the whole Plasmaspheric TEC from any eccentric orbital probe. Presented the paper in 15th International Workshop on Technical and Scientific Aspects of MST radar (MST15/iMST2)'' and ``18th EISCAT Symposium (EISCAT18)'' in Tokyo, Japan and The Royal Astronomical Society National Astronomy Meeting 2017.

Connecting the East and the West, the Local and the Universal: The Methodological Elements of a Transcultural Approach to Bioethics.

Science.gov (United States)

Nie, Jing-Bao; Fitzgerald, Ruth P

From the outset, cross-cultural and transglobal bioethics has constituted a potent arena for a dynamic public discourse and academic debate alike. But prominent bioethical debates on such issues as the notion of common morality and a distinctive "Asian" bioethics in contrast to a "Western" one reveal some deeply rooted and still popular but seriously problematic methodological habits in approaching cultural differences, most notably, radically dichotomizing the East and the West, the local and the universal. In this paper, a "transcultural" approach to bioethics and cultural studies is proposed. It takes seriously the challenges offered by social sciences, anthropology in particular, towards the development of new methodologies for comparative and global bioethics. The key methodological elements of "transculturalism" include acknowledging the great internal plurality within every culture; highlighting the complexity of cultural differences; upholding the primacy of morality; incorporating a reflexive theory of social power; and promoting changes or progress towards shared and sometimes new moral values.

Methodologies, languages and tools

International Nuclear Information System (INIS)

Amako, Katsuya

1994-01-01

This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

A multiple kernel classification approach based on a Quadratic Successive Geometric Segmentation methodology with a fault diagnosis case.

Science.gov (United States)

Honório, Leonardo M; Barbosa, Daniele A; Oliveira, Edimar J; Garcia, Paulo A Nepomuceno; Santos, Murillo F

2018-03-01

This work presents a new approach for solving classification and learning problems. The Successive Geometric Segmentation technique is applied to encapsulate large datasets by using a series of Oriented Bounding Hyper Box (OBHBs). Each OBHB is obtained through linear separation analysis and each one represents a specific region in a pattern's solution space. Also, each OBHB can be seen as a data abstraction layer and be considered as an individual Kernel. Thus, it is possible by applying a quadratic discriminant function, to assemble a set of nonlinear surfaces separating each desirable pattern. This approach allows working with large datasets using high speed linear analysis tools and yet providing a very accurate non-linear classifier as final result. The methodology was tested using the UCI Machine Learning repository and a Power Transformer Fault Diagnosis real scenario problem. The results were compared with different approaches provided by literature and, finally, the potential and further applications of the methodology were also discussed. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

E-Waste and the Sustainable Organisation: Griffith University's Approach to E-Waste

Science.gov (United States)

Davis, Georgina; Wolski, Malcolm

2009-01-01

Purpose: This paper seeks to provide details of Griffith University's (GU) approach for sustainably dealing with electronic waste (e-waste) and the benefits of using the e-waste programme as a valuable educational case study for ESD. Design/methodology/approach: The e-waste programme is explained with reference to key resources and literature, so…

Exploring Participatory Methodologies in Organizational Discourse Analysis

DEFF Research Database (Denmark)

Plotnikof, Mie

2014-01-01

Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new contribu......Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new...... contributions. As regards conceptual efforts are made but further exploration of methodological combinations and their practical implications are called for. This paper argues 1) to combine methodologies by approaching this as scholarly subjectification processes, and 2) to perform combinations in both...

Electron momentum spectroscopy of dimethyl ether taking account of nuclear dynamics in the electronic ground state

International Nuclear Information System (INIS)

Morini, Filippo; Deleuze, Michael Simon; Watanabe, Noboru; Kojima, Masataka; Takahashi, Masahiko

2015-01-01

The influence of nuclear dynamics in the electronic ground state on the (e,2e) momentum profiles of dimethyl ether has been analyzed using the harmonic analytical quantum mechanical and Born-Oppenheimer molecular dynamics approaches. In spite of fundamental methodological differences, results obtained with both approaches consistently demonstrate that molecular vibrations in the electronic ground state have a most appreciable influence on the momentum profiles associated to the 2b 1 , 6a 1 , 4b 2 , and 1a 2 orbitals. Taking this influence into account considerably improves the agreement between theoretical and newly obtained experimental momentum profiles, with improved statistical accuracy. Both approaches point out in particular the most appreciable role which is played by a few specific molecular vibrations of A 1 , B 1 , and B 2 symmetries, which correspond to C–H stretching and H–C–H bending modes. In line with the Herzberg-Teller principle, the influence of these molecular vibrations on the computed momentum profiles can be unraveled from considerations on the symmetry characteristics of orbitals and their energy spacing

Quantum Geometry: Relativistic energy approach to cooperative electron-nucleary-transition spectrum

Directory of Open Access Journals (Sweden)

Ольга Юрьевна Хецелиус

2014-11-01

Full Text Available An advanced relativistic energy approach is presented and applied to calculating parameters of electron-nuclear 7-transition spectra of nucleus in the atom. The intensities of the spectral satellites are defined in the relativistic version of the energy approach (S-matrix formalism, and gauge-invariant quantum-electrodynamical perturbation theory with the Dirac-Kohn-Sham density-functional zeroth approximation.

Materials and processing approaches for foundry-compatible transient electronics

Science.gov (United States)

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A.; Song, Enming; Yu, Xinge; Rogers, John A.

2017-07-01

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for “green” electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are (i) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, (ii) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and (iii) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries.

Experimental Economics: Some Methodological Notes

OpenAIRE

Fiore, Annamaria

2009-01-01

The aim of this work is presenting in a self-contained paper some methodological aspects as they are received in the current experimental literature. The purpose has been to make a critical review of some very influential papers dealing with methodological issues. In other words, the idea is to have a single paper where people first approaching experimental economics can find summarised (some) of the most important methodological issues. In particular, the focus is on some methodological prac...

Nucleon-nucleon interactions via Lattice QCD: Methodology. HAL QCD approach to extract hadronic interactions in lattice QCD

Science.gov (United States)

Aoki, Sinya

2013-07-01

We review the potential method in lattice QCD, which has recently been proposed to extract nucleon-nucleon interactions via numerical simulations. We focus on the methodology of this approach by emphasizing the strategy of the potential method, the theoretical foundation behind it, and special numerical techniques. We compare the potential method with the standard finite volume method in lattice QCD, in order to make pros and cons of the approach clear. We also present several numerical results for nucleon-nucleon potentials.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review.

Science.gov (United States)

Nagels, Steven; Deferme, Wim

2018-03-03

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review

Directory of Open Access Journals (Sweden)

Steven Nagels

2018-03-01

Full Text Available Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application.

Photovoltaic module energy rating methodology development

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

1996-05-01

A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

An electronic edition of eighteenth-century drama: the materiality of editing in performance

Directory of Open Access Journals (Sweden)

Pinto, Isabel

2016-07-01

Full Text Available In the domain of electronic edition, drama’s specificity has been considered in terms of metadata improvements and possibilities. At the same time, an increasing closeness between art history research and performance art has demonstrated its methodological value to assess the complex nature of the archive. My post-doctoral research follows the lead and goes as far as proposing that performance art can be an adequate methodology when preparing the electronic edition of eighteenth-century drama. Furthermore, “performing the archive” can help to fill the gap between the eventful nature of drama manuscripts and the audience of today, suggesting new ways of approaching the specific materiality of the plays.

Menopause and Methodological Doubt

Science.gov (United States)

Spence, Sheila

2005-01-01

Menopause and methodological doubt begins by making a tongue-in-cheek comparison between Descartes' methodological doubt and the self-doubt that can arise around menopause. A hermeneutic approach is taken in which Cartesian dualism and its implications for the way women are viewed in society are examined, both through the experiences of women…

Tailoring electronic structure of polyazomethines thin films

OpenAIRE

J. Weszka; B. Hajduk; M. Domański; M. Chwastek; J. Jurusik; B. Jarząbek; H. Bednarski; P. Jarka

2010-01-01

Purpose: The aim of this work is to show how electronic properties of polyazomethine thin films deposited by chemical vapor deposition method (CVD) can be tailored by manipulating technological parameters of pristine films preparation as well as modifying them while the as-prepared films put into iodine atmosphere.Design/methodology/approach: The recent achievements in the field of designing and preparation methods to be used while preparing polymer photovoltaic solar cells or optoelectronic ...

Parameter-free driven Liouville-von Neumann approach for time-dependent electronic transport simulations in open quantum systems

DEFF Research Database (Denmark)

Zelovich, Tamar; Hansen, Thorsten; Liu, Fulai

2017-01-01

in the original methodology, is replaced by a set of state-dependent broadening factors applied to the different single-particle lead levels. These broadening factors are extracted explicitly from the self-energy of the corresponding electronic reservoir and are fully transferable to any junction incorporating...... the same lead model. The performance of the method is demonstrated via tight-binding and extended Hückel calculations of simple junction models. Our analytic considerations and numerical results indicate that the developed methodology constitutes a rigorous framework for the design of "black-box...

Modeling Electronic Circular Dichroism within the Polarizable Embedding Approach

DEFF Research Database (Denmark)

Nørby, Morten S; Olsen, Jógvan Magnus Haugaard; Steinmann, Casper

2017-01-01

We present a systematic investigation of the key components needed to model single chromophore electronic circular dichroism (ECD) within the polarizable embedding (PE) approach. By relying on accurate forms of the embedding potential, where especially the inclusion of local field effects...... are in focus, we show that qualitative agreement between rotatory strength parameters calculated by full quantum mechanical calculations and the more efficient embedding calculations can be obtained. An important aspect in the computation of reliable absorption parameters is the need for conformational...... sampling. We show that a significant number of snapshots are needed to avoid artifacts in the calculated electronic circular dichroism parameters due to insufficient configurational sampling, thus highlighting the efficiency of the PE model....

THEORETICAL AND METHODOLOGICAL APPROACHES TO THE STUDY OF THE IMPACT OF INFORMATION TECHNOLOGY ON SOCIAL CONNECTIONS AMONG YOUTH

Directory of Open Access Journals (Sweden)

Sofia Alexandrovna Zverkova

2015-11-01

Full Text Available The urgency is due to the virtualization of communication in modern society, especially among young people, affecting social relations and social support services. Stressed the need for a more in-depth study of network virtualization of social relations of society, due to the ambiguous consequences of this phenomenon among the youth.Purpose. Analyze classic and contemporary theoretical and methodological approaches to the study of social ties and social support in terms of technological progress.Results. The article presents a sociological analysis of theoretical and methodological approaches to the study of problems of interaction and social support among youth through strong and weak social ties in cyberspace and in the real world.Practical implications. The analysis gives the opportunity for a wide range of examining social relations in various fields of sociology, such as sociology of youth, sociology of communications.

A problem-based approach to teaching research methodology to medical graduates in Iran

Directory of Open Access Journals (Sweden)

Mehrdad Jalalian Hosseini

2009-08-01

Full Text Available Physicians are reticent to participate in research projects for avariety of reasons. Facilitating the active involvement ofdoctors in research projects is a high priority for the IranianBlood Transfusion Organization (IBTO. A one-month trainingcourse on research methodology was conducted for a groupof physicians in Mashhad, in northeast Iran. The participantswere divided in ten groups. They prepared a researchproposal under the guidance of a workshop leader. Thequality of the research proposals, which were prepared by allparticipants, went beyond our expectations. All of theresearch proposals were relevant to blood safety. In this briefreport we describe our approach.

Introducing an ILS methodology into research reactors

International Nuclear Information System (INIS)

Lorenzo, N. de; Borsani, R.C.

2003-01-01

subsequent design stages. Staff should be allocated to operate the system after assessments based on the workload and safety issues. A methodology for a Plant Tasks Analysis (used as the input for a Manning Analysis Assessment) to define a cost-effective organisational structure is presented. Training is a key issue to support a well-designed plant. This paper describes general training aspects to be considered in the ILS approach. General considerations to tailor a Training Plan are presented as well as for developing training tools such as Plant Simulators and 3D Electronic Models. Manuals, procedures and instructions (relevant for system operation and maintenance) are generally developed by designers or operators focussing on technical characteristics rather than considering the documentation framework and training needs. Methodology and general recommendations regarding documents structure and scope to achieve world class plant documents are also presented. Plant Maintenance should be consistent with in house capabilities regarding the appropriate Level of Repair of each plant item. Reliability, Availability, Maintainability and Supportability assessment methodology is presented in order to focus maintenance activities on relevant issues. Spare parts management is a critical issue and hence is also included in this logistical approach. References regarding optimisation of these and related issues are included. All the mentioned factors are optimally integrated from the beginning of the process application in order to achieve the major outcomes with the available resources. (author)

Electronic resource management systems a workflow approach

CERN Document Server

Anderson, Elsa K

2014-01-01

To get to the bottom of a successful approach to Electronic Resource Management (ERM), Anderson interviewed staff at 11 institutions about their ERM implementations. Among her conclusions, presented in this issue of Library Technology Reports, is that grasping the intricacies of your workflow-analyzing each step to reveal the gaps and problems-at the beginning is crucial to selecting and implementing an ERM. Whether the system will be used to fill a gap, aggregate critical data, or replace a tedious manual process, the best solution for your library depends on factors such as your current soft

A Methodological Demonstration of Set-theoretical Approach to Social Media Maturity Models Using Necessary Condition Analysis

DEFF Research Database (Denmark)

Lasrado, Lester Allan; Vatrapu, Ravi; Andersen, Kim Normann

2016-01-01

Despite being widely accepted and applied across research domains, maturity models have been criticized for lacking academic rigor, especially methodologically rigorous and empirically grounded or tested maturity models are quite rare. Attempting to close this gap, we adopt a set-theoretic approach...... and evaluate some of arguments presented by previous conceptual focused social media maturity models....... by applying the Necessary Condition Analysis (NCA) technique to derive maturity stages and stage boundaries conditions. The ontology is to view stages (boundaries) in maturity models as a collection of necessary condition. Using social media maturity data, we demonstrate the strength of our approach...

Convergence of IFRS and US GAAP in the field of lease: the impact of new methodological approaches for operating lease reporting

Directory of Open Access Journals (Sweden)

Patrik Svoboda

2012-01-01

Full Text Available Since 2002 the International Accounting Standards Board (IASB and the Financial Accounting Standards Board (FASB has begun significantly cooperate in the creation of standards based on the same principals. This is a process of convergence. It is realized through a series of sub-projects aimed at short-term or long-term period. Revenue recognition and lease reporting projects represent priority areas of convergence. The issue of leases belongs to one of the areas in which there have been, after a relatively long time, criticized the very principles applied in international accounting standards. The result of the convergence activities should be the creation of such methodological approaches of reporting the lease contracts on the side of lessee and then lessor that would eliminate the main weaknesses of the current system of reporting based on the classification of lease contracts in connection with the execution or non execution of the transfer of risks and benefits associated with the lease to the lessee. The aim of this paper is to evaluate the impact of implementation of the newly proposed methodological approach for lease reporting in the field of operating leases into the financial statements that will be affected by this change of methodology (balance sheet, income statement. Subsequently, it is evaluated also the impact into selected indicators of financial analysis with a focus on indicators, in whose construction are used items of statements that are significantly affected by the change of the methodological approach.

A MAUT APPROACH FOR REUSING DOMAIN ONTOLOGIES ON THE BASIS OF THE NeOn METHODOLOGY

OpenAIRE

A. JIMÉNEZ; M. C. SUÁREZ-FIGUEROA; A. MATEOS; A. GÓMEZ-PÉREZ; M. FERNÁNDEZ-LÓPEZ

2013-01-01

Knowledge resource reuse is becoming a widespread approach in the ontology engineering field because it can speed up the ontology development process. In this context, the NeOn Methodology specifies some guidelines for reusing different types of knowledge resources (ontologies, nonontological resources, and ontology design patterns). These guidelines prescribe how to perform the different activities involved in any of the diverse types of reuse processes. One such activity is to select the be...

Attitudes of Korean adults towards human dignity: a Q methodology approach.

Science.gov (United States)

Jo, Kae Hwa; An, Gyeong-Ju; Doorenbos, Ardith Z

2012-06-01

The aim of this study was to identify the perceived attitudes of Korean adults towards human dignity in order to determine the relationship of human dignity to its social and cultural background. The Q methodology research technique was used to explore perceived attitude typology on the basis of the respondents' ranking order for different statements. A convenience sampling method was used to select 40 Korean adults who were interested in human dignity to create statements. From the questionnaires, in-depth interviews, and a literature review, a total of 158 statements was obtained. The final 34 Q samples were selected from a review by two nursing professors and a Q methodology expert. Moreover, 38 respondents participated as P samples by sorting 34 Q statements on a nine-point normal distribution scale. The data were analyzed by using the QUANL software package. The following four types of attitudes about human dignity were identified in Korea: a happiness-oriented-self-pursuit type, relationship-oriented-self-recognition type, reflection-oriented-self-unification type, and discrimination-oriented-self-maintenance type. The results indicate that approaches to developing human dignity education need to take this typology into account and the characteristics of the participants who fall into each category. These results provide general guidelines to understand Korean values for professional practice in various healthcare settings. © 2011 The Authors. Japan Journal of Nursing Science © 2011 Japan Academy of Nursing Science.

A Graphical, Self-Organizing Approach to Classifying Electronic Meeting Output.

Science.gov (United States)

Orwig, Richard E.; Chen, Hsinchun; Nunamaker, Jay F., Jr.

1997-01-01

Describes research using an artificial intelligence approach in the application of a Kohonen Self-Organizing Map (SOM) to the problem of classification of electronic brainstorming output and an evaluation of the results. The graphical representation of textual data produced by the Kohonen SOM suggests many opportunities for improving information…

Zeroth order regular approximation approach to electric dipole moment interactions of the electron

Science.gov (United States)

Gaul, Konstantin; Berger, Robert

2017-07-01

A quasi-relativistic two-component approach for an efficient calculation of P ,T -odd interactions caused by a permanent electric dipole moment of the electron (eEDM) is presented. The approach uses a (two-component) complex generalized Hartree-Fock and a complex generalized Kohn-Sham scheme within the zeroth order regular approximation. In applications to select heavy-elemental polar diatomic molecular radicals, which are promising candidates for an eEDM experiment, the method is compared to relativistic four-component electron-correlation calculations and confirms values for the effective electric field acting on the unpaired electron for RaF, BaF, YbF, and HgF. The calculations show that purely relativistic effects, involving only the lower component of the Dirac bi-spinor, are well described by treating only the upper component explicitly.

Quantifying Domestic Used Electronics Flows using a Combination of Material Flow Methodologies: A US Case Study.

Science.gov (United States)

Miller, T Reed; Duan, Huabo; Gregory, Jeremy; Kahhat, Ramzy; Kirchain, Randolph

2016-06-07

This paper describes the scope, methods, data, and results of a comprehensive quantitative analysis of generation, stock, and collection of used computers and monitors in the United States , specifically desktops, laptops, CRT monitors, and flat panel monitors in the decade leading up to 2010. Generation refers to used electronics coming directly out of use or postuse storage destined for disposal or collection, which encompasses a variety of organizations gathering used electronics for recycling or reuse. Given the lack of actual statistics on flows of used electronics, two separate approaches, the sales obsolescence method (SOM) and the survey scale-up method (SSUM), were used in order to compare the results attained and provide a range for estimated quantities. This study intentionally sought to capture the uncertainty in the estimates. To do so, uncertainty in each data set was incorporated at each stage using Monte Carlo simulations for SOM and establishing scenarios for SSUM. Considering the average results across both methods, we estimate that in 2010 the U.S. generated 130-164 thousand metric tons of used computers and 128-153 thousand tons of used monitors, of which 110-116 thousand tons of used computers and 105-106 thousand tons of used monitors were collected for further reuse, recycling, or export. While each approach has its strengths and weaknesses, both the SOM and the SSUM appear to be capable of producing reasonable ranges of estimates for the generation and collection of used electronics.

Diode laser absorption spectroscopy for process control: Sensor system design methodology

International Nuclear Information System (INIS)

Berzins, L.V.; Anklam, T.M.; Chambers, F.; Galanti, S.; Haynam, C.A.; Worden, E.F.

1995-03-01

A laser absorption spectroscopy (LAS) system has been developed at Lawrence Livermore National Laboratory (LLNL) for process control. LAS has proven itself to be an accurate and reliable method to monitor both density and composition. In this paper the important features and components of an industrial LAS diagnostic are described. Application of this approach to vaporization processes requires careful selection of the species and transitions to be monitored The relative vapor pressure, hyperfine structure, isotopic frequency shifts, and electronic temperature all effect the selection of a particular transition. In this paper we describe the methodology for choosing the optimal transition or transitions. Coevaporation of a titanium-niobium alloy is used to illustrate the methodology. In a related paper, T.M. Anklam et al describe the application of this diagnostic to monitoring and controlling composition in a physical vapor deposition process of industrial interest

Application of the Spanish methodological approach for biosphere assessment to a generic high-level waste disposal site

International Nuclear Information System (INIS)

Agueero, A.; Pinedo, P.; Simon, I.; Cancio, D.; Moraleda, M.; Trueba, C.; Perez-Sanchez, D.

2008-01-01

A methodological approach which includes conceptual developments, methodological aspects and software tools have been developed in the Spanish context, based on the BIOMASS 'Reference Biospheres Methodology'. The biosphere assessments have to be undertaken with the aim of demonstrating compliance with principles and regulations established to limit the possible radiological impact of radioactive waste disposals on human health and on the environment, and to ensure that future generations will not be exposed to higher radiation levels than those that would be acceptable today. The biosphere in the context of high-level waste disposal is defined as the collection of various radionuclide transfer pathways that may result in releases into the surface environment, transport within and between the biosphere receptors, exposure of humans and biota, and the doses/risks associated with such exposures. The assessments need to take into account the complexity of the biosphere, the nature of the radionuclides released and the long timescales considered. It is also necessary to make assumptions related to the habits and lifestyle of the exposed population, human activities in the long term and possible modifications of the biosphere. A summary on the Spanish methodological approach for biosphere assessment are presented here as well as its application in a Spanish generic case study. A reference scenario has been developed based on current conditions at a site located in Central-West Spain, to indicate the potential impact to the actual population. In addition, environmental change has been considered qualitatively through the use of interaction matrices and transition diagrams. Unit source terms of 36 Cl, 79 Se, 99 Tc, 129 I, 135 Cs, 226 Ra, 231 Pa, 238 U, 237 Np and 239 Pu have been taken. Two exposure groups of infants and adults have been chosen for dose calculations. Results are presented and their robustness is evaluated through the use of uncertainty and sensitivity

Application of the Spanish methodological approach for biosphere assessment to a generic high-level waste disposal site.

Science.gov (United States)

Agüero, A; Pinedo, P; Simón, I; Cancio, D; Moraleda, M; Trueba, C; Pérez-Sánchez, D

2008-09-15

A methodological approach which includes conceptual developments, methodological aspects and software tools have been developed in the Spanish context, based on the BIOMASS "Reference Biospheres Methodology". The biosphere assessments have to be undertaken with the aim of demonstrating compliance with principles and regulations established to limit the possible radiological impact of radioactive waste disposals on human health and on the environment, and to ensure that future generations will not be exposed to higher radiation levels than those that would be acceptable today. The biosphere in the context of high-level waste disposal is defined as the collection of various radionuclide transfer pathways that may result in releases into the surface environment, transport within and between the biosphere receptors, exposure of humans and biota, and the doses/risks associated with such exposures. The assessments need to take into account the complexity of the biosphere, the nature of the radionuclides released and the long timescales considered. It is also necessary to make assumptions related to the habits and lifestyle of the exposed population, human activities in the long term and possible modifications of the biosphere. A summary on the Spanish methodological approach for biosphere assessment are presented here as well as its application in a Spanish generic case study. A reference scenario has been developed based on current conditions at a site located in Central-West Spain, to indicate the potential impact to the actual population. In addition, environmental change has been considered qualitatively through the use of interaction matrices and transition diagrams. Unit source terms of (36)Cl, (79)Se, (99)Tc, (129)I, (135)Cs, (226)Ra, (231)Pa, (238)U, (237)Np and (239)Pu have been taken. Two exposure groups of infants and adults have been chosen for dose calculations. Results are presented and their robustness is evaluated through the use of uncertainty and

Noncovalent Intermolecular Interactions in Organic Electronic Materials: Implications for the Molecular Packing vs Electronic Properties of Acenes

KAUST Repository

Sutton, Christopher

2015-10-30

Noncovalent intermolecular interactions, which can be tuned through the toolbox of synthetic chemistry, determine not only the molecular packing but also the resulting electronic, optical, and mechanical properties of materials derived from π-conjugated molecules, oligomers, and polymers. Here, we provide an overview of the theoretical underpinnings of noncovalent intermolecular interactions and briefly discuss the computational chemistry approaches used to understand the magnitude of these interactions. These methodologies are then exploited to illustrate how noncovalent intermolecular interactions impact important electronic properties-such as the electronic coupling between adjacent molecules, a key parameter for charge-carrier transport-through a comparison between the prototype organic semiconductor pentacene with a series of N-substituted heteropentacenes. Incorporating an understanding of these interactions into the design of organic semiconductors can assist in developing novel materials systems from this fascinating molecular class. © 2015 American Chemical Society.

Methodological Approach Into Researching Traffic Under Extraordinary Security Circumstances

Directory of Open Access Journals (Sweden)

Peter-Anthony Ercegovac

2008-09-01

Full Text Available The complexity of researching traffic under extraordinaryconditions in order to implement a more efficient and functionaltraffic management strategy under both normal and irregularconditions- as well as the grey zone of when the changefrom normal into extraordinary traffic conditions actually occur-provides the researcher with numerous methodologicalproblems.Starting from the viewpoint that the field of traffic scienceneeds an increase into the capacity of research into traffic underextraordinary conditions we have chosen to define withinthis article a specific methodological approach that undertakesa study into the exposure, menace, threat and risk faced by trafficsystems under extraordinary conditions through utilisingmethods utilised by the military that allow for the possible resolutionof such problems through compatible testing of both simulatedand real life conditions that such systems may face.In searching for possible applicable solutions to such demandingparametres we believe that the use of concrete informationin real time and real space in order to bring about amore efficient functioning of traffic under extraordinary conditionscan be achieved through the use of the analytical capacityof traffic systems information gathering attained through theusage of Uninhabited Flying Vehicles (UFVs in monitoringroad, rail and maritime traffic and transport.

Electronic excitation of atoms and molecules by electron impact in a linear algebraic, separable potential approach

International Nuclear Information System (INIS)

Collins, L.A.; Schneider, B.I.

1984-01-01

The linear algebraic, separable potential approach is applied to the electronic excitation of atoms and molecules by electron impact. By representing the exchange and off-diagonal direct terms on a basis, the standard set of coupled inelastic equations is reduced to a set of elastic inhomogeneous equations. The procedure greatly simplifies the formulation by allowing a large portion of the problem to be handled by standard bound-state techniques and by greatly reducing the order of the scattering equations that must be solved. Application is made to the excitation of atomic hydrogen in the three-state close-coupling (1s, 2s, 2p) approximation. (author)

A novel system architecture for the national integration of electronic health records: a semi-centralized approach.

Science.gov (United States)

AlJarullah, Asma; El-Masri, Samir

2013-08-01

The goal of a national electronic health records integration system is to aggregate electronic health records concerning a particular patient at different healthcare providers' systems to provide a complete medical history of the patient. It holds the promise to address the two most crucial challenges to the healthcare systems: improving healthcare quality and controlling costs. Typical approaches for the national integration of electronic health records are a centralized architecture and a distributed architecture. This paper proposes a new approach for the national integration of electronic health records, the semi-centralized approach, an intermediate solution between the centralized architecture and the distributed architecture that has the benefits of both approaches. The semi-centralized approach is provided with a clearly defined architecture. The main data elements needed by the system are defined and the main system modules that are necessary to achieve an effective and efficient functionality of the system are designed. Best practices and essential requirements are central to the evolution of the proposed architecture. The proposed architecture will provide the basis for designing the simplest and the most effective systems to integrate electronic health records on a nation-wide basis that maintain integrity and consistency across locations, time and systems, and that meet the challenges of interoperability, security, privacy, maintainability, mobility, availability, scalability, and load balancing.

Methodological Aspects of Strategic Development of Regional Socio-Economic System (Following the Example of Radio-Electronic Industry Enterprises in the Republic of Tatarstan)

Science.gov (United States)

Uraev, Nikolay N.; Mingaleev, Gaziz F.; Kushimov, Aleksandr T.; Kolesov, Nikolay A.

2016-01-01

This paper considers the methodological aspects of forming a development strategy for the regional socioeconomic system (by the example of radio-electronic enterprises in the Republic of Tatarstan). The paper suggests a conceptual scheme of the macro- and micro-factors' influence on the regional socioeconomic system. This scheme is based on the…

Building a house on shifting sand: methodological considerations when evaluating the implementation and adoption of national electronic health record systems

Directory of Open Access Journals (Sweden)

Takian Amirhossein

2012-04-01

Full Text Available Abstract Background A commitment to Electronic Health Record (EHR systems now constitutes a core part of many governments’ healthcare reform strategies. The resulting politically-initiated large-scale or national EHR endeavors are challenging because of their ambitious agendas of change, the scale of resources needed to make them work, the (relatively short timescales set, and the large number of stakeholders involved, all of whom pursue somewhat different interests. These initiatives need to be evaluated to establish if they improve care and represent value for money. Methods Critical reflections on these complexities in the light of experience of undertaking the first national, longitudinal, and sociotechnical evaluation of the implementation and adoption of England’s National Health Service’s Care Records Service (NHS CRS. Results/discussion We advance two key arguments. First, national programs for EHR implementations are likely to take place in the shifting sands of evolving sociopolitical and sociotechnical and contexts, which are likely to shape them in significant ways. This poses challenges to conventional evaluation approaches which draw on a model of baseline operations → intervention → changed operations (outcome. Second, evaluation of such programs must account for this changing context by adapting to it. This requires careful and creative choice of ontological, epistemological and methodological assumptions. Summary New and significant challenges are faced in evaluating national EHR implementation endeavors. Based on experiences from this national evaluation of the implementation and adoption of the NHS CRS in England, we argue for an approach to these evaluations which moves away from seeing EHR systems as Information and Communication Technologies (ICT projects requiring an essentially outcome-centred assessment towards a more interpretive approach that reflects the situated and evolving nature of EHR seen within

Building a house on shifting sand: methodological considerations when evaluating the implementation and adoption of national electronic health record systems.

Science.gov (United States)

Takian, Amirhossein; Petrakaki, Dimitra; Cornford, Tony; Sheikh, Aziz; Barber, Nicholas

2012-04-30

A commitment to Electronic Health Record (EHR) systems now constitutes a core part of many governments' healthcare reform strategies. The resulting politically-initiated large-scale or national EHR endeavors are challenging because of their ambitious agendas of change, the scale of resources needed to make them work, the (relatively) short timescales set, and the large number of stakeholders involved, all of whom pursue somewhat different interests. These initiatives need to be evaluated to establish if they improve care and represent value for money. Critical reflections on these complexities in the light of experience of undertaking the first national, longitudinal, and sociotechnical evaluation of the implementation and adoption of England's National Health Service's Care Records Service (NHS CRS). We advance two key arguments. First, national programs for EHR implementations are likely to take place in the shifting sands of evolving sociopolitical and sociotechnical and contexts, which are likely to shape them in significant ways. This poses challenges to conventional evaluation approaches which draw on a model of baseline operations → intervention → changed operations (outcome). Second, evaluation of such programs must account for this changing context by adapting to it. This requires careful and creative choice of ontological, epistemological and methodological assumptions. New and significant challenges are faced in evaluating national EHR implementation endeavors. Based on experiences from this national evaluation of the implementation and adoption of the NHS CRS in England, we argue for an approach to these evaluations which moves away from seeing EHR systems as Information and Communication Technologies (ICT) projects requiring an essentially outcome-centred assessment towards a more interpretive approach that reflects the situated and evolving nature of EHR seen within multiple specific settings and reflecting a constantly changing milieu of policies

A Methodology to Assess the Impact of Optical and Electronic Crosstalk in a New Generation of Sensors Using Heritage Sensors

Science.gov (United States)

Oudrari, Hassan; Schwarting, Thomas; Chiang, Kwo-Fu; McIntire, Jeff; Pan, Chunhui; Xiong, Xiaoxiong; Butler, James

2010-01-01

Electronic and optical crosstalk are radiometric challenges that often exist in the focal plane design in many sensors Such as MODIS. A methodology is described to assess the impact due to optical and electronic crosstalk on the measured radiance, and thereafter, the retrieval of geophysical products using MODIS Level I data sets. Based on a postulated set of electronic and optical crosstalk coefficients, and a set of MODIS scenes, we have simulated a system signal contamination on any detector on a focal plane when another detector on that focal plane is stimulated with a geophysical signal. The original MODIS scenes and the crosstalk impacted scenes can be used with validated geophysical algorithms to derive the final data products. Products contaminated with crosstalk are then compared to those without contamination to assess the impact magnitude and location, and will allow us to separate Out-Of-Band (OOB) leaks from hand-to-hand optical crosstalk, and identify potential failures to meet climate research requirements.

Situating methodology within qualitative research.

Science.gov (United States)

Kramer-Kile, Marnie L

2012-01-01

Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

Establishment of Requirements and Methodology for the Development and Implementation of GreyMatters, a Memory Clinic Information System.

Science.gov (United States)

Tapuria, Archana; Evans, Matt; Curcin, Vasa; Austin, Tony; Lea, Nathan; Kalra, Dipak

2017-01-01

The aim of the paper is to establish the requirements and methodology for the development process of GreyMatters, a memory clinic system, outlining the conceptual, practical, technical and ethical challenges, and the experiences of capturing clinical and research oriented data along with the implementation of the system. The methodology for development of the information system involved phases of requirements gathering, modeling and prototype creation, and 'bench testing' the prototype with experts. The standard Institute of Electrical and Electronics Engineers (IEEE) recommended approach for the specifications of software requirements was adopted. An electronic health record (EHR) standard, EN13606 was used, and clinical modelling was done through archetypes and the project complied with data protection and privacy legislation. The requirements for GreyMatters were established. Though the initial development was complex, the requirements, methodology and standards adopted made the construction, deployment, adoption and population of a memory clinic and research database feasible. The electronic patient data including the assessment scales provides a rich source of objective data for audits and research and to establish study feasibility and identify potential participants for the clinical trials. The establishment of requirements and methodology, addressing issues of data security and confidentiality, future data compatibility and interoperability and medico-legal aspects such as access controls and audit trails, led to a robust and useful system. The evaluation supports that the system is an acceptable tool for clinical, administrative, and research use and forms a useful part of the wider information architecture.

Coupled forward-backward trajectory approach for nonequilibrium electron-ion dynamics

Science.gov (United States)

Sato, Shunsuke A.; Kelly, Aaron; Rubio, Angel

2018-04-01

We introduce a simple ansatz for the wave function of a many-body system based on coupled forward and backward propagating semiclassical trajectories. This method is primarily aimed at, but not limited to, treating nonequilibrium dynamics in electron-phonon systems. The time evolution of the system is obtained from the Euler-Lagrange variational principle, and we show that this ansatz yields Ehrenfest mean-field theory in the limit that the forward and backward trajectories are orthogonal, and in the limit that they coalesce. We investigate accuracy and performance of this method by simulating electronic relaxation in the spin-boson model and the Holstein model. Although this method involves only pairs of semiclassical trajectories, it shows a substantial improvement over mean-field theory, capturing quantum coherence of nuclear dynamics as well as electron-nuclear correlations. This improvement is particularly evident in nonadiabatic systems, where the accuracy of this coupled trajectory method extends well beyond the perturbative electron-phonon coupling regime. This approach thus provides an attractive route forward to the ab initio description of relaxation processes, such as thermalization, in condensed phase systems.

Understanding care in the past to develop caring science of the future: a historical methodological approach.

Science.gov (United States)

Nyborg, Vibeke N; Hvalvik, Sigrun; McCormack, Brendan

2018-05-31

In this paper, we explore how the development of historical research methodologies during the last centuries can contribute to more diverse and interdisciplinary research in future caring science, especially towards a care focus that is more person-centred. The adding of a historical approach by professional historians to the theory of person-centredness and person-centred care can develop knowledge that enables a more holistic understanding of the patient and the development of the patient perspective from the past until today. Thus, the aim was to show how developments within historical methodology can help us to understand elements of care in the past to further develop caring science in future. Historical research methodologies have advocated a "history from below" perspective, and this has enabled the evolution of systematic approaches to historical research that can be explored and critically analysed. Linked with this, the development of a more social and cultural oriented understanding of historical research has enabled historians to explore and add knowledge from a broader societal perspective. By focusing on the life of ordinary people and taking social and cultural aspects into account when trying to reconstruct the past, we can get a deeper understanding of health, care and medical development. However, an interdisciplinary research focus on person-centredness and person-centred care that includes professional historians can be challenging. In this paper, we argue that a historical perspective is necessary to meet the challenges we face in future delivery of health care to all people, in all parts of society in an ever more global world. © 2018 Nordic College of Caring Science.

New Statistical Multiparticle Approach to the Acceleration of Electrons by the Ion Field in Plasmas

Directory of Open Access Journals (Sweden)

Eugene Oks

2010-01-01

Full Text Available The phenomenon of the acceleration of the (perturbing electrons by the ion field (AEIF significantly reduces Stark widths and shifts in plasmas of relatively high densities and/or relatively low temperature. Our previous analytical calculations of the AEIF were based on the dynamical treatment: the starting point was the ion-microfield-caused changes of the trajectories and velocities of individual perturbing electrons. In the current paper, we employ a statistical approach: the starting point is the electron velocity distribution function modified by the ion microfield. The latter had been calculated by Romanovsky and Ebeling in the multiparticle description of the ion microfield. The result shows again the reduction of the electron Stark broadening. Thus two totally different analytical approaches (dynamical and statistical agree with each other and therefore disprove the corresponding recent fully-numerical simulations by Stambulchik et al. that claimed an increase of the electron Stark broadening.

Chemical and engineering approaches to enable organic field-effect transistors for electronic skin applications.

Science.gov (United States)

Sokolov, Anatoliy N; Tee, Benjamin C-K; Bettinger, Christopher J; Tok, Jeffrey B-H; Bao, Zhenan

2012-03-20

Skin is the body's largest organ and is responsible for the transduction of a vast amount of information. This conformable material simultaneously collects signals from external stimuli that translate into information such as pressure, pain, and temperature. The development of an electronic material, inspired by the complexity of this organ is a tremendous, unrealized engineering challenge. However, the advent of carbon-based electronics may offer a potential solution to this long-standing problem. In this Account, we describe the use of an organic field-effect transistor (OFET) architecture to transduce mechanical and chemical stimuli into electrical signals. In developing this mimic of human skin, we thought of the sensory elements of the OFET as analogous to the various layers and constituents of skin. In this fashion, each layer of the OFET can be optimized to carry out a specific recognition function. The separation of multimodal sensing among the components of the OFET may be considered a "divide and conquer" approach, where the electronic skin (e-skin) can take advantage of the optimized chemistry and materials properties of each layer. This design of a novel microstructured gate dielectric has led to unprecedented sensitivity for tactile pressure events. Typically, pressure-sensitive components within electronic configurations have suffered from a lack of sensitivity or long mechanical relaxation times often associated with elastomeric materials. Within our method, these components are directly compatible with OFETs and have achieved the highest reported sensitivity to date. Moreover, the tactile sensors operate on a time scale comparable with human skin, making them ideal candidates for integration as synthetic skin devices. The methodology is compatible with large-scale fabrication and employs simple, commercially available elastomers. The design of materials within the semiconductor layer has led to the incorporation of selectivity and sensitivity within

Validation of a Methodology to Predict Micro-Vibrations Based on Finite Element Model Approach

Science.gov (United States)

Soula, Laurent; Rathband, Ian; Laduree, Gregory

2014-06-01

This paper presents the second part of the ESA R&D study called "METhodology for Analysis of structure- borne MICro-vibrations" (METAMIC). After defining an integrated analysis and test methodology to help predicting micro-vibrations [1], a full-scale validation test campaign has been carried out. It is based on a bread-board representative of typical spacecraft (S/C) platform consisting in a versatile structure made of aluminium sandwich panels equipped with different disturbance sources and a dummy payload made of a silicon carbide (SiC) bench. The bread-board has been instrumented with a large set of sensitive accelerometers and tests have been performed including back-ground noise measurement, modal characterization and micro- vibration tests. The results provided responses to the perturbation coming from a reaction wheel or cryo-cooler compressors, operated independently then simultaneously with different operation modes. Using consistent modelling and associated experimental characterization techniques, a correlation status has been assessed by comparing test results with predictions based on FEM approach. Very good results have been achieved particularly for the case of a wheel in sweeping rate operation with test results over-predicted within a reasonable margin lower than two. Some limitations of the methodology have also been identified for sources operating at a fixed rate or coming with a small number of dominant harmonics and recommendations have been issued in order to deal with model uncertainties and stay conservative.

Electronic structure of FeTiSb using relativistic and scalar-relativistic approaches

Energy Technology Data Exchange (ETDEWEB)

Sahariya, Jagrati [Department of Physics, Manipal University Jaipur, Jaipur-303007, Rajasthan (India); Mund, H. S., E-mail: hmoond@gmail.com [Department of Physics, M. L. Sukhadia University, Udaipur-313001, Rajasthan (India)

2016-05-06

Electronic and magnetic properties of FeTiSb have been reported. The calculations are performed using spin polarized relativistic Korringa-Kohn-Rostoker scheme based on Green’s function method. Within SPR-KKR a fully relativistic and scalar-relativistic approaches have been used to investigate electronic structure of FeTiSb. Energy bands, total and partial density of states, atom specific magnetic moment along with total moment of FeTiSb alloys are presented.

Feminist approaches to social science: epistemological and methodological tenets.

Science.gov (United States)

Campbell, R; Wasco, S M

2000-12-01

This paper is a primer for community psychologists on feminist research. Much like the field of community psychology, feminist scholarship is defined by its values and process. Informed by the political ideologies of the 1970s women's movement (liberal, radical, socialist feminism, and womanism), feminist scholars reinterpreted classic concepts in philosophy of science to create feminist epistemologies and methodologies. Feminist epistemologies, such as feminist empiricism, standpoint theory, and postmodernism, recognize women's lived experiences as legitimate sources of knowledge. Feminist methodologies attempt to eradicate sexist bias in research and find ways to capture women's voices that are consistent with feminist ideals. Practically, the process of feminist research is characterized by four primary features: (1) expanding methodologies to include both quantitative and qualitative methods, (2) connecting women for group-level data collection, (3) reducing the hierarchical relationship between researchers and their participants to facilitate trust and disclosure, and (4) recognizing and reflecting upon the emotionality of women's lives. Recommendations for how community psychologists can integrate feminist scholarship into their practice are discussed.

A case on vendor selection methodology: An integrated approach

Directory of Open Access Journals (Sweden)

Nikhil C. Shil

2009-11-01

Full Text Available Vendor selection methodology is a highly researched area in supply chain management l terature and a very significant decision taken by supply chain managers due to technological advances in the manufacturing process. Such research has two basic dimensions: one is related to the identification of variables affecting the performance of the vendors and the other deals with the methodology to be applied. Most of the research conducted in this area deal with the upfront selection of vendors. However, it is very common to have a list of dedicated vendors due to the development of sophisticated production technologies like just in time (JIT, a lean or agile manufacturing process where continuous flow of materials is a requirement. This paper addresses the issue of selecting the optimal vendor from the internal database of a company. Factor analysis, analytical hierarchy process and regression analysis is used in an integrated way to supplement the vendor selection process. The methodology presented here is simply a proposal where every possible room for adjustment is available.

Continuum multiple-scattering approach to electron-molecule scattering and molecular photoionization

International Nuclear Information System (INIS)

Dehmer, J.L.; Dill, D.

1979-01-01

The multiple-scattering approach to the electronic continuum of molecules is described. The continuum multiple-scattering model (CMSM) was developed as a survey tool and, as such was required to satisfy two requirements. First, it had to have a very broad scope, which means (i) molecules of arbitrary geometry and complexity containing any atom in the periodic system, (ii) continuum electron energies from 0-1000 eV, and (iii) capability to treat a large range of processes involving both photoionization and electron scattering. Second, the structure of the theory was required to lend itself to transparent, physical interpretation of major spectral features such as shape resonances. A comprehensive theoretical framework for the continuum multiple scattering method is presented, as well as its applications to electron-molecule scattering and molecular photoionization. Highlights of recent applications in these two areas are reviewed. The major impact of the resulting studies over the last few years has been to establish the importance of shape resonances in electron collisions and photoionization of practically all (non-hydride) molecules

An integrated approach of composting methodologies for solid waste management

Directory of Open Access Journals (Sweden)

K. Kumaresan

2016-03-01

Full Text Available Organic fraction of solid waste, which upon degradation produces foul smell and generates pathogens, if not properly managed. Composting is not a method of waste disposal but it is a method of waste recycling and used for agricultural purposes. An integrated approach of composting methodology was tested for municipal solid waste management. Solid waste first was composted and after 22 days, was further processed by vermicomposting. Samples were routinely taken for analysis of carbon, nitrogen, moisture content, pH and temperature to determine the quality of composting. Decrease in moisture content to 32.1 %, relative decrease in carbon and nitrogen content were also observed. Among the different types of treatment, municipal solid waste + activated sludge integration showed promising results, followed by vermicomposting municipal solid waste + activated sludge combination, compared to the combinations of dried activated sludge, municipal solid waste + activated sludge semisolid and municipal solid waste + sewage water. Thus, windrow composting followed by vermicomposting gave a better result than other methods. Thus this method would serve as a potential alternative for solid waste management.

An integrated approach of composting methodologies for solid waste management

International Nuclear Information System (INIS)

Kumaresan, K.; Balan, R.; Sridhar, A.; Aravind, J.; Kanmani, P.

2016-01-01

Organic fraction of solid waste, which upon degradation produces foul smell and generates pathogens, if not properly managed. Composting is not a method of waste disposal but it is a method of waste recycling and used for agricultural purposes. An integrated approach of composting methodology was tested for municipal solid waste management. Solid waste first was composted and after 22 days, was further processed by vermicomposting. Samples were routinely taken for analysis of carbon, nitrogen, moisture content, p H and temperature to determine the quality of composting. Decrease in moisture content to 32.1 %, relative decrease in carbon and nitrogen content were also observed. Among the different types of treatment, municipal solid waste + activated sludge integration showed promising results, followed by vermicomposting municipal solid waste + activated sludge combination, compared to the combinations of dried activated sludge, municipal solid waste + activated sludge semisolid and municipal solid waste + sewage water. Thus, windrow composting followed by vermicomposting gave a better result than other methods. Thus this method would serve as a potential alternative for solid waste management.

Observation of superconducting fluxons by transmission electron microscopy: A Fourier space approach to calculate the electron optical phase shifts and images

International Nuclear Information System (INIS)

Beleggia, M.; Pozzi, G.

2001-01-01

An approach is presented for the calculation of the electron optical phase shift experienced by high-energy electrons in a transmission electron microscope, when they interact with the magnetic field associated with superconducting fluxons in a thin specimen tilted with respect to the beam. It is shown that by decomposing the vector potential in its Fourier components and by calculating the phase shift of each component separately, it is possible to obtain the Fourier transform of the electron optical phase shift, which can be inverted either analytically or numerically. It will be shown how this method can be used to recover the result, previously obtained by the real-space approach, relative to the case of a straight flux tube perpendicular to the specimen surfaces. Then the method is applied to the case of a London fluxon in a thin film, where the bending and the broadening of the magnetic-field lines due to the finite specimen thickness are now correctly taken into account and not treated approximately by means of a parabolic fit. Finally, it will be shown how simple models for the pancake structure of the fluxon can be analyzed within this framework and the main features of electron transmission images predicted

Combining a weighted caseload study with an organisational analysis in courts: first experiences with a new methodological approach in Switzerland

Directory of Open Access Journals (Sweden)

Daniela Winkler

2015-07-01

Full Text Available Determining the weighted caseload, i.e. the average amount of work time used for processing cases of different case categories, using different methodological approaches of weighted caseload studies results in case weights that indicate the current performance of a court. However, as the weighted caseload is often used in allocating resources or cases, the results of a weighted caseload study may be contested with the argument it is not clear whether they are based on an average good performance or whether higher or lower values could be assumed if operational management were optimised or qualitative aspects taken into account. Suitable methods therefore usually include quality adjustments of the weighted caseload. Also, the values can be validated using benchmarking. In Switzerland there is a general lack of workload measurement in courts. Therefore, in an analysis of the courts and in the Cantonal Prosecutor’s Office of a Swiss canton another method of validating weighted caseload values has been applied: the combination of a weighted caseload study with an organisational analysis. This paper introduces the new methodological approach and outlines preliminary methodological findings.

Identification and systems methodologies for territorial delimitation

Directory of Open Access Journals (Sweden)

Iván Montoya R

2010-12-01

Full Text Available This document identifies the main issues affecting the delimitation of territories and explores the conceptual approaches for describing the relationship of the territories understood as organizations with their environment. Subsequently, we studied the systems methodologies known as soft systems methodology, SSM, and complex adaptive systems, CAS. Finally, the advantages of systemic approaches to territorial delimitation are shown

Novel approaches to study low-energy electron-induced damage to DNA oligonucleotides

International Nuclear Information System (INIS)

Rackwitz, Jenny; Bald, Ilko; Ranković, Miloš Lj; Milosavljević, Aleksandar R

2015-01-01

The novel approach of DNA origami structures as templates for precise quantification of various well- defined oligonucleotides provides the opportunity to determine the sensitivity of complex DNA sequences towards low-energy electrons. (paper)

A Platform-Based Methodology for System-Level Mixed-Signal Design

Directory of Open Access Journals (Sweden)

Alberto Sangiovanni-Vincentelli

2010-01-01

Full Text Available The complexity of today's embedded electronic systems as well as their demanding performance and reliability requirements are such that their design can no longer be tackled with ad hoc techniques while still meeting tight time to-market constraints. In this paper, we present a system level design approach for electronic circuits, utilizing the platform-based design (PBD paradigm as the natural framework for mixed-domain design formalization. In PBD, a meet-in-the-middle approach allows systematic exploration of the design space through a series of top-down mapping of system constraints onto component feasibility models in a platform library, which is based on bottom-up characterizations. In this framework, new designs can be assembled from the precharacterized library components, giving the highest priority to design reuse, correct assembly, and efficient design flow from specifications to implementation. We apply concepts from design centering to enforce robustness to modeling errors as well as process, voltage, and temperature variations, which are currently plaguing embedded system design in deep-submicron technologies. The effectiveness of our methodology is finally shown on the design of a pipeline A/D converter and two receiver front-ends for UMTS and UWB communications.

Ionization Energies, Electron Affinities, and Polarization Energies of Organic Molecular Crystals: Quantitative Estimations from a Polarizable Continuum Model (PCM)–Tuned Range-Separated Density Functional Approach

KAUST Repository

Sun, Haitao; Ryno, Sean; Zhong, Cheng; Ravva, Mahesh Kumar; Sun, Zhenrong; Kö rzdö rfer, Thomas; Bredas, Jean-Luc

2016-01-01

We propose a new methodology for the first-principles description of the electronic properties relevant for charge transport in organic molecular crystals. This methodology, which is based on the combination of a non-empirical, optimally tuned range

Organizing the Methodology Work at Higher School

Directory of Open Access Journals (Sweden)

O. A. Plaksina

2012-01-01

Full Text Available The paper considers the methodology components of organizing the higher school training. The research and analysis of the existing methodology systems carried out by the authors reveals that their advantages and disadvantages are related to the type of the system creating element of the methodology system organizational structure. The optimal scheme of such system has been developed in the context of Vocational School Reorganization implying the specification and expansion of the set of basic design principles of any control system. Following the suggested organizational approach provides the grounds for teachers’ self development and professional growth. The methodology of the approach allows using the given structure in any higher educational institution, providing the system transition from its simple functioning to the sustainable development mode. 

A novel approach to electron data background treatment in an online wide-angle spectrometer for laser-accelerated ion and electron bunches

Science.gov (United States)

Lindner, F. H.; Bin, J. H.; Englbrecht, F.; Haffa, D.; Bolton, P. R.; Gao, Y.; Hartmann, J.; Hilz, P.; Kreuzer, C.; Ostermayr, T. M.; Rösch, T. F.; Speicher, M.; Parodi, K.; Thirolf, P. G.; Schreiber, J.

2018-01-01

Laser-based ion acceleration is driven by electrical fields emerging when target electrons absorb laser energy and consecutively leave the target material. A direct correlation between these electrons and the accelerated ions is thus to be expected and predicted by theoretical models. We report on a modified wide-angle spectrometer, allowing the simultaneous characterization of angularly resolved energy distributions of both ions and electrons. Equipped with online pixel detectors, the RadEye1 detectors, the investigation of this correlation gets attainable on a single shot basis. In addition to first insights, we present a novel approach for reliably extracting the primary electron energy distribution from the interfering secondary radiation background. This proves vitally important for quantitative extraction of average electron energies (temperatures) and emitted total charge.

Providing hierarchical approach for measuring supply chain performance using AHP and DEMATEL methodologies

Directory of Open Access Journals (Sweden)

Ali Najmi

2010-06-01

Full Text Available Measuring the performance of a supply chain is normally of a function of various parameters. Such a problem often involves in a multiple criteria decision making (MCMD problem where different criteria need to be defined and calculated, properly. During the past two decades, Analytical hierarchy procedure (AHP and DEMATEL have been some of the most popular MCDM approaches for prioritizing various attributes. The study of this paper uses a new methodology which is a combination of AHP and DEMATEL to rank various parameters affecting the performance of the supply chain. The DEMATEL is used for understanding the relationship between comparison metrics and AHP is used for the integration to provide a value for the overall performance.

A Methodological Approach to User Evaluation and Assessment of a Virtual Environment Hangout

Directory of Open Access Journals (Sweden)

Marco Pasin

2015-08-01

Full Text Available Innovation in virtual reality and motion sensing devices is pushing the development of virtual communication platforms towards completely immersive scenarios, which require full user interaction and create complex sensory experiences. This evolution influences user experiences and creates new paradigms for interaction, leading to an increased importance of user evaluation and assessment on new systems interfaces and usability, to validate platform design and development from the users’ point of view. The REVERIE research project aims to develop a virtual environment service for realistic inter-personal interaction. This paper describes the design challenges faced during the development process of user interfaces and the adopted methodological approach to user evaluation and assessment.

Collaborative Action Research in the Context of Developmental Work Research: A Methodological Approach for Science Teachers' Professional Development

Science.gov (United States)

Piliouras, Panagiotis; Lathouris, Dimitris; Plakitsi, Katerina; Stylianou, Liana

2015-01-01

The paper refers to the theoretical establishment and brief presentation of collaborative action research with the characteristics of "developmental work research" as an effective methodological approach so that science teachers develop themselves professionally. A specific case study is presented, in which we aimed to transform the…

Theoretical study of molecular vibrations in electron momentum spectroscopy experiments on furan: An analytical versus a molecular dynamical approach

International Nuclear Information System (INIS)

Morini, Filippo; Deleuze, Michael S.; Watanabe, Noboru; Takahashi, Masahiko

2015-01-01

The influence of thermally induced nuclear dynamics (molecular vibrations) in the initial electronic ground state on the valence orbital momentum profiles of furan has been theoretically investigated using two different approaches. The first of these approaches employs the principles of Born-Oppenheimer molecular dynamics, whereas the so-called harmonic analytical quantum mechanical approach resorts to an analytical decomposition of contributions arising from quantized harmonic vibrational eigenstates. In spite of their intrinsic differences, the two approaches enable consistent insights into the electron momentum distributions inferred from new measurements employing electron momentum spectroscopy and an electron impact energy of 1.2 keV. Both approaches point out in particular an appreciable influence of a few specific molecular vibrations of A 1 symmetry on the 9a 1 momentum profile, which can be unravelled from considerations on the symmetry characteristics of orbitals and their energy spacing

Mythology: methodological approach for the Classic Antiquity Historian

Directory of Open Access Journals (Sweden)

Andrea Lúcia Dorini de Oliveira Carvalho Rossi

2008-01-01

Full Text Available The central theme of this article is the application of the semiotical analysis as methodology of historical analysis of the mith present in the Dio Chrysostom's Discourses, Bitinian philosopher who lived between 40 and 115 A.D in Roman Empire.

Optimisation of warpage on thin shell plastic part using response surface methodology (RSM) and glowworm swarm optimisation (GSO)

Science.gov (United States)

Asyirah, B. N.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Hazwan, M. H. M.

2017-09-01

In manufacturing a variety of parts, plastic injection moulding is widely use. The injection moulding process parameters have played important role that affects the product's quality and productivity. There are many approaches in minimising the warpage ans shrinkage such as artificial neural network, genetic algorithm, glowworm swarm optimisation and hybrid approaches are addressed. In this paper, a systematic methodology for determining a warpage and shrinkage in injection moulding process especially in thin shell plastic parts are presented. To identify the effects of the machining parameters on the warpage and shrinkage value, response surface methodology is applied. In thos study, a part of electronic night lamp are chosen as the model. Firstly, experimental design were used to determine the injection parameters on warpage for different thickness value. The software used to analyse the warpage is Autodesk Moldflow Insight (AMI) 2012.

PSA methodology

International Nuclear Information System (INIS)

Magne, L.

1996-01-01

The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300 1 and EPS 900 2 PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs

Q methodology for post-social-turn research in SLA

Directory of Open Access Journals (Sweden)

Kay Irie

2014-01-01

Full Text Available Q methodology, an approach to inquiry on the subjective views about a complex phenomenon/issue which has been increasingly employed in a wide range of social science fields has not yet been applied in language learning and teaching research. It is a unique approach that has characteristics of both qualitative and quantitative research methods. The purpose of the present paper is to introduce Q methodology as an alternative approach and demonstrate its potential to respond to the needs of the field that has been expanding in its epistemological diversity since the social turn (Block, 2003; Ortega, 2012. The relevance of the methodology for SLA research will be discussed with a particular focus on the parallels between the development of the methodology in the 1930s and current criticisms towards the traditional cognitive approach in SLA. Using a published study (Irie & Ryan, 2014, the author explains how the focus on the holistic understanding of subjectivity is built into the procedure. Suggestions for possible areas of research and teaching in which Q methodology could be applied are discussed.

Development and application of a 2-electron reduced density matrix approach to electron transport via molecular junctions

Science.gov (United States)

Hoy, Erik P.; Mazziotti, David A.; Seideman, Tamar

2017-11-01

Can an electronic device be constructed using only a single molecule? Since this question was first asked by Aviram and Ratner in the 1970s [Chem. Phys. Lett. 29, 277 (1974)], the field of molecular electronics has exploded with significant experimental advancements in the understanding of the charge transport properties of single molecule devices. Efforts to explain the results of these experiments and identify promising new candidate molecules for molecular devices have led to the development of numerous new theoretical methods including the current standard theoretical approach for studying single molecule charge transport, i.e., the non-equilibrium Green's function formalism (NEGF). By pairing this formalism with density functional theory (DFT), a wide variety of transport problems in molecular junctions have been successfully treated. For some systems though, the conductance and current-voltage curves predicted by common DFT functionals can be several orders of magnitude above experimental results. In addition, since density functional theory relies on approximations to the exact exchange-correlation functional, the predicted transport properties can show significant variation depending on the functional chosen. As a first step to addressing this issue, the authors have replaced density functional theory in the NEGF formalism with a 2-electron reduced density matrix (2-RDM) method, creating a new approach known as the NEGF-RDM method. 2-RDM methods provide a more accurate description of electron correlation compared to density functional theory, and they have lower computational scaling compared to wavefunction based methods of similar accuracy. Additionally, 2-RDM methods are capable of capturing static electron correlation which is untreatable by existing NEGF-DFT methods. When studying dithiol alkane chains and dithiol benzene in model junctions, the authors found that the NEGF-RDM predicts conductances and currents that are 1-2 orders of magnitude below

An LWR design decision Methodology

International Nuclear Information System (INIS)

Leahy, T.J.; Rees, D.C.; Young, J.

1982-01-01

While all parties involved in nuclear plant regulation endeavor to make decisions which optimize the considerations of plant safety and financial impacts, these decisions are generally made without the benefit of a systematic and rigorous approach to the questions confronting the decision makers. A Design Decision Methodology has been developed which provides such a systematic approach. By employing this methodology, which makes use of currently accepted probabilistic risk assessment techniques and cost estimation, informed decisions may be made against a background of comparisons between the relative levels of safety and costs associated with various design alternatives

Systems Approach to Tourism: A Methodology for Defining Complex Tourism System

Directory of Open Access Journals (Sweden)

Jere Jakulin Tadeja

2017-08-01

Full Text Available Background and Purpose: The complexity of the tourism system, as well as modelling in a frame of system dynamics, will be discussed in this paper. The phaenomenon of tourism, which possesses the typical properties of global and local organisations, will be presented as an open complex system with all its elements, and an optimal methodology to explain the relations among them. The approach we want to present is due to its transparency an excellent tool for searching systems solutions and serves also as a strategic decision-making assessment. We will present systems complexity and develop three models of a complex tourism system: the first one will present tourism as an open complex system with its elements, which operate inside of a tourism market area. The elements of this system present subsystems, which relations and interdependencies will be explained with two models: causal-loop diagram and a simulation model in frame of systems dynamics.

The work environment disability-adjusted life year for use with life cycle assessment: a methodological approach.

Science.gov (United States)

Scanlon, Kelly A; Gray, George M; Francis, Royce A; Lloyd, Shannon M; LaPuma, Peter

2013-03-06

Life cycle assessment (LCA) is a systems-based method used to determine potential impacts to the environment associated with a product throughout its life cycle. Conclusions from LCA studies can be applied to support decisions regarding product design or public policy, therefore, all relevant inputs (e.g., raw materials, energy) and outputs (e.g., emissions, waste) to the product system should be evaluated to estimate impacts. Currently, work-related impacts are not routinely considered in LCA. The objectives of this paper are: 1) introduce the work environment disability-adjusted life year (WE-DALY), one portion of a characterization factor used to express the magnitude of impacts to human health attributable to work-related exposures to workplace hazards; 2) outline the methods for calculating the WE-DALY; 3) demonstrate the calculation; and 4) highlight strengths and weaknesses of the methodological approach. The concept of the WE-DALY and the methodological approach to its calculation is grounded in the World Health Organization's disability-adjusted life year (DALY). Like the DALY, the WE-DALY equation considers the years of life lost due to premature mortality and the years of life lived with disability outcomes to estimate the total number of years of healthy life lost in a population. The equation requires input in the form of the number of fatal and nonfatal injuries and illnesses that occur in the industries relevant to the product system evaluated in the LCA study, the age of the worker at the time of the fatal or nonfatal injury or illness, the severity of the injury or illness, and the duration of time lived with the outcomes of the injury or illness. The methodological approach for the WE-DALY requires data from various sources, multi-step instructions to determine each variable used in the WE-DALY equation, and assumptions based on professional opinion. Results support the use of the WE-DALY in a characterization factor in LCA. Integrating

Interacting electrons theory and computational approaches

CERN Document Server

Martin, Richard M; Ceperley, David M

2016-01-01

Recent progress in the theory and computation of electronic structure is bringing an unprecedented level of capability for research. Many-body methods are becoming essential tools vital for quantitative calculations and understanding materials phenomena in physics, chemistry, materials science and other fields. This book provides a unified exposition of the most-used tools: many-body perturbation theory, dynamical mean field theory and quantum Monte Carlo simulations. Each topic is introduced with a less technical overview for a broad readership, followed by in-depth descriptions and mathematical formulation. Practical guidelines, illustrations and exercises are chosen to enable readers to appreciate the complementary approaches, their relationships, and the advantages and disadvantages of each method. This book is designed for graduate students and researchers who want to use and understand these advanced computational tools, get a broad overview, and acquire a basis for participating in new developments.

Evaluation methodology based on physical security assessment results: a utility theory approach

International Nuclear Information System (INIS)

Bennett, H.A.; Olascoaga, M.T.

1978-03-01

This report describes an evaluation methodology which aggregates physical security assessment results for nuclear facilities into an overall measure of adequacy. This methodology utilizes utility theory and conforms to a hierarchical structure developed by the NRC. Implementation of the methodology is illustrated by several examples. Recommendations for improvements in the evaluation process are given

Evaluating the statistical methodology of randomized trials on dentin hypersensitivity management.

Science.gov (United States)

Matranga, Domenica; Matera, Federico; Pizzo, Giuseppe

2017-12-27

The present study aimed to evaluate the characteristics and quality of statistical methodology used in clinical studies on dentin hypersensitivity management. An electronic search was performed for data published from 2009 to 2014 by using PubMed, Ovid/MEDLINE, and Cochrane Library databases. The primary search terms were used in combination. Eligibility criteria included randomized clinical trials that evaluated the efficacy of desensitizing agents in terms of reducing dentin hypersensitivity. A total of 40 studies were considered eligible for assessment of quality statistical methodology. The four main concerns identified were i) use of nonparametric tests in the presence of large samples, coupled with lack of information about normality and equality of variances of the response; ii) lack of P-value adjustment for multiple comparisons; iii) failure to account for interactions between treatment and follow-up time; and iv) no information about the number of teeth examined per patient and the consequent lack of cluster-specific approach in data analysis. Owing to these concerns, statistical methodology was judged as inappropriate in 77.1% of the 35 studies that used parametric methods. Additional studies with appropriate statistical analysis are required to obtain appropriate assessment of the efficacy of desensitizing agents.

The pedagogical possibilities in the education of scientific research methodology in information science and the scientific objects of this field: durkheim approaches

OpenAIRE

Francisco das Chagas de Souza

2003-01-01

This article results of bibliographical, exploratory and qualitative research. Its argues that three approaches are gifts in the educational process of discipline of the Scientific Research Methodology in Information Science. They are the social facts of the Information Science, the types of the research and the social theory. It sees that the pedagogical possibilities of the education of Scientific Methodology in Information Science are related with the practical one of the writing which dep...

Critical infrastructure systems of systems assessment methodology.

Energy Technology Data Exchange (ETDEWEB)

Sholander, Peter E.; Darby, John L.; Phelan, James M.; Smith, Bryan; Wyss, Gregory Dane; Walter, Andrew; Varnado, G. Bruce; Depoy, Jennifer Mae

2006-10-01

Assessing the risk of malevolent attacks against large-scale critical infrastructures requires modifications to existing methodologies that separately consider physical security and cyber security. This research has developed a risk assessment methodology that explicitly accounts for both physical and cyber security, while preserving the traditional security paradigm of detect, delay, and respond. This methodology also accounts for the condition that a facility may be able to recover from or mitigate the impact of a successful attack before serious consequences occur. The methodology uses evidence-based techniques (which are a generalization of probability theory) to evaluate the security posture of the cyber protection systems. Cyber threats are compared against cyber security posture using a category-based approach nested within a path-based analysis to determine the most vulnerable cyber attack path. The methodology summarizes the impact of a blended cyber/physical adversary attack in a conditional risk estimate where the consequence term is scaled by a ''willingness to pay'' avoidance approach.

An effective approach for choosing an electronic health record.

Science.gov (United States)

Rowley, Robert

2009-01-01

With government stimulus money becoming available to encourage healthcare facilities to adopt electronic health record (EHR) systems, the decision to move forward with implementing an EHR system has taken on an urgency not previously seen. The EHR landscape is evolving rapidly and the underlying technology platform is becoming increasingly interconnected. One must make sure that an EHR decision does not lock oneself into technology obsolescence. The best approach for evaluating an EHR is on the basis of:usability, interoperability, and affordability.

Combined UMC- DFT prediction of electron-hole coupling in unit cells of pentacene crystals.

Science.gov (United States)

Leal, Luciano Almeida; de Souza Júnior, Rafael Timóteo; de Almeida Fonseca, Antonio Luciano; Ribeiro Junior, Luiz Antonio; Blawid, Stefan; da Silva Filho, Demetrio Antonio; da Cunha, Wiliam Ferreira

2017-05-01

Pentacene is an organic semiconductor that draws special attention from the scientific community due to the high mobility of its charge carriers. As electron-hole interactions are important aspects in the regard of such property, a computationally inexpensive method to predict the coupling between these quasi-particles is highly desired. In this work, we propose a hybrid methodology of combining Uncoupled Monte Carlo Simulations (UMC) and Density functional Theory (DFT) methodologies to obtain a good compromise between computational feasibility and accuracy. As a first step in considering a Pentacene crystal, we describe its unit cell: the Pentacene Dimer. Because many conformations can be encountered for the dimer and considering the complexity of the system, we make use of UMC in order to find the most probable structures and relative orientations for the Pentacene-Pentacene complex. Following, we carry out electronic structure calculations in the scope of DFT with the goal of describing the electron-hole coupling on the most probable configurations obtained by UMC. The comparison of our results with previously reported data on the literature suggests that the methodology is well suited for describing transfer integrals of organic semiconductors. The observed accuracy together with the smaller computational cost required by our approach allows us to conclude that such methodology might be an important tool towards the description of systems with higher complexity.

Development of methodology for assessment of absorbed dose and stopping power for low energy conversion electrons

International Nuclear Information System (INIS)

Almeida, Ivan Pedro Salati de

1995-08-01

The evaluation of absorbed dose in the case of external and internal contamination due to radionuclides is sometimes hard, because of the difficulties in the assessment of the absorbed dose caused by electrons with energy less than 100 KeV in mucous membrane. In this work, a methodology for assessment of absorbed dose and stopping power in VYNS (co-polymer of polivinyl chloride - acetate) absorbers, for the 62.5 KeV and 84-88 KeV energy 109 Cd conversion electrons, working with a 4 π proportional pressurized detector, is presented. In order to assure the reproducibility of measurement conditions, one of the detector halves has been used to obtain a spectrum of a thin 109 Cd source, without absorber. The other half of the detector was used in concomitance to obtain spectra with different thicknesses if absorber. The absorbed energy was obtained subtracting each spectrum with absorber from the spectrum without absorber, which were stored in a microcomputer connected to signal processing systems by ACE type interface. The VYNS weight and thickness were evaluated using common radionuclide metrology procedures. As VYNS has characteristics similar to a tissue equivalent material, the results obtained are consistent with dosimetric concepts and have a good agreement with those of the literature. (author)

Soft systems methodology and the ecosystem approach: a system study of the Cooum River and environs in Chennai, India.

Science.gov (United States)

Bunch, Martin J

2003-02-01

This paper discusses the integration of soft systems methodology (SSM) within an ecosystem approach in research to support rehabilitation and management of the Cooum River and environs in Chennai, India. The Cooum is an extremely polluted urban stream. Its management is complicated by high rates of population growth, poverty, uncontrolled urban development, jurisdictional conflicts, institutional culture, flat topography, tidal action, blockage of the river mouth, and monsoon flooding. The situation is characterized by basic uncertainty about main processes and activities, and the nature of relationships among actors and elements in the system.SSM is an approach for dealing with messy or ill-structured problematic situations involving human activity. In this work SSM contributed techniques (such as "rich picture" and "CATWOE" tools) to description of the Cooum situation as a socioecological system and informed the approach itself at a theoretical level. Application of three general phases in SSM is discussed in the context of the Cooum River research: (1) problem definition and exploration of the problem situation, (2) development of conceptual models of relevant systems, and (3) the use of these to generate insight and stimulate debate about desirable and feasible change. Its use here gives weight to the statement by others that SSM would be a particularly appropriate methodology to operate the ecosystem approach. As well as informing efforts at management of the Cooum system, this work led the way to explore an adaptive ecosystem approach more broadly to management of the urban environment for human health in Chennai.

A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

Energy Technology Data Exchange (ETDEWEB)

Dias, Luís G., E-mail: ldias@ipb.pt [Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); CQ-VR, Centro de Química – Vila Real, University of Trás-os-Montes e Alto Douro, Apartado 1013, 5001-801 Vila Real (Portugal); Veloso, Ana C.A. [Instituto Politécnico de Coimbra, ISEC, DEQB, Rua Pedro Nunes, Quinta da Nora, 3030-199 Coimbra (Portugal); CEB-Centre of Biological Engineering, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Sousa, Mara E.B.C.; Estevinho, Letícia [CIMO-Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); Machado, Adélio A.S.C. [LAQUIPAI – Laboratório de Química Inorgânica Pura e de Aplicação Interdisciplinar, Departamento de Química, Faculdade de Ciências da, Universidade do Porto, Rua Campo Alegre n°. 687, 4169-007 Porto (Portugal); and others

2015-11-05

Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens

A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

International Nuclear Information System (INIS)

Dias, Luís G.; Veloso, Ana C.A.; Sousa, Mara E.B.C.; Estevinho, Letícia; Machado, Adélio A.S.C.

2015-01-01

Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens relative

Trends in scenario development methodologies and integration in NUMO's approach

International Nuclear Information System (INIS)

Ebashi, Takeshi; Ishiguro, Katsuhiko; Wakasugi, Keiichiro; Kawamura, Hideki; Gaus, Irina; Vomvoris, Stratis; Martin, Andrew J.; Smith, Paul

2011-01-01

The development of scenarios for quantitative or qualitative analysis is a key element of the assessment of the safety of geological disposal systems. As an outcome of an international workshop attended by European and the Japanese implementers, a number of features common to current methodologies could be identified, as well as trends in their evolution over time. In the late nineties, scenario development was often described as a bottom-up process, whereby scenarios were said to be developed in essence from FEP databases. Nowadays, it is recognised that, in practice, the approaches actually adopted are better described as top-down or 'hybrid', taking as their starting point an integrated (top-down) understanding of the system under consideration including uncertainties in initial state, sometimes assisted by the development of 'storyboards'. A bottom-up element remains (hence the term 'hybrid') to the extent that FEP databases or FEP catalogues (including interactions) are still used, but the focus is generally on completeness checking, which occurs parallel to the main assessment process. Recent advances focus on the consistent treatment of uncertainties throughout the safety assessment and on the integration of operational safety and long term safety. (author)

Systematic Review Methodology in Higher Education

Science.gov (United States)

Bearman, Margaret; Smith, Calvin D.; Carbone, Angela; Slade, Susan; Baik, Chi; Hughes-Warrington, Marnie; Neumann, David L.

2012-01-01

Systematic review methodology can be distinguished from narrative reviews of the literature through its emphasis on transparent, structured and comprehensive approaches to searching the literature and its requirement for formal synthesis of research findings. There appears to be relatively little use of the systematic review methodology within the…

Electron work function-a promising guiding parameter for material design.

Science.gov (United States)

Lu, Hao; Liu, Ziran; Yan, Xianguo; Li, Dongyang; Parent, Leo; Tian, Harry

2016-04-14

Using nickel added X70 steel as a sample material, we demonstrate that electron work function (EWF), which largely reflects the electron behavior of materials, could be used as a guide parameter for material modification or design. Adding Ni having a higher electron work function to X70 steel brings more "free" electrons to the steel, leading to increased overall work function, accompanied with enhanced e(-)-nuclei interactions or higher atomic bond strength. Young's modulus and hardness increase correspondingly. However, the free electron density and work function decrease as the Ni content is continuously increased, accompanied with the formation of a second phase, FeNi3, which is softer with a lower work function. The decrease in the overall work function corresponds to deterioration of the mechanical strength of the steel. It is expected that EWF, a simple but fundamental parameter, may lead to new methodologies or supplementary approaches for metallic materials design or tailoring on a feasible electronic base.

Data-driven approach for creating synthetic electronic medical records

Directory of Open Access Journals (Sweden)

Moniz Linda

2010-10-01

Full Text Available Abstract Background New algorithms for disease outbreak detection are being developed to take advantage of full electronic medical records (EMRs that contain a wealth of patient information. However, due to privacy concerns, even anonymized EMRs cannot be shared among researchers, resulting in great difficulty in comparing the effectiveness of these algorithms. To bridge the gap between novel bio-surveillance algorithms operating on full EMRs and the lack of non-identifiable EMR data, a method for generating complete and synthetic EMRs was developed. Methods This paper describes a novel methodology for generating complete synthetic EMRs both for an outbreak illness of interest (tularemia and for background records. The method developed has three major steps: 1 synthetic patient identity and basic information generation; 2 identification of care patterns that the synthetic patients would receive based on the information present in real EMR data for similar health problems; 3 adaptation of these care patterns to the synthetic patient population. Results We generated EMRs, including visit records, clinical activity, laboratory orders/results and radiology orders/results for 203 synthetic tularemia outbreak patients. Validation of the records by a medical expert revealed problems in 19% of the records; these were subsequently corrected. We also generated background EMRs for over 3000 patients in the 4-11 yr age group. Validation of those records by a medical expert revealed problems in fewer than 3% of these background patient EMRs and the errors were subsequently rectified. Conclusions A data-driven method was developed for generating fully synthetic EMRs. The method is general and can be applied to any data set that has similar data elements (such as laboratory and radiology orders and results, clinical activity, prescription orders. The pilot synthetic outbreak records were for tularemia but our approach may be adapted to other infectious

Data-driven approach for creating synthetic electronic medical records.

Science.gov (United States)

Buczak, Anna L; Babin, Steven; Moniz, Linda

2010-10-14

New algorithms for disease outbreak detection are being developed to take advantage of full electronic medical records (EMRs) that contain a wealth of patient information. However, due to privacy concerns, even anonymized EMRs cannot be shared among researchers, resulting in great difficulty in comparing the effectiveness of these algorithms. To bridge the gap between novel bio-surveillance algorithms operating on full EMRs and the lack of non-identifiable EMR data, a method for generating complete and synthetic EMRs was developed. This paper describes a novel methodology for generating complete synthetic EMRs both for an outbreak illness of interest (tularemia) and for background records. The method developed has three major steps: 1) synthetic patient identity and basic information generation; 2) identification of care patterns that the synthetic patients would receive based on the information present in real EMR data for similar health problems; 3) adaptation of these care patterns to the synthetic patient population. We generated EMRs, including visit records, clinical activity, laboratory orders/results and radiology orders/results for 203 synthetic tularemia outbreak patients. Validation of the records by a medical expert revealed problems in 19% of the records; these were subsequently corrected. We also generated background EMRs for over 3000 patients in the 4-11 yr age group. Validation of those records by a medical expert revealed problems in fewer than 3% of these background patient EMRs and the errors were subsequently rectified. A data-driven method was developed for generating fully synthetic EMRs. The method is general and can be applied to any data set that has similar data elements (such as laboratory and radiology orders and results, clinical activity, prescription orders). The pilot synthetic outbreak records were for tularemia but our approach may be adapted to other infectious diseases. The pilot synthetic background records were in the 4

PSA methodology

Energy Technology Data Exchange (ETDEWEB)

Magne, L

1997-12-31

The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300{sup 1} and EPS 900{sup 2} PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs.

Learning centred approach for developing the electronic information search processes of students.

Science.gov (United States)

Shanahan, Madeleine

2009-11-01

Undergraduate students of the twenty-first century are widely regarded as 'technologically savvy' and have embraced the electronic information world. The literature, however, describes undergraduate students as using a limited range of electronic information sources and not critically evaluating the information they retrieve from internet searches. The aim was to evaluate a purposefully designed intervention that sought to expand the information search and evaluation practices of undergraduate students. The intervention scaffolded an independent learning activity in the form of a group-based project. Survey methodology was used to collect data from student pre- and post-intervention for two cohorts of students who undertook the intervention in 2005 and 2006 involving a total of 71 students. Percentages were used to describe survey findings and chi-square analysis and Fisher's exact test examined differences between groups. Questionnaires were completed by 59 students (response rate 83%) pre-intervention and 49 students (response rate 69%) post-intervention. Post-intervention there were positive and statistically significant differences in database searching behaviour (p = 0.000), use of Google Scholar (p = 0.035) and number of criteria used to evaluate information retrieved from the internet (p = 0.000) by students. By positively reshaping the electronic information search and evaluation practices of students we are helping students to find informed information sources as they engage in independent learning activities at university and as future health professionals.

Molecular-Scale Electronics: From Concept to Function.

Science.gov (United States)

Xiang, Dong; Wang, Xiaolong; Jia, Chuancheng; Lee, Takhee; Guo, Xuefeng

2016-04-13

Creating functional electrical circuits using individual or ensemble molecules, often termed as "molecular-scale electronics", not only meets the increasing technical demands of the miniaturization of traditional Si-based electronic devices, but also provides an ideal window of exploring the intrinsic properties of materials at the molecular level. This Review covers the major advances with the most general applicability and emphasizes new insights into the development of efficient platform methodologies for building reliable molecular electronic devices with desired functionalities through the combination of programmed bottom-up self-assembly and sophisticated top-down device fabrication. First, we summarize a number of different approaches of forming molecular-scale junctions and discuss various experimental techniques for examining these nanoscale circuits in details. We then give a full introduction of characterization techniques and theoretical simulations for molecular electronics. Third, we highlight the major contributions and new concepts of integrating molecular functionalities into electrical circuits. Finally, we provide a critical discussion of limitations and main challenges that still exist for the development of molecular electronics. These analyses should be valuable for deeply understanding charge transport through molecular junctions, the device fabrication process, and the roadmap for future practical molecular electronics.

Methodological approach to a multidimensional evaluation of food and nutrition policies.

Science.gov (United States)

Santos, Leonor Maria Pacheco; dos Santos, Sandra Maria Chaves

2003-01-01

Recommendations arising from global conferences and summits, expressed the need to formulate and implement public policies to improve household food security. In the context of maximizing benefits given available resources, comprehensive evaluations of the nutrition policies and programs are needed. One obstacle to overcome was a clear definition of terminology; the words efficiency, effectiveness, efficacy and impact, widely used in the context of program evaluation, are sometimes interchanged and there is no consensus about their precise definition. Another approach to health evaluation is based in the paradigm structure-process-outcome. The level structure contemplated the installations, resources, instruments (physical and discursive), as well as the technical bureaucratic organizational structures. Process encompassed the whole set of intervention activities developed, whereas the dimension of outcome comprised the effects of interventions on the health and nutrition of beneficiaries. Each of the three dimensions constitutes a continuum in the evaluation procedure: the structure only fulfills its purposes if the processes are adequate and conversely, processes cannot alone supersede structural limitations. Moreover, all the three dimensions only reach their ultimate objectives through the completion of outcomes. The methodology proposed here has been tested in the case of Bahia, Northeast Brazil, and it was found to be adequate for this type of analysis. We hope this approach of a comprehensive multidimensional evaluation, constitutes an effective contribution for program planners and program managers, in particular with regard to the obstacles detected, some of which can surely be overcome.

Embodied Writing: Choreographic Composition as Methodology

Science.gov (United States)

Ulmer, Jasmine B.

2015-01-01

This paper seeks to examine how embodied methodological approaches might inform dance education practice and research. Through a series of examples, this paper explores how choreographic writing might function as an embodied writing methodology. Here, choreographic writing is envisioned as a form of visual word choreography in which words move,…

Assessing importance and satisfaction judgments of intermodal work commuters with electronic survey methodology.

Science.gov (United States)

2013-09-01

Recent advances in multivariate methodology provide an opportunity to further the assessment of service offerings in public transportation for work commuting. We offer methodologies that are alternative to direct rating scale and have advantages in t...

Forming professional mobility of a future teacher: methodological approaches

Directory of Open Access Journals (Sweden)

Prima Raisa Nikolaevna

2011-10-01

Full Text Available Analyzes the theoretical and methodological principles of occupational mobility of future teachers. Focuses on the motivation of the choice of systems methodology, the "system integrity" as the dominant conceptual study. It is noted that the educational process of higher education provides an opportunity: the implementation of integration and differentiation of learning content, technology, formation of professional mobility, the stimulating activity of quasi professional future teachers, mainstream interdisciplinary connections. It is established that the formation of a mobile professional organization provides some of the "field capacity", education and upbringing environment, life. It focuses on the future of professional diversity of choice of the status of growth, professional development, rapid orientation (adapted, actively striving to change the unfavorable situation.

Convective heat transfer enhancement by diamond shaped micro-protruded patterns for heat sinks: Thermal fluid dynamic investigation and novel optimization methodology

International Nuclear Information System (INIS)

Ventola, Luigi; Dialameh, Masoud; Fasano, Matteo; Chiavazzo, Eliodoro; Asinari, Pietro

2016-01-01

Highlights: • A novel methodology for optimal design of patterned heat sink surfaces is proposed. • Heat transfer enhancement by patterned surfaces is measured experimentally. • Role of fluid dynamics and geometrical scales on heat transfer is clarified. - Abstract: In the present work, micro-protruded patterns on flush mounted heat sinks for convective heat transfer enhancement are investigated and a novel methodology for thermal optimization is proposed. Patterned heat sinks are experimentally characterized in fully turbulent regime, and the role played by geometrical parameters and fluid dynamic scales is discussed. A methodology specifically suited for micro-protruded pattern optimization is designed, leading to 73% enhancement in thermal performance respect to commercially available heat sinks, at fixed costs. This work is expected to introduce a new methodological approach for a more systematic and efficient development of solutions for electronics cooling.

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix

International Nuclear Information System (INIS)

Miller, William H.; Cotton, Stephen J.

2016-01-01

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory—e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states—and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix.

Science.gov (United States)

Miller, William H; Cotton, Stephen J

2016-08-28

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory-e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states-and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix

Energy Technology Data Exchange (ETDEWEB)

Miller, William H., E-mail: millerwh@berkeley.edu; Cotton, Stephen J., E-mail: StephenJCotton47@gmail.com [Department of Chemistry and Kenneth S. Pitzer Center for Theoretical Chemistry, University of California, and Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States)

2016-08-28

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory—e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states—and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.

NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

Science.gov (United States)

Tuey, Richard C.; Lane, Robert; Hart, Susan V.

1995-01-01

The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

Empirical evaluation and justification of methodologies in psychological science.

Science.gov (United States)

Proctor, R W; Capaldi, E J

2001-11-01

The purpose of this article is to describe a relatively new movement in the history and philosophy of science, naturalism, a form of pragmatism emphasizing that methodological principles are empirical statements. Thus, methodological principles must be evaluated and justified on the same basis as other empirical statements. On this view, methodological statements may be less secure than the specific scientific theories to which they give rise. The authors examined the feasibility of a naturalistic approach to methodology using logical and historical analysis and by contrasting theories that predict new facts versus theories that explain already known facts. They provide examples of how differences over methodological issues in psychology and in science generally may be resolved using a naturalistic, or empirical, approach.

Nuclear-electronic orbital reduced explicitly correlated Hartree-Fock approach: Restricted basis sets and open-shell systems

International Nuclear Information System (INIS)

Brorsen, Kurt R.; Sirjoosingh, Andrew; Pak, Michael V.; Hammes-Schiffer, Sharon

2015-01-01

The nuclear electronic orbital (NEO) reduced explicitly correlated Hartree-Fock (RXCHF) approach couples select electronic orbitals to the nuclear orbital via Gaussian-type geminal functions. This approach is extended to enable the use of a restricted basis set for the explicitly correlated electronic orbitals and an open-shell treatment for the other electronic orbitals. The working equations are derived and the implementation is discussed for both extensions. The RXCHF method with a restricted basis set is applied to HCN and FHF − and is shown to agree quantitatively with results from RXCHF calculations with a full basis set. The number of many-particle integrals that must be calculated for these two molecules is reduced by over an order of magnitude with essentially no loss in accuracy, and the reduction factor will increase substantially for larger systems. Typically, the computational cost of RXCHF calculations with restricted basis sets will scale in terms of the number of basis functions centered on the quantum nucleus and the covalently bonded neighbor(s). In addition, the RXCHF method with an odd number of electrons that are not explicitly correlated to the nuclear orbital is implemented using a restricted open-shell formalism for these electrons. This method is applied to HCN + , and the nuclear densities are in qualitative agreement with grid-based calculations. Future work will focus on the significance of nonadiabatic effects in molecular systems and the further enhancement of the NEO-RXCHF approach to accurately describe such effects

Nuclear-electronic orbital reduced explicitly correlated Hartree-Fock approach: Restricted basis sets and open-shell systems

Energy Technology Data Exchange (ETDEWEB)

Brorsen, Kurt R.; Sirjoosingh, Andrew; Pak, Michael V.; Hammes-Schiffer, Sharon, E-mail: shs3@illinois.edu [Department of Chemistry, University of Illinois at Urbana-Champaign, 600 South Mathews Ave., Urbana, Illinois 61801 (United States)

2015-06-07

The nuclear electronic orbital (NEO) reduced explicitly correlated Hartree-Fock (RXCHF) approach couples select electronic orbitals to the nuclear orbital via Gaussian-type geminal functions. This approach is extended to enable the use of a restricted basis set for the explicitly correlated electronic orbitals and an open-shell treatment for the other electronic orbitals. The working equations are derived and the implementation is discussed for both extensions. The RXCHF method with a restricted basis set is applied to HCN and FHF{sup −} and is shown to agree quantitatively with results from RXCHF calculations with a full basis set. The number of many-particle integrals that must be calculated for these two molecules is reduced by over an order of magnitude with essentially no loss in accuracy, and the reduction factor will increase substantially for larger systems. Typically, the computational cost of RXCHF calculations with restricted basis sets will scale in terms of the number of basis functions centered on the quantum nucleus and the covalently bonded neighbor(s). In addition, the RXCHF method with an odd number of electrons that are not explicitly correlated to the nuclear orbital is implemented using a restricted open-shell formalism for these electrons. This method is applied to HCN{sup +}, and the nuclear densities are in qualitative agreement with grid-based calculations. Future work will focus on the significance of nonadiabatic effects in molecular systems and the further enhancement of the NEO-RXCHF approach to accurately describe such effects.

A modified linear algebraic approach to electron scattering using cubic splines

International Nuclear Information System (INIS)

Kinney, R.A.

1986-01-01

A modified linear algebraic approach to the solution of the Schrodiner equation for low-energy electron scattering is presented. The method uses a piecewise cubic-spline approximation of the wavefunction. Results in the static-potential and the static-exchange approximations for e - +H s-wave scattering are compared with unmodified linear algebraic and variational linear algebraic methods. (author)

Prioritizing critical success factors for reverse logistics implementation using fuzzy-TOPSIS methodology

Science.gov (United States)

Agrawal, Saurabh; Singh, Rajesh K.; Murtaza, Qasim

2016-03-01

Electronics industry is one of the fastest growing industries in the world. In India also, there are high turnovers and growing demand of electronics product especially after post liberalization in early nineties. These products generate e-waste which has become big environmental issue. Industries can handle these e-waste and product returns efficiently by developing reverse logistics (RL) system. A thorough study of critical success factors (CSFs) and their ordered implementation is essential for successful RL implementation. The aim of the study is to review the CSFs, and to prioritize them for RL implementation in Indian electronics industry. Twelve CSFs were identified through literature review, and discussion with the experts from the Indian electronics industry. Fuzzy-Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach is proposed for prioritizing these CSFs. Perusal of literature indicates that fuzzy-TOPSIS has not been applied earlier for prioritization of CSFs in Indian electronics industry. Five Indian electronics companies were selected for evaluation of this methodology. Results indicate that most of the identified factors are crucial for the RL implementation. Top management awareness, resource management, economic factors, and contracts terms and conditions are top four prioritized factor, and process capabilities and skilled workers is the least prioritized factor. The findings will be useful for successful RL implementation in Indian electronics industry.

Variational nonadiabatic dynamics in the moving crude adiabatic representation: Further merging of nuclear dynamics and electronic structure

Science.gov (United States)

Joubert-Doriol, Loïc; Izmaylov, Artur F.

2018-03-01

A new methodology of simulating nonadiabatic dynamics using frozen-width Gaussian wavepackets within the moving crude adiabatic representation with the on-the-fly evaluation of electronic structure is presented. The main feature of the new approach is the elimination of any global or local model representation of electronic potential energy surfaces; instead, the electron-nuclear interaction is treated explicitly using the Gaussian integration. As a result, the new scheme does not introduce any uncontrolled approximations. The employed variational principle ensures the energy conservation and leaves the number of electronic and nuclear basis functions as the only parameter determining the accuracy. To assess performance of the approach, a model with two electronic and two nuclear spacial degrees of freedom containing conical intersections between potential energy surfaces has been considered. Dynamical features associated with nonadiabatic transitions and nontrivial geometric (or Berry) phases were successfully reproduced within a limited basis expansion.

Communication: Electronic and transport properties of molecular junctions under a finite bias: A dual mean field approach

International Nuclear Information System (INIS)

Liu, Shuanglong; Feng, Yuan Ping; Zhang, Chun

2013-01-01

We show that when a molecular junction is under an external bias, its properties cannot be uniquely determined by the total electron density in the same manner as the density functional theory for ground state properties. In order to correctly incorporate bias-induced nonequilibrium effects, we present a dual mean field (DMF) approach. The key idea is that the total electron density together with the density of current-carrying electrons are sufficient to determine the properties of the system. Two mean fields, one for current-carrying electrons and the other one for equilibrium electrons can then be derived. Calculations for a graphene nanoribbon junction show that compared with the commonly used ab initio transport theory, the DMF approach could significantly reduce the electric current at low biases due to the non-equilibrium corrections to the mean field potential in the scattering region

Theory and Methodology in Researching Emotions in Education

Science.gov (United States)

Zembylas, Michalinos

2007-01-01

Differing theoretical approaches to the study of emotions are presented: emotions as private (psychodynamic approaches); emotions as sociocultural phenomena (social constructionist approaches); and a third perspective (interactionist approaches) transcending these two. These approaches have important methodological implications in studying…

Soft Systems Methodology

Science.gov (United States)

Checkland, Peter; Poulter, John

Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

Constructivism: a naturalistic methodology for nursing inquiry.

Science.gov (United States)

Appleton, J V; King, L

1997-12-01

This article will explore the philosophical underpinnings of the constructivist research paradigm. Despite its increasing popularity in evaluative health research studies there is limited recognition of constructivism in popular research texts. Lincoln and Guba's original approach to constructivist methodology is outlined and a detailed framework for nursing research is offered. Fundamental issues and concerns surrounding this methodology are debated and differences between method and methodology are highlighted.

A Methodological Approach to Quantifying Plyometric Intensity.

Science.gov (United States)

Jarvis, Mark M; Graham-Smith, Phil; Comfort, Paul

2016-09-01

Jarvis, MM, Graham-Smith, P, and Comfort, P. A Methodological approach to quantifying plyometric intensity. J Strength Cond Res 30(9): 2522-2532, 2016-In contrast to other methods of training, the quantification of plyometric exercise intensity is poorly defined. The purpose of this study was to evaluate the suitability of a range of neuromuscular and mechanical variables to describe the intensity of plyometric exercises. Seven male recreationally active subjects performed a series of 7 plyometric exercises. Neuromuscular activity was measured using surface electromyography (SEMG) at vastus lateralis (VL) and biceps femoris (BF). Surface electromyography data were divided into concentric (CON) and eccentric (ECC) phases of movement. Mechanical output was measured by ground reaction forces and processed to provide peak impact ground reaction force (PF), peak eccentric power (PEP), and impulse (IMP). Statistical analysis was conducted to assess the reliability intraclass correlation coefficient and sensitivity smallest detectable difference of all variables. Mean values of SEMG demonstrate high reliability (r ≥ 0.82), excluding ECC VL during a 40-cm drop jump (r = 0.74). PF, PEP, and IMP demonstrated high reliability (r ≥ 0.85). Statistical power for force variables was excellent (power = 1.0), and good for SEMG (power ≥0.86) excluding CON BF (power = 0.57). There was no significant difference (p > 0.05) in CON SEMG between exercises. Eccentric phase SEMG only distinguished between exercises involving a landing and those that did not (percentage of maximal voluntary isometric contraction [%MVIC] = no landing -65 ± 5, landing -140 ± 8). Peak eccentric power, PF, and IMP all distinguished between exercises. In conclusion, CON neuromuscular activity does not appear to vary when intent is maximal, whereas ECC activity is dependent on the presence of a landing. Force characteristics provide a reliable and sensitive measure enabling precise description of intensity

A Methodological Approach for Assessing Amplified Reflection Distributed Denial of Service on the Internet of Things.

Science.gov (United States)

Costa Gondim, João José; de Oliveira Albuquerque, Robson; Clayton Alves Nascimento, Anderson; García Villalba, Luis Javier; Kim, Tai-Hoon

2016-11-04

Concerns about security on Internet of Things (IoT) cover data privacy and integrity, access control, and availability. IoT abuse in distributed denial of service attacks is a major issue, as typical IoT devices' limited computing, communications, and power resources are prioritized in implementing functionality rather than security features. Incidents involving attacks have been reported, but without clear characterization and evaluation of threats and impacts. The main purpose of this work is to methodically assess the possible impacts of a specific class-amplified reflection distributed denial of service attacks (AR-DDoS)-against IoT. The novel approach used to empirically examine the threat represented by running the attack over a controlled environment, with IoT devices, considered the perspective of an attacker. The methodology used in tests includes that perspective, and actively prospects vulnerabilities in computer systems. This methodology defines standardized procedures for tool-independent vulnerability assessment based on strategy, and the decision flows during execution of penetration tests (pentests). After validation in different scenarios, the methodology was applied in amplified reflection distributed denial of service (AR-DDoS) attack threat assessment. Results show that, according to attack intensity, AR-DDoS saturates reflector infrastructure. Therefore, concerns about AR-DDoS are founded, but expected impact on abused IoT infrastructure and devices will be possibly as hard as on final victims.

A Methodological Approach for Assessing Amplified Reflection Distributed Denial of Service on the Internet of Things

Directory of Open Access Journals (Sweden)

João José Costa Gondim

2016-11-01

Full Text Available Concerns about security on Internet of Things (IoT cover data privacy and integrity, access control, and availability. IoT abuse in distributed denial of service attacks is a major issue, as typical IoT devices’ limited computing, communications, and power resources are prioritized in implementing functionality rather than security features. Incidents involving attacks have been reported, but without clear characterization and evaluation of threats and impacts. The main purpose of this work is to methodically assess the possible impacts of a specific class–amplified reflection distributed denial of service attacks (AR-DDoS–against IoT. The novel approach used to empirically examine the threat represented by running the attack over a controlled environment, with IoT devices, considered the perspective of an attacker. The methodology used in tests includes that perspective, and actively prospects vulnerabilities in computer systems. This methodology defines standardized procedures for tool-independent vulnerability assessment based on strategy, and the decision flows during execution of penetration tests (pentests. After validation in different scenarios, the methodology was applied in amplified reflection distributed denial of service (AR-DDoS attack threat assessment. Results show that, according to attack intensity, AR-DDoS saturates reflector infrastructure. Therefore, concerns about AR-DDoS are founded, but expected impact on abused IoT infrastructure and devices will be possibly as hard as on final victims.

A Methodological Approach for Assessing Amplified Reflection Distributed Denial of Service on the Internet of Things

Science.gov (United States)

Costa Gondim, João José; de Oliveira Albuquerque, Robson; Clayton Alves Nascimento, Anderson; García Villalba, Luis Javier; Kim, Tai-Hoon

2016-01-01

Concerns about security on Internet of Things (IoT) cover data privacy and integrity, access control, and availability. IoT abuse in distributed denial of service attacks is a major issue, as typical IoT devices’ limited computing, communications, and power resources are prioritized in implementing functionality rather than security features. Incidents involving attacks have been reported, but without clear characterization and evaluation of threats and impacts. The main purpose of this work is to methodically assess the possible impacts of a specific class–amplified reflection distributed denial of service attacks (AR-DDoS)–against IoT. The novel approach used to empirically examine the threat represented by running the attack over a controlled environment, with IoT devices, considered the perspective of an attacker. The methodology used in tests includes that perspective, and actively prospects vulnerabilities in computer systems. This methodology defines standardized procedures for tool-independent vulnerability assessment based on strategy, and the decision flows during execution of penetration tests (pentests). After validation in different scenarios, the methodology was applied in amplified reflection distributed denial of service (AR-DDoS) attack threat assessment. Results show that, according to attack intensity, AR-DDoS saturates reflector infrastructure. Therefore, concerns about AR-DDoS are founded, but expected impact on abused IoT infrastructure and devices will be possibly as hard as on final victims. PMID:27827931

Examining emotional expressions in discourse: methodological considerations

Science.gov (United States)

Hufnagel, Elizabeth; Kelly, Gregory J.

2017-10-01

This methodological paper presents an approach for examining emotional expressions through discourse analysis and ethnographic methods. Drawing on trends in the current literature in science education, we briefly explain the importance of emotions in science education and examine the current research methodologies used in interactional emotion studies. We put forth and substantiate a methodological approach that attends to the interactional, contextual, intertextual, and consequential aspects of emotional expressions. By examining emotional expressions in the discourse in which they are constructed, emotional expressions are identified through semantics, contextualization, and linguistic features. These features make salient four dimensions of emotional expressions: aboutness, frequency, type, and ownership. Drawing on data from a large empirical study of pre-service elementary teachers' emotional expressions about climate change in a science course, we provide illustrative examples to describe what counts as emotional expressions in situ. In doing so we explain how our approach makes salient the nuanced nature of such expressions as well as the broader discourse in which they are constructed and the implications for researching emotional expressions in science education discourse. We suggest reasons why this discourse orientated research methodology can contribute to the interactional study of emotions in science education contexts.

Quantitative vs. qualitative approaches to the electronic structure of solids

International Nuclear Information System (INIS)

Oliva, J.M.; Llunell, Miquel; Alemany, Pere; Canadell, Enric

2003-01-01

The usefulness of qualitative and quantitative theoretical approaches in solid state chemistry is discussed by considering three different types of problems: (a) the distribution of boron and carbon atoms in MB 2 C 2 (M=Ca, La, etc.) phases, (b) the band structure and Fermi surface of low-dimensional transition metal oxides and bronzes, and (c) the correlation between the crystal and electronic structure of the ternary nitride Ca 2 AuN

Design Methodology - Design Synthesis

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

2003-01-01

Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

METHODOLOGICAL APPROACHES TO THE ANALYSIS OF EFFICIENCY OF CASH FLOW MANAGEMENT IN INVESTMENT ACTIVITY OF THE ENTERPRISES

OpenAIRE

I. Magdych

2015-01-01

The article explores the methodological approaches to the analysis of cash flows in investment activity of the enterprise; the system of motion net cash flows, reflecting the impact of cash management efficiency on the amount and source of investment cash flows of the enterprise; analytical model of definition of effectiveness of cash management of the enterprise is proposed, based on the selected principals of modeling, comprehensive analysis of cash flows in investing activities and their o...

Reconstructing Regional Ionospheric Electron Density: A Combined Spherical Slepian Function and Empirical Orthogonal Function Approach

Science.gov (United States)

Farzaneh, Saeed; Forootan, Ehsan

2018-03-01

The computerized ionospheric tomography is a method for imaging the Earth's ionosphere using a sounding technique and computing the slant total electron content (STEC) values from data of the global positioning system (GPS). The most common approach for ionospheric tomography is the voxel-based model, in which (1) the ionosphere is divided into voxels, (2) the STEC is then measured along (many) satellite signal paths, and finally (3) an inversion procedure is applied to reconstruct the electron density distribution of the ionosphere. In this study, a computationally efficient approach is introduced, which improves the inversion procedure of step 3. Our proposed method combines the empirical orthogonal function and the spherical Slepian base functions to describe the vertical and horizontal distribution of electron density, respectively. Thus, it can be applied on regional and global case studies. Numerical application is demonstrated using the ground-based GPS data over South America. Our results are validated against ionospheric tomography obtained from the constellation observing system for meteorology, ionosphere, and climate (COSMIC) observations and the global ionosphere map estimated by international centers, as well as by comparison with STEC derived from independent GPS stations. Using the proposed approach, we find that while using 30 GPS measurements in South America, one can achieve comparable accuracy with those from COSMIC data within the reported accuracy (1 × 1011 el/cm3) of the product. Comparisons with real observations of two GPS stations indicate an absolute difference is less than 2 TECU (where 1 total electron content unit, TECU, is 1016 electrons/m2).

Eikonal approach to the atomic break-up process by polarized electrons

International Nuclear Information System (INIS)

Onaga, Tomohide

1992-01-01

The cross section asymmetry for ionization of hydrogen atoms by electron impact is analysed in the eikonal approach. A new formulation is given for the evaluation of the exchange amplitude up to higher partial Coulomb waves. It is concluded that the cross section asymmetry gives an important criterion or interesting test of validity of approximation methods with the exchange effect. (author)

Hybridization approach to in-line and off-axis (electron) holography for superior resolution and phase sensitivity

Science.gov (United States)

Ozsoy-Keskinbora, C.; Boothroyd, C. B.; Dunin-Borkowski, R. E.; van Aken, P. A.; Koch, C. T.

2014-01-01

Holography - originally developed for correcting spherical aberration in transmission electron microscopes - is now used in a wide range of disciplines that involve the propagation of waves, including light optics, electron microscopy, acoustics and seismology. In electron microscopy, the two primary modes of holography are Gabor's original in-line setup and an off-axis approach that was developed subsequently. These two techniques are highly complementary, offering superior phase sensitivity at high and low spatial resolution, respectively. All previous investigations have focused on improving each method individually. Here, we show how the two approaches can be combined in a synergetic fashion to provide phase information with excellent sensitivity across all spatial frequencies, low noise and an efficient use of electron dose. The principle is also expected to be widely to applications of holography in light optics, X-ray optics, acoustics, ultra-sound, terahertz imaging, etc. PMID:25387480

Developing "Personality" Taxonomies: Metatheoretical and Methodological Rationales Underlying Selection Approaches, Methods of Data Generation and Reduction Principles.

Science.gov (United States)

Uher, Jana

2015-12-01

Taxonomic "personality" models are widely used in research and applied fields. This article applies the Transdisciplinary Philosophy-of-Science Paradigm for Research on Individuals (TPS-Paradigm) to scrutinise the three methodological steps that are required for developing comprehensive "personality" taxonomies: 1) the approaches used to select the phenomena and events to be studied, 2) the methods used to generate data about the selected phenomena and events and 3) the reduction principles used to extract the "most important" individual-specific variations for constructing "personality" taxonomies. Analyses of some currently popular taxonomies reveal frequent mismatches between the researchers' explicit and implicit metatheories about "personality" and the abilities of previous methodologies to capture the particular kinds of phenomena toward which they are targeted. Serious deficiencies that preclude scientific quantifications are identified in standardised questionnaires, psychology's established standard method of investigation. These mismatches and deficiencies derive from the lack of an explicit formulation and critical reflection on the philosophical and metatheoretical assumptions being made by scientists and from the established practice of radically matching the methodological tools to researchers' preconceived ideas and to pre-existing statistical theories rather than to the particular phenomena and individuals under study. These findings raise serious doubts about the ability of previous taxonomies to appropriately and comprehensively reflect the phenomena towards which they are targeted and the structures of individual-specificity occurring in them. The article elaborates and illustrates with empirical examples methodological principles that allow researchers to appropriately meet the metatheoretical requirements and that are suitable for comprehensively exploring individuals' "personality".

The Methodological Dynamism of Grounded Theory

Directory of Open Access Journals (Sweden)

Nicholas Ralph

2015-11-01

Full Text Available Variations in grounded theory (GT interpretation are the subject of ongoing debate. Divergences of opinion, genres, approaches, methodologies, and methods exist, resulting in disagreement on what GT methodology is and how it comes to be. From the postpositivism of Glaser and Strauss, to the symbolic interactionist roots of Strauss and Corbin, through to the constructivism of Charmaz, the field of GT methodology is distinctive in the sense that those using it offer new ontological, epistemological, and methodological perspectives at specific moments in time. We explore the unusual dynamism attached to GT’s underpinnings. Our view is that through a process of symbolic interactionism, in which generations of researchers interact with their context, moments are formed and philosophical perspectives are interpreted in a manner congruent with GT’s essential methods. We call this methodological dynamism, a process characterized by contextual awareness and moment formation, contemporaneous translation, generational methodology, and methodological consumerism.

THEORETICAL AND METHODOLOGICAL APPROACHES TO REGIONAL COMPETITION INVESTIGATION

Directory of Open Access Journals (Sweden)

A.I. Tatarkin

2006-03-01

Full Text Available The article is dedicated to theoretical-methodological issues of regional economy competitiveness investigation. Economic essence of regional competitiveness is analyzed, its definition is given. The factors that determine relations of competition on medium and macrolevels are proved. The basic differences between world-economical and inter-regional communications are formulated. The specific features of globalization processes as form of competitive struggle are considered.

Grounded Theory Methodology: Positivism, Hermeneutics, and Pragmatism

Science.gov (United States)

Age, Lars-Johan

2011-01-01

Glaserian grounded theory methodology, which has been widely adopted as a scientific methodology in recent decades, has been variously characterised as "hermeneutic" and "positivist." This commentary therefore takes a different approach to characterising grounded theory by undertaking a comprehensive analysis of: (a) the philosophical paradigms of…

A real-space stochastic density matrix approach for density functional electronic structure.

Science.gov (United States)

Beck, Thomas L

2015-12-21

The recent development of real-space grid methods has led to more efficient, accurate, and adaptable approaches for large-scale electrostatics and density functional electronic structure modeling. With the incorporation of multiscale techniques, linear-scaling real-space solvers are possible for density functional problems if localized orbitals are used to represent the Kohn-Sham energy functional. These methods still suffer from high computational and storage overheads, however, due to extensive matrix operations related to the underlying wave function grid representation. In this paper, an alternative stochastic method is outlined that aims to solve directly for the one-electron density matrix in real space. In order to illustrate aspects of the method, model calculations are performed for simple one-dimensional problems that display some features of the more general problem, such as spatial nodes in the density matrix. This orbital-free approach may prove helpful considering a future involving increasingly parallel computing architectures. Its primary advantage is the near-locality of the random walks, allowing for simultaneous updates of the density matrix in different regions of space partitioned across the processors. In addition, it allows for testing and enforcement of the particle number and idempotency constraints through stabilization of a Feynman-Kac functional integral as opposed to the extensive matrix operations in traditional approaches.

A design methodology for unattended monitoring systems

International Nuclear Information System (INIS)

SMITH, JAMES D.; DELAND, SHARON M.

2000-01-01

The authors presented a high-level methodology for the design of unattended monitoring systems, focusing on a system to detect diversion of nuclear materials from a storage facility. The methodology is composed of seven, interrelated analyses: Facility Analysis, Vulnerability Analysis, Threat Assessment, Scenario Assessment, Design Analysis, Conceptual Design, and Performance Assessment. The design of the monitoring system is iteratively improved until it meets a set of pre-established performance criteria. The methodology presented here is based on other, well-established system analysis methodologies and hence they believe it can be adapted to other verification or compliance applications. In order to make this approach more generic, however, there needs to be more work on techniques for establishing evaluation criteria and associated performance metrics. They found that defining general-purpose evaluation criteria for verifying compliance with international agreements was a significant undertaking in itself. They finally focused on diversion of nuclear material in order to simplify the problem so that they could work out an overall approach for the design methodology. However, general guidelines for the development of evaluation criteria are critical for a general-purpose methodology. A poor choice in evaluation criteria could result in a monitoring system design that solves the wrong problem

Methodological remarks on studying prehistoric Greek religion

Directory of Open Access Journals (Sweden)

Petra Pakkanen

1999-01-01

Full Text Available This paper presents a methodological approach to the study of Greek religion of the period which lacks written documents, i.e. prehistory. The assumptions and interpretations of religion of that time have to be based on archaeological material. How do we define religion and cultic activity on the basis of primary archaeological material from this period, and which are the methodological tools for this difficult task? By asking questions on the nature and definition of religion and culture scholars of religion have provided us with some methodological apparatus to approach religion of the past in general, but there are models developed by archaeologists as well. Critical combination of these methodological tools leads to the best possible result. Archaeology studies the material culture of the past. History of religion studies the spiritual culture of the past. In the background the two have important theoretical and even philosophical speculations since they both deal with meanings (of things or practices and with interpretation.

Purchasing Consortia and Electronic Markets: a Procurement Direction in Integrated Supply Chain Management

OpenAIRE

Huber, Bernd; Sweeney, Edward; Smyth, Austin

2004-01-01

In supply chain management literature, there has been little empirical research investigation on purchasing consortium issues focusing on a detailed analysis of information and communication (ICT) based procurement strategies. Based on the exploration of academic literature and two surveys among purchasing organisations as well as e-Marketplaces / procurement service providers (PSPs) in the automotive and electronics industry sectors, the research methodology follows a positivistic approach i...

Changing methodologies in TESOL

CERN Document Server

Spiro, Jane

2013-01-01

Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

Nanotubule and Tour Molecule Based Molecular Electronics: Suggestion for a Hybrid Approach

Science.gov (United States)

Srivastava, Deepak; Saini, Subhash (Technical Monitor)

1998-01-01

Recent experimental and theoretical attempts and results indicate two distinct broad pathways towards future molecular electronic devices and architectures. The first is the approach via Tour type ladder molecules and their junctions which can be fabricated with solution phase chemical approaches. Second are fullerenes or nanotubules and their junctions which may have better conductance, switching and amplifying characteristics but can not be made through well controlled and defined chemical means. A hybrid approach combining the two pathways to take advantage of the characteristics of both is suggested. Dimension and scale of such devices would be somewhere in between isolated molecule and nanotubule based devices but it maybe possible to use self-assembly towards larger functional and logicalunits.

Methodology is more than research design and technology.

Science.gov (United States)

Proctor, Robert W

2005-05-01

The Society for Computers in Psychology has been at the forefront of disseminating information about advances in computer technology and their applications for psychologists. Although technological advances, as well as clean research designs, are key contributors to progress in psychological research, the justification of methodological rules for interpreting data and making theory choices is at least as important. Historically, methodological beliefs and practices have been justified through intuition and logic, an approach known as foundationism. However, naturalism, a modern approach in the philosophy of science inspired by the work of Thomas S. Kuhn, indicates that all aspects of scientific practice, including its methodology, should be evaluated empirically. This article examines implications of the naturalistic approach for psychological research methods in general and for the current debate that is often framed as one of qualitative versus quantitative methods.

Consistent quantum approach to new laser-electron-nuclear effects in diatomic molecules

International Nuclear Information System (INIS)

Glushkov, A V; Malinovskaya, S V; Loboda, A V; Shpinareva, I M; Prepelitsa, G P

2006-01-01

We present a consistent, quantum approach to the calculation of electron-nuclear γ. spectra (set of vibrational and rotational satellites) for nuclei in diatomic molecules. The approach generelizes the well known Letokhov-Minogin model and is based on the Dunham model potential approximation for potential curves of diatomic molecules. The method is applied to the calculation of probabilities of the vibration-rotation-nuclear transitions in a case of emission and absorption spectrum for the nucleus 127 I (E γ (0) = 203 keV) linked with the molecule H 127 I

Discipline and Methodology in Higher Education Research

Science.gov (United States)

Tight, Malcolm

2013-01-01

Higher education research is a multidisciplinary field, engaging researchers from across the academy who make use of a wide range of methodological approaches. This article examines the relation between discipline and methodology in higher education research, analysing a database of 567 articles published in 15 leading higher education journals…

Soft System Methodology as a Tool to Understand Issues of Governmental Affordable Housing Programme of India: A Case Study Approach

Science.gov (United States)

Ghosh, Sukanya; Roy, Souvanic; Sanyal, Manas Kumar

2016-09-01

With the help of a case study, the article has explored current practices of implementation of governmental affordable housing programme for urban poor in a slum of India. This work shows that the issues associated with the problems of governmental affordable housing programme has to be addressed to with a suitable methodology as complexities are not only dealing with quantitative data but qualitative data also. The Hard System Methodologies (HSM), which is conventionally applied to address the issues, deals with real and known problems which can be directly solved. Since most of the issues of affordable housing programme as found in the case study are subjective and complex in nature, Soft System Methodology (SSM) has been tried for better representation from subjective points of views. The article explored drawing of Rich Picture as an SSM approach for better understanding and analysing complex issues and constraints of affordable housing programme so that further exploration of the issues is possible.

What the Current System Development Trends tell us about Systems Development Methodologies: Toward explaining SSDAM, Agile and IDEF0 Methodologies

Directory of Open Access Journals (Sweden)

Abdulla F. Ally

2015-03-01

Full Text Available Systems integration, customization and component based development approach are of increasing attention. This trend facilitates the research attention to also focus on systems development methodologies. The availability of systems development tools, rapid change in technologies, evolution of mobile computing and the growth of cloud computing have necessitated a move toward systems integration and customization rather than developing systems from scratch. This tendency encourages component based development and discourages traditional systems development approach. The paper presents and evaluates SSADM, IDEF0 and Agile systems development methodologies. More specifically, it examines how they fit or not fit into the current competitive market of systems development. In the view of this perspective, it is anticipated that despite of its popularity, SSADM methodology is becoming obsolete while Agile and IDEF0 methodologies are still gaining acceptance in the current competitive market of systems development. The present study more likely enrich our understanding of the systems development methodologies concepts and draw attention regarding where the current trends in system development are heading.

Methodological considerations for economic modelling of latent tuberculous infection screening in migrants.

Science.gov (United States)

Shedrawy, J; Siroka, A; Oxlade, O; Matteelli, A; Lönnroth, K

2017-09-01

Tuberculosis (TB) in migrants from endemic to low-incidence countries results mainly from the reactivation of latent tuberculous infection (LTBI). LTBI screening policies for migrants vary greatly between countries, and the evidence on the cost-effectiveness of the different approaches is weak and heterogeneous. The aim of this review was to assess the methodology used in published economic evaluations of LTBI screening among migrants to identify critical methodological options that must be considered when using modelling to determine value for money from different economic perspectives. Three electronic databases were searched and 10 articles were included. There was considerable variation across this small number of studies with regard to economic perspective, main outcomes, modelling technique, screening options and target populations considered, as well as in parameterisation of the epidemiological situation, test accuracy, efficacy, safety and programme performance. Only one study adopted a societal perspective; others adopted a health care or wider government perspective. Parameters representing the cascade of screening and treating LTBI varied widely, with some studies using highly aspirational scenarios. This review emphasises the need for a more harmonised approach for economic analysis, and better transparency in how policy options and economic perspectives influence methodological choices. Variability is justifiable for some parameters. However, sufficient data are available to standardise others. A societal perspective is ideal, but can be challenging due to limited data. Assumptions about programme performance should be based on empirical data or at least realistic assumptions. Results should be interpreted within specific contexts and policy options, with cautious generalisations.

Plasticity: A New Materialist Approach to Policy and Methodology

Science.gov (United States)

Ulmer, Jasmine B.

2015-01-01

This article examines Catherine Malabou's philosophical concept of plasticity as a new materialist methodology. Given that plasticity simultaneously maintains the ability to receive, give, and annihilate form, plasticity and plastic readings offer material-discursive possibilities for educational research. This article begins by discussing the…

M&A Performance and Economic Impact: Integration and Critical Assessment of Methodological Approach

Directory of Open Access Journals (Sweden)

Karolis Andriuskevicius

2017-11-01

Full Text Available Purpose of the article: Existing methodologies employed within the M&A performance framework are investigated and critically discuss. Methodology/methods: The research has been carried out as a structured assessment of past literature. The findings from scientific articles and studies by various scholars have been categorized, grouped and summarized to discern a meta-analytic view of the work carried out to date. Scientific aim: The conducted research seeks to ascertain and evaluate theoretically existing methodologies used in empirical studies that would allow proper and critical understanding of the results of various findings in the holistic and global M&As area. Findings: The research elaborates on several key developments in M&A methodology and performance studies carried out in empirical works during the last two decades. The findings help to independently and objectively assess performance of M&A from a holistic perspective. Conclusions: Each methodology measuring either M&A performance on a corporate level or effects of M&A on the economy level shall be interpreted and relied on with caution as each of them dispose their limitations whereas application of these methodologies is subject to data availability and case specific.

Correlated nuclear and electronic dynamics in photoionized systems studied by quantum and mixed quantum-classical approaches

International Nuclear Information System (INIS)

Li, Zheng

2014-09-01

The advent of free electron lasers and high harmonic sources enables the investigation of electronic and nuclear dynamics of molecules and solids with atomic spatial resolution and femtosecond/attosecond time resolution, using bright and ultrashort laser pulses of frequency from terahertz to hard x-ray range. With the help of ultrashort laser pulses, the nuclear and electronic dynamics can be initiated, monitored and actively controlled at the typical time scale in the femtosecond to attosecond realm. Meanwhile, theoretical tools are required to describe the underlying mechanism. This doctoral thesis focuses on the development of theoretical tools based on full quantum mechanical multiconfiguration time-dependent Hartree (MCTDH) and mixed quantum classical approaches, which can be applied to describe the dynamical behavior of gas phase molecules and strongly correlated solids in the presence of ultrashort laser pulses. In the first part of this thesis, the focus is on the motion of electron holes in gas phase molecular ions created by extreme ultraviolet (XUV) photoionization and watched by spectroscopic approaches. The XUV photons create electron-hole in the valence orbitals of molecules by photoionization, the electron hole, as a positively charged quasi-particle, can then interact with the nuclei and the rest of electrons, leading to coupled non-Born-Oppenheimer dynamics. I present our study on electron-hole relaxation dynamics in valence ionized molecular ions of moderate size, using quantum wave packet and mixed quantum-classical approaches, using photoionized [H + (H 2 O) n ] + molecular ion as example. We have shown that the coupled motion of the electron-hole and the nuclei can be mapped out with femtosecond resolution by core-level x-ray transient absorption spectroscopy. Furthermore, in specific cases, the XUV photon can create a coherent electron hole, that can maintain its coherence to time scales of ∝ 1 picosecond. Employing XUV pump - IR probe

[The general methodological approaches identifying strategic positions in developing healthy lifestyle of population].

Science.gov (United States)

Dorofeev, S B; Babenko, A I

2017-01-01

The article deals with analysis of national and international publications concerning methodological aspects of elaborating systematic approach to healthy life-style of population. This scope of inquiry plays a key role in development of human capital. The costs related to healthy life-style are to be considered as personal investment into future income due to physical incrementation of human capital. The definitions of healthy life-style, its categories and supportive factors are to be considered in the process of development of strategies and programs of healthy lifestyle. The implementation of particular strategies entails application of comprehensive information and educational programs meant for various categories of population. Therefore, different motivation techniques are to be considered for children, adolescents, able-bodied population, the elderly. This approach is to be resulted in establishing particular responsibility for national government, territorial administrations, health care administrations, employers and population itself. The necessity of complex legislative measures is emphasized. The recent social hygienic studies were focused mostly on particular aspects of development of healthy life-style of population. Hence, the demand for long term exploration of development of organizational and functional models implementing medical preventive measures on the basis of comprehensive information analysis using statistical, sociological and professional expertise.

A methodological systematic review of what's wrong with meta-ethnography reporting.

Science.gov (United States)

France, Emma F; Ring, Nicola; Thomas, Rebecca; Noyes, Jane; Maxwell, Margaret; Jepson, Ruth

2014-11-19

Syntheses of qualitative studies can inform health policy, services and our understanding of patient experience. Meta-ethnography is a systematic seven-phase interpretive qualitative synthesis approach well-suited to producing new theories and conceptual models. However, there are concerns about the quality of meta-ethnography reporting, particularly the analysis and synthesis processes. Our aim was to investigate the application and reporting of methods in recent meta-ethnography journal papers, focusing on the analysis and synthesis process and output. Methodological systematic review of health-related meta-ethnography journal papers published from 2012-2013. We searched six electronic databases, Google Scholar and Zetoc for papers using key terms including 'meta-ethnography.' Two authors independently screened papers by title and abstract with 100% agreement. We identified 32 relevant papers. Three authors independently extracted data and all authors analysed the application and reporting of methods using content analysis. Meta-ethnography was applied in diverse ways, sometimes inappropriately. In 13% of papers the approach did not suit the research aim. In 66% of papers reviewers did not follow the principles of meta-ethnography. The analytical and synthesis processes were poorly reported overall. In only 31% of papers reviewers clearly described how they analysed conceptual data from primary studies (phase 5, 'translation' of studies) and in only one paper (3%) reviewers explicitly described how they conducted the analytic synthesis process (phase 6). In 38% of papers we could not ascertain if reviewers had achieved any new interpretation of primary studies. In over 30% of papers seminal methodological texts which could have informed methods were not cited. We believe this is the first in-depth methodological systematic review of meta-ethnography conduct and reporting. Meta-ethnography is an evolving approach. Current reporting of methods, analysis and

A methodology for development of biocatalytic processes

DEFF Research Database (Denmark)

Lima Ramos, Joana

are available. The first case study presents a rational approach for defining a development strategy for multi-enzymatic processes. The proposed methodology requires a profound and structured knowledge of the multi-enzyme systems, integrating chemistry, biological and process engineering. In order to suggest......). These process metrics can often be attained by improvements in the reaction chemistry, the biocatalyst, and/or by process engineering, which often requires a complex process development strategy. Interestingly this complexity, which arises from the need for integration of biological and process technologies...... and their relationship with the overall process is not clear.The work described in this thesis presents a methodological approach for early stage development of biocatalytic processes, understanding and dealing with the reaction, biocatalyst and process constraints. When applied, this methodology has a decisive role...

Diagnostics of the Enterprise Participation in Electronic Public Procurement: the Aspect of Logistics Management

Directory of Open Access Journals (Sweden)

Klyuvak Oksana V.

2017-03-01

Full Text Available The aim of the article is to formulate and develop the theoretical and methodological foundations for the functioning of the electronic public procurement system in the logistic environment and develop an approach to determining the level of enterprise readiness for participation in electronic public procurement based on the logistic management of information, financial, information and financial flows, document flows, flows of goods, flows of work and services. The classification of groups of temporary, quantitative, qualitative, cost, technical and technological indicators as well as indicators of the level of readiness of the electronic public procurement system at the macro- and microlevels is proposed. It is recommended to consider the readiness to participate in electronic public procurement and the effectiveness of fulfilling obligations to the customer after the completion of the tender process to be the key indicators for the enterprise. There developed an approach to determining the level of enterprise readiness for participation in electronic public procurement on the basis of a set of criteria related to management of information logistics systems, financial logistics, information and financial logistics, document management, commodity logistics, logistics services and works. Prospects for further research in this direction are development of an approach to financial and economic analysis and evaluation of the effectiveness of the tender security mechanism in the system of electronic public procurement in Ukraine and countries of the European Union.

Methodological approaches based on business rules

Directory of Open Access Journals (Sweden)

Anca Ioana ANDREESCU

2008-01-01

Full Text Available Business rules and business processes are essential artifacts in defining the requirements of a software system. Business processes capture business behavior, while rules connect processes and thus control processes and business behavior. Traditionally, rules are scattered inside application code. This approach makes it very difficult to change rules and shorten the life cycle of the software system. Because rules change more quickly than the application itself, it is desirable to externalize the rules and move them outside the application. This paper analyzes and evaluates three well-known business rules approaches. It also outlines some critical factors that have to be taken into account in the decision to introduce business rules facilities in a software system. Based on the concept of explicit manipulation of business rules in a software system, the need for a general approach based on business rules is discussed.

USGS Methodology for Assessing Continuous Petroleum Resources

Science.gov (United States)

Charpentier, Ronald R.; Cook, Troy A.

2011-01-01

The U.S. Geological Survey (USGS) has developed a new quantitative methodology for assessing resources in continuous (unconventional) petroleum deposits. Continuous petroleum resources include shale gas, coalbed gas, and other oil and gas deposits in low-permeability ("tight") reservoirs. The methodology is based on an approach combining geologic understanding with well productivities. The methodology is probabilistic, with both input and output variables as probability distributions, and uses Monte Carlo simulation to calculate the estimates. The new methodology is an improvement of previous USGS methodologies in that it better accommodates the uncertainties in undrilled or minimally drilled deposits that must be assessed using analogs. The publication is a collection of PowerPoint slides with accompanying comments.

A Dictionary Approach to Electron Backscatter Diffraction Indexing.

Science.gov (United States)

Chen, Yu H; Park, Se Un; Wei, Dennis; Newstadt, Greg; Jackson, Michael A; Simmons, Jeff P; De Graef, Marc; Hero, Alfred O

2015-06-01

We propose a framework for indexing of grain and subgrain structures in electron backscatter diffraction patterns of polycrystalline materials. We discretize the domain of a dynamical forward model onto a dense grid of orientations, producing a dictionary of patterns. For each measured pattern, we identify the most similar patterns in the dictionary, and identify boundaries, detect anomalies, and index crystal orientations. The statistical distribution of these closest matches is used in an unsupervised binary decision tree (DT) classifier to identify grain boundaries and anomalous regions. The DT classifies a pattern as an anomaly if it has an abnormally low similarity to any pattern in the dictionary. It classifies a pixel as being near a grain boundary if the highly ranked patterns in the dictionary differ significantly over the pixel's neighborhood. Indexing is accomplished by computing the mean orientation of the closest matches to each pattern. The mean orientation is estimated using a maximum likelihood approach that models the orientation distribution as a mixture of Von Mises-Fisher distributions over the quaternionic three sphere. The proposed dictionary matching approach permits segmentation, anomaly detection, and indexing to be performed in a unified manner with the additional benefit of uncertainty quantification.

Formation of the methodological matrix of the strategic analysis of the enterprise

Directory of Open Access Journals (Sweden)

N.H. Vygovskaya

2018-04-01

Full Text Available The article is devoted to the study of the methodological matrix of the strategic analysis of the enterprise. The aim of this article is to analyze the influence of methodological changes in the 20th century on the methodology of strategic analysis; critical assessment and generalization of scientific approaches to its methods. Evaluation of scientific works on analysis made it possible to identify such problems in the methodology of strategic analysis as the lack of consideration of the features of strategic analysis in the formation of its methods, which often leads to confusion of methods of financial (economic, thrifty analysis; failure to use the fact that the strategic analysis contains, besides the methods of analyzing the internal and external environment, the methods of forecast analysis aimed at forming the strategy for the development of the enterprise; identification of the concepts «image», «reception», «method» of analysis; multidirectionality and indistinctness of signs of classification of methods of strategic analysis; blind copying of foreign methods of application of techniques and methods of strategic analysis without taking into account the specifics of domestic economic conditions. The expediency of using the system approach in forming the methodological design of strategic analysis is proved, which will allow to combine the methodology as a science of methods (a broad approach to the methods of strategic analysis with methodology as a set of applied methods and methods of analysis (narrow approach to methodology. The use of the system approach allowed to distinguish three levels of the methodology of strategic analysis. The first and second levels of methodology correspond to the level of science, the third level – the practice. When developing the third level of special methods of strategic analysis, an approach is applied that differentiates them depending on the stages of strategic analysis (methods of the stage

A top-down system engineering approach as an alternative to the tradiotinal over-the-bench methodology for the design of a building

NARCIS (Netherlands)

Bluyssen, P.M.; Oostra, M.A.R.; Böhms, H.M.

2010-01-01

The traditional over-the-bench methodology for the design of a building is resulting in failure costs, failures at delivery and severe problems. An interactive top-down approach is required, both for the communication process necessary to facilitate the design, construction, maintenance and

Pseudogap in the Eliashberg approach based on electron-phonon and electron-electron-phonon interaction

Energy Technology Data Exchange (ETDEWEB)

Szczesniak, R. [Institute of Physics, Czestochowa University of Technology (Poland); Institute of Physics, Jan Dlugosz University in Czestochowa (Poland); Durajski, A.P.; Duda, A.M. [Institute of Physics, Czestochowa University of Technology (Poland)

2017-04-15

The properties of the superconducting and the anomalous normal state were described by using the Eliashberg method. The pairing mechanism was reproduced with the help of the Hamiltonian, which models the electron-phonon and the electron-electron-phonon interaction (EEPh). The set of the Eliashberg equations, which determines the order parameter function (φ), the wave function renormalization factor (Z), and the energy shift function (χ), was derived. It was proven that for the sufficiently large values of the EEPh potential, the doping dependence of the order parameter (φ/Z) has the analogous course to that observed experimentally in cuprates. The energy gap in the electron density of states is induced by Z and χ - the contribution from φ is negligible. The electron density of states possesses the characteristic asymmetric form and the pseudogap is observed above the critical temperature. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Theoretical and methodological approaches to economic competitiveness (Part I

Directory of Open Access Journals (Sweden)

Macari Vadim

2013-01-01

Full Text Available The article is based on study of several representative bibliographical sources,it is tried to examine, to order from logical and scientific point of view some of the most common theoretical and methodological understandings of the essence, definition, phenomenon, types, haracteristics and indices of economic competitiveness.

Theoretical and methodological approaches to economic competitiveness (part II

Directory of Open Access Journals (Sweden)

Macari Vadim

2013-02-01

Full Text Available This article, on the basis of the study of many representative bibliographic sources, examines and tries to order from logical and scientific point of view some of the most common theoretical and methodological treatments of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

THEORETICAL AND METHODOLOGICAL APPROACHES TO ECONOMIC COMPETITIVENESS (Part II

Directory of Open Access Journals (Sweden)

Vadim MACARI

2013-02-01

Full Text Available This article, on the basis of the study of many representative bibliographic sources, examines and tries to order from logical and scientific point of view some of the most common theoretical and methodological treatments of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

THEORETICAL AND METHODOLOGICAL APPROACHES TO ECONOMIC COMPETITIVENESS (Part I

Directory of Open Access Journals (Sweden)

Vadim MACARI

2013-01-01

Full Text Available The article is based on study of several representative bibliographical sources,it is tried to examine, to order from logical and scientific point of view some of the most common theoretical and methodological understandings of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

Three-dimensional structural analysis of eukaryotic flagella/cilia by electron cryo-tomography

International Nuclear Information System (INIS)

Bui, Khanh Huy; Pigino, Gaia; Ishikawa, Takashi

2011-01-01

Based on the molecular architecture revealed by electron cryo-tomography, the mechanism of the bending motion of eukaryotic flagella/cilia is discussed. Electron cryo-tomography is a potential approach to analyzing the three-dimensional conformation of frozen hydrated biological macromolecules using electron microscopy. Since projections of each individual object illuminated from different orientations are merged, electron tomography is capable of structural analysis of such heterogeneous environments as in vivo or with polymorphism, although radiation damage and the missing wedge are severe problems. Here, recent results on the structure of eukaryotic flagella, which is an ATP-driven bending organelle, from green algae Chlamydomonas are presented. Tomographic analysis reveals asymmetric molecular arrangements, especially that of the dynein motor proteins, in flagella, giving insight into the mechanism of planar asymmetric bending motion. Methodological challenges to obtaining higher-resolution structures from this technique are also discussed

The Paradigm of Critical Realism: Approach to an Interdisciplinary Methodology

Directory of Open Access Journals (Sweden)

M. A. Tavana

2015-02-01

Full Text Available The debate of method of recognition in humanities, social and nature science is one of the apprehensions of Scientists in Wisdom Domain –especially in the modern world. This apprehension, before all things was of appearing in the paradigm of methodoligical between the advocates of the paradigms of positivism with having a share of the natural science. They used to values of naturalism in social and human studies. Additionally, testing and observation and repetition are present as the main terms of recognition. In front, the difference between human studies and natural science is important for the advocates of hermeneutic paradigm. Also, they speak about the methodology of interpretation (understanding of human and social phenomenon. But, in the second half of 20th century another paradigms was established as the Critical realism. This paradigm is tried to parther from the methodoloigcal binary and has a share from the recognition of ontological positivism and epistemological hermeneutics attain to a procedure of interdisciplinary about recognition. So, on the basis of this subject, this article mentioned this question that: would the critical realism receive as the methodology in interdisciplinary? Method of the Article is postulate. This article reasoned that multilayer ontology and epistemology redounded to multilayer methodology that could build up the knowledge of interdisciplinary.

Methodology or method? A critical review of qualitative case study reports

Directory of Open Access Journals (Sweden)

Nerida Hyett

2014-05-01

Full Text Available Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12, social sciences and anthropology (n=7, or methods (n=15 case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners.

Methodology or method? A critical review of qualitative case study reports

Science.gov (United States)

Hyett, Nerida; Kenny, Amanda; Dickson-Swift, Virginia

2014-01-01

Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12), social sciences and anthropology (n=7), or methods (n=15) case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners. PMID:24809980

Shelf life of electronic/electrical devices

International Nuclear Information System (INIS)

Polanco, S.; Behera, A.K.

1993-01-01

This paper discusses inconsistencies which exist between various industry practices regarding the determination of shelf life for electrical and electronic components. New methodologies developed to evaluate the shelf life of electrical and electronic components are described and numerous tests performed at Commonwealth Edison Company's Central Receiving Inspection and Testing (CRIT) Facility are presented. Based upon testing and analysis using the Arrhenius methodology and typical materials used in the manufacturing of electrical and electronic components, shelf life of these devices was determined to be indefinite. Various recommendations to achieve an indefinite. Various recommendations to achieve an indefinite shelf life are presented to ultimately reduce inventory and operating costs at nuclear power plants

Managerial Methodology in Public Institutions

Directory of Open Access Journals (Sweden)

Ion VERBONCU

2010-10-01

Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

Evaluating Six Soft Approaches

DEFF Research Database (Denmark)

Sørensen, Lene Tolstrup; Valqui Vidal, René Victor

2008-01-01

's interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable forsupporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology......, Strategic Option Development and Analysis, Strategic Choice Approach and Soft Systems Methodology. Evaluations of each methodology are carried out using a conceptual framework in which the organisation, the result, the process and the technology of the specific approach are taken into consideration. Using...

Evaluating six soft approaches

DEFF Research Database (Denmark)

Sørensen, Lene Tolstrup; Vidal, Rene Victor Valqui

2008-01-01

's interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable forsupporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology......, Strategic Option Development and Analysis, Strategic Choice Approach and Soft Systems Methodology. Evaluations of each methodology are carried out using a conceptual framework in which the organisation, the result, the process and the technology of the specific approach are taken into consideration. Using...

Real-space local polynomial basis for solid-state electronic-structure calculations: A finite-element approach

International Nuclear Information System (INIS)

Pask, J.E.; Klein, B.M.; Fong, C.Y.; Sterne, P.A.

1999-01-01

We present an approach to solid-state electronic-structure calculations based on the finite-element method. In this method, the basis functions are strictly local, piecewise polynomials. Because the basis is composed of polynomials, the method is completely general and its convergence can be controlled systematically. Because the basis functions are strictly local in real space, the method allows for variable resolution in real space; produces sparse, structured matrices, enabling the effective use of iterative solution methods; and is well suited to parallel implementation. The method thus combines the significant advantages of both real-space-grid and basis-oriented approaches and so promises to be particularly well suited for large, accurate ab initio calculations. We develop the theory of our approach in detail, discuss advantages and disadvantages, and report initial results, including electronic band structures and details of the convergence of the method. copyright 1999 The American Physical Society

Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design

International Nuclear Information System (INIS)

Tan, F.L.; Fok, S.C.

2008-01-01

The search and selection for a suitable thermoelectric cooler (TEC) to optimize a cooling system design can be a tedious task as there are many product ranges from several TEC manufacturers. Although the manufacturers do provide proprietary manuals or electronic search facilities for their products, the process is still cumbersome as these facilities are incompatible. The electronic facilities often have different user interfaces and functionalities, while the manual facilities have different presentations of the performance characteristics. This paper presents a methodology to assist the designer to size and select the TECs from different manufacturers. The approach will allow designers to find quickly and to evaluate the devices from different TEC manufacturers. Based on the approach, the article introduces a new operational framework for an Internet based thermoelectric cooling system design process that would promote the interaction and collaboration between the designers and TEC manufacturers. It is hoped that this work would be useful for the advancement of future tools to assist designers to develop, analyze and optimize thermoelectric cooling system design in minimal time using the latest TECs available on the market

Measuring Instruments Control Methodology Performance for Analog Electronics Remote Labs

Directory of Open Access Journals (Sweden)

Unai Hernandez-Jayo

2012-12-01

Full Text Available This paper presents the work that has been developed in parallel to the VISIR project. The objective of this paper is to present the results of the validations processes that have been carried out to check the control methodology. This method has been developed with the aim of being independent of the instruments of the labs.

A multi-modal approach to soft systems methodology

OpenAIRE

Bergvall-Kåreborn, Birgitta

2002-01-01

The main aim of my research is to explore ways of enriching Soft Systems Methodology by developing intellectual tools that can help designers to conceptualise, create and evaluate different design alternatives. This directs the focus on the methodology’s modelling phase even though some ideas related to analysis also will be presented. In order to realize this objective the study proposes the following supplements. Firstly, a framework of 15 modalities (knowledge areas) is suggested as a supp...

Creativity in phenomenological methodology

DEFF Research Database (Denmark)

Dreyer, Pia; Martinsen, Bente; Norlyk, Annelise

2014-01-01

on the methodologies of van Manen, Dahlberg, Lindseth & Norberg, the aim of this paper is to argue that the increased focus on creativity and arts in research methodology is valuable to gain a deeper insight into lived experiences. We illustrate this point through examples from empirical nursing studies, and discuss......Nursing research is often concerned with lived experiences in human life using phenomenological and hermeneutic approaches. These empirical studies may use different creative expressions and art-forms to describe and enhance an embodied and personalised understanding of lived experiences. Drawing...... may support a respectful renewal of phenomenological research traditions in nursing research....

Improving Learning Outcome Using Six Sigma Methodology

Science.gov (United States)

Tetteh, Godson A.

2015-01-01

Purpose: The purpose of this research paper is to apply the Six Sigma methodology to identify the attributes of a lecturer that will help improve a student's prior knowledge of a discipline from an initial "x" per cent knowledge to a higher "y" per cent of knowledge. Design/methodology/approach: The data collection method…

An approach to SOA development methodology: SOUP comparison with RUP and XP

Directory of Open Access Journals (Sweden)

Sandra Svanidzaitė

2014-08-01

Full Text Available Service oriented architecture (SOA is an architecture for distributed applications composed of distributed services with weak coupling that are designed to meet business requirements. One of the research priorities in the field of SOA is creating such software design and development methodology (SDDM that takes into account all principles of this architecture and allows for effective and efficient application development. A lot of investigation has been carried out to find out whether can one of popular SDDM, such as agile methodologies or RUP suits, be adapted for SOA or there is a need to create some new SOA-oriented SDDM. This paper compares one of SOA-oriented SDDM – SOUP – with RUP and XP methodologies. The aim is to find out whether the SOUP methodology is already mature enough to assure successful development of SOA applications. This aim is accomplished by comparing activities, artifacts of SOUP and RUP and emphasizing which XP practices are used in SOUP.DOI: http://dx.doi.org/10.15181/csat.v2i1.77 

Bridging the gap between neurocognitive processing theory and performance validity assessment among the cognitively impaired: a review and methodological approach.

Science.gov (United States)

Leighton, Angela; Weinborn, Michael; Maybery, Murray

2014-10-01

Bigler (2012) and Larrabee (2012) recently addressed the state of the science surrounding performance validity tests (PVTs) in a dialogue highlighting evidence for the valid and increased use of PVTs, but also for unresolved problems. Specifically, Bigler criticized the lack of guidance from neurocognitive processing theory in the PVT literature. For example, individual PVTs have applied the simultaneous forced-choice methodology using a variety of test characteristics (e.g., word vs. picture stimuli) with known neurocognitive processing implications (e.g., the "picture superiority effect"). However, the influence of such variations on classification accuracy has been inadequately evaluated, particularly among cognitively impaired individuals. The current review places the PVT literature in the context of neurocognitive processing theory, and identifies potential methodological factors to account for the significant variability we identified in classification accuracy across current PVTs. We subsequently evaluated the utility of a well-known cognitive manipulation to provide a Clinical Analogue Methodology (CAM), that is, to alter the PVT performance of healthy individuals to be similar to that of a cognitively impaired group. Initial support was found, suggesting the CAM may be useful alongside other approaches (analogue malingering methodology) for the systematic evaluation of PVTs, particularly the influence of specific neurocognitive processing components on performance.

Hot electrons and the approach to metallic behavior in Kx(KCl)1-x

NARCIS (Netherlands)

Silvestrelli, P.L.; Alavi, A.; Parrinello, M.; Frenkel, D.

1996-01-01

The approach to the metallic phase of molten Kx(KCl)1-x mixtures is studied using ab initio molecular dynamics based on finite-temperature density functional theory. The finite electronic temperature is found to result in new and unexpected effects. In particular, we observe a thermally induced

A framework for assessing the adequacy and effectiveness of software development methodologies

Science.gov (United States)

Arthur, James D.; Nance, Richard E.

1990-01-01

Tools, techniques, environments, and methodologies dominate the software engineering literature, but relatively little research in the evaluation of methodologies is evident. This work reports an initial attempt to develop a procedural approach to evaluating software development methodologies. Prominent in this approach are: (1) an explication of the role of a methodology in the software development process; (2) the development of a procedure based on linkages among objectives, principles, and attributes; and (3) the establishment of a basis for reduction of the subjective nature of the evaluation through the introduction of properties. An application of the evaluation procedure to two Navy methodologies has provided consistent results that demonstrate the utility and versatility of the evaluation procedure. Current research efforts focus on the continued refinement of the evaluation procedure through the identification and integration of product quality indicators reflective of attribute presence, and the validation of metrics supporting the measure of those indicators. The consequent refinement of the evaluation procedure offers promise of a flexible approach that admits to change as the field of knowledge matures. In conclusion, the procedural approach presented in this paper represents a promising path toward the end goal of objectively evaluating software engineering methodologies.

Linear-algebraic approach to electron-molecule collisions: General formulation

International Nuclear Information System (INIS)

Collins, L.A.; Schneider, B.I.

1981-01-01

We present a linear-algebraic approach to electron-molecule collisions based on an integral equations form with either logarithmic or asymptotic boundary conditions. The introduction of exchange effects does not alter the basic form or order of the linear-algebraic equations for a local potential. In addition to the standard procedure of directly evaluating the exchange integrals by numerical quadrature, we also incorporate exchange effects through a separable-potential approximation. Efficient schemes are developed for reducing the number of points and channels that must be included. The method is applied at the static-exchange level to a number of molecular systems including H 2 , N 2 , LiH, and CO 2

A new approach in the development of quality management systems for (micro)electronics

Science.gov (United States)

Bacivarov, Ioan C.; Bacivarov, Angelica; Gherghina, Cǎtǎlina

2016-12-01

This paper presents the new approach in the analysis of the Quality Management Systems (QMS) of companies, based on the revised standard ISO 9001:2015. In the first part of the paper, QMS based on ISO 9001 certification are introduced; the changes and the updates proposed for the new version of ISO 9001:2015 are critically analyzed, based on the documents elaborated by ISO/TC 176. The approach based on ISO 9001:2015 could be considered as "beginning of a new era in development of quality management systems". A comparison between the between the "old" standard ISO 9001:2008 and the "new" standard ISO 9001:2015 is made. In the second part of the paper, steps to be followed in a company to implement this new standard are presented. A peculiar attention is given to the new concept of risk-based thinking in order to support and improve application of the process based approach. The authors conclude that, by considering risk throughout the organization the likelihood of achieving stated objectives is improved, output is more consistent and customers can be confident that they will receive the expected results. Finally, the benefits of the new approach in the development of quality management systems are outlined, as well as how they are reflected in the management of companies in general and those in electronics field, in particular. As demonstrated in this paper, well understood and properly applied, the new approach based on the revised standard ISO9001:2015 could offer a better quality management for companies operating in electronics and beyond.

Electronic Publishing or Electronic Information Handling?

Science.gov (United States)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

A Functional HAZOP Methodology

DEFF Research Database (Denmark)

Liin, Netta; Lind, Morten; Jensen, Niels

2010-01-01

A HAZOP methodology is presented where a functional plant model assists in a goal oriented decomposition of the plant purpose into the means of achieving the purpose. This approach leads to nodes with simple functions from which the selection of process and deviation variables follow directly...

Evaluating six soft approaches

DEFF Research Database (Denmark)

Sørensen, Lene; Vidal, Rene Victor Valqui

2006-01-01

’s interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable for supporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology......, Strategic Option Development and Analysis, Strategic Choice Approach and Soft Systems Methodology. Evaluations of each methodology are carried out using a conceptual framework in which the organisation, the result, the process and the technology of the specific approach are taken into consideration. Using...

Transaction based approach

Science.gov (United States)

Hunka, Frantisek; Matula, Jiri

2017-07-01

Transaction based approach is utilized in some methodologies in business process modeling. Essential parts of these transactions are human beings. The notion of agent or actor role is usually used for them. The paper on a particular example describes possibilities of Design Engineering Methodology for Organizations (DEMO) and Resource-Event-Agent (REA) methodology. Whereas the DEMO methodology can be regarded as a generic methodology having its foundation in the theory of Enterprise Ontology the REA methodology is regarded as the domain specific methodology and has its origin in accountancy systems. The results of these approaches is that the DEMO methodology captures everything that happens in the reality with a good empirical evidence whereas the REA methodology captures only changes connected with economic events. Economic events represent either change of the property rights to economic resource or consumption or production of economic resources. This results from the essence of economic events and their connection to economic resources.

MODELS AND METHODS OF SAFETY-ORIENTED PROJECT MANAGEMENT OF DEVELOPMENT OF COMPLEX SYSTEMS: METHODOLOGICAL APPROACH

Directory of Open Access Journals (Sweden)

Олег Богданович ЗАЧКО

2016-03-01

Full Text Available The methods and models of safety-oriented project management of the development of complex systems are proposed resulting from the convergence of existing approaches in project management in contrast to the mechanism of value-oriented management. A cognitive model of safety oriented project management of the development of complex systems is developed, which provides a synergistic effect that is to move the system from the original (pre condition in an optimal one from the viewpoint of life safety - post-project state. The approach of assessment the project complexity is proposed, which consists in taking into account the seasonal component of a time characteristic of life cycles of complex organizational and technical systems with occupancy. This enabled to take into account the seasonal component in simulation models of life cycle of the product operation in complex organizational and technical system, modeling the critical points of operation of systems with occupancy, which forms a new methodology for safety-oriented management of projects, programs and portfolios of projects with the formalization of the elements of complexity.

New build methodology approach by Iberdrola Ingenieria y Construccion

International Nuclear Information System (INIS)

Zornoza Garcia-Andrade, Javier; Ignacio Diaz Prade, Jose; Martinez Gozalo, Ignacio; Merino Teillet, Alejandro

2014-01-01

Iberdrola Ingenieria y Construccion (hereinafter IEC) has developed a significant number of projects in several nuclear plants worldwide. Some of these plants are under operation, while others are under construction. Nowadays, IEC is actively participating in the design and construction of some safety and non-safety class systems of Flamanville 3, for EDF, has actively participated for OL4 (Finland) in one of the Nuclear Island (NI) proposal development covering for example complete NI supply chain and Licence Feasibility Study stages. Also, in the UK IEC has developed site characterization, licensing and heat sink analysis and supply chain development activities for NUGEN and is performing support engineering activities for HGNE for Wylfa. In addition, IEC performed the project for the refurbishment of Laguna Verde 1 and 2 turbine islands in Mexico, with a budget above 600 M USD. Nowadays, successful development of a new nuclear plant project in Europe, with stringent regulatory requirements for licensing and permitting which directly impact in the development of design, supply, construction and commissioning, requires successful integration of these processes by Regulatory Authority, Customer, Main Supplier and its entire supply chain. The soft integration of design, supply chain, construction and commissioning in the entire project development, will permit the application of advanced construction and engineering methodologies, as for example 'Open Top' construction or modular design, while minimizing regulatory delays. This integration represents one of the main challenges to minimize nuclear projects risk in order to successfully develop the project of a new plant considering a construction period of less than 5 year. Current paper provides a short description of proposed methodology and experiences of IEC, exposing several examples taken from actual experience in the design, supply and installation of systems in Flamanville 3 and from Olkiluoto 4

Electronic structures of elements according to ionization energies.

Science.gov (United States)

Zadeh, Dariush H

2017-11-28

The electronic structures of elements in the periodic table were analyzed using available experimental ionization energies. Two new parameters were defined to carry out the study. The first parameter-apparent nuclear charge (ANC)-quantified the overall charge of the nucleus and inner electrons observed by an outer electron during the ionization process. This parameter was utilized to define a second parameter, which presented the shielding ability of an electron against the nuclear charge. This second parameter-electron shielding effect (ESE)-provided an insight into the electronic structure of atoms. This article avoids any sort of approximation, interpolation or extrapolation. First experimental ionization energies were used to obtain the two aforementioned parameters. The second parameter (ESE) was then graphed against the electron number of each element, and was used to read the corresponding electronic structure. The ESE showed spikes/peaks at the end of each electronic shell, providing insight into when an electronic shell closes and a new one starts. The electronic structures of elements in the periodic table were mapped using this methodology. These graphs did not show complete agreement with the previously known "Aufbau" filling rule. A new filling rule was suggested based on the present observations. Finally, a new way to organize elements in the periodic table is suggested. Two earlier topics of effective nuclear charge, and shielding factor were also briefly discussed and compared numerically to demonstrate the capability of the new approach.

A practical approach for electron monitor unit calculation

International Nuclear Information System (INIS)

Choi, David; Patyal, Baldev; Cho, Jongmin; Cheng, Ing Y; Nookala, Prashanth

2009-01-01

Electron monitor unit (MU) calculation requires measured beam data such as the relative output factor (ROF) of a cone, insert correction factor (ICF) and effective source-to-surface distance (ESD). Measuring the beam data to cover all possible clinical cases is not practical for a busy clinic because it takes tremendous time and labor. In this study, we propose a practical approach to reduce the number of data measurements without affecting accuracy. It is based on two findings of dosimetric properties of electron beams. One is that the output ratio of two inserts is independent of the cone used, and the other is that ESD is a function of field size but independent of cone and jaw opening. For the measurements to prove the findings, a parallel plate ion chamber (Markus, PTW 23343) with an electrometer (Cardinal Health 35040) was used. We measured the outputs to determine ROF, ICF and ESD of different energies (5-21 MeV). Measurements were made in a Plastic Water(TM) phantom or in water. Three linear accelerators were used: Siemens MD2 (S/N 2689), Siemens Primus (S/N 3305) and Varian Clinic 21-EX (S/N 1495). With these findings, the number of data set to be measured can be reduced to less than 20% of the data points. (note)

Direct electron transfer: an approach for electrochemical biosensors with higher selectivity and sensitivity

Directory of Open Access Journals (Sweden)

Freire Renato S.

2003-01-01

Full Text Available The most promising approach for the development of electrochemical biosensors is to establish a direct electrical communication between the biomolecules and the electrode surface. This review focuses on advances, directions and strategies in the development of third generation electrochemical biosensors. Subjects covered include a brief description of the fundamentals of the electron transfer phenomenon and amperometric biosensor development (different types and new oriented enzyme immobilization techniques. Special attention is given to different redox enzymes and proteins capable of electrocatalyzing reactions via direct electron transfer. The analytical applications and future trends for third generation biosensors are also presented and discussed.

METHODOLOGICAL APPROACH TO ANALYSIS AND EVALUATION OF INFORMATION PROTECTION IN INFORMATION SYSTEMS BASED ON VULNERABILITY DANGER

Directory of Open Access Journals (Sweden)

Y. M. Krotiuk

2008-01-01

Full Text Available The paper considers a methodological approach to an analysis and estimation of information security in the information systems which is based on the analysis of vulnerabilities and an extent of their hazard. By vulnerability hazard it is meant a complexity of its operation as a part of an information system. The required and sufficient vulnerability operational conditions  have  been  determined in the paper. The paper proposes a generalized model for attack realization which is used as a basis for construction of an attack realization model for an operation of a particular vulnerability. A criterion for estimation of information protection in the information systems which is based on the estimation of vulnerability hazard is formulated in the paper. The proposed approach allows to obtain a quantitative estimation of the information system security on the basis of the proposed schemes on realization of typical attacks for the distinguished classes of vulnerabilities.The methodical approach is used for choosing variants to be applied for realization of protection mechanisms in the information systems as well as for estimation of information safety in the operating information systems.

The Development Methodology of the UML Electronic Guide

Directory of Open Access Journals (Sweden)

N.A. Magariu

2006-09-01

Full Text Available A technological model for realization of the electronic guide to UML language is considered. This model includes description of peculiarities of using the special graphic editor for constructing the UML diagrams, XML vocabularies (XMI, DocBook, SVG, XSLT for representing the text and diagrams and JavaScript code for constructing the tests.

Electron crystallography of organic pigments

International Nuclear Information System (INIS)

Boyce, G.

1997-10-01

The principle aim of this thesis is the detailing of the development and subsequent use of electron crystallographic techniques which employ the maximum entropy approach. An account is given of the electron microscope as a crystallographic instrument, along with the necessary theory involved. Also, an overview of the development of electron crystallography, as a whole, is given. This progresses to a description of the maximum entropy methodology and how use can be made of electron diffraction data in ab initio phasing techniques. Details are also given of the utilisation of image derived phases in the determination of structural information. Extensive examples are given of the use of the maximum entropy program MICE, as applied to a variety of structural problems. A particular area of interest covered by this thesis is regarding the solid state structure of organic pigments. A detailed structure review of both β-naphthol and acetoacetanilide pigments was undertaken. Information gained from this review was used as a starting point for the attempted structural elucidation of a related pigment, Barium Lake Red C. Details are given of the synthesis, electron microscope studies and subsequent ab initio phasing procedures applied in the determination of structural information on Barium Lake Red C. The final sections of this thesis detail electron crystallographic analyses of three quite different structures. Common to all was the use of maximum entropy methods, both for ab initio phasing and use of image derived phases. Overall, it is shown that electron crystallographic structure analyses using maximum entropy methods are successful using electron diffraction data and do provide distinct structural information even when significant perturbations to the data exist. (author)

Integration of infrared thermography into various maintenance methodologies

Science.gov (United States)

Morgan, William T.

1993-04-01

Maintenance methodologies are in developmental stages throughout the world as global competitiveness drives all industries to improve operational efficiencies. Rapid progress in technical advancements has added an additional strain on maintenance organizations to progressively change. Accompanying needs for advanced training and documentation is the demand for utilization of various analytical instruments and quantitative methods. Infrared thermography is one of the primary elements of engineered approaches to maintenance. Current maintenance methodologies can be divided into six categories; Routine ('Breakdown'), Preventive, Predictive, Proactive, Reliability-Based, and Total Productive (TPM) maintenance. Each of these methodologies have distinctive approaches to achieving improved operational efficiencies. Popular though is that infrared thermography is a Predictive maintenance tool. While this is true, it is also true that it can be effectively integrated into each of the maintenance methodologies for achieving desired results. The six maintenance strategies will be defined. Infrared applications integrated into each will be composed in tabular form.

Effect of methodological and ecological approaches on heterogeneity of nest-site selection of a long-lived vulture.

Directory of Open Access Journals (Sweden)

Rubén Moreno-Opo

Full Text Available The application of scientific-based conservation measures requires that sampling methodologies in studies modelling similar ecological aspects produce comparable results making easier their interpretation. We aimed to show how the choice of different methodological and ecological approaches can affect conclusions in nest-site selection studies along different Palearctic meta-populations of an indicator species. First, a multivariate analysis of the variables affecting nest-site selection in a breeding colony of cinereous vulture (Aegypius monachus in central Spain was performed. Then, a meta-analysis was applied to establish how methodological and habitat-type factors determine differences and similarities in the results obtained by previous studies that have modelled the forest breeding habitat of the species. Our results revealed patterns in nesting-habitat modelling by the cinereous vulture throughout its whole range: steep and south-facing slopes, great cover of large trees and distance to human activities were generally selected. The ratio and situation of the studied plots (nests/random, the use of plots vs. polygons as sampling units and the number of years of data set determined the variability explained by the model. Moreover, a greater size of the breeding colony implied that ecological and geomorphological variables at landscape level were more influential. Additionally, human activities affected in greater proportion to colonies situated in Mediterranean forests. For the first time, a meta-analysis regarding the factors determining nest-site selection heterogeneity for a single species at broad scale was achieved. It is essential to homogenize and coordinate experimental design in modelling the selection of species' ecological requirements in order to avoid that differences in results among studies would be due to methodological heterogeneity. This would optimize best conservation and management practices for habitats and species in

On mixed electron-photon radiation therapy optimization using the column generation approach.

Science.gov (United States)

Renaud, Marc-André; Serban, Monica; Seuntjens, Jan

2017-08-01

case resulted in the algorithm correctly emphasizing the appropriate modality. As expected, adding a single aperture per iteration yielded the lowest (best) cost function value per aperture included in the treatment plan. However, a greedier scheme was able to converge to approximately the same cost function after 125 apertures in one third of the running time. Electron apertures were on average 50-100% larger than photon apertures for all aperture addition schemes. The distribution of intensities among the available modalities followed a similar trend for all schemes, with the dominant modalities being 6 MV photons along with 6, 9 and 20 MeV electrons. The column generation method applied to mixed modality treatment planning was able to produce clinically realistic treatment plans and combined the advantages of photon and electron radiotherapy. The running time of the algorithm depended heavily on the choice of mixing scheme. Adding the highest ranked aperture for each modality provided the best trade-off between running time and plan quality for a fixed number of apertures. This work contributes an efficient methodology for the planning of mixed electron-photon treatments. © 2017 American Association of Physicists in Medicine.

A unifying probabilistic Bayesian approach to derive electron density from MRI for radiation therapy treatment planning

International Nuclear Information System (INIS)

Gudur, Madhu Sudhan Reddy; Hara, Wendy; Le, Quynh-Thu; Wang, Lei; Xing, Lei; Li, Ruijiang

2014-01-01

MRI significantly improves the accuracy and reliability of target delineation in radiation therapy for certain tumors due to its superior soft tissue contrast compared to CT. A treatment planning process with MRI as the sole imaging modality will eliminate systematic CT/MRI co-registration errors, reduce cost and radiation exposure, and simplify clinical workflow. However, MRI lacks the key electron density information necessary for accurate dose calculation and generating reference images for patient setup. The purpose of this work is to develop a unifying method to derive electron density from standard T1-weighted MRI. We propose to combine both intensity and geometry information into a unifying probabilistic Bayesian framework for electron density mapping. For each voxel, we compute two conditional probability density functions (PDFs) of electron density given its: (1) T1-weighted MRI intensity, and (2) geometry in a reference anatomy, obtained by deformable image registration between the MRI of the atlas and test patient. The two conditional PDFs containing intensity and geometry information are combined into a unifying posterior PDF, whose mean value corresponds to the optimal electron density value under the mean-square error criterion. We evaluated the algorithm’s accuracy of electron density mapping and its ability to detect bone in the head for eight patients, using an additional patient as the atlas or template. Mean absolute HU error between the estimated and true CT, as well as receiver operating characteristics for bone detection (HU > 200) were calculated. The performance was compared with a global intensity approach based on T1 and no density correction (set whole head to water). The proposed technique significantly reduced the errors in electron density estimation, with a mean absolute HU error of 126, compared with 139 for deformable registration (p = 2  ×  10 −4 ), 283 for the intensity approach (p = 2  ×  10 −6 ) and 282

Evaluating the Role of Intermediaries in the Electronic Value Chain.

Science.gov (United States)

Janssen, Marijn; Sol, Henk G.

2000-01-01

Presents a business engineering methodology that supports the identification of electronic intermediary roles in the electronic value chain. The goal of this methodology is to give stakeholders insight into their current, and possible alternative, situations by means of visualization, to evaluate the added value of business models using…

Methodology to characterize a residential building stock using a bottom-up approach: a case study applied to Belgium

Directory of Open Access Journals (Sweden)

Samuel Gendebien

2014-06-01

Full Text Available In the last ten years, the development and implementation of measures to mitigate climate change have become of major importance. In Europe, the residential sector accounts for 27% of the final energy consumption [1], and therefore contributes significantly to CO2 emissions. Roadmaps towards energy-efficient buildings have been proposed [2]. In such a context, the detailed characterization of residential building stocks in terms of age, type of construction, insulation level, energy vector, and of evolution prospects appears to be a useful contribution to the assessment of the impact of implementation of energy policies. In this work, a methodology to develop a tree-structure characterizing a residential building stock is presented in the frame of a bottom-up approach that aims to model and simulate domestic energy use. The methodology is applied to the Belgian case for the current situation and up to 2030 horizon. The potential applications of the developed tool are outlined.

Cyclical convergence of Central and Eastern European countries to the Euro area core. New methodological approach

Directory of Open Access Journals (Sweden)

Ileana ALEXE

2013-04-01

Full Text Available The current paper develops an analysis on the degree of business cycle convergence of the new member states of the EU towards the Euro area core (Germany, France, Italy, Belgium, Netherlands and Luxembourg during 1996 – 2010.Unlike the previous research, the study takes into consideration the similarity of cycles, and not their synchronization. Furthermore, from the methodological point of view, it explores the use of survey indicators in the analysis of the cycles, thus in addition to the traditional approach that employs the GDP. The results obtained through clusterization show that the degree of convergence towards Euro area core remains modest.

THEORY AND METHODOLOGY OF ICT APPLICATION INTO A SOCIAL STUDY IN ABROAD AND UKRAINE: GENERAL APPROACHES

Directory of Open Access Journals (Sweden)

Olena O. Hrytsenchuk

2011-02-01

Full Text Available The article presents an analysis of theoretical and methodological foundations of the implementation of information and communication technology (ICT in secondary education and particularly in the social sciences in Western Europe, USA and Ukraine today. Materials and documents of UNDP, Council of Europe, the Organization of European Cooperation and Development (OECD and documents legal and regulatory framework of education, school curricula and programs of foreign countries and Ukraine were researched. There are outlined approaches ICT use in subject areas of Social cycle of secondary school, the article covers some directions of national education strategies for using ICT in Western Europe, USA and Ukraine and prospects of development.

The effect of different electrodes on the electronic transmission of benzene junctions: Analytical approach

Energy Technology Data Exchange (ETDEWEB)

Mohebbi, Razie; Seyed-Yazdi, Jamileh, E-mail: j.seyedyazdi@vru.ac.ir

2016-06-01

In this paper we have investigated the electronic transmission of systems electrode–benzene–electrode using the Landauer approach. The effect of different electrodes made of metal (Au) and semiconductors (Si, TiO{sub 2}) is investigated. These three electrodes are compared between them and the results show that the electronic transmission of benzene junctions, when using semiconductor electrodes, is associated to a gap in transmission which is due to the electrodes band gap. As a consequence, a threshold voltage is necessary to obtain conducting channels.

AGR core safety assessment methodologies

International Nuclear Information System (INIS)

McLachlan, N.; Reed, J.; Metcalfe, M.P.

1996-01-01

To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

Methodologies for Social Life Cycle Assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas; Le Bocq, Agathe; Nazakina, Liudmila

2008-01-01

Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several similarit......Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several...... similarities with other social assessment tools, but in order to limit the review, only claims to address social impacts from an LCA-like framework is considered. Main Features. The review is to a large extent based on conference proceedings and reports of which some are not easily accessible, since very...... stage in the product life cycle. Another very important difference among the proposals is their position towards the use of generic data. Several of the proposals argue that social impacts are connected to the conduct of the company leading to the conclusion that each individual company in the product...

EVALUATION OF THE GRAI INTEGRATED METHODOLOGY AND THE IMAGIM SUPPORTWARE

Directory of Open Access Journals (Sweden)

J.M.C. Reid

2012-01-01

Full Text Available This paper describes the GRAI Integrated Methodology and identifies the need for computer tools to support enterprise modelling,design and integration. The IMAGIM tool is then evaluated in terms of its ability to support the GRAI Integrated Methodology. The GRAI Integrated Methodology is an Enterprise Integration methodology developed to support the design of CIM systems . The GRAI Integrated Methodology consists of the GRAI model and a structured approach. The latest addition to the methodology is the IMAGIM software tool developed by the GRAI research group for the specific purpose of supporting the methodology.

Title: Studies on drug switchability showed heterogeneity in methodological approaches: a scoping review.

Science.gov (United States)

Belleudi, Valeria; Trotta, Francesco; Vecchi, Simona; Amato, Laura; Addis, Antonio; Davoli, Marina

2018-05-16

Several drugs share the same therapeutic indication, including those undergoing patent expiration. Concerns on the interchangeability are frequent in clinical practice, challenging the evaluation of switchability through observational research. To conduct a scoping review of observational studies on drug switchability to identify methodological strategies adopted to deal with bias and confounding. We searched PubMed, EMBASE, and Web of Science (updated 1/31/2017) to identify studies evaluating switchability in terms of effectiveness/safety outcomes or compliance. Three reviewers independently screened studies extracting all characteristics. Strategies to address confounding, particularly, previous drug use and switching reasons were considered. All findings were summarized in descriptive analyses. Thirty-two studies, published in the last 10 years, met the inclusion criteria. Epilepsy, cardiovascular and rheumatology were the most frequently represented clinical areas. 75% of the studies reported data on effectiveness/safety outcomes. The most frequent study design was cohort (65.6%) followed by case-control (21.9%) and self-controlled (12.5%). Case-control and case-crossover studies showed homogeneous methodological strategies to deal with bias and confounding. Among cohort studies, the confounding associated with previous drug use was addressed introducing variables in multivariate model (47.3%) or selecting only adherent patients (14.3%). Around 30% of cohort studies did not report reasons for switching. In the remaining 70%, clinical parameters or previous occurrence of outcomes were measured to identify switching connected with lack of effectiveness or adverse events. This study represents a starting point for researchers and administrators who are approaching the investigation and assessment of issues related to interchangeability of drugs. Copyright © 2018. Published by Elsevier Inc.

Disposal Criticality Analysis Methodology Topical Report

International Nuclear Information System (INIS)

Horton, D.G.

1998-01-01

The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), a ny processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

Disposal Criticality Analysis Methodology Topical Report

International Nuclear Information System (INIS)

D.G. Horton

1998-01-01

The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), any processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

Nanodiamond Landmarks for Subcellular Multimodal Optical and Electron Imaging

Science.gov (United States)

Zurbuchen, Mark A.; Lake, Michael P.; Kohan, Sirus A.; Leung, Belinda; Bouchard, Louis-S.

2013-01-01

There is a growing need for biolabels that can be used in both optical and electron microscopies, are non-cytotoxic, and do not photobleach. Such biolabels could enable targeted nanoscale imaging of sub-cellular structures, and help to establish correlations between conjugation-delivered biomolecules and function. Here we demonstrate a sub-cellular multi-modal imaging methodology that enables localization of inert particulate probes, consisting of nanodiamonds having fluorescent nitrogen-vacancy centers. These are functionalized to target specific structures, and are observable by both optical and electron microscopies. Nanodiamonds targeted to the nuclear pore complex are rapidly localized in electron-microscopy diffraction mode to enable “zooming-in” to regions of interest for detailed structural investigations. Optical microscopies reveal nanodiamonds for in-vitro tracking or uptake-confirmation. The approach is general, works down to the single nanodiamond level, and can leverage the unique capabilities of nanodiamonds, such as biocompatibility, sensitive magnetometry, and gene and drug delivery. PMID:24036840

Robust Estimation of Electron Density From Anatomic Magnetic Resonance Imaging of the Brain Using a Unifying Multi-Atlas Approach

Energy Technology Data Exchange (ETDEWEB)

Ren, Shangjie [Tianjin Key Laboratory of Process Measurement and Control, School of Electrical Engineering and Automation, Tianjin University, Tianjin (China); Department of Radiation Oncology, Stanford University School of Medicine, Palo Alto, California (United States); Hara, Wendy; Wang, Lei; Buyyounouski, Mark K.; Le, Quynh-Thu; Xing, Lei [Department of Radiation Oncology, Stanford University School of Medicine, Palo Alto, California (United States); Li, Ruijiang, E-mail: rli2@stanford.edu [Department of Radiation Oncology, Stanford University School of Medicine, Palo Alto, California (United States)

2017-03-15

Purpose: To develop a reliable method to estimate electron density based on anatomic magnetic resonance imaging (MRI) of the brain. Methods and Materials: We proposed a unifying multi-atlas approach for electron density estimation based on standard T1- and T2-weighted MRI. First, a composite atlas was constructed through a voxelwise matching process using multiple atlases, with the goal of mitigating effects of inherent anatomic variations between patients. Next we computed for each voxel 2 kinds of conditional probabilities: (1) electron density given its image intensity on T1- and T2-weighted MR images; and (2) electron density given its spatial location in a reference anatomy, obtained by deformable image registration. These were combined into a unifying posterior probability density function using the Bayesian formalism, which provided the optimal estimates for electron density. We evaluated the method on 10 patients using leave-one-patient-out cross-validation. Receiver operating characteristic analyses for detecting different tissue types were performed. Results: The proposed method significantly reduced the errors in electron density estimation, with a mean absolute Hounsfield unit error of 119, compared with 140 and 144 (P<.0001) using conventional T1-weighted intensity and geometry-based approaches, respectively. For detection of bony anatomy, the proposed method achieved an 89% area under the curve, 86% sensitivity, 88% specificity, and 90% accuracy, which improved upon intensity and geometry-based approaches (area under the curve: 79% and 80%, respectively). Conclusion: The proposed multi-atlas approach provides robust electron density estimation and bone detection based on anatomic MRI. If validated on a larger population, our work could enable the use of MRI as a primary modality for radiation treatment planning.

A Cost-Effective Approach for Migrating Enterprise Electronic Mail Systems

Directory of Open Access Journals (Sweden)

Emmanuel Omojokun

2008-02-01

Full Text Available Electronic mail (E-mail is one of the most utilized application software systems in modern-day organizations. The major messaging application programs used in the enterprise are IBM Lotus Notes also known as Domino, Microsoft Exchange Servers, and Novel GroupWise. For various reasons – such as high cost of maintenance, undeliverable e-mail issue and loss of attachments, companies find it necessary to either migrate to newer versions of their messaging software or to an entirely different software. In either case, the process must be carefully planned, well designed and properly implemented to avoid disaster. In this paper, we present a cost-effective approach for migrating a particular messaging software. The approach was implemented and tested for the migration of GroupWise 5.5 to Exchange Server 2003. We present our success story and lessons learned from the case. A six-week and one-year post migration system-audits indicated that the organization derived several benefits including significant cost savings as a result of this particular approach. Chief information/technology officers and e-mail administrators will benefit immensely from the "best practice" strategy hereby presented.

Palladium-mediated strategies for functionalizing the dihydroazulene photoswitch: paving the way for its exploitation in molecular electronics.

Science.gov (United States)

Jevric, Martyn; Broman, Søren Lindbæk; Nielsen, Mogens Brøndsted

2013-05-03

The dihydroazulene (DHA)/vinylheptafulvene (VHF) photo/thermoswitch has attracted interest as a molecular switch for advanced materials and molecular electronics. We report here two synthetic approaches using palladium catalysis for synthesizing dihydroazulene (DHA) photoswitches with thioacetate anchoring groups intended for molecular electronics applications. The first methodology involves a Suzuki coupling using tert-butyl thioether protecting groups. Conversion to the thioacetate using boron tribromide/acetyl chloride results in the formation of the product as a mixture of regioisomers mediated by a ring-opening reaction. The second approach circumvents isomerization by the synthesis of stannanes as intermediates and their use in a Stille coupling. Although fully unsaturated azulenes are formed as byproducts during the synthesis of the DHA stannanes, this approach allowed the regioselective incorporation of the thioacetate anchoring group in either one of the two ends (positions 2 or 7) or at both.

A methodological approach to assess sensitivity to desertification in two sub-Saharan urban areas: Ouagadougou (Burkina Faso) and Saint Louis (Senegal)

Science.gov (United States)

Iavazzo, P.; Terracciano, S.; Topa, M. E.; Adamo, P.; Coly, A.; De Paola, F.; Giordano, S.; Giugni, M.; Touré, H.

2012-04-01

The United Nations Convention to Combat Desertification (UNCCD) defines desertification as "land degradation in arid, semi-arid and dry sub-humid areas resulting from various factors, including climatic variations and human activities". Desertification is regarded as one of the major global environmental problems of the 21st century and the African sub-Sahara is often quoted as the most seriously affected region with a significant loss of biological and economic productivity of the land. In this geographic area, desertification processes are usually generated by soil erosion due to climate characteristics and fluctuations, unsustainable land uses, overgrazing and inappropriate agricultural practices. Preventing desertification requires an improved understanding of its causes, impact, degree and association with climate, soil, water, land cover, socio-economic factors and their combined effects. The development of methodologies capable of managing large amounts of data in an integrated approach is needed because of the complexity and variety of forms of desertification processes. The study was carried out within the FP7-ENV-2010 CLUVA project (CLimate change and Urban Vulnerability in Africa), aimed to estimate the sensitivity to land degradation in the urban and peri-urban areas of both Ouagadougou (Burkina Faso) and Saint Louis (Senegal) cities. The approach was based on the implementation and adaptation of the modeling methodology developed within the MEDALUS project (MEditerranean Desertification and Land Use). The model is characterized by a multi-factor approach based on the assessment of both environmental quality indicators (climate, soil, vegetation) and anthropogenic factors (land management). The methodology is adaptable to the local conditions, considering that some key indicators can be operationally defined through the inclusion or exclusion of parameters and the scores assigned in order to match the specific relevance of the factors. All local data

Direct extraction of electron parameters from magnetoconductance analysis in mesoscopic ring array structures

Science.gov (United States)

Sawada, A.; Faniel, S.; Mineshige, S.; Kawabata, S.; Saito, K.; Kobayashi, K.; Sekine, Y.; Sugiyama, H.; Koga, T.

2018-05-01

We report an approach for examining electron properties using information about the shape and size of a nanostructure as a measurement reference. This approach quantifies the spin precession angles per unit length directly by considering the time-reversal interferences on chaotic return trajectories within mesoscopic ring arrays (MRAs). Experimentally, we fabricated MRAs using nanolithography in InGaAs quantum wells which had a gate-controllable spin-orbit interaction (SOI). As a result, we observed an Onsager symmetry related to relativistic magnetic fields, which provided us with indispensable information for the semiclassical billiard ball simulation. Our simulations, developed based on the real-space formalism of the weak localization/antilocalization effect including the degree of freedom for electronic spin, reproduced the experimental magnetoconductivity (MC) curves with high fidelity. The values of five distinct electron parameters (Fermi wavelength, spin precession angles per unit length for two different SOIs, impurity scattering length, and phase coherence length) were thereby extracted from a single MC curve. The methodology developed here is applicable to wide ranges of nanomaterials and devices, providing a diagnostic tool for exotic properties of two-dimensional electron systems.

[Methodological approaches to the development of environmentally benign technology for the use of solid waste in iron metallurgy].

Science.gov (United States)

Pugin, K G; Vaĭsman, Ia I

2013-01-01

On the basis of the life cycle of materials, containing wastes of iron and steel industry, new methodological approaches to the assessment of technologies of the secondary use of wastes are developed A complex criteria for selection of the technology for the use of resource potential of solid waste of iron and steel industry are developed with taking into account environmental, technological and economic indices. The technology of the use of wastes of ferrovanadium industry as bulk solid materials at the solid waste landfill is shown.

Predictors of Protean Career and the Moderating Role of Career Strategies among Professionals in Malaysian Electrical and Electronics (E & E) Industry

Science.gov (United States)

Wong, Siew Chin; Mohd Rasdi, Roziah

2015-01-01

Purpose: The purpose of this paper is to examine the effects of individually related variables and the moderating role of career strategies on protean career among professionals in Malaysian Electrical & Electronics (E & E) industry. Design/methodology/approach: Research data were gathered from a sample of 306 of professional employees in…

The Societal Nature of Subjectivity: An Interdisciplinary Methodological Challenge

Directory of Open Access Journals (Sweden)

Henning Salling Olesen

2012-09-01

Full Text Available The thematic issue presents a psycho-societal approach to qualitative empirical research in several areas of everyday social life. It is an approach which integrates a theory of subjectivity and an interpretation methodology which integrates hermeneutic experiences from text analysis and psychoanalysis. Its particular focus is on subjectivity—as an aspect of the research object and as an aspect of the research process. By the term "approach" is indicated the intrinsic connection between the theorizing of an empirical object and the reflection of the research process and the epistemic subject. In terms of methodology it revives the themes originally launched in FQS exactly ten years ago: "Subjectivity and Reflectivity in Qualitative Research" (BREUER, MRUCK & ROTH, 2002; MRUCK & BREUER, 2003. This editorial introduction presents the intellectual background of the psycho-societal methodology, reflects on its relevance and critical perspectives in a contemporary landscape of social science, and comments the way in which an international and interdisciplinary research group has developed this approach to profane empirical research. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs120345

Lean Methodology Reduces Inappropriate Use of Antipsychotics for Agitation at a Psychiatric Hospital.

Science.gov (United States)

Goga, Joshana K; Depaolo, Antonio; Khushalani, Sunil; Walters, J Ken; Roca, Robert; Zisselman, Marc; Borleis, Christopher

2017-01-01

To Evaluate the Effects of Applying Lean Methodology-Improving Quality Increasing Efficiency by Eliminating Waste and Reducing Costs-An Approach To Decrease the Prescribing Frequency of Antipsychotics for The Indication of Agitation. Historically Controlled Study. Bheppard Pratt Health System is the Largest Private Provider of Psychiatric Care in Maryland With a Total Bed Capacity of 300. There Were 4 337 Patient Days From November 1 2012 to October 31 2013 on the Dementia Unit. All Patients Admitted on the Dementia Unit Were 65 Years of Age and Older with a Primary Diagnosis of Dementia. our Multidisciplinary Team Used Lean Methodology to Identify the Root Causes and Interventions Necessary to Reduce Inappropriate Antipsychotic Use. The Primary Outcome Was Rate of Inappropriately Indicating Agitation as the Rationale When Prescribing Antipsychotic Medications. There Was a 90% (P Agitation. The Lean Methodology Interventions Led To A 90% (P Agitation and a 10% Rate Reduction in Overall Antipsychotic Prescribing. Key Words: Agitation Alzheimer's Antipsychotics Behavioral and Psychological Symptoms of Dementia Centers For Medicare & Medicaid Services Dementia Root-cause Analysis. BPSD = Behavioral and Psychological Symptoms of Dementia CATIE-AD = Clinical Antipsychotic Trials of Intervention Effectiveness in Alzheimer's Disease EMR = Electronic Medical Records GAO = Government Accountability Office GNCIS = Geriatric Neuropsychiatric Clinical Indicator Scale.

Development of a Seismic Setpoint Calculation Methodology Using a Safety System Approach

International Nuclear Information System (INIS)

Lee, Chang Jae; Baik, Kwang Il; Lee, Sang Jeong

2013-01-01

The Automatic Seismic Trip System (ASTS) automatically actuates reactor trip when it detects seismic activities whose magnitudes are comparable to a Safe Shutdown Earthquake (SSE), which is the maximum hypothetical earthquake at the nuclear power plant site. To ensure that the reactor is tripped before the magnitude of earthquake exceeds the SSE, it is crucial to reasonably determine the seismic setpoint. The trip setpoint and allowable value for the ASTS for Advanced Power Reactor (APR) 1400 Nuclear Power Plants (NPPs) were determined by the methodology presented in this paper. The ASTS that trips the reactor when a large earthquake occurs is categorized as a non safety system because the system is not required by design basis event criteria. This means ASTS has neither specific analytical limit nor dedicated setpoint calculation methodology. Therefore, we developed the ASTS setpoint calculation methodology by conservatively considering that of PPS. By incorporating the developed methodology into the ASTS for APR1400, the more conservative trip setpoint and allowable value were determined. In addition, the ZPA from the Operating Basis Earthquake (OBE) FRS of the floor where the sensor module is located is 0.1g. Thus, the allowance of 0.17g between OBE of 0.1 g and ASTS trip setpoint of 0.27 g is sufficient to prevent the reactor trip before the magnitude of the earthquake exceeds the OBE. In result, the developed ASTS setpoint calculation methodology is evaluated as reasonable in both aspects of the safety and performance of the NPPs. This will be used to determine the ASTS trip setpoint and allowable for newly constructed plants

Applying GRADE-CERQual to qualitative evidence synthesis findings-paper 3: how to assess methodological limitations.

Science.gov (United States)

Munthe-Kaas, Heather; Bohren, Meghan A; Glenton, Claire; Lewin, Simon; Noyes, Jane; Tunçalp, Özge; Booth, Andrew; Garside, Ruth; Colvin, Christopher J; Wainwright, Megan; Rashidian, Arash; Flottorp, Signe; Carlsen, Benedicte

2018-01-25

The GRADE-CERQual (Confidence in Evidence from Reviews of Qualitative research) approach has been developed by the GRADE (Grading of Recommendations Assessment, Development and Evaluation) Working Group. The approach has been developed to support the use of findings from qualitative evidence syntheses in decision-making, including guideline development and policy formulation. CERQual includes four components for assessing how much confidence to place in findings from reviews of qualitative research (also referred to as qualitative evidence syntheses): (1) methodological limitations, (2) coherence, (3) adequacy of data and (4) relevance. This paper is part of a series providing guidance on how to apply CERQual and focuses on CERQual's methodological limitations component. We developed the methodological limitations component by searching the literature for definitions, gathering feedback from relevant research communities and developing consensus through project group meetings. We tested the CERQual methodological limitations component within several qualitative evidence syntheses before agreeing on the current definition and principles for application. When applying CERQual, we define methodological limitations as the extent to which there are concerns about the design or conduct of the primary studies that contributed evidence to an individual review finding. In this paper, we describe the methodological limitations component and its rationale and offer guidance on how to assess methodological limitations of a review finding as part of the CERQual approach. This guidance outlines the information required to assess methodological limitations component, the steps that need to be taken to assess methodological limitations of data contributing to a review finding and examples of methodological limitation assessments. This paper provides guidance for review authors and others on undertaking an assessment of methodological limitations in the context of the CERQual

Towards more sustainable management of European food waste: Methodological approach and numerical application.

Science.gov (United States)

Manfredi, Simone; Cristobal, Jorge

2016-09-01

Trying to respond to the latest policy needs, the work presented in this article aims at developing a life-cycle based framework methodology to quantitatively evaluate the environmental and economic sustainability of European food waste management options. The methodology is structured into six steps aimed at defining boundaries and scope of the evaluation, evaluating environmental and economic impacts and identifying best performing options. The methodology is able to accommodate additional assessment criteria, for example the social dimension of sustainability, thus moving towards a comprehensive sustainability assessment framework. A numerical case study is also developed to provide an example of application of the proposed methodology to an average European context. Different options for food waste treatment are compared, including landfilling, composting, anaerobic digestion and incineration. The environmental dimension is evaluated with the software EASETECH, while the economic assessment is conducted based on different indicators expressing the costs associated with food waste management. Results show that the proposed methodology allows for a straightforward identification of the most sustainable options for food waste, thus can provide factual support to decision/policy making. However, it was also observed that results markedly depend on a number of user-defined assumptions, for example on the choice of the indicators to express the environmental and economic performance. © The Author(s) 2016.

Electron-impact ionization of oriented molecules using the time-dependent close-coupling approach

Energy Technology Data Exchange (ETDEWEB)

Colgan, J [Theoretical Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Pindzola, M S, E-mail: jcolgan@lanl.gov [Department of Physics, Auburn University, Auburn, AL 36849 (United States)

2011-04-01

An overview is given on recent progress on computing triple differential cross sections for electron-impact ionization of the hydrogen molecule using a time-dependent close-coupling approach. Our calculations, when averaged over all molecular orientations, are generally in very good agreement with (e,2e) measurements made on H{sub 2}, where the molecular orientation is unknown, for a range of incident energies and outgoing electron angles and energies. In this paper, we present TDCS for ionization of H{sub 2} at specific molecular orientations. It is hoped that this study will help stimulate future measurements of TDCS from oriented H{sub 2} at medium impact energies.

An Alternative Methodological Approach for Cost-Effectiveness Analysis and Decision Making in Genomic Medicine.

Science.gov (United States)

Fragoulakis, Vasilios; Mitropoulou, Christina; van Schaik, Ron H; Maniadakis, Nikolaos; Patrinos, George P

2016-05-01

Genomic Medicine aims to improve therapeutic interventions and diagnostics, the quality of life of patients, but also to rationalize healthcare costs. To reach this goal, careful assessment and identification of evidence gaps for public health genomics priorities are required so that a more efficient healthcare environment is created. Here, we propose a public health genomics-driven approach to adjust the classical healthcare decision making process with an alternative methodological approach of cost-effectiveness analysis, which is particularly helpful for genomic medicine interventions. By combining classical cost-effectiveness analysis with budget constraints, social preferences, and patient ethics, we demonstrate the application of this model, the Genome Economics Model (GEM), based on a previously reported genome-guided intervention from a developing country environment. The model and the attendant rationale provide a practical guide by which all major healthcare stakeholders could ensure the sustainability of funding for genome-guided interventions, their adoption and coverage by health insurance funds, and prioritization of Genomic Medicine research, development, and innovation, given the restriction of budgets, particularly in developing countries and low-income healthcare settings in developed countries. The implications of the GEM for the policy makers interested in Genomic Medicine and new health technology and innovation assessment are also discussed.

Problems and Projects Based Approach For Analog Electronic Circuits' Course

Directory of Open Access Journals (Sweden)

Vahé Nerguizian

2009-04-01

Full Text Available New educational methods and approaches are recently introduced and implemented at several North American and European universities using Problems and Projects Based Approach (PPBA. The PPBA employs a teaching technique based mostly on competences/skills rather than only on knowledge. This method has been implemented and proven by several pedagogical instructors and authors at several educational institutions. This approach is used at different disciplines such as medicine, biology, engineering and many others. It has the advantage to improve the student's skills and the knowledge retention rate, and reflects the 21st century industrial/company needs and demands. Before implementing this approach to a course, a good resources preparation and planning is needed upfront by the responsible or instructor of the course to achieve the course and students related objectives. This paper presents the preparation, the generated documentation and the implementation of a pilot project utilizing PPBA education for a second year undergraduate electronic course over a complete semester, and for two different class groups (morning and evening groups. The outcome of this project (achieved goals, observed difficulties and lessons learned is presented based on different tools such as students 'in class' communication and feedback, different course evaluation forms and the professor/instructor feedback. Resources, challenges, difficulties and recommendations are also assessed and presented. The impact, the effect and the results (during and at the end of the academic fall session of the PPBA on students and instructor are discussed, validated, managed and communicated to help other instructor in taking appropriate approach decisions with respect to this new educational approach compared to the classical one.

Formalizing the Austrian Procedure Catalogue: A 4-step methodological analysis approach.

Science.gov (United States)

Neururer, Sabrina Barbara; Lasierra, Nelia; Peiffer, Karl Peter; Fensel, Dieter

2016-04-01

health interventions: (1) Procedural type, (2) Anatomical site, (3) Medical device, (4) Pathology, (5) Access, (6) Body system, (7) Population, (8) Aim, (9) Discipline, (10) Technique, and (11) Body Function. These main characteristics were taken as input of classes for the formalization of the APC. We were also able to identify relevant relations between classes. The proposed four-step approach for formalizing the APC provides a novel, systematically developed, strong framework to semantically enrich procedure classifications. Although this methodology was designed to address the particularities of the APC, the included methods are based on generic analysis tasks, and therefore can be re-used to provide a systematic representation of other procedure catalogs or classification systems and hence contribute towards a universal alignment of such representations, if desired. Copyright © 2015 Elsevier Inc. All rights reserved.

Towards a Methodology for the Design of Multimedia Public Access Interfaces.

Science.gov (United States)

Rowley, Jennifer

1998-01-01

Discussion of information systems methodologies that can contribute to interface design for public access systems covers: the systems life cycle; advantages of adopting information systems methodologies; soft systems methodologies; task-oriented approaches to user interface design; holistic design, the Star model, and prototyping; the…

Human Computer Interactions in Next-Generation of Aircraft Smart Navigation Management Systems: Task Analysis and Architecture under an Agent-Oriented Methodological Approach

Science.gov (United States)

Canino-Rodríguez, José M.; García-Herrero, Jesús; Besada-Portas, Juan; Ravelo-García, Antonio G.; Travieso-González, Carlos; Alonso-Hernández, Jesús B.

2015-01-01

The limited efficiency of current air traffic systems will require a next-generation of Smart Air Traffic System (SATS) that relies on current technological advances. This challenge means a transition toward a new navigation and air-traffic procedures paradigm, where pilots and air traffic controllers perform and coordinate their activities according to new roles and technological supports. The design of new Human-Computer Interactions (HCI) for performing these activities is a key element of SATS. However efforts for developing such tools need to be inspired on a parallel characterization of hypothetical air traffic scenarios compatible with current ones. This paper is focused on airborne HCI into SATS where cockpit inputs came from aircraft navigation systems, surrounding traffic situation, controllers’ indications, etc. So the HCI is intended to enhance situation awareness and decision-making through pilot cockpit. This work approach considers SATS as a system distributed on a large-scale with uncertainty in a dynamic environment. Therefore, a multi-agent systems based approach is well suited for modeling such an environment. We demonstrate that current methodologies for designing multi-agent systems are a useful tool to characterize HCI. We specifically illustrate how the selected methodological approach provides enough guidelines to obtain a cockpit HCI design that complies with future SATS specifications. PMID:25746092

Human computer interactions in next-generation of aircraft smart navigation management systems: task analysis and architecture under an agent-oriented methodological approach.

Science.gov (United States)

Canino-Rodríguez, José M; García-Herrero, Jesús; Besada-Portas, Juan; Ravelo-García, Antonio G; Travieso-González, Carlos; Alonso-Hernández, Jesús B

2015-03-04

The limited efficiency of current air traffic systems will require a next-generation of Smart Air Traffic System (SATS) that relies on current technological advances. This challenge means a transition toward a new navigation and air-traffic procedures paradigm, where pilots and air traffic controllers perform and coordinate their activities according to new roles and technological supports. The design of new Human-Computer Interactions (HCI) for performing these activities is a key element of SATS. However efforts for developing such tools need to be inspired on a parallel characterization of hypothetical air traffic scenarios compatible with current ones. This paper is focused on airborne HCI into SATS where cockpit inputs came from aircraft navigation systems, surrounding traffic situation, controllers' indications, etc. So the HCI is intended to enhance situation awareness and decision-making through pilot cockpit. This work approach considers SATS as a system distributed on a large-scale with uncertainty in a dynamic environment. Therefore, a multi-agent systems based approach is well suited for modeling such an environment. We demonstrate that current methodologies for designing multi-agent systems are a useful tool to characterize HCI. We specifically illustrate how the selected methodological approach provides enough guidelines to obtain a cockpit HCI design that complies with future SATS specifications.

Human Computer Interactions in Next-Generation of Aircraft Smart Navigation Management Systems: Task Analysis and Architecture under an Agent-Oriented Methodological Approach

Directory of Open Access Journals (Sweden)

José M. Canino-Rodríguez

2015-03-01

Full Text Available The limited efficiency of current air traffic systems will require a next-generation of Smart Air Traffic System (SATS that relies on current technological advances. This challenge means a transition toward a new navigation and air-traffic procedures paradigm, where pilots and air traffic controllers perform and coordinate their activities according to new roles and technological supports. The design of new Human-Computer Interactions (HCI for performing these activities is a key element of SATS. However efforts for developing such tools need to be inspired on a parallel characterization of hypothetical air traffic scenarios compatible with current ones. This paper is focused on airborne HCI into SATS where cockpit inputs came from aircraft navigation systems, surrounding traffic situation, controllers’ indications, etc. So the HCI is intended to enhance situation awareness and decision-making through pilot cockpit. This work approach considers SATS as a system distributed on a large-scale with uncertainty in a dynamic environment. Therefore, a multi-agent systems based approach is well suited for modeling such an environment. We demonstrate that current methodologies for designing multi-agent systems are a useful tool to characterize HCI. We specifically illustrate how the selected methodological approach provides enough guidelines to obtain a cockpit HCI design that complies with future SATS specifications.

A deep convolutional neural network approach to single-particle recognition in cryo-electron microscopy.

Science.gov (United States)

Zhu, Yanan; Ouyang, Qi; Mao, Youdong

2017-07-21

Single-particle cryo-electron microscopy (cryo-EM) has become a mainstream tool for the structural determination of biological macromolecular complexes. However, high-resolution cryo-EM reconstruction often requires hundreds of thousands of single-particle images. Particle extraction from experimental micrographs thus can be laborious and presents a major practical bottleneck in cryo-EM structural determination. Existing computational methods for particle picking often use low-resolution templates for particle matching, making them susceptible to reference-dependent bias. It is critical to develop a highly efficient template-free method for the automatic recognition of particle images from cryo-EM micrographs. We developed a deep learning-based algorithmic framework, DeepEM, for single-particle recognition from noisy cryo-EM micrographs, enabling automated particle picking, selection and verification in an integrated fashion. The kernel of DeepEM is built upon a convolutional neural network (CNN) composed of eight layers, which can be recursively trained to be highly "knowledgeable". Our approach exhibits an improved performance and accuracy when tested on the standard KLH dataset. Application of DeepEM to several challenging experimental cryo-EM datasets demonstrated its ability to avoid the selection of un-wanted particles and non-particles even when true particles contain fewer features. The DeepEM methodology, derived from a deep CNN, allows automated particle extraction from raw cryo-EM micrographs in the absence of a template. It demonstrates an improved performance, objectivity and accuracy. Application of this novel method is expected to free the labor involved in single-particle verification, significantly improving the efficiency of cryo-EM data processing.

A New Approach in Teaching Power Electronics Control of Electrical Drives using Real-Time

DEFF Research Database (Denmark)

Teodorescu, Remus; Bech, Michael Møller; Blaabjerg, Frede

2000-01-01

A new approach in teaching power electronics and electrical drives is achieved at the Flexible Drives System Laboratory (FDSL) from Aalborg University by using the new Total Development Environment (TDE) concept that allows a full visual block-oriented programming of dynamic real-time systems...

Organization and methodology approach for the safety assessment of the present situation and the future works on Chernobyl-4 and the site

International Nuclear Information System (INIS)

Bachner, D.; Benoist, E.; Duco, J.; Jahns, A.

1995-01-01

This work deals with the organization and methodology approach for the safety assessment of the present situation and the future works on Chernobyl 4 and the site. It presents the results of a common preliminary discussion in order to formulate advices on the basic management of the Chernobyl safety assessment process. (O.L.)

Hanford Site baseline risk assessment methodology

International Nuclear Information System (INIS)

1993-03-01

This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

Methodologic approach for the Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project.

Science.gov (United States)

Namaste, Sorrel Ml; Aaron, Grant J; Varadhan, Ravi; Peerson, Janet M; Suchdev, Parminder S

2017-07-01

Background: The Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project is a multiagency and multicountry collaboration that was formed to improve micronutrient assessment and to better characterize anemia. Objectives: The aims of the project were to 1 ) identify factors associated with inflammation, 2 ) assess the relations between inflammation, malaria infection, and biomarkers of iron and vitamin A status and compare adjustment approaches, and 3 ) assess risk factors for anemia in preschool children (PSC) and women of reproductive age (WRA). Design: The BRINDA database inclusion criteria included surveys that 1 ) were conducted after 2004, 2 ) had target groups of PSC, WRA, or both, and 3 ) used a similar laboratory methodology for the measurement of ≥1 biomarker of iron [ferritin or soluble transferrin receptor or vitamin A status (retinol-binding protein or retinol)] and ≥1 biomarker of inflammation (α-1-acid glycoprotein or C-reactive protein). Individual data sets were standardized and merged into a BRINDA database comprising 16 nationally and regionally representative surveys from 14 countries. Collectively, the database covered all 6 WHO geographic regions and contained ∼30,000 PSC and 27,000 WRA. Data were analyzed individually and combined with the use of a meta-analysis. Results: The methods that were used to standardize the BRINDA database and the analytic approaches used to address the project's research questions are presented in this article. Three approaches to adjust micronutrient biomarker concentrations in the presence of inflammation and malaria infection are presented, along with an anemia conceptual framework that guided the BRINDA project's anemia analyses. Conclusions: The BRINDA project refines approaches to interpret iron and vitamin A biomarker values in settings of inflammation and malaria infection and suggests the use of a new regression approach as well as proposes an anemia framework to

Total skin high-dose-rate electron therapy dosimetry using TG-51

International Nuclear Information System (INIS)

Gossman, Michael S.; Sharma, Subhash C.

2004-01-01

An approach to dosimetry for total skin electron therapy (TSET) is discussed using the currently accepted TG-51 high-energy calibration protocol. The methodology incorporates water phantom data for absolute calibration and plastic phantom data for efficient reference dosimetry. The scheme is simplified to include the high-dose-rate mode conversion and provides support for its use, as it becomes more available on newer linear accelerators. Using a 6-field, modified Stanford technique, one may follow the process for accurate determination of absorbed dose

Detecting fatigue thresholds from electromyographic signals: A systematic review on approaches and methodologies.

Science.gov (United States)

Ertl, Peter; Kruse, Annika; Tilp, Markus

2016-10-01

The aim of the current paper was to systematically review the relevant existing electromyographic threshold concepts within the literature. The electronic databases MEDLINE and SCOPUS were screened for papers published between January 1980 and April 2015 including the keywords: neuromuscular fatigue threshold, anaerobic threshold, electromyographic threshold, muscular fatigue, aerobic-anaerobictransition, ventilatory threshold, exercise testing, and cycle-ergometer. 32 articles were assessed with regard to their electromyographic methodologies, description of results, statistical analysis and test protocols. Only one article was of very good quality. 21 were of good quality and two articles were of very low quality. The review process revealed that: (i) there is consistent evidence of one or two non-linear increases of EMG that might reflect the additional recruitment of motor units (MU) or different fiber types during fatiguing cycle ergometer exercise, (ii) most studies reported no statistically significant difference between electromyographic and metabolic thresholds, (iii) one minute protocols with increments between 10 and 25W appear most appropriate to detect muscular threshold, (iv) threshold detection from the vastus medialis, vastus lateralis, and rectus femoris is recommended, and (v) there is a great variety in study protocols, measurement techniques, and data processing. Therefore, we recommend further research and standardization in the detection of EMGTs. Copyright © 2016 Elsevier Ltd. All rights reserved.

A methodological approach to studying resilience mechanisms: demonstration of utility in age and Alzheimer's disease-related brain pathology.

Science.gov (United States)

Wolf, Dominik; Fischer, Florian Udo; Fellgiebel, Andreas

2018-05-01

The present work aims at providing a methodological approach for the investigation of resilience factors and mechanisms in normal aging, Alzheimer's disease (AD) and other neurodegenerative disorders. By expanding and re-conceptualizing traditional regression approaches, we propose an approach that not only aims at identifying potential resilience factors but also allows for a differentiation between general and dynamic resilience factors in terms of their association with pathology. Dynamic resilience factors are characterized by an increasing relevance with increasing levels of pathology, while the relevance of general resilience factors is independent of the amount of pathology. Utility of the approach is demonstrated in age and AD-related brain pathology by investigating widely accepted resilience factors, including education and brain volume. Moreover, the approach is used to test hippocampal volume as potential resilience factor. Education and brain volume could be identified as general resilience factors against age and AD-related pathology. Beyond that, analyses highlighted that hippocampal volume may not only be disease target but also serve as a potential resilience factor in age and AD-related pathology, particularly at higher levels of tau-pathology (i.e. dynamic resilience factor). Given its unspecific and superordinate nature the approach is suitable for the investigation of a wide range of potential resilience factors in normal aging, AD and other neurodegenerative disorders. Consequently, it may find a wide application and thereby promote the comparability between studies.

An analytical approach to characterize morbidity profile dissimilarity between distinct cohorts using electronic medical records

OpenAIRE

Schildcrout, Jonathan S.; Basford, Melissa A.; Pulley, Jill M.; Masys, Daniel R.; Roden, Dan M.; Wang, Deede; Chute, Christopher G.; Kullo, Iftikhar J.; Carrell, David; Peissig, Peggy; Kho, Abel; Denny, Joshua C.

2010-01-01

We describe a two-stage analytical approach for characterizing morbidity profile dissimilarity among patient cohorts using electronic medical records. We capture morbidities using the International Statistical Classification of Diseases and Related Health Problems (ICD-9) codes. In the first stage of the approach separate logistic regression analyses for ICD-9 sections (e.g., “hypertensive disease” or “appendicitis”) are conducted, and the odds ratios that describe adjusted differences in pre...

A methodology to measure the degre of managerial innovation

OpenAIRE

Ayhan, Mustafa Batuhan; Oztemel, Ercan

2014-01-01

Purpose: The main objective of this study is to introduce the concept of managerial innovation and to propose a quantitative methodology to measure the degree of managerial innovation capability by analyzing the evolution of the techniques used for management functions.Design/methodology/approach: The methodology mainly focuses on the different techniques used for each management functions namely; Planning, Organizing, Leading, Controlling and Coordinating. These functions are studied and the...

A constructivist approach for teaching research methodology in construction management

NARCIS (Netherlands)

Hartmann, Andreas; Doree, Andries G.; Martin, Ludwig

2010-01-01

Construction Management (CM) is an acknowledged field of expertise and profession that requires students to research real world problems. To prepare the students for this task, many CM programs contain a Research Methodology (RM) course. However, after taking part in these courses, many students

The electronic structure of molecules by a many-body approach. Pt. 1

International Nuclear Information System (INIS)

Niessen, W. von; Cederbaum, L.S.; Kraemer, W.P.

1976-01-01

The ionization potentials of benzene are studied by an ab initio many-body approach which includes the effects of electron correlation and reorganization beyond the one-particle approximation. The calculations confirm the assignment of the photoelectron spectrum experimentally proposed by Jonsson and Lindholm: 1esub(1g)(π), 2esub(2g), 1asub(2u)(π), 2esub(1u), 1bsub(2u), 1bsub(1u), 2asub(1g), 1esub(2g) in order of increasing binding energy. To definitely establish the ordering of the ionization potentials in the second band, which has been very controversial, the corresponding vibrational structure has been calculated. A number of one-electron properties are calculated in the one-particle approximation and compared to experimental work and other theoretical calculations. (orig.) [de

Predicting human miRNA target genes using a novel evolutionary methodology

KAUST Repository

Aigli, Korfiati; Kleftogiannis, Dimitrios A.; Konstantinos, Theofilatos; Spiros, Likothanassis; Athanasios, Tsakalidis; Seferina, Mavroudi

2012-01-01

The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

Predicting human miRNA target genes using a novel evolutionary methodology

KAUST Repository

Aigli, Korfiati

2012-01-01

The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3\\'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

Qualitative and quantitative research in Sociolinguistics: methodological dadaism?

Directory of Open Access Journals (Sweden)

Caroline Rodrigues Cardoso

2013-07-01

Full Text Available The confluence between quantitative and qualitative research in Sociolinguistics is a methodological Dadaism? The issue here is not epistemology, because I assume that the Sociolinguistics studies the language linked to social. I want to demonstrate that the methodological approach depends on the research question, ie, the subject about which a thesis is developed.

Base line definitions and methodological lessons from Zimbabwe

International Nuclear Information System (INIS)

Maya, R.S.

1995-01-01

The UNEP Greenhouse Gas Abatement Costing Studies carried out under the management of the UNEP Collaborating Centre On Energy and Environment at Risoe National Laboratories in Denmark has placed effort in generating methodological approaches to assessing the cost of abatement activities to reduce CO 2 emissions. These efforts have produced perhaps the most comprehensive set of methodological approaches to defining and assessing the cost of greenhouse gas abatement. Perhaps the most importance aspect of the UNEP study which involved teams of researchers from ten countries is the mix of countries in which the studies were conducted and hence the representation of views and concepts from researchers in these countries particularly those from developing countries namely, Zimbabwe, India, Venezuela, Brazil, Thailand and Senegal. Methodological lessons from Zimbabwe, therefore, would have benefited from the interactions with methodological experiences form the other participating countries. Methodological lessons from the Zimbabwean study can be placed in two categories. One relates to the modelling of tools to analyze economic trends and the various factors studied in order to determine the unit cost of CO 2 abatement. The other is the definition of factors influencing the levels of emissions reducible and those realised under specific economic trends. (au)

Methodology for combining dynamic responses

International Nuclear Information System (INIS)

Cudlin, R.; Hosford, S.; Mattu, R.; Wichman, K.

1978-09-01

The NRC has historically required that the structural/mechanical responses due to various accident loads and loads caused by natural phenomena, (such as earthquakes) be combined when analyzing structures, systems, and components important to safety. Several approaches to account for the potential interaction of loads resulting from accidents and natural phenomena have been used. One approach, the so-called absolute or linear summation (ABS) method, linearly adds the peak structural responses due to the individual dynamic loads. In general, the ABS method has also reflected the staff's conservative preference for the combination of dynamic load responses. A second approach, referred to as SRSS, yields a combined response equal to the square root of the sum of the squares of the peak responses due to the individual dynamic loads. The lack of a physical relationship between some of the loads has raised questions as to the proper methodology to be used in the design of nuclear power plants. An NRR Working Group was constituted to examine load combination methodologies and to develop a recommendation concerning criteria or conditions for their application. Evaluations of and recommendations on the use of the ABS and SRSS methods are provided in the report

Compact femtosecond electron diffractometer with 100 keV electron bunches approaching the single-electron pulse duration limit

International Nuclear Information System (INIS)

Waldecker, Lutz; Bertoni, Roman; Ernstorfer, Ralph

2015-01-01

We present the design and implementation of a highly compact femtosecond electron diffractometer working at electron energies up to 100 keV. We use a multi-body particle tracing code to simulate electron bunch propagation through the setup and to calculate pulse durations at the sample position. Our simulations show that electron bunches containing few thousands of electrons per bunch are only weakly broadened by space-charge effects and their pulse duration is thus close to the one of a single-electron wavepacket. With our compact setup, we can create electron bunches containing up to 5000 electrons with a pulse duration below 100 fs on the sample. We use the diffractometer to track the energy transfer from photoexcited electrons to the lattice in a thin film of titanium. This process takes place on the timescale of few-hundred femtoseconds and a fully equilibrated state is reached within 1 ps

A Neural Network Approach for Identifying Particle Pitch Angle Distributions in Van Allen Probes Data

Science.gov (United States)

Souza, V. M.; Vieira, L. E. A.; Medeiros, C.; Da Silva, L. A.; Alves, L. R.; Koga, D.; Sibeck, D. G.; Walsh, B. M.; Kanekal, S. G.; Jauer, P. R.;

Shaping the Electronic Library--The UW-Madison Approach.

Science.gov (United States)

Dean, Charles W., Ed.; Frazier, Ken; Pope, Nolan F.; Gorman, Peter C.; Dentinger, Sue; Boston, Jeanne; Phillips, Hugh; Daggett, Steven C.; Lundquist, Mitch; McClung, Mark; Riley, Curran; Allan, Craig; Waugh, David

1998-01-01

This special theme section describes the University of Wisconsin-Madison's experience building its Electronic Library. Highlights include integrating resources and services; the administrative framework; the public electronic library, including electronic publishing capability and access to World Wide Web-based and other electronic resources;…

Theory and methodology in predicting the religious tourism in Buddhist regions of Russia

Directory of Open Access Journals (Sweden)

Petr E. Tsarkov

2015-11-01

Full Text Available Article reviews the theoretical and methodological aspects of forecasting the touristic migrations. The theoretical approach is designed according to the anthropological theory of cultural exchange, tourism forecasting methodology developed by the author basing on an interdisciplinary approach. The author facilitates an original approach which assesses the touristic potential of Buddhist regions of Russia on the basis of their aesthetic appeal.

Electronics lab instructors' approaches to troubleshooting instruction

Science.gov (United States)

Dounas-Frazer, Dimitri R.; Lewandowski, H. J.

2017-06-01

In this exploratory qualitative study, we describe instructors' self-reported practices for teaching and assessing students' ability to troubleshoot in electronics lab courses. We collected audio data from interviews with 20 electronics instructors from 18 institutions that varied by size, selectivity, and other factors. In addition to describing participants' instructional practices, we characterize their perceptions about the role of troubleshooting in electronics, the importance of the ability to troubleshoot more generally, and what it means for students to be competent troubleshooters. One major finding of this work is that, while almost all instructors in our study said that troubleshooting is an important learning outcome for students in electronics lab courses, only half of instructors said they directly assessed students' ability to troubleshoot. Based on our findings, we argue that there is a need for research-based instructional materials that attend to both cognitive and noncognitive aspects of troubleshooting proficiency. We also identify several areas for future investigation related to troubleshooting instruction in electronics lab courses.

The probabilistic approach in the licensing process and the development of probabilistic risk assessment methodology in Japan

International Nuclear Information System (INIS)

Togo, Y.; Sato, K.

1981-01-01

The probabilistic approach has long seemed to be one of the most comprehensive methods for evaluating the safety of nuclear plants. So far, most of the guidelines and criteria for licensing are based on the deterministic concept. However, there have been a few examples to which the probabilistic approach was directly applied, such as the evaluation of aircraft crashes and turbine missiles. One may find other examples of such applications. However, a much more important role is now to be played by this concept, in implementing the 52 recommendations from the lessons learned from the TMI accident. To develop the probabilistic risk assessment methodology most relevant to Japanese situations, a five-year programme plan has been adopted and is to be conducted by the Japan Atomic Research Institute from fiscal 1980. Various problems have been identified and are to be solved through this programme plan. The current status of developments is described together with activities outside the government programme. (author)

A bioelectrochemical approach to characterize extracellular electron transfer by Synechocystis sp. PCC6803.

Directory of Open Access Journals (Sweden)

Angelo Cereda

Full Text Available Biophotovoltaic devices employ photosynthetic organisms at the anode of a microbial fuel cell to generate electrical power. Although a range of cyanobacteria and algae have been shown to generate photocurrent in devices of a multitude of architectures, mechanistic understanding of extracellular electron transfer by phototrophs remains minimal. Here we describe a mediatorless bioelectrochemical device to measure the electrogenic output of a planktonically grown cyanobacterium, Synechocystis sp. PCC6803. Light dependent production of current is measured, and its magnitude is shown to scale with microbial cell concentration and light intensity. Bioelectrochemical characterization of a Synechocystis mutant lacking Photosystem II demonstrates conclusively that production of the majority of photocurrent requires a functional water splitting aparatus and electrons are likely ultimately derived from water. This shows the potential of the device to rapidly and quantitatively characterize photocurrent production by genetically modified strains, an approach that can be used in future studies to delineate the mechanisms of cyanobacterial extracellular electron transport.

Demonstration of an infiltration evaluation methodology

International Nuclear Information System (INIS)

Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

1990-07-01

An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

Si quantum dots for nano electronics: From materials to applications

International Nuclear Information System (INIS)

Lombardo, S.; Spinella, C.; Rimini, E.

2005-01-01

This paper reviews the subject of Si quantum dots embedded in dielectric and its application to the realization of non volatile semiconductor memories. In the first part of the paper various approaches for the analysis of the materials through transmission electron microscopy (TEM) are critically discussed. The advantages coming from an innovative application of energy filtered TEM are put in clear evidence. The paper then focuses on the synthesis of the materials: two different methodologies for the realization of the dots, both based on chemical vapor deposition are described in detail, and physical models providing some understanding of the observed phenomenology are reported. We then discuss the application of this nano technology to the realization of the storage nodes in non volatile semiconductor memories. The following sections describe the electrical characteristics found in the test devices and some key aspects are described in terms of quantitative models. The test devices show several performance advantages, indicating that the approach is an excellent candidate for the realization of Flash memories of the nano electronic era

Numerical methodologies for investigation of moderate-velocity flow using a hybrid computational fluid dynamics - molecular dynamics simulation approach

International Nuclear Information System (INIS)

Ko, Soon Heum; Kim, Na Yong; Nikitopoulos, Dimitris E.; Moldovan, Dorel; Jha, Shantenu

2014-01-01

Numerical approaches are presented to minimize the statistical errors inherently present due to finite sampling and the presence of thermal fluctuations in the molecular region of a hybrid computational fluid dynamics (CFD) - molecular dynamics (MD) flow solution. Near the fluid-solid interface the hybrid CFD-MD simulation approach provides a more accurate solution, especially in the presence of significant molecular-level phenomena, than the traditional continuum-based simulation techniques. It also involves less computational cost than the pure particle-based MD. Despite these advantages the hybrid CFD-MD methodology has been applied mostly in flow studies at high velocities, mainly because of the higher statistical errors associated with low velocities. As an alternative to the costly increase of the size of the MD region to decrease statistical errors, we investigate a few numerical approaches that reduce sampling noise of the solution at moderate-velocities. These methods are based on sampling of multiple simulation replicas and linear regression of multiple spatial/temporal samples. We discuss the advantages and disadvantages of each technique in the perspective of solution accuracy and computational cost.

Environmental Zoning: Some methodological implications

NARCIS (Netherlands)

Ike, Paul; Voogd, Henk

1991-01-01

The purpose of this article is to discuss some methodological problems of environmental zoning. The principle of environmental zoning will be elaborated. In addition an overview is given of a number of approaches that have been followed in practice to arrive at an integral judgement. Finally some

An overall methodology for reliability prediction of mechatronic systems design with industrial application

International Nuclear Information System (INIS)

Habchi, Georges; Barthod, Christine

2016-01-01

We propose in this paper an overall ten-step methodology dedicated to the analysis and quantification of reliability during the design phase of a mechatronic system, considered as a complex system. The ten steps of the methodology are detailed according to the downward side of the V-development cycle usually used for the design of complex systems. Two main phases of analysis are complementary and cover the ten steps, qualitative analysis and quantitative analysis. The qualitative phase proposes to analyze the functional and dysfunctional behavior of the system and then determine its different failure modes and degradation states, based on external and internal functional analysis, organic and physical implementation, and dependencies between components, with consideration of customer specifications and mission profile. The quantitative phase is used to calculate the reliability of the system and its components, based on the qualitative behavior patterns, and considering data gathering and processing and reliability targets. Systemic approach is used to calculate the reliability of the system taking into account: the different technologies of a mechatronic system (mechanics, electronics, electrical .), dependencies and interactions between components and external influencing factors. To validate the methodology, the ten steps are applied to an industrial system, the smart actuator of Pack'Aero Company. - Highlights: • A ten-step methodology for reliability prediction of mechatronic systems design. • Qualitative and quantitative analysis for reliability evaluation using PN and RBD. • A dependency matrix proposal, based on the collateral and functional interactions. • Models consider mission profile, deterioration, interactions and influent factors. • Application and validation of the methodology on the “Smart Actuator” of PACK’AERO.

Summarizing systematic reviews: methodological development, conduct and reporting of an umbrella review approach.

Science.gov (United States)

Aromataris, Edoardo; Fernandez, Ritin; Godfrey, Christina M; Holly, Cheryl; Khalil, Hanan; Tungpunkom, Patraporn

2015-09-01

With the increase in the number of systematic reviews available, a logical next step to provide decision makers in healthcare with the evidence they require has been the conduct of reviews of existing systematic reviews. Syntheses of existing systematic reviews are referred to by many different names, one of which is an umbrella review. An umbrella review allows the findings of reviews relevant to a review question to be compared and contrasted. An umbrella review's most characteristic feature is that this type of evidence synthesis only considers for inclusion the highest level of evidence, namely other systematic reviews and meta-analyses. A methodology working group was formed by the Joanna Briggs Institute to develop methodological guidance for the conduct of an umbrella review, including diverse types of evidence, both quantitative and qualitative. The aim of this study is to describe the development and guidance for the conduct of an umbrella review. Discussion and testing of the elements of methods for the conduct of an umbrella review were held over a 6-month period by members of a methodology working group. The working group comprised six participants who corresponded via teleconference, e-mail and face-to-face meeting during this development period. In October 2013, the methodology was presented in a workshop at the Joanna Briggs Institute Convention. Workshop participants, review authors and methodologists provided further testing, critique and feedback on the proposed methodology. This study describes the methodology and methods developed for the conduct of an umbrella review that includes published systematic reviews and meta-analyses as the analytical unit of the review. Details are provided regarding the essential elements of an umbrella review, including presentation of the review question in a Population, Intervention, Comparator, Outcome format, nuances of the inclusion criteria and search strategy. A critical appraisal tool with 10 questions to

Primary processes of the electron-protic species coupling in pure aqueous phases: - femtosecond laser spectroscopy study; - quantum approach of the electron-water interaction

International Nuclear Information System (INIS)

Pommeret, Stanislas

1991-01-01

This thesis work deals with the coupling mechanisms between an electron, water molecules or protic species (hydronium ion, hydroxyl radical). Two complementary studies have been carry out in pure aqueous phases. The first one is concerned with the structural aspect of the hydrated electron which is studied via a semi-quantum approach Splitting Operator Method. The results indicates the importance of the second hydration shell in the localisation of an electron at 77 and 300 Kelvin. The second part of this work relates to the dynamic of the primary processes in light or heavy water at room temperature: the ion-molecule reaction, radical pair formation, geminate recombination of the hydrated electron with the hydronium ion and the hydroxyl radical. The dynamic of these reactions is studied by time resolved absorption spectroscopy from the near infrared to the near ultraviolet with a few tens femto-seconds temporal precision. The analysis of the primary processes takes into account the protic properties of water molecules. (author) [fr

Methodological Approaches in Conducting Overviews: Current State in HTA Agencies

Science.gov (United States)

Pieper, Dawid; Antoine, Sunya-Lee; Morfeld, Jana-Carina; Mathes, Tim; Eikermann, Michaela

2014-01-01

Objectives: Overviews search for reviews rather than for primary studies. They might have the potential to support decision making within a shorter time frame by reducing production time. We aimed to summarize available instructions for authors intending to conduct overviews as well as the currently applied methodology of overviews in…

Fully Stochastic Distributed Methodology for Multivariate Flood Frequency Analysis

Directory of Open Access Journals (Sweden)

Isabel Flores-Montoya

2016-05-01

Full Text Available An adequate estimation of the extreme behavior of basin response is essential both for designing river structures and for evaluating their risk. The aim of this paper is to develop a new methodology to generate extreme hydrograph series of thousands of years using an event-based model. To this end, a spatial-temporal synthetic rainfall generator (RainSimV3 is combined with a distributed physically-based rainfall–runoff event-based model (RIBS. The use of an event-based model allows simulating longer hydrograph series with less computational and data requirements but need to characterize the initial basis state, which depends on the initial basin moisture distribution. To overcome this problem, this paper proposed a probabilistic calibration–simulation approach, which considers the initial state and the model parameters as random variables characterized by a probability distribution though a Monte Carlo simulation. This approach is compared with two other approaches, the deterministic and the semi-deterministic approaches. Both approaches use a unique initial state. The deterministic approach also uses a unique value of the model parameters while the semi-deterministic approach obtains these values from its probability distribution through a Monte Carlo simulation, considering the basin variability. This methodology has been applied to the Corbès and Générargues basins, in the Southeast of France. The results show that the probabilistic approach offers the best fit. That means that the proposed methodology can be successfully used to characterize the extreme behavior of the basin considering the basin variability and overcoming the basin initial state problem.

Methodology for Modeling and Analysis of Business Processes (MMABP

Directory of Open Access Journals (Sweden)

Vaclav Repa

2015-10-01

Full Text Available This paper introduces the methodology for modeling business processes. Creation of the methodology is described in terms of the Design Science Method. Firstly, the gap in contemporary Business Process Modeling approaches is identified and general modeling principles which can fill the gap are discussed. The way which these principles have been implemented in the main features of created methodology is described. Most critical identified points of the business process modeling are process states, process hierarchy and the granularity of process description. The methodology has been evaluated by use in the real project. Using the examples from this project the main methodology features are explained together with the significant problems which have been met during the project. Concluding from these problems together with the results of the methodology evaluation the needed future development of the methodology is outlined.

Computational Methodologies for Developing Structure–Morphology–Performance Relationships in Organic Solar Cells: A Protocol Review

KAUST Repository

Do, Khanh

2016-09-08

We outline a step-by-step protocol that incorporates a number of theoretical and computational methodologies to evaluate the structural and electronic properties of pi-conjugated semiconducting materials in the condensed phase. Our focus is on methodologies appropriate for the characterization, at the molecular level, of the morphology in blend systems consisting of an electron donor and electron acceptor, of importance for understanding the performance properties of bulk-heterojunction organic solar cells. The protocol is formulated as an introductory manual for investigators who aim to study the bulk-heterojunction morphology in molecular details, thereby facilitating the development of structure morphology property relationships when used in tandem with experimental results.

Sensing single electrons with single molecules

International Nuclear Information System (INIS)

Plakhotnik, Taras

2007-01-01

We propose a new methodology for probing transport of just one electron, a process of great importance both in nature and in artificial devices. Our idea for locating a single electron is analogues to the conventional GPS where signals from several satellites are used to locate a macro object. Using fluorescent molecules as tiny sensors, it is possible to determine 3D displacement vector of an electron

Identifying Opportunities for Decision Support Systems in Support of Regional Resource Use Planning: An Approach Through Soft Systems Methodology.

Science.gov (United States)

Zhu; Dale

2000-10-01

/ Regional resource use planning relies on key regional stakeholder groups using and having equitable access to appropriate social, economic, and environmental information and assessment tools. Decision support systems (DSS) can improve stakeholder access to such information and analysis tools. Regional resource use planning, however, is a complex process involving multiple issues, multiple assessment criteria, multiple stakeholders, and multiple values. There is a need for an approach to DSS development that can assist in understanding and modeling complex problem situations in regional resource use so that areas where DSSs could provide effective support can be identified, and the user requirements can be well established. This paper presents an approach based on the soft systems methodology for identifying DSS opportunities for regional resource use planning, taking the Central Highlands Region of Queensland, Australia, as a case study.

Study of methodology diversification in diagnostics

International Nuclear Information System (INIS)

Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Hasegawa, Makoto

1999-03-01

There are several research activities to enhance safety and reliability of nuclear power plant operation and maintenance. We are developing a concept of an autonomous operation system where the role of operators is replaced with artificial intelligence. The purpose of the study described in this report is to develop a operator support system in abnormal plant situations. Conventionally, diagnostic modules based on individual methodology such as expert system have been developed and verified. In this report, methodology diversification is considered to integrate diagnostic modules which performance are confirmed using information processing technique. Technical issues to be considered in diagnostic methodology diversification are; 1)reliability of input data, 2)diversification of knowledge models, algorithms and reasoning schemes, 3)mutual complement and robustness. The diagnostic module utilizing the different approaches defined along with strategy of diversification was evaluated using fast breeder plant simulator. As a result, we confirmed that any singular diagnostic module can not meet accuracy criteria for the entire set of anomaly events. In contrast with this, we confirmed that every abnormality could be precisely diagnosed by a mutual combination. In other words, legitimacy of approach selected by strategy of diversification was shown, and methodology diversification attained clear efficiency for abnormal diagnosis. It has been also confirmed that the diversified diagnostic system implemented in this study is able to maintain its accuracy even in case that encountered scale of abnormality is different from reference cases embedded in the knowledge base. (author)

Methodological guide for the implementation of a workstation radiation protection optimization approach: case of the external exposure of the whole body. Report nr 305

International Nuclear Information System (INIS)

Bataille, C.; Boucher, A.; Schieber, C.

2008-02-01

The first part of this report presents the different steps of the radiation protection optimization approach and proposes some methodological elements for its implementation when designing a maintenance or modification operation. For each step of this optimization approach, the guide presents objectives, peculiarities, recommendations to deepen the approach. The second part proposes a set of technical forms related to the study and the implementation of some actions aimed at dose reduction. These actions are notably: circuit rinsing, decontamination of an irradiation source, setting up of biological protections, removal of an irradiating component, tele-dosimetry, and so on